diff options
Diffstat (limited to 'drivers/atm')
-rw-r--r-- | drivers/atm/Kconfig | 25 | ||||
-rw-r--r-- | drivers/atm/Makefile | 1 | ||||
-rw-r--r-- | drivers/atm/ambassador.c | 2400 | ||||
-rw-r--r-- | drivers/atm/ambassador.h | 648 |
4 files changed, 0 insertions, 3074 deletions
diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index b9370bbca828..7be08e24955c 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -244,31 +244,6 @@ config ATM_IDT77252_USE_SUNI depends on ATM_IDT77252 default y -config ATM_AMBASSADOR - tristate "Madge Ambassador (Collage PCI 155 Server)" - depends on PCI && VIRT_TO_BUS - select BITREVERSE - help - This is a driver for ATMizer based ATM card produced by Madge - Networks Ltd. Say Y (or M to compile as a module named ambassador) - here if you have one of these cards. - -config ATM_AMBASSADOR_DEBUG - bool "Enable debugging messages" - depends on ATM_AMBASSADOR - help - Somewhat useful debugging messages are available. The choice of - messages is controlled by a bitmap. This may be specified as a - module argument (kernel command line argument as well?), changed - dynamically using an ioctl (not yet) or changed by sending the - string "Dxxxx" to VCI 1023 (where x is a hex digit). See the file - <file:drivers/atm/ambassador.h> for the meanings of the bits in the - mask. - - When active, these messages can have a significant impact on the - speed of the driver, and the size of your syslog files! When - inactive, they will have only a modest impact on performance. - config ATM_HORIZON tristate "Madge Horizon [Ultra] (Collage PCI 25 and Collage PCI 155 Client)" depends on PCI && VIRT_TO_BUS diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile index aa191616a72e..99ecbc280643 100644 --- a/drivers/atm/Makefile +++ b/drivers/atm/Makefile @@ -7,7 +7,6 @@ fore_200e-y := fore200e.o obj-$(CONFIG_ATM_ZATM) += zatm.o uPD98402.o obj-$(CONFIG_ATM_NICSTAR) += nicstar.o -obj-$(CONFIG_ATM_AMBASSADOR) += ambassador.o obj-$(CONFIG_ATM_HORIZON) += horizon.o obj-$(CONFIG_ATM_IA) += iphase.o suni.o obj-$(CONFIG_ATM_FORE200E) += fore_200e.o diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c deleted file mode 100644 index c039b8a4fefe..000000000000 --- a/drivers/atm/ambassador.c +++ /dev/null @@ -1,2400 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - Madge Ambassador ATM Adapter driver. - Copyright (C) 1995-1999 Madge Networks Ltd. - -*/ - -/* * dedicated to the memory of Graham Gordon 1971-1998 * */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/atmdev.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/poison.h> -#include <linux/bitrev.h> -#include <linux/mutex.h> -#include <linux/firmware.h> -#include <linux/ihex.h> -#include <linux/slab.h> - -#include <linux/atomic.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#include "ambassador.h" - -#define maintainer_string "Giuliano Procida at Madge Networks <gprocida@madge.com>" -#define description_string "Madge ATM Ambassador driver" -#define version_string "1.2.4" - -static inline void __init show_version (void) { - printk ("%s version %s\n", description_string, version_string); -} - -/* - - Theory of Operation - - I Hardware, detection, initialisation and shutdown. - - 1. Supported Hardware - - This driver is for the PCI ATMizer-based Ambassador card (except - very early versions). It is not suitable for the similar EISA "TR7" - card. Commercially, both cards are known as Collage Server ATM - adapters. - - The loader supports image transfer to the card, image start and few - other miscellaneous commands. - - Only AAL5 is supported with vpi = 0 and vci in the range 0 to 1023. - - The cards are big-endian. - - 2. Detection - - Standard PCI stuff, the early cards are detected and rejected. - - 3. Initialisation - - The cards are reset and the self-test results are checked. The - microcode image is then transferred and started. This waits for a - pointer to a descriptor containing details of the host-based queues - and buffers and various parameters etc. Once they are processed - normal operations may begin. The BIA is read using a microcode - command. - - 4. Shutdown - - This may be accomplished either by a card reset or via the microcode - shutdown command. Further investigation required. - - 5. Persistent state - - The card reset does not affect PCI configuration (good) or the - contents of several other "shared run-time registers" (bad) which - include doorbell and interrupt control as well as EEPROM and PCI - control. The driver must be careful when modifying these registers - not to touch bits it does not use and to undo any changes at exit. - - II Driver software - - 0. Generalities - - The adapter is quite intelligent (fast) and has a simple interface - (few features). VPI is always zero, 1024 VCIs are supported. There - is limited cell rate support. UBR channels can be capped and ABR - (explicit rate, but not EFCI) is supported. There is no CBR or VBR - support. - - 1. Driver <-> Adapter Communication - - Apart from the basic loader commands, the driver communicates - through three entities: the command queue (CQ), the transmit queue - pair (TXQ) and the receive queue pairs (RXQ). These three entities - are set up by the host and passed to the microcode just after it has - been started. - - All queues are host-based circular queues. They are contiguous and - (due to hardware limitations) have some restrictions as to their - locations in (bus) memory. They are of the "full means the same as - empty so don't do that" variety since the adapter uses pointers - internally. - - The queue pairs work as follows: one queue is for supply to the - adapter, items in it are pending and are owned by the adapter; the - other is the queue for return from the adapter, items in it have - been dealt with by the adapter. The host adds items to the supply - (TX descriptors and free RX buffer descriptors) and removes items - from the return (TX and RX completions). The adapter deals with out - of order completions. - - Interrupts (card to host) and the doorbell (host to card) are used - for signalling. - - 1. CQ - - This is to communicate "open VC", "close VC", "get stats" etc. to - the adapter. At most one command is retired every millisecond by the - card. There is no out of order completion or notification. The - driver needs to check the return code of the command, waiting as - appropriate. - - 2. TXQ - - TX supply items are of variable length (scatter gather support) and - so the queue items are (more or less) pointers to the real thing. - Each TX supply item contains a unique, host-supplied handle (the skb - bus address seems most sensible as this works for Alphas as well, - there is no need to do any endian conversions on the handles). - - TX return items consist of just the handles above. - - 3. RXQ (up to 4 of these with different lengths and buffer sizes) - - RX supply items consist of a unique, host-supplied handle (the skb - bus address again) and a pointer to the buffer data area. - - RX return items consist of the handle above, the VC, length and a - status word. This just screams "oh so easy" doesn't it? - - Note on RX pool sizes: - - Each pool should have enough buffers to handle a back-to-back stream - of minimum sized frames on a single VC. For example: - - frame spacing = 3us (about right) - - delay = IRQ lat + RX handling + RX buffer replenish = 20 (us) (a guess) - - min number of buffers for one VC = 1 + delay/spacing (buffers) - - delay/spacing = latency = (20+2)/3 = 7 (buffers) (rounding up) - - The 20us delay assumes that there is no need to sleep; if we need to - sleep to get buffers we are going to drop frames anyway. - - In fact, each pool should have enough buffers to support the - simultaneous reassembly of a separate frame on each VC and cope with - the case in which frames complete in round robin cell fashion on - each VC. - - Only one frame can complete at each cell arrival, so if "n" VCs are - open, the worst case is to have them all complete frames together - followed by all starting new frames together. - - desired number of buffers = n + delay/spacing - - These are the extreme requirements, however, they are "n+k" for some - "k" so we have only the constant to choose. This is the argument - rx_lats which current defaults to 7. - - Actually, "n ? n+k : 0" is better and this is what is implemented, - subject to the limit given by the pool size. - - 4. Driver locking - - Simple spinlocks are used around the TX and RX queue mechanisms. - Anyone with a faster, working method is welcome to implement it. - - The adapter command queue is protected with a spinlock. We always - wait for commands to complete. - - A more complex form of locking is used around parts of the VC open - and close functions. There are three reasons for a lock: 1. we need - to do atomic rate reservation and release (not used yet), 2. Opening - sometimes involves two adapter commands which must not be separated - by another command on the same VC, 3. the changes to RX pool size - must be atomic. The lock needs to work over context switches, so we - use a semaphore. - - III Hardware Features and Microcode Bugs - - 1. Byte Ordering - - *%^"$&%^$*&^"$(%^$#&^%$(&#%$*(&^#%!"!"!