diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/ahci.c | 33 | ||||
-rw-r--r-- | drivers/ata/ata_piix.c | 37 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 110 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 94 | ||||
-rw-r--r-- | drivers/ata/libata-pmp.c | 2 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 1 | ||||
-rw-r--r-- | drivers/ata/libata-sff.c | 34 | ||||
-rw-r--r-- | drivers/ata/libata.h | 4 | ||||
-rw-r--r-- | drivers/ata/pata_amd.c | 76 | ||||
-rw-r--r-- | drivers/ata/pata_it821x.c | 3 | ||||
-rw-r--r-- | drivers/ata/pata_legacy.c | 7 | ||||
-rw-r--r-- | drivers/ata/pata_qdi.c | 2 | ||||
-rw-r--r-- | drivers/ata/pata_via.c | 4 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 27 | ||||
-rw-r--r-- | drivers/ata/sata_nv.c | 23 | ||||
-rw-r--r-- | drivers/ata/sata_sil.c | 2 |
16 files changed, 350 insertions, 109 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 77bba4c083cb..66e012cd3271 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -61,9 +61,14 @@ #define EM_MSG_LED_VALUE_ON 0x00010000 static int ahci_skip_host_reset; +static int ahci_ignore_sss; + module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444); MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)"); +module_param_named(ignore_sss, ahci_ignore_sss, int, 0444); +MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)"); + static int ahci_enable_alpm(struct ata_port *ap, enum link_pm policy); static void ahci_disable_alpm(struct ata_port *ap); @@ -577,18 +582,18 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */ { PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */ { PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */ - { PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci }, /* MCP89 */ + { PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci }, /* MCP89 */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ @@ -2692,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = pcim_iomap_table(pdev); host->private_data = hpriv; - if (!(hpriv->cap & HOST_CAP_SSS)) + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); if (pi.flags & ATA_FLAG_EM) ahci_reset_em(host); diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 54961c0b2c73..ef8b30d577bd 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1289,6 +1289,39 @@ static const int *__devinit piix_init_sata_map(struct pci_dev *pdev, return map; } +static bool piix_no_sidpr(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + + /* + * Samsung DB-P70 only has three ATA ports exposed and + * curiously the unconnected first port reports link online + * while not responding to SRST protocol causing excessive + * detection delay. + * + * Unfortunately, the system doesn't carry enough DMI + * information to identify the machine but does have subsystem + * vendor and device set. As it's unclear whether the + * subsystem vendor/device is used only for this specific + * board, the port can't be disabled solely with the + * information; however, turning off SIDPR access works around + * the problem. Turn it off. + * + * This problem is reported in bnc#441240. + * + * https://bugzilla.novell.com/show_bug.cgi?id=441420 + */ + if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x2920 && + pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && + pdev->subsystem_device == 0xb049) { + dev_printk(KERN_WARNING, host->dev, + "Samsung DB-P70 detected, disabling SIDPR\n"); + return true; + } + + return false; +} + static int __devinit piix_init_sidpr(struct ata_host *host) { struct pci_dev *pdev = to_pci_dev(host->dev); @@ -1302,6 +1335,10 @@ static int __devinit piix_init_sidpr(struct ata_host *host) if (hpriv->map[i] == IDE) return 0; + /* is it blacklisted? */ + if (piix_no_sidpr(host)) + return 0; + if (!