diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/sata_via.c | 52 |
1 files changed, 50 insertions, 2 deletions
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 9804054e22a7..0636d84fbefe 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -61,6 +61,7 @@ enum { SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ SATA_INT_GATE = 0x41, /* SATA interrupt gating */ SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + SVIA_MISC_3 = 0x46, /* Miscellaneous Control III */ PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ PATA_PIO_TIMING = 0xAB, /* PATA timing register */ @@ -71,6 +72,8 @@ enum { NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ + + SATA_HOTPLUG = (1 << 5), /* enable IRQ on hotplug */ }; struct svia_priv { @@ -553,6 +556,37 @@ static void svia_wd_fix(struct pci_dev *pdev) pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2)); } +static irqreturn_t vt6421_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance); + + /* if the IRQ was not handled, it might be a hotplug IRQ */ + if (rc != IRQ_HANDLED) { + u32 serror; + unsigned long flags; + + spin_lock_irqsave(&host->lock, flags); + /* check for hotplug on port 0 */ + svia_scr_read(&host->ports[0]->link, SCR_ERROR, &serror); + if (serror & SERR_PHYRDY_CHG) { + ata_ehi_hotplugged(&host->ports[0]->link.eh_info); + ata_port_freeze(host->ports[0]); + rc = IRQ_HANDLED; + } + /* check for hotplug on port 1 */ + svia_scr_read(&host->ports[1]->link, SCR_ERROR, &serror); + if (serror & SERR_PHYRDY_CHG) { + ata_ehi_hotplugged(&host->ports[1]->link.eh_info); + ata_port_freeze(host->ports[1]); + rc = IRQ_HANDLED; + } + spin_unlock_irqrestore(&host->lock, flags); + } + + return rc; +} + static void vt6421_error_handler(struct ata_port *ap) { struct svia_priv *hpriv = ap->host->private_data; @@ -610,6 +644,16 @@ static void svia_configure(struct pci_dev *pdev, int board_id, pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); } + /* enable IRQ on hotplug */ + pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8); + if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) { + dev_dbg(&pdev->dev, + "enabling SATA hotplug (0x%x)\n", + (int) tmp8); + tmp8 |= SATA_HOTPLUG; + pci_write_config_byte(pdev, SVIA_MISC_3, tmp8); + } + /* * vt6420/1 has problems talking to some drives. The following * is the fix from Joseph Chan <JosephChan@via.com.tw>. @@ -698,8 +742,12 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) svia_configure(pdev, board_id, hpriv); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, - IRQF_SHARED, &svia_sht); + if (board_id == vt6421) + return ata_host_activate(host, pdev->irq, vt6421_interrupt, + IRQF_SHARED, &svia_sht); + else + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &svia_sht); } #ifdef CONFIG_PM_SLEEP |