diff options
Diffstat (limited to 'arch')
40 files changed, 1 insertions, 2940 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 33b00579beff..80c7a4126c3a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -264,7 +264,6 @@ config PHYS_OFFSET ARCH_FOOTBRIDGE || \ ARCH_INTEGRATOR || \ ARCH_IOP13XX || \ - ARCH_KS8695 || \ ARCH_REALVIEW default 0x10000000 if ARCH_OMAP1 || ARCH_RPC default 0x20000000 if ARCH_S5PV210 @@ -451,17 +450,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_KS8695 - bool "Micrel/Kendin KS8695" - select CLKSRC_MMIO - select CPU_ARM922T - select GENERIC_CLOCKEVENTS - select GPIOLIB - select NEED_MACH_MEMORY_H - help - Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based - System-on-Chip devices. - config ARCH_W90X900 bool "Nuvoton W90X900 CPU" select CLKDEV_LOOKUP @@ -744,8 +732,6 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-keystone/Kconfig" -source "arch/arm/mach-ks8695/Kconfig" - source "arch/arm/mach-mediatek/Kconfig" source "arch/arm/mach-meson/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 85710e078afb..2496f1c89b88 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -509,13 +509,6 @@ choice Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. - config DEBUG_KS8695_UART - bool "KS8695 Debug UART" - depends on ARCH_KS8695 - help - Say Y here if you want kernel low-level debugging support - on KS8695. - config DEBUG_LPC18XX_UART0 bool "Kernel low-level debugging via LPC18xx/43xx UART0" depends on ARCH_LPC18XX @@ -1533,7 +1526,6 @@ config DEBUG_LL_INCLUDE DEBUG_IMX6SX_UART || \ DEBUG_IMX6UL_UART || \ DEBUG_IMX7D_UART - default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2 diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c3624ca6c0bc..c9daa4adc6fd 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone -machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig deleted file mode 100644 index bcb8bda09158..000000000000 --- a/arch/arm/configs/acs5k_defconfig +++ /dev/null @@ -1,77 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_KS8695=y -CONFIG_MACH_KS8695=y -CONFIG_MACH_DSM320=y -CONFIG_MACH_ACS5K=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCI=y -CONFIG_PCI_DEBUG=y -CONFIG_PCCARD=y -CONFIG_YENTA=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_KS8695_ETHER=y -CONFIG_PRISM54=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_KS8695=y -CONFIG_SERIAL_KS8695_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_PCA953X=y -CONFIG_WATCHDOG=y -CONFIG_KS8695_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig deleted file mode 100644 index e802cdebfd0b..000000000000 --- a/arch/arm/configs/acs5k_tiny_defconfig +++ /dev/null @@ -1,69 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_KS8695=y -CONFIG_MACH_ACS5K=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyAM0,115200 init=/bin/sh" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -# CONFIG_BLK_DEV is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_KS8695_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_KS8695=y -CONFIG_SERIAL_KS8695_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_PCA953X=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_KS8695_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_SQUASHFS=y -# CONFIG_NETWORK_FILESYSTEMS is not set -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig deleted file mode 100644 index df62d4dfbbb7..000000000000 --- a/arch/arm/configs/ks8695_defconfig +++ /dev/null @@ -1,67 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_KS8695=y -CONFIG_MACH_KS8695=y -CONFIG_MACH_DSM320=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCI=y -CONFIG_PCI_DEBUG=y -CONFIG_PCCARD=y -CONFIG_YENTA=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_PRISM54=m -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_KS8695=y -CONFIG_SERIAL_KS8695_CONSOLE=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_EXT2_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/include/debug/ks8695.S b/arch/arm/include/debug/ks8695.S deleted file mode 100644 index eb4d371b5eea..000000000000 --- a/arch/arm/include/debug/ks8695.S +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/include/debug/ks8695.S - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Debug macros - */ - -#define KS8695_UART_PA 0x03ffe000 -#define KS8695_UART_VA 0xf00fe000 -#define KS8695_URTH (0x04) -#define KS8695_URLS (0x14) -#define URLS_URTE (1 << 6) -#define URLS_URTHRE (1 << 5) - - .macro addruart, rp, rv, tmp - ldr \rp, =KS8695_UART_PA @ physical base address - ldr \rv, =KS8695_UART_VA @ virtual base address - .endm - - .macro senduart, rd, rx - str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register - .endm - - .macro busyuart, rd, rx -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register - tst \rd, #URLS_URTE @ Holding & Shift registers empty? - beq 1001b - .endm - - .macro waituart, rd, rx -1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register - tst \rd, #URLS_URTHRE @ Holding Register empty? - beq 1001b - .endm diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig deleted file mode 100644 index 724d7d039f74..000000000000 --- a/arch/arm/mach-ks8695/Kconfig +++ /dev/null @@ -1,88 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -if ARCH_KS8695 - -menu "Kendin/Micrel KS8695 Implementations" - -config MACH_KS8695 - bool "KS8695 development board" - select HAVE_PCI - help - Say 'Y' here if you want your kernel to run on the original - Kendin-Micrel KS8695 development board. - -config MACH_DSM320 - bool "DSM-320 Wireless Media Player" - help - Say 'Y' here if you want your kernel to run on the D-Link - DSM-320 Wireless Media Player. - -config MACH_ACS5K - bool "Brivo Systems LLC, ACS-5000 Master board" - help - say 'Y' here if you want your kernel to run on the Brivo - Systems LLC, ACS-5000 Master board. - -config MACH_LITE300 - bool "SecureComputing SG300" - help - Say 'Y' here if you want your kernel to support the - SecureComputing / SnapGear SG300 VPN Internet Router. - See http://www.securecomputing.com for more details. - -config MACH_SG310 - bool "McAfee SG310" - help - Say 'Y' here if you want your kernel to support the - McAfee / SnapGear SG310 VPN Internet Router. - See http://www.mcafee.com for more details. - -config MACH_SE4200 - bool "SecureComputing SE4200" - help - Say 'Y' here if you want your kernel to support the - SecureComputing / SnapGear SE4200 Secure Wireless VPN - Internet Router. - See http://www.securecomputing.com for more details. - -config MACH_CM4002 - bool "OpenGear CM4002" - help - Say 'Y' here if you want your kernel to support the OpenGear - CM4002 Secure Access Server. See http://www.opengear.com for - more details. - -config MACH_CM4008 - bool "OpenGear CM4008" - select HAVE_PCI - help - Say 'Y' here if you want your kernel to support the OpenGear - CM4008 Console Server. See http://www.opengear.com for more - details. - -config MACH_CM41xx - bool "OpenGear CM41xx" - select HAVE_PCI - help - Say 'Y' here if you want your kernel to support the OpenGear - CM4016 or CM4048 Console Servers. See http://www.opengear.com for - more details. - -config MACH_IM4004 - bool "OpenGear IM4004" - select HAVE_PCI - help - Say 'Y' here if you want your kernel to support the OpenGear - IM4004 Secure Access Server. See http://www.opengear.com for - more details. - -config MACH_IM42xx - bool "OpenGear IM42xx" - select HAVE_PCI - help - Say 'Y' here if you want your kernel to support the OpenGear - IM4216 or IM4248 Console Servers. See http://www.opengear.com for - more details. - -endmenu - -endif diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile deleted file mode 100644 index 439b22255a32..000000000000 --- a/arch/arm/mach-ks8695/Makefile +++ /dev/null @@ -1,23 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# arch/arm/mach-ks8695/Makefile -# -# Makefile for KS8695 architecture support -# - -obj-y := cpu.o irq.o time.o devices.o - -# PCI support is optional -obj-$(CONFIG_PCI) += pci.o - -# Board-specific support -obj-$(CONFIG_MACH_KS8695) += board-micrel.o -obj-$(CONFIG_MACH_DSM320) += board-dsm320.o -obj-$(CONFIG_MACH_ACS5K) += board-acs5k.o -obj-$(CONFIG_MACH_LITE300) += board-sg.o -obj-$(CONFIG_MACH_SG310) += board-sg.o -obj-$(CONFIG_MACH_SE4200) += board-sg.o -obj-$(CONFIG_MACH_CM4002) += board-og.o -obj-$(CONFIG_MACH_CM4008) += board-og.o -obj-$(CONFIG_MACH_CM41xx) += board-og.o -obj-$(CONFIG_MACH_IM4004) += board-og.o -obj-$(CONFIG_MACH_IM42xx) += board-og.o diff --git a/arch/arm/mach-ks8695/Makefile.boot b/arch/arm/mach-ks8695/Makefile.boot deleted file mode 100644 index cf32eb605bd8..000000000000 --- a/arch/arm/mach-ks8695/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(TEXTADDR) -# PARAMS_PHYS must be within 4MB of ZRELADDR -# INITRD_PHYS must be in RAM - - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c deleted file mode 100644 index f319258d1226..000000000000 --- a/arch/arm/mach-ks8695/board-acs5k.c +++ /dev/null @@ -1,238 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ks8695/board-acs5k.c - * - * Brivo Systems LLC, ACS-5000 Master Board - * - * Copyright 2008 Simtec Electronics - * Daniel Silverstone <dsilvers@simtec.co.uk> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/gpio/machine.h> -#include <linux/i2c.h> -#include <linux/i2c-algo-bit.h> -#include <linux/platform_data/i2c-gpio.h> -#include <linux/platform_data/pca953x.