diff options
Diffstat (limited to 'drivers/char/vme_scc.c')
| -rw-r--r-- | drivers/char/vme_scc.c | 1145 |
1 files changed, 0 insertions, 1145 deletions
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c deleted file mode 100644 index 12de1202d22c..000000000000 --- a/drivers/char/vme_scc.c +++ /dev/null @@ -1,1145 +0,0 @@ -/* - * drivers/char/vme_scc.c: MVME147, MVME162, BVME6000 SCC serial ports - * implementation. - * Copyright 1999 Richard Hirst <richard@sleepie.demon.co.uk> - * - * Based on atari_SCC.c which was - * Copyright 1994-95 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de> - * Partially based on PC-Linux serial.c by Linus Torvalds and Theodore Ts'o - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - * - */ - -#include <linux/module.h> -#include <linux/kdev_t.h> -#include <asm/io.h> -#include <linux/kernel.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/errno.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/mm.h> -#include <linux/serial.h> -#include <linux/fcntl.h> -#include <linux/major.h> -#include <linux/delay.h> -#include <linux/miscdevice.h> -#include <linux/console.h> -#include <linux/init.h> -#include <asm/setup.h> -#include <asm/bootinfo.h> - -#ifdef CONFIG_MVME147_SCC -#include <asm/mvme147hw.h> -#endif -#ifdef CONFIG_MVME162_SCC -#include <asm/mvme16xhw.h> -#endif -#ifdef CONFIG_BVME6000_SCC -#include <asm/bvme6000hw.h> -#endif - -#include <linux/generic_serial.h> -#include "scc.h" - - -#define CHANNEL_A 0 -#define CHANNEL_B 1 - -#define SCC_MINOR_BASE 64 - -/* Shadows for all SCC write registers */ -static unsigned char scc_shadow[2][16]; - -/* Location to access for SCC register access delay */ -static volatile unsigned char *scc_del = NULL; - -/* To keep track of STATUS_REG state for detection of Ext/Status int source */ -static unsigned char scc_last_status_reg[2]; - -/***************************** Prototypes *****************************/ - -/* Function prototypes */ -static void scc_disable_tx_interrupts(void * ptr); -static void scc_enable_tx_interrupts(void * ptr); -static void scc_disable_rx_interrupts(void * ptr); -static void scc_enable_rx_interrupts(void * ptr); -static int scc_carrier_raised(struct tty_port *port); -static void scc_shutdown_port(void * ptr); -static int scc_set_real_termios(void *ptr); -static void scc_hungup(void *ptr); -static void scc_close(void *ptr); -static int scc_chars_in_buffer(void * ptr); -static int scc_open(struct tty_struct * tty, struct file * filp); -static int scc_ioctl(struct tty_struct * tty, struct file * filp, - unsigned int cmd, unsigned long arg); -static void scc_throttle(struct tty_struct *tty); -static void scc_unthrottle(struct tty_struct *tty); -static irqreturn_t scc_tx_int(int irq, void *data); -static irqreturn_t scc_rx_int(int irq, void *data); -static irqreturn_t scc_stat_int(int irq, void *data); -static irqreturn_t scc_spcond_int(int irq, void *data); -static void scc_setsignals(struct scc_port *port, int dtr, int rts); -static int scc_break_ctl(struct tty_struct *tty, int break_state); - -static struct tty_driver *scc_driver; - -static struct scc_port scc_ports[2]; - -/*--------------------------------------------------------------------------- - * Interface from generic_serial.c back here - *--------------------------------------------------------------------------*/ - -static struct real_driver scc_real_driver = { - scc_disable_tx_interrupts, - scc_enable_tx_interrupts, - scc_disable_rx_interrupts, - scc_enable_rx_interrupts, - scc_shutdown_port, - scc_set_real_termios, - scc_chars_in_buffer, - scc_close, - scc_hungup, - NULL -}; - - -static const struct tty_operations scc_ops = { - .open = scc_open, - .close = gs_close, - .write = gs_write, - .put_char = gs_put_char, - .flush_chars = gs_flush_chars, - .write_room = gs_write_room, - .chars_in_buffer = gs_chars_in_buffer, - .flush_buffer = gs_flush_buffer, - .ioctl = scc_ioctl, - .throttle = scc_throttle, - .unthrottle = scc_unthrottle, - .set_termios = gs_set_termios, - .stop = gs_stop, - .start = gs_start, - .hangup = gs_hangup, - .break_ctl = scc_break_ctl, -}; - -static const struct tty_port_operations scc_port_ops = { - .carrier_raised = scc_carrier_raised, -}; - -/*---------------------------------------------------------------------------- - * vme_scc_init() and support functions - *---------------------------------------------------------------------------*/ - -static int __init scc_init_drivers(void) -{ - int error; - - scc_driver = alloc_tty_driver(2); - if (!scc_driver) - return -ENOMEM; - scc_driver->owner = THIS_MODULE; - scc_driver->driver_name = "scc"; - scc_driver->name = "ttyS"; - scc_driver->major = TTY_MAJOR; - scc_driver->minor_start = SCC_MINOR_BASE; - scc_driver->type = TTY_DRIVER_TYPE_SERIAL; - scc_driver->subtype = SERIAL_TYPE_NORMAL; - scc_driver->init_termios = tty_std_termios; - scc_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - scc_driver->init_termios.c_ispeed = 9600; - scc_driver->init_termios.c_ospeed = 9600; - scc_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(scc_driver, &scc_ops); - - if ((error = tty_register_driver(scc_driver))) { - printk(KERN_ERR "scc: Couldn't register scc driver, error = %d\n", - error); - put_tty_driver(scc_driver); - return 1; - } - - return 0; -} - - -/* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1). - */ - -static void __init scc_init_portstructs(void) -{ - struct scc_port *port; - int i; - - for (i = 0; i < 2; i++) { - port = scc_ports + i; - tty_port_init(&port->gs.port); - port->gs.port.ops = &scc_port_ops; - port->gs.magic = SCC_MAGIC; - port->gs.close_delay = HZ/2; - port->gs.closing_wait = 30 * HZ; - port->gs.rd = &scc_real_driver; -#ifdef NEW_WRITE_LOCKING - port->gs.port_write_mutex = MUTEX; -#endif - init_waitqueue_head(&port->gs.port.open_wait); - init_waitqueue_head(&port->gs.port.close_wait); - } -} - - -#ifdef CONFIG_MVME147_SCC -static int __init mvme147_scc_init(void) -{ - struct scc_port *port; - int error; - - printk(KERN_INFO "SCC: MVME147 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)M147_SCC_A_ADDR; - port->datap = port->ctrlp + 1; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, MVME147_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)M147_SCC_B_ADDR; - port->datap = port->ctrlp + 1; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Ensure interrupts are enabled in the PCC chip */ - m147_pcc->serial_cntrl=PCC_LEVEL_SERIAL|PCC_INT_ENAB; - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail_free_b_rx: - free_irq(MVME147_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(MVME147_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(MVME147_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(MVME147_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(MVME147_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(MVME147_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(MVME147_IRQ_SCCA_TX, port); -fail: - return error; -} -#endif - - -#ifdef CONFIG_MVME162_SCC -static int __init mvme162_scc_init(void) -{ - struct scc_port *port; - int error; - - if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA)) - return (-ENODEV); - - printk(KERN_INFO "SCC: MVME162 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)MVME_SCC_A_ADDR; - port->datap = port->ctrlp + 2; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, MVME162_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)MVME_SCC_B_ADDR; - port->datap = port->ctrlp + 2; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); /* Either channel will do */ - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Ensure interrupts are enabled in the MC2 chip */ - *(volatile char *)0xfff4201d = 0x14; - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail_free_b_rx: - free_irq(MVME162_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(MVME162_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(MVME162_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(MVME162_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(MVME162_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(MVME162_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(MVME162_IRQ_SCCA_TX, port); -fail: - return error; -} -#endif - - -#ifdef CONFIG_BVME6000_SCC -static int __init bvme6000_scc_init(void) -{ - struct scc_port *port; - int error; - - printk(KERN_INFO "SCC: BVME6000 Serial Driver\n"); - /* Init channel A */ - port = &scc_ports[0]; - port->channel = CHANNEL_A; - port->ctrlp = (volatile unsigned char *)BVME_SCC_A_ADDR; - port->datap = port->ctrlp + 4; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED, - "SCC-A TX", port); - if (error) - goto fail; - error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-A status", port); - if (error) - goto fail_free_a_tx; - error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED, - "SCC-A RX", port); - if (error) - goto fail_free_a_stat; - error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-A special cond", port); - if (error) - goto fail_free_a_rx; - - { - SCC_ACCESS_INIT(port); - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - /* Set the interrupt vector */ - SCCwrite(INT_VECTOR_REG, BVME_IRQ_SCC_BASE); - /* Interrupt parameters: vector includes status, status low */ - SCCwrite(MASTER_INT_CTRL, MIC_VEC_INCL_STAT); - SCCmod(MASTER_INT_CTRL, 0xff, MIC_MASTER_INT_ENAB); - } - - /* Init channel B */ - port = &scc_ports[1]; - port->channel = CHANNEL_B; - port->ctrlp = (volatile unsigned char *)BVME_SCC_B_ADDR; - port->datap = port->ctrlp + 4; - port->port_a = &scc_ports[0]; - port->port_b = &scc_ports[1]; - error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED, - "SCC-B TX", port); - if (error) - goto fail_free_a_spcond; - error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED, - "SCC-B status", port); - if (error) - goto fail_free_b_tx; - error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED, - "SCC-B RX", port); - if (error) - goto fail_free_b_stat; - error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, - IRQF_DISABLED, "SCC-B special cond", port); - if (error) - goto fail_free_b_rx; - - { - SCC_ACCESS_INIT(port); /* Either channel will do */ - - /* disable interrupts for this channel */ - SCCwrite(INT_AND_DMA_REG, 0); - } - - /* Initialise the tty driver structures and register */ - scc_init_portstructs(); - scc_init_drivers(); - - return 0; - -fail: - free_irq(BVME_IRQ_SCCA_STAT, port); -fail_free_a_tx: - free_irq(BVME_IRQ_SCCA_RX, port); -fail_free_a_stat: - free_irq(BVME_IRQ_SCCA_SPCOND, port); -fail_free_a_rx: - free_irq(BVME_IRQ_SCCB_TX, port); -fail_free_a_spcond: - free_irq(BVME_IRQ_SCCB_STAT, port); -fail_free_b_tx: - free_irq(BVME_IRQ_SCCB_RX, port); -fail_free_b_stat: - free_irq(BVME_IRQ_SCCB_SPCOND, port); -fail_free_b_rx: - return error; -} -#endif - - -static int __init vme_scc_init(void) -{ - int res = -ENODEV; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - res = mvme147_scc_init(); -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - res = mvme162_scc_init(); -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - res = bvme6000_scc_init(); -#endif - return res; -} - -module_init(vme_scc_init); - - -/*--------------------------------------------------------------------------- - * Interrupt handlers - *--------------------------------------------------------------------------*/ - -static irqreturn_t scc_rx_int(int irq, void *data) -{ - unsigned char ch; - struct scc_port *port = data; - struct tty_struct *tty = port->gs.port.tty; - SCC_ACCESS_INIT(port); - - ch = SCCread_NB(RX_DATA_REG); - if (!tty) { - printk(KERN_WARNING "scc_rx_int with NULL tty!