diff options
Diffstat (limited to 'drivers/ata/libata-core.c')
| -rw-r--r-- | drivers/ata/libata-core.c | 536 |
1 files changed, 426 insertions, 110 deletions
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index b5f2da6ac80e..8816e30fb7a4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -199,7 +199,8 @@ static const u8 ata_rw_cmds[] = { /** * ata_rwcmd_protocol - set taskfile r/w commands and protocol - * @qc: command to examine and configure + * @tf: command to examine and configure + * @dev: device tf belongs to * * Examine the device configuration and tf->flags to calculate * the proper read/write commands and protocol to use. @@ -207,10 +208,8 @@ static const u8 ata_rw_cmds[] = { * LOCKING: * caller. */ -int ata_rwcmd_protocol(struct ata_queued_cmd *qc) +static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev) { - struct ata_taskfile *tf = &qc->tf; - struct ata_device *dev = qc->dev; u8 cmd; int index, fua, lba48, write; @@ -222,7 +221,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) if (dev->flags & ATA_DFLAG_PIO) { tf->protocol = ATA_PROT_PIO; index = dev->multi_count ? 0 : 8; - } else if (lba48 && (qc->ap->flags & ATA_FLAG_PIO_LBA48)) { + } else if (lba48 && (dev->ap->flags & ATA_FLAG_PIO_LBA48)) { /* Unable to use DMA due to host limitation */ tf->protocol = ATA_PROT_PIO; index = dev->multi_count ? 0 : 8; @@ -240,6 +239,174 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) } /** + * ata_tf_read_block - Read block address from ATA taskfile + * @tf: ATA taskfile of interest + * @dev: ATA device @tf belongs to + * + * LOCKING: + * None. + * + * Read block address from @tf. This function can handle all + * three address formats - LBA, LBA48 and CHS. tf->protocol and + * flags select the address format to use. + * + * RETURNS: + * Block address read from @tf. + */ +u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev) +{ + u64 block = 0; + + if (tf->flags & ATA_TFLAG_LBA) { + if (tf->flags & ATA_TFLAG_LBA48) { + block |= (u64)tf->hob_lbah << 40; + block |= (u64)tf->hob_lbam << 32; + block |= tf->hob_lbal << 24; + } else + block |= (tf->device & 0xf) << 24; + + block |= tf->lbah << 16; + block |= tf->lbam << 8; + block |= tf->lbal; + } else { + u32 cyl, head, sect; + + cyl = tf->lbam | (tf->lbah << 8); + head = tf->device & 0xf; + sect = tf->lbal; + + block = (cyl * dev->heads + head) * dev->sectors + sect; + } + + return block; +} + +/** + * ata_build_rw_tf - Build ATA taskfile for given read/write request + * @tf: Target ATA taskfile + * @dev: ATA device @tf belongs to + * @block: Block address + * @n_block: Number of blocks + * @tf_flags: RW/FUA etc... + * @tag: tag + * + * LOCKING: + * None. + * + * Build ATA taskfile @tf for read/write request described by + * @block, @n_block, @tf_flags and @tag on @dev. + * + * RETURNS: + * + * 0 on success, -ERANGE if the request is too large for @dev, + * -EINVAL if the request is invalid. + */ +int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, + u64 block, u32 n_block, unsigned int tf_flags, + unsigned int tag) +{ + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->flags |= tf_flags; + + if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ_OFF | + ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ && + likely(tag != ATA_TAG_INTERNAL)) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + return -ERANGE; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + tf->nsect = tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = 1 << 6; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + return -ERANGE; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + return -ERANGE; + + if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) + return -EINVAL; + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if (!lba_28_ok(block, n_block)) + return -ERANGE; + + if (unlikely(ata_rwcmd_protocol(tf, dev) < 0)) + return -EINVAL; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return -ERANGE; + + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; +} + +/** * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask * @pio_mask: pio_mask * @mwdma_mask: mwdma_mask @@ -997,13 +1164,13 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) } /** - * ata_exec_internal - execute libata internal command + * ata_exec_internal_sg - execute libata internal command * @dev: Device to which the command is sent * @tf: Taskfile registers for the command and the result * @cdb: CDB for packet command * @dma_dir: Data tranfer direction of the command - * @buf: Data buffer of the command - * @buflen: Length of data buffer + * @sg: sg list for the data buffer of the command + * @n_elem: Number of sg entries * * Executes libata internal command with timeout. @tf contains * command on entry and result on return. Timeout and error @@ -1017,9 +1184,10 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc) * RETURNS: * Zero on success, AC_ERR_* mask on failure */ -unsigned ata_exec_internal(struct ata_device *dev, - struct ata_taskfile *tf, const u8 *cdb, - int dma_dir, void *buf, unsigned int buflen) +unsigned ata_exec_internal_sg(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, struct scatterlist *sg, + unsigned int n_elem) { struct ata_port *ap = dev->ap; u8 command = tf->command; @@ -1075,7 +1243,12 @@ unsigned ata_exec_internal(struct ata_device *dev, qc->flags |= ATA_QCFLAG_RESULT_TF; qc->dma_dir = dma_dir; if (dma_dir != DMA_NONE) { - ata_sg_init_one(qc, buf, buflen); + unsigned int i, buflen = 0; + + for (i = 0; i < n_elem; i++) + buflen += sg[i].length; + + ata_sg_init(qc, sg, n_elem); qc->nsect = buflen / ATA_SECT_SIZE; } @@ -1159,6 +1332,35 @@ unsigned ata_exec_internal(struct ata_device *dev, } /** + * ata_exec_internal_sg - execute libata internal command + * @dev: Device to which the command is sent + * @tf: Taskfile registers for the command and the result + * @cdb: CDB for packet command + * @dma_dir: Data tranfer direction of the command + * @buf: Data buffer of the command + * @buflen: Length of data buffer + * + * Wrapper around ata_exec_internal_sg() which takes simple + * buffer instead of sg list. + * + * LOCKING: + * None. Should be called with kernel context, might sleep. + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned ata_exec_internal(struct ata_device *dev, + struct ata_taskfile *tf, const u8 *cdb, + int dma_dir, void *buf, unsigned int buflen) +{ + struct scatterlist sg; + + sg_init_one(&sg, buf, buflen); + + return ata_exec_internal_sg(dev, tf, cdb, dma_dir, &sg, 1); +} + +/** * ata_do_simple_cmd - execute simple internal command * @dev: Device to which the command is sent * @cmd: Opcode to execute @@ -1222,7 +1424,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * ata_dev_read_id - Read ID data from the specified device * @dev: target device * @p_class: pointer to class of the target device (may be changed) - * @post_reset: is this read ID post-reset? + * @flags: ATA_READID_* flags * @id: buffer to read IDENTIFY data into * * Read ID data from the specified device. ATA_CMD_ID_ATA is @@ -1237,7 +1439,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * 0 on success, -errno otherwise. */ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, - int post_reset, u16 *id) + unsigned int flags, u16 *id) { struct ata_port *ap = dev->ap; unsigned int class = *p_class; @@ -1269,10 +1471,17 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, } tf.protocol = ATA_PROT_PIO; + tf.flags |= ATA_TFLAG_POLLING; /* for polling presence detection */ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE, id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { + if (err_mask & AC_ERR_NODEV_HINT) { + DPRINTK("ata%u.%d: NODEV after polling detection\n", + ap->id, dev->devno); + return -ENOENT; + } + rc = -EIO; reason = "I/O error"; goto err_out; @@ -1292,7 +1501,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, goto err_out; } - if (post_reset && class == ATA_DEV_ATA) { + if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) { /* * The exact sequence expected by certain pre-ATA4 drives is: * SRST RESET @@ -1312,7 +1521,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, /* current CHS translation info (id[53-58]) might be * changed. reread the identify device info. */ - post_reset = 0; + flags &= ~ATA_READID_POSTRESET; goto retry; } } @@ -1343,7 +1552,10 @@ static void ata_dev_config_ncq(struct ata_device *dev, desc[0] = '\0'; return; } - + if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) { + snprintf(desc, desc_sz, "NCQ (not used)"); + return; + } if (ap->flags & ATA_FLAG_NCQ) { hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1); dev->flags |= ATA_DFLAG_NCQ; @@ -1372,7 +1584,6 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap) /** * ata_dev_configure - Configure the specified ATA/ATAPI device * @dev: Target device to configure - * @print_info: Enable device info printout * * Configure @dev according to @dev->id. Generic and low-level * driver specific fixups are also applied. @@ -1383,9 +1594,10 @@ static void ata_set_port_max_cmd_len(struct ata_port *ap) * RETURNS: * 0 on success, -errno otherwise */ -int ata_dev_configure(struct ata_device *dev, int print_info) +int ata_dev_configure(struct ata_device *dev) { struct ata_port *ap = dev->ap; + int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO; const u16 *id = dev->id; unsigned int xfer_mask; char revbuf[7]; /* XYZ-99\0 */ @@ -1452,6 +1664,10 @@ int ata_dev_configure(struct ata_device *dev, int print_info) if (ata_id_has_lba48(id)) { dev->flags |= ATA_DFLAG_LBA48; lba_desc = "LBA48"; + + if (dev->n_sectors >= (1UL << 28) && + ata_id_has_flush_ext(id)) + dev->flags |= ATA_DFLAG_FLUSH_EXT; } /* config NCQ */ @@ -1528,6 +1744,11 @@ int ata_dev_configure(struct ata_device *dev, int print_info) cdb_intr_string); } + /* determine max_sectors */ + dev->max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + dev->max_sectors = ATA_MAX_SECTORS_LBA48; + if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) { /* Let the user know. We don't want to disallow opens for rescue purposes, or in case the vendor is just a blithering @@ -1629,11 +1850,14 @@ int ata_bus_probe(struct ata_port *ap) if (!ata_dev_enabled(dev)) continue; - rc = ata_dev_read_id(dev, &dev->class, 1, dev->id); + rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET, + dev->id); if (rc) goto fail; - rc = ata_dev_configure(dev, 1); + ap->eh_context.i.flags |= ATA_EHI_PRINTINFO; + rc = ata_dev_configure(dev); + ap->eh_context.i.flags &= ~ATA_EHI_PRINTINFO; if (rc) goto fail; } @@ -2151,6 +2375,7 @@ int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0) static int ata_dev_set_mode(struct ata_device *dev) { + struct ata_eh_context *ehc = &dev->ap->eh_context; unsigned int err_mask; int rc; @@ -2165,7 +2390,9 @@ static int ata_dev_set_mode(struct ata_device *dev) return -EIO; } + ehc->i.flags |= ATA_EHI_POST_SETMODE; rc = ata_dev_revalidate(dev, 0); + ehc->i.flags &= ~ATA_EHI_POST_SETMODE; if (rc) return rc; @@ -2323,11 +2550,14 @@ static inline void ata_tf_to_host(struct ata_port *ap, * Sleep until ATA Status register bit BSY clears, * or a timeout occurs. * - * LOCKING: None. + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. */ - -unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, unsigned long tmout) +int ata_busy_sleep(struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) { unsigned long timer_start, timeout; u8 status; @@ -2335,27 +2565,32 @@ unsigned int ata_busy_sleep (struct ata_port *ap, status = ata_busy_wait(ap, ATA_BUSY, 300); timer_start = jiffies; timeout = timer_start + tmout_pat; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { + while (status != 0xff && (status & ATA_BUSY) && + time_before(jiffies, timeout)) { msleep(50); status = ata_busy_wait(ap, ATA_BUSY, 3); } - if (status & ATA_BUSY) + if (status != 0xff && (status & ATA_BUSY)) ata_port_printk(ap, KERN_WARNING, "port is slow to respond, please be patient " "(Status 0x%x)\n", status); timeout = timer_start + tmout; - while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) { + while (status != 0xff && (status & ATA_BUSY) && + time_before(jiffies, timeout)) { msleep(50); status = ata_chk_status(ap); } + if (status == 0xff) + return -ENODEV; + if (status & ATA_BUSY) { ata_port_printk(ap, KERN_ERR, "port failed to respond " "(%lu secs, Status 0x%x)\n", tmout / HZ, status); - return 1; + return -EBUSY; } return 0; @@ -2446,10 +2681,8 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * the bus shows 0xFF because the odd clown forgets the D7 * pulldown resistor. */ - if (ata_check_status(ap) == 0xFF) { - ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n"); - return AC_ERR_OTHER; - } + if (ata_check_status(ap) == 0xFF) + return 0; ata_bus_post_reset(ap, devmask); @@ -2775,9 +3008,9 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) } /** - * sata_std_hardreset - reset host port via SATA phy reset + * sata_port_hardreset - reset port via SATA phy reset * @ap: port to reset - * @class: resulting class of attached device + * @timing: timing parameters { interval, duratinon, timeout } in msec * * SATA phy-reset