(host->ports[0]->flags & PIIX_FLAG_SIDPR)) return 0; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 88c242856dae..060bcd601f57 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -164,6 +164,11 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +static bool ata_sstatus_online(u32 sstatus) +{ + return (sstatus & 0xf) == 0x3; +} + /** * ata_link_next - link iteration helper * @link: the previous link, NULL to start @@ -1015,18 +1020,6 @@ static const char *sata_spd_string(unsigned int spd) return spd_str[spd - 1]; } -void ata_dev_disable(struct ata_device *dev) -{ - if (ata_dev_enabled(dev)) { - if (ata_msg_drv(dev->link->ap)) - ata_dev_printk(dev, KERN_WARNING, "disabled\n"); - ata_acpi_on_disable(dev); - ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | - ATA_DNXFER_QUIET); - dev->class++; - } -} - static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy) { struct ata_link *link = dev->link; @@ -1329,14 +1322,16 @@ static u64 ata_id_n_sectors(const u16 *id) { if (ata_id_has_lba(id)) { if (ata_id_has_lba48(id)) - return ata_id_u64(id, 100); + return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2); else - return ata_id_u32(id, 60); + return ata_id_u32(id, ATA_ID_LBA_CAPACITY); } else { if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); + return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] * + id[ATA_ID_CUR_SECTORS]; else - return id[1] * id[3] * id[6]; + return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] * + id[ATA_ID_SECTORS]; } } @@ -2239,6 +2234,40 @@ retry: return rc; } +static int ata_do_link_spd_horkage(struct ata_device *dev) +{ + struct ata_link *plink = ata_dev_phys_link(dev); + u32 target, target_limit; + + if (!sata_scr_valid(plink)) + return 0; + + if (dev->horkage & ATA_HORKAGE_1_5_GBPS) + target = 1; + else + return 0; + + target_limit = (1 << target) - 1; + + /* if already on stricter limit, no need to push further */ + if (plink->sata_spd_limit <= target_limit) + return 0; + + plink->sata_spd_limit = target_limit; + + /* Request another EH round by returning -EAGAIN if link is + * going faster than the target speed. Forward progress is + * guaranteed by setting sata_spd_limit to target_limit above. + */ + if (plink->sata_spd > target) { + ata_dev_printk(dev, KERN_INFO, + "applying link speed limit horkage to %s\n", + sata_spd_string(target)); + return -EAGAIN; + } + return 0; +} + static inline u8 ata_dev_knobble(struct ata_device *dev) { struct ata_port *ap = dev->link->ap; @@ -2329,6 +2358,10 @@ int ata_dev_configure(struct ata_device *dev) return 0; } + rc = ata_do_link_spd_horkage(dev); + if (rc) + return rc; + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -2784,7 +2817,7 @@ int ata_bus_probe(struct ata_port *ap) /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(&ap->link); + sata_down_spd_limit(&ap->link, 0); ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } @@ -2880,21 +2913,27 @@ void ata_port_disable(struct ata_port *ap) /** * sata_down_spd_limit - adjust SATA spd limit downward * @link: Link to adjust SATA spd limit for + * @spd_limit: Additional limit * * Adjust SATA spd limit of @link downward. Note that this * function only adjusts the limit. The change must be applied * using sata_set_spd(). * + * If @spd_limit is non-zero, the speed is limited to equal to or + * lower than @spd_limit if such speed is supported. If + * @spd_limit is slower than any supported speed, only the lowest + * supported speed is allowed. + * * LOCKING: * Inherited from caller. * * RETURNS: * 0 on success, negative errno on failure */ -int sata_down_spd_limit(struct ata_link *link) +int sata_down_spd_limit(struct ata_link *link, u32 spd_limit) { u32 sstatus, spd, mask; - int rc, highbit; + int rc, bit; if (!sata_scr_valid(link)) return -EOPNOTSUPP; @@ -2903,7 +2942,7 @@ int sata_down_spd_limit(struct ata_link *link) * If not, use cached value in link->sata_spd. */ rc = sata_scr_read(link, SCR_STATUS, &sstatus); - if (rc == 0) + if (rc == 0 && ata_sstatus_online(sstatus)) spd = (sstatus >> 4) & 0xf; else spd = link->sata_spd; @@ -2913,8 +2952,8 @@ int sata_down_spd_limit(struct ata_link *link) return -EINVAL; /* unconditionally mask off the highest bit */ - highbit = fls(mask) - 1; - mask &= ~(1 << highbit); + bit = fls(mask) - 1; + mask &= ~(1 << bit); /* Mask off all speeds higher than or equal to the current * one. Force 1.5Gbps if current SPD is not available. @@ -2928,6 +2967,15 @@ int sata_down_spd_limit(struct ata_link *link) if (!mask) return -EINVAL; + if (spd_limit) { + if (mask & ((1 << spd_limit) - 1)) + mask &= (1 << spd_limit) - 1; + else { + bit = ffs(mask) - 1; + mask = 1 << bit; + } + } + link->sata_spd_limit = mask; ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n", @@ -4215,6 +4263,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices that do not need bridging limits applied */ { "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, }, + /* Devices which aren't very happy with higher link speeds */ + { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, + /* End Marker */ { } }; @@ -4563,7 +4614,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) VPRINTK("unmapping %u sg elements\n", qc->n_elem); if (qc->n_elem) - dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); + dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir); qc->flags &= ~ATA_QCFLAG_DMAMAP; qc->sg = NULL; @@ -4678,7 +4729,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) return -1; DPRINTK("%d sg elements mapped\n", n_elem); - + qc->orig_n_elem = qc->n_elem; qc->n_elem = n_elem; qc->flags |= ATA_QCFLAG_DMAMAP; @@ -4709,8 +4760,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) /** * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure + * @ap: target port * * LOCKING: * None. @@ -5175,7 +5225,7 @@ bool ata_phys_link_online(struct ata_link *link) u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && - (sstatus & 0xf) == 0x3) + ata_sstatus_online(sstatus)) return true; return false; } @@ -5199,7 +5249,7 @@ bool ata_phys_link_offline(struct ata_link *link) u32 sstatus; if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 && - (sstatus & 0xf) != 0x3) + !ata_sstatus_online(sstatus)) return true; return false; } @@ -5412,8 +5462,8 @@ void ata_dev_init(struct ata_device *dev) dev->horkage = 0; spin_unlock_irqrestore(ap->lock, flags); - memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, - sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET); + memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0, + ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN); dev->pio_mask = UINT_MAX; dev->mwdma_mask = UINT_MAX; dev->udma_mask = UINT_MAX; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 8147a8386370..ea890911d4fa 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -82,6 +82,10 @@ enum { ATA_EH_FASTDRAIN_INTERVAL = 3000, ATA_EH_UA_TRIES = 5, + + /* probe speed down parameters, see ata_eh_schedule_probe() */ + ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */ + ATA_EH_PROBE_TRIALS = 2, }; /* The following table determines how we sequence resets. Each entry @@ -1176,6 +1180,32 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc) } /** + * ata_dev_disable - disable ATA device + * @dev: ATA device to disable + * + * Disable @dev. + * + * Locking: + * EH context. + */ +void ata_dev_disable(struct ata_device *dev) +{ + if (!ata_dev_enabled(dev)) + return; + + if (ata_msg_drv(dev->link->ap)) + ata_dev_printk(dev, KERN_WARNING, "disabled\n"); + ata_acpi_on_disable(dev); + ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET); + dev->class++; + + /* From now till the next successful probe, ering is used to + * track probe failures. Clear accumulated device error info. + */ + ata_ering_clear(&dev->ering); +} + +/** * ata_eh_detach_dev - detach ATA device * @dev: ATA device to detach * @@ -1849,7 +1879,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev, /* speed down? */ if (verdict & ATA_EH_SPDN_SPEED_DOWN) { /* speed down SATA link speed if possible */ - if (sata_down_spd_limit(link) == 0) { + if (sata_down_spd_limit(link, 0) == 0) { action |= ATA_EH_RESET; goto done; } @@ -2393,11 +2423,14 @@ int ata_eh_reset(struct ata_link *link, int classify, } /* prereset() might have cleared ATA_EH_RESET. If so, - * bang classes and return. + * bang classes, thaw and return. */ if (reset && !