diff options
Diffstat (limited to 'block/blk-core.c')
| -rw-r--r-- | block/blk-core.c | 72 |
1 files changed, 36 insertions, 36 deletions
diff --git a/block/blk-core.c b/block/blk-core.c index 2616cdd049a8..86d22e7d65c5 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -531,7 +531,7 @@ EXPORT_SYMBOL(blk_alloc_queue_node); * request queue; this lock will be taken also from interrupt context, so irq * disabling is needed for it. * - * Function returns a pointer to the initialized request queue, or NULL if + * Function returns a pointer to the initialized request queue, or %NULL if * it didn't succeed. * * Note: @@ -913,7 +913,7 @@ void blk_requeue_request(struct request_queue *q, struct request *rq) EXPORT_SYMBOL(blk_requeue_request); /** - * blk_insert_request - insert a special request in to a request queue + * blk_insert_request - insert a special request into a request queue * @q: request queue where request should be inserted * @rq: request to be inserted * @at_head: insert request at head or tail of queue @@ -923,8 +923,8 @@ EXPORT_SYMBOL(blk_requeue_request); * Many block devices need to execute commands asynchronously, so they don't * block the whole kernel from preemption during request execution. This is * accomplished normally by inserting aritficial requests tagged as - * REQ_SPECIAL in to the corresponding request queue, and letting them be - * scheduled for actual execution by the request queue. + * REQ_TYPE_SPECIAL in to the corresponding request queue, and letting them + * be scheduled for actual execution by the request queue. * * We have the option of inserting the head or the tail of the queue. * Typically we use the tail for new ioctls and so forth. We use the head @@ -1322,7 +1322,7 @@ static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors) } /** - * generic_make_request: hand a buffer to its device driver for I/O + * generic_make_request - hand a buffer to its device driver for I/O * @bio: The bio describing the location in memory and on the device. * * generic_make_request() is used to make I/O requests of block @@ -1480,13 +1480,13 @@ void generic_make_request(struct bio *bio) EXPORT_SYMBOL(generic_make_request); /** - * submit_bio: submit a bio to the block device layer for I/O + * submit_bio - submit a bio to the block device layer for I/O * @rw: whether to %READ or %WRITE, or maybe to %READA (read ahead) * @bio: The &struct bio which describes the I/O * * submit_bio() is very similar in purpose to generic_make_request(), and * uses that function to do most of the work. Both are fairly rough - * interfaces, @bio must be presetup and ready for I/O. + * interfaces; @bio must be presetup and ready for I/O. * */ void submit_bio(int rw, struct bio *bio) @@ -1524,7 +1524,7 @@ EXPORT_SYMBOL(submit_bio); /** * __end_that_request_first - end I/O on a request * @req: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * * Description: @@ -1532,8 +1532,8 @@ EXPORT_SYMBOL(submit_bio); * for the next range of segments (if any) in the cluster. * * Return: - * 0 - we are done with this request, call end_that_request_last() - * 1 - still buffers pending for this request + * %0 - we are done with this request, call end_that_request_last() + * %1 - still buffers pending for this request **/ static int __end_that_request_first(struct request *req, int error, int nr_bytes) @@ -1544,7 +1544,7 @@ static int __end_that_request_first(struct request *req, int error, blk_add_trace_rq(req->q, req, BLK_TA_COMPLETE); /* - * for a REQ_BLOCK_PC request, we want to carry any eventual + * for a REQ_TYPE_BLOCK_PC request, we want to carry any eventual * sense key with us all the way through */ if (!blk_pc_request(req)) @@ -1810,11 +1810,11 @@ EXPORT_SYMBOL_GPL(blk_rq_cur_bytes); /** * end_queued_request - end all I/O on a queued request * @rq: the request being processed - * @uptodate: error value or 0/1 uptodate flag + * @uptodate: error value or %0/%1 uptodate flag * * Description: * Ends all I/O on a request, and removes it from the block layer queues. - * Not suitable for normal IO completion, unless the driver still has + * Not suitable for normal I/O completion, unless the driver still has * the request attached to the block layer. * **/ @@ -1827,7 +1827,7 @@ EXPORT_SYMBOL(end_queued_request); /** * end_dequeued_request - end all I/O on a dequeued request * @rq: the request being processed - * @uptodate: error value or 0/1 uptodate flag + * @uptodate: error value or %0/%1 uptodate flag * * Description: * Ends all I/O on a request. The request must already have been @@ -1845,14 +1845,14 @@ EXPORT_SYMBOL(end_dequeued_request); /** * end_request - end I/O on the current segment of the request * @req: the request being processed - * @uptodate: error value or 0/1 uptodate flag + * @uptodate: error value or %0/%1 uptodate flag * * Description: * Ends I/O on the current segment of a request. If that is the only * remaining segment, the request is also completed and freed. * - * This is a remnant of how older block drivers handled IO completions. - * Modern drivers typically end IO on the full request in one go, unless + * This is a remnant of how older block drivers handled I/O completions. + * Modern drivers typically end I/O on the full request in one go, unless * they have a residual value to account for. For that case this function * isn't really useful, unless the residual just happens to be the * full current segment. In other words, don't use this function in new @@ -1870,12 +1870,12 @@ EXPORT_SYMBOL(end_request); /** * blk_end_io - Generic end_io function to complete a request. * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete @rq * @bidi_bytes: number of bytes to complete @rq->next_rq * @drv_callback: function called between completion of bios in the request * and completion of the request. - * If the callback returns non 0, this helper returns without + * If the callback returns non %0, this helper returns without * completion of the request. * * Description: @@ -1883,8 +1883,8 @@ EXPORT_SYMBOL(end_request); * If @rq has leftover, sets it up for the next range of segments. * * Return: - * 0 - we are done with this request - * 1 - this request is not freed yet, it still has pending buffers. + * %0 - we are done with this request + * %1 - this request is not freed yet, it still has pending buffers. **/ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes, unsigned int bidi_bytes, @@ -1919,7 +1919,7 @@ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes, /** * blk_end_request - Helper function for drivers to complete the request. * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * * Description: @@ -1927,8 +1927,8 @@ static int blk_end_io(struct request *rq, int error, unsigned int nr_bytes, * If @rq has leftover, sets it up for the next range of segments. * * Return: - * 0 - we are done with this request - * 1 - still buffers pending for this request + * %0 - we are done with this request + * %1 - still buffers pending for this request **/ int blk_end_request(struct request *rq, int error, unsigned int nr_bytes) { @@ -1939,15 +1939,15 @@ EXPORT_SYMBOL_GPL(blk_end_request); /** * __blk_end_request - Helper function for drivers to complete the request. * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * * Description: * Must be called with queue lock held unlike blk_end_request(). * * Return: - * 0 - we are done with this request - * 1 - still buffers pending for this request + * %0 - we are done with this request + * %1 - still buffers pending for this request **/ int __blk_end_request(struct request *rq, int error, unsigned int nr_bytes) { @@ -1966,7 +1966,7 @@ EXPORT_SYMBOL_GPL(__blk_end_request); /** * blk_end_bidi_request - Helper function for drivers to complete bidi request. * @rq: the bidi request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete @rq * @bidi_bytes: number of bytes to complete @rq->next_rq * @@ -1974,8 +1974,8 @@ EXPORT_SYMBOL_GPL(__blk_end_request); * Ends I/O on a number of bytes attached to @rq and @rq->next_rq. * * Return: - * 0 - we are done with this request - * 1 - still buffers pending for this request + * %0 - we are done with this request + * %1 - still buffers pending for this request **/ int blk_end_bidi_request(struct request *rq, int error, unsigned int nr_bytes, unsigned int bidi_bytes) @@ -1987,11 +1987,11 @@ EXPORT_SYMBOL_GPL(blk_end_bidi_request); /** * blk_end_request_callback - Special helper function for tricky drivers * @rq: the request being processed - * @error: 0 for success, < 0 for error + * @error: %0 for success, < %0 for error * @nr_bytes: number of bytes to complete * @drv_callback: function called between completion of bios in the request * and completion of the request. - * If the callback returns non 0, this helper returns without + * If the callback returns non %0, this helper returns without * completion of the request. * * Description: @@ -2004,10 +2004,10 @@ EXPORT_SYMBOL_GPL(blk_end_bidi_request); * Don't use this interface in other places anymore. * * Return: - * 0 - we are done with this request - * 1 - this request is not freed yet. - * this request still has pending buffers or - * the driver doesn't want to finish this request yet. + * %0 - we are done with this request + * %1 - this request is not freed yet. + * this request still has pending buffers or + * the driver doesn't want to finish this request yet. **/ int blk_end_request_callback(struct request *rq, int error, unsigned int nr_bytes, |