diff options
Diffstat (limited to 'arch')
462 files changed, 22177 insertions, 11981 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index 8d24bacaa61e..26b0e2397a57 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -175,4 +175,7 @@ config HAVE_ARCH_JUMP_LABEL config HAVE_ARCH_MUTEX_CPU_RELAX bool +config HAVE_RCU_TABLE_FREE + bool + source "kernel/gcov/Kconfig" diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 9808998cc073..e3a82775f9da 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -12,6 +12,7 @@ config ALPHA select GENERIC_IRQ_PROBE select AUTO_IRQ_AFFINITY if SMP select GENERIC_IRQ_SHOW + select ARCH_WANT_OPTIONAL_GPIOLIB help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, @@ -51,6 +52,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_CMOS_UPDATE def_bool y +config GENERIC_GPIO + def_bool y + config ZONE_DMA bool default y diff --git a/arch/alpha/include/asm/gpio.h b/arch/alpha/include/asm/gpio.h new file mode 100644 index 000000000000..7dc6a6343c06 --- /dev/null +++ b/arch/alpha/include/asm/gpio.h @@ -0,0 +1,55 @@ +/* + * Generic GPIO API implementation for Alpha. + * + * A stright copy of that for PowerPC which was: + * + * Copyright (c) 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _ASM_ALPHA_GPIO_H +#define _ASM_ALPHA_GPIO_H + +#include <linux/errno.h> +#include <asm-generic/gpio.h> + +#ifdef CONFIG_GPIOLIB + +/* + * We don't (yet) implement inlined/rapid versions for on-chip gpios. + * Just call gpiolib. + */ +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return __gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* _ASM_ALPHA_GPIO_H */ diff --git a/arch/alpha/include/asm/smp.h b/arch/alpha/include/asm/smp.h index 3f390e8cc0b3..c46e714aa3e0 100644 --- a/arch/alpha/include/asm/smp.h +++ b/arch/alpha/include/asm/smp.h @@ -39,8 +39,6 @@ struct cpuinfo_alpha { extern struct cpuinfo_alpha cpu_data[NR_CPUS]; -#define PROC_CHANGE_PENALTY 20 - #define hard_smp_processor_id() __hard_smp_processor_id() #define raw_smp_processor_id() (current_thread_info()->cpu) diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 3ec35066f1dc..838eac128409 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -121,7 +121,7 @@ common_shutdown_1(void *generic_ptr) /* Wait for the secondaries to halt. */ set_cpu_present(boot_cpuid, false); set_cpu_possible(boot_cpuid, false); - while (cpus_weight(cpu_present_map)) + while (cpumask_weight(cpu_present_mask)) barrier(); #endif diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index edbddcbd5bc6..cc0fd862cf26 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -1257,7 +1257,7 @@ show_cpuinfo(struct seq_file *f, void *slot) #ifdef CONFIG_SMP seq_printf(f, "cpus active\t\t: %u\n" "cpu active mask\t\t: %016lx\n", - num_online_cpus(), cpus_addr(cpu_possible_map)[0]); + num_online_cpus(), cpumask_bits(cpu_possible_mask)[0]); #endif show_cache_size (f, "L1 Icache", alpha_l1i_cacheshape); diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 5a621c6d22ab..d739703608fc 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -451,7 +451,7 @@ setup_smp(void) } printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_map = %lx\n", - smp_num_probed, cpu_present_map.bits[0]); + smp_num_probed, cpumask_bits(cpu_present_mask)[0]); } /* @@ -629,8 +629,9 @@ smp_send_reschedule(int cpu) void smp_send_stop(void) { - cpumask_t to_whom = cpu_possible_map; - cpu_clear(smp_processor_id(), to_whom); + cpumask_t to_whom; + cpumask_copy(&to_whom, cpu_possible_mask); + cpumask_clear_cpu(smp_processor_id(), &to_whom); #ifdef DEBUG_IPI_MSG if (hard_smp_processor_id() != boot_cpu_id) printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n"); diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index 5ac00fd4cd0c..f8856829c22a 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -140,7 +140,7 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) for (cpu = 0; cpu < 4; cpu++) { unsigned long aff = cpu_irq_affinity[cpu]; - if (cpu_isset(cpu, affinity)) + if (cpumask_test_cpu(cpu, &affinity)) aff |= 1UL << irq; else aff &= ~(1UL << irq); diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index fea0e4620994..6994407e242a 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -65,10 +65,11 @@ titan_update_irq_hw(unsigned long mask) register int bcpu = boot_cpuid; #ifdef CONFIG_SMP - cpumask_t cpm = cpu_present_map; + cpumask_t cpm; volatile unsigned long *dim0, *dim1, *dim2, *dim3; unsigned long mask0, mask1, mask2, mask3, dummy; + cpumask_copy(&cpm, cpu_present_mask); mask &= ~isa_enable; mask0 = mask & titan_cpu_irq_affinity[0]; mask1 = mask & titan_cpu_irq_affinity[1]; @@ -84,10 +85,10 @@ titan_update_irq_hw(unsigned long mask) dim1 = &cchip->dim1.csr; dim2 = &cchip->dim2.csr; dim3 = &cchip->dim3.csr; - if (!cpu_isset(0, cpm)) dim0 = &dummy; - if (!cpu_isset(1, cpm)) dim1 = &dummy; - if (!cpu_isset(2, cpm)) dim2 = &dummy; - if (!cpu_isset(3, cpm)) dim3 = &dummy; + if (!cpumask_test_cpu(0, &cpm)) dim0 = &dummy; + if (!cpumask_test_cpu(1, &cpm)) dim1 = &dummy; + if (!cpumask_test_cpu(2, &cpm)) dim2 = &dummy; + if (!cpumask_test_cpu(3, &cpm)) dim3 = &dummy; *dim0 = mask0; *dim1 = mask1; @@ -137,7 +138,7 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity) int cpu; for (cpu = 0; cpu < 4; cpu++) { - if (cpu_isset(cpu, affinity)) + if (cpumask_test_cpu(cpu, &affinity)) titan_cpu_irq_affinity[cpu] |= 1UL << irq; else titan_cpu_irq_affinity[cpu] &= ~(1UL << irq); diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 3d890a98a08b..f937ad123852 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -39,7 +39,7 @@ SECTIONS __init_begin = ALIGN(PAGE_SIZE); INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page needed for the THREAD_SIZE aligned init_task gets freed after init */ . = ALIGN(THREAD_SIZE); diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 86425ab53bf5..69d0c5761e2f 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -32,8 +32,6 @@ #include <asm/console.h> #include <asm/tlb.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - extern void die_if_kernel(char *,struct pt_regs *,long); static struct pcb_struct original_pcb; diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 7b2c56d8f930..3973ae395772 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -313,6 +313,7 @@ void __init paging_init(void) zones_size[ZONE_DMA] = dma_local_pfn; zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn; } + node_set_state(nid, N_NORMAL_MEMORY); free_area_init_node(nid, zones_size, start_pfn, NULL); } diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03d01d783e3b..81cbe40c159c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -63,13 +63,6 @@ config DEBUG_USER 8 - SIGSEGV faults 16 - SIGBUS faults -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL bool "Kernel low-level debugging functions" diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 076db52ff672..d5f00d7eb075 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,58 +21,22 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_MACH_OMAP_GENERIC=y -CONFIG_ARCH_OMAP2420=y -CONFIG_ARCH_OMAP2430=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_H4=y -CONFIG_MACH_OMAP_APOLLON=y -CONFIG_MACH_OMAP_2430SDP=y -CONFIG_MACH_OMAP3_BEAGLE=y -CONFIG_MACH_DEVKIT8000=y -CONFIG_MACH_OMAP_LDP=y -CONFIG_MACH_OVERO=y -CONFIG_MACH_OMAP3EVM=y -CONFIG_MACH_OMAP3517EVM=y -CONFIG_MACH_OMAP3_PANDORA=y -CONFIG_MACH_OMAP3_TOUCHBOOK=y -CONFIG_MACH_OMAP_3430SDP=y -CONFIG_MACH_NOKIA_N8X0=y -CONFIG_MACH_NOKIA_RX51=y -CONFIG_MACH_OMAP_ZOOM2=y -CONFIG_MACH_OMAP_ZOOM3=y -CONFIG_MACH_CM_T35=y -CONFIG_MACH_IGEP0020=y -CONFIG_MACH_SBC3530=y -CONFIG_MACH_OMAP_3630SDP=y -CONFIG_MACH_OMAP_4430SDP=y CONFIG_ARM_THUMBEE=y -CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -# CONFIG_LOCAL_TIMERS is not set -CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y CONFIG_BINFMT_MISC=y -CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -89,14 +53,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -107,11 +63,9 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -127,7 +81,6 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -158,19 +111,15 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_DEBUG_GPIO=y @@ -181,10 +130,6 @@ CONFIG_POWER_SUPPLY=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y -CONFIG_MENELAUS=y -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -208,7 +153,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y @@ -217,25 +161,20 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_MON=y -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -CONFIG_USB_MUSB_DEBUG=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -250,18 +189,12 @@ CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y @@ -285,12 +218,10 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index a87664f54f93..d2b514fd76f4 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -20,12 +20,6 @@ #define raw_smp_processor_id() (current_thread_info()->cpu) -/* - * at the moment, there's not a big penalty for changing CPUs - * (the >big< penalty is running SMP in the first place) - */ -#define PROC_CHANGE_PENALTY 15 - struct seq_file; /* diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 82dfe5d0c41e..265f908c4a6e 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -41,12 +41,12 @@ */ #if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7) #define tlb_fast_mode(tlb) 0 -#define FREE_PTE_NR 500 #else #define tlb_fast_mode(tlb) 1 -#define FREE_PTE_NR 0 #endif +#define MMU_GATHER_BUNDLE 8 + /* * TLB handling. This allows us to remove pages from the page * tables, and efficiently handle the TLB issues. @@ -58,7 +58,9 @@ struct mmu_gather { unsigned long range_start; unsigned long range_end; unsigned int nr; - struct page *pages[FREE_PTE_NR]; + unsigned int max; + struct page **pages; + struct page *local[MMU_GATHER_BUNDLE]; }; DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -97,26 +99,37 @@ static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr) } } +static inline void __tlb_alloc_page(struct mmu_gather *tlb) +{ + unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0); + + if (addr) { + tlb->pages = (void *)addr; + tlb->max = PAGE_SIZE / sizeof(struct page *); + } +} + static inline void tlb_flush_mmu(struct mmu_gather *tlb) { tlb_flush(tlb); if (!tlb_fast_mode(tlb)) { free_pages_and_swap_cache(tlb->pages, tlb->nr); tlb->nr = 0; + if (tlb->pages == tlb->local) + __tlb_alloc_page(tlb); } } -static inline struct mmu_gather * -tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +static inline void +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int fullmm) { - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - tlb->mm = mm; - tlb->fullmm = full_mm_flush; + tlb->fullmm = fullmm; tlb->vma = NULL; + tlb->max = ARRAY_SIZE(tlb->local); + tlb->pages = tlb->local; tlb->nr = 0; - - return tlb; + __tlb_alloc_page(tlb); } static inline void @@ -127,7 +140,8 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) /* keep the page table cache within bounds */ check_pgt_cache(); - put_cpu_var(mmu_gathers); + if (tlb->pages != tlb->local) + free_pages((unsigned long)tlb->pages, 0); } /* @@ -162,15 +176,22 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) tlb_flush(tlb); } -static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { if (tlb_fast_mode(tlb)) { free_page_and_swap_cache(page); - } else { - tlb->pages[tlb->nr++] = page; - if (tlb->nr >= FREE_PTE_NR) - tlb_flush_mmu(tlb); + return 1; /* avoid calling tlb_flush_mmu */ } + + tlb->pages[tlb->nr++] = page; + VM_BUG_ON(tlb->nr > tlb->max); + return tlb->max - tlb->nr; +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (!__tlb_remove_page(tlb, page)) + tlb_flush_mmu(tlb); } static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index b4348e62ef06..e5287f21badc 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -82,7 +82,7 @@ SECTIONS #endif } - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) #ifndef CONFIG_XIP_KERNEL . = ALIGN(PAGE_SIZE); diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h new file mode 100644 index 000000000000..292d55ed2113 --- /dev/null +++ b/arch/arm/mach-ixp4xx/include/mach/ixp46x_ts.h @@ -0,0 +1,78 @@ +/* + * PTP 1588 clock using the IXP46X + * + * Copyright (C) 2010 OMICRON electronics GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _IXP46X_TS_H_ +#define _IXP46X_TS_H_ + +#define DEFAULT_ADDEND 0xF0000029 +#define TICKS_NS_SHIFT 4 + +struct ixp46x_channel_ctl { + u32 ch_control; /* 0x40 Time Synchronization Channel Control */ + u32 ch_event; /* 0x44 Time Synchronization Channel Event */ + u32 tx_snap_lo; /* 0x48 Transmit Snapshot Low Register */ + u32 tx_snap_hi; /* 0x4C Transmit Snapshot High Register */ + u32 rx_snap_lo; /* 0x50 Receive Snapshot Low Register */ + u32 rx_snap_hi; /* 0x54 Receive Snapshot High Register */ + u32 src_uuid_lo; /* 0x58 Source UUID0 Low Register */ + u32 src_uuid_hi; /* 0x5C Sequence Identifier/Source UUID0 High */ +}; + +struct ixp46x_ts_regs { + u32 control; /* 0x00 Time Sync Control Register */ + u32 event; /* 0x04 Time Sync Event Register */ + u32 addend; /* 0x08 Time Sync Addend Register */ + u32 accum; /* 0x0C Time Sync Accumulator Register */ + u32 test; /* 0x10 Time Sync Test Register */ + u32 unused; /* 0x14 */ + u32 rsystime_lo; /* 0x18 RawSystemTime_Low Register */ + u32 rsystime_hi; /* 0x1C RawSystemTime_High Register */ + u32 systime_lo; /* 0x20 SystemTime_Low Register */ + u32 systime_hi; /* 0x24 SystemTime_High Register */ + u32 trgt_lo; /* 0x28 TargetTime_Low Register */ + u32 trgt_hi; /* 0x2C TargetTime_High Register */ + u32 asms_lo; /* 0x30 Auxiliary Slave Mode Snapshot Low */ + u32 asms_hi; /* 0x34 Auxiliary Slave Mode Snapshot High */ + u32 amms_lo; /* 0x38 Auxiliary Master Mode Snapshot Low */ + u32 amms_hi; /* 0x3C Auxiliary Master Mode Snapshot High */ + + struct ixp46x_channel_ctl channel[3]; +}; + +/* 0x00 Time Sync Control Register Bits */ +#define TSCR_AMM (1<<3) +#define TSCR_ASM (1<<2) +#define TSCR_TTM (1<<1) +#define TSCR_RST (1<<0) + +/* 0x04 Time Sync Event Register Bits */ +#define TSER_SNM (1<<3) +#define TSER_SNS (1<<2) +#define TTIPEND (1<<1) + +/* 0x40 Time Synchronization Channel Control Register Bits */ +#define MASTER_MODE (1<<0) +#define TIMESTAMP_ALL (1<<1) + +/* 0x44 Time Synchronization Channel Event Register Bits */ +#define TX_SNAPSHOT_LOCKED (1<<0) +#define RX_SNAPSHOT_LOCKED (1<<1) + +#endif diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b997a35830fc..19d5891c48e3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -288,6 +288,7 @@ config MACH_IGEP0030 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_IGEP0020 config MACH_SBC3530 bool "OMAP3 SBC STALKER board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 66dfbccacd25..b14807794401 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,8 +229,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ hsmmc.o -obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \ - hsmmc.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ @@ -270,3 +268,5 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o disp-$(CONFIG_OMAP2_DSS) := display.o obj-y += $(disp-m) $(disp-y) + +obj-y += common-board-devices.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 1fa6bb896f41..d54969be0a54 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -41,6 +41,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SDP2430_CS0_BASE 0x04000000 #define SECONDARY_LCD_GPIO 147 @@ -180,15 +181,6 @@ static struct twl4030_platform_data sdp2430_twldata = { .vmmc1 = &sdp2430_vmmc1, }; -static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_24XX_SYS_NIRQ, - .platform_data = &sdp2430_twldata, - }, -}; - static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2D), @@ -201,8 +193,7 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, - ARRAY_SIZE(sdp2430_i2c_boardinfo)); + omap2_pmic_init("twl4030", &sdp2430_twldata); return 0; } @@ -217,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; static struct omap_usb_config sdp2430_usb_config __initdata = { .otg = 1, #ifdef CONFIG_USB_GADGET_OMAP @@ -240,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_2430sdp_init(void) { - int ret; - omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); omap_board_config = sdp2430_config; @@ -255,14 +239,13 @@ static void __init omap_2430sdp_init(void) omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); /* Turn off secondary LCD backlight */ - ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); - if (ret == 0) - gpio_direction_output(SECONDARY_LCD_GPIO, 0); + gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, + "Secondary LCD backlight"); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 9afd087cc29c..ae2963a98041 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -19,7 +19,6 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <linux/io.h> @@ -37,8 +36,8 @@ #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <plat/gpmc-smc91x.h> @@ -48,6 +47,7 @@ #include "hsmmc.h" #include "pm.h" #include "control.h" +#include "common-board-devices.h" #define CONFIG_DISABLE_HFCLK 1 @@ -59,24 +59,6 @@ #define TWL4030_MSECURE_GPIO 22 -/* FIXME: These values need to be updated based on more profiling on 3430sdp*/ -static struct cpuidle_params omap3_cpuidle_params_table[] = { - /* C1 */ - {1, 2, 2, 5}, - /* C2 */ - {1, 10, 10, 30}, - /* C3 */ - {1, 50, 50, 300}, - /* C4 */ - {1, 1500, 1800, 4000}, - /* C5 */ - {1, 2500, 7500, 12000}, - /* C6 */ - {1, 3000, 8500, 15000}, - /* C7 */ - {1, 10000, 30000, 300000}, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -123,63 +105,14 @@ static struct twl4030_keypad_data sdp3430_kp_data = { .rep = 1, }; -static int ts_gpio; /* Needed for ads7846_get_pendown_state */ - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .wakeup = true, -}; - - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info sdp3430_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, -}; - - #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static unsigned backlight_gpio; -static unsigned enable_gpio; +static struct gpio sdp3430_dss_gpios[] __initdata = { + {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, + {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, +}; + static int lcd_enabled; static int dvi_enabled; @@ -187,29 +120,11 @@ static void __init sdp3430_display_init(void) { int r; - enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; - backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; - - r = gpio_request(enable_gpio, "LCD reset"); - if (r) { - printk(KERN_ERR "failed to get LCD reset GPIO\n"); - goto err0; - } - - r = gpio_request(backlight_gpio, "LCD Backlight"); - if (r) { - printk(KERN_ERR "failed to get LCD backlight GPIO\n"); - goto err1; - } - - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + r = gpio_request_array(sdp3430_dss_gpios, + ARRAY_SIZE(sdp3430_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get LCD control GPIOs\n"); - return; -err1: - gpio_free(enable_gpio); -err0: - return; } static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) @@ -219,8 +134,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_direction_output(enable_gpio, 1); - gpio_direction_output(backlight_gpio, 1); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); lcd_enabled = 1; @@ -231,8 +146,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -360,12 +275,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev, omap2_hsmmc_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ - gpio_request(gpio + 7, "sub_lcd_en_bkl"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); /* gpio + 15 is "sub_lcd_nRST" (output) */ - gpio_request(gpio + 15, "sub_lcd_nRST"); - gpio_direction_output(gpio + 15, 0); + gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); return 0; } @@ -580,20 +493,10 @@ static struct twl4030_platform_data sdp3430_twldata = { .vpll2 = &sdp3430_vpll2, }; -static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &sdp3430_twldata, - }, -}; - static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ - omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo, - ARRAY_SIZE(sdp3430_i2c_boardinfo)); + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ @@ -872,30 +775,22 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap_3430sdp_init(void) { + int gpio_pendown; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); - omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1; - sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(sdp3430_spi_board_info, - ARRAY_SIZE(sdp3430_spi_board_info)); - ads7846_dev_init(); + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; + omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 56702c5e577f..73fa90bb6953 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -36,12 +36,13 @@ #include <plat/usb.h> #include <plat/mmc.h> #include <plat/omap4-keypad.h> -#include <plat/display.h> +#include <video/omapdss.h> #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 @@ -251,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { }, }; +static struct gpio sdp4430_eth_gpios[] __initdata = { + { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" }, + { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" }, + { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, +}; + static int omap_ethernet_init(void) { int status; /* Request of GPIO lines */ + status = gpio_request_array(sdp4430_eth_gpios, + ARRAY_SIZE(sdp4430_eth_gpios)); + if (status) + pr_err("Cannot request ETH GPIOs\n"); - status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); - return status; - } - - status = gpio_request(ETH_KS8851_QUART, "quart"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); - goto error1; - } - - status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); - goto error2; - } - - /* Configuration of requested GPIO lines */ - - status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - status = gpio_direction_output(ETH_KS8851_QUART, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); - goto error3; - } - - status = gpio_direction_input(ETH_KS8851_IRQ); - if (status) { - pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - return 0; - -error3: - gpio_free(ETH_KS8851_IRQ); -error2: - gpio_free(ETH_KS8851_QUART); -error1: - gpio_free(ETH_KS8851_POWER_ON); return status; } @@ -575,14 +540,6 @@ static struct twl4030_platform_data sdp4430_twldata = { .usb = &omap4_usbphy_data }; -static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &sdp4430_twldata, - }, -}; static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { { I2C_BOARD_INFO("tmp105", 0x48), @@ -598,12 +555,7 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { }; static int __init omap4_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, - ARRAY_SIZE(sdp4430_i2c_boardinfo)); + omap4_pmic_init("twl6030", &sdp4430_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); @@ -614,21 +566,13 @@ static int __init omap4_i2c_init(void) static void __init omap_sfh7741prox_init(void) { - int error; + int error; - error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); - if (error < 0) { + error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO, + GPIOF_OUT_INIT_LOW, "sfh7741"); + if (error < 0) pr_err("%s:failed to request GPIO %d, error %d\n", __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - return; - } - - error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); - if (error < 0) { - pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", - __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - gpio_free(OMAP4_SFH7741_ENABLE_GPIO); - } } static void sdp4430_hdmi_mux_init(void) @@ -645,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio sdp4430_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(sdp4430_hdmi_gpios, + ARRAY_SIZE(sdp4430_hdmi_gpios)); + if (status) + pr_err("%s: Cannot request HDMI GPIOs\n", __func__); return status; } @@ -680,6 +616,15 @@ static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", .type = OMAP_DISPLAY_TYPE_HDMI, + .clocks = { + .dispc = { + .dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK, + }, + .hdmi = { + .regn = 15, + .regm2 = 1, + }, + }, .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index a890d244fec6..5e438a77cd72 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -89,19 +89,13 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable"); + ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, + "usb_ehci_enable"); if (ret < 0) { pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); return; } - ret = gpio_direction_output(GPIO_USB_POWER, 1); - if (ret < 0) { - gpio_free(GPIO_USB_POWER); - pr_err("Unable to initialize EHCI power\n"); - return; - } - usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ce7d5e6e4150..63af4171c043 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -34,8 +34,8 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/usb.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include "mux.h" #include "control.h" @@ -174,19 +174,14 @@ static void __init am3517_evm_rtc_init(void) int r; omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq"); + + r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); if (r < 0) { printk(KERN_WARNING "failed to request GPIO#%d\n", GPIO_RTCS35390A_IRQ); return; } - r = gpio_direction_input(GPIO_RTCS35390A_IRQ); - if (r < 0) { - printk(KERN_WARNING "GPIO#%d cannot be configured as input\n", - GPIO_RTCS35390A_IRQ); - gpio_free(GPIO_RTCS35390A_IRQ); - return; - } + am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); } @@ -242,6 +237,15 @@ static int dvi_enabled; #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) +static struct gpio am3517_evm_dss_gpios[] __initdata = { + /* GPIO 182 = LCD Backlight Power */ + { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, + /* GPIO 181 = LCD Panel PWM */ + { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, + /* GPIO 176 = LCD Panel Power enable pin */ + { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init am3517_evm_display_init(void) { int r; @@ -249,41 +253,15 @@ static void __init am3517_evm_display_init(void) omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - /* - * Enable GPIO 182 = LCD Backlight Power - */ - r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr"); + + r = gpio_request_array(am3517_evm_dss_gpios, + ARRAY_SIZE(am3517_evm_dss_gpios)); if (r) { - printk(KERN_ERR "failed to get lcd_backlight_pwr\n"); + printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); return; } - gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1); - /* - * Enable GPIO 181 = LCD Panel PWM - */ - r = gpio_request(LCD_PANEL_PWM, "lcd_pwm"); - if (r) { - printk(KERN_ERR "failed to get lcd_pwm\n"); - goto err_1; - } - gpio_direction_output(LCD_PANEL_PWM, 1); - /* - * Enable GPIO 176 = LCD Panel Power enable pin - */ - r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_pwr\n"); - goto err_2; - } - gpio_direction_output(LCD_PANEL_PWR, 1); printk(KERN_INFO "Display initialized successfully\n"); - return; - -err_2: - gpio_free(LCD_PANEL_PWM); -err_1: - gpio_free(LCD_PANEL_BKLIGHT_PWR); } #else static void __init am3517_evm_display_init(void) {} @@ -396,7 +374,7 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, .set_phy_power = am35x_musb_phy_power, .clear_irq = am35x_musb_clear_irq, - .set_mode = am35x_musb_set_mode, + .set_mode = am35x_set_mode, .reset = am35x_musb_reset, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f4f8374a0298..f3beb8eeef77 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -202,6 +202,7 @@ static inline void __init apollon_init_smc91x(void) unsigned int rate; struct clk *gpmc_fck; int eth_cs; + int err; gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ if (IS_ERR(gpmc_fck)) { @@ -245,15 +246,13 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_mux_init_gpio(74, 0); - if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { + omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); + err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); + if (err) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - goto out; } - gpio_direction_input(APOLLON_ETHR_GPIO_IRQ); - out: clk_disable(gpmc_fck); clk_put(gpmc_fck); @@ -280,20 +279,19 @@ static void __init omap_apollon_init_early(void) omap2_init_common_devices(NULL, NULL); } +static struct gpio apollon_gpio_leds[] __initdata = { + { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ + { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ + { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ +}; + static void __init apollon_led_init(void) { - /* LED0 - AA10 */ omap_mux_init_signal("vlynq_clk.gpio_13", 0); - gpio_request(LED0_GPIO13, "LED0"); - gpio_direction_output(LED0_GPIO13, 0); - /* LED1 - AA6 */ omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - gpio_request(LED1_GPIO14, "LED1"); - gpio_direction_output(LED1_GPIO14, 0); - /* LED2 - AA4 */ omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - gpio_request(LED2_GPIO15, "LED2"); - gpio_direction_output(LED2_GPIO15, 0); + + gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } static void __init apollon_usb_init(void) @@ -301,8 +299,7 @@ static void __init apollon_usb_init(void) /* USB device */ /* DEVICE_SUSPEND */ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request(12, "USB suspend"); - gpio_direction_output(12, 0); + gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); omap2_usbfs_init(&apollon_usb_config); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 02a12b41c0ff..c63115bc1536 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,8 +45,8 @@ #include <plat/nand.h> #include <plat/gpmc.h> #include <plat/usb.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -54,6 +54,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define CM_T35_GPIO_PENDOWN 57 @@ -66,86 +67,28 @@ #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config cm_t35_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource cm_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device cm_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(cm_t35_smsc911x_resources), - .resource = cm_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, -}; - -static struct resource sb_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, + .cs = CM_T35_SMSC911X_CS, + .gpio_irq = CM_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static struct platform_device sb_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(sb_t35_smsc911x_resources), - .resource = sb_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, + .cs = SB_T35_SMSC911X_CS, + .gpio_irq = SB_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static void __init cm_t35_init_smsc911x(struct platform_device *dev, - int cs, int irq_gpio) -{ - unsigned long cs_mem_base; - - if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) { - pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n"); - return; - } - - dev->resource[0].start = cs_mem_base + 0x0; - dev->resource[0].end = cs_mem_base + 0xff; - - if ((gpio_request(irq_gpio, "ETH IRQ") == 0) && - (gpio_direction_input(irq_gpio) == 0)) { - gpio_export(irq_gpio, 0); - } else { - pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - platform_device_register(dev); -} - static void __init cm_t35_init_ethernet(void) { - cm_t35_init_smsc911x(&cm_t35_smsc911x_device, - CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO); - cm_t35_init_smsc911x(&sb_t35_smsc911x_device, - SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); + gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } #else static inline void __init cm_t35_init_ethernet(void) { return; } @@ -235,69 +178,10 @@ static void __init cm_t35_init_nand(void) static inline void cm_t35_init_nand(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <linux/spi/ads7846.h> - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(CM_T35_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info cm_t35_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -}; - -static void __init cm_t35_init_ads7846(void) -{ - if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) { - gpio_export(CM_T35_GPIO_PENDOWN, 0); - } else { - pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - - spi_register_board_info(cm_t35_spi_board_info, - ARRAY_SIZE(cm_t35_spi_board_info)); -} -#else -static inline void cm_t35_init_ads7846(void) {} -#endif - #define CM_T35_LCD_EN_GPIO 157 #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_bl_gpio; -static int lcd_en_gpio; -static int dvi_en_gpio; - static int lcd_enabled; static int dvi_enabled; @@ -308,8 +192,8 @@ static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(lcd_en_gpio, 1); - gpio_set_value(lcd_bl_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); + gpio_set_value(CM_T35_LCD_BL_GPIO, 1); lcd_enabled = 1; @@ -320,8 +204,8 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_set_value(lcd_bl_gpio, 0); - gpio_set_value(lcd_en_gpio, 0); + gpio_set_value(CM_T35_LCD_BL_GPIO, 0); + gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -331,7 +215,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(dvi_en_gpio, 0); + gpio_set_value(CM_T35_DVI_EN_GPIO, 0); dvi_enabled = 1; return 0; @@ -339,7 +223,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(dvi_en_gpio, 1); + gpio_set_value(CM_T35_DVI_EN_GPIO, 1); dvi_enabled = 0; } @@ -421,62 +305,38 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; +static struct gpio cm_t35_dss_gpios[] __initdata = { + { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, + { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init cm_t35_init_display(void) { int err; - lcd_en_gpio = CM_T35_LCD_EN_GPIO; - lcd_bl_gpio = CM_T35_LCD_BL_GPIO; - dvi_en_gpio = CM_T35_DVI_EN_GPIO; - spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request(lcd_en_gpio, "LCD RST"); - if (err) { - pr_err("CM-T35: failed to get LCD reset GPIO\n"); - goto out; - } - - err = gpio_request(lcd_bl_gpio, "LCD BL"); + err = gpio_request_array(cm_t35_dss_gpios, + ARRAY_SIZE(cm_t35_dss_gpios)); if (err) { - pr_err("CM-T35: failed to get LCD backlight control GPIO\n"); - goto err_lcd_bl; - } - - err = gpio_request(dvi_en_gpio, "DVI EN"); - if (err) { - pr_err("CM-T35: failed to get DVI reset GPIO\n"); - goto err_dvi_en; + pr_err("CM-T35: failed to request DSS control GPIOs\n"); + return; } - gpio_export(lcd_en_gpio, 0); - gpio_export(lcd_bl_gpio, 0); - gpio_export(dvi_en_gpio, 0); - gpio_direction_output(lcd_en_gpio, 0); - gpio_direction_output(lcd_bl_gpio, 0); - gpio_direction_output(dvi_en_gpio, 1); + gpio_export(CM_T35_LCD_EN_GPIO, 0); + gpio_export(CM_T35_LCD_BL_GPIO, 0); + gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); - gpio_set_value(lcd_en_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - goto err_dev_reg; + gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); } - - return; - -err_dev_reg: - gpio_free(dvi_en_gpio); -err_dvi_en: - gpio_free(lcd_bl_gpio); -err_lcd_bl: - gpio_free(lcd_en_gpio); -out: - - return; } static struct regulator_consumer_supply cm_t35_vmmc1_supply = { @@ -609,10 +469,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, { int wlan_rst = gpio + 2; - if ((gpio_request(wlan_rst, "WLAN RST") == 0) && - (gpio_direction_output(wlan_rst, 1) == 0)) { + if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { gpio_export(wlan_rst, 0); - udelay(10); gpio_set_value(wlan_rst, 0); udelay(10); @@ -653,19 +511,9 @@ static struct twl4030_platform_data cm_t35_twldata = { .vpll2 = &cm_t35_vpll2, }; -static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &cm_t35_twldata, - }, -}; - static void __init cm_t35_init_i2c(void) { - omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo, - ARRAY_SIZE(cm_t35_i2c_boardinfo)); + omap3_pmic_init("tps65930", &cm_t35_twldata); } static void __init cm_t35_init_early(void) @@ -775,12 +623,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; @@ -792,12 +634,12 @@ static void __init cm_t35_init(void) omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); - cm_t35_init_ads7846(); + omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a27e3eee8292..08f08e812492 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -148,14 +148,13 @@ static void __init cm_t3517_init_rtc(void) { int err; - err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, + "rtc cs en"); if (err) { pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); return; } - gpio_direction_output(RTC_CS_EN_GPIO, 1); - platform_device_register(&cm_t3517_rtc_device); } #else @@ -182,11 +181,11 @@ static int cm_t3517_init_usbh(void) { int err; - err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, + "usb hub rst"); if (err) { pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); } else { - gpio_direction_output(USB_HUB_RESET_GPIO, 0); udelay(10); gpio_set_value(USB_HUB_RESET_GPIO, 1); msleep(1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 65f9fde2c567..cf520d7dd614 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -45,13 +45,12 @@ #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/dm9000.h> #include <linux/interrupt.h> @@ -60,6 +59,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -97,13 +97,6 @@ static struct mtd_partition devkit8000_nand_partitions[] = { }, }; -static struct omap_nand_platform_data devkit8000_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = devkit8000_nand_partitions, - .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -249,7 +242,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + GPIOF_OUT_INIT_LOW, "LCD_PWREN"); if (ret < 0) { devkit8000_lcd_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); @@ -258,7 +251,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + GPIOF_OUT_INIT_LOW, "DVI PowerDown"); if (ret < 0) { devkit8000_dvi_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); @@ -366,19 +359,9 @@ static struct twl4030_platform_data devkit8000_twldata = { .keypad = &devkit8000_kp_data, }; -static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &devkit8000_twldata, - }, -}; - static int __init devkit8000_i2c_init(void) { - omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo, - ARRAY_SIZE(devkit8000_i2c_boardinfo)); + omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 400, NULL, 0); @@ -463,56 +446,6 @@ static void __init devkit8000_init_irq(void) #endif } -static void __init devkit8000_ads7846_init(void) -{ - int gpio = OMAP3_DEVKIT_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info devkit8000_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - #define OMAP_DM9000_BASE 0x2c000000 static struct resource omap_dm9000_resources[] = { @@ -550,14 +483,14 @@ static void __init omap_dm9000_init(void) { unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; struct omap_die_id odi; + int ret; - if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { + ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); + if (ret < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); return; - } - - gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + } /* init the mac address using DIE id */ omap_get_die_id(&odi); @@ -576,45 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static void __init devkit8000_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - devkit8000_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&devkit8000_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -795,14 +689,13 @@ static void __init devkit8000_init(void) ARRAY_SIZE(devkit8000_devices)); omap_display_init(&devkit8000_dss_data); - spi_register_board_info(devkit8000_spi_board_info, - ARRAY_SIZE(devkit8000_spi_board_info)); - devkit8000_ads7846_init(); + omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - devkit8000_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 34cf982b9679..0c1bfca3f731 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -31,13 +31,14 @@ #include <plat/common.h> #include <plat/gpmc.h> #include <plat/usb.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <plat/onenand.h> #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" +#include "common-board-devices.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -54,6 +55,11 @@ #define IGEP2_RC_GPIO_WIFI_NRESET 139 #define IGEP2_RC_GPIO_BT_NRESET 137 +#define IGEP3_GPIO_LED0_GREEN 54 +#define IGEP3_GPIO_LED0_RED 53 +#define IGEP3_GPIO_LED1_RED 16 +#define IGEP3_GPIO_USBH_NRESET 183 + /* * IGEP2 Hardware Revision Table * @@ -68,6 +74,7 @@ #define IGEP2_BOARD_HWREV_B 0 #define IGEP2_BOARD_HWREV_C 1 +#define IGEP3_BOARD_HWREV 2 static u8 hwrev; @@ -75,24 +82,29 @@ static void __init igep2_get_revision(void) { u8 ret; + if (machine_is_igep0030()) { + hwrev = IGEP3_BOARD_HWREV; + return; + } + omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) && - (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) { - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - } else { + if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); pr_err("IGEP2: Unknown Hardware Revision\n"); + return; + } + + ret = gpio_get_value(IGEP2_GPIO_LED1_RED); + if (ret == 0) { + pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_C; + } else if (ret == 1) { + pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_B; + } else { + pr_err("IGEP2: Unknown Hardware Revision\n"); + hwrev = -1; } gpio_free(IGEP2_GPIO_LED1_RED); @@ -111,7 +123,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep2_onenand_partitions[] = { +static struct mtd_partition igep_onenand_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -139,21 +151,21 @@ static struct mtd_partition igep2_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep2_onenand_data = { - .parts = igep2_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep2_onenand_partitions), +static struct omap_onenand_platform_data igep_onenand_data = { + .parts = igep_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep_onenand_partitions), .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static struct platform_device igep2_onenand_device = { +static struct platform_device igep_onenand_device = { .name = "omap2-onenand", .id = -1, .dev = { - .platform_data = &igep2_onenand_data, + .platform_data = &igep_onenand_data, }, }; -static void __init igep2_flash_init(void) +static void __init igep_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -165,7 +177,7 @@ static void __init igep2_flash_init(void) /* Check if NAND/oneNAND is configured */ if ((ret & 0xC00) == 0x800) /* NAND found */ - pr_err("IGEP2: Unsupported NAND found\n"); + pr_err("IGEP: Unsupported NAND found\n"); else { ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); if ((ret & 0x3F) == (ONENAND_MAP >> 24)) @@ -175,85 +187,46 @@ static void __init igep2_flash_init(void) } if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP2: Unable to find configuration in GPMC\n"); + pr_err("IGEP: Unable to find configuration in GPMC\n"); return; } - igep2_onenand_data.cs = onenandcs; + igep_onenand_data.cs = onenandcs; - if (platform_device_register(&igep2_onenand_device) < 0) - pr_err("IGEP2: Unable to register OneNAND device\n"); + if (platform_device_register(&igep_onenand_device) < 0) + pr_err("IGEP: Unable to register OneNAND device\n"); } #else -static void __init igep2_flash_init(void) {} +static void __init igep_flash_init(void) {} #endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config igep2_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource igep2_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device igep2_smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(igep2_smsc911x_resources), - .resource = igep2_smsc911x_resources, - .dev = { - .platform_data = &igep2_smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = IGEP2_SMSC911X_CS, + .gpio_irq = IGEP2_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init igep2_init_smsc911x(void) { - unsigned long cs_mem_base; - - if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n"); - gpmc_cs_free(IGEP2_SMSC911X_CS); - return; - } - - igep2_smsc911x_resources[0].start = cs_mem_base + 0x0; - igep2_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) { - gpio_export(IGEP2_SMSC911X_GPIO, 0); - } else { - pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n"); - return; - } - - platform_device_register(&igep2_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep2_vmmc1_supply = +static struct regulator_consumer_supply igep_vmmc1_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep2_vmmc1 = { +static struct regulator_init_data igep_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, @@ -264,13 +237,13 @@ static struct regulator_init_data igep2_vmmc1 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc1_supply, + .consumer_supplies = &igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep2_vio_supply = +static struct regulator_consumer_supply igep_vio_supply = REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vio = { +static struct regulator_init_data igep_vio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, @@ -282,34 +255,34 @@ static struct regulator_init_data igep2_vio = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vio_supply, + .consumer_supplies = &igep_vio_supply, }; -static struct regulator_consumer_supply igep2_vmmc2_supply = +static struct regulator_consumer_supply igep_vmmc2_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vmmc2 = { +static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc2_supply, + .consumer_supplies = &igep_vmmc2_supply, }; -static struct fixed_voltage_config igep2_vwlan = { +static struct fixed_voltage_config igep_vwlan = { .supply_name = "vwlan", .microvolts = 3300000, .gpio = -EINVAL, .enabled_at_boot = 1, - .init_data = &igep2_vmmc2, + .init_data = &igep_vmmc2, }; -static struct platform_device igep2_vwlan_device = { +static struct platform_device igep_vwlan_device = { .name = "reg-fixed-voltage", .id = 0, .dev = { - .platform_data = &igep2_vwlan, + .platform_data = &igep_vwlan, }, }; @@ -334,20 +307,17 @@ static struct omap2_hsmmc_info mmc[] = { #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) #include <linux/leds.h> -static struct gpio_led igep2_gpio_leds[] = { +static struct gpio_led igep_gpio_leds[] = { [0] = { .name = "gpio-led:red:d0", - .gpio = IGEP2_GPIO_LED0_RED, .default_trigger = "default-off" }, [1] = { .name = "gpio-led:green:d0", - .gpio = IGEP2_GPIO_LED0_GREEN, .default_trigger = "default-off", }, [2] = { .name = "gpio-led:red:d1", - .gpio = IGEP2_GPIO_LED1_RED, .default_trigger = "default-off", }, [3] = { @@ -358,94 +328,119 @@ static struct gpio_led igep2_gpio_leds[] = { }, }; -static struct gpio_led_platform_data igep2_led_pdata = { - .leds = igep2_gpio_leds, - .num_leds = ARRAY_SIZE(igep2_gpio_leds), +static struct gpio_led_platform_data igep_led_pdata = { + .leds = igep_gpio_leds, + .num_leds = ARRAY_SIZE(igep_gpio_leds), }; -static struct platform_device igep2_led_device = { +static struct platform_device igep_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &igep2_led_pdata, + .platform_data = &igep_led_pdata, }, }; -static void __init igep2_leds_init(void) +static void __init igep_leds_init(void) { - platform_device_register(&igep2_led_device); + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } + + platform_device_register(&igep_led_device); } #else -static inline void igep2_leds_init(void) +static struct gpio igep_gpio_leds[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, +}; + +static inline void igep_leds_init(void) { - if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); + int i; - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } - if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED1_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { + pr_warning("IGEP v2: Could not obtain leds gpios\n"); + return; + } + for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) + gpio_export(igep_gpio_leds[i].gpio, 0); } #endif -static int igep2_twl_gpio_setup(struct device *dev, +static struct gpio igep2_twl_gpios[] = { + { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, +}; + +static int igep_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || - (gpio_direction_input(gpio + 1) < 0)) - pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); - - /* - * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN - * (out, active low) - */ - if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || - (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) - pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); + pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); #else - igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; + igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif + if (machine_is_igep0030()) + return 0; + + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + igep2_twl_gpios[0].gpio = gpio + 1; + + /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ + igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; + + ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); + if (ret < 0) + pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); + return 0; }; -static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = { +static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .setup = igep2_twl_gpio_setup, + .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep2_usb_data = { +static struct twl4030_usb_data igep_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -507,16 +502,17 @@ static struct regulator_init_data igep2_vpll2 = { static void __init igep2_display_init(void) { - if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") && - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) + int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, + "GPIO_DVI_PUP"); + if (err) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -static struct platform_device *igep2_devices[] __initdata = { - &igep2_vwlan_device, +static struct platform_device *igep_devices[] __initdata = { + &igep_vwlan_device, }; -static void __init igep2_init_early(void) +static void __init igep_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(m65kxxxxam_sdrc_params, @@ -561,27 +557,15 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { .rep = 1, }; -static struct twl4030_platform_data igep2_twldata = { +static struct twl4030_platform_data igep_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ - .usb = &igep2_usb_data, - .codec = &igep2_codec_data, - .gpio = &igep2_twl4030_gpio_pdata, - .keypad = &igep2_keypad_pdata, - .vmmc1 = &igep2_vmmc1, - .vpll2 = &igep2_vpll2, - .vio = &igep2_vio, -}; - -static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep2_twldata, - }, + .usb = &igep_usb_data, + .gpio = &igep_twl4030_gpio_pdata, + .vmmc1 = &igep_vmmc1, + .vio = &igep_vio, }; static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { @@ -590,32 +574,29 @@ static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { }, }; -static void __init igep2_i2c_init(void) +static void __init igep_i2c_init(void) { int ret; - ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo, - ARRAY_SIZE(igep2_i2c1_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret); + if (machine_is_igep0020()) { + /* + * Bus 3 is attached to the DVI port where devices like the + * pico DLP projector don't work reliably with 400kHz + */ + ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, + ARRAY_SIZE(igep2_i2c3_boardinfo)); + if (ret) + pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + + igep_twldata.codec = &igep2_codec_data; + igep_twldata.keypad = &igep2_keypad_pdata; + igep_twldata.vpll2 = &igep2_vpll2; + } - /* - * Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz - */ - ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, - ARRAY_SIZE(igep2_i2c3_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + omap3_pmic_init("twl4030", &igep_twldata); } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -626,6 +607,17 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL, }; +static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -633,82 +625,95 @@ static struct omap_board_mux board_mux[] __initdata = { #endif #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep_wlan_bt_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; -static void __init igep2_wlan_bt_init(void) +static void __init igep_wlan_bt_init(void) { - unsigned npd, wreset, btreset; + int err; /* GPIO's for WLAN-BT combo depends on hardware revision */ if (hwrev == IGEP2_BOARD_HWREV_B) { - npd = IGEP2_RB_GPIO_WIFI_NPD; - wreset = IGEP2_RB_GPIO_WIFI_NRESET; - btreset = IGEP2_RB_GPIO_BT_NRESET; - } else if (hwrev == IGEP2_BOARD_HWREV_C) { - npd = IGEP2_RC_GPIO_WIFI_NPD; - wreset = IGEP2_RC_GPIO_WIFI_NRESET; - btreset = IGEP2_RC_GPIO_BT_NRESET; + igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; + } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) { + igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; } else return; - /* Set GPIO's for WLAN-BT combo module */ - if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(npd, 1) == 0)) { - gpio_export(npd, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(wreset, 1) == 0)) { - gpio_export(wreset, 0); - gpio_set_value(wreset, 0); - udelay(10); - gpio_set_value(wreset, 1); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + err = gpio_request_array(igep_wlan_bt_gpios, + ARRAY_SIZE(igep_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(igep_wlan_bt_gpios[0].gpio, 0); + gpio_export(igep_wlan_bt_gpios[1].gpio, 0); + gpio_export(igep_wlan_bt_gpios[2].gpio, 0); + + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); + udelay(10); + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); - if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(btreset, 1) == 0)) { - gpio_export(btreset, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); } #else -static inline void __init igep2_wlan_bt_init(void) { } +static inline void __init igep_wlan_bt_init(void) { } #endif -static void __init igep2_init(void) +static void __init igep_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ igep2_get_revision(); /* Register I2C busses and drivers */ - igep2_i2c_init(); - platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); - omap_display_init(&igep2_dss_data); + igep_i2c_init(); + platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); + usb_musb_init(NULL); - igep2_flash_init(); - igep2_leds_init(); - igep2_display_init(); - igep2_init_smsc911x(); + igep_flash_init(); + igep_leds_init(); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ - igep2_wlan_bt_init(); + igep_wlan_bt_init(); + if (machine_is_igep0020()) { + omap_display_init(&igep2_dss_data); + igep2_display_init(); + igep2_init_smsc911x(); + usbhs_init(&igep2_usbhs_bdata); + } else { + usbhs_init(&igep3_usbhs_bdata); + } } MACHINE_START(IGEP0020, "IGEP v2 board") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = igep2_init_early, + .init_early = igep_init_early, + .init_irq = omap_init_irq, + .init_machine = igep_init, + .timer = &omap_timer, +MACHINE_END + +MACHINE_START(IGEP0030, "IGEP OMAP3 module") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = igep_init_early, .init_irq = omap_init_irq, - .init_machine = igep2_init, + .init_machine = igep_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c deleted file mode 100644 index 2cf86c3cb1a3..000000000000 --- a/arch/arm/mach-omap2/board-igep0030.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * Copyright (C) 2010 - ISEE 2007 SL - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> - -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <plat/board.h> -#include <plat/common.h> -#include <plat/gpmc.h> -#include <plat/usb.h> -#include <plat/onenand.h> - -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 - -#define IGEP3_GPIO_WIFI_NPD 138 -#define IGEP3_GPIO_WIFI_NRESET 139 -#define IGEP3_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_USBH_NRESET 183 - - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* - * x2 Flash built-in COMBO POP MEMORY - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep3_onenand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data igep3_onenand_pdata = { - .parts = igep3_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), - .onenand_setup = NULL, - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep3_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep3_onenand_pdata, - }, -}; - -static void __init igep3_flash_init(void) -{ - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP3: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* OneNAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP3: Unable to find configuration in GPMC\n"); - return; - } - - igep3_onenand_pdata.cs = onenandcs; - - if (platform_device_register(&igep3_onenand_device) < 0) - pr_err("IGEP3: Unable to register OneNAND device\n"); -} - -#else -static void __init igep3_flash_init(void) {} -#endif - -static struct regulator_consumer_supply igep3_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep3_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep3_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vio_supply, -}; - -static struct regulator_consumer_supply igep3_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc2_supply, -}; - -static struct fixed_voltage_config igep3_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep3_vmmc2, -}; - -static struct platform_device igep3_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep3_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - [0] = { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - [1] = { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep3_gpio_leds[] = { - [0] = { - .name = "gpio-led:red:d0", - .gpio = IGEP3_GPIO_LED0_RED, - .default_trigger = "default-off" - }, - [1] = { - .name = "gpio-led:green:d0", - .gpio = IGEP3_GPIO_LED0_GREEN, - .default_trigger = "default-off", - }, - [2] = { - .name = "gpio-led:red:d1", - .gpio = IGEP3_GPIO_LED1_RED, - .default_trigger = "default-off", - }, - [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", - .gpio = -EINVAL, /* gets replaced */ - }, -}; - -static struct gpio_led_platform_data igep3_led_pdata = { - .leds = igep3_gpio_leds, - .num_leds = ARRAY_SIZE(igep3_gpio_leds), -}; - -static struct platform_device igep3_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep3_led_pdata, - }, -}; - -static void __init igep3_leds_init(void) -{ - platform_device_register(&igep3_led_device); -} - -#else -static inline void igep3_leds_init(void) -{ - if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_set_value(IGEP3_GPIO_LED0_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED1_RED, 0); - gpio_set_value(IGEP3_GPIO_LED1_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); -} -#endif - -static int igep3_twl4030_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -}; - -static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .setup = igep3_twl4030_gpio_setup, -}; - -static struct twl4030_usb_data igep3_twl4030_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct platform_device *igep3_devices[] __initdata = { - &igep3_vwlan_device, -}; - -static void __init igep3_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); -} - -static struct twl4030_platform_data igep3_twl4030_pdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &igep3_twl4030_usb_data, - .gpio = &igep3_twl4030_gpio_pdata, - .vmmc1 = &igep3_vmmc1, - .vio = &igep3_vio, -}; - -static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep3_twl4030_pdata, - }, -}; - -static int __init igep3_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, - ARRAY_SIZE(igep3_i2c_boardinfo)); - - return 0; -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - -static void __init igep3_wifi_bt_init(void) -{ - /* Configure MUX values for W-LAN + Bluetooth GPIO's */ - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); - - /* Set GPIO's for W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); - - if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); -} -#else -void __init igep3_wifi_bt_init(void) {} -#endif - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init igep3_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Register I2C busses and drivers */ - igep3_i2c_init(); - platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); - omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); - - igep3_flash_init(); - igep3_leds_init(); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep3_wifi_bt_init(); - -} - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = igep3_init_early, - .init_irq = omap_init_irq, - .init_machine = igep3_init, - .timer = &omap_timer, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e2ba77957a8c..f7d6038075f0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,7 +22,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/io.h> @@ -43,47 +42,19 @@ #include <asm/delay.h> #include <plat/usb.h> +#include <plat/gpmc-smsc911x.h> #include "board-flash.h" #include "mux.h" #include "hsmmc.h" #include "control.h" +#include "common-board-devices.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 #define DEBUG_BASE 0x08000000 #define LDP_ETHR_START DEBUG_BASE -static struct resource ldp_smsc911x_resources[] = { - [0] = { - .start = LDP_ETHR_START, - .end = LDP_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config ldp_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device ldp_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ldp_smsc911x_resources), - .resource = ldp_smsc911x_resources, - .dev = { - .platform_data = &ldp_smsc911x_config, - }, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -197,82 +168,16 @@ static struct platform_device ldp_gpio_keys_device = { }, }; -static int ts_gpio; - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ads7846 irq") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info ldp_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = LDP_SMSC911X_CS, + .gpio_irq = LDP_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; static inline void __init ldp_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = LDP_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - ldp_smsc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smsc911x_resources[0].end = cs_mem_base + 0xff; - udelay(100); - - eth_gpio = LDP_SMSC911X_GPIO; - - ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&smsc911x_cfg); } static struct platform_device ldp_lcd_device = { @@ -360,19 +265,9 @@ static struct twl4030_platform_data ldp_twldata = { .keypad = &ldp_kp_twl4030_data, }; -static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &ldp_twldata, - }, -}; - static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo, - ARRAY_SIZE(ldp_i2c_boardinfo)); + omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; @@ -389,7 +284,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, &ldp_lcd_device, &ldp_gpio_keys_device, }; @@ -400,12 +294,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct mtd_partition ldp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { @@ -446,13 +334,9 @@ static void __init omap_ldp_init(void) ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); - ts_gpio = 54; - ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(ldp_spi_board_info, - ARRAY_SIZE(ldp_spi_board_info)); - ads7846_dev_init(); + omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e710cd9e079b..8d74318ed495 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -106,14 +106,13 @@ static void __init n8x0_usb_init(void) static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; /* PM companion chip power control pin */ - ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); + ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW, + "TUSB6010 enable"); if (ret != 0) { printk(KERN_ERR "Could not get TUSB power GPIO%i\n", TUSB6010_GPIO_ENABLE); return; } - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - tusb_set_power(0); ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, @@ -494,8 +493,12 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static void __init n8x0_mmc_init(void) +static struct gpio n810_emmc_gpios[] __initdata = { + { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, + { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, +}; +static void __init n8x0_mmc_init(void) { int err; @@ -512,27 +515,18 @@ static void __init n8x0_mmc_init(void) mmc1_data.slots[1].ban_openended = 1; } - err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); + err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, + "MMC slot switch"); if (err) return; - gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); - if (machine_is_nokia_n810()) { - err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } - gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - - err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request_array(n810_emmc_gpios, + ARRAY_SIZE(n810_emmc_gpios)); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - gpio_free(N810_EMMC_VSD_GPIO); return; } - gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd4a083..be71426359f2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,8 +41,8 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -52,6 +52,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "pm.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -79,6 +80,12 @@ static u8 omap3_beagle_get_rev(void) return omap3_beagle_version; } +static struct gpio omap3_beagle_rev_gpios[] __initdata = { + { 171, GPIOF_IN, "rev_id_0" }, + { 172, GPIOF_IN, "rev_id_1" }, + { 173, GPIOF_IN, "rev_id_2" }, +}; + static void __init omap3_beagle_init_rev(void) { int ret; @@ -88,21 +95,13 @@ static void __init omap3_beagle_init_rev(void) omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - ret = gpio_request(171, "rev_id_0"); - if (ret < 0) - goto fail0; - - ret = gpio_request(172, "rev_id_1"); - if (ret < 0) - goto fail1; - - ret = gpio_request(173, "rev_id_2"); - if (ret < 0) - goto fail2; - - gpio_direction_input(171); - gpio_direction_input(172); - gpio_direction_input(173); + ret = gpio_request_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + if (ret < 0) { + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + return; + } beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); @@ -128,18 +127,6 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; } - - return; - -fail2: - gpio_free(172); -fail1: - gpio_free(171); -fail0: - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - - return; } static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -173,15 +160,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3beagle_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3beagle_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -243,13 +221,10 @@ static void __init beagle_display_init(void) { int r; - r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); - if (r < 0) { + r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, + "DVI reset"); + if (r < 0) printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_dvi_device.reset_gpio, 0); } #include "sdram-micron-mt46h32m32lf-6.h" @@ -276,7 +251,7 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, usb_pwr_level; if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; @@ -295,66 +270,46 @@ static int beagle_twl_gpio_setup(struct device *dev, beagle_vmmc1_supply.dev = mmc[0].dev; beagle_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "EHCI_nOC"); - if (!r) { - r = gpio_direction_input(gpio + 1); - if (r) - gpio_free(gpio + 1); - } - if (r) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) - */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - else - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); - - /* DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - beagle_dvi_device.reset_gpio = 129; - else - beagle_dvi_device.reset_gpio = 170; - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as follows: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + * DVI reset GPIO is different between beagle revisions */ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "nDVI_PWR_EN"); - if (!r) { - r = gpio_direction_output(gpio + 1, 0); - if (r) - gpio_free(gpio + 1); - } + usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_dvi_device.reset_gpio = 129; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as below: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (DVI, serial, led blocks) + */ + r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, + "nDVI_PWR_EN"); if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request(gpio + 2, "DVI_LDO_EN"); - if (!r) { - r = gpio_direction_output(gpio + 2, 1); - if (r) - gpio_free(gpio + 2); - } + r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, + "DVI_LDO_EN"); if (r) pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); + } else { + usb_pwr_level = GPIOF_OUT_INIT_LOW; + beagle_dvi_device.reset_gpio = 170; + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + return 0; } @@ -453,15 +408,6 @@ static struct twl4030_platform_data beagle_twldata = { .vpll2 = &beagle_vpll2, }; -static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &beagle_twldata, - }, -}; - static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { { I2C_BOARD_INFO("eeprom", 0x50), @@ -470,8 +416,7 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { - omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, - ARRAY_SIZE(beagle_i2c_boardinfo)); + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); @@ -551,39 +496,6 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &keys_gpio, }; -static void __init omap3beagle_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3beagle_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3beagle_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -602,12 +514,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init beagle_opp_init(void) { int r = 0; @@ -665,13 +571,13 @@ static void __init omap3_beagle_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); + gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3beagle_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5a1a916e5cc8..b4d43464a303 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -44,12 +44,13 @@ #include <plat/usb.h> #include <plat/common.h> #include <plat/mcspi.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -101,49 +102,20 @@ static void __init omap3_evm_get_revision(void) } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -static struct resource omap3evm_smsc911x_resources[] = { - [0] = { - .start = OMAP3EVM_ETHR_START, - .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static struct platform_device omap3evm_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources), - .resource = &omap3evm_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3EVM_SMSC911X_CS, + .gpio_irq = OMAP3EVM_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init omap3evm_init_smsc911x(void) { - int eth_cs, eth_rst; struct clk *l3ck; unsigned int rate; - if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) - eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST; - else - eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST; - - eth_cs = OMAP3EVM_SMSC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -152,33 +124,13 @@ static inline void __init omap3evm_init_smsc911x(void) /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { - if (gpio_request(eth_rst, "SMSC911x gpio") < 0) { - pr_err(KERN_ERR "Failed to request %d for smsc911x\n", - eth_rst); - return; - } - - if (gpio_direction_output(eth_rst, 1) < 0) { - pr_err(KERN_ERR "Failed to set direction of %d for" \ - " smsc911x\n", eth_rst); - return; - } - /* reset pulse to ethernet controller*/ - usleep_range(150, 220); - gpio_set_value(eth_rst, 0); - usleep_range(150, 220); - gpio_set_value(eth_rst, 1); - usleep_range(1, 2); - } - - if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - OMAP3EVM_ETHR_GPIO_IRQ); - return; + if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST; + else + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST; } - gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); - platform_device_register(&omap3evm_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -197,6 +149,15 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 +static struct gpio omap3_evm_dss_gpios[] __initdata = { + { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, + { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, + { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, + { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, + { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, + { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +}; + static int lcd_enabled; static int dvi_enabled; @@ -204,61 +165,10 @@ static void __init omap3_evm_display_init(void) { int r; - r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_resb\n"); - return; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ini\n"); - goto err_1; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_qvga\n"); - goto err_2; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0); - - r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_lr\n"); - goto err_3; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ud\n"); - goto err_4; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_envdd\n"); - goto err_5; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0); - - return; - -err_5: - gpio_free(OMAP3EVM_LCD_PANEL_UD); -err_4: - gpio_free(OMAP3EVM_LCD_PANEL_LR); -err_3: - gpio_free(OMAP3EVM_LCD_PANEL_QVGA); -err_2: - gpio_free(OMAP3EVM_LCD_PANEL_INI); -err_1: - gpio_free(OMAP3EVM_LCD_PANEL_RESB); - + r = gpio_request_array(omap3_evm_dss_gpios, + ARRAY_SIZE(omap3_evm_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); } static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) @@ -448,7 +358,7 @@ static struct platform_device leds_gpio = { static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); @@ -465,16 +375,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - if (!r) - r = gpio_direction_output(gpio + TWL4030_GPIO_MAX, - (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0); + lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL"); if (r) printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -652,78 +560,18 @@ static struct twl4030_platform_data omap3evm_twldata = { .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, -}; - -static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3evm_twldata, - }, + .vmmc1 = &omap3evm_vmmc1, + .vsim = &omap3evm_vsim, }; static int __init omap3_evm_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3evm_twldata.vmmc1 = &omap3evm_vmmc1; - omap3evm_twldata.vsim = &omap3evm_vsim; - - omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, - ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_EVM_TS_GPIO); - gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, - .wakeup = true, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3evm_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; - static struct omap_board_config_kernel omap3_evm_config[] __initdata = { }; @@ -825,6 +673,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct gpio omap3_evm_ehci_gpios[] __initdata = { + { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" }, + { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -841,9 +694,6 @@ static void __init omap3_evm_init(void) omap_display_init(&omap3_evm_dss_data); - spi_register_board_info(omap3evm_spi_board_info, - ARRAY_SIZE(omap3evm_spi_board_info)); - omap_serial_init(); /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ @@ -851,16 +701,12 @@ static void __init omap3_evm_init(void) if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); - gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); - gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); - + omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP); /* Select EHCI port on main board */ - omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); - gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); - gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); + omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT, + OMAP_PIN_INPUT_PULLUP); + gpio_request_array(omap3_evm_ehci_gpios, + ARRAY_SIZE(omap3_evm_ehci_gpios)); /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); @@ -876,7 +722,7 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index b726943d7c93..60d9be49dbab 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -37,6 +37,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #include <plat/mux.h> #include <plat/board.h> @@ -93,19 +94,9 @@ static struct twl4030_platform_data omap3logic_twldata = { .vmmc1 = &omap3logic_vmmc1, }; -static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3logic_twldata, - }, -}; - static int __init omap3logic_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, - ARRAY_SIZE(omap3logic_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3logic_twldata); return 0; } @@ -147,7 +138,6 @@ static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { .cs = OMAP3LOGIC_SMSC911X_CS, .gpio_irq = -EINVAL, .gpio_reset = -EINVAL, - .flags = IORESOURCE_IRQ_LOWLEVEL, }; /* TODO/FIXME (comment by Peter Barada, LogicPD): diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 07dba888f450..1d10736c6d3c 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/wl12xx.h> @@ -46,12 +45,13 @@ #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> -#include <plat/display.h> +#include <video/omapdss.h> #include <plat/nand.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -305,24 +305,13 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; - ret = gpio_request(gpio_32khz, "wifi 32kHz"); + ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); if (ret < 0) { pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail; - } - - ret = gpio_direction_output(gpio_32khz, 1); - if (ret < 0) { - pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail_direction; + return -ENODEV; } return 0; - -fail_direction: - gpio_free(gpio_32khz); -fail: - return -ENODEV; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { @@ -544,15 +533,6 @@ static struct twl4030_platform_data omap3pandora_twldata = { .bci = &pandora_bci_data, }; -static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3pandora_twldata, - }, -}; - static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { { I2C_BOARD_INFO("bq27500", 0x55), @@ -562,61 +542,15 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, - ARRAY_SIZE(omap3pandora_i2c_boardinfo)); + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, ARRAY_SIZE(omap3pandora_i2c3_boardinfo)); return 0; } -static void __init omap3pandora_ads7846_init(void) -{ - int gpio = OMAP3_PANDORA_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_PANDORA_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), - .platform_data = &ads7846_config, - }, { .modalias = "tpo_td043mtea1_panel_spi", .bus_num = 1, .chip_select = 1, @@ -639,14 +573,10 @@ static void __init pandora_wl1251_init(void) memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq"); + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); if (ret < 0) goto fail; - ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO); - if (ret < 0) - goto fail_irq; - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); if (pandora_wl1251_pdata.irq < 0) goto fail_irq; @@ -688,12 +618,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -705,9 +629,9 @@ static void __init omap3pandora_init(void) omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); - omap3pandora_ads7846_init(); + omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a6e0b9161c99..0c108a212ea2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -39,13 +39,12 @@ #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> #include <linux/i2c/at24.h> @@ -54,52 +53,28 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include <plat/gpmc-smsc911x.h> + #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 #define OMAP3STALKER_ETHR_GPIO_IRQ 19 #define OMAP3STALKER_SMC911X_CS 5 -static struct resource omap3stalker_smsc911x_resources[] = { - [0] = { - .start = OMAP3STALKER_ETHR_START, - .end = - (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3STALKER_SMC911X_CS, + .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), }; -static struct platform_device omap3stalker_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources), - .resource = &omap3stalker_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, -}; - static inline void __init omap3stalker_init_eth(void) { - int eth_cs; struct clk *l3ck; unsigned int rate; - eth_cs = OMAP3STALKER_SMC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -107,16 +82,7 @@ static inline void __init omap3stalker_init_eth(void) rate = clk_get_rate(l3ck); omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { - printk(KERN_ERR - "Failed to request GPIO%d for smc911x IRQ\n", - OMAP3STALKER_ETHR_GPIO_IRQ); - return; - } - - gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ); - - platform_device_register(&omap3stalker_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -365,12 +331,11 @@ omap3stalker_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "EN_LCD_BKL"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -489,15 +454,8 @@ static struct twl4030_platform_data omap3stalker_twldata = { .codec = &omap3stalker_codec_data, .vdac = &omap3_stalker_vdac, .vpll2 = &omap3_stalker_vpll2, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3stalker_twldata, - }, + .vmmc1 = &omap3stalker_vmmc1, + .vsim = &omap3stalker_vsim, }; static struct at24_platform_data fram_info = { @@ -516,15 +474,7 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1; - omap3stalker_twldata.vsim = &omap3stalker_vsim; - - omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo, - ARRAY_SIZE(omap3stalker_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); @@ -532,49 +482,6 @@ static int __init omap3_stalker_i2c_init(void) } #define OMAP3_STALKER_TS_GPIO 175 -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_STALKER_TS_GPIO); - gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_STALKER_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3stalker_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; @@ -618,12 +525,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_stalker_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); @@ -636,13 +537,11 @@ static void __init omap3_stalker_init(void) ARRAY_SIZE(omap3_stalker_devices)); omap_display_init(&omap3_stalker_dss_data); - spi_register_board_info(omap3stalker_spi_board_info, - ARRAY_SIZE(omap3stalker_spi_board_info)); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 127cb1752bdd..82872d7d313b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -52,6 +52,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #include <asm/setup.h> @@ -95,15 +96,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3touchbook_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3touchbook_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -154,13 +146,11 @@ static int touchbook_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -273,15 +263,6 @@ static struct twl4030_platform_data touchbook_twldata = { .vpll2 = &touchbook_vpll2, }; -static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &touchbook_twldata, - }, -}; - static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { { I2C_BOARD_INFO("bq27200", 0x55), @@ -291,8 +272,7 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, - ARRAY_SIZE(touchbook_i2c_boardinfo)); + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, @@ -301,19 +281,7 @@ static int __init omap3_touchbook_i2c_init(void) return 0; } -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - gpio_set_debounce(OMAP3_TS_GPIO, 310); -} - -static struct ads7846_platform_data ads7846_config = { +static struct ads7846_platform_data ads7846_pdata = { .x_min = 100, .y_min = 265, .x_max = 3950, @@ -327,23 +295,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - static struct gpio_led gpio_leds[] = { { .name = "touchbook::usr0", @@ -434,39 +385,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = { &keys_gpio, }; -static void __init omap3touchbook_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3touchbook_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -481,15 +399,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static void omap3_touchbook_poweroff(void) { - int r; + int pwr_off = TB_KILL_POWER_GPIO; - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { + if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); } static int __init early_touchbook_revision(char *p) @@ -501,12 +414,6 @@ static int __init early_touchbook_revision(char *p) } early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -521,17 +428,15 @@ static void __init omap3_touchbook_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(176, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(176, true); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); /* Touchscreen and accelerometer */ - spi_register_board_info(omap3_ads7846_spi_board_info, - ARRAY_SIZE(omap3_ads7846_spi_board_info)); - omap3_ads7846_init(); - usb_musb_init(&musb_board_data); + omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3touchbook_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index f3a7b1011914..90485fced973 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -34,18 +34,19 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <plat/display.h> +#include <video/omapdss.h> #include <plat/board.h> #include <plat/common.h> #include <plat/usb.h> #include <plat/mmc.h> -#include <plat/panel-generic-dpi.h> +#include <video/omap-panel-generic-dpi.h> #include "timer-gp.h" #include "hsmmc.h" #include "control.h" #include "mux.h" +#include "common-board-devices.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 @@ -111,6 +112,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct gpio panda_ehci_gpios[] __initdata = { + { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, + { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, +}; + static void __init omap4_ehci_init(void) { int ret; @@ -120,44 +126,27 @@ static void __init omap4_ehci_init(void) phy_ref_clk = clk_get(NULL, "auxclk3_ck"); if (IS_ERR(phy_ref_clk)) { pr_err("Cannot request auxclk3\n"); - goto error1; + return; } clk_set_rate(phy_ref_clk, 19200000); clk_enable(phy_ref_clk); - /* disable the power to the usb hub prior to init */ - ret = gpio_request(GPIO_HUB_POWER, "hub_power"); + /* disable the power to the usb hub prior to init and reset phy+hub */ + ret = gpio_request_array(panda_ehci_gpios, + ARRAY_SIZE(panda_ehci_gpios)); if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER); - goto error1; + pr_err("Unable to initialize EHCI power/reset\n"); + return; } - gpio_export(GPIO_HUB_POWER, 0); - gpio_direction_output(GPIO_HUB_POWER, 0); - gpio_set_value(GPIO_HUB_POWER, 0); - /* reset phy+hub */ - ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset"); - if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET); - goto error2; - } + gpio_export(GPIO_HUB_POWER, 0); gpio_export(GPIO_HUB_NRESET, 0); - gpio_direction_output(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); - return; - -error2: - gpio_free(GPIO_HUB_POWER); -error1: - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } static struct omap_musb_board_data musb_board_data = { @@ -408,15 +397,6 @@ static struct twl4030_platform_data omap4_panda_twldata = { .usb = &omap4_usbphy_data, }; -static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &omap4_panda_twldata, - }, -}; - /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM * is connected as I2C slave device, and can be accessed at address 0x50 @@ -429,12 +409,7 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = { static int __init omap4_panda_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, - ARRAY_SIZE(omap4_panda_i2c_boardinfo)); + omap4_pmic_init("twl6030", &omap4_panda_twldata); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP @@ -651,27 +626,19 @@ static void omap4_panda_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio panda_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(panda_hdmi_gpios, + ARRAY_SIZE(panda_hdmi_gpios)); + if (status) + pr_err("Cannot request HDMI GPIOs\n"); return status; } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 59ca33326b8c..1555918e3ffa 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -43,8 +43,8 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/display.h> -#include <plat/panel-generic-dpi.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> #include <mach/gpio.h> #include <plat/gpmc.h> #include <mach/hardware.h> @@ -56,6 +56,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 @@ -74,30 +75,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <linux/spi/ads7846.h> - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OVERO_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - /* fixed regulator for ads7846 */ static struct regulator_consumer_supply ads7846_supply = REGULATOR_SUPPLY("vcc", "spi1.0"); @@ -128,14 +105,7 @@ static struct platform_device vads7846_device = { static void __init overo_ads7846_init(void) { - if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) { - gpio_export(OVERO_GPIO_PENDOWN, 0); - } else { - printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - + omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); platform_device_register(&vads7846_device); } @@ -146,106 +116,28 @@ static inline void __init overo_ads7846_init(void) { return; } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct resource overo_smsc911x_resources[] = { - { - .name = "smsc911x-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct resource overo_smsc911x2_resources[] = { - { - .name = "smsc911x2-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config overo_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device overo_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = overo_smsc911x_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X_CS, + .gpio_irq = OVERO_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device overo_smsc911x2_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x2_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(overo_smsc911x2_resources), - .resource = overo_smsc911x2_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X2_CS, + .gpio_irq = OVERO_SMSC911X2_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device *smsc911x_devices[] = { - &overo_smsc911x_device, - &overo_smsc911x2_device, -}; - -static inline void __init overo_init_smsc911x(void) +static void __init overo_init_smsc911x(void) { - unsigned long cs_mem_base, cs_mem_base2; - - /* set up first smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); - return; - } - - overo_smsc911x_resources[0].start = cs_mem_base + 0x0; - overo_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); - overo_smsc911x_resources[1].end = 0; - - /* set up second smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n"); - return; - } - - overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0; - overo_smsc911x2_resources[0].end = cs_mem_base2 + 0xff; - - if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X2_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n"); - return; - } - - overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO); - overo_smsc911x2_resources[1].end = 0; - - platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices)); + gpmc_smsc911x_init(&smsc911x_cfg); + gpmc_smsc911x_init(&smsc911x2_cfg); } #else @@ -259,21 +151,20 @@ static int dvi_enabled; #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 +static struct gpio overo_dss_gpios[] __initdata = { + { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, + { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, +}; + static void __init overo_display_init(void) { - if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_EN, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_EN\n"); + if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { + printk(KERN_ERR "could not obtain DSS control GPIOs\n"); + return; + } - if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_BL, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_BL\n"); + gpio_export(OVERO_GPIO_LCD_EN, 0); + gpio_export(OVERO_GPIO_LCD_BL, 0); } static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -412,45 +303,6 @@ static struct mtd_partition overo_nand_partitions[] = { }, }; -static struct omap_nand_platform_data overo_nand_data = { - .parts = overo_nand_partitions, - .nr_parts = ARRAY_SIZE(overo_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - -static void __init overo_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - overo_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&overo_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -648,37 +500,15 @@ static struct twl4030_platform_data overo_twldata = { .vpll2 = &overo_vpll2, }; -static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &overo_twldata, - }, -}; - static int __init overo_i2c_init(void) { - omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo, - ARRAY_SIZE(overo_i2c_boardinfo)); + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); return 0; } static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -#endif #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { @@ -722,20 +552,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, +static struct gpio overo_bt_gpios[] __initdata = { + { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; static void __init overo_init(void) { + int ret; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); - overo_flash_init(); - usb_musb_init(&musb_board_data); + omap_nand_flash_init(0, overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions)); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_ads7846_init(); @@ -748,9 +580,9 @@ static void __init overo_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - if ((gpio_request(OVERO_GPIO_W2W_NRESET, - "OVERO_GPIO_W2W_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_W2W_NRESET"); + if (ret == 0) { gpio_export(OVERO_GPIO_W2W_NRESET, 0); gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); udelay(10); @@ -760,25 +592,20 @@ static void __init overo_init(void) "OVERO_GPIO_W2W_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); + if (ret) { + pr_err("%s: could not obtain BT gpios\n", __func__); + } else { gpio_export(OVERO_GPIO_BT_XGATE, 0); - else - printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); - - if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { gpio_export(OVERO_GPIO_BT_NRESET, 0); gpio_set_value(OVERO_GPIO_BT_NRESET, 0); mdelay(6); gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } else { - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_BT_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && - (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_USBH_CPEN"); + if (ret == 0) gpio_export(OVERO_GPIO_USBH_CPEN, 0); else printk(KERN_ERR "could not obtain gpio for " diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 2af8b05e786d..42d10b12da3c 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-nokia.h" +#include "common-board-devices.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), @@ -90,19 +91,9 @@ static struct twl4030_platform_data rm680_twl_data = { /* add rest of the children here */ }; -static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = { - { - I2C_BOARD_INFO("twl5031", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rm680_twl_data, - }, -}; - static void __init rm680_i2c_init(void) { - omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info, - ARRAY_SIZE(rm680_twl_i2c_board_info)); + omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } @@ -153,17 +144,11 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data rm680_musb_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, - .power = 100, -}; - static void __init rm680_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); - usb_musb_init(&rm680_musb_data); + usb_musb_init(NULL); rm680_peripherals_init(); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb6775a6a3..2b00f72e8e36 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -43,6 +43,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -557,10 +558,8 @@ static __init void rx51_init_si4713(void) static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ - gpio_request(gpio + 6, "backlight_pwm"); - gpio_direction_output(gpio + 6, 0); - gpio_request(gpio + 7, "speaker_en"); - gpio_direction_output(gpio + 7, 1); + gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); return 0; } @@ -730,7 +729,7 @@ static struct twl4030_resconfig twl4030_rconfig[] __initdata = { { .resource = RES_RESET, .devgroup = -1, .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 }, - { .resource = RES_Main_Ref, .devgroup = -1, + { .resource = RES_MAIN_REF, .devgroup = -1, .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 }, { 0, 0}, @@ -777,15 +776,6 @@ static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = .power_gpio = 98, }; -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rx51_twldata, - }, -}; - /* Audio setup data */ static struct aic3x_setup_data rx51_aic34_setup = { .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, @@ -833,8 +823,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; - omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); @@ -921,26 +910,20 @@ static void rx51_wl1251_set_power(bool enable) gpio_set_value(RX51_WL1251_POWER_GPIO, enable); } +static struct gpio rx51_wl1251_gpios[] __initdata = { + { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, + { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, +}; + static void __init rx51_init_wl1251(void) { int irq, ret; - ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power"); + ret = gpio_request_array(rx51_wl1251_gpios, + ARRAY_SIZE(rx51_wl1251_gpios)); if (ret < 0) goto error; - ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0); - if (ret < 0) - goto err_power; - - ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq"); - if (ret < 0) - goto err_power; - - ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO); - if (ret < 0) - goto err_irq; - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); if (irq < 0) goto err_irq; @@ -952,10 +935,7 @@ static void __init rx51_init_wl1251(void) err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - -err_power: gpio_free(RX51_WL1251_POWER_GPIO); - error: printk(KERN_ERR "wl1251 board initialisation failed\n"); wl1251_pdata.set_power = NULL; diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 89a66db8b77d..2c1289bd5e6a 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -15,7 +15,7 @@ #include <linux/spi/spi.h> #include <linux/mm.h> #include <asm/mach-types.h> -#include <plat/display.h> +#include <video/omapdss.h> #include <plat/vram.h> #include <plat/mcspi.h> @@ -76,13 +76,12 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "LCD ACX565AKM reset")) { pr_err("%s failed to get LCD Reset GPIO\n", __func__); return 0; } - gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f8ba20a14e62..fec4cac8fa0a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -58,21 +58,25 @@ static struct platform_device leds_gpio = { }, }; +/* + * cpuidle C-states definition override from the default values. + * The 'exit_latency' field is the sum of sleep and wake-up latencies. + */ static struct cpuidle_params rx51_cpuidle_params[] = { /* C1 */ - {1, 110, 162, 5}, + {110 + 162, 5 , 1}, /* C2 */ - {1, 106, 180, 309}, + {106 + 180, 309, 1}, /* C3 */ - {0, 107, 410, 46057}, + {107 + 410, 46057, 0}, /* C4 */ - {0, 121, 3374, 46057}, + {121 + 3374, 46057, 0}, /* C5 */ - {1, 855, 1146, 46057}, + {855 + 1146, 46057, 1}, /* C6 */ - {0, 7580, 4134, 484329}, + {7580 + 4134, 484329, 0}, /* C7 */ - {1, 7505, 15274, 484329}, + {7505 + 15274, 484329, 1}, }; static struct omap_lcd_config rx51_lcd_config = { diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 007ebdc6c993..6402e781c458 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <plat/gpmc.h> +#include <plat/gpmc-smsc911x.h> #include <mach/board-zoom.h> @@ -26,60 +27,16 @@ #define DEBUG_BASE 0x08000000 #define ZOOM_ETHR_START DEBUG_BASE -static struct resource zoom_smsc911x_resources[] = { - [0] = { - .start = ZOOM_ETHR_START, - .end = ZOOM_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config zoom_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = { + .cs = ZOOM_SMSC911X_CS, + .gpio_irq = ZOOM_SMSC911X_GPIO, + .gpio_reset = -EINVAL, .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device zoom_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(zoom_smsc911x_resources), - .resource = zoom_smsc911x_resources, - .dev = { - .platform_data = &zoom_smsc911x_config, - }, }; static inline void __init zoom_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = ZOOM_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - zoom_smsc911x_resources[0].start = cs_mem_base + 0x0; - zoom_smsc911x_resources[0].end = cs_mem_base + 0xff; - - eth_gpio = ZOOM_SMSC911X_GPIO; - - zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&zoom_smsc911x_cfg); } static struct plat_serial8250_port serial_platform_data[] = { @@ -120,12 +77,9 @@ static inline void __init zoom_init_quaduart(void) quart_gpio = ZOOM_QUADUART_GPIO; - if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); - return; - } - gpio_direction_input(quart_gpio); } static inline int omap_zoom_debugboard_detect(void) @@ -135,12 +89,12 @@ static inline int omap_zoom_debugboard_detect(void) debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + if (gpio_request_one(debug_board_detect, GPIOF_IN, + "Zoom debug board detect") < 0) { printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } - gpio_direction_input(debug_board_detect); if (!gpio_get_value(debug_board_detect)) { ret = 0; @@ -150,7 +104,6 @@ static inline int omap_zoom_debugboard_detect(void) } static struct platform_device *zoom_devices[] __initdata = { - &zoom_smsc911x_device, &zoom_debugboard_serial_device, }; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 37b84c2b850f..c7c6beb1ec24 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -15,40 +15,25 @@ #include <linux/i2c/twl.h> #include <linux/spi/spi.h> #include <plat/mcspi.h> -#include <plat/display.h> +#include <video/omapdss.h> #define LCD_PANEL_RESET_GPIO_PROD 96 #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 +static struct gpio zoom_lcd_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, + { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +}; + static void zoom_lcd_panel_init(void) { - int ret; - unsigned char lcd_panel_reset_gpio; - - lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : LCD_PANEL_RESET_GPIO_PILOT; - ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); - if (ret) { - pr_err("Failed to get LCD reset GPIO (gpio%d).\n", - lcd_panel_reset_gpio); - return; - } - gpio_direction_output(lcd_panel_reset_gpio, 1); - - ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); - if (ret) { - pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", - LCD_PANEL_QVGA_GPIO); - goto err0; - } - gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); - - return; -err0: - gpio_free(lcd_panel_reset_gpio); + if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) + pr_err("%s: Failed to get LCD GPIOs.\n", __func__); } static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8dee7549fbdf..118c6f53c5eb 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) @@ -276,13 +277,11 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); - if (ret) { + ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, + "lcd enable"); + if (ret) pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", LCD_PANEL_ENABLE_GPIO); - return ret; - } - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); return ret; } @@ -349,15 +348,6 @@ static struct twl4030_platform_data zoom_twldata = { .vdac = &zoom_vdac, }; -static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom_twldata, - }, -}; - static int __init omap_i2c_init(void) { if (machine_is_omap_zoom2()) { @@ -365,19 +355,12 @@ static int __init omap_i2c_init(void) zoom_audio_data.hs_extmute = 1; zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; } - omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, - ARRAY_SIZE(zoom_i2c_boardinfo)); + omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */ @@ -392,7 +375,7 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); platform_device_register(&omap_vwlan_device); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); enable_board_wakeup_source(); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c new file mode 100644 index 000000000000..e94903b2c65b --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -0,0 +1,163 @@ +/* + * common-board-devices.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> +#include <linux/i2c/twl.h> + +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <plat/i2c.h> +#include <plat/mcspi.h> +#include <plat/nand.h> + +#include "common-board-devices.h" + +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .gpio_pendown = -EINVAL, + .keep_vref_on = 1, +}; + +static struct spi_board_info ads7846_spi_board_info __initdata = { + .modalias = "ads7846", + .bus_num = -EINVAL, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = -EINVAL, + .platform_data = &ads7846_config, +}; + +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ + struct spi_board_info *spi_bi = &ads7846_spi_board_info; + int err; + + err = gpio_request(gpio_pendown, "TS PenDown"); + if (err) { + pr_err("Could not obtain gpio for TS PenDown: %d\n", err); + return; + } + + gpio_direction_input(gpio_pendown); + gpio_export(gpio_pendown, 0); + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + ads7846_config.gpio_pendown = gpio_pendown; + + spi_bi->bus_num = bus_num; + spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + + if (board_pdata) + spi_bi->platform_data = board_pdata; + + spi_register_board_info(&ads7846_spi_board_info, 1); +} +#else +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +static struct omap_nand_platform_data nand_data = { + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + nand_data.cs = nandcs; + nand_data.parts = parts; + nand_data.nr_parts = nr_parts; + nand_data.options = options; + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (gpmc_nand_init(&nand_data) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +#else +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ +} +#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h new file mode 100644 index 000000000000..eb80b3b0ef47 --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -0,0 +1,35 @@ +#ifndef __OMAP_COMMON_BOARD_DEVICES__ +#define __OMAP_COMMON_BOARD_DEVICES__ + +struct twl4030_platform_data; +struct mtd_partition; + +void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data); + +static inline void omap2_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); +} + +static inline void omap3_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); +} + +static inline void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); +} + +struct ads7846_platform_data; + +void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata); +void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); + +#endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1c240eff3918..4bf6e6e8b100 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,36 +36,6 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 7 -#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */ -#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */ -#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */ -#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */ -#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ -#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ - -#define OMAP3_STATE_MAX OMAP3_STATE_C7 - -#define CPUIDLE_FLAG_CHECK_BM 0x10000 /* use omap3_enter_idle_bm() */ - -struct omap3_processor_cx { - u8 valid; - u8 type; - u32 sleep_latency; - u32 wakeup_latency; - u32 mpu_state; - u32 core_state; - u32 threshold; - u32 flags; - const char *desc; -}; - -struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; -struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd, *core_pd, *per_pd; -struct powerdomain *cam_pd; - /* * The latencies/thresholds for various C states have * to be configured from the respective board files. @@ -75,27 +45,31 @@ struct powerdomain *cam_pd; */ static struct cpuidle_params cpuidle_params_table[] = { /* C1 */ - {1, 2, 2, 5}, + {2 + 2, 5, 1}, /* C2 */ - {1, 10, 10, 30}, + {10 + 10, 30, 1}, /* C3 */ - {1, 50, 50, 300}, + {50 + 50, 300, 1}, /* C4 */ - {1, 1500, 1800, 4000}, + {1500 + 1800, 4000, 1}, /* C5 */ - {1, 2500, 7500, 12000}, + {2500 + 7500, 12000, 1}, /* C6 */ - {1, 3000, 8500, 15000}, + {3000 + 8500, 15000, 1}, /* C7 */ - {1, 10000, 30000, 300000}, + {10000 + 30000, 300000, 1}, }; +#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table) -static int omap3_idle_bm_check(void) -{ - if (!omap3_can_sleep()) - return 1; - return 0; -} +/* Mach specific information to be recorded in the C-state driver_data */ +struct omap3_idle_statedata { + u32 mpu_state; + u32 core_state; + u8 valid; +}; +struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; + +struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) @@ -122,12 +96,10 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, static int omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct omap3_processor_cx *cx = cpuidle_get_statedata(state); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(state); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; - current_cx_state = *cx; - /* Used to keep track of the total time in idle */ getnstimeofday(&ts_preidle); @@ -140,7 +112,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, if (omap_irq_pending() || need_resched()) goto return_sleep_time; - if (cx->type == OMAP3_STATE_C1) { + /* Deny idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } @@ -148,7 +121,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, /* Execute ARM wfi */ omap_sram_idle(); - if (cx->type == OMAP3_STATE_C1) { + /* Re-allow idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); } @@ -164,41 +138,53 @@ return_sleep_time: } /** - * next_valid_state - Find next valid c-state + * next_valid_state - Find next valid C-state * @dev: cpuidle device - * @state: Currently selected c-state + * @state: Currently selected C-state * * If the current state is valid, it is returned back to the caller. * Else, this function searches for a lower c-state which is still - * valid (as defined in omap3_power_states[]). + * valid. + * + * A state is valid if the 'valid' field is enabled and + * if it satisfies the enable_off_mode condition. */ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, - struct cpuidle_state *curr) + struct cpuidle_state *curr) { struct cpuidle_state *next = NULL; - struct omap3_processor_cx *cx; + struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); + u32 mpu_deepest_state = PWRDM_POWER_RET; + u32 core_deepest_state = PWRDM_POWER_RET; - cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr); + if (enable_off_mode) { + mpu_deepest_state = PWRDM_POWER_OFF; + /* + * Erratum i583: valable for ES rev < Es1.2 on 3630. + * CORE OFF mode is not supported in a stable form, restrict + * instead the CORE state to RET. + */ + if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) + core_deepest_state = PWRDM_POWER_OFF; + } /* Check if current state is valid */ - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { return curr; } else { - u8 idx = OMAP3_STATE_MAX; + int idx = OMAP3_NUM_STATES - 1; - /* - * Reach the current state starting at highest C-state - */ - for (; idx >= OMAP3_STATE_C1; idx--) { + /* Reach the current state starting at highest C-state */ + for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { next = &dev->states[idx]; break; } } - /* - * Should never hit this condition. - */ + /* Should never hit this condition */ WARN_ON(next == NULL); /* @@ -206,17 +192,17 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * Start search from the next (lower) state. */ idx--; - for (; idx >= OMAP3_STATE_C1; idx--) { - struct omap3_processor_cx *cx; - + for (; idx >= 0; idx--) { cx = cpuidle_get_statedata(&dev->states[idx]); - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { next = &dev->states[idx]; break; } } /* - * C1 and C2 are always valid. + * C1 is always valid. * So, no need to check for 'next==NULL' outside this loop. */ } @@ -229,36 +215,22 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * @dev: cpuidle device * @state: The target state to be programmed * - * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This - * function checks for any pending activity and then programs the - * device to the specified or a safer state. + * This function checks for any pending activity and then programs + * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct cpuidle_state *new_state = next_valid_state(dev, state); - u32 core_next_state, per_next_state = 0, per_saved_state = 0; - u32 cam_state; - struct omap3_processor_cx *cx; + struct cpuidle_state *new_state; + u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; + struct omap3_idle_statedata *cx; int ret; - if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { - BUG_ON(!dev->safe_state); + if (!omap3_can_sleep()) { new_state = dev->safe_state; goto select_state; } - cx = cpuidle_get_statedata(state); - core_next_state = cx->core_state; - - /* - * FIXME: we currently manage device-specific idle states - * for PER and CORE in combination with CPU-specific - * idle states. This is wrong, and device-specific - * idle management needs to be separated out into - * its own code. - */ - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. @@ -270,9 +242,19 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, } /* + * FIXME: we currently manage device-specific idle states + * for PER and CORE in combination with CPU-specific + * idle states. This is wrong, and device-specific + * idle management needs to be separated out into + * its own code. + */ + + /* * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ + cx = cpuidle_get_statedata(state); + core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && (core_next_state > PWRDM_POWER_RET)) @@ -282,6 +264,8 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); + new_state = next_valid_state(dev, state); + select_state: dev->last_state = new_state; ret = omap3_enter_idle(dev, new_state); @@ -295,31 +279,6 @@ select_state: DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -/** - * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states up to and including this for mpu domain - * @core_deepest_state: Enable states up to and including this for core domain - * - * This goes through the list of states available and enables and disables the - * validity of C states based on deepest state that can be achieved for the - * variable domain - */ -void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state) -{ - int i; - - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - struct omap3_processor_cx *cx = &omap3_power_states[i]; - - if ((cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { - cx->valid = 1; - } else { - cx->valid = 0; - } - } -} - void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) { int i; @@ -327,212 +286,109 @@ void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) if (!cpuidle_board_params) return; - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cpuidle_params_table[i].valid = - cpuidle_board_params[i].valid; - cpuidle_params_table[i].sleep_latency = - cpuidle_board_params[i].sleep_latency; - cpuidle_params_table[i].wake_latency = - cpuidle_board_params[i].wake_latency; - cpuidle_params_table[i].threshold = - cpuidle_board_params[i].threshold; + for (i = 0; i < OMAP3_NUM_STATES; i++) { + cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; + cpuidle_params_table[i].exit_latency = + cpuidle_board_params[i].exit_latency; + cpuidle_params_table[i].target_residency = + cpuidle_board_params[i].target_residency; } return; } -/* omap3_init_power_states - Initialises the OMAP3 specific C states. - * - * Below is the desciption of each C state. - * C1 . MPU WFI + Core active - * C2 . MPU WFI + Core inactive - * C3 . MPU CSWR + Core inactive - * C4 . MPU OFF + Core inactive - * C5 . MPU CSWR + Core CSWR - * C6 . MPU OFF + Core CSWR - * C7 . MPU OFF + Core OFF - */ -void omap_init_power_states(void) -{ - /* C1 . MPU WFI + Core active */ - omap3_power_states[OMAP3_STATE_C1].valid = - cpuidle_params_table[OMAP3_STATE_C1].valid; - omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C1].sleep_latency; - omap3_power_states[OMAP3_STATE_C1].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C1].wake_latency; - omap3_power_states[OMAP3_STATE_C1].threshold = - cpuidle_params_table[OMAP3_STATE_C1].threshold; - omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; - omap3_power_states[OMAP3_STATE_C1].desc = "MPU ON + CORE ON"; - - /* C2 . MPU WFI + Core inactive */ - omap3_power_states[OMAP3_STATE_C2].valid = - cpuidle_params_table[OMAP3_STATE_C2].valid; - omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C2].sleep_latency; - omap3_power_states[OMAP3_STATE_C2].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C2].wake_latency; - omap3_power_states[OMAP3_STATE_C2].threshold = - cpuidle_params_table[OMAP3_STATE_C2].threshold; - omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C2].desc = "MPU ON + CORE ON"; - - /* C3 . MPU CSWR + Core inactive */ - omap3_power_states[OMAP3_STATE_C3].valid = - cpuidle_params_table[OMAP3_STATE_C3].valid; - omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C3].sleep_latency; - omap3_power_states[OMAP3_STATE_C3].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C3].wake_latency; - omap3_power_states[OMAP3_STATE_C3].threshold = - cpuidle_params_table[OMAP3_STATE_C3].threshold; - omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C3].desc = "MPU RET + CORE ON"; - - /* C4 . MPU OFF + Core inactive */ - omap3_power_states[OMAP3_STATE_C4].valid = - cpuidle_params_table[OMAP3_STATE_C4].valid; - omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C4].sleep_latency; - omap3_power_states[OMAP3_STATE_C4].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C4].wake_latency; - omap3_power_states[OMAP3_STATE_C4].threshold = - cpuidle_params_table[OMAP3_STATE_C4].threshold; - omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C4].desc = "MPU OFF + CORE ON"; - - /* C5 . MPU CSWR + Core CSWR*/ - omap3_power_states[OMAP3_STATE_C5].valid = - cpuidle_params_table[OMAP3_STATE_C5].valid; - omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C5].sleep_latency; - omap3_power_states[OMAP3_STATE_C5].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C5].wake_latency; - omap3_power_states[OMAP3_STATE_C5].threshold = - cpuidle_params_table[OMAP3_STATE_C5].threshold; - omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C5].desc = "MPU RET + CORE RET"; - - /* C6 . MPU OFF + Core CSWR */ - omap3_power_states[OMAP3_STATE_C6].valid = - cpuidle_params_table[OMAP3_STATE_C6].valid; - omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C6].sleep_latency; - omap3_power_states[OMAP3_STATE_C6].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C6].wake_latency; - omap3_power_states[OMAP3_STATE_C6].threshold = - cpuidle_params_table[OMAP3_STATE_C6].threshold; - omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C6].desc = "MPU OFF + CORE RET"; - - /* C7 . MPU OFF + Core OFF */ - omap3_power_states[OMAP3_STATE_C7].valid = - cpuidle_params_table[OMAP3_STATE_C7].valid; - omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; - omap3_power_states[OMAP3_STATE_C7].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C7].sleep_latency; - omap3_power_states[OMAP3_STATE_C7].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C7].wake_latency; - omap3_power_states[OMAP3_STATE_C7].threshold = - cpuidle_params_table[OMAP3_STATE_C7].threshold; - omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C7].desc = "MPU OFF + CORE OFF"; - - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions. - * we disable C7 state as a result. - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { - omap3_power_states[OMAP3_STATE_C7].valid = 0; - cpuidle_params_table[OMAP3_STATE_C7].valid = 0; - pr_warn("%s: core off state C7 disabled due to i583\n", - __func__); - } -} - struct cpuidle_driver omap3_idle_driver = { .name = "omap3_idle", .owner = THIS_MODULE, }; +/* Helper to fill the C-state common data and register the driver_data */ +static inline struct omap3_idle_statedata *_fill_cstate( + struct cpuidle_device *dev, + int idx, const char *descr) +{ + struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; + struct cpuidle_state *state = &dev->states[idx]; + + state->exit_latency = cpuidle_params_table[idx].exit_latency; + state->target_residency = cpuidle_params_table[idx].target_residency; + state->flags = CPUIDLE_FLAG_TIME_VALID; + state->enter = omap3_enter_idle_bm; + cx->valid = cpuidle_params_table[idx].valid; + sprintf(state->name, "C%d", idx + 1); + strncpy(state->desc, descr, CPUIDLE_DESC_LEN); + cpuidle_set_statedata(state, cx); + + return cx; +} + /** * omap3_idle_init - Init routine for OMAP3 idle * - * Registers the OMAP3 specific cpuidle driver with the cpuidle + * Registers the OMAP3 specific cpuidle driver to the cpuidle * framework with the valid set of states. */ int __init omap3_idle_init(void) { - int i, count = 0; - struct omap3_processor_cx *cx; - struct cpuidle_state *state; struct cpuidle_device *dev; + struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); - omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cx = &omap3_power_states[i]; - state = &dev->states[count]; - - if (!cx->valid) - continue; - cpuidle_set_statedata(state, cx); - state->exit_latency = cx->sleep_latency + cx->wakeup_latency; - state->target_residency = cx->threshold; - state->flags = cx->flags; - state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? - omap3_enter_idle_bm : omap3_enter_idle; - if (cx->type == OMAP3_STATE_C1) - dev->safe_state = state; - sprintf(state->name, "C%d", count+1); - strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); - count++; - } + /* C1 . MPU WFI + Core active */ + cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); + (&dev->states[0])->enter = omap3_enter_idle; + dev->safe_state = &dev->states[0]; + cx->valid = 1; /* C1 is always valid */ + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; - if (!count) - return -EINVAL; - dev->state_count = count; + /* C2 . MPU WFI + Core inactive */ + cx = _fill_cstate(dev, 1, "MPU ON + CORE ON"); + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; + + /* C3 . MPU CSWR + Core inactive */ + cx = _fill_cstate(dev, 2, "MPU RET + CORE ON"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_ON; - if (enable_off_mode) - omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF); - else - omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET); + /* C4 . MPU OFF + Core inactive */ + cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_ON; + + /* C5 . MPU RET + Core RET */ + cx = _fill_cstate(dev, 4, "MPU RET + CORE RET"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_RET; + + /* C6 . MPU OFF + Core RET */ + cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_RET; + + /* C7 . MPU OFF + Core OFF */ + cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF"); + /* + * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot + * enable OFF mode in a stable form for previous revisions. + * We disable C7 state as a result. + */ + if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { + cx->valid = 0; + pr_warn("%s: core off state C7 disabled due to i583\n", + __func__); + } + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_OFF; + dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 256d23fb79ab..543fcb8b518c 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -22,7 +22,7 @@ #include <linux/clk.h> #include <linux/err.h> -#include <plat/display.h> +#include <video/omapdss.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> @@ -56,37 +56,58 @@ static bool opt_clock_available(const char *clk_role) return false; } +struct omap_dss_hwmod_data { + const char *oh_name; + const char *dev_name; + const int id; +}; + +static const struct omap_dss_hwmod_data omap2_dss_hwmod_data[] __initdata = { + { "dss_core", "omapdss_dss", -1 }, + { "dss_dispc", "omapdss_dispc", -1 }, + { "dss_rfbi", "omapdss_rfbi", -1 }, + { "dss_venc", "omapdss_venc", -1 }, +}; + +static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = { + { "dss_core", "omapdss_dss", -1 }, + { "dss_dispc", "omapdss_dispc", -1 }, + { "dss_rfbi", "omapdss_rfbi", -1 }, + { "dss_venc", "omapdss_venc", -1 }, + { "dss_dsi1", "omapdss_dsi1", -1 }, +}; + +static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { + { "dss_core", "omapdss_dss", -1 }, + { "dss_dispc", "omapdss_dispc", -1 }, + { "dss_rfbi", "omapdss_rfbi", -1 }, + { "dss_venc", "omapdss_venc", -1 }, + { "dss_dsi1", "omapdss_dsi1", -1 }, + { "dss_dsi2", "omapdss_dsi2", -1 }, + { "dss_hdmi", "omapdss_hdmi", -1 }, +}; + int __init omap_display_init(struct omap_dss_board_info *board_data) { int r = 0; struct omap_hwmod *oh; struct omap_device *od; - int i; + int i, oh_count; struct omap_display_platform_data pdata; - - /* - * omap: valid DSS hwmod names - * omap2,3,4: dss_core, dss_dispc, dss_rfbi, dss_venc - * omap3,4: dss_dsi1 - * omap4: dss_dsi2, dss_hdmi - */ - char *oh_name[] = { "dss_core", "dss_dispc", "dss_rfbi", "dss_venc", - "dss_dsi1", "dss_dsi2", "dss_hdmi" }; - char *dev_name[] = { "omapdss_dss", "omapdss_dispc", "omapdss_rfbi", - "omapdss_venc", "omapdss_dsi1", "omapdss_dsi2", - "omapdss_hdmi" }; - int oh_count; + const struct omap_dss_hwmod_data *curr_dss_hwmod; memset(&pdata, 0, sizeof(pdata)); - if (cpu_is_omap24xx()) - oh_count = ARRAY_SIZE(oh_name) - 3; - /* last 3 hwmod dev in oh_name are not available for omap2 */ - else if (cpu_is_omap44xx()) - oh_count = ARRAY_SIZE(oh_name); - else - oh_count = ARRAY_SIZE(oh_name) - 2; - /* last 2 hwmod dev in oh_name are not available for omap3 */ + if (cpu_is_omap24xx()) { + curr_dss_hwmod = omap2_dss_hwmod_data; + oh_count = ARRAY_SIZE(omap2_dss_hwmod_data); + } else if (cpu_is_omap34xx()) { + curr_dss_hwmod = omap3_dss_hwmod_data; + oh_count = ARRAY_SIZE(omap3_dss_hwmod_data); + } else { + curr_dss_hwmod = omap4_dss_hwmod_data; + oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); + } /* opt_clks are always associated with dss hwmod */ oh_core = omap_hwmod_lookup("dss_core"); @@ -100,19 +121,21 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) pdata.opt_clock_available = opt_clock_available; for (i = 0; i < oh_count; i++) { - oh = omap_hwmod_lookup(oh_name[i]); + oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name); if (!oh) { - pr_err("Could not look up %s\n", oh_name[i]); + pr_err("Could not look up %s\n", + curr_dss_hwmod[i].oh_name); return -ENODEV; } - od = omap_device_build(dev_name[i], -1, oh, &pdata, + od = omap_device_build(curr_dss_hwmod[i].dev_name, + curr_dss_hwmod[i].id, oh, &pdata, sizeof(struct omap_display_platform_data), omap_dss_latency, ARRAY_SIZE(omap_dss_latency), 0); if (WARN((IS_ERR(od)), "Could not build omap_device for %s\n", - oh_name[i])) + curr_dss_hwmod[i].oh_name)) return -ENODEV; } omap_display_device.dev.platform_data = board_data; diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 877c6f5807b7..ba10c24f3d8d 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -147,25 +147,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) goto free1; } - if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) goto free1; - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, + GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); if (ret) goto free2; - gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); } if (gpmc_cfg->gpio_reset) { - ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_LOW, "SMC91X reset"); if (ret) goto free3; - gpio_direction_output(gpmc_cfg->gpio_reset, 0); gpio_set_value(gpmc_cfg->gpio_reset, 1); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 0); diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 703f150dd01d..997033129d26 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -10,6 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/kernel.h> #include <linux/platform_device.h> @@ -30,7 +31,7 @@ static struct resource gpmc_smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -41,16 +42,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; -static struct platform_device gpmc_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smsc911x_resources), - .resource = gpmc_smsc911x_resources, - .dev = { - .platform_data = &gpmc_smsc911x_config, - }, -}; - /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -58,46 +49,49 @@ static struct platform_device gpmc_smsc911x_device = { */ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) { + struct platform_device *pdev; unsigned long cs_mem_base; int ret; gpmc_cfg = board_data; if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + pr_err("Failed to request GPMC mem region\n"); return; } gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - gpmc_cfg->gpio_irq); + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { + pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); goto free1; } - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - gpmc_smsc911x_resources[1].flags |= - (gpmc_cfg->flags & IRQF_TRIGGER_MASK); if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_HIGH, "smsc911x reset"); if (ret) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n", - gpmc_cfg->gpio_reset); + pr_err("Failed to request reset GPIO%d\n", + gpmc_cfg->gpio_reset); goto free2; } - gpio_direction_output(gpmc_cfg->gpio_reset, 1); gpio_set_value(gpmc_cfg->gpio_reset, 0); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (platform_device_register(&gpmc_smsc911x_device) < 0) { - printk(KERN_ERR "Unable to register smsc911x device\n"); + if (gpmc_cfg->flags) + gpmc_smsc911x_config.flags = gpmc_cfg->flags; + + pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, + gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), + &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); + if (!pdev) { + pr_err("Unable to register platform device\n"); gpio_free(gpmc_cfg->gpio_reset); goto free2; } @@ -109,5 +103,5 @@ free2: free1: gpmc_cs_free(gpmc_cfg->cs); - printk(KERN_ERR "Could not initialize smsc911x\n"); + pr_err("Could not initialize smsc911x device\n"); } diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index d20bd9c1a106..775fdc3b000b 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -1,7 +1,7 @@ /* * Defines for zoom boards */ -#include <plat/display.h> +#include <video/omapdss.h> #define ZOOM_NAND_CS 0 diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 82632c24076f..7b9f1909ddb2 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -63,10 +63,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) char *source_name; /* Get the Type of interrupt */ - if (irq == l3->app_irq) - inttype = L3_APPLICATION_ERROR; - else - inttype = L3_DEBUG_ERROR; + inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; for (i = 0; i < L3_MODULES; i++) { /* @@ -84,10 +81,10 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) err_src = j; /* Read the stderrlog_main_source from clk domain */ - std_err_main_addr = base + (*(l3_targ[i] + err_src)); - std_err_main = readl(std_err_main_addr); + std_err_main_addr = base + *(l3_targ[i] + err_src); + std_err_main = readl(std_err_main_addr); - switch ((std_err_main & CUSTOM_ERROR)) { + switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: source_name = l3_targ_stderrlog_main_name[i][err_src]; @@ -132,49 +129,49 @@ static int __init omap4_l3_probe(struct platform_device *pdev) l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) - ret = -ENOMEM; + return -ENOMEM; platform_set_drvdata(pdev, l3); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "couldn't find resource 0\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->l3_base[0] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[0])) { + if (!l3->l3_base[0]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { dev_err(&pdev->dev, "couldn't find resource 1\n"); ret = -ENODEV; - goto err3; + goto err1; } l3->l3_base[1] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[1])) { + if (!l3->l3_base[1]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err4; + goto err1; } res = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (!res) { dev_err(&pdev->dev, "couldn't find resource 2\n"); ret = -ENODEV; - goto err5; + goto err2; } l3->l3_base[2] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[2])) { + if (!l3->l3_base[2]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err6; + goto err2; } /* @@ -187,7 +184,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_DBG); - goto err7; + goto err3; } l3->debug_irq = irq; @@ -198,24 +195,22 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_APP); - goto err8; + goto err4; } l3->app_irq = irq; - goto err0; -err8: -err7: - iounmap(l3->l3_base[2]); -err6: -err5: - iounmap(l3->l3_base[1]); + return 0; + err4: + free_irq(l3->debug_irq, l3); err3: - iounmap(l3->l3_base[0]); + iounmap(l3->l3_base[2]); err2: + iounmap(l3->l3_base[1]); err1: - kfree(l3); + iounmap(l3->l3_base[0]); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 4321e7938929..873c0e33b512 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,7 +155,7 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s Error seen by %s %s at address %x\n", + WARN(true, "%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", @@ -167,21 +167,15 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) { struct omap3_l3 *l3 = _l3; - u64 status, clear; u64 error; u64 error_addr; u64 err_source = 0; void __iomem *base; int int_type; - irqreturn_t ret = IRQ_NONE; - if (irq == l3->app_irq) - int_type = L3_APPLICATION_ERROR; - else - int_type = L3_DEBUG_ERROR; - + int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; if (!int_type) { status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0); /* @@ -202,7 +196,6 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); - if (error) { error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); @@ -210,9 +203,8 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) } /* Clear the status register */ - clear = ((L3_AGENT_STATUS_CLEAR_IA << int_type) | - (L3_AGENT_STATUS_CLEAR_TA)); - + clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) | + L3_AGENT_STATUS_CLEAR_TA; omap3_l3_writell(base, L3_AGENT_STATUS, clear); /* clear the error log register */ @@ -228,10 +220,8 @@ static int __init omap3_l3_probe(struct platform_device *pdev) int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); - if (!l3) { - ret = -ENOMEM; - goto err0; - } + if (!l3) + return -ENOMEM; platform_set_drvdata(pdev, l3); @@ -239,13 +229,13 @@ static int __init omap3_l3_probe(struct platform_device *pdev) if (!res) { dev_err(&pdev->dev, "couldn't find resource\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->rt = ioremap(res->start, resource_size(res)); - if (!