diff options
Diffstat (limited to 'arch')
34 files changed, 40 insertions, 40 deletions
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e238ad8cfd8f..018d637f87fc 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -107,7 +107,7 @@ config ARCH_AT91SAM9260_SAM9XE depends on ARCH_AT91SAM9260 help Select this if you are using Atmel's AT91SAM9XE System-on-Chip. - They are basicaly AT91SAM9260s with various sizes of embedded Flash. + They are basically AT91SAM9260s with various sizes of embedded Flash. comment "AT91SAM9260 / AT91SAM9XE Board Type" diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 8781aaeb576b..c7e229b00f6e 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -84,7 +84,7 @@ config MACH_OMAP_PALMTE Support for the Palm Tungsten E PDA. Currently only the LCD panel is supported. To boot the kernel, you'll need a PalmOS compatible bootloader; check out http://palmtelinux.sourceforge.net for more - informations. + information. Say Y here if you have such a PDA, say NO otherwise. config MACH_NOKIA770 diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S index 637aaba65390..d1eeed2ad47c 100644 --- a/arch/arm/mach-s3c2410/sleep.S +++ b/arch/arm/mach-s3c2410/sleep.S @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S +/* linux/arch/arm/mach-s3c2410/sleep.S * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index 435349dc3243..7b7ae790b00d 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-s3c2410/sleep.S +/* linux/arch/arm/plat-s3c24xx/sleep.S * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index f64624fc4504..1d859c16931e 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -603,7 +603,7 @@ config ETRAX_CARDBUS select HOTPLUG select PCCARD_NONSTATIC help - Enabled the ETRAX Carbus driver. + Enabled the ETRAX Cardbus driver. config PCI bool diff --git a/arch/h8300/Kconfig.debug b/arch/h8300/Kconfig.debug index e0e9bcb015a9..554efe604a08 100644 --- a/arch/h8300/Kconfig.debug +++ b/arch/h8300/Kconfig.debug @@ -21,12 +21,12 @@ config GDB_MAGICPRINT bool "Message Output for GDB MagicPrint service" depends on (H8300H_SIM || H8S_SIM) help - kernel messages output useing MagicPrint service from GDB + kernel messages output using MagicPrint service from GDB config SYSCALL_PRINT bool "SystemCall trace print" help - outout history of systemcall + output history of systemcall config GDB_DEBUG bool "Use gdb stub" diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig index 64ad10f984a1..30944ee2e61a 100644 --- a/arch/i386/Kconfig +++ b/arch/i386/Kconfig @@ -858,9 +858,9 @@ config RELOCATABLE bool "Build a relocatable kernel(EXPERIMENTAL)" depends on EXPERIMENTAL help - This build a kernel image that retains relocation information + This builds a kernel image that retains relocation information so it can be loaded someplace besides the default 1MB. - The relocations tend to the kernel binary about 10% larger, + The relocations tend to make the kernel binary about 10% larger, but are discarded at runtime. One use is for the kexec on panic case where the recovery kernel diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index dce6124cb842..d7f6fb0b30f2 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -108,7 +108,7 @@ config MCORE2 bool "Core 2/newer Xeon" help Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and 53xx) - CPUs. You can distingush newer from older Xeons by the CPU family + CPUs. You can distinguish newer from older Xeons by the CPU family in /proc/cpuinfo. Newer ones have 6. config MPENTIUM4 @@ -172,7 +172,7 @@ config MWINCHIP3D help Select this for an IDT Winchip-2A or 3. Linux and GCC treat this chip as a 586TSC with some extended instructions - and alignment reqirements. Also enable out of order memory + and alignment requirements. Also enable out of order memory stores for this CPU, which can increase performance of some operations. diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c index 5b0a040213c2..7ba7c3abd3a4 100644 --- a/arch/i386/kernel/cpu/mcheck/therm_throt.c +++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c @@ -1,5 +1,5 @@ /* - * linux/arch/i386/kerne/cpu/mcheck/therm_throt.c + * linux/arch/i386/kernel/cpu/mcheck/therm_throt.c * * Thermal throttle event support code (such as syslog messaging and rate * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c). diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index e23af4b6ae8c..6e41471449c0 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -468,7 +468,7 @@ config KEXEC help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot + but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. The name comes from the similiarity to the exec system call. diff --git a/arch/m68knommu/Kconfig.debug b/arch/m68knommu/Kconfig.debug index 763c9aa0b4fd..9ff47bd09aee 100644 --- a/arch/m68knommu/Kconfig.debug +++ b/arch/m68knommu/Kconfig.debug @@ -5,7 +5,7 @@ source "lib/Kconfig.debug" config FULLDEBUG bool "Full Symbolic/Source Debugging support" help - Enable debuging symbols on kernel build. + Enable debugging symbols on kernel build. config HIGHPROFILE