diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/openrisc/Kconfig | 53 | ||||
| -rw-r--r-- | arch/openrisc/Makefile | 17 | ||||
| -rw-r--r-- | arch/openrisc/configs/or1klitex_defconfig | 32 | ||||
| -rw-r--r-- | arch/openrisc/kernel/entry.S | 20 | ||||
| -rw-r--r-- | arch/openrisc/kernel/head.S | 368 | ||||
| -rw-r--r-- | arch/openrisc/kernel/process.c | 19 | ||||
| -rw-r--r-- | arch/openrisc/kernel/time.c | 3 | ||||
| -rw-r--r-- | arch/openrisc/kernel/traps.c | 63 | ||||
| -rw-r--r-- | arch/openrisc/lib/delay.c | 1 | ||||
| -rw-r--r-- | arch/openrisc/mm/fault.c | 9 | ||||
| -rw-r--r-- | arch/openrisc/mm/tlb.c | 2 |
11 files changed, 272 insertions, 315 deletions
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig index 99f0e4a4cbbd..e814df4c483c 100644 --- a/arch/openrisc/Kconfig +++ b/arch/openrisc/Kconfig @@ -113,6 +113,59 @@ config OPENRISC_HAVE_INST_DIV default y help Select this if your implementation has a hardware divide instruction + +config OPENRISC_HAVE_INST_CMOV + bool "Have instruction l.cmov for conditional move" + default n + help + This config enables gcc to generate l.cmov instructions when compiling + the kernel which in general will improve performance and reduce the + binary size. + + Select this if your implementation has support for the Class II + l.cmov conistional move instruction. + + Say N if you are unsure. + +config OPENRISC_HAVE_INST_ROR + bool "Have instruction l.ror for rotate right" + default n + help + This config enables gcc to generate l.ror instructions when compiling + the kernel which in general will improve performance and reduce the + binary size. + + Select this if your implementation has support for the Class II + l.ror rotate right instruction. + + Say N if you are unsure. + +config OPENRISC_HAVE_INST_RORI + bool "Have instruction l.rori for rotate right with immediate" + default n + help + This config enables gcc to generate l.rori instructions when compiling + the kernel which in general will improve performance and reduce the + binary size. + + Select this if your implementation has support for the Class II + l.rori rotate right with immediate instruction. + + Say N if you are unsure. + +config OPENRISC_HAVE_INST_SEXT + bool "Have instructions l.ext* for sign extension" + default n + help + This config enables gcc to generate l.ext* instructions when compiling + the kernel which in general will improve performance and reduce the + binary size. + + Select this if your implementation has support for the Class II + l.exths, l.extbs, l.exthz and l.extbz size extend instructions. + + Say N if you are unsure. + endmenu config NR_CPUS diff --git a/arch/openrisc/Makefile b/arch/openrisc/Makefile index 760b734fb822..b446510173cd 100644 --- a/arch/openrisc/Makefile +++ b/arch/openrisc/Makefile @@ -21,6 +21,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -S LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) KBUILD_CFLAGS += -pipe -ffixed-r10 -D__linux__ +KBUILD_CFLAGS += -msfimm -mshftimm all: vmlinux.bin @@ -38,6 +39,22 @@ else KBUILD_CFLAGS += $(call cc-option,-msoft-div) endif +ifeq ($(CONFIG_OPENRISC_HAVE_INST_CMOV),y) + KBUILD_CFLAGS += $(call cc-option,-mcmov) +endif + +ifeq ($(CONFIG_OPENRISC_HAVE_INST_ROR),y) + KBUILD_CFLAGS += $(call cc-option,-mror) +endif + +ifeq ($(CONFIG_OPENRISC_HAVE_INST_RORI),y) + KBUILD_CFLAGS += $(call cc-option,-mrori) +endif + +ifeq ($(CONFIG_OPENRISC_HAVE_INST_SEXT),y) + KBUILD_CFLAGS += $(call cc-option,-msext) +endif + head-y := arch/openrisc/kernel/head.o libs-y += $(LIBGCC) diff --git a/arch/openrisc/configs/or1klitex_defconfig b/arch/openrisc/configs/or1klitex_defconfig index d695879a4d26..d3fb964b4f85 100644 --- a/arch/openrisc/configs/or1klitex_defconfig +++ b/arch/openrisc/configs/or1klitex_defconfig @@ -1,22 +1,54 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_CGROUPS=y +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SGETMASK_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_OPENRISC_BUILTIN_DTB="or1klitex" CONFIG_HZ_100=y +CONFIG_OPENRISC_HAVE_SHADOW_GPRS=y CONFIG_NET=y CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y CONFIG_UNIX=y +CONFIG_UNIX_DIAG=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_INET_UDP_DIAG=y +CONFIG_INET_RAW_DIAG=y +# CONFIG_WIRELESS is not set +# CONFIG_ETHTOOL_NETLINK is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_OF_OVERLAY=y CONFIG_NETDEVICES=y CONFIG_LITEX_LITEETH=y +# CONFIG_WLAN is not set CONFIG_SERIAL_LITEUART=y CONFIG_SERIAL_LITEUART_CONSOLE=y CONFIG_TTY_PRINTK=y +# CONFIG_GPIO_CDEV is not set +CONFIG_MMC=y +CONFIG_MMC_LITEX=y +# CONFIG_VHOST_MENU is not set +# CONFIG_IOMMU_SUPPORT is not set CONFIG_LITEX_SOC_CONTROLLER=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_EXFAT_FS=y CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,bpf" CONFIG_PRINTK_TIME=y CONFIG_PANIC_ON_OOPS=y CONFIG_SOFTLOCKUP_DETECTOR=y diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index 3ca1b1f490b9..54a87bba35ca 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -601,7 +601,7 @@ UNHANDLED_EXCEPTION(_vector_0xb00,0xb00) */ _string_syscall_return: - .string "syscall return %ld \n\r\0" + .string "syscall r9:0x%08x -> syscall(%ld) return %ld\0" .align 4 ENTRY(_sys_call_handler) @@ -679,15 +679,25 @@ _syscall_return: _syscall_debug: l.movhi r3,hi(_string_syscall_return) l.ori r3,r3,lo(_string_syscall_return) - l.ori r27,r0,1 + l.ori r27,r0,2 l.sw -4(r1),r27 l.sw -8(r1),r11 - l.addi r1,r1,-8 + l.lwz r29,PT_ORIG_GPR11(r1) + l.sw -12(r1),r29 + l.lwz r29,PT_GPR9(r1) + l.sw -16(r1),r29 l.movhi r27,hi(_printk) l.ori r27,r27,lo(_printk) l.jalr r27 - l.nop - l.addi r1,r1,8 + l.addi r1,r1,-16 + l.addi r1,r1,16 +#endif +#if 0 +_syscall_show_regs: + l.movhi r27,hi(show_registers) + l.ori r27,r27,lo(show_registers) + l.jalr r27 + l.or r3,r1,r1 #endif _syscall_check_trace_leave: diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S