(l3->rt)) { + if (!l3->rt) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } l3->debug_irq = platform_get_irq(pdev, 0); @@ -254,28 +244,26 @@ static int __init omap3_l3_probe(struct platform_device *pdev) "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); - goto err3; + goto err1; } l3->app_irq = platform_get_irq(pdev, 1); ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); - if (ret) { dev_err(&pdev->dev, "couldn't request app irq\n"); - goto err4; + goto err2; } - goto err0; + return 0; -err4: -err3: - iounmap(l3->rt); err2: + free_irq(l3->debug_irq, l3); err1: - kfree(l3); + iounmap(l3->rt); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 05f6abc96b0d..f47813edd951 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -50,13 +50,16 @@ int omap4430_phy_init(struct device *dev) { ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K); if (!ctrl_base) { - dev_err(dev, "control module ioremap failed\n"); + pr_err("control module ioremap failed\n"); return -ENOMEM; } /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); + if (!dev) + return 0; + + phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); if (IS_ERR(phyclk)) { dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n"); iounmap(ctrl_base); @@ -228,7 +231,7 @@ void am35x_musb_clear_irq(void) regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); } -void am35x_musb_set_mode(u8 musb_mode) +void am35x_set_mode(u8 musb_mode) { u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 797bfd12b643..45bcfce77352 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -36,11 +36,16 @@ static inline int omap4_opp_init(void) } #endif +/* + * cpuidle mach specific parameters + * + * The board code can override the default C-states definition using + * omap3_pm_init_cpuidle + */ struct cpuidle_params { - u8 valid; - u32 sleep_latency; - u32 wake_latency; - u32 threshold; + u32 exit_latency; /* exit_latency = sleep + wake-up latencies */ + u32 target_residency; + u8 valid; /* validates the C-state */ }; #if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) @@ -73,10 +78,6 @@ extern u32 sleep_while_idle; #define sleep_while_idle 0 #endif -#if defined(CONFIG_CPU_IDLE) -extern void omap3_cpuidle_update_states(u32, u32); -#endif - #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); extern int pm_dbg_regset_save(int reg_set); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0c5e3a46a3ad..c155c9d1c82c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -779,18 +779,6 @@ void omap3_pm_off_mode_enable(int enable) else state = PWRDM_POWER_RET; -#ifdef CONFIG_CPU_IDLE - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions, restrict - * instead to RET - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) - omap3_cpuidle_update_states(state, PWRDM_POWER_RET); - else - omap3_cpuidle_update_states(state, state); -#endif - list_for_each_entry(pwrst, &pwrst_list, node) { if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) && pwrst->pwrdm == core_pwrdm && @@ -895,8 +883,6 @@ static int __init omap3_pm_init(void) pm_errata_configure(); - printk(KERN_ERR "Power Management for TI OMAP3.\n"); - /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 76cfff2db514..59a870be8390 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -105,13 +105,11 @@ static int __init omap4_pm_init(void) pr_err("Power Management for TI OMAP4.\n"); -#ifdef CONFIG_PM ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains\n"); goto err2; } -#endif #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 13e24f913dd4..fb7dc52394a8 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -847,6 +847,14 @@ static int __init omap_sr_probe(struct platform_device *pdev) goto err_free_devinfo; } + mem = request_mem_region(mem->start, resource_size(mem), + dev_name(&pdev->dev)); + if (!mem) { + dev_err(&pdev->dev, "%s: no mem region\n", __func__); + ret = -EBUSY; + goto err_free_devinfo; + } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); @@ -883,7 +891,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - goto err_release_region; + return ret; } } @@ -896,7 +904,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); if (!vdd_dbg_dir) { ret = -EINVAL; - goto err_release_region; + goto err_iounmap; } sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); @@ -904,7 +912,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); - goto err_release_region; + goto err_iounmap; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, @@ -921,7 +929,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); ret = PTR_ERR(nvalue_dir); - goto err_release_region; + goto err_debugfs; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -931,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) "entries for n-values\n", __func__, sr_info->voltdm->name); ret = -ENODATA; - goto err_release_region; + goto err_debugfs; } for (i = 0; i < sr_info->nvalue_count; i++) { @@ -945,6 +953,11 @@ static int __init omap_sr_probe(struct platform_device *pdev) return ret; +err_debugfs: + debugfs_remove_recursive(sr_info->dbg_dir); +err_iounmap: + list_del(&sr_info->node); + iounmap(sr_info->base); err_release_region: release_mem_region(mem->start, resource_size(mem)); err_free_devinfo: diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 35559f77e2de..c7ed540d868d 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -108,7 +108,13 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) } } -void __init usb_musb_init(struct omap_musb_board_data *board_data) +static struct omap_musb_board_data musb_default_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; struct omap_device *od; @@ -116,11 +122,12 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) struct device *dev; int bus_id = -1; const char *oh_name, *name; + struct omap_musb_board_data *board_data; - if (cpu_is_omap3517() || cpu_is_omap3505()) { - } else if (cpu_is_omap44xx()) { - usb_musb_mux_init(board_data); - } + if (musb_board_data) + board_data = musb_board_data; + else + board_data = &musb_default_board_data; /* * REVISIT: This line can be removed once all the platforms using @@ -164,10 +171,15 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) dev->dma_mask = &musb_dmamask; dev->coherent_dma_mask = musb_dmamask; put_device(dev); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); } #else void __init usb_musb_init(struct omap_musb_board_data *board_data) { + if (cpu_is_omap44xx()) + omap4430_phy_init(NULL); } #endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8a3c05f3c1d6..8dd26b765b7d 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -293,12 +293,11 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, ); /* IRQ */ - status = gpio_request(irq, "TUSB6010 irq"); + status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); if (status < 0) { printk(error, 3, status); return status; } - gpio_direction_input(irq); tusb_resources[2].start = irq + IH_GPIO_BASE; /* set up memory timings ... can speed them up later */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 0c1552d9d995..9ef3789ded4b 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -148,7 +148,6 @@ static int vp_volt_debug_get(void *data, u64 *val) } vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - pr_notice("curr_vsel = %x\n", vsel); if (!vdd->pmic_info->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index e2507f66f9d5..612b27000c3e 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -30,6 +30,11 @@ obj-$(CONFIG_ARCH_SH7377) += entry-intc.o obj-$(CONFIG_ARCH_SH7372) += entry-intc.o obj-$(CONFIG_ARCH_SH73A0) += entry-gic.o +# PM objects +obj-$(CONFIG_SUSPEND) += suspend.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_SH7372) += pm-sh7372.o sleep-sh7372.o + # Board objects obj-$(CONFIG_MACH_G3EVM) += board-g3evm.o obj-$(CONFIG_MACH_G4EVM) += board-g4evm.o diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 3e6f0aab460b..c95258c274c1 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -34,6 +34,8 @@ #include <linux/input/sh_keysc.h> #include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> +#include <linux/mmc/sh_mobile_sdhi.h> +#include <linux/mfd/tmio.h> #include <linux/sh_clk.h> #include <video/sh_mobile_lcdc.h> #include <video/sh_mipi_dsi.h> @@ -156,10 +158,19 @@ static struct resource sh_mmcif_resources[] = { }, }; +static struct sh_mmcif_dma sh_mmcif_dma = { + .chan_priv_rx = { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + }, + .chan_priv_tx = { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + }, +}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, + .dma = &sh_mmcif_dma, }; static struct platform_device mmc_device = { @@ -296,11 +307,13 @@ static struct platform_device lcdc0_device = { /* MIPI-DSI */ static struct resource mipidsi0_resources[] = { [0] = { + .name = "DSI0", .start = 0xfeab0000, .end = 0xfeab3fff, .flags = IORESOURCE_MEM, }, [1] = { + .name = "DSI0", .start = 0xfeab4000, .end = 0xfeab7fff, .flags = IORESOURCE_MEM, @@ -325,6 +338,89 @@ static struct platform_device mipidsi0_device = { }, }; +static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_caps = MMC_CAP_SD_HIGHSPEED, + .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xee100000, + .end = 0xee1000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(83), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(84), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = gic_spi(85), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .id = 0, + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) +{ + gpio_set_value(GPIO_PORT114, state); +} + +static struct sh_mobile_sdhi_info sh_sdhi1_platdata = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_caps = MMC_CAP_NONREMOVABLE, + .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .set_pwr = ag5evm_sdhi1_set_pwr, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xee120000, + .end = 0xee1200ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = gic_spi(87), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = gic_spi(88), + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = gic_spi(89), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .id = 1, + .dev = { + .platform_data = &sh_sdhi1_platdata, + }, + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, +}; + static struct platform_device *ag5evm_devices[] __initdata = { ð_device, &keysc_device, @@ -333,6 +429,8 @@ static struct platform_device *ag5evm_devices[] __initdata = { &irda_device, &lcdc0_device, &mipidsi0_device, + &sdhi0_device, + &sdhi1_device, }; static struct map_desc ag5evm_io_desc[] __initdata = { @@ -454,6 +552,26 @@ static void __init ag5evm_init(void) /* MIPI-DSI clock setup */ __raw_writel(0x2a809010, DSI0PHYCR); + /* enable SDHI0 on CN15 [SD I/F] */ + gpio_request(GPIO_FN_SDHICD0, NULL); + gpio_request(GPIO_FN_SDHIWP0, NULL); + gpio_request(GPIO_FN_SDHICMD0, NULL); + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHID0_3, NULL); + gpio_request(GPIO_FN_SDHID0_2, NULL); + gpio_request(GPIO_FN_SDHID0_1, NULL); + gpio_request(GPIO_FN_SDHID0_0, NULL); + + /* enable SDHI1 on CN4 [WLAN I/F] */ + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHICMD1_PU, NULL); + gpio_request(GPIO_FN_SDHID1_3_PU, NULL); + gpio_request(GPIO_FN_SDHID1_2_PU, NULL); + gpio_request(GPIO_FN_SDHID1_1_PU, NULL); + gpio_request(GPIO_FN_SDHID1_0_PU, NULL); + gpio_request(GPIO_PORT114, "sdhi1_power"); + gpio_direction_output(GPIO_PORT114, 0); + #ifdef CONFIG_CACHE_L2X0 /* Shared attribute override enable, 64K*8way */ l2x0_init(__io(0xf0100000), 0x00460000, 0xc2000fff); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1e35fa976d64..08acb6ec8139 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -316,8 +316,16 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0e00) /* SDHI0 */, - .flags = IORESOURCE_IRQ, + .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, + .flags = IORESOURCE_IRQ, }, }; @@ -349,8 +357,16 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0e80), - .flags = IORESOURCE_IRQ, + .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ + .flags = IORESOURCE_IRQ, }, }; @@ -980,11 +996,6 @@ static void __init hdmi_init_pm_clock(void) goto out; } - ret = clk_enable(&sh7372_pllc2_clk); - if (ret < 0) { - pr_err("Cannot enable pllc2 clock\n"); - goto out; - } pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -1343,6 +1354,7 @@ static void __init ap4evb_init(void) hdmi_init_pm_clock(); fsi_init_pm_clock(); + sh7372_pm_init(); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index c87a7b7c5832..8e3c5559f27f 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -205,7 +205,7 @@ static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", .start = 0xe6d50000, - .end = 0xe6d50nff, + .end = 0xe6d500ff, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7da2ca24229d..448ddbe43335 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,6 +43,7 @@ #include <linux/sh_intc.h> #include <linux/tca6416_keypad.h> #include <linux/usb/r8a66597.h> +#include <linux/usb/renesas_usbhs.h> #include <video/sh_mobile_hdmi.h> #include <video/sh_mobile_lcdc.h> @@ -143,7 +144,30 @@ * open | external VBUS | Function * * *1 - * CN31 is used as Host in Linux. + * CN31 is used as + * CONFIG_USB_R8A66597_HCD Host + * CONFIG_USB_RENESAS_USBHS Function + * + * CAUTION + * + * renesas_usbhs driver can use external interrupt mode + * (which come from USB-PHY) or autonomy mode (it use own interrupt) + * for detecting connection/disconnection when Function. + * USB will be power OFF while it has been disconnecting + * if external interrupt mode, and it is always power ON if autonomy mode, + * + * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", + * because Touchscreen is using IRQ7-PORT40. + * It is impossible to use IRQ7 demux on this board. + * + * We can use external interrupt mode USB-Function on "USB1". + * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. + * But don't select both drivers in same time. + * These uses same IRQ number for request_irq(), and aren't supporting + * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE. + * + * Actually these are old/new version of USB driver. + * This mean its register will be broken if it supports SHARD IRQ, */ /* @@ -185,6 +209,7 @@ * FIXME !! * * gpio_no_direction + * gpio_pull_down * are quick_hack. * * current gpio frame work doesn't have @@ -196,6 +221,16 @@ static void __init gpio_no_direction(u32 addr) __raw_writeb(0x00, addr); } +static void __init gpio_pull_down(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xA0; + + __raw_writeb(data, addr); +} + /* MTD */ static struct mtd_partition nor_flash_partitions[] = { { @@ -458,12 +493,6 @@ static void __init hdmi_init_pm_clock(void) goto out; } - ret = clk_enable(&sh7372_pllc2_clk); - if (ret < 0) { - pr_err("Cannot enable pllc2 clock\n"); - goto out; - } - pr_debug("PLLC2 set frequency %lu\n", rate); ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); @@ -515,6 +544,157 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; +/* USB1 (Function) */ +#define USB_PHY_MODE (1 << 4) +#define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) +#define USB_PHY_ON (1 << 1) +#define USB_PHY_OFF (1 << 0) +#define USB_PHY_INT_CLR (USB_PHY_ON | USB_PHY_OFF) + +struct usbhs_private { + unsigned int irq; + unsigned int usbphyaddr; + unsigned int usbcrcaddr; + struct renesas_usbhs_platform_info info; +}; + +#define usbhs_get_priv(pdev) \ + container_of(renesas_usbhs_get_info(pdev), \ + struct usbhs_private, info) + +#define usbhs_is_connected(priv) \ + (!((1 << 7) & __raw_readw(priv->usbcrcaddr))) + +static int usbhs1_get_id(struct platform_device *pdev) +{ + return USBHS_GADGET; +} + +static int usbhs1_get_vbus(struct platform_device *pdev) +{ + return usbhs_is_connected(usbhs_get_priv(pdev)); +} + +static irqreturn_t usbhs1_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + struct usbhs_private *priv = usbhs_get_priv(pdev); + + dev_dbg(&pdev->dev, "%s\n", __func__); + + renesas_usbhs_call_notify_hotplug(pdev); + + /* clear status */ + __raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR, + priv->usbphyaddr); + + return IRQ_HANDLED; +} + +static int usbhs1_hardware_init(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + int ret; + + irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH); + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); + + ret = request_irq(priv->irq, usbhs1_interrupt, 0, + dev_name(&pdev->dev), pdev); + if (ret) { + dev_err(&pdev->dev, "request_irq err\n"); + return ret; + } + + /* enable USB phy interrupt */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr); + + return 0; +} + +static void usbhs1_hardware_exit(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* clear interrupt status */ + __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr); + + free_irq(priv->irq, pdev); +} + +static void usbhs1_phy_reset(struct platform_device *pdev) +{ + struct usbhs_private *priv = usbhs_get_priv(pdev); + + /* init phy */ + __raw_writew(0x8a0a, priv->usbcrcaddr); +} + +static u32 usbhs1_pipe_cfg[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, +}; + +static struct usbhs_private usbhs1_private = { + .irq = evt2irq(0x0300), /* IRQ8 */ + .usbphyaddr = 0xE60581E2, /* USBPHY1INTAP */ + .usbcrcaddr = 0xE6058130, /* USBCR4 */ + .info = { + .platform_callback = { + .hardware_init = usbhs1_hardware_init, + .hardware_exit = usbhs1_hardware_exit, + .phy_reset = usbhs1_phy_reset, + .get_id = usbhs1_get_id, + .get_vbus = usbhs1_get_vbus, + }, + .driver_param = { + .buswait_bwait = 4, + .pipe_type = usbhs1_pipe_cfg, + .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + }, + }, +}; + +static struct resource usbhs1_resources[] = { + [0] = { + .name = "USBHS", + .start = 0xE68B0000, + .end = 0xE68B00E6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbhs1_device = { + .name = "renesas_usbhs", + .id = 1, + .dev = { + .platform_data = &usbhs1_private.info, + }, + .num_resources = ARRAY_SIZE(usbhs1_resources), + .resource = usbhs1_resources, +}; + + /* LED */ static struct gpio_led mackerel_leds[] = { { @@ -690,7 +870,15 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0e00) /* SDHI0 */, + .start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */, .flags = IORESOURCE_IRQ, }, }; @@ -705,7 +893,7 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SDHI1 */ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, @@ -725,7 +913,15 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0e80), + .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */ + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */ .flags = IORESOURCE_IRQ, }, }; @@ -768,7 +964,15 @@ static struct resource sdhi2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x1200), + .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */ + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */ + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */ .flags = IORESOURCE_IRQ, }, }; @@ -803,6 +1007,15 @@ static struct resource sh_mmcif_resources[] = { }, }; +static struct sh_mmcif_dma sh_mmcif_dma = { + .chan_priv_rx = { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + }, + .chan_priv_tx = { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + }, +}; + static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -810,6 +1023,7 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, + .dma = &sh_mmcif_dma, }; static struct platform_device sh_mmcif_device = { @@ -858,37 +1072,23 @@ static struct soc_camera_link camera_link = { .priv = &camera_info, }; -static void dummy_release(struct device *dev) +static struct platform_device *camera_device; + +static void mackerel_camera_release(struct device *dev) { + soc_camera_platform_release(&camera_device); } -static struct platform_device camera_device = { - .name = "soc_camera_platform", - .dev = { - .platform_data = &camera_info, - .release = dummy_release, - }, -}; - static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev) { - if (icl != &camera_link) - return -ENODEV; - - camera_info.dev = dev; - - return platform_device_register(&camera_device); + return soc_camera_platform_add(icl, dev, &camera_device, &camera_link, + mackerel_camera_release, 0); } static void mackerel_camera_del(struct soc_camera_link *icl) { - if (icl != &camera_link) - return; - - platform_device_unregister(&camera_device); - memset(&camera_device.dev.kobj, 0, - sizeof(camera_device.dev.kobj)); + soc_camera_platform_del(icl, camera_device, &camera_link); } static struct sh_mobile_ceu_info sh_mobile_ceu_info = { @@ -935,12 +1135,13 @@ static struct platform_device *mackerel_devices[] __initdata = { &smc911x_device, &lcdc_device, &usb1_host_device, + &usbhs1_device, &leds_device, &fsi_device, &fsi_ak4643_device, &fsi_hdmi_device, &sdhi0_device, -#if !defined(CONFIG_MMC_SH_MMCIF) +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, #endif &sdhi2_device, @@ -1030,6 +1231,7 @@ static void __init mackerel_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define GPIO_PORT168CR 0xE60520A8 #define SRCR4 0xe61580bc #define USCCR1 0xE6058144 static void __init mackerel_init(void) @@ -1088,6 +1290,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_OVCN_1_114, NULL); gpio_request(GPIO_FN_EXTLP_1, NULL); gpio_request(GPIO_FN_OVCN2_1, NULL); + gpio_pull_down(GPIO_PORT168CR); /* setup USB phy */ __raw_writew(0x8a0a, 0xE6058130); /* USBCR4 */ @@ -1140,7 +1343,7 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); -#if !defined(CONFIG_MMC_SH_MMCIF) +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); gpio_request(GPIO_FN_SDHICLK1, NULL); @@ -1216,6 +1419,7 @@ static void __init mackerel_init(void) platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); hdmi_init_pm_clock(); + sh7372_pm_init(); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index e9731b5a73ed..d17eb66f4ac2 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -44,6 +44,11 @@ #define DSI1PCKCR 0xe6150098 #define PLLC01CR 0xe6150028 #define PLLC2CR 0xe615002c +#define RMSTPCR0 0xe6150110 +#define RMSTPCR1 0xe6150114 +#define RMSTPCR2 0xe6150118 +#define RMSTPCR3 0xe615011c +#define RMSTPCR4 0xe6150120 #define SMSTPCR0 0xe6150130 #define SMSTPCR1 0xe6150134 #define SMSTPCR2 0xe6150138 @@ -421,9 +426,6 @@ static unsigned long fsidiv_recalc(struct clk *clk) value = __raw_readl(clk->mapping->base); - if ((value & 0x3) != 0x3) - return 0; - value >>= 16; if (value < 2) return 0; @@ -504,7 +506,7 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, - MSTP118, MSTP117, MSTP116, + MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, @@ -527,6 +529,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP118] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 18, 0), /* DSITX */ [MSTP117] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */ [MSTP116] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */ + [MSTP113] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR1, 13, 0), /* MERAM */ [MSTP106] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 6, 0), /* JPU */ [MSTP101] = MSTP(&div4_clks[DIV4_M1], SMSTPCR1, 1, 0), /* VPU */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ @@ -617,6 +620,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mipi-dsi.0", &mstp_clks[MSTP118]), /* DSITX0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.1", &mstp_clks[MSTP117]), /* LCDC1 */ CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* IIC0 */ + CLKDEV_DEV_ID("sh_mobile_meram.0", &mstp_clks[MSTP113]), /* MERAM */ CLKDEV_DEV_ID("uio_pdrv_genirq.5", &mstp_clks[MSTP106]), /* JPU */ CLKDEV_DEV_ID("uio_pdrv_genirq.0", &mstp_clks[MSTP101]), /* VPU */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ @@ -634,6 +638,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("r8a66597_udc.0", &mstp_clks[MSTP322]), /* USB0 */ + CLKDEV_DEV_ID("renesas_usbhs.0", &mstp_clks[MSTP322]), /* USB0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMC */ @@ -644,6 +649,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), @@ -655,6 +661,13 @@ void __init sh7372_clock_init(void) { int k, ret = 0; + /* make sure MSTP bits on the RT/SH4AL-DSP side are off */ + __raw_writel(0xe4ef8087, RMSTPCR0); + __raw_writel(0xffffffff, RMSTPCR1); + __raw_writel(0x37c7f7ff, RMSTPCR2); + __raw_writel(0xffffffff, RMSTPCR3); + __raw_writel(0xffe0fffd, RMSTPCR4); + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) ret = clk_register(main_clks[k]); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 7e58904c1c8c..bcacb1e8cf85 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -266,7 +266,8 @@ enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP312, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, + MSTP314, MSTP313, MSTP312, MSTP311, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -295,7 +296,11 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ + [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */ + [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ + [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ + [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ @@ -313,6 +318,9 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("vck1_clk", &div6_clks[DIV6_VCK1]), CLKDEV_CON_ID("vck2_clk", &div6_clks[DIV6_VCK2]), CLKDEV_CON_ID("vck3_clk", &div6_clks[DIV6_VCK3]), + CLKDEV_CON_ID("sdhi0_clk", &div6_clks[DIV6_SDHI0]), + CLKDEV_CON_ID("sdhi1_clk", &div6_clks[DIV6_SDHI1]), + CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), @@ -341,7 +349,11 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */ + CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ + CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ @@ -351,6 +363,11 @@ void __init sh73a0_clock_init(void) { int k, ret = 0; + /* Set SDHI clocks to a known state */ + __raw_writel(0x108, SD0CKCR); + __raw_writel(0x108, SD1CKCR); + __raw_writel(0x108, SD2CKCR); + /* detect main clock parent */ switch ((__raw_readl(CKSCR) >> 24) & 0x03) { case 0: diff --git a/arch/arm/mach-shmobile/cpuidle.c b/arch/arm/mach-shmobile/cpuidle.c new file mode 100644 index 000000000000..2e44f11f592e --- /dev/null +++ b/arch/arm/mach-shmobile/cpuidle.c @@ -0,0 +1,92 @@ +/* + * CPUIdle support code for SH-Mobile ARM + * + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pm.h> +#include <linux/cpuidle.h> +#include <linux/suspend.h> +#include <linux/module.h> +#include <linux/err.h> +#include <asm/system.h> +#include <asm/io.h> + +static void shmobile_enter_wfi(void) +{ + cpu_do_idle(); +} + +void (*shmobile_cpuidle_modes[CPUIDLE_STATE_MAX])(void) = { + shmobile_enter_wfi, /* regular sleep mode */ +}; + +static int shmobile_cpuidle_enter(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + ktime_t before, after; + int requested_state = state - &dev->states[0]; + + dev->last_state = &dev->states[requested_state]; + before = ktime_get(); + + local_irq_disable(); + local_fiq_disable(); + + shmobile_cpuidle_modes[requested_state](); + + local_irq_enable(); + local_fiq_enable(); + + after = ktime_get(); + return ktime_to_ns(ktime_sub(after, before)) >> 10; +} + +static struct cpuidle_device shmobile_cpuidle_dev; +static struct cpuidle_driver shmobile_cpuidle_driver = { + .name = "shmobile_cpuidle", + .owner = THIS_MODULE, +}; + +void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev); + +static int shmobile_cpuidle_init(void) +{ + struct cpuidle_device *dev = &shmobile_cpuidle_dev; + struct cpuidle_state *state; + int i; + + cpuidle_register_driver(&shmobile_cpuidle_driver); + + for (i = 0; i < CPUIDLE_STATE_MAX; i++) { + dev->states[i].name[0] = '\0'; + dev->states[i].desc[0] = '\0'; + dev->states[i].enter = shmobile_cpuidle_enter; + } + + i = CPUIDLE_DRIVER_STATE_START; + + state = &dev->states[i++]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C1"); + strncpy(state->desc, "WFI", CPUIDLE_DESC_LEN); + state->exit_latency = 1; + state->target_residency = 1 * 2; + state->power_usage = 3; + state->flags = 0; + state->flags |= CPUIDLE_FLAG_TIME_VALID; + + dev->safe_state = state; + dev->state_count = i; + + if (shmobile_cpuidle_setup) + shmobile_cpuidle_setup(dev); + + cpuidle_register_device(dev); + + return 0; +} +late_initcall(shmobile_cpuidle_init); diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index d4cec6b4c7d9..26079d933d91 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,4 +24,4 @@ .align 12 ENTRY(shmobile_secondary_vector) ldr pc, 1f -1: .long secondary_startup - PAGE_OFFSET + PHYS_OFFSET +1: .long secondary_startup - PAGE_OFFSET + PLAT_PHYS_OFFSET diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index 013ac0ee8256..06aecb31d9c7 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -8,6 +8,10 @@ struct clk; extern int clk_init(void); extern void shmobile_handle_irq_intc(struct pt_regs *); extern void shmobile_handle_irq_gic(struct pt_regs *); +extern struct platform_suspend_ops shmobile_suspend_ops; +struct cpuidle_device; +extern void (*shmobile_cpuidle_modes[])(void); +extern void (*shmobile_cpuidle_setup)(struct cpuidle_device *dev); extern void sh7367_init_irq(void); extern void sh7367_add_early_devices(void); @@ -30,6 +34,9 @@ extern void sh7372_add_early_devices(void); extern void sh7372_add_standard_devices(void); extern void sh7372_clock_init(void); extern void sh7372_pinmux_init(void); +extern void sh7372_pm_init(void); +extern void sh7372_cpu_suspend(void); +extern void sh7372_cpu_resume(void); extern struct clk sh7372_extal1_clk; extern struct clk sh7372_extal2_clk; diff --git a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt index 3029aba38688..9f134dfeffdc 100644 --- a/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt +++ b/arch/arm/mach-shmobile/include/mach/head-ap4evb.txt @@ -87,8 +87,7 @@ WAIT 1, 0xFE40009C ED 0xFE400354, 0x01AD8002 LIST "SCIF0 - Serial port for earlyprintk" -EB 0xE6053098, 0x11 EB 0xE6053098, 0xe1 EW 0xE6C40000, 0x0000 EB 0xE6C40004, 0x19 -EW 0xE6C40008, 0x3000 +EW 0xE6C40008, 0x0030 diff --git a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt index 3029aba38688..9f134dfeffdc 100644 --- a/arch/arm/mach-shmobile/include/mach/head-mackerel.txt +++ b/arch/arm/mach-shmobile/include/mach/head-mackerel.txt @@ -87,8 +87,7 @@ WAIT 1, 0xFE40009C ED 0xFE400354, 0x01AD8002 LIST "SCIF0 - Serial port for earlyprintk" -EB 0xE6053098, 0x11 EB 0xE6053098, 0xe1 EW 0xE6C40000, 0x0000 EB 0xE6C40004, 0x19 -EW 0xE6C40008, 0x3000 +EW 0xE6C40008, 0x0030 diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 5736efcca60c..df20d7670172 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -435,6 +435,7 @@ enum { /* DMA slave IDs */ enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SCIF0_TX, SHDMA_SLAVE_SCIF0_RX, SHDMA_SLAVE_SCIF1_TX, diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index ceb2cdc92bf9..216c3d695ef1 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -463,5 +463,35 @@ enum { GPIO_FN_FSIAIBT_PU, GPIO_FN_FSIAISLD_PU, }; +/* DMA slave IDs */ +enum { + SHDMA_SLAVE_INVALID, + SHDMA_SLAVE_SCIF0_TX, + SHDMA_SLAVE_SCIF0_RX, + SHDMA_SLAVE_SCIF1_TX, + SHDMA_SLAVE_SCIF1_RX, + SHDMA_SLAVE_SCIF2_TX, + SHDMA_SLAVE_SCIF2_RX, + SHDMA_SLAVE_SCIF3_TX, + SHDMA_SLAVE_SCIF3_RX, + SHDMA_SLAVE_SCIF4_TX, + SHDMA_SLAVE_SCIF4_RX, + SHDMA_SLAVE_SCIF5_TX, + SHDMA_SLAVE_SCIF5_RX, + SHDMA_SLAVE_SCIF6_TX, + SHDMA_SLAVE_SCIF6_RX, + SHDMA_SLAVE_SCIF7_TX, + SHDMA_SLAVE_SCIF7_RX, + SHDMA_SLAVE_SCIF8_TX, + SHDMA_SLAVE_SCIF8_RX, + SHDMA_SLAVE_SDHI0_TX, + SHDMA_SLAVE_SDHI0_RX, + SHDMA_SLAVE_SDHI1_TX, + SHDMA_SLAVE_SDHI1_RX, + SHDMA_SLAVE_SDHI2_TX, + SHDMA_SLAVE_SDHI2_RX, + SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_MMCIF_RX, +}; #endif /* __ASM_SH73A0_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 7a4960f9c1e3..3b28743c77eb 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -27,8 +27,6 @@ enum { UNUSED_INTCA = 0, - ENABLED, - DISABLED, /* interrupt sources INTCA */ IRQ0A, IRQ1A, IRQ2A, IRQ3A, IRQ4A, IRQ5A, IRQ6A, IRQ7A, @@ -49,14 +47,14 @@ enum { MSIOF2, MSIOF1, SCIFA4, SCIFA5, SCIFB, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, - SDHI0, - SDHI1, + SDHI0_SDHI0I0, SDHI0_SDHI0I1, SDHI0_SDHI0I2, SDHI0_SDHI0I3, + SDHI1_SDHI1I0, SDHI1_SDHI1I1, SDHI1_SDHI1I2, IRREM, IRDA, TPU0, TTI20, DDM, - SDHI2, + SDHI2_SDHI2I0, SDHI2_SDHI2I1, SDHI2_SDHI2I2, SDHI2_SDHI2I3, RWDT0, DMAC1_1_DEI0, DMAC1_1_DEI1, DMAC1_1_DEI2, DMAC1_1_DEI3, DMAC1_2_DEI4, DMAC1_2_DEI5, DMAC1_2_DADERR, @@ -84,7 +82,7 @@ enum { /* interrupt groups INTCA */ DMAC1_1, DMAC1_2, DMAC2_1, DMAC2_2, DMAC3_1, DMAC3_2, SHWYSTAT, - AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1 + AP_ARM1, AP_ARM2, SPU2, FLCTL, IIC1, SDHI0, SDHI1, SDHI2 }; static struct intc_vect intca_vectors[] __initdata = { @@ -125,17 +123,17 @@ static struct intc_vect intca_vectors[] __initdata = { INTC_VECT(SCIFB, 0x0d60), INTC_VECT(FLCTL_FLSTEI, 0x0d80), INTC_VECT(FLCTL_FLTENDI, 0x0da0), INTC_VECT(FLCTL_FLTREQ0I, 0x0dc0), INTC_VECT(FLCTL_FLTREQ1I, 0x0de0), - INTC_VECT(SDHI0, 0x0e00), INTC_VECT(SDHI0, 0x0e20), - INTC_VECT(SDHI0, 0x0e40), INTC_VECT(SDHI0, 0x0e60), - INTC_VECT(SDHI1, 0x0e80), INTC_VECT(SDHI1, 0x0ea0), - INTC_VECT(SDHI1, 0x0ec0), + INTC_VECT(SDHI0_SDHI0I0, 0x0e00), INTC_VECT(SDHI0_SDHI0I1, 0x0e20), + INTC_VECT(SDHI0_SDHI0I2, 0x0e40), INTC_VECT(SDHI0_SDHI0I3, 0x0e60), + INTC_VECT(SDHI1_SDHI1I0, 0x0e80), INTC_VECT(SDHI1_SDHI1I1, 0x0ea0), + INTC_VECT(SDHI1_SDHI1I2, 0x0ec0), INTC_VECT(IRREM, 0x0f60), INTC_VECT(IRDA, 0x0480), INTC_VECT(TPU0, 0x04a0), INTC_VECT(TTI20, 0x1100), INTC_VECT(DDM, 0x1140), - INTC_VECT(SDHI2, 0x1200), INTC_VECT(SDHI2, 0x1220), - INTC_VECT(SDHI2, 0x1240), INTC_VECT(SDHI2, 0x1260), + INTC_VECT(SDHI2_SDHI2I0, 0x1200), INTC_VECT(SDHI2_SDHI2I1, 0x1220), + INTC_VECT(SDHI2_SDHI2I2, 0x1240), INTC_VECT(SDHI2_SDHI2I3, 0x1260), INTC_VECT(RWDT0, 0x1280), INTC_VECT(DMAC1_1_DEI0, 0x2000), INTC_VECT(DMAC1_1_DEI1, 0x2020), INTC_VECT(DMAC1_1_DEI2, 0x2040), INTC_VECT(DMAC1_1_DEI3, 0x2060), @@ -195,6 +193,12 @@ static struct intc_group intca_groups[] __initdata = { INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), INTC_GROUP(IIC1, IIC1_ALI1, IIC1_TACKI1, IIC1_WAITI1, IIC1_DTEI1), + INTC_GROUP(SDHI0, SDHI0_SDHI0I0, SDHI0_SDHI0I1, + SDHI0_SDHI0I2, SDHI0_SDHI0I3), + INTC_GROUP(SDHI1, SDHI1_SDHI1I0, SDHI1_SDHI1I1, + SDHI1_SDHI1I2), + INTC_GROUP(SDHI2, SDHI2_SDHI2I0, SDHI2_SDHI2I1, + SDHI2_SDHI2I2, SDHI2_SDHI2I3), INTC_GROUP(SHWYSTAT, SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM), }; @@ -230,10 +234,10 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { { SCIFB, SCIFA5, SCIFA4, MSIOF1, 0, 0, MSIOF2, 0 } }, { 0xe694009c, 0xe69400dc, 8, /* IMR7A / IMCR7A */ - { DISABLED, ENABLED, ENABLED, ENABLED, + { SDHI0_SDHI0I3, SDHI0_SDHI0I2, SDHI0_SDHI0I1, SDHI0_SDHI0I0, FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } }, { 0xe69400a0, 0xe69400e0, 8, /* IMR8A / IMCR8A */ - { 0, ENABLED, ENABLED, ENABLED, + { 0, SDHI1_SDHI1I2, SDHI1_SDHI1I1, SDHI1_SDHI1I0, TTI20, USBHSDMAC0_USHDMI, 0, 0 } }, { 0xe69400a4, 0xe69400e4, 8, /* IMR9A / IMCR9A */ { CMT1_CMT13, CMT1_CMT12, CMT1_CMT11, CMT1_CMT10, @@ -248,7 +252,7 @@ static struct intc_mask_reg intca_mask_registers[] __initdata = { { 0, 0, TPU0, 0, 0, 0, 0, 0 } }, { 0xe69400b4, 0xe69400f4, 8, /* IMR13A / IMCR13A */ - { DISABLED, DISABLED, ENABLED, ENABLED, + { SDHI2_SDHI2I3, SDHI2_SDHI2I2, SDHI2_SDHI2I1, SDHI2_SDHI2I0, 0, CMT3, 0, RWDT0 } }, { 0xe6950080, 0xe69500c0, 8, /* IMR0A3 / IMCR0A3 */ { SHWYSTAT_RT, SHWYSTAT_HS, SHWYSTAT_COM, 0, @@ -354,14 +358,10 @@ static struct intc_mask_reg intca_ack_registers[] __initdata = { { IRQ24A, IRQ25A, IRQ26A, IRQ27A, IRQ28A, IRQ29A, IRQ30A, IRQ31A } }, }; -static struct intc_desc intca_desc __initdata = { - .name = "sh7372-intca", - .force_enable = ENABLED, - .force_disable = DISABLED, - .hw = INTC_HW_DESC(intca_vectors, intca_groups, - intca_mask_registers, intca_prio_registers, - intca_sense_registers, intca_ack_registers), -}; +static DECLARE_INTC_DESC_ACK(intca_desc, "sh7372-intca", + intca_vectors, intca_groups, + intca_mask_registers, intca_prio_registers, + intca_sense_registers, intca_ack_registers); enum { UNUSED_INTCS = 0, diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c new file mode 100644 index 000000000000..8e4aadf14c9f --- /dev/null +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -0,0 +1,108 @@ +/* + * sh7372 Power management support + * + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/cpuidle.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/tlbflush.h> +#include <mach/common.h> + +#define SMFRAM 0xe6a70000 +#define SYSTBCR 0xe6150024 +#define SBAR 0xe6180020 +#define APARMBAREA 0xe6f10020 + +static void sh7372_enter_core_standby(void) +{ + void __iomem *smfram = (void __iomem *)SMFRAM; + + __raw_writel(0, APARMBAREA); /* translate 4k */ + __raw_writel(__pa(sh7372_cpu_resume), SBAR); /* set reset vector */ + __raw_writel(0x10, SYSTBCR); /* enable core standby */ + + __raw_writel(0, smfram + 0x3c); /* clear page table address */ + + sh7372_cpu_suspend(); + cpu_init(); + + /* if page table address is non-NULL then we have been powered down */ + if (__raw_readl(smfram + 0x3c)) { + __raw_writel(__raw_readl(smfram + 0x40), + __va(__raw_readl(smfram + 0x3c))); + + flush_tlb_all(); + set_cr(__raw_readl(smfram + 0x38)); + } + + __raw_writel(0, SYSTBCR); /* disable core standby */ + __raw_writel(0, SBAR); /* disable reset vector translation */ +} + +#ifdef CONFIG_CPU_IDLE +static void sh7372_cpuidle_setup(struct cpuidle_device *dev) +{ + struct cpuidle_state *state; + int i = dev->state_count; + + state = &dev->states[i]; + snprintf(state->name, CPUIDLE_NAME_LEN, "C2"); + strncpy(state->desc, "Core Standby Mode", CPUIDLE_DESC_LEN); + state->exit_latency = 10; + state->target_residency = 20 + 10; + state->power_usage = 1; /* perhaps not */ + state->flags = 0; + state->flags |= CPUIDLE_FLAG_TIME_VALID; + shmobile_cpuidle_modes[i] = sh7372_enter_core_standby; + + dev->state_count = i + 1; +} + +static void sh7372_cpuidle_init(void) +{ + shmobile_cpuidle_setup = sh7372_cpuidle_setup; +} +#else +static void sh7372_cpuidle_init(void) {} +#endif + +#ifdef CONFIG_SUSPEND +static int sh7372_enter_suspend(suspend_state_t suspend_state) +{ + sh7372_enter_core_standby(); + return 0; +} + +static void sh7372_suspend_init(void) +{ + shmobile_suspend_ops.enter = sh7372_enter_suspend; +} +#else +static void sh7372_suspend_init(void) {} +#endif + +#define DBGREG1 0xe6100020 +#define DBGREG9 0xe6100040 + +void __init sh7372_pm_init(void) +{ + /* enable DBG hardware block to kick SYSC */ + __raw_writel(0x0000a500, DBGREG9); + __raw_writel(0x0000a501, DBGREG9); + __raw_writel(0x00000000, DBGREG1); + + sh7372_suspend_init(); + sh7372_cpuidle_init(); +} diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c index ce28141662da..2c10190dbb55 100644 --- a/arch/arm/mach-shmobile/setup-sh7367.c +++ b/arch/arm/mach-shmobile/setup-sh7367.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/uio_driver.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -195,6 +196,214 @@ static struct platform_device cmt10_device = { .num_resources = ARRAY_SIZE(cmt10_resources), }; +/* VPU */ +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = intcs_evt2irq(0x980), +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +/* VEU0 */ +static struct uio_info veu0_platform_data = { + .name = "VEU0", + .version = "0", + .irq = intcs_evt2irq(0x700), +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU0", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +/* VEU1 */ +static struct uio_info veu1_platform_data = { + .name = "VEU1", + .version = "0", + .irq = intcs_evt2irq(0x720), +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU1", + .start = 0xfe924000, + .end = 0xfe9240b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + +/* VEU2 */ +static struct uio_info veu2_platform_data = { + .name = "VEU2", + .version = "0", + .irq = intcs_evt2irq(0x740), +}; + +static struct resource veu2_resources[] = { + [0] = { + .name = "VEU2", + .start = 0xfe928000, + .end = 0xfe9280b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu2_device = { + .name = "uio_pdrv_genirq", + .id = 3, + .dev = { + .platform_data = &veu2_platform_data, + }, + .resource = veu2_resources, + .num_resources = ARRAY_SIZE(veu2_resources), +}; + +/* VEU3 */ +static struct uio_info veu3_platform_data = { + .name = "VEU3", + .version = "0", + .irq = intcs_evt2irq(0x760), +}; + +static struct resource veu3_resources[] = { + [0] = { + .name = "VEU3", + .start = 0xfe92c000, + .end = 0xfe92c0b7, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu3_device = { + .name = "uio_pdrv_genirq", + .id = 4, + .dev = { + .platform_data = &veu3_platform_data, + }, + .resource = veu3_resources, + .num_resources = ARRAY_SIZE(veu3_resources), +}; + +/* VEU2H */ +static struct uio_info veu2h_platform_data = { + .name = "VEU2H", + .version = "0", + .irq = intcs_evt2irq(0x520), +}; + +static struct resource veu2h_resources[] = { + [0] = { + .name = "VEU2H", + .start = 0xfe93c000, + .end = 0xfe93c27b, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu2h_device = { + .name = "uio_pdrv_genirq", + .id = 5, + .dev = { + .platform_data = &veu2h_platform_data, + }, + .resource = veu2h_resources, + .num_resources = ARRAY_SIZE(veu2h_resources), +}; + +/* JPU */ +static struct uio_info jpu_platform_data = { + .name = "JPU", + .version = "0", + .irq = intcs_evt2irq(0x560), +}; + +static struct resource jpu_resources[] = { + [0] = { + .name = "JPU", + .start = 0xfe980000, + .end = 0xfe9902d3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device jpu_device = { + .name = "uio_pdrv_genirq", + .id = 6, + .dev = { + .platform_data = &jpu_platform_data, + }, + .resource = jpu_resources, + .num_resources = ARRAY_SIZE(jpu_resources), +}; + +/* SPU1 */ +static struct uio_info spu1_platform_data = { + .name = "SPU1", + .version = "0", + .irq = evt2irq(0xfc0), +}; + +static struct resource spu1_resources[] = { + [0] = { + .name = "SPU1", + .start = 0xfe300000, + .end = 0xfe3fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spu1_device = { + .name = "uio_pdrv_genirq", + .id = 7, + .dev = { + .platform_data = &spu1_platform_data, + }, + .resource = spu1_resources, + .num_resources = ARRAY_SIZE(spu1_resources), +}; + static struct platform_device *sh7367_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -206,10 +415,24 @@ static struct platform_device *sh7367_early_devices[] __initdata = { &cmt10_device, }; +static struct platform_device *sh7367_devices[] __initdata = { + &vpu_device, + &veu0_device, + &veu1_device, + &veu2_device, + &veu3_device, + &veu2h_device, + &jpu_device, + &spu1_device, +}; + void __init sh7367_add_standard_devices(void) { platform_add_devices(sh7367_early_devices, ARRAY_SIZE(sh7367_early_devices)); + + platform_add_devices(sh7367_devices, + ARRAY_SIZE(sh7367_devices)); } #define SYMSTPCR2 0xe6158048 diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index ff0494f3d00c..cd807eea69e2 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/uio_driver.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -601,6 +602,214 @@ static struct platform_device dma2_device = { }, }; +/* VPU */ +static struct uio_info vpu_platform_data = { + .name = "VPU5HG", + .version = "0", + .irq = intcs_evt2irq(0x980), +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe900157, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +/* VEU0 */ +static struct uio_info veu0_platform_data = { + .name = "VEU0", + .version = "0", + .irq = intcs_evt2irq(0x700), +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU0", + .start = 0xfe920000, + .end = 0xfe9200cb, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +/* VEU1 */ +static struct uio_info veu1_platform_data = { + .name = "VEU1", + .version = "0", + .irq = intcs_evt2irq(0x720), +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU1", + .start = 0xfe924000, + .end = 0xfe9240cb, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + +/* VEU2 */ +static struct uio_info veu2_platform_data = { + .name = "VEU2", + .version = "0", + .irq = intcs_evt2irq(0x740), +}; + +static struct resource veu2_resources[] = { + [0] = { + .name = "VEU2", + .start = 0xfe928000, + .end = 0xfe928307, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu2_device = { + .name = "uio_pdrv_genirq", + .id = 3, + .dev = { + .platform_data = &veu2_platform_data, + }, + .resource = veu2_resources, + .num_resources = ARRAY_SIZE(veu2_resources), +}; + +/* VEU3 */ +static struct uio_info veu3_platform_data = { + .name = "VEU3", + .version = "0", + .irq = intcs_evt2irq(0x760), +}; + +static struct resource veu3_resources[] = { + [0] = { + .name = "VEU3", + .start = 0xfe92c000, + .end = 0xfe92c307, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu3_device = { + .name = "uio_pdrv_genirq", + .id = 4, + .dev = { + .platform_data = &veu3_platform_data, + }, + .resource = veu3_resources, + .num_resources = ARRAY_SIZE(veu3_resources), +}; + +/* JPU */ +static struct uio_info jpu_platform_data = { + .name = "JPU", + .version = "0", + .irq = intcs_evt2irq(0x560), +}; + +static struct resource jpu_resources[] = { + [0] = { + .name = "JPU", + .start = 0xfe980000, + .end = 0xfe9902d3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device jpu_device = { + .name = "uio_pdrv_genirq", + .id = 5, + .dev = { + .platform_data = &jpu_platform_data, + }, + .resource = jpu_resources, + .num_resources = ARRAY_SIZE(jpu_resources), +}; + +/* SPU2DSP0 */ +static struct uio_info spu0_platform_data = { + .name = "SPU2DSP0", + .version = "0", + .irq = evt2irq(0x1800), +}; + +static struct resource spu0_resources[] = { + [0] = { + .name = "SPU2DSP0", + .start = 0xfe200000, + .end = 0xfe2fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spu0_device = { + .name = "uio_pdrv_genirq", + .id = 6, + .dev = { + .platform_data = &spu0_platform_data, + }, + .resource = spu0_resources, + .num_resources = ARRAY_SIZE(spu0_resources), +}; + +/* SPU2DSP1 */ +static struct uio_info spu1_platform_data = { + .name = "SPU2DSP1", + .version = "0", + .irq = evt2irq(0x1820), +}; + +static struct resource spu1_resources[] = { + [0] = { + .name = "SPU2DSP1", + .start = 0xfe300000, + .end = 0xfe3fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spu1_device = { + .name = "uio_pdrv_genirq", + .id = 7, + .dev = { + .platform_data = &spu1_platform_data, + }, + .resource = spu1_resources, + .num_resources = ARRAY_SIZE(spu1_resources), +}; + static struct platform_device *sh7372_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -620,6 +829,14 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &vpu_device, + &veu0_device, + &veu1_device, + &veu2_device, + &veu3_device, + &jpu_device, + &spu0_device, + &spu1_device, }; void __init sh7372_add_standard_devices(void) diff --git a/arch/arm/mach-shmobile/setup-sh7377.c b/arch/arm/mach-shmobile/setup-sh7377.c index 8099b0b8a934..bb405b8e459b 100644 --- a/arch/arm/mach-shmobile/setup-sh7377.c +++ b/arch/arm/mach-shmobile/setup-sh7377.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/uio_driver.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -38,7 +39,7 @@ static struct plat_sci_port scif0_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00), evt2irq(0xc00) }, }; @@ -57,7 +58,7 @@ static struct plat_sci_port scif1_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20), evt2irq(0xc20) }, }; @@ -76,7 +77,7 @@ static struct plat_sci_port scif2_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40), evt2irq(0xc40) }, }; @@ -95,7 +96,7 @@ static struct plat_sci_port scif3_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60), evt2irq(0xc60) }, }; @@ -114,7 +115,7 @@ static struct plat_sci_port scif4_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20), evt2irq(0xd20) }, }; @@ -133,7 +134,7 @@ static struct plat_sci_port scif5_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40), evt2irq(0xd40) }, }; @@ -152,7 +153,7 @@ static struct plat_sci_port scif6_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFA, .irqs = { intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80), intcs_evt2irq(0x1a80) }, }; @@ -171,7 +172,7 @@ static struct plat_sci_port scif7_platform_data = { .flags = UPF_BOOT_AUTOCONF, .scscr = SCSCR_RE | SCSCR_TE, .scbrr_algo_id = SCBRR_ALGO_4, - .type = PORT_SCIF, + .type = PORT_SCIFB, .irqs = { evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60), evt2irq(0xd60) }, }; @@ -215,6 +216,214 @@ static struct platform_device cmt10_device = { .num_resources = ARRAY_SIZE(cmt10_resources), }; +/* VPU */ +static struct uio_info vpu_platform_data = { + .name = "VPU5HG", + .version = "0", + .irq = intcs_evt2irq(0x980), +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe900157, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +/* VEU0 */ +static struct uio_info veu0_platform_data = { + .name = "VEU0", + .version = "0", + .irq = intcs_evt2irq(0x700), +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU0", + .start = 0xfe920000, + .end = 0xfe9200cb, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +/* VEU1 */ +static struct uio_info veu1_platform_data = { + .name = "VEU1", + .version = "0", + .irq = intcs_evt2irq(0x720), +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU1", + .start = 0xfe924000, + .end = 0xfe9240cb, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + +/* VEU2 */ +static struct uio_info veu2_platform_data = { + .name = "VEU2", + .version = "0", + .irq = intcs_evt2irq(0x740), +}; + +static struct resource veu2_resources[] = { + [0] = { + .name = "VEU2", + .start = 0xfe928000, + .end = 0xfe928307, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu2_device = { + .name = "uio_pdrv_genirq", + .id = 3, + .dev = { + .platform_data = &veu2_platform_data, + }, + .resource = veu2_resources, + .num_resources = ARRAY_SIZE(veu2_resources), +}; + +/* VEU3 */ +static struct uio_info veu3_platform_data = { + .name = "VEU3", + .version = "0", + .irq = intcs_evt2irq(0x760), +}; + +static struct resource veu3_resources[] = { + [0] = { + .name = "VEU3", + .start = 0xfe92c000, + .end = 0xfe92c307, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device veu3_device = { + .name = "uio_pdrv_genirq", + .id = 4, + .dev = { + .platform_data = &veu3_platform_data, + }, + .resource = veu3_resources, + .num_resources = ARRAY_SIZE(veu3_resources), +}; + +/* JPU */ +static struct uio_info jpu_platform_data = { + .name = "JPU", + .version = "0", + .irq = intcs_evt2irq(0x560), +}; + +static struct resource jpu_resources[] = { + [0] = { + .name = "JPU", + .start = 0xfe980000, + .end = 0xfe9902d3, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device jpu_device = { + .name = "uio_pdrv_genirq", + .id = 5, + .dev = { + .platform_data = &jpu_platform_data, + }, + .resource = jpu_resources, + .num_resources = ARRAY_SIZE(jpu_resources), +}; + +/* SPU2DSP0 */ +static struct uio_info spu0_platform_data = { + .name = "SPU2DSP0", + .version = "0", + .irq = evt2irq(0x1800), +}; + +static struct resource spu0_resources[] = { + [0] = { + .name = "SPU2DSP0", + .start = 0xfe200000, + .end = 0xfe2fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spu0_device = { + .name = "uio_pdrv_genirq", + .id = 6, + .dev = { + .platform_data = &spu0_platform_data, + }, + .resource = spu0_resources, + .num_resources = ARRAY_SIZE(spu0_resources), +}; + +/* SPU2DSP1 */ +static struct uio_info spu1_platform_data = { + .name = "SPU2DSP1", + .version = "0", + .irq = evt2irq(0x1820), +}; + +static struct resource spu1_resources[] = { + [0] = { + .name = "SPU2DSP1", + .start = 0xfe300000, + .end = 0xfe3fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spu1_device = { + .name = "uio_pdrv_genirq", + .id = 7, + .dev = { + .platform_data = &spu1_platform_data, + }, + .resource = spu1_resources, + .num_resources = ARRAY_SIZE(spu1_resources), +}; + static struct platform_device *sh7377_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -227,10 +436,24 @@ static struct platform_device *sh7377_early_devices[] __initdata = { &cmt10_device, }; +static struct platform_device *sh7377_devices[] __initdata = { + &vpu_device, + &veu0_device, + &veu1_device, + &veu2_device, + &veu3_device, + &jpu_device, + &spu0_device, + &spu1_device, +}; + void __init sh7377_add_standard_devices(void) { platform_add_devices(sh7377_early_devices, ARRAY_SIZE(sh7377_early_devices)); + + platform_add_devices(sh7377_devices, + ARRAY_SIZE(sh7377_devices)); } #define SMSTPCR3 0xe615013c diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 685c40a2f5e6..e46821c0a62e 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -27,9 +27,11 @@ #include <linux/input.h> #include <linux/io.h> #include <linux/serial_sci.h> +#include <linux/sh_dma.h> #include <linux/sh_intc.h> #include <linux/sh_timer.h> #include <mach/hardware.h> +#include <mach/sh73a0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -392,6 +394,242 @@ static struct platform_device i2c4_device = { .num_resources = ARRAY_SIZE(i2c4_resources), }; +/* Transmit sizes and respective CHCR register values */ +enum { + XMIT_SZ_8BIT = 0, + XMIT_SZ_16BIT = 1, + XMIT_SZ_32BIT = 2, + XMIT_SZ_64BIT = 7, + XMIT_SZ_128BIT = 3, + XMIT_SZ_256BIT = 4, + XMIT_SZ_512BIT = 5, +}; + +/* log2(size / 8) - used to calculate number of transfers */ +#define TS_SHIFT { \ + [XMIT_SZ_8BIT] = 0, \ + [XMIT_SZ_16BIT] = 1, \ + [XMIT_SZ_32BIT] = 2, \ + [XMIT_SZ_64BIT] = 3, \ + [XMIT_SZ_128BIT] = 4, \ + [XMIT_SZ_256BIT] = 5, \ + [XMIT_SZ_512BIT] = 6, \ +} + +#define TS_INDEX2VAL(i) ((((i) & 3) << 3) | (((i) & 0xc) << (20 - 2))) +#define CHCR_TX(xmit_sz) (DM_FIX | SM_INC | 0x800 | TS_INDEX2VAL((xmit_sz))) +#define CHCR_RX(xmit_sz) (DM_INC | SM_FIX | 0x800 | TS_INDEX2VAL((xmit_sz))) + +static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = { + { + .slave_id = SHDMA_SLAVE_SCIF0_TX, + .addr = 0xe6c40020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x21, + }, { + .slave_id = SHDMA_SLAVE_SCIF0_RX, + .addr = 0xe6c40024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x22, + }, { + .slave_id = SHDMA_SLAVE_SCIF1_TX, + .addr = 0xe6c50020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x25, + }, { + .slave_id = SHDMA_SLAVE_SCIF1_RX, + .addr = 0xe6c50024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x26, + }, { + .slave_id = SHDMA_SLAVE_SCIF2_TX, + .addr = 0xe6c60020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x29, + }, { + .slave_id = SHDMA_SLAVE_SCIF2_RX, + .addr = 0xe6c60024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x2a, + }, { + .slave_id = SHDMA_SLAVE_SCIF3_TX, + .addr = 0xe6c70020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x2d, + }, { + .slave_id = SHDMA_SLAVE_SCIF3_RX, + .addr = 0xe6c70024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x2e, + }, { + .slave_id = SHDMA_SLAVE_SCIF4_TX, + .addr = 0xe6c80020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x39, + }, { + .slave_id = SHDMA_SLAVE_SCIF4_RX, + .addr = 0xe6c80024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x3a, + }, { + .slave_id = SHDMA_SLAVE_SCIF5_TX, + .addr = 0xe6cb0020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x35, + }, { + .slave_id = SHDMA_SLAVE_SCIF5_RX, + .addr = 0xe6cb0024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x36, + }, { + .slave_id = SHDMA_SLAVE_SCIF6_TX, + .addr = 0xe6cc0020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x1d, + }, { + .slave_id = SHDMA_SLAVE_SCIF6_RX, + .addr = 0xe6cc0024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x1e, + }, { + .slave_id = SHDMA_SLAVE_SCIF7_TX, + .addr = 0xe6cd0020, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x19, + }, { + .slave_id = SHDMA_SLAVE_SCIF7_RX, + .addr = 0xe6cd0024, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x1a, + }, { + .slave_id = SHDMA_SLAVE_SCIF8_TX, + .addr = 0xe6c30040, + .chcr = CHCR_TX(XMIT_SZ_8BIT), + .mid_rid = 0x3d, + }, { + .slave_id = SHDMA_SLAVE_SCIF8_RX, + .addr = 0xe6c30060, + .chcr = CHCR_RX(XMIT_SZ_8BIT), + .mid_rid = 0x3e, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_TX, + .addr = 0xee100030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xc1, + }, { + .slave_id = SHDMA_SLAVE_SDHI0_RX, + .addr = 0xee100030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xc2, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_TX, + .addr = 0xee120030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xc9, + }, { + .slave_id = SHDMA_SLAVE_SDHI1_RX, + .addr = 0xee120030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xca, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_TX, + .addr = 0xee140030, + .chcr = CHCR_TX(XMIT_SZ_16BIT), + .mid_rid = 0xcd, + }, { + .slave_id = SHDMA_SLAVE_SDHI2_RX, + .addr = 0xee140030, + .chcr = CHCR_RX(XMIT_SZ_16BIT), + .mid_rid = 0xce, + }, { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + .addr = 0xe6bd0034, + .chcr = CHCR_TX(XMIT_SZ_32BIT), + .mid_rid = 0xd1, + }, { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + .addr = 0xe6bd0034, + .chcr = CHCR_RX(XMIT_SZ_32BIT), + .mid_rid = 0xd2, + }, +}; + +#define DMAE_CHANNEL(_offset) \ + { \ + .offset = _offset - 0x20, \ + .dmars = _offset - 0x20 + 0x40, \ + } + +static const struct sh_dmae_channel sh73a0_dmae_channels[] = { + DMAE_CHANNEL(0x8000), + DMAE_CHANNEL(0x8080), + DMAE_CHANNEL(0x8100), + DMAE_CHANNEL(0x8180), + DMAE_CHANNEL(0x8200), + DMAE_CHANNEL(0x8280), + DMAE_CHANNEL(0x8300), + DMAE_CHANNEL(0x8380), + DMAE_CHANNEL(0x8400), + DMAE_CHANNEL(0x8480), + DMAE_CHANNEL(0x8500), + DMAE_CHANNEL(0x8580), + DMAE_CHANNEL(0x8600), + DMAE_CHANNEL(0x8680), + DMAE_CHANNEL(0x8700), + DMAE_CHANNEL(0x8780), + DMAE_CHANNEL(0x8800), + DMAE_CHANNEL(0x8880), + DMAE_CHANNEL(0x8900), + DMAE_CHANNEL(0x8980), +}; + +static const unsigned int ts_shift[] = TS_SHIFT; + +static struct sh_dmae_pdata sh73a0_dmae_platform_data = { + .slave = sh73a0_dmae_slaves, + .slave_num = ARRAY_SIZE(sh73a0_dmae_slaves), + .channel = sh73a0_dmae_channels, + .channel_num = ARRAY_SIZE(sh73a0_dmae_channels), + .ts_low_shift = 3, + .ts_low_mask = 0x18, + .ts_high_shift = (20 - 2), /* 2 bits for shifted low TS */ + .ts_high_mask = 0x00300000, + .ts_shift = ts_shift, + .ts_shift_num = ARRAY_SIZE(ts_shift), + .dmaor_init = DMAOR_DME, +}; + +static struct resource sh73a0_dmae_resources[] = { + { + /* Registers including DMAOR and channels including DMARSx */ + .start = 0xfe000020, + .end = 0xfe008a00 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* DMA error IRQ */ + .start = gic_spi(129), + .end = gic_spi(129), + .flags = IORESOURCE_IRQ, + }, + { + /* IRQ for channels 0-19 */ + .start = gic_spi(109), + .end = gic_spi(128), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device dma0_device = { + .name = "sh-dma-engine", + .id = 0, + .resource = sh73a0_dmae_resources, + .num_resources = ARRAY_SIZE(sh73a0_dmae_resources), + .dev = { + .platform_data = &sh73a0_dmae_platform_data, + }, +}; + static struct platform_device *sh73a0_early_devices[] __initdata = { &scif0_device, &scif1_device, @@ -413,10 +651,16 @@ static struct platform_device *sh73a0_late_devices[] __initdata = { &i2c2_device, &i2c3_device, &i2c4_device, + &dma0_device, }; +#define SRCR2 0xe61580b0 + void __init sh73a0_add_standard_devices(void) { + /* Clear software reset bit on SY-DMAC module */ + __raw_writel(__raw_readl(SRCR2) & ~(1 << 18), SRCR2); + platform_add_devices(sh73a0_early_devices, ARRAY_SIZE(sh73a0_early_devices)); platform_add_devices(sh73a0_late_devices, diff --git a/arch/arm/mach-shmobile/sleep-sh7372.S b/arch/arm/mach-shmobile/sleep-sh7372.S new file mode 100644 index 000000000000..d37d3ca4d18f --- /dev/null +++ b/arch/arm/mach-shmobile/sleep-sh7372.S @@ -0,0 +1,260 @@ +/* + * sh7372 lowlevel sleep code for "Core Standby Mode" + * + * Copyright (C) 2011 Magnus Damm + * + * In "Core Standby Mode" the ARM core is off, but L2 cache is still on + * + * Based on mach-omap2/sleep34xx.S + * + * (C) Copyright 2007 Texas Instruments + * Karthik Dasu <karthik-dp@ti.com> + * + * (C) Copyright 2004 Texas Instruments, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +#define SMFRAM 0xe6a70000 + + .align +kernel_flush: + .word v7_flush_dcache_all + + .align 3 +ENTRY(sh7372_cpu_suspend) + stmfd sp!, {r0-r12, lr} @ save registers on stack + + ldr r8, =SMFRAM + + mov r4, sp @ Store sp + mrs r5, spsr @ Store spsr + mov r6, lr @ Store lr + stmia r8!, {r4-r6} + + mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register + mrc p15, 0, r5, c2, c0, 0 @ TTBR0 + mrc p15, 0, r6, c2, c0, 1 @ TTBR1 + mrc p15, 0, r7, c2, c0, 2 @ TTBCR + stmia r8!, {r4-r7} + + mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register + mrc p15, 0, r5, c10, c2, 0 @ PRRR + mrc p15, 0, r6, c10, c2, 1 @ NMRR + stmia r8!,{r4-r6} + + mrc p15, 0, r4, c13, c0, 1 @ Context ID + mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID + mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address + mrs r7, cpsr @ Store current cpsr + stmia r8!, {r4-r7} + + mrc p15, 0, r4, c1, c0, 0 @ save control register + stmia r8!, {r4} + + /* + * jump out to kernel flush routine + * - reuse that code is better + * - it executes in a cached space so is faster than refetch per-block + * - should be faster and will change with kernel + * - 'might' have to copy address, load and jump to it + * Flush all data from the L1 data cache before disabling + * SCTLR.C bit. + */ + ldr r1, kernel_flush + mov lr, pc + bx r1 + + /* + * Clear the SCTLR.C bit to prevent further data cache + * allocation. Clearing SCTLR.C would make all the data accesses + * strongly ordered and would not hit the cache. + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #(1 << 2) @ Disable the C bit + mcr p15, 0, r0, c1, c0, 0 + isb + + /* + * Invalidate L1 data cache. Even though only invalidate is + * necessary exported flush API is used here. Doing clean + * on already clean cache would be almost NOP. + */ + ldr r1, kernel_flush + blx r1 + /* + * The kernel doesn't interwork: v7_flush_dcache_all in particluar will + * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled. + * This sequence switches back to ARM. Note that .align may insert a + * nop: bx pc needs to be word-aligned in order to work. + */ + THUMB( .thumb ) + THUMB( .align ) + THUMB( bx pc ) + THUMB( nop ) + .arm + + /* Data memory barrier and Data sync barrier */ + dsb + dmb + +/* + * =================================== + * == WFI instruction => Enter idle == + * =================================== + */ + wfi @ wait for interrupt + +/* + * =================================== + * == Resume path for non-OFF modes == + * =================================== + */ + mrc p15, 0, r0, c1, c0, 0 + tst r0, #(1 << 2) @ Check C bit enabled? + orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared + mcreq p15, 0, r0, c1, c0, 0 + isb + +/* + * =================================== + * == Exit point from non-OFF modes == + * =================================== + */ + ldmfd sp!, {r0-r12, pc} @ restore regs and return + + .pool + + .align 12 + .text + .global sh7372_cpu_resume +sh7372_cpu_resume: + + mov r1, #0 + /* + * Invalidate all instruction caches to PoU + * and flush branch target cache + */ + mcr p15, 0, r1, c7, c5, 0 + + ldr r3, =SMFRAM + + ldmia r3!, {r4-r6} + mov sp, r4 @ Restore sp + msr spsr_cxsf, r5 @ Restore spsr + mov lr, r6 @ Restore lr + + ldmia r3!, {r4-r7} + mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register + mcr p15, 0, r5, c2, c0, 0 @ TTBR0 + mcr p15, 0, r6, c2, c0, 1 @ TTBR1 + mcr p15, 0, r7, c2, c0, 2 @ TTBCR + + ldmia r3!,{r4-r6} + mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register + mcr p15, 0, r5, c10, c2, 0 @ PRRR + mcr p15, 0, r6, c10, c2, 1 @ NMRR + + ldmia r3!,{r4-r7} + mcr p15, 0, r4, c13, c0, 1 @ Context ID + mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID + mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address + msr cpsr, r7 @ store cpsr + + /* Starting to enable MMU here */ + mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl + /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ + and r7, #0x7 + cmp r7, #0x0 + beq usettbr0 +ttbr_error: + /* + * More work needs to be done to support N[0:2] value other than 0 + * So looping here so that the error can be detected + */ + b ttbr_error + + .align +cache_pred_disable_mask: + .word 0xFFFFE7FB +ttbrbit_mask: + .word 0xFFFFC000 +table_index_mask: + .word 0xFFF00000 +table_entry: + .word 0x00000C02 +usettbr0: + + mrc p15, 0, r2, c2, c0, 0 + ldr r5, ttbrbit_mask + and r2, r5 + mov r4, pc + ldr r5, table_index_mask + and r4, r5 @ r4 = 31 to 20 bits of pc + /* Extract the value to be written to table entry */ + ldr r6, table_entry + /* r6 has the value to be written to table entry */ + add r6, r6, r4 + /* Getting the address of table entry to modify */ + lsr r4, #18 + /* r2 has the location which needs to be modified */ + add r2, r4 + ldr r4, [r2] + str r6, [r2] /* modify the table entry */ + + mov r7, r6 + mov r5, r2 + mov r6, r4 + /* r5 = original page table address */ + /* r6 = original page table data */ + + mov r0, #0 + mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer + mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array + mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB + mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB + + /* + * Restore control register. This enables the MMU. + * The caches and prediction are not enabled here, they + * will be enabled after restoring the MMU table entry. + */ + ldmia r3!, {r4} + stmia r3!, {r5} /* save original page table address */ + stmia r3!, {r6} /* save original page table data */ + stmia r3!, {r7} /* save modified page table data */ + + ldr r2, cache_pred_disable_mask + and r4, r2 + mcr p15, 0, r4, c1, c0, 0 + dsb + isb + + ldr r0, =restoremmu_on + bx r0 + +/* + * ============================== + * == Exit point from OFF mode == + * ============================== + */ +restoremmu_on: + + ldmfd sp!, {r0-r12, pc} @ restore regs and return diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index a156d2108df1..3ffdbc92ba82 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -59,6 +59,11 @@ unsigned int __init sh73a0_get_core_count(void) { void __iomem *scu_base = scu_base_addr(); +#ifdef CONFIG_HAVE_ARM_TWD + /* twd_base needs to be initialized before percpu_timer_setup() */ + twd_base = (void __iomem *)0xf0000600; +#endif + return scu_get_core_count(scu_base); } @@ -82,10 +87,6 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu) void __init sh73a0_smp_prepare_cpus(void) { -#ifdef CONFIG_HAVE_ARM_TWD - twd_base = (void __iomem *)0xf0000600; -#endif - scu_enable(scu_base_addr()); /* Map the reset vector (in headsmp.S) */ diff --git a/arch/arm/mach-shmobile/suspend.c b/arch/arm/mach-shmobile/suspend.c new file mode 100644 index 000000000000..c1febe13f709 --- /dev/null +++ b/arch/arm/mach-shmobile/suspend.c @@ -0,0 +1,47 @@ +/* + * Suspend-to-RAM support code for SH-Mobile ARM + * + * Copyright (C) 2011 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/pm.h> +#include <linux/suspend.h> +#include <linux/module.h> +#include <linux/err.h> +#include <asm/system.h> +#include <asm/io.h> + +static int shmobile_suspend_default_enter(suspend_state_t suspend_state) +{ + cpu_do_idle(); + return 0; +} + +static int shmobile_suspend_begin(suspend_state_t state) +{ + disable_hlt(); + return 0; +} + +static void shmobile_suspend_end(void) +{ + enable_hlt(); +} + +struct platform_suspend_ops shmobile_suspend_ops = { + .begin = shmobile_suspend_begin, + .end = shmobile_suspend_end, + .enter = shmobile_suspend_default_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init shmobile_suspend_init(void) +{ + suspend_set_ops(&shmobile_suspend_ops); + return 0; +} +late_initcall(shmobile_suspend_init); diff --git a/arch/arm/mach-tegra/include/mach/kbc.h b/arch/arm/mach-tegra/include/mach/kbc.h index 04c779832c78..4f3572a1c684 100644 --- a/arch/arm/mach-tegra/include/mach/kbc.h +++ b/arch/arm/mach-tegra/include/mach/kbc.h @@ -50,13 +50,11 @@ struct tegra_kbc_platform_data { unsigned int debounce_cnt; unsigned int repeat_cnt; - unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */ - const struct tegra_kbc_wake_key *wake_cfg; - struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO]; const struct matrix_keymap_data *keymap_data; bool wakeup; bool use_fn_map; + bool use_ghost_filter; }; #endif diff --git a/arch/arm/mach-tegra/include/mach/sdhci.h b/arch/arm/mach-tegra/include/mach/sdhci.h index 3ad086e859c3..4231bc7b8652 100644 --- a/arch/arm/mach-tegra/include/mach/sdhci.h +++ b/arch/arm/mach-tegra/include/mach/sdhci.h @@ -24,6 +24,7 @@ struct tegra_sdhci_platform_data { int wp_gpio; int power_gpio; int is_8bit; + int pm_flags; }; #endif diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 58626013aa32..54429d015954 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -12,9 +12,12 @@ menu "Ux500 SoC" config UX500_SOC_DB5500 bool "DB5500" + select MFD_DB5500_PRCMU config UX500_SOC_DB8500 bool "DB8500" + select MFD_DB8500_PRCMU + select REGULATOR_DB8500_PRCMU endmenu diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index b549a8fb4231..1694916e6822 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -5,7 +5,7 @@ obj-y := clock.o cpu.o devices.o devices-common.o \ id.o usb.o obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o obj-$(CONFIG_MACH_U8500) += board-mop500.o board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-uib.o board-mop500-stuib.o \ @@ -17,4 +17,4 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o + diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 6e1907fa94f0..bb26f40493e6 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -204,7 +204,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = { }, }; -#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ +#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ * slave data setup time, which is \ @@ -219,19 +219,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ .rft = _rft, \ /* std. mode operation */ \ .clk_freq = clk, \ + /* Slave response timeout(ms) */\ + .timeout = t_out, \ .sm = _sm, \ } /* * The board uses 4 i2c controllers, initialize all of * them with slave data setup time of 250 ns, - * Tx & Rx FIFO threshold values as 1 and standard + * Tx & Rx FIFO threshold values as 8 and standard * mode of operation */ -U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); +U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); +U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST); static void __init mop500_i2c_init(void) { diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index c9dc2eff3cb2..c01bc19e3c5e 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -188,6 +188,8 @@ void __init u5500_map_io(void) ux500_map_io(); iotable_init(u5500_io_desc, ARRAY_SIZE(u5500_io_desc)); + + _PRCMU_BASE = __io_address(U5500_PRCMU_BASE); } static int usb_db5500_rx_dma_cfg[] = { diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 516126cb357d..c3c417656bd9 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -87,6 +87,8 @@ void __init u8500_map_io(void) iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); else if (cpu_is_u8500v2()) iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); + + _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); } static struct resource db8500_pmu_resources[] = { @@ -129,9 +131,14 @@ static struct platform_device db8500_pmu_device = { .dev.platform_data = &db8500_pmu_platdata, }; +static struct platform_device db8500_prcmu_device = { + .name = "db8500-prcmu", +}; + static struct platform_device *platform_devs[] __initdata = { &u8500_dma40_device, &db8500_pmu_device, + &db8500_prcmu_device, }; static resource_size_t __initdata db8500_gpio_base[] = { diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 5a43107c6232..1da23bb87c16 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -8,6 +8,8 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/mfd/db8500-prcmu.h> +#include <linux/mfd/db5500-prcmu.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -19,10 +21,11 @@ #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> -#include <mach/prcmu.h> #include "clock.h" +void __iomem *_PRCMU_BASE; + #ifdef CONFIG_CACHE_L2X0 static void __iomem *l2x0_base; #endif @@ -47,6 +50,8 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ + if (cpu_is_u5500()) + db5500_prcmu_early_init(); if (cpu_is_u8500()) prcmu_early_init(); clk_init(); diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c deleted file mode 100644 index 5c5b747f134d..000000000000 --- a/arch/arm/mach-ux500/cpufreq.c +++ /dev/null @@ -1,211 +0,0 @@ -/* - * CPU frequency scaling for u8500 - * Inspired by linux/arch/arm/mach-davinci/cpufreq.c - * - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Martin Persson <martin.persson@stericsson.com> - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> - * - */ - -#include <linux/platform_device.h> -#include <linux/kernel.h> -#include <linux/cpufreq.h> -#include <linux/delay.h> - -#include <mach/hardware.h> -#include <mach/prcmu.h> -#include <mach/prcmu-defs.h> - -#define DRIVER_NAME "cpufreq-u8500" -#define CPUFREQ_NAME "u8500" - -static struct device *dev; - -static struct cpufreq_frequency_table freq_table[] = { - [0] = { - .index = 0, - .frequency = 200000, - }, - [1] = { - .index = 1, - .frequency = 300000, - }, - [2] = { - .index = 2, - .frequency = 600000, - }, - [3] = { - /* Used for CPU_OPP_MAX, if available */ - .index = 3, - .frequency = CPUFREQ_TABLE_END, - }, - [4] = { - .index = 4, - .frequency = CPUFREQ_TABLE_END, - }, -}; - -static enum prcmu_cpu_opp index2opp[] = { - CPU_OPP_EXT_CLK, - CPU_OPP_50, - CPU_OPP_100, - CPU_OPP_MAX -}; - -static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, freq_table); -} - -static int u8500_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - unsigned int index; - int ret = 0; - - /* - * Ensure desired rate is within allowed range. Some govenors - * (ondemand) will just pass target_freq=0 to get the minimum. - */ - if (target_freq < policy->cpuinfo.min_freq) - target_freq = policy->cpuinfo.min_freq; - if (target_freq > policy->cpuinfo.max_freq) - target_freq = policy->cpuinfo.max_freq; - - ret = cpufreq_frequency_table_target(policy, freq_table, - target_freq, relation, &index); - if (ret < 0) { - dev_err(dev, "Could not look up next frequency\n"); - return ret; - } - - freqs.old = policy->cur; - freqs.new = freq_table[index].frequency; - freqs.cpu = policy->cpu; - - if (freqs.old == freqs.new) { - dev_dbg(dev, "Current and target frequencies are equal\n"); - return 0; - } - - dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new); - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - ret = prcmu_set_cpu_opp(index2opp[index]); - if (ret < 0) { - dev_err(dev, "Failed to set OPP level\n"); - return ret; - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -static unsigned int u8500_cpufreq_getspeed(unsigned int cpu) -{ - int i; - - for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++) - ; - return freq_table[i].frequency; -} - -static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy) -{ - int res; - - BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table)); - - if (cpu_is_u8500v2()) { - freq_table[1].frequency = 400000; - freq_table[2].frequency = 800000; - if (prcmu_has_arm_maxopp()) - freq_table[3].frequency = 1000000; - } - - /* get policy fields based on the table */ - res = cpufreq_frequency_table_cpuinfo(policy, freq_table); - if (!res) - cpufreq_frequency_table_get_attr(freq_table, policy->cpu); - else { - dev_err(dev, "u8500-cpufreq : Failed to read policy table\n"); - return res; - } - - policy->min = policy->cpuinfo.min_freq; - policy->max = policy->cpuinfo.max_freq; - policy->cur = u8500_cpufreq_getspeed(policy->cpu); - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - /* - * FIXME : Need to take time measurement across the target() - * function with no/some/all drivers in the notification - * list. - */ - policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */ - - /* policy sharing between dual CPUs */ - cpumask_copy(policy->cpus, &cpu_present_map); - - policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; - - return res; -} - -static struct freq_attr *u8500_cpufreq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; -static int u8500_cpu_exit(struct cpufreq_policy *policy) -{ - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static struct cpufreq_driver u8500_driver = { - .owner = THIS_MODULE, - .flags = CPUFREQ_STICKY, - .verify = u8500_cpufreq_verify_speed, - .target = u8500_cpufreq_target, - .get = u8500_cpufreq_getspeed, - .init = u8500_cpu_init, - .exit = u8500_cpu_exit, - .name = CPUFREQ_NAME, - .attr = u8500_cpufreq_attr, -}; - -static int __init u8500_cpufreq_probe(struct platform_device *pdev) -{ - dev = &pdev->dev; - return cpufreq_register_driver(&u8500_driver); -} - -static int __exit u8500_cpufreq_remove(struct platform_device *pdev) -{ - return cpufreq_unregister_driver(&u8500_driver); -} - -static struct platform_driver u8500_cpufreq_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .remove = __exit_p(u8500_cpufreq_remove), -}; - -static int __init u8500_cpufreq_init(void) -{ - return platform_driver_probe(&u8500_cpufreq_driver, - &u8500_cpufreq_probe); -} - -device_initcall(u8500_cpufreq_init); diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index bd88c1e74060..6ad983294103 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -17,6 +17,8 @@ #define U5500_GIC_DIST_BASE 0xA0411000 #define U5500_GIC_CPU_BASE 0xA0410100 #define U5500_DMA_BASE 0x90030000 +#define U5500_STM_BASE 0x90020000 +#define U5500_STM_REG_BASE (U5500_STM_BASE + 0xF000) #define U5500_MCDE_BASE 0xA0400000 #define U5500_MODEM_BASE 0xB0000000 #define U5500_L2CC_BASE 0xA0412000 @@ -29,7 +31,9 @@ #define U5500_NAND0_BASE 0x60000000 #define U5500_NAND1_BASE 0x70000000 #define U5500_TWD_BASE 0xa0410600 +#define U5500_ICN_BASE 0xA0040000 #define U5500_B2R2_BASE 0xa0200000 +#define U5500_BOOT_ROM_BASE 0x90000000 #define U5500_FSMC_BASE (U5500_PER1_BASE + 0x0000) #define U5500_SDI0_BASE (U5500_PER1_BASE + 0x1000) @@ -60,6 +64,7 @@ #define U5500_MSP1_BASE (U5500_PER4_BASE + 0x9000) #define U5500_GPIO2_BASE (U5500_PER4_BASE + 0xA000) #define U5500_CDETECT_BASE (U5500_PER4_BASE + 0xF000) +#define U5500_PRCMU_TCDM_BASE (U5500_PER4_BASE + 0x18000) #define U5500_SPI0_BASE (U5500_PER5_BASE + 0x0000) #define U5500_SPI1_BASE (U5500_PER5_BASE + 0x1000) @@ -83,7 +88,7 @@ #define U5500_HASH0_BASE (U5500_PER6_BASE + 0x1000) #define U5500_HASH1_BASE (U5500_PER6_BASE + 0x2000) #define U5500_PKA_BASE (U5500_PER6_BASE + 0x4000) -#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5000) +#define U5500_PKAM_BASE (U5500_PER6_BASE + 0x5100) #define U5500_MTU0_BASE (U5500_PER6_BASE + 0x6000) #define U5500_MTU1_BASE (U5500_PER6_BASE + 0x7000) #define U5500_CR_BASE (U5500_PER6_BASE + 0x8000) @@ -114,8 +119,19 @@ #define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) #define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) -#define U5500_ESRAM_BASE 0x40000000 +#define U5500_ACCCON_BASE_SEC (0xBFFF0000) +#define U5500_ACCCON_BASE (0xBFFF1000) +#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020) +#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC) + +#define U5500_ESRAM_BASE 0x40000000 #define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 #define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) +#define U5500_MCDE_SIZE 0x1000 +#define U5500_DSI_LINK_SIZE 0x1000 +#define U5500_DSI_LINK_COUNT 0x2 +#define U5500_DSI_LINK1_BASE (U5500_MCDE_BASE + U5500_MCDE_SIZE) +#define U5500_DSI_LINK2_BASE (U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE) + #endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 16647b255378..049997109cf9 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -15,8 +15,13 @@ #define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) -/* Use bank 4 for DMA LCPA */ -#define U8500_DMA_LCPA_BASE U8500_ESRAM_BANK4 +/* + * on V1 DMA uses 4KB for logical parameters position is right after the 64KB + * reserved for security + */ +#define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 + +#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) #define U8500_DMA_LCPA_BASE_ED (U8500_ESRAM_BANK4 + 0x4000) #define U8500_PER3_BASE 0x80000000 @@ -27,9 +32,12 @@ #define U8500_B2R2_BASE 0x80130000 #define U8500_HSEM_BASE 0x80140000 #define U8500_PER4_BASE 0x80150000 +#define U8500_TPIU_BASE 0x80190000 #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 +/* ASIC ID is at 0xbf4 offset within this region */ +#define U8500_ASIC_ID_BASE 0x9001D000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER5_BASE 0xa03e0000 @@ -70,13 +78,15 @@ /* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) -#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000) -#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) +#define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) +#define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) +#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) #define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ #define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ #define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ -#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000) -#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000) +#define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) +#define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) /* per5 base addresses */ @@ -93,7 +103,8 @@ #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) #define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) +#define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) @@ -124,6 +135,7 @@ #define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) #define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) #define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) +#define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) #define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) #define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) #define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) @@ -143,4 +155,15 @@ #define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) #define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE +#define U8500_MCDE_SIZE 0x1000 +#define U8500_DSI_LINK_SIZE 0x1000 +#define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) +#define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) +#define U8500_DSI_LINK_COUNT 0x3 + +/* Modem and APE physical addresses */ +#define U8500_MODEM_BASE 0xe000000 +#define U8500_APE_BASE 0x6000000 + #endif diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index bf63f2631ba0..2c6f71049f2e 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -35,6 +35,7 @@ #ifndef __ASSEMBLY__ #include <mach/id.h> +extern void __iomem *_PRCMU_BASE; #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/include/mach/id.h index f1288d10b6ab..02b541a37ee5 100644 --- a/arch/arm/mach-ux500/include/mach/id.h +++ b/arch/arm/mach-ux500/include/mach/id.h @@ -75,6 +75,26 @@ static inline bool __attribute_const__ cpu_is_u8500v2(void) return cpu_is_u8500() && ((dbx500_revision() & 0xf0) == 0xB0); } +static inline bool cpu_is_u8500v20(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB0); +} + +static inline bool cpu_is_u8500v21(void) +{ + return cpu_is_u8500() && (dbx500_revision() == 0xB1); +} + +static inline bool cpu_is_u8500v20_or_later(void) +{ + return cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11(); +} + +static inline bool ux500_is_svp(void) +{ + return false; +} + #define ux500_unknown_soc() BUG() #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 97ef55f84934..47969909836c 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -50,6 +50,11 @@ #define MOP500_IRQ_END MOP500_NR_IRQS +/* + * We may have several boards, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_BOARD_START remains the same for either board. + */ #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END #define IRQ_BOARD_END MOP500_IRQ_END diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h new file mode 100644 index 000000000000..29d972c7717b --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/irqs-board-u5500.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __MACH_IRQS_BOARD_U5500_H +#define __MACH_IRQS_BOARD_U5500_H + +#define AB5500_NR_IRQS 5 +#define IRQ_AB5500_BASE IRQ_BOARD_START +#define IRQ_AB5500_END (IRQ_AB5500_BASE + AB5500_NR_IRQS) + +#define U5500_IRQ_END IRQ_AB5500_END + +#if IRQ_BOARD_END < U5500_IRQ_END +#undef IRQ_BOARD_END +#define IRQ_BOARD_END U5500_IRQ_END +#endif + +#endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db5500.h b/arch/arm/mach-ux500/include/mach/irqs-db5500.h index bfa123dbec3b..77239776a6f2 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db5500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db5500.h @@ -83,4 +83,31 @@ #define IRQ_DB5500_GPIO6 (IRQ_SHPI_START + 125) #define IRQ_DB5500_GPIO7 (IRQ_SHPI_START + 126) +#ifdef CONFIG_UX500_SOC_DB5500 + +/* + * After the GPIO ones we reserve a range of IRQ:s in which virtual + * IRQ:s representing modem IRQ:s can be allocated + */ +#define IRQ_MODEM_EVENTS_BASE IRQ_SOC_START +#define IRQ_MODEM_EVENTS_NBR 72 +#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) + +/* List of virtual IRQ:s that are allocated from the range above */ +#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) +#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) +#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_MODEM_EVENTS_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_MODEM_EVENTS_END +#endif + +#endif /* CONFIG_UX500_SOC_DB5500 */ + #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h index 8b5d9f0a1633..68bc14974608 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -93,4 +93,58 @@ #define IRQ_DB8500_GPIO7 (IRQ_SHPI_START + 126) #define IRQ_DB8500_GPIO8 (IRQ_SHPI_START + 127) +#define IRQ_CA_WAKE_REQ_ED (IRQ_SHPI_START + 71) +#define IRQ_AC_READ_NOTIFICATION_0_ED (IRQ_SHPI_START + 66) +#define IRQ_AC_READ_NOTIFICATION_1_ED (IRQ_SHPI_START + 64) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_ED (IRQ_SHPI_START + 67) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_ED (IRQ_SHPI_START + 65) + +#define IRQ_CA_WAKE_REQ_V1 (IRQ_SHPI_START + 83) +#define IRQ_AC_READ_NOTIFICATION_0_V1 (IRQ_SHPI_START + 78) +#define IRQ_AC_READ_NOTIFICATION_1_V1 (IRQ_SHPI_START + 76) +#define IRQ_CA_MSG_PEND_NOTIFICATION_0_V1 (IRQ_SHPI_START + 79) +#define IRQ_CA_MSG_PEND_NOTIFICATION_1_V1 (IRQ_SHPI_START + 77) + +#ifdef CONFIG_UX500_SOC_DB8500 + +/* Virtual interrupts corresponding to the PRCMU wakeups. */ +#define IRQ_PRCMU_BASE IRQ_SOC_START +#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) + +#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) +#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) +#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) +#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) +#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) +#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) +#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) +#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) +#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) +#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) +#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) +#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) +#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) +#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) +#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) +#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) +#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) +#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) +#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) +#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) +#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) +#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) +#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) +#define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) + +/* + * We may have several SoCs, but only one will run at a + * time, so the one with most IRQs will bump this ahead, + * but the IRQ_SOC_START remains the same for either SoC. + */ +#if IRQ_SOC_END < IRQ_PRCMU_END +#undef IRQ_SOC_END +#define IRQ_SOC_END IRQ_PRCMU_END +#endif + +#endif /* CONFIG_UX500_SOC_DB8500 */ #endif diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index ba1294c13c4d..9db68d264c5f 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -10,49 +10,47 @@ #ifndef ASM_ARCH_IRQS_H #define ASM_ARCH_IRQS_H -#include <mach/irqs-db5500.h> -#include <mach/irqs-db8500.h> +#include <mach/hardware.h> -#define IRQ_LOCALTIMER 29 -#define IRQ_LOCALWDOG 30 +#define IRQ_LOCALTIMER 29 +#define IRQ_LOCALWDOG 30 /* Shared Peripheral Interrupt (SHPI) */ #define IRQ_SHPI_START 32 -/* Interrupt numbers generic for shared peripheral */ +/* + * MTU0 preserved for now until plat-nomadik is taught not to use it. Don't + * add any other IRQs here, use the irqs-dbx500.h files. + */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -/* There are 128 shared peripheral interrupts assigned to - * INTID[160:32]. The first 32 interrupts are reserved. - */ -#define DBX500_NR_INTERNAL_IRQS 161 +#define DBX500_NR_INTERNAL_IRQS 160 /* After chip-specific IRQ numbers we have the GPIO ones */ #define NOMADIK_NR_GPIO 288 #define NOMADIK_GPIO_TO_IRQ(gpio) ((gpio) + DBX500_NR_INTERNAL_IRQS) #define NOMADIK_IRQ_TO_GPIO(irq) ((irq) - DBX500_NR_INTERNAL_IRQS) -#define IRQ_BOARD_START NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) +#define IRQ_GPIO_END NOMADIK_GPIO_TO_IRQ(NOMADIK_NR_GPIO) + +#define IRQ_SOC_START IRQ_GPIO_END +/* This will be overridden by SoC-specific irq headers */ +#define IRQ_SOC_END IRQ_SOC_START +#include <mach/irqs-db5500.h> +#include <mach/irqs-db8500.h> + +#define IRQ_BOARD_START IRQ_SOC_END /* This will be overridden by board-specific irq headers */ -#define IRQ_BOARD_END IRQ_BOARD_START +#define IRQ_BOARD_END IRQ_BOARD_START #ifdef CONFIG_MACH_U8500 #include <mach/irqs-board-mop500.h> #endif -/* - * After the board specific IRQ:s we reserve a range of IRQ:s in which virtual - * IRQ:s representing modem IRQ:s can be allocated - */ -#define IRQ_MODEM_EVENTS_BASE (IRQ_BOARD_END + 1) -#define IRQ_MODEM_EVENTS_NBR 72 -#define IRQ_MODEM_EVENTS_END (IRQ_MODEM_EVENTS_BASE + IRQ_MODEM_EVENTS_NBR) - -/* List of virtual IRQ:s that are allocated from the range above */ -#define MBOX_PAIR0_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 43) -#define MBOX_PAIR1_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 45) -#define MBOX_PAIR2_VIRT_IRQ (IRQ_MODEM_EVENTS_BASE + 41) +#ifdef CONFIG_MACH_U5500 +#include <mach/irqs-board-u5500.h> +#endif -#define NR_IRQS IRQ_MODEM_EVENTS_END +#define NR_IRQS IRQ_BOARD_END #endif /* ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h deleted file mode 100644 index 848ba64b561f..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu-defs.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Martin Persson <martin.persson@stericsson.com> - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit definitions - */ - -#ifndef __MACH_PRCMU_DEFS_H -#define __MACH_PRCMU_DEFS_H - -enum prcmu_cpu_opp { - CPU_OPP_INIT = 0x00, - CPU_OPP_NO_CHANGE = 0x01, - CPU_OPP_100 = 0x02, - CPU_OPP_50 = 0x03, - CPU_OPP_MAX = 0x04, - CPU_OPP_EXT_CLK = 0x07 -}; -enum prcmu_ape_opp { - APE_OPP_NO_CHANGE = 0x00, - APE_OPP_100 = 0x02, - APE_OPP_50 = 0x03, -}; - -#endif /* __MACH_PRCMU_DEFS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h deleted file mode 100644 index 455467e88791..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit registers - */ - -#ifndef __MACH_PRCMU_REGS_H -#define __MACH_PRCMU_REGS_H - -#include <mach/hardware.h> - -#define _PRCMU_BASE IO_ADDRESS(U8500_PRCMU_BASE) - -#define PRCM_ARM_PLLDIVPS (_PRCMU_BASE + 0x118) -#define PRCM_ARM_CHGCLKREQ (_PRCMU_BASE + 0x114) -#define PRCM_PLLARM_ENABLE (_PRCMU_BASE + 0x98) -#define PRCM_ARMCLKFIX_MGT (_PRCMU_BASE + 0x0) -#define PRCM_A9_RESETN_CLR (_PRCMU_BASE + 0x1f4) -#define PRCM_A9_RESETN_SET (_PRCMU_BASE + 0x1f0) -#define PRCM_ARM_LS_CLAMP (_PRCMU_BASE + 0x30c) -#define PRCM_SRAM_A9 (_PRCMU_BASE + 0x308) - -/* ARM WFI Standby signal register */ -#define PRCM_ARM_WFI_STANDBY (_PRCMU_BASE + 0x130) -#define PRCMU_IOCR (_PRCMU_BASE + 0x310) - -/* CPU mailbox registers */ -#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc) -#define PRCM_MBOX_CPU_SET (_PRCMU_BASE + 0x100) -#define PRCM_MBOX_CPU_CLR (_PRCMU_BASE + 0x104) - -/* Dual A9 core interrupt management unit registers */ -#define PRCM_A9_MASK_REQ (_PRCMU_BASE + 0x328) -#define PRCM_A9_MASK_ACK (_PRCMU_BASE + 0x32c) -#define PRCM_ARMITMSK31TO0 (_PRCMU_BASE + 0x11c) -#define PRCM_ARMITMSK63TO32 (_PRCMU_BASE + 0x120) -#define PRCM_ARMITMSK95TO64 (_PRCMU_BASE + 0x124) -#define PRCM_ARMITMSK127TO96 (_PRCMU_BASE + 0x128) -#define PRCM_POWER_STATE_VAL (_PRCMU_BASE + 0x25C) -#define PRCM_ARMITVAL31TO0 (_PRCMU_BASE + 0x260) -#define PRCM_ARMITVAL63TO32 (_PRCMU_BASE + 0x264) -#define PRCM_ARMITVAL95TO64 (_PRCMU_BASE + 0x268) -#define PRCM_ARMITVAL127TO96 (_PRCMU_BASE + 0x26C) - -#define PRCM_HOSTACCESS_REQ (_PRCMU_BASE + 0x334) -#define ARM_WAKEUP_MODEM 0x1 - -#define PRCM_ARM_IT1_CLEAR (_PRCMU_BASE + 0x48C) -#define PRCM_ARM_IT1_VAL (_PRCMU_BASE + 0x494) -#define PRCM_HOLD_EVT (_PRCMU_BASE + 0x174) - -#define PRCM_ITSTATUS0 (_PRCMU_BASE + 0x148) -#define PRCM_ITSTATUS1 (_PRCMU_BASE + 0x150) -#define PRCM_ITSTATUS2 (_PRCMU_BASE + 0x158) -#define PRCM_ITSTATUS3 (_PRCMU_BASE + 0x160) -#define PRCM_ITSTATUS4 (_PRCMU_BASE + 0x168) -#define PRCM_ITSTATUS5 (_PRCMU_BASE + 0x484) -#define PRCM_ITCLEAR5 (_PRCMU_BASE + 0x488) -#define PRCM_ARMIT_MASKXP70_IT (_PRCMU_BASE + 0x1018) - -/* System reset register */ -#define PRCM_APE_SOFTRST (_PRCMU_BASE + 0x228) - -/* Level shifter and clamp control registers */ -#define PRCM_MMIP_LS_CLAMP_SET (_PRCMU_BASE + 0x420) -#define PRCM_MMIP_LS_CLAMP_CLR (_PRCMU_BASE + 0x424) - -/* PRCMU clock/PLL/reset registers */ -#define PRCM_PLLDSI_FREQ (_PRCMU_BASE + 0x500) -#define PRCM_PLLDSI_ENABLE (_PRCMU_BASE + 0x504) -#define PRCM_LCDCLK_MGT (_PRCMU_BASE + 0x044) -#define PRCM_MCDECLK_MGT (_PRCMU_BASE + 0x064) -#define PRCM_HDMICLK_MGT (_PRCMU_BASE + 0x058) -#define PRCM_TVCLK_MGT (_PRCMU_BASE + 0x07c) -#define PRCM_DSI_PLLOUT_SEL (_PRCMU_BASE + 0x530) -#define PRCM_DSITVCLK_DIV (_PRCMU_BASE + 0x52C) -#define PRCM_APE_RESETN_SET (_PRCMU_BASE + 0x1E4) -#define PRCM_APE_RESETN_CLR (_PRCMU_BASE + 0x1E8) - -/* ePOD and memory power signal control registers */ -#define PRCM_EPOD_C_SET (_PRCMU_BASE + 0x410) -#define PRCM_SRAM_LS_SLEEP (_PRCMU_BASE + 0x304) - -/* Debug power control unit registers */ -#define PRCM_POWER_STATE_SET (_PRCMU_BASE + 0x254) - -/* Miscellaneous unit registers */ -#define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) - -#endif /* __MACH_PRCMU_REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h deleted file mode 100644 index c49e456162ef..000000000000 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> - * - * License Terms: GNU General Public License v2 - * - * PRCM Unit f/w API - */ -#ifndef __MACH_PRCMU_H -#define __MACH_PRCMU_H -#include <mach/prcmu-defs.h> - -void __init prcmu_early_init(void); -int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); -int prcmu_set_ape_opp(enum prcmu_ape_opp opp); -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp); -int prcmu_get_ape_opp(void); -int prcmu_get_cpu_opp(void); -bool prcmu_has_arm_maxopp(void); - -#endif /* __MACH_PRCMU_H */ diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c deleted file mode 100644 index c522d26ef348..000000000000 --- a/arch/arm/mach-ux500/prcmu.c +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright (C) STMicroelectronics 2009 - * Copyright (C) ST-Ericsson SA 2010 - * - * License Terms: GNU General Public License v2 - * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> - * Author: Sundar Iyer <sundar.iyer@stericsson.com> - * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> - * - * U8500 PRCM Unit interface driver - * - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/mutex.h> -#include <linux/completion.h> -#include <linux/jiffies.h> -#include <linux/bitops.h> -#include <linux/interrupt.h> - -#include <mach/hardware.h> -#include <mach/prcmu-regs.h> -#include <mach/prcmu-defs.h> - -/* Global var to runtime determine TCDM base for v2 or v1 */ -static __iomem void *tcdm_base; - -#define _MBOX_HEADER (tcdm_base + 0xFE8) -#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) - -#define REQ_MB1 (tcdm_base + 0xFD0) -#define REQ_MB5 (tcdm_base + 0xE44) - -#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) -#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) -#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) - -#define ACK_MB1 (tcdm_base + 0xE04) -#define ACK_MB5 (tcdm_base + 0xDF4) - -#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) -#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) - -#define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) -#define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) -#define REQ_MB5_I2C_REG (REQ_MB5 + 2) -#define REQ_MB5_I2C_VAL (REQ_MB5 + 3) - -#define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) -#define ACK_MB5_I2C_VAL (ACK_MB5 + 3) - -#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) -#define PRCM_AVS_ISMODEENABLE 7 -#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) - -#define I2C_WRITE(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define I2C_READ(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) -#define I2C_STOP_EN BIT(3) - -enum mb1_h { - MB1H_ARM_OPP = 1, - MB1H_APE_OPP, - MB1H_ARM_APE_OPP, -}; - -static struct { - struct mutex lock; - struct completion work; - struct { - u8 arm_opp; - u8 ape_opp; - u8 arm_status; - u8 ape_status; - } ack; -} mb1_transfer; - -enum ack_mb5_status { - I2C_WR_OK = 0x01, - I2C_RD_OK = 0x02, -}; - -#define MBOX_BIT BIT -#define NUM_MBOX 8 - -static struct { - struct mutex lock; - struct completion work; - bool failed; - struct { - u8 status; - u8 value; - } ack; -} mb5_transfer; - -/** - * prcmu_abb_read() - Read register value(s) from the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The read out value(s). - * @size: The number of registers to read. - * - * Reads register value(s) from the ABB. - * @size has to be 1 for the current firmware version. - */ -int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if (size != 1) - return -EINVAL; - - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - - writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_read timed out.\n"); - r = -EIO; - goto unlock_and_return; - } - r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO); - if (!r) - *value = mb5_transfer.ack.value; - -unlock_and_return: - mutex_unlock(&mb5_transfer.lock); - return r; -} -EXPORT_SYMBOL(prcmu_abb_read); - -/** - * prcmu_abb_write() - Write register value(s) to the ABB. - * @slave: The I2C slave address. - * @reg: The (start) register address. - * @value: The value(s) to write. - * @size: The number of registers to write. - * - * Reads register value(s) from the ABB. - * @size has to be 1 for the current firmware version. - */ -int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size) -{ - int r; - - if (size != 1) - return -EINVAL; - - r = mutex_lock_interruptible(&mb5_transfer.lock); - if (r) - return r; - - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5)) - cpu_relax(); - - writeb(I2C_WRITE(slave), REQ_MB5_I2C_SLAVE_OP); - writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS); - writeb(reg, REQ_MB5_I2C_REG); - writeb(*value, REQ_MB5_I2C_VAL); - - writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET); - if (!wait_for_completion_timeout(&mb5_transfer.work, - msecs_to_jiffies(500))) { - pr_err("prcmu: prcmu_abb_write timed out.\n"); - r = -EIO; - goto unlock_and_return; - } - r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO); - -unlock_and_return: - mutex_unlock(&mb5_transfer.lock); - return r; -} -EXPORT_SYMBOL(prcmu_abb_write); - -static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) -{ - bool do_ape; - bool do_arm; - int err = 0; - - do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); - do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); - - mutex_lock(&mb1_transfer.lock); - - while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) - cpu_relax(); - - writeb(0, MBOX_HEADER_REQ_MB0); - writeb(cpu_opp, REQ_MB1_ARMOPP); - writeb(ape_opp, REQ_MB1_APEOPP); - writeb(0, REQ_MB1_BOOSTOPP); - writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); - wait_for_completion(&mb1_transfer.work); - if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) - err = -EIO; - if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) - err = -EIO; - - mutex_unlock(&mb1_transfer.lock); - - return err; -} - -/** - * prcmu_set_ape_opp() - Set the OPP of the APE. - * @opp: The OPP to set. - * - * This function sets the OPP of the APE. - */ -int prcmu_set_ape_opp(enum prcmu_ape_opp opp) -{ - return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); -} -EXPORT_SYMBOL(prcmu_set_ape_opp); - -/** - * prcmu_set_cpu_opp() - Set the OPP of the CPU. - * @opp: The OPP to set. - * - * This function sets the OPP of the CPU. - */ -int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) -{ - return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); -} -EXPORT_SYMBOL(prcmu_set_cpu_opp); - -/** - * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. - * @ape_opp: The APE OPP to set. - * @cpu_opp: The CPU OPP to set. - * - * This function sets the OPPs of the APE and the CPU. - */ -int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, - enum prcmu_cpu_opp cpu_opp) -{ - return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); -} -EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); - -/** - * prcmu_get_ape_opp() - Get the OPP of the APE. - * - * This function gets the OPP of the APE. - */ -enum prcmu_ape_opp prcmu_get_ape_opp(void) -{ - return readb(ACK_MB1_CURR_APEOPP); -} -EXPORT_SYMBOL(prcmu_get_ape_opp); - -/** - * prcmu_get_cpu_opp() - Get the OPP of the CPU. - * - * This function gets the OPP of the CPU. The OPP is specified in %%. - * PRCMU_OPP_EXT is a special OPP value, not specified in %%. - */ -int prcmu_get_cpu_opp(void) -{ - return readb(ACK_MB1_CURR_ARMOPP); -} -EXPORT_SYMBOL(prcmu_get_cpu_opp); - -bool prcmu_has_arm_maxopp(void) -{ - return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) - == PRCM_AVS_ISMODEENABLE_MASK; -} - -static void read_mailbox_0(void) -{ - writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_1(void) -{ - mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); - mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); - complete(&mb1_transfer.work); - writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_2(void) -{ - writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_3(void) -{ - writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_4(void) -{ - writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_5(void) -{ - mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS); - mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL); - complete(&mb5_transfer.work); - writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_6(void) -{ - writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR); -} - -static void read_mailbox_7(void) -{ - writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR); -} - -static void (* const read_mailbox[NUM_MBOX])(void) = { - read_mailbox_0, - read_mailbox_1, - read_mailbox_2, - read_mailbox_3, - read_mailbox_4, - read_mailbox_5, - read_mailbox_6, - read_mailbox_7 -}; - -static irqreturn_t prcmu_irq_handler(int irq, void *data) -{ - u32 bits; - u8 n; - - bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1)); - if (unlikely(!bits)) - return IRQ_NONE; - - for (n = 0; bits; n++) { - if (bits & MBOX_BIT(n)) { - bits -= MBOX_BIT(n); - read_mailbox[n](); - } - } - return IRQ_HANDLED; -} - -void __init prcmu_early_init(void) -{ - if (cpu_is_u8500v11() || cpu_is_u8500ed()) { - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); - } else if (cpu_is_u8500v2()) { - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); - } else { - pr_err("prcmu: Unsupported chip version\n"); - BUG(); - } -} - -static int __init prcmu_init(void) -{ - if (cpu_is_u8500ed()) { - pr_err("prcmu: Unsupported chip version\n"); - return 0; - } - - mutex_init(&mb1_transfer.lock); - init_completion(&mb1_transfer.work); - mutex_init(&mb5_transfer.lock); - init_completion(&mb5_transfer.work); - - /* Clean up the mailbox interrupts after pre-kernel code. */ - writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); - - return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, - "prcmu", NULL); -} - -arch_initcall(prcmu_init); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 76f82ae44efb..3f17ea146f0e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -85,7 +85,7 @@ void show_mem(unsigned int filter) struct meminfo * mi = &meminfo; printk("Mem-info:\n"); - show_free_areas(); + show_free_areas(filter); for_each_bank (i, mi) { struct membank *bank = &mi->bank[i]; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6cf76b3b68d1..08a92368d9d3 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -31,8 +31,6 @@ #include "mm.h" -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * empty_zero_page is a special page that is used for * zero-initialized data and COW. diff --git a/arch/arm/plat-nomadik/include/plat/i2c.h b/arch/arm/plat-nomadik/include/plat/i2c.h index 1621db67a53d..8ba70ffc31ec 100644 --- a/arch/arm/plat-nomadik/include/plat/i2c.h +++ b/arch/arm/plat-nomadik/include/plat/i2c.h @@ -11,8 +11,8 @@ enum i2c_freq_mode { I2C_FREQ_MODE_STANDARD, /* up to 100 Kb/s */ I2C_FREQ_MODE_FAST, /* up to 400 Kb/s */ + I2C_FREQ_MODE_HIGH_SPEED, /* up to 3.4 Mb/s */ I2C_FREQ_MODE_FAST_PLUS, /* up to 1 Mb/s */ - I2C_FREQ_MODE_HIGH_SPEED /* up to 3.4 Mb/s */ }; /** @@ -24,13 +24,15 @@ enum i2c_freq_mode { * to the values of 14, 6, 2 for a 48 MHz i2c clk * @tft: Tx FIFO Threshold in bytes * @rft: Rx FIFO Threshold in bytes + * @timeout Slave response timeout(ms) * @sm: speed mode */ struct nmk_i2c_controller { unsigned long clk_freq; unsigned short slsu; - unsigned char tft; - unsigned char rft; + unsigned char tft; + unsigned char rft; + int timeout; enum i2c_freq_mode sm; }; diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h deleted file mode 100644 index 5e04ddc18fa8..000000000000 --- a/arch/arm/plat-omap/include/plat/display.h +++ /dev/null @@ -1,591 +0,0 @@ -/* - * linux/include/asm-arm/arch-omap/display.h - * - * Copyright (C) 2008 Nokia Corporation - * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __ASM_ARCH_OMAP_DISPLAY_H -#define __ASM_ARCH_OMAP_DISPLAY_H - -#include <linux/list.h> -#include <linux/kobject.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <asm/atomic.h> - -#define DISPC_IRQ_FRAMEDONE (1 << 0) -#define DISPC_IRQ_VSYNC (1 << 1) -#define DISPC_IRQ_EVSYNC_EVEN (1 << 2) -#define DISPC_IRQ_EVSYNC_ODD (1 << 3) -#define DISPC_IRQ_ACBIAS_COUNT_STAT (1 << 4) -#define DISPC_IRQ_PROG_LINE_NUM (1 << 5) -#define DISPC_IRQ_GFX_FIFO_UNDERFLOW (1 << 6) -#define DISPC_IRQ_GFX_END_WIN (1 << 7) -#define DISPC_IRQ_PAL_GAMMA_MASK (1 << 8) -#define DISPC_IRQ_OCP_ERR (1 << 9) -#define DISPC_IRQ_VID1_FIFO_UNDERFLOW (1 << 10) -#define DISPC_IRQ_VID1_END_WIN (1 << 11) -#define DISPC_IRQ_VID2_FIFO_UNDERFLOW (1 << 12) -#define DISPC_IRQ_VID2_END_WIN (1 << 13) -#define DISPC_IRQ_SYNC_LOST (1 << 14) -#define DISPC_IRQ_SYNC_LOST_DIGIT (1 << 15) -#define DISPC_IRQ_WAKEUP (1 << 16) -#define DISPC_IRQ_SYNC_LOST2 (1 << 17) -#define DISPC_IRQ_VSYNC2 (1 << 18) -#define DISPC_IRQ_ACBIAS_COUNT_STAT2 (1 << 21) -#define DISPC_IRQ_FRAMEDONE2 (1 << 22) - -struct omap_dss_device; -struct omap_overlay_manager; - -enum omap_display_type { - OMAP_DISPLAY_TYPE_NONE = 0, - OMAP_DISPLAY_TYPE_DPI = 1 << 0, - OMAP_DISPLAY_TYPE_DBI = 1 << 1, - OMAP_DISPLAY_TYPE_SDI = 1 << 2, - OMAP_DISPLAY_TYPE_DSI = 1 << 3, - OMAP_DISPLAY_TYPE_VENC = 1 << 4, - OMAP_DISPLAY_TYPE_HDMI = 1 << 5, -}; - -enum omap_plane { - OMAP_DSS_GFX = 0, - OMAP_DSS_VIDEO1 = 1, - OMAP_DSS_VIDEO2 = 2 -}; - -enum omap_channel { - OMAP_DSS_CHANNEL_LCD = 0, - OMAP_DSS_CHANNEL_DIGIT = 1, - OMAP_DSS_CHANNEL_LCD2 = 2, -}; - -enum omap_color_mode { - OMAP_DSS_COLOR_CLUT1 = 1 << 0, /* BITMAP 1 */ - OMAP_DSS_COLOR_CLUT2 = 1 << 1, /* BITMAP 2 */ - OMAP_DSS_COLOR_CLUT4 = 1 << 2, /* BITMAP 4 */ - OMAP_DSS_COLOR_CLUT8 = 1 << 3, /* BITMAP 8 */ - OMAP_DSS_COLOR_RGB12U = 1 << 4, /* RGB12, 16-bit container */ - OMAP_DSS_COLOR_ARGB16 = 1 << 5, /* ARGB16 */ - OMAP_DSS_COLOR_RGB16 = 1 << 6, /* RGB16 */ - OMAP_DSS_COLOR_RGB24U = 1 << 7, /* RGB24, 32-bit container */ - OMAP_DSS_COLOR_RGB24P = 1 << 8, /* RGB24, 24-bit container */ - OMAP_DSS_COLOR_YUV2 = 1 << 9, /* YUV2 4:2:2 co-sited */ - OMAP_DSS_COLOR_UYVY = 1 << 10, /* UYVY 4:2:2 co-sited */ - OMAP_DSS_COLOR_ARGB32 = 1 << 11, /* ARGB32 */ - OMAP_DSS_COLOR_RGBA32 = 1 << 12, /* RGBA32 */ - OMAP_DSS_COLOR_RGBX32 = 1 << 13, /* RGBx32 */ -}; - -enum omap_lcd_display_type { - OMAP_DSS_LCD_DISPLAY_STN, - OMAP_DSS_LCD_DISPLAY_TFT, -}; - -enum omap_dss_load_mode { - OMAP_DSS_LOAD_CLUT_AND_FRAME = 0, - OMAP_DSS_LOAD_CLUT_ONLY = 1, - OMAP_DSS_LOAD_FRAME_ONLY = 2, - OMAP_DSS_LOAD_CLUT_ONCE_FRAME = 3, -}; - -enum omap_dss_trans_key_type { - OMAP_DSS_COLOR_KEY_GFX_DST = 0, - OMAP_DSS_COLOR_KEY_VID_SRC = 1, -}; - -enum omap_rfbi_te_mode { - OMAP_DSS_RFBI_TE_MODE_1 = 1, - OMAP_DSS_RFBI_TE_MODE_2 = 2, -}; - -enum omap_panel_config { - OMAP_DSS_LCD_IVS = 1<<0, - OMAP_DSS_LCD_IHS = 1<<1, - OMAP_DSS_LCD_IPC = 1<<2, - OMAP_DSS_LCD_IEO = 1<<3, - OMAP_DSS_LCD_RF = 1<<4, - OMAP_DSS_LCD_ONOFF = 1<<5, - - OMAP_DSS_LCD_TFT = 1<<20, -}; - -enum omap_dss_venc_type { - OMAP_DSS_VENC_TYPE_COMPOSITE, - OMAP_DSS_VENC_TYPE_SVIDEO, -}; - -enum omap_display_caps { - OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE = 1 << 0, - OMAP_DSS_DISPLAY_CAP_TEAR_ELIM = 1 << 1, -}; - -enum omap_dss_update_mode { - OMAP_DSS_UPDATE_DISABLED = 0, - OMAP_DSS_UPDATE_AUTO, - OMAP_DSS_UPDATE_MANUAL, -}; - -enum omap_dss_display_state { - OMAP_DSS_DISPLAY_DISABLED = 0, - OMAP_DSS_DISPLAY_ACTIVE, - OMAP_DSS_DISPLAY_SUSPENDED, -}; - -/* XXX perhaps this should be removed */ -enum omap_dss_overlay_managers { - OMAP_DSS_OVL_MGR_LCD, - OMAP_DSS_OVL_MGR_TV, - OMAP_DSS_OVL_MGR_LCD2, -}; - -enum omap_dss_rotation_type { - OMAP_DSS_ROT_DMA = 0, - OMAP_DSS_ROT_VRFB = 1, -}; - -/* clockwise rotation angle */ -enum omap_dss_rotation_angle { - OMAP_DSS_ROT_0 = 0, - OMAP_DSS_ROT_90 = 1, - OMAP_DSS_ROT_180 = 2, - OMAP_DSS_ROT_270 = 3, -}; - -enum omap_overlay_caps { - OMAP_DSS_OVL_CAP_SCALE = 1 << 0, - OMAP_DSS_OVL_CAP_DISPC = 1 << 1, -}; - -enum omap_overlay_manager_caps { - OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0, -}; - -/* RFBI */ - -struct rfbi_timings { - int cs_on_time; - int cs_off_time; - int we_on_time; - int we_off_time; - int re_on_time; - int re_off_time; - int we_cycle_time; - int re_cycle_time; - int cs_pulse_width; - int access_time; - - int clk_div; - - u32 tim[5]; /* set by rfbi_convert_timings() */ - - int converted; -}; - -void omap_rfbi_write_command(const void *buf, u32 len); -void omap_rfbi_read_data(void *buf, u32 len); -void omap_rfbi_write_data(const void *buf, u32 len); -void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, - u16 x, u16 y, - u16 w, u16 h); -int omap_rfbi_enable_te(bool enable, unsigned line); -int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode, - unsigned hs_pulse_time, unsigned vs_pulse_time, - int hs_pol_inv, int vs_pol_inv, int extif_div); - -/* DSI */ -void dsi_bus_lock(void); -void dsi_bus_unlock(void); -int dsi_vc_dcs_write(int channel, u8 *data, int len); -int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd); -int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param); -int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len); -int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen); -int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data); -int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2); -int dsi_vc_set_max_rx_packet_size(int channel, u16 len); -int dsi_vc_send_null(int channel); -int dsi_vc_send_bta_sync(int channel); - -/* Board specific data */ -struct omap_dss_board_info { - int (*get_last_off_on_transaction_id)(struct device *dev); - int num_devices; - struct omap_dss_device **devices; - struct omap_dss_device *default_device; -}; - -#if defined(CONFIG_OMAP2_DSS_MODULE) || defined(CONFIG_OMAP2_DSS) -/* Init with the board info */ -extern int omap_display_init(struct omap_dss_board_info *board_data); -#else -static inline int omap_display_init(struct omap_dss_board_info *board_data) -{ - return 0; -} -#endif - -struct omap_display_platform_data { - struct omap_dss_board_info *board_data; - /* TODO: Additional members to be added when PM is considered */ - - bool (*opt_clock_available)(const char *clk_role); -}; - -struct omap_video_timings { - /* Unit: pixels */ - u16 x_res; - /* Unit: pixels */ - u16 y_res; - /* Unit: KHz */ - u32 pixel_clock; - /* Unit: pixel clocks */ - u16 hsw; /* Horizontal synchronization pulse width */ - /* Unit: pixel clocks */ - u16 hfp; /* Horizontal front porch */ - /* Unit: pixel clocks */ - u16 hbp; /* Horizontal back porch */ - /* Unit: line clocks */ - u16 vsw; /* Vertical synchronization pulse width */ - /* Unit: line clocks */ - u16 vfp; /* Vertical front porch */ - /* Unit: line clocks */ - u16 vbp; /* Vertical back porch */ -}; - -#ifdef CONFIG_OMAP2_DSS_VENC -/* Hardcoded timings for tv modes. Venc only uses these to - * identify the mode, and does not actually use the configs - * itself. However, the configs should be something that - * a normal monitor can also show */ -extern const struct omap_video_timings omap_dss_pal_timings; -extern const struct omap_video_timings omap_dss_ntsc_timings; -#endif - -struct omap_overlay_info { - bool enabled; - - u32 paddr; - void __iomem *vaddr; - u16 screen_width; - u16 width; - u16 height; - enum omap_color_mode color_mode; - u8 rotation; - enum omap_dss_rotation_type rotation_type; - bool mirror; - - u16 pos_x; - u16 pos_y; - u16 out_width; /* if 0, out_width == width */ - u16 out_height; /* if 0, out_height == height */ - u8 global_alpha; - u8 pre_mult_alpha; -}; - -struct omap_overlay { - struct kobject kobj; - struct list_head list; - - /* static fields */ - const char *name; - int id; - enum omap_color_mode supported_modes; - enum omap_overlay_caps caps; - - /* dynamic fields */ - struct omap_overlay_manager *manager; - struct omap_overlay_info info; - - /* if true, info has been changed, but not applied() yet */ - bool info_dirty; - - int (*set_manager)(struct omap_overlay *ovl, - struct omap_overlay_manager *mgr); - int (*unset_manager)(struct omap_overlay *ovl); - - int (*set_overlay_info)(struct omap_overlay *ovl, - struct omap_overlay_info *info); - void (*get_overlay_info)(struct omap_overlay *ovl, - struct omap_overlay_info *info); - - int (*wait_for_go)(struct omap_overlay *ovl); -}; - -struct omap_overlay_manager_info { - u32 default_color; - - enum omap_dss_trans_key_type trans_key_type; - u32 trans_key; - bool trans_enabled; - - bool alpha_enabled; -}; - -struct omap_overlay_manager { - struct kobject kobj; - struct list_head list; - - /* static fields */ - const char *name; - int id; - enum omap_overlay_manager_caps caps; - int num_overlays; - struct omap_overlay **overlays; - enum omap_display_type supported_displays; - - /* dynamic fields */ - struct omap_dss_device *device; - struct omap_overlay_manager_info info; - - bool device_changed; - /* if true, info has been changed but not applied() yet */ - bool info_dirty; - - int (*set_device)(struct omap_overlay_manager *mgr, - struct omap_dss_device *dssdev); - int (*unset_device)(struct omap_overlay_manager *mgr); - - int (*set_manager_info)(struct omap_overlay_manager *mgr, - struct omap_overlay_manager_info *info); - void (*get_manager_info)(struct omap_overlay_manager *mgr, - struct omap_overlay_manager_info *info); - - int (*apply)(struct omap_overlay_manager *mgr); - int (*wait_for_go)(struct omap_overlay_manager *mgr); - int (*wait_for_vsync)(struct omap_overlay_manager *mgr); - - int (*enable)(struct omap_overlay_manager *mgr); - int (*disable)(struct omap_overlay_manager *mgr); -}; - -struct omap_dss_device { - struct device dev; - - enum omap_display_type type; - - enum omap_channel channel; - - union { - struct { - u8 data_lines; - } dpi; - - struct { - u8 channel; - u8 data_lines; - } rfbi; - - struct { - u8 datapairs; - } sdi; - - struct { - u8 clk_lane; - u8 clk_pol; - u8 data1_lane; - u8 data1_pol; - u8 data2_lane; - u8 data2_pol; - - struct { - u16 regn; - u16 regm; - u16 regm_dispc; - u16 regm_dsi; - - u16 lp_clk_div; - - u16 lck_div; - u16 pck_div; - } div; - - bool ext_te; - u8 ext_te_gpio; - } dsi; - - struct { - enum omap_dss_venc_type type; - bool invert_polarity; - } venc; - } phy; - - struct { - struct omap_video_timings timings; - - int acbi; /* ac-bias pin transitions per interrupt */ - /* Unit: line clocks */ - int acb; /* ac-bias pin frequency */ - - enum omap_panel_config config; - } panel; - - struct { - u8 pixel_size; - struct rfbi_timings rfbi_timings; - } ctrl; - - int reset_gpio; - - int max_backlight_level; - - const char *name; - - /* used to match device to driver */ - const char *driver_name; - - void *data; - - struct omap_dss_driver *driver; - - /* helper variable for driver suspend/resume */ - bool activate_after_resume; - - enum omap_display_caps caps; - - struct omap_overlay_manager *manager; - - enum omap_dss_display_state state; - - /* platform specific */ - int (*platform_enable)(struct omap_dss_device *dssdev); - void (*platform_disable)(struct omap_dss_device *dssdev); - int (*set_backlight)(struct omap_dss_device *dssdev, int level); - int (*get_backlight)(struct omap_dss_device *dssdev); -}; - -struct omap_dss_driver { - struct device_driver driver; - - int (*probe)(struct omap_dss_device *); - void (*remove)(struct omap_dss_device *); - - int (*enable)(struct omap_dss_device *display); - void (*disable)(struct omap_dss_device *display); - int (*suspend)(struct omap_dss_device *display); - int (*resume)(struct omap_dss_device *display); - int (*run_test)(struct omap_dss_device *display, int test); - - int (*set_update_mode)(struct omap_dss_device *dssdev, - enum omap_dss_update_mode); - enum omap_dss_update_mode (*get_update_mode)( - struct omap_dss_device *dssdev); - - int (*update)(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h); - int (*sync)(struct omap_dss_device *dssdev); - - int (*enable_te)(struct omap_dss_device *dssdev, bool enable); - int (*get_te)(struct omap_dss_device *dssdev); - - u8 (*get_rotate)(struct omap_dss_device *dssdev); - int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate); - - bool (*get_mirror)(struct omap_dss_device *dssdev); - int (*set_mirror)(struct omap_dss_device *dssdev, bool enable); - - int (*memory_read)(struct omap_dss_device *dssdev, - void *buf, size_t size, - u16 x, u16 y, u16 w, u16 h); - - void (*get_resolution)(struct omap_dss_device *dssdev, - u16 *xres, u16 *yres); - int (*get_recommended_bpp)(struct omap_dss_device *dssdev); - - int (*check_timings)(struct omap_dss_device *dssdev, - struct omap_video_timings *timings); - void (*set_timings)(struct omap_dss_device *dssdev, - struct omap_video_timings *timings); - void (*get_timings)(struct omap_dss_device *dssdev, - struct omap_video_timings *timings); - - int (*set_wss)(struct omap_dss_device *dssdev, u32 wss); - u32 (*get_wss)(struct omap_dss_device *dssdev); -}; - -int omap_dss_register_driver(struct omap_dss_driver *); -void omap_dss_unregister_driver(struct omap_dss_driver *); - -int omap_dss_register_device(struct omap_dss_device *); -void omap_dss_unregister_device(struct omap_dss_device *); - -void omap_dss_get_device(struct omap_dss_device *dssdev); -void omap_dss_put_device(struct omap_dss_device *dssdev); -#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL) -struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from); -struct omap_dss_device *omap_dss_find_device(void *data, - int (*match)(struct omap_dss_device *dssdev, void *data)); - -int omap_dss_start_device(struct omap_dss_device *dssdev); -void omap_dss_stop_device(struct omap_dss_device *dssdev); - -int omap_dss_get_num_overlay_managers(void); -struct omap_overlay_manager *omap_dss_get_overlay_manager(int num); - -int omap_dss_get_num_overlays(void); -struct omap_overlay *omap_dss_get_overlay(int num); - -void omapdss_default_get_resolution(struct omap_dss_device *dssdev, - u16 *xres, u16 *yres); -int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev); - -typedef void (*omap_dispc_isr_t) (void *arg, u32 mask); -int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask); -int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask); - -int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout); -int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask, - unsigned long timeout); - -#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver) -#define to_dss_device(x) container_of((x), struct omap_dss_device, dev) - -void omapdss_dsi_vc_enable_hs(int channel, bool enable); -int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable); - -int omap_dsi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h, - bool enlarge_update_area); -int omap_dsi_update(struct omap_dss_device *dssdev, - int channel, - u16 x, u16 y, u16 w, u16 h, - void (*callback)(int, void *), void *data); -int omap_dsi_request_vc(struct omap_dss_device *dssdev, int *channel); -int omap_dsi_set_vc_id(struct omap_dss_device *dssdev, int channel, int vc_id); -void omap_dsi_release_vc(struct omap_dss_device *dssdev, int channel); - -int omapdss_dsi_display_enable(struct omap_dss_device *dssdev); -void omapdss_dsi_display_disable(struct omap_dss_device *dssdev); - -int omapdss_dpi_display_enable(struct omap_dss_device *dssdev); -void omapdss_dpi_display_disable(struct omap_dss_device *dssdev); -void dpi_set_timings(struct omap_dss_device *dssdev, - struct omap_video_timings *timings); -int dpi_check_timings(struct omap_dss_device *dssdev, - struct omap_video_timings *timings); - -int omapdss_sdi_display_enable(struct omap_dss_device *dssdev); -void omapdss_sdi_display_disable(struct omap_dss_device *dssdev); - -int omapdss_rfbi_display_enable(struct omap_dss_device *dssdev); -void omapdss_rfbi_display_disable(struct omap_dss_device *dssdev); -int omap_rfbi_prepare_update(struct omap_dss_device *dssdev, - u16 *x, u16 *y, u16 *w, u16 *h); -int omap_rfbi_update(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h, - void (*callback)(void *), void *data); - -#endif diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h index 872de0bf1e6b..ea6c9c88c725 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -14,14 +14,14 @@ #ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ struct omap_smsc911x_platform_data { + int id; int cs; int gpio_irq; int gpio_reset; u32 flags; }; -#if defined(CONFIG_SMSC911X) || \ - defined(CONFIG_SMSC911X_MODULE) +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); diff --git a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h b/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h deleted file mode 100644 index 01ab6572ccbb..000000000000 --- a/arch/arm/plat-omap/include/plat/nokia-dsi-panel.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H -#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H - -#include "display.h" - -/** - * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration - * @name: panel name - * @use_ext_te: use external TE - * @ext_te_gpio: external TE GPIO - * @use_esd_check: perform ESD checks - * @max_backlight_level: maximum backlight level - * @set_backlight: pointer to backlight set function - * @get_backlight: pointer to backlight get function - */ -struct nokia_dsi_panel_data { - const char *name; - - int reset_gpio; - - bool use_ext_te; - int ext_te_gpio; - - bool use_esd_check; - - int max_backlight_level; - int (*set_backlight)(struct omap_dss_device *dssdev, int level); - int (*get_backlight)(struct omap_dss_device *dssdev); -}; - -#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */ diff --git a/arch/arm/plat-omap/include/plat/panel-generic-dpi.h b/arch/arm/plat-omap/include/plat/panel-generic-dpi.h deleted file mode 100644 index 790619734bcd..000000000000 --- a/arch/arm/plat-omap/include/plat/panel-generic-dpi.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Header for generic DPI panel driver - * - * Copyright (C) 2010 Canonical Ltd. - * Author: Bryan Wu <bryan.wu@canonical.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H -#define __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H - -#include "display.h" - -/** - * struct panel_generic_dpi_data - panel driver configuration data - * @name: panel name - * @platform_enable: platform specific panel enable function - * @platform_disable: platform specific panel disable function - */ -struct panel_generic_dpi_data { - const char *name; - int (*platform_enable)(struct omap_dss_device *dssdev); - void (*platform_disable)(struct omap_dss_device *dssdev); -}; - -#endif /* __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 565d2664f5a7..ac4b60d9aa29 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,7 +129,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP1(3, sx1); /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap2evm); DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 02b96c8f6a17..17d3c939775c 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -113,7 +113,7 @@ extern int omap4430_phy_suspend(struct device *dev, int suspend); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); -extern void am35x_musb_set_mode(u8 musb_mode); +extern void am35x_set_mode(u8 musb_mode); /* * FIXME correct answer depends on hmc_mode, diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index a7314d44b17b..2798c2d4a1cf 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -25,8 +25,6 @@ #include <asm/setup.h> #include <asm/sections.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_data; struct page *empty_zero_page; diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 8addb1220b4f..a18180f2d007 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -24,11 +24,13 @@ config BLACKFIN select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_IDE + select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP if RAMKERNEL select HAVE_KERNEL_BZIP2 if RAMKERNEL select HAVE_KERNEL_LZMA if RAMKERNEL select HAVE_KERNEL_LZO if RAMKERNEL select HAVE_OPROFILE + select HAVE_PERF_EVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_GENERIC_HARDIRQS select GENERIC_ATOMIC64 diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index 2641731f24cd..e2a3d4c8ab9a 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -9,15 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - - This option will slow down process creation somewhat. - config DEBUG_VERBOSE bool "Verbose fault messages" default y @@ -32,7 +23,7 @@ config DEBUG_VERBOSE Most people should say N here. config DEBUG_MMRS - bool "Generate Blackfin MMR tree" + tristate "Generate Blackfin MMR tree" select DEBUG_FS help Create a tree of Blackfin MMRs via the debugfs tree. If diff --git a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig index 95cf2ba9de17..8465b3e6b862 100644 --- a/arch/blackfin/configs/BF527-EZKIT-V2_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT-V2_defconfig @@ -121,13 +121,11 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set # CONFIG_LOGO_BLACKFIN_VGA16 is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SOC=m -CONFIG_SND_BF5XX_I2S=m -CONFIG_SND_BF5XX_SOC_SSM2602=m -CONFIG_SND_BF5XX_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_BF5XX_I2S=y +CONFIG_SND_BF5XX_SOC_SSM2602=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 8be8e33fac52..5e7321b26040 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -96,7 +96,7 @@ CONFIG_SERIAL_BFIN_UART1=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=m -CONFIG_I2C_BLACKFIN_TWI=m +CONFIG_I2C_BLACKFIN_TWI=y CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 CONFIG_SPI=y CONFIG_SPI_BFIN=y @@ -115,13 +115,11 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set # CONFIG_LOGO_LINUX_CLUT224 is not set # CONFIG_LOGO_BLACKFIN_VGA16 is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SOC=m -CONFIG_SND_BF5XX_I2S=m -CONFIG_SND_BF5XX_SOC_SSM2602=m -CONFIG_SND_BF5XX_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_BF5XX_I2S=y +CONFIG_SND_BF5XX_SOC_SSM2602=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 0aafde6c8c2d..b90d3792ed52 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -99,8 +99,6 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_SOC=m CONFIG_SND_BF5XX_I2S=m CONFIG_SND_BF5XX_SOC_AD73311=m -CONFIG_SND_BF5XX_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_BFIN=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index c9077fb58135..005362537a7b 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -110,8 +110,6 @@ CONFIG_SND_PCM_OSS=m CONFIG_SND_SOC=m CONFIG_SND_BF5XX_I2S=m CONFIG_SND_BF5XX_SOC_AD73311=m -CONFIG_SND_BF5XX_AC97=m -CONFIG_SND_BF5XX_SOC_AD1980=m # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_BFIN=y diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 121cc04d877d..17bcbf60bcae 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -49,16 +49,6 @@ extern void dump_bfin_trace_buffer(void); #define dump_bfin_trace_buffer() #endif -/* init functions only */ -extern int init_arch_irq(void); -extern void init_exception_vectors(void); -extern void program_IAR(void); - -extern asmlinkage void lower_to_irq14(void); -extern asmlinkage void bfin_return_from_exception(void); -extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); -extern int bfin_internal_set_wake(unsigned int irq, unsigned int state); - extern void *l1_data_A_sram_alloc(size_t); extern void *l1_data_B_sram_alloc(size_t); extern void *l1_inst_sram_alloc(size_t); diff --git a/arch/blackfin/include/asm/bfin_pfmon.h b/arch/blackfin/include/asm/bfin_pfmon.h new file mode 100644 index 000000000000..accd47e2db40 --- /dev/null +++ b/arch/blackfin/include/asm/bfin_pfmon.h @@ -0,0 +1,44 @@ +/* + * Blackfin Performance Monitor definitions + * + * Copyright 2005-2011 Analog Devices Inc. + * + * Licensed under the ADI BSD license or GPL-2 (or later). + */ + +#ifndef __ASM_BFIN_PFMON_H__ +#define __ASM_BFIN_PFMON_H__ + +/* PFCTL Masks */ +#define PFMON_MASK 0xff +#define PFCEN_MASK 0x3 +#define PFCEN_DISABLE 0x0 +#define PFCEN_ENABLE_USER 0x1 +#define PFCEN_ENABLE_SUPV 0x2 +#define PFCEN_ENABLE_ALL (PFCEN_ENABLE_USER | PFCEN_ENABLE_SUPV) + +#define PFPWR_P 0 +#define PEMUSW0_P 2 +#define PFCEN0_P 3 +#define PFMON0_P 5 +#define PEMUSW1_P 13 +#define PFCEN1_P 14 +#define PFMON1_P 16 +#define PFCNT0_P 24 +#define PFCNT1_P 25 + +#define PFPWR (1 << PFPWR_P) +#define PEMUSW(n, x) ((x) << ((n) ? PEMUSW1_P : PEMUSW0_P)) +#define PEMUSW0 PEMUSW(0, 1) +#define PEMUSW1 PEMUSW(1, 1) +#define PFCEN(n, x) ((x) << ((n) ? PFCEN1_P : PFCEN0_P)) +#define PFCEN0 PFCEN(0, PFCEN_MASK) +#define PFCEN1 PFCEN(1, PFCEN_MASK) +#define PFCNT(n, x) ((x) << ((n) ? PFCNT1_P : PFCNT0_P)) +#define PFCNT0 PFCNT(0, 1) +#define PFCNT1 PFCNT(1, 1) +#define PFMON(n, x) ((x) << ((n) ? PFMON1_P : PFMON0_P)) +#define PFMON0 PFMON(0, PFMON_MASK) +#define PFMON1 PFMON(1, PFMON_MASK) + +#endif diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index d27600c262c2..f8568a31d0ab 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -100,6 +100,10 @@ struct sport_register { }; #undef __BFP +struct bfin_snd_platform_data { + const unsigned short *pin_req; +}; + #define bfin_read_sport_rx32(base) \ ({ \ struct sport_register *__mmrs = (void *)base; \ diff --git a/arch/blackfin/include/asm/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h index 77135b62818e..9a5b2c572ebf 100644 --- a/arch/blackfin/include/asm/cacheflush.h +++ b/arch/blackfin/include/asm/cacheflush.h @@ -39,8 +39,13 @@ extern void blackfin_invalidate_entire_icache(void); static inline void flush_icache_range(unsigned start, unsigned end) { -#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK) - blackfin_dcache_flush_range(start, end); +#if defined(CONFIG_BFIN_EXTMEM_WRITEBACK) + if (end <= physical_mem_end) + blackfin_dcache_flush_range(start, end); +#endif +#if defined(CONFIG_BFIN_L2_WRITEBACK) + if (start >= L2_START && end <= L2_START + L2_LENGTH) + blackfin_dcache_flush_range(start, end); #endif /* Make sure all write buffers in the data side of the core @@ -52,9 +57,17 @@ static inline void flush_icache_range(unsigned start, unsigned end) * the pipeline. */ SSYNC(); -#if defined(CONFIG_BFIN_ICACHE) - blackfin_icache_flush_range(start, end); - flush_icache_range_others(start, end); +#if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) + if (end <= physical_mem_end) { + blackfin_icache_flush_range(start, end); + flush_icache_range_others(start, end); + } +#endif +#if defined(CONFIG_BFIN_L2_ICACHEABLE) + if (start >= L2_START && end <= L2_START + L2_LENGTH) { + blackfin_icache_flush_range(start, end); + flush_icache_range_others(start, end); + } #endif } diff --git a/arch/blackfin/include/asm/cpu.h b/arch/blackfin/include/asm/cpu.h index 16883e582e3c..05043786da21 100644 --- a/arch/blackfin/include/asm/cpu.h +++ b/arch/blackfin/include/asm/cpu.h @@ -10,11 +10,8 @@ #include <linux/percpu.h> -struct task_struct; - struct blackfin_cpudata { struct cpu cpu; - struct task_struct *idle; unsigned int imemctl; unsigned int dmemctl; }; diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index 7600fe0696af..823679011457 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -52,10 +52,10 @@ #define bfin_read(addr) \ ({ \ - sizeof(*(addr)) == 1 ? bfin_read8(addr) : \ - sizeof(*(addr)) == 2 ? bfin_read16(addr) : \ - sizeof(*(addr)) == 4 ? bfin_read32(addr) : \ - ({ BUG(); 0; }); \ + sizeof(*(addr)) == 1 ? bfin_read8(addr) : \ + sizeof(*(addr)) == 2 ? bfin_read16(addr) : \ + sizeof(*(addr)) == 4 ? bfin_read32(addr) : \ + ({ BUG(); 0; }); \ }) #define bfin_write(addr, val) \ do { \ @@ -69,13 +69,13 @@ do { \ #define bfin_write_or(addr, bits) \ do { \ - void *__addr = (void *)(addr); \ + typeof(addr) __addr = (addr); \ bfin_write(__addr, bfin_read(__addr) | (bits)); \ } while (0) #define bfin_write_and(addr, bits) \ do { \ - void *__addr = (void *)(addr); \ + typeof(addr) __addr = (addr); \ bfin_write(__addr, bfin_read(__addr) & (bits)); \ } while (0) diff --git a/arch/blackfin/include/asm/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h index 7fbe42307b9a..ee73f79aef10 100644 --- a/arch/blackfin/include/asm/irq_handler.h +++ b/arch/blackfin/include/asm/irq_handler.h @@ -10,6 +10,16 @@ #include <linux/types.h> #include <linux/linkage.h> +/* init functions only */ +extern int __init init_arch_irq(void); +extern void init_exception_vectors(void); +extern void __init program_IAR(void); +#ifdef init_mach_irq +extern void __init init_mach_irq(void); +#else +# define init_mach_irq() +#endif + /* BASE LEVEL interrupt handler routines */ asmlinkage void evt_exception(void); asmlinkage void trap(void); @@ -37,4 +47,19 @@ extern void return_from_exception(void); extern int bfin_request_exception(unsigned int exception, void (*handler)(void)); extern int bfin_free_exception(unsigned int exception, void (*handler)(void)); +extern asmlinkage void lower_to_irq14(void); +extern asmlinkage void bfin_return_from_exception(void); +extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); +extern int bfin_internal_set_wake(unsigned int irq, unsigned int state); + +struct irq_data; +extern void bfin_handle_irq(unsigned irq); +extern void bfin_ack_noop(struct irq_data *); +extern void bfin_internal_mask_irq(unsigned int irq); +extern void bfin_internal_unmask_irq(unsigned int irq); + +struct irq_desc; +extern void bfin_demux_mac_status_irq(unsigned int, struct irq_desc *); +extern void bfin_demux_gpio_irq(unsigned int, struct irq_desc *); + #endif diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 8651afe12990..3ac0c72e9fee 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -103,7 +103,11 @@ static inline void arch_kgdb_breakpoint(void) asm("EXCPT 2;"); } #define BREAK_INSTR_SIZE 2 -#define CACHE_FLUSH_IS_SAFE 1 +#ifdef CONFIG_SMP +# define CACHE_FLUSH_IS_SAFE 0 +#else +# define CACHE_FLUSH_IS_SAFE 1 +#endif #define HW_INST_WATCHPOINT_NUM 6 #define HW_WATCHPOINT_NUM 8 #define TYPE_INST_WATCHPOINT 0 diff --git a/arch/blackfin/include/asm/perf_event.h b/arch/blackfin/include/asm/perf_event.h new file mode 100644 index 000000000000..3d2b1716322f --- /dev/null +++ b/arch/blackfin/include/asm/perf_event.h @@ -0,0 +1 @@ +#define MAX_HWEVENTS 2 diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index 832d7c009a2c..1066d63e62b5 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -108,8 +108,6 @@ struct pt_regs { extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) -extern void user_enable_single_step(struct task_struct *child); -extern void user_disable_single_step(struct task_struct *child); /* common code demands this function */ #define ptrace_disable(child) user_disable_single_step(child) diff --git a/arch/blackfin/include/mach-common/irq.h b/arch/blackfin/include/mach-common/irq.h new file mode 100644 index 000000000000..cab14e911dc2 --- /dev/null +++ b/arch/blackfin/include/mach-common/irq.h @@ -0,0 +1,57 @@ +/* + * Common Blackfin IRQ definitions (i.e. the CEC) + * + * Copyright 2005-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#ifndef _MACH_COMMON_IRQ_H_ +#define _MACH_COMMON_IRQ_H_ + +/* + * Core events interrupt source definitions + * + * Event Source Event Name + * Emulation EMU 0 (highest priority) + * Reset RST 1 + * NMI NMI 2 + * Exception EVX 3 + * Reserved -- 4 + * Hardware Error IVHW 5 + * Core Timer IVTMR 6 + * Peripherals IVG7 7 + * Peripherals IVG8 8 + * Peripherals IVG9 9 + * Peripherals IVG10 10 + * Peripherals IVG11 11 + * Peripherals IVG12 12 + * Peripherals IVG13 13 + * Softirq IVG14 14 + * System Call IVG15 15 (lowest priority) + */ + +/* The ABSTRACT IRQ definitions */ +#define IRQ_EMU 0 /* Emulation */ +#define IRQ_RST 1 /* reset */ +#define IRQ_NMI 2 /* Non Maskable */ +#define IRQ_EVX 3 /* Exception */ +#define IRQ_UNUSED 4 /* - unused interrupt */ +#define IRQ_HWERR 5 /* Hardware Error */ +#define IRQ_CORETMR 6 /* Core timer */ + +#define BFIN_IRQ(x) ((x) + 7) + +#define IVG7 7 +#define IVG8 8 +#define IVG9 9 +#define IVG10 10 +#define IVG11 11 +#define IVG12 12 +#define IVG13 13 +#define IVG14 14 +#define IVG15 15 + +#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) + +#endif diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index ca5ccc777772..d550b24d9e9b 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -33,7 +33,10 @@ obj-$(CONFIG_EARLY_PRINTK) += shadow_console.o obj-$(CONFIG_STACKTRACE) += stacktrace.o obj-$(CONFIG_DEBUG_VERBOSE) += trace.o obj-$(CONFIG_BFIN_PSEUDODBG_INSNS) += pseudodbg.o +obj-$(CONFIG_PERF_EVENTS) += perf_event.o # the kgdb test puts code into L2 and without linker # relaxation, we need to force long calls to/from it CFLAGS_kgdb_test.o := -mlong-calls -O0 + +obj-$(CONFIG_DEBUG_MMRS) += debug-mmrs.