summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig1
-rw-r--r--arch/arm/boot/dts/Makefile2
-rw-r--r--arch/arm/boot/dts/at91sam9g45.dtsi5
-rw-r--r--arch/arm/boot/dts/at91sam9n12.dtsi9
-rw-r--r--arch/arm/boot/dts/at91sam9x5.dtsi15
-rw-r--r--arch/arm/boot/dts/integratorcp.dts6
-rw-r--r--arch/arm/boot/dts/sama5d3.dtsi19
-rw-r--r--arch/arm/boot/dts/sama5d34ek.dts2
-rw-r--r--arch/arm/boot/dts/spear1340.dtsi3
-rw-r--r--arch/arm/boot/dts/spear13xx.dtsi25
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts12
-rw-r--r--arch/arm/boot/dts/vexpress-v2p-ca9.dts1
-rw-r--r--arch/arm/common/timer-sp.c140
-rw-r--r--arch/arm/include/asm/arch_timer.h13
-rw-r--r--arch/arm/include/asm/hardware/timer-sp.h16
-rw-r--r--arch/arm/include/asm/sched_clock.h2
-rw-r--r--arch/arm/kernel/arch_timer.c29
-rw-r--r--arch/arm/kernel/sched_clock.c15
-rw-r--r--arch/arm/kernel/time.c7
-rw-r--r--arch/arm/mach-at91/cpuidle.c2
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h9
-rw-r--r--arch/arm/mach-at91/pm.c2
-rw-r--r--arch/arm/mach-at91/pm.h30
-rw-r--r--arch/arm/mach-at91/setup.c22
-rw-r--r--arch/arm/mach-highbank/highbank.c24
-rw-r--r--arch/arm/mach-integrator/integrator_cp.c34
-rw-r--r--arch/arm/mach-mvebu/Makefile2
-rw-r--r--arch/arm/mach-mvebu/armada-370-xp.c9
-rw-r--r--arch/arm/mach-mvebu/irq-armada-370-xp.c292
-rw-r--r--arch/arm/mach-omap2/board-2430sdp.c43
-rw-r--r--arch/arm/mach-omap2/board-3430sdp.c53
-rw-r--r--arch/arm/mach-omap2/board-4430sdp.c2
-rw-r--r--arch/arm/mach-omap2/board-am3517evm.c74
-rw-r--r--arch/arm/mach-omap2/board-cm-t35.c60
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c27
-rw-r--r--arch/arm/mach-omap2/board-ldp.c61
-rw-r--r--arch/arm/mach-omap2/board-omap3evm.c70
-rw-r--r--arch/arm/mach-omap2/board-omap3pandora.c7
-rw-r--r--arch/arm/mach-omap2/board-omap3stalker.c11
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c2
-rw-r--r--arch/arm/mach-omap2/board-overo.c58
-rw-r--r--arch/arm/mach-omap2/board-rx51-video.c26
-rw-r--r--arch/arm/mach-omap2/board-zoom-display.c38
-rw-r--r--arch/arm/mach-omap2/dss-common.c54
-rw-r--r--arch/arm/mach-omap2/timer.c7
-rw-r--r--arch/arm/mach-shmobile/board-kzm9d.c1
-rw-r--r--arch/arm/mach-shmobile/setup-emev2.c1
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7740.c1
-rw-r--r--arch/arm/mach-shmobile/setup-sh7372.c1
-rw-r--r--arch/arm/mach-shmobile/setup-sh73a0.c1
-rw-r--r--arch/arm/mach-shmobile/timer.c7
-rw-r--r--arch/arm/mach-spear/Makefile6
-rw-r--r--arch/arm/mach-spear/generic.h5
-rw-r--r--arch/arm/mach-spear/include/mach/spear.h2
-rw-r--r--arch/arm/mach-spear/spear1310.c30
-rw-r--r--arch/arm/mach-spear/spear1340.c32
-rw-r--r--arch/arm/mach-spear/spear13xx-dma.h128
-rw-r--r--arch/arm/mach-spear/spear13xx.c60
-rw-r--r--arch/arm/mach-versatile/core.c26
-rw-r--r--arch/arm/mach-versatile/versatile_dt.c1
-rw-r--r--arch/arm/mach-vexpress/v2m.c25
-rw-r--r--arch/arm/mach-virt/virt.c9
-rw-r--r--arch/arm64/include/asm/arch_timer.h5
-rw-r--r--arch/arm64/kernel/time.c6
64 files changed, 484 insertions, 1204 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 18bef301d6e6..34ef016626ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1059,6 +1059,7 @@ config PLAT_VERSATILE
config ARM_TIMER_SP804
bool
select CLKSRC_MMIO
+ select CLKSRC_OF if OF
source arch/arm/mm/Kconfig
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e6611eaa2885..5f1f4dfd706e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -194,6 +194,8 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra30-cardhu-a04.dtb \
tegra114-dalmore.dtb \
tegra114-pluto.dtb
+dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
+ versatile-pb.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index f8f7370e8669..bf18a735c37d 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -108,6 +108,7 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <21 4 0>;
+ #dma-cells = <2>;
};
pinctrl@fffff200 {
@@ -533,6 +534,8 @@
compatible = "atmel,hsmci";
reg = <0xfff80000 0x600>;
interrupts = <11 4 0>;
+ dmas = <&dma 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -542,6 +545,8 @@
compatible = "atmel,hsmci";
reg = <0xfffd0000 0x600>;
interrupts = <29 4 0>;
+ dmas = <&dma 1 13>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index b2961f1ea51b..3de8e6dfbcb1 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -89,6 +89,8 @@
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
interrupts = <12 4 0>;
+ dmas = <&dma 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -110,6 +112,7 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <20 4 0>;
+ #dma-cells = <2>;
};
pinctrl@fffff400 {
@@ -378,6 +381,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
interrupts = <9 4 6>;
+ dmas = <&dma 1 13>,
+ <&dma 1 14>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -387,6 +393,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
interrupts = <10 4 6>;
+ dmas = <&dma 1 15>,
+ <&dma 1 16>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 640b3bbbb706..1145ac330fb7 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -104,12 +104,14 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <20 4 0>;
+ #dma-cells = <2>;
};
dma1: dma-controller@ffffee00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffee00 0x200>;
interrupts = <21 4 0>;
+ #dma-cells = <2>;
};
pinctrl@fffff400 {
@@ -465,6 +467,8 @@
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;
interrupts = <12 4 0>;
+ dmas = <&dma0 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -474,6 +478,8 @@
compatible = "atmel,hsmci";
reg = <0xf000c000 0x600>;
interrupts = <26 4 0>;
+ dmas = <&dma1 1 0>;
+ dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -535,6 +541,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8010000 0x100>;
interrupts = <9 4 6>;
+ dmas = <&dma0 1 7>,
+ <&dma0 1 8>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -546,6 +555,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8014000 0x100>;
interrupts = <10 4 6>;
+ dmas = <&dma1 1 5>,
+ <&dma1 1 6>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -557,6 +569,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf8018000 0x100>;
interrupts = <11 4 6>;
+ dmas = <&dma0 1 9>,
+ <&dma0 1 10>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts
index 8b119399025a..ff1aea0ee043 100644
--- a/arch/arm/boot/dts/integratorcp.dts
+++ b/arch/arm/boot/dts/integratorcp.dts
@@ -24,15 +24,15 @@
};
timer0: timer@13000000 {
- compatible = "arm,sp804", "arm,primecell";
+ compatible = "arm,integrator-cp-timer";
};
timer1: timer@13000100 {
- compatible = "arm,sp804", "arm,primecell";
+ compatible = "arm,integrator-cp-timer";
};
timer2: timer@13000200 {
- compatible = "arm,sp804", "arm,primecell";
+ compatible = "arm,integrator-cp-timer";
};
pic: pic@14000000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 39b0458d365a..2e643ea51cce 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -60,6 +60,8 @@
compatible = "atmel,hsmci";
reg = <0xf0000000 0x600>;
interrupts = <21 4 0>;
+ dmas = <&dma0 2 0>;
+ dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
status = "disabled";
@@ -111,6 +113,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0014000 0x4000>;
interrupts = <18 4 6>;
+ dmas = <&dma0 2 7>,
+ <&dma0 2 8>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
@@ -122,6 +127,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf0018000 0x4000>;
interrupts = <19 4 6>;
+ dmas = <&dma0 2 9>,
+ <&dma0 2 10>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
@@ -167,6 +175,8 @@
compatible = "atmel,hsmci";
reg = <0xf8000000 0x600>;
interrupts = <22 4 0>;
+ dmas = <&dma1 2 0>;
+ dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
status = "disabled";
@@ -178,6 +188,8 @@
compatible = "atmel,hsmci";
reg = <0xf8004000 0x600>;
interrupts = <23 4 0>;
+ dmas = <&dma1 2 1>;
+ dma-names = "rxtx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
status = "disabled";
@@ -294,6 +306,9 @@
compatible = "atmel,at91sam9x5-i2c";
reg = <0xf801c000 0x4000>;
interrupts = <20 4 6>;
+ dmas = <&dma1 2 11>,
+ <&dma1 2 12>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -348,14 +363,14 @@
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe600 0x200>;
interrupts = <30 4 0>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
};
dma1: dma-controller@ffffe800 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffe800 0x200>;
interrupts = <31 4 0>;
- #dma-cells = <1>;
+ #dma-cells = <2>;
};
ramc0: ramc@ffffea00 {
diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts
index d2739f8d7ae9..6bebfcdcb1d1 100644
--- a/arch/arm/boot/dts/sama5d34ek.dts
+++ b/arch/arm/boot/dts/sama5d34ek.dts
@@ -12,7 +12,7 @@
/ {
model = "Atmel SAMA5D34-EK";
- compatible = "atmel,sama5d34ek", "atmel,sama5ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d34ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
ahb {
apb {
diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi
index c511c4772efd..54d128d35681 100644
--- a/arch/arm/boot/dts/spear1340.dtsi
+++ b/arch/arm/boot/dts/spear1340.dtsi
@@ -113,6 +113,9 @@
reg = <0xb4100000 0x1000>;
interrupts = <0 105 0x4>;
status = "disabled";
+ dmas = <&dwdma0 0x600 0 0 1>, /* 0xC << 11 */
+ <&dwdma0 0x680 0 1 0>; /* 0xD << 7 */
+ dma-names = "tx", "rx";
};
thermal@e07008c4 {
diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi
index b4ca60f4eb42..45597fd91050 100644
--- a/arch/arm/boot/dts/spear13xx.dtsi
+++ b/arch/arm/boot/dts/spear13xx.dtsi
@@ -98,13 +98,24 @@
reg = <0xb2800000 0x1000>;
interrupts = <0 29 0x4>;
status = "disabled";
+ dmas = <&dwdma0 0 0 0 0>;
+ dma-names = "data";
};
- dma@ea800000 {
+ dwdma0: dma@ea800000 {
compatible = "snps,dma-spear1340";
reg = <0xea800000 0x1000>;
interrupts = <0 19 0x4>;
status = "disabled";
+
+ dma-channels = <8>;
+ #dma-cells = <3>;
+ dma-requests = <32>;
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ dma-masters = <2>;
+ data_width = <3 3 0 0>;
};
dma@eb000000 {
@@ -112,6 +123,15 @@
reg = <0xeb000000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
+
+ dma-requests = <32>;
+ dma-channels = <8>;
+ dma-masters = <2>;
+ #dma-cells = <3>;
+ chan_allocation_order = <1>;
+ chan_priority = <1>;
+ block_size = <0xfff>;
+ data_width = <3 3 0 0>;
};
fsmc: flash@b0000000 {
@@ -261,6 +281,9 @@
#size-cells = <0>;
interrupts = <0 31 0x4>;
status = "disabled";
+ dmas = <&dwdma0 0x2000 0 0 0>, /* 0x4 << 11 */
+ <&dwdma0 0x0280 0 0 0>; /* 0x5 << 7 */
+ dma-names = "tx", "rx";
};
rtc@e0580000 {
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index e2fe3195c0d1..dde75ae8b4b1 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -121,6 +121,18 @@
interrupts = <0>;
};
+ timer@101e2000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x101e2000 0x1000>;
+ interrupts = <4>;
+ };
+
+ timer@101e3000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x101e3000 0x1000>;
+ interrupts = <5>;
+ };
+
