diff options
Diffstat (limited to 'arch')
55 files changed, 347 insertions, 154 deletions
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 1467750e3377..e8c6c600a5b6 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -953,6 +953,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "lcdc_clk", "hclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 28e7e2060c33..a98ac1bd8f65 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -65,6 +65,8 @@ }; &sdhci2 { + broken-cd; + bus-width = <8>; non-removable; status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 35253c947a7c..e2f61f27944e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -83,7 +83,8 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clock-names = "io", "core"; status = "disabled"; }; @@ -348,36 +349,6 @@ interrupt-parent = <&gic>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; }; - - gpio4: gpio@5000 { - compatible = "snps,dw-apb-gpio"; - reg = <0x5000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - porte: gpio-port@4 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; - - gpio5: gpio@c000 { - compatible = "snps,dw-apb-gpio"; - reg = <0xc000 0x400>; - #address-cells = <1>; - #size-cells = <0>; - - portf: gpio-port@5 { - compatible = "snps,dw-apb-gpio-port"; - gpio-controller; - #gpio-cells = <2>; - snps,nr-gpios = <32>; - reg = <0>; - }; - }; }; chip: chip-control@ea0000 { @@ -466,6 +437,21 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + sm_gpio1: gpio@5000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x5000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + i2c2: i2c@7000 { compatible = "snps,designware-i2c"; #address-cells = <1>; @@ -516,6 +502,21 @@ status = "disabled"; }; + sm_gpio0: gpio@c000 { + compatible = "snps,dw-apb-gpio"; + reg = <0xc000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + sysctrl: pin-controller@d000 { compatible = "marvell,berlin2q-system-ctrl"; reg = <0xd000 0x100>; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 10b725c7bfc0..ad4118f7e1a6 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -499,23 +499,23 @@ }; partition@5 { label = "QSPI.u-boot-spl-os"; - reg = <0x00140000 0x00010000>; + reg = <0x00140000 0x00080000>; }; partition@6 { label = "QSPI.u-boot-env"; - reg = <0x00150000 0x00010000>; + reg = <0x001c0000 0x00010000>; }; partition@7 { label = "QSPI.u-boot-env.backup1"; - reg = <0x00160000 0x0010000>; + reg = <0x001d0000 0x0010000>; }; partition@8 { label = "QSPI.kernel"; - reg = <0x00170000 0x0800000>; + reg = <0x001e0000 0x0800000>; }; partition@9 { label = "QSPI.file-system"; - reg = <0x00970000 0x01690000>; + reg = <0x009e0000 0x01620000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 0a229fcd7acf..d75c89d7666a 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -736,7 +736,7 @@ dp_phy: video-phy@10040720 { compatible = "samsung,exynos5250-dp-video-phy"; - reg = <0x10040720 4>; + samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index aa7a7d727a7e..db2c1c4cd900 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -372,3 +372,7 @@ &usbdrd_dwc3_1 { dr_mode = "host"; }; + +&cci { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 517e50f6760b..6d38f8bfd0e6 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -120,7 +120,7 @@ }; }; - cci@10d20000 { + cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; #size-cells = <1>; @@ -503,8 +503,8 @@ }; dp_phy: video-phy@10040728 { - compatible = "samsung,exynos5250-dp-video-phy"; - reg = <0x10040728 4>; + compatible = "samsung,exynos5420-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; #phy-cells = <0>; }; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 58d3c3cf2923..d238676a9107 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -162,7 +162,7 @@ #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; reg = <0x43fa4000 0x4000>; - clocks = <&clks 62>, <&clks 62>; + clocks = <&clks 78>, <&clks 78>; clock-names = "ipg", "per"; interrupts = <14>; status = "disabled"; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 56569cecaa78..649befeb2cf9 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -127,24 +127,12 @@ #address-cells = <1>; #size-cells = <0>; - reg_usbh1_vbus: regulator@0 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1reg>; - reg = <0>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@1 { + reg_hub_reset: regulator@0 { compatible = "regulator-fixed"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotgreg>; - reg = <1>; - regulator-name = "usbotg_vbus"; + reg = <0>; + regulator-name = "hub_reset"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; @@ -176,6 +164,7 @@ reg = <0>; clocks = <&clks IMX5_CLK_DUMMY>; clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; }; }; @@ -419,7 +408,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - vbus-supply = <®_usbh1_vbus>; + vbus-supply = <®_hub_reset>; fsl,usbphy = <&usbh1phy>; phy_type = "ulpi"; status = "okay"; @@ -429,7 +418,6 @@ dr_mode = "otg"; disable-over-current; phy_type = "utmi_wide"; - vbus-supply = <®_usbotg_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4fc03b7f1cee..2109d0763c1b 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -335,8 +335,8 @@ vpu: vpu@02040000 { compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; - interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, - <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bit", "jpeg"; clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 657da14cb4b5..c70bb27ac65a 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -142,6 +142,7 @@ scfg: scfg@1570000 { compatible = "fsl,ls1021a-scfg", "syscon"; reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; }; clockgen: clocking@1ee1000 { diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 53f3ca064140..b550c41b46f1 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -700,11 +700,9 @@ }; }; + /* Ethernet is on some early development boards and qemu */ ethernet@gpmc { compatible = "smsc,lan91c94"; - - status = "disabled"; - interrupt-parent = <&gpio2>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */ reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */ diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 3e067dd65d0c..6194d673e80b 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -155,6 +155,15 @@ }; &pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + backlight { bl_en: bl-en { rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; @@ -173,6 +182,27 @@ }; }; + sdmmc { + /* + * Default drive strength isn't enough to achieve even + * high-speed mode on EVB board so bump up to 8ma. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 49c10d33df30..77e03655aca3 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -176,7 +176,7 @@ "Headphone Jack", "HPOUTR", "IN2L", "Line In Jack", "IN2R", "Line In Jack", - "MICBIAS", "IN1L", + "Mic", "MICBIAS", "IN1L", "Mic"; atmel,ssc-controller = <&ssc0>; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 1b0f30c2c4a5..b94995d1889f 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1008,7 +1008,7 @@ pit: timer@fc068630 { compatible = "atmel,at91sam9260-pit"; - reg = <0xfc068630 0xf>; + reg = <0xfc068630 0x10>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&h32ck>; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index a8c00ee7522a..3d0b8755caee 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -25,11 +25,11 @@ stmpe2401_1 { stmpe2401_1_nhk_mode: stmpe2401_1_nhk { nhk_cfg1 { - ste,pins = "GPIO76_B20"; // IRQ line + pins = "GPIO76_B20"; // IRQ line ste,input = <0>; }; nhk_cfg2 { - ste,pins = "GPIO77_B8"; // reset line + pins = "GPIO77_B8"; // reset line ste,output = <1>; }; }; @@ -37,11 +37,11 @@ stmpe2401_2 { stmpe2401_2_nhk_mode: stmpe2401_2_nhk { nhk_cfg1 { - ste,pins = "GPIO78_A8"; // IRQ line + pins = "GPIO78_A8"; // IRQ line ste,input = <0>; }; nhk_cfg2 { - ste,pins = "GPIO79_C9"; // reset line + pins = "GPIO79_C9"; // reset line ste,output = <1>; }; }; diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 5ef14de00a29..3d0c5d65c741 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -84,7 +84,8 @@ CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_CHARGER_TPS65090=y -# CONFIG_HWMON is not set +CONFIG_HWMON=y +CONFIG_SENSORS_LM90=y CONFIG_THERMAL=y CONFIG_EXYNOS_THERMAL=y CONFIG_EXYNOS_THERMAL_CORE=y @@ -109,11 +110,26 @@ CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y +CONFIG_DRM=y +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PTN3460=y +CONFIG_DRM_PS8622=y +CONFIG_DRM_EXYNOS=y +CONFIG_DRM_EXYNOS_FIMD=y +CONFIG_DRM_EXYNOS_DP=y +CONFIG_DRM_PANEL=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_7x14=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c2c3a852af9f..667d9d52aa01 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -68,7 +68,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y -CONFIG_GENERIC_CPUFREQ_CPU0=y +CONFIG_CPUFREQ_DT=y # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y diff --git a/arch/arm/mach-at91/board-dt-sama5.c b/arch/arm/mach-at91/board-dt-sama5.c index 8fb9ef5333f1..97f7367d32b8 100644 --- a/arch/arm/mach-at91/board-dt-sama5.c +++ b/arch/arm/mach-at91/board-dt-sama5.c @@ -17,6 +17,7 @@ #include <linux/of_platform.h> #include <linux/phy.h> #include <linux/clk-provider.h> +#include <linux/phy.h> #include <asm/setup.h> #include <asm/irq.h> @@ -26,8 +27,25 @@ #include "generic.h" +static int ksz8081_phy_fixup(struct phy_device *phy) +{ + int value; + + value = phy_read(phy, 0x16); + value &= ~0x20; + phy_write(phy, 0x16, value); + + return 0; +} + static void __init sama5_dt_device_init(void) { + if (of_machine_is_compatible("atmel,sama5d4ek") && + IS_ENABLED(CONFIG_PHYLIB)) { + phy_register_fixup_for_id("fc028000.etherne:00", + ksz8081_phy_fixup); + } + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 5951660d1bd2..2daef619d053 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -144,7 +144,7 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) post_div_table[1].div = 1; post_div_table[2].div = 1; video_div_table[1].div = 1; - video_div_table[2].div = 1; + video_div_table[3].div = 1; } clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c index 17354a11356f..5a3e5a159e70 100644 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -558,6 +558,9 @@ static void __init imx6sx_clocks_init(struct device_node *ccm_node) clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]); + /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 608079a1aba6..b61c049f92d6 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -77,6 +77,24 @@ MACHINE_END #endif #ifdef CONFIG_ARCH_OMAP3 +/* Some boards need board name for legacy userspace in /proc/cpuinfo */ +static const char *const n900_boards_compat[] __initconst = { + "nokia,omap3-n900", + NULL, +}; + +DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3430_init_early, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_sync32k_timer_init, + .dt_compat = n900_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + +/* Generic omap3 boards, most boards can use these */ static const char *const omap3_boards_compat[] __initconst = { "ti,omap3430", "ti,omap3", diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 377eea849e7b..db57741c9c8a 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -249,6 +249,7 @@ extern void omap4_cpu_die(unsigned int cpu); extern struct smp_operations omap4_smp_ops; extern void omap5_secondary_startup(void); +extern void omap5_secondary_hyp_startup(void); #endif #if defined(CONFIG_SMP) && defined(CONFIG_PM) diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a3c013345c45..a80ac2d70bb1 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -286,6 +286,10 @@ #define OMAP5XXX_CONTROL_STATUS 0x134 #define OMAP5_DEVICETYPE_MASK (0x7 << 6) +/* DRA7XX CONTROL CORE BOOTSTRAP */ +#define DRA7_CTRL_CORE_BOOTSTRAP 0x6c4 +#define DRA7_SPEEDSELECT_MASK (0x3 << 8) + /* * REVISIT: This list of registers is not comprehensive - there are more * that should be added. diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4993d4bfe9b2..6d1dffca6c7b 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -22,6 +22,7 @@ /* Physical address needed since MMU not enabled yet on secondary core */ #define AUX_CORE_BOOT0_PA 0x48281800 +#define API_HYP_ENTRY 0x102 /* * OMAP5 specific entry point for secondary CPU to jump from ROM @@ -41,6 +42,26 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 b secondary_startup ENDPROC(omap5_secondary_startup) /* + * Same as omap5_secondary_startup except we call into the ROM to + * enable HYP mode first. This is called instead of + * omap5_secondary_startup if the primary CPU was put into HYP mode by + * the boot loader. + */ +ENTRY(omap5_secondary_hyp_startup) +wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 + ldr r0, [r2] + mov r0, r0, lsr #5 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 + bne wait_2 + ldr r12, =API_HYP_ENTRY + adr r0, hyp_boot + smc #0 +hyp_boot: + b secondary_startup +ENDPROC(omap5_secondary_hyp_startup) +/* * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 256e84ef0f67..5305ec7341ec 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -22,6 +22,7 @@ #include <linux/irqchip/arm-gic.h> #include <asm/smp_scu.h> +#include <asm/virt.h> #include "omap-secure.h" #include "omap-wakeupgen.h" @@ -227,8 +228,16 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else - writel_relaxed(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); + /* + * If the boot CPU is in HYP mode then start secondary + * CPU in HYP mode as well. + */ + if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) + writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup), + base + OMAP_AUX_CORE_BOOT_1); + else + writel_relaxed(virt_to_phys(omap5_secondary_startup), + base + OMAP_AUX_CORE_BOOT_1); } diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 4f61148ec168..7d45c84c69ba 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -54,6 +54,7 @@ #include "soc.h" #include "common.h" +#include "control.h" #include "powerdomain.h" #include "omap-secure.h" @@ -496,7 +497,8 @@ static void __init realtime_counter_init(void) void __iomem *base; static struct clk *sys_clk; unsigned long rate; - unsigned int reg, num, den; + unsigned int reg; + unsigned long long num, den; base = ioremap(REALTIME_COUNTER_BASE, SZ_32); if (!base) { @@ -511,13 +513,42 @@ static void __init realtime_counter_init(void) } rate = clk_get_rate(sys_clk); + + if (soc_is_dra7xx()) { + /* + * Errata i856 says the 32.768KHz crystal does not start at + * power on, so the CPU falls back to an emulated 32KHz clock + * based on sysclk / 610 instead. This causes the master counter + * frequency to not be 6.144MHz but at sysclk / 610 * 375 / 2 + * (OR sysclk * 75 / 244) + * + * This affects at least the DRA7/AM572x 1.0, 1.1 revisions. + * Of course any board built without a populated 32.768KHz + * crystal would also need this fix even if the CPU is fixed + * later. + * + * Either case can be detected by using the two speedselect bits + * If they are not 0, then the 32.768KHz clock driving the + * coarse counter that corrects the fine counter every time it + * ticks is actually rate/610 rather than 32.768KHz and we + * should compensate to avoid the 570ppm (at 20MHz, much worse + * at other rates) too fast system time. + */ + reg = omap_ctrl_readl(DRA7_CTRL_CORE_BOOTSTRAP); + if (reg & DRA7_SPEEDSELECT_MASK) { + num = 75; + den = 244; + goto sysclk1_based; + } + } + /* Numerator/denumerator values refer TRM Realtime Counter section */ switch (rate) { - case 1200000: + case 12000000: num = 64; den = 125; break; - case 1300000: + case 13000000: num = 768; den = 1625; break; @@ -529,11 +560,11 @@ static void __init realtime_counter_init(void) num = 192; den = 625; break; - case 2600000: + case 26000000: num = 384; den = 1625; break; - case 2700000: + case 27000000: num = 256; den = 1125; break; @@ -545,6 +576,7 @@ static void __init realtime_counter_init(void) break; } +sysclk1_based: /* Program numerator and denumerator registers */ reg = readl_relaxed(base + INCREMENTER_NUMERATOR_OFFSET) & NUMERATOR_DENUMERATOR_MASK; @@ -556,7 +588,7 @@ static void __init realtime_counter_init(void) reg |= den; writel_relaxed(reg, base + INCREMENTER_DENUMERATOR_RELOAD_OFFSET); - arch_timer_freq = (rate / den) * num; + arch_timer_freq = DIV_ROUND_UP_ULL(rate * num, den); set_cntfreq(); iounmap(base); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d226b71d21d5..a611f4852582 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -19,11 +19,37 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <linux/irqchip.