1377 files changed, 72269 insertions, 52245 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 3d72dc3fc8f5..694c9af520bb 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,5 +27,12 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config KRETPROBES
+	def_bool y
+	depends on KPROBES && HAVE_KRETPROBES
+
 config HAVE_KPROBES
 	def_bool n
+
+config HAVE_KRETPROBES
+	def_bool n
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 002703b8c0b0..729cdbdf8036 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -330,6 +330,9 @@ config PCI_DOMAINS
 config PCI_SYSCALL
 	def_bool PCI
 
+config IOMMU_HELPER
+	def_bool PCI
+
 config ALPHA_CORE_AGP
 	bool
 	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index dccf05245d4d..ac706c1d7ada 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -7,7 +7,7 @@ EXTRA_AFLAGS	:= $(KBUILD_CFLAGS)
 EXTRA_CFLAGS	:= -Werror -Wno-sign-compare
 
 obj-y    := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
-	    irq_alpha.o signal.o setup.o ptrace.o time.o semaphore.o \
+	    irq_alpha.o signal.o setup.o ptrace.o time.o \
 	    alpha_ksyms.o systbls.o err_common.o io.o
 
 obj-$(CONFIG_VGA_HOSE)	+= console.o
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c
index e9762a33b043..d96e742d4dc2 100644
--- a/arch/alpha/kernel/alpha_ksyms.c
+++ b/arch/alpha/kernel/alpha_ksyms.c
@@ -77,15 +77,6 @@ EXPORT_SYMBOL(__do_clear_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__strnlen_user);
 
-/* Semaphore helper functions.  */
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__up_wakeup);
-EXPORT_SYMBOL(down);
-EXPORT_SYMBOL(down_interruptible);
-EXPORT_SYMBOL(down_trylock);
-EXPORT_SYMBOL(up);
-
 /* 
  * SMP-specific symbols.
  */
diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c
index 9dc1cee43265..c107cc08daf4 100644
--- a/arch/alpha/kernel/pci.c
+++ b/arch/alpha/kernel/pci.c
@@ -372,28 +372,7 @@ EXPORT_SYMBOL(pcibios_bus_to_resource);
 int
 pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, oldcmd;
-	int i;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	oldcmd = cmd;
-
-	for (i = 0; i < PCI_NUM_RESOURCES; i++) {
-		struct resource *res = &dev->resource[i];
-
-		if (res->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		else if (res->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-
-	if (cmd != oldcmd) {
-		printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
-		       pci_name(dev), cmd);
-		/* Enable the appropriate bits in the PCI command register.  */
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 /*
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 26d3789dfdd0..dd6e334ab9e1 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -10,6 +10,7 @@
 #include <linux/scatterlist.h>
 #include <linux/log2.h>
 #include <linux/dma-mapping.h>
+#include <linux/iommu-helper.h>
 
 #include <asm/io.h>
 #include <asm/hwrpb.h>
@@ -31,7 +32,6 @@
 #endif
 
 #define DEBUG_NODIRECT 0
-#define DEBUG_FORCEDAC 0
 
 #define ISA_DMA_MASK		0x00ffffff
 
@@ -128,37 +128,55 @@ iommu_arena_new(struct pci_controller *hose, dma_addr_t base,
 
 /* Must be called with the arena lock held */
 static long
-iommu_arena_find_pages(struct pci_iommu_arena *arena, long n, long mask)
+iommu_arena_find_pages(struct device *dev, struct pci_iommu_arena *arena,
+		       long n, long mask)
 {
 	unsigned long *ptes;
 	long i, p, nent;
+	int pass = 0;
+	unsigned long base;
+	unsigned long boundary_size;
+
+	base = arena->dma_base >> PAGE_SHIFT;
+	if (dev) {
+		boundary_size = dma_get_seg_boundary(dev) + 1;
+		boundary_size >>= PAGE_SHIFT;
+	} else {
+		boundary_size = 1UL << (32 - PAGE_SHIFT);
+	}
 
 	/* Search forward for the first mask-aligned sequence of N free ptes */
 	ptes = arena->ptes;
 	nent = arena->size >> PAGE_SHIFT;
-	p = (arena->next_entry + mask) & ~mask;
+	p = ALIGN(arena->next_entry, mask + 1);
 	i = 0;
+
+again:
 	while (i < n && p+i < nent) {
+		if (!i && iommu_is_span_boundary(p, n, base, boundary_size)) {
+			p = ALIGN(p + 1, mask + 1);
+			goto again;
+		}
+
 		if (ptes[p+i])
-			p = (p + i + 1 + mask) & ~mask, i = 0;
+			p = ALIGN(p + i + 1, mask + 1), i = 0;
 		else
 			i = i + 1;
 	}
 
 	if (i < n) {
-                /* Reached the end.  Flush the TLB and restart the
-                   search from the beginning.  */
-		alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
-
-		p = 0, i = 0;
-		while (i < n && p+i < nent) {
-			if (ptes[p+i])
-				p = (p + i + 1 + mask) & ~mask, i = 0;
-			else
-				i = i + 1;
-		}
-
-		if (i < n)
+		if (pass < 1) {
+			/*
+			 * Reached the end.  Flush the TLB and restart
+			 * the search from the beginning.
+			*/
+			alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
+
+			pass++;
+			p = 0;
+			i = 0;
+			goto again;
+		} else
 			return -1;
 	}
 
@@ -168,7 +186,8 @@ iommu_arena_find_pages(struct pci_iommu_arena *arena, long n, long mask)
 }
 
 static long
-iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
+iommu_arena_alloc(struct device *dev, struct pci_iommu_arena *arena, long n,
+		  unsigned int align)
 {
 	unsigned long flags;
 	unsigned long *ptes;
@@ -179,7 +198,7 @@ iommu_arena_alloc(struct pci_iommu_arena *arena, long n, unsigned int align)
 	/* Search for N empty ptes */
 	ptes = arena->ptes;
 	mask = max(align, arena->align_entry) - 1;
-	p = iommu_arena_find_pages(arena, n, mask);
+	p = iommu_arena_find_pages(dev, arena, n, mask);
 	if (p < 0) {
 		spin_unlock_irqrestore(&arena->lock, flags);
 		return -1;
@@ -229,6 +248,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	unsigned long paddr;
 	dma_addr_t ret;
 	unsigned int align = 0;
+	struct device *dev = pdev ? &pdev->dev : NULL;
 
 	paddr = __pa(cpu_addr);
 
@@ -276,7 +296,7 @@ pci_map_single_1(struct pci_dev *pdev, void *cpu_addr, size_t size,
 	/* Force allocation to 64KB boundary for ISA bridges. */
 	if (pdev && pdev == isa_bridge)
 		align = 8;
-	dma_ofs = iommu_arena_alloc(arena, npages, align);
+	dma_ofs = iommu_arena_alloc(dev, arena, npages, align);
 	if (dma_ofs < 0) {
 		printk(KERN_WARNING "pci_map_single failed: "
 		       "could not allocate dma page tables\n");
@@ -404,11 +424,13 @@ EXPORT_SYMBOL(pci_unmap_page);
    else DMA_ADDRP is undefined.  */
 
 void *
-pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
+__pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+		       dma_addr_t *dma_addrp, gfp_t gfp)
 {
 	void *cpu_addr;
 	long order = get_order(size);
-	gfp_t gfp = GFP_ATOMIC;
+
+	gfp &= ~GFP_DMA;
 
 try_again:
 	cpu_addr = (void *)__get_free_pages(gfp, order);
@@ -438,7 +460,7 @@ try_again:
 
 	return cpu_addr;
 }
-EXPORT_SYMBOL(pci_alloc_consistent);
+EXPORT_SYMBOL(__pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
    be values that were returned from pci_alloc_consistent.  SIZE must
@@ -563,7 +585,7 @@ sg_fill(struct device *dev, struct scatterlist *leader, struct scatterlist *end,
 
 	paddr &= ~PAGE_MASK;
 	npages = calc_npages(paddr + size);
-	dma_ofs = iommu_arena_alloc(arena, npages, 0);
+	dma_ofs = iommu_arena_alloc(dev, arena, npages, 0);
 	if (dma_ofs < 0) {
 		/* If we attempted a direct map above but failed, die.  */
 		if (leader->dma_address == 0)
@@ -830,7 +852,7 @@ iommu_reserve(struct pci_iommu_arena *arena, long pg_count, long align_mask)
 
 	/* Search for N empty ptes.  */
 	ptes = arena->ptes;
-	p = iommu_arena_find_pages(arena, pg_count, align_mask);
+	p = iommu_arena_find_pages(NULL, arena, pg_count, align_mask);
 	if (p < 0) {
 		spin_unlock_irqrestore(&arena->lock, flags);
 		return -1;
diff --git a/arch/alpha/kernel/semaphore.c b/arch/alpha/kernel/semaphore.c
deleted file mode 100644
index 8d2982aa1b8d..000000000000
--- a/arch/alpha/kernel/semaphore.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Alpha semaphore implementation.
- *
- * (C) Copyright 1996 Linus Torvalds
- * (C) Copyright 1999, 2000 Richard Henderson
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-/*
- * This is basically the PPC semaphore scheme ported to use
- * the Alpha ll/sc sequences, so see the PPC code for
- * credits.
- */
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- *	old_count = sem->count;
- *	tmp = MAX(old_count, 0) + incr;
- *	sem->count = tmp;
- *	return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
-	long old_count, tmp = 0;
-
-	__asm__ __volatile__(
-	"1:	ldl_l	%0,%2\n"
-	"	cmovgt	%0,%0,%1\n"
-	"	addl	%1,%3,%1\n"
-	"	stl_c	%1,%2\n"
-	"	beq	%1,2f\n"
-	"	mb\n"
-	".subsection 2\n"
-	"2:	br	1b\n"
-	".previous"
-	: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
-	: "Ir" (incr), "1" (tmp), "m" (sem->count));
-
-	return old_count;
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- */
-
-void __sched
-__down_failed(struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down failed(%p)\n",
-	       tsk->comm, task_pid_nr(tsk), sem);
-#endif
-
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	wmb();
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	/*
-	 * Try to get the semaphore.  If the count is > 0, then we've
-	 * got the semaphore; we decrement count and exit the loop.
-	 * If the count is 0 or negative, we set it to -1, indicating
-	 * that we are asleep, and then sleep.
-	 */
-	while (__sem_update_count(sem, -1) <= 0) {
-		schedule();
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-
-	/*
-	 * If there are any more sleepers, wake one of them up so
-	 * that it can either get the semaphore, or set count to -1
-	 * indicating that there are still processes sleeping.
-	 */
-	wake_up(&sem->wait);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down acquired(%p)\n",
-	       tsk->comm, task_pid_nr(tsk), sem);
-#endif
-}
-
-int __sched
-__down_failed_interruptible(struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	long ret = 0;
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down failed(%p)\n",
-	       tsk->comm, task_pid_nr(tsk), sem);
-#endif
-
-	tsk->state = TASK_INTERRUPTIBLE;
-	wmb();
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	while (__sem_update_count(sem, -1) <= 0) {
-		if (signal_pending(current)) {
-			/*
-			 * A signal is pending - give up trying.
-			 * Set sem->count to 0 if it is negative,
-			 * since we are no longer sleeping.
-			 */
-			__sem_update_count(sem, 0);
-			ret = -EINTR;
-			break;
-		}
-		schedule();
-		set_task_state(tsk, TASK_INTERRUPTIBLE);
-	}
-
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-	wake_up(&sem->wait);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down %s(%p)\n",
-	       current->comm, task_pid_nr(current),
-	       (ret < 0 ? "interrupted" : "acquired"), sem);
-#endif
-	return ret;
-}
-
-void
-__up_wakeup(struct semaphore *sem)
-{
-	/*
-	 * Note that we incremented count in up() before we came here,
-	 * but that was ineffective since the result was <= 0, and
-	 * any negative value of count is equivalent to 0.
-	 * This ends up setting count to 1, unless count is now > 0
-	 * (i.e. because some other cpu has called up() in the meantime),
-	 * in which case we just increment count.
-	 */
-	__sem_update_count(sem, 1);
-	wake_up(&sem->wait);
-}
-
-void __sched
-down(struct semaphore *sem)
-{
-#ifdef WAITQUEUE_DEBUG
-	CHECK_MAGIC(sem->__magic);
-#endif
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down(%p) <count=%d> from %p\n",
-	       current->comm, task_pid_nr(current), sem,
-	       atomic_read(&sem->count), __builtin_return_address(0));
-#endif
-	__down(sem);
-}
-
-int __sched
-down_interruptible(struct semaphore *sem)
-{
-#ifdef WAITQUEUE_DEBUG
-	CHECK_MAGIC(sem->__magic);
-#endif
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down(%p) <count=%d> from %p\n",
-	       current->comm, task_pid_nr(current), sem,
-	       atomic_read(&sem->count), __builtin_return_address(0));
-#endif
-	return __down_interruptible(sem);
-}
-
-int
-down_trylock(struct semaphore *sem)
-{
-	int ret;
-
-#ifdef WAITQUEUE_DEBUG
-	CHECK_MAGIC(sem->__magic);
-#endif
-
-	ret = __down_trylock(sem);
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): down_trylock %s from %p\n",
-	       current->comm, task_pid_nr(current),
-	       ret ? "failed" : "acquired",
-	       __builtin_return_address(0));
-#endif
-
-	return ret;
-}
-
-void
-up(struct semaphore *sem)
-{
-#ifdef WAITQUEUE_DEBUG
-	CHECK_MAGIC(sem->__magic);
-#endif
-#ifdef CONFIG_DEBUG_SEMAPHORE
-	printk("%s(%d): up(%p) <count=%d> from %p\n",
-	       current->comm, task_pid_nr(current), sem,
-	       atomic_read(&sem->count), __builtin_return_address(0));
-#endif
-	__up(sem);
-}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 16b82e1272b0..d8d253285a94 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,6 +12,7 @@ config ARM
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
 	select HAVE_KPROBES if (!XIP_KERNEL)
+	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -254,6 +255,7 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -376,15 +378,17 @@ config ARCH_MXC
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
-config ARCH_ORION
+config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
 	select PCI
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
 	help
-	  Support for Marvell Orion System on Chip family.
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
@@ -421,10 +425,15 @@ config ARCH_SA1100
 	bool "SA1100-based"
 	select ISA
 	select ARCH_DISCONTIGMEM_ENABLE
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SELECT_MEMORY_MODEL
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select TICK_ONESHOT
 	select HAVE_IDE
+	select HAVE_GPIO_LIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
@@ -467,7 +476,9 @@ config ARCH_DAVINCI
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
 	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -514,7 +525,7 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
-source "arch/arm/mach-orion/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -561,6 +572,9 @@ config ARCH_ACORN
 config PLAT_IOP
 	bool
 
+config PLAT_ORION
+	bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -648,7 +662,7 @@ source "kernel/time/Kconfig"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
+	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -681,7 +695,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
-	depends on SMP && REALVIEW_EB_ARM11MP
+	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
 	default y
 	help
 	  Enable support for local timers on SMP platforms, rather then the
@@ -772,6 +786,12 @@ config ARCH_DISCONTIGMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+config ARCH_SPARSEMEM_ENABLE
+	bool
+
+config ARCH_SELECT_MEMORY_MODEL
+	bool
+
 config NODES_SHIFT
 	int
 	default "4" if ARCH_LH7A40X
@@ -1172,6 +1192,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/uio/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 7b8ff66febe1..e72db27e0ba0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -134,12 +134,11 @@ endif
  machine-$(CONFIG_ARCH_PNX4008)	   := pnx4008
  machine-$(CONFIG_ARCH_NETX)	   := netx
  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
- textofs-$(CONFIG_ARCH_NS9XXX)	   := 0x00108000
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
   incdir-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX3)	   := mx3
- machine-$(CONFIG_ARCH_ORION)	   := orion
+ machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
@@ -185,6 +184,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
 # If we have a common platform directory, then include it in the build.
 core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
+core-$(CONFIG_PLAT_ORION)		+= arch/arm/plat-orion/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
 core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
@@ -251,6 +251,7 @@ define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
   echo  '  Image         - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
   echo  '* xipImage      - XIP kernel image, if configured (arch/$(ARCH)/boot/xipImage)'
+  echo  '  uImage        - U-Boot wrapped zImage'
   echo  '  bootpImage    - Combined zImage and initial RAM disk' 
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
   echo  '  install       - Install uncompressed kernel'
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 25f12303b106..da226abce2d0 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -61,9 +61,15 @@ endif
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
-		   -C none -a $(ZRELADDR) -e $(ZRELADDR) \
+		   -C none -a $(LOADADDR) -e $(LOADADDR) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
+ifeq ($(CONFIG_ZBOOT_ROM),y)
+$(obj)/uImage: LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
+else
+$(obj)/uImage: LOADADDR=$(ZRELADDR)
+endif
+
 $(obj)/uImage:	$(obj)/zImage FORCE
 	$(call if_changed,uimage)
 	@echo '  Image $@ is ready'
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index 97b7dc13d9aa..5fe9588db077 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -120,6 +120,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 			  time, when they all three were 0. */
 		       bits_pd = __raw_readl(IT8152_INTC_PDCNIRR);
 		       bits_lp = __raw_readl(IT8152_INTC_LPCNIRR);
+		       bits_ld = __raw_readl(IT8152_INTC_LDCNIRR);
 		       if (!(bits_ld | bits_lp | bits_pd))
 			       return;
 	       }
@@ -133,14 +134,14 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 
 	       bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1);
 	       while (bits_lp) {
-		       i = __ffs(bits_pd);
+		       i = __ffs(bits_lp);
 		       it8152_irq(IT8152_LP_IRQ(i));
 		       bits_lp &= ~(1 << i);
 	       }
 
 	       bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1);
 	       while (bits_ld) {
-		       i = __ffs(bits_pd);
+		       i = __ffs(bits_ld);
 		       it8152_irq(IT8152_LD_IRQ(i));
 		       bits_ld &= ~(1 << i);
 	       }
@@ -274,7 +275,7 @@ static int it8152_pci_platform_notify_remove(struct device *dev)
 int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
 {
 	dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
-		__FUNCTION__, dma_addr, size);
+		__func__, dma_addr, size);
 	return (dev->bus == &pci_bus_type) &&
 		((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
 }
@@ -289,7 +290,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
  */
 int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 {
-	dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
+	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
 	if (mask >= PHYS_OFFSET + SZ_64M - 1)
 		return 0;
 
@@ -299,7 +300,7 @@ int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
 int
 pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
 {
-	dev_dbg(&dev->dev, "%s: %llx\n", __FUNCTION__, mask);
+	dev_dbg(&dev->dev, "%s: %llx\n", __func__, mask);
 	if (mask >= PHYS_OFFSET + SZ_64M - 1)
 		return 0;
 
diff --git a/arch/arm/common/rtctime.c b/arch/arm/common/rtctime.c
index f53bca46e23c..aa8f7739c822 100644
--- a/arch/arm/common/rtctime.c
+++ b/arch/arm/common/rtctime.c
@@ -22,7 +22,6 @@
 #include <linux/mutex.h>
 
 #include <asm/rtc.h>
-#include <asm/semaphore.h>
 
 static DECLARE_WAIT_QUEUE_HEAD(rtc_wait);
 static struct fasync_struct *rtc_async_queue;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 314ebd3a1d71..bc299b07a6fa 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -16,6 +16,7 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
+#include <asm/gpio.h>
 #include <asm/hardware/scoop.h>
 
 /* PCMCIA to Scoop linkage
@@ -30,10 +31,9 @@
 struct scoop_pcmcia_config *platform_scoop_config;
 EXPORT_SYMBOL(platform_scoop_config);
 
-#define SCOOP_REG(d,adr) (*(volatile unsigned short*)(d +(adr)))
-
 struct  scoop_dev {
-	void  *base;
+	void __iomem *base;
+	struct gpio_chip gpio;
 	spinlock_t scoop_lock;
 	unsigned short suspend_clr;
 	unsigned short suspend_set;
@@ -44,13 +44,84 @@ void reset_scoop(struct device *dev)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-	SCOOP_REG(sdev->base,SCOOP_MCR) = 0x0100;  // 00
-	SCOOP_REG(sdev->base,SCOOP_CDR) = 0x0000;  // 04
-	SCOOP_REG(sdev->base,SCOOP_CCR) = 0x0000;  // 10
-	SCOOP_REG(sdev->base,SCOOP_IMR) = 0x0000;  // 18
-	SCOOP_REG(sdev->base,SCOOP_IRM) = 0x00FF;  // 14
-	SCOOP_REG(sdev->base,SCOOP_ISR) = 0x0000;  // 1C
-	SCOOP_REG(sdev->base,SCOOP_IRM) = 0x0000;
+	iowrite16(0x0100, sdev->base + SCOOP_MCR);  // 00
+	iowrite16(0x0000, sdev->base + SCOOP_CDR);  // 04
+	iowrite16(0x0000, sdev->base + SCOOP_CCR);  // 10
+	iowrite16(0x0000, sdev->base + SCOOP_IMR);  // 18
+	iowrite16(0x00FF, sdev->base + SCOOP_IRM);  // 14
+	iowrite16(0x0000, sdev->base + SCOOP_ISR);  // 1C
+	iowrite16(0x0000, sdev->base + SCOOP_IRM);
+}
+
+static void __scoop_gpio_set(struct scoop_dev *sdev,
+			unsigned offset, int value)
+{
+	unsigned short gpwr;
+
+	gpwr = ioread16(sdev->base + SCOOP_GPWR);
+	if (value)
+		gpwr |= 1 << (offset + 1);
+	else
+		gpwr &= ~(1 << (offset + 1));
+	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
+}
+
+static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	__scoop_gpio_set(sdev, offset, value);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+}
+
+static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+
+	/* XXX: I'm usure,  but it seems so */
+	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
+}
+
+static int scoop_gpio_direction_input(struct gpio_chip *chip,
+			unsigned offset)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	unsigned long flags;
+	unsigned short gpcr;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	gpcr = ioread16(sdev->base + SCOOP_GPCR);
+	gpcr &= ~(1 << (offset + 1));
+	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
+}
+
+static int scoop_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
+	unsigned long flags;
+	unsigned short gpcr;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	__scoop_gpio_set(sdev, offset, value);
+
+	gpcr = ioread16(sdev->base + SCOOP_GPCR);
+	gpcr |= 1 << (offset + 1);
+	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
 }
 
 unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
@@ -60,8 +131,8 @@ unsigned short set_scoop_gpio(struct device *dev, unsigned short bit)
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
 	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) | bit;
-	SCOOP_REG(sdev->base, SCOOP_GPWR) = gpio_bit;
+	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) | bit;
+	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
 	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
 
 	return gpio_bit;
@@ -74,8 +145,8 @@ unsigned short reset_scoop_gpio(struct device *dev, unsigned short bit)
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
 
 	spin_lock_irqsave(&sdev->scoop_lock, flag);
-	gpio_bit = SCOOP_REG(sdev->base, SCOOP_GPWR) & ~bit;
-	SCOOP_REG(sdev->base,SCOOP_GPWR) = gpio_bit;
+	gpio_bit = ioread16(sdev->base + SCOOP_GPWR) & ~bit;
+	iowrite16(gpio_bit, sdev->base + SCOOP_GPWR);
 	spin_unlock_irqrestore(&sdev->scoop_lock, flag);
 
 	return gpio_bit;
@@ -87,13 +158,13 @@ EXPORT_SYMBOL(reset_scoop_gpio);
 unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
-	return SCOOP_REG(sdev->base,reg);
+	return ioread16(sdev->base + reg);
 }
 
 void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data)
 {
 	struct scoop_dev *sdev = dev_get_drvdata(dev);
-	SCOOP_REG(sdev->base,reg)=data;
+	iowrite16(data, sdev->base + reg);
 }
 
 EXPORT_SYMBOL(reset_scoop);
@@ -104,9 +175,9 @@ static void check_scoop_reg(struct scoop_dev *sdev)
 {
 	unsigned short mcr;
 
-	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	mcr = ioread16(sdev->base + SCOOP_MCR);
 	if ((mcr & 0x100) == 0)
-		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+		iowrite16(0x0101, sdev->base + SCOOP_MCR);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +186,8 @@ static int scoop_suspend(struct platform_device *dev, pm_message_t state)
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
 
 	check_scoop_reg(sdev);
-	sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
-	SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
+	sdev->scoop_gpwr = ioread16(sdev->base + SCOOP_GPWR);
+	iowrite16((sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set, sdev->base + SCOOP_GPWR);
 
 	return 0;
 }
@@ -126,7 +197,7 @@ static int scoop_resume(struct platform_device *dev)
 	struct scoop_dev *sdev = platform_get_drvdata(dev);
 
 	check_scoop_reg(sdev);
-	SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
+	iowrite16(sdev->scoop_gpwr, sdev->base + SCOOP_GPWR);
 
 	return 0;
 }
@@ -135,11 +206,13 @@ static int scoop_resume(struct platform_device *dev)
 #define scoop_resume	NULL
 #endif
 
-int __init scoop_probe(struct platform_device *pdev)
+static int __devinit scoop_probe(struct platform_device *pdev)
 {
 	struct scoop_dev *devptr;
 	struct scoop_config *inf;
 	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int ret;
+	int temp;
 
 	if (!mem)
 		return -EINVAL;
@@ -154,40 +227,78 @@ int __init scoop_probe(struct platform_device *pdev)
 	devptr->base = ioremap(mem->start, mem->end - mem->start + 1);
 
 	if (!devptr->base) {
-		kfree(devptr);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_ioremap;
 	}
 
 	platform_set_drvdata(pdev, devptr);
 
-	printk("Sharp Scoop Device found at 0x%08x -> 0x%08x\n",(unsigned int)mem->start,(unsigned int)devptr->base);
+	printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base);
 
-	SCOOP_REG(devptr->base, SCOOP_MCR) = 0x0140;
+	iowrite16(0x0140, devptr->base + SCOOP_MCR);
 	reset_scoop(&pdev->dev);
-	SCOOP_REG(devptr->base, SCOOP_CPR) = 0x0000;
-	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
-	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
+	iowrite16(0x0000, devptr->base + SCOOP_CPR);
+	iowrite16(inf->io_dir & 0xffff, devptr->base + SCOOP_GPCR);
+	iowrite16(inf->io_out & 0xffff, devptr->base + SCOOP_GPWR);
 
 	devptr->suspend_clr = inf->suspend_clr;
 	devptr->suspend_set = inf->suspend_set;
 
+	devptr->gpio.base = -1;
+
+	if (inf->gpio_base != 0) {
+		devptr->gpio.label = pdev->dev.bus_id;
+		devptr->gpio.base = inf->gpio_base;
+		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
+		devptr->gpio.set = scoop_gpio_set;
+		devptr->gpio.get = scoop_gpio_get;
+		devptr->gpio.direction_input = scoop_gpio_direction_input;
+		devptr->gpio.direction_output = scoop_gpio_direction_output;
+
+		ret = gpiochip_add(&devptr->gpio);
+		if (ret)
+			goto err_gpio;
+	}
+
 	return 0;
+
+	if (devptr->gpio.base != -1)
+		temp = gpiochip_remove(&devptr->gpio);
+err_gpio:
+	platform_set_drvdata(pdev, NULL);
+err_ioremap:
+	iounmap(devptr->base);
+	kfree(devptr);
+
+	return ret;
 }
 
-static int scoop_remove(struct platform_device *pdev)
+static int __devexit scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
-	if (sdev) {
-		iounmap(sdev->base);
-		kfree(sdev);
-		platform_set_drvdata(pdev, NULL);
+	int ret;
+
+	if (!sdev)
+		return -EINVAL;
+
+	if (sdev->gpio.base != -1) {
+		ret = gpiochip_remove(&sdev->gpio);
+		if (ret) {
+			dev_err(&pdev->dev, "Can't remove gpio chip: %d\n", ret);
+			return ret;
+		}
 	}
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(sdev->base);
+	kfree(sdev);
+
 	return 0;
 }
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove 	= scoop_remove,
+	.remove		= __devexit_p(scoop_remove),
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
@@ -195,7 +306,7 @@ static struct platform_driver scoop_driver = {
 	},
 };
 
-int __init scoop_init(void)
+static int __init scoop_init(void)
 {
 	return platform_driver_register(&scoop_driver);
 }
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
new file mode 100644
index 000000000000..dc030cfe5009
--- /dev/null
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -0,0 +1,1149 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc3
+# Sun Mar  9 06:33:33 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="gum"
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+CONFIG_ARCH_GUMSTIX=y
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_MACH_GUMSTIX_F=y
+CONFIG_PXA25x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_IWMMXT is not set
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+# CONFIG_PCMCIA_IOCTL is not set
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=1f01 rootfstype=jffs2"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+# CONFIG_IEEE80211_SOFTMAC is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+CONFIG_IDE_MAX_HWIFS=2
+CONFIG_BLK_DEV_IDE=m
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=m
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=m
+# CONFIG_DM9000 is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+CONFIG_FB_SYS_FILLRECT=m
+CONFIG_FB_SYS_COPYAREA=m
+CONFIG_FB_SYS_IMAGEBLIT=m
+CONFIG_FB_SYS_FOPS=m
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+CONFIG_FB_PXA_PARAMETERS=y
+CONFIG_FB_MBX=m
+CONFIG_FB_VIRTUAL=m
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_AC97=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+CONFIG_USB_GADGET_PXA2XX=y
+CONFIG_USB_PXA2XX=y
+# CONFIG_USB_PXA2XX_SMALL is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index e10d003566d6..2dbbbc3d4ac3 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -620,14 +620,14 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 834dddb51314..6e994f7820c6 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -594,14 +594,14 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 46b0c734aeb9..f659c938473f 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -1,43 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Fri Nov 17 18:42:21 2006
+# Linux kernel version: 2.6.24-rc7
+# Tue Jan  8 22:20:50 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -53,30 +66,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -108,12 +121,16 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -121,29 +138,52 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
 # Atmel AT91 System-on-Chip
 #
 # CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_AT91SAM9260=y
 # CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
 
 #
-# AT91SAM9260 Board Type
+# AT91SAM9260 / AT91SAM9XE Board Type
 #
 CONFIG_MACH_AT91SAM9260EK=y
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
 
 #
 # AT91 Board Options
 #
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
 # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
 #
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ATMEL_TCLIB is not set
+CONFIG_AT91_TIMER_HZ=100
 
 #
 # Processor Type
@@ -166,19 +206,19 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
@@ -191,8 +231,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -203,6 +247,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -228,7 +273,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -238,13 +283,9 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -263,33 +304,23 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -302,10 +333,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -315,7 +342,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -324,34 +361,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -360,15 +380,19 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -388,6 +412,8 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -395,43 +421,72 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
+# USB Network Adapters
 #
-# CONFIG_NETDEVICES is not set
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -439,6 +494,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -448,7 +504,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -458,6 +513,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -492,114 +548,131 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
 
 #
-# Ftape, the floppy tape device driver
+# I2C Algorithms
 #
-# CONFIG_RAW_DRIVER is not set
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
-# TPM devices
+# I2C Hardware Bus support
 #
-# CONFIG_TCG_TPM is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
 
 #
-# I2C support
+# Miscellaneous I2C Chip support
 #
-# CONFIG_I2C is not set
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
 # SPI support
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -610,7 +683,7 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -619,9 +692,11 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -640,6 +715,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -650,43 +726,10 @@ CONFIG_USB_STORAGE_DEBUG=y
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
@@ -708,6 +751,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -717,6 +761,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -727,13 +772,19 @@ CONFIG_USB_MON=y
 # USB Gadget Support
 #
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_AT91=y
 CONFIG_USB_AT91=y
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -745,17 +796,56 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# MMC/SD Card support
+# RTC interfaces
 #
-# CONFIG_MMC is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# Real Time Clock
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
 #
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
 
 #
 # File systems
@@ -806,7 +896,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -825,10 +914,7 @@ CONFIG_CRAMFS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -836,17 +922,12 @@ CONFIG_CRAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -887,41 +968,49 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -932,18 +1021,21 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index fcd8fa091e9d..3802e85f7483 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -1,43 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Fri Nov 17 18:00:38 2006
+# Linux kernel version: 2.6.24-rc7
+# Tue Jan  8 22:21:49 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -53,30 +66,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -108,12 +121,16 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -121,14 +138,27 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
 # Atmel AT91 System-on-Chip
 #
 # CONFIG_ARCH_AT91RM9200 is not set
 # CONFIG_ARCH_AT91SAM9260 is not set
 CONFIG_ARCH_AT91SAM9261=y
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
 # AT91SAM9261 Board Type
@@ -138,12 +168,15 @@ CONFIG_MACH_AT91SAM9261EK=y
 #
 # AT91 Board Options
 #
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
 # CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
 #
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ATMEL_TCLIB is not set
+CONFIG_AT91_TIMER_HZ=100
 
 #
 # Processor Type
@@ -166,19 +199,19 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
@@ -191,8 +224,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -203,6 +240,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -228,7 +266,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -238,13 +276,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -266,30 +304,20 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -302,10 +330,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -315,7 +339,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -324,20 +358,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -350,12 +378,14 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 # CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -375,7 +405,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -386,6 +415,8 @@ CONFIG_MTD_CFI_I2=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -397,35 +428,24 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_AT91=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -434,15 +454,19 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -462,6 +486,8 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -469,75 +495,49 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 CONFIG_DM9000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -545,10 +545,6 @@ CONFIG_DM9000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -556,6 +552,7 @@ CONFIG_DM9000=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -565,23 +562,43 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -609,75 +626,47 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_PCA is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -686,70 +675,125 @@ CONFIG_I2C_AT91=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
 
 #
-# Dallas's 1-wire bus
+# SPI Master Controller Drivers
 #
-# CONFIG_W1 is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
 
 #
-# Hardware Monitoring support
+# SPI Protocol Masters
 #
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
+# CONFIG_FB_INTSRAM is not set
+# CONFIG_FB_ATMEL_STN is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -760,7 +804,7 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -769,9 +813,11 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -790,6 +836,7 @@ CONFIG_USB_STORAGE=y
 CONFIG_USB_STORAGE_DEBUG=y
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -800,43 +847,10 @@ CONFIG_USB_STORAGE_DEBUG=y
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
@@ -858,6 +872,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -867,6 +882,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -877,13 +893,19 @@ CONFIG_USB_MON=y
 # USB Gadget Support
 #
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_AT91=y
 CONFIG_USB_AT91=y
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -895,21 +917,73 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91=m
-# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
 
 #
 # File systems
@@ -960,7 +1034,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -973,7 +1046,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
@@ -981,10 +1053,7 @@ CONFIG_CRAMFS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -992,17 +1061,12 @@ CONFIG_CRAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1043,41 +1107,49 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -1088,18 +1160,21 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index c72ab82873d5..32a0d74e0c89 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -1,12 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Mon Jan  8 16:06:54 2007
+# Linux kernel version: 2.6.24-rc7
+# Tue Jan  8 22:12:20 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -15,32 +21,36 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -56,32 +66,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -113,13 +121,16 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -127,15 +138,27 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
 # Atmel AT91 System-on-Chip
 #
 # CONFIG_ARCH_AT91RM9200 is not set
 # CONFIG_ARCH_AT91SAM9260 is not set
 # CONFIG_ARCH_AT91SAM9261 is not set
 CONFIG_ARCH_AT91SAM9263=y
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
 # AT91SAM9263 Board Type
@@ -152,6 +175,8 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y
 # AT91 Feature Selections
 #
 # CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+# CONFIG_ATMEL_TCLIB is not set
+CONFIG_AT91_TIMER_HZ=100
 
 #
 # Processor Type
@@ -174,19 +199,19 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
@@ -199,8 +224,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -211,6 +240,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -236,7 +266,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_APM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -246,7 +276,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -271,6 +300,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -281,20 +311,8 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -307,10 +325,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -320,7 +334,17 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -329,20 +353,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -362,6 +380,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -381,7 +400,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -405,35 +423,24 @@ CONFIG_MTD_DATAFLASH=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_AT91=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -443,15 +450,18 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -473,6 +483,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -480,80 +491,65 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -561,10 +557,6 @@ CONFIG_MII=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -572,6 +564,7 @@ CONFIG_MII=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -581,20 +574,26 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -603,6 +602,7 @@ CONFIG_TOUCHSCREEN_ADS7846=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -636,71 +636,47 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_PCA is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -722,61 +698,80 @@ CONFIG_SPI_ATMEL=y
 #
 # SPI Protocol Masters
 #
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9_WATCHDOG=y
 
 #
-# LED devices
+# USB-based Watchdog Cards
 #
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
 
 #
-# LED drivers
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# LED Triggers
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D15605 is not set
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_ATMEL=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -784,26 +779,28 @@ CONFIG_FB=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
+# CONFIG_USB_HID is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
@@ -814,9 +811,8 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -824,9 +820,11 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -845,6 +843,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -856,43 +855,10 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
@@ -914,6 +880,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -923,6 +890,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -933,13 +901,19 @@ CONFIG_USB_MON=y
 # USB Gadget Support
 #
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_AT91=y
 CONFIG_USB_AT91=y
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -951,21 +925,73 @@ CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
 CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91=m
-# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+CONFIG_MMC_AT91=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
 
 #
 # File systems
@@ -1016,7 +1042,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1032,10 +1057,12 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
@@ -1044,10 +1071,7 @@ CONFIG_CRAMFS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
@@ -1057,6 +1081,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1064,17 +1089,12 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1115,36 +1135,35 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1152,9 +1171,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -1165,10 +1188,7 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1177,8 +1197,13 @@ CONFIG_DEBUG_LL=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index fbe8b3049343..98e6746d02be 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21
-# Mon May  7 16:30:40 2007
+# Linux kernel version: 2.6.24-rc7
+# Tue Jan  8 22:24:14 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -23,27 +26,28 @@ CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -62,32 +66,30 @@ CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -119,14 +121,16 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -134,9 +138,18 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 
 #
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
 # Atmel AT91 System-on-Chip
 #
 # CONFIG_ARCH_AT91RM9200 is not set
@@ -144,6 +157,8 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_AT91SAM9261 is not set
 # CONFIG_ARCH_AT91SAM9263 is not set
 CONFIG_ARCH_AT91SAM9RL=y
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
 # AT91SAM9RL Board Type
@@ -157,7 +172,9 @@ CONFIG_MACH_AT91SAM9RLEK=y
 #
 # AT91 Feature Selections
 #
-# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ATMEL_TCLIB is not set
+CONFIG_AT91_TIMER_HZ=100
 
 #
 # Processor Type
@@ -185,15 +202,14 @@ CONFIG_CPU_CP15_MMU=y
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_NO_IDLE_HZ is not set
 CONFIG_HZ=100
@@ -206,9 +222,12 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -245,6 +264,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -254,7 +274,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
@@ -271,10 +290,6 @@ CONFIG_UNIX=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -284,7 +299,16 @@ CONFIG_UNIX=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -293,21 +317,14 @@ CONFIG_UNIX=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -327,6 +344,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -346,7 +364,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -370,36 +387,23 @@ CONFIG_MTD_DATAFLASH=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 CONFIG_MTD_NAND_AT91=y
 # CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -410,12 +414,16 @@ CONFIG_BLK_DEV_RAM_SIZE=24576
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -437,6 +445,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -444,47 +453,13 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 # CONFIG_NETDEVICES is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -492,6 +467,7 @@ CONFIG_SCSI_MULTI_LUN=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -501,7 +477,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -511,8 +486,10 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -521,6 +498,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -554,37 +532,50 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
 
 #
-# TPM devices
+# I2C Algorithms
 #
-# CONFIG_TCG_TPM is not set
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C support
+# I2C Hardware Bus support
 #
-# CONFIG_I2C is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
 # SPI support
@@ -603,21 +594,25 @@ CONFIG_SPI_ATMEL=y
 # SPI Protocol Masters
 #
 # CONFIG_SPI_AT25 is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Hardware Monitoring support
+# Watchdog Device Drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91SAM9_WATCHDOG=y
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -625,37 +620,28 @@ CONFIG_SPI_ATMEL=y
 # CONFIG_MFD_SM501 is not set
 
 #
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -665,9 +651,16 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # Frame buffer hardware drivers
 #
+# CONFIG_FB_S1D15605 is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_ATMEL=y
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -675,97 +668,97 @@ CONFIG_FB_ATMEL=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
 
 #
 # Sound
 #
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_SEQ_DUMMY=y
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_DEBUG_DETECT=y
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
 
 #
-# ALSA ARM devices
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# SoC audio support
+# USB Gadget Support
 #
-# CONFIG_SND_SOC is not set
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# Open Sound System
+# MMC/SD Card Drivers
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
-# HID Devices
+# MMC/SD Host Controller Drivers
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_MMC_AT91=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
-# USB support
+# RTC interfaces
 #
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# I2C RTC drivers
 #
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
-# USB Gadget Support
+# SPI RTC drivers
 #
-# CONFIG_USB_GADGET is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
 
 #
-# MMC/SD Card support
+# Platform RTC drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91=y
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Real Time Clock
+# on-CPU RTC drivers
 #
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_DRV_AT91SAM9=y
 
 #
 # File systems
@@ -816,7 +809,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -836,20 +828,13 @@ CONFIG_CRAMFS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -890,16 +875,15 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -907,8 +891,8 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -916,6 +900,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -923,10 +910,13 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -937,10 +927,7 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -949,9 +936,12 @@ CONFIG_DEBUG_LL=y
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index baa97698c744..d846a492e5ce 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -714,7 +714,7 @@ CONFIG_I2C_ALGOPCA=m
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=m
+CONFIG_I2C_GPIO=m
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
new file mode 100644
index 000000000000..f3cd4a95373a
--- /dev/null
+++ b/arch/arm/configs/cam60_defconfig
@@ -0,0 +1,1228 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24
+# Thu Mar  6 10:07:26 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+CONFIG_MACH_CAM60=y
+# CONFIG_MACH_SAM9_L9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0x20004000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE="console=ttyS0,115200 noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_NETWORK_SECMARK=y
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RCSIMPLE=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=m
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set
+CONFIG_MTD_NAND_AT91_ECC_HW=y
+# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=y
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_TGT_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+# CONFIG_ICPLUS_PHY is not set
+CONFIG_FIXED_PHY=m
+# CONFIG_FIXED_MII_10_FDX is not set
+# CONFIG_FIXED_MII_100_FDX is not set
+# CONFIG_FIXED_MII_1000_FDX is not set
+CONFIG_FIXED_MII_AMNT=1
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_KEYBOARD_LKKBD=m
+CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_NEWTON=m
+CONFIG_KEYBOARD_STOWAWAY=m
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_TEST=m
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_DRV_AT91SAM9_RTT=0
+CONFIG_RTC_DRV_AT91SAM9_GPBR=0
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_YAFFS_FS=y
+CONFIG_YAFFS_YAFFS1=y
+# CONFIG_YAFFS_9BYTE_TAGS is not set
+# CONFIG_YAFFS_DOES_ECC is not set
+CONFIG_YAFFS_YAFFS2=y
+CONFIG_YAFFS_AUTO_YAFFS2=y
+# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
+# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
+# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set
+CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ABLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+# CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=m
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 88e5d28aeec7..67e65e4f0cdc 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -1,69 +1,96 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 21:51:31 2006
+# Linux kernel version: 2.6.24-rc7
+# Wed Jan  9 22:19:24 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -81,62 +108,101 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
 
 #
-# AT91RM9200 Implementations
+# Boot options
 #
 
 #
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
 # AT91RM9200 Board Type
 #
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 CONFIG_MACH_CSB337=y
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_CHUB is not set
+# CONFIG_MACH_HOMEMATIC is not set
+# CONFIG_MACH_ECBAT91 is not set
+# CONFIG_MACH_SWEDATMS is not set
+
+#
+# AT91 Board Options
+#
 
 #
-# AT91RM9200 Feature Selections
+# AT91 Feature Selections
 #
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ATMEL_TCLIB is not set
+CONFIG_AT91_TIMER_HZ=128
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -145,15 +211,13 @@ CONFIG_CPU_TLB_V4WBI=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -168,8 +232,13 @@ CONFIG_AT91_CF=y
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -178,9 +247,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -191,6 +264,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -215,6 +289,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -227,6 +302,10 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -243,23 +322,26 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -269,13 +351,8 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -285,7 +362,17 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -294,19 +381,14 @@ CONFIG_TCP_CONG_BIC=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -319,11 +401,14 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -349,15 +434,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -368,7 +452,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -378,29 +461,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 # CONFIG_MTD_AT91_DATAFLASH is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -409,13 +478,12 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
 # CONFIG_IDE is not set
 
 #
@@ -423,6 +491,9 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -441,97 +512,61 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -539,26 +574,23 @@ CONFIG_ARM_AT91_ETHER=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -568,6 +600,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -583,6 +616,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -601,152 +635,114 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 CONFIG_AT91_SPI=y
 CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Multimedia devices
+# Watchdog Device Drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -758,12 +754,25 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 
@@ -771,7 +780,7 @@ CONFIG_USB_DEBUG=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -780,9 +789,11 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -801,59 +812,21 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
@@ -866,15 +839,18 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -899,14 +875,20 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
 
 #
@@ -914,16 +896,22 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -934,13 +922,19 @@ CONFIG_USB_EZUSB=y
 # USB Gadget Support
 #
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_GOKU is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_AT91=y
 CONFIG_USB_AT91=y
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
@@ -950,22 +944,28 @@ CONFIG_USB_AT91=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91RM9200=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_AT91 is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -974,39 +974,60 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
 
 #
-# RTC drivers
+# I2C RTC drivers
 #
-# CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1030,11 +1051,12 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1046,7 +1068,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
@@ -1054,10 +1075,7 @@ CONFIG_CRAMFS=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1070,6 +1088,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1077,43 +1096,56 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -1124,12 +1156,13 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1138,7 +1171,15 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1149,20 +1190,27 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index 669f035896f9..99702146c9fc 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -1,69 +1,112 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15
-# Mon Jan  9 21:52:00 2006
+# Linux kernel version: 2.6.25-rc8
+# Fri Apr  4 22:06:15 2008
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-CONFIG_UID16=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -77,66 +120,111 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
 
 #
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
 #
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
 
 #
 # AT91RM9200 Board Type
 #
+# CONFIG_MACH_ONEARM is not set
 # CONFIG_ARCH_AT91RM9200DK is not set
 # CONFIG_MACH_AT91RM9200EK is not set
 # CONFIG_MACH_CSB337 is not set
 CONFIG_MACH_CSB637=y
 # CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
 
 #
-# AT91RM9200 Feature Selections
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
 #
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
 
 #
 # Processor Type
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -145,15 +233,13 @@ CONFIG_CPU_TLB_V4WBI=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -168,8 +254,13 @@ CONFIG_AT91_CF=y
 #
 # Kernel Features
 #
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -178,9 +269,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_LEDS=y
-CONFIG_LEDS_TIMER=y
 CONFIG_LEDS_CPU=y
 CONFIG_ALIGNMENT_TRAP=y
 
@@ -191,6 +286,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -215,6 +311,7 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -227,6 +324,11 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -243,23 +345,26 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -269,13 +374,8 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -283,9 +383,20 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -294,19 +405,14 @@ CONFIG_TCP_CONG_BIC=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -319,11 +425,14 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -349,15 +458,14 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0
-CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -368,7 +476,6 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -377,30 +484,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_AT91_DATAFLASH is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -409,13 +501,15 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -423,6 +517,9 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -441,114 +538,78 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -558,7 +619,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -568,6 +628,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -583,6 +644,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -595,64 +657,29 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
 # CONFIG_SERIAL_ATMEL_TTYAT is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_AT91RM9200_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_AT91RM9200_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
 #
-# Ftape, the floppy tape device driver
-#
-
-#
 # PCMCIA character devices
 #
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-CONFIG_AT91_SPI=y
-CONFIG_AT91_SPIDEV=y
-
-#
-# I2C support
-#
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
@@ -665,43 +692,53 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 
 #
-# Hardware Monitoring support
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -715,39 +752,72 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
 
 #
-# Misc devices
+# Watchdog Device Drivers
 #
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_AT91RM9200_WATCHDOG=y
 
 #
-# Multimedia Capabilities Port drivers
+# USB-based Watchdog Cards
 #
+# CONFIG_USBPCWATCHDOG is not set
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -759,20 +829,34 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
 
@@ -781,9 +865,11 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -802,80 +888,42 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
 # CONFIG_USB_SERIAL_CYPRESS_M8 is not set
 # CONFIG_USB_SERIAL_EMPEG is not set
 CONFIG_USB_SERIAL_FTDI_SIO=y
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -883,6 +931,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -900,46 +949,66 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 CONFIG_USB_SERIAL_MCT_U232=y
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
 
 #
-# USB DSL modem support
+# LED drivers
 #
+CONFIG_LEDS_GPIO=y
 
 #
-# USB Gadget Support
+# LED Triggers
 #
-# CONFIG_USB_GADGET is not set
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
 
 #
-# MMC/SD Card support
+# Userspace I/O
 #
-# CONFIG_MMC is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -948,16 +1017,17 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -979,11 +1049,12 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -995,18 +1066,16 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1019,6 +1088,7 @@ CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1026,45 +1096,57 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1073,12 +1155,14 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1087,7 +1171,18 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
 # CONFIG_CRYPTO_SERPENT is not set
@@ -1098,20 +1193,29 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
new file mode 100644
index 000000000000..90ed214e3673
--- /dev/null
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -0,0 +1,1315 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc4
+# Sat Jun  9 01:30:18 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+# CONFIG_ARCH_AT91RM9200DK is not set
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+# CONFIG_MACH_CHUB is not set
+CONFIG_MACH_ECBAT91=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ATMEL_TCLIB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_AT91_CF=y
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=y
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=y
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=y
+# CONFIG_IEEE80211_CRYPT_CCMP is not set
+# CONFIG_IEEE80211_CRYPT_TKIP is not set
+CONFIG_IEEE80211_SOFTMAC=y
+CONFIG_IEEE80211_SOFTMAC_DEBUG=y
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_AT91RM9200_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_AT91_SPI is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_ATMEL is not set
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_AT91=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+# CONFIG_LEDS_TRIGGERS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+CONFIG_USB_PRINTER=y
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index a0f48d54fbcc..ae51a40db6f9 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -587,14 +587,14 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=y
+CONFIG_I2C_GPIO=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
new file mode 100644
index 000000000000..4d11678584db
--- /dev/null
+++ b/arch/arm/configs/magician_defconfig
@@ -0,0 +1,1182 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Sun Dec 30 13:02:54 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_ARMCORE is not set
+CONFIG_MACH_MAGICIAN=y
+CONFIG_PXA27x=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="keepinitrd"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+CONFIG_APM_EMULATION=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+# CONFIG_IRNET is not set
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+CONFIG_IRDA_DEBUG=y
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_PXA_FICP=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x04000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_PXA27x is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+# CONFIG_SERIAL_PXA_CONSOLE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_DS1WM=y
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+CONFIG_W1_SLAVE_DS2760=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+CONFIG_PDA_POWER=y
+# CONFIG_APM_POWER is not set
+CONFIG_BATTERY_DS2760=y
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_HTC_EGPIO=y
+CONFIG_HTC_PASIC3=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+CONFIG_NEW_LEDS=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_DEBUG=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=m
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ns9xxx_defconfig b/arch/arm/configs/ns9xxx_defconfig
index 0e5794c6a48e..7dc1580e4d99 100644
--- a/arch/arm/configs/ns9xxx_defconfig
+++ b/arch/arm/configs/ns9xxx_defconfig
@@ -1,621 +1,79 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Thu Feb 15 20:51:47 2007
-#
-CONFIG_ARM=y
-# CONFIG_GENERIC_TIME is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
 # CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
 CONFIG_ARCH_NS9XXX=y
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# NS9xxx Implementations
-#
+CONFIG_MACH_A9M9360=y
+CONFIG_MACH_A9M9750=y
+CONFIG_MACH_CC7UCAMRY=y
+CONFIG_MACH_CC9C=y
+CONFIG_MACH_CC9P9210=y
+CONFIG_MACH_CC9P9210JS=y
+CONFIG_MACH_CC9P9215=y
+CONFIG_MACH_CC9P9215JS=y
 CONFIG_MACH_CC9P9360DEV=y
-CONFIG_PROCESSOR_NS9360=y
-CONFIG_BOARD_A9M9750DEV=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
+CONFIG_MACH_CC9P9360JS=y
+CONFIG_MACH_CC9P9360VAL=y
+CONFIG_MACH_CC9P9750DEV=y
+CONFIG_MACH_CC9P9750VAL=y
+CONFIG_MACH_CCW9C=y
+CONFIG_MACH_INC20OTTER=y
+CONFIG_MACH_OTTER=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
+CONFIG_NET=y
+CONFIG_PACKET=m
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_SYN_COOKIES=y
+CONFIG_MTD=m
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NS9XXX_ETH=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_SHARE_IRQ is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
+CONFIG_SERIAL_NS921X=y
+CONFIG_SERIAL_NS921X_CONSOLE=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+CONFIG_ADC_NS9215=m
+CONFIG_I2C=m
+CONFIG_I2C_GPIO=m
 # CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
 # CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_RTC_CLASS=m
+CONFIG_RTC_DRV_NS9215=m
+CONFIG_EXT2_FS=m
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
+CONFIG_JFFS2_FS=m
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 # CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DETECT_SOFTLOCKUP is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_ICEDCC=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index c2345af3707a..323c1deeb953 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Mon Dec 17 20:04:38 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Mar  3 03:39:48 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,17 +41,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -64,17 +70,26 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -102,6 +117,8 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -130,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -139,6 +157,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -155,6 +174,7 @@ CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -266,6 +286,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
+# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -311,9 +332,10 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -330,6 +352,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -384,6 +407,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -421,11 +445,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 CONFIG_ATA_OVER_ETH=m
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -489,6 +515,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -512,7 +539,6 @@ CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLHC=y
 # CONFIG_SLIP_SMART is not set
 # CONFIG_SLIP_MODE_SLIP6 is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -616,12 +642,10 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
@@ -649,6 +673,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -676,6 +701,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -683,6 +709,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -705,6 +732,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -802,10 +830,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -826,12 +850,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -874,8 +896,10 @@ CONFIG_SYSFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -946,9 +970,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -975,6 +996,7 @@ CONFIG_FRAME_POINTER=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -992,6 +1014,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1006,12 +1031,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 
 #
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index d592a6487114..d4ca5e6e4ffa 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Mon Dec 17 21:12:45 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Mar  3 03:35:17 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,6 +21,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -39,17 +40,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,17 +69,26 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -101,6 +116,8 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -129,6 +146,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -138,6 +156,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -154,6 +173,7 @@ CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -173,13 +193,13 @@ CONFIG_ARCH_OMAP16XX=y
 #
 # OMAP Board Type
 #
-# CONFIG_MACH_OMAP_INNOVATOR is not set
-# CONFIG_MACH_OMAP_H2 is not set
-# CONFIG_MACH_OMAP_H3 is not set
+CONFIG_MACH_OMAP_INNOVATOR=y
+CONFIG_MACH_OMAP_H2=y
+CONFIG_MACH_OMAP_H3=y
 CONFIG_MACH_OMAP_OSK=y
 # CONFIG_OMAP_OSK_MISTRAL is not set
-# CONFIG_MACH_NOKIA770 is not set
-# CONFIG_MACH_OMAP_GENERIC is not set
+CONFIG_MACH_NOKIA770=y
+CONFIG_MACH_OMAP_GENERIC=y
 
 #
 # OMAP CPU Speed
@@ -275,6 +295,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
+# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -307,9 +328,10 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -326,6 +348,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -381,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -493,11 +517,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
 CONFIG_BLK_DEV_IDE=m
 
@@ -519,7 +545,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -553,6 +578,7 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -574,7 +600,6 @@ CONFIG_PPP_MULTILINK=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -671,6 +696,7 @@ CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
@@ -698,12 +724,10 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
@@ -731,6 +755,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -758,6 +783,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -765,6 +791,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -780,6 +807,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -865,10 +893,6 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
@@ -889,12 +913,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -948,8 +970,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1019,9 +1043,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1045,7 +1066,51 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
diff --git a/arch/arm/configs/orion_defconfig b/arch/arm/configs/orion5x_defconfig
index 1e5aaa645fcd..52cd99bd52fb 100644
--- a/arch/arm/configs/orion_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -140,7 +140,7 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-CONFIG_ARCH_ORION=y
+CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 3c0c4f192dc1..95a22f512805 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -727,14 +727,14 @@ CONFIG_I2C_CHARDEV=m
 #
 # I2C Algorithms
 #
-# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_ALGOPCF is not set
 # CONFIG_I2C_ALGOPCA is not set
 
 #
 # I2C Hardware Bus support
 #
-CONFIG_I2C_AT91=m
+CONFIG_I2C_GPIO=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
new file mode 100644
index 000000000000..484dc9739dfc
--- /dev/null
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -0,0 +1,1098 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23
+# Sun Oct 14 02:01:07 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+CONFIG_AUDIT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+CONFIG_MACH_SAM9_L9260=y
+
+#
+# AT91 Board Options
+#
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+# CONFIG_ATMEL_TCLIB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200 mem=64M initrd=0x21100000,4194304 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=3
+CONFIG_MTD_UBI_GLUEBI=y
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_DS1553=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
+CONFIG_RTC_DRV_DS1742=y
+CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T59 is not set
+CONFIG_RTC_DRV_V3020=y
+
+#
+# on-CPU RTC drivers
+#
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
new file mode 100644
index 000000000000..576b8339f0d6
--- /dev/null
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -0,0 +1,886 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc7-hammer
+# Thu Mar 27 16:39:48 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+CONFIG_PLAT_S3C24XX=y
+# CONFIG_S3C2410_DMA is not set
+CONFIG_PLAT_S3C=y
+CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
+CONFIG_CPU_LLSERIAL_S3C2410=y
+
+#
+# Boot options
+#
+# CONFIG_S3C_BOOT_ERROR_RESET is not set
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=0
+
+#
+# S3C2400 Machines
+#
+CONFIG_CPU_S3C2410=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+# CONFIG_ARCH_SMDK2410 is not set
+# CONFIG_ARCH_H1940 is not set
+# CONFIG_MACH_N30 is not set
+# CONFIG_ARCH_BAST is not set
+# CONFIG_MACH_OTOM is not set
+# CONFIG_MACH_AML_M5900 is not set
+CONFIG_MACH_TCT_HAMMER=y
+# CONFIG_MACH_VR1000 is not set
+# CONFIG_MACH_QT2410 is not set
+
+#
+# S3C2412 Machines
+#
+# CONFIG_MACH_SMDK2413 is not set
+# CONFIG_MACH_SMDK2412 is not set
+# CONFIG_MACH_VSTMS is not set
+
+#
+# S3C2440 Machines
+#
+# CONFIG_MACH_ANUBIS is not set
+# CONFIG_MACH_OSIRIS is not set
+# CONFIG_MACH_RX3715 is not set
+# CONFIG_ARCH_S3C2440 is not set
+# CONFIG_MACH_NEXCODER_2440 is not set
+
+#
+# S3C2442 Machines
+#
+
+#
+# S3C2443 Machines
+#
+# CONFIG_MACH_SMDK2443 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=200
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M root=/dev/ram0 init=/linuxrc rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+# CONFIG_INET is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=10240
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_NETDEVICES is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_S3C2410=y
+CONFIG_SERIAL_S3C2410_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+CONFIG_USB_GADGET_S3C2410=y
+CONFIG_USB_S3C2410=y
+# CONFIG_USB_S3C2410_DEBUG is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_SYSCTL is not set
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_S3C_PORT is not set
+CONFIG_DEBUG_S3C_UART=0
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
new file mode 100644
index 000000000000..26de37f74686
--- /dev/null
+++ b/arch/arm/configs/yl9200_defconfig
@@ -0,0 +1,1216 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc6
+# Fri Jan 11 09:53:59 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91RM9200 Board Type
+#
+# CONFIG_MACH_ONEARM is not set
+CONFIG_ARCH_AT91RM9200DK=y
+# CONFIG_MACH_AT91RM9200EK is not set
+# CONFIG_MACH_CSB337 is not set
+# CONFIG_MACH_CSB637 is not set
+# CONFIG_MACH_CARMEVA is not set
+# CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
+# CONFIG_MACH_PICOTUX2XX is not set
+# CONFIG_MACH_KAFA is not set
+CONFIG_MACH_YL9200=y
+
+#
+# AT91 Board Options
+#
+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set
+
+#
+# AT91 Feature Selections
+#
+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+CONFIG_MTD_PLATRAM=y
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_AT91=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=3
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_S1D135XX=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+CONFIG_USB_GADGET_M66592=y
+CONFIG_USB_M66592=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=y
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+CONFIG_MMC_DEBUG=y
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_GPIO=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_AT91RM9200=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=1
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_DEBUG_KOBJECT=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 00d44c6fbfe9..ad455ff5aebe 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -7,7 +7,7 @@ AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
 # Object file lists.
 
 obj-y		:= compat.o entry-armv.o entry-common.o irq.o \
-		   process.o ptrace.o semaphore.o setup.o signal.o \
+		   process.o ptrace.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
@@ -22,6 +22,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
+obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 3278e713c32a..0a0d2479274b 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -58,6 +58,9 @@ int main(void)
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
   DEFINE(TI_VFPSTATE,		offsetof(struct thread_info, vfpstate));
+#ifdef CONFIG_ARM_THUMBEE
+  DEFINE(TI_THUMBEE_STATE,	offsetof(struct thread_info, thumbee_state));
+#endif
 #ifdef CONFIG_IWMMXT
   DEFINE(TI_IWMMXT_STATE,	offsetof(struct thread_info, fpstate.iwmmxt));
 #endif
@@ -108,5 +111,12 @@ int main(void)
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
   DEFINE(PROCINFO_MM_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
   DEFINE(PROCINFO_IO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_io_mmu_flags));
+  BLANK();
+#ifdef MULTI_DABORT
+  DEFINE(PROCESSOR_DABT_FUNC,	offsetof(struct processor, _data_abort));
+#endif
+#ifdef MULTI_PABORT
+  DEFINE(PROCESSOR_PABT_FUNC,	offsetof(struct processor, _prefetch_abort));
+#endif
   return 0; 
 }
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 283e14fff993..30a67a5a40a8 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -336,7 +336,7 @@
 		CALL(sys_mknodat)
 /* 325 */	CALL(sys_fchownat)
 		CALL(sys_futimesat)
-		CALL(sys_fstatat64)
+		CALL(ABI(sys_fstatat64,  sys_oabi_fstatat64))
 		CALL(sys_unlinkat)
 		CALL(sys_renameat)
 /* 330 */	CALL(sys_linkat)
@@ -359,9 +359,11 @@
 		CALL(sys_kexec_load)
 		CALL(sys_utimensat)
 		CALL(sys_signalfd)
-/* 350 */	CALL(sys_ni_syscall)
+/* 350 */	CALL(sys_timerfd_create)
 		CALL(sys_eventfd)
 		CALL(sys_fallocate)
+		CALL(sys_timerfd_settime)
+		CALL(sys_timerfd_gettime)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index a46d5b456765..7dca225752c1 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -166,12 +166,12 @@ __dabt_svc:
 	@ The abort handler must return the aborted address in r0, and
 	@ the fault status register in r1.  r9 must be preserved.
 	@
-#ifdef MULTI_ABORT
+#ifdef MULTI_DABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
-	ldr	pc, [r4]
+	ldr	pc, [r4, #PROCESSOR_DABT_FUNC]
 #else
-	bl	CPU_ABORT_HANDLER
+	bl	CPU_DABORT_HANDLER
 #endif
 
 	@
@@ -209,14 +209,12 @@ __irq_svc:
 
 	irq_handler
 #ifdef CONFIG_PREEMPT
+	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
 	ldr	r0, [tsk, #TI_FLAGS]		@ get flags
+	teq	r8, #0				@ if preempt count != 0
+	movne	r0, #0				@ force flags to 0
 	tst	r0, #_TIF_NEED_RESCHED
 	blne	svc_preempt
-preempt_return:
-	ldr	r0, [tsk, #TI_PREEMPT]		@ read preempt value
-	str	r8, [tsk, #TI_PREEMPT]		@ restore preempt count
-	teq	r0, r7
-	strne	r0, [r0, -r0]			@ bug()
 #endif
 	ldr	r0, [sp, #S_PSR]		@ irqs are already disabled
 	msr	spsr_cxsf, r0
@@ -230,19 +228,11 @@ preempt_return:
 
 #ifdef CONFIG_PREEMPT
 svc_preempt:
-	teq	r8, #0				@ was preempt count = 0
-	ldreq	r6, .LCirq_stat
-	movne	pc, lr				@ no
-	ldr	r0, [r6, #4]			@ local_irq_count
-	ldr	r1, [r6, #8]			@ local_bh_count
-	adds	r0, r0, r1
-	movne	pc, lr
-	mov	r7, #0				@ preempt_schedule_irq
-	str	r7, [tsk, #TI_PREEMPT]		@ expects preempt_count == 0
+	mov	r8, lr
 1:	bl	preempt_schedule_irq		@ irq en/disable is done inside
 	ldr	r0, [tsk, #TI_FLAGS]		@ get new tasks TI_FLAGS
 	tst	r0, #_TIF_NEED_RESCHED
-	beq	preempt_return			@ go again
+	moveq	pc, r8				@ go again
 	b	1b
 #endif
 
@@ -293,7 +283,6 @@ __pabt_svc:
 	mrs	r9, cpsr
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
-	msr	cpsr_c, r9
 
 	@
 	@ set args, then call main handler
@@ -301,7 +290,15 @@ __pabt_svc:
 	@  r0 - address of faulting instruction
 	@  r1 - pointer to registers on stack
 	@
-	mov	r0, r2				@ address (pc)
+#ifdef MULTI_PABORT
+	mov	r0, r2			@ pass address of aborted instruction.
+	ldr	r4, .LCprocfns
+	mov	lr, pc
+	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
+#else
+	CPU_PABORT_HANDLER(r0, r2)
+#endif
+	msr	cpsr_c, r9			@ Maybe enable interrupts
 	mov	r1, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
@@ -320,16 +317,12 @@ __pabt_svc:
 	.align	5
 .LCcralign:
 	.word	cr_alignment
-#ifdef MULTI_ABORT
+#ifdef MULTI_DABORT
 .LCprocfns:
 	.word	processor
 #endif
 .LCfp:
 	.word	fp_enter
-#ifdef CONFIG_PREEMPT
-.LCirq_stat:
-	.word	irq_stat
-#endif
 
 /*
  * User mode handlers
@@ -404,12 +397,12 @@ __dabt_usr:
 	@ The abort handler must return the aborted address in r0, and
 	@ the fault status register in r1.
 	@
-#ifdef MULTI_ABORT
+#ifdef MULTI_DABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
-	ldr	pc, [r4]
+	ldr	pc, [r4, #PROCESSOR_DABT_FUNC]
 #else
-	bl	CPU_ABORT_HANDLER
+	bl	CPU_DABORT_HANDLER
 #endif
 
 	@
@@ -455,10 +448,6 @@ __irq_usr:
 __und_usr:
 	usr_entry
 
-	tst	r3, #PSR_T_BIT			@ Thumb mode?
-	bne	__und_usr_unknown		@ ignore FP
-	sub	r4, r2, #4
-
 	@
 	@ fall through to the emulation code, which returns using r9 if
 	@ it has emulated the instruction, or the more conventional lr
@@ -468,7 +457,24 @@ __und_usr:
 	@
 	adr	r9, ret_from_exception
 	adr	lr, __und_usr_unknown
-1:	ldrt	r0, [r4]
+	tst	r3, #PSR_T_BIT			@ Thumb mode?
+	subeq	r4, r2, #4			@ ARM instr at LR - 4
+	subne	r4, r2, #2			@ Thumb instr at LR - 2
+1:	ldreqt	r0, [r4]
+	beq	call_fpe
+	@ Thumb instruction
+#if __LINUX_ARM_ARCH__ >= 7
+2:	ldrht	r5, [r4], #2
+	and	r0, r5, #0xf800			@ mask bits 111x x... .... ....
+	cmp	r0, #0xe800			@ 32bit instruction if xx != 0
+	blo	__und_usr_unknown
+3:	ldrht	r0, [r4]
+	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
+	orr	r0, r0, r5, lsl #16
+#else
+	b	__und_usr_unknown
+#endif
+
 	@
 	@ fallthrough to call_fpe
 	@
@@ -477,10 +483,14 @@ __und_usr:
  * The out of line fixup for the ldrt above.
  */
 	.section .fixup, "ax"
-2:	mov	pc, r9
+4:	mov	pc, r9
 	.previous
 	.section __ex_table,"a"
-	.long	1b, 2b
+	.long	1b, 4b
+#if __LINUX_ARM_ARCH__ >= 7
+	.long	2b, 4b
+	.long	3b, 4b
+#endif
 	.previous
 
 /*
@@ -507,9 +517,16 @@ __und_usr:
  *  r10 = this threads thread_info structure.
  *  lr  = unrecognised instruction return address
  */
+	@
+	@ Fall-through from Thumb-2 __und_usr
+	@
+#ifdef CONFIG_NEON
+	adr	r6, .LCneon_thumb_opcodes
+	b	2f
+#endif
 call_fpe:
 #ifdef CONFIG_NEON
-	adr	r6, .LCneon_opcodes
+	adr	r6, .LCneon_arm_opcodes
 2:
 	ldr	r7, [r6], #4			@ mask value
 	cmp	r7, #0				@ end mask?
@@ -526,6 +543,7 @@ call_fpe:
 1:
 #endif
 	tst	r0, #0x08000000			@ only CDP/CPRT/LDC/STC have bit 27
+	tstne	r0, #0x04000000			@ bit 26 set on both ARM and Thumb-2
 #if defined(CONFIG_CPU_ARM610) || defined(CONFIG_CPU_ARM710)
 	and	r8, r0, #0x0f000000		@ mask out op-code bits
 	teqne	r8, #0x0f000000			@ SWI (ARM6/7 bug)?
@@ -577,7 +595,7 @@ call_fpe:
 #ifdef CONFIG_NEON
 	.align	6
 
-.LCneon_opcodes:
+.LCneon_arm_opcodes:
 	.word	0xfe000000			@ mask
 	.word	0xf2000000			@ opcode
 
@@ -586,6 +604,16 @@ call_fpe:
 
 	.word	0x00000000			@ mask
 	.word	0x00000000			@ opcode
+
+.LCneon_thumb_opcodes:
+	.word	0xef000000			@ mask
+	.word	0xef000000			@ opcode
+
+	.word	0xff100000			@ mask
+	.word	0xf9000000			@ opcode
+
+	.word	0x00000000			@ mask
+	.word	0x00000000			@ opcode
 #endif
 
 do_fpe:
@@ -619,8 +647,15 @@ __und_usr_unknown:
 __pabt_usr:
 	usr_entry
 
+#ifdef MULTI_PABORT
+	mov	r0, r2			@ pass address of aborted instruction.
+	ldr	r4, .LCprocfns
+	mov	lr, pc
+	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
+#else
+	CPU_PABORT_HANDLER(r0, r2)
+#endif
 	enable_irq				@ Enable interrupts
-	mov	r0, r2				@ address (pc)
 	mov	r1, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 	/* fall through */
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 6c90c50a9ee3..597ed00a08d8 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -352,6 +352,11 @@ sys_mmap2:
 		b	do_mmap2
 #endif
 
+ENTRY(pabort_ifar)
+		mrc	p15, 0, r0, cr6, cr0, 2
+ENTRY(pabort_noifar)
+		mov	pc, lr
+
 #ifdef CONFIG_OABI_COMPAT
 
 /*
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 024a9cf469b4..7e9c00a8a412 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -11,6 +11,9 @@
  *
  */
 
+#define ATAG_CORE 0x54410001
+#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+
 	.type	__switch_data, %object
 __switch_data:
 	.long	__mmap_switched
@@ -72,8 +75,13 @@ __error_p:
 #ifdef CONFIG_DEBUG_LL
 	adr	r0, str_p1
 	bl	printascii
+	mov	r0, r9
+	bl	printhex8
+	adr	r0, str_p2
+	bl	printascii
 	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant.\n"
+str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant (0x"
+str_p2:	.asciz	").\n"
 	.align
 #endif
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 7898cbc9861a..bff4c6e90dd5 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -29,9 +29,6 @@
 #define KERNEL_RAM_VADDR	(PAGE_OFFSET + TEXT_OFFSET)
 #define KERNEL_RAM_PADDR	(PHYS_OFFSET + TEXT_OFFSET)
 
-#define ATAG_CORE 0x54410001
-#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
-
 
 /*
  * swapper_pg_dir is the virtual address of the initial page table.
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index a22a98c43ca5..13e371aad879 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -431,6 +431,11 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
+int __kprobes arch_trampoline_kprobe(struct kprobe *p)
+{
+	return 0;
+}
+
 static struct undef_hook kprobes_break_hook = {
 	.instr_mask	= 0xffffffff,
 	.instr_val	= KPROBE_BREAKPOINT_INSTRUCTION,
diff --git a/arch/arm/kernel/semaphore.c b/arch/arm/kernel/semaphore.c
deleted file mode 100644
index 981fe5c6ccbe..000000000000
--- a/arch/arm/kernel/semaphore.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- *  ARM semaphore implementation, taken from
- *
- *  i386 semaphore implementation.
- *
- *  (C) Copyright 1999 Linus Torvalds
- *
- *  Modified for ARM by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- *  - only on a boundary condition do we need to care. When we go
- *    from a negative count to a non-negative, we wake people up.
- *  - when we go from a non-negative count to a negative do we
- *    (a) synchronize with the "sleeper" count and (b) make sure
- *    that we're on the wakeup list before we synchronize so that
- *    we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
-	wake_up(&sem->wait);
-}
-
-static DEFINE_SPINLOCK(semaphore_lock);
-
-void __sched __down(struct semaphore * sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	spin_lock_irq(&semaphore_lock);
-	sem->sleepers++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irq(&semaphore_lock);
-
-		schedule();
-		tsk->state = TASK_UNINTERRUPTIBLE;
-		spin_lock_irq(&semaphore_lock);
-	}
-	spin_unlock_irq(&semaphore_lock);
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-	wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	tsk->state = TASK_INTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	spin_lock_irq(&semaphore_lock);
-	sem->sleepers ++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * With signals pending, this turns into
-		 * the trylock failure case - we won't be
-		 * sleeping, and we* can't get the lock as
-		 * it has contention. Just correct the count
-		 * and exit.
-		 */
-		if (signal_pending(current)) {
-			retval = -EINTR;
-			sem->sleepers = 0;
-			atomic_add(sleepers, &sem->count);
-			break;
-		}
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock. The
-		 * "-1" is because we're still hoping to get
-		 * the lock.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irq(&semaphore_lock);
-
-		schedule();
-		tsk->state = TASK_INTERRUPTIBLE;
-		spin_lock_irq(&semaphore_lock);
-	}
-	spin_unlock_irq(&semaphore_lock);
-	tsk->state = TASK_RUNNING;
-	remove_wait_queue(&sem->wait, &wait);
-	wake_up(&sem->wait);
-	return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-int __down_trylock(struct semaphore * sem)
-{
-	int sleepers;
-	unsigned long flags;
-
-	spin_lock_irqsave(&semaphore_lock, flags);
-	sleepers = sem->sleepers + 1;
-	sem->sleepers = 0;
-
-	/*
-	 * Add "everybody else" and us into it. They aren't
-	 * playing, because we own the spinlock.
-	 */
-	if (!atomic_add_negative(sleepers, &sem->count))
-		wake_up(&sem->wait);
-
-	spin_unlock_irqrestore(&semaphore_lock, flags);
-	return 1;
-}
-
-/*
- * The semaphore operations have a special calling sequence that
- * allow us to do a simpler in-line version of them. These routines
- * need to convert that sequence back into the C sequence when
- * there is contention on the semaphore.
- *
- * ip contains the semaphore pointer on entry. Save the C-clobbered
- * registers (r0 to r3 and lr), but not ip, as we use it as a return
- * value in some cases..
- * To remain AAPCS compliant (64-bit stack align) we save r4 as well.
- */
-asm("	.section .sched.text,\"ax\",%progbits	\n\
-	.align	5				\n\
-	.globl	__down_failed			\n\
-__down_failed:					\n\
-	stmfd	sp!, {r0 - r4, lr}		\n\
-	mov	r0, ip				\n\
-	bl	__down				\n\
-	ldmfd	sp!, {r0 - r4, pc}		\n\
-						\n\
-	.align	5				\n\
-	.globl	__down_interruptible_failed	\n\
-__down_interruptible_failed:			\n\
-	stmfd	sp!, {r0 - r4, lr}		\n\
-	mov	r0, ip				\n\
-	bl	__down_interruptible		\n\
-	mov	ip, r0				\n\
-	ldmfd	sp!, {r0 - r4, pc}		\n\
-						\n\
-	.align	5				\n\
-	.globl	__down_trylock_failed		\n\
-__down_trylock_failed:				\n\
-	stmfd	sp!, {r0 - r4, lr}		\n\
-	mov	r0, ip				\n\
-	bl	__down_trylock			\n\
-	mov	ip, r0				\n\
-	ldmfd	sp!, {r0 - r4, pc}		\n\
-						\n\
-	.align	5				\n\
-	.globl	__up_wakeup			\n\
-__up_wakeup:					\n\
-	stmfd	sp!, {r0 - r4, lr}		\n\
-	mov	r0, ip				\n\
-	bl	__up				\n\
-	ldmfd	sp!, {r0 - r4, pc}		\n\
-	");
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_interruptible_failed);
-EXPORT_SYMBOL(__down_trylock_failed);
-EXPORT_SYMBOL(__up_wakeup);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 54cdf1aeefc3..ef2f86a5e78a 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -26,8 +26,8 @@
 /*
  * For ARM syscalls, we encode the syscall number into the instruction.
  */
-#define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn))
-#define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn))
+#define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 
 /*
  * With EABI, the syscall number has to be loaded into r7.
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index e8b98046895b..96ab5f52949c 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -25,6 +25,7 @@
  * sys_stat64:
  * sys_lstat64:
  * sys_fstat64:
+ * sys_fstatat64:
  *
  *   struct stat64 has different sizes and some members are shifted
  *   Compatibility wrappers are needed for them and provided below.
@@ -169,6 +170,29 @@ asmlinkage long sys_oabi_fstat64(unsigned long fd,
 	return error;
 }
 