gpio0: gpio@101e4000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x101e4000 0x1000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
index 1420bb14d95c..62d9b225dcce 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts
@@ -98,6 +98,7 @@
<0 49 4>;
clocks = <&oscclk2>, <&oscclk2>;
clock-names = "timclk", "apb_pclk";
+ status = "disabled";
};
watchdog@100e5000 {
diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c
index 9d2d3ba339ff..ddc740769601 100644
--- a/arch/arm/common/timer-sp.c
+++ b/arch/arm/common/timer-sp.c
@@ -25,33 +25,29 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <asm/sched_clock.h>
#include <asm/hardware/arm_timer.h>
+#include <asm/hardware/timer-sp.h>
-static long __init sp804_get_clock_rate(const char *name)
+static long __init sp804_get_clock_rate(struct clk *clk)
{
- struct clk *clk;
long rate;
int err;
- clk = clk_get_sys("sp804", name);
- if (IS_ERR(clk)) {
- pr_err("sp804: %s clock not found: %d\n", name,
- (int)PTR_ERR(clk));
- return PTR_ERR(clk);
- }
-
err = clk_prepare(clk);
if (err) {
- pr_err("sp804: %s clock failed to prepare: %d\n", name, err);
+ pr_err("sp804: clock failed to prepare: %d\n", err);
clk_put(clk);
return err;
}
err = clk_enable(clk);
if (err) {
- pr_err("sp804: %s clock failed to enable: %d\n", name, err);
+ pr_err("sp804: clock failed to enable: %d\n", err);
clk_unprepare(clk);
clk_put(clk);
return err;
@@ -59,7 +55,7 @@ static long __init sp804_get_clock_rate(const char *name)
rate = clk_get_rate(clk);
if (rate < 0) {
- pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
+ pr_err("sp804: clock failed to get rate: %ld\n", rate);
clk_disable(clk);
clk_unprepare(clk);
clk_put(clk);
@@ -77,9 +73,21 @@ static u32 sp804_read(void)
void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name,
+ struct clk *clk,
int use_sched_clock)
{
- long rate = sp804_get_clock_rate(name);
+ long rate;
+
+ if (!clk) {
+ clk = clk_get_sys("sp804", name);
+ if (IS_ERR(clk)) {
+ pr_err("sp804: clock not found: %d\n",
+ (int)PTR_ERR(clk));
+ return;
+ }
+ }
+
+ rate = sp804_get_clock_rate(clk);
if (rate < 0)
return;
@@ -171,12 +179,20 @@ static struct irqaction sp804_timer_irq = {
.dev_id = &sp804_clockevent,
};
-void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
- const char *name)
+void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
- long rate = sp804_get_clock_rate(name);
+ long rate;
+ if (!clk)
+ clk = clk_get_sys("sp804", name);
+ if (IS_ERR(clk)) {
+ pr_err("sp804: %s clock not found: %d\n", name,
+ (int)PTR_ERR(clk));
+ return;
+ }
+
+ rate = sp804_get_clock_rate(clk);
if (rate < 0)
return;
@@ -186,6 +202,98 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
evt->irq = irq;
evt->cpumask = cpu_possible_mask;
+ writel(0, base + TIMER_CTRL);
+
setup_irq(irq, &sp804_timer_irq);
clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
}
+
+static void __init sp804_of_init(struct device_node *np)
+{
+ static bool initialized = false;
+ void __iomem *base;
+ int irq;
+ u32 irq_num = 0;
+ struct clk *clk1, *clk2;
+ const char *name = of_get_property(np, "compatible", NULL);
+
+ base = of_iomap(np, 0);
+ if (WARN_ON(!base))
+ return;
+
+ /* Ensure timers are disabled */
+ writel(0, base + TIMER_CTRL);
+ writel(0, base + TIMER_2_BASE + TIMER_CTRL);
+
+ if (initialized || !of_device_is_available(np))
+ goto err;
+
+ clk1 = of_clk_get(np, 0);
+ if (IS_ERR(clk1))
+ clk1 = NULL;
+
+ /* Get the 2nd clock if the timer has 2 timer clocks */
+ if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) {
+ clk2 = of_clk_get(np, 1);
+ if (IS_ERR(clk2)) {
+ pr_err("sp804: %s clock not found: %d\n", np->name,
+ (int)PTR_ERR(clk2));
+ goto err;
+ }
+ } else
+ clk2 = clk1;
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0)
+ goto err;
+
+ of_property_read_u32(np, "arm,sp804-has-irq", &irq_num);
+ if (irq_num == 2) {
+ __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name);
+ __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1);
+ } else {
+ __sp804_clockevents_init(base, irq, clk1 , name);
+ __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE,
+ name, clk2, 1);
+ }
+ initialized = true;
+
+ return;
+err:
+ iounmap(base);
+}
+CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init);
+
+static void __init integrator_cp_of_init(struct device_node *np)
+{
+ static int init_count = 0;
+ void __iomem *base;
+ int irq;
+ const char *name = of_get_property(np, "compatible", NULL);
+
+ base = of_iomap(np, 0);
+ if (WARN_ON(!base))
+ return;
+
+ /* Ensure timer is disabled */
+ writel(0, base + TIMER_CTRL);
+
+ if (init_count == 2 || !of_device_is_available(np))
+ goto err;
+
+ if (!init_count)
+ sp804_clocksource_init(base, name);
+ else {
+ irq = irq_of_parse_and_map(np, 0);
+ if (irq <= 0)
+ goto err;
+
+ sp804_clockevents_init(base, irq, name);
+ }
+
+ init_count++;
+ return;
+err:
+ iounmap(base);
+}
+CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init);
diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h
index 7ade91d8cc6f..7c1bfc0aea0c 100644
--- a/arch/arm/include/asm/arch_timer.h
+++ b/arch/arm/include/asm/arch_timer.h
@@ -10,8 +10,7 @@
#include <clocksource/arm_arch_timer.h>
#ifdef CONFIG_ARM_ARCH_TIMER
-int arch_timer_of_register(void);
-int arch_timer_sched_clock_init(void);
+int arch_timer_arch_init(void);
/*
* These register accessors are marked inline so the compiler can
@@ -110,16 +109,6 @@ static inline void __cpuinit arch_counter_set_user_access(void)
asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl));
}
-#else
-static inline int arch_timer_of_register(void)
-{
- return -ENXIO;
-}
-
-static inline int arch_timer_sched_clock_init(void)
-{
- return -ENXIO;
-}
#endif
#endif
diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h
index 2dd9d3f83f29..bb28af7c32de 100644
--- a/arch/arm/include/asm/hardware/timer-sp.h
+++ b/arch/arm/include/asm/hardware/timer-sp.h
@@ -1,15 +1,23 @@
+struct clk;
+
void __sp804_clocksource_and_sched_clock_init(void __iomem *,
- const char *, int);
+ const char *, struct clk *, int);
+void __sp804_clockevents_init(void __iomem *, unsigned int,
+ struct clk *, const char *);
static inline void sp804_clocksource_init(void __iomem *base, const char *name)
{
- __sp804_clocksource_and_sched_clock_init(base, name, 0);
+ __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0);
}
static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base,
const char *name)
{
- __sp804_clocksource_and_sched_clock_init(base, name, 1);
+ __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1);
}
-void sp804_clockevents_init(void __iomem *, unsigned int, const char *);
+static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name)
+{
+ __sp804_clockevents_init(base, irq, NULL, name);
+
+}
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index e3f757263438..3d520ddca61b 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -11,4 +11,6 @@
extern void sched_clock_postinit(void);
extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
+extern unsigned long long (*sched_clock_func)(void);
+
#endif
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index d957a51435d8..59dcdced6e30 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -22,9 +22,11 @@ static unsigned long arch_timer_read_counter_long(void)
return arch_timer_read_counter();
}
-static u32 arch_timer_read_counter_u32(void)
+static u32 sched_clock_mult __read_mostly;
+
+static unsigned long long notrace arch_timer_sched_clock(void)
{
- return arch_timer_read_counter();
+ return arch_timer_read_counter() * sched_clock_mult;
}
static struct delay_timer arch_delay_timer;
@@ -37,25 +39,20 @@ static void __init arch_timer_delay_timer_register(void)
register_current_timer_delay(&arch_delay_timer);
}
-int __init arch_timer_of_register(void)
+int __init arch_timer_arch_init(void)
{
- int ret;
+ u32 arch_timer_rate = arch_timer_get_rate();
- ret = arch_timer_init();
- if (ret)
- return ret;
+ if (arch_timer_rate == 0)
+ return -ENXIO;
arch_timer_delay_timer_register();
- return 0;
-}
-
-int __init arch_timer_sched_clock_init(void)
-{
- if (arch_timer_get_rate() == 0)
- return -ENXIO;
+ /* Cache the sched_clock multiplier to save a divide in the hot path. */
+ sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
+ sched_clock_func = arch_timer_sched_clock;
+ pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n",
+ arch_timer_rate / 1000, sched_clock_mult);
- setup_sched_clock(arch_timer_read_counter_u32,
- 32, arch_timer_get_rate());
return 0;
}
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 59d2adb764a9..e8edcaa0e432 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -20,6 +20,7 @@ struct clock_data {
u64 epoch_ns;
u32 epoch_cyc;
u32 epoch_cyc_copy;
+ unsigned long rate;
u32 mult;
u32 shift;
bool suspended;
@@ -113,11 +114,14 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
u64 res, wrap;
char r_unit;
+ if (cd.rate > rate)
+ return;
+
BUG_ON(bits > 32);
WARN_ON(!irqs_disabled());
- WARN_ON(read_sched_clock != jiffy_sched_clock_read);
read_sched_clock = read;
sched_clock_mask = (1 << bits) - 1;
+ cd.rate = rate;
/* calculate the mult/shift to convert counter ticks to ns. */
clocks_calc_mult_shift(&cd.mult, &cd.shift, rate, NSEC_PER_SEC, 0);
@@ -161,12 +165,19 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
pr_debug("Registered %pF as sched_clock source\n", read);
}
-unsigned long long notrace sched_clock(void)
+static unsigned long long notrace sched_clock_32(void)
{
u32 cyc = read_sched_clock();
return cyc_to_sched_clock(cyc, sched_clock_mask);
}
+unsigned long long __read_mostly (*sched_clock_func)(void) = sched_clock_32;
+
+unsigned long long notrace sched_clock(void)
+{
+ return sched_clock_func();
+}
+
void __init sched_clock_postinit(void)
{
/*
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 955d92d265e5..abff4e9aaee0 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -22,6 +22,7 @@
#include <linux/errno.h>
#include <linux/profile.h>
#include <linux/timer.h>
+#include <linux/clocksource.h>
#include <linux/irq.h>
#include <asm/thread_info.h>
@@ -115,6 +116,10 @@ int __init register_persistent_clock(clock_access_fn read_boot,
void __init time_init(void)
{
- machine_desc->init_time();
+ if (machine_desc->init_time)
+ machine_desc->init_time();
+ else
+ clocksource_of_init();
+
sched_clock_postinit();
}
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index 48f1228c611c..69f9e3bbf4e5 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -36,6 +36,8 @@ static int at91_enter_idle(struct cpuidle_device *dev,
at91rm9200_standby();
else if (cpu_is_at91sam9g45())
at91sam9g45_standby();
+ else if (cpu_is_at91sam9263())
+ at91sam9263_standby();
else
at91sam9_standby();
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index 0f3379fe645f..d3d7b993846b 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -86,7 +86,7 @@ enum at91_soc_type {