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/hardware/cache-l2x0.h> #include "core.h" +#define RK3288_GRF_SOC_CON0 0x244 + +static void __init rockchip_timer_init(void) +{ + if (of_machine_is_compatible("rockchip,rk3288")) { + struct regmap *grf; + + /* + * Disable auto jtag/sdmmc switching that causes issues + * with the mmc controllers making them unreliable + */ + grf = syscon_regmap_lookup_by_compatible("rockchip,rk3288-grf"); + if (!IS_ERR(grf)) + regmap_write(grf, RK3288_GRF_SOC_CON0, 0x10000000); + else + pr_err("rockchip: could not get grf syscon\n"); + } + + of_clk_init(NULL); + clocksource_of_init(); +} + static void __init rockchip_dt_init(void) { of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); @@ -42,6 +68,7 @@ static const char * const rockchip_board_dt_compat[] = { DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") .l2c_aux_val = 0, .l2c_aux_mask = ~0, + .init_time = rockchip_timer_init, .dt_compat = rockchip_board_dt_compat, .init_machine = rockchip_dt_init, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 79ad93dfdae4..d191cf419731 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -800,7 +800,14 @@ void __init r8a7740_init_irq_of(void) void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10); void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4); +#ifdef CONFIG_ARCH_SHMOBILE_LEGACY + void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000); + void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000); + + gic_init(0, 29, gic_dist_base, gic_cpu_base); +#else irqchip_init(); +#endif /* route signals to GIC */ iowrite32(0x0, pfc_inta_ctrl); diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 93ebe3430bfe..fb5e1bb34be8 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -595,6 +595,7 @@ static struct platform_device ipmmu_device = { static struct renesas_intc_irqpin_config irqpin0_platform_data = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ7 */ + .control_parent = true, }; static struct resource irqpin0_resources[] = { @@ -656,6 +657,7 @@ static struct platform_device irqpin1_device = { static struct renesas_intc_irqpin_config irqpin2_platform_data = { .irq_base = irq_pin(16), /* IRQ16 -> IRQ23 */ + .control_parent = true, }; static struct resource irqpin2_resources[] = { @@ -686,6 +688,7 @@ static struct platform_device irqpin2_device = { static struct renesas_intc_irqpin_config irqpin3_platform_data = { .irq_base = irq_pin(24), /* IRQ24 -> IRQ31 */ + .control_parent = true, }; static struct resource irqpin3_resources[] = { diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h index b780c6c76eec..23e9432ac112 100644 --- a/arch/arm64/include/asm/unistd.h +++ b/arch/arm64/include/asm/unistd.h @@ -44,7 +44,7 @@ #define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2) #define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5) -#define __NR_compat_syscalls 387 +#define __NR_compat_syscalls 388 #endif #define __ARCH_WANT_SYS_CLONE diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 8893cebcea5b..27224426e0bf 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -795,3 +795,5 @@ __SYSCALL(__NR_getrandom, sys_getrandom) __SYSCALL(__NR_memfd_create, sys_memfd_create) #define __NR_bpf 386 __SYSCALL(__NR_bpf, sys_bpf) +#define __NR_execveat 387 +__SYSCALL(__NR_execveat, compat_sys_execveat) diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c index bac492c12fcc..c95464a33f36 100644 --- a/arch/arm64/mm/init.c +++ b/arch/arm64/mm/init.c @@ -335,14 +335,8 @@ static int keep_initrd; void free_initrd_mem(unsigned long start, unsigned long end) { - if (!keep_initrd) { - if (start == initrd_start) - start = round_down(start, PAGE_SIZE); - if (end == initrd_end) - end = round_up(end, PAGE_SIZE); - + if (!keep_initrd) free_reserved_area((void *)start, (void *)end, 0, "initrd"); - } } static int __init keepinitrd_setup(char *__unused) diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c index 2c9412908024..164efa009e5b 100644 --- a/arch/avr32/kernel/module.c +++ b/arch/avr32/kernel/module.c @@ -19,12 +19,10 @@ #include <linux/moduleloader.h> #include <linux/vmalloc.h> -void module_free(struct module *mod, void *module_region) +void module_arch_freeing_init(struct module *mod) { vfree(mod->arch.syminfo); mod->arch.syminfo = NULL; - - vfree(module_region); } static inline int check_rela(Elf32_Rela *rela, struct module *module, @@ -291,12 +289,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, return ret; } - -int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, - struct module *module) -{ - vfree(module->arch.syminfo); - module->arch.syminfo = NULL; - - return 0; -} diff --git a/arch/cris/kernel/module.c b/arch/cris/kernel/module.c index 51123f985eb5..af04cb6b6dc9 100644 --- a/arch/cris/kernel/module.c +++ b/arch/cris/kernel/module.c @@ -36,7 +36,7 @@ void *module_alloc(unsigned long size) } /* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) +void