diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/agp/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/char/agp/i460-agp.c | 2 | ||||
| -rw-r--r-- | drivers/char/apm-emulation.c | 4 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_bt_sm.c | 2 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 3 | ||||
| -rw-r--r-- | drivers/char/n_r3964.c | 1 | ||||
| -rw-r--r-- | drivers/char/pcmcia/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/char/pcmcia/cm4000_cs.c | 2 | ||||
| -rw-r--r-- | drivers/char/stallion.c | 4 | ||||
| -rw-r--r-- | drivers/char/tpm/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/char/tpm/tpm_infineon.c | 2 |
11 files changed, 13 insertions, 15 deletions
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index 5ddf67e76f8b..fcd867d923ba 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -34,7 +34,7 @@ config AGP_ALI X on the following ALi chipsets. The supported chipsets include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. For the ALi-chipset question, ALi suggests you refer to - <http://www.ali.com.tw/eng/support/index.shtml>. + <http://www.ali.com.tw/>. The M1541 chipset can do AGP 1x and 2x, but note that there is an acknowledged incompatibility with Matrox G200 cards. Due to diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index e763d3312ce7..75b763cb3ea1 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -1,7 +1,7 @@ /* * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of * the "Intel 460GTX Chipset Software Developer's Manual": - * http://developer.intel.com/design/itanium/downloads/24870401s.htm + * http://www.intel.com/design/archives/itanium/downloads/248704.htm */ /* * 460GX support by Chris Ahna <christopher.j.ahna@intel.com> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index 3022801669b1..45b987c9889e 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -7,8 +7,8 @@ * Intel Corporation, Microsoft Corporation. Advanced Power Management * (APM) BIOS Interface Specification, Revision 1.2, February 1996. * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] + * This document is available from Microsoft at: + * http://www.microsoft.com/whdc/archive/amp_12.mspx */ #include <linux/module.h> #include <linux/poll.h> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index 7b98c067190a..3ed20e8abc0d 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -2,7 +2,7 @@ * ipmi_bt_sm.c * * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part - * of the driver architecture at http://sourceforge.net/project/openipmi + * of the driver architecture at http://sourceforge.net/projects/openipmi * * Author: Rocky Craig <first.last@hp.com> * diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 7bd7c45b53ef..e537610d2f09 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) /* * Defined at - * http://h21007.www2.hp.com/portal/download/files - * /unprot/hpspmi.pdf + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf */ struct SPMITable { s8 Signature[4]; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index a98290d7a2c5..88dda0c45ee0 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -4,7 +4,6 @@ * Copyright by * Philips Automation Projects * Kassel (Germany) - * http://www.pap-philips.de * ----------------------------------------------------------- * This software may be used and distributed according to the terms of * the GNU General Public License, incorporated herein by reference. diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index ffa0efce0aed..6614416a8623 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -28,7 +28,7 @@ config CARDMAN_4000 This kernel driver requires additional userspace support, either by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), - or via the cm4000 backend of OpenCT (http://www.opensc.com/). + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). config CARDMAN_4040 tristate "Omnikey CardMan 4040 support" @@ -41,7 +41,7 @@ config CARDMAN_4040 in I/O space. To use the kernel driver, you will need either the PC/SC ifdhandler provided from the Omnikey homepage (http://www.omnikey.com/), or a current development version of OpenCT - (http://www.opensc.org/). + (http://www.opensc-project.org/opensc). config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 6835c23e9a51..d962f25dcc2a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1666,7 +1666,7 @@ static int cmm_open(struct inode *inode, struct file *filp) /* opening will always block since the * monitor will be started by open, which * means we have to wait for ATR becoming - * vaild = block until valid (or card + * valid = block until valid (or card * inserted) */ if (filp->f_flags & O_NONBLOCK) { diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 8ef16490810c..4bef6ab83622 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -3181,7 +3181,7 @@ static void stl_cd1400flush(struct stlport *portp) /* * Return the current state of data flow on this port. This is only - * really interresting when determining if data has fully completed + * really interesting when determining if data has fully completed * transmission or not... This is easy for the cd1400, it accurately * maintains the busy port flag. */ @@ -4131,7 +4131,7 @@ static void stl_sc26198flush(struct stlport *portp) /* * Return the current state of data flow on this port. This is only - * really interresting when determining if data has fully completed + * really interesting when determining if data has fully completed * transmission or not... The sc26198 interrupt scheme cannot * determine when all data has actually drained, so we need to * check the port statusy register to be sure. diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 4dc338f3d1aa..f6595aba4f0f 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -58,6 +58,6 @@ config TCG_INFINEON To compile this driver as a module, choose M here; the module will be called tpm_infineon. Further information on this driver and the supported hardware - can be found at http://www.prosec.rub.de/tpm + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ endif # TCG_TPM diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index f58440791e65..76da32e11f18 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -7,7 +7,7 @@ * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com> * Sirrix AG - security technologies, http://www.sirrix.com and * Applied Data Security Group, Ruhr-University Bochum, Germany - * Project-Homepage: http://www.prosec.rub.de/tpm + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as |