+asmlinkage long sys_oabi_fstatat64(int dfd,
+				   char __user *filename,
+				   struct oldabi_stat64  __user *statbuf,
+				   int flag)
+{
+	struct kstat stat;
+	int error = -EINVAL;
+
+	if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+		goto out;
+
+	if (flag & AT_SYMLINK_NOFOLLOW)
+		error = vfs_lstat_fd(dfd, filename, &stat);
+	else
+		error = vfs_stat_fd(dfd, filename, &stat);
+
+	if (!error)
+	error = cp_oldabi_stat64(&stat, statbuf);
+
+out:
+	return error;
+}
+
 struct oabi_flock64 {
 	short	l_type;
 	short	l_whence;
diff --git a/arch/arm/kernel/thumbee.c b/arch/arm/kernel/thumbee.c
new file mode 100644
index 000000000000..df3f6b7ebcea
--- /dev/null
+++ b/arch/arm/kernel/thumbee.c
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/kernel/thumbee.c
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/thread_notify.h>
+
+/*
+ * Access to the ThumbEE Handler Base register
+ */
+static inline unsigned long teehbr_read()
+{
+	unsigned long v;
+	asm("mrc	p14, 6, %0, c1, c0, 0\n" : "=r" (v));
+	return v;
+}
+
+static inline void teehbr_write(unsigned long v)
+{
+	asm("mcr	p14, 6, %0, c1, c0, 0\n" : : "r" (v));
+}
+
+static int thumbee_notifier(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		thread->thumbee_state = 0;
+		break;
+	case THREAD_NOTIFY_SWITCH:
+		current_thread_info()->thumbee_state = teehbr_read();
+		teehbr_write(thread->thumbee_state);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block thumbee_notifier_block = {
+	.notifier_call	= thumbee_notifier,
+};
+
+static int __init thumbee_init(void)
+{
+	unsigned long pfr0;
+	unsigned int cpu_arch = cpu_architecture();
+
+	if (cpu_arch < CPU_ARCH_ARMv7)
+		return 0;
+
+	/* processor feature register 0 */
+	asm("mrc	p15, 0, %0, c0, c1, 0\n" : "=r" (pfr0));
+	if ((pfr0 & 0x0000f000) != 0x00001000)
+		return 0;
+
+	printk(KERN_INFO "ThumbEE CPU extension supported.\n");
+	elf_hwcap |= HWCAP_THUMBEE;
+	thread_register_notifier(&thumbee_notifier_block);
+
+	return 0;
+}
+
+late_initcall(thumbee_init);
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
index 74aa7a39bb68..e10ee158d720 100644
--- a/arch/arm/mach-aaec2000/clock.c
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -18,8 +18,6 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
-#include <asm/semaphore.h>
-
 #include "clock.h"
 
 static LIST_HEAD(clocks);
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 074dcd5d9a7e..0fc07b6db749 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -12,18 +12,28 @@ config ARCH_AT91RM9200
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 
 config ARCH_AT91X40
 	bool "AT91x40"
@@ -109,6 +119,13 @@ config MACH_KAFA
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
+config MACH_ECBAT91
+	bool "emQbit ECB_AT91 SBC"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using emQbit's ECB_AT91 board.
+	  <http://wiki.emqbit.com/free-ecb-at91>
+
 endif
 
 # ----------------------------------------------------------
@@ -133,6 +150,20 @@ config MACH_AT91SAM9260EK
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
+config MACH_CAM60
+	bool "KwikByte KB9260 (CAM60) board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
+	  <http://www.kwikbyte.com/KB9260.html>
+
+config MACH_SAM9_L9260
+	bool "Olimex SAM9-L9260 board"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
+	  <http://www.olimex.com/dev/sam9-L9260.html>
+
 endif
 
 # ----------------------------------------------------------
@@ -216,7 +247,7 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91CAP9ADK || MACH_SAM9_L9260 || MACH_ECBAT91)
 	help
 	  Enable support for the DataFlash card.
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf5f293dccf8..8d9bc0153b18 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -29,9 +29,12 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
 obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
+obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
+obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
+obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 48d27d8000b0..933fa8f55cbc 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -13,12 +13,14 @@
  */
 
 #include <linux/module.h>
+#include <linux/pm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/at91cap9.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -288,6 +290,12 @@ static void at91cap9_reset(void)
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
+static void at91cap9_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
+
 /* --------------------------------------------------------------------
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
@@ -298,6 +306,7 @@ void __init at91cap9_initialize(unsigned long main_clock)
 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
 
 	at91_arch_reset = at91cap9_reset;
+	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 
 	/* Init clock subsystem */
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index c50fad9cd143..f1a80d74a4b6 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -16,15 +16,15 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
+#include <linux/i2c-gpio.h>
 
 #include <video/atmel_lcdc.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91cap9.h>
-#include <asm/arch/at91sam926x_mc.h>
 #include <asm/arch/at91cap9_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -283,10 +283,15 @@ static struct at91_nand_data nand_data;
 #define NAND_BASE	AT91_CHIPSELECT_3
 
 static struct resource nand_resources[] = {
-	{
+	[0] = {
 		.start	= NAND_BASE,
 		.end	= NAND_BASE + SZ_256M - 1,
 		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -344,6 +349,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 void __init at91_add_device_nand(struct at91_nand_data *data) {}
 #endif
 
+
 /* --------------------------------------------------------------------
  *  TWI (i2c)
  * -------------------------------------------------------------------- */
@@ -532,13 +538,59 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_TCB0,
+		.end	= AT91CAP9_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_TCB,
+		.end	= AT91CAP9_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all three TC channels */
+	at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
+	platform_device_register(&at91cap9_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
+static struct resource rtt_resources[] = {
+	{
+		.start	= AT91_BASE_SYS + AT91_RTT,
+		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
 static struct platform_device at91cap9_rtt_device = {
 	.name		= "at91_rtt",
-	.id		= -1,
-	.num_resources	= 0,
+	.id		= 0,
+	.resource	= rtt_resources,
+	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
 
 static void __init at91_add_device_rtt(void)
@@ -990,7 +1042,7 @@ static inline void configure_usart2_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
@@ -1031,8 +1083,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1043,6 +1093,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
@@ -1060,6 +1113,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }
 
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index ef6aeb86e980..de19bee83f75 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -577,6 +577,90 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb0_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_TCB0,
+		.end	= AT91RM9200_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_TC0,
+		.end	= AT91RM9200_ID_TC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91RM9200_ID_TC1,
+		.end	= AT91RM9200_ID_TC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91RM9200_ID_TC2,
+		.end	= AT91RM9200_ID_TC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb0_resources,
+	.num_resources	= ARRAY_SIZE(tcb0_resources),
+};
+
+static struct resource tcb1_resources[] = {
+	[0] = {
+		.start	= AT91RM9200_BASE_TCB1,
+		.end	= AT91RM9200_BASE_TCB1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91RM9200_ID_TC3,
+		.end	= AT91RM9200_ID_TC3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91RM9200_ID_TC4,
+		.end	= AT91RM9200_ID_TC4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91RM9200_ID_TC5,
+		.end	= AT91RM9200_ID_TC5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91rm9200_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= tcb1_resources,
+	.num_resources	= ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has a separate clock and irq for each TC channel */
+	at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
+	at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
+	platform_device_register(&at91rm9200_tcb0_device);
+
+	at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
+	at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
+	platform_device_register(&at91rm9200_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
 
@@ -1019,7 +1103,7 @@ static inline void configure_usart3_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PB0, 0);	/* RTS3 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init __deprecated at91_init_serial(struct at91_uart_config *config)
@@ -1110,8 +1194,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1122,6 +1204,9 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
 void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
@@ -1141,6 +1226,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtc();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }
 
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 18d06612ce8a..ee26550cdc21 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/pm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -18,6 +19,7 @@
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -267,6 +269,11 @@ static void at91sam9260_reset(void)
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
+static void at91sam9260_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
 
 /* --------------------------------------------------------------------
  *  AT91SAM9260 processor initialization
@@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsigned long main_clock)
 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
 
 	at91_arch_reset = at91sam9260_reset;
+	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 105f8403860b..393a32aefce5 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -19,8 +19,8 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam926x_mc.h>
 #include <asm/arch/at91sam9260_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -288,10 +288,15 @@ static struct at91_nand_data nand_data;
 #define NAND_BASE	AT91_CHIPSELECT_3
 
 static struct resource nand_resources[] = {
-	{
+	[0] = {
 		.start	= NAND_BASE,
 		.end	= NAND_BASE + SZ_256M - 1,
 		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter blocks
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb0_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_TCB0,
+		.end	= AT91SAM9260_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_TC0,
+		.end	= AT91SAM9260_ID_TC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91SAM9260_ID_TC1,
+		.end	= AT91SAM9260_ID_TC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91SAM9260_ID_TC2,
+		.end	= AT91SAM9260_ID_TC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_tcb0_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb0_resources,
+	.num_resources	= ARRAY_SIZE(tcb0_resources),
+};
+
+static struct resource tcb1_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_TCB1,
+		.end	= AT91SAM9260_BASE_TCB1 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_TC3,
+		.end	= AT91SAM9260_ID_TC3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91SAM9260_ID_TC4,
+		.end	= AT91SAM9260_ID_TC4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91SAM9260_ID_TC5,
+		.end	= AT91SAM9260_ID_TC5,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= tcb1_resources,
+	.num_resources	= ARRAY_SIZE(tcb1_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has a separate clock and irq for each TC channel */
+	at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
+	at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
+	at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
+	platform_device_register(&at91sam9260_tcb0_device);
+
+	at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
+	at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
+	at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
+	platform_device_register(&at91sam9260_tcb1_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
@@ -553,7 +642,7 @@ static struct resource rtt_resources[] = {
 
 static struct platform_device at91sam9260_rtt_device = {
 	.name		= "at91_rtt",
-	.id		= -1,
+	.id		= 0,
 	.resource	= rtt_resources,
 	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
@@ -962,64 +1051,9 @@ static inline void configure_usart5_pins(void)
 	at91_set_A_periph(AT91_PIN_PB13, 0);		/* RXD5 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
-				at91_uarts[i] = &at91sam9260_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9260_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91sam9260_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins(0);
-				at91_uarts[i] = &at91sam9260_uart3_device;
-				at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_usart4_pins();
-				at91_uarts[i] = &at91sam9260_uart4_device;
-				at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart");
-				break;
-			case 5:
-				configure_usart5_pins();
-				at91_uarts[i] = &at91sam9260_uart5_device;
-				at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart");
-				break;
-			case 6:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9260_dbgu_device;
-				at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -1073,8 +1107,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1085,9 +1117,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
@@ -1103,6 +1137,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 90b87e1877d9..35bf6fd52516 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -11,12 +11,14 @@
  */
 
 #include <linux/module.h>
+#include <linux/pm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/at91sam9261.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -245,6 +247,11 @@ static void at91sam9261_reset(void)
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
+static void at91sam9261_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
 
 /* --------------------------------------------------------------------
  *  AT91SAM9261 processor initialization
@@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
 	at91_arch_reset = at91sam9261_reset;
+	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);
 
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 245641263fce..37cd547855b1 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,7 +24,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9261.h>
 #include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT91SAM9261_BASE_TCB0,
+		.end	= AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9261_ID_TC0,
+		.end	= AT91SAM9261_ID_TC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91SAM9261_ID_TC1,
+		.end	= AT91SAM9261_ID_TC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91SAM9261_ID_TC2,
+		.end	= AT91SAM9261_ID_TC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9261_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has a separate clock and irq for each TC channel */
+	at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
+	at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
+	at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
+	platform_device_register(&at91sam9261_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
@@ -561,7 +610,7 @@ static struct resource rtt_resources[] = {
 
 static struct platform_device at91sam9261_rtt_device = {
 	.name		= "at91_rtt",
-	.id		= -1,
+	.id		= 0,
 	.resource	= rtt_resources,
 	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
@@ -938,49 +987,9 @@ static inline void configure_usart2_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PA16, 0);	/* CTS2 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9261_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(0);
-				at91_uarts[i] = &at91sam9261_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91sam9261_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9261_dbgu_device;
-				at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -1019,8 +1028,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1031,9 +1038,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
@@ -1050,6 +1059,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index a53ba0f74351..052074a9f2d3 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -11,12 +11,14 @@
  */
 
 #include <linux/module.h>
+#include <linux/pm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/at91sam9263.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -271,6 +273,11 @@ static void at91sam9263_reset(void)
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
+static void at91sam9263_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
 
 /* --------------------------------------------------------------------
  *  AT91SAM9263 processor initialization
@@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsigned long main_clock)
 	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
 
 	at91_arch_reset = at91sam9263_reset;
+	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
 	/* Init clock subsystem */
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 0b12e1adcc8e..b6454c525962 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -22,8 +22,8 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam926x_mc.h>
 #include <asm/arch/at91sam9263_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data;
 #define NAND_BASE	AT91_CHIPSELECT_3
 
 static struct resource nand_resources[] = {
-	{
+	[0] = {
 		.start	= NAND_BASE,
 		.end	= NAND_BASE + SZ_256M - 1,
 		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC0,
+		.end	= AT91_BASE_SYS + AT91_ECC0 + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_TCB0,
+		.end	= AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_TCB,
+		.end	= AT91SAM9263_ID_TCB,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has one clock and irq for all three TC channels */
+	at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
+	platform_device_register(&at91sam9263_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
@@ -933,9 +975,6 @@ static inline void configure_ssc1_pins(unsigned pins)
 }
 
 /*
- * Return the device node so that board init code can use it as the
- * parent for the device node reflecting how it's used on this board.
- *
  * SSC controllers are accessed through library code, instead of any
  * kind of all-singing/all-dancing driver.  For example one could be
  * used by a particular I2S audio codec's driver, while another one
@@ -1146,49 +1185,9 @@ static inline void configure_usart2_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9263_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9263_dbgu_device;
-				at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -1227,8 +1226,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -1239,9 +1236,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
@@ -1257,6 +1256,7 @@ static int __init at91_add_standard_devices(void)
 {
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index e38d23770992..5cecbd7de6a6 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -1,23 +1,20 @@
 /*
- * linux/arch/arm/mach-at91/at91sam926x_time.c
+ * at91sam926x_time.c - Periodic Interval Timer (PIT) for at91sam926x
  *
  * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
  * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
+ * Converted to ClockSource/ClockEvents by David Brownell.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/clockchips.h>
 
-#include <asm/hardware.h>
-#include <asm/io.h>
 #include <asm/mach/time.h>
 
 #include <asm/arch/at91_pit.h>
@@ -26,85 +23,167 @@
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
 #define PIT_PICNT(x)	(((x) & AT91_PIT_PICNT) >> 20)
 
+static u32 pit_cycle;		/* write-once */
+static u32 pit_cnt;		/* access only w/system irq blocked */
+
+
 /*
- * Returns number of microseconds since last timer interrupt.  Note that interrupts
- * will have been disabled by do_gettimeofday()
- *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
+ * Clocksource:  just a monotonic counter of MCK/16 cycles.
+ * We don't care whether or not PIT irqs are enabled.
  */
-static unsigned long at91sam926x_gettimeoffset(void)
+static cycle_t read_pit_clk(void)
 {
-	unsigned long elapsed;
-	unsigned long t = at91_sys_read(AT91_PIT_PIIR);
+	unsigned long flags;
+	u32 elapsed;
+	u32 t;
+
+	raw_local_irq_save(flags);
+	elapsed = pit_cnt;
+	t = at91_sys_read(AT91_PIT_PIIR);
+	raw_local_irq_restore(flags);
+
+	elapsed += PIT_PICNT(t) * pit_cycle;
+	elapsed += PIT_CPIV(t);
+	return elapsed;
+}
+
+static struct clocksource pit_clk = {
+	.name		= "pit",
+	.rating		= 175,
+	.read		= read_pit_clk,
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
 
-	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
 
-	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
+/*
+ * Clockevent device:  interrupts every 1/HZ (== pit_cycles * MCK/16)
+ */
+static void
+pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+{
+	unsigned long	flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		/* update clocksource counter, then enable the IRQ */
+		raw_local_irq_save(flags);
+		pit_cnt += pit_cycle * PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
+		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN
+				| AT91_PIT_PITIEN);
+		raw_local_irq_restore(flags);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		BUG();
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+		/* disable irq, leaving the clocksource active */
+		at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
 }
 
+static struct clock_event_device pit_clkevt = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 100,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_mode	= pit_clkevt_mode,
+};
+
+
 /*
  * IRQ handler for the timer.
  */
-static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t at91sam926x_pit_interrupt(int irq, void *dev_id)
 {
-	volatile long nr_ticks;
 
-	if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) {	/* This is a shared interrupt */
-		/* Get number to ticks performed before interrupt and clear PIT interrupt */
+	/* The PIT interrupt may be disabled, and is shared */
+	if ((pit_clkevt.mode == CLOCK_EVT_MODE_PERIODIC)
+			&& (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS)) {
+		unsigned nr_ticks;
+
+		/* Get number of ticks performed before irq, and ack it */
 		nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR));
 		do {
-			timer_tick();
+			pit_cnt += pit_cycle;
+			pit_clkevt.event_handler(&pit_clkevt);
 			nr_ticks--;
 		} while (nr_ticks);
 
 		return IRQ_HANDLED;
-	} else
-		return IRQ_NONE;		/* not handled */
+	}
+
+	return IRQ_NONE;
 }
 
-static struct irqaction at91sam926x_timer_irq = {
+static struct irqaction at91sam926x_pit_irq = {
 	.name		= "at91_tick",
 	.flags		= IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= at91sam926x_timer_interrupt
+	.handler	= at91sam926x_pit_interrupt
 };
 
-void at91sam926x_timer_reset(void)
+static void at91sam926x_pit_reset(void)
 {
-	/* Disable timer */
+	/* Disable timer and irqs */
 	at91_sys_write(AT91_PIT_MR, 0);
 
-	/* Clear any pending interrupts */
-	(void) at91_sys_read(AT91_PIT_PIVR);
+	/* Clear any pending interrupts, wait for PIT to stop counting */
+	while (PIT_CPIV(at91_sys_read(AT91_PIT_PIVR)) != 0)
+		cpu_relax();
 
-	/* Set Period Interval timer and enable its interrupt */
-	at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN);
+	/* Start PIT but don't enable IRQ */
+	at91_sys_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
 }
 
 /*
- * Set up timer interrupt.
+ * Set up both clocksource and clockevent support.
  */
-void __init at91sam926x_timer_init(void)
+static void __init at91sam926x_pit_init(void)
 {
-	/* Initialize and enable the timer */
-	at91sam926x_timer_reset();
+	unsigned long	pit_rate;
+	unsigned	bits;
+
+	/*
+	 * Use our actual MCK to figure out how many MCK/16 ticks per
+	 * 1/HZ period (instead of a compile-time constant LATCH).
+	 */
+	pit_rate = clk_get_rate(clk_get(NULL, "mck")) / 16;
+	pit_cycle = (pit_rate + HZ/2) / HZ;
+	WARN_ON(((pit_cycle - 1) & ~AT91_PIT_PIV) != 0);
 
-	/* Make IRQs happen for the system timer. */
-	setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq);
+	/* Initialize and enable the timer */
+	at91sam926x_pit_reset();
+
+	/*
+	 * Register clocksource.  The high order bits of PIV are unused,
+	 * so this isn't a 32-bit counter unless we get clockevent irqs.
+	 */
+	pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift);
+	bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */;
+	pit_clk.mask = CLOCKSOURCE_MASK(bits);
+	clocksource_register(&pit_clk);
+
+	/* Set up irq handler */
+	setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq);
+
+	/* Set up and register clockevents */
+	pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
+	clockevents_register_device(&pit_clkevt);
 }
 
-#ifdef CONFIG_PM
-static void at91sam926x_timer_suspend(void)
+static void at91sam926x_pit_suspend(void)
 {
 	/* Disable timer */
 	at91_sys_write(AT91_PIT_MR, 0);
 }
-#else
-#define at91sam926x_timer_suspend	NULL
-#endif
 
 struct sys_timer at91sam926x_timer = {
-	.init		= at91sam926x_timer_init,
-	.offset		= at91sam926x_gettimeoffset,
-	.suspend	= at91sam926x_timer_suspend,
-	.resume		= at91sam926x_timer_reset,
+	.init		= at91sam926x_pit_init,
+	.suspend	= at91sam926x_pit_suspend,
+	.resume		= at91sam926x_pit_reset,
 };
-
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 4813a35f6cf5..902c79893ec7 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/pm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -17,6 +18,7 @@
 #include <asm/arch/at91sam9rl.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -244,6 +246,11 @@ static void at91sam9rl_reset(void)
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
+static void at91sam9rl_poweroff(void)
+{
+	at91_sys_write(AT91_SHDW_CR, AT91_SHDW_KEY | AT91_SHDW_SHDW);
+}
+
 
 /* --------------------------------------------------------------------
  *  AT91SAM9RL processor initialization
@@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsigned long main_clock)
 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
 
 	at91_arch_reset = at91sam9rl_reset;
+	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
 	/* Init clock subsystem */
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index f43b5c33e45d..dbb9a5fc2090 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -20,7 +20,7 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91sam9rl.h>
 #include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -105,10 +105,15 @@ static struct at91_nand_data nand_data;
 #define NAND_BASE	AT91_CHIPSELECT_3
 
 static struct resource nand_resources[] = {
-	{
+	[0] = {
 		.start	= NAND_BASE,
 		.end	= NAND_BASE + SZ_256M - 1,
 		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91_BASE_SYS + AT91_ECC,
+		.end	= AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -385,6 +390,55 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  Timer/Counter block
+ * -------------------------------------------------------------------- */
+
+#ifdef CONFIG_ATMEL_TCLIB
+
+static struct resource tcb_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_TCB0,
+		.end	= AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_TC0,
+		.end	= AT91SAM9RL_ID_TC0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= AT91SAM9RL_ID_TC1,
+		.end	= AT91SAM9RL_ID_TC1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= AT91SAM9RL_ID_TC2,
+		.end	= AT91SAM9RL_ID_TC2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_tcb_device = {
+	.name		= "atmel_tcb",
+	.id		= 0,
+	.resource	= tcb_resources,
+	.num_resources	= ARRAY_SIZE(tcb_resources),
+};
+
+static void __init at91_add_device_tc(void)
+{
+	/* this chip has a separate clock and irq for each TC channel */
+	at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
+	at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
+	at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
+	platform_device_register(&at91sam9rl_tcb_device);
+}
+#else
+static void __init at91_add_device_tc(void) { }
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
 
@@ -418,7 +472,7 @@ static struct resource rtt_resources[] = {
 
 static struct platform_device at91sam9rl_rtt_device = {
 	.name		= "at91_rtt",
-	.id		= -1,
+	.id		= 0,
 	.resource	= rtt_resources,
 	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
@@ -539,9 +593,6 @@ static inline void configure_ssc1_pins(unsigned pins)
 }
 
 /*
- * Return the device node so that board init code can use it as the
- * parent for the device node reflecting how it's used on this board.
- *
  * SSC controllers are accessed through library code, instead of any
  * kind of all-singing/all-dancing driver.  For example one could be
  * used by a particular I2S audio codec's driver, while another one
@@ -802,54 +853,9 @@ static inline void configure_usart3_pins(unsigned pins)
 		at91_set_B_periph(AT91_PIN_PD3, 0);	/* CTS3 */
 }
 
-static struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
+static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
 struct platform_device *atmel_default_console_device;	/* the serial console device */
 
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
-	int i;
-
-	/* Fill in list of supported UARTs */
-	for (i = 0; i < config->nr_tty; i++) {
-		switch (config->tty_map[i]) {
-			case 0:
-				configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
-				at91_uarts[i] = &at91sam9rl_uart0_device;
-				at91_clock_associate("usart0_clk", &at91sam9rl_uart0_device.dev, "usart");
-				break;
-			case 1:
-				configure_usart1_pins(0);
-				at91_uarts[i] = &at91sam9rl_uart1_device;
-				at91_clock_associate("usart1_clk", &at91sam9rl_uart1_device.dev, "usart");
-				break;
-			case 2:
-				configure_usart2_pins(0);
-				at91_uarts[i] = &at91sam9rl_uart2_device;
-				at91_clock_associate("usart2_clk", &at91sam9rl_uart2_device.dev, "usart");
-				break;
-			case 3:
-				configure_usart3_pins(0);
-				at91_uarts[i] = &at91sam9rl_uart3_device;
-				at91_clock_associate("usart3_clk", &at91sam9rl_uart3_device.dev, "usart");
-				break;
-			case 4:
-				configure_dbgu_pins();
-				at91_uarts[i] = &at91sam9rl_dbgu_device;
-				at91_clock_associate("mck", &at91sam9rl_dbgu_device.dev, "usart");
-				break;
-			default:
-				continue;
-		}
-		at91_uarts[i]->id = i;		/* update ID number to mapped ID */
-	}
-
-	/* Set serial console device */
-	if (config->console_tty < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[config->console_tty];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
@@ -893,8 +899,6 @@ void __init at91_set_serial_console(unsigned portnr)
 {
 	if (portnr < ATMEL_MAX_UART)
 		atmel_default_console_device = at91_uarts[portnr];
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 
 void __init at91_add_device_serial(void)
@@ -905,9 +909,11 @@ void __init at91_add_device_serial(void)
 		if (at91_uarts[i])
 			platform_device_register(at91_uarts[i]);
 	}
+
+	if (!atmel_default_console_device)
+		printk(KERN_INFO "AT91: No default serial console defined.\n");
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_set_serial_console(unsigned portnr) {}
 void __init at91_add_device_serial(void) {}
@@ -925,6 +931,7 @@ static int __init at91_add_standard_devices(void)
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
+	at91_add_device_tc();
 	return 0;
 }
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
new file mode 100644
index 000000000000..b22a1a004055
--- /dev/null
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -0,0 +1,180 @@
+/*
+ * KwikByte CAM60 (KB9260)
+ *
+ * based on board-sam9260ek.c
+ *   Copyright (C) 2005 SAN People
+ *   Copyright (C) 2006 Atmel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static void __init cam60_map_io(void)
+{
+	/* Initialize processor: 10 MHz crystal */
+	at91sam9260_initialize(10000000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init cam60_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data __initdata cam60_usbh_data = {
+	.ports		= 1,
+};
+
+
+/*
+ * SPI devices.
+ */
+#if defined(CONFIG_MTD_DATAFLASH)
+static struct mtd_partition __initdata cam60_spi_partitions[] = {
+	{
+		.name	= "BOOT1",
+		.offset	= 0,
+		.size	= 4 * 1056,
+	},
+	{
+		.name	= "BOOT2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 256 * 1056,
+	},
+	{
+		.name	= "kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 2222 * 1056,
+	},
+	{
+		.name	= "file system",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data __initdata cam60_spi_flash_platform_data = {
+	.name		= "spi_flash",
+	.parts		= cam60_spi_partitions,
+	.nr_parts	= ARRAY_SIZE(cam60_spi_partitions)
+};
+#endif
+
+static struct spi_board_info cam60_spi_devices[] = {
+#if defined(CONFIG_MTD_DATAFLASH)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+		.platform_data	= &cam60_spi_flash_platform_data
+	},
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct __initdata at91_eth_data cam60_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PB5,
+	.is_rmii	= 0,
+};
+
+
+/*
+ * NAND Flash
+ */
+static struct mtd_partition __initdata cam60_nand_partition[] = {
+	{
+		.name	= "nand_fs",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(cam60_nand_partition);
+	return cam60_nand_partition;
+}
+
+static struct at91_nand_data __initdata cam60_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	// .det_pin	= ... not there
+	.rdy_pin	= AT91_PIN_PA9,
+	.enable_pin	= AT91_PIN_PA7,
+	.partition_info	= nand_partitions,
+};
+
+
+static void __init cam60_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* SPI */
+	at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
+	/* Ethernet */
+	at91_add_device_eth(&cam60_macb_data);
+	/* USB Host */
+	/* enable USB power supply circuit */
+	at91_set_gpio_output(AT91_PIN_PB18, 1);
+	at91_add_device_usbh(&cam60_usbh_data);
+	/* NAND */
+	at91_add_device_nand(&cam60_nand_data);
+}
+
+MACHINE_START(CAM60, "KwikByte CAM60")
+	/* Maintainer: KwikByte */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= cam60_map_io,
+	.init_irq	= cam60_init_irq,
+	.init_machine	= cam60_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 185437131541..e5512d1ff217 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -45,7 +45,7 @@
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 0e2a11fc5bbd..26fea4dcc3a0 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -43,17 +43,6 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb337_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init csb337_map_io(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
@@ -62,8 +51,11 @@ static void __init csb337_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb337_uart_config);
+	/* DBGU on ttyS0 */
+	at91_register_uart(0, 0, 0);
+
+	/* make console=ttyS0 the default */
+	at91_set_serial_console(0);
 }
 
 static void __init csb337_init_irq(void)
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index c5c721d27f42..419fd19b620b 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -40,27 +40,16 @@
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb637_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init csb637_map_io(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
 	at91rm9200_initialize(3686400, AT91RM9200_BGA);
 
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+	/* DBGU on ttyS0 */
+	at91_register_uart(0, 0, 0);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb637_uart_config);
+	/* make console=ttyS0 the default */
+	at91_set_serial_console(0);
 }
 
 static void __init csb637_init_irq(void)
@@ -118,8 +107,19 @@ static struct platform_device csb_flash = {
 	.num_resources	= ARRAY_SIZE(csb_flash_resources),
 };
 
+static struct gpio_led csb_leds[] = {
+	{	/* "d1", red */
+		.name			= "d1",
+		.gpio			= AT91_PIN_PB2,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+};
+
 static void __init csb637_board_init(void)
 {
+	/* LED(s) */
+	at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
 	/* Serial */
 	at91_add_device_serial();
 	/* Ethernet */
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
new file mode 100644
index 000000000000..e77fad443835
--- /dev/null
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -0,0 +1,178 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
+ * Copyright (C) 2007 emQbit.com.
+ *
+ * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static void __init ecb_at91map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx & Tx only) */
+	at91_register_uart(AT91RM9200_ID_US0, 1, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ecb_at91init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata ecb_at91eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 0,
+};
+
+static struct at91_usbh_data __initdata ecb_at91usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_mmc_data __initdata ecb_at91mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 1,
+};
+
+
+#if defined(CONFIG_MTD_DATAFLASH)
+static struct mtd_partition __initdata my_flash0_partitions[] =
+{
+	{	/* 0x8400 */
+		.name	= "Darrell-loader",
+		.offset	= 0,
+		.size	= 12* 1056,
+	},
+	{
+		.name	= "U-boot",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 110 * 1056,
+	},
+	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
+		.name	= "UBoot-env",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 8 * 1056,
+	},
+	{	/* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
+		.name	= "Kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 1534 * 1056,
+	},
+	{	/* 190200 - jffs2 root filesystem */
+		.name	= "Filesystem",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,	/* 26 sectors */
+	}
+};
+
+static struct flash_platform_data __initdata my_flash0_platform = {
+	.name		= "Removable flash card",
+	.parts		= my_flash0_partitions,
+	.nr_parts	= ARRAY_SIZE(my_flash0_partitions)
+};
+
+#endif
+
+static struct spi_board_info __initdata ecb_at91spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 10 * 1000 * 1000,
+		.bus_num	= 0,
+#if defined(CONFIG_MTD_DATAFLASH)
+		.platform_data	= &my_flash0_platform,
+#endif
+	},
+	{	/* User accessable spi - cs1 (250KHz) */
+		.modalias	= "spi-cs1",
+		.chip_select	= 1,
+		.max_speed_hz	= 250 * 1000,
+	},
+	{	/* User accessable spi - cs2 (1MHz) */
+		.modalias	= "spi-cs2",
+		.chip_select	= 2,
+		.max_speed_hz	= 1 * 1000 * 1000,
+	},
+	{	/* User accessable spi - cs3 (10MHz) */
+		.modalias	= "spi-cs3",
+		.chip_select	= 3,
+		.max_speed_hz	= 10 * 1000 * 1000,
+	},
+};
+
+static void __init ecb_at91board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+
+	/* Ethernet */
+	at91_add_device_eth(&ecb_at91eth_data);
+
+	/* USB Host */
+	at91_add_device_usbh(&ecb_at91usbh_data);
+
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+
+	/* MMC */
+	at91_add_device_mmc(0, &ecb_at91mmc_data);
+
+	/* SPI */
+	at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
+}
+
+MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
+	/* Maintainer: emQbit.com */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= ecb_at91map_io,
+	.init_irq	= ecb_at91init_irq,
+	.init_machine	= ecb_at91board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
new file mode 100644
index 000000000000..8f76af5e219a
--- /dev/null
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -0,0 +1,199 @@
+/*
+ * linux/arch/arm/mach-at91/board-sam9-l9260.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2007 Olimex Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA7,
+	.is_rmii	= 0,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Bootloader Area",
+		.offset	= 0,
+		.size	= 10 * 1024 * 1024,
+	},
+	{
+		.name	= "User Area",
+		.offset	= 10 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PC8,
+	.wp_pin		= AT91_PIN_PC4,
+//	.vcc_pin	= ... not connected
+};
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mmc(0, &ek_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(NULL, 0);
+}
+
+MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
+	/* Maintainer: Olimex */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index b343a6c28120..4d1d9c777084 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -25,6 +25,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -37,29 +39,28 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
 
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 5 = USART0 .. USART5
- *    6      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 3,
-	.tty_map	= { 6, 0, 1, -1, -1, -1, -1 }	/* ttyS0, ..., ttyS6 */
-};
-
 static void __init ek_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
@@ -85,6 +86,35 @@ static struct at91_udc_data __initdata ek_udc_data = {
 
 
 /*
+ * Audio
+ */
+static struct at73c213_board_info at73c213_data = {
+	.ssc_id		= 0,
+	.shortname	= "AT91SAM9260-EK external DAC",
+};
+
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
+static void __init at73c213_set_clk(struct at73c213_board_info *info)
+{
+	struct clk *pck0;
+	struct clk *plla;
+
+	pck0 = clk_get(NULL, "pck0");
+	plla = clk_get(NULL, "plla");
+
+	/* AT73C213 MCK Clock */
+	at91_set_B_periph(AT91_PIN_PC1, 0);	/* PCK0 */
+
+	clk_set_parent(pck0, plla);
+	clk_put(plla);
+
+	info->dac_clk = pck0;
+}
+#else
+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
+#endif
+
+/*
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
@@ -110,6 +140,8 @@ static struct spi_board_info ek_spi_devices[] = {
 		.chip_select	= 0,
 		.max_speed_hz	= 10 * 1000 * 1000,
 		.bus_num	= 1,
+		.mode		= SPI_MODE_1,
+		.platform_data	= &at73c213_data,
 	},
 #endif
 };
@@ -172,6 +204,24 @@ static struct at91_mmc_data __initdata ek_mmc_data = {
 //	.vcc_pin	= ... not connected
 };
 
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds5",
+		.gpio			= AT91_PIN_PA6,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PA9,
+		.default_trigger	= "heartbeat",
+	}
+};
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -190,6 +240,11 @@ static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
+	/* SSC (to AT73C213) */
+	at73c213_set_clk(&at73c213_data);
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 0ce38dfa6ebe..08382c0df221 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -26,6 +26,8 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
 #include <linux/dm9000.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
@@ -44,22 +46,11 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 2 = USART0 .. USART2
- *    3      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 1,
-	.tty_map	= { 3, -1, -1, -1 }		/* ttyS0, ..., ttyS3 */
-};
-
 static void __init ek_map_io(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
@@ -68,8 +59,11 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
@@ -239,6 +233,35 @@ static void __init ek_add_device_ts(void) {}
 #endif
 
 /*
+ * Audio
+ */
+static struct at73c213_board_info at73c213_data = {
+	.ssc_id		= 1,
+	.shortname	= "AT91SAM9261-EK external DAC",
+};
+
+#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
+static void __init at73c213_set_clk(struct at73c213_board_info *info)
+{
+	struct clk *pck2;
+	struct clk *plla;
+
+	pck2 = clk_get(NULL, "pck2");
+	plla = clk_get(NULL, "plla");
+
+	/* AT73C213 MCK Clock */
+	at91_set_B_periph(AT91_PIN_PB31, 0);	/* PCK2 */
+
+	clk_set_parent(pck2, plla);
+	clk_put(plla);
+
+	info->dac_clk = pck2;
+}
+#else
+static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
+#endif
+
+/*
  * SPI devices
  */
 static struct spi_board_info ek_spi_devices[] = {
@@ -256,6 +279,7 @@ static struct spi_board_info ek_spi_devices[] = {
 		.bus_num	= 0,
 		.platform_data	= &ads_info,
 		.irq		= AT91SAM9261_ID_IRQ0,
+		.controller_data = (void *) AT91_PIN_PA28,	/* CS pin */
 	},
 #endif
 #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
@@ -271,6 +295,9 @@ static struct spi_board_info ek_spi_devices[] = {
 		.chip_select	= 3,
 		.max_speed_hz	= 10 * 1000 * 1000,
 		.bus_num	= 0,
+		.mode		= SPI_MODE_1,
+		.platform_data	= &at73c213_data,
+		.controller_data = (void*) AT91_PIN_PA29,	/* default for CS3 is PA6, but it must be PA29 */
 	},
 #endif
 };
@@ -460,6 +487,29 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds7",
+		.gpio			= AT91_PIN_PA14,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "top" led, green, userled2 to be defined */
+		.name			= "ds8",
+		.gpio			= AT91_PIN_PA13,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PA23,
+		.default_trigger	= "heartbeat",
+	}
+};
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -481,6 +531,9 @@ static void __init ek_board_init(void)
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 	/* Touchscreen */
 	ek_add_device_ts();
+	/* SSC (to AT73C213) */
+	at73c213_set_clk(&at73c213_data);
+	at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
 #else
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
@@ -489,6 +542,8 @@ static void __init ek_board_init(void)
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 38313abef657..b4cd5d0ed597 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -43,29 +43,24 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 2 = USART0 .. USART2
- *    3      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
-};
-
 static void __init ek_map_io(void)
 {
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
@@ -245,10 +240,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 
 static void at91_lcdc_power_control(int on)
 {
-	if (on)
-		at91_set_gpio_value(AT91_PIN_PD12, 0);	/* power up */
-	else
-		at91_set_gpio_value(AT91_PIN_PD12, 1);	/* power down */
+	at91_set_gpio_value(AT91_PIN_PA30, on);
 }
 
 /* Driver datas */
@@ -344,7 +336,7 @@ static struct gpio_led ek_leds[] = {
 		.name			= "ds3",
 		.gpio			= AT91_PIN_PB7,
 		.default_trigger	= "heartbeat",
-	},
+	}
 };
 
 
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index bc0546d7245f..ffc0597aee8d 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -29,29 +29,24 @@
 
 #include <asm/arch/board.h>
 #include <asm/arch/gpio.h>
-#include <asm/arch/at91sam926x_mc.h>
+#include <asm/arch/at91sam9_smc.h>
 
 #include "generic.h"
 
 
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata ek_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
 static void __init ek_map_io(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
 
-	/* Setup the serial ports and console */
-	at91_init_serial(&ek_uart_config);
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
+	at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
 }
 
 static void __init ek_init_irq(void)
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
new file mode 100755
index 000000000000..b5717108991d
--- /dev/null
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -0,0 +1,683 @@
+/*
+ * linux/arch/arm/mach-at91/board-yl-9200.c
+ *
+ * Adapted from:
+ *various board files in
+ * /arch/arm/mach-at91
+ * modifications  to convert to  YL-9200 platform
+ *  Copyright (C) 2007 S.Birtles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+/*#include <linux/can_bus/candata.h>*/
+#include <linux/spi/ads7846.h>
+#include <linux/mtd/physmap.h>
+
+/*#include <sound/gpio_sounder.h>*/
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91rm9200_mc.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include "generic.h"
+#include <asm/arch/at91_pio.h>
+
+#define YL_9200_FLASH_BASE	AT91_CHIPSELECT_0
+#define YL_9200_FLASH_SIZE	0x800000
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ *atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
+ *atmel_usart.1: ttyS1 at MMIO 0xfffc0000 (irq = 6) is a ATMEL_SERIAL
+ *atmel_usart.2: ttyS2 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL
+ *atmel_usart.3: ttyS3 at MMIO 0xfffc8000 (irq = 8) is a ATMEL_SERIAL
+ *atmel_usart.4: ttyS4 at MMIO 0xfffcc000 (irq = 9) is a ATMEL_SERIAL
+ * on the YL-9200 we are sitting at the following
+ *ttyS0 at MMIO 0xfefff200 (irq = 1) is a AT91_SERIAL
+ *ttyS1 at MMIO 0xfefc4000 (irq = 7) is a AT91_SERIAL
+ */
+
+/* extern void __init yl_9200_add_device_sounder(struct gpio_sounder *sounders, int nr);*/
+
+static struct at91_uart_config __initdata yl_9200_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 3,
+	.tty_map	= { 4, 1, 0, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init yl_9200_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	/*Also initialises register clocks & gpio*/
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP); /*we have a 3 bank system*/
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&yl_9200_uart_config);
+
+	/* Setup the LEDs D2=PB17,D3=PB16 */
+	at91_init_leds(AT91_PIN_PB16,AT91_PIN_PB17); /*cpu-led,timer-led*/
+}
+
+static void __init yl_9200_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata yl_9200_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PB28,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata yl_9200_usbh_data = {
+	.ports		= 1,  /* this should be 1 not 2 for the Yl9200*/
+};
+
+static struct at91_udc_data __initdata yl_9200_udc_data = {
+/*on sheet 7 Schemitic rev 1.0*/
+	.pullup_pin	= AT91_PIN_PC4,
+	.vbus_pin=  AT91_PIN_PC5,
+	.pullup_active_low = 1, /*ACTIVE LOW!! due to PNP transistor on page 7*/
+
+};
+/*
+static struct at91_cf_data __initdata yl_9200_cf_data = {
+TODO S.BIRTLES
+	.det_pin	= AT91_PIN_xxx,
+	.rst_pin	= AT91_PIN_xxx,
+	.irq_pin	= ... not connected
+	.vcc_pin	= ... always powered
+
+};
+*/
+static struct at91_mmc_data __initdata yl_9200_mmc_data = {
+	.det_pin	= AT91_PIN_PB9, /*THIS LOOKS CORRECT SHEET7*/
+/*	.wp_pin		= ... not connected  SHEET7*/
+	.slot_b		= 0,
+	.wire4		= 1,
+
+};
+
+/* --------------------------------------------------------------------
+ *  Touch screen
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+static int ads7843_pendown_state(void)
+{
+	return !at91_get_gpio_value(AT91_PIN_PB11);	/* Touchscreen PENIRQ */
+}
+
+static void __init at91_init_device_ts(void)
+{
+/*IMPORTANT NOTE THE SPI INTERFACE IS ALREADY CONFIGURED BY XXX_DEVICES.C
+THAT IS TO SAY THAT  MISO,MOSI,SPCK AND CS  are already configured
+we only need to enable the other datapins which are:
+PB10/RK1 BUSY
+*/
+/* Touchscreen BUSY signal ,  pin,use pullup ( TODO not currently used in the ADS7843/6.c driver)*/
+at91_set_gpio_input(AT91_PIN_PB10, 1);
+}
+
+#else
+static void __init at91_init_device_ts(void) {}
+#endif
+
+static struct ads7846_platform_data ads_info = {
+	.model			= 7843,
+	.x_min			= 150,
+	.x_max			= 3830,
+	.y_min			= 190,
+	.y_max			= 3830,
+	.vref_delay_usecs	= 100,
+/* for a 8" touch screen*/
+	//.x_plate_ohms		= 603, //= 450, S.Birtles TODO
+	//.y_plate_ohms		= 332, //= 250, S.Birtles TODO
+/*for a 10.4" touch screen*/
+	//.x_plate_ohms		=611,
+	//.y_plate_ohms		=325,
+
+	.x_plate_ohms	= 576,
+	.y_plate_ohms	= 366,
+		//
+	.pressure_max		= 15000, /*generally nonsense on the 7843*/
+	 /*number of times to send query to chip in a given run 0 equals one time (do not set to 0!! ,there is a bug in ADS 7846 code)*/
+	.debounce_max		= 1,
+	.debounce_rep		= 0,
+	.debounce_tol		= (~0),
+	.get_pendown_state	= ads7843_pendown_state,
+};
+
+/*static struct canbus_platform_data can_info = {
+	.model			= 2510,
+};
+*/
+
+static struct spi_board_info yl_9200_spi_devices[] = {
+/*this sticks it at:
+ /sys/devices/platform/atmel_spi.0/spi0.0
+ /sys/bus/platform/devices/
+Documentation/spi IIRC*/
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+ /*(this IS correct 04-NOV-2007)*/
+	{
+		.modalias		= "ads7846", /* because the driver is called ads7846*/
+		.chip_select	= 0, /*THIS MUST BE AN INDEX INTO AN ARRAY OF  pins */
+/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select*/
+		/*.controller_data =AT91_PIN_PA3 ,*/
+		.max_speed_hz	= 5000*26, /*(4700 * 26)-125000 * 26, (max sample rate @ 3V) * (cmd + data + overhead) */
+		.bus_num		= 0,
+		.platform_data	= &ads_info,
+		.irq			= AT91_PIN_PB11,
+	},
+#endif
+/*we need to put our CAN driver data here!!*/
+/*THIS IS ALL DUMMY DATA*/
+/*	{
+		.modalias		= "mcp2510", //DUMMY for MCP2510 chip
+		.chip_select	= 1,*/ /*THIS MUST BE AN INDEX INTO AN ARRAY OF  pins */
+	/*this is ONLY TO BE USED if chipselect above is not used, it passes a pin directly for the chip select */
+	/*  .controller_data =AT91_PIN_PA4 ,
+		.max_speed_hz	= 25000 * 26,
+		.bus_num		= 0,
+		.platform_data	= &can_info,
+		.irq			= AT91_PIN_PC0,
+	},
+	*/
+	//max SPI chip needs to go here
+};
+
+static struct mtd_partition __initdata yl_9200_nand_partition[] = {
+	{
+		.name	= "AT91 NAND partition 1, boot",
+		.offset	= 0,
+		.size	= 1 * SZ_256K
+	},
+	{
+		.name	= "AT91 NAND partition 2, kernel",
+		.offset	= 1 * SZ_256K,
+		.size	= 2 * SZ_1M - 1 * SZ_256K
+	},
+	{
+		.name	= "AT91 NAND partition 3, filesystem",
+		.offset	= 2 * SZ_1M,
+		.size	= 14 * SZ_1M
+	},
+	{
+		.name	= "AT91 NAND partition 4, storage",
+		.offset	= 16 * SZ_1M,
+		.size	= 16 * SZ_1M
+	},
+	{
+		.name	= "AT91 NAND partition 5, ext-fs",
+		.offset	= 32 * SZ_1M,
+		.size	= 32 * SZ_1M
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(yl_9200_nand_partition);
+	return yl_9200_nand_partition;
+}
+
+static struct at91_nand_data __initdata yl_9200_nand_data = {
+	.ale= 6,
+	.cle= 7,
+	/*.det_pin	= AT91_PIN_PCxx,*/   /*we don't have a det pin because NandFlash is fixed to board*/
+	.rdy_pin	= AT91_PIN_PC14,  /*R/!B Sheet10*/
+	.enable_pin	= AT91_PIN_PC15,  /*!CE  Sheet10 */
+	.partition_info	= nand_partitions,
+};
+
+
+
+/*
+TODO S.Birtles
+potentially a problem with the size above
+physmap platform flash device: 00800000 at 10000000
+physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
+NOR chip too large to fit in mapping. Attempting to cope...
+ Intel/Sharp Extended Query Table at 0x0031
+Using buffer write method
+cfi_cmdset_0001: Erase suspend on write enabled
+Reducing visibility of 16384KiB chip to 8192KiB
+*/
+
+static struct mtd_partition yl_9200_flash_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x001C0000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00200000
+	}
+
+};
+
+static struct physmap_flash_data yl_9200_flash_data = {
+	.width	= 2,
+	.parts          = yl_9200_flash_partitions,
+	.nr_parts       = ARRAY_SIZE(yl_9200_flash_partitions),
+};
+
+static struct resource yl_9200_flash_resources[] = {
+{
+	.start		= YL_9200_FLASH_BASE,
+	.end		= YL_9200_FLASH_BASE + YL_9200_FLASH_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device yl_9200_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &yl_9200_flash_data,
+			},
+	.resource	= yl_9200_flash_resources,
+	.num_resources  = ARRAY_SIZE(yl_9200_flash_resources),
+};
+
+
+static struct gpio_led yl_9200_leds[] = {
+/*D2 &D3 are passed directly in via at91_init_leds*/
+	{
+		.name			= "led4",  /*D4*/
+		.gpio			= AT91_PIN_PB15,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+		/*.default_trigger	= "timer",*/
+	},
+	{
+		.name			= "led5",  /*D5*/
+		.gpio			= AT91_PIN_PB8,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+//static struct gpio_sounder yl_9200_sounder[] = {*/
+/*This is a simple speaker attached to a gpo line*/
+
+//	{
+//		.name			= "Speaker",  /*LS1*/
+//		.gpio			= AT91_PIN_PA22,
+//		.active_low		= 0,
+//		.default_trigger	= "heartbeat",
+		/*.default_trigger	= "timer",*/
+//	},
+//};
+
+
+
+static struct i2c_board_info __initdata yl_9200_i2c_devices[] = {
+	{
+	/*TODO*/
+		I2C_BOARD_INFO("CS4334", 0x00),
+	}
+};
+
+
+ /*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button yl_9200_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA24,
+		.code	= BTN_2,
+		.desc		= "SW2",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB1,
+		.code	= BTN_3,
+		.desc		= "SW3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB2,
+		.code	= BTN_4,
+		.desc		= "SW4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PB6,
+		.code	= BTN_5,
+		.desc		= "SW5",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+
+};
+
+static struct gpio_keys_platform_data yl_9200_button_data = {
+	.buttons	= yl_9200_buttons,
+	.nbuttons	= ARRAY_SIZE(yl_9200_buttons),
+};
+
+static struct platform_device yl_9200_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+	.platform_data	= &yl_9200_button_data,
+	}
+};
+
+static void __init yl_9200_add_device_buttons(void)
+{
+	//SW2
+	at91_set_gpio_input(AT91_PIN_PA24, 0);
+	at91_set_deglitch(AT91_PIN_PA24, 1);
+
+	//SW3
+	at91_set_gpio_input(AT91_PIN_PB1, 0);
+	at91_set_deglitch(AT91_PIN_PB1, 1);
+	//SW4
+	at91_set_gpio_input(AT91_PIN_PB2, 0);
+	at91_set_deglitch(AT91_PIN_PB2, 1);
+
+	//SW5
+	at91_set_gpio_input(AT91_PIN_PB6, 0);
+	at91_set_deglitch(AT91_PIN_PB6, 1);
+
+
+	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* #TURN BUTTONS ON, SHEET 5  of schematics */
+	platform_device_register(&yl_9200_button_device);
+}
+#else
+static void __init yl_9200_add_device_buttons(void) {}
+#endif
+
+#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#include <video/s1d13xxxfb.h>
+
+/* EPSON S1D13806 FB (discontinued chip)*/
+/* EPSON S1D13506 FB */
+
+#define AT91_FB_REG_BASE	0x80000000L
+#define AT91_FB_REG_SIZE	0x200
+#define AT91_FB_VMEM_BASE	0x80200000L
+#define AT91_FB_VMEM_SIZE	0x200000L
+
+/*#define S1D_DISPLAY_WIDTH           640*/
+/*#define S1D_DISPLAY_HEIGHT          480*/
+
+
+static void __init yl_9200_init_video(void)
+{
+	at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
+	at91_sys_write(AT91_PIOC + PIO_BSR,0);
+	at91_sys_write(AT91_PIOC + PIO_ASR,AT91_PIN_PC6);
+
+	at91_sys_write( AT91_SMC_CSR(2),
+	AT91_SMC_NWS_(0x4) |
+	AT91_SMC_WSEN |
+	AT91_SMC_TDF_(0x100) |
+	AT91_SMC_DBW
+	);
+
+
+
+}
+
+
+static struct s1d13xxxfb_regval yl_9200_s1dfb_initregs[] =
+{
+	{S1DREG_MISC,				0x00},   /* Miscellaneous Register*/
+	{S1DREG_COM_DISP_MODE,		0x01},   /* Display Mode Register, LCD only*/
+	{S1DREG_GPIO_CNF0,			0x00},   /* General IO Pins Configuration Register*/
+	{S1DREG_GPIO_CTL0,			0x00},   /* General IO Pins Control Register*/
+	{S1DREG_CLK_CNF,			0x11},   /* Memory Clock Configuration Register*/
+	{S1DREG_LCD_CLK_CNF,		0x10},   /* LCD Pixel Clock Configuration Register*/
+	{S1DREG_CRT_CLK_CNF,		0x12},   /* CRT/TV Pixel Clock Configuration Register*/
+	{S1DREG_MPLUG_CLK_CNF,		0x01},   /* MediaPlug Clock Configuration Register*/
+	{S1DREG_CPU2MEM_WST_SEL,	0x02},   /* CPU To Memory Wait State Select Register*/
+	{S1DREG_MEM_CNF,			0x00},   /* Memory Configuration Register*/
+	{S1DREG_SDRAM_REF_RATE,		0x04},   /* DRAM Refresh Rate Register, MCLK source*/
+	{S1DREG_SDRAM_TC0,			0x12},   /* DRAM Timings Control Register 0*/
+	{S1DREG_SDRAM_TC1,			0x02},   /* DRAM Timings Control Register 1*/
+	{S1DREG_PANEL_TYPE,			0x25},   /* Panel Type Register*/
+	{S1DREG_MOD_RATE,			0x00},   /* MOD Rate Register*/
+	{S1DREG_LCD_DISP_HWIDTH,	0x4F},   /* LCD Horizontal Display Width Register*/
+	{S1DREG_LCD_NDISP_HPER,		0x13},   /* LCD Horizontal Non-Display Period Register*/
+	{S1DREG_TFT_FPLINE_START,	0x01},   /* TFT FPLINE Start Position Register*/
+	{S1DREG_TFT_FPLINE_PWIDTH,	0x0c},   /* TFT FPLINE Pulse Width Register*/
+	{S1DREG_LCD_DISP_VHEIGHT0,	0xDF},   /* LCD Vertical Display Height Register 0*/
+	{S1DREG_LCD_DISP_VHEIGHT1,	0x01},   /* LCD Vertical Display Height Register 1*/
+	{S1DREG_LCD_NDISP_VPER,		0x2c},   /* LCD Vertical Non-Display Period Register*/
+	{S1DREG_TFT_FPFRAME_START,	0x0a},   /* TFT FPFRAME Start Position Register*/
+	{S1DREG_TFT_FPFRAME_PWIDTH,	0x02},   /* TFT FPFRAME Pulse Width Register*/
+	{S1DREG_LCD_DISP_MODE,		0x05},   /* LCD Display Mode Register*/
+	{S1DREG_LCD_MISC,			0x01},   /* LCD Miscellaneous Register*/
+	{S1DREG_LCD_DISP_START0,	0x00},   /* LCD Display Start Address Register 0*/
+	{S1DREG_LCD_DISP_START1,	0x00},   /* LCD Display Start Address Register 1*/
+	{S1DREG_LCD_DISP_START2,	0x00},   /* LCD Display Start Address Register 2*/
+	{S1DREG_LCD_MEM_OFF0,		0x80},   /* LCD Memory Address Offset Register 0*/
+	{S1DREG_LCD_MEM_OFF1,		0x02},   /* LCD Memory Address Offset Register 1*/
+	{S1DREG_LCD_PIX_PAN,		0x03},   /* LCD Pixel Panning Register*/
+	{S1DREG_LCD_DISP_FIFO_HTC,	0x00},   /* LCD Display FIFO High Threshold Control Register*/
+	{S1DREG_LCD_DISP_FIFO_LTC,	0x00},   /* LCD Display FIFO Low Threshold Control Register*/
+	{S1DREG_CRT_DISP_HWIDTH,	0x4F},   /* CRT/TV Horizontal Display Width Register*/
+	{S1DREG_CRT_NDISP_HPER,		0x13},   /* CRT/TV Horizontal Non-Display Period Register*/
+	{S1DREG_CRT_HRTC_START,		0x01},   /* CRT/TV HRTC Start Position Register*/
+	{S1DREG_CRT_HRTC_PWIDTH,	0x0B},   /* CRT/TV HRTC Pulse Width Register*/
+	{S1DREG_CRT_DISP_VHEIGHT0,	0xDF},   /* CRT/TV Vertical Display Height Register 0*/
+	{S1DREG_CRT_DISP_VHEIGHT1,	0x01},   /* CRT/TV Vertical Display Height Register 1*/
+	{S1DREG_CRT_NDISP_VPER,		0x2B},   /* CRT/TV Vertical Non-Display Period Register*/
+	{S1DREG_CRT_VRTC_START,		0x09},   /* CRT/TV VRTC Start Position Register*/
+	{S1DREG_CRT_VRTC_PWIDTH,	0x01},   /* CRT/TV VRTC Pulse Width Register*/
+	{S1DREG_TV_OUT_CTL,			0x18},   /* TV Output Control Register */
+	{S1DREG_CRT_DISP_MODE,		0x05},   /* CRT/TV Display Mode Register, 16BPP*/
+	{S1DREG_CRT_DISP_START0,	0x00},   /* CRT/TV Display Start Address Register 0*/
+	{S1DREG_CRT_DISP_START1,	0x00},   /* CRT/TV Display Start Address Register 1*/
+	{S1DREG_CRT_DISP_START2,	0x00},   /* CRT/TV Display Start Address Register 2*/
+	{S1DREG_CRT_MEM_OFF0,		0x80},   /* CRT/TV Memory Address Offset Register 0*/
+	{S1DREG_CRT_MEM_OFF1,		0x02},   /* CRT/TV Memory Address Offset Register 1*/
+	{S1DREG_CRT_PIX_PAN,		0x00},   /* CRT/TV Pixel Panning Register*/
+	{S1DREG_CRT_DISP_FIFO_HTC,	0x00},   /* CRT/TV Display FIFO High Threshold Control Register*/
+	{S1DREG_CRT_DISP_FIFO_LTC,	0x00},   /* CRT/TV Display FIFO Low Threshold Control Register*/
+	{S1DREG_LCD_CUR_CTL,		0x00},   /* LCD Ink/Cursor Control Register*/
+	{S1DREG_LCD_CUR_START,		0x01},   /* LCD Ink/Cursor Start Address Register*/
+	{S1DREG_LCD_CUR_XPOS0,		0x00},   /* LCD Cursor X Position Register 0*/
+	{S1DREG_LCD_CUR_XPOS1,		0x00},   /* LCD Cursor X Position Register 1*/
+	{S1DREG_LCD_CUR_YPOS0,		0x00},   /* LCD Cursor Y Position Register 0*/
+	{S1DREG_LCD_CUR_YPOS1,		0x00},   /* LCD Cursor Y Position Register 1*/
+	{S1DREG_LCD_CUR_BCTL0,		0x00},   /* LCD Ink/Cursor Blue Color 0 Register*/
+	{S1DREG_LCD_CUR_GCTL0,		0x00},   /* LCD Ink/Cursor Green Color 0 Register*/
+	{S1DREG_LCD_CUR_RCTL0,		0x00},   /* LCD Ink/Cursor Red Color 0 Register*/
+	{S1DREG_LCD_CUR_BCTL1,		0x1F},   /* LCD Ink/Cursor Blue Color 1 Register*/
+	{S1DREG_LCD_CUR_GCTL1,		0x3F},   /* LCD Ink/Cursor Green Color 1 Register*/
+	{S1DREG_LCD_CUR_RCTL1,		0x1F},   /* LCD Ink/Cursor Red Color 1 Register*/
+	{S1DREG_LCD_CUR_FIFO_HTC,	0x00},   /* LCD Ink/Cursor FIFO Threshold Register*/
+	{S1DREG_CRT_CUR_CTL,		0x00},   /* CRT/TV Ink/Cursor Control Register*/
+	{S1DREG_CRT_CUR_START,		0x01},   /* CRT/TV Ink/Cursor Start Address Register*/
+	{S1DREG_CRT_CUR_XPOS0,		0x00},   /* CRT/TV Cursor X Position Register 0*/
+	{S1DREG_CRT_CUR_XPOS1,		0x00},   /* CRT/TV Cursor X Position Register 1*/
+	{S1DREG_CRT_CUR_YPOS0,		0x00},   /* CRT/TV Cursor Y Position Register 0*/
+	{S1DREG_CRT_CUR_YPOS1,		0x00},   /* CRT/TV Cursor Y Position Register 1*/
+	{S1DREG_CRT_CUR_BCTL0,		0x00},   /* CRT/TV Ink/Cursor Blue Color 0 Register*/
+	{S1DREG_CRT_CUR_GCTL0,		0x00},   /* CRT/TV Ink/Cursor Green Color 0 Register*/
+	{S1DREG_CRT_CUR_RCTL0,		0x00},   /* CRT/TV Ink/Cursor Red Color 0 Register*/
+	{S1DREG_CRT_CUR_BCTL1,		0x1F},   /* CRT/TV Ink/Cursor Blue Color 1 Register*/
+	{S1DREG_CRT_CUR_GCTL1,		0x3F},   /* CRT/TV Ink/Cursor Green Color 1 Register*/
+	{S1DREG_CRT_CUR_RCTL1,		0x1F},   /* CRT/TV Ink/Cursor Red Color 1 Register*/
+	{S1DREG_CRT_CUR_FIFO_HTC,	0x00},   /* CRT/TV Ink/Cursor FIFO Threshold Register*/
+	{S1DREG_BBLT_CTL0,			0x00},   /* BitBlt Control Register 0*/
+	{S1DREG_BBLT_CTL1,			0x01},   /* BitBlt Control Register 1*/
+	{S1DREG_BBLT_CC_EXP,		0x00},   /* BitBlt ROP Code/Color Expansion Register*/
+	{S1DREG_BBLT_OP,			0x00},   /* BitBlt Operation Register*/
+	{S1DREG_BBLT_SRC_START0,	0x00},   /* BitBlt Source Start Address Register 0*/
+	{S1DREG_BBLT_SRC_START1,	0x00},   /* BitBlt Source Start Address Register 1*/
+	{S1DREG_BBLT_SRC_START2,	0x00},   /* BitBlt Source Start Address Register 2*/
+	{S1DREG_BBLT_DST_START0,	0x00},   /* BitBlt Destination Start Address Register 0*/
+	{S1DREG_BBLT_DST_START1,	0x00},   /* BitBlt Destination Start Address Register 1*/
+	{S1DREG_BBLT_DST_START2,	0x00},   /* BitBlt Destination Start Address Register 2*/
+	{S1DREG_BBLT_MEM_OFF0,		0x00},   /* BitBlt Memory Address Offset Register 0*/
+	{S1DREG_BBLT_MEM_OFF1,		0x00},   /* BitBlt Memory Address Offset Register 1*/
+	{S1DREG_BBLT_WIDTH0,		0x00},   /* BitBlt Width Register 0*/
+	{S1DREG_BBLT_WIDTH1,		0x00},   /* BitBlt Width Register 1*/
+	{S1DREG_BBLT_HEIGHT0,		0x00},   /* BitBlt Height Register 0*/
+	{S1DREG_BBLT_HEIGHT1,		0x00},   /* BitBlt Height Register 1*/
+	{S1DREG_BBLT_BGC0,			0x00},   /* BitBlt Background Color Register 0*/
+	{S1DREG_BBLT_BGC1,			0x00},   /* BitBlt Background Color Register 1*/
+	{S1DREG_BBLT_FGC0,			0x00},   /* BitBlt Foreground Color Register 0*/
+	{S1DREG_BBLT_FGC1,			0x00},   /* BitBlt Foreground Color Register 1*/
+	{S1DREG_LKUP_MODE,			0x00},   /* Look-Up Table Mode Register*/
+	{S1DREG_LKUP_ADDR,			0x00},   /* Look-Up Table Address Register*/
+	{S1DREG_PS_CNF,				0x00},   /* Power Save Configuration Register*/
+	{S1DREG_PS_STATUS,			0x00},   /* Power Save Status Register*/
+	{S1DREG_CPU2MEM_WDOGT,		0x00},   /* CPU-to-Memory Access Watchdog Timer Register*/
+	{S1DREG_COM_DISP_MODE,		0x01},   /* Display Mode Register, LCD only*/
+};
+
+static u64 s1dfb_dmamask = 0xffffffffUL;
+
+static struct s1d13xxxfb_pdata yl_9200_s1dfb_pdata = {
+		.initregs				= yl_9200_s1dfb_initregs,
+		.initregssize			= ARRAY_SIZE(yl_9200_s1dfb_initregs),
+		.platform_init_video	= yl_9200_init_video,
+};
+
+static struct resource yl_9200_s1dfb_resource[] = {
+	[0] = {	/* video mem */
+		.name   = "s1d13xxxfb memory",
+	/*	.name   = "s1d13806 memory",*/
+		.start  = AT91_FB_VMEM_BASE,
+		.end    = AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {	/* video registers */
+		.name   = "s1d13xxxfb registers",
+	/*	.name   = "s1d13806 registers",*/
+		.start  = AT91_FB_REG_BASE,
+		.end    = AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device yl_9200_s1dfb_device = {
+	/*TODO S.Birtles , really we need the chip revision in here as well*/
+		.name		= "s1d13806fb",
+	/*  .name		= "s1d13506fb",*/
+		.id			= -1,
+		.dev		= {
+	/*TODO theres a waring here!!*/
+	/*WARNING: vmlinux.o(.data+0x2dbc): Section mismatch: reference to .init.text: (between 'yl_9200_s1dfb_pdata' and 's1dfb_dmamask')*/
+		.dma_mask		= &s1dfb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &yl_9200_s1dfb_pdata,
+	},
+	.resource	= yl_9200_s1dfb_resource,
+	.num_resources	= ARRAY_SIZE(yl_9200_s1dfb_resource),
+};
+
+void __init yl_9200_add_device_video(void)
+{
+	platform_device_register(&yl_9200_s1dfb_device);
+}
+#else
+	void __init yl_9200_add_device_video(void) {}
+#endif
+
+/*this is not called first , yl_9200_map_io is called first*/
+static void __init yl_9200_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* Ethernet */
+	at91_add_device_eth(&yl_9200_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&yl_9200_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&yl_9200_udc_data);
+	/* pullup_pin it is  actually active low, but this is not needed, driver sets it up */
+	/*at91_set_multi_drive(yl_9200_udc_data.pullup_pin, 0);*/
+
+	/* Compact Flash */
+	/*at91_add_device_cf(&yl_9200_cf_data);*/
+
+	/* I2C */
+	at91_add_device_i2c(yl_9200_i2c_devices, ARRAY_SIZE(yl_9200_i2c_devices));
+	/* SPI */
+	/*TODO YL9200 we have 2 spi interfaces touch screen & CAN*/
+	/* AT91_PIN_PA5, AT91_PIN_PA6 , are used on the  max 485 NOT SPI*/
+
+	/*touch screen and CAN*/
+	at91_add_device_spi(yl_9200_spi_devices, ARRAY_SIZE(yl_9200_spi_devices));
+
+	/*Basically the  TS uses  PB11 & PB10 , PB11 is configured by the SPI system BP10 IS NOT USED!!*/
+	/* we need this incase the board is running without a touch screen*/
+	#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+	at91_init_device_ts(); /*init the touch screen device*/
+	#endif
+	/* DataFlash card */
+	at91_add_device_mmc(0, &yl_9200_mmc_data);
+	/* NAND */
+	at91_add_device_nand(&yl_9200_nand_data);
+	/* NOR Flash */
+	platform_device_register(&yl_9200_flash);
+	/* LEDs. Note!! this does not include the led's we passed for the processor status */
+	at91_gpio_leds(yl_9200_leds, ARRAY_SIZE(yl_9200_leds));
+	/* VGA  */
+	/*this is self registered by including the s1d13xxx chip in the kernel build*/
+	yl_9200_add_device_video();
+	/* Push Buttons */
+	yl_9200_add_device_buttons();
+	/*TODO fixup the Sounder */
+//	yl_9200_add_device_sounder(yl_9200_sounder,ARRAY_SIZE(yl_9200_sounder));
+
+}
+
+MACHINE_START(YL9200, "uCdragon YL-9200")
+	/* Maintainer: S.Birtles*/
+	.phys_io		= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer			= &at91rm9200_timer,
+	.map_io			= yl_9200_map_io,
+	.init_irq		= yl_9200_init_irq,
+	.init_machine	= yl_9200_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index de6424e9ac02..a33dfe450726 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -23,7 +23,6 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 
-#include <asm/semaphore.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index f629c2b5f0c5..ee4964abcaf5 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -490,6 +490,11 @@ postcore_initcall(at91_gpio_debugfs_init);
 
 /*--------------------------------------------------------------------------*/
 
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 /*
  * Called from the processor-specific init to enable GPIO interrupt support.
  */
@@ -510,6 +515,8 @@ void __init at91_gpio_irq_setup(void)
 		__raw_writel(~0, this->regbase + PIO_IDR);
 
 		for (i = 0, pin = this->chipbase; i < 32; i++, pin++) {
+			lockdep_set_class(&irq_desc[pin].lock, &gpio_lock_class);
+
 			/*
 			 * Can use the "simple" and not "edge" handler since it's
 			 * shorter, and the AIC handles interrupts sanely.
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index a67defd50438..39733b6992aa 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -26,12 +26,135 @@
 #include <asm/mach-types.h>
 
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91rm9200_mc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/cpu.h>
 
 #include "generic.h"
 
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <asm/arch/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ */
+#define sdram_selfrefresh_enable()	at91_sys_write(AT91_SDRAMC_SRR, 1)
+#define sdram_selfrefresh_disable()	do {} while (0)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <asm/arch/at91cap9_ddrsdr.h>
+
+static u32 saved_lpr;
+
+static inline void sdram_selfrefresh_enable(void)
+{
+	u32 lpr;
+
+	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+}
+
+#define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <asm/arch/at91sam9_sdramc.h>
+
+static u32 saved_lpr;
+
+static inline void sdram_selfrefresh_enable(void)
+{
+	u32 lpr;
+
+	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+}
+
+#define sdram_selfrefresh_disable()	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+/*
+ * FIXME: The AT91SAM9263 has a second EBI controller which may have
+ *        additional SDRAM.  pm_slowclock.S will require a similar fix.
+ */
+
+#endif
+
+
+/*
+ * Show the reason for the previous system reset.
+ */
+#if defined(AT91_SHDWC)
+
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_shdwc.h>
+
+static void __init show_reset_status(void)
+{
+	static char reset[] __initdata = "reset";
+
+	static char general[] __initdata = "general";
+	static char wakeup[] __initdata = "wakeup";
+	static char watchdog[] __initdata = "watchdog";
+	static char software[] __initdata = "software";
+	static char user[] __initdata = "user";
+	static char unknown[] __initdata = "unknown";
+
+	static char signal[] __initdata = "signal";
+	static char rtc[] __initdata = "rtc";
+	static char rtt[] __initdata = "rtt";
+	static char restore[] __initdata = "power-restored";
+
+	char *reason, *r2 = reset;
+	u32 reset_type, wake_type;
+
+	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
+	wake_type = at91_sys_read(AT91_SHDW_SR);
+
+	switch (reset_type) {
+	case AT91_RSTC_RSTTYP_GENERAL:
+		reason = general;
+		break;
+	case AT91_RSTC_RSTTYP_WAKEUP:
+		/* board-specific code enabled the wakeup sources */
+		reason = wakeup;
+
+		/* "wakeup signal" */
+		if (wake_type & AT91_SHDW_WAKEUP0)
+			r2 = signal;
+		else {
+			r2 = reason;
+			if (wake_type & AT91_SHDW_RTTWK)	/* rtt wakeup */
+				reason = rtt;
+			else if (wake_type & AT91_SHDW_RTCWK)	/* rtc wakeup */
+				reason = rtc;
+			else if (wake_type == 0)	/* power-restored wakeup */
+				reason = restore;
+			else				/* unknown wakeup */
+				reason = unknown;
+		}
+		break;
+	case AT91_RSTC_RSTTYP_WATCHDOG:
+		reason = watchdog;
+		break;
+	case AT91_RSTC_RSTTYP_SOFTWARE:
+		reason = software;
+		break;
+	case AT91_RSTC_RSTTYP_USER:
+		reason = user;
+		break;
+	default:
+		reason = unknown;
+		break;
+	}
+	pr_info("AT91: Starting after %s %s\n", reason, r2);
+}
+#else
+static void __init show_reset_status(void) {}
+#endif
+
 
 static int at91_pm_valid_state(suspend_state_t state)
 {
@@ -125,6 +248,11 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
 static void (*slow_clock)(void);
 
+#ifdef CONFIG_AT91_SLOW_CLOCK
+extern void at91_slow_clock(void);
+extern u32 at91_slow_clock_sz;
+#endif
+
 
 static int at91_pm_enter(suspend_state_t state)
 {
@@ -158,11 +286,14 @@ static int at91_pm_enter(suspend_state_t state)
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
+#ifdef CONFIG_AT91_SLOW_CLOCK
+				/* copy slow_clock handler to SRAM, and call it */
+				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+#endif
 				slow_clock();
 				break;
 			} else {
-				/* DEVELOPMENT ONLY */
-				pr_info("AT91: PM - no slow clock mode yet ...\n");
+				pr_info("AT91: PM - no slow clock mode enabled ...\n");
 				/* FALLTHROUGH leaving master clock alone */
 			}
 
@@ -175,13 +306,15 @@ static int at91_pm_enter(suspend_state_t state)
 		case PM_SUSPEND_STANDBY:
 			/*
 			 * NOTE: the Wait-for-Interrupt instruction needs to be
-			 * in icache so the SDRAM stays in self-refresh mode until
-			 * the wakeup IRQ occurs.
+			 * in icache so no SDRAM accesses are needed until the
+			 * wakeup IRQ occurs and self-refresh is terminated.
 			 */
 			asm("b 1f; .align 5; 1:");
 			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-			at91_sys_write(AT91_SDRAMC_SRR, 1);	/* self-refresh mode */
-			/* fall though to next state */
+			sdram_selfrefresh_enable();
+			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
+			sdram_selfrefresh_disable();
+			break;
 
 		case PM_SUSPEND_ON:
 			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
@@ -196,6 +329,7 @@ static int at91_pm_enter(suspend_state_t state)
 			at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
 
 error:
+	sdram_selfrefresh_disable();
 	target_state = PM_SUSPEND_ON;
 	at91_irq_resume();
 	at91_gpio_resume();
@@ -220,21 +354,20 @@ static struct platform_suspend_ops at91_pm_ops ={
 
 static int __init at91_pm_init(void)
 {
-	printk("AT91: Power Management\n");
-
-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
-	/* REVISIT allocations of SRAM should be dynamically managed.
-	 * FIQ handlers and other components will want SRAM/TCM too...
-	 */
-	slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
-	memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
+#ifdef CONFIG_AT91_SLOW_CLOCK
+	slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
 #endif
 
-	/* Disable SDRAM low-power mode.  Cannot be used with self-refresh. */
+	pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
 	at91_sys_write(AT91_SDRAMC_LPR, 0);
+#endif
 
 	suspend_set_ops(&at91_pm_ops);
 
+	show_reset_status();
 	return 0;
 }
 arch_initcall(at91_pm_init);
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0e2b641268ad..dbaae5f746a1 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -31,6 +31,8 @@ config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
 	select ARCH_DISCONTIGMEM_ENABLE
+	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_SELECT_MEMORY_MODEL
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 0ecf99761feb..c1252ca9648e 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for the linux kernel.
 #
-obj-y			:= core.o clock.o
+obj-y			:= core.o clock.o gpio.o
 obj-m			:=
 obj-n			:=
 obj-			:=
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 91f6a07a51d5..8bc187240542 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -159,7 +159,7 @@ static const u8 int_type2_register_offset[3]	= { 0x94, 0xb0, 0x50 };
 static const u8 eoi_register_offset[3]		= { 0x98, 0xb4, 0x54 };
 static const u8 int_en_register_offset[3]	= { 0x9c, 0xb8, 0x5c };
 
-static void update_gpio_int_params(unsigned port)
+void ep93xx_gpio_update_int_params(unsigned port)
 {
 	BUG_ON(port > 2);
 
@@ -175,98 +175,10 @@ static void update_gpio_int_params(unsigned port)
 		EP93XX_GPIO_REG(int_en_register_offset[port]));
 }
 
-/* Port ordering is: A B F D E C G H */
-static const u8 data_register_offset[8] = {
-	0x00, 0x04, 0x30, 0x0c, 0x20, 0x08, 0x38, 0x40,
-};
-
-static const u8 data_direction_register_offset[8] = {
-	0x10, 0x14, 0x34, 0x1c, 0x24, 0x18, 0x3c, 0x44,
-};
-
-#define GPIO_IN		0
-#define GPIO_OUT	1
-
-static void ep93xx_gpio_set_direction(unsigned line, int direction)
-{
-	unsigned int data_direction_register;
-	unsigned long flags;
-	unsigned char v;
-
-	data_direction_register =
-		EP93XX_GPIO_REG(data_direction_register_offset[line >> 3]);
-
-	local_irq_save(flags);
-	if (direction == GPIO_OUT) {
-		if (line >= 0 && line <= EP93XX_GPIO_LINE_MAX_IRQ) {
-			/* Port A/B/F */
-			gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
-			update_gpio_int_params(line >> 3);
-		}
-
-		v = __raw_readb(data_direction_register);
-		v |= 1 << (line & 7);
-		__raw_writeb(v, data_direction_register);
-	} else if (direction == GPIO_IN) {
-		v = __raw_readb(data_direction_register);
-		v &= ~(1 << (line & 7));
-		__raw_writeb(v, data_direction_register);
-	}
-	local_irq_restore(flags);
-}
-
-int gpio_direction_input(unsigned gpio)
-{
-	if (gpio > EP93XX_GPIO_LINE_MAX)
-		return -EINVAL;
-
-	ep93xx_gpio_set_direction(gpio, GPIO_IN);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
-	if (gpio > EP93XX_GPIO_LINE_MAX)
-		return -EINVAL;
-
-	gpio_set_value(gpio, value);
-	ep93xx_gpio_set_direction(gpio, GPIO_OUT);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_direction_output);
-
-int gpio_get_value(unsigned gpio)
-{
-	unsigned int data_register;
-
-	data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
-
-	return !!(__raw_readb(data_register) & (1 << (gpio & 7)));
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-void gpio_set_value(unsigned gpio, int value)
+void ep93xx_gpio_int_mask(unsigned line)
 {
-	unsigned int data_register;
-	unsigned long flags;
-	unsigned char v;
-
-	data_register = EP93XX_GPIO_REG(data_register_offset[gpio >> 3]);
-
-	local_irq_save(flags);
-	v = __raw_readb(data_register);
-	if (value)
-		v |= 1 << (gpio & 7);
-	else
-		v &= ~(1 << (gpio & 7));
-	__raw_writeb(v, data_register);
-	local_irq_restore(flags);
+	gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
 }
-EXPORT_SYMBOL(gpio_set_value);
-
 