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "devices.h" -#include <mach/gpio-ks8695.h> - -#include "generic.h" - -static struct gpiod_lookup_table acs5k_i2c_gpiod_table = { - .dev_id = "i2c-gpio", - .table = { - GPIO_LOOKUP_IDX("KS8695", 4, NULL, 0, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("KS8695", 5, NULL, 1, - GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct i2c_gpio_platform_data acs5k_i2c_device_platdata = { - .udelay = 10, -}; - -static struct platform_device acs5k_i2c_device = { - .name = "i2c-gpio", - .id = -1, - .num_resources = 0, - .resource = NULL, - .dev = { - .platform_data = &acs5k_i2c_device_platdata, - }, -}; - -static int acs5k_pca9555_setup(struct i2c_client *client, - unsigned gpio_base, unsigned ngpio, - void *context) -{ - static int acs5k_gpio_value[] = { - -1, -1, -1, -1, -1, -1, -1, 0, 1, 1, -1, 0, 1, 0, -1, -1 - }; - int n; - - for (n = 0; n < ARRAY_SIZE(acs5k_gpio_value); ++n) { - gpio_request(gpio_base + n, "ACS-5000 GPIO Expander"); - if (acs5k_gpio_value[n] < 0) - gpio_direction_input(gpio_base + n); - else - gpio_direction_output(gpio_base + n, - acs5k_gpio_value[n]); - gpio_export(gpio_base + n, 0); /* Export, direction locked down */ - } - - return 0; -} - -static struct pca953x_platform_data acs5k_i2c_pca9555_platdata = { - .gpio_base = 16, /* Start directly after the CPU's GPIO */ - .invert = 0, /* Do not invert */ - .setup = acs5k_pca9555_setup, -}; - -static struct i2c_board_info acs5k_i2c_devs[] __initdata = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, - { - I2C_BOARD_INFO("pca9555", 0x20), - .platform_data = &acs5k_i2c_pca9555_platdata, - }, -}; - -static void __init acs5k_i2c_init(void) -{ - /* The gpio interface */ - gpiod_add_lookup_table(&acs5k_i2c_gpiod_table); - platform_device_register(&acs5k_i2c_device); - /* I2C devices */ - i2c_register_board_info(0, acs5k_i2c_devs, - ARRAY_SIZE(acs5k_i2c_devs)); -} - -static struct mtd_partition acs5k_nor_partitions[] = { - [0] = { - .name = "Boot Agent and config", - .size = SZ_256K, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, - [1] = { - .name = "Kernel", - .size = SZ_1M, - .offset = SZ_256K, - }, - [2] = { - .name = "SquashFS1", - .size = SZ_2M, - .offset = SZ_256K + SZ_1M, - }, - [3] = { - .name = "SquashFS2", - .size = SZ_4M + SZ_2M, - .offset = SZ_256K + SZ_1M + SZ_2M, - }, - [4] = { - .name = "Data", - .size = SZ_16M + SZ_4M + SZ_2M + SZ_512K, /* 22.5 MB */ - .offset = SZ_256K + SZ_8M + SZ_1M, - } -}; - -static struct physmap_flash_data acs5k_nor_pdata = { - .width = 4, - .nr_parts = ARRAY_SIZE(acs5k_nor_partitions), - .parts = acs5k_nor_partitions, -}; - -static struct resource acs5k_nor_resource[] = { - [0] = { - .start = SZ_32M, /* We expect the bootloader to map - * the flash here. - */ - .end = SZ_32M + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = SZ_32M + SZ_16M, - .end = SZ_32M + SZ_32M - SZ_256K - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device acs5k_device_nor = { - .name = "physmap-flash", - .id = -1, - .num_resources = ARRAY_SIZE(acs5k_nor_resource), - .resource = acs5k_nor_resource, - .dev = { - .platform_data = &acs5k_nor_pdata, - }, -}; - -static void __init acs5k_register_nor(void) -{ - int ret; - - if (acs5k_nor_partitions[0].mask_flags == 0) - printk(KERN_WARNING "Warning: Unprotecting bootloader and configuration partition\n"); - - ret = platform_device_register(&acs5k_device_nor); - if (ret < 0) - printk(KERN_ERR "failed to register physmap-flash device\n"); -} - -static int __init acs5k_protection_setup(char *s) -{ - /* We can't allocate anything here but we should be able - * to trivially parse s and decide if we can protect the - * bootloader partition or not - */ - if (strcmp(s, "no") == 0) - acs5k_nor_partitions[0].mask_flags = 0; - - return 1; -} - -__setup("protect_bootloader=", acs5k_protection_setup); - -static void __init acs5k_init_gpio(void) -{ - int i; - - ks8695_register_gpios(); - for (i = 0; i < 4; ++i) - gpio_request(i, "ACS5K IRQ"); - gpio_request(7, "ACS5K KS_FRDY"); - for (i = 8; i < 16; ++i) - gpio_request(i, "ACS5K Unused"); - - gpio_request(3, "ACS5K CAN Control"); - gpio_request(6, "ACS5K Heartbeat"); - gpio_direction_output(3, 1); /* Default CAN_RESET high */ - gpio_direction_output(6, 0); /* Default KS8695_ACTIVE low */ - gpio_export(3, 0); /* export CAN_RESET as output only */ - gpio_export(6, 0); /* export KS8695_ACTIVE as output only */ -} - -static void __init acs5k_init(void) -{ - acs5k_init_gpio(); - - /* Network device */ - ks8695_add_device_lan(); /* eth0 = LAN */ - ks8695_add_device_wan(); /* ethX = WAN */ - - /* NOR devices */ - acs5k_register_nor(); - - /* I2C bus */ - acs5k_i2c_init(); -} - -MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board") - /* Maintainer: Simtec Electronics. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = acs5k_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c deleted file mode 100644 index d5f435cae6e0..000000000000 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ /dev/null @@ -1,127 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ks8695/board-dsm320.c - * - * DSM-320 D-Link Wireless Media Player, board support. - * - * Copyright 2008 Simtec Electronics - * Daniel Silverstone <dsilvers@simtec.co.uk> - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include "devices.h" -#include <mach/gpio-ks8695.h> - -#include "generic.h" - -#ifdef CONFIG_PCI -static int dsm320_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { - case 0: - /* PCI-AHB bridge? */ - return KS8695_IRQ_EXTERN0; - case 18: - /* Mini PCI slot */ - return KS8695_IRQ_EXTERN2; - case 20: - /* RealMAGIC chip */ - return KS8695_IRQ_EXTERN0; - } - BUG(); -} - -static struct ks8695_pci_cfg __initdata dsm320_pci = { - .mode = KS8695_MODE_MINIPCI, - .map_irq = dsm320_pci_map_irq, -}; - -static void __init dsm320_register_pci(void) -{ - /* Initialise the GPIO lines for interrupt mode */ - /* RealMAGIC */ - ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW); - /* MiniPCI Slot */ - ks8695_gpio_interrupt(KS8695_GPIO_2, IRQ_TYPE_LEVEL_LOW); - - ks8695_init_pci(&dsm320_pci); -} - -#else -static inline void __init dsm320_register_pci(void) { } -#endif - -static struct physmap_flash_data dsm320_nor_pdata = { - .width = 4, - .nr_parts = 0, -}; - -static struct resource dsm320_nor_resource[] = { - [0] = { - .start = SZ_32M, /* We expect the bootloader to map - * the flash here. - */ - .end = SZ_32M + SZ_4M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device dsm320_device_nor = { - .name = "physmap-flash", - .id = -1, - .num_resources = ARRAY_SIZE(dsm320_nor_resource), - .resource = dsm320_nor_resource, - .dev = { - .platform_data = &dsm320_nor_pdata, - }, -}; - -void __init dsm320_register_nor(void) -{ - int ret; - - ret = platform_device_register(&dsm320_device_nor); - if (ret < 0) - printk(KERN_ERR "failed to register physmap-flash device\n"); -} - -static void __init dsm320_init(void) -{ - /* GPIO registration */ - ks8695_register_gpios(); - - /* PCI registration */ - dsm320_register_pci(); - - /* Network device */ - ks8695_add_device_lan(); /* eth0 = LAN */ - - /* NOR devices */ - dsm320_register_nor(); -} - -MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player") - /* Maintainer: Simtec Electronics. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = dsm320_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c deleted file mode 100644 index bf8856ce3fbb..000000000000 --- a/arch/arm/mach-ks8695/board-micrel.c +++ /dev/null @@ -1,59 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ks8695/board-micrel.c - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/platform_device.h> - -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/gpio-ks8695.h> -#include "devices.h" - -#include "generic.h" - -#ifdef CONFIG_PCI -static int micrel_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return KS8695_IRQ_EXTERN0; -} - -static struct ks8695_pci_cfg __initdata micrel_pci = { - .mode = KS8695_MODE_MINIPCI, - .map_irq = micrel_pci_map_irq, -}; -#endif - - -static void __init micrel_init(void) -{ - printk(KERN_INFO "Micrel KS8695 Development Board initializing\n"); - - ks8695_register_gpios(); - -#ifdef CONFIG_PCI - ks8695_init_pci(&micrel_pci); -#endif - - /* Add devices */ - ks8695_add_device_wan(); /* eth0 = WAN */ - ks8695_add_device_lan(); /* eth1 = LAN */ -} - -MACHINE_START(KS8695, "KS8695 Centaur Development Board") - /* Maintainer: Micrel Semiconductor Inc. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = micrel_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c deleted file mode 100644 index 12ffe9227f9c..000000000000 --- a/arch/arm/mach-ks8695/board-og.c +++ /dev/null @@ -1,197 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * board-og.c -- support for the OpenGear KS8695 based boards. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include "devices.h" -#include <mach/regs-gpio.h> -#include <mach/gpio-ks8695.h> -#include "generic.h" - -static int og_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if (machine_is_im4004() && (slot == 8)) - return KS8695_IRQ_EXTERN1; - return KS8695_IRQ_EXTERN0; -} - -static struct ks8695_pci_cfg __initdata og_pci = { - .mode = KS8695_MODE_PCI, - .map_irq = og_pci_map_irq, -}; - -static void __init og_register_pci(void) -{ - /* Initialize the GPIO lines for interrupt mode */ - ks8695_gpio_interrupt(KS8695_GPIO_0, IRQ_TYPE_LEVEL_LOW); - - /* Cardbus Slot */ - if (machine_is_im4004()) - ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_LOW); - - if (IS_ENABLED(CONFIG_PCI)) - ks8695_init_pci(&og_pci); -} - -/* - * The PCI bus reset is driven by a dedicated GPIO line. Toggle it here - * and bring the PCI bus out of reset. - */ -static void __init og_pci_bus_reset(void) -{ - unsigned int rstline = 1; - - /* Some boards use a different GPIO as the PCI reset line */ - if (machine_is_im4004()) - rstline = 2; - else if (machine_is_im42xx()) - rstline = 0; - - gpio_request(rstline, "PCI reset"); - gpio_direction_output(rstline, 0); - - /* Drive a reset on the PCI reset line */ - gpio_set_value(rstline, 1); - gpio_set_value(rstline, 0); - mdelay(100); - gpio_set_value(rstline, 1); - mdelay(100); -} - -/* - * Direct connect serial ports (non-PCI that is). - */ -#define S8250_PHYS 0x03800000 -#define S8250_VIRT 0xf4000000 -#define S8250_SIZE 0x00100000 - -static struct map_desc og_io_desc[] __initdata = { - { - .virtual = S8250_VIRT, - .pfn = __phys_to_pfn(S8250_PHYS), - .length = S8250_SIZE, - .type = MT_DEVICE, - } -}; - -static struct resource og_uart_resources[] = { - { - .start = S8250_VIRT, - .end = S8250_VIRT + S8250_SIZE, - .flags = IORESOURCE_MEM - }, -}; - -static struct plat_serial8250_port og_uart_data[] = { - { - .mapbase = S8250_VIRT, - .membase = (char *) S8250_VIRT, - .irq = 3, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = 115200 * 16, - }, - { }, -}; - -static struct platform_device og_uart = { - .name = "serial8250", - .id = 0, - .dev.platform_data = og_uart_data, - .num_resources = 1, - .resource = og_uart_resources -}; - -static struct platform_device *og_devices[] __initdata = { - &og_uart -}; - -static void __init og_init(void) -{ - ks8695_register_gpios(); - - if (machine_is_cm4002()) { - ks8695_gpio_interrupt(KS8695_GPIO_1, IRQ_TYPE_LEVEL_HIGH); - iotable_init(og_io_desc, ARRAY_SIZE(og_io_desc)); - platform_add_devices(og_devices, ARRAY_SIZE(og_devices)); - } else { - og_pci_bus_reset(); - og_register_pci(); - } - - ks8695_add_device_lan(); - ks8695_add_device_wan(); -} - -#ifdef CONFIG_MACH_CM4002 -MACHINE_START(CM4002, "OpenGear/CM4002") - /* OpenGear Inc. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = og_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_CM4008 -MACHINE_START(CM4008, "OpenGear/CM4008") - /* OpenGear Inc. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = og_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_CM41xx -MACHINE_START(CM41XX, "OpenGear/CM41xx") - /* OpenGear Inc. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = og_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_IM4004 -MACHINE_START(IM4004, "OpenGear/IM4004") - /* OpenGear Inc. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = og_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_IM42xx -MACHINE_START(IM42XX, "OpenGear/IM42xx") - /* OpenGear Inc. */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = og_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c deleted file mode 100644 index d5ec85a56375..000000000000 --- a/arch/arm/mach-ks8695/board-sg.c +++ /dev/null @@ -1,118 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * board-sg.c -- support for the SnapGear KS8695 based boards - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/partitions.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include "devices.h" -#include "generic.h" - -/* - * The SG310 machine type is fitted with a conventional 8MB Strataflash - * device. Define its partitioning. - */ -#define FL_BASE 0x02000000 -#define FL_SIZE SZ_8M - -static struct mtd_partition sg_mtd_partitions[] = { - [0] = { - .name = "SnapGear Boot Loader", - .size = SZ_128K, - }, - [1] = { - .name = "SnapGear non-volatile configuration", - .size = SZ_512K, - .offset = SZ_256K, - }, - [2] = { - .name = "SnapGear image", - .offset = SZ_512K + SZ_256K, - }, - [3] = { - .name = "SnapGear StrataFlash", - }, - [4] = { - .name = "SnapGear Boot Tags", - .size = SZ_128K, - .offset = SZ_128K, - }, -}; - -static struct physmap_flash_data sg_mtd_pdata = { - .width = 1, - .nr_parts = ARRAY_SIZE(sg_mtd_partitions), - .parts = sg_mtd_partitions, -}; - - -static struct resource sg_mtd_resource[] = { - [0] = { - .start = FL_BASE, - .end = FL_BASE + FL_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device sg_mtd_device = { - .name = "physmap-flash", - .id = 0, - .num_resources = ARRAY_SIZE(sg_mtd_resource), - .resource = sg_mtd_resource, - .dev = { - .platform_data = &sg_mtd_pdata, - }, -}; - -static void __init sg_init(void) -{ - ks8695_add_device_lan(); - ks8695_add_device_wan(); - - if (machine_is_sg310()) - platform_device_register(&sg_mtd_device); -} - -#ifdef CONFIG_MACH_LITE300 -MACHINE_START(LITE300, "SecureComputing/SG300") - /* SnapGear */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = sg_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_SG310 -MACHINE_START(SG310, "McAfee/SG310") - /* SnapGear */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = sg_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_SE4200 -MACHINE_START(SE4200, "SecureComputing/SE4200") - /* SnapGear */ - .atag_offset = 0x100, - .map_io = ks8695_map_io, - .init_irq = ks8695_init_irq, - .init_machine = sg_init, - .init_time = ks8695_timer_init, - .restart = ks8695_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c deleted file mode 100644 index aa6bb0c93aa8..000000000000 --- a/arch/arm/mach-ks8695/cpu.c +++ /dev/null @@ -1,60 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ks8695/cpu.c - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 CPU support - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include "regs-sys.h" -#include <mach/regs-misc.h> - - -static struct map_desc ks8695_io_desc[] __initdata = { - { - .virtual = (unsigned long)KS8695_IO_VA, - .pfn = __phys_to_pfn(KS8695_IO_PA), - .length = KS8695_IO_SIZE, - .type = MT_DEVICE, - } -}; - -static void __init ks8695_processor_info(void) -{ - unsigned long id, rev; - - id = __raw_readl(KS8695_MISC_VA + KS8695_DID); - rev = __raw_readl(KS8695_MISC_VA + KS8695_RID); - - printk("KS8695 ID=%04lx SubID=%02lx Revision=%02lx\n", (id & DID_ID), (rev & RID_SUBID), (rev & RID_REVISION)); -} - -static unsigned int sysclk[8] = { 125000000, 100000000, 62500000, 50000000, 41700000, 33300000, 31300000, 25000000 }; -static unsigned int cpuclk[8] = { 166000000, 166000000, 83000000, 83000000, 55300000, 55300000, 41500000, 41500000 }; - -static void __init ks8695_clock_info(void) -{ - unsigned int scdc = __raw_readl(KS8695_SYS_VA + KS8695_CLKCON) & CLKCON_SCDC; - - printk("Clocks: System %u MHz, CPU %u MHz\n", - sysclk[scdc] / 1000000, cpuclk[scdc] / 1000000); -} - -void __init ks8695_map_io(void) -{ - iotable_init(ks8695_io_desc, ARRAY_SIZE(ks8695_io_desc)); - - ks8695_processor_info(); - ks8695_clock_info(); -} diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c deleted file mode 100644 index 61cf20beb45f..000000000000 --- a/arch/arm/mach-ks8695/devices.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * arch/arm/mach-ks8695/devices.c - * - * Copyright (C) 2006 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <mach/irqs.h> -#include "regs-wan.h" -#include "regs-lan.h" -#include "regs-hpna.h" -#include <mach/regs-switch.h> -#include <mach/regs-misc.h> - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -static u64 eth_dmamask = 0xffffffffUL; - -static struct resource ks8695_wan_resources[] = { - [0] = { - .start = KS8695_WAN_PA, - .end = KS8695_WAN_PA + 0x00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "WAN RX", - .start = KS8695_IRQ_WAN_RX_STATUS, - .end = KS8695_IRQ_WAN_RX_STATUS, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "WAN TX", - .start = KS8695_IRQ_WAN_TX_STATUS, - .end = KS8695_IRQ_WAN_TX_STATUS, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .name = "WAN Link", - .start = KS8695_IRQ_WAN_LINK, - .end = KS8695_IRQ_WAN_LINK, - .flags = IORESOURCE_IRQ, - }, - [4] = { - .name = "WAN PHY", - .start = KS8695_MISC_PA, - .end = KS8695_MISC_PA + 0x1f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ks8695_wan_device = { - .name = "ks8695_ether", - .id = 0, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = ks8695_wan_resources, - .num_resources = ARRAY_SIZE(ks8695_wan_resources), -}; - - -static struct resource ks8695_lan_resources[] = { - [0] = { - .start = KS8695_LAN_PA, - .end = KS8695_LAN_PA + 0x00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "LAN RX", - .start = KS8695_IRQ_LAN_RX_STATUS, - .end = KS8695_IRQ_LAN_RX_STATUS, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "LAN TX", - .start = KS8695_IRQ_LAN_TX_STATUS, - .end = KS8695_IRQ_LAN_TX_STATUS, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .name = "LAN SWITCH", - .start = KS8695_SWITCH_PA, - .end = KS8695_SWITCH_PA + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ks8695_lan_device = { - .name = "ks8695_ether", - .id = 1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = ks8695_lan_resources, - .num_resources = ARRAY_SIZE(ks8695_lan_resources), -}; - - -static struct resource ks8695_hpna_resources[] = { - [0] = { - .start = KS8695_HPNA_PA, - .end = KS8695_HPNA_PA + 0x00ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .name = "HPNA RX", - .start = KS8695_IRQ_HPNA_RX_STATUS, - .end = KS8695_IRQ_HPNA_RX_STATUS, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .name = "HPNA TX", - .start = KS8695_IRQ_HPNA_TX_STATUS, - .end = KS8695_IRQ_HPNA_TX_STATUS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ks8695_hpna_device = { - .name = "ks8695_ether", - .id = 2, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = 0xffffffff, - }, - .resource = ks8695_hpna_resources, - .num_resources = ARRAY_SIZE(ks8695_hpna_resources), -}; - -void __init ks8695_add_device_wan(void) -{ - platform_device_register(&ks8695_wan_device); -} - -void __init ks8695_add_device_lan(void) -{ - platform_device_register(&ks8695_lan_device); -} - -void __init ks8696_add_device_hpna(void) -{ - platform_device_register(&ks8695_hpna_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -static struct platform_device ks8695_wdt_device = { - .name = "ks8695_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init ks8695_add_device_watchdog(void) -{ - platform_device_register(&ks8695_wdt_device); -} - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init ks8695_add_standard_devices(void) -{ - ks8695_add_device_watchdog(); - return 0; -} - -arch_initcall(ks8695_add_standard_devices); diff --git a/arch/arm/mach-ks8695/devices.h b/arch/arm/mach-ks8695/devices.h deleted file mode 100644 index cc23ee3820ea..000000000000 --- a/arch/arm/mach-ks8695/devices.