summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci.c4
-rw-r--r--drivers/ata/libahci.c10
-rw-r--r--drivers/ata/libahci_platform.c2
-rw-r--r--drivers/ata/libata-core.c26
-rw-r--r--drivers/ata/libata-eh.c3
-rw-r--r--drivers/ata/libata-scsi.c12
-rw-r--r--drivers/ata/sata_rcar.c62
7 files changed, 88 insertions, 31 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 355a95a83a34..1ff17799769d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -550,7 +550,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
.driver_data = board_ahci_yes_fbs },
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
.driver_data = board_ahci_yes_fbs },
- { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642),
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), /* highpoint rocketraid 642L */
+ .driver_data = board_ahci_yes_fbs },
+ { PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0645), /* highpoint rocketraid 644L */
.driver_data = board_ahci_yes_fbs },
/* Promise */
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index a0de7a38430c..7adcf3caabd0 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -665,6 +665,16 @@ int ahci_stop_engine(struct ata_port *ap)
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
return 0;
+ /*
+ * Don't try to issue commands but return with ENODEV if the
+ * AHCI controller not available anymore (e.g. due to PCIe hot
+ * unplugging). Otherwise a 500ms delay for each port is added.
+ */
+ if (tmp == 0xffffffff) {
+ dev_err(ap->host->dev, "AHCI controller unavailable!\n");
+ return -ENODEV;
+ }
+
/* setting HBA to idle */
tmp &= ~PORT_CMD_START;
writel(tmp, port_mmio + PORT_CMD);
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index 341d0ef82cbd..30cc8f1a31e1 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -340,7 +340,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
- * 4) phys (optional)
+ * 4) phys (optional)
*
* RETURNS:
* The allocated ahci_host_priv on success, otherwise an ERR_PTR value
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3c09122bf038..7431ccd03316 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4530,6 +4530,25 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER },
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
+ /* Crucial BX100 SSD 500GB has broken LPM support */
+ { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },
+
+ /* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
+ { "Crucial_CT512MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+ /* 512GB MX100 with newer firmware has only LPM issues */
+ { "Crucial_CT512MX100*", NULL, ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+
+ /* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
+ { "Crucial_CT480M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+ { "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM |
+ ATA_HORKAGE_NOLPM, },
+
/* devices that don't properly handle queued TRIM commands */
{ "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4541,7 +4560,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
- { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ { "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ ATA_HORKAGE_ZERO_AFTER_TRIM, },
+ { "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -5401,8 +5422,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
* We guarantee to LLDs that they will have at least one
* non-zero sg if the command is a data command.
*/
- if (WARN_ON_ONCE(ata_is_data(prot) &&
- (!qc->sg || !qc->n_elem || !qc->nbytes)))
+ if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
goto sys_err;
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 11c3137d7b0a..c016829a38fd 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -815,7 +815,8 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
if (ap->pflags & ATA_PFLAG_LOADING)
ap->pflags &= ~ATA_PFLAG_LOADING;
- else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG)
+ else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
+ !(ap->flags & ATA_FLAG_SAS_HOST))
schedule_delayed_work(&ap->hotplug_task, 0);
