diff options
Diffstat (limited to 'arch')
46 files changed, 35 insertions, 2817 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 792517c078c5..3b2102024906 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -448,7 +448,7 @@ config X86_X2APIC If you don't know what to do here, say N. config X86_MPPARSE - bool "Enable MPS table" if ACPI || SFI + bool "Enable MPS table" if ACPI default y depends on X86_LOCAL_APIC help @@ -607,7 +607,6 @@ config X86_INTEL_MID depends on PCI depends on X86_64 || (PCI_GOANY && X86_32) depends on X86_IO_APIC - select SFI select I2C select DW_APB_TIMER select APB_TIMER @@ -896,18 +895,6 @@ config HPET_EMULATE_RTC def_bool y depends on HPET_TIMER && (RTC_DRV_CMOS=m || RTC_DRV_CMOS=y) -config APB_TIMER - def_bool y if X86_INTEL_MID - prompt "Intel MID APB Timer Support" if X86_INTEL_MID - select DW_APB_TIMER - depends on X86_INTEL_MID && SFI - help - APB timer is the replacement for 8254, HPET on X86 MID platforms. - The APBT provides a stable time base on SMP - systems, unlike the TSC, but it is more expensive to access, - as it is off-chip. APB timers are always running regardless of CPU - C states, they are used as per CPU clockevent device when possible. - # Mark as expert because too many people got it wrong. # The code disables itself when not needed. config DMI @@ -2469,8 +2456,6 @@ source "kernel/power/Kconfig" source "drivers/acpi/Kconfig" -source "drivers/sfi/Kconfig" - config X86_APM_BOOT def_bool y depends on APM @@ -2657,7 +2642,7 @@ config PCI_DIRECT config PCI_MMCONFIG bool "Support mmconfig PCI config space access" if X86_64 default y - depends on PCI && (ACPI || SFI || JAILHOUSE_GUEST) + depends on PCI && (ACPI || JAILHOUSE_GUEST) depends on X86_64 || (PCI_GOANY || PCI_GOMMCONFIG) config PCI_OLPC diff --git a/arch/x86/include/asm/apb_timer.h b/arch/x86/include/asm/apb_timer.h deleted file mode 100644 index 87ce8e963215..000000000000 --- a/arch/x86/include/asm/apb_timer.h +++ /dev/null @@ -1,40 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * apb_timer.h: Driver for Langwell APB timer based on Synopsis DesignWare - * - * (C) Copyright 2009 Intel Corporation - * Author: Jacob Pan (jacob.jun.pan@intel.com) - * - * Note: - */ - -#ifndef ASM_X86_APBT_H -#define ASM_X86_APBT_H -#include <linux/sfi.h> - -#ifdef CONFIG_APB_TIMER - -/* default memory mapped register base */ -#define LNW_SCU_ADDR 0xFF100000 -#define LNW_EXT_TIMER_OFFSET 0x1B800 -#define APBT_DEFAULT_BASE (LNW_SCU_ADDR+LNW_EXT_TIMER_OFFSET) -#define LNW_EXT_TIMER_PGOFFSET 0x800 - -/* APBT clock speed range from PCLK to fabric base, 25-100MHz */ -#define APBT_MAX_FREQ 50000000 -#define APBT_MIN_FREQ 1000000 -#define APBT_MMAP_SIZE 1024 - -extern void apbt_time_init(void); -extern void apbt_setup_secondary_clock(void); - -extern struct sfi_timer_table_entry *sfi_get_mtmr(int hint); -extern void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr); -extern int sfi_mtimer_num; - -#else /* CONFIG_APB_TIMER */ - -static inline void apbt_time_init(void) { } - -#endif -#endif /* ASM_X86_APBT_H */ diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h index 9f1a0a987e5e..d0dcefb5cc59 100644 --- a/arch/x86/include/asm/fixmap.h +++ b/arch/x86/include/asm/fixmap.h @@ -108,9 +108,6 @@ enum fixed_addresses { #ifdef CONFIG_PARAVIRT_XXL FIX_PARAVIRT_BOOTMAP, #endif -#ifdef CONFIG_X86_INTEL_MID - FIX_LNW_VRTC, -#endif #ifdef CONFIG_ACPI_APEI_GHES /* Used for GHES mapping from assorted contexts */ diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index cf0e25f45422..c201083b34f6 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -1,15 +1,13 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * intel-mid.h: Intel MID specific setup code + * Intel MID specific setup code * - * (C) Copyright 2009 Intel Corporation + * (C) Copyright 2009, 2021 Intel Corporation */ #ifndef _ASM_X86_INTEL_MID_H #define _ASM_X86_INTEL_MID_H -#include <linux/sfi.h> #include <linux/pci.h> -#include <linux/platform_device.h> extern int intel_mid_pci_init(void); extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state); @@ -22,93 +20,18 @@ extern void intel_mid_pwr_power_off(void); extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev); -extern int get_gpio_by_name(const char *name); -extern int __init sfi_parse_mrtc(struct sfi_table_header *table); -extern int __init sfi_parse_mtmr(struct sfi_table_header *table); -extern int sfi_mrtc_num; -extern struct sfi_rtc_table_entry sfi_mrtc_array[]; - -/* - * Here defines the array of devices platform data that IAFW would export - * through SFI "DEVS" table, we use name and type to match the device and - * its platform data. - */ -struct devs_id { - char name[SFI_NAME_LEN + 1]; - u8 type; - u8 delay; - u8 msic; - void *(*get_platform_data)(void *info); -}; - -#define sfi_device(i) \ - static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ - __section(".x86_intel_mid_dev.init") = &i - -/** -* struct mid_sd_board_info - template for SD device creation -* @name: identifies the driver -* @bus_num: board-specific identifier for a given SD controller -* @max_clk: the maximum frequency device supports -* @platform_data: the particular data stored there is driver-specific -*/ -struct mid_sd_board_info { - char name[SFI_NAME_LEN]; - int bus_num; - unsigned short addr; - u32 max_clk; - void *platform_data; -}; - -/* - * Medfield is the follow-up of Moorestown, it combines two chip solution into - * one. Other than that it also added always-on and constant tsc and lapic - * timers. Medfield is the platform name, and the chip name is called Penwell - * we treat Medfield/Penwell as a variant of Moorestown. Penwell can be - * identified via MSRs. - */ -enum intel_mid_cpu_type { - /* 1 was Moorestown */ - INTEL_MID_CPU_CHIP_PENWELL = 2, - INTEL_MID_CPU_CHIP_CLOVERVIEW, - INTEL_MID_CPU_CHIP_TANGIER, -}; - -extern enum intel_mid_cpu_type __intel_mid_cpu_chip; - #ifdef CONFIG_X86_INTEL_MID -static inline enum intel_mid_cpu_type intel_mid_identify_cpu(void) -{ - return __intel_mid_cpu_chip; -} - -static inline bool intel_mid_has_msic(void) -{ - return (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_PENWELL); -} - extern void intel_scu_devices_create(void); extern void intel_scu_devices_destroy(void); #else /* !CONFIG_X86_INTEL_MID */ -#define intel_mid_identify_cpu() 0 -#define intel_mid_has_msic() 0 - static inline void intel_scu_devices_create(void) { } static inline void intel_scu_devices_destroy(void) { } #endif /* !CONFIG_X86_INTEL_MID */ -enum intel_mid_timer_options { - INTEL_MID_TIMER_DEFAULT, - INTEL_MID_TIMER_APBT_ONLY, - INTEL_MID_TIMER_LAPIC_APBT, -}; - -extern enum intel_mid_timer_options intel_mid_timer_options; - /* Bus Select SoC Fuse value */ #define BSEL_SOC_FUSE_MASK 0x7 /* FSB 133MHz */ @@ -118,16 +41,4 @@ extern enum intel_mid_timer_options intel_mid_timer_options; /* FSB 83MHz */ #define BSEL_SOC_FUSE_111 0x7 -#define SFI_MTMR_MAX_NUM 8 -#define SFI_MRTC_MAX 8 - -/* VRTC timer */ -#define MRST_VRTC_MAP_SZ 1024 -/* #define MRST_VRTC_PGOFFSET 0xc00 */ - -extern void intel_mid_rtc_init(void); - -/* The offset for the mapping of global gpio pin to irq */ -#define INTEL_MID_IRQ_OFFSET 0x100 - #endif /* _ASM_X86_INTEL_MID_H */ diff --git a/arch/x86/include/asm/intel_mid_vrtc.h b/arch/x86/include/asm/intel_mid_vrtc.h deleted file mode 100644 index 0b44b1abe4d9..000000000000 --- a/arch/x86/include/asm/intel_mid_vrtc.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _INTEL_MID_VRTC_H -#define _INTEL_MID_VRTC_H - -extern unsigned char vrtc_cmos_read(unsigned char reg); -extern void vrtc_cmos_write(unsigned char val, unsigned char reg); -extern void vrtc_get_time(struct timespec64 *now); -extern int vrtc_set_mmss(const struct timespec64 *now); - -#endif diff --git a/arch/x86/include/asm/intel_scu_ipc.h b/arch/x86/include/asm/intel_scu_ipc.h index 11d457af68c5..8537f597d20a 100644 --- a/arch/x86/include/asm/intel_scu_ipc.h +++ b/arch/x86/include/asm/intel_scu_ipc.h @@ -65,6 +65,4 @@ static inline int intel_scu_ipc_dev_command(struct intel_scu_ipc_dev *scu, int c inlen, out, outlen); } -#include <asm/intel_scu_ipc_legacy.h> - #endif diff --git a/arch/x86/include/asm/intel_scu_ipc_legacy.h b/arch/x86/include/asm/intel_scu_ipc_legacy.h deleted file mode 100644 index 4cf13fecb673..000000000000 --- a/arch/x86/include/asm/intel_scu_ipc_legacy.h +++ /dev/null @@ -1,91 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_X86_INTEL_SCU_IPC_LEGACY_H_ -#define _ASM_X86_INTEL_SCU_IPC_LEGACY_H_ - -#include <linux/notifier.h> - -#define IPCMSG_INDIRECT_READ 0x02 -#define IPCMSG_INDIRECT_WRITE 0x05 - -#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */ - -#define IPCMSG_WARM_RESET 0xF0 -#define IPCMSG_COLD_RESET 0xF1 -#define IPCMSG_SOFT_RESET 0xF2 -#define IPCMSG_COLD_BOOT 0xF3 - -#define IPCMSG_VRTC 0xFA /* Set vRTC device */ -/* Command id associated with message IPCMSG_VRTC */ -#define IPC_CMD_VRTC_SETTIME 1 /* Set time */ -#define IPC_CMD_VRTC_SETALARM 2 /* Set alarm */ - -/* Don't call these in new code - they will be removed eventually */ - -/* Read single register */ -static inline int intel_scu_ipc_ioread8(u16 addr, u8 *data) -{ - return intel_scu_ipc_dev_ioread8(NULL, addr, data); -} - -/* Read a vector */ -static inline int intel_scu_ipc_readv(u16 *addr, u8 *data, int len) -{ - return intel_scu_ipc_dev_readv(NULL, addr, data, len); -} - -/* Write single register */ -static inline int intel_scu_ipc_iowrite8(u16 addr, u8 data) -{ - return intel_scu_ipc_dev_iowrite8(NULL, addr, data); -} - -/* Write a vector */ -static inline int intel_scu_ipc_writev(u16 *addr, u8 *data, int len) -{ - return intel_scu_ipc_dev_writev(NULL, addr, data, len); -} - -/* Update single register based on the mask */ -static inline int intel_scu_ipc_update_register(u16 addr, u8 data, u8 mask) -{ - return intel_scu_ipc_dev_update(NULL, addr, data, mask); -} - -/* Issue commands to the SCU with or without data */ -static inline int intel_scu_ipc_simple_command(int cmd, int sub) -{ - return intel_scu_ipc_dev_simple_command(NULL, cmd, sub); -} - -static inline int intel_scu_ipc_command(int cmd, int sub, u32 *in, int inlen, - u32 *out, int outlen) -{ - /* New API takes both inlen and outlen as bytes so convert here */ - size_t inbytes = inlen * sizeof(u32); - size_t outbytes = outlen * sizeof(u32); - - return intel_scu_ipc_dev_command_with_size(NULL, cmd, sub, in, inbytes, - inlen, out, outbytes); -} - -extern struct blocking_notifier_head intel_scu_notifier; - -static inline void intel_scu_notifier_add(struct notifier_block *nb) -{ - blocking_notifier_chain_register(&intel_scu_notifier, nb); -} - -static inline void intel_scu_notifier_remove(struct notifier_block *nb) -{ - blocking_notifier_chain_unregister(&intel_scu_notifier, nb); -} - -static inline int intel_scu_notifier_post(unsigned long v, void *p) -{ - return blocking_notifier_call_chain(&intel_scu_notifier, v, p); -} - -#define SCU_AVAILABLE 1 -#define SCU_DOWN 2 - -#endif diff --git a/arch/x86/include/asm/platform_sst_audio.h b/arch/x86/include/asm/platform_sst_audio.h