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ks8695/include/mach/devices.h - * - * Copyright (C) 2006 Andrew Victor - */ - -#ifndef __ASM_ARCH_DEVICES_H -#define __ASM_ARCH_DEVICES_H - -#include <linux/pci.h> - - /* Ethernet */ -extern void __init ks8695_add_device_wan(void); -extern void __init ks8695_add_device_lan(void); -extern void __init ks8695_add_device_hpna(void); - - /* PCI */ -#define KS8695_MODE_PCI 0 -#define KS8695_MODE_MINIPCI 1 -#define KS8695_MODE_CARDBUS 2 - -struct ks8695_pci_cfg { - short mode; - int (*map_irq)(const struct pci_dev *, u8, u8); -}; -extern __init void ks8695_init_pci(struct ks8695_pci_cfg *); - -#endif diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h deleted file mode 100644 index 9e9cbdd436a9..000000000000 --- a/arch/arm/mach-ks8695/generic.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * arch/arm/mach-ks8695/generic.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics -*/ - -extern __init void ks8695_map_io(void); -extern __init void ks8695_init_irq(void); -extern void ks8695_restart(enum reboot_mode, const char *); -extern void ks8695_timer_init(void); diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S deleted file mode 100644 index 7ff812cb010b..000000000000 --- a/arch/arm/mach-ks8695/include/mach/entry-macro.S +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/entry-macro.S - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * Low-level IRQ helper macros for KS8695 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. -*/ - -#include <mach/hardware.h> -#include <mach/regs-irq.h> - - .macro get_irqnr_preamble, base, tmp - ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register - - teq \irqstat, #0 - beq 1001f - - mov \irqnr, #0 - - tst \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tsteq \irqstat, #0xff - moveq \irqstat, \irqstat, lsr #8 - addeq \irqnr, \irqnr, #8 - tst \irqstat, #0x0f - moveq \irqstat, \irqstat, lsr #4 - addeq \irqnr, \irqnr, #4 - tst \irqstat, #0x03 - moveq \irqstat, \irqstat, lsr #2 - addeq \irqnr, \irqnr, #2 - tst \irqstat, #0x01 - addseq \irqnr, \irqnr, #1 -1001: - .endm diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h deleted file mode 100644 index 600115f48fb3..000000000000 --- a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006 Andrew Victor - */ - -#ifndef __MACH_KS8659_GPIO_H -#define __MACH_KS8659_GPIO_H - -#include <linux/kernel.h> - -#define KS8695_GPIO_0 0 -#define KS8695_GPIO_1 1 -#define KS8695_GPIO_2 2 -#define KS8695_GPIO_3 3 -#define KS8695_GPIO_4 4 -#define KS8695_GPIO_5 5 -#define KS8695_GPIO_6 6 -#define KS8695_GPIO_7 7 -#define KS8695_GPIO_8 8 -#define KS8695_GPIO_9 9 -#define KS8695_GPIO_10 10 -#define KS8695_GPIO_11 11 -#define KS8695_GPIO_12 12 -#define KS8695_GPIO_13 13 -#define KS8695_GPIO_14 14 -#define KS8695_GPIO_15 15 - -/* - * Configure GPIO pin as external interrupt source. - */ -extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type); - -/* Register the GPIOs */ -extern void ks8695_register_gpios(void); - -#endif /* __MACH_KS8659_GPIO_H */ diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h deleted file mode 100644 index 0fb889be8112..000000000000 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ /dev/null @@ -1,42 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ks8695/include/mach/hardware.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Memory Map definitions -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <linux/sizes.h> - -/* - * Clocks are derived from MCLK, which is 25MHz - */ -#define KS8695_CLOCK_RATE 25000000 - -/* - * Physical RAM address. - */ -#define KS8695_SDRAM_PA 0x00000000 - - -/* - * We map an entire MiB with the System Configuration Registers in even - * though only 64KiB is needed. This makes it easier for use with the - * head debug code as the initial MMU setup only deals in L1 sections. - */ -#define KS8695_IO_PA 0x03F00000 -#define KS8695_IO_VA IOMEM(0xF0000000) -#define KS8695_IO_SIZE SZ_1M - -#define KS8695_PCIMEM_PA 0x60000000 -#define KS8695_PCIMEM_SIZE SZ_512M - -#define KS8695_PCIIO_PA 0x80000000 -#define KS8695_PCIIO_SIZE SZ_64K - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h deleted file mode 100644 index 0cbb30672427..000000000000 --- a/arch/arm/mach-ks8695/include/mach/irqs.h +++ /dev/null @@ -1,51 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ks8695/include/mach/irqs.h - * - * Copyright (C) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - - -#define NR_IRQS 32 - -/* - * IRQ definitions - */ -#define KS8695_IRQ_COMM_RX 0 -#define KS8695_IRQ_COMM_TX 1 -#define KS8695_IRQ_EXTERN0 2 -#define KS8695_IRQ_EXTERN1 3 -#define KS8695_IRQ_EXTERN2 4 -#define KS8695_IRQ_EXTERN3 5 -#define KS8695_IRQ_TIMER0 6 -#define KS8695_IRQ_TIMER1 7 -#define KS8695_IRQ_UART_TX 8 -#define KS8695_IRQ_UART_RX 9 -#define KS8695_IRQ_UART_LINE_STATUS 10 -#define KS8695_IRQ_UART_MODEM_STATUS 11 -#define KS8695_IRQ_LAN_RX_STOP 12 -#define KS8695_IRQ_LAN_TX_STOP 13 -#define KS8695_IRQ_LAN_RX_BUF 14 -#define KS8695_IRQ_LAN_TX_BUF 15 -#define KS8695_IRQ_LAN_RX_STATUS 16 -#define KS8695_IRQ_LAN_TX_STATUS 17 -#define KS8695_IRQ_HPNA_RX_STOP 18 -#define KS8695_IRQ_HPNA_TX_STOP 19 -#define KS8695_IRQ_HPNA_RX_BUF 20 -#define KS8695_IRQ_HPNA_TX_BUF 21 -#define KS8695_IRQ_HPNA_RX_STATUS 22 -#define KS8695_IRQ_HPNA_TX_STATUS 23 -#define KS8695_IRQ_BUS_ERROR 24 -#define KS8695_IRQ_WAN_RX_STOP 25 -#define KS8695_IRQ_WAN_TX_STOP 26 -#define KS8695_IRQ_WAN_RX_BUF 27 -#define KS8695_IRQ_WAN_TX_BUF 28 -#define KS8695_IRQ_WAN_RX_STATUS 29 -#define KS8695_IRQ_WAN_TX_STATUS 30 -#define KS8695_IRQ_WAN_LINK 31 - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h deleted file mode 100644 index ab0d27fa8969..000000000000 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/memory.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 Memory definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <mach/hardware.h> - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_PCI - -/* PCI mappings */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + KS8695_PCIMEM_PA) -#define __bus_to_virt(x) ((x) - KS8695_PCIMEM_PA + PAGE_OFFSET) - -/* Platform-bus mapping */ -extern struct bus_type platform_bus_type; -#define is_lbus_device(dev) (dev && dev->bus == &platform_bus_type) -#define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \ - __phys_to_virt(x) : __bus_to_virt(x)); }) -#define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \ - (dma_addr_t)__virt_to_phys((unsigned long)x) \ - : (dma_addr_t)__virt_to_bus(x); }) -#define __arch_pfn_to_dma(dev, pfn) \ - ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ - if (!is_lbus_device(dev)) \ - __dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \ - __dma; }) - -#define __arch_dma_to_pfn(dev, x) \ - ({ dma_addr_t __dma = x; \ - if (!is_lbus_device(dev)) \ - __dma += PHYS_OFFSET - KS8695_PCIMEM_PA; \ - __phys_to_pfn(__dma); \ - }) - -#endif - -#endif - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h deleted file mode 100644 index 90614a7d0548..000000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-gpio.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-gpio.h - * - * Copyright (C) 2007 Andrew Victor - * - * KS8695 - GPIO control registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_GPIO_H -#define KS8695_GPIO_H - -#define KS8695_GPIO_OFFSET (0xF0000 + 0xE600) -#define KS8695_GPIO_VA (KS8695_IO_VA + KS8695_GPIO_OFFSET) -#define KS8695_GPIO_PA (KS8695_IO_PA + KS8695_GPIO_OFFSET) - - -#define KS8695_IOPM (0x00) /* I/O Port Mode Register */ -#define KS8695_IOPC (0x04) /* I/O Port Control Register */ -#define KS8695_IOPD (0x08) /* I/O Port Data Register */ - - -/* Port Mode Register */ -#define IOPM(x) (1 << (x)) /* Mode for GPIO Pin x */ - -/* Port Control Register */ -#define IOPC_IOTIM1EN (1 << 17) /* GPIO Pin for Timer1 Enable */ -#define IOPC_IOTIM0EN (1 << 16) /* GPIO Pin for Timer0 Enable */ -#define IOPC_IOEINT3EN (1 << 15) /* GPIO Pin for External/Soft Interrupt 3 Enable */ -#define IOPC_IOEINT3TM (7 << 12) /* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */ -#define IOPC_IOEINT3_MODE(x) ((x) << 12) -#define IOPC_IOEINT2EN (1 << 11) /* GPIO Pin for External/Soft Interrupt 2 Enable */ -#define IOPC_IOEINT2TM (7 << 8) /* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */ -#define IOPC_IOEINT2_MODE(x) ((x) << 8) -#define IOPC_IOEINT1EN (1 << 7) /* GPIO Pin for External/Soft Interrupt 1 Enable */ -#define IOPC_IOEINT1TM (7 << 4) /* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */ -#define IOPC_IOEINT1_MODE(x) ((x) << 4) -#define IOPC_IOEINT0EN (1 << 3) /* GPIO Pin for External/Soft Interrupt 0 Enable */ -#define IOPC_IOEINT0TM (7 << 0) /* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */ -#define IOPC_IOEINT0_MODE(x) ((x) << 0) - - /* Trigger Modes */ -#define IOPC_TM_LOW (0) /* Level Detection (Active Low) */ -#define IOPC_TM_HIGH (1) /* Level Detection (Active High) */ -#define IOPC_TM_RISING (2) /* Rising Edge Detection */ -#define IOPC_TM_FALLING (4) /* Falling Edge Detection */ -#define IOPC_TM_EDGE (6) /* Both Edge Detection */ - -/* Port Data Register */ -#define IOPD(x) (1 << (x)) /* Signal Level of GPIO Pin x */ - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h deleted file mode 100644 index 352b7e8704d5..000000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-irq.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-irq.