summaryrefslogtreecommitdiffstats
path: root/drivers/ata/libata-scsi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/libata-scsi.c')
-rw-r--r--drivers/ata/libata-scsi.c51
1 files changed, 39 insertions, 12 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 14daf4848f09..c02c490122dc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -517,7 +517,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
qc->scsicmd = cmd;
qc->scsidone = done;
- qc->__sg = scsi_sglist(cmd);
+ qc->sg = scsi_sglist(cmd);
qc->n_elem = scsi_sg_count(cmd);
} else {
cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1);
@@ -839,7 +839,14 @@ static void ata_scsi_dev_config(struct scsi_device *sdev,
if (dev->class == ATA_DEV_ATAPI) {
struct request_queue *q = sdev->request_queue;
blk_queue_max_hw_segments(q, q->max_hw_segments - 1);
- }
+
+ /* set the min alignment */
+ blk_queue_update_dma_alignment(sdev->request_queue,
+ ATA_DMA_PAD_SZ - 1);
+ } else
+ /* ATA devices must be sector aligned */
+ blk_queue_update_dma_alignment(sdev->request_queue,
+ ATA_SECT_SIZE - 1);
if (dev->class == ATA_DEV_ATA)
sdev->manage_start_stop = 1;
@@ -878,7 +885,7 @@ int ata_scsi_slave_config(struct scsi_device *sdev)
if (dev)
ata_scsi_dev_config(sdev, dev);
- return 0; /* scsi layer doesn't check return value, sigh */
+ return 0;
}
/**
@@ -2210,7 +2217,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
/* sector size */
ATA_SCSI_RBUF_SET(6, ATA_SECT_SIZE >> 8);
- ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE);
+ ATA_SCSI_RBUF_SET(7, ATA_SECT_SIZE & 0xff);
} else {
/* sector count, 64-bit */
ATA_SCSI_RBUF_SET(0, last_lba >> (8 * 7));
@@ -2224,7 +2231,7 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf,
/* sector size */
ATA_SCSI_RBUF_SET(10, ATA_SECT_SIZE >> 8);
- ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE);
+ ATA_SCSI_RBUF_SET(11, ATA_SECT_SIZE & 0xff);
}
return 0;
@@ -2331,7 +2338,7 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
DPRINTK("ATAPI request sense\n");
/* FIXME: is this needed? */
- memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
ap->ops->tf_read(ap, &qc->tf);
@@ -2341,7 +2348,9 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
ata_qc_reinit(qc);
- ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
+ /* setup sg table and init transfer direction */
+ sg_init_one(&qc->sgent, cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
+ ata_sg_init(qc, &qc->sgent, 1);
qc->dma_dir = DMA_FROM_DEVICE;
memset(&qc->cdb, 0, qc->dev->cdb_len);
@@ -2352,10 +2361,10 @@ static void atapi_request_sense(struct ata_queued_cmd *qc)
qc->tf.command = ATA_CMD_PACKET;
if (ata_pio_use_silly(ap)) {
- qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
} else {
- qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.protocol = ATAPI_PROT_PIO;
qc->tf.lbam = SCSI_SENSE_BUFFERSIZE;
qc->tf.lbah = 0;
}
@@ -2526,12 +2535,12 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc)
if (using_pio || nodata) {
/* no data, or PIO data xfer */
if (nodata)
- qc->tf.protocol = ATA_PROT_ATAPI_NODATA;
+ qc->tf.protocol = ATAPI_PROT_NODATA;
else
- qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.protocol = ATAPI_PROT_PIO;
} else {
/* DMA data xfer */
- qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.protocol = ATAPI_PROT_DMA;
qc->tf.feature |= ATAPI_PKT_DMA;
if (atapi_dmadir && (scmd->sc_data_direction != DMA_TO_DEVICE))
@@ -2690,6 +2699,24 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
if ((tf->protocol = ata_scsi_map_proto(cdb[1])) == ATA_PROT_UNKNOWN)
goto invalid_fld;
+ /*
+ * Filter TPM commands by default. These provide an
+ * essentially uncontrolled encrypted "back door" between
+ * applications and the disk. Set libata.allow_tpm=1 if you
+ * have a real reason for wanting to use them. This ensures
+ * that installed software cannot easily mess stuff up without
+ * user intent. DVR type users will probably ship with this enabled
+ * for movie content management.
+ *
+ * Note that for ATA8 we can issue a DCS change and DCS freeze lock
+ * for this and should do in future but that it is not sufficient as
+ * DCS is an optional feature set. Thus we also do the software filter
+ * so that we comply with the TC consortium stated goal that the user
+ * can turn off TC features of their system.
+ */
+ if (tf->command >= 0x5C && tf->command <= 0x5F && !libata_allow_tpm)
+ goto invalid_fld;
+
/* We may not issue DMA commands if no DMA mode is set */
if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0)
goto invalid_fld;