index 16b9f220bdeb..40f92270515b 100644 --- a/arch/x86/include/asm/platform_sst_audio.h +++ b/arch/x86/include/asm/platform_sst_audio.h @@ -10,8 +10,6 @@ #ifndef _PLATFORM_SST_AUDIO_H_ #define _PLATFORM_SST_AUDIO_H_ -#include <linux/sfi.h> - #define MAX_NUM_STREAMS_MRFLD 25 #define MAX_NUM_STREAMS MAX_NUM_STREAMS_MRFLD diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5eeb808eb024..2ddf08351f0b 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -116,7 +116,6 @@ obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_HPET_TIMER) += hpet.o -obj-$(CONFIG_APB_TIMER) += apb_timer.o obj-$(CONFIG_AMD_NB) += amd_nb.o obj-$(CONFIG_DEBUG_NMI_SELFTEST) += nmi_selftest.o diff --git a/arch/x86/kernel/apb_timer.c b/arch/x86/kernel/apb_timer.c deleted file mode 100644 index 263eeaddb0aa..000000000000 --- a/arch/x86/kernel/apb_timer.c +++ /dev/null @@ -1,347 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * apb_timer.c: Driver for Langwell APB timers - * - * (C) Copyright 2009 Intel Corporation - * Author: Jacob Pan (jacob.jun.pan@intel.com) - * - * Note: - * Langwell is the south complex of Intel Moorestown MID platform. There are - * eight external timers in total that can be used by the operating system. - * The timer information, such as frequency and addresses, is provided to the - * OS via SFI tables. - * Timer interrupts are routed via FW/HW emulated IOAPIC independently via - * individual redirection table entries (RTE). - * Unlike HPET, there is no master counter, therefore one of the timers are - * used as clocksource. The overall allocation looks like: - * - timer 0 - NR_CPUs for per cpu timer - * - one timer for clocksource - * - one timer for watchdog driver. - * It is also worth notice that APB timer does not support true one-shot mode, - * free-running mode will be used here to emulate one-shot mode. - * APB timer can also be used as broadcast timer along with per cpu local APIC - * timer, but by default APB timer has higher rating than local APIC timers. - */ - -#include <linux/delay.h> -#include <linux/dw_apb_timer.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/pm.h> -#include <linux/sfi.h> -#include <linux/interrupt.h> -#include <linux/cpu.h> -#include <linux/irq.h> - -#include <asm/fixmap.h> -#include <asm/apb_timer.h> -#include <asm/intel-mid.h> -#include <asm/time.h> - -#define APBT_CLOCKEVENT_RATING 110 -#define APBT_CLOCKSOURCE_RATING 250 - -#define APBT_CLOCKEVENT0_NUM (0) -#define APBT_CLOCKSOURCE_NUM (2) - -static phys_addr_t apbt_address; -static int apb_timer_block_enabled; -static void __iomem *apbt_virt_address; - -/* - * Common DW APB timer info - */ -static unsigned long apbt_freq; - -struct apbt_dev { - struct dw_apb_clock_event_device *timer; - unsigned int num; - int cpu; - unsigned int irq; - char name[10]; -}; - -static struct dw_apb_clocksource *clocksource_apbt; - -static inline void __iomem *adev_virt_addr(struct apbt_dev *adev) -{ - return apbt_virt_address + adev->num * APBTMRS_REG_SIZE; -} - -static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev); - -#ifdef CONFIG_SMP -static unsigned int apbt_num_timers_used; -#endif - -static inline void apbt_set_mapping(void) -{ - struct sfi_timer_table_entry *mtmr; - int phy_cs_timer_id = 0; - - if (apbt_virt_address) { - pr_debug("APBT base already mapped\n"); - return; - } - mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); - if (mtmr == NULL) { - printk(KERN_ERR "Failed to get MTMR %d from SFI\n", - APBT_CLOCKEVENT0_NUM); - return; - } - apbt_address = (phys_addr_t)mtmr->phys_addr; - if (!apbt_address) { - printk(KERN_WARNING "No timer base from SFI, use default\n"); - apbt_address = APBT_DEFAULT_BASE; - } - apbt_virt_address = ioremap(apbt_address, APBT_MMAP_SIZE); - if (!apbt_virt_address) { - pr_debug("Failed mapping APBT phy address at %lu\n",\ - (unsigned long)apbt_address); - goto panic_noapbt; - } - apbt_freq = mtmr->freq_hz; - sfi_free_mtmr(mtmr); - - /* Now figure out the physical timer id for clocksource device */ - mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM); - if (mtmr == NULL) - goto panic_noapbt; - - /* Now figure out the physical timer id */ - pr_debug("Use timer %d for clocksource\n", - (int)(mtmr->phys_addr & 0xff) / APBTMRS_REG_SIZE); - phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff) / - APBTMRS_REG_SIZE; - - clocksource_apbt = dw_apb_clocksource_init(APBT_CLOCKSOURCE_RATING, - "apbt0", apbt_virt_address + phy_cs_timer_id * - APBTMRS_REG_SIZE, apbt_freq); - return; - -panic_noapbt: - panic("Failed to setup APB system timer\n"); - -} - -static inline void apbt_clear_mapping(void) -{ - iounmap(apbt_virt_address); - apbt_virt_address = NULL; -} - -static int __init apbt_clockevent_register(void) -{ - struct sfi_timer_table_entry *mtmr; - struct apbt_dev *adev = this_cpu_ptr(&cpu_apbt_dev); - - mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM); - if (mtmr == NULL) { - printk(KERN_ERR "Failed to get MTMR %d from SFI\n", - APBT_CLOCKEVENT0_NUM); - return -ENODEV; - } - - adev->num = smp_processor_id(); - adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0", - intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ? - APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING, - adev_virt_addr(adev), 0, apbt_freq); - /* Firmware does EOI handling for us. */ - adev->timer->eoi = NULL; - - if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) { - global_clock_event = &adev->timer->ced; - printk(KERN_DEBUG "%s clockevent registered as global\n", - global_clock_event->name); - } - - dw_apb_clockevent_register(adev->timer); - - sfi_free_mtmr(mtmr); - return 0; -} - -#ifdef CONFIG_SMP - -static void apbt_setup_irq(struct apbt_dev *adev) -{ - irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT); - irq_set_affinity(adev->irq, cpumask_of(adev->cpu)); -} - -/* Should be called with per cpu */ -void apbt_setup_secondary_clock(void) -{ - struct apbt_dev *adev; - int cpu; - - /* Don't register boot CPU clockevent */ - cpu = smp_processor_id(); - if (!cpu) - return; - - adev = this_cpu_ptr(&cpu_apbt_dev); - if (!adev->timer) { - adev->timer = dw_apb_clockevent_init(cpu, adev->name, - APBT_CLOCKEVENT_RATING, adev_virt_addr(adev), - adev->irq, apbt_freq); - adev->timer->eoi = NULL; - } else { - dw_apb_clockevent_resume(adev->timer); - } - - printk(KERN_INFO "Registering CPU %d clockevent device %s, cpu %08x\n", - cpu, adev->name, adev->cpu); - - apbt_setup_irq(adev); - dw_apb_clockevent_register(adev->timer); - - return; -} - -/* - * this notify handler process CPU hotplug events. in case of S0i3, nonboot - * cpus are disabled/enabled frequently, for performance reasons, we keep the - * per cpu timer irq registered so that we do need to do free_irq/request_irq. - * - * TODO: it might be more reliable to directly disable percpu clockevent device - * without the notifier chain. currently, cpu 0 may get interrupts from other - * cpu timers during the offline process due to the ordering of notification. - * the extra interrupt is harmless. - */ -static int apbt_cpu_dead(unsigned int cpu) -{ - struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu); - - dw_apb_clockevent_pause(adev->timer); - if (system_state == SYSTEM_RUNNING) { - pr_debug("skipping APBT CPU %u offline\n", cpu); - } else { - pr_debug("APBT clockevent for cpu %u offline\n", cpu); - dw_apb_clockevent_stop(adev->timer); - } - return 0; -} - -static __init int apbt_late_init(void) -{ - if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT || - !apb_timer_block_enabled) - return 0; - return cpuhp_setup_state(CPUHP_X86_APB_DEAD, "x86/apb:dead", NULL, - apbt_cpu_dead); -} -fs_initcall(apbt_late_init); -#else - -void apbt_setup_secondary_clock(void) {} - -#endif /* CONFIG_SMP */ - -static int apbt_clocksource_register(void) -{ - u64 start, now; - u64 t1; - - /* Start the counter, use timer 2 as source, timer 0/1 for event */ - dw_apb_clocksource_start(clocksource_apbt); - - /* Verify whether apbt counter works */ - t1 = dw_apb_clocksource_read(clocksource_apbt); - start = rdtsc(); - - /* - * We don't know the TSC frequency yet, but waiting for - * 200000 TSC cycles is safe: - * 4 GHz == 50us - * 1 GHz == 200us - */ - do { - rep_nop(); - now = rdtsc(); - } while ((now - start) < 200000UL); - - /* APBT is the only always on clocksource, it has to work! */ - if (t1 == dw_apb_clocksource_read(clocksource_apbt)) - panic("APBT counter not counting. APBT disabled\n"); - - dw_apb_clocksource_register(clocksource_apbt); - - return 0; -} - -/* - * Early setup the APBT timer, only use timer 0 for booting then switch to - * per CPU timer if possible. - * returns 1 if per cpu apbt is setup - * returns 0 if no per cpu apbt is chosen - * panic if set up failed, this is the only platform timer on Moorestown. - */ -void __init apbt_time_init(void) -{ -#ifdef CONFIG_SMP - int i; - struct sfi_timer_table_entry *p_mtmr; - struct apbt_dev *adev; -#endif - - if (apb_timer_block_enabled) - return; - apbt_set_mapping(); - if (!apbt_virt_address) - goto out_noapbt; - /* - * Read the frequency and check for a sane value, for ESL model - * we extend the possible clock range to allow time scaling. - */ - - if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) { - pr_debug("APBT has invalid freq 0x%lx\n", apbt_freq); - goto out_noapbt; - } - if (apbt_clocksource_register()) { - pr_debug("APBT has failed to register clocksource\n"); - goto out_noapbt; - } - if (!apbt_clockevent_register()) - apb_timer_block_enabled = 1; - else { - pr_debug("APBT has failed to register clockevent\n"); - goto out_noapbt; - } -#ifdef CONFIG_SMP - /* kernel cmdline disable apb timer, so we will use lapic timers */ - if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) { - printk(KERN_INFO "apbt: disabled per cpu timer\n"); - return; - } - pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus()); - if (num_possible_cpus() <= sfi_mtimer_num) - apbt_num_timers_used = num_possible_cpus(); - else - apbt_num_timers_used = 1; - pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used); - - /* here we set up per CPU timer data structure */ - for (i = 0; i < apbt_num_timers_used; i++) { - adev = &per_cpu(cpu_apbt_dev, i); - adev->num = i; - adev->cpu = i; - p_mtmr = sfi_get_mtmr(i); - if (p_mtmr) - adev->irq = p_mtmr->irq; - else - printk(KERN_ERR "Failed to get timer for cpu %d\n", i); - snprintf(adev->name, sizeof(adev->name) - 1, "apbt%d", i); - } -#endif - - return; - -out_noapbt: - apbt_clear_mapping(); - apb_timer_block_enabled = 0; - panic("failed to enable APB timer\n"); -} diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index e4ab4804b20d..c3b60c37c728 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -198,7 +198,7 @@ static int __init parse_noapic(char *str) } early_param("noapic", parse_noapic); -/* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ +/* Will be called in mpparse/ACPI codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) { int i; @@ -2863,7 +2863,7 @@ int mp_register_ioapic(int id, u32 address, u32 gsi_base, /* * If mp_register_ioapic() is