 /*************************************************************************
  * EP93xx IRQ handling
@@ -316,7 +228,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
 
 	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
-		update_gpio_int_params(port);
+		ep93xx_gpio_update_int_params(port);
 	}
 
 	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
@@ -332,7 +244,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
 	gpio_int_unmasked[port] &= ~port_mask;
-	update_gpio_int_params(port);
+	ep93xx_gpio_update_int_params(port);
 
 	__raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
 }
@@ -343,7 +255,7 @@ static void ep93xx_gpio_irq_mask(unsigned int irq)
 	int port = line >> 3;
 
 	gpio_int_unmasked[port] &= ~(1 << (line & 7));
-	update_gpio_int_params(port);
+	ep93xx_gpio_update_int_params(port);
 }
 
 static void ep93xx_gpio_irq_unmask(unsigned int irq)
@@ -352,7 +264,7 @@ static void ep93xx_gpio_irq_unmask(unsigned int irq)
 	int port = line >> 3;
 
 	gpio_int_unmasked[port] |= 1 << (line & 7);
-	update_gpio_int_params(port);
+	ep93xx_gpio_update_int_params(port);
 }
 
 
@@ -368,7 +280,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	const int port = gpio >> 3;
 	const int port_mask = 1 << (gpio & 7);
 
-	ep93xx_gpio_set_direction(gpio, GPIO_IN);
+	gpio_direction_output(gpio, gpio_get_value(gpio));
 
 	switch (type) {
 	case IRQT_RISING:
@@ -411,7 +323,7 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	desc->status &= ~IRQ_TYPE_SENSE_MASK;
 	desc->status |= type & IRQ_TYPE_SENSE_MASK;
 
-	update_gpio_int_params(port);
+	ep93xx_gpio_update_int_params(port);
 
 	return 0;
 }
@@ -549,6 +461,7 @@ static struct platform_device ep93xx_ohci_device = {
 	.resource	= ep93xx_ohci_resources,
 };
 
+extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
 {
@@ -562,6 +475,8 @@ void __init ep93xx_init_devices(void)
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(v, EP93XX_SYSCON_DEVICE_CONFIG);
 
+	ep93xx_gpio_init();
+
 	amba_device_register(&uart1_device, &iomem_resource);
 	amba_device_register(&uart2_device, &iomem_resource);
 	amba_device_register(&uart3_device, &iomem_resource);
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
new file mode 100644
index 000000000000..dc2e4c00d989
--- /dev/null
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -0,0 +1,158 @@
+/*
+ * linux/arch/arm/mach-ep93xx/gpio.c
+ *
+ * Generic EP93xx GPIO handling
+ *
+ * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * Based on code originally from:
+ *  linux/arch/arm/mach-ep93xx/core.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include <asm/arch/ep93xx-regs.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+
+struct ep93xx_gpio_chip {
+	struct gpio_chip	chip;
+
+	unsigned int		data_reg;
+	unsigned int		data_dir_reg;
+};
+
+#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip)
+
+/* From core.c */
+extern void ep93xx_gpio_int_mask(unsigned line);
+extern void ep93xx_gpio_update_int_params(unsigned port);
+
+static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+	unsigned long flags;
+	u8 v;
+
+	local_irq_save(flags);
+	v = __raw_readb(ep93xx_chip->data_dir_reg);
+	v &= ~(1 << offset);
+	__raw_writeb(v, ep93xx_chip->data_dir_reg);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int ep93xx_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int val)
+{
+	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+	unsigned long flags;
+	int line;
+	u8 v;
+
+	local_irq_save(flags);
+
+	/* Set the value */
+	v = __raw_readb(ep93xx_chip->data_reg);
+	if (val)
+		v |= (1 << offset);
+	else
+		v &= ~(1 << offset);
+	__raw_writeb(v, ep93xx_chip->data_reg);
+
+	/* Drive as an output */
+	line = chip->base + offset;
+	if (line <= EP93XX_GPIO_LINE_MAX_IRQ) {
+		/* Ports A/B/F */
+		ep93xx_gpio_int_mask(line);
+		ep93xx_gpio_update_int_params(line >> 3);
+	}
+
+	v = __raw_readb(ep93xx_chip->data_dir_reg);
+	v |= (1 << offset);
+	__raw_writeb(v, ep93xx_chip->data_dir_reg);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+
+	return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset));
+}
+
+static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+	unsigned long flags;
+	u8 v;
+
+	local_irq_save(flags);
+	v = __raw_readb(ep93xx_chip->data_reg);
+	if (val)
+		v |= (1 << offset);
+	else
+		v &= ~(1 << offset);
+	__raw_writeb(v, ep93xx_chip->data_reg);
+	local_irq_restore(flags);
+}
+
+static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip);
+	u8 data_reg, data_dir_reg;
+	int i;
+
+	data_reg = __raw_readb(ep93xx_chip->data_reg);
+	data_dir_reg = __raw_readb(ep93xx_chip->data_dir_reg);
+
+	for (i = 0; i < chip->ngpio; i++)
+		seq_printf(s, "GPIO %s%d: %s %s\n", chip->label, i,
+			   (data_reg & (1 << i)) ? "set" : "clear",
+			   (data_dir_reg & (1 << i)) ? "out" : "in");
+}
+
+#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio)			\
+	{								\
+		.chip = {						\
+			.label		  = name,			\
+			.direction_input  = ep93xx_gpio_direction_input, \
+			.direction_output = ep93xx_gpio_direction_output, \
+			.get		  = ep93xx_gpio_get,		\
+			.set		  = ep93xx_gpio_set,		\
+			.dbg_show	  = ep93xx_gpio_dbg_show,	\
+			.base		  = base_gpio,			\
+			.ngpio		  = 8,				\
+		},							\
+		.data_reg	= EP93XX_GPIO_REG(dr),			\
+		.data_dir_reg	= EP93XX_GPIO_REG(ddr),			\
+	}
+
+static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = {
+	EP93XX_GPIO_BANK("A", 0x00, 0x10, 0),
+	EP93XX_GPIO_BANK("B", 0x04, 0x14, 8),
+	EP93XX_GPIO_BANK("C", 0x30, 0x34, 40),
+	EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24),
+	EP93XX_GPIO_BANK("E", 0x20, 0x24, 32),
+	EP93XX_GPIO_BANK("F", 0x08, 0x18, 16),
+	EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48),
+	EP93XX_GPIO_BANK("H", 0x40, 0x44, 56),
+};
+
+void __init ep93xx_gpio_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++)
+		gpiochip_add(&ep93xx_gpio_banks[i].chip);
+}
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 7f31816896ad..45144ad2bed9 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -103,7 +103,7 @@ static void
 h720x_gpio_handler(unsigned int mask, unsigned int irq,
                  struct irq_desc *desc)
 {
-	IRQDBG("%s irq: %d\n",__FUNCTION__,irq);
+	IRQDBG("%s irq: %d\n", __func__, irq);
 	desc = irq_desc + irq;
 	while (mask) {
 		if (mask & 1) {
@@ -123,7 +123,7 @@ h720x_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 
 	mask = CPU_REG(GPIO_A_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOA(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -133,7 +133,7 @@ h720x_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 	unsigned int mask, irq;
 	mask = CPU_REG(GPIO_B_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOB(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -144,7 +144,7 @@ h720x_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 
 	mask = CPU_REG(GPIO_C_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOC(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -155,7 +155,7 @@ h720x_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 
 	mask = CPU_REG(GPIO_D_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOD(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 
@@ -167,7 +167,7 @@ h720x_gpioe_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
 
 	mask = CPU_REG(GPIO_E_VIRT,GPIO_STAT);
 	irq = IRQ_CHAINED_GPIOE(0);
-	IRQDBG("%s mask: 0x%08x irq: %d\n",__FUNCTION__,mask,irq);
+	IRQDBG("%s mask: 0x%08x irq: %d\n", __func__, mask,irq);
 	h720x_gpio_handler(mask, irq, desc);
 }
 #endif
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index bc6fb02d213b..a59ff2987cb7 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -54,7 +54,7 @@ static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
 
 	if (!imxdma->name) {
 		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return 0;
 	}
 
@@ -288,7 +288,7 @@ imx_dma_setup_handlers(imx_dmach_t dma_ch,
 
 	if (!imxdma->name) {
 		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return -ENODEV;
 	}
 
@@ -321,7 +321,7 @@ void imx_dma_enable(imx_dmach_t dma_ch)
 
 	if (!imxdma->name) {
 		printk(KERN_CRIT "%s: called for  not allocated channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return;
 	}
 
@@ -365,7 +365,7 @@ int imx_dma_request(imx_dmach_t dma_ch, const char *name)
 
 	if (dma_ch >= IMX_DMA_CHANNELS) {
 		printk(KERN_CRIT "%s: called for  non-existed channel %d\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return -EINVAL;
 	}
 
@@ -396,7 +396,7 @@ void imx_dma_free(imx_dmach_t dma_ch)
 	if (!imxdma->name) {
 		printk(KERN_CRIT
 		       "%s: trying to free channel %d which is already freed\n",
-		       __FUNCTION__, dma_ch);
+		       __func__, dma_ch);
 		return;
 	}
 
@@ -456,7 +456,7 @@ imx_dma_request_by_prio(imx_dmach_t * pdma_ch, const char *name,
 		}
 	}
 
-	printk(KERN_ERR "%s: no free DMA channel found\n", __FUNCTION__);
+	printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
 
 	return -ENODEV;
 }
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index a7465db84893..e6695c4e623b 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -160,21 +160,21 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 static void
 imx_gpio_ack_irq(unsigned int irq)
 {
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
 	ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
 }
 
 static void
 imx_gpio_mask_irq(unsigned int irq)
 {
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
 	IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
 }
 
 static void
 imx_gpio_unmask_irq(unsigned int irq)
 {
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, irq);
 	IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
 }
 
diff --git a/arch/arm/mach-integrator/clock.c b/arch/arm/mach-integrator/clock.c
index 95a1e263f7fa..8d761fdd2ecd 100644
--- a/arch/arm/mach-integrator/clock.c
+++ b/arch/arm/mach-integrator/clock.c
@@ -17,7 +17,6 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
-#include <asm/semaphore.h>
 #include <asm/hardware/icst525.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-integrator/time.c b/arch/arm/mach-integrator/time.c
index 5278f589fcee..5235f64f235b 100644
--- a/arch/arm/mach-integrator/time.c
+++ b/arch/arm/mach-integrator/time.c
@@ -125,7 +125,7 @@ static int rtc_probe(struct amba_device *dev, void *id)
 	xtime.tv_sec = __raw_readl(rtc_base + RTC_DR);
 
 	ret = request_irq(dev->irq[0], arm_rtc_interrupt, IRQF_DISABLED,
-			  "rtc-pl030", dev);
+			  "rtc-pl030", NULL);
 	if (ret)
 		goto map_out;
 
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 268a8d84999c..77b24cd1d88d 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -81,7 +81,7 @@ static void __init iq81340mc_init(void)
 static void __init iq81340mc_timer_init(void)
 {
 	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
-	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
 	iop_init_time(bus_freq);
 }
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index a51ffd2683e5..e8522b3b8163 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -83,7 +83,7 @@ static void __init iq81340sc_init(void)
 static void __init iq81340sc_timer_init(void)
 {
 	unsigned long bus_freq = iop13xx_core_freq() / iop13xx_xsi_bus_ratio();
-	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __FUNCTION__, bus_freq);
+	printk(KERN_DEBUG "%s: bus frequency: %lu\n", __func__, bus_freq);
 	iop_init_time(bus_freq);
 }
 
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 99d94cb1bafd..7825c1aaa27b 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -94,13 +94,13 @@ void iop13xx_map_pci_memory(void)
 					, 0, iop13xx_atux_mem_size, MT_DEVICE);
 					if (!iop13xx_atux_mem_base) {
 						printk("%s: atux allocation "
-						       "failed\n", __FUNCTION__);
+						       "failed\n", __func__);
 						BUG();
 					}
 				} else
 					iop13xx_atux_mem_size = 0;
 				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
-				__FUNCTION__, atu, iop13xx_atux_mem_size,
+				__func__, atu, iop13xx_atux_mem_size,
 				iop13xx_atux_mem_base);
 				break;
 			case 1:
@@ -120,13 +120,13 @@ void iop13xx_map_pci_memory(void)
 					, 0, iop13xx_atue_mem_size, MT_DEVICE);
 					if (!iop13xx_atue_mem_base) {
 						printk("%s: atue allocation "
-						       "failed\n", __FUNCTION__);
+						       "failed\n", __func__);
 						BUG();
 					}
 				} else
 					iop13xx_atue_mem_size = 0;
 				PRINTK("%s: atu: %d bus_size: %d mem_base: %x\n",
-				__FUNCTION__, atu, iop13xx_atue_mem_size,
+				__func__, atu, iop13xx_atue_mem_size,
 				iop13xx_atue_mem_base);
 				break;
 			}
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index bfe0c87e3397..246f6d478720 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -519,7 +519,7 @@ void __init iop13xx_platform_init(void)
 	if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
 		iop13xx_devices[plat_idx++] = &iq8134x_flash;
 	else
-		printk(KERN_ERR "%s: Failed to probe flash size\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
 #endif
 
 	platform_add_devices(iop13xx_devices, plat_idx);
diff --git a/arch/arm/mach-iop32x/Kconfig b/arch/arm/mach-iop32x/Kconfig
index dbe07c9472ed..5e8c6f7dfabb 100644
--- a/arch/arm/mach-iop32x/Kconfig
+++ b/arch/arm/mach-iop32x/Kconfig
@@ -34,14 +34,6 @@ config MACH_N2100
 	  Say Y here if you want to run your kernel on the Thecus n2100
 	  NAS appliance.
 
-config IOP3XX_ATU
-        bool "Enable the PCI Controller"
-        default y
-        help
-          Say Y here if you want the IOP to initialize its PCI Controller.
-          Say N if the IOP is an add in card, the host system owns the PCI
-          bus in this case.
-
 config MACH_EM7210
 	bool "Enable support for the Lanner EM7210"
 	help
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 74c65ce221de..d2a7b04f1cb0 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -14,8 +14,10 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/f75375s.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/pm.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/serial_core.h>
@@ -167,11 +169,21 @@ static struct platform_device glantank_serial_device = {
 	.resource	= &glantank_uart_resource,
 };
 
+static struct f75375s_platform_data glantank_f75375s = {
+	.pwm		= { 255, 255 },
+	.pwm_enable	= { 0, 0 },
+};
+
 static struct i2c_board_info __initdata glantank_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
 		.type = "rs5c372a",
 	},
+	{
+		I2C_BOARD_INFO("f75375", 0x2e),
+		.type = "f75375",
+		.platform_data = &glantank_f75375s,
+	},
 };
 
 static void glantank_power_off(void)
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 98cfa1cd6bdb..4a89823bcebb 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -178,10 +178,9 @@ static struct hw_pci iq31244_pci __initdata = {
 
 static int __init iq31244_pci_init(void)
 {
-	if (is_ep80219()) {
-		if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE)
-			pci_common_init(&ep80219_pci);
-	} else if (machine_is_iq31244()) {
+	if (is_ep80219())
+		pci_common_init(&ep80219_pci);
+	else if (machine_is_iq31244()) {
 		if (is_80219()) {
 			printk("note: iq31244 board type has been selected\n");
 			printk("note: to select ep80219 operation:\n");
@@ -190,9 +189,7 @@ static int __init iq31244_pci_init(void)
 			printk("\t2/ update boot loader to pass"
 				" the ep80219 id: %d\n", MACH_TYPE_EP80219);
 		}
-
-		if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE)
-			pci_common_init(&iq31244_pci);
+		pci_common_init(&iq31244_pci);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 18ad29f213b2..1da3c911edd3 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -106,7 +106,7 @@ static struct hw_pci iq80321_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
 	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
+	.preinit	= iop3xx_pci_preinit_cond,
 	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80321_pci_map_irq,
 };
diff --git a/arch/arm/mach-iop33x/Kconfig b/arch/arm/mach-iop33x/Kconfig
index 45598e096898..9aa016bb18f9 100644
--- a/arch/arm/mach-iop33x/Kconfig
+++ b/arch/arm/mach-iop33x/Kconfig
@@ -16,14 +16,6 @@ config MACH_IQ80332
 	  Say Y here if you want to run your kernel on the Intel IQ80332
 	  evaluation kit for the IOP332 chipset.
 
-config IOP3XX_ATU
-	bool "Enable the PCI Controller"
-	default y
-	help
-	  Say Y here if you want the IOP to initialize its PCI Controller.
-	  Say N if the IOP is an add in card, the host system owns the PCI
-	  bus in this case.
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 433188ebff2a..de39fd778579 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -89,7 +89,7 @@ static struct hw_pci iq80331_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
 	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
+	.preinit	= iop3xx_pci_preinit_cond,
 	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80331_pci_map_irq,
 };
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 416c09564cc6..4904fd78445f 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -89,7 +89,7 @@ static struct hw_pci iq80332_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
 	.nr_controllers = 1,
 	.setup		= iop3xx_pci_setup,
-	.preinit	= iop3xx_pci_preinit,
+	.preinit	= iop3xx_pci_preinit_cond,
 	.scan		= iop3xx_pci_scan_bus,
 	.map_irq	= iq80332_pci_map_irq,
 };
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index bf04121d1a31..64be341109b3 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -87,7 +87,7 @@ static inline int check_master_abort(void)
 	if (isr & PCI_ISR_PFE) {
 		/* make sure the Master Abort bit is reset */    
 		*PCI_ISR = PCI_ISR_PFE;
-		pr_debug("%s failed\n", __FUNCTION__);
+		pr_debug("%s failed\n", __func__);
 		return 1;
 	}
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 0d5a42455820..49dec7868807 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -65,7 +65,7 @@ static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	else
 		rc = gtwx5715_irqmap[slot][pin-1];
 
-	printk("%s: Mapped slot %d pin %d to IRQ %d\n", __FUNCTION__,slot, pin, rc);
+	printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc);
 	return(rc);
 }
 
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 730a3af12c98..ade42b73afbb 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -11,5 +11,8 @@ obj-				:=
 # PCI support is optional
 obj-$(CONFIG_PCI)		+= pci.o
 
+# LEDs
+obj-$(CONFIG_LEDS)		+= leds.o
+
 # Board-specific support
 obj-$(CONFIG_MACH_KS8695)	+= board-micrel.o
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 386593f8ac65..3db2ec61d06f 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -176,6 +176,27 @@ static void __init ks8695_add_device_watchdog(void) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  LEDs
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_LEDS)
+short ks8695_leds_cpu = -1;
+short ks8695_leds_timer = -1;
+
+void __init ks8695_init_leds(u8 cpu_led, u8 timer_led)
+{
+	/* Enable GPIO to access the LEDs */
+	gpio_direction_output(cpu_led, 1);
+	gpio_direction_output(timer_led, 1);
+
+	ks8695_leds_cpu   = cpu_led;
+	ks8695_leds_timer = timer_led;
+}
+#else
+void __init ks8695_init_leds(u8 cpu_led, u8 timer_led) {}
+#endif
+
 /* -------------------------------------------------------------------- */
 
 /*
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
new file mode 100644
index 000000000000..d61762ae50d8
--- /dev/null
+++ b/arch/arm/mach-ks8695/leds.c
@@ -0,0 +1,94 @@
+/*
+ * LED driver for KS8695-based boards.
+ *
+ * Copyright (C) Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include <asm/mach-types.h>
+#include <asm/leds.h>
+#include <asm/arch/devices.h>
+#include <asm/arch/gpio.h>
+
+
+static inline void ks8695_led_on(unsigned int led)
+{
+	gpio_set_value(led, 0);
+}
+
+static inline void ks8695_led_off(unsigned int led)
+{
+	gpio_set_value(led, 1);
+}
+
+static inline void ks8695_led_toggle(unsigned int led)
+{
+	unsigned long is_off = gpio_get_value(led);
+	if (is_off)
+		ks8695_led_on(led);
+	else
+		ks8695_led_off(led);
+}
+
+
+/*
+ * Handle LED events.
+ */
+static void ks8695_leds_event(led_event_t evt)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	switch(evt) {
+	case led_start:		/* System startup */
+		ks8695_led_on(ks8695_leds_cpu);
+		break;
+
+	case led_stop:		/* System stop / suspend */
+		ks8695_led_off(ks8695_leds_cpu);
+		break;
+
+#ifdef CONFIG_LEDS_TIMER
+	case led_timer:		/* Every 50 timer ticks */
+		ks8695_led_toggle(ks8695_leds_timer);
+		break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+	case led_idle_start:	/* Entering idle state */
+		ks8695_led_off(ks8695_leds_cpu);
+		break;
+
+	case led_idle_end:	/* Exit idle state */
+		ks8695_led_on(ks8695_leds_cpu);
+		break;
+#endif
+
+	default:
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+
+static int __init leds_init(void)
+{
+	if ((ks8695_leds_timer == -1) || (ks8695_leds_cpu == -1))
+		return -ENODEV;
+
+	leds_event = ks8695_leds_event;
+
+	leds_event(led_start);
+	return 0;
+}
+
+__initcall(leds_init);
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index b9ca8f98265d..fd7537f7d11e 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -133,7 +133,7 @@ netx_hif_ack_irq(unsigned int _irq)
 	val &= ~((1 << 24) << irq);
 	writel(val, NETX_DPMAS_INT_EN);
 
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
 }
 
 static void
@@ -145,7 +145,7 @@ netx_hif_mask_irq(unsigned int _irq)
 	val = readl(NETX_DPMAS_INT_EN);
 	val &= ~((1 << 24) << irq);
 	writel(val, NETX_DPMAS_INT_EN);
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
 }
 
 static void
@@ -157,7 +157,7 @@ netx_hif_unmask_irq(unsigned int _irq)
 	val = readl(NETX_DPMAS_INT_EN);
 	val |= (1 << 24) << irq;
 	writel(val, NETX_DPMAS_INT_EN);
-	DEBUG_IRQ("%s: irq %d\n", __FUNCTION__, _irq);
+	DEBUG_IRQ("%s: irq %d\n", __func__, _irq);
 }
 
 static struct irq_chip netx_hif_chip = {
diff --git a/arch/arm/mach-ns9xxx/Kconfig b/arch/arm/mach-ns9xxx/Kconfig
index 8584ed107991..dd0cd5ac4b8b 100644
--- a/arch/arm/mach-ns9xxx/Kconfig
+++ b/arch/arm/mach-ns9xxx/Kconfig
@@ -2,9 +2,26 @@ if ARCH_NS9XXX
 
 menu "NS9xxx Implementations"
 
+config NS9XXX_HAVE_SERIAL8250
+	bool
+
+config PROCESSOR_NS9360
+	bool
+
+config MODULE_CC9P9360
+	bool
+	select PROCESSOR_NS9360
+
+config BOARD_A9M9750DEV
+	select NS9XXX_HAVE_SERIAL8250
+	bool
+
+config BOARD_JSCC9P9360
+	bool
+
 config MACH_CC9P9360DEV
 	bool "ConnectCore 9P 9360 on an A9M9750 Devboard"
-	select PROCESSOR_NS9360
+	select MODULE_CC9P9360
 	select BOARD_A9M9750DEV
 	help
 	  Say Y here if you are using the Digi ConnectCore 9P 9360
@@ -12,21 +29,12 @@ config MACH_CC9P9360DEV
 
 config MACH_CC9P9360JS
 	bool "ConnectCore 9P 9360 on a JSCC9P9360 Devboard"
-	select PROCESSOR_NS9360
+	select MODULE_CC9P9360
 	select BOARD_JSCC9P9360
 	help
 	  Say Y here if you are using the Digi ConnectCore 9P 9360
 	  on an JSCC9P9360 Development Board.
 
-config PROCESSOR_NS9360
-	bool
-
-config BOARD_A9M9750DEV
-	bool
-
-config BOARD_JSCC9P9360
-	bool
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-ns9xxx/Makefile b/arch/arm/mach-ns9xxx/Makefile
index 6fb82b855a55..41efaf9ad50b 100644
--- a/arch/arm/mach-ns9xxx/Makefile
+++ b/arch/arm/mach-ns9xxx/Makefile
@@ -1,7 +1,12 @@
-obj-y := irq.o time.o generic.o gpio.o
+obj-y := clock.o generic.o gpio.o irq.o
 
 obj-$(CONFIG_MACH_CC9P9360DEV) += mach-cc9p9360dev.o
 obj-$(CONFIG_MACH_CC9P9360JS) += mach-cc9p9360js.o
 
+obj-$(CONFIG_PROCESSOR_NS9360) += gpio-ns9360.o processor-ns9360.o time-ns9360.o
+
 obj-$(CONFIG_BOARD_A9M9750DEV) += board-a9m9750dev.o
 obj-$(CONFIG_BOARD_JSCC9P9360) += board-jscc9p9360.o
+
+# platform devices
+obj-$(CONFIG_NS9XXX_HAVE_SERIAL8250) += plat-serial8250.o
diff --git a/arch/arm/mach-ns9xxx/Makefile.boot b/arch/arm/mach-ns9xxx/Makefile.boot
index 75ed64e90fa4..54654919229b 100644
--- a/arch/arm/mach-ns9xxx/Makefile.boot
+++ b/arch/arm/mach-ns9xxx/Makefile.boot
@@ -1,2 +1,2 @@
-zreladdr-y := 0x108000
+zreladdr-y := 0x8000
 params_phys-y := 0x100
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index 0f65177f9e5f..a494b71c0195 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -8,15 +8,14 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
 #include <linux/irq.h>
 
 #include <asm/mach/map.h>
 #include <asm/gpio.h>
 
 #include <asm/arch-ns9xxx/board.h>
-#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
 #include <asm/arch-ns9xxx/regs-mem.h>
 #include <asm/arch-ns9xxx/regs-bbu.h>
 #include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
@@ -105,9 +104,9 @@ void __init board_a9m9750dev_init_irq(void)
 	int i;
 
 	if (gpio_request(11, "board a9m9750dev extirq2") == 0)
-		ns9xxx_gpio_configure(11, 0, 1);
+		ns9360_gpio_configure(11, 0, 1);
 	else
-		printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_EXT2\n",
+		printk(KERN_ERR "%s: cannot get gpio 11 for IRQ_NS9XXX_EXT2\n",
 				__func__);
 
 	for (i = FPGA_IRQ(0); i <= FPGA_IRQ(7); ++i) {
@@ -116,69 +115,16 @@ void __init board_a9m9750dev_init_irq(void)
 		set_irq_flags(i, IRQF_VALID);
 	}
 
-	/* IRQ_EXT2: level sensitive + active low */
+	/* IRQ_NS9XXX_EXT2: level sensitive + active low */
 	eic = __raw_readl(SYS_EIC(2));
 	REGSET(eic, SYS_EIC, PLTY, AL);
 	REGSET(eic, SYS_EIC, LVEDG, LEVEL);
 	__raw_writel(eic, SYS_EIC(2));
 
-	set_irq_chained_handler(IRQ_EXT2,
+	set_irq_chained_handler(IRQ_NS9XXX_EXT2,
 			a9m9750dev_fpga_demux_handler);
 }
 
-static struct plat_serial8250_port board_a9m9750dev_serial8250_port[] = {
-	{
-		.iobase         = FPGA_UARTA_BASE,
-		.membase        = (unsigned char*)FPGA_UARTA_BASE,
-		.mapbase        = FPGA_UARTA_BASE,
-		.irq            = IRQ_FPGA_UARTA,
-		.iotype         = UPIO_MEM,
-		.uartclk        = 18432000,
-		.regshift       = 0,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
-	}, {
-		.iobase         = FPGA_UARTB_BASE,
-		.membase        = (unsigned char*)FPGA_UARTB_BASE,
-		.mapbase        = FPGA_UARTB_BASE,
-		.irq            = IRQ_FPGA_UARTB,
-		.iotype         = UPIO_MEM,
-		.uartclk        = 18432000,
-		.regshift       = 0,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
-	}, {
-		.iobase         = FPGA_UARTC_BASE,
-		.membase        = (unsigned char*)FPGA_UARTC_BASE,
-		.mapbase        = FPGA_UARTC_BASE,
-		.irq            = IRQ_FPGA_UARTC,
-		.iotype         = UPIO_MEM,
-		.uartclk        = 18432000,
-		.regshift       = 0,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
-	}, {
-		.iobase         = FPGA_UARTD_BASE,
-		.membase        = (unsigned char*)FPGA_UARTD_BASE,
-		.mapbase        = FPGA_UARTD_BASE,
-		.irq            = IRQ_FPGA_UARTD,
-		.iotype         = UPIO_MEM,
-		.uartclk        = 18432000,
-		.regshift       = 0,
-		.flags          = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
-	}, {
-		/* end marker */
-	},
-};
-
-static struct platform_device board_a9m9750dev_serial_device = {
-	.name = "serial8250",
-	.dev = {
-		.platform_data = board_a9m9750dev_serial8250_port,
-	},
-};
-
-static struct platform_device *board_a9m9750dev_devices[] __initdata = {
-	&board_a9m9750dev_serial_device,
-};
-
 void __init board_a9m9750dev_init_machine(void)
 {
 	u32 reg;
@@ -210,7 +156,4 @@ void __init board_a9m9750dev_init_machine(void)
 	__raw_writel(0x2, MEM_SMOED(0));
 	__raw_writel(0x6, MEM_SMRD(0));
 	__raw_writel(0x6, MEM_SMWD(0));
-
-	platform_add_devices(board_a9m9750dev_devices,
-			ARRAY_SIZE(board_a9m9750dev_devices));
 }
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
new file mode 100644
index 000000000000..f8639161068f
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-ns9xxx/clock.c
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <asm/semaphore.h>
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DEFINE_SPINLOCK(clk_lock);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *ret = NULL, *retgen = NULL;
+	unsigned long flags;
+	int idno;
+
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	list_for_each_entry(p, &clocks, node) {
+		if (strcmp(id, p->name) == 0) {
+			if (p->id == idno) {
+				if (!try_module_get(p->owner))
+					continue;
+				ret = p;
+				break;
+			} else if (p->id == -1)
+				/* remember match with id == -1 in case there is
+				 * no clock for idno */
+				retgen = p;
+		}
+	}
+
+	if (!ret && retgen && try_module_get(retgen->owner))
+		ret = retgen;
+
+	if (ret)
+		++ret->refcount;
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return ret ? ret : ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+	--clk->refcount;
+}
+EXPORT_SYMBOL(clk_put);
+
+static int clk_enable_unlocked(struct clk *clk)
+{
+	int ret = 0;
+	if (clk->parent) {
+		ret = clk_enable_unlocked(clk->parent);
+		if (ret)
+			return ret;
+	}
+
+	if (clk->usage++ == 0 && clk->endisable)
+		ret = clk->endisable(clk, 1);
+
+	return ret;
+}
+
+int clk_enable(struct clk *clk)
+{
+	int ret;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	ret = clk_enable_unlocked(clk);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL(clk_enable);
+
+static void clk_disable_unlocked(struct clk *clk)
+{
+	if (--clk->usage == 0 && clk->endisable)
+		clk->endisable(clk, 0);
+
+	if (clk->parent)
+		clk_disable_unlocked(clk->parent);
+}
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	clk_disable_unlocked(clk);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	if (clk->get_rate)
+		return clk->get_rate(clk);
+
+	if (clk->rate)
+		return clk->rate;
+
+	if (clk->parent)
+		return clk_get_rate(clk->parent);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+int clk_register(struct clk *clk)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	list_add(&clk->node, &clocks);
+
+	if (clk->parent)
+		++clk->parent->refcount;
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+
+int clk_unregister(struct clk *clk)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	if (clk->usage || clk->refcount)
+		ret = -EBUSY;
+	else
+		list_del(&clk->node);
+
+	if (clk->parent)
+		--clk->parent->refcount;
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return ret;
+}
+
+#if defined CONFIG_DEBUG_FS
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+static int clk_debugfs_show(struct seq_file *s, void *null)
+{
+	unsigned long flags;
+	struct clk *p;
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	list_for_each_entry(p, &clocks, node)
+		seq_printf(s, "%s.%d: usage=%lu refcount=%lu rate=%lu\n",
+				p->name, p->id, p->usage, p->refcount,
+				p->usage ? clk_get_rate(p) : 0);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+
+static int clk_debugfs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, clk_debugfs_show, NULL);
+}
+
+static struct file_operations clk_debugfs_operations = {
+	.open = clk_debugfs_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static int __init clk_debugfs_init(void)
+{
+	struct dentry *dentry;
+
+	dentry = debugfs_create_file("clk", S_IFREG | S_IRUGO, NULL, NULL,
+			&clk_debugfs_operations);
+	return IS_ERR(dentry) ? PTR_ERR(dentry) : 0;
+}
+subsys_initcall(clk_debugfs_init);
+
+#endif /* if defined CONFIG_DEBUG_FS */
diff --git a/arch/arm/mach-ns9xxx/clock.h b/arch/arm/mach-ns9xxx/clock.h
new file mode 100644
index 000000000000..b86c30dd79eb
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/clock.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ns9xxx/clock.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __NS9XXX_CLOCK_H
+#define __NS9XXX_CLOCK_H
+
+#include <linux/list.h>
+
+struct clk {
+	struct module *owner;
+	const char *name;
+	int id;
+
+	struct clk *parent;
+
+	unsigned long rate;
+	int (*endisable)(struct clk *, int enable);
+	unsigned long (*get_rate)(struct clk *);
+
+	struct list_head node;
+	unsigned long refcount;
+	unsigned long usage;
+};
+
+int clk_register(struct clk *clk);
+int clk_unregister(struct clk *clk);
+
+#endif /* ifndef __NS9XXX_CLOCK_H */
diff --git a/arch/arm/mach-ns9xxx/generic.c b/arch/arm/mach-ns9xxx/generic.c
index d742c921e34d..1e0f467879cc 100644
--- a/arch/arm/mach-ns9xxx/generic.c
+++ b/arch/arm/mach-ns9xxx/generic.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ns9xxx/generic.c
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -11,34 +11,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/memory.h>
-#include <asm/page.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/arch-ns9xxx/regs-sys.h>
-#include <asm/arch-ns9xxx/regs-mem.h>
-#include <asm/arch-ns9xxx/board.h>
 
 #include "generic.h"
 
-static struct map_desc standard_io_desc[] __initdata = {
-	{ /* BBus */
-		.virtual = io_p2v(0x90000000),
-		.pfn = __phys_to_pfn(0x90000000),
-		.length = 0x00700000,
-		.type = MT_DEVICE,
-	}, { /* AHB */
-		.virtual = io_p2v(0xa0100000),
-		.pfn = __phys_to_pfn(0xa0100000),
-		.length = 0x00900000,
-		.type = MT_DEVICE,
-	},
-};
-
-void __init ns9xxx_map_io(void)
-{
-	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
-}
-
 void __init ns9xxx_init_machine(void)
 {
 }
diff --git a/arch/arm/mach-ns9xxx/generic.h b/arch/arm/mach-ns9xxx/generic.h
index 687e291773f4..82493191aad6 100644
--- a/arch/arm/mach-ns9xxx/generic.h
+++ b/arch/arm/mach-ns9xxx/generic.h
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ns9xxx/generic.h
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -13,7 +13,4 @@
 #include <linux/init.h>
 
 void __init ns9xxx_init_irq(void);
-void __init ns9xxx_map_io(void);
 void __init ns9xxx_init_machine(void);
-
-extern struct sys_timer ns9xxx_timer;
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
new file mode 100644
index 000000000000..cabfb879dda9
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -0,0 +1,118 @@
+/*
+ * arch/arm/mach-ns9xxx/gpio-ns9360.c
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/bug.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <asm/arch-ns9xxx/regs-bbu.h>
+#include <asm/arch-ns9xxx/processor-ns9360.h>
+
+#include "gpio-ns9360.h"
+
+static inline int ns9360_valid_gpio(unsigned gpio)
+{
+	return gpio <= 72;
+}
+
+static inline void __iomem *ns9360_gpio_get_gconfaddr(unsigned gpio)
+{
+	if (gpio < 56)
+		return BBU_GCONFb1(gpio / 8);
+	else
+		/*
+		 * this could be optimised away on
+		 * ns9750 only builds, but it isn't ...
+		 */
+		return BBU_GCONFb2((gpio - 56) / 8);
+}
+
+static inline void __iomem *ns9360_gpio_get_gctrladdr(unsigned gpio)
+{
+	if (gpio < 32)
+		return BBU_GCTRL1;
+	else if (gpio < 64)
+		return BBU_GCTRL2;
+	else
+		/* this could be optimised away on ns9750 only builds */
+		return BBU_GCTRL3;
+}
+
+static inline void __iomem *ns9360_gpio_get_gstataddr(unsigned gpio)
+{
+	if (gpio < 32)
+		return BBU_GSTAT1;
+	else if (gpio < 64)
+		return BBU_GSTAT2;
+	else
+		/* this could be optimised away on ns9750 only builds */
+		return BBU_GSTAT3;
+}
+
+/*
+ * each gpio can serve for 4 different purposes [0..3].  These are called
+ * "functions" and passed in the parameter func.  Functions 0-2 are always some
+ * special things, function 3 is GPIO.  If func == 3 dir specifies input or
+ * output, and with inv you can enable an inverter (independent of func).
+ */
+int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func)
+{
+	void __iomem *conf = ns9360_gpio_get_gconfaddr(gpio);
+	u32 confval;
+
+	confval = __raw_readl(conf);
+	REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir);
+	REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv);
+	REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func);
+	__raw_writel(confval, conf);
+
+	return 0;
+}
+
+int ns9360_gpio_configure(unsigned gpio, int inv, int func)
+{
+	if (likely(ns9360_valid_gpio(gpio))) {
+		if (func == 3) {
+			printk(KERN_WARNING "use gpio_direction_input "
+					"or gpio_direction_output\n");
+			return -EINVAL;
+		} else
+			return __ns9360_gpio_configure(gpio, 0, inv, func);
+	} else
+		return -EINVAL;
+}
+EXPORT_SYMBOL(ns9360_gpio_configure);
+
+int ns9360_gpio_get_value(unsigned gpio)
+{
+	void __iomem *stat = ns9360_gpio_get_gstataddr(gpio);
+	int ret;
+
+	ret = 1 & (__raw_readl(stat) >> (gpio & 31));
+
+	return ret;
+}
+
+void ns9360_gpio_set_value(unsigned gpio, int value)
+{
+	void __iomem *ctrl = ns9360_gpio_get_gctrladdr(gpio);
+	u32 ctrlval;
+
+	ctrlval = __raw_readl(ctrl);
+
+	if (value)
+		ctrlval |= 1 << (gpio & 31);
+	else
+		ctrlval &= ~(1 << (gpio & 31));
+
+	__raw_writel(ctrlval, ctrl);
+}
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.h b/arch/arm/mach-ns9xxx/gpio-ns9360.h
new file mode 100644
index 000000000000..131cd1715caa
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ns9xxx/gpio-ns9360.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+int __ns9360_gpio_configure(unsigned gpio, int dir, int inv, int func);
+int ns9360_gpio_get_value(unsigned gpio);
+void ns9360_gpio_set_value(unsigned gpio, int value);
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index b2230213b983..b3c963b0c8f5 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ns9xxx/gpio.c
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -15,12 +15,13 @@
 
 #include <asm/arch-ns9xxx/gpio.h>
 #include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/io.h>
+#include <asm/arch-ns9xxx/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
 #include <asm/bitops.h>
 
+#include "gpio-ns9360.h"
+
 #if defined(CONFIG_PROCESSOR_NS9360)
 #define GPIO_MAX 72
 #elif defined(CONFIG_PROCESSOR_NS9750)
@@ -31,7 +32,7 @@
 static spinlock_t gpio_lock = __SPIN_LOCK_UNLOCKED(gpio_lock);
 
 /* only access gpiores with atomic ops */
-static DECLARE_BITMAP(gpiores, GPIO_MAX);
+static DECLARE_BITMAP(gpiores, GPIO_MAX + 1);
 
 static inline int ns9xxx_valid_gpio(unsigned gpio)
 {
@@ -45,41 +46,10 @@ static inline int ns9xxx_valid_gpio(unsigned gpio)
 		return gpio <= 49;
 	else
 #endif
+	{
 		BUG();
-}
-
-static inline void __iomem *ns9xxx_gpio_get_gconfaddr(unsigned gpio)
-{
-	if (gpio < 56)
-		return BBU_GCONFb1(gpio / 8);
-	else
-		/*
-		 * this could be optimised away on
-		 * ns9750 only builds, but it isn't ...
-		 */
-		return BBU_GCONFb2((gpio - 56) / 8);
-}
-
-static inline void __iomem *ns9xxx_gpio_get_gctrladdr(unsigned gpio)
-{
-	if (gpio < 32)
-		return BBU_GCTRL1;
-	else if (gpio < 64)
-		return BBU_GCTRL2;
-	else
-		/* this could be optimised away on ns9750 only builds */
-		return BBU_GCTRL3;
-}
-
-static inline void __iomem *ns9xxx_gpio_get_gstataddr(unsigned gpio)
-{
-	if (gpio < 32)
-		return BBU_GSTAT1;
-	else if (gpio < 64)
-		return BBU_GSTAT2;
-	else
-		/* this could be optimised away on ns9750 only builds */
-		return BBU_GSTAT3;
+		return 0;
+	}
 }
 
 int gpio_request(unsigned gpio, const char *label)
@@ -98,49 +68,24 @@ void gpio_free(unsigned gpio)
 }
 EXPORT_SYMBOL(gpio_free);
 
-/*
- * each gpio can serve for 4 different purposes [0..3].  These are called
- * "functions" and passed in the parameter func.  Functions 0-2 are always some
- * special things, function 3 is GPIO.  If func == 3 dir specifies input or
- * output, and with inv you can enable an inverter (independent of func).
- */
-static int __ns9xxx_gpio_configure(unsigned gpio, int dir, int inv, int func)
+int gpio_direction_input(unsigned gpio)
 {
-	void __iomem *conf = ns9xxx_gpio_get_gconfaddr(gpio);
-	u32 confval;
-	unsigned long flags;
-
-	spin_lock_irqsave(&gpio_lock, flags);
-
-	confval = __raw_readl(conf);
-	REGSETIM_IDX(confval, BBU_GCONFx, DIR, gpio & 7, dir);
-	REGSETIM_IDX(confval, BBU_GCONFx, INV, gpio & 7, inv);
-	REGSETIM_IDX(confval, BBU_GCONFx, FUNC, gpio & 7, func);
-	__raw_writel(confval, conf);
+	if (likely(ns9xxx_valid_gpio(gpio))) {
+		int ret = -EINVAL;
+		unsigned long flags;
 
-	spin_unlock_irqrestore(&gpio_lock, flags);
+		spin_lock_irqsave(&gpio_lock, flags);
+#if defined(CONFIG_PROCESSOR_NS9360)
+		if (processor_is_ns9360())
+			ret = __ns9360_gpio_configure(gpio, 0, 0, 3);
+		else
+#endif
+			BUG();
 
-	return 0;
-}
+		spin_unlock_irqrestore(&gpio_lock, flags);
 
-int ns9xxx_gpio_configure(unsigned gpio, int inv, int func)
-{
-	if (likely(ns9xxx_valid_gpio(gpio))) {
-		if (func == 3) {
-			printk(KERN_WARNING "use gpio_direction_input "
-					"or gpio_direction_output\n");
-			return -EINVAL;
-		} else
-			return __ns9xxx_gpio_configure(gpio, 0, inv, func);
-	} else
-		return -EINVAL;
-}
-EXPORT_SYMBOL(ns9xxx_gpio_configure);
+		return ret;
 
-int gpio_direction_input(unsigned gpio)
-{
-	if (likely(ns9xxx_valid_gpio(gpio))) {
-		return __ns9xxx_gpio_configure(gpio, 0, 0, 3);
 	} else
 		return -EINVAL;
 }
@@ -149,9 +94,22 @@ EXPORT_SYMBOL(gpio_direction_input);
 int gpio_direction_output(unsigned gpio, int value)
 {
 	if (likely(ns9xxx_valid_gpio(gpio))) {
+		int ret = -EINVAL;
+		unsigned long flags;
+
 		gpio_set_value(gpio, value);
 
-		return __ns9xxx_gpio_configure(gpio, 1, 0, 3);
+		spin_lock_irqsave(&gpio_lock, flags);
+#if defined(CONFIG_PROCESSOR_NS9360)
+		if (processor_is_ns9360())
+			ret = __ns9360_gpio_configure(gpio, 1, 0, 3);
+		else
+#endif
+			BUG();
+
+		spin_unlock_irqrestore(&gpio_lock, flags);
+
+		return ret;
 	} else
 		return -EINVAL;
 }
@@ -159,31 +117,28 @@ EXPORT_SYMBOL(gpio_direction_output);
 
 int gpio_get_value(unsigned gpio)
 {
-	void __iomem *stat = ns9xxx_gpio_get_gstataddr(gpio);
-	int ret;
-
-	ret = 1 & (__raw_readl(stat) >> (gpio & 31));
-
-	return ret;
+#if defined(CONFIG_PROCESSOR_NS9360)
+	if (processor_is_ns9360())
+		return ns9360_gpio_get_value(gpio);
+	else
+#endif
+	{
+		BUG();
+		return -EINVAL;
+	}
 }
 EXPORT_SYMBOL(gpio_get_value);
 
 void gpio_set_value(unsigned gpio, int value)
 {
-	void __iomem *ctrl = ns9xxx_gpio_get_gctrladdr(gpio);
-	u32 ctrlval;
 	unsigned long flags;
-
 	spin_lock_irqsave(&gpio_lock, flags);
-
-	ctrlval = __raw_readl(ctrl);
-
-	if (value)
-		ctrlval |= 1 << (gpio & 31);
+#if defined(CONFIG_PROCESSOR_NS9360)
+	if (processor_is_ns9360())
+		ns9360_gpio_set_value(gpio, value);
 	else
-		ctrlval &= ~(1 << (gpio & 31));
-
-	__raw_writel(ctrlval, ctrl);
+#endif
+		BUG();
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index 00001b874e97..36e5835e6097 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -9,21 +9,27 @@
  * the Free Software Foundation.
  */
 #include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch-ns9xxx/regs-sys.h>
+#include <asm/arch-ns9xxx/regs-sys-common.h>
 #include <asm/arch-ns9xxx/irqs.h>
 #include <asm/arch-ns9xxx/board.h>
 
 #include "generic.h"
 
+/* simple interrupt prio table: prio(x) < prio(y) <=> x < y */
+#define irq2prio(i) (i)
+#define prio2irq(p) (p)
+
 static void ns9xxx_mask_irq(unsigned int irq)
 {
 	/* XXX: better use cpp symbols */
-	u32 ic = __raw_readl(SYS_IC(irq / 4));
-	ic &= ~(1 << (7 + 8 * (3 - (irq & 3))));
-	__raw_writel(ic, SYS_IC(irq / 4));
+	int prio = irq2prio(irq);
+	u32 ic = __raw_readl(SYS_IC(prio / 4));
+	ic &= ~(1 << (7 + 8 * (3 - (prio & 3))));
+	__raw_writel(ic, SYS_IC(prio / 4));
 }
 
 static void ns9xxx_ack_irq(unsigned int irq)
@@ -40,9 +46,10 @@ static void ns9xxx_maskack_irq(unsigned int irq)
 static void ns9xxx_unmask_irq(unsigned int irq)
 {
 	/* XXX: better use cpp symbols */
-	u32 ic = __raw_readl(SYS_IC(irq / 4));
-	ic |= 1 << (7 + 8 * (3 - (irq & 3)));
-	__raw_writel(ic, SYS_IC(irq / 4));
+	int prio = irq2prio(irq);
+	u32 ic = __raw_readl(SYS_IC(prio / 4));
+	ic |= 1 << (7 + 8 * (3 - (prio & 3)));
+	__raw_writel(ic, SYS_IC(prio / 4));
 }
 
 static struct irq_chip ns9xxx_chip = {
@@ -52,24 +59,61 @@ static struct irq_chip ns9xxx_chip = {
 	.unmask		= ns9xxx_unmask_irq,
 };
 
+#if 0
+#define handle_irq handle_level_irq
+#else
+void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cpu = smp_processor_id();
+	struct irqaction *action;
+	irqreturn_t action_ret;
+
+	spin_lock(&desc->lock);
+
+	if (unlikely(desc->status & IRQ_INPROGRESS))
+		goto out_unlock;
+
+	desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+	kstat_cpu(cpu).irqs[irq]++;
+
+	action = desc->action;
+	if (unlikely(!action || (desc->status & IRQ_DISABLED)))
+		goto out_unlock;
+
+	desc->status |= IRQ_INPROGRESS;
+	spin_unlock(&desc->lock);
+
+	action_ret = handle_IRQ_event(irq, action);
+
+	spin_lock(&desc->lock);
+	desc->status &= ~IRQ_INPROGRESS;
+	if (!(desc->status & IRQ_DISABLED) && desc->chip->ack)
+		desc->chip->ack(irq);
+
+out_unlock:
+	spin_unlock(&desc->lock);
+}
+#define handle_irq handle_prio_irq
+#endif
+
 void __init ns9xxx_init_irq(void)
 {
 	int i;
 
 	/* disable all IRQs */
 	for (i = 0; i < 8; ++i)
-		__raw_writel((4 * i) << 24 | (4 * i + 1) << 16 |
-				(4 * i + 2) << 8 | (4 * i + 3), SYS_IC(i));
+		__raw_writel(prio2irq(4 * i) << 24 |
+				prio2irq(4 * i + 1) << 16 |
+				prio2irq(4 * i + 2) << 8 |
+				prio2irq(4 * i + 3),
+				SYS_IC(i));
 
-	/* simple interrupt prio table:
-	 * prio(x) < prio(y) <=> x < y
-	 */
 	for (i = 0; i < 32; ++i)
-		__raw_writel(i, SYS_IVA(i));
+		__raw_writel(prio2irq(i), SYS_IVA(i));
 
-	for (i = IRQ_WATCHDOG; i <= IRQ_EXT3; ++i) {
+	for (i = 0; i <= 31; ++i) {
 		set_irq_chip(i, &ns9xxx_chip);
-		set_irq_handler(i, handle_level_irq);
+		set_irq_handler(i, handle_irq);
 		set_irq_flags(i, IRQF_VALID);
 	}
 }
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 760c9d0db7c3..9623fff6b3bc 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -11,12 +11,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch-ns9xxx/processor-ns9360.h>
+
 #include "board-a9m9750dev.h"
 #include "generic.h"
 
 static void __init mach_cc9p9360dev_map_io(void)
 {
-	ns9xxx_map_io();
+	ns9360_map_io();
 	board_a9m9750dev_map_io();
 }
 
@@ -36,6 +38,6 @@ MACHINE_START(CC9P9360DEV, "Digi ConnectCore 9P 9360 on an A9M9750 Devboard")
 	.map_io = mach_cc9p9360dev_map_io,
 	.init_irq = mach_cc9p9360dev_init_irq,
 	.init_machine = mach_cc9p9360dev_init_machine,
-	.timer = &ns9xxx_timer,
+	.timer = &ns9360_timer,
 	.boot_params = 0x100,
 MACHINE_END
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index 85c8b41105c9..fcc815bdd291 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ns9xxx/mach-cc9p9360js.c
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -11,6 +11,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch-ns9xxx/processor-ns9360.h>
+
 #include "board-jscc9p9360.h"
 #include "generic.h"
 
@@ -21,9 +23,9 @@ static void __init mach_cc9p9360js_init_machine(void)
 }
 
 MACHINE_START(CC9P9360JS, "Digi ConnectCore 9P 9360 on an JSCC9P9360 Devboard")
-	.map_io = ns9xxx_map_io,
+	.map_io = ns9360_map_io,
 	.init_irq = ns9xxx_init_irq,
 	.init_machine = mach_cc9p9360js_init_machine,
-	.timer = &ns9xxx_timer,
+	.timer = &ns9360_timer,
 	.boot_params = 0x100,
 MACHINE_END
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
new file mode 100644
index 000000000000..5aa5d9baf8c8
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-ns9xxx/plat-serial8250.c
+ *
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+#include <asm/arch-ns9xxx/board.h>
+
+#define DRIVER_NAME "serial8250"
+
+static int __init ns9xxx_plat_serial8250_init(void)
+{
+	struct plat_serial8250_port *pdata;
+	struct platform_device *pdev;
+	int ret = -ENOMEM;
+	int i;
+
+	if (!board_is_a9m9750dev())
+		return -ENODEV;
+
+	pdev = platform_device_alloc(DRIVER_NAME, 0);
+	if (!pdev)
+		goto err;
+
+	pdata = kzalloc(5 * sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto err;
+
+	pdev->dev.platform_data = pdata;
+
+	pdata[0].iobase = FPGA_UARTA_BASE;
+	pdata[1].iobase = FPGA_UARTB_BASE;
+	pdata[2].iobase = FPGA_UARTC_BASE;
+	pdata[3].iobase = FPGA_UARTD_BASE;
+
+	for (i = 0; i < 4; ++i) {
+		pdata[i].membase = (void __iomem *)pdata[i].iobase;
+		pdata[i].mapbase = pdata[i].iobase;
+		pdata[i].iotype = UPIO_MEM;
+		pdata[i].uartclk = 18432000;
+		pdata[i].flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
+	}
+
+	pdata[0].irq = IRQ_FPGA_UARTA;
+	pdata[1].irq = IRQ_FPGA_UARTB;
+	pdata[2].irq = IRQ_FPGA_UARTC;
+	pdata[3].irq = IRQ_FPGA_UARTD;
+
+	ret = platform_device_add(pdev);
+	if (ret) {
+err:
+		platform_device_put(pdev);
+
+		printk(KERN_WARNING "Could not add %s (errno=%d)\n",
+				DRIVER_NAME, ret);
+	}
+
+	return 0;
+}
+
+arch_initcall(ns9xxx_plat_serial8250_init);
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
new file mode 100644
index 000000000000..2bee0b7fccbb
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ns9xxx/processor-ns9360.c
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <asm/page.h>
+#include <asm/mach/map.h>
+#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
+
+void ns9360_reset(char mode)
+{
+	u32 reg;
+
+	reg = __raw_readl(SYS_PLL) >> 16;
+	REGSET(reg, SYS_PLL, SWC, YES);
+	__raw_writel(reg, SYS_PLL);
+}
+
+#define CRYSTAL 29491200 /* Hz */
+unsigned long ns9360_systemclock(void)
+{
+	u32 pll = __raw_readl(SYS_PLL);
+	return CRYSTAL * (REGGETIM(pll, SYS_PLL, ND) + 1)
+		>> REGGETIM(pll, SYS_PLL, FS);
+}
+
+static struct map_desc ns9360_io_desc[] __initdata = {
+	{ /* BBus */
+		.virtual = io_p2v(0x90000000),
+		.pfn = __phys_to_pfn(0x90000000),
+		.length = 0x00700000,
+		.type = MT_DEVICE,
+	}, { /* AHB */
+		.virtual = io_p2v(0xa0100000),
+		.pfn = __phys_to_pfn(0xa0100000),
+		.length = 0x00900000,
+		.type = MT_DEVICE,
+	},
+};
+
+void __init ns9360_map_io(void)
+{
+	iotable_init(ns9360_io_desc, ARRAY_SIZE(ns9360_io_desc));
+}
diff --git a/arch/arm/mach-ns9xxx/time.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index c3dd1f4acb99..4d573c9793ed 100644
--- a/arch/arm/mach-ns9xxx/time.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -1,7 +1,7 @@
 /*
- * arch/arm/mach-ns9xxx/time.c
+ * arch/arm/mach-ns9xxx/time-ns9360.c
  *
- * Copyright (C) 2006 by Digi International Inc.
+ * Copyright (C) 2006,2007 by Digi International Inc.
  * All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
@@ -15,8 +15,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch-ns9xxx/regs-sys.h>
-#include <asm/arch-ns9xxx/clock.h>
+#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
 #include <asm/arch-ns9xxx/irqs.h>
 #include <asm/arch/system.h>
 #include "generic.h"
@@ -25,26 +25,26 @@
 #define TIMER_CLOCKEVENT 1
 static u32 latch;
 
-static cycle_t ns9xxx_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(void)
 {
 	return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
 }
 
-static struct clocksource ns9xxx_clocksource = {
-	.name	= "ns9xxx-timer" __stringify(TIMER_CLOCKSOURCE),
+static struct clocksource ns9360_clocksource = {
+	.name	= "ns9360-timer" __stringify(TIMER_CLOCKSOURCE),
 	.rating	= 300,
-	.read	= ns9xxx_clocksource_read,
+	.read	= ns9360_clocksource_read,
 	.mask	= CLOCKSOURCE_MASK(32),
 	.shift	= 20,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void ns9xxx_clockevent_setmode(enum clock_event_mode mode,
+static void ns9360_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
 {
 	u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
 
-	switch(mode) {
+	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		__raw_writel(latch, SYS_TRC(TIMER_CLOCKEVENT));
 		REGSET(tc, SYS_TCx, REN, EN);
@@ -69,7 +69,7 @@ static void ns9xxx_clockevent_setmode(enum clock_event_mode mode,
 	__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
 }
 
-static int ns9xxx_clockevent_setnextevent(unsigned long evt,
+static int ns9360_clockevent_setnextevent(unsigned long evt,
 		struct clock_event_device *clk)
 {
 	u32 tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
@@ -88,20 +88,20 @@ static int ns9xxx_clockevent_setnextevent(unsigned long evt,
 	return 0;
 }
 
-static struct clock_event_device ns9xxx_clockevent_device = {
-	.name		= "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT),
+static struct clock_event_device ns9360_clockevent_device = {
+	.name		= "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
 	.shift		= 20,
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= ns9xxx_clockevent_setmode,
-	.set_next_event	= ns9xxx_clockevent_setnextevent,
+	.set_mode	= ns9360_clockevent_setmode,
+	.set_next_event	= ns9360_clockevent_setnextevent,
 };
 
-static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id)
+static irqreturn_t ns9360_clockevent_handler(int irq, void *dev_id)
 {
-	int timerno = irq - IRQ_TIMER0;
+	int timerno = irq - IRQ_NS9360_TIMER0;
 	u32 tc;
 
-	struct clock_event_device *evt = &ns9xxx_clockevent_device;
+	struct clock_event_device *evt = &ns9360_clockevent_device;
 
 	/* clear irq */
 	tc = __raw_readl(SYS_TC(timerno));
@@ -119,13 +119,13 @@ static irqreturn_t ns9xxx_clockevent_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction ns9xxx_clockevent_action = {
-	.name		= "ns9xxx-timer" __stringify(TIMER_CLOCKEVENT),
+static struct irqaction ns9360_clockevent_action = {
+	.name		= "ns9360-timer" __stringify(TIMER_CLOCKEVENT),
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ns9xxx_clockevent_handler,
+	.handler	= ns9360_clockevent_handler,
 };
 
-static void __init ns9xxx_timer_init(void)
+static void __init ns9360_timer_init(void)
 {
 	int tc;
 
@@ -148,12 +148,12 @@ static void __init ns9xxx_timer_init(void)
 
 	__raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE));
 
-	ns9xxx_clocksource.mult = clocksource_hz2mult(ns9xxx_cpuclock(),
-			ns9xxx_clocksource.shift);
+	ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(),
+			ns9360_clocksource.shift);
 
-	clocksource_register(&ns9xxx_clocksource);
+	clocksource_register(&ns9360_clocksource);
 
-	latch = SH_DIV(ns9xxx_cpuclock(), HZ, 0);
+	latch = SH_DIV(ns9360_cpuclock(), HZ, 0);
 
 	tc = __raw_readl(SYS_TC(TIMER_CLOCKEVENT));
 	REGSET(tc, SYS_TCx, TEN, DIS);
@@ -166,19 +166,20 @@ static void __init ns9xxx_timer_init(void)
 	REGSET(tc, SYS_TCx, REN, EN);
 	__raw_writel(tc, SYS_TC(TIMER_CLOCKEVENT));
 
-	ns9xxx_clockevent_device.mult = div_sc(ns9xxx_cpuclock(),
-			NSEC_PER_SEC, ns9xxx_clockevent_device.shift);
-	ns9xxx_clockevent_device.max_delta_ns =
-		clockevent_delta2ns(-1, &ns9xxx_clockevent_device);
-	ns9xxx_clockevent_device.min_delta_ns =
-		clockevent_delta2ns(1, &ns9xxx_clockevent_device);
+	ns9360_clockevent_device.mult = div_sc(ns9360_cpuclock(),
+			NSEC_PER_SEC, ns9360_clockevent_device.shift);
+	ns9360_clockevent_device.max_delta_ns =
+		clockevent_delta2ns(-1, &ns9360_clockevent_device);
+	ns9360_clockevent_device.min_delta_ns =
+		clockevent_delta2ns(1, &ns9360_clockevent_device);
 
-	ns9xxx_clockevent_device.cpumask = cpumask_of_cpu(0);
-	clockevents_register_device(&ns9xxx_clockevent_device);
+	ns9360_clockevent_device.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&ns9360_clockevent_device);
 
-	setup_irq(IRQ_TIMER0 + TIMER_CLOCKEVENT, &ns9xxx_clockevent_action);
+	setup_irq(IRQ_NS9360_TIMER0 + TIMER_CLOCKEVENT,
+			&ns9360_clockevent_action);
 }
 
-struct sys_timer ns9xxx_timer = {
-	.init = ns9xxx_timer_init,
+struct sys_timer ns9360_timer = {
+	.init = ns9360_timer_init,
 };
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 015a66b3ca8e..c06f5254c0f3 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -5,7 +5,8 @@
 # Common support
 obj-y := io.o id.o clock.o irq.o mux.o serial.o devices.o
 
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= time.o
+obj-$(CONFIG_OMAP_MPU_TIMER)	+= time.o
+obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 070345ee39a5..507987720015 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -350,6 +350,10 @@ static void __init h2_init_smc91x(void)
 
 static struct i2c_board_info __initdata h2_i2c_board_info[] = {
 	{
+		I2C_BOARD_INFO("tps65010", 0x48),
+		.type           = "tps65010",
+		.irq            = OMAP_GPIO_IRQ(58),
+	}, {
 		I2C_BOARD_INFO("isp1301_omap", 0x2d),
 		.type		= "isp1301_omap",
 		.irq		= OMAP_GPIO_IRQ(2),
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 6fc516855a8c..c3ef1ee5f77b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
 
 #include <asm/setup.h>
@@ -51,6 +52,8 @@
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
+#define H3_TS_GPIO	48
+
 static int h3_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -373,6 +376,17 @@ static struct platform_device h3_lcd_device = {
 	.id		= -1,
 };
 
+static struct spi_board_info h3_spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "tsc2101",
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.irq		= OMAP_GPIO_IRQ(H3_TS_GPIO),
+		.max_speed_hz	= 16000000,
+		/* .platform_data	= &tsc_platform_data, */
+	},
+};
+
 static struct omap_mcbsp_reg_cfg mcbsp_regs = {
 	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
 	.spcr1 = RINTM(3) | RRST,
@@ -457,6 +471,14 @@ static struct omap_board_config_kernel h3_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h3_lcd_config },
 };
 
+static struct i2c_board_info __initdata h3_i2c_board_info[] = {
+       {
+               I2C_BOARD_INFO("tps65010", 0x48),
+               .type           = "tps65013",
+               /* .irq         = OMAP_GPIO_IRQ(??), */
+       },
+};
+
 static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
 	{
 		.name			= "mmc_slot",
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 5279e35a8aec..4f9baba7d893 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
+#include <linux/leds.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -183,11 +184,80 @@ static struct platform_device *osk5912_devices[] __initdata = {
 	&osk5912_mcbsp1_device,
 };
 
+static struct gpio_led tps_leds[] = {
+	/* NOTE:  D9 and D2 have hardware blink support.
+	 * Also, D9 requires non-battery power.
+	 */
+	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", },
+	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
+	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
+			.default_trigger = "heartbeat", },
+};
+
+static struct gpio_led_platform_data tps_leds_data = {
+	.num_leds	= 3,
+	.leds		= tps_leds,
+};
+
+static struct platform_device osk5912_tps_leds = {
+	.name			= "leds-gpio",
+	.id			= 0,
+	.dev.platform_data	= &tps_leds_data,
+};
+
+static int osk_tps_setup(struct i2c_client *client, void *context)
+{
+	/* Set GPIO 1 HIGH to disable VBUS power supply;
+	 * OHCI driver powers it up/down as needed.
+	 */
+	gpio_request(OSK_TPS_GPIO_USB_PWR_EN, "n_vbus_en");
+	gpio_direction_output(OSK_TPS_GPIO_USB_PWR_EN, 1);
+
+	/* Set GPIO 2 high so LED D3 is off by default */
+	tps65010_set_gpio_out_value(GPIO2, HIGH);
+
+	/* Set GPIO 3 low to take ethernet out of reset */
+	gpio_request(OSK_TPS_GPIO_LAN_RESET, "smc_reset");
+	gpio_direction_output(OSK_TPS_GPIO_LAN_RESET, 0);
+
+	/* GPIO4 is VDD_DSP */
+	gpio_request(OSK_TPS_GPIO_DSP_PWR_EN, "dsp_power");
+	gpio_direction_output(OSK_TPS_GPIO_DSP_PWR_EN, 1);
+	/* REVISIT if DSP support isn't configured, power it off ... */
+
+	/* Let LED1 (D9) blink; leds-gpio may override it */
+	tps65010_set_led(LED1, BLINK);
+
+	/* Set LED2 off by default */
+	tps65010_set_led(LED2, OFF);
+
+	/* Enable LOW_PWR handshake */
+	tps65010_set_low_pwr(ON);
+
+	/* Switch VLDO2 to 3.0V for AIC23 */
+	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
+			| TPS_LDO1_ENABLE);
+
+	/* register these three LEDs */
+	osk5912_tps_leds.dev.parent = &client->dev;
+	platform_device_register(&osk5912_tps_leds);
+
+	return 0;
+}
+
+static struct tps65010_board tps_board = {
+	.base		= OSK_TPS_GPIO_BASE,
+	.outmask	= 0x0f,
+	.setup		= osk_tps_setup,
+};
+
 static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("tps65010", 0x48),
 		.type		= "tps65010",
 		.irq		= OMAP_GPIO_IRQ(OMAP_MPUIO(1)),
+		.platform_data	= &tps_board,
+
 	},
 	/* TODO when driver support is ready:
 	 *  - aic23 audio chip at 0x1a
@@ -198,7 +268,7 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = {
 
 static void __init osk_init_smc91x(void)
 {
-	if ((omap_request_gpio(0)) < 0) {
+	if ((gpio_request(0, "smc_irq")) < 0) {
 		printk("Error requesting gpio 0 for smc91x irq\n");
 		return;
 	}
@@ -210,7 +280,7 @@ static void __init osk_init_smc91x(void)
 static void __init osk_init_cf(void)
 {
 	omap_cfg_reg(M7_1610_GPIO62);
-	if ((omap_request_gpio(62)) < 0) {
+	if ((gpio_request(62, "cf_irq")) < 0) {
 		printk("Error requesting gpio 62 for CF irq\n");
 		return;
 	}
@@ -334,7 +404,7 @@ static struct platform_device *mistral_devices[] __initdata = {
 
 static int mistral_get_pendown_state(void)
 {
-	return !omap_get_gpio_datain(4);
+	return !gpio_get_value(4);
 }
 
 static const struct ads7846_platform_data mistral_ts_info = {
@@ -396,25 +466,31 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(W14_1610_CCP_DATAP);
 
 	/* CAM_PWDN */
-	if (omap_request_gpio(11) == 0) {
+	if (gpio_request(11, "cam_pwdn") == 0) {
 		omap_cfg_reg(N20_1610_GPIO11);
-		omap_set_gpio_direction(11, 0 /* out */);
-		omap_set_gpio_dataout(11, 0 /* off */);
+		gpio_direction_output(11, 0);
 	} else
 		pr_debug("OSK+Mistral: CAM_PWDN is awol\n");
 
 
 	/* omap_cfg_reg(P19_1610_GPIO6); */	/* BUSY */
+	gpio_request(6, "ts_busy");
+	gpio_direction_input(6);
+
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
+	gpio_request(4, "ts_int");
+	gpio_direction_input(4);
 	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
 
 	/* the sideways button (SW1) is for use as a "wakeup" button */
 	omap_cfg_reg(N15_1610_MPUIO2);
-	if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
+	if (gpio_request(OMAP_MPUIO(2), "wakeup") == 0) {
 		int ret = 0;
-		omap_set_gpio_direction(OMAP_MPUIO(2), 1);
+
+		gpio_direction_input(OMAP_MPUIO(2));
 		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
@@ -425,7 +501,7 @@ static void __init osk_mistral_init(void)
 				IRQF_SHARED, "mistral_wakeup",
 				&osk_mistral_wake_interrupt);
 		if (ret != 0) {
-			omap_free_gpio(OMAP_MPUIO(2));
+			gpio_free(OMAP_MPUIO(2));
 			printk(KERN_ERR "OSK+Mistral: no wakeup irq, %d?\n",
 				ret);
 		} else
@@ -438,10 +514,8 @@ static void __init osk_mistral_init(void)
 	 * board, like the touchscreen, EEPROM, and wakeup (!) switch.
 	 */
 	omap_cfg_reg(PWL);
-	if (omap_request_gpio(2) == 0) {
-		omap_set_gpio_direction(2, 0 /* out */);
-		omap_set_gpio_dataout(2, 1 /* on */);
-	}
+	if (gpio_request(2, "lcd_pwr") == 0)
+		gpio_direction_output(2, 1);
 
 	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
@@ -484,44 +558,6 @@ static void __init osk_map_io(void)
 	omap1_map_common_io();
 }
 
-#ifdef CONFIG_TPS65010
-static int __init osk_tps_init(void)
-{
-	if (!machine_is_omap_osk())
-		return 0;
-
-	/* Let LED1 (D9) blink */
-	tps65010_set_led(LED1, BLINK);
-
-	/* Disable LED 2 (D2) */
-	tps65010_set_led(LED2, OFF);
-
-	/* Set GPIO 1 HIGH to disable VBUS power supply;
-	 * OHCI driver powers it up/down as needed.
-	 */
-	tps65010_set_gpio_out_value(GPIO1, HIGH);
-
-	/* Set GPIO 2 low to turn on LED D3 */
-	tps65010_set_gpio_out_value(GPIO2, HIGH);
-
-	/* Set GPIO 3 low to take ethernet out of reset */
-	tps65010_set_gpio_out_value(GPIO3, LOW);
-
-	/* gpio4 for VDD_DSP */
-	/* FIXME send power to DSP iff it's configured */
-
-	/* Enable LOW_PWR */
-	tps65010_set_low_pwr(ON);
-
-	/* Switch VLDO2 to 3.0V for AIC23 */
-	tps65010_config_vregs1(TPS_LDO2_ENABLE | TPS_VLDO2_3_0V
-			| TPS_LDO1_ENABLE);
-
-	return 0;
-}
-fs_initcall(osk_tps_init);
-#endif
-
 MACHINE_START(OMAP_OSK, "TI-OSK")
 	/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
 	.phys_io	= 0xfff00000,
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 026685ed461a..754383dde807 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -1,11 +1,9 @@
 /*
  * linux/arch/arm/mach-omap1/leds-osk.c
  *
- * LED driver for OSK, and optionally Mistral QVGA, boards
+ * LED driver for OSK with optional Mistral QVGA board
  */
 #include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/i2c/tps65010.h>
 
 #include <asm/hardware.h>
 #include <asm/leds.h>
@@ -20,49 +18,11 @@
 #define LED_STATE_CLAIMED	(1 << 1)
 static u8 led_state;
 
-#define	GREEN_LED		(1 << 0)	/* TPS65010 LED1 */
-#define	AMBER_LED		(1 << 1)	/* TPS65010 LED2 */
-#define	RED_LED			(1 << 2)	/* TPS65010 GPIO2 */
 #define	TIMER_LED		(1 << 3)	/* Mistral board */
 #define	IDLE_LED		(1 << 4)	/* Mistral board */
 static u8 hw_led_state;
 
 
-/* TPS65010 leds are changed using i2c -- from a task context.
- * Using one of these for the "idle" LED would be impractical...
- */
-#define	TPS_LEDS	(GREEN_LED | RED_LED | AMBER_LED)
-
-static u8 tps_leds_change;
-
-static void tps_work(struct work_struct *unused)
-{
-	for (;;) {
-		u8	leds;
-
-		local_irq_disable();
-		leds = tps_leds_change;
-		tps_leds_change = 0;
-		local_irq_enable();
-
-		if (!leds)
-			break;
-
-		/* careful:  the set_led() value is on/off/blink */
-		if (leds & GREEN_LED)
-			tps65010_set_led(LED1, !!(hw_led_state & GREEN_LED));
-		if (leds & AMBER_LED)
-			tps65010_set_led(LED2, !!(hw_led_state & AMBER_LED));
-
-		/* the gpio led doesn't have that issue */
-		if (leds & RED_LED)
-			tps65010_set_gpio_out_value(GPIO2,
-					!(hw_led_state & RED_LED));
-	}
-}
-
-static DECLARE_WORK(work, tps_work);
-
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
 /* For now, all system indicators require the Mistral board, since that
@@ -112,7 +72,6 @@ void osk_leds_event(led_event_t evt)
 	case led_stop:
 		led_state &= ~LED_STATE_ENABLED;
 		hw_led_state = 0;
-		/* NOTE:  work may still be pending!! */
 		break;
 
 	case led_claim:
@@ -145,48 +104,11 @@ void osk_leds_event(led_event_t evt)
 
 #endif	/* CONFIG_OMAP_OSK_MISTRAL */
 
-	/* "green" == tps LED1 (leftmost, normally power-good)
-	 * works only with DC adapter, not on battery power!
-	 */
-	case led_green_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= GREEN_LED;
-		break;
-	case led_green_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~GREEN_LED;
-		break;
-
-	/* "amber" == tps LED2 (middle) */
-	case led_amber_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= AMBER_LED;
-		break;
-	case led_amber_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~AMBER_LED;
-		break;
-
-	/* "red" == LED on tps gpio3 (rightmost) */
-	case led_red_on:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state |= RED_LED;
-		break;
-	case led_red_off:
-		if (led_state & LED_STATE_CLAIMED)
-			hw_led_state &= ~RED_LED;
-		break;
-
 	default:
 		break;
 	}
 
 	leds ^= hw_led_state;
-	leds &= TPS_LEDS;
-	if (leds && (led_state & LED_STATE_CLAIMED)) {
-		tps_leds_change |= leds;
-		schedule_work(&work);
-	}
 
 done:
 	local_irq_restore(flags);
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 52c70e5fcf65..e207bf7cb853 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -3,9 +3,9 @@
  *
  * OMAP1 pin multiplexing configurations
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,8 +32,10 @@
 
 #ifdef CONFIG_OMAP_MUX
 
+static struct omap_mux_cfg arch_mux_cfg;
+
 #ifdef CONFIG_ARCH_OMAP730
-struct pin_config __initdata_or_module omap730_pins[] = {
+static struct pin_config __initdata_or_module omap730_pins[] = {
 MUX_CFG_730("E2_730_KBR0",        12,   21,    0,   20,   1, 0)
 MUX_CFG_730("J7_730_KBR1",        12,   25,    0,   24,   1, 0)
 MUX_CFG_730("E1_730_KBR2",        12,   29,    0,   28,   1, 0)
@@ -49,10 +51,14 @@ MUX_CFG_730("AA17_730_USB_DM",     2,   21,    0,   20,   0, 0)
 MUX_CFG_730("W16_730_USB_PU_EN",   2,   25,    0,   24,   0, 0)
 MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
 };
-#endif
+#define OMAP730_PINS_SZ		ARRAY_SIZE(omap730_pins)
+#else
+#define omap730_pins		NULL
+#define OMAP730_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-struct pin_config __initdata_or_module omap1xxx_pins[] = {
+static struct pin_config __initdata_or_module omap1xxx_pins[] = {
 /*
  *	 description		mux  mode   mux	 pull pull  pull  pu_pd	 pu  dbg
  *				reg  offset mode reg  bit   ena	  reg
@@ -306,22 +312,136 @@ MUX_CFG("Y12_1610_CCP_CLKP",	 8,   18,    6,   1,  24,   1,    1,     0,  0)
 MUX_CFG("W13_1610_CCP_CLKM",	 9,    0,    6,   1,  28,   1,    1,     0,  0)
 MUX_CFG("W14_1610_CCP_DATAP",	 9,   24,    6,   2,   4,   1,    2,     0,  0)
 MUX_CFG("Y14_1610_CCP_DATAM",	 9,   21,    6,   2,   3,   1,    2,     0,  0)
-
 };
+#define OMAP1XXX_PINS_SZ	ARRAY_SIZE(omap1xxx_pins)
+#else
+#define omap1xxx_pins		NULL
+#define OMAP1XXX_PINS_SZ	0
 #endif	/* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */
 
