diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mm/cache-v7m.S | 453 | ||||
| -rw-r--r-- | arch/arm/mm/proc-macros.S | 16 |
2 files changed, 469 insertions, 0 deletions
diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S new file mode 100644 index 000000000000..816a7e44e6f1 --- /dev/null +++ b/arch/arm/mm/cache-v7m.S @@ -0,0 +1,453 @@ +/* + * linux/arch/arm/mm/cache-v7m.S + * + * Based on linux/arch/arm/mm/cache-v7.S + * + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * Copyright (C) 2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is the "shell" of the ARMv7M processor support. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/unwind.h> +#include <asm/v7m.h> + +#include "proc-macros.S" + +/* Generic V7M read/write macros for memory mapped cache operations */ +.macro v7m_cache_read, rt, reg + movw \rt, #:lower16:BASEADDR_V7M_SCB + \reg + movt \rt, #:upper16:BASEADDR_V7M_SCB + \reg + ldr \rt, [\rt] +.endm + +.macro v7m_cacheop, rt, tmp, op, c = al + movw\c \tmp, #:lower16:BASEADDR_V7M_SCB + \op + movt\c \tmp, #:upper16:BASEADDR_V7M_SCB + \op + str\c \rt, [\tmp] +.endm + + +.macro read_ccsidr, rt + v7m_cache_read \rt, V7M_SCB_CCSIDR +.endm + +.macro read_clidr, rt + v7m_cache_read \rt, V7M_SCB_CLIDR +.endm + +.macro write_csselr, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_CSSELR +.endm + +/* + * dcisw: Invalidate data cache by set/way + */ +.macro dcisw, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCISW +.endm + +/* + * dccisw: Clean and invalidate data cache by set/way + */ +.macro dccisw, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCISW +.endm + +/* + * dccimvac: Clean and invalidate data cache line by MVA to PoC. + */ +.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo +.macro dccimvac\c, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCIMVAC, \c +.endm +.endr + +/* + * dcimvac: Invalidate data cache line by MVA to PoC + */ +.macro dcimvac, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC +.endm + +/* + * dccmvau: Clean data cache line by MVA to PoU + */ +.macro dccmvau, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAU +.endm + +/* + * dccmvac: Clean data cache line by MVA to PoC + */ +.macro dccmvac, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAC +.endm + +/* + * icimvau: Invalidate instruction caches by MVA to PoU + */ +.macro icimvau, rt, tmp + v7m_cacheop \rt, \tmp, V7M_SCB_ICIMVAU +.endm + +/* + * Invalidate the icache, inner shareable if SMP, invalidate BTB for UP. + * rt data ignored by ICIALLU(IS), so can be used for the address + */ +.macro invalidate_icache, rt + v7m_cacheop \rt, \rt, V7M_SCB_ICIALLU + mov \rt, #0 +.endm + +/* + * Invalidate the BTB, inner shareable if SMP. + * rt data ignored by BPIALL, so it can be used for the address + */ +.macro invalidate_bp, rt + v7m_cacheop \rt, \rt, V7M_SCB_BPIALL + mov \rt, #0 +.endm + +ENTRY(v7m_invalidate_l1) + mov r0, #0 + + write_csselr r0, r1 + read_ccsidr r0 + + movw r1, #0x7fff + and r2, r1, r0, lsr #13 + + movw r1, #0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + dcisw r5, r6 + bgt 2b + cmp r2, #0 + bgt 1b + dsb st + isb + ret lr +ENDPROC(v7m_invalidate_l1) + +/* + * v7m_flush_icache_all() + * + * Flush the whole I-cache. + * + * Registers: + * r0 - set to 0 + */ +ENTRY(v7m_flush_icache_all) + invalidate_icache r0 + ret lr +ENDPROC(v7m_flush_icache_all) + +/* + * v7m_flush_dcache_all() + * + * Flush the whole D-cache. + * + * Corrupted registers: r0-r7, r9-r11 + */ +ENTRY(v7m_flush_dcache_all) + dmb @ ensure ordering with previous memory accesses + read_clidr r0 + mov r3, r0, lsr #23 @ move LoC into position + ands r3, r3, #7 << 1 @ extract LoC*2 from clidr + beq finished @ if loc is 0, then no need to clean +start_flush_levels: + mov r10, #0 @ start clean at cache level 0 +flush_levels: + add r2, r10, r10, lsr #1 @ work out 3x current cache level + mov r1, r0, lsr r2 @ extract cache type bits from clidr + and r1, r1, #7 @ mask of the bits for current cache only + cmp r1, #2 @ see what cache we have at this level + blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif + write_csselr r10, r1 @ set current cache level + isb @ isb to sych the new cssr&csidr + read_ccsidr r1 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif + and r2, r1, #7 @ extract the length of the cache lines + add r2, r2, #4 @ add 4 (line length offset) + movw r4, #0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the way size + clz r5, r4 @ find bit position of way size increment + movw r7, #0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop1: + mov r9, r7 @ create working copy of max index +loop2: + lsl r6, r4, r5 + orr r11, r10, r6 @ factor way and cache number into r11 + lsl r6, r9, r2 + orr r11, r11, r6 @ factor index number into r11 + dccisw r11, r6 @ clean/invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way + bge loop1 +skip: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt flush_levels +finished: + mov r10, #0 @ swith back to cache level 0 + write_csselr r10, r3 @ select current cache level in cssr + dsb st + isb + ret lr +ENDPROC(v7m_flush_dcache_all) + +/* + * v7m_flush_cache_all() + * + * Flush the entire cache system. + * The data cache flush is now achieved using atomic clean / invalidates + * working outwards from L1 cache. This is done using Set/Way based cache + * maintenance instructions. + * The instruction cache can still be invalidated back to the point of + * unification in a single instruction. + * + */ +ENTRY(v7m_flush_kern_cache_all) + stmfd