summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig18
-rw-r--r--drivers/ata/Makefile2
-rw-r--r--drivers/ata/acard-ahci.c4
-rw-r--r--drivers/ata/ahci.c104
-rw-r--r--drivers/ata/ahci.h6
-rw-r--r--drivers/ata/ahci_brcmstb.c322
-rw-r--r--drivers/ata/ahci_ceva.c238
-rw-r--r--drivers/ata/ahci_mvebu.c22
-rw-r--r--drivers/ata/ahci_platform.c1
-rw-r--r--drivers/ata/ahci_xgene.c103
-rw-r--r--drivers/ata/libahci.c105
-rw-r--r--drivers/ata/libahci_platform.c4
-rw-r--r--drivers/ata/libata-core.c13
-rw-r--r--drivers/ata/libata-eh.c13
-rw-r--r--drivers/ata/libata-transport.c22
-rw-r--r--drivers/ata/pata_hpt366.c4
-rw-r--r--drivers/ata/pata_samsung_cf.c2
-rw-r--r--drivers/ata/sata_highbank.c3
-rw-r--r--drivers/ata/sata_nv.c2
19 files changed, 907 insertions, 81 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 9dca4b995be0..b11470a7bd8f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -98,6 +98,15 @@ config SATA_AHCI_PLATFORM
If unsure, say N.
+config AHCI_BRCMSTB
+ tristate "Broadcom STB AHCI SATA support"
+ depends on ARCH_BRCMSTB
+ help
+ This option enables support for the AHCI SATA3 controller found on
+ STB SoC's.
+
+ If unsure, say N.
+
config AHCI_DA850
tristate "DaVinci DA850 AHCI SATA support"
depends on ARCH_DAVINCI_DA850
@@ -124,6 +133,15 @@ config AHCI_IMX
If unsure, say N.
+config AHCI_CEVA
+ tristate "CEVA AHCI SATA support"
+ depends on OF
+ help
+ This option enables support for the CEVA AHCI SATA.
+ It can be found on the Xilinx Zynq UltraScale+ MPSoC.
+
+ If unsure, say N.
+
config AHCI_MVEBU
tristate "Marvell EBU AHCI SATA support"
depends on ARCH_MVEBU
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 40f7865f20a1..af70919f7dde 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,6 +10,8 @@ obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o
obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o
obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o
+obj-$(CONFIG_AHCI_BRCMSTB) += ahci_brcmstb.o libahci.o libahci_platform.o
+obj-$(CONFIG_AHCI_CEVA) += ahci_ceva.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_DA850) += ahci_da850.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_IMX) += ahci_imx.o libahci.o libahci_platform.o
obj-$(CONFIG_AHCI_MVEBU) += ahci_mvebu.o libahci.o libahci_platform.o
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 12489ce863c4..ed6a30cd681a 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -433,6 +433,8 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv)
return -ENOMEM;
+
+ hpriv->irq = pdev->irq;
hpriv->flags |= (unsigned long)pi.private_data;
if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
@@ -498,7 +500,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
acard_ahci_pci_print_info(host);
pci_set_master(pdev);
- return ahci_host_activate(host, pdev->irq, &acard_ahci_sht);
+ return ahci_host_activate(host, &acard_ahci_sht);
}
module_pci_driver(acard_ahci_pci_driver);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 65ee94454bbd..7e62751abfac 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -42,6 +42,7 @@
#include <linux/device.h>
#include <linux/dmi.h>
#include <linux/gfp.h>
+#include <linux/msi.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
@@ -52,6 +53,7 @@
enum {
AHCI_PCI_BAR_STA2X11 = 0,
+ AHCI_PCI_BAR_CAVIUM = 0,
AHCI_PCI_BAR_ENMOTUS = 2,
AHCI_PCI_BAR_STANDARD = 5,
};
@@ -1288,17 +1290,60 @@ static inline void ahci_gtf_filter_workaround(struct ata_host *host)
{}
#endif
-static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
- struct ahci_host_priv *hpriv)
+/*
+ * ahci_init_msix() only implements single MSI-X support, not multiple
+ * MSI-X per-port interrupts. This is needed for host controllers that only
+ * have MSI-X support implemented, but no MSI or intx.
+ */
+static int ahci_init_msix(struct pci_dev *pdev, unsigned int n_ports,
+ struct ahci_host_priv *hpriv)
{
int rc, nvec;
+ struct msix_entry entry = {};
+ /* Do not init MSI-X if MSI is disabled for the device */
if (hpriv->flags & AHCI_HFLAG_NO_MSI)
- goto intx;
+ return -ENODEV;
+
+ nvec = pci_msix_vec_count(pdev);
+ if (nvec < 0)
+ return nvec;
+
+ if (!nvec) {
+ rc = -ENODEV;
+ goto fail;
+ }
+
+ /*
+ * There can be more than one vector (e.g. for error detection or
+ * hdd hotplug). Only the first vector (entry.entry = 0) is used.