called during early boot stage when - * walking ACPI/SFI/DT tables, it's too early to create irqdomain, + * walking ACPI/DT tables, it's too early to create irqdomain, * we are still using bootmem allocator. So delay it to setup_IO_APIC(). */ if (hotplug) { diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 740f3bdb3f61..d883176ef2ce 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -16,7 +16,6 @@ #include <linux/memblock.h> #include <linux/pci.h> #include <linux/root_dev.h> -#include <linux/sfi.h> #include <linux/hugetlb.h> #include <linux/tboot.h> #include <linux/usb/xhci-dbgp.h> @@ -1185,7 +1184,6 @@ void __init setup_arch(char **cmdline_p) * Read APIC and some other early information from ACPI tables. */ acpi_boot_init(); - sfi_init(); x86_dtb_init(); /* diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index 95e2e6bd8d8c..8edd62206604 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -28,10 +28,12 @@ #include <linux/io.h> #include <linux/smp.h> +#include <asm/cpu_device_id.h> #include <asm/segment.h> #include <asm/pci_x86.h> #include <asm/hw_irq.h> #include <asm/io_apic.h> +#include <asm/intel-family.h> #include <asm/intel-mid.h> #include <asm/acpi.h> @@ -140,6 +142,7 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, * type1_access_ok - check whether to use type 1 * @bus: bus number * @devfn: device & function in question + * @reg: configuration register offset * * If the bus is on a Lincroft chip and it exists, or is not on a Lincroft at * all, the we can go ahead with any reads & writes. If it's on a Lincroft, @@ -212,10 +215,17 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, where, size, value); } +static const struct x86_cpu_id intel_mid_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, NULL), + {} +}; + static int intel_mid_pci_irq_enable(struct pci_dev *dev) { + const struct x86_cpu_id *id; struct irq_alloc_info info; bool polarity_low; + u16 model = 0; int ret; u8 gsi; @@ -228,8 +238,12 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev) return ret; } - switch (intel_mid_identify_cpu()) { - case INTEL_MID_CPU_CHIP_TANGIER: + id = x86_match_cpu(intel_mid_cpu_ids); + if (id) + model = id->model; + + switch (model) { + case INTEL_FAM6_ATOM_SILVERMONT_MID: polarity_low = false; /* Special treatment for IRQ0 */ diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 234998f196d4..de6bf0e7e8f8 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -11,9 +11,9 @@ * themselves. */ +#include <linux/acpi.h> #include <linux/pci.h> #include <linux/init.h> -#include <linux/sfi_acpi.h> #include <linux/bitmap.h> #include <linux/dmi.h> #include <linux/slab.h> @@ -665,7 +665,7 @@ void __init pci_mmcfg_early_init(void) if (pci_mmcfg_check_hostbridge()) known_bridge = 1; else - acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); __pci_mmcfg_init(1); set_apei_filter(); @@ -683,7 +683,7 @@ void __init pci_mmcfg_late_init(void) /* MMCONFIG hasn't been enabled yet, try again */ if (pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF) { - acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); + acpi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); __pci_mmcfg_init(0); } } diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile index b2f90a1a89f1..3ed03a2552d0 100644 --- a/arch/x86/platform/Makefile +++ b/arch/x86/platform/Makefile @@ -10,6 +10,5 @@ obj-y += intel-mid/ obj-y += intel-quark/ obj-y += olpc/ obj-y += scx200/ -obj-y += sfi/ obj-y += ts5500/ obj-y += uv/ diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile index cc2549f0ccb1..ddfc08783fb8 100644 --- a/arch/x86/platform/intel-mid/Makefile +++ b/arch/x86/platform/intel-mid/Makefile @@ -1,7 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o pwr.o - -# SFI specific code -ifdef CONFIG_X86_INTEL_MID -obj-$(CONFIG_SFI) += sfi.o device_libs/ -endif +obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o pwr.o diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile deleted file mode 100644 index 918edac9ab9a..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ /dev/null @@ -1,32 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# Family-Level Interface Shim (FLIS) -obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o -# SDHCI Devices -obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += platform_mrfld_sd.o -# WiFi + BT -obj-$(subst m,y,$(CONFIG_BRCMFMAC_SDIO)) += platform_bcm43xx.o -obj-$(subst m,y,$(CONFIG_BT_HCIUART_BCM)) += platform_bt.o -# IPC Devices -obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o -obj-$(subst m,y,$(CONFIG_SND_MFLD_MACHINE)) += platform_msic_audio.o -obj-$(subst m,y,$(CONFIG_GPIO_MSIC)) += platform_msic_gpio.o -obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_ocd.o -obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o -obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o -obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o -# SPI Devices -obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_mrfld_spidev.o -# I2C Devices -obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o -obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o -obj-$(subst m,y,$(CONFIG_MPU3050_I2C)) += platform_mpu3050.o -obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o -obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o -# I2C GPIO Expanders -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o -# MISC Devices -obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o -obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_mrfld_power_btn.o -obj-$(subst m,y,$(CONFIG_RTC_DRV_CMOS)) += platform_mrfld_rtc.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c deleted file mode 100644 index 564c47c53f3a..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c +++ /dev/null @@ -1,101 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_bcm43xx.c: bcm43xx platform data initialization file - * - * (C) Copyright 2016 Intel Corporation - * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - */ - -#include <linux/gpio/machine.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/sfi.h> - -#include <asm/intel-mid.h> - -#define WLAN_SFI_GPIO_IRQ_NAME "WLAN-interrupt" -#define WLAN_SFI_GPIO_ENABLE_NAME "WLAN-enable" - -#define WLAN_DEV_NAME "0000:00:01.3" - -static struct regulator_consumer_supply bcm43xx_vmmc_supply = { - .dev_name = WLAN_DEV_NAME, - .supply = "vmmc", -}; - -static struct regulator_init_data bcm43xx_vmmc_data = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &bcm43xx_vmmc_supply, -}; - -static struct fixed_voltage_config bcm43xx_vmmc = { - .supply_name = "bcm43xx-vmmc-regulator", - /* - * Announce 2.0V here to be compatible with SDIO specification. The - * real voltage and signaling are still 1.8V. - */ - .microvolts = 2000000, /* 1.8V */ - .startup_delay = 250 * 1000, /* 250ms */ - .enabled_at_boot = 0, /* disabled at boot */ - .init_data = &bcm43xx_vmmc_data, -}; - -static struct platform_device bcm43xx_vmmc_regulator = { - .name = "reg-fixed-voltage", - .id = PLATFORM_DEVID_AUTO, - .dev = { - .platform_data = &bcm43xx_vmmc, - }, -}; - -static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = { - .dev_id = "reg-fixed-voltage.0", - .table = { - GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW), - {} - }, -}; - -static int __init bcm43xx_regulator_register(void) -{ - struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table; - struct gpiod_lookup *lookup = table->table; - int ret; - - lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME); - gpiod_add_lookup_table(table); - - ret = platform_device_register(&bcm43xx_vmmc_regulator); - if (ret) { - pr_err("%s: vmmc regulator register failed\n", __func__); - return ret; - } - - return 0; -} - -static void __init *bcm43xx_platform_data(void *info) -{ - int ret; - - ret = bcm43xx_regulator_register(); - if (ret) - return NULL; - - pr_info("Using generic wifi platform data\n"); - - /* For now it's empty */ - return NULL; -} - -static const struct devs_id bcm43xx_clk_vmmc_dev_id __initconst = { - .name = "bcm43xx_clk_vmmc", - .type = SFI_DEV_TYPE_SD, - .get_platform_data = &bcm43xx_platform_data, -}; - -sfi_device(bcm43xx_clk_vmmc_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c b/arch/x86/platform/intel-mid/device_libs/platform_bma023.c deleted file mode 100644 index 32912a17f68e..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_bma023.c +++ /dev/null @@ -1,16 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_bma023.c: bma023 platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - */ - -#include <asm/intel-mid.h> - -static const struct devs_id bma023_dev_id __initconst = { - .name = "bma023", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, -}; - -sfi_device(bma023_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bt.c b/arch/x86/platform/intel-mid/device_libs/platform_bt.c deleted file mode 100644 index 2930b6e9473e..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_bt.c +++ /dev/null @@ -1,101 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Bluetooth platform data initialization file - * - * (C) Copyright 2017 Intel Corporation - * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - */ - -#include <linux/gpio/machine.h> -#include <linux/pci.h> -#include <linux/platform_device.h> - -#include <asm/cpu_device_id.h> -#include <asm/intel-family.h> -#include <asm/intel-mid.h> - -struct bt_sfi_data { - struct device *dev; - const char *name; - int (*setup)(struct bt_sfi_data *ddata); -}; - -static struct gpiod_lookup_table tng_bt_sfi_gpio_table = { - .dev_id = "hci_bcm", - .table = { - GPIO_LOOKUP("0000:00:0c.0", -1, "device-wakeup", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("0000:00:0c.0", -1, "shutdown", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("0000:00:0c.0", -1, "host-wakeup", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -#define TNG_BT_SFI_GPIO_DEVICE_WAKEUP "bt_wakeup" -#define TNG_BT_SFI_GPIO_SHUTDOWN "BT-reset" -#define TNG_BT_SFI_GPIO_HOST_WAKEUP "bt_uart_enable" - -static int __init tng_bt_sfi_setup(struct bt_sfi_data *ddata) -{ - struct gpiod_lookup_table *table = &tng_bt_sfi_gpio_table; - struct gpiod_lookup *lookup = table->table; - struct pci_dev *pdev; - - /* Connected to /dev/ttyS0 */ - pdev = pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(4, 1)); - if (!pdev) - return -ENODEV; - - ddata->dev = &pdev->dev; - ddata->name = table->dev_id; - - lookup[0].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_DEVICE_WAKEUP); - lookup[1].