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - IRQ registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_IRQ_H -#define KS8695_IRQ_H - -#define KS8695_IRQ_OFFSET (0xF0000 + 0xE200) -#define KS8695_IRQ_VA (KS8695_IO_VA + KS8695_IRQ_OFFSET) -#define KS8695_IRQ_PA (KS8695_IO_PA + KS8695_IRQ_OFFSET) - - -/* - * Interrupt Controller registers - */ -#define KS8695_INTMC (0x00) /* Mode Control Register */ -#define KS8695_INTEN (0x04) /* Interrupt Enable Register */ -#define KS8695_INTST (0x08) /* Interrupt Status Register */ -#define KS8695_INTPW (0x0c) /* Interrupt Priority (WAN MAC) */ -#define KS8695_INTPH (0x10) /* Interrupt Priority (HPNA) [KS8695 only] */ -#define KS8695_INTPL (0x14) /* Interrupt Priority (LAN MAC) */ -#define KS8695_INTPT (0x18) /* Interrupt Priority (Timer) */ -#define KS8695_INTPU (0x1c) /* Interrupt Priority (UART) */ -#define KS8695_INTPE (0x20) /* Interrupt Priority (External Interrupt) */ -#define KS8695_INTPC (0x24) /* Interrupt Priority (Communications Channel) */ -#define KS8695_INTPBE (0x28) /* Interrupt Priority (Bus Error Response) */ -#define KS8695_INTMS (0x2c) /* Interrupt Mask Status Register */ -#define KS8695_INTHPF (0x30) /* Interrupt Pending Highest Priority (FIQ) */ -#define KS8695_INTHPI (0x34) /* Interrupt Pending Highest Priority (IRQ) */ - - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h deleted file mode 100644 index 2740c52494a0..000000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-misc.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-misc.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Miscellaneous Registers - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_MISC_H -#define KS8695_MISC_H - -#define KS8695_MISC_OFFSET (0xF0000 + 0xEA00) -#define KS8695_MISC_VA (KS8695_IO_VA + KS8695_MISC_OFFSET) -#define KS8695_MISC_PA (KS8695_IO_PA + KS8695_MISC_OFFSET) - - -/* - * Miscellaneous registers - */ -#define KS8695_DID (0x00) /* Device ID */ -#define KS8695_RID (0x04) /* Revision ID */ -#define KS8695_HMC (0x08) /* HPNA Miscellaneous Control [KS8695 only] */ -#define KS8695_WMC (0x0c) /* WAN Miscellaneous Control */ -#define KS8695_WPPM (0x10) /* WAN PHY Power Management */ -#define KS8695_PPS (0x1c) /* PHY PowerSave */ - -/* Device ID Register */ -#define DID_ID (0xffff << 0) /* Device ID */ - -/* Revision ID Register */ -#define RID_SUBID (0xf << 4) /* Sub-Device ID */ -#define RID_REVISION (0xf << 0) /* Revision ID */ - -/* HPNA Miscellaneous Control Register */ -#define HMC_HSS (1 << 1) /* Speed */ -#define HMC_HDS (1 << 0) /* Duplex */ - -/* WAN Miscellaneous Control Register */ -#define WMC_WANC (1 << 30) /* Auto-negotiation complete */ -#define WMC_WANR (1 << 29) /* Auto-negotiation restart */ -#define WMC_WANAP (1 << 28) /* Advertise Pause */ -#define WMC_WANA100F (1 << 27) /* Advertise 100 FDX */ -#define WMC_WANA100H (1 << 26) /* Advertise 100 HDX */ -#define WMC_WANA10F (1 << 25) /* Advertise 10 FDX */ -#define WMC_WANA10H (1 << 24) /* Advertise 10 HDX */ -#define WMC_WLS (1 << 23) /* Link status */ -#define WMC_WDS (1 << 22) /* Duplex status */ -#define WMC_WSS (1 << 21) /* Speed status */ -#define WMC_WLPP (1 << 20) /* Link Partner Pause */ -#define WMC_WLP100F (1 << 19) /* Link Partner 100 FDX */ -#define WMC_WLP100H (1 << 18) /* Link Partner 100 HDX */ -#define WMC_WLP10F (1 << 17) /* Link Partner 10 FDX */ -#define WMC_WLP10H (1 << 16) /* Link Partner 10 HDX */ -#define WMC_WAND (1 << 15) /* Auto-negotiation disable */ -#define WMC_WANF100 (1 << 14) /* Force 100 */ -#define WMC_WANFF (1 << 13) /* Force FDX */ -#define WMC_WLED1S (7 << 4) /* LED1 Select */ -#define WLED1S_SPEED (0 << 4) -#define WLED1S_LINK (1 << 4) -#define WLED1S_DUPLEX (2 << 4) -#define WLED1S_COLLISION (3 << 4) -#define WLED1S_ACTIVITY (4 << 4) -#define WLED1S_FDX_COLLISION (5 << 4) -#define WLED1S_LINK_ACTIVITY (6 << 4) -#define WMC_WLED0S (7 << 0) /* LED0 Select */ -#define WLED0S_SPEED (0 << 0) -#define WLED0S_LINK (1 << 0) -#define WLED0S_DUPLEX (2 << 0) -#define WLED0S_COLLISION (3 << 0) -#define WLED0S_ACTIVITY (4 << 0) -#define WLED0S_FDX_COLLISION (5 << 0) -#define WLED0S_LINK_ACTIVITY (6 << 0) - -/* WAN PHY Power Management Register */ -#define WPPM_WLPBK (1 << 14) /* Local Loopback */ -#define WPPM_WRLPKB (1 << 13) /* Remove Loopback */ -#define WPPM_WPI (1 << 12) /* PHY isolate */ -#define WPPM_WFL (1 << 10) /* Force link */ -#define WPPM_MDIXS (1 << 9) /* MDIX Status */ -#define WPPM_FEF (1 << 8) /* Far End Fault */ -#define WPPM_AMDIXP (1 << 7) /* Auto MDIX Parameter */ -#define WPPM_TXDIS (1 << 6) /* Disable transmitter */ -#define WPPM_DFEF (1 << 5) /* Disable Far End Fault */ -#define WPPM_PD (1 << 4) /* Power Down */ -#define WPPM_DMDX (1 << 3) /* Disable Auto MDI/MDIX */ -#define WPPM_FMDX (1 << 2) /* Force MDIX */ -#define WPPM_LPBK (1 << 1) /* MAX Loopback */ - -/* PHY Power Save Register */ -#define PPS_PPSM (1 << 0) /* PHY Power Save Mode */ - - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h deleted file mode 100644 index 97e8acb1cf6c..000000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-switch.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-switch.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Switch Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_SWITCH_H -#define KS8695_SWITCH_H - -#define KS8695_SWITCH_OFFSET (0xF0000 + 0xe800) -#define KS8695_SWITCH_VA (KS8695_IO_VA + KS8695_SWITCH_OFFSET) -#define KS8695_SWITCH_PA (KS8695_IO_PA + KS8695_SWITCH_OFFSET) - - -/* - * Switch registers - */ -#define KS8695_SEC0 (0x00) /* Switch Engine Control 0 */ -#define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ -#define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ - -#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ - -#define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ -#define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ -#define KS8695_SEIAC (0x50) /* Indirect Access Control */ -#define KS8695_SEIADH2 (0x54) /* Indirect Access Data High 2 */ -#define KS8695_SEIADH1 (0x58) /* Indirect Access Data High 1 */ -#define KS8695_SEIADL (0x5c) /* Indirect Access Data Low */ -#define KS8695_SEAFC (0x60) /* Advance Feature Control */ -#define KS8695_SEDSCPH (0x64) /* TOS Priority High */ -#define KS8695_SEDSCPL (0x68) /* TOS Priority Low */ -#define KS8695_SEMAH (0x6c) /* Switch Engine MAC Address High */ -#define KS8695_SEMAL (0x70) /* Switch Engine MAC Address Low */ -#define KS8695_LPPM12 (0x74) /* Port 1 & 2 PHY Power Management */ -#define KS8695_LPPM34 (0x78) /* Port 3 & 4 PHY Power Management */ - - -/* Switch Engine Control 0 */ -#define SEC0_LLED1S (7 << 25) /* LED1 Select */ -#define LLED1S_SPEED (0 << 25) -#define LLED1S_LINK (1 << 25) -#define LLED1S_DUPLEX (2 << 25) -#define LLED1S_COLLISION (3 << 25) -#define LLED1S_ACTIVITY (4 << 25) -#define LLED1S_FDX_COLLISION (5 << 25) -#define LLED1S_LINK_ACTIVITY (6 << 25) -#define SEC0_LLED0S (7 << 22) /* LED0 Select */ -#define LLED0S_SPEED (0 << 22) -#define LLED0S_LINK (1 << 22) -#define LLED0S_DUPLEX (2 << 22) -#define LLED0S_COLLISION (3 << 22) -#define LLED0S_ACTIVITY (4 << 22) -#define LLED0S_FDX_COLLISION (5 << 22) -#define LLED0S_LINK_ACTIVITY (6 << 22) -#define SEC0_ENABLE (1 << 0) /* Enable Switch */ - - - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h deleted file mode 100644 index 941a542c5f23..000000000000 --- a/arch/arm/mach-ks8695/include/mach/regs-uart.h +++ /dev/null @@ -1,89 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ks8695/include/mach/regs-uart.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - UART register and bit definitions. - */ - -#ifndef KS8695_UART_H -#define KS8695_UART_H - -#define KS8695_UART_OFFSET (0xF0000 + 0xE000) -#define KS8695_UART_VA (KS8695_IO_VA + KS8695_UART_OFFSET) -#define KS8695_UART_PA (KS8695_IO_PA + KS8695_UART_OFFSET) - - -/* - * UART registers - */ -#define KS8695_URRB (0x00) /* Receive Buffer Register */ -#define KS8695_URTH (0x04) /* Transmit Holding Register */ -#define KS8695_URFC (0x08) /* FIFO Control Register */ -#define KS8695_URLC (0x0C) /* Line Control Register */ -#define KS8695_URMC (0x10) /* Modem Control Register */ -#define KS8695_URLS (0x14) /* Line Status Register */ -#define KS8695_URMS (0x18) /* Modem Status Register */ -#define KS8695_URBD (0x1C) /* Baud Rate Divisor Register */ -#define KS8695_USR (0x20) /* Status Register */ - - -/* FIFO Control Register */ -#define URFC_URFRT (3 << 6) /* Receive FIFO Trigger Level */ -#define URFC_URFRT_1 (0 << 6) -#define URFC_URFRT_4 (1 << 6) -#define URFC_URFRT_8 (2 << 6) -#define URFC_URFRT_14 (3 << 6) -#define URFC_URTFR (1 << 2) /* Transmit FIFO Reset */ -#define URFC_URRFR (1 << 1) /* Receive FIFO Reset */ -#define URFC_URFE (1 << 0) /* FIFO Enable */ - -/* Line Control Register */ -#define URLC_URSBC (1 << 6) /* Set Break Condition */ -#define URLC_PARITY (7 << 3) /* Parity */ -#define URPE_NONE (0 << 3) -#define URPE_ODD (1 << 3) -#define URPE_EVEN (3 << 3) -#define URPE_MARK (5 << 3) -#define URPE_SPACE (7 << 3) -#define URLC_URSB (1 << 2) /* Stop Bits */ -#define URLC_URCL (3 << 0) /* Character Length */ -#define URCL_5 (0 << 0) -#define URCL_6 (1 << 0) -#define URCL_7 (2 << 0) -#define URCL_8 (3 << 0) - -/* Modem Control Register */ -#define URMC_URLB (1 << 4) /* Loop-back mode */ -#define URMC_UROUT2 (1 << 3) /* OUT2 signal */ -#define URMC_UROUT1 (1 << 2) /* OUT1 signal */ -#define URMC_URRTS (1 << 1) /* Request to Send */ -#define URMC_URDTR (1 << 0) /* Data Terminal Ready */ - -/* Line Status Register */ -#define URLS_URRFE (1 << 7) /* Receive FIFO Error */ -#define URLS_URTE (1 << 6) /* Transmit Empty */ -#define URLS_URTHRE (1 << 5) /* Transmit Holding Register Empty */ -#define URLS_URBI (1 << 4) /* Break Interrupt */ -#define URLS_URFE (1 << 3) /* Framing Error */ -#define URLS_URPE (1 << 2) /* Parity Error */ -#define URLS_URROE (1 << 1) /* Receive Overrun Error */ -#define URLS_URDR (1 << 0) /* Receive Data Ready */ - -/* Modem Status Register */ -#define URMS_URDCD (1 << 7) /* Data Carrier Detect */ -#define URMS_URRI (1 << 6) /* Ring Indicator */ -#define URMS_URDSR (1 << 5) /* Data Set Ready */ -#define URMS_URCTS (1 << 4) /* Clear to Send */ -#define URMS_URDDCD (1 << 3) /* Delta Data Carrier Detect */ -#define URMS_URTERI (1 << 2) /* Trailing Edge Ring Indicator */ -#define URMS_URDDST (1 << 1) /* Delta Data Set Ready */ -#define URMS_URDCTS (1 << 0) /* Delta Clear to Send */ - -/* Status Register */ -#define USR_UTI (1 << 0) /* Timeout Indication */ - - -#endif diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h deleted file mode 100644 index dc78a29759b5..000000000000 --- a/arch/arm/mach-ks8695/include/mach/uncompress.