+ */
+ rc = pci_enable_msix_exact(pdev, &entry, 1);
+ if (rc < 0)
+ goto fail;
+
+ hpriv->irq = entry.vector;
+
+ return 1;
+fail:
+ dev_err(&pdev->dev,
+ "failed to enable MSI-X with error %d, # of vectors: %d\n",
+ rc, nvec);
+
+ return rc;
+}
+
+static int ahci_init_msi(struct pci_dev *pdev, unsigned int n_ports,
+ struct ahci_host_priv *hpriv)
+{
+ int rc, nvec;
+
+ if (hpriv->flags & AHCI_HFLAG_NO_MSI)
+ return -ENODEV;
nvec = pci_msi_vec_count(pdev);
if (nvec < 0)
- goto intx;
+ return nvec;
/*
* If number of MSIs is less than number of ports then Sharing Last
@@ -1311,8 +1356,8 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
rc = pci_enable_msi_exact(pdev, nvec);
if (rc == -ENOSPC)
goto single_msi;
- else if (rc < 0)
- goto intx;
+ if (rc < 0)
+ return rc;
/* fallback to single MSI mode if the controller enforced MRSM mode */
if (readl(hpriv->mmio + HOST_CTL) & HOST_MRSM) {
@@ -1324,15 +1369,42 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
if (nvec > 1)
hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
- return nvec;
+ goto out;
single_msi:
- if (pci_enable_msi(pdev))
- goto intx;
- return 1;
+ nvec = 1;
+
+ rc = pci_enable_msi(pdev);
+ if (rc < 0)
+ return rc;
+out:
+ hpriv->irq = pdev->irq;
+
+ return nvec;
+}
+
+static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
+ struct ahci_host_priv *hpriv)
+{
+ int nvec;
+
+ nvec = ahci_init_msi(pdev, n_ports, hpriv);
+ if (nvec >= 0)
+ return nvec;
+
+ /*
+ * Currently, MSI-X support only implements single IRQ mode and
+ * exists for controllers which can't do other types of IRQ. Only
+ * set it up if MSI fails.
+ */
+ nvec = ahci_init_msix(pdev, n_ports, hpriv);
+ if (nvec >= 0)
+ return nvec;
-intx:
+ /* lagacy intx interrupts */
pci_intx(pdev, 1);
+ hpriv->irq = pdev->irq;
+
return 0;
}
@@ -1371,11 +1443,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
dev_info(&pdev->dev,
"PDC42819 can only drive SATA devices with this driver\n");
- /* Both Connext and Enmotus devices use non-standard BARs */
+ /* Some devices use non-standard BARs */
if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
+ else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
+ ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
/*
* The JMicron chip 361/363 contains one SATA controller and one
@@ -1497,13 +1571,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
- ahci_init_interrupts(pdev, n_ports, hpriv);
-
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
if (!host)
return -ENOMEM;
host->private_data = hpriv;
+ ahci_init_interrupts(pdev, n_ports, hpriv);
+
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
@@ -1549,7 +1623,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
pci_set_master(pdev);
- return ahci_host_activate(host, pdev->irq, &ahci_sht);
+ return ahci_host_activate(host, &ahci_sht);
}
module_pci_driver(ahci_pci_driver);
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 71262e08648e..5b8e8a0fab48 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -238,6 +238,8 @@ enum {
AHCI_HFLAG_MULTI_MSI = (1 << 16), /* multiple PCI MSIs */
AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */
AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */
+ AHCI_HFLAG_EDGE_IRQ = (1 << 19), /* HOST_IRQ_STAT behaves as
+ Edge Triggered */
/* ap->flags bits */
@@ -341,6 +343,7 @@ struct ahci_host_priv {
struct phy **phys;
unsigned nports; /* Number of ports */
void *plat_data; /* Other platform data */
+ unsigned int irq; /* interrupt line */
/*
* Optional ahci_start_engine override, if not set this gets set to the
* default ahci_start_engine during ahci_save_initial_config, this can
@@ -393,8 +396,7 @@ void ahci_set_em_messages(struct ahci_host_priv *hpriv,
struct ata_port_info *pi);
int ahci_reset_em(struct ata_host *host);
void ahci_print_info(struct ata_host *host, const char *scc_s);
-int ahci_host_activate(struct ata_host *host, int irq,
- struct scsi_host_template *sht);
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht);
void ahci_error_handler(struct ata_port *ap);
static inline void __iomem *__ahci_port_base(struct ata_host *host,
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
new file mode 100644
index 000000000000..ce1e3a885981
--- /dev/null
+++ b/drivers/ata/ahci_brcmstb.c
@@ -0,0 +1,322 @@
+/*
+ * Broadcom SATA3 AHCI Controller Driver
+ *
+ * Copyright © 2009-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/compiler.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+
+#include "ahci.h"
+
+#define DRV_NAME "brcm-ahci"
+
+#define SATA_TOP_CTRL_VERSION 0x0
+#define SATA_TOP_CTRL_BUS_CTRL 0x4
+ #define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
+ #define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
+ #define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
+ #define PIODATA_ENDIAN_SHIFT 6
+ #define ENDIAN_SWAP_NONE 0
+ #define ENDIAN_SWAP_FULL 2
+ #define OVERRIDE_HWINIT BIT(16)
+#define SATA_TOP_CTRL_TP_CTRL 0x8
+#define SATA_TOP_CTRL_PHY_CTRL 0xc
+ #define SATA_TOP_CTRL_PHY_CTRL_1 0x0
+ #define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
+ #define SATA_TOP_CTRL_PHY_CTRL_2 0x4
+ #define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
+ #define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
+ #define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
+ #define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
+ #define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
+ #define SATA_TOP_CTRL_PHY_OFFS 0x8
+ #define SATA_TOP_MAX_PHYS 2
+#define SATA_TOP_CTRL_SATA_TP_OUT 0x1c
+#define SATA_TOP_CTRL_CLIENT_INIT_CTRL 0x20
+
+/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
+#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
+#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
+#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
+#else
+#define DATA_ENDIAN 0
+#define MMIO_ENDIAN 0
+#endif
+
+#define BUS_CTRL_ENDIAN_CONF \
+ ((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
+ (DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
+ (MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
+
+struct brcm_ahci_priv {
+ struct device *dev;
+ void __iomem *top_ctrl;
+ u32 port_mask;
+};
+
+static const struct ata_port_info ahci_brcm_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_platform_ops,
+};
+
+static inline u32 brcm_sata_readreg(void __iomem *addr)
+{
+ /*
+ * MIPS endianness is configured by boot strap, which also reverses all
+ * bus endianness (i.e., big-endian CPU + big endian bus ==> native
+ * endian I/O).