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 6ce8dce753c9..71dbaa4a48af 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -36,6 +36,11 @@ static int __init blackfin_dma_init(void) printk(KERN_INFO "Blackfin DMA Controller\n"); + +#if ANOMALY_05000480 + bfin_write_DMAC_TC_PER(0x0111); +#endif + for (i = 0; i < MAX_DMA_CHANNELS; i++) { atomic_set(&dma_ch[i].chan_status, 0); dma_ch[i].regs = dma_io_base_addr[i]; diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 170cf90735ba..bcf8cf6fe412 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -10,10 +10,12 @@ #include <linux/module.h> #include <linux/err.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <asm/blackfin.h> #include <asm/gpio.h> #include <asm/portmux.h> #include <linux/irq.h> +#include <asm/irq_handler.h> #if ANOMALY_05000311 || ANOMALY_05000323 enum { @@ -534,7 +536,7 @@ static const unsigned int sic_iwr_irqs[] = { #if defined(BF533_FAMILY) IRQ_PROG_INTB #elif defined(BF537_FAMILY) - IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX + IRQ_PF_INTB_WATCH, IRQ_PORTG_INTB, IRQ_PH_INTB_MAC_TX #elif defined(BF538_FAMILY) IRQ_PORTF_INTB #elif defined(CONFIG_BF52x) || defined(CONFIG_BF51x) @@ -1203,35 +1205,43 @@ void bfin_reset_boot_spi_cs(unsigned short pin) } #if defined(CONFIG_PROC_FS) -static int gpio_proc_read(char *buf, char **start, off_t offset, - int len, int *unused_i, void *unused_v) +static int gpio_proc_show(struct seq_file *m, void *v) { - int c, irq, gpio, outlen = 0; + int c, irq, gpio; for (c = 0; c < MAX_RESOURCES; c++) { irq = is_reserved(gpio_irq, c, 1); gpio = is_reserved(gpio, c, 1); if (!check_gpio(c) && (gpio || irq)) - len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, + seq_printf(m, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, get_label(c), (gpio && irq) ? " *" : "", get_gpio_dir(c) ? "OUTPUT" : "INPUT"); else if (is_reserved(peri, c, 1)) - len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); + seq_printf(m, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); else continue; - buf += len; - outlen += len; } - return outlen; + + return 0; } +static int gpio_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, gpio_proc_show, NULL); +} + +static const struct file_operations gpio_proc_ops = { + .open = gpio_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static __init int gpio_register_proc(void) { struct proc_dir_entry *proc_gpio; - proc_gpio = create_proc_entry("gpio", S_IRUGO, NULL); - if (proc_gpio) - proc_gpio->read_proc = gpio_proc_read; + proc_gpio = proc_create("gpio", S_IRUGO, NULL, &gpio_proc_ops); return proc_gpio != NULL; } __initcall(gpio_register_proc); diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 2c264b51566a..c446591b961d 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c @@ -11,6 +11,7 @@ #include <asm/cacheflush.h> #include <asm/io.h> +#include <asm/irq_handler.h> /* Allow people to have their own Blackfin exception handler in a module */ EXPORT_SYMBOL(bfin_return_from_exception); diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c new file mode 100644 index 000000000000..94b1d8a0256a --- /dev/null +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -0,0 +1,1860 @@ +/* + * debugfs interface to core/system MMRs + * + * Copyright 2007-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <linux/debugfs.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/blackfin.h> +#include <asm/gpio.h> +#include <asm/bfin_can.h> +#include <asm/bfin_dma.h> +#include <asm/bfin_ppi.h> +#include <asm/bfin_serial.h> +#include <asm/bfin5xx_spi.h> +#include <asm/bfin_twi.h> + +/* Common code defines PORT_MUX on us, so redirect the MMR back locally */ +#ifdef BFIN_PORT_MUX +#undef PORT_MUX +#define PORT_MUX BFIN_PORT_MUX +#endif + +#define _d(name, bits, addr, perms) debugfs_create_x##bits(name, perms, parent, (u##bits *)addr) +#define d(name, bits, addr) _d(name, bits, addr, S_IRUSR|S_IWUSR) +#define d_RO(name, bits, addr) _d(name, bits, addr, S_IRUSR) +#define d_WO(name, bits, addr) _d(name, bits, addr, S_IWUSR) + +#define D_RO(name, bits) d_RO(#name, bits, name) +#define D_WO(name, bits) d_WO(#name, bits, name) +#define D32(name) d(#name, 32, name) +#define D16(name) d(#name, 16, name) + +#define REGS_OFF(peri, mmr) offsetof(struct bfin_##peri##_regs, mmr) +#define __REGS(peri, sname, rname) \ + do { \ + struct bfin_##peri##_regs r; \ + void *addr = (void *)(base + REGS_OFF(peri, rname)); \ + strcpy(_buf, sname); \ + if (sizeof(r.rname) == 2) \ + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, addr); \ + else \ + debugfs_create_x32(buf, S_IRUSR|S_IWUSR, parent, addr); \ + } while (0) +#define REGS_STR_PFX(buf, pfx, num) \ + ({ \ + buf + (num >= 0 ? \ + sprintf(buf, #pfx "%i_", num) : \ + sprintf(buf, #pfx "_")); \ + }) +#define REGS_STR_PFX_C(buf, pfx, num) \ + ({ \ + buf + (num >= 0 ? \ + sprintf(buf, #pfx "%c_", 'A' + num) : \ + sprintf(buf, #pfx "_")); \ + }) + +/* + * Core registers (not memory mapped) + */ +extern u32 last_seqstat; + +static int debug_cclk_get(void *data, u64 *val) +{ + *val = get_cclk(); + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_debug_cclk, debug_cclk_get, NULL, "0x%08llx\n"); + +static int debug_sclk_get(void *data, u64 *val) +{ + *val = get_sclk(); + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_debug_sclk, debug_sclk_get, NULL, "0x%08llx\n"); + +#define DEFINE_SYSREG(sr, pre, post) \ +static int sysreg_##sr##_get(void *data, u64 *val) \ +{ \ + unsigned long tmp; \ + pre; \ + __asm__ __volatile__("%0 = " #sr ";" : "=d"(tmp)); \ + *val = tmp; \ + return 0; \ +} \ +static int sysreg_##sr##_set(void *data, u64 val) \ +{ \ + unsigned long tmp = val; \ + __asm__ __volatile__(#sr " = %0;" : : "d"(tmp)); \ + post; \ + return 0; \ +} \ +DEFINE_SIMPLE_ATTRIBUTE(fops_sysreg_##sr, sysreg_##sr##_get, sysreg_##sr##_set, "0x%08llx\n") + +DEFINE_SYSREG(cycles, , ); +DEFINE_SYSREG(cycles2, __asm__ __volatile__("%0 = cycles;" : "=d"(tmp)), ); +DEFINE_SYSREG(emudat, , ); +DEFINE_SYSREG(seqstat, , ); +DEFINE_SYSREG(syscfg, , CSYNC()); +#define D_SYSREG(sr) debugfs_create_file(#sr, S_IRUSR|S_IWUSR, parent, NULL, &fops_sysreg_##sr) + +/* + * CAN + */ +#define CAN_OFF(mmr) REGS_OFF(can, mmr) +#define __CAN(uname, lname) __REGS(can, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_can(struct dentry *parent, unsigned long base, int num) +{ + static struct dentry *am, *mb; + int i, j; + char buf[32], *_buf = REGS_STR_PFX(buf, CAN, num); + + if (!am) { + am = debugfs_create_dir("am", parent); + mb = debugfs_create_dir("mb", parent); + } + + __CAN(MC1, mc1); + __CAN(MD1, md1); + __CAN(TRS1, trs1); + __CAN(TRR1, trr1); + __CAN(TA1, ta1); + __CAN(AA1, aa1); + __CAN(RMP1, rmp1); + __CAN(RML1, rml1); + __CAN(MBTIF1, mbtif1); + __CAN(MBRIF1, mbrif1); + __CAN(MBIM1, mbim1); + __CAN(RFH1, rfh1); + __CAN(OPSS1, opss1); + + __CAN(MC2, mc2); + __CAN(MD2, md2); + __CAN(TRS2, trs2); + __CAN(TRR2, trr2); + __CAN(TA2, ta2); + __CAN(AA2, aa2); + __CAN(RMP2, rmp2); + __CAN(RML2, rml2); + __CAN(MBTIF2, mbtif2); + __CAN(MBRIF2, mbrif2); + __CAN(MBIM2, mbim2); + __CAN(RFH2, rfh2); + __CAN(OPSS2, opss2); + + __CAN(CLOCK, clock); + __CAN(TIMING, timing); + __CAN(DEBUG, debug); + __CAN(STATUS, status); + __CAN(CEC, cec); + __CAN(GIS, gis); + __CAN(GIM, gim); + __CAN(GIF, gif); + __CAN(CONTROL, control); + __CAN(INTR, intr); + __CAN(VERSION, version); + __CAN(MBTD, mbtd); + __CAN(EWR, ewr); + __CAN(ESR, esr); + /*__CAN(UCREG, ucreg); no longer exists */ + __CAN(UCCNT, uccnt); + __CAN(UCRC, ucrc); + __CAN(UCCNF, uccnf); + __CAN(VERSION2, version2); + + for (i = 0; i < 32; ++i) { + sprintf(_buf, "AM%02iL", i); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, am, + (u16 *)(base + CAN_OFF(msk[i].aml))); + sprintf(_buf, "AM%02iH", i); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, am, + (u16 *)(base + CAN_OFF(msk[i].amh))); + + for (j = 0; j < 3; ++j) { + sprintf(_buf, "MB%02i_DATA%i", i, j); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb, + (u16 *)(base + CAN_OFF(chl[i].data[j*2]))); + } + sprintf(_buf, "MB%02i_LENGTH", i); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb, + (u16 *)(base + CAN_OFF(chl[i].dlc))); + sprintf(_buf, "MB%02i_TIMESTAMP", i); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb, + (u16 *)(base + CAN_OFF(chl[i].tsv))); + sprintf(_buf, "MB%02i_ID0", i); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb, + (u16 *)(base + CAN_OFF(chl[i].id0))); + sprintf(_buf, "MB%02i_ID1", i); + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, mb, + (u16 *)(base + CAN_OFF(chl[i].id1))); + } +} +#define CAN(num) bfin_debug_mmrs_can(parent, CAN##num##_MC1, num) + +/* + * DMA + */ +#define __DMA(uname, lname) __REGS(dma, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdma, const char *pfx) +{ + char buf[32], *_buf; + + if (mdma) + _buf = buf + sprintf(buf, "%s_%c%i_", pfx, mdma, num); + else + _buf = buf + sprintf(buf, "%s%i_", pfx, num); + + __DMA(NEXT_DESC_PTR, next_desc_ptr); + __DMA(START_ADDR, start_addr); + __DMA(CONFIG, config); + __DMA(X_COUNT, x_count); + __DMA(X_MODIFY, x_modify); + __DMA(Y_COUNT, y_count); + __DMA(Y_MODIFY, y_modify); + __DMA(CURR_DESC_PTR, curr_desc_ptr); + __DMA(CURR_ADDR, curr_addr); + __DMA(IRQ_STATUS, irq_status); + __DMA(PERIPHERAL_MAP, peripheral_map); + __DMA(CURR_X_COUNT, curr_x_count); + __DMA(CURR_Y_COUNT, curr_y_count); +} +#define _DMA(num, base, mdma, pfx) bfin_debug_mmrs_dma(parent, base, num, mdma, pfx "DMA") +#define DMA(num) _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "") +#define _MDMA(num, x) \ + do { \ + _DMA(num, x##DMA_D##num##_CONFIG, 'D', #x); \ + _DMA(num, x##DMA_S##num##_CONFIG, 'S', #x); \ + } while (0) +#define MDMA(num) _MDMA(num, M) +#define IMDMA(num) _MDMA(num, IM) + +/* + * EPPI + */ +#define __EPPI(uname, lname) __REGS(eppi, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_eppi(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, EPPI, num); + __EPPI(STATUS, status); + __EPPI(HCOUNT, hcount); + __EPPI(HDELAY, hdelay); + __EPPI(VCOUNT, vcount); + __EPPI(VDELAY, vdelay); + __EPPI(FRAME, frame); + __EPPI(LINE, line); + __EPPI(CLKDIV, clkdiv); + __EPPI(CONTROL, control); + __EPPI(FS1W_HBL, fs1w_hbl); + __EPPI(FS1P_AVPL, fs1p_avpl); + __EPPI(FS2W_LVB, fs2w_lvb); + __EPPI(FS2P_LAVF, fs2p_lavf); + __EPPI(CLIP, clip); +} +#define EPPI(num) bfin_debug_mmrs_eppi(parent, EPPI##num##_STATUS, num) + +/* + * General Purpose Timers + */ +#define GPTIMER_OFF(mmr) (TIMER0_##mmr - TIMER0_CONFIG) +#define __GPTIMER(name) \ + do { \ + strcpy(_buf, #name); \ + debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, (u16 *)(base + GPTIMER_OFF(name))); \ + } while (0) +static void __init __maybe_unused +bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num); + __GPTIMER(CONFIG); + __GPTIMER(COUNTER); + __GPTIMER(PERIOD); + __GPTIMER(WIDTH); +} +#define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num) + +/* + * Handshake MDMA + */ +#define __HMDMA(uname, lname) __REGS(hmdma, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_hmdma(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, HMDMA, num); + __HMDMA(CONTROL, control); + __HMDMA(ECINIT, ecinit); + __HMDMA(BCINIT, bcinit); + __HMDMA(ECURGENT, ecurgent); + __HMDMA(ECOVERFLOW, ecoverflow); + __HMDMA(ECOUNT, ecount); + __HMDMA(BCOUNT, bcount); +} +#define HMDMA(num) bfin_debug_mmrs_hmdma(parent, HMDMA##num##_CONTROL, num) + +/* + * Port/GPIO + */ +#define bfin_gpio_regs gpio_port_t +#define __PORT(uname, lname) __REGS(gpio, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_port(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf; +#ifdef __ADSPBF54x__ + _buf = REGS_STR_PFX_C(buf, PORT, num); + __PORT(FER, port_fer); + __PORT(SET, data_set); + __PORT(CLEAR, data_clear); + __PORT(DIR_SET, dir_set); + __PORT(DIR_CLEAR, dir_clear); + __PORT(INEN, inen); + __PORT(MUX, port_mux); +#else + _buf = buf + sprintf(buf, "PORT%cIO_", num); + __PORT(CLEAR, data_clear); + __PORT(SET, data_set); + __PORT(TOGGLE, toggle); + __PORT(MASKA, maska); + __PORT(MASKA_CLEAR, maska_clear); + __PORT(MASKA_SET, maska_set); + __PORT(MASKA_TOGGLE, maska_toggle); + __PORT(MASKB, maskb); + __PORT(MASKB_CLEAR, maskb_clear); + __PORT(MASKB_SET, maskb_set); + __PORT(MASKB_TOGGLE, maskb_toggle); + __PORT(DIR, dir); + __PORT(POLAR, polar); + __PORT(EDGE, edge); + __PORT(BOTH, both); + __PORT(INEN, inen); +#endif + _buf[-1] = '\0'; + d(buf, 16, base + REGS_OFF(gpio, data)); +} +#define PORT(base, num) bfin_debug_mmrs_port(parent, base, num) + +/* + * PPI + */ +#define __PPI(uname, lname) __REGS(ppi, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_ppi(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, PPI, num); + __PPI(CONTROL, control); + __PPI(STATUS, status); + __PPI(COUNT, count); + __PPI(DELAY, delay); + __PPI(FRAME, frame); +} +#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_STATUS, num) + +/* + * SPI + */ +#define __SPI(uname, lname) __REGS(spi, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_spi(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, SPI, num); + __SPI(CTL, ctl); + __SPI(FLG, flg); + __SPI(STAT, stat); + __SPI(TDBR, tdbr); + __SPI(RDBR, rdbr); + __SPI(BAUD, baud); + __SPI(SHADOW, shadow); +} +#define SPI(num) bfin_debug_mmrs_spi(parent, SPI##num##_REGBASE, num) + +/* + * SPORT + */ +static inline int sport_width(void *mmr) +{ + unsigned long lmmr = (unsigned long)mmr; + if ((lmmr & 0xff) == 0x10) + /* SPORT#_TX has 0x10 offset -> SPORT#_TCR2 has 0x04 offset */ + lmmr -= 0xc; + else + /* SPORT#_RX has 0x18 offset -> SPORT#_RCR2 has 0x24 offset */ + lmmr += 0xc; + /* extract SLEN field from control register 2 and add 1 */ + return (bfin_read16(lmmr) & 0x1f) + 1; +} +static int sport_set(void *mmr, u64 val) +{ + unsigned long flags; + local_irq_save(flags); + if (sport_width(mmr) <= 16) + bfin_write16(mmr, val); + else + bfin_write32(mmr, val); + local_irq_restore(flags); + return 0; +} +static int sport_get(void *mmr, u64 *val) +{ + unsigned long flags; + local_irq_save(flags); + if (sport_width(mmr) <= 16) + *val = bfin_read16(mmr); + else + *val = bfin_read32(mmr); + local_irq_restore(flags); + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(fops_sport, sport_get, sport_set, "0x%08llx\n"); +/*DEFINE_SIMPLE_ATTRIBUTE(fops_sport_ro, sport_get, NULL, "0x%08llx\n");*/ +DEFINE_SIMPLE_ATTRIBUTE(fops_sport_wo, NULL, sport_set, "0x%08llx\n"); +#define SPORT_OFF(mmr) (SPORT0_##mmr - SPORT0_TCR1) +#define _D_SPORT(name, perms, fops) \ + do { \ + strcpy(_buf, #name); \ + debugfs_create_file(buf, perms, parent, (void *)(base + SPORT_OFF(name)), fops); \ + } while (0) +#define __SPORT_RW(name) _D_SPORT(name, S_IRUSR|S_IWUSR, &fops_sport) +#define __SPORT_RO(name) _D_SPORT(name, S_IRUSR, &fops_sport_ro) +#define __SPORT_WO(name) _D_SPORT(name, S_IWUSR, &fops_sport_wo) +#define __SPORT(name, bits) \ + do { \ + strcpy(_buf, #name); \ + debugfs_create_x##bits(buf, S_IRUSR|S_IWUSR, parent, (u##bits *)(base + SPORT_OFF(name))); \ + } while (0) +static void __init __maybe_unused +bfin_debug_mmrs_sport(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, SPORT, num); + __SPORT(CHNL, 16); + __SPORT(MCMC1, 16); + __SPORT(MCMC2, 16); + __SPORT(MRCS0, 32); + __SPORT(MRCS1, 32); + __SPORT(MRCS2, 32); + __SPORT(MRCS3, 32); + __SPORT(MTCS0, 32); + __SPORT(MTCS1, 32); + __SPORT(MTCS2, 32); + __SPORT(MTCS3, 32); + __SPORT(RCLKDIV, 16); + __SPORT(RCR1, 16); + __SPORT(RCR2, 16); + __SPORT(RFSDIV, 16); + __SPORT_RW(RX); + __SPORT(STAT, 16); + __SPORT(TCLKDIV, 16); + __SPORT(TCR1, 16); + __SPORT(TCR2, 16); + __SPORT(TFSDIV, 16); + __SPORT_WO(TX); +} +#define SPORT(num) bfin_debug_mmrs_sport(parent, SPORT##num##_TCR1, num) + +/* + * TWI + */ +#define __TWI(uname, lname) __REGS(twi, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_twi(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, TWI, num); + __TWI(CLKDIV, clkdiv); + __TWI(CONTROL, control); + __TWI(SLAVE_CTL, slave_ctl); + __TWI(SLAVE_STAT, slave_stat); + __TWI(SLAVE_ADDR, slave_addr); + __TWI(MASTER_CTL, master_ctl); + __TWI(MASTER_STAT, master_stat); + __TWI(MASTER_ADDR, master_addr); + __TWI(INT_STAT, int_stat); + __TWI(INT_MASK, int_mask); + __TWI(FIFO_CTL, fifo_ctl); + __TWI(FIFO_STAT, fifo_stat); + __TWI(XMT_DATA8, xmt_data8); + __TWI(XMT_DATA16, xmt_data16); + __TWI(RCV_DATA8, rcv_data8); + __TWI(RCV_DATA16, rcv_data16); +} +#define TWI(num) bfin_debug_mmrs_twi(parent, TWI##num##_CLKDIV, num) + +/* + * UART + */ +#define __UART(uname, lname) __REGS(uart, #uname, lname) +static void __init __maybe_unused +bfin_debug_mmrs_uart(struct dentry *parent, unsigned long base, int num) +{ + char buf[32], *_buf = REGS_STR_PFX(buf, UART, num); +#ifdef BFIN_UART_BF54X_STYLE + __UART(DLL, dll); + __UART(DLH, dlh); + __UART(GCTL, gctl); + __UART(LCR, lcr); + __UART(MCR, mcr); + __UART(LSR, lsr); + __UART(MSR, msr); + __UART(SCR, scr); + __UART(IER_SET, ier_set); + __UART(IER_CLEAR, ier_clear); + __UART(THR, thr); + __UART(RBR, rbr); +#else + __UART(DLL, dll); + __UART(THR, thr); + __UART(RBR, rbr); + __UART(DLH, dlh); + __UART(IER, ier); + __UART(IIR, iir); + __UART(LCR, lcr); + __UART(MCR, mcr); + __UART(LSR, lsr); + __UART(MSR, msr); + __UART(SCR, scr); + __UART(GCTL, gctl); +#endif +} +#define UART(num) bfin_debug_mmrs_uart(parent, UART##num##_DLL, num) + +/* + * The actual debugfs generation + */ +static struct dentry *debug_mmrs_dentry; + +static int __init bfin_debug_mmrs_init(void) +{ + struct dentry *top, *parent; + + pr_info("debug-mmrs: setting up Blackfin MMR debugfs\n"); + + top = debugfs_create_dir("blackfin", NULL); + if (top == NULL) + return -1; + + parent = debugfs_create_dir("core_regs", top); + debugfs_create_file("cclk", S_IRUSR, parent, NULL, &fops_debug_cclk); + debugfs_create_file("sclk", S_IRUSR, parent, NULL, &fops_debug_sclk); + debugfs_create_x32("last_seqstat", S_IRUSR, parent, &last_seqstat); + D_SYSREG(cycles); + D_SYSREG(cycles2); + D_SYSREG(emudat); + D_SYSREG(seqstat); + D_SYSREG(syscfg); + + /* Core MMRs */ + parent = debugfs_create_dir("ctimer", top); + D32(TCNTL); + D32(TCOUNT); + D32(TPERIOD); + D32(TSCALE); + + parent = debugfs_create_dir("cec", top); + D32(EVT0); + D32(EVT1); + D32(EVT2); + D32(EVT3); + D32(EVT4); + D32(EVT5); + D32(EVT6); + D32(EVT7); + D32(EVT8); + D32(EVT9); + D32(EVT10); + D32(EVT11); + D32(EVT12); + D32(EVT13); + D32(EVT14); + D32(EVT15); + D32(EVT_OVERRIDE); + D32(IMASK); + D32(IPEND); + D32(ILAT); + D32(IPRIO); + + parent = debugfs_create_dir("debug", top); + D32(DBGSTAT); + D32(DSPID); + + parent = debugfs_create_dir("mmu", top); + D32(SRAM_BASE_ADDRESS); + D32(DCPLB_ADDR0); + D32(DCPLB_ADDR10); + D32(DCPLB_ADDR11); + D32(DCPLB_ADDR12); + D32(DCPLB_ADDR13); + D32(DCPLB_ADDR14); + D32(DCPLB_ADDR15); + D32(DCPLB_ADDR1); + D32(DCPLB_ADDR2); + D32(DCPLB_ADDR3); + D32(DCPLB_ADDR4); + D32(DCPLB_ADDR5); + D32(DCPLB_ADDR6); + D32(DCPLB_ADDR7); + D32(DCPLB_ADDR8); + D32(DCPLB_ADDR9); + D32(DCPLB_DATA0); + D32(DCPLB_DATA10); + D32(DCPLB_DATA11); + D32(DCPLB_DATA12); + D32(DCPLB_DATA13); + D32(DCPLB_DATA14); + D32(DCPLB_DATA15); + D32(DCPLB_DATA1); + D32(DCPLB_DATA2); + D32(DCPLB_DATA3); + D32(DCPLB_DATA4); + D32(DCPLB_DATA5); + D32(DCPLB_DATA6); + D32(DCPLB_DATA7); + D32(DCPLB_DATA8); + D32(DCPLB_DATA9); + D32(DCPLB_FAULT_ADDR); + D32(DCPLB_STATUS); + D32(DMEM_CONTROL); + D32(DTEST_COMMAND); + D32(DTEST_DATA0); + D32(DTEST_DATA1); + + D32(ICPLB_ADDR0); + D32(ICPLB_ADDR1); + D32(ICPLB_ADDR2); + D32(ICPLB_ADDR3); + D32(ICPLB_ADDR4); + D32(ICPLB_ADDR5); + D32(ICPLB_ADDR6); + D32(ICPLB_ADDR7); + D32(ICPLB_ADDR8); + D32(ICPLB_ADDR9); + D32(ICPLB_ADDR10); + D32(ICPLB_ADDR11); + D32(ICPLB_ADDR12); + D32(ICPLB_ADDR13); + D32(ICPLB_ADDR14); + D32(ICPLB_ADDR15); + D32(ICPLB_DATA0); + D32(ICPLB_DATA1); + D32(ICPLB_DATA2); + D32(ICPLB_DATA3); + D32(ICPLB_DATA4); + D32(ICPLB_DATA5); + D32(ICPLB_DATA6); + D32(ICPLB_DATA7); + D32(ICPLB_DATA8); + D32(ICPLB_DATA9); + D32(ICPLB_DATA10); + D32(ICPLB_DATA11); + D32(ICPLB_DATA12); + D32(ICPLB_DATA13); + D32(ICPLB_DATA14); + D32(ICPLB_DATA15); + D32(ICPLB_FAULT_ADDR); + D32(ICPLB_STATUS); + D32(IMEM_CONTROL); + if (!ANOMALY_05000481) { + D32(ITEST_COMMAND); + D32(ITEST_DATA0); + D32(ITEST_DATA1); + } + + parent = debugfs_create_dir("perf", top); + D32(PFCNTR0); + D32(PFCNTR1); + D32(PFCTL); + + parent = debugfs_create_dir("trace", top); + D32(TBUF); + D32(TBUFCTL); + D32(TBUFSTAT); + + parent = debugfs_create_dir("watchpoint", top); + D32(WPIACTL); + D32(WPIA0); + D32(WPIA1); + D32(WPIA2); + D32(WPIA3); + D32(WPIA4); + D32(WPIA5); + D32(WPIACNT0); + D32(WPIACNT1); + D32(WPIACNT2); + D32(WPIACNT3); + D32(WPIACNT4); + D32(WPIACNT5); + D32(WPDACTL); + D32(WPDA0); + D32(WPDA1); + D32(WPDACNT0); + D32(WPDACNT1); + D32(WPSTAT); + + /* System MMRs */ +#ifdef ATAPI_CONTROL + parent = debugfs_create_dir("atapi", top); + D16(ATAPI_CONTROL); + D16(ATAPI_DEV_ADDR); + D16(ATAPI_DEV_RXBUF); + D16(ATAPI_DEV_TXBUF); + D16(ATAPI_DMA_TFRCNT); + D16(ATAPI_INT_MASK); + D16(ATAPI_INT_STATUS); + D16(ATAPI_LINE_STATUS); + D16(ATAPI_MULTI_TIM_0); + D16(ATAPI_MULTI_TIM_1); + D16(ATAPI_MULTI_TIM_2); + D16(ATAPI_PIO_TFRCNT); + D16(ATAPI_PIO_TIM_0); + D16(ATAPI_PIO_TIM_1); + D16(ATAPI_REG_TIM_0); + D16(ATAPI_SM_STATE); + D16(ATAPI_STATUS); + D16(ATAPI_TERMINATE); + D16(ATAPI_UDMAOUT_TFRCNT); + D16(ATAPI_ULTRA_TIM_0); + D16(ATAPI_ULTRA_TIM_1); + D16(ATAPI_ULTRA_TIM_2); + D16(ATAPI_ULTRA_TIM_3); + D16(ATAPI_UMAIN_TFRCNT); + D16(ATAPI_XFER_LEN); +#endif + +#if defined(CAN_MC1) || defined(CAN0_MC1) || defined(CAN1_MC1) + parent = debugfs_create_dir("can", top); +# ifdef CAN_MC1 + bfin_debug_mmrs_can(parent, CAN_MC1, -1); +# endif +# ifdef CAN0_MC1 + CAN(0); +# endif +# ifdef CAN1_MC1 + CAN(1); +# endif +#endif + +#ifdef CNT_COMMAND + parent = debugfs_create_dir("counter", top); + D16(CNT_COMMAND); + D16(CNT_CONFIG); + D32(CNT_COUNTER); + D16(CNT_DEBOUNCE); + D16(CNT_IMASK); + D32(CNT_MAX); + D32(CNT_MIN); + D16(CNT_STATUS); +#endif + + parent = debugfs_create_dir("dmac", top); +#ifdef DMA_TC_CNT + D16(DMAC_TC_CNT); + D16(DMAC_TC_PER); +#endif +#ifdef DMAC0_TC_CNT + D16(DMAC0_TC_CNT); + D16(DMAC0_TC_PER); +#endif +#ifdef DMAC1_TC_CNT + D16(DMAC1_TC_CNT); + D16(DMAC1_TC_PER); +#endif +#ifdef DMAC1_PERIMUX + D16(DMAC1_PERIMUX); +#endif + +#ifdef __ADSPBF561__ + /* XXX: should rewrite the MMR map */ +# define DMA0_NEXT_DESC_PTR DMA2_0_NEXT_DESC_PTR +# define DMA1_NEXT_DESC_PTR DMA2_1_NEXT_DESC_PTR +# define DMA2_NEXT_DESC_PTR DMA2_2_NEXT_DESC_PTR +# define DMA3_NEXT_DESC_PTR DMA2_3_NEXT_DESC_PTR +# define DMA4_NEXT_DESC_PTR DMA2_4_NEXT_DESC_PTR +# define DMA5_NEXT_DESC_PTR DMA2_5_NEXT_DESC_PTR +# define DMA6_NEXT_DESC_PTR DMA2_6_NEXT_DESC_PTR +# define DMA7_NEXT_DESC_PTR DMA2_7_NEXT_DESC_PTR +# define DMA8_NEXT_DESC_PTR DMA2_8_NEXT_DESC_PTR +# define DMA9_NEXT_DESC_PTR DMA2_9_NEXT_DESC_PTR +# define DMA10_NEXT_DESC_PTR DMA2_10_NEXT_DESC_PTR +# define DMA11_NEXT_DESC_PTR DMA2_11_NEXT_DESC_PTR +# define DMA12_NEXT_DESC_PTR DMA1_0_NEXT_DESC_PTR +# define DMA13_NEXT_DESC_PTR DMA1_1_NEXT_DESC_PTR +# define DMA14_NEXT_DESC_PTR DMA1_2_NEXT_DESC_PTR +# define DMA15_NEXT_DESC_PTR DMA1_3_NEXT_DESC_PTR +# define DMA16_NEXT_DESC_PTR DMA1_4_NEXT_DESC_PTR +# define DMA17_NEXT_DESC_PTR DMA1_5_NEXT_DESC_PTR +# define DMA18_NEXT_DESC_PTR DMA1_6_NEXT_DESC_PTR +# define DMA19_NEXT_DESC_PTR DMA1_7_NEXT_DESC_PTR +# define DMA20_NEXT_DESC_PTR DMA1_8_NEXT_DESC_PTR +# define DMA21_NEXT_DESC_PTR DMA1_9_NEXT_DESC_PTR +# define DMA22_NEXT_DESC_PTR DMA1_10_NEXT_DESC_PTR +# define DMA23_NEXT_DESC_PTR DMA1_11_NEXT_DESC_PTR +#endif + parent = debugfs_create_dir("dma", top); + DMA(0); + DMA(1); + DMA(1); + DMA(2); + DMA(3); + DMA(4); + DMA(5); + DMA(6); + DMA(7); +#ifdef DMA8_NEXT_DESC_PTR + DMA(8); + DMA(9); + DMA(10); + DMA(11); +#endif +#ifdef DMA12_NEXT_DESC_PTR + DMA(12); + DMA(13); + DMA(14); + DMA(15); + DMA(16); + DMA(17); + DMA(18); + DMA(19); +#endif +#ifdef DMA20_NEXT_DESC_PTR + DMA(20); + DMA(21); + DMA(22); + DMA(23); +#endif + + parent = debugfs_create_dir("ebiu_amc", top); + D32(EBIU_AMBCTL0); + D32(EBIU_AMBCTL1); + D16(EBIU_AMGCTL); +#ifdef EBIU_MBSCTL + D16(EBIU_MBSCTL); + D32(EBIU_ARBSTAT); + D32(EBIU_MODE); + D16(EBIU_FCTL); +#endif + +#ifdef EBIU_SDGCTL + parent = debugfs_create_dir("ebiu_sdram", top); +# ifdef __ADSPBF561__ + D32(EBIU_SDBCTL); +# else + D16(EBIU_SDBCTL); +# endif + D32(EBIU_SDGCTL); + D16(EBIU_SDRRC); + D16(EBIU_SDSTAT); +#endif + +#ifdef EBIU_DDRACCT + parent = debugfs_create_dir("ebiu_ddr", top); + D32(EBIU_DDRACCT); + D32(EBIU_DDRARCT); + D32(EBIU_DDRBRC0); + D32(EBIU_DDRBRC1); + D32(EBIU_DDRBRC2); + D32(EBIU_DDRBRC3); + D32(EBIU_DDRBRC4); + D32(EBIU_DDRBRC5); + D32(EBIU_DDRBRC6); + D32(EBIU_DDRBRC7); + D32(EBIU_DDRBWC0); + D32(EBIU_DDRBWC1); + D32(EBIU_DDRBWC2); + D32(EBIU_DDRBWC3); + D32(EBIU_DDRBWC4); + D32(EBIU_DDRBWC5); + D32(EBIU_DDRBWC6); + D32(EBIU_DDRBWC7); + D32(EBIU_DDRCTL0); + D32(EBIU_DDRCTL1); + D32(EBIU_DDRCTL2); + D32(EBIU_DDRCTL3); + D32(EBIU_DDRGC0); + D32(EBIU_DDRGC1); + D32(EBIU_DDRGC2); + D32(EBIU_DDRGC3); + D32(EBIU_DDRMCCL); + D32(EBIU_DDRMCEN); + D32(EBIU_DDRQUE); + D32(EBIU_DDRTACT); + D32(EBIU_ERRADD); + D16(EBIU_ERRMST); + D16(EBIU_RSTCTL); +#endif + +#ifdef EMAC_ADDRHI + parent = debugfs_create_dir("emac", top); + D32(EMAC_ADDRHI); + D32(EMAC_ADDRLO); + D32(EMAC_FLC); + D32(EMAC_HASHHI); + D32(EMAC_HASHLO); + D32(EMAC_MMC_CTL); + D32(EMAC_MMC_RIRQE); + D32(EMAC_MMC_RIRQS); + D32(EMAC_MMC_TIRQE); + D32(EMAC_MMC_TIRQS); + D32(EMAC_OPMODE); + D32(EMAC_RXC_ALIGN); + D32(EMAC_RXC_ALLFRM); + D32(EMAC_RXC_ALLOCT); + D32(EMAC_RXC_BROAD); + D32(EMAC_RXC_DMAOVF); + D32(EMAC_RXC_EQ64); + D32(EMAC_RXC_FCS); + D32(EMAC_RXC_GE1024); + D32(EMAC_RXC_LNERRI); + D32(EMAC_RXC_LNERRO); + D32(EMAC_RXC_LONG); + D32(EMAC_RXC_LT1024); + D32(EMAC_RXC_LT128); + D32(EMAC_RXC_LT256); + D32(EMAC_RXC_LT512); + D32(EMAC_RXC_MACCTL); + D32(EMAC_RXC_MULTI); + D32(EMAC_RXC_OCTET); + D32(EMAC_RXC_OK); + D32(EMAC_RXC_OPCODE); + D32(EMAC_RXC_PAUSE); + D32(EMAC_RXC_SHORT); + D32(EMAC_RXC_TYPED); + D32(EMAC_RXC_UNICST); + D32(EMAC_RX_IRQE); + D32(EMAC_RX_STAT); + D32(EMAC_RX_STKY); + D32(EMAC_STAADD); + D32(EMAC_STADAT); + D32(EMAC_SYSCTL); + D32(EMAC_SYSTAT); + D32(EMAC_TXC_1COL); + D32(EMAC_TXC_ABORT); + D32(EMAC_TXC_ALLFRM); + D32(EMAC_TXC_ALLOCT); + D32(EMAC_TXC_BROAD); + D32(EMAC_TXC_CRSERR); + D32(EMAC_TXC_DEFER); + D32(EMAC_TXC_DMAUND); + D32(EMAC_TXC_EQ64); + D32(EMAC_TXC_GE1024); + D32(EMAC_TXC_GT1COL); + D32(EMAC_TXC_LATECL); + D32(EMAC_TXC_LT1024); + D32(EMAC_TXC_LT128); + D32(EMAC_TXC_LT256); + D32(EMAC_TXC_LT512); + D32(EMAC_TXC_MACCTL); + D32(EMAC_TXC_MULTI); + D32(EMAC_TXC_OCTET); + D32(EMAC_TXC_OK); + D32(EMAC_TXC_UNICST); + D32(EMAC_TXC_XS_COL); + D32(EMAC_TXC_XS_DFR); + D32(EMAC_TX_IRQE); + D32(EMAC_TX_STAT); + D32(EMAC_TX_STKY); + D32(EMAC_VLAN1); + D32(EMAC_VLAN2); + D32(EMAC_WKUP_CTL); + D32(EMAC_WKUP_FFCMD); + D32(EMAC_WKUP_FFCRC0); + D32(EMAC_WKUP_FFCRC1); + D32(EMAC_WKUP_FFMSK0); + D32(EMAC_WKUP_FFMSK1); + D32(EMAC_WKUP_FFMSK2); + D32(EMAC_WKUP_FFMSK3); + D32(EMAC_WKUP_FFOFF); +# ifdef EMAC_PTP_ACCR + D32(EMAC_PTP_ACCR); + D32(EMAC_PTP_ADDEND); + D32(EMAC_PTP_ALARMHI); + D32(EMAC_PTP_ALARMLO); + D16(EMAC_PTP_CTL); + D32(EMAC_PTP_FOFF); + D32(EMAC_PTP_FV1); + D32(EMAC_PTP_FV2); + D32(EMAC_PTP_FV3); + D16(EMAC_PTP_ID_OFF); + D32(EMAC_PTP_ID_SNAP); + D16(EMAC_PTP_IE); + D16(EMAC_PTP_ISTAT); + D32(EMAC_PTP_OFFSET); + D32(EMAC_PTP_PPS_PERIOD); + D32(EMAC_PTP_PPS_STARTHI); + D32(EMAC_PTP_PPS_STARTLO); + D32(EMAC_PTP_RXSNAPHI); + D32(EMAC_PTP_RXSNAPLO); + D32(EMAC_PTP_TIMEHI); + D32(EMAC_PTP_TIMELO); + D32(EMAC_PTP_TXSNAPHI); + D32(EMAC_PTP_TXSNAPLO); +# endif +#endif + +#if defined(EPPI0_STATUS) || defined(EPPI1_STATUS) || defined(EPPI2_STATUS) + parent = debugfs_create_dir("eppi", top); +# ifdef EPPI0_STATUS + EPPI(0); +# endif +# ifdef EPPI1_STATUS + EPPI(1); +# endif +# ifdef EPPI2_STATUS + EPPI(2); +# endif +#endif + + parent = debugfs_create_dir("gptimer", top); +#ifdef TIMER_DISABLE + D16(TIMER_DISABLE); + D16(TIMER_ENABLE); + D32(TIMER_STATUS); +#endif +#ifdef TIMER_DISABLE0 + D16(TIMER_DISABLE0); + D16(TIMER_ENABLE0); + D32(TIMER_STATUS0); +#endif +#ifdef TIMER_DISABLE1 + D16(TIMER_DISABLE1); + D16(TIMER_ENABLE1); + D32(TIMER_STATUS1); +#endif + /* XXX: Should convert BF561 MMR names */ +#ifdef TMRS4_DISABLE + D16(TMRS4_DISABLE); + D16(TMRS4_ENABLE); + D32(TMRS4_STATUS); + D16(TMRS8_DISABLE); + D16(TMRS8_ENABLE); + D32(TMRS8_STATUS); +#endif + GPTIMER(0); + GPTIMER(1); + GPTIMER(2); +#ifdef TIMER3_CONFIG + GPTIMER(3); + GPTIMER(4); + GPTIMER(5); + GPTIMER(6); + GPTIMER(7); +#endif +#ifdef TIMER8_CONFIG + GPTIMER(8); + GPTIMER(9); + GPTIMER(10); +#endif +#ifdef TIMER11_CONFIG + GPTIMER(11); +#endif + +#ifdef HMDMA0_CONTROL + parent = debugfs_create_dir("hmdma", top); + HMDMA(0); + HMDMA(1); +#endif + +#ifdef HOST_CONTROL + parent = debugfs_create_dir("hostdp", top); + D16(HOST_CONTROL); + D16(HOST_STATUS); + D16(HOST_TIMEOUT); +#endif + +#ifdef IMDMA_S0_CONFIG + parent = debugfs_create_dir("imdma", top); + IMDMA(0); + IMDMA(1); +#endif + +#ifdef KPAD_CTL + parent = debugfs_create_dir("keypad", top); + D16(KPAD_CTL); + D16(KPAD_PRESCALE); + D16(KPAD_MSEL); + D16(KPAD_ROWCOL); + D16(KPAD_STAT); + D16(KPAD_SOFTEVAL); +#endif + + parent = debugfs_create_dir("mdma", top); + MDMA(0); + MDMA(1); +#ifdef MDMA_D2_CONFIG + MDMA(2); + MDMA(3); +#endif + +#ifdef MXVR_CONFIG + parent = debugfs_create_dir("mxvr", top); + D16(MXVR_CONFIG); +# ifdef MXVR_PLL_CTL_0 + D32(MXVR_PLL_CTL_0); +# endif + D32(MXVR_STATE_0); + D32(MXVR_STATE_1); + D32(MXVR_INT_STAT_0); + D32(MXVR_INT_STAT_1); + D32(MXVR_INT_EN_0); + D32(MXVR_INT_EN_1); + D16(MXVR_POSITION); + D16(MXVR_MAX_POSITION); + D16(MXVR_DELAY); + D16(MXVR_MAX_DELAY); + D32(MXVR_LADDR); + D16(MXVR_GADDR); + D32(MXVR_AADDR); + D32(MXVR_ALLOC_0); + D32(MXVR_ALLOC_1); + D32(MXVR_ALLOC_2); + D32(MXVR_ALLOC_3); + D32(MXVR_ALLOC_4); + D32(MXVR_ALLOC_5); + D32(MXVR_ALLOC_6); + D32(MXVR_ALLOC_7); + D32(MXVR_ALLOC_8); + D32(MXVR_ALLOC_9); + D32(MXVR_ALLOC_10); + D32(MXVR_ALLOC_11); + D32(MXVR_ALLOC_12); + D32(MXVR_ALLOC_13); + D32(MXVR_ALLOC_14); + D32(MXVR_SYNC_LCHAN_0); + D32(MXVR_SYNC_LCHAN_1); + D32(MXVR_SYNC_LCHAN_2); + D32(MXVR_SYNC_LCHAN_3); + D32(MXVR_SYNC_LCHAN_4); + D32(MXVR_SYNC_LCHAN_5); + D32(MXVR_SYNC_LCHAN_6); + D32(MXVR_SYNC_LCHAN_7); + D32(MXVR_DMA0_CONFIG); + D32(MXVR_DMA0_START_ADDR); + D16(MXVR_DMA0_COUNT); + D32(MXVR_DMA0_CURR_ADDR); + D16(MXVR_DMA0_CURR_COUNT); + D32(MXVR_DMA1_CONFIG); + D32(MXVR_DMA1_START_ADDR); + D16(MXVR_DMA1_COUNT); + D32(MXVR_DMA1_CURR_ADDR); + D16(MXVR_DMA1_CURR_COUNT); + D32(MXVR_DMA2_CONFIG); + D32(MXVR_DMA2_START_ADDR); + D16(MXVR_DMA2_COUNT); + D32(MXVR_DMA2_CURR_ADDR); + D16(MXVR_DMA2_CURR_COUNT); + D32(MXVR_DMA3_CONFIG); + D32(MXVR_DMA3_START_ADDR); + D16(MXVR_DMA3_COUNT); + D32(MXVR_DMA3_CURR_ADDR); + D16(MXVR_DMA3_CURR_COUNT); + D32(MXVR_DMA4_CONFIG); + D32(MXVR_DMA4_START_ADDR); + D16(MXVR_DMA4_COUNT); + D32(MXVR_DMA4_CURR_ADDR); + D16(MXVR_DMA4_CURR_COUNT); + D32(MXVR_DMA5_CONFIG); + D32(MXVR_DMA5_START_ADDR); + D16(MXVR_DMA5_COUNT); + D32(MXVR_DMA5_CURR_ADDR); + D16(MXVR_DMA5_CURR_COUNT); + D32(MXVR_DMA6_CONFIG); + D32(MXVR_DMA6_START_ADDR); + D16(MXVR_DMA6_COUNT); + D32(MXVR_DMA6_CURR_ADDR); + D16(MXVR_DMA6_CURR_COUNT); + D32(MXVR_DMA7_CONFIG); + D32(MXVR_DMA7_START_ADDR); + D16(MXVR_DMA7_COUNT); + D32(MXVR_DMA7_CURR_ADDR); + D16(MXVR_DMA7_CURR_COUNT); + D16(MXVR_AP_CTL); + D32(MXVR_APRB_START_ADDR); + D32(MXVR_APRB_CURR_ADDR); + D32(MXVR_APTB_START_ADDR); + D32(MXVR_APTB_CURR_ADDR); + D32(MXVR_CM_CTL); + D32(MXVR_CMRB_START_ADDR); + D32(MXVR_CMRB_CURR_ADDR); + D32(MXVR_CMTB_START_ADDR); + D32(MXVR_CMTB_CURR_ADDR); + D32(MXVR_RRDB_START_ADDR); + D32(MXVR_RRDB_CURR_ADDR); + D32(MXVR_PAT_DATA_0); + D32(MXVR_PAT_EN_0); + D32(MXVR_PAT_DATA_1); + D32(MXVR_PAT_EN_1); + D16(MXVR_FRAME_CNT_0); + D16(MXVR_FRAME_CNT_1); + D32(MXVR_ROUTING_0); + D32(MXVR_ROUTING_1); + D32(MXVR_ROUTING_2); + D32(MXVR_ROUTING_3); + D32(MXVR_ROUTING_4); + D32(MXVR_ROUTING_5); + D32(MXVR_ROUTING_6); + D32(MXVR_ROUTING_7); + D32(MXVR_ROUTING_8); + D32(MXVR_ROUTING_9); + D32(MXVR_ROUTING_10); + D32(MXVR_ROUTING_11); + D32(MXVR_ROUTING_12); + D32(MXVR_ROUTING_13); + D32(MXVR_ROUTING_14); +# ifdef MXVR_PLL_CTL_1 + D32(MXVR_PLL_CTL_1); +# endif + D16(MXVR_BLOCK_CNT); +# ifdef MXVR_CLK_CTL + D32(MXVR_CLK_CTL); +# endif +# ifdef MXVR_CDRPLL_CTL + D32(MXVR_CDRPLL_CTL); +# endif +# ifdef MXVR_FMPLL_CTL + D32(MXVR_FMPLL_CTL); +# endif +# ifdef MXVR_PIN_CTL + D16(MXVR_PIN_CTL); +# endif +# ifdef MXVR_SCLK_CNT + D16(MXVR_SCLK_CNT); +# endif +#endif + +#ifdef NFC_ADDR + parent = debugfs_create_dir("nfc", top); + D_WO(NFC_ADDR, 16); + D_WO(NFC_CMD, 16); + D_RO(NFC_COUNT, 16); + D16(NFC_CTL); + D_WO(NFC_DATA_RD, 16); + D_WO(NFC_DATA_WR, 16); + D_RO(NFC_ECC0, 16); + D_RO(NFC_ECC1, 16); + D_RO(NFC_ECC2, 16); + D_RO(NFC_ECC3, 16); + D16(NFC_IRQMASK); + D16(NFC_IRQSTAT); + D_WO(NFC_PGCTL, 16); + D_RO(NFC_READ, 16); + D16(NFC_RST); + D_RO(NFC_STAT, 16); +#endif + +#ifdef OTP_CONTROL + parent = debugfs_create_dir("otp", top); + D16(OTP_CONTROL); + D16(OTP_BEN); + D16(OTP_STATUS); + D32(OTP_TIMING); + D32(OTP_DATA0); + D32(OTP_DATA1); + D32(OTP_DATA2); + D32(OTP_DATA3); +#endif + +#ifdef PIXC_CTL + parent = debugfs_create_dir("pixc", top); + D16(PIXC_CTL); + D16(PIXC_PPL); + D16(PIXC_LPF); + D16(PIXC_AHSTART); + D16(PIXC_AHEND); + D16(PIXC_AVSTART); + D16(PIXC_AVEND); + D16(PIXC_ATRANSP); + D16(PIXC_BHSTART); + D16(PIXC_BHEND); + D16(PIXC_BVSTART); + D16(PIXC_BVEND); + D16(PIXC_BTRANSP); + D16(PIXC_INTRSTAT); + D32(PIXC_RYCON); + D32(PIXC_GUCON); + D32(PIXC_BVCON); + D32(PIXC_CCBIAS); + D32(PIXC_TC); +#endif + + parent = debugfs_create_dir("pll", top); + D16(PLL_CTL); + D16(PLL_DIV); + D16(PLL_LOCKCNT); + D16(PLL_STAT); + D16(VR_CTL); + D32(CHIPID); /* it's part of this hardware block */ + +#if defined(PPI_STATUS) || defined(PPI0_STATUS) || defined(PPI1_STATUS) + parent = debugfs_create_dir("ppi", top); +# ifdef PPI_STATUS + bfin_debug_mmrs_ppi(parent, PPI_STATUS, -1); +# endif +# ifdef PPI0_STATUS + PPI(0); +# endif +# ifdef PPI1_STATUS + PPI(1); +# endif +#endif + +#ifdef PWM_CTRL + parent = debugfs_create_dir("pwm", top); + D16(PWM_CTRL); + D16(PWM_STAT); + D16(PWM_TM); + D16(PWM_DT); + D16(PWM_GATE); + D16(PWM_CHA); + D16(PWM_CHB); + D16(PWM_CHC); + D16(PWM_SEG); + D16(PWM_SYNCWT); + D16(PWM_CHAL); + D16(PWM_CHBL); + D16(PWM_CHCL); + D16(PWM_LSI); + D16(PWM_STAT2); +#endif + +#ifdef RSI_CONFIG + parent = debugfs_create_dir("rsi", top); + D32(RSI_ARGUMENT); + D16(RSI_CEATA_CONTROL); + D16(RSI_CLK_CONTROL); + D16(RSI_COMMAND); + D16(RSI_CONFIG); + D16(RSI_DATA_CNT); + D16(RSI_DATA_CONTROL); + D16(RSI_DATA_LGTH); + D32(RSI_DATA_TIMER); + D16(RSI_EMASK); + D16(RSI_ESTAT); + D32(RSI_FIFO); + D16(RSI_FIFO_CNT); + D32(RSI_MASK0); + D32(RSI_MASK1); + D16(RSI_PID0); + D16(RSI_PID1); + D16(RSI_PID2); + D16(RSI_PID3); + D16(RSI_PWR_CONTROL); + D16(RSI_RD_WAIT_EN); + D32(RSI_RESPONSE0); + D32(RSI_RESPONSE1); + D32(RSI_RESPONSE2); + D32(RSI_RESPONSE3); + D16(RSI_RESP_CMD); + D32(RSI_STATUS); + D_WO(RSI_STATUSCL, 16); +#endif + +#ifdef RTC_ALARM + parent = debugfs_create_dir("rtc", top); + D32(RTC_ALARM); + D16(RTC_ICTL); + D16(RTC_ISTAT); + D16(RTC_PREN); + D32(RTC_STAT); + D16(RTC_SWCNT); +#endif + +#ifdef SDH_CFG + parent = debugfs_create_dir("sdh", top); + D32(SDH_ARGUMENT); + D16(SDH_CFG); + D16(SDH_CLK_CTL); + D16(SDH_COMMAND); + D_RO(SDH_DATA_CNT, 16); + D16(SDH_DATA_CTL); + D16(SDH_DATA_LGTH); + D32(SDH_DATA_TIMER); + D16(SDH_E_MASK); + D16(SDH_E_STATUS); + D32(SDH_FIFO); + D_RO(SDH_FIFO_CNT, 16); + D32(SDH_MASK0); + D32(SDH_MASK1); + D_RO(SDH_PID0, 16); + D_RO(SDH_PID1, 16); + D_RO(SDH_PID2, 16); + D_RO(SDH_PID3, 16); + D_RO(SDH_PID4, 16); + D_RO(SDH_PID5, 16); + D_RO(SDH_PID6, 16); + D_RO(SDH_PID7, 16); + D16(SDH_PWR_CTL); + D16(SDH_RD_WAIT_EN); + D_RO(SDH_RESPONSE0, 32); + D_RO(SDH_RESPONSE1, 32); + D_RO(SDH_RESPONSE2, 32); + D_RO(SDH_RESPONSE3, 32); + D_RO(SDH_RESP_CMD, 16); + D_RO(SDH_STATUS, 32); + D_WO(SDH_STATUS_CLR, 16); +#endif + +#ifdef SECURE_CONTROL + parent = debugfs_create_dir("security", top); + D16(SECURE_CONTROL); + D16(SECURE_STATUS); + D32(SECURE_SYSSWT); +#endif + + parent = debugfs_create_dir("sic", top); + D16(SWRST); + D16(SYSCR); + D16(SIC_RVECT); + D32(SIC_IAR0); + D32(SIC_IAR1); + D32(SIC_IAR2); +#ifdef SIC_IAR3 + D32(SIC_IAR3); +#endif +#ifdef SIC_IAR4 + D32(SIC_IAR4); + D32(SIC_IAR5); + D32(SIC_IAR6); +#endif +#ifdef SIC_IAR7 + D32(SIC_IAR7); +#endif +#ifdef SIC_IAR8 + D32(SIC_IAR8); + D32(SIC_IAR9); + D32(SIC_IAR10); + D32(SIC_IAR11); +#endif +#ifdef SIC_IMASK + D32(SIC_IMASK); + D32(SIC_ISR); + D32(SIC_IWR); +#endif +#ifdef SIC_IMASK0 + D32(SIC_IMASK0); + D32(SIC_IMASK1); + D32(SIC_ISR0); + D32(SIC_ISR1); + D32(SIC_IWR0); + D32(SIC_IWR1); +#endif +#ifdef SIC_IMASK2 + D32(SIC_IMASK2); + D32(SIC_ISR2); + D32(SIC_IWR2); +#endif +#ifdef SICB_RVECT + D16(SICB_SWRST); + D16(SICB_SYSCR); + D16(SICB_RVECT); + D32(SICB_IAR0); + D32(SICB_IAR1); + D32(SICB_IAR2); + D32(SICB_IAR3); + D32(SICB_IAR4); + D32(SICB_IAR5); + D32(SICB_IAR6); + D32(SICB_IAR7); + D32(SICB_IMASK0); + D32(SICB_IMASK1); + D32(SICB_ISR0); + D32(SICB_ISR1); + D32(SICB_IWR0); + D32(SICB_IWR1); +#endif + + parent = debugfs_create_dir("spi", top); +#ifdef SPI0_REGBASE + SPI(0); +#endif +#ifdef SPI1_REGBASE + SPI(1); +#endif +#ifdef SPI2_REGBASE + SPI(2); +#endif + + parent = debugfs_create_dir("sport", top); +#ifdef SPORT0_STAT + SPORT(0); +#endif +#ifdef SPORT1_STAT + SPORT(1); +#endif +#ifdef SPORT2_STAT + SPORT(2); +#endif +#ifdef SPORT3_STAT + SPORT(3); +#endif + +#if defined(TWI_CLKDIV) || defined(TWI0_CLKDIV) || defined(TWI1_CLKDIV) + parent = debugfs_create_dir("twi", top); +# ifdef TWI_CLKDIV + bfin_debug_mmrs_twi(parent, TWI_CLKDIV, -1); +# endif +# ifdef TWI0_CLKDIV + TWI(0); +# endif +# ifdef TWI1_CLKDIV + TWI(1); +# endif +#endif + + parent = debugfs_create_dir("uart", top); +#ifdef BFIN_UART_DLL + bfin_debug_mmrs_uart(parent, BFIN_UART_DLL, -1); +#endif +#ifdef UART0_DLL + UART(0); +#endif +#ifdef UART1_DLL + UART(1); +#endif +#ifdef UART2_DLL + UART(2); +#endif +#ifdef UART3_DLL + UART(3); +#endif + +#ifdef USB_FADDR + parent = debugfs_create_dir("usb", top); + D16(USB_FADDR); + D16(USB_POWER); + D16(USB_INTRTX); + D16(USB_INTRRX); + D16(USB_INTRTXE); + D16(USB_INTRRXE); + D16(USB_INTRUSB); + D16(USB_INTRUSBE); + D16(USB_FRAME); + D16(USB_INDEX); + D16(USB_TESTMODE); + D16(USB_GLOBINTR); + D16(USB_GLOBAL_CTL); + D16(USB_TX_MAX_PACKET); + D16(USB_CSR0); + D16(USB_TXCSR); + D16(USB_RX_MAX_PACKET); + D16(USB_RXCSR); + D16(USB_COUNT0); + D16(USB_RXCOUNT); + D16(USB_TXTYPE); + D16(USB_NAKLIMIT0); + D16(USB_TXINTERVAL); + D16(USB_RXTYPE); + D16(USB_RXINTERVAL); + D16(USB_TXCOUNT); + D16(USB_EP0_FIFO); + D16(USB_EP1_FIFO); + D16(USB_EP2_FIFO); + D16(USB_EP3_FIFO); + D16(USB_EP4_FIFO); + D16(USB_EP5_FIFO); + D16(USB_EP6_FIFO); + D16(USB_EP7_FIFO); + D16(USB_OTG_DEV_CTL); + D16(USB_OTG_VBUS_IRQ); + D16(USB_OTG_VBUS_MASK); + D16(USB_LINKINFO); + D16(USB_VPLEN); + D16(USB_HS_EOF1); + D16(USB_FS_EOF1); + D16(USB_LS_EOF1); + D16(USB_APHY_CNTRL); + D16(USB_APHY_CALIB); + D16(USB_APHY_CNTRL2); + D16(USB_PHY_TEST); + D16(USB_PLLOSC_CTRL); + D16(USB_SRP_CLKDIV); + D16(USB_EP_NI0_TXMAXP); + D16(USB_EP_NI0_TXCSR); + D16(USB_EP_NI0_RXMAXP); + D16(USB_EP_NI0_RXCSR); + D16(USB_EP_NI0_RXCOUNT); + D16(USB_EP_NI0_TXTYPE); + D16(USB_EP_NI0_TXINTERVAL); + D16(USB_EP_NI0_RXTYPE); + D16(USB_EP_NI0_RXINTERVAL); + D16(USB_EP_NI0_TXCOUNT); + D16(USB_EP_NI1_TXMAXP); + D16(USB_EP_NI1_TXCSR); + D16(USB_EP_NI1_RXMAXP); + D16(USB_EP_NI1_RXCSR); + D16(USB_EP_NI1_RXCOUNT); + D16(USB_EP_NI1_TXTYPE); + D16(USB_EP_NI1_TXINTERVAL); + D16(USB_EP_NI1_RXTYPE); + D16(USB_EP_NI1_RXINTERVAL); + D16(USB_EP_NI1_TXCOUNT); + D16(USB_EP_NI2_TXMAXP); + D16(USB_EP_NI2_TXCSR); + D16(USB_EP_NI2_RXMAXP); + D16(USB_EP_NI2_RXCSR); + D16(USB_EP_NI2_RXCOUNT); + D16(USB_EP_NI2_TXTYPE); + D16(USB_EP_NI2_TXINTERVAL); + D16(USB_EP_NI2_RXTYPE); + D16(USB_EP_NI2_RXINTERVAL); + D16(USB_EP_NI2_TXCOUNT); + D16(USB_EP_NI3_TXMAXP); + D16(USB_EP_NI3_TXCSR); + D16(USB_EP_NI3_RXMAXP); + D16(USB_EP_NI3_RXCSR); + D16(USB_EP_NI3_RXCOUNT); + D16(USB_EP_NI3_TXTYPE); + D16(USB_EP_NI3_TXINTERVAL); + D16(USB_EP_NI3_RXTYPE); + D16(USB_EP_NI3_RXINTERVAL); + D16(USB_EP_NI3_TXCOUNT); + D16(USB_EP_NI4_TXMAXP); + D16(USB_EP_NI4_TXCSR); + D16(USB_EP_NI4_RXMAXP); + D16(USB_EP_NI4_RXCSR); + D16(USB_EP_NI4_RXCOUNT); + D16(USB_EP_NI4_TXTYPE); + D16(USB_EP_NI4_TXINTERVAL); + D16(USB_EP_NI4_RXTYPE); + D16(USB_EP_NI4_RXINTERVAL); + D16(USB_EP_NI4_TXCOUNT); + D16(USB_EP_NI5_TXMAXP); + D16(USB_EP_NI5_TXCSR); + D16(USB_EP_NI5_RXMAXP); + D16(USB_EP_NI5_RXCSR); + D16(USB_EP_NI5_RXCOUNT); + D16(USB_EP_NI5_TXTYPE); + D16(USB_EP_NI5_TXINTERVAL); + D16(USB_EP_NI5_RXTYPE); + D16(USB_EP_NI5_RXINTERVAL); + D16(USB_EP_NI5_TXCOUNT); + D16(USB_EP_NI6_TXMAXP); + D16(USB_EP_NI6_TXCSR); + D16(USB_EP_NI6_RXMAXP); + D16(USB_EP_NI6_RXCSR); + D16(USB_EP_NI6_RXCOUNT); + D16(USB_EP_NI6_TXTYPE); + D16(USB_EP_NI6_TXINTERVAL); + D16(USB_EP_NI6_RXTYPE); + D16(USB_EP_NI6_RXINTERVAL); + D16(USB_EP_NI6_TXCOUNT); + D16(USB_EP_NI7_TXMAXP); + D16(USB_EP_NI7_TXCSR); + D16(USB_EP_NI7_RXMAXP); + D16(USB_EP_NI7_RXCSR); + D16(USB_EP_NI7_RXCOUNT); + D16(USB_EP_NI7_TXTYPE); + D16(USB_EP_NI7_TXINTERVAL); + D16(USB_EP_NI7_RXTYPE); + D16(USB_EP_NI7_RXINTERVAL); + D16(USB_EP_NI7_TXCOUNT); + D16(USB_DMA_INTERRUPT); + D16(USB_DMA0CONTROL); + D16(USB_DMA0ADDRLOW); + D16(USB_DMA0ADDRHIGH); + D16(USB_DMA0COUNTLOW); + D16(USB_DMA0COUNTHIGH); + D16(USB_DMA1CONTROL); + D16(USB_DMA1ADDRLOW); + D16(USB_DMA1ADDRHIGH); + D16(USB_DMA1COUNTLOW); + D16(USB_DMA1COUNTHIGH); + D16(USB_DMA2CONTROL); + D16(USB_DMA2ADDRLOW); + D16(USB_DMA2ADDRHIGH); + D16(USB_DMA2COUNTLOW); + D16(USB_DMA2COUNTHIGH); + D16(USB_DMA3CONTROL); + D16(USB_DMA3ADDRLOW); + D16(USB_DMA3ADDRHIGH); + D16(USB_DMA3COUNTLOW); + D16(USB_DMA3COUNTHIGH); + D16(USB_DMA4CONTROL); + D16(USB_DMA4ADDRLOW); + D16(USB_DMA4ADDRHIGH); + D16(USB_DMA4COUNTLOW); + D16(USB_DMA4COUNTHIGH); + D16(USB_DMA5CONTROL); + D16(USB_DMA5ADDRLOW); + D16(USB_DMA5ADDRHIGH); + D16(USB_DMA5COUNTLOW); + D16(USB_DMA5COUNTHIGH); + D16(USB_DMA6CONTROL); + D16(USB_DMA6ADDRLOW); + D16(USB_DMA6ADDRHIGH); + D16(USB_DMA6COUNTLOW); + D16(USB_DMA6COUNTHIGH); + D16(USB_DMA7CONTROL); + D16(USB_DMA7ADDRLOW); + D16(USB_DMA7ADDRHIGH); + D16(USB_DMA7COUNTLOW); + D16(USB_DMA7COUNTHIGH); +#endif + +#ifdef WDOG_CNT + parent = debugfs_create_dir("watchdog", top); + D32(WDOG_CNT); + D16(WDOG_CTL); + D32(WDOG_STAT); +#endif +#ifdef WDOGA_CNT + parent = debugfs_create_dir("watchdog", top); + D32(WDOGA_CNT); + D16(WDOGA_CTL); + D32(WDOGA_STAT); + D32(WDOGB_CNT); + D16(WDOGB_CTL); + D32(WDOGB_STAT); +#endif + + /* BF533 glue */ +#ifdef FIO_FLAG_D +#define PORTFIO FIO_FLAG_D +#endif + /* BF561 glue */ +#ifdef FIO0_FLAG_D +#define PORTFIO FIO0_FLAG_D +#endif +#ifdef FIO1_FLAG_D +#define PORTGIO FIO1_FLAG_D +#endif +#ifdef FIO2_FLAG_D +#define PORTHIO FIO2_FLAG_D +#endif + parent = debugfs_create_dir("port", top); +#ifdef PORTFIO + PORT(PORTFIO, 'F'); +#endif +#ifdef PORTGIO + PORT(PORTGIO, 'G'); +#endif +#ifdef PORTHIO + PORT(PORTHIO, 'H'); +#endif + +#ifdef __ADSPBF51x__ + D16(PORTF_FER); + D16(PORTF_DRIVE); + D16(PORTF_HYSTERESIS); + D16(PORTF_MUX); + + D16(PORTG_FER); + D16(PORTG_DRIVE); + D16(PORTG_HYSTERESIS); + D16(PORTG_MUX); + + D16(PORTH_FER); + D16(PORTH_DRIVE); + D16(PORTH_HYSTERESIS); + D16(PORTH_MUX); + + D16(MISCPORT_DRIVE); + D16(MISCPORT_HYSTERESIS); +#endif /* BF51x */ + +#ifdef __ADSPBF52x__ + D16(PORTF_FER); + D16(PORTF_DRIVE); + D16(PORTF_HYSTERESIS); + D16(PORTF_MUX); + D16(PORTF_SLEW); + + D16(PORTG_FER); + D16(PORTG_DRIVE); + D16(PORTG_HYSTERESIS); + D16(PORTG_MUX); + D16(PORTG_SLEW); + + D16(PORTH_FER); + D16(PORTH_DRIVE); + D16(PORTH_HYSTERESIS); + D16(PORTH_MUX); + D16(PORTH_SLEW); + + D16(MISCPORT_DRIVE); + D16(MISCPORT_HYSTERESIS); + D16(MISCPORT_SLEW); +#endif /* BF52x */ + +#ifdef BF537_FAMILY + D16(PORTF_FER); + D16(PORTG_FER); + D16(PORTH_FER); + D16(PORT_MUX); +#endif /* BF534 BF536 BF537 */ + +#ifdef BF538_FAMILY + D16(PORTCIO_FER); + D16(PORTCIO); + D16(PORTCIO_CLEAR); + D16(PORTCIO_SET); + D16(PORTCIO_TOGGLE); + D16(PORTCIO_DIR); + D16(PORTCIO_INEN); + + D16(PORTDIO); + D16(PORTDIO_CLEAR); + D16(PORTDIO_DIR); + D16(PORTDIO_FER); + D16(PORTDIO_INEN); + D16(PORTDIO_SET); + D16(PORTDIO_TOGGLE); + + D16(PORTEIO); + D16(PORTEIO_CLEAR); + D16(PORTEIO_DIR); + D16(PORTEIO_FER); + D16(PORTEIO_INEN); + D16(PORTEIO_SET); + D16(PORTEIO_TOGGLE); +#endif /* BF538 BF539 */ + +#ifdef __ADSPBF54x__ + { + int num; + unsigned long base; + char *_buf, buf[32]; + + base = PORTA_FER; + for (num = 0; num < 10; ++num) { + PORT(base, num); + base += sizeof(struct bfin_gpio_regs); + } + +#define __PINT(uname, lname) __REGS(pint, #uname, lname) + parent = debugfs_create_dir("pint", top); + base = PINT0_MASK_SET; + for (num = 0; num < 4; ++num) { + _buf = REGS_STR_PFX(buf, PINT, num); + __PINT(MASK_SET, mask_set); + __PINT(MASK_CLEAR, mask_clear); + __PINT(IRQ, irq); + __PINT(ASSIGN, assign); + __PINT(EDGE_SET, edge_set); + __PINT(EDGE_CLEAR, edge_clear); + __PINT(INVERT_SET, invert_set); + __PINT(INVERT_CLEAR, invert_clear); + __PINT(PINSTATE, pinstate); + __PINT(LATCH, latch); + base += sizeof(struct bfin_pint_regs); + } + + } +#endif /* BF54x */ + + debug_mmrs_dentry = top; + + return 0; +} +module_init(bfin_debug_mmrs_init); + +static void __exit bfin_debug_mmrs_exit(void) +{ + debugfs_remove_recursive(debug_mmrs_dentry); +} +module_exit(bfin_debug_mmrs_exit); + +MODULE_LICENSE("GPL"); diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c index f37019c847c9..486426f8a0d7 100644 --- a/arch/blackfin/kernel/ipipe.c +++ b/arch/blackfin/kernel/ipipe.c @@ -33,6 +33,7 @@ #include <linux/io.h> #include <asm/system.h> #include <asm/atomic.h> +#include <asm/irq_handler.h> DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 1696d34f51c2..ff3d747154ac 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -11,6 +11,7 @@ #include <linux/kallsyms.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <asm/irq_handler.h> #include <asm/trace.h> #include <asm/pda.h> diff --git a/arch/blackfin/kernel/nmi.c b/arch/blackfin/kernel/nmi.c index 401eb1d8e3b4..679d0db35256 100644 --- a/arch/blackfin/kernel/nmi.c +++ b/arch/blackfin/kernel/nmi.c @@ -145,16 +145,16 @@ int check_nmi_wdt_touched(void) { unsigned int this_cpu = smp_processor_id(); unsigned int cpu; + cpumask_t mask; - cpumask_t mask = cpu_online_map; - + cpumask_copy(&mask, cpu_online_mask); if (!atomic_read(&nmi_touched[this_cpu])) return 0; atomic_set(&nmi_touched[this_cpu], 0); - cpu_clear(this_cpu, mask); - for_each_cpu_mask(cpu, mask) { + cpumask_clear_cpu(this_cpu, &mask); + for_each_cpu(cpu, &mask) { invalidate_dcache_range((unsigned long)(&nmi_touched[cpu]), (unsigned long)(&nmi_touched[cpu])); if (!atomic_read(&nmi_touched[cpu])) diff --git a/arch/blackfin/kernel/perf_event.c b/arch/blackfin/kernel/perf_event.c new file mode 100644 index 000000000000..04300f29c0e7 --- /dev/null +++ b/arch/blackfin/kernel/perf_event.c @@ -0,0 +1,498 @@ +/* + * Blackfin performance counters + * + * Copyright 2011 Analog Devices Inc. + * + * Ripped from SuperH version: + * + * Copyright (C) 2009 Paul Mundt + * + * Heavily based on the x86 and PowerPC implementations. + * + * x86: + * Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de> + * Copyright (C) 2008-2009 Red Hat, Inc., Ingo Molnar + * Copyright (C) 2009 Jaswinder Singh Rajput + * Copyright (C) 2009 Advanced Micro Devices, Inc., Robert Richter + * Copyright (C) 2008-2009 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com> + * Copyright (C) 2009 Intel Corporation, <markus.t.metzger@intel.com> + * + * ppc: + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/perf_event.h> +#include <asm/bfin_pfmon.h> + +/* + * We have two counters, and each counter can support an event type. + * The 'o' is PFCNTx=1 and 's' is PFCNTx=0 + * + * 0x04 o pc invariant branches + * 0x06 o mispredicted branches + * 0x09 o predicted branches taken + * 0x0B o EXCPT insn + * 0x0C o CSYNC/SSYNC insn + * 0x0D o Insns committed + * 0x0E o Interrupts taken + * 0x0F o Misaligned address exceptions + * 0x80 o Code memory fetches stalled due to DMA + * 0x83 o 64bit insn fetches delivered + * 0x9A o data cache fills (bank a) + * 0x9B o data cache fills (bank b) + * 0x9C o data cache lines evicted (bank a) + * 0x9D o data cache lines evicted (bank b) + * 0x9E o data cache high priority fills + * 0x9F o data cache low priority fills + * 0x00 s loop 0 iterations + * 0x01 s loop 1 iterations + * 0x0A s CSYNC/SSYNC stalls + * 0x10 s DAG read/after write hazards + * 0x13 s RAW data hazards + * 0x81 s code TAG stalls + * 0x82 s code fill stalls + * 0x90 s processor to memory stalls + * 0x91 s data memory stalls not hidden by 0x90 + * 0x92 s data store buffer full stalls + * 0x93 s data memory write buffer full stalls due to high->low priority + * 0x95 s data memory fill buffer stalls + * 0x96 s data TAG collision stalls + * 0x97 s data collision stalls + * 0x98 s data stalls + * 0x99 s data stalls sent to processor + */ + +static const int event_map[] = { + /* use CYCLES cpu register */ + [PERF_COUNT_HW_CPU_CYCLES] = -1, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x0D, + [PERF_COUNT_HW_CACHE_REFERENCES] = -1, + [PERF_COUNT_HW_CACHE_MISSES] = 0x83, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x09, + [PERF_COUNT_HW_BRANCH_MISSES] = 0x06, + [PERF_COUNT_HW_BUS_CYCLES] = -1, +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +static const int cache_events[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = +{ + [C(L1D)] = { /* Data bank A */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS) ] = 0x9A, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS) ] = 0, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS) ] = 0, + }, + }, + + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS) ] = 0x83, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = 0, + [C(RESULT_MISS) ] = 0, + }, + }, + + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + }, + + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + }, + + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + }, + + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = -1, + [C(RESULT_MISS) ] = -1, + }, + }, +}; + +const char *perf_pmu_name(void) +{ + return "bfin"; +} +EXPORT_SYMBOL(perf_pmu_name); + +int perf_num_counters(void) +{ + return ARRAY_SIZE(event_map); +} +EXPORT_SYMBOL(perf_num_counters); + +static u64 bfin_pfmon_read(int idx) +{ + return bfin_read32(PFCNTR0 + (idx * 4)); +} + +static void bfin_pfmon_disable(struct hw_perf_event *hwc, int idx) +{ + bfin_write_PFCTL(bfin_read_PFCTL() & ~PFCEN(idx, PFCEN_MASK)); +} + +static void bfin_pfmon_enable(struct hw_perf_event *hwc, int idx) +{ + u32 val, mask; + + val = PFPWR; + if (idx) { + mask = ~(PFCNT1 | PFMON1 | PFCEN1 | PEMUSW1); + /* The packed config is for event0, so shift it to event1 slots */ + val |= (hwc->config << (PFMON1_P - PFMON0_P)); + val |= (hwc->config & PFCNT0) << (PFCNT1_P - PFCNT0_P); + bfin_write_PFCNTR1(0); + } else { + mask = ~(PFCNT0 | PFMON0 | PFCEN0 | PEMUSW0); + val |= hwc->config; + bfin_write_PFCNTR0(0); + } + + bfin_write_PFCTL((bfin_read_PFCTL() & mask) | val); +} + +static void bfin_pfmon_disable_all(void) +{ + bfin_write_PFCTL(bfin_read_PFCTL() & ~PFPWR); +} + +static void bfin_pfmon_enable_all(void) +{ + bfin_write_PFCTL(bfin_read_PFCTL() | PFPWR); +} + +struct cpu_hw_events { + struct perf_event *events[MAX_HWEVENTS]; + unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)]; +}; +DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); + +static int hw_perf_cache_event(int config, int *evp) +{ + unsigned long type, op, result; + int ev; + + /* unpack config */ + type = config & 0xff; + op = (config >> 8) & 0xff; + result = (config >> 16) & 0xff; + + if (type >= PERF_COUNT_HW_CACHE_MAX || + op >= PERF_COUNT_HW_CACHE_OP_MAX || + result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ev = cache_events[type][op][result]; + if (ev == 0) + return -EOPNOTSUPP; + if (ev == -1) + return -EINVAL; + *evp = ev; + return 0; +} + +static void bfin_perf_event_update(struct perf_event *event, + struct hw_perf_event *hwc, int idx) +{ + u64 prev_raw_count, new_raw_count; + s64 delta; + int shift = 0; + + /* + * Depending on the counter configuration, they may or may not + * be chained, in which case the previous counter value can be + * updated underneath us if the lower-half overflows. + * + * Our tactic to handle this is to first atomically read and + * exchange a new raw count - then add that new-prev delta + * count to the generic counter atomically. + * + * As there is no interrupt associated with the overflow events, + * this is the simplest approach for maintaining consistency. + */ +again: + prev_raw_count = local64_read(&hwc->prev_count); + new_raw_count = bfin_pfmon_read(idx); + + if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, + new_raw_count) != prev_raw_count) + goto again; + + /* + * Now we have the new raw value and have updated the prev + * timestamp already. We can now calculate the elapsed delta + * (counter-)time and add that to the generic counter. + * + * Careful, not all hw sign-extends above the physical width + * of the count. + */ + delta = (new_raw_count << shift) - (prev_raw_count << shift); + delta >>= shift; + + local64_add(delta, &event->count); +} + +static void bfin_pmu_stop(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (!(event->hw.state & PERF_HES_STOPPED)) { + bfin_pfmon_disable(hwc, idx); + cpuc->events[idx] = NULL; + event->hw.state |= PERF_HES_STOPPED; + } + + if ((flags & PERF_EF_UPDATE) && !(event->hw.state & PERF_HES_UPTODATE)) { + bfin_perf_event_update(event, &event->hw, idx); + event->hw.state |= PERF_HES_UPTODATE; + } +} + +static void bfin_pmu_start(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + + if (WARN_ON_ONCE(idx == -1)) + return; + + if (flags & PERF_EF_RELOAD) + WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE)); + + cpuc->events[idx] = event; + event->hw.state = 0; + bfin_pfmon_enable(hwc, idx); +} + +static void bfin_pmu_del(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + + bfin_pmu_stop(event, PERF_EF_UPDATE); + __clear_bit(event->hw.idx, cpuc->used_mask); + + perf_event_update_userpage(event); +} + +static int bfin_pmu_add(struct perf_event *event, int flags) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct hw_perf_event *hwc = &event->hw; + int idx = hwc->idx; + int ret = -EAGAIN; + + perf_pmu_disable(event->pmu); + + if (__test_and_set_bit(idx, cpuc->used_mask)) { + idx = find_first_zero_bit(cpuc->used_mask, MAX_HWEVENTS); + if (idx == MAX_HWEVENTS) + goto out; + + __set_bit(idx, cpuc->used_mask); + hwc->idx = idx; + } + + bfin_pfmon_disable(hwc, idx); + + event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED; + if (flags & PERF_EF_START) + bfin_pmu_start(event, PERF_EF_RELOAD); + + perf_event_update_userpage(event); + ret = 0; +out: + perf_pmu_enable(event->pmu); + return ret; +} + +static void bfin_pmu_read(struct perf_event *event) +{ + bfin_perf_event_update(event, &event->hw, event->hw.idx); +} + +static int bfin_pmu_event_init(struct perf_event *event) +{ + struct perf_event_attr *attr = &event->attr; + struct hw_perf_event *hwc = &event->hw; + int config = -1; + int ret; + + if (attr->exclude_hv || attr->exclude_idle) + return -EPERM; + + /* + * All of the on-chip counters are "limited", in that they have + * no interrupts, and are therefore unable to do sampling without + * further work and timer assistance. + */ + if (hwc->sample_period) + return -EINVAL; + + ret = 0; + switch (attr->type) { + case PERF_TYPE_RAW: + config = PFMON(0, attr->config & PFMON_MASK) | + PFCNT(0, !(attr->config & 0x100)); + break; + case PERF_TYPE_HW_CACHE: + ret = hw_perf_cache_event(attr->config, &config); + break; + case PERF_TYPE_HARDWARE: + if (attr->config >= ARRAY_SIZE(event_map)) + return -EINVAL; + + config = event_map[attr->config]; + break; + } + + if (config == -1) + return -EINVAL; + + if (!attr->exclude_kernel) + config |= PFCEN(0, PFCEN_ENABLE_SUPV); + if (!attr->exclude_user) + config |= PFCEN(0, PFCEN_ENABLE_USER); + + hwc->config |= config; + + return ret; +} + +static void bfin_pmu_enable(struct pmu *pmu) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + struct perf_event *event; + struct hw_perf_event *hwc; + int i; + + for (i = 0; i < MAX_HWEVENTS; ++i) { + event = cpuc->events[i]; + if (!event) + continue; + hwc = &event->hw; + bfin_pfmon_enable(hwc, hwc->idx); + } + + bfin_pfmon_enable_all(); +} + +static void bfin_pmu_disable(struct pmu *pmu) +{ + bfin_pfmon_disable_all(); +} + +static struct pmu pmu = { + .pmu_enable = bfin_pmu_enable, + .pmu_disable = bfin_pmu_disable, + .event_init = bfin_pmu_event_init, + .add = bfin_pmu_add, + .del = bfin_pmu_del, + .start = bfin_pmu_start, + .stop = bfin_pmu_stop, + .read = bfin_pmu_read, +}; + +static void bfin_pmu_setup(int cpu) +{ + struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu); + + memset(cpuhw, 0, sizeof(struct cpu_hw_events)); +} + +static int __cpuinit +bfin_pmu_notifier(struct notifier_block *self, unsigned long action, void *hcpu) +{ + unsigned int cpu = (long)hcpu; + + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_UP_PREPARE: + bfin_write_PFCTL(0); + bfin_pmu_setup(cpu); + break; + + default: + break; + } + + return NOTIFY_OK; +} + +static int __init bfin_pmu_init(void) +{ + int ret; + + ret = perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); + if (!ret) + perf_cpu_notifier(bfin_pmu_notifier); + + return ret; +} +early_initcall(bfin_pmu_init); diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index b407bc8ad918..6a660fa921b5 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -171,10 +171,8 @@ asmlinkage int bfin_clone(struct pt_regs *regs) unsigned long newsp; #ifdef __ARCH_SYNC_CORE_DCACHE - if (current->rt.nr_cpus_allowed == num_possible_cpus()) { - current->cpus_allowed = cpumask_of_cpu(smp_processor_id()); - current->rt.nr_cpus_allowed = 1; - } + if (current->rt.nr_cpus_allowed == num_possible_cpus()) + set_cpus_allowed_ptr(current, cpumask_of(smp_processor_id())); #endif /* syscall2 puts clone_flags in r0 and usp in r1 */ diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index 53d08dee8531..488bdc51aaa5 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c @@ -23,6 +23,9 @@ __attribute__ ((__l1_text__, __noreturn__)) static void bfin_reset(void) { + if (!ANOMALY_05000353 && !ANOMALY_05000386) + bfrom_SoftReset((void *)(L1_SCRATCH_START + L1_SCRATCH_LENGTH - 20)); + /* Wait for completion of "system" events such as cache line * line fills so that we avoid infinite stalls later on as * much as possible. This code is in L1, so it won't trigger @@ -30,46 +33,40 @@ static void bfin_reset(void) */ __builtin_bfin_ssync(); - /* The bootrom checks to see how it was reset and will - * automatically perform a software reset for us when - * it starts executing after the core reset. - */ - if (ANOMALY_05000353 || ANOMALY_05000386) { - /* Initiate System software reset. */ - bfin_write_SWRST(0x7); + /* Initiate System software reset. */ + bfin_write_SWRST(0x7); - /* Due to the way reset is handled in the hardware, we need - * to delay for 10 SCLKS. The only reliable way to do this is - * to calculate the CCLK/SCLK ratio and multiply 10. For now, - * we'll assume worse case which is a 1:15 ratio. - */ - asm( - "LSETUP (1f, 1f) LC0 = %0\n" - "1: nop;" - : - : "a" (15 * 10) - : "LC0", "LB0", "LT0" - ); + /* Due to the way reset is handled in the hardware, we need + * to delay for 10 SCLKS. The only reliable way to do this is + * to calculate the CCLK/SCLK ratio and multiply 10. For now, + * we'll assume worse case which is a 1:15 ratio. + */ + asm( + "LSETUP (1f, 1f) LC0 = %0\n" + "1: nop;" + : + : "a" (15 * 10) + : "LC0", "LB0", "LT0" + ); - /* Clear System software reset */ - bfin_write_SWRST(0); + /* Clear System software reset */ + bfin_write_SWRST(0); - /* The BF526 ROM will crash during reset */ + /* The BF526 ROM will crash during reset */ #if defined(__ADSPBF522__) || defined(__ADSPBF524__) || defined(__ADSPBF526__) - bfin_read_SWRST(); + bfin_read_SWRST(); #endif - /* Wait for the SWRST write to complete. Cannot rely on SSYNC - * though as the System state is all reset now. - */ - asm( - "LSETUP (1f, 1f) LC1 = %0\n" - "1: nop;" - : - : "a" (15 * 1) - : "LC1", "LB1", "LT1" - ); - } + /* Wait for the SWRST write to complete. Cannot rely on SSYNC + * though as the System state is all reset now. + */ + asm( + "LSETUP (1f, 1f) LC1 = %0\n" + "1: nop;" + : + : "a" (15 * 1) + : "LC1", "LB1", "LT1" + ); while (1) /* Issue core reset */ diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 805c6132c779..536bd9d7e0cf 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -29,6 +29,7 @@ #include <asm/cpu.h> #include <asm/fixed_code.h> #include <asm/early_printk.h> +#include <asm/irq_handler.h> u16 _bfin_swrst; EXPORT_SYMBOL(_bfin_swrst); @@ -105,6 +106,8 @@ void __cpuinit bfin_setup_caches(unsigned int cpu) bfin_dcache_init(dcplb_tbl[cpu]); #endif + bfin_setup_cpudata(cpu); + /* * In cache coherence emulation mode, we need to have the * D-cache enabled before running any atomic operation which @@ -163,7 +166,6 @@ void __cpuinit bfin_setup_cpudata(unsigned int cpu) { struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); - cpudata->idle = current; cpudata->imemctl = bfin_read_IMEM_CONTROL(); cpudata->dmemctl = bfin_read_DMEM_CONTROL(); } @@ -851,6 +853,7 @@ void __init native_machine_early_platform_add_devices(void) void __init setup_arch(char **cmdline_p) { + u32 mmr; unsigned long sclk, cclk; native_machine_early_platform_add_devices(); @@ -902,10 +905,10 @@ void __init setup_arch(char **cmdline_p) bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); #endif #ifdef CONFIG_BFIN_HYSTERESIS_CONTROL - bfin_write_PORTF_HYSTERISIS(HYST_PORTF_0_15); - bfin_write_PORTG_HYSTERISIS(HYST_PORTG_0_15); - bfin_write_PORTH_HYSTERISIS(HYST_PORTH_0_15); - bfin_write_MISCPORT_HYSTERISIS((bfin_read_MISCPORT_HYSTERISIS() & + bfin_write_PORTF_HYSTERESIS(HYST_PORTF_0_15); + bfin_write_PORTG_HYSTERESIS(HYST_PORTG_0_15); + bfin_write_PORTH_HYSTERESIS(HYST_PORTH_0_15); + bfin_write_MISCPORT_HYSTERESIS((bfin_read_MISCPORT_HYSTERESIS() & ~HYST_NONEGPIO_MASK) | HYST_NONEGPIO); #endif @@ -921,17 +924,14 @@ void __init setup_arch(char **cmdline_p) bfin_read_IMDMA_D1_IRQ_STATUS(); } #endif - printk(KERN_INFO "Hardware Trace "); - if (bfin_read_TBUFCTL() & 0x1) - printk(KERN_CONT "Active "); - else - printk(KERN_CONT "Off "); - if (bfin_read_TBUFCTL() & 0x2) - printk(KERN_CONT "and Enabled\n"); - else - printk(KERN_CONT "and Disabled\n"); - printk(KERN_INFO "Boot Mode: %i\n", bfin_read_SYSCR() & 0xF); + mmr = bfin_read_TBUFCTL(); + printk(KERN_INFO "Hardware Trace %s and %sabled\n", + (mmr & 0x1) ? "active" : "off", + (mmr & 0x2) ? "en" : "dis"); + + mmr = bfin_read_SYSCR(); + printk(KERN_INFO "Boot Mode: %i\n", mmr & 0xF); /* Newer parts mirror SWRST bits in SYSCR */ #if defined(CONFIG_BF53x) || defined(CONFIG_BF561) || \ @@ -939,7 +939,7 @@ void __init setup_arch(char **cmdline_p) _bfin_swrst = bfin_read_SWRST(); #else /* Clear boot mode field */ - _bfin_swrst = bfin_read_SYSCR() & ~0xf; + _bfin_swrst = mmr & ~0xf; #endif #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT @@ -1036,8 +1036,6 @@ void __init setup_arch(char **cmdline_p) static int __init topology_init(void) { unsigned int cpu; - /* Record CPU-private information for the boot processor. */ - bfin_setup_cpudata(0); for_each_possible_cpu(cpu) { register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu); @@ -1283,12 +1281,14 @@ static int show_cpuinfo(struct seq_file *m, void *v) dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, BFIN_DLINES); #ifdef __ARCH_SYNC_CORE_DCACHE - seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", dcache_invld_count[cpu_num]); + seq_printf(m, "dcache flushes\t: %lu\n", dcache_invld_count[cpu_num]); #endif #ifdef __ARCH_SYNC_CORE_ICACHE - seq_printf(m, "SMP Icache Flushes\t: %lu\n\n", icache_invld_count[cpu_num]); + seq_printf(m, "icache flushes\t: %lu\n", icache_invld_count[cpu_num]); #endif + seq_printf(m, "\n"); + if (cpu_num != num_possible_cpus() - 1) return 0; @@ -1312,13 +1312,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) " in data cache\n"); } seq_printf(m, "board name\t: %s\n", bfin_board_name); - seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", - physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); - seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n", + seq_printf(m, "board memory\t: %ld kB (0x%08lx -> 0x%08lx)\n", + physical_mem_end >> 10, 0ul, physical_mem_end); + seq_printf(m, "kernel memory\t: %d kB (0x%08lx -> 0x%08lx)\n", ((int)memory_end - (int)_rambase) >> 10, - (void *)_rambase, - (void *)memory_end); - seq_printf(m, "\n"); + _rambase, memory_end); return 0; } @@ -1326,7 +1324,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) static void *c_start(struct seq_file *m, loff_t *pos) { if (*pos == 0) - *pos = first_cpu(cpu_online_map); + *pos = cpumask_first(cpu_online_mask); if (*pos >= num_online_cpus()) return NULL; @@ -1335,7 +1333,7 @@ static void *c_start(struct seq_file *m, loff_t *pos) static void *c_next(struct seq_file *m, void *v, loff_t *pos) { - *pos = next_cpu(*pos, cpu_online_map); + *pos = cpumask_next(*pos, cpu_online_mask); return c_start(m, pos); } diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 854fa49f1c3e..3ac5b66d14aa 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -136,7 +136,7 @@ SECTIONS . = ALIGN(16); INIT_DATA_SECTION(16) - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) .exit.data : { @@ -155,14 +155,8 @@ SECTIONS SECURITY_INITCALL INIT_RAM_FS - . = ALIGN(4); ___per_cpu_load = .; - ___per_cpu_start = .; - *(.data.percpu.first) - *(.data.percpu.page_aligned) - *(.data.percpu) - *(.data.percpu.shared_aligned) - ___per_cpu_end = .; + PERCPU_INPUT(32) EXIT_DATA __einitdata = .; diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index 24918c5f7ea1..d2f076fbbc9e 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -5,7 +5,7 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ @@ -141,6 +141,7 @@ #define ANOMALY_05000364 (0) #define ANOMALY_05000371 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (0) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -155,6 +156,7 @@ #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) #define ANOMALY_05000475 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h index b657d37a3402..bb79627f0929 100644 --- a/arch/blackfin/mach-bf518/include/mach/cdefBF512.h +++ b/arch/blackfin/mach-bf518/include/mach/cdefBF512.h @@ -990,18 +990,18 @@ #define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) #define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) #define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) -#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS) -#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val) -#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS) -#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val) -#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS) -#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val) +#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS) +#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val) +#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS) +#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val) +#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS) +#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val) #define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE) #define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val) #define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW) #define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val) -#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS) -#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val) +#define bfin_read_MISCPORT_HYSTERESIS() bfin_read16(MISCPORT_HYSTERESIS) +#define bfin_write_MISCPORT_HYSTERESIS(val) bfin_write16(MISCPORT_HYSTERESIS, val) /* HOST Port Registers */ diff --git a/arch/blackfin/mach-bf518/include/mach/defBF512.h b/arch/blackfin/mach-bf518/include/mach/defBF512.h index cb1172f50757..729704078cd7 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF512.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF512.h @@ -561,12 +561,12 @@ #define PORTF_SLEW 0xFFC03230 /* Port F slew control */ #define PORTG_SLEW 0xFFC03234 /* Port G slew control */ #define PORTH_SLEW 0xFFC03238 /* Port H slew control */ -#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ -#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ -#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */ #define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ #define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ -#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ +#define MISCPORT_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt trigger control */ /*********************************************************************************** diff --git a/arch/blackfin/mach-bf518/include/mach/irq.h b/arch/blackfin/mach-bf518/include/mach/irq.h index 435e76e31aaa..edf8efd457dc 100644 --- a/arch/blackfin/mach-bf518/include/mach/irq.h +++ b/arch/blackfin/mach-bf518/include/mach/irq.h @@ -7,38 +7,9 @@ #ifndef _BF518_IRQ_H_ #define _BF518_IRQ_H_ -/* - * Interrupt source definitions - Event Source Core Event Name - Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - - ..... - - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- - (lowest priority) IVG15 32 * -*/ - -#define NR_PERI_INTS (2 * 32) - -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /* Emulation */ -#define IRQ_RST 1 /* reset */ -#define IRQ_NMI 2 /* Non Maskable */ -#define IRQ_EVX 3 /* Exception */ -#define IRQ_UNUSED 4 /* - unused interrupt */ -#define IRQ_HWERR 5 /* Hardware Error */ -#define IRQ_CORETMR 6 /* Core timer */ - -#define BFIN_IRQ(x) ((x) + 7) +#include <mach-common/irq.h> + +#define NR_PERI_INTS (2 * 32) #define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ #define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ @@ -54,23 +25,23 @@ #define IRQ_UART0_ERROR BFIN_IRQ(12) /* UART0 Status */ #define IRQ_UART1_ERROR BFIN_IRQ(13) /* UART1 Status */ #define IRQ_RTC BFIN_IRQ(14) /* RTC */ -#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI) */ +#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI) */ #define IRQ_SPORT0_RX BFIN_IRQ(16) /* DMA 3 Channel (SPORT0 RX) */ #define IRQ_SPORT0_TX BFIN_IRQ(17) /* DMA 4 Channel (SPORT0 TX) */ #define IRQ_RSI BFIN_IRQ(17) /* DMA 4 Channel (RSI) */ #define IRQ_SPORT1_RX BFIN_IRQ(18) /* DMA 5 Channel (SPORT1 RX/SPI) */ #define IRQ_SPI1 BFIN_IRQ(18) /* DMA 5 Channel (SPI1) */ #define IRQ_SPORT1_TX BFIN_IRQ(19) /* DMA 6 Channel (SPORT1 TX) */ -#define IRQ_TWI BFIN_IRQ(20) /* TWI */ -#define IRQ_SPI0 BFIN_IRQ(21) /* DMA 7 Channel (SPI0) */ -#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ -#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ -#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ -#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ -#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ -#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ -#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX) */ -#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ +#define IRQ_TWI BFIN_IRQ(20) /* TWI */ +#define IRQ_SPI0 BFIN_IRQ(21) /* DMA 7 Channel (SPI0) */ +#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ +#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ +#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ +#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ +#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX) */ +#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ #define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX) */ #define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */ #define IRQ_TIMER0 BFIN_IRQ(32) /* Timer 0 */ @@ -96,101 +67,90 @@ #define IRQ_PWM_SYNC BFIN_IRQ(54) /* PWM Sync Interrupt */ #define IRQ_PTP_STAT BFIN_IRQ(55) /* PTP Stat Interrupt */ -#define SYS_IRQS BFIN_IRQ(63) /* 70 */ - -#define IRQ_PF0 71 -#define IRQ_PF1 72 -#define IRQ_PF2 73 -#define IRQ_PF3 74 -#define IRQ_PF4 75 -#define IRQ_PF5 76 -#define IRQ_PF6 77 -#define IRQ_PF7 78 -#define IRQ_PF8 79 -#define IRQ_PF9 80 -#define IRQ_PF10 81 -#define IRQ_PF11 82 -#define IRQ_PF12 83 -#define IRQ_PF13 84 -#define IRQ_PF14 85 -#define IRQ_PF15 86 - -#define IRQ_PG0 87 -#define IRQ_PG1 88 -#define IRQ_PG2 89 -#define IRQ_PG3 90 -#define IRQ_PG4 91 -#define IRQ_PG5 92 -#define IRQ_PG6 93 -#define IRQ_PG7 94 -#define IRQ_PG8 95 -#define IRQ_PG9 96 -#define IRQ_PG10 97 -#define IRQ_PG11 98 -#define IRQ_PG12 99 -#define IRQ_PG13 100 -#define IRQ_PG14 101 -#define IRQ_PG15 102 - -#define IRQ_PH0 103 -#define IRQ_PH1 104 -#define IRQ_PH2 105 -#define IRQ_PH3 106 -#define IRQ_PH4 107 -#define IRQ_PH5 108 -#define IRQ_PH6 109 -#define IRQ_PH7 110 -#define IRQ_PH8 111 -#define IRQ_PH9 112 -#define IRQ_PH10 113 -#define IRQ_PH11 114 -#define IRQ_PH12 115 -#define IRQ_PH13 116 -#define IRQ_PH14 117 -#define IRQ_PH15 118 - -#define GPIO_IRQ_BASE IRQ_PF0 - -#define IRQ_MAC_PHYINT 119 /* PHY_INT Interrupt */ -#define IRQ_MAC_MMCINT 120 /* MMC Counter Interrupt */ -#define IRQ_MAC_RXFSINT 121 /* RX Frame-Status Interrupt */ -#define IRQ_MAC_TXFSINT 122 /* TX Frame-Status Interrupt */ -#define IRQ_MAC_WAKEDET 123 /* Wake-Up Interrupt */ -#define IRQ_MAC_RXDMAERR 124 /* RX DMA Direction Error Interrupt */ -#define IRQ_MAC_TXDMAERR 125 /* TX DMA Direction Error Interrupt */ -#define IRQ_MAC_STMDONE 126 /* Station Mgt. Transfer Done Interrupt */ - -#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 +#define SYS_IRQS BFIN_IRQ(63) /* 70 */ + +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define IRQ_PG0 87 +#define IRQ_PG1 88 +#define IRQ_PG2 89 +#define IRQ_PG3 90 +#define IRQ_PG4 91 +#define IRQ_PG5 92 +#define IRQ_PG6 93 +#define IRQ_PG7 94 +#define IRQ_PG8 95 +#define IRQ_PG9 96 +#define IRQ_PG10 97 +#define IRQ_PG11 98 +#define IRQ_PG12 99 +#define IRQ_PG13 100 +#define IRQ_PG14 101 +#define IRQ_PG15 102 + +#define IRQ_PH0 103 +#define IRQ_PH1 104 +#define IRQ_PH2 105 +#define IRQ_PH3 106 +#define IRQ_PH4 107 +#define IRQ_PH5 108 +#define IRQ_PH6 109 +#define IRQ_PH7 110 +#define IRQ_PH8 111 +#define IRQ_PH9 112 +#define IRQ_PH10 113 +#define IRQ_PH11 114 +#define IRQ_PH12 115 +#define IRQ_PH13 116 +#define IRQ_PH14 117 +#define IRQ_PH15 118 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define IRQ_MAC_PHYINT 119 /* PHY_INT Interrupt */ +#define IRQ_MAC_MMCINT 120 /* MMC Counter Interrupt */ +#define IRQ_MAC_RXFSINT 121 /* RX Frame-Status Interrupt */ +#define IRQ_MAC_TXFSINT 122 /* TX Frame-Status Interrupt */ +#define IRQ_MAC_WAKEDET 123 /* Wake-Up Interrupt */ +#define IRQ_MAC_RXDMAERR 124 /* RX DMA Direction Error Interrupt */ +#define IRQ_MAC_TXDMAERR 125 /* TX DMA Direction Error Interrupt */ +#define IRQ_MAC_STMDONE 126 /* Station Mgt. Transfer Done Interrupt */ + +#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) /* IAR0 BIT FIELDS */ #define IRQ_PLL_WAKEUP_POS 0 #define IRQ_DMA0_ERROR_POS 4 -#define IRQ_DMAR0_BLK_POS 8 -#define IRQ_DMAR1_BLK_POS 12 -#define IRQ_DMAR0_OVR_POS 16 -#define IRQ_DMAR1_OVR_POS 20 -#define IRQ_PPI_ERROR_POS 24 -#define IRQ_MAC_ERROR_POS 28 +#define IRQ_DMAR0_BLK_POS 8 +#define IRQ_DMAR1_BLK_POS 12 +#define IRQ_DMAR0_OVR_POS 16 +#define IRQ_DMAR1_OVR_POS 20 +#define IRQ_PPI_ERROR_POS 24 +#define IRQ_MAC_ERROR_POS 28 /* IAR1 BIT FIELDS */ #define IRQ_SPORT0_ERROR_POS 0 #define IRQ_SPORT1_ERROR_POS 4 #define IRQ_PTP_ERROR_POS 8 -#define IRQ_UART0_ERROR_POS 16 -#define IRQ_UART1_ERROR_POS 20 -#define IRQ_RTC_POS 24 -#define IRQ_PPI_POS 28 +#define IRQ_UART0_ERROR_POS 16 +#define IRQ_UART1_ERROR_POS 20 +#define IRQ_RTC_POS 24 +#define IRQ_PPI_POS 28 /* IAR2 BIT FIELDS */ #define IRQ_SPORT0_RX_POS 0 @@ -199,19 +159,19 @@ #define IRQ_SPORT1_RX_POS 8 #define IRQ_SPI1_POS 8 #define IRQ_SPORT1_TX_POS 12 -#define IRQ_TWI_POS 16 -#define IRQ_SPI0_POS 20 -#define IRQ_UART0_RX_POS 24 -#define IRQ_UART0_TX_POS 28 +#define IRQ_TWI_POS 16 +#define IRQ_SPI0_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 /* IAR3 BIT FIELDS */ -#define IRQ_UART1_RX_POS 0 -#define IRQ_UART1_TX_POS 4 -#define IRQ_OPTSEC_POS 8 -#define IRQ_CNT_POS 12 -#define IRQ_MAC_RX_POS 16 +#define IRQ_UART1_RX_POS 0 +#define IRQ_UART1_TX_POS 4 +#define IRQ_OPTSEC_POS 8 +#define IRQ_CNT_POS 12 +#define IRQ_MAC_RX_POS 16 #define IRQ_PORTH_INTA_POS 20 -#define IRQ_MAC_TX_POS 24 +#define IRQ_MAC_TX_POS 24 #define IRQ_PORTH_INTB_POS 28 /* IAR4 BIT FIELDS */ @@ -227,19 +187,19 @@ /* IAR5 BIT FIELDS */ #define IRQ_PORTG_INTA_POS 0 #define IRQ_PORTG_INTB_POS 4 -#define IRQ_MEM_DMA0_POS 8 -#define IRQ_MEM_DMA1_POS 12 -#define IRQ_WATCH_POS 16 +#define IRQ_MEM_DMA0_POS 8 +#define IRQ_MEM_DMA1_POS 12 +#define IRQ_WATCH_POS 16 #define IRQ_PORTF_INTA_POS 20 #define IRQ_PORTF_INTB_POS 24 -#define IRQ_SPI0_ERROR_POS 28 +#define IRQ_SPI0_ERROR_POS 28 /* IAR6 BIT FIELDS */ -#define IRQ_SPI1_ERROR_POS 0 -#define IRQ_RSI_INT0_POS 12 -#define IRQ_RSI_INT1_POS 16 -#define IRQ_PWM_TRIP_POS 20 -#define IRQ_PWM_SYNC_POS 24 -#define IRQ_PTP_STAT_POS 28 - -#endif /* _BF518_IRQ_H_ */ +#define IRQ_SPI1_ERROR_POS 0 +#define IRQ_RSI_INT0_POS 12 +#define IRQ_RSI_INT1_POS 16 +#define IRQ_PWM_TRIP_POS 20 +#define IRQ_PWM_SYNC_POS 24 +#define IRQ_PTP_STAT_POS 28 + +#endif diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 2cd2ff6f3043..e67ac7720668 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -26,6 +26,7 @@ #include <asm/portmux.h> #include <asm/dpmc.h> #include <linux/spi/ad7877.h> +#include <asm/bfin_sport.h> /* * Name the Board for the /proc/cpuinfo @@ -526,11 +527,69 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + +static const u16 bfin_snd_pin[][7] = { + {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0, 0}, + {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS, + P_SPORT1_DRPRI, P_SPORT1_RSCLK, P_SPORT1_TFS, 0}, +}; + +static struct bfin_snd_platform_data bfin_snd_data[] = { + { + .pin_req = &bfin_snd_pin[0][0], + }, + { + .pin_req = &bfin_snd_pin[1][0], + }, +}; + +#define BFIN_SND_RES(x) \ + [x] = { \ + { \ + .start = SPORT##x##_TCR1, \ + .end = SPORT##x##_TCR1, \ + .flags = IORESOURCE_MEM \ + }, \ + { \ + .start = CH_SPORT##x##_RX, \ + .end = CH_SPORT##x##_RX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = CH_SPORT##x##_TX, \ + .end = CH_SPORT##x##_TX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = IRQ_SPORT##x##_ERROR, \ + .end = IRQ_SPORT##x##_ERROR, \ + .flags = IORESOURCE_IRQ, \ + } \ + } + +static struct resource bfin_snd_resources[][4] = { + BFIN_SND_RES(0), + BFIN_SND_RES(1), +}; + +static struct platform_device bfin_pcm = { + .name = "bfin-pcm-audio", + .id = -1, +}; +#endif + #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif @@ -538,7 +597,11 @@ static struct platform_device bfin_i2s = { static struct platform_device bfin_tdm = { .name = "bfin-tdm", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif @@ -583,7 +646,9 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, .chip_select = 4, + .platform_data = "ad1836", .controller_data = &ad1836_spi_chip_info, + .mode = SPI_MODE_3, }, #endif #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) @@ -1211,6 +1276,11 @@ static struct platform_device *stamp_devices[] __initdata = { &ezkit_flash_device, #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) + &bfin_pcm, +#endif + #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) &bfin_i2s, #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 9358afa05c90..e66a7e89cd3c 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -5,14 +5,14 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: * - Revision E, 03/15/2010; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision H, 04/29/2010; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -220,6 +220,8 @@ #define ANOMALY_05000483 (1) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ #define ANOMALY_05000485 (_ANOMALY_BF526_BF527(< 2, < 3)) +/* The CODEC Zero-Cross Detect Feature is not Functional */ +#define ANOMALY_05000487 (1) /* IFLUSH sucks at life */ #define ANOMALY_05000491 (1) @@ -268,11 +270,13 @@ #define ANOMALY_05000323 (0) #define ANOMALY_05000362 (1) #define ANOMALY_05000363 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000400 (0) #define ANOMALY_05000402 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h index 618dfcdfa91a..2c12e879aa4e 100644 --- a/arch/blackfin/mach-bf527/include/mach/cdefBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h @@ -1007,18 +1007,18 @@ #define bfin_write_PORTG_SLEW(val) bfin_write16(PORTG_SLEW, val) #define bfin_read_PORTH_SLEW() bfin_read16(PORTH_SLEW) #define bfin_write_PORTH_SLEW(val) bfin_write16(PORTH_SLEW, val) -#define bfin_read_PORTF_HYSTERISIS() bfin_read16(PORTF_HYSTERISIS) -#define bfin_write_PORTF_HYSTERISIS(val) bfin_write16(PORTF_HYSTERISIS, val) -#define bfin_read_PORTG_HYSTERISIS() bfin_read16(PORTG_HYSTERISIS) -#define bfin_write_PORTG_HYSTERISIS(val) bfin_write16(PORTG_HYSTERISIS, val) -#define bfin_read_PORTH_HYSTERISIS() bfin_read16(PORTH_HYSTERISIS) -#define bfin_write_PORTH_HYSTERISIS(val) bfin_write16(PORTH_HYSTERISIS, val) +#define bfin_read_PORTF_HYSTERESIS() bfin_read16(PORTF_HYSTERESIS) +#define bfin_write_PORTF_HYSTERESIS(val) bfin_write16(PORTF_HYSTERESIS, val) +#define bfin_read_PORTG_HYSTERESIS() bfin_read16(PORTG_HYSTERESIS) +#define bfin_write_PORTG_HYSTERESIS(val) bfin_write16(PORTG_HYSTERESIS, val) +#define bfin_read_PORTH_HYSTERESIS() bfin_read16(PORTH_HYSTERESIS) +#define bfin_write_PORTH_HYSTERESIS(val) bfin_write16(PORTH_HYSTERESIS, val) #define bfin_read_MISCPORT_DRIVE() bfin_read16(MISCPORT_DRIVE) #define bfin_write_MISCPORT_DRIVE(val) bfin_write16(MISCPORT_DRIVE, val) #define bfin_read_MISCPORT_SLEW() bfin_read16(MISCPORT_SLEW) #define bfin_write_MISCPORT_SLEW(val) bfin_write16(MISCPORT_SLEW, val) -#define bfin_read_MISCPORT_HYSTERISIS() bfin_read16(MISCPORT_HYSTERISIS) -#define bfin_write_MISCPORT_HYSTERISIS(val) bfin_write16(MISCPORT_HYSTERISIS, val) +#define bfin_read_MISCPORT_HYSTERESIS() bfin_read16(MISCPORT_HYSTERESIS) +#define bfin_write_MISCPORT_HYSTERESIS(val) bfin_write16(MISCPORT_HYSTERESIS, val) /* HOST Port Registers */ diff --git a/arch/blackfin/mach-bf527/include/mach/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h index 84ef11e52644..37d353a19722 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF522.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h @@ -562,12 +562,12 @@ #define PORTF_SLEW 0xFFC03230 /* Port F slew control */ #define PORTG_SLEW 0xFFC03234 /* Port G slew control */ #define PORTH_SLEW 0xFFC03238 /* Port H slew control */ -#define PORTF_HYSTERISIS 0xFFC03240 /* Port F Schmitt trigger control */ -#define PORTG_HYSTERISIS 0xFFC03244 /* Port G Schmitt trigger control */ -#define PORTH_HYSTERISIS 0xFFC03248 /* Port H Schmitt trigger control */ +#define PORTF_HYSTERESIS 0xFFC03240 /* Port F Schmitt trigger control */ +#define PORTG_HYSTERESIS 0xFFC03244 /* Port G Schmitt trigger control */ +#define PORTH_HYSTERESIS 0xFFC03248 /* Port H Schmitt trigger control */ #define MISCPORT_DRIVE 0xFFC03280 /* Misc Port drive strength control */ #define MISCPORT_SLEW 0xFFC03284 /* Misc Port slew control */ -#define MISCPORT_HYSTERISIS 0xFFC03288 /* Misc Port Schmitt trigger control */ +#define MISCPORT_HYSTERESIS 0xFFC03288 /* Misc Port Schmitt trigger control */ /*********************************************************************************** diff --git a/arch/blackfin/mach-bf527/include/mach/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h index 704d9253e41d..ed7310ff819b 100644 --- a/arch/blackfin/mach-bf527/include/mach/irq.h +++ b/arch/blackfin/mach-bf527/include/mach/irq.h @@ -7,38 +7,9 @@ #ifndef _BF527_IRQ_H_ #define _BF527_IRQ_H_ -/* - * Interrupt source definitions - Event Source Core Event Name - Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - - ..... - - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- - (lowest priority) IVG15 32 * -*/ - -#define NR_PERI_INTS (2 * 32) - -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /* Emulation */ -#define IRQ_RST 1 /* reset */ -#define IRQ_NMI 2 /* Non Maskable */ -#define IRQ_EVX 3 /* Exception */ -#define IRQ_UNUSED 4 /* - unused interrupt */ -#define IRQ_HWERR 5 /* Hardware Error */ -#define IRQ_CORETMR 6 /* Core timer */ - -#define BFIN_IRQ(x) ((x) + 7) +#include <mach-common/irq.h> + +#define NR_PERI_INTS (2 * 32) #define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ #define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ @@ -53,21 +24,21 @@ #define IRQ_UART0_ERROR BFIN_IRQ(12) /* UART0 Status */ #define IRQ_UART1_ERROR BFIN_IRQ(13) /* UART1 Status */ #define IRQ_RTC BFIN_IRQ(14) /* RTC */ -#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI/NAND) */ +#define IRQ_PPI BFIN_IRQ(15) /* DMA Channel 0 (PPI/NAND) */ #define IRQ_SPORT0_RX BFIN_IRQ(16) /* DMA 3 Channel (SPORT0 RX) */ #define IRQ_SPORT0_TX BFIN_IRQ(17) /* DMA 4 Channel (SPORT0 TX) */ #define IRQ_SPORT1_RX BFIN_IRQ(18) /* DMA 5 Channel (SPORT1 RX) */ #define IRQ_SPORT1_TX BFIN_IRQ(19) /* DMA 6 Channel (SPORT1 TX) */ -#define IRQ_TWI BFIN_IRQ(20) /* TWI */ -#define IRQ_SPI BFIN_IRQ(21) /* DMA 7 Channel (SPI) */ -#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ -#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ -#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ -#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ -#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ -#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ -#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX/HDMA) */ -#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ +#define IRQ_TWI BFIN_IRQ(20) /* TWI */ +#define IRQ_SPI BFIN_IRQ(21) /* DMA 7 Channel (SPI) */ +#define IRQ_UART0_RX BFIN_IRQ(22) /* DMA8 Channel (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(23) /* DMA9 Channel (UART0 TX) */ +#define IRQ_UART1_RX BFIN_IRQ(24) /* DMA10 Channel (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(25) /* DMA11 Channel (UART1 TX) */ +#define IRQ_OPTSEC BFIN_IRQ(26) /* OTPSEC Interrupt */ +#define IRQ_CNT BFIN_IRQ(27) /* GP Counter */ +#define IRQ_MAC_RX BFIN_IRQ(28) /* DMA1 Channel (MAC RX/HDMA) */ +#define IRQ_PORTH_INTA BFIN_IRQ(29) /* Port H Interrupt A */ #define IRQ_MAC_TX BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ #define IRQ_NFC BFIN_IRQ(30) /* DMA2 Channel (MAC TX/NAND) */ #define IRQ_PORTH_INTB BFIN_IRQ(31) /* Port H Interrupt B */ @@ -96,119 +67,108 @@ #define IRQ_USB_INT2 BFIN_IRQ(54) /* USB_INT2 Interrupt */ #define IRQ_USB_DMA BFIN_IRQ(55) /* USB_DMAINT Interrupt */ -#define SYS_IRQS BFIN_IRQ(63) /* 70 */ - -#define IRQ_PF0 71 -#define IRQ_PF1 72 -#define IRQ_PF2 73 -#define IRQ_PF3 74 -#define IRQ_PF4 75 -#define IRQ_PF5 76 -#define IRQ_PF6 77 -#define IRQ_PF7 78 -#define IRQ_PF8 79 -#define IRQ_PF9 80 -#define IRQ_PF10 81 -#define IRQ_PF11 82 -#define IRQ_PF12 83 -#define IRQ_PF13 84 -#define IRQ_PF14 85 -#define IRQ_PF15 86 - -#define IRQ_PG0 87 -#define IRQ_PG1 88 -#define IRQ_PG2 89 -#define IRQ_PG3 90 -#define IRQ_PG4 91 -#define IRQ_PG5 92 -#define IRQ_PG6 93 -#define IRQ_PG7 94 -#define IRQ_PG8 95 -#define IRQ_PG9 96 -#define IRQ_PG10 97 -#define IRQ_PG11 98 -#define IRQ_PG12 99 -#define IRQ_PG13 100 -#define IRQ_PG14 101 -#define IRQ_PG15 102 - -#define IRQ_PH0 103 -#define IRQ_PH1 104 -#define IRQ_PH2 105 -#define IRQ_PH3 106 -#define IRQ_PH4 107 -#define IRQ_PH5 108 -#define IRQ_PH6 109 -#define IRQ_PH7 110 -#define IRQ_PH8 111 -#define IRQ_PH9 112 -#define IRQ_PH10 113 -#define IRQ_PH11 114 -#define IRQ_PH12 115 -#define IRQ_PH13 116 -#define IRQ_PH14 117 -#define IRQ_PH15 118 - -#define GPIO_IRQ_BASE IRQ_PF0 - -#define IRQ_MAC_PHYINT 119 /* PHY_INT Interrupt */ -#define IRQ_MAC_MMCINT 120 /* MMC Counter Interrupt */ -#define IRQ_MAC_RXFSINT 121 /* RX Frame-Status Interrupt */ -#define IRQ_MAC_TXFSINT 122 /* TX Frame-Status Interrupt */ -#define IRQ_MAC_WAKEDET 123 /* Wake-Up Interrupt */ -#define IRQ_MAC_RXDMAERR 124 /* RX DMA Direction Error Interrupt */ -#define IRQ_MAC_TXDMAERR 125 /* TX DMA Direction Error Interrupt */ -#define IRQ_MAC_STMDONE 126 /* Station Mgt. Transfer Done Interrupt */ - -#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 +#define SYS_IRQS BFIN_IRQ(63) /* 70 */ + +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define IRQ_PG0 87 +#define IRQ_PG1 88 +#define IRQ_PG2 89 +#define IRQ_PG3 90 +#define IRQ_PG4 91 +#define IRQ_PG5 92 +#define IRQ_PG6 93 +#define IRQ_PG7 94 +#define IRQ_PG8 95 +#define IRQ_PG9 96 +#define IRQ_PG10 97 +#define IRQ_PG11 98 +#define IRQ_PG12 99 +#define IRQ_PG13 100 +#define IRQ_PG14 101 +#define IRQ_PG15 102 + +#define IRQ_PH0 103 +#define IRQ_PH1 104 +#define IRQ_PH2 105 +#define IRQ_PH3 106 +#define IRQ_PH4 107 +#define IRQ_PH5 108 +#define IRQ_PH6 109 +#define IRQ_PH7 110 +#define IRQ_PH8 111 +#define IRQ_PH9 112 +#define IRQ_PH10 113 +#define IRQ_PH11 114 +#define IRQ_PH12 115 +#define IRQ_PH13 116 +#define IRQ_PH14 117 +#define IRQ_PH15 118 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define IRQ_MAC_PHYINT 119 /* PHY_INT Interrupt */ +#define IRQ_MAC_MMCINT 120 /* MMC Counter Interrupt */ +#define IRQ_MAC_RXFSINT 121 /* RX Frame-Status Interrupt */ +#define IRQ_MAC_TXFSINT 122 /* TX Frame-Status Interrupt */ +#define IRQ_MAC_WAKEDET 123 /* Wake-Up Interrupt */ +#define IRQ_MAC_RXDMAERR 124 /* RX DMA Direction Error Interrupt */ +#define IRQ_MAC_TXDMAERR 125 /* TX DMA Direction Error Interrupt */ +#define IRQ_MAC_STMDONE 126 /* Station Mgt. Transfer Done Interrupt */ + +#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) /* IAR0 BIT FIELDS */ #define IRQ_PLL_WAKEUP_POS 0 #define IRQ_DMA0_ERROR_POS 4 -#define IRQ_DMAR0_BLK_POS 8 -#define IRQ_DMAR1_BLK_POS 12 -#define IRQ_DMAR0_OVR_POS 16 -#define IRQ_DMAR1_OVR_POS 20 -#define IRQ_PPI_ERROR_POS 24 -#define IRQ_MAC_ERROR_POS 28 +#define IRQ_DMAR0_BLK_POS 8 +#define IRQ_DMAR1_BLK_POS 12 +#define IRQ_DMAR0_OVR_POS 16 +#define IRQ_DMAR1_OVR_POS 20 +#define IRQ_PPI_ERROR_POS 24 +#define IRQ_MAC_ERROR_POS 28 /* IAR1 BIT FIELDS */ #define IRQ_SPORT0_ERROR_POS 0 #define IRQ_SPORT1_ERROR_POS 4 -#define IRQ_UART0_ERROR_POS 16 -#define IRQ_UART1_ERROR_POS 20 -#define IRQ_RTC_POS 24 -#define IRQ_PPI_POS 28 +#define IRQ_UART0_ERROR_POS 16 +#define IRQ_UART1_ERROR_POS 20 +#define IRQ_RTC_POS 24 +#define IRQ_PPI_POS 28 /* IAR2 BIT FIELDS */ #define IRQ_SPORT0_RX_POS 0 #define IRQ_SPORT0_TX_POS 4 #define IRQ_SPORT1_RX_POS 8 #define IRQ_SPORT1_TX_POS 12 -#define IRQ_TWI_POS 16 -#define IRQ_SPI_POS 20 -#define IRQ_UART0_RX_POS 24 -#define IRQ_UART0_TX_POS 28 +#define IRQ_TWI_POS 16 +#define IRQ_SPI_POS 20 +#define IRQ_UART0_RX_POS 24 +#define IRQ_UART0_TX_POS 28 /* IAR3 BIT FIELDS */ -#define IRQ_UART1_RX_POS 0 -#define IRQ_UART1_TX_POS 4 -#define IRQ_OPTSEC_POS 8 -#define IRQ_CNT_POS 12 -#define IRQ_MAC_RX_POS 16 +#define IRQ_UART1_RX_POS 0 +#define IRQ_UART1_TX_POS 4 +#define IRQ_OPTSEC_POS 8 +#define IRQ_CNT_POS 12 +#define IRQ_MAC_RX_POS 16 #define IRQ_PORTH_INTA_POS 20 -#define IRQ_MAC_TX_POS 24 +#define IRQ_MAC_TX_POS 24 #define IRQ_PORTH_INTB_POS 28 /* IAR4 BIT FIELDS */ @@ -224,21 +184,21 @@ /* IAR5 BIT FIELDS */ #define IRQ_PORTG_INTA_POS 0 #define IRQ_PORTG_INTB_POS 4 -#define IRQ_MEM_DMA0_POS 8 -#define IRQ_MEM_DMA1_POS 12 -#define IRQ_WATCH_POS 16 +#define IRQ_MEM_DMA0_POS 8 +#define IRQ_MEM_DMA1_POS 12 +#define IRQ_WATCH_POS 16 #define IRQ_PORTF_INTA_POS 20 #define IRQ_PORTF_INTB_POS 24 -#define IRQ_SPI_ERROR_POS 28 +#define IRQ_SPI_ERROR_POS 28 /* IAR6 BIT FIELDS */ -#define IRQ_NFC_ERROR_POS 0 -#define IRQ_HDMA_ERROR_POS 4 -#define IRQ_HDMA_POS 8 -#define IRQ_USB_EINT_POS 12 -#define IRQ_USB_INT0_POS 16 -#define IRQ_USB_INT1_POS 20 -#define IRQ_USB_INT2_POS 24 -#define IRQ_USB_DMA_POS 28 - -#endif /* _BF527_IRQ_H_ */ +#define IRQ_NFC_ERROR_POS 0 +#define IRQ_HDMA_ERROR_POS 4 +#define IRQ_HDMA_POS 8 +#define IRQ_USB_EINT_POS 12 +#define IRQ_USB_INT0_POS 16 +#define IRQ_USB_INT1_POS 20 +#define IRQ_USB_INT2_POS 24 +#define IRQ_USB_DMA_POS 28 + +#endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index 78f872187918..72aa59440f82 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision E, 09/18/2008; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List + * - Revision F, 05/25/2010; ADSP-BF531/BF532/BF533 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -206,6 +206,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ +#define ANOMALY_05000471 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) /* Possible Lockup Condition whem Modifying PLL from External Memory */ @@ -351,12 +355,14 @@ #define ANOMALY_05000362 (1) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000412 (0) #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) @@ -364,6 +370,7 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h index 1f7e9765d954..709733754142 100644 --- a/arch/blackfin/mach-bf533/include/mach/irq.h +++ b/arch/blackfin/mach-bf533/include/mach/irq.h @@ -7,83 +7,36 @@ #ifndef _BF533_IRQ_H_ #define _BF533_IRQ_H_ -/* - * Interrupt source definitions - Event Source Core Event Name -Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - PLL Wakeup Interrupt IVG7 7 - DMA Error (generic) IVG7 8 - PPI Error Interrupt IVG7 9 - SPORT0 Error Interrupt IVG7 10 - SPORT1 Error Interrupt IVG7 11 - SPI Error Interrupt IVG7 12 - UART Error Interrupt IVG7 13 - RTC Interrupt IVG8 14 - DMA0 Interrupt (PPI) IVG8 15 - DMA1 (SPORT0 RX) IVG9 16 - DMA2 (SPORT0 TX) IVG9 17 - DMA3 (SPORT1 RX) IVG9 18 - DMA4 (SPORT1 TX) IVG9 19 - DMA5 (PPI) IVG10 20 - DMA6 (UART RX) IVG10 21 - DMA7 (UART TX) IVG10 22 - Timer0 IVG11 23 - Timer1 IVG11 24 - Timer2 IVG11 25 - PF Interrupt A IVG12 26 - PF Interrupt B IVG12 27 - DMA8/9 Interrupt IVG13 28 - DMA10/11 Interrupt IVG13 29 - Watchdog Timer IVG13 30 +#include <mach-common/irq.h> - Softirq IVG14 31 - System Call -- - (lowest priority) IVG15 32 * - */ -#define SYS_IRQS 31 -#define NR_PERI_INTS 24 +#define NR_PERI_INTS 24 -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /*Emulation */ -#define IRQ_RST 1 /*reset */ -#define IRQ_NMI 2 /*Non Maskable */ -#define IRQ_EVX 3 /*Exception */ -#define IRQ_UNUSED 4 /*- unused interrupt*/ -#define IRQ_HWERR 5 /*Hardware Error */ -#define IRQ_CORETMR 6 /*Core timer */ +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR BFIN_IRQ(1) /* DMA Error (general) */ +#define IRQ_PPI_ERROR BFIN_IRQ(2) /* PPI Error Interrupt */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(3) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(4) /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR BFIN_IRQ(5) /* SPI Error Interrupt */ +#define IRQ_UART0_ERROR BFIN_IRQ(6) /* UART Error Interrupt */ +#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */ +#define IRQ_PPI BFIN_IRQ(8) /* DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX BFIN_IRQ(9) /* DMA1 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX BFIN_IRQ(10) /* DMA2 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX BFIN_IRQ(11) /* DMA3 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX BFIN_IRQ(12) /* DMA4 Interrupt (SPORT1 TX) */ +#define IRQ_SPI BFIN_IRQ(13) /* DMA5 Interrupt (SPI) */ +#define IRQ_UART0_RX BFIN_IRQ(14) /* DMA6 Interrupt (UART RX) */ +#define IRQ_UART0_TX BFIN_IRQ(15) /* DMA7 Interrupt (UART TX) */ +#define IRQ_TIMER0 BFIN_IRQ(16) /* Timer 0 */ +#define IRQ_TIMER1 BFIN_IRQ(17) /* Timer 1 */ +#define IRQ_TIMER2 BFIN_IRQ(18) /* Timer 2 */ +#define IRQ_PROG_INTA BFIN_IRQ(19) /* Programmable Flags A (8) */ +#define IRQ_PROG_INTB BFIN_IRQ(20) /* Programmable Flags B (8) */ +#define IRQ_MEM_DMA0 BFIN_IRQ(21) /* DMA8/9 Interrupt (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 BFIN_IRQ(22) /* DMA10/11 Interrupt (Memory DMA Stream 1) */ +#define IRQ_WATCH BFIN_IRQ(23) /* Watch Dog Timer */ -#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ -#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ -#define IRQ_PPI_ERROR 9 /*PPI Error Interrupt */ -#define IRQ_SPORT0_ERROR 10 /*SPORT0 Error Interrupt */ -#define IRQ_SPORT1_ERROR 11 /*SPORT1 Error Interrupt */ -#define IRQ_SPI_ERROR 12 /*SPI Error Interrupt */ -#define IRQ_UART0_ERROR 13 /*UART Error Interrupt */ -#define IRQ_RTC 14 /*RTC Interrupt */ -#define IRQ_PPI 15 /*DMA0 Interrupt (PPI) */ -#define IRQ_SPORT0_RX 16 /*DMA1 Interrupt (SPORT0 RX) */ -#define IRQ_SPORT0_TX 17 /*DMA2 Interrupt (SPORT0 TX) */ -#define IRQ_SPORT1_RX 18 /*DMA3 Interrupt (SPORT1 RX) */ -#define IRQ_SPORT1_TX 19 /*DMA4 Interrupt (SPORT1 TX) */ -#define IRQ_SPI 20 /*DMA5 Interrupt (SPI) */ -#define IRQ_UART0_RX 21 /*DMA6 Interrupt (UART RX) */ -#define IRQ_UART0_TX 22 /*DMA7 Interrupt (UART TX) */ -#define IRQ_TIMER0 23 /*Timer 0 */ -#define IRQ_TIMER1 24 /*Timer 1 */ -#define IRQ_TIMER2 25 /*Timer 2 */ -#define IRQ_PROG_INTA 26 /*Programmable Flags A (8) */ -#define IRQ_PROG_INTB 27 /*Programmable Flags B (8) */ -#define IRQ_MEM_DMA0 28 /*DMA8/9 Interrupt (Memory DMA Stream 0) */ -#define IRQ_MEM_DMA1 29 /*DMA10/11 Interrupt (Memory DMA Stream 1) */ -#define IRQ_WATCH 30 /*Watch Dog Timer */ +#define SYS_IRQS 31 #define IRQ_PF0 33 #define IRQ_PF1 34 @@ -105,46 +58,35 @@ Core Emulation ** #define GPIO_IRQ_BASE IRQ_PF0 #define NR_MACH_IRQS (IRQ_PF15 + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 -/* IAR0 BIT FIELDS*/ -#define RTC_ERROR_POS 28 -#define UART_ERROR_POS 24 -#define SPORT1_ERROR_POS 20 -#define SPI_ERROR_POS 16 -#define SPORT0_ERROR_POS 12 -#define PPI_ERROR_POS 8 -#define DMA_ERROR_POS 4 -#define PLLWAKE_ERROR_POS 0 +/* IAR0 BIT FIELDS */ +#define RTC_ERROR_POS 28 +#define UART_ERROR_POS 24 +#define SPORT1_ERROR_POS 20 +#define SPI_ERROR_POS 16 +#define SPORT0_ERROR_POS 12 +#define PPI_ERROR_POS 8 +#define DMA_ERROR_POS 4 +#define PLLWAKE_ERROR_POS 0 -/* IAR1 BIT FIELDS*/ -#define DMA7_UARTTX_POS 28 -#define DMA6_UARTRX_POS 24 -#define DMA5_SPI_POS 20 -#define DMA4_SPORT1TX_POS 16 -#define DMA3_SPORT1RX_POS 12 -#define DMA2_SPORT0TX_POS 8 -#define DMA1_SPORT0RX_POS 4 -#define DMA0_PPI_POS 0 +/* IAR1 BIT FIELDS */ +#define DMA7_UARTTX_POS 28 +#define DMA6_UARTRX_POS 24 +#define DMA5_SPI_POS 20 +#define DMA4_SPORT1TX_POS 16 +#define DMA3_SPORT1RX_POS 12 +#define DMA2_SPORT0TX_POS 8 +#define DMA1_SPORT0RX_POS 4 +#define DMA0_PPI_POS 0 -/* IAR2 BIT FIELDS*/ -#define WDTIMER_POS 28 -#define MEMDMA1_POS 24 -#define MEMDMA0_POS 20 -#define PFB_POS 16 -#define PFA_POS 12 -#define TIMER2_POS 8 -#define TIMER1_POS 4 -#define TIMER0_POS 0 +/* IAR2 BIT FIELDS */ +#define WDTIMER_POS 28 +#define MEMDMA1_POS 24 +#define MEMDMA0_POS 20 +#define PFB_POS 16 +#define PFA_POS 12 +#define TIMER2_POS 8 +#define TIMER1_POS 4 +#define TIMER0_POS 0 -#endif /* _BF533_IRQ_H_ */ +#endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 3fa335405b31..e16dc4560048 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -35,6 +35,7 @@ #include <asm/reboot.h> #include <asm/portmux.h> #include <asm/dpmc.h> +#include <asm/bfin_sport.h> #ifdef CONFIG_REGULATOR_FIXED_VOLTAGE #include <linux/regulator/fixed.h> #endif @@ -2585,27 +2586,103 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ + defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + +#define SPORT_REQ(x) \ + [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ + P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0} + +static const u16 bfin_snd_pin[][7] = { + SPORT_REQ(0), + SPORT_REQ(1), +}; + +static struct bfin_snd_platform_data bfin_snd_data[] = { + { + .pin_req = &bfin_snd_pin[0][0], + }, + { + .pin_req = &bfin_snd_pin[1][0], + }, +}; + +#define BFIN_SND_RES(x) \ + [x] = { \ + { \ + .start = SPORT##x##_TCR1, \ + .end = SPORT##x##_TCR1, \ + .flags = IORESOURCE_MEM \ + }, \ + { \ + .start = CH_SPORT##x##_RX, \ + .end = CH_SPORT##x##_RX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = CH_SPORT##x##_TX, \ + .end = CH_SPORT##x##_TX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = IRQ_SPORT##x##_ERROR, \ + .end = IRQ_SPORT##x##_ERROR, \ + .flags = IORESOURCE_IRQ, \ + } \ + } + +static struct resource bfin_snd_resources[][4] = { + BFIN_SND_RES(0), + BFIN_SND_RES(1), +}; + +static struct platform_device bfin_pcm = { + .name = "bfin-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +static struct platform_device bfin_ad73311_codec_device = { + .name = "ad73311", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) static struct platform_device bfin_tdm = { .name = "bfin-tdm", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif @@ -2796,17 +2873,28 @@ static struct platform_device *stamp_devices[] __initdata = { &stamp_flash_device, #endif -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ + defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) + &bfin_ad73311_codec_device, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) &bfin_i2s, #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) &bfin_tdm, #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) &bfin_ac97, #endif + #if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE) #if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \ defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE) diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index 43df6afd22ad..7f8e5a9f5db6 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision D, 09/18/2008; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List + * - Revision E, 05/25/2010; ADSP-BF534/ADSP-BF536/ADSP-BF537 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -160,12 +160,16 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) /* Possible Lockup Condition whem Modifying PLL from External Memory */ #define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) +/* Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability */ +#define ANOMALY_05000480 (__SILICON_REVISION__ < 3) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ #define ANOMALY_05000481 (1) /* IFLUSH sucks at life */ @@ -204,6 +208,7 @@ #define ANOMALY_05000363 (0) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -211,6 +216,7 @@ #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) diff --git a/arch/blackfin/mach-bf537/include/mach/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h index 1a6d617c5fcf..b6ed8235bda4 100644 --- a/arch/blackfin/mach-bf537/include/mach/irq.h +++ b/arch/blackfin/mach-bf537/include/mach/irq.h @@ -7,193 +7,178 @@ #ifndef _BF537_IRQ_H_ #define _BF537_IRQ_H_ -/* - * Interrupt source definitions - * Event Source Core Event Name - * Core Emulation ** - * Events (highest priority) EMU 0 - * Reset RST 1 - * NMI NMI 2 - * Exception EVX 3 - * Reserved -- 4 - * Hardware Error IVHW 5 - * Core Timer IVTMR 6 - * ..... - * - * Softirq IVG14 - * System Call -- - * (lowest priority) IVG15 - */ - -#define SYS_IRQS 39 -#define NR_PERI_INTS 32 - -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /*Emulation */ -#define IRQ_RST 1 /*reset */ -#define IRQ_NMI 2 /*Non Maskable */ -#define IRQ_EVX 3 /*Exception */ -#define IRQ_UNUSED 4 /*- unused interrupt*/ -#define IRQ_HWERR 5 /*Hardware Error */ -#define IRQ_CORETMR 6 /*Core timer */ - -#define IRQ_PLL_WAKEUP 7 /*PLL Wakeup Interrupt */ -#define IRQ_DMA_ERROR 8 /*DMA Error (general) */ -#define IRQ_GENERIC_ERROR 9 /*GENERIC Error Interrupt */ -#define IRQ_RTC 10 /*RTC Interrupt */ -#define IRQ_PPI 11 /*DMA0 Interrupt (PPI) */ -#define IRQ_SPORT0_RX 12 /*DMA3 Interrupt (SPORT0 RX) */ -#define IRQ_SPORT0_TX 13 /*DMA4 Interrupt (SPORT0 TX) */ -#define IRQ_SPORT1_RX 14 /*DMA5 Interrupt (SPORT1 RX) */ -#define IRQ_SPORT1_TX 15 /*DMA6 Interrupt (SPORT1 TX) */ -#define IRQ_TWI 16 /*TWI Interrupt */ -#define IRQ_SPI 17 /*DMA7 Interrupt (SPI) */ -#define IRQ_UART0_RX 18 /*DMA8 Interrupt (UART0 RX) */ -#define IRQ_UART0_TX 19 /*DMA9 Interrupt (UART0 TX) */ -#define IRQ_UART1_RX 20 /*DMA10 Interrupt (UART1 RX) */ -#define IRQ_UART1_TX 21 /*DMA11 Interrupt (UART1 TX) */ -#define IRQ_CAN_RX 22 /*CAN Receive Interrupt */ -#define IRQ_CAN_TX 23 /*CAN Transmit Interrupt */ -#define IRQ_MAC_RX 24 /*DMA1 (Ethernet RX) Interrupt */ -#define IRQ_MAC_TX 25 /*DMA2 (Ethernet TX) Interrupt */ -#define IRQ_TIMER0 26 /*Timer 0 */ -#define IRQ_TIMER1 27 /*Timer 1 */ -#define IRQ_TIMER2 28 /*Timer 2 */ -#define IRQ_TIMER3 29 /*Timer 3 */ -#define IRQ_TIMER4 30 /*Timer 4 */ -#define IRQ_TIMER5 31 /*Timer 5 */ -#define IRQ_TIMER6 32 /*Timer 6 */ -#define IRQ_TIMER7 33 /*Timer 7 */ -#define IRQ_PROG_INTA 34 /* PF Ports F&G (PF15:0) Interrupt A */ -#define IRQ_PORTG_INTB 35 /* PF Port G (PF15:0) Interrupt B */ -#define IRQ_MEM_DMA0 36 /*(Memory DMA Stream 0) */ -#define IRQ_MEM_DMA1 37 /*(Memory DMA Stream 1) */ -#define IRQ_PROG_INTB 38 /* PF Ports F (PF15:0) Interrupt B */ -#define IRQ_WATCH 38 /*Watch Dog Timer */ - -#define IRQ_PPI_ERROR 42 /*PPI Error Interrupt */ -#define IRQ_CAN_ERROR 43 /*CAN Error Interrupt */ -#define IRQ_MAC_ERROR 44 /*MAC Status/Error Interrupt */ -#define IRQ_SPORT0_ERROR 45 /*SPORT0 Error Interrupt */ -#define IRQ_SPORT1_ERROR 46 /*SPORT1 Error Interrupt */ -#define IRQ_SPI_ERROR 47 /*SPI Error Interrupt */ -#define IRQ_UART0_ERROR 48 /*UART Error Interrupt */ -#define IRQ_UART1_ERROR 49 /*UART Error Interrupt */ - -#define IRQ_PF0 50 -#define IRQ_PF1 51 -#define IRQ_PF2 52 -#define IRQ_PF3 53 -#define IRQ_PF4 54 -#define IRQ_PF5 55 -#define IRQ_PF6 56 -#define IRQ_PF7 57 -#define IRQ_PF8 58 -#define IRQ_PF9 59 -#define IRQ_PF10 60 -#define IRQ_PF11 61 -#define IRQ_PF12 62 -#define IRQ_PF13 63 -#define IRQ_PF14 64 -#define IRQ_PF15 65 - -#define IRQ_PG0 66 -#define IRQ_PG1 67 -#define IRQ_PG2 68 -#define IRQ_PG3 69 -#define IRQ_PG4 70 -#define IRQ_PG5 71 -#define IRQ_PG6 72 -#define IRQ_PG7 73 -#define IRQ_PG8 74 -#define IRQ_PG9 75 -#define IRQ_PG10 76 -#define IRQ_PG11 77 -#define IRQ_PG12 78 -#define IRQ_PG13 79 -#define IRQ_PG14 80 -#define IRQ_PG15 81 - -#define IRQ_PH0 82 -#define IRQ_PH1 83 -#define IRQ_PH2 84 -#define IRQ_PH3 85 -#define IRQ_PH4 86 -#define IRQ_PH5 87 -#define IRQ_PH6 88 -#define IRQ_PH7 89 -#define IRQ_PH8 90 -#define IRQ_PH9 91 -#define IRQ_PH10 92 -#define IRQ_PH11 93 -#define IRQ_PH12 94 -#define IRQ_PH13 95 -#define IRQ_PH14 96 -#define IRQ_PH15 97 - -#define GPIO_IRQ_BASE IRQ_PF0 - -#define IRQ_MAC_PHYINT 98 /* PHY_INT Interrupt */ -#define IRQ_MAC_MMCINT 99 /* MMC Counter Interrupt */ -#define IRQ_MAC_RXFSINT 100 /* RX Frame-Status Interrupt */ -#define IRQ_MAC_TXFSINT 101 /* TX Frame-Status Interrupt */ -#define IRQ_MAC_WAKEDET 102 /* Wake-Up Interrupt */ -#define IRQ_MAC_RXDMAERR 103 /* RX DMA Direction Error Interrupt */ -#define IRQ_MAC_TXDMAERR 104 /* TX DMA Direction Error Interrupt */ -#define IRQ_MAC_STMDONE 105 /* Station Mgt. Transfer Done Interrupt */ - -#define NR_MACH_IRQS (IRQ_MAC_STMDONE + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 - -/* IAR0 BIT FIELDS*/ -#define IRQ_PLL_WAKEUP_POS 0 -#define IRQ_DMA_ERROR_POS 4 -#define IRQ_ERROR_POS 8 -#define IRQ_RTC_POS 12 -#define IRQ_PPI_POS 16 -#define IRQ_SPORT0_RX_POS 20 -#define IRQ_SPORT0_TX_POS 24 -#define IRQ_SPORT1_RX_POS 28 - -/* IAR1 BIT FIELDS*/ -#define IRQ_SPORT1_TX_POS 0 -#define IRQ_TWI_POS 4 -#define IRQ_SPI_POS 8 -#define IRQ_UART0_RX_POS 12 -#define IRQ_UART0_TX_POS 16 -#define IRQ_UART1_RX_POS 20 -#define IRQ_UART1_TX_POS 24 -#define IRQ_CAN_RX_POS 28 - -/* IAR2 BIT FIELDS*/ -#define IRQ_CAN_TX_POS 0 -#define IRQ_MAC_RX_POS 4 -#define IRQ_MAC_TX_POS 8 -#define IRQ_TIMER0_POS 12 -#define IRQ_TIMER1_POS 16 -#define IRQ_TIMER2_POS 20 -#define IRQ_TIMER3_POS 24 -#define IRQ_TIMER4_POS 28 - -/* IAR3 BIT FIELDS*/ -#define IRQ_TIMER5_POS 0 -#define IRQ_TIMER6_POS 4 -#define IRQ_TIMER7_POS 8 -#define IRQ_PROG_INTA_POS 12 -#define IRQ_PORTG_INTB_POS 16 -#define IRQ_MEM_DMA0_POS 20 -#define IRQ_MEM_DMA1_POS 24 -#define IRQ_WATCH_POS 28 - -#endif /* _BF537_IRQ_H_ */ +#include <mach-common/irq.h> + +#define NR_PERI_INTS 32 + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA_ERROR BFIN_IRQ(1) /* DMA Error (general) */ +#define IRQ_GENERIC_ERROR BFIN_IRQ(2) /* GENERIC Error Interrupt */ +#define IRQ_RTC BFIN_IRQ(3) /* RTC Interrupt */ +#define IRQ_PPI BFIN_IRQ(4) /* DMA0 Interrupt (PPI) */ +#define IRQ_SPORT0_RX BFIN_IRQ(5) /* DMA3 Interrupt (SPORT0 RX) */ +#define IRQ_SPORT0_TX BFIN_IRQ(6) /* DMA4 Interrupt (SPORT0 TX) */ +#define IRQ_SPORT1_RX BFIN_IRQ(7) /* DMA5 Interrupt (SPORT1 RX) */ +#define IRQ_SPORT1_TX BFIN_IRQ(8) /* DMA6 Interrupt (SPORT1 TX) */ +#define IRQ_TWI BFIN_IRQ(9) /* TWI Interrupt */ +#define IRQ_SPI BFIN_IRQ(10) /* DMA7 Interrupt (SPI) */ +#define IRQ_UART0_RX BFIN_IRQ(11) /* DMA8 Interrupt (UART0 RX) */ +#define IRQ_UART0_TX BFIN_IRQ(12) /* DMA9 Interrupt (UART0 TX) */ +#define IRQ_UART1_RX BFIN_IRQ(13) /* DMA10 Interrupt (UART1 RX) */ +#define IRQ_UART1_TX BFIN_IRQ(14) /* DMA11 Interrupt (UART1 TX) */ +#define IRQ_CAN_RX BFIN_IRQ(15) /* CAN Receive Interrupt */ +#define IRQ_CAN_TX BFIN_IRQ(16) /* CAN Transmit Interrupt */ +#define IRQ_PH_INTA_MAC_RX BFIN_IRQ(17) /* Port H Interrupt A & DMA1 Interrupt (Ethernet RX) */ +#define IRQ_PH_INTB_MAC_TX BFIN_IRQ(18) /* Port H Interrupt B & DMA2 Interrupt (Ethernet TX) */ +#define IRQ_TIMER0 BFIN_IRQ(19) /* Timer 0 */ +#define IRQ_TIMER1 BFIN_IRQ(20) /* Timer 1 */ +#define IRQ_TIMER2 BFIN_IRQ(21) /* Timer 2 */ +#define IRQ_TIMER3 BFIN_IRQ(22) /* Timer 3 */ +#define IRQ_TIMER4 BFIN_IRQ(23) /* Timer 4 */ +#define IRQ_TIMER5 BFIN_IRQ(24) /* Timer 5 */ +#define IRQ_TIMER6 BFIN_IRQ(25) /* Timer 6 */ +#define IRQ_TIMER7 BFIN_IRQ(26) /* Timer 7 */ +#define IRQ_PF_INTA_PG_INTA BFIN_IRQ(27) /* Ports F&G Interrupt A */ +#define IRQ_PORTG_INTB BFIN_IRQ(28) /* Port G Interrupt B */ +#define IRQ_MEM_DMA0 BFIN_IRQ(29) /* (Memory DMA Stream 0) */ +#define IRQ_MEM_DMA1 BFIN_IRQ(30) /* (Memory DMA Stream 1) */ +#define IRQ_PF_INTB_WATCH BFIN_IRQ(31) /* Watchdog & Port F Interrupt B */ + +#define SYS_IRQS 39 + +#define IRQ_PPI_ERROR 42 /* PPI Error Interrupt */ +#define IRQ_CAN_ERROR 43 /* CAN Error Interrupt */ +#define IRQ_MAC_ERROR 44 /* MAC Status/Error Interrupt */ +#define IRQ_SPORT0_ERROR 45 /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR 46 /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR 47 /* SPI Error Interrupt */ +#define IRQ_UART0_ERROR 48 /* UART Error Interrupt */ +#define IRQ_UART1_ERROR 49 /* UART Error Interrupt */ + +#define IRQ_PF0 50 +#define IRQ_PF1 51 +#define IRQ_PF2 52 +#define IRQ_PF3 53 +#define IRQ_PF4 54 +#define IRQ_PF5 55 +#define IRQ_PF6 56 +#define IRQ_PF7 57 +#define IRQ_PF8 58 +#define IRQ_PF9 59 +#define IRQ_PF10 60 +#define IRQ_PF11 61 +#define IRQ_PF12 62 +#define IRQ_PF13 63 +#define IRQ_PF14 64 +#define IRQ_PF15 65 + +#define IRQ_PG0 66 +#define IRQ_PG1 67 +#define IRQ_PG2 68 +#define IRQ_PG3 69 +#define IRQ_PG4 70 +#define IRQ_PG5 71 +#define IRQ_PG6 72 +#define IRQ_PG7 73 +#define IRQ_PG8 74 +#define IRQ_PG9 75 +#define IRQ_PG10 76 +#define IRQ_PG11 77 +#define IRQ_PG12 78 +#define IRQ_PG13 79 +#define IRQ_PG14 80 +#define IRQ_PG15 81 + +#define IRQ_PH0 82 +#define IRQ_PH1 83 +#define IRQ_PH2 84 +#define IRQ_PH3 85 +#define IRQ_PH4 86 +#define IRQ_PH5 87 +#define IRQ_PH6 88 +#define IRQ_PH7 89 +#define IRQ_PH8 90 +#define IRQ_PH9 91 +#define IRQ_PH10 92 +#define IRQ_PH11 93 +#define IRQ_PH12 94 +#define IRQ_PH13 95 +#define IRQ_PH14 96 +#define IRQ_PH15 97 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define IRQ_MAC_PHYINT 98 /* PHY_INT Interrupt */ +#define IRQ_MAC_MMCINT 99 /* MMC Counter Interrupt */ +#define IRQ_MAC_RXFSINT 100 /* RX Frame-Status Interrupt */ +#define IRQ_MAC_TXFSINT 101 /* TX Frame-Status Interrupt */ +#define IRQ_MAC_WAKEDET 102 /* Wake-Up Interrupt */ +#define IRQ_MAC_RXDMAERR 103 /* RX DMA Direction Error Interrupt */ +#define IRQ_MAC_TXDMAERR 104 /* TX DMA Direction Error Interrupt */ +#define IRQ_MAC_STMDONE 105 /* Station Mgt. Transfer Done Interrupt */ + +#define IRQ_MAC_RX 106 /* DMA1 Interrupt (Ethernet RX) */ +#define IRQ_PORTH_INTA 107 /* Port H Interrupt A */ + +#if 0 /* No Interrupt B support (yet) */ +#define IRQ_MAC_TX 108 /* DMA2 Interrupt (Ethernet TX) */ +#define IRQ_PORTH_INTB 109 /* Port H Interrupt B */ +#else +#define IRQ_MAC_TX IRQ_PH_INTB_MAC_TX +#endif + +#define IRQ_PORTF_INTA 110 /* Port F Interrupt A */ +#define IRQ_PORTG_INTA 111 /* Port G Interrupt A */ + +#if 0 /* No Interrupt B support (yet) */ +#define IRQ_WATCH 112 /* Watchdog Timer */ +#define IRQ_PORTF_INTB 113 /* Port F Interrupt B */ +#else +#define IRQ_WATCH IRQ_PF_INTB_WATCH +#endif + +#define NR_MACH_IRQS (113 + 1) + +/* IAR0 BIT FIELDS */ +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA_ERROR_POS 4 +#define IRQ_ERROR_POS 8 +#define IRQ_RTC_POS 12 +#define IRQ_PPI_POS 16 +#define IRQ_SPORT0_RX_POS 20 +#define IRQ_SPORT0_TX_POS 24 +#define IRQ_SPORT1_RX_POS 28 + +/* IAR1 BIT FIELDS */ +#define IRQ_SPORT1_TX_POS 0 +#define IRQ_TWI_POS 4 +#define IRQ_SPI_POS 8 +#define IRQ_UART0_RX_POS 12 +#define IRQ_UART0_TX_POS 16 +#define IRQ_UART1_RX_POS 20 +#define IRQ_UART1_TX_POS 24 +#define IRQ_CAN_RX_POS 28 + +/* IAR2 BIT FIELDS */ +#define IRQ_CAN_TX_POS 0 +#define IRQ_MAC_RX_POS 4 +#define IRQ_MAC_TX_POS 8 +#define IRQ_TIMER0_POS 12 +#define IRQ_TIMER1_POS 16 +#define IRQ_TIMER2_POS 20 +#define IRQ_TIMER3_POS 24 +#define IRQ_TIMER4_POS 28 + +/* IAR3 BIT FIELDS */ +#define IRQ_TIMER5_POS 0 +#define IRQ_TIMER6_POS 4 +#define IRQ_TIMER7_POS 8 +#define IRQ_PROG_INTA_POS 12 +#define IRQ_PORTG_INTB_POS 16 +#define IRQ_MEM_DMA0_POS 20 +#define IRQ_MEM_DMA1_POS 24 +#define IRQ_WATCH_POS 28 + +#define init_mach_irq init_mach_irq + +#endif diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index f6500622b35d..2137a209a22b 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -10,6 +10,13 @@ #include <linux/irq.h> #include <asm/blackfin.h> +#include <asm/irq_handler.h> +#include <asm/bfin5xx_spi.h> +#include <asm/bfin_sport.h> +#include <asm/bfin_can.h> +#include <asm/bfin_dma.h> +#include <asm/dpmc.h> + void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ @@ -51,3 +58,159 @@ void __init program_IAR(void) SSYNC(); } + +#define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */ +#define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */ +#define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ +#define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ +#define UART_ERR_MASK (0x6) /* UART_IIR */ +#define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ + +static int error_int_mask; + +static void bf537_generic_error_mask_irq(struct irq_data *d) +{ + error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR)); + if (!error_int_mask) + bfin_internal_mask_irq(IRQ_GENERIC_ERROR); +} + +static void bf537_generic_error_unmask_irq(struct irq_data *d) +{ + bfin_internal_unmask_irq(IRQ_GENERIC_ERROR); + error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR); +} + +static struct irq_chip bf537_generic_error_irqchip = { + .name = "ERROR", + .irq_ack = bfin_ack_noop, + .irq_mask_ack = bf537_generic_error_mask_irq, + .irq_mask = bf537_generic_error_mask_irq, + .irq_unmask = bf537_generic_error_unmask_irq, +}; + +static void bf537_demux_error_irq(unsigned int int_err_irq, + struct irq_desc *inta_desc) +{ + int irq = 0; + +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) + if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK) + irq = IRQ_MAC_ERROR; + else +#endif + if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK) + irq = IRQ_SPORT0_ERROR; + else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK) + irq = IRQ_SPORT1_ERROR; + else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK) + irq = IRQ_PPI_ERROR; + else if (bfin_read_CAN_GIF() & CAN_ERR_MASK) + irq = IRQ_CAN_ERROR; + else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) + irq = IRQ_SPI_ERROR; + else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK) + irq = IRQ_UART0_ERROR; + else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK) + irq = IRQ_UART1_ERROR; + + if (irq) { + if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) + bfin_handle_irq(irq); + else { + + switch (irq) { + case IRQ_PPI_ERROR: + bfin_write_PPI_STATUS(PPI_ERR_MASK); + break; +#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) + case IRQ_MAC_ERROR: + bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK); + break; +#endif + case IRQ_SPORT0_ERROR: + bfin_write_SPORT0_STAT(SPORT_ERR_MASK); + break; + + case IRQ_SPORT1_ERROR: + bfin_write_SPORT1_STAT(SPORT_ERR_MASK); + break; + + case IRQ_CAN_ERROR: + bfin_write_CAN_GIS(CAN_ERR_MASK); + break; + + case IRQ_SPI_ERROR: + bfin_write_SPI_STAT(SPI_ERR_MASK); + break; + + default: + break; + } + + pr_debug("IRQ %d:" + " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", + irq); + } + } else + pr_err("%s: IRQ ?: PERIPHERAL ERROR INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", + __func__); + +} + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static int mac_rx_int_mask; + +static void bf537_mac_rx_mask_irq(struct irq_data *d) +{ + mac_rx_int_mask &= ~(1L << (d->irq - IRQ_MAC_RX)); + if (!mac_rx_int_mask) + bfin_internal_mask_irq(IRQ_PH_INTA_MAC_RX); +} + +static void bf537_mac_rx_unmask_irq(struct irq_data *d) +{ + bfin_internal_unmask_irq(IRQ_PH_INTA_MAC_RX); + mac_rx_int_mask |= 1L << (d->irq - IRQ_MAC_RX); +} + +static struct irq_chip bf537_mac_rx_irqchip = { + .name = "ERROR", + .irq_ack = bfin_ack_noop, + .irq_mask_ack = bf537_mac_rx_mask_irq, + .irq_mask = bf537_mac_rx_mask_irq, + .irq_unmask = bf537_mac_rx_unmask_irq, +}; + +static void bf537_demux_mac_rx_irq(unsigned int int_irq, + struct irq_desc *desc) +{ + if (bfin_read_DMA1_IRQ_STATUS() & (DMA_DONE | DMA_ERR)) + bfin_handle_irq(IRQ_MAC_RX); + else + bfin_demux_gpio_irq(int_irq, desc); +} +#endif + +void __init init_mach_irq(void) +{ + int irq; + +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) + /* Clear EMAC Interrupt Status bits so we can demux it later */ + bfin_write_EMAC_SYSTAT(-1); +#endif + + irq_set_chained_handler(IRQ_GENERIC_ERROR, bf537_demux_error_irq); + for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) + irq_set_chip_and_handler(irq, &bf537_generic_error_irqchip, + handle_level_irq); + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + irq_set_chained_handler(IRQ_PH_INTA_MAC_RX, bf537_demux_mac_rx_irq); + irq_set_chip_and_handler(IRQ_MAC_RX, &bf537_mac_rx_irqchip, handle_level_irq); + irq_set_chip_and_handler(IRQ_PORTH_INTA, &bf537_mac_rx_irqchip, handle_level_irq); + + irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq); +#endif +} diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 8774b481c78e..55e7d0712a94 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -5,14 +5,14 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision H, 07/10/2009; ADSP-BF538/BF538F Blackfin Processor Anomaly List - * - Revision M, 07/10/2009; ADSP-BF539/BF539F Blackfin Processor Anomaly List + * - Revision I, 05/25/2010; ADSP-BF538/BF538F Blackfin Processor Anomaly List + * - Revision N, 05/25/2010; ADSP-BF539/BF539F Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -179,6 +179,7 @@ #define ANOMALY_05000363 (0) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) @@ -186,6 +187,7 @@ #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) @@ -193,6 +195,7 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/irq.h b/arch/blackfin/mach-bf538/include/mach/irq.h index 7a479d224dc7..07ca069d37cd 100644 --- a/arch/blackfin/mach-bf538/include/mach/irq.h +++ b/arch/blackfin/mach-bf538/include/mach/irq.h @@ -7,38 +7,9 @@ #ifndef _BF538_IRQ_H_ #define _BF538_IRQ_H_ -/* - * Interrupt source definitions - Event Source Core Event Name - Core Emulation ** - Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - - ..... - - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- - (lowest priority) IVG15 32 * -*/ - -#define NR_PERI_INTS (2 * 32) - -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /* Emulation */ -#define IRQ_RST 1 /* reset */ -#define IRQ_NMI 2 /* Non Maskable */ -#define IRQ_EVX 3 /* Exception */ -#define IRQ_UNUSED 4 /* - unused interrupt */ -#define IRQ_HWERR 5 /* Hardware Error */ -#define IRQ_CORETMR 6 /* Core timer */ - -#define BFIN_IRQ(x) ((x) + 7) +#include <mach-common/irq.h> + +#define NR_PERI_INTS (2 * 32) #define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ #define IRQ_DMA0_ERROR BFIN_IRQ(1) /* DMA Error 0 (generic) */ @@ -91,37 +62,26 @@ #define SYS_IRQS BFIN_IRQ(63) /* 70 */ -#define IRQ_PF0 71 -#define IRQ_PF1 72 -#define IRQ_PF2 73 -#define IRQ_PF3 74 -#define IRQ_PF4 75 -#define IRQ_PF5 76 -#define IRQ_PF6 77 -#define IRQ_PF7 78 -#define IRQ_PF8 79 -#define IRQ_PF9 80 -#define IRQ_PF10 81 -#define IRQ_PF11 82 -#define IRQ_PF12 83 -#define IRQ_PF13 84 -#define IRQ_PF14 85 -#define IRQ_PF15 86 - -#define GPIO_IRQ_BASE IRQ_PF0 - -#define NR_MACH_IRQS (IRQ_PF15 + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 +#define IRQ_PF0 71 +#define IRQ_PF1 72 +#define IRQ_PF2 73 +#define IRQ_PF3 74 +#define IRQ_PF4 75 +#define IRQ_PF5 76 +#define IRQ_PF6 77 +#define IRQ_PF7 78 +#define IRQ_PF8 79 +#define IRQ_PF9 80 +#define IRQ_PF10 81 +#define IRQ_PF11 82 +#define IRQ_PF12 83 +#define IRQ_PF13 84 +#define IRQ_PF14 85 +#define IRQ_PF15 86 + +#define GPIO_IRQ_BASE IRQ_PF0 + +#define NR_MACH_IRQS (IRQ_PF15 + 1) /* IAR0 BIT FIELDS */ #define IRQ_PLL_WAKEUP_POS 0 @@ -184,4 +144,5 @@ #define IRQ_CAN_TX_POS 0 #define IRQ_MEM1_DMA0_POS 4 #define IRQ_MEM1_DMA1_POS 8 -#endif /* _BF538_IRQ_H_ */ + +#endif diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 93e19a54a880..311bf9970fe7 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -22,6 +22,7 @@ #include <asm/gpio.h> #include <asm/nand.h> #include <asm/dpmc.h> +#include <asm/bfin_sport.h> #include <asm/portmux.h> #include <asm/bfin_sdh.h> #include <mach/bf54x_keys.h> @@ -956,7 +957,15 @@ static struct mtd_partition ezkit_partitions[] = { .offset = MTDPART_OFS_APPEND, }, { .name = "file system(nor)", - .size = MTDPART_SIZ_FULL, + .size = 0x1000000 - 0x80000 - 0x400000 - 0x8000 * 4, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "config(nor)", + .size = 0x8000 * 3, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "u-boot env(nor)", + .size = 0x8000, .offset = MTDPART_OFS_APPEND, } }; @@ -1312,27 +1321,110 @@ static struct platform_device bfin_dpmc = { }, }; -#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ + defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + +#define SPORT_REQ(x) \ + [x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \ + P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0} + +static const u16 bfin_snd_pin[][7] = { + SPORT_REQ(0), + SPORT_REQ(1), +}; + +static struct bfin_snd_platform_data bfin_snd_data[] = { + { + .pin_req = &bfin_snd_pin[0][0], + }, + { + .pin_req = &bfin_snd_pin[1][0], + }, +}; + +#define BFIN_SND_RES(x) \ + [x] = { \ + { \ + .start = SPORT##x##_TCR1, \ + .end = SPORT##x##_TCR1, \ + .flags = IORESOURCE_MEM \ + }, \ + { \ + .start = CH_SPORT##x##_RX, \ + .end = CH_SPORT##x##_RX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = CH_SPORT##x##_TX, \ + .end = CH_SPORT##x##_TX, \ + .flags = IORESOURCE_DMA, \ + }, \ + { \ + .start = IRQ_SPORT##x##_ERROR, \ + .end = IRQ_SPORT##x##_ERROR, \ + .flags = IORESOURCE_IRQ, \ + } \ + } + +static struct resource bfin_snd_resources[][4] = { + BFIN_SND_RES(0), + BFIN_SND_RES(1), +}; + +static struct platform_device bfin_pcm = { + .name = "bfin-pcm-audio", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD73311) || defined(CONFIG_SND_BF5XX_SOC_AD73311_MODULE) +static struct platform_device bfin_ad73311_codec_device = { + .name = "ad73311", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) +static struct platform_device bfin_ad1980_codec_device = { + .name = "ad1980", + .id = -1, +}; +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_I2S) || defined(CONFIG_SND_BF5XX_SOC_I2S_MODULE) static struct platform_device bfin_i2s = { .name = "bfin-i2s", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_TDM) || defined(CONFIG_SND_BF5XX_SOC_TDM_MODULE) static struct platform_device bfin_tdm = { .name = "bfin-tdm", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif -#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) +#if defined(CONFIG_SND_BF5XX_SOC_AC97) || defined(CONFIG_SND_BF5XX_SOC_AC97_MODULE) static struct platform_device bfin_ac97 = { .name = "bfin-ac97", .id = CONFIG_SND_BF5XX_SPORT_NUM, - /* TODO: add platform data here */ + .num_resources = ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]), + .resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM], + .dev = { + .platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM], + }, }; #endif @@ -1450,6 +1542,16 @@ static struct platform_device *ezkit_devices[] __initdata = { &ezkit_flash_device, #endif +#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) || \ + defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE) || \ + defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE) + &bfin_pcm, +#endif + +#if defined(CONFIG_SND_BF5XX_SOC_AD1980) || defined(CONFIG_SND_BF5XX_SOC_AD1980_MODULE) + &bfin_ad1980_codec_device, +#endif + #if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE) &bfin_i2s, #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index ffd0537295ac..9e70785bdde3 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision I, 07/23/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List + * - Revision J, 06/03/2010; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -220,6 +220,8 @@ #define ANOMALY_05000481 (1) /* Possible USB Data Corruption When Multiple Endpoints Are Accessed by the Core */ #define ANOMALY_05000483 (1) +/* DDR Trim May Not Be Performed for Certain VLEV Values in OTP Page PBS00L */ +#define ANOMALY_05000484 (__SILICON_REVISION__ < 3) /* PLL_CTL Change Using bfrom_SysControl() Can Result in Processor Overclocking */ #define ANOMALY_05000485 (__SILICON_REVISION__ >= 2) /* IFLUSH sucks at life */ @@ -274,6 +276,8 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000475 (0) +#define ANOMALY_05000480 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h index 7f87787e7738..533b8095b540 100644 --- a/arch/blackfin/mach-bf548/include/mach/irq.h +++ b/arch/blackfin/mach-bf548/include/mach/irq.h @@ -7,38 +7,9 @@ #ifndef _BF548_IRQ_H_ #define _BF548_IRQ_H_ -/* - * Interrupt source definitions - Event Source Core Event Name -Core Emulation ** -Events (highest priority) EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - -..... - - Software Interrupt 1 IVG14 31 - Software Interrupt 2 -- - (lowest priority) IVG15 32 * - */ - -#define NR_PERI_INTS (32 * 3) - -/* The ABSTRACT IRQ definitions */ -/** the first seven of the following are fixed, the rest you change if you need to **/ -#define IRQ_EMU 0 /* Emulation */ -#define IRQ_RST 1 /* reset */ -#define IRQ_NMI 2 /* Non Maskable */ -#define IRQ_EVX 3 /* Exception */ -#define IRQ_UNUSED 4 /* - unused interrupt*/ -#define IRQ_HWERR 5 /* Hardware Error */ -#define IRQ_CORETMR 6 /* Core timer */ +#include <mach-common/irq.h> -#define BFIN_IRQ(x) ((x) + 7) +#define NR_PERI_INTS (3 * 32) #define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ #define IRQ_DMAC0_ERROR BFIN_IRQ(1) /* DMAC0 Status Interrupt */ @@ -311,49 +282,37 @@ Events (highest priority) EMU 0 #define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */ #define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */ -#define GPIO_IRQ_BASE IRQ_PA0 +#define GPIO_IRQ_BASE IRQ_PA0 -#define NR_MACH_IRQS (IRQ_PJ15 + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) +#define NR_MACH_IRQS (IRQ_PJ15 + 1) /* For compatibility reasons with existing code */ -#define IRQ_DMAC0_ERR IRQ_DMAC0_ERROR -#define IRQ_EPPI0_ERR IRQ_EPPI0_ERROR +#define IRQ_DMAC0_ERR IRQ_DMAC0_ERROR +#define IRQ_EPPI0_ERR IRQ_EPPI0_ERROR #define IRQ_SPORT0_ERR IRQ_SPORT0_ERROR #define IRQ_SPORT1_ERR IRQ_SPORT1_ERROR -#define IRQ_SPI0_ERR IRQ_SPI0_ERROR -#define IRQ_UART0_ERR IRQ_UART0_ERROR -#define IRQ_DMAC1_ERR IRQ_DMAC1_ERROR +#define IRQ_SPI0_ERR IRQ_SPI0_ERROR +#define IRQ_UART0_ERR IRQ_UART0_ERROR +#define IRQ_DMAC1_ERR IRQ_DMAC1_ERROR #define IRQ_SPORT2_ERR IRQ_SPORT2_ERROR #define IRQ_SPORT3_ERR IRQ_SPORT3_ERROR -#define IRQ_SPI1_ERR IRQ_SPI1_ERROR -#define IRQ_SPI2_ERR IRQ_SPI2_ERROR -#define IRQ_UART1_ERR IRQ_UART1_ERROR -#define IRQ_UART2_ERR IRQ_UART2_ERROR -#define IRQ_CAN0_ERR IRQ_CAN0_ERROR -#define IRQ_MXVR_ERR IRQ_MXVR_ERROR -#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR -#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR -#define IRQ_UART3_ERR IRQ_UART3_ERROR -#define IRQ_HOST_ERR IRQ_HOST_ERROR -#define IRQ_PIXC_ERR IRQ_PIXC_ERROR -#define IRQ_NFC_ERR IRQ_NFC_ERROR -#define IRQ_ATAPI_ERR IRQ_ATAPI_ERROR -#define IRQ_CAN1_ERR IRQ_CAN1_ERROR +#define IRQ_SPI1_ERR IRQ_SPI1_ERROR +#define IRQ_SPI2_ERR IRQ_SPI2_ERROR +#define IRQ_UART1_ERR IRQ_UART1_ERROR +#define IRQ_UART2_ERR IRQ_UART2_ERROR +#define IRQ_CAN0_ERR IRQ_CAN0_ERROR +#define IRQ_MXVR_ERR IRQ_MXVR_ERROR +#define IRQ_EPPI1_ERR IRQ_EPPI1_ERROR +#define IRQ_EPPI2_ERR IRQ_EPPI2_ERROR +#define IRQ_UART3_ERR IRQ_UART3_ERROR +#define IRQ_HOST_ERR IRQ_HOST_ERROR +#define IRQ_PIXC_ERR IRQ_PIXC_ERROR +#define IRQ_NFC_ERR IRQ_NFC_ERROR +#define IRQ_ATAPI_ERR IRQ_ATAPI_ERROR +#define IRQ_CAN1_ERR IRQ_CAN1_ERROR #define IRQ_HS_DMA_ERR IRQ_HS_DMA_ERROR - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 - /* IAR0 BIT FIELDS */ #define IRQ_PLL_WAKEUP_POS 0 #define IRQ_DMAC0_ERR_POS 4 @@ -492,4 +451,4 @@ struct bfin_pint_regs { #endif -#endif /* _BF548_IRQ_H_ */ +#endif diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index f667e7704197..5067984a62e7 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -247,7 +247,15 @@ static struct mtd_partition ezkit_partitions[] = { .offset = MTDPART_OFS_APPEND, }, { .name = "file system(nor)", - .size = MTDPART_SIZ_FULL, + .size = 0x800000 - 0x40000 - 0x1C0000 - 0x2000 * 8, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "config(nor)", + .size = 0x2000 * 7, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "u-boot env(nor)", + .size = 0x2000, .offset = MTDPART_OFS_APPEND, } }; diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 6a3499b02097..22b5ab773027 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -5,13 +5,13 @@ * and can be replaced with that version at any time * DO NOT EDIT THIS FILE * - * Copyright 2004-2010 Analog Devices Inc. + * Copyright 2004-2011 Analog Devices Inc. * Licensed under the ADI BSD license. * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: - * - Revision Q, 11/07/2008; ADSP-BF561 Blackfin Processor Anomaly List + * - Revision R, 05/25/2010; ADSP-BF561 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -290,12 +290,18 @@ #define ANOMALY_05000428 (__SILICON_REVISION__ > 3) /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */ #define ANOMALY_05000443 (1) +/* SCKELOW Feature Is Not Functional */ +#define ANOMALY_05000458 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ +#define ANOMALY_05000462 (1) +/* Boot Failure When SDRAM Control Signals Toggle Coming Out Of Reset */ +#define ANOMALY_05000471 (1) /* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ #define ANOMALY_05000473 (1) /* Possible Lockup Condition whem Modifying PLL from External Memory */ -#define ANOMALY_05000475 (__SILICON_REVISION__ < 4) +#define ANOMALY_05000475 (1) /* TESTSET Instruction Cannot Be Interrupted */ #define ANOMALY_05000477 (1) /* Reads of ITEST_COMMAND and ITEST_DATA Registers Cause Cache Corruption */ @@ -314,12 +320,14 @@ #define ANOMALY_05000353 (1) #define ANOMALY_05000364 (0) #define ANOMALY_05000380 (0) +#define ANOMALY_05000383 (0) #define ANOMALY_05000386 (1) #define ANOMALY_05000389 (0) #define ANOMALY_05000400 (0) #define ANOMALY_05000430 (0) #define ANOMALY_05000432 (0) #define ANOMALY_05000435 (0) +#define ANOMALY_05000440 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) #define ANOMALY_05000456 (0) @@ -327,6 +335,7 @@ #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) #define ANOMALY_05000474 (0) +#define ANOMALY_05000480 (0) #define ANOMALY_05000485 (0) #endif diff --git