diff options
Diffstat (limited to 'drivers/char/tpm/st33zp24/spi.c')
| -rw-r--r-- | drivers/char/tpm/st33zp24/spi.c | 145 |
1 files changed, 3 insertions, 142 deletions
diff --git a/drivers/char/tpm/st33zp24/spi.c b/drivers/char/tpm/st33zp24/spi.c index 22d184884694..2154059f0235 100644 --- a/drivers/char/tpm/st33zp24/spi.c +++ b/drivers/char/tpm/st33zp24/spi.c @@ -6,13 +6,9 @@ #include <linux/module.h> #include <linux/spi/spi.h> -#include <linux/gpio.h> -#include <linux/gpio/consumer.h> -#include <linux/of_irq.h> -#include <linux/of_gpio.h> +#include <linux/of.h> #include <linux/acpi.h> #include <linux/tpm.h> -#include <linux/platform_data/st33zp24.h> #include "../tpm.h" #include "st33zp24.h" @@ -61,7 +57,6 @@ struct st33zp24_spi_phy { u8 tx_buf[ST33ZP24_SPI_BUFFER_SIZE]; u8 rx_buf[ST33ZP24_SPI_BUFFER_SIZE]; - int io_lpcpd; int latency; }; @@ -218,115 +213,6 @@ static const struct st33zp24_phy_ops spi_phy_ops = { .recv = st33zp24_spi_recv, }; -static const struct acpi_gpio_params lpcpd_gpios = { 1, 0, false }; - -static const struct acpi_gpio_mapping acpi_st33zp24_gpios[] = { - { "lpcpd-gpios", &lpcpd_gpios, 1 }, - {}, -}; - -static int st33zp24_spi_acpi_request_resources(struct spi_device *spi_dev) -{ - struct tpm_chip *chip = spi_get_drvdata(spi_dev); - struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); - struct st33zp24_spi_phy *phy = tpm_dev->phy_id; - struct gpio_desc *gpiod_lpcpd; - struct device *dev = &spi_dev->dev; - int ret; - - ret = devm_acpi_dev_add_driver_gpios(dev, acpi_st33zp24_gpios); - if (ret) - return ret; - - /* Get LPCPD GPIO from ACPI */ - gpiod_lpcpd = devm_gpiod_get(dev, "lpcpd", GPIOD_OUT_HIGH); - if (IS_ERR(gpiod_lpcpd)) { - dev_err(dev, "Failed to retrieve lpcpd-gpios from acpi.\n"); - phy->io_lpcpd = -1; - /* - * lpcpd pin is not specified. This is not an issue as - * power management can be also managed by TPM specific - * commands. So leave with a success status code. - */ - return 0; - } - - phy->io_lpcpd = desc_to_gpio(gpiod_lpcpd); - - return 0; -} - -static int st33zp24_spi_of_request_resources(struct spi_device *spi_dev) -{ - struct tpm_chip *chip = spi_get_drvdata(spi_dev); - struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); - struct st33zp24_spi_phy *phy = tpm_dev->phy_id; - struct device_node *pp; - int gpio; - int ret; - - pp = spi_dev->dev.of_node; - if (!pp) { - dev_err(&spi_dev->dev, "No platform data\n"); - return -ENODEV; - } - - /* Get GPIO from device tree */ - gpio = of_get_named_gpio(pp, "lpcpd-gpios", 0); - if (gpio < 0) { - dev_err(&spi_dev->dev, - "Failed to retrieve lpcpd-gpios from dts.\n"); - phy->io_lpcpd = -1; - /* - * lpcpd pin is not specified. This is not an issue as - * power management can be also managed by TPM specific - * commands. So leave with a success status code. - */ - return 0; - } - /* GPIO request and configuration */ - ret = devm_gpio_request_one(&spi_dev->dev, gpio, - GPIOF_OUT_INIT_HIGH, "TPM IO LPCPD"); - if (ret) { - dev_err(&spi_dev->dev, "Failed to request lpcpd pin\n"); - return -ENODEV; - } - phy->io_lpcpd = gpio; - - return 0; -} - -static int st33zp24_spi_request_resources(struct spi_device *dev) -{ - struct tpm_chip *chip = spi_get_drvdata(dev); - struct st33zp24_dev *tpm_dev = dev_get_drvdata(&chip->dev); - struct st33zp24_spi_phy *phy = tpm_dev->phy_id; - struct st33zp24_platform_data *pdata; - int ret; - - pdata = dev->dev.platform_data; - if (!pdata) { - dev_err(&dev->dev, "No platform data\n"); - return -ENODEV; - } - - /* store for late use */ - phy->io_lpcpd = pdata->io_lpcpd; - - if (gpio_is_valid(pdata->io_lpcpd)) { - ret = devm_gpio_request_one(&dev->dev, - pdata->io_lpcpd, GPIOF_OUT_INIT_HIGH, - "TPM IO_LPCPD"); - if (ret) { - dev_err(&dev->dev, "%s : reset gpio_request failed\n", - __FILE__); - return ret; - } - } - - return 0; -} - /* * st33zp24_spi_probe initialize the TPM device * @param: dev, the spi_device description (TPM SPI description). @@ -335,17 +221,8 @@ static int st33zp24_spi_request_resources(struct spi_device *dev) */ static int st33zp24_spi_probe(struct spi_device *dev) { - int ret; - struct st33zp24_platform_data *pdata; struct st33zp24_spi_phy *phy; - /* Check SPI platform functionnalities */ - if (!dev) { - pr_info("%s: dev is NULL. Device is not accessible.\n", - __func__); - return -ENODEV; - } - phy = devm_kzalloc(&dev->dev, sizeof(struct st33zp24_spi_phy), GFP_KERNEL); if (!phy) @@ -353,27 +230,11 @@ static int st33zp24_spi_probe(struct spi_device *dev) phy->spi_device = dev; - pdata = dev->dev.platform_data; - if (!pdata && dev->dev.of_node) { - ret = st33zp24_spi_of_request_resources(dev); - if (ret) - return ret; - } else if (pdata) { - ret = st33zp24_spi_request_resources(dev); - if (ret) - return ret; - } else if (ACPI_HANDLE(&dev->dev)) { - ret = st33zp24_spi_acpi_request_resources(dev); - if (ret) - return ret; - } - phy->latency = st33zp24_spi_evaluate_latency(phy); if (phy->latency <= 0) return -ENODEV; - return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq, - phy->io_lpcpd); + return st33zp24_probe(phy, &spi_phy_ops, &dev->dev, dev->irq); } /* @@ -411,7 +272,7 @@ static SIMPLE_DEV_PM_OPS(st33zp24_spi_ops, st33zp24_pm_suspend, static struct spi_driver st33zp24_spi_driver = { .driver = { - .name = TPM_ST33_SPI, + .name = "st33zp24-spi", .pm = &st33zp24_spi_ops, .of_match_table = of_match_ptr(of_st33zp24_spi_match), .acpi_match_table = ACPI_PTR(st33zp24_spi_acpi_match), |