module_memfree(void *module_region) { kfree(module_region); } diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c index 24603be24c14..29754aae5177 100644 --- a/arch/ia64/kernel/module.c +++ b/arch/ia64/kernel/module.c @@ -305,14 +305,12 @@ plt_target (struct plt_entry *plt) #endif /* !USE_BRL */ void -module_free (struct module *mod, void *module_region) +module_arch_freeing_init (struct module *mod) { - if (mod && mod->arch.init_unw_table && - module_region == mod->module_init) { + if (mod->arch.init_unw_table) { unw_remove_unwind_table(mod->arch.init_unw_table); mod->arch.init_unw_table = NULL; } - vfree(module_region); } /* Have we already seen one of these relocations? */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 75e75d7b1702..244e0dbe45db 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include <uapi/asm/unistd.h> -#define NR_syscalls 355 +#define NR_syscalls 356 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index 2c1bec9a14b6..61fb6cb9d2ae 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -360,5 +360,6 @@ #define __NR_getrandom 352 #define __NR_memfd_create 353 #define __NR_bpf 354 +#define __NR_execveat 355 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 2ca219e184cd..a0ec4303f2c8 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -375,4 +375,5 @@ ENTRY(sys_call_table) .long sys_getrandom .long sys_memfd_create .long sys_bpf + .long sys_execveat /* 355 */ diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c index 9fd6834a2172..5d6139390bf8 100644 --- a/arch/mips/net/bpf_jit.c +++ b/arch/mips/net/bpf_jit.c @@ -1388,7 +1388,7 @@ out: void bpf_jit_free(struct bpf_prog *fp) { if (fp->jited) - module_free(NULL, fp->bpf_func); + module_memfree(fp->bpf_func); bpf_prog_unlock_free(fp); } diff --git a/arch/nios2/kernel/module.c b/arch/nios2/kernel/module.c index cc924a38f22a..e2e3f13f98d5 100644 --- a/arch/nios2/kernel/module.c +++ b/arch/nios2/kernel/module.c @@ -36,7 +36,7 @@ void *module_alloc(unsigned long size) } /* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) +void module_memfree(void *module_region) { kfree(module_region); } diff --git a/arch/nios2/kernel/signal.c b/arch/nios2/kernel/signal.c index f9d27883a714..2d0ea25be171 100644 --- a/arch/nios2/kernel/signal.c +++ b/arch/nios2/kernel/signal.c @@ -200,7 +200,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, /* Set up to return from userspace; jump to fixed address sigreturn trampoline on kuser page. */ - regs->ra = (unsigned long) (0x1040); + regs->ra = (unsigned long) (0x1044); /* Set up registers for signal handler */ regs->sp = (unsigned long) frame; diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c index 50dfafc3f2c1..5822e8e200e6 100644 --- a/arch/parisc/kernel/module.c +++ b/arch/parisc/kernel/module.c @@ -298,14 +298,10 @@ static inline unsigned long count_stubs(const Elf_Rela *rela, unsigned long n) } #endif - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) +void module_arch_freeing_init(struct module *mod) { kfree(mod->arch.section); mod->arch.section = NULL; - - vfree(module_region); } /* Additional bytes needed in front of individual sections */ diff --git a/arch/powerpc/crypto/sha1.c b/arch/powerpc/crypto/sha1.c index d3feba5a275f..c154cebc1041 100644 --- a/arch/powerpc/crypto/sha1.c +++ b/arch/powerpc/crypto/sha1.c @@ -154,4 +154,5 @@ module_exit(sha1_powerpc_mod_fini); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm"); +MODULE_ALIAS_CRYPTO("sha1"); MODULE_ALIAS_CRYPTO("sha1-powerpc"); diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index ebc4f165690a..0be6c681cab1 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -23,9 +23,9 @@ #define THREAD_SIZE (1 << THREAD_SHIFT) #ifdef CONFIG_PPC64 -#define CURRENT_THREAD_INFO(dest, sp) clrrdi dest, sp, THREAD_SHIFT +#define CURRENT_THREAD_INFO(dest, sp) stringify_in_c(clrrdi dest, sp, THREAD_SHIFT) #else -#define CURRENT_THREAD_INFO(dest, sp) rlwinm dest, sp, 0, 0, 31-THREAD_SHIFT +#define CURRENT_THREAD_INFO(dest, sp) stringify_in_c(rlwinm dest, sp, 0, 0, 31-THREAD_SHIFT) #endif #ifndef __ASSEMBLY__ @@ -71,12 +71,13 @@ struct thread_info { #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT) /* how to get the thread information struct from C */ -register unsigned long __current_r1 asm("r1"); static inline struct