AT91_SOC_SAMA5D3,
/* Unknown type */
- AT91_SOC_NONE
+ AT91_SOC_UNKNOWN,
};
enum at91_soc_subtype {
@@ -107,8 +107,11 @@ enum at91_soc_subtype {
AT91_SOC_SAMA5D31, AT91_SOC_SAMA5D33, AT91_SOC_SAMA5D34,
AT91_SOC_SAMA5D35,
+ /* No subtype for this SoC */
+ AT91_SOC_SUBTYPE_NONE,
+
/* Unknown subtype */
- AT91_SOC_SUBTYPE_NONE
+ AT91_SOC_SUBTYPE_UNKNOWN,
};
struct at91_socinfo {
@@ -122,7 +125,7 @@ const char *at91_get_soc_subtype(struct at91_socinfo *c);
static inline int at91_soc_is_detected(void)
{
- return at91_soc_initdata.type != AT91_SOC_NONE;
+ return at91_soc_initdata.type != AT91_SOC_UNKNOWN;
}
#ifdef CONFIG_SOC_AT91RM9200
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 73f1f250403a..530db304ec5e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -270,6 +270,8 @@ static int at91_pm_enter(suspend_state_t state)
at91rm9200_standby();
else if (cpu_is_at91sam9g45())
at91sam9g45_standby();
+ else if (cpu_is_at91sam9263())
+ at91sam9263_standby();
else
at91sam9_standby();
break;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 38f467c6b710..2f5908f0b8c5 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -70,13 +70,31 @@ static inline void at91sam9g45_standby(void)
at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
}
-#ifdef CONFIG_SOC_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
*/
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
+static inline void at91sam9263_standby(void)
+{
+ u32 lpr0, lpr1;
+ u32 saved_lpr0, saved_lpr1;
+
+ saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+ lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+ lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+ lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+ lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+ /* self-refresh mode now */
+ at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+ at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+ cpu_do_idle();
+
+ at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+ at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
static inline void at91sam9_standby(void)
{
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index e8491e77b1f7..e2f4bdd146d6 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,28 +105,32 @@ static void __init soc_detect(u32 dbgu_base)
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
- if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+ if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
at91_boot_soc = at91rm9200_soc;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9263_soc;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9260_soc;
break;
@@ -139,6 +143,7 @@ static void __init soc_detect(u32 dbgu_base)
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9rl_soc;
break;
@@ -161,6 +166,7 @@ static void __init soc_detect(u32 dbgu_base)
/* at91sam9g10 */
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
at91_boot_soc = at91sam9261_soc;
}
/* at91sam9xe */
@@ -242,7 +248,7 @@ static const char *soc_name[] = {
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
- [AT91_SOC_NONE] = "Unknown"
+ [AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
@@ -268,7 +274,8 @@ static const char *soc_subtype_name[] = {
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
- [AT91_SOC_SUBTYPE_NONE] = "Unknown"
+ [AT91_SOC_SUBTYPE_NONE] = "None",
+ [AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
@@ -282,8 +289,8 @@ void __init at91_map_io(void)
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
- at91_soc_initdata.type = AT91_SOC_NONE;
- at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
+ at91_soc_initdata.type = AT91_SOC_UNKNOWN;
+ at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
@@ -294,8 +301,9 @@ void __init at91_map_io(void)
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
- pr_info("AT91: Detected soc subtype: %s\n",
- at91_get_soc_subtype(&at91_soc_initdata));
+ if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
+ pr_info("AT91: Detected soc subtype: %s\n",
+ at91_get_soc_subtype(&at91_soc_initdata));
if (!at91_soc_is_enabled())
panic("AT91: Soc not enabled");
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 76c1170b3528..e7df2dd43a40 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -15,6 +15,7 @@
*/
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/irq.h>
@@ -28,12 +29,9 @@
#include <linux/amba/bus.h>
#include <linux/clk-provider.h>
-#include <asm/arch_timer.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/timer-sp.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -90,36 +88,16 @@ static void __init highbank_init_irq(void)
#endif
}
-static struct clk_lookup lookup = {
- .dev_id = "sp804",
- .con_id = NULL,
-};
-
static void __init highbank_timer_init(void)
{
- int irq;
struct device_node *np;
- void __iomem *timer_base;
/* Map system registers */
np = of_find_compatible_node(NULL, NULL, "calxeda,hb-sregs");
sregs_base = of_iomap(np, 0);
WARN_ON(!sregs_base);
- np = of_find_compatible_node(NULL, NULL, "arm,sp804");
- timer_base = of_iomap(np, 0);
- WARN_ON(!timer_base);
- irq = irq_of_parse_and_map(np, 0);
-
of_clk_init(NULL);
- lookup.clk = of_clk_get(np, 0);
- clkdev_add(&lookup);
-
- sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1");
- sp804_clockevents_init(timer_base, irq, "timer0");
-
- arch_timer_of_register();
- arch_timer_sched_clock_init();
clocksource_of_init();
}
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index da1091be0887..8c60fcb08a98 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -250,39 +250,6 @@ static void __init intcp_init_early(void)
}
#ifdef CONFIG_OF
-
-static void __init cp_of_timer_init(void)
-{
- struct device_node *node;
- const char *path;
- void __iomem *base;
- int err;
- int irq;
-
- err = of_property_read_string(of_aliases,
- "arm,timer-primary", &path);
- if (WARN_ON(err))
- return;
- node = of_find_node_by_path(path);
- base = of_iomap(node, 0);
- if (WARN_ON(!base))
- return;
- writel(0, base + TIMER_CTRL);
- sp804_clocksource_init(base, node->name);
-
- err = of_property_read_string(of_aliases,
- "arm,timer-secondary", &path);
- if (WARN_ON(err))
- return;
- node = of_find_node_by_path(path);
- base = of_iomap(node, 0);
- if (WARN_ON(!base))
- return;
- irq = irq_of_parse_and_map(node, 0);
- writel(0, base + TIMER_CTRL);
- sp804_clockevents_init(base, irq, node->name);
-}
-
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
@@ -383,7 +350,6 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
.handle_irq = fpga_handle_irq,
- .init_time = cp_of_timer_init,
.init_machine = intcp_init_of,
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index ba769e082ad4..2d04f0e21870 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -5,6 +5,6 @@ AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
obj-y += system-controller.o
obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o
-obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o irq-armada-370-xp.o
+obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 12d3655830d1..42a4cb3087e2 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -20,6 +20,8 @@
#include <linux/clk/mvebu.h>
#include <linux/dma-mapping.h>
#include <linux/mbus.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
@@ -72,6 +74,10 @@ void __init armada_370_xp_init_early(void)
ARMADA_370_XP_MBUS_WINS_SIZE,
ARMADA_370_XP_SDRAM_WINS_BASE,
ARMADA_370_XP_SDRAM_WINS_SIZE);
+
+#ifdef CONFIG_CACHE_L2X0
+ l2x0_of_init(0, ~0UL);
+#endif
}
static void __init armada_370_xp_dt_init(void)
@@ -90,8 +96,7 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.init_machine = armada_370_xp_dt_init,
.map_io = armada_370_xp_map_io,
.init_early = armada_370_xp_init_early,
- .init_irq = armada_370_xp_init_irq,
- .handle_irq = armada_370_xp_handle_irq,
+ .init_irq = irqchip_init,
.init_time = armada_370_xp_timer_and_clk_init,
.restart = mvebu_restart,
.dt_compat = armada_370_xp_dt_compat,
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c
deleted file mode 100644
index 830139a3e2ba..000000000000
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * Marvell Armada 370 and Armada XP SoC IRQ handling
- *
- * Copyright (C) 2012 Marvell
- *
- * Lior Amsalem <alior@marvell.com>
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- * Ben Dooks <ben.dooks@codethink.co.uk>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-#include <asm/mach/arch.h>
-#include <asm/exception.h>
-#include <asm/smp_plat.h>
-#include <asm/hardware/cache-l2x0.h>
-
-/* Interrupt Controller Registers Map */
-#define ARMADA_370_XP_INT_SET_MASK_OFFS (0x48)
-#define ARMADA_370_XP_INT_CLEAR_MASK_OFFS (0x4C)
-
-#define ARMADA_370_XP_INT_CONTROL (0x00)
-#define ARMADA_370_XP_INT_SET_ENABLE_OFFS (0x30)
-#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
-#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
-
-#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
-
-#define ARMADA_370_XP_SW_TRIG_INT_OFFS (0x4)
-#define ARMADA_370_XP_IN_DRBEL_MSK_OFFS (0xc)
-#define ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS (0x8)
-
-#define ARMADA_370_XP_MAX_PER_CPU_IRQS (28)
-
-#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ (5)
-
-#define ACTIVE_DOORBELLS (8)
-
-static DEFINE_RAW_SPINLOCK(irq_controller_lock);
-
-static void __iomem *per_cpu_int_base;
-static void __iomem *main_int_base;
-static struct irq_domain *armada_370_xp_mpic_domain;
-
-/*
- * In SMP mode:
- * For shared global interrupts, mask/unmask global enable bit
- * For CPU interrupts, mask/unmask the calling CPU's bit
- */
-static void armada_370_xp_irq_mask(struct irq_data *d)
-{
- irq_hw_number_t hwirq = irqd_to_hwirq(d);
-
- if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
- writel(hwirq, main_int_base +
- ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
- else
- writel(hwirq, per_cpu_int_base +
- ARMADA_370_XP_INT_SET_MASK_OFFS);
-}
-
-static void armada_370_xp_irq_unmask(struct irq_data *d)
-{
- irq_hw_number_t hwirq = irqd_to_hwirq(d);
-
- if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
- writel(hwirq, main_int_base +
- ARMADA_370_XP_INT_SET_ENABLE_OFFS);
- else
- writel(hwirq, per_cpu_int_base +
- ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-}
-
-#ifdef CONFIG_SMP
-static int armada_xp_set_affinity(struct irq_data *d,
- const struct cpumask *mask_val, bool force)
-{
- unsigned long reg;
- unsigned long new_mask = 0;
- unsigned long online_mask = 0;
- unsigned long count = 0;
- irq_hw_number_t hwirq = irqd_to_hwirq(d);
- int cpu;
-
- for_each_cpu(cpu, mask_val) {
- new_mask |= 1 << cpu_logical_map(cpu);
- count++;
- }
-
- /*
- * Forbid mutlicore interrupt affinity
- * This is required since the MPIC HW doesn't limit
- * several CPUs from acknowledging the same interrupt.