a/arch/blackfin/mach-bf561/include/mach/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h index c95566ade51b..d6998520f70f 100644 --- a/arch/blackfin/mach-bf561/include/mach/irq.h +++ b/arch/blackfin/mach-bf561/include/mach/irq.h @@ -7,212 +7,98 @@ #ifndef _BF561_IRQ_H_ #define _BF561_IRQ_H_ -/*********************************************************************** - * Interrupt source definitions: - Event Source Core Event Name IRQ No - (highest priority) - Emulation Events EMU 0 - Reset RST 1 - NMI NMI 2 - Exception EVX 3 - Reserved -- 4 - Hardware Error IVHW 5 - Core Timer IVTMR 6 * - - PLL Wakeup Interrupt IVG7 7 - DMA1 Error (generic) IVG7 8 - DMA2 Error (generic) IVG7 9 - IMDMA Error (generic) IVG7 10 - PPI1 Error Interrupt IVG7 11 - PPI2 Error Interrupt IVG7 12 - SPORT0 Error Interrupt IVG7 13 - SPORT1 Error Interrupt IVG7 14 - SPI Error Interrupt IVG7 15 - UART Error Interrupt IVG7 16 - Reserved Interrupt IVG7 17 - - DMA1 0 Interrupt(PPI1) IVG8 18 - DMA1 1 Interrupt(PPI2) IVG8 19 - DMA1 2 Interrupt IVG8 20 - DMA1 3 Interrupt IVG8 21 - DMA1 4 Interrupt IVG8 22 - DMA1 5 Interrupt IVG8 23 - DMA1 6 Interrupt IVG8 24 - DMA1 7 Interrupt IVG8 25 - DMA1 8 Interrupt IVG8 26 - DMA1 9 Interrupt IVG8 27 - DMA1 10 Interrupt IVG8 28 - DMA1 11 Interrupt IVG8 29 - - DMA2 0 (SPORT0 RX) IVG9 30 - DMA2 1 (SPORT0 TX) IVG9 31 - DMA2 2 (SPORT1 RX) IVG9 32 - DMA2 3 (SPORT2 TX) IVG9 33 - DMA2 4 (SPI) IVG9 34 - DMA2 5 (UART RX) IVG9 35 - DMA2 6 (UART TX) IVG9 36 - DMA2 7 Interrupt IVG9 37 - DMA2 8 Interrupt IVG9 38 - DMA2 9 Interrupt IVG9 39 - DMA2 10 Interrupt IVG9 40 - DMA2 11 Interrupt IVG9 41 - - TIMER 0 Interrupt IVG10 42 - TIMER 1 Interrupt IVG10 43 - TIMER 2 Interrupt IVG10 44 - TIMER 3 Interrupt IVG10 45 - TIMER 4 Interrupt IVG10 46 - TIMER 5 Interrupt IVG10 47 - TIMER 6 Interrupt IVG10 48 - TIMER 7 Interrupt IVG10 49 - TIMER 8 Interrupt IVG10 50 - TIMER 9 Interrupt IVG10 51 - TIMER 10 Interrupt IVG10 52 - TIMER 11 Interrupt IVG10 53 - - Programmable Flags0 A (8) IVG11 54 - Programmable Flags0 B (8) IVG11 55 - Programmable Flags1 A (8) IVG11 56 - Programmable Flags1 B (8) IVG11 57 - Programmable Flags2 A (8) IVG11 58 - Programmable Flags2 B (8) IVG11 59 - - MDMA1 0 write/read INT IVG8 60 - MDMA1 1 write/read INT IVG8 61 - - MDMA2 0 write/read INT IVG9 62 - MDMA2 1 write/read INT IVG9 63 - - IMDMA 0 write/read INT IVG12 64 - IMDMA 1 write/read INT IVG12 65 - - Watch Dog Timer IVG13 66 - - Reserved interrupt IVG7 67 - Reserved interrupt IVG7 68 - Supplemental interrupt 0 IVG7 69 - supplemental interrupt 1 IVG7 70 - - Softirq IVG14 - System Call -- - (lowest priority) IVG15 - - **********************************************************************/ - -#define SYS_IRQS 71 -#define NR_PERI_INTS 64 - -/* - * The ABSTRACT IRQ definitions - * the first seven of the following are fixed, - * the rest you change if you need to. - */ -/* IVG 0-6*/ -#define IRQ_EMU 0 /* Emulation */ -#define IRQ_RST 1 /* Reset */ -#define IRQ_NMI 2 /* Non Maskable Interrupt */ -#define IRQ_EVX 3 /* Exception */ -#define IRQ_UNUSED 4 /* Reserved interrupt */ -#define IRQ_HWERR 5 /* Hardware Error */ -#define IRQ_CORETMR 6 /* Core timer */ - -#define IVG_BASE 7 -/* IVG 7 */ -#define IRQ_PLL_WAKEUP (IVG_BASE + 0) /* PLL Wakeup Interrupt */ -#define IRQ_DMA1_ERROR (IVG_BASE + 1) /* DMA1 Error (general) */ -#define IRQ_DMA_ERROR IRQ_DMA1_ERROR /* DMA1 Error (general) */ -#define IRQ_DMA2_ERROR (IVG_BASE + 2) /* DMA2 Error (general) */ -#define IRQ_IMDMA_ERROR (IVG_BASE + 3) /* IMDMA Error Interrupt */ -#define IRQ_PPI1_ERROR (IVG_BASE + 4) /* PPI1 Error Interrupt */ -#define IRQ_PPI_ERROR IRQ_PPI1_ERROR /* PPI1 Error Interrupt */ -#define IRQ_PPI2_ERROR (IVG_BASE + 5) /* PPI2 Error Interrupt */ -#define IRQ_SPORT0_ERROR (IVG_BASE + 6) /* SPORT0 Error Interrupt */ -#define IRQ_SPORT1_ERROR (IVG_BASE + 7) /* SPORT1 Error Interrupt */ -#define IRQ_SPI_ERROR (IVG_BASE + 8) /* SPI Error Interrupt */ -#define IRQ_UART_ERROR (IVG_BASE + 9) /* UART Error Interrupt */ -#define IRQ_RESERVED_ERROR (IVG_BASE + 10) /* Reversed Interrupt */ -/* IVG 8 */ -#define IRQ_DMA1_0 (IVG_BASE + 11) /* DMA1 0 Interrupt(PPI1) */ -#define IRQ_PPI IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ -#define IRQ_PPI0 IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ -#define IRQ_DMA1_1 (IVG_BASE + 12) /* DMA1 1 Interrupt(PPI2) */ -#define IRQ_PPI1 IRQ_DMA1_1 /* DMA1 1 Interrupt(PPI2) */ -#define IRQ_DMA1_2 (IVG_BASE + 13) /* DMA1 2 Interrupt */ -#define IRQ_DMA1_3 (IVG_BASE + 14) /* DMA1 3 Interrupt */ -#define IRQ_DMA1_4 (IVG_BASE + 15) /* DMA1 4 Interrupt */ -#define IRQ_DMA1_5 (IVG_BASE + 16) /* DMA1 5 Interrupt */ -#define IRQ_DMA1_6 (IVG_BASE + 17) /* DMA1 6 Interrupt */ -#define IRQ_DMA1_7 (IVG_BASE + 18) /* DMA1 7 Interrupt */ -#define IRQ_DMA1_8 (IVG_BASE + 19) /* DMA1 8 Interrupt */ -#define IRQ_DMA1_9 (IVG_BASE + 20) /* DMA1 9 Interrupt */ -#define IRQ_DMA1_10 (IVG_BASE + 21) /* DMA1 10 Interrupt */ -#define IRQ_DMA1_11 (IVG_BASE + 22) /* DMA1 11 Interrupt */ -/* IVG 9 */ -#define IRQ_DMA2_0 (IVG_BASE + 23) /* DMA2 0 (SPORT0 RX) */ -#define IRQ_SPORT0_RX IRQ_DMA2_0 /* DMA2 0 (SPORT0 RX) */ -#define IRQ_DMA2_1 (IVG_BASE + 24) /* DMA2 1 (SPORT0 TX) */ -#define IRQ_SPORT0_TX IRQ_DMA2_1 /* DMA2 1 (SPORT0 TX) */ -#define IRQ_DMA2_2 (IVG_BASE + 25) /* DMA2 2 (SPORT1 RX) */ -#define IRQ_SPORT1_RX IRQ_DMA2_2 /* DMA2 2 (SPORT1 RX) */ -#define IRQ_DMA2_3 (IVG_BASE + 26) /* DMA2 3 (SPORT2 TX) */ -#define IRQ_SPORT1_TX IRQ_DMA2_3 /* DMA2 3 (SPORT2 TX) */ -#define IRQ_DMA2_4 (IVG_BASE + 27) /* DMA2 4 (SPI) */ -#define IRQ_SPI IRQ_DMA2_4 /* DMA2 4 (SPI) */ -#define IRQ_DMA2_5 (IVG_BASE + 28) /* DMA2 5 (UART RX) */ -#define IRQ_UART_RX IRQ_DMA2_5 /* DMA2 5 (UART RX) */ -#define IRQ_DMA2_6 (IVG_BASE + 29) /* DMA2 6 (UART TX) */ -#define IRQ_UART_TX IRQ_DMA2_6 /* DMA2 6 (UART TX) */ -#define IRQ_DMA2_7 (IVG_BASE + 30) /* DMA2 7 Interrupt */ -#define IRQ_DMA2_8 (IVG_BASE + 31) /* DMA2 8 Interrupt */ -#define IRQ_DMA2_9 (IVG_BASE + 32) /* DMA2 9 Interrupt */ -#define IRQ_DMA2_10 (IVG_BASE + 33) /* DMA2 10 Interrupt */ -#define IRQ_DMA2_11 (IVG_BASE + 34) /* DMA2 11 Interrupt */ -/* IVG 10 */ -#define IRQ_TIMER0 (IVG_BASE + 35) /* TIMER 0 Interrupt */ -#define IRQ_TIMER1 (IVG_BASE + 36) /* TIMER 1 Interrupt */ -#define IRQ_TIMER2 (IVG_BASE + 37) /* TIMER 2 Interrupt */ -#define IRQ_TIMER3 (IVG_BASE + 38) /* TIMER 3 Interrupt */ -#define IRQ_TIMER4 (IVG_BASE + 39) /* TIMER 4 Interrupt */ -#define IRQ_TIMER5 (IVG_BASE + 40) /* TIMER 5 Interrupt */ -#define IRQ_TIMER6 (IVG_BASE + 41) /* TIMER 6 Interrupt */ -#define IRQ_TIMER7 (IVG_BASE + 42) /* TIMER 7 Interrupt */ -#define IRQ_TIMER8 (IVG_BASE + 43) /* TIMER 8 Interrupt */ -#define IRQ_TIMER9 (IVG_BASE + 44) /* TIMER 9 Interrupt */ -#define IRQ_TIMER10 (IVG_BASE + 45) /* TIMER 10 Interrupt */ -#define IRQ_TIMER11 (IVG_BASE + 46) /* TIMER 11 Interrupt */ -/* IVG 11 */ -#define IRQ_PROG0_INTA (IVG_BASE + 47) /* Programmable Flags0 A (8) */ -#define IRQ_PROG_INTA IRQ_PROG0_INTA /* Programmable Flags0 A (8) */ -#define IRQ_PROG0_INTB (IVG_BASE + 48) /* Programmable Flags0 B (8) */ -#define IRQ_PROG_INTB IRQ_PROG0_INTB /* Programmable Flags0 B (8) */ -#define IRQ_PROG1_INTA (IVG_BASE + 49) /* Programmable Flags1 A (8) */ -#define IRQ_PROG1_INTB (IVG_BASE + 50) /* Programmable Flags1 B (8) */ -#define IRQ_PROG2_INTA (IVG_BASE + 51) /* Programmable Flags2 A (8) */ -#define IRQ_PROG2_INTB (IVG_BASE + 52) /* Programmable Flags2 B (8) */ -/* IVG 8 */ -#define IRQ_DMA1_WRRD0 (IVG_BASE + 53) /* MDMA1 0 write/read INT */ -#define IRQ_DMA_WRRD0 IRQ_DMA1_WRRD0 /* MDMA1 0 write/read INT */ +#include <mach-common/irq.h> + +#define NR_PERI_INTS (2 * 32) + +#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */ +#define IRQ_DMA1_ERROR BFIN_IRQ(1) /* DMA1 Error (general) */ +#define IRQ_DMA_ERROR IRQ_DMA1_ERROR /* DMA1 Error (general) */ +#define IRQ_DMA2_ERROR BFIN_IRQ(2) /* DMA2 Error (general) */ +#define IRQ_IMDMA_ERROR BFIN_IRQ(3) /* IMDMA Error Interrupt */ +#define IRQ_PPI1_ERROR BFIN_IRQ(4) /* PPI1 Error Interrupt */ +#define IRQ_PPI_ERROR IRQ_PPI1_ERROR /* PPI1 Error Interrupt */ +#define IRQ_PPI2_ERROR BFIN_IRQ(5) /* PPI2 Error Interrupt */ +#define IRQ_SPORT0_ERROR BFIN_IRQ(6) /* SPORT0 Error Interrupt */ +#define IRQ_SPORT1_ERROR BFIN_IRQ(7) /* SPORT1 Error Interrupt */ +#define IRQ_SPI_ERROR BFIN_IRQ(8) /* SPI Error Interrupt */ +#define IRQ_UART_ERROR BFIN_IRQ(9) /* UART Error Interrupt */ +#define IRQ_RESERVED_ERROR BFIN_IRQ(10) /* Reversed */ +#define IRQ_DMA1_0 BFIN_IRQ(11) /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_PPI IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_PPI0 IRQ_DMA1_0 /* DMA1 0 Interrupt(PPI1) */ +#define IRQ_DMA1_1 BFIN_IRQ(12) /* DMA1 1 Interrupt(PPI2) */ +#define IRQ_PPI1 IRQ_DMA1_1 /* DMA1 1 Interrupt(PPI2) */ +#define IRQ_DMA1_2 BFIN_IRQ(13) /* DMA1 2 Interrupt */ +#define IRQ_DMA1_3 BFIN_IRQ(14) /* DMA1 3 Interrupt */ +#define IRQ_DMA1_4 BFIN_IRQ(15) /* DMA1 4 Interrupt */ +#define IRQ_DMA1_5 BFIN_IRQ(16) /* DMA1 5 Interrupt */ +#define IRQ_DMA1_6 BFIN_IRQ(17) /* DMA1 6 Interrupt */ +#define IRQ_DMA1_7 BFIN_IRQ(18) /* DMA1 7 Interrupt */ +#define IRQ_DMA1_8 BFIN_IRQ(19) /* DMA1 8 Interrupt */ +#define IRQ_DMA1_9 BFIN_IRQ(20) /* DMA1 9 Interrupt */ +#define IRQ_DMA1_10 BFIN_IRQ(21) /* DMA1 10 Interrupt */ +#define IRQ_DMA1_11 BFIN_IRQ(22) /* DMA1 11 Interrupt */ +#define IRQ_DMA2_0 BFIN_IRQ(23) /* DMA2 0 (SPORT0 RX) */ +#define IRQ_SPORT0_RX IRQ_DMA2_0 /* DMA2 0 (SPORT0 RX) */ +#define IRQ_DMA2_1 BFIN_IRQ(24) /* DMA2 1 (SPORT0 TX) */ +#define IRQ_SPORT0_TX IRQ_DMA2_1 /* DMA2 1 (SPORT0 TX) */ +#define IRQ_DMA2_2 BFIN_IRQ(25) /* DMA2 2 (SPORT1 RX) */ +#define IRQ_SPORT1_RX IRQ_DMA2_2 /* DMA2 2 (SPORT1 RX) */ +#define IRQ_DMA2_3 BFIN_IRQ(26) /* DMA2 3 (SPORT2 TX) */ +#define IRQ_SPORT1_TX IRQ_DMA2_3 /* DMA2 3 (SPORT2 TX) */ +#define IRQ_DMA2_4 BFIN_IRQ(27) /* DMA2 4 (SPI) */ +#define IRQ_SPI IRQ_DMA2_4 /* DMA2 4 (SPI) */ +#define IRQ_DMA2_5 BFIN_IRQ(28) /* DMA2 5 (UART RX) */ +#define IRQ_UART_RX IRQ_DMA2_5 /* DMA2 5 (UART RX) */ +#define IRQ_DMA2_6 BFIN_IRQ(29) /* DMA2 6 (UART TX) */ +#define IRQ_UART_TX IRQ_DMA2_6 /* DMA2 6 (UART TX) */ +#define IRQ_DMA2_7 BFIN_IRQ(30) /* DMA2 7 Interrupt */ +#define IRQ_DMA2_8 BFIN_IRQ(31) /* DMA2 8 Interrupt */ +#define IRQ_DMA2_9 BFIN_IRQ(32) /* DMA2 9 Interrupt */ +#define IRQ_DMA2_10 BFIN_IRQ(33) /* DMA2 10 Interrupt */ +#define IRQ_DMA2_11 BFIN_IRQ(34) /* DMA2 11 Interrupt */ +#define IRQ_TIMER0 BFIN_IRQ(35) /* TIMER 0 Interrupt */ +#define IRQ_TIMER1 BFIN_IRQ(36) /* TIMER 1 Interrupt */ +#define IRQ_TIMER2 BFIN_IRQ(37) /* TIMER 2 Interrupt */ +#define IRQ_TIMER3 BFIN_IRQ(38) /* TIMER 3 Interrupt */ +#define IRQ_TIMER4 BFIN_IRQ(39) /* TIMER 4 Interrupt */ +#define IRQ_TIMER5 BFIN_IRQ(40) /* TIMER 5 Interrupt */ +#define IRQ_TIMER6 BFIN_IRQ(41) /* TIMER 6 Interrupt */ +#define IRQ_TIMER7 BFIN_IRQ(42) /* TIMER 7 Interrupt */ +#define IRQ_TIMER8 BFIN_IRQ(43) /* TIMER 8 Interrupt */ +#define IRQ_TIMER9 BFIN_IRQ(44) /* TIMER 9 Interrupt */ +#define IRQ_TIMER10 BFIN_IRQ(45) /* TIMER 10 Interrupt */ +#define IRQ_TIMER11 BFIN_IRQ(46) /* TIMER 11 Interrupt */ +#define IRQ_PROG0_INTA BFIN_IRQ(47) /* Programmable Flags0 A (8) */ +#define IRQ_PROG_INTA IRQ_PROG0_INTA /* Programmable Flags0 A (8) */ +#define IRQ_PROG0_INTB BFIN_IRQ(48) /* Programmable Flags0 B (8) */ +#define IRQ_PROG_INTB IRQ_PROG0_INTB /* Programmable Flags0 B (8) */ +#define IRQ_PROG1_INTA BFIN_IRQ(49) /* Programmable Flags1 A (8) */ +#define IRQ_PROG1_INTB BFIN_IRQ(50) /* Programmable Flags1 B (8) */ +#define IRQ_PROG2_INTA BFIN_IRQ(51) /* Programmable Flags2 A (8) */ +#define IRQ_PROG2_INTB BFIN_IRQ(52) /* Programmable Flags2 B (8) */ +#define IRQ_DMA1_WRRD0 BFIN_IRQ(53) /* MDMA1 0 write/read INT */ +#define IRQ_DMA_WRRD0 IRQ_DMA1_WRRD0 /* MDMA1 0 write/read INT */ #define IRQ_MEM_DMA0 IRQ_DMA1_WRRD0 -#define IRQ_DMA1_WRRD1 (IVG_BASE + 54) /* MDMA1 1 write/read INT */ -#define IRQ_DMA_WRRD1 IRQ_DMA1_WRRD1 /* MDMA1 1 write/read INT */ +#define IRQ_DMA1_WRRD1 BFIN_IRQ(54) /* MDMA1 1 write/read INT */ +#define IRQ_DMA_WRRD1 IRQ_DMA1_WRRD1 /* MDMA1 1 write/read INT */ #define IRQ_MEM_DMA1 IRQ_DMA1_WRRD1 -/* IVG 9 */ -#define IRQ_DMA2_WRRD0 (IVG_BASE + 55) /* MDMA2 0 write/read INT */ +#define IRQ_DMA2_WRRD0 BFIN_IRQ(55) /* MDMA2 0 write/read INT */ #define IRQ_MEM_DMA2 IRQ_DMA2_WRRD0 -#define IRQ_DMA2_WRRD1 (IVG_BASE + 56) /* MDMA2 1 write/read INT */ +#define IRQ_DMA2_WRRD1 BFIN_IRQ(56) /* MDMA2 1 write/read INT */ #define IRQ_MEM_DMA3 IRQ_DMA2_WRRD1 -/* IVG 12 */ -#define IRQ_IMDMA_WRRD0 (IVG_BASE + 57) /* IMDMA 0 write/read INT */ +#define IRQ_IMDMA_WRRD0 BFIN_IRQ(57) /* IMDMA 0 write/read INT */ #define IRQ_IMEM_DMA0 IRQ_IMDMA_WRRD0 -#define IRQ_IMDMA_WRRD1 (IVG_BASE + 58) /* IMDMA 1 write/read INT */ +#define IRQ_IMDMA_WRRD1 BFIN_IRQ(58) /* IMDMA 1 write/read INT */ #define IRQ_IMEM_DMA1 IRQ_IMDMA_WRRD1 -/* IVG 13 */ -#define IRQ_WATCH (IVG_BASE + 59) /* Watch Dog Timer */ -/* IVG 7 */ -#define IRQ_RESERVED_1 (IVG_BASE + 60) /* Reserved interrupt */ -#define IRQ_RESERVED_2 (IVG_BASE + 61) /* Reserved interrupt */ -#define IRQ_SUPPLE_0 (IVG_BASE + 62) /* Supplemental interrupt 0 */ -#define IRQ_SUPPLE_1 (IVG_BASE + 63) /* supplemental interrupt 1 */ +#define IRQ_WATCH BFIN_IRQ(59) /* Watch Dog Timer */ +#define IRQ_RESERVED_1 BFIN_IRQ(60) /* Reserved interrupt */ +#define IRQ_RESERVED_2 BFIN_IRQ(61) /* Reserved interrupt */ +#define IRQ_SUPPLE_0 BFIN_IRQ(62) /* Supplemental interrupt 0 */ +#define IRQ_SUPPLE_1 BFIN_IRQ(63) /* supplemental interrupt 1 */ + +#define SYS_IRQS 71 #define IRQ_PF0 73 #define IRQ_PF1 74 @@ -266,158 +152,85 @@ #define GPIO_IRQ_BASE IRQ_PF0 #define NR_MACH_IRQS (IRQ_PF47 + 1) -#define NR_IRQS (NR_MACH_IRQS + NR_SPARE_IRQS) - -#define IVG7 7 -#define IVG8 8 -#define IVG9 9 -#define IVG10 10 -#define IVG11 11 -#define IVG12 12 -#define IVG13 13 -#define IVG14 14 -#define IVG15 15 - -/* - * DEFAULT PRIORITIES: - */ - -#define CONFIG_DEF_PLL_WAKEUP 7 -#define CONFIG_DEF_DMA1_ERROR 7 -#define CONFIG_DEF_DMA2_ERROR 7 -#define CONFIG_DEF_IMDMA_ERROR 7 -#define CONFIG_DEF_PPI1_ERROR 7 -#define CONFIG_DEF_PPI2_ERROR 7 -#define CONFIG_DEF_SPORT0_ERROR 7 -#define CONFIG_DEF_SPORT1_ERROR 7 -#define CONFIG_DEF_SPI_ERROR 7 -#define CONFIG_DEF_UART_ERROR 7 -#define CONFIG_DEF_RESERVED_ERROR 7 -#define CONFIG_DEF_DMA1_0 8 -#define CONFIG_DEF_DMA1_1 8 -#define CONFIG_DEF_DMA1_2 8 -#define CONFIG_DEF_DMA1_3 8 -#define CONFIG_DEF_DMA1_4 8 -#define CONFIG_DEF_DMA1_5 8 -#define CONFIG_DEF_DMA1_6 8 -#define CONFIG_DEF_DMA1_7 8 -#define CONFIG_DEF_DMA1_8 8 -#define CONFIG_DEF_DMA1_9 8 -#define CONFIG_DEF_DMA1_10 8 -#define CONFIG_DEF_DMA1_11 8 -#define CONFIG_DEF_DMA2_0 9 -#define CONFIG_DEF_DMA2_1 9 -#define CONFIG_DEF_DMA2_2 9 -#define CONFIG_DEF_DMA2_3 9 -#define CONFIG_DEF_DMA2_4 9 -#define CONFIG_DEF_DMA2_5 9 -#define CONFIG_DEF_DMA2_6 9 -#define CONFIG_DEF_DMA2_7 9 -#define CONFIG_DEF_DMA2_8 9 -#define CONFIG_DEF_DMA2_9 9 -#define CONFIG_DEF_DMA2_10 9 -#define CONFIG_DEF_DMA2_11 9 -#define CONFIG_DEF_TIMER0 10 -#define CONFIG_DEF_TIMER1 10 -#define CONFIG_DEF_TIMER2 10 -#define CONFIG_DEF_TIMER3 10 -#define CONFIG_DEF_TIMER4 10 -#define CONFIG_DEF_TIMER5 10 -#define CONFIG_DEF_TIMER6 10 -#define CONFIG_DEF_TIMER7 10 -#define CONFIG_DEF_TIMER8 10 -#define CONFIG_DEF_TIMER9 10 -#define CONFIG_DEF_TIMER10 10 -#define CONFIG_DEF_TIMER11 10 -#define CONFIG_DEF_PROG0_INTA 11 -#define CONFIG_DEF_PROG0_INTB 11 -#define CONFIG_DEF_PROG1_INTA 11 -#define CONFIG_DEF_PROG1_INTB 11 -#define CONFIG_DEF_PROG2_INTA 11 -#define CONFIG_DEF_PROG2_INTB 11 -#define CONFIG_DEF_DMA1_WRRD0 8 -#define CONFIG_DEF_DMA1_WRRD1 8 -#define CONFIG_DEF_DMA2_WRRD0 9 -#define CONFIG_DEF_DMA2_WRRD1 9 -#define CONFIG_DEF_IMDMA_WRRD0 12 -#define CONFIG_DEF_IMDMA_WRRD1 12 -#define CONFIG_DEF_WATCH 13 -#define CONFIG_DEF_RESERVED_1 7 -#define CONFIG_DEF_RESERVED_2 7 -#define CONFIG_DEF_SUPPLE_0 7 -#define CONFIG_DEF_SUPPLE_1 7 /* IAR0 BIT FIELDS */ -#define IRQ_PLL_WAKEUP_POS 0 -#define IRQ_DMA1_ERROR_POS 4 -#define IRQ_DMA2_ERROR_POS 8 -#define IRQ_IMDMA_ERROR_POS 12 -#define IRQ_PPI0_ERROR_POS 16 -#define IRQ_PPI1_ERROR_POS 20 -#define IRQ_SPORT0_ERROR_POS 24 -#define IRQ_SPORT1_ERROR_POS 28 +#define IRQ_PLL_WAKEUP_POS 0 +#define IRQ_DMA1_ERROR_POS 4 +#define IRQ_DMA2_ERROR_POS 8 +#define IRQ_IMDMA_ERROR_POS 12 +#define IRQ_PPI0_ERROR_POS 16 +#define IRQ_PPI1_ERROR_POS 20 +#define IRQ_SPORT0_ERROR_POS 24 +#define IRQ_SPORT1_ERROR_POS 28 + /* IAR1 BIT FIELDS */ -#define IRQ_SPI_ERROR_POS 0 -#define IRQ_UART_ERROR_POS 4 -#define IRQ_RESERVED_ERROR_POS 8 -#define IRQ_DMA1_0_POS 12 -#define IRQ_DMA1_1_POS 16 -#define IRQ_DMA1_2_POS 20 -#define IRQ_DMA1_3_POS 24 -#define IRQ_DMA1_4_POS 28 +#define IRQ_SPI_ERROR_POS 0 +#define IRQ_UART_ERROR_POS 4 +#define IRQ_RESERVED_ERROR_POS 8 +#define IRQ_DMA1_0_POS 12 +#define IRQ_DMA1_1_POS 16 +#define IRQ_DMA1_2_POS 20 +#define IRQ_DMA1_3_POS 24 +#define IRQ_DMA1_4_POS 28 + /* IAR2 BIT FIELDS */ -#define IRQ_DMA1_5_POS 0 -#define IRQ_DMA1_6_POS 4 -#define IRQ_DMA1_7_POS 8 -#define IRQ_DMA1_8_POS 12 -#define IRQ_DMA1_9_POS 16 -#define IRQ_DMA1_10_POS 20 -#define IRQ_DMA1_11_POS 24 -#define IRQ_DMA2_0_POS 28 +#define IRQ_DMA1_5_POS 0 +#define IRQ_DMA1_6_POS 4 +#define IRQ_DMA1_7_POS 8 +#define IRQ_DMA1_8_POS 12 +#define IRQ_DMA1_9_POS 16 +#define IRQ_DMA1_10_POS 20 +#define IRQ_DMA1_11_POS 24 +#define IRQ_DMA2_0_POS 28 + /* IAR3 BIT FIELDS */ -#define IRQ_DMA2_1_POS 0 -#define IRQ_DMA2_2_POS 4 -#define IRQ_DMA2_3_POS 8 -#define IRQ_DMA2_4_POS 12 -#define IRQ_DMA2_5_POS 16 -#define IRQ_DMA2_6_POS 20 -#define IRQ_DMA2_7_POS 24 -#define IRQ_DMA2_8_POS 28 +#define IRQ_DMA2_1_POS 0 +#define IRQ_DMA2_2_POS 4 +#define IRQ_DMA2_3_POS 8 +#define IRQ_DMA2_4_POS 12 +#define IRQ_DMA2_5_POS 16 +#define IRQ_DMA2_6_POS 20 +#define IRQ_DMA2_7_POS 24 +#define IRQ_DMA2_8_POS 28 + /* IAR4 BIT FIELDS */ -#define IRQ_DMA2_9_POS 0 -#define IRQ_DMA2_10_POS 4 -#define IRQ_DMA2_11_POS 8 -#define IRQ_TIMER0_POS 12 -#define IRQ_TIMER1_POS 16 -#define IRQ_TIMER2_POS 20 -#define IRQ_TIMER3_POS 24 -#define IRQ_TIMER4_POS 28 +#define IRQ_DMA2_9_POS 0 +#define IRQ_DMA2_10_POS 4 +#define IRQ_DMA2_11_POS 8 +#define IRQ_TIMER0_POS 12 +#define IRQ_TIMER1_POS 16 +#define IRQ_TIMER2_POS 20 +#define IRQ_TIMER3_POS 24 +#define IRQ_TIMER4_POS 28 + /* IAR5 BIT FIELDS */ -#define IRQ_TIMER5_POS 0 -#define IRQ_TIMER6_POS 4 -#define IRQ_TIMER7_POS 8 -#define IRQ_TIMER8_POS 12 -#define IRQ_TIMER9_POS 16 -#define IRQ_TIMER10_POS 20 -#define IRQ_TIMER11_POS 24 -#define IRQ_PROG0_INTA_POS 28 +#define IRQ_TIMER5_POS 0 +#define IRQ_TIMER6_POS 4 +#define IRQ_TIMER7_POS 8 +#define IRQ_TIMER8_POS 12 +#define IRQ_TIMER9_POS 16 +#define IRQ_TIMER10_POS 20 +#define IRQ_TIMER11_POS 24 +#define IRQ_PROG0_INTA_POS 28 + /* IAR6 BIT FIELDS */ -#define IRQ_PROG0_INTB_POS 0 -#define IRQ_PROG1_INTA_POS 4 -#define IRQ_PROG1_INTB_POS 8 -#define IRQ_PROG2_INTA_POS 12 -#define IRQ_PROG2_INTB_POS 16 -#define IRQ_DMA1_WRRD0_POS 20 -#define IRQ_DMA1_WRRD1_POS 24 -#define IRQ_DMA2_WRRD0_POS 28 -/* IAR7 BIT FIELDS */ -#define IRQ_DMA2_WRRD1_POS 0 -#define IRQ_IMDMA_WRRD0_POS 4 -#define IRQ_IMDMA_WRRD1_POS 8 -#define IRQ_WDTIMER_POS 12 -#define IRQ_RESERVED_1_POS 16 -#define IRQ_RESERVED_2_POS 20 -#define IRQ_SUPPLE_0_POS 24 -#define IRQ_SUPPLE_1_POS 28 +#define IRQ_PROG0_INTB_POS 0 +#define IRQ_PROG1_INTA_POS 4 +#define IRQ_PROG1_INTB_POS 8 +#define IRQ_PROG2_INTA_POS 12 +#define IRQ_PROG2_INTB_POS 16 +#define IRQ_DMA1_WRRD0_POS 20 +#define IRQ_DMA1_WRRD1_POS 24 +#define IRQ_DMA2_WRRD0_POS 28 -#endif /* _BF561_IRQ_H_ */ +/* IAR7 BIT FIELDS */ +#define IRQ_DMA2_WRRD1_POS 0 +#define IRQ_IMDMA_WRRD0_POS 4 +#define IRQ_IMDMA_WRRD1_POS 8 +#define IRQ_WDTIMER_POS 12 +#define IRQ_RESERVED_1_POS 16 +#define IRQ_RESERVED_2_POS 20 +#define IRQ_SUPPLE_0_POS 24 +#define IRQ_SUPPLE_1_POS 28 + +#endif diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 7b07740cf68c..85abd8be1343 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -24,17 +24,23 @@ static DEFINE_SPINLOCK(boot_lock); void __init platform_init_cpus(void) { - cpu_set(0, cpu_possible_map); /* CoreA */ - cpu_set(1, cpu_possible_map); /* CoreB */ + struct cpumask mask; + + cpumask_set_cpu(0, &mask); /* CoreA */ + cpumask_set_cpu(1, &mask); /* CoreB */ + init_cpu_possible(&mask); } void __init platform_prepare_cpus(unsigned int max_cpus) { + struct cpumask mask; + bfin_relocate_coreb_l1_mem(); /* Both cores ought to be present on a bf561! */ - cpu_set(0, cpu_present_map); /* CoreA */ - cpu_set(1, cpu_present_map); /* CoreB */ + cpumask_set_cpu(0, &mask); /* CoreA */ + cpumask_set_cpu(1, &mask); /* CoreB */ + init_cpu_present(&mask); } int __init setup_profiling_timer(unsigned int multiplier) /* not supported */ @@ -62,9 +68,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) bfin_write_SICB_IWR1(IWR_DISABLE_ALL); SSYNC(); - /* Store CPU-private information to the cpu_data array. */ - bfin_setup_cpudata(cpu); - /* We are done with local CPU inits, unblock the boot CPU. */ set_cpu_online(cpu, true); spin_lock(&boot_lock); diff --git a/arch/blackfin/mach-common/dpmc.c b/arch/blackfin/mach-common/dpmc.c index 5e4112e518a9..f5685a496c58 100644 --- a/arch/blackfin/mach-common/dpmc.c +++ b/arch/blackfin/mach-common/dpmc.c @@ -85,10 +85,11 @@ static void bfin_wakeup_cpu(void) { unsigned int cpu; unsigned int this_cpu = smp_processor_id(); - cpumask_t mask = cpu_online_map; + cpumask_t mask; - cpu_clear(this_cpu, mask); - for_each_cpu_mask(cpu, mask) + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(this_cpu, &mask); + for_each_cpu(cpu, &mask) platform_send_ipi_cpu(cpu, IRQ_SUPPLE_0); } diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 43d9fb195c1e..1177369f9922 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -19,32 +19,14 @@ #ifdef CONFIG_IPIPE #include <linux/ipipe.h> #endif -#ifdef CONFIG_KGDB -#include <linux/kgdb.h> -#endif #include <asm/traps.h> #include <asm/blackfin.h> #include <asm/gpio.h> #include <asm/irq_handler.h> #include <asm/dpmc.h> -#include <asm/bfin5xx_spi.h> -#include <asm/bfin_sport.h> -#include <asm/bfin_can.h> #define SIC_SYSIRQ(irq) (irq - (IRQ_CORETMR + 1)) -#ifdef BF537_FAMILY -# define BF537_GENERIC_ERROR_INT_DEMUX -# define SPI_ERR_MASK (BIT_STAT_TXCOL | BIT_STAT_RBSY | BIT_STAT_MODF | BIT_STAT_TXE) /* SPI_STAT */ -# define SPORT_ERR_MASK (ROVF | RUVF | TOVF | TUVF) /* SPORT_STAT */ -# define PPI_ERR_MASK (0xFFFF & ~FLD) /* PPI_STATUS */ -# define EMAC_ERR_MASK (PHYINT | MMCINT | RXFSINT | TXFSINT | WAKEDET | RXDMAERR | TXDMAERR | STMDONE) /* EMAC_SYSTAT */ -# define UART_ERR_MASK (0x6) /* UART_IIR */ -# define CAN_ERR_MASK (EWTIF | EWRIF | EPIF | BOIF | WUIF | UIAIF | AAIF | RMLIF | UCEIF | EXTIF | ADIF) /* CAN_GIF */ -#else -# undef BF537_GENERIC_ERROR_INT_DEMUX -#endif - /* * NOTES: * - we have separated the physical Hardware interrupt from the @@ -63,22 +45,19 @@ unsigned long bfin_irq_flags = 0x1f; EXPORT_SYMBOL(bfin_irq_flags); #endif -/* The number of spurious interrupts */ -atomic_t num_spurious; - #ifdef CONFIG_PM unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ unsigned vr_wakeup; #endif -struct ivgx { +static struct ivgx { /* irq number for request_irq, available in mach-bf5xx/irq.h */ unsigned int irqno; /* corresponding bit in the SIC_ISR register */ unsigned int isrflag; } ivg_table[NR_PERI_INTS]; -struct ivg_slice { +static struct ivg_slice { /* position of first irq in ivg_table for given ivg */ struct ivgx *ifirst; struct ivgx *istop; @@ -125,7 +104,7 @@ static void __init search_IAR(void) * This is for core internal IRQs */ -static void bfin_ack_noop(struct irq_data *d) +void bfin_ack_noop(struct irq_data *d) { /* Dummy function. */ } @@ -154,26 +133,24 @@ static void bfin_core_unmask_irq(struct irq_data *d) return; } -static void bfin_internal_mask_irq(unsigned int irq) +void bfin_internal_mask_irq(unsigned int irq) { - unsigned long flags; + unsigned long flags = hard_local_irq_save(); -#ifdef CONFIG_BF53x - flags = hard_local_irq_save(); - bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & - ~(1 << SIC_SYSIRQ(irq))); -#else - unsigned mask_bank, mask_bit; - flags = hard_local_irq_save(); - mask_bank = SIC_SYSIRQ(irq) / 32; - mask_bit = SIC_SYSIRQ(irq) % 32; +#ifdef SIC_IMASK0 + unsigned mask_bank = SIC_SYSIRQ(irq) / 32; + unsigned mask_bit = SIC_SYSIRQ(irq) % 32; bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) & ~(1 << mask_bit)); -#ifdef CONFIG_SMP +# ifdef CONFIG_SMP bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) & ~(1 << mask_bit)); +# endif +#else + bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() & + ~(1 << SIC_SYSIRQ(irq))); #endif -#endif + hard_local_irq_restore(flags); } @@ -186,33 +163,31 @@ static void bfin_internal_mask_irq_chip(struct irq_data *d) static void bfin_internal_unmask_irq_affinity(unsigned int irq, const struct cpumask *affinity) #else -static void bfin_internal_unmask_irq(unsigned int irq) +void bfin_internal_unmask_irq(unsigned int irq) #endif { - unsigned long flags; + unsigned long flags = hard_local_irq_save(); -#ifdef CONFIG_BF53x - flags = hard_local_irq_save(); - bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | - (1 << SIC_SYSIRQ(irq))); -#else - unsigned mask_bank, mask_bit; - flags = hard_local_irq_save(); - mask_bank = SIC_SYSIRQ(irq) / 32; - mask_bit = SIC_SYSIRQ(irq) % 32; -#ifdef CONFIG_SMP +#ifdef SIC_IMASK0 + unsigned mask_bank = SIC_SYSIRQ(irq) / 32; + unsigned mask_bit = SIC_SYSIRQ(irq) % 32; +# ifdef CONFIG_SMP if (cpumask_test_cpu(0, affinity)) -#endif +# endif bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) | (1 << mask_bit)); -#ifdef CONFIG_SMP +# ifdef CONFIG_SMP if (cpumask_test_cpu(1, affinity)) bfin_write_SICB_IMASK(mask_bank, bfin_read_SICB_IMASK(mask_bank) | (1 << mask_bit)); +# endif +#else + bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | + (1 << SIC_SYSIRQ(irq))); #endif -#endif + hard_local_irq_restore(flags); } @@ -295,6 +270,8 @@ static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state) { return bfin_internal_set_wake(d->irq, state); } +#else +# define bfin_internal_set_wake_chip NULL #endif static struct irq_chip bfin_core_irqchip = { @@ -315,12 +292,10 @@ static struct irq_chip bfin_internal_irqchip = { #ifdef CONFIG_SMP .irq_set_affinity = bfin_internal_set_affinity, #endif -#ifdef CONFIG_PM .irq_set_wake = bfin_internal_set_wake_chip, -#endif }; -static void bfin_handle_irq(unsigned irq) +void bfin_handle_irq(unsigned irq) { #ifdef CONFIG_IPIPE struct pt_regs regs; /* Contents not used. */ @@ -332,102 +307,6 @@ static void bfin_handle_irq(unsigned irq) #endif /* !CONFIG_IPIPE */ } -#ifdef BF537_GENERIC_ERROR_INT_DEMUX -static int error_int_mask; - -static void bfin_generic_error_mask_irq(struct irq_data *d) -{ - error_int_mask &= ~(1L << (d->irq - IRQ_PPI_ERROR)); - if (!error_int_mask) - bfin_internal_mask_irq(IRQ_GENERIC_ERROR); -} - -static void bfin_generic_error_unmask_irq(struct irq_data *d) -{ - bfin_internal_unmask_irq(IRQ_GENERIC_ERROR); - error_int_mask |= 1L << (d->irq - IRQ_PPI_ERROR); -} - -static struct irq_chip bfin_generic_error_irqchip = { - .name = "ERROR", - .irq_ack = bfin_ack_noop, - .irq_mask_ack = bfin_generic_error_mask_irq, - .irq_mask = bfin_generic_error_mask_irq, - .irq_unmask = bfin_generic_error_unmask_irq, -}; - -static void bfin_demux_error_irq(unsigned int int_err_irq, - struct irq_desc *inta_desc) -{ - int irq = 0; - -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) - if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK) - irq = IRQ_MAC_ERROR; - else -#endif - if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK) - irq = IRQ_SPORT0_ERROR; - else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK) - irq = IRQ_SPORT1_ERROR; - else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK) - irq = IRQ_PPI_ERROR; - else if (bfin_read_CAN_GIF() & CAN_ERR_MASK) - irq = IRQ_CAN_ERROR; - else if (bfin_read_SPI_STAT() & SPI_ERR_MASK) - irq = IRQ_SPI_ERROR; - else if ((bfin_read_UART0_IIR() & UART_ERR_MASK) == UART_ERR_MASK) - irq = IRQ_UART0_ERROR; - else if ((bfin_read_UART1_IIR() & UART_ERR_MASK) == UART_ERR_MASK) - irq = IRQ_UART1_ERROR; - - if (irq) { - if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) - bfin_handle_irq(irq); - else { - - switch (irq) { - case IRQ_PPI_ERROR: - bfin_write_PPI_STATUS(PPI_ERR_MASK); - break; -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) - case IRQ_MAC_ERROR: - bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK); - break; -#endif - case IRQ_SPORT0_ERROR: - bfin_write_SPORT0_STAT(SPORT_ERR_MASK); - break; - - case IRQ_SPORT1_ERROR: - bfin_write_SPORT1_STAT(SPORT_ERR_MASK); - break; - - case IRQ_CAN_ERROR: - bfin_write_CAN_GIS(CAN_ERR_MASK); - break; - - case IRQ_SPI_ERROR: - bfin_write_SPI_STAT(SPI_ERR_MASK); - break; - - default: - break; - } - - pr_debug("IRQ %d:" - " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n", - irq); - } - } else - printk(KERN_ERR - "%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR" - " INTERRUPT ASSERTED BUT NO SOURCE FOUND\n", - __func__, __FILE__, __LINE__); - -} -#endif /* BF537_GENERIC_ERROR_INT_DEMUX */ - #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) static int mac_stat_int_mask; @@ -468,7 +347,7 @@ static void bfin_mac_status_mask_irq(struct irq_data *d) unsigned int irq = d->irq; mac_stat_int_mask &= ~(1L << (irq - IRQ_MAC_PHYINT)); -#ifdef BF537_GENERIC_ERROR_INT_DEMUX +#ifdef BF537_FAMILY switch (irq) { case IRQ_MAC_PHYINT: bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() & ~PHYIE); @@ -487,7 +366,7 @@ static void bfin_mac_status_unmask_irq(struct irq_data *d) { unsigned int irq = d->irq; -#ifdef BF537_GENERIC_ERROR_INT_DEMUX +#ifdef BF537_FAMILY switch (irq) { case IRQ_MAC_PHYINT: bfin_write_EMAC_SYSCTL(bfin_read_EMAC_SYSCTL() | PHYIE); @@ -505,12 +384,14 @@ static void bfin_mac_status_unmask_irq(struct irq_data *d) #ifdef CONFIG_PM int bfin_mac_status_set_wake(struct irq_data *d, unsigned int state) { -#ifdef BF537_GENERIC_ERROR_INT_DEMUX +#ifdef BF537_FAMILY return bfin_internal_set_wake(IRQ_GENERIC_ERROR, state); #else return bfin_internal_set_wake(IRQ_MAC_ERROR, state); #endif } +#else +# define bfin_mac_status_set_wake NULL #endif static struct irq_chip bfin_mac_status_irqchip = { @@ -519,13 +400,11 @@ static struct irq_chip bfin_mac_status_irqchip = { .irq_mask_ack = bfin_mac_status_mask_irq, .irq_mask = bfin_mac_status_mask_irq, .irq_unmask = bfin_mac_status_unmask_irq, -#ifdef CONFIG_PM .irq_set_wake = bfin_mac_status_set_wake, -#endif }; -static void bfin_demux_mac_status_irq(unsigned int int_err_irq, - struct irq_desc *inta_desc) +void bfin_demux_mac_status_irq(unsigned int int_err_irq, + struct irq_desc *inta_desc) { int i, irq = 0; u32 status = bfin_read_EMAC_SYSTAT(); @@ -680,29 +559,48 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) } #ifdef CONFIG_PM -int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) +static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) { return gpio_pm_wakeup_ctrl(irq_to_gpio(d->irq), state); } +#else +# define bfin_gpio_set_wake NULL #endif -static void bfin_demux_gpio_irq(unsigned int inta_irq, - struct irq_desc *desc) +static void bfin_demux_gpio_block(unsigned int irq) { - unsigned int i, gpio, mask, irq, search = 0; + unsigned int gpio, mask; + + gpio = irq_to_gpio(irq); + mask = get_gpiop_data(gpio) & get_gpiop_maska(gpio); + + while (mask) { + if (mask & 1) + bfin_handle_irq(irq); + irq++; + mask >>= 1; + } +} + +void bfin_demux_gpio_irq(unsigned int inta_irq, + struct irq_desc *desc) +{ + unsigned int irq; switch (inta_irq) { -#if defined(CONFIG_BF53x) - case IRQ_PROG_INTA: - irq = IRQ_PF0; - search = 1; +#if defined(BF537_FAMILY) + case IRQ_PF_INTA_PG_INTA: + bfin_demux_gpio_block(IRQ_PF0); + irq = IRQ_PG0; break; -# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) - case IRQ_MAC_RX: + case IRQ_PH_INTA_MAC_RX: irq = IRQ_PH0; break; -# endif -#elif defined(CONFIG_BF538) || defined(CONFIG_BF539) +#elif defined(BF533_FAMILY) + case IRQ_PROG_INTA: + irq = IRQ_PF0; + break; +#elif defined(BF538_FAMILY) case IRQ_PORTF_INTA: irq = IRQ_PF0; break; @@ -732,31 +630,7 @@ static void bfin_demux_gpio_irq(unsigned int inta_irq, return; } - if (search) { - for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { - irq += i; - - mask = get_gpiop_data(i) & get_gpiop_maska(i); - - while (mask) { - if (mask & 1) - bfin_handle_irq(irq); - irq++; - mask >>= 1; - } - } - } else { - gpio = irq_to_gpio(irq); - mask = get_gpiop_data(gpio) & get_gpiop_maska(gpio); - - do { - if (mask & 1) - bfin_handle_irq(irq); - irq++; - mask >>= 1; - } while (mask); - } - + bfin_demux_gpio_block(irq); } #else /* CONFIG_BF54x */ @@ -974,15 +848,11 @@ static int bfin_gpio_irq_type(struct irq_data *d, unsigned int type) } #ifdef CONFIG_PM -u32 pint_saved_masks[NR_PINT_SYS_IRQS]; -u32 pint_wakeup_masks[NR_PINT_SYS_IRQS]; - -int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) +static int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) { u32 pint_irq; u32 pint_val = irq2pint_lut[d->irq - SYS_IRQS]; u32 bank = PINT_2_BANK(pint_val); - u32 pintbit = PINT_BIT(pint_val); switch (bank) { case 0: @@ -1003,46 +873,14 @@ int bfin_gpio_set_wake(struct irq_data *d, unsigned int state) bfin_internal_set_wake(pint_irq, state); - if (state) - pint_wakeup_masks[bank] |= pintbit; - else - pint_wakeup_masks[bank] &= ~pintbit; - return 0; } - -u32 bfin_pm_setup(void) -{ - u32 val, i; - - for (i = 0; i < NR_PINT_SYS_IRQS; i++) { - val = pint[i]->mask_clear; - pint_saved_masks[i] = val; - if (val ^ pint_wakeup_masks[i]) { - pint[i]->mask_clear = val; - pint[i]->mask_set = pint_wakeup_masks[i]; - } - } - - return 0; -} - -void bfin_pm_restore(void) -{ - u32 i, val; - - for (i = 0; i < NR_PINT_SYS_IRQS; i++) { - val = pint_saved_masks[i]; - if (val ^ pint_wakeup_masks[i]) { - pint[i]->mask_clear = pint[i]->mask_clear; - pint[i]->mask_set = val; - } - } -} +#else +# define bfin_gpio_set_wake NULL #endif -static void bfin_demux_gpio_irq(unsigned int inta_irq, - struct irq_desc *desc) +void bfin_demux_gpio_irq(unsigned int inta_irq, + struct irq_desc *desc) { u32 bank, pint_val; u32 request, irq; @@ -1091,9 +929,7 @@ static struct irq_chip bfin_gpio_irqchip = { .irq_set_type = bfin_gpio_irq_type, .irq_startup = bfin_gpio_irq_startup, .irq_shutdown = bfin_gpio_irq_shutdown, -#ifdef CONFIG_PM .irq_set_wake = bfin_gpio_set_wake, -#endif }; void __cpuinit init_exception_vectors(void) @@ -1127,12 +963,12 @@ int __init init_arch_irq(void) { int irq; unsigned long ilat = 0; + /* Disable all the peripheral intrs - page 4-29 HW Ref manual */ -#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) \ - || defined(BF538_FAMILY) || defined(CONFIG_BF51x) +#ifdef SIC_IMASK0 bfin_write_SIC_IMASK0(SIC_UNMASK_ALL); bfin_write_SIC_IMASK1(SIC_UNMASK_ALL); -# ifdef CONFIG_BF54x +# ifdef SIC_IMASK2 bfin_write_SIC_IMASK2(SIC_UNMASK_ALL); # endif # ifdef CONFIG_SMP @@ -1145,11 +981,6 @@ int __init init_arch_irq(void) local_irq_disable(); -#if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) - /* Clear EMAC Interrupt Status bits so we can demux it later */ - bfin_write_EMAC_SYSTAT(-1); -#endif - #ifdef CONFIG_BF54x # ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; @@ -1168,11 +999,11 @@ int __init init_arch_irq(void) irq_set_chip(irq, &bfin_internal_irqchip); switch (irq) { -#if defined(CONFIG_BF53x) +#if defined(BF537_FAMILY) + case IRQ_PH_INTA_MAC_RX: + case IRQ_PF_INTA_PG_INTA: +#elif defined(BF533_FAMILY) case IRQ_PROG_INTA: -# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)) - case IRQ_MAC_RX: -# endif #elif defined(CONFIG_BF54x) case IRQ_PINT0: case IRQ_PINT1: @@ -1186,16 +1017,11 @@ int __init init_arch_irq(void) case IRQ_PROG0_INTA: case IRQ_PROG1_INTA: case IRQ_PROG2_INTA: -#elif defined(CONFIG_BF538) || defined(CONFIG_BF539) +#elif defined(BF538_FAMILY) case IRQ_PORTF_INTA: #endif irq_set_chained_handler(irq, bfin_demux_gpio_irq); break; -#ifdef BF537_GENERIC_ERROR_INT_DEMUX - case IRQ_GENERIC_ERROR: - irq_set_chained_handler(irq, bfin_demux_error_irq); - break; -#endif #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) case IRQ_MAC_ERROR: irq_set_chained_handler(irq, @@ -1213,11 +1039,10 @@ int __init init_arch_irq(void) case IRQ_CORETMR: # ifdef CONFIG_SMP irq_set_handler(irq, handle_percpu_irq); - break; # else irq_set_handler(irq, handle_simple_irq); - break; # endif + break; #endif #ifdef CONFIG_TICKSOURCE_GPTMR0 @@ -1226,26 +1051,17 @@ int __init init_arch_irq(void) break; #endif -#ifdef CONFIG_IPIPE default: +#ifdef CONFIG_IPIPE irq_set_handler(irq, handle_level_irq); - break; -#else /* !CONFIG_IPIPE */ - default: +#else irq_set_handler(irq, handle_simple_irq); +#endif break; -#endif /* !CONFIG_IPIPE */ } } -#ifdef BF537_GENERIC_ERROR_INT_DEMUX - for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) - irq_set_chip_and_handler(irq, &bfin_generic_error_irqchip, - handle_level_irq); -#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) - irq_set_chained_handler(IRQ_MAC_ERROR, bfin_demux_mac_status_irq); -#endif -#endif + init_mach_irq(); #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) for (irq = IRQ_MAC_PHYINT; irq <= IRQ_MAC_STMDONE; irq++) @@ -1307,53 +1123,54 @@ int __init init_arch_irq(void) #ifdef CONFIG_DO_IRQ_L1 __attribute__((l1_text)) #endif -void do_irq(int vec, struct pt_regs *fp) +static int vec_to_irq(int vec) { - if (vec == EVT_IVTMR_P) { - vec = IRQ_CORETMR; - } else { - struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; - struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; -#if defined(SIC_ISR0) - unsigned long sic_status[3]; + struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst; + struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop; + unsigned long sic_status[3]; + + if (likely(vec == EVT_IVTMR_P)) + return IRQ_CORETMR; - if (smp_processor_id()) { +#ifdef SIC_ISR + sic_status[0] = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); +#else + if (smp_processor_id()) { # ifdef SICB_ISR0 - /* This will be optimized out in UP mode. */ - sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0(); - sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1(); -# endif - } else { - sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); - sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); - } -# ifdef SIC_ISR2 - sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); + /* This will be optimized out in UP mode. */ + sic_status[0] = bfin_read_SICB_ISR0() & bfin_read_SICB_IMASK0(); + sic_status[1] = bfin_read_SICB_ISR1() & bfin_read_SICB_IMASK1(); # endif - for (;; ivg++) { - if (ivg >= ivg_stop) { - atomic_inc(&num_spurious); - return; - } - if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) - break; - } -#else - unsigned long sic_status; - - sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); + } else { + sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); + sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); + } +#endif +#ifdef SIC_ISR2 + sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); +#endif - for (;; ivg++) { - if (ivg >= ivg_stop) { - atomic_inc(&num_spurious); - return; - } else if (sic_status & ivg->isrflag) - break; - } + for (;; ivg++) { + if (ivg >= ivg_stop) + return -1; +#ifdef SIC_ISR + if (sic_status[0] & ivg->isrflag) +#else + if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) #endif - vec = ivg->irqno; + return ivg->irqno; } - asm_do_IRQ(vec, fp); +} + +#ifdef CONFIG_DO_IRQ_L1 +__attribute__((l1_text)) +#endif +void do_irq(int vec, struct pt_regs *fp) +{ + int irq = vec_to_irq(vec); + if (irq == -1) + return; + asm_do_IRQ(irq, fp); } #ifdef CONFIG_IPIPE @@ -1391,40 +1208,9 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst; int irq, s = 0; - if (likely(vec == EVT_IVTMR_P)) - irq = IRQ_CORETMR; - else { -#if defined(SIC_ISR0) - unsigned long sic_status[3]; - - sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); - sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1(); -# ifdef SIC_ISR2 - sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2(); -# endif - for (;; ivg++) { - if (ivg >= ivg_stop) { - atomic_inc(&num_spurious); - return 0; - } - if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) - break; - } -#else - unsigned long sic_status; - - sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); - - for (;; ivg++) { - if (ivg >= ivg_stop) { - atomic_inc(&num_spurious); - return 0; - } else if (sic_status & ivg->isrflag) - break; - } -#endif - irq = ivg->irqno; - } + irq = vec_to_irq(vec); + if (irq == -1) + return 0; if (irq == IRQ_SYSTMR) { #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_TICKSOURCE_GPTMR0) diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 1fbd94c44457..35e7e1eb0188 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -25,6 +25,7 @@ #include <linux/slab.h> #include <asm/atomic.h> #include <asm/cacheflush.h> +#include <asm/irq_handler.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -96,7 +97,7 @@ static void ipi_cpu_stop(unsigned int cpu) dump_stack(); spin_unlock(&stop_lock); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); local_irq_disable(); @@ -146,7 +147,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) */ resync_core_dcache(); #endif - cpu_clear(cpu, *msg->call_struct.waitmask); + cpumask_clear_cpu(cpu, msg->call_struct.waitmask); } } @@ -222,9 +223,10 @@ static inline void smp_send_message(cpumask_t callmap, unsigned long type, struct ipi_message_queue *msg_queue; struct ipi_message *msg; unsigned long flags, next_msg; - cpumask_t waitmask = callmap; /* waitmask is shared by all cpus */ + cpumask_t waitmask; /* waitmask is shared by all cpus */ - for_each_cpu_mask(cpu, callmap) { + cpumask_copy(&waitmask, &callmap); + for_each_cpu(cpu, &callmap) { msg_queue = &per_cpu(ipi_msg_queue, cpu); spin_lock_irqsave(&msg_queue->lock, flags); if (msg_queue->count < BFIN_IPI_MSGQ_LEN) { @@ -246,7 +248,7 @@ static inline void smp_send_message(cpumask_t callmap, unsigned long type, } if (wait) { - while (!cpus_empty(waitmask)) + while (!cpumask_empty(&waitmask)) blackfin_dcache_invalidate_range( (unsigned long)(&waitmask), (unsigned long)(&waitmask)); @@ -265,9 +267,9 @@ int smp_call_function(void (*func)(void *info), void *info, int wait) cpumask_t callmap; preempt_disable(); - callmap = cpu_online_map; - cpu_clear(smp_processor_id(), callmap); - if (!cpus_empty(callmap)) + cpumask_copy(&callmap, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &callmap); + if (!cpumask_empty(&callmap)) smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); preempt_enable(); @@ -284,8 +286,8 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, if (cpu_is_offline(cpu)) return 0; - cpus_clear(callmap); - cpu_set(cpu, callmap); + cpumask_clear(&callmap); + cpumask_set_cpu(cpu, &callmap); smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); @@ -308,9 +310,9 @@ void smp_send_stop(void) cpumask_t callmap; preempt_disable(); - callmap = cpu_online_map; - cpu_clear(smp_processor_id(), callmap); - if (!cpus_empty(callmap)) + cpumask_copy(&callmap, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &callmap); + if (!cpumask_empty(&callmap)) smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); preempt_enable(); diff --git a/arch/blackfin/mm/sram-alloc.c b/arch/blackfin/mm/sram-alloc.c index dfd304a4a3ea..29d98faa1efd 100644 --- a/arch/blackfin/mm/sram-alloc.c +++ b/arch/blackfin/mm/sram-alloc.c @@ -15,6 +15,7 @@ #include <linux/init.h> #include <linux/poll.h> #include <linux/proc_fs.h> +#include <linux/seq_file.h> #include <linux/spinlock.h> #include <linux/rtc.h> #include <linux/slab.h> @@ -764,7 +765,7 @@ EXPORT_SYMBOL(sram_alloc_with_lsl); /* Need to keep line of output the same. Currently, that is 44 bytes * (including newline). */ -static int _sram_proc_read(char *buf, int *len, int count, const char *desc, +static int _sram_proc_show(struct seq_file *m, const char *desc, struct sram_piece *pfree_head, struct sram_piece *pused_head) { @@ -773,13 +774,13 @@ static int _sram_proc_read(char *buf, int *len, int count, const char *desc, if (!pfree_head || !pused_head) return -1; - *len += sprintf(&buf[*len], "--- SRAM %-14s Size PID State \n", desc); + seq_printf(m, "--- SRAM %-14s Size PID State \n", desc); /* search the relevant memory slot */ pslot = pused_head->next; while (pslot != NULL) { - *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + seq_printf(m, "%p-%p %10i %5i %-10s\n", pslot->paddr, pslot->paddr + pslot->size, pslot->size, pslot->pid, "ALLOCATED"); @@ -789,7 +790,7 @@ static int _sram_proc_read(char *buf, int *len, int count, const char *desc, pslot = pfree_head->next; while (pslot != NULL) { - *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + seq_printf(m, "%p-%p %10i %5i %-10s\n", pslot->paddr, pslot->paddr + pslot->size, pslot->size, pslot->pid, "FREE"); @@ -798,54 +799,62 @@ static int _sram_proc_read(char *buf, int *len, int count, const char *desc, return 0; } -static int sram_proc_read(char *buf, char **start, off_t offset, int count, - int *eof, void *data) +static int sram_proc_show(struct seq_file *m, void *v) { - int len = 0; unsigned int cpu; for (cpu = 0; cpu < num_possible_cpus(); ++cpu) { - if (_sram_proc_read(buf, &len, count, "Scratchpad", + if (_sram_proc_show(m, "Scratchpad", &per_cpu(free_l1_ssram_head, cpu), &per_cpu(used_l1_ssram_head, cpu))) goto not_done; #if L1_DATA_A_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L1 Data A", + if (_sram_proc_show(m, "L1 Data A", &per_cpu(free_l1_data_A_sram_head, cpu), &per_cpu(used_l1_data_A_sram_head, cpu))) goto not_done; #endif #if L1_DATA_B_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L1 Data B", + if (_sram_proc_show(m, "L1 Data B", &per_cpu(free_l1_data_B_sram_head, cpu), &per_cpu(used_l1_data_B_sram_head, cpu))) goto not_done; #endif #if L1_CODE_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L1 Instruction", + if (_sram_proc_show(m, "L1 Instruction", &per_cpu(free_l1_inst_sram_head, cpu), &per_cpu(used_l1_inst_sram_head, cpu))) goto not_done; #endif } #if L2_LENGTH != 0 - if (_sram_proc_read(buf, &len, count, "L2", &free_l2_sram_head, - &used_l2_sram_head)) + if (_sram_proc_show(m, "L2", &free_l2_sram_head, &used_l2_sram_head)) goto not_done; #endif - *eof = 1; not_done: - return len; + return 0; +} + +static int sram_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, sram_proc_show, NULL); } +static const struct file_operations sram_proc_ops = { + .open = sram_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int __init sram_proc_init(void) { struct proc_dir_entry *ptr; - ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL); + + ptr = proc_create("sram", S_IRUGO, NULL, &sram_proc_ops); if (!ptr) { printk(KERN_WARNING "unable to create /proc/sram\n"); return -1; } - ptr->read_proc = sram_proc_read; return 0; } late_initcall(sram_proc_init); diff --git a/arch/cris/arch-v32/kernel/irq.c b/arch/cris/arch-v32/kernel/irq.c index 68a1a5901ca5..5ebe6e841820 100644 --- a/arch/cris/arch-v32/kernel/irq.c +++ b/arch/cris/arch-v32/kernel/irq.c @@ -266,11 +266,11 @@ static int irq_cpu(int irq) /* Let the interrupt stay if possible */ - if (cpu_isset(cpu, irq_allocations[irq - FIRST_IRQ].mask)) + if (cpumask_test_cpu(cpu, &irq_allocations[irq - FIRST_IRQ].mask)) goto out; /* IRQ must be moved to another CPU. */ - cpu = first_cpu(irq_allocations[irq - FIRST_IRQ].mask); + cpu = cpumask_first(&irq_allocations[irq - FIRST_IRQ].mask); irq_allocations[irq - FIRST_IRQ].cpu = cpu; out: spin_unlock_irqrestore(&irq_lock, flags); diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 66cc75657e2f..a0843a71aaee 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -81,7 +81,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* Mark all possible CPUs as present */ for (i = 0; i < max_cpus; i++) - cpu_set(i, phys_cpu_present_map); + cpumask_set_cpu(i, &phys_cpu_present_map); } void __devinit smp_prepare_boot_cpu(void) @@ -98,7 +98,7 @@ void __devinit smp_prepare_boot_cpu(void) SUPP_REG_WR(RW_MM_TLB_PGD, pgd); set_cpu_online(0, true); - cpu_set(0, phys_cpu_present_map); + cpumask_set_cpu(0, &phys_cpu_present_map); set_cpu_possible(0, true); } @@ -112,8 +112,9 @@ smp_boot_one_cpu(int cpuid) { unsigned timeout; struct task_struct *idle; - cpumask_t cpu_mask = CPU_MASK_NONE; + cpumask_t cpu_mask; + cpumask_clear(&cpu_mask); idle = fork_idle(cpuid); if (IS_ERR(idle)) panic("SMP: fork failed for CPU:%d", cpuid); @@ -125,10 +126,10 @@ smp_boot_one_cpu(int cpuid) cpu_now_booting = cpuid; /* Kick it */ - cpu_set(cpuid, cpu_online_map); - cpu_set(cpuid, cpu_mask); + set_cpu_online(cpuid, true); + cpumask_set_cpu(cpuid, &cpu_mask); send_ipi(IPI_BOOT, 0, cpu_mask); - cpu_clear(cpuid, cpu_online_map); + set_cpu_online(cpuid, false); /* Wait for CPU to come online */ for (timeout = 0; timeout < 10000; timeout++) { @@ -176,7 +177,7 @@ void __init smp_callin(void) notify_cpu_starting(cpu); local_irq_enable(); - cpu_set(cpu, cpu_online_map); + set_cpu_online(cpu, true); cpu_idle(); } @@ -214,8 +215,9 @@ int __cpuinit __cpu_up(unsigned int cpu) void smp_send_reschedule(int cpu) { - cpumask_t cpu_mask = CPU_MASK_NONE; - cpu_set(cpu, cpu_mask); + cpumask_t cpu_mask; + cpumask_clear(&cpu_mask); + cpumask_set_cpu(cpu, &cpu_mask); send_ipi(IPI_SCHEDULE, 0, cpu_mask); } @@ -232,7 +234,7 @@ void flush_tlb_common(struct mm_struct* mm, struct vm_area_struct* vma, unsigned spin_lock_irqsave(&tlbstate_lock, flags); cpu_mask = (mm == FLUSH_ALL ? cpu_all_mask : *mm_cpumask(mm)); - cpu_clear(smp_processor_id(), cpu_mask); + cpumask_clear_cpu(smp_processor_id(), &cpu_mask); flush_mm = mm; flush_vma = vma; flush_addr = addr; @@ -277,10 +279,10 @@ int send_ipi(int vector, int wait, cpumask_t cpu_mask) int ret = 0; /* Calculate CPUs to send to. */ - cpus_and(cpu_mask, cpu_mask, cpu_online_map); + cpumask_and(&cpu_mask, &cpu_mask, cpu_online_mask); /* Send the IPI. */ - for_each_cpu_mask(i, cpu_mask) + for_each_cpu(i, &cpu_mask) { ipi.vector |= vector; REG_WR(intr_vect, irq_regs[i], rw_ipi, ipi); @@ -288,7 +290,7 @@ int send_ipi(int vector, int wait, cpumask_t cpu_mask) /* Wait for IPI to finish on other CPUS */ if (wait) { - for_each_cpu_mask(i, cpu_mask) { + for_each_cpu(i, &cpu_mask) { int j; for (j = 0 ; j < 1000; j++) { ipi = REG_RD(intr_vect, irq_regs[i], rw_ipi); @@ -314,11 +316,12 @@ int send_ipi(int vector, int wait, cpumask_t cpu_mask) */ int smp_call_function(void (*func)(void *info), void *info, int wait) { - cpumask_t cpu_mask = CPU_MASK_ALL; + cpumask_t cpu_mask; struct call_data_struct data; int ret; - cpu_clear(smp_processor_id(), cpu_mask); + cpumask_setall(&cpu_mask); + cpumask_clear_cpu(smp_processor_id(), &cpu_mask); WARN_ON(irqs_disabled()); diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S index 728bbd9e7d4c..a6990cb0f098 100644 --- a/arch/cris/kernel/vmlinux.lds.S +++ b/arch/cris/kernel/vmlinux.lds.S @@ -102,7 +102,7 @@ SECTIONS #endif __vmlinux_end = .; /* Last address of the physical file. */ #ifdef CONFIG_ETRAX_ARCH_V32 - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) .init.ramfs : { INIT_RAM_FS diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index df33ab89d70f..d72ab58fd83e 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -13,8 +13,6 @@ #include <linux/bootmem.h> #include <asm/tlb.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - unsigned long empty_zero_page; extern char _stext, _edata, _etext; /* From linkerscript */ diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index 0daae8af5787..7e958d829ec9 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -37,7 +37,7 @@ SECTIONS _einittext = .; INIT_DATA_SECTION(8) - PERCPU(L1_CACHE_BYTES, 4096) + PERCPU_SECTION(L1_CACHE_BYTES) . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index ed64588ac3a7..fbe5f0dbae06 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -41,8 +41,6 @@ #undef DEBUG -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * BAD_PAGE is the page that is used for page faults when linux * is out-of-memory. Older versions of linux just did a diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h index 23cce999eb1c..c3ffe3e54edc 100644 --- a/arch/ia64/include/asm/tlb.h +++ b/arch/ia64/include/asm/tlb.h @@ -47,21 +47,27 @@ #include <asm/machvec.h> #ifdef CONFIG_SMP -# define FREE_PTE_NR 2048 # define tlb_fast_mode(tlb) ((tlb)->nr == ~0U) #else -# define FREE_PTE_NR 0 # define tlb_fast_mode(tlb) (1) #endif +/* + * If we can't allocate a page to make a big batch of page pointers + * to work on, then just handle a few from the on-stack structure. + */ +#define IA64_GATHER_BUNDLE 8 + struct mmu_gather { struct mm_struct *mm; unsigned int nr; /* == ~0U => fast mode */ + unsigned int max; unsigned char fullmm; /* non-zero means full mm flush */ unsigned char need_flush; /* really unmapped some PTEs? */ unsigned long start_addr; unsigned long end_addr; - struct page *pages[FREE_PTE_NR]; + struct page **pages; + struct page *local[IA64_GATHER_BUNDLE]; }; struct ia64_tr_entry { @@ -90,9 +96,6 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS]; #define RR_RID_MASK 0x00000000ffffff00L #define RR_TO_RID(val) ((val >> 8) & 0xffffff) -/* Users of the generic TLB shootdown code must declare this storage space. */ -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * Flush the TLB for address range START to END and, if not in fast mode, release the * freed pages that where gathered up to this point. @@ -147,15 +150,23 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e } } -/* - * Return a pointer to an initialized struct mmu_gather. - */ -static inline struct mmu_gather * -tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush) +static inline void __tlb_alloc_page(struct mmu_gather *tlb) { - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0); + if (addr) { + tlb->pages = (void *)addr; + tlb->max = PAGE_SIZE / sizeof(void *); + } +} + + +static inline void +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush) +{ tlb->mm = mm; + tlb->max = ARRAY_SIZE(tlb->local); + tlb->pages = tlb->local; /* * Use fast mode if only 1 CPU is online. * @@ -172,7 +183,6 @@ tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush) tlb->nr = (num_online_cpus() == 1) ? ~0U : 0; tlb->fullmm = full_mm_flush; tlb->start_addr = ~0UL; - return tlb; } /* @@ -180,7 +190,7 @@ tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush) * collected. */ static inline void -tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) +tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { /* * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and @@ -191,7 +201,8 @@ tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) /* keep the page table cache within bounds */ check_pgt_cache(); - put_cpu_var(mmu_gathers); + if (tlb->pages != tlb->local) + free_pages((unsigned long)tlb->pages, 0); } /* @@ -199,18 +210,33 @@ tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end) * must be delayed until after the TLB has been flushed (see comments at the beginning of * this file). */ -static inline void -tlb_remove_page (struct mmu_gather *tlb, struct page *page) +static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { tlb->need_flush = 1; if (tlb_fast_mode(tlb)) { free_page_and_swap_cache(page); - return; + return 1; /* avoid calling tlb_flush_mmu */ } + + if (!tlb->nr && tlb->pages == tlb->local) + __tlb_alloc_page(tlb); + tlb->pages[tlb->nr++] = page; - if (tlb->nr >= FREE_PTE_NR) - ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr); + VM_BUG_ON(tlb->nr > tlb->max); + + return tlb->max - tlb->nr; +} + +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ + ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr); +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + if (!__tlb_remove_page(tlb, page)) + tlb_flush_mmu(tlb); } /* diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 04440cc09b40..85118dfe9bb5 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -36,7 +36,7 @@ static cycle_t itc_get_cycles(struct clocksource *cs); struct fsyscall_gtod_data_t fsyscall_gtod_data = { - .lock = SEQLOCK_UNLOCKED, + .lock = __SEQLOCK_UNLOCKED(fsyscall_gtod_data.lock), }; struct itc_jitter_data_t itc_jitter_data; diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 9a018cde5d84..f114a3b14c6a 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -44,13 +44,16 @@ void show_mem(unsigned int filter) pg_data_t *pgdat; printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); + show_free_areas(filter); printk(KERN_INFO "Node memory in pages:\n"); for_each_online_pgdat(pgdat) { unsigned long present; unsigned long flags; int shared = 0, cached = 0, reserved = 0; + int nid = pgdat->node_id; + if (skip_free_areas_node(filter, nid)) + continue; pgdat_resize_lock(pgdat, &flags); present = pgdat->node_present_pages; for(i = 0; i < pgdat->node_spanned_pages; i++) { @@ -64,8 +67,7 @@ void show_mem(unsigned int filter) if (max_gap < LARGE_GAP) continue; #endif - i = vmemmap_find_next_valid_pfn(pgdat->node_id, - i) - 1; + i = vmemmap_find_next_valid_pfn(nid, i) - 1; continue; } if (PageReserved(page)) @@ -81,7 +83,7 @@ void show_mem(unsigned int filter) total_cached += cached; total_shared += shared; printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, " - "shrd: %10d, swpd: %10d\n", pgdat->node_id, + "shrd: %10d, swpd: %10d\n", nid, present, reserved, shared, cached); } printk(KERN_INFO "%ld pages of RAM\n", total_present); diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index 82ab1bc6afb1..c641333cd997 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -622,13 +622,16 @@ void show_mem(unsigned int filter) pg_data_t *pgdat; printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); + show_free_areas(filter); printk(KERN_INFO "Node memory in pages:\n"); for_each_online_pgdat(pgdat) { unsigned long present; unsigned long flags; int shared = 0, cached = 0, reserved = 0; + int nid = pgdat->node_id; + if (skip_free_areas_node(filter, nid)) + continue; pgdat_resize_lock(pgdat, &flags); present = pgdat->node_present_pages; for(i = 0; i < pgdat->node_spanned_pages; i++) { @@ -638,8 +641,7 @@ void show_mem(unsigned int filter) if (pfn_valid(pgdat->node_start_pfn + i)) page = pfn_to_page(pgdat->node_start_pfn + i); else { - i = vmemmap_find_next_valid_pfn(pgdat->node_id, - i) - 1; + i = vmemmap_find_next_valid_pfn(nid, i) - 1; continue; } if (PageReserved(page)) @@ -655,7 +657,7 @@ void show_mem(unsigned int filter) total_cached += cached; total_shared += shared; printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, " - "shrd: %10d, swpd: %10d\n", pgdat->node_id, + "shrd: %10d, swpd: %10d\n", nid, present, reserved, shared, cached); } printk(KERN_INFO "%ld pages of RAM\n", total_present); diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c index ed41759efcac..00cb0e26c64e 100644 --- a/arch/ia64/mm/init.c +++ b/arch/ia64/mm/init.c @@ -36,8 +36,6 @@ #include <asm/mca.h> #include <asm/paravirt.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - extern void ia64_tlb_init (void); unsigned long MAX_DMA_ADDRESS = PAGE_OFFSET + 0x100000000UL; diff --git a/arch/m32r/Kconfig.debug b/arch/m32r/Kconfig.debug index 2e1019ddbb22..bb1afc1a31cc 100644 --- a/arch/m32r/Kconfig.debug +++ b/arch/m32r/Kconfig.debug @@ -9,15 +9,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config DEBUG_PAGEALLOC bool "Debug page memory allocations" depends on DEBUG_KERNEL && BROKEN diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h index e67ded1aab91..8accc1bb0263 100644 --- a/arch/m32r/include/asm/smp.h +++ b/arch/m32r/include/asm/smp.h @@ -94,8 +94,6 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #define NO_PROC_ID (0xff) /* No processor magic marker */ -#define PROC_CHANGE_PENALTY (15) /* Schedule penalty */ - /* * M32R-mp IPI */ diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index cf95aec77460..018e4a711d79 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -54,7 +54,7 @@ SECTIONS __init_begin = .; INIT_TEXT_SECTION(PAGE_SIZE) INIT_DATA_SECTION(16) - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c index 5d2858f6eede..2c468e8b5853 100644 --- a/arch/m32r/mm/discontig.c +++ b/arch/m32r/mm/discontig.c @@ -149,6 +149,7 @@ unsigned long __init zone_sizes_init(void) zholes_size[ZONE_DMA] = mp->holes; holes += zholes_size[ZONE_DMA]; + node_set_state(nid, N_NORMAL_MEMORY); free_area_init_node(nid, zones_size, start_pfn, zholes_size); } diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index 73e2205ebf5a..78b660e903da 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -35,8 +35,6 @@ extern char __init_begin, __init_end; pgd_t swapper_pg_dir[1024]; -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * Cache of MMU context last used. */ diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 75531da02a40..d66e34c718d0 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -5,6 +5,7 @@ config M68K select HAVE_AOUT if MMU select GENERIC_ATOMIC64 if MMU select HAVE_GENERIC_HARDIRQS if !MMU + select GENERIC_IRQ_SHOW if !MMU config RWSEM_GENERIC_SPINLOCK bool diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h index 7d3779fdc5b6..6b0e2d349f0e 100644 --- a/arch/m68k/include/asm/bitops_no.h +++ b/arch/m68k/include/asm/bitops_no.h @@ -246,23 +246,7 @@ static inline int __test_and_clear_bit_le(int nr, volatile void *addr) return retval; } -#define ext2_set_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = __test_and_set_bit_le((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) - -#define ext2_clear_bit_atomic(lock, nr, addr) \ - ({ \ - int ret; \ - spin_lock(lock); \ - ret = __test_and_clear_bit_le((nr), (addr)); \ - spin_unlock(lock); \ - ret; \ - }) +#include <asm-generic/bitops/ext2-atomic.h> static inline int test_bit_le(int nr, const volatile void *addr) { diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h index cf20f3097af6..353bf754a972 100644 --- a/arch/m68k/include/asm/io_no.h +++ b/arch/m68k/include/asm/io_no.h @@ -144,8 +144,10 @@ static inline void io_insl(unsigned int addr, void *buf, int len) #define IOMAP_NOCACHE_NONSER 2 #define IOMAP_WRITETHROUGH 3 -extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); - +static inline void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +{ + return (void *) physaddr; +} static inline void *ioremap(unsigned long physaddr, unsigned long size) { return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); @@ -163,7 +165,7 @@ static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size return __ioremap(physaddr, size, IOMAP_FULL_CACHING); } -extern void iounmap(void *addr); +#define iounmap(addr) do { } while(0) /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c index 59a69a5c62f2..983fed9d469b 100644 --- a/arch/m68k/kernel/asm-offsets.c +++ b/arch/m68k/kernel/asm-offsets.c @@ -1,5 +1,105 @@ -#ifdef CONFIG_MMU -#include "asm-offsets_mm.c" +/* + * This program is used to generate definitions needed by + * assembly language modules. + * + * We use the technique used in the OSF Mach kernel code: + * generate asm statements containing #defines, + * compile this file to assembler, and then extract the + * #defines from the assembly-language output. + */ + +#define ASM_OFFSETS_C + +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/kernel_stat.h> +#include <linux/kbuild.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/amigahw.h> +#include <linux/font.h> + +int main(void) +{ + /* offsets into the task struct */ + DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); + DEFINE(TASK_MM, offsetof(struct task_struct, mm)); + DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); + DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info)); + + /* offsets into the thread struct */ + DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); + DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); + DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); + DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); + DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); + DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); + DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); + DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); + DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); + + /* offsets into the thread_info struct */ + DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count)); + DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags)); + + /* offsets into the pt_regs */ + DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); + DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); + DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); + DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); + DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); + DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); + DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); + DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); + DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); + DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); + DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); + DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); + + /* bitfields are a bit difficult */ +#ifdef CONFIG_COLDFIRE + DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2); #else -#include "asm-offsets_no.c" + DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); +#endif + + /* offsets into the irq_cpustat_t struct */ + DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); + + /* signal defines */ + DEFINE(LSIGSEGV, SIGSEGV); + DEFINE(LSEGV_MAPERR, SEGV_MAPERR); + DEFINE(LSIGTRAP, SIGTRAP); + DEFINE(LTRAP_TRACE, TRAP_TRACE); + +#ifdef CONFIG_MMU + /* offsets into the bi_record struct */ + DEFINE(BIR_TAG, offsetof(struct bi_record, tag)); + DEFINE(BIR_SIZE, offsetof(struct bi_record, size)); + DEFINE(BIR_DATA, offsetof(struct bi_record, data)); + + /* offsets into font_desc (drivers/video/console/font.h) */ + DEFINE(FONT_DESC_IDX, offsetof(struct font_desc, idx)); + DEFINE(FONT_DESC_NAME, offsetof(struct font_desc, name)); + DEFINE(FONT_DESC_WIDTH, offsetof(struct font_desc, width)); + DEFINE(FONT_DESC_HEIGHT, offsetof(struct font_desc, height)); + DEFINE(FONT_DESC_DATA, offsetof(struct font_desc, data)); + DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref)); + + /* offsets into the custom struct */ + DEFINE(CUSTOMBASE, &amiga_custom); + DEFINE(C_INTENAR, offsetof(struct CUSTOM, intenar)); + DEFINE(C_INTREQR, offsetof(struct CUSTOM, intreqr)); + DEFINE(C_INTENA, offsetof(struct CUSTOM, intena)); + DEFINE(C_INTREQ, offsetof(struct CUSTOM, intreq)); + DEFINE(C_SERDATR, offsetof(struct CUSTOM, serdatr)); + DEFINE(C_SERDAT, offsetof(struct CUSTOM, serdat)); + DEFINE(C_SERPER, offsetof(struct CUSTOM, serper)); + DEFINE(CIAABASE, &ciaa); + DEFINE(CIABBASE, &ciab); + DEFINE(C_PRA, offsetof(struct CIA, pra)); + DEFINE(ZTWOBASE, zTwoBase); #endif + + return 0; +} diff --git a/arch/m68k/kernel/asm-offsets_mm.c b/arch/m68k/kernel/asm-offsets_mm.c deleted file mode 100644 index 78e59b82ebc3..000000000000 --- a/arch/m68k/kernel/asm-offsets_mm.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - */ - -#define ASM_OFFSETS_C - -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/kbuild.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/amigahw.h> -#include <linux/font.h> - -int main(void) -{ - /* offsets into the task struct */ - DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); - DEFINE(TASK_INFO, offsetof(struct task_struct, thread.info)); - DEFINE(TASK_MM, offsetof(struct task_struct, mm)); -#ifdef CONFIG_MMU - DEFINE(TASK_TINFO, offsetof(struct task_struct, thread.info)); -#endif - - /* offsets into the thread struct */ - DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); - DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); - DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); - DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); - DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); - DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); - DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); - DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); - DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); - - /* offsets into the thread_info struct */ - DEFINE(TINFO_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TINFO_FLAGS, offsetof(struct thread_info, flags)); - - /* offsets into the pt_regs */ - DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); - DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); - DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); - DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); - DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); - DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); - DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); - DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); - DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); - DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); - DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); - DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); - /* bitfields are a bit difficult */ - DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); - - /* offsets into the irq_cpustat_t struct */ - DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); - - /* offsets into the bi_record struct */ - DEFINE(BIR_TAG, offsetof(struct bi_record, tag)); - DEFINE(BIR_SIZE, offsetof(struct bi_record, size)); - DEFINE(BIR_DATA, offsetof(struct bi_record, data)); - - /* offsets into font_desc (drivers/video/console/font.h) */ - DEFINE(FONT_DESC_IDX, offsetof(struct font_desc, idx)); - DEFINE(FONT_DESC_NAME, offsetof(struct font_desc, name)); - DEFINE(FONT_DESC_WIDTH, offsetof(struct font_desc, width)); - DEFINE(FONT_DESC_HEIGHT, offsetof(struct font_desc, height)); - DEFINE(FONT_DESC_DATA, offsetof(struct font_desc, data)); - DEFINE(FONT_DESC_PREF, offsetof(struct font_desc, pref)); - - /* signal defines */ - DEFINE(LSIGSEGV, SIGSEGV); - DEFINE(LSEGV_MAPERR, SEGV_MAPERR); - DEFINE(LSIGTRAP, SIGTRAP); - DEFINE(LTRAP_TRACE, TRAP_TRACE); - - /* offsets into the custom struct */ - DEFINE(CUSTOMBASE, &amiga_custom); - DEFINE(C_INTENAR, offsetof(struct CUSTOM, intenar)); - DEFINE(C_INTREQR, offsetof(struct CUSTOM, intreqr)); - DEFINE(C_INTENA, offsetof(struct CUSTOM, intena)); - DEFINE(C_INTREQ, offsetof(struct CUSTOM, intreq)); - DEFINE(C_SERDATR, offsetof(struct CUSTOM, serdatr)); - DEFINE(C_SERDAT, offsetof(struct CUSTOM, serdat)); - DEFINE(C_SERPER, offsetof(struct CUSTOM, serper)); - DEFINE(CIAABASE, &ciaa); - DEFINE(CIABBASE, &ciab); - DEFINE(C_PRA, offsetof(struct CIA, pra)); - DEFINE(ZTWOBASE, zTwoBase); - - return 0; -} diff --git a/arch/m68k/kernel/asm-offsets_no.c b/arch/m68k/kernel/asm-offsets_no.c deleted file mode 100644 index ffe02f41ad46..000000000000 --- a/arch/m68k/kernel/asm-offsets_no.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - */ - -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/kernel_stat.h> -#include <linux/ptrace.h> -#include <linux/hardirq.h> -#include <linux/kbuild.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/thread_info.h> - -int main(void) -{ - /* offsets into the task struct */ - DEFINE(TASK_THREAD, offsetof(struct task_struct, thread)); - DEFINE(TASK_MM, offsetof(struct task_struct, mm)); - - /* offsets into the irq_cpustat_t struct */ - DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending)); - - /* offsets into the thread struct */ - DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); - DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); - DEFINE(THREAD_SR, offsetof(struct thread_struct, sr)); - DEFINE(THREAD_FS, offsetof(struct thread_struct, fs)); - DEFINE(THREAD_CRP, offsetof(struct thread_struct, crp)); - DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); - DEFINE(THREAD_FPREG, offsetof(struct thread_struct, fp)); - DEFINE(THREAD_FPCNTL, offsetof(struct thread_struct, fpcntl)); - DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate)); - - /* offsets into the pt_regs */ - DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0)); - DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0)); - DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1)); - DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2)); - DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3)); - DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4)); - DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5)); - DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0)); - DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1)); - DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2)); - DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc)); - DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr)); - -#ifdef CONFIG_COLDFIRE - /* bitfields are a bit difficult */ - DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2); -#else - /* bitfields are a bit difficult */ - DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, pc) + 4); -#endif - - /* signal defines */ - DEFINE(SIGSEGV, SIGSEGV); - DEFINE(SEGV_MAPERR, SEGV_MAPERR); - DEFINE(SIGTRAP, SIGTRAP); - DEFINE(TRAP_TRACE, TRAP_TRACE); - - DEFINE(PT_PTRACED, PT_PTRACED); - - /* Offsets in thread_info structure */ - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PREEMPTCOUNT, offsetof(struct thread_info, preempt_count)); - - return 0; -} diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S index 2783f25e38bd..5f0f6b598b5a 100644 --- a/arch/m68k/kernel/entry_no.S +++ b/arch/m68k/kernel/entry_no.S @@ -24,7 +24,6 @@ * linux 2.4 support David McCullough <davidm@snapgear.com> */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/errno.h> #include <asm/setup.h> diff --git a/arch/m68k/kernel/irq.c b/arch/m68k/kernel/irq.c index 15dbc3e9d20c..544b8717d499 100644 --- a/arch/m68k/kernel/irq.c +++ b/arch/m68k/kernel/irq.c @@ -28,31 +28,3 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) set_irq_regs(oldregs); } - -int show_interrupts(struct seq_file *p, void *v) -{ - struct irqaction *ap; - int irq = *((loff_t *) v); - - if (irq == 0) - seq_puts(p, " CPU0\n"); - - if (irq < NR_IRQS) { - struct irq_desc *desc = irq_to_desc(irq); - - ap = desc->action; - if (ap) { - seq_printf(p, "%3d: ", irq); - seq_printf(p, "%10u ", kstat_irqs(irq)); - seq_printf(p, "%14s ", irq_desc_get_chip(desc)->name); - - seq_printf(p, "%s", ap->name); - for (ap = ap->next; ap; ap = ap->next) - seq_printf(p, ", %s", ap->name); - seq_putc(p, '\n'); - } - } - - return 0; -} - diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c index 4752c28ce0ac..33f82769547c 100644 --- a/arch/m68k/kernel/m68k_ksyms.c +++ b/arch/m68k/kernel/m68k_ksyms.c @@ -1,5 +1,33 @@ -#ifdef CONFIG_MMU -#include "m68k_ksyms_mm.c" -#else -#include "m68k_ksyms_no.c" +#include <linux/module.h> + +asmlinkage long long __ashldi3 (long long, int); +asmlinkage long long __ashrdi3 (long long, int); +asmlinkage long long __lshrdi3 (long long, int); +asmlinkage long long __muldi3 (long long, long long); + +/* The following are special because they're not called + explicitly (the C compiler generates them). Fortunately, + their interface isn't gonna change any time soon now, so + it's OK to leave it out of version control. */ +EXPORT_SYMBOL(__ashldi3); +EXPORT_SYMBOL(__ashrdi3); +EXPORT_SYMBOL(__lshrdi3); +EXPORT_SYMBOL(__muldi3); + +#if !defined(__mc68020__) && !defined(__mc68030__) && \ + !defined(__mc68040__) && !defined(__mc68060__) && !defined(__mcpu32__) +/* + * Simpler 68k and ColdFire parts also need a few other gcc functions. + */ +extern long long __divsi3(long long, long long); +extern long long __modsi3(long long, long long); +extern long long __mulsi3(long long, long long); +extern long long __udivsi3(long long, long long); +extern long long __umodsi3(long long, long long); + +EXPORT_SYMBOL(__divsi3); +EXPORT_SYMBOL(__modsi3); +EXPORT_SYMBOL(__mulsi3); +EXPORT_SYMBOL(__udivsi3); +EXPORT_SYMBOL(__umodsi3); #endif diff --git a/arch/m68k/kernel/m68k_ksyms_mm.c b/arch/m68k/kernel/m68k_ksyms_mm.c deleted file mode 100644 index d900e77e5363..000000000000 --- a/arch/m68k/kernel/m68k_ksyms_mm.c +++ /dev/null @@ -1,16 +0,0 @@ -#include <linux/module.h> - -asmlinkage long long __ashldi3 (long long, int); -asmlinkage long long __ashrdi3 (long long, int); -asmlinkage long long __lshrdi3 (long long, int); -asmlinkage long long __muldi3 (long long, long long); - -/* The following are special because they're not called - explicitly (the C compiler generates them). Fortunately, - their interface isn't gonna change any time soon now, so - it's OK to leave it out of version control. */ -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__muldi3); - diff --git a/arch/m68k/kernel/m68k_ksyms_no.c b/arch/m68k/kernel/m68k_ksyms_no.c deleted file mode 100644 index 39fe0a7aec32..000000000000 --- a/arch/m68k/kernel/m68k_ksyms_no.c +++ /dev/null @@ -1,78 +0,0 @@ -#include <linux/module.h> -#include <linux/linkage.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/in6.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> -#include <asm/machdep.h> -#include <asm/pgalloc.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/checksum.h> -#include <asm/current.h> - -extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); - -/* platform dependent support */ - -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(dump_fpu); - -EXPORT_SYMBOL(ip_fast_csum); - -EXPORT_SYMBOL(kernel_thread); - -/* Networking helper routines. */ -EXPORT_SYMBOL(csum_partial_copy_nocheck); - -/* The following are special because they're not called - explicitly (the C compiler generates them). Fortunately, - their interface isn't gonna change any time soon now, so - it's OK to leave it out of version control. */ -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); - -/* - * libgcc functions - functions that are used internally by the - * compiler... (prototypes are not correct though, but that - * doesn't really matter since they're not versioned). - */ -extern void __ashldi3(void); -extern void __ashrdi3(void); -extern void __divsi3(void); -extern void __lshrdi3(void); -extern void __modsi3(void); -extern void __muldi3(void); -extern void __mulsi3(void); -extern void __udivsi3(void); -extern void __umodsi3(void); - - /* gcc lib functions */ -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -EXPORT_SYMBOL(__divsi3); -EXPORT_SYMBOL(__lshrdi3); -EXPORT_SYMBOL(__modsi3); -EXPORT_SYMBOL(__muldi3); -EXPORT_SYMBOL(__mulsi3); -EXPORT_SYMBOL(__udivsi3); -EXPORT_SYMBOL(__umodsi3); - -#ifdef CONFIG_COLDFIRE -extern unsigned int *dma_device_address; -extern unsigned long dma_base_addr, _ramend; -EXPORT_SYMBOL(dma_base_addr); -EXPORT_SYMBOL(dma_device_address); -EXPORT_SYMBOL(_ramend); - -extern asmlinkage void trap(void); -extern void *_ramvec; -EXPORT_SYMBOL(trap); -EXPORT_SYMBOL(_ramvec); -#endif /* CONFIG_COLDFIRE */ diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c index e2a63af5d517..9b86ad11c68e 100644 --- a/arch/m68k/kernel/process_no.c +++ b/arch/m68k/kernel/process_no.c @@ -151,6 +151,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) set_fs(fs); return retval; } +EXPORT_SYMBOL(kernel_thread); void flush_thread(void) { @@ -283,6 +284,7 @@ int dump_fpu(struct pt_regs *regs, struct user_m68kfp_struct *fpu) #endif return 1; } +EXPORT_SYMBOL(dump_fpu); /* * Generic dumping code. Used for panic and debug. diff --git a/arch/m68k/kernel/sys_m68k.c b/arch/m68k/kernel/sys_m68k.c index 63013df33584..8623f8dc16f8 100644 --- a/arch/m68k/kernel/sys_m68k.c +++ b/arch/m68k/kernel/sys_m68k.c @@ -1,5 +1,580 @@ +/* + * linux/arch/m68k/kernel/sys_m68k.c + * + * This file contains various random system calls that + * have a non-standard calling sequence on the Linux/m68k + * platform. + */ + +#include <linux/capability.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/ipc.h> + +#include <asm/setup.h> +#include <asm/uaccess.h> +#include <asm/cachectl.h> +#include <asm/traps.h> +#include <asm/page.h> +#include <asm/unistd.h> +#include <asm/cacheflush.h> + #ifdef CONFIG_MMU -#include "sys_m68k_mm.c" + +#include <asm/tlb.h> + +asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code); + +asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, + unsigned long prot, unsigned long flags, + unsigned long fd, unsigned long pgoff) +{ + /* + * This is wrong for sun3 - there PAGE_SIZE is 8Kb, + * so we need to shift the argument down by 1; m68k mmap64(3) + * (in libc) expects the last argument of mmap2 in 4Kb units. + */ + return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); +} + +/* Convert virtual (user) address VADDR to physical address PADDR */ +#define virt_to_phys_040(vaddr) \ +({ \ + unsigned long _mmusr, _paddr; \ + \ + __asm__ __volatile__ (".chip 68040\n\t" \ + "ptestr (%1)\n\t" \ + "movec %%mmusr,%0\n\t" \ + ".chip 68k" \ + : "=r" (_mmusr) \ + : "a" (vaddr)); \ + _paddr = (_mmusr & MMU_R_040) ? (_mmusr & PAGE_MASK) : 0; \ + _paddr; \ +}) + +static inline int +cache_flush_040 (unsigned long addr, int scope, int cache, unsigned long len) +{ + unsigned long paddr, i; + + switch (scope) + { + case FLUSH_SCOPE_ALL: + switch (cache) + { + case FLUSH_CACHE_DATA: + /* This nop is needed for some broken versions of the 68040. */ + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpusha %dc\n\t" + ".chip 68k"); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpusha %ic\n\t" + ".chip 68k"); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpusha %bc\n\t" + ".chip 68k"); + break; + } + break; + + case FLUSH_SCOPE_LINE: + /* Find the physical address of the first mapped page in the + address range. */ + if ((paddr = virt_to_phys_040(addr))) { + paddr += addr & ~(PAGE_MASK | 15); + len = (len + (addr & 15) + 15) >> 4; + } else { + unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); + + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + tmp = PAGE_SIZE; + for (;;) + { + if ((paddr = virt_to_phys_040(addr))) + break; + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + } + len = (len + 15) >> 4; + } + i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; + while (len--) + { + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushl %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushl %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushl %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + if (!--i && len) + { + /* + * No need to page align here since it is done by + * virt_to_phys_040(). + */ + addr += PAGE_SIZE; + i = PAGE_SIZE / 16; + /* Recompute physical address when crossing a page + boundary. */ + for (;;) + { + if ((paddr = virt_to_phys_040(addr))) + break; + if (len <= i) + return 0; + len -= i; + addr += PAGE_SIZE; + } + } + else + paddr += 16; + } + break; + + default: + case FLUSH_SCOPE_PAGE: + len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); + for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) + { + if (!(paddr = virt_to_phys_040(addr))) + continue; + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ ("nop\n\t" + ".chip 68040\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + } + break; + } + return 0; +} + +#define virt_to_phys_060(vaddr) \ +({ \ + unsigned long paddr; \ + __asm__ __volatile__ (".chip 68060\n\t" \ + "plpar (%0)\n\t" \ + ".chip 68k" \ + : "=a" (paddr) \ + : "0" (vaddr)); \ + (paddr); /* XXX */ \ +}) + +static inline int +cache_flush_060 (unsigned long addr, int scope, int cache, unsigned long len) +{ + unsigned long paddr, i; + + /* + * 68060 manual says: + * cpush %dc : flush DC, remains valid (with our %cacr setup) + * cpush %ic : invalidate IC + * cpush %bc : flush DC + invalidate IC + */ + switch (scope) + { + case FLUSH_SCOPE_ALL: + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ (".chip 68060\n\t" + "cpusha %dc\n\t" + ".chip 68k"); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ (".chip 68060\n\t" + "cpusha %ic\n\t" + ".chip 68k"); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ (".chip 68060\n\t" + "cpusha %bc\n\t" + ".chip 68k"); + break; + } + break; + + case FLUSH_SCOPE_LINE: + /* Find the physical address of the first mapped page in the + address range. */ + len += addr & 15; + addr &= -16; + if (!(paddr = virt_to_phys_060(addr))) { + unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); + + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + tmp = PAGE_SIZE; + for (;;) + { + if ((paddr = virt_to_phys_060(addr))) + break; + if (len <= tmp) + return 0; + addr += tmp; + len -= tmp; + } + } + len = (len + 15) >> 4; + i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; + while (len--) + { + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushl %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushl %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushl %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + if (!--i && len) + { + + /* + * We just want to jump to the first cache line + * in the next page. + */ + addr += PAGE_SIZE; + addr &= PAGE_MASK; + + i = PAGE_SIZE / 16; + /* Recompute physical address when crossing a page + boundary. */ + for (;;) + { + if ((paddr = virt_to_phys_060(addr))) + break; + if (len <= i) + return 0; + len -= i; + addr += PAGE_SIZE; + } + } + else + paddr += 16; + } + break; + + default: + case FLUSH_SCOPE_PAGE: + len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); + addr &= PAGE_MASK; /* Workaround for bug in some + revisions of the 68060 */ + for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) + { + if (!(paddr = virt_to_phys_060(addr))) + continue; + switch (cache) + { + case FLUSH_CACHE_DATA: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushp %%dc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + case FLUSH_CACHE_INSN: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushp %%ic,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + default: + case FLUSH_CACHE_BOTH: + __asm__ __volatile__ (".chip 68060\n\t" + "cpushp %%bc,(%0)\n\t" + ".chip 68k" + : : "a" (paddr)); + break; + } + } + break; + } + return 0; +} + +/* sys_cacheflush -- flush (part of) the processor cache. */ +asmlinkage int +sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) +{ + struct vm_area_struct *vma; + int ret = -EINVAL; + + if (scope < FLUSH_SCOPE_LINE || scope > FLUSH_SCOPE_ALL || + cache & ~FLUSH_CACHE_BOTH) + goto out; + + if (scope == FLUSH_SCOPE_ALL) { + /* Only the superuser may explicitly flush the whole cache. */ + ret = -EPERM; + if (!capable(CAP_SYS_ADMIN)) + goto out; + } else { + /* + * Verify that the specified address region actually belongs + * to this process. + */ + vma = find_vma (current->mm, addr); + ret = -EINVAL; + /* Check for overflow. */ + if (addr + len < addr) + goto out; + if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) + goto out; + } + + if (CPU_IS_020_OR_030) { + if (scope == FLUSH_SCOPE_LINE && len < 256) { + unsigned long cacr; + __asm__ ("movec %%cacr, %0" : "=r" (cacr)); + if (cache & FLUSH_CACHE_INSN) + cacr |= 4; + if (cache & FLUSH_CACHE_DATA) + cacr |= 0x400; + len >>= 2; + while (len--) { + __asm__ __volatile__ ("movec %1, %%caar\n\t" + "movec %0, %%cacr" + : /* no outputs */ + : "r" (cacr), "r" (addr)); + addr += 4; + } + } else { + /* Flush the whole cache, even if page granularity requested. */ + unsigned long cacr; + __asm__ ("movec %%cacr, %0" : "=r" (cacr)); + if (cache & FLUSH_CACHE_INSN) + cacr |= 8; + if (cache & FLUSH_CACHE_DATA) + cacr |= 0x800; + __asm__ __volatile__ ("movec %0, %%cacr" : : "r" (cacr)); + } + ret = 0; + goto out; + } else { + /* + * 040 or 060: don't blindly trust 'scope', someone could + * try to flush a few megs of memory. + */ + + if (len>=3*PAGE_SIZE && scope<FLUSH_SCOPE_PAGE) + scope=FLUSH_SCOPE_PAGE; + if (len>=10*PAGE_SIZE && scope<FLUSH_SCOPE_ALL) + scope=FLUSH_SCOPE_ALL; + if (CPU_IS_040) { + ret = cache_flush_040 (addr, scope, cache, len); + } else if (CPU_IS_060) { + ret = cache_flush_060 (addr, scope, cache, len); + } + } +out: + return ret; +} + +/* This syscall gets its arguments in A0 (mem), D2 (oldval) and + D1 (newval). */ +asmlinkage int +sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, + unsigned long __user * mem) +{ + /* This was borrowed from ARM's implementation. */ + for (;;) { + struct mm_struct *mm = current->mm; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + spinlock_t *ptl; + unsigned long mem_value; + + down_read(&mm->mmap_sem); + pgd = pgd_offset(mm, (unsigned long)mem); + if (!pgd_present(*pgd)) + goto bad_access; + pmd = pmd_offset(pgd, (unsigned long)mem); + if (!pmd_present(*pmd)) + goto bad_access; + pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl); + if (!pte_present(*pte) || !pte_dirty(*pte) + || !pte_write(*pte)) { + pte_unmap_unlock(pte, ptl); + goto bad_access; + } + + mem_value = *mem; + if (mem_value == oldval) + *mem = newval; + + pte_unmap_unlock(pte, ptl); + up_read(&mm->mmap_sem); + return mem_value; + + bad_access: + up_read(&mm->mmap_sem); + /* This is not necessarily a bad access, we can get here if + a memory we're trying to write to should be copied-on-write. + Make the kernel do the necessary page stuff, then re-iterate. + Simulate a write access fault to do that. */ + { + /* The first argument of the function corresponds to + D1, which is the first field of struct pt_regs. */ + struct pt_regs *fp = (struct pt_regs *)&newval; + + /* '3' is an RMW flag. */ + if (do_page_fault(fp, (unsigned long)mem, 3)) + /* If the do_page_fault() failed, we don't + have anything meaningful to return. + There should be a SIGSEGV pending for + the process. */ + return 0xdeadbeef; + } + } +} + #else -#include "sys_m68k_no.c" -#endif + +/* sys_cacheflush -- flush (part of) the processor cache. */ +asmlinkage int +sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) +{ + flush_cache_all(); + return 0; +} + +/* This syscall gets its arguments in A0 (mem), D2 (oldval) and + D1 (newval). */ +asmlinkage int +sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, + unsigned long __user * mem) +{ + struct mm_struct *mm = current->mm; + unsigned long mem_value; + + down_read(&mm->mmap_sem); + + mem_value = *mem; + if (mem_value == oldval) + *mem = newval; + + up_read(&mm->mmap_sem); + return mem_value; +} + +#endif /* CONFIG_MMU */ + +asmlinkage int sys_getpagesize(void) +{ + return PAGE_SIZE; +} + +/* + * Do a system call from kernel instead of calling sys_execve so we + * end up with proper pt_regs. + */ +int kernel_execve(const char *filename, + const char *const argv[], + const char *const envp[]) +{ + register long __res asm ("%d0") = __NR_execve; + register long __a asm ("%d1") = (long)(filename); + register long __b asm ("%d2") = (long)(argv); + register long __c asm ("%d3") = (long)(envp); + asm volatile ("trap #0" : "+d" (__res) + : "d" (__a), "d" (__b), "d" (__c)); + return __res; +} + +asmlinkage unsigned long sys_get_thread_area(void) +{ + return current_thread_info()->tp_value; +} + +asmlinkage int sys_set_thread_area(unsigned long tp) +{ + current_thread_info()->tp_value = tp; + return 0; +} + +asmlinkage int sys_atomic_barrier(void) +{ + /* no code needed for uniprocs */ + return 0; +} diff --git a/arch/m68k/kernel/sys_m68k_mm.c b/arch/m68k/kernel/sys_m68k_mm.c deleted file mode 100644 index 3db2e7f902aa..000000000000 --- a/arch/m68k/kernel/sys_m68k_mm.c +++ /dev/null @@ -1,546 +0,0 @@ -/* - * linux/arch/m68k/kernel/sys_m68k.c - * - * This file contains various random system calls that - * have a non-standard calling sequence on the Linux/m68k - * platform. - */ - -#include <linux/capability.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/ipc.h> - -#include <asm/setup.h> -#include <asm/uaccess.h> -#include <asm/cachectl.h> -#include <asm/traps.h> -#include <asm/page.h> -#include <asm/unistd.h> -#include <linux/elf.h> -#include <asm/tlb.h> - -asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code); - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - /* - * This is wrong for sun3 - there PAGE_SIZE is 8Kb, - * so we need to shift the argument down by 1; m68k mmap64(3) - * (in libc) expects the last argument of mmap2 in 4Kb units. - */ - return sys_mmap_pgoff(addr, len, prot, flags, fd, pgoff); -} - -/* Convert virtual (user) address VADDR to physical address PADDR */ -#define virt_to_phys_040(vaddr) \ -({ \ - unsigned long _mmusr, _paddr; \ - \ - __asm__ __volatile__ (".chip 68040\n\t" \ - "ptestr (%1)\n\t" \ - "movec %%mmusr,%0\n\t" \ - ".chip 68k" \ - : "=r" (_mmusr) \ - : "a" (vaddr)); \ - _paddr = (_mmusr & MMU_R_040) ? (_mmusr & PAGE_MASK) : 0; \ - _paddr; \ -}) - -static inline int -cache_flush_040 (unsigned long addr, int scope, int cache, unsigned long len) -{ - unsigned long paddr, i; - - switch (scope) - { - case FLUSH_SCOPE_ALL: - switch (cache) - { - case FLUSH_CACHE_DATA: - /* This nop is needed for some broken versions of the 68040. */ - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpusha %dc\n\t" - ".chip 68k"); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpusha %ic\n\t" - ".chip 68k"); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpusha %bc\n\t" - ".chip 68k"); - break; - } - break; - - case FLUSH_SCOPE_LINE: - /* Find the physical address of the first mapped page in the - address range. */ - if ((paddr = virt_to_phys_040(addr))) { - paddr += addr & ~(PAGE_MASK | 15); - len = (len + (addr & 15) + 15) >> 4; - } else { - unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); - - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - tmp = PAGE_SIZE; - for (;;) - { - if ((paddr = virt_to_phys_040(addr))) - break; - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - } - len = (len + 15) >> 4; - } - i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; - while (len--) - { - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushl %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushl %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushl %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - if (!--i && len) - { - /* - * No need to page align here since it is done by - * virt_to_phys_040(). - */ - addr += PAGE_SIZE; - i = PAGE_SIZE / 16; - /* Recompute physical address when crossing a page - boundary. */ - for (;;) - { - if ((paddr = virt_to_phys_040(addr))) - break; - if (len <= i) - return 0; - len -= i; - addr += PAGE_SIZE; - } - } - else - paddr += 16; - } - break; - - default: - case FLUSH_SCOPE_PAGE: - len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); - for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) - { - if (!(paddr = virt_to_phys_040(addr))) - continue; - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ ("nop\n\t" - ".chip 68040\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - } - break; - } - return 0; -} - -#define virt_to_phys_060(vaddr) \ -({ \ - unsigned long paddr; \ - __asm__ __volatile__ (".chip 68060\n\t" \ - "plpar (%0)\n\t" \ - ".chip 68k" \ - : "=a" (paddr) \ - : "0" (vaddr)); \ - (paddr); /* XXX */ \ -}) - -static inline int -cache_flush_060 (unsigned long addr, int scope, int cache, unsigned long len) -{ - unsigned long paddr, i; - - /* - * 68060 manual says: - * cpush %dc : flush DC, remains valid (with our %cacr setup) - * cpush %ic : invalidate IC - * cpush %bc : flush DC + invalidate IC - */ - switch (scope) - { - case FLUSH_SCOPE_ALL: - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ (".chip 68060\n\t" - "cpusha %dc\n\t" - ".chip 68k"); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ (".chip 68060\n\t" - "cpusha %ic\n\t" - ".chip 68k"); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ (".chip 68060\n\t" - "cpusha %bc\n\t" - ".chip 68k"); - break; - } - break; - - case FLUSH_SCOPE_LINE: - /* Find the physical address of the first mapped page in the - address range. */ - len += addr & 15; - addr &= -16; - if (!(paddr = virt_to_phys_060(addr))) { - unsigned long tmp = PAGE_SIZE - (addr & ~PAGE_MASK); - - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - tmp = PAGE_SIZE; - for (;;) - { - if ((paddr = virt_to_phys_060(addr))) - break; - if (len <= tmp) - return 0; - addr += tmp; - len -= tmp; - } - } - len = (len + 15) >> 4; - i = (PAGE_SIZE - (paddr & ~PAGE_MASK)) >> 4; - while (len--) - { - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushl %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushl %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushl %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - if (!--i && len) - { - - /* - * We just want to jump to the first cache line - * in the next page. - */ - addr += PAGE_SIZE; - addr &= PAGE_MASK; - - i = PAGE_SIZE / 16; - /* Recompute physical address when crossing a page - boundary. */ - for (;;) - { - if ((paddr = virt_to_phys_060(addr))) - break; - if (len <= i) - return 0; - len -= i; - addr += PAGE_SIZE; - } - } - else - paddr += 16; - } - break; - - default: - case FLUSH_SCOPE_PAGE: - len += (addr & ~PAGE_MASK) + (PAGE_SIZE - 1); - addr &= PAGE_MASK; /* Workaround for bug in some - revisions of the 68060 */ - for (len >>= PAGE_SHIFT; len--; addr += PAGE_SIZE) - { - if (!(paddr = virt_to_phys_060(addr))) - continue; - switch (cache) - { - case FLUSH_CACHE_DATA: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushp %%dc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - case FLUSH_CACHE_INSN: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushp %%ic,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - default: - case FLUSH_CACHE_BOTH: - __asm__ __volatile__ (".chip 68060\n\t" - "cpushp %%bc,(%0)\n\t" - ".chip 68k" - : : "a" (paddr)); - break; - } - } - break; - } - return 0; -} - -/* sys_cacheflush -- flush (part of) the processor cache. */ -asmlinkage int -sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) -{ - struct vm_area_struct *vma; - int ret = -EINVAL; - - if (scope < FLUSH_SCOPE_LINE || scope > FLUSH_SCOPE_ALL || - cache & ~FLUSH_CACHE_BOTH) - goto out; - - if (scope == FLUSH_SCOPE_ALL) { - /* Only the superuser may explicitly flush the whole cache. */ - ret = -EPERM; - if (!capable(CAP_SYS_ADMIN)) - goto out; - } else { - /* - * Verify that the specified address region actually belongs - * to this process. - */ - vma = find_vma (current->mm, addr); - ret = -EINVAL; - /* Check for overflow. */ - if (addr + len < addr) - goto out; - if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end) - goto out; - } - - if (CPU_IS_020_OR_030) { - if (scope == FLUSH_SCOPE_LINE && len < 256) { - unsigned long cacr; - __asm__ ("movec %%cacr, %0" : "=r" (cacr)); - if (cache & FLUSH_CACHE_INSN) - cacr |= 4; - if (cache & FLUSH_CACHE_DATA) - cacr |= 0x400; - len >>= 2; - while (len--) { - __asm__ __volatile__ ("movec %1, %%caar\n\t" - "movec %0, %%cacr" - : /* no outputs */ - : "r" (cacr), "r" (addr)); - addr += 4; - } - } else { - /* Flush the whole cache, even if page granularity requested. */ - unsigned long cacr; - __asm__ ("movec %%cacr, %0" : "=r" (cacr)); - if (cache & FLUSH_CACHE_INSN) - cacr |= 8; - if (cache & FLUSH_CACHE_DATA) - cacr |= 0x800; - __asm__ __volatile__ ("movec %0, %%cacr" : : "r" (cacr)); - } - ret = 0; - goto out; - } else { - /* - * 040 or 060: don't blindly trust 'scope', someone could - * try to flush a few megs of memory. - */ - - if (len>=3*PAGE_SIZE && scope<FLUSH_SCOPE_PAGE) - scope=FLUSH_SCOPE_PAGE; - if (len>=10*PAGE_SIZE && scope<FLUSH_SCOPE_ALL) - scope=FLUSH_SCOPE_ALL; - if (CPU_IS_040) { - ret = cache_flush_040 (addr, scope, cache, len); - } else if (CPU_IS_060) { - ret = cache_flush_060 (addr, scope, cache, len); - } - } -out: - return ret; -} - -asmlinkage int sys_getpagesize(void) -{ - return PAGE_SIZE; -} - -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) -{ - register long __res asm ("%d0") = __NR_execve; - register long __a asm ("%d1") = (long)(filename); - register long __b asm ("%d2") = (long)(argv); - register long __c asm ("%d3") = (long)(envp); - asm volatile ("trap #0" : "+d" (__res) - : "d" (__a), "d" (__b), "d" (__c)); - return __res; -} - -asmlinkage unsigned long sys_get_thread_area(void) -{ - return current_thread_info()->tp_value; -} - -asmlinkage int sys_set_thread_area(unsigned long tp) -{ - current_thread_info()->tp_value = tp; - return 0; -} - -/* This syscall gets its arguments in A0 (mem), D2 (oldval) and - D1 (newval). */ -asmlinkage int -sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, - unsigned long __user * mem) -{ - /* This was borrowed from ARM's implementation. */ - for (;;) { - struct mm_struct *mm = current->mm; - pgd_t *pgd; - pmd_t *pmd; - pte_t *pte; - spinlock_t *ptl; - unsigned long mem_value; - - down_read(&mm->mmap_sem); - pgd = pgd_offset(mm, (unsigned long)mem); - if (!pgd_present(*pgd)) - goto bad_access; - pmd = pmd_offset(pgd, (unsigned long)mem); - if (!pmd_present(*pmd)) - goto bad_access; - pte = pte_offset_map_lock(mm, pmd, (unsigned long)mem, &ptl); - if (!pte_present(*pte) || !pte_dirty(*pte) - || !pte_write(*pte)) { - pte_unmap_unlock(pte, ptl); - goto bad_access; - } - - mem_value = *mem; - if (mem_value == oldval) - *mem = newval; - - pte_unmap_unlock(pte, ptl); - up_read(&mm->mmap_sem); - return mem_value; - - bad_access: - up_read(&mm->mmap_sem); - /* This is not necessarily a bad access, we can get here if - a memory we're trying to write to should be copied-on-write. - Make the kernel do the necessary page stuff, then re-iterate. - Simulate a write access fault to do that. */ - { - /* The first argument of the function corresponds to - D1, which is the first field of struct pt_regs. */ - struct pt_regs *fp = (struct pt_regs *)&newval; - - /* '3' is an RMW flag. */ - if (do_page_fault(fp, (unsigned long)mem, 3)) - /* If the do_page_fault() failed, we don't - have anything meaningful to return. - There should be a SIGSEGV pending for - the process. */ - return 0xdeadbeef; - } - } -} - -asmlinkage int sys_atomic_barrier(void) -{ - /* no code needed for uniprocs */ - return 0; -} diff --git a/arch/m68k/kernel/sys_m68k_no.c b/arch/m68k/kernel/sys_m68k_no.c deleted file mode 100644 index 68488ae47f0a..000000000000 --- a/arch/m68k/kernel/sys_m68k_no.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * linux/arch/m68knommu/kernel/sys_m68k.c - * - * This file contains various random system calls that - * have a non-standard calling sequence on the Linux/m68k - * platform. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/syscalls.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/ipc.h> -#include <linux/fs.h> - -#include <asm/setup.h> -#include <asm/uaccess.h> -#include <asm/cachectl.h> -#include <asm/traps.h> -#include <asm/cacheflush.h> -#include <asm/unistd.h> - -/* sys_cacheflush -- flush (part of) the processor cache. */ -asmlinkage int -sys_cacheflush (unsigned long addr, int scope, int cache, unsigned long len) -{ - flush_cache_all(); - return(0); -} - -asmlinkage int sys_getpagesize(void) -{ - return PAGE_SIZE; -} - -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) -{ - register long __res asm ("%d0") = __NR_execve; - register long __a asm ("%d1") = (long)(filename); - register long __b asm ("%d2") = (long)(argv); - register long __c asm ("%d3") = (long)(envp); - asm volatile ("trap #0" : "+d" (__res) - : "d" (__a), "d" (__b), "d" (__c)); - return __res; -} - -asmlinkage unsigned long sys_get_thread_area(void) -{ - return current_thread_info()->tp_value; -} - -asmlinkage int sys_set_thread_area(unsigned long tp) -{ - current_thread_info()->tp_value = tp; - return 0; -} - -/* This syscall gets its arguments in A0 (mem), D2 (oldval) and - D1 (newval). */ -asmlinkage int -sys_atomic_cmpxchg_32(unsigned long newval, int oldval, int d3, int d4, int d5, - unsigned long __user * mem) -{ - struct mm_struct *mm = current->mm; - unsigned long mem_value; - - down_read(&mm->mmap_sem); - - mem_value = *mem; - if (mem_value == oldval) - *mem = newval; - - up_read(&mm->mmap_sem); - return mem_value; -} - -asmlinkage int sys_atomic_barrier(void) -{ - /* no code needed for uniprocs */ - return 0; -} diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 5909e392cb1e..6f7b09122a00 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -11,7 +11,6 @@ * Linux/m68k support by Hamish Macdonald */ -#include <linux/sys.h> #include <linux/linkage.h> #ifndef CONFIG_MMU diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index 1f95881d8437..df421e501436 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -1,5 +1,14 @@ + +# +# Makefile for m68k-specific library files.. +# + +lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ + memcpy.o memset.o memmove.o + ifdef CONFIG_MMU -include arch/m68k/lib/Makefile_mm +lib-y += string.o uaccess.o checksum_mm.o else -include arch/m68k/lib/Makefile_no +lib-y += mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o delay.o checksum_no.o endif + diff --git a/arch/m68k/lib/Makefile_mm b/arch/m68k/lib/Makefile_mm deleted file mode 100644 index af9abf8d9d98..000000000000 --- a/arch/m68k/lib/Makefile_mm +++ /dev/null @@ -1,6 +0,0 @@ -# -# Makefile for m68k-specific library files.. -# - -lib-y := ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - checksum.o string.o uaccess.o diff --git a/arch/m68k/lib/Makefile_no b/arch/m68k/lib/Makefile_no deleted file mode 100644 index 32d852e586d7..000000000000 --- a/arch/m68k/lib/Makefile_no +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for m68knommu specific library files.. -# - -lib-y := ashldi3.o ashrdi3.o lshrdi3.o \ - muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \ - checksum.o memcpy.o memmove.o memset.o delay.o diff --git a/arch/m68k/lib/checksum.c b/arch/m68k/lib/checksum.c deleted file mode 100644 index 1297536060de..000000000000 --- a/arch/m68k/lib/checksum.c +++ /dev/null @@ -1,5 +0,0 @@ -#ifdef CONFIG_MMU -#include "checksum_mm.c" -#else -#include "checksum_no.c" -#endif diff --git a/arch/m68k/lib/checksum_no.c b/arch/m68k/lib/checksum_no.c index eccf25d3d73e..e4c6354da765 100644 --- a/arch/m68k/lib/checksum_no.c +++ b/arch/m68k/lib/checksum_no.c @@ -101,6 +101,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) { return (__force __sum16)~do_csum(iph,ihl*4); } +EXPORT_SYMBOL(ip_fast_csum); #endif /* @@ -140,6 +141,7 @@ csum_partial_copy_from_user(const void __user *src, void *dst, memcpy(dst, (__force const void *)src, len); return csum_partial(dst, len, sum); } +EXPORT_SYMBOL(csum_partial_copy_from_user); /* * copy from ds while checksumming, otherwise like csum_partial @@ -151,3 +153,4 @@ csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) memcpy(dst, src, len); return csum_partial(dst, len, sum); } +EXPORT_SYMBOL(csum_partial_copy_nocheck); diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c index b50dbcad4746..62182c81e91c 100644 --- a/arch/m68k/lib/memcpy.c +++ b/arch/m68k/lib/memcpy.c @@ -1,62 +1,80 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ -#include <linux/types.h> +#include <linux/module.h> +#include <linux/string.h> -void * memcpy(void * to, const void * from, size_t n) +void *memcpy(void *to, const void *from, size_t n) { -#ifdef CONFIG_COLDFIRE - void *xto = to; - size_t temp; + void *xto = to; + size_t temp, temp1; - if (!n) - return xto; - if ((long) to & 1) - { - char *cto = to; - const char *cfrom = from; - *cto++ = *cfrom++; - to = cto; - from = cfrom; - n--; - } - if (n > 2 && (long) to & 2) - { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - n -= 2; - } - temp = n >> 2; - if (temp) - { - long *lto = to; - const long *lfrom = from; - for (; temp; temp--) - *lto++ = *lfrom++; - to = lto; - from = lfrom; - } - if (n & 2) - { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - } - if (n & 1) - { - char *cto = to; - const char *cfrom = from; - *cto = *cfrom; - } - return xto; + if (!n) + return xto; + if ((long)to & 1) { + char *cto = to; + const char *cfrom = from; + *cto++ = *cfrom++; + to = cto; + from = cfrom; + n--; + } + if (n > 2 && (long)to & 2) { + short *sto = to; + const short *sfrom = from; + *sto++ = *sfrom++; + to = sto; + from = sfrom; + n -= 2; + } + temp = n >> 2; + if (temp) { + long *lto = to; + const long *lfrom = from; +#if defined(__mc68020__) || defined(__mc68030__) || \ + defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) + asm volatile ( + " movel %2,%3\n" + " andw #7,%3\n" + " lsrl #3,%2\n" + " negw %3\n" + " jmp %%pc@(1f,%3:w:2)\n" + "4: movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + " movel %0@+,%1@+\n" + "1: dbra %2,4b\n" + " clrw %2\n" + " subql #1,%2\n" + " jpl 4b" + : "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1) + : "0" (lfrom), "1" (lto), "2" (temp)); #else - const char *c_from = from; - char *c_to = to; - while (n-- > 0) - *c_to++ = *c_from++; - return((void *) to); + for (; temp; temp--) + *lto++ = *lfrom++; #endif + to = lto; + from = lfrom; + } + if (n & 2) { + short *sto = to; + const short *sfrom = from; + *sto++ = *sfrom++; + to = sto; + from = sfrom; + } + if (n & 1) { + char *cto = to; + const char *cfrom = from; + *cto = *cfrom; + } + return xto; } +EXPORT_SYMBOL(memcpy); diff --git a/arch/m68k/lib/memmove.c b/arch/m68k/lib/memmove.c index b3dcfe9dab7e..6519f7f349f6 100644 --- a/arch/m68k/lib/memmove.c +++ b/arch/m68k/lib/memmove.c @@ -4,8 +4,6 @@ * for more details. */ -#define __IN_STRING_C - #include <linux/module.h> #include <linux/string.h> diff --git a/arch/m68k/lib/memset.c b/arch/m68k/lib/memset.c index 1389bf455633..f649e6a2e644 100644 --- a/arch/m68k/lib/memset.c +++ b/arch/m68k/lib/memset.c @@ -1,47 +1,75 @@ -#include <linux/types.h> +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ -void * memset(void * s, int c, size_t count) +#include <linux/module.h> +#include <linux/string.h> + +void *memset(void *s, int c, size_t count) { - void *xs = s; - size_t temp; + void *xs = s; + size_t temp; - if (!count) - return xs; - c &= 0xff; - c |= c << 8; - c |= c << 16; - if ((long) s & 1) - { - char *cs = s; - *cs++ = c; - s = cs; - count--; - } - if (count > 2 && (long) s & 2) - { - short *ss = s; - *ss++ = c; - s = ss; - count -= 2; - } - temp = count >> 2; - if (temp) - { - long *ls = s; - for (; temp; temp--) - *ls++ = c; - s = ls; - } - if (count & 2) - { - short *ss = s; - *ss++ = c; - s = ss; - } - if (count & 1) - { - char *cs = s; - *cs = c; - } - return xs; + if (!count) + return xs; + c &= 0xff; + c |= c << 8; + c |= c << 16; + if ((long)s & 1) { + char *cs = s; + *cs++ = c; + s = cs; + count--; + } + if (count > 2 && (long)s & 2) { + short *ss = s; + *ss++ = c; + s = ss; + count -= 2; + } + temp = count >> 2; + if (temp) { + long *ls = s; +#if defined(__mc68020__) || defined(__mc68030__) || \ + defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) + size_t temp1; + asm volatile ( + " movel %1,%2\n" + " andw #7,%2\n" + " lsrl #3,%1\n" + " negw %2\n" + " jmp %%pc@(2f,%2:w:2)\n" + "1: movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + " movel %3,%0@+\n" + "2: dbra %1,1b\n" + " clrw %1\n" + " subql #1,%1\n" + " jpl 1b" + : "=a" (ls), "=d" (temp), "=&d" (temp1) + : "d" (c), "0" (ls), "1" (temp)); +#else + for (; temp; temp--) + *ls++ = c; +#endif + s = ls; + } + if (count & 2) { + short *ss = s; + *ss++ = c; + s = ss; + } + if (count & 1) { + char *cs = s; + *cs = c; + } + return xs; } +EXPORT_SYMBOL(memset); diff --git a/arch/m68k/lib/muldi3.c b/arch/m68k/lib/muldi3.c index 16e0eb338ee0..079bafca073e 100644 --- a/arch/m68k/lib/muldi3.c +++ b/arch/m68k/lib/muldi3.c @@ -1,5 +1,98 @@ -#ifdef CONFIG_MMU -#include "muldi3_mm.c" +/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and + gcc-2.7.2.3/longlong.h which is: */ +/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + +#if defined(__mc68020__) || defined(__mc68030__) || \ + defined(__mc68040__) || defined(__mc68060__) || defined(__mcpu32__) + +#define umul_ppmm(w1, w0, u, v) \ + __asm__ ("mulu%.l %3,%1:%0" \ + : "=d" ((USItype)(w0)), \ + "=d" ((USItype)(w1)) \ + : "%0" ((USItype)(u)), \ + "dmi" ((USItype)(v))) + #else -#include "muldi3_no.c" + +#define SI_TYPE_SIZE 32 +#define __BITS4 (SI_TYPE_SIZE / 4) +#define __ll_B (1L << (SI_TYPE_SIZE / 2)) +#define __ll_lowpart(t) ((USItype) (t) % __ll_B) +#define __ll_highpart(t) ((USItype) (t) / __ll_B) + +#define umul_ppmm(w1, w0, u, v) \ + do { \ + USItype __x0, __x1, __x2, __x3; \ + USItype __ul, __vl, __uh, __vh; \ + \ + __ul = __ll_lowpart (u); \ + __uh = __ll_highpart (u); \ + __vl = __ll_lowpart (v); \ + __vh = __ll_highpart (v); \ + \ + __x0 = (USItype) __ul * __vl; \ + __x1 = (USItype) __ul * __vh; \ + __x2 = (USItype) __uh * __vl; \ + __x3 = (USItype) __uh * __vh; \ + \ + __x1 += __ll_highpart (__x0);/* this can't give carry */ \ + __x1 += __x2; /* but this indeed can */ \ + if (__x1 < __x2) /* did we get it? */ \ + __x3 += __ll_B; /* yes, add it in the proper pos. */ \ + \ + (w1) = __x3 + __ll_highpart (__x1); \ + (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ + } while (0) + #endif + +#define __umulsidi3(u, v) \ + ({DIunion __w; \ + umul_ppmm (__w.s.high, __w.s.low, u, v); \ + __w.ll; }) + +typedef int SItype __attribute__ ((mode (SI))); +typedef unsigned int USItype __attribute__ ((mode (SI))); +typedef int DItype __attribute__ ((mode (DI))); +typedef int word_type __attribute__ ((mode (__word__))); + +struct DIstruct {SItype high, low;}; + +typedef union +{ + struct DIstruct s; + DItype ll; +} DIunion; + +DItype +__muldi3 (DItype u, DItype v) +{ + DIunion w; + DIunion uu, vv; + + uu.ll = u, + vv.ll = v; + + w.ll = __umulsidi3 (uu.s.low, vv.s.low); + w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high + + (USItype) uu.s.high * (USItype) vv.s.low); + + return w.ll; +} diff --git a/arch/m68k/lib/muldi3_mm.c b/arch/m68k/lib/muldi3_mm.c deleted file mode 100644 index be4f275649e3..000000000000 --- a/arch/m68k/lib/muldi3_mm.c +++ /dev/null @@ -1,63 +0,0 @@ -/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and - gcc-2.7.2.3/longlong.h which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 - -#define umul_ppmm(w1, w0, u, v) \ - __asm__ ("mulu%.l %3,%1:%0" \ - : "=d" ((USItype)(w0)), \ - "=d" ((USItype)(w1)) \ - : "%0" ((USItype)(u)), \ - "dmi" ((USItype)(v))) - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); - -struct DIstruct {SItype high, low;}; - -typedef union -{ - struct DIstruct s; - DItype ll; -} DIunion; - -DItype -__muldi3 (DItype u, DItype v) -{ - DIunion w; - DIunion uu, vv; - - uu.ll = u, - vv.ll = v; - - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); - - return w.ll; -} diff --git a/arch/m68k/lib/muldi3_no.c b/arch/m68k/lib/muldi3_no.c deleted file mode 100644 index 34af72c30303..000000000000 --- a/arch/m68k/lib/muldi3_no.c +++ /dev/null @@ -1,86 +0,0 @@ -/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and - gcc-2.7.2.3/longlong.h which is: */ -/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc. - -This file is part of GNU CC. - -GNU CC is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2, or (at your option) -any later version. - -GNU CC is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with GNU CC; see the file COPYING. If not, write to -the Free Software Foundation, 59 Temple Place - Suite 330, -Boston, MA 02111-1307, USA. */ - -#define BITS_PER_UNIT 8 -#define SI_TYPE_SIZE 32 - -#define __BITS4 (SI_TYPE_SIZE / 4) -#define __ll_B (1L << (SI_TYPE_SIZE / 2)) -#define __ll_lowpart(t) ((USItype) (t) % __ll_B) -#define __ll_highpart(t) ((USItype) (t) / __ll_B) - -#define umul_ppmm(w1, w0, u, v) \ - do { \ - USItype __x0, __x1, __x2, __x3; \ - USItype __ul, __vl, __uh, __vh; \ - \ - __ul = __ll_lowpart (u); \ - __uh = __ll_highpart (u); \ - __vl = __ll_lowpart (v); \ - __vh = __ll_highpart (v); \ - \ - __x0 = (USItype) __ul * __vl; \ - __x1 = (USItype) __ul * __vh; \ - __x2 = (USItype) __uh * __vl; \ - __x3 = (USItype) __uh * __vh; \ - \ - __x1 += __ll_highpart (__x0);/* this can't give carry */ \ - __x1 += __x2; /* but this indeed can */ \ - if (__x1 < __x2) /* did we get it? */ \ - __x3 += __ll_B; /* yes, add it in the proper pos. */ \ - \ - (w1) = __x3 + __ll_highpart (__x1); \ - (w0) = __ll_lowpart (__x1) * __ll_B + __ll_lowpart (__x0); \ - } while (0) - -#define __umulsidi3(u, v) \ - ({DIunion __w; \ - umul_ppmm (__w.s.high, __w.s.low, u, v); \ - __w.ll; }) - -typedef int SItype __attribute__ ((mode (SI))); -typedef unsigned int USItype __attribute__ ((mode (SI))); -typedef int DItype __attribute__ ((mode (DI))); -typedef int word_type __attribute__ ((mode (__word__))); - -struct DIstruct {SItype high, low;}; - -typedef union -{ - struct DIstruct s; - DItype ll; -} DIunion; - -DItype -__muldi3 (DItype u, DItype v) -{ - DIunion w; - DIunion uu, vv; - - uu.ll = u, - vv.ll = v; - - w.ll = __umulsidi3 (uu.s.low, vv.s.low); - w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high - + (USItype) uu.s.high * (USItype) vv.s.low); - - return w.ll; -} diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c index d399c5f25636..b9a57abfad08 100644 --- a/arch/m68k/lib/string.c +++ b/arch/m68k/lib/string.c @@ -20,226 +20,3 @@ char *strcat(char *dest, const char *src) return __kernel_strcpy(dest + __kernel_strlen(dest), src); } EXPORT_SYMBOL(strcat); - -void *memset(void *s, int c, size_t count) -{ - void *xs = s; - size_t temp, temp1; - - if (!count) - return xs; - c &= 0xff; - c |= c << 8; - c |= c << 16; - if ((long)s & 1) { - char *cs = s; - *cs++ = c; - s = cs; - count--; - } - if (count > 2 && (long)s & 2) { - short *ss = s; - *ss++ = c; - s = ss; - count -= 2; - } - temp = count >> 2; - if (temp) { - long *ls = s; - - asm volatile ( - " movel %1,%2\n" - " andw #7,%2\n" - " lsrl #3,%1\n" - " negw %2\n" - " jmp %%pc@(2f,%2:w:2)\n" - "1: movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - " movel %3,%0@+\n" - "2: dbra %1,1b\n" - " clrw %1\n" - " subql #1,%1\n" - " jpl 1b" - : "=a" (ls), "=d" (temp), "=&d" (temp1) - : "d" (c), "0" (ls), "1" (temp)); - s = ls; - } - if (count & 2) { - short *ss = s; - *ss++ = c; - s = ss; - } - if (count & 1) { - char *cs = s; - *cs = c; - } - return xs; -} -EXPORT_SYMBOL(memset); - -void *memcpy(void *to, const void *from, size_t n) -{ - void *xto = to; - size_t temp, temp1; - - if (!n) - return xto; - if ((long)to & 1) { - char *cto = to; - const char *cfrom = from; - *cto++ = *cfrom++; - to = cto; - from = cfrom; - n--; - } - if (n > 2 && (long)to & 2) { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - n -= 2; - } - temp = n >> 2; - if (temp) { - long *lto = to; - const long *lfrom = from; - - asm volatile ( - " movel %2,%3\n" - " andw #7,%3\n" - " lsrl #3,%2\n" - " negw %3\n" - " jmp %%pc@(1f,%3:w:2)\n" - "4: movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - " movel %0@+,%1@+\n" - "1: dbra %2,4b\n" - " clrw %2\n" - " subql #1,%2\n" - " jpl 4b" - : "=a" (lfrom), "=a" (lto), "=d" (temp), "=&d" (temp1) - : "0" (lfrom), "1" (lto), "2" (temp)); - to = lto; - from = lfrom; - } - if (n & 2) { - short *sto = to; - const short *sfrom = from; - *sto++ = *sfrom++; - to = sto; - from = sfrom; - } - if (n & 1) { - char *cto = to; - const char *cfrom = from; - *cto = *cfrom; - } - return xto; -} -EXPORT_SYMBOL(memcpy); - -void *memmove(void *dest, const void *src, size_t n) -{ - void *xdest = dest; - size_t temp; - - if (!n) - return xdest; - - if (dest < src) { - if ((long)dest & 1) { - char *cdest = dest; - const char *csrc = src; - *cdest++ = *csrc++; - dest = cdest; - src = csrc; - n--; - } - if (n > 2 && (long)dest & 2) { - short *sdest = dest; - const short *ssrc = src; - *sdest++ = *ssrc++; - dest = sdest; - src = ssrc; - n -= 2; - } - temp = n >> 2; - if (temp) { - long *ldest = dest; - const long *lsrc = src; - temp--; - do - *ldest++ = *lsrc++; - while (temp--); - dest = ldest; - src = lsrc; - } - if (n & 2) { - short *sdest = dest; - const short *ssrc = src; - *sdest++ = *ssrc++; - dest = sdest; - src = ssrc; - } - if (n & 1) { - char *cdest = dest; - const char *csrc = src; - *cdest = *csrc; - } - } else { - dest = (char *)dest + n; - src = (const char *)src + n; - if ((long)dest & 1) { - char *cdest = dest; - const char *csrc = src; - *--cdest = *--csrc; - dest = cdest; - src = csrc; - n--; - } - if (n > 2 && (long)dest & 2) { - short *sdest = dest; - const short *ssrc = src; - *--sdest = *--ssrc; - dest = sdest; - src = ssrc; - n -= 2; - } - temp = n >> 2; - if (temp) { - long *ldest = dest; - const long *lsrc = src; - temp--; - do - *--ldest = *--lsrc; - while (temp--); - dest = ldest; - src = lsrc; - } - if (n & 2) { - short *sdest = dest; - const short *ssrc = src; - *--sdest = *--ssrc; - dest = sdest; - src = ssrc; - } - if (n & 1) { - char *cdest = dest; - const char *csrc = src; - *--cdest = *--csrc; - } - } - return xdest; -} -EXPORT_SYMBOL(memmove); diff --git a/arch/m68k/mm/Makefile b/arch/m68k/mm/Makefile index b60270e4954b..09cadf1058d5 100644 --- a/arch/m68k/mm/Makefile +++ b/arch/m68k/mm/Makefile @@ -1,5 +1,9 @@ -ifdef CONFIG_MMU -include arch/m68k/mm/Makefile_mm -else -include arch/m68k/mm/Makefile_no -endif +# +# Makefile for the linux m68k-specific parts of the memory manager. +# + +obj-y := init.o + +obj-$(CONFIG_MMU) += cache.o fault.o hwtest.o +obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o +obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o diff --git a/arch/m68k/mm/Makefile_mm b/arch/m68k/mm/Makefile_mm deleted file mode 100644 index 5eaa43c4cb3c..000000000000 --- a/arch/m68k/mm/Makefile_mm +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the linux m68k-specific parts of the memory manager. -# - -obj-y := cache.o init.o fault.o hwtest.o - -obj-$(CONFIG_MMU_MOTOROLA) += kmap.o memory.o motorola.o -obj-$(CONFIG_MMU_SUN3) += sun3kmap.o sun3mmu.o diff --git a/arch/m68k/mm/Makefile_no b/arch/m68k/mm/Makefile_no deleted file mode 100644 index b54ab6b4b523..000000000000 --- a/arch/m68k/mm/Makefile_no +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the linux m68knommu specific parts of the memory manager. -# - -obj-y += init.o kmap.o diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init_mm.c index 8bc842554e5b..9113c2f17607 100644 --- a/arch/m68k/mm/init_mm.c +++ b/arch/m68k/mm/init_mm.c @@ -32,8 +32,6 @@ #include <asm/sections.h> #include <asm/tlb.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - pg_data_t pg_data_map[MAX_NUMNODES]; EXPORT_SYMBOL(pg_data_map); diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 8a6653f56bd8..7cbd7bd1f8bc 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -38,28 +38,10 @@ #include <asm/system.h> #include <asm/machdep.h> -#undef DEBUG - -extern void die_if_kernel(char *,struct pt_regs *,long); -extern void free_initmem(void); - /* - * BAD_PAGE is the page that is used for page faults when linux - * is out-of-memory. Older versions of linux just did a - * do_exit(), but using this instead means there is less risk - * for a process dying in kernel mode, possibly leaving a inode - * unused etc.. - * - * BAD_PAGETABLE is the accompanying page-table: it is initialized - * to point to BAD_PAGE entries. - * * ZERO_PAGE is a special page that is used for zero-initialized * data and COW. */ -static unsigned long empty_bad_page_table; - -static unsigned long empty_bad_page; - unsigned long empty_zero_page; extern unsigned long memory_start; @@ -77,22 +59,9 @@ void __init paging_init(void) * Make sure start_mem is page aligned, otherwise bootmem and * page_alloc get different views of the world. */ -#ifdef DEBUG - unsigned long start_mem = PAGE_ALIGN(memory_start); -#endif unsigned long end_mem = memory_end & PAGE_MASK; + unsigned long zones_size[MAX_NR_ZONES] = {0, }; -#ifdef DEBUG - printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n", - start_mem, end_mem); -#endif - - /* - * Initialize the bad page table and bad page to point - * to a couple of allocated pages. - */ - empty_bad_page_table = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); - empty_bad_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); empty_zero_page = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); memset((void *)empty_zero_page, 0, PAGE_SIZE); @@ -101,19 +70,8 @@ void __init paging_init(void) */ set_fs (USER_DS); -#ifdef DEBUG - printk (KERN_DEBUG "before free_area_init\n"); - - printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n", - start_mem, end_mem); -#endif - - { - unsigned long zones_size[MAX_NR_ZONES] = {0, }; - - zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; - free_area_init(zones_size); - } + zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT; + free_area_init(zones_size); } void __init mem_init(void) @@ -166,8 +124,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void -free_initmem() +void free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index a373d136b2b2..69345849454b 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -1,5 +1,367 @@ -#ifdef CONFIG_MMU -#include "kmap_mm.c" +/* + * linux/arch/m68k/mm/kmap.c + * + * Copyright (C) 1997 Roman Hodek + * + * 10/01/99 cleaned up the code and changing to the same interface + * used by other architectures /Roman Zippel + */ + +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> + +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/io.h> +#include <asm/system.h> + +#undef DEBUG + +#define PTRTREESIZE (256*1024) + +/* + * For 040/060 we can use the virtual memory area like other architectures, + * but for 020/030 we want to use early termination page descriptor and we + * can't mix this with normal page descriptors, so we have to copy that code + * (mm/vmalloc.c) and return appriorate aligned addresses. + */ + +#ifdef CPU_M68040_OR_M68060_ONLY + +#define IO_SIZE PAGE_SIZE + +static inline struct vm_struct *get_io_area(unsigned long size) +{ + return get_vm_area(size, VM_IOREMAP); +} + + +static inline void free_io_area(void *addr) +{ + vfree((void *)(PAGE_MASK & (unsigned long)addr)); +} + #else -#include "kmap_no.c" + +#define IO_SIZE (256*1024) + +static struct vm_struct *iolist; + +static struct vm_struct *get_io_area(unsigned long size) +{ + unsigned long addr; + struct vm_struct **p, *tmp, *area; + + area = kmalloc(sizeof(*area), GFP_KERNEL); + if (!area) + return NULL; + addr = KMAP_START; + for (p = &iolist; (tmp = *p) ; p = &tmp->next) { + if (size + addr < (unsigned long)tmp->addr) + break; + if (addr > KMAP_END-size) { + kfree(area); + return NULL; + } + addr = tmp->size + (unsigned long)tmp->addr; + } + area->addr = (void *)addr; + area->size = size + IO_SIZE; + area->next = *p; + *p = area; + return area; +} + +static inline void free_io_area(void *addr) +{ + struct vm_struct **p, *tmp; + + if (!addr) + return; + addr = (void *)((unsigned long)addr & -IO_SIZE); + for (p = &iolist ; (tmp = *p) ; p = &tmp->next) { + if (tmp->addr == addr) { + *p = tmp->next; + __iounmap(tmp->addr, tmp->size); + kfree(tmp); + return; + } + } +} + #endif + +/* + * Map some physical address range into the kernel address space. + */ +/* Rewritten by Andreas Schwab to remove all races. */ + +void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) +{ + struct vm_struct *area; + unsigned long virtaddr, retaddr; + long offset; + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + /* + * Don't allow mappings that wrap.. + */ + if (!size || physaddr > (unsigned long)(-size)) + return NULL; + +#ifdef CONFIG_AMIGA + if (MACH_IS_AMIGA) { + if ((physaddr >= 0x40000000) && (physaddr + size < 0x60000000) + && (cacheflag == IOMAP_NOCACHE_SER)) + return (void __iomem *)physaddr; + } +#endif + +#ifdef DEBUG + printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); +#endif + /* + * Mappings have to be aligned + */ + offset = physaddr & (IO_SIZE - 1); + physaddr &= -IO_SIZE; + size = (size + offset + IO_SIZE - 1) & -IO_SIZE; + + /* + * Ok, go for it.. + */ + area = get_io_area(size); + if (!area) + return NULL; + + virtaddr = (unsigned long)area->addr; + retaddr = virtaddr + offset; +#ifdef DEBUG + printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); +#endif + + /* + * add cache and table flags to physical address + */ + if (CPU_IS_040_OR_060) { + physaddr |= (_PAGE_PRESENT | _PAGE_GLOBAL040 | + _PAGE_ACCESSED | _PAGE_DIRTY); + switch (cacheflag) { + case IOMAP_FULL_CACHING: + physaddr |= _PAGE_CACHE040; + break; + case IOMAP_NOCACHE_SER: + default: + physaddr |= _PAGE_NOCACHE_S; + break; + case IOMAP_NOCACHE_NONSER: + physaddr |= _PAGE_NOCACHE; + break; + case IOMAP_WRITETHROUGH: + physaddr |= _PAGE_CACHE040W; + break; + } + } else { + physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); + switch (cacheflag) { + case IOMAP_NOCACHE_SER: + case IOMAP_NOCACHE_NONSER: + default: + physaddr |= _PAGE_NOCACHE030; + break; + case IOMAP_FULL_CACHING: + case IOMAP_WRITETHROUGH: + break; + } + } + + while ((long)size > 0) { +#ifdef DEBUG + if (!(virtaddr & (PTRTREESIZE-1))) + printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr); +#endif + pgd_dir = pgd_offset_k(virtaddr); + pmd_dir = pmd_alloc(&init_mm, pgd_dir, virtaddr); + if (!pmd_dir) { + printk("ioremap: no mem for pmd_dir\n"); + return NULL; + } + + if (CPU_IS_020_OR_030) { + pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr; + physaddr += PTRTREESIZE; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + } else { + pte_dir = pte_alloc_kernel(pmd_dir, virtaddr); + if (!pte_dir) { + printk("ioremap: no mem for pte_dir\n"); + return NULL; + } + + pte_val(*pte_dir) = physaddr; + virtaddr += PAGE_SIZE; + physaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + } +#ifdef DEBUG + printk("\n"); +#endif + flush_tlb_all(); + + return (void __iomem *)retaddr; +} +EXPORT_SYMBOL(__ioremap); + +/* + * Unmap a ioremap()ed region again + */ +void iounmap(void __iomem *addr) +{ +#ifdef CONFIG_AMIGA + if ((!MACH_IS_AMIGA) || + (((unsigned long)addr < 0x40000000) || + ((unsigned long)addr > 0x60000000))) + free_io_area((__force void *)addr); +#else + free_io_area((__force void *)addr); +#endif +} +EXPORT_SYMBOL(iounmap); + +/* + * __iounmap unmaps nearly everything, so be careful + * it doesn't free currently pointer/page tables anymore but it + * wans't used anyway and might be added later. + */ +void __iounmap(void *addr, unsigned long size) +{ + unsigned long virtaddr = (unsigned long)addr; + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + while ((long)size > 0) { + pgd_dir = pgd_offset_k(virtaddr); + if (pgd_bad(*pgd_dir)) { + printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); + pgd_clear(pgd_dir); + return; + } + pmd_dir = pmd_offset(pgd_dir, virtaddr); + + if (CPU_IS_020_OR_030) { + int pmd_off = (virtaddr/PTRTREESIZE) & 15; + int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK; + + if (pmd_type == _PAGE_PRESENT) { + pmd_dir->pmd[pmd_off] = 0; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + continue; + } else if (pmd_type == 0) + continue; + } + + if (pmd_bad(*pmd_dir)) { + printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); + pmd_clear(pmd_dir); + return; + } + pte_dir = pte_offset_kernel(pmd_dir, virtaddr); + + pte_val(*pte_dir) = 0; + virtaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + flush_tlb_all(); +} + +/* + * Set new cache mode for some kernel address space. + * The caller must push data for that range itself, if such data may already + * be in the cache. + */ +void kernel_set_cachemode(void *addr, unsigned long size, int cmode) +{ + unsigned long virtaddr = (unsigned long)addr; + pgd_t *pgd_dir; + pmd_t *pmd_dir; + pte_t *pte_dir; + + if (CPU_IS_040_OR_060) { + switch (cmode) { + case IOMAP_FULL_CACHING: + cmode = _PAGE_CACHE040; + break; + case IOMAP_NOCACHE_SER: + default: + cmode = _PAGE_NOCACHE_S; + break; + case IOMAP_NOCACHE_NONSER: + cmode = _PAGE_NOCACHE; + break; + case IOMAP_WRITETHROUGH: + cmode = _PAGE_CACHE040W; + break; + } + } else { + switch (cmode) { + case IOMAP_NOCACHE_SER: + case IOMAP_NOCACHE_NONSER: + default: + cmode = _PAGE_NOCACHE030; + break; + case IOMAP_FULL_CACHING: + case IOMAP_WRITETHROUGH: + cmode = 0; + } + } + + while ((long)size > 0) { + pgd_dir = pgd_offset_k(virtaddr); + if (pgd_bad(*pgd_dir)) { + printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); + pgd_clear(pgd_dir); + return; + } + pmd_dir = pmd_offset(pgd_dir, virtaddr); + + if (CPU_IS_020_OR_030) { + int pmd_off = (virtaddr/PTRTREESIZE) & 15; + + if ((pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK) == _PAGE_PRESENT) { + pmd_dir->pmd[pmd_off] = (pmd_dir->pmd[pmd_off] & + _CACHEMASK040) | cmode; + virtaddr += PTRTREESIZE; + size -= PTRTREESIZE; + continue; + } + } + + if (pmd_bad(*pmd_dir)) { + printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); + pmd_clear(pmd_dir); + return; + } + pte_dir = pte_offset_kernel(pmd_dir, virtaddr); + + pte_val(*pte_dir) = (pte_val(*pte_dir) & _CACHEMASK040) | cmode; + virtaddr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + flush_tlb_all(); +} +EXPORT_SYMBOL(kernel_set_cachemode); diff --git a/arch/m68k/mm/kmap_mm.c b/arch/m68k/mm/kmap_mm.c deleted file mode 100644 index 69345849454b..000000000000 --- a/arch/m68k/mm/kmap_mm.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * linux/arch/m68k/mm/kmap.c - * - * Copyright (C) 1997 Roman Hodek - * - * 10/01/99 cleaned up the code and changing to the same interface - * used by other architectures /Roman Zippel - */ - -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/io.h> -#include <asm/system.h> - -#undef DEBUG - -#define PTRTREESIZE (256*1024) - -/* - * For 040/060 we can use the virtual memory area like other architectures, - * but for 020/030 we want to use early termination page descriptor and we - * can't mix this with normal page descriptors, so we have to copy that code - * (mm/vmalloc.c) and return appriorate aligned addresses. - */ - -#ifdef CPU_M68040_OR_M68060_ONLY - -#define IO_SIZE PAGE_SIZE - -static inline struct vm_struct *get_io_area(unsigned long size) -{ - return get_vm_area(size, VM_IOREMAP); -} - - -static inline void free_io_area(void *addr) -{ - vfree((void *)(PAGE_MASK & (unsigned long)addr)); -} - -#else - -#define IO_SIZE (256*1024) - -static struct vm_struct *iolist; - -static struct vm_struct *get_io_area(unsigned long size) -{ - unsigned long addr; - struct vm_struct **p, *tmp, *area; - - area = kmalloc(sizeof(*area), GFP_KERNEL); - if (!area) - return NULL; - addr = KMAP_START; - for (p = &iolist; (tmp = *p) ; p = &tmp->next) { - if (size + addr < (unsigned long)tmp->addr) - break; - if (addr > KMAP_END-size) { - kfree(area); - return NULL; - } - addr = tmp->size + (unsigned long)tmp->addr; - } - area->addr = (void *)addr; - area->size = size + IO_SIZE; - area->next = *p; - *p = area; - return area; -} - -static inline void free_io_area(void *addr) -{ - struct vm_struct **p, *tmp; - - if (!addr) - return; - addr = (void *)((unsigned long)addr & -IO_SIZE); - for (p = &iolist ; (tmp = *p) ; p = &tmp->next) { - if (tmp->addr == addr) { - *p = tmp->next; - __iounmap(tmp->addr, tmp->size); - kfree(tmp); - return; - } - } -} - -#endif - -/* - * Map some physical address range into the kernel address space. - */ -/* Rewritten by Andreas Schwab to remove all races. */ - -void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - struct vm_struct *area; - unsigned long virtaddr, retaddr; - long offset; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - /* - * Don't allow mappings that wrap.. - */ - if (!size || physaddr > (unsigned long)(-size)) - return NULL; - -#ifdef CONFIG_AMIGA - if (MACH_IS_AMIGA) { - if ((physaddr >= 0x40000000) && (physaddr + size < 0x60000000) - && (cacheflag == IOMAP_NOCACHE_SER)) - return (void __iomem *)physaddr; - } -#endif - -#ifdef DEBUG - printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag); -#endif - /* - * Mappings have to be aligned - */ - offset = physaddr & (IO_SIZE - 1); - physaddr &= -IO_SIZE; - size = (size + offset + IO_SIZE - 1) & -IO_SIZE; - - /* - * Ok, go for it.. - */ - area = get_io_area(size); - if (!area) - return NULL; - - virtaddr = (unsigned long)area->addr; - retaddr = virtaddr + offset; -#ifdef DEBUG - printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr); -#endif - - /* - * add cache and table flags to physical address - */ - if (CPU_IS_040_OR_060) { - physaddr |= (_PAGE_PRESENT | _PAGE_GLOBAL040 | - _PAGE_ACCESSED | _PAGE_DIRTY); - switch (cacheflag) { - case IOMAP_FULL_CACHING: - physaddr |= _PAGE_CACHE040; - break; - case IOMAP_NOCACHE_SER: - default: - physaddr |= _PAGE_NOCACHE_S; - break; - case IOMAP_NOCACHE_NONSER: - physaddr |= _PAGE_NOCACHE; - break; - case IOMAP_WRITETHROUGH: - physaddr |= _PAGE_CACHE040W; - break; - } - } else { - physaddr |= (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_DIRTY); - switch (cacheflag) { - case IOMAP_NOCACHE_SER: - case IOMAP_NOCACHE_NONSER: - default: - physaddr |= _PAGE_NOCACHE030; - break; - case IOMAP_FULL_CACHING: - case IOMAP_WRITETHROUGH: - break; - } - } - - while ((long)size > 0) { -#ifdef DEBUG - if (!