\n"); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - tty_insert_flip_char(tty, ch, 0); - - /* Check if another character is already ready; in that case, the - * spcond_int() function must be used, because this character may have an - * error condition that isn't signalled by the interrupt vector used! - */ - if (SCCread(INT_PENDING_REG) & - (port->channel == CHANNEL_A ? IPR_A_RX : IPR_B_RX)) { - scc_spcond_int (irq, data); - return IRQ_HANDLED; - } - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_spcond_int(int irq, void *data) -{ - struct scc_port *port = data; - struct tty_struct *tty = port->gs.port.tty; - unsigned char stat, ch, err; - int int_pending_mask = port->channel == CHANNEL_A ? - IPR_A_RX : IPR_B_RX; - SCC_ACCESS_INIT(port); - - if (!tty) { - printk(KERN_WARNING "scc_spcond_int with NULL tty!\n"); - SCCwrite(COMMAND_REG, CR_ERROR_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - do { - stat = SCCread(SPCOND_STATUS_REG); - ch = SCCread_NB(RX_DATA_REG); - - if (stat & SCSR_RX_OVERRUN) - err = TTY_OVERRUN; - else if (stat & SCSR_PARITY_ERR) - err = TTY_PARITY; - else if (stat & SCSR_CRC_FRAME_ERR) - err = TTY_FRAME; - else - err = 0; - - tty_insert_flip_char(tty, ch, err); - - /* ++TeSche: *All* errors have to be cleared manually, - * else the condition persists for the next chars - */ - if (err) - SCCwrite(COMMAND_REG, CR_ERROR_RESET); - - } while(SCCread(INT_PENDING_REG) & int_pending_mask); - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - - tty_flip_buffer_push(tty); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_tx_int(int irq, void *data) -{ - struct scc_port *port = data; - SCC_ACCESS_INIT(port); - - if (!port->gs.port.tty) { - printk(KERN_WARNING "scc_tx_int with NULL tty!\n"); - SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; - } - while ((SCCread_NB(STATUS_REG) & SR_TX_BUF_EMPTY)) { - if (port->x_char) { - SCCwrite(TX_DATA_REG, port->x_char); - port->x_char = 0; - } - else if ((port->gs.xmit_cnt <= 0) || - port->gs.port.tty->stopped || - port->gs.port.tty->hw_stopped) - break; - else { - SCCwrite(TX_DATA_REG, port->gs.xmit_buf[port->gs.xmit_tail++]); - port->gs.xmit_tail = port->gs.xmit_tail & (SERIAL_XMIT_SIZE-1); - if (--port->gs.xmit_cnt <= 0) - break; - } - } - if ((port->gs.xmit_cnt <= 0) || port->gs.port.tty->stopped || - port->gs.port.tty->hw_stopped) { - /* disable tx interrupts */ - SCCmod (INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - SCCwrite(COMMAND_REG, CR_TX_PENDING_RESET); /* disable tx_int on next tx underrun? */ - port->gs.port.flags &= ~GS_TX_INTEN; - } - if (port->gs.port.tty && port->gs.xmit_cnt <= port->gs.wakeup_chars) - tty_wakeup(port->gs.port.tty); - - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; -} - - -static irqreturn_t scc_stat_int(int irq, void *data) -{ - struct scc_port *port = data; - unsigned channel = port->channel; - unsigned char last_sr, sr, changed; - SCC_ACCESS_INIT(port); - - last_sr = scc_last_status_reg[channel]; - sr = scc_last_status_reg[channel] = SCCread_NB(STATUS_REG); - changed = last_sr ^ sr; - - if (changed & SR_DCD) { - port->c_dcd = !!(sr & SR_DCD); - if (!(port->gs.port.flags & ASYNC_CHECK_CD)) - ; /* Don't report DCD changes */ - else if (port->c_dcd) { - wake_up_interruptible(&port->gs.port.open_wait); - } - else { - if (port->gs.port.tty) - tty_hangup (port->gs.port.tty); - } - } - SCCwrite(COMMAND_REG, CR_EXTSTAT_RESET); - SCCwrite_NB(COMMAND_REG, CR_HIGHEST_IUS_RESET); - return IRQ_HANDLED; -} - - -/*--------------------------------------------------------------------------- - * generic_serial.c callback funtions - *--------------------------------------------------------------------------*/ - -static void scc_disable_tx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, ~IDR_TX_INT_ENAB, 0); - port->gs.port.flags &= ~GS_TX_INTEN; - local_irq_restore(flags); -} - - -static void