sp!, {r4-r7, r9-r11, lr} + bl v7m_flush_dcache_all + invalidate_icache r0 + ldmfd sp!, {r4-r7, r9-r11, lr} + ret lr +ENDPROC(v7m_flush_kern_cache_all) + +/* + * v7m_flush_cache_all() + * + * Flush all TLB entries in a particular address space + * + * - mm - mm_struct describing address space + */ +ENTRY(v7m_flush_user_cache_all) + /*FALLTHROUGH*/ + +/* + * v7m_flush_cache_range(start, end, flags) + * + * Flush a range of TLB entries in the specified address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - flags - vm_area_struct flags describing address space + * + * It is assumed that: + * - we have a VIPT cache. + */ +ENTRY(v7m_flush_user_cache_range) + ret lr +ENDPROC(v7m_flush_user_cache_all) +ENDPROC(v7m_flush_user_cache_range) + +/* + * v7m_coherent_kern_range(start,end) + * + * Ensure that the I and D caches are coherent within specified + * region. This is typically used when code has been written to + * a memory region, and will be executed. + * + * - start - virtual start address of region + * - end - virtual end address of region + * + * It is assumed that: + * - the Icache does not read data from the write buffer + */ +ENTRY(v7m_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * v7m_coherent_user_range(start,end) + * + * Ensure that the I and D caches are coherent within specified + * region. This is typically used when code has been written to + * a memory region, and will be executed. + * + * - start - virtual start address of region + * - end - virtual end address of region + * + * It is assumed that: + * - the Icache does not read data from the write buffer + */ +ENTRY(v7m_coherent_user_range) + UNWIND(.fnstart ) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 +1: +/* + * We use open coded version of dccmvau otherwise USER() would + * point at movw instruction. + */ + dccmvau r12, r3 + add r12, r12, r2 + cmp r12, r1 + blo 1b + dsb ishst + icache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 +2: + icimvau r12, r3 + add r12, r12, r2 + cmp r12, r1 + blo 2b + invalidate_bp r0 + dsb ishst + isb + ret lr + UNWIND(.fnend ) +ENDPROC(v7m_coherent_kern_range) +ENDPROC(v7m_coherent_user_range) + +/* + * v7m_flush_kern_dcache_area(void *addr, size_t size) + * + * Ensure that the data held in the page kaddr is written back + * to the page in question. + * + * - addr - kernel address + * - size - region size + */ +ENTRY(v7m_flush_kern_dcache_area) + dcache_line_size r2, r3 + add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 +1: + dccimvac r0, r3 @ clean & invalidate D line / unified line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_flush_kern_dcache_area) + +/* + * v7m_dma_inv_range(start,end) + * + * Invalidate the data cache within the specified region; we will + * be performing a DMA operation in this region and we want to + * purge old data in the cache. + * + * - start - virtual start address of region + * - end - virtual end address of region + */ +v7m_dma_inv_range: + dcache_line_size r2, r3 + sub r3, r2, #1 + tst r0, r3 + bic r0, r0, r3 + dccimvacne r0, r3 + subne r3, r2, #1 @ restore r3, corrupted by v7m's dccimvac + tst r1, r3 + bic r1, r1, r3 + dccimvacne r1, r3 +1: + dcimvac r0, r3 + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_dma_inv_range) + +/* + * v7m_dma_clean_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +v7m_dma_clean_range: + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 +1: + dccmvac r0, r3 @ clean D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_dma_clean_range) + +/* + * v7m_dma_flush_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +ENTRY(v7m_dma_flush_range) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 +1: + dccimvac r0, r3 @ clean & invalidate D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7m_dma_flush_range) + +/* + * dma_map_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(v7m_dma_map_area) + add r1, r1, r0 + teq r2, #DMA_FROM_DEVICE + beq v7m_dma_inv_range + b v7m_dma_clean_range +ENDPROC(v7m_dma_map_area) + +/* + * dma_unmap_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(v7m_dma_unmap_area) + add r1, r1, r0 + teq r2, #DMA_TO_DEVICE + bne v7m_dma_inv_range + ret lr +ENDPROC(v7m_dma_unmap_area) + + .globl v7m_flush_kern_cache_louis + .equ v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all + + __INITDATA + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v7m diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index c671f345266a..0d40c285bd86 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -7,6 +7,10 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> +#ifdef CONFIG_CPU_V7M +#include <asm/v7m.h> +#endif + /* * vma_vm_mm - get mm pointer from vma pointer (vma->vm_mm) */ @@ -70,7 +74,13 @@ * on ARMv7. */ .macro dcache_line_size, reg, tmp +#ifdef CONFIG_CPU_V7M + movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR + movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR + ldr \tmp, [\tmp] +#else mrc p15, 0, \tmp, c0, c0, 1 @ read ctr +#endif lsr \tmp, \tmp, #16 and \tmp, \tmp, #0xf @ cache line size encoding mov \reg, #4 @ bytes per word @@ -82,7 +92,13 @@ * on ARMv7. */ .macro icache_line_size, reg, tmp +#ifdef CONFIG_CPU_V7M + movw \tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR + movt \tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR + ldr \tmp, [\tmp] +#else mrc p15, 0, \tmp, c0, c0, 1 @ read ctr +#endif and \tmp, \tmp, #0xf @ cache line size encoding mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size |