diff options
Diffstat (limited to 'arch')
42 files changed, 30 insertions, 1672 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 99c11433115e..c18357f4a01a 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -527,10 +527,10 @@ config ARCH_LPC32XX select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP - select CLKSRC_MMIO + select CLKSRC_LPC32XX + select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS - select HAVE_IDE select USE_OF help Support for the NXP LPC32XX family of processors diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 3f6616b472af..55e0e3ea9cb6 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,6 +1,7 @@ generic-y += bitsperlong.h +generic-y += clkdev.h generic-y += cputime.h generic-y += current.h generic-y += early_ioremap.h diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h deleted file mode 100644 index 4e8a4b27d7c7..000000000000 --- a/arch/arm/include/asm/clkdev.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/clkdev.h - * - * Copyright (C) 2008 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Helper for the clk API to assist looking up a struct clk. - */ -#ifndef __ASM_CLKDEV_H -#define __ASM_CLKDEV_H - -#include <linux/slab.h> - -#ifndef CONFIG_COMMON_CLK -#ifdef CONFIG_HAVE_MACH_CLKDEV -#include <mach/clkdev.h> -#else -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) -#endif -#endif - -static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) -{ - return kzalloc(size, GFP_KERNEL); -} - -#endif diff --git a/arch/arm/mach-cns3xxx/Makefile.boot b/arch/arm/mach-cns3xxx/Makefile.boot deleted file mode 100644 index d079de0b6e3b..000000000000 --- a/arch/arm/mach-cns3xxx/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00C00000 diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot deleted file mode 100644 index b9862e22bf10..000000000000 --- a/arch/arm/mach-exynos/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x40008000 -params_phys-y := 0x40000100 diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index b01bdc9baf89..b2a85ba13f08 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -2,22 +2,16 @@ menuconfig ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6 select ARM_AMBA - select ARM_PATCH_PHYS_VIRT if MMU - select AUTO_ZRELADDR - select COMMON_CLK select COMMON_CLK_VERSATILE - select GENERIC_CLOCKEVENTS select HAVE_TCM select ICST select MFD_SYSCON - select MULTI_IRQ_HANDLER select PLAT_VERSATILE select POWER_RESET select POWER_RESET_VERSATILE select POWER_SUPPLY select SOC_INTEGRATOR_CM select SPARSE_IRQ - select USE_OF select VERSATILE_FPGA_IRQ help Support for ARM's Integrator platform. diff --git a/arch/arm/mach-integrator/Makefile.boot b/arch/arm/mach-integrator/Makefile.boot deleted file mode 100644 index ff0a4b5b0a82..000000000000 --- a/arch/arm/mach-integrator/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-keystone/Makefile.boot b/arch/arm/mach-keystone/Makefile.boot deleted file mode 100644 index f3835c43af61..000000000000 --- a/arch/arm/mach-keystone/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x80008000 diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile index f5db805ab958..c70709ada692 100644 --- a/arch/arm/mach-lpc32xx/Makefile +++ b/arch/arm/mach-lpc32xx/Makefile @@ -2,7 +2,6 @@ # Makefile for the linux kernel. # -obj-y := timer.o irq.o common.o serial.o clock.o +obj-y := irq.o common.o serial.o obj-y += pm.o suspend.o obj-y += phy3250.o - diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c deleted file mode 100644 index 661c8f4b2310..000000000000 --- a/arch/arm/mach-lpc32xx/clock.c +++ /dev/null @@ -1,1284 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/clock.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * LPC32xx clock management driver overview - * - * The LPC32XX contains a number of high level system clocks that can be - * generated from different sources. These system clocks are used to - * generate the CPU and bus rates and the individual peripheral clocks in - * the system. When Linux is started by the boot loader, the system - * clocks are already running. Stopping a system clock during normal - * Linux operation should never be attempted, as peripherals that require - * those clocks will quit working (ie, DRAM). - * - * The LPC32xx high level clock tree looks as follows. Clocks marked with - * an asterisk are always on and cannot be disabled. Clocks marked with - * an ampersand can only be disabled in CPU suspend mode. Clocks marked - * with a caret are always on if it is the selected clock for the SYSCLK - * source. The clock that isn't used for SYSCLK can be enabled and - * disabled normally. - * 32KHz oscillator* - * / | \ - * RTC* PLL397^ TOUCH - * / - * Main oscillator^ / - * | \ / - * | SYSCLK& - * | \ - * | \ - * USB_PLL HCLK_PLL& - * | | | - * USB host/device PCLK& | - * | | - * Peripherals - * - * The CPU and chip bus rates are derived from the HCLK PLL, which can - * generate various clock rates up to 266MHz and beyond. The internal bus - * rates (PCLK and HCLK) are generated from dividers based on the HCLK - * PLL rate. HCLK can be a ratio of 1:1, 1:2, or 1:4 or HCLK PLL rate, - * while PCLK can be 1:1 to 1:32 of HCLK PLL rate. Most peripherals high - * level clocks are based on either HCLK or PCLK, but have their own - * dividers as part of the IP itself. Because of this, the system clock - * rates should not be changed. - * - * The HCLK PLL is clocked from SYSCLK, which can be derived from the - * main oscillator or PLL397. PLL397 generates a rate that is 397 times - * the 32KHz oscillator rate. The main oscillator runs at the selected - * oscillator/crystal rate on the mosc_in pin of the LPC32xx. This rate - * is normally 13MHz, but depends on the selection of external crystals - * or oscillators. If USB operation is required, the main oscillator must - * be used in the system. - * - * Switching SYSCLK between sources during normal Linux operation is not - * supported. SYSCLK is preset in the bootloader. Because of the - * complexities of clock management during clock frequency changes, - * there are some limitations to the clock driver explained below: - * - The PLL397 and main oscillator can be enabled and disabled by the - * clk_enable() and clk_disable() functions unless SYSCLK is based - * on that clock. This allows the other oscillator that isn't driving - * the HCLK PLL to be used as another system clock that can be routed - * to an external pin. - * - The muxed SYSCLK input and HCLK_PLL rate cannot be changed with - * this driver. - * - HCLK and PCLK rates cannot be changed as part of this driver. - * - Most peripherals have their own dividers are part of the peripheral - * block. Changing SYSCLK, HCLK PLL, HCLK, or PCLK sources or rates - * will also impact the individual peripheral rates. - */ - -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/clkdev.