scc_enable_tx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, 0xff, IDR_TX_INT_ENAB); - /* restart the transmitter */ - scc_tx_int (0, port); - local_irq_restore(flags); -} - - -static void scc_disable_rx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, - ~(IDR_RX_INT_MASK|IDR_PARERR_AS_SPCOND|IDR_EXTSTAT_INT_ENAB), 0); - local_irq_restore(flags); -} - - -static void scc_enable_rx_interrupts(void *ptr) -{ - struct scc_port *port = ptr; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(INT_AND_DMA_REG, 0xff, - IDR_EXTSTAT_INT_ENAB|IDR_PARERR_AS_SPCOND|IDR_RX_INT_ALL); - local_irq_restore(flags); -} - - -static int scc_carrier_raised(struct tty_port *port) -{ - struct scc_port *sc = container_of(port, struct scc_port, gs.port); - unsigned channel = sc->channel; - - return !!(scc_last_status_reg[channel] & SR_DCD); -} - - -static void scc_shutdown_port(void *ptr) -{ - struct scc_port *port = ptr; - - port->gs.port.flags &= ~ GS_ACTIVE; - if (port->gs.port.tty && (port->gs.port.tty->termios->c_cflag & HUPCL)) { - scc_setsignals (port, 0, 0); - } -} - - -static int scc_set_real_termios (void *ptr) -{ - /* the SCC has char sizes 5,7,6,8 in that order! */ - static int chsize_map[4] = { 0, 2, 1, 3 }; - unsigned cflag, baud, chsize, channel, brgval = 0; - unsigned long flags; - struct scc_port *port = ptr; - SCC_ACCESS_INIT(port); - - if (!port->gs.port.tty || !port->gs.port.tty->termios) return 0; - - channel = port->channel; - - if (channel == CHANNEL_A) - return 0; /* Settings controlled by boot PROM */ - - cflag = port->gs.port.tty->termios->c_cflag; - baud = port->gs.baud; - chsize = (cflag & CSIZE) >> 4; - - if (baud == 0) { - /* speed == 0 -> drop DTR */ - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_DTR, 0); - local_irq_restore(flags); - return 0; - } - else if ((MACH_IS_MVME16x && (baud < 50 || baud > 38400)) || - (MACH_IS_MVME147 && (baud < 50 || baud > 19200)) || - (MACH_IS_BVME6000 &&(baud < 50 || baud > 76800))) { - printk(KERN_NOTICE "SCC: Bad speed requested, %d\n", baud); - return 0; - } - - if (cflag & CLOCAL) - port->gs.port.flags &= ~ASYNC_CHECK_CD; - else - port->gs.port.flags |= ASYNC_CHECK_CD; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - brgval = (M147_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - brgval = (MVME_SCC_PCLK + baud/2) / (16 * 2 * baud) - 2; -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - brgval = (BVME_SCC_RTxC + baud/2) / (16 * 2 * baud) - 2; -#endif - /* Now we have all parameters and can go to set them: */ - local_irq_save(flags); - - /* receiver's character size and auto-enables */ - SCCmod(RX_CTRL_REG, ~(RCR_CHSIZE_MASK|RCR_AUTO_ENAB_MODE), - (chsize_map[chsize] << 6) | - ((cflag & CRTSCTS) ? RCR_AUTO_ENAB_MODE : 0)); - /* parity and stop bits (both, Tx and Rx), clock mode never changes */ - SCCmod (AUX1_CTRL_REG, - ~(A1CR_PARITY_MASK | A1CR_MODE_MASK), - ((cflag & PARENB - ? (cflag & PARODD ? A1CR_PARITY_ODD : A1CR_PARITY_EVEN) - : A1CR_PARITY_NONE) - | (cflag & CSTOPB ? A1CR_MODE_ASYNC_2 : A1CR_MODE_ASYNC_1))); - /* sender's character size, set DTR for valid baud rate */ - SCCmod(TX_CTRL_REG, ~TCR_CHSIZE_MASK, chsize_map[chsize] << 5 | TCR_DTR); - /* clock sources never change */ - /* disable BRG before changing the value */ - SCCmod(DPLL_CTRL_REG, ~DCR_BRG_ENAB, 0); - /* BRG value */ - SCCwrite(TIMER_LOW_REG, brgval & 0xff); - SCCwrite(TIMER_HIGH_REG, (brgval >> 8) & 0xff); - /* BRG enable, and clock source never changes */ - SCCmod(DPLL_CTRL_REG, 0xff, DCR_BRG_ENAB); - - local_irq_restore(flags); - - return 0; -} - - -static int scc_chars_in_buffer (void *ptr) -{ - struct scc_port *port = ptr; - SCC_ACCESS_INIT(port); - - return (SCCread (SPCOND_STATUS_REG) & SCSR_ALL_SENT) ? 