(ehc->i.action & ATA_EH_RESET)) { ata_for_each_dev(dev, link, ALL) classes[dev->devno] = ATA_DEV_NONE; + if ((ap->pflags & ATA_PFLAG_FROZEN) && + ata_is_host_link(link)) + ata_eh_thaw_port(ap); rc = 0; goto out; } @@ -2601,11 +2634,11 @@ int ata_eh_reset(struct ata_link *link, int classify, } if (try == max_tries - 1) { - sata_down_spd_limit(link); + sata_down_spd_limit(link, 0); if (slave) - sata_down_spd_limit(slave); + sata_down_spd_limit(slave, 0); } else if (rc == -EPIPE) - sata_down_spd_limit(failed_link); + sata_down_spd_limit(failed_link, 0); if (hardreset) reset = hardreset; @@ -2744,6 +2777,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, readid_flags, dev->id); switch (rc) { case 0: + /* clear error info accumulated during probe */ + ata_ering_clear(&dev->ering); new_mask |= 1 << dev->devno; break; case -ENOENT: @@ -2869,7 +2904,7 @@ static int atapi_eh_clear_ua(struct ata_device *dev) int i; for (i = 0; i < ATA_EH_UA_TRIES; i++) { - u8 sense_buffer[SCSI_SENSE_BUFFERSIZE]; + u8 *sense_buffer = dev->link->ap->sector_buf; u8 sense_key = 0; unsigned int err_mask; @@ -2947,9 +2982,24 @@ static int ata_eh_skip_recovery(struct ata_link *link) return 1; } +static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg) +{ + u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL); + u64 now = get_jiffies_64(); + int *trials = void_arg; + + if (ent->timestamp < now - min(now, interval)) + return -1; + + (*trials)++; + return 0; +} + static int ata_eh_schedule_probe(struct ata_device *dev) { struct ata_eh_context *ehc = &dev->link->eh_context; + struct ata_link *link = ata_dev_phys_link(dev); + int trials = 0; if (!(ehc->i.probe_mask & (1 << dev->devno)) || (ehc->did_probe_mask & (1 << dev->devno))) @@ -2962,6 +3012,25 @@ static int ata_eh_schedule_probe(struct ata_device *dev) ehc->saved_xfer_mode[dev->devno] = 0; ehc->saved_ncq_enabled &= ~(1 << dev->devno); + /* Record and count probe trials on the ering. The specific + * error mask used is irrelevant. Because a successful device + * detection clears the ering, this count accumulates only if + * there are consecutive failed probes. + * + * If the count is equal to or higher than ATA_EH_PROBE_TRIALS + * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is + * forced to 1.5Gbps. + * + * This is to work around cases where failed link speed + * negotiation results in device misdetection leading to + * infinite DEVXCHG or PHRDY CHG events. + */ + ata_ering_record(&dev->ering, 0, AC_ERR_OTHER); + ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials); + + if (trials > ATA_EH_PROBE_TRIALS) + sata_down_spd_limit(link, 1); + return 1; } @@ -2969,7 +3038,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) { struct ata_eh_context *ehc = &dev->link->eh_context; - ehc->tries[dev->devno]--; + /* -EAGAIN from EH routine indicates retry without prejudice. + * The requester is responsible for ensuring forward progress. + */ + if (err != -EAGAIN) + ehc->tries[dev->devno]--; switch (err) { case -ENODEV: @@ -2979,12 +3052,13 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err) /* give it just one more chance */ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1); case -EIO: - if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) { + if (ehc->tries[dev->devno] == 1) { /* This is the last chance, better to slow * down than lose it. */ - sata_down_spd_limit(ata_dev_phys_link(dev)); - ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); + sata_down_spd_limit(ata_dev_phys_link(dev), 0); + if (dev->pio_mode > XFER_PIO_0) + ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); } } diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 98ca07a2db87..619f2c33950e 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -729,7 +729,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap, if (tries) { /* consecutive revalidation failures? speed down */ if (reval_failed) - sata_down_spd_limit(link); + sata_down_spd_limit(link, 0); else reval_failed = 1; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3c4c5ae277ba..b9747fa59e54 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -415,6 +415,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, /** * ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl + * @ap: target port * @sdev: SCSI device to get identify data for * @arg: User buffer area for identify data * diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 0b299b0f8172..f93dc029dfde 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -773,18 +773,32 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, else