diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/tile/include/asm/processor.h | 47 | ||||
-rw-r--r-- | arch/tile/kernel/head_32.S | 3 | ||||
-rw-r--r-- | arch/tile/kernel/head_64.S | 6 | ||||
-rw-r--r-- | arch/tile/kernel/intvec_32.S | 7 | ||||
-rw-r--r-- | arch/tile/kernel/intvec_64.S | 21 | ||||
-rw-r--r-- | arch/tile/kernel/stack.c | 10 |
6 files changed, 57 insertions, 37 deletions
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h index 461322b473b5..230b830e94d4 100644 --- a/arch/tile/include/asm/processor.h +++ b/arch/tile/include/asm/processor.h @@ -148,9 +148,10 @@ struct thread_struct { /* * Start with "sp" this many bytes below the top of the kernel stack. - * This preserves the invariant that a called function may write to *sp. + * This allows us to be cache-aware when handling the initial save + * of the pt_regs value to the stack. */ -#define STACK_TOP_DELTA 8 +#define STACK_TOP_DELTA 64 /* * When entering the kernel via a fault, start with the top of the @@ -234,15 +235,15 @@ extern int do_work_pending(struct pt_regs *regs, u32 flags); unsigned long get_wchan(struct task_struct *p); /* Return initial ksp value for given task. */ -#define task_ksp0(task) ((unsigned long)(task)->stack + THREAD_SIZE) +#define task_ksp0(task) \ + ((unsigned long)(task)->stack + THREAD_SIZE - STACK_TOP_DELTA) /* Return some info about the user process TASK. */ -#define KSTK_TOP(task) (task_ksp0(task) - STACK_TOP_DELTA) #define task_pt_regs(task) \ - ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1) + ((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1) #define current_pt_regs() \ - ((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \ - (KSTK_PTREGS_GAP - 1)) - 1) + ((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \ + STACK_TOP_DELTA - (KSTK_PTREGS_GAP - 1)) - 1) #define task_sp(task) (task_pt_regs(task)->sp) #define task_pc(task) (task_pt_regs(task)->pc) /* Aliases for pc and sp (used in fs/proc/array.c) */ @@ -355,20 +356,38 @@ extern int kdata_huge; #define KERNEL_PL CONFIG_KERNEL_PL /* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */ -#define CPU_LOG_MASK_VALUE 12 -#define CPU_MASK_VALUE ((1 << CPU_LOG_MASK_VALUE) - 1) -#if CONFIG_NR_CPUS > CPU_MASK_VALUE -# error Too many cpus! +#ifdef __tilegx__ +#define CPU_SHIFT 48 +#if CHIP_VA_WIDTH() > CPU_SHIFT +# error Too many VA bits! #endif +#define MAX_CPU_ID ((1 << (64 - CPU_SHIFT)) - 1) #define raw_smp_processor_id() \ - ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & CPU_MASK_VALUE) + ((int)(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) >> CPU_SHIFT)) #define get_current_ksp0() \ - (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~CPU_MASK_VALUE) + ((unsigned long)(((long)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) << \ + (64 - CPU_SHIFT)) >> (64 - CPU_SHIFT))) +#define next_current_ksp0(task) ({ \ + unsigned long __ksp0 = task_ksp0(task) & ((1UL << CPU_SHIFT) - 1); \ + unsigned long __cpu = (long)raw_smp_processor_id() << CPU_SHIFT; \ + __ksp0 | __cpu; \ +}) +#else +#define LOG2_NR_CPU_IDS 6 +#define MAX_CPU_ID ((1 << LOG2_NR_CPU_IDS) - 1) +#define raw_smp_processor_id() \ + ((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & MAX_CPU_ID) +#define get_current_ksp0() \ + (__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~MAX_CPU_ID) #define next_current_ksp0(task) ({ \ unsigned long __ksp0 = task_ksp0(task); \ int __cpu = raw_smp_processor_id(); \ - BUG_ON(__ksp0 & CPU_MASK_VALUE); \ + BUG_ON(__ksp0 & MAX_CPU_ID); \ __ksp0 | __cpu; \ }) +#endif +#if CONFIG_NR_CPUS > (MAX_CPU_ID + 1) +# error Too many cpus! +#endif #endif /* _ASM_TILE_PROCESSOR_H */ diff --git a/arch/tile/kernel/head_32.S b/arch/tile/kernel/head_32.S index d1527fce2861..f3f17b0283ff 100644 --- a/arch/tile/kernel/head_32.S +++ b/arch/tile/kernel/head_32.S @@ -86,7 +86,7 @@ ENTRY(_start) /* * Load up our per-cpu offset. When the first (master) tile * boots, this value is still zero, so we will load boot_pc - * with start_kernel, and boot_sp with init_stack + THREAD_SIZE. + * with start_kernel, and boot_sp at the top of init_stack. * The master tile initializes the per-cpu offset array, so that * when subsequent (secondary) tiles boot, they will instead load * from their per-cpu versions of boot_sp and boot_pc. @@ -126,7 +126,6 @@ ENTRY(_start) lw sp, r1 or r4, sp, r4 mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ - addi sp, sp, -STACK_TOP_DELTA { move lr, zero /* stop backtraces in the called function */ jr r0 diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S index 969e4f81f3b3..652b81426158 100644 --- a/arch/tile/kernel/head_64.S +++ b/arch/tile/kernel/head_64.S @@ -158,7 +158,7 @@ ENTRY(_start) /* * Load up our per-cpu offset. When the first (master) tile * boots, this value is still zero, so we will load boot_pc - * with start_kernel, and boot_sp with init_stack + THREAD_SIZE. + * with start_kernel, and boot_sp with at the top of init_stack. * The master tile initializes the per-cpu offset array, so that * when subsequent (secondary) tiles boot, they will instead load * from their per-cpu versions of boot_sp and boot_pc. @@ -202,9 +202,9 @@ ENTRY(_start) } ld r0, r0 ld sp, r1 - or r4, sp, r4 + shli r4, r4, CPU_SHIFT + bfins r4, sp, 0, CPU_SHIFT-1 mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ - addi sp, sp, -STACK_TOP_DELTA { move lr, zero /* stop backtraces in the called function */ jr r0 diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index 9c0c3cb6aab0..f3d26f48e659 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -185,7 +185,7 @@ intvec_\vecname: * point sp at the top aligned address on the actual stack page. */ mfspr r0, SPR_SYSTEM_SAVE_K_0 - mm r0, r0, zero, LOG2_THREAD_SIZE, 31 + mm r0, r0, zero, LOG2_NR_CPU_IDS, 31 0: /* @@ -203,6 +203,9 @@ intvec_\vecname: * cache line 1: r14...r29 * cache line 0: 2 x frame, r0..r13 */ +#if STACK_TOP_DELTA != 64 +#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs() +#endif andi r0, r0, -64 /* @@ -464,7 +467,7 @@ intvec_\vecname: } { auli r21, r21, ha16(__per_cpu_offset) - mm r20, r20, zero, 0, LOG2_THREAD_SIZE-1 + mm r20, r20, zero, 0, LOG2_NR_CPU_IDS-1 } s2a r20, r20, r21 lw tp, r20 diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S index df19d4f3946e..3b35bb490d3e 100644 --- a/arch/tile/kernel/intvec_64.S +++ b/arch/tile/kernel/intvec_64.S @@ -132,13 +132,9 @@ intvec_\vecname: mfspr r3, SPR_SYSTEM_SAVE_K_0 /* Get &thread_info->unalign_jit_tmp[0] in r3. */ + bfexts r3, r3, 0, CPU_SHIFT-1 mm r3, zero, LOG2_THREAD_SIZE, 63 -#if THREAD_SIZE < 65536 - addli r3, r3, -(PAGE_SIZE - THREAD_INFO_UNALIGN_JIT_TMP_OFFSET) -#else - addli r3, r3, -(PAGE_SIZE/2) - addli r3, r3, -(PAGE_SIZE/2 - THREAD_INFO_UNALIGN_JIT_TMP_OFFSET) -#endif + addli r3, r3, THREAD_INFO_UNALIGN_JIT_TMP_OFFSET /* * Save r0, r1, r2 into thread_info array r3 points to @@ -365,13 +361,13 @@ intvec_\vecname: 2: /* - * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and - * the current stack top in the higher bits. So we recover - * our stack top by just masking off the low bits, then + * SYSTEM_SAVE_K_0 holds the cpu number in the high bits, and + * the current stack top in the lower bits. So we recover + * our starting stack value by sign-extending the low bits, then * point sp at the top aligned address on the actual stack page. */ mfspr r0, SPR_SYSTEM_SAVE_K_0 - mm r0, zero, LOG2_THREAD_SIZE, 63 + bfexts r0, r0, 0, CPU_SHIFT-1 0: /* @@ -393,6 +389,9 @@ intvec_\vecname: * cache line 1: r6...r13 * cache line 0: 2 x frame, r0..r5 */ +#if STACK_TOP_DELTA != 64 +#error STACK_TOP_DELTA must be 64 for assumptions here and in task_pt_regs() +#endif andi r0, r0, -64 /* @@ -690,7 +689,7 @@ intvec_\vecname: } { shl16insli r21, r21, hw1(__per_cpu_offset) - bfextu r20, r20, 0, LOG2_THREAD_SIZE-1 + bfextu r20, r20, CPU_SHIFT, 63 } shl16insli r21, r21, hw0(__per_cpu_offset) shl3add r20, r20, r21 diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c index a9db923bb9eb..24fd223df65d 100644 --- a/arch/tile/kernel/stack.c +++ b/arch/tile/kernel/stack.c @@ -197,19 +197,19 @@ static void validate_stack(struct pt_regs *regs) { int cpu = raw_smp_processor_id(); unsigned long ksp0 = get_current_ksp0(); - unsigned long ksp0_base = ksp0 - THREAD_SIZE; + unsigned long ksp0_base = ksp0 & -THREAD_SIZE; unsigned long sp = stack_pointer; if (EX1_PL(regs->ex1) == KERNEL_PL && regs->sp >= ksp0) { - pr_err("WARNING: cpu %d: kernel stack page %#lx underrun!\n" + pr_err("WARNING: cpu %d: kernel stack %#lx..%#lx underrun!\n" " sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n", - cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr); + cpu, ksp0_base, ksp0, sp, regs->sp, regs->pc, regs->lr); } else if (sp < ksp0_base + sizeof(struct thread_info)) { - pr_err("WARNING: cpu %d: kernel stack page %#lx overrun!\n" + pr_err("WARNING: cpu %d: kernel stack %#lx..%#lx overrun!\n" " sp %#lx (%#lx in caller), caller pc %#lx, lr %#lx\n", - cpu, ksp0_base, sp, regs->sp, regs->pc, regs->lr); + cpu, ksp0_base, ksp0, sp, regs->sp, regs->pc, regs->lr); } } |