0 : 1; -} - - -/* Comment taken from sx.c (2.4.0): - I haven't the foggiest why the decrement use count has to happen - here. The whole linux serial drivers stuff needs to be redesigned. - My guess is that this is a hack to minimize the impact of a bug - elsewhere. Thinking about it some more. (try it sometime) Try - running minicom on a serial port that is driven by a modularized - driver. Have the modem hangup. Then remove the driver module. Then - exit minicom. I expect an "oops". -- REW */ - -static void scc_hungup(void *ptr) -{ - scc_disable_tx_interrupts(ptr); - scc_disable_rx_interrupts(ptr); -} - - -static void scc_close(void *ptr) -{ - scc_disable_tx_interrupts(ptr); - scc_disable_rx_interrupts(ptr); -} - - -/*--------------------------------------------------------------------------- - * Internal support functions - *--------------------------------------------------------------------------*/ - -static void scc_setsignals(struct scc_port *port, int dtr, int rts) -{ - unsigned long flags; - unsigned char t; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - t = SCCread(TX_CTRL_REG); - if (dtr >= 0) t = dtr? (t | TCR_DTR): (t & ~TCR_DTR); - if (rts >= 0) t = rts? (t | TCR_RTS): (t & ~TCR_RTS); - SCCwrite(TX_CTRL_REG, t); - local_irq_restore(flags); -} - - -static void scc_send_xchar(struct tty_struct *tty, char ch) -{ - struct scc_port *port = tty->driver_data; - - port->x_char = ch; - if (ch) - scc_enable_tx_interrupts(port); -} - - -/*--------------------------------------------------------------------------- - * Driver entrypoints referenced from above - *--------------------------------------------------------------------------*/ - -static int scc_open (struct tty_struct * tty, struct file * filp) -{ - int line = tty->index; - int retval; - struct scc_port *port = &scc_ports[line]; - int i, channel = port->channel; - unsigned long flags; - SCC_ACCESS_INIT(port); -#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_MVME147_SCC) - static const struct { - unsigned reg, val; - } mvme_init_tab[] = { - /* Values for MVME162 and MVME147 */ - /* no parity, 1 stop bit, async, 1:16 */ - { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, - /* parity error is special cond, ints disabled, no DMA */ - { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, - /* Rx 8 bits/char, no auto enable, Rx off */ - { RX_CTRL_REG, RCR_CHSIZE_8 }, - /* DTR off, Tx 8 bits/char, RTS off, Tx off */ - { TX_CTRL_REG, TCR_CHSIZE_8 }, - /* special features off */ - { AUX2_CTRL_REG, 0 }, - { CLK_CTRL_REG, CCR_RXCLK_BRG | CCR_TXCLK_BRG }, - { DPLL_CTRL_REG, DCR_BRG_ENAB | DCR_BRG_USE_PCLK }, - /* Start Rx */ - { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, - /* Start Tx */ - { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, - /* Ext/Stat ints: DCD only */ - { INT_CTRL_REG, ICR_ENAB_DCD_INT }, - /* Reset Ext/Stat ints */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - /* ...again */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - }; -#endif -#if defined(CONFIG_BVME6000_SCC) - static const struct { - unsigned reg, val; - } bvme_init_tab[] = { - /* Values for BVME6000 */ - /* no parity, 1 stop bit, async, 1:16 */ - { AUX1_CTRL_REG, A1CR_PARITY_NONE|A1CR_MODE_ASYNC_1|A1CR_CLKMODE_x16 }, - /* parity error is special cond, ints disabled, no DMA */ - { INT_AND_DMA_REG, IDR_PARERR_AS_SPCOND | IDR_RX_INT_DISAB }, - /* Rx 8 bits/char, no auto enable, Rx off */ - { RX_CTRL_REG, RCR_CHSIZE_8 }, - /* DTR off, Tx 8 bits/char, RTS off, Tx off */ - { TX_CTRL_REG, TCR_CHSIZE_8 }, - /* special features off */ - { AUX2_CTRL_REG, 0 }, - { CLK_CTRL_REG, CCR_RTxC_XTAL | CCR_RXCLK_BRG | CCR_TXCLK_BRG }, - { DPLL_CTRL_REG, DCR_BRG_ENAB }, - /* Start Rx */ - { RX_CTRL_REG, RCR_RX_ENAB | RCR_CHSIZE_8 }, - /* Start Tx */ - { TX_CTRL_REG, TCR_TX_ENAB | TCR_RTS | TCR_DTR | TCR_CHSIZE_8 }, - /* Ext/Stat ints: DCD only */ - { INT_CTRL_REG, ICR_ENAB_DCD_INT }, - /* Reset Ext/Stat ints */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - /* ...again */ - { COMMAND_REG, CR_EXTSTAT_RESET }, - }; -#endif - if (!