diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 12 | ||||
-rw-r--r-- | drivers/ata/Makefile | 1 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 3 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 2 | ||||
-rw-r--r-- | drivers/ata/pata_buddha.c | 257 | ||||
-rw-r--r-- | drivers/ata/pata_macio.c | 2 | ||||
-rw-r--r-- | drivers/ata/pata_of_platform.c | 6 | ||||
-rw-r--r-- | drivers/ata/pata_platform.c | 24 | ||||
-rw-r--r-- | drivers/ata/pata_samsung_cf.c | 8 |
9 files changed, 295 insertions, 20 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 8218db17ebdb..a6beb2c5a692 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -963,6 +963,18 @@ config PATA_GAYLE If unsure, say N. +config PATA_BUDDHA + tristate "Buddha/Catweasel/X-Surf PATA support" + depends on ZORRO + help + This option enables support for the IDE interfaces + on the Buddha, Catweasel and X-Surf expansion boards + on the Zorro expansion bus. It supports up to two + interfaces on the Buddha, three on the Catweasel and + two on the X-Surf. + + If unsure, say N. + config PATA_ISAPNP tristate "ISA Plug and Play PATA support" depends on ISAPNP diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d21cdd83f7ab..d8cc2e04a6c7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_PATA_WINBOND) += pata_sl82c105.o obj-$(CONFIG_PATA_CMD640_PCI) += pata_cmd640.o obj-$(CONFIG_PATA_FALCON) += pata_falcon.o obj-$(CONFIG_PATA_GAYLE) += pata_gayle.o +obj-$(CONFIG_PATA_BUDDHA) += pata_buddha.o obj-$(CONFIG_PATA_ISAPNP) += pata_isapnp.o obj-$(CONFIG_PATA_IXP4XX_CF) += pata_ixp4xx_cf.o obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index b5f57c69c487..692782dddc0f 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -2599,7 +2599,8 @@ int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht) int rc; if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) { - if (hpriv->irq_handler) + if (hpriv->irq_handler && + hpriv->irq_handler != ahci_single_level_irq_intr) dev_warn(host->dev, "both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented\n"); if (!hpriv->get_irq_vector) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 3d4887d0e84a..c2adfd8486c4 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2990,7 +2990,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) * This inconsistency confuses several controllers which * perform PIO using DMA such as Intel AHCIs and sil3124/32. * These controllers use actual number of transferred bytes to - * update DMA poitner and transfer of 4n+2 bytes make those + * update DMA pointer and transfer of 4n+2 bytes make those * controller push DMA pointer by 4n+4 bytes because SATA data * FISes are aligned to 4 bytes. This causes data corruption * and buffer overrun. diff --git a/drivers/ata/pata_buddha.c b/drivers/ata/pata_buddha.c new file mode 100644 index 000000000000..11a8044ff633 --- /dev/null +++ b/drivers/ata/pata_buddha.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * Buddha, Catweasel and X-Surf PATA controller driver + * + * Copyright (c) 2018 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Based on buddha.c: + * + * Copyright (C) 1997, 2001 by Geert Uytterhoeven and others + */ + +#include <linux/ata.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/libata.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/zorro.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> + +#include <asm/amigahw.h> +#include <asm/amigaints.h> +#include <asm/ide.h> +#include <asm/setup.h> + +#define DRV_NAME "pata_buddha" +#define DRV_VERSION "0.1.0" + +#define BUDDHA_BASE1 0x800 +#define BUDDHA_BASE2 0xa00 +#define BUDDHA_BASE3 0xc00 +#define XSURF_BASE1 0xb000 /* 2.5" interface */ +#define XSURF_BASE2 0xd000 /* 3.5" interface */ +#define BUDDHA_CONTROL 0x11a +#define BUDDHA_IRQ 0xf00 +#define XSURF_IRQ 0x7e +#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */ + +enum { + BOARD_BUDDHA = 0, + BOARD_CATWEASEL, + BOARD_XSURF +}; + +static unsigned int buddha_bases[3] __initdata = { + BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3 +}; + +static unsigned int xsurf_bases[2] __initdata = { + XSURF_BASE1, XSURF_BASE2 +}; + +static struct scsi_host_template pata_buddha_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +/* FIXME: is this needed? */ +static unsigned int pata_buddha_data_xfer(struct ata_queued_cmd *qc, + unsigned char *buf, + unsigned int buflen, int rw) +{ + struct ata_device *dev = qc->dev; + struct ata_port *ap = dev->link->ap; + void __iomem *data_addr = ap->ioaddr.data_addr; + unsigned int words = buflen >> 1; + + /* Transfer multiple of 2 bytes */ + if (rw == READ) + raw_insw((u16 *)data_addr, (u16 *)buf, words); + else + raw_outsw((u16 *)data_addr, (u16 *)buf, words); + + /* Transfer trailing byte, if any. */ + if (unlikely(buflen & 0x01)) { + unsigned char pad[2] = { }; + + /* Point buf to the tail of buffer */ + buf += buflen - 1; + + if (rw == READ) { + raw_insw((u16 *)data_addr, (u16 *)pad, 1); + *buf = pad[0]; + } else { + pad[0] = *buf; + raw_outsw((u16 *)data_addr, (u16 *)pad, 1); + } + words++; + } + + return words << 1; +} + +/* + * Provide our own set_mode() as we don't want to change anything that has + * already been configured.. + */ +static int pata_buddha_set_mode(struct ata_link *link, + struct ata_device **unused) +{ + struct ata_device *dev; + + ata_for_each_dev(dev, link, ENABLED) { + /* We don't really care */ + dev->pio_mode = dev->xfer_mode = XFER_PIO_0; + dev->xfer_shift = ATA_SHIFT_PIO; + dev->flags |= ATA_DFLAG_PIO; + ata_dev_info(dev, "configured for PIO\n"); + } + return 0; +} + +static bool pata_buddha_irq_check(struct ata_port *ap) +{ + u8 ch; + + ch = z_readb((unsigned long)ap->private_data); + + return !!(ch & 0x80); +} + +static void pata_xsurf_irq_clear(struct ata_port *ap) +{ + z_writeb(0, (unsigned long)ap->private_data); +} + +static struct ata_port_operations pata_buddha_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = pata_buddha_data_xfer, + .sff_irq_check = pata_buddha_irq_check, + .cable_detect = ata_cable_unknown, + .set_mode = pata_buddha_set_mode, +}; + +static struct ata_port_operations pata_xsurf_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = pata_buddha_data_xfer, + .sff_irq_check = pata_buddha_irq_check, + .sff_irq_clear = pata_xsurf_irq_clear, + .cable_detect = ata_cable_unknown, + .set_mode = pata_buddha_set_mode, +}; + +static int __init pata_buddha_init_one(void) +{ + struct zorro_dev *z = NULL; + + while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { + static const char *board_name[] + = { "Buddha", "Catweasel", "X-Surf" }; + struct ata_host *host; + void __iomem *buddha_board; + unsigned long board; + unsigned int type, nr_ports = 2; + int i; + + if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) { + type = BOARD_BUDDHA; + } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) { + type = BOARD_CATWEASEL; + nr_ports++; + } else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) { + type = BOARD_XSURF; + } else + continue; + + dev_info(&z->dev, "%s IDE controller\n", board_name[type]); + + board = z->resource.start; + + if (type != BOARD_XSURF) { + if (!devm_request_mem_region(&z->dev, + board + BUDDHA_BASE1, + 0x800, DRV_NAME)) + continue; + } else { + if (!devm_request_mem_region(&z->dev, + board + XSURF_BASE1, + 0x1000, DRV_NAME)) + continue; + if (!devm_request_mem_region(&z->dev, + board + XSURF_BASE2, + 0x1000, DRV_NAME)) + continue; + } + + /* allocate host */ + host = ata_host_alloc(&z->dev, nr_ports); + if (!host) + continue; + + buddha_board = ZTWO_VADDR(board); + + /* enable the board IRQ on Buddha/Catweasel */ + if (type != BOARD_XSURF) + z_writeb(0, buddha_board + BUDDHA_IRQ_MR); + + for (i = 0; i < nr_ports; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *base, *irqport; + unsigned long ctl = 0; + + if (type != BOARD_XSURF) { + ap->ops = &pata_buddha_ops; + base = buddha_board + buddha_bases[i]; + ctl = BUDDHA_CONTROL; + irqport = buddha_board + BUDDHA_IRQ + i * 0x40; + } else { + ap->ops = &pata_xsurf_ops; + base = buddha_board + xsurf_bases[i]; + /* X-Surf has no CS1* (Control/AltStat) */ + irqport = buddha_board + XSURF_IRQ; + } + + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY; + + ap->ioaddr.data_addr = base; + ap->ioaddr.error_addr = base + 2 + 1 * 4; + ap->ioaddr.feature_addr = base + 2 + 1 * 4; + ap->ioaddr.nsect_addr = base + 2 + 2 * 4; + ap->ioaddr.lbal_addr = base + 2 + 3 * 4; + ap->ioaddr.lbam_addr = base + 2 + 4 * 4; + ap->ioaddr.lbah_addr = base + 2 + 5 * 4; + ap->ioaddr.device_addr = base + 2 + 6 * 4; + ap->ioaddr.status_addr = base + 2 + 7 * 4; + ap->ioaddr.command_addr = base + 2 + 7 * 4; + + if (ctl) { + ap->ioaddr.altstatus_addr = base + ctl; + ap->ioaddr.ctl_addr = base + ctl; + } + + ap->private_data = (void *)irqport; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", board, + ctl ? board + buddha_bases[i] + ctl : 0); + } + + ata_host_activate(host, IRQ_AMIGA_PORTS, ata_sff_interrupt, + IRQF_SHARED, &pata_buddha_sht); + + } + + return 0; +} + +module_init(pata_buddha_init_one); + +MODULE_AUTHOR("Bartlomiej Zolnierkiewicz"); +MODULE_DESCRIPTION("low-level driver for Buddha/Catweasel/X-Surf PATA"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION(DRV_VERSION); diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c