thread_info *current_thread_info(void) { - /* gcc4, at least, is smart enough to turn this into a single - * rlwinm for ppc32 and clrrdi for ppc64 */ - return (struct thread_info *)(__current_r1 & ~(THREAD_SIZE-1)); + unsigned long val; + + asm (CURRENT_THREAD_INFO(%0,1) : "=r" (val)); + + return (struct thread_info *)val; } #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 1ca125b9c226..d1916b577f2c 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -699,7 +699,7 @@ out: void bpf_jit_free(struct bpf_prog *fp) { if (fp->jited) - module_free(NULL, fp->bpf_func); + module_memfree(fp->bpf_func); bpf_prog_unlock_free(fp); } diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 54eca8b3b288..0509bca5e830 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -40,7 +40,6 @@ BEGIN_FTR_SECTION; \ b 1f; \ END_FTR_SECTION(0, 1); \ ld r12,opal_tracepoint_refcount@toc(r2); \ - std r12,32(r1); \ cmpdi r12,0; \ bne- LABEL; \ 1: diff --git a/arch/s390/kernel/module.c b/arch/s390/kernel/module.c index b89b59158b95..409d152585be 100644 --- a/arch/s390/kernel/module.c +++ b/arch/s390/kernel/module.c @@ -55,14 +55,10 @@ void *module_alloc(unsigned long size) } #endif -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) +void module_arch_freeing_init(struct module *mod) { - if (mod) { - vfree(mod->arch.syminfo); - mod->arch.syminfo = NULL; - } - vfree(module_region); + vfree(mod->arch.syminfo); + mod->arch.syminfo = NULL; } static void check_rela(Elf_Rela *rela, struct module *me) diff --git a/arch/sparc/net/bpf_jit_comp.c b/arch/sparc/net/bpf_jit_comp.c index f33e7c7a3bf7..7931eeeb649a 100644 --- a/arch/sparc/net/bpf_jit_comp.c +++ b/arch/sparc/net/bpf_jit_comp.c @@ -776,7 +776,7 @@ cond_branch: f_offset = addrs[i + filter[i].jf]; if (unlikely(proglen + ilen > oldproglen)) { pr_err("bpb_jit_compile fatal error\n"); kfree(addrs); - module_free(NULL, image); + module_memfree(image); return; } memcpy(image + proglen, temp, ilen); @@ -822,7 +822,7 @@ out: void bpf_jit_free(struct bpf_prog *fp) { if (fp->jited) - module_free(NULL, fp->bpf_func); + module_memfree(fp->bpf_func); bpf_prog_unlock_free(fp); } diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c index 96447c9160a0..2305084c9b93 100644 --- a/arch/tile/kernel/module.c +++ b/arch/tile/kernel/module.c @@ -74,7 +74,7 @@ error: /* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) +void module_memfree(void *module_region) { vfree(module_region); @@ -83,7 +83,7 @@ void module_free(struct module *mod, void *module_region) 0, 0, 0, NULL, NULL, 0); /* - * FIXME: If module_region == mod->module_init, trim exception + * FIXME: Add module_arch_freeing_init to trim exception * table entries. */ } diff --git a/arch/x86/crypto/sha-mb/sha1_mb.c b/arch/x86/crypto/sha-mb/sha1_mb.c index a225a5ca1037..fd9f6b035b16 100644 --- a/arch/x86/crypto/sha-mb/sha1_mb.c +++ b/arch/x86/crypto/sha-mb/sha1_mb.c @@ -931,4 +931,4 @@ module_exit(sha1_mb_mod_fini); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, multi buffer accelerated"); -MODULE_ALIAS("sha1"); +MODULE_ALIAS_CRYPTO("sha1"); diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index 3c895d480cd7..073983398364 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -568,8 +568,8 @@ struct event_constraint intel_atom_pebs_event_constraints[] = { }; struct event_constraint intel_slm_pebs_event_constraints[] = { - /* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */ - INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf), + /* INST_RETIRED.ANY_P, inv=1, cmask=16 (cycles:p). */ + INTEL_FLAGS_EVENT_CONSTRAINT(0x108000c0, 0x1), /* Allow all events as PEBS with no flags */ INTEL_ALL_EVENT_CONSTRAINT(0, 0x1), EVENT_CONSTRAINT_END diff --git a/arch/x86/kernel/cpu/perf_event_intel_rapl.c b/arch/x86/kernel/cpu/perf_event_intel_rapl.c index 673f930c700f..6e434f8e5fc8 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_rapl.c +++ b/arch/x86/kernel/cpu/perf_event_intel_rapl.c @@ -103,6 +103,13 @@ static struct kobj_attribute format_attr_##_var = \ #define RAPL_CNTR_WIDTH 32 /* 32-bit rapl counters */ +#define RAPL_EVENT_ATTR_STR(_name, v, str) \ +static struct perf_pmu_events_attr event_attr_##v = { \ + .attr = __ATTR(_name, 0444, rapl_sysfs_show, NULL), \ + .id = 0, \ + .event_str = str, \ +}; + struct rapl_pmu { spinlock_t lock; int