host port using DET bits of SControl register. * @@ -2787,10 +3020,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes) * RETURNS: * 0 on success, -errno otherwise. */ -int sata_std_hardreset(struct ata_port *ap, unsigned int *class) +int sata_port_hardreset(struct ata_port *ap, const unsigned long *timing) { - struct ata_eh_context *ehc = &ap->eh_context; - const unsigned long *timing = sata_ehc_deb_timing(ehc); u32 scontrol; int rc; @@ -2803,24 +3034,24 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) * and Sil3124. */ if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; + goto out; scontrol = (scontrol & 0x0f0) | 0x304; if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol))) - return rc; + goto out; sata_set_spd(ap); } /* issue phy wake/reset */ if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol))) - return rc; + goto out; scontrol = (scontrol & 0x0f0) | 0x301; if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol))) - return rc; + goto out; /* Couldn't find anything in SATA I/II specs, but AHCI-1.1 * 10.4.2 says at least 1 ms. @@ -2828,7 +3059,40 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class) msleep(1); /* bring phy back */ - sata_phy_resume(ap, timing); + rc = sata_phy_resume(ap, timing); + out: + DPRINTK("EXIT, rc=%d\n", rc); + return rc; +} + +/** + * sata_std_hardreset - reset host port via SATA phy reset + * @ap: port to reset + * @class: resulting class of attached device + * + * SATA phy-reset host port using DET bits of SControl register, + * wait for !BSY and classify the attached device. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_std_hardreset(struct ata_port *ap, unsigned int *class) +{ + const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context); + int rc; + + DPRINTK("ENTER\n"); + + /* do hardreset */ + rc = sata_port_hardreset(ap, timing); + if (rc) { + ata_port_printk(ap, KERN_ERR, + "COMRESET failed (errno=%d)\n", rc); + return rc; + } /* TODO: phy layer with polling, timeouts, etc. */ if (ata_port_offline(ap)) { @@ -2967,7 +3231,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, /** * ata_dev_revalidate - Revalidate ATA device * @dev: device to revalidate - * @post_reset: is this revalidation after reset? + * @readid_flags: read ID flags * * Re-read IDENTIFY page and make sure @dev is still attached to * the port. @@ -2978,7 +3242,7 @@ static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class, * RETURNS: * 0 on success, negative errno otherwise */ -int ata_dev_revalidate(struct ata_device *dev, int post_reset) +int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) { unsigned int class = dev->class; u16 *id = (void *)dev->ap->sector_buf; @@ -2990,7 +3254,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset) } /* read ID data */ - rc = ata_dev_read_id(dev, &class, post_reset, id); + rc = ata_dev_read_id(dev, &class, readid_flags, id); if (rc) goto fail; @@ -3003,7 +3267,7 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset) memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS); /* configure device according to the new ID */ - rc = ata_dev_configure(dev, 0); + rc = ata_dev_configure(dev); if (rc == 0) return 0; @@ -3012,37 +3276,55 @@ int ata_dev_revalidate(struct ata_device *dev, int post_reset) return rc; } -static const char * const ata_dma_blacklist [] = { - "WDC AC11000H", NULL, - "WDC AC22100H", NULL, - "WDC AC32500H", NULL, - "WDC AC33100H", NULL, - "WDC AC31600H", NULL, - "WDC AC32100H", "24.09P07", - "WDC AC23200L", "21.10N21", - "Compaq CRD-8241B", NULL, - "CRD-8400B", NULL, - "CRD-8480B", NULL, - "CRD-8482B", NULL, - "CRD-84", NULL, - "SanDisk SDP3B", NULL, - "SanDisk SDP3B-64", NULL, - "SANYO CD-ROM CRD", NULL, - "HITACHI CDR-8", NULL, - "HITACHI CDR-8335", NULL, - "HITACHI CDR-8435", NULL, - "Toshiba CD-ROM XM-6202B", NULL, - "TOSHIBA CD-ROM XM-1702BC", NULL, - "CD-532E-A", NULL, - "E-IDE CD-ROM CR-840", NULL, - "CD-ROM Drive/F5A", NULL, - "WPI CDD-820", NULL, - "SAMSUNG CD-ROM SC-148C", NULL, - "SAMSUNG CD-ROM SC", NULL, - "SanDisk SDP3B-64", NULL, - "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, - "_NEC DV5800A", NULL, - "SAMSUNG CD-ROM SN-124", "N001" +struct ata_blacklist_entry { + const char *model_num; + const char *model_rev; + unsigned long horkage; +}; + +static const struct ata_blacklist_entry ata_device_blacklist [] = { + /* Devices with DMA related