+ *
+ * Other architectures (e.g., ARM) either do not support big endian, or
+ * else leave I/O in little endian mode.
+ */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ return __raw_readl(addr);
+ else
+ return readl_relaxed(addr);
+}
+
+static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
+{
+ /* See brcm_sata_readreg() comments */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+ __raw_writel(val, addr);
+ else
+ writel_relaxed(val, addr);
+}
+
+static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
+{
+ void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
+ (port * SATA_TOP_CTRL_PHY_OFFS);
+ void __iomem *p;
+ u32 reg;
+
+ /* clear PHY_DEFAULT_POWER_STATE */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
+ reg = brcm_sata_readreg(p);
+ reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
+ brcm_sata_writereg(reg, p);
+
+ /* reset the PHY digital logic */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
+ reg = brcm_sata_readreg(p);
+ reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
+ SATA_TOP_CTRL_2_SW_RST_RX);
+ reg |= SATA_TOP_CTRL_2_SW_RST_TX;
+ brcm_sata_writereg(reg, p);
+ reg = brcm_sata_readreg(p);
+ reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
+ brcm_sata_writereg(reg, p);
+ reg = brcm_sata_readreg(p);
+ reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
+ brcm_sata_writereg(reg, p);
+ (void)brcm_sata_readreg(p);
+}
+
+static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
+{
+ void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
+ (port * SATA_TOP_CTRL_PHY_OFFS);
+ void __iomem *p;
+ u32 reg;
+
+ /* power-off the PHY digital logic */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
+ reg = brcm_sata_readreg(p);
+ reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
+ SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
+ SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
+ brcm_sata_writereg(reg, p);
+
+ /* set PHY_DEFAULT_POWER_STATE */
+ p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
+ reg = brcm_sata_readreg(p);
+ reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
+ brcm_sata_writereg(reg, p);
+}
+
+static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
+ if (priv->port_mask & BIT(i))
+ brcm_sata_phy_enable(priv, i);
+}
+
+static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
+ if (priv->port_mask & BIT(i))
+ brcm_sata_phy_disable(priv, i);
+}
+
+static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
+ struct brcm_ahci_priv *priv)
+{
+ void __iomem *ahci;
+ struct resource *res;
+ u32 impl;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
+ ahci = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(ahci))
+ return 0;
+
+ impl = readl(ahci + HOST_PORTS_IMPL);
+
+ if (fls(impl) > SATA_TOP_MAX_PHYS)
+ dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
+ impl);
+ else if (!impl)
+ dev_info(priv->dev, "no ports found\n");
+
+ devm_iounmap(&pdev->dev, ahci);
+ devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
+
+ return impl;
+}
+
+static void brcm_sata_init(struct brcm_ahci_priv *priv)
+{
+ /* Configure endianness */
+ brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF,
+ priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
+}
+
+static int brcm_ahci_suspend(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+ int ret;
+
+ ret = ahci_platform_suspend(dev);
+ brcm_sata_phys_disable(priv);
+ return ret;
+}
+
+static int brcm_ahci_resume(struct device *dev)
+{
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+
+ brcm_sata_init(priv);
+ brcm_sata_phys_enable(priv);
+ return ahci_platform_resume(dev);
+}
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
+static int brcm_ahci_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct brcm_ahci_priv *priv;
+ struct ahci_host_priv *hpriv;
+ struct resource *res;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ priv->dev = dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
+ priv->top_ctrl = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->top_ctrl))
+ return PTR_ERR(priv->top_ctrl);
+
+ brcm_sata_init(priv);
+
+ priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
+ if (!priv->port_mask)
+ return -ENODEV;
+
+ brcm_sata_phys_enable(priv);
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+ hpriv->plat_data = priv;
+
+ ret = ahci_platform_enable_resources(hpriv);
+ if (ret)
+ return ret;
+
+ ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
+ &ahci_platform_sht);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "Broadcom AHCI SATA3 registered\n");
+
+ return 0;
+}
+
+static int brcm_ahci_remove(struct platform_device *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct brcm_ahci_priv *priv = hpriv->plat_data;
+ int ret;
+
+ ret = ata_platform_remove_one(pdev);
+ if (ret)
+ return ret;
+
+ brcm_sata_phys_disable(priv);
+
+ return 0;
+}
+
+static const struct of_device_id ahci_of_match[] = {
+ {.compatible = "brcm,bcm7445-ahci"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ahci_of_match);
+
+static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
+
+static struct platform_driver brcm_ahci_driver = {
+ .probe = brcm_ahci_probe,
+ .remove = brcm_ahci_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ahci_of_match,
+ .pm = &ahci_brcm_pm_ops,
+ },
+};
+module_platform_driver(brcm_ahci_driver);
+
+MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
+MODULE_AUTHOR("Brian Norris");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sata-brcmstb");
diff --git a/drivers/ata/ahci_ceva.c b/drivers/ata/ahci_ceva.c
new file mode 100644
index 000000000000..207649d323c5
--- /dev/null
+++ b/drivers/ata/ahci_ceva.c
@@ -0,0 +1,238 @@
+/*
+ * Copyright (C) 2015 Xilinx, Inc.