bool "Use fast second timer for profiling" diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index b7cb048bc771..16ecea3c0813 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -956,7 +956,7 @@ choice byte order. These modes require different kernels and a different Linux distribution. In general there is one preferred byteorder for a particular system but some systems are just as commonly used in the - one or the other endianess. + one or the other endianness. config CPU_BIG_ENDIAN bool "Big endian" @@ -1750,7 +1750,7 @@ config ARCH_DISCONTIGMEM_ENABLE bool default y if SGI_IP27 help - Say Y to upport efficient handling of discontiguous physical memory, + Say Y to support efficient handling of discontiguous physical memory, for architectures which are either NUMA (Non-Uniform Memory Access) or have huge holes in the physical address space for other reasons. See <file:Documentation/vm/numa> for more. @@ -1938,7 +1938,7 @@ config KEXEC help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot + but it is independent of the system firmware. And like a reboot you can start any kernel with it, not just Linux. The name comes from the similiarity to the exec system call. diff --git a/arch/mips/Makefile b/arch/mips/Makefile index f2f742df32c7..4892db88a86a 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -92,7 +92,7 @@ cflags-y += -ffreestanding # when fed the toolchain default! # # Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of -# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL +# 2006-10-10 don't properly change the predefined symbols if -EB / -EL # are used, so we kludge that here. A bug has been filed at # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. # diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index 7a7444874e80..0ad39e53f7b1 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -14,7 +14,7 @@ #include <linux/pci.h> /* - * Set the the BCM1250, etc. PCI host bridge's TRDY timeout + * Set the BCM1250, etc. PCI host bridge's TRDY timeout * to the finite max. */ static void __init quirk_sb1250_pci(struct pci_dev *dev) @@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT, quirk_sb1250_ht); /* - * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max. + * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max. */ static void __init quirk_sp1011(struct pci_dev *dev) { diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index f70e795c262e..346cd3befe1e 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -32,7 +32,7 @@ config HCALL_STATS depends on PPC_PSERIES && DEBUG_FS help Adds code to keep track of the number of hypervisor calls made and - the amount of time spent in hypervisor callsr. Wall time spent in + the amount of time spent in hypervisor calls. Wall time spent in each call is always calculated, and if available CPU cycles spent are also calculated. A directory named hcall_inst is added at the root of the debugfs filesystem. Within the hcall_inst directory diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 626b29f38304..c29293befba9 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -747,7 +747,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) * counter value etc.) are not copied to the actual registers * until the performance monitor is enabled. In order to get * this to work as desired, the permormance monitor needs to - * be disabled while writting to the latches. This is a + * be disabled while writing to the latches. This is a * HW design issue. */ cbe_enable_pm(cpu); diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index a35315af5c53..cf0e7bc8c2e7 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -1,4 +1,4 @@ -/*arch/ppc/platforms/mpc86xads-setup.c +/*arch/powerpc/platforms/8xx/mpc86xads_setup.c * * Platform setup for the Freescale mpc86xads board * diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index a57b57785acd..c36e475d93dc 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -1,4 +1,4 @@ -/*arch/ppc/platforms/mpc885ads-setup.c +/*arch/powerpc/platforms/8xx/mpc885ads_setup.c * * Platform setup for the Freescale mpc885ads board * diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c index d68d920eb2c4..7fb92f23f380 100644 --- a/arch/powerpc/platforms/cell/io-workarounds.c +++ b/arch/powerpc/platforms/cell/io-workarounds.c @@ -74,7 +74,7 @@ static void spider_io_flush(const volatile void __iomem *addr) /* Fast path if we have a non-0 token, it indicates which bus we * are on. * - * If the token is 0, that means either the the ioremap was done + * If the token is 0, that means either that the ioremap was done * before we initialized this layer, or it's a PIO operation. We * fallback to a low path in this case. Hopefully, internal devices * which are ioremap'ed early should use in_XX/out_XX functions diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index 7ce5364fdb3b..bf72204125c5 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -1,4 +1,4 @@ -/*arch/ppc/platforms/mpc866ads-setup.c +/*arch/ppc/platforms/mpc866ads_setup.c * * Platform setup for the Freescale mpc866ads board * diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c index 10659c24b1be..9192777d0f78 100644 --- a/arch/ppc/syslib/ipic.c +++ b/arch/ppc/syslib/ipic.c @@ -1,5 +1,5 @@ /* - * include/asm-ppc/ipic.c + * arch/ppc/syslib/ipic.c * * IPIC routines implementations. * diff --git a/arch/s390/crypto/Kconfig b/arch/s390/crypto/Kconfig index 99ff9f08e4d7..d1defbbfcd81 100644 --- a/arch/s390/crypto/Kconfig +++ b/arch/s390/crypto/Kconfig @@ -54,7 +54,7 @@ config S390_PRNG default "m" help Select this option if you want to use the s390 pseudo random number - generator. The PRNG is part of the cryptograhic processor functions + generator. The PRNG is part of the cryptographic processor functions and uses triple-DES to generate secure random numbers like the ANSI X9.17 standard. The PRNG is usable via the char device /dev/prandom. diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c index 770defed9c4a..52c7bfa57c2c 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/se/7751/setup.c @@ -1,5 +1,5 @@ /* - * linux/arch/sh/kernel/setup_7751se.c + * linux/arch/sh/boards/se/7751/setup.c * * Copyright (C) 2000 Kazumoto Kojima * diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index f3e827f29a46..832c0b4a1e6c 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/entry.S + * arch/sh/kernel/cpu/sh3/entry.S * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2003 - 2006 Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh73180.c b/arch/sh/kernel/cpu/sh4a/clock-sh73180.c index 2fa5cb2ae68d..6d5ba373a75e 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh73180.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh73180.c @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/cpu/sh4/clock-sh73180.c + * arch/sh/kernel/cpu/sh4a/clock-sh73180.c * * SH73180 support for the clock framework * diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c index 1707a213f0cf..7adc4f16e95a 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/cpu/sh4/clock-sh7343.c + * arch/sh/kernel/cpu/sh4a/clock-sh7343.c * * SH7343/SH7722 support for the clock framework * diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c index c8694bac6477..8e236062c721 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7770.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7770.c @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/cpu/sh4/clock-sh7770.c + * arch/sh/kernel/cpu/sh4a/clock-sh7770.c * * SH7770 support for the clock framework * diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c index 9e6a216750c8..01f3da619d3d 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7780.c @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/cpu/sh4/clock-sh7780.c + * arch/sh/kernel/cpu/sh4a/clock-sh7780.c * * SH7780 support for the clock framework * diff --git a/arch/sh/kernel/vsyscall/vsyscall.c b/arch/sh/kernel/vsyscall/vsyscall.c index 7b0f66f03319..e146bafcd14f 100644 --- a/arch/sh/kernel/vsyscall/vsyscall.c +++ b/arch/sh/kernel/vsyscall/vsyscall.c @@ -1,5 +1,5 @@ /* - * arch/sh/kernel/vsyscall.c + * arch/sh/kernel/vsyscall/vsyscall.c * * Copyright (C) 2006 Paul Mundt * diff --git a/arch/um/include/sysdep-i386/archsetjmp.h b/arch/um/include/sysdep-i386/archsetjmp.h index 11bafab669e9..0f312085ce1d 100644 --- a/arch/um/include/sysdep-i386/archsetjmp.h +++ b/arch/um/include/sysdep-i386/archsetjmp.h @@ -1,5 +1,5 @@ /* - * arch/i386/include/klibc/archsetjmp.h + * arch/um/include/sysdep-i386/archsetjmp.h */ #ifndef _KLIBC_ARCHSETJMP_H diff --git a/arch/um/include/sysdep-x86_64/archsetjmp.h b/arch/um/include/sysdep-x86_64/archsetjmp.h index 9a5e1a6ec800..2af8f12ca161 100644 --- a/arch/um/include/sysdep-x86_64/archsetjmp.h +++ b/arch/um/include/sysdep-x86_64/archsetjmp.h @@ -1,5 +1,5 @@ /* - * arch/x86_64/include/klibc/archsetjmp.h + * arch/um/include/sysdep-x86_64/archsetjmp.h */ #ifndef _KLIBC_ARCHSETJMP_H diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S index 8bc521ca081f..e4327a8d6bcd 100644 --- a/arch/v850/kernel/entry.S +++ b/arch/v850/kernel/entry.S @@ -523,7 +523,7 @@ END(ret_from_trap) /* This the initial entry point for a new child thread, with an appropriate - stack in place that makes it look the the child is in the middle of an + stack in place that makes it look that the child is in the middle of an syscall. This function is actually `returned to' from switch_thread (copy_thread makes ret_from_fork the return address in each new thread's saved context). */ diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 4d582589fa89..d8bfe315471c 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1413,7 +1413,7 @@ static void ack_apic_level(unsigned int irq) /* * We must acknowledge the irq before we move it or the acknowledge will - * not propogate properly. + * not propagate properly. */ ack_APIC_irq(); diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c index ca76f071666e..f5319d78c876 100644 --- a/arch/xtensa/kernel/pci-dma.c +++ b/arch/xtensa/kernel/pci-dma.c @@ -1,5 +1,5 @@ /* - * arch/xtensa/pci-dma.c + * arch/xtensa/kernel/pci-dma.c * * DMA coherent memory allocation. * |