hw_unit; /* 1/2^hw_unit Joule */ @@ -379,23 +386,36 @@ static struct attribute_group rapl_pmu_attr_group = { .attrs = rapl_pmu_attrs, }; -EVENT_ATTR_STR(energy-cores, rapl_cores, "event=0x01"); -EVENT_ATTR_STR(energy-pkg , rapl_pkg, "event=0x02"); -EVENT_ATTR_STR(energy-ram , rapl_ram, "event=0x03"); -EVENT_ATTR_STR(energy-gpu , rapl_gpu, "event=0x04"); +static ssize_t rapl_sysfs_show(struct device *dev, + struct device_attribute *attr, + char *page) +{ + struct perf_pmu_events_attr *pmu_attr = \ + container_of(attr, struct perf_pmu_events_attr, attr); + + if (pmu_attr->event_str) + return sprintf(page, "%s", pmu_attr->event_str); + + return 0; +} + +RAPL_EVENT_ATTR_STR(energy-cores, rapl_cores, "event=0x01"); +RAPL_EVENT_ATTR_STR(energy-pkg , rapl_pkg, "event=0x02"); +RAPL_EVENT_ATTR_STR(energy-ram , rapl_ram, "event=0x03"); +RAPL_EVENT_ATTR_STR(energy-gpu , rapl_gpu, "event=0x04"); -EVENT_ATTR_STR(energy-cores.unit, rapl_cores_unit, "Joules"); -EVENT_ATTR_STR(energy-pkg.unit , rapl_pkg_unit, "Joules"); -EVENT_ATTR_STR(energy-ram.unit , rapl_ram_unit, "Joules"); -EVENT_ATTR_STR(energy-gpu.unit , rapl_gpu_unit, "Joules"); +RAPL_EVENT_ATTR_STR(energy-cores.unit, rapl_cores_unit, "Joules"); +RAPL_EVENT_ATTR_STR(energy-pkg.unit , rapl_pkg_unit, "Joules"); +RAPL_EVENT_ATTR_STR(energy-ram.unit , rapl_ram_unit, "Joules"); +RAPL_EVENT_ATTR_STR(energy-gpu.unit , rapl_gpu_unit, "Joules"); /* * we compute in 0.23 nJ increments regardless of MSR */ -EVENT_ATTR_STR(energy-cores.scale, rapl_cores_scale, "2.3283064365386962890625e-10"); -EVENT_ATTR_STR(energy-pkg.scale, rapl_pkg_scale, "2.3283064365386962890625e-10"); -EVENT_ATTR_STR(energy-ram.scale, rapl_ram_scale, "2.3283064365386962890625e-10"); -EVENT_ATTR_STR(energy-gpu.scale, rapl_gpu_scale, "2.3283064365386962890625e-10"); +RAPL_EVENT_ATTR_STR(energy-cores.scale, rapl_cores_scale, "2.3283064365386962890625e-10"); +RAPL_EVENT_ATTR_STR(energy-pkg.scale, rapl_pkg_scale, "2.3283064365386962890625e-10"); +RAPL_EVENT_ATTR_STR(energy-ram.scale, rapl_ram_scale, "2.3283064365386962890625e-10"); +RAPL_EVENT_ATTR_STR(energy-gpu.scale, rapl_gpu_scale, "2.3283064365386962890625e-10"); static struct attribute *rapl_events_srv_attr[] = { EVENT_PTR(rapl_cores), diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 2142376dc8c6..8b7b0a51e742 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -674,7 +674,7 @@ static inline void *alloc_tramp(unsigned long size) } static inline void tramp_free(void *tramp) { - module_free(NULL, tramp); + module_memfree(tramp); } #else /* Trampolines can only be created if modules are supported */ diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index f7e3cd50ece0..98f654d466e5 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -1020,6 +1020,15 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) regs->flags &= ~X86_EFLAGS_IF; trace_hardirqs_off(); regs->ip = (unsigned long)(jp->entry); + + /* + * jprobes use jprobe_return() which skips the normal return + * path of the function, and this messes up the accounting of the + * function graph tracer to get messed up. + * + * Pause function graph tracing while performing the jprobe function. + */ + pause_graph_tracing(); return 1; } NOKPROBE_SYMBOL(setjmp_pre_handler); @@ -1048,24 +1057,25 @@ int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); u8 *addr = (u8 *) (regs->ip - 1); struct jprobe *jp = container_of(p, struct jprobe, kp); + void *saved_sp = kcb->jprobe_saved_sp; if ((addr > (u8 *) jprobe_return) && (addr < (u8 *) jprobe_return_end)) { - if (stack_addr(regs) != kcb->jprobe_saved_sp) { + if (stack_addr(regs) != saved_sp) { struct pt_regs *saved_regs = &kcb->jprobe_saved_regs; printk(KERN_ERR "current sp %p does not match saved sp %p\n", - stack_addr(regs), kcb->jprobe_saved_sp); + stack_addr(regs), saved_sp); printk(KERN_ERR "Saved registers for jprobe %p\n", jp); show_regs(saved_regs); printk(KERN_ERR "Current registers\n"); show_regs(regs); BUG(); } + /* It's OK to start function graph tracing again */ + unpause_graph_tracing(); *regs = kcb->jprobe_saved_regs; - memcpy((kprobe_opcode_t *)(kcb->jprobe_saved_sp), - kcb->jprobes_stack, - MIN_STACK_SIZE(kcb->jprobe_saved_sp)); + memcpy(saved_sp, kcb->jprobes_stack, MIN_STACK_SIZE(saved_sp)); preempt_enable_no_resched(); return 1; } |