-int __init omap1_mux_init(void)
+int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 {
-
-#ifdef CONFIG_ARCH_OMAP730
-	omap_mux_register(omap730_pins, ARRAY_SIZE(omap730_pins));
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
+		pull_orig = 0, pull = 0;
+	unsigned int mask, warn = 0;
+
+	/* Check the mux register in question */
+	if (cfg->mux_reg) {
+		unsigned	tmp1, tmp2;
+
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		reg_orig = omap_readl(cfg->mux_reg);
+
+		/* The mux registers always seem to be 3 bits long */
+		mask = (0x7 << cfg->mask_offset);
+		tmp1 = reg_orig & mask;
+		reg = reg_orig & ~mask;
+
+		tmp2 = (cfg->mask << cfg->mask_offset);
+		reg |= tmp2;
+
+		if (tmp1 != tmp2)
+			warn = 1;
+
+		omap_writel(reg, cfg->mux_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	/* Check for pull up or pull down selection on 1610 */
+	if (!cpu_is_omap15xx()) {
+		if (cfg->pu_pd_reg && cfg->pull_val) {
+			spin_lock_irqsave(&mux_spin_lock, flags);
+			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
+			mask = 1 << cfg->pull_bit;
+
+			if (cfg->pu_pd_val) {
+				if (!(pu_pd_orig & mask))
+					warn = 1;
+				/* Use pull up */
+				pu_pd = pu_pd_orig | mask;
+			} else {
+				if (pu_pd_orig & mask)
+					warn = 1;
+				/* Use pull down */
+				pu_pd = pu_pd_orig & ~mask;
+			}
+			omap_writel(pu_pd, cfg->pu_pd_reg);
+			spin_unlock_irqrestore(&mux_spin_lock, flags);
+		}
+	}
+
+	/* Check for an associated pull down register */
+	if (cfg->pull_reg) {
+		spin_lock_irqsave(&mux_spin_lock, flags);
+		pull_orig = omap_readl(cfg->pull_reg);
+		mask = 1 << cfg->pull_bit;
+
+		if (cfg->pull_val) {
+			if (pull_orig & mask)
+				warn = 1;
+			/* Low bit = pull enabled */
+			pull = pull_orig & ~mask;
+		} else {
+			if (!(pull_orig & mask))
+				warn = 1;
+			/* High bit = pull disabled */
+			pull = pull_orig | mask;
+		}
+
+		omap_writel(pull, cfg->pull_reg);
+		spin_unlock_irqrestore(&mux_spin_lock, flags);
+	}
+
+	if (warn) {
+#ifdef CONFIG_OMAP_MUX_WARNINGS
+		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
 #endif
-
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
-	omap_mux_register(omap1xxx_pins, ARRAY_SIZE(omap1xxx_pins));
+	}
+
+#ifdef CONFIG_OMAP_MUX_DEBUG
+	if (cfg->debug || warn) {
+		printk("MUX: Setting register %s\n", cfg->name);
+		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+
+		if (!cpu_is_omap15xx()) {
+			if (cfg->pu_pd_reg && cfg->pull_val) {
+				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+				       cfg->pu_pd_name, cfg->pu_pd_reg,
+				       pu_pd_orig, pu_pd);
+			}
+		}
+
+		if (cfg->pull_reg)
+			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
+			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
+	}
 #endif
 
+#ifdef CONFIG_OMAP_MUX_ERRORS
+	return warn ? -ETXTBSY : 0;
+#else
 	return 0;
+#endif
+}
+
+int __init omap1_mux_init(void)
+{
+	if (cpu_is_omap730()) {
+		arch_mux_cfg.pins	= omap730_pins;
+		arch_mux_cfg.size	= OMAP730_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
+
+	if (cpu_is_omap15xx() || cpu_is_omap16xx()) {
+		arch_mux_cfg.pins	= omap1xxx_pins;
+		arch_mux_cfg.size	= OMAP1XXX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
+	}
+
+	return omap_mux_register(&arch_mux_cfg);
 }
 
 #endif
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 8eb5dcdaead2..e6c64e10b7ec 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -717,7 +717,7 @@ static int __init omap_pm_init(void)
 #endif
 
 #ifdef CONFIG_OMAP_32K_TIMER
-	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr);
+	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 	if (error)
 		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
 #endif
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 237651ebae5d..5d2b270935a2 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -56,37 +56,6 @@
 #define OMAP_MPU_TIMER_BASE		OMAP_MPU_TIMER1_BASE
 #define OMAP_MPU_TIMER_OFFSET		0x100
 
-/* cycles to nsec conversions taken from arch/i386/kernel/timers/timer_tsc.c,
- * converted to use kHz by Kevin Hilman */
-/* convert from cycles(64bits) => nanoseconds (64bits)
- *  basic equation:
- *		ns = cycles / (freq / ns_per_sec)
- *		ns = cycles * (ns_per_sec / freq)
- *		ns = cycles * (10^9 / (cpu_khz * 10^3))
- *		ns = cycles * (10^6 / cpu_khz)
- *
- *	Then we use scaling math (suggested by george at mvista.com) to get:
- *		ns = cycles * (10^6 * SC / cpu_khz / SC
- *		ns = cycles * cyc2ns_scale / SC
- *
- *	And since SC is a constant power of two, we can convert the div
- *  into a shift.
- *			-johnstul at us.ibm.com "math is hard, lets go shopping!"
- */
-static unsigned long cyc2ns_scale;
-#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
-
-static inline void set_cyc2ns_scale(unsigned long cpu_khz)
-{
-	cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
-}
-
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
-}
-
-
 typedef struct {
 	u32 cntl;			/* CNTL_TIMER, R/W */
 	u32 load_tim;			/* LOAD_TIM,   W */
@@ -132,13 +101,20 @@ static inline void omap_mpu_timer_start(int nr, unsigned long load_val,
 	timer->cntl = timerflags;
 }
 
+static inline void omap_mpu_timer_stop(int nr)
+{
+	volatile omap_mpu_timer_regs_t* timer = omap_mpu_timer_base(nr);
+
+	timer->cntl &= ~MPU_TIMER_ST;
+}
+
 /*
  * ---------------------------------------------------------------------------
  * MPU timer 1 ... count down to zero, interrupt, reload
  * ---------------------------------------------------------------------------
  */
 static int omap_mpu_set_next_event(unsigned long cycles,
-				    struct clock_event_device *evt)
+				   struct clock_event_device *evt)
 {
 	omap_mpu_timer_start(0, cycles, 0);
 	return 0;
@@ -152,6 +128,7 @@ static void omap_mpu_set_mode(enum clock_event_mode mode,
 		omap_mpu_set_autoreset(0);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
+		omap_mpu_timer_stop(0);
 		omap_mpu_remove_autoreset(0);
 		break;
 	case CLOCK_EVT_MODE_UNUSED:
@@ -163,7 +140,7 @@ static void omap_mpu_set_mode(enum clock_event_mode mode,
 
 static struct clock_event_device clockevent_mpu_timer1 = {
 	.name		= "mpu_timer1",
-	.features       = CLOCK_EVT_FEAT_PERIODIC, CLOCK_EVT_FEAT_ONESHOT,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
 	.set_next_event	= omap_mpu_set_next_event,
 	.set_mode	= omap_mpu_set_mode,
@@ -186,8 +163,6 @@ static struct irqaction omap_mpu_timer1_irq = {
 
 static __init void omap_init_mpu_timer(unsigned long rate)
 {
-	set_cyc2ns_scale(rate / 1000);
-
 	setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
 	omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
@@ -252,22 +227,6 @@ static void __init omap_init_clocksource(unsigned long rate)
 		printk(err, clocksource_mpu.name);
 }
 
-
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	unsigned long ticks = 0 - omap_mpu_timer_read(1);
-	unsigned long long ticks64;
-
-	ticks64 = omap_mpu_timer2_overflows;
-	ticks64 <<= 32;
-	ticks64 |= ticks;
-
-	return cycles_2_ns(ticks64);
-}
-
 /*
  * ---------------------------------------------------------------------------
  * Timer initialization
diff --git a/arch/arm/plat-omap/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index ea76f1979a3d..fbbdb806c95a 100644
--- a/arch/arm/plat-omap/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/plat-omap/timer32k.c
+ * linux/arch/arm/mach-omap1/timer32k.c
  *
  * OMAP 32K Timer
  *
@@ -70,8 +70,6 @@ struct sys_timer omap_timer;
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP24XX_32KSYNCT_BASE + 0x10)
 #else
 #error OMAP 32KHz timer does not currently work on 15XX!
 #endif
@@ -93,8 +91,6 @@ struct sys_timer omap_timer;
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
 				(((nr_jiffies) * (clock_rate)) / HZ)
 
-#if defined(CONFIG_ARCH_OMAP1)
-
 static inline void omap_32k_timer_write(int val, int reg)
 {
 	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
@@ -120,30 +116,14 @@ static inline void omap_32k_timer_stop(void)
 
 #define omap_32k_timer_ack_irq()
 
-#elif defined(CONFIG_ARCH_OMAP2)
-
-static struct omap_dm_timer *gptimer;
-
-static inline void omap_32k_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
-
-static inline void omap_32k_timer_stop(void)
+static int omap_32k_timer_set_next_event(unsigned long delta,
+					 struct clock_event_device *dev)
 {
-	omap_dm_timer_stop(gptimer);
-}
+	omap_32k_timer_start(delta);
 
-static inline void omap_32k_timer_ack_irq(void)
-{
-	u32 status = omap_dm_timer_read_status(gptimer);
-	omap_dm_timer_write_status(gptimer, status);
+	return 0;
 }
 
-#endif
-
 static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 				    struct clock_event_device *evt)
 {
@@ -164,8 +144,9 @@ static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 
 static struct clock_event_device clockevent_32k_timer = {
 	.name		= "32k-timer",
-	.features       = CLOCK_EVT_FEAT_PERIODIC,
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.shift		= 32,
+	.set_next_event	= omap_32k_timer_set_next_event,
 	.set_mode	= omap_32k_timer_set_mode,
 };
 
@@ -178,32 +159,6 @@ static inline unsigned long omap_32k_sync_timer_read(void)
 	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
 
-/*
- * Rounds down to nearest usec. Note that this will overflow for larger values.
- */
-static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
-{
-	return (ticks_32k * 5*5*5*5*5*5) >> 9;
-}
-
-/*
- * Rounds down to nearest nsec.
- */
-static inline unsigned long long
-omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
-{
-	return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
-}
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
-	return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
-}
-
 static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evt = &clockevent_32k_timer;
@@ -222,22 +177,7 @@ static struct irqaction omap_32k_timer_irq = {
 
 static __init void omap_init_32k_timer(void)
 {
-	if (cpu_class_is_omap1())
-		setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-
-#ifdef CONFIG_ARCH_OMAP2
-	/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
-	if (cpu_is_omap24xx()) {
-		gptimer = omap_dm_timer_request_specific(1);
-		BUG_ON(gptimer == NULL);
-
-		omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
-		setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
-		omap_dm_timer_set_int_enable(gptimer,
-			OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
-			OMAP_TIMER_INT_MATCH);
-	}
-#endif
+	setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 
 	clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
 					   NSEC_PER_SEC,
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index b05b738d31e6..2feb6870b735 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,13 +3,15 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
-	 serial.o gpmc.o
-
-obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o control.o prcm.o clock.o mux.o \
+		devices.o serial.o gpmc.o timer-gp.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o
+
+# Clock framework
+obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 64235dee5614..1c12d7c6c7fc 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -33,7 +33,6 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 #include <asm/arch/gpmc.h>
-#include "prcm-regs.h"
 
 #include <asm/io.h>
 
@@ -125,15 +124,18 @@ static inline void __init sdp2430_init_smc91x(void)
 	int eth_cs;
 	unsigned long cs_mem_base;
 	unsigned int rate;
-	struct clk *l3ck;
+	struct clk *gpmc_fck;
 
 	eth_cs = SDP2430_SMC91X_CS;
 
-	l3ck = clk_get(NULL, "core_l3_ck");
-	if (IS_ERR(l3ck))
-		rate = 100000000;
-	else
-		rate = clk_get_rate(l3ck);
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
 
 	/* Make sure CS1 timings are correct, for 2430 always muxed */
 	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
@@ -160,7 +162,7 @@ static inline void __init sdp2430_init_smc91x(void)
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
+		goto out;
 	}
 
 	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
@@ -171,10 +173,13 @@ static inline void __init sdp2430_init_smc91x(void)
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			OMAP24XX_ETHR_GPIO_IRQ);
 		gpmc_cs_free(eth_cs);
-		return;
+		goto out;
 	}
 	omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
 
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
 }
 
 static void __init omap_2430sdp_init_irq(void)
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7846551f0575..a1e1e6765b5b 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,6 +26,8 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -39,7 +41,7 @@
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
 #include <asm/arch/gpmc.h>
-#include "prcm-regs.h"
+#include <asm/arch/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -187,17 +189,47 @@ static inline void __init apollon_init_smc91x(void)
 {
 	unsigned long base;
 
+	unsigned int rate;
+	struct clk *gpmc_fck;
+	int eth_cs;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+
+	eth_cs = APOLLON_ETH_CS;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011203;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
 
 	if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC CS for smc91x\n");
-		return;
+		goto out;
 	}
 	apollon_smc91x_resources[0].start = base + 0x300;
 	apollon_smc91x_resources[0].end   = base + 0x30f;
@@ -208,9 +240,13 @@ static inline void __init apollon_init_smc91x(void)
 		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
 			APOLLON_ETHR_GPIO_IRQ);
 		gpmc_cs_free(APOLLON_ETH_CS);
-		return;
+		goto out;
 	}
 	omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
 }
 
 static void __init omap_apollon_init_irq(void)
@@ -330,6 +366,8 @@ static void __init apollon_usb_init(void)
 
 static void __init omap_apollon_init(void)
 {
+	u32 v;
+
 	apollon_led_init();
 	apollon_sw_init();
 	apollon_flash_init();
@@ -339,7 +377,9 @@ static void __init omap_apollon_init(void)
 	omap_cfg_reg(W19_24XX_SYS_NIRQ);
 
 	/* Use Interal loop-back in MMC/SDIO Module Input Clock selection */
-	CONTROL_DEVCONF |= (1 << 24);
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	v |= (1 << 24);
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
 
 	/*
  	 * Make sure the serial ports are muxed on at this point.
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index f125f432cc3e..d1915f99a5fa 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -19,6 +19,8 @@
 #include <linux/delay.h>
 #include <linux/workqueue.h>
 #include <linux/input.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -26,6 +28,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/gpioexpander.h>
 #include <asm/arch/mux.h>
@@ -36,10 +39,13 @@
 #include <asm/arch/keypad.h>
 #include <asm/arch/menelaus.h>
 #include <asm/arch/dma.h>
-#include "prcm-regs.h"
+#include <asm/arch/gpmc.h>
 
 #include <asm/io.h>
 
+#define H4_FLASH_CS	0
+#define H4_SMC91X_CS	1
+
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
 
@@ -116,8 +122,6 @@ static struct flash_platform_data h4_flash_data = {
 };
 
 static struct resource h4_flash_resource = {
-	.start		= H4_CS0_BASE,
-	.end		= H4_CS0_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -253,21 +257,107 @@ static struct platform_device *h4_devices[] __initdata = {
 	&h4_lcd_device,
 };
 
+/* 2420 Sysboot setup (2430 is different) */
+static u32 get_sysboot_value(void)
+{
+	return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
+		(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
+		 OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
+		 OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
+}
+
+/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
+ *
+ * Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
+ *  correctly.  The macro needs to look at production_id not just hawkeye.
+ */
+static u32 is_gpmc_muxed(void)
+{
+	u32 mux;
+	mux = get_sysboot_value();
+	if ((mux & 0xF) == 0xd)
+		return 1;	/* NAND config (could be either) */
+	if (mux & 0x2)		/* if mux'ed */
+		return 1;
+	else
+		return 0;
+}
+
 static inline void __init h4_init_debug(void)
 {
+	int eth_cs;
+	unsigned long cs_mem_base;
+	unsigned int muxed, rate;
+	struct clk *gpmc_fck;
+
+	eth_cs	= H4_SMC91X_CS;
+
+	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck)) {
+		WARN_ON(1);
+		return;
+	}
+
+	clk_enable(gpmc_fck);
+	rate = clk_get_rate(gpmc_fck);
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+
+	if (is_gpmc_muxed())
+		muxed = 0x200;
+	else
+		muxed = 0;
+
 	/* Make sure CS1 timings are correct */
-	GPMC_CONFIG1_1 = 0x00011200;
-	GPMC_CONFIG2_1 = 0x001f1f01;
-	GPMC_CONFIG3_1 = 0x00080803;
-	GPMC_CONFIG4_1 = 0x1c091c09;
-	GPMC_CONFIG5_1 = 0x041f1f1f;
-	GPMC_CONFIG6_1 = 0x000004c4;
-	GPMC_CONFIG7_1 = 0x00000f40 | (0x08000000 >> 24);
+	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
+			  0x00011000 | muxed);
+
+	if (rate >= 160000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else if (rate >= 130000000) {
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
+	} else {/* rate = 100000000 */
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
+		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
+	}
+
+	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		goto out;
+	}
+
 	udelay(100);
 
 	omap_cfg_reg(M15_24XX_GPIO92);
 	if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
 		gpmc_cs_free(eth_cs);
+
+out:
+	clk_disable(gpmc_fck);
+	clk_put(gpmc_fck);
+}
+
+static void __init h4_init_flash(void)
+{
+	unsigned long base;
+
+	if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
+		printk("Can't request GPMC CS for flash\n");
+		return;
+	}
+	h4_flash_resource.start	= base;
+	h4_flash_resource.end	= base + SZ_64M - 1;
 }
 
 static void __init omap_h4_init_irq(void)
@@ -275,6 +365,7 @@ static void __init omap_h4_init_irq(void)
 	omap2_init_common_hw();
 	omap_init_irq();
 	omap_gpio_init();
+	h4_init_flash();
 }
 
 static struct omap_uart_config h4_uart_config __initdata = {
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index e6e85b7b097b..b57ffb5a22a5 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -1,20 +1,19 @@
 /*
  *  linux/arch/arm/mach-omap2/clock.c
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
- *
- *  Cleaned up and modified to use omap shared clock framework by
- *  Tony Lindgren <tony@atomide.com>
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
  *
- *  Based on omap1 clock.c, Copyright (C) 2004 - 2005 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#undef DEBUG
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -22,176 +21,227 @@
 #include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <asm/bitops.h>
 
 #include <asm/io.h>
 
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
+#include <asm/arch/cpu.h>
 #include <asm/div64.h>
 
-#include "prcm-regs.h"
 #include "memory.h"
+#include "sdrc.h"
 #include "clock.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "cm-regbits-34xx.h"
 
-#undef DEBUG
-
-//#define DOWN_VARIABLE_DPLL 1			/* Experimental */
+#define MAX_CLOCK_ENABLE_WAIT		100000
 
-static struct prcm_config *curr_prcm_set;
-static u32 curr_perf_level = PRCM_FULL_SPEED;
-static struct clk *vclk;
-static struct clk *sclk;
+u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
  * Omap2 specific clock functions
  *-------------------------------------------------------------------------*/
 
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
+/**
+ * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
+ * @clk: OMAP clock struct ptr to use
+ *
+ * Given a pointer to a source-selectable struct clk, read the hardware
+ * register and determine what its parent is currently set to.  Update the
+ * clk->parent field with the appropriate clk ptr.
+ */
+void omap2_init_clksel_parent(struct clk *clk)
 {
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 r, found = 0;
+
+	if (!clk->clksel)
+		return;
+
+	r = __raw_readl(clk->clksel_reg) & clk->clksel_mask;
+	r >>= __ffs(clk->clksel_mask);
+
+	for (clks = clk->clksel; clks->parent && !found; clks++) {
+		for (clkr = clks->rates; clkr->div && !found; clkr++) {
+			if ((clkr->flags & cpu_mask) && (clkr->val == r)) {
+				if (clk->parent != clks->parent) {
+					pr_debug("clock: inited %s parent "
+						 "to %s (was %s)\n",
+						 clk->name, clks->parent->name,
+						 ((clk->parent) ?
+						  clk->parent->name : "NULL"));
+					clk->parent = clks->parent;
+				};
+				found = 1;
+			}
+		}
+	}
+
+	if (!found)
+		printk(KERN_ERR "clock: init parent: could not find "
+		       "regval %0x for clock %s\n", r,  clk->name);
+
+	return;
 }
 
-static u32 omap2_get_dpll_rate(struct clk * tclk)
+/* Returns the DPLL rate */
+u32 omap2_get_dpll_rate(struct clk *clk)
 {
 	long long dpll_clk;
-	int dpll_mult, dpll_div, amult;
+	u32 dpll_mult, dpll_div, dpll;
+	const struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	/* REVISIT: What do we return on error? */
+	if (!dd)
+		return 0;
+
+	dpll = __raw_readl(dd->mult_div1_reg);
+	dpll_mult = dpll & dd->mult_mask;
+	dpll_mult >>= __ffs(dd->mult_mask);
+	dpll_div = dpll & dd->div1_mask;
+	dpll_div >>= __ffs(dd->div1_mask);
 
-	dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff;	/* 10 bits */
-	dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f;	/* 4 bits */
-	dpll_clk = (long long)tclk->parent->rate * dpll_mult;
+	dpll_clk = (long long)clk->parent->rate * dpll_mult;
 	do_div(dpll_clk, dpll_div + 1);
-	amult = CM_CLKSEL2_PLL & 0x3;
-	dpll_clk *= amult;
 
 	return dpll_clk;
 }
 
-static void omap2_followparent_recalc(struct clk *clk)
-{
-	followparent_recalc(clk);
-}
-
-static void omap2_propagate_rate(struct clk * clk)
+/*
+ * Used for clocks that have the same value as the parent clock,
+ * divided by some factor
+ */
+void omap2_fixed_divisor_recalc(struct clk *clk)
 {
-	if (!(clk->flags & RATE_FIXED))
-		clk->rate = clk->parent->rate;
+	WARN_ON(!clk->fixed_div);
 
-	propagate_rate(clk);
-}
+	clk->rate = clk->parent->rate / clk->fixed_div;
 
-static void omap2_set_osc_ck(int enable)
-{
-	if (enable)
-		PRCM_CLKSRC_CTRL &= ~(0x3 << 3);
-	else
-		PRCM_CLKSRC_CTRL |= 0x3 << 3;
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
 }
 
-/* Enable an APLL if off */
-static void omap2_clk_fixed_enable(struct clk *clk)
+/**
+ * omap2_wait_clock_ready - wait for clock to enable
+ * @reg: physical address of clock IDLEST register
+ * @mask: value to mask against to determine if the clock is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the clock enabled in time, or 0 if it failed to enable
+ * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ */
+int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
 {
-	u32 cval, i=0;
+	int i = 0;
+	int ena = 0;
 
-	if (clk->enable_bit == 0xff)			/* Parent will do it */
-		return;
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 */
+	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X)) {
+		ena = mask;
+	} else if (cpu_mask & RATE_IN_343X) {
+		ena = 0;
+	}
 
-	cval = CM_CLKEN_PLL;
+	/* Wait for lock */
+	while (((__raw_readl(reg) & mask) != ena) &&
+	       (i++ < MAX_CLOCK_ENABLE_WAIT)) {
+		udelay(1);
+	}
 
-	if ((cval & (0x3 << clk->enable_bit)) == (0x3 << clk->enable_bit))
-		return;
+	if (i < MAX_CLOCK_ENABLE_WAIT)
+		pr_debug("Clock %s stable after %d loops\n", name, i);
+	else
+		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
+		       name, MAX_CLOCK_ENABLE_WAIT);
 
-	cval &= ~(0x3 << clk->enable_bit);
-	cval |= (0x3 << clk->enable_bit);
-	CM_CLKEN_PLL = cval;
 
-	if (clk == &apll96_ck)
-		cval = (1 << 8);
-	else if (clk == &apll54_ck)
-		cval = (1 << 6);
+	return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
+};
 
-	while (!(CM_IDLEST_CKGEN & cval)) {		/* Wait for lock */
-		++i;
-		udelay(1);
-		if (i == 100000) {
-			printk(KERN_ERR "Clock %s didn't lock\n", clk->name);
-			break;
-		}
-	}
-}
 
+/*
+ * Note: We don't need special code here for INVERT_ENABLE
+ * for the time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
+ */
 static void omap2_clk_wait_ready(struct clk *clk)
 {
-	unsigned long reg, other_reg, st_reg;
+	void __iomem *reg, *other_reg, *st_reg;
 	u32 bit;
-	int i;
-
-	reg = (unsigned long) clk->enable_reg;
-	if (reg == (unsigned long) &CM_FCLKEN1_CORE ||
-	    reg == (unsigned long) &CM_FCLKEN2_CORE)
-		other_reg = (reg & ~0xf0) | 0x10;
-	else if (reg == (unsigned long) &CM_ICLKEN1_CORE ||
-		 reg == (unsigned long) &CM_ICLKEN2_CORE)
-		other_reg = (reg & ~0xf0) | 0x00;
+
+	/*
+	 * REVISIT: This code is pretty ugly.  It would be nice to generalize
+	 * it and pull it into struct clk itself somehow.
+	 */
+	reg = clk->enable_reg;
+	if ((((u32)reg & 0xff) >= CM_FCLKEN1) &&
+	    (((u32)reg & 0xff) <= OMAP24XX_CM_FCLKEN2))
+		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x10); /* CM_ICLKEN* */
+	else if ((((u32)reg & 0xff) >= CM_ICLKEN1) &&
+		 (((u32)reg & 0xff) <= OMAP24XX_CM_ICLKEN4))
+		other_reg = (void __iomem *)(((u32)reg & ~0xf0) | 0x00); /* CM_FCLKEN* */
 	else
 		return;
 
+	/* REVISIT: What are the appropriate exclusions for 34XX? */
 	/* No check for DSS or cam clocks */
-	if ((reg & 0x0f) == 0) {
-		if (clk->enable_bit <= 1 || clk->enable_bit == 31)
+	if (cpu_is_omap24xx() && ((u32)reg & 0x0f) == 0) { /* CM_{F,I}CLKEN1 */
+		if (clk->enable_bit == OMAP24XX_EN_DSS2_SHIFT ||
+		    clk->enable_bit == OMAP24XX_EN_DSS1_SHIFT ||
+		    clk->enable_bit == OMAP24XX_EN_CAM_SHIFT)
 			return;
 	}
 
+	/* REVISIT: What are the appropriate exclusions for 34XX? */
+	/* OMAP3: ignore DSS-mod clocks */
+	if (cpu_is_omap34xx() &&
+	    (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+		return;
+
 	/* Check if both functional and interface clocks
 	 * are running. */
 	bit = 1 << clk->enable_bit;
 	if (!(__raw_readl(other_reg) & bit))
 		return;
-	st_reg = (other_reg & ~0xf0) | 0x20;
-	i = 0;
-	while (!(__raw_readl(st_reg) & bit)) {
-		i++;
-		if (i == 100000) {
-			printk(KERN_ERR "Timeout enabling clock %s\n", clk->name);
-			break;
-		}
-	}
-	if (i)
-		pr_debug("Clock %s stable after %d loops\n", clk->name, i);
+	st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+
+	omap2_wait_clock_ready(st_reg, bit, clk->name);
 }
 
 /* Enables clock without considering parent dependencies or use count
  * REVISIT: Maybe change this to use clk->enable like on omap1?
  */
-static int _omap2_clk_enable(struct clk * clk)
+int _omap2_clk_enable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (clk->flags & ALWAYS_ENABLED)
+	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return 0;
 
-	if (unlikely(clk == &osc_ck)) {
-		omap2_set_osc_ck(1);
-		return 0;
-	}
+	if (clk->enable)
+		return clk->enable(clk);
 
 	if (unlikely(clk->enable_reg == 0)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
-		return 0;
-	}
-
-	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
-		omap2_clk_fixed_enable(clk);
-		return 0;
+		return 0; /* REVISIT: -EINVAL */
 	}
 
 	regval32 = __raw_readl(clk->enable_reg);
-	regval32 |= (1 << clk->enable_bit);
+	if (clk->flags & INVERT_ENABLE)
+		regval32 &= ~(1 << clk->enable_bit);
+	else
+		regval32 |= (1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 
@@ -200,44 +250,48 @@ static int _omap2_clk_enable(struct clk * clk)
 	return 0;
 }
 
-/* Stop APLL */
-static void omap2_clk_fixed_disable(struct clk *clk)
-{
-	u32 cval;
-
-	if(clk->enable_bit == 0xff)		/* let parent off do it */
-		return;
-
-	cval = CM_CLKEN_PLL;
-	cval &= ~(0x3 << clk->enable_bit);
-	CM_CLKEN_PLL = cval;
-}
-
 /* Disables clock without considering parent dependencies or use count */
-static void _omap2_clk_disable(struct clk *clk)
+void _omap2_clk_disable(struct clk *clk)
 {
 	u32 regval32;
 
-	if (unlikely(clk == &osc_ck)) {
-		omap2_set_osc_ck(0);
+	if (clk->flags & (ALWAYS_ENABLED | PARENT_CONTROLS_CLOCK))
 		return;
-	}
 
-	if (clk->enable_reg == 0)
+	if (clk->disable) {
+		clk->disable(clk);
 		return;
+	}
 
-	if (clk->enable_reg == (void __iomem *)&CM_CLKEN_PLL) {
-		omap2_clk_fixed_disable(clk);
+	if (clk->enable_reg == 0) {
+		/*
+		 * 'Independent' here refers to a clock which is not
+		 * controlled by its parent.
+		 */
+		printk(KERN_ERR "clock: clk_disable called on independent "
+		       "clock %s which has no enable_reg\n", clk->name);
 		return;
 	}
 
 	regval32 = __raw_readl(clk->enable_reg);
-	regval32 &= ~(1 << clk->enable_bit);
+	if (clk->flags & INVERT_ENABLE)
+		regval32 |= (1 << clk->enable_bit);
+	else
+		regval32 &= ~(1 << clk->enable_bit);
 	__raw_writel(regval32, clk->enable_reg);
 	wmb();
 }
 
-static int omap2_clk_enable(struct clk *clk)
+void omap2_clk_disable(struct clk *clk)
+{
+	if (clk->usecount > 0 && !(--clk->usecount)) {
+		_omap2_clk_disable(clk);
+		if (likely((u32)clk->parent))
+			omap2_clk_disable(clk->parent);
+	}
+}
+
+int omap2_clk_enable(struct clk *clk)
 {
 	int ret = 0;
 
@@ -261,519 +315,314 @@ static int omap2_clk_enable(struct clk *clk)
 	return ret;
 }
 
-static void omap2_clk_disable(struct clk *clk)
-{
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		_omap2_clk_disable(clk);
-		if (likely((u32)clk->parent))
-			omap2_clk_disable(clk->parent);
-	}
-}
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static u32 omap2_dpll_round_rate(unsigned long target_rate)
-{
-	u32 high, low;
-
-	if ((CM_CLKSEL2_PLL & 0x3) == 1) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
 /*
  * Used for clocks that are part of CLKSEL_xyz governed clocks.
  * REVISIT: Maybe change to use clk->enable() functions like on omap1?
  */
-static void omap2_clksel_recalc(struct clk * clk)
+void omap2_clksel_recalc(struct clk *clk)
 {
-	u32 fixed = 0, div = 0;
+	u32 div = 0;
 
-	if (clk == &dpll_ck) {
-		clk->rate = omap2_get_dpll_rate(clk);
-		fixed = 1;
-		div = 0;
-	}
+	pr_debug("clock: recalc'ing clksel clk %s\n", clk->name);
 
-	if (clk == &iva1_mpu_int_ifck) {
-		div = 2;
-		fixed = 1;
-	}
-
-	if ((clk == &dss1_fck) && ((CM_CLKSEL1_CORE & (0x1f << 8)) == 0)) {
-		clk->rate = sys_ck.rate;
+	div = omap2_clksel_get_divisor(clk);
+	if (div == 0)
 		return;
-	}
 
-	if (!fixed) {
-		div = omap2_clksel_get_divisor(clk);
-		if (div == 0)
-			return;
-	}
+	if (unlikely(clk->rate == clk->parent->rate / div))
+		return;
+	clk->rate = clk->parent->rate / div;
 
-	if (div != 0) {
-		if (unlikely(clk->rate == clk->parent->rate / div))
-			return;
-		clk->rate = clk->parent->rate / div;
-	}
+	pr_debug("clock: new clock rate is %ld (div %d)\n", clk->rate, div);
 
 	if (unlikely(clk->flags & RATE_PROPAGATES))
 		propagate_rate(clk);
 }
 
-/*
- * Finds best divider value in an array based on the source and target
- * rates. The divider array must be sorted with smallest divider first.
+/**
+ * omap2_get_clksel_by_parent - return clksel struct for a given clk & parent
+ * @clk: OMAP struct clk ptr to inspect
+ * @src_clk: OMAP struct clk ptr of the parent clk to search for
+ *
+ * Scan the struct clksel array associated with the clock to find
+ * the element associated with the supplied parent clock address.
+ * Returns a pointer to the struct clksel on success or NULL on error.
  */
-static inline u32 omap2_divider_from_table(u32 size, u32 *div_array,
-					   u32 src_rate, u32 tgt_rate)
+const struct clksel *omap2_get_clksel_by_parent(struct clk *clk,
+						struct clk *src_clk)
 {
-	int i, test_rate;
+	const struct clksel *clks;
 
-	if (div_array == NULL)
-		return ~1;
+	if (!clk->clksel)
+		return NULL;
 
-	for (i=0; i < size; i++) {
-		test_rate = src_rate / *div_array;
-		if (test_rate <= tgt_rate)
-			return *div_array;
-		++div_array;
+	for (clks = clk->clksel; clks->parent; clks++) {
+		if (clks->parent == src_clk)
+			break; /* Found the requested parent */
 	}
 
-	return ~0;	/* No acceptable divider */
+	if (!clks->parent) {
+		printk(KERN_ERR "clock: Could not find parent clock %s in "
+		       "clksel array of clock %s\n", src_clk->name,
+		       clk->name);
+		return NULL;
+	}
+
+	return clks;
 }
 
-/*
- * Find divisor for the given clock and target rate.
+/**
+ * omap2_clksel_round_rate_div - find divisor for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ * @new_div: ptr to where we should store the divisor
  *
+ * Finds 'best' divider value in an array based on the source and target
+ * rates.  The divider array must be sorted with smallest divider first.
  * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
  * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
  */
-static u32 omap2_clksel_round_rate(struct clk *tclk, u32 target_rate,
-	u32 *new_div)
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div)
 {
-	u32 gfx_div[] = {2, 3, 4};
-	u32 sysclkout_div[] = {1, 2, 4, 8, 16};
-	u32 dss1_div[] = {1, 2, 3, 4, 5, 6, 8, 9, 12, 16};
-	u32 vylnq_div[] = {1, 2, 3, 4, 6, 8, 9, 12, 16, 18};
-	u32 best_div = ~0, asize = 0;
-	u32 *div_array = NULL;
-
-	switch (tclk->flags & SRC_RATE_SEL_MASK) {
-	case CM_GFX_SEL1:
-		asize = 3;
-		div_array = gfx_div;
-		break;
-	case CM_PLL_SEL1:
-		return omap2_dpll_round_rate(target_rate);
-	case CM_SYSCLKOUT_SEL1:
-		asize = 5;
-		div_array = sysclkout_div;
-		break;
-	case CM_CORE_SEL1:
-		if(tclk == &dss1_fck){
-			if(tclk->parent == &core_ck){
-				asize = 10;
-				div_array = dss1_div;
-			} else {
-				*new_div = 0; /* fixed clk */
-				return(tclk->parent->rate);
-			}
-		} else if((tclk == &vlynq_fck) && cpu_is_omap2420()){
-			if(tclk->parent == &core_ck){
-				asize = 10;
-				div_array = vylnq_div;
-			} else {
-				*new_div = 0; /* fixed clk */
-				return(tclk->parent->rate);
-			}
-		}
-		break;
+	unsigned long test_rate;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
+	u32 last_div = 0;
+
+	printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
+	       clk->name, target_rate);
+
+	*new_div = 1;
+
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return ~0;
+
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (!(clkr->flags & cpu_mask))
+		    continue;
+
+		/* Sanity check */
+		if (clkr->div <= last_div)
+			printk(KERN_ERR "clock: clksel_rate table not sorted "
+			       "for clock %s", clk->name);
+
+		last_div = clkr->div;
+
+		test_rate = clk->parent->rate / clkr->div;
+
+		if (test_rate <= target_rate)
+			break; /* found it */
 	}
 
-	best_div = omap2_divider_from_table(asize, div_array,
-	 tclk->parent->rate, target_rate);
-	if (best_div == ~0){
-		*new_div = 1;
-		return best_div; /* signal error */
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor for target "
+		       "rate %ld for clock %s parent %s\n", target_rate,
+		       clk->name, clk->parent->name);
+		return ~0;
 	}
 
-	*new_div = best_div;
-	return (tclk->parent->rate / best_div);
+	*new_div = clkr->div;
+
+	printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
+	       (clk->parent->rate / clkr->div));
+
+	return (clk->parent->rate / clkr->div);
 }
 
-/* Given a clock and a rate apply a clock specific rounding function */
-static long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+/**
+ * omap2_clksel_round_rate - find rounded rate for the given clock and rate
+ * @clk: OMAP struct clk to use
+ * @target_rate: desired clock rate
+ *
+ * Compatibility wrapper for OMAP clock framework
+ * Finds best target rate based on the source clock and possible dividers.
+ * rates. The divider array must be sorted with smallest divider first.
+ * Note that this will not work for clocks which are part of CONFIG_PARTICIPANT,
+ * they are only settable as part of virtual_prcm set.
+ *
+ * Returns the rounded clock rate or returns 0xffffffff on error.
+ */
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate)
 {
-	u32 new_div = 0;
-	int valid_rate;
+	u32 new_div;
 
-	if (clk->flags & RATE_FIXED)
-		return clk->rate;
+	return omap2_clksel_round_rate_div(clk, target_rate, &new_div);
+}
 
-	if (clk->flags & RATE_CKCTL) {
-		valid_rate = omap2_clksel_round_rate(clk, rate, &new_div);
-		return valid_rate;
-	}
 
+/* Given a clock and a rate apply a clock specific rounding function */
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate)
+{
 	if (clk->round_rate != 0)
 		return clk->round_rate(clk, rate);
 
+	if (clk->flags & RATE_FIXED)
+		printk(KERN_ERR "clock: generic omap2_clk_round_rate called "
+		       "on fixed-rate clock %s\n", clk->name);
+
 	return clk->rate;
 }
 
-/*
- * Check the DLL lock state, and return tue if running in unlock mode.
- * This is needed to compensate for the shifted DLL value in unlock mode.
+/**
+ * omap2_clksel_to_divisor() - turn clksel field value into integer divider
+ * @clk: OMAP struct clk to use
+ * @field_val: register field value to find
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a register field
+ * value to search for, find the corresponding clock divisor.  The register
+ * field value should be pre-masked and shifted down so the LSB is at bit 0
+ * before calling.  Returns 0 on error
  */
-static u32 omap2_dll_force_needed(void)
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val)
 {
-	u32 dll_state = SDRC_DLLA_CTRL;		/* dlla and dllb are a set */
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	if ((dll_state & (1 << 2)) == (1 << 2))
-		return 1;
-	else
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
 		return 0;
-}
 
-static u32 omap2_reprogram_sdrc(u32 level, u32 force)
-{
-	u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
-	u32 prev = curr_perf_level, flags;
-
-	if ((curr_perf_level == level) && !force)
-		return prev;
-
-	m_type = omap2_memory_get_type();
-	slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
-	fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
-
-	if (level == PRCM_HALF_SPEED) {
-		local_irq_save(flags);
-		PRCM_VOLTSETUP = 0xffff;
-		omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
-					  slow_dll_ctrl, m_type);
-		curr_perf_level = PRCM_HALF_SPEED;
-		local_irq_restore(flags);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->val == field_val))
+			break;
 	}
-	if (level == PRCM_FULL_SPEED) {
-		local_irq_save(flags);
-		PRCM_VOLTSETUP = 0xffff;
-		omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
-					  fast_dll_ctrl, m_type);
-		curr_perf_level = PRCM_FULL_SPEED;
-		local_irq_restore(flags);
+
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find fieldval %d for "
+		       "clock %s parent %s\n", field_val, clk->name,
+		       clk->parent->name);
+		return 0;
 	}
 
-	return prev;
+	return clkr->div;
 }
 
-static int omap2_reprogram_dpll(struct clk * clk, unsigned long rate)
+/**
+ * omap2_divisor_to_clksel() - turn clksel integer divisor into a field value
+ * @clk: OMAP struct clk to use
+ * @div: integer divisor to search for
+ *
+ * Given a struct clk of a rate-selectable clksel clock, and a clock divisor,
+ * find the corresponding register field value.  The return register value is
+ * the value before left-shifting.  Returns 0xffffffff on error
+ */
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div)
 {
-	u32 flags, cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	int ret = -EINVAL;
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-	local_irq_save(flags);
-	cur_rate = omap2_get_dpll_rate(&dpll_ck);
-	mult = CM_CLKSEL2_PLL & 0x3;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpll_round_rate(rate);
-		if (valid_rate != rate)
-			goto dpll_exit;
-
-		if ((CM_CLKSEL2_PLL & 0x3) == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		tmpset.cm_clksel1_pll = CM_CLKSEL1_PLL;
-		tmpset.cm_clksel1_pll &= ~(0x3FFF << 8);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = CM_CLKSEL2_PLL;
-		tmpset.cm_clksel2_pll &= ~0x3;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= 0x2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = PRCM_FULL_SPEED;
-		} else {
-			tmpset.cm_clksel2_pll |= 0x1;
-			mult = (rate / 1000000);
-			done_rate = PRCM_HALF_SPEED;
-		}
-		tmpset.cm_clksel1_pll |= ((div << 8) | (mult << 12));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = V24XX_SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
+	/* should never happen */
+	WARN_ON(div == 0);
 
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1); /* For init_mem */
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
+	clks = omap2_get_clksel_by_parent(clk, clk->parent);
+	if (clks == NULL)
+		return 0;
 
-		/* Errata: ret dll entry state */
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if ((clkr->flags & cpu_mask) && (clkr->div == div))
+			break;
 	}
-	omap2_clksel_recalc(&dpll_ck);
-	ret = 0;
 
-dpll_exit:
-	local_irq_restore(flags);
-	return(ret);
-}
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find divisor %d for "
+		       "clock %s parent %s\n", div, clk->name,
+		       clk->parent->name);
+		return 0;
+	}
 
-/* Just return the MPU speed */
-static void omap2_mpu_recalc(struct clk * clk)
-{
-	clk->rate = curr_prcm_set->mpu_speed;
+	return clkr->val;
 }
 
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
+/**
+ * omap2_get_clksel - find clksel register addr & field mask for a clk
+ * @clk: struct clk to use
+ * @field_mask: ptr to u32 to store the register field mask
  *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
+ * Returns the address of the clksel register upon success or NULL on error.
  */
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate)
+void __iomem *omap2_get_clksel(struct clk *clk, u32 *field_mask)
 {
-	struct prcm_config * ptr;
-	long highest_rate;
-
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (ptr->xtal_speed != sys_ck.rate)
-			continue;
+	if (unlikely((clk->clksel_reg == 0) || (clk->clksel_mask == 0)))
+		return NULL;
 
-		highest_rate = ptr->mpu_speed;
+	*field_mask = clk->clksel_mask;
 
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
+	return clk->clksel_reg;
 }
 
-/*
- * omap2_convert_field_to_div() - turn field value into integer divider
+/**
+ * omap2_clksel_get_divisor - get current divider applied to parent clock.
+ * @clk: OMAP struct clk to use.
+ *
+ * Returns the integer divisor upon success or 0 on error.
  */
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val)
+u32 omap2_clksel_get_divisor(struct clk *clk)
 {
-	u32 i;
-	u32 clkout_array[] = {1, 2, 4, 8, 16};
+	u32 field_mask, field_val;
+	void __iomem *div_addr;
 
-	if ((div_sel & SRC_RATE_SEL_MASK) == CM_SYSCLKOUT_SEL1) {
-		for (i = 0; i < 5; i++) {
-			if (field_val == i)
-				return clkout_array[i];
-		}
-		return ~0;
-	} else
-		return field_val;
+	div_addr = omap2_get_clksel(clk, &field_mask);
+	if (div_addr == 0)
+		return 0;
+
+	field_val = __raw_readl(div_addr) & field_mask;
+	field_val >>= __ffs(field_mask);
+
+	return omap2_clksel_to_divisor(clk, field_val);
 }
 
-/*
- * Returns the CLKSEL divider register value
- * REVISIT: This should be cleaned up to work nicely with void __iomem *
- */
-static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
-			    struct clk *clk)
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate)
 {
-	int ret = ~0;
-	u32 reg_val, div_off;
-	u32 div_addr = 0;
-	u32 mask = ~0;
-
-	div_off = clk->rate_offset;
-
-	switch ((*div_sel & SRC_RATE_SEL_MASK)) {
-	case CM_MPU_SEL1:
-		div_addr = (u32)&CM_CLKSEL_MPU;
-		mask = 0x1f;
-		break;
-	case CM_DSP_SEL1:
-		div_addr = (u32)&CM_CLKSEL_DSP;
-		if (cpu_is_omap2420()) {
-			if ((div_off == 0) || (div_off == 8))
-				mask = 0x1f;
-			else if (div_off == 5)
-				mask = 0x3;
-		} else if (cpu_is_omap2430()) {
-			if (div_off == 0)
-				mask = 0x1f;
-			else if (div_off == 5)
-				mask = 0x3;
-		}
-		break;
-	case CM_GFX_SEL1:
-		div_addr = (u32)&CM_CLKSEL_GFX;
-		if (div_off == 0)
-			mask = 0x7;
-		break;
-	case CM_MODEM_SEL1:
-		div_addr = (u32)&CM_CLKSEL_MDM;
-		if (div_off == 0)
-			mask = 0xf;
-		break;
-	case CM_SYSCLKOUT_SEL1:
-		div_addr = (u32)&PRCM_CLKOUT_CTRL;
-		if ((div_off == 3) || (div_off == 11))
-			mask= 0x3;
-		break;
-	case CM_CORE_SEL1:
-		div_addr = (u32)&CM_CLKSEL1_CORE;
-		switch (div_off) {
-		case 0:					/* l3 */
-		case 8:					/* dss1 */
-		case 15:				/* vylnc-2420 */
-		case 20:				/* ssi */
-			mask = 0x1f; break;
-		case 5:					/* l4 */
-			mask = 0x3; break;
-		case 13:				/* dss2 */
-			mask = 0x1; break;
-		case 25:				/* usb */
-			mask = 0x7; break;
-		}
-	}
+	u32 field_mask, field_val, reg_val, validrate, new_div = 0;
+	void __iomem *div_addr;
 
-	*field_mask = mask;
+	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
+	if (validrate != rate)
+		return -EINVAL;
 
-	if (unlikely(mask == ~0))
-		div_addr = 0;
+	div_addr = omap2_get_clksel(clk, &field_mask);
+	if (div_addr == 0)
+		return -EINVAL;
 
-	*div_sel = div_addr;
+	field_val = omap2_divisor_to_clksel(clk, new_div);
+	if (field_val == ~0)
+		return -EINVAL;
 
-	if (unlikely(div_addr == 0))
-		return ret;
+	reg_val = __raw_readl(div_addr);
+	reg_val &= ~field_mask;
+	reg_val |= (field_val << __ffs(field_mask));
+	__raw_writel(reg_val, div_addr);
+	wmb();
 
-	/* Isolate field */
-	reg_val = __raw_readl((void __iomem *)div_addr) & (mask << div_off);
+	clk->rate = clk->parent->rate / new_div;
 
-	/* Normalize back to divider value */
-	reg_val >>= div_off;
+	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		wmb();
+	}
 
-	return reg_val;
+	return 0;
 }
 
-/*
- * Return divider to be applied to parent clock.
- * Return 0 on error.
- */
-static u32 omap2_clksel_get_divisor(struct clk *clk)
-{
-	int ret = 0;
-	u32 div, div_sel, div_off, field_mask, field_val;
-
-	/* isolate control register */
-	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-
-	div_off = clk->rate_offset;
-	field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
-	if (div_sel == 0)
-		return ret;
-
-	div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-	div = omap2_clksel_to_divisor(div_sel, field_val);
-
-	return div;
-}
 
 /* Set the clock rate for a clock source */
-static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
-
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int ret = -EINVAL;
-	void __iomem * reg;
-	u32 div_sel, div_off, field_mask, field_val, reg_val, validrate;
-	u32 new_div = 0;
-
-	if (!(clk->flags & CONFIG_PARTICIPANT) && (clk->flags & RATE_CKCTL)) {
-		if (clk == &dpll_ck)
-			return omap2_reprogram_dpll(clk, rate);
-
-		/* Isolate control register */
-		div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		div_off = clk->rate_offset;
-
-		validrate = omap2_clksel_round_rate(clk, rate, &new_div);
-		if (validrate != rate)
-			return(ret);
 
-		field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
-		if (div_sel == 0)
-			return ret;
-
-		if (clk->flags & CM_SYSCLKOUT_SEL1) {
-			switch (new_div) {
-			case 16:
-				field_val = 4;
-				break;
-			case 8:
-				field_val = 3;
-				break;
-			case 4:
-				field_val = 2;
-				break;
-			case 2:
-				field_val = 1;
-				break;
-			case 1:
-				field_val = 0;
-				break;
-			}
-		} else
-			field_val = new_div;
+	pr_debug("clock: set_rate for clock %s to rate %ld\n", clk->name, rate);
 
-		reg = (void __iomem *)div_sel;
-
-		reg_val = __raw_readl(reg);
-		reg_val &= ~(field_mask << div_off);
-		reg_val |= (field_val << div_off);
-		__raw_writel(reg_val, reg);
-		wmb();
-		clk->rate = clk->parent->rate / field_val;
+	/* CONFIG_PARTICIPANT clocks are changed only in sets via the
+	   rate table mechanism, driven by mpu_speed  */
+	if (clk->flags & CONFIG_PARTICIPANT)
+		return -EINVAL;
 
-		if (clk->flags & DELAYED_APP) {
-			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-			wmb();
-		}
-		ret = 0;
-	} else if (clk->set_rate != 0)
+	/* dpll_ck, core_ck, virt_prcm_set; plus all clksel clocks */
+	if (clk->set_rate != 0)
 		ret = clk->set_rate(clk, rate);
 
 	if (unlikely(ret == 0 && (clk->flags & RATE_PROPAGATES)))
@@ -782,242 +631,92 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 	return ret;
 }
 
-/* Converts encoded control register address into a full address */
-static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
-			       struct clk *src_clk, u32 *field_mask)
-{
-	u32 val = ~0, src_reg_addr = 0, mask = 0;
-
-	/* Find target control register.*/
-	switch ((*type_to_addr & SRC_RATE_SEL_MASK)) {
-	case CM_CORE_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL1_CORE;
-		if (reg_offset == 13) {			/* DSS2_fclk */
-			mask = 0x1;
-			if (src_clk == &sys_ck)
-				val = 0;
-			if (src_clk == &func_48m_ck)
-				val = 1;
-		} else if (reg_offset == 8) {		/* DSS1_fclk */
-			mask = 0x1f;
-			if (src_clk == &sys_ck)
-				val = 0;
-			else if (src_clk == &core_ck)	/* divided clock */
-				val = 0x10;		/* rate needs fixing */
-		} else if ((reg_offset == 15) && cpu_is_omap2420()){ /*vlnyq*/
-			mask = 0x1F;
-			if(src_clk == &func_96m_ck)
-				val = 0;
-			else if (src_clk == &core_ck)
-				val = 0x10;
-		}
-		break;
-	case CM_CORE_SEL2:
-		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &sys_ck)
-			val = 0x1;
-		if (src_clk == &alt_ck)
-			val = 0x2;
-		break;
-	case CM_WKUP_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL_WKUP;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &sys_ck)
-			val = 0x1;
-		if (src_clk == &alt_ck)
-			val = 0x2;
-		break;
-	case CM_PLL_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL1_PLL;
-		mask = 0x1;
-		if (reg_offset == 0x3) {
-			if (src_clk == &apll96_ck)
-				val = 0;
-			if (src_clk == &alt_ck)
-				val = 1;
-		}
-		else if (reg_offset == 0x5) {
-			if (src_clk == &apll54_ck)
-				val = 0;
-			if (src_clk == &alt_ck)
-				val = 1;
-		}
-		break;
-	case CM_PLL_SEL2:
-		src_reg_addr = (u32)&CM_CLKSEL2_PLL;
-		mask = 0x3;
-		if (src_clk == &func_32k_ck)
-			val = 0x0;
-		if (src_clk == &dpll_ck)
-			val = 0x2;
-		break;
-	case CM_SYSCLKOUT_SEL1:
-		src_reg_addr = (u32)&PRCM_CLKOUT_CTRL;
-		mask = 0x3;
-		if (src_clk == &dpll_ck)
-			val = 0;
-		if (src_clk == &sys_ck)
-			val = 1;
-		if (src_clk == &func_96m_ck)
-			val = 2;
-		if (src_clk == &func_54m_ck)
-			val = 3;
-		break;
-	}
-
-	if (val == ~0)			/* Catch errors in offset */
-		*type_to_addr = 0;
-	else
-		*type_to_addr = src_reg_addr;
-	*field_mask = mask;
-
-	return val;
-}
-
-static int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
+/*
+ * Converts encoded control register address into a full address
+ * On error, *src_addr will be returned as 0.
+ */
+static u32 omap2_clksel_get_src_field(void __iomem **src_addr,
+				      struct clk *src_clk, u32 *field_mask,
+				      struct clk *clk, u32 *parent_div)
 {
-	void __iomem * reg;
-	u32 src_sel, src_off, field_val, field_mask, reg_val, rate;
-	int ret = -EINVAL;
-
-	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
-		return ret;
-
-	if (clk->flags & SRC_SEL_MASK) {	/* On-chip SEL collection */
-		src_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		src_off = clk->src_offset;
-
-		if (src_sel == 0)
-			goto set_parent_error;
-
-		field_val = omap2_get_src_field(&src_sel, src_off, new_parent,
-						&field_mask);
-
-		reg = (void __iomem *)src_sel;
-
-		if (clk->usecount > 0)
-			_omap2_clk_disable(clk);
-
-		/* Set new source value (previous dividers if any in effect) */
-		reg_val = __raw_readl(reg) & ~(field_mask << src_off);
-		reg_val |= (field_val << src_off);
-		__raw_writel(reg_val, reg);
-		wmb();
+	const struct clksel *clks;
+	const struct clksel_rate *clkr;
 
-		if (clk->flags & DELAYED_APP) {
-			__raw_writel(0x1, (void __iomem *)&PRCM_CLKCFG_CTRL);
-			wmb();
-		}
-		if (clk->usecount > 0)
-			_omap2_clk_enable(clk);
-
-		clk->parent = new_parent;
+	*parent_div = 0;
+	*src_addr = 0;
 
-		/* SRC_RATE_SEL_MASK clocks follow their parents rates.*/
-		if ((new_parent == &core_ck) && (clk == &dss1_fck))
-			clk->rate = new_parent->rate / 0x10;
-		else
-			clk->rate = new_parent->rate;
+	clks = omap2_get_clksel_by_parent(clk, src_clk);
+	if (clks == NULL)
+		return 0;
 
-		if (unlikely(clk->flags & RATE_PROPAGATES))
-			propagate_rate(clk);
+	for (clkr = clks->rates; clkr->div; clkr++) {
+		if (clkr->flags & (cpu_mask | DEFAULT_RATE))
+			break; /* Found the default rate for this platform */
+	}
 
+	if (!clkr->div) {
+		printk(KERN_ERR "clock: Could not find default rate for "
+		       "clock %s parent %s\n", clk->name,
+		       src_clk->parent->name);
 		return 0;
-	} else {
-		clk->parent = new_parent;
-		rate = new_parent->rate;
-		omap2_clk_set_rate(clk, rate);
-		ret = 0;
 	}
 
- set_parent_error:
-	return ret;
+	/* Should never happen.  Add a clksel mask to the struct clk. */
+	WARN_ON(clk->clksel_mask == 0);
+
+	*field_mask = clk->clksel_mask;
+	*src_addr = clk->clksel_reg;
+	*parent_div = clkr->div;
+
+	return clkr->val;
 }
 
-/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent)
 {
-	u32 flags, cur_rate, done_rate, bypass = 0;
-	u8 cpu_mask = 0;
-	struct prcm_config *prcm;
-	unsigned long found_speed = 0;
+	void __iomem *src_addr;
+	u32 field_val, field_mask, reg_val, parent_div;
 
-	if (clk != &virt_prcm_set)
+	if (unlikely(clk->flags & CONFIG_PARTICIPANT))
 		return -EINVAL;
 
-	/* FIXME: Change cpu_is_omap2420() to cpu_is_omap242x() */
-	if (cpu_is_omap2420())
-		cpu_mask = RATE_IN_242X;
-	else if (cpu_is_omap2430())
-		cpu_mask = RATE_IN_243X;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-	 rate / 1000000);
+	if (!clk->clksel)
 		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2_get_dpll_rate(&dpll_ck);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2_reprogram_sdrc(PRCM_HALF_SPEED, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
 
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
+	field_val = omap2_clksel_get_src_field(&src_addr, new_parent,
+					       &field_mask, clk, &parent_div);
+	if (src_addr == 0)
+		return -EINVAL;
 
-		if ((prcm->cm_clksel2_pll & 0x3) == 2)
-			done_rate = PRCM_FULL_SPEED;
-		else
-			done_rate = PRCM_HALF_SPEED;
+	if (clk->usecount > 0)
+		_omap2_clk_disable(clk);
 
-		/* MPU divider */
-		CM_CLKSEL_MPU = prcm->cm_clksel_mpu;
+	/* Set new source value (previous dividers if any in effect) */
+	reg_val = __raw_readl(src_addr) & ~field_mask;
+	reg_val |= (field_val << __ffs(field_mask));
+	__raw_writel(reg_val, src_addr);
+	wmb();
 
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		CM_CLKSEL_DSP = prcm->cm_clksel_dsp;
+	if (clk->flags & DELAYED_APP && cpu_is_omap24xx()) {
+		__raw_writel(OMAP24XX_VALID_CONFIG, OMAP24XX_PRCM_CLKCFG_CTRL);
+		wmb();
+	}
 
-		CM_CLKSEL_GFX = prcm->cm_clksel_gfx;
+	if (clk->usecount > 0)
+		_omap2_clk_enable(clk);
 
-		/* Major subsystem dividers */
-		CM_CLKSEL1_CORE = prcm->cm_clksel1_core;
-		if (cpu_is_omap2430())
-			CM_CLKSEL_MDM = prcm->cm_clksel_mdm;
+	clk->parent = new_parent;
 
-		/* x2 to enter init_mem */
-		omap2_reprogram_sdrc(PRCM_FULL_SPEED, 1);
+	/* CLKSEL clocks follow their parents' rates, divided by a divisor */
+	clk->rate = new_parent->rate;
 
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
+	if (parent_div > 0)
+		clk->rate /= parent_div;
 
-		omap2_init_memory_params(omap2_dll_force_needed());
-		omap2_reprogram_sdrc(done_rate, 0);
+	pr_debug("clock: set parent of %s to %s (new rate %ld)\n",
+		 clk->name, clk->parent->name, clk->rate);
 
-		local_irq_restore(flags);
-	}
-	omap2_clksel_recalc(&dpll_ck);
+	if (unlikely(clk->flags & RATE_PROPAGATES))
+		propagate_rate(clk);
 
 	return 0;
 }
@@ -1027,150 +726,17 @@ static int omap2_select_table_rate(struct clk * clk, unsigned long rate)
  *-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
-static void __init omap2_clk_disable_unused(struct clk *clk)
+void omap2_clk_disable_unused(struct clk *clk)
 {
-	u32 regval32;
+	u32 regval32, v;
+
+	v = (clk->flags & INVERT_ENABLE) ? (1 << clk->enable_bit) : 0;
 
 	regval32 = __raw_readl(clk->enable_reg);
-	if ((regval32 & (1 << clk->enable_bit)) == 0)
+	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
 	printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
 	_omap2_clk_disable(clk);
 }
-#else
-#define omap2_clk_disable_unused	NULL
 #endif
-
-static struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-};
-
-static void __init omap2_get_crystal_rate(struct clk *osc, struct clk *sys)
-{
-	u32 div, aplls, sclk = 13000000;
-
-	aplls = CM_CLKSEL1_PLL;
-	aplls &= ((1 << 23) | (1 << 24) | (1 << 25));
-	aplls >>= 23;			/* Isolate field, 0,2,3 */
-
-	if (aplls == 0)
-		sclk = 19200000;
-	else if (aplls == 2)
-		sclk = 13000000;
-	else if (aplls == 3)
-		sclk = 12000000;
-
-	div = PRCM_CLKSRC_CTRL;
-	div &= ((1 << 7) | (1 << 6));
-	div >>= sys->rate_offset;
-
-	osc->rate = sclk * div;
-	sys->rate = sclk;
-}
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	if (!mpurate)
-		return -EINVAL;
-
-	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	propagate_rate(&osc_ck);		/* update main root fast */
-	propagate_rate(&func_32k_ck);		/* update main root slow */
-
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-int __init omap2_clk_init(void)
-{
-	struct prcm_config *prcm;
-	struct clk ** clkp;
-	u32 clkrate;
-
-	clk_init(&omap2_clk_functions);
-	omap2_get_crystal_rate(&osc_ck, &sys_ck);
-
-	for (clkp = onchip_clks; clkp < onchip_clks + ARRAY_SIZE(onchip_clks);
-	     clkp++) {
-
-		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
-			clk_register(*clkp);
-			continue;
-		}
-
-		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
-			clk_register(*clkp);
-			continue;
-		}
-	}
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
-
-	propagate_rate(&osc_ck);		/* update main root fast */
-	propagate_rate(&func_32k_ck);		/* update main root slow */
-
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&sync_32k_ick);
-	clk_enable(&omapctrl_ick);
-
-	/* Force the APLLs always active. The clocks are idled
-	 * automatically by hardware. */
-	clk_enable(&apll96_ck);
-	clk_enable(&apll54_ck);
-
-	if (cpu_is_omap2430())
-		clk_enable(&sdrc_ick);
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 4f791866b910..d5980a9e09a4 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,13 +1,12 @@
 /*
- *  linux/arch/arm/mach-omap24xx/clock.h
+ *  linux/arch/arm/mach-omap2/clock.h
  *
- *  Copyright (C) 2005 Texas Instruments Inc.
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Created for OMAP2.
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
  *
- *  Copyright (C) 2004 Nokia corporation
- *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
- *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -17,2095 +16,53 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-static void omap2_sys_clk_recalc(struct clk * clk);
-static void omap2_clksel_recalc(struct clk * clk);
-static void omap2_followparent_recalc(struct clk * clk);
-static void omap2_propagate_rate(struct clk * clk);
-static void omap2_mpu_recalc(struct clk * clk);
-static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
-static void omap2_clk_disable(struct clk *clk);
-static void omap2_sys_clk_recalc(struct clk * clk);
-static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
-static u32 omap2_clksel_get_divisor(struct clk *clk);
-
-
-#define RATE_IN_242X	(1 << 0)
-#define RATE_IN_243X	(1 << 1)
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
-};
-
-/* Mask for clksel which support parent settign in set_rate */
-#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
-			CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
-
-/* Mask for clksel regs which support rate operations */
-#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
-			CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
-			CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
-			CM_SYSCLKOUT_SEL1)
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(6 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
-					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+#include <asm/arch/clock.h>
 
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
-					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #2	(ratio1) baseport-target
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13		(266 << 12)
-#define M5A_DPLL_DIV_13			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19		(180 << 12)
-#define M5A_DPLL_DIV_19			(12 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/*
- * #4	(ratio2)
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13			(330 << 12)
-#define M3_DPLL_DIV_13			(12 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19			(275 << 12)
-#define M3_DPLL_DIV_19			(15 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/*
- * These represent optimal values for common parts, it won't work for all.
- * As long as you scale down, most parameters are still work, they just
- * become sub-optimal. The RFR value goes in the opposite direction. If you
- * don't adjust it down as your clock period increases the refresh interval
- * will not be met. Setting all parameters for complete worst case may work,
- * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
- *
- * Only the FULL speed values are given. Current code is such that rate
- * changes must be made at DPLLoutx2. The actual value adjustment for low
- * frequency operation will be handled by omap_set_performance()
- *
- * By having the boot loader boot up in the fastest L4 speed available likely
- * will result in something which you can switch between.
- */
-#define V24XX_SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
-#define V24XX_SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
-#define V24XX_SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
-#define V24XX_SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S165M	165000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S330M	330000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S660M	660000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM #3 - ratio2 (ES2) - FAST */
-	{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #3 - ratio2 (ES2) - SLOW */
-	{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_110MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		V24XX_SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
-/*-------------------------------------------------------------------------
- * 24xx clock tree.
- *
- * NOTE:In many cases here we are assigning a 'default' parent.	In many
- *	cases the parent is selectable.	The get/set parent calls will also
- *	switch sources.
- *
- *	Many some clocks say always_enabled, but they can be auto idled for
- *	power savings. They will always be available upon clock request.
- *
- *	Several sources are given initial rates which may be wrong, this will
- *	be fixed up in the init func.
- *
- *	Things are broadly separated below by clock domains. It is
- *	noteworthy that most periferals have dependencies on multiple clock
- *	domains. Many get their interface clocks from the L4 domain, but get
- *	functional clocks from fixed sources or other core domain derived
- *	clocks.
- *-------------------------------------------------------------------------*/
-
-/* Base external input clocks */
-static struct clk func_32k_ck = {
-	.name		= "func_32k_ck",
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED,
-};
-
-/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
-static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
-	.name		= "osc_ck",
-	.rate		= 26000000,		/* fixed up in clock init */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-};
-
-/* With out modem likely 12MHz, with modem likely 13MHz */
-static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
-	.name		= "sys_ck",		/* ~ ref_clk also */
-	.parent		= &osc_ck,
-	.rate		= 13000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.rate_offset	= 6, /* sysclkdiv 1 or 2, already handled or no boot */
-	.recalc		= &omap2_sys_clk_recalc,
-};
-
-static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
-	.name		= "alt_ck",
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * Analog domain root source clocks
- */
-
-/* dpll_ck, is broken out in to special cases through clksel */
-static struct clk dpll_ck = {
-	.name		= "dpll_ck",
-	.parent		= &sys_ck,		/* Can be func_32k also */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk apll96_ck = {
-	.name		= "apll96_ck",
-	.parent		= &sys_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk apll54_ck = {
-	.name		= "apll54_ck",
-	.parent		= &sys_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0x6,
-	.recalc		= &omap2_propagate_rate,
-};
+int omap2_clk_enable(struct clk *clk);
+void omap2_clk_disable(struct clk *clk);
+long omap2_clk_round_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
+int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
 
-/*
- * PRCM digital base sources
- */
-static struct clk func_54m_ck = {
-	.name		= "func_54m_ck",
-	.parent		= &apll54_ck,	/* can also be alt_clk */
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 5,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.parent		= &dpll_ck,		/* can also be 32k */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				ALWAYS_ENABLED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk sleep_ck = {		/* sys_clk or 32k */
-	.name		= "sleep_ck",
-	.parent		= &func_32k_ck,
-	.rate		= 32000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_96m_ck = {
-	.name		= "func_96m_ck",
-	.parent		= &apll96_ck,
-	.rate		= 96000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_48m_ck = {
-	.name		= "func_48m_ck",
-	.parent		= &apll96_ck,	 /* 96M or Alt */
-	.rate		= 48000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
-	.src_offset	= 3,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-	.recalc		= &omap2_propagate_rate,
-};
-
-static struct clk func_12m_ck = {
-	.name		= "func_12m_ck",
-	.parent		= &func_48m_ck,
-	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.recalc		= &omap2_propagate_rate,
-	.enable_reg	= (void __iomem *)&CM_CLKEN_PLL,
-	.enable_bit	= 0xff,
-};
-
-/* Secure timer, only available in secure mode */
-static struct clk wdt1_osc_ck = {
-	.name		= "ck_wdt1_osc",
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sys_clkout = {
-	.name		= "sys_clkout",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 0,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 7,
-	.rate_offset	= 3,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* In 2430, new in 2420 ES2 */
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
-	.src_offset	= 8,
-	.enable_reg	= (void __iomem *)&PRCM_CLKOUT_CTRL,
-	.enable_bit	= 15,
-	.rate_offset	= 11,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk emul_ck = {
-	.name		= "emul_ck",
-	.parent		= &func_54m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&PRCM_CLKEMUL_CTRL,
-	.enable_bit	= 0,
-	.recalc		= &omap2_propagate_rate,
-
-};
-
-/*
- * MPU clock domain
- *	Clocks:
- *		MPU_FCLK, MPU_ICLK
- *		INT_M_FCLK, INT_M_I_CLK
- *
- * - Individual clocks are hardware managed.
- * - Base divider comes from: CM_CLKSEL_MPU
- *
- */
-static struct clk mpu_ck = {	/* Control cpu */
-	.name		= "mpu_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
-				ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,	/* bits 0-4 */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
- * Clocks:
- *	2430: IVA2.1_FCLK, IVA2.1_ICLK
- *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
- */
-static struct clk iva2_1_fck = {
-	.name		= "iva2_1_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES |
-				CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_1_ick = {
-	.name		= "iva2_1_ick",
-	.parent		= &iva2_1_fck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * Won't be too specific here. The core clock comes into this block
- * it is divided then tee'ed. One branch goes directly to xyz enable
- * controls. The other branch gets further divided by 2 then possibly
- * routed into a synchronizer and out of clocks abc.
- */
-static struct clk dsp_fck = {
-	.name		= "dsp_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-			DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dsp_ick = {
-	.name		= "dsp_ick",	 /* apparently ipi and isp */
-	.parent		= &dsp_fck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset = 5,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_DSP,
-	.enable_bit	= 1,		/* for ipi */
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva1_ifck = {
-	.name		= "iva1_ifck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
-			CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
-	.rate_offset= 8,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 10,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* IVA1 mpu/int/i/f clocks are /2 of parent */
-static struct clk iva1_mpu_int_ifck = {
-	.name		= "iva1_mpu_int_ifck",
-	.parent		= &iva1_ifck,
-	.flags		= CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_DSP,
-	.enable_bit	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * L3 clock domain
- * L3 clocks are used for both interface and functional clocks to
- * multiple entities. Some of these clocks are completely managed
- * by hardware, and some others allow software control. Hardware
- * managed ones general are based on directly CLK_REQ signals and
- * various auto idle settings. The functional spec sets many of these
- * as 'tie-high' for their enables.
- *
- * I-CLOCKS:
- *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
- *	CAM, HS-USB.
- * F-CLOCK
- *	SSI.
- *
- * GPMC memories and SDRC have timing and clock sensitive registers which
- * may very well need notification when the clock changes. Currently for low
- * operating points, these are taken care of in sleep.S.
- */
-static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
-	.name		= "core_l3_ck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT |
-				RATE_PROPAGATES,
-	.rate_offset	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk usb_l4_ick = {	/* FS-USB interface clock */
-	.name		= "usb_l4_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
-				CONFIG_PARTICIPANT,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 0,
-	.rate_offset = 25,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * SSI is in L3 management domain, its direct parent is core not l3,
- * many core power domain entities are grouped into the L3 clock
- * domain.
- * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
- *
- * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
- */
-static struct clk ssi_ssr_sst_fck = {
-	.name		= "ssi_fck",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.rate_offset = 20,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * GFX clock domain
- *	Clocks:
- * GFX_FCLK, GFX_ICLK
- * GFX_CG1(2d), GFX_CG2(3d)
- *
- * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
- * The 2d and 3d clocks run at a hardware determined
- * divided value of fclk.
- *
- */
-static struct clk gfx_3d_fck = {
-	.name		= "gfx_3d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 2,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_2d_fck = {
-	.name		= "gfx_2d_fck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_GFX_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_GFX,
-	.enable_bit	= 1,
-	.rate_offset= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_ick = {
-	.name		= "gfx_ick",		/* From l3 */
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_GFX,	/* bit 0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * Modem clock domain (2430)
- *	CLOCKS:
- *		MDM_OSC_CLK
- *		MDM_ICLK
- */
-static struct clk mdm_ick = {		/* used both as a ick and fck */
-	.name		= "mdm_ick",
-	.parent		= &core_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
-				DELAYED_APP | CONFIG_PARTICIPANT,
-	.rate_offset	= 0,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_MDM,
-	.enable_bit	= 0,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mdm_osc_ck = {
-	.name		= "mdm_osc_ck",
-	.rate		= 26000000,
-	.parent		= &osc_ck,
-	.flags		= CLOCK_IN_OMAP243X | RATE_FIXED,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_MDM,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * L4 clock management domain
- *
- * This domain contains lots of interface clocks from the L4 interface, some
- * functional clocks.	Fixed APLL functional source clocks are managed in
- * this domain.
- */
-static struct clk l4_ck = {		/* used both as an ick and fck */
-	.name		= "l4_ck",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
-				DELAYED_APP | RATE_PROPAGATES,
-	.rate_offset	= 5,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,	/* bit 1 */
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-/*
- * DSS clock domain
- * CLOCKs:
- * DSS_L4_ICLK, DSS_L3_ICLK,
- * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
- *
- * DSS is both initiator and target.
- */
-static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
-	.name		= "dss_ick",
-	.parent		= &l4_ck,	/* really both l3 and l4 */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss1_fck = {
-	.name		= "dss1_fck",
-	.parent		= &core_ck,		/* Core or sys */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 0,
-	.rate_offset	= 8,
-	.src_offset	= 8,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk dss2_fck = {		/* Alt clk used in power management */
-	.name		= "dss2_fck",
-	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED |
-				DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 1,
-	.src_offset	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk dss_54m_fck = {	/* Alt clk used in power management */
-	.name		= "dss_54m_fck",	/* 54m tv clk */
-	.parent		= &func_54m_ck,
-	.rate		= 54000000,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				RATE_FIXED | RATE_PROPAGATES,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_propagate_rate,
-};
-
-/*
- * CORE power domain ICLK & FCLK defines.
- * Many of the these can have more than one possible parent. Entries
- * here will likely have an L4 interface parent, and may have multiple
- * functional clock parents.
- */
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_WKUP_SEL1,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,	/* Bit0 */
-	.enable_bit	= 0,
-	.src_offset	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit4 */
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 4,
-	.src_offset	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit5 */
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 5,
-	.src_offset	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit6 */
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 6,
-	.src_offset	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* Bit7 */
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 7,
-	.src_offset	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 8,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit8 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 8,
-	.src_offset	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit9 */
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 9,
-	.src_offset	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit10 */
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 10,
-	.src_offset	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 11,
-	.src_offset	= 16,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 12,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 12,
-	.src_offset	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 13,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 13,
-	.src_offset	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit14 */
-	.enable_bit	= 14,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-					CM_CORE_SEL2,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 14,
-	.src_offset	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	 /* bit16 */
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 15,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_bit	= 16,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp3_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp4_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp5_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.id		= 1,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.id		= 2,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 18,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.id		= 3,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.id		= 3,
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 9,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 21,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 22,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_ick = {
-	.name		= "gpios_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk gpios_fck = {
-	.name		= "gpios_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_ick = {
-	.name		= "mpu_wdt_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mpu_wdt_fck = {
-	.name		= "mpu_wdt_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN_WKUP,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sync_32k_ick = {
-	.name		= "sync_32k_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 5,
-	.recalc		= &omap2_followparent_recalc,
-};
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN_WKUP,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	.name		= "cam_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk cam_fck = {
-	.name		= "cam_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 31,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 30,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_ick = {
-	.name		= "wdt4_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt4_fck = {
-	.name		= "wdt4_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 29,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 28,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 27,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_ick = {
-	.name		= "mmc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmc_fck = {
-	.name		= "mmc_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 26,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk fac_fck = {
-	.name		= "fac_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 25,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_ick = {
-	.name		= "eac_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk eac_fck = {
-	.name		= "eac_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 24,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 23,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.id		= 2,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.id		= 2,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs2_fck = {
-	.name		= "i2chs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 20,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.parent		= &func_12m_ck,
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk i2chs1_fck = {
-	.name		= "i2chs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 19,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_ick = {
-	.name		= "vlynq_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk vlynq_fck = {
-	.name		= "vlynq_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP242X  | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN1_CORE,
-	.enable_bit	= 3,
-	.src_offset	= 15,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN3_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk des_ick = {
-	.name		= "des_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk sha_ick = {
-	.name		= "sha_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 1,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 2,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk aes_ick = {
-	.name		= "aes_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 3,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN4_CORE,
-	.enable_bit	= 4,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usb_fck = {
-	.name		= "usb_fck",
-	.parent		= &func_48m_ck,
-	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 0,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk usbhs_ick = {
-	.name		= "usbhs_ick",
-	.parent		= &core_l3_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 6,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs1_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs1_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 7,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs2_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs2_fck",
-	.parent		= &func_96m_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 8,
-	.recalc		= &omap2_followparent_recalc,
-};
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+void omap2_clk_disable_unused(struct clk *clk);
+#else
+#define omap2_clk_disable_unused	NULL
+#endif
 
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
+void omap2_clksel_recalc(struct clk *clk);
+void omap2_init_clksel_parent(struct clk *clk);
+u32 omap2_clksel_get_divisor(struct clk *clk);
+u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate,
+				u32 *new_div);
+u32 omap2_clksel_to_divisor(struct clk *clk, u32 field_val);
+u32 omap2_divisor_to_clksel(struct clk *clk, u32 div);
+void omap2_fixed_divisor_recalc(struct clk *clk);
+long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
+int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
+u32 omap2_get_dpll_rate(struct clk *clk);
+int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 
-static struct clk gpio5_fck = {
-	.name		= "gpio5_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 10,
-	.recalc		= &omap2_followparent_recalc,
-};
+extern u8 cpu_mask;
 
-static struct clk mdm_intc_ick = {
-	.name		= "mdm_intc_ick",
-	.parent		= &l4_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_ICLKEN2_CORE,
-	.enable_bit	= 11,
-	.recalc		= &omap2_followparent_recalc,
+/* clksel_rate data common to 24xx/343x */
+static const struct clksel_rate gpt_32k_rates[] = {
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-static struct clk mmchsdb1_fck = {
-	.name		= "mmchsdb1_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 16,
-	.recalc		= &omap2_followparent_recalc,
+static const struct clksel_rate gpt_sys_rates[] = {
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
 };
 