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "clock.h" -#include "common.h" - -static DEFINE_SPINLOCK(global_clkregs_lock); - -static int usb_pll_enable, usb_pll_valid; - -static struct clk clk_armpll; -static struct clk clk_usbpll; - -/* - * Post divider values for PLLs based on selected register value - */ -static const u32 pll_postdivs[4] = {1, 2, 4, 8}; - -static unsigned long local_return_parent_rate(struct clk *clk) -{ - /* - * If a clock has a rate of 0, then it inherits it's parent - * clock rate - */ - while (clk->rate == 0) - clk = clk->parent; - - return clk->rate; -} - -/* 32KHz clock has a fixed rate and is not stoppable */ -static struct clk osc_32KHz = { - .rate = LPC32XX_CLOCK_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static int local_pll397_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_PLL397_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - } else { - /* Enable PLL397 */ - reg &= ~LPC32XX_CLKPWR_SYSCTRL_PLL397_DIS; - __raw_writel(reg, LPC32XX_CLKPWR_PLL397_CTRL); - - /* Wait for PLL397 lock */ - while (((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_PLL397_CTRL) & - LPC32XX_CLKPWR_SYSCTRL_PLL397_STS) == 0) - return -ENODEV; - } - - return 0; -} - -static int local_oscmain_enable(struct clk *clk, int enable) -{ - u32 reg; - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - reg = __raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - if (enable == 0) { - reg |= LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - } else { - /* Enable main oscillator */ - reg &= ~LPC32XX_CLKPWR_MOSC_DISABLE; - __raw_writel(reg, LPC32XX_CLKPWR_MAIN_OSC_CTRL); - - /* Wait for main oscillator to start */ - while (((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) && - time_before(jiffies, timeout)) - cpu_relax(); - - if ((__raw_readl(LPC32XX_CLKPWR_MAIN_OSC_CTRL) & - LPC32XX_CLKPWR_MOSC_DISABLE) != 0) - return -ENODEV; - } - - return 0; -} - -static struct clk osc_pll397 = { - .parent = &osc_32KHz, - .enable = local_pll397_enable, - .rate = LPC32XX_CLOCK_OSC_FREQ * 397, - .get_rate = local_return_parent_rate, -}; - -static struct clk osc_main = { - .enable = local_oscmain_enable, - .rate = LPC32XX_MAIN_OSC_FREQ, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_sys; - -/* - * Convert a PLL register value to a PLL output frequency - */ -u32 clk_get_pllrate_from_reg(u32 inputclk, u32 regval) -{ - struct clk_pll_setup pllcfg; - - pllcfg.cco_bypass_b15 = 0; - pllcfg.direct_output_b14 = 0; - pllcfg.fdbk_div_ctrl_b13 = 0; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS) != 0) - pllcfg.cco_bypass_b15 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS) != 0) - pllcfg.direct_output_b14 = 1; - if ((regval & LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK) != 0) - pllcfg.fdbk_div_ctrl_b13 = 1; - pllcfg.pll_m = 1 + ((regval >> 1) & 0xFF); - pllcfg.pll_n = 1 + ((regval >> 9) & 0x3); - pllcfg.pll_p = pll_postdivs[((regval >> 11) & 0x3)]; - - return clk_check_pll_setup(inputclk, &pllcfg); -} - -/* - * Setup the HCLK PLL with a PLL structure - */ -static u32 local_clk_pll_setup(struct clk_pll_setup *PllSetup) -{ - u32 tv, tmp = 0; - - if (PllSetup->analog_on != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POWER_UP; - if (PllSetup->cco_bypass_b15 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_CCO_BYPASS; - if (PllSetup->direct_output_b14 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_BYPASS; - if (PllSetup->fdbk_div_ctrl_b13 != 0) - tmp |= LPC32XX_CLKPWR_HCLKPLL_FDBK_SEL_FCLK; - - tv = ffs(PllSetup->pll_p) - 1; - if ((!is_power_of_2(PllSetup->pll_p)) || (tv > 3)) - return 0; - - tmp |= LPC32XX_CLKPWR_HCLKPLL_POSTDIV_2POW(tv); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PREDIV_PLUS1(PllSetup->pll_n - 1); - tmp |= LPC32XX_CLKPWR_HCLKPLL_PLLM(PllSetup->pll_m - 1); - - return tmp; -} - -/* - * Update the ARM core PLL frequency rate variable from the actual PLL setting - */ -static void local_update_armpll_rate(void) -{ - u32 clkin, pllreg; - - clkin = clk_armpll.parent->rate; - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - - clk_armpll.rate = clk_get_pllrate_from_reg(clkin, pllreg); -} - -/* - * Find a PLL configuration for the selected input frequency - */ -static u32 local_clk_find_pll_cfg(u32 pllin_freq, u32 target_freq, - struct clk_pll_setup *pllsetup) -{ - u32 ifreq, freqtol, m, n, p, fclkout; - - /* Determine frequency tolerance limits */ - freqtol = target_freq / 250; - ifreq = pllin_freq; - - /* Is direct bypass mode possible? */ - if (abs(pllin_freq - target_freq) <= freqtol) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_p = pll_postdivs[0]; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - return clk_check_pll_setup(ifreq, pllsetup); - } else if (target_freq <= ifreq) { - pllsetup->analog_on = 0; - pllsetup->cco_bypass_b15 = 1; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - pllsetup->pll_n = 1; - pllsetup->pll_m = 1; - for (p = 0; p <= 3; p++) { - pllsetup->pll_p = pll_postdivs[p]; - fclkout = clk_check_pll_setup(ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - - /* Is direct mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 1; - pllsetup->fdbk_div_ctrl_b13 = 0; - pllsetup->pll_p = pll_postdivs[0]; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - /* Compute output frequency for this value */ - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup(ifreq, - pllsetup); - if (abs(target_freq - fclkout) <= - freqtol) - return fclkout; - } - } - - /* Is integer mode possible? */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 1; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - /* Try non-integer mode */ - pllsetup->analog_on = 1; - pllsetup->cco_bypass_b15 = 0; - pllsetup->direct_output_b14 = 0; - pllsetup->fdbk_div_ctrl_b13 = 0; - for (m = 1; m <= 256; m++) { - for (n = 1; n <= 4; n++) { - for (p = 0; p < 4; p++) { - /* Compute output frequency */ - pllsetup->pll_p = pll_postdivs[p]; - pllsetup->pll_n = n; - pllsetup->pll_m = m; - fclkout = clk_check_pll_setup( - ifreq, pllsetup); - if (abs(target_freq - fclkout) <= freqtol) - return fclkout; - } - } - } - - return 0; -} - -static struct clk clk_armpll = { - .parent = &clk_sys, - .get_rate = local_return_parent_rate, -}; - -/* - * Setup the USB PLL with a PLL structure - */ -static