*! - - 2. Memory access - - All structures that are not accessed using DMA must be 4-byte - aligned (not a problem) and must not cross 4MB boundaries. - - There is a DMA memory hole at E0000000-E00000FF (groan). - - TX fragments (DMA read) must not cross 4MB boundaries (would be 16MB - but for a hardware bug). - - RX buffers (DMA write) must not cross 16MB boundaries and must - include spare trailing bytes up to the next 4-byte boundary; they - will be written with rubbish. - - The PLX likes to prefetch; if reading up to 4 u32 past the end of - each TX fragment is not a problem, then TX can be made to go a - little faster by passing a flag at init that disables a prefetch - workaround. We do not pass this flag. (new microcode only) - - Now we: - . Note that alloc_skb rounds up size to a 16byte boundary. - . Ensure all areas do not traverse 4MB boundaries. - . Ensure all areas do not start at a E00000xx bus address. - (I cannot be certain, but this may always hold with Linux) - . Make all failures cause a loud message. - . Discard non-conforming SKBs (causes TX failure or RX fill delay). - . Discard non-conforming TX fragment descriptors (the TX fails). - In the future we could: - . Allow RX areas that traverse 4MB (but not 16MB) boundaries. - . Segment TX areas into some/more fragments, when necessary. - . Relax checks for non-DMA items (ignore hole). - . Give scatter-gather (iovec) requirements using ???. (?) - - 3. VC close is broken (only for new microcode) - - The VC close adapter microcode command fails to do anything if any - frames have been received on the VC but none have been transmitted. - Frames continue to be reassembled and passed (with IRQ) to the - driver. - - IV To Do List - - . Fix bugs! - - . Timer code may be broken. - - . Deal with buggy VC close (somehow) in microcode 12. - - . Handle interrupted and/or non-blocking writes - is this a job for - the protocol layer? - - . Add code to break up TX fragments when they span 4MB boundaries. - - . Add SUNI phy layer (need to know where SUNI lives on card). - - . Implement a tx_alloc fn to (a) satisfy TX alignment etc. and (b) - leave extra headroom space for Ambassador TX descriptors. - - . Understand these elements of struct atm_vcc: recvq (proto?), - sleep, callback, listenq, backlog_quota, reply and user_back. - - . Adjust TX/RX skb allocation to favour IP with LANE/CLIP (configurable). - - . Impose a TX-pending limit (2?) on each VC, help avoid TX q overflow. - - . Decide whether RX buffer recycling is or can be made completely safe; - turn it back on. It looks like Werner is going to axe this. - - . Implement QoS changes on open VCs (involves extracting parts of VC open - and close into separate functions and using them to make changes). - - . Hack on command queue so that someone can issue multiple commands and wait - on the last one (OR only "no-op" or "wait" commands are waited for). - - . Eliminate need for while-schedule around do_command. - -*/ - -static void do_housekeeping (struct timer_list *t); -/********** globals **********/ - -static unsigned short debug = 0; -static unsigned int cmds = 8; -static unsigned int txs = 32; -static unsigned int rxs[NUM_RX_POOLS] = { 64, 64, 64, 64 }; -static unsigned int rxs_bs[NUM_RX_POOLS] = { 4080, 12240, 36720, 65535 }; -static unsigned int rx_lats = 7; -static unsigned char pci_lat = 0; - -static const unsigned long onegigmask = -1 << 30; - -/********** access to adapter **********/ - -static inline void wr_plain (const amb_dev * dev, size_t addr, u32 data) { - PRINTD (DBG_FLOW|DBG_REGS, "wr: %08zx <- %08x", addr, data); -#ifdef AMB_MMIO - dev->membase[addr / sizeof(u32)] = data; -#else - outl (data, dev->iobase + addr); -#endif -} - -static inline u32 rd_plain (const amb_dev * dev, size_t addr) { -#ifdef AMB_MMIO - u32 data = dev->membase[addr / sizeof(u32)]; -#else - u32 data = inl (dev->iobase + addr); -#endif - PRINTD (DBG_FLOW|DBG_REGS, "rd: %08zx -> %08x", addr, data); - return data; -} - -static inline void wr_mem (const amb_dev * dev, size_t addr, u32 data) { - __be32 be = cpu_to_be32 (data); - PRINTD (DBG_FLOW|DBG_REGS, "wr: %08zx <- %08x b[%08x]", addr, data, be); -#ifdef AMB_MMIO - dev->membase[addr / sizeof(u32)] = be; -#else - outl (be, dev->iobase + addr); -#endif -} - -static inline u32 rd_mem (const amb_dev * dev, size_t addr) { -#ifdef AMB_MMIO - __be32 be = dev->membase[addr / sizeof(u32)]; -#else - __be32 be = inl (dev->iobase + addr); -#endif - u32 data = be32_to_cpu (be); - PRINTD (DBG_FLOW|DBG_REGS, "rd: %08zx -> %08x b[%08x]", addr, data, be); - return data; -} - -/********** dump routines **********/ - -static inline void dump_registers (const amb_dev * dev) { -#ifdef DEBUG_AMBASSADOR - if (debug & DBG_REGS) { - size_t i; - PRINTD (DBG_REGS, "reading PLX control: "); - for (i = 0x00; i < 0x30; i += sizeof(u32)) - rd_mem (dev, i); - PRINTD (DBG_REGS, "reading mailboxes: "); - for (i = 0x40; i < 0x60; i += sizeof(u32)) - rd_mem (dev, i); - PRINTD (DBG_REGS, "reading doorb irqev irqen reset:"); - for (i = 0x60; i < 0x70; i += sizeof(u32)) - rd_mem (dev, i); - } -#else - (void) dev; -#endif - return; -} - -static inline void dump_loader_block (volatile loader_block * lb) { -#ifdef DEBUG_AMBASSADOR - unsigned int i; - PRINTDB (DBG_LOAD, "lb @ %p; res: %d, cmd: %d, pay:", - lb, be32_to_cpu (lb->result), be32_to_cpu (lb->command)); - for (i = 0; i < MAX_COMMAND_DATA; ++i) - PRINTDM (DBG_LOAD, " %08x", be32_to_cpu (lb->payload.data[i])); - PRINTDE (DBG_LOAD, ", vld: %08x", be32_to_cpu (lb->valid)); -#else - (void) lb; -#endif - return; -} - -static inline void dump_command (command * cmd) { -#ifdef DEBUG_AMBASSADOR - unsigned int i; - PRINTDB (DBG_CMD, "cmd @ %p, req: %08x, pars:", - cmd, /*be32_to_cpu*/ (cmd->request)); - for (i = 0; i < 3; ++i) - PRINTDM (DBG_CMD, " %08x", /*be32_to_cpu*/ (cmd->args.par[i])); - PRINTDE (DBG_CMD, ""); -#else - (void) cmd; -#endif - return; -} - -static inline void dump_skb (char * prefix, unsigned int vc, struct sk_buff * skb) { -#ifdef DEBUG_AMBASSADOR - unsigned int i; - unsigned char * data = skb->data; - PRINTDB (DBG_DATA, "%s(%u) ", prefix, vc); - for (i=0; i<skb->len && i < 256;i++) - PRINTDM (DBG_DATA, "%02x ", data[i]); - PRINTDE (DBG_DATA,""); -#else - (void) prefix; - (void) vc; - (void) skb; -#endif - return; -} - -/********** check memory areas for use by Ambassador **********/ - -/* see limitations under Hardware Features */ - -static int check_area (void * start, size_t length) { - // assumes length > 0 - const u32 fourmegmask = -1 << 22; - const u32 twofivesixmask = -1 << 8; - const u32 starthole = 0xE0000000; - u32 startaddress = virt_to_bus (start); - u32 lastaddress = startaddress+length-1; - if ((startaddress ^ lastaddress) & fourmegmask || - (startaddress & twofivesixmask) == starthole) { - PRINTK (KERN_ERR, "check_area failure: [%x,%x] - mail maintainer!", - startaddress, lastaddress); - return -1; - } else { - return 0; - } -} - -/********** free an skb (as per ATM device driver documentation) **********/ - -static void amb_kfree_skb (struct sk_buff * skb) { - if (ATM_SKB(skb)->vcc->pop) { - ATM_SKB(skb)->vcc->pop (ATM_SKB(skb)->vcc, skb); - } else { - dev_kfree_skb_any (skb); - } -} - -/********** TX completion **********/ - -static void tx_complete (amb_dev * dev, tx_out * tx) { - tx_simple * tx_descr = bus_to_virt (tx->handle); - struct sk_buff * skb = tx_descr->skb; - - PRINTD (DBG_FLOW|DBG_TX, "tx_complete %p %p", dev, tx); - - // VC layer stats - atomic_inc(&ATM_SKB(skb)->vcc->stats->tx); - - // free the descriptor - kfree (tx_descr); - - // free the skb - amb_kfree_skb (skb); - - dev->stats.tx_ok++; - return; -} - -/********** RX completion **********/ - -static void rx_complete (amb_dev * dev, rx_out * rx) { - struct sk_buff * skb = bus_to_virt (rx->handle); - u16 vc = be16_to_cpu (rx->vc); - // unused: u16 lec_id = be16_to_cpu (rx->lec_id); - u16 status = be16_to_cpu (rx->status); - u16 rx_len = be16_to_cpu (rx->length); - - PRINTD (DBG_FLOW|DBG_RX, "rx_complete %p %p (len=%hu)", dev, rx, rx_len); - - // XXX move this in and add to VC stats ??? - if (!status) { - struct atm_vcc * atm_vcc = dev->rxer[vc]; - dev->stats.rx.ok++; - - if (atm_vcc) { - - if (rx_len <= atm_vcc->qos.rxtp.max_sdu) { - - if (atm_charge (atm_vcc, skb->truesize)) { - - // prepare socket buffer - ATM_SKB(skb)->vcc = atm_vcc; - skb_put (skb, rx_len); - - dump_skb ("<<<", vc, skb); - - // VC layer stats - atomic_inc(&atm_vcc->stats->rx); - __net_timestamp(skb); - // end of our responsibility - atm_vcc->push (atm_vcc, skb); - return; - - } else { - // someone fix this (message), please! - PRINTD (DBG_INFO|DBG_RX, "dropped thanks to atm_charge (vc %hu, truesize %u)", vc, skb->truesize); - // drop stats incremented in atm_charge - } - - } else { - PRINTK (KERN_INFO, "dropped over-size frame"); - // should we count this? - atomic_inc(&atm_vcc->stats->rx_drop); - } - - } else { - PRINTD (DBG_WARN|DBG_RX, "got frame but RX closed for channel %hu", vc); - // this is an adapter bug, only in new version of microcode - } - - } else { - dev->stats.rx.error++; - if (status & CRC_ERR) - dev->stats.rx.badcrc++; - if (status & LEN_ERR) - dev->stats.rx.toolong++; - if (status & ABORT_ERR) - dev->stats.rx.aborted++; - if (status & UNUSED_ERR) - dev->stats.rx.unused++; - } - - dev_kfree_skb_any (skb); - return; -} - -/* - - Note on queue handling. - - Here "give" and "take" refer to queue entries and a queue (pair) - rather than frames to or from the host or adapter. Empty frame - buffers are given to the RX queue pair and returned unused or - containing RX frames. TX frames (well, pointers to TX fragment - lists) are given to the TX queue pair, completions are returned. - -*/ - -/********** command queue **********/ - -// I really don't like this, but it's the best I can do at the moment - -// also, the callers are responsible for byte order as the microcode -// sometimes does 16-bit accesses (yuk yuk yuk) - -static int command_do (amb_dev * dev, command * cmd) { - amb_cq * cq = &dev->cq; - volatile amb_cq_ptrs * ptrs = &cq->ptrs; - command * my_slot; - - PRINTD (DBG_FLOW|DBG_CMD, "command_do %p", dev); - - if (test_bit (dead, &dev->flags)) - return 0; - - spin_lock (&cq->lock); - - // if not full... - if (cq->pending < cq->maximum) { - // remember my slot for later - my_slot = ptrs->in; - PRINTD (DBG_CMD, "command in slot %p", my_slot); - - dump_command (cmd); - - // copy command in - *ptrs->in = *cmd; - cq->pending++; - ptrs->in = NEXTQ (ptrs->in, ptrs->start, ptrs->limit); - - // mail the command - wr_mem (dev, offsetof(amb_mem, mb.adapter.cmd_address), virt_to_bus (ptrs->in)); - - if (cq->pending > cq->high) - cq->high = cq->pending; - spin_unlock (&cq->lock); - - // these comments were in a while-loop before, msleep removes the loop - // go to sleep - // PRINTD (DBG_CMD, "wait: sleeping %lu for command", timeout); - msleep(cq->pending); - - // wait for my slot to be reached (all waiters are here or above, until...) - while (ptrs->out != my_slot) { - PRINTD (DBG_CMD, "wait: command slot (now at %p)", ptrs->out); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - } - - // wait on my slot (... one gets to its slot, and... ) - while (ptrs->out->request != cpu_to_be32 (SRB_COMPLETE)) { - PRINTD (DBG_CMD, "wait: command slot completion"); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - } - - PRINTD (DBG_CMD, "command complete"); - // update queue (... moves the queue along to the next slot) - spin_lock (&cq->lock); - cq->pending--; - // copy command out - *cmd = *ptrs->out; - ptrs->out = NEXTQ (ptrs->out, ptrs->start, ptrs->limit); - spin_unlock (&cq->lock); - - return 0; - } else { - cq->filled++; - spin_unlock (&cq->lock); - return -EAGAIN; - } - -} - -/********** TX queue pair **********/ - -static int tx_give (amb_dev * dev, tx_in * tx) { - amb_txq * txq = &dev->txq; - unsigned long flags; - - PRINTD (DBG_FLOW|DBG_TX, "tx_give %p", dev); - - if (test_bit (dead, &dev->flags)) - return 0; - - spin_lock_irqsave (&txq->lock, flags); - - if (txq->pending < txq->maximum) { - PRINTD (DBG_TX, "TX in slot %p", txq->in.ptr); - - *txq->in.ptr = *tx; - txq->pending++; - txq->in.ptr = NEXTQ (txq->in.ptr, txq->in.start, txq->in.limit); - // hand over the TX and ring the bell - wr_mem (dev, offsetof(amb_mem, mb.adapter.tx_address), virt_to_bus (txq->in.ptr)); - wr_mem (dev, offsetof(amb_mem, doorbell), TX_FRAME); - - if (txq->pending > txq->high) - txq->high = txq->pending; - spin_unlock_irqrestore (&txq->lock, flags); - return 0; - } else { - txq->filled++; - spin_unlock_irqrestore (&txq->lock, flags); - return -EAGAIN; - } -} - -static int tx_take (amb_dev * dev) { - amb_txq * txq = &dev->txq; - unsigned long flags; - - PRINTD (DBG_FLOW|DBG_TX, "tx_take %p", dev); - - spin_lock_irqsave (&txq->lock, flags); - - if (txq->pending && txq->out.ptr->handle) { - // deal with TX completion - tx_complete (dev, txq->out.ptr); - // mark unused again - txq->out.ptr->handle = 0; - // remove item - txq->pending--; - txq->out.ptr = NEXTQ (txq->out.ptr, txq->out.start, txq->out.limit); - - spin_unlock_irqrestore (&txq->lock, flags); - return 0; - } else { - - spin_unlock_irqrestore (&txq->lock, flags); - return -1; - } -} - -/********** RX queue pairs **********/ - -static int rx_give (amb_dev * dev, rx_in * rx, unsigned char pool) { - amb_rxq * rxq = &dev->rxq[pool]; - unsigned long flags; - - PRINTD (DBG_FLOW|DBG_RX, "rx_give %p[%hu]", dev, pool); - - spin_lock_irqsave (&rxq->lock, flags); - - if (rxq->pending < rxq->maximum) { - PRINTD (DBG_RX, "RX in slot %p", rxq->in.ptr); - - *rxq->in.ptr = *rx; - rxq->pending++; - rxq->in.ptr = NEXTQ (rxq->in.ptr, rxq->in.start, rxq->in.limit); - // hand over the RX buffer - wr_mem (dev, offsetof(amb_mem, mb.adapter.rx_address[pool]), virt_to_bus (rxq->in.ptr)); - - spin_unlock_irqrestore (&rxq->lock, flags); - return 0; - } else { - spin_unlock_irqrestore (&rxq->lock, flags); - return -1; - } -} - -static int rx_take (amb_dev * dev, unsigned char pool) { - amb_rxq * rxq = &dev->rxq[pool]; - unsigned long flags; - - PRINTD (DBG_FLOW|DBG_RX, "rx_take %p[%hu]", dev, pool); - - spin_lock_irqsave (&rxq->lock, flags); - - if (rxq->pending && (rxq->out.ptr->status || rxq->out.ptr->length)) { - // deal with RX completion - rx_complete (dev, rxq->out.ptr); - // mark unused again - rxq->out.ptr->status = 0; - rxq->out.ptr->length = 0; - // remove item - rxq->pending--; - rxq->out.ptr = NEXTQ (rxq->out.ptr, rxq->out.start, rxq->out.limit); - - if (rxq->pending < rxq->low) - rxq->low = rxq->pending; - spin_unlock_irqrestore (&rxq->lock, flags); - return 0; - } else { - if (!rxq->pending && rxq->buffers_wanted) - rxq->emptied++; - spin_unlock_irqrestore (&rxq->lock, flags); - return -1; - } -} - -/********** RX Pool handling **********/ - -/* pre: buffers_wanted = 0, post: pending = 0 */ -static void drain_rx_pool (amb_dev * dev, unsigned char pool) { - amb_rxq * rxq = &dev->rxq[pool]; - - PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pool %p %hu", dev, pool); - - if (test_bit (dead, &dev->flags)) - return; - - /* we are not quite like the fill pool routines as we cannot just - remove one buffer, we have to remove all of them, but we might as - well pretend... */ - if (rxq->pending > rxq->buffers_wanted) { - command cmd; - cmd.request = cpu_to_be32 (SRB_FLUSH_BUFFER_Q); - cmd.args.flush.flags = cpu_to_be32 (pool << SRB_POOL_SHIFT); - while (command_do (dev, &cmd)) - schedule(); - /* the pool may also be emptied via the interrupt handler */ - while (rxq->pending > rxq->buffers_wanted) - if (rx_take (dev, pool)) - schedule(); - } - - return; -} - -static void drain_rx_pools (amb_dev * dev) { - unsigned char pool; - - PRINTD (DBG_FLOW|DBG_POOL, "drain_rx_pools %p", dev); - - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - drain_rx_pool (dev, pool); -} - -static void fill_rx_pool (amb_dev * dev, unsigned char pool, - gfp_t priority) -{ - rx_in rx; - amb_rxq * rxq; - - PRINTD (DBG_FLOW|DBG_POOL, "fill_rx_pool %p %hu %x", dev, pool, priority); - - if (test_bit (dead, &dev->flags)) - return; - - rxq = &dev->rxq[pool]; - while (rxq->pending < rxq->maximum && rxq->pending < rxq->buffers_wanted) { - - struct sk_buff * skb = alloc_skb (rxq->buffer_size, priority); - if (!skb) { - PRINTD (DBG_SKB|DBG_POOL, "failed to allocate skb for RX pool %hu", pool); - return; - } - if (check_area (skb->data, skb->truesize)) { - dev_kfree_skb_any (skb); - return; - } - // cast needed as there is no %? for pointer differences - PRINTD (DBG_SKB, "allocated skb at %p, head %p, area %li", - skb, skb->head, (long) skb_end_offset(skb)); - rx.handle = virt_to_bus (skb); - rx.host_address = cpu_to_be32 (virt_to_bus (skb->data)); - if (rx_give (dev, &rx, pool)) - dev_kfree_skb_any (skb); - - } - - return; -} - -// top up all RX pools -static void fill_rx_pools (amb_dev * dev) { - unsigned char pool; - - PRINTD (DBG_FLOW|DBG_POOL, "fill_rx_pools %p", dev); - - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - fill_rx_pool (dev, pool, GFP_ATOMIC); - - return; -} - -/********** enable host interrupts **********/ - -static void interrupts_on (amb_dev * dev) { - wr_plain (dev, offsetof(amb_mem, interrupt_control), - rd_plain (dev, offsetof(amb_mem, interrupt_control)) - | AMB_INTERRUPT_BITS); -} - -/********** disable host interrupts **********/ - -static void interrupts_off (amb_dev * dev) { - wr_plain (dev, offsetof(amb_mem, interrupt_control), - rd_plain (dev, offsetof(amb_mem, interrupt_control)) - &~ AMB_INTERRUPT_BITS); -} - -/********** interrupt handling **********/ - -static irqreturn_t interrupt_handler(int irq, void *dev_id) { - amb_dev * dev = dev_id; - - PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler: %p", dev_id); - - { - u32 interrupt = rd_plain (dev, offsetof(amb_mem, interrupt)); - - // for us or someone else sharing the same interrupt - if (!interrupt) { - PRINTD (DBG_IRQ, "irq not for me: %d", irq); - return IRQ_NONE; - } - - // definitely for us - PRINTD (DBG_IRQ, "FYI: interrupt was %08x", interrupt); - wr_plain (dev, offsetof(amb_mem, interrupt), -1); - } - - { - unsigned int irq_work = 0; - unsigned char pool; - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - while (!rx_take (dev, pool)) - ++irq_work; - while (!tx_take (dev)) - ++irq_work; - - if (irq_work) { - fill_rx_pools (dev); - - PRINTD (DBG_IRQ, "work done: %u", irq_work); - } else { - PRINTD (DBG_IRQ|DBG_WARN, "no work done"); - } - } - - PRINTD (DBG_IRQ|DBG_FLOW, "interrupt_handler done: %p", dev_id); - return IRQ_HANDLED; -} - -/********** make rate (not quite as much fun as Horizon) **********/ - -static int make_rate (unsigned int rate, rounding r, - u16 * bits, unsigned int * actual) { - unsigned char exp = -1; // hush gcc - unsigned int man = -1; // hush gcc - - PRINTD (DBG_FLOW|DBG_QOS, "make_rate %u", rate); - - // rates in cells per second, ITU format (nasty 16-bit floating-point) - // given 5-bit e and 9-bit m: - // rate = EITHER (1+m/2^9)*2^e OR 0 - // bits = EITHER 1<<14 | e<<9 | m OR 0 - // (bit 15 is "reserved", bit 14 "non-zero") - // smallest rate is 0 (special representation) - // largest rate is (1+511/512)*2^31 = 4290772992 (< 2^32-1) - // smallest non-zero rate is (1+0/512)*2^0 = 1 (> 0) - // simple algorithm: - // find position of top bit, this gives e - // remove top bit and shift (rounding if feeling clever) by 9-e - - // ucode bug: please don't set bit 14! so 0 rate not representable - - if (rate > 0xffc00000U) { - // larger than largest representable rate - - if (r == round_up) { - return -EINVAL; - } else { - exp = 31; - man = 511; - } - - } else if (rate) { - // representable rate - - exp = 31; - man = rate; - - // invariant: rate = man*2^(exp-31) - while (!(man & (1<<31))) { - exp = exp - 1; - man = man<<1; - } - - // man has top bit set - // rate = (2^31+(man-2^31))*2^(exp-31) - // rate = (1+(man-2^31)/2^31)*2^exp - man = man<<1; - man &= 0xffffffffU; // a nop on 32-bit systems - // rate = (1+man/2^32)*2^exp - - // exp is in the range 0 to 31, man is in the range 0 to 2^32-1 - // time to lose significance... we want m in the range 0 to 2^9-1 - // rounding presents a minor problem... we first decide which way - // we are rounding (based on given rounding direction and possibly - // the bits of the mantissa that are to be discarded). - - switch (r) { - case round_down: { - // just truncate - man = man>>(32-9); - break; - } - case round_up: { - // check all bits that we are discarding - if (man & (~0U>>9)) { - man = (man>>(32-9)) + 1; - if (man == (1<<9)) { - // no need to check for round up outside of range - man = 0; - exp += 1; - } - } else { - man = (man>>(32-9)); - } - break; - } - case round_nearest: { - // check msb that we are discarding - if (man & (1<<(32-9-1))) { - man = (man>>(32-9)) + 1; - if (man == (1<<9)) { - // no need to check for round up outside of range - man = 0; - exp += 1; - } - } else { - man = (man>>(32-9)); - } - break; - } - } - - } else { - // zero rate - not representable - - if (r == round_down) { - return -EINVAL; - } else { - exp = 0; - man = 0; - } - - } - - PRINTD (DBG_QOS, "rate: man=%u, exp=%hu", man, exp); - - if (bits) - *bits = /* (1<<14) | */ (exp<<9) | man; - - if (actual) - *actual = (exp >= 9) - ? (1 << exp) + (man << (exp-9)) - : (1 << exp) + ((man + (1<<(9-exp-1))) >> (9-exp)); - - return 0; -} - -/********** Linux ATM Operations **********/ - -// some are not yet implemented while others do not make sense for -// this device - -/********** Open a VC **********/ - -static int amb_open (struct atm_vcc * atm_vcc) -{ - int error; - - struct atm_qos * qos; - struct atm_trafprm * txtp; - struct atm_trafprm * rxtp; - u16 tx_rate_bits = -1; // hush gcc - u16 tx_vc_bits = -1; // hush gcc - u16 tx_frame_bits = -1; // hush gcc - - amb_dev * dev = AMB_DEV(atm_vcc->dev); - amb_vcc * vcc; - unsigned char pool = -1; // hush gcc - short vpi = atm_vcc->vpi; - int vci = atm_vcc->vci; - - PRINTD (DBG_FLOW|DBG_VCC, "amb_open %x %x", vpi, vci); - -#ifdef ATM_VPI_UNSPEC - // UNSPEC is deprecated, remove this code eventually - if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC) { - PRINTK (KERN_WARNING, "rejecting open with unspecified VPI/VCI (deprecated)"); - return -EINVAL; - } -#endif - - if (!