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_SHUTDOWN); - lookup[2].chip_hwnum = get_gpio_by_name(TNG_BT_SFI_GPIO_HOST_WAKEUP); - - gpiod_add_lookup_table(table); - return 0; -} - -static struct bt_sfi_data tng_bt_sfi_data __initdata = { - .setup = tng_bt_sfi_setup, -}; - -static const struct x86_cpu_id bt_sfi_cpu_ids[] = { - X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_MID, &tng_bt_sfi_data), - {} -}; - -static int __init bt_sfi_init(void) -{ - struct platform_device_info info; - struct platform_device *pdev; - const struct x86_cpu_id *id; - struct bt_sfi_data *ddata; - int ret; - - id = x86_match_cpu(bt_sfi_cpu_ids); - if (!id) - return -ENODEV; - - ddata = (struct bt_sfi_data *)id->driver_data; - if (!ddata) - return -ENODEV; - - ret = ddata->setup(ddata); - if (ret) - return ret; - - memset(&info, 0, sizeof(info)); - info.fwnode = ddata->dev->fwnode; - info.parent = ddata->dev; - info.name = ddata->name; - info.id = PLATFORM_DEVID_NONE; - - pdev = platform_device_register_full(&info); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - dev_info(ddata->dev, "Registered Bluetooth device: %s\n", ddata->name); - return 0; -} -device_initcall(bt_sfi_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c b/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c deleted file mode 100644 index a2508582a0b1..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_emc1403.c +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_emc1403.c: emc1403 platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <asm/intel-mid.h> - -static void __init *emc1403_platform_data(void *info) -{ - static short intr2nd_pdata; - struct i2c_board_info *i2c_info = info; - int intr = get_gpio_by_name("thermal_int"); - int intr2nd = get_gpio_by_name("thermal_alert"); - - if (intr < 0) - return NULL; - if (intr2nd < 0) - return NULL; - - i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; - intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET; - - return &intr2nd_pdata; -} - -static const struct devs_id emc1403_dev_id __initconst = { - .name = "emc1403", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &emc1403_platform_data, -}; - -sfi_device(emc1403_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c b/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c deleted file mode 100644 index d9435d2196a4..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_gpio_keys.c +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_gpio_keys.c: gpio_keys platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/input.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/platform_device.h> -#include <asm/intel-mid.h> - -#define DEVICE_NAME "gpio-keys" - -/* - * we will search these buttons in SFI GPIO table (by name) - * and register them dynamically. Please add all possible - * buttons here, we will shrink them if no GPIO found. - */ -static struct gpio_keys_button gpio_button[] = { - {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000}, - {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20}, - {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20}, - {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20}, - {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20}, - {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20}, - {KEY_MUTE, -1, 1, "mute_enable", EV_KEY, 0, 20}, - {KEY_VOLUMEUP, -1, 1, "volume_up", EV_KEY, 0, 20}, - {KEY_VOLUMEDOWN, -1, 1, "volume_down", EV_KEY, 0, 20}, - {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20}, - {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20}, - {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20}, - {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20}, -}; - -static struct gpio_keys_platform_data gpio_keys = { - .buttons = gpio_button, - .rep = 1, - .nbuttons = -1, /* will fill it after search */ -}; - -static struct platform_device pb_device = { - .name = DEVICE_NAME, - .id = -1, - .dev = { - .platform_data = &gpio_keys, - }, -}; - -/* - * Shrink the non-existent buttons, register the gpio button - * device if there is some - */ -static int __init pb_keys_init(void) -{ - struct gpio_keys_button *gb = gpio_button; - int i, good = 0; - - for (i = 0; i < ARRAY_SIZE(gpio_button); i++) { - gb[i].gpio = get_gpio_by_name(gb[i].desc); - pr_debug("info[%2d]: name = %s, gpio = %d\n", i, gb[i].desc, - gb[i].gpio); - if (gb[i].gpio < 0) - continue; - - if (i != good) - gb[good] = gb[i]; - good++; - } - - if (good) { - gpio_keys.nbuttons = good; - return platform_device_register(&pb_device); - } - return 0; -} -late_initcall(pb_keys_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c b/arch/x86/platform/intel-mid/device_libs/platform_lis331.c deleted file mode 100644 index a4485cd638c6..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_lis331.c +++ /dev/null @@ -1,37 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_lis331.c: lis331 platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <asm/intel-mid.h> - -static void __init *lis331dl_platform_data(void *info) -{ - static short intr2nd_pdata; - struct i2c_board_info *i2c_info = info; - int intr = get_gpio_by_name("accel_int"); - int intr2nd = get_gpio_by_name("accel_2"); - - if (intr < 0) - return NULL; - if (intr2nd < 0) - return NULL; - - i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; - intr2nd_pdata = intr2nd + INTEL_MID_IRQ_OFFSET; - - return &intr2nd_pdata; -} - -static const struct devs_id lis331dl_dev_id __initconst = { - .name = "i2c_accel", - .type = SFI_DEV_TYPE_I2C, - .get_platform_data = &lis331dl_platform_data, -}; - -sfi_device(lis331dl_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c b/arch/x86/platform/intel-mid/device_libs/platform_max7315.c deleted file mode 100644 index e9287c3184da..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_max7315.c +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_max7315.c: max7315 platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <asm/intel-mid.h> - -#define MAX7315_NUM 2 - -static void __init *max7315_platform_data(void *info) -{ - static struct pca953x_platform_data max7315_pdata[MAX7315_NUM]; - static int nr; - struct pca953x_platform_data *max7315 = &max7315_pdata[nr]; - struct i2c_board_info *i2c_info = info; - int gpio_base, intr; - char base_pin_name[SFI_NAME_LEN + 1]; - char intr_pin_name[SFI_NAME_LEN + 1]; - - if (nr == MAX7315_NUM) { - pr_err("too many max7315s, we only support %d\n", - MAX7315_NUM); - return NULL; - } - /* we have several max7315 on the board, we only need load several - * instances of the same pca953x driver to cover them - */ - strcpy(i2c_info->type, "max7315"); - if (nr++) { - snprintf(base_pin_name, sizeof(base_pin_name), - "max7315_%d_base", nr); - snprintf(intr_pin_name, sizeof(intr_pin_name), - "max7315_%d_int", nr); - } else { - strcpy(base_pin_name, "max7315_base"); - strcpy(intr_pin_name, "max7315_int"); - } - - gpio_base = get_gpio_by_name(base_pin_name); - intr = get_gpio_by_name(intr_pin_name); - - if (gpio_base < 0) - return NULL; - max7315->gpio_base = gpio_base; - if (intr != -1) { - i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; - max7315->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; - } else { - i2c_info->irq = -1; - max7315->irq_base = -1; - } - return max7315; -} - -static const struct devs_id max7315_dev_id __initconst = { - .name = "i2c_max7315", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &max7315_platform_data, -}; - -static const struct devs_id max7315_2_dev_id __initconst = { - .name = "i2c_max7315_2", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &max7315_platform_data, -}; - -sfi_device(max7315_dev_id); -sfi_device(max7315_2_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c b/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c deleted file mode 100644 index 28a182713934..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_mpu3050.c +++ /dev/null @@ -1,32 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_mpu3050.c: mpu3050 platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/gpio.h> -#include <linux/i2c.h> -#include <asm/intel-mid.h> - -static void *mpu3050_platform_data(void *info) -{ - struct i2c_board_info *i2c_info = info; - int intr = get_gpio_by_name("mpu3050_int"); - - if (intr < 0) - return NULL; - - i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; - return NULL; -} - -static const struct devs_id mpu3050_dev_id __initconst = { - .name = "mpu3050", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &mpu3050_platform_data, -}; - -sfi_device(mpu3050_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c deleted file mode 100644 index 605e1f94ad89..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Merrifield FLIS platform device initialization file - * - * Copyright (C) 2016, Intel Corporation - * - * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - */ - -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> - -#include <asm/intel-mid.h> - -#define FLIS_BASE_ADDR 0xff0c0000 -#define FLIS_LENGTH 0x8000 - -static struct resource mrfld_pinctrl_mmio_resource = { - .start = FLIS_BASE_ADDR, - .end = FLIS_BASE_ADDR + FLIS_LENGTH - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mrfld_pinctrl_device = { - .name = "pinctrl-merrifield", - .id = PLATFORM_DEVID_NONE, - .resource = &mrfld_pinctrl_mmio_resource, - .num_resources = 1, -}; - -static int __init mrfld_pinctrl_init(void) -{ - if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER) - return platform_device_register(&mrfld_pinctrl_device); - - return -ENODEV; -} -arch_initcall(mrfld_pinctrl_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c deleted file mode 100644 index ec2afb41b34a..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_power_btn.c +++ /dev/null @@ -1,78 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Merrifield power button support - * - * (C) Copyright 2017 Intel Corporation - * - * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - */ - -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/platform_device.h> -#include <linux/sfi.h> - -#include <asm/intel-mid.h> -#include <asm/intel_scu_ipc.h> - -static struct resource mrfld_power_btn_resources[] = { - { - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mrfld_power_btn_dev = { - .name = "msic_power_btn", - .id = PLATFORM_DEVID_NONE, - .num_resources = ARRAY_SIZE(mrfld_power_btn_resources), - .resource = mrfld_power_btn_resources, -}; - -static int mrfld_power_btn_scu_status_change(struct notifier_block *nb, - unsigned long code, void *data) -{ - if (code == SCU_DOWN) { - platform_device_unregister(&mrfld_power_btn_dev); - return 0; - } - - return platform_device_register(&mrfld_power_btn_dev); -} - -static struct notifier_block mrfld_power_btn_scu_notifier = { - .notifier_call = mrfld_power_btn_scu_status_change, -}; - -static int __init register_mrfld_power_btn(void) -{ - if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER) - return -ENODEV; - - /* - * We need to be sure that the SCU IPC is ready before - * PMIC power button device can be registered: - */ - intel_scu_notifier_add(&mrfld_power_btn_scu_notifier); - - return 0; -} -arch_initcall(register_mrfld_power_btn); - -static void __init *mrfld_power_btn_platform_data(void *info) -{ - struct resource *res = mrfld_power_btn_resources; - struct sfi_device_table_entry *pentry = info; - - res->start = res->end = pentry->irq; - return NULL; -} - -static const struct devs_id mrfld_power_btn_dev_id __initconst = { - .name = "bcove_power_btn", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &mrfld_power_btn_platform_data, -}; - -sfi_device(mrfld_power_btn_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c deleted file mode 100644 index 40e9808a9634..