u32 local_clk_usbpll_setup(struct clk_pll_setup *pHCLKPllSetup) -{ - u32 reg, tmp = local_clk_pll_setup(pHCLKPllSetup); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL) & ~0x1FFFF; - reg |= tmp; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - return clk_check_pll_setup(clk_usbpll.parent->rate, - pHCLKPllSetup); -} - -static int local_usbpll_enable(struct clk *clk, int enable) -{ - u32 reg; - int ret = 0; - unsigned long timeout = jiffies + msecs_to_jiffies(20); - - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN2 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - __raw_writel(reg & ~LPC32XX_CLKPWR_USBCTRL_CLK_EN1, - LPC32XX_CLKPWR_USB_CTRL); - - if (enable && usb_pll_valid && usb_pll_enable) { - ret = -ENODEV; - /* - * If the PLL rate has been previously set, then the rate - * in the PLL register is valid and can be enabled here. - * Otherwise, it needs to be enabled as part of setrate. - */ - - /* - * Gate clock into PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_CLK_EN1; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Enable PLL - */ - reg |= LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP; - __raw_writel(reg, LPC32XX_CLKPWR_USB_CTRL); - - /* - * Wait for PLL to lock - */ - while (time_before(jiffies, timeout) && (ret == -ENODEV)) { - reg = __raw_readl(LPC32XX_CLKPWR_USB_CTRL); - if (reg & LPC32XX_CLKPWR_USBCTRL_PLL_STS) - ret = 0; - else - udelay(10); - } - - /* - * Gate clock from PLL if PLL is locked - */ - if (ret == 0) { - __raw_writel(reg | LPC32XX_CLKPWR_USBCTRL_CLK_EN2, - LPC32XX_CLKPWR_USB_CTRL); - } else { - __raw_writel(reg & ~(LPC32XX_CLKPWR_USBCTRL_CLK_EN1 | - LPC32XX_CLKPWR_USBCTRL_PLL_PWRUP), - LPC32XX_CLKPWR_USB_CTRL); - } - } else if ((enable == 0) && usb_pll_valid && usb_pll_enable) { - usb_pll_valid = 0; - usb_pll_enable = 0; - } - - return ret; -} - -static unsigned long local_usbpll_round_rate(struct clk *clk, - unsigned long rate) -{ - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return 0; - - return clk_check_pll_setup(clkin, &pllsetup); -} - -static int local_usbpll_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -ENODEV; - u32 clkin, usbdiv; - struct clk_pll_setup pllsetup; - - /* - * Unlike other clocks, this clock has a KHz input rate, so bump - * it up to work with the PLL function - */ - rate = rate * 1000; - - clkin = clk->get_rate(clk->parent); - usbdiv = (__raw_readl(LPC32XX_CLKPWR_USBCLK_PDIV) & - LPC32XX_CLKPWR_USBPDIV_PLL_MASK) + 1; - clkin = clkin / usbdiv; - - /* Try to find a good rate setup */ - if (local_clk_find_pll_cfg(clkin, rate, &pllsetup) == 0) - return -EINVAL; - - /* - * Disable PLL clocks during PLL change - */ - local_usbpll_enable(clk, 0); - pllsetup.analog_on = 0; - local_clk_usbpll_setup(&pllsetup); - - /* - * Start USB PLL and check PLL status - */ - - usb_pll_valid = 1; - usb_pll_enable = 1; - - ret = local_usbpll_enable(clk, 1); - if (ret >= 0) - clk->rate = clk_check_pll_setup(clkin, &pllsetup); - - return ret; -} - -static struct clk clk_usbpll = { - .parent = &osc_main, - .set_rate = local_usbpll_set_rate, - .enable = local_usbpll_enable, - .rate = 48000, /* In KHz */ - .get_rate = local_return_parent_rate, - .round_rate = local_usbpll_round_rate, -}; - -static u32 clk_get_hclk_div(void) -{ - static const u32 hclkdivs[4] = {1, 2, 4, 4}; - return hclkdivs[LPC32XX_CLKPWR_HCLKDIV_DIV_2POW( - __raw_readl(LPC32XX_CLKPWR_HCLK_DIV))]; -} - -static struct clk clk_hclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pclk = { - .parent = &clk_armpll, - .get_rate = local_return_parent_rate, -}; - -static int local_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(clk->enable_reg); - - if (enable == 0) - tmp &= ~clk->enable_mask; - else - tmp |= clk->enable_mask; - - __raw_writel(tmp, clk->enable_reg); - - return 0; -} - -/* Peripheral clock sources */ -static struct clk clk_timer0 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer1 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER2_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_timer3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_TIMER3_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_mpwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1, - .enable_mask = LPC32XX_CLKPWR_TMRPWMCLK_MPWM_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_wdt = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_TIMER_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_WDOG_EN, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_vfp9 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DEBUG_CTRL, - .enable_mask = LPC32XX_CLKPWR_VFP_CLOCK_ENABLE_BIT, - .get_rate = local_return_parent_rate, -}; -static struct clk clk_dma = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_DMA_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_DMACLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_pwm = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_PWM_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_PWMCLK_PWM1CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM1SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM1_DIV(1) | - LPC32XX_CLKPWR_PWMCLK_PWM2CLK_EN | - LPC32XX_CLKPWR_PWMCLK_PWM2SEL_PCLK | - LPC32XX_CLKPWR_PWMCLK_PWM2_DIV(1), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart3 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART3_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart4 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART4_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart5 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART5_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_uart6 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_UART_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_UARTCLKCTRL_UART6_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C1CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2C_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2CCLK_I2C2CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2c2 = { - .parent = &clk_pclk, - .enable = local_onoff_enable, - .enable_reg = io_p2v(LPC32XX_USB_BASE + 0xFF4), - .enable_mask = 0x4, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_ssp1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_SSP_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_SSPCTRL_SSPCLK1_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_kscan = { - .parent = &osc_32KHz, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_KEY_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_KEYCLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_SLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_SEL_SLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_nand_mlc = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_NAND_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_NANDCLK_MLCCLK_EN | - LPC32XX_CLKPWR_NANDCLK_DMA_INT | - LPC32XX_CLKPWR_NANDCLK_INTSEL_MLC, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s0 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK0_EN, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_i2s1 = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_I2S_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_I2SCTRL_I2SCLK1_EN | - LPC32XX_CLKPWR_I2SCTRL_I2S1_USE_DMA, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_net = { - .parent = &clk_hclk, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MACCLK_CTRL, - .enable_mask = (LPC32XX_CLKPWR_MACCTRL_DMACLK_EN | - LPC32XX_CLKPWR_MACCTRL_MMIOCLK_EN | - LPC32XX_CLKPWR_MACCTRL_HRCCLK_EN), - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_rtc = { - .parent = &osc_32KHz, - .rate = 1, /* 1 Hz */ - .get_rate = local_return_parent_rate, -}; - -static int local_usb_enable(struct clk *clk, int enable) -{ - u32 tmp; - - if (enable) { - /* Set up I2C pull levels */ - tmp = __raw_readl(LPC32XX_CLKPWR_I2C_CLK_CTRL); - tmp |= LPC32XX_CLKPWR_I2CCLK_USBI2CHI_DRIVE; - __raw_writel(tmp, LPC32XX_CLKPWR_I2C_CLK_CTRL); - } - - return local_onoff_enable(clk, enable); -} - -static struct clk clk_usbd = { - .parent = &clk_usbpll, - .enable = local_usb_enable, - .enable_reg = LPC32XX_CLKPWR_USB_CTRL, - .enable_mask = LPC32XX_CLKPWR_USBCTRL_HCLK_EN, - .get_rate = local_return_parent_rate, -}; - -#define OTG_ALWAYS_MASK (LPC32XX_USB_OTG_OTG_CLOCK_ON | \ - LPC32XX_USB_OTG_I2C_CLOCK_ON) - -static int local_usb_otg_enable(struct clk *clk, int enable) -{ - int to = 1000; - - if (enable) { - __raw_writel(clk->enable_mask, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - clk->enable_mask) != clk->enable_mask) && (to > 0)) - to--; - } else { - __raw_writel(OTG_ALWAYS_MASK, clk->enable_reg); - - while (((__raw_readl(LPC32XX_USB_OTG_CLK_STAT) & - OTG_ALWAYS_MASK) != OTG_ALWAYS_MASK) && (to > 0)) - to--; - } - - if (to) - return 0; - else - return -1; -} - -static struct clk clk_usb_otg_dev = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_DEV_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static struct clk clk_usb_otg_host = { - .parent = &clk_usbpll, - .enable = local_usb_otg_enable, - .enable_reg = LPC32XX_USB_OTG_CLK_CTRL, - .enable_mask = LPC32XX_USB_OTG_AHB_M_CLOCK_ON | - LPC32XX_USB_OTG_OTG_CLOCK_ON | - LPC32XX_USB_OTG_HOST_CLOCK_ON | - LPC32XX_USB_OTG_I2C_CLOCK_ON, - .get_rate = local_return_parent_rate, -}; - -static int tsc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - /* Make sure 32KHz clock is the selected clock */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp &= ~LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_tsc = { - .parent = &osc_32KHz, - .enable = tsc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int adc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - u32 divider; - - /* Use PERIPH_CLOCK */ - tmp = __raw_readl(LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - tmp |= LPC32XX_CLKPWR_ADCCTRL1_PCLK_SEL; - /* - * Set clock divider so that we have equal to or less than - * 4.5MHz clock at ADC - */ - divider = clk->get_rate(clk) / 4500000 + 1; - tmp |= divider; - __raw_writel(tmp, LPC32XX_CLKPWR_ADC_CLK_CTRL_1); - - /* synchronize rate of this clock w/ actual HW setting */ - clk->rate = clk->get_rate(clk->parent) / divider; - - if (enable == 0) - __raw_writel(0, clk->enable_reg); - else - __raw_writel(clk->enable_mask, clk->enable_reg); - - return 0; -} - -static struct clk clk_adc = { - .parent = &clk_pclk, - .enable = adc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_ADC_CLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_ADC32CLKCTRL_CLK_EN, - .get_rate = local_return_parent_rate, -}; - -static int mmc_onoff_enable(struct clk *clk, int enable) -{ - u32 tmp; - - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~(LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PIN_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO0_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO1_DIS | - LPC32XX_CLKPWR_MSCARD_MSDIO23_DIS); - - /* If rate is 0, disable clock */ - if (enable != 0) - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_EN | - LPC32XX_CLKPWR_MSCARD_MSDIO_PU_EN; - - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static unsigned long mmc_get_rate(struct clk *clk) -{ - u32 div, rate, oldclk; - - /* The MMC clock must be on when accessing an MMC register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_MSCARD_SDCARD_EN, - LPC32XX_CLKPWR_MS_CTRL); - div = __raw_readl(LPC32XX_CLKPWR_MS_CTRL); - __raw_writel(oldclk, LPC32XX_CLKPWR_MS_CTRL); - - /* Get the parent clock rate */ - rate = clk->parent->get_rate(clk->parent); - - /* Get the MMC controller clock divider value */ - div = div & LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - - if (!div) - div = 1; - - return rate / div; -} - -static unsigned long mmc_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long div, prate; - - /* Get the parent clock rate */ - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - return prate; - - div = prate / rate; - if (div > 0xf) - div = 0xf; - - return prate / div; -} - -static int mmc_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp; - unsigned long prate, div, crate = mmc_round_rate(clk, rate); - - prate = clk->parent->get_rate(clk->parent); - - div = prate / crate; - - /* The MMC clock must be on when accessing an MMC register */ - tmp = __raw_readl(LPC32XX_CLKPWR_MS_CTRL) & - ~LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(0xf); - tmp |= LPC32XX_CLKPWR_MSCARD_SDCARD_DIV(div) | - LPC32XX_CLKPWR_MSCARD_SDCARD_EN; - __raw_writel(tmp, LPC32XX_CLKPWR_MS_CTRL); - - return 0; -} - -static struct clk clk_mmc = { - .parent = &clk_armpll, - .set_rate = mmc_set_rate, - .get_rate = mmc_get_rate, - .round_rate = mmc_round_rate, - .enable = mmc_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_MS_CTRL, - .enable_mask = LPC32XX_CLKPWR_MSCARD_SDCARD_EN, -}; - -static unsigned long clcd_get_rate(struct clk *clk) -{ - u32 tmp, div, rate, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - rate = clk->parent->get_rate(clk->parent); - - /* Only supports internal clocking */ - if (tmp & TIM2_BCD) - return rate; - - div = (tmp & 0x1F) | ((tmp & 0xF8) >> 22); - tmp = rate / (2 + div); - - return tmp; -} - -static int clcd_set_rate(struct