index 2fa6cefa62ca..e11699f3d6bd 100644 --- a/arch/openrisc/kernel/head.S +++ b/arch/openrisc/kernel/head.S @@ -297,19 +297,23 @@ /* temporary store r3, r9 into r1, r10 */ ;\ l.addi r1,r3,0x0 ;\ l.addi r10,r9,0x0 ;\ - /* the string referenced by r3 must be low enough */ ;\ + LOAD_SYMBOL_2_GPR(r9,_string_unhandled_exception) ;\ + tophys (r3,r9) ;\ l.jal _emergency_print ;\ - l.ori r3,r0,lo(_string_unhandled_exception) ;\ + l.nop ;\ l.mfspr r3,r0,SPR_NPC ;\ l.jal _emergency_print_nr ;\ - l.andi r3,r3,0x1f00 ;\ - /* the string referenced by r3 must be low enough */ ;\ + l.andi r3,r3,0x1f00 ;\ + LOAD_SYMBOL_2_GPR(r9,_string_epc_prefix) ;\ + tophys (r3,r9) ;\ l.jal _emergency_print ;\ - l.ori r3,r0,lo(_string_epc_prefix) ;\ + l.nop ;\ l.jal _emergency_print_nr ;\ - l.mfspr r3,r0,SPR_EPCR_BASE ;\ + l.mfspr r3,r0,SPR_EPCR_BASE ;\ + LOAD_SYMBOL_2_GPR(r9,_string_nl) ;\ + tophys (r3,r9) ;\ l.jal _emergency_print ;\ - l.ori r3,r0,lo(_string_nl) ;\ + l.nop ;\ /* end of printing */ ;\ l.addi r3,r1,0x0 ;\ l.addi r9,r10,0x0 ;\ @@ -1330,274 +1334,110 @@ i_pte_not_present: /* =================================================[ debugging aids ]=== */ - .align 64 -_immu_trampoline: - .space 64 -_immu_trampoline_top: - -#define TRAMP_SLOT_0 (0x0) -#define TRAMP_SLOT_1 (0x4) -#define TRAMP_SLOT_2 (0x8) -#define TRAMP_SLOT_3 (0xc) -#define TRAMP_SLOT_4 (0x10) -#define TRAMP_SLOT_5 (0x14) -#define TRAMP_FRAME_SIZE (0x18) - -ENTRY(_immu_trampoline_workaround) - // r2 EEA - // r6 is physical EEA - tophys(r6,r2) - - LOAD_SYMBOL_2_GPR(r5,_immu_trampoline) - tophys (r3,r5) // r3 is trampoline (physical) - - LOAD_SYMBOL_2_GPR(r4,0x15000000) - l.sw TRAMP_SLOT_0(r3),r4 - l.sw TRAMP_SLOT_1(r3),r4 - l.sw TRAMP_SLOT_4(r3),r4 - l.sw TRAMP_SLOT_5(r3),r4 - - // EPC = EEA - 0x4 - l.lwz r4,0x0(r6) // load op @ EEA + 0x0 (fc address) - l.sw TRAMP_SLOT_3(r3),r4 // store it to _immu_trampoline_data - l.lwz r4,-0x4(r6) // load op @ EEA - 0x4 (f8 address) - l.sw TRAMP_SLOT_2(r3),r4 // store it to _immu_trampoline_data - - l.srli r5,r4,26 // check opcode for write access - l.sfeqi r5,0 // l.j - l.bf 0f - l.sfeqi r5,0x11 // l.jr - l.bf 1f - l.sfeqi r5,1 // l.jal - l.bf 2f - l.sfeqi r5,0x12 // l.jalr - l.bf 3f - l.sfeqi r5,3 // l.bnf - l.bf 4f - l.sfeqi r5,4 // l.bf - l.bf 5f -99: - l.nop - l.j 99b // should never happen - l.nop 1 - - // r2 is EEA - // r3 is trampoline address (physical) - // r4 is instruction - // r6 is physical(EEA) - // - // r5 - -2: // l.jal - - /* 19 20 aa aa l.movhi r9,0xaaaa - * a9 29 bb bb l.ori r9,0xbbbb - * - * where 0xaaaabbbb is EEA + 0x4 shifted right 2 - */ - - l.addi r6,r2,0x4 // this is 0xaaaabbbb - - // l.movhi r9,0xaaaa - l.ori r5,r0,0x1920 // 0x1920 == l.movhi r9 - l.sh (TRAMP_SLOT_0+0x0)(r3),r5 - l.srli r5,r6,16 - l.sh (TRAMP_SLOT_0+0x2)(r3),r5 - - // l.ori r9,0xbbbb - l.ori r5,r0,0xa929 // 0xa929 == l.ori r9 - l.sh (TRAMP_SLOT_1+0x0)(r3),r5 - l.andi r5,r6,0xffff - l.sh (TRAMP_SLOT_1+0x2)(r3),r5 - - /* falthrough, need to set up new jump offset */ - - -0: // l.j - l.slli r6,r4,6 // original offset shifted left 6 - 2 -// l.srli r6,r6,6 // original offset shifted right 2 - - l.slli r4,r2,4 // old jump position: EEA shifted left 4 -// l.srli r4,r4,6 // old jump position: shifted right 2 - - l.addi r5,r3,0xc // new jump position (physical) - l.slli r5,r5,4 // new jump position: shifted left 4 - - // calculate new jump offset - // new_off = old_off + (old_jump - new_jump) - - l.sub r5,r4,r5 // old_jump - new_jump - l.add r5,r6,r5 // orig_off + (old_jump - new_jump) - l.srli r5,r5,6 // new offset shifted right 2 - - // r5 is new jump offset - // l.j has opcode 0x0... - l.sw TRAMP_SLOT_2(r3),r5 // write it back - - l.j trampoline_out - l.nop - -/* ----------------------------- */ - -3: // l.jalr - - /* 19 20 aa aa l.movhi r9,0xaaaa - * a9 29 bb bb l.ori r9,0xbbbb - * - * where 0xaaaabbbb is EEA + 0x4 shifted right 2 - */ - - l.addi r6,r2,0x4 // this is 0xaaaabbbb - - // l.movhi r9,0xaaaa - l.ori r5,r0,0x1920 // 0x1920 == l.movhi r9 - l.sh (TRAMP_SLOT_0+0x0)(r3),r5 - l.srli r5,r6,16 - l.sh (TRAMP_SLOT_0+0x2)(r3),r5 - - // l.ori r9,0xbbbb - l.ori r5,r0,0xa929 // 0xa929 == l.ori r9 - l.sh (TRAMP_SLOT_1+0x0)(r3),r5 - l.andi r5,r6,0xffff - l.sh (TRAMP_SLOT_1+0x2)(r3),r5 - - l.lhz r5,(TRAMP_SLOT_2+0x0)(r3) // load hi part of jump instruction - l.andi r5,r5,0x3ff // clear out opcode part - l.ori r5,r5,0x4400 // opcode changed from l.jalr -> l.jr - l.sh (TRAMP_SLOT_2+0x0)(r3),r5 // write it back - - /* falthrough */ - -1: // l.jr - l.j trampoline_out - l.nop - -/* ----------------------------- */ - -4: // l.bnf -5: // l.bf - l.slli r6,r4,6 // original offset shifted left 6 - 2 -// l.srli r6,r6,6 // original offset shifted right 2 - - l.slli r4,r2,4 // old jump position: EEA shifted left 4 -// l.srli r4,r4,6 // old jump position: shifted right 2 - - l.addi r5,r3,0xc // new jump position (physical) - l.slli r5,r5,4 // new jump position: shifted left 4 - - // calculate new jump offset - // new_off = old_off + (old_jump - new_jump) - - l.add r6,r6,r4 // (orig_off + old_jump) - l.sub r6,r6,r5 // (orig_off + old_jump) - new_jump - l.srli r6,r6,6 // new offset shifted right 2 - - // r6 is new jump offset - l.lwz r4,(TRAMP_SLOT_2+0x0)(r3) // load jump instruction - l.srli r4,r4,16 - l.andi r4,r4,0xfc00 // get opcode part - l.slli r4,r4,16 - l.or r6,r4,r6 // l.b(n)f new offset - l.sw TRAMP_SLOT_2(r3),r6 // write it back - - /* we need to add l.j to EEA + 0x8 */ - tophys (r4,r2) // may not be needed (due to shifts down_ - l.addi r4,r4,(0x8 - 0x8) // jump target = r2 + 0x8 (compensate for 0x8) - // jump position = r5 + 0x8 (0x8 compensated) - l.sub r4,r4,r5 // jump offset = target - new_position + 0x8 - - l.slli r4,r4,4 // the amount of info in imediate of jump - l.srli r4,r4,6 // jump instruction with offset - l.sw TRAMP_SLOT_4(r3),r4 // write it to 4th slot - - /* fallthrough */ - -trampoline_out: - // set up new EPC to point to our trampoline code - LOAD_SYMBOL_2_GPR(r5,_immu_trampoline) - l.mtspr r0,r5,SPR_EPCR_BASE - - // immu_trampoline is (4x) CACHE_LINE aligned - // and only 6 instructions long, - // so we need to invalidate only 2 lines - - /* Establish cache block size - If BS=0, 16; - If BS=1, 32; - r14 contain block size - */ - l.mfspr r21,r0,SPR_ICCFGR - l.andi r21,r21,SPR_ICCFGR_CBS - l.srli r21,r21,7 - l.ori r23,r0,16 - l.sll r14,r23,r21 - - l.mtspr r0,r5,SPR_ICBIR - l.add r5,r5,r14 - l.mtspr r0,r5,SPR_ICBIR - - l.jr r9 - l.nop - - /* - * DSCR: prints a string referenced by r3. + * DESC: Prints ASCII character stored in r7 * - * PRMS: r3 - address of the first character of null - * terminated string to be printed + * PRMS: r7 - a 32-bit value with an ASCII character in the first byte + * position. * - * PREQ: UART at UART_BASE_ADD has to be initialized + * PREQ: The UART at UART_BASE_ADD has to be initialized * - * POST: caller should be aware that r3, r9 are changed + * POST: internally used but restores: + * r4 - to store UART_BASE_ADD + * r5 - for loading OFF_TXFULL / THRE,TEMT + * r6 - for storing bitmask (SERIAL_8250) */ -ENTRY(_emergency_print) +ENTRY(_emergency_putc) EMERGENCY_PRINT_STORE_GPR4 EMERGENCY_PRINT_STORE_GPR5 EMERGENCY_PRINT_STORE_GPR6 - EMERGENCY_PRINT_STORE_GPR7 -2: - l.lbz r7,0(r3) - l.sfeq r7,r0 - l.bf 9f - l.nop -// putc: l.movhi r4,hi(UART_BASE_ADD) + l.ori r4,r4,lo(UART_BASE_ADD) + +#if defined(CONFIG_SERIAL_LITEUART) + /* Check OFF_TXFULL status */ +1: l.lwz r5,4(r4) + l.andi r5,r5,0xff + l.sfnei r5,0 + l.bf 1b + l.nop + /* Write character */ + l.andi r7,r7,0xff + l.sw 0(r4),r7 +#elif defined(CONFIG_SERIAL_8250) + /* Check UART LSR THRE (hold) bit */ l.addi r6,r0,0x20 1: l.lbz r5,5(r4) l.andi r5,r5,0x20 l.sfeq r5,r6 l.bnf 1b - l.nop + l.nop + /* Write character */ l.sb 0(r4),r7 + /* Check UART LSR THRE|TEMT (hold, empty) bits */ l.addi r6,r0,0x60 1: l.lbz r5,5(r4) l.andi r5,r5,0x60 l.sfeq r5,r6 l.bnf 1b - l.nop + l.nop +#endif + EMERGENCY_PRINT_LOAD_GPR6 + EMERGENCY_PRINT_LOAD_GPR5 + EMERGENCY_PRINT_LOAD_GPR4 + l.jr r9 + l.nop + +/* + * DSCR: prints a string referenced by r3. + * + * PRMS: r3 - address of the first character of null + * terminated string to be printed + * + * PREQ: UART at UART_BASE_ADD has to be initialized + * + * POST: caller should be aware that r3, r9 are changed + */ +ENTRY(_emergency_print) + EMERGENCY_PRINT_STORE_GPR7 + EMERGENCY_PRINT_STORE_GPR9 + + /* Load character to r7, check for null terminator */ +2: l.lbz r7,0(r3) + l.sfeqi r7,0x0 + l.bf 9f + l.nop + + l.jal _emergency_putc + l.nop /* next character */ l.j 2b - l.addi r3,r3,0x1 + l.addi r3,r3,0x1 9: + EMERGENCY_PRINT_LOAD_GPR9 EMERGENCY_PRINT_LOAD_GPR7 - EMERGENCY_PRINT_LOAD_GPR6 - EMERGENCY_PRINT_LOAD_GPR5 - EMERGENCY_PRINT_LOAD_GPR4 l.jr r9 - l.nop + l.nop +/* + * DSCR: prints a number in r3 in hex. + * + * PRMS: r3 - a 32-bit unsigned integer + * + * PREQ: UART at UART_BASE_ADD has to be initialized + * + * POST: caller should be aware that r3, r9 are changed + */ ENTRY(_emergency_print_nr) - EMERGENCY_PRINT_STORE_GPR4 - EMERGENCY_PRINT_STORE_GPR5 - EMERGENCY_PRINT_STORE_GPR6 EMERGENCY_PRINT_STORE_GPR7 EMERGENCY_PRINT_STORE_GPR8 + EMERGENCY_PRINT_STORE_GPR9 l.addi r8,r0,32 // shift register @@ -1609,58 +1449,39 @@ ENTRY(_emergency_print_nr) /* don't skip the last zero if number == 0x0 */ l.sfeqi r8,0x4 l.bf 2f - l.nop + l.nop l.sfeq r7,r0 l.bf 1b - l.nop + l.nop 2: l.srl r7,r3,r8 l.andi r7,r7,0xf l.sflts r8,r0 - l.bf 9f + l.bf 9f + /* Numbers greater than 9 translate to a-f */ l.sfgtui r7,0x9 l.bnf 8f - l.nop + l.nop l.addi r7,r7,0x27 -8: - l.addi r7,r7,0x30 -// putc: - l.movhi r4,hi(UART_BASE_ADD) - - l.addi r6,r0,0x20 -1: l.lbz r5,5(r4) - l.andi r5,r5,0x20 - l.sfeq r5,r6 - l.bnf 1b - l.nop - - l.sb 0(r4),r7 - - l.addi r6,r0,0x60 -1: l.lbz r5,5(r4) - l.andi r5,r5,0x60 - l.sfeq r5,r6 - l.bnf 1b - l.nop + /* Convert to ascii and output character */ +8: l.jal _emergency_putc + l.addi r7,r7,0x30 /* next character */ l.j 2b l.addi r8,r8,-0x4 9: + EMERGENCY_PRINT_LOAD_GPR9 EMERGENCY_PRINT_LOAD_GPR8 EMERGENCY_PRINT_LOAD_GPR7 - EMERGENCY_PRINT_LOAD_GPR6 - EMERGENCY_PRINT_LOAD_GPR5 - EMERGENCY_PRINT_LOAD_GPR4 l.jr r9 - l.nop - + l.nop /* * This should be used for debugging only. @@ -1685,7 +1506,9 @@ ENTRY(_emergency_print_nr) ENTRY(_early_uart_init) l.movhi r3,hi(UART_BASE_ADD) + l.ori r3,r3,lo(UART_BASE_ADD) +#if defined(CONFIG_SERIAL_8250) l.addi r4,r0,0x7 l.sb 0x2(r3),r4 @@ -1703,9 +1526,10 @@ ENTRY(_early_uart_init) l.addi r4,r0,((UART_DIVISOR) & 0x000000ff) l.sb UART_DLL(r3),r4 l.sb 0x3(r3),r5 +#endif l.jr r9 - l.nop + l.nop .align 0x1000 .global _secondary_evbar @@ -1720,13 +1544,13 @@ _secondary_evbar: .section .rodata _string_unhandled_exception: - .string "\n\rRunarunaround: Unhandled exception 0x\0" + .string "\r\nRunarunaround: Unhandled exception 0x\0" _string_epc_prefix: .string ": EPC=0x\0" _string_nl: - .string "\n\r\0" + .string "\r\n\0" /* ========================================[ page aligned structures ]=== */ diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c index 3c0c91bcdcba..1d4c0921aafa 100644 --- a/arch/openrisc/kernel/process.c +++ b/arch/openrisc/kernel/process.c @@ -52,6 +52,8 @@ void machine_restart(char *cmd) { do_kernel_restart(cmd); + __asm__("l.nop 13"); + /* Give a grace period for failure to restart of 1s */ mdelay(1000); @@ -61,6 +63,16 @@ void machine_restart(char *cmd) } /* + * This is used if pm_power_off has not been set by a power management + * driver, in this case we can assume we are on a simulator. On + * OpenRISC simulators l.nop 1 will trigger the simulator exit. + */ +static void default_power_off(void) +{ + __asm__("l.nop 1"); +} + +/* * Similar to machine_power_off, but don't shut off power. Add code * here to freeze the system for