- */
- if (count > 1)
- return -EINVAL;
-
- for_each_cpu(cpu, cpu_online_mask)
- online_mask |= 1 << cpu_logical_map(cpu);
-
- raw_spin_lock(&irq_controller_lock);
-
- reg = readl(main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
- reg = (reg & (~online_mask)) | new_mask;
- writel(reg, main_int_base + ARMADA_370_XP_INT_SOURCE_CTL(hwirq));
-
- raw_spin_unlock(&irq_controller_lock);
-
- return 0;
-}
-#endif
-
-static struct irq_chip armada_370_xp_irq_chip = {
- .name = "armada_370_xp_irq",
- .irq_mask = armada_370_xp_irq_mask,
- .irq_mask_ack = armada_370_xp_irq_mask,
- .irq_unmask = armada_370_xp_irq_unmask,
-#ifdef CONFIG_SMP
- .irq_set_affinity = armada_xp_set_affinity,
-#endif
-};
-
-static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
- unsigned int virq, irq_hw_number_t hw)
-{
- armada_370_xp_irq_mask(irq_get_irq_data(virq));
- if (hw != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
- writel(hw, per_cpu_int_base +
- ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
- else
- writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
- irq_set_status_flags(virq, IRQ_LEVEL);
-
- if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
- irq_set_percpu_devid(virq);
- irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
- handle_percpu_devid_irq);
-
- } else {
- irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
- handle_level_irq);
- }
- set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
-}
-
-#ifdef CONFIG_SMP
-void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq)
-{
- int cpu;
- unsigned long map = 0;
-
- /* Convert our logical CPU mask into a physical one. */
- for_each_cpu(cpu, mask)
- map |= 1 << cpu_logical_map(cpu);
-
- /*
- * Ensure that stores to Normal memory are visible to the
- * other CPUs before issuing the IPI.
- */
- dsb();
-
- /* submit softirq */
- writel((map << 8) | irq, main_int_base +
- ARMADA_370_XP_SW_TRIG_INT_OFFS);
-}
-
-void armada_xp_mpic_smp_cpu_init(void)
-{
- /* Clear pending IPIs */
- writel(0, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
-
- /* Enable first 8 IPIs */
- writel((1 << ACTIVE_DOORBELLS) - 1, per_cpu_int_base +
- ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
-
- /* Unmask IPI interrupt */
- writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
-}
-#endif /* CONFIG_SMP */
-
-static struct irq_domain_ops armada_370_xp_mpic_irq_ops = {
- .map = armada_370_xp_mpic_irq_map,
- .xlate = irq_domain_xlate_onecell,
-};
-
-static int __init armada_370_xp_mpic_of_init(struct device_node *node,
- struct device_node *parent)
-{
- u32 control;
-
- main_int_base = of_iomap(node, 0);
- per_cpu_int_base = of_iomap(node, 1);
-
- BUG_ON(!main_int_base);
- BUG_ON(!per_cpu_int_base);
-
- control = readl(main_int_base + ARMADA_370_XP_INT_CONTROL);
-
- armada_370_xp_mpic_domain =
- irq_domain_add_linear(node, (control >> 2) & 0x3ff,
- &armada_370_xp_mpic_irq_ops, NULL);
-
- if (!armada_370_xp_mpic_domain)
- panic("Unable to add Armada_370_Xp MPIC irq domain (DT)\n");
-
- irq_set_default_host(armada_370_xp_mpic_domain);
-
-#ifdef CONFIG_SMP
- armada_xp_mpic_smp_cpu_init();
-
- /*
- * Set the default affinity from all CPUs to the boot cpu.
- * This is required since the MPIC doesn't limit several CPUs
- * from acknowledging the same interrupt.
- */
- cpumask_clear(irq_default_affinity);
- cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
-
-#endif
-
- return 0;
-}
-
-asmlinkage void __exception_irq_entry armada_370_xp_handle_irq(struct pt_regs
- *regs)
-{
- u32 irqstat, irqnr;
-
- do {
- irqstat = readl_relaxed(per_cpu_int_base +
- ARMADA_370_XP_CPU_INTACK_OFFS);
- irqnr = irqstat & 0x3FF;
-
- if (irqnr > 1022)
- break;
-
- if (irqnr > 0) {
- irqnr = irq_find_mapping(armada_370_xp_mpic_domain,
- irqnr);
- handle_IRQ(irqnr, regs);
- continue;
- }
-#ifdef CONFIG_SMP
- /* IPI Handling */
- if (irqnr == 0) {
- u32 ipimask, ipinr;
-
- ipimask = readl_relaxed(per_cpu_int_base +
- ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
- & 0xFF;
-
- writel(0x0, per_cpu_int_base +
- ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
-
- /* Handle all pending doorbells */
- for (ipinr = 0; ipinr < ACTIVE_DOORBELLS; ipinr++) {
- if (ipimask & (0x1 << ipinr))
- handle_IPI(ipinr, regs);
- }
- continue;
- }
-#endif
-
- } while (1);
-}
-
-static const struct of_device_id mpic_of_match[] __initconst = {
- {.compatible = "marvell,mpic", .data = armada_370_xp_mpic_of_init},
- {},
-};
-
-void __init armada_370_xp_init_irq(void)
-{
- of_irq_init(mpic_of_match);
-#ifdef CONFIG_CACHE_L2X0
- l2x0_of_init(0, ~0UL);
-#endif
-}
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 5b86423c89fa..244d8a5aa54b 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -108,24 +108,13 @@ static struct platform_device *sdp2430_devices[] __initdata = {
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
-static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
- gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
- return 0;
-}
-
-static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
static struct panel_generic_dpi_data sdp2430_panel_data = {
.name = "nec_nl2432dr22-11b",
- .platform_enable = sdp2430_panel_enable_lcd,
- .platform_disable = sdp2430_panel_disable_lcd,
+ .num_gpios = 2,
+ .gpios = {
+ SDP2430_LCD_PANEL_ENABLE_GPIO,
+ SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
+ },
};
static struct omap_dss_device sdp2430_lcd_device = {
@@ -146,26 +135,6 @@ static struct omap_dss_board_info sdp2430_dss_data = {
.default_device = &sdp2430_lcd_device,
};
-static void __init sdp2430_display_init(void)
-{
- int r;
-
- static struct gpio gpios[] __initdata = {
- { SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
- "LCD reset" },
- { SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
- "LCD Backlight" },
- };
-
- r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
- if (r) {
- pr_err("Cannot request LCD GPIOs, error %d\n", r);
- return;
- }
-
- omap_display_init(&sdp2430_dss_data);
-}
-
#if IS_ENABLED(CONFIG_SMC91X)
static struct omap_smc91x_platform_data board_smc91x_data = {
@@ -273,7 +242,7 @@ static void __init omap_2430sdp_init(void)
gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
"Secondary LCD backlight");
- sdp2430_display_init();
+ omap_display_init(&sdp2430_dss_data);
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index a4d4664894e1..23b004afa3f8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -108,53 +108,38 @@ static struct twl4030_keypad_data sdp3430_kp_data = {
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
-static struct gpio sdp3430_dss_gpios[] __initdata = {
- {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" },
- {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"},
-};
-
static void __init sdp3430_display_init(void)
{
int r;
- r = gpio_request_array(sdp3430_dss_gpios,
- ARRAY_SIZE(sdp3430_dss_gpios));
+ /*
+ * the backlight GPIO doesn't directly go to the panel, it enables
+ * an internal circuit on 3430sdp to create the signal V_BKL_28V,
+ * this is connected to LED+ pin of the sharp panel. This GPIO
+ * is left enabled in the board file, and not passed to the panel
+ * as platform_data.
