summaryrefslogtreecommitdiffstats
path: root/drivers/ata/sata_svw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/sata_svw.c')
-rw-r--r--drivers/ata/sata_svw.c83
1 files changed, 40 insertions, 43 deletions
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 9c48b418ad7f..5ce4f593687d 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -135,31 +135,31 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
if (tf->ctl != ap->last_ctl) {
- writeb(tf->ctl, (void __iomem *) ioaddr->ctl_addr);
+ writeb(tf->ctl, ioaddr->ctl_addr);
ap->last_ctl = tf->ctl;
ata_wait_idle(ap);
}
if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
writew(tf->feature | (((u16)tf->hob_feature) << 8),
- (void __iomem *) ioaddr->feature_addr);
+ ioaddr->feature_addr);
writew(tf->nsect | (((u16)tf->hob_nsect) << 8),
- (void __iomem *) ioaddr->nsect_addr);
+ ioaddr->nsect_addr);
writew(tf->lbal | (((u16)tf->hob_lbal) << 8),
- (void __iomem *) ioaddr->lbal_addr);
+ ioaddr->lbal_addr);
writew(tf->lbam | (((u16)tf->hob_lbam) << 8),
- (void __iomem *) ioaddr->lbam_addr);
+ ioaddr->lbam_addr);
writew(tf->lbah | (((u16)tf->hob_lbah) << 8),
- (void __iomem *) ioaddr->lbah_addr);
+ ioaddr->lbah_addr);
} else if (is_addr) {
- writew(tf->feature, (void __iomem *) ioaddr->feature_addr);
- writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr);
- writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr);
- writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr);
- writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr);
+ writew(tf->feature, ioaddr->feature_addr);
+ writew(tf->nsect, ioaddr->nsect_addr);
+ writew(tf->lbal, ioaddr->lbal_addr);
+ writew(tf->lbam, ioaddr->lbam_addr);
+ writew(tf->lbah, ioaddr->lbah_addr);
}
if (tf->flags & ATA_TFLAG_DEVICE)
- writeb(tf->device, (void __iomem *) ioaddr->device_addr);
+ writeb(tf->device, ioaddr->device_addr);
ata_wait_idle(ap);
}
@@ -171,12 +171,12 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
u16 nsect, lbal, lbam, lbah, feature;
tf->command = k2_stat_check_status(ap);
- tf->device = readw((void __iomem *)ioaddr->device_addr);
- feature = readw((void __iomem *)ioaddr->error_addr);
- nsect = readw((void __iomem *)ioaddr->nsect_addr);
- lbal = readw((void __iomem *)ioaddr->lbal_addr);
- lbam = readw((void __iomem *)ioaddr->lbam_addr);
- lbah = readw((void __iomem *)ioaddr->lbah_addr);
+ tf->device = readw(ioaddr->device_addr);
+ feature = readw(ioaddr->error_addr);
+ nsect = readw(ioaddr->nsect_addr);
+ lbal = readw(ioaddr->lbal_addr);
+ lbam = readw(ioaddr->lbam_addr);
+ lbah = readw(ioaddr->lbah_addr);
tf->feature = feature;
tf->nsect = nsect;
@@ -349,7 +349,7 @@ static const struct ata_port_operations k2_sata_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .data_xfer = ata_mmio_data_xfer,
+ .data_xfer = ata_data_xfer,
.freeze = ata_bmdma_freeze,
.thaw = ata_bmdma_thaw,
.error_handler = ata_bmdma_error_handler,
@@ -361,7 +361,7 @@ static const struct ata_port_operations k2_sata_ops = {
.port_start = ata_port_start,
};
-static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base)
+static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base)
{
port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET;
port->data_addr = base + K2_SATA_TF_DATA_OFFSET;
@@ -386,7 +386,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
static int printed_version;
struct device *dev = &pdev->dev;
struct ata_probe_ent *probe_ent;
- unsigned long base;
void __iomem *mmio_base;
const struct k2_board_info *board_info =
&k2_board_info[ent->driver_data];
@@ -410,12 +409,12 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
if (pci_resource_len(pdev, 5) == 0)
return -ENODEV;
- /* Request PCI regions */
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc) {
+ /* Request and iomap PCI regions */
+ rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+ if (rc == -EBUSY)
pcim_pin_device(pdev);
+ if (rc)
return rc;
- }
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -431,22 +430,6 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
- mmio_base = pcim_iomap(pdev, 5, 0);
- if (mmio_base == NULL)
- return -ENOMEM;
- base = (unsigned long) mmio_base;
-
- /* Clear a magic bit in SCR1 according to Darwin, those help
- * some funky seagate drives (though so far, those were already
- * set by the firmware on the machines I had access to)
- */
- writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
- mmio_base + K2_SATA_SICR1_OFFSET);
-
- /* Clear SATA error & interrupts we don't use */
- writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
- writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
-
probe_ent->sht = &k2_sata_sht;
probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | board_info->port_flags;
@@ -454,7 +437,7 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
probe_ent->n_ports = 4;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->mmio_base = mmio_base;
+ probe_ent->iomap = pcim_iomap_table(pdev);
/* We don't care much about the PIO/UDMA masks, but the core won't like us
* if we don't fill these
@@ -463,11 +446,25 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
probe_ent->mwdma_mask = 0x7;
probe_ent->udma_mask = 0x7f;
+ mmio_base = probe_ent->iomap[5];
+
/* different controllers have different number of ports - currently 4 or 8 */
/* All ports are on the same function. Multi-function device is no
* longer available. This should not be seen in any system. */
for (i = 0; i < board_info->n_ports; i++)
- k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET);
+ k2_sata_setup_port(&probe_ent->port[i],
+ mmio_base + i * K2_SATA_PORT_OFFSET);
+
+ /* Clear a magic bit in SCR1 according to Darwin, those help
+ * some funky seagate drives (though so far, those were already
+ * set by the firmware on the machines I had access to)
+ */
+ writel(readl(mmio_base + K2_SATA_SICR1_OFFSET) & ~0x00040000,
+ mmio_base + K2_SATA_SICR1_OFFSET);
+
+ /* Clear SATA error & interrupts we don't use */
+ writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET);
+ writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
pci_set_master(pdev);