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_rtc.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Merrifield legacy RTC initialization file - * - * (C) Copyright 2017 Intel Corporation - * - * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - */ - -#include <linux/init.h> - -#include <asm/hw_irq.h> -#include <asm/intel-mid.h> -#include <asm/io_apic.h> -#include <asm/time.h> -#include <asm/x86_init.h> - -static int __init mrfld_legacy_rtc_alloc_irq(void) -{ - struct irq_alloc_info info; - int ret; - - if (!x86_platform.legacy.rtc) - return -ENODEV; - - ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, 0); - ret = mp_map_gsi_to_irq(RTC_IRQ, IOAPIC_MAP_ALLOC, &info); - if (ret < 0) { - pr_info("Failed to allocate RTC interrupt. Disabling RTC\n"); - x86_platform.legacy.rtc = 0; - return ret; - } - - return 0; -} - -static int __init mrfld_legacy_rtc_init(void) -{ - if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER) - return -ENODEV; - - return mrfld_legacy_rtc_alloc_irq(); -} -arch_initcall(mrfld_legacy_rtc_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c deleted file mode 100644 index fe3b7ff975f3..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_sd.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * SDHCI platform data initilisation file - * - * (C) Copyright 2016 Intel Corporation - * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - */ - -#include <linux/init.h> -#include <linux/pci.h> - -#include <linux/mmc/sdhci-pci-data.h> - -#include <asm/intel-mid.h> - -#define INTEL_MRFLD_SD 2 -#define INTEL_MRFLD_SD_CD_GPIO 77 - -static struct sdhci_pci_data mrfld_sdhci_pci_data = { - .rst_n_gpio = -EINVAL, - .cd_gpio = INTEL_MRFLD_SD_CD_GPIO, -}; - -static struct sdhci_pci_data * -mrfld_sdhci_pci_get_data(struct pci_dev *pdev, int slotno) -{ - unsigned int func = PCI_FUNC(pdev->devfn); - - if (func == INTEL_MRFLD_SD) - return &mrfld_sdhci_pci_data; - - return NULL; -} - -static int __init mrfld_sd_init(void) -{ - if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER) - return -ENODEV; - - sdhci_pci_get_data = mrfld_sdhci_pci_get_data; - return 0; -} -arch_initcall(mrfld_sd_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c deleted file mode 100644 index b828f4fd40be..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_spidev.c +++ /dev/null @@ -1,50 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * spidev platform data initialization file - * - * (C) Copyright 2014, 2016 Intel Corporation - * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - * Dan O'Donovan <dan@emutex.com> - */ - -#include <linux/err.h> -#include <linux/init.h> -#include <linux/sfi.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/spi/spi.h> - -#include <asm/intel-mid.h> - -#define MRFLD_SPI_DEFAULT_DMA_BURST 8 -#define MRFLD_SPI_DEFAULT_TIMEOUT 500 - -/* GPIO pin for spidev chipselect */ -#define MRFLD_SPIDEV_GPIO_CS 111 - -static struct pxa2xx_spi_chip spidev_spi_chip = { - .dma_burst_size = MRFLD_SPI_DEFAULT_DMA_BURST, - .timeout = MRFLD_SPI_DEFAULT_TIMEOUT, - .gpio_cs = MRFLD_SPIDEV_GPIO_CS, -}; - -static void __init *spidev_platform_data(void *info) -{ - struct spi_board_info *spi_info = info; - - if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER) - return ERR_PTR(-ENODEV); - - spi_info->mode = SPI_MODE_0; - spi_info->controller_data = &spidev_spi_chip; - - return NULL; -} - -static const struct devs_id spidev_dev_id __initconst = { - .name = "spidev", - .type = SFI_DEV_TYPE_SPI, - .delay = 0, - .get_platform_data = &spidev_platform_data, -}; - -sfi_device(spidev_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.c b/arch/x86/platform/intel-mid/device_libs/platform_msic.c deleted file mode 100644 index b17783d0d4e7..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic.c +++ /dev/null @@ -1,83 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic.c: MSIC platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/init.h> -#include <linux/sfi.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel_scu_ipc.h> -#include <asm/intel-mid.h> -#include "platform_msic.h" - -struct intel_msic_platform_data msic_pdata; - -static struct resource msic_resources[] = { - { - .start = INTEL_MSIC_IRQ_PHYS_BASE, - .end = INTEL_MSIC_IRQ_PHYS_BASE + 64 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device msic_device = { - .name = "intel_msic", - .id = -1, - .dev = { - .platform_data = &msic_pdata, - }, - .num_resources = ARRAY_SIZE(msic_resources), - .resource = msic_resources, -}; - -static int msic_scu_status_change(struct notifier_block *nb, - unsigned long code, void *data) -{ - if (code == SCU_DOWN) { - platform_device_unregister(&msic_device); - return 0; - } - - return platform_device_register(&msic_device); -} - -static int __init msic_init(void) -{ - static struct notifier_block msic_scu_notifier = { - .notifier_call = msic_scu_status_change, - }; - - /* - * We need to be sure that the SCU IPC is ready before MSIC device - * can be registered. - */ - if (intel_mid_has_msic()) - intel_scu_notifier_add(&msic_scu_notifier); - - return 0; -} -arch_initcall(msic_init); - -/* - * msic_generic_platform_data - sets generic platform data for the block - * @info: pointer to the SFI device table entry for this block - * @block: MSIC block - * - * Function sets IRQ number from the SFI table entry for given device to - * the MSIC platform data. - */ -void *msic_generic_platform_data(void *info, enum intel_msic_block block) -{ - struct sfi_device_table_entry *entry = info; - - BUG_ON(block < 0 || block >= INTEL_MSIC_BLOCK_LAST); - msic_pdata.irq[block] = entry->irq; - - return NULL; -} diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic.h b/arch/x86/platform/intel-mid/device_libs/platform_msic.h deleted file mode 100644 index 91deb2e65b0e..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * platform_msic.h: MSIC platform data header file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ -#ifndef _PLATFORM_MSIC_H_ -#define _PLATFORM_MSIC_H_ - -extern struct intel_msic_platform_data msic_pdata; - -void *msic_generic_platform_data(void *info, enum intel_msic_block block); - -#endif diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c deleted file mode 100644 index e765da78ad8c..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic_audio.c +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic_audio.c: MSIC audio platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/init.h> -#include <linux/sfi.h> -#include <linux/platform_device.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel-mid.h> - -#include "platform_msic.h" - -static void *msic_audio_platform_data(void *info) -{ - struct platform_device *pdev; - - pdev = platform_device_register_simple("sst-platform", -1, NULL, 0); - - if (IS_ERR(pdev)) { - pr_err("failed to create audio platform device\n"); - return NULL; - } - - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_AUDIO); -} - -static const struct devs_id msic_audio_dev_id __initconst = { - .name = "msic_audio", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &msic_audio_platform_data, -}; - -sfi_device(msic_audio_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c deleted file mode 100644 index f461f84903f8..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic_battery.c +++ /dev/null @@ -1,32 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic_battery.c: MSIC battery platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/init.h> -#include <linux/sfi.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel-mid.h> - -#include "platform_msic.h" - -static void __init *msic_battery_platform_data(void *info) -{ - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_BATTERY); -} - -static const struct devs_id msic_battery_dev_id __initconst = { - .name = "msic_battery", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &msic_battery_platform_data, -}; - -sfi_device(msic_battery_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c deleted file mode 100644 index 71a7d6db3878..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic_gpio.c +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic_gpio.c: MSIC GPIO platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/sfi.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel-mid.h> - -#include "platform_msic.h" - -static void __init *msic_gpio_platform_data(void *info) -{ - static struct intel_msic_gpio_pdata msic_gpio_pdata; - - int gpio = get_gpio_by_name("msic_gpio_base"); - - if (gpio < 0) - return NULL; - - msic_gpio_pdata.gpio_base = gpio; - msic_pdata.gpio = &msic_gpio_pdata; - - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_GPIO); -} - -static const struct devs_id msic_gpio_dev_id __initconst = { - .name = "msic_gpio", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &msic_gpio_platform_data, -}; - -sfi_device(msic_gpio_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c deleted file mode 100644 index 558c0d974430..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic_ocd.c +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic_ocd.c: MSIC OCD platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/sfi.h> -#include <linux/init.h> -#include <linux/gpio.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel-mid.h> - -#include "platform_msic.h" - -static void __init *msic_ocd_platform_data(void *info) -{ - static struct intel_msic_ocd_pdata msic_ocd_pdata; - int gpio; - - gpio = get_gpio_by_name("ocd_gpio"); - - if (gpio < 0) - return NULL; - - msic_ocd_pdata.gpio = gpio; - msic_pdata.ocd = &msic_ocd_pdata; - - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_OCD); -} - -static const struct devs_id msic_ocd_dev_id __initconst = { - .name = "msic_ocd", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &msic_ocd_platform_data, -}; - -sfi_device(msic_ocd_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c deleted file mode 100644 index 3d3de2d59726..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic_power_btn.c +++ /dev/null @@ -1,31 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic_power_btn.c: MSIC power btn platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/sfi.h> -#include <linux/init.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel-mid.h> - -#include "platform_msic.h" - -static void __init *msic_power_btn_platform_data(void *info) -{ - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_POWER_BTN); -} - -static const struct devs_id msic_power_btn_dev_id __initconst = { - .name = "msic_power_btn", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &msic_power_btn_platform_data, -}; - -sfi_device(msic_power_btn_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c b/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c deleted file mode 100644 index 4858da1d78c6..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_msic_thermal.c +++ /dev/null @@ -1,32 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_msic_thermal.c: msic_thermal platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/input.