+ */
+ r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
+ GPIOF_OUT_INIT_HIGH, "LCD Backlight");
if (r)
- printk(KERN_ERR "failed to get LCD control GPIOs\n");
-
-}
+ pr_err("failed to get LCD Backlight GPIO\n");
-static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1);
- gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1);
-
- return 0;
-}
-
-static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0);
- gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0);
-}
-
-static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
-{
}
+static struct panel_sharp_ls037v7dw01_data sdp3430_lcd_data = {
+ .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
+ .ini_gpio = -1,
+ .mo_gpio = -1,
+ .lr_gpio = -1,
+ .ud_gpio = -1,
+};
static struct omap_dss_device sdp3430_lcd_device = {
.name = "lcd",
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
- .platform_enable = sdp3430_panel_enable_lcd,
- .platform_disable = sdp3430_panel_disable_lcd,
+ .data = &sdp3430_lcd_data,
};
static struct tfp410_platform_data dvi_panel = {
@@ -175,8 +160,6 @@ static struct omap_dss_device sdp3430_tv_device = {
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = sdp3430_panel_enable_tv,
- .platform_disable = sdp3430_panel_disable_tv,
};
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 00d72902ef4f..56a9a4f855c7 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
- usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+ usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
usb_musb_init(&musb_board_data);
status = omap_ethernet_init();
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index c29d2e743688..d63f14b534b5 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -120,63 +120,14 @@ static int __init am3517_evm_i2c_init(void)
return 0;
}
-static int lcd_enabled;
-static int dvi_enabled;
-
-#if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \
- defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE)
-static struct gpio am3517_evm_dss_gpios[] __initdata = {
- /* GPIO 182 = LCD Backlight Power */
- { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" },
- /* GPIO 181 = LCD Panel PWM */
- { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" },
- /* GPIO 176 = LCD Panel Power enable pin */
- { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" },
-};
-
-static void __init am3517_evm_display_init(void)
-{
- int r;
-
- omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN);
-
- r = gpio_request_array(am3517_evm_dss_gpios,
- ARRAY_SIZE(am3517_evm_dss_gpios));
- if (r) {
- printk(KERN_ERR "failed to get DSS panel control GPIOs\n");
- return;
- }
-
- printk(KERN_INFO "Display initialized successfully\n");
-}
-#else
-static void __init am3517_evm_display_init(void) {}
-#endif
-
-static int am3517_evm_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(LCD_PANEL_PWR, 1);
- lcd_enabled = 1;
-
- return 0;
-}
-
-static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(LCD_PANEL_PWR, 0);
- lcd_enabled = 0;
-}
-
static struct panel_generic_dpi_data lcd_panel = {
.name = "sharp_lq",
- .platform_enable = am3517_evm_panel_enable_lcd,
- .platform_disable = am3517_evm_panel_disable_lcd,
+ .num_gpios = 3,
+ .gpios = {
+ LCD_PANEL_PWR,
+ LCD_PANEL_BKLIGHT_PWR,
+ LCD_PANEL_PWM,
+ },
};
static struct omap_dss_device am3517_evm_lcd_device = {
@@ -187,22 +138,11 @@ static struct omap_dss_device am3517_evm_lcd_device = {
.phy.dpi.data_lines = 16,
};
-static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void am3517_evm_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device am3517_evm_tv_device = {
.type = OMAP_DISPLAY_TYPE_VENC,
.name = "tv",
.driver_name = "venc",
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = am3517_evm_panel_enable_tv,
- .platform_disable = am3517_evm_panel_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
@@ -365,8 +305,6 @@ static void __init am3517_evm_init(void)
usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
usbhs_init(&usbhs_bdata);
am3517_evm_hecc_init(&am3517_evm_hecc_pdata);
- /* DSS */
- am3517_evm_display_init();
/* RTC - S35390A */
am3517_evm_rtc_init();
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index e0ed8c07fc54..ee6218c74807 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -190,45 +190,12 @@ static inline void cm_t35_init_nand(void) {}
#define CM_T35_LCD_BL_GPIO 58
#define CM_T35_DVI_EN_GPIO 54
-static int lcd_enabled;
-static int dvi_enabled;
-
-static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
-
- gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
- gpio_set_value(CM_T35_LCD_BL_GPIO, 1);
-
- lcd_enabled = 1;
-
- return 0;
-}
-
-static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- lcd_enabled = 0;
-
- gpio_set_value(CM_T35_LCD_BL_GPIO, 0);
- gpio_set_value(CM_T35_LCD_EN_GPIO, 0);
-}
-
-static int cm_t35_panel_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct panel_generic_dpi_data lcd_panel = {
.name = "toppoly_tdo35s",
- .platform_enable = cm_t35_panel_enable_lcd,
- .platform_disable = cm_t35_panel_disable_lcd,
+ .num_gpios = 1,
+ .gpios = {
+ CM_T35_LCD_BL_GPIO,
+ },
};
static struct omap_dss_device cm_t35_lcd_device = {
@@ -257,8 +224,6 @@ static struct omap_dss_device cm_t35_tv_device = {
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = cm_t35_panel_enable_tv,
- .platform_disable = cm_t35_panel_disable_tv,
};
static struct omap_dss_device *cm_t35_dss_devices[] = {
@@ -292,11 +257,6 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = {
},
};
-static struct gpio cm_t35_dss_gpios[] __initdata = {
- { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" },
- { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" },
-};
-
static void __init cm_t35_init_display(void)
{
int err;
@@ -304,23 +264,21 @@ static void __init cm_t35_init_display(void)
spi_register_board_info(cm_t35_lcd_spi_board_info,
ARRAY_SIZE(cm_t35_lcd_spi_board_info));
- err = gpio_request_array(cm_t35_dss_gpios,
- ARRAY_SIZE(cm_t35_dss_gpios));
+
+ err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW,
+ "lcd bl enable");
if (err) {
- pr_err("CM-T35: failed to request DSS control GPIOs\n");
+ pr_err("CM-T35: failed to request LCD EN GPIO\n");
return;
}
- gpio_export(CM_T35_LCD_EN_GPIO, 0);
- gpio_export(CM_T35_LCD_BL_GPIO, 0);
-
msleep(50);
gpio_set_value(CM_T35_LCD_EN_GPIO, 1);
err = omap_display_init(&cm_t35_dss_data);
if (err) {
pr_err("CM-T35: failed to register DSS device\n");
- gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios));
+ gpio_free(CM_T35_LCD_EN_GPIO);
}
}
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index e44b804f75ae..576420544178 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -103,19 +103,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
-static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(dssdev->reset_gpio))
- gpio_set_value_cansleep(dssdev->reset_gpio, 0);
-}
-
static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
@@ -127,8 +114,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
static struct panel_generic_dpi_data lcd_panel = {
.name = "innolux_at070tn83",
- .platform_enable = devkit8000_panel_enable_lcd,
- .platform_disable = devkit8000_panel_disable_lcd,
+ /* gpios filled in code */
};
static struct omap_dss_device devkit8000_lcd_device = {
@@ -210,8 +196,6 @@ static struct gpio_led gpio_leds[];
static int devkit8000_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
- int ret;
-
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap_hsmmc_late_init(mmc);
@@ -220,13 +204,8 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
/* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
- ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
- GPIOF_OUT_INIT_LOW, "LCD_PWREN");
- if (ret < 0) {
- devkit8000_lcd_device.reset_gpio = -EINVAL;
- printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
- }
+ lcd_panel.num_gpios = 1;
+ lcd_panel.gpios[0] = gpio + TWL4030_GPIO_MAX + 0;
/* gpio + 7 is "DVI_PD" (out, active low) */
dvi_panel.power_down_gpio = gpio + 7;
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 8a8e505a0e90..d0d17bc58d9b 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -181,34 +181,13 @@ static inline void __init ldp_init_smsc911x(void)
/* LCD */
-static int ldp_backlight_gpio;
-static int ldp_lcd_enable_gpio;
-
#define LCD_PANEL_RESET_GPIO 55
#define LCD_PANEL_QVGA_GPIO 56
-static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(ldp_lcd_enable_gpio))
- gpio_direction_output(ldp_lcd_enable_gpio, 1);
- if (gpio_is_valid(ldp_backlight_gpio))
- gpio_direction_output(ldp_backlight_gpio, 1);
-
- return 0;
-}
-
-static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- if (gpio_is_valid(ldp_lcd_enable_gpio))
- gpio_direction_output(ldp_lcd_enable_gpio, 0);
- if (gpio_is_valid(ldp_backlight_gpio))
- gpio_direction_output(ldp_backlight_gpio, 0);
-}
-
static struct panel_generic_dpi_data ldp_panel_data = {
.name = "nec_nl2432dr22-11b",
- .platform_enable = ldp_panel_enable_lcd,
- .platform_disable = ldp_panel_disable_lcd,
+ .num_gpios = 4,
+ /* gpios filled in code */
};
static struct omap_dss_device ldp_lcd_device = {
@@ -231,41 +210,19 @@ static struct omap_dss_board_info ldp_dss_data = {
static void __init ldp_display_init(void)
{
- int r;
-
- static struct gpio gpios[] __initdata = {
- {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
- {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
- };
-
- r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
- if (r) {
- pr_err("Cannot request LCD GPIOs, error %d\n", r);
- return;
- }
+ ldp_panel_data.gpios[2] = LCD_PANEL_RESET_GPIO;
+ ldp_panel_data.gpios[3] = LCD_PANEL_QVGA_GPIO;
omap_display_init(&ldp_dss_data);
}
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
{
- int r;
-
- struct gpio gpios[] = {
- {gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
- {gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
- };
-
- r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
- if (r) {
- pr_err("Cannot request LCD GPIOs, error %d\n", r);
- ldp_backlight_gpio = -EINVAL;
- ldp_lcd_enable_gpio = -EINVAL;
- return r;
- }
-
- ldp_backlight_gpio = gpio + 15;
- ldp_lcd_enable_gpio = gpio + 7;
+ ldp_panel_data.gpios[0] = gpio + 7;
+ ldp_panel_data.gpio_invert[0] = true;
+
+ ldp_panel_data.gpios[1] = gpio + 15;
+ ldp_panel_data.gpio_invert[1] = true;
return 0;
}
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4f1bbc3cc29b..f76d0de7b406 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -155,61 +155,43 @@ static inline void __init omap3evm_init_smsc911x(void) { return; }
#define OMAP3EVM_LCD_PANEL_LR 2
#define OMAP3EVM_LCD_PANEL_UD 3
#define OMAP3EVM_LCD_PANEL_INI 152
-#define OMAP3EVM_LCD_PANEL_ENVDD 153
#define OMAP3EVM_LCD_PANEL_QVGA 154
#define OMAP3EVM_LCD_PANEL_RESB 155
+
+#define OMAP3EVM_LCD_PANEL_ENVDD 153
#define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210
+
+/*
+ * OMAP3EVM DVI control signals
+ */
#define OMAP3EVM_DVI_PANEL_EN_GPIO 199
-static struct gpio omap3_evm_dss_gpios[] __initdata = {
- { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" },
- { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" },
- { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" },
- { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" },
- { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" },
- { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" },
+static struct panel_sharp_ls037v7dw01_data omap3_evm_lcd_data = {
