summaryrefslogtreecommitdiffstats
path: root/drivers/bus
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bus')
-rw-r--r--drivers/bus/arm-cci.c66
1 files changed, 66 insertions, 0 deletions
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index f1d3f47fc583..ebb2f1efa12c 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -891,6 +891,71 @@ static void pmu_write_counters(struct cci_pmu *cci_pmu, unsigned long *mask)
__pmu_write_counters(cci_pmu, mask);
}
+#ifdef CONFIG_ARM_CCI500_PMU
+
+/*
+ * CCI-500 has advanced power saving policies, which could gate the
+ * clocks to the PMU counters, which makes the writes to them ineffective.
+ * The only way to write to those counters is when the global counters
+ * are enabled and the particular counter is enabled.
+ *
+ * So we do the following :
+ *
+ * 1) Disable all the PMU counters, saving their current state
+ * 2) Enable the global PMU profiling, now that all counters are
+ * disabled.
+ *
+ * For each counter to be programmed, repeat steps 3-7:
+ *
+ * 3) Write an invalid event code to the event control register for the
+ counter, so that the counters are not modified.
+ * 4) Enable the counter control for the counter.
+ * 5) Set the counter value
+ * 6) Disable the counter
+ * 7) Restore the event in the target counter
+ *
+ * 8) Disable the global PMU.
+ * 9) Restore the status of the rest of the counters.
+ *
+ * We choose an event which for CCI-500 is guaranteed not to count.
+ * We use the highest possible event code (0x1f) for the master interface 0.
+ */
+#define CCI500_INVALID_EVENT ((CCI500_PORT_M0 << CCI500_PMU_EVENT_SOURCE_SHIFT) | \
+ (CCI500_PMU_EVENT_CODE_MASK << CCI500_PMU_EVENT_CODE_SHIFT))
+static void cci500_pmu_write_counters(struct cci_pmu *cci_pmu, unsigned long *mask)
+{
+ int i;
+ DECLARE_BITMAP(saved_mask, cci_pmu->num_cntrs);
+
+ bitmap_zero(saved_mask, cci_pmu->num_cntrs);
+ pmu_save_counters(cci_pmu, saved_mask);
+
+ /*
+ * Now that all the counters are disabled, we can safely turn the PMU on,
+ * without syncing the status of the counters
+ */
+ __cci_pmu_enable_nosync(cci_pmu);
+
+ for_each_set_bit(i, mask, cci_pmu->num_cntrs) {
+ struct perf_event *event = cci_pmu->hw_events.events[i];
+
+ if (WARN_ON(!event))
+ continue;
+
+ pmu_set_event(cci_pmu, i, CCI500_INVALID_EVENT);
+ pmu_enable_counter(cci_pmu, i);
+ pmu_write_counter(cci_pmu, local64_read(&event->hw.prev_count), i);
+ pmu_disable_counter(cci_pmu, i);
+ pmu_set_event(cci_pmu, i, event->hw.config_base);
+ }
+
+ __cci_pmu_disable();
+
+ pmu_restore_counters(cci_pmu, saved_mask);
+}
+
+#endif /* CONFIG_ARM_CCI500_PMU */
+
static u64 pmu_event_update(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
@@ -1475,6 +1540,7 @@ static struct cci_pmu_model cci_pmu_models[] = {
},
},
.validate_hw_event = cci500_validate_hw_event,
+ .write_counters = cci500_pmu_write_counters,
},
#endif
};