diff options
Diffstat (limited to 'drivers/atm/zatm.h')
-rw-r--r-- | drivers/atm/zatm.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/drivers/atm/zatm.h b/drivers/atm/zatm.h new file mode 100644 index 000000000000..34a0480f63d6 --- /dev/null +++ b/drivers/atm/zatm.h @@ -0,0 +1,103 @@ +/* drivers/atm/zatm.h - ZeitNet ZN122x device driver declarations */ + +/* Written 1995-1998 by Werner Almesberger, EPFL LRC/ICA */ + + +#ifndef DRIVER_ATM_ZATM_H +#define DRIVER_ATM_ZATM_H + +#include <linux/config.h> +#include <linux/skbuff.h> +#include <linux/atm.h> +#include <linux/atmdev.h> +#include <linux/sonet.h> +#include <linux/pci.h> + + +#define DEV_LABEL "zatm" + +#define MAX_AAL5_PDU 10240 /* allocate for AAL5 PDUs of this size */ +#define MAX_RX_SIZE_LD 14 /* ceil(log2((MAX_AAL5_PDU+47)/48)) */ + +#define LOW_MARK 12 /* start adding new buffers if less than 12 */ +#define HIGH_MARK 30 /* stop adding buffers after reaching 30 */ +#define OFF_CNG_THRES 5 /* threshold for offset changes */ + +#define RX_SIZE 2 /* RX lookup entry size (in bytes) */ +#define NR_POOLS 32 /* number of free buffer pointers */ +#define POOL_SIZE 8 /* buffer entry size (in bytes) */ +#define NR_SHAPERS 16 /* number of shapers */ +#define SHAPER_SIZE 4 /* shaper entry size (in bytes) */ +#define VC_SIZE 32 /* VC dsc (TX or RX) size (in bytes) */ + +#define RING_ENTRIES 32 /* ring entries (without back pointer) */ +#define RING_WORDS 4 /* ring element size */ +#define RING_SIZE (sizeof(unsigned long)*(RING_ENTRIES+1)*RING_WORDS) + +#define NR_MBX 4 /* four mailboxes */ +#define MBX_RX_0 0 /* mailbox indices */ +#define MBX_RX_1 1 +#define MBX_TX_0 2 +#define MBX_TX_1 3 + +struct zatm_vcc { + /*-------------------------------- RX part */ + int rx_chan; /* RX channel, 0 if none */ + int pool; /* free buffer pool */ + /*-------------------------------- TX part */ + int tx_chan; /* TX channel, 0 if none */ + int shaper; /* shaper, <0 if none */ + struct sk_buff_head tx_queue; /* list of buffers in transit */ + wait_queue_head_t tx_wait; /* for close */ + u32 *ring; /* transmit ring */ + int ring_curr; /* current write position */ + int txing; /* number of transmits in progress */ + struct sk_buff_head backlog; /* list of buffers waiting for ring */ +}; + +struct zatm_dev { + /*-------------------------------- TX part */ + int tx_bw; /* remaining bandwidth */ + u32 free_shapers; /* bit set */ + int ubr; /* UBR shaper; -1 if none */ + int ubr_ref_cnt; /* number of VCs using UBR shaper */ + /*-------------------------------- RX part */ + int pool_ref[NR_POOLS]; /* free buffer pool usage counters */ + volatile struct sk_buff *last_free[NR_POOLS]; + /* last entry in respective pool */ + struct sk_buff_head pool[NR_POOLS];/* free buffer pools */ + struct zatm_pool_info pool_info[NR_POOLS]; /* pool information */ + /*-------------------------------- maps */ + struct atm_vcc **tx_map; /* TX VCCs */ + struct atm_vcc **rx_map; /* RX VCCs */ + int chans; /* map size, must be 2^n */ + /*-------------------------------- mailboxes */ + unsigned long mbx_start[NR_MBX];/* start addresses */ + u16 mbx_end[NR_MBX]; /* end offset (in bytes) */ + /*-------------------------------- other pointers */ + u32 pool_base; /* Free buffer pool dsc (word addr) */ + /*-------------------------------- ZATM links */ + struct atm_dev *more; /* other ZATM devices */ + /*-------------------------------- general information */ + int mem; /* RAM on board (in bytes) */ + int khz; /* timer clock */ + int copper; /* PHY type */ + unsigned char irq; /* IRQ */ + unsigned int base; /* IO base address */ + struct pci_dev *pci_dev; /* PCI stuff */ + spinlock_t lock; +}; + + +#define ZATM_DEV(d) ((struct zatm_dev *) (d)->dev_data) +#define ZATM_VCC(d) ((struct zatm_vcc *) (d)->dev_data) + + +struct zatm_skb_prv { + struct atm_skb_data _; /* reserved */ + u32 *dsc; /* pointer to skb's descriptor */ +}; + +#define ZATM_PRV_DSC(skb) (((struct zatm_skb_prv *) (skb)->cb)->dsc) + +#endif |