clk *clk, unsigned long rate) -{ - u32 tmp, prate, div, oldclk; - - /* The LCD clock must be on when accessing an LCD register */ - oldclk = __raw_readl(LPC32XX_CLKPWR_LCDCLK_CTRL); - __raw_writel(oldclk | LPC32XX_CLKPWR_LCDCTRL_CLK_EN, - LPC32XX_CLKPWR_LCDCLK_CTRL); - - tmp = __raw_readl(io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)) | TIM2_BCD; - prate = clk->parent->get_rate(clk->parent); - - if (rate < prate) { - /* Find closest divider */ - div = prate / rate; - if (div >= 2) { - div -= 2; - tmp &= ~TIM2_BCD; - } - - tmp &= ~(0xF800001F); - tmp |= (div & 0x1F); - tmp |= (((div >> 5) & 0x1F) << 27); - } - - __raw_writel(tmp, io_p2v(LPC32XX_LCD_BASE + CLCD_TIM2)); - __raw_writel(oldclk, LPC32XX_CLKPWR_LCDCLK_CTRL); - - return 0; -} - -static unsigned long clcd_round_rate(struct clk *clk, unsigned long rate) -{ - u32 prate, div; - - prate = clk->parent->get_rate(clk->parent); - - if (rate >= prate) - rate = prate; - else { - div = prate / rate; - if (div > 0x3ff) - div = 0x3ff; - - rate = prate / div; - } - - return rate; -} - -static struct clk clk_lcd = { - .parent = &clk_hclk, - .set_rate = clcd_set_rate, - .get_rate = clcd_get_rate, - .round_rate = clcd_round_rate, - .enable = local_onoff_enable, - .enable_reg = LPC32XX_CLKPWR_LCDCLK_CTRL, - .enable_mask = LPC32XX_CLKPWR_LCDCTRL_CLK_EN, -}; - -static void local_clk_disable(struct clk *clk) -{ - /* Don't attempt to disable clock if it has no users */ - if (clk->usecount > 0) { - clk->usecount--; - - /* Only disable clock when it has no more users */ - if ((clk->usecount == 0) && (clk->enable)) - clk->enable(clk, 0); - - /* Check parent clocks, they may need to be disabled too */ - if (clk->parent) - local_clk_disable(clk->parent); - } -} - -static int local_clk_enable(struct clk *clk) -{ - int ret = 0; - - /* Enable parent clocks first and update use counts */ - if (clk->parent) - ret = local_clk_enable(clk->parent); - - if (!ret) { - /* Only enable clock if it's currently disabled */ - if ((clk->usecount == 0) && (clk->enable)) - ret = clk->enable(clk, 1); - - if (!ret) - clk->usecount++; - else if (clk->parent) - local_clk_disable(clk->parent); - } - - return ret; -} - -/* - * clk_enable - inform the system when the clock source should be running. - */ -int clk_enable(struct clk *clk) -{ - int ret; - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - ret = local_clk_enable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); - - return ret; -} -EXPORT_SYMBOL(clk_enable); - -/* - * clk_disable - inform the system when the clock source is no longer required - */ -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&global_clkregs_lock, flags); - local_clk_disable(clk); - spin_unlock_irqrestore(&global_clkregs_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -/* - * clk_get_rate - obtain the current clock rate (in Hz) for a clock source - */ -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->get_rate(clk); -} -EXPORT_SYMBOL(clk_get_rate); - -/* - * clk_set_rate - set the clock rate for a clock source - */ -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EINVAL; - - /* - * Most system clocks can only be enabled or disabled, with - * the actual rate set as part of the peripheral dividers - * instead of high level clock control - */ - if (clk->set_rate) - ret = clk->set_rate(clk, rate); - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -/* - * clk_round_rate - adjust a rate to the exact rate a clock can provide - */ -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (clk->round_rate) - rate = clk->round_rate(clk, rate); - else - rate = clk->get_rate(clk); - - return rate; -} -EXPORT_SYMBOL(clk_round_rate); - -/* - * clk_set_parent - set the parent clock source for this clock - */ -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - /* Clock re-parenting is not supported */ - return -EINVAL; -} -EXPORT_SYMBOL(clk_set_parent); - -/* - * clk_get_parent - get the parent clock source for this clock - */ -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -static struct clk_lookup lookups[] = { - CLKDEV_INIT(NULL, "osc_32KHz", &osc_32KHz), - CLKDEV_INIT(NULL, "osc_pll397", &osc_pll397), - CLKDEV_INIT(NULL, "osc_main", &osc_main), - CLKDEV_INIT(NULL, "sys_ck", &clk_sys), - CLKDEV_INIT(NULL, "arm_pll_ck", &clk_armpll), - CLKDEV_INIT(NULL, "ck_pll5", &clk_usbpll), - CLKDEV_INIT(NULL, "hclk_ck", &clk_hclk), - CLKDEV_INIT(NULL, "pclk_ck", &clk_pclk), - CLKDEV_INIT(NULL, "timer0_ck", &clk_timer0), - CLKDEV_INIT(NULL, "timer1_ck", &clk_timer1), - CLKDEV_INIT(NULL, "timer2_ck", &clk_timer2), - CLKDEV_INIT(NULL, "timer3_ck", &clk_timer3), - CLKDEV_INIT(NULL, "vfp9_ck", &clk_vfp9), - CLKDEV_INIT("pl08xdmac", NULL, &clk_dma), - CLKDEV_INIT("4003c000.watchdog", NULL, &clk_wdt), - CLKDEV_INIT("4005c000.pwm", NULL, &clk_pwm), - CLKDEV_INIT("400e8000.mpwm", NULL, &clk_mpwm), - CLKDEV_INIT(NULL, "uart3_ck", &clk_uart3), - CLKDEV_INIT(NULL, "uart4_ck", &clk_uart4), - CLKDEV_INIT(NULL, "uart5_ck", &clk_uart5), - CLKDEV_INIT(NULL, "uart6_ck", &clk_uart6), - CLKDEV_INIT("400a0000.i2c", NULL, &clk_i2c0), - CLKDEV_INIT("400a8000.i2c", NULL, &clk_i2c1), - CLKDEV_INIT("31020300.i2c", NULL, &clk_i2c2), - CLKDEV_INIT("dev:ssp0", NULL, &clk_ssp0), - CLKDEV_INIT("dev:ssp1", NULL, &clk_ssp1), - CLKDEV_INIT("40050000.key", NULL, &clk_kscan), - CLKDEV_INIT("20020000.flash", NULL, &clk_nand), - CLKDEV_INIT("200a8000.flash", NULL, &clk_nand_mlc), - CLKDEV_INIT("40048000.adc", NULL, &clk_adc), - CLKDEV_INIT(NULL, "i2s0_ck", &clk_i2s0), - CLKDEV_INIT(NULL, "i2s1_ck", &clk_i2s1), - CLKDEV_INIT("40048000.tsc", NULL, &clk_tsc), - CLKDEV_INIT("20098000.sd", NULL, &clk_mmc), - CLKDEV_INIT("31060000.ethernet", NULL, &clk_net), - CLKDEV_INIT("dev:clcd", NULL, &clk_lcd), - CLKDEV_INIT("31020000.usbd", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.ohci", "ck_usbd", &clk_usbd), - CLKDEV_INIT("31020000.usbd", "ck_usb_otg", &clk_usb_otg_dev), - CLKDEV_INIT("31020000.ohci", "ck_usb_otg", &clk_usb_otg_host), - CLKDEV_INIT("lpc32xx_rtc", NULL, &clk_rtc), -}; - -static int __init clk_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - /* - * Setup muxed SYSCLK for HCLK PLL base -this selects the - * parent clock used for the ARM PLL and is used to derive - * the many system clock rates in the device. - */ - if (clk_is_sysclk_mainosc() != 0) - clk_sys.parent = &osc_main; - else - clk_sys.parent = &osc_pll397; - - clk_sys.rate = clk_sys.parent->rate; - - /* Compute the current ARM PLL and USB PLL frequencies */ - local_update_armpll_rate(); - - /* Compute HCLK and PCLK bus rates */ - clk_hclk.rate = clk_hclk.parent->rate / clk_get_hclk_div(); - clk_pclk.rate = clk_pclk.parent->rate / clk_get_pclk_div(); - - /* - * Enable system clocks - this step is somewhat formal, as the - * clocks are already running, but it does get the clock data - * inline with the actual system state. Never disable these - * clocks as they will only stop if the system is going to sleep. - * In that case, the chip/system power management functions will - * handle clock gating. - */ - if (clk_enable(&clk_hclk) || clk_enable(&clk_pclk)) - printk(KERN_ERR "Error enabling system HCLK and PCLK\n"); - - /* - * Timers 0 and 1 were enabled and are being used by the high - * resolution tick function prior to this driver being initialized. - * Tag them now as used. - */ - if (clk_enable(&clk_timer0) || clk_enable(&clk_timer1)) - printk(KERN_ERR "Error enabling timer tick clocks\n"); - - return 0; -} -core_initcall(clk_init); - diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index e6f03783ad73..b2f9e226febe 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -36,7 +36,6 @@ #include <linux/clk.h> #include <linux/mtd/lpc32xx_slc.h> #include <linux/mtd/lpc32xx_mlc.h> -#include <linux/platform_data/gpio-lpc32xx.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -48,13 +47,6 @@ #include "common.h" /* - * Mapped GPIOLIB GPIOs - */ -#define LCD_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 0) -#define BKL_POWER_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 4) -#define MMC_PWR_ENABLE_GPIO LPC32XX_GPIO(LPC32XX_GPO_P3_GRP, 5) - -/* * AMBA LCD controller */ static struct clcd_panel conn_lcd_panel = { @@ -97,20 +89,6 @@ static int lpc32xx_clcd_setup(struct clcd_fb *fb) fb->fb.fix.smem_len = PANEL_SIZE; fb->panel = &conn_lcd_panel; - if (gpio_request(LCD_POWER_GPIO, "LCD power")) - printk(KERN_ERR "Error requesting gpio %u", - LCD_POWER_GPIO); - else if (gpio_direction_output(LCD_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - LCD_POWER_GPIO); - - if (gpio_request(BKL_POWER_GPIO, "LCD backlight power")) - printk(KERN_ERR "Error requesting gpio %u", - BKL_POWER_GPIO); - else if (gpio_direction_output(BKL_POWER_GPIO, 1)) - printk(KERN_ERR "Error setting gpio %u to output", - BKL_POWER_GPIO); - return 0; } @@ -126,29 +104,10 @@ static void lpc32xx_clcd_remove(struct clcd_fb *fb) fb->fb.fix.smem_start); } -/* - * On some early LCD modules (1307.0), the backlight logic is inverted. - * For those board variants, swap the disable and enable states for - * BKL_POWER_GPIO. -*/ -static void clcd_disable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 0); - gpio_set_value(LCD_POWER_GPIO, 0); -} - -static void clcd_enable(struct clcd_fb *fb) -{ - gpio_set_value(BKL_POWER_GPIO, 1); - gpio_set_value(LCD_POWER_GPIO, 1); -} - static struct clcd_board lpc32xx_clcd_data = { .name = "Phytec LCD", .check = clcdfb_check, .decode = clcdfb_decode, - .disable = clcd_disable, - .enable = clcd_enable, .setup = lpc32xx_clcd_setup, .mmap = lpc32xx_clcd_mmap, .remove = lpc32xx_clcd_remove, @@ -187,20 +146,9 @@ static struct pl08x_platform_data pl08x_pd = { .mem_buses = PL08X_AHB1, }; -static int mmc_handle_ios(struct device *dev, struct mmc_ios *ios) -{ - /* Only on and off are supported */ - if (ios->power_mode == MMC_POWER_OFF) - gpio_set_value(MMC_PWR_ENABLE_GPIO, 0); - else - gpio_set_value(MMC_PWR_ENABLE_GPIO, 1); - return 0; -} - static struct mmci_platform_data lpc32xx_mmci_data = { .ocr_mask = MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | MMC_VDD_33_34, - .ios_handler = mmc_handle_ios, }; static struct lpc32xx_slc_platform_data lpc32xx_slc_data = { @@ -259,7 +207,6 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)") .atag_offset = 0x100, .map_io = lpc32xx_map_io, .init_irq = lpc32xx_init_irq, - .init_time = lpc32xx_timer_init, .init_machine = lpc3250_machine_init, .dt_compat = lpc32xx_dt_compat, MACHINE_END diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c index 05621a29fba2..1931229a1eaa 100644 --- a/arch/arm/mach-lpc32xx/serial.c +++ b/arch/arm/mach-lpc32xx/serial.c @@ -76,9 +76,6 @@ void __init lpc32xx_serial_init(void) unsigned int puart; int i, j; - /* UART clocks are off, let clock driver manage them */ - __raw_writel(0, LPC32XX_CLKPWR_UART_CLK_CTRL); - for (i = 0; i < ARRAY_SIZE(uartinit_data); i++) { clk = clk_get(NULL, uartinit_data[i].uart_ck_name); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c deleted file mode 100644 index ff3499d1fb1a..000000000000 --- a/arch/arm/mach-lpc32xx/timer.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/timer.c - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2009 - 2010 NXP Semiconductors - * Copyright (C) 2009 Fontys University of Applied Sciences, Eindhoven - * Ed Schouten <e.schouten@fontys.nl> - * Laurens Timmermans <l.timmermans@fontys.nl> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/time.h> -#include <linux/err.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> - -#include <mach/hardware.h> -#include <mach/platform.h> -#include "common.h" - -static int lpc32xx_clkevt_next_event(unsigned long delta, - struct clock_event_device *dev) -{ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(delta, LPC32XX_TIMER_PR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - - return 0; -} - -static int lpc32xx_shutdown(struct clock_event_device *evt) -{ - /* - * Disable the timer. When using oneshot, we must also - * disable the timer to wait for the first call to - * set_next_event(). - */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - return 0; -} - -static struct clock_event_device lpc32xx_clkevt = { - .name = "lpc32xx_clkevt", - .features = CLOCK_EVT_FEAT_ONESHOT, - .rating = 300, - .set_next_event = lpc32xx_clkevt_next_event, - .set_state_shutdown = lpc32xx_shutdown, - .set_state_oneshot = lpc32xx_shutdown, -}; - -static irqreturn_t lpc32xx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &lpc32xx_clkevt; - - /* Clear match */ - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction lpc32xx_timer_irq = { - .name = "LPC32XX Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = lpc32xx_timer_interrupt, -}; - -/* - * The clock management driver isn't initialized at this point, so the - * clocks need to be enabled here manually and then tagged as used in - * the clock driver initialization - */ -void __init lpc32xx_timer_init(void) -{ - u32 clkrate, pllreg; - - /* Enable timer clock */ - __raw_writel(LPC32XX_CLKPWR_TMRPWMCLK_TIMER0_EN | - LPC32XX_CLKPWR_TMRPWMCLK_TIMER1_EN, - LPC32XX_CLKPWR_TIMERS_PWMS_CLK_CTRL_1); - - /* - * The clock driver isn't initialized at this point. So