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ks8695/include/mach/uncompress.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - Kernel uncompressor - */ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <linux/io.h> -#include <mach/regs-uart.h> - -static inline void putc(char c) -{ - while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE)) - barrier(); - - __raw_writel(c, (void __iomem*)KS8695_UART_PA + KS8695_URTH); -} - -static inline void flush(void) -{ - while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTE)) - barrier(); -} - -#define arch_decomp_setup() - -#endif diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c deleted file mode 100644 index 4b7ec8d9300c..000000000000 --- a/arch/arm/mach-ks8695/irq.c +++ /dev/null @@ -1,164 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ks8695/irq.c - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <asm/mach/irq.h> - -#include <mach/regs-irq.h> -#include <mach/regs-gpio.h> - -static void ks8695_irq_mask(struct irq_data *d) -{ - unsigned long inten; - - inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN); - inten &= ~(1 << d->irq); - - __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN); -} - -static void ks8695_irq_unmask(struct irq_data *d) -{ - unsigned long inten; - - inten = __raw_readl(KS8695_IRQ_VA + KS8695_INTEN); - inten |= (1 << d->irq); - - __raw_writel(inten, KS8695_IRQ_VA + KS8695_INTEN); -} - -static void ks8695_irq_ack(struct irq_data *d) -{ - __raw_writel((1 << d->irq), KS8695_IRQ_VA + KS8695_INTST); -} - - -static struct irq_chip ks8695_irq_level_chip; -static struct irq_chip ks8695_irq_edge_chip; - - -static int ks8695_irq_set_type(struct irq_data *d, unsigned int type) -{ - unsigned long ctrl, mode; - unsigned short level_triggered = 0; - - ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); - - switch (type) { - case IRQ_TYPE_LEVEL_HIGH: - mode = IOPC_TM_HIGH; - level_triggered = 1; - break; - case IRQ_TYPE_LEVEL_LOW: - mode = IOPC_TM_LOW; - level_triggered = 1; - break; - case IRQ_TYPE_EDGE_RISING: - mode = IOPC_TM_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - mode = IOPC_TM_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - mode = IOPC_TM_EDGE; - break; - default: - return -EINVAL; - } - - switch (d->irq) { - case KS8695_IRQ_EXTERN0: - ctrl &= ~IOPC_IOEINT0TM; - ctrl |= IOPC_IOEINT0_MODE(mode); - break; - case KS8695_IRQ_EXTERN1: - ctrl &= ~IOPC_IOEINT1TM; - ctrl |= IOPC_IOEINT1_MODE(mode); - break; - case KS8695_IRQ_EXTERN2: - ctrl &= ~IOPC_IOEINT2TM; - ctrl |= IOPC_IOEINT2_MODE(mode); - break; - case KS8695_IRQ_EXTERN3: - ctrl &= ~IOPC_IOEINT3TM; - ctrl |= IOPC_IOEINT3_MODE(mode); - break; - default: - return -EINVAL; - } - - if (level_triggered) { - irq_set_chip_and_handler(d->irq, &ks8695_irq_level_chip, - handle_level_irq); - } - else { - irq_set_chip_and_handler(d->irq, &ks8695_irq_edge_chip, - handle_edge_irq); - } - - __raw_writel(ctrl, KS8695_GPIO_VA + KS8695_IOPC); - return 0; -} - -static struct irq_chip ks8695_irq_level_chip = { - .irq_ack = ks8695_irq_mask, - .irq_mask = ks8695_irq_mask, - .irq_unmask = ks8695_irq_unmask, - .irq_set_type = ks8695_irq_set_type, -}; - -static struct irq_chip ks8695_irq_edge_chip = { - .irq_ack = ks8695_irq_ack, - .irq_mask = ks8695_irq_mask, - .irq_unmask = ks8695_irq_unmask, - .irq_set_type = ks8695_irq_set_type, -}; - -void __init ks8695_init_irq(void) -{ - unsigned int irq; - - /* Disable all interrupts initially */ - __raw_writel(0, KS8695_IRQ_VA + KS8695_INTMC); - __raw_writel(0, KS8695_IRQ_VA + KS8695_INTEN); - - for (irq = 0; irq < NR_IRQS; irq++) { - switch (irq) { - /* Level-triggered interrupts */ - case KS8695_IRQ_BUS_ERROR: - case KS8695_IRQ_UART_MODEM_STATUS: - case KS8695_IRQ_UART_LINE_STATUS: - case KS8695_IRQ_UART_RX: - case KS8695_IRQ_COMM_TX: - case KS8695_IRQ_COMM_RX: - irq_set_chip_and_handler(irq, - &ks8695_irq_level_chip, - handle_level_irq); - break; - - /* Edge-triggered interrupts */ - default: - /* clear pending bit */ - ks8695_irq_ack(irq_get_irq_data(irq)); - irq_set_chip_and_handler(irq, - &ks8695_irq_edge_chip, - handle_edge_irq); - } - - irq_clear_status_flags(irq, IRQ_NOREQUEST); - } -} diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c deleted file mode 100644 index 83f330bf07dd..000000000000 --- a/arch/arm/mach-ks8695/pci.c +++ /dev/null @@ -1,247 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ks8695/pci.c - * - * Copyright (C) 2003, Micrel Semiconductors - * Copyright (C) 2006, Greg Ungerer <gerg@snapgear.com> - * Copyright (C) 2006, Ben Dooks - * Copyright (C) 2007, Andrew Victor - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include <asm/signal.h> -#include <asm/mach/pci.h> -#include <mach/hardware.h> - -#include "devices.h" -#include "regs-pci.h" - - -static int pci_dbg; - -static void ks8695_pci_setupconfig(unsigned int bus_nr, unsigned int devfn, unsigned int where) -{ - unsigned long pbca; - - pbca = PBCA_ENABLE | (where & ~3); - pbca |= PCI_SLOT(devfn) << 11 ; - pbca |= PCI_FUNC(devfn) << 8; - pbca |= bus_nr << 16; - - if (bus_nr == 0) { - /* use Type-0 transaction */ - __raw_writel(pbca, KS8695_PCI_VA + KS8695_PBCA); - } else { - /* use Type-1 transaction */ - __raw_writel(pbca | PBCA_TYPE1, KS8695_PCI_VA + KS8695_PBCA); - } -} - -static void __iomem *ks8695_pci_map_bus(struct pci_bus *bus, unsigned int devfn, - int where) -{ - ks8695_pci_setupconfig(bus->number, devfn, where); - return KS8695_PCI_VA + KS8695_PBCD; -} - -static void ks8695_local_writeconfig(int where, u32 value) -{ - ks8695_pci_setupconfig(0, 0, where); - __raw_writel(value, KS8695_PCI_VA + KS8695_PBCD); -} - -static struct pci_ops ks8695_pci_ops = { - .map_bus = ks8695_pci_map_bus, - .read = pci_generic_config_read32, - .write = pci_generic_config_write32, -}; - -static struct resource pci_mem = { - .name = "PCI Memory space", - .start = KS8695_PCIMEM_PA, - .end = KS8695_PCIMEM_PA + (KS8695_PCIMEM_SIZE - 1), - .flags = IORESOURCE_MEM, -}; - -static struct resource pci_io = { - .name = "PCI IO space", - .start = KS8695_PCIIO_PA, - .end = KS8695_PCIIO_PA + (KS8695_PCIIO_SIZE - 1), - .flags = IORESOURCE_IO, -}; - -static int __init ks8695_pci_setup(int nr, struct pci_sys_data *sys) -{ - if (nr > 0) - return 0; - - request_resource(&iomem_resource, &pci_mem); - request_resource(&ioport_resource, &pci_io); - - pci_add_resource_offset(&sys->resources, &pci_io, sys->io_offset); - pci_add_resource_offset(&sys->resources, &pci_mem, sys->mem_offset); - - /* Assign and enable processor bridge */ - ks8695_local_writeconfig(PCI_BASE_ADDRESS_0, KS8695_PCIMEM_PA); - - /* Enable bus-master & Memory Space access */ - ks8695_local_writeconfig(PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - - /* Set cache-line size & latency. */ - ks8695_local_writeconfig(PCI_CACHE_LINE_SIZE, (32 << 8) | (L1_CACHE_BYTES / sizeof(u32))); - - /* Reserve PCI memory space for PCI-AHB resources */ - if (!request_mem_region(KS8695_PCIMEM_PA, SZ_64M, "PCI-AHB Bridge")) { - printk(KERN_ERR "Cannot allocate PCI-AHB Bridge memory.\n"); - return -EBUSY; - } - - return 1; -} - -static inline unsigned int size_mask(unsigned long size) -{ - return (~size) + 1; -} - -static int ks8695_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - unsigned long pc = instruction_pointer(regs); - unsigned long instr = *(unsigned long *)pc; - unsigned long cmdstat; - - cmdstat = __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS); - - printk(KERN_ERR "PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx [%s%s%s%s%s]\n", - addr, fsr, regs->ARM_pc, regs->ARM_lr, - cmdstat & (PCI_STATUS_SIG_TARGET_ABORT << 16) ? "GenTarget" : " ", - cmdstat & (PCI_STATUS_REC_TARGET_ABORT << 16) ? "RecvTarget" : " ", - cmdstat & (PCI_STATUS_REC_MASTER_ABORT << 16) ? "MasterAbort" : " ", - cmdstat & (PCI_STATUS_SIG_SYSTEM_ERROR << 16) ? "SysError" : " ", - cmdstat & (PCI_STATUS_DETECTED_PARITY << 16) ? "Parity" : " " - ); - - __raw_writel(cmdstat, KS8695_PCI_VA + KS8695_CRCFCS); - - /* - * If the instruction being executed was a read, - * make it look like it read all-ones. - */ - if ((instr & 0x0c100000) == 0x04100000) { - int reg = (instr >> 12) & 15; - unsigned long val; - - if (instr & 0x00400000) - val = 255; - else - val = -1; - - regs->uregs[reg] = val; - regs->ARM_pc += 4; - return 0; - } - - if ((instr & 0x0e100090) == 0x00100090) { - int reg = (instr >> 12) & 15; - - regs->uregs[reg] = -1; - regs->ARM_pc += 4; - return 0; - } - - return 1; -} - -static void __init ks8695_pci_preinit(void) -{ - /* make software reset to avoid freeze if PCI bus was messed up */ - __raw_writel(0x80000000, KS8695_PCI_VA + KS8695_PBCS); - - /* stage 1 initialization, subid, subdevice = 0x0001 */ - __raw_writel(0x00010001, KS8695_PCI_VA + KS8695_CRCSID); - - /* stage 2 initialization */ - /* prefetch limits with 16 words, retry enable */ - __raw_writel(0x40000000, KS8695_PCI_VA + KS8695_PBCS); - - /* configure memory mapping */ - __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBA); - __raw_writel(size_mask(KS8695_PCIMEM_SIZE), KS8695_PCI_VA + KS8695_PMBAM); - __raw_writel(KS8695_PCIMEM_PA, KS8695_PCI_VA + KS8695_PMBAT); - __raw_writel(0, KS8695_PCI_VA + KS8695_PMBAC); - - /* configure IO mapping */ - __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBA); - __raw_writel(size_mask(KS8695_PCIIO_SIZE), KS8695_PCI_VA + KS8695_PIOBAM); - __raw_writel(KS8695_PCIIO_PA, KS8695_PCI_VA + KS8695_PIOBAT); - __raw_writel(0, KS8695_PCI_VA + KS8695_PIOBAC); - - /* hook in fault handlers */ - hook_fault_code(8, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); - hook_fault_code(10, ks8695_pci_fault, SIGBUS, 0, "external abort on non-linefetch"); -} - -static void