diff options
Diffstat (limited to 'arch')
22 files changed, 113 insertions, 176 deletions
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 21ab782cc8e9..06ecbafd01ee 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -19,6 +19,7 @@ #include <linux/i2c-gpio.h> #include <linux/atmel-mci.h> #include <linux/platform_data/crypto-atmel.h> +#include <linux/platform_data/mmc-atmel-mci.h> #include <linux/platform_data/at91_adc.h> @@ -30,7 +31,6 @@ #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> #include <linux/platform_data/dma-atmel.h> -#include <mach/atmel-mci.h> #include <mach/hardware.h> #include <media/atmel-isi.h> diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h deleted file mode 100644 index 3069e4135573..000000000000 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __MACH_ATMEL_MCI_H -#define __MACH_ATMEL_MCI_H - -#include <linux/platform_data/dma-atmel.h> - -/** - * struct mci_dma_data - DMA data for MCI interface - */ -struct mci_dma_data { - struct at_dma_slave sdata; -}; - -/* accessor macros */ -#define slave_data_ptr(s) (&(s)->sdata) -#define find_slave_dev(s) ((s)->sdata.dma_dev) - -#endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 97767a27ca9d..e0ad64fde20e 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -21,8 +21,10 @@ #include <linux/i2c.h> #include <linux/spi/spi.h> #include <linux/usb/musb.h> +#include <linux/mmc/host.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/platform_data/mmc-omap.h> #include <linux/mfd/menelaus.h> #include <sound/tlv320aic3x.h> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ddfc8df83c6a..3d5040f82e90 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -484,7 +484,7 @@ static struct omap_mux_partition *partition; * Current flows to eMMC when eMMC is off and the data lines are pulled up, * so pull them down. N.B. we pull 8 lines because we are using 8 lines. */ -static void rx51_mmc2_remux(struct device *dev, int slot, int power_on) +static void rx51_mmc2_remux(struct device *dev, int power_on) { if (power_on) omap_mux_write_array(partition, rx51_mmc2_on_mux); @@ -500,7 +500,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .cover_only = true, .gpio_cd = 160, .gpio_wp = -EINVAL, - .power_saving = true, }, { .name = "internal", @@ -510,7 +509,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, .nonremovable = true, - .power_saving = true, .remux = rx51_mmc2_remux, }, {} /* Terminator */ diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 07d4c7b35754..dc6e79c4484a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -14,14 +14,15 @@ #include <linux/string.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/mmc/host.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include "soc.h" #include "omap_device.h" #include "omap-pm.h" #include "mux.h" -#include "mmc.h" #include "hsmmc.h" #include "control.h" @@ -32,25 +33,14 @@ static u16 control_devconf1_offset; #define HSMMC_NAME_LEN 9 -#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) - -static int hsmmc_get_context_loss(struct device *dev) -{ - return omap_pm_get_dev_context_loss_count(dev); -} - -#else -#define hsmmc_get_context_loss NULL -#endif - -static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, - int power_on, int vdd) +static void omap_hsmmc1_before_set_reg(struct device *dev, + int power_on, int vdd) { u32 reg, prog_io; - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_platform_data *mmc = dev->platform_data; - if (mmc->slots[0].remux) - mmc->slots[0].remux(dev, slot, power_on); + if (mmc->remux) + mmc->remux(dev, power_on); /* * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the @@ -72,7 +62,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1); } - if (mmc->slots[0].internal_clock) { + if (mmc->internal_clock) { reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); reg |= OMAP2_MMCSDIO1ADPCLKISEL; omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0); @@ -96,8 +86,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, int slot, } } -static void omap_hsmmc1_after_set_reg(struct device *dev, int slot, - int power_on, int vdd) +static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd) { u32 reg; @@ -120,34 +109,32 @@ static void omap_hsmmc1_after_set_reg(struct device *dev, int slot, } } -static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) +static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc) { u32 reg; reg = omap_ctrl_readl(control_devconf1_offset); - if (mmc->slots[0].internal_clock) + if (mmc->internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; else reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; omap_ctrl_writel(reg, control_devconf1_offset); } -static void hsmmc2_before_set_reg(struct device *dev, int slot, - int power_on, int vdd) +static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_platform_data *mmc = dev->platform_data; - if (mmc->slots[0].remux) - mmc->slots[0].remux(dev, slot, power_on); + if (mmc->remux) + mmc->remux(dev, power_on); if (power_on) hsmmc2_select_input_clk_src(mmc); } -static int am35x_hsmmc2_set_power(struct device *dev, int slot, - int power_on, int vdd) +static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd) { - struct omap_mmc_platform_data *mmc = dev->platform_data; + struct omap_hsmmc_platform_data *mmc = dev->platform_data; if (power_on) hsmmc2_select_input_clk_src(mmc); @@ -155,23 +142,22 @@ static int am35x_hsmmc2_set_power(struct device *dev, int slot, return 0; } -static int nop_mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) +static int nop_mmc_set_power(struct device *dev, int power_on, int vdd) { return 0; } -static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, - int controller_nr) +static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data + *mmc_controller, int controller_nr) { - if (gpio_is_valid(mmc_controller->slots[0].switch_pin) && - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, - OMAP_PIN_INPUT_PULLUP); - if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) && - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) - omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, - OMAP_PIN_INPUT_PULLUP); + if (gpio_is_valid(mmc_controller->switch_pin) && + (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->switch_pin, + OMAP_PIN_INPUT_PULLUP); + if (gpio_is_valid(mmc_controller->gpio_wp) && + (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES)) + omap_mux_init_gpio(mmc_controller->gpio_wp, + OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { if (controller_nr == 0) { omap_mux_init_signal("sdmmc1_clk", @@ -180,7 +166,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("sdmmc1_dat0", OMAP_PIN_INPUT_PULLUP); - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc1_dat1", OMAP_PIN_INPUT_PULLUP); @@ -189,7 +175,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc1_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc1_dat4", OMAP_PIN_INPUT_PULLUP); @@ -214,7 +200,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, * For 8 wire configurations, Lines DAT4, 5, 6 and 7 * need to be muxed in the board-*.c files */ - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) { omap_mux_init_signal("sdmmc2_dat1", OMAP_PIN_INPUT_PULLUP); @@ -223,7 +209,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, omap_mux_init_signal("sdmmc2_dat3", OMAP_PIN_INPUT_PULLUP); } - if (mmc_controller->slots[0].caps & + if (mmc_controller->caps & MMC_CAP_8_BIT_DATA) { omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", OMAP_PIN_INPUT_PULLUP); @@ -243,7 +229,7 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, } static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, - struct omap_mmc_platform_data *mmc) + struct omap_hsmmc_platform_data *mmc) { char *hc_name; @@ -259,38 +245,22 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, else snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1); - mmc->slots[0].name = hc_name; - mmc->nr_slots = 1; - mmc->slots[0].caps = c->caps; - mmc->slots[0].pm_caps = c->pm_caps; - mmc->slots[0].internal_clock = !c->ext_clock; - mmc->max_freq = c->max_freq; + mmc->name = hc_name; + mmc->caps = c->caps; + mmc->internal_clock = !c->ext_clock; mmc->reg_offset = 0; - mmc->get_context_loss_count = hsmmc_get_context_loss; - mmc->slots[0].switch_pin = c->gpio_cd; - mmc->slots[0].gpio_wp = c->gpio_wp; + mmc->switch_pin = c->gpio_cd; + mmc->gpio_wp = c->gpio_wp; - mmc->slots[0].remux = c->remux; - mmc->slots[0].init_card = c->init_card; + mmc->remux = c->remux; + mmc->init_card = c->init_card; if (c->cover_only) - mmc->slots[0].cover = 1; + mmc->cover = 1; if (c->nonremovable) - mmc->slots[0].nonremovable = 1; - - if (c->power_saving) - mmc->slots[0].power_saving = 1; - - if (c->no_off) - mmc->slots[0].no_off = 1; - - if (c->no_off_init) - mmc->slots[0].no_regulator_off_init = c->no_off_init; - - if (c->vcc_aux_disable_is_sleep) - mmc->slots[0].vcc_aux_disable_is_sleep = 1; + mmc->nonremovable = 1; /* * NOTE: MMC slots should have a Vcc regulator set up. @@ -300,42 +270,42 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, * temporary HACK: ocr_mask instead of fixed supply */ if (soc_is_am35xx()) - mmc->slots[0].ocr_mask = MMC_VDD_165_195 | + mmc->ocr_mask = MMC_VDD_165_195 | MMC_VDD_26_27 | MMC_VDD_27_28 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32; else - mmc->slots[0].ocr_mask = c->ocr_mask; + mmc->ocr_mask = c->ocr_mask; if (!soc_is_am35xx()) - mmc->slots[0].features |= HSMMC_HAS_PBIAS; + mmc->features |= HSMMC_HAS_PBIAS; switch (c->mmc) { case 1: - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + if (mmc->features & HSMMC_HAS_PBIAS) { /* on-chip level shifting via PBIAS0/PBIAS1 */ - mmc->slots[0].before_set_reg = + mmc->before_set_reg = omap_hsmmc1_before_set_reg; - mmc->slots[0].after_set_reg = + mmc->after_set_reg = omap_hsmmc1_after_set_reg; } if (soc_is_am35xx()) - mmc->slots[0].set_power = nop_mmc_set_power; + mmc->set_power = nop_mmc_set_power; /* OMAP3630 HSMMC1 supports only 4-bit */ if (cpu_is_omap3630() && (c->caps & MMC_CAP_8_BIT_DATA)) { c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; - mmc->slots[0].caps = c->caps; + mmc->caps = c->caps; } break; case 2: if (soc_is_am35xx()) - mmc->slots[0].set_power = am35x_hsmmc2_set_power; + mmc->set_power = am35x_hsmmc2_set_power; if (c->ext_clock) c->transceiver = 1; @@ -343,17 +313,17 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { + if (mmc->features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; - mmc->slots[0].after_set_reg = NULL; + mmc->before_set_reg = hsmmc2_before_set_reg; + mmc->after_set_reg = NULL; } break; case 3: case 4: case 5: - mmc->slots[0].before_set_reg = NULL; - mmc->slots[0].after_set_reg = NULL; + mmc->before_set_reg = NULL; + mmc->after_set_reg = NULL; break; default: pr_err("MMC%d configuration not supported!\n", c->mmc); @@ -368,7 +338,7 @@ static int omap_hsmmc_done; void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) { struct platform_device *pdev; - struct omap_mmc_platform_data *mmc_pdata; + struct omap_hsmmc_platform_data *mmc_pdata; int res; if (omap_hsmmc_done != 1) @@ -388,8 +358,8 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c) if (!mmc_pdata) continue; - mmc_pdata->slots[0].switch_pin = c->gpio_cd; - mmc_pdata->slots[0].gpio_wp = c->gpio_wp; + mmc_pdata->switch_pin = c->gpio_cd; + mmc_pdata->gpio_wp = c->gpio_wp; res = omap_device_register(pdev); if (res) @@ -408,12 +378,12 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, struct omap_device *od; struct platform_device *pdev; char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN]; - struct omap_mmc_platform_data *mmc_data; - struct omap_mmc_dev_attr *mmc_dev_attr; + struct omap_hsmmc_platform_data *mmc_data; + struct omap_hsmmc_dev_attr *mmc_dev_attr; char *name; int res; - mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL); + mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL); if (!mmc_data) { pr_err("Cannot allocate memory for mmc device!\n"); return; @@ -463,7 +433,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, } res = platform_device_add_data(pdev, mmc_data, - sizeof(struct omap_mmc_platform_data)); + sizeof(struct omap_hsmmc_platform_data)); if (res) { pr_err("Could not add pdata for %s\n", name); goto put_pdev; @@ -489,7 +459,7 @@ put_pdev: platform_device_put(pdev); free_name: - kfree(mmc_data->slots[0].name); + kfree(mmc_data->name); free_mmc: kfree(mmc_data); diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h index 7f2e790e0929..148cd9b15499 100644 --- a/arch/arm/mach-omap2/hsmmc.h +++ b/arch/arm/mach-omap2/hsmmc.h @@ -12,25 +12,18 @@ struct omap2_hsmmc_info { u8 mmc; /* controller 1/2/3 */ u32 caps; /* 4/8 wires and any additional host * capabilities OR'd (ref. linux/mmc/host.h) */ - u32 pm_caps; /* PM capabilities */ bool transceiver; /* MMC-2 option */ bool ext_clock; /* use external pin for input clock */ bool cover_only; /* No card detect - just cover switch */ bool nonremovable; /* Nonremovable e.g. eMMC */ - bool power_saving; /* Try to sleep or power off when possible */ - bool no_off; /* power_saving and power is not to go off */ - bool no_off_init; /* no power off when not in MMC sleep state */ - bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */ bool deferred; /* mmc needs a deferred probe */ int gpio_cd; /* or -EINVAL */ int gpio_wp; /* or -EINVAL */ char *name; /* or NULL for default */ struct platform_device *pdev; /* mmc controller instance */ int ocr_mask; /* temporary HACK */ - int max_freq; /* maximum clock, if constrained by external - * circuitry, or 0 for default */ /* Remux (pad configuration) when powering on/off */ - void (*remux)(struct device *dev, int slot, int power_on); + void (*remux)(struct device *dev, int power_on); /* init some special card */ void (*init_card)(struct mmc_card *card); }; diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h index 0cd4b089da9c..30d39b97e7dd 100644 --- a/arch/arm/mach-omap2/mmc.h +++ b/arch/arm/mach-omap2/mmc.h @@ -1,5 +1,3 @@ -#include <linux/mmc/host.h> -#include <linux/platform_data/mmc-omap.h> #define OMAP24XX_NR_MMC 2 #define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE @@ -7,14 +5,6 @@ #define OMAP4_MMC_REG_OFFSET 0x100 -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - struct omap_hwmod; int omap_msdi_reset(struct omap_hwmod *oh); diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 16b20cedc38d..b7cb44abe49b 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -36,7 +36,6 @@ #include "soc.h" #include "iomap.h" #include "common.h" -#include "mmc.h" #include "prminst44xx.h" #include "prcm_mpu44xx.h" #include "omap4-sar-layout.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c2555cb95e71..79127b35fe60 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -15,12 +15,12 @@ #include <linux/i2c-omap.h> #include <linux/platform_data/asoc-ti-mcbsp.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/omap-dma.h> #include <plat/dmtimer.h> #include "omap_hwmod.h" -#include "mmc.h" #include "l3_2xxx.h" #include "soc.h" @@ -372,7 +372,7 @@ static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = { { .role = "dbck", .clk = "mmchsdb1_fck" }, }; -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index a579b89ce9b7..cabc5695b504 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -15,10 +15,10 @@ */ #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "omap_hwmod.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "cm33xx.h" #include "prm33xx.h" @@ -836,7 +836,7 @@ static struct omap_hwmod_class am33xx_mmc_hwmod_class = { }; /* mmc0 */ -static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = { +static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -854,7 +854,7 @@ struct omap_hwmod am33xx_mmc0_hwmod = { }; /* mmc1 */ -static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; @@ -872,7 +872,7 @@ struct omap_hwmod am33xx_mmc1_hwmod = { }; /* mmc2 */ -static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = { +static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; struct omap_hwmod am33xx_mmc2_hwmod = { diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 6b406ca4bd3b..0cf7b563dcd1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -27,7 +27,6 @@ #include "prm33xx.h" #include "prm-regbits-33xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "omap_hwmod_33xx_43xx_common_data.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 2a78b093c0ce..11468eea3871 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -18,6 +18,7 @@ #include <linux/i2c-omap.h> #include <linux/power/smartreflex.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/omap-dma.h> #include "l3_3xxx.h" @@ -37,7 +38,6 @@ #include "cm-regbits-34xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "serial.h" @@ -1786,12 +1786,12 @@ static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = { { .role = "dbck", .clk = "omap_32k_fck", }, }; -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; /* See 35xx errata 2.1.1.128 in SPRZ278F */ -static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = { .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT | OMAP_HSMMC_BROKEN_MULTIBLOCK_READ), }; @@ -1854,7 +1854,7 @@ static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = { }; /* See 35xx errata 2.1.1.128 in SPRZ278F */ -static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = { +static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = { .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 44e5634bba34..d8a3cf1c1787 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -22,6 +22,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> #include <linux/i2c-omap.h> @@ -39,7 +40,6 @@ #include "prm44xx.h" #include "prm-regbits-44xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ @@ -1952,7 +1952,7 @@ static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = { }; /* mmc1 dev_attr */ -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index 1103aa0e0d29..5ec786a76d3c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> #include <linux/i2c-omap.h> @@ -33,7 +34,6 @@ #include "cm2_54xx.h" #include "prm54xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP5 interrupts external to MPUSS */ @@ -1269,7 +1269,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { }; /* mmc1 dev_attr */ -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 5684f112654b..711c97e90990 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/platform_data/gpio-omap.h> +#include <linux/platform_data/hsmmc-omap.h> #include <linux/power/smartreflex.h> #include <linux/i2c-omap.h> @@ -33,7 +34,6 @@ #include "cm2_7xx.h" #include "prm7xx.h" #include "i2c.h" -#include "mmc.h" #include "wd_timer.h" #include "soc.h" @@ -1301,7 +1301,7 @@ static struct omap_hwmod_opt_clk mmc1_opt_clks[] = { }; /* mmc1 dev_attr */ -static struct omap_mmc_dev_attr mmc1_dev_attr = { +static struct omap_hsmmc_dev_attr mmc1_dev_attr = { .flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT, }; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 37b75602adf6..cc92cdb9994c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -17,7 +17,7 @@ #include <linux/spi/spi.h> #include <linux/usb/atmel_usba_udc.h> -#include <mach/atmel-mci.h> +#include <linux/platform_data/mmc-atmel-mci.h> #include <linux/atmel-mci.h> #include <asm/io.h> diff --git a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h b/arch/avr32/mach-at32ap/include/mach/atmel-mci.h deleted file mode 100644 index 11d7f4b28dc8..000000000000 --- a/arch/avr32/mach-at32ap/include/mach/atmel-mci.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef __MACH_ATMEL_MCI_H -#define __MACH_ATMEL_MCI_H - -#include <linux/platform_data/dma-dw.h> - -/** - * struct mci_dma_data - DMA data for MCI interface - */ -struct mci_dma_data { - struct dw_dma_slave sdata; -}; - -/* accessor macros */ -#define slave_data_ptr(s) (&(s)->sdata) -#define find_slave_dev(s) ((s)->sdata.dma_dev) - -#endif /* __MACH_ATMEL_MCI_H */ diff --git a/arch/powerpc/platforms/powernv/opal-sensor.c b/arch/powerpc/platforms/powernv/opal-sensor.c index 10271ad1fac4..4ab67ef7abc9 100644 --- a/arch/powerpc/platforms/powernv/opal-sensor.c +++ b/arch/powerpc/platforms/powernv/opal-sensor.c @@ -20,7 +20,9 @@ #include <linux/delay.h> #include <linux/mutex.h> +#include <linux/of_platform.h> #include <asm/opal.h> +#include <asm/machdep.h> static DEFINE_MUTEX(opal_sensor_mutex); @@ -64,3 +66,21 @@ out: return ret; } EXPORT_SYMBOL_GPL(opal_get_sensor_data); + +static __init int opal_sensor_init(void) +{ + struct platform_device *pdev; + struct device_node *sensor; + + sensor = of_find_node_by_path("/ibm,opal/sensors"); + if (!sensor) { + pr_err("Opal node 'sensors' not found\n"); + return -ENODEV; + } + + pdev = of_platform_device_create(sensor, "opal-sensor", NULL); + of_node_put(sensor); + + return PTR_ERR_OR_ZERO(pdev); +} +machine_subsys_initcall(powernv, opal_sensor_init); diff --git a/arch/s390/kernel/nmi.c b/arch/s390/kernel/nmi.c index dd1c24ceda50..3f51cf4e8f02 100644 --- a/arch/s390/kernel/nmi.c +++ b/arch/s390/kernel/nmi.c @@ -54,12 +54,8 @@ void s390_handle_mcck(void) */ local_irq_save(flags); local_mcck_disable(); - /* - * Ummm... Does this make sense at all? Copying the percpu struct - * and then zapping it one statement later? - */ - memcpy(&mcck, this_cpu_ptr(&cpu_mcck), sizeof(mcck)); - memset(&mcck, 0, sizeof(struct mcck_struct)); + mcck = *this_cpu_ptr(&cpu_mcck); + memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck)); clear_cpu_flag(CIF_MCCK_PENDING); local_mcck_enable(); local_irq_restore(flags); diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index be1e07d4b596..45abc363dd3e 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -76,7 +76,7 @@ suffix-$(CONFIG_KERNEL_XZ) := xz suffix-$(CONFIG_KERNEL_LZO) := lzo suffix-$(CONFIG_KERNEL_LZ4) := lz4 -RUN_SIZE = $(shell objdump -h vmlinux | \ +RUN_SIZE = $(shell $(OBJDUMP) -h vmlinux | \ perl $(srctree)/arch/x86/tools/calc_run_size.pl) quiet_cmd_mkpiggy = MKPIGGY $@ cmd_mkpiggy = $(obj)/mkpiggy $< $(RUN_SIZE) > $@ || ( rm -f $@ ; false ) diff --git a/arch/x86/kernel/amd_nb.c b/arch/x86/kernel/amd_nb.c index f04dbb3069b8..5caed1dd7ccf 100644 --- a/arch/x86/kernel/amd_nb.c +++ b/arch/x86/kernel/amd_nb.c @@ -21,6 +21,7 @@ const struct pci_device_id amd_nb_misc_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) }, {} @@ -30,6 +31,7 @@ EXPORT_SYMBOL(amd_nb_misc_ids); static const struct pci_device_id amd_nb_link_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) }, {} diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c index 2ce9051174e6..08fe6e8a726e 100644 --- a/arch/x86/kernel/cpu/microcode/core.c +++ b/arch/x86/kernel/cpu/microcode/core.c @@ -465,6 +465,7 @@ static void mc_bp_resume(void) if (uci->valid && uci->mc) microcode_ops->apply_microcode(cpu); +#ifdef CONFIG_X86_64 else if (!uci->mc) /* * We might resume and not have applied late microcode but still @@ -473,6 +474,7 @@ static void mc_bp_resume(void) * applying patches early on the APs. */ load_ucode_ap(); +#endif } static struct syscore_ops mc_syscore_ops = { |