diff options
Diffstat (limited to 'drivers/bluetooth')
| -rw-r--r-- | drivers/bluetooth/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bluetooth/btuart_cs.c | 675 |
3 files changed, 0 insertions, 692 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 4e7594f3d072..010f5f579e68 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -305,22 +305,6 @@ config BT_HCIBLUECARD Say Y here to compile support for HCI BlueCard devices into the kernel or say M to compile it as module (bluecard_cs). -config BT_HCIBTUART - tristate "HCI UART (PC Card) device driver" - depends on PCMCIA - help - Bluetooth HCI UART (PC Card) driver. - This driver provides support for Bluetooth PCMCIA devices with - an UART interface: - Xircom CreditCard Bluetooth Adapter - Xircom RealPort2 Bluetooth Adapter - Sphinx PICO Card - H-Soft blue+Card - Cyber-blue Compact Flash Card - - Say Y here to compile support for HCI UART devices into the - kernel or say M to compile it as module (btuart_cs). - config BT_HCIVHCI tristate "HCI VHCI (Virtual HCI device) driver" help diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 03cfc1b20c4a..ec16c55eb6e9 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_BT_HCIBFUSB) += bfusb.o obj-$(CONFIG_BT_HCIDTL1) += dtl1_cs.o obj-$(CONFIG_BT_HCIBT3C) += bt3c_cs.o obj-$(CONFIG_BT_HCIBLUECARD) += bluecard_cs.o -obj-$(CONFIG_BT_HCIBTUART) += btuart_cs.o obj-$(CONFIG_BT_HCIBTUSB) += btusb.o obj-$(CONFIG_BT_HCIBTSDIO) += btsdio.o diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c deleted file mode 100644 index 310e9c2e09b6..000000000000 --- a/drivers/bluetooth/btuart_cs.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * - * Driver for Bluetooth PCMCIA cards with HCI UART interface - * - * Copyright (C) 2001-2002 Marcel Holtmann <marcel@holtmann.org> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation; - * - * Software distributed under the License is distributed on an "AS - * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or - * implied. See the License for the specific language governing - * rights and limitations under the License. - * - * The initial developer of the original code is David A. Hinds - * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds - * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. - * - */ - -#include <linux/module.h> - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/types.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/spinlock.h> -#include <linux/moduleparam.h> - -#include <linux/skbuff.h> -#include <linux/string.h> -#include <linux/serial.h> -#include <linux/serial_reg.h> -#include <linux/bitops.h> -#include <linux/io.h> - -#include <pcmcia/cistpl.h> -#include <pcmcia/ciscode.h> -#include <pcmcia/ds.h> -#include <pcmcia/cisreg.h> - -#include <net/bluetooth/bluetooth.h> -#include <net/bluetooth/hci_core.h> - - - -/* ======================== Module parameters ======================== */ - - -MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>"); -MODULE_DESCRIPTION("Bluetooth driver for Bluetooth PCMCIA cards with HCI UART interface"); -MODULE_LICENSE("GPL"); - - - -/* ======================== Local structures ======================== */ - - -struct btuart_info { - struct pcmcia_device *p_dev; - - struct hci_dev *hdev; - - spinlock_t lock; /* For serializing operations */ - - struct sk_buff_head txq; - unsigned long tx_state; - - unsigned long rx_state; - unsigned long rx_count; - struct sk_buff *rx_skb; -}; - - -static int btuart_config(struct pcmcia_device *link); -static void btuart_release(struct pcmcia_device *link); - -static void btuart_detach(struct pcmcia_device *p_dev); - - -/* Maximum baud rate */ -#define SPEED_MAX 115200 - -/* Default baud rate: 57600, 115200, 230400 or 460800 */ -#define DEFAULT_BAUD_RATE 115200 - - -/* Transmit states */ -#define XMIT_SENDING 1 -#define XMIT_WAKEUP 2 -#define XMIT_WAITING 8 - -/* Receiver states */ -#define