summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_it8172.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_it8172.c')
-rw-r--r--drivers/ata/pata_it8172.c288
1 files changed, 288 insertions, 0 deletions
diff --git a/drivers/ata/pata_it8172.c b/drivers/ata/pata_it8172.c
new file mode 100644
index 000000000000..f8367191fc7b
--- /dev/null
+++ b/drivers/ata/pata_it8172.c
@@ -0,0 +1,288 @@
+/*
+ * pata_it8172.c - IT8172 PATA for new ATA layer
+ * (C) 2005 Red Hat Inc
+ * Alan Cox <alan@redhat.com>
+ *
+ * Based heavily on
+ *
+ * BRIEF MODULE DESCRIPTION
+ * IT8172 IDE controller support
+ *
+ * Copyright 2000 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ * stevel@mvista.com or source@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * TODO
+ * Check for errata
+ * See if we really need to force native mode
+ * PIO timings (also lacking in original)
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_it8172"
+#define DRV_VERSION "0.3.1"
+
+static int it8172_pre_reset(struct ata_port *ap)
+{
+ static const struct pci_bits it8172_enable_bits[] = {
+ { 0x00, 0, 0x00, 0x00 },
+ { 0x40, 1, 0x00, 0x01 }
+ };
+
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) {
+ ata_port_disable(ap);
+ printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ return 0;
+ }
+ ap->cbl = ATA_CBL_PATA40;
+ return ata_std_prereset(ap);
+}
+
+static void it8172_error_handler(struct ata_port *ap)
+{
+ ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+}
+
+/**
+ * it8172_set_pio_timing - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called by both the pio and dma setup functions to set the controller
+ * timings for PIO transfers. We must load both the mode number and
+ * timing values into the controller.
+ */
+
+static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ u16 reg40;
+
+ pci_read_config_word(pdev, 0x40, &reg40);
+
+ /*
+ * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
+ * are being left at the default values of 8 PCI clocks (242 nsec
+ * for a 33 MHz clock). These can be safely shortened at higher
+ * PIO modes. The DIOR/DIOW pulse width and recovery times only
+ * apply to PIO modes, not to the DMA modes.
+ */
+
+ /*
+ * Enable port 0x44. The IT8172G spec is confused; it calls
+ * this register the "Slave IDE Timing Register", but in fact,
+ * it controls timing for both master and slave drives.
+ */
+
+ reg40 |= 0x4000;
+ if (adev->devno) {
+ reg40 &= 0xC006;
+ if (pio > 1)
+ /* Enable prefetch and IORDY sample-point */
+ reg40 |= 0x0060;
+ } else {
+ reg40 &= 0xC060;
+ if (pio > 1)
+ /* Enable prefetch and IORDY sample-point */
+ reg40 |= 0x0006;
+ }
+ /* Write back the enables */
+ pci_write_config_word(pdev, 0x40, reg40);
+}
+
+/**
+ * it8172_set_piomode - set initial PIO mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the PIO mode setup. We use a shared helper for this
+ * as the DMA setup must also adjust the PIO timing information.
+ */
+
+static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
+/**
+ * it8172_set_dmamode - set initial DMA mode data
+ * @ap: ATA interface
+ * @adev: ATA device
+ *
+ * Called to do the DMA mode setup. We must tune an appropriate PIO
+ * mode to match.
+ */
+
+static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int dn = (2 * ap->port_no) + adev->devno;
+ u8 reg48, reg4a;
+ int pio;
+
+ static const int pio_map[] = { 1, 3, 4};
+ /*
+ * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
+ * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
+ * transfers on some drives, even though both numbers meet the minimum
+ * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
+ * So the faster times are just commented out here. The good news is
+ * that the slower cycle time has very little affect on transfer
+ * performance.
+ */
+
+ pci_read_config_byte(pdev, 0x48, &reg48);
+ pci_read_config_byte(pdev, 0x4A, &reg4a);
+
+ reg4a &= ~(3 << (4 * dn));
+
+ if (adev->dma_mode >= XFER_UDMA_0) {
+ reg48 |= 1 << dn;
+#ifdef UDMA_TIMING_SET
+ reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn));
+#endif
+ pio = 4;
+ } else {
+ pio = pio_map[adev->dma_mode - XFER_MW_DMA_0];
+ reg48 &= ~ (1 << dn);
+ }
+ pci_write_config_byte(pdev, 0x48, reg48);
+ pci_write_config_byte(pdev, 0x4A, reg4a);
+ it8172_set_pio_timing(ap, adev, pio);
+
+}
+
+static struct scsi_host_template it8172_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct ata_port_operations it8172_port_ops = {
+ .port_disable = ata_port_disable,
+ .set_piomode = it8172_set_piomode,
+ .set_dmamode = it8172_set_dmamode,
+ .mode_filter = ata_pci_default_filter,
+
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .check_status = ata_check_status,
+ .exec_command = ata_exec_command,
+ .dev_select = ata_std_dev_select,
+
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = it8172_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .data_xfer = ata_pio_data_xfer,
+
+ .irq_handler = ata_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = ata_host_stop
+};
+
+static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ static struct ata_port_info info = {
+ .sht = &it8172_sht,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .pio_mask = 0x1f,
+ .mwdma_mask = 0x06, /* No MWDMA0 support */
+ .udma_mask = 0x7,
+ .port_ops = &it8172_port_ops
+ };
+ static struct ata_port_info *port_info[2] = { &info, &info };
+
+ if ((!(PCI_FUNC(dev->devfn) & 1) ||
+ (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
+ return -ENODEV; /* IT8172 is more than an IDE controller */
+
+ return ata_pci_init_one(dev, port_info, 2);
+}
+
+static struct pci_device_id it8172[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), },
+ { 0, },
+};
+
+static struct pci_driver it8172_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = it8172,
+ .probe = it8172_init_one,
+ .remove = ata_pci_remove_one
+};
+
+static int __init it8172_init(void)
+{
+ return pci_register_driver(&it8172_pci_driver);
+}
+
+
+static void __exit it8172_exit(void)
+{
+ pci_unregister_driver(&it8172_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for ITE IT8172");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, it8172);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(it8172_init);
+module_exit(it8172_exit);