iowrite32_rep(data_addr, buf, words); + /* Transfer trailing bytes, if any */ if (unlikely(slop)) { - __le32 pad; + unsigned char pad[4]; + + /* Point buf to the tail of buffer */ + buf += buflen - slop; + + /* + * Use io*_rep() accessors here as well to avoid pointlessly + * swapping bytes to and fro on the big endian machines... + */ if (rw == READ) { - pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr)); - memcpy(buf + buflen - slop, &pad, slop); + if (slop < 3) + ioread16_rep(data_addr, pad, 1); + else + ioread32_rep(data_addr, pad, 1); + memcpy(buf, pad, slop); } else { - memcpy(&pad, buf + buflen - slop, slop); - iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr); + memcpy(pad, buf, slop); + if (slop < 3) + iowrite16_rep(data_addr, pad, 1); + else + iowrite32_rep(data_addr, pad, 1); } - words++; } - return words << 2; + return (buflen + 1) & ~1; } EXPORT_SYMBOL_GPL(ata_sff_data_xfer32); @@ -2052,6 +2066,7 @@ static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask, iowrite8(ap->ctl | ATA_SRST, ioaddr->ctl_addr); udelay(20); /* FIXME: flush */ iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; /* wait the port to become ready */ return ata_sff_wait_after_reset(&ap->link, devmask, deadline); @@ -2176,8 +2191,10 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) } /* set up device control */ - if (ap->ioaddr.ctl_addr) + if (ap->ioaddr.ctl_addr) { iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + ap->last_ctl = ap->ctl; + } } EXPORT_SYMBOL_GPL(ata_sff_postreset); @@ -2520,6 +2537,7 @@ void ata_bus_reset(struct ata_port *ap) if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { /* set up device control for ATA_FLAG_SATA_RESET */ iowrite8(ap->ctl, ioaddr->ctl_addr); + ap->last_ctl = ap->ctl; } DPRINTK("EXIT\n"); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index fe2839e58774..cea8014cd87e 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -79,7 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev); -extern void ata_dev_disable(struct ata_device *dev); extern void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay); extern void ata_port_flush_task(struct ata_port *ap); @@ -100,7 +99,7 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags); extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class, unsigned int readid_flags); extern int ata_dev_configure(struct ata_device *dev); -extern int sata_down_spd_limit(struct ata_link *link); +extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -160,6 +159,7 @@ extern void ata_scsi_error(struct Scsi_Host *host); extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_eh_fastdrain_timerfn(unsigned long arg); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +extern void ata_dev_disable(struct ata_device *dev); extern void ata_eh_detach_dev(struct ata_device *dev); extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, unsigned int action); diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 63719ab9ea44..115b1cd6dcf5 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.11" +#define DRV_VERSION "0.4.1" /** * timing_setup - shared timing computation and load @@ -145,6 +145,13 @@ static int amd_pre_reset(struct ata_link *link, unsigned long deadline) return ata_sff_prereset(link, deadline); } +/** + * amd_cable_detect - report cable type + * @ap: port + * + * AMD controller/BIOS setups record the cable type in word 0x42 + */ + static int amd_cable_detect(struct ata_port *ap) { static const u32 bitmask[2] = {0x03, 0x0C}; @@ -158,6 +165,40 @@ static int amd_cable_detect(struct ata_port *ap) } /** + * amd_fifo_setup - set the PIO FIFO for ATA/ATAPI + * @ap: ATA interface + * @adev: ATA device + * + * Set the PCI fifo for this device according to the devices present + * on the bus at this point in time. We need to turn the post write buffer + * off for ATAPI devices as we may need to issue a word sized write to the + * device as the final I/O + */ + +static void amd_fifo_setup(struct ata_port *ap) +{ + struct ata_device *adev; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static const u8 fifobit[2] = { 0xC0, 0x30}; + u8 fifo = fifobit[ap->port_no]; + u8 