RECV_WAIT_PACKET_TYPE 0 -#define RECV_WAIT_EVENT_HEADER 1 -#define RECV_WAIT_ACL_HEADER 2 -#define RECV_WAIT_SCO_HEADER 3 -#define RECV_WAIT_DATA 4 - - - -/* ======================== Interrupt handling ======================== */ - - -static int btuart_write(unsigned int iobase, int fifo_size, __u8 *buf, int len) -{ - int actual = 0; - - /* Tx FIFO should be empty */ - if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) - return 0; - - /* Fill FIFO with current frame */ - while ((fifo_size-- > 0) && (actual < len)) { - /* Transmit next byte */ - outb(buf[actual], iobase + UART_TX); - actual++; - } - - return actual; -} - - -static void btuart_write_wakeup(struct btuart_info *info) -{ - if (!info) { - BT_ERR("Unknown device"); - return; - } - - if (test_and_set_bit(XMIT_SENDING, &(info->tx_state))) { - set_bit(XMIT_WAKEUP, &(info->tx_state)); - return; - } - - do { - unsigned int iobase = info->p_dev->resource[0]->start; - register struct sk_buff *skb; - int len; - - clear_bit(XMIT_WAKEUP, &(info->tx_state)); - - if (!pcmcia_dev_present(info->p_dev)) - return; - - skb = skb_dequeue(&(info->txq)); - if (!skb) - break; - - /* Send frame */ - len = btuart_write(iobase, 16, skb->data, skb->len); - set_bit(XMIT_WAKEUP, &(info->tx_state)); - - if (len == skb->len) { - kfree_skb(skb); - } else { - skb_pull(skb, len); - skb_queue_head(&(info->txq), skb); - } - - info->hdev->stat.byte_tx += len; - - } while (test_bit(XMIT_WAKEUP, &(info->tx_state))); - - clear_bit(XMIT_SENDING, &(info->tx_state)); -} - - -static void btuart_receive(struct btuart_info *info) -{ - unsigned int iobase; - int boguscount = 0; - - if (!info) { - BT_ERR("Unknown device"); - return; - } - - iobase = info->p_dev->resource[0]->start; - - do { - info->hdev->stat.byte_rx++; - - /* Allocate packet */ - if (!info->rx_skb) { - info->rx_state = RECV_WAIT_PACKET_TYPE; - info->rx_count = 0; - info->rx_skb = bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC); - if (!info->rx_skb) { - BT_ERR("Can't allocate mem for new packet"); - return; - } - } - - if (info->rx_state == RECV_WAIT_PACKET_TYPE) { - - hci_skb_pkt_type(info->rx_skb) = inb(iobase + UART_RX); - - switch (hci_skb_pkt_type(info->rx_skb)) { - - case HCI_EVENT_PKT: - info->rx_state = RECV_WAIT_EVENT_HEADER; - info->rx_count = HCI_EVENT_HDR_SIZE; - break; - - case HCI_ACLDATA_PKT: - info->rx_state = RECV_WAIT_ACL_HEADER; - info->rx_count = HCI_ACL_HDR_SIZE; - break; - - case HCI_SCODATA_PKT: - info->rx_state = RECV_WAIT_SCO_HEADER; - info->rx_count = HCI_SCO_HDR_SIZE; - break; - - default: - /* Unknown packet */ - BT_ERR("Unknown HCI packet with type 0x%02x received", - hci_skb_pkt_type(info->rx_skb)); - info->hdev->stat.err_rx++; - - kfree_skb(info->rx_skb); - info->rx_skb = NULL; - break; - - } - - } else { - - skb_put_u8(info->rx_skb, inb(iobase + UART_RX)); - info->rx_count--; - - if (info->rx_count == 0) { - - int dlen; - struct hci_event_hdr *eh; - struct hci_acl_hdr *ah; - struct hci_sco_hdr *sh; - - - switch (info->rx_state) { - - case RECV_WAIT_EVENT_HEADER: - eh = hci_event_hdr(info->rx_skb); - info->rx_state = RECV_WAIT_DATA; - info->rx_count = eh->plen; - break; - - case RECV_WAIT_ACL_HEADER: - ah = hci_acl_hdr(info->rx_skb); - dlen = __le16_to_cpu(ah->dlen); - info->rx_state = RECV_WAIT_DATA; - info->rx_count = dlen; - break; - - case RECV_WAIT_SCO_HEADER: - sh = hci_sco_hdr(info->rx_skb); - info->rx_state = RECV_WAIT_DATA; - info->rx_count = sh->dlen; - break; - - case RECV_WAIT_DATA: - hci_recv_frame(info->hdev, info->rx_skb); - info->rx_skb = NULL; - break; - - } - - } - - } - - /* Make sure we don't stay here too long */ - if (boguscount++ > 16) - break; - - } while (inb(iobase + UART_LSR) & UART_LSR_DR); -} - - -static irqreturn_t btuart_interrupt(int irq, void *dev_inst) -{ - struct btuart_info *info = dev_inst; - unsigned int iobase; - int boguscount = 0; - int iir, lsr; - irqreturn_t r = IRQ_NONE; - - if (!info || !info->hdev) - /* our irq handler is shared */ - return IRQ_NONE; - - iobase = info->p_dev->resource[0]->start; - - spin_lock(&(info->lock)); - - iir = inb(iobase + UART_IIR) & UART_IIR_ID; - while (iir) { - r = IRQ_HANDLED; - - /* Clear interrupt */ - lsr = inb(iobase + UART_LSR); - - switch (iir) { - case UART_IIR_RLSI: - BT_ERR("RLSI"); - break; - case UART_IIR_RDI: - /* Receive interrupt */ - btuart_receive(info); - break; - case UART_IIR_THRI: - if (lsr & UART_LSR_THRE) { - /* Transmitter ready for data */ - btuart_write_wakeup(info); - } - break; - default: - BT_ERR("Unhandled IIR=%#x", iir); - break; - } - - /* Make sure we don't stay here too long */ - if (boguscount++ > 100) - break; - - iir = inb(iobase + UART_IIR) & UART_IIR_ID; - - } - - spin_unlock(&(info->lock)); - - return r; -} - - -static void btuart_change_speed(struct btuart_info *info, - unsigned int speed) -{ - unsigned long flags; - unsigned int iobase; - int fcr; /* FIFO control reg */ - int lcr; /* Line control reg */ - int divisor; - - if (!info) { - BT_ERR("Unknown device"); - return; - } - - iobase = info->p_dev->resource[0]->start; - - spin_lock_irqsave(&(info->lock), flags); - - /* Turn off interrupts */ - outb(0, iobase + UART_IER); - - divisor = SPEED_MAX / speed; - - fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; - - /* - * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and - * almost 1,7 ms at 19200 bps. At speeds above that we can just forget - * about this timeout since it will always be fast enough. - */ - - if (speed < 38400) - fcr |= UART_FCR_TRIGGER_1; - else - fcr |= UART_FCR_TRIGGER_14; - - /* Bluetooth cards use 8N1 */ - lcr = UART_LCR_WLEN8; - - outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */ - outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */ - outb(divisor >> 8, iobase + UART_DLM); - outb(lcr, iobase + UART_LCR); /* Set 8N1 */ - outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ - - /* Turn on interrupts */ - outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); - - spin_unlock_irqrestore(&(info->lock), flags); -} - - - -/* ======================== HCI interface ======================== */ - - -static int btuart_hci_flush(struct hci_dev *hdev) -{ - struct btuart_info *info = hci_get_drvdata(hdev); - - /* Drop TX queue */ - skb_queue_purge(&(info->txq)); - - return 0; -} - - -static int btuart_hci_open(struct hci_dev *hdev) -{ - return 0; -} - - -static int btuart_hci_close(struct hci_dev *hdev) -{ - btuart_hci_flush(hdev); - - return 0; -} - - -static int btuart_hci_send_frame(struct hci_dev *hdev, struct sk_buff *skb) -{ - struct btuart_info *info = hci_get_drvdata(hdev); - - switch (hci_skb_pkt_type(skb)) { - case HCI_COMMAND_PKT: - hdev->stat.cmd_tx++; - break; - case HCI_ACLDATA_PKT: - hdev->stat.acl_tx++; - break; - case HCI_SCODATA_PKT: - hdev->stat.sco_tx++; - break; - } - - /* Prepend skb with frame type */ - memcpy(skb_push(skb, 1), &hci_skb_pkt_type(skb), 1); - skb_queue_tail(&(info->txq), skb); - - btuart_write_wakeup(info); - - return 0; -} - - - -/* ======================== Card services HCI interaction ======================== */ - - -static int btuart_open(struct btuart_info *info) -{ - unsigned long flags; - unsigned int iobase = info->p_dev->resource[0]->start; - struct hci_dev *hdev; - - spin_lock_init(&(info->lock)); - - skb_queue_head_init(&(info->txq)); - - info->rx_state = RECV_WAIT_PACKET_TYPE; - info->rx_count = 0; - info->rx_skb = NULL; - - /* Initialize HCI device */ - hdev = hci_alloc_dev(); - if (!hdev) { - BT_ERR("Can't allocate HCI device"); - return -ENOMEM; - } - - info->hdev = hdev; - - hdev->bus = HCI_PCCARD; - hci_set_drvdata(hdev, info); - SET_HCIDEV_DEV(hdev, &info->p_dev->dev); - - hdev->open = btuart_hci_open; - hdev->close = btuart_hci_close; - hdev->flush = btuart_hci_flush; - hdev->send = btuart_hci_send_frame; - - spin_lock_irqsave(&(info->lock), flags); - - /* Reset