determine if - * the SYSCLK is driven from the PLL397 or main oscillator and then use - * it to compute the PLL frequency and the PCLK divider to get the base - * timer rates. This rate is needed to compute the tick rate. - */ - if (clk_is_sysclk_mainosc() != 0) - clkrate = LPC32XX_MAIN_OSC_FREQ; - else - clkrate = 397 * LPC32XX_CLOCK_OSC_FREQ; - - /* Get ARM HCLKPLL register and convert it into a frequency */ - pllreg = __raw_readl(LPC32XX_CLKPWR_HCLKPLL_CTRL) & 0x1FFFF; - clkrate = clk_get_pllrate_from_reg(clkrate, pllreg); - - /* Get PCLK divider and divide ARM PLL clock by it to get timer rate */ - clkrate = clkrate / clk_get_pclk_div(); - - /* Initial timer setup */ - __raw_writel(0, LPC32XX_TIMER_TCR(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MTCH_BIT(0), - LPC32XX_TIMER_IR(LPC32XX_TIMER0_BASE)); - __raw_writel(1, LPC32XX_TIMER_MR0(LPC32XX_TIMER0_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_MCR_MTCH(0) | - LPC32XX_TIMER_CNTR_MCR_STOP(0) | - LPC32XX_TIMER_CNTR_MCR_RESET(0), - LPC32XX_TIMER_MCR(LPC32XX_TIMER0_BASE)); - - /* Setup tick interrupt */ - setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq); - - /* Setup the clockevent structure. */ - lpc32xx_clkevt.cpumask = cpumask_of(0); - clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1); - - /* Use timer1 as clock source. */ - __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_PR(LPC32XX_TIMER1_BASE)); - __raw_writel(0, LPC32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); - __raw_writel(LPC32XX_TIMER_CNTR_TCR_EN, - LPC32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - - clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE), - "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up); -} diff --git a/arch/arm/mach-mmp/Makefile.boot b/arch/arm/mach-mmp/Makefile.boot deleted file mode 100644 index 5edf03e2beed..000000000000 --- a/arch/arm/mach-mmp/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ - zreladdr-y += 0x00008000 diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index a32575fa3fba..c32f85559c65 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_MV78XX0 - bool "Marvell MV78xx0" if ARCH_MULTI_V5 + bool "Marvell MV78xx0" + depends on ARCH_MULTI_V5 select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select MVEBU_MBUS diff --git a/arch/arm/mach-mv78xx0/Makefile.boot b/arch/arm/mach-mv78xx0/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-mv78xx0/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index f9597b701028..46c742d3bd41 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -140,6 +140,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) panic("Cannot find 'marvell,bootrom' compatible node"); err = of_address_to_resource(node, 0, &res); + of_node_put(node); if (err < 0) panic("Cannot get 'bootrom' node address"); diff --git a/arch/arm/mach-netx/Kconfig b/arch/arm/mach-netx/Kconfig index 3d90ef19be2b..2da8e5dfcf24 100644 --- a/arch/arm/mach-netx/Kconfig +++ b/arch/arm/mach-netx/Kconfig @@ -3,20 +3,17 @@ menu "NetX Implementations" config MACH_NXDKN bool "Enable Hilscher nxdkn Eval Board support" - depends on ARCH_NETX help Board support for the Hilscher NetX Eval Board config MACH_NXDB500 bool "Enable Hilscher nxdb500 Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxdb500 Eval Board config MACH_NXEB500HMI bool "Enable Hilscher nxeb500hmi Eval Board support" - depends on ARCH_NETX select ARM_AMBA help Board support for the Hilscher nxeb500hmi Eval Board diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot deleted file mode 100644 index e69de29bb2d1..000000000000 --- a/arch/arm/mach-nspire/Makefile.boot +++ /dev/null diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot deleted file mode 100644 index b03e562acc60..000000000000 --- a/arch/arm/mach-omap2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x80008000 -params_phys-y := 0x80000100 -initrd_phys-y := 0x80800000 diff --git a/arch/arm/mach-orion5x/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-orion5x/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot deleted file mode 100644 index c77a4883a4ee..000000000000 --- a/arch/arm/mach-prima2/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-realview/Makefile.boot b/arch/arm/mach-realview/Makefile.boot deleted file mode 100644 index d2c3d788f688..000000000000 --- a/arch/arm/mach-realview/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -ifeq ($(CONFIG_REALVIEW_HIGH_PHYS_OFFSET),y) - zreladdr-y += 0x70008000 -params_phys-y := 0x70000100 -initrd_phys-y := 0x70800000 -else - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 -endif diff --git a/arch/arm/mach-s3c64xx/Makefile.boot b/arch/arm/mach-s3c64xx/Makefile.boot deleted file mode 100644 index c642333af3ed..000000000000 --- a/arch/arm/mach-s3c64xx/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y += 0x50008000 -params_phys-y := 0x50000100 diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index cd5f171f83ce..aa0b1a177d3e 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -99,6 +99,4 @@ config ARCH_SH73A0 bool "SH-Mobile AG5 (R8A73A00)" select ARCH_RMOBILE select RENESAS_INTC_IRQPIN - -comment "Renesas ARM SoCs System Configuration" endif diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index b3a4ed5289ec..5464b7a75e30 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -11,7 +11,8 @@ extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); extern void shmobile_boot_scu(void); -extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); +extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); extern int shmobile_smp_scu_cpu_kill(unsigned int cpu); extern struct platform_suspend_ops shmobile_suspend_ops; @@ -30,8 +31,6 @@ int shmobile_cpufreq_init(void); static inline int shmobile_cpufreq_init(void) { return 0; } #endif -extern void __iomem *shmobile_scu_base; - static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c index 57fbff024dcd..634d701c56a7 100644 --- a/arch/arm/mach-shmobile/cpufreq.c +++ b/arch/arm/mach-shmobile/cpufreq.c @@ -10,6 +10,8 @@ #include <linux/platform_device.h> +#include "common.h" + int __init shmobile_cpufreq_init(void) { platform_device_register_simple("cpufreq-dt", -1, NULL, 0); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index 5e503d91ad70..936d7011c314 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -27,7 +27,7 @@ */ ENTRY(shmobile_boot_scu) @ r0 = SCU base address - mrc p15, 0, r1, c0, c0, 5 @ read MIPDR + mrc p15, 0, r1, c0, c0, 5 @ read MPIDR and r1, r1, #3 @ mask out cpu ID lsl r1, r1, #3 @ we will shift by cpu_id * 8 bits ldr r2, [r0, #8] @ SCU Power Status