diff options
Diffstat (limited to 'drivers/clk/clk-aspeed.c')
| -rw-r--r-- | drivers/clk/clk-aspeed.c | 59 |
1 files changed, 44 insertions, 15 deletions
diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 38b366b00c57..7b70a074095d 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -24,7 +24,7 @@ #define ASPEED_MPLL_PARAM 0x20 #define ASPEED_HPLL_PARAM 0x24 #define AST2500_HPLL_BYPASS_EN BIT(20) -#define AST2400_HPLL_STRAPPED BIT(18) +#define AST2400_HPLL_PROGRAMMED BIT(18) #define AST2400_HPLL_BYPASS_EN BIT(17) #define ASPEED_MISC_CTRL 0x2c #define UART_DIV13_EN BIT(12) @@ -91,8 +91,8 @@ static const struct aspeed_gate_data aspeed_gates[] = { [ASPEED_CLK_GATE_GCLK] = { 1, 7, "gclk-gate", NULL, 0 }, /* 2D engine */ [ASPEED_CLK_GATE_MCLK] = { 2, -1, "mclk-gate", "mpll", CLK_IS_CRITICAL }, /* SDRAM */ [ASPEED_CLK_GATE_VCLK] = { 3, 6, "vclk-gate", NULL, 0 }, /* Video Capture */ - [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", 0 }, /* PCIe/PCI */ - [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, 0 }, /* DAC */ + [ASPEED_CLK_GATE_BCLK] = { 4, 8, "bclk-gate", "bclk", CLK_IS_CRITICAL }, /* PCIe/PCI */ + [ASPEED_CLK_GATE_DCLK] = { 5, -1, "dclk-gate", NULL, CLK_IS_CRITICAL }, /* DAC */ [ASPEED_CLK_GATE_REFCLK] = { 6, -1, "refclk-gate", "clkin", CLK_IS_CRITICAL }, [ASPEED_CLK_GATE_USBPORT2CLK] = { 7, 3, "usb-port2-gate", NULL, 0 }, /* USB2.0 Host port 2 */ [ASPEED_CLK_GATE_LCLK] = { 8, 5, "lclk-gate", NULL, 0 }, /* LPC */ @@ -212,9 +212,22 @@ static int aspeed_clk_is_enabled(struct clk_hw *hw) { struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw); u32 clk = BIT(gate->clock_idx); + u32 rst = BIT(gate->reset_idx); u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk; u32 reg; + /* + * If the IP is in reset, treat the clock as not enabled, + * this happens with some clocks such as the USB one when + * coming from cold reset. Without this, aspeed_clk_enable() + * will fail to lift the reset. + */ + if (gate->reset_idx >= 0) { + regmap_read(gate->map, ASPEED_RESET_CTRL, ®); + if (reg & rst) + return 0; + } + regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, ®); return ((reg & clk) == enval) ? 1 : 0; @@ -565,29 +578,45 @@ builtin_platform_driver(aspeed_clk_driver); static void __init aspeed_ast2400_cc(struct regmap *map) { struct clk_hw *hw; - u32 val, freq, div; + u32 val, div, clkin, hpll; + const u16 hpll_rates[][4] = { + {384, 360, 336, 408}, + {400, 375, 350, 425}, + }; + int rate; /* * CLKIN is the crystal oscillator, 24, 48 or 25MHz selected by * strapping */ regmap_read(map, ASPEED_STRAP, &val); - if (val & CLKIN_25MHZ_EN) - freq = 25000000; - else if (val & AST2400_CLK_SOURCE_SEL) - freq = 48000000; - else - freq = 24000000; - hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, freq); - pr_debug("clkin @%u MHz\n", freq / 1000000); + rate = (val >> 8) & 3; + if (val & CLKIN_25MHZ_EN) { + clkin = 25000000; + hpll = hpll_rates[1][rate]; + } else if (val & AST2400_CLK_SOURCE_SEL) { + clkin = 48000000; + hpll = hpll_rates[0][rate]; + } else { + clkin = 24000000; + hpll = hpll_rates[0][rate]; + } + hw = clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, clkin); + pr_debug("clkin @%u MHz\n", clkin / 1000000); /* * High-speed PLL clock derived from the crystal. This the CPU clock, - * and we assume that it is enabled + * and we assume that it is enabled. It can be configured through the + * HPLL_PARAM register, or set to a specified frequency by strapping. */ regmap_read(map, ASPEED_HPLL_PARAM, &val); - WARN(val & AST2400_HPLL_STRAPPED, "hpll is strapped not configured"); - aspeed_clk_data->hws[ASPEED_CLK_HPLL] = aspeed_ast2400_calc_pll("hpll", val); + if (val & AST2400_HPLL_PROGRAMMED) + hw = aspeed_ast2400_calc_pll("hpll", val); + else + hw = clk_hw_register_fixed_rate(NULL, "hpll", "clkin", 0, + hpll * 1000000); + + aspeed_clk_data->hws[ASPEED_CLK_HPLL] = hw; /* * Strap bits 11:10 define the CPU/AHB clock frequency ratio (aka HCLK) |