+ * CEVA AHCI SATA platform driver
+ *
+ * based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/kernel.h>
+#include <linux/libata.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "ahci.h"
+
+/* Vendor Specific Register Offsets */
+#define AHCI_VEND_PCFG 0xA4
+#define AHCI_VEND_PPCFG 0xA8
+#define AHCI_VEND_PP2C 0xAC
+#define AHCI_VEND_PP3C 0xB0
+#define AHCI_VEND_PP4C 0xB4
+#define AHCI_VEND_PP5C 0xB8
+#define AHCI_VEND_PAXIC 0xC0
+#define AHCI_VEND_PTC 0xC8
+
+/* Vendor Specific Register bit definitions */
+#define PAXIC_ADBW_BW64 0x1
+#define PAXIC_MAWIDD (1 << 8)
+#define PAXIC_MARIDD (1 << 16)
+#define PAXIC_OTL (0x4 << 20)
+
+#define PCFG_TPSS_VAL (0x32 << 16)
+#define PCFG_TPRS_VAL (0x2 << 12)
+#define PCFG_PAD_VAL 0x2
+
+#define PPCFG_TTA 0x1FFFE
+#define PPCFG_PSSO_EN (1 << 28)
+#define PPCFG_PSS_EN (1 << 29)
+#define PPCFG_ESDF_EN (1 << 31)
+
+#define PP2C_CIBGMN 0x0F
+#define PP2C_CIBGMX (0x25 << 8)
+#define PP2C_CIBGN (0x18 << 16)
+#define PP2C_CINMP (0x29 << 24)
+
+#define PP3C_CWBGMN 0x04
+#define PP3C_CWBGMX (0x0B << 8)
+#define PP3C_CWBGN (0x08 << 16)
+#define PP3C_CWNMP (0x0F << 24)
+
+#define PP4C_BMX 0x0a
+#define PP4C_BNM (0x08 << 8)
+#define PP4C_SFD (0x4a << 16)
+#define PP4C_PTST (0x06 << 24)
+
+#define PP5C_RIT 0x60216
+#define PP5C_RCT (0x7f0 << 20)
+
+#define PTC_RX_WM_VAL 0x40
+#define PTC_RSVD (1 << 27)
+
+#define PORT0_BASE 0x100
+#define PORT1_BASE 0x180
+
+/* Port Control Register Bit Definitions */
+#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
+#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
+#define PORT_SCTL_IPM (0x3 << 8)
+
+#define PORT_BASE 0x100
+#define PORT_OFFSET 0x80
+#define NR_PORTS 2
+#define DRV_NAME "ahci-ceva"
+#define CEVA_FLAG_BROKEN_GEN2 1
+
+struct ceva_ahci_priv {
+ struct platform_device *ahci_pdev;
+ int flags;
+};
+
+static struct ata_port_operations ahci_ceva_ops = {
+ .inherits = &ahci_platform_ops,
+};
+
+static const struct ata_port_info ahci_ceva_port_info = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ceva_ops,
+};
+
+static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
+{
+ void __iomem *mmio = hpriv->mmio;
+ struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
+ u32 tmp;
+ int i;
+
+ /*
+ * AXI Data bus width to 64
+ * Set Mem Addr Read, Write ID for data transfers
+ * Transfer limit to 72 DWord
+ */
+ tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
+ writel(tmp, mmio + AHCI_VEND_PAXIC);
+
+ /* Set AHCI Enable */
+ tmp = readl(mmio + HOST_CTL);
+ tmp |= HOST_AHCI_EN;
+ writel(tmp, mmio + HOST_CTL);
+
+ for (i = 0; i < NR_PORTS; i++) {
+ /* TPSS TPRS scalars, CISE and Port Addr */
+ tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
+ writel(tmp, mmio + AHCI_VEND_PCFG);
+
+ /* Port Phy Cfg register enables */
+ tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
+ writel(tmp, mmio + AHCI_VEND_PPCFG);
+
+ /* Phy Control OOB timing parameters COMINIT */
+ tmp = PP2C_CIBGMN | PP2C_CIBGMX | PP2C_CIBGN | PP2C_CINMP;
+ writel(tmp, mmio + AHCI_VEND_PP2C);
+
+ /* Phy Control OOB timing parameters COMWAKE */
+ tmp = PP3C_CWBGMN | PP3C_CWBGMX | PP3C_CWBGN | PP3C_CWNMP;
+ writel(tmp, mmio + AHCI_VEND_PP3C);
+
+ /* Phy Control Burst timing setting */
+ tmp = PP4C_BMX | PP4C_BNM | PP4C_SFD | PP4C_PTST;
+ writel(tmp, mmio + AHCI_VEND_PP4C);
+
+ /* Rate Change Timer and Retry Interval Timer setting */
+ tmp = PP5C_RIT | PP5C_RCT;
+ writel(tmp, mmio + AHCI_VEND_PP5C);
+
+ /* Rx Watermark setting */
+ tmp = PTC_RX_WM_VAL | PTC_RSVD;
+ writel(tmp, mmio + AHCI_VEND_PTC);
+
+ /* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
+ tmp = PORT_SCTL_SPD_GEN2 | PORT_SCTL_IPM;
+ if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
+ tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
+ writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
+ }
+}
+
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
+static int ceva_ahci_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct ahci_host_priv *hpriv;
+ struct ceva_ahci_priv *cevapriv;
+ int rc;
+
+ cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
+ if (!cevapriv)
+ return -ENOMEM;
+
+ cevapriv->ahci_pdev = pdev;
+
+ hpriv = ahci_platform_get_resources(pdev);
+ if (IS_ERR(hpriv))
+ return PTR_ERR(hpriv);
+
+ rc = ahci_platform_enable_resources(hpriv);