UART */ - outb(0, iobase + UART_MCR); - - /* Turn off interrupts */ - outb(0, iobase + UART_IER); - - /* Initialize UART */ - outb(UART_LCR_WLEN8, iobase + UART_LCR); /* Reset DLAB */ - outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase + UART_MCR); - - /* Turn on interrupts */ - // outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); - - spin_unlock_irqrestore(&(info->lock), flags); - - btuart_change_speed(info, DEFAULT_BAUD_RATE); - - /* Timeout before it is safe to send the first HCI packet */ - msleep(1000); - - /* Register HCI device */ - if (hci_register_dev(hdev) < 0) { - BT_ERR("Can't register HCI device"); - info->hdev = NULL; - hci_free_dev(hdev); - return -ENODEV; - } - - return 0; -} - - -static int btuart_close(struct btuart_info *info) -{ - unsigned long flags; - unsigned int iobase = info->p_dev->resource[0]->start; - struct hci_dev *hdev = info->hdev; - - if (!hdev) - return -ENODEV; - - btuart_hci_close(hdev); - - spin_lock_irqsave(&(info->lock), flags); - - /* Reset UART */ - outb(0, iobase + UART_MCR); - - /* Turn off interrupts */ - outb(0, iobase + UART_IER); - - spin_unlock_irqrestore(&(info->lock), flags); - - hci_unregister_dev(hdev); - hci_free_dev(hdev); - - return 0; -} - -static int btuart_probe(struct pcmcia_device *link) -{ - struct btuart_info *info; - - /* Create new info device */ - info = devm_kzalloc(&link->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->p_dev = link; - link->priv = info; - - link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | - CONF_AUTO_SET_IO; - - return btuart_config(link); -} - - -static void btuart_detach(struct pcmcia_device *link) -{ - btuart_release(link); -} - -static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data) -{ - int *try = priv_data; - - if (!try) - p_dev->io_lines = 16; - - if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) - return -EINVAL; - - p_dev->resource[0]->end = 8; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - return pcmcia_request_io(p_dev); -} - -static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, - void *priv_data) -{ - static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; - int j; - - if (p_dev->io_lines > 3) - return -ENODEV; - - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->end = 8; - - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; -} - -static int btuart_config(struct pcmcia_device *link) -{ - struct btuart_info *info = link->priv; - int i; - int try; - - /* First pass: look for a config entry that looks normal. - * Two tries: without IO aliases, then with aliases - */ - for (try = 0; try < 2; try++) - if (!pcmcia_loop_config(link, btuart_check_config, &try)) - goto found_port; - - /* Second pass: try to find an entry that isn't picky about - * its base address, then try to grab any standard serial port - * address, and finally try to get any free port. - */ - if (!pcmcia_loop_config(link, btuart_check_config_notpicky, NULL)) - goto found_port; - - BT_ERR("No usable port range found"); - goto failed; - -found_port: - i = pcmcia_request_irq(link, btuart_interrupt); - if (i != 0) - goto failed; - - i = pcmcia_enable_device(link); - if (i != 0) - goto failed; - - if (btuart_open(info) != 0) - goto failed; - - return 0; - -failed: - btuart_release(link); - return -ENODEV; -} - - -static void btuart_release(struct pcmcia_device *link) -{ - struct btuart_info *info = link->priv; - - btuart_close(info); - - pcmcia_disable_device(link); -} - -static const struct pcmcia_device_id btuart_ids[] = { - /* don't use this driver. Use serial_cs + hci_uart instead */ - PCMCIA_DEVICE_NULL -}; -MODULE_DEVICE_TABLE(pcmcia, btuart_ids); - -static struct pcmcia_driver btuart_driver = { - .owner = THIS_MODULE, - .name = "btuart_cs", - .probe = btuart_probe, - .remove = btuart_detach, - .id_table = btuart_ids, -}; -module_pcmcia_driver(btuart_driver); |