-static struct clk mmchsdb2_fck = {
-	.name		= "mmchsdb2_fck",
-	.parent		= &func_32k_ck,
-	.flags		= CLOCK_IN_OMAP243X,
-	.enable_reg	= (void __iomem *)&CM_FCLKEN2_CORE,
-	.enable_bit	= 17,
-	.recalc		= &omap2_followparent_recalc,
+static const struct clksel_rate gfx_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 0 }
 };
 
-/*
- * This clock is a composite clock which does entire set changes then
- * forces a rebalance. It keys on the MPU speed, but it really could
- * be any key speed part of a set in the rate table.
- *
- * to really change a set, you need memory table sets which get changed
- * in sram, pre-notifiers & post notifiers, changing the top set, without
- * having low level display recalc's won't work... this is why dpm notifiers
- * work, isr's off, walk a list of clocks already _off_ and not messing with
- * the bus.
- *
- * This clock should have no parent. It embodies the entire upper level
- * active set. A parent will mess up some of the init also.
- */
-static struct clk virt_prcm_set = {
-	.name		= "virt_prcm_set",
-	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
-				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
-	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
-	.recalc		= &omap2_mpu_recalc,	/* sets are keyed on mpu rate */
-	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
-};
-
-static struct clk *onchip_clks[] = {
-	/* external root sources */
-	&func_32k_ck,
-	&osc_ck,
-	&sys_ck,
-	&alt_ck,
-	/* internal analog sources */
-	&dpll_ck,
-	&apll96_ck,
-	&apll54_ck,
-	/* internal prcm root sources */
-	&func_54m_ck,
-	&core_ck,
-	&sleep_ck,
-	&func_96m_ck,
-	&func_48m_ck,
-	&func_12m_ck,
-	&wdt1_osc_ck,
-	&sys_clkout,
-	&sys_clkout2,
-	&emul_ck,
-	/* mpu domain clocks */
-	&mpu_ck,
-	/* dsp domain clocks */
-	&iva2_1_fck,		/* 2430 */
-	&iva2_1_ick,
-	&dsp_ick,		/* 2420 */
-	&dsp_fck,
-	&iva1_ifck,
-	&iva1_mpu_int_ifck,
-	/* GFX domain clocks */
-	&gfx_3d_fck,
-	&gfx_2d_fck,
-	&gfx_ick,
-	/* Modem domain clocks */
-	&mdm_ick,
-	&mdm_osc_ck,
-	/* DSS domain clocks */
-	&dss_ick,
-	&dss1_fck,
-	&dss2_fck,
-	&dss_54m_fck,
-	/* L3 domain clocks */
-	&core_l3_ck,
-	&ssi_ssr_sst_fck,
-	&usb_l4_ick,
-	/* L4 domain clocks */
-	&l4_ck,			/* used as both core_l4 and wu_l4 */
-	&ssi_l4_ick,
-	/* virtual meta-group clock */
-	&virt_prcm_set,
-	/* general l4 interface ck, multi-parent functional clk */
-	&gpt1_ick,
-	&gpt1_fck,
-	&gpt2_ick,
-	&gpt2_fck,
-	&gpt3_ick,
-	&gpt3_fck,
-	&gpt4_ick,
-	&gpt4_fck,
-	&gpt5_ick,
-	&gpt5_fck,
-	&gpt6_ick,
-	&gpt6_fck,
-	&gpt7_ick,
-	&gpt7_fck,
-	&gpt8_ick,
-	&gpt8_fck,
-	&gpt9_ick,
-	&gpt9_fck,
-	&gpt10_ick,
-	&gpt10_fck,
-	&gpt11_ick,
-	&gpt11_fck,
-	&gpt12_ick,
-	&gpt12_fck,
-	&mcbsp1_ick,
-	&mcbsp1_fck,
-	&mcbsp2_ick,
-	&mcbsp2_fck,
-	&mcbsp3_ick,
-	&mcbsp3_fck,
-	&mcbsp4_ick,
-	&mcbsp4_fck,
-	&mcbsp5_ick,
-	&mcbsp5_fck,
-	&mcspi1_ick,
-	&mcspi1_fck,
-	&mcspi2_ick,
-	&mcspi2_fck,
-	&mcspi3_ick,
-	&mcspi3_fck,
-	&uart1_ick,
-	&uart1_fck,
-	&uart2_ick,
-	&uart2_fck,
-	&uart3_ick,
-	&uart3_fck,
-	&gpios_ick,
-	&gpios_fck,
-	&mpu_wdt_ick,
-	&mpu_wdt_fck,
-	&sync_32k_ick,
-	&wdt1_ick,
-	&omapctrl_ick,
-	&icr_ick,
-	&cam_fck,
-	&cam_ick,
-	&mailboxes_ick,
-	&wdt4_ick,
-	&wdt4_fck,
-	&wdt3_ick,
-	&wdt3_fck,
-	&mspro_ick,
-	&mspro_fck,
-	&mmc_ick,
-	&mmc_fck,
-	&fac_ick,
-	&fac_fck,
-	&eac_ick,
-	&eac_fck,
-	&hdq_ick,
-	&hdq_fck,
-	&i2c1_ick,
-	&i2c1_fck,
-	&i2chs1_fck,
-	&i2c2_ick,
-	&i2c2_fck,
-	&i2chs2_fck,
-	&vlynq_ick,
-	&vlynq_fck,
-	&sdrc_ick,
-	&des_ick,
-	&sha_ick,
-	&rng_ick,
-	&aes_ick,
-	&pka_ick,
-	&usb_fck,
-	&usbhs_ick,
-	&mmchs1_ick,
-	&mmchs1_fck,
-	&mmchs2_ick,
-	&mmchs2_fck,
-	&gpio5_ick,
-	&gpio5_fck,
-	&mdm_intc_ick,
-	&mmchsdb1_fck,
-	&mmchsdb2_fck,
-};
 
 #endif
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
new file mode 100644
index 000000000000..ece32d8acba4
--- /dev/null
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -0,0 +1,539 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ *  Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/div64.h>
+#include <asm/bitops.h>
+
+#include "memory.h"
+#include "clock.h"
+#include "clock24xx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+static struct prcm_config *curr_prcm_set;
+static struct clk *vclk;
+static struct clk *sclk;
+
+/*-------------------------------------------------------------------------
+ * Omap24xx specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/* This actually returns the rate of core_ck, not dpll_ck. */
+static u32 omap2_get_dpll_rate_24xx(struct clk *tclk)
+{
+	long long dpll_clk;
+	u8 amult;
+
+	dpll_clk = omap2_get_dpll_rate(tclk);
+
+	amult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	amult &= OMAP24XX_CORE_CLK_SRC_MASK;
+	dpll_clk *= amult;
+
+	return dpll_clk;
+}
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
+		      OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
+		      OMAP24XX_PRCM_CLKSRC_CTRL);
+}
+
+#ifdef OLD_CK
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk * clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+#endif	/* OLD_CK */
+
+/* Enable an APLL if off */
+static int omap2_clk_fixed_enable(struct clk *clk)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	if (clk == &apll96_ck)
+		cval = OMAP24XX_ST_96M_APLL;
+	else if (clk == &apll54_ck)
+		cval = OMAP24XX_ST_54M_APLL;
+
+	omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+			    clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+/* Stop APLL */
+static void omap2_clk_fixed_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+static u32 omap2_dpll_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+static void omap2_dpll_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_dpll_rate_24xx(clk);
+
+	propagate_rate(clk);
+}
+
+static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+	unsigned long flags;
+	int ret = -EINVAL;
+
+	local_irq_save(flags);
+	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpll_round_rate(rate);
+		if (valid_rate != rate)
+			goto dpll_exit;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			goto dpll_exit;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1); /* For init_mem */
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+	}
+	omap2_dpll_recalc(&dpll_ck);
+	ret = 0;
+
+dpll_exit:
+	local_irq_restore(flags);
+	return(ret);
+}
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+static void omap2_table_mpu_recalc(struct clk *clk)
+{
+	clk->rate = curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	struct prcm_config *ptr;
+	long highest_rate;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sys_ck.rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+
+	if (clk != &virt_prcm_set)
+		return -EINVAL;
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2_get_dpll_rate_24xx(&dpll_ck);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, CM_CLKSEL1);
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter init_mem */
+		omap2_reprogram_sdrc(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2_init_memory_params(omap2_dll_force_needed());
+		omap2_reprogram_sdrc(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+	omap2_dpll_recalc(&dpll_ck);
+
+	return 0;
+}
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+static u32 omap2_get_apll_clkin(void)
+{
+	u32 aplls, sclk = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		sclk = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		sclk = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		sclk = 12000000;
+
+	return sclk;
+}
+
+static u32 omap2_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+static void omap2_osc_clk_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+	propagate_rate(clk);
+}
+
+static void omap2_sys_clk_recalc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / omap2_get_sysclkdiv();
+	propagate_rate(clk);
+}
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+}
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	struct prcm_config *prcm;
+	struct clk **clkp;
+	u32 clkrate;
+
+	if (cpu_is_omap242x())
+		cpu_mask = RATE_IN_242X;
+	else if (cpu_is_omap2430())
+		cpu_mask = RATE_IN_243X;
+
+	clk_init(&omap2_clk_functions);
+
+	omap2_osc_clk_recalc(&osc_ck);
+	omap2_sys_clk_recalc(&sys_ck);
+
+	for (clkp = onchip_24xx_clks;
+	     clkp < onchip_24xx_clks + ARRAY_SIZE(onchip_24xx_clks);
+	     clkp++) {
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP242X && cpu_is_omap2420()) {
+			clk_register(*clkp);
+			continue;
+		}
+
+		if ((*clkp)->flags & CLOCK_IN_OMAP243X && cpu_is_omap2430()) {
+			clk_register(*clkp);
+			continue;
+		}
+	}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
new file mode 100644
index 000000000000..88081ed13f96
--- /dev/null
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -0,0 +1,2643 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock24xx.h
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+
+#include "clock.h"
+
+#include "prm.h"
+#include "cm.h"
+#include "prm-regbits-24xx.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+
+static void omap2_table_mpu_recalc(struct clk *clk);
+static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
+static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
+static void omap2_sys_clk_recalc(struct clk *clk);
+static void omap2_osc_clk_recalc(struct clk *clk);
+static void omap2_sys_clk_recalc(struct clk *clk);
+static void omap2_dpll_recalc(struct clk *clk);
+static int omap2_clk_fixed_enable(struct clk *clk);
+static void omap2_clk_fixed_disable(struct clk *clk);
+static int omap2_enable_osc_ck(struct clk *clk);
+static void omap2_disable_osc_ck(struct clk *clk);
+static int omap2_reprogram_dpll(struct clk *clk, unsigned long rate);
+
+/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+/*
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ */
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R1_CLKSEL_L4 | R1_CLKSEL_L3
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					R2_CLKSEL_L4 | R2_CLKSEL_L3
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RB_CLKSEL_L4 | RB_CLKSEL_L3
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					RIII_CLKSEL_L3
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					RIII_CLKSEL_DSP
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RII_CLKSEL_L4 | RII_CLKSEL_L3
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					RII_CLKSEL_DSP
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
+#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
+#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL		RI_CLKSEL_USB | \
+					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					RI_CLKSEL_L4 | RI_CLKSEL_L3
+#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
+#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
+#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
+#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL		RI_SYNC_IVA | RI_CLKSEL_IVA | \
+					RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+					RI_CLKSEL_DSP
+#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
+					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
+					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5A_DPLL_MULT_13		(61 << 12)
+#define M5A_DPLL_DIV_13			(2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5A_DPLL_MULT_19		(55 << 12)
+#define M5A_DPLL_DIV_19			(3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+/*
+ * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12			(133 << 12)
+#define M4_DPLL_DIV_12			(3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+#define M4_DPLL_MULT_13			(399 << 12)
+#define M4_DPLL_DIV_13			(12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+#define M4_DPLL_MULT_19			(145 << 12)
+#define M4_DPLL_DIV_19			(6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/*
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define M3_DPLL_MULT_13			(76 << 12)
+#define M3_DPLL_DIV_13			(2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+#define M3_DPLL_MULT_19			(17 << 12)
+#define M3_DPLL_DIV_19			(0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/*
+ * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12		        (55 << 12)
+#define M2_DPLL_DIV_12		        (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13		        (76 << 12)
+#define M2_DPLL_DIV_13		        (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+#define M2_DPLL_MULT_19		        (17 << 12)
+#define M2_DPLL_DIV_19		        (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
+					M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+					MX_APLLS_CLIKIN_19_2
+
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
+					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12			(55 << 12)
+#define MI_DPLL_DIV_12			(1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
+					MX_APLLS_CLIKIN_12
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
+					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
+					MX_APLLS_CLIKIN_13
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S164M	164000000
+#define S165M	165000000
+#define S199M	199000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S329M	329000000
+#define S330M	330000000
+#define S399M	399000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S658M	658000000
+#define S660M	660000000
+#define S798M	798000000
+
+/*-------------------------------------------------------------------------
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards and 2430-SDPs variants available.
+ * There are quite a few more rates combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose the
+ * fastest one. If a 'fast' value is defined, then automatically, the /2
+ * one should be included as it can be used.	Generally having more that
+ * one fast set does not make sense, as static timings need to be changed
+ * to change the set.	 The exception is the bypass setting which is
+ * availble for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ *-------------------------------------------------------------------------*/
+static struct prcm_config rate_table[] = {
+	/* PRCM I - FAST */
+	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
+		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM #4 - ratio2 (ES2.1) - FAST */
+	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - FAST */
+	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
+	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - SLOW */
+	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
+
+/*-------------------------------------------------------------------------
+ * 24xx clock tree.
+ *
+ * NOTE:In many cases here we are assigning a 'default' parent.	In many
+ *	cases the parent is selectable.	The get/set parent calls will also
+ *	switch sources.
+ *
+ *	Many some clocks say always_enabled, but they can be auto idled for
+ *	power savings. They will always be available upon clock request.
+ *
+ *	Several sources are given initial rates which may be wrong, this will
+ *	be fixed up in the init func.
+ *
+ *	Things are broadly separated below by clock domains. It is
+ *	noteworthy that most periferals have dependencies on multiple clock
+ *	domains. Many get their interface clocks from the L4 domain, but get
+ *	functional clocks from fixed sources or other core domain derived
+ *	clocks.
+ *-------------------------------------------------------------------------*/
+
+/* Base external input clocks */
+static struct clk func_32k_ck = {
+	.name		= "func_32k_ck",
+	.rate		= 32000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &propagate_rate,
+};
+
+/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
+static struct clk osc_ck = {		/* (*12, *13, 19.2, *26, 38.4)MHz */
+	.name		= "osc_ck",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES,
+	.enable		= &omap2_enable_osc_ck,
+	.disable	= &omap2_disable_osc_ck,
+	.recalc		= &omap2_osc_clk_recalc,
+};
+
+/* With out modem likely 12MHz, with modem likely 13MHz */
+static struct clk sys_ck = {		/* (*12, *13, 19.2, 26, 38.4)MHz */
+	.name		= "sys_ck",		/* ~ ref_clk also */
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &omap2_sys_clk_recalc,
+};
+
+static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
+	.name		= "alt_ck",
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &propagate_rate,
+};
+
+/*
+ * Analog domain root source clocks
+ */
+
+/* dpll_ck, is broken out in to special cases through clksel */
+/* REVISIT: Rate changes on dpll_ck trigger a full set change.	...
+ * deal with this
+ */
+
+static const struct dpll_data dpll_dd = {
+	.mult_div1_reg		= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask		= OMAP24XX_DPLL_MULT_MASK,
+	.div1_mask		= OMAP24XX_DPLL_DIV_MASK,
+};
+
+static struct clk dpll_ck = {
+	.name		= "dpll_ck",
+	.parent		= &sys_ck,		/* Can be func_32k also */
+	.dpll_data	= &dpll_dd,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_dpll_recalc,
+	.set_rate	= &omap2_reprogram_dpll,
+};
+
+static struct clk apll96_ck = {
+	.name		= "apll96_ck",
+	.parent		= &sys_ck,
+	.rate		= 96000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_96M_PLL_SHIFT,
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk apll54_ck = {
+	.name		= "apll54_ck",
+	.parent		= &sys_ck,
+	.rate		= 54000000,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_FIXED | RATE_PROPAGATES | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP24XX_EN_54M_PLL_SHIFT,
+	.enable		= &omap2_clk_fixed_enable,
+	.disable	= &omap2_clk_fixed_disable,
+	.recalc		= &propagate_rate,
+};
+
+/*
+ * PRCM digital base sources
+ */
+
+/* func_54m_ck */
+
+static const struct clksel_rate func_54m_apll54_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_54m_clksel[] = {
+	{ .parent = &apll54_ck, .rates = func_54m_apll54_rates, },
+	{ .parent = &alt_ck,	.rates = func_54m_alt_rates, },
+	{ .parent = NULL },
+};
+
+static struct clk func_54m_ck = {
+	.name		= "func_54m_ck",
+	.parent		= &apll54_ck,	/* can also be alt_clk */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_54M_SOURCE,
+	.clksel		= func_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.parent		= &dpll_ck,		/* can also be 32k */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+/* func_96m_ck */
+static const struct clksel_rate func_96m_apll96_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_96m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_96m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_96m_apll96_rates },
+	{ .parent = &alt_ck,	.rates = func_96m_alt_rates },
+	{ .parent = NULL }
+};
+
+/* The parent of this clock is not selectable on 2420. */
+static struct clk func_96m_ck = {
+	.name		= "func_96m_ck",
+	.parent		= &apll96_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2430_96M_SOURCE,
+	.clksel		= func_96m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* func_48m_ck */
+
+static const struct clksel_rate func_48m_apll96_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate func_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_clksel[] = {
+	{ .parent = &apll96_ck,	.rates = func_48m_apll96_rates },
+	{ .parent = &alt_ck, .rates = func_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk func_48m_ck = {
+	.name		= "func_48m_ck",
+	.parent		= &apll96_ck,	 /* 96M or Alt */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_48M_SOURCE,
+	.clksel		= func_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk func_12m_ck = {
+	.name		= "func_12m_ck",
+	.parent		= &func_48m_ck,
+	.fixed_div	= 4,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* Secure timer, only available in secure mode */
+static struct clk wdt1_osc_ck = {
+	.name		= "ck_wdt1_osc",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * The common_clkout* clksel_rate structs are common to
+ * sys_clkout, sys_clkout_src, sys_clkout2, and sys_clkout2_src.
+ * sys_clkout2_* are 2420-only, so the
+ * clksel_rate flags fields are inaccurate for those clocks. This is
+ * harmless since access to those clocks are gated by the struct clk
+ * flags fields, which mark them as 2420-only.
+ */
+static const struct clksel_rate common_clkout_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_clkout_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel common_clkout_src_clksel[] = {
+	{ .parent = &core_ck,	  .rates = common_clkout_src_core_rates },
+	{ .parent = &sys_ck,	  .rates = common_clkout_src_sys_rates },
+	{ .parent = &func_96m_ck, .rates = common_clkout_src_96m_rates },
+	{ .parent = &func_54m_ck, .rates = common_clkout_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout_src = {
+	.name		= "sys_clkout_src",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				RATE_PROPAGATES,
+	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP24XX_CLKOUT_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate common_clkout_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout_clksel[] = {
+	{ .parent = &sys_clkout_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+static struct clk sys_clkout = {
+	.name		= "sys_clkout",
+	.parent		= &sys_clkout_src,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP24XX_CLKOUT_DIV_MASK,
+	.clksel		= sys_clkout_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2_src = {
+	.name		= "sys_clkout2_src",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | RATE_PROPAGATES,
+	.enable_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.enable_bit	= OMAP2420_CLKOUT2_EN_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_SOURCE_MASK,
+	.clksel		= common_clkout_src_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &sys_clkout2_src, .rates = common_clkout_rates },
+	{ .parent = NULL }
+};
+
+/* In 2430, new in 2420 ES2 */
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.parent		= &sys_clkout2_src,
+	.flags		= CLOCK_IN_OMAP242X | PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP24XX_PRCM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP2420_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk emul_ck = {
+	.name		= "emul_ck",
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP24XX_PRCM_CLKEMUL_CTRL,
+	.enable_bit	= OMAP24XX_EMULATION_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+
+};
+
+/*
+ * MPU clock domain
+ *	Clocks:
+ *		MPU_FCLK, MPU_ICLK
+ *		INT_M_FCLK, INT_M_I_CLK
+ *
+ * - Individual clocks are hardware managed.
+ * - Base divider comes from: CM_CLKSEL_MPU
+ *
+ */
+static const struct clksel_rate mpu_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &core_ck, .rates = mpu_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {	/* Control cpu */
+	.name		= "mpu_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_MPU_MASK,
+	.clksel		= mpu_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate     = &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
+ * Clocks:
+ *	2430: IVA2.1_FCLK (really just DSP_FCLK), IVA2.1_ICLK
+ *	2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
+ *
+ * Won't be too specific here. The core clock comes into this block
+ * it is divided then tee'ed. One branch goes directly to xyz enable
+ * controls. The other branch gets further divided by 2 then possibly
+ * routed into a synchronizer and out of clocks abc.
+ */
+static const struct clksel_rate dsp_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = dsp_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dsp_fck = {
+	.name		= "dsp_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* DSP interface clock */
+static const struct clksel_rate dsp_irate_ick_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X },
+	{ .div = 0 },
+};
+
+static const struct clksel dsp_irate_ick_clksel[] = {
+	{ .parent = &dsp_fck, .rates = dsp_irate_ick_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * This clock does not exist as such in the TRM, but is added to
+ * separate source selection from  XXX
+ */
+static struct clk dsp_irate_ick = {
+	.name		= "dsp_irate_ick",
+	.parent		= &dsp_fck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | DELAYED_APP |
+				CONFIG_PARTICIPANT | PARENT_CONTROLS_CLOCK,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSP_IF_MASK,
+	.clksel		= dsp_irate_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	      = &omap2_clksel_set_rate
+};
+
+/* 2420 only */
+static struct clk dsp_ick = {
+	.name		= "dsp_ick",	 /* apparently ipi and isp */
+	.parent		= &dsp_irate_ick,
+	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2420_EN_DSP_IPI_SHIFT,	      /* for ipi */
+};
+
+/* 2430 only - EN_DSP controls both dsp fclk and iclk on 2430 */
+static struct clk iva2_1_ick = {
+	.name		= "iva2_1_ick",
+	.parent		= &dsp_irate_ick,
+	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT,
+};
+
+static struct clk iva1_ifck = {
+	.name		= "iva1_ifck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CONFIG_PARTICIPANT |
+				RATE_PROPAGATES | DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_COP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2420_CLKSEL_IVA_MASK,
+	.clksel		= dsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* IVA1 mpu/int/i/f clocks are /2 of parent */
+static struct clk iva1_mpu_int_ifck = {
+	.name		= "iva1_mpu_int_ifck",
+	.parent		= &iva1_ifck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP24XX_DSP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2420_EN_IVA_MPU_SHIFT,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/*
+ * L3 clock domain
+ * L3 clocks are used for both interface and functional clocks to
+ * multiple entities. Some of these clocks are completely managed
+ * by hardware, and some others allow software control. Hardware
+ * managed ones general are based on directly CLK_REQ signals and
+ * various auto idle settings. The functional spec sets many of these
+ * as 'tie-high' for their enables.
+ *
+ * I-CLOCKS:
+ *	L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
+ *	CAM, HS-USB.
+ * F-CLOCK
+ *	SSI.
+ *
+ * GPMC memories and SDRC have timing and clock sensitive registers which
+ * may very well need notification when the clock changes. Currently for low
+ * operating points, these are taken care of in sleep.S.
+ */
+static const struct clksel_rate core_l3_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel core_l3_clksel[] = {
+	{ .parent = &core_ck, .rates = core_l3_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_l3_ck = {	/* Used for ick and fck, interconnect */
+	.name		= "core_l3_ck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP |
+				CONFIG_PARTICIPANT | RATE_PROPAGATES,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L3_MASK,
+	.clksel		= core_l3_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/* usb_l4_ick */
+static const struct clksel_rate usb_l4_ick_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel usb_l4_ick_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = usb_l4_ick_core_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {	/* FS-USB interface clock */
+	.name		= "usb_l4_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_USB_MASK,
+	.clksel		= usb_l4_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * SSI is in L3 management domain, its direct parent is core not l3,
+ * many core power domain entities are grouped into the L3 clock
+ * domain.
+ * SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
+ *
+ * ssr = core/1/2/3/4/5, sst = 1/2 ssr.
+ */
+static const struct clksel_rate ssi_ssr_sst_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_243X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_sst_fck_clksel[] = {
+	{ .parent = &core_ck, .rates = ssi_ssr_sst_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_sst_fck = {
+	.name		= "ssi_fck",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_sst_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+/*
+ * GFX clock domain
+ *	Clocks:
+ * GFX_FCLK, GFX_ICLK
+ * GFX_CG1(2d), GFX_CG2(3d)
+ *
+ * GFX_FCLK runs from L3, and is divided by (1,2,3,4)
+ * The 2d and 3d clocks run at a hardware determined
+ * divided value of fclk.
+ *
+ */
+/* XXX REVISIT: GFX clock is part of CONFIG_PARTICIPANT, no? doublecheck. */
+
+/* This clksel struct is shared between gfx_3d_fck and gfx_2d_fck */
+static const struct clksel gfx_fck_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = gfx_l3_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gfx_3d_fck = {
+	.name		= "gfx_3d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_3D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_2d_fck = {
+	.name		= "gfx_2d_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_2D_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gfx_ick = {
+	.name		= "gfx_ick",		/* From l3 */
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * Modem clock domain (2430)
+ *	CLOCKS:
+ *		MDM_OSC_CLK
+ *		MDM_ICLK
+ * These clocks are usable in chassis mode only.
+ */
+static const struct clksel_rate mdm_ick_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_243X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | DEFAULT_RATE },
+	{ .div = 6, .val = 6, .flags = RATE_IN_243X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_243X },
+	{ .div = 0 }
+};
+
+static const struct clksel mdm_ick_clksel[] = {
+	{ .parent = &core_ck, .rates = mdm_ick_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mdm_ick = {		/* used both as a ick and fck */
+	.name		= "mdm_ick",
+	.parent		= &core_ck,
+	.flags		= CLOCK_IN_OMAP243X | DELAYED_APP | CONFIG_PARTICIPANT,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP2430_CLKSEL_MDM_MASK,
+	.clksel		= mdm_ick_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk mdm_osc_ck = {
+	.name		= "mdm_osc_ck",
+	.parent		= &osc_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP2430_MDM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP2430_EN_OSC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * L4 clock management domain
+ *
+ * This domain contains lots of interface clocks from the L4 interface, some
+ * functional clocks.	Fixed APLL functional source clocks are managed in
+ * this domain.
+ */
+static const struct clksel_rate l4_core_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel l4_clksel[] = {
+	{ .parent = &core_l3_ck, .rates = l4_core_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ck = {		/* used both as an ick and fck */
+	.name		= "l4_ck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				ALWAYS_ENABLED | DELAYED_APP | RATE_PROPAGATES,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_L4_MASK,
+	.clksel		= l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_SSI_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * DSS clock domain
+ * CLOCKs:
+ * DSS_L4_ICLK, DSS_L3_ICLK,
+ * DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
+ *
+ * DSS is both initiator and target.
+ */
+/* XXX Add RATE_NOT_VALIDATED */
+
+static const struct clksel_rate dss1_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss1_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX },
+	{ .div = 3, .val = 3, .flags = RATE_IN_24XX },
+	{ .div = 4, .val = 4, .flags = RATE_IN_24XX },
+	{ .div = 5, .val = 5, .flags = RATE_IN_24XX },
+	{ .div = 6, .val = 6, .flags = RATE_IN_24XX },
+	{ .div = 8, .val = 8, .flags = RATE_IN_24XX },
+	{ .div = 9, .val = 9, .flags = RATE_IN_24XX },
+	{ .div = 12, .val = 12, .flags = RATE_IN_24XX },
+	{ .div = 16, .val = 16, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss1_fck_clksel[] = {
+	{ .parent = &sys_ck,  .rates = dss1_fck_sys_rates },
+	{ .parent = &core_ck, .rates = dss1_fck_core_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dss_ick = {		/* Enables both L3,L4 ICLK's */
+	.name		= "dss_ick",
+	.parent		= &l4_ck,	/* really both l3 and l4 */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_fck = {
+	.name		= "dss1_fck",
+	.parent		= &core_ck,		/* Core or sys */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS1_MASK,
+	.clksel		= dss1_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static const struct clksel_rate dss2_fck_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dss2_fck_48m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel dss2_fck_clksel[] = {
+	{ .parent = &sys_ck,	  .rates = dss2_fck_sys_rates },
+	{ .parent = &func_48m_ck, .rates = dss2_fck_48m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss2_fck = {		/* Alt clk used in power management */
+	.name		= "dss2_fck",
+	.parent		= &sys_ck,		/* fixed at sys_ck or 48MHz */
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_DSS2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_DSS2_MASK,
+	.clksel		= dss2_fck_clksel,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_54m_fck = {	/* Alt clk used in power management */
+	.name		= "dss_54m_fck",	/* 54m tv clk */
+	.parent		= &func_54m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_TV_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * CORE power domain ICLK & FCLK defines.
+ * Many of the these can have more than one possible parent. Entries
+ * here will likely have an L4 interface parent, and may have multiple
+ * functional clock parents.
+ */
+static const struct clksel_rate gpt_alt_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_24XX | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap24xx_gpt_clksel[] = {
+	{ .parent = &func_32k_ck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	  .rates = gpt_sys_rates },
+	{ .parent = &alt_ck,	  .rates = gpt_alt_rates },
+	{ .parent = NULL },
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPT1_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT1_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT2_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT2_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT3_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT3_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT4_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT4_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT5_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT5_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT6_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT6_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT7_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT7_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT8_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT8_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT9_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT9_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT10_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT10_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT11_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT11_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_GPT12_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL2),
+	.clksel_mask	= OMAP24XX_CLKSEL_GPT12_MASK,
+	.clksel		= omap24xx_gpt_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.id		= 1,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.id		= 2,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.id		= 3,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.id		= 3,
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_UART2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_UART3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_ick = {
+	.name		= "gpios_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpios_fck = {
+	.name		= "gpios_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_GPIOS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_ick = {
+	.name		= "mpu_wdt_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mpu_wdt_fck = {
+	.name		= "mpu_wdt_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP24XX_EN_MPU_WDT_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sync_32k_ick = {
+	.name		= "sync_32k_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_32KSYNC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_WDT1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP24XX_EN_OMAPCTRL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP2430_EN_ICR_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	.name		= "cam_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_fck = {
+	.name		= "cam_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_CAM_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MAILBOXES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_ick = {
+	.name		= "wdt4_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt4_fck = {
+	.name		= "wdt4_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_WDT4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_WDT3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_MSPRO_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_ick = {
+	.name		= "mmc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc_fck = {
+	.name		= "mmc_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_MMC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_fck = {
+	.name		= "fac_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_FAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_ick = {
+	.name		= "eac_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk eac_fck = {
+	.name		= "eac_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_EAC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP24XX_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.id		= 2,
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs2_fck = {
+	.name		= "i2chs_fck",
+	.id		= 2,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.parent		= &func_12m_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_I2C1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2chs1_fck = {
+	.name		= "i2chs_fck",
+	.id		= 1,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_I2CHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_fck = {
+	.name		= "sdma_fck",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdma_ick = {
+	.name		= "sdma_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk vlynq_ick = {
+	.name		= "vlynq_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate vlynq_fck_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate vlynq_fck_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_242X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_242X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_242X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_242X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_242X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_242X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_242X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_242X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_242X | DEFAULT_RATE },
+	{ .div = 18, .val = 18, .flags = RATE_IN_242X },
+	{ .div = 0 }
+};
+
+static const struct clksel vlynq_fck_clksel[] = {
+	{ .parent = &func_96m_ck, .rates = vlynq_fck_96m_rates },
+	{ .parent = &core_ck,	  .rates = vlynq_fck_core_rates },
+	{ .parent = NULL }
+};
+
+static struct clk vlynq_fck = {
+	.name		= "vlynq_fck",
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP242X | DELAYED_APP,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP2420_EN_VLYNQ_SHIFT,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP2420_CLKSEL_VLYNQ_MASK,
+	.clksel		= vlynq_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | ENABLE_ON_INIT,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP2430_EN_SDRC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des_ick = {
+	.name		= "des_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_DES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha_ick = {
+	.name		= "sha_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_SHA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes_ick = {
+	.name		= "aes_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_AES_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_ICLKEN4),
+	.enable_bit	= OMAP24XX_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_fck = {
+	.name		= "usb_fck",
+	.parent		= &func_48m_ck,
+	.flags		= CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP24XX_EN_USB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhs_ick = {
+	.name		= "usbhs_ick",
+	.parent		= &core_l3_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_USBHS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.id		= 1,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.id		= 1,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.id		= 2,
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.id		= 2,
+	.parent		= &func_96m_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHS2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_GPIO5_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mdm_intc_ick = {
+	.name		= "mdm_intc_ick",
+	.parent		= &l4_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP2430_EN_MDM_INTC_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb1_fck = {
+	.name		= "mmchsdb_fck",
+	.id		= 1,
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchsdb2_fck = {
+	.name		= "mmchsdb_fck",
+	.id		= 2,
+	.parent		= &func_32k_ck,
+	.flags		= CLOCK_IN_OMAP243X,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
+	.enable_bit	= OMAP2430_EN_MMCHSDB2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * This clock is a composite clock which does entire set changes then
+ * forces a rebalance. It keys on the MPU speed, but it really could
+ * be any key speed part of a set in the rate table.
+ *
+ * to really change a set, you need memory table sets which get changed
+ * in sram, pre-notifiers & post notifiers, changing the top set, without
+ * having low level display recalc's won't work... this is why dpm notifiers
+ * work, isr's off, walk a list of clocks already _off_ and not messing with
+ * the bus.
+ *
+ * This clock should have no parent. It embodies the entire upper level
+ * active set. A parent will mess up some of the init also.
+ */
+static struct clk virt_prcm_set = {
+	.name		= "virt_prcm_set",
+	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
+				VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
+	.parent		= &mpu_ck,	/* Indexed by mpu speed, no parent */
+	.recalc		= &omap2_table_mpu_recalc,	/* sets are keyed on mpu rate */
+	.set_rate	= &omap2_select_table_rate,
+	.round_rate	= &omap2_round_to_table_rate,
+};
+
+static struct clk *onchip_24xx_clks[] __initdata = {
+	/* external root sources */
+	&func_32k_ck,
+	&osc_ck,
+	&sys_ck,
+	&alt_ck,
+	/* internal analog sources */
+	&dpll_ck,
+	&apll96_ck,
+	&apll54_ck,
+	/* internal prcm root sources */
+	&func_54m_ck,
+	&core_ck,
+	&func_96m_ck,
+	&func_48m_ck,
+	&func_12m_ck,
+	&wdt1_osc_ck,
+	&sys_clkout_src,
+	&sys_clkout,
+	&sys_clkout2_src,
+	&sys_clkout2,
+	&emul_ck,
+	/* mpu domain clocks */
+	&mpu_ck,
+	/* dsp domain clocks */
+	&dsp_fck,
+	&dsp_irate_ick,
+	&dsp_ick,		/* 242x */
+	&iva2_1_ick,		/* 243x */
+	&iva1_ifck,		/* 242x */
+	&iva1_mpu_int_ifck,	/* 242x */
+	/* GFX domain clocks */
+	&gfx_3d_fck,
+	&gfx_2d_fck,
+	&gfx_ick,
+	/* Modem domain clocks */
+	&mdm_ick,
+	&mdm_osc_ck,
+	/* DSS domain clocks */
+	&dss_ick,
+	&dss1_fck,
+	&dss2_fck,
+	&dss_54m_fck,
+	/* L3 domain clocks */
+	&core_l3_ck,
+	&ssi_ssr_sst_fck,
+	&usb_l4_ick,
+	/* L4 domain clocks */
+	&l4_ck,			/* used as both core_l4 and wu_l4 */
+	&ssi_l4_ick,
+	/* virtual meta-group clock */
+	&virt_prcm_set,
+	/* general l4 interface ck, multi-parent functional clk */
+	&gpt1_ick,
+	&gpt1_fck,
+	&gpt2_ick,
+	&gpt2_fck,
+	&gpt3_ick,
+	&gpt3_fck,
+	&gpt4_ick,
+	&gpt4_fck,
+	&gpt5_ick,
+	&gpt5_fck,
+	&gpt6_ick,
+	&gpt6_fck,
+	&gpt7_ick,
+	&gpt7_fck,
+	&gpt8_ick,
+	&gpt8_fck,
+	&gpt9_ick,
+	&gpt9_fck,
+	&gpt10_ick,
+	&gpt10_fck,
+	&gpt11_ick,
+	&gpt11_fck,
+	&gpt12_ick,
+	&gpt12_fck,
+	&mcbsp1_ick,
+	&mcbsp1_fck,
+	&mcbsp2_ick,
+	&mcbsp2_fck,
+	&mcbsp3_ick,
+	&mcbsp3_fck,
+	&mcbsp4_ick,
+	&mcbsp4_fck,
+	&mcbsp5_ick,
+	&mcbsp5_fck,
+	&mcspi1_ick,
+	&mcspi1_fck,
+	&mcspi2_ick,
+	&mcspi2_fck,
+	&mcspi3_ick,
+	&mcspi3_fck,
+	&uart1_ick,
+	&uart1_fck,
+	&uart2_ick,
+	&uart2_fck,
+	&uart3_ick,
+	&uart3_fck,
+	&gpios_ick,
+	&gpios_fck,
+	&mpu_wdt_ick,
+	&mpu_wdt_fck,
+	&sync_32k_ick,
+	&wdt1_ick,
+	&omapctrl_ick,
+	&icr_ick,
+	&cam_fck,
+	&cam_ick,
+	&mailboxes_ick,
+	&wdt4_ick,
+	&wdt4_fck,
+	&wdt3_ick,
+	&wdt3_fck,
+	&mspro_ick,
+	&mspro_fck,
+	&mmc_ick,
+	&mmc_fck,
+	&fac_ick,
+	&fac_fck,
+	&eac_ick,
+	&eac_fck,
+	&hdq_ick,
+	&hdq_fck,
+	&i2c1_ick,
+	&i2c1_fck,
+	&i2chs1_fck,
+	&i2c2_ick,
+	&i2c2_fck,
+	&i2chs2_fck,
+	&gpmc_fck,
+	&sdma_fck,
+	&sdma_ick,
+	&vlynq_ick,
+	&vlynq_fck,
+	&sdrc_ick,
+	&des_ick,
+	&sha_ick,
+	&rng_ick,
+	&aes_ick,
+	&pka_ick,
+	&usb_fck,
+	&usbhs_ick,
+	&mmchs1_ick,
+	&mmchs1_fck,
+	&mmchs2_ick,
+	&mmchs2_fck,
+	&gpio5_ick,
+	&gpio5_fck,
+	&mdm_intc_ick,
+	&mmchsdb1_fck,
+	&mmchsdb2_fck,
+};
+
+#endif
+
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
new file mode 100644
index 000000000000..b42bdd6079a5
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -0,0 +1,235 @@
+/*
+ * OMAP3-specific clock framework functions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/arch/clock.h>
+#include <asm/arch/sram.h>
+#include <asm/div64.h>
+#include <asm/bitops.h>
+
+#include "memory.h"
+#include "clock.h"
+#include "clock34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/* CM_CLKEN_PLL*.EN* bit values */
+#define DPLL_LOCKED		0x7
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+static void omap3_dpll_recalc(struct clk *clk)
+{
+	clk->rate = omap2_get_dpll_rate(clk);
+
+	propagate_rate(clk);
+}
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+static void omap3_clkoutx2_recalc(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+	struct clk *pclk;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	pclk = clk->parent;
+	while (pclk && !pclk->dpll_data)
+		pclk = pclk->parent;
+
+	/* clk does not have a DPLL as a parent? */
+	WARN_ON(!pclk);
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->control_reg || !dd->enable_mask);
+
+	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if (v != DPLL_LOCKED)
+		clk->rate = clk->parent->rate;
+	else
+		clk->rate = clk->parent->rate * 2;
+
+	if (clk->flags & RATE_PROPAGATES)
+		propagate_rate(clk);
+}
+
+/*
+ * As it is structured now, this will prevent an OMAP2/3 multiboot
+ * kernel from compiling.  This will need further attention.
+ */
+#if defined(CONFIG_ARCH_OMAP3)
+
+static struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	/* REVISIT: Not ready for 343x */
+#if 0
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+#endif
+}
+
+/* REVISIT: Move this init stuff out into clock.c */
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	if (!mpurate)
+		return -EINVAL;
+
+	/* REVISIT: not yet ready for 343x */
+#if 0
+	if (omap2_select_table_rate(&virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL3/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (dpll1_fck.rate / 1000000)) ;
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct clk **clkp;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	/* REVISIT: Ultimately this will be used for multiboot */
+#if 0
+	if (cpu_is_omap242x()) {
+		cpu_mask = RATE_IN_242X;
+		cpu_clkflg = CLOCK_IN_OMAP242X;
+		clkp = onchip_24xx_clks;
+	} else if (cpu_is_omap2430()) {
+		cpu_mask = RATE_IN_243X;
+		cpu_clkflg = CLOCK_IN_OMAP243X;
+		clkp = onchip_24xx_clks;
+	}
+#endif
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_343X;
+		cpu_clkflg = CLOCK_IN_OMAP343X;
+		clkp = onchip_34xx_clks;
+
+		/*
+		 * Update this if there are further clock changes between ES2
+		 * and production parts
+		 */
+		if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0)) {
+			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
+			cpu_clkflg |= CLOCK_IN_OMAP3430ES1;
+		} else {
+			cpu_mask |= RATE_IN_3430ES2;
+			cpu_clkflg |= CLOCK_IN_OMAP3430ES2;
+		}
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (clkp = onchip_34xx_clks;
+	     clkp < onchip_34xx_clks + ARRAY_SIZE(onchip_34xx_clks);
+	     clkp++) {
+		if ((*clkp)->flags & cpu_clkflg)
+			clk_register(*clkp);
+	}
+
+	/* REVISIT: Not yet ready for OMAP3 */
+#if 0
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			 break;
+	}
+	curr_prcm_set = prcm;
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/ARM core): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
+	/* REVISIT: not yet ready for 343x */
+#if 0
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+#endif
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
new file mode 100644
index 000000000000..cf4644a94b9b
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -0,0 +1,3009 @@
+/*
+ * OMAP3 clock framework
+ *
+ * Virtual clocks are introduced as a convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
+
+#include <asm/arch/control.h>
+
+#include "clock.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+static void omap3_dpll_recalc(struct clk *clk);
+static void omap3_clkoutx2_recalc(struct clk *clk);
+
+/*
+ * DPLL1 supplies clock to the MPU.
+ * DPLL2 supplies clock to the IVA2.
+ * DPLL3 supplies CORE domain clocks.
+ * DPLL4 supplies peripheral clocks.
+ * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
+ */
+
+/* PRM CLOCKS */
+
+/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
+static struct clk omap_32k_fck = {
+	.name		= "omap_32k_fck",
+	.rate		= 32768,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk secure_32k_fck = {
+	.name		= "secure_32k_fck",
+	.rate		= 32768,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* Virtual source clocks for osc_sys_ck */
+static struct clk virt_12m_ck = {
+	.name		= "virt_12m_ck",
+	.rate		= 12000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_13m_ck = {
+	.name		= "virt_13m_ck",
+	.rate		= 13000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_16_8m_ck = {
+	.name		= "virt_16_8m_ck",
+	.rate		= 16800000,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_19_2m_ck = {
+	.name		= "virt_19_2m_ck",
+	.rate		= 19200000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_26m_ck = {
+	.name		= "virt_26m_ck",
+	.rate		= 26000000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static struct clk virt_38_4m_ck = {
+	.name		= "virt_38_4m_ck",
+	.rate		= 38400000,
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+static const struct clksel_rate osc_sys_12m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_13m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_16_8m_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_19_2m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_26m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_38_4m_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel osc_sys_clksel[] = {
+	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
+	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
+	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
+	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
+	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
+	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
+	{ .parent = NULL },
+};
+
+/* Oscillator clock */
+/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
+static struct clk osc_sys_ck = {
+	.name		= "osc_sys_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSEL,
+	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
+	.clksel		= osc_sys_clksel,
+	/* REVISIT: deal with autoextclkmode? */
+	.flags		= CLOCK_IN_OMAP343X | RATE_FIXED | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel sys_clksel[] = {
+	{ .parent = &osc_sys_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
+/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
+static struct clk sys_ck = {
+	.name		= "sys_ck",
+	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
+	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
+	.clksel		= sys_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sys_altclk = {
+	.name		= "sys_altclk",
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* Optional external clock input for some McBSPs */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &propagate_rate,
+};
+
+/* PRM EXTERNAL CLOCK OUTPUT */
+
+static struct clk sys_clkout1 = {
+	.name		= "sys_clkout1",
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLLS */
+
+/* CM CLOCKS */
+
+static const struct clksel_rate dpll_bypass_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate dpll_locked_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate div16_dpll_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
+	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
+	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
+	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+/* DPLL1 */
+/* MPU clock source */
+/* Type: DPLL */
+static const struct dpll_data dpll1_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll1_ck = {
+	.name		= "dpll1_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll1_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed.
+ */
+static struct clk dpll1_x2_ck = {
+	.name		= "dpll1_x2_ck",
+	.parent		= &dpll1_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
+static const struct clksel div16_dpll1_x2m2_clksel[] = {
+	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * Does not exist in the TRM - needed to separate the M2 divider from
+ * bypass selection in mpu_ck
+ */
+static struct clk dpll1_x2m2_ck = {
+	.name		= "dpll1_x2m2_ck",
+	.parent		= &dpll1_x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll1_x2m2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL2 */
+/* IVA2 clock source */
+/* Type: DPLL */
+
+static const struct dpll_data dpll2_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll2_ck = {
+	.name		= "dpll2_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll2_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll2_m2x2_clksel[] = {
+	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
+ * or CLKOUTX2. CLKOUT seems most plausible.
+ */
+static struct clk dpll2_m2_ck = {
+	.name		= "dpll2_m2_ck",
+	.parent		= &dpll2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll2_m2x2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL3 */
+/* Source clock for all interfaces and for some device fclks */
+/* Type: DPLL */
+static const struct dpll_data dpll3_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll3_ck = {
+	.name		= "dpll3_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll3_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed
+ */
+static struct clk dpll3_x2_ck = {
+	.name		= "dpll3_x2_ck",
+	.parent		= &dpll3_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_dpll3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+	{ .div = 0 },
+};
+
+static const struct clksel div31_dpll3m2_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * DPLL3 output M2
+ * REVISIT: This DPLL output divider must be changed in SRAM, so until
+ * that code is ready, this should remain a 'read-only' clksel clock.
+ */
+static struct clk dpll3_m2_ck = {
+	.name		= "dpll3_m2_ck",
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div31_dpll3m2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel core_ck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= core_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel dpll3_m2x2_ck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll3_m2x2_ck = {
+	.name		= "dpll3_m2x2_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= dpll3_m2x2_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static const struct clksel div16_dpll3_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll3_m3x2_ck */
+static struct clk dpll3_m3_ck = {
+	.name		= "dpll3_m3_ck",
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
+	.clksel		= div16_dpll3_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll3_m3x2_ck = {
+	.name		= "dpll3_m3x2_ck",
+	.parent		= &dpll3_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel emu_core_alwon_ck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll3_m3x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk emu_core_alwon_ck = {
+	.name		= "emu_core_alwon_ck",
+	.parent		= &dpll3_m3x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_CORE_CLK,
+	.clksel		= emu_core_alwon_ck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL4 */
+/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
+/* Type: DPLL */
+static const struct dpll_data dpll4_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll4_ck = {
+	.name		= "dpll4_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll4_dd,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed --
+ * XXX does this serve any downstream clocks?
+ */
+static struct clk dpll4_x2_ck = {
+	.name		= "dpll4_x2_ck",
+	.parent		= &dpll4_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel div16_dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll4_m2x2_ck */
+static struct clk dpll4_m2_ck = {
+	.name		= "dpll4_m2_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+	.clksel_mask	= OMAP3430_DIV_96M_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m2x2_ck = {
+	.name		= "dpll4_m2x2_ck",
+	.parent		= &dpll4_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel omap_96m_alwon_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_96m_alwon_fck = {
+	.name		= "omap_96m_alwon_fck",
+	.parent		= &dpll4_m2x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= omap_96m_alwon_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				 PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.parent		= &omap_96m_alwon_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel cm_96m_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m2x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.parent		= &dpll4_m2x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= cm_96m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m3x2_ck */
+static struct clk dpll4_m3_ck = {
+	.name		= "dpll4_m3_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m3x2_ck = {
+	.name		= "dpll4_m3x2_ck",
+	.parent		= &dpll4_m3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel virt_omap_54m_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m3x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk virt_omap_54m_fck = {
+	.name		= "virt_omap_54m_fck",
+	.parent		= &dpll4_m3x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= virt_omap_54m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_54m_clksel[] = {
+	{ .parent = &virt_omap_54m_fck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_54m_fck = {
+	.name		= "omap_54m_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_54M,
+	.clksel		= omap_54m_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_48m_96md2_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_48m_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_48m_96md2_rates },
+	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_48m_fck = {
+	.name		= "omap_48m_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_48M,
+	.clksel		= omap_48m_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_12m_fck = {
+	.name		= "omap_12m_fck",
+	.parent		= &omap_48m_fck,
+	.fixed_div	= 4,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* This virstual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
+	.name		= "dpll4_m4_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m4x2_ck = {
+	.name		= "dpll4_m4x2_ck",
+	.parent		= &dpll4_m4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m5x2_ck */
+static struct clk dpll4_m5_ck = {
+	.name		= "dpll4_m5_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m5x2_ck = {
+	.name		= "dpll4_m5x2_ck",
+	.parent		= &dpll4_m5_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m6x2_ck */
+static struct clk dpll4_m6_ck = {
+	.name		= "dpll4_m6_ck",
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m6x2_ck = {
+	.name		= "dpll4_m6x2_ck",
+	.parent		= &dpll4_m6_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | INVERT_ENABLE,
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_per_alwon_ck = {
+	.name		= "emu_per_alwon_ck",
+	.parent		= &dpll4_m6x2_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL5 */
+/* Supplies 120MHz clock, USIM source clock */
+/* Type: DPLL */
+/* 3430ES2 only */
+static const struct dpll_data dpll5_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
+	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
+	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+};
+
+static struct clk dpll5_ck = {
+	.name		= "dpll5_ck",
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll5_dd,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				ALWAYS_ENABLED,
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll5_clksel[] = {
+	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll5_m2_ck = {
+	.name		= "dpll5_m2_ck",
+	.parent		= &dpll5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
+	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
+	.clksel		= div16_dpll5_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel omap_120m_fck_clksel[] = {
+	{ .parent = &sys_ck,      .rates = dpll_bypass_rates },
+	{ .parent = &dpll5_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_120m_fck = {
+	.name		= "omap_120m_fck",
+	.parent		= &dpll5_m2_ck,
+	.init           = &omap2_init_clksel_parent,
+	.clksel_reg     = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.clksel_mask    = OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.clksel         = omap_120m_fck_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc         = &omap2_clksel_recalc,
+};
+
+/* CM EXTERNAL CLOCK OUTPUTS */
+
+static const struct clksel_rate clkout2_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel clkout2_src_clksel[] = {
+	{ .parent = &core_ck,		  .rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		  .rates = clkout2_src_sys_rates },
+	{ .parent = &omap_96m_alwon_fck,  .rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	  .rates = clkout2_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk clkout2_src_ck = {
+	.name		= "clkout2_src_ck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
+	.clksel		= clkout2_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate sys_clkout2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM OUTPUT CLOCKS */
+
+static struct clk corex2_fck = {
+	.name		= "corex2_fck",
+	.parent		= &dpll3_m2x2_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL power domain clock controls */
+
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * REVISIT: Are these in DPLL power domain or CM power domain? docs
+ * may be inconsistent here?
+ */
+static struct clk dpll1_fck = {
+	.name		= "dpll1_fck",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * MPU clksel:
+ * If DPLL1 is locked, mpu_ck derives from DPLL1; otherwise, mpu_ck
+ * derives from the high-frequency bypass clock originating from DPLL3,
+ * called 'dpll1_fck'
+ */
+static const struct clksel mpu_clksel[] = {
+	{ .parent = &dpll1_fck,     .rates = dpll_bypass_rates },
+	{ .parent = &dpll1_x2m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mpu_ck = {
+	.name		= "mpu_ck",
+	.parent		= &dpll1_x2m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= mpu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
+static const struct clksel_rate arm_fck_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel arm_fck_clksel[] = {
+	{ .parent = &mpu_ck, .rates = arm_fck_rates },
+	{ .parent = NULL }
+};
+
+static struct clk arm_fck = {
+	.name		= "arm_fck",
+	.parent		= &mpu_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= arm_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * REVISIT: This clock is never specifically defined in the 3430 TRM,
+ * although it is referenced - so this is a guess
+ */
+static struct clk emu_mpu_alwon_ck = {
+	.name		= "emu_mpu_alwon_ck",
+	.parent		= &mpu_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll2_fck = {
+	.name		= "dpll2_fck",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * IVA2 clksel:
+ * If DPLL2 is locked, iva2_ck derives from DPLL2; otherwise, iva2_ck
+ * derives from the high-frequency bypass clock originating from DPLL3,
+ * called 'dpll2_fck'
+ */
+
+static const struct clksel iva2_clksel[] = {
+	{ .parent = &dpll2_fck,   .rates = dpll_bypass_rates },
+	{ .parent = &dpll2_m2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk iva2_ck = {
+	.name		= "iva2_ck",
+	.parent		= &dpll2_m2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_IVA2_CLK_MASK,
+	.clksel		= iva2_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* Common interface clocks */
+
+static struct clk l3_ick = {
+	.name		= "l3_ick",
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
+	.clksel		= div2_core_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel div2_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ick = {
+	.name		= "l4_ick",
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
+	.clksel		= div2_l3_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+
+};
+
+static const struct clksel div2_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk rm_ick = {
+	.name		= "rm_ick",
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
+	.clksel		= div2_l4_clksel,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* GFX power domain */
+
+/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
+
+static const struct clksel gfx_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = gfx_l3_rates },
+	{ .parent = NULL }
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_l3_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES1 | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_l3_ick = {
+	.name		= "gfx_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg1_ck = {
+	.name		= "gfx_cg1_ck",
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg2_ck = {
+	.name		= "gfx_cg2_ck",
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+/* SGX power domain - 3430ES2 only */
+
+static const struct clksel_rate sgx_core_rates[] = {
+	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_96m_rates[] = {
+	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel sgx_clksel[] = {
+	{ .parent = &core_ck,	 .rates = sgx_core_rates },
+	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sgx_fck = {
+	.name		= "sgx_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
+	.clksel		= sgx_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sgx_ick = {
+	.name		= "sgx_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_SGX_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE power domain */
+
+static struct clk d2d_26m_fck = {
+	.name		= "d2d_26m_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap343x_gpt_clksel[] = {
+	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
+	{ .parent = NULL}
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cpefuse_fck = {
+	.name		= "cpefuse_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ts_fck = {
+	.name		= "ts_fck",
+	.parent		= &omap_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_fck = {
+	.name		= "usbtll_fck",
+	.parent		= &omap_120m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE 96M FCLK-derived clocks */
+
+static struct clk core_96m_fck = {
+	.name		= "core_96m_fck",
+	.parent		= &omap_96m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_fck = {
+	.name		= "mmchs_fck",
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_fck = {
+	.name		= "i2c_fck",
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.id 		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
+ * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
+ */
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_15_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp5_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp1_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CORE_48M_FCK-derived clocks */
+
+static struct clk core_48m_fck = {
+	.name		= "core_48m_fck",
+	.parent		= &omap_48m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_fck = {
+	.name		= "mcspi_fck",
+	.id		= 4,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.id		= 3,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.id		= 2,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.id		= 1,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fshostusb_fck = {
+	.name		= "fshostusb_fck",
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_12M_FCK based clocks */
+
+static struct clk core_12m_fck = {
+	.name		= "core_12m_fck",
+	.parent		= &omap_12m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.parent		= &core_12m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL3-derived clock */
+
+static const struct clksel_rate ssi_ssr_corex2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_clksel[] = {
+	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_fck = {
+	.name		= "ssi_ssr_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck = {
+	.name		= "ssi_sst_fck",
+	.parent		= &ssi_ssr_fck,
+	.fixed_div	= 2,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+
+
+/* CORE_L3_ICK based clocks */
+
+static struct clk core_l3_ick = {
+	.name		= "core_l3_ick",
+	.parent		= &l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick = {
+	.name		= "hsotgusb_ick",
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.parent		= &core_l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | PARENT_CONTROLS_CLOCK |
+				ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURITY_L3_ICK based clocks */
+
+static struct clk security_l3_ick = {
+	.name		= "security_l3_ick",
+	.parent		= &l3_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.parent		= &security_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_L4_ICK based clocks */
+
+static struct clk core_l4_ick = {
+	.name		= "core_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_ick = {
+	.name		= "usbtll_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_ick = {
+	.name		= "mmchs_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* Intersystem Communication Registers - chassis mode only */
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ick = {
+	.name		= "aes2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha12_ick = {
+	.name		= "sha12_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des2_ick = {
+	.name		= "des2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ick = {
+	.name		= "mcspi_ick",
+	.id		= 4,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ick = {
+	.name		= "i2c_ick",
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp5_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp1_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SSI_L4_ICK based clocks */
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick = {
+	.name		= "ssi_ick",
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
+ * but l4_ick makes more sense to me */
+
+static const struct clksel usb_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {
+	.name		= "usb_l4_ick",
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
+	.clksel		= usb_l4_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES1,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
+
+/* SECURITY_L4_ICK2 based clocks */
+
+static struct clk security_l4_ick2 = {
+	.name		= "security_l4_ick2",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes1_ick = {
+	.name		= "aes1_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha11_ick = {
+	.name		= "sha11_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des1_ick = {
+	.name		= "des1_ick",
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* DSS */
+static const struct clksel dss1_alwon_fck_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m4x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dss1_alwon_fck = {
+	.name		= "dss1_alwon_fck",
+	.parent		= &dpll4_m4x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= dss1_alwon_fck_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk dss_tv_fck = {
+	.name		= "dss_tv_fck",
+	.parent		= &omap_54m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_96m_fck = {
+	.name		= "dss_96m_fck",
+	.parent		= &omap_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss2_alwon_fck = {
+	.name		= "dss2_alwon_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* CAM */
+
+static const struct clksel cam_mclk_clksel[] = {
+	{ .parent = &sys_ck,        .rates = dpll_bypass_rates },
+	{ .parent = &dpll4_m5x2_ck, .rates = dpll_locked_rates },
+	{ .parent = NULL }
+};
+
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.parent		= &dpll4_m5x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.clksel_mask	= OMAP3430_ST_PERIPH_CLK,
+	.clksel		= cam_mclk_clksel,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cam_l3_ick = {
+	.name		= "cam_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_l4_ick = {
+	.name		= "cam_l4_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* USBHOST - 3430ES2 only */
+
+static struct clk usbhost_120m_fck = {
+	.name		= "usbhost_120m_fck",
+	.parent		= &omap_120m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_48m_fck = {
+	.name		= "usbhost_48m_fck",
+	.parent		= &omap_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_l3_ick = {
+	.name		= "usbhost_l3_ick",
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_l4_ick = {
+	.name		= "usbhost_l4_ick",
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_sar_fck = {
+	.name		= "usbhost_sar_fck",
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP_PRM_REGADDR(OMAP3430ES2_USBHOST_MOD, PM_PWSTCTRL),
+	.enable_bit	= OMAP3430ES2_SAVEANDRESTORE_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+/* WKUP */
+
+static const struct clksel_rate usim_96m_rates[] = {
+	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate usim_120m_rates[] = {
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
+	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_clksel[] = {
+	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
+	{ .parent = &omap_120m_fck,	.rates = usim_120m_rates },
+	{ .parent = &sys_ck,		.rates = div2_rates },
+	{ .parent = NULL },
+};
+
+/* 3430ES2 only */
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
+	.clksel		= usim_clksel,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk wkup_32k_fck = {
+	.name		= "wkup_32k_fck",
+	.parent		= &omap_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_fck = {
+	.name		= "gpio1_fck",
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wkup_l4_ick = {
+	.name		= "wkup_l4_ick",
+	.parent		= &sys_ck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+/* 3430ES2 only */
+/* Never specifically named in the TRM, so we have to infer a likely name */
+static struct clk usim_ick = {
+	.name		= "usim_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.flags		= CLOCK_IN_OMAP3430ES2,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ick = {
+	.name		= "wdt2_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_32ksync_ick = {
+	.name		= "omap_32ksync_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+
+
+/* PER clock domain */
+
+static struct clk per_96m_fck = {
+	.name		= "per_96m_fck",
+	.parent		= &omap_96m_alwon_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_48m_fck = {
+	.name		= "per_48m_fck",
+	.parent		= &omap_48m_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk per_32k_alwon_fck = {
+	.name		= "per_32k_alwon_fck",
+	.parent		= &omap_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_fck = {
+	.name		= "gpio6_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_fck = {
+	.name		= "gpio5_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_fck = {
+	.name		= "gpio4_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_fck = {
+	.name		= "gpio3_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_fck = {
+	.name		= "gpio2_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_l4_ick = {
+	.name		= "per_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+				PARENT_CONTROLS_CLOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp2_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp3_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp4_ick",
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel mcbsp_234_clksel[] = {
+	{ .parent = &per_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp3_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp4_fck",
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* EMU clocks */
+
+/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
+
+static const struct clksel_rate emu_src_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_per_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_mpu_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel emu_src_clksel[] = {
+	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
+	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
+	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
+	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
+	{ .parent = NULL },
+};
+
+/*
+ * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
+ * to switch the source of some of the EMU clocks.
+ * XXX Are there CLKEN bits for these EMU clks?
+ */
+static struct clk emu_src_ck = {
+	.name		= "emu_src_ck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclk_emu_rates[] = {
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclk_fck = {
+	.name		= "pclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
+	.clksel		= pclk_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclkx2_emu_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclkx2_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclkx2_fck = {
+	.name		= "pclkx2_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
+	.clksel		= pclkx2_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel atclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk atclk_fck = {
+	.name		= "atclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
+	.clksel		= atclk_emu_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk traceclk_src_fck = {
+	.name		= "traceclk_src_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate traceclk_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel traceclk_clksel[] = {
+	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
+	{ .parent = NULL },
+};
+
+static struct clk traceclk_fck = {
+	.name		= "traceclk_fck",
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
+	.clksel		= traceclk_clksel,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SR clocks */
+
+/* SmartReflex fclk (VDD1) */
+static struct clk sr1_fck = {
+	.name		= "sr1_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+/* SmartReflex fclk (VDD2) */
+static struct clk sr2_fck = {
+	.name		= "sr2_fck",
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.flags		= CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_l4_ick = {
+	.name		= "sr_l4_ick",
+	.parent		= &l4_ick,
+	.flags		= CLOCK_IN_OMAP343X,
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURE_32K_FCK clocks */
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.parent		= &secure_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_fck = {
+	.name		= "wdt1_fck",
+	.parent		= &secure_32k_fck,
+	.flags		= CLOCK_IN_OMAP343X | ALWAYS_ENABLED,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk *onchip_34xx_clks[] __initdata = {
+	&omap_32k_fck,
+	&virt_12m_ck,
+	&virt_13m_ck,
+	&virt_16_8m_ck,
+	&virt_19_2m_ck,
+	&virt_26m_ck,
+	&virt_38_4m_ck,
+	&osc_sys_ck,
+	&sys_ck,
+	&sys_altclk,
+	&mcbsp_clks,
+	&sys_clkout1,
+	&dpll1_ck,
+	&dpll1_x2_ck,
+	&dpll1_x2m2_ck,
+	&dpll2_ck,
+	&dpll2_m2_ck,
+	&dpll3_ck,
+	&core_ck,
+	&dpll3_x2_ck,
+	&dpll3_m2_ck,
+	&dpll3_m2x2_ck,
+	&dpll3_m3_ck,
+	&dpll3_m3x2_ck,
+	&emu_core_alwon_ck,
+	&dpll4_ck,
+	&dpll4_x2_ck,
+	&omap_96m_alwon_fck,
+	&omap_96m_fck,
+	&cm_96m_fck,
+	&virt_omap_54m_fck,
+	&omap_54m_fck,
+	&omap_48m_fck,
+	&omap_12m_fck,
+	&dpll4_m2_ck,
+	&dpll4_m2x2_ck,
+	&dpll4_m3_ck,
+	&dpll4_m3x2_ck,
+	&dpll4_m4_ck,
+	&dpll4_m4x2_ck,
+	&dpll4_m5_ck,
+	&dpll4_m5x2_ck,
+	&dpll4_m6_ck,
+	&dpll4_m6x2_ck,
+	&emu_per_alwon_ck,
+	&dpll5_ck,
+	&dpll5_m2_ck,
+	&omap_120m_fck,
+	&clkout2_src_ck,
+	&sys_clkout2,
+	&corex2_fck,
+	&dpll1_fck,
+	&mpu_ck,
+	&arm_fck,
+	&emu_mpu_alwon_ck,
+	&dpll2_fck,
+	&iva2_ck,
+	&l3_ick,
+	&l4_ick,
+	&rm_ick,
+	&gfx_l3_fck,
+	&gfx_l3_ick,
+	&gfx_cg1_ck,
+	&gfx_cg2_ck,
+	&sgx_fck,
+	&sgx_ick,
+	&d2d_26m_fck,
+	&gpt10_fck,
+	&gpt11_fck,
+	&cpefuse_fck,
+	&ts_fck,
+	&usbtll_fck,
+	&core_96m_fck,
+	&mmchs3_fck,
+	&mmchs2_fck,
+	&mspro_fck,
+	&mmchs1_fck,
+	&i2c3_fck,
+	&i2c2_fck,
+	&i2c1_fck,
+	&mcbsp5_fck,
+	&mcbsp1_fck,
+	&core_48m_fck,
+	&mcspi4_fck,
+	&mcspi3_fck,
+	&mcspi2_fck,
+	&mcspi1_fck,
+	&uart2_fck,
+	&uart1_fck,
+	&fshostusb_fck,
+	&core_12m_fck,
+	&hdq_fck,
+	&ssi_ssr_fck,
+	&ssi_sst_fck,
+	&core_l3_ick,
+	&hsotgusb_ick,
+	&sdrc_ick,
+	&gpmc_fck,
+	&security_l3_ick,
+	&pka_ick,
+	&core_l4_ick,
+	&usbtll_ick,
+	&mmchs3_ick,
+	&icr_ick,
+	&aes2_ick,
+	&sha12_ick,
+	&des2_ick,
+	&mmchs2_ick,
+	&mmchs1_ick,
+	&mspro_ick,
+	&hdq_ick,
+	&mcspi4_ick,
+	&mcspi3_ick,
+	&mcspi2_ick,
+	&mcspi1_ick,
+	&i2c3_ick,
+	&i2c2_ick,
+	&i2c1_ick,
+	&uart2_ick,
+	&uart1_ick,
+	&gpt11_ick,
+	&gpt10_ick,
+	&mcbsp5_ick,
+	&mcbsp1_ick,
+	&fac_ick,
+	&mailboxes_ick,
+	&omapctrl_ick,
+	&ssi_l4_ick,
+	&ssi_ick,
+	&usb_l4_ick,
+	&security_l4_ick2,
+	&aes1_ick,
+	&rng_ick,
+	&sha11_ick,
+	&des1_ick,
+	&dss1_alwon_fck,
+	&dss_tv_fck,
+	&dss_96m_fck,
+	&dss2_alwon_fck,
+	&dss_ick,
+	&cam_mclk,
+	&cam_l3_ick,
+	&cam_l4_ick,
+	&usbhost_120m_fck,
+	&usbhost_48m_fck,
+	&usbhost_l3_ick,
+	&usbhost_l4_ick,
+	&usbhost_sar_fck,
+	&usim_fck,
+	&gpt1_fck,
+	&wkup_32k_fck,
+	&gpio1_fck,
+	&wdt2_fck,
+	&wkup_l4_ick,
+	&usim_ick,
+	&wdt2_ick,
+	&wdt1_ick,
+	&gpio1_ick,
+	&omap_32ksync_ick,
+	&gpt12_ick,
+	&gpt1_ick,
+	&per_96m_fck,
+	&per_48m_fck,
+	&uart3_fck,
+	&gpt2_fck,
+	&gpt3_fck,
+	&gpt4_fck,
+	&gpt5_fck,
+	&gpt6_fck,
+	&gpt7_fck,
+	&gpt8_fck,
+	&gpt9_fck,
+	&per_32k_alwon_fck,
+	&gpio6_fck,
+	&gpio5_fck,
+	&gpio4_fck,
+	&gpio3_fck,
+	&gpio2_fck,
+	&wdt3_fck,
+	&per_l4_ick,
+	&gpio6_ick,
+	&gpio5_ick,
+	&gpio4_ick,
+	&gpio3_ick,
+	&gpio2_ick,
+	&wdt3_ick,
+	&uart3_ick,
+	&gpt9_ick,
+	&gpt8_ick,
+	&gpt7_ick,
+	&gpt6_ick,
+	&gpt5_ick,
+	&gpt4_ick,
+	&gpt3_ick,
+	&gpt2_ick,
+	&mcbsp2_ick,
+	&mcbsp3_ick,
+	&mcbsp4_ick,
+	&mcbsp2_fck,
+	&mcbsp3_fck,
+	&mcbsp4_fck,
+	&emu_src_ck,
+	&pclk_fck,
+	&pclkx2_fck,
+	&atclk_fck,
+	&traceclk_src_fck,
+	&traceclk_fck,
+	&sr1_fck,
+	&sr2_fck,
+	&sr_l4_ick,
+	&secure_32k_fck,
+	&gpt12_fck,
+	&wdt1_fck,
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-24xx.h b/arch/arm/mach-omap2/cm-regbits-24xx.h
new file mode 100644
index 000000000000..20ac38100678
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-24xx.h
@@ -0,0 +1,401 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_24XX_H
+
+/*
+ * OMAP24XX Clock Management register bits
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cm.h"
+
+/* Bits shared between registers */
+
+/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
+#define OMAP24XX_EN_CAM_SHIFT				31
+#define OMAP24XX_EN_CAM					(1 << 31)
+#define OMAP24XX_EN_WDT4_SHIFT				29
+#define OMAP24XX_EN_WDT4				(1 << 29)
+#define OMAP2420_EN_WDT3_SHIFT				28
+#define OMAP2420_EN_WDT3				(1 << 28)
+#define OMAP24XX_EN_MSPRO_SHIFT				27
+#define OMAP24XX_EN_MSPRO				(1 << 27)
+#define OMAP24XX_EN_FAC_SHIFT				25
+#define OMAP24XX_EN_FAC					(1 << 25)
+#define OMAP2420_EN_EAC_SHIFT				24
+#define OMAP2420_EN_EAC					(1 << 24)
+#define OMAP24XX_EN_HDQ_SHIFT				23
+#define OMAP24XX_EN_HDQ					(1 << 23)
+#define OMAP2420_EN_I2C2_SHIFT				20
+#define OMAP2420_EN_I2C2				(1 << 20)
+#define OMAP2420_EN_I2C1_SHIFT				19
+#define OMAP2420_EN_I2C1				(1 << 19)
+
+/* CM_FCLKEN2_CORE and CM_ICLKEN2_CORE shared bits */
+#define OMAP2430_EN_MCBSP5_SHIFT			5
+#define OMAP2430_EN_MCBSP5				(1 << 5)
+#define OMAP2430_EN_MCBSP4_SHIFT			4
+#define OMAP2430_EN_MCBSP4				(1 << 4)
+#define OMAP2430_EN_MCBSP3_SHIFT			3
+#define OMAP2430_EN_MCBSP3				(1 << 3)
+#define OMAP24XX_EN_SSI_SHIFT				1
+#define OMAP24XX_EN_SSI					(1 << 1)
+
+/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
+#define OMAP24XX_EN_MPU_WDT_SHIFT			3
+#define OMAP24XX_EN_MPU_WDT				(1 << 3)
+
+/* Bits specific to each register */
+
+/* CM_IDLEST_MPU */
+/* 2430 only */
+#define OMAP2430_ST_MPU					(1 << 0)
+
+/* CM_CLKSEL_MPU */
+#define OMAP24XX_CLKSEL_MPU_SHIFT			0
+#define OMAP24XX_CLKSEL_MPU_MASK			(0x1f << 0)
+
+/* CM_CLKSTCTRL_MPU */
+#define OMAP24XX_AUTOSTATE_MPU				(1 << 0)
+
+/* CM_FCLKEN1_CORE specific bits*/
+#define OMAP24XX_EN_TV_SHIFT				2
+#define OMAP24XX_EN_TV					(1 << 2)
+#define OMAP24XX_EN_DSS2_SHIFT				1
+#define OMAP24XX_EN_DSS2				(1 << 1)
+#define OMAP24XX_EN_DSS1_SHIFT				0
+#define OMAP24XX_EN_DSS1				(1 << 0)
+
+/* CM_FCLKEN2_CORE specific bits */
+#define OMAP2430_EN_I2CHS2_SHIFT			20
+#define OMAP2430_EN_I2CHS2				(1 << 20)
+#define OMAP2430_EN_I2CHS1_SHIFT			19
+#define OMAP2430_EN_I2CHS1				(1 << 19)
+#define OMAP2430_EN_MMCHSDB2_SHIFT			17
+#define OMAP2430_EN_MMCHSDB2				(1 << 17)
+#define OMAP2430_EN_MMCHSDB1_SHIFT			16
+#define OMAP2430_EN_MMCHSDB1				(1 << 16)
+
+/* CM_ICLKEN1_CORE specific bits */
+#define OMAP24XX_EN_MAILBOXES_SHIFT			30
+#define OMAP24XX_EN_MAILBOXES				(1 << 30)
+#define OMAP24XX_EN_DSS_SHIFT				0
+#define OMAP24XX_EN_DSS					(1 << 0)
+
+/* CM_ICLKEN2_CORE specific bits */
+
+/* CM_ICLKEN3_CORE */
+/* 2430 only */
+#define OMAP2430_EN_SDRC_SHIFT				2
+#define OMAP2430_EN_SDRC				(1 << 2)
+
+/* CM_ICLKEN4_CORE */
+#define OMAP24XX_EN_PKA_SHIFT				4
+#define OMAP24XX_EN_PKA					(1 << 4)
+#define OMAP24XX_EN_AES_SHIFT				3
+#define OMAP24XX_EN_AES					(1 << 3)
+#define OMAP24XX_EN_RNG_SHIFT				2
+#define OMAP24XX_EN_RNG					(1 << 2)
+#define OMAP24XX_EN_SHA_SHIFT				1
+#define OMAP24XX_EN_SHA					(1 << 1)
+#define OMAP24XX_EN_DES_SHIFT				0
+#define OMAP24XX_EN_DES					(1 << 0)
+
+/* CM_IDLEST1_CORE specific bits */
+#define OMAP24XX_ST_MAILBOXES				(1 << 30)
+#define OMAP24XX_ST_WDT4				(1 << 29)
+#define OMAP2420_ST_WDT3				(1 << 28)
+#define OMAP24XX_ST_MSPRO				(1 << 27)
+#define OMAP24XX_ST_FAC					(1 << 25)
+#define OMAP2420_ST_EAC					(1 << 24)
+#define OMAP24XX_ST_HDQ					(1 << 23)
+#define OMAP24XX_ST_I2C2				(1 << 20)
+#define OMAP24XX_ST_I2C1				(1 << 19)
+#define OMAP24XX_ST_MCBSP2				(1 << 16)
+#define OMAP24XX_ST_MCBSP1				(1 << 15)
+#define OMAP24XX_ST_DSS					(1 << 0)
+
+/* CM_IDLEST2_CORE */
+#define OMAP2430_ST_MCBSP5				(1 << 5)
+#define OMAP2430_ST_MCBSP4				(1 << 4)
+#define OMAP2430_ST_MCBSP3				(1 << 3)
+#define OMAP24XX_ST_SSI					(1 << 1)
+
+/* CM_IDLEST3_CORE */
+/* 2430 only */
+#define OMAP2430_ST_SDRC				(1 << 2)
+
+/* CM_IDLEST4_CORE */
+#define OMAP24XX_ST_PKA					(1 << 4)
+#define OMAP24XX_ST_AES					(1 << 3)
+#define OMAP24XX_ST_RNG					(1 << 2)
+#define OMAP24XX_ST_SHA					(1 << 1)
+#define OMAP24XX_ST_DES					(1 << 0)
+
+/* CM_AUTOIDLE1_CORE */
+#define OMAP24XX_AUTO_CAM				(1 << 31)
+#define OMAP24XX_AUTO_MAILBOXES				(1 << 30)
+#define OMAP24XX_AUTO_WDT4				(1 << 29)
+#define OMAP2420_AUTO_WDT3				(1 << 28)
+#define OMAP24XX_AUTO_MSPRO				(1 << 27)
+#define OMAP2420_AUTO_MMC				(1 << 26)
+#define OMAP24XX_AUTO_FAC				(1 << 25)
+#define OMAP2420_AUTO_EAC				(1 << 24)
+#define OMAP24XX_AUTO_HDQ				(1 << 23)
+#define OMAP24XX_AUTO_UART2				(1 << 22)
+#define OMAP24XX_AUTO_UART1				(1 << 21)
+#define OMAP24XX_AUTO_I2C2				(1 << 20)
+#define OMAP24XX_AUTO_I2C1				(1 << 19)
+#define OMAP24XX_AUTO_MCSPI2				(1 << 18)
+#define OMAP24XX_AUTO_MCSPI1				(1 << 17)
+#define OMAP24XX_AUTO_MCBSP2				(1 << 16)
+#define OMAP24XX_AUTO_MCBSP1				(1 << 15)
+#define OMAP24XX_AUTO_GPT12				(1 << 14)
+#define OMAP24XX_AUTO_GPT11				(1 << 13)
+#define OMAP24XX_AUTO_GPT10				(1 << 12)
+#define OMAP24XX_AUTO_GPT9				(1 << 11)
+#define OMAP24XX_AUTO_GPT8				(1 << 10)
+#define OMAP24XX_AUTO_GPT7				(1 << 9)
+#define OMAP24XX_AUTO_GPT6				(1 << 8)
+#define OMAP24XX_AUTO_GPT5				(1 << 7)
+#define OMAP24XX_AUTO_GPT4				(1 << 6)
+#define OMAP24XX_AUTO_GPT3				(1 << 5)
+#define OMAP24XX_AUTO_GPT2				(1 << 4)
+#define OMAP2420_AUTO_VLYNQ				(1 << 3)
+#define OMAP24XX_AUTO_DSS				(1 << 0)
+
+/* CM_AUTOIDLE2_CORE */
+#define OMAP2430_AUTO_MDM_INTC				(1 << 11)
+#define OMAP2430_AUTO_GPIO5				(1 << 10)
+#define OMAP2430_AUTO_MCSPI3				(1 << 9)
+#define OMAP2430_AUTO_MMCHS2				(1 << 8)
+#define OMAP2430_AUTO_MMCHS1				(1 << 7)
+#define OMAP2430_AUTO_USBHS				(1 << 6)
+#define OMAP2430_AUTO_MCBSP5				(1 << 5)
+#define OMAP2430_AUTO_MCBSP4				(1 << 4)
+#define OMAP2430_AUTO_MCBSP3				(1 << 3)
+#define OMAP24XX_AUTO_UART3				(1 << 2)
+#define OMAP24XX_AUTO_SSI				(1 << 1)
+#define OMAP24XX_AUTO_USB				(1 << 0)
+
+/* CM_AUTOIDLE3_CORE */
+#define OMAP24XX_AUTO_SDRC				(1 << 2)
+#define OMAP24XX_AUTO_GPMC				(1 << 1)
+#define OMAP24XX_AUTO_SDMA				(1 << 0)
+
+/* CM_AUTOIDLE4_CORE */
+#define OMAP24XX_AUTO_PKA				(1 << 4)
+#define OMAP24XX_AUTO_AES				(1 << 3)
+#define OMAP24XX_AUTO_RNG				(1 << 2)
+#define OMAP24XX_AUTO_SHA				(1 << 1)
+#define OMAP24XX_AUTO_DES				(1 << 0)
+
+/* CM_CLKSEL1_CORE */
+#define OMAP24XX_CLKSEL_USB_SHIFT			25
+#define OMAP24XX_CLKSEL_USB_MASK			(0x7 << 25)
+#define OMAP24XX_CLKSEL_SSI_SHIFT			20
+#define OMAP24XX_CLKSEL_SSI_MASK			(0x1f << 20)
+#define OMAP2420_CLKSEL_VLYNQ_SHIFT			15
+#define OMAP2420_CLKSEL_VLYNQ_MASK			(0x1f << 15)
+#define OMAP24XX_CLKSEL_DSS2_SHIFT			13
+#define OMAP24XX_CLKSEL_DSS2_MASK			(0x1 << 13)
+#define OMAP24XX_CLKSEL_DSS1_SHIFT			8
+#define OMAP24XX_CLKSEL_DSS1_MASK			(0x1f << 8)
+#define OMAP24XX_CLKSEL_L4_SHIFT			5
+#define OMAP24XX_CLKSEL_L4_MASK				(0x3 << 5)
+#define OMAP24XX_CLKSEL_L3_SHIFT			0
+#define OMAP24XX_CLKSEL_L3_MASK				(0x1f << 0)
+
+/* CM_CLKSEL2_CORE */
+#define OMAP24XX_CLKSEL_GPT12_SHIFT			22
+#define OMAP24XX_CLKSEL_GPT12_MASK			(0x3 << 22)
+#define OMAP24XX_CLKSEL_GPT11_SHIFT			20
+#define OMAP24XX_CLKSEL_GPT11_MASK			(0x3 << 20)
+#define OMAP24XX_CLKSEL_GPT10_SHIFT			18
+#define OMAP24XX_CLKSEL_GPT10_MASK			(0x3 << 18)
+#define OMAP24XX_CLKSEL_GPT9_SHIFT			16
+#define OMAP24XX_CLKSEL_GPT9_MASK			(0x3 << 16)
+#define OMAP24XX_CLKSEL_GPT8_SHIFT			14
+#define OMAP24XX_CLKSEL_GPT8_MASK			(0x3 << 14)
+#define OMAP24XX_CLKSEL_GPT7_SHIFT			12
+#define OMAP24XX_CLKSEL_GPT7_MASK			(0x3 << 12)
+#define OMAP24XX_CLKSEL_GPT6_SHIFT			10
+#define OMAP24XX_CLKSEL_GPT6_MASK			(0x3 << 10)
+#define OMAP24XX_CLKSEL_GPT5_SHIFT			8
+#define OMAP24XX_CLKSEL_GPT5_MASK			(0x3 << 8)
+#define OMAP24XX_CLKSEL_GPT4_SHIFT			6
+#define OMAP24XX_CLKSEL_GPT4_MASK			(0x3 << 6)
+#define OMAP24XX_CLKSEL_GPT3_SHIFT			4
+#define OMAP24XX_CLKSEL_GPT3_MASK			(0x3 << 4)
+#define OMAP24XX_CLKSEL_GPT2_SHIFT			2
+#define OMAP24XX_CLKSEL_GPT2_MASK			(0x3 << 2)
+
+/* CM_CLKSTCTRL_CORE */
+#define OMAP24XX_AUTOSTATE_DSS				(1 << 2)
+#define OMAP24XX_AUTOSTATE_L4				(1 << 1)
+#define OMAP24XX_AUTOSTATE_L3				(1 << 0)
+
+/* CM_FCLKEN_GFX */
+#define OMAP24XX_EN_3D_SHIFT				2
+#define OMAP24XX_EN_3D					(1 << 2)
+#define OMAP24XX_EN_2D_SHIFT				1
+#define OMAP24XX_EN_2D					(1 << 1)
+
+/* CM_ICLKEN_GFX specific bits */
+
+/* CM_IDLEST_GFX specific bits */
+
+/* CM_CLKSEL_GFX specific bits */
+
+/* CM_CLKSTCTRL_GFX */
+#define OMAP24XX_AUTOSTATE_GFX				(1 << 0)
+
+/* CM_FCLKEN_WKUP specific bits */
+
+/* CM_ICLKEN_WKUP specific bits */
+#define OMAP2430_EN_ICR_SHIFT				6
+#define OMAP2430_EN_ICR					(1 << 6)
+#define OMAP24XX_EN_OMAPCTRL_SHIFT			5
+#define OMAP24XX_EN_OMAPCTRL				(1 << 5)
+#define OMAP24XX_EN_WDT1_SHIFT				4
+#define OMAP24XX_EN_WDT1				(1 << 4)
+#define OMAP24XX_EN_32KSYNC_SHIFT			1
+#define OMAP24XX_EN_32KSYNC				(1 << 1)
+
+/* CM_IDLEST_WKUP specific bits */
+#define OMAP2430_ST_ICR					(1 << 6)
+#define OMAP24XX_ST_OMAPCTRL				(1 << 5)
+#define OMAP24XX_ST_WDT1				(1 << 4)
+#define OMAP24XX_ST_MPU_WDT				(1 << 3)
+#define OMAP24XX_ST_32KSYNC				(1 << 1)
+
+/* CM_AUTOIDLE_WKUP */
+#define OMAP24XX_AUTO_OMAPCTRL				(1 << 5)
+#define OMAP24XX_AUTO_WDT1				(1 << 4)
+#define OMAP24XX_AUTO_MPU_WDT				(1 << 3)
+#define OMAP24XX_AUTO_GPIOS				(1 << 2)
+#define OMAP24XX_AUTO_32KSYNC				(1 << 1)
+#define OMAP24XX_AUTO_GPT1				(1 << 0)
+
+/* CM_CLKSEL_WKUP */
+#define OMAP24XX_CLKSEL_GPT1_SHIFT			0
+#define OMAP24XX_CLKSEL_GPT1_MASK			(0x3 << 0)
+
+/* CM_CLKEN_PLL */
+#define OMAP24XX_EN_54M_PLL_SHIFT			6
+#define OMAP24XX_EN_54M_PLL_MASK			(0x3 << 6)
+#define OMAP24XX_EN_96M_PLL_SHIFT			2
+#define OMAP24XX_EN_96M_PLL_MASK			(0x3 << 2)
+#define OMAP24XX_EN_DPLL_SHIFT				0
+#define OMAP24XX_EN_DPLL_MASK				(0x3 << 0)
+
+/* CM_IDLEST_CKGEN */
+#define OMAP24XX_ST_54M_APLL				(1 << 9)
+#define OMAP24XX_ST_96M_APLL				(1 << 8)
+#define OMAP24XX_ST_54M_CLK				(1 << 6)
+#define OMAP24XX_ST_12M_CLK				(1 << 5)
+#define OMAP24XX_ST_48M_CLK				(1 << 4)
+#define OMAP24XX_ST_96M_CLK				(1 << 2)
+#define OMAP24XX_ST_CORE_CLK_SHIFT			0
+#define OMAP24XX_ST_CORE_CLK_MASK			(0x3 << 0)
+
+/* CM_AUTOIDLE_PLL */
+#define OMAP24XX_AUTO_54M_SHIFT				6
+#define OMAP24XX_AUTO_54M_MASK				(0x3 << 6)
+#define OMAP24XX_AUTO_96M_SHIFT				2
+#define OMAP24XX_AUTO_96M_MASK				(0x3 << 2)
+#define OMAP24XX_AUTO_DPLL_SHIFT			0
+#define OMAP24XX_AUTO_DPLL_MASK				(0x3 << 0)
+
+/* CM_CLKSEL1_PLL */
+#define OMAP2430_MAXDPLLFASTLOCK_SHIFT			28
+#define OMAP2430_MAXDPLLFASTLOCK_MASK			(0x7 << 28)
+#define OMAP24XX_APLLS_CLKIN_SHIFT			23
+#define OMAP24XX_APLLS_CLKIN_MASK			(0x7 << 23)
+#define OMAP24XX_DPLL_MULT_SHIFT			12
+#define OMAP24XX_DPLL_MULT_MASK				(0x3ff << 12)
+#define OMAP24XX_DPLL_DIV_SHIFT				8
+#define OMAP24XX_DPLL_DIV_MASK				(0xf << 8)
+#define OMAP24XX_54M_SOURCE_SHIFT			5
+#define OMAP24XX_54M_SOURCE				(1 << 5)
+#define OMAP2430_96M_SOURCE_SHIFT			4
+#define OMAP2430_96M_SOURCE				(1 << 4)
+#define OMAP24XX_48M_SOURCE_SHIFT			3
+#define OMAP24XX_48M_SOURCE				(1 << 3)
+#define OMAP2430_ALTCLK_SOURCE_SHIFT			0
+#define OMAP2430_ALTCLK_SOURCE_MASK			(0x7 << 0)
+
+/* CM_CLKSEL2_PLL */
+#define OMAP24XX_CORE_CLK_SRC_SHIFT			0
+#define OMAP24XX_CORE_CLK_SRC_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_DSP */
+#define OMAP2420_EN_IVA_COP_SHIFT			10
+#define OMAP2420_EN_IVA_COP				(1 << 10)
+#define OMAP2420_EN_IVA_MPU_SHIFT			8
+#define OMAP2420_EN_IVA_MPU				(1 << 8)
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP_SHIFT		0
+#define OMAP24XX_CM_FCLKEN_DSP_EN_DSP			(1 << 0)
+
+/* CM_ICLKEN_DSP */
+#define OMAP2420_EN_DSP_IPI_SHIFT			1
+#define OMAP2420_EN_DSP_IPI				(1 << 1)
+
+/* CM_IDLEST_DSP */
+#define OMAP2420_ST_IVA					(1 << 8)
+#define OMAP2420_ST_IPI					(1 << 1)
+#define OMAP24XX_ST_DSP					(1 << 0)
+
+/* CM_AUTOIDLE_DSP */
+#define OMAP2420_AUTO_DSP_IPI				(1 << 1)
+
+/* CM_CLKSEL_DSP */
+#define OMAP2420_SYNC_IVA				(1 << 13)
+#define OMAP2420_CLKSEL_IVA_SHIFT			8
+#define OMAP2420_CLKSEL_IVA_MASK			(0x1f << 8)
+#define OMAP24XX_SYNC_DSP				(1 << 7)
+#define OMAP24XX_CLKSEL_DSP_IF_SHIFT			5
+#define OMAP24XX_CLKSEL_DSP_IF_MASK			(0x3 << 5)
+#define OMAP24XX_CLKSEL_DSP_SHIFT			0
+#define OMAP24XX_CLKSEL_DSP_MASK			(0x1f << 0)
+
+/* CM_CLKSTCTRL_DSP */
+#define OMAP2420_AUTOSTATE_IVA				(1 << 8)
+#define OMAP24XX_AUTOSTATE_DSP				(1 << 0)
+
+/* CM_FCLKEN_MDM */
+/* 2430 only */
+#define OMAP2430_EN_OSC_SHIFT				1
+#define OMAP2430_EN_OSC					(1 << 1)
+
+/* CM_ICLKEN_MDM */
+/* 2430 only */
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM_SHIFT		0
+#define OMAP2430_CM_ICLKEN_MDM_EN_MDM			(1 << 0)
+
+/* CM_IDLEST_MDM specific bits */
+/* 2430 only */
+
+/* CM_AUTOIDLE_MDM */
+/* 2430 only */
+#define OMAP2430_AUTO_OSC				(1 << 1)
+#define OMAP2430_AUTO_MDM				(1 << 0)
+
+/* CM_CLKSEL_MDM */
+/* 2430 only */
+#define OMAP2430_SYNC_MDM				(1 << 4)
+#define OMAP2430_CLKSEL_MDM_SHIFT			0
+#define OMAP2430_CLKSEL_MDM_MASK			(0xf << 0)
+
+/* CM_CLKSTCTRL_MDM */
+/* 2430 only */
+#define OMAP2430_AUTOSTATE_MDM				(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
new file mode 100644
index 000000000000..9249129a5f46
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -0,0 +1,673 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_34XX_H
+
+/*
+ * OMAP3430 Clock Management register bits
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cm.h"
+
+/* Bits shared between registers */
+
+/* CM_FCLKEN1_CORE and CM_ICLKEN1_CORE shared bits */
+#define OMAP3430ES2_EN_MMC3_MASK			(1 << 30)
+#define OMAP3430ES2_EN_MMC3_SHIFT			30
+#define OMAP3430_EN_MSPRO				(1 << 23)
+#define OMAP3430_EN_MSPRO_SHIFT				23
+#define OMAP3430_EN_HDQ					(1 << 22)
+#define OMAP3430_EN_HDQ_SHIFT				22
+#define OMAP3430ES1_EN_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430ES1_EN_D2D				(1 << 3)
+#define OMAP3430ES1_EN_D2D_SHIFT			3
+#define OMAP3430_EN_SSI					(1 << 0)
+#define OMAP3430_EN_SSI_SHIFT				0
+
+/* CM_FCLKEN3_CORE and CM_ICLKEN3_CORE shared bits */
+#define OMAP3430ES2_EN_USBTLL_SHIFT			2
+#define OMAP3430ES2_EN_USBTLL_MASK			(1 << 2)
+
+/* CM_FCLKEN_WKUP and CM_ICLKEN_WKUP shared bits */
+#define OMAP3430_EN_WDT2				(1 << 5)
+#define OMAP3430_EN_WDT2_SHIFT				5
+
+/* CM_ICLKEN_CAM, CM_FCLKEN_CAM shared bits */
+#define OMAP3430_EN_CAM					(1 << 0)
+#define OMAP3430_EN_CAM_SHIFT				0
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER shared bits */
+#define OMAP3430_EN_WDT3				(1 << 12)
+#define OMAP3430_EN_WDT3_SHIFT				12
+
+/* CM_CLKSEL2_EMU, CM_CLKSEL3_EMU shared bits */
+#define OMAP3430_OVERRIDE_ENABLE			(1 << 19)
+
+
+/* Bits specific to each register */
+
+/* CM_FCLKEN_IVA2 */
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2			(1 << 0)
+
+/* CM_CLKEN_PLL_IVA2 */
+#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_IVA2_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430_IVA2_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_IVA2_DPLL_SHIFT			0
+#define OMAP3430_EN_IVA2_DPLL_MASK			(0x7 << 0)
+
+/* CM_IDLEST_IVA2 */
+#define OMAP3430_ST_IVA2				(1 << 0)
+
+/* CM_IDLEST_PLL_IVA2 */
+#define OMAP3430_ST_IVA2_CLK				(1 << 0)
+
+/* CM_AUTOIDLE_PLL_IVA2 */
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT			0
+#define OMAP3430_AUTO_IVA2_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL_IVA2 */
+#define OMAP3430_IVA2_CLK_SRC_SHIFT			19
+#define OMAP3430_IVA2_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_IVA2_DPLL_MULT_SHIFT			8
+#define OMAP3430_IVA2_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_IVA2_DPLL_DIV_SHIFT			0
+#define OMAP3430_IVA2_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL2_PLL_IVA2 */
+#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_SHIFT		0
+#define OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
+
+/* CM_CLKSTCTRL_IVA2 */
+#define OMAP3430_CLKTRCTRL_IVA2_SHIFT			0
+#define OMAP3430_CLKTRCTRL_IVA2_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_IVA2 */
+#define OMAP3430_CLKACTIVITY_IVA2			(1 << 0)
+
+/* CM_REVISION specific bits */
+
+/* CM_SYSCONFIG specific bits */
+
+/* CM_CLKEN_PLL_MPU */
+#define OMAP3430_MPU_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_MPU_DPLL_RAMPTIME_MASK			(0x3 << 8)
+#define OMAP3430_MPU_DPLL_FREQSEL_SHIFT			4
+#define OMAP3430_MPU_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_MPU_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_MPU_DPLL_SHIFT			0
+#define OMAP3430_EN_MPU_DPLL_MASK			(0x7 << 0)
+
+/* CM_IDLEST_MPU */
+#define OMAP3430_ST_MPU					(1 << 0)
+
+/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK				(1 << 0)
+#define OMAP3430_ST_IVA2_CLK_MASK			(1 << 0)
+
+/* CM_IDLEST_PLL_MPU */
+#define OMAP3430_ST_MPU_CLK_MASK			(1 << 0)
+
+/* CM_AUTOIDLE_PLL_MPU */
+#define OMAP3430_AUTO_MPU_DPLL_SHIFT			0
+#define OMAP3430_AUTO_MPU_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL_MPU */
+#define OMAP3430_MPU_CLK_SRC_SHIFT			19
+#define OMAP3430_MPU_CLK_SRC_MASK			(0x3 << 19)
+#define OMAP3430_MPU_DPLL_MULT_SHIFT			8
+#define OMAP3430_MPU_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_MPU_DPLL_DIV_SHIFT			0
+#define OMAP3430_MPU_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL2_PLL_MPU */
+#define OMAP3430_MPU_DPLL_CLKOUT_DIV_SHIFT		0
+#define OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK		(0x1f << 0)
+
+/* CM_CLKSTCTRL_MPU */
+#define OMAP3430_CLKTRCTRL_MPU_SHIFT			0
+#define OMAP3430_CLKTRCTRL_MPU_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_MPU */
+#define OMAP3430_CLKACTIVITY_MPU			(1 << 0)
+
+/* CM_FCLKEN1_CORE specific bits */
+
+/* CM_ICLKEN1_CORE specific bits */
+#define OMAP3430_EN_ICR					(1 << 29)
+#define OMAP3430_EN_ICR_SHIFT				29
+#define OMAP3430_EN_AES2				(1 << 28)
+#define OMAP3430_EN_AES2_SHIFT				28
+#define OMAP3430_EN_SHA12				(1 << 27)
+#define OMAP3430_EN_SHA12_SHIFT				27
+#define OMAP3430_EN_DES2				(1 << 26)
+#define OMAP3430_EN_DES2_SHIFT				26
+#define OMAP3430ES1_EN_FAC				(1 << 8)
+#define OMAP3430ES1_EN_FAC_SHIFT			8
+#define OMAP3430_EN_MAILBOXES				(1 << 7)
+#define OMAP3430_EN_MAILBOXES_SHIFT			7
+#define OMAP3430_EN_OMAPCTRL				(1 << 6)
+#define OMAP3430_EN_OMAPCTRL_SHIFT			6
+#define OMAP3430_EN_SDRC				(1 << 1)
+#define OMAP3430_EN_SDRC_SHIFT				1
+
+/* CM_ICLKEN2_CORE */
+#define OMAP3430_EN_PKA					(1 << 4)
+#define OMAP3430_EN_PKA_SHIFT				4
+#define OMAP3430_EN_AES1				(1 << 3)
+#define OMAP3430_EN_AES1_SHIFT				3
+#define OMAP3430_EN_RNG					(1 << 2)
+#define OMAP3430_EN_RNG_SHIFT				2
+#define OMAP3430_EN_SHA11				(1 << 1)
+#define OMAP3430_EN_SHA11_SHIFT				1
+#define OMAP3430_EN_DES1				(1 << 0)
+#define OMAP3430_EN_DES1_SHIFT				0
+
+/* CM_FCLKEN3_CORE specific bits */
+#define OMAP3430ES2_EN_TS_SHIFT				1
+#define OMAP3430ES2_EN_TS_MASK				(1 << 1)
+#define OMAP3430ES2_EN_CPEFUSE_SHIFT			0
+#define OMAP3430ES2_EN_CPEFUSE_MASK			(1 << 0)
+
+/* CM_IDLEST1_CORE specific bits */
+#define OMAP3430_ST_ICR					(1 << 29)
+#define OMAP3430_ST_AES2				(1 << 28)
+#define OMAP3430_ST_SHA12				(1 << 27)
+#define OMAP3430_ST_DES2				(1 << 26)
+#define OMAP3430_ST_MSPRO				(1 << 23)
+#define OMAP3430_ST_HDQ					(1 << 22)
+#define OMAP3430ES1_ST_FAC				(1 << 8)
+#define OMAP3430ES1_ST_MAILBOXES			(1 << 7)
+#define OMAP3430_ST_OMAPCTRL				(1 << 6)
+#define OMAP3430_ST_SDMA				(1 << 2)
+#define OMAP3430_ST_SDRC				(1 << 1)
+#define OMAP3430_ST_SSI					(1 << 0)
+
+/* CM_IDLEST2_CORE */
+#define OMAP3430_ST_PKA					(1 << 4)
+#define OMAP3430_ST_AES1				(1 << 3)
+#define OMAP3430_ST_RNG					(1 << 2)
+#define OMAP3430_ST_SHA11				(1 << 1)
+#define OMAP3430_ST_DES1				(1 << 0)
+
+/* CM_IDLEST3_CORE */
+#define OMAP3430ES2_ST_USBTLL_SHIFT			2
+#define OMAP3430ES2_ST_USBTLL_MASK			(1 << 2)
+
+/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_AES2				(1 << 28)
+#define OMAP3430_AUTO_AES2_SHIFT			28
+#define OMAP3430_AUTO_SHA12				(1 << 27)
+#define OMAP3430_AUTO_SHA12_SHIFT			27
+#define OMAP3430_AUTO_DES2				(1 << 26)
+#define OMAP3430_AUTO_DES2_SHIFT			26
+#define OMAP3430_AUTO_MMC2				(1 << 25)
+#define OMAP3430_AUTO_MMC2_SHIFT			25
+#define OMAP3430_AUTO_MMC1				(1 << 24)
+#define OMAP3430_AUTO_MMC1_SHIFT			24
+#define OMAP3430_AUTO_MSPRO				(1 << 23)
+#define OMAP3430_AUTO_MSPRO_SHIFT			23
+#define OMAP3430_AUTO_HDQ				(1 << 22)
+#define OMAP3430_AUTO_HDQ_SHIFT				22
+#define OMAP3430_AUTO_MCSPI4				(1 << 21)
+#define OMAP3430_AUTO_MCSPI4_SHIFT			21
+#define OMAP3430_AUTO_MCSPI3				(1 << 20)
+#define OMAP3430_AUTO_MCSPI3_SHIFT			20
+#define OMAP3430_AUTO_MCSPI2				(1 << 19)
+#define OMAP3430_AUTO_MCSPI2_SHIFT			19
+#define OMAP3430_AUTO_MCSPI1				(1 << 18)
+#define OMAP3430_AUTO_MCSPI1_SHIFT			18
+#define OMAP3430_AUTO_I2C3				(1 << 17)
+#define OMAP3430_AUTO_I2C3_SHIFT			17
+#define OMAP3430_AUTO_I2C2				(1 << 16)
+#define OMAP3430_AUTO_I2C2_SHIFT			16
+#define OMAP3430_AUTO_I2C1				(1 << 15)
+#define OMAP3430_AUTO_I2C1_SHIFT			15
+#define OMAP3430_AUTO_UART2				(1 << 14)
+#define OMAP3430_AUTO_UART2_SHIFT			14
+#define OMAP3430_AUTO_UART1				(1 << 13)
+#define OMAP3430_AUTO_UART1_SHIFT			13
+#define OMAP3430_AUTO_GPT11				(1 << 12)
+#define OMAP3430_AUTO_GPT11_SHIFT			12
+#define OMAP3430_AUTO_GPT10				(1 << 11)
+#define OMAP3430_AUTO_GPT10_SHIFT			11
+#define OMAP3430_AUTO_MCBSP5				(1 << 10)
+#define OMAP3430_AUTO_MCBSP5_SHIFT			10
+#define OMAP3430_AUTO_MCBSP1				(1 << 9)
+#define OMAP3430_AUTO_MCBSP1_SHIFT			9
+#define OMAP3430ES1_AUTO_FAC				(1 << 8)
+#define OMAP3430ES1_AUTO_FAC_SHIFT			8
+#define OMAP3430_AUTO_MAILBOXES				(1 << 7)
+#define OMAP3430_AUTO_MAILBOXES_SHIFT			7
+#define OMAP3430_AUTO_OMAPCTRL				(1 << 6)
+#define OMAP3430_AUTO_OMAPCTRL_SHIFT			6
+#define OMAP3430ES1_AUTO_FSHOSTUSB			(1 << 5)
+#define OMAP3430ES1_AUTO_FSHOSTUSB_SHIFT		5
+#define OMAP3430_AUTO_HSOTGUSB				(1 << 4)
+#define OMAP3430_AUTO_HSOTGUSB_SHIFT			4
+#define OMAP3430ES1_AUTO_D2D				(1 << 3)
+#define OMAP3430ES1_AUTO_D2D_SHIFT			3
+#define OMAP3430_AUTO_SSI				(1 << 0)
+#define OMAP3430_AUTO_SSI_SHIFT				0
+
+/* CM_AUTOIDLE2_CORE */
+#define OMAP3430_AUTO_PKA				(1 << 4)
+#define OMAP3430_AUTO_PKA_SHIFT				4
+#define OMAP3430_AUTO_AES1				(1 << 3)
+#define OMAP3430_AUTO_AES1_SHIFT			3
+#define OMAP3430_AUTO_RNG				(1 << 2)
+#define OMAP3430_AUTO_RNG_SHIFT				2
+#define OMAP3430_AUTO_SHA11				(1 << 1)
+#define OMAP3430_AUTO_SHA11_SHIFT			1
+#define OMAP3430_AUTO_DES1				(1 << 0)
+#define OMAP3430_AUTO_DES1_SHIFT			0
+
+/* CM_AUTOIDLE3_CORE */
+#define OMAP3430ES2_AUTO_USBTLL_SHIFT			2
+#define OMAP3430ES2_AUTO_USBTLL_MASK			(1 << 2)
+
+/* CM_CLKSEL_CORE */
+#define OMAP3430_CLKSEL_SSI_SHIFT			8
+#define OMAP3430_CLKSEL_SSI_MASK			(0xf << 8)
+#define OMAP3430_CLKSEL_GPT11_MASK			(1 << 7)
+#define OMAP3430_CLKSEL_GPT11_SHIFT			7
+#define OMAP3430_CLKSEL_GPT10_MASK			(1 << 6)
+#define OMAP3430_CLKSEL_GPT10_SHIFT			6
+#define OMAP3430ES1_CLKSEL_FSHOSTUSB_SHIFT		4
+#define OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK		(0x3 << 4)
+#define OMAP3430_CLKSEL_L4_SHIFT			2
+#define OMAP3430_CLKSEL_L4_MASK				(0x3 << 2)
+#define OMAP3430_CLKSEL_L3_SHIFT			0
+#define OMAP3430_CLKSEL_L3_MASK				(0x3 << 0)
+
+/* CM_CLKSTCTRL_CORE */
+#define OMAP3430ES1_CLKTRCTRL_D2D_SHIFT			4
+#define OMAP3430ES1_CLKTRCTRL_D2D_MASK			(0x3 << 4)
+#define OMAP3430_CLKTRCTRL_L4_SHIFT			2
+#define OMAP3430_CLKTRCTRL_L4_MASK			(0x3 << 2)
+#define OMAP3430_CLKTRCTRL_L3_SHIFT			0
+#define OMAP3430_CLKTRCTRL_L3_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_CORE */
+#define OMAP3430ES1_CLKACTIVITY_D2D			(1 << 2)
+#define OMAP3430_CLKACTIVITY_L4				(1 << 1)
+#define OMAP3430_CLKACTIVITY_L3				(1 << 0)
+
+/* CM_FCLKEN_GFX */
+#define OMAP3430ES1_EN_3D				(1 << 2)
+#define OMAP3430ES1_EN_3D_SHIFT				2
+#define OMAP3430ES1_EN_2D				(1 << 1)
+#define OMAP3430ES1_EN_2D_SHIFT				1
+
+/* CM_ICLKEN_GFX specific bits */
+
+/* CM_IDLEST_GFX specific bits */
+
+/* CM_CLKSEL_GFX specific bits */
+
+/* CM_SLEEPDEP_GFX specific bits */
+
+/* CM_CLKSTCTRL_GFX */
+#define OMAP3430ES1_CLKTRCTRL_GFX_SHIFT			0
+#define OMAP3430ES1_CLKTRCTRL_GFX_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_GFX */
+#define OMAP3430ES1_CLKACTIVITY_GFX			(1 << 0)
+
+/* CM_FCLKEN_SGX */
+#define OMAP3430ES2_EN_SGX_SHIFT			1
+#define OMAP3430ES2_EN_SGX_MASK				(1 << 1)
+
+/* CM_CLKSEL_SGX */
+#define OMAP3430ES2_CLKSEL_SGX_SHIFT			0
+#define OMAP3430ES2_CLKSEL_SGX_MASK			(0x7 << 0)
+
+/* CM_FCLKEN_WKUP specific bits */
+#define OMAP3430ES2_EN_USIMOCP_SHIFT			9
+
+/* CM_ICLKEN_WKUP specific bits */
+#define OMAP3430_EN_WDT1				(1 << 4)
+#define OMAP3430_EN_WDT1_SHIFT				4
+#define OMAP3430_EN_32KSYNC				(1 << 2)
+#define OMAP3430_EN_32KSYNC_SHIFT			2
+
+/* CM_IDLEST_WKUP specific bits */
+#define OMAP3430_ST_WDT2				(1 << 5)
+#define OMAP3430_ST_WDT1				(1 << 4)
+#define OMAP3430_ST_32KSYNC				(1 << 2)
+
+/* CM_AUTOIDLE_WKUP */
+#define OMAP3430_AUTO_WDT2				(1 << 5)
+#define OMAP3430_AUTO_WDT2_SHIFT			5
+#define OMAP3430_AUTO_WDT1				(1 << 4)
+#define OMAP3430_AUTO_WDT1_SHIFT			4
+#define OMAP3430_AUTO_GPIO1				(1 << 3)
+#define OMAP3430_AUTO_GPIO1_SHIFT			3
+#define OMAP3430_AUTO_32KSYNC				(1 << 2)
+#define OMAP3430_AUTO_32KSYNC_SHIFT			2
+#define OMAP3430_AUTO_GPT12				(1 << 1)
+#define OMAP3430_AUTO_GPT12_SHIFT			1
+#define OMAP3430_AUTO_GPT1				(1 << 0)
+#define OMAP3430_AUTO_GPT1_SHIFT			0
+
+/* CM_CLKSEL_WKUP */
+#define OMAP3430ES2_CLKSEL_USIMOCP_MASK			(0xf << 3)
+#define OMAP3430_CLKSEL_RM_SHIFT			1
+#define OMAP3430_CLKSEL_RM_MASK				(0x3 << 1)
+#define OMAP3430_CLKSEL_GPT1_SHIFT			0
+#define OMAP3430_CLKSEL_GPT1_MASK			(1 << 0)
+
+/* CM_CLKEN_PLL */
+#define OMAP3430_PWRDN_EMU_PERIPH_SHIFT			31
+#define OMAP3430_PWRDN_CAM_SHIFT			30
+#define OMAP3430_PWRDN_DSS1_SHIFT			29
+#define OMAP3430_PWRDN_TV_SHIFT				28
+#define OMAP3430_PWRDN_96M_SHIFT			27
+#define OMAP3430_PERIPH_DPLL_RAMPTIME_SHIFT		24
+#define OMAP3430_PERIPH_DPLL_RAMPTIME_MASK		(0x3 << 24)
+#define OMAP3430_PERIPH_DPLL_FREQSEL_SHIFT		20
+#define OMAP3430_PERIPH_DPLL_FREQSEL_MASK		(0xf << 20)
+#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT	19
+#define OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_MASK		(1 << 19)
+#define OMAP3430_EN_PERIPH_DPLL_SHIFT			16
+#define OMAP3430_EN_PERIPH_DPLL_MASK			(0x7 << 16)
+#define OMAP3430_PWRDN_EMU_CORE_SHIFT			12
+#define OMAP3430_CORE_DPLL_RAMPTIME_SHIFT		8
+#define OMAP3430_CORE_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430_CORE_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430_CORE_DPLL_FREQSEL_MASK			(0xf << 4)
+#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT		3
+#define OMAP3430_EN_CORE_DPLL_DRIFTGUARD_MASK		(1 << 3)
+#define OMAP3430_EN_CORE_DPLL_SHIFT			0
+#define OMAP3430_EN_CORE_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKEN2_PLL */
+#define OMAP3430ES2_EN_PERIPH2_DPLL_LPMODE_SHIFT		10
+#define OMAP3430ES2_PERIPH2_DPLL_RAMPTIME_MASK		(0x3 << 8)
+#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_SHIFT		4
+#define OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK		(0xf << 4)
+#define OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT	3
+#define OMAP3430ES2_EN_PERIPH2_DPLL_SHIFT		0
+#define OMAP3430ES2_EN_PERIPH2_DPLL_MASK		(0x7 << 0)
+
+/* CM_IDLEST_CKGEN */
+#define OMAP3430_ST_54M_CLK				(1 << 5)
+#define OMAP3430_ST_12M_CLK				(1 << 4)
+#define OMAP3430_ST_48M_CLK				(1 << 3)
+#define OMAP3430_ST_96M_CLK				(1 << 2)
+#define OMAP3430_ST_PERIPH_CLK				(1 << 1)
+#define OMAP3430_ST_CORE_CLK				(1 << 0)
+
+/* CM_IDLEST2_CKGEN */
+#define OMAP3430ES2_ST_120M_CLK_SHIFT			1
+#define OMAP3430ES2_ST_120M_CLK_MASK			(1 << 1)
+#define OMAP3430ES2_ST_PERIPH2_CLK_SHIFT		0
+#define OMAP3430ES2_ST_PERIPH2_CLK_MASK			(1 << 0)
+
+/* CM_AUTOIDLE_PLL */
+#define OMAP3430_AUTO_PERIPH_DPLL_SHIFT			3
+#define OMAP3430_AUTO_PERIPH_DPLL_MASK			(0x7 << 3)
+#define OMAP3430_AUTO_CORE_DPLL_SHIFT			0
+#define OMAP3430_AUTO_CORE_DPLL_MASK			(0x7 << 0)
+
+/* CM_CLKSEL1_PLL */
+/* Note that OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK was (0x3 << 27) on 3430ES1 */
+#define OMAP3430_CORE_DPLL_CLKOUT_DIV_SHIFT		27
+#define OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK		(0x1f << 27)
+#define OMAP3430_CORE_DPLL_MULT_SHIFT			16
+#define OMAP3430_CORE_DPLL_MULT_MASK			(0x7ff << 16)
+#define OMAP3430_CORE_DPLL_DIV_SHIFT			8
+#define OMAP3430_CORE_DPLL_DIV_MASK			(0x7f << 8)
+#define OMAP3430_SOURCE_54M				(1 << 5)
+#define OMAP3430_SOURCE_48M				(1 << 3)
+
+/* CM_CLKSEL2_PLL */
+#define OMAP3430_PERIPH_DPLL_MULT_SHIFT			8
+#define OMAP3430_PERIPH_DPLL_MULT_MASK			(0x7ff << 8)
+#define OMAP3430_PERIPH_DPLL_DIV_SHIFT			0
+#define OMAP3430_PERIPH_DPLL_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL3_PLL */
+#define OMAP3430_DIV_96M_SHIFT				0
+#define OMAP3430_DIV_96M_MASK				(0x1f << 0)
+
+/* CM_CLKSEL4_PLL */
+#define OMAP3430ES2_PERIPH2_DPLL_MULT_SHIFT		8
+#define OMAP3430ES2_PERIPH2_DPLL_MULT_MASK		(0x7ff << 8)
+#define OMAP3430ES2_PERIPH2_DPLL_DIV_SHIFT		0
+#define OMAP3430ES2_PERIPH2_DPLL_DIV_MASK		(0x7f << 0)
+
+/* CM_CLKSEL5_PLL */
+#define OMAP3430ES2_DIV_120M_SHIFT			0
+#define OMAP3430ES2_DIV_120M_MASK			(0x1f << 0)
+
+/* CM_CLKOUT_CTRL */
+#define OMAP3430_CLKOUT2_EN_SHIFT			7
+#define OMAP3430_CLKOUT2_EN				(1 << 7)
+#define OMAP3430_CLKOUT2_DIV_SHIFT			3
+#define OMAP3430_CLKOUT2_DIV_MASK			(0x7 << 3)
+#define OMAP3430_CLKOUT2SOURCE_SHIFT			0
+#define OMAP3430_CLKOUT2SOURCE_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_DSS */
+#define OMAP3430_EN_TV					(1 << 2)
+#define OMAP3430_EN_TV_SHIFT				2
+#define OMAP3430_EN_DSS2				(1 << 1)
+#define OMAP3430_EN_DSS2_SHIFT				1
+#define OMAP3430_EN_DSS1				(1 << 0)
+#define OMAP3430_EN_DSS1_SHIFT				0
+
+/* CM_ICLKEN_DSS */
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS			(1 << 0)
+#define OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT		0
+
+/* CM_IDLEST_DSS */
+#define OMAP3430_ST_DSS					(1 << 0)
+
+/* CM_AUTOIDLE_DSS */
+#define OMAP3430_AUTO_DSS				(1 << 0)
+#define OMAP3430_AUTO_DSS_SHIFT				0
+
+/* CM_CLKSEL_DSS */
+#define OMAP3430_CLKSEL_TV_SHIFT			8
+#define OMAP3430_CLKSEL_TV_MASK				(0x1f << 8)
+#define OMAP3430_CLKSEL_DSS1_SHIFT			0
+#define OMAP3430_CLKSEL_DSS1_MASK			(0x1f << 0)
+
+/* CM_SLEEPDEP_DSS specific bits */
+
+/* CM_CLKSTCTRL_DSS */
+#define OMAP3430_CLKTRCTRL_DSS_SHIFT			0
+#define OMAP3430_CLKTRCTRL_DSS_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_DSS */
+#define OMAP3430_CLKACTIVITY_DSS			(1 << 0)
+
+/* CM_FCLKEN_CAM specific bits */
+
+/* CM_ICLKEN_CAM specific bits */
+
+/* CM_IDLEST_CAM */
+#define OMAP3430_ST_CAM					(1 << 0)
+
+/* CM_AUTOIDLE_CAM */
+#define OMAP3430_AUTO_CAM				(1 << 0)
+#define OMAP3430_AUTO_CAM_SHIFT				0
+
+/* CM_CLKSEL_CAM */
+#define OMAP3430_CLKSEL_CAM_SHIFT			0
+#define OMAP3430_CLKSEL_CAM_MASK			(0x1f << 0)
+
+/* CM_SLEEPDEP_CAM specific bits */
+
+/* CM_CLKSTCTRL_CAM */
+#define OMAP3430_CLKTRCTRL_CAM_SHIFT			0
+#define OMAP3430_CLKTRCTRL_CAM_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_CAM */
+#define OMAP3430_CLKACTIVITY_CAM			(1 << 0)
+
+/* CM_FCLKEN_PER specific bits */
+
+/* CM_ICLKEN_PER specific bits */
+
+/* CM_IDLEST_PER */
+#define OMAP3430_ST_WDT3				(1 << 12)
+#define OMAP3430_ST_MCBSP4				(1 << 2)
+#define OMAP3430_ST_MCBSP3				(1 << 1)
+#define OMAP3430_ST_MCBSP2				(1 << 0)
+
+/* CM_AUTOIDLE_PER */
+#define OMAP3430_AUTO_GPIO6				(1 << 17)
+#define OMAP3430_AUTO_GPIO6_SHIFT			17
+#define OMAP3430_AUTO_GPIO5				(1 << 16)
+#define OMAP3430_AUTO_GPIO5_SHIFT			16
+#define OMAP3430_AUTO_GPIO4				(1 << 15)
+#define OMAP3430_AUTO_GPIO4_SHIFT			15
+#define OMAP3430_AUTO_GPIO3				(1 << 14)
+#define OMAP3430_AUTO_GPIO3_SHIFT			14
+#define OMAP3430_AUTO_GPIO2				(1 << 13)
+#define OMAP3430_AUTO_GPIO2_SHIFT			13
+#define OMAP3430_AUTO_WDT3				(1 << 12)
+#define OMAP3430_AUTO_WDT3_SHIFT			12
+#define OMAP3430_AUTO_UART3				(1 << 11)
+#define OMAP3430_AUTO_UART3_SHIFT			11
+#define OMAP3430_AUTO_GPT9				(1 << 10)
+#define OMAP3430_AUTO_GPT9_SHIFT			10
+#define OMAP3430_AUTO_GPT8				(1 << 9)
+#define OMAP3430_AUTO_GPT8_SHIFT			9
+#define OMAP3430_AUTO_GPT7				(1 << 8)
+#define OMAP3430_AUTO_GPT7_SHIFT			8
+#define OMAP3430_AUTO_GPT6				(1 << 7)
+#define OMAP3430_AUTO_GPT6_SHIFT			7
+#define OMAP3430_AUTO_GPT5				(1 << 6)
+#define OMAP3430_AUTO_GPT5_SHIFT			6
+#define OMAP3430_AUTO_GPT4				(1 << 5)
+#define OMAP3430_AUTO_GPT4_SHIFT			5
+#define OMAP3430_AUTO_GPT3				(1 << 4)
+#define OMAP3430_AUTO_GPT3_SHIFT			4
+#define OMAP3430_AUTO_GPT2				(1 << 3)
+#define OMAP3430_AUTO_GPT2_SHIFT			3
+#define OMAP3430_AUTO_MCBSP4				(1 << 2)
+#define OMAP3430_AUTO_MCBSP4_SHIFT			2
+#define OMAP3430_AUTO_MCBSP3				(1 << 1)
+#define OMAP3430_AUTO_MCBSP3_SHIFT			1
+#define OMAP3430_AUTO_MCBSP2				(1 << 0)
+#define OMAP3430_AUTO_MCBSP2_SHIFT			0
+
+/* CM_CLKSEL_PER */
+#define OMAP3430_CLKSEL_GPT9_MASK			(1 << 7)
+#define OMAP3430_CLKSEL_GPT9_SHIFT			7
+#define OMAP3430_CLKSEL_GPT8_MASK			(1 << 6)
+#define OMAP3430_CLKSEL_GPT8_SHIFT			6
+#define OMAP3430_CLKSEL_GPT7_MASK			(1 << 5)
+#define OMAP3430_CLKSEL_GPT7_SHIFT			5
+#define OMAP3430_CLKSEL_GPT6_MASK			(1 << 4)
+#define OMAP3430_CLKSEL_GPT6_SHIFT			4
+#define OMAP3430_CLKSEL_GPT5_MASK			(1 << 3)
+#define OMAP3430_CLKSEL_GPT5_SHIFT			3
+#define OMAP3430_CLKSEL_GPT4_MASK			(1 << 2)
+#define OMAP3430_CLKSEL_GPT4_SHIFT			2
+#define OMAP3430_CLKSEL_GPT3_MASK			(1 << 1)
+#define OMAP3430_CLKSEL_GPT3_SHIFT			1
+#define OMAP3430_CLKSEL_GPT2_MASK			(1 << 0)
+#define OMAP3430_CLKSEL_GPT2_SHIFT			0
+
+/* CM_SLEEPDEP_PER specific bits */
+#define OMAP3430_CM_SLEEPDEP_PER_EN_IVA2		(1 << 2)
+
+/* CM_CLKSTCTRL_PER */
+#define OMAP3430_CLKTRCTRL_PER_SHIFT			0
+#define OMAP3430_CLKTRCTRL_PER_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_PER */
+#define OMAP3430_CLKACTIVITY_PER			(1 << 0)
+
+/* CM_CLKSEL1_EMU */
+#define OMAP3430_DIV_DPLL4_SHIFT			24
+#define OMAP3430_DIV_DPLL4_MASK				(0x1f << 24)
+#define OMAP3430_DIV_DPLL3_SHIFT			16
+#define OMAP3430_DIV_DPLL3_MASK				(0x1f << 16)
+#define OMAP3430_CLKSEL_TRACECLK_SHIFT			11
+#define OMAP3430_CLKSEL_TRACECLK_MASK			(0x7 << 11)
+#define OMAP3430_CLKSEL_PCLK_SHIFT			8
+#define OMAP3430_CLKSEL_PCLK_MASK			(0x7 << 8)
+#define OMAP3430_CLKSEL_PCLKX2_SHIFT			6
+#define OMAP3430_CLKSEL_PCLKX2_MASK			(0x3 << 6)
+#define OMAP3430_CLKSEL_ATCLK_SHIFT			4
+#define OMAP3430_CLKSEL_ATCLK_MASK			(0x3 << 4)
+#define OMAP3430_TRACE_MUX_CTRL_SHIFT			2
+#define OMAP3430_TRACE_MUX_CTRL_MASK			(0x3 << 2)
+#define OMAP3430_MUX_CTRL_SHIFT				0
+#define OMAP3430_MUX_CTRL_MASK				(0x3 << 0)
+
+/* CM_CLKSTCTRL_EMU */
+#define OMAP3430_CLKTRCTRL_EMU_SHIFT			0
+#define OMAP3430_CLKTRCTRL_EMU_MASK			(0x3 << 0)
+
+/* CM_CLKSTST_EMU */
+#define OMAP3430_CLKACTIVITY_EMU			(1 << 0)
+
+/* CM_CLKSEL2_EMU specific bits */
+#define OMAP3430_CORE_DPLL_EMU_MULT_SHIFT		8
+#define OMAP3430_CORE_DPLL_EMU_MULT_MASK		(0x7ff << 8)
+#define OMAP3430_CORE_DPLL_EMU_DIV_SHIFT		0
+#define OMAP3430_CORE_DPLL_EMU_DIV_MASK			(0x7f << 0)
+
+/* CM_CLKSEL3_EMU specific bits */
+#define OMAP3430_PERIPH_DPLL_EMU_MULT_SHIFT		8
+#define OMAP3430_PERIPH_DPLL_EMU_MULT_MASK		(0x7ff << 8)
+#define OMAP3430_PERIPH_DPLL_EMU_DIV_SHIFT		0
+#define OMAP3430_PERIPH_DPLL_EMU_DIV_MASK		(0x7f << 0)
+
+/* CM_POLCTRL */
+#define OMAP3430_CLKOUT2_POL				(1 << 0)
+
+/* CM_IDLEST_NEON */
+#define OMAP3430_ST_NEON				(1 << 0)
+
+/* CM_CLKSTCTRL_NEON */
+#define OMAP3430_CLKTRCTRL_NEON_SHIFT			0
+#define OMAP3430_CLKTRCTRL_NEON_MASK			(0x3 << 0)
+
+/* CM_FCLKEN_USBHOST */
+#define OMAP3430ES2_EN_USBHOST2_SHIFT			1
+#define OMAP3430ES2_EN_USBHOST2_MASK			(1 << 1)
+#define OMAP3430ES2_EN_USBHOST1_SHIFT			0
+#define OMAP3430ES2_EN_USBHOST1_MASK			(1 << 0)
+
+/* CM_ICLKEN_USBHOST */
+#define OMAP3430ES2_EN_USBHOST_SHIFT			0
+#define OMAP3430ES2_EN_USBHOST_MASK			(1 << 0)
+
+/* CM_IDLEST_USBHOST */
+
+/* CM_AUTOIDLE_USBHOST */
+#define OMAP3430ES2_AUTO_USBHOST_SHIFT			0
+#define OMAP3430ES2_AUTO_USBHOST_MASK			(1 << 0)
+
+/* CM_SLEEPDEP_USBHOST */
+#define OMAP3430ES2_EN_MPU_SHIFT			1
+#define OMAP3430ES2_EN_MPU_MASK				(1 << 1)
+#define OMAP3430ES2_EN_IVA2_SHIFT			2
+#define OMAP3430ES2_EN_IVA2_MASK			(1 << 2)
+
+/* CM_CLKSTCTRL_USBHOST */
+#define OMAP3430ES2_CLKTRCTRL_USBHOST_SHIFT		0
+#define OMAP3430ES2_CLKTRCTRL_USBHOST_MASK		(3 << 0)
+
+
+
+#endif
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
new file mode 100644
index 000000000000..8489f3029fed
--- /dev/null
+++ b/arch/arm/mach-omap2/cm.h
@@ -0,0 +1,124 @@
+#ifndef __ARCH_ASM_MACH_OMAP2_CM_H
+#define __ARCH_ASM_MACH_OMAP2_CM_H
+
+/*
+ * OMAP2/3 Clock Management (CM) register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prcm-common.h"
+
+#ifndef __ASSEMBLER__
+#define OMAP_CM_REGADDR(module, reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
+#else
+#define OMAP2420_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+#define OMAP2430_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+#define OMAP34XX_CM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+#endif
+
+/*
+ * Architecture-specific global CM registers
+ * Use cm_{read,write}_reg() with these registers.
+ * These registers appear once per CM module.
+ */
+
+#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+
+#define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific CM registers from CM_BASE + domain offset
+ * Use cm_{read,write}_mod_reg() with these registers.
+ * These register offsets generally appear in more than one PRCM submodule.
+ */
+
+/* Common between 24xx and 34xx */
+
+#define CM_FCLKEN					0x0000
+#define CM_FCLKEN1					CM_FCLKEN
+#define CM_CLKEN					CM_FCLKEN
+#define CM_ICLKEN					0x0010
+#define CM_ICLKEN1					CM_ICLKEN
+#define CM_ICLKEN2					0x0014
+#define CM_ICLKEN3					0x0018
+#define CM_IDLEST					0x0020
+#define CM_IDLEST1					CM_IDLEST
+#define CM_IDLEST2					0x0024
+#define CM_AUTOIDLE					0x0030
+#define CM_AUTOIDLE1					CM_AUTOIDLE
+#define CM_AUTOIDLE2					0x0034
+#define CM_AUTOIDLE3					0x0038
+#define CM_CLKSEL					0x0040
+#define CM_CLKSEL1					CM_CLKSEL
+#define CM_CLKSEL2					0x0044
+#define CM_CLKSTCTRL					0x0048
+
+
+/* Architecture-specific registers */
+
+#define OMAP24XX_CM_FCLKEN2				0x0004
+#define OMAP24XX_CM_ICLKEN4				0x001c
+#define OMAP24XX_CM_AUTOIDLE4				0x003c
+
+#define OMAP2430_CM_IDLEST3				0x0028
+
+#define OMAP3430_CM_CLKEN_PLL				0x0004
+#define OMAP3430ES2_CM_CLKEN2				0x0004
+#define OMAP3430ES2_CM_FCLKEN3				0x0008
+#define OMAP3430_CM_IDLEST_PLL				CM_IDLEST2
+#define OMAP3430_CM_AUTOIDLE_PLL			CM_AUTOIDLE2
+#define OMAP3430_CM_CLKSEL1				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL1_PLL				CM_CLKSEL
+#define OMAP3430_CM_CLKSEL2_PLL				CM_CLKSEL2
+#define OMAP3430_CM_SLEEPDEP				CM_CLKSEL2
+#define OMAP3430_CM_CLKSEL3				CM_CLKSTCTRL
+#define OMAP3430_CM_CLKSTST				0x004c
+#define OMAP3430ES2_CM_CLKSEL4				0x004c
+#define OMAP3430ES2_CM_CLKSEL5				0x0050
+#define OMAP3430_CM_CLKSEL2_EMU				0x0050
+#define OMAP3430_CM_CLKSEL3_EMU				0x0054
+
+
+/* Clock management domain register get/set */
+
+#ifndef __ASSEMBLER__
+static inline void cm_write_mod_reg(u32 val, s16 module, s16 idx)
+{
+	__raw_writel(val, OMAP_CM_REGADDR(module, idx));
+}
+
+static inline u32 cm_read_mod_reg(s16 module, s16 idx)
+{
+	return __raw_readl(OMAP_CM_REGADDR(module, idx));
+}
+#endif
+
+/* CM register bits shared between 24XX and 3430 */
+
+/* CM_CLKSEL_GFX */
+#define OMAP_CLKSEL_GFX_SHIFT				0
+#define OMAP_CLKSEL_GFX_MASK				(0x7 << 0)
+
+/* CM_ICLKEN_GFX */
+#define OMAP_EN_GFX_SHIFT				0
+#define OMAP_EN_GFX					(1 << 0)
+
+/* CM_IDLEST_GFX */
+#define OMAP_ST_GFX					(1 << 0)
+
+
+#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
new file mode 100644
index 000000000000..a5d86a49c213
--- /dev/null
+++ b/arch/arm/mach-omap2/control.c
@@ -0,0 +1,74 @@
+/*
+ * OMAP2/3 System Control Module register access
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/kernel.h>
+
+#include <asm/io.h>
+
+#include <asm/arch/control.h>
+
+static u32 omap2_ctrl_base;
+
+#define OMAP_CTRL_REGADDR(reg)	(void __iomem *)IO_ADDRESS(omap2_ctrl_base \
+								+ (reg))
+
+void omap_ctrl_base_set(u32 base)
+{
+	omap2_ctrl_base = base;
+}
+
+u32 omap_ctrl_base_get(void)
+{
+	return omap2_ctrl_base;
+}
+
+u8 omap_ctrl_readb(u16 offset)
+{
+	return __raw_readb(OMAP_CTRL_REGADDR(offset));
+}
+
+u16 omap_ctrl_readw(u16 offset)
+{
+	return __raw_readw(OMAP_CTRL_REGADDR(offset));
+}
+
+u32 omap_ctrl_readl(u16 offset)
+{
+	return __raw_readl(OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writeb(u8 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writeb: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writeb(val, OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writew(u16 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writew: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writew(val, OMAP_CTRL_REGADDR(offset));
+}
+
+void omap_ctrl_writel(u32 val, u16 offset)
+{
+	pr_debug("omap_ctrl_writel: writing 0x%0x to 0x%0x\n", val,
+		 (u32)OMAP_CTRL_REGADDR(offset));
+
+	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
+}
+
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 5a4cc2076a7d..02cede295e89 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -69,7 +69,7 @@ static void __iomem *gpmc_base =
 static void __iomem *gpmc_cs_base =
 	(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
 