ks8695_show_pciregs(void) -{ - if (!pci_dbg) - return; - - printk(KERN_INFO "PCI: CRCFID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFID)); - printk(KERN_INFO "PCI: CRCFCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFCS)); - printk(KERN_INFO "PCI: CRCFRV = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFRV)); - printk(KERN_INFO "PCI: CRCFLT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFLT)); - printk(KERN_INFO "PCI: CRCBMA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCBMA)); - printk(KERN_INFO "PCI: CRCSID = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCSID)); - printk(KERN_INFO "PCI: CRCFIT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_CRCFIT)); - - printk(KERN_INFO "PCI: PBM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBM)); - printk(KERN_INFO "PCI: PBCS = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PBCS)); - - printk(KERN_INFO "PCI: PMBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBA)); - printk(KERN_INFO "PCI: PMBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAC)); - printk(KERN_INFO "PCI: PMBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAM)); - printk(KERN_INFO "PCI: PMBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PMBAT)); - - printk(KERN_INFO "PCI: PIOBA = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBA)); - printk(KERN_INFO "PCI: PIOBAC = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAC)); - printk(KERN_INFO "PCI: PIOBAM = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAM)); - printk(KERN_INFO "PCI: PIOBAT = %08x\n", __raw_readl(KS8695_PCI_VA + KS8695_PIOBAT)); -} - - -static struct hw_pci ks8695_pci __initdata = { - .nr_controllers = 1, - .ops = &ks8695_pci_ops, - .preinit = ks8695_pci_preinit, - .setup = ks8695_pci_setup, - .postinit = NULL, - .map_irq = NULL, -}; - -void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg) -{ - if (__raw_readl(KS8695_PCI_VA + KS8695_CRCFRV) & CFRV_GUEST) { - printk("PCI: KS8695 in guest mode, not initialising\n"); - return; - } - - pcibios_min_io = 0; - pcibios_min_mem = 0; - - printk(KERN_INFO "PCI: Initialising\n"); - ks8695_show_pciregs(); - - /* set Mode */ - __raw_writel(cfg->mode << 29, KS8695_PCI_VA + KS8695_PBM); - - ks8695_pci.map_irq = cfg->map_irq; /* board-specific map_irq method */ - - pci_common_init(&ks8695_pci); -} diff --git a/arch/arm/mach-ks8695/regs-hpna.h b/arch/arm/mach-ks8695/regs-hpna.h deleted file mode 100644 index 815ce5c2e3b9..000000000000 --- a/arch/arm/mach-ks8695/regs-hpna.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-wan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - HPNA Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_HPNA_H -#define KS8695_HPNA_H - -#define KS8695_HPNA_OFFSET (0xF0000 + 0xA000) -#define KS8695_HPNA_VA (KS8695_IO_VA + KS8695_HPNA_OFFSET) -#define KS8695_HPNA_PA (KS8695_IO_PA + KS8695_HPNA_OFFSET) - - -/* - * HPNA registers - */ - -#endif diff --git a/arch/arm/mach-ks8695/regs-lan.h b/arch/arm/mach-ks8695/regs-lan.h deleted file mode 100644 index 82c5f3791afb..000000000000 --- a/arch/arm/mach-ks8695/regs-lan.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-lan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - LAN Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_LAN_H -#define KS8695_LAN_H - -#define KS8695_LAN_OFFSET (0xF0000 + 0x8000) -#define KS8695_LAN_VA (KS8695_IO_VA + KS8695_LAN_OFFSET) -#define KS8695_LAN_PA (KS8695_IO_PA + KS8695_LAN_OFFSET) - - -/* - * LAN registers - */ -#define KS8695_LMDTXC (0x00) /* DMA Transmit Control */ -#define KS8695_LMDRXC (0x04) /* DMA Receive Control */ -#define KS8695_LMDTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_LMDRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_LTDLB (0x10) /* Transmit Descriptor List Base Address */ -#define KS8695_LRDLB (0x14) /* Receive Descriptor List Base Address */ -#define KS8695_LMAL (0x18) /* MAC Station Address Low */ -#define KS8695_LMAH (0x1c) /* MAC Station Address High */ -#define KS8695_LMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */ -#define KS8695_LMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */ - - -/* DMA Transmit Control Register */ -#define LMDTXC_LMTRST (1 << 31) /* Soft Reset */ -#define LMDTXC_LMTBS (0x3f << 24) /* Transmit Burst Size */ -#define LMDTXC_LMTUCG (1 << 18) /* Transmit UDP Checksum Generate */ -#define LMDTXC_LMTTCG (1 << 17) /* Transmit TCP Checksum Generate */ -#define LMDTXC_LMTICG (1 << 16) /* Transmit IP Checksum Generate */ -#define LMDTXC_LMTFCE (1 << 9) /* Transmit Flow Control Enable */ -#define LMDTXC_LMTLB (1 << 8) /* Loopback mode */ -#define LMDTXC_LMTEP (1 << 2) /* Transmit Enable Padding */ -#define LMDTXC_LMTAC (1 << 1) /* Transmit Add CRC */ -#define LMDTXC_LMTE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define LMDRXC_LMRBS (0x3f << 24) /* Receive Burst Size */ -#define LMDRXC_LMRUCC (1 << 18) /* Receive UDP Checksum check */ -#define LMDRXC_LMRTCG (1 << 17) /* Receive TCP Checksum check */ -#define LMDRXC_LMRICG (1 << 16) /* Receive IP Checksum check */ -#define LMDRXC_LMRFCE (1 << 9) /* Receive Flow Control Enable */ -#define LMDRXC_LMRB (1 << 6) /* Receive Broadcast */ -#define LMDRXC_LMRM (1 << 5) /* Receive Multicast */ -#define LMDRXC_LMRU (1 << 4) /* Receive Unicast */ -#define LMDRXC_LMRERR (1 << 3) /* Receive Error Frame */ -#define LMDRXC_LMRA (1 << 2) /* Receive All */ -#define LMDRXC_LMRE (1 << 1) /* RX Enable */ - -/* Additional Station Address High */ -#define LMAAH_E (1 << 31) /* Address Enabled */ - - -#endif diff --git a/arch/arm/mach-ks8695/regs-mem.h b/arch/arm/mach-ks8695/regs-mem.h deleted file mode 100644 index 55806bc68ce3..000000000000 --- a/arch/arm/mach-ks8695/regs-mem.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-mem.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - Memory Controller registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_MEM_H -#define KS8695_MEM_H - -#define KS8695_MEM_OFFSET (0xF0000 + 0x4000) -#define KS8695_MEM_VA (KS8695_IO_VA + KS8695_MEM_OFFSET) -#define KS8695_MEM_PA (KS8695_IO_PA + KS8695_MEM_OFFSET) - - -/* - * Memory Controller Registers - */ -#define KS8695_EXTACON0 (0x00) /* External I/O 0 Access Control */ -#define KS8695_EXTACON1 (0x04) /* External I/O 1 Access Control */ -#define KS8695_EXTACON2 (0x08) /* External I/O 2 Access Control */ -#define KS8695_ROMCON0 (0x10) /* ROM/SRAM/Flash 1 Control Register */ -#define KS8695_ROMCON1 (0x14) /* ROM/SRAM/Flash 2 Control Register */ -#define KS8695_ERGCON (0x20) /* External I/O and ROM/SRAM/Flash General Register */ -#define KS8695_SDCON0 (0x30) /* SDRAM Control Register 0 */ -#define KS8695_SDCON1 (0x34) /* SDRAM Control Register 1 */ -#define KS8695_SDGCON (0x38) /* SDRAM General Control */ -#define KS8695_SDBCON (0x3c) /* SDRAM Buffer Control */ -#define KS8695_REFTIM (0x40) /* SDRAM Refresh Timer */ - - -/* External I/O Access Control Registers */ -#define EXTACON_EBNPTR (0x3ff << 22) /* Last Address Pointer */ -#define EXTACON_EBBPTR (0x3ff << 12) /* Base Pointer */ -#define EXTACON_EBTACT (7 << 9) /* Write Enable/Output Enable Active Time */ -#define EXTACON_EBTCOH (7 << 6) /* Chip Select Hold Time */ -#define EXTACON_EBTACS (7 << 3) /* Address Setup Time before ECSN */ -#define EXTACON_EBTCOS (7 << 0) /* Chip Select Time before OEN */ - -/* ROM/SRAM/Flash Control Register */ -#define ROMCON_RBNPTR (0x3ff << 22) /* Next Pointer */ -#define ROMCON_RBBPTR (0x3ff << 12) /* Base Pointer */ -#define ROMCON_RBTACC (7 << 4) /* Access Cycle Time */ -#define ROMCON_RBTPA (3 << 2) /* Page Address Access Time */ -#define ROMCON_PMC (3 << 0) /* Page Mode Configuration */ -#define PMC_NORMAL (0 << 0) -#define PMC_4WORD (1 << 0) -#define PMC_8WORD (2 << 0) -#define PMC_16WORD (3 << 0) - -/* External I/O and ROM/SRAM/Flash General Register */ -#define ERGCON_TMULT (3 << 28) /* Time Multiplier */ -#define ERGCON_DSX2 (3 << 20) /* Data Width (External I/O Bank 2) */ -#define ERGCON_DSX1 (3 << 18) /* Data Width (External I/O Bank 1) */ -#define ERGCON_DSX0 (3 << 16) /* Data Width (External I/O Bank 0) */ -#define ERGCON_DSR1 (3 << 2) /* Data Width (ROM/SRAM/Flash Bank 1) */ -#define ERGCON_DSR0 (3 << 0) /* Data Width (ROM/SRAM/Flash Bank 0) */ - -/* SDRAM Control Register */ -#define SDCON_DBNPTR (0x3ff << 22) /* Last Address Pointer */ -#define SDCON_DBBPTR (0x3ff << 12) /* Base Pointer */ -#define SDCON_DBCAB (3 << 8) /* Column Address Bits */ -#define SDCON_DBBNUM (1 << 3) /* Number of Banks */ -#define SDCON_DBDBW (3 << 1) /* Data Bus Width */ - -/* SDRAM General Control Register */ -#define SDGCON_SDTRC (3 << 2) /* RAS to CAS latency */ -#define SDGCON_SDCAS (3 << 0) /* CAS latency */ - -/* SDRAM Buffer Control Register */ -#define SDBCON_SDESTA (1 << 31) /* SDRAM Engine Status */ -#define SDBCON_RBUFBDIS (1 << 24) /* Read Buffer Burst Enable */ -#define SDBCON_WFIFOEN (1 << 23) /* Write FIFO Enable */ -#define SDBCON_RBUFEN (1 << 22) /* Read Buffer Enable */ -#define SDBCON_FLUSHWFIFO (1 << 21) /* Flush Write FIFO */ -#define SDBCON_RBUFINV (1 << 20) /* Read Buffer Invalidate */ -#define SDBCON_SDINI (3 << 16) /* SDRAM Initialization Control */ -#define SDBCON_SDMODE (0x3fff << 0) /* SDRAM Mode Register Value Program */ - -/* SDRAM Refresh Timer Register */ -#define REFTIM_REFTIM (0xffff << 0) /* Refresh Timer Value */ - - -#endif diff --git a/arch/arm/mach-ks8695/regs-pci.h b/arch/arm/mach-ks8695/regs-pci.h deleted file mode 100644 index 75a9db6edbd9..000000000000 --- a/arch/arm/mach-ks8695/regs-pci.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-pci.