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> -#include <linux/mfd/intel_msic.h> -#include <asm/intel-mid.h> - -#include "platform_msic.h" - -static void __init *msic_thermal_platform_data(void *info) -{ - return msic_generic_platform_data(info, INTEL_MSIC_BLOCK_THERMAL); -} - -static const struct devs_id msic_thermal_dev_id __initconst = { - .name = "msic_thermal", - .type = SFI_DEV_TYPE_IPC, - .delay = 1, - .msic = 1, - .get_platform_data = &msic_thermal_platform_data, -}; - -sfi_device(msic_thermal_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c b/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c deleted file mode 100644 index 5609d8da3978..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c +++ /dev/null @@ -1,95 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * PCAL9555a platform data initialization file - * - * Copyright (C) 2016, Intel Corporation - * - * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com> - * Dan O'Donovan <dan@emutex.com> - */ - -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/i2c.h> -#include <linux/platform_data/pca953x.h> -#include <linux/sfi.h> - -#include <asm/intel-mid.h> - -#define PCAL9555A_NUM 4 - -static struct pca953x_platform_data pcal9555a_pdata[PCAL9555A_NUM]; -static int nr; - -static void __init *pcal9555a_platform_data(void *info) -{ - struct i2c_board_info *i2c_info = info; - char *type = i2c_info->type; - struct pca953x_platform_data *pcal9555a; - char base_pin_name[SFI_NAME_LEN + 1]; - char intr_pin_name[SFI_NAME_LEN + 1]; - int gpio_base, intr; - - snprintf(base_pin_name, sizeof(base_pin_name), "%s_base", type); - snprintf(intr_pin_name, sizeof(intr_pin_name), "%s_int", type); - - gpio_base = get_gpio_by_name(base_pin_name); - intr = get_gpio_by_name(intr_pin_name); - - /* Check if the SFI record valid */ - if (gpio_base == -1) - return NULL; - - if (nr >= PCAL9555A_NUM) { - pr_err("%s: Too many instances, only %d supported\n", __func__, - PCAL9555A_NUM); - return NULL; - } - - pcal9555a = &pcal9555a_pdata[nr++]; - pcal9555a->gpio_base = gpio_base; - - if (intr >= 0) { - i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; - pcal9555a->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; - } else { - i2c_info->irq = -1; - pcal9555a->irq_base = -1; - } - - strcpy(type, "pcal9555a"); - return pcal9555a; -} - -static const struct devs_id pcal9555a_1_dev_id __initconst = { - .name = "pcal9555a-1", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &pcal9555a_platform_data, -}; - -static const struct devs_id pcal9555a_2_dev_id __initconst = { - .name = "pcal9555a-2", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &pcal9555a_platform_data, -}; - -static const struct devs_id pcal9555a_3_dev_id __initconst = { - .name = "pcal9555a-3", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &pcal9555a_platform_data, -}; - -static const struct devs_id pcal9555a_4_dev_id __initconst = { - .name = "pcal9555a-4", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &pcal9555a_platform_data, -}; - -sfi_device(pcal9555a_1_dev_id); -sfi_device(pcal9555a_2_dev_id); -sfi_device(pcal9555a_3_dev_id); -sfi_device(pcal9555a_4_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c b/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c deleted file mode 100644 index 139738bbdd36..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_tc35876x.c +++ /dev/null @@ -1,42 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_tc35876x.c: tc35876x platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/gpio/machine.h> -#include <asm/intel-mid.h> - -static struct gpiod_lookup_table tc35876x_gpio_table = { - .dev_id = "i2c_disp_brig", - .table = { - GPIO_LOOKUP("0000:00:0c.0", -1, "bridge-reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("0000:00:0c.0", -1, "bl-en", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("0000:00:0c.0", -1, "vadd", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -/*tc35876x DSI_LVDS bridge chip and panel platform data*/ -static void *tc35876x_platform_data(void *data) -{ - struct gpiod_lookup_table *table = &tc35876x_gpio_table; - struct gpiod_lookup *lookup = table->table; - - lookup[0].chip_hwnum = get_gpio_by_name("LCMB_RXEN"); - lookup[1].chip_hwnum = get_gpio_by_name("6S6P_BL_EN"); - lookup[2].chip_hwnum = get_gpio_by_name("EN_VREG_LCD_V3P3"); - gpiod_add_lookup_table(table); - - return NULL; -} - -static const struct devs_id tc35876x_dev_id __initconst = { - .name = "i2c_disp_brig", - .type = SFI_DEV_TYPE_I2C, - .get_platform_data = &tc35876x_platform_data, -}; - -sfi_device(tc35876x_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c b/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c deleted file mode 100644 index e689d8f61059..000000000000 --- a/arch/x86/platform/intel-mid/device_libs/platform_tca6416.c +++ /dev/null @@ -1,53 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * platform_tca6416.c: tca6416 platform data initialization file - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/platform_data/pca953x.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <asm/intel-mid.h> - -#define TCA6416_NAME "tca6416" -#define TCA6416_BASE "tca6416_base" -#define TCA6416_INTR "tca6416_int" - -static void *tca6416_platform_data(void *info) -{ - static struct pca953x_platform_data tca6416; - struct i2c_board_info *i2c_info = info; - int gpio_base, intr; - char base_pin_name[SFI_NAME_LEN + 1]; - char intr_pin_name[SFI_NAME_LEN + 1]; - - strcpy(i2c_info->type, TCA6416_NAME); - strcpy(base_pin_name, TCA6416_BASE); - strcpy(intr_pin_name, TCA6416_INTR); - - gpio_base = get_gpio_by_name(base_pin_name); - intr = get_gpio_by_name(intr_pin_name); - - if (gpio_base < 0) - return NULL; - tca6416.gpio_base = gpio_base; - if (intr >= 0) { - i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; - tca6416.irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; - } else { - i2c_info->irq = -1; - tca6416.irq_base = -1; - } - return &tca6416; -} - -static const struct devs_id tca6416_dev_id __initconst = { - .name = "tca6416", - .type = SFI_DEV_TYPE_I2C, - .delay = 1, - .get_platform_data = &tca6416_platform_data, -}; - -sfi_device(tca6416_dev_id); diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c index 780728161f7d..f4592dc7a1c1 100644 --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -1,8 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * intel-mid.c: Intel MID platform setup code + * Intel MID platform setup code * - * (C) Copyright 2008, 2012 Intel Corporation + * (C) Copyright 2008, 2012, 2021 Intel Corporation * Author: Jacob Pan (jacob.jun.pan@intel.com) * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> */ @@ -14,7 +14,6 @@ #include <linux/interrupt.h> #include <linux/regulator/machine.h> #include <linux/scatterlist.h> -#include <linux/sfi.h> #include <linux/irq.h> #include <linux/export.h> #include <linux/notifier.h> @@ -25,38 +24,13 @@ #include <asm/apic.h> #include <asm/io_apic.h> #include <asm/intel-mid.h> -#include <asm/intel_mid_vrtc.h> #include <asm/io.h> #include <asm/i8259.h> #include <asm/intel_scu_ipc.h> -#include <asm/apb_timer.h> #include <asm/reboot.h> -/* - * the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock, - * cmdline option x86_intel_mid_timer can be used to override the configuration - * to prefer one or the other. - * at runtime, there are basically three timer configurations: - * 1. per cpu apbt clock only - * 2. per cpu always-on lapic clocks only, this is Penwell/Medfield only - * 3. per cpu lapic clock (C3STOP) and one apbt clock, with broadcast. - * - * by default (without cmdline option), platform code first detects cpu type - * to see if we are on lincroft or penwell, then set up both lapic or apbt - * clocks accordingly. - * i.e. by default, medfield uses configuration #2, moorestown uses #1. - * config #3 is supported but not recommended on medfield. - * - * rating and feature summary: - * lapic (with C3STOP) --------- 100 - * apbt (always-on) ------------ 110 - * lapic (always-on,ARAT) ------ 150 - */ - -enum intel_mid_timer_options intel_mid_timer_options; - -enum intel_mid_cpu_type __intel_mid_cpu_chip; -EXPORT_SYMBOL_GPL(__intel_mid_cpu_chip); +#define IPCMSG_COLD_OFF 0x80 /* Only for Tangier */ +#define IPCMSG_COLD_RESET 0xF1 static void intel_mid_power_off(void) { @@ -64,69 +38,32 @@ static void intel_mid_power_off(void) intel_mid_pwr_power_off(); /* Only for Tangier, the rest will ignore this command */ - intel_scu_ipc_simple_command(IPCMSG_COLD_OFF, 1); + intel_scu_ipc_dev_simple_command(NULL, IPCMSG_COLD_OFF, 1); }; static void intel_mid_reboot(void) { - intel_scu_ipc_simple_command(IPCMSG_COLD_RESET, 0); -} - -static void __init intel_mid_setup_bp_timer(void) -{ - apbt_time_init(); - setup_boot_APIC_clock(); + intel_scu_ipc_dev_simple_command(NULL, IPCMSG_COLD_RESET, 0); } static void __init intel_mid_time_init(void) { - sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr); - - switch (intel_mid_timer_options) { - case INTEL_MID_TIMER_APBT_ONLY: - break; - case INTEL_MID_TIMER_LAPIC_APBT: - /* Use apbt and local apic */ - x86_init.timers.setup_percpu_clockev = intel_mid_setup_bp_timer; - x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; - return; - default: - if (!boot_cpu_has(X86_FEATURE_ARAT)) - break; - /* Lapic only, no apbt */ - x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; - x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; - return; - } - - x86_init.timers.setup_percpu_clockev = apbt_time_init; + /* Lapic only, no apbt */ + x86_init.timers.setup_percpu_clockev = setup_boot_APIC_clock; + x86_cpuinit.setup_percpu_clockev = setup_secondary_APIC_clock; } static void intel_mid_arch_setup(void) { - if (boot_cpu_data.x86 != 6) { - pr_err("Unknown Intel MID CPU (%d:%d), default to Penwell\n", - boot_cpu_data.x86, boot_cpu_data.x86_model); - __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL; - goto out; - } - switch (boot_cpu_data.x86_model) { - case 0x35: - __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_CLOVERVIEW; - break; case 0x3C: case 0x4A: - __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_TANGIER; x86_platform.legacy.rtc = 1; break; - case 0x27: default: - __intel_mid_cpu_chip = INTEL_MID_CPU_CHIP_PENWELL; break; } -out: /* * Intel MID platforms are using explicitly defined regulators. * @@ -159,14 +96,11 @@ void __init x86_intel_mid_early_setup(void) x86_init.timers.timer_init = intel_mid_time_init; x86_init.timers.setup_percpu_clockev = x86_init_noop; - x86_init.timers.wallclock_init = intel_mid_rtc_init; x86_init.irqs.pre_vector_init = x86_init_noop; x86_init.oem.arch_setup = intel_mid_arch_setup; - x86_cpuinit.setup_percpu_clockev = apbt_setup_secondary_clock; - x86_platform.get_nmi_reason = intel_mid_get_nmi_reason; x86_init.pci.arch_init = intel_mid_pci_init; @@ -188,25 +122,3 @@ void __init x86_intel_mid_early_setup(void) x86_init.mpparse.get_smp_config = x86_init_uint_noop; set_bit(MP_BUS_ISA, mp_bus_not_pci); } - -/* - * if user does not want to use per CPU apb