(virtaddr & (PTRTREESIZE-1))) - printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr); -#endif - pgd_dir = pgd_offset_k(virtaddr); - pmd_dir = pmd_alloc(&init_mm, pgd_dir, virtaddr); - if (!pmd_dir) { - printk("ioremap: no mem for pmd_dir\n"); - return NULL; - } - - if (CPU_IS_020_OR_030) { - pmd_dir->pmd[(virtaddr/PTRTREESIZE) & 15] = physaddr; - physaddr += PTRTREESIZE; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - } else { - pte_dir = pte_alloc_kernel(pmd_dir, virtaddr); - if (!pte_dir) { - printk("ioremap: no mem for pte_dir\n"); - return NULL; - } - - pte_val(*pte_dir) = physaddr; - virtaddr += PAGE_SIZE; - physaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - } -#ifdef DEBUG - printk("\n"); -#endif - flush_tlb_all(); - - return (void __iomem *)retaddr; -} -EXPORT_SYMBOL(__ioremap); - -/* - * Unmap a ioremap()ed region again - */ -void iounmap(void __iomem *addr) -{ -#ifdef CONFIG_AMIGA - if ((!MACH_IS_AMIGA) || - (((unsigned long)addr < 0x40000000) || - ((unsigned long)addr > 0x60000000))) - free_io_area((__force void *)addr); -#else - free_io_area((__force void *)addr); -#endif -} -EXPORT_SYMBOL(iounmap); - -/* - * __iounmap unmaps nearly everything, so be careful - * it doesn't free currently pointer/page tables anymore but it - * wans't used anyway and might be added later. - */ -void __iounmap(void *addr, unsigned long size) -{ - unsigned long virtaddr = (unsigned long)addr; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - while ((long)size > 0) { - pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { - printk("iounmap: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); - pgd_clear(pgd_dir); - return; - } - pmd_dir = pmd_offset(pgd_dir, virtaddr); - - if (CPU_IS_020_OR_030) { - int pmd_off = (virtaddr/PTRTREESIZE) & 15; - int pmd_type = pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK; - - if (pmd_type == _PAGE_PRESENT) { - pmd_dir->pmd[pmd_off] = 0; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - continue; - } else if (pmd_type == 0) - continue; - } - - if (pmd_bad(*pmd_dir)) { - printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); - pmd_clear(pmd_dir); - return; - } - pte_dir = pte_offset_kernel(pmd_dir, virtaddr); - - pte_val(*pte_dir) = 0; - virtaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - flush_tlb_all(); -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. - */ -void kernel_set_cachemode(void *addr, unsigned long size, int cmode) -{ - unsigned long virtaddr = (unsigned long)addr; - pgd_t *pgd_dir; - pmd_t *pmd_dir; - pte_t *pte_dir; - - if (CPU_IS_040_OR_060) { - switch (cmode) { - case IOMAP_FULL_CACHING: - cmode = _PAGE_CACHE040; - break; - case IOMAP_NOCACHE_SER: - default: - cmode = _PAGE_NOCACHE_S; - break; - case IOMAP_NOCACHE_NONSER: - cmode = _PAGE_NOCACHE; - break; - case IOMAP_WRITETHROUGH: - cmode = _PAGE_CACHE040W; - break; - } - } else { - switch (cmode) { - case IOMAP_NOCACHE_SER: - case IOMAP_NOCACHE_NONSER: - default: - cmode = _PAGE_NOCACHE030; - break; - case IOMAP_FULL_CACHING: - case IOMAP_WRITETHROUGH: - cmode = 0; - } - } - - while ((long)size > 0) { - pgd_dir = pgd_offset_k(virtaddr); - if (pgd_bad(*pgd_dir)) { - printk("iocachemode: bad pgd(%08lx)\n", pgd_val(*pgd_dir)); - pgd_clear(pgd_dir); - return; - } - pmd_dir = pmd_offset(pgd_dir, virtaddr); - - if (CPU_IS_020_OR_030) { - int pmd_off = (virtaddr/PTRTREESIZE) & 15; - - if ((pmd_dir->pmd[pmd_off] & _DESCTYPE_MASK) == _PAGE_PRESENT) { - pmd_dir->pmd[pmd_off] = (pmd_dir->pmd[pmd_off] & - _CACHEMASK040) | cmode; - virtaddr += PTRTREESIZE; - size -= PTRTREESIZE; - continue; - } - } - - if (pmd_bad(*pmd_dir)) { - printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir)); - pmd_clear(pmd_dir); - return; - } - pte_dir = pte_offset_kernel(pmd_dir, virtaddr); - - pte_val(*pte_dir) = (pte_val(*pte_dir) & _CACHEMASK040) | cmode; - virtaddr += PAGE_SIZE; - size -= PAGE_SIZE; - } - - flush_tlb_all(); -} -EXPORT_SYMBOL(kernel_set_cachemode); diff --git a/arch/m68k/mm/kmap_no.c b/arch/m68k/mm/kmap_no.c deleted file mode 100644 index ece8d5ad4e6c..000000000000 --- a/arch/m68k/mm/kmap_no.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * linux/arch/m68knommu/mm/kmap.c - * - * Copyright (C) 2000 Lineo, <davidm@snapgear.com> - * Copyright (C) 2000-2002 David McCullough <davidm@snapgear.com> - */ - -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/vmalloc.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/io.h> -#include <asm/system.h> - -#undef DEBUG - -/* - * Map some physical address range into the kernel address space. - */ -void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - return (void *)physaddr; -} - -/* - * Unmap a ioremap()ed region again. - */ -void iounmap(void *addr) -{ -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. - */ -void kernel_set_cachemode(void *addr, unsigned long size, int cmode) -{ -} diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index 676960cf022a..f68dce766c0a 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -10,7 +10,6 @@ * Linux/m68k support by Hamish Macdonald */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/unistd.h> @@ -80,7 +79,7 @@ ENTRY(system_call) movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 movel %d1,%a2 - btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) + btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) jne do_trace cmpl #NR_syscalls,%d0 jcc badsys @@ -107,12 +106,12 @@ Luser_return: andl #-THREAD_SIZE,%d1 movel %d1,%a2 1: - move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ jne Lwork_to_do RESTORE_ALL Lwork_to_do: - movel %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ btst #TIF_NEED_RESCHED,%d1 jne reschedule diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index 46c1b18c9dcb..a07b14feed92 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -12,7 +12,6 @@ * M68360 Port by SED Systems, and Lineo. */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/thread_info.h> #include <asm/unistd.h> @@ -76,7 +75,7 @@ ENTRY(system_call) movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 movel %d1,%a2 - btst #(TIF_SYSCALL_TRACE%8),%a2@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) + btst #(TIF_SYSCALL_TRACE%8),%a2@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) jne do_trace cmpl #NR_syscalls,%d0 jcc badsys @@ -103,12 +102,12 @@ Luser_return: andl #-THREAD_SIZE,%d1 movel %d1,%a2 1: - move %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + move %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ jne Lwork_to_do RESTORE_ALL Lwork_to_do: - movel %a2@(TI_FLAGS),%d1 /* thread_info->flags */ + movel %a2@(TINFO_FLAGS),%d1 /* thread_info->flags */ btst #TIF_NEED_RESCHED,%d1 jne reschedule diff --git a/arch/m68k/platform/coldfire/dma.c b/arch/m68k/platform/coldfire/dma.c index e88b95e2cc62..df5ce20d181c 100644 --- a/arch/m68k/platform/coldfire/dma.c +++ b/arch/m68k/platform/coldfire/dma.c @@ -9,6 +9,7 @@ /***************************************************************************/ #include <linux/kernel.h> +#include <linux/module.h> #include <asm/dma.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> @@ -33,7 +34,9 @@ unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS] = { MCFDMA_BASE3, #endif }; +EXPORT_SYMBOL(dma_base_addr); unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; +EXPORT_SYMBOL(dma_device_address); /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index eab63f09965b..27c2b001161e 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -26,7 +26,6 @@ * Bug, speed and maintainability fixes by Philippe De Muyter <phdm@macqel.be> */ -#include <linux/sys.h> #include <linux/linkage.h> #include <asm/unistd.h> #include <asm/thread_info.h> @@ -78,7 +77,7 @@ ENTRY(system_call) movel %d2,%a0 movel %a0@,%a1 /* save top of frame */ movel %sp,%a1@(TASK_THREAD+THREAD_ESP0) - btst #(TIF_SYSCALL_TRACE%8),%a0@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) + btst #(TIF_SYSCALL_TRACE%8),%a0@(TINFO_FLAGS+(31-TIF_SYSCALL_TRACE)/8) bnes 1f movel %d3,%a0 @@ -113,11 +112,11 @@ ret_from_exception: movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 - movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ + movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ andl #(1<<TIF_NEED_RESCHED),%d1 jeq Lkernel_return - movel %a0@(TI_PREEMPTCOUNT),%d1 + movel %a0@(TINFO_PREEMPT),%d1 cmpl #0,%d1 jne Lkernel_return @@ -137,14 +136,14 @@ Luser_return: movel %sp,%d1 /* get thread_info pointer */ andl #-THREAD_SIZE,%d1 /* at base of kernel stack */ movel %d1,%a0 - movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ + movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ jne Lwork_to_do /* still work to do */ Lreturn: RESTORE_USER Lwork_to_do: - movel %a0@(TI_FLAGS),%d1 /* get thread_info->flags */ + movel %a0@(TINFO_FLAGS),%d1 /* get thread_info->flags */ move #0x2000,%sr /* enable intrs again */ btst #TIF_NEED_RESCHED,%d1 jne reschedule diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index 6ae91a499184..c33483824a2e 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -8,7 +8,6 @@ /*****************************************************************************/ -#include <linux/sys.h> #include <linux/linkage.h> #include <linux/init.h> #include <asm/asm-offsets.h> diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index c8437866d3b7..213f2d671669 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -32,8 +32,6 @@ unsigned int __page_offset; EXPORT_SYMBOL(__page_offset); #else -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - static int init_bootmem_done; #endif /* CONFIG_MMU */ diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index 5358f90b4dd2..83ed00a5644a 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -76,15 +76,6 @@ config DEBUG_STACKOVERFLOW provides another way to check stack overflow happened on kernel mode stack usually caused by nested interruption. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config SMTC_IDLE_HOOK_DEBUG bool "Enable additional debug checks before going into CPU idle loop" depends on DEBUG_KERNEL && MIPS_MT_SMTC diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 01af3876cf90..a81176f44c74 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -118,7 +118,7 @@ SECTIONS EXIT_DATA } - PERCPU(1 << CONFIG_MIPS_L1_CACHE_SHIFT, PAGE_SIZE) + PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 279599e9a779..1aadeb42c5a5 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -64,8 +64,6 @@ #endif /* CONFIG_MIPS_MT_SMTC */ -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * We have up to 8 empty zeroed pages so we can map one of the right colour * when needed. This is necessary only on R4000 / R4400 SC and MC versions diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 86af0d7d0771..2623d19f4f4c 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -87,7 +87,7 @@ static void mn10300_cpupic_mask_ack(struct irq_data *d) tmp2 = GxICR(irq); irq_affinity_online[irq] = - any_online_cpu(*d->affinity); + cpumask_any_and(d->affinity, cpu_online_mask); CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & (GxICR_LEVEL | GxICR_ENABLE)) | GxICR_DETECT; tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); @@ -124,7 +124,8 @@ static void mn10300_cpupic_unmask_clear(struct irq_data *d) } else { tmp = GxICR(irq); - irq_affinity_online[irq] = any_online_cpu(*d->affinity); + irq_affinity_online[irq] = cpumask_any_and(d->affinity, + cpu_online_mask); CROSS_GxICR(irq, irq_affinity_online[irq]) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT; tmp = CROSS_GxICR(irq, irq_affinity_online[irq]); } @@ -366,11 +367,11 @@ void migrate_irqs(void) if (irqd_is_per_cpu(data)) continue; - if (cpu_isset(self, data->affinity) && - !cpus_intersects(irq_affinity[irq], cpu_online_map)) { + if (cpumask_test_cpu(self, &data->affinity) && + !cpumask_intersects(&irq_affinity[irq], cpu_online_mask)) { int cpu_id; - cpu_id = first_cpu(cpu_online_map); - cpu_set(cpu_id, data->affinity); + cpu_id = cpumask_first(cpu_online_mask); + cpumask_set_cpu(cpu_id, &data->affinity); } /* We need to operate irq_affinity_online atomically. */ arch_local_cli_save(flags); @@ -381,7 +382,8 @@ void migrate_irqs(void) GxICR(irq) = x & GxICR_LEVEL; tmp = GxICR(irq); - new = any_online_cpu(data->affinity); + new = cpumask_any_and(&data->affinity, + cpu_online_mask); irq_affinity_online[irq] = new; CROSS_GxICR(irq, new) = diff --git a/arch/mn10300/kernel/smp.c b/arch/mn10300/kernel/smp.c index 83fb27912231..9242e9fcc564 100644 --- a/arch/mn10300/kernel/smp.c +++ b/arch/mn10300/kernel/smp.c @@ -309,7 +309,7 @@ static void send_IPI_mask(const cpumask_t *cpumask, int irq) u16 tmp; for (i = 0; i < NR_CPUS; i++) { - if (cpu_isset(i, *cpumask)) { + if (cpumask_test_cpu(i, cpumask)) { /* send IPI */ tmp = CROSS_GxICR(irq, i); CROSS_GxICR(irq, i) = @@ -342,8 +342,8 @@ void send_IPI_allbutself(int irq) { cpumask_t cpumask; - cpumask = cpu_online_map; - cpu_clear(smp_processor_id(), cpumask); + cpumask_copy(&cpumask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &cpumask); send_IPI_mask(&cpumask, irq); } @@ -393,8 +393,8 @@ int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) data.func = func; data.info = info; - data.started = cpu_online_map; - cpu_clear(smp_processor_id(), data.started); + cpumask_copy(&data.started, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &data.started); data.wait = wait; if (wait) data.finished = data.started; @@ -410,14 +410,14 @@ int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) { for (cnt = 0; cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && - !cpus_empty(data.started); + !cpumask_empty(&data.started); cnt++) mdelay(1); if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) { for (cnt = 0; cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && - !cpus_empty(data.finished); + !cpumask_empty(&data.finished); cnt++) mdelay(1); } @@ -428,10 +428,10 @@ int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) } else { /* If timeout value is zero, wait until cpumask has been * cleared */ - while (!cpus_empty(data.started)) + while (!cpumask_empty(&data.started)) barrier(); if (wait) - while (!cpus_empty(data.finished)) + while (!cpumask_empty(&data.finished)) barrier(); } @@ -472,12 +472,12 @@ void stop_this_cpu(void *unused) #endif /* CONFIG_GDBSTUB */ flags = arch_local_cli_save(); - cpu_clear(smp_processor_id(), cpu_online_map); + set_cpu_online(smp_processor_id(), false); while (!stopflag) cpu_relax(); - cpu_set(smp_processor_id(), cpu_online_map); + set_cpu_online(smp_processor_id(), true); arch_local_irq_restore(flags); } @@ -529,12 +529,13 @@ void smp_nmi_call_function_interrupt(void) * execute the function */ smp_mb(); - cpu_clear(smp_processor_id(), nmi_call_data->started); + cpumask_clear_cpu(smp_processor_id(), &nmi_call_data->started); (*func)(info); if (wait) { smp_mb(); - cpu_clear(smp_processor_id(), nmi_call_data->finished); + cpumask_clear_cpu(smp_processor_id(), + &nmi_call_data->finished); } } @@ -657,7 +658,7 @@ int __init start_secondary(void *unused) { smp_cpu_init(); smp_callin(); - while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask)) cpu_relax(); local_flush_tlb(); @@ -780,13 +781,14 @@ static int __init do_boot_cpu(int phy_id) if (send_status == 0) { /* Allow AP to start initializing */ - cpu_set(cpu_id, cpu_callout_map); + cpumask_set_cpu(cpu_id, &cpu_callout_map); /* Wait for setting cpu_callin_map */ timeout = 0; do { udelay(1000); - callin_status = cpu_isset(cpu_id, cpu_callin_map); + callin_status = cpumask_test_cpu(cpu_id, + &cpu_callin_map); } while (callin_status == 0 && timeout++ < 5000); if (callin_status == 0) @@ -796,9 +798,9 @@ static int __init do_boot_cpu(int phy_id) } if (send_status == GxICR_REQUEST || callin_status == 0) { - cpu_clear(cpu_id, cpu_callout_map); - cpu_clear(cpu_id, cpu_callin_map); - cpu_clear(cpu_id, cpu_initialized); + cpumask_clear_cpu(cpu_id, &cpu_callout_map); + cpumask_clear_cpu(cpu_id, &cpu_callin_map); + cpumask_clear_cpu(cpu_id, &cpu_initialized); cpucount--; return 1; } @@ -833,7 +835,7 @@ static void __init smp_callin(void) cpu = smp_processor_id(); timeout = jiffies + (2 * HZ); - if (cpu_isset(cpu, cpu_callin_map)) { + if (cpumask_test_cpu(cpu, &cpu_callin_map)) { printk(KERN_ERR "CPU#%d already present.\n", cpu); BUG(); } @@ -841,7 +843,7 @@ static void __init smp_callin(void) /* Wait for AP startup 2s total */ while (time_before(jiffies, timeout)) { - if (cpu_isset(cpu, cpu_callout_map)) + if (cpumask_test_cpu(cpu, &cpu_callout_map)) break; cpu_relax(); } @@ -861,11 +863,11 @@ static void __init smp_callin(void) smp_store_cpu_info(cpu); /* Allow the boot processor to continue */ - cpu_set(cpu, cpu_callin_map); + cpumask_set_cpu(cpu, &cpu_callin_map); } /** - * smp_online - Set cpu_online_map + * smp_online - Set cpu_online_mask */ static void __init smp_online(void) { @@ -875,7 +877,7 @@ static void __init smp_online(void) local_irq_enable(); - cpu_set(cpu, cpu_online_map); + set_cpu_online(cpu, true); smp_wmb(); } @@ -892,13 +894,13 @@ void __init smp_cpus_done(unsigned int max_cpus) /* * smp_prepare_boot_cpu - Set up stuff for the boot processor. * - * Set up the cpu_online_map, cpu_callout_map and cpu_callin_map of the boot + * Set up the cpu_online_mask, cpu_callout_map and cpu_callin_map of the boot * processor (CPU 0). */ void __devinit smp_prepare_boot_cpu(void) { - cpu_set(0, cpu_callout_map); - cpu_set(0, cpu_callin_map); + cpumask_set_cpu(0, &cpu_callout_map); + cpumask_set_cpu(0, &cpu_callin_map); current_thread_info()->cpu = 0; } @@ -931,16 +933,16 @@ int __devinit __cpu_up(unsigned int cpu) run_wakeup_cpu(cpu); #endif /* CONFIG_HOTPLUG_CPU */ - cpu_set(cpu, smp_commenced_mask); + cpumask_set_cpu(cpu, &smp_commenced_mask); /* Wait 5s total for a response */ for (timeout = 0 ; timeout < 5000 ; timeout++) { - if (cpu_isset(cpu, cpu_online_map)) + if (cpu_online(cpu)) break; udelay(1000); } - BUG_ON(!cpu_isset(cpu, cpu_online_map)); + BUG_ON(!cpu_online(cpu)); return 0; } @@ -986,7 +988,7 @@ int __cpu_disable(void) return -EBUSY; migrate_irqs(); - cpu_clear(cpu, current->active_mm->cpu_vm_mask); + cpumask_clear_cpu(cpu, &mm_cpumask(current->active_mm)); return 0; } @@ -1091,13 +1093,13 @@ static int hotplug_cpu_nmi_call_function(cpumask_t cpumask, do { mn10300_local_dcache_inv_range(start, end); barrier(); - } while (!cpus_empty(nmi_call_func_mask_data.started)); + } while (!cpumask_empty(&nmi_call_func_mask_data.started)); if (wait) { do { mn10300_local_dcache_inv_range(start, end); barrier(); - } while (!cpus_empty(nmi_call_func_mask_data.finished)); + } while (!cpumask_empty(&nmi_call_func_mask_data.finished)); } spin_unlock(&smp_nmi_call_lock); @@ -1108,9 +1110,9 @@ static void restart_wakeup_cpu(void) { unsigned int cpu = smp_processor_id(); - cpu_set(cpu, cpu_callin_map); + cpumask_set_cpu(cpu, &cpu_callin_map); local_flush_tlb(); - cpu_set(cpu, cpu_online_map); + set_cpu_online(cpu, true); smp_wmb(); } @@ -1141,8 +1143,9 @@ static void sleep_cpu(void *unused) static void run_sleep_cpu(unsigned int cpu) { unsigned long flags; - cpumask_t cpumask = cpumask_of(cpu); + cpumask_t cpumask; + cpumask_copy(&cpumask, &cpumask_of(cpu)); flags = arch_local_cli_save(); hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1); hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0); diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S index 968bcd2cb022..6f702a6ab395 100644 --- a/arch/mn10300/kernel/vmlinux.lds.S +++ b/arch/mn10300/kernel/vmlinux.lds.S @@ -70,7 +70,7 @@ SECTIONS .exit.text : { EXIT_TEXT; } .exit.data : { EXIT_DATA; } - PERCPU(32, PAGE_SIZE) + PERCPU_SECTION(32) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/mn10300/mm/cache-smp.c b/arch/mn10300/mm/cache-smp.c index 4a6e9a4b5b27..2d23b9eeee62 100644 --- a/arch/mn10300/mm/cache-smp.c +++ b/arch/mn10300/mm/cache-smp.c @@ -74,7 +74,7 @@ void smp_cache_interrupt(void) break; } - cpu_clear(smp_processor_id(), smp_cache_ipi_map); + cpumask_clear_cpu(smp_processor_id(), &smp_cache_ipi_map); } /** @@ -94,12 +94,12 @@ void smp_cache_call(unsigned long opr_mask, smp_cache_mask = opr_mask; smp_cache_start = start; smp_cache_end = end; - smp_cache_ipi_map = cpu_online_map; - cpu_clear(smp_processor_id(), smp_cache_ipi_map); + cpumask_copy(&smp_cache_ipi_map, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &smp_cache_ipi_map); send_IPI_allbutself(FLUSH_CACHE_IPI); - while (!cpus_empty(smp_cache_ipi_map)) + while (!cpumask_empty(&smp_cache_ipi_map)) /* nothing. lockup detection does not belong here */ mb(); } diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c index 48907cc3bdb7..13801824e3ee 100644 --- a/arch/mn10300/mm/init.c +++ b/arch/mn10300/mm/init.c @@ -37,8 +37,6 @@ #include <asm/tlb.h> #include <asm/sections.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - unsigned long highstart_pfn, highend_pfn; #ifdef CONFIG_MN10300_HAS_ATOMIC_OPS_UNIT diff --git a/arch/mn10300/mm/tlb-smp.c b/arch/mn10300/mm/tlb-smp.c index 0b6a5ad1960e..9a777498a916 100644 --- a/arch/mn10300/mm/tlb-smp.c +++ b/arch/mn10300/mm/tlb-smp.c @@ -64,7 +64,7 @@ void smp_flush_tlb(void *unused) cpu_id = get_cpu(); - if (!cpu_isset(cpu_id, flush_cpumask)) + if (!cpumask_test_cpu(cpu_id, &flush_cpumask)) /* This was a BUG() but until someone can quote me the line * from the intel manual that guarantees an IPI to multiple * CPUs is retried _only_ on the erroring CPUs its staying as a @@ -80,7 +80,7 @@ void smp_flush_tlb(void *unused) local_flush_tlb_page(flush_mm, flush_va); smp_mb__before_clear_bit(); - cpu_clear(cpu_id, flush_cpumask); + cpumask_clear_cpu(cpu_id, &flush_cpumask); smp_mb__after_clear_bit(); out: put_cpu(); @@ -103,11 +103,11 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, * - we do not send IPIs to as-yet unbooted CPUs. */ BUG_ON(!mm); - BUG_ON(cpus_empty(cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + BUG_ON(cpumask_empty(&cpumask)); + BUG_ON(cpumask_test_cpu(smp_processor_id(), &cpumask)); - cpus_and(tmp, cpumask, cpu_online_map); - BUG_ON(!cpus_equal(cpumask, tmp)); + cpumask_and(&tmp, &cpumask, cpu_online_mask); + BUG_ON(!cpumask_equal(&cpumask, &tmp)); /* I'm not happy about this global shared spinlock in the MM hot path, * but we'll see how contended it is. @@ -128,7 +128,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, /* FIXME: if NR_CPUS>=3, change send_IPI_mask */ smp_call_function(smp_flush_tlb, NULL, 1); - while (!cpus_empty(flush_cpumask)) + while (!cpumask_empty(&flush_cpumask)) /* Lockup detection does not belong here */ smp_mb(); @@ -146,11 +146,11 @@ void flush_tlb_mm(struct mm_struct *mm) cpumask_t cpu_mask; preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(smp_processor_id(), &cpu_mask); local_flush_tlb(); - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, FLUSH_ALL); preempt_enable(); @@ -165,11 +165,11 @@ void flush_tlb_current_task(void) cpumask_t cpu_mask; preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(smp_processor_id(), &cpu_mask); local_flush_tlb(); - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, FLUSH_ALL); preempt_enable(); @@ -186,11 +186,11 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) cpumask_t cpu_mask; preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(smp_processor_id(), &cpu_mask); local_flush_tlb_page(mm, va); - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, va); preempt_enable(); diff --git a/arch/parisc/include/asm/smp.h b/arch/parisc/include/asm/smp.h index 2e73623feb6b..e8f8037d872b 100644 --- a/arch/parisc/include/asm/smp.h +++ b/arch/parisc/include/asm/smp.h @@ -33,15 +33,6 @@ extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #endif /* !ASSEMBLY */ -/* - * This magic constant controls our willingness to transfer - * a process across CPUs. Such a transfer incurs cache and tlb - * misses. The current value is inherited from i386. Still needs - * to be tuned for parisc. - */ - -#define PROC_CHANGE_PENALTY 15 /* Schedule penalty */ - #define raw_smp_processor_id() (current_thread_info()->cpu) #else /* CONFIG_SMP */ diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index e1a55849bfa7..fa6f2b8163e0 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -149,7 +149,7 @@ SECTIONS EXIT_DATA } - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 5fa1e273006e..82f364e209fc 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -31,8 +31,6 @@ #include <asm/mmzone.h> #include <asm/sections.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - extern int data_start; #ifdef CONFIG_DISCONTIGMEM @@ -686,7 +684,7 @@ void show_mem(unsigned int filter) int shared = 0, cached = 0; printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); + show_free_areas(filter); #ifndef CONFIG_DISCONTIGMEM i = max_mapnr; while (i-- > 0) { diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index a3128ca0fe11..2f6a22e8e935 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -140,6 +140,8 @@ config PPC select IRQ_PER_CPU select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL + select HAVE_RCU_TABLE_FREE if SMP + select HAVE_SYSCALL_TRACEPOINTS config EARLY_PRINTK bool diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index a597dd77b903..e72dcf6a421d 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -35,27 +35,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUG_PER_CPU_MAPS - bool "Debug access to per_cpu maps" - depends on DEBUG_KERNEL - depends on SMP - default n - ---help--- - Say Y to verify that the per_cpu map being accessed has - been setup. Adds a fair amount of code to kernel memory - and decreases performance. - - Say N if unsure. - config HCALL_STATS bool "Hypervisor call instrumentation" depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 2779f08313a5..22dd6ae84da0 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -530,5 +530,23 @@ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0xC 0x10000000 0x100>; + sdr-base = <0x36C>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts = <0 1 2 3>; + interrupt-parent = <&UIC3>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC3 0x18 1 + 1 &UIC3 0x19 1 + 2 &UIC3 0x1A 1 + 3 &UIC3 0x1B 1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 7c3be5e45748..f913dbe25d35 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -442,6 +442,24 @@ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; + MSI: ppc4xx-msi@400300000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x4 0x00300000 0x100>; + sdr-base = <0x3B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts =<0 1 2 3>; + interrupt-parent = <&UIC0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC0 0xC 1 + 1 &UIC0 0x0D 1 + 2 &UIC0 0x0E 1 + 3 &UIC0 0x0F 1>; + }; + I2O: i2o@400100000 { compatible = "ibm,i2o-440spe"; reg = <0x00000004 0x00100000 0x100>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 89edb16649c3..1613d6e4049e 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -403,5 +403,33 @@ 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x0 0xEF620000 0x100>; + sdr-base = <0x4B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <12>; + interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>; + interrupt-parent = <&UIC2>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC2 0x10 1 + 1 &UIC2 0x11 1 + 2 &UIC2 0x12 1 + 2 &UIC2 0x13 1 + 2 &UIC2 0x14 1 + 2 &UIC2 0x15 1 + 2 &UIC2 0x16 1 + 2 &UIC2 0x17 1 + 2 &UIC2 0x18 1 + 2 &UIC2 0x19 1 + 2 &UIC2 0x1A 1 + 2 &UIC2 0x1B 1 + 2 &UIC2 0x1C 1 + 3 &UIC2 0x1D 1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 761faa7b6964..ac1eb320c7b4 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -176,6 +176,19 @@ sleep = <&pmc 0x00300000>; }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <12 0x8 13 0x8>; + interrupt-parent = < &ipic >; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999A4>; + fsl,tmr-fiper1 = <0x3B9AC9F6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; + enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index cafc1285c140..f6c04d25e916 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -324,6 +324,19 @@ }; }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <68 2 69 2 70 2 71 2>; + interrupt-parent = < &mpic >; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + enet0: ethernet@24000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts index 2bcf3683d223..dae403100f2f 100644 --- a/arch/powerpc/boot/dts/p2020ds.dts +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -178,6 +178,19 @@ }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <68 2 69 2 70 2>; + interrupt-parent = < &mpic >; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + enet0: ethernet@24000 { tbi-handle = <&tbi0>; phy-handle = <&phy0>; diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 3782a58f13be..1d7a05f3021e 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -224,6 +224,19 @@ status = "disabled"; }; + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <68 2 69 2 70 2>; + interrupt-parent = < &mpic >; + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + enet0: ethernet@24000 { fixed-link = <1 1 1000 0 0>; phy-connection-type = "rgmii-id"; diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts index 81636c01d906..d86a3a498118 100644 --- a/arch/powerpc/boot/dts/redwood.dts +++ b/arch/powerpc/boot/dts/redwood.dts @@ -358,8 +358,28 @@ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; + MSI: ppc4xx-msi@400300000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x4 0x00300000 0x100 + 0x4 0x00300000 0x100>; + sdr-base = <0x3B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts =<0 1 2 3>; + interrupt-parent = <&UIC0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC0 0xC 1 + 1 &UIC0 0x0D 1 + 2 &UIC0 0x0E 1 + 3 &UIC0 0x0F 1>; + }; + }; + chosen { linux,stdout-path = "/plb/opb/serial@ef600200"; }; diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index dde1296b8b41..169d039ed402 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -60,4 +60,18 @@ struct dyn_arch_ftrace { #endif +#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__) +#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME +static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) +{ + /* + * Compare the symbol name with the system call name. Skip the .sys or .SyS + * prefix from the symbol name and the sys prefix from the system call name and + * just match the rest. This is only needed on ppc64 since symbol names on + * 32bit do not start with a period so the generic function will work. + */ + return !strcmp(sym + 4, name + 3); +} +#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */ + #endif /* _ASM_POWERPC_FTRACE */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 852b8c1c09db..fd8201dddd4b 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -236,7 +236,7 @@ #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 #define H_GET_MPP_X 0x314 -#define MAX_HCALL_OPCODE H_BEST_ENERGY +#define MAX_HCALL_OPCODE H_GET_MPP_X #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h index abe8532bd14e..bf301ac62f35 100644 --- a/arch/powerpc/include/asm/pgalloc.h +++ b/arch/powerpc/include/asm/pgalloc.h @@ -31,14 +31,29 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage) #endif #ifdef CONFIG_SMP -extern void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift); -extern void pte_free_finish(void); +struct mmu_gather; +extern void tlb_remove_table(struct mmu_gather *, void *); + +static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, int shift) +{ + unsigned long pgf = (unsigned long)table; + BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE); + pgf |= shift; + tlb_remove_table(tlb, (void *)pgf); +} + +static inline void __tlb_remove_table(void *_table) +{ + void *table = (void *)((unsigned long)_table & ~MAX_PGTABLE_INDEX_SIZE); + unsigned shift = (unsigned long)_table & MAX_PGTABLE_INDEX_SIZE; + + pgtable_free(table, shift); +} #else /* CONFIG_SMP */ static inline void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift) { pgtable_free(table, shift); } -static inline void pte_free_finish(void) { } #endif /* !CONFIG_SMP */ static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *ptepage, diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index 880b8c1e6e53..11eb404b5606 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -191,8 +191,6 @@ extern unsigned long __secondary_hold_spinloop; extern unsigned long __secondary_hold_acknowledge; extern char __secondary_hold; -extern irqreturn_t debug_ipi_action(int irq, void *data); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h index 23913e902fc3..b54b2add07be 100644 --- a/arch/powerpc/include/asm/syscall.h +++ b/arch/powerpc/include/asm/syscall.h @@ -15,6 +15,11 @@ #include <linux/sched.h> +/* ftrace syscalls requires exporting the sys_call_table */ +#ifdef CONFIG_FTRACE_SYSCALLS +extern const unsigned long *sys_call_table; +#endif /* CONFIG_FTRACE_SYSCALLS */ + static inline long syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index d8529ef13b23..836f231ec1f0 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -110,7 +110,8 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOERROR 12 /* Force successful syscall return */ #define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ #define TIF_FREEZE 14 /* Freezing for suspend */ -#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ +#define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ +#define TIF_RUNLATCH 16 /* Is the runlatch enabled? */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -127,8 +128,10 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NOERROR (1<<TIF_NOERROR) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) #define _TIF_RUNLATCH (1<<TIF_RUNLATCH) -#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP) +#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT) #define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ _TIF_NOTIFY_RESUME) @@ -139,10 +142,12 @@ static inline struct thread_info *current_thread_info(void) #define TLF_NAPPING 0 /* idle thread enabled NAP mode */ #define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */ #define TLF_RESTORE_SIGMASK 2 /* Restore signal mask in do_signal */ +#define TLF_LAZY_MMU 3 /* tlb_batch is active */ #define _TLF_NAPPING (1 << TLF_NAPPING) #define _TLF_SLEEPING (1 << TLF_SLEEPING) #define _TLF_RESTORE_SIGMASK (1 << TLF_RESTORE_SIGMASK) +#define _TLF_LAZY_MMU (1 << TLF_LAZY_MMU) #ifndef __ASSEMBLY__ #define HAVE_SET_RESTORE_SIGMASK 1 diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9aab36312572..e8b981897d44 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -109,6 +109,7 @@ obj-$(CONFIG_PPC_IO_WORKAROUNDS) += io-workarounds.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index ce1f3e44c24f..bf99cfa6bbfe 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -22,6 +22,7 @@ #include <asm/cacheflush.h> #include <asm/code-patching.h> #include <asm/ftrace.h> +#include <asm/syscall.h> #ifdef CONFIG_DYNAMIC_FTRACE @@ -600,3 +601,10 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) } } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) +unsigned long __init arch_syscall_addr(int nr) +{ + return sys_call_table[nr*2]; +} +#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index a24d37d4cf51..5b428e308666 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -295,17 +295,20 @@ static inline void handle_one_irq(unsigned int irq) unsigned long saved_sp_limit; struct irq_desc *desc; + desc = irq_to_desc(irq); + if (!desc) + return; + /* Switch to the irq stack to handle this */ curtp = current_thread_info(); irqtp = hardirq_ctx[smp_processor_id()]; if (curtp == irqtp) { /* We're already on the irq stack, just handle it */ - generic_handle_irq(irq); + desc->handle_irq(irq, desc); return; } - desc = irq_to_desc(irq); saved_sp_limit = current->thread.ksp_limit; irqtp->task = curtp->task; @@ -557,15 +560,8 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, if (revmap_type == IRQ_HOST_MAP_LEGACY) { if (irq_map[0].host != NULL) { raw_spin_unlock_irqrestore(&irq_big_lock, flags); - /* If we are early boot, we can't free the structure, - * too bad... - * this will be fixed once slab is made available early - * instead of the current cruft - */ - if (mem_init_done) { - of_node_put(host->of_node); - kfree(host); - } + of_node_put(host->of_node); + kfree(host); return NULL; } irq_map[0].host = host; @@ -727,9 +723,7 @@ unsigned int irq_create_mapping(struct irq_host *host, } pr_debug("irq: -> using host @%p\n", host); - /* Check if mapping already exist, if it does, call - * host->ops->map() to update the flags - */ + /* Check if mapping already exists */ virq = irq_find_mapping(host, hwirq); if (virq != NO_IRQ) { pr_debug("irq: -> existing mapping on virq %d\n", virq); @@ -899,10 +893,13 @@ unsigned int irq_radix_revmap_lookup(struct irq_host *host, return irq_find_mapping(host, hwirq); /* - * No rcu_read_lock(ing) needed, the ptr returned can't go under us - * as it's referencing an entry in the static irq_map table. + * The ptr returned references the static global irq_map. + * but freeing an irq can delete nodes along the path to + * do the lookup via call_rcu. */ + rcu_read_lock(); ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq); + rcu_read_unlock(); /* * If found in radix tree, then fine. @@ -1010,14 +1007,23 @@ void irq_free_virt(unsigned int virq, unsigned int count) WARN_ON (virq < NUM_ISA_INTERRUPTS); WARN_ON (count == 0 || (virq + count) > irq_virq_count); + if (virq < NUM_ISA_INTERRUPTS) { + if (virq + count < NUM_ISA_INTERRUPTS) + return; + count =- NUM_ISA_INTERRUPTS - virq; + virq = NUM_ISA_INTERRUPTS; + } + + if (count > irq_virq_count || virq > irq_virq_count - count) { + if (virq > irq_virq_count) + return; + count = irq_virq_count - virq; + } + raw_spin_lock_irqsave(&irq_big_lock, flags); for (i = virq; i < (virq + count); i++) { struct irq_host *host; - if (i < NUM_ISA_INTERRUPTS || - (virq + count) > irq_virq_count) - continue; - host = irq_map[i].host; irq_map[i].hwirq = host->inval_irq; smp_wmb(); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 095043d79946..91e52df3d81d 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -395,6 +395,9 @@ struct task_struct *__switch_to(struct task_struct *prev, struct thread_struct *new_thread, *old_thread; unsigned long flags; struct task_struct *last; +#ifdef CONFIG_PPC_BOOK3S_64 + struct ppc64_tlb_batch *batch; +#endif #ifdef CONFIG_SMP /* avoid complexity of lazy save/restore of fpu @@ -513,7 +516,17 @@ struct task_struct *__switch_to(struct task_struct *prev, old_thread->accum_tb += (current_tb - start_tb); new_thread->start_tb = current_tb; } -#endif +#endif /* CONFIG_PPC64 */ + +#ifdef CONFIG_PPC_BOOK3S_64 + batch = &__get_cpu_var(ppc64_tlb_batch); + if (batch->active) { + current_thread_info()->local_flags |= _TLF_LAZY_MMU; + if (batch->index) + __flush_tlb_pending(batch); + batch->active = 0; + } +#endif /* CONFIG_PPC_BOOK3S_64 */ local_irq_save(flags); @@ -528,6 +541,14 @@ struct task_struct *__switch_to(struct task_struct *prev, hard_irq_disable(); last = _switch(old_thread, new_thread); +#ifdef CONFIG_PPC_BOOK3S_64 + if (current_thread_info()->local_flags & _TLF_LAZY_MMU) { + current_thread_info()->local_flags &= ~_TLF_LAZY_MMU; + batch = &__get_cpu_var(ppc64_tlb_batch); + batch->active = 1; + } +#endif /* CONFIG_PPC_BOOK3S_64 */ + local_irq_restore(flags); return last; diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a6ae1cfad86c..cb22024f2b42 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -29,6 +29,7 @@ #include <linux/signal.h> #include <linux/seccomp.h> #include <linux/audit.h> +#include <trace/syscall.h> #ifdef CONFIG_PPC32 #include <linux/module.h> #endif @@ -40,6 +41,9 @@ #include <asm/pgtable.h> #include <asm/system.h> +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + /* * The parameter save area on the stack is used to store arguments being passed * to callee function and is located at fixed offset from stack pointer. @@ -1710,6 +1714,9 @@ long do_syscall_trace_enter(struct pt_regs *regs) */ ret = -1L; + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_enter(regs, regs->gpr[0]); + if (unlikely(current->audit_context)) { #ifdef CONFIG_PPC64 if (!is_32bit_task()) @@ -1738,6 +1745,9 @@ void do_syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_exit(regs, regs->result); + step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, step); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 4a6f2ec7e761..8ebc6700b98d 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -129,7 +129,7 @@ static irqreturn_t call_function_single_action(int irq, void *data) return IRQ_HANDLED; } -irqreturn_t debug_ipi_action(int irq, void *data) +static irqreturn_t debug_ipi_action(int irq, void *data) { if (crash_ipi_function_ptr) { crash_ipi_function_ptr(get_irq_regs()); diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index b9150f07d266..920276c0f6a1 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -160,7 +160,7 @@ SECTIONS INIT_RAM_FS } - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) . = ALIGN(8); .machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) { diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 6a3997f98dfb..af40c8768a78 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -33,110 +33,6 @@ #include "mmu_decl.h" -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - -#ifdef CONFIG_SMP - -/* - * Handle batching of page table freeing on SMP. Page tables are - * queued up and send to be freed later by RCU in order to avoid - * freeing a page table page that is being walked without locks - */ - -static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur); -static unsigned long pte_freelist_forced_free; - -struct pte_freelist_batch -{ - struct rcu_head rcu; - unsigned int index; - unsigned long tables[0]; -}; - -#define PTE_FREELIST_SIZE \ - ((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \ - / sizeof(unsigned long)) - -static void pte_free_smp_sync(void *arg) -{ - /* Do nothing, just ensure we sync with all CPUs */ -} - -/* This is only called when we are critically out of memory - * (and fail to get a page in pte_free_tlb). - */ -static void pgtable_free_now(void *table, unsigned shift) -{ - pte_freelist_forced_free++; - - smp_call_function(pte_free_smp_sync, NULL, 1); - - pgtable_free(table, shift); -} - -static void pte_free_rcu_callback(struct rcu_head *head) -{ - struct pte_freelist_batch *batch = - container_of(head, struct pte_freelist_batch, rcu); - unsigned int i; - - for (i = 0; i < batch->index; i++) { - void *table = (void *)(batch->tables[i] & ~MAX_PGTABLE_INDEX_SIZE); - unsigned shift = batch->tables[i] & MAX_PGTABLE_INDEX_SIZE; - - pgtable_free(table, shift); - } - - free_page((unsigned long)batch); -} - -static void pte_free_submit(struct pte_freelist_batch *batch) -{ - call_rcu_sched(&batch->rcu, pte_free_rcu_callback); -} - -void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift) -{ - /* This is safe since tlb_gather_mmu has disabled preemption */ - struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur); - unsigned long pgf; - - if (atomic_read(&tlb->mm->mm_users) < 2 || - cpumask_equal(mm_cpumask(tlb->mm), cpumask_of(smp_processor_id()))){ - pgtable_free(table, shift); - return; - } - - if (*batchp == NULL) { - *batchp = (struct pte_freelist_batch *)__get_free_page(GFP_ATOMIC); - if (*batchp == NULL) { - pgtable_free_now(table, shift); - return; - } - (*batchp)->index = 0; - } - BUG_ON(shift > MAX_PGTABLE_INDEX_SIZE); - pgf = (unsigned long)table | shift; - (*batchp)->tables[(*batchp)->index++] = pgf; - if ((*batchp)->index == PTE_FREELIST_SIZE) { - pte_free_submit(*batchp); - *batchp = NULL; - } -} - -void pte_free_finish(void) -{ - /* This is safe since tlb_gather_mmu has disabled preemption */ - struct pte_freelist_batch **batchp = &__get_cpu_var(pte_freelist_cur); - - if (*batchp == NULL) - return; - pte_free_submit(*batchp); - *batchp = NULL; -} - -#endif /* CONFIG_SMP */ - static inline int is_exec_fault(void) { return current->thread.regs && TRAP(current->thread.regs) == 0x400; diff --git a/arch/powerpc/mm/tlb_hash32.c b/arch/powerpc/mm/tlb_hash32.c index 690566b66e8e..27b863c14941 100644 --- a/arch/powerpc/mm/tlb_hash32.c +++ b/arch/powerpc/mm/tlb_hash32.c @@ -71,9 +71,6 @@ void tlb_flush(struct mmu_gather *tlb) */ _tlbia(); } - - /* Push out batch of freed page tables */ - pte_free_finish(); } /* diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c index c14d09f614f3..31f18207970b 100644 --- a/arch/powerpc/mm/tlb_hash64.c +++ b/arch/powerpc/mm/tlb_hash64.c @@ -155,7 +155,7 @@ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) void tlb_flush(struct mmu_gather *tlb) { - struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch); + struct ppc64_tlb_batch *tlbbatch = &get_cpu_var(ppc64_tlb_batch); /* If there's a TLB batch pending, then we must flush it because the * pages are going to be freed and we really don't want to have a CPU @@ -164,8 +164,7 @@ void tlb_flush(struct mmu_gather *tlb) if (tlbbatch->index) __flush_tlb_pending(tlbbatch); - /* Push out batch of freed page tables */ - pte_free_finish(); + put_cpu_var(ppc64_tlb_batch); } /** diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 2a030d89bbc6..0bdad3aecc67 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -299,9 +299,6 @@ EXPORT_SYMBOL(flush_tlb_range); void tlb_flush(struct mmu_gather *tlb) { flush_tlb_mm(tlb->mm); - - /* Push out batch of freed page tables */ - pte_free_finish(); } /* diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 8ee51a252cf1..e6bec74be131 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -261,6 +261,28 @@ static int get_kernel(unsigned long pc, unsigned long mmcra) return is_kernel; } +static bool pmc_overflow(unsigned long val) +{ + if ((int)val < 0) + return true; + + /* + * Events on POWER7 can roll back if a speculative event doesn't + * eventually complete. Unfortunately in some rare cases they will + * raise a performance monitor exception. We need to catch this to + * ensure we reset the PMC. In all cases the PMC will be 256 or less + * cycles from overflow. + * + * We only do this if the first pass fails to find any overflowing + * PMCs because a user might set a period of less than 256 and we + * don't want to mistakenly reset them. + */ + if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256)) + return true; + + return false; +} + static void power4_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) { @@ -281,7 +303,7 @@ static void power4_handle_interrupt(struct pt_regs *regs, for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { val = classic_ctr_read(i); - if (val < 0) { + if (pmc_overflow(val)) { if (oprofile_running && ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); classic_ctr_write(i, reset_value[i]); diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index b72176434ebe..d733d7ca939c 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -57,6 +57,8 @@ config KILAUEA select 405EX select PPC40x_SIMPLE select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC405EX evaluation board. diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index f485fc5f6d5e..e958b6f48ec2 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -74,6 +74,8 @@ config KATMAI select 440SPe select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PCC4xx_MSI help This option enables support for the AMCC PPC440SPe evaluation board. @@ -118,6 +120,8 @@ config CANYONLANDS select 460EX select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI select IBM_NEW_EMAC_RGMII select IBM_NEW_EMAC_ZMII help @@ -144,6 +148,8 @@ config REDWOOD select 460SX select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC460SX Redwood board. diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 449c08c15862..3e4eba603e6b 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -176,14 +176,14 @@ EXPORT_SYMBOL_GPL(iic_get_target_id); #ifdef CONFIG_SMP /* Use the highest interrupt priorities for IPI */ -static inline int iic_ipi_to_irq(int ipi) +static inline int iic_msg_to_irq(int msg) { - return IIC_IRQ_TYPE_IPI + 0xf - ipi; + return IIC_IRQ_TYPE_IPI + 0xf - msg; } -void iic_cause_IPI(int cpu, int mesg) +void iic_message_pass(int cpu, int msg) { - out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - mesg) << 4); + out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - msg) << 4); } struct irq_host *iic_get_irq_host(int node) @@ -192,50 +192,31 @@ struct irq_host *iic_get_irq_host(int node) } EXPORT_SYMBOL_GPL(iic_get_irq_host); -static irqreturn_t iic_ipi_action(int irq, void *dev_id) -{ - int ipi = (int)(long)dev_id; - - switch(ipi) { - case PPC_MSG_CALL_FUNCTION: - generic_smp_call_function_interrupt(); - break; - case PPC_MSG_RESCHEDULE: - scheduler_ipi(); - break; - case PPC_MSG_CALL_FUNC_SINGLE: - generic_smp_call_function_single_interrupt(); - break; - case PPC_MSG_DEBUGGER_BREAK: - debug_ipi_action(0, NULL); - break; - } - return IRQ_HANDLED; -} -static void iic_request_ipi(int ipi, const char *name) +static void iic_request_ipi(int msg) { int virq; - virq = irq_create_mapping(iic_host, iic_ipi_to_irq(ipi)); + virq = irq_create_mapping(iic_host, iic_msg_to_irq(msg)); if (virq == NO_IRQ) { printk(KERN_ERR - "iic: failed to map IPI %s\n", name); + "iic: failed to map IPI %s\n", smp_ipi_name[msg]); return; } - if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, name, - (void *)(long)ipi)) - printk(KERN_ERR - "iic: failed to request IPI %s\n", name); + + /* + * If smp_request_message_ipi encounters an error it will notify + * the error. If a message is not needed it will return non-zero. + */ + if (smp_request_message_ipi(virq, msg)) + irq_dispose_mapping(virq); } void iic_request_IPIs(void) { - iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call"); - iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched"); - iic_request_ipi(PPC_MSG_CALL_FUNC_SINGLE, "IPI-call-single"); -#ifdef CONFIG_DEBUGGER - iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); -#endif /* CONFIG_DEBUGGER */ + iic_request_ipi(PPC_MSG_CALL_FUNCTION); + iic_request_ipi(PPC_MSG_RESCHEDULE); + iic_request_ipi(PPC_MSG_CALL_FUNC_SINGLE); + iic_request_ipi(PPC_MSG_DEBUGGER_BREAK); } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 942dc39d6045..4f60ae6ca358 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -75,7 +75,7 @@ enum { }; extern void iic_init_IRQ(void); -extern void iic_cause_IPI(int cpu, int mesg); +extern void iic_message_pass(int cpu, int msg); extern void iic_request_IPIs(void); extern void iic_setup_cpu(void); diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index d176e6148e3f..dbb641ea90dd 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -152,7 +152,7 @@ static int smp_cell_cpu_bootable(unsigned int nr) return 1; } static struct smp_ops_t bpa_iic_smp_ops = { - .message_pass = iic_cause_IPI, + .message_pass = iic_message_pass, .probe = smp_iic_probe, .kick_cpu = smp_cell_kick_cpu, .setup_cpu = smp_cell_setup_cpu, diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index d775fd148d13..7b4df37ac381 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -7,11 +7,18 @@ config PPC4xx_PCI_EXPRESS depends on PCI && 4xx default n +config PPC4xx_MSI + bool + depends on PCI_MSI + depends on PCI && 4xx + default n + config PPC_MSI_BITMAP bool depends on PCI_MSI default y if MPIC default y if FSL_PCI + default y if PPC4xx_MSI source "arch/powerpc/sysdev/xics/Kconfig" diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 6076e0074a87..0efa990e3344 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif +obj-$(CONFIG_PPC4xx_MSI) += ppc4xx_msi.o obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c new file mode 100644 index 000000000000..367af0241851 --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_msi.c @@ -0,0 +1,276 @@ +/* + * Adding PCI-E MSI support for PPC4XX SoCs. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Authors: Tirumala R Marri <tmarri@apm.com> + * Feng Kan <fkan@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/irq.h> +#include <linux/bootmem.h> +#include <linux/pci.h> +#include <linux/msi.h> +#include <linux/of_platform.h> +#include <linux/interrupt.h> +#include <asm/prom.h> +#include <asm/hw_irq.h> +#include <asm/ppc-pci.h> +#include <boot/dcr.h> +#include <asm/dcr-regs.h> +#include <asm/msi_bitmap.h> + +#define PEIH_TERMADH 0x00 +#define PEIH_TERMADL 0x08 +#define PEIH_MSIED 0x10 +#define PEIH_MSIMK 0x18 +#define PEIH_MSIASS 0x20 +#define PEIH_FLUSH0 0x30 +#define PEIH_FLUSH1 0x38 +#define PEIH_CNTRST 0x48 +#define NR_MSI_IRQS 4 + +struct ppc4xx_msi { + u32 msi_addr_lo; + u32 msi_addr_hi; + void __iomem *msi_regs; + int msi_virqs[NR_MSI_IRQS]; + struct msi_bitmap bitmap; + struct device_node *msi_dev; +}; + +static struct ppc4xx_msi ppc4xx_msi; + +static int ppc4xx_msi_init_allocator(struct platform_device *dev, + struct ppc4xx_msi *msi_data) +{ + int err; + + err = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS, + dev->dev.of_node); + if (err) + return err; + + err = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap); + if (err < 0) { + msi_bitmap_free(&msi_data->bitmap); + return err; + } + + return 0; +} + +static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int int_no = -ENOMEM; + unsigned int virq; + struct msi_msg msg; + struct msi_desc *entry; + struct ppc4xx_msi *msi_data = &ppc4xx_msi; + + list_for_each_entry(entry, &dev->msi_list, list) { + int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1); + if (int_no >= 0) + break; + if (int_no < 0) { + pr_debug("%s: fail allocating msi interrupt\n", + __func__); + } + virq = irq_of_parse_and_map(msi_data->msi_dev, int_no); + if (virq == NO_IRQ) { + dev_err(&dev->dev, "%s: fail mapping irq\n", __func__); + msi_bitmap_free_hwirqs(&msi_data->bitmap, int_no, 1); + return -ENOSPC; + } + dev_dbg(&dev->dev, "%s: virq = %d\n", __func__, virq); + + /* Setup msi address space */ + msg.address_hi = msi_data->msi_addr_hi; + msg.address_lo = msi_data->msi_addr_lo; + + irq_set_msi_desc(virq, entry); + msg.data = int_no; + write_msi_msg(virq, &msg); + } + return 0; +} + +void ppc4xx_teardown_msi_irqs(struct pci_dev *dev) +{ + struct msi_desc *entry; + struct ppc4xx_msi *msi_data = &ppc4xx_msi; + + dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n"); + + list_for_each_entry(entry, &dev->msi_list, list) { + if (entry->irq == NO_IRQ) + continue; + irq_set_msi_desc(entry->irq, NULL); + msi_bitmap_free_hwirqs(&msi_data->bitmap, + virq_to_hw(entry->irq), 1); + irq_dispose_mapping(entry->irq); + } +} + +static int ppc4xx_msi_check_device(struct pci_dev *pdev, int nvec, int type) +{ + dev_dbg(&pdev->dev, "PCIE-MSI:%s called. vec %x type %d\n", + __func__, nvec, type); + if (type == PCI_CAP_ID_MSIX) + pr_debug("ppc4xx msi: MSI-X untested, trying anyway.\n"); + + return 0; +} + +static int ppc4xx_setup_pcieh_hw(struct platform_device *dev, + struct resource res, struct ppc4xx_msi *msi) +{ + const u32 *msi_data; + const u32 *msi_mask; + const u32 *sdr_addr; + dma_addr_t msi_phys; + void *msi_virt; + + sdr_addr = of_get_property(dev->dev.of_node, "sdr-base", NULL); + if (!sdr_addr) + return -1; + + SDR0_WRITE(sdr_addr, (u64)res.start >> 32); /*HIGH addr */ + SDR0_WRITE(sdr_addr + 1, res.start & 0xFFFFFFFF); /* Low addr */ + + + msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi"); + if (msi->msi_dev) + return -ENODEV; + + msi->msi_regs = of_iomap(msi->msi_dev, 0); + if (!msi->msi_regs) { + dev_err(&dev->dev, "of_iomap problem failed\n"); + return -ENOMEM; + } + dev_dbg(&dev->dev, "PCIE-MSI: msi register mapped 0x%x 0x%x\n", + (u32) (msi->msi_regs + PEIH_TERMADH), (u32) (msi->msi_regs)); + + msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys, GFP_KERNEL); + msi->msi_addr_hi = 0x0; + msi->msi_addr_lo = (u32) msi_phys; + dev_dbg(&dev->dev, "PCIE-MSI: msi address 0x%x\n", msi->msi_addr_lo); + + /* Progam the Interrupt handler Termination addr registers */ + out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi); + out_be32(msi->msi_regs + PEIH_TERMADL, msi->msi_addr_lo); + + msi_data = of_get_property(dev->dev.of_node, "msi-data", NULL); + if (!msi_data) + return -1; + msi_mask = of_get_property(dev->dev.of_node, "msi-mask", NULL); + if (!msi_mask) + return -1; + /* Program MSI Expected data and Mask bits */ + out_be32(msi->msi_regs + PEIH_MSIED, *msi_data); + out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask); + + return 0; +} + +static int ppc4xx_of_msi_remove(struct platform_device *dev) +{ + struct ppc4xx_msi *msi = dev->dev.platform_data; + int i; + int virq; + + for (i = 0; i < NR_MSI_IRQS; i++) { + virq = msi->msi_virqs[i]; + if (virq != NO_IRQ) + irq_dispose_mapping(virq); + } + + if (msi->bitmap.bitmap) + msi_bitmap_free(&msi->bitmap); + iounmap(msi->msi_regs); + of_node_put(msi->msi_dev); + kfree(msi); + + return 0; +} + +static int __devinit ppc4xx_msi_probe(struct platform_device *dev) +{ + struct ppc4xx_msi *msi; + struct resource res; + int err = 0; + + msi = &ppc4xx_msi;/*keep the msi data for further use*/ + + dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n"); + + msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL); + if (!msi) { + dev_err(&dev->dev, "No memory for MSI structure\n"); + return -ENOMEM; + } + dev->dev.platform_data = msi; + + /* Get MSI ranges */ + err = of_address_to_resource(dev->dev.of_node, 0, &res); + if (err) { + dev_err(&dev->dev, "%s resource error!\n", + dev->dev.of_node->full_name); + goto error_out; + } + + if (ppc4xx_setup_pcieh_hw(dev, res, msi)) + goto error_out; + + err = ppc4xx_msi_init_allocator(dev, msi); + if (err) { + dev_err(&dev->dev, "Error allocating MSI bitmap\n"); + goto error_out; + } + + ppc_md.setup_msi_irqs = ppc4xx_setup_msi_irqs; + ppc_md.teardown_msi_irqs = ppc4xx_teardown_msi_irqs; + ppc_md.msi_check_device = ppc4xx_msi_check_device; + return err; + +error_out: + ppc4xx_of_msi_remove(dev); + return err; +} +static const struct of_device_id ppc4xx_msi_ids[] = { + { + .compatible = "amcc,ppc4xx-msi", + }, + {} +}; +static struct platform_driver ppc4xx_msi_driver = { + .probe = ppc4xx_msi_probe, + .remove = ppc4xx_of_msi_remove, + .driver = { + .name = "ppc4xx-msi", + .owner = THIS_MODULE, + .of_match_table = ppc4xx_msi_ids, + }, + +}; + +static __init int ppc4xx_msi_init(void) +{ + return platform_driver_register(&ppc4xx_msi_driver); +} + +subsys_initcall(ppc4xx_msi_init); diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 4a7f14079e03..ff2d2371b2e9 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -230,17 +230,6 @@ config SYSVIPC_COMPAT config AUDIT_ARCH def_bool y -config S390_EXEC_PROTECT - def_bool y - prompt "Data execute protection" - help - This option allows to enable a buffer overflow protection for user - space programs and it also selects the addressing mode option above. - The kernel parameter noexec=on will enable this feature and also - switch the addressing modes, default is disabled. Enabling this (via - kernel parameter) on machines earlier than IBM System z9 this will - reduce system performance. - comment "Code generation options" choice diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 5c91995b74e4..24bff4f1cc52 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -130,9 +130,7 @@ static void appldata_work_fn(struct work_struct *work) { struct list_head *lh; struct appldata_ops *ops; - int i; - i = 0; get_online_cpus(); mutex_lock(&appldata_ops_mutex); list_for_each(lh, &appldata_ops_list) { diff --git a/arch/s390/include/asm/cmpxchg.h b/arch/s390/include/asm/cmpxchg.h index 7488e52efa97..81d7908416cf 100644 --- a/arch/s390/include/asm/cmpxchg.h +++ b/arch/s390/include/asm/cmpxchg.h @@ -167,7 +167,6 @@ static inline unsigned long __cmpxchg(void *ptr, unsigned long old, #ifdef CONFIG_64BIT #define cmpxchg64(ptr, o, n) \ ({ \ - BUILD_BUG_ON(sizeof(*(ptr)) != 8); \ cmpxchg((ptr), (o), (n)); \ }) #else /* CONFIG_64BIT */ diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index 10c029cfcc7d..64b61bf72e93 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -196,18 +196,6 @@ do { \ } while (0) #endif /* __s390x__ */ -/* - * An executable for which elf_read_implies_exec() returns TRUE will - * have the READ_IMPLIES_EXEC personality flag set automatically. - */ -#define elf_read_implies_exec(ex, executable_stack) \ -({ \ - if (current->mm->context.noexec && \ - executable_stack != EXSTACK_DISABLE_X) \ - disable_noexec(current->mm, current); \ - current->mm->context.noexec == 0; \ -}) - #define STACK_RND_MASK 0x7ffUL #define ARCH_DLINFO \ diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index b56403c2df28..799ed0f1643d 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -111,21 +111,10 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, { pmd_t *pmdp = (pmd_t *) ptep; - if (!MACHINE_HAS_IDTE) { - __pmd_csp(pmdp); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); - __pmd_csp(pmdp); - } - return; - } - - __pmd_idte(address, pmdp); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); + if (MACHINE_HAS_IDTE) __pmd_idte(address, pmdp); - } - return; + else + __pmd_csp(pmdp); } #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index db14a311f1d2..1544b90bd6d6 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -15,6 +15,7 @@ enum interruption_class { EXTINT_VRT, EXTINT_SCP, EXTINT_IUC, + EXTINT_CPM, IOINT_QAI, IOINT_QDI, IOINT_DAS, diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index 65e172f8209d..228cf0b295db 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -124,7 +124,7 @@ struct _lowcore { /* Address space pointer. */ __u32 kernel_asce; /* 0x02ac */ __u32 user_asce; /* 0x02b0 */ - __u32 user_exec_asce; /* 0x02b4 */ + __u32 current_pid; /* 0x02b4 */ /* SMP info area */ __u32 cpu_nr; /* 0x02b8 */ @@ -255,7 +255,7 @@ struct _lowcore { /* Address space pointer. */ __u64 kernel_asce; /* 0x0310 */ __u64 user_asce; /* 0x0318 */ - __u64 user_exec_asce; /* 0x0320 */ + __u64 current_pid; /* 0x0320 */ /* SMP info area */ __u32 cpu_nr; /* 0x0328 */ diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h index 78522cdefdd4..82d0847896a0 100644 --- a/arch/s390/include/asm/mmu.h +++ b/arch/s390/include/asm/mmu.h @@ -5,19 +5,18 @@ typedef struct { atomic_t attach_count; unsigned int flush_mm; spinlock_t list_lock; - struct list_head crst_list; struct list_head pgtable_list; unsigned long asce_bits; unsigned long asce_limit; unsigned long vdso_base; - int noexec; - int has_pgste; /* The mmu context has extended page tables */ - int alloc_pgste; /* cloned contexts will have extended page tables */ + /* Cloned contexts will be created with extended page tables. */ + unsigned int alloc_pgste:1; + /* The mmu context has extended page tables. */ + unsigned int has_pgste:1; } mm_context_t; #define INIT_MM_CONTEXT(name) \ .context.list_lock = __SPIN_LOCK_UNLOCKED(name.context.list_lock), \ - .context.crst_list = LIST_HEAD_INIT(name.context.crst_list), \ .context.pgtable_list = LIST_HEAD_INIT(name.context.pgtable_list), #endif diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h index 8c277caa8d3a..5682f160ff82 100644 --- a/arch/s390/include/asm/mmu_context.h +++ b/arch/s390/include/asm/mmu_context.h @@ -35,11 +35,9 @@ static inline int init_new_context(struct task_struct *tsk, * and if has_pgste is set, it will create extended page * tables. */ - mm->context.noexec = 0; mm->context.has_pgste = 1; mm->context.alloc_pgste = 1; } else { - mm->context.noexec = (user_mode == SECONDARY_SPACE_MODE); mm->context.has_pgste = 0; mm->context.alloc_pgste = 0; } @@ -63,10 +61,8 @@ static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk) S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd); if (user_mode != HOME_SPACE_MODE) { /* Load primary space page table origin. */ - pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd; - S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd); asm volatile(LCTL_OPCODE" 1,1,%0\n" - : : "m" (S390_lowcore.user_exec_asce) ); + : : "m" (S390_lowcore.user_asce) ); } else /* Load home space page table origin. */ asm volatile(LCTL_OPCODE" 13,13,%0" diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 3c987e9ec8d6..accb372ddc7e 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -90,6 +90,7 @@ static inline void copy_page(void *to, void *from) */ typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgste; } pgste_t; typedef struct { unsigned long pte; } pte_t; typedef struct { unsigned long pmd; } pmd_t; typedef struct { unsigned long pud; } pud_t; @@ -97,18 +98,21 @@ typedef struct { unsigned long pgd; } pgd_t; typedef pte_t *pgtable_t; #define pgprot_val(x) ((x).pgprot) +#define pgste_val(x) ((x).pgste) #define pte_val(x) ((x).pte) #define pmd_val(x) ((x).pmd) #define pud_val(x) ((x).pud) #define pgd_val(x) ((x).pgd) +#define __pgste(x) ((pgste_t) { (x) } ) #define __pte(x) ((pte_t) { (x) } ) #define __pmd(x) ((pmd_t) { (x) } ) +#define __pud(x) ((pud_t) { (x) } ) #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -static inline void -page_set_storage_key(unsigned long addr, unsigned int skey, int mapped) +static inline void page_set_storage_key(unsigned long addr, + unsigned char skey, int mapped) { if (!mapped) asm volatile(".insn rrf,0xb22b0000,%0,%1,8,0" @@ -117,15 +121,59 @@ page_set_storage_key(unsigned long addr, unsigned int skey, int mapped) asm volatile("sske %0,%1" : : "d" (skey), "a" (addr)); } -static inline unsigned int -page_get_storage_key(unsigned long addr) +static inline unsigned char page_get_storage_key(unsigned long addr) { - unsigned int skey; + unsigned char skey; - asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0)); + asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr)); return skey; } +static inline int page_reset_referenced(unsigned long addr) +{ + unsigned int ipm; + + asm volatile( + " rrbe 0,%1\n" + " ipm %0\n" + : "=d" (ipm) : "a" (addr) : "cc"); + return !!(ipm & 0x20000000); +} + +/* Bits int the storage key */ +#define _PAGE_CHANGED 0x02 /* HW changed bit */ +#define _PAGE_REFERENCED 0x04 /* HW referenced bit */ +#define _PAGE_FP_BIT 0x08 /* HW fetch protection bit */ +#define _PAGE_ACC_BITS 0xf0 /* HW access control bits */ + +/* + * Test and clear dirty bit in storage key. + * We can't clear the changed bit atomically. This is a potential + * race against modification of the referenced bit. This function + * should therefore only be called if it is not mapped in any + * address space. + */ +#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY +static inline int page_test_and_clear_dirty(unsigned long pfn, int mapped) +{ + unsigned char skey; + + skey = page_get_storage_key(pfn << PAGE_SHIFT); + if (!(skey & _PAGE_CHANGED)) + return 0; + page_set_storage_key(pfn << PAGE_SHIFT, skey & ~_PAGE_CHANGED, mapped); + return 1; +} + +/* + * Test and clear referenced bit in storage key. + */ +#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG +static inline int page_test_and_clear_young(unsigned long pfn) +{ + return page_reset_referenced(pfn << PAGE_SHIFT); +} + struct page; void arch_free_page(struct page *page, int order); void arch_alloc_page(struct page *page, int order); diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h index f7ad8719d02d..5325c89a5843 100644 --- a/arch/s390/include/asm/percpu.h +++ b/arch/s390/include/asm/percpu.h @@ -1,6 +1,9 @@ #ifndef __ARCH_S390_PERCPU__ #define __ARCH_S390_PERCPU__ +#include <linux/preempt.h> +#include <asm/cmpxchg.h> + /* * s390 uses its own implementation for per cpu data, the offset of * the cpu local data area is cached in the cpu's lowcore memory. @@ -16,6 +19,71 @@ #define ARCH_NEEDS_WEAK_PER_CPU #endif +#define arch_irqsafe_cpu_to_op(pcp, val, op) \ +do { \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ old__, new__, prev__; \ + pcp_op_T__ *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + prev__ = *ptr__; \ + do { \ + old__ = prev__; \ + new__ = old__ op (val); \ + switch (sizeof(*ptr__)) { \ + case 8: \ + prev__ = cmpxchg64(ptr__, old__, new__); \ + break; \ + default: \ + prev__ = cmpxchg(ptr__, old__, new__); \ + } \ + } while (prev__ != old__); \ + preempt_enable(); \ +} while (0) + +#define irqsafe_cpu_add_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define irqsafe_cpu_add_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define irqsafe_cpu_add_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) +#define irqsafe_cpu_add_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, +) + +#define irqsafe_cpu_and_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define irqsafe_cpu_and_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define irqsafe_cpu_and_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) +#define irqsafe_cpu_and_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, &) + +#define irqsafe_cpu_or_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define irqsafe_cpu_or_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define irqsafe_cpu_or_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) +#define irqsafe_cpu_or_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, |) + +#define irqsafe_cpu_xor_1(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define irqsafe_cpu_xor_2(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define irqsafe_cpu_xor_4(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) +#define irqsafe_cpu_xor_8(pcp, val) arch_irqsafe_cpu_to_op(pcp, val, ^) + +#define arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) \ +({ \ + typedef typeof(pcp) pcp_op_T__; \ + pcp_op_T__ ret__; \ + pcp_op_T__ *ptr__; \ + preempt_disable(); \ + ptr__ = __this_cpu_ptr(&(pcp)); \ + switch (sizeof(*ptr__)) { \ + case 8: \ + ret__ = cmpxchg64(ptr__, oval, nval); \ + break; \ + default: \ + ret__ = cmpxchg(ptr__, oval, nval); \ + } \ + preempt_enable(); \ + ret__; \ +}) + +#define irqsafe_cpu_cmpxchg_1(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define irqsafe_cpu_cmpxchg_2(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define irqsafe_cpu_cmpxchg_4(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) +#define irqsafe_cpu_cmpxchg_8(pcp, oval, nval) arch_irqsafe_cpu_cmpxchg(pcp, oval, nval) + #include <asm-generic/percpu.h> #endif /* __ARCH_S390_PERCPU__ */ diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h index 082eb4e50e8b..f6314af3b354 100644 --- a/arch/s390/include/asm/pgalloc.h +++ b/arch/s390/include/asm/pgalloc.h @@ -19,14 +19,13 @@ #define check_pgt_cache() do {} while (0) -unsigned long *crst_table_alloc(struct mm_struct *, int); +unsigned long *crst_table_alloc(struct mm_struct *); void crst_table_free(struct mm_struct *, unsigned long *); void crst_table_free_rcu(struct mm_struct *, unsigned long *); unsigned long *page_table_alloc(struct mm_struct *); void page_table_free(struct mm_struct *, unsigned long *); void page_table_free_rcu(struct mm_struct *, unsigned long *); -void disable_noexec(struct mm_struct *, struct task_struct *); static inline void clear_table(unsigned long *s, unsigned long val, size_t n) { @@ -50,9 +49,6 @@ static inline void clear_table(unsigned long *s, unsigned long val, size_t n) static inline void crst_table_init(unsigned long *crst, unsigned long entry) { clear_table(crst, entry, sizeof(unsigned long)*2048); - crst = get_shadow_table(crst); - if (crst) - clear_table(crst, entry, sizeof(unsigned long)*2048); } #ifndef __s390x__ @@ -69,10 +65,7 @@ static inline unsigned long pgd_entry_type(struct mm_struct *mm) #define pmd_free(mm, x) do { } while (0) #define pgd_populate(mm, pgd, pud) BUG() -#define pgd_populate_kernel(mm, pgd, pud) BUG() - #define pud_populate(mm, pud, pmd) BUG() -#define pud_populate_kernel(mm, pud, pmd) BUG() #else /* __s390x__ */ @@ -90,7 +83,7 @@ void crst_table_downgrade(struct mm_struct *, unsigned long limit); static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) { - unsigned long *table = crst_table_alloc(mm, mm->context.noexec); + unsigned long *table = crst_table_alloc(mm); if (table) crst_table_init(table, _REGION3_ENTRY_EMPTY); return (pud_t *) table; @@ -99,43 +92,21 @@ static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address) static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr) { - unsigned long *table = crst_table_alloc(mm, mm->context.noexec); + unsigned long *table = crst_table_alloc(mm); if (table) crst_table_init(table, _SEGMENT_ENTRY_EMPTY); return (pmd_t *) table; } #define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd) -static inline void pgd_populate_kernel(struct mm_struct *mm, - pgd_t *pgd, pud_t *pud) -{ - pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud); -} - static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud) { - pgd_populate_kernel(mm, pgd, pud); - if (mm->context.noexec) { - pgd = get_shadow_table(pgd); - pud = get_shadow_table(pud); - pgd_populate_kernel(mm, pgd, pud); - } -} - -static inline void pud_populate_kernel(struct mm_struct *mm, - pud_t *pud, pmd_t *pmd) -{ - pud_val(*pud) = _REGION3_ENTRY | __pa(pmd); + pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud); } static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { - pud_populate_kernel(mm, pud, pmd); - if (mm->context.noexec) { - pud = get_shadow_table(pud); - pmd = get_shadow_table(pmd); - pud_populate_kernel(mm, pud, pmd); - } + pud_val(*pud) = _REGION3_ENTRY | __pa(pmd); } #endif /* __s390x__ */ @@ -143,29 +114,19 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) static inline pgd_t *pgd_alloc(struct mm_struct *mm) { spin_lock_init(&mm->context.list_lock); - INIT_LIST_HEAD(&mm->context.crst_list); INIT_LIST_HEAD(&mm->context.pgtable_list); - return (pgd_t *) - crst_table_alloc(mm, user_mode == SECONDARY_SPACE_MODE); + return (pgd_t *) crst_table_alloc(mm); } #define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd) -static inline void pmd_populate_kernel(struct mm_struct *mm, - pmd_t *pmd, pte_t *pte) -{ - pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte); -} - static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte) { - pmd_populate_kernel(mm, pmd, pte); - if (mm->context.noexec) { - pmd = get_shadow_table(pmd); - pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE); - } + pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte); } +#define pmd_populate_kernel(mm, pmd, pte) pmd_populate(mm, pmd, pte) + #define pmd_pgtable(pmd) \ (pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 02ace3491c51..c4773a2ef3d3 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -31,9 +31,8 @@ #ifndef __ASSEMBLY__ #include <linux/sched.h> #include <linux/mm_types.h> -#include <asm/bitops.h> #include <asm/bug.h> -#include <asm/processor.h> +#include <asm/page.h> extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096))); extern void paging_init(void); @@ -243,11 +242,13 @@ extern unsigned long VMALLOC_START; /* Software bits in the page table entry */ #define _PAGE_SWT 0x001 /* SW pte type bit t */ #define _PAGE_SWX 0x002 /* SW pte type bit x */ -#define _PAGE_SPECIAL 0x004 /* SW associated with special page */ +#define _PAGE_SWC 0x004 /* SW pte changed bit (for KVM) */ +#define _PAGE_SWR 0x008 /* SW pte referenced bit (for KVM) */ +#define _PAGE_SPECIAL 0x010 /* SW associated with special page */ #define __HAVE_ARCH_PTE_SPECIAL /* Set of bits not changed in pte_modify */ -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_SPECIAL | _PAGE_SWC | _PAGE_SWR) /* Six different types of pages. */ #define _PAGE_TYPE_EMPTY 0x400 @@ -256,8 +257,6 @@ extern unsigned long VMALLOC_START; #define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */ #define _PAGE_TYPE_RO 0x200 #define _PAGE_TYPE_RW 0x000 -#define _PAGE_TYPE_EX_RO 0x202 -#define _PAGE_TYPE_EX_RW 0x002 /* * Only four types for huge pages, using the invalid bit and protection bit @@ -287,8 +286,6 @@ extern unsigned long VMALLOC_START; * _PAGE_TYPE_FILE 11?1 -> 11?1 * _PAGE_TYPE_RO 0100 -> 1100 * _PAGE_TYPE_RW 0000 -> 1000 - * _PAGE_TYPE_EX_RO 0110 -> 1110 - * _PAGE_TYPE_EX_RW 0010 -> 1010 * * pte_none is true for bits combinations 1000, 1010, 1100, 1110 * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001 @@ -297,14 +294,17 @@ extern unsigned long VMALLOC_START; */ /* Page status table bits for virtualization */ -#define RCP_PCL_BIT 55 -#define RCP_HR_BIT 54 -#define RCP_HC_BIT 53 -#define RCP_GR_BIT 50 -#define RCP_GC_BIT 49 - -/* User dirty bit for KVM's migration feature */ -#define KVM_UD_BIT 47 +#define RCP_ACC_BITS 0xf000000000000000UL +#define RCP_FP_BIT 0x0800000000000000UL +#define RCP_PCL_BIT 0x0080000000000000UL +#define RCP_HR_BIT 0x0040000000000000UL +#define RCP_HC_BIT 0x0020000000000000UL +#define RCP_GR_BIT 0x0004000000000000UL +#define RCP_GC_BIT 0x0002000000000000UL + +/* User dirty / referenced bit for KVM's migration feature */ +#define KVM_UR_BIT 0x0000800000000000UL +#define KVM_UC_BIT 0x0000400000000000UL #ifndef __s390x__ @@ -377,85 +377,54 @@ extern unsigned long VMALLOC_START; #define _ASCE_USER_BITS (_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \ _ASCE_ALT_EVENT) -/* Bits int the storage key */ -#define _PAGE_CHANGED 0x02 /* HW changed bit */ -#define _PAGE_REFERENCED 0x04 /* HW referenced bit */ - /* * Page protection definitions. */ #define PAGE_NONE __pgprot(_PAGE_TYPE_NONE) #define PAGE_RO __pgprot(_PAGE_TYPE_RO) #define PAGE_RW __pgprot(_PAGE_TYPE_RW) -#define PAGE_EX_RO __pgprot(_PAGE_TYPE_EX_RO) -#define PAGE_EX_RW __pgprot(_PAGE_TYPE_EX_RW) #define PAGE_KERNEL PAGE_RW #define PAGE_COPY PAGE_RO /* - * Dependent on the EXEC_PROTECT option s390 can do execute protection. - * Write permission always implies read permission. In theory with a - * primary/secondary page table execute only can be implemented but - * it would cost an additional bit in the pte to distinguish all the - * different pte types. To avoid that execute permission currently - * implies read permission as well. + * On s390 the page table entry has an invalid bit and a read-only bit. + * Read permission implies execute permission and write permission + * implies read permission. */ /*xwr*/ #define __P000 PAGE_NONE #define __P001 PAGE_RO #define __P010 PAGE_RO #define __P011 PAGE_RO -#define __P100 PAGE_EX_RO -#define __P101 PAGE_EX_RO -#define __P110 PAGE_EX_RO -#define __P111 PAGE_EX_RO +#define __P100 PAGE_RO +#define __P101 PAGE_RO +#define __P110 PAGE_RO +#define __P111 PAGE_RO #define __S000 PAGE_NONE #define __S001 PAGE_RO #define __S010 PAGE_RW #define __S011 PAGE_RW -#define __S100 PAGE_EX_RO -#define __S101 PAGE_EX_RO -#define __S110 PAGE_EX_RW -#define __S111 PAGE_EX_RW - -#ifndef __s390x__ -# define PxD_SHADOW_SHIFT 1 -#else /* __s390x__ */ -# define PxD_SHADOW_SHIFT 2 -#endif /* __s390x__ */ +#define __S100 PAGE_RO +#define __S101 PAGE_RO +#define __S110 PAGE_RW +#define __S111 PAGE_RW -static inline void *get_shadow_table(void *table) +static inline int mm_exclusive(struct mm_struct *mm) { - unsigned long addr, offset; - struct page *page; - - addr = (unsigned long) table; - offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1); - page = virt_to_page((void *)(addr ^ offset)); - return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL); + return likely(mm == current->active_mm && + atomic_read(&mm->context.attach_count) <= 1); } -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t entry) +static inline int mm_has_pgste(struct mm_struct *mm) { - *ptep = entry; - if (mm->context.noexec) { - if (!(pte_val(entry) & _PAGE_INVALID) && - (pte_val(entry) & _PAGE_SWX)) - pte_val(entry) |= _PAGE_RO; - else - pte_val(entry) = _PAGE_TYPE_EMPTY; - ptep[PTRS_PER_PTE] = entry; - } +#ifdef CONFIG_PGSTE + if (unlikely(mm->context.has_pgste)) + return 1; +#endif + return 0; } - /* * pgd/pmd/pte query functions */ @@ -568,52 +537,127 @@ static inline int pte_special(pte_t pte) } #define __HAVE_ARCH_PTE_SAME -#define pte_same(a,b) (pte_val(a) == pte_val(b)) +static inline int pte_same(pte_t a, pte_t b) +{ + return pte_val(a) == pte_val(b); +} -static inline void rcp_lock(pte_t *ptep) +static inline pgste_t pgste_get_lock(pte_t *ptep) { + unsigned long new = 0; #ifdef CONFIG_PGSTE - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); + unsigned long old; + preempt_disable(); - while (test_and_set_bit(RCP_PCL_BIT, pgste)) - ; + asm( + " lg %0,%2\n" + "0: lgr %1,%0\n" + " nihh %0,0xff7f\n" /* clear RCP_PCL_BIT in old */ + " oihh %1,0x0080\n" /* set RCP_PCL_BIT in new */ + " csg %0,%1,%2\n" + " jl 0b\n" + : "=&d" (old), "=&d" (new), "=Q" (ptep[PTRS_PER_PTE]) + : "Q" (ptep[PTRS_PER_PTE]) : "cc"); #endif + return __pgste(new); } -static inline void rcp_unlock(pte_t *ptep) +static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - clear_bit(RCP_PCL_BIT, pgste); + asm( + " nihh %1,0xff7f\n" /* clear RCP_PCL_BIT */ + " stg %1,%0\n" + : "=Q" (ptep[PTRS_PER_PTE]) + : "d" (pgste_val(pgste)), "Q" (ptep[PTRS_PER_PTE]) : "cc"); preempt_enable(); #endif } -/* forward declaration for SetPageUptodate in page-flags.h*/ -static inline void page_clear_dirty(struct page *page, int mapped); -#include <linux/page-flags.h> - -static inline void ptep_rcp_copy(pte_t *ptep) +static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE - struct page *page = virt_to_page(pte_val(*ptep)); - unsigned int skey; - unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - - skey = page_get_storage_key(page_to_phys(page)); - if (skey & _PAGE_CHANGED) { - set_bit_simple(RCP_GC_BIT, pgste); - set_bit_simple(KVM_UD_BIT, pgste); + unsigned long pfn, bits; + unsigned char skey; + + pfn = pte_val(*ptep) >> PAGE_SHIFT; + skey = page_get_storage_key(pfn); + bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); + /* Clear page changed & referenced bit in the storage key */ + if (bits) { + skey ^= bits; + page_set_storage_key(pfn, skey, 1); } - if (skey & _PAGE_REFERENCED) - set_bit_simple(RCP_GR_BIT, pgste); - if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) { - SetPageDirty(page); - set_bit_simple(KVM_UD_BIT, pgste); - } - if (test_and_clear_bit_simple(RCP_HR_BIT, pgste)) - SetPageReferenced(page); + /* Transfer page changed & referenced bit to guest bits in pgste */ + pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ + /* Get host changed & referenced bits from pgste */ + bits |= (pgste_val(pgste) & (RCP_HR_BIT | RCP_HC_BIT)) >> 52; + /* Clear host bits in pgste. */ + pgste_val(pgste) &= ~(RCP_HR_BIT | RCP_HC_BIT); + pgste_val(pgste) &= ~(RCP_ACC_BITS | RCP_FP_BIT); + /* Copy page access key and fetch protection bit to pgste */ + pgste_val(pgste) |= + (unsigned long) (skey & (_PAGE_ACC_BITS | _PAGE_FP_BIT)) << 56; + /* Transfer changed and referenced to kvm user bits */ + pgste_val(pgste) |= bits << 45; /* KVM_UR_BIT & KVM_UC_BIT */ + /* Transfer changed & referenced to pte sofware bits */ + pte_val(*ptep) |= bits << 1; /* _PAGE_SWR & _PAGE_SWC */ #endif + return pgste; + +} + +static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + int young; + + young = page_reset_referenced(pte_val(*ptep) & PAGE_MASK); + /* Transfer page referenced bit to pte software bit (host view) */ + if (young || (pgste_val(pgste) & RCP_HR_BIT)) + pte_val(*ptep) |= _PAGE_SWR; + /* Clear host referenced bit in pgste. */ + pgste_val(pgste) &= ~RCP_HR_BIT; + /* Transfer page referenced bit to guest bit in pgste */ + pgste_val(pgste) |= (unsigned long) young << 50; /* set RCP_GR_BIT */ +#endif + return pgste; + +} + +static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) +{ +#ifdef CONFIG_PGSTE + unsigned long pfn; + unsigned long okey, nkey; + + pfn = pte_val(*ptep) >> PAGE_SHIFT; + okey = nkey = page_get_storage_key(pfn); + nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); + /* Set page access key and fetch protection bit from pgste */ + nkey |= (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; + if (okey != nkey) + page_set_storage_key(pfn, nkey, 1); +#endif +} + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t entry) +{ + pgste_t pgste; + + if (mm_has_pgste(mm)) { + pgste = pgste_get_lock(ptep); + pgste_set_pte(ptep, pgste); + *ptep = entry; + pgste_set_unlock(ptep, pgste); + } else + *ptep = entry; } /* @@ -627,19 +671,19 @@ static inline int pte_write(pte_t pte) static inline int pte_dirty(pte_t pte) { - /* A pte is neither clean nor dirty on s/390. The dirty bit - * is in the storage key. See page_test_and_clear_dirty for - * details. - */ +#ifdef CONFIG_PGSTE + if (pte_val(pte) & _PAGE_SWC) + return 1; +#endif return 0; } static inline int pte_young(pte_t pte) { - /* A pte is neither young nor old on s/390. The young bit - * is in the storage key. See page_test_and_clear_young for - * details. - */ +#ifdef CONFIG_PGSTE + if (pte_val(pte) & _PAGE_SWR) + return 1; +#endif return 0; } @@ -647,64 +691,30 @@ static inline int pte_young(pte_t pte) * pgd/pmd/pte modification functions */ -#ifndef __s390x__ - -#define pgd_clear(pgd) do { } while (0) -#define pud_clear(pud) do { } while (0) - -#else /* __s390x__ */ - -static inline void pgd_clear_kernel(pgd_t * pgd) +static inline void pgd_clear(pgd_t *pgd) { +#ifdef __s390x__ if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2) pgd_val(*pgd) = _REGION2_ENTRY_EMPTY; +#endif } -static inline void pgd_clear(pgd_t * pgd) -{ - pgd_t *shadow = get_shadow_table(pgd); - - pgd_clear_kernel(pgd); - if (shadow) - pgd_clear_kernel(shadow); -} - -static inline void pud_clear_kernel(pud_t *pud) +static inline void pud_clear(pud_t *pud) { +#ifdef __s390x__ if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) pud_val(*pud) = _REGION3_ENTRY_EMPTY; +#endif } -static inline void pud_clear(pud_t *pud) -{ - pud_t *shadow = get_shadow_table(pud); - - pud_clear_kernel(pud); - if (shadow) - pud_clear_kernel(shadow); -} - -#endif /* __s390x__ */ - -static inline void pmd_clear_kernel(pmd_t * pmdp) +static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY; } -static inline void pmd_clear(pmd_t *pmd) -{ - pmd_t *shadow = get_shadow_table(pmd); - - pmd_clear_kernel(pmd); - if (shadow) - pmd_clear_kernel(shadow); -} - static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (mm->context.noexec) - pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY; } /* @@ -734,35 +744,27 @@ static inline pte_t pte_mkwrite(pte_t pte) static inline pte_t pte_mkclean(pte_t pte) { - /* The only user of pte_mkclean is the fork() code. - We must *not* clear the *physical* page dirty bit - just because fork() wants to clear the dirty bit in - *one* of the page's mappings. So we just do nothing. */ +#ifdef CONFIG_PGSTE + pte_val(pte) &= ~_PAGE_SWC; +#endif return pte; } static inline pte_t pte_mkdirty(pte_t pte) { - /* We do not explicitly set the dirty bit because the - * sske instruction is slow. It is faster to let the - * next instruction set the dirty bit. - */ return pte; } static inline pte_t pte_mkold(pte_t pte) { - /* S/390 doesn't keep its dirty/referenced bit in the pte. - * There is no point in clearing the real referenced bit. - */ +#ifdef CONFIG_PGSTE + pte_val(pte) &= ~_PAGE_SWR; +#endif return pte; } static inline pte_t pte_mkyoung(pte_t pte) { - /* S/390 doesn't keep its dirty/referenced bit in the pte. - * There is no point in setting the real referenced bit. - */ return pte; } @@ -800,62 +802,60 @@ static inline pte_t pte_mkhuge(pte_t pte) } #endif -#ifdef CONFIG_PGSTE /* - * Get (and clear) the user dirty bit for a PTE. + * Get (and clear) the user dirty bit for a pte. */ -static inline int kvm_s390_test_and_clear_page_dirty(struct mm_struct *mm, - pte_t *ptep) +static inline int ptep_test_and_clear_user_dirty(struct mm_struct *mm, + pte_t *ptep) { - int dirty; - unsigned long *pgste; - struct page *page; - unsigned int skey; - - if (!mm->context.has_pgste) - return -EINVAL; - rcp_lock(ptep); - pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - page = virt_to_page(pte_val(*ptep)); - skey = page_get_storage_key(page_to_phys(page)); - if (skey & _PAGE_CHANGED) { - set_bit_simple(RCP_GC_BIT, pgste); - set_bit_simple(KVM_UD_BIT, pgste); + pgste_t pgste; + int dirty = 0; + + if (mm_has_pgste(mm)) { + pgste = pgste_get_lock(ptep); + pgste = pgste_update_all(ptep, pgste); + dirty = !!(pgste_val(pgste) & KVM_UC_BIT); + pgste_val(pgste) &= ~KVM_UC_BIT; + pgste_set_unlock(ptep, pgste); + return dirty; } - if (test_and_clear_bit_simple(RCP_HC_BIT, pgste)) { - SetPageDirty(page); - set_bit_simple(KVM_UD_BIT, pgste); - } - dirty = test_and_clear_bit_simple(KVM_UD_BIT, pgste); - if (skey & _PAGE_CHANGED) - page_clear_dirty(page, 1); - rcp_unlock(ptep); return dirty; } -#endif + +/* + * Get (and clear) the user referenced bit for a pte. + */ +static inline int ptep_test_and_clear_user_young(struct mm_struct *mm, + pte_t *ptep) +{ + pgste_t pgste; + int young = 0; + + if (mm_has_pgste(mm)) { + pgste = pgste_get_lock(ptep); + pgste = pgste_update_young(ptep, pgste); + young = !!(pgste_val(pgste) & KVM_UR_BIT); + pgste_val(pgste) &= ~KVM_UR_BIT; + pgste_set_unlock(ptep, pgste); + } + return young; +} #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) { -#ifdef CONFIG_PGSTE - unsigned long physpage; - int young; - unsigned long *pgste; + pgste_t pgste; + pte_t pte; - if (!vma->vm_mm->context.has_pgste) - return 0; - physpage = pte_val(*ptep) & PAGE_MASK; - pgste = (unsigned long *) (ptep + PTRS_PER_PTE); - - young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0); - rcp_lock(ptep); - if (young) - set_bit_simple(RCP_GR_BIT, pgste); - young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste); - rcp_unlock(ptep); - return young; -#endif + if (mm_has_pgste(vma->vm_mm)) { + pgste = pgste_get_lock(ptep); + pgste = pgste_update_young(ptep, pgste); + pte = *ptep; + *ptep = pte_mkold(pte); + pgste_set_unlock(ptep, pgste); + return pte_young(pte); + } return 0; } @@ -867,10 +867,7 @@ static inline int ptep_clear_flush_young(struct vm_area_struct *vma, * On s390 reference bits are in storage key and never in TLB * With virtualization we handle the reference bit, without we * we can simply return */ -#ifdef CONFIG_PGSTE return ptep_test_and_clear_young(vma, address, ptep); -#endif - return 0; } static inline void __ptep_ipte(unsigned long address, pte_t *ptep) @@ -890,25 +887,6 @@ static inline void __ptep_ipte(unsigned long address, pte_t *ptep) } } -static inline void ptep_invalidate(struct mm_struct *mm, - unsigned long address, pte_t *ptep) -{ - if (mm->context.has_pgste) { - rcp_lock(ptep); - __ptep_ipte(address, ptep); - ptep_rcp_copy(ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - rcp_unlock(ptep); - return; - } - __ptep_ipte(address, ptep); - pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (mm->context.noexec) { - __ptep_ipte(address, ptep + PTRS_PER_PTE); - pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY; - } -} - /* * This is hard to understand. ptep_get_and_clear and ptep_clear_flush * both clear the TLB for the unmapped pte. The reason is that @@ -923,24 +901,72 @@ static inline void ptep_invalidate(struct mm_struct *mm, * is a nop. */ #define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define ptep_get_and_clear(__mm, __address, __ptep) \ -({ \ - pte_t __pte = *(__ptep); \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - ptep_invalidate(__mm, __address, __ptep); \ - else \ - pte_clear((__mm), (__address), (__ptep)); \ - __pte; \ -}) +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long address, pte_t *ptep) +{ + pgste_t pgste; + pte_t pte; + + mm->context.flush_mm = 1; + if (mm_has_pgste(mm)) + pgste = pgste_get_lock(ptep); + + pte = *ptep; + if (!mm_exclusive(mm)) + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + + if (mm_has_pgste(mm)) { + pgste = pgste_update_all(&pte, pgste); + pgste_set_unlock(ptep, pgste); + } + return pte; +} + +#define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION +static inline pte_t ptep_modify_prot_start(struct mm_struct *mm, + unsigned long address, + pte_t *ptep) +{ + pte_t pte; + + mm->context.flush_mm = 1; + if (mm_has_pgste(mm)) + pgste_get_lock(ptep); + + pte = *ptep; + if (!mm_exclusive(mm)) + __ptep_ipte(address, ptep); + return pte; +} + +static inline void ptep_modify_prot_commit(struct mm_struct *mm, + unsigned long address, + pte_t *ptep, pte_t pte) +{ + *ptep = pte; + if (mm_has_pgste(mm)) + pgste_set_unlock(ptep, *(pgste_t *)(ptep + PTRS_PER_PTE)); +} #define __HAVE_ARCH_PTEP_CLEAR_FLUSH static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) { - pte_t pte = *ptep; - ptep_invalidate(vma->vm_mm, address, ptep); + pgste_t pgste; + pte_t pte; + + if (mm_has_pgste(vma->vm_mm)) + pgste = pgste_get_lock(ptep); + + pte = *ptep; + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; + + if (mm_has_pgste(vma->vm_mm)) { + pgste = pgste_update_all(&pte, pgste); + pgste_set_unlock(ptep, pgste); + } return pte; } @@ -953,76 +979,67 @@ static inline pte_t ptep_clear_flush(struct vm_area_struct *vma, */ #define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, - unsigned long addr, + unsigned long address, pte_t *ptep, int full) { - pte_t pte = *ptep; + pgste_t pgste; + pte_t pte; + + if (mm_has_pgste(mm)) + pgste = pgste_get_lock(ptep); + + pte = *ptep; + if (!full) + __ptep_ipte(address, ptep); + pte_val(*ptep) = _PAGE_TYPE_EMPTY; - if (full) - pte_clear(mm, addr, ptep); - else - ptep_invalidate(mm, addr, ptep); + if (mm_has_pgste(mm)) { + pgste = pgste_update_all(&pte, pgste); + pgste_set_unlock(ptep, pgste); + } return pte; } #define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define ptep_set_wrprotect(__mm, __addr, __ptep) \ -({ \ - pte_t __pte = *(__ptep); \ - if (pte_write(__pte)) { \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - ptep_invalidate(__mm, __addr, __ptep); \ - set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte)); \ - } \ -}) +static inline pte_t ptep_set_wrprotect(struct mm_struct *mm, + unsigned long address, pte_t *ptep) +{ + pgste_t pgste; + pte_t pte = *ptep; -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - ptep_invalidate((__vma)->vm_mm, __addr, __ptep); \ - set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry); \ - } \ - __changed; \ -}) + if (pte_write(pte)) { + mm->context.flush_mm = 1; + if (mm_has_pgste(mm)) + pgste = pgste_get_lock(ptep); -/* - * Test and clear dirty bit in storage key. - * We can't clear the changed bit atomically. This is a potential - * race against modification of the referenced bit. This function - * should therefore only be called if it is not mapped in any - * address space. - */ -#define __HAVE_ARCH_PAGE_TEST_DIRTY -static inline int page_test_dirty(struct page *page) -{ - return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0; -} + if (!mm_exclusive(mm)) + __ptep_ipte(address, ptep); + *ptep = pte_wrprotect(pte); -#define __HAVE_ARCH_PAGE_CLEAR_DIRTY -static inline void page_clear_dirty(struct page *page, int mapped) -{ - page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY, mapped); + if (mm_has_pgste(mm)) + pgste_set_unlock(ptep, pgste); + } + return pte; } -/* - * Test and clear referenced bit in storage key. - */ -#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG -static inline int page_test_and_clear_young(struct page *page) +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +static inline int ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long address, pte_t *ptep, + pte_t entry, int dirty) { - unsigned long physpage = page_to_phys(page); - int ccode; - - asm volatile( - " rrbe 0,%1\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (ccode) : "a" (physpage) : "cc" ); - return ccode & 2; + pgste_t pgste; + + if (pte_same(*ptep, entry)) + return 0; + if (mm_has_pgste(vma->vm_mm)) + pgste = pgste_get_lock(ptep); + + __ptep_ipte(address, ptep); + *ptep = entry; + + if (mm_has_pgste(vma->vm_mm)) + pgste_set_unlock(ptep, pgste); + return 1; } /* diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index 2c79b6416271..1300c3025334 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -84,6 +84,7 @@ struct thread_struct { struct per_event per_event; /* Cause of the last PER trap */ /* pfault_wait is used to block the process on a pfault event */ unsigned long pfault_wait; + struct list_head list; }; typedef struct thread_struct thread_struct; diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h index 9074a54c4d10..77eee5477a52 100644 --- a/arch/s390/include/asm/tlb.h +++ b/arch/s390/include/asm/tlb.h @@ -29,65 +29,77 @@ #include <asm/smp.h> #include <asm/tlbflush.h> -#ifndef CONFIG_SMP -#define TLB_NR_PTRS 1 -#else -#define TLB_NR_PTRS 508 -#endif - struct mmu_gather { struct mm_struct *mm; unsigned int fullmm; unsigned int nr_ptes; unsigned int nr_pxds; - void *array[TLB_NR_PTRS]; + unsigned int max; + void **array; + void *local[8]; }; -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - -static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, - unsigned int full_mm_flush) +static inline void __tlb_alloc_page(struct mmu_gather *tlb) { - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); + unsigned long addr = __get_free_pages(GFP_NOWAIT | __GFP_NOWARN, 0); + if (addr) { + tlb->array = (void *) addr; + tlb->max = PAGE_SIZE / sizeof(void *); + } +} + +static inline void tlb_gather_mmu(struct mmu_gather *tlb, + struct mm_struct *mm, + unsigned int full_mm_flush) +{ tlb->mm = mm; + tlb->max = ARRAY_SIZE(tlb->local); + tlb->array = tlb->local; tlb->fullmm = full_mm_flush; - tlb->nr_ptes = 0; - tlb->nr_pxds = TLB_NR_PTRS; if (tlb->fullmm) __tlb_flush_mm(mm); - return tlb; + else + __tlb_alloc_page(tlb); + tlb->nr_ptes = 0; + tlb->nr_pxds = tlb->max; } -static inline void tlb_flush_mmu(struct mmu_gather *tlb, - unsigned long start, unsigned long end) +static inline void tlb_flush_mmu(struct mmu_gather *tlb) { - if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < TLB_NR_PTRS)) + if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < tlb->max)) __tlb_flush_mm(tlb->mm); while (tlb->nr_ptes > 0) page_table_free_rcu(tlb->mm, tlb->array[--tlb->nr_ptes]); - while (tlb->nr_pxds < TLB_NR_PTRS) + while (tlb->nr_pxds < tlb->max) crst_table_free_rcu(tlb->mm, tlb->array[tlb->nr_pxds++]); } static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - tlb_flush_mmu(tlb, start, end); + tlb_flush_mmu(tlb); rcu_table_freelist_finish(); /* keep the page table cache within bounds */ check_pgt_cache(); - put_cpu_var(mmu_gathers); + if (tlb->array != tlb->local) + free_pages((unsigned long) tlb->array, 0); } /* * Release the page cache reference for a pte removed by - * tlb_ptep_clear_flush. In both flush modes the tlb fo a page cache page + * tlb_ptep_clear_flush. In both flush modes the tlb for a page cache page * has already been freed, so just do free_page_and_swap_cache. */ +static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + free_page_and_swap_cache(page); + return 1; /* avoid calling tlb_flush_mmu */ +} + static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) { free_page_and_swap_cache(page); @@ -103,7 +115,7 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, if (!tlb->fullmm) { tlb->array[tlb->nr_ptes++] = pte; if (tlb->nr_ptes >= tlb->nr_pxds) - tlb_flush_mmu(tlb, 0, 0); + tlb_flush_mmu(tlb); } else page_table_free(tlb->mm, (unsigned long *) pte); } @@ -124,7 +136,7 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd, if (!tlb->fullmm) { tlb->array[--tlb->nr_pxds] = pmd; if (tlb->nr_ptes >= tlb->nr_pxds) - tlb_flush_mmu(tlb, 0, 0); + tlb_flush_mmu(tlb); } else crst_table_free(tlb->mm, (unsigned long *) pmd); #endif @@ -146,7 +158,7 @@ static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud, if (!tlb->fullmm) { tlb->array[--tlb->nr_pxds] = pud; if (tlb->nr_ptes >= tlb->nr_pxds) - tlb_flush_mmu(tlb, 0, 0); + tlb_flush_mmu(tlb); } else crst_table_free(tlb->mm, (unsigned long *) pud); #endif diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 29d5d6d4becc..b7a4f2eb0057 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -50,7 +50,7 @@ static inline void __tlb_flush_full(struct mm_struct *mm) /* * If the process only ran on the local cpu, do a local flush. */ - local_cpumask = cpumask_of_cpu(smp_processor_id()); + cpumask_copy(&local_cpumask, cpumask_of(smp_processor_id())); if (cpumask_equal(mm_cpumask(mm), &local_cpumask)) __tlb_flush_local(); else @@ -80,16 +80,11 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) * on all cpus instead of doing a local flush if the mm * only ran on the local cpu. */ - if (MACHINE_HAS_IDTE) { - if (mm->context.noexec) - __tlb_flush_idte((unsigned long) - get_shadow_table(mm->pgd) | - mm->context.asce_bits); + if (MACHINE_HAS_IDTE) __tlb_flush_idte((unsigned long) mm->pgd | mm->context.asce_bits); - return; - } - __tlb_flush_full(mm); + else + __tlb_flush_full(mm); } static inline void __tlb_flush_mm_cond(struct mm_struct * mm) diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index e82152572377..9208e69245a0 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -385,6 +385,7 @@ /* Ignore system calls that are also reachable via sys_socket */ #define __IGNORE_recvmmsg +#define __IGNORE_sendmmsg #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index fe03c140002a..edfbd17d7082 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -124,13 +124,11 @@ int main(void) DEFINE(__LC_LAST_UPDATE_TIMER, offsetof(struct _lowcore, last_update_timer)); DEFINE(__LC_LAST_UPDATE_CLOCK, offsetof(struct _lowcore, last_update_clock)); DEFINE(__LC_CURRENT, offsetof(struct _lowcore, current_task)); + DEFINE(__LC_CURRENT_PID, offsetof(struct _lowcore, current_pid)); DEFINE(__LC_THREAD_INFO, offsetof(struct _lowcore, thread_info)); DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack)); DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack)); DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack)); - DEFINE(__LC_KERNEL_ASCE, offsetof(struct _lowcore, kernel_asce)); - DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); - DEFINE(__LC_USER_EXEC_ASCE, offsetof(struct _lowcore, user_exec_asce)); DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 1b67fc6ebdc2..0476174dfff5 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -212,6 +212,7 @@ __switch_to: lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 lm %r6,%r15,__SF_GPRS(%r15) # load gprs of next task st %r3,__LC_CURRENT # store task struct of next + mvc __LC_CURRENT_PID(4,%r0),__TASK_pid(%r3) # store pid of next st %r5,__LC_THREAD_INFO # store thread info of next ahi %r5,STACK_SIZE # end of kernel stack of next st %r5,__LC_KERNEL_STACK # store end of kernel stack diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 9fd864563499..d61967e2eab0 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -220,6 +220,7 @@ __switch_to: lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task stg %r3,__LC_CURRENT # store task struct of next + mvc __LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next stg %r5,__LC_THREAD_INFO # store thread info of next aghi %r5,STACK_SIZE # end of kernel stack of next stg %r5,__LC_KERNEL_STACK # store end of kernel stack diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index ea5099c9709c..e204f9597aaf 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -32,6 +32,7 @@ static const struct irq_class intrclass_names[] = { {.name = "VRT", .desc = "[EXT] Virtio" }, {.name = "SCP", .desc = "[EXT] Service Call" }, {.name = "IUC", .desc = "[EXT] IUCV" }, + {.name = "CPM", .desc = "[EXT] CPU Measurement" }, {.name = "QAI", .desc = "[I/O] QDIO Adapter Interrupt" }, {.name = "QDI", .desc = "[I/O] QDIO Interrupt" }, {.name = "DAS", .desc = "[I/O] DASD" }, diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index a895e69379f7..541a7509faeb 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -9,41 +9,26 @@ #include <linux/compiler.h> #include <linux/cpu.h> -#include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> #include <linux/mm.h> -#include <linux/fs.h> #include <linux/smp.h> -#include <linux/stddef.h> #include <linux/slab.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/vmalloc.h> -#include <linux/user.h> #include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/reboot.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/notifier.h> #include <linux/tick.h> -#include <linux/elfcore.h> -#include <linux/kernel_stat.h> #include <linux/personality.h> #include <linux/syscalls.h> #include <linux/compat.h> #include <linux/kprobes.h> #include <linux/random.h> -#include <asm/compat.h> -#include <asm/uaccess.h> -#include <asm/pgtable.h> +#include <linux/module.h> #include <asm/system.h> #include <asm/io.h> #include <asm/processor.h> #include <asm/irq.h> #include <asm/timer.h> #include <asm/nmi.h> +#include <asm/compat.h> #include <asm/smp.h> #include "entry.h" diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f5434d1ecb31..0c35dee10b00 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -305,8 +305,7 @@ static int set_amode_and_uaccess(unsigned long user_amode, */ static int __init early_parse_switch_amode(char *p) { - if (user_mode != SECONDARY_SPACE_MODE) - user_mode = PRIMARY_SPACE_MODE; + user_mode = PRIMARY_SPACE_MODE; return 0; } early_param("switch_amode", early_parse_switch_amode); @@ -315,10 +314,6 @@ static int __init early_parse_user_mode(char *p) { if (p && strcmp(p, "primary") == 0) user_mode = PRIMARY_SPACE_MODE; -#ifdef CONFIG_S390_EXEC_PROTECT - else if (p && strcmp(p, "secondary") == 0) - user_mode = SECONDARY_SPACE_MODE; -#endif else if (!p || strcmp(p, "home") == 0) user_mode = HOME_SPACE_MODE; else @@ -327,31 +322,9 @@ static int __init early_parse_user_mode(char *p) } early_param("user_mode", early_parse_user_mode); -#ifdef CONFIG_S390_EXEC_PROTECT -/* - * Enable execute protection? - */ -static int __init early_parse_noexec(char *p) -{ - if (!strncmp(p, "off", 3)) - return 0; - user_mode = SECONDARY_SPACE_MODE; - return 0; -} -early_param("noexec", early_parse_noexec); -#endif /* CONFIG_S390_EXEC_PROTECT */ - static void setup_addressing_mode(void) { - if (user_mode == SECONDARY_SPACE_MODE) { - if (set_amode_and_uaccess(PSW_ASC_SECONDARY, - PSW32_ASC_SECONDARY)) - pr_info("Execute protection active, " - "mvcos available\n"); - else - pr_info("Execute protection active, " - "mvcos not available\n"); - } else if (user_mode == PRIMARY_SPACE_MODE) { + if (user_mode == PRIMARY_SPACE_MODE) { if (set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY)) pr_info("Address spaces switched, " "mvcos available\n"); diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 63c7d9ff220d..f8e85ecbc459 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -335,7 +335,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail) smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN; if (!cpu_stopped(logical_cpu)) continue; - cpu_set(logical_cpu, cpu_present_map); + set_cpu_present(logical_cpu, true); smp_cpu_state[logical_cpu] = CPU_STATE_CONFIGURED; logical_cpu = cpumask_next(logical_cpu, &avail); if (logical_cpu >= nr_cpu_ids) @@ -367,7 +367,7 @@ static int smp_rescan_cpus_sclp(cpumask_t avail) continue; __cpu_logical_map[logical_cpu] = cpu_id; smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN; - cpu_set(logical_cpu, cpu_present_map); + set_cpu_present(logical_cpu, true); if (cpu >= info->configured) smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY; else @@ -385,7 +385,7 @@ static int __smp_rescan_cpus(void) { cpumask_t avail; - cpus_xor(avail, cpu_possible_map, cpu_present_map); + cpumask_xor(&avail, cpu_possible_mask, cpu_present_mask); if (smp_use_sigp_detection) return smp_rescan_cpus_sigp(avail); else @@ -467,7 +467,7 @@ int __cpuinit start_secondary(void *cpuvoid) notify_cpu_starting(smp_processor_id()); /* Mark this cpu as online */ ipi_call_lock(); - cpu_set(smp_processor_id(), cpu_online_map); + set_cpu_online(smp_processor_id(), true); ipi_call_unlock(); /* Switch on interrupts */ local_irq_enable(); @@ -644,7 +644,7 @@ int __cpu_disable(void) struct ec_creg_mask_parms cr_parms; int cpu = smp_processor_id(); - cpu_clear(cpu, cpu_online_map); + set_cpu_online(cpu, false); /* Disable pfault pseudo page faults on this cpu. */ pfault_fini(); @@ -654,8 +654,8 @@ int __cpu_disable(void) /* disable all external interrupts */ cr_parms.orvals[0] = 0; - cr_parms.andvals[0] = ~(1 << 15 | 1 << 14 | 1 << 13 | 1 << 12 | - 1 << 11 | 1 << 10 | 1 << 6 | 1 << 4); + cr_parms.andvals[0] = ~(1 << 15 | 1 << 14 | 1 << 13 | 1 << 11 | + 1 << 10 | 1 << 9 | 1 << 6 | 1 << 4); /* disable all I/O interrupts */ cr_parms.orvals[6] = 0; cr_parms.andvals[6] = ~(1 << 31 | 1 << 30 | 1 << 29 | 1 << 28 | @@ -681,7 +681,7 @@ void __cpu_die(unsigned int cpu) atomic_dec(&init_mm.context.attach_count); } -void cpu_die(void) +void __noreturn cpu_die(void) { idle_task_exit(); while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) @@ -738,8 +738,8 @@ void __init smp_prepare_boot_cpu(void) BUG_ON(smp_processor_id() != 0); current_thread_info()->cpu = 0; - cpu_set(0, cpu_present_map); - cpu_set(0, cpu_online_map); + set_cpu_present(0, true); + set_cpu_online(0, true); S390_lowcore.percpu_offset = __per_cpu_offset[0]; current_set[0] = current; smp_cpu_state[0] = CPU_STATE_CONFIGURED; @@ -1016,21 +1016,21 @@ int __ref smp_rescan_cpus(void) get_online_cpus(); mutex_lock(&smp_cpu_state_mutex); - newcpus = cpu_present_map; + cpumask_copy(&newcpus, cpu_present_mask); rc = __smp_rescan_cpus(); if (rc) goto out; - cpus_andnot(newcpus, cpu_present_map, newcpus); - for_each_cpu_mask(cpu, newcpus) { + cpumask_andnot(&newcpus, cpu_present_mask, &newcpus); + for_each_cpu(cpu, &newcpus) { rc = smp_add_present_cpu(cpu); if (rc) - cpu_clear(cpu, cpu_present_map); + set_cpu_present(cpu, false); } rc = 0; out: mutex_unlock(&smp_cpu_state_mutex); put_online_cpus(); - if (!cpus_empty(newcpus)) + if (!cpumask_empty(&newcpus)) topology_schedule_update(); return rc; } diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 87be655557aa..a59557f1fb5f 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -810,7 +810,7 @@ static int etr_sync_clock_stop(struct etr_aib *aib, int port) etr_sync.etr_port = port; get_online_cpus(); atomic_set(&etr_sync.cpus, num_online_cpus() - 1); - rc = stop_machine(etr_sync_clock, &etr_sync, &cpu_online_map); + rc = stop_machine(etr_sync_clock, &etr_sync, cpu_online_mask); put_online_cpus(); return rc; } @@ -1579,7 +1579,7 @@ static void stp_work_fn(struct work_struct *work) memset(&stp_sync, 0, sizeof(stp_sync)); get_online_cpus(); atomic_set(&stp_sync.cpus, num_online_cpus() - 1); - stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map); + stop_machine(stp_sync_clock, &stp_sync, cpu_online_mask); put_online_cpus(); if (!check_sync_clock()) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 94b06c31fc8a..2eafb8c7a746 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -52,20 +52,20 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) { cpumask_t mask; - cpus_clear(mask); + cpumask_clear(&mask); if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) { cpumask_copy(&mask, cpumask_of(cpu)); return mask; } while (info) { - if (cpu_isset(cpu, info->mask)) { + if (cpumask_test_cpu(cpu, &info->mask)) { mask = info->mask; break; } info = info->next; } - if (cpus_empty(mask)) - mask = cpumask_of_cpu(cpu); + if (cpumask_empty(&mask)) + cpumask_copy(&mask, cpumask_of(cpu)); return mask; } @@ -85,10 +85,10 @@ static void add_cpus_to_mask(struct topology_cpu *tl_cpu, if (cpu_logical_map(lcpu) != rcpu) continue; #ifdef CONFIG_SCHED_BOOK - cpu_set(lcpu, book->mask); + cpumask_set_cpu(lcpu, &book->mask); cpu_book_id[lcpu] = book->id; #endif - cpu_set(lcpu, core->mask); + cpumask_set_cpu(lcpu, &core->mask); cpu_core_id[lcpu] = core->id; smp_cpu_polarization[lcpu] = tl_cpu->pp; } @@ -101,13 +101,13 @@ static void clear_masks(void) info = &core_info; while (info) { - cpus_clear(info->mask); + cpumask_clear(&info->mask); info = info->next; } #ifdef CONFIG_SCHED_BOOK info = &book_info; while (info) { - cpus_clear(info->mask); + cpumask_clear(&info->mask); info = info->next; } #endif diff --git a/arch/s390/kernel/vdso32/Makefile b/arch/s390/kernel/vdso32/Makefile index d13e8755a8cc..8ad2b34ad151 100644 --- a/arch/s390/kernel/vdso32/Makefile +++ b/arch/s390/kernel/vdso32/Makefile @@ -22,6 +22,9 @@ obj-y += vdso32_wrapper.o extra-y += vdso32.lds CPPFLAGS_vdso32.lds += -P -C -U$(ARCH) +# Disable gcov profiling for VDSO code +GCOV_PROFILE := n + # Force dependency (incbin is bad) $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so diff --git a/arch/s390/kernel/vdso64/Makefile b/arch/s390/kernel/vdso64/Makefile index 449352dda9cd..2a8ddfd12a5b 100644 --- a/arch/s390/kernel/vdso64/Makefile +++ b/arch/s390/kernel/vdso64/Makefile @@ -22,6 +22,9 @@ obj-y += vdso64_wrapper.o extra-y += vdso64.lds CPPFLAGS_vdso64.lds += -P -C -U$(ARCH) +# Disable gcov profiling for VDSO code +GCOV_PROFILE := n + # Force dependency (incbin is bad) $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 1bc18cdb525b..56fe6bc81fee 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -77,7 +77,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); INIT_DATA_SECTION(0x100) - PERCPU(0x100, PAGE_SIZE) + PERCPU_SECTION(0x100) . = ALIGN(PAGE_SIZE); __init_end = .; /* freed after init ends here */ diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 3cc95dd0a3a6..075ddada4911 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -412,6 +412,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long struct dcss_segment *seg; int rc, diag_cc; + start_addr = end_addr = 0; seg = kmalloc(sizeof(*seg), GFP_KERNEL | GFP_DMA); if (seg == NULL) { rc = -ENOMEM; @@ -573,6 +574,7 @@ segment_modify_shared (char *name, int do_nonshared) unsigned long start_addr, end_addr, dummy; int rc, diag_cc; + start_addr = end_addr = 0; mutex_lock(&dcss_lock); seg = segment_by_name (name); if (seg == NULL) { @@ -681,8 +683,6 @@ void segment_save(char *name) { struct dcss_segment *seg; - int startpfn = 0; - int endpfn = 0; char cmd1[160]; char cmd2[80]; int i, response; @@ -698,8 +698,6 @@ segment_save(char *name) goto out; } - startpfn = seg->start_addr >> PAGE_SHIFT; - endpfn = (seg->end) >> PAGE_SHIFT; sprintf(cmd1, "DEFSEG %s", name); for (i=0; i<seg->segcnt; i++) { sprintf(cmd1+strlen(cmd1), " %lX-%lX %s", diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index ab988135e5c6..a0f9e730f26a 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -225,33 +225,6 @@ static noinline void do_sigbus(struct pt_regs *regs, long int_code, force_sig_info(SIGBUS, &si, tsk); } -#ifdef CONFIG_S390_EXEC_PROTECT -static noinline int signal_return(struct pt_regs *regs, long int_code, - unsigned long trans_exc_code) -{ - u16 instruction; - int rc; - - rc = __get_user(instruction, (u16 __user *) regs->psw.addr); - - if (!rc && instruction == 0x0a77) { - clear_tsk_thread_flag(current, TIF_PER_TRAP); - if (is_compat_task()) - sys32_sigreturn(); - else - sys_sigreturn(); - } else if (!rc && instruction == 0x0aad) { - clear_tsk_thread_flag(current, TIF_PER_TRAP); - if (is_compat_task()) - sys32_rt_sigreturn(); - else - sys_rt_sigreturn(); - } else - do_sigsegv(regs, int_code, SEGV_MAPERR, trans_exc_code); - return 0; -} -#endif /* CONFIG_S390_EXEC_PROTECT */ - static noinline void do_fault_error(struct pt_regs *regs, long int_code, unsigned long trans_exc_code, int fault) { @@ -259,13 +232,6 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, switch (fault) { case VM_FAULT_BADACCESS: -#ifdef CONFIG_S390_EXEC_PROTECT - if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY && - (trans_exc_code & 3) == 0) { - signal_return(regs, int_code, trans_exc_code); - break; - } -#endif /* CONFIG_S390_EXEC_PROTECT */ case VM_FAULT_BADMAP: /* Bad memory access. Check if it is kernel or user space. */ if (regs->psw.mask & PSW_MASK_PSTATE) { @@ -414,11 +380,6 @@ void __kprobes do_dat_exception(struct pt_regs *regs, long pgm_int_code, int access, fault; access = VM_READ | VM_EXEC | VM_WRITE; -#ifdef CONFIG_S390_EXEC_PROTECT - if ((regs->psw.mask & PSW_MASK_ASC) == PSW_ASC_SECONDARY && - (trans_exc_code & 3) == 0) - access = VM_EXEC; -#endif fault = do_exception(regs, access, trans_exc_code); if (unlikely(fault)) do_fault_error(regs, pgm_int_code & 255, trans_exc_code, fault); @@ -491,22 +452,28 @@ static int __init nopfault(char *str) __setup("nopfault", nopfault); -typedef struct { - __u16 refdiagc; - __u16 reffcode; - __u16 refdwlen; - __u16 refversn; - __u64 refgaddr; - __u64 refselmk; - __u64 refcmpmk; - __u64 reserved; -} __attribute__ ((packed, aligned(8))) pfault_refbk_t; +struct pfault_refbk { + u16 refdiagc; + u16 reffcode; + u16 refdwlen; + u16 refversn; + u64 refgaddr; + u64 refselmk; + u64 refcmpmk; + u64 reserved; +} __attribute__ ((packed, aligned(8))); int pfault_init(void) { - pfault_refbk_t refbk = - { 0x258, 0, 5, 2, __LC_CURRENT, 1ULL << 48, 1ULL << 48, - __PF_RES_FIELD }; + struct pfault_refbk refbk = { + .refdiagc = 0x258, + .reffcode = 0, + .refdwlen = 5, + .refversn = 2, + .refgaddr = __LC_CURRENT_PID, + .refselmk = 1ULL << 48, + .refcmpmk = 1ULL << 48, + .reserved = __PF_RES_FIELD }; int rc; if (!MACHINE_IS_VM || pfault_disable) @@ -524,8 +491,12 @@ int pfault_init(void) void pfault_fini(void) { - pfault_refbk_t refbk = - { 0x258, 1, 5, 2, 0ULL, 0ULL, 0ULL, 0ULL }; + struct pfault_refbk refbk = { + .refdiagc = 0x258, + .reffcode = 1, + .refdwlen = 5, + .refversn = 2, + }; if (!MACHINE_IS_VM || pfault_disable) return; @@ -537,11 +508,15 @@ void pfault_fini(void) : : "a" (&refbk), "m" (refbk) : "cc"); } +static DEFINE_SPINLOCK(pfault_lock); +static LIST_HEAD(pfault_list); + static void pfault_interrupt(unsigned int ext_int_code, unsigned int param32, unsigned long param64) { struct task_struct *tsk; __u16 subcode; + pid_t pid; /* * Get the external interruption subcode & pfault @@ -553,44 +528,79 @@ static void pfault_interrupt(unsigned int ext_int_code, if ((subcode & 0xff00) != __SUBCODE_MASK) return; kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++; - - /* - * Get the token (= address of the task structure of the affected task). - */ -#ifdef CONFIG_64BIT - tsk = (struct task_struct *) param64; -#else - tsk = (struct task_struct *) param32; -#endif - + if (subcode & 0x0080) { + /* Get the token (= pid of the affected task). */ + pid = sizeof(void *) == 4 ? param32 : param64; + rcu_read_lock(); + tsk = find_task_by_pid_ns(pid, &init_pid_ns); + if (tsk) + get_task_struct(tsk); + rcu_read_unlock(); + if (!tsk) + return; + } else { + tsk = current; + } + spin_lock(&pfault_lock); if (subcode & 0x0080) { /* signal bit is set -> a page has been swapped in by VM */ - if (xchg(&tsk->thread.pfault_wait, -1) != 0) { + if (tsk->thread.pfault_wait == 1) { /* Initial interrupt was faster than the completion * interrupt. pfault_wait is valid. Set pfault_wait * back to zero and wake up the process. This can * safely be done because the task is still sleeping * and can't produce new pfaults. */ tsk->thread.pfault_wait = 0; + list_del(&tsk->thread.list); wake_up_process(tsk); - put_task_struct(tsk); + } else { + /* Completion interrupt was faster than initial + * interrupt. Set pfault_wait to -1 so the initial + * interrupt doesn't put the task to sleep. */ + tsk->thread.pfault_wait = -1; } + put_task_struct(tsk); } else { /* signal bit not set -> a real page is missing. */ - get_task_struct(tsk); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - if (xchg(&tsk->thread.pfault_wait, 1) != 0) { + if (tsk->thread.pfault_wait == -1) { /* Completion interrupt was faster than the initial - * interrupt (swapped in a -1 for pfault_wait). Set - * pfault_wait back to zero and exit. This can be - * done safely because tsk is running in kernel - * mode and can't produce new pfaults. */ + * interrupt (pfault_wait == -1). Set pfault_wait + * back to zero and exit. */ tsk->thread.pfault_wait = 0; - set_task_state(tsk, TASK_RUNNING); - put_task_struct(tsk); - } else + } else { + /* Initial interrupt arrived before completion + * interrupt. Let the task sleep. */ + tsk->thread.pfault_wait = 1; + list_add(&tsk->thread.list, &pfault_list); + set_task_state(tsk, TASK_UNINTERRUPTIBLE); set_tsk_need_resched(tsk); + } + } + spin_unlock(&pfault_lock); +} + +static int __cpuinit pfault_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + struct thread_struct *thread, *next; + struct task_struct *tsk; + + switch (action) { + case CPU_DEAD: + case CPU_DEAD_FROZEN: + spin_lock_irq(&pfault_lock); + list_for_each_entry_safe(thread, next, &pfault_list, list) { + thread->pfault_wait = 0; + list_del(&thread->list); + tsk = container_of(thread, struct task_struct, thread); + wake_up_process(tsk); + } + spin_unlock_irq(&pfault_lock); + break; + default: + break; } + return NOTIFY_OK; } static int __init pfault_irq_init(void) @@ -599,22 +609,21 @@ static int __init pfault_irq_init(void) if (!MACHINE_IS_VM) return 0; - /* - * Try to get pfault pseudo page faults going. - */ rc = register_external_interrupt(0x2603, pfault_interrupt); - if (rc) { - pfault_disable = 1; - return rc; - } - if (pfault_init() == 0) - return 0; + if (rc) + goto out_extint; + rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP; + if (rc) + goto out_pfault; + hotcpu_notifier(pfault_cpu_notify, 0); + return 0; - /* Tough luck, no pfault. */ - pfault_disable = 1; +out_pfault: unregister_external_interrupt(0x2603, pfault_interrupt); - return 0; +out_extint: + pfault_disable = 1; + return rc; } early_initcall(pfault_irq_init); -#endif +#endif /* CONFIG_PFAULT */ diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c index 639cd21f2218..a4d856db9154 100644 --- a/arch/s390/mm/hugetlbpage.c +++ b/arch/s390/mm/hugetlbpage.c @@ -13,7 +13,6 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *pteptr, pte_t pteval) { pmd_t *pmdp = (pmd_t *) pteptr; - pte_t shadow_pteval = pteval; unsigned long mask; if (!MACHINE_HAS_HPAGE) { @@ -21,18 +20,9 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, mask = pte_val(pteval) & (_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO); pte_val(pteval) = (_SEGMENT_ENTRY + __pa(pteptr)) | mask; - if (mm->context.noexec) { - pteptr += PTRS_PER_PTE; - pte_val(shadow_pteval) = - (_SEGMENT_ENTRY + __pa(pteptr)) | mask; - } } pmd_val(*pmdp) = pte_val(pteval); - if (mm->context.noexec) { - pmdp = get_shadow_table(pmdp); - pmd_val(*pmdp) = pte_val(shadow_pteval); - } } int arch_prepare_hugepage(struct page *page) diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index bb409332a484..dfefc2171691 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -175,7 +175,8 @@ void kernel_map_pages(struct page *page, int numpages, int enable) pmd = pmd_offset(pud, address); pte = pte_offset_kernel(pmd, address); if (!enable) { - ptep_invalidate(&init_mm, address, pte); + __ptep_ipte(address, pte); + pte_val(*pte) = _PAGE_TYPE_EMPTY; continue; } *pte = mk_pte_phys(address, __pgprot(_PAGE_TYPE_RW)); diff --git a/arch/s390/mm/pageattr.c b/arch/s390/mm/pageattr.c index f05edcc3beff..d013ed39743b 100644 --- a/arch/s390/mm/pageattr.c +++ b/arch/s390/mm/pageattr.c @@ -28,7 +28,7 @@ static void change_page_attr(unsigned long addr, int numpages, pte = *ptep; pte = set(pte); - ptep_invalidate(&init_mm, addr, ptep); + __ptep_ipte(addr, ptep); *ptep = pte; addr += PAGE_SIZE; } diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index e1850c28cd68..14c6fae6fe6b 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -36,11 +36,9 @@ struct rcu_table_freelist { ((PAGE_SIZE - sizeof(struct rcu_table_freelist)) \ / sizeof(unsigned long)) -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); static DEFINE_PER_CPU(struct rcu_table_freelist *, rcu_table_freelist); static void __page_table_free(struct mm_struct *mm, unsigned long *table); -static void __crst_table_free(struct mm_struct *mm, unsigned long *table); static struct rcu_table_freelist *rcu_table_freelist_get(struct mm_struct *mm) { @@ -67,7 +65,7 @@ static void rcu_table_freelist_callback(struct rcu_head *head) while (batch->pgt_index > 0) __page_table_free(batch->mm, batch->table[--batch->pgt_index]); while (batch->crst_index < RCU_FREELIST_SIZE) - __crst_table_free(batch->mm, batch->table[batch->crst_index++]); + crst_table_free(batch->mm, batch->table[batch->crst_index++]); free_page((unsigned long) batch); } @@ -125,63 +123,33 @@ static int __init parse_vmalloc(char *arg) } early_param("vmalloc", parse_vmalloc); -unsigned long *crst_table_alloc(struct mm_struct *mm, int noexec) +unsigned long *crst_table_alloc(struct mm_struct *mm) { struct page *page = alloc_pages(GFP_KERNEL, ALLOC_ORDER); if (!page) return NULL; - page->index = 0; - if (noexec) { - struct page *shadow = alloc_pages(GFP_KERNEL, ALLOC_ORDER); - if (!shadow) { - __free_pages(page, ALLOC_ORDER); - return NULL; - } - page->index = page_to_phys(shadow); - } - spin_lock_bh(&mm->context.list_lock); - list_add(&page->lru, &mm->context.crst_list); - spin_unlock_bh(&mm->context.list_lock); return (unsigned long *) page_to_phys(page); } -static void __crst_table_free(struct mm_struct *mm, unsigned long *table) -{ - unsigned long *shadow = get_shadow_table(table); - - if (shadow) - free_pages((unsigned long) shadow, ALLOC_ORDER); - free_pages((unsigned long) table, ALLOC_ORDER); -} - void crst_table_free(struct mm_struct *mm, unsigned long *table) { - struct page *page = virt_to_page(table); - - spin_lock_bh(&mm->context.list_lock); - list_del(&page->lru); - spin_unlock_bh(&mm->context.list_lock); - __crst_table_free(mm, table); + free_pages((unsigned long) table, ALLOC_ORDER); } void crst_table_free_rcu(struct mm_struct *mm, unsigned long *table) { struct rcu_table_freelist *batch; - struct page *page = virt_to_page(table); - spin_lock_bh(&mm->context.list_lock); - list_del(&page->lru); - spin_unlock_bh(&mm->context.list_lock); if (atomic_read(&mm->mm_users) < 2 && cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) { - __crst_table_free(mm, table); + crst_table_free(mm, table); return; } batch = rcu_table_freelist_get(mm); if (!batch) { smp_call_function(smp_sync, NULL, 1); - __crst_table_free(mm, table); + crst_table_free(mm, table); return; } batch->table[--batch->crst_index] = table; @@ -197,7 +165,7 @@ int crst_table_upgrade(struct mm_struct *mm, unsigned long limit) BUG_ON(limit > (1UL << 53)); repeat: - table = crst_table_alloc(mm, mm->context.noexec); + table = crst_table_alloc(mm); if (!table) return -ENOMEM; spin_lock_bh(&mm->page_table_lock); @@ -273,7 +241,7 @@ unsigned long *page_table_alloc(struct mm_struct *mm) unsigned long *table; unsigned long bits; - bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; + bits = (mm->context.has_pgste) ? 3UL : 1UL; spin_lock_bh(&mm->context.list_lock); page = NULL; if (!list_empty(&mm->context.pgtable_list)) { @@ -329,7 +297,7 @@ void page_table_free(struct mm_struct *mm, unsigned long *table) struct page *page; unsigned long bits; - bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; + bits = (mm->context.has_pgste) ? 3UL : 1UL; bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long); page = pfn_to_page(__pa(table) >> PAGE_SHIFT); spin_lock_bh(&mm->context.list_lock); @@ -366,7 +334,7 @@ void page_table_free_rcu(struct mm_struct *mm, unsigned long *table) page_table_free(mm, table); return; } - bits = (mm->context.noexec || mm->context.has_pgste) ? 3UL : 1UL; + bits = (mm->context.has_pgste) ? 3UL : 1UL; bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long); page = pfn_to_page(__pa(table) >> PAGE_SHIFT); spin_lock_bh(&mm->context.list_lock); @@ -379,25 +347,6 @@ void page_table_free_rcu(struct mm_struct *mm, unsigned long *table) rcu_table_freelist_finish(); } -void disable_noexec(struct mm_struct *mm, struct task_struct *tsk) -{ - struct page *page; - - spin_lock_bh(&mm->context.list_lock); - /* Free shadow region and segment tables. */ - list_for_each_entry(page, &mm->context.crst_list, lru) - if (page->index) { - free_pages((unsigned long) page->index, ALLOC_ORDER); - page->index = 0; - } - /* "Free" second halves of page tables. */ - list_for_each_entry(page, &mm->context.pgtable_list, lru) - page->flags &= ~SECOND_HALVES; - spin_unlock_bh(&mm->context.list_lock); - mm->context.noexec = 0; - update_mm(mm, tsk); -} - /* * switch on pgstes for its userspace process (for kvm) */ diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index 34c43f23b28c..8c1970d1dd91 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -95,7 +95,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) pu_dir = vmem_pud_alloc(); if (!pu_dir) goto out; - pgd_populate_kernel(&init_mm, pg_dir, pu_dir); + pgd_populate(&init_mm, pg_dir, pu_dir); } pu_dir = pud_offset(pg_dir, address); @@ -103,7 +103,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) pm_dir = vmem_pmd_alloc(); if (!pm_dir) goto out; - pud_populate_kernel(&init_mm, pu_dir, pm_dir); + pud_populate(&init_mm, pu_dir, pm_dir); } pte = mk_pte_phys(address, __pgprot(ro ? _PAGE_RO : 0)); @@ -123,7 +123,7 @@ static int vmem_add_mem(unsigned long start, unsigned long size, int ro) pt_dir = vmem_pte_alloc(); if (!pt_dir) goto out; - pmd_populate_kernel(&init_mm, pm_dir, pt_dir); + pmd_populate(&init_mm, pm_dir, pt_dir); } pt_dir = pte_offset_kernel(pm_dir, address); @@ -159,7 +159,7 @@ static void vmem_remove_range(unsigned long start, unsigned long size) continue; if (pmd_huge(*pm_dir)) { - pmd_clear_kernel(pm_dir); + pmd_clear(pm_dir); address += HPAGE_SIZE - PAGE_SIZE; continue; } @@ -192,7 +192,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) pu_dir = vmem_pud_alloc(); if (!pu_dir) goto out; - pgd_populate_kernel(&init_mm, pg_dir, pu_dir); + pgd_populate(&init_mm, pg_dir, pu_dir); } pu_dir = pud_offset(pg_dir, address); @@ -200,7 +200,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) pm_dir = vmem_pmd_alloc(); if (!pm_dir) goto out; - pud_populate_kernel(&init_mm, pu_dir, pm_dir); + pud_populate(&init_mm, pu_dir, pm_dir); } pm_dir = pmd_offset(pu_dir, address); @@ -208,7 +208,7 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) pt_dir = vmem_pte_alloc(); if (!pt_dir) goto out; - pmd_populate_kernel(&init_mm, pm_dir, pt_dir); + pmd_populate(&init_mm, pm_dir, pt_dir); } pt_dir = pte_offset_kernel(pm_dir, address); diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 33cbd373cce4..053caa0fd276 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -5,6 +5,7 @@ * Author: Heinz Graalfs <graalfs@de.ibm.com> */ +#include <linux/kernel_stat.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/smp.h> @@ -674,17 +675,11 @@ int hwsampler_activate(unsigned int cpu) static void hws_ext_handler(unsigned int ext_int_code, unsigned int param32, unsigned long param64) { - int cpu; struct hws_cpu_buffer *cb; - cpu = smp_processor_id(); - cb = &per_cpu(sampler_cpu_buffer, cpu); - - atomic_xchg( - &cb->ext_params, - atomic_read(&cb->ext_params) - | S390_lowcore.ext_params); - + kstat_cpu(smp_processor_id()).irqs[EXTINT_CPM]++; + cb = &__get_cpu_var(sampler_cpu_buffer); + atomic_xchg(&cb->ext_params, atomic_read(&cb->ext_params) | param32); if (hws_wq) queue_work(hws_wq, &cb->worker); } @@ -764,7 +759,7 @@ static int worker_check_error(unsigned int cpu, int ext_params) if (!sdbt || !*sdbt) return -EINVAL; - if (ext_params & EI_IEA) + if (ext_params & EI_PRA) cb->req_alert++; if (ext_params & EI_LSDA) @@ -1009,7 +1004,7 @@ int hwsampler_deallocate() if (hws_state != HWS_STOPPED) goto deallocate_exit; - smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ + ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ deallocate_sdbt(); hws_state = HWS_DEALLOCATED; @@ -1123,7 +1118,7 @@ int hwsampler_shutdown() mutex_lock(&hws_sem); if (hws_state == HWS_STOPPED) { - smp_ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ + ctl_clear_bit(0, 5); /* set bit 58 CR0 off */ deallocate_sdbt(); } if (hws_wq) { @@ -1198,7 +1193,7 @@ start_all_exit: hws_oom = 1; hws_flush_all = 0; /* now let them in, 1407 CPUMF external interrupts */ - smp_ctl_set_bit(0, 5); /* set CR0 bit 58 */ + ctl_set_bit(0, 5); /* set CR0 bit 58 */ return 0; } diff --git a/arch/score/Kconfig.debug b/arch/score/Kconfig.debug index 451ed54ce646..a1f346df0a71 100644 --- a/arch/score/Kconfig.debug +++ b/arch/score/Kconfig.debug @@ -16,15 +16,6 @@ config CMDLINE other cases you can specify kernel args so that you don't have to set them up in board prom initialization routines. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config RUNTIME_DEBUG bool "Enable run-time debugging" depends on DEBUG_KERNEL diff --git a/arch/score/mm/init.c b/arch/score/mm/init.c index 50fdec54c70a..cee6bce1e30c 100644 --- a/arch/score/mm/init.c +++ b/arch/score/mm/init.c @@ -38,8 +38,6 @@ #include <asm/sections.h> #include <asm/tlb.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - unsigned long empty_zero_page; EXPORT_SYMBOL_GPL(empty_zero_page); diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 1553d56cf4e0..c1d5a820b1aa 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -28,15 +28,6 @@ config STACK_DEBUG every function call and will therefore incur a major performance hit. Most users should say N. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 75abb38dffd5..6c308d8b9a50 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -23,8 +23,6 @@ struct mmu_gather { unsigned long start, end; }; -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - static inline void init_tlb_gather(struct mmu_gather *tlb) { tlb->start = TASK_SIZE; @@ -36,17 +34,13 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } } -static inline struct mmu_gather * -tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +static inline void +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush) { - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - tlb->mm = mm; tlb->fullmm = full_mm_flush; init_tlb_gather(tlb); - - return tlb; } static inline void @@ -57,8 +51,6 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) /* keep the page table cache within bounds */ check_pgt_cache(); - - put_cpu_var(mmu_gathers); } static inline void @@ -91,7 +83,21 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) } } -#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) +static inline void tlb_flush_mmu(struct mmu_gather *tlb) +{ +} + +static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + free_page_and_swap_cache(page); + return 1; /* avoid calling tlb_flush_mmu */ +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + __tlb_remove_page(tlb, page); +} + #define pte_free_tlb(tlb, ptep, addr) pte_free((tlb)->mm, ptep) #define pmd_free_tlb(tlb, pmdp, addr) pmd_free((tlb)->mm, pmdp) #define pud_free_tlb(tlb, pudp, addr) pud_free((tlb)->mm, pudp) diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index af4d46187a79..731c10ce67b5 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -66,7 +66,7 @@ SECTIONS __machvec_end = .; } - PERCPU(L1_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L1_CACHE_BYTES) /* * .exit.text is discarded at runtime, not link time, to deal with diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 0d3f912e3334..58a93fb3d965 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -28,7 +28,6 @@ #include <asm/cache.h> #include <asm/sizes.