-static struct clk *gpmc_l3_clk;
+static struct clk *gpmc_fck;
 
 static void gpmc_write_reg(int idx, u32 val)
 {
@@ -94,11 +94,10 @@ u32 gpmc_cs_read_reg(int cs, int idx)
 	return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
 }
 
-/* TODO: Add support for gpmc_fck to clock framework and use it */
 unsigned long gpmc_get_fclk_period(void)
 {
 	/* In picoseconds */
-	return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+	return 1000000000 / ((clk_get_rate(gpmc_fck)) / 1000);
 }
 
 unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
@@ -398,8 +397,11 @@ void __init gpmc_init(void)
 {
 	u32 l;
 
-	gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
-	BUG_ON(IS_ERR(gpmc_l3_clk));
+	gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
+	if (IS_ERR(gpmc_fck))
+		WARN_ON(1);
+	else
+		clk_enable(gpmc_fck);
 
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 5a4091f582ed..69c8174f3aac 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -42,6 +42,12 @@ static struct map_desc omap2_io_desc[] __initdata = {
 		.length		= L3_24XX_SIZE,
 		.type		= MT_DEVICE
 	},
+	{
+		.virtual        = L4_24XX_VIRT,
+		.pfn            = __phys_to_pfn(L4_24XX_PHYS),
+		.length         = L4_24XX_SIZE,
+		.type           = MT_DEVICE
+	},
 #ifdef CONFIG_ARCH_OMAP2430
 	{
 		.virtual	= L4_WK_243X_VIRT,
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 3e5d8cd4ea4f..12479081881a 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -27,11 +27,16 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 
-#include "prcm-regs.h"
+#include "prm.h"
+
 #include "memory.h"
+#include "sdrc.h"
 
+unsigned long omap2_sdrc_base;
+unsigned long omap2_sms_base;
 
 static struct memory_timings mem_timings;
+static u32 curr_perf_level = CORE_CLK_SRC_DPLL_X2;
 
 u32 omap2_memory_get_slow_dll_ctrl(void)
 {
@@ -48,12 +53,60 @@ u32 omap2_memory_get_type(void)
 	return mem_timings.m_type;
 }
 
+/*
+ * Check the DLL lock state, and return tue if running in unlock mode.
+ * This is needed to compensate for the shifted DLL value in unlock mode.
+ */
+u32 omap2_dll_force_needed(void)
+{
+	/* dlla and dllb are a set */
+	u32 dll_state = sdrc_read_reg(SDRC_DLLA_CTRL);
+
+	if ((dll_state & (1 << 2)) == (1 << 2))
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * 'level' is the value to store to CM_CLKSEL2_PLL.CORE_CLK_SRC.
+ * Practical values are CORE_CLK_SRC_DPLL (for CORE_CLK = DPLL_CLK) or
+ * CORE_CLK_SRC_DPLL_X2 (for CORE_CLK = * DPLL_CLK * 2)
+ */
+u32 omap2_reprogram_sdrc(u32 level, u32 force)
+{
+	u32 dll_ctrl, m_type;
+	u32 prev = curr_perf_level;
+	unsigned long flags;
+
+	if ((curr_perf_level == level) && !force)
+		return prev;
+
+	if (level == CORE_CLK_SRC_DPLL) {
+		dll_ctrl = omap2_memory_get_slow_dll_ctrl();
+	} else if (level == CORE_CLK_SRC_DPLL_X2) {
+		dll_ctrl = omap2_memory_get_fast_dll_ctrl();
+	} else {
+		return prev;
+	}
+
+	m_type = omap2_memory_get_type();
+
+	local_irq_save(flags);
+	__raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+	omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
+	curr_perf_level = level;
+	local_irq_restore(flags);
+
+	return prev;
+}
+
 void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 {
 	unsigned long dll_cnt;
 	u32 fast_dll = 0;
 
-	mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
+	mem_timings.m_type = !((sdrc_read_reg(SDRC_MR_0) & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
 
 	/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
 	 * In the case of 2422, its ok to use CS1 instead of CS0.
@@ -73,11 +126,11 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
 		mem_timings.dll_mode = M_LOCK;
 
 	if (mem_timings.base_cs == 0) {
-		fast_dll = SDRC_DLLA_CTRL;
-		dll_cnt = SDRC_DLLA_STATUS & 0xff00;
+		fast_dll = sdrc_read_reg(SDRC_DLLA_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLA_STATUS) & 0xff00;
 	} else {
-		fast_dll = SDRC_DLLB_CTRL;
-		dll_cnt = SDRC_DLLB_STATUS & 0xff00;
+		fast_dll = sdrc_read_reg(SDRC_DLLB_CTRL);
+		dll_cnt = sdrc_read_reg(SDRC_DLLB_STATUS) & 0xff00;
 	}
 	if (force_lock_to_unlock_mode) {
 		fast_dll &= ~0xff00;
@@ -106,14 +159,13 @@ void __init omap2_init_memory(void)
 {
 	u32 l;
 
-	l = SMS_SYSCONFIG;
+	l = sms_read_reg(SMS_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
-	SMS_SYSCONFIG = l;
+	sms_write_reg(l, SMS_SYSCONFIG);
 
-	l = SDRC_SYSCONFIG;
+	l = sdrc_read_reg(SDRC_SYSCONFIG);
 	l &= ~(0x3 << 3);
 	l |= (0x2 << 3);
-	SDRC_SYSCONFIG = l;
-
+	sdrc_write_reg(l, SDRC_SYSCONFIG);
 }
diff --git a/arch/arm/mach-omap2/memory.h b/arch/arm/mach-omap2/memory.h
index d212eea83a05..9a280b50a893 100644
--- a/arch/arm/mach-omap2/memory.h
+++ b/arch/arm/mach-omap2/memory.h
@@ -32,3 +32,5 @@ extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
 extern u32 omap2_memory_get_slow_dll_ctrl(void);
 extern u32 omap2_memory_get_fast_dll_ctrl(void);
 extern u32 omap2_memory_get_type(void);
+u32 omap2_dll_force_needed(void);
+u32 omap2_reprogram_sdrc(u32 level, u32 force);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 05750975d746..930770012a75 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -1,11 +1,12 @@
 /*
  * linux/arch/arm/mach-omap2/mux.c
  *
- * OMAP1 pin multiplexing configurations
+ * OMAP2 pin multiplexing configurations
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -28,13 +29,17 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
+static struct omap_mux_cfg arch_mux_cfg;
+
 /* NOTE: See mux.h for the enumeration */
 
-struct pin_config __initdata_or_module omap24xx_pins[] = {
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct pin_config __initdata_or_module omap24xx_pins[] = {
 /*
  *	description			mux	mux	pull	pull	debug
  *					offset	mode	ena	type
@@ -77,7 +82,12 @@ MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,	3,	0,	0,	1)
 MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,	3,	0,	0,	1)
 MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
 MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,	3,	0,	0,	1)
+MUX_CFG_24XX("N15_24XX_GPIO85",		0x103,	3,	0,	0,	1)
 MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
+MUX_CFG_24XX("P20_24XX_GPIO93",		0x10b,	3,	0,	0,	1)
+MUX_CFG_24XX("P18_24XX_GPIO95",		0x10d,	3,	0,	0,	1)
+MUX_CFG_24XX("M18_24XX_GPIO96",		0x10e,	3,	0,	0,	1)
+MUX_CFG_24XX("L14_24XX_GPIO97",		0x10f,	3,	0,	0,	1)
 MUX_CFG_24XX("J15_24XX_GPIO99",		0x113,	3,	1,	1,	1)
 MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
 MUX_CFG_24XX("P14_24XX_GPIO125",	0x140,	3,	1,	1,	1)
@@ -102,9 +112,6 @@ MUX_CFG_24XX("G4_242X_DMAREQ3",		0x073,	2,	0,	0,	1)
 MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,	2,	0,	0,	1)
 MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,	2,	0,	0,	1)
 
-/* TSC IRQ */
-MUX_CFG_24XX("P20_24XX_TSC_IRQ",	0x108,	0,	0,	0,	1)
-
 /* UART3 */
 MUX_CFG_24XX("K15_24XX_UART3_TX",	0x118,	0,	0,	0,	1)
 MUX_CFG_24XX("K14_24XX_UART3_RX",	0x119,	0,	0,	0,	1)
@@ -167,12 +174,108 @@ MUX_CFG_24XX("B3__24XX_KBR5",		0x30,	3,	1,	1,	1)
 MUX_CFG_24XX("AA4_24XX_KBC2",		0xe7,	3,	0,	0,	1)
 MUX_CFG_24XX("B13_24XX_KBC6",		0x110,	3,	0,	0,	1)
 
+/* 2430 USB */
+MUX_CFG_24XX("AD9_2430_USB0_PUEN",	0x133,	4,	0,	0,	1)
+MUX_CFG_24XX("Y11_2430_USB0_VP",	0x134,	4,	0,	0,	1)
+MUX_CFG_24XX("AD7_2430_USB0_VM",	0x135,	4,	0,	0,	1)
+MUX_CFG_24XX("AE7_2430_USB0_RCV",	0x136,	4,	0,	0,	1)
+MUX_CFG_24XX("AD4_2430_USB0_TXEN",	0x137,	4,	0,	0,	1)
+MUX_CFG_24XX("AF9_2430_USB0_SE0",	0x138,	4,	0,	0,	1)
+MUX_CFG_24XX("AE6_2430_USB0_DAT",	0x139,	4,	0,	0,	1)
+MUX_CFG_24XX("AD24_2430_USB1_SE0",	0x107,	2,	0,	0,	1)
+MUX_CFG_24XX("AB24_2430_USB1_RCV",	0x108,	2,	0,	0,	1)
+MUX_CFG_24XX("Y25_2430_USB1_TXEN",	0x109,	2,	0,	0,	1)
+MUX_CFG_24XX("AA26_2430_USB1_DAT",	0x10A,	2,	0,	0,	1)
+
+/* 2430 HS-USB */
+MUX_CFG_24XX("AD9_2430_USB0HS_DATA3",	0x133,	0,	0,	0,	1)
+MUX_CFG_24XX("Y11_2430_USB0HS_DATA4",	0x134,	0,	0,	0,	1)
+MUX_CFG_24XX("AD7_2430_USB0HS_DATA5",	0x135,	0,	0,	0,	1)
+MUX_CFG_24XX("AE7_2430_USB0HS_DATA6",	0x136,	0,	0,	0,	1)
+MUX_CFG_24XX("AD4_2430_USB0HS_DATA2",	0x137,	0,	0,	0,	1)
+MUX_CFG_24XX("AF9_2430_USB0HS_DATA0",	0x138,	0,	0,	0,	1)
+MUX_CFG_24XX("AE6_2430_USB0HS_DATA1",	0x139,	0,	0,	0,	1)
+MUX_CFG_24XX("AE8_2430_USB0HS_CLK",	0x13A,	0,	0,	0,	1)
+MUX_CFG_24XX("AD8_2430_USB0HS_DIR",	0x13B,	0,	0,	0,	1)
+MUX_CFG_24XX("AE5_2430_USB0HS_STP",	0x13c,	0,	1,	1,	1)
+MUX_CFG_24XX("AE9_2430_USB0HS_NXT",	0x13D,	0,	0,	0,	1)
+MUX_CFG_24XX("AC7_2430_USB0HS_DATA7",	0x13E,	0,	0,	0,	1)
+
+/* 2430 McBSP */
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX",	0x012E,	1,	0,	0,	1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX",	0x012F,	1,	0,	0,	1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX",	0x0130,	1,	0,	0,	1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR",	0x0131,	1,	0,	0,	1)
+MUX_CFG_24XX("AC10_2430_MCBSP2_FSX_OFF",0x012E,	0,	0,	0,	1)
+MUX_CFG_24XX("AD16_2430_MCBSP2_CLX_OFF",0x012F,	0,	0,	0,	1)
+MUX_CFG_24XX("AE13_2430_MCBSP2_DX_OFF",	0x0130,	0,	0,	0,	1)
+MUX_CFG_24XX("AD13_2430_MCBSP2_DR_OFF",	0x0131,	0,	0,	0,	1)
 };
 
-int __init omap2_mux_init(void)
+#define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
+
+#else
+#define omap24xx_pins		NULL
+#define OMAP24XX_PINS_SZ	0
+#endif	/* CONFIG_ARCH_OMAP24XX */
+
+#define OMAP24XX_PULL_ENA	(1 << 3)
+#define OMAP24XX_PULL_UP	(1 << 4)
+
+#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u8 reg)
 {
-	omap_mux_register(omap24xx_pins, ARRAY_SIZE(omap24xx_pins));
+	u16 orig;
+	u8 warn = 0, debug = 0;
+
+	orig = omap_ctrl_readb(cfg->mux_reg);
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+	debug = cfg->debug;
+#endif
+	warn = (orig != reg);
+	if (debug || warn)
+		printk(KERN_WARNING
+			"MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
+			cfg->name, omap_ctrl_base_get() + cfg->mux_reg,
+			orig, reg);
+}
+#else
+#define omap2_cfg_debug(x, y)	do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP24XX
+int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
+{
+	static DEFINE_SPINLOCK(mux_spin_lock);
+	unsigned long flags;
+	u8 reg = 0;
+
+	spin_lock_irqsave(&mux_spin_lock, flags);
+	reg |= cfg->mask & 0x7;
+	if (cfg->pull_val)
+		reg |= OMAP24XX_PULL_ENA;
+	if (cfg->pu_pd_val)
+		reg |= OMAP24XX_PULL_UP;
+	omap2_cfg_debug(cfg, reg);
+	omap_ctrl_writeb(reg, cfg->mux_reg);
+	spin_unlock_irqrestore(&mux_spin_lock, flags);
+
 	return 0;
 }
+#else
+#define omap24xx_cfg_reg	0
+#endif
+
+int __init omap2_mux_init(void)
+{
+	if (cpu_is_omap24xx()) {
+		arch_mux_cfg.pins	= omap24xx_pins;
+		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+	}
+
+	return omap_mux_register(&arch_mux_cfg);
+}
 
 #endif
diff --git a/arch/arm/mach-omap2/pm-domain.c b/arch/arm/mach-omap2/pm-domain.c
deleted file mode 100644
index 2494091a078b..000000000000
--- a/arch/arm/mach-omap2/pm-domain.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/pm-domain.c
- *
- * Power domain functions for OMAP2
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Some code based on earlier OMAP2 sample PM code
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <asm/io.h>
-
-#include "prcm-regs.h"
-
-/* Power domain offsets */
-#define PM_MPU_OFFSET			0x100
-#define PM_CORE_OFFSET			0x200
-#define PM_GFX_OFFSET			0x300
-#define PM_WKUP_OFFSET			0x400		/* Autoidle only */
-#define PM_PLL_OFFSET			0x500		/* Autoidle only */
-#define PM_DSP_OFFSET			0x800
-#define PM_MDM_OFFSET			0xc00
-
-/* Power domain wake-up dependency control register */
-#define PM_WKDEP_OFFSET			0xc8
-#define		EN_MDM			(1 << 5)
-#define		EN_WKUP			(1 << 4)
-#define		EN_GFX			(1 << 3)
-#define		EN_DSP			(1 << 2)
-#define		EN_MPU			(1 << 1)
-#define		EN_CORE			(1 << 0)
-
-/* Core power domain state transition control register */
-#define PM_PWSTCTRL_OFFSET		0xe0
-#define		FORCESTATE		(1 << 18)	/* Only for DSP & GFX */
-#define		MEM4RETSTATE		(1 << 6)
-#define		MEM3RETSTATE		(1 << 5)
-#define		MEM2RETSTATE		(1 << 4)
-#define		MEM1RETSTATE		(1 << 3)
-#define		LOGICRETSTATE		(1 << 2)	/* Logic is retained */
-#define		POWERSTATE_OFF		0x3
-#define		POWERSTATE_RETENTION	0x1
-#define		POWERSTATE_ON		0x0
-
-/* Power domain state register */
-#define PM_PWSTST_OFFSET		0xe4
-
-/* Hardware supervised state transition control register */
-#define CM_CLKSTCTRL_OFFSET		0x48
-#define		AUTOSTAT_MPU		(1 << 0)	/* MPU */
-#define		AUTOSTAT_DSS		(1 << 2)	/* Core */
-#define		AUTOSTAT_L4		(1 << 1)	/* Core */
-#define		AUTOSTAT_L3		(1 << 0)	/* Core */
-#define		AUTOSTAT_GFX		(1 << 0)	/* GFX */
-#define		AUTOSTAT_IVA		(1 << 8)	/* 2420 IVA in DSP domain */
-#define		AUTOSTAT_DSP		(1 << 0)	/* DSP */
-#define		AUTOSTAT_MDM		(1 << 0)	/* MDM */
-
-/* Automatic control of interface clock idling */
-#define CM_AUTOIDLE1_OFFSET		0x30
-#define CM_AUTOIDLE2_OFFSET		0x34		/* Core only */
-#define CM_AUTOIDLE3_OFFSET		0x38		/* Core only */
-#define CM_AUTOIDLE4_OFFSET		0x3c		/* Core only */
-#define		AUTO_54M(x)		(((x) & 0x3) << 6)
-#define		AUTO_96M(x)		(((x) & 0x3) << 2)
-#define		AUTO_DPLL(x)		(((x) & 0x3) << 0)
-#define		AUTO_STOPPED		0x3
-#define		AUTO_BYPASS_FAST	0x2		/* DPLL only */
-#define		AUTO_BYPASS_LOW_POWER	0x1		/* DPLL only */
-#define		AUTO_DISABLED		0x0
-
-/* Voltage control PRCM_VOLTCTRL bits */
-#define		AUTO_EXTVOLT		(1 << 15)
-#define		FORCE_EXTVOLT		(1 << 14)
-#define		SETOFF_LEVEL(x)		(((x) & 0x3) << 12)
-#define		MEMRETCTRL		(1 << 8)
-#define		SETRET_LEVEL(x)		(((x) & 0x3) << 6)
-#define		VOLT_LEVEL(x)		(((x) & 0x3) << 0)
-
-#define OMAP24XX_PRCM_VBASE	IO_ADDRESS(OMAP24XX_PRCM_BASE)
-#define prcm_readl(r)		__raw_readl(OMAP24XX_PRCM_VBASE + (r))
-#define prcm_writel(v, r)	__raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
-
-static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
-{
-	return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
-}
-
-static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
-}
-
-static u32 pmdomain_get_powerstate(int domain_offset)
-{
-	return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_powerstate(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autocontrol(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
-{
-	prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
-}
-
-static u32 pmdomain_get_clock_autoidle1(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle2(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle3(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
-}
-
-/* Core domain only */
-static u32 pmdomain_get_clock_autoidle4(int domain_offset)
-{
-	return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
-}
-
-static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
-}
-
-/* Core domain only */
-static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
-{
-	prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
-}
-
-/*
- * Configures power management domains to idle clocks automatically.
- */
-void pmdomain_set_autoidle(void)
-{
-	u32 val;
-
-	/* Set PLL auto stop for 54M, 96M & DPLL */
-	pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
-				     AUTO_96M(AUTO_STOPPED) |
-				     AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
-
-	/* External clock input control
-	 * REVISIT: Should this be in clock framework?
-	 */
-	PRCM_CLKSRC_CTRL |= (0x3 << 3);
-
-	/* Configure number of 32KHz clock cycles for sys_clk */
-	PRCM_CLKSSETUP = 0x00ff;
-
-	/* Configure automatic voltage transition */
-	PRCM_VOLTSETUP = 0;
-	val = PRCM_VOLTCTRL;
-	val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
-	val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
-	PRCM_VOLTCTRL = val;
-
-	/* Disable emulation tools functional clock */
-	PRCM_CLKEMUL_CTRL = 0x0;
-
-	/* Set core memory retention state */
-	val = pmdomain_get_powerstate(PM_CORE_OFFSET);
-	if (cpu_is_omap2420()) {
-		val &= ~(0x7 << 3);
-		val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
-	} else {
-		val &= ~(0xf << 3);
-		val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
-			MEM1RETSTATE);
-	}
-	pmdomain_set_powerstate(val, PM_CORE_OFFSET);
-
-	/* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
-	val = SMS_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3) | (1 << 0);
-	SMS_SYSCONFIG |= val;
-
-	val = SDRC_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3);
-	SDRC_SYSCONFIG = val;
-
-	/* Configure L3 interface for smart idle.
-	 * REVISIT: Enable autoidle bit0 ?
-	 */
-	val = GPMC_SYSCONFIG;
-	val &= ~(0x3 << 3);
-	val |= (0x2 << 3) | (1 << 0);
-	GPMC_SYSCONFIG = val;
-
-	pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
-				PM_MPU_OFFSET);
-	pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
-	if (!cpu_is_omap2420())
-		pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
-
-	/* Assume suspend function has saved the state for DSP and GFX */
-	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
-	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
-
-#if 0
-	/* REVISIT: Internal USB needs special handling */
-	force_standby_usb();
-	if (cpu_is_omap2430())
-		force_hsmmc();
-	sdram_self_refresh_on_idle_req(1);
-#endif
-
-	/* Enable clock auto control for all domains.
-	 * Note that CORE domain includes also DSS, L4 & L3.
-	 */
-	pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
-	pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
-	pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
-				       PM_CORE_OFFSET);
-	if (cpu_is_omap2420())
-		pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
-					       PM_DSP_OFFSET);
-	else {
-		pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
-		pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
-	}
-
-	/* Enable clock autoidle for all domains */
-	pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
-	if (cpu_is_omap2420()) {
-		pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
-	} else {
-		pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
-		pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
-		pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
-	}
-	pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
-	pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
-}
-
-/*
- * Initializes power domains by removing wake-up dependencies and powering
- * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
- * must re-enable DSP and GFX when used.
- */
-void __init pmdomain_init(void)
-{
-	/* Remove all domain wakeup dependencies */
-	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
-	pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
-	pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
-	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
-	if (cpu_is_omap2430())
-		pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
-
-	/* Power down DSP and GFX */
-	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
-	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
-}
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index baf7d82b458b..aad781dcf1b1 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -23,6 +23,7 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -36,8 +37,6 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/pm.h>
 
-#include "prcm-regs.h"
-
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
@@ -78,251 +77,8 @@ static int omap2_pm_prepare(void)
 	return 0;
 }
 