+ if (rc)
+ return rc;
+
+ if (of_property_read_bool(np, "ceva,broken-gen2"))
+ cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
+
+ hpriv->plat_data = cevapriv;
+
+ /* CEVA specific initialization */
+ ahci_ceva_setup(hpriv);
+
+ rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
+ &ahci_platform_sht);
+ if (rc)
+ goto disable_resources;
+
+ return 0;
+
+disable_resources:
+ ahci_platform_disable_resources(hpriv);
+ return rc;
+}
+
+static int __maybe_unused ceva_ahci_suspend(struct device *dev)
+{
+ return ahci_platform_suspend_host(dev);
+}
+
+static int __maybe_unused ceva_ahci_resume(struct device *dev)
+{
+ return ahci_platform_resume_host(dev);
+}
+
+static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
+
+static const struct of_device_id ceva_ahci_of_match[] = {
+ { .compatible = "ceva,ahci-1v84" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
+
+static struct platform_driver ceva_ahci_driver = {
+ .probe = ceva_ahci_probe,
+ .remove = ata_platform_remove_one,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = ceva_ahci_of_match,
+ .pm = &ahci_ceva_pm_ops,
+ },
+};
+module_platform_driver(ceva_ahci_driver);
+
+MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
index 5928d0746a27..8490d37aee2a 100644
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -62,6 +62,26 @@ static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv)
writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
}
+static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ return ahci_platform_suspend_host(&pdev->dev);
+}
+
+static int ahci_mvebu_resume(struct platform_device *pdev)
+{
+ struct ata_host *host = platform_get_drvdata(pdev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ const struct mbus_dram_target_info *dram;
+
+ dram = mv_mbus_dram_info();
+ if (dram)
+ ahci_mvebu_mbus_config(hpriv, dram);
+
+ ahci_mvebu_regret_option(hpriv);
+
+ return ahci_platform_resume_host(&pdev->dev);
+}
+
static const struct ata_port_info ahci_mvebu_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
@@ -120,6 +140,8 @@ MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match);
static struct platform_driver ahci_mvebu_driver = {
.probe = ahci_mvebu_probe,
.remove = ata_platform_remove_one,
+ .suspend = ahci_mvebu_suspend,
+ .resume = ahci_mvebu_resume,
.driver = {
.name = DRV_NAME,
.of_match_table = ahci_mvebu_of_match,
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 78d6ae0b90c4..614c78f510f0 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -74,6 +74,7 @@ static const struct of_device_id ahci_of_match[] = {
{ .compatible = "ibm,476gtr-ahci", },
{ .compatible = "snps,dwc-ahci", },
{ .compatible = "hisilicon,hisi-ahci", },
+ { .compatible = "fsl,qoriq-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index 2b78510d94dd..e2c6d9e0c5ac 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -27,6 +27,7 @@
#include <linux/platform_device.h>
#include <linux/ahci_platform.h>
#include <linux/of_address.h>
+#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/phy/phy.h>
#include "ahci.h"
@@ -84,6 +85,11 @@
/* Max retry for link down */
#define MAX_LINK_DOWN_RETRY 3
+enum xgene_ahci_version {
+ XGENE_AHCI_V1 = 1,
+ XGENE_AHCI_V2,
+};
+
struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
@@ -542,7 +548,7 @@ softreset_retry:
return rc;
}
-static struct ata_port_operations xgene_ahci_ops = {
+static struct ata_port_operations xgene_ahci_v1_ops = {
.inherits = &ahci_ops,
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
@@ -552,11 +558,25 @@ static struct ata_port_operations xgene_ahci_ops = {
.pmp_softreset = xgene_ahci_pmp_softreset
};
-static const struct ata_port_info xgene_ahci_port_info = {
+static const struct ata_port_info xgene_ahci_v1_port_info = {
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &xgene_ahci_v1_ops,
+};
+
+static struct ata_port_operations xgene_ahci_v2_ops = {
+ .inherits = &ahci_ops,
+ .host_stop = xgene_ahci_host_stop,
+ .hardreset = xgene_ahci_hardreset,
+ .read_id = xgene_ahci_read_id,
+};
+
+static const struct ata_port_info xgene_ahci_v2_port_info = {
.flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
- .port_ops = &xgene_ahci_ops,
+ .port_ops = &xgene_ahci_v2_ops,
};
static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv)