(0 <= vpi && vpi < (1<<NUM_VPI_BITS) && - 0 <= vci && vci < (1<<NUM_VCI_BITS))) { - PRINTD (DBG_WARN|DBG_VCC, "VPI/VCI out of range: %hd/%d", vpi, vci); - return -EINVAL; - } - - qos = &atm_vcc->qos; - - if (qos->aal != ATM_AAL5) { - PRINTD (DBG_QOS, "AAL not supported"); - return -EINVAL; - } - - // traffic parameters - - PRINTD (DBG_QOS, "TX:"); - txtp = &qos->txtp; - if (txtp->traffic_class != ATM_NONE) { - switch (txtp->traffic_class) { - case ATM_UBR: { - // we take "the PCR" as a rate-cap - int pcr = atm_pcr_goal (txtp); - if (!pcr) { - // no rate cap - tx_rate_bits = 0; - tx_vc_bits = TX_UBR; - tx_frame_bits = TX_FRAME_NOTCAP; - } else { - rounding r; - if (pcr < 0) { - r = round_down; - pcr = -pcr; - } else { - r = round_up; - } - error = make_rate (pcr, r, &tx_rate_bits, NULL); - if (error) - return error; - tx_vc_bits = TX_UBR_CAPPED; - tx_frame_bits = TX_FRAME_CAPPED; - } - break; - } -#if 0 - case ATM_ABR: { - pcr = atm_pcr_goal (txtp); - PRINTD (DBG_QOS, "pcr goal = %d", pcr); - break; - } -#endif - default: { - // PRINTD (DBG_QOS, "request for non-UBR/ABR denied"); - PRINTD (DBG_QOS, "request for non-UBR denied"); - return -EINVAL; - } - } - PRINTD (DBG_QOS, "tx_rate_bits=%hx, tx_vc_bits=%hx", - tx_rate_bits, tx_vc_bits); - } - - PRINTD (DBG_QOS, "RX:"); - rxtp = &qos->rxtp; - if (rxtp->traffic_class == ATM_NONE) { - // do nothing - } else { - // choose an RX pool (arranged in increasing size) - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - if ((unsigned int) rxtp->max_sdu <= dev->rxq[pool].buffer_size) { - PRINTD (DBG_VCC|DBG_QOS|DBG_POOL, "chose pool %hu (max_sdu %u <= %u)", - pool, rxtp->max_sdu, dev->rxq[pool].buffer_size); - break; - } - if (pool == NUM_RX_POOLS) { - PRINTD (DBG_WARN|DBG_VCC|DBG_QOS|DBG_POOL, - "no pool suitable for VC (RX max_sdu %d is too large)", - rxtp->max_sdu); - return -EINVAL; - } - - switch (rxtp->traffic_class) { - case ATM_UBR: { - break; - } -#if 0 - case ATM_ABR: { - pcr = atm_pcr_goal (rxtp); - PRINTD (DBG_QOS, "pcr goal = %d", pcr); - break; - } -#endif - default: { - // PRINTD (DBG_QOS, "request for non-UBR/ABR denied"); - PRINTD (DBG_QOS, "request for non-UBR denied"); - return -EINVAL; - } - } - } - - // get space for our vcc stuff - vcc = kmalloc (sizeof(amb_vcc), GFP_KERNEL); - if (!vcc) { - PRINTK (KERN_ERR, "out of memory!"); - return -ENOMEM; - } - atm_vcc->dev_data = (void *) vcc; - - // no failures beyond this point - - // we are not really "immediately before allocating the connection - // identifier in hardware", but it will just have to do! - set_bit(ATM_VF_ADDR,&atm_vcc->flags); - - if (txtp->traffic_class != ATM_NONE) { - command cmd; - - vcc->tx_frame_bits = tx_frame_bits; - - mutex_lock(&dev->vcc_sf); - if (dev->rxer[vci]) { - // RXer on the channel already, just modify rate... - cmd.request = cpu_to_be32 (SRB_MODIFY_VC_RATE); - cmd.args.modify_rate.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.modify_rate.rate = cpu_to_be32 (tx_rate_bits << SRB_RATE_SHIFT); - while (command_do (dev, &cmd)) - schedule(); - // ... and TX flags, preserving the RX pool - cmd.request = cpu_to_be32 (SRB_MODIFY_VC_FLAGS); - cmd.args.modify_flags.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.modify_flags.flags = cpu_to_be32 - ( (AMB_VCC(dev->rxer[vci])->rx_info.pool << SRB_POOL_SHIFT) - | (tx_vc_bits << SRB_FLAGS_SHIFT) ); - while (command_do (dev, &cmd)) - schedule(); - } else { - // no RXer on the channel, just open (with pool zero) - cmd.request = cpu_to_be32 (SRB_OPEN_VC); - cmd.args.open.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.open.flags = cpu_to_be32 (tx_vc_bits << SRB_FLAGS_SHIFT); - cmd.args.open.rate = cpu_to_be32 (tx_rate_bits << SRB_RATE_SHIFT); - while (command_do (dev, &cmd)) - schedule(); - } - dev->txer[vci].tx_present = 1; - mutex_unlock(&dev->vcc_sf); - } - - if (rxtp->traffic_class != ATM_NONE) { - command cmd; - - vcc->rx_info.pool = pool; - - mutex_lock(&dev->vcc_sf); - /* grow RX buffer pool */ - if (!dev->rxq[pool].buffers_wanted) - dev->rxq[pool].buffers_wanted = rx_lats; - dev->rxq[pool].buffers_wanted += 1; - fill_rx_pool (dev, pool, GFP_KERNEL); - - if (dev->txer[vci].tx_present) { - // TXer on the channel already - // switch (from pool zero) to this pool, preserving the TX bits - cmd.request = cpu_to_be32 (SRB_MODIFY_VC_FLAGS); - cmd.args.modify_flags.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.modify_flags.flags = cpu_to_be32 - ( (pool << SRB_POOL_SHIFT) - | (dev->txer[vci].tx_vc_bits << SRB_FLAGS_SHIFT) ); - } else { - // no TXer on the channel, open the VC (with no rate info) - cmd.request = cpu_to_be32 (SRB_OPEN_VC); - cmd.args.open.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.open.flags = cpu_to_be32 (pool << SRB_POOL_SHIFT); - cmd.args.open.rate = cpu_to_be32 (0); - } - while (command_do (dev, &cmd)) - schedule(); - // this link allows RX frames through - dev->rxer[vci] = atm_vcc; - mutex_unlock(&dev->vcc_sf); - } - - // indicate readiness - set_bit(ATM_VF_READY,&atm_vcc->flags); - - return 0; -} - -/********** Close a VC **********/ - -static void amb_close (struct atm_vcc * atm_vcc) { - amb_dev * dev = AMB_DEV (atm_vcc->dev); - amb_vcc * vcc = AMB_VCC (atm_vcc); - u16 vci = atm_vcc->vci; - - PRINTD (DBG_VCC|DBG_FLOW, "amb_close"); - - // indicate unreadiness - clear_bit(ATM_VF_READY,&atm_vcc->flags); - - // disable TXing - if (atm_vcc->qos.txtp.traffic_class != ATM_NONE) { - command cmd; - - mutex_lock(&dev->vcc_sf); - if (dev->rxer[vci]) { - // RXer still on the channel, just modify rate... XXX not really needed - cmd.request = cpu_to_be32 (SRB_MODIFY_VC_RATE); - cmd.args.modify_rate.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.modify_rate.rate = cpu_to_be32 (0); - // ... and clear TX rate flags (XXX to stop RM cell output?), preserving RX pool - } else { - // no RXer on the channel, close channel - cmd.request = cpu_to_be32 (SRB_CLOSE_VC); - cmd.args.close.vc = cpu_to_be32 (vci); // vpi 0 - } - dev->txer[vci].tx_present = 0; - while (command_do (dev, &cmd)) - schedule(); - mutex_unlock(&dev->vcc_sf); - } - - // disable RXing - if (atm_vcc->qos.rxtp.traffic_class != ATM_NONE) { - command cmd; - - // this is (the?) one reason why we need the amb_vcc struct - unsigned char pool = vcc->rx_info.pool; - - mutex_lock(&dev->vcc_sf); - if (dev->txer[vci].tx_present) { - // TXer still on the channel, just go to pool zero XXX not really needed - cmd.request = cpu_to_be32 (SRB_MODIFY_VC_FLAGS); - cmd.args.modify_flags.vc = cpu_to_be32 (vci); // vpi 0 - cmd.args.modify_flags.flags = cpu_to_be32 - (dev->txer[vci].tx_vc_bits << SRB_FLAGS_SHIFT); - } else { - // no TXer on the channel, close the VC - cmd.request = cpu_to_be32 (SRB_CLOSE_VC); - cmd.args.close.vc = cpu_to_be32 (vci); // vpi 0 - } - // forget the rxer - no more skbs will be pushed - if (atm_vcc != dev->rxer[vci]) - PRINTK (KERN_ERR, "%s vcc=%p rxer[vci]=%p", - "arghhh! we're going to die!", - vcc, dev->rxer[vci]); - dev->rxer[vci] = NULL; - while (command_do (dev, &cmd)) - schedule(); - - /* shrink RX buffer pool */ - dev->rxq[pool].buffers_wanted -= 1; - if (dev->rxq[pool].buffers_wanted == rx_lats) { - dev->rxq[pool].buffers_wanted = 0; - drain_rx_pool (dev, pool); - } - mutex_unlock(&dev->vcc_sf); - } - - // free our structure - kfree (vcc); - - // say the VPI/VCI is free again - clear_bit(ATM_VF_ADDR,&atm_vcc->flags); - - return; -} - -/********** Send **********/ - -static int amb_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) { - amb_dev * dev = AMB_DEV(atm_vcc->dev); - amb_vcc * vcc = AMB_VCC(atm_vcc); - u16 vc = atm_vcc->vci; - unsigned int tx_len = skb->len; - unsigned char * tx_data = skb->data; - tx_simple * tx_descr; - tx_in tx; - - if (test_bit (dead, &dev->flags)) - return -EIO; - - PRINTD (DBG_FLOW|DBG_TX, "amb_send vc %x data %p len %u", - vc, tx_data, tx_len); - - dump_skb (">>>", vc, skb); - - if (!dev->txer[vc].tx_present) { - PRINTK (KERN_ERR, "attempt to send on RX-only VC %x", vc); - return -EBADFD; - } - - // this is a driver private field so we have to set it ourselves, - // despite the fact that we are _required_ to use it to check for a - // pop function - ATM_SKB(skb)->vcc = atm_vcc; - - if (skb->len > (size_t) atm_vcc->qos.txtp.max_sdu) { - PRINTK (KERN_ERR, "sk_buff length greater than agreed max_sdu, dropping..."); - return -EIO; - } - - if (check_area (skb->data, skb->len)) { - atomic_inc(&atm_vcc->stats->tx_err); - return -ENOMEM; // ? - } - - // allocate memory for fragments - tx_descr = kmalloc (sizeof(tx_simple), GFP_KERNEL); - if (!tx_descr) { - PRINTK (KERN_ERR, "could not allocate TX descriptor"); - return -ENOMEM; - } - if (check_area (tx_descr, sizeof(tx_simple))) { - kfree (tx_descr); - return -ENOMEM; - } - PRINTD (DBG_TX, "fragment list allocated at %p", tx_descr); - - tx_descr->skb = skb; - - tx_descr->tx_frag.bytes = cpu_to_be32 (tx_len); - tx_descr->tx_frag.address = cpu_to_be32 (virt_to_bus (tx_data)); - - tx_descr->tx_frag_end.handle = virt_to_bus (tx_descr); - tx_descr->tx_frag_end.vc = 0; - tx_descr->tx_frag_end.next_descriptor_length = 0; - tx_descr->tx_frag_end.next_descriptor = 0; -#ifdef AMB_NEW_MICROCODE - tx_descr->tx_frag_end.cpcs_uu = 0; - tx_descr->tx_frag_end.cpi = 0; - tx_descr->tx_frag_end.pad = 0; -#endif - - tx.vc = cpu_to_be16 (vcc->tx_frame_bits | vc); - tx.tx_descr_length = cpu_to_be16 (sizeof(tx_frag)+sizeof(tx_frag_end)); - tx.tx_descr_addr = cpu_to_be32 (virt_to_bus (&tx_descr->tx_frag)); - - while (tx_give (dev, &tx)) - schedule(); - return 0; -} - -/********** Change QoS on a VC **********/ - -// int amb_change_qos (struct atm_vcc * atm_vcc, struct atm_qos * qos, int flags); - -/********** Free RX Socket Buffer **********/ - -#if 0 -static void amb_free_rx_skb (struct atm_vcc * atm_vcc, struct sk_buff * skb) { - amb_dev * dev = AMB_DEV (atm_vcc->dev); - amb_vcc * vcc = AMB_VCC (atm_vcc); - unsigned char pool = vcc->rx_info.pool; - rx_in rx; - - // This may be unsafe for various reasons that I cannot really guess - // at. However, I note that the ATM layer calls kfree_skb rather - // than dev_kfree_skb at this point so we are least covered as far - // as buffer locking goes. There may be bugs if pcap clones RX skbs. - - PRINTD (DBG_FLOW|DBG_SKB, "amb_rx_free skb %p (atm_vcc %p, vcc %p)", - skb, atm_vcc, vcc); - - rx.handle = virt_to_bus (skb); - rx.host_address = cpu_to_be32 (virt_to_bus (skb->data)); - - skb->data = skb->head; - skb_reset_tail_pointer(skb); - skb->len = 0; - - if (!rx_give (dev, &rx, pool)) { - // success - PRINTD (DBG_SKB|DBG_POOL, "recycled skb for pool %hu", pool); - return; - } - - // just do what the ATM layer would have done - dev_kfree_skb_any (skb); - - return; -} -#endif - -/********** Proc File Output **********/ - -static int amb_proc_read (struct atm_dev * atm_dev, loff_t * pos, char * page) { - amb_dev * dev = AMB_DEV (atm_dev); - int left = *pos; - unsigned char pool; - - PRINTD (DBG_FLOW, "amb_proc_read"); - - /* more diagnostics here? */ - - if (!left--) { - amb_stats * s = &dev->stats; - return sprintf (page, - "frames: TX OK %lu, RX OK %lu, RX bad %lu " - "(CRC %lu, long %lu, aborted %lu, unused %lu).