r; + + + ata_for_each_dev(adev, &ap->link, ENABLED) { + if (adev->class == ATA_DEV_ATAPI) + fifo = 0; + } + if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) /* FIFO is broken */ + fifo = 0; + + /* On the later chips the read prefetch bits become no-op bits */ + pci_read_config_byte(pdev, 0x41, &r); + r &= ~fifobit[ap->port_no]; + r |= fifo; + pci_write_config_byte(pdev, 0x41, r); +} + +/** * amd33_set_piomode - set initial PIO mode data * @ap: ATA interface * @adev: ATA device @@ -167,21 +208,25 @@ static int amd_cable_detect(struct ata_port *ap) static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 1); } static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 2); } static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 3); } static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev) { + amd_fifo_setup(ap); timing_setup(ap, adev, 0x40, adev->pio_mode, 4); } @@ -397,6 +442,16 @@ static struct ata_port_operations nv133_port_ops = { .set_dmamode = nv133_set_dmamode, }; +static void amd_clear_fifo(struct pci_dev *pdev) +{ + u8 fifo; + /* Disable the FIFO, the FIFO logic will re-enable it as + appropriate */ + pci_read_config_byte(pdev, 0x41, &fifo); + fifo &= 0x0F; + pci_write_config_byte(pdev, 0x41, fifo); +} + static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info[10] = { @@ -503,14 +558,8 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (type < 3) ata_pci_bmdma_clear_simplex(pdev); - - /* Check for AMD7411 */ - if (type == 3) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); - + if (pdev->vendor == PCI_VENDOR_ID_AMD) + amd_clear_fifo(pdev); /* Cable detection on Nvidia chips doesn't work too well, * cache BIOS programmed UDMA mode. */ @@ -536,18 +585,11 @@ static int amd_reinit_one(struct pci_dev *pdev) return rc; if (pdev->vendor == PCI_VENDOR_ID_AMD) { - u8 fifo; - pci_read_config_byte(pdev, 0x41, &fifo); - if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7411) - /* FIFO is broken */ - pci_write_config_byte(pdev, 0x41, fifo & 0x0F); - else - pci_write_config_byte(pdev, 0x41, fifo | 0xF0); + amd_clear_fifo(pdev); if (pdev->device == PCI_DEVICE_ID_AMD_VIPER_7409 || pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401) ata_pci_bmdma_clear_simplex(pdev); } - ata_host_resume(host); return 0; } diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index f1bb2f9fecbf..b05b86a912c5 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -557,6 +557,9 @@ static unsigned int it821x_read_id(struct ata_device *adev, id[83] |= 0x4400; /* Word 83 is valid and LBA48 */ id[86] |= 0x0400; /* LBA48 on */ id[ATA_ID_MAJOR_VER] |= 0x1F; + /* Clear the serial number because it's different each boot + which breaks validation on resume */ + memset(&id[ATA_ID_SERNO], 0x20, ATA_ID_SERNO_LEN); } return err_mask; } diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6c1d778b63a9..e3bc1b436284 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -283,9 +283,10 @@ static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev) static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { - if (ata_id_has_dword_io(dev->id)) { + int slop = buflen & 3; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { struct ata_port *ap = dev->link->ap; - int slop = buflen & 3; unsigned long flags; local_irq_save(flags); @@ -735,7 +736,7 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index 3080f371222c..f1b26f7c8e4d 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -12,7 +12,7 @@ * * Probe code based on drivers/ide/legacy/qd65xx.c * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by - * Samuel Thibault <samuel.thibault@fnac.net> + * Samuel Thibault <samuel.thibault@ens-lyon.org> */ #include <linux/kernel.h> diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 79a6c9a0b721..ba556d3e6963 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -110,7 +110,8 @@ static const struct via_isa_bridge { { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES}, + { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, + { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -593,6 +594,7 @@ static int via_reinit_one(struct pci_dev *pdev) #endif static const struct pci_device_id