(port->gs.port.flags & ASYNC_INITIALIZED)) { - local_irq_save(flags); -#if defined(CONFIG_MVME147_SCC) || defined(CONFIG_MVME162_SCC) - if (MACH_IS_MVME147 || MACH_IS_MVME16x) { - for (i = 0; i < ARRAY_SIZE(mvme_init_tab); ++i) - SCCwrite(mvme_init_tab[i].reg, mvme_init_tab[i].val); - } -#endif -#if defined(CONFIG_BVME6000_SCC) - if (MACH_IS_BVME6000) { - for (i = 0; i < ARRAY_SIZE(bvme_init_tab); ++i) - SCCwrite(bvme_init_tab[i].reg, bvme_init_tab[i].val); - } -#endif - - /* remember status register for detection of DCD and CTS changes */ - scc_last_status_reg[channel] = SCCread(STATUS_REG); - - port->c_dcd = 0; /* Prevent initial 1->0 interrupt */ - scc_setsignals (port, 1,1); - local_irq_restore(flags); - } - - tty->driver_data = port; - port->gs.port.tty = tty; - port->gs.port.count++; - retval = gs_init_port(&port->gs); - if (retval) { - port->gs.port.count--; - return retval; - } - port->gs.port.flags |= GS_ACTIVE; - retval = gs_block_til_ready(port, filp); - - if (retval) { - port->gs.port.count--; - return retval; - } - - port->c_dcd = tty_port_carrier_raised(&port->gs.port); - - scc_enable_rx_interrupts(port); - - return 0; -} - - -static void scc_throttle (struct tty_struct * tty) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - if (tty->termios->c_cflag & CRTSCTS) { - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_RTS, 0); - local_irq_restore(flags); - } - if (I_IXOFF(tty)) - scc_send_xchar(tty, STOP_CHAR(tty)); -} - - -static void scc_unthrottle (struct tty_struct * tty) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - if (tty->termios->c_cflag & CRTSCTS) { - local_irq_save(flags); - SCCmod(TX_CTRL_REG, 0xff, TCR_RTS); - local_irq_restore(flags); - } - if (I_IXOFF(tty)) - scc_send_xchar(tty, START_CHAR(tty)); -} - - -static int scc_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - return -ENOIOCTLCMD; -} - - -static int scc_break_ctl(struct tty_struct *tty, int break_state) -{ - struct scc_port *port = tty->driver_data; - unsigned long flags; - SCC_ACCESS_INIT(port); - - local_irq_save(flags); - SCCmod(TX_CTRL_REG, ~TCR_SEND_BREAK, - break_state ? TCR_SEND_BREAK : 0); - local_irq_restore(flags); - return 0; -} - - -/*--------------------------------------------------------------------------- - * Serial console stuff... - *--------------------------------------------------------------------------*/ - -#define scc_delay() do { __asm__ __volatile__ (" nop; nop"); } while (0) - -static void scc_ch_write (char ch) -{ - volatile char *p = NULL; - -#ifdef CONFIG_MVME147_SCC - if (MACH_IS_MVME147) - p = (volatile char *)M147_SCC_A_ADDR; -#endif -#ifdef CONFIG_MVME162_SCC - if (MACH_IS_MVME16x) - p = (volatile char *)MVME_SCC_A_ADDR; -#endif -#ifdef CONFIG_BVME6000_SCC - if (MACH_IS_BVME6000) - p = (volatile char *)BVME_SCC_A_ADDR; -#endif - - do { - scc_delay(); - } - while (!(*p & 4)); - scc_delay(); - *p = 8; - scc_delay(); - *p = ch; -} - -/* The console must be locked when we get here. */ - -static void scc_console_write (struct console *co, const char *str, unsigned count) -{ - unsigned long flags; - - local_irq_save(flags); - - while (count--) - { - if (*str == '\n') - scc_ch_write ('\r'); - scc_ch_write (*str++); - } - local_irq_restore(flags); -} - -static struct tty_driver *scc_console_device(struct console *c, int *index) -{ - *index = c->index; - return scc_driver; -} - -static struct console sercons = { - .name = "ttyS", - .write = scc_console_write, - .device = scc_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - - -static int __init vme_scc_console_init(void) -{ - if (vme_brdtype == VME_TYPE_MVME147 || - vme_brdtype == VME_TYPE_MVME162 || - vme_brdtype == VME_TYPE_MVME172 || - vme_brdtype == VME_TYPE_BVME4000 || - vme_brdtype == VME_TYPE_BVME6000) - register_console(&sercons); - return 0; -} -console_initcall(vme_scc_console_init); |