-#define INT0_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) |	\
-			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) |	\
-			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
-
-#define INT1_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
-
-#define INT2_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) |	\
-			OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) |	\
-			OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
-
-#define preg(reg)	printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
-
-static void omap2_pm_debug(char * desc)
-{
-	printk("%s:\n", desc);
-
-	preg(CM_CLKSTCTRL_MPU);
-	preg(CM_CLKSTCTRL_CORE);
-	preg(CM_CLKSTCTRL_GFX);
-	preg(CM_CLKSTCTRL_DSP);
-	preg(CM_CLKSTCTRL_MDM);
-
-	preg(PM_PWSTCTRL_MPU);
-	preg(PM_PWSTCTRL_CORE);
-	preg(PM_PWSTCTRL_GFX);
-	preg(PM_PWSTCTRL_DSP);
-	preg(PM_PWSTCTRL_MDM);
-
-	preg(PM_PWSTST_MPU);
-	preg(PM_PWSTST_CORE);
-	preg(PM_PWSTST_GFX);
-	preg(PM_PWSTST_DSP);
-	preg(PM_PWSTST_MDM);
-
-	preg(CM_AUTOIDLE1_CORE);
-	preg(CM_AUTOIDLE2_CORE);
-	preg(CM_AUTOIDLE3_CORE);
-	preg(CM_AUTOIDLE4_CORE);
-	preg(CM_AUTOIDLE_WKUP);
-	preg(CM_AUTOIDLE_PLL);
-	preg(CM_AUTOIDLE_DSP);
-	preg(CM_AUTOIDLE_MDM);
-
-	preg(CM_ICLKEN1_CORE);
-	preg(CM_ICLKEN2_CORE);
-	preg(CM_ICLKEN3_CORE);
-	preg(CM_ICLKEN4_CORE);
-	preg(CM_ICLKEN_GFX);
-	preg(CM_ICLKEN_WKUP);
-	preg(CM_ICLKEN_DSP);
-	preg(CM_ICLKEN_MDM);
-
-	preg(CM_IDLEST1_CORE);
-	preg(CM_IDLEST2_CORE);
-	preg(CM_IDLEST3_CORE);
-	preg(CM_IDLEST4_CORE);
-	preg(CM_IDLEST_GFX);
-	preg(CM_IDLEST_WKUP);
-	preg(CM_IDLEST_CKGEN);
-	preg(CM_IDLEST_DSP);
-	preg(CM_IDLEST_MDM);
-
-	preg(RM_RSTST_MPU);
-	preg(RM_RSTST_GFX);
-	preg(RM_RSTST_WKUP);
-	preg(RM_RSTST_DSP);
-	preg(RM_RSTST_MDM);
-
-	preg(PM_WKDEP_MPU);
-	preg(PM_WKDEP_CORE);
-	preg(PM_WKDEP_GFX);
-	preg(PM_WKDEP_DSP);
-	preg(PM_WKDEP_MDM);
-
-	preg(CM_FCLKEN_WKUP);
-	preg(CM_ICLKEN_WKUP);
-	preg(CM_IDLEST_WKUP);
-	preg(CM_AUTOIDLE_WKUP);
-	preg(CM_CLKSEL_WKUP);
-
-	preg(PM_WKEN_WKUP);
-	preg(PM_WKST_WKUP);
-}
-
-static inline void omap2_pm_save_registers(void)
-{
-	/* Save interrupt registers */
-	OMAP24XX_SAVE(INTC_MIR0);
-	OMAP24XX_SAVE(INTC_MIR1);
-	OMAP24XX_SAVE(INTC_MIR2);
-
-	/* Save power control registers */
-	OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
-	OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
-
-	/* Save power state registers */
-	OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
-	OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
-	OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
-	OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
-	OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
-
-	/* Save autoidle registers */
-	OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
-	OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
-	OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
-	OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
-	OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
-
-	/* Save idle state registers */
-	OMAP24XX_SAVE(CM_IDLEST1_CORE);
-	OMAP24XX_SAVE(CM_IDLEST2_CORE);
-	OMAP24XX_SAVE(CM_IDLEST3_CORE);
-	OMAP24XX_SAVE(CM_IDLEST4_CORE);
-	OMAP24XX_SAVE(CM_IDLEST_GFX);
-	OMAP24XX_SAVE(CM_IDLEST_WKUP);
-	OMAP24XX_SAVE(CM_IDLEST_CKGEN);
-	OMAP24XX_SAVE(CM_IDLEST_DSP);
-	OMAP24XX_SAVE(CM_IDLEST_MDM);
-
-	/* Save clock registers */
-	OMAP24XX_SAVE(CM_FCLKEN1_CORE);
-	OMAP24XX_SAVE(CM_FCLKEN2_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN1_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN2_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN3_CORE);
-	OMAP24XX_SAVE(CM_ICLKEN4_CORE);
-}
-
-static inline void omap2_pm_restore_registers(void)
-{
-	/* Restore clock state registers */
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
-	OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
-
-	/* Restore power state registers */
-	OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
-	OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
-
-	/* Restore idle state registers */
-	OMAP24XX_RESTORE(CM_IDLEST1_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST2_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST3_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST4_CORE);
-	OMAP24XX_RESTORE(CM_IDLEST_GFX);
-	OMAP24XX_RESTORE(CM_IDLEST_WKUP);
-	OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
-	OMAP24XX_RESTORE(CM_IDLEST_DSP);
-	OMAP24XX_RESTORE(CM_IDLEST_MDM);
-
-	/* Restore autoidle registers */
-	OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
-	OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
-
-	/* Restore clock registers */
-	OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
-	OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
-	OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
-
-	/* REVISIT: Clear interrupts here */
-
-	/* Restore interrupt registers */
-	OMAP24XX_RESTORE(INTC_MIR0);
-	OMAP24XX_RESTORE(INTC_MIR1);
-	OMAP24XX_RESTORE(INTC_MIR2);
-}
-
 static int omap2_pm_suspend(void)
 {
-	int processor_type = 0;
-
-	/* REVISIT: 0x21 or 0x26? */
-	if (cpu_is_omap2420())
-		processor_type = 0x21;
-
-	if (!processor_type)
-		return -ENOTSUPP;
-
-	local_irq_disable();
-	local_fiq_disable();
-
-	omap2_pm_save_registers();
-
-	/* Disable interrupts except for the wake events */
-	INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
-	INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
-	INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
-
-	pmdomain_set_autoidle();
-
-	/* Clear old wake-up events */
-	PM_WKST1_CORE = 0;
-	PM_WKST2_CORE = 0;
-	PM_WKST_WKUP = 0;
-
-	/* Enable wake-up events */
-	PM_WKEN1_CORE = (1 << 22) | (1 << 21);	/* UART1 & 2 */
-	PM_WKEN2_CORE = (1 << 2);		/* UART3 */
-	PM_WKEN_WKUP = (1 << 2) | (1 << 0);	/* GPIO & GPT1 */
-
-	/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
-	 * in the SRAM suspend code */
-	CM_FCLKEN1_CORE = 0;
-	CM_FCLKEN2_CORE = 0;
-	CM_ICLKEN1_CORE = 0;
-	CM_ICLKEN3_CORE = 0;
-	CM_ICLKEN4_CORE = 0;
-
-	omap2_pm_debug("Status before suspend");
-
-	/* Must wait for serial buffers to clear */
-	mdelay(200);
-
-	/* Jump to SRAM suspend code
-	 * REVISIT: When is this SDRC_DLLB_CTRL?
-	 */
-	omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
-
-	/* Back from sleep */
-	omap2_pm_restore_registers();
-
-	local_fiq_enable();
-	local_irq_enable();
-
 	return 0;
 }
 
@@ -357,30 +113,6 @@ static struct platform_suspend_ops omap_pm_ops = {
 
 int __init omap2_pm_init(void)
 {
-	printk("Power Management for TI OMAP.\n");
-
-	vclk = clk_get(NULL, "virt_prcm_set");
-	if (IS_ERR(vclk)) {
-		printk(KERN_ERR "Could not get PM vclk\n");
-		return -ENODEV;
-	}
-
-	/*
-	 * We copy the assembler sleep/wakeup routines to SRAM.
-	 * These routines need to be in SRAM as that's the only
-	 * memory the MPU can see when it wakes up.
-	 */
-	omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
-					 omap24xx_idle_loop_suspend_sz);
-
-	omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
-					    omap24xx_cpu_suspend_sz);
-
-	suspend_set_ops(&omap_pm_ops);
-	pm_idle = omap2_pm_idle;
-
-	pmdomain_init();
-
 	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
new file mode 100644
index 000000000000..cacb34086e35
--- /dev/null
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -0,0 +1,317 @@
+#ifndef __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+#define __ARCH_ASM_MACH_OMAP2_PRCM_COMMON_H
+
+/*
+ * OMAP2/3 PRCM base and module definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* Module offsets from both CM_BASE & PRM_BASE */
+
+/*
+ * Offsets that are the same on 24xx and 34xx
+ *
+ * Technically, in terms of the TRM, OCP_MOD is 34xx only; PLL_MOD is
+ * CCR_MOD on 3430; and GFX_MOD only exists < 3430ES2.
+ */
+#define OCP_MOD						0x000
+#define MPU_MOD						0x100
+#define CORE_MOD					0x200
+#define GFX_MOD						0x300
+#define WKUP_MOD					0x400
+#define PLL_MOD						0x500
+
+
+/* Chip-specific module offsets */
+#define OMAP24XX_DSP_MOD				0x800
+
+#define OMAP2430_MDM_MOD				0xc00
+
+/* IVA2 module is < base on 3430 */
+#define OMAP3430_IVA2_MOD				-0x800
+#define OMAP3430ES2_SGX_MOD				GFX_MOD
+#define OMAP3430_CCR_MOD				PLL_MOD
+#define OMAP3430_DSS_MOD				0x600
+#define OMAP3430_CAM_MOD				0x700
+#define OMAP3430_PER_MOD				0x800
+#define OMAP3430_EMU_MOD				0x900
+#define OMAP3430_GR_MOD					0xa00
+#define OMAP3430_NEON_MOD				0xb00
+#define OMAP3430ES2_USBHOST_MOD				0xc00
+
+
+/* 24XX register bits shared between CM & PRM registers */
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP2420_EN_MMC_SHIFT				26
+#define OMAP2420_EN_MMC					(1 << 26)
+#define OMAP24XX_EN_UART2_SHIFT				22
+#define OMAP24XX_EN_UART2				(1 << 22)
+#define OMAP24XX_EN_UART1_SHIFT				21
+#define OMAP24XX_EN_UART1				(1 << 21)
+#define OMAP24XX_EN_MCSPI2_SHIFT			18
+#define OMAP24XX_EN_MCSPI2				(1 << 18)
+#define OMAP24XX_EN_MCSPI1_SHIFT			17
+#define OMAP24XX_EN_MCSPI1				(1 << 17)
+#define OMAP24XX_EN_MCBSP2_SHIFT			16
+#define OMAP24XX_EN_MCBSP2				(1 << 16)
+#define OMAP24XX_EN_MCBSP1_SHIFT			15
+#define OMAP24XX_EN_MCBSP1				(1 << 15)
+#define OMAP24XX_EN_GPT12_SHIFT				14
+#define OMAP24XX_EN_GPT12				(1 << 14)
+#define OMAP24XX_EN_GPT11_SHIFT				13
+#define OMAP24XX_EN_GPT11				(1 << 13)
+#define OMAP24XX_EN_GPT10_SHIFT				12
+#define OMAP24XX_EN_GPT10				(1 << 12)
+#define OMAP24XX_EN_GPT9_SHIFT				11
+#define OMAP24XX_EN_GPT9				(1 << 11)
+#define OMAP24XX_EN_GPT8_SHIFT				10
+#define OMAP24XX_EN_GPT8				(1 << 10)
+#define OMAP24XX_EN_GPT7_SHIFT				9
+#define OMAP24XX_EN_GPT7				(1 << 9)
+#define OMAP24XX_EN_GPT6_SHIFT				8
+#define OMAP24XX_EN_GPT6				(1 << 8)
+#define OMAP24XX_EN_GPT5_SHIFT				7
+#define OMAP24XX_EN_GPT5				(1 << 7)
+#define OMAP24XX_EN_GPT4_SHIFT				6
+#define OMAP24XX_EN_GPT4				(1 << 6)
+#define OMAP24XX_EN_GPT3_SHIFT				5
+#define OMAP24XX_EN_GPT3				(1 << 5)
+#define OMAP24XX_EN_GPT2_SHIFT				4
+#define OMAP24XX_EN_GPT2				(1 << 4)
+#define OMAP2420_EN_VLYNQ_SHIFT				3
+#define OMAP2420_EN_VLYNQ				(1 << 3)
+
+/* CM_FCLKEN2_CORE, CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_GPIO5_SHIFT				10
+#define OMAP2430_EN_GPIO5				(1 << 10)
+#define OMAP2430_EN_MCSPI3_SHIFT			9
+#define OMAP2430_EN_MCSPI3				(1 << 9)
+#define OMAP2430_EN_MMCHS2_SHIFT			8
+#define OMAP2430_EN_MMCHS2				(1 << 8)
+#define OMAP2430_EN_MMCHS1_SHIFT			7
+#define OMAP2430_EN_MMCHS1				(1 << 7)
+#define OMAP24XX_EN_UART3_SHIFT				2
+#define OMAP24XX_EN_UART3				(1 << 2)
+#define OMAP24XX_EN_USB_SHIFT				0
+#define OMAP24XX_EN_USB					(1 << 0)
+
+/* CM_ICLKEN2_CORE, PM_WKEN2_CORE shared bits */
+#define OMAP2430_EN_MDM_INTC_SHIFT			11
+#define OMAP2430_EN_MDM_INTC				(1 << 11)
+#define OMAP2430_EN_USBHS_SHIFT				6
+#define OMAP2430_EN_USBHS				(1 << 6)
+
+/* CM_IDLEST1_CORE, PM_WKST1_CORE shared bits */
+#define OMAP2420_ST_MMC					(1 << 26)
+#define OMAP24XX_ST_UART2				(1 << 22)
+#define OMAP24XX_ST_UART1				(1 << 21)
+#define OMAP24XX_ST_MCSPI2				(1 << 18)
+#define OMAP24XX_ST_MCSPI1				(1 << 17)
+#define OMAP24XX_ST_GPT12				(1 << 14)
+#define OMAP24XX_ST_GPT11				(1 << 13)
+#define OMAP24XX_ST_GPT10				(1 << 12)
+#define OMAP24XX_ST_GPT9				(1 << 11)
+#define OMAP24XX_ST_GPT8				(1 << 10)
+#define OMAP24XX_ST_GPT7				(1 << 9)
+#define OMAP24XX_ST_GPT6				(1 << 8)
+#define OMAP24XX_ST_GPT5				(1 << 7)
+#define OMAP24XX_ST_GPT4				(1 << 6)
+#define OMAP24XX_ST_GPT3				(1 << 5)
+#define OMAP24XX_ST_GPT2				(1 << 4)
+#define OMAP2420_ST_VLYNQ				(1 << 3)
+
+/* CM_IDLEST2_CORE, PM_WKST2_CORE shared bits */
+#define OMAP2430_ST_MDM_INTC				(1 << 11)
+#define OMAP2430_ST_GPIO5				(1 << 10)
+#define OMAP2430_ST_MCSPI3				(1 << 9)
+#define OMAP2430_ST_MMCHS2				(1 << 8)
+#define OMAP2430_ST_MMCHS1				(1 << 7)
+#define OMAP2430_ST_USBHS				(1 << 6)
+#define OMAP24XX_ST_UART3				(1 << 2)
+#define OMAP24XX_ST_USB					(1 << 0)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP24XX_EN_GPIOS_SHIFT				2
+#define OMAP24XX_EN_GPIOS				(1 << 2)
+#define OMAP24XX_EN_GPT1_SHIFT				0
+#define OMAP24XX_EN_GPT1				(1 << 0)
+
+/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
+#define OMAP24XX_ST_GPIOS				(1 << 2)
+#define OMAP24XX_ST_GPT1				(1 << 0)
+
+/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
+#define OMAP2430_ST_MDM					(1 << 0)
+
+
+/* 3430 register bits shared between CM & PRM registers */
+
+/* CM_REVISION, PRM_REVISION shared bits */
+#define OMAP3430_REV_SHIFT				0
+#define OMAP3430_REV_MASK				(0xff << 0)
+
+/* CM_SYSCONFIG, PRM_SYSCONFIG shared bits */
+#define OMAP3430_AUTOIDLE				(1 << 0)
+
+/* CM_FCLKEN1_CORE, CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_MMC2				(1 << 25)
+#define OMAP3430_EN_MMC2_SHIFT				25
+#define OMAP3430_EN_MMC1				(1 << 24)
+#define OMAP3430_EN_MMC1_SHIFT				24
+#define OMAP3430_EN_MCSPI4				(1 << 21)
+#define OMAP3430_EN_MCSPI4_SHIFT			21
+#define OMAP3430_EN_MCSPI3				(1 << 20)
+#define OMAP3430_EN_MCSPI3_SHIFT			20
+#define OMAP3430_EN_MCSPI2				(1 << 19)
+#define OMAP3430_EN_MCSPI2_SHIFT			19
+#define OMAP3430_EN_MCSPI1				(1 << 18)
+#define OMAP3430_EN_MCSPI1_SHIFT			18
+#define OMAP3430_EN_I2C3				(1 << 17)
+#define OMAP3430_EN_I2C3_SHIFT				17
+#define OMAP3430_EN_I2C2				(1 << 16)
+#define OMAP3430_EN_I2C2_SHIFT				16
+#define OMAP3430_EN_I2C1				(1 << 15)
+#define OMAP3430_EN_I2C1_SHIFT				15
+#define OMAP3430_EN_UART2				(1 << 14)
+#define OMAP3430_EN_UART2_SHIFT				14
+#define OMAP3430_EN_UART1				(1 << 13)
+#define OMAP3430_EN_UART1_SHIFT				13
+#define OMAP3430_EN_GPT11				(1 << 12)
+#define OMAP3430_EN_GPT11_SHIFT				12
+#define OMAP3430_EN_GPT10				(1 << 11)
+#define OMAP3430_EN_GPT10_SHIFT				11
+#define OMAP3430_EN_MCBSP5				(1 << 10)
+#define OMAP3430_EN_MCBSP5_SHIFT			10
+#define OMAP3430_EN_MCBSP1				(1 << 9)
+#define OMAP3430_EN_MCBSP1_SHIFT			9
+#define OMAP3430_EN_FSHOSTUSB				(1 << 5)
+#define OMAP3430_EN_FSHOSTUSB_SHIFT			5
+#define OMAP3430_EN_D2D					(1 << 3)
+#define OMAP3430_EN_D2D_SHIFT				3
+
+/* CM_ICLKEN1_CORE, PM_WKEN1_CORE shared bits */
+#define OMAP3430_EN_HSOTGUSB				(1 << 4)
+#define OMAP3430_EN_HSOTGUSB_SHIFT				4
+
+/* PM_WKST1_CORE, CM_IDLEST1_CORE shared bits */
+#define OMAP3430_ST_MMC2				(1 << 25)
+#define OMAP3430_ST_MMC1				(1 << 24)
+#define OMAP3430_ST_MCSPI4				(1 << 21)
+#define OMAP3430_ST_MCSPI3				(1 << 20)
+#define OMAP3430_ST_MCSPI2				(1 << 19)
+#define OMAP3430_ST_MCSPI1				(1 << 18)
+#define OMAP3430_ST_I2C3				(1 << 17)
+#define OMAP3430_ST_I2C2				(1 << 16)
+#define OMAP3430_ST_I2C1				(1 << 15)
+#define OMAP3430_ST_UART2				(1 << 14)
+#define OMAP3430_ST_UART1				(1 << 13)
+#define OMAP3430_ST_GPT11				(1 << 12)
+#define OMAP3430_ST_GPT10				(1 << 11)
+#define OMAP3430_ST_MCBSP5				(1 << 10)
+#define OMAP3430_ST_MCBSP1				(1 << 9)
+#define OMAP3430_ST_FSHOSTUSB				(1 << 5)
+#define OMAP3430_ST_HSOTGUSB				(1 << 4)
+#define OMAP3430_ST_D2D					(1 << 3)
+
+/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPIO1				(1 << 3)
+#define OMAP3430_EN_GPIO1_SHIFT				3
+#define OMAP3430_EN_GPT1				(1 << 0)
+#define OMAP3430_EN_GPT1_SHIFT				0
+
+/* CM_FCLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_SR2					(1 << 7)
+#define OMAP3430_EN_SR2_SHIFT				7
+#define OMAP3430_EN_SR1					(1 << 6)
+#define OMAP3430_EN_SR1_SHIFT				6
+
+/* CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
+#define OMAP3430_EN_GPT12				(1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT				1
+
+/* CM_IDLEST_WKUP, PM_WKST_WKUP shared bits */
+#define OMAP3430_ST_SR2					(1 << 7)
+#define OMAP3430_ST_SR1					(1 << 6)
+#define OMAP3430_ST_GPIO1				(1 << 3)
+#define OMAP3430_ST_GPT12				(1 << 1)
+#define OMAP3430_ST_GPT1				(1 << 0)
+
+/*
+ * CM_SLEEPDEP_GFX, CM_SLEEPDEP_DSS, CM_SLEEPDEP_CAM,
+ * CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_GFX,
+ * PM_WKDEP_DSS, PM_WKDEP_CAM, PM_WKDEP_PER, PM_WKDEP_NEON shared bits
+ */
+#define OMAP3430_EN_MPU					(1 << 1)
+#define OMAP3430_EN_MPU_SHIFT				1
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER shared bits */
+#define OMAP3430_EN_GPIO6				(1 << 17)
+#define OMAP3430_EN_GPIO6_SHIFT				17
+#define OMAP3430_EN_GPIO5				(1 << 16)
+#define OMAP3430_EN_GPIO5_SHIFT				16
+#define OMAP3430_EN_GPIO4				(1 << 15)
+#define OMAP3430_EN_GPIO4_SHIFT				15
+#define OMAP3430_EN_GPIO3				(1 << 14)
+#define OMAP3430_EN_GPIO3_SHIFT				14
+#define OMAP3430_EN_GPIO2				(1 << 13)
+#define OMAP3430_EN_GPIO2_SHIFT				13
+#define OMAP3430_EN_UART3				(1 << 11)
+#define OMAP3430_EN_UART3_SHIFT				11
+#define OMAP3430_EN_GPT9				(1 << 10)
+#define OMAP3430_EN_GPT9_SHIFT				10
+#define OMAP3430_EN_GPT8				(1 << 9)
+#define OMAP3430_EN_GPT8_SHIFT				9
+#define OMAP3430_EN_GPT7				(1 << 8)
+#define OMAP3430_EN_GPT7_SHIFT				8
+#define OMAP3430_EN_GPT6				(1 << 7)
+#define OMAP3430_EN_GPT6_SHIFT				7
+#define OMAP3430_EN_GPT5				(1 << 6)
+#define OMAP3430_EN_GPT5_SHIFT				6
+#define OMAP3430_EN_GPT4				(1 << 5)
+#define OMAP3430_EN_GPT4_SHIFT				5
+#define OMAP3430_EN_GPT3				(1 << 4)
+#define OMAP3430_EN_GPT3_SHIFT				4
+#define OMAP3430_EN_GPT2				(1 << 3)
+#define OMAP3430_EN_GPT2_SHIFT				3
+
+/* CM_FCLKEN_PER, CM_ICLKEN_PER, PM_WKEN_PER, PM_WKST_PER shared bits */
+/* XXX Possible TI documentation bug: should the PM_WKST_PER EN_* bits
+ * be ST_* bits instead? */
+#define OMAP3430_EN_MCBSP4				(1 << 2)
+#define OMAP3430_EN_MCBSP4_SHIFT			2
+#define OMAP3430_EN_MCBSP3				(1 << 1)
+#define OMAP3430_EN_MCBSP3_SHIFT			1
+#define OMAP3430_EN_MCBSP2				(1 << 0)
+#define OMAP3430_EN_MCBSP2_SHIFT			0
+
+/* CM_IDLEST_PER, PM_WKST_PER shared bits */
+#define OMAP3430_ST_GPIO6				(1 << 17)
+#define OMAP3430_ST_GPIO5				(1 << 16)
+#define OMAP3430_ST_GPIO4				(1 << 15)
+#define OMAP3430_ST_GPIO3				(1 << 14)
+#define OMAP3430_ST_GPIO2				(1 << 13)
+#define OMAP3430_ST_UART3				(1 << 11)
+#define OMAP3430_ST_GPT9				(1 << 10)
+#define OMAP3430_ST_GPT8				(1 << 9)
+#define OMAP3430_ST_GPT7				(1 << 8)
+#define OMAP3430_ST_GPT6				(1 << 7)
+#define OMAP3430_ST_GPT5				(1 << 6)
+#define OMAP3430_ST_GPT4				(1 << 5)
+#define OMAP3430_ST_GPT3				(1 << 4)
+#define OMAP3430_ST_GPT2				(1 << 3)
+
+/* CM_SLEEPDEP_PER, PM_WKDEP_IVA2, PM_WKDEP_MPU, PM_WKDEP_PER shared bits */
+#define OMAP3430_EN_CORE				(1 << 0)
+
+#endif
+
diff --git a/arch/arm/mach-omap2/prcm-regs.h b/arch/arm/mach-omap2/prcm-regs.h
deleted file mode 100644
index 5e1c4b53ee9d..000000000000
--- a/arch/arm/mach-omap2/prcm-regs.h
+++ /dev/null
@@ -1,483 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/prcm-regs.h
- *
- * OMAP24XX Power Reset and Clock Management (PRCM) registers
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
-#define __ARCH_ARM_MACH_OMAP2_PRCM_H
-
-/* SET_PERFORMANCE_LEVEL PARAMETERS */
-#define PRCM_HALF_SPEED 1
-#define PRCM_FULL_SPEED 2
-
-#ifndef __ASSEMBLER__
-
-#define PRCM_REG32(offset)	__REG32(OMAP24XX_PRCM_BASE + (offset))
-
-#define PRCM_REVISION		PRCM_REG32(0x000)
-#define PRCM_SYSCONFIG		PRCM_REG32(0x010)
-#define PRCM_IRQSTATUS_MPU	PRCM_REG32(0x018)
-#define PRCM_IRQENABLE_MPU	PRCM_REG32(0x01C)
-#define PRCM_VOLTCTRL		PRCM_REG32(0x050)
-#define PRCM_VOLTST		PRCM_REG32(0x054)
-#define PRCM_CLKSRC_CTRL	PRCM_REG32(0x060)
-#define PRCM_CLKOUT_CTRL	PRCM_REG32(0x070)
-#define PRCM_CLKEMUL_CTRL	PRCM_REG32(0x078)
-#define PRCM_CLKCFG_CTRL	PRCM_REG32(0x080)
-#define PRCM_CLKCFG_STATUS	PRCM_REG32(0x084)
-#define PRCM_VOLTSETUP		PRCM_REG32(0x090)
-#define PRCM_CLKSSETUP		PRCM_REG32(0x094)
-#define PRCM_POLCTRL		PRCM_REG32(0x098)
-
-/* GENERAL PURPOSE */
-#define GENERAL_PURPOSE1	PRCM_REG32(0x0B0)
-#define GENERAL_PURPOSE2	PRCM_REG32(0x0B4)
-#define GENERAL_PURPOSE3	PRCM_REG32(0x0B8)
-#define GENERAL_PURPOSE4	PRCM_REG32(0x0BC)
-#define GENERAL_PURPOSE5	PRCM_REG32(0x0C0)
-#define GENERAL_PURPOSE6	PRCM_REG32(0x0C4)
-#define GENERAL_PURPOSE7	PRCM_REG32(0x0C8)
-#define GENERAL_PURPOSE8	PRCM_REG32(0x0CC)
-#define GENERAL_PURPOSE9	PRCM_REG32(0x0D0)
-#define GENERAL_PURPOSE10	PRCM_REG32(0x0D4)
-#define GENERAL_PURPOSE11	PRCM_REG32(0x0D8)
-#define GENERAL_PURPOSE12	PRCM_REG32(0x0DC)
-#define GENERAL_PURPOSE13	PRCM_REG32(0x0E0)
-#define GENERAL_PURPOSE14	PRCM_REG32(0x0E4)
-#define GENERAL_PURPOSE15	PRCM_REG32(0x0E8)
-#define GENERAL_PURPOSE16	PRCM_REG32(0x0EC)
-#define GENERAL_PURPOSE17	PRCM_REG32(0x0F0)
-#define GENERAL_PURPOSE18	PRCM_REG32(0x0F4)
-#define GENERAL_PURPOSE19	PRCM_REG32(0x0F8)
-#define GENERAL_PURPOSE20	PRCM_REG32(0x0FC)
-
-/* MPU */
-#define CM_CLKSEL_MPU		PRCM_REG32(0x140)
-#define CM_CLKSTCTRL_MPU	PRCM_REG32(0x148)
-#define RM_RSTST_MPU		PRCM_REG32(0x158)
-#define PM_WKDEP_MPU		PRCM_REG32(0x1C8)
-#define PM_EVGENCTRL_MPU	PRCM_REG32(0x1D4)
-#define PM_EVEGENONTIM_MPU	PRCM_REG32(0x1D8)
-#define PM_EVEGENOFFTIM_MPU	PRCM_REG32(0x1DC)
-#define PM_PWSTCTRL_MPU		PRCM_REG32(0x1E0)
-#define PM_PWSTST_MPU		PRCM_REG32(0x1E4)
-
-/* CORE */
-#define CM_FCLKEN1_CORE		PRCM_REG32(0x200)
-#define CM_FCLKEN2_CORE		PRCM_REG32(0x204)
-#define CM_FCLKEN3_CORE		PRCM_REG32(0x208)
-#define CM_ICLKEN1_CORE		PRCM_REG32(0x210)
-#define CM_ICLKEN2_CORE		PRCM_REG32(0x214)
-#define CM_ICLKEN3_CORE		PRCM_REG32(0x218)
-#define CM_ICLKEN4_CORE		PRCM_REG32(0x21C)
-#define CM_IDLEST1_CORE		PRCM_REG32(0x220)
-#define CM_IDLEST2_CORE		PRCM_REG32(0x224)
-#define CM_IDLEST3_CORE		PRCM_REG32(0x228)
-#define CM_IDLEST4_CORE		PRCM_REG32(0x22C)
-#define CM_AUTOIDLE1_CORE	PRCM_REG32(0x230)
-#define CM_AUTOIDLE2_CORE	PRCM_REG32(0x234)
-#define CM_AUTOIDLE3_CORE	PRCM_REG32(0x238)
-#define CM_AUTOIDLE4_CORE	PRCM_REG32(0x23C)
-#define CM_CLKSEL1_CORE		PRCM_REG32(0x240)
-#define CM_CLKSEL2_CORE		PRCM_REG32(0x244)
-#define CM_CLKSTCTRL_CORE	PRCM_REG32(0x248)
-#define PM_WKEN1_CORE		PRCM_REG32(0x2A0)
-#define PM_WKEN2_CORE		PRCM_REG32(0x2A4)
-#define PM_WKST1_CORE		PRCM_REG32(0x2B0)
-#define PM_WKST2_CORE		PRCM_REG32(0x2B4)
-#define PM_WKDEP_CORE		PRCM_REG32(0x2C8)
-#define PM_PWSTCTRL_CORE	PRCM_REG32(0x2E0)
-#define PM_PWSTST_CORE		PRCM_REG32(0x2E4)
-
-/* GFX */
-#define CM_FCLKEN_GFX		PRCM_REG32(0x300)
-#define CM_ICLKEN_GFX		PRCM_REG32(0x310)
-#define CM_IDLEST_GFX		PRCM_REG32(0x320)
-#define CM_CLKSEL_GFX		PRCM_REG32(0x340)
-#define CM_CLKSTCTRL_GFX	PRCM_REG32(0x348)
-#define RM_RSTCTRL_GFX		PRCM_REG32(0x350)
-#define RM_RSTST_GFX		PRCM_REG32(0x358)
-#define PM_WKDEP_GFX		PRCM_REG32(0x3C8)
-#define PM_PWSTCTRL_GFX		PRCM_REG32(0x3E0)
-#define PM_PWSTST_GFX		PRCM_REG32(0x3E4)
-
-/* WAKE-UP */
-#define CM_FCLKEN_WKUP		PRCM_REG32(0x400)
-#define CM_ICLKEN_WKUP		PRCM_REG32(0x410)
-#define CM_IDLEST_WKUP		PRCM_REG32(0x420)
-#define CM_AUTOIDLE_WKUP	PRCM_REG32(0x430)
-#define CM_CLKSEL_WKUP		PRCM_REG32(0x440)
-#define RM_RSTCTRL_WKUP		PRCM_REG32(0x450)
-#define RM_RSTTIME_WKUP		PRCM_REG32(0x454)
-#define RM_RSTST_WKUP		PRCM_REG32(0x458)
-#define PM_WKEN_WKUP		PRCM_REG32(0x4A0)
-#define PM_WKST_WKUP		PRCM_REG32(0x4B0)
-
-/* CLOCKS */
-#define CM_CLKEN_PLL		PRCM_REG32(0x500)
-#define CM_IDLEST_CKGEN		PRCM_REG32(0x520)
-#define CM_AUTOIDLE_PLL		PRCM_REG32(0x530)
-#define CM_CLKSEL1_PLL		PRCM_REG32(0x540)
-#define CM_CLKSEL2_PLL		PRCM_REG32(0x544)
-
-/* DSP */
-#define CM_FCLKEN_DSP		PRCM_REG32(0x800)
-#define CM_ICLKEN_DSP		PRCM_REG32(0x810)
-#define CM_IDLEST_DSP		PRCM_REG32(0x820)
-#define CM_AUTOIDLE_DSP		PRCM_REG32(0x830)
-#define CM_CLKSEL_DSP		PRCM_REG32(0x840)
-#define CM_CLKSTCTRL_DSP	PRCM_REG32(0x848)
-#define RM_RSTCTRL_DSP		PRCM_REG32(0x850)
-#define RM_RSTST_DSP		PRCM_REG32(0x858)
-#define PM_WKEN_DSP		PRCM_REG32(0x8A0)
-#define PM_WKDEP_DSP		PRCM_REG32(0x8C8)
-#define PM_PWSTCTRL_DSP		PRCM_REG32(0x8E0)
-#define PM_PWSTST_DSP		PRCM_REG32(0x8E4)
-#define PRCM_IRQSTATUS_DSP	PRCM_REG32(0x8F0)
-#define PRCM_IRQENABLE_DSP	PRCM_REG32(0x8F4)
-
-/* IVA */
-#define PRCM_IRQSTATUS_IVA	PRCM_REG32(0x8F8)
-#define PRCM_IRQENABLE_IVA	PRCM_REG32(0x8FC)
-
-/* Modem on 2430 */
-#define CM_FCLKEN_MDM		PRCM_REG32(0xC00)
-#define CM_ICLKEN_MDM		PRCM_REG32(0xC10)
-#define CM_IDLEST_MDM		PRCM_REG32(0xC20)
-#define CM_AUTOIDLE_MDM		PRCM_REG32(0xC30)
-#define CM_CLKSEL_MDM		PRCM_REG32(0xC40)
-#define CM_CLKSTCTRL_MDM	PRCM_REG32(0xC48)
-#define RM_RSTCTRL_MDM		PRCM_REG32(0xC50)
-#define RM_RSTST_MDM		PRCM_REG32(0xC58)
-#define PM_WKEN_MDM		PRCM_REG32(0xCA0)
-#define PM_WKST_MDM		PRCM_REG32(0xCB0)
-#define PM_WKDEP_MDM		PRCM_REG32(0xCC8)
-#define PM_PWSTCTRL_MDM		PRCM_REG32(0xCE0)
-#define PM_PWSTST_MDM		PRCM_REG32(0xCE4)
-
-#define OMAP24XX_L4_IO_BASE	0x48000000
-
-#define DISP_BASE		(OMAP24XX_L4_IO_BASE + 0x50000)
-#define DISP_REG32(offset)	__REG32(DISP_BASE + (offset))
-
-#define OMAP24XX_GPMC_BASE	(L3_24XX_BASE + 0xa000)
-#define GPMC_REG32(offset)	__REG32(OMAP24XX_GPMC_BASE + (offset))
-
-/* FIXME: Move these to timer code */
-#define GPT1_BASE		(0x48028000)
-#define GPT1_REG32(offset)	__REG32(GPT1_BASE + (offset))
-
-/* Misc sysconfig */
-#define DISPC_SYSCONFIG		DISP_REG32(0x410)
-#define SPI_BASE		(OMAP24XX_L4_IO_BASE + 0x98000)
-#define MCSPI1_SYSCONFIG	__REG32(SPI_BASE + 0x10)
-#define MCSPI2_SYSCONFIG	__REG32(SPI_BASE + 0x2000 + 0x10)
-#define MCSPI3_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
-
-#define CAMERA_MMU_SYSCONFIG	__REG32(DISP_BASE + 0x2C10)
-#define CAMERA_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x282C)
-#define SYSTEM_DMA_SYSCONFIG	__REG32(DISP_BASE + 0x602C)
-#define GPMC_SYSCONFIG		GPMC_REG32(0x010)
-#define MAILBOXES_SYSCONFIG	__REG32(OMAP24XX_L4_IO_BASE + 0x94010)
-#define UART1_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
-#define UART2_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
-#define UART3_SYSCONFIG		__REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
-#define SDRC_SYSCONFIG		__REG32(OMAP24XX_SDRC_BASE + 0x10)
-#define OMAP24XX_SMS_BASE	(L3_24XX_BASE + 0x8000)
-#define SMS_SYSCONFIG		__REG32(OMAP24XX_SMS_BASE + 0x10)
-#define SSI_SYSCONFIG		__REG32(DISP_BASE + 0x8010)
-
-/* rkw - good cannidates for PM_ to start what nm was trying */
-#define OMAP24XX_GPT2		(OMAP24XX_L4_IO_BASE + 0x2A000)
-#define OMAP24XX_GPT3		(OMAP24XX_L4_IO_BASE + 0x78000)
-#define OMAP24XX_GPT4		(OMAP24XX_L4_IO_BASE + 0x7A000)
-#define OMAP24XX_GPT5		(OMAP24XX_L4_IO_BASE + 0x7C000)
-#define OMAP24XX_GPT6		(OMAP24XX_L4_IO_BASE + 0x7E000)
-#define OMAP24XX_GPT7		(OMAP24XX_L4_IO_BASE + 0x80000)
-#define OMAP24XX_GPT8		(OMAP24XX_L4_IO_BASE + 0x82000)
-#define OMAP24XX_GPT9		(OMAP24XX_L4_IO_BASE + 0x84000)
-#define OMAP24XX_GPT10		(OMAP24XX_L4_IO_BASE + 0x86000)
-#define OMAP24XX_GPT11		(OMAP24XX_L4_IO_BASE + 0x88000)
-#define OMAP24XX_GPT12		(OMAP24XX_L4_IO_BASE + 0x8A000)
-
-/* FIXME: Move these to timer code */
-#define GPTIMER1_SYSCONFIG	GPT1_REG32(0x010)
-#define GPTIMER2_SYSCONFIG	__REG32(OMAP24XX_GPT2 + 0x10)
-#define GPTIMER3_SYSCONFIG	__REG32(OMAP24XX_GPT3 + 0x10)
-#define GPTIMER4_SYSCONFIG	__REG32(OMAP24XX_GPT4 + 0x10)
-#define GPTIMER5_SYSCONFIG	__REG32(OMAP24XX_GPT5 + 0x10)
-#define GPTIMER6_SYSCONFIG	__REG32(OMAP24XX_GPT6 + 0x10)
-#define GPTIMER7_SYSCONFIG	__REG32(OMAP24XX_GPT7 + 0x10)
-#define GPTIMER8_SYSCONFIG	__REG32(OMAP24XX_GPT8 + 0x10)
-#define GPTIMER9_SYSCONFIG	__REG32(OMAP24XX_GPT9 + 0x10)
-#define GPTIMER10_SYSCONFIG	__REG32(OMAP24XX_GPT10 + 0x10)
-#define GPTIMER11_SYSCONFIG	__REG32(OMAP24XX_GPT11 + 0x10)
-#define GPTIMER12_SYSCONFIG	__REG32(OMAP24XX_GPT12 + 0x10)
-
-/* FIXME: Move these to gpio code */
-#define OMAP24XX_GPIO_BASE	0x48018000
-#define GPIOX_BASE(X)		(OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
-
-#define GPIO1_SYSCONFIG		__REG32((GPIOX_BASE(1) + 0x10))
-#define GPIO2_SYSCONFIG		__REG32((GPIOX_BASE(2) + 0x10))
-#define GPIO3_SYSCONFIG		__REG32((GPIOX_BASE(3) + 0x10))
-#define GPIO4_SYSCONFIG		__REG32((GPIOX_BASE(4) + 0x10))
-
-#if defined(CONFIG_ARCH_OMAP243X)
-#define GPIO5_SYSCONFIG		__REG32((OMAP24XX_GPIO5_BASE + 0x10))
-#endif
-
-/* GP TIMER 1 */
-#define GPTIMER1_TISTAT		GPT1_REG32(0x014)
-#define GPTIMER1_TISR		GPT1_REG32(0x018)
-#define GPTIMER1_TIER		GPT1_REG32(0x01C)
-#define GPTIMER1_TWER		GPT1_REG32(0x020)
-#define GPTIMER1_TCLR		GPT1_REG32(0x024)
-#define GPTIMER1_TCRR		GPT1_REG32(0x028)
-#define GPTIMER1_TLDR		GPT1_REG32(0x02C)
-#define GPTIMER1_TTGR		GPT1_REG32(0x030)
-#define GPTIMER1_TWPS		GPT1_REG32(0x034)
-#define GPTIMER1_TMAR		GPT1_REG32(0x038)
-#define GPTIMER1_TCAR1		GPT1_REG32(0x03C)
-#define GPTIMER1_TSICR		GPT1_REG32(0x040)
-#define GPTIMER1_TCAR2		GPT1_REG32(0x044)
-
-/* rkw -- base fix up please... */
-#define GPTIMER3_TISR		__REG32(OMAP24XX_L4_IO_BASE + 0x78018)
-
-/* SDRC */
-#define SDRC_DLLA_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_DLLA_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x064)
-#define SDRC_DLLB_CTRL		__REG32(OMAP24XX_SDRC_BASE + 0x068)
-#define SDRC_DLLB_STATUS	__REG32(OMAP24XX_SDRC_BASE + 0x06C)
-#define SDRC_POWER		__REG32(OMAP24XX_SDRC_BASE + 0x070)
-#define SDRC_MR_0		__REG32(OMAP24XX_SDRC_BASE + 0x084)
-
-/* GPIO 1 */
-#define GPIO1_BASE		GPIOX_BASE(1)
-#define GPIO1_REG32(offset)	__REG32(GPIO1_BASE + (offset))
-#define GPIO1_IRQENABLE1	GPIO1_REG32(0x01C)
-#define GPIO1_IRQSTATUS1	GPIO1_REG32(0x018)
-#define GPIO1_IRQENABLE2	GPIO1_REG32(0x02C)
-#define GPIO1_IRQSTATUS2	GPIO1_REG32(0x028)
-#define GPIO1_WAKEUPENABLE	GPIO1_REG32(0x020)
-#define GPIO1_RISINGDETECT	GPIO1_REG32(0x048)
-#define GPIO1_DATAIN		GPIO1_REG32(0x038)
-#define GPIO1_OE		GPIO1_REG32(0x034)
-#define GPIO1_DATAOUT		GPIO1_REG32(0x03C)
-
-/* GPIO2 */
-#define GPIO2_BASE		GPIOX_BASE(2)
-#define GPIO2_REG32(offset)	__REG32(GPIO2_BASE + (offset))
-#define GPIO2_IRQENABLE1	GPIO2_REG32(0x01C)
-#define GPIO2_IRQSTATUS1	GPIO2_REG32(0x018)
-#define GPIO2_IRQENABLE2	GPIO2_REG32(0x02C)
-#define GPIO2_IRQSTATUS2	GPIO2_REG32(0x028)
-#define GPIO2_WAKEUPENABLE	GPIO2_REG32(0x020)
-#define GPIO2_RISINGDETECT	GPIO2_REG32(0x048)
-#define GPIO2_DATAIN		GPIO2_REG32(0x038)
-#define GPIO2_OE		GPIO2_REG32(0x034)
-#define GPIO2_DATAOUT		GPIO2_REG32(0x03C)
-#define GPIO2_DEBOUNCENABLE	GPIO2_REG32(0x050)
-#define GPIO2_DEBOUNCINGTIME	GPIO2_REG32(0x054)
-
-/* GPIO 3 */
-#define GPIO3_BASE		GPIOX_BASE(3)
-#define GPIO3_REG32(offset)	__REG32(GPIO3_BASE + (offset))
-#define GPIO3_IRQENABLE1	GPIO3_REG32(0x01C)
-#define GPIO3_IRQSTATUS1	GPIO3_REG32(0x018)
-#define GPIO3_IRQENABLE2	GPIO3_REG32(0x02C)
-#define GPIO3_IRQSTATUS2	GPIO3_REG32(0x028)
-#define GPIO3_WAKEUPENABLE	GPIO3_REG32(0x020)
-#define GPIO3_RISINGDETECT	GPIO3_REG32(0x048)
-#define GPIO3_FALLINGDETECT	GPIO3_REG32(0x04C)
-#define GPIO3_DATAIN		GPIO3_REG32(0x038)
-#define GPIO3_OE		GPIO3_REG32(0x034)
-#define GPIO3_DATAOUT		GPIO3_REG32(0x03C)
-#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
-#define GPIO3_DEBOUNCENABLE	GPIO3_REG32(0x050)
-#define GPIO3_DEBOUNCINGTIME	GPIO3_REG32(0x054)
-
-/* GPIO 4 */
-#define GPIO4_BASE		GPIOX_BASE(4)
-#define GPIO4_REG32(offset)	__REG32(GPIO4_BASE + (offset))
-#define GPIO4_IRQENABLE1	GPIO4_REG32(0x01C)
-#define GPIO4_IRQSTATUS1	GPIO4_REG32(0x018)
-#define GPIO4_IRQENABLE2	GPIO4_REG32(0x02C)
-#define GPIO4_IRQSTATUS2	GPIO4_REG32(0x028)
-#define GPIO4_WAKEUPENABLE	GPIO4_REG32(0x020)
-#define GPIO4_RISINGDETECT	GPIO4_REG32(0x048)
-#define GPIO4_FALLINGDETECT	GPIO4_REG32(0x04C)
-#define GPIO4_DATAIN		GPIO4_REG32(0x038)
-#define GPIO4_OE		GPIO4_REG32(0x034)
-#define GPIO4_DATAOUT		GPIO4_REG32(0x03C)
-#define GPIO4_DEBOUNCENABLE	GPIO4_REG32(0x050)
-#define GPIO4_DEBOUNCINGTIME	GPIO4_REG32(0x054)
-
-#if defined(CONFIG_ARCH_OMAP243X)
-/* GPIO 5 */
-#define GPIO5_REG32(offset)	__REG32((OMAP24XX_GPIO5_BASE + (offset)))
-#define GPIO5_IRQENABLE1	GPIO5_REG32(0x01C)
-#define GPIO5_IRQSTATUS1	GPIO5_REG32(0x018)
-#define GPIO5_IRQENABLE2	GPIO5_REG32(0x02C)
-#define GPIO5_IRQSTATUS2	GPIO5_REG32(0x028)
-#define GPIO5_WAKEUPENABLE	GPIO5_REG32(0x020)
-#define GPIO5_RISINGDETECT	GPIO5_REG32(0x048)
-#define GPIO5_FALLINGDETECT	GPIO5_REG32(0x04C)
-#define GPIO5_DATAIN		GPIO5_REG32(0x038)
-#define GPIO5_OE		GPIO5_REG32(0x034)
-#define GPIO5_DATAOUT		GPIO5_REG32(0x03C)
-#define GPIO5_DEBOUNCENABLE	GPIO5_REG32(0x050)
-#define GPIO5_DEBOUNCINGTIME	GPIO5_REG32(0x054)
-#endif
-
-/* IO CONFIG */
-#define OMAP24XX_CTRL_BASE		(L4_24XX_BASE)
-#define CONTROL_REG32(offset)		__REG32(OMAP24XX_CTRL_BASE + (offset))
-
-#define CONTROL_PADCONF_SPI1_NCS2	CONTROL_REG32(0x104)
-#define CONTROL_PADCONF_SYS_XTALOUT	CONTROL_REG32(0x134)
-#define CONTROL_PADCONF_UART1_RX	CONTROL_REG32(0x0C8)
-#define CONTROL_PADCONF_MCBSP1_DX	CONTROL_REG32(0x10C)
-#define CONTROL_PADCONF_GPMC_NCS4	CONTROL_REG32(0x090)
-#define CONTROL_PADCONF_DSS_D5		CONTROL_REG32(0x0B8)
-#define CONTROL_PADCONF_DSS_D9		CONTROL_REG32(0x0BC)	/* 2420 */
-#define CONTROL_PADCONF_DSS_D13		CONTROL_REG32(0x0C0)
-#define CONTROL_PADCONF_DSS_VSYNC	CONTROL_REG32(0x0CC)
-#define CONTROL_PADCONF_SYS_NIRQW0	CONTROL_REG32(0x0BC)	/* 2430 */
-#define CONTROL_PADCONF_SSI1_FLAG_TX	CONTROL_REG32(0x108)	/* 2430 */
-
-/* CONTROL */
-#define CONTROL_DEVCONF		CONTROL_REG32(0x274)
-#define CONTROL_DEVCONF1	CONTROL_REG32(0x2E8)
-
-/* INTERRUPT CONTROLLER */
-#define INTC_BASE		((L4_24XX_BASE) + 0xfe000)
-#define INTC_REG32(offset)	__REG32(INTC_BASE + (offset))
-
-#define INTC1_U_BASE		INTC_REG32(0x000)
-#define INTC_MIR0		INTC_REG32(0x084)
-#define INTC_MIR_SET0		INTC_REG32(0x08C)
-#define INTC_MIR_CLEAR0		INTC_REG32(0x088)
-#define INTC_ISR_CLEAR0		INTC_REG32(0x094)
-#define INTC_MIR1		INTC_REG32(0x0A4)
-#define INTC_MIR_SET1		INTC_REG32(0x0AC)
-#define INTC_MIR_CLEAR1		INTC_REG32(0x0A8)
-#define INTC_ISR_CLEAR1		INTC_REG32(0x0B4)
-#define INTC_MIR2		INTC_REG32(0x0C4)
-#define INTC_MIR_SET2		INTC_REG32(0x0CC)
-#define INTC_MIR_CLEAR2		INTC_REG32(0x0C8)
-#define INTC_ISR_CLEAR2		INTC_REG32(0x0D4)
-#define INTC_SIR_IRQ		INTC_REG32(0x040)
-#define INTC_CONTROL		INTC_REG32(0x048)
-#define INTC_ILR11		INTC_REG32(0x12C)	/* PRCM on MPU PIC */
-#define INTC_ILR30		INTC_REG32(0x178)
-#define INTC_ILR31		INTC_REG32(0x17C)
-#define INTC_ILR32		INTC_REG32(0x180)
-#define INTC_ILR37		INTC_REG32(0x194)	/* GPIO4 on MPU PIC */
-#define INTC_SYSCONFIG		INTC_REG32(0x010)	/* GPT1 on MPU PIC */
-
-/* RAM FIREWALL */
-#define RAMFW_BASE		(0x68005000)
-#define RAMFW_REG32(offset)	__REG32(RAMFW_BASE + (offset))
-
-#define RAMFW_REQINFOPERM0	RAMFW_REG32(0x048)
-#define RAMFW_READPERM0		RAMFW_REG32(0x050)
-#define RAMFW_WRITEPERM0	RAMFW_REG32(0x058)
-
-/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
-//#define DEBUG_BOARD_LED_REGISTER 0x04000014
-
-/* GPMC CS0 */
-#define GPMC_CONFIG1_0		GPMC_REG32(0x060)
-#define GPMC_CONFIG2_0		GPMC_REG32(0x064)
-#define GPMC_CONFIG3_0		GPMC_REG32(0x068)
-#define GPMC_CONFIG4_0		GPMC_REG32(0x06C)
-#define GPMC_CONFIG5_0		GPMC_REG32(0x070)
-#define GPMC_CONFIG6_0		GPMC_REG32(0x074)
-#define GPMC_CONFIG7_0		GPMC_REG32(0x078)
-
-/* GPMC CS1 */
-#define GPMC_CONFIG1_1		GPMC_REG32(0x090)
-#define GPMC_CONFIG2_1		GPMC_REG32(0x094)
-#define GPMC_CONFIG3_1		GPMC_REG32(0x098)
-#define GPMC_CONFIG4_1		GPMC_REG32(0x09C)
-#define GPMC_CONFIG5_1		GPMC_REG32(0x0a0)
-#define GPMC_CONFIG6_1		GPMC_REG32(0x0a4)
-#define GPMC_CONFIG7_1		GPMC_REG32(0x0a8)
-
-/* GPMC CS3 */
-#define GPMC_CONFIG1_3		GPMC_REG32(0x0F0)
-#define GPMC_CONFIG2_3		GPMC_REG32(0x0F4)
-#define GPMC_CONFIG3_3		GPMC_REG32(0x0F8)
-#define GPMC_CONFIG4_3		GPMC_REG32(0x0FC)
-#define GPMC_CONFIG5_3		GPMC_REG32(0x100)
-#define GPMC_CONFIG6_3		GPMC_REG32(0x104)
-#define GPMC_CONFIG7_3		GPMC_REG32(0x108)
-
-/* DSS */
-#define DSS_CONTROL		DISP_REG32(0x040)
-#define DISPC_CONTROL		DISP_REG32(0x440)
-#define DISPC_SYSSTATUS		DISP_REG32(0x414)
-#define DISPC_IRQSTATUS		DISP_REG32(0x418)
-#define DISPC_IRQENABLE		DISP_REG32(0x41C)
-#define DISPC_CONFIG		DISP_REG32(0x444)
-#define DISPC_DEFAULT_COLOR0	DISP_REG32(0x44C)
-#define DISPC_DEFAULT_COLOR1	DISP_REG32(0x450)
-#define DISPC_TRANS_COLOR0	DISP_REG32(0x454)
-#define DISPC_TRANS_COLOR1	DISP_REG32(0x458)
-#define DISPC_LINE_NUMBER	DISP_REG32(0x460)
-#define DISPC_TIMING_H		DISP_REG32(0x464)
-#define DISPC_TIMING_V		DISP_REG32(0x468)
-#define DISPC_POL_FREQ		DISP_REG32(0x46C)
-#define DISPC_DIVISOR		DISP_REG32(0x470)
-#define DISPC_SIZE_DIG		DISP_REG32(0x478)
-#define DISPC_SIZE_LCD		DISP_REG32(0x47C)
-#define DISPC_GFX_BA0		DISP_REG32(0x480)
-#define DISPC_GFX_BA1		DISP_REG32(0x484)
-#define DISPC_GFX_POSITION	DISP_REG32(0x488)
-#define DISPC_GFX_SIZE		DISP_REG32(0x48C)
-#define DISPC_GFX_ATTRIBUTES	DISP_REG32(0x4A0)
-#define DISPC_GFX_FIFO_THRESHOLD	DISP_REG32(0x4A4)
-#define DISPC_GFX_ROW_INC	DISP_REG32(0x4AC)
-#define DISPC_GFX_PIXEL_INC	DISP_REG32(0x4B0)
-#define DISPC_GFX_WINDOW_SKIP	DISP_REG32(0x4B4)
-#define DISPC_GFX_TABLE_BA	DISP_REG32(0x4B8)
-#define DISPC_DATA_CYCLE1	DISP_REG32(0x5D4)
-#define DISPC_DATA_CYCLE2	DISP_REG32(0x5D8)
-#define DISPC_DATA_CYCLE3	DISP_REG32(0x5DC)
-
-/* HSUSB Suspend */
-#define HSUSB_CTRL		__REG8(0x480AC001)
-#define USBOTG_POWER		__REG32(0x480AC000)
-
-/* HS MMC */
-#define MMCHS1_SYSCONFIG	__REG32(0x4809C010)
-#define MMCHS2_SYSCONFIG	__REG32(0x480b4010)
-
-#endif	/* __ASSEMBLER__ */
-
-#endif
-
-
-
-
-
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index 90f530540c65..b12f423b8595 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -17,19 +17,27 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 
-#include "prcm-regs.h"
+#include <asm/io.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
 
 extern void omap2_clk_prepare_for_reboot(void);
 
 u32 omap_prcm_get_reset_sources(void)
 {
-	return RM_RSTST_WKUP & 0x7f;
+	return prm_read_mod_reg(WKUP_MOD, RM_RSTST) & 0x7f;
 }
 EXPORT_SYMBOL(omap_prcm_get_reset_sources);
 