index 9e7fc302430f..456ae7184f92 100644 --- a/drivers/ata/pata_macio.c +++ b/drivers/ata/pata_macio.c @@ -954,7 +954,7 @@ static void pata_macio_invariants(struct pata_macio_priv *priv) priv->kind = controller_k2_ata6; priv->timings = pata_macio_kauai_timings; } else if (of_device_is_compatible(priv->node, "keylargo-ata")) { - if (strcmp(priv->node->name, "ata-4") == 0) { + if (of_node_name_eq(priv->node, "ata-4")) { priv->kind = controller_kl_ata4; priv->timings = pata_macio_kl66_timings; } else { diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c index 01161c1aef4d..7a0b1759e5f0 100644 --- a/drivers/ata/pata_of_platform.c +++ b/drivers/ata/pata_of_platform.c @@ -32,6 +32,7 @@ static int pata_of_platform_probe(struct platform_device *ofdev) unsigned int reg_shift = 0; int pio_mode = 0; int pio_mask; + bool use16bit; ret = of_address_to_resource(dn, 0, &io_res); if (ret) { @@ -60,11 +61,14 @@ static int pata_of_platform_probe(struct platform_device *ofdev) dev_info(&ofdev->dev, "pio-mode unspecified, assuming PIO0\n"); } + use16bit = of_property_read_bool(dn, "ata-generic,use16bit"); + pio_mask = 1 << pio_mode; pio_mask |= (1 << pio_mode) - 1; return __pata_platform_probe(&ofdev->dev, &io_res, &ctl_res, irq_res, - reg_shift, pio_mask, &pata_platform_sht); + reg_shift, pio_mask, &pata_platform_sht, + use16bit); } static const struct of_device_id pata_of_platform_match[] = { diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index d6f8f5406442..5aba691f09af 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -47,13 +47,6 @@ static struct scsi_host_template pata_platform_sht = { ATA_PIO_SHT(DRV_NAME), }; -static struct ata_port_operations pata_platform_port_ops = { - .inherits = &ata_sff_port_ops, - .sff_data_xfer = ata_sff_data_xfer32, - .cable_detect = ata_cable_unknown, - .set_mode = pata_platform_set_mode, -}; - static void pata_platform_setup_port(struct ata_ioports *ioaddr, unsigned int shift) { @@ -79,6 +72,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr, * @ioport_shift: I/O port shift * @__pio_mask: PIO mask * @sht: scsi_host_template to use when registering + * @use16bit: Flag to indicate 16-bit IO instead of 32-bit * * Register a platform bus IDE interface. Such interfaces are PIO and we * assume do not support IRQ sharing. @@ -101,7 +95,7 @@ static void pata_platform_setup_port(struct ata_ioports *ioaddr, int __pata_platform_probe(struct device *dev, struct resource *io_res, struct resource *ctl_res, struct resource *irq_res, unsigned int ioport_shift, int __pio_mask, - struct scsi_host_template *sht) + struct scsi_host_template *sht, bool use16bit) { struct ata_host *host; struct ata_port *ap; @@ -120,7 +114,7 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res, */ if (irq_res && irq_res->start > 0) { irq = irq_res->start; - irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; + irq_flags = (irq_res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; } /* @@ -131,7 +125,15 @@ int __pata_platform_probe(struct device *dev, struct resource *io_res, return -ENOMEM; ap = host->ports[0]; - ap->ops = &pata_platform_port_ops; + ap->ops = devm_kzalloc(dev, sizeof(*ap->ops), GFP_KERNEL); + ap->ops->inherits = &ata_sff_port_ops; + ap->ops->cable_detect = ata_cable_unknown; + ap->ops->set_mode = pata_platform_set_mode; + if (use16bit) + ap->ops->sff_data_xfer = ata_sff_data_xfer; + else + ap->ops->sff_data_xfer = ata_sff_data_xfer32; + ap->pio_mask = __pio_mask; ap->flags |= ATA_FLAG_SLAVE_POSS; @@ -218,7 +220,7 @@ static int pata_platform_probe(struct platform_device *pdev) return __pata_platform_probe(&pdev->dev, io_res, ctl_res, irq_res, pp_info ? pp_info->ioport_shift : 0, - pio_mask, &pata_platform_sht); + pio_mask, &pata_platform_sht, false); } static struct platform_driver pata_platform_driver = { diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index f5bd44b8bd63..1dc3361cb5a5 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -609,17 +609,15 @@ static int __exit pata_s3c_remove(struct platform_device *pdev) #ifdef CONFIG_PM_SLEEP static int pata_s3c_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ata_host *host = platform_get_drvdata(pdev); + struct ata_host *host = dev_get_drvdata(dev); return ata_host_suspend(host, PMSG_SUSPEND); } static int pata_s3c_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct ata_host *host = platform_get_drvdata(pdev); - struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev); + struct ata_host *host = dev_get_drvdata(dev); + struct s3c_ide_platdata *pdata = dev_get_platdata(dev); struct s3c_ide_info *info = host->private_data; pata_s3c_hwinit(info, pdata); |