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - PCI bridge registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define KS8695_PCI_OFFSET (0xF0000 + 0x2000) -#define KS8695_PCI_VA (KS8695_IO_VA + KS8695_PCI_OFFSET) -#define KS8695_PCI_PA (KS8695_IO_PA + KS8695_PCI_OFFSET) - - -#define KS8695_CRCFID (0x000) /* Configuration: Identification */ -#define KS8695_CRCFCS (0x004) /* Configuration: Command and Status */ -#define KS8695_CRCFRV (0x008) /* Configuration: Revision */ -#define KS8695_CRCFLT (0x00C) /* Configuration: Latency Timer */ -#define KS8695_CRCBMA (0x010) /* Configuration: Base Memory Address */ -#define KS8695_CRCSID (0x02C) /* Configuration: Subsystem ID */ -#define KS8695_CRCFIT (0x03C) /* Configuration: Interrupt */ -#define KS8695_PBCA (0x100) /* Bridge Configuration Address */ -#define KS8695_PBCD (0x104) /* Bridge Configuration Data */ -#define KS8695_PBM (0x200) /* Bridge Mode */ -#define KS8695_PBCS (0x204) /* Bridge Control and Status */ -#define KS8695_PMBA (0x208) /* Bridge Memory Base Address */ -#define KS8695_PMBAC (0x20C) /* Bridge Memory Base Address Control */ -#define KS8695_PMBAM (0x210) /* Bridge Memory Base Address Mask */ -#define KS8695_PMBAT (0x214) /* Bridge Memory Base Address Translation */ -#define KS8695_PIOBA (0x218) /* Bridge I/O Base Address */ -#define KS8695_PIOBAC (0x21C) /* Bridge I/O Base Address Control */ -#define KS8695_PIOBAM (0x220) /* Bridge I/O Base Address Mask */ -#define KS8695_PIOBAT (0x224) /* Bridge I/O Base Address Translation */ - - -/* Configuration: Identification */ - -/* Configuration: Command and Status */ - -/* Configuration: Revision */ - - - -#define CFRV_GUEST (1 << 23) - -#define PBCA_TYPE1 (1) -#define PBCA_ENABLE (1 << 31) - - diff --git a/arch/arm/mach-ks8695/regs-sys.h b/arch/arm/mach-ks8695/regs-sys.h deleted file mode 100644 index 57c20be0c129..000000000000 --- a/arch/arm/mach-ks8695/regs-sys.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-sys.h - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - * - * KS8695 - System control registers and bit definitions - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_SYS_H -#define KS8695_SYS_H - -#define KS8695_SYS_OFFSET (0xF0000 + 0x0000) -#define KS8695_SYS_VA (KS8695_IO_VA + KS8695_SYS_OFFSET) -#define KS8695_SYS_PA (KS8695_IO_PA + KS8695_SYS_OFFSET) - - -#define KS8695_SYSCFG (0x00) /* System Configuration Register */ -#define KS8695_CLKCON (0x04) /* System Clock and Bus Control Register */ - - -/* System Configuration Register */ -#define SYSCFG_SPRBP (0x3ff << 16) /* Register Bank Base Pointer */ - -/* System Clock and Bus Control Register */ -#define CLKCON_SFMODE (1 << 8) /* System Fast Mode for Simulation */ -#define CLKCON_SCDC (7 << 0) /* System Clock Divider Select */ - - -#endif diff --git a/arch/arm/mach-ks8695/regs-wan.h b/arch/arm/mach-ks8695/regs-wan.h deleted file mode 100644 index c475bed22b8e..000000000000 --- a/arch/arm/mach-ks8695/regs-wan.h +++ /dev/null @@ -1,65 +0,0 @@ -/* - * arch/arm/mach-ks8695/include/mach/regs-wan.h - * - * Copyright (C) 2006 Andrew Victor - * - * KS8695 - WAN Registers and bit definitions. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef KS8695_WAN_H -#define KS8695_WAN_H - -#define KS8695_WAN_OFFSET (0xF0000 + 0x6000) -#define KS8695_WAN_VA (KS8695_IO_VA + KS8695_WAN_OFFSET) -#define KS8695_WAN_PA (KS8695_IO_PA + KS8695_WAN_OFFSET) - - -/* - * WAN registers - */ -#define KS8695_WMDTXC (0x00) /* DMA Transmit Control */ -#define KS8695_WMDRXC (0x04) /* DMA Receive Control */ -#define KS8695_WMDTSC (0x08) /* DMA Transmit Start Command */ -#define KS8695_WMDRSC (0x0c) /* DMA Receive Start Command */ -#define KS8695_WTDLB (0x10) /* Transmit Descriptor List Base Address */ -#define KS8695_WRDLB (0x14) /* Receive Descriptor List Base Address */ -#define KS8695_WMAL (0x18) /* MAC Station Address Low */ -#define KS8695_WMAH (0x1c) /* MAC Station Address High */ -#define KS8695_WMAAL(n) (0x80 + ((n)*8)) /* MAC Additional Station Address (0..15) Low */ -#define KS8695_WMAAH(n) (0x84 + ((n)*8)) /* MAC Additional Station Address (0..15) High */ - - -/* DMA Transmit Control Register */ -#define WMDTXC_WMTRST (1 << 31) /* Soft Reset */ -#define WMDTXC_WMTBS (0x3f << 24) /* Transmit Burst Size */ -#define WMDTXC_WMTUCG (1 << 18) /* Transmit UDP Checksum Generate */ -#define WMDTXC_WMTTCG (1 << 17) /* Transmit TCP Checksum Generate */ -#define WMDTXC_WMTICG (1 << 16) /* Transmit IP Checksum Generate */ -#define WMDTXC_WMTFCE (1 << 9) /* Transmit Flow Control Enable */ -#define WMDTXC_WMTLB (1 << 8) /* Loopback mode */ -#define WMDTXC_WMTEP (1 << 2) /* Transmit Enable Padding */ -#define WMDTXC_WMTAC (1 << 1) /* Transmit Add CRC */ -#define WMDTXC_WMTE (1 << 0) /* TX Enable */ - -/* DMA Receive Control Register */ -#define WMDRXC_WMRBS (0x3f << 24) /* Receive Burst Size */ -#define WMDRXC_WMRUCC (1 << 18) /* Receive UDP Checksum check */ -#define WMDRXC_WMRTCG (1 << 17) /* Receive TCP Checksum check */ -#define WMDRXC_WMRICG (1 << 16) /* Receive IP Checksum check */ -#define WMDRXC_WMRFCE (1 << 9) /* Receive Flow Control Enable */ -#define WMDRXC_WMRB (1 << 6) /* Receive Broadcast */ -#define WMDRXC_WMRM (1 << 5) /* Receive Multicast */ -#define WMDRXC_WMRU (1 << 4) /* Receive Unicast */ -#define WMDRXC_WMRERR (1 << 3) /* Receive Error Frame */ -#define WMDRXC_WMRA (1 << 2) /* Receive All */ -#define WMDRXC_WMRE (1 << 0) /* RX Enable */ - -/* Additional Station Address High */ -#define WMAAH_E (1 << 31) /* Address Enabled */ - - -#endif diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c deleted file mode 100644 index 50561eec0c32..000000000000 --- a/arch/arm/mach-ks8695/time.c +++ /dev/null @@ -1,159 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * arch/arm/mach-ks8695/time.c - * - * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk> - * Copyright (C) 2006 Simtec Electronics - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/io.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> -#include <asm/system_misc.h> - -#include <mach/regs-irq.h> - -#include "generic.h" - -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) -#define KS8695_TMR_PA (KS8695_IO_PA + KS8695_TMR_OFFSET) - -/* - * Timer registers - */ -#define KS8695_TMCON (0x00) /* Timer Control Register */ -#define KS8695_T1TC (0x04) /* Timer 1 Timeout Count Register */ -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ -#define KS8695_T1PD (0x0C) /* Timer 1 Pulse Count Register */ -#define KS8695_T0PD (0x10) /* Timer 0 Pulse Count Register */ - -/* Timer Control Register */ -#define TMCON_T1EN (1 << 1) /* Timer 1 Enable */ -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ - -/* Timer0 Timeout Counter Register */ -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ - -static int ks8695_set_periodic(struct clock_event_device *evt) -{ - u32 rate = DIV_ROUND_CLOSEST(KS8695_CLOCK_RATE, HZ); - u32 half = DIV_ROUND_CLOSEST(rate, 2); - u32 tmcon; - - /* Disable timer 1 */ - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); - tmcon &= ~TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - - /* Both registers need to count down */ - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); - - /* Re-enable timer1 */ - tmcon |= TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - return 0; -} - -static int ks8695_set_next_event(unsigned long cycles, - struct clock_event_device *evt) - -{ - u32 half = DIV_ROUND_CLOSEST(cycles, 2); - u32 tmcon; - - /* Disable timer 1 */ - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); - tmcon &= ~TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - - /* Both registers need to count down */ - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1TC); - writel_relaxed(half, KS8695_TMR_VA + KS8695_T1PD); - - /* Re-enable timer1 */ - tmcon |= TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - - return 0; -} - -static struct clock_event_device clockevent_ks8695 = { - .name = "ks8695_t1tc", - /* Reasonably fast and accurate clock event */ - .rating = 300, - .features = CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_PERIODIC, - .set_next_event = ks8695_set_next_event, - .set_state_periodic = ks8695_set_periodic, -}; - -/* - * IRQ handler for the timer. - */ -static irqreturn_t ks8695_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_ks8695; - - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction ks8695_timer_irq = { - .name = "ks8695_tick", - .flags = IRQF_TIMER, - .handler = ks8695_timer_interrupt, -}; - -static void ks8695_timer_setup(void) -{ - unsigned long tmcon; - - /* Disable timer 0 and 1 */ - tmcon = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); - tmcon &= ~TMCON_T0EN; - tmcon &= ~TMCON_T1EN; - writel_relaxed(tmcon, KS8695_TMR_VA + KS8695_TMCON); - - /* - * Use timer 1 to fire IRQs on the timeline, minimum 2 cycles - * (one on each counter) maximum 2*2^32, but the API will only - * accept up to a 32bit full word (0xFFFFFFFFU). - */ - clockevents_config_and_register(&clockevent_ks8695, - KS8695_CLOCK_RATE, 2, - 0xFFFFFFFFU); -} - -void __init ks8695_timer_init(void) -{ - ks8695_timer_setup(); - - /* Enable timer interrupts */ - setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq); -} - -void ks8695_restart(enum reboot_mode reboot_mode, const char *cmd) -{ - unsigned int reg; - - if (reboot_mode == REBOOT_SOFT) - soft_restart(0); - - /* disable timer0 */ - reg = readl_relaxed(KS8695_TMR_VA + KS8695_TMCON); - writel_relaxed(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - - /* enable watchdog mode */ - writel_relaxed((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); - - /* re-enable timer0 */ - writel_relaxed(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); -} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c54cd7ed90ba..658be9743484 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -106,7 +106,7 @@ config CPU_ARM922T help The ARM922T is a version of the ARM920T, but with smaller instruction and data caches. It is used in Altera's - Excalibur XA device family and Micrel's KS8695 Centaur. + Excalibur XA device family and the ARM Integrator. Say Y if you want support for the ARM922T processor. Otherwise, say N. |