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; void __init generic_mem_init(void) diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug index d9a795efbc04..6db35fba79fd 100644 --- a/arch/sparc/Kconfig.debug +++ b/arch/sparc/Kconfig.debug @@ -6,15 +6,6 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config DEBUG_DCFLUSH bool "D-cache flush debugging" depends on SPARC64 && DEBUG_KERNEL diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h index 5bdfa2c6e400..4e5e0878144f 100644 --- a/arch/sparc/include/asm/pgalloc_64.h +++ b/arch/sparc/include/asm/pgalloc_64.h @@ -78,4 +78,7 @@ static inline void check_pgt_cache(void) quicklist_trim(0, NULL, 25, 16); } +#define __pte_free_tlb(tlb, pte, addr) pte_free((tlb)->mm, pte) +#define __pmd_free_tlb(tlb, pmd, addr) pmd_free((tlb)->mm, pmd) + #endif /* _SPARC64_PGALLOC_H */ diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index b77128c80524..1e03c5a6b4f7 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -655,9 +655,11 @@ static inline int pte_special(pte_t pte) #define pte_unmap(pte) do { } while (0) /* Actual page table PTE updates. */ -extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig); +extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, + pte_t *ptep, pte_t orig, int fullmm); -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int fullmm) { pte_t orig = *ptep; @@ -670,12 +672,19 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *p * and SUN4V pte layout, so this inline test is fine. */ if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID)) - tlb_batch_add(mm, addr, ptep, orig); + tlb_batch_add(mm, addr, ptep, orig, fullmm); } +#define set_pte_at(mm,addr,ptep,pte) \ + __set_pte_at((mm), (addr), (ptep), (pte), 0) + #define pte_clear(mm,addr,ptep) \ set_pte_at((mm), (addr), (ptep), __pte(0UL)) +#define __HAVE_ARCH_PTE_CLEAR_NOT_PRESENT_FULL +#define pte_clear_not_present_full(mm,addr,ptep,fullmm) \ + __set_pte_at((mm), (addr), (ptep), __pte(0UL), (fullmm)) + #ifdef DCACHE_ALIASING_POSSIBLE #define __HAVE_ARCH_MOVE_PTE #define move_pte(pte, prot, old_addr, new_addr) \ diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h index dca406b9b6fc..190e18913cc6 100644 --- a/arch/sparc/include/asm/tlb_64.h +++ b/arch/sparc/include/asm/tlb_64.h @@ -7,66 +7,11 @@ #include <asm/tlbflush.h> #include <asm/mmu_context.h> -#define TLB_BATCH_NR 192 - -/* - * For UP we don't need to worry about TLB flush - * and page free order so much.. - */ -#ifdef CONFIG_SMP - #define FREE_PTE_NR 506 - #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U) -#else - #define FREE_PTE_NR 1 - #define tlb_fast_mode(bp) 1 -#endif - -struct mmu_gather { - struct mm_struct *mm; - unsigned int pages_nr; - unsigned int need_flush; - unsigned int fullmm; - unsigned int tlb_nr; - unsigned long vaddrs[TLB_BATCH_NR]; - struct page *pages[FREE_PTE_NR]; -}; - -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - #ifdef CONFIG_SMP extern void smp_flush_tlb_pending(struct mm_struct *, unsigned long, unsigned long *); #endif -extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *); -extern void flush_tlb_pending(void); - -static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) -{ - struct mmu_gather *mp = &get_cpu_var(mmu_gathers); - - BUG_ON(mp->tlb_nr); - - mp->mm = mm; - mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U; - mp->fullmm = full_mm_flush; - - return mp; -} - - -static inline void tlb_flush_mmu(struct mmu_gather *mp) -{ - if (!mp->fullmm) - flush_tlb_pending(); - if (mp->need_flush) { - free_pages_and_swap_cache(mp->pages, mp->pages_nr); - mp->pages_nr = 0; - mp->need_flush = 0; - } - -} - #ifdef CONFIG_SMP extern void smp_flush_tlb_mm(struct mm_struct *mm); #define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm) @@ -74,38 +19,14 @@ extern void smp_flush_tlb_mm(struct mm_struct *mm); #define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT) #endif -static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end) -{ - tlb_flush_mmu(mp); - - if (mp->fullmm) - mp->fullmm = 0; - - /* keep the page table cache within bounds */ - check_pgt_cache(); - - put_cpu_var(mmu_gathers); -} - -static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page) -{ - if (tlb_fast_mode(mp)) { - free_page_and_swap_cache(page); - return; - } - mp->need_flush = 1; - mp->pages[mp->pages_nr++] = page; - if (mp->pages_nr >= FREE_PTE_NR) - tlb_flush_mmu(mp); -} - -#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0) -#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage) -#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp) -#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr) +extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *); +extern void flush_tlb_pending(void); -#define tlb_migrate_finish(mm) do { } while (0) #define tlb_start_vma(tlb, vma) do { } while (0) #define tlb_end_vma(tlb, vma) do { } while (0) +#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) +#define tlb_flush(tlb) flush_tlb_pending() + +#include <asm-generic/tlb.h> #endif /* _SPARC64_TLB_H */ diff --git a/arch/sparc/include/asm/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h index fbb675dbe0c9..2ef463494153 100644 --- a/arch/sparc/include/asm/tlbflush_64.h +++ b/arch/sparc/include/asm/tlbflush_64.h @@ -5,9 +5,17 @@ #include <asm/mmu_context.h> /* TSB flush operations. */ -struct mmu_gather; + +#define TLB_BATCH_NR 192 + +struct tlb_batch { + struct mm_struct *mm; + unsigned long tlb_nr; + unsigned long vaddrs[TLB_BATCH_NR]; +}; + extern void flush_tsb_kernel_range(unsigned long start, unsigned long end); -extern void flush_tsb_user(struct mmu_gather *mp); +extern void flush_tsb_user(struct tlb_batch *tb); /* TLB flush operations. */ diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c index 3609bdee9ed2..3249d3f3234d 100644 --- a/arch/sparc/kernel/setup_32.c +++ b/arch/sparc/kernel/setup_32.c @@ -82,7 +82,7 @@ static void prom_sync_me(void) "nop\n\t" : : "r" (&trapbase)); prom_printf("PROM SYNC COMMAND...\n"); - show_free_areas(); + show_free_areas(0); if(current->pid != 0) { local_irq_enable(); sys_sync(); diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 92b557afe535..c0220759003e 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -108,7 +108,7 @@ SECTIONS __sun4v_2insn_patch_end = .; } - PERCPU(SMP_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(SMP_CACHE_BYTES) . = ALIGN(PAGE_SIZE); __init_end = .; diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c index 4c31e2b6e71b..ca217327e8d2 100644 --- a/arch/sparc/mm/init_32.c +++ b/arch/sparc/mm/init_32.c @@ -37,8 +37,6 @@ #include <asm/prom.h> #include <asm/leon.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - unsigned long *sparc_valid_addr_bitmap; EXPORT_SYMBOL(sparc_valid_addr_bitmap); @@ -78,7 +76,7 @@ void __init kmap_init(void) void show_mem(unsigned int filter) { printk("Mem-info:\n"); - show_free_areas(); + show_free_areas(filter); printk("Free swap: %6ldkB\n", nr_swap_pages << (PAGE_SHIFT-10)); printk("%ld pages of RAM\n", totalram_pages); diff --git a/arch/sparc/mm/tlb.c b/arch/sparc/mm/tlb.c index d8f21e24a82f..b1f279cd00bf 100644 --- a/arch/sparc/mm/tlb.c +++ b/arch/sparc/mm/tlb.c @@ -19,33 +19,34 @@ /* Heavily inspired by the ppc64 code. */ -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); +static DEFINE_PER_CPU(struct tlb_batch, tlb_batch); void flush_tlb_pending(void) { - struct mmu_gather *mp = &get_cpu_var(mmu_gathers); + struct tlb_batch *tb = &get_cpu_var(tlb_batch); - if (mp->tlb_nr) { - flush_tsb_user(mp); + if (tb->tlb_nr) { + flush_tsb_user(tb); - if (CTX_VALID(mp->mm->context)) { + if (CTX_VALID(tb->mm->context)) { #ifdef CONFIG_SMP - smp_flush_tlb_pending(mp->mm, mp->tlb_nr, - &mp->vaddrs[0]); + smp_flush_tlb_pending(tb->mm, tb->tlb_nr, + &tb->vaddrs[0]); #else - __flush_tlb_pending(CTX_HWBITS(mp->mm->context), - mp->tlb_nr, &mp->vaddrs[0]); + __flush_tlb_pending(CTX_HWBITS(tb->mm->context), + tb->tlb_nr, &tb->vaddrs[0]); #endif } - mp->tlb_nr = 0; + tb->tlb_nr = 0; } - put_cpu_var(mmu_gathers); + put_cpu_var(tlb_batch); } -void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig) +void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, + pte_t *ptep, pte_t orig, int fullmm) { - struct mmu_gather *mp = &__get_cpu_var(mmu_gathers); + struct tlb_batch *tb = &get_cpu_var(tlb_batch); unsigned long nr; vaddr &= PAGE_MASK; @@ -77,21 +78,25 @@ void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t no_cache_flush: - if (mp->fullmm) + if (fullmm) { + put_cpu_var(tlb_batch); return; + } - nr = mp->tlb_nr; + nr = tb->tlb_nr; - if (unlikely(nr != 0 && mm != mp->mm)) { + if (unlikely(nr != 0 && mm != tb->mm)) { flush_tlb_pending(); nr = 0; } if (nr == 0) - mp->mm = mm; + tb->mm = mm; - mp->vaddrs[nr] = vaddr; - mp->tlb_nr = ++nr; + tb->vaddrs[nr] = vaddr; + tb->tlb_nr = ++nr; if (nr >= TLB_BATCH_NR) flush_tlb_pending(); + + put_cpu_var(tlb_batch); } diff --git a/arch/sparc/mm/tsb.c b/arch/sparc/mm/tsb.c index 101d7c82870b..948461513499 100644 --- a/arch/sparc/mm/tsb.c +++ b/arch/sparc/mm/tsb.c @@ -47,12 +47,13 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end) } } -static void __flush_tsb_one(struct mmu_gather *mp, unsigned long hash_shift, unsigned long tsb, unsigned long nentries) +static void __flush_tsb_one(struct tlb_batch *tb, unsigned long hash_shift, + unsigned long tsb, unsigned long nentries) { unsigned long i; - for (i = 0; i < mp->tlb_nr; i++) { - unsigned long v = mp->vaddrs[i]; + for (i = 0; i < tb->tlb_nr; i++) { + unsigned long v = tb->vaddrs[i]; unsigned long tag, ent, hash; v &= ~0x1UL; @@ -65,9 +66,9 @@ static void __flush_tsb_one(struct mmu_gather *mp, unsigned long hash_shift, uns } } -void flush_tsb_user(struct mmu_gather *mp) +void flush_tsb_user(struct tlb_batch *tb) { - struct mm_struct *mm = mp->mm; + struct mm_struct *mm = tb->mm; unsigned long nentries, base, flags; spin_lock_irqsave(&mm->context.lock, flags); @@ -76,7 +77,7 @@ void flush_tsb_user(struct mmu_gather *mp) nentries = mm->context.tsb_block[MM_TSB_BASE].tsb_nentries; if (tlb_type == cheetah_plus || tlb_type == hypervisor) base = __pa(base); - __flush_tsb_one(mp, PAGE_SHIFT, base, nentries); + __flush_tsb_one(tb, PAGE_SHIFT, base, nentries); #ifdef CONFIG_HUGETLB_PAGE if (mm->context.tsb_block[MM_TSB_HUGE].tsb) { @@ -84,7 +85,7 @@ void flush_tsb_user(struct mmu_gather *mp) nentries = mm->context.tsb_block[MM_TSB_HUGE].tsb_nentries; if (tlb_type == cheetah_plus || tlb_type == hypervisor) base = __pa(base); - __flush_tsb_one(mp, HPAGE_SHIFT, base, nentries); + __flush_tsb_one(tb, HPAGE_SHIFT, base, nentries); } #endif spin_unlock_irqrestore(&mm->context.lock, flags); diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index e32b0c23c4c8..635e1bfb1c5d 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -339,6 +339,14 @@ config NO_IOPORT source "drivers/pci/Kconfig" +config HOTPLUG + bool "Support for hot-pluggable devices" + ---help--- + Say Y here if you want to plug devices into your computer while + the system is running, and be able to use them quickly. In many + cases, the devices can likewise be unplugged at any time too. + One well-known example of this is USB. + source "drivers/pci/hotplug/Kconfig" endmenu diff --git a/arch/tile/Kconfig.debug b/arch/tile/Kconfig.debug index 9bc161a02c71..ddbfc3322d7f 100644 --- a/arch/tile/Kconfig.debug +++ b/arch/tile/Kconfig.debug @@ -21,15 +21,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - config DEBUG_EXTRA_FLAGS string "Additional compiler arguments when building with '-g'" depends on DEBUG_INFO diff --git a/arch/tile/configs/tile_defconfig b/arch/tile/configs/tile_defconfig deleted file mode 100644 index 0fe54445fda5..000000000000 --- a/arch/tile/configs/tile_defconfig +++ /dev/null @@ -1,71 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="usr/contents.txt" -CONFIG_EXPERT=y -# CONFIG_COMPAT_BRK is not set -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_HZ_100=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -CONFIG_IPV6=y -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_NETDEVICES=y -CONFIG_TUN=y -# CONFIG_NETDEV_10000 is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_HID_SUPPORT is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_INTF_SYSFS is not set -# CONFIG_RTC_INTF_PROC is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_FUSE_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_HUGETLBFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_FRAME_WARN=2048 -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_VM=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_DEBUG_EXTRA_FLAGS="-femit-struct-debug-baseonly" diff --git a/arch/tile/configs/tilegx_defconfig b/arch/tile/configs/tilegx_defconfig new file mode 100644 index 000000000000..09f1c7fad8bf --- /dev/null +++ b/arch/tile/configs/tilegx_defconfig @@ -0,0 +1,1833 @@ +# +# Automatically generated make config: don't edit +# Linux/tilegx 2.6.39-rc5 Kernel Configuration +# Wed May 4 11:08:04 2011 +# +CONFIG_TILE=y +CONFIG_MMU=y +CONFIG_GENERIC_CSUM=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_ARCH_ALLOC_REMAP=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_DEFAULT_MIGRATION_COST=10000000 +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_STRICT_DEVMEM=y +CONFIG_SMP=y +# CONFIG_DEBUG_COPY_FROM_USER is not set +CONFIG_HVC_TILE=y +CONFIG_TILEGX=y +CONFIG_64BIT=y +CONFIG_ARCH_DEFCONFIG="arch/tile/configs/tilegx_defconfig" +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_FHANDLE is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_AUDIT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PENDING_IRQ=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=19 +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y +CONFIG_CGROUP_MEM_RES_CTLR_SWAP_ENABLED=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +# CONFIG_SCHED_AUTOGROUP is not set +CONFIG_MM_OWNER=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="usr/contents.txt" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +CONFIG_INITRAMFS_COMPRESSION_NONE=y +# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_THROTTLING is not set +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PADATA=y +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y + +# +# Tilera-specific configuration +# +CONFIG_NR_CPUS=100 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +# CONFIG_HIGHMEM is not set +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=2 +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_DISCONTIGMEM_MANUAL=y +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_COMPACTION is not set +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CMDLINE_BOOL is not set +CONFIG_VMALLOC_RESERVE=0x1000000 +CONFIG_HARDWALL=y +CONFIG_KERNEL_PL=1 + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_NO_IOMEM is not set +# CONFIG_NO_IOPORT is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_KCORE_ELF=y +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +# CONFIG_IP_FIB_TRIE_STATS is not set +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_IP_MROUTE=y +# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_IPV6_SUBTREES is not set +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set +CONFIG_IPV6_PIMSM_V2=y +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +# CONFIG_NF_CONNTRACK_SNMP is not set +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +# CONFIG_NF_CT_NETLINK is not set +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=y +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_IP_SET is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +# CONFIG_IP_VS_DH is not set +# CONFIG_IP_VS_SH is not set +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +# CONFIG_IP_VS_NFCT is not set +# CONFIG_IP_VS_PE_SIP is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=y +CONFIG_NF_CONNTRACK_IPV4=y +# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +# CONFIG_NF_NAT is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +CONFIG_RDS=m +CONFIG_RDS_TCP=m +# CONFIG_RDS_DEBUG is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_NET_DSA_MV88E6XXX=y +CONFIG_NET_DSA_MV88E6060=y +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +CONFIG_PHONET=m +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +# CONFIG_NET_SCH_SFB is not set +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +# CONFIG_NET_SCH_MQPRIO is not set +# CONFIG_NET_SCH_CHOKE is not set +CONFIG_NET_SCH_INGRESS=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_IPT=m +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +# CONFIG_NET_ACT_CSUM is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_DRBD is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_SX8=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_ATA_OVER_ETH=y +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_SENSORS_LIS3LV02D is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1780 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_BMP085 is not set +# CONFIG_PCH_PHUB is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=m +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +CONFIG_SCSI_TGT=m +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BNX2X_FCOE is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_AHCI_PLATFORM is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +CONFIG_SATA_SIL24=m +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARASAN_CF is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CS5536 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MULTICORE_RAID456=y +# CONFIG_MD_MULTIPATH is not set +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_DEBUG=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_RAID is not set +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +# CONFIG_DM_FLAKEY is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_IFB=m +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y +CONFIG_VETH=m +# CONFIG_ARCNET is not set +# CONFIG_MII is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_BCM63XX_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_MICREL_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=m +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_STMMAC_ETH is not set +# CONFIG_PCH_GBE is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set + +# +# CAIF transport drivers +# +# CONFIG_TILE_NET is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MFD_HSU is not set +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_PCH_UART is not set +# CONFIG_TTY_PRINTK is not set +CONFIG_HVC_DRIVER=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_RAMOOPS is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_MUX is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_INTEL_MID is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I2C_EG20T is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set + +# +# PPS generators support +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_MFD_SUPPORT=y +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS6507X is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_STUB_POULSBO is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_NFC_DEVICES is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS3232 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_TILE=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_DEFAULTS_TO_ORDERED=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_FS_XIP=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +CONFIG_JBD2_DEBUG=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +# CONFIG_OCFS2_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_NILFS2_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_FANOTIFY is not set +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +# CONFIG_PRINT_QUOTA_WARNING is not set +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +CONFIG_CUSE=m +CONFIG_GENERIC_ACL=y + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_ECRYPT_FS=m +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_XATTR is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_NFS_V4_1=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFS_USE_NEW_IDMAPPER is not set +CONFIG_NFSD=m +CONFIG_NFSD_DEPRECATED=y +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_CEPH_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_DFS_UPCALL=y +CONFIG_CIFS_FSCACHE=y +# CONFIG_CIFS_ACL is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +# CONFIG_ENABLE_WARN_DEPRECATED is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_REDUCED=y +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_DEBUG_LIST=y +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +CONFIG_DEBUG_CREDENTIALS=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y +# CONFIG_LKDTM is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BUILD_DOCSRC is not set +CONFIG_DYNAMIC_DEBUG=y +# CONFIG_ATOMIC64_SELFTEST is not set +CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_SAMPLES is not set +# CONFIG_TEST_KSTRTOX is not set +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_EXTRA_FLAGS="" + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_LSM_MMAP_MIN_ADDR=65536 +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_IMA is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_PCOMP2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_HIFN_795X=m +CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_NLATTR=y +# CONFIG_AVERAGE is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/tile/configs/tilepro_defconfig b/arch/tile/configs/tilepro_defconfig new file mode 100644 index 000000000000..f58dc362b944 --- /dev/null +++ b/arch/tile/configs/tilepro_defconfig @@ -0,0 +1,1163 @@ +# +# Automatically generated make config: don't edit +# Linux/tile 2.6.39-rc5 Kernel Configuration +# Tue May 3 09:15:02 2011 +# +CONFIG_TILE=y +CONFIG_MMU=y +CONFIG_GENERIC_CSUM=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_HAVE_ARCH_ALLOC_REMAP=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_DEFAULT_MIGRATION_COST=10000000 +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_STRICT_DEVMEM=y +CONFIG_SMP=y +# CONFIG_DEBUG_COPY_FROM_USER is not set +CONFIG_HVC_TILE=y +# CONFIG_TILEGX is not set +CONFIG_ARCH_DEFCONFIG="arch/tile/configs/tile_defconfig" +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_FHANDLE=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_HAVE_GENERIC_HARDIRQS=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PENDING_IRQ=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_RCU_FAST_NO_HZ is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_NAMESPACES is not set +# CONFIG_SCHED_AUTOGROUP is not set +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="usr/contents.txt" +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +CONFIG_INITRAMFS_COMPRESSION_NONE=y +# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_EMBEDDED=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_USE_GENERIC_SMP_HELPERS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +CONFIG_MUTEX_SPIN_ON_OWNER=y + +# +# Tilera-specific configuration +# +CONFIG_NR_CPUS=64 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_HZ_100=y +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 +CONFIG_SCHED_HRTICK=y +# CONFIG_KEXEC is not set +CONFIG_HIGHMEM=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=2 +# CONFIG_VMSPLIT_3_75G is not set +# CONFIG_VMSPLIT_3_5G is not set +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2_75G is not set +# CONFIG_VMSPLIT_2_5G is not set +# CONFIG_VMSPLIT_2_25G is not set +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_DISCONTIGMEM_MANUAL=y +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_COMPACTION is not set +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_CMDLINE_BOOL is not set +CONFIG_VMALLOC_RESERVE=0x1000000 +CONFIG_HARDWALL=y +CONFIG_KERNEL_PL=1 + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_NO_IOMEM is not set +# CONFIG_NO_IOPORT is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_KCORE_ELF=y +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +# CONFIG_BATMAN_ADV is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_SENSORS_LIS3LV02D is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_PCH_PHUB is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_SCSI_BNX2X_FCOE is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=y +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_MII is not set +# CONFIG_PHYLIB is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +# CONFIG_STMMAC_ETH is not set +# CONFIG_PCH_GBE is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set + +# +# CAIF transport drivers +# +CONFIG_TILE_NET=y +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_VMXNET3 is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MFD_HSU is not set +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_PCH_UART is not set +# CONFIG_TTY_PRINTK is not set +CONFIG_HVC_DRIVER=y +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_RAMOOPS is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set + +# +# PPS generators support +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_MFD_SUPPORT=y +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +# CONFIG_DRM is not set +# CONFIG_STUB_POULSBO is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_NFC_DEVICES is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_TILE=y +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +# CONFIG_RTC_INTF_SYSFS is not set +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_TILE=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_EXPORTFS=y +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_FANOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_QUOTACTL is not set +# CONFIG_AUTOFS4_FS is not set +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_LOCKUP_DETECTOR is not set +# CONFIG_HARDLOCKUP_DETECTOR is not set +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_SAMPLES is not set +# CONFIG_TEST_KSTRTOX is not set +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_STACKOVERFLOW=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_EXTRA_FLAGS="-femit-struct-debug-baseonly" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=m +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_PCRYPT is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +# CONFIG_XZ_DEC is not set +# CONFIG_XZ_DEC_BCJ is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_NLATTR=y +# CONFIG_AVERAGE is not set +CONFIG_HAVE_KVM=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/tile/include/arch/chip_tilegx.h b/arch/tile/include/arch/chip_tilegx.h new file mode 100644 index 000000000000..ea8e4f2c9483 --- /dev/null +++ b/arch/tile/include/arch/chip_tilegx.h @@ -0,0 +1,258 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * @file + * Global header file. + * This header file specifies defines for TILE-Gx. + */ + +#ifndef __ARCH_CHIP_H__ +#define __ARCH_CHIP_H__ + +/** Specify chip version. + * When possible, prefer the CHIP_xxx symbols below for future-proofing. + * This is intended for cross-compiling; native compilation should + * use the predefined __tile_chip__ symbol. + */ +#define TILE_CHIP 10 + +/** Specify chip revision. + * This provides for the case of a respin of a particular chip type; + * the normal value for this symbol is "0". + * This is intended for cross-compiling; native compilation should + * use the predefined __tile_chip_rev__ symbol. + */ +#define TILE_CHIP_REV 0 + +/** The name of this architecture. */ +#define CHIP_ARCH_NAME "tilegx" + +/** The ELF e_machine type for binaries for this chip. */ +#define CHIP_ELF_TYPE() EM_TILEGX + +/** The alternate ELF e_machine type for binaries for this chip. */ +#define CHIP_COMPAT_ELF_TYPE() 0x2597 + +/** What is the native word size of the machine? */ +#define CHIP_WORD_SIZE() 64 + +/** How many bits of a virtual address are used. Extra bits must be + * the sign extension of the low bits. + */ +#define CHIP_VA_WIDTH() 42 + +/** How many bits are in a physical address? */ +#define CHIP_PA_WIDTH() 40 + +/** Size of the L2 cache, in bytes. */ +#define CHIP_L2_CACHE_SIZE() 262144 + +/** Log size of an L2 cache line in bytes. */ +#define CHIP_L2_LOG_LINE_SIZE() 6 + +/** Size of an L2 cache line, in bytes. */ +#define CHIP_L2_LINE_SIZE() (1 << CHIP_L2_LOG_LINE_SIZE()) + +/** Associativity of the L2 cache. */ +#define CHIP_L2_ASSOC() 8 + +/** Size of the L1 data cache, in bytes. */ +#define CHIP_L1D_CACHE_SIZE() 32768 + +/** Log size of an L1 data cache line in bytes. */ +#define CHIP_L1D_LOG_LINE_SIZE() 6 + +/** Size of an L1 data cache line, in bytes. */ +#define CHIP_L1D_LINE_SIZE() (1 << CHIP_L1D_LOG_LINE_SIZE()) + +/** Associativity of the L1 data cache. */ +#define CHIP_L1D_ASSOC() 2 + +/** Size of the L1 instruction cache, in bytes. */ +#define CHIP_L1I_CACHE_SIZE() 32768 + +/** Log size of an L1 instruction cache line in bytes. */ +#define CHIP_L1I_LOG_LINE_SIZE() 6 + +/** Size of an L1 instruction cache line, in bytes. */ +#define CHIP_L1I_LINE_SIZE() (1 << CHIP_L1I_LOG_LINE_SIZE()) + +/** Associativity of the L1 instruction cache. */ +#define CHIP_L1I_ASSOC() 2 + +/** Stride with which flush instructions must be issued. */ +#define CHIP_FLUSH_STRIDE() CHIP_L2_LINE_SIZE() + +/** Stride with which inv instructions must be issued. */ +#define CHIP_INV_STRIDE() CHIP_L2_LINE_SIZE() + +/** Stride with which finv instructions must be issued. */ +#define CHIP_FINV_STRIDE() CHIP_L2_LINE_SIZE() + +/** Can the local cache coherently cache data that is homed elsewhere? */ +#define CHIP_HAS_COHERENT_LOCAL_CACHE() 1 + +/** How many simultaneous outstanding victims can the L2 cache have? */ +#define CHIP_MAX_OUTSTANDING_VICTIMS() 128 + +/** Does the TLB support the NC and NOALLOC bits? */ +#define CHIP_HAS_NC_AND_NOALLOC_BITS() 1 + +/** Does the chip support hash-for-home caching? */ +#define CHIP_HAS_CBOX_HOME_MAP() 1 + +/** Number of entries in the chip's home map tables. */ +#define CHIP_CBOX_HOME_MAP_SIZE() 128 + +/** Do uncacheable requests miss in the cache regardless of whether + * there is matching data? */ +#define CHIP_HAS_ENFORCED_UNCACHEABLE_REQUESTS() 1 + +/** Does the mf instruction wait for victims? */ +#define CHIP_HAS_MF_WAITS_FOR_VICTIMS() 0 + +/** Does the chip have an "inv" instruction that doesn't also flush? */ +#define CHIP_HAS_INV() 1 + +/** Does the chip have a "wh64" instruction? */ +#define CHIP_HAS_WH64() 1 + +/** Does this chip have a 'dword_align' instruction? */ +#define CHIP_HAS_DWORD_ALIGN() 0 + +/** Number of performance counters. */ +#define CHIP_PERFORMANCE_COUNTERS() 4 + +/** Does this chip have auxiliary performance counters? */ +#define CHIP_HAS_AUX_PERF_COUNTERS() 1 + +/** Is the CBOX_MSR1 SPR supported? */ +#define CHIP_HAS_CBOX_MSR1() 0 + +/** Is the TILE_RTF_HWM SPR supported? */ +#define CHIP_HAS_TILE_RTF_HWM() 1 + +/** Is the TILE_WRITE_PENDING SPR supported? */ +#define CHIP_HAS_TILE_WRITE_PENDING() 0 + +/** Is the PROC_STATUS SPR supported? */ +#define CHIP_HAS_PROC_STATUS_SPR() 1 + +/** Is the DSTREAM_PF SPR supported? */ +#define CHIP_HAS_DSTREAM_PF() 1 + +/** Log of the number of mshims we have. */ +#define CHIP_LOG_NUM_MSHIMS() 2 + +/** Are the bases of the interrupt vector areas fixed? */ +#define CHIP_HAS_FIXED_INTVEC_BASE() 0 + +/** Are the interrupt masks split up into 2 SPRs? */ +#define CHIP_HAS_SPLIT_INTR_MASK() 0 + +/** Is the cycle count split up into 2 SPRs? */ +#define CHIP_HAS_SPLIT_CYCLE() 0 + +/** Does the chip have a static network? */ +#define CHIP_HAS_SN() 0 + +/** Does the chip have a static network processor? */ +#define CHIP_HAS_SN_PROC() 0 + +/** Size of the L1 static network processor instruction cache, in bytes. */ +/* #define CHIP_L1SNI_CACHE_SIZE() -- does not apply to chip 10 */ + +/** Does the chip have DMA support in each tile? */ +#define CHIP_HAS_TILE_DMA() 0 + +/** Does the chip have the second revision of the directly accessible + * dynamic networks? This encapsulates a number of characteristics, + * including the absence of the catch-all, the absence of inline message + * tags, the absence of support for network context-switching, and so on. + */ +#define CHIP_HAS_REV1_XDN() 1 + +/** Does the chip have cmpexch and similar (fetchadd, exch, etc.)? */ +#define CHIP_HAS_CMPEXCH() 1 + +/** Does the chip have memory-mapped I/O support? */ +#define CHIP_HAS_MMIO() 1 + +/** Does the chip have post-completion interrupts? */ +#define CHIP_HAS_POST_COMPLETION_INTERRUPTS() 1 + +/** Does the chip have native single step support? */ +#define CHIP_HAS_SINGLE_STEP() 1 + +#ifndef __OPEN_SOURCE__ /* features only relevant to hypervisor-level code */ + +/** How many entries are present in the instruction TLB? */ +#define CHIP_ITLB_ENTRIES() 16 + +/** How many entries are present in the data TLB? */ +#define CHIP_DTLB_ENTRIES() 32 + +/** How many MAF entries does the XAUI shim have? */ +#define CHIP_XAUI_MAF_ENTRIES() 32 + +/** Does the memory shim have a source-id table? */ +#define CHIP_HAS_MSHIM_SRCID_TABLE() 0 + +/** Does the L1 instruction cache clear on reset? */ +#define CHIP_HAS_L1I_CLEAR_ON_RESET() 1 + +/** Does the chip come out of reset with valid coordinates on all tiles? + * Note that if defined, this also implies that the upper left is 1,1. + */ +#define CHIP_HAS_VALID_TILE_COORD_RESET() 1 + +/** Does the chip have unified packet formats? */ +#define CHIP_HAS_UNIFIED_PACKET_FORMATS() 1 + +/** Does the chip support write reordering? */ +#define CHIP_HAS_WRITE_REORDERING() 1 + +/** Does the chip support Y-X routing as well as X-Y? */ +#define CHIP_HAS_Y_X_ROUTING() 1 + +/** Is INTCTRL_3 managed with the correct MPL? */ +#define CHIP_HAS_INTCTRL_3_STATUS_FIX() 1 + +/** Is it possible to configure the chip to be big-endian? */ +#define CHIP_HAS_BIG_ENDIAN_CONFIG() 1 + +/** Is the CACHE_RED_WAY_OVERRIDDEN SPR supported? */ +#define CHIP_HAS_CACHE_RED_WAY_OVERRIDDEN() 0 + +/** Is the DIAG_TRACE_WAY SPR supported? */ +#define CHIP_HAS_DIAG_TRACE_WAY() 0 + +/** Is the MEM_STRIPE_CONFIG SPR supported? */ +#define CHIP_HAS_MEM_STRIPE_CONFIG() 1 + +/** Are the TLB_PERF SPRs supported? */ +#define CHIP_HAS_TLB_PERF() 1 + +/** Is the VDN_SNOOP_SHIM_CTL SPR supported? */ +#define CHIP_HAS_VDN_SNOOP_SHIM_CTL() 0 + +/** Does the chip support rev1 DMA packets? */ +#define CHIP_HAS_REV1_DMA_PACKETS() 1 + +/** Does the chip have an IPI shim? */ +#define CHIP_HAS_IPI() 1 + +#endif /* !__OPEN_SOURCE__ */ +#endif /* __ARCH_CHIP_H__ */ diff --git a/arch/tile/include/arch/icache.h b/arch/tile/include/arch/icache.h index 5c87c9016338..762eafa8a11e 100644 --- a/arch/tile/include/arch/icache.h +++ b/arch/tile/include/arch/icache.h @@ -16,7 +16,7 @@ /** * @file * - * Support for invalidating bytes in the instruction + * Support for invalidating bytes in the instruction cache. */ #ifndef __ARCH_ICACHE_H__ @@ -30,11 +30,10 @@ * * @param addr The start of memory to be invalidated. * @param size The number of bytes to be invalidated. - * @param page_size The system's page size, typically the PAGE_SIZE constant - * in sys/page.h. This value must be a power of two no larger - * than the page containing the code to be invalidated. If the value - * is smaller than the actual page size, this function will still - * work, but may run slower than necessary. + * @param page_size The system's page size, e.g. getpagesize() in userspace. + * This value must be a power of two no larger than the page containing + * the code to be invalidated. If the value is smaller than the actual page + * size, this function will still work, but may run slower than necessary. */ static __inline void invalidate_icache(const void* addr, unsigned long size, diff --git a/arch/tile/include/arch/interrupts_64.h b/arch/tile/include/arch/interrupts_64.h new file mode 100644 index 000000000000..5bb58b2e4e6f --- /dev/null +++ b/arch/tile/include/arch/interrupts_64.h @@ -0,0 +1,276 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef __ARCH_INTERRUPTS_H__ +#define __ARCH_INTERRUPTS_H__ + +/** Mask for an interrupt. */ +#ifdef __ASSEMBLER__ +/* Note: must handle breaking interrupts into high and low words manually. */ +#define INT_MASK(intno) (1 << (intno)) +#else +#define INT_MASK(intno) (1ULL << (intno)) +#endif + + +/** Where a given interrupt executes */ +#define INTERRUPT_VECTOR(i, pl) (0xFC000000 + ((pl) << 24) + ((i) << 8)) + +/** Where to store a vector for a given interrupt. */ +#define USER_INTERRUPT_VECTOR(i) INTERRUPT_VECTOR(i, 0) + +/** The base address of user-level interrupts. */ +#define USER_INTERRUPT_VECTOR_BASE INTERRUPT_VECTOR(0, 0) + + +/** Additional synthetic interrupt. */ +#define INT_BREAKPOINT (63) + +#define INT_MEM_ERROR 0 +#define INT_SINGLE_STEP_3 1 +#define INT_SINGLE_STEP_2 2 +#define INT_SINGLE_STEP_1 3 +#define INT_SINGLE_STEP_0 4 +#define INT_IDN_COMPLETE 5 +#define INT_UDN_COMPLETE 6 +#define INT_ITLB_MISS 7 +#define INT_ILL 8 +#define INT_GPV 9 +#define INT_IDN_ACCESS 10 +#define INT_UDN_ACCESS 11 +#define INT_SWINT_3 12 +#define INT_SWINT_2 13 +#define INT_SWINT_1 14 +#define INT_SWINT_0 15 +#define INT_ILL_TRANS 16 +#define INT_UNALIGN_DATA 17 +#define INT_DTLB_MISS 18 +#define INT_DTLB_ACCESS 19 +#define INT_IDN_FIREWALL 20 +#define INT_UDN_FIREWALL 21 +#define INT_TILE_TIMER 22 +#define INT_AUX_TILE_TIMER 23 +#define INT_IDN_TIMER 24 +#define INT_UDN_TIMER 25 +#define INT_IDN_AVAIL 26 +#define INT_UDN_AVAIL 27 +#define INT_IPI_3 28 +#define INT_IPI_2 29 +#define INT_IPI_1 30 +#define INT_IPI_0 31 +#define INT_PERF_COUNT 32 +#define INT_AUX_PERF_COUNT 33 +#define INT_INTCTRL_3 34 +#define INT_INTCTRL_2 35 +#define INT_INTCTRL_1 36 +#define INT_INTCTRL_0 37 +#define INT_BOOT_ACCESS 38 +#define INT_WORLD_ACCESS 39 +#define INT_I_ASID 40 +#define INT_D_ASID 41 +#define INT_DOUBLE_FAULT 42 + +#define NUM_INTERRUPTS 43 + +#ifndef __ASSEMBLER__ +#define QUEUED_INTERRUPTS ( \ + INT_MASK(INT_MEM_ERROR) | \ + INT_MASK(INT_IDN_COMPLETE) | \ + INT_MASK(INT_UDN_COMPLETE) | \ + INT_MASK(INT_IDN_FIREWALL) | \ + INT_MASK(INT_UDN_FIREWALL) | \ + INT_MASK(INT_TILE_TIMER) | \ + INT_MASK(INT_AUX_TILE_TIMER) | \ + INT_MASK(INT_IDN_TIMER) | \ + INT_MASK(INT_UDN_TIMER) | \ + INT_MASK(INT_IDN_AVAIL) | \ + INT_MASK(INT_UDN_AVAIL) | \ + INT_MASK(INT_IPI_3) | \ + INT_MASK(INT_IPI_2) | \ + INT_MASK(INT_IPI_1) | \ + INT_MASK(INT_IPI_0) | \ + INT_MASK(INT_PERF_COUNT) | \ + INT_MASK(INT_AUX_PERF_COUNT) | \ + INT_MASK(INT_INTCTRL_3) | \ + INT_MASK(INT_INTCTRL_2) | \ + INT_MASK(INT_INTCTRL_1) | \ + INT_MASK(INT_INTCTRL_0) | \ + INT_MASK(INT_BOOT_ACCESS) | \ + INT_MASK(INT_WORLD_ACCESS) | \ + INT_MASK(INT_I_ASID) | \ + INT_MASK(INT_D_ASID) | \ + INT_MASK(INT_DOUBLE_FAULT) | \ + 0) +#define NONQUEUED_INTERRUPTS ( \ + INT_MASK(INT_SINGLE_STEP_3) | \ + INT_MASK(INT_SINGLE_STEP_2) | \ + INT_MASK(INT_SINGLE_STEP_1) | \ + INT_MASK(INT_SINGLE_STEP_0) | \ + INT_MASK(INT_ITLB_MISS) | \ + INT_MASK(INT_ILL) | \ + INT_MASK(INT_GPV) | \ + INT_MASK(INT_IDN_ACCESS) | \ + INT_MASK(INT_UDN_ACCESS) | \ + INT_MASK(INT_SWINT_3) | \ + INT_MASK(INT_SWINT_2) | \ + INT_MASK(INT_SWINT_1) | \ + INT_MASK(INT_SWINT_0) | \ + INT_MASK(INT_ILL_TRANS) | \ + INT_MASK(INT_UNALIGN_DATA) | \ + INT_MASK(INT_DTLB_MISS) | \ + INT_MASK(INT_DTLB_ACCESS) | \ + 0) +#define CRITICAL_MASKED_INTERRUPTS ( \ + INT_MASK(INT_MEM_ERROR) | \ + INT_MASK(INT_SINGLE_STEP_3) | \ + INT_MASK(INT_SINGLE_STEP_2) | \ + INT_MASK(INT_SINGLE_STEP_1) | \ + INT_MASK(INT_SINGLE_STEP_0) | \ + INT_MASK(INT_IDN_COMPLETE) | \ + INT_MASK(INT_UDN_COMPLETE) | \ + INT_MASK(INT_IDN_FIREWALL) | \ + INT_MASK(INT_UDN_FIREWALL) | \ + INT_MASK(INT_TILE_TIMER) | \ + INT_MASK(INT_AUX_TILE_TIMER) | \ + INT_MASK(INT_IDN_TIMER) | \ + INT_MASK(INT_UDN_TIMER) | \ + INT_MASK(INT_IDN_AVAIL) | \ + INT_MASK(INT_UDN_AVAIL) | \ + INT_MASK(INT_IPI_3) | \ + INT_MASK(INT_IPI_2) | \ + INT_MASK(INT_IPI_1) | \ + INT_MASK(INT_IPI_0) | \ + INT_MASK(INT_PERF_COUNT) | \ + INT_MASK(INT_AUX_PERF_COUNT) | \ + INT_MASK(INT_INTCTRL_3) | \ + INT_MASK(INT_INTCTRL_2) | \ + INT_MASK(INT_INTCTRL_1) | \ + INT_MASK(INT_INTCTRL_0) | \ + 0) +#define CRITICAL_UNMASKED_INTERRUPTS ( \ + INT_MASK(INT_ITLB_MISS) | \ + INT_MASK(INT_ILL) | \ + INT_MASK(INT_GPV) | \ + INT_MASK(INT_IDN_ACCESS) | \ + INT_MASK(INT_UDN_ACCESS) | \ + INT_MASK(INT_SWINT_3) | \ + INT_MASK(INT_SWINT_2) | \ + INT_MASK(INT_SWINT_1) | \ + INT_MASK(INT_SWINT_0) | \ + INT_MASK(INT_ILL_TRANS) | \ + INT_MASK(INT_UNALIGN_DATA) | \ + INT_MASK(INT_DTLB_MISS) | \ + INT_MASK(INT_DTLB_ACCESS) | \ + INT_MASK(INT_BOOT_ACCESS) | \ + INT_MASK(INT_WORLD_ACCESS) | \ + INT_MASK(INT_I_ASID) | \ + INT_MASK(INT_D_ASID) | \ + INT_MASK(INT_DOUBLE_FAULT) | \ + 0) +#define MASKABLE_INTERRUPTS ( \ + INT_MASK(INT_MEM_ERROR) | \ + INT_MASK(INT_SINGLE_STEP_3) | \ + INT_MASK(INT_SINGLE_STEP_2) | \ + INT_MASK(INT_SINGLE_STEP_1) | \ + INT_MASK(INT_SINGLE_STEP_0) | \ + INT_MASK(INT_IDN_COMPLETE) | \ + INT_MASK(INT_UDN_COMPLETE) | \ + INT_MASK(INT_IDN_FIREWALL) | \ + INT_MASK(INT_UDN_FIREWALL) | \ + INT_MASK(INT_TILE_TIMER) | \ + INT_MASK(INT_AUX_TILE_TIMER) | \ + INT_MASK(INT_IDN_TIMER) | \ + INT_MASK(INT_UDN_TIMER) | \ + INT_MASK(INT_IDN_AVAIL) | \ + INT_MASK(INT_UDN_AVAIL) | \ + INT_MASK(INT_IPI_3) | \ + INT_MASK(INT_IPI_2) | \ + INT_MASK(INT_IPI_1) | \ + INT_MASK(INT_IPI_0) | \ + INT_MASK(INT_PERF_COUNT) | \ + INT_MASK(INT_AUX_PERF_COUNT) | \ + INT_MASK(INT_INTCTRL_3) | \ + INT_MASK(INT_INTCTRL_2) | \ + INT_MASK(INT_INTCTRL_1) | \ + INT_MASK(INT_INTCTRL_0) | \ + 0) +#define UNMASKABLE_INTERRUPTS ( \ + INT_MASK(INT_ITLB_MISS) | \ + INT_MASK(INT_ILL) | \ + INT_MASK(INT_GPV) | \ + INT_MASK(INT_IDN_ACCESS) | \ + INT_MASK(INT_UDN_ACCESS) | \ + INT_MASK(INT_SWINT_3) | \ + INT_MASK(INT_SWINT_2) | \ + INT_MASK(INT_SWINT_1) | \ + INT_MASK(INT_SWINT_0) | \ + INT_MASK(INT_ILL_TRANS) | \ + INT_MASK(INT_UNALIGN_DATA) | \ + INT_MASK(INT_DTLB_MISS) | \ + INT_MASK(INT_DTLB_ACCESS) | \ + INT_MASK(INT_BOOT_ACCESS) | \ + INT_MASK(INT_WORLD_ACCESS) | \ + INT_MASK(INT_I_ASID) | \ + INT_MASK(INT_D_ASID) | \ + INT_MASK(INT_DOUBLE_FAULT) | \ + 0) +#define SYNC_INTERRUPTS ( \ + INT_MASK(INT_SINGLE_STEP_3) | \ + INT_MASK(INT_SINGLE_STEP_2) | \ + INT_MASK(INT_SINGLE_STEP_1) | \ + INT_MASK(INT_SINGLE_STEP_0) | \ + INT_MASK(INT_IDN_COMPLETE) | \ + INT_MASK(INT_UDN_COMPLETE) | \ + INT_MASK(INT_ITLB_MISS) | \ + INT_MASK(INT_ILL) | \ + INT_MASK(INT_GPV) | \ + INT_MASK(INT_IDN_ACCESS) | \ + INT_MASK(INT_UDN_ACCESS) | \ + INT_MASK(INT_SWINT_3) | \ + INT_MASK(INT_SWINT_2) | \ + INT_MASK(INT_SWINT_1) | \ + INT_MASK(INT_SWINT_0) | \ + INT_MASK(INT_ILL_TRANS) | \ + INT_MASK(INT_UNALIGN_DATA) | \ + INT_MASK(INT_DTLB_MISS) | \ + INT_MASK(INT_DTLB_ACCESS) | \ + 0) +#define NON_SYNC_INTERRUPTS ( \ + INT_MASK(INT_MEM_ERROR) | \ + INT_MASK(INT_IDN_FIREWALL) | \ + INT_MASK(INT_UDN_FIREWALL) | \ + INT_MASK(INT_TILE_TIMER) | \ + INT_MASK(INT_AUX_TILE_TIMER) | \ + INT_MASK(INT_IDN_TIMER) | \ + INT_MASK(INT_UDN_TIMER) | \ + INT_MASK(INT_IDN_AVAIL) | \ + INT_MASK(INT_UDN_AVAIL) | \ + INT_MASK(INT_IPI_3) | \ + INT_MASK(INT_IPI_2) | \ + INT_MASK(INT_IPI_1) | \ + INT_MASK(INT_IPI_0) | \ + INT_MASK(INT_PERF_COUNT) | \ + INT_MASK(INT_AUX_PERF_COUNT) | \ + INT_MASK(INT_INTCTRL_3) | \ + INT_MASK(INT_INTCTRL_2) | \ + INT_MASK(INT_INTCTRL_1) | \ + INT_MASK(INT_INTCTRL_0) | \ + INT_MASK(INT_BOOT_ACCESS) | \ + INT_MASK(INT_WORLD_ACCESS) | \ + INT_MASK(INT_I_ASID) | \ + INT_MASK(INT_D_ASID) | \ + INT_MASK(INT_DOUBLE_FAULT) | \ + 0) +#endif /* !__ASSEMBLER__ */ +#endif /* !__ARCH_INTERRUPTS_H__ */ diff --git a/arch/tile/include/arch/spr_def.h b/arch/tile/include/arch/spr_def.h index 442fcba0d122..f548efeb2de3 100644 --- a/arch/tile/include/arch/spr_def.h +++ b/arch/tile/include/arch/spr_def.h @@ -12,6 +12,15 @@ * more details. */ +/* Include the proper base SPR definition file. */ +#ifdef __tilegx__ +#include <arch/spr_def_64.h> +#else +#include <arch/spr_def_32.h> +#endif + +#ifdef __KERNEL__ + /* * In addition to including the proper base SPR definition file, depending * on machine architecture, this file defines several macros which allow @@ -29,7 +38,6 @@ #define _concat4(a, b, c, d) __concat4(a, b, c, d) #ifdef __tilegx__ -#include <arch/spr_def_64.h> /* TILE-Gx dependent, protection-level dependent SPRs. */ @@ -65,7 +73,6 @@ _concat4(INT_SINGLE_STEP_, CONFIG_KERNEL_PL,,) #else -#include <arch/spr_def_32.h> /* TILEPro dependent, protection-level dependent SPRs. */ @@ -102,3 +109,5 @@ _concat4(SPR_INTCTRL_, CONFIG_KERNEL_PL, _STATUS,) #define INT_INTCTRL_K \ _concat4(INT_INTCTRL_, CONFIG_KERNEL_PL,,) + +#endif /* __KERNEL__ */ diff --git a/arch/tile/include/arch/spr_def_64.h b/arch/tile/include/arch/spr_def_64.h new file mode 100644 index 000000000000..cd3e5f95d5fd --- /dev/null +++ b/arch/tile/include/arch/spr_def_64.h @@ -0,0 +1,173 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef __DOXYGEN__ + +#ifndef __ARCH_SPR_DEF_H__ +#define __ARCH_SPR_DEF_H__ + +#define SPR_AUX_PERF_COUNT_0 0x2105 +#define SPR_AUX_PERF_COUNT_1 0x2106 +#define SPR_AUX_PERF_COUNT_CTL 0x2107 +#define SPR_AUX_PERF_COUNT_STS 0x2108 +#define SPR_CMPEXCH_VALUE 0x2780 +#define SPR_CYCLE 0x2781 +#define SPR_DONE 0x2705 +#define SPR_DSTREAM_PF 0x2706 +#define SPR_EVENT_BEGIN 0x2782 +#define SPR_EVENT_END 0x2783 +#define SPR_EX_CONTEXT_0_0 0x2580 +#define SPR_EX_CONTEXT_0_1 0x2581 +#define SPR_EX_CONTEXT_0_1__PL_SHIFT 0 +#define SPR_EX_CONTEXT_0_1__PL_RMASK 0x3 +#define SPR_EX_CONTEXT_0_1__PL_MASK 0x3 +#define SPR_EX_CONTEXT_0_1__ICS_SHIFT 2 +#define SPR_EX_CONTEXT_0_1__ICS_RMASK 0x1 +#define SPR_EX_CONTEXT_0_1__ICS_MASK 0x4 +#define SPR_EX_CONTEXT_1_0 0x2480 +#define SPR_EX_CONTEXT_1_1 0x2481 +#define SPR_EX_CONTEXT_1_1__PL_SHIFT 0 +#define SPR_EX_CONTEXT_1_1__PL_RMASK 0x3 +#define SPR_EX_CONTEXT_1_1__PL_MASK 0x3 +#define SPR_EX_CONTEXT_1_1__ICS_SHIFT 2 +#define SPR_EX_CONTEXT_1_1__ICS_RMASK 0x1 +#define SPR_EX_CONTEXT_1_1__ICS_MASK 0x4 +#define SPR_EX_CONTEXT_2_0 0x2380 +#define SPR_EX_CONTEXT_2_1 0x2381 +#define SPR_EX_CONTEXT_2_1__PL_SHIFT 0 +#define SPR_EX_CONTEXT_2_1__PL_RMASK 0x3 +#define SPR_EX_CONTEXT_2_1__PL_MASK 0x3 +#define SPR_EX_CONTEXT_2_1__ICS_SHIFT 2 +#define SPR_EX_CONTEXT_2_1__ICS_RMASK 0x1 +#define SPR_EX_CONTEXT_2_1__ICS_MASK 0x4 +#define SPR_FAIL 0x2707 +#define SPR_ILL_TRANS_REASON__I_STREAM_VA_RMASK 0x1 +#define SPR_INTCTRL_0_STATUS 0x2505 +#define SPR_INTCTRL_1_STATUS 0x2405 +#define SPR_INTCTRL_2_STATUS 0x2305 +#define SPR_INTERRUPT_CRITICAL_SECTION 0x2708 +#define SPR_INTERRUPT_MASK_0 0x2506 +#define SPR_INTERRUPT_MASK_1 0x2406 +#define SPR_INTERRUPT_MASK_2 0x2306 +#define SPR_INTERRUPT_MASK_RESET_0 0x2507 +#define SPR_INTERRUPT_MASK_RESET_1 0x2407 +#define SPR_INTERRUPT_MASK_RESET_2 0x2307 +#define SPR_INTERRUPT_MASK_SET_0 0x2508 +#define SPR_INTERRUPT_MASK_SET_1 0x2408 +#define SPR_INTERRUPT_MASK_SET_2 0x2308 +#define SPR_INTERRUPT_VECTOR_BASE_0 0x2509 +#define SPR_INTERRUPT_VECTOR_BASE_1 0x2409 +#define SPR_INTERRUPT_VECTOR_BASE_2 0x2309 +#define SPR_INTERRUPT_VECTOR_BASE_3 0x2209 +#define SPR_IPI_EVENT_0 0x1f05 +#define SPR_IPI_EVENT_1 0x1e05 +#define SPR_IPI_EVENT_2 0x1d05 +#define SPR_IPI_EVENT_RESET_0 0x1f06 +#define SPR_IPI_EVENT_RESET_1 0x1e06 +#define SPR_IPI_EVENT_RESET_2 0x1d06 +#define SPR_IPI_EVENT_SET_0 0x1f07 +#define SPR_IPI_EVENT_SET_1 0x1e07 +#define SPR_IPI_EVENT_SET_2 0x1d07 +#define SPR_IPI_MASK_0 0x1f08 +#define SPR_IPI_MASK_1 0x1e08 +#define SPR_IPI_MASK_2 0x1d08 +#define SPR_IPI_MASK_RESET_0 0x1f09 +#define SPR_IPI_MASK_RESET_1 0x1e09 +#define SPR_IPI_MASK_RESET_2 0x1d09 +#define SPR_IPI_MASK_SET_0 0x1f0a +#define SPR_IPI_MASK_SET_1 0x1e0a +#define SPR_IPI_MASK_SET_2 0x1d0a +#define SPR_MPL_AUX_TILE_TIMER_SET_0 0x1700 +#define SPR_MPL_AUX_TILE_TIMER_SET_1 0x1701 +#define SPR_MPL_AUX_TILE_TIMER_SET_2 0x1702 +#define SPR_MPL_INTCTRL_0_SET_0 0x2500 +#define SPR_MPL_INTCTRL_0_SET_1 0x2501 +#define SPR_MPL_INTCTRL_0_SET_2 0x2502 +#define SPR_MPL_INTCTRL_1_SET_0 0x2400 +#define SPR_MPL_INTCTRL_1_SET_1 0x2401 +#define SPR_MPL_INTCTRL_1_SET_2 0x2402 +#define SPR_MPL_INTCTRL_2_SET_0 0x2300 +#define SPR_MPL_INTCTRL_2_SET_1 0x2301 +#define SPR_MPL_INTCTRL_2_SET_2 0x2302 +#define SPR_MPL_UDN_ACCESS_SET_0 0x0b00 +#define SPR_MPL_UDN_ACCESS_SET_1 0x0b01 +#define SPR_MPL_UDN_ACCESS_SET_2 0x0b02 +#define SPR_MPL_UDN_AVAIL_SET_0 0x1b00 +#define SPR_MPL_UDN_AVAIL_SET_1 0x1b01 +#define SPR_MPL_UDN_AVAIL_SET_2 0x1b02 +#define SPR_MPL_UDN_COMPLETE_SET_0 0x0600 +#define SPR_MPL_UDN_COMPLETE_SET_1 0x0601 +#define SPR_MPL_UDN_COMPLETE_SET_2 0x0602 +#define SPR_MPL_UDN_FIREWALL_SET_0 0x1500 +#define SPR_MPL_UDN_FIREWALL_SET_1 0x1501 +#define SPR_MPL_UDN_FIREWALL_SET_2 0x1502 +#define SPR_MPL_UDN_TIMER_SET_0 0x1900 +#define SPR_MPL_UDN_TIMER_SET_1 0x1901 +#define SPR_MPL_UDN_TIMER_SET_2 0x1902 +#define SPR_MPL_WORLD_ACCESS_SET_0 0x2700 +#define SPR_MPL_WORLD_ACCESS_SET_1 0x2701 +#define SPR_MPL_WORLD_ACCESS_SET_2 0x2702 +#define SPR_PASS 0x2709 +#define SPR_PERF_COUNT_0 0x2005 +#define SPR_PERF_COUNT_1 0x2006 +#define SPR_PERF_COUNT_CTL 0x2007 +#define SPR_PERF_COUNT_DN_CTL 0x2008 +#define SPR_PERF_COUNT_STS 0x2009 +#define SPR_PROC_STATUS 0x2784 +#define SPR_SIM_CONTROL 0x2785 +#define SPR_SINGLE_STEP_CONTROL_0 0x0405 +#define SPR_SINGLE_STEP_CONTROL_0__CANCELED_MASK 0x1 +#define SPR_SINGLE_STEP_CONTROL_0__INHIBIT_MASK 0x2 +#define SPR_SINGLE_STEP_CONTROL_1 0x0305 +#define SPR_SINGLE_STEP_CONTROL_1__CANCELED_MASK 0x1 +#define SPR_SINGLE_STEP_CONTROL_1__INHIBIT_MASK 0x2 +#define SPR_SINGLE_STEP_CONTROL_2 0x0205 +#define SPR_SINGLE_STEP_CONTROL_2__CANCELED_MASK 0x1 +#define SPR_SINGLE_STEP_CONTROL_2__INHIBIT_MASK 0x2 +#define SPR_SINGLE_STEP_EN_0_0 0x250a +#define SPR_SINGLE_STEP_EN_0_1 0x240a +#define SPR_SINGLE_STEP_EN_0_2 0x230a +#define SPR_SINGLE_STEP_EN_1_0 0x250b +#define SPR_SINGLE_STEP_EN_1_1 0x240b +#define SPR_SINGLE_STEP_EN_1_2 0x230b +#define SPR_SINGLE_STEP_EN_2_0 0x250c +#define SPR_SINGLE_STEP_EN_2_1 0x240c +#define SPR_SINGLE_STEP_EN_2_2 0x230c +#define SPR_SYSTEM_SAVE_0_0 0x2582 +#define SPR_SYSTEM_SAVE_0_1 0x2583 +#define SPR_SYSTEM_SAVE_0_2 0x2584 +#define SPR_SYSTEM_SAVE_0_3 0x2585 +#define SPR_SYSTEM_SAVE_1_0 0x2482 +#define SPR_SYSTEM_SAVE_1_1 0x2483 +#define SPR_SYSTEM_SAVE_1_2 0x2484 +#define SPR_SYSTEM_SAVE_1_3 0x2485 +#define SPR_SYSTEM_SAVE_2_0 0x2382 +#define SPR_SYSTEM_SAVE_2_1 0x2383 +#define SPR_SYSTEM_SAVE_2_2 0x2384 +#define SPR_SYSTEM_SAVE_2_3 0x2385 +#define SPR_TILE_COORD 0x270b +#define SPR_TILE_RTF_HWM 0x270c +#define SPR_TILE_TIMER_CONTROL 0x1605 +#define SPR_UDN_AVAIL_EN 0x1b05 +#define SPR_UDN_DATA_AVAIL 0x0b80 +#define SPR_UDN_DEADLOCK_TIMEOUT 0x1906 +#define SPR_UDN_DEMUX_COUNT_0 0x0b05 +#define SPR_UDN_DEMUX_COUNT_1 0x0b06 +#define SPR_UDN_DEMUX_COUNT_2 0x0b07 +#define SPR_UDN_DEMUX_COUNT_3 0x0b08 +#define SPR_UDN_DIRECTION_PROTECT 0x1505 + +#endif /* !defined(__ARCH_SPR_DEF_H__) */ + +#endif /* !defined(__DOXYGEN__) */ diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h index 75a16028a952..739cfe0499d1 100644 --- a/arch/tile/include/asm/atomic.h +++ b/arch/tile/include/asm/atomic.h @@ -130,17 +130,52 @@ static inline int atomic_read(const atomic_t *v) */ #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* - * We define xchg() and cmpxchg() in the included headers. - * Note that we do not define __HAVE_ARCH_CMPXCHG, since that would imply - * that cmpxchg() is an efficient operation, which is not particularly true. - */ - /* Nonexistent functions intended to cause link errors. */ extern unsigned long __xchg_called_with_bad_pointer(void); extern unsigned long __cmpxchg_called_with_bad_pointer(void); +#define xchg(ptr, x) \ + ({ \ + typeof(*(ptr)) __x; \ + switch (sizeof(*(ptr))) { \ + case 4: \ + __x = (typeof(__x))(typeof(__x-__x))atomic_xchg( \ + (atomic_t *)(ptr), \ + (u32)(typeof((x)-(x)))(x)); \ + break; \ + case 8: \ + __x = (typeof(__x))(typeof(__x-__x))atomic64_xchg( \ + (atomic64_t *)(ptr), \ + (u64)(typeof((x)-(x)))(x)); \ + break; \ + default: \ + __xchg_called_with_bad_pointer(); \ + } \ + __x; \ + }) + +#define cmpxchg(ptr, o, n) \ + ({ \ + typeof(*(ptr)) __x; \ + switch (sizeof(*(ptr))) { \ + case 4: \ + __x = (typeof(__x))(typeof(__x-__x))atomic_cmpxchg( \ + (atomic_t *)(ptr), \ + (u32)(typeof((o)-(o)))(o), \ + (u32)(typeof((n)-(n)))(n)); \ + break; \ + case 8: \ + __x = (typeof(__x))(typeof(__x-__x))atomic64_cmpxchg( \ + (atomic64_t *)(ptr), \ + (u64)(typeof((o)-(o)))(o), \ + (u64)(typeof((n)-(n)))(n)); \ + break; \ + default: \ + __cmpxchg_called_with_bad_pointer(); \ + } \ + __x; \ + }) + #define tas(ptr) (xchg((ptr), 1)) #endif /* __ASSEMBLY__ */ diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h index ed359aee8837..92a8bee32311 100644 --- a/arch/tile/include/asm/atomic_32.h +++ b/arch/tile/include/asm/atomic_32.h @@ -110,16 +110,6 @@ static inline void atomic_set(atomic_t *v, int n) _atomic_xchg(v, n); } -#define xchg(ptr, x) ((typeof(*(ptr))) \ - ((sizeof(*(ptr)) == sizeof(atomic_t)) ? \ - atomic_xchg((atomic_t *)(ptr), (long)(x)) : \ - __xchg_called_with_bad_pointer())) - -#define cmpxchg(ptr, o, n) ((typeof(*(ptr))) \ - ((sizeof(*(ptr)) == sizeof(atomic_t)) ? \ - atomic_cmpxchg((atomic_t *)(ptr), (long)(o), (long)(n)) : \ - __cmpxchg_called_with_bad_pointer())) - /* A 64bit atomic type */ typedef struct { diff --git a/arch/tile/include/asm/atomic_64.h b/arch/tile/include/asm/atomic_64.h new file mode 100644 index 000000000000..1c1e60d8ccb6 --- /dev/null +++ b/arch/tile/include/asm/atomic_64.h @@ -0,0 +1,156 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Do not include directly; use <asm/atomic.h>. + */ + +#ifndef _ASM_TILE_ATOMIC_64_H +#define _ASM_TILE_ATOMIC_64_H + +#ifndef __ASSEMBLY__ + +#include <arch/spr_def.h> + +/* First, the 32-bit atomic ops that are "real" on our 64-bit platform. */ + +#define atomic_set(v, i) ((v)->counter = (i)) + +/* + * The smp_mb() operations throughout are to support the fact that + * Linux requires memory barriers before and after the operation, + * on any routine which updates memory and returns a value. + */ + +static inline int atomic_cmpxchg(atomic_t *v, int o, int n) +{ + int val; + __insn_mtspr(SPR_CMPEXCH_VALUE, o); + smp_mb(); /* barrier for proper semantics */ + val = __insn_cmpexch4((void *)&v->counter, n); + smp_mb(); /* barrier for proper semantics */ + return val; +} + +static inline int atomic_xchg(atomic_t *v, int n) +{ + int val; + smp_mb(); /* barrier for proper semantics */ + val = __insn_exch4((void *)&v->counter, n); + smp_mb(); /* barrier for proper semantics */ + return val; +} + +static inline void atomic_add(int i, atomic_t *v) +{ + __insn_fetchadd4((void *)&v->counter, i); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + int val; + smp_mb(); /* barrier for proper semantics */ + val = __insn_fetchadd4((void *)&v->counter, i) + i; + barrier(); /* the "+ i" above will wait on memory */ + return val; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int guess, oldval = v->counter; + do { + if (oldval == u) + break; + guess = oldval; + oldval = atomic_cmpxchg(v, guess, guess + a); + } while (guess != oldval); + return oldval != u; +} + +/* Now the true 64-bit operations. */ + +#define ATOMIC64_INIT(i) { (i) } + +#define atomic64_read(v) ((v)->counter) +#define atomic64_set(v, i) ((v)->counter = (i)) + +static inline long atomic64_cmpxchg(atomic64_t *v, long o, long n) +{ + long val; + smp_mb(); /* barrier for proper semantics */ + __insn_mtspr(SPR_CMPEXCH_VALUE, o); + val = __insn_cmpexch((void *)&v->counter, n); + smp_mb(); /* barrier for proper semantics */ + return val; +} + +static inline long atomic64_xchg(atomic64_t *v, long n) +{ + long val; + smp_mb(); /* barrier for proper semantics */ + val = __insn_exch((void *)&v->counter, n); + smp_mb(); /* barrier for proper semantics */ + return val; +} + +static inline void atomic64_add(long i, atomic64_t *v) +{ + __insn_fetchadd((void *)&v->counter, i); +} + +static inline long atomic64_add_return(long i, atomic64_t *v) +{ + int val; + smp_mb(); /* barrier for proper semantics */ + val = __insn_fetchadd((void *)&v->counter, i) + i; + barrier(); /* the "+ i" above will wait on memory */ + return val; +} + +static inline long atomic64_add_unless(atomic64_t *v, long a, long u) +{ + long guess, oldval = v->counter; + do { + if (oldval == u) + break; + guess = oldval; + oldval = atomic64_cmpxchg(v, guess, guess + a); + } while (guess != oldval); + return oldval != u; +} + +#define atomic64_sub_return(i, v) atomic64_add_return(-(i), (v)) +#define atomic64_sub(i, v) atomic64_add(-(i), (v)) +#define atomic64_inc_return(v) atomic64_add_return(1, (v)) +#define atomic64_dec_return(v) atomic64_sub_return(1, (v)) +#define atomic64_inc(v) atomic64_add(1, (v)) +#define atomic64_dec(v) atomic64_sub(1, (v)) + +#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0) +#define atomic64_dec_and_test(v) (atomic64_dec_return(v) == 0) +#define atomic64_sub_and_test(i, v) (atomic64_sub_return((i), (v)) == 0) +#define atomic64_add_negative(i, v) (atomic64_add_return((i), (v)) < 0) + +#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) + +/* Atomic dec and inc don't implement barrier, so provide them if needed. */ +#define smp_mb__before_atomic_dec() smp_mb() +#define smp_mb__after_atomic_dec() smp_mb() +#define smp_mb__before_atomic_inc() smp_mb() +#define smp_mb__after_atomic_inc() smp_mb() + +/* Define this to indicate that cmpxchg is an efficient operation. */ +#define __HAVE_ARCH_CMPXCHG + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_TILE_ATOMIC_64_H */ diff --git a/arch/tile/include/asm/backtrace.h b/arch/tile/include/asm/backtrace.h index f18887d82399..bd5399a69edf 100644 --- a/arch/tile/include/asm/backtrace.h +++ b/arch/tile/include/asm/backtrace.h @@ -12,80 +12,41 @@ * more details. */ -#ifndef _TILE_BACKTRACE_H -#define _TILE_BACKTRACE_H - - +#ifndef _ASM_TILE_BACKTRACE_H +#define _ASM_TILE_BACKTRACE_H #include <linux/types.h> -#include <arch/chip.h> - -#if defined(__tile__) -typedef unsigned long VirtualAddress; -#elif CHIP_VA_WIDTH() > 32 -typedef unsigned long long VirtualAddress; -#else -typedef unsigned int VirtualAddress; -#endif - - -/** Reads 'size' bytes from 'address' and writes the data to 'result'. +/* Reads 'size' bytes from 'address' and writes the data to 'result'. * Returns true if successful, else false (e.g. memory not readable). */ typedef bool (*BacktraceMemoryReader)(void *result, - VirtualAddress address, + unsigned long address, unsigned int size, void *extra); typedef struct { - /** Current PC. */ - VirtualAddress pc; + /* Current PC. */ + unsigned long pc; - /** Current stack pointer value. */ - VirtualAddress sp; + /* Current stack pointer value. */ + unsigned long sp; - /** Current frame pointer value (i.e. caller's stack pointer) */ - VirtualAddress fp; + /* Current frame pointer value (i.e. caller's stack pointer) */ + unsigned long fp; - /** Internal use only: caller's PC for first frame. */ - VirtualAddress initial_frame_caller_pc; + /* Internal use only: caller's PC for first frame. */ + unsigned long initial_frame_caller_pc; - /** Internal use only: callback to read memory. */ + /* Internal use only: callback to read memory. */ BacktraceMemoryReader read_memory_func; - /** Internal use only: arbitrary argument to read_memory_func. */ + /* Internal use only: arbitrary argument to read_memory_func. */ void *read_memory_func_extra; } BacktraceIterator; -/** Initializes a backtracer to start from the given location. - * - * If the frame pointer cannot be determined it is set to -1. - * - * @param state The state to be filled in. - * @param read_memory_func A callback that reads memory. If NULL, a default - * value is provided. - * @param read_memory_func_extra An arbitrary argument to read_memory_func. - * @param pc The current PC. - * @param lr The current value of the 'lr' register. - * @param sp The current value of the 'sp' register. - * @param r52 The current value of the 'r52' register. - */ -extern void backtrace_init(BacktraceIterator *state, - BacktraceMemoryReader read_memory_func, - void *read_memory_func_extra, - VirtualAddress pc, VirtualAddress lr, - VirtualAddress sp, VirtualAddress r52); - - -/** Advances the backtracing state to the calling frame, returning - * true iff successful. - */ -extern bool backtrace_next(BacktraceIterator *state); - - typedef enum { /* We have no idea what the caller's pc is. */ @@ -138,7 +99,7 @@ enum { }; -/** Internal constants used to define 'info' operands. */ +/* Internal constants used to define 'info' operands. */ enum { /* 0 and 1 are reserved, as are all negative numbers. */ @@ -147,13 +108,10 @@ enum { CALLER_SP_IN_R52_BASE = 4, CALLER_SP_OFFSET_BASE = 8, - - /* Marks the entry point of certain functions. */ - ENTRY_POINT_INFO_OP = 16 }; -/** Current backtracer state describing where it thinks the caller is. */ +/* Current backtracer state describing where it thinks the caller is. */ typedef struct { /* * Public fields @@ -192,7 +150,13 @@ typedef struct { } CallerLocation; +extern void backtrace_init(BacktraceIterator *state, + BacktraceMemoryReader read_memory_func, + void *read_memory_func_extra, + unsigned long pc, unsigned long lr, + unsigned long sp, unsigned long r52); +extern bool backtrace_next(BacktraceIterator *state); -#endif /* _TILE_BACKTRACE_H */ +#endif /* _ASM_TILE_BACKTRACE_H */ diff --git a/arch/tile/include/asm/bitops.h b/arch/tile/include/asm/bitops.h index 132e6bbd07e9..16f1fa51fea1 100644 --- a/arch/tile/include/asm/bitops.h +++ b/arch/tile/include/asm/bitops.h @@ -122,6 +122,7 @@ static inline unsigned long __arch_hweight64(__u64 w) #include <asm-generic/bitops/lock.h> #include <asm-generic/bitops/find.h> #include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/non-atomic.h> #include <asm-generic/bitops/le.h> #endif /* _ASM_TILE_BITOPS_H */ diff --git a/arch/tile/include/asm/bitops_32.h b/arch/tile/include/asm/bitops_32.h index 2638be51a164..d31ab905cfa7 100644 --- a/arch/tile/include/asm/bitops_32.h +++ b/arch/tile/include/asm/bitops_32.h @@ -126,7 +126,6 @@ static inline int test_and_change_bit(unsigned nr, #define smp_mb__before_clear_bit() smp_mb() #define smp_mb__after_clear_bit() do {} while (0) -#include <asm-generic/bitops/non-atomic.h> #include <asm-generic/bitops/ext2-atomic.h> #endif /* _ASM_TILE_BITOPS_32_H */ diff --git a/arch/tile/include/asm/bitops_64.h b/arch/tile/include/asm/bitops_64.h new file mode 100644 index 000000000000..99615e8d2d8b --- /dev/null +++ b/arch/tile/include/asm/bitops_64.h @@ -0,0 +1,105 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#ifndef _ASM_TILE_BITOPS_64_H +#define _ASM_TILE_BITOPS_64_H + +#include <linux/compiler.h> +#include <asm/atomic.h> +#include <asm/system.h> + +/* See <asm/bitops.h> for API comments. */ + +static inline void set_bit(unsigned nr, volatile unsigned long *addr) +{ + unsigned long mask = (1UL << (nr % BITS_PER_LONG)); + __insn_fetchor((void *)(addr + nr / BITS_PER_LONG), mask); +} + +static inline void clear_bit(unsigned nr, volatile unsigned long *addr) +{ + unsigned long mask = (1UL << (nr % BITS_PER_LONG)); + __insn_fetchand((void *)(addr + nr / BITS_PER_LONG), ~mask); +} + +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() + + +static inline void change_bit(unsigned nr, volatile unsigned long *addr) +{ + unsigned long old, mask = (1UL << (nr % BITS_PER_LONG)); + long guess, oldval; + addr += nr / BITS_PER_LONG; + old = *addr; + do { + guess = oldval; + oldval = atomic64_cmpxchg((atomic64_t *)addr, + guess, guess ^ mask); + } while (guess != oldval); +} + + +/* + * The test_and_xxx_bit() routines require a memory fence before we + * start the operation, and after the operation completes. We use + * smp_mb() before, and rely on the "!= 0" comparison, plus a compiler + * barrier(), to block until the atomic op is complete. + */ + +static inline int test_and_set_bit(unsigned nr, volatile unsigned long *addr) +{ + int val; + unsigned long mask = (1UL << (nr % BITS_PER_LONG)); + smp_mb(); /* barrier for proper semantics */ + val = (__insn_fetchor((void *)(addr + nr / BITS_PER_LONG), mask) + & mask) != 0; + barrier(); + return val; +} + + +static inline int test_and_clear_bit(unsigned nr, volatile unsigned long *addr) +{ + int val; + unsigned long mask = (1UL << (nr % BITS_PER_LONG)); + smp_mb(); /* barrier for proper semantics */ + val = (__insn_fetchand((void *)(addr + nr / BITS_PER_LONG), ~mask) + & mask) != 0; + barrier(); + return val; +} + + +static inline int test_and_change_bit(unsigned nr, + volatile unsigned long *addr) +{ + unsigned long mask = (1UL << (nr % BITS_PER_LONG)); + long guess, oldval = *addr; + addr += nr / BITS_PER_LONG; + oldval = *addr; + do { + guess = oldval; + oldval = atomic64_cmpxchg((atomic64_t *)addr, + guess, guess ^ mask); + } while (guess != oldval); + return (oldval & mask) != 0; +} + +#define ext2_set_bit_atomic(lock, nr, addr) \ + test_and_set_bit((nr), (unsigned long *)(addr)) +#define ext2_clear_bit_atomic(lock, nr, addr) \ + test_and_clear_bit((nr), (unsigned long *)(addr)) + +#endif /* _ASM_TILE_BITOPS_64_H */ diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h index 12fb0fb330ee..e925f4bb498f 100644 --- a/arch/tile/include/asm/cacheflush.h +++ b/arch/tile/include/asm/cacheflush.h @@ -116,22 +116,28 @@ static inline void __finv_buffer(void *buffer, size_t size) } -/* Invalidate a VA range, then memory fence. */ +/* Invalidate a VA range and wait for it to be complete. */ static inline void inv_buffer(void *buffer, size_t size) { __inv_buffer(buffer, size); - mb_incoherent(); + mb(); } -/* Flush a VA range, then memory fence. */ -static inline void flush_buffer(void *buffer, size_t size) +/* + * Flush a locally-homecached VA range and wait for the evicted + * cachelines to hit memory. + */ +static inline void flush_buffer_local(void *buffer, size_t size) { __flush_buffer(buffer, size); mb_incoherent(); } -/* Flush & invalidate a VA range, then memory fence. */ -static inline void finv_buffer(void *buffer, size_t size) +/* + * Flush and invalidate a locally-homecached VA range and wait for the + * evicted cachelines to hit memory. + */ +static inline void finv_buffer_local(void *buffer, size_t size) { __finv_buffer(buffer, size); mb_incoherent(); diff --git a/arch/tile/include/asm/compat.h b/arch/tile/include/asm/compat.h index c3ae570c0a5d..bf95f55b82b0 100644 --- a/arch/tile/include/asm/compat.h +++ b/arch/tile/include/asm/compat.h @@ -215,8 +215,8 @@ struct compat_sigaction; struct compat_siginfo; struct compat_sigaltstack; long compat_sys_execve(const char __user *path, - const compat_uptr_t __user *argv, - const compat_uptr_t __user *envp, struct pt_regs *); + compat_uptr_t __user *argv, + compat_uptr_t __user *envp, struct pt_regs *); long compat_sys_rt_sigaction(int sig, struct compat_sigaction __user *act, struct compat_sigaction __user *oact, size_t sigsetsize); diff --git a/arch/tile/include/asm/dma-mapping.h b/arch/tile/include/asm/dma-mapping.h index 15e1dceecc64..eaa06d175b39 100644 --- a/arch/tile/include/asm/dma-mapping.h +++ b/arch/tile/include/asm/dma-mapping.h @@ -65,7 +65,8 @@ extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long offset, size_t, enum dma_data_direction); -extern void dma_cache_sync(void *vaddr, size_t, enum dma_data_direction); +extern void dma_cache_sync(struct device *dev, void *vaddr, size_t, + enum dma_data_direction); static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) diff --git a/arch/tile/include/asm/fb.h b/arch/tile/include/asm/fb.h new file mode 100644 index 000000000000..3a4988e8df45 --- /dev/null +++ b/arch/tile/include/asm/fb.h @@ -0,0 +1 @@ +#include <asm-generic/fb.h> diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h index d3cbb9b14cbe..c9ea1652af03 100644 --- a/arch/tile/include/asm/io.h +++ b/arch/tile/include/asm/io.h @@ -52,6 +52,7 @@ extern void iounmap(volatile void __iomem *addr); #endif #define ioremap_nocache(physaddr, size) ioremap(physaddr, size) +#define ioremap_wc(physaddr, size) ioremap(physaddr, size) #define ioremap_writethrough(physaddr, size) ioremap(physaddr, size) #define ioremap_fullcache(physaddr, size) ioremap(physaddr, size) @@ -161,6 +162,15 @@ static inline void _tile_writeq(u64 val, unsigned long addr) #define iowrite32 writel #define iowrite64 writeq +static inline void memset_io(void *dst, int val, size_t len) +{ + int x; + BUG_ON((unsigned long)dst & 0x3); + val = (val & 0xff) * 0x01010101; + for (x = 0; x < len; x += 4) + writel(val, dst + x); +} + static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, size_t len) { @@ -269,6 +279,11 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) ioport_panic(); } +#define ioread16be(addr) be16_to_cpu(ioread16(addr)) +#define ioread32be(addr) be32_to_cpu(ioread32(addr)) +#define iowrite16be(v, addr) iowrite16(be16_to_cpu(v), (addr)) +#define iowrite32be(v, addr) iowrite32(be32_to_cpu(v), (addr)) + #define ioread8_rep(p, dst, count) \ insb((unsigned long) (p), (dst), (count)) #define ioread16_rep(p, dst, count) \ @@ -283,4 +298,7 @@ static inline void outsl(unsigned long addr, const void *buffer, int count) #define iowrite32_rep(p, src, count) \ outsl((unsigned long) (p), (src), (count)) +#define virt_to_bus virt_to_phys +#define bus_to_virt phys_to_virt + #endif /* _ASM_TILE_IO_H */ diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 572fd3ef1d73..94e9a511de84 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -23,6 +23,8 @@ /* IRQ numbers used for linux IPIs. */ #define IRQ_RESCHEDULE 1 +#define irq_canonicalize(irq) (irq) + void ack_bad_irq(unsigned int irq); /* diff --git a/arch/tile/include/asm/mmu_context.h b/arch/tile/include/asm/mmu_context.h index 9bc0d0725c28..15fb24641120 100644 --- a/arch/tile/include/asm/mmu_context.h +++ b/arch/tile/include/asm/mmu_context.h @@ -100,8 +100,8 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, __get_cpu_var(current_asid) = asid; /* Clear cpu from the old mm, and set it in the new one. */ - cpumask_clear_cpu(cpu, &prev->cpu_vm_mask); - cpumask_set_cpu(cpu, &next->cpu_vm_mask); + cpumask_clear_cpu(cpu, mm_cpumask(prev)); + cpumask_set_cpu(cpu, mm_cpumask(next)); /* Re-load page tables */ install_page_table(next->pgd, asid); diff --git a/arch/tile/include/asm/opcode-tile_32.h b/arch/tile/include/asm/opcode-tile_32.h index eda60ecbae3d..03df7b1e77bf 100644 --- a/arch/tile/include/asm/opcode-tile_32.h +++ b/arch/tile/include/asm/opcode-tile_32.h @@ -1502,5 +1502,12 @@ extern int parse_insn_tile(tile_bundle_bits bits, decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]); +/* Given a set of bundle bits and a specific pipe, returns which + * instruction the bundle contains in that pipe. + */ +extern const struct tile_opcode * +find_opcode(tile_bundle_bits bits, tile_pipeline pipe); + + #endif /* opcode_tile_h */ diff --git a/arch/tile/include/asm/opcode-tile_64.h b/arch/tile/include/asm/opcode-tile_64.h index eda60ecbae3d..c0633466cd5c 100644 --- a/arch/tile/include/asm/opcode-tile_64.h +++ b/arch/tile/include/asm/opcode-tile_64.h @@ -5,863 +5,711 @@ #ifndef opcode_tile_h #define opcode_tile_h -typedef unsigned long long tile_bundle_bits; +typedef unsigned long long tilegx_bundle_bits; enum { - TILE_MAX_OPERANDS = 5 /* mm */ + TILEGX_MAX_OPERANDS = 4 /* bfexts */ }; typedef enum { - TILE_OPC_BPT, - TILE_OPC_INFO, - TILE_OPC_INFOL, - TILE_OPC_J, - TILE_OPC_JAL, - TILE_OPC_MOVE, - TILE_OPC_MOVE_SN, - TILE_OPC_MOVEI, - TILE_OPC_MOVEI_SN, - TILE_OPC_MOVELI, - TILE_OPC_MOVELI_SN, - TILE_OPC_MOVELIS, - TILE_OPC_PREFETCH, - TILE_OPC_RAISE, - TILE_OPC_ADD, - TILE_OPC_ADD_SN, - TILE_OPC_ADDB, - TILE_OPC_ADDB_SN, - TILE_OPC_ADDBS_U, - TILE_OPC_ADDBS_U_SN, - TILE_OPC_ADDH, - TILE_OPC_ADDH_SN, - TILE_OPC_ADDHS, - TILE_OPC_ADDHS_SN, - TILE_OPC_ADDI, - TILE_OPC_ADDI_SN, - TILE_OPC_ADDIB, - TILE_OPC_ADDIB_SN, - TILE_OPC_ADDIH, - TILE_OPC_ADDIH_SN, - TILE_OPC_ADDLI, - TILE_OPC_ADDLI_SN, - TILE_OPC_ADDLIS, - TILE_OPC_ADDS, - TILE_OPC_ADDS_SN, - TILE_OPC_ADIFFB_U, - TILE_OPC_ADIFFB_U_SN, - TILE_OPC_ADIFFH, - TILE_OPC_ADIFFH_SN, - TILE_OPC_AND, - TILE_OPC_AND_SN, - TILE_OPC_ANDI, - TILE_OPC_ANDI_SN, - TILE_OPC_AULI, - TILE_OPC_AVGB_U, - TILE_OPC_AVGB_U_SN, - TILE_OPC_AVGH, - TILE_OPC_AVGH_SN, - TILE_OPC_BBNS, - TILE_OPC_BBNS_SN, - TILE_OPC_BBNST, - TILE_OPC_BBNST_SN, - TILE_OPC_BBS, - TILE_OPC_BBS_SN, - TILE_OPC_BBST, - TILE_OPC_BBST_SN, - TILE_OPC_BGEZ, - TILE_OPC_BGEZ_SN, - TILE_OPC_BGEZT, - TILE_OPC_BGEZT_SN, - TILE_OPC_BGZ, - TILE_OPC_BGZ_SN, - TILE_OPC_BGZT, - TILE_OPC_BGZT_SN, - TILE_OPC_BITX, - TILE_OPC_BITX_SN, - TILE_OPC_BLEZ, - TILE_OPC_BLEZ_SN, - TILE_OPC_BLEZT, - TILE_OPC_BLEZT_SN, - TILE_OPC_BLZ, - TILE_OPC_BLZ_SN, - TILE_OPC_BLZT, - TILE_OPC_BLZT_SN, - TILE_OPC_BNZ, - TILE_OPC_BNZ_SN, - TILE_OPC_BNZT, - TILE_OPC_BNZT_SN, - TILE_OPC_BYTEX, - TILE_OPC_BYTEX_SN, - TILE_OPC_BZ, - TILE_OPC_BZ_SN, - TILE_OPC_BZT, - TILE_OPC_BZT_SN, - TILE_OPC_CLZ, - TILE_OPC_CLZ_SN, - TILE_OPC_CRC32_32, - TILE_OPC_CRC32_32_SN, - TILE_OPC_CRC32_8, - TILE_OPC_CRC32_8_SN, - TILE_OPC_CTZ, - TILE_OPC_CTZ_SN, - TILE_OPC_DRAIN, - TILE_OPC_DTLBPR, - TILE_OPC_DWORD_ALIGN, - TILE_OPC_DWORD_ALIGN_SN, - TILE_OPC_FINV, - TILE_OPC_FLUSH, - TILE_OPC_FNOP, - TILE_OPC_ICOH, - TILE_OPC_ILL, - TILE_OPC_INTHB, - TILE_OPC_INTHB_SN, - TILE_OPC_INTHH, - TILE_OPC_INTHH_SN, - TILE_OPC_INTLB, - TILE_OPC_INTLB_SN, - TILE_OPC_INTLH, - TILE_OPC_INTLH_SN, - TILE_OPC_INV, - TILE_OPC_IRET, - TILE_OPC_JALB, - TILE_OPC_JALF, - TILE_OPC_JALR, - TILE_OPC_JALRP, - TILE_OPC_JB, - TILE_OPC_JF, - TILE_OPC_JR, - TILE_OPC_JRP, - TILE_OPC_LB, - TILE_OPC_LB_SN, - TILE_OPC_LB_U, - TILE_OPC_LB_U_SN, - TILE_OPC_LBADD, - TILE_OPC_LBADD_SN, - TILE_OPC_LBADD_U, - TILE_OPC_LBADD_U_SN, - TILE_OPC_LH, - TILE_OPC_LH_SN, - TILE_OPC_LH_U, - TILE_OPC_LH_U_SN, - TILE_OPC_LHADD, - TILE_OPC_LHADD_SN, - TILE_OPC_LHADD_U, - TILE_OPC_LHADD_U_SN, - TILE_OPC_LNK, - TILE_OPC_LNK_SN, - TILE_OPC_LW, - TILE_OPC_LW_SN, - TILE_OPC_LW_NA, - TILE_OPC_LW_NA_SN, - TILE_OPC_LWADD, - TILE_OPC_LWADD_SN, - TILE_OPC_LWADD_NA, - TILE_OPC_LWADD_NA_SN, - TILE_OPC_MAXB_U, - TILE_OPC_MAXB_U_SN, - TILE_OPC_MAXH, - TILE_OPC_MAXH_SN, - TILE_OPC_MAXIB_U, - TILE_OPC_MAXIB_U_SN, - TILE_OPC_MAXIH, - TILE_OPC_MAXIH_SN, - TILE_OPC_MF, - TILE_OPC_MFSPR, - TILE_OPC_MINB_U, - TILE_OPC_MINB_U_SN, - TILE_OPC_MINH, - TILE_OPC_MINH_SN, - TILE_OPC_MINIB_U, - TILE_OPC_MINIB_U_SN, - TILE_OPC_MINIH, - TILE_OPC_MINIH_SN, - TILE_OPC_MM, - TILE_OPC_MNZ, - TILE_OPC_MNZ_SN, - TILE_OPC_MNZB, - TILE_OPC_MNZB_SN, - TILE_OPC_MNZH, - TILE_OPC_MNZH_SN, - TILE_OPC_MTSPR, - TILE_OPC_MULHH_SS, - TILE_OPC_MULHH_SS_SN, - TILE_OPC_MULHH_SU, - TILE_OPC_MULHH_SU_SN, - TILE_OPC_MULHH_UU, - TILE_OPC_MULHH_UU_SN, - TILE_OPC_MULHHA_SS, - TILE_OPC_MULHHA_SS_SN, - TILE_OPC_MULHHA_SU, - TILE_OPC_MULHHA_SU_SN, - TILE_OPC_MULHHA_UU, - TILE_OPC_MULHHA_UU_SN, - TILE_OPC_MULHHSA_UU, - TILE_OPC_MULHHSA_UU_SN, - TILE_OPC_MULHL_SS, - TILE_OPC_MULHL_SS_SN, - TILE_OPC_MULHL_SU, - TILE_OPC_MULHL_SU_SN, - TILE_OPC_MULHL_US, - TILE_OPC_MULHL_US_SN, - TILE_OPC_MULHL_UU, - TILE_OPC_MULHL_UU_SN, - TILE_OPC_MULHLA_SS, - TILE_OPC_MULHLA_SS_SN, - TILE_OPC_MULHLA_SU, - TILE_OPC_MULHLA_SU_SN, - TILE_OPC_MULHLA_US, - TILE_OPC_MULHLA_US_SN, - TILE_OPC_MULHLA_UU, - TILE_OPC_MULHLA_UU_SN, - TILE_OPC_MULHLSA_UU, - TILE_OPC_MULHLSA_UU_SN, - TILE_OPC_MULLL_SS, - TILE_OPC_MULLL_SS_SN, - TILE_OPC_MULLL_SU, - TILE_OPC_MULLL_SU_SN, - TILE_OPC_MULLL_UU, - TILE_OPC_MULLL_UU_SN, - TILE_OPC_MULLLA_SS, - TILE_OPC_MULLLA_SS_SN, - TILE_OPC_MULLLA_SU, - TILE_OPC_MULLLA_SU_SN, - TILE_OPC_MULLLA_UU, - TILE_OPC_MULLLA_UU_SN, - TILE_OPC_MULLLSA_UU, - TILE_OPC_MULLLSA_UU_SN, - TILE_OPC_MVNZ, - TILE_OPC_MVNZ_SN, - TILE_OPC_MVZ, - TILE_OPC_MVZ_SN, - TILE_OPC_MZ, - TILE_OPC_MZ_SN, - TILE_OPC_MZB, - TILE_OPC_MZB_SN, - TILE_OPC_MZH, - TILE_OPC_MZH_SN, - TILE_OPC_NAP, - TILE_OPC_NOP, - TILE_OPC_NOR, - TILE_OPC_NOR_SN, - TILE_OPC_OR, - TILE_OPC_OR_SN, - TILE_OPC_ORI, - TILE_OPC_ORI_SN, - TILE_OPC_PACKBS_U, - TILE_OPC_PACKBS_U_SN, - TILE_OPC_PACKHB, - TILE_OPC_PACKHB_SN, - TILE_OPC_PACKHS, - TILE_OPC_PACKHS_SN, - TILE_OPC_PACKLB, - TILE_OPC_PACKLB_SN, - TILE_OPC_PCNT, - TILE_OPC_PCNT_SN, - TILE_OPC_RL, - TILE_OPC_RL_SN, - TILE_OPC_RLI, - TILE_OPC_RLI_SN, - TILE_OPC_S1A, - TILE_OPC_S1A_SN, - TILE_OPC_S2A, - TILE_OPC_S2A_SN, - TILE_OPC_S3A, - TILE_OPC_S3A_SN, - TILE_OPC_SADAB_U, - TILE_OPC_SADAB_U_SN, - TILE_OPC_SADAH, - TILE_OPC_SADAH_SN, - TILE_OPC_SADAH_U, - TILE_OPC_SADAH_U_SN, - TILE_OPC_SADB_U, - TILE_OPC_SADB_U_SN, - TILE_OPC_SADH, - TILE_OPC_SADH_SN, - TILE_OPC_SADH_U, - TILE_OPC_SADH_U_SN, - TILE_OPC_SB, - TILE_OPC_SBADD, - TILE_OPC_SEQ, - TILE_OPC_SEQ_SN, - TILE_OPC_SEQB, - TILE_OPC_SEQB_SN, - TILE_OPC_SEQH, - TILE_OPC_SEQH_SN, - TILE_OPC_SEQI, - TILE_OPC_SEQI_SN, - TILE_OPC_SEQIB, - TILE_OPC_SEQIB_SN, - TILE_OPC_SEQIH, - TILE_OPC_SEQIH_SN, - TILE_OPC_SH, - TILE_OPC_SHADD, - TILE_OPC_SHL, - TILE_OPC_SHL_SN, - TILE_OPC_SHLB, - TILE_OPC_SHLB_SN, - TILE_OPC_SHLH, - TILE_OPC_SHLH_SN, - TILE_OPC_SHLI, - TILE_OPC_SHLI_SN, - TILE_OPC_SHLIB, - TILE_OPC_SHLIB_SN, - TILE_OPC_SHLIH, - TILE_OPC_SHLIH_SN, - TILE_OPC_SHR, - TILE_OPC_SHR_SN, - TILE_OPC_SHRB, - TILE_OPC_SHRB_SN, - TILE_OPC_SHRH, - TILE_OPC_SHRH_SN, - TILE_OPC_SHRI, - TILE_OPC_SHRI_SN, - TILE_OPC_SHRIB, - TILE_OPC_SHRIB_SN, - TILE_OPC_SHRIH, - TILE_OPC_SHRIH_SN, - TILE_OPC_SLT, - TILE_OPC_SLT_SN, - TILE_OPC_SLT_U, - TILE_OPC_SLT_U_SN, - TILE_OPC_SLTB, - TILE_OPC_SLTB_SN, - TILE_OPC_SLTB_U, - TILE_OPC_SLTB_U_SN, - TILE_OPC_SLTE, - TILE_OPC_SLTE_SN, - TILE_OPC_SLTE_U, - TILE_OPC_SLTE_U_SN, - TILE_OPC_SLTEB, - TILE_OPC_SLTEB_SN, - TILE_OPC_SLTEB_U, - TILE_OPC_SLTEB_U_SN, - TILE_OPC_SLTEH, - TILE_OPC_SLTEH_SN, - TILE_OPC_SLTEH_U, - TILE_OPC_SLTEH_U_SN, - TILE_OPC_SLTH, - TILE_OPC_SLTH_SN, - TILE_OPC_SLTH_U, - TILE_OPC_SLTH_U_SN, - TILE_OPC_SLTI, - TILE_OPC_SLTI_SN, - TILE_OPC_SLTI_U, - TILE_OPC_SLTI_U_SN, - TILE_OPC_SLTIB, - TILE_OPC_SLTIB_SN, - TILE_OPC_SLTIB_U, - TILE_OPC_SLTIB_U_SN, - TILE_OPC_SLTIH, - TILE_OPC_SLTIH_SN, - TILE_OPC_SLTIH_U, - TILE_OPC_SLTIH_U_SN, - TILE_OPC_SNE, - TILE_OPC_SNE_SN, - TILE_OPC_SNEB, - TILE_OPC_SNEB_SN, - TILE_OPC_SNEH, - TILE_OPC_SNEH_SN, - TILE_OPC_SRA, - TILE_OPC_SRA_SN, - TILE_OPC_SRAB, - TILE_OPC_SRAB_SN, - TILE_OPC_SRAH, - TILE_OPC_SRAH_SN, - TILE_OPC_SRAI, - TILE_OPC_SRAI_SN, - TILE_OPC_SRAIB, - TILE_OPC_SRAIB_SN, - TILE_OPC_SRAIH, - TILE_OPC_SRAIH_SN, - TILE_OPC_SUB, - TILE_OPC_SUB_SN, - TILE_OPC_SUBB, - TILE_OPC_SUBB_SN, - TILE_OPC_SUBBS_U, - TILE_OPC_SUBBS_U_SN, - TILE_OPC_SUBH, - TILE_OPC_SUBH_SN, - TILE_OPC_SUBHS, - TILE_OPC_SUBHS_SN, - TILE_OPC_SUBS, - TILE_OPC_SUBS_SN, - TILE_OPC_SW, - TILE_OPC_SWADD, - TILE_OPC_SWINT0, - TILE_OPC_SWINT1, - TILE_OPC_SWINT2, - TILE_OPC_SWINT3, - TILE_OPC_TBLIDXB0, - TILE_OPC_TBLIDXB0_SN, - TILE_OPC_TBLIDXB1, - TILE_OPC_TBLIDXB1_SN, - TILE_OPC_TBLIDXB2, - TILE_OPC_TBLIDXB2_SN, - TILE_OPC_TBLIDXB3, - TILE_OPC_TBLIDXB3_SN, - TILE_OPC_TNS, - TILE_OPC_TNS_SN, - TILE_OPC_WH64, - TILE_OPC_XOR, - TILE_OPC_XOR_SN, - TILE_OPC_XORI, - TILE_OPC_XORI_SN, - TILE_OPC_NONE -} tile_mnemonic; + TILEGX_OPC_BPT, + TILEGX_OPC_INFO, + TILEGX_OPC_INFOL, + TILEGX_OPC_MOVE, + TILEGX_OPC_MOVEI, + TILEGX_OPC_MOVELI, + TILEGX_OPC_PREFETCH, + TILEGX_OPC_PREFETCH_ADD_L1, + TILEGX_OPC_PREFETCH_ADD_L1_FAULT, + TILEGX_OPC_PREFETCH_ADD_L2, + TILEGX_OPC_PREFETCH_ADD_L2_FAULT, + TILEGX_OPC_PREFETCH_ADD_L3, + TILEGX_OPC_PREFETCH_ADD_L3_FAULT, + TILEGX_OPC_PREFETCH_L1, + TILEGX_OPC_PREFETCH_L1_FAULT, + TILEGX_OPC_PREFETCH_L2, + TILEGX_OPC_PREFETCH_L2_FAULT, + TILEGX_OPC_PREFETCH_L3, + TILEGX_OPC_PREFETCH_L3_FAULT, + TILEGX_OPC_RAISE, + TILEGX_OPC_ADD, + TILEGX_OPC_ADDI, + TILEGX_OPC_ADDLI, + TILEGX_OPC_ADDX, + TILEGX_OPC_ADDXI, + TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXSC, + TILEGX_OPC_AND, + TILEGX_OPC_ANDI, + TILEGX_OPC_BEQZ, + TILEGX_OPC_BEQZT, + TILEGX_OPC_BFEXTS, + TILEGX_OPC_BFEXTU, + TILEGX_OPC_BFINS, + TILEGX_OPC_BGEZ, + TILEGX_OPC_BGEZT, + TILEGX_OPC_BGTZ, + TILEGX_OPC_BGTZT, + TILEGX_OPC_BLBC, + TILEGX_OPC_BLBCT, + TILEGX_OPC_BLBS, + TILEGX_OPC_BLBST, + TILEGX_OPC_BLEZ, + TILEGX_OPC_BLEZT, + TILEGX_OPC_BLTZ, + TILEGX_OPC_BLTZT, + TILEGX_OPC_BNEZ, + TILEGX_OPC_BNEZT, + TILEGX_OPC_CLZ, + TILEGX_OPC_CMOVEQZ, + TILEGX_OPC_CMOVNEZ, + TILEGX_OPC_CMPEQ, + TILEGX_OPC_CMPEQI, + TILEGX_OPC_CMPEXCH, + TILEGX_OPC_CMPEXCH4, + TILEGX_OPC_CMPLES, + TILEGX_OPC_CMPLEU, + TILEGX_OPC_CMPLTS, + TILEGX_OPC_CMPLTSI, + TILEGX_OPC_CMPLTU, + TILEGX_OPC_CMPLTUI, + TILEGX_OPC_CMPNE, + TILEGX_OPC_CMUL, + TILEGX_OPC_CMULA, + TILEGX_OPC_CMULAF, + TILEGX_OPC_CMULF, + TILEGX_OPC_CMULFR, + TILEGX_OPC_CMULH, + TILEGX_OPC_CMULHR, + TILEGX_OPC_CRC32_32, + TILEGX_OPC_CRC32_8, + TILEGX_OPC_CTZ, + TILEGX_OPC_DBLALIGN, + TILEGX_OPC_DBLALIGN2, + TILEGX_OPC_DBLALIGN4, + TILEGX_OPC_DBLALIGN6, + TILEGX_OPC_DRAIN, + TILEGX_OPC_DTLBPR, + TILEGX_OPC_EXCH, + TILEGX_OPC_EXCH4, + TILEGX_OPC_FDOUBLE_ADD_FLAGS, + TILEGX_OPC_FDOUBLE_ADDSUB, + TILEGX_OPC_FDOUBLE_MUL_FLAGS, + TILEGX_OPC_FDOUBLE_PACK1, + TILEGX_OPC_FDOUBLE_PACK2, + TILEGX_OPC_FDOUBLE_SUB_FLAGS, + TILEGX_OPC_FDOUBLE_UNPACK_MAX, + TILEGX_OPC_FDOUBLE_UNPACK_MIN, + TILEGX_OPC_FETCHADD, + TILEGX_OPC_FETCHADD4, + TILEGX_OPC_FETCHADDGEZ, + TILEGX_OPC_FETCHADDGEZ4, + TILEGX_OPC_FETCHAND, + TILEGX_OPC_FETCHAND4, + TILEGX_OPC_FETCHOR, + TILEGX_OPC_FETCHOR4, + TILEGX_OPC_FINV, + TILEGX_OPC_FLUSH, + TILEGX_OPC_FLUSHWB, + TILEGX_OPC_FNOP, + TILEGX_OPC_FSINGLE_ADD1, + TILEGX_OPC_FSINGLE_ADDSUB2, + TILEGX_OPC_FSINGLE_MUL1, + TILEGX_OPC_FSINGLE_MUL2, + TILEGX_OPC_FSINGLE_PACK1, + TILEGX_OPC_FSINGLE_PACK2, + TILEGX_OPC_FSINGLE_SUB1, + TILEGX_OPC_ICOH, + TILEGX_OPC_ILL, + TILEGX_OPC_INV, + TILEGX_OPC_IRET, + TILEGX_OPC_J, + TILEGX_OPC_JAL, + TILEGX_OPC_JALR, + TILEGX_OPC_JALRP, + TILEGX_OPC_JR, + TILEGX_OPC_JRP, + TILEGX_OPC_LD, + TILEGX_OPC_LD1S, + TILEGX_OPC_LD1S_ADD, + TILEGX_OPC_LD1U, + TILEGX_OPC_LD1U_ADD, + TILEGX_OPC_LD2S, + TILEGX_OPC_LD2S_ADD, + TILEGX_OPC_LD2U, + TILEGX_OPC_LD2U_ADD, + TILEGX_OPC_LD4S, + TILEGX_OPC_LD4S_ADD, + TILEGX_OPC_LD4U, + TILEGX_OPC_LD4U_ADD, + TILEGX_OPC_LD_ADD, + TILEGX_OPC_LDNA, + TILEGX_OPC_LDNA_ADD, + TILEGX_OPC_LDNT, + TILEGX_OPC_LDNT1S, + TILEGX_OPC_LDNT1S_ADD, + TILEGX_OPC_LDNT1U, + TILEGX_OPC_LDNT1U_ADD, + TILEGX_OPC_LDNT2S, + TILEGX_OPC_LDNT2S_ADD, + TILEGX_OPC_LDNT2U, + TILEGX_OPC_LDNT2U_ADD, + TILEGX_OPC_LDNT4S, + TILEGX_OPC_LDNT4S_ADD, + TILEGX_OPC_LDNT4U, + TILEGX_OPC_LDNT4U_ADD, + TILEGX_OPC_LDNT_ADD, + TILEGX_OPC_LNK, + TILEGX_OPC_MF, + TILEGX_OPC_MFSPR, + TILEGX_OPC_MM, + TILEGX_OPC_MNZ, + TILEGX_OPC_MTSPR, + TILEGX_OPC_MUL_HS_HS, + TILEGX_OPC_MUL_HS_HU, + TILEGX_OPC_MUL_HS_LS, + TILEGX_OPC_MUL_HS_LU, + TILEGX_OPC_MUL_HU_HU, + TILEGX_OPC_MUL_HU_LS, + TILEGX_OPC_MUL_HU_LU, + TILEGX_OPC_MUL_LS_LS, + TILEGX_OPC_MUL_LS_LU, + TILEGX_OPC_MUL_LU_LU, + TILEGX_OPC_MULA_HS_HS, + TILEGX_OPC_MULA_HS_HU, + TILEGX_OPC_MULA_HS_LS, + TILEGX_OPC_MULA_HS_LU, + TILEGX_OPC_MULA_HU_HU, + TILEGX_OPC_MULA_HU_LS, + TILEGX_OPC_MULA_HU_LU, + TILEGX_OPC_MULA_LS_LS, + TILEGX_OPC_MULA_LS_LU, + TILEGX_OPC_MULA_LU_LU, + TILEGX_OPC_MULAX, + TILEGX_OPC_MULX, + TILEGX_OPC_MZ, + TILEGX_OPC_NAP, + TILEGX_OPC_NOP, + TILEGX_OPC_NOR, + TILEGX_OPC_OR, + TILEGX_OPC_ORI, + TILEGX_OPC_PCNT, + TILEGX_OPC_REVBITS, + TILEGX_OPC_REVBYTES, + TILEGX_OPC_ROTL, + TILEGX_OPC_ROTLI, + TILEGX_OPC_SHL, + TILEGX_OPC_SHL16INSLI, + TILEGX_OPC_SHL1ADD, + TILEGX_OPC_SHL1ADDX, + TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL2ADDX, + TILEGX_OPC_SHL3ADD, + TILEGX_OPC_SHL3ADDX, + TILEGX_OPC_SHLI, + TILEGX_OPC_SHLX, + TILEGX_OPC_SHLXI, + TILEGX_OPC_SHRS, + TILEGX_OPC_SHRSI, + TILEGX_OPC_SHRU, + TILEGX_OPC_SHRUI, + TILEGX_OPC_SHRUX, + TILEGX_OPC_SHRUXI, + TILEGX_OPC_SHUFFLEBYTES, + TILEGX_OPC_ST, + TILEGX_OPC_ST1, + TILEGX_OPC_ST1_ADD, + TILEGX_OPC_ST2, + TILEGX_OPC_ST2_ADD, + TILEGX_OPC_ST4, + TILEGX_OPC_ST4_ADD, + TILEGX_OPC_ST_ADD, + TILEGX_OPC_STNT, + TILEGX_OPC_STNT1, + TILEGX_OPC_STNT1_ADD, + TILEGX_OPC_STNT2, + TILEGX_OPC_STNT2_ADD, + TILEGX_OPC_STNT4, + TILEGX_OPC_STNT4_ADD, + TILEGX_OPC_STNT_ADD, + TILEGX_OPC_SUB, + TILEGX_OPC_SUBX, + TILEGX_OPC_SUBXSC, + TILEGX_OPC_SWINT0, + TILEGX_OPC_SWINT1, + TILEGX_OPC_SWINT2, + TILEGX_OPC_SWINT3, + TILEGX_OPC_TBLIDXB0, + TILEGX_OPC_TBLIDXB1, + TILEGX_OPC_TBLIDXB2, + TILEGX_OPC_TBLIDXB3, + TILEGX_OPC_V1ADD, + TILEGX_OPC_V1ADDI, + TILEGX_OPC_V1ADDUC, + TILEGX_OPC_V1ADIFFU, + TILEGX_OPC_V1AVGU, + TILEGX_OPC_V1CMPEQ, + TILEGX_OPC_V1CMPEQI, + TILEGX_OPC_V1CMPLES, + TILEGX_OPC_V1CMPLEU, + TILEGX_OPC_V1CMPLTS, + TILEGX_OPC_V1CMPLTSI, + TILEGX_OPC_V1CMPLTU, + TILEGX_OPC_V1CMPLTUI, + TILEGX_OPC_V1CMPNE, + TILEGX_OPC_V1DDOTPU, + TILEGX_OPC_V1DDOTPUA, + TILEGX_OPC_V1DDOTPUS, + TILEGX_OPC_V1DDOTPUSA, + TILEGX_OPC_V1DOTP, + TILEGX_OPC_V1DOTPA, + TILEGX_OPC_V1DOTPU, + TILEGX_OPC_V1DOTPUA, + TILEGX_OPC_V1DOTPUS, + TILEGX_OPC_V1DOTPUSA, + TILEGX_OPC_V1INT_H, + TILEGX_OPC_V1INT_L, + TILEGX_OPC_V1MAXU, + TILEGX_OPC_V1MAXUI, + TILEGX_OPC_V1MINU, + TILEGX_OPC_V1MINUI, + TILEGX_OPC_V1MNZ, + TILEGX_OPC_V1MULTU, + TILEGX_OPC_V1MULU, + TILEGX_OPC_V1MULUS, + TILEGX_OPC_V1MZ, + TILEGX_OPC_V1SADAU, + TILEGX_OPC_V1SADU, + TILEGX_OPC_V1SHL, + TILEGX_OPC_V1SHLI, + TILEGX_OPC_V1SHRS, + TILEGX_OPC_V1SHRSI, + TILEGX_OPC_V1SHRU, + TILEGX_OPC_V1SHRUI, + TILEGX_OPC_V1SUB, + TILEGX_OPC_V1SUBUC, + TILEGX_OPC_V2ADD, + TILEGX_OPC_V2ADDI, + TILEGX_OPC_V2ADDSC, + TILEGX_OPC_V2ADIFFS, + TILEGX_OPC_V2AVGS, + TILEGX_OPC_V2CMPEQ, + TILEGX_OPC_V2CMPEQI, + TILEGX_OPC_V2CMPLES, + TILEGX_OPC_V2CMPLEU, + TILEGX_OPC_V2CMPLTS, + TILEGX_OPC_V2CMPLTSI, + TILEGX_OPC_V2CMPLTU, + TILEGX_OPC_V2CMPLTUI, + TILEGX_OPC_V2CMPNE, + TILEGX_OPC_V2DOTP, + TILEGX_OPC_V2DOTPA, + TILEGX_OPC_V2INT_H, + TILEGX_OPC_V2INT_L, + TILEGX_OPC_V2MAXS, + TILEGX_OPC_V2MAXSI, + TILEGX_OPC_V2MINS, + TILEGX_OPC_V2MINSI, + TILEGX_OPC_V2MNZ, + TILEGX_OPC_V2MULFSC, + TILEGX_OPC_V2MULS, + TILEGX_OPC_V2MULTS, + TILEGX_OPC_V2MZ, + TILEGX_OPC_V2PACKH, + TILEGX_OPC_V2PACKL, + TILEGX_OPC_V2PACKUC, + TILEGX_OPC_V2SADAS, + TILEGX_OPC_V2SADAU, + TILEGX_OPC_V2SADS, + TILEGX_OPC_V2SADU, + TILEGX_OPC_V2SHL, + TILEGX_OPC_V2SHLI, + TILEGX_OPC_V2SHLSC, + TILEGX_OPC_V2SHRS, + TILEGX_OPC_V2SHRSI, + TILEGX_OPC_V2SHRU, + TILEGX_OPC_V2SHRUI, + TILEGX_OPC_V2SUB, + TILEGX_OPC_V2SUBSC, + TILEGX_OPC_V4ADD, + TILEGX_OPC_V4ADDSC, + TILEGX_OPC_V4INT_H, + TILEGX_OPC_V4INT_L, + TILEGX_OPC_V4PACKSC, + TILEGX_OPC_V4SHL, + TILEGX_OPC_V4SHLSC, + TILEGX_OPC_V4SHRS, + TILEGX_OPC_V4SHRU, + TILEGX_OPC_V4SUB, + TILEGX_OPC_V4SUBSC, + TILEGX_OPC_WH64, + TILEGX_OPC_XOR, + TILEGX_OPC_XORI, + TILEGX_OPC_NONE +} tilegx_mnemonic; /* 64-bit pattern for a { bpt ; nop } bundle. */ -#define TILE_BPT_BUNDLE 0x400b3cae70166000ULL +#define TILEGX_BPT_BUNDLE 0x286a44ae51485000ULL -#define TILE_ELF_MACHINE_CODE EM_TILEPRO +#define TILE_ELF_MACHINE_CODE EM_TILE64 -#define TILE_ELF_NAME "elf32-tilepro" +#define TILE_ELF_NAME "elf32-tile64" static __inline unsigned int -get_BrOff_SN(tile_bundle_bits num) +get_BFEnd_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3ff); + return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_BrOff_X1(tile_bundle_bits n) +get_BFOpcodeExtension_X0(tilegx_bundle_bits num) { - return (((unsigned int)(n >> 43)) & 0x00007fff) | - (((unsigned int)(n >> 20)) & 0x00018000); + const unsigned int n = (unsigned int)num; + return (((n >> 24)) & 0xf); } static __inline unsigned int -get_BrType_X1(tile_bundle_bits n) +get_BFStart_X0(tilegx_bundle_bits num) { - return (((unsigned int)(n >> 31)) & 0xf); + const unsigned int n = (unsigned int)num; + return (((n >> 18)) & 0x3f); } static __inline unsigned int -get_Dest_Imm8_X1(tile_bundle_bits n) +get_BrOff_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 43)) & 0x000000c0); + (((unsigned int)(n >> 37)) & 0x0001ffc0); } static __inline unsigned int -get_Dest_SN(tile_bundle_bits num) +get_BrType_X1(tilegx_bundle_bits n) { - const unsigned int n = (unsigned int)num; - return (((n >> 2)) & 0x3); + return (((unsigned int)(n >> 54)) & 0x1f); } static __inline unsigned int -get_Dest_X0(tile_bundle_bits num) +get_Dest_Imm8_X1(tilegx_bundle_bits n) +{ + return (((unsigned int)(n >> 31)) & 0x0000003f) | + (((unsigned int)(n >> 43)) & 0x000000c0); +} + +static __inline unsigned int +get_Dest_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 0)) & 0x3f); } static __inline unsigned int -get_Dest_X1(tile_bundle_bits n) +get_Dest_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 31)) & 0x3f); } static __inline unsigned int -get_Dest_Y0(tile_bundle_bits num) +get_Dest_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 0)) & 0x3f); } static __inline unsigned int -get_Dest_Y1(tile_bundle_bits n) +get_Dest_Y1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 31)) & 0x3f); } static __inline unsigned int -get_Imm16_X0(tile_bundle_bits num) +get_Imm16_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 12)) & 0xffff); } static __inline unsigned int -get_Imm16_X1(tile_bundle_bits n) +get_Imm16_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 43)) & 0xffff); } static __inline unsigned int -get_Imm8_SN(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0xff); -} - -static __inline unsigned int -get_Imm8_X0(tile_bundle_bits num) +get_Imm8OpcodeExtension_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0xff); + return (((n >> 20)) & 0xff); } static __inline unsigned int -get_Imm8_X1(tile_bundle_bits n) +get_Imm8OpcodeExtension_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 43)) & 0xff); + return (((unsigned int)(n >> 51)) & 0xff); } static __inline unsigned int -get_Imm8_Y0(tile_bundle_bits num) +get_Imm8_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 12)) & 0xff); } static __inline unsigned int -get_Imm8_Y1(tile_bundle_bits n) +get_Imm8_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 43)) & 0xff); } static __inline unsigned int -get_ImmOpcodeExtension_X0(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 20)) & 0x7f); -} - -static __inline unsigned int -get_ImmOpcodeExtension_X1(tile_bundle_bits n) -{ - return (((unsigned int)(n >> 51)) & 0x7f); -} - -static __inline unsigned int -get_ImmRROpcodeExtension_SN(tile_bundle_bits num) +get_Imm8_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 8)) & 0x3); -} - -static __inline unsigned int -get_JOffLong_X1(tile_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x00007fff) | - (((unsigned int)(n >> 20)) & 0x00018000) | - (((unsigned int)(n >> 14)) & 0x001e0000) | - (((unsigned int)(n >> 16)) & 0x07e00000) | - (((unsigned int)(n >> 31)) & 0x18000000); -} - -static __inline unsigned int -get_JOff_X1(tile_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x00007fff) | - (((unsigned int)(n >> 20)) & 0x00018000) | - (((unsigned int)(n >> 14)) & 0x001e0000) | - (((unsigned int)(n >> 16)) & 0x07e00000) | - (((unsigned int)(n >> 31)) & 0x08000000); -} - -static __inline unsigned int -get_MF_Imm15_X1(tile_bundle_bits n) -{ - return (((unsigned int)(n >> 37)) & 0x00003fff) | - (((unsigned int)(n >> 44)) & 0x00004000); + return (((n >> 12)) & 0xff); } static __inline unsigned int -get_MMEnd_X0(tile_bundle_bits num) +get_Imm8_Y1(tilegx_bundle_bits n) { - const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x1f); + return (((unsigned int)(n >> 43)) & 0xff); } static __inline unsigned int -get_MMEnd_X1(tile_bundle_bits n) +get_JumpOff_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 49)) & 0x1f); + return (((unsigned int)(n >> 31)) & 0x7ffffff); } static __inline unsigned int -get_MMStart_X0(tile_bundle_bits num) +get_JumpOpcodeExtension_X1(tilegx_bundle_bits n) { - const unsigned int n = (unsigned int)num; - return (((n >> 23)) & 0x1f); + return (((unsigned int)(n >> 58)) & 0x1); } static __inline unsigned int -get_MMStart_X1(tile_bundle_bits n) +get_MF_Imm14_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 54)) & 0x1f); + return (((unsigned int)(n >> 37)) & 0x3fff); } static __inline unsigned int -get_MT_Imm15_X1(tile_bundle_bits n) +get_MT_Imm14_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 31)) & 0x0000003f) | - (((unsigned int)(n >> 37)) & 0x00003fc0) | - (((unsigned int)(n >> 44)) & 0x00004000); + (((unsigned int)(n >> 37)) & 0x00003fc0); } static __inline unsigned int -get_Mode(tile_bundle_bits n) +get_Mode(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 63)) & 0x1); + return (((unsigned int)(n >> 62)) & 0x3); } static __inline unsigned int -get_NoRegOpcodeExtension_SN(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0xf); -} - -static __inline unsigned int -get_Opcode_SN(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 10)) & 0x3f); -} - -static __inline unsigned int -get_Opcode_X0(tile_bundle_bits num) +get_Opcode_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 28)) & 0x7); } static __inline unsigned int -get_Opcode_X1(tile_bundle_bits n) +get_Opcode_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 59)) & 0xf); + return (((unsigned int)(n >> 59)) & 0x7); } static __inline unsigned int -get_Opcode_Y0(tile_bundle_bits num) +get_Opcode_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 27)) & 0xf); } static __inline unsigned int -get_Opcode_Y1(tile_bundle_bits n) +get_Opcode_Y1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 59)) & 0xf); + return (((unsigned int)(n >> 58)) & 0xf); } static __inline unsigned int -get_Opcode_Y2(tile_bundle_bits n) +get_Opcode_Y2(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 56)) & 0x7); -} - -static __inline unsigned int -get_RROpcodeExtension_SN(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 4)) & 0xf); + return (((n >> 26)) & 0x00000001) | + (((unsigned int)(n >> 56)) & 0x00000002); } static __inline unsigned int -get_RRROpcodeExtension_X0(tile_bundle_bits num) +get_RRROpcodeExtension_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 18)) & 0x1ff); + return (((n >> 18)) & 0x3ff); } static __inline unsigned int -get_RRROpcodeExtension_X1(tile_bundle_bits n) +get_RRROpcodeExtension_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 49)) & 0x1ff); + return (((unsigned int)(n >> 49)) & 0x3ff); } static __inline unsigned int -get_RRROpcodeExtension_Y0(tile_bundle_bits num) +get_RRROpcodeExtension_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 18)) & 0x3); } static __inline unsigned int -get_RRROpcodeExtension_Y1(tile_bundle_bits n) +get_RRROpcodeExtension_Y1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 49)) & 0x3); } static __inline unsigned int -get_RouteOpcodeExtension_SN(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3ff); -} - -static __inline unsigned int -get_S_X0(tile_bundle_bits num) +get_ShAmt_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 27)) & 0x1); + return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_S_X1(tile_bundle_bits n) +get_ShAmt_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 58)) & 0x1); + return (((unsigned int)(n >> 43)) & 0x3f); } static __inline unsigned int -get_ShAmt_X0(tile_bundle_bits num) +get_ShAmt_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); + return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_ShAmt_X1(tile_bundle_bits n) +get_ShAmt_Y1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 43)) & 0x1f); + return (((unsigned int)(n >> 43)) & 0x3f); } static __inline unsigned int -get_ShAmt_Y0(tile_bundle_bits num) +get_ShiftOpcodeExtension_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); + return (((n >> 18)) & 0x3ff); } static __inline unsigned int -get_ShAmt_Y1(tile_bundle_bits n) +get_ShiftOpcodeExtension_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 43)) & 0x1f); + return (((unsigned int)(n >> 49)) & 0x3ff); } static __inline unsigned int -get_SrcA_X0(tile_bundle_bits num) +get_ShiftOpcodeExtension_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 6)) & 0x3f); + return (((n >> 18)) & 0x3); } static __inline unsigned int -get_SrcA_X1(tile_bundle_bits n) +get_ShiftOpcodeExtension_Y1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 37)) & 0x3f); + return (((unsigned int)(n >> 49)) & 0x3); } static __inline unsigned int -get_SrcA_Y0(tile_bundle_bits num) +get_SrcA_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 6)) & 0x3f); } static __inline unsigned int -get_SrcA_Y1(tile_bundle_bits n) +get_SrcA_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 37)) & 0x3f); } static __inline unsigned int -get_SrcA_Y2(tile_bundle_bits n) +get_SrcA_Y0(tilegx_bundle_bits num) { - return (((n >> 26)) & 0x00000001) | - (((unsigned int)(n >> 50)) & 0x0000003e); + const unsigned int n = (unsigned int)num; + return (((n >> 6)) & 0x3f); } static __inline unsigned int -get_SrcBDest_Y2(tile_bundle_bits num) +get_SrcA_Y1(tilegx_bundle_bits n) { - const unsigned int n = (unsigned int)num; - return (((n >> 20)) & 0x3f); + return (((unsigned int)(n >> 37)) & 0x3f); } static __inline unsigned int -get_SrcB_X0(tile_bundle_bits num) +get_SrcA_Y2(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x3f); + return (((n >> 20)) & 0x3f); } static __inline unsigned int -get_SrcB_X1(tile_bundle_bits n) +get_SrcBDest_Y2(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 43)) & 0x3f); + return (((unsigned int)(n >> 51)) & 0x3f); } static __inline unsigned int -get_SrcB_Y0(tile_bundle_bits num) +get_SrcB_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_SrcB_Y1(tile_bundle_bits n) +get_SrcB_X1(tilegx_bundle_bits n) { return (((unsigned int)(n >> 43)) & 0x3f); } static __inline unsigned int -get_Src_SN(tile_bundle_bits num) +get_SrcB_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 0)) & 0x3); -} - -static __inline unsigned int -get_UnOpcodeExtension_X0(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); -} - -static __inline unsigned int -get_UnOpcodeExtension_X1(tile_bundle_bits n) -{ - return (((unsigned int)(n >> 43)) & 0x1f); -} - -static __inline unsigned int -get_UnOpcodeExtension_Y0(tile_bundle_bits num) -{ - const unsigned int n = (unsigned int)num; - return (((n >> 12)) & 0x1f); + return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_UnOpcodeExtension_Y1(tile_bundle_bits n) +get_SrcB_Y1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 43)) & 0x1f); + return (((unsigned int)(n >> 43)) & 0x3f); } static __inline unsigned int -get_UnShOpcodeExtension_X0(tile_bundle_bits num) +get_UnaryOpcodeExtension_X0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 17)) & 0x3ff); + return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_UnShOpcodeExtension_X1(tile_bundle_bits n) +get_UnaryOpcodeExtension_X1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 48)) & 0x3ff); + return (((unsigned int)(n >> 43)) & 0x3f); } static __inline unsigned int -get_UnShOpcodeExtension_Y0(tile_bundle_bits num) +get_UnaryOpcodeExtension_Y0(tilegx_bundle_bits num) { const unsigned int n = (unsigned int)num; - return (((n >> 17)) & 0x7); + return (((n >> 12)) & 0x3f); } static __inline unsigned int -get_UnShOpcodeExtension_Y1(tile_bundle_bits n) +get_UnaryOpcodeExtension_Y1(tilegx_bundle_bits n) { - return (((unsigned int)(n >> 48)) & 0x7); + return (((unsigned int)(n >> 43)) & 0x3f); } @@ -874,546 +722,441 @@ sign_extend(int n, int num_bits) -static __inline tile_bundle_bits -create_BrOff_SN(int num) +static __inline tilegx_bundle_bits +create_BFEnd_X0(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 0); + return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits -create_BrOff_X1(int num) +static __inline tilegx_bundle_bits +create_BFOpcodeExtension_X0(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x00007fff)) << 43) | - (((tile_bundle_bits)(n & 0x00018000)) << 20); + return ((n & 0xf) << 24); } -static __inline tile_bundle_bits -create_BrType_X1(int num) +static __inline tilegx_bundle_bits +create_BFStart_X0(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0xf)) << 31); + return ((n & 0x3f) << 18); } -static __inline tile_bundle_bits -create_Dest_Imm8_X1(int num) +static __inline tilegx_bundle_bits +create_BrOff_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x0000003f)) << 31) | - (((tile_bundle_bits)(n & 0x000000c0)) << 43); + return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) | + (((tilegx_bundle_bits)(n & 0x0001ffc0)) << 37); } -static __inline tile_bundle_bits -create_Dest_SN(int num) +static __inline tilegx_bundle_bits +create_BrType_X1(int num) +{ + const unsigned int n = (unsigned int)num; + return (((tilegx_bundle_bits)(n & 0x1f)) << 54); +} + +static __inline tilegx_bundle_bits +create_Dest_Imm8_X1(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 2); + return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) | + (((tilegx_bundle_bits)(n & 0x000000c0)) << 43); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Dest_X0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3f) << 0); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Dest_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3f)) << 31); + return (((tilegx_bundle_bits)(n & 0x3f)) << 31); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Dest_Y0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3f) << 0); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Dest_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3f)) << 31); + return (((tilegx_bundle_bits)(n & 0x3f)) << 31); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Imm16_X0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0xffff) << 12); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Imm16_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0xffff)) << 43); + return (((tilegx_bundle_bits)(n & 0xffff)) << 43); } -static __inline tile_bundle_bits -create_Imm8_SN(int num) +static __inline tilegx_bundle_bits +create_Imm8OpcodeExtension_X0(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0xff) << 0); + return ((n & 0xff) << 20); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits +create_Imm8OpcodeExtension_X1(int num) +{ + const unsigned int n = (unsigned int)num; + return (((tilegx_bundle_bits)(n & 0xff)) << 51); +} + +static __inline tilegx_bundle_bits create_Imm8_X0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0xff) << 12); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Imm8_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0xff)) << 43); + return (((tilegx_bundle_bits)(n & 0xff)) << 43); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Imm8_Y0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0xff) << 12); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Imm8_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0xff)) << 43); -} - -static __inline tile_bundle_bits -create_ImmOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x7f) << 20); -} - -static __inline tile_bundle_bits -create_ImmOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x7f)) << 51); -} - -static __inline tile_bundle_bits -create_ImmRROpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 8); -} - -static __inline tile_bundle_bits -create_JOffLong_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x00007fff)) << 43) | - (((tile_bundle_bits)(n & 0x00018000)) << 20) | - (((tile_bundle_bits)(n & 0x001e0000)) << 14) | - (((tile_bundle_bits)(n & 0x07e00000)) << 16) | - (((tile_bundle_bits)(n & 0x18000000)) << 31); -} - -static __inline tile_bundle_bits -create_JOff_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x00007fff)) << 43) | - (((tile_bundle_bits)(n & 0x00018000)) << 20) | - (((tile_bundle_bits)(n & 0x001e0000)) << 14) | - (((tile_bundle_bits)(n & 0x07e00000)) << 16) | - (((tile_bundle_bits)(n & 0x08000000)) << 31); -} - -static __inline tile_bundle_bits -create_MF_Imm15_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x00003fff)) << 37) | - (((tile_bundle_bits)(n & 0x00004000)) << 44); + return (((tilegx_bundle_bits)(n & 0xff)) << 43); } -static __inline tile_bundle_bits -create_MMEnd_X0(int num) +static __inline tilegx_bundle_bits +create_JumpOff_X1(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 18); + return (((tilegx_bundle_bits)(n & 0x7ffffff)) << 31); } -static __inline tile_bundle_bits -create_MMEnd_X1(int num) +static __inline tilegx_bundle_bits +create_JumpOpcodeExtension_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1f)) << 49); + return (((tilegx_bundle_bits)(n & 0x1)) << 58); } -static __inline tile_bundle_bits -create_MMStart_X0(int num) +static __inline tilegx_bundle_bits +create_MF_Imm14_X1(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 23); + return (((tilegx_bundle_bits)(n & 0x3fff)) << 37); } -static __inline tile_bundle_bits -create_MMStart_X1(int num) +static __inline tilegx_bundle_bits +create_MT_Imm14_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1f)) << 54); + return (((tilegx_bundle_bits)(n & 0x0000003f)) << 31) | + (((tilegx_bundle_bits)(n & 0x00003fc0)) << 37); } -static __inline tile_bundle_bits -create_MT_Imm15_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x0000003f)) << 31) | - (((tile_bundle_bits)(n & 0x00003fc0)) << 37) | - (((tile_bundle_bits)(n & 0x00004000)) << 44); -} - -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Mode(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1)) << 63); + return (((tilegx_bundle_bits)(n & 0x3)) << 62); } -static __inline tile_bundle_bits -create_NoRegOpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 0); -} - -static __inline tile_bundle_bits -create_Opcode_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 10); -} - -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Opcode_X0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x7) << 28); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Opcode_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0xf)) << 59); + return (((tilegx_bundle_bits)(n & 0x7)) << 59); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Opcode_Y0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0xf) << 27); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Opcode_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0xf)) << 59); + return (((tilegx_bundle_bits)(n & 0xf)) << 58); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_Opcode_Y2(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x7)) << 56); -} - -static __inline tile_bundle_bits -create_RROpcodeExtension_SN(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0xf) << 4); + return ((n & 0x00000001) << 26) | + (((tilegx_bundle_bits)(n & 0x00000002)) << 56); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_RRROpcodeExtension_X0(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x1ff) << 18); + return ((n & 0x3ff) << 18); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_RRROpcodeExtension_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1ff)) << 49); + return (((tilegx_bundle_bits)(n & 0x3ff)) << 49); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_RRROpcodeExtension_Y0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3) << 18); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_RRROpcodeExtension_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3)) << 49); + return (((tilegx_bundle_bits)(n & 0x3)) << 49); } -static __inline tile_bundle_bits -create_RouteOpcodeExtension_SN(int num) +static __inline tilegx_bundle_bits +create_ShAmt_X0(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 0); + return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits -create_S_X0(int num) +static __inline tilegx_bundle_bits +create_ShAmt_X1(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x1) << 27); + return (((tilegx_bundle_bits)(n & 0x3f)) << 43); } -static __inline tile_bundle_bits -create_S_X1(int num) +static __inline tilegx_bundle_bits +create_ShAmt_Y0(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1)) << 58); + return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits -create_ShAmt_X0(int num) +static __inline tilegx_bundle_bits +create_ShAmt_Y1(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); + return (((tilegx_bundle_bits)(n & 0x3f)) << 43); } -static __inline tile_bundle_bits -create_ShAmt_X1(int num) +static __inline tilegx_bundle_bits +create_ShiftOpcodeExtension_X0(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1f)) << 43); + return ((n & 0x3ff) << 18); } -static __inline tile_bundle_bits -create_ShAmt_Y0(int num) +static __inline tilegx_bundle_bits +create_ShiftOpcodeExtension_X1(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); + return (((tilegx_bundle_bits)(n & 0x3ff)) << 49); } -static __inline tile_bundle_bits -create_ShAmt_Y1(int num) +static __inline tilegx_bundle_bits +create_ShiftOpcodeExtension_Y0(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1f)) << 43); + return ((n & 0x3) << 18); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits +create_ShiftOpcodeExtension_Y1(int num) +{ + const unsigned int n = (unsigned int)num; + return (((tilegx_bundle_bits)(n & 0x3)) << 49); +} + +static __inline tilegx_bundle_bits create_SrcA_X0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3f) << 6); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcA_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3f)) << 37); + return (((tilegx_bundle_bits)(n & 0x3f)) << 37); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcA_Y0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3f) << 6); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcA_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3f)) << 37); + return (((tilegx_bundle_bits)(n & 0x3f)) << 37); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcA_Y2(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x00000001) << 26) | - (((tile_bundle_bits)(n & 0x0000003e)) << 50); + return ((n & 0x3f) << 20); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcBDest_Y2(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x3f) << 20); + return (((tilegx_bundle_bits)(n & 0x3f)) << 51); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcB_X0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcB_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3f)) << 43); + return (((tilegx_bundle_bits)(n & 0x3f)) << 43); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcB_Y0(int num) { const unsigned int n = (unsigned int)num; return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits +static __inline tilegx_bundle_bits create_SrcB_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3f)) << 43); + return (((tilegx_bundle_bits)(n & 0x3f)) << 43); } -static __inline tile_bundle_bits -create_Src_SN(int num) +static __inline tilegx_bundle_bits +create_UnaryOpcodeExtension_X0(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x3) << 0); -} - -static __inline tile_bundle_bits -create_UnOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); -} - -static __inline tile_bundle_bits -create_UnOpcodeExtension_X1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1f)) << 43); -} - -static __inline tile_bundle_bits -create_UnOpcodeExtension_Y0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x1f) << 12); -} - -static __inline tile_bundle_bits -create_UnOpcodeExtension_Y1(int num) -{ - const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x1f)) << 43); -} - -static __inline tile_bundle_bits -create_UnShOpcodeExtension_X0(int num) -{ - const unsigned int n = (unsigned int)num; - return ((n & 0x3ff) << 17); + return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits -create_UnShOpcodeExtension_X1(int num) +static __inline tilegx_bundle_bits +create_UnaryOpcodeExtension_X1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x3ff)) << 48); + return (((tilegx_bundle_bits)(n & 0x3f)) << 43); } -static __inline tile_bundle_bits -create_UnShOpcodeExtension_Y0(int num) +static __inline tilegx_bundle_bits +create_UnaryOpcodeExtension_Y0(int num) { const unsigned int n = (unsigned int)num; - return ((n & 0x7) << 17); + return ((n & 0x3f) << 12); } -static __inline tile_bundle_bits -create_UnShOpcodeExtension_Y1(int num) +static __inline tilegx_bundle_bits +create_UnaryOpcodeExtension_Y1(int num) { const unsigned int n = (unsigned int)num; - return (((tile_bundle_bits)(n & 0x7)) << 48); + return (((tilegx_bundle_bits)(n & 0x3f)) << 43); } - typedef enum { - TILE_PIPELINE_X0, - TILE_PIPELINE_X1, - TILE_PIPELINE_Y0, - TILE_PIPELINE_Y1, - TILE_PIPELINE_Y2, -} tile_pipeline; + TILEGX_PIPELINE_X0, + TILEGX_PIPELINE_X1, + TILEGX_PIPELINE_Y0, + TILEGX_PIPELINE_Y1, + TILEGX_PIPELINE_Y2, +} tilegx_pipeline; -#define tile_is_x_pipeline(p) ((int)(p) <= (int)TILE_PIPELINE_X1) +#define tilegx_is_x_pipeline(p) ((int)(p) <= (int)TILEGX_PIPELINE_X1) typedef enum { - TILE_OP_TYPE_REGISTER, - TILE_OP_TYPE_IMMEDIATE, - TILE_OP_TYPE_ADDRESS, - TILE_OP_TYPE_SPR -} tile_operand_type; + TILEGX_OP_TYPE_REGISTER, + TILEGX_OP_TYPE_IMMEDIATE, + TILEGX_OP_TYPE_ADDRESS, + TILEGX_OP_TYPE_SPR +} tilegx_operand_type; -/* This is the bit that determines if a bundle is in the Y encoding. */ -#define TILE_BUNDLE_Y_ENCODING_MASK ((tile_bundle_bits)1 << 63) +/* These are the bits that determine if a bundle is in the X encoding. */ +#define TILEGX_BUNDLE_MODE_MASK ((tilegx_bundle_bits)3 << 62) enum { /* Maximum number of instructions in a bundle (2 for X, 3 for Y). */ - TILE_MAX_INSTRUCTIONS_PER_BUNDLE = 3, + TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE = 3, /* How many different pipeline encodings are there? X0, X1, Y0, Y1, Y2. */ - TILE_NUM_PIPELINE_ENCODINGS = 5, + TILEGX_NUM_PIPELINE_ENCODINGS = 5, - /* Log base 2 of TILE_BUNDLE_SIZE_IN_BYTES. */ - TILE_LOG2_BUNDLE_SIZE_IN_BYTES = 3, + /* Log base 2 of TILEGX_BUNDLE_SIZE_IN_BYTES. */ + TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES = 3, /* Instructions take this many bytes. */ - TILE_BUNDLE_SIZE_IN_BYTES = 1 << TILE_LOG2_BUNDLE_SIZE_IN_BYTES, + TILEGX_BUNDLE_SIZE_IN_BYTES = 1 << TILEGX_LOG2_BUNDLE_SIZE_IN_BYTES, - /* Log base 2 of TILE_BUNDLE_ALIGNMENT_IN_BYTES. */ - TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3, + /* Log base 2 of TILEGX_BUNDLE_ALIGNMENT_IN_BYTES. */ + TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES = 3, /* Bundles should be aligned modulo this number of bytes. */ - TILE_BUNDLE_ALIGNMENT_IN_BYTES = - (1 << TILE_LOG2_BUNDLE_ALIGNMENT_IN_BYTES), - - /* Log base 2 of TILE_SN_INSTRUCTION_SIZE_IN_BYTES. */ - TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES = 1, - - /* Static network instructions take this many bytes. */ - TILE_SN_INSTRUCTION_SIZE_IN_BYTES = - (1 << TILE_LOG2_SN_INSTRUCTION_SIZE_IN_BYTES), + TILEGX_BUNDLE_ALIGNMENT_IN_BYTES = + (1 << TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES), /* Number of registers (some are magic, such as network I/O). */ - TILE_NUM_REGISTERS = 64, - - /* Number of static network registers. */ - TILE_NUM_SN_REGISTERS = 4 + TILEGX_NUM_REGISTERS = 64, }; -struct tile_operand +struct tilegx_operand { /* Is this operand a register, immediate or address? */ - tile_operand_type type; + tilegx_operand_type type; /* The default relocation type for this operand. */ signed int default_reloc : 16; @@ -1437,27 +1180,27 @@ struct tile_operand unsigned int rightshift : 2; /* Return the bits for this operand to be ORed into an existing bundle. */ - tile_bundle_bits (*insert) (int op); + tilegx_bundle_bits (*insert) (int op); /* Extract this operand and return it. */ - unsigned int (*extract) (tile_bundle_bits bundle); + unsigned int (*extract) (tilegx_bundle_bits bundle); }; -extern const struct tile_operand tile_operands[]; +extern const struct tilegx_operand tilegx_operands[]; /* One finite-state machine per pipe for rapid instruction decoding. */ extern const unsigned short * const -tile_bundle_decoder_fsms[TILE_NUM_PIPELINE_ENCODINGS]; +tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS]; -struct tile_opcode +struct tilegx_opcode { /* The opcode mnemonic, e.g. "add" */ const char *name; /* The enum value for this mnemonic. */ - tile_mnemonic mnemonic; + tilegx_mnemonic mnemonic; /* A bit mask of which of the five pipes this instruction is compatible with: @@ -1478,29 +1221,28 @@ struct tile_opcode unsigned char can_bundle; /* The description of the operands. Each of these is an - * index into the tile_operands[] table. */ - unsigned char operands[TILE_NUM_PIPELINE_ENCODINGS][TILE_MAX_OPERANDS]; + * index into the tilegx_operands[] table. */ + unsigned char operands[TILEGX_NUM_PIPELINE_ENCODINGS][TILEGX_MAX_OPERANDS]; }; -extern const struct tile_opcode tile_opcodes[]; - +extern const struct tilegx_opcode tilegx_opcodes[]; /* Used for non-textual disassembly into structs. */ -struct tile_decoded_instruction +struct tilegx_decoded_instruction { - const struct tile_opcode *opcode; - const struct tile_operand *operands[TILE_MAX_OPERANDS]; - int operand_values[TILE_MAX_OPERANDS]; + const struct tilegx_opcode *opcode; + const struct tilegx_operand *operands[TILEGX_MAX_OPERANDS]; + long long operand_values[TILEGX_MAX_OPERANDS]; }; /* Disassemble a bundle into a struct for machine processing. */ -extern int parse_insn_tile(tile_bundle_bits bits, - unsigned int pc, - struct tile_decoded_instruction - decoded[TILE_MAX_INSTRUCTIONS_PER_BUNDLE]); +extern int parse_insn_tilegx(tilegx_bundle_bits bits, + unsigned long long pc, + struct tilegx_decoded_instruction + decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]); -#endif /* opcode_tile_h */ +#endif /* opcode_tilegx_h */ diff --git a/arch/tile/include/asm/opcode_constants_64.h b/arch/tile/include/asm/opcode_constants_64.h index 227d033b180c..710192869476 100644 --- a/arch/tile/include/asm/opcode_constants_64.h +++ b/arch/tile/include/asm/opcode_constants_64.h @@ -1,5 +1,5 @@ /* - * Copyright 2010 Tilera Corporation. All Rights Reserved. + * Copyright 2011 Tilera Corporation. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,462 +19,591 @@ #define _TILE_OPCODE_CONSTANTS_H enum { - ADDBS_U_SPECIAL_0_OPCODE_X0 = 98, - ADDBS_U_SPECIAL_0_OPCODE_X1 = 68, - ADDB_SPECIAL_0_OPCODE_X0 = 1, - ADDB_SPECIAL_0_OPCODE_X1 = 1, - ADDHS_SPECIAL_0_OPCODE_X0 = 99, - ADDHS_SPECIAL_0_OPCODE_X1 = 69, - ADDH_SPECIAL_0_OPCODE_X0 = 2, - ADDH_SPECIAL_0_OPCODE_X1 = 2, - ADDIB_IMM_0_OPCODE_X0 = 1, - ADDIB_IMM_0_OPCODE_X1 = 1, - ADDIH_IMM_0_OPCODE_X0 = 2, - ADDIH_IMM_0_OPCODE_X1 = 2, - ADDI_IMM_0_OPCODE_X0 = 3, - ADDI_IMM_0_OPCODE_X1 = 3, - ADDI_IMM_1_OPCODE_SN = 1, - ADDI_OPCODE_Y0 = 9, - ADDI_OPCODE_Y1 = 7, - ADDLIS_OPCODE_X0 = 1, - ADDLIS_OPCODE_X1 = 2, - ADDLI_OPCODE_X0 = 2, - ADDLI_OPCODE_X1 = 3, - ADDS_SPECIAL_0_OPCODE_X0 = 96, - ADDS_SPECIAL_0_OPCODE_X1 = 66, - ADD_SPECIAL_0_OPCODE_X0 = 3, - ADD_SPECIAL_0_OPCODE_X1 = 3, - ADD_SPECIAL_0_OPCODE_Y0 = 0, - ADD_SPECIAL_0_OPCODE_Y1 = 0, - ADIFFB_U_SPECIAL_0_OPCODE_X0 = 4, - ADIFFH_SPECIAL_0_OPCODE_X0 = 5, - ANDI_IMM_0_OPCODE_X0 = 1, - ANDI_IMM_0_OPCODE_X1 = 4, - ANDI_OPCODE_Y0 = 10, - ANDI_OPCODE_Y1 = 8, - AND_SPECIAL_0_OPCODE_X0 = 6, - AND_SPECIAL_0_OPCODE_X1 = 4, - AND_SPECIAL_2_OPCODE_Y0 = 0, - AND_SPECIAL_2_OPCODE_Y1 = 0, - AULI_OPCODE_X0 = 3, - AULI_OPCODE_X1 = 4, - AVGB_U_SPECIAL_0_OPCODE_X0 = 7, - AVGH_SPECIAL_0_OPCODE_X0 = 8, - BBNST_BRANCH_OPCODE_X1 = 15, - BBNS_BRANCH_OPCODE_X1 = 14, - BBNS_OPCODE_SN = 63, - BBST_BRANCH_OPCODE_X1 = 13, - BBS_BRANCH_OPCODE_X1 = 12, - BBS_OPCODE_SN = 62, - BGEZT_BRANCH_OPCODE_X1 = 7, - BGEZ_BRANCH_OPCODE_X1 = 6, - BGEZ_OPCODE_SN = 61, - BGZT_BRANCH_OPCODE_X1 = 5, - BGZ_BRANCH_OPCODE_X1 = 4, - BGZ_OPCODE_SN = 58, - BITX_UN_0_SHUN_0_OPCODE_X0 = 1, - BITX_UN_0_SHUN_0_OPCODE_Y0 = 1, - BLEZT_BRANCH_OPCODE_X1 = 11, - BLEZ_BRANCH_OPCODE_X1 = 10, - BLEZ_OPCODE_SN = 59, - BLZT_BRANCH_OPCODE_X1 = 9, - BLZ_BRANCH_OPCODE_X1 = 8, - BLZ_OPCODE_SN = 60, - BNZT_BRANCH_OPCODE_X1 = 3, - BNZ_BRANCH_OPCODE_X1 = 2, - BNZ_OPCODE_SN = 57, - BPT_NOREG_RR_IMM_0_OPCODE_SN = 1, - BRANCH_OPCODE_X1 = 5, - BYTEX_UN_0_SHUN_0_OPCODE_X0 = 2, - BYTEX_UN_0_SHUN_0_OPCODE_Y0 = 2, - BZT_BRANCH_OPCODE_X1 = 1, - BZ_BRANCH_OPCODE_X1 = 0, - BZ_OPCODE_SN = 56, - CLZ_UN_0_SHUN_0_OPCODE_X0 = 3, - CLZ_UN_0_SHUN_0_OPCODE_Y0 = 3, - CRC32_32_SPECIAL_0_OPCODE_X0 = 9, - CRC32_8_SPECIAL_0_OPCODE_X0 = 10, - CTZ_UN_0_SHUN_0_OPCODE_X0 = 4, - CTZ_UN_0_SHUN_0_OPCODE_Y0 = 4, - DRAIN_UN_0_SHUN_0_OPCODE_X1 = 1, - DTLBPR_UN_0_SHUN_0_OPCODE_X1 = 2, - DWORD_ALIGN_SPECIAL_0_OPCODE_X0 = 95, - FINV_UN_0_SHUN_0_OPCODE_X1 = 3, - FLUSH_UN_0_SHUN_0_OPCODE_X1 = 4, - FNOP_NOREG_RR_IMM_0_OPCODE_SN = 3, - FNOP_UN_0_SHUN_0_OPCODE_X0 = 5, - FNOP_UN_0_SHUN_0_OPCODE_X1 = 5, - FNOP_UN_0_SHUN_0_OPCODE_Y0 = 5, - FNOP_UN_0_SHUN_0_OPCODE_Y1 = 1, - HALT_NOREG_RR_IMM_0_OPCODE_SN = 0, - ICOH_UN_0_SHUN_0_OPCODE_X1 = 6, - ILL_UN_0_SHUN_0_OPCODE_X1 = 7, - ILL_UN_0_SHUN_0_OPCODE_Y1 = 2, - IMM_0_OPCODE_SN = 0, - IMM_0_OPCODE_X0 = 4, - IMM_0_OPCODE_X1 = 6, - IMM_1_OPCODE_SN = 1, - IMM_OPCODE_0_X0 = 5, - INTHB_SPECIAL_0_OPCODE_X0 = 11, - INTHB_SPECIAL_0_OPCODE_X1 = 5, - INTHH_SPECIAL_0_OPCODE_X0 = 12, - INTHH_SPECIAL_0_OPCODE_X1 = 6, - INTLB_SPECIAL_0_OPCODE_X0 = 13, - INTLB_SPECIAL_0_OPCODE_X1 = 7, - INTLH_SPECIAL_0_OPCODE_X0 = 14, - INTLH_SPECIAL_0_OPCODE_X1 = 8, - INV_UN_0_SHUN_0_OPCODE_X1 = 8, - IRET_UN_0_SHUN_0_OPCODE_X1 = 9, - JALB_OPCODE_X1 = 13, - JALF_OPCODE_X1 = 12, - JALRP_SPECIAL_0_OPCODE_X1 = 9, - JALRR_IMM_1_OPCODE_SN = 3, - JALR_RR_IMM_0_OPCODE_SN = 5, - JALR_SPECIAL_0_OPCODE_X1 = 10, - JB_OPCODE_X1 = 11, - JF_OPCODE_X1 = 10, - JRP_SPECIAL_0_OPCODE_X1 = 11, - JRR_IMM_1_OPCODE_SN = 2, - JR_RR_IMM_0_OPCODE_SN = 4, - JR_SPECIAL_0_OPCODE_X1 = 12, - LBADD_IMM_0_OPCODE_X1 = 22, - LBADD_U_IMM_0_OPCODE_X1 = 23, - LB_OPCODE_Y2 = 0, - LB_UN_0_SHUN_0_OPCODE_X1 = 10, - LB_U_OPCODE_Y2 = 1, - LB_U_UN_0_SHUN_0_OPCODE_X1 = 11, - LHADD_IMM_0_OPCODE_X1 = 24, - LHADD_U_IMM_0_OPCODE_X1 = 25, - LH_OPCODE_Y2 = 2, - LH_UN_0_SHUN_0_OPCODE_X1 = 12, - LH_U_OPCODE_Y2 = 3, - LH_U_UN_0_SHUN_0_OPCODE_X1 = 13, - LNK_SPECIAL_0_OPCODE_X1 = 13, - LWADD_IMM_0_OPCODE_X1 = 26, - LWADD_NA_IMM_0_OPCODE_X1 = 27, - LW_NA_UN_0_SHUN_0_OPCODE_X1 = 24, - LW_OPCODE_Y2 = 4, - LW_UN_0_SHUN_0_OPCODE_X1 = 14, - MAXB_U_SPECIAL_0_OPCODE_X0 = 15, - MAXB_U_SPECIAL_0_OPCODE_X1 = 14, - MAXH_SPECIAL_0_OPCODE_X0 = 16, - MAXH_SPECIAL_0_OPCODE_X1 = 15, - MAXIB_U_IMM_0_OPCODE_X0 = 4, - MAXIB_U_IMM_0_OPCODE_X1 = 5, - MAXIH_IMM_0_OPCODE_X0 = 5, - MAXIH_IMM_0_OPCODE_X1 = 6, - MFSPR_IMM_0_OPCODE_X1 = 7, - MF_UN_0_SHUN_0_OPCODE_X1 = 15, - MINB_U_SPECIAL_0_OPCODE_X0 = 17, - MINB_U_SPECIAL_0_OPCODE_X1 = 16, - MINH_SPECIAL_0_OPCODE_X0 = 18, - MINH_SPECIAL_0_OPCODE_X1 = 17, - MINIB_U_IMM_0_OPCODE_X0 = 6, - MINIB_U_IMM_0_OPCODE_X1 = 8, - MINIH_IMM_0_OPCODE_X0 = 7, - MINIH_IMM_0_OPCODE_X1 = 9, - MM_OPCODE_X0 = 6, - MM_OPCODE_X1 = 7, - MNZB_SPECIAL_0_OPCODE_X0 = 19, - MNZB_SPECIAL_0_OPCODE_X1 = 18, - MNZH_SPECIAL_0_OPCODE_X0 = 20, - MNZH_SPECIAL_0_OPCODE_X1 = 19, - MNZ_SPECIAL_0_OPCODE_X0 = 21, - MNZ_SPECIAL_0_OPCODE_X1 = 20, - MNZ_SPECIAL_1_OPCODE_Y0 = 0, - MNZ_SPECIAL_1_OPCODE_Y1 = 1, - MOVEI_IMM_1_OPCODE_SN = 0, - MOVE_RR_IMM_0_OPCODE_SN = 8, - MTSPR_IMM_0_OPCODE_X1 = 10, - MULHHA_SS_SPECIAL_0_OPCODE_X0 = 22, - MULHHA_SS_SPECIAL_7_OPCODE_Y0 = 0, - MULHHA_SU_SPECIAL_0_OPCODE_X0 = 23, - MULHHA_UU_SPECIAL_0_OPCODE_X0 = 24, - MULHHA_UU_SPECIAL_7_OPCODE_Y0 = 1, - MULHHSA_UU_SPECIAL_0_OPCODE_X0 = 25, - MULHH_SS_SPECIAL_0_OPCODE_X0 = 26, - MULHH_SS_SPECIAL_6_OPCODE_Y0 = 0, - MULHH_SU_SPECIAL_0_OPCODE_X0 = 27, - MULHH_UU_SPECIAL_0_OPCODE_X0 = 28, - MULHH_UU_SPECIAL_6_OPCODE_Y0 = 1, - MULHLA_SS_SPECIAL_0_OPCODE_X0 = 29, - MULHLA_SU_SPECIAL_0_OPCODE_X0 = 30, - MULHLA_US_SPECIAL_0_OPCODE_X0 = 31, - MULHLA_UU_SPECIAL_0_OPCODE_X0 = 32, - MULHLSA_UU_SPECIAL_0_OPCODE_X0 = 33, - MULHLSA_UU_SPECIAL_5_OPCODE_Y0 = 0, - MULHL_SS_SPECIAL_0_OPCODE_X0 = 34, - MULHL_SU_SPECIAL_0_OPCODE_X0 = 35, - MULHL_US_SPECIAL_0_OPCODE_X0 = 36, - MULHL_UU_SPECIAL_0_OPCODE_X0 = 37, - MULLLA_SS_SPECIAL_0_OPCODE_X0 = 38, - MULLLA_SS_SPECIAL_7_OPCODE_Y0 = 2, - MULLLA_SU_SPECIAL_0_OPCODE_X0 = 39, - MULLLA_UU_SPECIAL_0_OPCODE_X0 = 40, - MULLLA_UU_SPECIAL_7_OPCODE_Y0 = 3, - MULLLSA_UU_SPECIAL_0_OPCODE_X0 = 41, - MULLL_SS_SPECIAL_0_OPCODE_X0 = 42, - MULLL_SS_SPECIAL_6_OPCODE_Y0 = 2, - MULLL_SU_SPECIAL_0_OPCODE_X0 = 43, - MULLL_UU_SPECIAL_0_OPCODE_X0 = 44, - MULLL_UU_SPECIAL_6_OPCODE_Y0 = 3, - MVNZ_SPECIAL_0_OPCODE_X0 = 45, - MVNZ_SPECIAL_1_OPCODE_Y0 = 1, - MVZ_SPECIAL_0_OPCODE_X0 = 46, - MVZ_SPECIAL_1_OPCODE_Y0 = 2, - MZB_SPECIAL_0_OPCODE_X0 = 47, - MZB_SPECIAL_0_OPCODE_X1 = 21, - MZH_SPECIAL_0_OPCODE_X0 = 48, - MZH_SPECIAL_0_OPCODE_X1 = 22, - MZ_SPECIAL_0_OPCODE_X0 = 49, - MZ_SPECIAL_0_OPCODE_X1 = 23, - MZ_SPECIAL_1_OPCODE_Y0 = 3, - MZ_SPECIAL_1_OPCODE_Y1 = 2, - NAP_UN_0_SHUN_0_OPCODE_X1 = 16, - NOP_NOREG_RR_IMM_0_OPCODE_SN = 2, - NOP_UN_0_SHUN_0_OPCODE_X0 = 6, - NOP_UN_0_SHUN_0_OPCODE_X1 = 17, - NOP_UN_0_SHUN_0_OPCODE_Y0 = 6, - NOP_UN_0_SHUN_0_OPCODE_Y1 = 3, - NOREG_RR_IMM_0_OPCODE_SN = 0, - NOR_SPECIAL_0_OPCODE_X0 = 50, - NOR_SPECIAL_0_OPCODE_X1 = 24, - NOR_SPECIAL_2_OPCODE_Y0 = 1, - NOR_SPECIAL_2_OPCODE_Y1 = 1, - ORI_IMM_0_OPCODE_X0 = 8, - ORI_IMM_0_OPCODE_X1 = 11, - ORI_OPCODE_Y0 = 11, - ORI_OPCODE_Y1 = 9, - OR_SPECIAL_0_OPCODE_X0 = 51, - OR_SPECIAL_0_OPCODE_X1 = 25, - OR_SPECIAL_2_OPCODE_Y0 = 2, - OR_SPECIAL_2_OPCODE_Y1 = 2, - PACKBS_U_SPECIAL_0_OPCODE_X0 = 103, - PACKBS_U_SPECIAL_0_OPCODE_X1 = 73, - PACKHB_SPECIAL_0_OPCODE_X0 = 52, - PACKHB_SPECIAL_0_OPCODE_X1 = 26, - PACKHS_SPECIAL_0_OPCODE_X0 = 102, - PACKHS_SPECIAL_0_OPCODE_X1 = 72, - PACKLB_SPECIAL_0_OPCODE_X0 = 53, - PACKLB_SPECIAL_0_OPCODE_X1 = 27, - PCNT_UN_0_SHUN_0_OPCODE_X0 = 7, - PCNT_UN_0_SHUN_0_OPCODE_Y0 = 7, - RLI_SHUN_0_OPCODE_X0 = 1, - RLI_SHUN_0_OPCODE_X1 = 1, - RLI_SHUN_0_OPCODE_Y0 = 1, - RLI_SHUN_0_OPCODE_Y1 = 1, - RL_SPECIAL_0_OPCODE_X0 = 54, - RL_SPECIAL_0_OPCODE_X1 = 28, - RL_SPECIAL_3_OPCODE_Y0 = 0, - RL_SPECIAL_3_OPCODE_Y1 = 0, - RR_IMM_0_OPCODE_SN = 0, - S1A_SPECIAL_0_OPCODE_X0 = 55, - S1A_SPECIAL_0_OPCODE_X1 = 29, - S1A_SPECIAL_0_OPCODE_Y0 = 1, - S1A_SPECIAL_0_OPCODE_Y1 = 1, - S2A_SPECIAL_0_OPCODE_X0 = 56, - S2A_SPECIAL_0_OPCODE_X1 = 30, - S2A_SPECIAL_0_OPCODE_Y0 = 2, - S2A_SPECIAL_0_OPCODE_Y1 = 2, - S3A_SPECIAL_0_OPCODE_X0 = 57, - S3A_SPECIAL_0_OPCODE_X1 = 31, - S3A_SPECIAL_5_OPCODE_Y0 = 1, - S3A_SPECIAL_5_OPCODE_Y1 = 1, - SADAB_U_SPECIAL_0_OPCODE_X0 = 58, - SADAH_SPECIAL_0_OPCODE_X0 = 59, - SADAH_U_SPECIAL_0_OPCODE_X0 = 60, - SADB_U_SPECIAL_0_OPCODE_X0 = 61, - SADH_SPECIAL_0_OPCODE_X0 = 62, - SADH_U_SPECIAL_0_OPCODE_X0 = 63, - SBADD_IMM_0_OPCODE_X1 = 28, - SB_OPCODE_Y2 = 5, - SB_SPECIAL_0_OPCODE_X1 = 32, - SEQB_SPECIAL_0_OPCODE_X0 = 64, - SEQB_SPECIAL_0_OPCODE_X1 = 33, - SEQH_SPECIAL_0_OPCODE_X0 = 65, - SEQH_SPECIAL_0_OPCODE_X1 = 34, - SEQIB_IMM_0_OPCODE_X0 = 9, - SEQIB_IMM_0_OPCODE_X1 = 12, - SEQIH_IMM_0_OPCODE_X0 = 10, - SEQIH_IMM_0_OPCODE_X1 = 13, - SEQI_IMM_0_OPCODE_X0 = 11, - SEQI_IMM_0_OPCODE_X1 = 14, - SEQI_OPCODE_Y0 = 12, - SEQI_OPCODE_Y1 = 10, - SEQ_SPECIAL_0_OPCODE_X0 = 66, - SEQ_SPECIAL_0_OPCODE_X1 = 35, - SEQ_SPECIAL_5_OPCODE_Y0 = 2, - SEQ_SPECIAL_5_OPCODE_Y1 = 2, - SHADD_IMM_0_OPCODE_X1 = 29, - SHL8II_IMM_0_OPCODE_SN = 3, - SHLB_SPECIAL_0_OPCODE_X0 = 67, - SHLB_SPECIAL_0_OPCODE_X1 = 36, - SHLH_SPECIAL_0_OPCODE_X0 = 68, - SHLH_SPECIAL_0_OPCODE_X1 = 37, - SHLIB_SHUN_0_OPCODE_X0 = 2, - SHLIB_SHUN_0_OPCODE_X1 = 2, - SHLIH_SHUN_0_OPCODE_X0 = 3, - SHLIH_SHUN_0_OPCODE_X1 = 3, - SHLI_SHUN_0_OPCODE_X0 = 4, - SHLI_SHUN_0_OPCODE_X1 = 4, - SHLI_SHUN_0_OPCODE_Y0 = 2, - SHLI_SHUN_0_OPCODE_Y1 = 2, - SHL_SPECIAL_0_OPCODE_X0 = 69, - SHL_SPECIAL_0_OPCODE_X1 = 38, - SHL_SPECIAL_3_OPCODE_Y0 = 1, - SHL_SPECIAL_3_OPCODE_Y1 = 1, - SHR1_RR_IMM_0_OPCODE_SN = 9, - SHRB_SPECIAL_0_OPCODE_X0 = 70, - SHRB_SPECIAL_0_OPCODE_X1 = 39, - SHRH_SPECIAL_0_OPCODE_X0 = 71, - SHRH_SPECIAL_0_OPCODE_X1 = 40, - SHRIB_SHUN_0_OPCODE_X0 = 5, - SHRIB_SHUN_0_OPCODE_X1 = 5, - SHRIH_SHUN_0_OPCODE_X0 = 6, - SHRIH_SHUN_0_OPCODE_X1 = 6, - SHRI_SHUN_0_OPCODE_X0 = 7, - SHRI_SHUN_0_OPCODE_X1 = 7, - SHRI_SHUN_0_OPCODE_Y0 = 3, - SHRI_SHUN_0_OPCODE_Y1 = 3, - SHR_SPECIAL_0_OPCODE_X0 = 72, - SHR_SPECIAL_0_OPCODE_X1 = 41, - SHR_SPECIAL_3_OPCODE_Y0 = 2, - SHR_SPECIAL_3_OPCODE_Y1 = 2, - SHUN_0_OPCODE_X0 = 7, - SHUN_0_OPCODE_X1 = 8, - SHUN_0_OPCODE_Y0 = 13, - SHUN_0_OPCODE_Y1 = 11, - SH_OPCODE_Y2 = 6, - SH_SPECIAL_0_OPCODE_X1 = 42, - SLTB_SPECIAL_0_OPCODE_X0 = 73, - SLTB_SPECIAL_0_OPCODE_X1 = 43, - SLTB_U_SPECIAL_0_OPCODE_X0 = 74, - SLTB_U_SPECIAL_0_OPCODE_X1 = 44, - SLTEB_SPECIAL_0_OPCODE_X0 = 75, - SLTEB_SPECIAL_0_OPCODE_X1 = 45, - SLTEB_U_SPECIAL_0_OPCODE_X0 = 76, - SLTEB_U_SPECIAL_0_OPCODE_X1 = 46, - SLTEH_SPECIAL_0_OPCODE_X0 = 77, - SLTEH_SPECIAL_0_OPCODE_X1 = 47, - SLTEH_U_SPECIAL_0_OPCODE_X0 = 78, - SLTEH_U_SPECIAL_0_OPCODE_X1 = 48, - SLTE_SPECIAL_0_OPCODE_X0 = 79, - SLTE_SPECIAL_0_OPCODE_X1 = 49, - SLTE_SPECIAL_4_OPCODE_Y0 = 0, - SLTE_SPECIAL_4_OPCODE_Y1 = 0, - SLTE_U_SPECIAL_0_OPCODE_X0 = 80, - SLTE_U_SPECIAL_0_OPCODE_X1 = 50, - SLTE_U_SPECIAL_4_OPCODE_Y0 = 1, - SLTE_U_SPECIAL_4_OPCODE_Y1 = 1, - SLTH_SPECIAL_0_OPCODE_X0 = 81, - SLTH_SPECIAL_0_OPCODE_X1 = 51, - SLTH_U_SPECIAL_0_OPCODE_X0 = 82, - SLTH_U_SPECIAL_0_OPCODE_X1 = 52, - SLTIB_IMM_0_OPCODE_X0 = 12, - SLTIB_IMM_0_OPCODE_X1 = 15, - SLTIB_U_IMM_0_OPCODE_X0 = 13, - SLTIB_U_IMM_0_OPCODE_X1 = 16, - SLTIH_IMM_0_OPCODE_X0 = 14, - SLTIH_IMM_0_OPCODE_X1 = 17, - SLTIH_U_IMM_0_OPCODE_X0 = 15, - SLTIH_U_IMM_0_OPCODE_X1 = 18, - SLTI_IMM_0_OPCODE_X0 = 16, - SLTI_IMM_0_OPCODE_X1 = 19, - SLTI_OPCODE_Y0 = 14, - SLTI_OPCODE_Y1 = 12, - SLTI_U_IMM_0_OPCODE_X0 = 17, - SLTI_U_IMM_0_OPCODE_X1 = 20, - SLTI_U_OPCODE_Y0 = 15, - SLTI_U_OPCODE_Y1 = 13, - SLT_SPECIAL_0_OPCODE_X0 = 83, - SLT_SPECIAL_0_OPCODE_X1 = 53, - SLT_SPECIAL_4_OPCODE_Y0 = 2, - SLT_SPECIAL_4_OPCODE_Y1 = 2, - SLT_U_SPECIAL_0_OPCODE_X0 = 84, - SLT_U_SPECIAL_0_OPCODE_X1 = 54, - SLT_U_SPECIAL_4_OPCODE_Y0 = 3, - SLT_U_SPECIAL_4_OPCODE_Y1 = 3, - SNEB_SPECIAL_0_OPCODE_X0 = 85, - SNEB_SPECIAL_0_OPCODE_X1 = 55, - SNEH_SPECIAL_0_OPCODE_X0 = 86, - SNEH_SPECIAL_0_OPCODE_X1 = 56, - SNE_SPECIAL_0_OPCODE_X0 = 87, - SNE_SPECIAL_0_OPCODE_X1 = 57, - SNE_SPECIAL_5_OPCODE_Y0 = 3, - SNE_SPECIAL_5_OPCODE_Y1 = 3, - SPECIAL_0_OPCODE_X0 = 0, - SPECIAL_0_OPCODE_X1 = 1, - SPECIAL_0_OPCODE_Y0 = 1, - SPECIAL_0_OPCODE_Y1 = 1, - SPECIAL_1_OPCODE_Y0 = 2, - SPECIAL_1_OPCODE_Y1 = 2, - SPECIAL_2_OPCODE_Y0 = 3, - SPECIAL_2_OPCODE_Y1 = 3, - SPECIAL_3_OPCODE_Y0 = 4, - SPECIAL_3_OPCODE_Y1 = 4, - SPECIAL_4_OPCODE_Y0 = 5, - SPECIAL_4_OPCODE_Y1 = 5, - SPECIAL_5_OPCODE_Y0 = 6, - SPECIAL_5_OPCODE_Y1 = 6, - SPECIAL_6_OPCODE_Y0 = 7, - SPECIAL_7_OPCODE_Y0 = 8, - SRAB_SPECIAL_0_OPCODE_X0 = 88, - SRAB_SPECIAL_0_OPCODE_X1 = 58, - SRAH_SPECIAL_0_OPCODE_X0 = 89, - SRAH_SPECIAL_0_OPCODE_X1 = 59, - SRAIB_SHUN_0_OPCODE_X0 = 8, - SRAIB_SHUN_0_OPCODE_X1 = 8, - SRAIH_SHUN_0_OPCODE_X0 = 9, - SRAIH_SHUN_0_OPCODE_X1 = 9, - SRAI_SHUN_0_OPCODE_X0 = 10, - SRAI_SHUN_0_OPCODE_X1 = 10, - SRAI_SHUN_0_OPCODE_Y0 = 4, - SRAI_SHUN_0_OPCODE_Y1 = 4, - SRA_SPECIAL_0_OPCODE_X0 = 90, - SRA_SPECIAL_0_OPCODE_X1 = 60, - SRA_SPECIAL_3_OPCODE_Y0 = 3, - SRA_SPECIAL_3_OPCODE_Y1 = 3, - SUBBS_U_SPECIAL_0_OPCODE_X0 = 100, - SUBBS_U_SPECIAL_0_OPCODE_X1 = 70, - SUBB_SPECIAL_0_OPCODE_X0 = 91, - SUBB_SPECIAL_0_OPCODE_X1 = 61, - SUBHS_SPECIAL_0_OPCODE_X0 = 101, - SUBHS_SPECIAL_0_OPCODE_X1 = 71, - SUBH_SPECIAL_0_OPCODE_X0 = 92, - SUBH_SPECIAL_0_OPCODE_X1 = 62, - SUBS_SPECIAL_0_OPCODE_X0 = 97, - SUBS_SPECIAL_0_OPCODE_X1 = 67, - SUB_SPECIAL_0_OPCODE_X0 = 93, - SUB_SPECIAL_0_OPCODE_X1 = 63, - SUB_SPECIAL_0_OPCODE_Y0 = 3, - SUB_SPECIAL_0_OPCODE_Y1 = 3, - SWADD_IMM_0_OPCODE_X1 = 30, - SWINT0_UN_0_SHUN_0_OPCODE_X1 = 18, - SWINT1_UN_0_SHUN_0_OPCODE_X1 = 19, - SWINT2_UN_0_SHUN_0_OPCODE_X1 = 20, - SWINT3_UN_0_SHUN_0_OPCODE_X1 = 21, - SW_OPCODE_Y2 = 7, - SW_SPECIAL_0_OPCODE_X1 = 64, - TBLIDXB0_UN_0_SHUN_0_OPCODE_X0 = 8, - TBLIDXB0_UN_0_SHUN_0_OPCODE_Y0 = 8, - TBLIDXB1_UN_0_SHUN_0_OPCODE_X0 = 9, - TBLIDXB1_UN_0_SHUN_0_OPCODE_Y0 = 9, - TBLIDXB2_UN_0_SHUN_0_OPCODE_X0 = 10, - TBLIDXB2_UN_0_SHUN_0_OPCODE_Y0 = 10, - TBLIDXB3_UN_0_SHUN_0_OPCODE_X0 = 11, - TBLIDXB3_UN_0_SHUN_0_OPCODE_Y0 = 11, - TNS_UN_0_SHUN_0_OPCODE_X1 = 22, - UN_0_SHUN_0_OPCODE_X0 = 11, - UN_0_SHUN_0_OPCODE_X1 = 11, - UN_0_SHUN_0_OPCODE_Y0 = 5, - UN_0_SHUN_0_OPCODE_Y1 = 5, - WH64_UN_0_SHUN_0_OPCODE_X1 = 23, - XORI_IMM_0_OPCODE_X0 = 2, - XORI_IMM_0_OPCODE_X1 = 21, - XOR_SPECIAL_0_OPCODE_X0 = 94, - XOR_SPECIAL_0_OPCODE_X1 = 65, - XOR_SPECIAL_2_OPCODE_Y0 = 3, - XOR_SPECIAL_2_OPCODE_Y1 = 3 + ADDI_IMM8_OPCODE_X0 = 1, + ADDI_IMM8_OPCODE_X1 = 1, + ADDI_OPCODE_Y0 = 0, + ADDI_OPCODE_Y1 = 1, + ADDLI_OPCODE_X0 = 1, + ADDLI_OPCODE_X1 = 0, + ADDXI_IMM8_OPCODE_X0 = 2, + ADDXI_IMM8_OPCODE_X1 = 2, + ADDXI_OPCODE_Y0 = 1, + ADDXI_OPCODE_Y1 = 2, + ADDXLI_OPCODE_X0 = 2, + ADDXLI_OPCODE_X1 = 1, + ADDXSC_RRR_0_OPCODE_X0 = 1, + ADDXSC_RRR_0_OPCODE_X1 = 1, + ADDX_RRR_0_OPCODE_X0 = 2, + ADDX_RRR_0_OPCODE_X1 = 2, + ADDX_RRR_0_OPCODE_Y0 = 0, + ADDX_SPECIAL_0_OPCODE_Y1 = 0, + ADD_RRR_0_OPCODE_X0 = 3, + ADD_RRR_0_OPCODE_X1 = 3, + ADD_RRR_0_OPCODE_Y0 = 1, + ADD_SPECIAL_0_OPCODE_Y1 = 1, + ANDI_IMM8_OPCODE_X0 = 3, + ANDI_IMM8_OPCODE_X1 = 3, + ANDI_OPCODE_Y0 = 2, + ANDI_OPCODE_Y1 = 3, + AND_RRR_0_OPCODE_X0 = 4, + AND_RRR_0_OPCODE_X1 = 4, + AND_RRR_5_OPCODE_Y0 = 0, + AND_RRR_5_OPCODE_Y1 = 0, + BEQZT_BRANCH_OPCODE_X1 = 16, + BEQZ_BRANCH_OPCODE_X1 = 17, + BFEXTS_BF_OPCODE_X0 = 4, + BFEXTU_BF_OPCODE_X0 = 5, + BFINS_BF_OPCODE_X0 = 6, + BF_OPCODE_X0 = 3, + BGEZT_BRANCH_OPCODE_X1 = 18, + BGEZ_BRANCH_OPCODE_X1 = 19, + BGTZT_BRANCH_OPCODE_X1 = 20, + BGTZ_BRANCH_OPCODE_X1 = 21, + BLBCT_BRANCH_OPCODE_X1 = 22, + BLBC_BRANCH_OPCODE_X1 = 23, + BLBST_BRANCH_OPCODE_X1 = 24, + BLBS_BRANCH_OPCODE_X1 = 25, + BLEZT_BRANCH_OPCODE_X1 = 26, + BLEZ_BRANCH_OPCODE_X1 = 27, + BLTZT_BRANCH_OPCODE_X1 = 28, + BLTZ_BRANCH_OPCODE_X1 = 29, + BNEZT_BRANCH_OPCODE_X1 = 30, + BNEZ_BRANCH_OPCODE_X1 = 31, + BRANCH_OPCODE_X1 = 2, + CMOVEQZ_RRR_0_OPCODE_X0 = 5, + CMOVEQZ_RRR_4_OPCODE_Y0 = 0, + CMOVNEZ_RRR_0_OPCODE_X0 = 6, + CMOVNEZ_RRR_4_OPCODE_Y0 = 1, + CMPEQI_IMM8_OPCODE_X0 = 4, + CMPEQI_IMM8_OPCODE_X1 = 4, + CMPEQI_OPCODE_Y0 = 3, + CMPEQI_OPCODE_Y1 = 4, + CMPEQ_RRR_0_OPCODE_X0 = 7, + CMPEQ_RRR_0_OPCODE_X1 = 5, + CMPEQ_RRR_3_OPCODE_Y0 = 0, + CMPEQ_RRR_3_OPCODE_Y1 = 2, + CMPEXCH4_RRR_0_OPCODE_X1 = 6, + CMPEXCH_RRR_0_OPCODE_X1 = 7, + CMPLES_RRR_0_OPCODE_X0 = 8, + CMPLES_RRR_0_OPCODE_X1 = 8, + CMPLES_RRR_2_OPCODE_Y0 = 0, + CMPLES_RRR_2_OPCODE_Y1 = 0, + CMPLEU_RRR_0_OPCODE_X0 = 9, + CMPLEU_RRR_0_OPCODE_X1 = 9, + CMPLEU_RRR_2_OPCODE_Y0 = 1, + CMPLEU_RRR_2_OPCODE_Y1 = 1, + CMPLTSI_IMM8_OPCODE_X0 = 5, + CMPLTSI_IMM8_OPCODE_X1 = 5, + CMPLTSI_OPCODE_Y0 = 4, + CMPLTSI_OPCODE_Y1 = 5, + CMPLTS_RRR_0_OPCODE_X0 = 10, + CMPLTS_RRR_0_OPCODE_X1 = 10, + CMPLTS_RRR_2_OPCODE_Y0 = 2, + CMPLTS_RRR_2_OPCODE_Y1 = 2, + CMPLTUI_IMM8_OPCODE_X0 = 6, + CMPLTUI_IMM8_OPCODE_X1 = 6, + CMPLTU_RRR_0_OPCODE_X0 = 11, + CMPLTU_RRR_0_OPCODE_X1 = 11, + CMPLTU_RRR_2_OPCODE_Y0 = 3, + CMPLTU_RRR_2_OPCODE_Y1 = 3, + CMPNE_RRR_0_OPCODE_X0 = 12, + CMPNE_RRR_0_OPCODE_X1 = 12, + CMPNE_RRR_3_OPCODE_Y0 = 1, + CMPNE_RRR_3_OPCODE_Y1 = 3, + CMULAF_RRR_0_OPCODE_X0 = 13, + CMULA_RRR_0_OPCODE_X0 = 14, + CMULFR_RRR_0_OPCODE_X0 = 15, + CMULF_RRR_0_OPCODE_X0 = 16, + CMULHR_RRR_0_OPCODE_X0 = 17, + CMULH_RRR_0_OPCODE_X0 = 18, + CMUL_RRR_0_OPCODE_X0 = 19, + CNTLZ_UNARY_OPCODE_X0 = 1, + CNTLZ_UNARY_OPCODE_Y0 = 1, + CNTTZ_UNARY_OPCODE_X0 = 2, + CNTTZ_UNARY_OPCODE_Y0 = 2, + CRC32_32_RRR_0_OPCODE_X0 = 20, + CRC32_8_RRR_0_OPCODE_X0 = 21, + DBLALIGN2_RRR_0_OPCODE_X0 = 22, + DBLALIGN2_RRR_0_OPCODE_X1 = 13, + DBLALIGN4_RRR_0_OPCODE_X0 = 23, + DBLALIGN4_RRR_0_OPCODE_X1 = 14, + DBLALIGN6_RRR_0_OPCODE_X0 = 24, + DBLALIGN6_RRR_0_OPCODE_X1 = 15, + DBLALIGN_RRR_0_OPCODE_X0 = 25, + DRAIN_UNARY_OPCODE_X1 = 1, + DTLBPR_UNARY_OPCODE_X1 = 2, + EXCH4_RRR_0_OPCODE_X1 = 16, + EXCH_RRR_0_OPCODE_X1 = 17, + FDOUBLE_ADDSUB_RRR_0_OPCODE_X0 = 26, + FDOUBLE_ADD_FLAGS_RRR_0_OPCODE_X0 = 27, + FDOUBLE_MUL_FLAGS_RRR_0_OPCODE_X0 = 28, + FDOUBLE_PACK1_RRR_0_OPCODE_X0 = 29, + FDOUBLE_PACK2_RRR_0_OPCODE_X0 = 30, + FDOUBLE_SUB_FLAGS_RRR_0_OPCODE_X0 = 31, + FDOUBLE_UNPACK_MAX_RRR_0_OPCODE_X0 = 32, + FDOUBLE_UNPACK_MIN_RRR_0_OPCODE_X0 = 33, + FETCHADD4_RRR_0_OPCODE_X1 = 18, + FETCHADDGEZ4_RRR_0_OPCODE_X1 = 19, + FETCHADDGEZ_RRR_0_OPCODE_X1 = 20, + FETCHADD_RRR_0_OPCODE_X1 = 21, + FETCHAND4_RRR_0_OPCODE_X1 = 22, + FETCHAND_RRR_0_OPCODE_X1 = 23, + FETCHOR4_RRR_0_OPCODE_X1 = 24, + FETCHOR_RRR_0_OPCODE_X1 = 25, + FINV_UNARY_OPCODE_X1 = 3, + FLUSHWB_UNARY_OPCODE_X1 = 4, + FLUSH_UNARY_OPCODE_X1 = 5, + FNOP_UNARY_OPCODE_X0 = 3, + FNOP_UNARY_OPCODE_X1 = 6, + FNOP_UNARY_OPCODE_Y0 = 3, + FNOP_UNARY_OPCODE_Y1 = 8, + FSINGLE_ADD1_RRR_0_OPCODE_X0 = 34, + FSINGLE_ADDSUB2_RRR_0_OPCODE_X0 = 35, + FSINGLE_MUL1_RRR_0_OPCODE_X0 = 36, + FSINGLE_MUL2_RRR_0_OPCODE_X0 = 37, + FSINGLE_PACK1_UNARY_OPCODE_X0 = 4, + FSINGLE_PACK1_UNARY_OPCODE_Y0 = 4, + FSINGLE_PACK2_RRR_0_OPCODE_X0 = 38, + FSINGLE_SUB1_RRR_0_OPCODE_X0 = 39, + ICOH_UNARY_OPCODE_X1 = 7, + ILL_UNARY_OPCODE_X1 = 8, + ILL_UNARY_OPCODE_Y1 = 9, + IMM8_OPCODE_X0 = 4, + IMM8_OPCODE_X1 = 3, + INV_UNARY_OPCODE_X1 = 9, + IRET_UNARY_OPCODE_X1 = 10, + JALRP_UNARY_OPCODE_X1 = 11, + JALRP_UNARY_OPCODE_Y1 = 10, + JALR_UNARY_OPCODE_X1 = 12, + JALR_UNARY_OPCODE_Y1 = 11, + JAL_JUMP_OPCODE_X1 = 0, + JRP_UNARY_OPCODE_X1 = 13, + JRP_UNARY_OPCODE_Y1 = 12, + JR_UNARY_OPCODE_X1 = 14, + JR_UNARY_OPCODE_Y1 = 13, + JUMP_OPCODE_X1 = 4, + J_JUMP_OPCODE_X1 = 1, + LD1S_ADD_IMM8_OPCODE_X1 = 7, + LD1S_OPCODE_Y2 = 0, + LD1S_UNARY_OPCODE_X1 = 15, + LD1U_ADD_IMM8_OPCODE_X1 = 8, + LD1U_OPCODE_Y2 = 1, + LD1U_UNARY_OPCODE_X1 = 16, + LD2S_ADD_IMM8_OPCODE_X1 = 9, + LD2S_OPCODE_Y2 = 2, + LD2S_UNARY_OPCODE_X1 = 17, + LD2U_ADD_IMM8_OPCODE_X1 = 10, + LD2U_OPCODE_Y2 = 3, + LD2U_UNARY_OPCODE_X1 = 18, + LD4S_ADD_IMM8_OPCODE_X1 = 11, + LD4S_OPCODE_Y2 = 1, + LD4S_UNARY_OPCODE_X1 = 19, + LD4U_ADD_IMM8_OPCODE_X1 = 12, + LD4U_OPCODE_Y2 = 2, + LD4U_UNARY_OPCODE_X1 = 20, + LDNA_UNARY_OPCODE_X1 = 21, + LDNT1S_ADD_IMM8_OPCODE_X1 = 13, + LDNT1S_UNARY_OPCODE_X1 = 22, + LDNT1U_ADD_IMM8_OPCODE_X1 = 14, + LDNT1U_UNARY_OPCODE_X1 = 23, + LDNT2S_ADD_IMM8_OPCODE_X1 = 15, + LDNT2S_UNARY_OPCODE_X1 = 24, + LDNT2U_ADD_IMM8_OPCODE_X1 = 16, + LDNT2U_UNARY_OPCODE_X1 = 25, + LDNT4S_ADD_IMM8_OPCODE_X1 = 17, + LDNT4S_UNARY_OPCODE_X1 = 26, + LDNT4U_ADD_IMM8_OPCODE_X1 = 18, + LDNT4U_UNARY_OPCODE_X1 = 27, + LDNT_ADD_IMM8_OPCODE_X1 = 19, + LDNT_UNARY_OPCODE_X1 = 28, + LD_ADD_IMM8_OPCODE_X1 = 20, + LD_OPCODE_Y2 = 3, + LD_UNARY_OPCODE_X1 = 29, + LNK_UNARY_OPCODE_X1 = 30, + LNK_UNARY_OPCODE_Y1 = 14, + LWNA_ADD_IMM8_OPCODE_X1 = 21, + MFSPR_IMM8_OPCODE_X1 = 22, + MF_UNARY_OPCODE_X1 = 31, + MM_BF_OPCODE_X0 = 7, + MNZ_RRR_0_OPCODE_X0 = 40, + MNZ_RRR_0_OPCODE_X1 = 26, + MNZ_RRR_4_OPCODE_Y0 = 2, + MNZ_RRR_4_OPCODE_Y1 = 2, + MODE_OPCODE_YA2 = 1, + MODE_OPCODE_YB2 = 2, + MODE_OPCODE_YC2 = 3, + MTSPR_IMM8_OPCODE_X1 = 23, + MULAX_RRR_0_OPCODE_X0 = 41, + MULAX_RRR_3_OPCODE_Y0 = 2, + MULA_HS_HS_RRR_0_OPCODE_X0 = 42, + MULA_HS_HS_RRR_9_OPCODE_Y0 = 0, + MULA_HS_HU_RRR_0_OPCODE_X0 = 43, + MULA_HS_LS_RRR_0_OPCODE_X0 = 44, + MULA_HS_LU_RRR_0_OPCODE_X0 = 45, + MULA_HU_HU_RRR_0_OPCODE_X0 = 46, + MULA_HU_HU_RRR_9_OPCODE_Y0 = 1, + MULA_HU_LS_RRR_0_OPCODE_X0 = 47, + MULA_HU_LU_RRR_0_OPCODE_X0 = 48, + MULA_LS_LS_RRR_0_OPCODE_X0 = 49, + MULA_LS_LS_RRR_9_OPCODE_Y0 = 2, + MULA_LS_LU_RRR_0_OPCODE_X0 = 50, + MULA_LU_LU_RRR_0_OPCODE_X0 = 51, + MULA_LU_LU_RRR_9_OPCODE_Y0 = 3, + MULX_RRR_0_OPCODE_X0 = 52, + MULX_RRR_3_OPCODE_Y0 = 3, + MUL_HS_HS_RRR_0_OPCODE_X0 = 53, + MUL_HS_HS_RRR_8_OPCODE_Y0 = 0, + MUL_HS_HU_RRR_0_OPCODE_X0 = 54, + MUL_HS_LS_RRR_0_OPCODE_X0 = 55, + MUL_HS_LU_RRR_0_OPCODE_X0 = 56, + MUL_HU_HU_RRR_0_OPCODE_X0 = 57, + MUL_HU_HU_RRR_8_OPCODE_Y0 = 1, + MUL_HU_LS_RRR_0_OPCODE_X0 = 58, + MUL_HU_LU_RRR_0_OPCODE_X0 = 59, + MUL_LS_LS_RRR_0_OPCODE_X0 = 60, + MUL_LS_LS_RRR_8_OPCODE_Y0 = 2, + MUL_LS_LU_RRR_0_OPCODE_X0 = 61, + MUL_LU_LU_RRR_0_OPCODE_X0 = 62, + MUL_LU_LU_RRR_8_OPCODE_Y0 = 3, + MZ_RRR_0_OPCODE_X0 = 63, + MZ_RRR_0_OPCODE_X1 = 27, + MZ_RRR_4_OPCODE_Y0 = 3, + MZ_RRR_4_OPCODE_Y1 = 3, + NAP_UNARY_OPCODE_X1 = 32, + NOP_UNARY_OPCODE_X0 = 5, + NOP_UNARY_OPCODE_X1 = 33, + NOP_UNARY_OPCODE_Y0 = 5, + NOP_UNARY_OPCODE_Y1 = 15, + NOR_RRR_0_OPCODE_X0 = 64, + NOR_RRR_0_OPCODE_X1 = 28, + NOR_RRR_5_OPCODE_Y0 = 1, + NOR_RRR_5_OPCODE_Y1 = 1, + ORI_IMM8_OPCODE_X0 = 7, + ORI_IMM8_OPCODE_X1 = 24, + OR_RRR_0_OPCODE_X0 = 65, + OR_RRR_0_OPCODE_X1 = 29, + OR_RRR_5_OPCODE_Y0 = 2, + OR_RRR_5_OPCODE_Y1 = 2, + PCNT_UNARY_OPCODE_X0 = 6, + PCNT_UNARY_OPCODE_Y0 = 6, + REVBITS_UNARY_OPCODE_X0 = 7, + REVBITS_UNARY_OPCODE_Y0 = 7, + REVBYTES_UNARY_OPCODE_X0 = 8, + REVBYTES_UNARY_OPCODE_Y0 = 8, + ROTLI_SHIFT_OPCODE_X0 = 1, + ROTLI_SHIFT_OPCODE_X1 = 1, + ROTLI_SHIFT_OPCODE_Y0 = 0, + ROTLI_SHIFT_OPCODE_Y1 = 0, + ROTL_RRR_0_OPCODE_X0 = 66, + ROTL_RRR_0_OPCODE_X1 = 30, + ROTL_RRR_6_OPCODE_Y0 = 0, + ROTL_RRR_6_OPCODE_Y1 = 0, + RRR_0_OPCODE_X0 = 5, + RRR_0_OPCODE_X1 = 5, + RRR_0_OPCODE_Y0 = 5, + RRR_0_OPCODE_Y1 = 6, + RRR_1_OPCODE_Y0 = 6, + RRR_1_OPCODE_Y1 = 7, + RRR_2_OPCODE_Y0 = 7, + RRR_2_OPCODE_Y1 = 8, + RRR_3_OPCODE_Y0 = 8, + RRR_3_OPCODE_Y1 = 9, + RRR_4_OPCODE_Y0 = 9, + RRR_4_OPCODE_Y1 = 10, + RRR_5_OPCODE_Y0 = 10, + RRR_5_OPCODE_Y1 = 11, + RRR_6_OPCODE_Y0 = 11, + RRR_6_OPCODE_Y1 = 12, + RRR_7_OPCODE_Y0 = 12, + RRR_7_OPCODE_Y1 = 13, + RRR_8_OPCODE_Y0 = 13, + RRR_9_OPCODE_Y0 = 14, + SHIFT_OPCODE_X0 = 6, + SHIFT_OPCODE_X1 = 6, + SHIFT_OPCODE_Y0 = 15, + SHIFT_OPCODE_Y1 = 14, + SHL16INSLI_OPCODE_X0 = 7, + SHL16INSLI_OPCODE_X1 = 7, + SHL1ADDX_RRR_0_OPCODE_X0 = 67, + SHL1ADDX_RRR_0_OPCODE_X1 = 31, + SHL1ADDX_RRR_7_OPCODE_Y0 = 1, + SHL1ADDX_RRR_7_OPCODE_Y1 = 1, + SHL1ADD_RRR_0_OPCODE_X0 = 68, + SHL1ADD_RRR_0_OPCODE_X1 = 32, + SHL1ADD_RRR_1_OPCODE_Y0 = 0, + SHL1ADD_RRR_1_OPCODE_Y1 = 0, + SHL2ADDX_RRR_0_OPCODE_X0 = 69, + SHL2ADDX_RRR_0_OPCODE_X1 = 33, + SHL2ADDX_RRR_7_OPCODE_Y0 = 2, + SHL2ADDX_RRR_7_OPCODE_Y1 = 2, + SHL2ADD_RRR_0_OPCODE_X0 = 70, + SHL2ADD_RRR_0_OPCODE_X1 = 34, + SHL2ADD_RRR_1_OPCODE_Y0 = 1, + SHL2ADD_RRR_1_OPCODE_Y1 = 1, + SHL3ADDX_RRR_0_OPCODE_X0 = 71, + SHL3ADDX_RRR_0_OPCODE_X1 = 35, + SHL3ADDX_RRR_7_OPCODE_Y0 = 3, + SHL3ADDX_RRR_7_OPCODE_Y1 = 3, + SHL3ADD_RRR_0_OPCODE_X0 = 72, + SHL3ADD_RRR_0_OPCODE_X1 = 36, + SHL3ADD_RRR_1_OPCODE_Y0 = 2, + SHL3ADD_RRR_1_OPCODE_Y1 = 2, + SHLI_SHIFT_OPCODE_X0 = 2, + SHLI_SHIFT_OPCODE_X1 = 2, + SHLI_SHIFT_OPCODE_Y0 = 1, + SHLI_SHIFT_OPCODE_Y1 = 1, + SHLXI_SHIFT_OPCODE_X0 = 3, + SHLXI_SHIFT_OPCODE_X1 = 3, + SHLX_RRR_0_OPCODE_X0 = 73, + SHLX_RRR_0_OPCODE_X1 = 37, + SHL_RRR_0_OPCODE_X0 = 74, + SHL_RRR_0_OPCODE_X1 = 38, + SHL_RRR_6_OPCODE_Y0 = 1, + SHL_RRR_6_OPCODE_Y1 = 1, + SHRSI_SHIFT_OPCODE_X0 = 4, + SHRSI_SHIFT_OPCODE_X1 = 4, + SHRSI_SHIFT_OPCODE_Y0 = 2, + SHRSI_SHIFT_OPCODE_Y1 = 2, + SHRS_RRR_0_OPCODE_X0 = 75, + SHRS_RRR_0_OPCODE_X1 = 39, + SHRS_RRR_6_OPCODE_Y0 = 2, + SHRS_RRR_6_OPCODE_Y1 = 2, + SHRUI_SHIFT_OPCODE_X0 = 5, + SHRUI_SHIFT_OPCODE_X1 = 5, + SHRUI_SHIFT_OPCODE_Y0 = 3, + SHRUI_SHIFT_OPCODE_Y1 = 3, + SHRUXI_SHIFT_OPCODE_X0 = 6, + SHRUXI_SHIFT_OPCODE_X1 = 6, + SHRUX_RRR_0_OPCODE_X0 = 76, + SHRUX_RRR_0_OPCODE_X1 = 40, + SHRU_RRR_0_OPCODE_X0 = 77, + SHRU_RRR_0_OPCODE_X1 = 41, + SHRU_RRR_6_OPCODE_Y0 = 3, + SHRU_RRR_6_OPCODE_Y1 = 3, + SHUFFLEBYTES_RRR_0_OPCODE_X0 = 78, + ST1_ADD_IMM8_OPCODE_X1 = 25, + ST1_OPCODE_Y2 = 0, + ST1_RRR_0_OPCODE_X1 = 42, + ST2_ADD_IMM8_OPCODE_X1 = 26, + ST2_OPCODE_Y2 = 1, + ST2_RRR_0_OPCODE_X1 = 43, + ST4_ADD_IMM8_OPCODE_X1 = 27, + ST4_OPCODE_Y2 = 2, + ST4_RRR_0_OPCODE_X1 = 44, + STNT1_ADD_IMM8_OPCODE_X1 = 28, + STNT1_RRR_0_OPCODE_X1 = 45, + STNT2_ADD_IMM8_OPCODE_X1 = 29, + STNT2_RRR_0_OPCODE_X1 = 46, + STNT4_ADD_IMM8_OPCODE_X1 = 30, + STNT4_RRR_0_OPCODE_X1 = 47, + STNT_ADD_IMM8_OPCODE_X1 = 31, + STNT_RRR_0_OPCODE_X1 = 48, + ST_ADD_IMM8_OPCODE_X1 = 32, + ST_OPCODE_Y2 = 3, + ST_RRR_0_OPCODE_X1 = 49, + SUBXSC_RRR_0_OPCODE_X0 = 79, + SUBXSC_RRR_0_OPCODE_X1 = 50, + SUBX_RRR_0_OPCODE_X0 = 80, + SUBX_RRR_0_OPCODE_X1 = 51, + SUBX_RRR_0_OPCODE_Y0 = 2, + SUBX_RRR_0_OPCODE_Y1 = 2, + SUB_RRR_0_OPCODE_X0 = 81, + SUB_RRR_0_OPCODE_X1 = 52, + SUB_RRR_0_OPCODE_Y0 = 3, + SUB_RRR_0_OPCODE_Y1 = 3, + SWINT0_UNARY_OPCODE_X1 = 34, + SWINT1_UNARY_OPCODE_X1 = 35, + SWINT2_UNARY_OPCODE_X1 = 36, + SWINT3_UNARY_OPCODE_X1 = 37, + TBLIDXB0_UNARY_OPCODE_X0 = 9, + TBLIDXB0_UNARY_OPCODE_Y0 = 9, + TBLIDXB1_UNARY_OPCODE_X0 = 10, + TBLIDXB1_UNARY_OPCODE_Y0 = 10, + TBLIDXB2_UNARY_OPCODE_X0 = 11, + TBLIDXB2_UNARY_OPCODE_Y0 = 11, + TBLIDXB3_UNARY_OPCODE_X0 = 12, + TBLIDXB3_UNARY_OPCODE_Y0 = 12, + UNARY_RRR_0_OPCODE_X0 = 82, + UNARY_RRR_0_OPCODE_X1 = 53, + UNARY_RRR_1_OPCODE_Y0 = 3, + UNARY_RRR_1_OPCODE_Y1 = 3, + V1ADDI_IMM8_OPCODE_X0 = 8, + V1ADDI_IMM8_OPCODE_X1 = 33, + V1ADDUC_RRR_0_OPCODE_X0 = 83, + V1ADDUC_RRR_0_OPCODE_X1 = 54, + V1ADD_RRR_0_OPCODE_X0 = 84, + V1ADD_RRR_0_OPCODE_X1 = 55, + V1ADIFFU_RRR_0_OPCODE_X0 = 85, + V1AVGU_RRR_0_OPCODE_X0 = 86, + V1CMPEQI_IMM8_OPCODE_X0 = 9, + V1CMPEQI_IMM8_OPCODE_X1 = 34, + V1CMPEQ_RRR_0_OPCODE_X0 = 87, + V1CMPEQ_RRR_0_OPCODE_X1 = 56, + V1CMPLES_RRR_0_OPCODE_X0 = 88, + V1CMPLES_RRR_0_OPCODE_X1 = 57, + V1CMPLEU_RRR_0_OPCODE_X0 = 89, + V1CMPLEU_RRR_0_OPCODE_X1 = 58, + V1CMPLTSI_IMM8_OPCODE_X0 = 10, + V1CMPLTSI_IMM8_OPCODE_X1 = 35, + V1CMPLTS_RRR_0_OPCODE_X0 = 90, + V1CMPLTS_RRR_0_OPCODE_X1 = 59, + V1CMPLTUI_IMM8_OPCODE_X0 = 11, + V1CMPLTUI_IMM8_OPCODE_X1 = 36, + V1CMPLTU_RRR_0_OPCODE_X0 = 91, + V1CMPLTU_RRR_0_OPCODE_X1 = 60, + V1CMPNE_RRR_0_OPCODE_X0 = 92, + V1CMPNE_RRR_0_OPCODE_X1 = 61, + V1DDOTPUA_RRR_0_OPCODE_X0 = 161, + V1DDOTPUSA_RRR_0_OPCODE_X0 = 93, + V1DDOTPUS_RRR_0_OPCODE_X0 = 94, + V1DDOTPU_RRR_0_OPCODE_X0 = 162, + V1DOTPA_RRR_0_OPCODE_X0 = 95, + V1DOTPUA_RRR_0_OPCODE_X0 = 163, + V1DOTPUSA_RRR_0_OPCODE_X0 = 96, + V1DOTPUS_RRR_0_OPCODE_X0 = 97, + V1DOTPU_RRR_0_OPCODE_X0 = 164, + V1DOTP_RRR_0_OPCODE_X0 = 98, + V1INT_H_RRR_0_OPCODE_X0 = 99, + V1INT_H_RRR_0_OPCODE_X1 = 62, + V1INT_L_RRR_0_OPCODE_X0 = 100, + V1INT_L_RRR_0_OPCODE_X1 = 63, + V1MAXUI_IMM8_OPCODE_X0 = 12, + V1MAXUI_IMM8_OPCODE_X1 = 37, + V1MAXU_RRR_0_OPCODE_X0 = 101, + V1MAXU_RRR_0_OPCODE_X1 = 64, + V1MINUI_IMM8_OPCODE_X0 = 13, + V1MINUI_IMM8_OPCODE_X1 = 38, + V1MINU_RRR_0_OPCODE_X0 = 102, + V1MINU_RRR_0_OPCODE_X1 = 65, + V1MNZ_RRR_0_OPCODE_X0 = 103, + V1MNZ_RRR_0_OPCODE_X1 = 66, + V1MULTU_RRR_0_OPCODE_X0 = 104, + V1MULUS_RRR_0_OPCODE_X0 = 105, + V1MULU_RRR_0_OPCODE_X0 = 106, + V1MZ_RRR_0_OPCODE_X0 = 107, + V1MZ_RRR_0_OPCODE_X1 = 67, + V1SADAU_RRR_0_OPCODE_X0 = 108, + V1SADU_RRR_0_OPCODE_X0 = 109, + V1SHLI_SHIFT_OPCODE_X0 = 7, + V1SHLI_SHIFT_OPCODE_X1 = 7, + V1SHL_RRR_0_OPCODE_X0 = 110, + V1SHL_RRR_0_OPCODE_X1 = 68, + V1SHRSI_SHIFT_OPCODE_X0 = 8, + V1SHRSI_SHIFT_OPCODE_X1 = 8, + V1SHRS_RRR_0_OPCODE_X0 = 111, + V1SHRS_RRR_0_OPCODE_X1 = 69, + V1SHRUI_SHIFT_OPCODE_X0 = 9, + V1SHRUI_SHIFT_OPCODE_X1 = 9, + V1SHRU_RRR_0_OPCODE_X0 = 112, + V1SHRU_RRR_0_OPCODE_X1 = 70, + V1SUBUC_RRR_0_OPCODE_X0 = 113, + V1SUBUC_RRR_0_OPCODE_X1 = 71, + V1SUB_RRR_0_OPCODE_X0 = 114, + V1SUB_RRR_0_OPCODE_X1 = 72, + V2ADDI_IMM8_OPCODE_X0 = 14, + V2ADDI_IMM8_OPCODE_X1 = 39, + V2ADDSC_RRR_0_OPCODE_X0 = 115, + V2ADDSC_RRR_0_OPCODE_X1 = 73, + V2ADD_RRR_0_OPCODE_X0 = 116, + V2ADD_RRR_0_OPCODE_X1 = 74, + V2ADIFFS_RRR_0_OPCODE_X0 = 117, + V2AVGS_RRR_0_OPCODE_X0 = 118, + V2CMPEQI_IMM8_OPCODE_X0 = 15, + V2CMPEQI_IMM8_OPCODE_X1 = 40, + V2CMPEQ_RRR_0_OPCODE_X0 = 119, + V2CMPEQ_RRR_0_OPCODE_X1 = 75, + V2CMPLES_RRR_0_OPCODE_X0 = 120, + V2CMPLES_RRR_0_OPCODE_X1 = 76, + V2CMPLEU_RRR_0_OPCODE_X0 = 121, + V2CMPLEU_RRR_0_OPCODE_X1 = 77, + V2CMPLTSI_IMM8_OPCODE_X0 = 16, + V2CMPLTSI_IMM8_OPCODE_X1 = 41, + V2CMPLTS_RRR_0_OPCODE_X0 = 122, + V2CMPLTS_RRR_0_OPCODE_X1 = 78, + V2CMPLTUI_IMM8_OPCODE_X0 = 17, + V2CMPLTUI_IMM8_OPCODE_X1 = 42, + V2CMPLTU_RRR_0_OPCODE_X0 = 123, + V2CMPLTU_RRR_0_OPCODE_X1 = 79, + V2CMPNE_RRR_0_OPCODE_X0 = 124, + V2CMPNE_RRR_0_OPCODE_X1 = 80, + V2DOTPA_RRR_0_OPCODE_X0 = 125, + V2DOTP_RRR_0_OPCODE_X0 = 126, + V2INT_H_RRR_0_OPCODE_X0 = 127, + V2INT_H_RRR_0_OPCODE_X1 = 81, + V2INT_L_RRR_0_OPCODE_X0 = 128, + V2INT_L_RRR_0_OPCODE_X1 = 82, + V2MAXSI_IMM8_OPCODE_X0 = 18, + V2MAXSI_IMM8_OPCODE_X1 = 43, + V2MAXS_RRR_0_OPCODE_X0 = 129, + V2MAXS_RRR_0_OPCODE_X1 = 83, + V2MINSI_IMM8_OPCODE_X0 = 19, + V2MINSI_IMM8_OPCODE_X1 = 44, + V2MINS_RRR_0_OPCODE_X0 = 130, + V2MINS_RRR_0_OPCODE_X1 = 84, + V2MNZ_RRR_0_OPCODE_X0 = 131, + V2MNZ_RRR_0_OPCODE_X1 = 85, + V2MULFSC_RRR_0_OPCODE_X0 = 132, + V2MULS_RRR_0_OPCODE_X0 = 133, + V2MULTS_RRR_0_OPCODE_X0 = 134, + V2MZ_RRR_0_OPCODE_X0 = 135, + V2MZ_RRR_0_OPCODE_X1 = 86, + V2PACKH_RRR_0_OPCODE_X0 = 136, + V2PACKH_RRR_0_OPCODE_X1 = 87, + V2PACKL_RRR_0_OPCODE_X0 = 137, + V2PACKL_RRR_0_OPCODE_X1 = 88, + V2PACKUC_RRR_0_OPCODE_X0 = 138, + V2PACKUC_RRR_0_OPCODE_X1 = 89, + V2SADAS_RRR_0_OPCODE_X0 = 139, + V2SADAU_RRR_0_OPCODE_X0 = 140, + V2SADS_RRR_0_OPCODE_X0 = 141, + V2SADU_RRR_0_OPCODE_X0 = 142, + V2SHLI_SHIFT_OPCODE_X0 = 10, + V2SHLI_SHIFT_OPCODE_X1 = 10, + V2SHLSC_RRR_0_OPCODE_X0 = 143, + V2SHLSC_RRR_0_OPCODE_X1 = 90, + V2SHL_RRR_0_OPCODE_X0 = 144, + V2SHL_RRR_0_OPCODE_X1 = 91, + V2SHRSI_SHIFT_OPCODE_X0 = 11, + V2SHRSI_SHIFT_OPCODE_X1 = 11, + V2SHRS_RRR_0_OPCODE_X0 = 145, + V2SHRS_RRR_0_OPCODE_X1 = 92, + V2SHRUI_SHIFT_OPCODE_X0 = 12, + V2SHRUI_SHIFT_OPCODE_X1 = 12, + V2SHRU_RRR_0_OPCODE_X0 = 146, + V2SHRU_RRR_0_OPCODE_X1 = 93, + V2SUBSC_RRR_0_OPCODE_X0 = 147, + V2SUBSC_RRR_0_OPCODE_X1 = 94, + V2SUB_RRR_0_OPCODE_X0 = 148, + V2SUB_RRR_0_OPCODE_X1 = 95, + V4ADDSC_RRR_0_OPCODE_X0 = 149, + V4ADDSC_RRR_0_OPCODE_X1 = 96, + V4ADD_RRR_0_OPCODE_X0 = 150, + V4ADD_RRR_0_OPCODE_X1 = 97, + V4INT_H_RRR_0_OPCODE_X0 = 151, + V4INT_H_RRR_0_OPCODE_X1 = 98, + V4INT_L_RRR_0_OPCODE_X0 = 152, + V4INT_L_RRR_0_OPCODE_X1 = 99, + V4PACKSC_RRR_0_OPCODE_X0 = 153, + V4PACKSC_RRR_0_OPCODE_X1 = 100, + V4SHLSC_RRR_0_OPCODE_X0 = 154, + V4SHLSC_RRR_0_OPCODE_X1 = 101, + V4SHL_RRR_0_OPCODE_X0 = 155, + V4SHL_RRR_0_OPCODE_X1 = 102, + V4SHRS_RRR_0_OPCODE_X0 = 156, + V4SHRS_RRR_0_OPCODE_X1 = 103, + V4SHRU_RRR_0_OPCODE_X0 = 157, + V4SHRU_RRR_0_OPCODE_X1 = 104, + V4SUBSC_RRR_0_OPCODE_X0 = 158, + V4SUBSC_RRR_0_OPCODE_X1 = 105, + V4SUB_RRR_0_OPCODE_X0 = 159, + V4SUB_RRR_0_OPCODE_X1 = 106, + WH64_UNARY_OPCODE_X1 = 38, + XORI_IMM8_OPCODE_X0 = 20, + XORI_IMM8_OPCODE_X1 = 45, + XOR_RRR_0_OPCODE_X0 = 160, + XOR_RRR_0_OPCODE_X1 = 107, + XOR_RRR_5_OPCODE_Y0 = 3, + XOR_RRR_5_OPCODE_Y1 = 3 }; #endif /* !