+ .resb_gpio = OMAP3EVM_LCD_PANEL_RESB,
+ .ini_gpio = OMAP3EVM_LCD_PANEL_INI,
+ .mo_gpio = OMAP3EVM_LCD_PANEL_QVGA,
+ .lr_gpio = OMAP3EVM_LCD_PANEL_LR,
+ .ud_gpio = OMAP3EVM_LCD_PANEL_UD,
};
-static int lcd_enabled;
-static int dvi_enabled;
-
static void __init omap3_evm_display_init(void)
{
int r;
- r = gpio_request_array(omap3_evm_dss_gpios,
- ARRAY_SIZE(omap3_evm_dss_gpios));
+ r = gpio_request_one(OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW,
+ "lcd_panel_envdd");
if (r)
- printk(KERN_ERR "failed to get lcd_panel_* gpios\n");
-}
+ pr_err("failed to get lcd_panel_envdd GPIO\n");
-static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
- gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 0);
+ r = gpio_request_one(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO,
+ GPIOF_OUT_INIT_LOW, "lcd_panel_bklight");
+ if (r)
+ pr_err("failed to get lcd_panel_bklight GPIO\n");
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
else
gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
-
- lcd_enabled = 1;
- return 0;
-}
-
-static void omap3_evm_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(OMAP3EVM_LCD_PANEL_ENVDD, 1);
-
- if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
- gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 1);
- else
- gpio_set_value_cansleep(OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO, 0);
-
- lcd_enabled = 0;
}
static struct omap_dss_device omap3_evm_lcd_device = {
@@ -217,26 +199,14 @@ static struct omap_dss_device omap3_evm_lcd_device = {
.driver_name = "sharp_ls_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
- .platform_enable = omap3_evm_enable_lcd,
- .platform_disable = omap3_evm_disable_lcd,
+ .data = &omap3_evm_lcd_data,
};
-static int omap3_evm_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_evm_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device omap3_evm_tv_device = {
.name = "tv",
.driver_name = "venc",
.type = OMAP_DISPLAY_TYPE_VENC,
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .platform_enable = omap3_evm_enable_tv,
- .platform_disable = omap3_evm_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1004d2aaa68f..28133d5b4fed 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -44,6 +44,7 @@
#include "common.h"
#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "mux.h"
@@ -230,12 +231,16 @@ static struct twl4030_keypad_data pandora_kp_data = {
.rep = 1,
};
+static struct panel_tpo_td043_data lcd_data = {
+ .nreset_gpio = 157,
+};
+
static struct omap_dss_device pandora_lcd_device = {
.name = "lcd",
.driver_name = "tpo_td043mtea1_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
- .reset_gpio = 157,
+ .data = &lcd_data,
};
static struct omap_dss_device pandora_tv_device = {
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8afbba0923d6..d37e6b187ae4 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -94,15 +94,6 @@ static void __init omap3_stalker_display_init(void)
return;
}
-static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void omap3_stalker_disable_tv(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device omap3_stalker_tv_device = {
.name = "tv",
.driver_name = "venc",
@@ -112,8 +103,6 @@ static struct omap_dss_device omap3_stalker_tv_device = {
#elif defined(CONFIG_OMAP2_VENC_OUT_TYPE_COMPOSITE)
.u.venc.type = OMAP_DSS_VENC_TYPE_COMPOSITE,
#endif
- .platform_enable = omap3_stalker_enable_tv,
- .platform_disable = omap3_stalker_disable_tv,
};
static struct tfp410_platform_data dvi_panel = {
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index a71ad345f20d..1e2c75eee912 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -435,7 +435,7 @@ static void __init omap4_panda_init(void)
omap_sdrc_init(NULL, NULL);
omap4_twl6030_hsmmc_init(mmc);
omap4_ehci_init();
- usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
+ usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f9101407cd56..4ca6b680aa72 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -145,28 +145,9 @@ static inline void __init overo_init_smsc911x(void) { return; }
#endif
/* DSS */
-static int lcd_enabled;
-static int dvi_enabled;
-
#define OVERO_GPIO_LCD_EN 144
#define OVERO_GPIO_LCD_BL 145
-static struct gpio overo_dss_gpios[] __initdata = {
- { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" },
- { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" },
-};
-
-static void __init overo_display_init(void)
-{
- if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) {
- printk(KERN_ERR "could not obtain DSS control GPIOs\n");
- return;
- }
-
- gpio_export(OVERO_GPIO_LCD_EN, 0);
- gpio_export(OVERO_GPIO_LCD_BL, 0);
-}
-
static struct tfp410_platform_data dvi_panel = {
.i2c_bus_num = 3,
.power_down_gpio = -1,
@@ -187,30 +168,13 @@ static struct omap_dss_device overo_tv_device = {
.phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
};
-static int overo_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- if (dvi_enabled) {
- printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
- return -EINVAL;
- }
-
- gpio_set_value(OVERO_GPIO_LCD_EN, 1);
- gpio_set_value(OVERO_GPIO_LCD_BL, 1);
- lcd_enabled = 1;
- return 0;
-}
-
-static void overo_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
- gpio_set_value(OVERO_GPIO_LCD_EN, 0);
- gpio_set_value(OVERO_GPIO_LCD_BL, 0);
- lcd_enabled = 0;
-}
-
static struct panel_generic_dpi_data lcd43_panel = {
.name = "samsung_lte430wq_f0c",
- .platform_enable = overo_panel_enable_lcd,
- .platform_disable = overo_panel_disable_lcd,
+ .num_gpios = 2,
+ .gpios = {
+ OVERO_GPIO_LCD_EN,
+ OVERO_GPIO_LCD_BL
+ },
};
static struct omap_dss_device overo_lcd43_device = {
@@ -223,13 +187,20 @@ static struct omap_dss_device overo_lcd43_device = {
#if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \
defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE)
+static struct panel_generic_dpi_data lcd35_panel = {
+ .num_gpios = 2,
+ .gpios = {
+ OVERO_GPIO_LCD_EN,
+ OVERO_GPIO_LCD_BL
+ },
+};
+
static struct omap_dss_device overo_lcd35_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd35",
.driver_name = "lgphilips_lb035q02_panel",
.phy.dpi.data_lines = 24,
- .platform_enable = overo_panel_enable_lcd,
- .platform_disable = overo_panel_disable_lcd,
+ .data = &lcd35_panel,
};
#endif
@@ -508,7 +479,6 @@ static void __init overo_init(void)
usbhs_init(&usbhs_bdata);
overo_spi_init();
overo_init_smsc911x();
- overo_display_init();
overo_init_led();
overo_init_keys();
omap_twl4030_audio_init("overo", NULL);
diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c
index eb667261df08..bd74f9f6063b 100644
--- a/arch/arm/mach-omap2/board-rx51-video.c
+++ b/arch/arm/mach-omap2/board-rx51-video.c
@@ -16,6 +16,8 @@
#include <linux/mm.h>
#include <asm/mach-types.h>
#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "soc.h"
@@ -27,25 +29,16 @@
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-static int rx51_lcd_enable(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 1);
- return 0;
-}
-
-static void rx51_lcd_disable(struct omap_dss_device *dssdev)
-{
- gpio_set_value(dssdev->reset_gpio, 0);
-}
+static struct panel_acx565akm_data lcd_data = {
+ .reset_gpio = RX51_LCD_RESET_GPIO,
+};
static struct omap_dss_device rx51_lcd_device = {
.name = "lcd",
.driver_name = "panel-acx565akm",
.type = OMAP_DISPLAY_TYPE_SDI,
.phy.sdi.datapairs = 2,
- .reset_gpio = RX51_LCD_RESET_GPIO,
- .platform_enable = rx51_lcd_enable,
- .platform_disable = rx51_lcd_disable,
+ .data = &lcd_data,
};
static struct omap_dss_device rx51_tv_device = {
@@ -76,13 +69,8 @@ static int __init rx51_video_init(void)
return 0;
}
- if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH,
- "LCD ACX565AKM reset")) {
- pr_err("%s failed to get LCD Reset GPIO\n", __func__);
- return 0;
- }
-
omap_display_init(&rx51_dss_board_info);
+
return 0;
}
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index 9a7174faac51..c2a079cb76fc 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -15,8 +15,9 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
-#include "board-zoom.h"
+#include <video/omap-panel-data.h>
+#include "board-zoom.h"
#include "soc.h"
#include "common.h"
@@ -24,37 +25,17 @@
#define LCD_PANEL_RESET_GPIO_PILOT 55
#define LCD_PANEL_QVGA_GPIO 56
-static struct gpio zoom_lcd_gpios[] __initdata = {
- { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" },
- { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" },
+static struct panel_nec_nl8048_data zoom_lcd_data = {
+ /* res_gpio filled in code */
+ .qvga_gpio = LCD_PANEL_QVGA_GPIO,
};
-static void __init zoom_lcd_panel_init(void)
-{
- zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
- LCD_PANEL_RESET_GPIO_PROD :
- LCD_PANEL_RESET_GPIO_PILOT;
-
- if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios)))
- pr_err("%s: Failed to get LCD GPIOs.\n", __func__);
-}
-
-static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev)
-{
- return 0;
-}
-
-static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
-{
-}
-
static struct omap_dss_device zoom_lcd_device = {
.name = "lcd",
.driver_name = "NEC_8048_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
- .platform_enable = zoom_panel_enable_lcd,
- .platform_disable = zoom_panel_disable_lcd,
+ .data = &zoom_lcd_data,
};
static struct omap_dss_device *zoom_dss_devices[] = {
@@ -67,6 +48,13 @@ static struct omap_dss_board_info zoom_dss_data = {
.default_device = &zoom_lcd_device,
};
+static void __init zoom_lcd_panel_init(void)
+{
+ zoom_lcd_data.res_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
+ LCD_PANEL_RESET_GPIO_PROD :
+ LCD_PANEL_RESET_GPIO_PILOT;
+}
+
static struct omap2_mcspi_device_config dss_lcd_mcspi_config = {
.turbo_mode = 1,
};
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 9c49bbe825f7..393aeefaebb0 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -52,7 +52,6 @@ static struct omap_dss_device omap4_panda_dvi_device = {
.driver_name = "tfp410",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
- .reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
.channel = OMAP_DSS_CHANNEL_LCD2,
};
@@ -177,45 +176,12 @@ static struct picodlp_panel_data sdp4430_picodlp_pdata = {
.pwrgood_gpio = 45,
};
-static void sdp4430_picodlp_init(void)
-{
- int r;
- const struct gpio picodlp_gpios[] = {
- {DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
- "DLP POWER ON"},
- {sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
- "DLP EMU DONE"},
- {sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
- "DLP PWRGOOD"},
- };
-
- r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
- if (r)
- pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
-}
-
-static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DISPLAY_SEL_GPIO, 0);
- gpio_set_value(DLP_POWER_ON_GPIO, 1);
-
- return 0;
-}
-
-static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
-{
- gpio_set_value(DLP_POWER_ON_GPIO, 0);
- gpio_set_value(DISPLAY_SEL_GPIO, 1);
-}
-
static struct omap_dss_device sdp4430_picodlp_device = {
.name = "picodlp",
.driver_name = "picodlp_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.channel = OMAP_DSS_CHANNEL_LCD2,
- .platform_enable = sdp4430_panel_enable_picodlp,
- .platform_disable = sdp4430_panel_disable_picodlp,
.data = &sdp4430_picodlp_pdata,
};
@@ -232,17 +198,26 @@ static struct omap_dss_board_info sdp4430_dss_data = {
.default_device = &sdp4430_lcd_device,
};
+/*
+ * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO.
+ * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails
+ * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is
+ * selected by default
+ */
void __init omap_4430sdp_display_init(void)
{
int r;
- /* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
- sdp4430_picodlp_init();
+ r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+ "DLP POWER ON");
+ if (r)
+ pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+
omap_display_init(&sdp4430_dss_data);
/*
* OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
@@ -262,12 +237,15 @@ void __init omap_4430sdp_display_init_of(void)
{
int r;
- /* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
- sdp4430_picodlp_init();
+ r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+ "DLP POWER ON");
+ if (r)
+ pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__);
+
omap_display_init(&sdp4430_dss_data);
}
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 02e1d56a3fe5..05481490a508 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -46,7 +46,6 @@
#include <asm/smp_twd.h>
#include <asm/sched_clock.h>
-#include <asm/arch_timer.h>
#include "omap_hwmod.h"
#include "omap_device.h"
#include <plat/counter-32k.h>
@@ -627,14 +626,10 @@ void __init omap4_local_timer_init(void)
#ifdef CONFIG_SOC_OMAP5
void __init omap5_realtime_timer_init(void)
{
- int err;
-
omap4_sync32k_timer_init();
realtime_counter_init();
- err = arch_timer_of_register();
- if (err)
- pr_err("%s: arch_timer_register failed %d\n", __func__, err);
+ clocksource_of_init();
}
#endif /* CONFIG_SOC_OMAP5 */
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index c254782aa727..c016ccd92433 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -90,6 +90,5 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
.init_irq = emev2_init_irq,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
- .init_time = shmobile_timer_init,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index e4545c152722..899a86c31ec9 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -456,7 +456,6 @@ DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = irqchip_init,
.init_machine = emev2_add_standard_devices_dt,
- .init_time = shmobile_timer_init,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 228d7aba4a7c..326a4ab0bd5f 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -1030,7 +1030,6 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
.init_early = r8a7740_add_early_devices_dt,
.init_irq = r8a7740_init_irq,
.init_machine = r8a7740_add_standard_devices_dt,
- .init_time = shmobile_timer_init,
.dt_compat = r8a7740_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 59c7146bf66f..5502d624aca6 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1175,7 +1175,6 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
- .init_time = shmobile_timer_init,
.dt_compat = sh7372_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index e8cd93a5c550..fdf3894b1cc3 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -1037,7 +1037,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = irqchip_init,
.init_machine = sh73a0_add_standard_devices_dt,
- .init_time = shmobile_timer_init,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index 3d16d4dff01b..f321dbeb2379 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -19,10 +19,8 @@
*
*/
#include <linux/platform_device.h>
+#include <linux/clocksource.h>
#include <linux/delay.h>
-#include <asm/arch_timer.h>
-#include <asm/mach/time.h>
-#include <asm/smp_twd.h>
void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz,
unsigned int mult, unsigned int div)
@@ -63,6 +61,5 @@ void __init shmobile_earlytimer_init(void)
void __init shmobile_timer_init(void)
{
- arch_timer_of_register();
- arch_timer_sched_clock_init();
+ clocksource_of_init();
}
diff --git a/arch/arm/mach-spear/Makefile b/arch/arm/mach-spear/Makefile
index af9bffb94f1c..a946c19ab31a 100644
--- a/arch/arm/mach-spear/Makefile
+++ b/arch/arm/mach-spear/Makefile
@@ -7,10 +7,10 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
# Common support
obj-y := restart.o time.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+smp-$(CONFIG_SMP) += headsmp.o platsmp.o
+smp-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o
+obj-$(CONFIG_ARCH_SPEAR13XX) += spear13xx.o $(smp-y)
obj-$(CONFIG_MACH_SPEAR1310) += spear1310.o
obj-$(CONFIG_MACH_SPEAR1340) += spear1340.o
diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h
index 8ba7e75b648d..a9fd45362fee 100644
--- a/arch/arm/mach-spear/generic.h
+++ b/arch/arm/mach-spear/generic.h
@@ -22,11 +22,6 @@ extern void spear13xx_timer_init(void);
extern void spear3xx_timer_init(void);
extern struct pl022_ssp_controller pl022_plat_data;
extern struct pl08x_platform_data pl080_plat_data;
-extern struct dw_dma_platform_data dmac_plat_data;
-extern struct dw_dma_slave cf_dma_priv;
-extern struct dw_dma_slave nand_read_dma_priv;
-extern struct dw_dma_slave nand_write_dma_priv;
-bool dw_dma_filter(struct dma_chan *chan, void *slave);
void __init spear_setup_of_timer(void);
void __init spear3xx_clk_init(void __iomem *misc_base,
diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h
index 374ddc393df1..cf3a5369eeca 100644
--- a/arch/arm/mach-spear/include/mach/spear.h
+++ b/arch/arm/mach-spear/include/mach/spear.h
@@ -82,8 +82,6 @@
#define VA_L2CC_BASE IOMEM(UL(0xFB000000))
/* others */
-#define DMAC0_BASE UL(0xEA800000)
-#define DMAC1_BASE UL(0xEB000000)
#define MCIF_CF_BASE UL(0xB2800000)
/* Debug uart for linux, will be used for debug and uncompress messages */
diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c
index ed3b5c287a7b..9eaac2c881ea 100644
--- a/arch/arm/mach-spear/spear1310.c
+++ b/arch/arm/mach-spear/spear1310.c
@@ -23,40 +23,12 @@
#include <mach/spear.h>
/* Base addresses */
-#define SPEAR1310_SSP1_BASE UL(0x5D400000)
-#define SPEAR1310_SATA0_BASE UL(0xB1000000)
-#define SPEAR1310_SATA1_BASE UL(0xB1800000)
-#define SPEAR1310_SATA2_BASE UL(0xB4000000)
-
#define SPEAR1310_RAS_GRP1_BASE UL(0xD8000000)
#define VA_SPEAR1310_RAS_GRP1_BASE UL(0xFA000000)
-static struct arasan_cf_pdata cf_pdata = {
- .cf_if_clk = CF_IF_CLK_166M,
- .quirk = CF_BROKEN_UDMA,
- .dma_priv = &cf_dma_priv,
-};
-
-/* ssp device registration */
-static struct pl022_ssp_controller ssp1_plat_data = {
- .enable_dma = 0,
-};
-
-/* Add SPEAr1310 auxdata to pass platform data */
-static struct of_dev_auxdata spear1310_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_pdata),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
- OF_DEV_AUXDATA("arm,pl022", SPEAR1310_SSP1_BASE, NULL, &ssp1_plat_data),
- {}
-};
-
static void __init spear1310_dt_init(void)
{
- of_platform_populate(NULL, of_default_bus_match_table,
- spear1310_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const spear1310_dt_board_compat[] = {
diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c
index 75e38644bbfb..a04a7fe76f71 100644
--- a/arch/arm/mach-spear/spear1340.c
+++ b/arch/arm/mach-spear/spear1340.c
@@ -16,18 +16,16 @@
#include <linux/ahci_platform.h>
#include <linux/amba/serial.h>
#include <linux/delay.h>
-#include <linux/dw_dmac.h>
#include <linux/of_platform.h>
#include <linux/irqchip.h>
#include <asm/mach/arch.h>
#include "generic.h"
#include <mach/spear.h>
-#include "spear13xx-dma.h"
+/* FIXME: Move SATA PHY code into a standalone driver */
/* Base addresses */
#define SPEAR1340_SATA_BASE UL(0xB1000000)
-#define SPEAR1340_UART1_BASE UL(0xB4100000)
/* Power Management Registers */
#define SPEAR1340_PCM_CFG (VA_MISC_BASE + 0x100)
@@ -79,28 +77,6 @@
(SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
SPEAR1340_MIPHY_PLL_RATIO_TOP(25))
-static struct dw_dma_slave uart1_dma_param[] = {
- {
- /* Tx */
- .cfg_hi = DWC_CFGH_DST_PER(SPEAR1340_DMA_REQ_UART1_TX),
- .cfg_lo = 0,
- .src_master = DMA_MASTER_MEMORY,
- .dst_master = SPEAR1340_DMA_MASTER_UART1,
- }, {
- /* Rx */
- .cfg_hi = DWC_CFGH_SRC_PER(SPEAR1340_DMA_REQ_UART1_RX),
- .cfg_lo = 0,
- .src_master = SPEAR1340_DMA_MASTER_UART1,
- .dst_master = DMA_MASTER_MEMORY,
- }
-};
-
-static struct amba_pl011_data uart1_data = {
- .dma_filter = dw_dma_filter,
- .dma_tx_param = &uart1_dma_param[0],
- .dma_rx_param = &uart1_dma_param[1],
-};
-
/* SATA device registration */
static int sata_miphy_init(struct device *dev, void __iomem *addr)
{
@@ -159,14 +135,8 @@ static struct ahci_platform_data sata_pdata = {
/* Add SPEAr1340 auxdata to pass platform data */
static struct of_dev_auxdata spear1340_auxdata_lookup[] __initdata = {
- OF_DEV_AUXDATA("arasan,cf-spear1340", MCIF_CF_BASE, NULL, &cf_dma_priv),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC0_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("snps,dma-spear1340", DMAC1_BASE, NULL, &dmac_plat_data),
- OF_DEV_AUXDATA("arm,pl022", SSP_BASE, NULL, &pl022_plat_data),
-
OF_DEV_AUXDATA("snps,spear-ahci", SPEAR1340_SATA_BASE, NULL,
&sata_pdata),
- OF_DEV_AUXDATA("arm,pl011", SPEAR1340_UART1_BASE, NULL, &uart1_data),
{}
};
diff --git a/arch/arm/mach-spear/spear13xx-dma.h b/arch/arm/mach-spear/spear13xx-dma.h
deleted file mode 100644
index d50bdb605925..000000000000
--- a/arch/arm/mach-spear/spear13xx-dma.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/arm/mach-spear13xx/include/mach/dma.h
- *
- * DMA information for SPEAr13xx machine family
- *
- * Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.linux@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_DMA_H
-#define __MACH_DMA_H
-
-/* request id of all the peripherals */
-enum dma_master_info {
- /* Accessible from only one master */
- DMA_MASTER_MCIF = 0,
- DMA_MASTER_FSMC = 1,
- /* Accessible from both 0 & 1 */
- DMA_MASTER_MEMORY = 0,
- DMA_MASTER_ADC = 0,
- DMA_MASTER_UART0 = 0,
- DMA_MASTER_SSP0 = 0,
- DMA_MASTER_I2C0 = 0,
-
-#ifdef CONFIG_MACH_SPEAR1310
- /* Accessible from only one master */
- SPEAR1310_DMA_MASTER_JPEG = 1,
-
- /* Accessible from both 0 & 1 */
- SPEAR1310_DMA_MASTER_I2S = 0,