\n", - s->tx_ok, s->rx.ok, s->rx.error, - s->rx.badcrc, s->rx.toolong, - s->rx.aborted, s->rx.unused); - } - - if (!left--) { - amb_cq * c = &dev->cq; - return sprintf (page, "cmd queue [cur/hi/max]: %u/%u/%u. ", - c->pending, c->high, c->maximum); - } - - if (!left--) { - amb_txq * t = &dev->txq; - return sprintf (page, "TX queue [cur/max high full]: %u/%u %u %u.\n", - t->pending, t->maximum, t->high, t->filled); - } - - if (!left--) { - unsigned int count = sprintf (page, "RX queues [cur/max/req low empty]:"); - for (pool = 0; pool < NUM_RX_POOLS; ++pool) { - amb_rxq * r = &dev->rxq[pool]; - count += sprintf (page+count, " %u/%u/%u %u %u", - r->pending, r->maximum, r->buffers_wanted, r->low, r->emptied); - } - count += sprintf (page+count, ".\n"); - return count; - } - - if (!left--) { - unsigned int count = sprintf (page, "RX buffer sizes:"); - for (pool = 0; pool < NUM_RX_POOLS; ++pool) { - amb_rxq * r = &dev->rxq[pool]; - count += sprintf (page+count, " %u", r->buffer_size); - } - count += sprintf (page+count, ".\n"); - return count; - } - -#if 0 - if (!left--) { - // suni block etc? - } -#endif - - return 0; -} - -/********** Operation Structure **********/ - -static const struct atmdev_ops amb_ops = { - .open = amb_open, - .close = amb_close, - .send = amb_send, - .proc_read = amb_proc_read, - .owner = THIS_MODULE, -}; - -/********** housekeeping **********/ -static void do_housekeeping (struct timer_list *t) { - amb_dev * dev = from_timer(dev, t, housekeeping); - - // could collect device-specific (not driver/atm-linux) stats here - - // last resort refill once every ten seconds - fill_rx_pools (dev); - mod_timer(&dev->housekeeping, jiffies + 10*HZ); - - return; -} - -/********** creation of communication queues **********/ - -static int create_queues(amb_dev *dev, unsigned int cmds, unsigned int txs, - unsigned int *rxs, unsigned int *rx_buffer_sizes) -{ - unsigned char pool; - size_t total = 0; - void * memory; - void * limit; - - PRINTD (DBG_FLOW, "create_queues %p", dev); - - total += cmds * sizeof(command); - - total += txs * (sizeof(tx_in) + sizeof(tx_out)); - - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - total += rxs[pool] * (sizeof(rx_in) + sizeof(rx_out)); - - memory = kmalloc (total, GFP_KERNEL); - if (!memory) { - PRINTK (KERN_ERR, "could not allocate queues"); - return -ENOMEM; - } - if (check_area (memory, total)) { - PRINTK (KERN_ERR, "queues allocated in nasty area"); - kfree (memory); - return -ENOMEM; - } - - limit = memory + total; - PRINTD (DBG_INIT, "queues from %p to %p", memory, limit); - - PRINTD (DBG_CMD, "command queue at %p", memory); - - { - command * cmd = memory; - amb_cq * cq = &dev->cq; - - cq->pending = 0; - cq->high = 0; - cq->maximum = cmds - 1; - - cq->ptrs.start = cmd; - cq->ptrs.in = cmd; - cq->ptrs.out = cmd; - cq->ptrs.limit = cmd + cmds; - - memory = cq->ptrs.limit; - } - - PRINTD (DBG_TX, "TX queue pair at %p", memory); - - { - tx_in * in = memory; - tx_out * out; - amb_txq * txq = &dev->txq; - - txq->pending = 0; - txq->high = 0; - txq->filled = 0; - txq->maximum = txs - 1; - - txq->in.start = in; - txq->in.ptr = in; - txq->in.limit = in + txs; - - memory = txq->in.limit; - out = memory; - - txq->out.start = out; - txq->out.ptr = out; - txq->out.limit = out + txs; - - memory = txq->out.limit; - } - - PRINTD (DBG_RX, "RX queue pairs at %p", memory); - - for (pool = 0; pool < NUM_RX_POOLS; ++pool) { - rx_in * in = memory; - rx_out * out; - amb_rxq * rxq = &dev->rxq[pool]; - - rxq->buffer_size = rx_buffer_sizes[pool]; - rxq->buffers_wanted = 0; - - rxq->pending = 0; - rxq->low = rxs[pool] - 1; - rxq->emptied = 0; - rxq->maximum = rxs[pool] - 1; - - rxq->in.start = in; - rxq->in.ptr = in; - rxq->in.limit = in + rxs[pool]; - - memory = rxq->in.limit; - out = memory; - - rxq->out.start = out; - rxq->out.ptr = out; - rxq->out.limit = out + rxs[pool]; - - memory = rxq->out.limit; - } - - if (memory == limit) { - return 0; - } else { - PRINTK (KERN_ERR, "bad queue alloc %p != %p (tell maintainer)", memory, limit); - kfree (limit - total); - return -ENOMEM; - } - -} - -/********** destruction of communication queues **********/ - -static void destroy_queues (amb_dev * dev) { - // all queues assumed empty - void * memory = dev->cq.ptrs.start; - // includes txq.in, txq.out, rxq[].in and rxq[].out - - PRINTD (DBG_FLOW, "destroy_queues %p", dev); - - PRINTD (DBG_INIT, "freeing queues at %p", memory); - kfree (memory); - - return; -} - -/********** basic loader commands and error handling **********/ -// centisecond timeouts - guessing away here -static unsigned int command_timeouts [] = { - [host_memory_test] = 15, - [read_adapter_memory] = 2, - [write_adapter_memory] = 2, - [adapter_start] = 50, - [get_version_number] = 10, - [interrupt_host] = 1, - [flash_erase_sector] = 1, - [adap_download_block] = 1, - [adap_erase_flash] = 1, - [adap_run_in_iram] = 1, - [adap_end_download] = 1 -}; - - -static unsigned int command_successes [] = { - [host_memory_test] = COMMAND_PASSED_TEST, - [read_adapter_memory] = COMMAND_READ_DATA_OK, - [write_adapter_memory] = COMMAND_WRITE_DATA_OK, - [adapter_start] = COMMAND_COMPLETE, - [get_version_number] = COMMAND_COMPLETE, - [interrupt_host] = COMMAND_COMPLETE, - [flash_erase_sector] = COMMAND_COMPLETE, - [adap_download_block] = COMMAND_COMPLETE, - [adap_erase_flash] = COMMAND_COMPLETE, - [adap_run_in_iram] = COMMAND_COMPLETE, - [adap_end_download] = COMMAND_COMPLETE -}; - -static int decode_loader_result (loader_command cmd, u32 result) -{ - int res; - const char *msg; - - if (result == command_successes[cmd]) - return 0; - - switch (result) { - case BAD_COMMAND: - res = -EINVAL; - msg = "bad command"; - break; - case COMMAND_IN_PROGRESS: - res = -ETIMEDOUT; - msg = "command in progress"; - break; - case COMMAND_PASSED_TEST: - res = 0; - msg = "command passed test"; - break; - case COMMAND_FAILED_TEST: - res = -EIO; - msg = "command failed test"; - break; - case COMMAND_READ_DATA_OK: - res = 0; - msg = "command read data ok"; - break; - case COMMAND_READ_BAD_ADDRESS: - res = -EINVAL; - msg = "command read bad address"; - break; - case COMMAND_WRITE_DATA_OK: - res = 0; - msg = "command write data ok"; - break; - case COMMAND_WRITE_BAD_ADDRESS: - res = -EINVAL; - msg = "command write bad address"; - break; - case COMMAND_WRITE_FLASH_FAILURE: - res = -EIO; - msg = "command write flash failure"; - break; - case COMMAND_COMPLETE: - res = 0; - msg = "command complete"; - break; - case COMMAND_FLASH_ERASE_FAILURE: - res = -EIO; - msg = "command flash erase failure"; - break; - case COMMAND_WRITE_BAD_DATA: - res = -EINVAL; - msg = "command write bad data"; - break; - default: - res = -EINVAL; - msg = "unknown error"; - PRINTD (DBG_LOAD|DBG_ERR, - "decode_loader_result got %d=%x !", - result, result); - break; - } - - PRINTK (KERN_ERR, "%s", msg); - return res; -} - -static int do_loader_command(volatile loader_block *lb, const amb_dev *dev, - loader_command cmd) -{ - - unsigned long timeout; - - PRINTD (DBG_FLOW|DBG_LOAD, "do_loader_command"); - - /* do a command - - Set the return value to zero, set the command type and set the - valid entry to the right magic value. The payload is already - correctly byte-ordered so we leave it alone. Hit the doorbell - with the bus address of this structure. - - */ - - lb->result = 0; - lb->command = cpu_to_be32 (cmd); - lb->valid = cpu_to_be32 (DMA_VALID); - // dump_registers (dev); - // dump_loader_block (lb); - wr_mem (dev, offsetof(amb_mem, doorbell), virt_to_bus (lb) & ~onegigmask); - - timeout = command_timeouts[cmd] * 10; - - while (!lb->result || lb->result == cpu_to_be32 (COMMAND_IN_PROGRESS)) - if (timeout) { - timeout = msleep_interruptible(timeout); - } else { - PRINTD (DBG_LOAD|DBG_ERR, "command %d timed out", cmd); - dump_registers (dev); - dump_loader_block (lb); - return -ETIMEDOUT; - } - - if (cmd == adapter_start) { - // wait for start command to acknowledge... - timeout = 100; - while (rd_plain (dev, offsetof(amb_mem, doorbell))) - if (timeout) { - timeout = msleep_interruptible(timeout); - } else { - PRINTD (DBG_LOAD|DBG_ERR, "start command did not clear doorbell, res=%08x", - be32_to_cpu (lb->result)); - dump_registers (dev); - return -ETIMEDOUT; - } - return 0; - } else { - return decode_loader_result (cmd, be32_to_cpu (lb->result)); - } - -} - -/* loader: determine loader version */ - -static int get_loader_version(loader_block *lb, const amb_dev *dev, - u32 *version) -{ - int res; - - PRINTD (DBG_FLOW|DBG_LOAD, "get_loader_version"); - - res = do_loader_command (lb, dev, get_version_number); - if (res) - return res; - if (version) - *version = be32_to_cpu (lb->payload.version); - return 0; -} - -/* loader: write memory data blocks */ - -static int loader_write(loader_block *lb, const amb_dev *dev, - const struct ihex_binrec *rec) -{ - transfer_block * tb = &lb->payload.transfer; - - PRINTD (DBG_FLOW|DBG_LOAD, "loader_write"); - - tb->address = rec->addr; - tb->count = cpu_to_be32(be16_to_cpu(rec->len) / 4); - memcpy(tb->data, rec->data, be16_to_cpu(rec->len)); - return do_loader_command (lb, dev, write_adapter_memory); -} - -/* loader: verify memory data blocks */ - -static int loader_verify(loader_block *lb, const amb_dev *dev, - const struct ihex_binrec *rec) -{ - transfer_block * tb = &lb->payload.transfer; - int res; - - PRINTD (DBG_FLOW|DBG_LOAD, "loader_verify"); - - tb->address = rec->addr; - tb->count = cpu_to_be32(be16_to_cpu(rec->len) / 4); - res = do_loader_command (lb, dev, read_adapter_memory); - if (!res && memcmp(tb->data, rec->data, be16_to_cpu(rec->len))) - res = -EINVAL; - return res; -} - -/* loader: start microcode */ - -static int loader_start(loader_block *lb, const amb_dev *dev, u32 address) -{ - PRINTD (DBG_FLOW|DBG_LOAD, "loader_start"); - - lb->payload.start = cpu_to_be32 (address); - return do_loader_command (lb, dev, adapter_start); -} - -/********** reset card **********/ - -static inline void sf (const char * msg) -{ - PRINTK (KERN_ERR, "self-test failed: %s", msg); -} - -static int amb_reset (amb_dev * dev, int diags) { - u32 word; - - PRINTD (DBG_FLOW|DBG_LOAD, "amb_reset"); - - word = rd_plain (dev, offsetof(amb_mem, reset_control)); - // put card into reset state - wr_plain (dev, offsetof(amb_mem, reset_control), word | AMB_RESET_BITS); - // wait a short while - udelay (10); -#if 1 - // put card into known good state - wr_plain (dev, offsetof(amb_mem, interrupt_control), AMB_DOORBELL_BITS); - // clear all interrupts just in case - wr_plain (dev, offsetof(amb_mem, interrupt), -1); -#endif - // clear self-test done flag - wr_plain (dev, offsetof(amb_mem, mb.loader.ready), 0); - // take card out of reset state - wr_plain (dev, offsetof(amb_mem, reset_control), word &~ AMB_RESET_BITS); - - if (diags) { - unsigned long timeout; - // 4.2 second wait - msleep(4200); - // half second time-out - timeout = 500; - while (!rd_plain (dev, offsetof(amb_mem, mb.loader.ready))) - if (timeout) { - timeout = msleep_interruptible(timeout); - } else { - PRINTD (DBG_LOAD|DBG_ERR, "reset timed out"); - return -ETIMEDOUT; - } - - // get results of self-test - // XXX double check byte-order - word = rd_mem (dev, offsetof(amb_mem, mb.loader.result)); - if (word & SELF_TEST_FAILURE) { - if (word & GPINT_TST_FAILURE) - sf ("interrupt"); - if (word & SUNI_DATA_PATTERN_FAILURE) - sf ("SUNI data pattern"); - if (word & SUNI_DATA_BITS_FAILURE) - sf ("SUNI data bits"); - if (word & SUNI_UTOPIA_FAILURE) - sf ("SUNI UTOPIA interface"); - if (word & SUNI_FIFO_FAILURE) - sf ("SUNI cell buffer FIFO"); - if (word & SRAM_FAILURE) - sf ("bad SRAM"); - // better return value? - return -EIO; - } - - } - return 0; -} - -/********** transfer and start the microcode **********/ - -static int ucode_init(loader_block *lb, amb_dev *dev) -{ - const struct firmware *fw; - unsigned long start_address; - const struct ihex_binrec *rec; - const char *errmsg = NULL; - int res; - - res = request_ihex_firmware(&fw, "atmsar11.fw", &dev->pci_dev->dev); - if (res) { - PRINTK (KERN_ERR, "Cannot load microcode data"); - return res; - } - - /* First record contains just the start address */ - rec = (const struct ihex_binrec *)fw->data; - if (be16_to_cpu(rec->len) != sizeof(__be32) || be32_to_cpu(rec->addr)) { - errmsg = "no start record"; - goto fail; - } - start_address = be32_to_cpup((__be32 *)rec->data); - - rec = ihex_next_binrec(rec); - - PRINTD (DBG_FLOW|DBG_LOAD, "ucode_init"); - - while (rec) { - PRINTD (DBG_LOAD, "starting region (%x, %u)", be32_to_cpu(rec->addr), - be16_to_cpu(rec->len)); - if (be16_to_cpu(rec->len) > 4 * MAX_TRANSFER_DATA) { - errmsg = "record too long"; - goto fail; - } - if (be16_to_cpu(rec->len) & 3) { - errmsg = "odd number of bytes"; - goto fail; - } - res = loader_write(lb, dev, rec); - if (res) - break; - - res = loader_verify(lb, dev, rec); - if (res) - break; - rec = ihex_next_binrec(rec); - } - release_firmware(fw); - if (!res) - res = loader_start(lb, dev, start_address); - - return res; -fail: - release_firmware(fw); - PRINTK(KERN_ERR, "Bad microcode data (%s)", errmsg); - return -EINVAL; -} - -/********** give adapter parameters **********/ - -static inline __be32 bus_addr(void * addr) { - return cpu_to_be32 (virt_to_bus (addr)); -} - -static int amb_talk(amb_dev *dev) -{ - adap_talk_block a; - unsigned char pool; - unsigned long timeout; - - PRINTD (DBG_FLOW, "amb_talk %p", dev); - - a.command_start = bus_addr (dev->cq.ptrs.start); - a.command_end = bus_addr (dev->cq.ptrs.limit); - a.tx_start = bus_addr (dev->txq.in.start); - a.tx_end = bus_addr (dev->txq.in.limit); - a.txcom_start = bus_addr (dev->txq.out.start); - a.txcom_end = bus_addr (dev->txq.out.limit); - - for (pool = 0; pool < NUM_RX_POOLS; ++pool) { - // the other "a" items are set up by the adapter - a.rec_struct[pool].buffer_start = bus_addr (dev->rxq[pool].in.start); - a.rec_struct[pool].buffer_end = bus_addr (dev->rxq[pool].in.limit); - a.rec_struct[pool].rx_start = bus_addr (dev->rxq[pool].out.start); - a.rec_struct[pool].rx_end = bus_addr (dev->rxq[pool].out.limit); - a.rec_struct[pool].buffer_size = cpu_to_be32 (dev->rxq[pool].buffer_size); - } - -#ifdef AMB_NEW_MICROCODE - // disable fast PLX prefetching - a.init_flags = 0; -#endif - - // pass the structure - wr_mem (dev, offsetof(amb_mem, doorbell), virt_to_bus (&a)); - - // 2.2 second wait (must not touch doorbell during 2 second DMA test) - msleep(2200); - // give the adapter another half second? - timeout = 500; - while (rd_plain (dev, offsetof(amb_mem, doorbell))) - if (timeout) { - timeout = msleep_interruptible(timeout); - } else { - PRINTD (DBG_INIT|DBG_ERR, "adapter init timed out"); - return -ETIMEDOUT; - } - - return 0; -} - -// get microcode version -static void amb_ucode_version(amb_dev *dev) -{ - u32 major; - u32 minor; - command cmd; - cmd.request = cpu_to_be32 (SRB_GET_VERSION); - while (command_do (dev, &cmd)) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - } - major = be32_to_cpu (cmd.args.version.major); - minor = be32_to_cpu (cmd.args.version.minor); - PRINTK (KERN_INFO, "microcode version is %u.%u", major, minor); -} - -// get end station address -static void amb_esi(amb_dev *dev, u8 *esi) -{ - u32 lower4; - u16 upper2; - command cmd; - - cmd.request = cpu_to_be32 (SRB_GET_BIA); - while (command_do (dev, &cmd)) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule(); - } - lower4 = be32_to_cpu (cmd.args.bia.lower4); - upper2 = be32_to_cpu (cmd.args.bia.upper2); - PRINTD (DBG_LOAD, "BIA: lower4: %08x, upper2 %04x", lower4, upper2); - - if (esi) { - unsigned int i; - - PRINTDB (DBG_INIT, "ESI:"); - for (i = 0; i < ESI_LEN; ++i) { - if (i < 4) - esi[i] = bitrev8(lower4>>(8*i)); - else - esi[i] = bitrev8(upper2>>(8*(i-4))); - PRINTDM (DBG_INIT, " %02x", esi[i]); - } - - PRINTDE (DBG_INIT, ""); - } - - return; -} - -static void fixup_plx_window (amb_dev *dev, loader_block *lb) -{ - // fix up the PLX-mapped window base address to match the block - unsigned long blb; - u32 mapreg; - blb = virt_to_bus(lb); - // the kernel stack had better not ever cross a 1Gb boundary! - mapreg = rd_plain (dev, offsetof(amb_mem, stuff[10])); - mapreg &= ~onegigmask; - mapreg |= blb & onegigmask; - wr_plain (dev, offsetof(amb_mem, stuff[10]), mapreg); - return; -} - -static int amb_init(amb_dev *dev) -{ - loader_block lb; - - u32 version; - - if (amb_reset (dev, 1)) { - PRINTK (KERN_ERR, "card reset failed!"); - } else { - fixup_plx_window (dev, &lb); - - if (get_loader_version (&lb, dev, &version)) { - PRINTK (KERN_INFO, "failed to get loader version"); - } else { - PRINTK (KERN_INFO, "loader version is %08x", version); - - if (ucode_init (&lb, dev)) { - PRINTK (KERN_ERR, "microcode failure"); - } else if (create_queues (dev, cmds, txs, rxs, rxs_bs)) { - PRINTK (KERN_ERR, "failed to get memory for queues"); - } else { - - if (amb_talk (dev)) { - PRINTK (KERN_ERR, "adapter did not accept queues"); - } else { - - amb_ucode_version (dev); - return 0; - - } /* amb_talk */ - - destroy_queues (dev); - } /* create_queues, ucode_init */ - - amb_reset (dev, 0); - } /* get_loader_version */ - - } /* amb_reset */ - - return -EINVAL; -} - -static void setup_dev(amb_dev *dev, struct pci_dev *pci_dev) -{ - unsigned char pool; - - // set up known dev items straight away - dev->pci_dev = pci_dev; - pci_set_drvdata(pci_dev, dev); - - dev->iobase = pci_resource_start (pci_dev, 1); - dev->irq = pci_dev->irq; - dev->membase = bus_to_virt(pci_resource_start(pci_dev, 0)); - - // flags (currently only dead) - dev->flags = 0; - - // Allocate cell rates (fibre) - // ATM_OC3_PCR = 1555200000/8/270*260/53 - 29/53 - // to be really pedantic, this should be ATM_OC3c_PCR - dev->tx_avail = ATM_OC3_PCR; - dev->rx_avail = ATM_OC3_PCR; - - // semaphore for txer/rxer modifications - we cannot use a - // spinlock as the critical region needs to switch processes - mutex_init(&dev->vcc_sf); - // queue manipulation spinlocks; we want atomic reads and - // writes to the queue descriptors (handles IRQ and SMP) - // consider replacing "int pending" -> "atomic_t available" - // => problem related to who gets to move queue pointers - spin_lock_init (&dev->cq.lock); - spin_lock_init (&dev->txq.lock); - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - spin_lock_init (&dev->rxq[pool].lock); -} - -static void setup_pci_dev(struct pci_dev *pci_dev) -{ - unsigned char lat; - - // enable bus master accesses - pci_set_master(pci_dev); - - // frobnicate latency (upwards, usually) - pci_read_config_byte (pci_dev, PCI_LATENCY_TIMER, &lat); - - if (!pci_lat) - pci_lat = (lat < MIN_PCI_LATENCY) ? MIN_PCI_LATENCY : lat; - - if (lat != pci_lat) { - PRINTK (KERN_INFO, "Changing PCI latency timer from %hu to %hu", - lat, pci_lat); - pci_write_config_byte(pci_dev, PCI_LATENCY_TIMER, pci_lat); - } -} - -static int amb_probe(struct pci_dev *pci_dev, - const struct pci_device_id *pci_ent) -{ - amb_dev * dev; - int err; - unsigned int irq; - - err = pci_enable_device(pci_dev); - if (err < 0) { - PRINTK (KERN_ERR, "skipped broken (PLX rev 2) card"); - goto out; - } - - // read resources from PCI configuration space - irq = pci_dev->irq; - - if (pci_dev->device == PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD) { - PRINTK (KERN_ERR, "skipped broken (PLX rev 2) card"); - err = -EINVAL; - goto out_disable; - } - - PRINTD (DBG_INFO, "found Madge ATM adapter (amb) at" - " IO %llx, IRQ %u, MEM %p", - (unsigned long long)pci_resource_start(pci_dev, 1), - irq, bus_to_virt(pci_resource_start(pci_dev, 0))); - - // check IO region - err = pci_request_region(pci_dev, 1, DEV_LABEL); - if (err < 0) { - PRINTK (KERN_ERR, "IO range already in use!"); - goto out_disable; - } - - dev = kzalloc(sizeof(amb_dev), GFP_KERNEL); - if (!dev) { - PRINTK (KERN_ERR, "out of memory!"); - err = -ENOMEM; - goto out_release; - } - - setup_dev(dev, pci_dev); - - err = amb_init(dev); - if (err < 0) { - PRINTK (KERN_ERR, "adapter initialisation failure"); - goto out_free; - } - - setup_pci_dev(pci_dev); - - // grab (but share) IRQ and install handler - err = request_irq(irq, interrupt_handler, IRQF_SHARED, DEV_LABEL, dev); - if (err < 0) { - PRINTK (KERN_ERR, "request IRQ failed!"); - goto out_reset; - } - - dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1, - NULL); - if (!dev->atm_dev) { - PRINTD (DBG_ERR, "failed to register Madge ATM adapter"); - err = -EINVAL; - goto out_free_irq; - } - - PRINTD (DBG_INFO, "registered Madge ATM adapter (no. %d) (%p) at %p", - dev->atm_dev->number, dev, dev->atm_dev); - dev->atm_dev->dev_data = (void *) dev; - - // register our address - amb_esi (dev, dev->atm_dev->esi); - - // 0 bits for vpi, 10 bits for vci - dev->atm_dev->ci_range.vpi_bits = NUM_VPI_BITS; - dev->atm_dev->ci_range.vci_bits = NUM_VCI_BITS; - - timer_setup(&dev->housekeeping, do_housekeeping, 0); - mod_timer(&dev->housekeeping, jiffies); - - // enable host interrupts - interrupts_on (dev); - -out: - return err; - -out_free_irq: - free_irq(irq, dev); -out_reset: - amb_reset(dev, 0); -out_free: - kfree(dev); -out_release: - pci_release_region(pci_dev, 1); -out_disable: - pci_disable_device(pci_dev); - goto out; -} - - -static void amb_remove_one(struct pci_dev *pci_dev) -{ - struct amb_dev *dev; - - dev = pci_get_drvdata(pci_dev); - - PRINTD(DBG_INFO|DBG_INIT, "closing %p (atm_dev = %p)", dev, dev->atm_dev); - del_timer_sync(&dev->housekeeping); - // the drain should not be necessary - drain_rx_pools(dev); - interrupts_off(dev); - amb_reset(dev, 0); - free_irq(dev->irq, dev); - pci_disable_device(pci_dev); - destroy_queues(dev); - atm_dev_deregister(dev->atm_dev); - kfree(dev); - pci_release_region(pci_dev, 1); -} - -static void __init amb_check_args (void) { - unsigned char pool; - unsigned int max_rx_size; - -#ifdef DEBUG_AMBASSADOR - PRINTK (KERN_NOTICE, "debug bitmap is %hx", debug &= DBG_MASK); -#else - if (debug) - PRINTK (KERN_NOTICE, "no debugging support"); -#endif - - if (cmds < MIN_QUEUE_SIZE) - PRINTK (KERN_NOTICE, "cmds has been raised to %u", - cmds = MIN_QUEUE_SIZE); - - if (txs < MIN_QUEUE_SIZE) - PRINTK (KERN_NOTICE, "txs has been raised to %u", - txs = MIN_QUEUE_SIZE); - - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - if (rxs[pool] < MIN_QUEUE_SIZE) - PRINTK (KERN_NOTICE, "rxs[%hu] has been raised to %u", - pool, rxs[pool] = MIN_QUEUE_SIZE); - - // buffers sizes should be greater than zero and strictly increasing - max_rx_size = 0; - for (pool = 0; pool < NUM_RX_POOLS; ++pool) - if (rxs_bs[pool] <= max_rx_size) - PRINTK (KERN_NOTICE, "useless pool (rxs_bs[%hu] = %u)", - pool, rxs_bs[pool]); - else - max_rx_size = rxs_bs[pool]; - - if (rx_lats < MIN_RX_BUFFERS) - PRINTK (KERN_NOTICE, "rx_lats has been raised to %u", - rx_lats = MIN_RX_BUFFERS); - - return; -} - -/********** module stuff **********/ - -MODULE_AUTHOR(maintainer_string); -MODULE_DESCRIPTION(description_string); -MODULE_LICENSE("GPL"); -MODULE_FIRMWARE("atmsar11.fw"); -module_param(debug, ushort, 0644); -module_param(cmds, uint, 0); -module_param(txs, uint, 0); -module_param_array(rxs, uint, NULL, 0); -module_param_array(rxs_bs, uint, NULL, 0); -module_param(rx_lats, uint, 0); -module_param(pci_lat, byte, 0); -MODULE_PARM_DESC(debug, "debug bitmap, see .h file"); -MODULE_PARM_DESC(cmds, "number of command queue entries"); -MODULE_PARM_DESC(txs, "number of TX queue entries"); -MODULE_PARM_DESC(rxs, "number of RX queue entries [" __MODULE_STRING(NUM_RX_POOLS) "]"); -MODULE_PARM_DESC(rxs_bs, "size of RX buffers [" __MODULE_STRING(NUM_RX_POOLS) "]"); -MODULE_PARM_DESC(rx_lats, "number of extra buffers to cope with RX latencies"); -MODULE_PARM_DESC(pci_lat, "PCI latency in bus cycles"); - -/********** module entry **********/ - -static const struct pci_device_id amb_pci_tbl[] = { - { PCI_VDEVICE(MADGE, PCI_DEVICE_ID_MADGE_AMBASSADOR), 0 }, - { PCI_VDEVICE(MADGE, PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD), 0 }, - { 0, } -}; - -MODULE_DEVICE_TABLE(pci, amb_pci_tbl); - -static struct pci_driver amb_driver = { - .name = "amb", - .probe = amb_probe, - .remove = amb_remove_one, - .id_table = amb_pci_tbl, -}; - -static int __init amb_module_init (void) -{ - PRINTD (DBG_FLOW|DBG_INIT, "init_module"); - - BUILD_BUG_ON(sizeof(amb_mem) != 4*16 + 4*12); - - show_version(); - - amb_check_args(); - - // get the juice - return pci_register_driver(&amb_driver); -} - -/********** module exit **********/ - -static void __exit amb_module_exit (void) -{ - PRINTD (DBG_FLOW|DBG_INIT, "cleanup_module"); - - pci_unregister_driver(&amb_driver); -} - -module_init(amb_module_init); -module_exit(amb_module_exit); diff --git a/drivers/atm/ambassador.h b/drivers/atm/ambassador.h deleted file mode 100644 index 086ceb8568dc..000000000000 --- a/drivers/atm/ambassador.h +++ /dev/null @@ -1,648 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - Madge Ambassador ATM Adapter driver. - Copyright (C) 1995-1999 Madge Networks Ltd. - -*/ - -#ifndef AMBASSADOR_H -#define AMBASSADOR_H - - -#ifdef CONFIG_ATM_AMBASSADOR_DEBUG -#define DEBUG_AMBASSADOR -#endif - -#define DEV_LABEL "amb" - -#ifndef PCI_VENDOR_ID_MADGE -#define PCI_VENDOR_ID_MADGE 0x10B6 -#endif -#ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR -#define PCI_DEVICE_ID_MADGE_AMBASSADOR 0x1001 -#endif -#ifndef PCI_VENDOR_ID_MADGE_AMBASSADOR_BAD -#define PCI_DEVICE_ID_MADGE_AMBASSADOR_BAD 0x1002 -#endif - -// diagnostic output - -#define PRINTK(severity,format,args...) \ - printk(severity DEV_LABEL ": " format "\n" , ## args) - -#ifdef DEBUG_AMBASSADOR - -#define DBG_ERR 0x0001 -#define DBG_WARN 0x0002 -#define DBG_INFO 0x0004 -#define DBG_INIT 0x0008 -#define DBG_LOAD 0x0010 -#define DBG_VCC 0x0020 -#define DBG_QOS 0x0040 -#define DBG_CMD 0x0080 -#define DBG_TX 0x0100 -#define DBG_RX 0x0200 -#define DBG_SKB 0x0400 -#define DBG_POOL 0x0800 -#define DBG_IRQ 0x1000 -#define DBG_FLOW 0x2000 -#define DBG_REGS 0x4000 -#define DBG_DATA 0x8000 -#define DBG_MASK 0xffff - -/* the ## prevents the annoying double expansion of the macro arguments */ -/* KERN_INFO is used since KERN_DEBUG often does not make it to the console */ -#define PRINTDB(bits,format,args...) \ - ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format , ## args) : 1 ) -#define PRINTDM(bits,format,args...) \ - ( (debug & (bits)) ? printk (format , ## args) : 1 ) -#define PRINTDE(bits,format,args...) \ - ( (debug & (bits)) ? printk (format "\n" , ## args) : 1 ) -#define PRINTD(bits,format,args...) \ - ( (debug & (bits)) ? printk (KERN_INFO DEV_LABEL ": " format "\n" , ## args) : 1 ) - -#else - -#define PRINTD(bits,format,args...) -#define PRINTDB(bits,format,args...) -#define PRINTDM(bits,format,args...) -#define PRINTDE(bits,format,args...) - -#endif - -#define PRINTDD(bits,format,args...) -#define PRINTDDB(sec,fmt,args...) -#define PRINTDDM(sec,fmt,args...) -#define PRINTDDE(sec,fmt,args...) - -// tunable values (?) - -/* MUST be powers of two -- why ? */ -#define COM_Q_ENTRIES 8 -#define TX_Q_ENTRIES 32 -#define RX_Q_ENTRIES 64 - -// fixed values - -// guessing -#define AMB_EXTENT 0x80 - -// Minimum allowed size for an Ambassador queue -#define MIN_QUEUE_SIZE 2 - -// Ambassador microcode allows 1 to 4 pools, we use 4 (simpler) -#define NUM_RX_POOLS 4 - -// minimum RX buffers required to cope with replenishing delay -#define MIN_RX_BUFFERS 1 - -// minimum PCI latency we will tolerate (32 IS TOO SMALL) -#define MIN_PCI_LATENCY 64 // 255 - -// VCs supported by card (VPI always 0) -#define NUM_VPI_BITS 0 -#define NUM_VCI_BITS 10 -#define NUM_VCS 1024 - -/* The status field bits defined so far. */ -#define RX_ERR 0x8000 // always present if there is an error (hmm) -#define CRC_ERR 0x4000 // AAL5 CRC error -#define LEN_ERR 0x2000 // overlength frame -#define ABORT_ERR 0x1000 // zero length field in received frame -#define UNUSED_ERR 0x0800 // buffer returned unused - -// Adaptor commands - -#define SRB_OPEN_VC 0 -/* par_0: dwordswap(VC_number) */ -/* par_1: dwordswap(flags<<16) or wordswap(flags)*/ -/* flags: */ - -/* LANE: 0x0004 */ -/* NOT_UBR: 0x0008 */ -/* ABR: 0x0010 */ - -/* RxPool0: 0x0000 */ -/* RxPool1: 0x0020 */ -/* RxPool2: 0x0040 */ -/* RxPool3: 0x0060 */ - -/* par_2: dwordswap(fp_rate<<16) or wordswap(fp_rate) */ - -#define SRB_CLOSE_VC 1 -/* par_0: dwordswap(VC_number) */ - -#define SRB_GET_BIA 2 -/* returns */ -/* par_0: dwordswap(half BIA) */ -/* par_1: dwordswap(half BIA) */ - -#define SRB_GET_SUNI_STATS 3 -/* par_0: dwordswap(physical_host_address) */ - -#define SRB_SET_BITS_8 4 -#define SRB_SET_BITS_16 5 -#define SRB_SET_BITS_32 6 -#define SRB_CLEAR_BITS_8 7 -#define SRB_CLEAR_BITS_16 8 -#define SRB_CLEAR_BITS_32 9 -/* par_0: dwordswap(ATMizer address) */ -/* par_1: dwordswap(mask) */ - -#define SRB_SET_8 10 -#define SRB_SET_16 11 -#define SRB_SET_32 12 -/* par_0: dwordswap(ATMizer address) */ -/* par_1: dwordswap(data) */ - -#define SRB_GET_32 13 -/* par_0: dwordswap(ATMizer address) */ -/* returns */ -/* par_1: dwordswap(ATMizer data) */ - -#define SRB_GET_VERSION 14 -/* returns */ -/* par_0: dwordswap(Major Version) */ -/* par_1: dwordswap(Minor Version) */ - -#define SRB_FLUSH_BUFFER_Q 15 -/* Only flags to define which buffer pool; all others must be zero */ -/* par_0: dwordswap(flags<<16) or wordswap(flags)*/ - -#define SRB_GET_DMA_SPEEDS 16 -/* returns */ -/* par_0: dwordswap(Read speed (bytes/sec)) */ -/* par_1: dwordswap(Write speed (bytes/sec)) */ - -#define SRB_MODIFY_VC_RATE 17 -/* par_0: dwordswap(VC_number) */ -/* par_1: dwordswap(fp_rate<<16) or wordswap(fp_rate) */ - -#define SRB_MODIFY_VC_FLAGS 18 -/* par_0: dwordswap(VC_number) */ -/* par_1: dwordswap(flags<<16) or wordswap(flags)*/ - -/* flags: */ - -/* LANE: 0x0004 */ -/* NOT_UBR: 0x0008 */ -/* ABR: 0x0010 */ - -/* RxPool0: 0x0000 */ -/* RxPool1: 0x0020 */ -/* RxPool2: 0x0040 */ -/* RxPool3: 0x0060 */ - -#define SRB_RATE_SHIFT 16 -#define SRB_POOL_SHIFT (SRB_FLAGS_SHIFT+5) -#define SRB_FLAGS_SHIFT 16 - -#define SRB_STOP_TASKING 19 -#define SRB_START_TASKING 20 -#define SRB_SHUT_DOWN 21 -#define MAX_SRB 21 - -#define SRB_COMPLETE 0xffffffff - -#define TX_FRAME 0x80000000 - -// number of types of SRB MUST be a power of two -- why? -#define NUM_OF_SRB 32 - -// number of bits of period info for rate -#define MAX_RATE_BITS 6 - -#define TX_UBR 0x0000 -#define TX_UBR_CAPPED 0x0008 -#define TX_ABR 0x0018 -#define TX_FRAME_NOTCAP 0x0000 -#define TX_FRAME_CAPPED 0x8000 - -#define FP_155_RATE 0x24b1 -#define FP_25_RATE 0x1f9d - -/* #define VERSION_NUMBER 0x01000000 // initial release */ -/* #define VERSION_NUMBER 0x01010000 // fixed startup probs PLX MB0 not cleared */ -/* #define VERSION_NUMBER 0x01020000 // changed SUNI reset timings; allowed r/w onchip */ - -/* #define VERSION_NUMBER 0x01030000 // clear local doorbell int reg on reset */ -/* #define VERSION_NUMBER 0x01040000 // PLX bug work around version PLUS */ -/* remove race conditions on basic interface */ -/* indicate to the host that diagnostics */ -/* have finished; if failed, how and what */ -/* failed */ -/* fix host memory test to fix PLX bug */ -/* allow flash upgrade and BIA upgrade directly */ -/* */ -#define VERSION_NUMBER 0x01050025 /* Jason's first hacked version. */ -/* Change in download algorithm */ - -#define DMA_VALID 0xb728e149 /* completely random */ - -#define FLASH_BASE 0xa0c00000 -#define FLASH_SIZE 0x00020000 /* 128K */ -#define BIA_BASE (FLASH_BASE+0x0001c000) /* Flash Sector 7 */ -#define BIA_ADDRESS ((void *)0xa0c1c000) -#define PLX_BASE 0xe0000000 - -typedef enum { - host_memory_test = 1, - read_adapter_memory, - write_adapter_memory, - adapter_start, - get_version_number, - interrupt_host, - flash_erase_sector, - adap_download_block = 0x20, - adap_erase_flash, - adap_run_in_iram, - adap_end_download -} loader_command; - -#define BAD_COMMAND (-1) -#define COMMAND_IN_PROGRESS 1 -#define COMMAND_PASSED_TEST 2 -#define COMMAND_FAILED_TEST 3 -#define COMMAND_READ_DATA_OK 4 -#define COMMAND_READ_BAD_ADDRESS 5 -#define COMMAND_WRITE_DATA_OK 6 -#define COMMAND_WRITE_BAD_ADDRESS 7 -#define COMMAND_WRITE_FLASH_FAILURE 8 -#define COMMAND_COMPLETE 9 -#define COMMAND_FLASH_ERASE_FAILURE 10 -#define COMMAND_WRITE_BAD_DATA 11 - -/* bit fields for mailbox[0] return values */ - -#define GPINT_TST_FAILURE 0x00000001 -#define SUNI_DATA_PATTERN_FAILURE 0x00000002 -#define SUNI_DATA_BITS_FAILURE 0x00000004 -#define SUNI_UTOPIA_FAILURE 0x00000008 -#define SUNI_FIFO_FAILURE 0x00000010 -#define SRAM_FAILURE 0x00000020 -#define SELF_TEST_FAILURE 0x0000003f - -/* mailbox[1] = 0 in progress, -1 on completion */ -/* mailbox[2] = current test 00 00 test(8 bit) phase(8 bit) */ -/* mailbox[3] = last failure, 00 00 test(8 bit) phase(8 bit) */ -/* mailbox[4],mailbox[5],mailbox[6] random failure values */ - -/* PLX/etc. memory map including command structure */ - -/* These registers may also be memory mapped in PCI memory */ - -#define UNUSED_LOADER_MAILBOXES 6 - -typedef struct { - u32 stuff[16]; - union { - struct { - u32 result; - u32 ready; - u32 stuff[UNUSED_LOADER_MAILBOXES]; - } loader; - struct { - u32 cmd_address; - u32 tx_address; - u32 rx_address[NUM_RX_POOLS]; - u32 gen_counter; - u32 spare; - } adapter; - } mb; - u32 doorbell; - u32 interrupt; - u32 interrupt_control; - u32 reset_control; -} amb_mem; - -/* RESET bit, IRQ (card to host) and doorbell (host to card) enable bits */ -#define AMB_RESET_BITS 0x40000000 -#define AMB_INTERRUPT_BITS 0x00000300 -#define AMB_DOORBELL_BITS 0x00030000 - -/* loader commands */ - -#define MAX_COMMAND_DATA 13 -#define MAX_TRANSFER_DATA 11 - -typedef struct { - __be32 address; - __be32 count; - __be32 data[MAX_TRANSFER_DATA]; -} transfer_block; - -typedef struct { - __be32 result; - __be32 command; - union { - transfer_block transfer; - __be32 version; - __be32 start; - __be32 data[MAX_COMMAND_DATA]; - } payload; - __be32 valid; -} loader_block; - -/* command queue */ - -/* Again all data are BIG ENDIAN */ - -typedef struct { - union { - struct { - __be32 vc; - __be32 flags; - __be32 rate; - } open; - struct { - __be32 vc; - __be32 rate; - } modify_rate; - struct { - __be32 vc; - __be32 flags; - } modify_flags; - struct { - __be32 vc; - } close; - struct { - __be32 lower4; - __be32 upper2; - } bia; - struct { - __be32 address; - } suni; - struct { - __be32 major; - __be32 minor; - } version; - struct { - __be32 read; - __be32 write; - } speed; - struct { - __be32 flags; - } flush; - struct { - __be32 address; - __be32 data; - } memory; - __be32 par[3]; - } args; - __be32 request; -} command; - -/* transmit queues and associated structures */ - -/* The hosts transmit structure. All BIG ENDIAN; host address - restricted to first 1GByte, but address passed to the card must - have the top MS bit or'ed in. -- check this */ - -/* TX is described by 1+ tx_frags followed by a tx_frag_end */ - -typedef struct { - __be32 bytes; - __be32 address; -} tx_frag; - -/* apart from handle the fields here are for the adapter to play with - and should be set to zero */ - -typedef struct { - u32 handle; - u16 vc; - u16 next_descriptor_length; - u32 next_descriptor; -#ifdef AMB_NEW_MICROCODE - u8 cpcs_uu; - u8 cpi; - u16 pad; -#endif -} tx_frag_end; - -typedef struct { - tx_frag tx_frag; - tx_frag_end tx_frag_end; - struct sk_buff * skb; -} tx_simple; - -#if 0 -typedef union { - tx_frag fragment; - tx_frag_end end_of_list; -} tx_descr; -#endif - -/* this "points" to the sequence of fragments and trailer */ - -typedef struct { - __be16 vc; - __be16 tx_descr_length; - __be32 tx_descr_addr; -} tx_in; - -/* handle is the handle from tx_in */ - -typedef struct { - u32 handle; -} tx_out; - -/* receive frame structure */ - -/* All BIG ENDIAN; handle is as passed from host; length is zero for - aborted frames, and frames with errors. Header is actually VC - number, lec-id is NOT yet supported. */ - -typedef struct { - u32 handle; - __be16 vc; - __be16 lec_id; // unused - __be16 status; - __be16 length; -} rx_out; - -/* buffer supply structure */ - -typedef struct { - u32 handle; - __be32 host_address; -} rx_in; - -/* This first structure is the area in host memory where the adapter - writes its pointer values. These pointer values are BIG ENDIAN and - reside in the same 4MB 'page' as this structure. The host gives the - adapter the address of this block by sending a doorbell interrupt - to the adapter after downloading the code and setting it going. The - addresses have the top 10 bits set to 1010000010b -- really? - - The host must initialise these before handing the block to the - adapter. */ - -typedef struct { - __be32 command_start; /* SRB commands completions */ - __be32 command_end; /* SRB commands completions */ - __be32 tx_start; - __be32 tx_end; - __be32 txcom_start; /* tx completions */ - __be32 txcom_end; /* tx completions */ - struct { - __be32 buffer_start; - __be32 buffer_end; - u32 buffer_q_get; - u32 buffer_q_end; - u32 buffer_aptr; - __be32 rx_start; /* rx completions */ - __be32 rx_end; - u32 rx_ptr; - __be32 buffer_size; /* size of host buffer */ - } rec_struct[NUM_RX_POOLS]; -#ifdef AMB_NEW_MICROCODE - u16 init_flags; - u16 talk_block_spare; -#endif -} adap_talk_block; - -/* This structure must be kept in line with the vcr image in sarmain.h - - This is the structure in the host filled in by the adapter by - GET_SUNI_STATS */ - -typedef struct { - u8 racp_chcs; - u8 racp_uhcs; - u16 spare; - u32 racp_rcell; - u32 tacp_tcell; - u32 flags; - u32 dropped_cells; - u32 dropped_frames; -} suni_stats; - -typedef enum { - dead -} amb_flags; - -#define NEXTQ(current,start,limit) \ - ( (current)+1 < (limit) ? (current)+1 : (start) ) - -typedef struct { - command * start; - command * in; - command * out; - command * limit; -} amb_cq_ptrs; - -typedef struct { - spinlock_t lock; - unsigned int pending; - unsigned int high; - unsigned int filled; - unsigned int maximum; // size - 1 (q implementation) - amb_cq_ptrs ptrs; -} amb_cq; - -typedef struct { - spinlock_t lock; - unsigned int pending; - unsigned int high; - unsigned int filled; - unsigned int maximum; // size - 1 (q implementation) - struct { - tx_in * start; - tx_in * ptr; - tx_in * limit; - } in; - struct { - tx_out * start; - tx_out * ptr; - tx_out * limit; - } out; -} amb_txq; - -typedef struct { - spinlock_t lock; - unsigned int pending; - unsigned int low; - unsigned int emptied; - unsigned int maximum; // size - 1 (q implementation) - struct { - rx_in * start; - rx_in * ptr; - rx_in * limit; - } in; - struct { - rx_out * start; - rx_out * ptr; - rx_out * limit; - } out; - unsigned int buffers_wanted; - unsigned int buffer_size; -} amb_rxq; - -typedef struct { - unsigned long tx_ok; - struct { - unsigned long ok; - unsigned long error; - unsigned long badcrc; - unsigned long toolong; - unsigned long aborted; - unsigned long unused; - } rx; -} amb_stats; - -// a single struct pointed to by atm_vcc->dev_data - -typedef struct { - u8 tx_vc_bits:7; - u8 tx_present:1; -} amb_tx_info; - -typedef struct { - unsigned char pool; -} amb_rx_info; - -typedef struct { - amb_rx_info rx_info; - u16 tx_frame_bits; - unsigned int tx_rate; - unsigned int rx_rate; -} amb_vcc; - -struct amb_dev { - u8 irq; - unsigned long flags; - u32 iobase; - u32 * membase; - - amb_cq cq; - amb_txq txq; - amb_rxq rxq[NUM_RX_POOLS]; - - struct mutex vcc_sf; - amb_tx_info txer[NUM_VCS]; - struct atm_vcc * rxer[NUM_VCS]; - unsigned int tx_avail; - unsigned int rx_avail; - - amb_stats stats; - - struct atm_dev * atm_dev; - struct pci_dev * pci_dev; - struct timer_list housekeeping; -}; - -typedef struct amb_dev amb_dev; - -#define AMB_DEV(atm_dev) ((amb_dev *) (atm_dev)->dev_data) -#define AMB_VCC(atm_vcc) ((amb_vcc *) (atm_vcc)->dev_data) - -/* rate rounding */ - -typedef enum { - round_up, - round_down, - round_nearest -} rounding; - -#endif |