_TILE_OPCODE_CONSTANTS_H */ diff --git a/arch/tile/include/asm/page.h b/arch/tile/include/asm/page.h index 3eb53525bf9d..db93518fac03 100644 --- a/arch/tile/include/asm/page.h +++ b/arch/tile/include/asm/page.h @@ -16,7 +16,8 @@ #define _ASM_TILE_PAGE_H #include <linux/const.h> -#include <hv/pagesize.h> +#include <hv/hypervisor.h> +#include <arch/chip.h> /* PAGE_SHIFT and HPAGE_SHIFT determine the page sizes. */ #define PAGE_SHIFT HV_LOG2_PAGE_SIZE_SMALL @@ -28,8 +29,6 @@ #define PAGE_MASK (~(PAGE_SIZE - 1)) #define HPAGE_MASK (~(HPAGE_SIZE - 1)) -#ifdef __KERNEL__ - /* * If the Kconfig doesn't specify, set a maximum zone order that * is enough so that we can create huge pages from small pages given @@ -39,9 +38,6 @@ #define CONFIG_FORCE_MAX_ZONEORDER (HPAGE_SHIFT - PAGE_SHIFT + 1) #endif -#include <hv/hypervisor.h> -#include <arch/chip.h> - #ifndef __ASSEMBLY__ #include <linux/types.h> @@ -91,6 +87,10 @@ typedef struct page *pgtable_t; /* Must be a macro since it is used to create constants. */ #define __pgprot(val) hv_pte(val) +/* Rarely-used initializers, typically with a "zero" value. */ +#define __pte(x) hv_pte(x) +#define __pgd(x) hv_pte(x) + static inline u64 pgprot_val(pgprot_t pgprot) { return hv_pte_val(pgprot); @@ -110,6 +110,8 @@ static inline u64 pgd_val(pgd_t pgd) typedef HV_PTE pmd_t; +#define __pmd(x) hv_pte(x) + static inline u64 pmd_val(pmd_t pmd) { return hv_pte_val(pmd); @@ -318,7 +320,7 @@ static inline int pfn_valid(unsigned long pfn) /* Provide as macros since these require some other headers included. */ #define page_to_pa(page) ((phys_addr_t)(page_to_pfn(page)) << PAGE_SHIFT) -#define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn(kaddr)) +#define virt_to_page(kaddr) pfn_to_page(kaddr_to_pfn((void *)(kaddr))) #define page_to_virt(page) pfn_to_kaddr(page_to_pfn(page)) struct mm_struct; @@ -331,6 +333,4 @@ extern pte_t *virt_to_pte(struct mm_struct *mm, unsigned long addr); #include <asm-generic/memory_model.h> -#endif /* __KERNEL__ */ - #endif /* _ASM_TILE_PAGE_H */ diff --git a/arch/tile/include/asm/parport.h b/arch/tile/include/asm/parport.h new file mode 100644 index 000000000000..cf252af64590 --- /dev/null +++ b/arch/tile/include/asm/parport.h @@ -0,0 +1 @@ +#include <asm-generic/parport.h> diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index c3fc458a0d32..7f03cefed1b9 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -46,7 +46,8 @@ struct pci_controller { */ #define PCI_DMA_BUS_IS_PHYS 1 -int __init tile_pci_init(void); +int __devinit tile_pci_init(void); +int __devinit pcibios_init(void); void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} diff --git a/arch/tile/include/asm/pgtable_64.h b/arch/tile/include/asm/pgtable_64.h new file mode 100644 index 000000000000..fd80328523b4 --- /dev/null +++ b/arch/tile/include/asm/pgtable_64.h @@ -0,0 +1,175 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + */ + +#ifndef _ASM_TILE_PGTABLE_64_H +#define _ASM_TILE_PGTABLE_64_H + +/* The level-0 page table breaks the address space into 32-bit chunks. */ +#define PGDIR_SHIFT HV_LOG2_L1_SPAN +#define PGDIR_SIZE HV_L1_SPAN +#define PGDIR_MASK (~(PGDIR_SIZE-1)) +#define PTRS_PER_PGD HV_L0_ENTRIES +#define SIZEOF_PGD (PTRS_PER_PGD * sizeof(pgd_t)) + +/* + * The level-1 index is defined by the huge page size. A PMD is composed + * of PTRS_PER_PMD pgd_t's and is the middle level of the page table. + */ +#define PMD_SHIFT HV_LOG2_PAGE_SIZE_LARGE +#define PMD_SIZE HV_PAGE_SIZE_LARGE +#define PMD_MASK (~(PMD_SIZE-1)) +#define PTRS_PER_PMD (1 << (PGDIR_SHIFT - PMD_SHIFT)) +#define SIZEOF_PMD (PTRS_PER_PMD * sizeof(pmd_t)) + +/* + * The level-2 index is defined by the difference between the huge + * page size and the normal page size. A PTE is composed of + * PTRS_PER_PTE pte_t's and is the bottom level of the page table. + * Note that the hypervisor docs use PTE for what we call pte_t, so + * this nomenclature is somewhat confusing. + */ +#define PTRS_PER_PTE (1 << (HV_LOG2_PAGE_SIZE_LARGE - HV_LOG2_PAGE_SIZE_SMALL)) +#define SIZEOF_PTE (PTRS_PER_PTE * sizeof(pte_t)) + +/* + * Align the vmalloc area to an L2 page table, and leave a guard page + * at the beginning and end. The vmalloc code also puts in an internal + * guard page between each allocation. + */ +#define _VMALLOC_END HUGE_VMAP_BASE +#define VMALLOC_END (_VMALLOC_END - PAGE_SIZE) +#define VMALLOC_START (_VMALLOC_START + PAGE_SIZE) + +#define HUGE_VMAP_END (HUGE_VMAP_BASE + PGDIR_SIZE) + +#ifndef __ASSEMBLY__ + +/* We have no pud since we are a three-level page table. */ +#include <asm-generic/pgtable-nopud.h> + +static inline int pud_none(pud_t pud) +{ + return pud_val(pud) == 0; +} + +static inline int pud_present(pud_t pud) +{ + return pud_val(pud) & _PAGE_PRESENT; +} + +#define pmd_ERROR(e) \ + pr_err("%s:%d: bad pmd 0x%016llx.\n", __FILE__, __LINE__, pmd_val(e)) + +static inline void pud_clear(pud_t *pudp) +{ + __pte_clear(&pudp->pgd); +} + +static inline int pud_bad(pud_t pud) +{ + return ((pud_val(pud) & _PAGE_ALL) != _PAGE_TABLE); +} + +/* Return the page-table frame number (ptfn) that a pud_t points at. */ +#define pud_ptfn(pud) hv_pte_get_ptfn((pud).pgd) + +/* + * A given kernel pud_t maps to a kernel pmd_t table at a specific + * virtual address. Since kernel pmd_t tables can be aligned at + * sub-page granularity, this macro can return non-page-aligned + * pointers, despite its name. + */ +#define pud_page_vaddr(pud) \ + (__va((phys_addr_t)pud_ptfn(pud) << HV_LOG2_PAGE_TABLE_ALIGN)) + +/* + * A pud_t points to a pmd_t array. Since we can have multiple per + * page, we don't have a one-to-one mapping of pud_t's to pages. + */ +#define pud_page(pud) pfn_to_page(HV_PTFN_TO_PFN(pud_ptfn(pud))) + +static inline unsigned long pud_index(unsigned long address) +{ + return (address >> PUD_SHIFT) & (PTRS_PER_PUD - 1); +} + +#define pmd_offset(pud, address) \ + ((pmd_t *)pud_page_vaddr(*(pud)) + pmd_index(address)) + +static inline void __set_pmd(pmd_t *pmdp, pmd_t pmdval) +{ + set_pte(pmdp, pmdval); +} + +/* Create a pmd from a PTFN and pgprot. */ +static inline pmd_t ptfn_pmd(unsigned long ptfn, pgprot_t prot) +{ + return hv_pte_set_ptfn(prot, ptfn); +} + +/* Return the page-table frame number (ptfn) that a pmd_t points at. */ +static inline unsigned long pmd_ptfn(pmd_t pmd) +{ + return hv_pte_get_ptfn(pmd); +} + +static inline void pmd_clear(pmd_t *pmdp) +{ + __pte_clear(pmdp); +} + +/* Normalize an address to having the correct high bits set. */ +#define pgd_addr_normalize pgd_addr_normalize +static inline unsigned long pgd_addr_normalize(unsigned long addr) +{ + return ((long)addr << (CHIP_WORD_SIZE() - CHIP_VA_WIDTH())) >> + (CHIP_WORD_SIZE() - CHIP_VA_WIDTH()); +} + +/* We don't define any pgds for these addresses. */ +static inline int pgd_addr_invalid(unsigned long addr) +{ + return addr >= MEM_HV_START || + (addr > MEM_LOW_END && addr < MEM_HIGH_START); +} + +/* + * Use atomic instructions to provide atomicity against the hypervisor. + */ +#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG +static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ + return (__insn_fetchand(&ptep->val, ~HV_PTE_ACCESSED) >> + HV_PTE_INDEX_ACCESSED) & 0x1; +} + +#define __HAVE_ARCH_PTEP_SET_WRPROTECT +static inline void ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + __insn_fetchand(&ptep->val, ~HV_PTE_WRITABLE); +} + +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +static inline pte_t ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return hv_pte(__insn_exch(&ptep->val, 0UL)); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_TILE_PGTABLE_64_H */ diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h index e6889474038a..34c1e01ffb5e 100644 --- a/arch/tile/include/asm/processor.h +++ b/arch/tile/include/asm/processor.h @@ -215,6 +215,8 @@ static inline void release_thread(struct task_struct *dead_task) extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); +extern int do_work_pending(struct pt_regs *regs, u32 flags); + /* * Return saved (kernel) PC of a blocked thread. @@ -255,10 +257,6 @@ static inline void cpu_relax(void) barrier(); } -struct siginfo; -extern void arch_coredump_signal(struct siginfo *, struct pt_regs *); -#define arch_coredump_signal arch_coredump_signal - /* Info on this processor (see fs/proc/cpuinfo.c) */ struct seq_operations; extern const struct seq_operations cpuinfo_op; @@ -269,9 +267,6 @@ extern char chip_model[64]; /* Data on which physical memory controller corresponds to which NUMA node. */ extern int node_controller[]; -/* Do we dump information to the console when a user application crashes? */ -extern int show_crashinfo; - #if CHIP_HAS_CBOX_HOME_MAP() /* Does the heap allocator return hash-for-home pages by default? */ extern int hash_default; diff --git a/arch/tile/include/asm/serial.h b/arch/tile/include/asm/serial.h new file mode 100644 index 000000000000..a0cb0caff152 --- /dev/null +++ b/arch/tile/include/asm/serial.h @@ -0,0 +1 @@ +#include <asm-generic/serial.h> diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h index 81d92a45cd4b..1e1e616783eb 100644 --- a/arch/tile/include/asm/signal.h +++ b/arch/tile/include/asm/signal.h @@ -28,6 +28,10 @@ struct pt_regs; int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); int setup_sigcontext(struct sigcontext __user *, struct pt_regs *); void do_signal(struct pt_regs *regs); +void signal_fault(const char *type, struct pt_regs *, + void __user *frame, int sig); +void trace_unhandled_signal(const char *type, struct pt_regs *regs, + unsigned long address, int signo); #endif #endif /* _ASM_TILE_SIGNAL_H */ diff --git a/arch/tile/include/asm/spinlock_64.h b/arch/tile/include/asm/spinlock_64.h new file mode 100644 index 000000000000..72be5904e020 --- /dev/null +++ b/arch/tile/include/asm/spinlock_64.h @@ -0,0 +1,161 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * 64-bit SMP ticket spinlocks, allowing only a single CPU anywhere + * (the type definitions are in asm/spinlock_types.h) + */ + +#ifndef _ASM_TILE_SPINLOCK_64_H +#define _ASM_TILE_SPINLOCK_64_H + +/* Shifts and masks for the various fields in "lock". */ +#define __ARCH_SPIN_CURRENT_SHIFT 17 +#define __ARCH_SPIN_NEXT_MASK 0x7fff +#define __ARCH_SPIN_NEXT_OVERFLOW 0x8000 + +/* + * Return the "current" portion of a ticket lock value, + * i.e. the number that currently owns the lock. + */ +static inline int arch_spin_current(u32 val) +{ + return val >> __ARCH_SPIN_CURRENT_SHIFT; +} + +/* + * Return the "next" portion of a ticket lock value, + * i.e. the number that the next task to try to acquire the lock will get. + */ +static inline int arch_spin_next(u32 val) +{ + return val & __ARCH_SPIN_NEXT_MASK; +} + +/* The lock is locked if a task would have to wait to get it. */ +static inline int arch_spin_is_locked(arch_spinlock_t *lock) +{ + u32 val = lock->lock; + return arch_spin_current(val) != arch_spin_next(val); +} + +/* Bump the current ticket so the next task owns the lock. */ +static inline void arch_spin_unlock(arch_spinlock_t *lock) +{ + wmb(); /* guarantee anything modified under the lock is visible */ + __insn_fetchadd4(&lock->lock, 1U << __ARCH_SPIN_CURRENT_SHIFT); +} + +void arch_spin_unlock_wait(arch_spinlock_t *lock); + +void arch_spin_lock_slow(arch_spinlock_t *lock, u32 val); + +/* Grab the "next" ticket number and bump it atomically. + * If the current ticket is not ours, go to the slow path. + * We also take the slow path if the "next" value overflows. + */ +static inline void arch_spin_lock(arch_spinlock_t *lock) +{ + u32 val = __insn_fetchadd4(&lock->lock, 1); + u32 ticket = val & (__ARCH_SPIN_NEXT_MASK | __ARCH_SPIN_NEXT_OVERFLOW); + if (unlikely(arch_spin_current(val) != ticket)) + arch_spin_lock_slow(lock, ticket); +} + +/* Try to get the lock, and return whether we succeeded. */ +int arch_spin_trylock(arch_spinlock_t *lock); + +/* We cannot take an interrupt after getting a ticket, so don't enable them. */ +#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock) + +/* + * Read-write spinlocks, allowing multiple readers + * but only one writer. + * + * We use fetchadd() for readers, and fetchor() with the sign bit + * for writers. + */ + +#define __WRITE_LOCK_BIT (1 << 31) + +static inline int arch_write_val_locked(int val) +{ + return val < 0; /* Optimize "val & __WRITE_LOCK_BIT". */ +} + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +static inline int arch_read_can_lock(arch_rwlock_t *rw) +{ + return !arch_write_val_locked(rw->lock); +} + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +static inline int arch_write_can_lock(arch_rwlock_t *rw) +{ + return rw->lock == 0; +} + +extern void __read_lock_failed(arch_rwlock_t *rw); + +static inline void arch_read_lock(arch_rwlock_t *rw) +{ + u32 val = __insn_fetchaddgez4(&rw->lock, 1); + if (unlikely(arch_write_val_locked(val))) + __read_lock_failed(rw); +} + +extern void __write_lock_failed(arch_rwlock_t *rw, u32 val); + +static inline void arch_write_lock(arch_rwlock_t *rw) +{ + u32 val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); + if (unlikely(val != 0)) + __write_lock_failed(rw, val); +} + +static inline void arch_read_unlock(arch_rwlock_t *rw) +{ + __insn_mf(); + __insn_fetchadd4(&rw->lock, -1); +} + +static inline void arch_write_unlock(arch_rwlock_t *rw) +{ + __insn_mf(); + rw->lock = 0; +} + +static inline int arch_read_trylock(arch_rwlock_t *rw) +{ + return !arch_write_val_locked(__insn_fetchaddgez4(&rw->lock, 1)); +} + +static inline int arch_write_trylock(arch_rwlock_t *rw) +{ + u32 val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); + if (likely(val == 0)) + return 1; + if (!arch_write_val_locked(val)) + __insn_fetchand4(&rw->lock, ~__WRITE_LOCK_BIT); + return 0; +} + +#define arch_read_lock_flags(lock, flags) arch_read_lock(lock) +#define arch_write_lock_flags(lock, flags) arch_write_lock(lock) + +#endif /* _ASM_TILE_SPINLOCK_64_H */ diff --git a/arch/tile/include/asm/stat.h b/arch/tile/include/asm/stat.h index b16e5db8f0e7..c0db34d56be3 100644 --- a/arch/tile/include/asm/stat.h +++ b/arch/tile/include/asm/stat.h @@ -1,4 +1,4 @@ -#ifdef CONFIG_COMPAT +#if defined(__KERNEL__) && defined(CONFIG_COMPAT) #define __ARCH_WANT_STAT64 /* Used for compat_sys_stat64() etc. */ #endif #include <asm-generic/stat.h> diff --git a/arch/tile/include/asm/swab.h b/arch/tile/include/asm/swab.h index 25c686a00f1d..7c37b38f6c8d 100644 --- a/arch/tile/include/asm/swab.h +++ b/arch/tile/include/asm/swab.h @@ -18,12 +18,6 @@ /* Tile gcc is always >= 4.3.0, so we use __builtin_bswap. */ #define __arch_swab32(x) __builtin_bswap32(x) #define __arch_swab64(x) __builtin_bswap64(x) - -/* Use the variant that is natural for the wordsize. */ -#ifdef CONFIG_64BIT -#define __arch_swab16(x) (__builtin_bswap64(x) >> 48) -#else #define __arch_swab16(x) (__builtin_bswap32(x) >> 16) -#endif #endif /* _ASM_TILE_SWAB_H */ diff --git a/arch/tile/include/asm/thread_info.h b/arch/tile/include/asm/thread_info.h index 3405b52853b8..bc4f562bd459 100644 --- a/arch/tile/include/asm/thread_info.h +++ b/arch/tile/include/asm/thread_info.h @@ -125,6 +125,7 @@ extern void cpu_idle_on_new_stack(struct thread_info *old_ti, #define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ #define TIF_SECCOMP 6 /* secure computing */ #define TIF_MEMDIE 7 /* OOM killer at work */ +#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */ #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) @@ -134,10 +135,12 @@ extern void cpu_idle_on_new_stack(struct thread_info *old_ti, #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_SECCOMP (1<<TIF_SECCOMP) #define _TIF_MEMDIE (1<<TIF_MEMDIE) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) /* Work to do on any return to user space. */ #define _TIF_ALLWORK_MASK \ - (_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SINGLESTEP|_TIF_ASYNC_TLB) + (_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SINGLESTEP|\ + _TIF_ASYNC_TLB|_TIF_NOTIFY_RESUME) /* * Thread-synchronous status. diff --git a/arch/tile/include/asm/topology.h b/arch/tile/include/asm/topology.h index 343172d422a9..6fdd0c860193 100644 --- a/arch/tile/include/asm/topology.h +++ b/arch/tile/include/asm/topology.h @@ -44,25 +44,64 @@ static inline const struct cpumask *cpumask_of_node(int node) /* For now, use numa node -1 for global allocation. */ #define pcibus_to_node(bus) ((void)(bus), -1) +/* + * TILE architecture has many cores integrated in one processor, so we need + * setup bigger balance_interval for both CPU/NODE scheduling domains to + * reduce process scheduling costs. + */ + +/* sched_domains SD_CPU_INIT for TILE architecture */ +#define SD_CPU_INIT (struct sched_domain) { \ + .min_interval = 4, \ + .max_interval = 128, \ + .busy_factor = 64, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .busy_idx = 2, \ + .idle_idx = 1, \ + .newidle_idx = 0, \ + .wake_idx = 0, \ + .forkexec_idx = 0, \ + \ + .flags = 1*SD_LOAD_BALANCE \ + | 1*SD_BALANCE_NEWIDLE \ + | 1*SD_BALANCE_EXEC \ + | 1*SD_BALANCE_FORK \ + | 0*SD_BALANCE_WAKE \ + | 0*SD_WAKE_AFFINE \ + | 0*SD_PREFER_LOCAL \ + | 0*SD_SHARE_CPUPOWER \ + | 0*SD_SHARE_PKG_RESOURCES \ + | 0*SD_SERIALIZE \ + , \ + .last_balance = jiffies, \ + .balance_interval = 32, \ +} + /* sched_domains SD_NODE_INIT for TILE architecture */ -#define SD_NODE_INIT (struct sched_domain) { \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .busy_idx = 3, \ - .idle_idx = 1, \ - .newidle_idx = 2, \ - .wake_idx = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_NEWIDLE \ - | SD_BALANCE_EXEC \ - | SD_BALANCE_FORK \ - | SD_WAKE_AFFINE \ - | SD_SERIALIZE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ +#define SD_NODE_INIT (struct sched_domain) { \ + .min_interval = 16, \ + .max_interval = 512, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .busy_idx = 3, \ + .idle_idx = 1, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .flags = 1*SD_LOAD_BALANCE \ + | 1*SD_BALANCE_NEWIDLE \ + | 1*SD_BALANCE_EXEC \ + | 1*SD_BALANCE_FORK \ + | 0*SD_BALANCE_WAKE \ + | 0*SD_WAKE_AFFINE \ + | 0*SD_PREFER_LOCAL \ + | 0*SD_SHARE_CPUPOWER \ + | 0*SD_SHARE_PKG_RESOURCES \ + | 1*SD_SERIALIZE \ + , \ + .last_balance = jiffies, \ + .balance_interval = 128, \ } /* By definition, we create nodes based on online memory. */ diff --git a/arch/tile/include/asm/traps.h b/arch/tile/include/asm/traps.h index d06e35f57201..5f20f920f932 100644 --- a/arch/tile/include/asm/traps.h +++ b/arch/tile/include/asm/traps.h @@ -15,10 +15,14 @@ #ifndef _ASM_TILE_TRAPS_H #define _ASM_TILE_TRAPS_H +#include <arch/chip.h> + /* mm/fault.c */ void do_page_fault(struct pt_regs *, int fault_num, unsigned long address, unsigned long write); +#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() void do_async_page_fault(struct pt_regs *); +#endif #ifndef __tilegx__ /* diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h index b35c2db71199..f70bf1c541f1 100644 --- a/arch/tile/include/asm/unistd.h +++ b/arch/tile/include/asm/unistd.h @@ -15,7 +15,7 @@ #if !defined(_ASM_TILE_UNISTD_H) || defined(__SYSCALL) #define _ASM_TILE_UNISTD_H -#ifndef __LP64__ +#if !defined(__LP64__) || defined(__SYSCALL_COMPAT) /* Use the flavor of this syscall that matches the 32-bit API better. */ #define __ARCH_WANT_SYNC_FILE_RANGE2 #endif diff --git a/arch/tile/include/hv/pagesize.h b/arch/tile/include/asm/vga.h index 58bed114fedd..7b46e754d611 100644 --- a/arch/tile/include/hv/pagesize.h +++ b/arch/tile/include/asm/vga.h @@ -10,23 +10,30 @@ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or * NON INFRINGEMENT. See the GNU General Public License for * more details. + * + * Access to VGA videoram. */ -/** - * @file pagesize.h - */ +#ifndef _ASM_TILE_VGA_H +#define _ASM_TILE_VGA_H -#ifndef _HV_PAGESIZE_H -#define _HV_PAGESIZE_H +#include <asm/io.h> -/** The log2 of the size of small pages, in bytes. This value should - * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). - */ -#define HV_LOG2_PAGE_SIZE_SMALL 16 +#define VT_BUF_HAVE_RW -/** The log2 of the size of large pages, in bytes. This value should be - * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). - */ -#define HV_LOG2_PAGE_SIZE_LARGE 24 +static inline void scr_writew(u16 val, volatile u16 *addr) +{ + __raw_writew(val, (volatile u16 __iomem *) addr); +} + +static inline u16 scr_readw(volatile const u16 *addr) +{ + return __raw_readw((volatile const u16 __iomem *) addr); +} + +#define vga_readb(a) readb((u8 __iomem *)(a)) +#define vga_writeb(v,a) writeb(v, (u8 __iomem *)(a)) + +#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap(x, s)) -#endif /* _HV_PAGESIZE_H */ +#endif diff --git a/arch/tile/include/hv/hypervisor.h b/arch/tile/include/hv/hypervisor.h index ee41bca4c8c4..72ec1e972f15 100644 --- a/arch/tile/include/hv/hypervisor.h +++ b/arch/tile/include/hv/hypervisor.h @@ -22,8 +22,6 @@ #include <arch/chip.h> -#include <hv/pagesize.h> - /* Linux builds want unsigned long constants, but assembler wants numbers */ #ifdef __ASSEMBLER__ /** One, for assembler */ @@ -44,11 +42,21 @@ */ #define HV_L1_SPAN (__HV_SIZE_ONE << HV_LOG2_L1_SPAN) +/** The log2 of the size of small pages, in bytes. This value should + * be verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). + */ +#define HV_LOG2_PAGE_SIZE_SMALL 16 + /** The size of small pages, in bytes. This value should be verified * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_SMALL). */ #define HV_PAGE_SIZE_SMALL (__HV_SIZE_ONE << HV_LOG2_PAGE_SIZE_SMALL) +/** The log2 of the size of large pages, in bytes. This value should be + * verified at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). + */ +#define HV_LOG2_PAGE_SIZE_LARGE 24 + /** The size of large pages, in bytes. This value should be verified * at runtime by calling hv_sysconf(HV_SYSCONF_PAGE_SIZE_LARGE). */ diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c index 55a6a74974b4..1dc71eabfc5a 100644 --- a/arch/tile/kernel/backtrace.c +++ b/arch/tile/kernel/backtrace.c @@ -14,19 +14,11 @@ #include <linux/kernel.h> #include <linux/string.h> - #include <asm/backtrace.h> - -#include <arch/chip.h> - #include <asm/opcode-tile.h> +#include <arch/abi.h> - -#define TREG_SP 54 -#define TREG_LR 55 - - -#if TILE_CHIP >= 10 +#ifdef __tilegx__ #define tile_bundle_bits tilegx_bundle_bits #define TILE_MAX_INSTRUCTIONS_PER_BUNDLE TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE #define TILE_BUNDLE_ALIGNMENT_IN_BYTES TILEGX_BUNDLE_ALIGNMENT_IN_BYTES @@ -47,7 +39,7 @@ typedef long long bt_int_reg_t; typedef int bt_int_reg_t; #endif -/** A decoded bundle used for backtracer analysis. */ +/* A decoded bundle used for backtracer analysis. */ struct BacktraceBundle { tile_bundle_bits bits; int num_insns; @@ -56,23 +48,7 @@ struct BacktraceBundle { }; -/* This implementation only makes sense for native tools. */ -/** Default function to read memory. */ -static bool bt_read_memory(void *result, VirtualAddress addr, - unsigned int size, void *extra) -{ - /* FIXME: this should do some horrible signal stuff to catch - * SEGV cleanly and fail. - * - * Or else the caller should do the setjmp for efficiency. - */ - - memcpy(result, (const void *)addr, size); - return true; -} - - -/** Locates an instruction inside the given bundle that +/* Locates an instruction inside the given bundle that * has the specified mnemonic, and whose first 'num_operands_to_match' * operands exactly match those in 'operand_values'. */ @@ -107,13 +83,13 @@ static const struct tile_decoded_instruction *find_matching_insn( return NULL; } -/** Does this bundle contain an 'iret' instruction? */ +/* Does this bundle contain an 'iret' instruction? */ static inline bool bt_has_iret(const struct BacktraceBundle *bundle) { return find_matching_insn(bundle, TILE_OPC_IRET, NULL, 0) != NULL; } -/** Does this bundle contain an 'addi sp, sp, OFFSET' or +/* Does this bundle contain an 'addi sp, sp, OFFSET' or * 'addli sp, sp, OFFSET' instruction, and if so, what is OFFSET? */ static bool bt_has_addi_sp(const struct BacktraceBundle *bundle, int *adjust) @@ -124,7 +100,7 @@ static bool bt_has_addi_sp(const struct BacktraceBundle *bundle, int *adjust) find_matching_insn(bundle, TILE_OPC_ADDI, vals, 2); if (insn == NULL) insn = find_matching_insn(bundle, TILE_OPC_ADDLI, vals, 2); -#if TILE_CHIP >= 10 +#ifdef __tilegx__ if (insn == NULL) insn = find_matching_insn(bundle, TILEGX_OPC_ADDXLI, vals, 2); if (insn == NULL) @@ -137,7 +113,7 @@ static bool bt_has_addi_sp(const struct BacktraceBundle *bundle, int *adjust) return true; } -/** Does this bundle contain any 'info OP' or 'infol OP' +/* Does this bundle contain any 'info OP' or 'infol OP' * instruction, and if so, what are their OP? Note that OP is interpreted * as an unsigned value by this code since that's what the caller wants. * Returns the number of info ops found. @@ -161,7 +137,7 @@ static int bt_get_info_ops(const struct BacktraceBundle *bundle, return num_ops; } -/** Does this bundle contain a jrp instruction, and if so, to which +/* Does this bundle contain a jrp instruction, and if so, to which * register is it jumping? */ static bool bt_has_jrp(const struct BacktraceBundle *bundle, int *target_reg) @@ -175,7 +151,7 @@ static bool bt_has_jrp(const struct BacktraceBundle *bundle, int *target_reg) return true; } -/** Does this bundle modify the specified register in any way? */ +/* Does this bundle modify the specified register in any way? */ static bool bt_modifies_reg(const struct BacktraceBundle *bundle, int reg) { int i, j; @@ -195,34 +171,34 @@ static bool bt_modifies_reg(const struct BacktraceBundle *bundle, int reg) return false; } -/** Does this bundle modify sp? */ +/* Does this bundle modify sp? */ static inline bool bt_modifies_sp(const struct BacktraceBundle *bundle) { return bt_modifies_reg(bundle, TREG_SP); } -/** Does this bundle modify lr? */ +/* Does this bundle modify lr? */ static inline bool bt_modifies_lr(const struct BacktraceBundle *bundle) { return bt_modifies_reg(bundle, TREG_LR); } -/** Does this bundle contain the instruction 'move fp, sp'? */ +/* Does this bundle contain the instruction 'move fp, sp'? */ static inline bool bt_has_move_r52_sp(const struct BacktraceBundle *bundle) { static const int vals[2] = { 52, TREG_SP }; return find_matching_insn(bundle, TILE_OPC_MOVE, vals, 2) != NULL; } -/** Does this bundle contain a store of lr to sp? */ +/* Does this bundle contain a store of lr to sp? */ static inline bool bt_has_sw_sp_lr(const struct BacktraceBundle *bundle) { static const int vals[2] = { TREG_SP, TREG_LR }; return find_matching_insn(bundle, OPCODE_STORE, vals, 2) != NULL; } -#if TILE_CHIP >= 10 -/** Track moveli values placed into registers. */ +#ifdef __tilegx__ +/* Track moveli values placed into registers. */ static inline void bt_update_moveli(const struct BacktraceBundle *bundle, int moveli_args[]) { @@ -238,7 +214,7 @@ static inline void bt_update_moveli(const struct BacktraceBundle *bundle, } } -/** Does this bundle contain an 'add sp, sp, reg' instruction +/* Does this bundle contain an 'add sp, sp, reg' instruction * from a register that we saw a moveli into, and if so, what * is the value in the register? */ @@ -260,11 +236,11 @@ static bool bt_has_add_sp(const struct BacktraceBundle *bundle, int *adjust, } #endif -/** Locates the caller's PC and SP for a program starting at the +/* Locates the caller's PC and SP for a program starting at the * given address. */ static void find_caller_pc_and_caller_sp(CallerLocation *location, - const VirtualAddress start_pc, + const unsigned long start_pc, BacktraceMemoryReader read_memory_func, void *read_memory_func_extra) { @@ -288,9 +264,9 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, tile_bundle_bits prefetched_bundles[32]; int num_bundles_prefetched = 0; int next_bundle = 0; - VirtualAddress pc; + unsigned long pc; -#if TILE_CHIP >= 10 +#ifdef __tilegx__ /* Naively try to track moveli values to support addx for -m32. */ int moveli_args[TILEGX_NUM_REGISTERS] = { 0 }; #endif @@ -369,10 +345,6 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, /* Weird; reserved value, ignore it. */ continue; } - if (info_operand & ENTRY_POINT_INFO_OP) { - /* This info op is ignored by the backtracer. */ - continue; - } /* Skip info ops which are not in the * "one_ago" mode we want right now. @@ -453,7 +425,7 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, if (!sp_determined) { int adjust; if (bt_has_addi_sp(&bundle, &adjust) -#if TILE_CHIP >= 10 +#ifdef __tilegx__ || bt_has_add_sp(&bundle, &adjust, moveli_args) #endif ) { @@ -504,7 +476,7 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, } } -#if TILE_CHIP >= 10 +#ifdef __tilegx__ /* Track moveli arguments for -m32 mode. */ bt_update_moveli(&bundle, moveli_args); #endif @@ -546,18 +518,26 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, } } +/* Initializes a backtracer to start from the given location. + * + * If the frame pointer cannot be determined it is set to -1. + * + * state: The state to be filled in. + * read_memory_func: A callback that reads memory. + * read_memory_func_extra: An arbitrary argument to read_memory_func. + * pc: The current PC. + * lr: The current value of the 'lr' register. + * sp: The current value of the 'sp' register. + * r52: The current value of the 'r52' register. + */ void backtrace_init(BacktraceIterator *state, BacktraceMemoryReader read_memory_func, void *read_memory_func_extra, - VirtualAddress pc, VirtualAddress lr, - VirtualAddress sp, VirtualAddress r52) + unsigned long pc, unsigned long lr, + unsigned long sp, unsigned long r52) { CallerLocation location; - VirtualAddress fp, initial_frame_caller_pc; - - if (read_memory_func == NULL) { - read_memory_func = bt_read_memory; - } + unsigned long fp, initial_frame_caller_pc; /* Find out where we are in the initial frame. */ find_caller_pc_and_caller_sp(&location, pc, @@ -630,12 +610,15 @@ void backtrace_init(BacktraceIterator *state, /* Handle the case where the register holds more bits than the VA. */ static bool valid_addr_reg(bt_int_reg_t reg) { - return ((VirtualAddress)reg == reg); + return ((unsigned long)reg == reg); } +/* Advances the backtracing state to the calling frame, returning + * true iff successful. + */ bool backtrace_next(BacktraceIterator *state) { - VirtualAddress next_fp, next_pc; + unsigned long next_fp, next_pc; bt_int_reg_t next_frame[2]; if (state->fp == -1) { diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c index dbc213adf5e1..bf5e9d70266c 100644 --- a/arch/tile/kernel/compat.c +++ b/arch/tile/kernel/compat.c @@ -135,26 +135,15 @@ long tile_compat_sys_msgrcv(int msqid, /* Provide the compat syscall number to call mapping. */ #undef __SYSCALL -#define __SYSCALL(nr, call) [nr] = (compat_##call), +#define __SYSCALL(nr, call) [nr] = (call), /* The generic versions of these don't work for Tile. */ #define compat_sys_msgrcv tile_compat_sys_msgrcv #define compat_sys_msgsnd tile_compat_sys_msgsnd /* See comments in sys.c */ -#define compat_sys_fadvise64 sys32_fadvise64 #define compat_sys_fadvise64_64 sys32_fadvise64_64 #define compat_sys_readahead sys32_readahead -#define compat_sys_sync_file_range compat_sys_sync_file_range2 - -/* We leverage the "struct stat64" type for 32-bit time_t/nsec. */ -#define compat_sys_stat64 sys_stat64 -#define compat_sys_lstat64 sys_lstat64 -#define compat_sys_fstat64 sys_fstat64 -#define compat_sys_fstatat64 sys_fstatat64 - -/* The native sys_ptrace dynamically handles compat binaries. */ -#define compat_sys_ptrace sys_ptrace /* Call the trampolines to manage pt_regs where necessary. */ #define compat_sys_execve _compat_sys_execve diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c index dbb0dfc7bece..a7869ad62776 100644 --- a/arch/tile/kernel/compat_signal.c +++ b/arch/tile/kernel/compat_signal.c @@ -317,7 +317,7 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs) return 0; badframe: - force_sig(SIGSEGV, current); + signal_fault("bad sigreturn frame", regs, frame, 0); return 0; } @@ -431,6 +431,6 @@ int compat_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, return 0; give_sigsegv: - force_sigsegv(sig, current); + signal_fault("bad setup frame", regs, frame, sig); return -EFAULT; } diff --git a/arch/tile/kernel/futex_64.S b/arch/tile/kernel/futex_64.S new file mode 100644 index 000000000000..f465d1eda20f --- /dev/null +++ b/arch/tile/kernel/futex_64.S @@ -0,0 +1,55 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Atomically access user memory, but use MMU to avoid propagating + * kernel exceptions. + */ + +#include <linux/linkage.h> +#include <asm/errno.h> +#include <asm/futex.h> +#include <asm/page.h> +#include <asm/processor.h> + +/* + * Provide a set of atomic memory operations supporting <asm/futex.h>. + * + * r0: user address to manipulate + * r1: new value to write, or for cmpxchg, old value to compare against + * r2: (cmpxchg only) new value to write + * + * Return __get_user struct, r0 with value, r1 with error. + */ +#define FUTEX_OP(name, ...) \ +STD_ENTRY(futex_##name) \ + __VA_ARGS__; \ + { \ + move r1, zero; \ + jrp lr \ + }; \ + STD_ENDPROC(futex_##name); \ + .pushsection __ex_table,"a"; \ + .quad 1b, get_user_fault; \ + .popsection + + .pushsection .fixup,"ax" +get_user_fault: + { movei r1, -EFAULT; jrp lr } + ENDPROC(get_user_fault) + .popsection + +FUTEX_OP(cmpxchg, mtspr CMPEXCH_VALUE, r1; 1: cmpexch4 r0, r0, r2) +FUTEX_OP(set, 1: exch4 r0, r0, r1) +FUTEX_OP(add, 1: fetchadd4 r0, r0, r1) +FUTEX_OP(or, 1: fetchor4 r0, r0, r1) +FUTEX_OP(andn, nor r1, r1, zero; 1: fetchand4 r0, r0, r1) diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c index e910530436e6..3bddef710de4 100644 --- a/arch/tile/kernel/hardwall.c +++ b/arch/tile/kernel/hardwall.c @@ -268,12 +268,10 @@ void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num) found_processes = 0; list_for_each_entry(p, &rect->task_head, thread.hardwall_list) { BUG_ON(p->thread.hardwall != rect); - if (p->sighand) { + if (!(p->flags & PF_EXITING)) { found_processes = 1; pr_notice("hardwall: killing %d\n", p->pid); - spin_lock(&p->sighand->siglock); - __group_send_sig_info(info.si_signo, &info, p); - spin_unlock(&p->sighand->siglock); + do_send_sig_info(info.si_signo, &info, p, false); } } if (!found_processes) diff --git a/arch/tile/kernel/head_64.S b/arch/tile/kernel/head_64.S new file mode 100644 index 000000000000..6bc3a932fe45 --- /dev/null +++ b/arch/tile/kernel/head_64.S @@ -0,0 +1,269 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * TILE startup code. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/thread_info.h> +#include <asm/processor.h> +#include <asm/asm-offsets.h> +#include <hv/hypervisor.h> +#include <arch/chip.h> +#include <arch/spr_def.h> + +/* + * This module contains the entry code for kernel images. It performs the + * minimal setup needed to call the generic C routines. + */ + + __HEAD +ENTRY(_start) + /* Notify the hypervisor of what version of the API we want */ + { + movei r1, TILE_CHIP + movei r2, TILE_CHIP_REV + } + { + moveli r0, _HV_VERSION + jal hv_init + } + /* Get a reasonable default ASID in r0 */ + { + move r0, zero + jal hv_inquire_asid + } + + /* + * Install the default page table. The relocation required to + * statically define the table is a bit too complex, so we have + * to plug in the pointer from the L0 to the L1 table by hand. + * We only do this on the first cpu to boot, though, since the + * other CPUs should see a properly-constructed page table. + */ + { + v4int_l r2, zero, r0 /* ASID for hv_install_context */ + moveli r4, hw1_last(swapper_pgprot - PAGE_OFFSET) + } + { + shl16insli r4, r4, hw0(swapper_pgprot - PAGE_OFFSET) + } + { + ld r1, r4 /* access_pte for hv_install_context */ + } + { + moveli r0, hw1_last(.Lsv_data_pmd - PAGE_OFFSET) + moveli r6, hw1_last(temp_data_pmd - PAGE_OFFSET) + } + { + /* After initializing swapper_pgprot, HV_PTE_GLOBAL is set. */ + bfextu r7, r1, HV_PTE_INDEX_GLOBAL, HV_PTE_INDEX_GLOBAL + inv r4 + } + bnez r7, .Lno_write + { + shl16insli r0, r0, hw0(.Lsv_data_pmd - PAGE_OFFSET) + shl16insli r6, r6, hw0(temp_data_pmd - PAGE_OFFSET) + } + { + /* Cut off the low bits of the PT address. */ + shrui r6, r6, HV_LOG2_PAGE_TABLE_ALIGN + /* Start with our access pte. */ + move r5, r1 + } + { + /* Stuff the address into the page table pointer slot of the PTE. */ + bfins r5, r6, HV_PTE_INDEX_PTFN, \ + HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 + } + { + /* Store the L0 data PTE. */ + st r0, r5 + addli r6, r6, (temp_code_pmd - temp_data_pmd) >> \ + HV_LOG2_PAGE_TABLE_ALIGN + } + { + addli r0, r0, .Lsv_code_pmd - .Lsv_data_pmd + bfins r5, r6, HV_PTE_INDEX_PTFN, \ + HV_PTE_INDEX_PTFN + HV_PTE_PTFN_BITS - 1 + } + /* Store the L0 code PTE. */ + st r0, r5 + +.Lno_write: + moveli lr, hw2_last(1f) + { + shl16insli lr, lr, hw1(1f) + moveli r0, hw1_last(swapper_pg_dir - PAGE_OFFSET) + } + { + shl16insli lr, lr, hw0(1f) + shl16insli r0, r0, hw0(swapper_pg_dir - PAGE_OFFSET) + } + { + move r3, zero + j hv_install_context + } +1: + + /* Install the interrupt base. */ + moveli r0, hw2_last(MEM_SV_START) + shl16insli r0, r0, hw1(MEM_SV_START) + shl16insli r0, r0, hw0(MEM_SV_START) + mtspr SPR_INTERRUPT_VECTOR_BASE_K, r0 + + /* + * Get our processor number and save it away in SAVE_K_0. + * Extract stuff from the topology structure: r4 = y, r6 = x, + * r5 = width. FIXME: consider whether we want to just make these + * 64-bit values (and if so fix smp_topology write below, too). + */ + jal hv_inquire_topology + { + v4int_l r5, zero, r1 /* r5 = width */ + shrui r4, r0, 32 /* r4 = y */ + } + { + v4int_l r6, zero, r0 /* r6 = x */ + mul_lu_lu r4, r4, r5 + } + { + add r4, r4, r6 /* r4 == cpu == y*width + x */ + } + +#ifdef CONFIG_SMP + /* + * Load up our per-cpu offset. When the first (master) tile + * boots, this value is still zero, so we will load boot_pc + * with start_kernel, and boot_sp with init_stack + THREAD_SIZE. + * The master tile initializes the per-cpu offset array, so that + * when subsequent (secondary) tiles boot, they will instead load + * from their per-cpu versions of boot_sp and boot_pc. + */ + moveli r5, hw2_last(__per_cpu_offset) + shl16insli r5, r5, hw1(__per_cpu_offset) + shl16insli r5, r5, hw0(__per_cpu_offset) + shl3add r5, r4, r5 + ld r5, r5 + bnez r5, 1f + + /* + * Save the width and height to the smp_topology variable + * for later use. + */ + moveli r0, hw2_last(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) + shl16insli r0, r0, hw1(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) + shl16insli r0, r0, hw0(smp_topology + HV_TOPOLOGY_WIDTH_OFFSET) + st r0, r1 +1: +#else + move r5, zero +#endif + + /* Load and go with the correct pc and sp. */ + { + moveli r1, hw2_last(boot_sp) + moveli r0, hw2_last(boot_pc) + } + { + shl16insli r1, r1, hw1(boot_sp) + shl16insli r0, r0, hw1(boot_pc) + } + { + shl16insli r1, r1, hw0(boot_sp) + shl16insli r0, r0, hw0(boot_pc) + } + { + add r1, r1, r5 + add r0, r0, r5 + } + ld r0, r0 + ld sp, r1 + or r4, sp, r4 + mtspr SPR_SYSTEM_SAVE_K_0, r4 /* save ksp0 + cpu */ + addi sp, sp, -STACK_TOP_DELTA + { + move lr, zero /* stop backtraces in the called function */ + jr r0 + } + ENDPROC(_start) + +__PAGE_ALIGNED_BSS + .align PAGE_SIZE +ENTRY(empty_zero_page) + .fill PAGE_SIZE,1,0 + END(empty_zero_page) + + .macro PTE cpa, bits1 + .quad HV_PTE_PAGE | HV_PTE_DIRTY | HV_PTE_PRESENT | HV_PTE_ACCESSED |\ + HV_PTE_GLOBAL | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) |\ + (\bits1) | (HV_CPA_TO_PFN(\cpa) << HV_PTE_INDEX_PFN) + .endm + +__PAGE_ALIGNED_DATA + .align PAGE_SIZE +ENTRY(swapper_pg_dir) + .org swapper_pg_dir + HV_L0_INDEX(PAGE_OFFSET) * HV_PTE_SIZE +.Lsv_data_pmd: + .quad 0 /* PTE temp_data_pmd - PAGE_OFFSET, 0 */ + .org swapper_pg_dir + HV_L0_INDEX(MEM_SV_START) * HV_PTE_SIZE +.Lsv_code_pmd: + .quad 0 /* PTE temp_code_pmd - PAGE_OFFSET, 0 */ + .org swapper_pg_dir + HV_L0_SIZE + END(swapper_pg_dir) + + .align HV_PAGE_TABLE_ALIGN +ENTRY(temp_data_pmd) + /* + * We fill the PAGE_OFFSET pmd with huge pages with + * VA = PA + PAGE_OFFSET. We remap things with more precise access + * permissions later. + */ + .set addr, 0 + .rept HV_L1_ENTRIES + PTE addr, HV_PTE_READABLE | HV_PTE_WRITABLE + .set addr, addr + HV_PAGE_SIZE_LARGE + .endr + .org temp_data_pmd + HV_L1_SIZE + END(temp_data_pmd) + + .align HV_PAGE_TABLE_ALIGN +ENTRY(temp_code_pmd) + /* + * We fill the MEM_SV_START pmd with huge pages with + * VA = PA + PAGE_OFFSET. We remap things with more precise access + * permissions later. + */ + .set addr, 0 + .rept HV_L1_ENTRIES + PTE addr, HV_PTE_READABLE | HV_PTE_EXECUTABLE + .set addr, addr + HV_PAGE_SIZE_LARGE + .endr + .org temp_code_pmd + HV_L1_SIZE + END(temp_code_pmd) + + /* + * Isolate swapper_pgprot to its own cache line, since each cpu + * starting up will read it using VA-is-PA and local homing. + * This would otherwise likely conflict with other data on the cache + * line, once we have set its permanent home in the page tables. + */ + __INITDATA + .align CHIP_L2_LINE_SIZE() +ENTRY(swapper_pgprot) + .quad HV_PTE_PRESENT | (HV_PTE_MODE_CACHE_NO_L3 << HV_PTE_INDEX_MODE) + .align CHIP_L2_LINE_SIZE() + END(swapper_pgprot) diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index fffcfa6b3a62..72ade79b621b 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -851,14 +851,27 @@ STD_ENTRY(interrupt_return) /* Check to see if there is any work to do before returning to user. */ { addi r29, r32, THREAD_INFO_FLAGS_OFFSET - moveli r28, lo16(_TIF_ALLWORK_MASK) + moveli r1, lo16(_TIF_ALLWORK_MASK) } { lw r29, r29 - auli r28, r28, ha16(_TIF_ALLWORK_MASK) + auli r1, r1, ha16(_TIF_ALLWORK_MASK) } - and r28, r29, r28 - bnz r28, .Lwork_pending + and r1, r29, r1 + bzt r1, .Lrestore_all + + /* + * Make sure we have all the registers saved for signal + * handling or single-step. Call out to C code to figure out + * exactly what we need to do for each flag bit, then if + * necessary, reload the flags and recheck. + */ + push_extra_callee_saves r0 + { + PTREGS_PTR(r0, PTREGS_OFFSET_BASE) + jal do_work_pending + } + bnz r0, .Lresume_userspace /* * In the NMI case we @@ -1099,99 +1112,6 @@ STD_ENTRY(interrupt_return) pop_reg r50 pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51) j .Lcontinue_restore_regs - -.Lwork_pending: - /* Mask the reschedule flag */ - andi r28, r29, _TIF_NEED_RESCHED - - { - /* - * If the NEED_RESCHED flag is called, we call schedule(), which - * may drop this context right here and go do something else. - * On return, jump back to .Lresume_userspace and recheck. - */ - bz r28, .Lasync_tlb - - /* Mask the async-tlb flag */ - andi r28, r29, _TIF_ASYNC_TLB - } - - jal schedule - FEEDBACK_REENTER(interrupt_return) - - /* Reload the flags and check again */ - j .Lresume_userspace - -.Lasync_tlb: - { - bz r28, .Lneed_sigpending - - /* Mask the sigpending flag */ - andi r28, r29, _TIF_SIGPENDING - } - - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal do_async_page_fault - FEEDBACK_REENTER(interrupt_return) - - /* - * Go restart the "resume userspace" process. We may have - * fired a signal, and we need to disable interrupts again. - */ - j .Lresume_userspace - -.Lneed_sigpending: - /* - * At this point we are either doing signal handling or single-step, - * so either way make sure we have all the registers saved. - */ - push_extra_callee_saves r0 - - { - /* If no signal pending, skip to singlestep check */ - bz r28, .Lneed_singlestep - - /* Mask the singlestep flag */ - andi r28, r29, _TIF_SINGLESTEP - } - - jal do_signal - FEEDBACK_REENTER(interrupt_return) - - /* Reload the flags and check again */ - j .Lresume_userspace - -.Lneed_singlestep: - { - /* Get a pointer to the EX1 field */ - PTREGS_PTR(r29, PTREGS_OFFSET_EX1) - - /* If we get here, our bit must be set. */ - bz r28, .Lwork_confusion - } - /* If we are in priv mode, don't single step */ - lw r28, r29 - andi r28, r28, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ - bnz r28, .Lrestore_all - - /* Allow interrupts within the single step code */ - TRACE_IRQS_ON /* Note: clobbers registers r0-r29 */ - IRQ_ENABLE(r20, r21) - - /* try to single-step the current instruction */ - PTREGS_PTR(r0, PTREGS_OFFSET_BASE) - jal single_step_once - FEEDBACK_REENTER(interrupt_return) - - /* Re-disable interrupts. TRACE_IRQS_OFF in .Lrestore_all. */ - IRQ_DISABLE(r20,r21) - - j .Lrestore_all - -.Lwork_confusion: - move r0, r28 - panic "thread_info allwork flags unhandled on userspace resume: %#x" - STD_ENDPROC(interrupt_return) /* @@ -1550,7 +1470,10 @@ STD_ENTRY(_sys_clone) * We place it in the __HEAD section to ensure it is relatively * near to the intvec_SWINT_1 code (reachable by a conditional branch). * - * Must match register usage in do_page_fault(). + * Our use of ATOMIC_LOCK_REG here must match do_page_fault_ics(). + * + * As we do in lib/atomic_asm_32.S, we bypass a store if the value we + * would store is the same as the value we just loaded. */ __HEAD .align 64 @@ -1611,17 +1534,7 @@ ENTRY(sys_cmpxchg) { shri r20, r25, 32 - ATOMIC_HASH_L1_SHIFT slt_u r23, r0, r23 - - /* - * Ensure that the TLB is loaded before we take out the lock. - * On TILEPro, this will start fetching the value all the way - * into our L1 as well (and if it gets modified before we - * grab the lock, it will be invalidated from our cache - * before we reload it). On tile64, we'll start fetching it - * into our L1 if we're the home, and if we're not, we'll - * still at least start fetching it into the home's L2. - */ - lw r26, r0 + lw r26, r0 /* see comment in the "#else" for the "lw r26". */ } { s2a r21, r20, r21 @@ -1637,18 +1550,9 @@ ENTRY(sys_cmpxchg) bbs r23, .Lcmpxchg64 andi r23, r0, 7 /* Precompute alignment for cmpxchg64. */ } - { - /* - * We very carefully align the code that actually runs with - * the lock held (nine bundles) so that we know it is all in - * the icache when we start. This instruction (the jump) is - * at the start of the first cache line, address zero mod 64; - * we jump to somewhere in the second cache line to issue the - * tns, then jump back to finish up. - */ s2a ATOMIC_LOCK_REG_NAME, r25, r21 - j .Lcmpxchg32_tns + j .Lcmpxchg32_tns /* see comment in the #else for the jump. */ } #else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ @@ -1713,24 +1617,25 @@ ENTRY(sys_cmpxchg) { /* * We very carefully align the code that actually runs with - * the lock held (nine bundles) so that we know it is all in + * the lock held (twelve bundles) so that we know it is all in * the icache when we start. This instruction (the jump) is * at the start of the first cache line, address zero mod 64; - * we jump to somewhere in the second cache line to issue the - * tns, then jump back to finish up. + * we jump to the very end of the second cache line to get that + * line loaded in the icache, then fall through to issue the tns + * in the third cache line, at which point it's all cached. + * Note that is for performance, not correctness. */ j .Lcmpxchg32_tns } #endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ - ENTRY(__sys_cmpxchg_grab_lock) +/* Symbol for do_page_fault_ics() to use to compare against the PC. */ +.global __sys_cmpxchg_grab_lock +__sys_cmpxchg_grab_lock: /* * Perform the actual cmpxchg or atomic_update. - * Note that the system <arch/atomic.h> header relies on - * atomic_update() to always perform an "mf", so don't make - * it optional or conditional without modifying that code. */ .Ldo_cmpxchg32: { @@ -1748,10 +1653,13 @@ ENTRY(sys_cmpxchg) } { mvnz r24, r23, r25 /* Use atomic_update value if appropriate. */ - bbns r22, .Lcmpxchg32_mismatch + bbns r22, .Lcmpxchg32_nostore } + seq r22, r24, r21 /* Are we storing the value we loaded? */ + bbs r22, .Lcmpxchg32_nostore sw r0, r24 + /* The following instruction is the start of the second cache line. */ /* Do slow mtspr here so the following "mf" waits less. */ { move sp, r27 @@ -1759,7 +1667,6 @@ ENTRY(sys_cmpxchg) } mf - /* The following instruction is the start of the second cache line. */ { move r0, r21 sw ATOMIC_LOCK_REG_NAME, zero @@ -1767,7 +1674,7 @@ ENTRY(sys_cmpxchg) iret /* Duplicated code here in the case where we don't overlap "mf" */ -.Lcmpxchg32_mismatch: +.Lcmpxchg32_nostore: { move r0, r21 sw ATOMIC_LOCK_REG_NAME, zero @@ -1783,8 +1690,6 @@ ENTRY(sys_cmpxchg) * and for 64-bit cmpxchg. We provide it as a macro and put * it into both versions. We can't share the code literally * since it depends on having the right branch-back address. - * Note that the first few instructions should share the cache - * line with the second half of the actual locked code. */ .macro cmpxchg_lock, bitwidth @@ -1810,7 +1715,7 @@ ENTRY(sys_cmpxchg) } /* * The preceding instruction is the last thing that must be - * on the second cache line. + * hot in the icache before we do the "tns" above. */ #ifdef CONFIG_SMP @@ -1841,6 +1746,12 @@ ENTRY(sys_cmpxchg) .endm .Lcmpxchg32_tns: + /* + * This is the last instruction on the second cache line. + * The nop here loads the second line, then we fall through + * to the tns to load the third line before we take the lock. + */ + nop cmpxchg_lock 32 /* diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S new file mode 100644 index 000000000000..79c93e10ba27 --- /dev/null +++ b/arch/tile/kernel/intvec_64.S @@ -0,0 +1,1231 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Linux interrupt vectors. + */ + +#include <linux/linkage.h> +#include <linux/errno.h> +#include <linux/unistd.h> +#include <asm/ptrace.h> +#include <asm/thread_info.h> +#include <asm/irqflags.h> +#include <asm/asm-offsets.h> +#include <asm/types.h> +#include <hv/hypervisor.h> +#include <arch/abi.h> +#include <arch/interrupts.h> +#include <arch/spr_def.h> + +#ifdef CONFIG_PREEMPT +# error "No support for kernel preemption currently" +#endif + +#define PTREGS_PTR(reg, ptreg) addli reg, sp, C_ABI_SAVE_AREA_SIZE + (ptreg) + +#define PTREGS_OFFSET_SYSCALL PTREGS_OFFSET_REG(TREG_SYSCALL_NR) + + + .macro push_reg reg, ptr=sp, delta=-8 + { + st \ptr, \reg + addli \ptr, \ptr, \delta + } + .endm + + .macro pop_reg reg, ptr=sp, delta=8 + { + ld \reg, \ptr + addli \ptr, \ptr, \delta + } + .endm + + .macro pop_reg_zero reg, zreg, ptr=sp, delta=8 + { + move \zreg, zero + ld \reg, \ptr + addi \ptr, \ptr, \delta + } + .endm + + .macro push_extra_callee_saves reg + PTREGS_PTR(\reg, PTREGS_OFFSET_REG(51)) + push_reg r51, \reg + push_reg r50, \reg + push_reg r49, \reg + push_reg r48, \reg + push_reg r47, \reg + push_reg r46, \reg + push_reg r45, \reg + push_reg r44, \reg + push_reg r43, \reg + push_reg r42, \reg + push_reg r41, \reg + push_reg r40, \reg + push_reg r39, \reg + push_reg r38, \reg + push_reg r37, \reg + push_reg r36, \reg + push_reg r35, \reg + push_reg r34, \reg, PTREGS_OFFSET_BASE - PTREGS_OFFSET_REG(34) + .endm + + .macro panic str + .pushsection .rodata, "a" +1: + .asciz "\str" + .popsection + { + moveli r0, hw2_last(1b) + } + { + shl16insli r0, r0, hw1(1b) + } + { + shl16insli r0, r0, hw0(1b) + jal panic + } + .endm + + +#ifdef __COLLECT_LINKER_FEEDBACK__ + .pushsection .text.intvec_feedback,"ax" +intvec_feedback: + .popsection +#endif + + /* + * Default interrupt handler. + * + * vecnum is where we'll put this code. + * c_routine is the C routine we'll call. + * + * The C routine is passed two arguments: + * - A pointer to the pt_regs state. + * - The interrupt vector number. + * + * The "processing" argument specifies the code for processing + * the interrupt. Defaults to "handle_interrupt". + */ + .macro int_hand vecnum, vecname, c_routine, processing=handle_interrupt + .org (\vecnum << 8) +intvec_\vecname: + /* Temporarily save a register so we have somewhere to work. */ + + mtspr SPR_SYSTEM_SAVE_K_1, r0 + mfspr r0, SPR_EX_CONTEXT_K_1 + + andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + + .ifc \vecnum, INT_DOUBLE_FAULT + /* + * For double-faults from user-space, fall through to the normal + * register save and stack setup path. Otherwise, it's the + * hypervisor giving us one last chance to dump diagnostics, and we + * branch to the kernel_double_fault routine to do so. + */ + beqz r0, 1f + j _kernel_double_fault +1: + .else + /* + * If we're coming from user-space, then set sp to the top of + * the kernel stack. Otherwise, assume sp is already valid. + */ + { + bnez r0, 0f + move r0, sp + } + .endif + + .ifc \c_routine, do_page_fault + /* + * The page_fault handler may be downcalled directly by the + * hypervisor even when Linux is running and has ICS set. + * + * In this case the contents of EX_CONTEXT_K_1 reflect the + * previous fault and can't be relied on to choose whether or + * not to reinitialize the stack pointer. So we add a test + * to see whether SYSTEM_SAVE_K_2 has the high bit set, + * and if so we don't reinitialize sp, since we must be coming + * from Linux. (In fact the precise case is !(val & ~1), + * but any Linux PC has to have the high bit set.) + * + * Note that the hypervisor *always* sets SYSTEM_SAVE_K_2 for + * any path that turns into a downcall to one of our TLB handlers. + * + * FIXME: if we end up never using this path, perhaps we should + * prevent the hypervisor from generating downcalls in this case. + * The advantage of getting a downcall is we can panic in Linux. + */ + mfspr r0, SPR_SYSTEM_SAVE_K_2 + { + bltz r0, 0f /* high bit in S_S_1_2 is for a PC to use */ + move r0, sp + } + .endif + + + /* + * SYSTEM_SAVE_K_0 holds the cpu number in the low bits, and + * the current stack top in the higher bits. So we recover + * our stack top by just masking off the low bits, then + * point sp at the top aligned address on the actual stack page. + */ + mfspr r0, SPR_SYSTEM_SAVE_K_0 + mm r0, zero, LOG2_THREAD_SIZE, 63 + +0: + /* + * Align the stack mod 64 so we can properly predict what + * cache lines we need to write-hint to reduce memory fetch + * latency as we enter the kernel. The layout of memory is + * as follows, with cache line 0 at the lowest VA, and cache + * line 8 just below the r0 value this "andi" computes. + * Note that we never write to cache line 8, and we skip + * cache lines 1-3 for syscalls. + * + * cache line 8: ptregs padding (two words) + * cache line 7: sp, lr, pc, ex1, faultnum, orig_r0, flags, cmpexch + * cache line 6: r46...r53 (tp) + * cache line 5: r38...r45 + * cache line 4: r30...r37 + * cache line 3: r22...r29 + * cache line 2: r14...r21 + * cache line 1: r6...r13 + * cache line 0: 2 x frame, r0..r5 + */ + andi r0, r0, -64 + + /* + * Push the first four registers on the stack, so that we can set + * them to vector-unique values before we jump to the common code. + * + * Registers are pushed on the stack as a struct pt_regs, + * with the sp initially just above the struct, and when we're + * done, sp points to the base of the struct, minus + * C_ABI_SAVE_AREA_SIZE, so we can directly jal to C code. + * + * This routine saves just the first four registers, plus the + * stack context so we can do proper backtracing right away, + * and defers to handle_interrupt to save the rest. + * The backtracer needs pc, ex1, lr, sp, r52, and faultnum. + */ + addli r0, r0, PTREGS_OFFSET_LR - (PTREGS_SIZE + KSTK_PTREGS_GAP) + wh64 r0 /* cache line 7 */ + { + st r0, lr + addli r0, r0, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR + } + { + st r0, sp + addli sp, r0, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_SP + } + wh64 sp /* cache line 6 */ + { + st sp, r52 + addli sp, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(52) + } + wh64 sp /* cache line 0 */ + { + st sp, r1 + addli sp, sp, PTREGS_OFFSET_REG(2) - PTREGS_OFFSET_REG(1) + } + { + st sp, r2 + addli sp, sp, PTREGS_OFFSET_REG(3) - PTREGS_OFFSET_REG(2) + } + { + st sp, r3 + addli sp, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_REG(3) + } + mfspr r0, SPR_EX_CONTEXT_K_0 + .ifc \processing,handle_syscall + /* + * Bump the saved PC by one bundle so that when we return, we won't + * execute the same swint instruction again. We need to do this while + * we're in the critical section. + */ + addi r0, r0, 8 + .endif + { + st sp, r0 + addli sp, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC + } + mfspr r0, SPR_EX_CONTEXT_K_1 + { + st sp, r0 + addi sp, sp, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 + /* + * Use r0 for syscalls so it's a temporary; use r1 for interrupts + * so that it gets passed through unchanged to the handler routine. + * Note that the .if conditional confusingly spans bundles. + */ + .ifc \processing,handle_syscall + movei r0, \vecnum + } + { + st sp, r0 + .else + movei r1, \vecnum + } + { + st sp, r1 + .endif + addli sp, sp, PTREGS_OFFSET_REG(0) - PTREGS_OFFSET_FAULTNUM + } + mfspr r0, SPR_SYSTEM_SAVE_K_1 /* Original r0 */ + { + st sp, r0 + addi sp, sp, -PTREGS_OFFSET_REG(0) - 8 + } + { + st sp, zero /* write zero into "Next SP" frame pointer */ + addi sp, sp, -8 /* leave SP pointing at bottom of frame */ + } + .ifc \processing,handle_syscall + j handle_syscall + .else + /* Capture per-interrupt SPR context to registers. */ + .ifc \c_routine, do_page_fault + mfspr r2, SPR_SYSTEM_SAVE_K_3 /* address of page fault */ + mfspr r3, SPR_SYSTEM_SAVE_K_2 /* info about page fault */ + .else + .ifc \vecnum, INT_ILL_TRANS + mfspr r2, ILL_TRANS_REASON + .else + .ifc \vecnum, INT_DOUBLE_FAULT + mfspr r2, SPR_SYSTEM_SAVE_K_2 /* double fault info from HV */ + .else + .ifc \c_routine, do_trap + mfspr r2, GPV_REASON + .else + .ifc \c_routine, op_handle_perf_interrupt + mfspr r2, PERF_COUNT_STS +#if CHIP_HAS_AUX_PERF_COUNTERS() + .else + .ifc \c_routine, op_handle_aux_perf_interrupt + mfspr r2, AUX_PERF_COUNT_STS + .endif +#endif + .endif + .endif + .endif + .endif + .endif + /* Put function pointer in r0 */ + moveli r0, hw2_last(\c_routine) + shl16insli r0, r0, hw1(\c_routine) + { + shl16insli r0, r0, hw0(\c_routine) + j \processing + } + .endif + ENDPROC(intvec_\vecname) + +#ifdef __COLLECT_LINKER_FEEDBACK__ + .pushsection .text.intvec_feedback,"ax" + .org (\vecnum << 5) + FEEDBACK_ENTER_EXPLICIT(intvec_\vecname, .intrpt1, 1 << 8) + jrp lr + .popsection +#endif + + .endm + + + /* + * Save the rest of the registers that we didn't save in the actual + * vector itself. We can't use r0-r10 inclusive here. + */ + .macro finish_interrupt_save, function + + /* If it's a syscall, save a proper orig_r0, otherwise just zero. */ + PTREGS_PTR(r52, PTREGS_OFFSET_ORIG_R0) + { + .ifc \function,handle_syscall + st r52, r0 + .else + st r52, zero + .endif + PTREGS_PTR(r52, PTREGS_OFFSET_TP) + } + st r52, tp + { + mfspr tp, CMPEXCH_VALUE + PTREGS_PTR(r52, PTREGS_OFFSET_CMPEXCH) + } + + /* + * For ordinary syscalls, we save neither caller- nor callee- + * save registers, since the syscall invoker doesn't expect the + * caller-saves to be saved, and the called kernel functions will + * take care of saving the callee-saves for us. + * + * For interrupts we save just the caller-save registers. Saving + * them is required (since the "caller" can't save them). Again, + * the called kernel functions will restore the callee-save + * registers for us appropriately. + * + * On return, we normally restore nothing special for syscalls, + * and just the caller-save registers for interrupts. + * + * However, there are some important caveats to all this: + * + * - We always save a few callee-save registers to give us + * some scratchpad registers to carry across function calls. + * + * - fork/vfork/etc require us to save all the callee-save + * registers, which we do in PTREGS_SYSCALL_ALL_REGS, below. + * + * - We always save r0..r5 and r10 for syscalls, since we need + * to reload them a bit later for the actual kernel call, and + * since we might need them for -ERESTARTNOINTR, etc. + * + * - Before invoking a signal handler, we save the unsaved + * callee-save registers so they are visible to the + * signal handler or any ptracer. + * + * - If the unsaved callee-save registers are modified, we set + * a bit in pt_regs so we know to reload them from pt_regs + * and not just rely on the kernel function unwinding. + * (Done for ptrace register writes and SA_SIGINFO handler.) + */ + { + st r52, tp + PTREGS_PTR(r52, PTREGS_OFFSET_REG(33)) + } + wh64 r52 /* cache line 4 */ + push_reg r33, r52 + push_reg r32, r52 + push_reg r31, r52 + .ifc \function,handle_syscall + push_reg r30, r52, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(30) + push_reg TREG_SYSCALL_NR_NAME, r52, \ + PTREGS_OFFSET_REG(5) - PTREGS_OFFSET_SYSCALL + .else + + push_reg r30, r52, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(30) + wh64 r52 /* cache line 3 */ + push_reg r29, r52 + push_reg r28, r52 + push_reg r27, r52 + push_reg r26, r52 + push_reg r25, r52 + push_reg r24, r52 + push_reg r23, r52 + push_reg r22, r52 + wh64 r52 /* cache line 2 */ + push_reg r21, r52 + push_reg r20, r52 + push_reg r19, r52 + push_reg r18, r52 + push_reg r17, r52 + push_reg r16, r52 + push_reg r15, r52 + push_reg r14, r52 + wh64 r52 /* cache line 1 */ + push_reg r13, r52 + push_reg r12, r52 + push_reg r11, r52 + push_reg r10, r52 + push_reg r9, r52 + push_reg r8, r52 + push_reg r7, r52 + push_reg r6, r52 + + .endif + + push_reg r5, r52 + st r52, r4 + + /* Load tp with our per-cpu offset. */ +#ifdef CONFIG_SMP + { + mfspr r20, SPR_SYSTEM_SAVE_K_0 + moveli r21, hw2_last(__per_cpu_offset) + } + { + shl16insli r21, r21, hw1(__per_cpu_offset) + bfextu r20, r20, 0, LOG2_THREAD_SIZE-1 + } + shl16insli r21, r21, hw0(__per_cpu_offset) + shl3add r20, r20, r21 + ld tp, r20 +#else + move tp, zero +#endif + + /* + * If we will be returning to the kernel, we will need to + * reset the interrupt masks to the state they had before. + * Set DISABLE_IRQ in flags iff we came from PL1 with irqs disabled. + */ + mfspr r32, SPR_EX_CONTEXT_K_1 + { + andi r32, r32, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + PTREGS_PTR(r21, PTREGS_OFFSET_FLAGS) + } + beqzt r32, 1f /* zero if from user space */ + IRQS_DISABLED(r32) /* zero if irqs enabled */ +#if PT_FLAGS_DISABLE_IRQ != 1 +# error Value of IRQS_DISABLED used to set PT_FLAGS_DISABLE_IRQ; fix +#endif +1: + .ifnc \function,handle_syscall + /* Record the fact that we saved the caller-save registers above. */ + ori r32, r32, PT_FLAGS_CALLER_SAVES + .endif + st r21, r32 + +#ifdef __COLLECT_LINKER_FEEDBACK__ + /* + * Notify the feedback routines that we were in the + * appropriate fixed interrupt vector area. Note that we + * still have ICS set at this point, so we can't invoke any + * atomic operations or we will panic. The feedback + * routines internally preserve r0..r10 and r30 up. + */ + .ifnc \function,handle_syscall + shli r20, r1, 5 + .else + moveli r20, INT_SWINT_1 << 5 + .endif + moveli r21, hw2_last(intvec_feedback) + shl16insli r21, r21, hw1(intvec_feedback) + shl16insli r21, r21, hw0(intvec_feedback) + add r20, r20, r21 + jalr r20 + + /* And now notify the feedback routines that we are here. */ + FEEDBACK_ENTER(\function) +#endif + + /* + * we've captured enough state to the stack (including in + * particular our EX_CONTEXT state) that we can now release + * the interrupt critical section and replace it with our + * standard "interrupts disabled" mask value. This allows + * synchronous interrupts (and profile interrupts) to punch + * through from this point onwards. + */ + .ifc \function,handle_nmi + IRQ_DISABLE_ALL(r20) + .else + IRQ_DISABLE(r20, r21) + .endif + mtspr INTERRUPT_CRITICAL_SECTION, zero + + /* + * Prepare the first 256 stack bytes to be rapidly accessible + * without having to fetch the background data. + */ + addi r52, sp, -64 + { + wh64 r52 + addi r52, r52, -64 + } + { + wh64 r52 + addi r52, r52, -64 + } + { + wh64 r52 + addi r52, r52, -64 + } + wh64 r52 + +#ifdef CONFIG_TRACE_IRQFLAGS + .ifnc \function,handle_nmi + /* + * We finally have enough state set up to notify the irq + * tracing code that irqs were disabled on entry to the handler. + * The TRACE_IRQS_OFF call clobbers registers r0-r29. + * For syscalls, we already have the register state saved away + * on the stack, so we don't bother to do any register saves here, + * and later we pop the registers back off the kernel stack. + * For interrupt handlers, save r0-r3 in callee-saved registers. + */ + .ifnc \function,handle_syscall + { move r30, r0; move r31, r1 } + { move r32, r2; move r33, r3 } + .endif + TRACE_IRQS_OFF + .ifnc \function,handle_syscall + { move r0, r30; move r1, r31 } + { move r2, r32; move r3, r33 } + .endif + .endif +#endif + + .endm + + /* + * Redispatch a downcall. + */ + .macro dc_dispatch vecnum, vecname + .org (\vecnum << 8) +intvec_\vecname: + j hv_downcall_dispatch + ENDPROC(intvec_\vecname) + .endm + + /* + * Common code for most interrupts. The C function we're eventually + * going to is in r0, and the faultnum is in r1; the original + * values for those registers are on the stack. + */ + .pushsection .text.handle_interrupt,"ax" +handle_interrupt: + finish_interrupt_save handle_interrupt + + /* Jump to the C routine; it should enable irqs as soon as possible. */ + { + jalr r0 + PTREGS_PTR(r0, PTREGS_OFFSET_BASE) + } + FEEDBACK_REENTER(handle_interrupt) + { + movei r30, 0 /* not an NMI */ + j interrupt_return + } + STD_ENDPROC(handle_interrupt) + +/* + * This routine takes a boolean in r30 indicating if this is an NMI. + * If so, we also expect a boolean in r31 indicating whether to + * re-enable the oprofile interrupts. + */ +STD_ENTRY(interrupt_return) + /* If we're resuming to kernel space, don't check thread flags. */ + { + bnez r30, .Lrestore_all /* NMIs don't special-case user-space */ + PTREGS_PTR(r29, PTREGS_OFFSET_EX1) + } + ld r29, r29 + andi r29, r29, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + { + beqzt r29, .Lresume_userspace + PTREGS_PTR(r29, PTREGS_OFFSET_PC) + } + + /* If we're resuming to _cpu_idle_nap, bump PC forward by 8. */ + moveli r27, hw2_last(_cpu_idle_nap) + { + ld r28, r29 + shl16insli r27, r27, hw1(_cpu_idle_nap) + } + { + shl16insli r27, r27, hw0(_cpu_idle_nap) + } + { + cmpeq r27, r27, r28 + } + { + blbc r27, .Lrestore_all + addi r28, r28, 8 + } + st r29, r28 + j .Lrestore_all + +.Lresume_userspace: + FEEDBACK_REENTER(interrupt_return) + + /* + * Disable interrupts so as to make sure we don't + * miss an interrupt that sets any of the thread flags (like + * need_resched or sigpending) between sampling and the iret. + * Routines like schedule() or do_signal() may re-enable + * interrupts before returning. + */ + IRQ_DISABLE(r20, r21) + TRACE_IRQS_OFF /* Note: clobbers registers r0-r29 */ + + /* Get base of stack in r32; note r30/31 are used as arguments here. */ + GET_THREAD_INFO(r32) + + + /* Check to see if there is any work to do before returning to user. */ + { + addi r29, r32, THREAD_INFO_FLAGS_OFFSET + moveli r1, hw1_last(_TIF_ALLWORK_MASK) + } + { + ld r29, r29 + shl16insli r1, r1, hw0(_TIF_ALLWORK_MASK) + } + and r1, r29, r1 + beqzt r1, .Lrestore_all + + /* + * Make sure we have all the registers saved for signal + * handling or single-step. Call out to C code to figure out + * exactly what we need to do for each flag bit, then if + * necessary, reload the flags and recheck. + */ + push_extra_callee_saves r0 + { + PTREGS_PTR(r0, PTREGS_OFFSET_BASE) + jal do_work_pending + } + bnez r0, .Lresume_userspace + + /* + * In the NMI case we + * omit the call to single_process_check_nohz, which normally checks + * to see if we should start or stop the scheduler tick, because + * we can't call arbitrary Linux code from an NMI context. + * We always call the homecache TLB deferral code to re-trigger + * the deferral mechanism. + * + * The other chunk of responsibility this code has is to reset the + * interrupt masks appropriately to reset irqs and NMIs. We have + * to call TRACE_IRQS_OFF and TRACE_IRQS_ON to support all the + * lockdep-type stuff, but we can't set ICS until afterwards, since + * ICS can only be used in very tight chunks of code to avoid + * tripping over various assertions that it is off. + */ +.Lrestore_all: + PTREGS_PTR(r0, PTREGS_OFFSET_EX1) + { + ld r0, r0 + PTREGS_PTR(r32, PTREGS_OFFSET_FLAGS) + } + { + andi r0, r0, SPR_EX_CONTEXT_1_1__PL_MASK + ld r32, r32 + } + bnez r0, 1f + j 2f +#if PT_FLAGS_DISABLE_IRQ != 1 +# error Assuming PT_FLAGS_DISABLE_IRQ == 1 so we can use blbct below +#endif +1: blbct r32, 2f + IRQ_DISABLE(r20,r21) + TRACE_IRQS_OFF + movei r0, 1 + mtspr INTERRUPT_CRITICAL_SECTION, r0 + beqzt r30, .Lrestore_regs + j 3f +2: TRACE_IRQS_ON + movei r0, 1 + mtspr INTERRUPT_CRITICAL_SECTION, r0 + IRQ_ENABLE(r20, r21) + beqzt r30, .Lrestore_regs +3: + + + /* + * We now commit to returning from this interrupt, since we will be + * doing things like setting EX_CONTEXT SPRs and unwinding the stack + * frame. No calls should be made to any other code after this point. + * This code should only be entered with ICS set. + * r32 must still be set to ptregs.flags. + * We launch loads to each cache line separately first, so we can + * get some parallelism out of the memory subsystem. + * We start zeroing caller-saved registers throughout, since + * that will save some cycles if this turns out to be a syscall. + */ +.Lrestore_regs: + FEEDBACK_REENTER(interrupt_return) /* called from elsewhere */ + + /* + * Rotate so we have one high bit and one low bit to test. + * - low bit says whether to restore all the callee-saved registers, + * or just r30-r33, and r52 up. + * - high bit (i.e. sign bit) says whether to restore all the + * caller-saved registers, or just r0. + */ +#if PT_FLAGS_CALLER_SAVES != 2 || PT_FLAGS_RESTORE_REGS != 4 +# error Rotate trick does not work :-) +#endif + { + rotli r20, r32, 62 + PTREGS_PTR(sp, PTREGS_OFFSET_REG(0)) + } + + /* + * Load cache lines 0, 4, 6 and 7, in that order, then use + * the last loaded value, which makes it likely that the other + * cache lines have also loaded, at which point we should be + * able to safely read all the remaining words on those cache + * lines without waiting for the memory subsystem. + */ + pop_reg r0, sp, PTREGS_OFFSET_REG(30) - PTREGS_OFFSET_REG(0) + pop_reg r30, sp, PTREGS_OFFSET_REG(52) - PTREGS_OFFSET_REG(30) + pop_reg_zero r52, r3, sp, PTREGS_OFFSET_CMPEXCH - PTREGS_OFFSET_REG(52) + pop_reg_zero r21, r27, sp, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_CMPEXCH + pop_reg_zero lr, r2, sp, PTREGS_OFFSET_PC - PTREGS_OFFSET_EX1 + { + mtspr CMPEXCH_VALUE, r21 + move r4, zero + } + pop_reg r21, sp, PTREGS_OFFSET_REG(31) - PTREGS_OFFSET_PC + { + mtspr SPR_EX_CONTEXT_K_1, lr + andi lr, lr, SPR_EX_CONTEXT_1_1__PL_MASK /* mask off ICS */ + } + { + mtspr SPR_EX_CONTEXT_K_0, r21 + move r5, zero + } + + /* Restore callee-saveds that we actually use. */ + pop_reg_zero r31, r6 + pop_reg_zero r32, r7 + pop_reg_zero r33, r8, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(33) + + /* + * If we modified other callee-saveds, restore them now. + * This is rare, but could be via ptrace or signal handler. + */ + { + move r9, zero + blbs r20, .Lrestore_callees + } +.Lcontinue_restore_regs: + + /* Check if we're returning from a syscall. */ + { + move r10, zero + bltzt r20, 1f /* no, so go restore callee-save registers */ + } + + /* + * Check if we're returning to userspace. + * Note that if we're not, we don't worry about zeroing everything. + */ + { + addli sp, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(29) + bnez lr, .Lkernel_return + } + + /* + * On return from syscall, we've restored r0 from pt_regs, but we + * clear the remainder of the caller-saved registers. We could + * restore the syscall arguments, but there's not much point, + * and it ensures user programs aren't trying to use the + * caller-saves if we clear them, as well as avoiding leaking + * kernel pointers into userspace. + */ + pop_reg_zero lr, r11, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR + pop_reg_zero tp, r12, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP + { + ld sp, sp + move r13, zero + move r14, zero + } + { move r15, zero; move r16, zero } + { move r17, zero; move r18, zero } + { move r19, zero; move r20, zero } + { move r21, zero; move r22, zero } + { move r23, zero; move r24, zero } + { move r25, zero; move r26, zero } + + /* Set r1 to errno if we are returning an error, otherwise zero. */ + { + moveli r29, 4096 + sub r1, zero, r0 + } + { + move r28, zero + cmpltu r29, r1, r29 + } + { + mnz r1, r29, r1 + move r29, zero + } + iret + + /* + * Not a syscall, so restore caller-saved registers. + * First kick off loads for cache lines 1-3, which we're touching + * for the first time here. + */ + .align 64 +1: pop_reg r29, sp, PTREGS_OFFSET_REG(21) - PTREGS_OFFSET_REG(29) + pop_reg r21, sp, PTREGS_OFFSET_REG(13) - PTREGS_OFFSET_REG(21) + pop_reg r13, sp, PTREGS_OFFSET_REG(1) - PTREGS_OFFSET_REG(13) + pop_reg r1 + pop_reg r2 + pop_reg r3 + pop_reg r4 + pop_reg r5 + pop_reg r6 + pop_reg r7 + pop_reg r8 + pop_reg r9 + pop_reg r10 + pop_reg r11 + pop_reg r12, sp, 16 + /* r13 already restored above */ + pop_reg r14 + pop_reg r15 + pop_reg r16 + pop_reg r17 + pop_reg r18 + pop_reg r19 + pop_reg r20, sp, 16 + /* r21 already restored above */ + pop_reg r22 + pop_reg r23 + pop_reg r24 + pop_reg r25 + pop_reg r26 + pop_reg r27 + pop_reg r28, sp, PTREGS_OFFSET_LR - PTREGS_OFFSET_REG(28) + /* r29 already restored above */ + bnez lr, .Lkernel_return + pop_reg lr, sp, PTREGS_OFFSET_TP - PTREGS_OFFSET_LR + pop_reg tp, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_TP + ld sp, sp + iret + + /* + * We can't restore tp when in kernel mode, since a thread might + * have migrated from another cpu and brought a stale tp value. + */ +.Lkernel_return: + pop_reg lr, sp, PTREGS_OFFSET_SP - PTREGS_OFFSET_LR + ld sp, sp + iret + + /* Restore callee-saved registers from r34 to r51. */ +.Lrestore_callees: + addli sp, sp, PTREGS_OFFSET_REG(34) - PTREGS_OFFSET_REG(29) + pop_reg r34 + pop_reg r35 + pop_reg r36 + pop_reg r37 + pop_reg r38 + pop_reg r39 + pop_reg r40 + pop_reg r41 + pop_reg r42 + pop_reg r43 + pop_reg r44 + pop_reg r45 + pop_reg r46 + pop_reg r47 + pop_reg r48 + pop_reg r49 + pop_reg r50 + pop_reg r51, sp, PTREGS_OFFSET_REG(29) - PTREGS_OFFSET_REG(51) + j .Lcontinue_restore_regs + STD_ENDPROC(interrupt_return) + + /* + * "NMI" interrupts mask ALL interrupts before calling the + * handler, and don't check thread flags, etc., on the way + * back out. In general, the only things we do here for NMIs + * are register save/restore and dataplane kernel-TLB management. + * We don't (for example) deal with start/stop of the sched tick. + */ + .pushsection .text.handle_nmi,"ax" +handle_nmi: + finish_interrupt_save handle_nmi + { + jalr r0 + PTREGS_PTR(r0, PTREGS_OFFSET_BASE) + } + FEEDBACK_REENTER(handle_nmi) + { + movei r30, 1 + move r31, r0 + } + j interrupt_return + STD_ENDPROC(handle_nmi) + + /* + * Parallel code for syscalls to handle_interrupt. + */ + .pushsection .text.handle_syscall,"ax" +handle_syscall: + finish_interrupt_save handle_syscall + + /* Enable irqs. */ + TRACE_IRQS_ON + IRQ_ENABLE(r20, r21) + + /* Bump the counter for syscalls made on this tile. */ + moveli r20, hw2_last(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) + shl16insli r20, r20, hw1(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) + shl16insli r20, r20, hw0(irq_stat + IRQ_CPUSTAT_SYSCALL_COUNT_OFFSET) + add r20, r20, tp + ld4s r21, r20 + addi r21, r21, 1 + st4 r20, r21 + + /* Trace syscalls, if requested. */ + GET_THREAD_INFO(r31) + addi r31, r31, THREAD_INFO_FLAGS_OFFSET + ld r30, r31 + andi r30, r30, _TIF_SYSCALL_TRACE + { + addi r30, r31, THREAD_INFO_STATUS_OFFSET - THREAD_INFO_FLAGS_OFFSET + beqzt r30, .Lrestore_syscall_regs + } + jal do_syscall_trace + FEEDBACK_REENTER(handle_syscall) + + /* + * We always reload our registers from the stack at this + * point. They might be valid, if we didn't build with + * TRACE_IRQFLAGS, and this isn't a dataplane tile, and we're not + * doing syscall tracing, but there are enough cases now that it + * seems simplest just to do the reload unconditionally. + */ +.Lrestore_syscall_regs: + { + ld r30, r30 + PTREGS_PTR(r11, PTREGS_OFFSET_REG(0)) + } + pop_reg r0, r11 + pop_reg r1, r11 + pop_reg r2, r11 + pop_reg r3, r11 + pop_reg r4, r11 + pop_reg r5, r11, PTREGS_OFFSET_SYSCALL - PTREGS_OFFSET_REG(5) + { + ld TREG_SYSCALL_NR_NAME, r11 + moveli r21, __NR_syscalls + } + + /* Ensure that the syscall number is within the legal range. */ + { + moveli r20, hw2(sys_call_table) + blbs r30, .Lcompat_syscall + } + { + cmpltu r21, TREG_SYSCALL_NR_NAME, r21 + shl16insli r20, r20, hw1(sys_call_table) + } + { + blbc r21, .Linvalid_syscall + shl16insli r20, r20, hw0(sys_call_table) + } +.Lload_syscall_pointer: + shl3add r20, TREG_SYSCALL_NR_NAME, r20 + ld r20, r20 + + /* Jump to syscall handler. */ + jalr r20 +.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */ + + /* + * Write our r0 onto the stack so it gets restored instead + * of whatever the user had there before. + * In compat mode, sign-extend r0 before storing it. + */ + { + PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) + blbct r30, 1f + } + addxi r0, r0, 0 +1: st r29, r0 + +.Lsyscall_sigreturn_skip: + FEEDBACK_REENTER(handle_syscall) + + /* Do syscall trace again, if requested. */ + ld r30, r31 + andi r30, r30, _TIF_SYSCALL_TRACE + beqzt r30, 1f + jal do_syscall_trace + FEEDBACK_REENTER(handle_syscall) +1: j .Lresume_userspace /* jump into middle of interrupt_return */ + +.Lcompat_syscall: + /* + * Load the base of the compat syscall table in r20, and + * range-check the syscall number (duplicated from 64-bit path). + * Sign-extend all the user's passed arguments to make them consistent. + * Also save the original "r(n)" values away in "r(11+n)" in + * case the syscall table entry wants to validate them. + */ + moveli r20, hw2(compat_sys_call_table) + { + cmpltu r21, TREG_SYSCALL_NR_NAME, r21 + shl16insli r20, r20, hw1(compat_sys_call_table) + } + { + blbc r21, .Linvalid_syscall + shl16insli r20, r20, hw0(compat_sys_call_table) + } + { move r11, r0; addxi r0, r0, 0 } + { move r12, r1; addxi r1, r1, 0 } + { move r13, r2; addxi r2, r2, 0 } + { move r14, r3; addxi r3, r3, 0 } + { move r15, r4; addxi r4, r4, 0 } + { move r16, r5; addxi r5, r5, 0 } + j .Lload_syscall_pointer + +.Linvalid_syscall: + /* Report an invalid syscall back to the user program */ + { + PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) + movei r28, -ENOSYS + } + st r29, r28 + j .Lresume_userspace /* jump into middle of interrupt_return */ + STD_ENDPROC(handle_syscall) + + /* Return the address for oprofile to suppress in backtraces. */ +STD_ENTRY_SECTION(handle_syscall_link_address, .text.handle_syscall) + lnk r0 + { + addli r0, r0, .Lhandle_syscall_link - . + jrp lr + } + STD_ENDPROC(handle_syscall_link_address) + +STD_ENTRY(ret_from_fork) + jal sim_notify_fork + jal schedule_tail + FEEDBACK_REENTER(ret_from_fork) + j .Lresume_userspace + STD_ENDPROC(ret_from_fork) + +/* Various stub interrupt handlers and syscall handlers */ + +STD_ENTRY_LOCAL(_kernel_double_fault) + mfspr r1, SPR_EX_CONTEXT_K_0 + move r2, lr + move r3, sp + move r4, r52 + addi sp, sp, -C_ABI_SAVE_AREA_SIZE + j kernel_double_fault + STD_ENDPROC(_kernel_double_fault) + +STD_ENTRY_LOCAL(bad_intr) + mfspr r2, SPR_EX_CONTEXT_K_0 + panic "Unhandled interrupt %#x: PC %#lx" + STD_ENDPROC(bad_intr) + +/* Put address of pt_regs in reg and jump. */ +#define PTREGS_SYSCALL(x, reg) \ + STD_ENTRY(_##x); \ + { \ + PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \ + j x \ + }; \ + STD_ENDPROC(_##x) + +/* + * Special-case sigreturn to not write r0 to the stack on return. + * This is technically more efficient, but it also avoids difficulties + * in the 64-bit OS when handling 32-bit compat code, since we must not + * sign-extend r0 for the sigreturn return-value case. + */ +#define PTREGS_SYSCALL_SIGRETURN(x, reg) \ + STD_ENTRY(_##x); \ + addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \ + { \ + PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \ + j x \ + }; \ + STD_ENDPROC(_##x) + +PTREGS_SYSCALL(sys_execve, r3) +PTREGS_SYSCALL(sys_sigaltstack, r2) +PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0) +#ifdef CONFIG_COMPAT +PTREGS_SYSCALL(compat_sys_execve, r3) +PTREGS_SYSCALL(compat_sys_sigaltstack, r2) +PTREGS_SYSCALL_SIGRETURN(compat_sys_rt_sigreturn, r0) +#endif + +/* Save additional callee-saves to pt_regs, put address in r4 and jump. */ +STD_ENTRY(_sys_clone) + push_extra_callee_saves r4 + j sys_clone + STD_ENDPROC(_sys_clone) + +/* The single-step support may need to read all the registers. */ +int_unalign: + push_extra_callee_saves r0 + j do_trap + +/* Include .intrpt1 array of interrupt vectors */ + .section ".intrpt1", "ax" + +#define op_handle_perf_interrupt bad_intr +#define op_handle_aux_perf_interrupt bad_intr + +#ifndef CONFIG_HARDWALL +#define do_hardwall_trap bad_intr +#endif + + int_hand INT_MEM_ERROR, MEM_ERROR, bad_intr + int_hand INT_SINGLE_STEP_3, SINGLE_STEP_3, bad_intr +#if CONFIG_KERNEL_PL == 2 + int_hand INT_SINGLE_STEP_2, SINGLE_STEP_2, gx_singlestep_handle + int_hand INT_SINGLE_STEP_1, SINGLE_STEP_1, bad_intr +#else + int_hand INT_SINGLE_STEP_2, SINGLE_STEP_2, bad_intr + int_hand INT_SINGLE_STEP_1, SINGLE_STEP_1, gx_singlestep_handle +#endif + int_hand INT_SINGLE_STEP_0, SINGLE_STEP_0, bad_intr + int_hand INT_IDN_COMPLETE, IDN_COMPLETE, bad_intr + int_hand INT_UDN_COMPLETE, UDN_COMPLETE, bad_intr + int_hand INT_ITLB_MISS, ITLB_MISS, do_page_fault + int_hand INT_ILL, ILL, do_trap + int_hand INT_GPV, GPV, do_trap + int_hand INT_IDN_ACCESS, IDN_ACCESS, do_trap + int_hand INT_UDN_ACCESS, UDN_ACCESS, do_trap + int_hand INT_SWINT_3, SWINT_3, do_trap + int_hand INT_SWINT_2, SWINT_2, do_trap + int_hand INT_SWINT_1, SWINT_1, SYSCALL, handle_syscall + int_hand INT_SWINT_0, SWINT_0, do_trap + int_hand INT_ILL_TRANS, ILL_TRANS, do_trap + int_hand INT_UNALIGN_DATA, UNALIGN_DATA, int_unalign + int_hand INT_DTLB_MISS, DTLB_MISS, do_page_fault + int_hand INT_DTLB_ACCESS, DTLB_ACCESS, do_page_fault + int_hand INT_IDN_FIREWALL, IDN_FIREWALL, bad_intr + int_hand INT_UDN_FIREWALL, UDN_FIREWALL, do_hardwall_trap + int_hand INT_TILE_TIMER, TILE_TIMER, do_timer_interrupt + int_hand INT_IDN_TIMER, IDN_TIMER, bad_intr + int_hand INT_UDN_TIMER, UDN_TIMER, bad_intr + int_hand INT_IDN_AVAIL, IDN_AVAIL, bad_intr + int_hand INT_UDN_AVAIL, UDN_AVAIL, bad_intr + int_hand INT_IPI_3, IPI_3, bad_intr +#if CONFIG_KERNEL_PL == 2 + int_hand INT_IPI_2, IPI_2, tile_dev_intr + int_hand INT_IPI_1, IPI_1, bad_intr +#else + int_hand INT_IPI_2, IPI_2, bad_intr + int_hand INT_IPI_1, IPI_1, tile_dev_intr +#endif + int_hand INT_IPI_0, IPI_0, bad_intr + int_hand INT_PERF_COUNT, PERF_COUNT, \ + op_handle_perf_interrupt, handle_nmi + int_hand INT_AUX_PERF_COUNT, AUX_PERF_COUNT, \ + op_handle_perf_interrupt, handle_nmi + int_hand INT_INTCTRL_3, INTCTRL_3, bad_intr +#if CONFIG_KERNEL_PL == 2 + dc_dispatch INT_INTCTRL_2, INTCTRL_2 + int_hand INT_INTCTRL_1, INTCTRL_1, bad_intr +#else + int_hand INT_INTCTRL_2, INTCTRL_2, bad_intr + dc_dispatch INT_INTCTRL_1, INTCTRL_1 +#endif + int_hand INT_INTCTRL_0, INTCTRL_0, bad_intr + int_hand INT_MESSAGE_RCV_DWNCL, MESSAGE_RCV_DWNCL, \ + hv_message_intr + int_hand INT_DEV_INTR_DWNCL, DEV_INTR_DWNCL, bad_intr + int_hand INT_I_ASID, I_ASID, bad_intr + int_hand INT_D_ASID, D_ASID, bad_intr + int_hand INT_DOUBLE_FAULT, DOUBLE_FAULT, do_trap + + /* Synthetic interrupt delivered only by the simulator */ + int_hand INT_BREAKPOINT, BREAKPOINT, do_breakpoint diff --git a/arch/tile/kernel/module.c b/arch/tile/kernel/module.c index e2ab82b7c7e7..f68df69f1f67 100644 --- a/arch/tile/kernel/module.c +++ b/arch/tile/kernel/module.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <asm/opcode-tile.h> #include <asm/pgtable.h> +#include <asm/homecache.h> #ifdef __tilegx__ # define Elf_Rela Elf64_Rela @@ -86,8 +87,13 @@ error: void module_free(struct module *mod, void *module_region) { vfree(module_region); + + /* Globally flush the L1 icache. */ + flush_remote(0, HV_FLUSH_EVICT_L1I, cpu_online_mask, + 0, 0, 0, NULL, NULL, 0); + /* - * FIXME: If module_region == mod->init_region, trim exception + * FIXME: If module_region == mod->module_init, trim exception * table entries. */ } diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 658752b2835e..658f2ce426a4 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -244,7 +244,7 @@ EXPORT_SYMBOL(dma_sync_single_range_for_device); * dma_alloc_noncoherent() returns non-cacheable memory, so there's no * need to do any flushing here. */ -void dma_cache_sync(void *vaddr, size_t size, +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { } diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index ea38f0c9ec7c..6d4cb5d7a9fd 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -1,5 +1,5 @@ /* - * Copyright 2010 Tilera Corporation. All Rights Reserved. + * Copyright 2011 Tilera Corporation. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -59,6 +59,7 @@ int __write_once tile_plx_gen1; static struct pci_controller controllers[TILE_NUM_PCIE]; static int num_controllers; +static int pci_scan_flags[TILE_NUM_PCIE]; static struct pci_ops tile_cfg_ops; @@ -79,7 +80,7 @@ EXPORT_SYMBOL(pcibios_align_resource); * controller_id is the controller number, config type is 0 or 1 for * config0 or config1 operations. */ -static int __init tile_pcie_open(int controller_id, int config_type) +static int __devinit tile_pcie_open(int controller_id, int config_type) { char filename[32]; int fd; @@ -95,7 +96,7 @@ static int __init tile_pcie_open(int controller_id, int config_type) /* * Get the IRQ numbers from the HV and set up the handlers for them. */ -static int __init tile_init_irqs(int controller_id, +static int __devinit tile_init_irqs(int controller_id, struct pci_controller *controller) { char filename[32]; @@ -139,71 +140,74 @@ static int __init tile_init_irqs(int controller_id, * * Returns the number of controllers discovered. */ -int __init tile_pci_init(void) +int __devinit tile_pci_init(void) { int i; pr_info("PCI: Searching for controllers...\n"); + /* Re-init number of PCIe controllers to support hot-plug feature. */ + num_controllers = 0; + /* Do any configuration we need before using the PCIe */ for (i = 0; i < TILE_NUM_PCIE; i++) { - int hv_cfg_fd0 = -1; - int hv_cfg_fd1 = -1; - int hv_mem_fd = -1; - char name[32]; - struct pci_controller *controller; - /* - * Open the fd to the HV. If it fails then this - * device doesn't exist. + * To see whether we need a real config op based on + * the results of pcibios_init(), to support PCIe hot-plug. */ - hv_cfg_fd0 = tile_pcie_open(i, 0); - if (hv_cfg_fd0 < 0) - continue; - hv_cfg_fd1 = tile_pcie_open(i, 1); - if (hv_cfg_fd1 < 0) { - pr_err("PCI: Couldn't open config fd to HV " - "for controller %d\n", i); - goto err_cont; - } - - sprintf(name, "pcie/%d/mem", i); - hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); - if (hv_mem_fd < 0) { - pr_err("PCI: Could not open mem fd to HV!\n"); - goto err_cont; - } + if (pci_scan_flags[i] == 0) { + int hv_cfg_fd0 = -1; + int hv_cfg_fd1 = -1; + int hv_mem_fd = -1; + char name[32]; + struct pci_controller *controller; + + /* + * Open the fd to the HV. If it fails then this + * device doesn't exist. + */ + hv_cfg_fd0 = tile_pcie_open(i, 0); + if (hv_cfg_fd0 < 0) + continue; + hv_cfg_fd1 = tile_pcie_open(i, 1); + if (hv_cfg_fd1 < 0) { + pr_err("PCI: Couldn't open config fd to HV " + "for controller %d\n", i); + goto err_cont; + } - pr_info("PCI: Found PCI controller #%d\n", i); + sprintf(name, "pcie/%d/mem", i); + hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0); + if (hv_mem_fd < 0) { + pr_err("PCI: Could not open mem fd to HV!\n"); + goto err_cont; + } - controller = &controllers[num_controllers]; + pr_info("PCI: Found PCI controller #%d\n", i); - if (tile_init_irqs(i, controller)) { - pr_err("PCI: Could not initialize " - "IRQs, aborting.\n"); - goto err_cont; - } + controller = &controllers[i]; - controller->index = num_controllers; - controller->hv_cfg_fd[0] = hv_cfg_fd0; - controller->hv_cfg_fd[1] = hv_cfg_fd1; - controller->hv_mem_fd = hv_mem_fd; - controller->first_busno = 0; - controller->last_busno = 0xff; - controller->ops = &tile_cfg_ops; + controller->index = i; + controller->hv_cfg_fd[0] = hv_cfg_fd0; + controller->hv_cfg_fd[1] = hv_cfg_fd1; + controller->hv_mem_fd = hv_mem_fd; + controller->first_busno = 0; + controller->last_busno = 0xff; + controller->ops = &tile_cfg_ops; - num_controllers++; - continue; + num_controllers++; + continue; err_cont: - if (hv_cfg_fd0 >= 0) - hv_dev_close(hv_cfg_fd0); - if (hv_cfg_fd1 >= 0) - hv_dev_close(hv_cfg_fd1); - if (hv_mem_fd >= 0) - hv_dev_close(hv_mem_fd); - continue; + if (hv_cfg_fd0 >= 0) + hv_dev_close(hv_cfg_fd0); + if (hv_cfg_fd1 >= 0) + hv_dev_close(hv_cfg_fd1); + if (hv_mem_fd >= 0) + hv_dev_close(hv_mem_fd); + continue; + } } /* @@ -232,7 +236,7 @@ static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) } -static void __init fixup_read_and_payload_sizes(void) +static void __devinit fixup_read_and_payload_sizes(void) { struct pci_dev *dev = NULL; int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */ @@ -282,7 +286,7 @@ static void __init fixup_read_and_payload_sizes(void) * The controllers have been set up by the time we get here, by a call to * tile_pci_init. */ -static int __init pcibios_init(void) +int __devinit pcibios_init(void) { int i; @@ -296,25 +300,36 @@ static int __init pcibios_init(void) mdelay(250); /* Scan all of the recorded PCI controllers. */ - for (i = 0; i < num_controllers; i++) { - struct pci_controller *controller = &controllers[i]; - struct pci_bus *bus; - - pr_info("PCI: initializing controller #%d\n", i); - + for (i = 0; i < TILE_NUM_PCIE; i++) { /* - * This comes from the generic Linux PCI driver. - * - * It reads the PCI tree for this bus into the Linux - * data structures. - * - * This is inlined in linux/pci.h and calls into - * pci_scan_bus_parented() in probe.c. + * Do real pcibios init ops if the controller is initialized + * by tile_pci_init() successfully and not initialized by + * pcibios_init() yet to support PCIe hot-plug. */ - bus = pci_scan_bus(0, controller->ops, controller); - controller->root_bus = bus; - controller->last_busno = bus->subordinate; + if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { + struct pci_controller *controller = &controllers[i]; + struct pci_bus *bus; + if (tile_init_irqs(i, controller)) { + pr_err("PCI: Could not initialize IRQs\n"); + continue; + } + + pr_info("PCI: initializing controller #%d\n", i); + + /* + * This comes from the generic Linux PCI driver. + * + * It reads the PCI tree for this bus into the Linux + * data structures. + * + * This is inlined in linux/pci.h and calls into + * pci_scan_bus_parented() in probe.c. + */ + bus = pci_scan_bus(0, controller->ops, controller); + controller->root_bus = bus; + controller->last_busno = bus->subordinate; + } } /* Do machine dependent PCI interrupt routing */ @@ -326,34 +341,45 @@ static int __init pcibios_init(void) * It allocates all of the resources (I/O memory, etc) * associated with the devices read in above. */ - pci_assign_unassigned_resources(); /* Configure the max_read_size and max_payload_size values. */ fixup_read_and_payload_sizes(); /* Record the I/O resources in the PCI controller structure. */ - for (i = 0; i < num_controllers; i++) { - struct pci_bus *root_bus = controllers[i].root_bus; - struct pci_bus *next_bus; - struct pci_dev *dev; - - list_for_each_entry(dev, &root_bus->devices, bus_list) { - /* Find the PCI host controller, ie. the 1st bridge. */ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && - (PCI_SLOT(dev->devfn) == 0)) { - next_bus = dev->subordinate; - controllers[i].mem_resources[0] = - *next_bus->resource[0]; - controllers[i].mem_resources[1] = - *next_bus->resource[1]; - controllers[i].mem_resources[2] = - *next_bus->resource[2]; - - break; + for (i = 0; i < TILE_NUM_PCIE; i++) { + /* + * Do real pcibios init ops if the controller is initialized + * by tile_pci_init() successfully and not initialized by + * pcibios_init() yet to support PCIe hot-plug. + */ + if (pci_scan_flags[i] == 0 && controllers[i].ops != NULL) { + struct pci_bus *root_bus = controllers[i].root_bus; + struct pci_bus *next_bus; + struct pci_dev *dev; + + list_for_each_entry(dev, &root_bus->devices, bus_list) { + /* + * Find the PCI host controller, ie. the 1st + * bridge. + */ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && + (PCI_SLOT(dev->devfn) == 0)) { + next_bus = dev->subordinate; + controllers[i].mem_resources[0] = + *next_bus->resource[0]; + controllers[i].mem_resources[1] = + *next_bus->resource[1]; + controllers[i].mem_resources[2] = + *next_bus->resource[2]; + + /* Setup flags. */ + pci_scan_flags[i] = 1; + + break; + } } } - } return 0; @@ -381,7 +407,7 @@ char __devinit *pcibios_setup(char *str) /* * This is called from the generic Linux layer. */ -void __init pcibios_update_irq(struct pci_dev *dev, int irq) +void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) { pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); } diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c index d0065103eb7b..9c45d8bbdf57 100644 --- a/arch/tile/kernel/process.c +++ b/arch/tile/kernel/process.c @@ -25,10 +25,13 @@ #include <linux/hardirq.h> #include <linux/syscalls.h> #include <linux/kernel.h> +#include <linux/tracehook.h> +#include <linux/signal.h> #include <asm/system.h> #include <asm/stack.h> #include <asm/homecache.h> #include <asm/syscalls.h> +#include <asm/traps.h> #ifdef CONFIG_HARDWALL #include <asm/hardwall.h> #endif @@ -546,6 +549,51 @@ struct task_struct *__sched _switch_to(struct task_struct *prev, return __switch_to(prev, next, next_current_ksp0(next)); } +/* + * This routine is called on return from interrupt if any of the + * TIF_WORK_MASK flags are set in thread_info->flags. It is + * entered with interrupts disabled so we don't miss an event + * that modified the thread_info flags. If any flag is set, we + * handle it and return, and the calling assembly code will + * re-disable interrupts, reload the thread flags, and call back + * if more flags need to be handled. + * + * We return whether we need to check the thread_info flags again + * or not. Note that we don't clear TIF_SINGLESTEP here, so it's + * important that it be tested last, and then claim that we don't + * need to recheck the flags. + */ +int do_work_pending(struct pt_regs *regs, u32 thread_info_flags) +{ + if (thread_info_flags & _TIF_NEED_RESCHED) { + schedule(); + return 1; + } +#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() + if (thread_info_flags & _TIF_ASYNC_TLB) { + do_async_page_fault(regs); + return 1; + } +#endif + if (thread_info_flags & _TIF_SIGPENDING) { + do_signal(regs); + return 1; + } + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + if (current->replacement_session_keyring) + key_replace_session_keyring(); + return 1; + } + if (thread_info_flags & _TIF_SINGLESTEP) { + if ((regs->ex1 & SPR_EX_CONTEXT_1_1__PL_MASK) == 0) + single_step_once(regs); + return 0; + } + panic("work_pending: bad flags %#x\n", thread_info_flags); +} + /* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */ SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp, void __user *, parent_tidptr, void __user *, child_tidptr, @@ -582,8 +630,8 @@ out: #ifdef CONFIG_COMPAT long compat_sys_execve(const char __user *path, - const compat_uptr_t __user *argv, - const compat_uptr_t __user *envp, + compat_uptr_t __user *argv, + compat_uptr_t __user *envp, struct pt_regs *regs) { long error; diff --git a/arch/tile/kernel/regs_64.S b/arch/tile/kernel/regs_64.S new file mode 100644 index 000000000000..f748c1e85285 --- /dev/null +++ b/arch/tile/kernel/regs_64.S @@ -0,0 +1,145 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/linkage.h> +#include <asm/system.h> +#include <asm/ptrace.h> +#include <asm/asm-offsets.h> +#include <arch/spr_def.h> +#include <asm/processor.h> + +/* + * See <asm/system.h>; called with prev and next task_struct pointers. + * "prev" is returned in r0 for _switch_to and also for ret_from_fork. + * + * We want to save pc/sp in "prev", and get the new pc/sp from "next". + * We also need to save all the callee-saved registers on the stack. + * + * Intel enables/disables access to the hardware cycle counter in + * seccomp (secure computing) environments if necessary, based on + * has_secure_computing(). We might want to do this at some point, + * though it would require virtualizing the other SPRs under WORLD_ACCESS. + * + * Since we're saving to the stack, we omit sp from this list. + * And for parallels with other architectures, we save lr separately, + * in the thread_struct itself (as the "pc" field). + * + * This code also needs to be aligned with process.c copy_thread() + */ + +#if CALLEE_SAVED_REGS_COUNT != 24 +# error Mismatch between <asm/system.h> and kernel/entry.S +#endif +#define FRAME_SIZE ((2 + CALLEE_SAVED_REGS_COUNT) * 8) + +#define SAVE_REG(r) { st r12, r; addi r12, r12, 8 } +#define LOAD_REG(r) { ld r, r12; addi r12, r12, 8 } +#define FOR_EACH_CALLEE_SAVED_REG(f) \ + f(r30); f(r31); \ + f(r32); f(r33); f(r34); f(r35); f(r36); f(r37); f(r38); f(r39); \ + f(r40); f(r41); f(r42); f(r43); f(r44); f(r45); f(r46); f(r47); \ + f(r48); f(r49); f(r50); f(r51); f(r52); + +STD_ENTRY_SECTION(__switch_to, .sched.text) + { + move r10, sp + st sp, lr + } + { + addli r11, sp, -FRAME_SIZE + 8 + addli sp, sp, -FRAME_SIZE + } + { + st r11, r10 + addli r4, r1, TASK_STRUCT_THREAD_KSP_OFFSET + } + { + ld r13, r4 /* Load new sp to a temp register early. */ + addi r12, sp, 16 + } + FOR_EACH_CALLEE_SAVED_REG(SAVE_REG) + addli r3, r0, TASK_STRUCT_THREAD_KSP_OFFSET + { + st r3, sp + addli r3, r0, TASK_STRUCT_THREAD_PC_OFFSET + } + { + st r3, lr + addli r4, r1, TASK_STRUCT_THREAD_PC_OFFSET + } + { + ld lr, r4 + addi r12, r13, 16 + } + { + /* Update sp and ksp0 simultaneously to avoid backtracer warnings. */ + move sp, r13 + mtspr SPR_SYSTEM_SAVE_K_0, r2 + } + FOR_EACH_CALLEE_SAVED_REG(LOAD_REG) +.L__switch_to_pc: + { + addli sp, sp, FRAME_SIZE + jrp lr /* r0 is still valid here, so return it */ + } + STD_ENDPROC(__switch_to) + +/* Return a suitable address for the backtracer for suspended threads */ +STD_ENTRY_SECTION(get_switch_to_pc, .sched.text) + lnk r0 + { + addli r0, r0, .L__switch_to_pc - . + jrp lr + } + STD_ENDPROC(get_switch_to_pc) + +STD_ENTRY(get_pt_regs) + .irp reg, r0, r1, r2, r3, r4, r5, r6, r7, \ + r8, r9, r10, r11, r12, r13, r14, r15, \ + r16, r17, r18, r19, r20, r21, r22, r23, \ + r24, r25, r26, r27, r28, r29, r30, r31, \ + r32, r33, r34, r35, r36, r37, r38, r39, \ + r40, r41, r42, r43, r44, r45, r46, r47, \ + r48, r49, r50, r51, r52, tp, sp + { + st r0, \reg + addi r0, r0, 8 + } + .endr + { + st r0, lr + addi r0, r0, PTREGS_OFFSET_PC - PTREGS_OFFSET_LR + } + lnk r1 + { + st r0, r1 + addi r0, r0, PTREGS_OFFSET_EX1 - PTREGS_OFFSET_PC + } + mfspr r1, INTERRUPT_CRITICAL_SECTION + shli r1, r1, SPR_EX_CONTEXT_1_1__ICS_SHIFT + ori r1, r1, KERNEL_PL + { + st r0, r1 + addi r0, r0, PTREGS_OFFSET_FAULTNUM - PTREGS_OFFSET_EX1 + } + { + st r0, zero /* clear faultnum */ + addi r0, r0, PTREGS_OFFSET_ORIG_R0 - PTREGS_OFFSET_FAULTNUM + } + { + st r0, zero /* clear orig_r0 */ + addli r0, r0, -PTREGS_OFFSET_ORIG_R0 /* restore r0 to base */ + } + jrp lr + STD_ENDPROC(get_pt_regs) diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index 3696b1832566..6cdc9ba55fe0 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -912,6 +912,8 @@ void __cpuinit setup_cpu(int boot) #endif } +#ifdef CONFIG_BLK_DEV_INITRD + static int __initdata set_initramfs_file; static char __initdata initramfs_file[128] = "initramfs.cpio.gz"; @@ -969,6 +971,10 @@ void __init free_initrd_mem(unsigned long begin, unsigned long end) free_bootmem(__pa(begin), end - begin); } +#else +static inline void load_hv_initrd(void) {} +#endif /* CONFIG_BLK_DEV_INITRD */ + static void __init validate_hv(void) { /* diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c index 1260321155f1..bedaf4e9f3a7 100644 --- a/arch/tile/kernel/signal.c +++ b/arch/tile/kernel/signal.c @@ -39,7 +39,6 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) - SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss, stack_t __user *, uoss, struct pt_regs *, regs) { @@ -78,6 +77,13 @@ int restore_sigcontext(struct pt_regs *regs, return err; } +void signal_fault(const char *type, struct pt_regs *regs, + void __user *frame, int sig) +{ + trace_unhandled_signal(type, regs, (unsigned long)frame, SIGSEGV); + force_sigsegv(sig, current); +} + /* The assembly shim for this function arranges to ignore the return value. */ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs) { @@ -105,7 +111,7 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs) return 0; badframe: - force_sig(SIGSEGV, current); + signal_fault("bad sigreturn frame", regs, frame, 0); return 0; } @@ -231,7 +237,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, return 0; give_sigsegv: - force_sigsegv(sig, current); + signal_fault("bad setup frame", regs, frame, sig); return -EFAULT; } @@ -245,7 +251,6 @@ static int handle_signal(unsigned long sig, siginfo_t *info, { int ret; - /* Are we from a system call? */ if (regs->faultnum == INT_SWINT_1) { /* If so, check system call restarting.. */ @@ -363,3 +368,118 @@ done: /* Avoid double syscall restart if there are nested signals. */ regs->faultnum = INT_SWINT_1_SIGRETURN; } + +int show_unhandled_signals = 1; + +static int __init crashinfo(char *str) +{ + unsigned long val; + const char *word; + + if (*str == '\0') + val = 2; + else if (*str != '=' || strict_strtoul(++str, 0, &val) != 0) + return 0; + show_unhandled_signals = val; + switch (show_unhandled_signals) { + case 0: + word = "No"; + break; + case 1: + word = "One-line"; + break; + default: + word = "Detailed"; + break; + } + pr_info("%s crash reports will be generated on the console\n", word); + return 1; +} +__setup("crashinfo", crashinfo); + +static void dump_mem(void __user *address) +{ + void __user *addr; + enum { region_size = 256, bytes_per_line = 16 }; + int i, j, k; + int found_readable_mem = 0; + + pr_err("\n"); + if (!access_ok(VERIFY_READ, address, 1)) { + pr_err("Not dumping at address 0x%lx (kernel address)\n", + (unsigned long)address); + return; + } + + addr = (void __user *) + (((unsigned long)address & -bytes_per_line) - region_size/2); + if (addr > address) + addr = NULL; + for (i = 0; i < region_size; + addr += bytes_per_line, i += bytes_per_line) { + unsigned char buf[bytes_per_line]; + char line[100]; + if (copy_from_user(buf, addr, bytes_per_line)) + continue; + if (!found_readable_mem) { + pr_err("Dumping memory around address 0x%lx:\n", + (unsigned long)address); + found_readable_mem = 1; + } + j = sprintf(line, REGFMT":", (unsigned long)addr); + for (k = 0; k < bytes_per_line; ++k) + j += sprintf(&line[j], " %02x", buf[k]); + pr_err("%s\n", line); + } + if (!found_readable_mem) + pr_err("No readable memory around address 0x%lx\n", + (unsigned long)address); +} + +void trace_unhandled_signal(const char *type, struct pt_regs *regs, + unsigned long address, int sig) +{ + struct task_struct *tsk = current; + + if (show_unhandled_signals == 0) + return; + + /* If the signal is handled, don't show it here. */ + if (!is_global_init(tsk)) { + void __user *handler = + tsk->sighand->action[sig-1].sa.sa_handler; + if (handler != SIG_IGN && handler != SIG_DFL) + return; + } + + /* Rate-limit the one-line output, not the detailed output. */ + if (show_unhandled_signals <= 1 && !printk_ratelimit()) + return; + + printk("%s%s[%d]: %s at %lx pc "REGFMT" signal %d", + task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, + tsk->comm, task_pid_nr(tsk), type, address, regs->pc, sig); + + print_vma_addr(KERN_CONT " in ", regs->pc); + + printk(KERN_CONT "\n"); + + if (show_unhandled_signals > 1) { + switch (sig) { + case SIGILL: + case SIGFPE: + case SIGSEGV: + case SIGBUS: + pr_err("User crash: signal %d," + " trap %ld, address 0x%lx\n", + sig, regs->faultnum, address); + show_regs(regs); + dump_mem((void __user *)address); + break; + default: + pr_err("User crash: signal %d, trap %ld\n", + sig, regs->faultnum); + break; + } + } +} diff --git a/arch/tile/kernel/single_step.c b/arch/tile/kernel/single_step.c index 84a729e06ec4..4032ca8e51b6 100644 --- a/arch/tile/kernel/single_step.c +++ b/arch/tile/kernel/single_step.c @@ -186,6 +186,8 @@ static tile_bundle_bits rewrite_load_store_unaligned( .si_code = SEGV_MAPERR, .si_addr = addr }; + trace_unhandled_signal("segfault", regs, + (unsigned long)addr, SIGSEGV); force_sig_info(info.si_signo, &info, current); return (tile_bundle_bits) 0; } @@ -196,6 +198,8 @@ static tile_bundle_bits rewrite_load_store_unaligned( .si_code = BUS_ADRALN, .si_addr = addr }; + trace_unhandled_signal("unaligned trap", regs, + (unsigned long)addr, SIGBUS); force_sig_info(info.si_signo, &info, current); return (tile_bundle_bits) 0; } @@ -318,6 +322,14 @@ void single_step_once(struct pt_regs *regs) " .popsection\n" ); + /* + * Enable interrupts here to allow touching userspace and the like. + * The callers expect this: do_trap() already has interrupts + * enabled, and do_work_pending() handles functions that enable + * interrupts internally. + */ + local_irq_enable(); + if (state == NULL) { /* allocate a page of writable, executable memory */ state = kmalloc(sizeof(struct single_step_state), GFP_KERNEL); diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c index dd81713a90dc..37ee4d037e0b 100644 --- a/arch/tile/kernel/stack.c +++ b/arch/tile/kernel/stack.c @@ -36,7 +36,7 @@ #define KBT_LOOP 3 /* Backtrace entered a loop */ /* Is address on the specified kernel stack? */ -static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp) +static int in_kernel_stack(struct KBacktraceIterator *kbt, unsigned long sp) { ulong kstack_base = (ulong) kbt->task->stack; if (kstack_base == 0) /* corrupt task pointer; just follow stack... */ @@ -45,7 +45,7 @@ static int in_kernel_stack(struct KBacktraceIterator *kbt, VirtualAddress sp) } /* Is address valid for reading? */ -static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address) +static int valid_address(struct KBacktraceIterator *kbt, unsigned long address) { HV_PTE *l1_pgtable = kbt->pgtable; HV_PTE *l2_pgtable; @@ -97,7 +97,7 @@ static int valid_address(struct KBacktraceIterator *kbt, VirtualAddress address) } /* Callback for backtracer; basically a glorified memcpy */ -static bool read_memory_func(void *result, VirtualAddress address, +static bool read_memory_func(void *result, unsigned long address, unsigned int size, void *vkbt) { int retval; @@ -124,7 +124,7 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt) { const char *fault = NULL; /* happy compiler */ char fault_buf[64]; - VirtualAddress sp = kbt->it.sp; + unsigned long sp = kbt->it.sp; struct pt_regs *p; if (!in_kernel_stack(kbt, sp)) @@ -163,7 +163,7 @@ static struct pt_regs *valid_fault_handler(struct KBacktraceIterator* kbt) } /* Is the pc pointing to a sigreturn trampoline? */ -static int is_sigreturn(VirtualAddress pc) +static int is_sigreturn(unsigned long pc) { return (pc == VDSO_BASE); } @@ -260,7 +260,7 @@ static void validate_stack(struct pt_regs *regs) void KBacktraceIterator_init(struct KBacktraceIterator *kbt, struct task_struct *t, struct pt_regs *regs) { - VirtualAddress pc, lr, sp, r52; + unsigned long pc, lr, sp, r52; int is_current; /* @@ -331,7 +331,7 @@ EXPORT_SYMBOL(KBacktraceIterator_end); void KBacktraceIterator_next(struct KBacktraceIterator *kbt) { - VirtualAddress old_pc = kbt->it.pc, old_sp = kbt->it.sp; + unsigned long old_pc = kbt->it.pc, old_sp = kbt->it.sp; kbt->new_context = 0; if (!backtrace_next(&kbt->it) && !KBacktraceIterator_restart(kbt)) { kbt->end = KBT_DONE; diff --git a/arch/tile/kernel/sys.c b/arch/tile/kernel/sys.c index e2187d24a9b4..cb44ba7ccd2d 100644 --- a/arch/tile/kernel/sys.c +++ b/arch/tile/kernel/sys.c @@ -56,13 +56,6 @@ ssize_t sys32_readahead(int fd, u32 offset_lo, u32 offset_hi, u32 count) return sys_readahead(fd, ((loff_t)offset_hi << 32) | offset_lo, count); } -long sys32_fadvise64(int fd, u32 offset_lo, u32 offset_hi, - u32 len, int advice) -{ - return sys_fadvise64_64(fd, ((loff_t)offset_hi << 32) | offset_lo, - len, advice); -} - int sys32_fadvise64_64(int fd, u32 offset_lo, u32 offset_hi, u32 len_lo, u32 len_hi, int advice) { @@ -103,10 +96,8 @@ SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, #ifndef __tilegx__ /* See comments at the top of the file. */ -#define sys_fadvise64 sys32_fadvise64 #define sys_fadvise64_64 sys32_fadvise64_64 #define sys_readahead sys32_readahead -#define sys_sync_file_range sys_sync_file_range2 #endif /* Call the trampolines to manage pt_regs where necessary. */ diff --git a/arch/tile/kernel/tile-desc_32.c b/arch/tile/kernel/tile-desc_32.c index 69af0e150f78..7e31a1285788 100644 --- a/arch/tile/kernel/tile-desc_32.c +++ b/arch/tile/kernel/tile-desc_32.c @@ -2413,12 +2413,13 @@ const struct tile_operand tile_operands[43] = -/* Given a set of bundle bits and the lookup FSM for a specific pipe, - * returns which instruction the bundle contains in that pipe. +/* Given a set of bundle bits and a specific pipe, returns which + * instruction the bundle contains in that pipe. */ -static const struct tile_opcode * -find_opcode(tile_bundle_bits bits, const unsigned short *table) +const struct tile_opcode * +find_opcode(tile_bundle_bits bits, tile_pipeline pipe) { + const unsigned short *table = tile_bundle_decoder_fsms[pipe]; int index = 0; while (1) @@ -2465,7 +2466,7 @@ parse_insn_tile(tile_bundle_bits bits, int i; d = &decoded[num_instructions++]; - opc = find_opcode (bits, tile_bundle_decoder_fsms[pipe]); + opc = find_opcode (bits, (tile_pipeline)pipe); d->opcode = opc; /* Decode each operand, sign extending, etc. as appropriate. */ diff --git a/arch/tile/kernel/tile-desc_64.c b/arch/tile/kernel/tile-desc_64.c new file mode 100644 index 000000000000..d57007bed77f --- /dev/null +++ b/arch/tile/kernel/tile-desc_64.c @@ -0,0 +1,2200 @@ +/* This define is BFD_RELOC_##x for real bfd, or -1 for everyone else. */ +#define BFD_RELOC(x) -1 + +/* Special registers. */ +#define TREG_LR 55 +#define TREG_SN 56 +#define TREG_ZERO 63 + +/* FIXME: Rename this. */ +#include <asm/opcode-tile_64.h> + +#include <linux/stddef.h> + +const struct tilegx_opcode tilegx_opcodes[334] = +{ + { "bpt", TILEGX_OPC_BPT, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "info", TILEGX_OPC_INFO, 0xf, 1, TREG_ZERO, 1, + { { 0 }, { 1 }, { 2 }, { 3 }, { 0, } }, + }, + { "infol", TILEGX_OPC_INFOL, 0x3, 1, TREG_ZERO, 1, + { { 4 }, { 5 }, { 0, }, { 0, }, { 0, } }, + }, + { "move", TILEGX_OPC_MOVE, 0xf, 2, TREG_ZERO, 1, + { { 6, 7 }, { 8, 9 }, { 10, 11 }, { 12, 13 }, { 0, } }, + }, + { "movei", TILEGX_OPC_MOVEI, 0xf, 2, TREG_ZERO, 1, + { { 6, 0 }, { 8, 1 }, { 10, 2 }, { 12, 3 }, { 0, } }, + }, + { "moveli", TILEGX_OPC_MOVELI, 0x3, 2, TREG_ZERO, 1, + { { 6, 4 }, { 8, 5 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch", TILEGX_OPC_PREFETCH, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "prefetch_add_l1", TILEGX_OPC_PREFETCH_ADD_L1, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch_add_l1_fault", TILEGX_OPC_PREFETCH_ADD_L1_FAULT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch_add_l2", TILEGX_OPC_PREFETCH_ADD_L2, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch_add_l2_fault", TILEGX_OPC_PREFETCH_ADD_L2_FAULT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch_add_l3", TILEGX_OPC_PREFETCH_ADD_L3, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch_add_l3_fault", TILEGX_OPC_PREFETCH_ADD_L3_FAULT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "prefetch_l1", TILEGX_OPC_PREFETCH_L1, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "prefetch_l1_fault", TILEGX_OPC_PREFETCH_L1_FAULT, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "prefetch_l2", TILEGX_OPC_PREFETCH_L2, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "prefetch_l2_fault", TILEGX_OPC_PREFETCH_L2_FAULT, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "prefetch_l3", TILEGX_OPC_PREFETCH_L3, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "prefetch_l3_fault", TILEGX_OPC_PREFETCH_L3_FAULT, 0x12, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 14 } }, + }, + { "raise", TILEGX_OPC_RAISE, 0x2, 0, TREG_ZERO, 1, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "add", TILEGX_OPC_ADD, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "addi", TILEGX_OPC_ADDI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, + }, + { "addli", TILEGX_OPC_ADDLI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 4 }, { 8, 9, 5 }, { 0, }, { 0, }, { 0, } }, + }, + { "addx", TILEGX_OPC_ADDX, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "addxi", TILEGX_OPC_ADDXI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, + }, + { "addxli", TILEGX_OPC_ADDXLI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 4 }, { 8, 9, 5 }, { 0, }, { 0, }, { 0, } }, + }, + { "addxsc", TILEGX_OPC_ADDXSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "and", TILEGX_OPC_AND, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "andi", TILEGX_OPC_ANDI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, + }, + { "beqz", TILEGX_OPC_BEQZ, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "beqzt", TILEGX_OPC_BEQZT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bfexts", TILEGX_OPC_BFEXTS, 0x1, 4, TREG_ZERO, 1, + { { 6, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "bfextu", TILEGX_OPC_BFEXTU, 0x1, 4, TREG_ZERO, 1, + { { 6, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "bfins", TILEGX_OPC_BFINS, 0x1, 4, TREG_ZERO, 1, + { { 23, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "bgez", TILEGX_OPC_BGEZ, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bgezt", TILEGX_OPC_BGEZT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bgtz", TILEGX_OPC_BGTZ, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bgtzt", TILEGX_OPC_BGTZT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "blbc", TILEGX_OPC_BLBC, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "blbct", TILEGX_OPC_BLBCT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "blbs", TILEGX_OPC_BLBS, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "blbst", TILEGX_OPC_BLBST, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "blez", TILEGX_OPC_BLEZ, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "blezt", TILEGX_OPC_BLEZT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bltz", TILEGX_OPC_BLTZ, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bltzt", TILEGX_OPC_BLTZT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bnez", TILEGX_OPC_BNEZ, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "bnezt", TILEGX_OPC_BNEZT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 20 }, { 0, }, { 0, }, { 0, } }, + }, + { "clz", TILEGX_OPC_CLZ, 0x5, 2, TREG_ZERO, 1, + { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, + }, + { "cmoveqz", TILEGX_OPC_CMOVEQZ, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "cmovnez", TILEGX_OPC_CMOVNEZ, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "cmpeq", TILEGX_OPC_CMPEQ, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "cmpeqi", TILEGX_OPC_CMPEQI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, + }, + { "cmpexch", TILEGX_OPC_CMPEXCH, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "cmpexch4", TILEGX_OPC_CMPEXCH4, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "cmples", TILEGX_OPC_CMPLES, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "cmpleu", TILEGX_OPC_CMPLEU, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "cmplts", TILEGX_OPC_CMPLTS, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "cmpltsi", TILEGX_OPC_CMPLTSI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 10, 11, 2 }, { 12, 13, 3 }, { 0, } }, + }, + { "cmpltu", TILEGX_OPC_CMPLTU, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "cmpltui", TILEGX_OPC_CMPLTUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "cmpne", TILEGX_OPC_CMPNE, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "cmul", TILEGX_OPC_CMUL, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "cmula", TILEGX_OPC_CMULA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "cmulaf", TILEGX_OPC_CMULAF, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "cmulf", TILEGX_OPC_CMULF, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "cmulfr", TILEGX_OPC_CMULFR, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "cmulh", TILEGX_OPC_CMULH, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "cmulhr", TILEGX_OPC_CMULHR, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "crc32_32", TILEGX_OPC_CRC32_32, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "crc32_8", TILEGX_OPC_CRC32_8, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "ctz", TILEGX_OPC_CTZ, 0x5, 2, TREG_ZERO, 1, + { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, + }, + { "dblalign", TILEGX_OPC_DBLALIGN, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "dblalign2", TILEGX_OPC_DBLALIGN2, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "dblalign4", TILEGX_OPC_DBLALIGN4, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "dblalign6", TILEGX_OPC_DBLALIGN6, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "drain", TILEGX_OPC_DRAIN, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "dtlbpr", TILEGX_OPC_DTLBPR, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "exch", TILEGX_OPC_EXCH, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "exch4", TILEGX_OPC_EXCH4, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_add_flags", TILEGX_OPC_FDOUBLE_ADD_FLAGS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_addsub", TILEGX_OPC_FDOUBLE_ADDSUB, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_mul_flags", TILEGX_OPC_FDOUBLE_MUL_FLAGS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_pack1", TILEGX_OPC_FDOUBLE_PACK1, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_pack2", TILEGX_OPC_FDOUBLE_PACK2, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_sub_flags", TILEGX_OPC_FDOUBLE_SUB_FLAGS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_unpack_max", TILEGX_OPC_FDOUBLE_UNPACK_MAX, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fdouble_unpack_min", TILEGX_OPC_FDOUBLE_UNPACK_MIN, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchadd", TILEGX_OPC_FETCHADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchadd4", TILEGX_OPC_FETCHADD4, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchaddgez", TILEGX_OPC_FETCHADDGEZ, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchaddgez4", TILEGX_OPC_FETCHADDGEZ4, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchand", TILEGX_OPC_FETCHAND, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchand4", TILEGX_OPC_FETCHAND4, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchor", TILEGX_OPC_FETCHOR, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "fetchor4", TILEGX_OPC_FETCHOR4, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "finv", TILEGX_OPC_FINV, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "flush", TILEGX_OPC_FLUSH, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "flushwb", TILEGX_OPC_FLUSHWB, 0x2, 0, TREG_ZERO, 1, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "fnop", TILEGX_OPC_FNOP, 0xf, 0, TREG_ZERO, 1, + { { }, { }, { }, { }, { 0, } }, + }, + { "fsingle_add1", TILEGX_OPC_FSINGLE_ADD1, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fsingle_addsub2", TILEGX_OPC_FSINGLE_ADDSUB2, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fsingle_mul1", TILEGX_OPC_FSINGLE_MUL1, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fsingle_mul2", TILEGX_OPC_FSINGLE_MUL2, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fsingle_pack1", TILEGX_OPC_FSINGLE_PACK1, 0x5, 2, TREG_ZERO, 1, + { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, + }, + { "fsingle_pack2", TILEGX_OPC_FSINGLE_PACK2, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "fsingle_sub1", TILEGX_OPC_FSINGLE_SUB1, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "icoh", TILEGX_OPC_ICOH, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ill", TILEGX_OPC_ILL, 0xa, 0, TREG_ZERO, 1, + { { 0, }, { }, { 0, }, { }, { 0, } }, + }, + { "inv", TILEGX_OPC_INV, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "iret", TILEGX_OPC_IRET, 0x2, 0, TREG_ZERO, 1, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "j", TILEGX_OPC_J, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 25 }, { 0, }, { 0, }, { 0, } }, + }, + { "jal", TILEGX_OPC_JAL, 0x2, 1, TREG_LR, 1, + { { 0, }, { 25 }, { 0, }, { 0, }, { 0, } }, + }, + { "jalr", TILEGX_OPC_JALR, 0xa, 1, TREG_LR, 1, + { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, + }, + { "jalrp", TILEGX_OPC_JALRP, 0xa, 1, TREG_LR, 1, + { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, + }, + { "jr", TILEGX_OPC_JR, 0xa, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, + }, + { "jrp", TILEGX_OPC_JRP, 0xa, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 13 }, { 0, } }, + }, + { "ld", TILEGX_OPC_LD, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld1s", TILEGX_OPC_LD1S, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld1s_add", TILEGX_OPC_LD1S_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ld1u", TILEGX_OPC_LD1U, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld1u_add", TILEGX_OPC_LD1U_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ld2s", TILEGX_OPC_LD2S, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld2s_add", TILEGX_OPC_LD2S_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ld2u", TILEGX_OPC_LD2U, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld2u_add", TILEGX_OPC_LD2U_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ld4s", TILEGX_OPC_LD4S, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld4s_add", TILEGX_OPC_LD4S_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ld4u", TILEGX_OPC_LD4U, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 