@@ -629,12 +649,32 @@ static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT(DRV_NAME),
};
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xgene_ahci_acpi_match[] = {
+ { "APMC0D0D", XGENE_AHCI_V1},
+ { "APMC0D32", XGENE_AHCI_V2},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
+#endif
+
+static const struct of_device_id xgene_ahci_of_match[] = {
+ {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1},
+ {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2},
+ {},
+};
+MODULE_DEVICE_TABLE(of, xgene_ahci_of_match);
+
static int xgene_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
struct xgene_ahci_context *ctx;
struct resource *res;
+ const struct of_device_id *of_devid;
+ enum xgene_ahci_version version = XGENE_AHCI_V1;
+ const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info,
+ &xgene_ahci_v2_port_info };
int rc;
hpriv = ahci_platform_get_resources(pdev);
@@ -677,6 +717,35 @@ static int xgene_ahci_probe(struct platform_device *pdev)
ctx->csr_mux = csr;
}
+ of_devid = of_match_device(xgene_ahci_of_match, dev);
+ if (of_devid) {
+ if (of_devid->data)
+ version = (enum xgene_ahci_version) of_devid->data;
+ }
+#ifdef CONFIG_ACPI
+ else {
+ const struct acpi_device_id *acpi_id;
+ struct acpi_device_info *info;
+ acpi_status status;
+
+ acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev);
+ if (!acpi_id) {
+ dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n");
+ version = XGENE_AHCI_V1;
+ } else if (acpi_id->driver_data) {
+ version = (enum xgene_ahci_version) acpi_id->driver_data;
+ status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info);
+ if (ACPI_FAILURE(status)) {
+ dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n",
+ __func__);
+ version = XGENE_AHCI_V1;
+ }
+ if (info->valid & ACPI_VALID_CID)
+ version = XGENE_AHCI_V2;
+ }
+ }
+#endif
+
dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core,
hpriv->mmio);
@@ -704,9 +773,19 @@ static int xgene_ahci_probe(struct platform_device *pdev)
/* Configure the host controller */
xgene_ahci_hw_init(hpriv);
skip_clk_phy:
- hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
- rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info,
+ switch (version) {
+ case XGENE_AHCI_V1:
+ hpriv->flags = AHCI_HFLAG_NO_NCQ;
+ break;
+ case XGENE_AHCI_V2:
+ hpriv->flags |= AHCI_HFLAG_YES_FBS | AHCI_HFLAG_EDGE_IRQ;
+ break;
+ default:
+ break;
+ }
+
+ rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1],
&ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -719,20 +798,6 @@ disable_resources:
return rc;
}
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id xgene_ahci_acpi_match[] = {
- { "APMC0D0D", },
- { }
-};
-MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match);
-#endif
-
-static const struct of_device_id xgene_ahci_of_match[] = {
- {.compatible = "apm,xgene-ahci"},
- {},
-};
-MODULE_DEVICE_TABLE(of, xgene_ahci_of_match);
-
static struct platform_driver xgene_ahci_driver = {
.probe = xgene_ahci_probe,
.remove = ata_platform_remove_one,
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 287c4ba0219f..d256a66158be 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1825,11 +1825,38 @@ static irqreturn_t ahci_multi_irqs_intr(int irq, void *dev_instance)
return IRQ_WAKE_THREAD;
}
-static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
+static u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked)
+{
+ unsigned int i, handled = 0;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap;
+
+ if (!(irq_masked & (1 << i)))
+ continue;
+
+ ap = host->ports[i];
+ if (ap) {
+ ahci_port_intr(ap);
+ VPRINTK("port %u\n", i);
+ } else {
+ VPRINTK("port %u (no irq)\n", i);
+ if (ata_ratelimit())
+ dev_warn(host->dev,
+ "interrupt on disabled port %u\n", i);
+ }
+
+ handled = 1;
+ }
+
+ return handled;
+}
+
+static irqreturn_t ahci_single_edge_irq_intr(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
struct ahci_host_priv *hpriv;
- unsigned int i, handled = 0;
+ unsigned int rc = 0;
void __iomem *mmio;
u32 irq_stat, irq_masked;
@@ -1847,25 +1874,44 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
spin_lock(&host->lock);
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
+ /*
+ * HOST_IRQ_STAT behaves as edge triggered latch meaning that
+ * it should be cleared before all the port events are cleared.