e.g. post-mortem debug purpose when * possible. This halt has nothing to do with the idle halt. @@ -75,7 +87,10 @@ void machine_halt(void) void machine_power_off(void) { printk(KERN_INFO "*** MACHINE POWER OFF ***\n"); - __asm__("l.nop 1"); + if (pm_power_off != NULL) + pm_power_off(); + else + default_power_off(); } /* @@ -89,7 +104,7 @@ void arch_cpu_idle(void) mtspr(SPR_PMR, mfspr(SPR_PMR) | SPR_PMR_DME); } -void (*pm_power_off) (void) = machine_power_off; +void (*pm_power_off)(void) = NULL; EXPORT_SYMBOL(pm_power_off); /* diff --git a/arch/openrisc/kernel/time.c b/arch/openrisc/kernel/time.c index 6d18989d63d0..8e26c1af5441 100644 --- a/arch/openrisc/kernel/time.c +++ b/arch/openrisc/kernel/time.c @@ -23,6 +23,7 @@ #include <linux/of_clk.h> #include <asm/cpuinfo.h> +#include <asm/time.h> /* Test the timer ticks to count, used in sync routine */ inline void openrisc_timer_set(unsigned long count) @@ -61,7 +62,7 @@ static int openrisc_timer_set_next_event(unsigned long delta, * timers) we cannot enable the PERIODIC feature. The tick timer can run using * one-shot events, so no problem. */ -DEFINE_PER_CPU(struct clock_event_device, clockevent_openrisc_timer); +static DEFINE_PER_CPU(struct clock_event_device, clockevent_openrisc_timer); void openrisc_clockevent_init(void) { diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c index 0446a3c34372..fd9a0f2b66c4 100644 --- a/arch/openrisc/kernel/traps.c +++ b/arch/openrisc/kernel/traps.c @@ -34,11 +34,11 @@ #include <asm/unwinder.h> #include <asm/sections.h> -int kstack_depth_to_print = 0x180; +static int kstack_depth_to_print = 0x180; int lwa_flag; -unsigned long __user *lwa_addr; +static unsigned long __user *lwa_addr; -void print_trace(void *data, unsigned long addr, int reliable) +static void print_trace(void *data, unsigned long addr, int reliable) { const char *loglvl = data; @@ -46,6 +46,14 @@ void print_trace(void *data, unsigned long addr, int reliable) (void *) addr); } +static void print_data(unsigned long base_addr, unsigned long word, int i) +{ + if (i == 0) + printk("(%08lx:)\t%08lx", base_addr + (i * 4), word); + else + printk(" %08lx:\t%08lx", base_addr + (i * 4), word); +} + /* displays a short stack trace */ void show_stack(struct task_struct *task, unsigned long *esp, const char *loglvl) { @@ -99,22 +107,36 @@ void show_registers(struct pt_regs *regs) printk("\nStack: "); show_stack(NULL, (unsigned long *)esp, KERN_EMERG); + if (esp < PAGE_OFFSET) + goto bad_stack; + + printk("\n"); + for (i = -8; i < 24; i += 1) { + unsigned long word; + + if (__get_user(word, &((unsigned long *)esp)[i])) { +bad_stack: + printk(" Bad Stack value."); + break; + } + + print_data(esp, word, i); + } + printk("\nCode: "); if (regs->pc < PAGE_OFFSET) goto bad; - for (i = -24; i < 24; i++) { - unsigned char c; - if (__get_user(c, &((unsigned char *)regs->pc)[i])) { + for (i = -6; i < 6; i += 1) { + unsigned long word; + + if (__get_user(word, &((unsigned long *)regs->pc)[i])) { bad: printk(" Bad PC value."); break; } - if (i == 0) - printk("(%02x) ", c); - else - printk("%02x ", c); + print_data(regs->pc, word, i); } } printk("\n"); @@ -185,13 +207,11 @@ void nommu_dump_state(struct pt_regs *regs, printk("\nCode: "); for (i = -24; i < 24; i++) { - unsigned char c; - c = ((unsigned char *)(__pa(regs->pc)))[i]; + unsigned long word; + + word = ((unsigned long *)(__pa(regs->pc)))[i]; - if (i == 0) - printk("(%02x) ", c); - else - printk("%02x ", c); + print_data(regs->pc, word, i); } printk("\n"); } @@ -215,16 +235,7 @@ void __noreturn die(const char *str, struct pt_regs *regs, long err) make_task_dead(SIGSEGV); } -/* This is normally the 'Oops' routine */ -void die_if_kernel(const char *str, struct pt_regs *regs, long err) -{ - if (user_mode(regs)) - return; - - die(str, regs, err); -} - -void unhandled_exception(struct pt_regs *regs, int ea, int vector) +asmlinkage void unhandled_exception(struct pt_regs *regs, int ea, int vector) { printk("Unable to handle exception at EA =0x%x, vector 0x%x", ea, vector); diff --git a/arch/openrisc/lib/delay.c b/arch/openrisc/lib/delay.c index 036ae57180ef..5e89e4131304 100644 --- a/arch/openrisc/lib/delay.c +++ b/arch/openrisc/lib/delay.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/export.h> #include <linux/init.h> +#include <linux/timex.h> #include <asm/param.h> #include <asm/delay.h> #include <asm/timex.h> diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c index 80bb66ad42f6..53b760af3bb7 100644 --- a/arch/openrisc/mm/fault.c +++ b/arch/openrisc/mm/fault.c @@ -18,15 +18,13 @@ #include <linux/perf_event.h> #include <linux/uaccess.h> +#include <asm/mmu_context.h> #include <asm/siginfo.h> #include <asm/signal.h> #define NUM_TLB_ENTRIES 64 #define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1)) -unsigned long pte_misses; /* updated by do_page_fault() */ -unsigned long pte_errors; /* updated by do_page_fault() */ - /* __PHX__ :: - check the vmalloc_fault in do_page_fault() * - also look into include/asm/mmu_context.h */ @@ -223,8 +221,6 @@ no_context: { const struct exception_table_entry *entry; - __asm__ __volatile__("l.nop 42"); - if ((entry = search_exception_tables(regs->pc)) != NULL) { /* Adjust the instruction pointer in the stackframe */ regs->pc = entry->fixup; @@ -252,9 +248,6 @@ no_context: */ out_of_memory: - __asm__ __volatile__("l.nop 42"); - __asm__ __volatile__("l.nop 1"); - mmap_read_unlock(mm); if (!user_mode(regs)) goto no_context; diff --git a/arch/openrisc/mm/tlb.c b/arch/openrisc/mm/tlb.c index 2b6feabf6381..e2f2a3c3bb22 100644 --- a/arch/openrisc/mm/tlb.c +++ b/arch/openrisc/mm/tlb.c @@ -128,7 +128,7 @@ void local_flush_tlb_mm(struct mm_struct *mm) /* Was seeing bugs with the mm struct passed to us. Scrapped most of this function. */ - /* Several architctures do this */ + /* Several architectures do this */ local_flush_tlb_all(); } |