if (ap->pflags & ATA_PFLAG_RECOVERED)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 66be961c93a4..89a9d4a2efc8 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3316,6 +3316,12 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
goto invalid_fld;
}
+ /* We may not issue NCQ commands to devices not supporting NCQ */
+ if (ata_is_ncq(tf->protocol) && !ata_ncq_enabled(dev)) {
+ fp = 1;
+ goto invalid_fld;
+ }
+
/* sanity check for pio multi commands */
if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) {
fp = 1;
@@ -4282,7 +4288,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
#ifdef ATA_DEBUG
struct scsi_device *scsidev = cmd->device;
- DPRINTK("CDB (%u:%d,%d,%d) %9ph\n",
+ DPRINTK("CDB (%u:%d,%d,%lld) %9ph\n",
ap->print_id,
scsidev->channel, scsidev->id, scsidev->lun,
cmd->cmnd);
@@ -4309,7 +4315,9 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
/* relay SCSI command to ATAPI device */
int len = COMMAND_SIZE(scsi_op);
- if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
+ if (unlikely(len > scmd->cmd_len ||
+ len > dev->cdb_len ||
+ scmd->cmd_len > ATAPI_CDB_LEN))
goto bad_cdb_len;
xlat_func = atapi_xlat;
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index 80ee2f2a50d0..6456e07db72a 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -146,6 +146,7 @@
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
+ RCAR_GEN3_SATA,
RCAR_R8A7790_ES1_SATA,
};
@@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host)
ioaddr->command_addr = ioaddr->cmd_addr + (ATA_REG_CMD << 2);
}
-static void sata_rcar_init_controller(struct ata_host *host)
+static void sata_rcar_init_module(struct sata_rcar_priv *priv)
{
- struct sata_rcar_priv *priv = host->private_data;
void __iomem *base = priv->base;
u32 val;
- /* reset and setup phy */
- switch (priv->type) {
- case RCAR_GEN1_SATA:
- sata_rcar_gen1_phy_init(priv);
- break;
- case RCAR_GEN2_SATA:
- case RCAR_R8A7790_ES1_SATA:
- sata_rcar_gen2_phy_init(priv);
- break;
- default:
- dev_warn(host->dev, "SATA phy is not initialized\n");
- break;
- }
-
/* SATA-IP reset state */
val = ioread32(base + ATAPI_CONTROL1_REG);
val |= ATAPI_CONTROL1_RESET;
@@ -824,10 +810,33 @@ static void sata_rcar_init_controller(struct ata_host *host)
/* ack and mask */
iowrite32(0, base + SATAINTSTAT_REG);
iowrite32(0x7ff, base + SATAINTMASK_REG);
+
/* enable interrupts */
iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
}
+static void sata_rcar_init_controller(struct ata_host *host)
+{
+ struct sata_rcar_priv *priv = host->private_data;
+
+ /* reset and setup phy */
+ switch (priv->type) {
+ case RCAR_GEN1_SATA:
+ sata_rcar_gen1_phy_init(priv);
+ break;
+ case RCAR_GEN2_SATA:
+ case RCAR_GEN3_SATA:
+ case RCAR_R8A7790_ES1_SATA:
+ sata_rcar_gen2_phy_init(priv);
+ break;
+ default:
+ dev_warn(host->dev, "SATA phy is not initialized\n");
+ break;
+ }
+
+ sata_rcar_init_module(priv);
+}
+
static const struct of_device_id sata_rcar_match[] = {
{
/* Deprecated by "renesas,sata-r8a7779" */
@@ -856,7 +865,7 @@ static const struct of_device_id sata_rcar_match[] = {
},
{
.compatible = "renesas,sata-r8a7795",
- .data = (void *)RCAR_GEN2_SATA
+ .data = (void *)RCAR_GEN3_SATA
},
{
.compatible = "renesas,rcar-gen2-sata",
@@ -864,7 +873,7 @@ static const struct of_device_id sata_rcar_match[] = {
},
{
.compatible = "renesas,rcar-gen3-sata",
- .data = (void *)RCAR_GEN2_SATA
+ .data = (void *)RCAR_GEN3_SATA
},
{ },
};
@@ -982,11 +991,18 @@ static int sata_rcar_resume(struct device *dev)
if (ret)
return ret;
- /* ack and mask */
- iowrite32(0, base + SATAINTSTAT_REG);
- iowrite32(0x7ff, base + SATAINTMASK_REG);
- /* enable interrupts */
- iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
+ if (priv->type == RCAR_GEN3_SATA) {
+ sata_rcar_gen2_phy_init(priv);
+ sata_rcar_init_module(priv);
+ } else {
+ /* ack and mask */
+ iowrite32(0, base + SATAINTSTAT_REG);
+ iowrite32(0x7ff, base + SATAINTMASK_REG);
+
+ /* enable interrupts */
+ iowrite32(ATAPI_INT_ENABLE_SATAINT,
+ base + ATAPI_INT_ENABLE_REG);
+ }
ata_host_resume(host);
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 09:21:50 +0000