diff options
Diffstat (limited to 'drivers/clk/qcom/clk-alpha-pll.c')
-rw-r--r-- | drivers/clk/qcom/clk-alpha-pll.c | 91 |
1 files changed, 85 insertions, 6 deletions
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index 055318f97991..7c2936da9b14 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -878,6 +878,14 @@ static long clk_trion_pll_round_rate(struct clk_hw *hw, unsigned long rate, return clamp(rate, min_freq, max_freq); } +const struct clk_ops clk_alpha_pll_fixed_ops = { + .enable = clk_alpha_pll_enable, + .disable = clk_alpha_pll_disable, + .is_enabled = clk_alpha_pll_is_enabled, + .recalc_rate = clk_alpha_pll_recalc_rate, +}; +EXPORT_SYMBOL_GPL(clk_alpha_pll_fixed_ops); + const struct clk_ops clk_alpha_pll_ops = { .enable = clk_alpha_pll_enable, .disable = clk_alpha_pll_disable, @@ -1024,6 +1032,25 @@ void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap, regmap_write(regmap, PLL_CONFIG_CTL(pll), config->config_ctl_val); + if (config->config_ctl_hi_val) + regmap_write(regmap, PLL_CONFIG_CTL_U(pll), + config->config_ctl_hi_val); + + if (config->user_ctl_val) + regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val); + + if (config->user_ctl_hi_val) + regmap_write(regmap, PLL_USER_CTL_U(pll), + config->user_ctl_hi_val); + + if (config->test_ctl_val) + regmap_write(regmap, PLL_TEST_CTL(pll), + config->test_ctl_val); + + if (config->test_ctl_hi_val) + regmap_write(regmap, PLL_TEST_CTL_U(pll), + config->test_ctl_hi_val); + if (config->post_div_mask) { mask = config->post_div_mask; val = config->post_div_val; @@ -1141,14 +1168,9 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate) { struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); - u32 val, l, alpha_width = pll_alpha_width(pll); + u32 l, alpha_width = pll_alpha_width(pll); u64 a; unsigned long rrate; - int ret = 0; - - ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val); - if (ret) - return ret; rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width); @@ -1167,7 +1189,64 @@ static int alpha_pll_fabia_set_rate(struct clk_hw *hw, unsigned long rate, return __clk_alpha_pll_update_latch(pll); } +static int alpha_pll_fabia_prepare(struct clk_hw *hw) +{ + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw); + const struct pll_vco *vco; + struct clk_hw *parent_hw; + unsigned long cal_freq, rrate; + u32 cal_l, val, alpha_width = pll_alpha_width(pll); + u64 a; + int ret; + + /* Check if calibration needs to be done i.e. PLL is in reset */ + ret = regmap_read(pll->clkr.regmap, PLL_MODE(pll), &val); + if (ret) + return ret; + + /* Return early if calibration is not needed. */ + if (val & PLL_RESET_N) + return 0; + + vco = alpha_pll_find_vco(pll, clk_hw_get_rate(hw)); + if (!vco) { + pr_err("alpha pll: not in a valid vco range\n"); + return -EINVAL; + } + + cal_freq = DIV_ROUND_CLOSEST((pll->vco_table[0].min_freq + + pll->vco_table[0].max_freq) * 54, 100); + + parent_hw = clk_hw_get_parent(hw); + if (!parent_hw) + return -EINVAL; + + rrate = alpha_pll_round_rate(cal_freq, clk_hw_get_rate(parent_hw), + &cal_l, &a, alpha_width); + /* + * Due to a limited number of bits for fractional rate programming, the + * rounded up rate could be marginally higher than the requested rate. + */ + if (rrate > (cal_freq + FABIA_PLL_RATE_MARGIN) || rrate < cal_freq) + return -EINVAL; + + /* Setup PLL for calibration frequency */ + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), cal_l); + + /* Bringup the PLL at calibration frequency */ + ret = clk_alpha_pll_enable(hw); + if (ret) { + pr_err("alpha pll calibration failed\n"); + return ret; + } + + clk_alpha_pll_disable(hw); + + return 0; +} + const struct clk_ops clk_alpha_pll_fabia_ops = { + .prepare = alpha_pll_fabia_prepare, .enable = alpha_pll_fabia_enable, .disable = alpha_pll_fabia_disable, .is_enabled = clk_alpha_pll_is_enabled, |