+ */
+ writel(irq_stat, mmio + HOST_IRQ_STAT);
- if (!(irq_masked & (1 << i)))
- continue;
+ rc = ahci_handle_port_intr(host, irq_masked);
- ap = host->ports[i];
- if (ap) {
- ahci_port_intr(ap);
- VPRINTK("port %u\n", i);
- } else {
- VPRINTK("port %u (no irq)\n", i);
- if (ata_ratelimit())
- dev_warn(host->dev,
- "interrupt on disabled port %u\n", i);
- }
+ spin_unlock(&host->lock);
- handled = 1;
- }
+ VPRINTK("EXIT\n");
+
+ return IRQ_RETVAL(rc);
+}
+
+static irqreturn_t ahci_single_level_irq_intr(int irq, void *dev_instance)
+{
+ struct ata_host *host = dev_instance;
+ struct ahci_host_priv *hpriv;
+ unsigned int rc = 0;
+ void __iomem *mmio;
+ u32 irq_stat, irq_masked;
+
+ VPRINTK("ENTER\n");
+
+ hpriv = host->private_data;
+ mmio = hpriv->mmio;
+
+ /* sigh. 0xffffffff is a valid return from h/w */
+ irq_stat = readl(mmio + HOST_IRQ_STAT);
+ if (!irq_stat)
+ return IRQ_NONE;
+
+ irq_masked = irq_stat & hpriv->port_map;
+
+ spin_lock(&host->lock);
+
+ rc = ahci_handle_port_intr(host, irq_masked);
/* HOST_IRQ_STAT behaves as level triggered latch meaning that
* it should be cleared after all the port events are cleared;
@@ -1882,7 +1928,7 @@ static irqreturn_t ahci_single_irq_intr(int irq, void *dev_instance)
VPRINTK("EXIT\n");
- return IRQ_RETVAL(handled);
+ return IRQ_RETVAL(rc);
}
unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
@@ -2297,7 +2343,7 @@ static int ahci_port_start(struct ata_port *ap)
/*
* Switch to per-port locking in case each port has its own MSI vector.
*/
- if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
+ if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
spin_lock_init(&pp->lock);
ap->lock = &pp->lock;
}
@@ -2425,7 +2471,10 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host, int irq,
rc = ata_host_start(host);
if (rc)
return rc;
-
+ /*
+ * Requests IRQs according to AHCI-1.1 when multiple MSIs were
+ * allocated. That is one MSI per port, starting from @irq.
+ */
for (i = 0; i < host->n_ports; i++) {
struct ahci_port_priv *pp = host->ports[i]->private_data;
@@ -2464,29 +2513,27 @@ out_free_irqs:
/**
* ahci_host_activate - start AHCI host, request IRQs and register it
* @host: target ATA host
- * @irq: base IRQ number to request
* @sht: scsi_host_template to use when registering the host
*
- * Similar to ata_host_activate, but requests IRQs according to AHCI-1.1
- * when multiple MSIs were allocated. That is one MSI per port, starting
- * from @irq.
- *
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ahci_host_activate(struct ata_host *host, int irq,
- struct scsi_host_template *sht)
+int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
{
struct ahci_host_priv *hpriv = host->private_data;
+ int irq = hpriv->irq;
int rc;
if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
rc = ahci_host_activate_multi_irqs(host, irq, sht);
+ else if (hpriv->flags & AHCI_HFLAG_EDGE_IRQ)
+ rc = ata_host_activate(host, irq, ahci_single_edge_irq_intr,
+ IRQF_SHARED, sht);
else
- rc = ata_host_activate(host, irq, ahci_single_irq_intr,
+ rc = ata_host_activate(host, irq, ahci_single_level_irq_intr,
IRQF_SHARED, sht);
return rc;
}
diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
index d89305d289f6..aaa761b9081c 100644
--- a/drivers/ata/libahci_platform.c
+++ b/drivers/ata/libahci_platform.c
@@ -518,6 +518,8 @@ int ahci_platform_init_host(struct platform_device *pdev,
return -EINVAL;
}
+ hpriv->irq = irq;
+
/* prepare host */
pi.private_data = (void *)(unsigned long)hpriv->flags;
@@ -588,7 +590,7 @@ int ahci_platform_init_host(struct platform_device *pdev,
ahci_init_controller(host);
ahci_print_info(host, "platform");
- return ahci_host_activate(host, irq, sht);
+ return ahci_host_activate(host, sht);
}
EXPORT_SYMBOL_GPL(ahci_platform_init_host);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 577849c6611a..e83fc3d0da9c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3654,7 +3654,7 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
* EH context.
*
* RETURNS:
- * 0 on succes, -errno otherwise.
+ * 0 on success, -errno otherwise.
*/
int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy,
bool spm_wakeup)
@@ -4225,7 +4225,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },
/* devices that don't properly handle queued TRIM commands */
- { "Micron_M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
+ { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
{ "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |
ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -6456,12 +6456,7 @@ static int __init ata_parse_force_one(char **cur,
struct ata_force_ent *force_ent,
const char **reason)
{
- /* FIXME: Currently, there's no way to tag init const data and
- * using __initdata causes build failure on some versions of
- * gcc. Once __initdataconst is implemented, add const to the
- * following structure.