via[] = { + { PCI_VDEVICE(VIA, 0x0415), }, { PCI_VDEVICE(VIA, 0x0571), }, { PCI_VDEVICE(VIA, 0x0581), }, { PCI_VDEVICE(VIA, 0x1571), }, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index f2d8a020ea53..74b1080d116d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -663,8 +663,8 @@ static const struct pci_device_id mv_pci_tbl[] = { { PCI_VDEVICE(MARVELL, 0x5081), chip_508x }, /* RocketRAID 1720/174x have different identifiers */ { PCI_VDEVICE(TTI, 0x1720), chip_6042 }, - { PCI_VDEVICE(TTI, 0x1740), chip_508x }, - { PCI_VDEVICE(TTI, 0x1742), chip_508x }, + { PCI_VDEVICE(TTI, 0x1740), chip_6042 }, + { PCI_VDEVICE(TTI, 0x1742), chip_6042 }, { PCI_VDEVICE(MARVELL, 0x6040), chip_604x }, { PCI_VDEVICE(MARVELL, 0x6041), chip_604x }, @@ -2218,12 +2218,13 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) else handled = mv_host_intr(host, pending_irqs); } - spin_unlock(&host->lock); /* for MSI: unmask; interrupt cause bits will retrigger now */ if (using_msi) writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + spin_unlock(&host->lock); + return IRQ_RETVAL(handled); } @@ -3114,19 +3115,17 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (!IS_SOC(hpriv)) { - /* Clear any currently outstanding host interrupt conditions */ - writelfl(0, mmio + hpriv->irq_cause_ofs); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + hpriv->irq_cause_ofs); - /* and unmask interrupt generation for host regs */ - writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); + /* and unmask interrupt generation for host regs */ + writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs); - /* - * enable only global host interrupts for now. - * The per-port interrupts get done later as ports are set up. - */ - mv_set_main_irq_mask(host, 0, PCI_ERR); - } + /* + * enable only global host interrupts for now. + * The per-port interrupts get done later as ports are set up. + */ + mv_set_main_irq_mask(host, 0, PCI_ERR); done: return rc; } diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index c49ad0e61b6f..f65b53785a8f 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -421,26 +421,33 @@ static struct ata_port_operations nv_generic_ops = { .hardreset = ATA_OP_NULL, }; -/* OSDL bz3352 reports that nf2/3 controllers can't determine device - * signature reliably. Also, the following thread reports detection - * failure on cold boot with the standard debouncing timing. +/* nf2 is ripe with hardreset related problems. + * + * kernel bz#3352 reports nf2/3 controllers can't determine device + * signature reliably. The following thread reports detection failure + * on cold boot with the standard debouncing timing. * * http://thread.gmane.org/gmane.linux.ide/34098 * - * Debounce with hotplug timing and request follow-up SRST. + * And bz#12176 reports that hardreset simply doesn't work on nf2. + * Give up on it and just don't do hardreset. */ static struct ata_port_operations nv_nf2_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_noclassify_hardreset, }; -/* CK804 finally gets hardreset right */ +/* For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port by + * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS + * in somewhat undeterministic way. Use noclassify hardreset. + */ static struct ata_port_operations nv_ck804_ops = { .inherits = &nv_common_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, + .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; @@ -2516,7 +2523,7 @@ static void __exit nv_exit(void) module_init(nv_init); module_exit(nv_exit); module_param_named(adma, adma_enabled, bool, 0444); -MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)"); +MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)"); module_param_named(swncq, swncq_enabled, bool, 0444); MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)"); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 9f029595f454..d0091609e210 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -324,7 +324,7 @@ static void sil_fill_sg(struct ata_queued_cmd *qc) prd->addr = cpu_to_le32(addr); prd->flags_len = cpu_to_le32(sg_len); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len); last_prd = prd; prd++; |