problems under Linux */ + { "WDC AC11000H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC22100H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC32500H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC33100H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC31600H", NULL, ATA_HORKAGE_NODMA }, + { "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA }, + { "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA }, + { "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-8400B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-8480B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-8482B", NULL, ATA_HORKAGE_NODMA }, + { "CRD-84", NULL, ATA_HORKAGE_NODMA }, + { "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA }, + { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, + { "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA }, + { "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA }, + { "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA }, + { "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA }, + { "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA }, + { "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA }, + { "CD-532E-A", NULL, ATA_HORKAGE_NODMA }, + { "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA }, + { "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA }, + { "WPI CDD-820", NULL, ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA }, + { "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA }, + { "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA }, + { "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA }, + { "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA }, + + /* Devices we expect to fail diagnostics */ + + /* Devices where NCQ should be avoided */ + /* NCQ is slow */ + { "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ }, + + /* Devices with NCQ limits */ + + /* End Marker */ + { } }; static int ata_strim(char *s, size_t len) @@ -3057,20 +3339,12 @@ static int ata_strim(char *s, size_t len) return len; } -static int ata_dma_blacklisted(const struct ata_device *dev) +unsigned long ata_device_blacklisted(const struct ata_device *dev) { unsigned char model_num[40]; unsigned char model_rev[16]; unsigned int nlen, rlen; - int i; - - /* We don't support polling DMA. - * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) - * if the LLDD handles only interrupts in the HSM_ST_LAST state. - */ - if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && - (dev->flags & ATA_DFLAG_CDB_INTR)) - return 1; + const struct ata_blacklist_entry *ad = ata_device_blacklist; ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, sizeof(model_num)); @@ -3079,17 +3353,30 @@ static int ata_dma_blacklisted(const struct ata_device *dev) nlen = ata_strim(model_num, sizeof(model_num)); rlen = ata_strim(model_rev, sizeof(model_rev)); - for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { - if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { - if (ata_dma_blacklist[i+1] == NULL) - return 1; - if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) - return 1; + while (ad->model_num) { + if (!strncmp(ad->model_num, model_num, nlen)) { + if (ad->model_rev == NULL) + return ad->horkage; + if (!strncmp(ad->model_rev, model_rev, rlen)) + return ad->horkage; } + ad++; } return 0; } +static int ata_dma_blacklisted(const struct ata_device *dev) +{ + /* We don't support polling DMA. + * DMA blacklist those ATAPI devices with CDB-intr (and use PIO) + * if the LLDD handles only interrupts in the HSM_ST_LAST state. + */ + if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) && + (dev->flags & ATA_DFLAG_CDB_INTR)) + return 1; + return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0; +} + /** * ata_dev_xfermask - Compute supported xfermask of the given device * @dev: Device to compute xfermask for @@ -3117,6 +3404,13 @@ static void ata_dev_xfermask(struct ata_device *dev) */ if (ap->cbl == ATA_CBL_PATA40) xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); + /* Apply drive side cable rule. Unknown or 80 pin cables reported + * host side are checked drive side as well. Cases where we know a + * 40wire cable is used safely for 80 are not checked here. + */ + if (ata_drive_40wire(dev->id) && (ap->cbl == ATA_CBL_PATA_UNK || ap->cbl == ATA_CBL_PATA80)) + xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA); + xfer_mask &= ata_pack_xfermask(dev->pio_mask, dev->mwdma_mask, dev->udma_mask); @@ -3234,8 +3528,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, * LOCKING: * spin_lock_irqsave(host lock) */ - -static void ata_sg_clean(struct ata_queued_cmd *qc) +void ata_sg_clean(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct scatterlist *sg = qc->__sg; @@ -3393,19 +3686,15 @@ void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen) { - struct scatterlist *sg; - qc->flags |= ATA_QCFLAG_SINGLE; - memset(&qc->sgent, 0, sizeof(qc->sgent)); qc->__sg = &qc->sgent; qc->n_elem = 1; qc->orig_n_elem = 1; qc->buf_virt = buf; qc->nbytes = buflen; - sg = qc->__sg; - sg_init_one(sg, buf, buflen); + sg_init_one(&qc->sgent, buf, buflen); } /** @@ -4198,8 +4487,12 @@ fsm_start: /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; else - /* HSM violation. Let EH handle this */ - qc->err_mask |= AC_ERR_HSM; + /* HSM violation. Let EH handle this. + * Phantom devices also trigger this + * condition. Mark hint. + */ + qc->err_mask |= AC_ERR_HSM | + AC_ERR_NODEV_HINT; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -4439,6 +4732,14 @@ void __ata_qc_complete(struct ata_queued_cmd *qc) qc->complete_fn(qc); } +static void fill_result_tf(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + ap->ops->tf_read(ap, &qc->result_tf); + qc->result_tf.flags = qc->tf.flags; +} + /** * ata_qc_complete - Complete an active ATA command * @qc: Command to complete @@ -4476,7 +4777,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) { if (!ata_tag_internal(qc->tag)) { /* always fill result TF for failed qc */ - ap->ops->tf_read(ap, &qc->result_tf); + fill_result_tf(qc); ata_qc_schedule_eh(qc); return; } @@ -4484,7 +4785,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) /* read result TF if requested */ if (qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); + fill_result_tf(qc); __ata_qc_complete(qc); } else { @@ -4493,7 +4794,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) /* read result TF if failed or requested */ if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF) - ap->ops->tf_read(ap, &qc->result_tf); + fill_result_tf(qc); __ata_qc_complete(qc); } @@ -4673,6 +4974,14 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) } } + /* Some controllers show flaky interrupt behavior after + * setting xfer mode. Use polling instead. + */ + if (unlikely(qc->tf.command == ATA_CMD_SET_FEATURES && + qc->tf.feature == SETFEATURES_XFER) && + (ap->flags & ATA_FLAG_SETXFER_POLLING)) + qc->tf.flags |= ATA_TFLAG_POLLING; + /* select the device */ ata_dev_select(ap, qc->dev->devno, 1, 0); @@ -4781,6 +5090,7 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) inline unsigned int ata_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc) { + struct ata_eh_info *ehi = &ap->eh_info; u8 status, host_stat = 0; VPRINTK("ata%u: protocol %d task_state %d\n", @@ -4841,6 +5151,11 @@ inline unsigned int ata_host_intr (struct ata_port *ap, ap->ops->irq_clear(ap); ata_hsm_move(ap, qc, status, 0); + + if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA)) + ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat); + return 1; /* irq handled */ idle_irq: @@ -5047,7 +5362,7 @@ int ata_flush_cache(struct ata_device *dev) if (!ata_try_flush_cache(dev)) return 0; - if (ata_id_has_flush_ext(dev->id)) + if (dev->flags & ATA_DFLAG_FLUSH_EXT) cmd = ATA_CMD_FLUSH_EXT; else cmd = ATA_CMD_FLUSH; @@ -5519,9 +5834,8 @@ int ata_device_add(const struct ata_probe_ent *ent) ap->ioaddr.bmdma_addr, irq_line); - ata_chk_status(ap); - host->ops->irq_clear(ap); - ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ + /* freeze port before requesting IRQ */ + ata_eh_freeze_port(ap); } /* obtain irq, that may be shared between channels */ @@ -6119,6 +6433,7 @@ EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_std_prereset); EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_port_hardreset); EXPORT_SYMBOL_GPL(sata_std_hardreset); EXPORT_SYMBOL_GPL(ata_std_postreset); EXPORT_SYMBOL_GPL(ata_dev_classify); @@ -6145,6 +6460,7 @@ EXPORT_SYMBOL_GPL(ata_host_suspend); EXPORT_SYMBOL_GPL(ata_host_resume); EXPORT_SYMBOL_GPL(ata_id_string); EXPORT_SYMBOL_GPL(ata_id_c_string); +EXPORT_SYMBOL_GPL(ata_device_blacklisted); EXPORT_SYMBOL_GPL(ata_scsi_simulate); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); |