- */
- static struct ata_force_param force_tbl[] __initdata = {
+ static const struct ata_force_param force_tbl[] __initconst = {
{ "40c", .cbl = ATA_CBL_PATA40 },
{ "80c", .cbl = ATA_CBL_PATA80 },
{ "short40c", .cbl = ATA_CBL_PATA40_SHORT },
@@ -6472,6 +6467,8 @@ static int __init ata_parse_force_one(char **cur,
{ "3.0Gbps", .spd_limit = 2 },
{ "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
{ "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
+ { "noncqtrim", .horkage_on = ATA_HORKAGE_NO_NCQ_TRIM },
+ { "ncqtrim", .horkage_off = ATA_HORKAGE_NO_NCQ_TRIM },
{ "dump_id", .horkage_on = ATA_HORKAGE_DUMP_ID },
{ "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
{ "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index cf0022ec07f2..7465031a893c 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1507,16 +1507,21 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
{
struct ata_taskfile tf;
unsigned int err_mask;
+ bool dma = false;
DPRINTK("read log page - log 0x%x, page 0x%x\n", log, page);
+retry:
ata_tf_init(dev, &tf);
- if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id)) {
+ if (dev->dma_mode && ata_id_has_read_log_dma_ext(dev->id) &&
+ !(dev->horkage & ATA_HORKAGE_NO_NCQ_LOG)) {
tf.command = ATA_CMD_READ_LOG_DMA_EXT;
tf.protocol = ATA_PROT_DMA;
+ dma = true;
} else {
tf.command = ATA_CMD_READ_LOG_EXT;
tf.protocol = ATA_PROT_PIO;
+ dma = false;
}
tf.lbal = log;
tf.lbam = page;
@@ -1527,6 +1532,12 @@ unsigned int ata_read_log_page(struct ata_device *dev, u8 log,
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
buf, sectors * ATA_SECT_SIZE, 0);
+ if (err_mask && dma) {
+ dev->horkage |= ATA_HORKAGE_NO_NCQ_LOG;
+ ata_dev_warn(dev, "READ LOG DMA EXT failed, trying unqueued\n");
+ goto retry;
+ }
+
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
}
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index 3227b7c8a05f..d6c37bcd416d 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -560,6 +560,27 @@ show_ata_dev_gscr(struct device *dev,
static DEVICE_ATTR(gscr, S_IRUGO, show_ata_dev_gscr, NULL);
+static ssize_t
+show_ata_dev_trim(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct ata_device *ata_dev = transport_class_to_dev(dev);
+ unsigned char *mode;
+
+ if (!ata_id_has_trim(ata_dev->id))
+ mode = "unsupported";
+ else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM)
+ mode = "forced_unqueued";
+ else if (ata_fpdma_dsm_supported(ata_dev))
+ mode = "queued";
+ else
+ mode = "unqueued";
+
+ return snprintf(buf, 20, "%s\n", mode);
+}
+
+static DEVICE_ATTR(trim, S_IRUGO, show_ata_dev_trim, NULL);
+
static DECLARE_TRANSPORT_CLASS(ata_dev_class,
"ata_device", NULL, NULL, NULL);
@@ -733,6 +754,7 @@ struct scsi_transport_template *ata_attach_transport(void)
SETUP_DEV_ATTRIBUTE(ering);
SETUP_DEV_ATTRIBUTE(id);
SETUP_DEV_ATTRIBUTE(gscr);
+ SETUP_DEV_ATTRIBUTE(trim);
BUG_ON(count > ATA_DEV_ATTRS);
i->dev_attrs[count] = NULL;
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index cbc3de793d1d..0038dc4c06c7 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -352,7 +352,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info_hpt366, NULL };
- void *hpriv = NULL;
+ const void *hpriv = NULL;
u32 reg1;
int rc;
@@ -383,7 +383,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
break;
}
/* Now kick off ATA set up */
- return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
+ return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, (void *)hpriv, 0);
}
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
index fa44eb2872db..cbb5a471eb9d 100644
--- a/drivers/ata/pata_samsung_cf.c
+++ b/drivers/ata/pata_samsung_cf.c
@@ -638,7 +638,7 @@ static const struct dev_pm_ops pata_s3c_pm_ops = {
#endif
/* driver device registration */
-static struct platform_device_id pata_s3c_driver_ids[] = {
+static const struct platform_device_id pata_s3c_driver_ids[] = {
{
.name = "s3c64xx-pata",
.driver_data = TYPE_S3C64XX,
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index 24e311fe2c1c..8638d575b2b9 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -499,6 +499,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
return -ENOMEM;
}
+ hpriv->irq = irq;
hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
@@ -568,7 +569,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
ahci_init_controller(host);
ahci_print_info(host, "platform");
- rc = ahci_host_activate(host, irq, &ahci_highbank_platform_sht);
+ rc = ahci_host_activate(host, &ahci_highbank_platform_sht);
if (rc)
goto err0;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 7ece85f43020..734f563b8d37 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -599,7 +599,7 @@ MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
MODULE_VERSION(DRV_VERSION);
static bool adma_enabled;
-static bool swncq_enabled = 1;
+static bool swncq_enabled = true;
static bool msi_enabled;
static void nv_adma_register_mode(struct ata_port *ap)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 01:32:13 +0000