- SPEAR1310_DMA_MASTER_UART1 = 0,
- SPEAR1310_DMA_MASTER_UART2 = 0,
- SPEAR1310_DMA_MASTER_UART3 = 0,
- SPEAR1310_DMA_MASTER_UART4 = 0,
- SPEAR1310_DMA_MASTER_UART5 = 0,
- SPEAR1310_DMA_MASTER_I2C1 = 0,
- SPEAR1310_DMA_MASTER_I2C2 = 0,
- SPEAR1310_DMA_MASTER_I2C3 = 0,
- SPEAR1310_DMA_MASTER_I2C4 = 0,
- SPEAR1310_DMA_MASTER_I2C5 = 0,
- SPEAR1310_DMA_MASTER_I2C6 = 0,
- SPEAR1310_DMA_MASTER_I2C7 = 0,
- SPEAR1310_DMA_MASTER_SSP1 = 0,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
- /* Accessible from only one master */
- SPEAR1340_DMA_MASTER_I2S_PLAY = 1,
- SPEAR1340_DMA_MASTER_I2S_REC = 1,
- SPEAR1340_DMA_MASTER_I2C1 = 1,
- SPEAR1340_DMA_MASTER_UART1 = 1,
-
- /* following are accessible from both master 0 & 1 */
- SPEAR1340_DMA_MASTER_SPDIF = 0,
- SPEAR1340_DMA_MASTER_CAM = 1,
- SPEAR1340_DMA_MASTER_VIDEO_IN = 0,
- SPEAR1340_DMA_MASTER_MALI = 0,
-#endif
-};
-
-enum request_id {
- DMA_REQ_ADC = 0,
- DMA_REQ_SSP0_TX = 4,
- DMA_REQ_SSP0_RX = 5,
- DMA_REQ_UART0_TX = 6,
- DMA_REQ_UART0_RX = 7,
- DMA_REQ_I2C0_TX = 8,
- DMA_REQ_I2C0_RX = 9,
-
-#ifdef CONFIG_MACH_SPEAR1310
- SPEAR1310_DMA_REQ_FROM_JPEG = 2,
- SPEAR1310_DMA_REQ_TO_JPEG = 3,
- SPEAR1310_DMA_REQ_I2S_TX = 10,
- SPEAR1310_DMA_REQ_I2S_RX = 11,
-
- SPEAR1310_DMA_REQ_I2C1_RX = 0,
- SPEAR1310_DMA_REQ_I2C1_TX = 1,
- SPEAR1310_DMA_REQ_I2C2_RX = 2,
- SPEAR1310_DMA_REQ_I2C2_TX = 3,
- SPEAR1310_DMA_REQ_I2C3_RX = 4,
- SPEAR1310_DMA_REQ_I2C3_TX = 5,
- SPEAR1310_DMA_REQ_I2C4_RX = 6,
- SPEAR1310_DMA_REQ_I2C4_TX = 7,
- SPEAR1310_DMA_REQ_I2C5_RX = 8,
- SPEAR1310_DMA_REQ_I2C5_TX = 9,
- SPEAR1310_DMA_REQ_I2C6_RX = 10,
- SPEAR1310_DMA_REQ_I2C6_TX = 11,
- SPEAR1310_DMA_REQ_UART1_RX = 12,
- SPEAR1310_DMA_REQ_UART1_TX = 13,
- SPEAR1310_DMA_REQ_UART2_RX = 14,
- SPEAR1310_DMA_REQ_UART2_TX = 15,
- SPEAR1310_DMA_REQ_UART5_RX = 16,
- SPEAR1310_DMA_REQ_UART5_TX = 17,
- SPEAR1310_DMA_REQ_SSP1_RX = 18,
- SPEAR1310_DMA_REQ_SSP1_TX = 19,
- SPEAR1310_DMA_REQ_I2C7_RX = 20,
- SPEAR1310_DMA_REQ_I2C7_TX = 21,
- SPEAR1310_DMA_REQ_UART3_RX = 28,
- SPEAR1310_DMA_REQ_UART3_TX = 29,
- SPEAR1310_DMA_REQ_UART4_RX = 30,
- SPEAR1310_DMA_REQ_UART4_TX = 31,
-#endif
-
-#ifdef CONFIG_MACH_SPEAR1340
- SPEAR1340_DMA_REQ_SPDIF_TX = 2,
- SPEAR1340_DMA_REQ_SPDIF_RX = 3,
- SPEAR1340_DMA_REQ_I2S_TX = 10,
- SPEAR1340_DMA_REQ_I2S_RX = 11,
- SPEAR1340_DMA_REQ_UART1_TX = 12,
- SPEAR1340_DMA_REQ_UART1_RX = 13,
- SPEAR1340_DMA_REQ_I2C1_TX = 14,
- SPEAR1340_DMA_REQ_I2C1_RX = 15,
- SPEAR1340_DMA_REQ_CAM0_EVEN = 0,
- SPEAR1340_DMA_REQ_CAM0_ODD = 1,
- SPEAR1340_DMA_REQ_CAM1_EVEN = 2,
- SPEAR1340_DMA_REQ_CAM1_ODD = 3,
- SPEAR1340_DMA_REQ_CAM2_EVEN = 4,
- SPEAR1340_DMA_REQ_CAM2_ODD = 5,
- SPEAR1340_DMA_REQ_CAM3_EVEN = 6,
- SPEAR1340_DMA_REQ_CAM3_ODD = 7,
-#endif
-};
-
-#endif /* __MACH_DMA_H */
diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c
index 6dd208997176..3621599c38ad 100644
--- a/arch/arm/mach-spear/spear13xx.c
+++ b/arch/arm/mach-spear/spear13xx.c
@@ -16,70 +16,12 @@
#include <linux/amba/pl022.h>
#include <linux/clk.h>
#include <linux/clocksource.h>
-#include <linux/dw_dmac.h>
#include <linux/err.h>
#include <linux/of.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
-#include "generic.h"
#include <mach/spear.h>
-
-#include "spear13xx-dma.h"
-
-/* common dw_dma filter routine to be used by peripherals */
-bool dw_dma_filter(struct dma_chan *chan, void *slave)
-{
- struct dw_dma_slave *dws = (struct dw_dma_slave *)slave;
-
- if (chan->device->dev == dws->dma_dev) {
- chan->private = slave;
- return true;
- } else {
- return false;
- }
-}
-
-/* ssp device registration */
-static struct dw_dma_slave ssp_dma_param[] = {
- {
- /* Tx */
- .cfg_hi = DWC_CFGH_DST_PER(DMA_REQ_SSP0_TX),
- .cfg_lo = 0,
- .src_master = DMA_MASTER_MEMORY,
- .dst_master = DMA_MASTER_SSP0,
- }, {
- /* Rx */
- .cfg_hi = DWC_CFGH_SRC_PER(DMA_REQ_SSP0_RX),
- .cfg_lo = 0,
- .src_master = DMA_MASTER_SSP0,
- .dst_master = DMA_MASTER_MEMORY,
- }
-};
-
-struct pl022_ssp_controller pl022_plat_data = {
- .enable_dma = 1,
- .dma_filter = dw_dma_filter,
- .dma_rx_param = &ssp_dma_param[1],
- .dma_tx_param = &ssp_dma_param[0],
-};
-
-/* CF device registration */
-struct dw_dma_slave cf_dma_priv = {
- .cfg_hi = 0,
- .cfg_lo = 0,
- .src_master = 0,
- .dst_master = 0,
-};
-
-/* dmac device registeration */
-struct dw_dma_platform_data dmac_plat_data = {
- .nr_channels = 8,
- .chan_allocation_order = CHAN_ALLOCATION_DESCENDING,
- .chan_priority = CHAN_PRIORITY_DESCENDING,
- .block_size = 4095U,
- .nr_masters = 2,
- .data_width = { 3, 3, 0, 0 },
-};
+#include "generic.h"
void __init spear13xx_l2x0_init(void)
{
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 25160aeaa3b7..54bb80b012ac 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -749,12 +749,25 @@ void versatile_restart(char mode, const char *cmd)
/* Early initializations */
void __init versatile_init_early(void)
{
+ u32 val;
void __iomem *sys = __io_address(VERSATILE_SYS_BASE);
osc4_clk.vcoreg = sys + VERSATILE_SYS_OSCCLCD_OFFSET;
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
versatile_sched_clock_init(sys + VERSATILE_SYS_24MHz_OFFSET, 24000000);
+
+ /*
+ * set clock frequency:
+ * VERSATILE_REFCLK is 32KHz
+ * VERSATILE_TIMCLK is 1MHz
+ */
+ val = readl(__io_address(VERSATILE_SCTL_BASE));
+ writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
+ (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
+ __io_address(VERSATILE_SCTL_BASE));
}
void __init versatile_init(void)
@@ -785,19 +798,6 @@ void __init versatile_init(void)
*/
void __init versatile_timer_init(void)
{
- u32 val;
-
- /*
- * set clock frequency:
- * VERSATILE_REFCLK is 32KHz
- * VERSATILE_TIMCLK is 1MHz
- */
- val = readl(__io_address(VERSATILE_SCTL_BASE));
- writel((VERSATILE_TIMCLK << VERSATILE_TIMER1_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER2_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER3_EnSel) |
- (VERSATILE_TIMCLK << VERSATILE_TIMER4_EnSel) | val,
- __io_address(VERSATILE_SCTL_BASE));
/*
* Initialise to a known state (all timers off)
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index 2558f2e957c3..3621b000a0f6 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -45,7 +45,6 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
- .init_time = versatile_timer_init,
.init_machine = versatile_dt_init,
.dt_compat = versatile_dt_match,
.restart = versatile_restart,
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 9366f37902d9..b6083bb1eb8c 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -1,6 +1,7 @@
/*
* Versatile Express V2M Motherboard Support
*/
+#include <linux/clocksource.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/amba/mmci.h>
@@ -25,7 +26,6 @@
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
-#include <asm/arch_timer.h>
#include <asm/mach-types.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
@@ -63,9 +63,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
if (WARN_ON(!base || irq == NO_IRQ))
return;
- writel(0, base + TIMER_1_BASE + TIMER_CTRL);
- writel(0, base + TIMER_2_BASE + TIMER_CTRL);
-
sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
}
@@ -430,29 +427,11 @@ void __init v2m_dt_init_early(void)
static void __init v2m_dt_timer_init(void)
{
- struct device_node *node = NULL;
-
of_clk_init(NULL);
clocksource_of_init();
- do {
- node = of_find_compatible_node(node, NULL, "arm,sp804");
- } while (node && vexpress_get_site_by_node(node) != VEXPRESS_SITE_MB);
- if (node) {
- pr_info("Using SP804 '%s' as a clock & events source\n",
- node->full_name);
- WARN_ON(clk_register_clkdev(of_clk_get_by_name(node,
- "timclken1"), "v2m-timer0", "sp804"));
- WARN_ON(clk_register_clkdev(of_clk_get_by_name(node,
- "timclken2"), "v2m-timer1", "sp804"));
- v2m_sp804_init(of_iomap(node, 0),
- irq_of_parse_and_map(node, 0));
- }
-
- arch_timer_of_register();
- if (arch_timer_sched_clock_init() != 0)
- versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
+ versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
24000000);
}
diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c
index 31666f6b4373..adc0945255ae 100644
--- a/arch/arm/mach-virt/virt.c
+++ b/arch/arm/mach-virt/virt.c
@@ -23,21 +23,13 @@
#include <linux/of_platform.h>
#include <linux/smp.h>
-#include <asm/arch_timer.h>
#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
static void __init virt_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static void __init virt_timer_init(void)
-{
- WARN_ON(arch_timer_of_register() != 0);
- WARN_ON(arch_timer_sched_clock_init() != 0);
-}
-
static const char *virt_dt_match[] = {
"linux,dummy-virt",
NULL
@@ -47,7 +39,6 @@ extern struct smp_operations virt_smp_ops;
DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
.init_irq = irqchip_init,
- .init_time = virt_timer_init,
.init_machine = virt_init,
.smp = smp_ops(virt_smp_ops),
.dt_compat = virt_dt_match,
diff --git a/arch/arm64/include/asm/arch_timer.h b/arch/arm64/include/asm/arch_timer.h
index 91e2a6a6fcd4..bf6ab242f047 100644
--- a/arch/arm64/include/asm/arch_timer.h
+++ b/arch/arm64/include/asm/arch_timer.h
@@ -130,4 +130,9 @@ static inline u64 arch_counter_get_cntvct(void)
return cval;
}
+static inline int arch_timer_arch_init(void)
+{
+ return 0;
+}
+
#endif
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index b0ef18d14c3b..a551f88ae2c1 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -32,6 +32,7 @@
#include <linux/timer.h>
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/clocksource.h>
#include <clocksource/arm_arch_timer.h>
@@ -77,10 +78,11 @@ void __init time_init(void)
{
u32 arch_timer_rate;
- if (arch_timer_init())
- panic("Unable to initialise architected timer.\n");
+ clocksource_of_init();
arch_timer_rate = arch_timer_get_rate();
+ if (!arch_timer_rate)
+ panic("Unable to initialise architected timer.\n");
/* Cache the sched_clock multiplier to save a divide in the hot path. */
sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;