timer, just give it a lower rating - * than local apic timer and skip the late per cpu timer init. - */ -static inline int __init setup_x86_intel_mid_timer(char *arg) -{ - if (!arg) - return -EINVAL; - - if (strcmp("apbt_only", arg) == 0) - intel_mid_timer_options = INTEL_MID_TIMER_APBT_ONLY; - else if (strcmp("lapic_and_apbt", arg) == 0) - intel_mid_timer_options = INTEL_MID_TIMER_LAPIC_APBT; - else { - pr_warn("X86 INTEL_MID timer option %s not recognised use x86_intel_mid_timer=apbt_only or lapic_and_apbt\n", - arg); - return -EINVAL; - } - return 0; -} -__setup("x86_intel_mid_timer=", setup_x86_intel_mid_timer); diff --git a/arch/x86/platform/intel-mid/intel_mid_vrtc.c b/arch/x86/platform/intel-mid/intel_mid_vrtc.c deleted file mode 100644 index 2226da4f437a..000000000000 --- a/arch/x86/platform/intel-mid/intel_mid_vrtc.c +++ /dev/null @@ -1,173 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * intel_mid_vrtc.c: Driver for virtual RTC device on Intel MID platform - * - * (C) Copyright 2009 Intel Corporation - * - * Note: - * VRTC is emulated by system controller firmware, the real HW - * RTC is located in the PMIC device. SCU FW shadows PMIC RTC - * in a memory mapped IO space that is visible to the host IA - * processor. - * - * This driver is based on RTC CMOS driver. - */ - -#include <linux/kernel.h> -#include <linux/export.h> -#include <linux/init.h> -#include <linux/sfi.h> -#include <linux/platform_device.h> -#include <linux/mc146818rtc.h> - -#include <asm/intel-mid.h> -#include <asm/intel_mid_vrtc.h> -#include <asm/time.h> -#include <asm/fixmap.h> - -static unsigned char __iomem *vrtc_virt_base; - -unsigned char vrtc_cmos_read(unsigned char reg) -{ - unsigned char retval; - - /* vRTC's registers range from 0x0 to 0xD */ - if (reg > 0xd || !vrtc_virt_base) - return 0xff; - - lock_cmos_prefix(reg); - retval = __raw_readb(vrtc_virt_base + (reg << 2)); - lock_cmos_suffix(reg); - return retval; -} -EXPORT_SYMBOL_GPL(vrtc_cmos_read); - -void vrtc_cmos_write(unsigned char val, unsigned char reg) -{ - if (reg > 0xd || !vrtc_virt_base) - return; - - lock_cmos_prefix(reg); - __raw_writeb(val, vrtc_virt_base + (reg << 2)); - lock_cmos_suffix(reg); -} -EXPORT_SYMBOL_GPL(vrtc_cmos_write); - -void vrtc_get_time(struct timespec64 *now) -{ - u8 sec, min, hour, mday, mon; - unsigned long flags; - u32 year; - - spin_lock_irqsave(&rtc_lock, flags); - - while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP)) - cpu_relax(); - - sec = vrtc_cmos_read(RTC_SECONDS); - min = vrtc_cmos_read(RTC_MINUTES); - hour = vrtc_cmos_read(RTC_HOURS); - mday = vrtc_cmos_read(RTC_DAY_OF_MONTH); - mon = vrtc_cmos_read(RTC_MONTH); - year = vrtc_cmos_read(RTC_YEAR); - - spin_unlock_irqrestore(&rtc_lock, flags); - - /* vRTC YEAR reg contains the offset to 1972 */ - year += 1972; - - pr_info("vRTC: sec: %d min: %d hour: %d day: %d " - "mon: %d year: %d\n", sec, min, hour, mday, mon, year); - - now->tv_sec = mktime64(year, mon, mday, hour, min, sec); - now->tv_nsec = 0; -} - -int vrtc_set_mmss(const struct timespec64 *now) -{ - unsigned long flags; - struct rtc_time tm; - int year; - int retval = 0; - - rtc_time64_to_tm(now->tv_sec, &tm); - if (!rtc_valid_tm(&tm) && tm.tm_year >= 72) { - /* - * tm.year is the number of years since 1900, and the - * vrtc need the years since 1972. - */ - year = tm.tm_year - 72; - spin_lock_irqsave(&rtc_lock, flags); - vrtc_cmos_write(year, RTC_YEAR); - vrtc_cmos_write(tm.tm_mon, RTC_MONTH); - vrtc_cmos_write(tm.tm_mday, RTC_DAY_OF_MONTH); - vrtc_cmos_write(tm.tm_hour, RTC_HOURS); - vrtc_cmos_write(tm.tm_min, RTC_MINUTES); - vrtc_cmos_write(tm.tm_sec, RTC_SECONDS); - spin_unlock_irqrestore(&rtc_lock, flags); - } else { - pr_err("%s: Invalid vRTC value: write of %llx to vRTC failed\n", - __func__, (s64)now->tv_sec); - retval = -EINVAL; - } - return retval; -} - -void __init intel_mid_rtc_init(void) -{ - unsigned long vrtc_paddr; - - sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc); - - vrtc_paddr = sfi_mrtc_array[0].phys_addr; - if (!sfi_mrtc_num || !vrtc_paddr) - return; - - vrtc_virt_base = (void __iomem *)set_fixmap_offset_nocache(FIX_LNW_VRTC, - vrtc_paddr); - x86_platform.get_wallclock = vrtc_get_time; - x86_platform.set_wallclock = vrtc_set_mmss; -} - -/* - * The Moorestown platform has a memory mapped virtual RTC device that emulates - * the programming interface of the RTC. - */ - -static struct resource vrtc_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device vrtc_device = { - .name = "rtc_mrst", - .id = -1, - .resource = vrtc_resources, - .num_resources = ARRAY_SIZE(vrtc_resources), -}; - -/* Register the RTC device if appropriate */ -static int __init intel_mid_device_create(void) -{ - /* No Moorestown, no device */ - if (!intel_mid_identify_cpu()) - return -ENODEV; - /* No timer, no device */ - if (!sfi_mrtc_num) - return -ENODEV; - - /* iomem resource */ - vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr; - vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr + - MRST_VRTC_MAP_SZ; - /* irq resource */ - vrtc_resources[1].start = sfi_mrtc_array[0].irq; - vrtc_resources[1].end = sfi_mrtc_array[0].irq; - - return platform_device_register(&vrtc_device); -} -device_initcall(intel_mid_device_create); diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c deleted file mode 100644 index 30bd5714a3d4..000000000000 --- a/arch/x86/platform/intel-mid/sfi.c +++ /dev/null @@ -1,543 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * intel_mid_sfi.c: Intel MID SFI initialization code - * - * (C) Copyright 2013 Intel Corporation - * Author: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@intel.com> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/scatterlist.h> -#include <linux/sfi.h> -#include <linux/spi/spi.h> -#include <linux/i2c.h> -#include <linux/skbuff.h> -#include <linux/gpio.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/export.h> -#include <linux/notifier.h> -#include <linux/mmc/core.h> -#include <linux/mmc/card.h> -#include <linux/blkdev.h> - -#include <asm/setup.h> -#include <asm/mpspec_def.h> -#include <asm/hw_irq.h> -#include <asm/apic.h> -#include <asm/io_apic.h> -#include <asm/intel-mid.h> -#include <asm/intel_mid_vrtc.h> -#include <asm/io.h> -#include <asm/i8259.h> -#include <asm/intel_scu_ipc.h> -#include <asm/apb_timer.h> -#include <asm/reboot.h> - -#define SFI_SIG_OEM0 "OEM0" -#define MAX_IPCDEVS 24 -#define MAX_SCU_SPI 24 -#define MAX_SCU_I2C 24 - -static struct platform_device *ipc_devs[MAX_IPCDEVS]; -static struct spi_board_info *spi_devs[MAX_SCU_SPI]; -static struct i2c_board_info *i2c_devs[MAX_SCU_I2C]; -static struct sfi_gpio_table_entry *gpio_table; -static struct sfi_timer_table_entry sfi_mtimer_array[SFI_MTMR_MAX_NUM]; -static int ipc_next_dev; -static int spi_next_dev; -static int i2c_next_dev; -static int i2c_bus[MAX_SCU_I2C]; -static int gpio_num_entry; -static u32 sfi_mtimer_usage[SFI_MTMR_MAX_NUM]; -int sfi_mrtc_num; -int sfi_mtimer_num; - -struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX]; -EXPORT_SYMBOL_GPL(sfi_mrtc_array); - -struct blocking_notifier_head intel_scu_notifier = - BLOCKING_NOTIFIER_INIT(intel_scu_notifier); -EXPORT_SYMBOL_GPL(intel_scu_notifier); - -#define intel_mid_sfi_get_pdata(dev, priv) \ - ((dev)->get_platform_data ? (dev)->get_platform_data(priv) : NULL) - -/* parse all the mtimer info to a static mtimer array */ -int __init sfi_parse_mtmr(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_timer_table_entry *pentry; - struct mpc_intsrc mp_irq; - int totallen; - - sb = (struct sfi_table_simple *)table; - if (!sfi_mtimer_num) { - sfi_mtimer_num = SFI_GET_NUM_ENTRIES(sb, - struct sfi_timer_table_entry); - pentry = (struct sfi_timer_table_entry *) sb->pentry; - totallen = sfi_mtimer_num * sizeof(*pentry); - memcpy(sfi_mtimer_array, pentry, totallen); - } - - pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num); - pentry = sfi_mtimer_array; - for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) { - pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz, irq = %d\n", - totallen, (u32)pentry->phys_addr, - pentry->freq_hz, pentry->irq); - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = MP_IRQTRIG_EDGE | MP_IRQPOL_ACTIVE_HIGH; - mp_irq.srcbus = MP_BUS_ISA; - mp_irq.srcbusirq = pentry->irq; /* IRQ */ - mp_irq.dstapic = MP_APIC_ALL; - mp_irq.dstirq = pentry->irq; - mp_save_irq(&mp_irq); - mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC, NULL); - } - - return 0; -} - -struct sfi_timer_table_entry *sfi_get_mtmr(int hint) -{ - int i; - if (hint < sfi_mtimer_num) { - if (!sfi_mtimer_usage[hint]) { - pr_debug("hint taken for timer %d irq %d\n", - hint, sfi_mtimer_array[hint].irq); - sfi_mtimer_usage[hint] = 1; - return &sfi_mtimer_array[hint]; - } - } - /* take the first timer available */ - for (i = 0; i < sfi_mtimer_num;) { - if (!sfi_mtimer_usage[i]) { - sfi_mtimer_usage[i] = 1; - return &sfi_mtimer_array[i]; - } - i++; - } - return NULL; -} - -void sfi_free_mtmr(struct sfi_timer_table_entry *mtmr) -{ - int i; - for (i = 0; i < sfi_mtimer_num;) { - if (mtmr->irq == sfi_mtimer_array[i].irq) { - sfi_mtimer_usage[i] = 0; - return; - } - i++; - } -} - -/* parse all the mrtc info to a global mrtc array */ -int __init sfi_parse_mrtc(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_rtc_table_entry *pentry; - struct mpc_intsrc mp_irq; - - int totallen; - - sb = (struct sfi_table_simple *)table; - if (!sfi_mrtc_num) { - sfi_mrtc_num = SFI_GET_NUM_ENTRIES(sb, - struct sfi_rtc_table_entry); - pentry = (struct sfi_rtc_table_entry *)sb->pentry; - totallen = sfi_mrtc_num * sizeof(*pentry); - memcpy(sfi_mrtc_array, pentry, totallen); - } - - pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num); - pentry = sfi_mrtc_array; - for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) { - pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n", - totallen, (u32)pentry->phys_addr, pentry->irq); - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = MP_IRQTRIG_LEVEL | MP_IRQPOL_ACTIVE_LOW; - mp_irq.srcbus = MP_BUS_ISA; - mp_irq.srcbusirq = pentry->irq; /* IRQ */ - mp_irq.dstapic = MP_APIC_ALL; - mp_irq.dstirq = pentry->irq; - mp_save_irq(&mp_irq); - mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC, NULL); - } - return 0; -} - - -/* - * Parsing GPIO table first, since the DEVS table will need this table - * to map the pin name to the actual pin. - */ -static int __init sfi_parse_gpio(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_gpio_table_entry *pentry; - int num, i; - - if (gpio_table) - return 0; - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry); - pentry = (struct sfi_gpio_table_entry *)sb->pentry; - - gpio_table = kmemdup(pentry, num * sizeof(*pentry), GFP_KERNEL); - if (!gpio_table) - return -1; - gpio_num_entry = num; - - pr_debug("GPIO pin info:\n"); - for (i = 0; i < num; i++, pentry++) - pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s," - " pin = %d\n", i, - pentry->controller_name, - pentry->pin_name, - pentry->pin_no); - return 0; -} - -int get_gpio_by_name(const char *name) -{ - struct sfi_gpio_table_entry *pentry = gpio_table; - int i; - - if (!pentry) - return -1; - for (i = 0; i < gpio_num_entry; i++, pentry++) { - if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN)) - return pentry->pin_no; - } - return -EINVAL; -} - -static void __init intel_scu_ipc_device_register(struct platform_device *pdev) -{ - if (ipc_next_dev == MAX_IPCDEVS) - pr_err("too many SCU IPC devices"); - else - ipc_devs[ipc_next_dev++] = pdev; -} - -static void __init intel_scu_spi_device_register(struct spi_board_info *sdev) -{ - struct spi_board_info *new_dev; - - if (spi_next_dev == MAX_SCU_SPI) { - pr_err("too many SCU SPI devices"); - return; - } - - new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL); - if (!new_dev) { - pr_err("failed to alloc mem for delayed spi dev %s\n", - sdev->modalias); - return; - } - *new_dev = *sdev; - - spi_devs[spi_next_dev++] = new_dev; -} - -static void __init intel_scu_i2c_device_register(int bus, - struct i2c_board_info *idev) -{ - struct i2c_board_info *new_dev; - - if (i2c_next_dev == MAX_SCU_I2C) { - pr_err("too many SCU I2C devices"); - return; - } - - new_dev = kzalloc(sizeof(*idev), GFP_KERNEL); - if (!new_dev) { - pr_err("failed to alloc mem for delayed i2c dev %s\n", - idev->type); - return; - } - *new_dev = *idev; - - i2c_bus[i2c_next_dev] = bus; - i2c_devs[i2c_next_dev++] = new_dev; -} - -/* Called by IPC driver */ -void intel_scu_devices_create(void) -{ - int i; - - for (i = 0; i < ipc_next_dev; i++) - platform_device_add(ipc_devs[i]); - - for (i = 0; i < spi_next_dev; i++) - spi_register_board_info(spi_devs[i], 1); - - for (i = 0; i < i2c_next_dev; i++) { - struct i2c_adapter *adapter; - struct i2c_client *client; - - adapter = i2c_get_adapter(i2c_bus[i]); - if (adapter) { - client = i2c_new_client_device(adapter, i2c_devs[i]); - if (IS_ERR(client)) - pr_err("can't create i2c device %s\n", - i2c_devs[i]->type); - } else - i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); - } - intel_scu_notifier_post(SCU_AVAILABLE, NULL); -} -EXPORT_SYMBOL_GPL(intel_scu_devices_create); - -/* Called by IPC driver */ -void intel_scu_devices_destroy(void) -{ - int i; - - intel_scu_notifier_post(SCU_DOWN, NULL); - - for (i = 0; i < ipc_next_dev; i++) - platform_device_del(ipc_devs[i]); -} -EXPORT_SYMBOL_GPL(intel_scu_devices_destroy); - -static void __init install_irq_resource(struct platform_device *pdev, int irq) -{ - /* Single threaded */ - static struct resource res __initdata = { - .name = "IRQ", - .flags = IORESOURCE_IRQ, - }; - res.start = irq; - platform_device_add_resources(pdev, &res, 1); -} - -static void __init sfi_handle_ipc_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct platform_device *pdev; - void *pdata = NULL; - - pr_debug("IPC bus, name = %16.16s, irq = 0x%2x\n", - pentry->name, pentry->irq); - - /* - * We need to call platform init of IPC devices to fill misc_pdata - * structure. It will be used in msic_init for initialization. - */ - pdata = intel_mid_sfi_get_pdata(dev, pentry); - if (IS_ERR(pdata)) - return; - - /* - * On Medfield the platform device creation is handled by the MSIC - * MFD driver so we don't need to do it here. - */ - if (dev->msic && intel_mid_has_msic()) - return; - - pdev = platform_device_alloc(pentry->name, 0); - if (pdev == NULL) { - pr_err("out of memory for SFI platform device '%s'.\n", - pentry->name); - return; - } - install_irq_resource(pdev, pentry->irq); - - pdev->dev.platform_data = pdata; - if (dev->delay) - intel_scu_ipc_device_register(pdev); - else - platform_device_add(pdev); -} - -static void __init sfi_handle_spi_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct spi_board_info spi_info; - void *pdata = NULL; - - memset(&spi_info, 0, sizeof(spi_info)); - strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN); - spi_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); - spi_info.bus_num = pentry->host_num; - spi_info.chip_select = pentry->addr; - spi_info.max_speed_hz = pentry->max_freq; - pr_debug("SPI bus=%d, name=%16.16s, irq=0x%2x, max_freq=%d, cs=%d\n", - spi_info.bus_num, - spi_info.modalias, - spi_info.irq, - spi_info.max_speed_hz, - spi_info.chip_select); - - pdata = intel_mid_sfi_get_pdata(dev, &spi_info); - if (IS_ERR(pdata)) - return; - - spi_info.platform_data = pdata; - if (dev->delay) - intel_scu_spi_device_register(&spi_info); - else - spi_register_board_info(&spi_info, 1); -} - -static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct i2c_board_info i2c_info; - void *pdata = NULL; - - memset(&i2c_info, 0, sizeof(i2c_info)); - strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN); - i2c_info.irq = ((pentry->irq == (u8)0xff) ? 0 : pentry->irq); - i2c_info.addr = pentry->addr; - pr_debug("I2C bus = %d, name = %16.16s, irq = 0x%2x, addr = 0x%x\n", - pentry->host_num, - i2c_info.type, - i2c_info.irq, - i2c_info.addr); - pdata = intel_mid_sfi_get_pdata(dev, &i2c_info); - i2c_info.platform_data = pdata; - if (IS_ERR(pdata)) - return; - - if (dev->delay) - intel_scu_i2c_device_register(pentry->host_num, &i2c_info); - else - i2c_register_board_info(pentry->host_num, &i2c_info, 1); -} - -static void __init sfi_handle_sd_dev(struct sfi_device_table_entry *pentry, - struct devs_id *dev) -{ - struct mid_sd_board_info sd_info; - void *pdata; - - memset(&sd_info, 0, sizeof(sd_info)); - strncpy(sd_info.name, pentry->name, SFI_NAME_LEN); - sd_info.bus_num = pentry->host_num; - sd_info.max_clk = pentry->max_freq; - sd_info.addr = pentry->addr; - pr_debug("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n", - sd_info.bus_num, - sd_info.name, - sd_info.max_clk, - sd_info.addr); - pdata = intel_mid_sfi_get_pdata(dev, &sd_info); - if (IS_ERR(pdata)) - return; - - /* Nothing we can do with this for now */ - sd_info.platform_data = pdata; - - pr_debug("Successfully registered %16.16s", sd_info.name); -} - -extern struct devs_id *const __x86_intel_mid_dev_start[], - *const __x86_intel_mid_dev_end[]; - -static struct devs_id __init *get_device_id(u8 type, char *name) -{ - struct devs_id *const *dev_table; - - for (dev_table = __x86_intel_mid_dev_start; - dev_table < __x86_intel_mid_dev_end; dev_table++) { - struct devs_id *dev = *dev_table; - if (dev->type == type && - !strncmp(dev->name, name, SFI_NAME_LEN)) { - return dev; - } - } - - return NULL; -} - -static int __init sfi_parse_devs(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_device_table_entry *pentry; - struct devs_id *dev = NULL; - int num, i, ret; - int polarity; - struct irq_alloc_info info; - - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry); - pentry = (struct sfi_device_table_entry *)sb->pentry; - - for (i = 0; i < num; i++, pentry++) { - int irq = pentry->irq; - - if (irq != (u8)0xff) { /* native RTE case */ - /* these SPI2 devices are not exposed to system as PCI - * devices, but they have separate RTE entry in IOAPIC - * so we have to enable them one by one here - */ - if (intel_mid_identify_cpu() == - INTEL_MID_CPU_CHIP_TANGIER) { - if (!strncmp(pentry->name, "r69001-ts-i2c", 13)) - /* active low */ - polarity = 1; - else if (!strncmp(pentry->name, - "synaptics_3202", 14)) - /* active low */ - polarity = 1; - else if (irq == 41) - /* fast_int_1 */ - polarity = 1; - else - /* active high */ - polarity = 0; - } else { - /* PNW and CLV go with active low */ - polarity = 1; - } - - ioapic_set_alloc_attr(&info, NUMA_NO_NODE, 1, polarity); - ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC, &info); - WARN_ON(ret < 0); - } - - dev = get_device_id(pentry->type, pentry->name); - - if (!dev) - continue; - - switch (pentry->type) { - case SFI_DEV_TYPE_IPC: - sfi_handle_ipc_dev(pentry, dev); - break; - case SFI_DEV_TYPE_SPI: - sfi_handle_spi_dev(pentry, dev); - break; - case SFI_DEV_TYPE_I2C: - sfi_handle_i2c_dev(pentry, dev); - break; - case SFI_DEV_TYPE_SD: - sfi_handle_sd_dev(pentry, dev); - break; - case SFI_DEV_TYPE_UART: - case SFI_DEV_TYPE_HSI: - default: - break; - } - } - return 0; -} - -static int __init intel_mid_platform_init(void) -{ - sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio); - sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs); - return 0; -} -arch_initcall(intel_mid_platform_init); diff --git a/arch/x86/platform/sfi/Makefile b/arch/x86/platform/sfi/Makefile deleted file mode 100644 index 4eba24c2af67..000000000000 --- a/arch/x86/platform/sfi/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_SFI) += sfi.o diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c deleted file mode 100644 index 6259563760f9..000000000000 --- a/arch/x86/platform/sfi/sfi.c +++ /dev/null @@ -1,100 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * sfi.c - x86 architecture SFI support. - * - * Copyright (c) 2009, Intel Corporation. - */ - -#define KMSG_COMPONENT "SFI" -#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt - -#include <linux/acpi.h> -#include <linux/init.h> -#include <linux/sfi.h> -#include <linux/io.h> - -#include <asm/irqdomain.h> -#include <asm/io_apic.h> -#include <asm/mpspec.h> -#include <asm/setup.h> -#include <asm/apic.h> - -#ifdef CONFIG_X86_LOCAL_APIC -static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; - -/* All CPUs enumerated by SFI must be present and enabled */ -static void __init mp_sfi_register_lapic(u8 id) -{ - if (MAX_LOCAL_APIC - id <= 0) { - pr_warn("Processor #%d invalid (max %d)\n", id, MAX_LOCAL_APIC); - return; - } - - pr_info("registering lapic[%d]\n", id); - - generic_processor_info(id, GET_APIC_VERSION(apic_read(APIC_LVR))); -} - -static int __init sfi_parse_cpus(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_cpu_table_entry *pentry; - int i; - int cpu_num; - - sb = (struct sfi_table_simple *)table; - cpu_num = SFI_GET_NUM_ENTRIES(sb, struct sfi_cpu_table_entry); - pentry = (struct sfi_cpu_table_entry *)sb->pentry; - - for (i = 0; i < cpu_num; i++) { - mp_sfi_register_lapic(pentry->apic_id); - pentry++; - } - - smp_found_config = 1; - return 0; -} -#endif /* CONFIG_X86_LOCAL_APIC */ - -#ifdef CONFIG_X86_IO_APIC - -static int __init sfi_parse_ioapic(struct sfi_table_header *table) -{ - struct sfi_table_simple *sb; - struct sfi_apic_table_entry *pentry; - int i, num; - struct ioapic_domain_cfg cfg = { - .type = IOAPIC_DOMAIN_STRICT, - .ops = &mp_ioapic_irqdomain_ops, - }; - - sb = (struct sfi_table_simple *)table; - num = SFI_GET_NUM_ENTRIES(sb, struct sfi_apic_table_entry); - pentry = (struct sfi_apic_table_entry *)sb->pentry; - - for (i = 0; i < num; i++) { - mp_register_ioapic(i, pentry->phys_addr, gsi_top, &cfg); - pentry++; - } - - WARN(pic_mode, KERN_WARNING - "SFI: pic_mod shouldn't be 1 when IOAPIC table is present\n"); - pic_mode = 0; - return 0; -} -#endif /* CONFIG_X86_IO_APIC */ - -/* - * sfi_platform_init(): register lapics & io-apics - */ -int __init sfi_platform_init(void) -{ -#ifdef CONFIG_X86_LOCAL_APIC - register_lapic_address(sfi_lapic_addr); - sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus); -#endif -#ifdef CONFIG_X86_IO_APIC - sfi_table_parse(SFI_SIG_APIC, NULL, NULL, sfi_parse_ioapic); -#endif - return 0; -} |