26, 14 } }, + }, + { "ld4u_add", TILEGX_OPC_LD4U_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ld_add", TILEGX_OPC_LD_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldna", TILEGX_OPC_LDNA, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldna_add", TILEGX_OPC_LDNA_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt", TILEGX_OPC_LDNT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt1s", TILEGX_OPC_LDNT1S, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt1s_add", TILEGX_OPC_LDNT1S_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt1u", TILEGX_OPC_LDNT1U, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt1u_add", TILEGX_OPC_LDNT1U_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt2s", TILEGX_OPC_LDNT2S, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt2s_add", TILEGX_OPC_LDNT2S_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt2u", TILEGX_OPC_LDNT2U, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt2u_add", TILEGX_OPC_LDNT2U_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt4s", TILEGX_OPC_LDNT4S, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt4s_add", TILEGX_OPC_LDNT4S_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt4u", TILEGX_OPC_LDNT4U, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt4u_add", TILEGX_OPC_LDNT4U_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "ldnt_add", TILEGX_OPC_LDNT_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 8, 15, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "lnk", TILEGX_OPC_LNK, 0xa, 1, TREG_ZERO, 1, + { { 0, }, { 8 }, { 0, }, { 12 }, { 0, } }, + }, + { "mf", TILEGX_OPC_MF, 0x2, 0, TREG_ZERO, 1, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "mfspr", TILEGX_OPC_MFSPR, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 8, 27 }, { 0, }, { 0, }, { 0, } }, + }, + { "mm", TILEGX_OPC_MM, 0x1, 4, TREG_ZERO, 1, + { { 23, 7, 21, 22 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mnz", TILEGX_OPC_MNZ, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "mtspr", TILEGX_OPC_MTSPR, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 28, 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_hs_hs", TILEGX_OPC_MUL_HS_HS, 0x5, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, + }, + { "mul_hs_hu", TILEGX_OPC_MUL_HS_HU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_hs_ls", TILEGX_OPC_MUL_HS_LS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_hs_lu", TILEGX_OPC_MUL_HS_LU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_hu_hu", TILEGX_OPC_MUL_HU_HU, 0x5, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, + }, + { "mul_hu_ls", TILEGX_OPC_MUL_HU_LS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_hu_lu", TILEGX_OPC_MUL_HU_LU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_ls_ls", TILEGX_OPC_MUL_LS_LS, 0x5, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, + }, + { "mul_ls_lu", TILEGX_OPC_MUL_LS_LU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mul_lu_lu", TILEGX_OPC_MUL_LU_LU, 0x5, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, + }, + { "mula_hs_hs", TILEGX_OPC_MULA_HS_HS, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "mula_hs_hu", TILEGX_OPC_MULA_HS_HU, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mula_hs_ls", TILEGX_OPC_MULA_HS_LS, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mula_hs_lu", TILEGX_OPC_MULA_HS_LU, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mula_hu_hu", TILEGX_OPC_MULA_HU_HU, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "mula_hu_ls", TILEGX_OPC_MULA_HU_LS, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mula_hu_lu", TILEGX_OPC_MULA_HU_LU, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mula_ls_ls", TILEGX_OPC_MULA_LS_LS, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "mula_ls_lu", TILEGX_OPC_MULA_LS_LU, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "mula_lu_lu", TILEGX_OPC_MULA_LU_LU, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "mulax", TILEGX_OPC_MULAX, 0x5, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 24, 11, 18 }, { 0, }, { 0, } }, + }, + { "mulx", TILEGX_OPC_MULX, 0x5, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 10, 11, 18 }, { 0, }, { 0, } }, + }, + { "mz", TILEGX_OPC_MZ, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "nap", TILEGX_OPC_NAP, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "nop", TILEGX_OPC_NOP, 0xf, 0, TREG_ZERO, 1, + { { }, { }, { }, { }, { 0, } }, + }, + { "nor", TILEGX_OPC_NOR, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "or", TILEGX_OPC_OR, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "ori", TILEGX_OPC_ORI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "pcnt", TILEGX_OPC_PCNT, 0x5, 2, TREG_ZERO, 1, + { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, + }, + { "revbits", TILEGX_OPC_REVBITS, 0x5, 2, TREG_ZERO, 1, + { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, + }, + { "revbytes", TILEGX_OPC_REVBYTES, 0x5, 2, TREG_ZERO, 1, + { { 6, 7 }, { 0, }, { 10, 11 }, { 0, }, { 0, } }, + }, + { "rotl", TILEGX_OPC_ROTL, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "rotli", TILEGX_OPC_ROTLI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, + }, + { "shl", TILEGX_OPC_SHL, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shl16insli", TILEGX_OPC_SHL16INSLI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 4 }, { 8, 9, 5 }, { 0, }, { 0, }, { 0, } }, + }, + { "shl1add", TILEGX_OPC_SHL1ADD, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shl1addx", TILEGX_OPC_SHL1ADDX, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shl2add", TILEGX_OPC_SHL2ADD, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shl2addx", TILEGX_OPC_SHL2ADDX, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shl3add", TILEGX_OPC_SHL3ADD, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shl3addx", TILEGX_OPC_SHL3ADDX, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shli", TILEGX_OPC_SHLI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, + }, + { "shlx", TILEGX_OPC_SHLX, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "shlxi", TILEGX_OPC_SHLXI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "shrs", TILEGX_OPC_SHRS, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shrsi", TILEGX_OPC_SHRSI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, + }, + { "shru", TILEGX_OPC_SHRU, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "shrui", TILEGX_OPC_SHRUI, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 10, 11, 31 }, { 12, 13, 32 }, { 0, } }, + }, + { "shrux", TILEGX_OPC_SHRUX, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "shruxi", TILEGX_OPC_SHRUXI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "shufflebytes", TILEGX_OPC_SHUFFLEBYTES, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "st", TILEGX_OPC_ST, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, + }, + { "st1", TILEGX_OPC_ST1, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, + }, + { "st1_add", TILEGX_OPC_ST1_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "st2", TILEGX_OPC_ST2, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, + }, + { "st2_add", TILEGX_OPC_ST2_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "st4", TILEGX_OPC_ST4, 0x12, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 14, 33 } }, + }, + { "st4_add", TILEGX_OPC_ST4_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "st_add", TILEGX_OPC_ST_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt", TILEGX_OPC_STNT, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt1", TILEGX_OPC_STNT1, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt1_add", TILEGX_OPC_STNT1_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt2", TILEGX_OPC_STNT2, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt2_add", TILEGX_OPC_STNT2_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt4", TILEGX_OPC_STNT4, 0x2, 2, TREG_ZERO, 1, + { { 0, }, { 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt4_add", TILEGX_OPC_STNT4_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "stnt_add", TILEGX_OPC_STNT_ADD, 0x2, 3, TREG_ZERO, 1, + { { 0, }, { 15, 17, 34 }, { 0, }, { 0, }, { 0, } }, + }, + { "sub", TILEGX_OPC_SUB, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "subx", TILEGX_OPC_SUBX, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "subxsc", TILEGX_OPC_SUBXSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "swint0", TILEGX_OPC_SWINT0, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "swint1", TILEGX_OPC_SWINT1, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "swint2", TILEGX_OPC_SWINT2, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "swint3", TILEGX_OPC_SWINT3, 0x2, 0, TREG_ZERO, 0, + { { 0, }, { }, { 0, }, { 0, }, { 0, } }, + }, + { "tblidxb0", TILEGX_OPC_TBLIDXB0, 0x5, 2, TREG_ZERO, 1, + { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, + }, + { "tblidxb1", TILEGX_OPC_TBLIDXB1, 0x5, 2, TREG_ZERO, 1, + { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, + }, + { "tblidxb2", TILEGX_OPC_TBLIDXB2, 0x5, 2, TREG_ZERO, 1, + { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, + }, + { "tblidxb3", TILEGX_OPC_TBLIDXB3, 0x5, 2, TREG_ZERO, 1, + { { 23, 7 }, { 0, }, { 24, 11 }, { 0, }, { 0, } }, + }, + { "v1add", TILEGX_OPC_V1ADD, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1addi", TILEGX_OPC_V1ADDI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1adduc", TILEGX_OPC_V1ADDUC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1adiffu", TILEGX_OPC_V1ADIFFU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1avgu", TILEGX_OPC_V1AVGU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpeq", TILEGX_OPC_V1CMPEQ, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpeqi", TILEGX_OPC_V1CMPEQI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmples", TILEGX_OPC_V1CMPLES, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpleu", TILEGX_OPC_V1CMPLEU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmplts", TILEGX_OPC_V1CMPLTS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpltsi", TILEGX_OPC_V1CMPLTSI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpltu", TILEGX_OPC_V1CMPLTU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpltui", TILEGX_OPC_V1CMPLTUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1cmpne", TILEGX_OPC_V1CMPNE, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1ddotpu", TILEGX_OPC_V1DDOTPU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1ddotpua", TILEGX_OPC_V1DDOTPUA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1ddotpus", TILEGX_OPC_V1DDOTPUS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1ddotpusa", TILEGX_OPC_V1DDOTPUSA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1dotp", TILEGX_OPC_V1DOTP, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1dotpa", TILEGX_OPC_V1DOTPA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1dotpu", TILEGX_OPC_V1DOTPU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1dotpua", TILEGX_OPC_V1DOTPUA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1dotpus", TILEGX_OPC_V1DOTPUS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1dotpusa", TILEGX_OPC_V1DOTPUSA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1int_h", TILEGX_OPC_V1INT_H, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1int_l", TILEGX_OPC_V1INT_L, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1maxu", TILEGX_OPC_V1MAXU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1maxui", TILEGX_OPC_V1MAXUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1minu", TILEGX_OPC_V1MINU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1minui", TILEGX_OPC_V1MINUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1mnz", TILEGX_OPC_V1MNZ, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1multu", TILEGX_OPC_V1MULTU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1mulu", TILEGX_OPC_V1MULU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1mulus", TILEGX_OPC_V1MULUS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1mz", TILEGX_OPC_V1MZ, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1sadau", TILEGX_OPC_V1SADAU, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1sadu", TILEGX_OPC_V1SADU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v1shl", TILEGX_OPC_V1SHL, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1shli", TILEGX_OPC_V1SHLI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1shrs", TILEGX_OPC_V1SHRS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1shrsi", TILEGX_OPC_V1SHRSI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1shru", TILEGX_OPC_V1SHRU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1shrui", TILEGX_OPC_V1SHRUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1sub", TILEGX_OPC_V1SUB, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v1subuc", TILEGX_OPC_V1SUBUC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2add", TILEGX_OPC_V2ADD, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2addi", TILEGX_OPC_V2ADDI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2addsc", TILEGX_OPC_V2ADDSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2adiffs", TILEGX_OPC_V2ADIFFS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2avgs", TILEGX_OPC_V2AVGS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpeq", TILEGX_OPC_V2CMPEQ, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpeqi", TILEGX_OPC_V2CMPEQI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmples", TILEGX_OPC_V2CMPLES, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpleu", TILEGX_OPC_V2CMPLEU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmplts", TILEGX_OPC_V2CMPLTS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpltsi", TILEGX_OPC_V2CMPLTSI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpltu", TILEGX_OPC_V2CMPLTU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpltui", TILEGX_OPC_V2CMPLTUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2cmpne", TILEGX_OPC_V2CMPNE, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2dotp", TILEGX_OPC_V2DOTP, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2dotpa", TILEGX_OPC_V2DOTPA, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2int_h", TILEGX_OPC_V2INT_H, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2int_l", TILEGX_OPC_V2INT_L, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2maxs", TILEGX_OPC_V2MAXS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2maxsi", TILEGX_OPC_V2MAXSI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2mins", TILEGX_OPC_V2MINS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2minsi", TILEGX_OPC_V2MINSI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2mnz", TILEGX_OPC_V2MNZ, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2mulfsc", TILEGX_OPC_V2MULFSC, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2muls", TILEGX_OPC_V2MULS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2mults", TILEGX_OPC_V2MULTS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2mz", TILEGX_OPC_V2MZ, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2packh", TILEGX_OPC_V2PACKH, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2packl", TILEGX_OPC_V2PACKL, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2packuc", TILEGX_OPC_V2PACKUC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2sadas", TILEGX_OPC_V2SADAS, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2sadau", TILEGX_OPC_V2SADAU, 0x1, 3, TREG_ZERO, 1, + { { 23, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2sads", TILEGX_OPC_V2SADS, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2sadu", TILEGX_OPC_V2SADU, 0x1, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 0, }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shl", TILEGX_OPC_V2SHL, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shli", TILEGX_OPC_V2SHLI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shlsc", TILEGX_OPC_V2SHLSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shrs", TILEGX_OPC_V2SHRS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shrsi", TILEGX_OPC_V2SHRSI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shru", TILEGX_OPC_V2SHRU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2shrui", TILEGX_OPC_V2SHRUI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 29 }, { 8, 9, 30 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2sub", TILEGX_OPC_V2SUB, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v2subsc", TILEGX_OPC_V2SUBSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4add", TILEGX_OPC_V4ADD, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4addsc", TILEGX_OPC_V4ADDSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4int_h", TILEGX_OPC_V4INT_H, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4int_l", TILEGX_OPC_V4INT_L, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4packsc", TILEGX_OPC_V4PACKSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4shl", TILEGX_OPC_V4SHL, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4shlsc", TILEGX_OPC_V4SHLSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4shrs", TILEGX_OPC_V4SHRS, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4shru", TILEGX_OPC_V4SHRU, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4sub", TILEGX_OPC_V4SUB, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "v4subsc", TILEGX_OPC_V4SUBSC, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 0, }, { 0, }, { 0, } }, + }, + { "wh64", TILEGX_OPC_WH64, 0x2, 1, TREG_ZERO, 1, + { { 0, }, { 9 }, { 0, }, { 0, }, { 0, } }, + }, + { "xor", TILEGX_OPC_XOR, 0xf, 3, TREG_ZERO, 1, + { { 6, 7, 16 }, { 8, 9, 17 }, { 10, 11, 18 }, { 12, 13, 19 }, { 0, } }, + }, + { "xori", TILEGX_OPC_XORI, 0x3, 3, TREG_ZERO, 1, + { { 6, 7, 0 }, { 8, 9, 1 }, { 0, }, { 0, }, { 0, } }, + }, + { NULL, TILEGX_OPC_NONE, 0, 0, TREG_ZERO, 0, { { 0, } }, + } +}; +#define BITFIELD(start, size) ((start) | (((1 << (size)) - 1) << 6)) +#define CHILD(array_index) (TILEGX_OPC_NONE + (array_index)) + +static const unsigned short decode_X0_fsm[936] = +{ + BITFIELD(22, 9) /* index 0 */, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_BFEXTS, + TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTS, TILEGX_OPC_BFEXTU, + TILEGX_OPC_BFEXTU, TILEGX_OPC_BFEXTU, TILEGX_OPC_BFEXTU, TILEGX_OPC_BFINS, + TILEGX_OPC_BFINS, TILEGX_OPC_BFINS, TILEGX_OPC_BFINS, TILEGX_OPC_MM, + TILEGX_OPC_MM, TILEGX_OPC_MM, TILEGX_OPC_MM, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(528), CHILD(578), + CHILD(583), CHILD(588), CHILD(593), CHILD(598), TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, CHILD(603), CHILD(620), CHILD(637), CHILD(654), CHILD(671), + CHILD(703), CHILD(797), CHILD(814), CHILD(831), CHILD(848), CHILD(865), + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, CHILD(889), TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + CHILD(906), CHILD(906), CHILD(906), CHILD(906), CHILD(906), + BITFIELD(6, 2) /* index 513 */, + TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(518), + BITFIELD(8, 2) /* index 518 */, + TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(523), + BITFIELD(10, 2) /* index 523 */, + TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_MOVELI, + BITFIELD(20, 2) /* index 528 */, + TILEGX_OPC_NONE, CHILD(533), TILEGX_OPC_ADDXI, CHILD(548), + BITFIELD(6, 2) /* index 533 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(538), + BITFIELD(8, 2) /* index 538 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(543), + BITFIELD(10, 2) /* index 543 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, + BITFIELD(0, 2) /* index 548 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(553), + BITFIELD(2, 2) /* index 553 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(558), + BITFIELD(4, 2) /* index 558 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(563), + BITFIELD(6, 2) /* index 563 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(568), + BITFIELD(8, 2) /* index 568 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(573), + BITFIELD(10, 2) /* index 573 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, + BITFIELD(20, 2) /* index 578 */, + TILEGX_OPC_CMPEQI, TILEGX_OPC_CMPLTSI, TILEGX_OPC_CMPLTUI, TILEGX_OPC_ORI, + BITFIELD(20, 2) /* index 583 */, + TILEGX_OPC_V1ADDI, TILEGX_OPC_V1CMPEQI, TILEGX_OPC_V1CMPLTSI, + TILEGX_OPC_V1CMPLTUI, + BITFIELD(20, 2) /* index 588 */, + TILEGX_OPC_V1MAXUI, TILEGX_OPC_V1MINUI, TILEGX_OPC_V2ADDI, + TILEGX_OPC_V2CMPEQI, + BITFIELD(20, 2) /* index 593 */, + TILEGX_OPC_V2CMPLTSI, TILEGX_OPC_V2CMPLTUI, TILEGX_OPC_V2MAXSI, + TILEGX_OPC_V2MINSI, + BITFIELD(20, 2) /* index 598 */, + TILEGX_OPC_XORI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(18, 4) /* index 603 */, + TILEGX_OPC_NONE, TILEGX_OPC_ADDXSC, TILEGX_OPC_ADDX, TILEGX_OPC_ADD, + TILEGX_OPC_AND, TILEGX_OPC_CMOVEQZ, TILEGX_OPC_CMOVNEZ, TILEGX_OPC_CMPEQ, + TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, + TILEGX_OPC_CMPNE, TILEGX_OPC_CMULAF, TILEGX_OPC_CMULA, TILEGX_OPC_CMULFR, + BITFIELD(18, 4) /* index 620 */, + TILEGX_OPC_CMULF, TILEGX_OPC_CMULHR, TILEGX_OPC_CMULH, TILEGX_OPC_CMUL, + TILEGX_OPC_CRC32_32, TILEGX_OPC_CRC32_8, TILEGX_OPC_DBLALIGN2, + TILEGX_OPC_DBLALIGN4, TILEGX_OPC_DBLALIGN6, TILEGX_OPC_DBLALIGN, + TILEGX_OPC_FDOUBLE_ADDSUB, TILEGX_OPC_FDOUBLE_ADD_FLAGS, + TILEGX_OPC_FDOUBLE_MUL_FLAGS, TILEGX_OPC_FDOUBLE_PACK1, + TILEGX_OPC_FDOUBLE_PACK2, TILEGX_OPC_FDOUBLE_SUB_FLAGS, + BITFIELD(18, 4) /* index 637 */, + TILEGX_OPC_FDOUBLE_UNPACK_MAX, TILEGX_OPC_FDOUBLE_UNPACK_MIN, + TILEGX_OPC_FSINGLE_ADD1, TILEGX_OPC_FSINGLE_ADDSUB2, + TILEGX_OPC_FSINGLE_MUL1, TILEGX_OPC_FSINGLE_MUL2, TILEGX_OPC_FSINGLE_PACK2, + TILEGX_OPC_FSINGLE_SUB1, TILEGX_OPC_MNZ, TILEGX_OPC_MULAX, + TILEGX_OPC_MULA_HS_HS, TILEGX_OPC_MULA_HS_HU, TILEGX_OPC_MULA_HS_LS, + TILEGX_OPC_MULA_HS_LU, TILEGX_OPC_MULA_HU_HU, TILEGX_OPC_MULA_HU_LS, + BITFIELD(18, 4) /* index 654 */, + TILEGX_OPC_MULA_HU_LU, TILEGX_OPC_MULA_LS_LS, TILEGX_OPC_MULA_LS_LU, + TILEGX_OPC_MULA_LU_LU, TILEGX_OPC_MULX, TILEGX_OPC_MUL_HS_HS, + TILEGX_OPC_MUL_HS_HU, TILEGX_OPC_MUL_HS_LS, TILEGX_OPC_MUL_HS_LU, + TILEGX_OPC_MUL_HU_HU, TILEGX_OPC_MUL_HU_LS, TILEGX_OPC_MUL_HU_LU, + TILEGX_OPC_MUL_LS_LS, TILEGX_OPC_MUL_LS_LU, TILEGX_OPC_MUL_LU_LU, + TILEGX_OPC_MZ, + BITFIELD(18, 4) /* index 671 */, + TILEGX_OPC_NOR, CHILD(688), TILEGX_OPC_ROTL, TILEGX_OPC_SHL1ADDX, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADDX, TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL3ADDX, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHLX, TILEGX_OPC_SHL, + TILEGX_OPC_SHRS, TILEGX_OPC_SHRUX, TILEGX_OPC_SHRU, TILEGX_OPC_SHUFFLEBYTES, + TILEGX_OPC_SUBXSC, + BITFIELD(12, 2) /* index 688 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(693), + BITFIELD(14, 2) /* index 693 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(698), + BITFIELD(16, 2) /* index 698 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, + BITFIELD(18, 4) /* index 703 */, + TILEGX_OPC_SUBX, TILEGX_OPC_SUB, CHILD(720), TILEGX_OPC_V1ADDUC, + TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADIFFU, TILEGX_OPC_V1AVGU, + TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLEU, + TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPNE, + TILEGX_OPC_V1DDOTPUSA, TILEGX_OPC_V1DDOTPUS, TILEGX_OPC_V1DOTPA, + BITFIELD(12, 4) /* index 720 */, + TILEGX_OPC_NONE, CHILD(737), CHILD(742), CHILD(747), CHILD(752), CHILD(757), + CHILD(762), CHILD(767), CHILD(772), CHILD(777), CHILD(782), CHILD(787), + CHILD(792), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 737 */, + TILEGX_OPC_CLZ, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 742 */, + TILEGX_OPC_CTZ, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 747 */, + TILEGX_OPC_FNOP, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 752 */, + TILEGX_OPC_FSINGLE_PACK1, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 757 */, + TILEGX_OPC_NOP, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 762 */, + TILEGX_OPC_PCNT, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 767 */, + TILEGX_OPC_REVBITS, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 772 */, + TILEGX_OPC_REVBYTES, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 777 */, + TILEGX_OPC_TBLIDXB0, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 782 */, + TILEGX_OPC_TBLIDXB1, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 787 */, + TILEGX_OPC_TBLIDXB2, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(16, 2) /* index 792 */, + TILEGX_OPC_TBLIDXB3, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(18, 4) /* index 797 */, + TILEGX_OPC_V1DOTPUSA, TILEGX_OPC_V1DOTPUS, TILEGX_OPC_V1DOTP, + TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1MAXU, + TILEGX_OPC_V1MINU, TILEGX_OPC_V1MNZ, TILEGX_OPC_V1MULTU, TILEGX_OPC_V1MULUS, + TILEGX_OPC_V1MULU, TILEGX_OPC_V1MZ, TILEGX_OPC_V1SADAU, TILEGX_OPC_V1SADU, + TILEGX_OPC_V1SHL, TILEGX_OPC_V1SHRS, + BITFIELD(18, 4) /* index 814 */, + TILEGX_OPC_V1SHRU, TILEGX_OPC_V1SUBUC, TILEGX_OPC_V1SUB, TILEGX_OPC_V2ADDSC, + TILEGX_OPC_V2ADD, TILEGX_OPC_V2ADIFFS, TILEGX_OPC_V2AVGS, + TILEGX_OPC_V2CMPEQ, TILEGX_OPC_V2CMPLES, TILEGX_OPC_V2CMPLEU, + TILEGX_OPC_V2CMPLTS, TILEGX_OPC_V2CMPLTU, TILEGX_OPC_V2CMPNE, + TILEGX_OPC_V2DOTPA, TILEGX_OPC_V2DOTP, TILEGX_OPC_V2INT_H, + BITFIELD(18, 4) /* index 831 */, + TILEGX_OPC_V2INT_L, TILEGX_OPC_V2MAXS, TILEGX_OPC_V2MINS, TILEGX_OPC_V2MNZ, + TILEGX_OPC_V2MULFSC, TILEGX_OPC_V2MULS, TILEGX_OPC_V2MULTS, TILEGX_OPC_V2MZ, + TILEGX_OPC_V2PACKH, TILEGX_OPC_V2PACKL, TILEGX_OPC_V2PACKUC, + TILEGX_OPC_V2SADAS, TILEGX_OPC_V2SADAU, TILEGX_OPC_V2SADS, + TILEGX_OPC_V2SADU, TILEGX_OPC_V2SHLSC, + BITFIELD(18, 4) /* index 848 */, + TILEGX_OPC_V2SHL, TILEGX_OPC_V2SHRS, TILEGX_OPC_V2SHRU, TILEGX_OPC_V2SUBSC, + TILEGX_OPC_V2SUB, TILEGX_OPC_V4ADDSC, TILEGX_OPC_V4ADD, TILEGX_OPC_V4INT_H, + TILEGX_OPC_V4INT_L, TILEGX_OPC_V4PACKSC, TILEGX_OPC_V4SHLSC, + TILEGX_OPC_V4SHL, TILEGX_OPC_V4SHRS, TILEGX_OPC_V4SHRU, TILEGX_OPC_V4SUBSC, + TILEGX_OPC_V4SUB, + BITFIELD(18, 3) /* index 865 */, + CHILD(874), CHILD(877), CHILD(880), CHILD(883), CHILD(886), TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(21, 1) /* index 874 */, + TILEGX_OPC_XOR, TILEGX_OPC_NONE, + BITFIELD(21, 1) /* index 877 */, + TILEGX_OPC_V1DDOTPUA, TILEGX_OPC_NONE, + BITFIELD(21, 1) /* index 880 */, + TILEGX_OPC_V1DDOTPU, TILEGX_OPC_NONE, + BITFIELD(21, 1) /* index 883 */, + TILEGX_OPC_V1DOTPUA, TILEGX_OPC_NONE, + BITFIELD(21, 1) /* index 886 */, + TILEGX_OPC_V1DOTPU, TILEGX_OPC_NONE, + BITFIELD(18, 4) /* index 889 */, + TILEGX_OPC_NONE, TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHLXI, + TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, TILEGX_OPC_SHRUXI, TILEGX_OPC_V1SHLI, + TILEGX_OPC_V1SHRSI, TILEGX_OPC_V1SHRUI, TILEGX_OPC_V2SHLI, + TILEGX_OPC_V2SHRSI, TILEGX_OPC_V2SHRUI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, + BITFIELD(0, 2) /* index 906 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(911), + BITFIELD(2, 2) /* index 911 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(916), + BITFIELD(4, 2) /* index 916 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(921), + BITFIELD(6, 2) /* index 921 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(926), + BITFIELD(8, 2) /* index 926 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(931), + BITFIELD(10, 2) /* index 931 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + TILEGX_OPC_INFOL, +}; + +static const unsigned short decode_X1_fsm[1206] = +{ + BITFIELD(53, 9) /* index 0 */, + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), CHILD(513), + CHILD(513), CHILD(513), CHILD(513), CHILD(513), TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, + TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_ADDXLI, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_BEQZT, + TILEGX_OPC_BEQZT, TILEGX_OPC_BEQZ, TILEGX_OPC_BEQZ, TILEGX_OPC_BGEZT, + TILEGX_OPC_BGEZT, TILEGX_OPC_BGEZ, TILEGX_OPC_BGEZ, TILEGX_OPC_BGTZT, + TILEGX_OPC_BGTZT, TILEGX_OPC_BGTZ, TILEGX_OPC_BGTZ, TILEGX_OPC_BLBCT, + TILEGX_OPC_BLBCT, TILEGX_OPC_BLBC, TILEGX_OPC_BLBC, TILEGX_OPC_BLBST, + TILEGX_OPC_BLBST, TILEGX_OPC_BLBS, TILEGX_OPC_BLBS, TILEGX_OPC_BLEZT, + TILEGX_OPC_BLEZT, TILEGX_OPC_BLEZ, TILEGX_OPC_BLEZ, TILEGX_OPC_BLTZT, + TILEGX_OPC_BLTZT, TILEGX_OPC_BLTZ, TILEGX_OPC_BLTZ, TILEGX_OPC_BNEZT, + TILEGX_OPC_BNEZT, TILEGX_OPC_BNEZ, TILEGX_OPC_BNEZ, CHILD(528), CHILD(578), + CHILD(598), CHILD(663), CHILD(683), CHILD(688), CHILD(693), CHILD(698), + CHILD(703), CHILD(708), CHILD(713), CHILD(718), TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, + TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_JAL, TILEGX_OPC_J, TILEGX_OPC_J, + TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, + TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, + TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, + TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, + TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, + TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, TILEGX_OPC_J, + CHILD(723), CHILD(740), CHILD(772), CHILD(789), CHILD(1108), CHILD(1125), + CHILD(1142), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(1159), TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), CHILD(1176), + CHILD(1176), + BITFIELD(37, 2) /* index 513 */, + TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(518), + BITFIELD(39, 2) /* index 518 */, + TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, CHILD(523), + BITFIELD(41, 2) /* index 523 */, + TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_ADDLI, TILEGX_OPC_MOVELI, + BITFIELD(51, 2) /* index 528 */, + TILEGX_OPC_NONE, CHILD(533), TILEGX_OPC_ADDXI, CHILD(548), + BITFIELD(37, 2) /* index 533 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(538), + BITFIELD(39, 2) /* index 538 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(543), + BITFIELD(41, 2) /* index 543 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, + BITFIELD(31, 2) /* index 548 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(553), + BITFIELD(33, 2) /* index 553 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(558), + BITFIELD(35, 2) /* index 558 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(563), + BITFIELD(37, 2) /* index 563 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(568), + BITFIELD(39, 2) /* index 568 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(573), + BITFIELD(41, 2) /* index 573 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, + BITFIELD(51, 2) /* index 578 */, + TILEGX_OPC_CMPEQI, TILEGX_OPC_CMPLTSI, TILEGX_OPC_CMPLTUI, CHILD(583), + BITFIELD(31, 2) /* index 583 */, + TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, CHILD(588), + BITFIELD(33, 2) /* index 588 */, + TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, CHILD(593), + BITFIELD(35, 2) /* index 593 */, + TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, TILEGX_OPC_LD1S_ADD, + TILEGX_OPC_PREFETCH_ADD_L1_FAULT, + BITFIELD(51, 2) /* index 598 */, + CHILD(603), CHILD(618), CHILD(633), CHILD(648), + BITFIELD(31, 2) /* index 603 */, + TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, CHILD(608), + BITFIELD(33, 2) /* index 608 */, + TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, CHILD(613), + BITFIELD(35, 2) /* index 613 */, + TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, TILEGX_OPC_LD1U_ADD, + TILEGX_OPC_PREFETCH_ADD_L1, + BITFIELD(31, 2) /* index 618 */, + TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, CHILD(623), + BITFIELD(33, 2) /* index 623 */, + TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, CHILD(628), + BITFIELD(35, 2) /* index 628 */, + TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, TILEGX_OPC_LD2S_ADD, + TILEGX_OPC_PREFETCH_ADD_L2_FAULT, + BITFIELD(31, 2) /* index 633 */, + TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, CHILD(638), + BITFIELD(33, 2) /* index 638 */, + TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, CHILD(643), + BITFIELD(35, 2) /* index 643 */, + TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, TILEGX_OPC_LD2U_ADD, + TILEGX_OPC_PREFETCH_ADD_L2, + BITFIELD(31, 2) /* index 648 */, + TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, CHILD(653), + BITFIELD(33, 2) /* index 653 */, + TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, CHILD(658), + BITFIELD(35, 2) /* index 658 */, + TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, TILEGX_OPC_LD4S_ADD, + TILEGX_OPC_PREFETCH_ADD_L3_FAULT, + BITFIELD(51, 2) /* index 663 */, + CHILD(668), TILEGX_OPC_LDNT1S_ADD, TILEGX_OPC_LDNT1U_ADD, + TILEGX_OPC_LDNT2S_ADD, + BITFIELD(31, 2) /* index 668 */, + TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, CHILD(673), + BITFIELD(33, 2) /* index 673 */, + TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, CHILD(678), + BITFIELD(35, 2) /* index 678 */, + TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, TILEGX_OPC_LD4U_ADD, + TILEGX_OPC_PREFETCH_ADD_L3, + BITFIELD(51, 2) /* index 683 */, + TILEGX_OPC_LDNT2U_ADD, TILEGX_OPC_LDNT4S_ADD, TILEGX_OPC_LDNT4U_ADD, + TILEGX_OPC_LDNT_ADD, + BITFIELD(51, 2) /* index 688 */, + TILEGX_OPC_LD_ADD, TILEGX_OPC_LDNA_ADD, TILEGX_OPC_MFSPR, TILEGX_OPC_MTSPR, + BITFIELD(51, 2) /* index 693 */, + TILEGX_OPC_ORI, TILEGX_OPC_ST1_ADD, TILEGX_OPC_ST2_ADD, TILEGX_OPC_ST4_ADD, + BITFIELD(51, 2) /* index 698 */, + TILEGX_OPC_STNT1_ADD, TILEGX_OPC_STNT2_ADD, TILEGX_OPC_STNT4_ADD, + TILEGX_OPC_STNT_ADD, + BITFIELD(51, 2) /* index 703 */, + TILEGX_OPC_ST_ADD, TILEGX_OPC_V1ADDI, TILEGX_OPC_V1CMPEQI, + TILEGX_OPC_V1CMPLTSI, + BITFIELD(51, 2) /* index 708 */, + TILEGX_OPC_V1CMPLTUI, TILEGX_OPC_V1MAXUI, TILEGX_OPC_V1MINUI, + TILEGX_OPC_V2ADDI, + BITFIELD(51, 2) /* index 713 */, + TILEGX_OPC_V2CMPEQI, TILEGX_OPC_V2CMPLTSI, TILEGX_OPC_V2CMPLTUI, + TILEGX_OPC_V2MAXSI, + BITFIELD(51, 2) /* index 718 */, + TILEGX_OPC_V2MINSI, TILEGX_OPC_XORI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(49, 4) /* index 723 */, + TILEGX_OPC_NONE, TILEGX_OPC_ADDXSC, TILEGX_OPC_ADDX, TILEGX_OPC_ADD, + TILEGX_OPC_AND, TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPEXCH4, TILEGX_OPC_CMPEXCH, + TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, + TILEGX_OPC_CMPNE, TILEGX_OPC_DBLALIGN2, TILEGX_OPC_DBLALIGN4, + TILEGX_OPC_DBLALIGN6, + BITFIELD(49, 4) /* index 740 */, + TILEGX_OPC_EXCH4, TILEGX_OPC_EXCH, TILEGX_OPC_FETCHADD4, + TILEGX_OPC_FETCHADDGEZ4, TILEGX_OPC_FETCHADDGEZ, TILEGX_OPC_FETCHADD, + TILEGX_OPC_FETCHAND4, TILEGX_OPC_FETCHAND, TILEGX_OPC_FETCHOR4, + TILEGX_OPC_FETCHOR, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, TILEGX_OPC_NOR, + CHILD(757), TILEGX_OPC_ROTL, TILEGX_OPC_SHL1ADDX, + BITFIELD(43, 2) /* index 757 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(762), + BITFIELD(45, 2) /* index 762 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(767), + BITFIELD(47, 2) /* index 767 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, + BITFIELD(49, 4) /* index 772 */, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADDX, TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL3ADDX, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHLX, TILEGX_OPC_SHL, + TILEGX_OPC_SHRS, TILEGX_OPC_SHRUX, TILEGX_OPC_SHRU, TILEGX_OPC_ST1, + TILEGX_OPC_ST2, TILEGX_OPC_ST4, TILEGX_OPC_STNT1, TILEGX_OPC_STNT2, + TILEGX_OPC_STNT4, + BITFIELD(46, 7) /* index 789 */, + TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, + TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, TILEGX_OPC_STNT, + TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, + TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_ST, TILEGX_OPC_SUBXSC, + TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, + TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBXSC, TILEGX_OPC_SUBX, + TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, + TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUBX, TILEGX_OPC_SUB, + TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, + TILEGX_OPC_SUB, TILEGX_OPC_SUB, TILEGX_OPC_SUB, CHILD(918), CHILD(927), + CHILD(1006), CHILD(1090), CHILD(1099), TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, + TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, + TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADDUC, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, + TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, + TILEGX_OPC_V1ADD, TILEGX_OPC_V1ADD, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, + TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, + TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, TILEGX_OPC_V1CMPEQ, + TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, + TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, + TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLES, TILEGX_OPC_V1CMPLEU, + TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, + TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLEU, + TILEGX_OPC_V1CMPLEU, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, + TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, + TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, TILEGX_OPC_V1CMPLTS, + TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, + TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, + TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPLTU, TILEGX_OPC_V1CMPNE, + TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, + TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1CMPNE, + TILEGX_OPC_V1CMPNE, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, + TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, + TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, TILEGX_OPC_V1INT_H, + TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, + TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, + TILEGX_OPC_V1INT_L, TILEGX_OPC_V1INT_L, + BITFIELD(43, 3) /* index 918 */, + TILEGX_OPC_NONE, TILEGX_OPC_DRAIN, TILEGX_OPC_DTLBPR, TILEGX_OPC_FINV, + TILEGX_OPC_FLUSHWB, TILEGX_OPC_FLUSH, TILEGX_OPC_FNOP, TILEGX_OPC_ICOH, + BITFIELD(43, 3) /* index 927 */, + CHILD(936), TILEGX_OPC_INV, TILEGX_OPC_IRET, TILEGX_OPC_JALRP, + TILEGX_OPC_JALR, TILEGX_OPC_JRP, TILEGX_OPC_JR, CHILD(991), + BITFIELD(31, 2) /* index 936 */, + CHILD(941), CHILD(966), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(33, 2) /* index 941 */, + TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_ILL, CHILD(946), + BITFIELD(35, 2) /* index 946 */, + TILEGX_OPC_ILL, CHILD(951), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(37, 2) /* index 951 */, + TILEGX_OPC_ILL, CHILD(956), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(39, 2) /* index 956 */, + TILEGX_OPC_ILL, CHILD(961), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(41, 2) /* index 961 */, + TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_BPT, TILEGX_OPC_ILL, + BITFIELD(33, 2) /* index 966 */, + TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_ILL, CHILD(971), + BITFIELD(35, 2) /* index 971 */, + TILEGX_OPC_ILL, CHILD(976), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(37, 2) /* index 976 */, + TILEGX_OPC_ILL, CHILD(981), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(39, 2) /* index 981 */, + TILEGX_OPC_ILL, CHILD(986), TILEGX_OPC_ILL, TILEGX_OPC_ILL, + BITFIELD(41, 2) /* index 986 */, + TILEGX_OPC_ILL, TILEGX_OPC_ILL, TILEGX_OPC_RAISE, TILEGX_OPC_ILL, + BITFIELD(31, 2) /* index 991 */, + TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(996), + BITFIELD(33, 2) /* index 996 */, + TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(1001), + BITFIELD(35, 2) /* index 1001 */, + TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, + TILEGX_OPC_PREFETCH_L1_FAULT, + BITFIELD(43, 3) /* index 1006 */, + CHILD(1015), CHILD(1030), CHILD(1045), CHILD(1060), CHILD(1075), + TILEGX_OPC_LDNA, TILEGX_OPC_LDNT1S, TILEGX_OPC_LDNT1U, + BITFIELD(31, 2) /* index 1015 */, + TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(1020), + BITFIELD(33, 2) /* index 1020 */, + TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(1025), + BITFIELD(35, 2) /* index 1025 */, + TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_PREFETCH, + BITFIELD(31, 2) /* index 1030 */, + TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(1035), + BITFIELD(33, 2) /* index 1035 */, + TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(1040), + BITFIELD(35, 2) /* index 1040 */, + TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, + TILEGX_OPC_PREFETCH_L2_FAULT, + BITFIELD(31, 2) /* index 1045 */, + TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(1050), + BITFIELD(33, 2) /* index 1050 */, + TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(1055), + BITFIELD(35, 2) /* index 1055 */, + TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_PREFETCH_L2, + BITFIELD(31, 2) /* index 1060 */, + TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(1065), + BITFIELD(33, 2) /* index 1065 */, + TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(1070), + BITFIELD(35, 2) /* index 1070 */, + TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, + TILEGX_OPC_PREFETCH_L3_FAULT, + BITFIELD(31, 2) /* index 1075 */, + TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(1080), + BITFIELD(33, 2) /* index 1080 */, + TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(1085), + BITFIELD(35, 2) /* index 1085 */, + TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_PREFETCH_L3, + BITFIELD(43, 3) /* index 1090 */, + TILEGX_OPC_LDNT2S, TILEGX_OPC_LDNT2U, TILEGX_OPC_LDNT4S, TILEGX_OPC_LDNT4U, + TILEGX_OPC_LDNT, TILEGX_OPC_LD, TILEGX_OPC_LNK, TILEGX_OPC_MF, + BITFIELD(43, 3) /* index 1099 */, + TILEGX_OPC_NAP, TILEGX_OPC_NOP, TILEGX_OPC_SWINT0, TILEGX_OPC_SWINT1, + TILEGX_OPC_SWINT2, TILEGX_OPC_SWINT3, TILEGX_OPC_WH64, TILEGX_OPC_NONE, + BITFIELD(49, 4) /* index 1108 */, + TILEGX_OPC_V1MAXU, TILEGX_OPC_V1MINU, TILEGX_OPC_V1MNZ, TILEGX_OPC_V1MZ, + TILEGX_OPC_V1SHL, TILEGX_OPC_V1SHRS, TILEGX_OPC_V1SHRU, TILEGX_OPC_V1SUBUC, + TILEGX_OPC_V1SUB, TILEGX_OPC_V2ADDSC, TILEGX_OPC_V2ADD, TILEGX_OPC_V2CMPEQ, + TILEGX_OPC_V2CMPLES, TILEGX_OPC_V2CMPLEU, TILEGX_OPC_V2CMPLTS, + TILEGX_OPC_V2CMPLTU, + BITFIELD(49, 4) /* index 1125 */, + TILEGX_OPC_V2CMPNE, TILEGX_OPC_V2INT_H, TILEGX_OPC_V2INT_L, + TILEGX_OPC_V2MAXS, TILEGX_OPC_V2MINS, TILEGX_OPC_V2MNZ, TILEGX_OPC_V2MZ, + TILEGX_OPC_V2PACKH, TILEGX_OPC_V2PACKL, TILEGX_OPC_V2PACKUC, + TILEGX_OPC_V2SHLSC, TILEGX_OPC_V2SHL, TILEGX_OPC_V2SHRS, TILEGX_OPC_V2SHRU, + TILEGX_OPC_V2SUBSC, TILEGX_OPC_V2SUB, + BITFIELD(49, 4) /* index 1142 */, + TILEGX_OPC_V4ADDSC, TILEGX_OPC_V4ADD, TILEGX_OPC_V4INT_H, + TILEGX_OPC_V4INT_L, TILEGX_OPC_V4PACKSC, TILEGX_OPC_V4SHLSC, + TILEGX_OPC_V4SHL, TILEGX_OPC_V4SHRS, TILEGX_OPC_V4SHRU, TILEGX_OPC_V4SUBSC, + TILEGX_OPC_V4SUB, TILEGX_OPC_XOR, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(49, 4) /* index 1159 */, + TILEGX_OPC_NONE, TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHLXI, + TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, TILEGX_OPC_SHRUXI, TILEGX_OPC_V1SHLI, + TILEGX_OPC_V1SHRSI, TILEGX_OPC_V1SHRUI, TILEGX_OPC_V2SHLI, + TILEGX_OPC_V2SHRSI, TILEGX_OPC_V2SHRUI, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, + BITFIELD(31, 2) /* index 1176 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(1181), + BITFIELD(33, 2) /* index 1181 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(1186), + BITFIELD(35, 2) /* index 1186 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(1191), + BITFIELD(37, 2) /* index 1191 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(1196), + BITFIELD(39, 2) /* index 1196 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + CHILD(1201), + BITFIELD(41, 2) /* index 1201 */, + TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, TILEGX_OPC_SHL16INSLI, + TILEGX_OPC_INFOL, +}; + +static const unsigned short decode_Y0_fsm[178] = +{ + BITFIELD(27, 4) /* index 0 */, + CHILD(17), TILEGX_OPC_ADDXI, CHILD(32), TILEGX_OPC_CMPEQI, + TILEGX_OPC_CMPLTSI, CHILD(62), CHILD(67), CHILD(118), CHILD(123), + CHILD(128), CHILD(133), CHILD(153), CHILD(158), CHILD(163), CHILD(168), + CHILD(173), + BITFIELD(6, 2) /* index 17 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(22), + BITFIELD(8, 2) /* index 22 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(27), + BITFIELD(10, 2) /* index 27 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, + BITFIELD(0, 2) /* index 32 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(37), + BITFIELD(2, 2) /* index 37 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(42), + BITFIELD(4, 2) /* index 42 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(47), + BITFIELD(6, 2) /* index 47 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(52), + BITFIELD(8, 2) /* index 52 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(57), + BITFIELD(10, 2) /* index 57 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, + BITFIELD(18, 2) /* index 62 */, + TILEGX_OPC_ADDX, TILEGX_OPC_ADD, TILEGX_OPC_SUBX, TILEGX_OPC_SUB, + BITFIELD(15, 5) /* index 67 */, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, + TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, + TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, CHILD(100), + CHILD(109), TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(12, 3) /* index 100 */, + TILEGX_OPC_NONE, TILEGX_OPC_CLZ, TILEGX_OPC_CTZ, TILEGX_OPC_FNOP, + TILEGX_OPC_FSINGLE_PACK1, TILEGX_OPC_NOP, TILEGX_OPC_PCNT, + TILEGX_OPC_REVBITS, + BITFIELD(12, 3) /* index 109 */, + TILEGX_OPC_REVBYTES, TILEGX_OPC_TBLIDXB0, TILEGX_OPC_TBLIDXB1, + TILEGX_OPC_TBLIDXB2, TILEGX_OPC_TBLIDXB3, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + TILEGX_OPC_NONE, + BITFIELD(18, 2) /* index 118 */, + TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, + BITFIELD(18, 2) /* index 123 */, + TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPNE, TILEGX_OPC_MULAX, TILEGX_OPC_MULX, + BITFIELD(18, 2) /* index 128 */, + TILEGX_OPC_CMOVEQZ, TILEGX_OPC_CMOVNEZ, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, + BITFIELD(18, 2) /* index 133 */, + TILEGX_OPC_AND, TILEGX_OPC_NOR, CHILD(138), TILEGX_OPC_XOR, + BITFIELD(12, 2) /* index 138 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(143), + BITFIELD(14, 2) /* index 143 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(148), + BITFIELD(16, 2) /* index 148 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, + BITFIELD(18, 2) /* index 153 */, + TILEGX_OPC_ROTL, TILEGX_OPC_SHL, TILEGX_OPC_SHRS, TILEGX_OPC_SHRU, + BITFIELD(18, 2) /* index 158 */, + TILEGX_OPC_NONE, TILEGX_OPC_SHL1ADDX, TILEGX_OPC_SHL2ADDX, + TILEGX_OPC_SHL3ADDX, + BITFIELD(18, 2) /* index 163 */, + TILEGX_OPC_MUL_HS_HS, TILEGX_OPC_MUL_HU_HU, TILEGX_OPC_MUL_LS_LS, + TILEGX_OPC_MUL_LU_LU, + BITFIELD(18, 2) /* index 168 */, + TILEGX_OPC_MULA_HS_HS, TILEGX_OPC_MULA_HU_HU, TILEGX_OPC_MULA_LS_LS, + TILEGX_OPC_MULA_LU_LU, + BITFIELD(18, 2) /* index 173 */, + TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, +}; + +static const unsigned short decode_Y1_fsm[167] = +{ + BITFIELD(58, 4) /* index 0 */, + TILEGX_OPC_NONE, CHILD(17), TILEGX_OPC_ADDXI, CHILD(32), TILEGX_OPC_CMPEQI, + TILEGX_OPC_CMPLTSI, CHILD(62), CHILD(67), CHILD(117), CHILD(122), + CHILD(127), CHILD(132), CHILD(152), CHILD(157), CHILD(162), TILEGX_OPC_NONE, + BITFIELD(37, 2) /* index 17 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(22), + BITFIELD(39, 2) /* index 22 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, CHILD(27), + BITFIELD(41, 2) /* index 27 */, + TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_ADDI, TILEGX_OPC_MOVEI, + BITFIELD(31, 2) /* index 32 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(37), + BITFIELD(33, 2) /* index 37 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(42), + BITFIELD(35, 2) /* index 42 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(47), + BITFIELD(37, 2) /* index 47 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(52), + BITFIELD(39, 2) /* index 52 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, CHILD(57), + BITFIELD(41, 2) /* index 57 */, + TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_ANDI, TILEGX_OPC_INFO, + BITFIELD(49, 2) /* index 62 */, + TILEGX_OPC_ADDX, TILEGX_OPC_ADD, TILEGX_OPC_SUBX, TILEGX_OPC_SUB, + BITFIELD(47, 4) /* index 67 */, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL1ADD, + TILEGX_OPC_SHL1ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, + TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL2ADD, TILEGX_OPC_SHL3ADD, + TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, TILEGX_OPC_SHL3ADD, CHILD(84), + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_NONE, + BITFIELD(43, 3) /* index 84 */, + CHILD(93), CHILD(96), CHILD(99), CHILD(102), CHILD(105), CHILD(108), + CHILD(111), CHILD(114), + BITFIELD(46, 1) /* index 93 */, + TILEGX_OPC_NONE, TILEGX_OPC_FNOP, + BITFIELD(46, 1) /* index 96 */, + TILEGX_OPC_NONE, TILEGX_OPC_ILL, + BITFIELD(46, 1) /* index 99 */, + TILEGX_OPC_NONE, TILEGX_OPC_JALRP, + BITFIELD(46, 1) /* index 102 */, + TILEGX_OPC_NONE, TILEGX_OPC_JALR, + BITFIELD(46, 1) /* index 105 */, + TILEGX_OPC_NONE, TILEGX_OPC_JRP, + BITFIELD(46, 1) /* index 108 */, + TILEGX_OPC_NONE, TILEGX_OPC_JR, + BITFIELD(46, 1) /* index 111 */, + TILEGX_OPC_NONE, TILEGX_OPC_LNK, + BITFIELD(46, 1) /* index 114 */, + TILEGX_OPC_NONE, TILEGX_OPC_NOP, + BITFIELD(49, 2) /* index 117 */, + TILEGX_OPC_CMPLES, TILEGX_OPC_CMPLEU, TILEGX_OPC_CMPLTS, TILEGX_OPC_CMPLTU, + BITFIELD(49, 2) /* index 122 */, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_CMPEQ, TILEGX_OPC_CMPNE, + BITFIELD(49, 2) /* index 127 */, + TILEGX_OPC_NONE, TILEGX_OPC_NONE, TILEGX_OPC_MNZ, TILEGX_OPC_MZ, + BITFIELD(49, 2) /* index 132 */, + TILEGX_OPC_AND, TILEGX_OPC_NOR, CHILD(137), TILEGX_OPC_XOR, + BITFIELD(43, 2) /* index 137 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(142), + BITFIELD(45, 2) /* index 142 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, CHILD(147), + BITFIELD(47, 2) /* index 147 */, + TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_OR, TILEGX_OPC_MOVE, + BITFIELD(49, 2) /* index 152 */, + TILEGX_OPC_ROTL, TILEGX_OPC_SHL, TILEGX_OPC_SHRS, TILEGX_OPC_SHRU, + BITFIELD(49, 2) /* index 157 */, + TILEGX_OPC_NONE, TILEGX_OPC_SHL1ADDX, TILEGX_OPC_SHL2ADDX, + TILEGX_OPC_SHL3ADDX, + BITFIELD(49, 2) /* index 162 */, + TILEGX_OPC_ROTLI, TILEGX_OPC_SHLI, TILEGX_OPC_SHRSI, TILEGX_OPC_SHRUI, +}; + +static const unsigned short decode_Y2_fsm[118] = +{ + BITFIELD(62, 2) /* index 0 */, + TILEGX_OPC_NONE, CHILD(5), CHILD(66), CHILD(109), + BITFIELD(55, 3) /* index 5 */, + CHILD(14), CHILD(14), CHILD(14), CHILD(17), CHILD(40), CHILD(40), CHILD(40), + CHILD(43), + BITFIELD(26, 1) /* index 14 */, + TILEGX_OPC_LD1S, TILEGX_OPC_LD1U, + BITFIELD(26, 1) /* index 17 */, + CHILD(20), CHILD(30), + BITFIELD(51, 2) /* index 20 */, + TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, CHILD(25), + BITFIELD(53, 2) /* index 25 */, + TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, TILEGX_OPC_LD1S, + TILEGX_OPC_PREFETCH_L1_FAULT, + BITFIELD(51, 2) /* index 30 */, + TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, CHILD(35), + BITFIELD(53, 2) /* index 35 */, + TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_LD1U, TILEGX_OPC_PREFETCH, + BITFIELD(26, 1) /* index 40 */, + TILEGX_OPC_LD2S, TILEGX_OPC_LD2U, + BITFIELD(26, 1) /* index 43 */, + CHILD(46), CHILD(56), + BITFIELD(51, 2) /* index 46 */, + TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, CHILD(51), + BITFIELD(53, 2) /* index 51 */, + TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, TILEGX_OPC_LD2S, + TILEGX_OPC_PREFETCH_L2_FAULT, + BITFIELD(51, 2) /* index 56 */, + TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, CHILD(61), + BITFIELD(53, 2) /* index 61 */, + TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_LD2U, TILEGX_OPC_PREFETCH_L2, + BITFIELD(56, 2) /* index 66 */, + CHILD(71), CHILD(74), CHILD(90), CHILD(93), + BITFIELD(26, 1) /* index 71 */, + TILEGX_OPC_NONE, TILEGX_OPC_LD4S, + BITFIELD(26, 1) /* index 74 */, + TILEGX_OPC_NONE, CHILD(77), + BITFIELD(51, 2) /* index 77 */, + TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(82), + BITFIELD(53, 2) /* index 82 */, + TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, TILEGX_OPC_LD4S, CHILD(87), + BITFIELD(55, 1) /* index 87 */, + TILEGX_OPC_LD4S, TILEGX_OPC_PREFETCH_L3_FAULT, + BITFIELD(26, 1) /* index 90 */, + TILEGX_OPC_LD4U, TILEGX_OPC_LD, + BITFIELD(26, 1) /* index 93 */, + CHILD(96), TILEGX_OPC_LD, + BITFIELD(51, 2) /* index 96 */, + TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(101), + BITFIELD(53, 2) /* index 101 */, + TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, TILEGX_OPC_LD4U, CHILD(106), + BITFIELD(55, 1) /* index 106 */, + TILEGX_OPC_LD4U, TILEGX_OPC_PREFETCH_L3, + BITFIELD(26, 1) /* index 109 */, + CHILD(112), CHILD(115), + BITFIELD(57, 1) /* index 112 */, + TILEGX_OPC_ST1, TILEGX_OPC_ST4, + BITFIELD(57, 1) /* index 115 */, + TILEGX_OPC_ST2, TILEGX_OPC_ST, +}; + +#undef BITFIELD +#undef CHILD +const unsigned short * const +tilegx_bundle_decoder_fsms[TILEGX_NUM_PIPELINE_ENCODINGS] = +{ + decode_X0_fsm, + decode_X1_fsm, + decode_Y0_fsm, + decode_Y1_fsm, + decode_Y2_fsm +}; +const struct tilegx_operand tilegx_operands[35] = +{ + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_X0), + 8, 1, 0, 0, 0, 0, + create_Imm8_X0, get_Imm8_X0 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_X1), + 8, 1, 0, 0, 0, 0, + create_Imm8_X1, get_Imm8_X1 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_Y0), + 8, 1, 0, 0, 0, 0, + create_Imm8_Y0, get_Imm8_Y0 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM8_Y1), + 8, 1, 0, 0, 0, 0, + create_Imm8_Y1, get_Imm8_Y1 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM16_X0_HW0_LAST), + 16, 1, 0, 0, 0, 0, + create_Imm16_X0, get_Imm16_X0 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_IMM16_X1_HW0_LAST), + 16, 1, 0, 0, 0, 0, + create_Imm16_X1, get_Imm16_X1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 0, 1, 0, 0, + create_Dest_X0, get_Dest_X0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcA_X0, get_SrcA_X0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 0, 1, 0, 0, + create_Dest_X1, get_Dest_X1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcA_X1, get_SrcA_X1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 0, 1, 0, 0, + create_Dest_Y0, get_Dest_Y0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcA_Y0, get_SrcA_Y0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 0, 1, 0, 0, + create_Dest_Y1, get_Dest_Y1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcA_Y1, get_SrcA_Y1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcA_Y2, get_SrcA_Y2 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 1, 0, 0, + create_SrcA_X1, get_SrcA_X1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcB_X0, get_SrcB_X0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcB_X1, get_SrcB_X1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcB_Y0, get_SrcB_Y0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcB_Y1, get_SrcB_Y1 + }, + { + TILEGX_OP_TYPE_ADDRESS, BFD_RELOC(TILEGX_BROFF_X1), + 17, 1, 0, 0, 1, TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, + create_BrOff_X1, get_BrOff_X1 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE), + 6, 0, 0, 0, 0, 0, + create_BFStart_X0, get_BFStart_X0 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(NONE), + 6, 0, 0, 0, 0, 0, + create_BFEnd_X0, get_BFEnd_X0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 1, 0, 0, + create_Dest_X0, get_Dest_X0 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 1, 0, 0, + create_Dest_Y0, get_Dest_Y0 + }, + { + TILEGX_OP_TYPE_ADDRESS, BFD_RELOC(TILEGX_JUMPOFF_X1), + 27, 1, 0, 0, 1, TILEGX_LOG2_BUNDLE_ALIGNMENT_IN_BYTES, + create_JumpOff_X1, get_JumpOff_X1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 0, 1, 0, 0, + create_SrcBDest_Y2, get_SrcBDest_Y2 + }, + { + TILEGX_OP_TYPE_SPR, BFD_RELOC(TILEGX_MF_IMM14_X1), + 14, 0, 0, 0, 0, 0, + create_MF_Imm14_X1, get_MF_Imm14_X1 + }, + { + TILEGX_OP_TYPE_SPR, BFD_RELOC(TILEGX_MT_IMM14_X1), + 14, 0, 0, 0, 0, 0, + create_MT_Imm14_X1, get_MT_Imm14_X1 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_X0), + 6, 0, 0, 0, 0, 0, + create_ShAmt_X0, get_ShAmt_X0 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_X1), + 6, 0, 0, 0, 0, 0, + create_ShAmt_X1, get_ShAmt_X1 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_Y0), + 6, 0, 0, 0, 0, 0, + create_ShAmt_Y0, get_ShAmt_Y0 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_SHAMT_Y1), + 6, 0, 0, 0, 0, 0, + create_ShAmt_Y1, get_ShAmt_Y1 + }, + { + TILEGX_OP_TYPE_REGISTER, BFD_RELOC(NONE), + 6, 0, 1, 0, 0, 0, + create_SrcBDest_Y2, get_SrcBDest_Y2 + }, + { + TILEGX_OP_TYPE_IMMEDIATE, BFD_RELOC(TILEGX_DEST_IMM8_X1), + 8, 1, 0, 0, 0, 0, + create_Dest_Imm8_X1, get_Dest_Imm8_X1 + } +}; + + + + +/* Given a set of bundle bits and the lookup FSM for a specific pipe, + * returns which instruction the bundle contains in that pipe. + */ +static const struct tilegx_opcode * +find_opcode(tilegx_bundle_bits bits, const unsigned short *table) +{ + int index = 0; + + while (1) + { + unsigned short bitspec = table[index]; + unsigned int bitfield = + ((unsigned int)(bits >> (bitspec & 63))) & (bitspec >> 6); + + unsigned short next = table[index + 1 + bitfield]; + if (next <= TILEGX_OPC_NONE) + return &tilegx_opcodes[next]; + + index = next - TILEGX_OPC_NONE; + } +} + + +int +parse_insn_tilegx(tilegx_bundle_bits bits, + unsigned long long pc, + struct tilegx_decoded_instruction + decoded[TILEGX_MAX_INSTRUCTIONS_PER_BUNDLE]) +{ + int num_instructions = 0; + int pipe; + + int min_pipe, max_pipe; + if ((bits & TILEGX_BUNDLE_MODE_MASK) == 0) + { + min_pipe = TILEGX_PIPELINE_X0; + max_pipe = TILEGX_PIPELINE_X1; + } + else + { + min_pipe = TILEGX_PIPELINE_Y0; + max_pipe = TILEGX_PIPELINE_Y2; + } + + /* For each pipe, find an instruction that fits. */ + for (pipe = min_pipe; pipe <= max_pipe; pipe++) + { + const struct tilegx_opcode *opc; + struct tilegx_decoded_instruction *d; + int i; + + d = &decoded[num_instructions++]; + opc = find_opcode (bits, tilegx_bundle_decoder_fsms[pipe]); + d->opcode = opc; + + /* Decode each operand, sign extending, etc. as appropriate. */ + for (i = 0; i < opc->num_operands; i++) + { + const struct tilegx_operand *op = + &tilegx_operands[opc->operands[pipe][i]]; + int raw_opval = op->extract (bits); + long long opval; + + if (op->is_signed) + { + /* Sign-extend the operand. */ + int shift = (int)((sizeof(int) * 8) - op->num_bits); + raw_opval = (raw_opval << shift) >> shift; + } + + /* Adjust PC-relative scaled branch offsets. */ + if (op->type == TILEGX_OP_TYPE_ADDRESS) + opval = (raw_opval * TILEGX_BUNDLE_SIZE_IN_BYTES) + pc; + else + opval = raw_opval; + + /* Record the final value. */ + d->operands[i] = op; + d->operand_values[i] = opval; + } + } + + return num_instructions; +} diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c index 49a605be94c5..c4be58cc5d50 100644 --- a/arch/tile/kernel/time.c +++ b/arch/tile/kernel/time.c @@ -22,6 +22,7 @@ #include <linux/sched.h> #include <linux/smp.h> #include <linux/delay.h> +#include <linux/module.h> #include <asm/irq_regs.h> #include <asm/traps.h> #include <hv/hypervisor.h> @@ -56,6 +57,7 @@ cycles_t get_cycles(void) return (((cycles_t)high) << 32) | low; } +EXPORT_SYMBOL(get_cycles); #endif /* diff --git a/arch/tile/kernel/tlb.c b/arch/tile/kernel/tlb.c index 2dffc1044d83..a5f241c24cac 100644 --- a/arch/tile/kernel/tlb.c +++ b/arch/tile/kernel/tlb.c @@ -34,13 +34,13 @@ void flush_tlb_mm(struct mm_struct *mm) { HV_Remote_ASID asids[NR_CPUS]; int i = 0, cpu; - for_each_cpu(cpu, &mm->cpu_vm_mask) { + for_each_cpu(cpu, mm_cpumask(mm)) { HV_Remote_ASID *asid = &asids[i++]; asid->y = cpu / smp_topology.width; asid->x = cpu % smp_topology.width; asid->asid = per_cpu(current_asid, cpu); } - flush_remote(0, HV_FLUSH_EVICT_L1I, &mm->cpu_vm_mask, + flush_remote(0, HV_FLUSH_EVICT_L1I, mm_cpumask(mm), 0, 0, 0, NULL, asids, i); } @@ -54,8 +54,8 @@ void flush_tlb_page_mm(const struct vm_area_struct *vma, struct mm_struct *mm, { unsigned long size = hv_page_size(vma); int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0; - flush_remote(0, cache, &mm->cpu_vm_mask, - va, size, size, &mm->cpu_vm_mask, NULL, 0); + flush_remote(0, cache, mm_cpumask(mm), + va, size, size, mm_cpumask(mm), NULL, 0); } void flush_tlb_page(const struct vm_area_struct *vma, unsigned long va) @@ -70,8 +70,8 @@ void flush_tlb_range(const struct vm_area_struct *vma, unsigned long size = hv_page_size(vma); struct mm_struct *mm = vma->vm_mm; int cache = (vma->vm_flags & VM_EXEC) ? HV_FLUSH_EVICT_L1I : 0; - flush_remote(0, cache, &mm->cpu_vm_mask, start, end - start, size, - &mm->cpu_vm_mask, NULL, 0); + flush_remote(0, cache, mm_cpumask(mm), start, end - start, size, + mm_cpumask(mm), NULL, 0); } void flush_tlb_all(void) diff --git a/arch/tile/kernel/traps.c b/arch/tile/kernel/traps.c index 5474fc2e77e8..f9803dfa7357 100644 --- a/arch/tile/kernel/traps.c +++ b/arch/tile/kernel/traps.c @@ -308,6 +308,7 @@ void __kprobes do_trap(struct pt_regs *regs, int fault_num, info.si_addr = (void __user *)address; if (signo == SIGILL) info.si_trapno = fault_num; + trace_unhandled_signal("trap", regs, address, signo); force_sig_info(signo, &info, current); } diff --git a/arch/tile/kernel/vmlinux.lds.S b/arch/tile/kernel/vmlinux.lds.S index 38f64fafdc10..631f10de12fe 100644 --- a/arch/tile/kernel/vmlinux.lds.S +++ b/arch/tile/kernel/vmlinux.lds.S @@ -60,7 +60,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_sinitdata) = .; INIT_DATA_SECTION(16) :data =0 - PERCPU(L2_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(L2_CACHE_BYTES) . = ALIGN(PAGE_SIZE); VMLINUX_SYMBOL(_einitdata) = .; diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S index 82f64cc63658..24448734f6f1 100644 --- a/arch/tile/lib/atomic_asm_32.S +++ b/arch/tile/lib/atomic_asm_32.S @@ -59,7 +59,7 @@ * bad kernel addresses). * * Note that if the value we would store is the same as what we - * loaded, we bypass the load. Other platforms with true atomics can + * loaded, we bypass the store. Other platforms with true atomics can * make the guarantee that a non-atomic __clear_bit(), for example, * can safely race with an atomic test_and_set_bit(); this example is * from bit_spinlock.h in slub_lock() / slub_unlock(). We can't do diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c index 35c1d8ca5f38..8928aace7a64 100644 --- a/arch/tile/lib/cacheflush.c +++ b/arch/tile/lib/cacheflush.c @@ -15,6 +15,7 @@ #include <asm/page.h> #include <asm/cacheflush.h> #include <arch/icache.h> +#include <arch/spr_def.h> void __flush_icache_range(unsigned long start, unsigned long end) @@ -39,6 +40,18 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh) char *p, *base; size_t step_size, load_count; const unsigned long STRIPE_WIDTH = 8192; +#ifdef __tilegx__ + /* + * On TILE-Gx, we must disable the dstream prefetcher before doing + * a cache flush; otherwise, we could end up with data in the cache + * that we don't want there. Note that normally we'd do an mf + * after the SPR write to disabling the prefetcher, but we do one + * below, before any further loads, so there's no need to do it + * here. + */ + uint_reg_t old_dstream_pf = __insn_mfspr(SPR_DSTREAM_PF); + __insn_mtspr(SPR_DSTREAM_PF, 0); +#endif /* * Flush and invalidate the buffer out of the local L1/L2 @@ -122,4 +135,9 @@ void finv_buffer_remote(void *buffer, size_t size, int hfh) /* Wait for the load+inv's (and thus finvs) to have completed. */ __insn_mf(); + +#ifdef __tilegx__ + /* Reenable the prefetcher. */ + __insn_mtspr(SPR_DSTREAM_PF, old_dstream_pf); +#endif } diff --git a/arch/tile/lib/memchr_64.c b/arch/tile/lib/memchr_64.c new file mode 100644 index 000000000000..84fdc8d8e735 --- /dev/null +++ b/arch/tile/lib/memchr_64.c @@ -0,0 +1,71 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +void *memchr(const void *s, int c, size_t n) +{ + const uint64_t *last_word_ptr; + const uint64_t *p; + const char *last_byte_ptr; + uintptr_t s_int; + uint64_t goal, before_mask, v, bits; + char *ret; + + if (__builtin_expect(n == 0, 0)) { + /* Don't dereference any memory if the array is empty. */ + return NULL; + } + + /* Get an aligned pointer. */ + s_int = (uintptr_t) s; + p = (const uint64_t *)(s_int & -8); + + /* Create eight copies of the byte for which we are looking. */ + goal = 0x0101010101010101ULL * (uint8_t) c; + + /* Read the first word, but munge it so that bytes before the array + * will not match goal. + * + * Note that this shift count expression works because we know + * shift counts are taken mod 64. + */ + before_mask = (1ULL << (s_int << 3)) - 1; + v = (*p | before_mask) ^ (goal & before_mask); + + /* Compute the address of the last byte. */ + last_byte_ptr = (const char *)s + n - 1; + + /* Compute the address of the word containing the last byte. */ + last_word_ptr = (const uint64_t *)((uintptr_t) last_byte_ptr & -8); + + while ((bits = __insn_v1cmpeq(v, goal)) == 0) { + if (__builtin_expect(p == last_word_ptr, 0)) { + /* We already read the last word in the array, + * so give up. + */ + return NULL; + } + v = *++p; + } + + /* We found a match, but it might be in a byte past the end + * of the array. + */ + ret = ((char *)p) + (__insn_ctz(bits) >> 3); + return (ret <= last_byte_ptr) ? ret : NULL; +} +EXPORT_SYMBOL(memchr); diff --git a/arch/tile/lib/memcpy_64.c b/arch/tile/lib/memcpy_64.c new file mode 100644 index 000000000000..3fab9a6a2bbe --- /dev/null +++ b/arch/tile/lib/memcpy_64.c @@ -0,0 +1,220 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> +#define __memcpy memcpy +/* EXPORT_SYMBOL() is in arch/tile/lib/exports.c since this should be asm. */ + +/* Must be 8 bytes in size. */ +#define word_t uint64_t + +#if CHIP_L2_LINE_SIZE() != 64 && CHIP_L2_LINE_SIZE() != 128 +#error "Assumes 64 or 128 byte line size" +#endif + +/* How many cache lines ahead should we prefetch? */ +#define PREFETCH_LINES_AHEAD 3 + +/* + * Provide "base versions" of load and store for the normal code path. + * The kernel provides other versions for userspace copies. + */ +#define ST(p, v) (*(p) = (v)) +#define LD(p) (*(p)) + +#ifndef USERCOPY_FUNC +#define ST1 ST +#define ST2 ST +#define ST4 ST +#define ST8 ST +#define LD1 LD +#define LD2 LD +#define LD4 LD +#define LD8 LD +#define RETVAL dstv +void *memcpy(void *__restrict dstv, const void *__restrict srcv, size_t n) +#else +/* + * Special kernel version will provide implementation of the LDn/STn + * macros to return a count of uncopied bytes due to mm fault. + */ +#define RETVAL 0 +int USERCOPY_FUNC(void *__restrict dstv, const void *__restrict srcv, size_t n) +#endif +{ + char *__restrict dst1 = (char *)dstv; + const char *__restrict src1 = (const char *)srcv; + const char *__restrict src1_end; + const char *__restrict prefetch; + word_t *__restrict dst8; /* 8-byte pointer to destination memory. */ + word_t final; /* Final bytes to write to trailing word, if any */ + long i; + + if (n < 16) { + for (; n; n--) + ST1(dst1++, LD1(src1++)); + return RETVAL; + } + + /* + * Locate the end of source memory we will copy. Don't + * prefetch past this. + */ + src1_end = src1 + n - 1; + + /* Prefetch ahead a few cache lines, but not past the end. */ + prefetch = src1; + for (i = 0; i < PREFETCH_LINES_AHEAD; i++) { + __insn_prefetch(prefetch); + prefetch += CHIP_L2_LINE_SIZE(); + prefetch = (prefetch > src1_end) ? prefetch : src1; + } + + /* Copy bytes until dst is word-aligned. */ + for (; (uintptr_t)dst1 & (sizeof(word_t) - 1); n--) + ST1(dst1++, LD1(src1++)); + + /* 8-byte pointer to destination memory. */ + dst8 = (word_t *)dst1; + + if (__builtin_expect((uintptr_t)src1 & (sizeof(word_t) - 1), 0)) { + /* + * Misaligned copy. Copy 8 bytes at a time, but don't + * bother with other fanciness. + * + * TODO: Consider prefetching and using wh64 as well. + */ + + /* Create an aligned src8. */ + const word_t *__restrict src8 = + (const word_t *)((uintptr_t)src1 & -sizeof(word_t)); + word_t b; + + word_t a = LD8(src8++); + for (; n >= sizeof(word_t); n -= sizeof(word_t)) { + b = LD8(src8++); + a = __insn_dblalign(a, b, src1); + ST8(dst8++, a); + a = b; + } + + if (n == 0) + return RETVAL; + + b = ((const char *)src8 <= src1_end) ? *src8 : 0; + + /* + * Final source bytes to write to trailing partial + * word, if any. + */ + final = __insn_dblalign(a, b, src1); + } else { + /* Aligned copy. */ + + const word_t* __restrict src8 = (const word_t *)src1; + + /* src8 and dst8 are both word-aligned. */ + if (n >= CHIP_L2_LINE_SIZE()) { + /* Copy until 'dst' is cache-line-aligned. */ + for (; (uintptr_t)dst8 & (CHIP_L2_LINE_SIZE() - 1); + n -= sizeof(word_t)) + ST8(dst8++, LD8(src8++)); + + for (; n >= CHIP_L2_LINE_SIZE(); ) { + __insn_wh64(dst8); + + /* + * Prefetch and advance to next line + * to prefetch, but don't go past the end + */ + __insn_prefetch(prefetch); + prefetch += CHIP_L2_LINE_SIZE(); + prefetch = (prefetch > src1_end) ? prefetch : + (const char *)src8; + + /* + * Copy an entire cache line. Manually + * unrolled to avoid idiosyncracies of + * compiler unrolling. + */ +#define COPY_WORD(offset) ({ ST8(dst8+offset, LD8(src8+offset)); n -= 8; }) + COPY_WORD(0); + COPY_WORD(1); + COPY_WORD(2); + COPY_WORD(3); + COPY_WORD(4); + COPY_WORD(5); + COPY_WORD(6); + COPY_WORD(7); +#if CHIP_L2_LINE_SIZE() == 128 + COPY_WORD(8); + COPY_WORD(9); + COPY_WORD(10); + COPY_WORD(11); + COPY_WORD(12); + COPY_WORD(13); + COPY_WORD(14); + COPY_WORD(15); +#elif CHIP_L2_LINE_SIZE() != 64 +# error Fix code that assumes particular L2 cache line sizes +#endif + + dst8 += CHIP_L2_LINE_SIZE() / sizeof(word_t); + src8 += CHIP_L2_LINE_SIZE() / sizeof(word_t); + } + } + + for (; n >= sizeof(word_t); n -= sizeof(word_t)) + ST8(dst8++, LD8(src8++)); + + if (__builtin_expect(n == 0, 1)) + return RETVAL; + + final = LD8(src8); + } + + /* n != 0 if we get here. Write out any trailing bytes. */ + dst1 = (char *)dst8; + if (n & 4) { + ST4((uint32_t *)dst1, final); + dst1 += 4; + final >>= 32; + n &= 3; + } + if (n & 2) { + ST2((uint16_t *)dst1, final); + dst1 += 2; + final >>= 16; + n &= 1; + } + if (n) + ST1((uint8_t *)dst1, final); + + return RETVAL; +} + + +#ifdef USERCOPY_FUNC +#undef ST1 +#undef ST2 +#undef ST4 +#undef ST8 +#undef LD1 +#undef LD2 +#undef LD4 +#undef LD8 +#undef USERCOPY_FUNC +#endif diff --git a/arch/tile/lib/memcpy_user_64.c b/arch/tile/lib/memcpy_user_64.c new file mode 100644 index 000000000000..4763b3aff1cc --- /dev/null +++ b/arch/tile/lib/memcpy_user_64.c @@ -0,0 +1,86 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Do memcpy(), but trap and return "n" when a load or store faults. + * + * Note: this idiom only works when memcpy() compiles to a leaf function. + * If "sp" is updated during memcpy, the "jrp lr" will be incorrect. + * + * Also note that we are capturing "n" from the containing scope here. + */ + +#define _ST(p, inst, v) \ + ({ \ + asm("1: " #inst " %0, %1;" \ + ".pushsection .coldtext.memcpy,\"ax\";" \ + "2: { move r0, %2; jrp lr };" \ + ".section __ex_table,\"a\";" \ + ".quad 1b, 2b;" \ + ".popsection" \ + : "=m" (*(p)) : "r" (v), "r" (n)); \ + }) + +#define _LD(p, inst) \ + ({ \ + unsigned long __v; \ + asm("1: " #inst " %0, %1;" \ + ".pushsection .coldtext.memcpy,\"ax\";" \ + "2: { move r0, %2; jrp lr };" \ + ".section __ex_table,\"a\";" \ + ".quad 1b, 2b;" \ + ".popsection" \ + : "=r" (__v) : "m" (*(p)), "r" (n)); \ + __v; \ + }) + +#define USERCOPY_FUNC __copy_to_user_inatomic +#define ST1(p, v) _ST((p), st1, (v)) +#define ST2(p, v) _ST((p), st2, (v)) +#define ST4(p, v) _ST((p), st4, (v)) +#define ST8(p, v) _ST((p), st, (v)) +#define LD1 LD +#define LD2 LD +#define LD4 LD +#define LD8 LD +#include "memcpy_64.c" + +#define USERCOPY_FUNC __copy_from_user_inatomic +#define ST1 ST +#define ST2 ST +#define ST4 ST +#define ST8 ST +#define LD1(p) _LD((p), ld1u) +#define LD2(p) _LD((p), ld2u) +#define LD4(p) _LD((p), ld4u) +#define LD8(p) _LD((p), ld) +#include "memcpy_64.c" + +#define USERCOPY_FUNC __copy_in_user_inatomic +#define ST1(p, v) _ST((p), st1, (v)) +#define ST2(p, v) _ST((p), st2, (v)) +#define ST4(p, v) _ST((p), st4, (v)) +#define ST8(p, v) _ST((p), st, (v)) +#define LD1(p) _LD((p), ld1u) +#define LD2(p) _LD((p), ld2u) +#define LD4(p) _LD((p), ld4u) +#define LD8(p) _LD((p), ld) +#include "memcpy_64.c" + +unsigned long __copy_from_user_zeroing(void *to, const void __user *from, + unsigned long n) +{ + unsigned long rc = __copy_from_user_inatomic(to, from, n); + if (unlikely(rc)) + memset(to + n - rc, 0, rc); + return rc; +} diff --git a/arch/tile/lib/memset_64.c b/arch/tile/lib/memset_64.c new file mode 100644 index 000000000000..3873085711d5 --- /dev/null +++ b/arch/tile/lib/memset_64.c @@ -0,0 +1,145 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <arch/chip.h> + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +#undef memset + +void *memset(void *s, int c, size_t n) +{ + uint64_t *out64; + int n64, to_align64; + uint64_t v64; + uint8_t *out8 = s; + + /* Experimentation shows that a trivial tight loop is a win up until + * around a size of 20, where writing a word at a time starts to win. + */ +#define BYTE_CUTOFF 20 + +#if BYTE_CUTOFF < 7 + /* This must be at least at least this big, or some code later + * on doesn't work. + */ +#error "BYTE_CUTOFF is too small" +#endif + + if (n < BYTE_CUTOFF) { + /* Strangely, this turns out to be the tightest way to + * write this loop. + */ + if (n != 0) { + do { + /* Strangely, combining these into one line + * performs worse. + */ + *out8 = c; + out8++; + } while (--n != 0); + } + + return s; + } + + /* Align 'out8'. We know n >= 7 so this won't write past the end. */ + while (((uintptr_t) out8 & 7) != 0) { + *out8++ = c; + --n; + } + + /* Align 'n'. */ + while (n & 7) + out8[--n] = c; + + out64 = (uint64_t *) out8; + n64 = n >> 3; + + /* Tile input byte out to 64 bits. */ + /* KLUDGE */ + v64 = 0x0101010101010101ULL * (uint8_t)c; + + /* This must be at least 8 or the following loop doesn't work. */ +#define CACHE_LINE_SIZE_IN_DOUBLEWORDS (CHIP_L2_LINE_SIZE() / 8) + + /* Determine how many words we need to emit before the 'out32' + * pointer becomes aligned modulo the cache line size. + */ + to_align64 = (-((uintptr_t)out64 >> 3)) & + (CACHE_LINE_SIZE_IN_DOUBLEWORDS - 1); + + /* Only bother aligning and using wh64 if there is at least + * one full cache line to process. This check also prevents + * overrunning the end of the buffer with alignment words. + */ + if (to_align64 <= n64 - CACHE_LINE_SIZE_IN_DOUBLEWORDS) { + int lines_left; + + /* Align out64 mod the cache line size so we can use wh64. */ + n64 -= to_align64; + for (; to_align64 != 0; to_align64--) { + *out64 = v64; + out64++; + } + + /* Use unsigned divide to turn this into a right shift. */ + lines_left = (unsigned)n64 / CACHE_LINE_SIZE_IN_DOUBLEWORDS; + + do { + /* Only wh64 a few lines at a time, so we don't + * exceed the maximum number of victim lines. + */ + int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS()) + ? lines_left + : CHIP_MAX_OUTSTANDING_VICTIMS()); + uint64_t *wh = out64; + int i = x; + int j; + + lines_left -= x; + + do { + __insn_wh64(wh); + wh += CACHE_LINE_SIZE_IN_DOUBLEWORDS; + } while (--i); + + for (j = x * (CACHE_LINE_SIZE_IN_DOUBLEWORDS / 4); + j != 0; j--) { + *out64++ = v64; + *out64++ = v64; + *out64++ = v64; + *out64++ = v64; + } + } while (lines_left != 0); + + /* We processed all full lines above, so only this many + * words remain to be processed. + */ + n64 &= CACHE_LINE_SIZE_IN_DOUBLEWORDS - 1; + } + + /* Now handle any leftover values. */ + if (n64 != 0) { + do { + *out64 = v64; + out64++; + } while (--n64 != 0); + } + + return s; +} +EXPORT_SYMBOL(memset); diff --git a/arch/tile/lib/spinlock_64.c b/arch/tile/lib/spinlock_64.c new file mode 100644 index 000000000000..d6fb9581e980 --- /dev/null +++ b/arch/tile/lib/spinlock_64.c @@ -0,0 +1,104 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/spinlock.h> +#include <linux/module.h> +#include <asm/processor.h> + +#include "spinlock_common.h" + +/* + * Read the spinlock value without allocating in our cache and without + * causing an invalidation to another cpu with a copy of the cacheline. + * This is important when we are spinning waiting for the lock. + */ +static inline u32 arch_spin_read_noalloc(void *lock) +{ + return atomic_cmpxchg((atomic_t *)lock, -1, -1); +} + +/* + * Wait until the high bits (current) match my ticket. + * If we notice the overflow bit set on entry, we clear it. + */ +void arch_spin_lock_slow(arch_spinlock_t *lock, u32 my_ticket) +{ + if (unlikely(my_ticket & __ARCH_SPIN_NEXT_OVERFLOW)) { + __insn_fetchand4(&lock->lock, ~__ARCH_SPIN_NEXT_OVERFLOW); + my_ticket &= ~__ARCH_SPIN_NEXT_OVERFLOW; + } + + for (;;) { + u32 val = arch_spin_read_noalloc(lock); + u32 delta = my_ticket - arch_spin_current(val); + if (delta == 0) + return; + relax((128 / CYCLES_PER_RELAX_LOOP) * delta); + } +} +EXPORT_SYMBOL(arch_spin_lock_slow); + +/* + * Check the lock to see if it is plausible, and try to get it with cmpxchg(). + */ +int arch_spin_trylock(arch_spinlock_t *lock) +{ + u32 val = arch_spin_read_noalloc(lock); + if (unlikely(arch_spin_current(val) != arch_spin_next(val))) + return 0; + return cmpxchg(&lock->lock, val, (val + 1) & ~__ARCH_SPIN_NEXT_OVERFLOW) + == val; +} +EXPORT_SYMBOL(arch_spin_trylock); + +void arch_spin_unlock_wait(arch_spinlock_t *lock) +{ + u32 iterations = 0; + while (arch_spin_is_locked(lock)) + delay_backoff(iterations++); +} +EXPORT_SYMBOL(arch_spin_unlock_wait); + +/* + * If the read lock fails due to a writer, we retry periodically + * until the value is positive and we write our incremented reader count. + */ +void __read_lock_failed(arch_rwlock_t *rw) +{ + u32 val; + int iterations = 0; + do { + delay_backoff(iterations++); + val = __insn_fetchaddgez4(&rw->lock, 1); + } while (unlikely(arch_write_val_locked(val))); +} +EXPORT_SYMBOL(__read_lock_failed); + +/* + * If we failed because there were readers, clear the "writer" bit + * so we don't block additional readers. Otherwise, there was another + * writer anyway, so our "fetchor" made no difference. Then wait, + * issuing periodic fetchor instructions, till we get the lock. + */ +void __write_lock_failed(arch_rwlock_t *rw, u32 val) +{ + int iterations = 0; + do { + if (!arch_write_val_locked(val)) + val = __insn_fetchand4(&rw->lock, ~__WRITE_LOCK_BIT); + delay_backoff(iterations++); + val = __insn_fetchor4(&rw->lock, __WRITE_LOCK_BIT); + } while (val != 0); +} +EXPORT_SYMBOL(__write_lock_failed); diff --git a/arch/tile/lib/strchr_64.c b/arch/tile/lib/strchr_64.c new file mode 100644 index 000000000000..617a9273aaa8 --- /dev/null +++ b/arch/tile/lib/strchr_64.c @@ -0,0 +1,67 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +#undef strchr + +char *strchr(const char *s, int c) +{ + int z, g; + + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint64_t *p = (const uint64_t *)(s_int & -8); + + /* Create eight copies of the byte for which we are looking. */ + const uint64_t goal = 0x0101010101010101ULL * (uint8_t) c; + + /* Read the first aligned word, but force bytes before the string to + * match neither zero nor goal (we make sure the high bit of each + * byte is 1, and the low 7 bits are all the opposite of the goal + * byte). + * + * Note that this shift count expression works because we know shift + * counts are taken mod 64. + */ + const uint64_t before_mask = (1ULL << (s_int << 3)) - 1; + uint64_t v = (*p | before_mask) ^ + (goal & __insn_v1shrsi(before_mask, 1)); + + uint64_t zero_matches, goal_matches; + while (1) { + /* Look for a terminating '\0'. */ + zero_matches = __insn_v1cmpeqi(v, 0); + + /* Look for the goal byte. */ + goal_matches = __insn_v1cmpeq(v, goal); + + if (__builtin_expect((zero_matches | goal_matches) != 0, 0)) + break; + + v = *++p; + } + + z = __insn_ctz(zero_matches); + g = __insn_ctz(goal_matches); + + /* If we found c before '\0' we got a match. Note that if c == '\0' + * then g == z, and we correctly return the address of the '\0' + * rather than NULL. + */ + return (g <= z) ? ((char *)p) + (g >> 3) : NULL; +} +EXPORT_SYMBOL(strchr); diff --git a/arch/tile/lib/strlen_64.c b/arch/tile/lib/strlen_64.c new file mode 100644 index 000000000000..1c92d46202a8 --- /dev/null +++ b/arch/tile/lib/strlen_64.c @@ -0,0 +1,38 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +#undef strlen + +size_t strlen(const char *s) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint64_t *p = (const uint64_t *)(s_int & -8); + + /* Read the first word, but force bytes before the string to be nonzero. + * This expression works because we know shift counts are taken mod 64. + */ + uint64_t v = *p | ((1ULL << (s_int << 3)) - 1); + + uint64_t bits; + while ((bits = __insn_v1cmpeqi(v, 0)) == 0) + v = *++p; + + return ((const char *)p) + (__insn_ctz(bits) >> 3) - s; +} +EXPORT_SYMBOL(strlen); diff --git a/arch/tile/lib/usercopy_64.S b/arch/tile/lib/usercopy_64.S new file mode 100644 index 000000000000..2ff44f87b78e --- /dev/null +++ b/arch/tile/lib/usercopy_64.S @@ -0,0 +1,196 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/linkage.h> +#include <asm/errno.h> +#include <asm/cache.h> +#include <arch/chip.h> + +/* Access user memory, but use MMU to avoid propagating kernel exceptions. */ + + .pushsection .fixup,"ax" + +get_user_fault: + { movei r1, -EFAULT; move r0, zero } + jrp lr + ENDPROC(get_user_fault) + +put_user_fault: + { movei r0, -EFAULT; jrp lr } + ENDPROC(put_user_fault) + + .popsection + +/* + * __get_user_N functions take a pointer in r0, and return 0 in r1 + * on success, with the value in r0; or else -EFAULT in r1. + */ +#define __get_user_N(bytes, LOAD) \ + STD_ENTRY(__get_user_##bytes); \ +1: { LOAD r0, r0; move r1, zero }; \ + jrp lr; \ + STD_ENDPROC(__get_user_##bytes); \ + .pushsection __ex_table,"a"; \ + .quad 1b, get_user_fault; \ + .popsection + +__get_user_N(1, ld1u) +__get_user_N(2, ld2u) +__get_user_N(4, ld4u) +__get_user_N(8, ld) + +/* + * __put_user_N functions take a value in r0 and a pointer in r1, + * and return 0 in r0 on success or -EFAULT on failure. + */ +#define __put_user_N(bytes, STORE) \ + STD_ENTRY(__put_user_##bytes); \ +1: { STORE r1, r0; move r0, zero }; \ + jrp lr; \ + STD_ENDPROC(__put_user_##bytes); \ + .pushsection __ex_table,"a"; \ + .quad 1b, put_user_fault; \ + .popsection + +__put_user_N(1, st1) +__put_user_N(2, st2) +__put_user_N(4, st4) +__put_user_N(8, st) + +/* + * strnlen_user_asm takes the pointer in r0, and the length bound in r1. + * It returns the length, including the terminating NUL, or zero on exception. + * If length is greater than the bound, returns one plus the bound. + */ +STD_ENTRY(strnlen_user_asm) + { beqz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */ +1: { ld1u r4, r0; addi r1, r1, -1 } + beqz r4, 2f + { bnezt r1, 1b; addi r0, r0, 1 } +2: { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strnlen_user_asm) + .pushsection .fixup,"ax" +strnlen_user_fault: + { move r0, zero; jrp lr } + ENDPROC(strnlen_user_fault) + .section __ex_table,"a" + .quad 1b, strnlen_user_fault + .popsection + +/* + * strncpy_from_user_asm takes the kernel target pointer in r0, + * the userspace source pointer in r1, and the length bound (including + * the trailing NUL) in r2. On success, it returns the string length + * (not including the trailing NUL), or -EFAULT on failure. + */ +STD_ENTRY(strncpy_from_user_asm) + { beqz r2, 2f; move r3, r0 } +1: { ld1u r4, r1; addi r1, r1, 1; addi r2, r2, -1 } + { st1 r0, r4; addi r0, r0, 1 } + beqz r2, 2f + bnezt r4, 1b + addi r0, r0, -1 /* don't count the trailing NUL */ +2: { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strncpy_from_user_asm) + .pushsection .fixup,"ax" +strncpy_from_user_fault: + { movei r0, -EFAULT; jrp lr } + ENDPROC(strncpy_from_user_fault) + .section __ex_table,"a" + .quad 1b, strncpy_from_user_fault + .popsection + +/* + * clear_user_asm takes the user target address in r0 and the + * number of bytes to zero in r1. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + * Note that we don't use a separate .fixup section here since we fall + * through into the "fixup" code as the last straight-line bundle anyway. + */ +STD_ENTRY(clear_user_asm) + { beqz r1, 2f; or r2, r0, r1 } + andi r2, r2, 7 + beqzt r2, .Lclear_aligned_user_asm +1: { st1 r0, zero; addi r0, r0, 1; addi r1, r1, -1 } + bnezt r1, 1b +2: { move r0, r1; jrp lr } + .pushsection __ex_table,"a" + .quad 1b, 2b + .popsection + +.Lclear_aligned_user_asm: +1: { st r0, zero; addi r0, r0, 8; addi r1, r1, -8 } + bnezt r1, 1b +2: { move r0, r1; jrp lr } + STD_ENDPROC(clear_user_asm) + .pushsection __ex_table,"a" + .quad 1b, 2b + .popsection + +/* + * flush_user_asm takes the user target address in r0 and the + * number of bytes to flush in r1. + * It returns the number of unflushable bytes (hopefully zero) in r0. + */ +STD_ENTRY(flush_user_asm) + beqz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() } + { addi r0, r0, CHIP_FLUSH_STRIDE(); bnezt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(flush_user_asm) + .pushsection __ex_table,"a" + .quad 1b, 2b + .popsection + +/* + * inv_user_asm takes the user target address in r0 and the + * number of bytes to invalidate in r1. + * It returns the number of not inv'able bytes (hopefully zero) in r0. + */ +STD_ENTRY(inv_user_asm) + beqz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() } + { addi r0, r0, CHIP_INV_STRIDE(); bnezt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(inv_user_asm) + .pushsection __ex_table,"a" + .quad 1b, 2b + .popsection + +/* + * finv_user_asm takes the user target address in r0 and the + * number of bytes to flush-invalidate in r1. + * It returns the number of not finv'able bytes (hopefully zero) in r0. + */ +STD_ENTRY(finv_user_asm) + beqz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() } + { addi r0, r0, CHIP_FINV_STRIDE(); bnezt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(finv_user_asm) + .pushsection __ex_table,"a" + .quad 1b, 2b + .popsection diff --git a/arch/tile/mm/fault.c b/arch/tile/mm/fault.c index 51f8663bf074..25b7b90fd620 100644 --- a/arch/tile/mm/fault.c +++ b/arch/tile/mm/fault.c @@ -43,8 +43,11 @@ #include <arch/interrupts.h> -static noinline void force_sig_info_fault(int si_signo, int si_code, - unsigned long address, int fault_num, struct task_struct *tsk) +static noinline void force_sig_info_fault(const char *type, int si_signo, + int si_code, unsigned long address, + int fault_num, + struct task_struct *tsk, + struct pt_regs *regs) { siginfo_t info; @@ -59,6 +62,7 @@ static noinline void force_sig_info_fault(int si_signo, int si_code, info.si_code = si_code; info.si_addr = (void __user *)address; info.si_trapno = fault_num; + trace_unhandled_signal(type, regs, address, si_signo); force_sig_info(si_signo, &info, tsk); } @@ -71,11 +75,12 @@ SYSCALL_DEFINE2(cmpxchg_badaddr, unsigned long, address, struct pt_regs *, regs) { if (address >= PAGE_OFFSET) - force_sig_info_fault(SIGSEGV, SEGV_MAPERR, address, - INT_DTLB_MISS, current); + force_sig_info_fault("atomic segfault", SIGSEGV, SEGV_MAPERR, + address, INT_DTLB_MISS, current, regs); else - force_sig_info_fault(SIGBUS, BUS_ADRALN, address, - INT_UNALIGN_DATA, current); + force_sig_info_fault("atomic alignment fault", SIGBUS, + BUS_ADRALN, address, + INT_UNALIGN_DATA, current, regs); /* * Adjust pc to point at the actual instruction, which is unusual @@ -471,8 +476,8 @@ bad_area_nosemaphore: */ local_irq_enable(); - force_sig_info_fault(SIGSEGV, si_code, address, - fault_num, tsk); + force_sig_info_fault("segfault", SIGSEGV, si_code, address, + fault_num, tsk, regs); return 0; } @@ -547,7 +552,8 @@ do_sigbus: if (is_kernel_mode) goto no_context; - force_sig_info_fault(SIGBUS, BUS_ADRERR, address, fault_num, tsk); + force_sig_info_fault("bus error", SIGBUS, BUS_ADRERR, address, + fault_num, tsk, regs); return 0; } @@ -732,6 +738,7 @@ void do_page_fault(struct pt_regs *regs, int fault_num, panic("Bad fault number %d in do_page_fault", fault_num); } +#if CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() if (EX1_PL(regs->ex1) != USER_PL) { struct async_tlb *async; switch (fault_num) { @@ -775,6 +782,7 @@ void do_page_fault(struct pt_regs *regs, int fault_num, return; } } +#endif handle_page_fault(regs, fault_num, is_page_fault, address, write); } @@ -801,8 +809,6 @@ static void handle_async_page_fault(struct pt_regs *regs, async->address, async->is_write); } } -#endif /* CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() */ - /* * This routine effectively re-issues asynchronous page faults @@ -824,6 +830,8 @@ void do_async_page_fault(struct pt_regs *regs) handle_async_page_fault(regs, ¤t->thread.sn_async_tlb); #endif } +#endif /* CHIP_HAS_TILE_DMA() || CHIP_HAS_SN_PROC() */ + void vmalloc_sync_all(void) { diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index d6e87fda2fb2..4e10c4023028 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -60,8 +60,6 @@ unsigned long VMALLOC_RESERVE = CONFIG_VMALLOC_RESERVE; EXPORT_SYMBOL(VMALLOC_RESERVE); #endif -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* Create an L2 page table */ static pte_t * __init alloc_pte(void) { diff --git a/arch/tile/mm/migrate_64.S b/arch/tile/mm/migrate_64.S new file mode 100644 index 000000000000..e76fea688beb --- /dev/null +++ b/arch/tile/mm/migrate_64.S @@ -0,0 +1,187 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * This routine is a helper for migrating the home of a set of pages to + * a new cpu. See the documentation in homecache.c for more information. + */ + +#include <linux/linkage.h> +#include <linux/threads.h> +#include <asm/page.h> +#include <asm/thread_info.h> +#include <asm/types.h> +#include <asm/asm-offsets.h> +#include <hv/hypervisor.h> + + .text + +/* + * First, some definitions that apply to all the code in the file. + */ + +/* Locals (caller-save) */ +#define r_tmp r10 +#define r_save_sp r11 + +/* What we save where in the stack frame; must include all callee-saves. */ +#define FRAME_SP 8 +#define FRAME_R30 16 +#define FRAME_R31 24 +#define FRAME_R32 32 +#define FRAME_R33 40 +#define FRAME_SIZE 48 + + + + +/* + * On entry: + * + * r0 the new context PA to install (moved to r_context) + * r1 PTE to use for context access (moved to r_access) + * r2 ASID to use for new context (moved to r_asid) + * r3 pointer to cpumask with just this cpu set in it (r_my_cpumask) + */ + +/* Arguments (caller-save) */ +#define r_context_in r0 +#define r_access_in r1 +#define r_asid_in r2 +#define r_my_cpumask r3 + +/* Locals (callee-save); must not be more than FRAME_xxx above. */ +#define r_save_ics r30 +#define r_context r31 +#define r_access r32 +#define r_asid r33 + +/* + * Caller-save locals and frame constants are the same as + * for homecache_migrate_stack_and_flush. + */ + +STD_ENTRY(flush_and_install_context) + /* + * Create a stack frame; we can't touch it once we flush the + * cache until we install the new page table and flush the TLB. + */ + { + move r_save_sp, sp + st sp, lr + addi sp, sp, -FRAME_SIZE + } + addi r_tmp, sp, FRAME_SP + { + st r_tmp, r_save_sp + addi r_tmp, sp, FRAME_R30 + } + { + st r_tmp, r30 + addi r_tmp, sp, FRAME_R31 + } + { + st r_tmp, r31 + addi r_tmp, sp, FRAME_R32 + } + { + st r_tmp, r32 + addi r_tmp, sp, FRAME_R33 + } + st r_tmp, r33 + + /* Move some arguments to callee-save registers. */ + { + move r_context, r_context_in + move r_access, r_access_in + } + move r_asid, r_asid_in + + /* Disable interrupts, since we can't use our stack. */ + { + mfspr r_save_ics, INTERRUPT_CRITICAL_SECTION + movei r_tmp, 1 + } + mtspr INTERRUPT_CRITICAL_SECTION, r_tmp + + /* First, flush our L2 cache. */ + { + move r0, zero /* cache_pa */ + moveli r1, hw2_last(HV_FLUSH_EVICT_L2) /* cache_control */ + } + { + shl16insli r1, r1, hw1(HV_FLUSH_EVICT_L2) + move r2, r_my_cpumask /* cache_cpumask */ + } + { + shl16insli r1, r1, hw0(HV_FLUSH_EVICT_L2) + move r3, zero /* tlb_va */ + } + { + move r4, zero /* tlb_length */ + move r5, zero /* tlb_pgsize */ + } + { + move r6, zero /* tlb_cpumask */ + move r7, zero /* asids */ + } + { + move r8, zero /* asidcount */ + jal hv_flush_remote + } + bnez r0, 1f + + /* Now install the new page table. */ + { + move r0, r_context + move r1, r_access + } + { + move r2, r_asid + movei r3, HV_CTX_DIRECTIO + } + jal hv_install_context + bnez r0, 1f + + /* Finally, flush the TLB. */ + { + movei r0, 0 /* preserve_global */ + jal hv_flush_all + } + +1: /* Reset interrupts back how they were before. */ + mtspr INTERRUPT_CRITICAL_SECTION, r_save_ics + + /* Restore the callee-saved registers and return. */ + addli lr, sp, FRAME_SIZE + { + ld lr, lr + addli r_tmp, sp, FRAME_R30 + } + { + ld r30, r_tmp + addli r_tmp, sp, FRAME_R31 + } + { + ld r31, r_tmp + addli r_tmp, sp, FRAME_R32 + } + { + ld r32, r_tmp + addli r_tmp, sp, FRAME_R33 + } + { + ld r33, r_tmp + addi sp, sp, FRAME_SIZE + } + jrp lr + STD_ENDPROC(flush_and_install_context) diff --git a/arch/um/Kconfig.debug b/arch/um/Kconfig.debug index 8fce5e536b0f..68205fd3b08c 100644 --- a/arch/um/Kconfig.debug +++ b/arch/um/Kconfig.debug @@ -28,13 +28,13 @@ config GCOV If you're involved in UML kernel development and want to use gcov, say Y. If you're unsure, say N. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - default N - help - Track the maximum kernel stack usage - this will look at each - kernel stack at process exit and log it if it's the deepest - stack seen so far. +config EARLY_PRINTK + bool "Early printk" + default y + ---help--- + Write kernel log output directly to stdout. + + This is useful for kernel debugging when your machine crashes very + early before the console code is initialized. - This option will slow down process creation and destruction somewhat. endmenu diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index a9da516a5274..795ea8e869f4 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -29,10 +29,10 @@ config X86_64 def_bool 64BIT config RWSEM_XCHGADD_ALGORITHM - def_bool X86_XADD + def_bool X86_XADD && 64BIT config RWSEM_GENERIC_SPINLOCK - def_bool !X86_XADD + def_bool !RWSEM_XCHGADD_ALGORITHM config 3_LEVEL_PGTABLES bool "Three-level pagetables (EXPERIMENTAL)" if !64BIT diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 1d9b6ae967b0..e7582e1d248c 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -9,7 +9,7 @@ slip-objs := slip_kern.o slip_user.o slirp-objs := slirp_kern.o slirp_user.o daemon-objs := daemon_kern.o daemon_user.o -mcast-objs := mcast_kern.o mcast_user.o +umcast-objs := umcast_kern.o umcast_user.o net-objs := net_kern.o net_user.o mconsole-objs := mconsole_kern.o mconsole_user.o hostaudio-objs := hostaudio_kern.o @@ -44,7 +44,7 @@ obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o obj-$(CONFIG_UML_NET_DAEMON) += daemon.o obj-$(CONFIG_UML_NET_VDE) += vde.o -obj-$(CONFIG_UML_NET_MCAST) += mcast.o +obj-$(CONFIG_UML_NET_MCAST) += umcast.o obj-$(CONFIG_UML_NET_PCAP) += pcap.o obj-$(CONFIG_UML_NET) += net.o obj-$(CONFIG_MCONSOLE) += mconsole.o diff --git a/arch/um/drivers/mcast.h b/arch/um/drivers/mcast.h deleted file mode 100644 index 6fa282e896be..000000000000 --- a/arch/um/drivers/mcast.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) - * Licensed under the GPL - */ - -#ifndef __DRIVERS_MCAST_H -#define __DRIVERS_MCAST_H - -#include "net_user.h" - -struct mcast_data { - char *addr; - unsigned short port; - void *mcast_addr; - int ttl; - void *dev; -}; - -extern const struct net_user_info mcast_user_info; - -extern int mcast_user_write(int fd, void *buf, int len, - struct mcast_data *pri); - -#endif diff --git a/arch/um/drivers/mcast_kern.c b/arch/um/drivers/mcast_kern.c deleted file mode 100644 index ffc6416d5ed7..000000000000 --- a/arch/um/drivers/mcast_kern.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * user-mode-linux networking multicast transport - * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org> - * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) - * - * based on the existing uml-networking code, which is - * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and - * James Leu (jleu@mindspring.net). - * Copyright (C) 2001 by various other people who didn't put their name here. - * - * Licensed under the GPL. - */ - -#include "linux/init.h" -#include <linux/netdevice.h> -#include "mcast.h" -#include "net_kern.h" - -struct mcast_init { - char *addr; - int port; - int ttl; -}; - -static void mcast_init(struct net_device *dev, void *data) -{ - struct uml_net_private *pri; - struct mcast_data *dpri; - struct mcast_init *init = data; - - pri = netdev_priv(dev); - dpri = (struct mcast_data *) pri->user; - dpri->addr = init->addr; - dpri->port = init->port; - dpri->ttl = init->ttl; - dpri->dev = dev; - - printk("mcast backend multicast address: %s:%u, TTL:%u\n", - dpri->addr, dpri->port, dpri->ttl); -} - -static int mcast_read(int fd, struct sk_buff *skb, struct uml_net_private *lp) -{ - return net_recvfrom(fd, skb_mac_header(skb), - skb->dev->mtu + ETH_HEADER_OTHER); -} - -static int mcast_write(int fd, struct sk_buff *skb, struct uml_net_private *lp) -{ - return mcast_user_write(fd, skb->data, skb->len, - (struct mcast_data *) &lp->user); -} - -static const struct net_kern_info mcast_kern_info = { - .init = mcast_init, - .protocol = eth_protocol, - .read = mcast_read, - .write = mcast_write, -}; - -static int mcast_setup(char *str, char **mac_out, void *data) -{ - struct mcast_init *init = data; - char *port_str = NULL, *ttl_str = NULL, *remain; - char *last; - - *init = ((struct mcast_init) - { .addr = "239.192.168.1", - .port = 1102, - .ttl = 1 }); - - remain = split_if_spec(str, mac_out, &init->addr, &port_str, &ttl_str, - NULL); - if (remain != NULL) { - printk(KERN_ERR "mcast_setup - Extra garbage on " - "specification : '%s'\n", remain); - return 0; - } - - if (port_str != NULL) { - init->port = simple_strtoul(port_str, &last, 10); - if ((*last != '\0') || (last == port_str)) { - printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", - port_str); - return 0; - } - } - - if (ttl_str != NULL) { - init->ttl = simple_strtoul(ttl_str, &last, 10); - if ((*last != '\0') || (last == ttl_str)) { - printk(KERN_ERR "mcast_setup - Bad ttl : '%s'\n", - ttl_str); - return 0; - } - } - - printk(KERN_INFO "Configured mcast device: %s:%u-%u\n", init->addr, - init->port, init->ttl); - - return 1; -} - -static struct transport mcast_transport = { - .list = LIST_HEAD_INIT(mcast_transport.list), - .name = "mcast", - .setup = mcast_setup, - .user = &mcast_user_info, - .kern = &mcast_kern_info, - .private_size = sizeof(struct mcast_data), - .setup_size = sizeof(struct mcast_init), -}; - -static int register_mcast(void) -{ - register_transport(&mcast_transport); - return 0; -} - -late_initcall(register_mcast); diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c deleted file mode 100644 index ee19e91568a2..000000000000 --- a/arch/um/drivers/mcast_user.c +++ /dev/null @@ -1,165 +0,0 @@ -/* - * user-mode-linux networking multicast transport - * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) - * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org> - * - * based on the existing uml-networking code, which is - * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and - * James Leu (jleu@mindspring.net). - * Copyright (C) 2001 by various other people who didn't put their name here. - * - * Licensed under the GPL. - * - */ - -#include <unistd.h> -#include <errno.h> -#include <netinet/in.h> -#include "kern_constants.h" -#include "mcast.h" -#include "net_user.h" -#include "um_malloc.h" -#include "user.h" - -static struct sockaddr_in *new_addr(char *addr, unsigned short port) -{ - struct sockaddr_in *sin; - - sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL); - if (sin == NULL) { - printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in " - "failed\n"); - return NULL; - } - sin->sin_family = AF_INET; - sin->sin_addr.s_addr = in_aton(addr); - sin->sin_port = htons(port); - return sin; -} - -static int mcast_user_init(void *data, void *dev) -{ - struct mcast_data *pri = data; - - pri->mcast_addr = new_addr(pri->addr, pri->port); - pri->dev = dev; - return 0; -} - -static void mcast_remove(void *data) -{ - struct mcast_data *pri = data; - - kfree(pri->mcast_addr); - pri->mcast_addr = NULL; -} - -static int mcast_open(void *data) -{ - struct mcast_data *pri = data; - struct sockaddr_in *sin = pri->mcast_addr; - struct ip_mreq mreq; - int fd, yes = 1, err = -EINVAL; - - - if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) - goto out; - - fd = socket(AF_INET, SOCK_DGRAM, 0); - - if (fd < 0) { - err = -errno; - printk(UM_KERN_ERR "mcast_open : data socket failed, " - "errno = %d\n", errno); - goto out; - } - - if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { - err = -errno; - printk(UM_KERN_ERR "mcast_open: SO_REUSEADDR failed, " - "errno = %d\n", errno); - goto out_close; - } - - /* set ttl according to config */ - if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl, - sizeof(pri->ttl)) < 0) { - err = -errno; - printk(UM_KERN_ERR "mcast_open: IP_MULTICAST_TTL failed, " - "error = %d\n", errno); - goto out_close; - } - - /* set LOOP, so data does get fed back to local sockets */ - if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) { - err = -errno; - printk(UM_KERN_ERR "mcast_open: IP_MULTICAST_LOOP failed, " - "error = %d\n", errno); - goto out_close; - } - - /* bind socket to mcast address */ - if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) { - err = -errno; - printk(UM_KERN_ERR "mcast_open : data bind failed, " - "errno = %d\n", errno); - goto out_close; - } - - /* subscribe to the multicast group */ - mreq.imr_multiaddr.s_addr = sin->sin_addr.s_addr; - mreq.imr_interface.s_addr = 0; - if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, - &mreq, sizeof(mreq)) < 0) { - err = -errno; - printk(UM_KERN_ERR "mcast_open: IP_ADD_MEMBERSHIP failed, " - "error = %d\n", errno); - printk(UM_KERN_ERR "There appears not to be a multicast-" - "capable network interface on the host.\n"); - printk(UM_KERN_ERR "eth0 should be configured in order to use " - "the multicast transport.\n"); - goto out_close; - } - - return fd; - - out_close: - close(fd); - out: - return err; -} - -static void mcast_close(int fd, void *data) -{ - struct ip_mreq mreq; - struct mcast_data *pri = data; - struct sockaddr_in *sin = pri->mcast_addr; - - mreq.imr_multiaddr.s_addr = sin->sin_addr.s_addr; - mreq.imr_interface.s_addr = 0; - if (setsockopt(fd, SOL_IP, IP_DROP_MEMBERSHIP, - &mreq, sizeof(mreq)) < 0) { - printk(UM_KERN_ERR "mcast_open: IP_DROP_MEMBERSHIP failed, " - "error = %d\n", errno); - } - - close(fd); -} - -int mcast_user_write(int fd, void *buf, int len, struct mcast_data *pri) -{ - struct sockaddr_in *data_addr = pri->mcast_addr; - - return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr)); -} - -const struct net_user_info mcast_user_info = { - .init = mcast_user_init, - .open = mcast_open, - .close = mcast_close, - .remove = mcast_remove, - .add_address = NULL, - .delete_address = NULL, - .mtu = ETH_MAX_PACKET, - .max_packet = ETH_MAX_PACKET + ETH_HEADER_OTHER, -}; diff --git a/arch/um/drivers/umcast.h b/arch/um/drivers/umcast.h new file mode 100644 index 000000000000..6f8c0fe890fb --- /dev/null +++ b/arch/um/drivers/umcast.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + * Licensed under the GPL + */ + +#ifndef __DRIVERS_UMCAST_H +#define __DRIVERS_UMCAST_H + +#include "net_user.h" + +struct umcast_data { + char *addr; + unsigned short lport; + unsigned short rport; + void *listen_addr; + void *remote_addr; + int ttl; + int unicast; + void *dev; +}; + +extern const struct net_user_info umcast_user_info; + +extern int umcast_user_write(int fd, void *buf, int len, + struct umcast_data *pri); + +#endif diff --git a/arch/um/drivers/umcast_kern.c b/arch/um/drivers/umcast_kern.c new file mode 100644 index 000000000000..42dab11d2ecf --- /dev/null +++ b/arch/um/drivers/umcast_kern.c @@ -0,0 +1,188 @@ +/* + * user-mode-linux networking multicast transport + * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org> + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + * + * based on the existing uml-networking code, which is + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * + * Licensed under the GPL. + */ + +#include "linux/init.h" +#include <linux/netdevice.h> +#include "umcast.h" +#include "net_kern.h" + +struct umcast_init { + char *addr; + int lport; + int rport; + int ttl; + bool unicast; +}; + +static void umcast_init(struct net_device *dev, void *data) +{ + struct uml_net_private *pri; + struct umcast_data *dpri; + struct umcast_init *init = data; + + pri = netdev_priv(dev); + dpri = (struct umcast_data *) pri->user; + dpri->addr = init->addr; + dpri->lport = init->lport; + dpri->rport = init->rport; + dpri->unicast = init->unicast; + dpri->ttl = init->ttl; + dpri->dev = dev; + + if (dpri->unicast) { + printk(KERN_INFO "ucast backend address: %s:%u listen port: " + "%u\n", dpri->addr, dpri->rport, dpri->lport); + } else { + printk(KERN_INFO "mcast backend multicast address: %s:%u, " + "TTL:%u\n", dpri->addr, dpri->lport, dpri->ttl); + } +} + +static int umcast_read(int fd, struct sk_buff *skb, struct uml_net_private *lp) +{ + return net_recvfrom(fd, skb_mac_header(skb), + skb->dev->mtu + ETH_HEADER_OTHER); +} + +static int umcast_write(int fd, struct sk_buff *skb, struct uml_net_private *lp) +{ + return umcast_user_write(fd, skb->data, skb->len, + (struct umcast_data *) &lp->user); +} + +static const struct net_kern_info umcast_kern_info = { + .init = umcast_init, + .protocol = eth_protocol, + .read = umcast_read, + .write = umcast_write, +}; + +static int mcast_setup(char *str, char **mac_out, void *data) +{ + struct umcast_init *init = data; + char *port_str = NULL, *ttl_str = NULL, *remain; + char *last; + + *init = ((struct umcast_init) + { .addr = "239.192.168.1", + .lport = 1102, + .ttl = 1 }); + + remain = split_if_spec(str, mac_out, &init->addr, &port_str, &ttl_str, + NULL); + if (remain != NULL) { + printk(KERN_ERR "mcast_setup - Extra garbage on " + "specification : '%s'\n", remain); + return 0; + } + + if (port_str != NULL) { + init->lport = simple_strtoul(port_str, &last, 10); + if ((*last != '\0') || (last == port_str)) { + printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", + port_str); + return 0; + } + } + + if (ttl_str != NULL) { + init->ttl = simple_strtoul(ttl_str, &last, 10); + if ((*last != '\0') || (last == ttl_str)) { + printk(KERN_ERR "mcast_setup - Bad ttl : '%s'\n", + ttl_str); + return 0; + } + } + + init->unicast = false; + init->rport = init->lport; + + printk(KERN_INFO "Configured mcast device: %s:%u-%u\n", init->addr, + init->lport, init->ttl); + + return 1; +} + +static int ucast_setup(char *str, char **mac_out, void *data) +{ + struct umcast_init *init = data; + char *lport_str = NULL, *rport_str = NULL, *remain; + char *last; + + *init = ((struct umcast_init) + { .addr = "", + .lport = 1102, + .rport = 1102 }); + + remain = split_if_spec(str, mac_out, &init->addr, + &lport_str, &rport_str, NULL); + if (remain != NULL) { + printk(KERN_ERR "ucast_setup - Extra garbage on " + "specification : '%s'\n", remain); + return 0; + } + + if (lport_str != NULL) { + init->lport = simple_strtoul(lport_str, &last, 10); + if ((*last != '\0') || (last == lport_str)) { + printk(KERN_ERR "ucast_setup - Bad listen port : " + "'%s'\n", lport_str); + return 0; + } + } + + if (rport_str != NULL) { + init->rport = simple_strtoul(rport_str, &last, 10); + if ((*last != '\0') || (last == rport_str)) { + printk(KERN_ERR "ucast_setup - Bad remote port : " + "'%s'\n", rport_str); + return 0; + } + } + + init->unicast = true; + + printk(KERN_INFO "Configured ucast device: :%u -> %s:%u\n", + init->lport, init->addr, init->rport); + + return 1; +} + +static struct transport mcast_transport = { + .list = LIST_HEAD_INIT(mcast_transport.list), + .name = "mcast", + .setup = mcast_setup, + .user = &umcast_user_info, + .kern = &umcast_kern_info, + .private_size = sizeof(struct umcast_data), + .setup_size = sizeof(struct umcast_init), +}; + +static struct transport ucast_transport = { + .list = LIST_HEAD_INIT(ucast_transport.list), + .name = "ucast", + .setup = ucast_setup, + .user = &umcast_user_info, + .kern = &umcast_kern_info, + .private_size = sizeof(struct umcast_data), + .setup_size = sizeof(struct umcast_init), +}; + +static int register_umcast(void) +{ + register_transport(&mcast_transport); + register_transport(&ucast_transport); + return 0; +} + +late_initcall(register_umcast); diff --git a/arch/um/drivers/umcast_user.c b/arch/um/drivers/umcast_user.c new file mode 100644 index 000000000000..59c56fd6f52a --- /dev/null +++ b/arch/um/drivers/umcast_user.c @@ -0,0 +1,186 @@ +/* + * user-mode-linux networking multicast transport + * Copyright (C) 2001 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com) + * Copyright (C) 2001 by Harald Welte <laforge@gnumonks.org> + * + * based on the existing uml-networking code, which is + * Copyright (C) 2001 Lennert Buytenhek (buytenh@gnu.org) and + * James Leu (jleu@mindspring.net). + * Copyright (C) 2001 by various other people who didn't put their name here. + * + * Licensed under the GPL. + * + */ + +#include <unistd.h> +#include <errno.h> +#include <netinet/in.h> +#include "kern_constants.h" +#include "umcast.h" +#include "net_user.h" +#include "um_malloc.h" +#include "user.h" + +static struct sockaddr_in *new_addr(char *addr, unsigned short port) +{ + struct sockaddr_in *sin; + + sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL); + if (sin == NULL) { + printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in " + "failed\n"); + return NULL; + } + sin->sin_family = AF_INET; + if (addr) + sin->sin_addr.s_addr = in_aton(addr); + else + sin->sin_addr.s_addr = INADDR_ANY; + sin->sin_port = htons(port); + return sin; +} + +static int umcast_user_init(void *data, void *dev) +{ + struct umcast_data *pri = data; + + pri->remote_addr = new_addr(pri->addr, pri->rport); + if (pri->unicast) + pri->listen_addr = new_addr(NULL, pri->lport); + else + pri->listen_addr = pri->remote_addr; + pri->dev = dev; + return 0; +} + +static void umcast_remove(void *data) +{ + struct umcast_data *pri = data; + + kfree(pri->listen_addr); + if (pri->unicast) + kfree(pri->remote_addr); + pri->listen_addr = pri->remote_addr = NULL; +} + +static int umcast_open(void *data) +{ + struct umcast_data *pri = data; + struct sockaddr_in *lsin = pri->listen_addr; + struct sockaddr_in *rsin = pri->remote_addr; + struct ip_mreq mreq; + int fd, yes = 1, err = -EINVAL; + + + if ((!pri->unicast && lsin->sin_addr.s_addr == 0) || + (rsin->sin_addr.s_addr == 0) || + (lsin->sin_port == 0) || (rsin->sin_port == 0)) + goto out; + + fd = socket(AF_INET, SOCK_DGRAM, 0); + + if (fd < 0) { + err = -errno; + printk(UM_KERN_ERR "umcast_open : data socket failed, " + "errno = %d\n", errno); + goto out; + } + + if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) { + err = -errno; + printk(UM_KERN_ERR "umcast_open: SO_REUSEADDR failed, " + "errno = %d\n", errno); + goto out_close; + } + + if (!pri->unicast) { + /* set ttl according to config */ + if (setsockopt(fd, SOL_IP, IP_MULTICAST_TTL, &pri->ttl, + sizeof(pri->ttl)) < 0) { + err = -errno; + printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_TTL " + "failed, error = %d\n", errno); + goto out_close; + } + + /* set LOOP, so data does get fed back to local sockets */ + if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, + &yes, sizeof(yes)) < 0) { + err = -errno; + printk(UM_KERN_ERR "umcast_open: IP_MULTICAST_LOOP " + "failed, error = %d\n", errno); + goto out_close; + } + } + + /* bind socket to the address */ + if (bind(fd, (struct sockaddr *) lsin, sizeof(*lsin)) < 0) { + err = -errno; + printk(UM_KERN_ERR "umcast_open : data bind failed, " + "errno = %d\n", errno); + goto out_close; + } + + if (!pri->unicast) { + /* subscribe to the multicast group */ + mreq.imr_multiaddr.s_addr = lsin->sin_addr.s_addr; + mreq.imr_interface.s_addr = 0; + if (setsockopt(fd, SOL_IP, IP_ADD_MEMBERSHIP, + &mreq, sizeof(mreq)) < 0) { + err = -errno; + printk(UM_KERN_ERR "umcast_open: IP_ADD_MEMBERSHIP " + "failed, error = %d\n", errno); + printk(UM_KERN_ERR "There appears not to be a " + "multicast-capable network interface on the " + "host.\n"); + printk(UM_KERN_ERR "eth0 should be configured in order " + "to use the multicast transport.\n"); + goto out_close; + } + } + + return fd; + + out_close: + close(fd); + out: + return err; +} + +static void umcast_close(int fd, void *data) +{ + struct umcast_data *pri = data; + + if (!pri->unicast) { + struct ip_mreq mreq; + struct sockaddr_in *lsin = pri->listen_addr; + + mreq.imr_multiaddr.s_addr = lsin->sin_addr.s_addr; + mreq.imr_interface.s_addr = 0; + if (setsockopt(fd, SOL_IP, IP_DROP_MEMBERSHIP, + &mreq, sizeof(mreq)) < 0) { + printk(UM_KERN_ERR "umcast_close: IP_DROP_MEMBERSHIP " + "failed, error = %d\n", errno); + } + } + + close(fd); +} + +int umcast_user_write(int fd, void *buf, int len, struct umcast_data *pri) +{ + struct sockaddr_in *data_addr = pri->remote_addr; + + return net_sendto(fd, buf, len, data_addr, sizeof(*data_addr)); +} + +const struct net_user_info umcast_user_info = { + .init = umcast_user_init, + .open = umcast_open, + .close = umcast_close, + .remove = umcast_remove, + .add_address = NULL, + .delete_address = NULL, + .mtu = ETH_MAX_PACKET, + .max_packet = ETH_MAX_PACKET + ETH_HEADER_OTHER, +}; diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index da2caa5a21ef..8ac7146c237f 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -90,7 +90,7 @@ static int xterm_open(int input, int output, int primary, void *d, int pid, fd, new, err; char title[256], file[] = "/tmp/xterm-pipeXXXXXX"; char *argv[] = { terminal_emulator, title_switch, title, exec_switch, - "/usr/lib/uml/port-helper", "-uml-socket", + OS_LIB_PATH "/uml/port-helper", "-uml-socket", file, NULL }; if (access(argv[4], X_OK) < 0) diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S index 34bede8aad4a..4938de5512d2 100644 --- a/arch/um/include/asm/common.lds.S +++ b/arch/um/include/asm/common.lds.S @@ -42,7 +42,7 @@ INIT_SETUP(0) } - PERCPU(32, 32) + PERCPU_SECTION(32) .initcall.init : { INIT_CALLS diff --git a/arch/um/include/asm/processor-generic.h b/arch/um/include/asm/processor-generic.h index d1d1b0d8a0cd..98d01bc4fa92 100644 --- a/arch/um/include/asm/processor-generic.h +++ b/arch/um/include/asm/processor-generic.h @@ -14,6 +14,8 @@ struct task_struct; #include "registers.h" #include "sysdep/archsetjmp.h" +#include <linux/prefetch.h> + struct mm_struct; struct thread_struct { diff --git a/arch/um/include/asm/smp.h b/arch/um/include/asm/smp.h index f27a96313174..4a4b09d4f366 100644 --- a/arch/um/include/asm/smp.h +++ b/arch/um/include/asm/smp.h @@ -11,7 +11,6 @@ #define cpu_logical_map(n) (n) #define cpu_number_map(n) (n) -#define PROC_CHANGE_PENALTY 15 /* Pick a number, any number */ extern int hard_smp_processor_id(void); #define NO_PROC_ID -1 diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h index 660caedac9eb..4febacd1a8a1 100644 --- a/arch/um/include/asm/tlb.h +++ b/arch/um/include/asm/tlb.h @@ -22,9 +22,6 @@ struct mmu_gather { unsigned int fullmm; /* non-zero means full mm flush */ }; -/* Users of the generic TLB shootdown code must declare this storage space. */ -DECLARE_PER_CPU(struct mmu_gather, mmu_gathers); - static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long address) { @@ -47,27 +44,20 @@ static inline void init_tlb_gather(struct mmu_gather *tlb) } } -/* tlb_gather_mmu - * Return a pointer to an initialized struct mmu_gather. - */ -static inline struct mmu_gather * -tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +static inline void +tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_mm_flush) { - struct mmu_gather *tlb = &get_cpu_var(mmu_gathers); - tlb->mm = mm; tlb->fullmm = full_mm_flush; init_tlb_gather(tlb); - - return tlb; } extern void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, unsigned long end); static inline void -tlb_flush_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +tlb_flush_mmu(struct mmu_gather *tlb) { if (!tlb->need_flush) return; @@ -83,12 +73,10 @@ tlb_flush_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) static inline void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) { - tlb_flush_mmu(tlb, start, end); + tlb_flush_mmu(tlb); /* keep the page table cache within bounds */ check_pgt_cache(); - - put_cpu_var(mmu_gathers); } /* tlb_remove_page @@ -96,11 +84,16 @@ tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) * while handling the additional races in SMP caused by other CPUs * caching valid mappings in their TLBs. */ -static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { tlb->need_flush = 1; free_page_and_swap_cache(page); - return; + return 1; /* avoid calling tlb_flush_mmu */ +} + +static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) +{ + __tlb_remove_page(tlb, page); } /** diff --git a/arch/um/include/shared/os.h b/arch/um/include/shared/os.h index c4617baaa4f2..83c7c2ecd614 100644 --- a/arch/um/include/shared/os.h +++ b/arch/um/include/shared/os.h @@ -29,6 +29,12 @@ #define OS_ACC_R_OK 4 /* Test for read permission. */ #define OS_ACC_RW_OK (OS_ACC_W_OK | OS_ACC_R_OK) /* Test for RW permission */ +#ifdef CONFIG_64BIT +#define OS_LIB_PATH "/usr/lib64/" +#else +#define OS_LIB_PATH "/usr/lib/" +#endif + /* * types taken from stat_file() in hostfs_user.c * (if they are wrong here, they are wrong there...). @@ -238,6 +244,7 @@ extern int raw(int fd); extern void setup_machinename(char *machine_out); extern void setup_hostinfo(char *buf, int len); extern void os_dump_core(void) __attribute__ ((noreturn)); +extern void um_early_printk(const char *s, unsigned int n); /* time.c */ extern void idle_sleep(unsigned long long nsecs); diff --git a/arch/um/kernel/Makefile b/arch/um/kernel/Makefile index 1119233597a1..c4491c15afb2 100644 --- a/arch/um/kernel/Makefile +++ b/arch/um/kernel/Makefile @@ -17,6 +17,7 @@ obj-y = config.o exec.o exitcode.o init_task.o irq.o ksyms.o mem.o \ obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o obj-$(CONFIG_GPROF) += gprof_syms.o obj-$(CONFIG_GCOV) += gmon_syms.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o USER_OBJS := config.o diff --git a/arch/um/kernel/early_printk.c b/arch/um/kernel/early_printk.c new file mode 100644 index 000000000000..ec649bf72f68 --- /dev/null +++ b/arch/um/kernel/early_printk.c @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011 Richard Weinberger <richrd@nod.at> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/console.h> +#include <linux/init.h> +#include "os.h" + +static void early_console_write(struct console *con, const char *s, unsigned int n) +{ + um_early_printk(s, n); +} + +static struct console early_console = { + .name = "earlycon", + .write = early_console_write, + .flags = CON_BOOT, + .index = -1, +}; + +static int __init setup_early_printk(char *buf) +{ + register_console(&early_console); + + return 0; +} + +early_param("earlyprintk", setup_early_printk); diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c index eefb107d2d73..155206a66908 100644 --- a/arch/um/kernel/smp.c +++ b/arch/um/kernel/smp.c @@ -7,9 +7,6 @@ #include "asm/pgalloc.h" #include "asm/tlb.h" -/* For some reason, mmu_gathers are referenced when CONFIG_SMP is off. */ -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - #ifdef CONFIG_SMP #include "linux/sched.h" diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c index 637c6505dc00..8c7b8823d1f0 100644 --- a/arch/um/kernel/trap.c +++ b/arch/um/kernel/trap.c @@ -113,6 +113,27 @@ out_of_memory: return 0; } +static void show_segv_info(struct uml_pt_regs *regs) +{ + struct task_struct *tsk = current; + struct faultinfo *fi = UPT_FAULTINFO(regs); + + if (!unhandled_signal(tsk, SIGSEGV)) + return; + + if (!printk_ratelimit()) + return; + + printk("%s%s[%d]: segfault at %lx ip %p sp %p error %x", + task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, + tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi), + (void *)UPT_IP(regs), (void *)UPT_SP(regs), + fi->error_code); + + print_vma_addr(KERN_CONT " in ", UPT_IP(regs)); + printk(KERN_CONT "\n"); +} + static void bad_segv(struct faultinfo fi, unsigned long ip) { struct siginfo si; @@ -141,6 +162,7 @@ void segv_handler(int sig, struct uml_pt_regs *regs) struct faultinfo * fi = UPT_FAULTINFO(regs); if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) { + show_segv_info(regs); bad_segv(*fi, UPT_IP(regs)); return; } @@ -202,6 +224,8 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, address, ip); } + show_segv_info(regs); + if (err == -EACCES) { si.si_signo = SIGBUS; si.si_errno = 0; diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index eee69b9f52c9..fb2a97a75fb1 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -78,7 +78,7 @@ static void install_fatal_handler(int sig) } } -#define UML_LIB_PATH ":/usr/lib/uml" +#define UML_LIB_PATH ":" OS_LIB_PATH "/uml" static void setup_env_path(void) { @@ -142,7 +142,6 @@ int __init main(int argc, char **argv, char **envp) */ install_fatal_handler(SIGINT); install_fatal_handler(SIGTERM); - install_fatal_handler(SIGHUP); scan_elf_aux(envp); diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index e0477c3ee894..0c45dc8efb05 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -253,6 +253,7 @@ void init_new_thread_signals(void) SA_ONSTACK | SA_RESTART, SIGUSR1, SIGIO, SIGWINCH, SIGALRM, SIGVTALRM, -1); signal(SIGWINCH, SIG_IGN); + signal(SIGTERM, SIG_DFL); } int run_kernel_thread(int (*fn)(void *), void *arg, jmp_buf **jmp_ptr) diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index 42827cafa6af..5803b1887672 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -139,3 +139,8 @@ void os_dump_core(void) uml_abort(); } + +void um_early_printk(const char *s, unsigned int n) +{ + printf("%.*s", n, s); +} diff --git a/arch/unicore32/Kconfig.debug b/arch/unicore32/Kconfig.debug index 3140151ede45..ae2ec334c3c6 100644 --- a/arch/unicore32/Kconfig.debug +++ b/arch/unicore32/Kconfig.debug @@ -27,13 +27,6 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. -config DEBUG_STACK_USAGE - bool "Enable stack utilization instrumentation" - depends on DEBUG_KERNEL - help - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T output. - # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL bool "Kernel low-level debugging functions" diff --git a/arch/unicore32/mm/init.c b/arch/unicore32/mm/init.c index 1fc02633f700..2d3e7112d2a3 100644 --- a/arch/unicore32/mm/init.c +++ b/arch/unicore32/mm/init.c @@ -62,7 +62,7 @@ void show_mem(unsigned int filter) struct meminfo *mi = &meminfo; printk(KERN_DEFAULT "Mem-info:\n"); - show_free_areas(); + show_free_areas(filter); for_each_bank(i, mi) { struct membank *bank = &mi->bank[i]; diff --git a/arch/unicore32/mm/mmu.c b/arch/unicore32/mm/mmu.c index db2d334941b4..3e5c3e5a0b45 100644 --- a/arch/unicore32/mm/mmu.c +++ b/arch/unicore32/mm/mmu.c @@ -30,8 +30,6 @@ #include "mm.h" -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - /* * empty_zero_page is a special page that is used for * zero-initialized data and COW. diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 880fcb6c86f4..483775f42d2a 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -17,8 +17,6 @@ config X86_64 config X86 def_bool y select HAVE_AOUT if X86_32 - select HAVE_READQ - select HAVE_WRITEQ select HAVE_UNSTABLE_SCHED_CLOCK select HAVE_IDE select HAVE_OPROFILE @@ -917,6 +915,7 @@ config TOSHIBA config I8K tristate "Dell laptop support" + select HWMON ---help--- This adds a driver to safely access the System Management Mode of the CPU on the Dell Inspiron 8000. The System Management Mode diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 615e18810f48..c0f8a5c88910 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -66,26 +66,6 @@ config DEBUG_STACKOVERFLOW This option will cause messages to be printed if free stack space drops below a certain limit. -config DEBUG_STACK_USAGE - bool "Stack utilization instrumentation" - depends on DEBUG_KERNEL - ---help--- - Enables the display of the minimum amount of free stack which each - task has ever had available in the sysrq-T and sysrq-P debug output. - - This option will slow down process creation somewhat. - -config DEBUG_PER_CPU_MAPS - bool "Debug access to per_cpu maps" - depends on DEBUG_KERNEL - depends on SMP - ---help--- - Say Y to verify that the per_cpu map being accessed has - been setup. Adds a fair amount of code to kernel memory - and decreases performance. - - Say N if unsure. - config X86_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index 072273082528..d02804d650c4 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -38,7 +38,6 @@ #include <linux/string.h> #include <linux/compiler.h> -#include <asm-generic/int-ll64.h> #include <asm/page.h> #include <xen/xen.h> @@ -87,27 +86,6 @@ build_mmio_write(__writel, "l", unsigned int, "r", ) build_mmio_read(readq, "q", unsigned long, "=r", :"memory") build_mmio_write(writeq, "q", unsigned long, "r", :"memory") -#else - -static inline __u64 readq(const volatile void __iomem *addr) -{ - const volatile u32 __iomem *p = addr; - u32 low, high; - - low = readl(p); - high = readl(p + 1); - - return low + ((u64)high << 32); -} - -static inline void writeq(__u64 val, volatile void __iomem *addr) -{ - writel(val, addr); - writel(val >> 32, addr+4); -} - -#endif - #define readq_relaxed(a) readq(a) #define __raw_readq(a) readq(a) @@ -117,6 +95,8 @@ static inline void writeq(__u64 val, volatile void __iomem *addr) #define readq readq #define writeq writeq +#endif + /** * virt_to_phys - map virtual addresses to physical * @address: address to remap diff --git a/arch/x86/include/asm/linkage.h b/arch/x86/include/asm/linkage.h index 12d55e773eb6..48142971b25d 100644 --- a/arch/x86/include/asm/linkage.h +++ b/arch/x86/include/asm/linkage.h @@ -8,11 +8,6 @@ #ifdef CONFIG_X86_32 #define asmlinkage CPP_ASMLINKAGE __attribute__((regparm(0))) -/* - * For 32-bit UML - mark functions implemented in assembly that use - * regparm input parameters: - */ -#define asmregparm __attribute__((regparm(3))) /* * Make sure the compiler doesn't do anything stupid with the diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index 53278b0dfdf6..a0a9779084d1 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -509,6 +509,11 @@ do { \ * it in software. The address used in the cmpxchg16 instruction must be * aligned to a 16 byte boundary. */ +#ifdef CONFIG_SMP +#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP3 +#else +#define CMPXCHG16B_EMU_CALL "call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP2 +#endif #define percpu_cmpxchg16b_double(pcp1, o1, o2, n1, n2) \ ({ \ char __ret; \ @@ -517,7 +522,7 @@ do { \ typeof(o2) __o2 = o2; \ typeof(o2) __n2 = n2; \ typeof(o2) __dummy; \ - alternative_io("call this_cpu_cmpxchg16b_emu\n\t" ASM_NOP4, \ + alternative_io(CMPXCHG16B_EMU_CALL, \ "cmpxchg16b " __percpu_prefix "(%%rsi)\n\tsetz %0\n\t", \ X86_FEATURE_CX16, \ ASM_OUTPUT2("=a"(__ret), "=d"(__dummy)), \ diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index 8508bfe52296..d240ea950519 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -447,6 +447,13 @@ HYPERVISOR_hvm_op(int op, void *arg) return _hypercall2(unsigned long, hvm_op, op, arg); } +static inline int +HYPERVISOR_tmem_op( + struct tmem_op *op) +{ + return _hypercall1(int, tmem_op, op); +} + static inline void MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) { diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 9488dcff7aec..e5293394b548 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -676,7 +676,7 @@ void mask_ioapic_entries(void) int apic, pin; for (apic = 0; apic < nr_ioapics; apic++) { - if (ioapics[apic].saved_registers) + if (!ioapics[apic].saved_registers) continue; for (pin = 0; pin < ioapics[apic].nr_registers; pin++) { @@ -699,7 +699,7 @@ int restore_ioapic_entries(void) int apic, pin; for (apic = 0; apic < nr_ioapics; apic++) { - if (ioapics[apic].saved_registers) + if (!ioapics[apic].saved_registers) continue; for (pin = 0; pin < ioapics[apic].nr_registers; pin++) diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index f65e5b521dbd..807c2a2b80f1 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1363,7 +1363,7 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, * We must return the syscall number to actually look up in the table. * This can be -1L to skip running any syscall at all. */ -asmregparm long syscall_trace_enter(struct pt_regs *regs) +long syscall_trace_enter(struct pt_regs *regs) { long ret = 0; @@ -1408,7 +1408,7 @@ asmregparm long syscall_trace_enter(struct pt_regs *regs) return ret ?: regs->orig_ax; } -asmregparm void syscall_trace_leave(struct pt_regs *regs) +void syscall_trace_leave(struct pt_regs *regs) { bool step; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 605e5ae19c7f..a3e5948670c2 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -946,6 +946,8 @@ void __init setup_arch(char **cmdline_p) if (init_ohci1394_dma_early) init_ohci1394_dma_on_all_controllers(); #endif + /* Allocate bigger log buffer */ + setup_log_buf(1); reserve_initrd(); diff --git a/arch/x86/kernel/tboot.c b/arch/x86/kernel/tboot.c index 998e972f3b1a..30ac65df7d4e 100644 --- a/arch/x86/kernel/tboot.c +++ b/arch/x86/kernel/tboot.c @@ -110,7 +110,6 @@ static struct mm_struct tboot_mm = { .mmap_sem = __RWSEM_INITIALIZER(init_mm.mmap_sem), .page_table_lock = __SPIN_LOCK_UNLOCKED(init_mm.page_table_lock), .mmlist = LIST_HEAD_INIT(init_mm.mmlist), - .cpu_vm_mask = CPU_MASK_ALL, }; static inline void switch_to_tboot_pt(void) diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 74b5ad450c7e..89aed99aafce 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -314,7 +314,7 @@ SECTIONS } #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) - PERCPU(INTERNODE_CACHE_BYTES, PAGE_SIZE) + PERCPU_SECTION(INTERNODE_CACHE_BYTES) #endif . = ALIGN(PAGE_SIZE); diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 5f6ad032575a..3e682184d76c 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -52,7 +52,7 @@ DEFINE_VVAR(int, vgetcpu_mode); DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) = { - .lock = SEQLOCK_UNLOCKED, + .lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock), .sysctl_enabled = 1, }; diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 28418054b880..bd14bb4c8594 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3545,10 +3545,11 @@ static int kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm, return kvm_mmu_prepare_zap_page(kvm, page, invalid_list); } -static int mmu_shrink(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask) +static int mmu_shrink(struct shrinker *shrink, struct shrink_control *sc) { struct kvm *kvm; struct kvm *kvm_freed = NULL; + int nr_to_scan = sc->nr_to_scan; if (nr_to_scan == 0) goto out; diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index bcb394dfbb35..f7a2a054a3c0 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -965,7 +965,7 @@ do_page_fault(struct pt_regs *regs, unsigned long error_code) struct mm_struct *mm; int fault; int write = error_code & PF_WRITE; - unsigned int flags = FAULT_FLAG_ALLOW_RETRY | + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | (write ? FAULT_FLAG_WRITE : 0); tsk = current; @@ -1139,6 +1139,16 @@ good_area: } /* + * Pagefault was interrupted by SIGKILL. We have no reason to + * continue pagefault. + */ + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) { + if (!(error_code & PF_USER)) + no_context(regs, error_code, address); + return; + } + + /* * Major/minor page fault accounting is only done on the * initial attempt. If we go through a retry, it is extremely * likely that the page will be found in page cache at that point. diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c index d4203988504a..f581a18c0d4d 100644 --- a/arch/x86/mm/hugetlbpage.c +++ b/arch/x86/mm/hugetlbpage.c @@ -72,7 +72,7 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) if (!vma_shareable(vma, addr)) return; - spin_lock(&mapping->i_mmap_lock); + mutex_lock(&mapping->i_mmap_mutex); vma_prio_tree_foreach(svma, &iter, &mapping->i_mmap, idx, idx) { if (svma == vma) continue; @@ -97,7 +97,7 @@ static void huge_pmd_share(struct mm_struct *mm, unsigned long addr, pud_t *pud) put_page(virt_to_page(spte)); spin_unlock(&mm->page_table_lock); out: - spin_unlock(&mapping->i_mmap_lock); + mutex_unlock(&mapping->i_mmap_mutex); } /* diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index 37b8b0fe8320..30326443ab81 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -16,8 +16,6 @@ #include <asm/tlb.h> #include <asm/proto.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - unsigned long __initdata pgt_buf_start; unsigned long __meminitdata pgt_buf_end; unsigned long __meminitdata pgt_buf_top; diff --git a/arch/xtensa/include/asm/page.h b/arch/xtensa/include/asm/page.h index 161bb89e98c8..7a5591a71f85 100644 --- a/arch/xtensa/include/asm/page.h +++ b/arch/xtensa/include/asm/page.h @@ -171,10 +171,6 @@ extern void copy_user_page(void*, void*, unsigned long, struct page*); #define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) -#ifdef CONFIG_MMU -#define WANT_PAGE_VIRTUAL -#endif - #endif /* __ASSEMBLY__ */ #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index a2820065927e..88ecea3facb4 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -155,7 +155,7 @@ SECTIONS INIT_RAM_FS } - PERCPU(XCHAL_ICACHE_LINESIZE, PAGE_SIZE) + PERCPU_SECTION(XCHAL_ICACHE_LINESIZE) /* We need this dummy segment here */ diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c index 4bb91a970f1f..ca81654f3ec2 100644 --- a/arch/xtensa/mm/mmu.c +++ b/arch/xtensa/mm/mmu.c @@ -14,8 +14,6 @@ #include <asm/mmu_context.h> #include <asm/page.h> -DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); - void __init paging_init(void) { memset(swapper_pg_dir, 0, PAGE_SIZE); diff --git a/arch/xtensa/mm/pgtable.c b/arch/xtensa/mm/pgtable.c deleted file mode 100644 index 697992738205..000000000000 --- a/arch/xtensa/mm/pgtable.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * arch/xtensa/mm/pgtable.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 - 2005 Tensilica Inc. - * - * Chris Zankel <chris@zankel.net> - */ - -#if (DCACHE_SIZE > PAGE_SIZE) - -pte_t* pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte = NULL, *p; - int color = ADDR_COLOR(address); - int i; - - p = (pte_t*) __get_free_pages(GFP_KERNEL|__GFP_REPEAT, COLOR_ORDER); - - if (likely(p)) { - split_page(virt_to_page(p), COLOR_ORDER); - - for (i = 0; i < COLOR_SIZE; i++) { - if (ADDR_COLOR(p) == color) - pte = p; - else - free_page(p); - p += PTRS_PER_PTE; - } - clear_page(pte); - } - return pte; -} - -#ifdef PROFILING - -int mask; -int hit; -int flush; - -#endif - -struct page* pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *page = NULL, *p; - int color = ADDR_COLOR(address); - - p = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER); - - if (likely(p)) { - split_page(p, COLOR_ORDER); - - for (i = 0; i < PAGE_ORDER; i++) { - if (PADDR_COLOR(page_address(p)) == color) - page = p; - else - __free_page(p); - p++; - } - clear_highpage(page); - } - - return page; -} - -#endif - - - |