Register diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 081a097c9219..8d478f1da265 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -18,7 +18,8 @@ #include "common.h" -void __iomem *shmobile_scu_base; +static phys_addr_t shmobile_scu_base_phys; +static void __iomem *shmobile_scu_base; static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) @@ -29,7 +30,7 @@ static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, case CPU_UP_PREPARE: /* For this particular CPU register SCU SMP boot vector */ shmobile_smp_hook(cpu, virt_to_phys(shmobile_boot_scu), - (unsigned long)shmobile_scu_base); + shmobile_scu_base_phys); break; }; @@ -40,12 +41,15 @@ static struct notifier_block shmobile_smp_scu_notifier = { .notifier_call = shmobile_smp_scu_notifier_call, }; -void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) +void __init shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, + unsigned int max_cpus) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); /* enable SCU and cache coherency on booting CPU */ + shmobile_scu_base_phys = scu_base_phys; + shmobile_scu_base = ioremap(scu_base_phys, PAGE_SIZE); scu_enable(shmobile_scu_base); scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL); diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 9eccde3c7b13..6d0ebdfb03a2 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -182,8 +182,6 @@ static int __init rcar_gen2_scan_mem(unsigned long node, const char *uname, return 0; } -struct cma *rcar_gen2_dma_contiguous; - void __init rcar_gen2_reserve(void) { struct memory_reserve_config mrc; @@ -194,8 +192,11 @@ void __init rcar_gen2_reserve(void) of_scan_flat_dt(rcar_gen2_scan_mem, &mrc); #ifdef CONFIG_DMA_CMA - if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) + if (mrc.size && memblock_is_region_memory(mrc.base, mrc.size)) { + static struct cma *rcar_gen2_dma_contiguous; + dma_contiguous_reserve_area(mrc.size, mrc.base, 0, &rcar_gen2_dma_contiguous, true); + } #endif } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index adbac6963f2b..4dfafd845452 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -45,8 +45,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus) } /* setup EMEV2 specific SCU bits */ - shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(EMEV2_SCU_BASE, max_cpus); } const struct smp_operations emev2_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index 0b024a9dbd43..f5c31fbc10b2 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -94,8 +94,7 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_boot_vector), AVECR); /* setup r8a7779 specific SCU bits */ - shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(R8A7779_SCU_BASE, max_cpus); r8a7779_pm_init(); diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index ee1a4b70604b..41137404382e 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -52,8 +52,7 @@ static void __init sh73a0_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(__pa(shmobile_boot_vector), SBAR); /* setup sh73a0 specific SCU bits */ - shmobile_scu_base = IOMEM(SH73A0_SCU_BASE); - shmobile_smp_scu_prepare_cpus(max_cpus); + shmobile_smp_scu_prepare_cpus(SH73A0_SCU_BASE, max_cpus); } const struct smp_operations sh73a0_smp_ops __initconst = { diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c index 5d92b5dd486b..74b30bade2c1 100644 --- a/arch/arm/mach-shmobile/suspend.c +++ b/arch/arm/mach-shmobile/suspend.c @@ -17,6 +17,8 @@ #include <asm/io.h> #include <asm/system_misc.h> +#include "common.h" + static int shmobile_suspend_default_enter(suspend_state_t suspend_state) { cpu_do_idle(); diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index c17d4d3881ff..ad008e4b0c49 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -18,6 +18,8 @@ #include <linux/delay.h> #include <linux/of_address.h> +#include "common.h" + static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, unsigned int mult, unsigned int div) { diff --git a/arch/arm/mach-spear/Makefile.boot b/arch/arm/mach-spear/Makefile.boot deleted file mode 100644 index 4674a4c221db..000000000000 --- a/arch/arm/mach-spear/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot deleted file mode 100644 index 87811de0bd94..000000000000 --- a/arch/arm/mach-u300/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ - zreladdr-y += 0x48008000 -params_phys-y := 0x48000100 -# This isn't used. -#initrd_phys-y := 0x48800000 diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-ux500/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-zynq/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot deleted file mode 100644 index 760a0efe7580..000000000000 --- a/arch/arm/mach-zynq/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 diff --git a/arch/arm/plat-versatile/Kconfig b/arch/arm/plat-versatile/Kconfig index 49b8ef91584a..98b9b8e9f698 100644 --- a/arch/arm/plat-versatile/Kconfig +++ b/arch/arm/plat-versatile/Kconfig @@ -1,8 +1,5 @@ if PLAT_VERSATILE -config PLAT_VERSATILE_CLOCK - bool - config PLAT_VERSATILE_SCHED_CLOCK bool diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index 03c4900ac3f4..bff3ba889882 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,5 +1,4 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -obj-$(CONFIG_PLAT_VERSATILE_CLOCK) += clock.o obj-$(CONFIG_PLAT_VERSATILE_SCHED_CLOCK) += sched-clock.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/plat-versatile/clock.c b/arch/arm/plat-versatile/clock.c deleted file mode 100644 index 5c8b6564fdc2..000000000000 --- a/arch/arm/plat-versatile/clock.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/arm/plat-versatile/clock.c - * - * Copyright (C) 2004 ARM Limited. - * Written by Deep Blue Solutions Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/clk.h> -#include <linux/mutex.h> - -#include <asm/hardware/icst.h> - -#include <mach/clkdev.h> - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - long ret = -EIO; - if (clk->ops && clk->ops->round) - ret = clk->ops->round(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret = -EIO; - if (clk->ops && clk->ops->set) - ret = clk->ops->set(clk, rate); - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -long icst_clk_round(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - vco = icst_hz_to_vco(clk->params, rate); - return icst_hz(clk->params, vco); -} -EXPORT_SYMBOL(icst_clk_round); - -int icst_clk_set(struct clk *clk, unsigned long rate) -{ - struct icst_vco vco; - - vco = icst_hz_to_vco(clk->params, rate); - clk->rate = icst_hz(clk->params, vco); - clk->ops->setvco(clk, vco); - - return 0; -} -EXPORT_SYMBOL(icst_clk_set); |