 /* Resets clock rates and reboots the system. Only called from system.h */
 void omap_prcm_arch_reset(char mode)
 {
+	u32 wkup;
 	omap2_clk_prepare_for_reboot();
-	RM_RSTCTRL_WKUP |= 2;
+
+	if (cpu_is_omap24xx()) {
+		wkup = prm_read_mod_reg(WKUP_MOD, RM_RSTCTRL) | OMAP_RST_DPLL3;
+		prm_write_mod_reg(wkup, WKUP_MOD, RM_RSTCTRL);
+	}
 }
diff --git a/arch/arm/mach-omap2/prm-regbits-24xx.h b/arch/arm/mach-omap2/prm-regbits-24xx.h
new file mode 100644
index 000000000000..c6d17a3378ec
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-24xx.h
@@ -0,0 +1,279 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_24XX_H
+
+/*
+ * OMAP24XX Power/Reset Management register bits
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prm.h"
+
+/* Bits shared between registers */
+
+/* PRCM_IRQSTATUS_MPU, PM_IRQSTATUS_DSP, PRCM_IRQSTATUS_IVA shared bits */
+#define OMAP24XX_VOLTTRANS_ST				(1 << 2)
+#define OMAP24XX_WKUP2_ST				(1 << 1)
+#define OMAP24XX_WKUP1_ST				(1 << 0)
+
+/* PRCM_IRQENABLE_MPU, PM_IRQENABLE_DSP, PRCM_IRQENABLE_IVA shared bits */
+#define OMAP24XX_VOLTTRANS_EN				(1 << 2)
+#define OMAP24XX_WKUP2_EN				(1 << 1)
+#define OMAP24XX_WKUP1_EN				(1 << 0)
+
+/* PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_DSP, PM_WKDEP_MDM shared bits */
+#define OMAP24XX_EN_MPU					(1 << 1)
+#define OMAP24XX_EN_CORE				(1 << 0)
+
+/*
+ * PM_PWSTCTRL_MPU, PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM
+ * shared bits
+ */
+#define OMAP24XX_MEMONSTATE_SHIFT			10
+#define OMAP24XX_MEMONSTATE_MASK			(0x3 << 10)
+#define OMAP24XX_MEMRETSTATE				(1 << 3)
+
+/* PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSP, PM_PWSTCTRL_MDM shared bits */
+#define OMAP24XX_FORCESTATE				(1 << 18)
+
+/*
+ * PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP,
+ * PM_PWSTST_MDM shared bits
+ */
+#define OMAP24XX_CLKACTIVITY				(1 << 19)
+
+/* PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_DSP shared bits */
+#define OMAP24XX_LASTSTATEENTERED_SHIFT			4
+#define OMAP24XX_LASTSTATEENTERED_MASK			(0x3 << 4)
+
+/* PM_PWSTST_MPU and PM_PWSTST_DSP shared bits */
+#define OMAP2430_MEMSTATEST_SHIFT			10
+#define OMAP2430_MEMSTATEST_MASK			(0x3 << 10)
+
+/* PM_PWSTST_GFX, PM_PWSTST_DSP, PM_PWSTST_MDM shared bits */
+#define OMAP24XX_POWERSTATEST_SHIFT			0
+#define OMAP24XX_POWERSTATEST_MASK			(0x3 << 0)
+
+
+/* Bits specific to each register */
+
+/* PRCM_REVISION */
+#define OMAP24XX_REV_SHIFT				0
+#define OMAP24XX_REV_MASK				(0xff << 0)
+
+/* PRCM_SYSCONFIG */
+#define OMAP24XX_AUTOIDLE				(1 << 0)
+
+/* PRCM_IRQSTATUS_MPU specific bits */
+#define OMAP2430_DPLL_RECAL_ST				(1 << 6)
+#define OMAP24XX_TRANSITION_ST				(1 << 5)
+#define OMAP24XX_EVGENOFF_ST				(1 << 4)
+#define OMAP24XX_EVGENON_ST				(1 << 3)
+
+/* PRCM_IRQENABLE_MPU specific bits */
+#define OMAP2430_DPLL_RECAL_EN				(1 << 6)
+#define OMAP24XX_TRANSITION_EN				(1 << 5)
+#define OMAP24XX_EVGENOFF_EN				(1 << 4)
+#define OMAP24XX_EVGENON_EN				(1 << 3)
+
+/* PRCM_VOLTCTRL */
+#define OMAP24XX_AUTO_EXTVOLT				(1 << 15)
+#define OMAP24XX_FORCE_EXTVOLT				(1 << 14)
+#define OMAP24XX_SETOFF_LEVEL_SHIFT			12
+#define OMAP24XX_SETOFF_LEVEL_MASK			(0x3 << 12)
+#define OMAP24XX_MEMRETCTRL				(1 << 8)
+#define OMAP24XX_SETRET_LEVEL_SHIFT			6
+#define OMAP24XX_SETRET_LEVEL_MASK			(0x3 << 6)
+#define OMAP24XX_VOLT_LEVEL_SHIFT			0
+#define OMAP24XX_VOLT_LEVEL_MASK			(0x3 << 0)
+
+/* PRCM_VOLTST */
+#define OMAP24XX_ST_VOLTLEVEL_SHIFT			0
+#define OMAP24XX_ST_VOLTLEVEL_MASK			(0x3 << 0)
+
+/* PRCM_CLKSRC_CTRL specific bits */
+
+/* PRCM_CLKOUT_CTRL */
+#define OMAP2420_CLKOUT2_EN_SHIFT			15
+#define OMAP2420_CLKOUT2_EN				(1 << 15)
+#define OMAP2420_CLKOUT2_DIV_SHIFT			11
+#define OMAP2420_CLKOUT2_DIV_MASK			(0x7 << 11)
+#define OMAP2420_CLKOUT2_SOURCE_SHIFT			8
+#define OMAP2420_CLKOUT2_SOURCE_MASK			(0x3 << 8)
+#define OMAP24XX_CLKOUT_EN_SHIFT			7
+#define OMAP24XX_CLKOUT_EN				(1 << 7)
+#define OMAP24XX_CLKOUT_DIV_SHIFT			3
+#define OMAP24XX_CLKOUT_DIV_MASK			(0x7 << 3)
+#define OMAP24XX_CLKOUT_SOURCE_SHIFT			0
+#define OMAP24XX_CLKOUT_SOURCE_MASK			(0x3 << 0)
+
+/* PRCM_CLKEMUL_CTRL */
+#define OMAP24XX_EMULATION_EN_SHIFT			0
+#define OMAP24XX_EMULATION_EN				(1 << 0)
+
+/* PRCM_CLKCFG_CTRL */
+#define OMAP24XX_VALID_CONFIG				(1 << 0)
+
+/* PRCM_CLKCFG_STATUS */
+#define OMAP24XX_CONFIG_STATUS				(1 << 0)
+
+/* PRCM_VOLTSETUP specific bits */
+
+/* PRCM_CLKSSETUP specific bits */
+
+/* PRCM_POLCTRL */
+#define OMAP2420_CLKOUT2_POL				(1 << 10)
+#define OMAP24XX_CLKOUT_POL				(1 << 9)
+#define OMAP24XX_CLKREQ_POL				(1 << 8)
+#define OMAP2430_USE_POWEROK				(1 << 2)
+#define OMAP2430_POWEROK_POL				(1 << 1)
+#define OMAP24XX_EXTVOL_POL				(1 << 0)
+
+/* RM_RSTST_MPU specific bits */
+/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" instead */
+
+/* PM_WKDEP_MPU specific bits */
+#define OMAP2430_PM_WKDEP_MPU_EN_MDM			(1 << 5)
+#define OMAP24XX_PM_WKDEP_MPU_EN_DSP			(1 << 2)
+
+/* PM_EVGENCTRL_MPU specific bits */
+
+/* PM_EVEGENONTIM_MPU specific bits */
+
+/* PM_EVEGENOFFTIM_MPU specific bits */
+
+/* PM_PWSTCTRL_MPU specific bits */
+#define OMAP2430_FORCESTATE				(1 << 18)
+
+/* PM_PWSTST_MPU specific bits */
+/* INTRANSITION, CLKACTIVITY, POWERSTATE, MEMSTATEST are 2430 only */
+
+/* PM_WKEN1_CORE specific bits */
+
+/* PM_WKEN2_CORE specific bits */
+
+/* PM_WKST1_CORE specific bits*/
+
+/* PM_WKST2_CORE specific bits */
+
+/* PM_WKDEP_CORE specific bits*/
+#define OMAP2430_PM_WKDEP_CORE_EN_MDM			(1 << 5)
+#define OMAP24XX_PM_WKDEP_CORE_EN_GFX			(1 << 3)
+#define OMAP24XX_PM_WKDEP_CORE_EN_DSP			(1 << 2)
+
+/* PM_PWSTCTRL_CORE specific bits */
+#define OMAP24XX_MEMORYCHANGE				(1 << 20)
+#define OMAP24XX_MEM3ONSTATE_SHIFT			14
+#define OMAP24XX_MEM3ONSTATE_MASK			(0x3 << 14)
+#define OMAP24XX_MEM2ONSTATE_SHIFT			12
+#define OMAP24XX_MEM2ONSTATE_MASK			(0x3 << 12)
+#define OMAP24XX_MEM1ONSTATE_SHIFT			10
+#define OMAP24XX_MEM1ONSTATE_MASK			(0x3 << 10)
+#define OMAP24XX_MEM3RETSTATE				(1 << 5)
+#define OMAP24XX_MEM2RETSTATE				(1 << 4)
+#define OMAP24XX_MEM1RETSTATE				(1 << 3)
+
+/* PM_PWSTST_CORE specific bits */
+#define OMAP24XX_MEM3STATEST_SHIFT			14
+#define OMAP24XX_MEM3STATEST_MASK			(0x3 << 14)
+#define OMAP24XX_MEM2STATEST_SHIFT			12
+#define OMAP24XX_MEM2STATEST_MASK			(0x3 << 12)
+#define OMAP24XX_MEM1STATEST_SHIFT			10
+#define OMAP24XX_MEM1STATEST_MASK			(0x3 << 10)
+
+/* RM_RSTCTRL_GFX */
+#define OMAP24XX_GFX_RST				(1 << 0)
+
+/* RM_RSTST_GFX specific bits */
+#define OMAP24XX_GFX_SW_RST				(1 << 4)
+
+/* PM_PWSTCTRL_GFX specific bits */
+
+/* PM_WKDEP_GFX specific bits */
+/* 2430 often calls EN_WAKEUP "EN_WKUP" */
+
+/* RM_RSTCTRL_WKUP specific bits */
+
+/* RM_RSTTIME_WKUP specific bits */
+
+/* RM_RSTST_WKUP specific bits */
+/* 2430 calls EXTWMPU_RST "EXTWARM_RST" and GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP24XX_EXTWMPU_RST				(1 << 6)
+#define OMAP24XX_SECU_WD_RST				(1 << 5)
+#define OMAP24XX_MPU_WD_RST				(1 << 4)
+#define OMAP24XX_SECU_VIOL_RST				(1 << 3)
+
+/* PM_WKEN_WKUP specific bits */
+
+/* PM_WKST_WKUP specific bits */
+
+/* RM_RSTCTRL_DSP */
+#define OMAP2420_RST_IVA				(1 << 8)
+#define OMAP24XX_RST2_DSP				(1 << 1)
+#define OMAP24XX_RST1_DSP				(1 << 0)
+
+/* RM_RSTST_DSP specific bits */
+/* 2430 calls GLOBALWMPU_RST "GLOBALWARM_RST" */
+#define OMAP2420_IVA_SW_RST				(1 << 8)
+#define OMAP24XX_DSP_SW_RST2				(1 << 5)
+#define OMAP24XX_DSP_SW_RST1				(1 << 4)
+
+/* PM_WKDEP_DSP specific bits */
+
+/* PM_PWSTCTRL_DSP specific bits */
+/* 2430 only: MEMONSTATE, MEMRETSTATE */
+#define OMAP2420_MEMIONSTATE_SHIFT			12
+#define OMAP2420_MEMIONSTATE_MASK			(0x3 << 12)
+#define OMAP2420_MEMIRETSTATE				(1 << 4)
+
+/* PM_PWSTST_DSP specific bits */
+/* MEMSTATEST is 2430 only */
+#define OMAP2420_MEMISTATEST_SHIFT			12
+#define OMAP2420_MEMISTATEST_MASK			(0x3 << 12)
+
+/* PRCM_IRQSTATUS_DSP specific bits */
+
+/* PRCM_IRQENABLE_DSP specific bits */
+
+/* RM_RSTCTRL_MDM */
+/* 2430 only */
+#define OMAP2430_PWRON1_MDM				(1 << 1)
+#define OMAP2430_RST1_MDM				(1 << 0)
+
+/* RM_RSTST_MDM specific bits */
+/* 2430 only */
+#define OMAP2430_MDM_SECU_VIOL				(1 << 6)
+#define OMAP2430_MDM_SW_PWRON1				(1 << 5)
+#define OMAP2430_MDM_SW_RST1				(1 << 4)
+
+/* PM_WKEN_MDM */
+/* 2430 only */
+#define OMAP2430_PM_WKEN_MDM_EN_MDM			(1 << 0)
+
+/* PM_WKST_MDM specific bits */
+/* 2430 only */
+
+/* PM_WKDEP_MDM specific bits */
+/* 2430 only */
+
+/* PM_PWSTCTRL_MDM specific bits */
+/* 2430 only */
+#define OMAP2430_KILLDOMAINWKUP				(1 << 19)
+
+/* PM_PWSTST_MDM specific bits */
+/* 2430 only */
+
+/* PRCM_IRQSTATUS_IVA */
+/* 2420 only */
+
+/* PRCM_IRQENABLE_IVA */
+/* 2420 only */
+
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
new file mode 100644
index 000000000000..b4686bc345ca
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -0,0 +1,582 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_34XX_H
+
+/*
+ * OMAP3430 Power/Reset Management register bits
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prm.h"
+
+/* Shared register bits */
+
+/* PRM_VC_CMD_VAL_0, PRM_VC_CMD_VAL_1 shared bits */
+#define OMAP3430_ON_SHIFT				24
+#define OMAP3430_ON_MASK				(0xff << 24)
+#define OMAP3430_ONLP_SHIFT				16
+#define OMAP3430_ONLP_MASK				(0xff << 16)
+#define OMAP3430_RET_SHIFT				8
+#define OMAP3430_RET_MASK				(0xff << 8)
+#define OMAP3430_OFF_SHIFT				0
+#define OMAP3430_OFF_MASK				(0xff << 0)
+
+/* PRM_VP1_CONFIG, PRM_VP2_CONFIG shared bits */
+#define OMAP3430_ERROROFFSET_SHIFT			24
+#define OMAP3430_ERROROFFSET_MASK			(0xff << 24)
+#define OMAP3430_ERRORGAIN_SHIFT			16
+#define OMAP3430_ERRORGAIN_MASK				(0xff << 16)
+#define OMAP3430_INITVOLTAGE_SHIFT			8
+#define OMAP3430_INITVOLTAGE_MASK			(0xff << 8)
+#define OMAP3430_TIMEOUTEN				(1 << 3)
+#define OMAP3430_INITVDD				(1 << 2)
+#define OMAP3430_FORCEUPDATE				(1 << 1)
+#define OMAP3430_VPENABLE				(1 << 0)
+
+/* PRM_VP1_VSTEPMIN, PRM_VP2_VSTEPMIN shared bits */
+#define OMAP3430_SMPSWAITTIMEMIN_SHIFT			8
+#define OMAP3430_SMPSWAITTIMEMIN_MASK			(0xffff << 8)
+#define OMAP3430_VSTEPMIN_SHIFT				0
+#define OMAP3430_VSTEPMIN_MASK				(0xff << 0)
+
+/* PRM_VP1_VSTEPMAX, PRM_VP2_VSTEPMAX shared bits */
+#define OMAP3430_SMPSWAITTIMEMAX_SHIFT			8
+#define OMAP3430_SMPSWAITTIMEMAX_MASK			(0xffff << 8)
+#define OMAP3430_VSTEPMAX_SHIFT				0
+#define OMAP3430_VSTEPMAX_MASK				(0xff << 0)
+
+/* PRM_VP1_VLIMITTO, PRM_VP2_VLIMITTO shared bits */
+#define OMAP3430_VDDMAX_SHIFT				24
+#define OMAP3430_VDDMAX_MASK				(0xff << 24)
+#define OMAP3430_VDDMIN_SHIFT				16
+#define OMAP3430_VDDMIN_MASK				(0xff << 16)
+#define OMAP3430_TIMEOUT_SHIFT				0
+#define OMAP3430_TIMEOUT_MASK				(0xffff << 0)
+
+/* PRM_VP1_VOLTAGE, PRM_VP2_VOLTAGE shared bits */
+#define OMAP3430_VPVOLTAGE_SHIFT			0
+#define OMAP3430_VPVOLTAGE_MASK				(0xff << 0)
+
+/* PRM_VP1_STATUS, PRM_VP2_STATUS shared bits */
+#define OMAP3430_VPINIDLE				(1 << 0)
+
+/* PM_WKDEP_IVA2, PM_WKDEP_MPU shared bits */
+#define OMAP3430_EN_PER					(1 << 7)
+
+/* PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE shared bits */
+#define OMAP3430_MEMORYCHANGE				(1 << 3)
+
+/* PM_PWSTST_IVA2, PM_PWSTST_CORE shared bits */
+#define OMAP3430_LOGICSTATEST				(1 << 2)
+
+/* PM_PREPWSTST_IVA2, PM_PREPWSTST_CORE shared bits */
+#define OMAP3430_LASTLOGICSTATEENTERED				(1 << 2)
+
+/*
+ * PM_PREPWSTST_IVA2, PM_PREPWSTST_MPU, PM_PREPWSTST_CORE,
+ * PM_PREPWSTST_GFX, PM_PREPWSTST_DSS, PM_PREPWSTST_CAM,
+ * PM_PREPWSTST_PER, PM_PREPWSTST_NEON shared bits
+ */
+#define OMAP3430_LASTPOWERSTATEENTERED_SHIFT			0
+#define OMAP3430_LASTPOWERSTATEENTERED_MASK			(0x3 << 0)
+
+/* PRM_IRQSTATUS_IVA2, PRM_IRQSTATUS_MPU shared bits */
+#define OMAP3430_WKUP_ST				(1 << 0)
+
+/* PRM_IRQENABLE_IVA2, PRM_IRQENABLE_MPU shared bits */
+#define OMAP3430_WKUP_EN					(1 << 0)
+
+/* PM_MPUGRPSEL1_CORE, PM_IVA2GRPSEL1_CORE shared bits */
+#define OMAP3430_GRPSEL_MMC2				(1 << 25)
+#define OMAP3430_GRPSEL_MMC1				(1 << 24)
+#define OMAP3430_GRPSEL_MCSPI4				(1 << 21)
+#define OMAP3430_GRPSEL_MCSPI3				(1 << 20)
+#define OMAP3430_GRPSEL_MCSPI2				(1 << 19)
+#define OMAP3430_GRPSEL_MCSPI1				(1 << 18)
+#define OMAP3430_GRPSEL_I2C3				(1 << 17)
+#define OMAP3430_GRPSEL_I2C2				(1 << 16)
+#define OMAP3430_GRPSEL_I2C1				(1 << 15)
+#define OMAP3430_GRPSEL_UART2				(1 << 14)
+#define OMAP3430_GRPSEL_UART1				(1 << 13)
+#define OMAP3430_GRPSEL_GPT11				(1 << 12)
+#define OMAP3430_GRPSEL_GPT10				(1 << 11)
+#define OMAP3430_GRPSEL_MCBSP5				(1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1				(1 << 9)
+#define OMAP3430_GRPSEL_HSOTGUSB			(1 << 4)
+#define OMAP3430_GRPSEL_D2D				(1 << 3)
+
+/*
+ * PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM,
+ * PM_PWSTCTRL_PER shared bits
+ */
+#define OMAP3430_MEMONSTATE_SHIFT			16
+#define OMAP3430_MEMONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_MEMRETSTATE				(1 << 8)
+
+/* PM_MPUGRPSEL_PER, PM_IVA2GRPSEL_PER shared bits */
+#define OMAP3430_GRPSEL_GPIO6				(1 << 17)
+#define OMAP3430_GRPSEL_GPIO5				(1 << 16)
+#define OMAP3430_GRPSEL_GPIO4				(1 << 15)
+#define OMAP3430_GRPSEL_GPIO3				(1 << 14)
+#define OMAP3430_GRPSEL_GPIO2				(1 << 13)
+#define OMAP3430_GRPSEL_UART3				(1 << 11)
+#define OMAP3430_GRPSEL_GPT9				(1 << 10)
+#define OMAP3430_GRPSEL_GPT8				(1 << 9)
+#define OMAP3430_GRPSEL_GPT7				(1 << 8)
+#define OMAP3430_GRPSEL_GPT6				(1 << 7)
+#define OMAP3430_GRPSEL_GPT5				(1 << 6)
+#define OMAP3430_GRPSEL_GPT4				(1 << 5)
+#define OMAP3430_GRPSEL_GPT3				(1 << 4)
+#define OMAP3430_GRPSEL_GPT2				(1 << 3)
+#define OMAP3430_GRPSEL_MCBSP4				(1 << 2)
+#define OMAP3430_GRPSEL_MCBSP3				(1 << 1)
+#define OMAP3430_GRPSEL_MCBSP2				(1 << 0)
+
+/* PM_MPUGRPSEL_WKUP, PM_IVA2GRPSEL_WKUP shared bits */
+#define OMAP3430_GRPSEL_IO				(1 << 8)
+#define OMAP3430_GRPSEL_SR2				(1 << 7)
+#define OMAP3430_GRPSEL_SR1				(1 << 6)
+#define OMAP3430_GRPSEL_GPIO1				(1 << 3)
+#define OMAP3430_GRPSEL_GPT12				(1 << 1)
+#define OMAP3430_GRPSEL_GPT1				(1 << 0)
+
+/* Bits specific to each register */
+
+/* RM_RSTCTRL_IVA2 */
+#define OMAP3430_RST3_IVA2				(1 << 2)
+#define OMAP3430_RST2_IVA2				(1 << 1)
+#define OMAP3430_RST1_IVA2				(1 << 0)
+
+/* RM_RSTST_IVA2 specific bits */
+#define OMAP3430_EMULATION_VSEQ_RST			(1 << 13)
+#define OMAP3430_EMULATION_VHWA_RST			(1 << 12)
+#define OMAP3430_EMULATION_IVA2_RST			(1 << 11)
+#define OMAP3430_IVA2_SW_RST3				(1 << 10)
+#define OMAP3430_IVA2_SW_RST2				(1 << 9)
+#define OMAP3430_IVA2_SW_RST1				(1 << 8)
+
+/* PM_WKDEP_IVA2 specific bits */
+
+/* PM_PWSTCTRL_IVA2 specific bits */
+#define OMAP3430_L2FLATMEMONSTATE_SHIFT			22
+#define OMAP3430_L2FLATMEMONSTATE_MASK			(0x3 << 22)
+#define OMAP3430_SHAREDL2CACHEFLATONSTATE_SHIFT		20
+#define OMAP3430_SHAREDL2CACHEFLATONSTATE_MASK		(0x3 << 20)
+#define OMAP3430_L1FLATMEMONSTATE_SHIFT			18
+#define OMAP3430_L1FLATMEMONSTATE_MASK			(0x3 << 18)
+#define OMAP3430_SHAREDL1CACHEFLATONSTATE_SHIFT		16
+#define OMAP3430_SHAREDL1CACHEFLATONSTATE_MASK		(0x3 << 16)
+#define OMAP3430_L2FLATMEMRETSTATE			(1 << 11)
+#define OMAP3430_SHAREDL2CACHEFLATRETSTATE		(1 << 10)
+#define OMAP3430_L1FLATMEMRETSTATE			(1 << 9)
+#define OMAP3430_SHAREDL1CACHEFLATRETSTATE		(1 << 8)
+
+/* PM_PWSTST_IVA2 specific bits */
+#define OMAP3430_L2FLATMEMSTATEST_SHIFT			10
+#define OMAP3430_L2FLATMEMSTATEST_MASK			(0x3 << 10)
+#define OMAP3430_SHAREDL2CACHEFLATSTATEST_SHIFT		8
+#define OMAP3430_SHAREDL2CACHEFLATSTATEST_MASK		(0x3 << 8)
+#define OMAP3430_L1FLATMEMSTATEST_SHIFT			6
+#define OMAP3430_L1FLATMEMSTATEST_MASK			(0x3 << 6)
+#define OMAP3430_SHAREDL1CACHEFLATSTATEST_SHIFT		4
+#define OMAP3430_SHAREDL1CACHEFLATSTATEST_MASK		(0x3 << 4)
+
+/* PM_PREPWSTST_IVA2 specific bits */
+#define OMAP3430_LASTL2FLATMEMSTATEENTERED_SHIFT		10
+#define OMAP3430_LASTL2FLATMEMSTATEENTERED_MASK			(0x3 << 10)
+#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_SHIFT	8
+#define OMAP3430_LASTSHAREDL2CACHEFLATSTATEENTERED_MASK		(0x3 << 8)
+#define OMAP3430_LASTL1FLATMEMSTATEENTERED_SHIFT		6
+#define OMAP3430_LASTL1FLATMEMSTATEENTERED_MASK			(0x3 << 6)
+#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_SHIFT	4
+#define OMAP3430_LASTSHAREDL1CACHEFLATSTATEENTERED_MASK		(0x3 << 4)
+
+/* PRM_IRQSTATUS_IVA2 specific bits */
+#define OMAP3430_PRM_IRQSTATUS_IVA2_IVA2_DPLL_ST	(1 << 2)
+#define OMAP3430_FORCEWKUP_ST				(1 << 1)
+
+/* PRM_IRQENABLE_IVA2 specific bits */
+#define OMAP3430_PRM_IRQENABLE_IVA2_IVA2_DPLL_RECAL_EN		(1 << 2)
+#define OMAP3430_FORCEWKUP_EN					(1 << 1)
+
+/* PRM_REVISION specific bits */
+
+/* PRM_SYSCONFIG specific bits */
+
+/* PRM_IRQSTATUS_MPU specific bits */
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT		25
+#define OMAP3430ES2_SND_PERIPH_DPLL_ST			(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_ST			(1 << 24)
+#define OMAP3430_VC_RAERR_ST				(1 << 23)
+#define OMAP3430_VC_SAERR_ST				(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_ST			(1 << 21)
+#define OMAP3430_VP2_EQVALUE_ST				(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_ST			(1 << 19)
+#define OMAP3430_VP2_MAXVDD_ST				(1 << 18)
+#define OMAP3430_VP2_MINVDD_ST				(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_ST			(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_ST			(1 << 15)
+#define OMAP3430_VP1_EQVALUE_ST				(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_ST			(1 << 13)
+#define OMAP3430_VP1_MAXVDD_ST				(1 << 12)
+#define OMAP3430_VP1_MINVDD_ST				(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_ST			(1 << 10)
+#define OMAP3430_IO_ST					(1 << 9)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST		(1 << 8)
+#define OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT	8
+#define OMAP3430_MPU_DPLL_ST				(1 << 7)
+#define OMAP3430_MPU_DPLL_ST_SHIFT			7
+#define OMAP3430_PERIPH_DPLL_ST				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_ST_SHIFT			6
+#define OMAP3430_CORE_DPLL_ST				(1 << 5)
+#define OMAP3430_CORE_DPLL_ST_SHIFT			5
+#define OMAP3430_TRANSITION_ST				(1 << 4)
+#define OMAP3430_EVGENOFF_ST				(1 << 3)
+#define OMAP3430_EVGENON_ST				(1 << 2)
+#define OMAP3430_FS_USB_WKUP_ST				(1 << 1)
+
+/* PRM_IRQENABLE_MPU specific bits */
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT		25
+#define OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN			(1 << 25)
+#define OMAP3430_VC_TIMEOUTERR_EN				(1 << 24)
+#define OMAP3430_VC_RAERR_EN					(1 << 23)
+#define OMAP3430_VC_SAERR_EN					(1 << 22)
+#define OMAP3430_VP2_TRANXDONE_EN				(1 << 21)
+#define OMAP3430_VP2_EQVALUE_EN					(1 << 20)
+#define OMAP3430_VP2_NOSMPSACK_EN				(1 << 19)
+#define OMAP3430_VP2_MAXVDD_EN					(1 << 18)
+#define OMAP3430_VP2_MINVDD_EN					(1 << 17)
+#define OMAP3430_VP2_OPPCHANGEDONE_EN				(1 << 16)
+#define OMAP3430_VP1_TRANXDONE_EN				(1 << 15)
+#define OMAP3430_VP1_EQVALUE_EN					(1 << 14)
+#define OMAP3430_VP1_NOSMPSACK_EN				(1 << 13)
+#define OMAP3430_VP1_MAXVDD_EN					(1 << 12)
+#define OMAP3430_VP1_MINVDD_EN					(1 << 11)
+#define OMAP3430_VP1_OPPCHANGEDONE_EN				(1 << 10)
+#define OMAP3430_IO_EN						(1 << 9)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN		(1 << 8)
+#define OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT	8
+#define OMAP3430_MPU_DPLL_RECAL_EN				(1 << 7)
+#define OMAP3430_MPU_DPLL_RECAL_EN_SHIFT			7
+#define OMAP3430_PERIPH_DPLL_RECAL_EN				(1 << 6)
+#define OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT			6
+#define OMAP3430_CORE_DPLL_RECAL_EN				(1 << 5)
+#define OMAP3430_CORE_DPLL_RECAL_EN_SHIFT			5
+#define OMAP3430_TRANSITION_EN					(1 << 4)
+#define OMAP3430_EVGENOFF_EN					(1 << 3)
+#define OMAP3430_EVGENON_EN					(1 << 2)
+#define OMAP3430_FS_USB_WKUP_EN					(1 << 1)
+
+/* RM_RSTST_MPU specific bits */
+#define OMAP3430_EMULATION_MPU_RST			(1 << 11)
+
+/* PM_WKDEP_MPU specific bits */
+#define OMAP3430_PM_WKDEP_MPU_EN_DSS			(1 << 5)
+#define OMAP3430_PM_WKDEP_MPU_EN_IVA2			(1 << 2)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP3430_OFFLOADMODE_SHIFT			3
+#define OMAP3430_OFFLOADMODE_MASK			(0x3 << 3)
+#define OMAP3430_ONLOADMODE_SHIFT			1
+#define OMAP3430_ONLOADMODE_MASK			(0x3 << 1)
+#define OMAP3430_ENABLE					(1 << 0)
+
+/* PM_EVGENONTIM_MPU */
+#define OMAP3430_ONTIMEVAL_SHIFT			0
+#define OMAP3430_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+#define OMAP3430_OFFTIMEVAL_SHIFT			0
+#define OMAP3430_OFFTIMEVAL_MASK			(0xffffffff << 0)
+
+/* PM_PWSTCTRL_MPU specific bits */
+#define OMAP3430_L2CACHEONSTATE_SHIFT			16
+#define OMAP3430_L2CACHEONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_L2CACHERETSTATE			(1 << 8)
+#define OMAP3430_LOGICL1CACHERETSTATE			(1 << 2)
+
+/* PM_PWSTST_MPU specific bits */
+#define OMAP3430_L2CACHESTATEST_SHIFT			6
+#define OMAP3430_L2CACHESTATEST_MASK			(0x3 << 6)
+#define OMAP3430_LOGICL1CACHESTATEST			(1 << 2)
+
+/* PM_PREPWSTST_MPU specific bits */
+#define OMAP3430_LASTL2CACHESTATEENTERED_SHIFT		6
+#define OMAP3430_LASTL2CACHESTATEENTERED_MASK		(0x3 << 6)
+#define OMAP3430_LASTLOGICL1CACHESTATEENTERED		(1 << 2)
+
+/* RM_RSTCTRL_CORE */
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON		(1 << 1)
+#define OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST			(1 << 0)
+
+/* RM_RSTST_CORE specific bits */
+#define OMAP3430_MODEM_SECURITY_VIOL_RST		(1 << 10)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RSTPWRON	(1 << 9)
+#define OMAP3430_RM_RSTST_CORE_MODEM_SW_RST		(1 << 8)
+
+/* PM_WKEN1_CORE specific bits */
+
+/* PM_MPUGRPSEL1_CORE specific bits */
+#define OMAP3430_GRPSEL_FSHOSTUSB			(1 << 5)
+
+/* PM_IVA2GRPSEL1_CORE specific bits */
+
+/* PM_WKST1_CORE specific bits */
+
+/* PM_PWSTCTRL_CORE specific bits */
+#define OMAP3430_MEM2ONSTATE_SHIFT			18
+#define OMAP3430_MEM2ONSTATE_MASK			(0x3 << 18)
+#define OMAP3430_MEM1ONSTATE_SHIFT			16
+#define OMAP3430_MEM1ONSTATE_MASK			(0x3 << 16)
+#define OMAP3430_MEM2RETSTATE				(1 << 9)
+#define OMAP3430_MEM1RETSTATE				(1 << 8)
+
+/* PM_PWSTST_CORE specific bits */
+#define OMAP3430_MEM2STATEST_SHIFT			6
+#define OMAP3430_MEM2STATEST_MASK			(0x3 << 6)
+#define OMAP3430_MEM1STATEST_SHIFT			4
+#define OMAP3430_MEM1STATEST_MASK			(0x3 << 4)
+
+/* PM_PREPWSTST_CORE specific bits */
+#define OMAP3430_LASTMEM2STATEENTERED_SHIFT		6
+#define OMAP3430_LASTMEM2STATEENTERED_MASK		(0x3 << 6)
+#define OMAP3430_LASTMEM1STATEENTERED_SHIFT		4
+#define OMAP3430_LASTMEM1STATEENTERED_MASK		(0x3 << 4)
+
+/* RM_RSTST_GFX specific bits */
+
+/* PM_WKDEP_GFX specific bits */
+#define OMAP3430_PM_WKDEP_GFX_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_GFX specific bits */
+
+/* PM_PWSTST_GFX specific bits */
+
+/* PM_PREPWSTST_GFX specific bits */
+
+/* PM_WKEN_WKUP specific bits */
+#define OMAP3430_EN_IO					(1 << 8)
+
+/* PM_MPUGRPSEL_WKUP specific bits */
+
+/* PM_IVA2GRPSEL_WKUP specific bits */
+
+/* PM_WKST_WKUP specific bits */
+#define OMAP3430_ST_IO					(1 << 8)
+
+/* PRM_CLKSEL */
+#define OMAP3430_SYS_CLKIN_SEL_SHIFT			0
+#define OMAP3430_SYS_CLKIN_SEL_MASK			(0x7 << 0)
+
+/* PRM_CLKOUT_CTRL */
+#define OMAP3430_CLKOUT_EN				(1 << 7)
+#define OMAP3430_CLKOUT_EN_SHIFT			7
+
+/* RM_RSTST_DSS specific bits */
+
+/* PM_WKEN_DSS */
+#define OMAP3430_PM_WKEN_DSS_EN_DSS			(1 << 0)
+
+/* PM_WKDEP_DSS specific bits */
+#define OMAP3430_PM_WKDEP_DSS_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_DSS specific bits */
+
+/* PM_PWSTST_DSS specific bits */
+
+/* PM_PREPWSTST_DSS specific bits */
+
+/* RM_RSTST_CAM specific bits */
+
+/* PM_WKDEP_CAM specific bits */
+#define OMAP3430_PM_WKDEP_CAM_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_CAM specific bits */
+
+/* PM_PWSTST_CAM specific bits */
+
+/* PM_PREPWSTST_CAM specific bits */
+
+/* PM_PWSTCTRL_USBHOST specific bits */
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT		(1 << 4)
+
+/* RM_RSTST_PER specific bits */
+
+/* PM_WKEN_PER specific bits */
+
+/* PM_MPUGRPSEL_PER specific bits */
+
+/* PM_IVA2GRPSEL_PER specific bits */
+
+/* PM_WKST_PER specific bits */
+
+/* PM_WKDEP_PER specific bits */
+#define OMAP3430_PM_WKDEP_PER_EN_IVA2			(1 << 2)
+
+/* PM_PWSTCTRL_PER specific bits */
+
+/* PM_PWSTST_PER specific bits */
+
+/* PM_PREPWSTST_PER specific bits */
+
+/* RM_RSTST_EMU specific bits */
+
+/* PM_PWSTST_EMU specific bits */
+
+/* PRM_VC_SMPS_SA */
+#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
+#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
+#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
+#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
+
+/* PRM_VC_SMPS_VOL_RA */
+#define OMAP3430_VOLRA1_SHIFT				16
+#define OMAP3430_VOLRA1_MASK				(0xff << 16)
+#define OMAP3430_VOLRA0_SHIFT				0
+#define OMAP3430_VOLRA0_MASK				(0xff << 0)
+
+/* PRM_VC_SMPS_CMD_RA */
+#define OMAP3430_CMDRA1_SHIFT				16
+#define OMAP3430_CMDRA1_MASK				(0xff << 16)
+#define OMAP3430_CMDRA0_SHIFT				0
+#define OMAP3430_CMDRA0_MASK				(0xff << 0)
+
+/* PRM_VC_CMD_VAL_0 specific bits */
+
+/* PRM_VC_CMD_VAL_1 specific bits */
+
+/* PRM_VC_CH_CONF */
+#define OMAP3430_CMD1					(1 << 20)
+#define OMAP3430_RACEN1					(1 << 19)
+#define OMAP3430_RAC1					(1 << 18)
+#define OMAP3430_RAV1					(1 << 17)
+#define OMAP3430_PRM_VC_CH_CONF_SA1			(1 << 16)
+#define OMAP3430_CMD0					(1 << 4)
+#define OMAP3430_RACEN0					(1 << 3)
+#define OMAP3430_RAC0					(1 << 2)
+#define OMAP3430_RAV0					(1 << 1)
+#define OMAP3430_PRM_VC_CH_CONF_SA0			(1 << 0)
+
+/* PRM_VC_I2C_CFG */
+#define OMAP3430_HSMASTER				(1 << 5)
+#define OMAP3430_SREN					(1 << 4)
+#define OMAP3430_HSEN					(1 << 3)
+#define OMAP3430_MCODE_SHIFT				0
+#define OMAP3430_MCODE_MASK				(0x7 << 0)
+
+/* PRM_VC_BYPASS_VAL */
+#define OMAP3430_VALID					(1 << 24)
+#define OMAP3430_DATA_SHIFT				16
+#define OMAP3430_DATA_MASK				(0xff << 16)
+#define OMAP3430_REGADDR_SHIFT				8
+#define OMAP3430_REGADDR_MASK				(0xff << 8)
+#define OMAP3430_SLAVEADDR_SHIFT			0
+#define OMAP3430_SLAVEADDR_MASK				(0x7f << 0)
+
+/* PRM_RSTCTRL */
+#define OMAP3430_RST_DPLL3				(1 << 2)
+#define OMAP3430_RST_GS					(1 << 1)
+
+/* PRM_RSTTIME */
+#define OMAP3430_RSTTIME2_SHIFT				8
+#define OMAP3430_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP3430_RSTTIME1_SHIFT				0
+#define OMAP3430_RSTTIME1_MASK				(0xff << 0)
+
+/* PRM_RSTST */
+#define OMAP3430_ICECRUSHER_RST				(1 << 10)
+#define OMAP3430_ICEPICK_RST				(1 << 9)
+#define OMAP3430_VDD2_VOLTAGE_MANAGER_RST		(1 << 8)
+#define OMAP3430_VDD1_VOLTAGE_MANAGER_RST		(1 << 7)
+#define OMAP3430_EXTERNAL_WARM_RST			(1 << 6)
+#define OMAP3430_SECURE_WD_RST				(1 << 5)
+#define OMAP3430_MPU_WD_RST				(1 << 4)
+#define OMAP3430_SECURITY_VIOL_RST			(1 << 3)
+#define OMAP3430_GLOBAL_SW_RST				(1 << 1)
+#define OMAP3430_GLOBAL_COLD_RST			(1 << 0)
+
+/* PRM_VOLTCTRL */
+#define OMAP3430_SEL_VMODE				(1 << 4)
+#define OMAP3430_SEL_OFF				(1 << 3)
+#define OMAP3430_AUTO_OFF				(1 << 2)
+#define OMAP3430_AUTO_RET				(1 << 1)
+#define OMAP3430_AUTO_SLEEP				(1 << 0)
+
+/* PRM_SRAM_PCHARGE */
+#define OMAP3430_PCHARGE_TIME_SHIFT			0
+#define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
+
+/* PRM_CLKSRC_CTRL */
+#define OMAP3430_SYSCLKDIV_SHIFT			6
+#define OMAP3430_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP3430_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP3430_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP3430_SYSCLKSEL_SHIFT			0
+#define OMAP3430_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PRM_VOLTSETUP1 */
+#define OMAP3430_SETUP_TIME2_SHIFT			16
+#define OMAP3430_SETUP_TIME2_MASK			(0xffff << 16)
+#define OMAP3430_SETUP_TIME1_SHIFT			0
+#define OMAP3430_SETUP_TIME1_MASK			(0xffff << 0)
+
+/* PRM_VOLTOFFSET */
+#define OMAP3430_OFFSET_TIME_SHIFT			0
+#define OMAP3430_OFFSET_TIME_MASK			(0xffff << 0)
+
+/* PRM_CLKSETUP */
+#define OMAP3430_SETUP_TIME_SHIFT			0
+#define OMAP3430_SETUP_TIME_MASK			(0xffff << 0)
+
+/* PRM_POLCTRL */
+#define OMAP3430_OFFMODE_POL				(1 << 3)
+#define OMAP3430_CLKOUT_POL				(1 << 2)
+#define OMAP3430_CLKREQ_POL				(1 << 1)
+#define OMAP3430_EXTVOL_POL				(1 << 0)
+
+/* PRM_VOLTSETUP2 */
+#define OMAP3430_OFFMODESETUPTIME_SHIFT			0
+#define OMAP3430_OFFMODESETUPTIME_MASK			(0xffff << 0)
+
+/* PRM_VP1_CONFIG specific bits */
+
+/* PRM_VP1_VSTEPMIN specific bits */
+
+/* PRM_VP1_VSTEPMAX specific bits */
+
+/* PRM_VP1_VLIMITTO specific bits */
+
+/* PRM_VP1_VOLTAGE specific bits */
+
+/* PRM_VP1_STATUS specific bits */
+
+/* PRM_VP2_CONFIG specific bits */
+
+/* PRM_VP2_VSTEPMIN specific bits */
+
+/* PRM_VP2_VSTEPMAX specific bits */
+
+/* PRM_VP2_VLIMITTO specific bits */
+
+/* PRM_VP2_VOLTAGE specific bits */
+
+/* PRM_VP2_STATUS specific bits */
+
+/* RM_RSTST_NEON specific bits */
+
+/* PM_WKDEP_NEON specific bits */
+
+/* PM_PWSTCTRL_NEON specific bits */
+
+/* PM_PWSTST_NEON specific bits */
+
+/* PM_PREPWSTST_NEON specific bits */
+
+#endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
new file mode 100644
index 000000000000..ab7649afd891
--- /dev/null
+++ b/arch/arm/mach-omap2/prm.h
@@ -0,0 +1,316 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_H
+
+/*
+ * OMAP2/3 Power/Reset Management (PRM) register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "prcm-common.h"
+
+#ifndef __ASSEMBLER__
+#define OMAP_PRM_REGADDR(module, reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
+#else
+#define OMAP2420_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+#define OMAP2430_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+#define OMAP34XX_PRM_REGADDR(module, reg)				\
+			IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+#endif
+
+/*
+ * Architecture-specific global PRM registers
+ * Use prm_{read,write}_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * PRCM_* on 24xx, and PRM_* on 34xx.  (The exceptions are the
+ * IRQSTATUS and IRQENABLE bits.)
+ *
+ */
+
+#define OMAP24XX_PRCM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP24XX_PRCM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP24XX_PRCM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP24XX_PRCM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP24XX_PRCM_VOLTCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP24XX_PRCM_VOLTST		OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP24XX_PRCM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP24XX_PRCM_CLKCFG_CTRL	OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP24XX_PRCM_CLKCFG_STATUS	OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP24XX_PRCM_VOLTSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP24XX_PRCM_CLKSSETUP		OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP24XX_PRCM_POLCTRL		OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3430_PRM_REVISION		OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3430_PRM_SYSCONFIG		OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3430_PRM_IRQSTATUS_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3430_PRM_IRQENABLE_MPU	OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3430_PRM_VC_SMPS_SA		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3430_PRM_VC_SMPS_VOL_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3430_PRM_VC_SMPS_CMD_RA	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3430_PRM_VC_CMD_VAL_0	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3430_PRM_VC_CMD_VAL_1	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3430_PRM_VC_CH_CONF		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3430_PRM_VC_I2C_CFG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3430_PRM_VC_BYPASS_VAL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3430_PRM_RSTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3430_PRM_RSTTIME		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3430_PRM_RSTST		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3430_PRM_VOLTCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3430_PRM_SRAM_PCHARGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3430_PRM_CLKSRC_CTRL	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3430_PRM_VOLTSETUP1		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3430_PRM_VOLTOFFSET		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3430_PRM_CLKSETUP		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3430_PRM_POLCTRL		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3430_PRM_VOLTSETUP2		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3430_PRM_VP1_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3430_PRM_VP1_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3430_PRM_VP1_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3430_PRM_VP1_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3430_PRM_VP1_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3430_PRM_VP1_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3430_PRM_VP2_CONFIG		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3430_PRM_VP2_VSTEPMIN	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3430_PRM_VP2_VSTEPMAX	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3430_PRM_VP2_VLIMITTO	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3430_PRM_VP2_VOLTAGE	OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3430_PRM_VP2_STATUS		OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3430_PRM_CLKSEL		OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3430_PRM_CLKOUT_CTRL	OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+
+/*
+ * Module specific PRM registers from PRM_BASE + domain offset
+ *
+ * Use prm_{read,write}_mod_reg() with these registers.
+ *
+ * With a few exceptions, these are the register names beginning with
+ * {PM,RM}_* on both architectures.  (The exceptions are the IRQSTATUS
+ * and IRQENABLE bits.)
+ *
+ */
+
+/* Registers appearing on both 24xx and 34xx */
+
+#define RM_RSTCTRL					0x0050
+#define RM_RSTTIME					0x0054
+#define RM_RSTST					0x0058
+
+#define PM_WKEN						0x00a0
+#define PM_WKEN1					PM_WKEN
+#define PM_WKST						0x00b0
+#define PM_WKST1					PM_WKST
+#define PM_WKDEP					0x00c8
+#define PM_EVGENCTRL					0x00d4
+#define PM_EVGENONTIM					0x00d8
+#define PM_EVGENOFFTIM					0x00dc
+#define PM_PWSTCTRL					0x00e0
+#define PM_PWSTST					0x00e4
+
+#define OMAP3430_PM_MPUGRPSEL				0x00a4
+#define OMAP3430_PM_MPUGRPSEL1				OMAP3430_PM_MPUGRPSEL
+
+#define OMAP3430_PM_IVAGRPSEL				0x00a8
+#define OMAP3430_PM_IVAGRPSEL1				OMAP3430_PM_IVAGRPSEL
+
+#define OMAP3430_PM_PREPWSTST				0x00e8
+
+#define OMAP3430_PRM_IRQSTATUS_IVA2			0x00f8
+#define OMAP3430_PRM_IRQENABLE_IVA2			0x00fc
+
+
+/* Architecture-specific registers */
+
+#define OMAP24XX_PM_WKEN2				0x00a4
+#define OMAP24XX_PM_WKST2				0x00b4
+
+#define OMAP24XX_PRCM_IRQSTATUS_DSP			0x00f0	/* IVA mod */
+#define OMAP24XX_PRCM_IRQENABLE_DSP			0x00f4	/* IVA mod */
+#define OMAP24XX_PRCM_IRQSTATUS_IVA			0x00f8
+#define OMAP24XX_PRCM_IRQENABLE_IVA			0x00fc
+
+#ifndef __ASSEMBLER__
+
+/* Power/reset management domain register get/set */
+
+static inline void prm_write_mod_reg(u32 val, s16 module, s16 idx)
+{
+	__raw_writel(val, OMAP_PRM_REGADDR(module, idx));
+}
+
+static inline u32 prm_read_mod_reg(s16 module, s16 idx)
+{
+	return __raw_readl(OMAP_PRM_REGADDR(module, idx));
+}
+
+#endif
+
+/*
+ * Bits common to specific registers
+ *
+ * The 3430 register and bit names are generally used,
+ * since they tend to make more sense
+ */
+
+/* PM_EVGENONTIM_MPU */
+/* Named PM_EVEGENONTIM_MPU on the 24XX */
+#define OMAP_ONTIMEVAL_SHIFT				0
+#define OMAP_ONTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PM_EVGENOFFTIM_MPU */
+/* Named PM_EVEGENOFFTIM_MPU on the 24XX */
+#define OMAP_OFFTIMEVAL_SHIFT				0
+#define OMAP_OFFTIMEVAL_MASK				(0xffffffff << 0)
+
+/* PRM_CLKSETUP and PRCM_VOLTSETUP */
+/* Named PRCM_CLKSSETUP on the 24XX */
+#define OMAP_SETUP_TIME_SHIFT				0
+#define OMAP_SETUP_TIME_MASK				(0xffff << 0)
+
+/* PRM_CLKSRC_CTRL */
+/* Named PRCM_CLKSRC_CTRL on the 24XX */
+#define OMAP_SYSCLKDIV_SHIFT				6
+#define OMAP_SYSCLKDIV_MASK				(0x3 << 6)
+#define OMAP_AUTOEXTCLKMODE_SHIFT			3
+#define OMAP_AUTOEXTCLKMODE_MASK			(0x3 << 3)
+#define OMAP_SYSCLKSEL_SHIFT				0
+#define OMAP_SYSCLKSEL_MASK				(0x3 << 0)
+
+/* PM_EVGENCTRL_MPU */
+#define OMAP_OFFLOADMODE_SHIFT				3
+#define OMAP_OFFLOADMODE_MASK				(0x3 << 3)
+#define OMAP_ONLOADMODE_SHIFT				1
+#define OMAP_ONLOADMODE_MASK				(0x3 << 1)
+#define OMAP_ENABLE					(1 << 0)
+
+/* PRM_RSTTIME */
+/* Named RM_RSTTIME_WKUP on the 24xx */
+#define OMAP_RSTTIME2_SHIFT				8
+#define OMAP_RSTTIME2_MASK				(0x1f << 8)
+#define OMAP_RSTTIME1_SHIFT				0
+#define OMAP_RSTTIME1_MASK				(0xff << 0)
+
+
+/* PRM_RSTCTRL */
+/* Named RM_RSTCTRL_WKUP on the 24xx */
+/* 2420 calls RST_DPLL3 'RST_DPLL' */
+#define OMAP_RST_DPLL3					(1 << 2)
+#define OMAP_RST_GS					(1 << 1)
+
+
+/*
+ * Bits common to module-shared registers
+ *
+ * Not all registers of a particular type support all of these bits -
+ * check TRM if you are unsure
+ */
+
+/*
+ * 24XX: PM_PWSTST_CORE, PM_PWSTST_GFX, PM_PWSTST_MPU, PM_PWSTST_DSP
+ *
+ * 2430: PM_PWSTST_MDM
+ *
+ * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
+ *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
+ *	 PM_PWSTST_NEON
+ */
+#define OMAP_INTRANSITION				(1 << 20)
+
+
+/*
+ * 24XX: PM_PWSTST_GFX, PM_PWSTST_DSP
+ *
+ * 2430: PM_PWSTST_MDM
+ *
+ * 3430: PM_PWSTST_IVA2, PM_PWSTST_MPU, PM_PWSTST_CORE, PM_PWSTST_GFX,
+ *	 PM_PWSTST_DSS, PM_PWSTST_CAM, PM_PWSTST_PER, PM_PWSTST_EMU,
+ *	 PM_PWSTST_NEON
+ */
+#define OMAP_POWERSTATEST_SHIFT				0
+#define OMAP_POWERSTATEST_MASK				(0x3 << 0)
+
+/*
+ * 24XX: RM_RSTST_MPU and RM_RSTST_DSP - on 24XX, 'COREDOMAINWKUP_RST' is
+ *	 called 'COREWKUP_RST'
+ *
+ * 3430: RM_RSTST_IVA2, RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSS,
+ *	 RM_RSTST_CAM, RM_RSTST_PER, RM_RSTST_NEON
+ */
+#define OMAP_COREDOMAINWKUP_RST				(1 << 3)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_GFX, RM_RSTST_DSP
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_DOMAINWKUP_RST				(1 << 2)
+
+/*
+ * 24XX: RM_RSTST_MPU, RM_RSTST_WKUP, RM_RSTST_DSP
+ *	 On 24XX, 'GLOBALWARM_RST' is called 'GLOBALWMPU_RST'.
+ *
+ * 2430: RM_RSTST_MDM
+ *
+ * 3430: RM_RSTST_CORE, RM_RSTST_EMU
+ */
+#define OMAP_GLOBALWARM_RST				(1 << 1)
+#define OMAP_GLOBALCOLD_RST				(1 << 0)
+
+/*
+ * 24XX: PM_WKDEP_GFX, PM_WKDEP_MPU, PM_WKDEP_CORE, PM_WKDEP_DSP
+ *	 2420 TRM sometimes uses "EN_WAKEUP" instead of "EN_WKUP"
+ *
+ * 2430: PM_WKDEP_MDM
+ *
+ * 3430: PM_WKDEP_IVA2, PM_WKDEP_GFX, PM_WKDEP_DSS, PM_WKDEP_CAM,
+ *	 PM_WKDEP_PER
+ */
+#define OMAP_EN_WKUP					(1 << 4)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSP
+ *
+ * 2430: PM_PWSTCTRL_MDM
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *	 PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON
+ */
+#define OMAP_LOGICRETSTATE				(1 << 2)
+
+/*
+ * 24XX: PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE, PM_PWSTCTRL_GFX,
+ *       PM_PWSTCTRL_DSP, PM_PWSTST_MPU
+ *
+ * 2430: PM_PWSTCTRL_MDM shared bits
+ *
+ * 3430: PM_PWSTCTRL_IVA2, PM_PWSTCTRL_MPU, PM_PWSTCTRL_CORE,
+ *	 PM_PWSTCTRL_GFX, PM_PWSTCTRL_DSS, PM_PWSTCTRL_CAM, PM_PWSTCTRL_PER,
+ *	 PM_PWSTCTRL_NEON shared bits
+ */
+#define OMAP_POWERSTATE_SHIFT				0
+#define OMAP_POWERSTATE_MASK				(0x3 << 0)
+
+
+#endif
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
new file mode 100644
index 000000000000..d7f23bc9550a
--- /dev/null
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -0,0 +1,58 @@
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRC_H
+#define __ARCH_ARM_MACH_OMAP2_SDRC_H
+
+/*
+ * OMAP2 SDRC register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <asm/arch/sdrc.h>
+
+#ifndef __ASSEMBLER__
+extern unsigned long omap2_sdrc_base;
+extern unsigned long omap2_sms_base;
+
+#define OMAP_SDRC_REGADDR(reg)						\
+		(void __iomem *)IO_ADDRESS(omap2_sdrc_base + (reg))
+#define OMAP_SMS_REGADDR(reg)						\
+		(void __iomem *)IO_ADDRESS(omap2_sms_base + (reg))
+
+/* SDRC global register get/set */
+
+static inline void sdrc_write_reg(u32 val, u16 reg)
+{
+	__raw_writel(val, OMAP_SDRC_REGADDR(reg));
+}
+
+static inline u32 sdrc_read_reg(u16 reg)
+{
+	return __raw_readl(OMAP_SDRC_REGADDR(reg));
+}
+
+/* SMS global register get/set */
+
+static inline void sms_write_reg(u32 val, u16 reg)
+{
+	__raw_writel(val, OMAP_SMS_REGADDR(reg));
+}
+
+static inline u32 sms_read_reg(u16 reg)
+{
+	return __raw_readl(OMAP_SMS_REGADDR(reg));
+}
+#else
+#define OMAP242X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)	IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#endif	/* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 16247d557853..46ccb9b8b583 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -26,19 +26,10 @@
 #include <asm/arch/io.h>
 #include <asm/arch/pm.h>
 
-#define A_32KSYNC_CR_V		IO_ADDRESS(OMAP_TIMER32K_BASE+0x10)
-#define A_PRCM_VOLTCTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x50)
-#define A_PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x80)
-#define A_CM_CLKEN_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x500)
-#define A_CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x520)
-#define A_CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x540)
-#define A_CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE+0x544)
+#include "sdrc.h"
 
-#define A_SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE+0x60)
-#define	A_SDRC_POWER_V		IO_ADDRESS(OMAP24XX_SDRC_BASE+0x70)
-#define A_SDRC_RFR_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA4)
+/* First address of reserved address space?  apparently valid for OMAP2 & 3 */
 #define A_SDRC0_V		(0xC0000000)
-#define A_SDRC_MANUAL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE+0xA8)
 
 	.text
 
@@ -126,17 +117,11 @@ loop2:
 	ldmfd	sp!, {r0 - r12, pc}	@ restore regs and return
 
 A_SDRC_POWER:
-	.word A_SDRC_POWER_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_POWER)
 A_SDRC0:
 	.word A_SDRC0_V
-A_CM_CLKSEL2_PLL_S:
-	.word A_CM_CLKSEL2_PLL_V
-A_CM_CLKEN_PLL:
-	.word A_CM_CLKEN_PLL_V
 A_SDRC_DLLA_CTRL_S:
-	.word A_SDRC_DLLA_CTRL_V
-A_SDRC_MANUAL_S:
-	.word A_SDRC_MANUAL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(omap24xx_cpu_suspend_sz)
 	.word	. - omap24xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram-fn.S b/arch/arm/mach-omap2/sram-fn.S
index b27576690f8d..4a9e49140716 100644
--- a/arch/arm/mach-omap2/sram-fn.S
+++ b/arch/arm/mach-omap2/sram-fn.S
@@ -27,19 +27,11 @@
 #include <asm/arch/io.h>
 #include <asm/hardware.h>
 
-#include "prcm-regs.h"
+#include "sdrc.h"
+#include "prm.h"
+#include "cm.h"
 
-#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP24XX_32KSYNCT_BASE + 0x010)
-
-#define CM_CLKSEL2_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x544)
-#define PRCM_VOLTCTRL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x050)
-#define PRCM_CLKCFG_CTRL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x080)
-#define CM_CLKEN_PLL_V		IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x500)
-#define CM_IDLEST_CKGEN_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x520)
-#define CM_CLKSEL1_PLL_V	IO_ADDRESS(OMAP24XX_PRCM_BASE + 0x540)
-
-#define SDRC_DLLA_CTRL_V	IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x060)
-#define SDRC_RFR_CTRL_V		IO_ADDRESS(OMAP24XX_SDRC_BASE + 0x0a4)
+#define TIMER_32KSYNCT_CR_V	IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 	.text
 
@@ -131,11 +123,11 @@ volt_delay:
 
 /* relative load constants */
 cm_clksel2_pll:
-	.word CM_CLKSEL2_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 sdrc_dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 prcm_voltctrl:
-	.word PRCM_VOLTCTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
 prcm_mask_val:
 	.word 0xFFFF3FFC
 timer_32ksynct_cr:
@@ -225,13 +217,13 @@ volt_delay_c:
 	mov	pc, lr			@ back to caller
 
 ddr_cm_clksel2_pll:
-	.word CM_CLKSEL2_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL2)
 ddr_sdrc_dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 ddr_sdrc_rfr_ctrl:
-	.word SDRC_RFR_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 ddr_prcm_voltctrl:
-	.word PRCM_VOLTCTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x50)
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 ddr_timer_32ksynct:
@@ -316,17 +308,17 @@ wait_dll_lock:
 	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
 
 set_config:
-	.word PRCM_CLKCFG_CTRL_V
+	.word OMAP2420_PRM_REGADDR(OCP_MOD, 0x80)
 pll_ctl:
-	.word CM_CLKEN_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_FCLKEN1)
 pll_stat:
-	.word CM_IDLEST_CKGEN_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_IDLEST1)
 pll_div:
-	.word CM_CLKSEL1_PLL_V
+	.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKSEL)
 sdrc_rfr:
-	.word SDRC_RFR_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
 dlla_ctrl:
-	.word SDRC_DLLA_CTRL_V
+	.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 ENTRY(sram_set_prcm_sz)
 	.word	. - sram_set_prcm
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 3234deedb946..78d05f203fff 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,11 @@
  *
  * OMAP2 GP timer support.
  *
+ * Update to use new clocksource/clockevent layers
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * Original driver:
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *         Juha Yrjölä <juha.yrjola@nokia.com>
@@ -25,24 +30,23 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/arch/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
-
-static inline void omap2_gp_timer_start(unsigned long load_val)
-{
-	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
-	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	omap_dm_timer_start(gptimer);
-}
+static struct clock_event_device clockevent_gpt;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
-	omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
-	timer_tick();
+	struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
+	struct clock_event_device *evt = &clockevent_gpt;
+
+	omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
 
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -52,20 +56,138 @@ static struct irqaction omap2_gp_timer_irq = {
 	.handler	= omap2_gp_timer_interrupt,
 };
 
-static void __init omap2_gp_timer_init(void)
+static int omap2_gp_timer_set_next_event(unsigned long cycles,
+					 struct clock_event_device *evt)
 {
-	u32 tick_period;
+	omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
+	omap_dm_timer_start(gptimer);
+
+	return 0;
+}
+
+static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *evt)
+{
+	u32 period;
+
+	omap_dm_timer_stop(gptimer);
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
+		period -= 1;
+
+		omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
+		omap_dm_timer_start(gptimer);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_RESUME:
+		break;
+	}
+}
+
+static struct clock_event_device clockevent_gpt = {
+	.name		= "gp timer",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.set_next_event	= omap2_gp_timer_set_next_event,
+	.set_mode	= omap2_gp_timer_set_mode,
+};
+
+static void __init omap2_gp_clockevent_init(void)
+{
+	u32 tick_rate;
 
-	omap_dm_timer_init();
 	gptimer = omap_dm_timer_request_specific(1);
 	BUG_ON(gptimer == NULL);
 
+#if defined(CONFIG_OMAP_32K_TIMER)
+	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+#else
 	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
-	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
-	tick_period -= 1;
+#endif
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
 
+	omap2_gp_timer_irq.dev_id = (void *)gptimer;
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
-	omap2_gp_timer_start(tick_period);
+	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+
+	clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
+				     clockevent_gpt.shift);
+	clockevent_gpt.max_delta_ns =
+		clockevent_delta2ns(0xffffffff, &clockevent_gpt);
+	clockevent_gpt.min_delta_ns =
+		clockevent_delta2ns(1, &clockevent_gpt);
+
+	clockevent_gpt.cpumask = cpumask_of_cpu(0);
+	clockevents_register_device(&clockevent_gpt);
+}
+
+#ifdef CONFIG_OMAP_32K_TIMER
+/* 
+ * When 32k-timer is enabled, don't use GPTimer for clocksource
+ * instead, just leave default clocksource which uses the 32k
+ * sync counter.  See clocksource setup in see plat-omap/common.c. 
+ */
+
+static inline void __init omap2_gp_clocksource_init(void) {}
+#else
+/*
+ * clocksource
+ */
+static struct omap_dm_timer *gpt_clocksource;
+static cycle_t clocksource_read_cycles(void)
+{
+	return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
+}
+
+static struct clocksource clocksource_gpt = {
+	.name		= "gp timer",
+	.rating		= 300,
+	.read		= clocksource_read_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 24,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/* Setup free-running counter for clocksource */
+static void __init omap2_gp_clocksource_init(void)
+{
+	static struct omap_dm_timer *gpt;
+	u32 tick_rate, tick_period;
+	static char err1[] __initdata = KERN_ERR
+		"%s: failed to request dm-timer\n";
+	static char err2[] __initdata = KERN_ERR
+		"%s: can't register clocksource!\n";
+
+	gpt = omap_dm_timer_request();
+	if (!gpt)
+		printk(err1, clocksource_gpt.name);
+	gpt_clocksource = gpt;
+
+	omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
+	tick_period = (tick_rate / HZ) - 1;
+
+	omap_dm_timer_set_load(gpt, 1, 0);
+	omap_dm_timer_start(gpt);
+
+	clocksource_gpt.mult =
+		clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
+	if (clocksource_register(&clocksource_gpt))
+		printk(err2, clocksource_gpt.name);
+}
+#endif
+
+static void __init omap2_gp_timer_init(void)
+{
+	omap_dm_timer_init();
+
+	omap2_gp_clockevent_init();
+	omap2_gp_clocksource_init();
 }
 
 struct sys_timer omap_timer = {
diff --git a/arch/arm/mach-orion/addr-map.c b/arch/arm/mach-orion/addr-map.c
deleted file mode 100644
index 2e2fd63643c3..000000000000
--- a/arch/arm/mach-orion/addr-map.c
+++ /dev/null
@@ -1,484 +0,0 @@
-/*
- * arch/arm/mach-orion/addr-map.c
- *
- * Address map functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/hardware.h>
-#include "common.h"
-
-/*
- * The Orion has fully programable address map. There's a separate address
- * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
- * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
- * address decode windows that allow it to access any of the Orion resources.
- *
- * CPU address decoding --
- * Linux assumes that it is the boot loader that already setup the access to
- * DDR and internal registers.
- * Setup access to PCI and PCI-E IO/MEM space is issued by core.c.
- * Setup access to various devices located on the device bus interface (e.g.
- * flashes, RTC, etc) should be issued by machine-setup.c according to
- * specific board population (by using orion_setup_cpu_win()).
- *
- * Non-CPU Masters address decoding --
- * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
- * banks only (the typical use case).
- * Setup access for each master to DDR is issued by common.c.
- *
- * Note: although orion_setbits() and orion_clrbits() are not atomic
- * no locking is necessary here since code in this file is only called
- * at boot time when there is no concurrency issues.
- */
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR		0
-#define TARGET_PCI		3
-#define TARGET_PCIE		4
-#define TARGET_DEV_BUS		1
-#define ATTR_DDR_CS(n)		(((n) ==0) ? 0xe :	\
-				((n) == 1) ? 0xd :	\
-				((n) == 2) ? 0xb :	\
-				((n) == 3) ? 0x7 : 0xf)
-#define ATTR_PCIE_MEM		0x59
-#define ATTR_PCIE_IO		0x51
-#define ATTR_PCI_MEM		0x59
-#define ATTR_PCI_IO		0x51
-#define ATTR_DEV_CS0		0x1e
-#define ATTR_DEV_CS1		0x1d
-#define ATTR_DEV_CS2		0x1b
-#define ATTR_DEV_BOOT		0xf
-#define WIN_EN			1
-
-/*
- * Helpers to get DDR banks info
- */
-#define DDR_BASE_CS(n)		ORION_DDR_REG(0x1500 + ((n) * 8))
-#define DDR_SIZE_CS(n)		ORION_DDR_REG(0x1504 + ((n) * 8))
-#define DDR_MAX_CS		4
-#define DDR_REG_TO_SIZE(reg)	(((reg) | 0xffffff) + 1)
-#define DDR_REG_TO_BASE(reg)	((reg) & 0xff000000)
-#define DDR_BANK_EN		1
-
-/*
- * CPU Address Decode Windows registers
- */
-#define CPU_WIN_CTRL(n)		ORION_BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n)		ORION_BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n)	ORION_BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n)	ORION_BRIDGE_REG(0x00c | ((n) << 4))
-#define CPU_MAX_WIN		8
-
-/*
- * Use this CPU address decode windows allocation
- */
-#define CPU_WIN_PCIE_IO		0
-#define CPU_WIN_PCI_IO		1
-#define CPU_WIN_PCIE_MEM	2
-#define CPU_WIN_PCI_MEM		3
-#define CPU_WIN_DEV_BOOT	4
-#define CPU_WIN_DEV_CS0		5
-#define CPU_WIN_DEV_CS1		6
-#define CPU_WIN_DEV_CS2		7
-
-/*
- * PCIE Address Decode Windows registers
- */
-#define PCIE_BAR_CTRL(n)	ORION_PCIE_REG(0x1804 + ((n - 1) * 4))
-#define PCIE_BAR_LO(n)		ORION_PCIE_REG(0x0010 + ((n) * 8))
-#define PCIE_BAR_HI(n)		ORION_PCIE_REG(0x0014 + ((n) * 8))
-#define PCIE_WIN_CTRL(n)	ORION_PCIE_REG(0x1820 + ((n) << 4))
-#define PCIE_WIN_BASE(n)	ORION_PCIE_REG(0x1824 + ((n) << 4))
-#define PCIE_WIN_REMAP(n)	ORION_PCIE_REG(0x182c + ((n) << 4))
-#define PCIE_DEFWIN_CTRL	ORION_PCIE_REG(0x18b0)
-#define PCIE_EXPROM_WIN_CTRL	ORION_PCIE_REG(0x18c0)
-#define PCIE_EXPROM_WIN_REMP	ORION_PCIE_REG(0x18c4)
-#define PCIE_MAX_BARS		3
-#define PCIE_MAX_WINS		5
-
-/*
- * Use PCIE BAR '1' for all DDR banks
- */
-#define PCIE_DRAM_BAR		1
-
-/*
- * PCI Address Decode Windows registers
- */
-#define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION_PCI_REG(0xc08) : \
-				((n) == 1) ? ORION_PCI_REG(0xd08) :  \
-				((n) == 2) ? ORION_PCI_REG(0xc0c) :  \
-				((n) == 3) ? ORION_PCI_REG(0xd0c) : 0)
-#define PCI_BAR_REMAP_DDR_CS(n)	(((n) ==0) ? ORION_PCI_REG(0xc48) : \
-				((n) == 1) ? ORION_PCI_REG(0xd48) :  \
-				((n) == 2) ? ORION_PCI_REG(0xc4c) :  \
-				((n) == 3) ? ORION_PCI_REG(0xd4c) : 0)
-#define PCI_BAR_ENABLE		ORION_PCI_REG(0xc3c)
-#define PCI_CTRL_BASE_LO(n)	ORION_PCI_REG(0x1e00 | ((n) << 4))
-#define PCI_CTRL_BASE_HI(n)	ORION_PCI_REG(0x1e04 | ((n) << 4))
-#define PCI_CTRL_SIZE(n)	ORION_PCI_REG(0x1e08 | ((n) << 4))
-#define PCI_ADDR_DECODE_CTRL	ORION_PCI_REG(0xd3c)
-
-/*
- * PCI configuration heleprs for BAR settings
- */
-#define PCI_CONF_FUNC_BAR_CS(n)		((n) >> 1)
-#define PCI_CONF_REG_BAR_LO_CS(n)	(((n) & 1) ? 0x18 : 0x10)
-#define PCI_CONF_REG_BAR_HI_CS(n)	(((n) & 1) ? 0x1c : 0x14)
-
-/*
- * Gigabit Ethernet Address Decode Windows registers
- */
-#define ETH_WIN_BASE(win)	ORION_ETH_REG(0x200 + ((win) * 8))
-#define ETH_WIN_SIZE(win)	ORION_ETH_REG(0x204 + ((win) * 8))
-#define ETH_WIN_REMAP(win)	ORION_ETH_REG(0x280 + ((win) * 4))
-#define ETH_WIN_EN		ORION_ETH_REG(0x290)
-#define ETH_WIN_PROT		ORION_ETH_REG(0x294)
-#define ETH_MAX_WIN		6
-#define ETH_MAX_REMAP_WIN	4
-
-/*
- * USB Address Decode Windows registers
- */
-#define USB_WIN_CTRL(i, w)	((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
-					: ORION_USB1_REG(0x320 + ((w) << 4)))
-#define USB_WIN_BASE(i, w)	((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
-					: ORION_USB1_REG(0x324 + ((w) << 4)))
-#define USB_MAX_WIN		4
-
-/*
- * SATA Address Decode Windows registers
- */
-#define SATA_WIN_CTRL(win)	ORION_SATA_REG(0x30 + ((win) * 0x10))
-#define SATA_WIN_BASE(win)	ORION_SATA_REG(0x34 + ((win) * 0x10))
-#define SATA_MAX_WIN		4
-
-static int __init orion_cpu_win_can_remap(u32 win)
-{
-	u32 dev, rev;
-
-	orion_pcie_id(&dev, &rev);
-	if ((dev == MV88F5281_DEV_ID && win < 4)
-	    || (dev == MV88F5182_DEV_ID && win < 2)
-	    || (dev == MV88F5181_DEV_ID && win < 2))
-		return 1;
-
-	return 0;
-}
-
-void __init orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap)
-{
-	u32 win, attr, ctrl;
-
-	switch (target) {
-	case ORION_PCIE_IO:
-		target = TARGET_PCIE;
-		attr = ATTR_PCIE_IO;
-		win = CPU_WIN_PCIE_IO;
-		break;
-	case ORION_PCI_IO:
-		target = TARGET_PCI;
-		attr = ATTR_PCI_IO;
-		win = CPU_WIN_PCI_IO;
-		break;
-	case ORION_PCIE_MEM:
-		target = TARGET_PCIE;
-		attr = ATTR_PCIE_MEM;
-		win = CPU_WIN_PCIE_MEM;
-		break;
-	case ORION_PCI_MEM:
-		target = TARGET_PCI;
-		attr = ATTR_PCI_MEM;
-		win = CPU_WIN_PCI_MEM;
-		break;
-	case ORION_DEV_BOOT:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_BOOT;
-		win = CPU_WIN_DEV_BOOT;
-		break;
-	case ORION_DEV0:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_CS0;
-		win = CPU_WIN_DEV_CS0;
-		break;
-	case ORION_DEV1:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_CS1;
-		win = CPU_WIN_DEV_CS1;
-		break;
-	case ORION_DEV2:
-		target = TARGET_DEV_BUS;
-		attr = ATTR_DEV_CS2;
-		win = CPU_WIN_DEV_CS2;
-		break;
-	case ORION_DDR:
-	case ORION_REGS:
-		/*
-		 * Must be mapped by bootloader.
-		 */
-	default:
-		target = attr = win = -1;
-		BUG();
-	}
-
-	base &= 0xffff0000;
-	ctrl = (((size - 1) & 0xffff0000) | (attr << 8) |
-		(target << 4) | WIN_EN);
-
-	orion_write(CPU_WIN_BASE(win), base);
-	orion_write(CPU_WIN_CTRL(win), ctrl);
-
-	if (orion_cpu_win_can_remap(win)) {
-		if (remap >= 0) {
-			orion_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
-			orion_write(CPU_WIN_REMAP_HI(win), 0);
-		} else {
-			orion_write(CPU_WIN_REMAP_LO(win), base);
-			orion_write(CPU_WIN_REMAP_HI(win), 0);
-		}
-	}
-}
-
-void __init orion_setup_cpu_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < CPU_MAX_WIN; i++) {
-		orion_write(CPU_WIN_BASE(i), 0);
-		orion_write(CPU_WIN_CTRL(i), 0);
-		if (orion_cpu_win_can_remap(i)) {
-			orion_write(CPU_WIN_REMAP_LO(i), 0);
-			orion_write(CPU_WIN_REMAP_HI(i), 0);
-		}
-	}
-
-	/*
-	 * Setup windows for PCI+PCIe IO+MEM space.
-	 */
-	orion_setup_cpu_win(ORION_PCIE_IO, ORION_PCIE_IO_PHYS_BASE,
-				ORION_PCIE_IO_SIZE, ORION_PCIE_IO_BUS_BASE);
-	orion_setup_cpu_win(ORION_PCI_IO, ORION_PCI_IO_PHYS_BASE,
-				ORION_PCI_IO_SIZE, ORION_PCI_IO_BUS_BASE);
-	orion_setup_cpu_win(ORION_PCIE_MEM, ORION_PCIE_MEM_PHYS_BASE,
-				ORION_PCIE_MEM_SIZE, -1);
-	orion_setup_cpu_win(ORION_PCI_MEM, ORION_PCI_MEM_PHYS_BASE,
-				ORION_PCI_MEM_SIZE, -1);
-}
-
-/*
- * Setup PCIE BARs and Address Decode Wins:
- * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
- * WIN[0-3] -> DRAM bank[0-3]
- */
-void __init orion_setup_pcie_wins(void)
-{
-	u32 base, size, i;
-
-	/*
-	 * First, disable and clear BARs and windows
-	 */
-	for (i = 1; i < PCIE_MAX_BARS; i++) {
-		orion_write(PCIE_BAR_CTRL(i), 0);
-		orion_write(PCIE_BAR_LO(i), 0);
-		orion_write(PCIE_BAR_HI(i), 0);
-	}
-
-	for (i = 0; i < PCIE_MAX_WINS; i++) {
-		orion_write(PCIE_WIN_CTRL(i), 0);
-		orion_write(PCIE_WIN_BASE(i), 0);
-		orion_write(PCIE_WIN_REMAP(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks. Count total DDR size on the fly.
-	 */
-	base = DDR_REG_TO_BASE(orion_read(DDR_BASE_CS(0)));
-	size = 0;
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 bank_base, bank_size;
-		bank_size = orion_read(DDR_SIZE_CS(i));
-		bank_base = orion_read(DDR_BASE_CS(i));
-		if (bank_size & DDR_BANK_EN) {
-			bank_size = DDR_REG_TO_SIZE(bank_size);
-			bank_base = DDR_REG_TO_BASE(bank_base);
-			orion_write(PCIE_WIN_BASE(i), bank_base & 0xffff0000);
-			orion_write(PCIE_WIN_REMAP(i), 0);
-			orion_write(PCIE_WIN_CTRL(i),
-					((bank_size-1) & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					(TARGET_DDR << 4) |
-					(PCIE_DRAM_BAR << 1) | WIN_EN);
-			size += bank_size;
-		}
-	}
-
-	/*
-	 * Setup BAR[1] to all DRAM banks
-	 */
-	orion_write(PCIE_BAR_LO(PCIE_DRAM_BAR), base & 0xffff0000);
-	orion_write(PCIE_BAR_HI(PCIE_DRAM_BAR), 0);
-	orion_write(PCIE_BAR_CTRL(PCIE_DRAM_BAR),
-				((size - 1) & 0xffff0000) | WIN_EN);
-}
-
-void __init orion_setup_pci_wins(void)
-{
-	u32 base, size, i;
-
-	/*
-	 * First, disable windows
-	 */
-	orion_write(PCI_BAR_ENABLE, 0xffffffff);
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		base = orion_read(DDR_BASE_CS(i));
-		size = orion_read(DDR_SIZE_CS(i));
-		if (size & DDR_BANK_EN) {
-			u32 bus, dev, func, reg, val;
-			size = DDR_REG_TO_SIZE(size);
-			base = DDR_REG_TO_BASE(base);
-			bus = orion_pci_local_bus_nr();
-			dev = orion_pci_local_dev_nr();
-			func = PCI_CONF_FUNC_BAR_CS(i);
-			reg = PCI_CONF_REG_BAR_LO_CS(i);
-			orion_pci_hw_rd_conf(bus, dev, func, reg, 4, &val);
-			orion_pci_hw_wr_conf(bus, dev, func, reg, 4,
-					(base & 0xfffff000) | (val & 0xfff));
-			reg = PCI_CONF_REG_BAR_HI_CS(i);
-			orion_pci_hw_wr_conf(bus, dev, func, reg, 4, 0);
-			orion_write(PCI_BAR_SIZE_DDR_CS(i),
-					(size - 1) & 0xfffff000);
-			orion_write(PCI_BAR_REMAP_DDR_CS(i),
-					base & 0xfffff000);
-			orion_clrbits(PCI_BAR_ENABLE, (1 << i));
-		}
-	}
-
-	/*
-	 * Disable automatic update of address remaping when writing to BARs
-	 */
-	orion_setbits(PCI_ADDR_DECODE_CTRL, 1);
-}
-
-void __init orion_setup_usb_wins(void)
-{
-	int i;
-	u32 usb_if, dev, rev;
-	u32 max_usb_if = 1;
-
-	orion_pcie_id(&dev, &rev);
-	if (dev == MV88F5182_DEV_ID)
-		max_usb_if = 2;
-
-	for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
-		/*
-		 * First, disable and clear windows
-		 */
-		for (i = 0; i < USB_MAX_WIN; i++) {
-			orion_write(USB_WIN_BASE(usb_if, i), 0);
-			orion_write(USB_WIN_CTRL(usb_if, i), 0);
-		}
-
-		/*
-		 * Setup windows for DDR banks.
-		 */
-		for (i = 0; i < DDR_MAX_CS; i++) {
-			u32 base, size;
-			size = orion_read(DDR_SIZE_CS(i));
-			base = orion_read(DDR_BASE_CS(i));
-			if (size & DDR_BANK_EN) {
-				base = DDR_REG_TO_BASE(base);
-				size = DDR_REG_TO_SIZE(size);
-				orion_write(USB_WIN_CTRL(usb_if, i),
-						((size-1) & 0xffff0000) |
-						(ATTR_DDR_CS(i) << 8) |
-						(TARGET_DDR << 4) | WIN_EN);
-				orion_write(USB_WIN_BASE(usb_if, i),
-						base & 0xffff0000);
-			}
-		}
-	}
-}
-
-void __init orion_setup_eth_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < ETH_MAX_WIN; i++) {
-		orion_write(ETH_WIN_BASE(i), 0);
-		orion_write(ETH_WIN_SIZE(i), 0);
-		orion_setbits(ETH_WIN_EN, 1 << i);
-		orion_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		if (i < ETH_MAX_REMAP_WIN)
-			orion_write(ETH_WIN_REMAP(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 base, size;
-		size = orion_read(DDR_SIZE_CS(i));
-		base = orion_read(DDR_BASE_CS(i));
-		if (size & DDR_BANK_EN) {
-			base = DDR_REG_TO_BASE(base);
-			size = DDR_REG_TO_SIZE(size);
-			orion_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
-			orion_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					TARGET_DDR);
-			orion_clrbits(ETH_WIN_EN, 1 << i);
-			orion_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
-		}
-	}
-}
-
-void __init orion_setup_sata_wins(void)
-{
-	int i;
-
-	/*
-	 * First, disable and clear windows
-	 */
-	for (i = 0; i < SATA_MAX_WIN; i++) {
-		orion_write(SATA_WIN_BASE(i), 0);
-		orion_write(SATA_WIN_CTRL(i), 0);
-	}
-
-	/*
-	 * Setup windows for DDR banks.
-	 */
-	for (i = 0; i < DDR_MAX_CS; i++) {
-		u32 base, size;
-		size = orion_read(DDR_SIZE_CS(i));
-		base = orion_read(DDR_BASE_CS(i));
-		if (size & DDR_BANK_EN) {
-			base = DDR_REG_TO_BASE(base);
-			size = DDR_REG_TO_SIZE(size);
-			orion_write(SATA_WIN_CTRL(i),
-					((size-1) & 0xffff0000) |
-					(ATTR_DDR_CS(i) << 8) |
-					(TARGET_DDR << 4) | WIN_EN);
-			orion_write(SATA_WIN_BASE(i),
-					base & 0xffff0000);
-		}
-	}
-}
diff --git a/arch/arm/mach-orion/common.c b/arch/arm/mach-orion/common.c
deleted file mode 100644
index 5f0ee4b8a9b7..000000000000
--- a/arch/arm/mach-orion/common.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * arch/arm/mach-orion/common.c
- *
- * Core functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/mv643xx_i2c.h>
-#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/mach/map.h>
-#include <asm/arch/hardware.h>
-#include "common.h"
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc orion_io_desc[] __initdata = {
-	{
-		.virtual	= ORION_REGS_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_REGS_PHYS_BASE),
-		.length		= ORION_REGS_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= ORION_PCIE_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_PCIE_IO_PHYS_BASE),
-		.length		= ORION_PCIE_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= ORION_PCI_IO_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_PCI_IO_PHYS_BASE),
-		.length		= ORION_PCI_IO_SIZE,
-		.type		= MT_DEVICE
-	},
-	{
-		.virtual	= ORION_PCIE_WA_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ORION_PCIE_WA_PHYS_BASE),
-		.length		= ORION_PCIE_WA_SIZE,
-		.type		= MT_DEVICE
-	},
-};
-
-void __init orion_map_io(void)
-{
-	iotable_init(orion_io_desc, ARRAY_SIZE(orion_io_desc));
-}
-
-/*****************************************************************************
- * UART
- ****************************************************************************/
-
-static struct resource orion_uart_resources[] = {
-	{
-		.start		= UART0_PHYS_BASE,
-		.end		= UART0_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_ORION_UART0,
-		.end		= IRQ_ORION_UART0,
-		.flags		= IORESOURCE_IRQ,
-	},
-	{
-		.start		= UART1_PHYS_BASE,
-		.end		= UART1_PHYS_BASE + 0xff,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= IRQ_ORION_UART1,
-		.end		= IRQ_ORION_UART1,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct plat_serial8250_port orion_uart_data[] = {
-	{
-		.mapbase	= UART0_PHYS_BASE,
-		.membase	= (char *)UART0_VIRT_BASE,
-		.irq		= IRQ_ORION_UART0,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION_TCLK,
-	},
-	{
-		.mapbase	= UART1_PHYS_BASE,
-		.membase	= (char *)UART1_VIRT_BASE,
-		.irq		= IRQ_ORION_UART1,
-		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= ORION_TCLK,
-	},
-	{ },
-};
-
-static struct platform_device orion_uart = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= orion_uart_data,
-	},
-	.resource		= orion_uart_resources,
-	.num_resources		= ARRAY_SIZE(orion_uart_resources),
-};
-
-/*******************************************************************************
- * USB Controller - 2 interfaces
- ******************************************************************************/
-
-static struct resource orion_ehci0_resources[] = {
-	{
-		.start	= ORION_USB0_PHYS_BASE,
-		.end	= ORION_USB0_PHYS_BASE + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_ORION_USB0_CTRL,
-		.end	= IRQ_ORION_USB0_CTRL,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct resource orion_ehci1_resources[] = {
-	{
-		.start	= ORION_USB1_PHYS_BASE,
-		.end	= ORION_USB1_PHYS_BASE + SZ_4K,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= IRQ_ORION_USB1_CTRL,
-		.end	= IRQ_ORION_USB1_CTRL,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 ehci_dmamask = 0xffffffffUL;
-
-static struct platform_device orion_ehci0 = {
-	.name		= "orion-ehci",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= orion_ehci0_resources,
-	.num_resources	= ARRAY_SIZE(orion_ehci0_resources),
-};
-
-static struct platform_device orion_ehci1 = {
-	.name		= "orion-ehci",
-	.id		= 1,
-	.dev		= {
-		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.resource	= orion_ehci1_resources,
-	.num_resources	= ARRAY_SIZE(orion_ehci1_resources),
-};
-
-/*****************************************************************************
- * Gigabit Ethernet port
- * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
- ****************************************************************************/
-
-static struct resource orion_eth_shared_resources[] = {
-	{
-		.start	= ORION_ETH_PHYS_BASE,
-		.end	= ORION_ETH_PHYS_BASE + 0xffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device orion_eth_shared = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= orion_eth_shared_resources,
-};
-
-static struct resource orion_eth_resources[] = {
-	{
-		.name	= "eth irq",
-		.start	= IRQ_ORION_ETH_SUM,
-		.end	= IRQ_ORION_ETH_SUM,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device orion_eth = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= orion_eth_resources,
-};
-
-void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data)
-{
-	orion_eth.dev.platform_data = eth_data;
-	platform_device_register(&orion_eth_shared);
-	platform_device_register(&orion_eth);
-}
-
-/*****************************************************************************
- * I2C controller
- * (The Orion and Discovery (MV643xx) families share the same I2C controller)
- ****************************************************************************/
-
-static struct mv64xxx_i2c_pdata orion_i2c_pdata = {
-	.freq_m		= 8, /* assumes 166 MHz TCLK */
-	.freq_n		= 3,
-	.timeout	= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource orion_i2c_resources[] = {
-	{
-		.name   = "i2c base",
-		.start  = I2C_PHYS_BASE,
-		.end    = I2C_PHYS_BASE + 0x20 -1,
-		.flags  = IORESOURCE_MEM,
-	},
-	{
-		.name   = "i2c irq",
-		.start  = IRQ_ORION_I2C,
-		.end    = IRQ_ORION_I2C,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device orion_i2c = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(orion_i2c_resources),
-	.resource	= orion_i2c_resources,
-	.dev		= {
-		.platform_data = &orion_i2c_pdata,
-	},
-};
-
-/*****************************************************************************
- * Sata port
- ****************************************************************************/
-static struct resource orion_sata_resources[] = {
-        {
-                .name   = "sata base",
-                .start  = ORION_SATA_PHYS_BASE,
-                .end    = ORION_SATA_PHYS_BASE + 0x5000 - 1,
-                .flags  = IORESOURCE_MEM,
-        },
-	{
-                .name   = "sata irq",
-                .start  = IRQ_ORION_SATA,
-                .end    = IRQ_ORION_SATA,
-                .flags  = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device orion_sata = {
-	.name           = "sata_mv",
-	.id             = 0,
-	.dev		= {
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(orion_sata_resources),
-	.resource       = orion_sata_resources,
-};
-
-void __init orion_sata_init(struct mv_sata_platform_data *sata_data)
-{
-	orion_sata.dev.platform_data = sata_data;
-	platform_device_register(&orion_sata);
-}
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-
-/*
- * Identify device ID and rev from PCIE configuration header space '0'.
- */
-static void orion_id(u32 *dev, u32 *rev, char **dev_name)
-{
-	orion_pcie_id(dev, rev);
-
-	if (*dev == MV88F5281_DEV_ID) {
-		if (*rev == MV88F5281_REV_D2) {
-			*dev_name = "MV88F5281-D2";
-		} else if (*rev == MV88F5281_REV_D1) {
-			*dev_name = "MV88F5281-D1";
-		} else {
-			*dev_name = "MV88F5281-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F5182_DEV_ID) {
-		if (*rev == MV88F5182_REV_A2) {
-			*dev_name = "MV88F5182-A2";
-		} else {
-			*dev_name = "MV88F5182-Rev-Unsupported";
-		}
-	} else if (*dev == MV88F5181_DEV_ID) {
-		if (*rev == MV88F5181_REV_B1) {
-			*dev_name = "MV88F5181-Rev-B1";
-		} else {
-			*dev_name = "MV88F5181-Rev-Unsupported";
-		}
-	} else {
-		*dev_name = "Device-Unknown";
-	}
-}
-
-void __init orion_init(void)
-{
-	char *dev_name;
-	u32 dev, rev;
-
-	orion_id(&dev, &rev, &dev_name);
-	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION_TCLK);
-
-	/*
-	 * Setup Orion address map
-	 */
-	orion_setup_cpu_wins();
-	orion_setup_usb_wins();
-	orion_setup_eth_wins();
-	orion_setup_pci_wins();
-	orion_setup_pcie_wins();
-	if (dev == MV88F5182_DEV_ID)
-		orion_setup_sata_wins();
-
-	/*
-	 * REgister devices
-	 */
-	platform_device_register(&orion_uart);
-	platform_device_register(&orion_ehci0);
-	if (dev == MV88F5182_DEV_ID)
-		platform_device_register(&orion_ehci1);
-	platform_device_register(&orion_i2c);
-}
diff --git a/arch/arm/mach-orion/common.h b/arch/arm/mach-orion/common.h
deleted file mode 100644
index 10154ec885df..000000000000
--- a/arch/arm/mach-orion/common.h
+++ /dev/null
@@ -1,86 +0,0 @@
-#ifndef __ARCH_ORION_COMMON_H__
-#define __ARCH_ORION_COMMON_H__
-
-/*
- * Basic Orion init functions used early by machine-setup.
- */
-
-void __init orion_map_io(void);
-void __init orion_init_irq(void);
-void __init orion_init(void);
-
-/*
- * Enumerations and functions for Orion windows mapping. Used by Orion core
- * functions to map its interfaces and by the machine-setup to map its on-
- * board devices. Details in /mach-orion/addr-map.c
- */
-
-enum orion_target {
-	ORION_DEV_BOOT = 0,
-	ORION_DEV0,
-	ORION_DEV1,
-	ORION_DEV2,
-	ORION_PCIE_MEM,
-	ORION_PCIE_IO,
-	ORION_PCI_MEM,
-	ORION_PCI_IO,
-	ORION_DDR,
-	ORION_REGS,
-	ORION_MAX_TARGETS
-};
-
-void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap);
-void orion_setup_cpu_wins(void);
-void orion_setup_eth_wins(void);
-void orion_setup_usb_wins(void);
-void orion_setup_pci_wins(void);
-void orion_setup_pcie_wins(void);
-void orion_setup_sata_wins(void);
-
-/*
- * Shared code used internally by other Orion core functions.
- * (/mach-orion/pci.c)
- */
-
-struct pci_sys_data;
-struct pci_bus;
-
-void orion_pcie_id(u32 *dev, u32 *rev);
-u32 orion_pcie_local_bus_nr(void);
-u32 orion_pci_local_bus_nr(void);
-u32 orion_pci_local_dev_nr(void);
-int orion_pci_sys_setup(int nr, struct pci_sys_data *sys);
-struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
-int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 *val);
-int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func, u32 where, u32 size, u32 val);
-
-/*
- * Valid GPIO pins according to MPP setup, used by machine-setup.
- * (/mach-orion/gpio.c).
- */
-
-void __init orion_gpio_set_valid_pins(u32 pins);
-void gpio_display(void);	/* debug */
-
-/*
- * Orion system timer (clocksource + clockevnt, /mach-orion/time.c)
- */
-extern struct sys_timer orion_timer;
-
-/*
- * Pull in Orion Ethernet platform_data, used by machine-setup
- */
-
-struct mv643xx_eth_platform_data;
-
-void __init orion_eth_init(struct mv643xx_eth_platform_data *eth_data);
-
-/*
- * Orion Sata platform_data, used by machine-setup
- */
-
-struct mv_sata_platform_data;
-
-void __init orion_sata_init(struct mv_sata_platform_data *sata_data);
-
-#endif /* __ARCH_ORION_COMMON_H__ */
diff --git a/arch/arm/mach-orion/pci.c b/arch/arm/mach-orion/pci.c
deleted file mode 100644
index b109bb46681e..000000000000
--- a/arch/arm/mach-orion/pci.c
+++ /dev/null
@@ -1,557 +0,0 @@
-/*
- * arch/arm/mach-orion/pci.c
- *
- * PCI and PCIE functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/mach/pci.h>
-#include "common.h"
-
-/*****************************************************************************
- * Orion has one PCIE controller and one PCI controller.
- *
- * Note1: The local PCIE bus number is '0'. The local PCI bus number
- * follows the scanned PCIE bridged busses, if any.
- *
- * Note2: It is possible for PCI/PCIE agents to access many subsystem's
- * space, by configuring BARs and Address Decode Windows, e.g. flashes on
- * device bus, Orion registers, etc. However this code only enable the
- * access to DDR banks.
- ****************************************************************************/
-
-
-/*****************************************************************************
- * PCIE controller
- ****************************************************************************/
-#define PCIE_CTRL		ORION_PCIE_REG(0x1a00)
-#define PCIE_STAT		ORION_PCIE_REG(0x1a04)
-#define PCIE_DEV_ID		ORION_PCIE_REG(0x0000)
-#define PCIE_CMD_STAT		ORION_PCIE_REG(0x0004)
-#define PCIE_DEV_REV		ORION_PCIE_REG(0x0008)
-#define PCIE_MASK		ORION_PCIE_REG(0x1910)
-#define PCIE_CONF_ADDR		ORION_PCIE_REG(0x18f8)
-#define PCIE_CONF_DATA		ORION_PCIE_REG(0x18fc)
-
-/*
- * PCIE_STAT bits
- */
-#define PCIE_STAT_LINK_DOWN		1
-#define PCIE_STAT_BUS_OFFS		8
-#define PCIE_STAT_BUS_MASK		(0xff << PCIE_STAT_BUS_OFFS)
-#define PCIE_STAT_DEV_OFFS		20
-#define PCIE_STAT_DEV_MASK		(0x1f << PCIE_STAT_DEV_OFFS)
-
-/*
- * PCIE_CONF_ADDR bits
- */
-#define PCIE_CONF_REG(r)		((((r) & 0xf00) << 24) | ((r) & 0xfc))
-#define PCIE_CONF_FUNC(f)		(((f) & 0x3) << 8)
-#define PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
-#define PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
-#define PCIE_CONF_ADDR_EN		(1 << 31)
-
-/*
- * PCIE config cycles are done by programming the PCIE_CONF_ADDR register
- * and then reading the PCIE_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-static DEFINE_SPINLOCK(orion_pcie_lock);
-
-void orion_pcie_id(u32 *dev, u32 *rev)
-{
-	*dev = orion_read(PCIE_DEV_ID) >> 16;
-	*rev = orion_read(PCIE_DEV_REV) & 0xff;
-}
-
-u32 orion_pcie_local_bus_nr(void)
-{
-	u32 stat = orion_read(PCIE_STAT);
-	return((stat & PCIE_STAT_BUS_MASK) >> PCIE_STAT_BUS_OFFS);
-}
-
-static u32 orion_pcie_local_dev_nr(void)
-{
-	u32 stat = orion_read(PCIE_STAT);
-	return((stat & PCIE_STAT_DEV_MASK) >> PCIE_STAT_DEV_OFFS);
-}
-
-static u32 orion_pcie_no_link(void)
-{
-	u32 stat = orion_read(PCIE_STAT);
-	return(stat & PCIE_STAT_LINK_DOWN);
-}
-
-static void orion_pcie_set_bus_nr(int nr)
-{
-	orion_clrbits(PCIE_STAT, PCIE_STAT_BUS_MASK);
-	orion_setbits(PCIE_STAT, nr << PCIE_STAT_BUS_OFFS);
-}
-
-static void orion_pcie_master_slave_enable(void)
-{
-	orion_setbits(PCIE_CMD_STAT, PCI_COMMAND_MASTER |
-					  PCI_COMMAND_IO |
-					  PCI_COMMAND_MEMORY);
-}
-
-static void orion_pcie_enable_interrupts(void)
-{
-	/*
-	 * Enable interrupts lines
-	 * INTA[24] INTB[25] INTC[26] INTD[27]
-	 */
-	orion_setbits(PCIE_MASK, 0xf<<24);
-}
-
-static int orion_pcie_valid_config(u32 bus, u32 dev)
-{
-	/*
-	 * Don't go out when trying to access --
-	 * 1. our own device
-	 * 2. where there's no device connected (no link)
-	 * 3. nonexisting devices on local bus
-	 */
-
-	if ((orion_pcie_local_bus_nr() == bus) &&
-	   (orion_pcie_local_dev_nr() == dev))
-		return 0;
-
-	if (orion_pcie_no_link())
-		return 0;
-
-	if (bus == orion_pcie_local_bus_nr())
-		if (((orion_pcie_local_dev_nr() == 0) && (dev != 1)) ||
-		   ((orion_pcie_local_dev_nr() != 0) && (dev != 0)))
-		return 0;
-
-	return 1;
-}
-
-static int orion_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-						int size, u32 *val)
-{
-	unsigned long flags;
-	unsigned int dev, rev, pcie_addr;
-
-	if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	spin_lock_irqsave(&orion_pcie_lock, flags);
-
-	orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
-			PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-			PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-			PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
-
-	orion_pcie_id(&dev, &rev);
-	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
-		/* extended register space */
-		pcie_addr = ORION_PCIE_WA_VIRT_BASE;
-		pcie_addr |= PCIE_CONF_BUS(bus->number) |
-			PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-			PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-			PCIE_CONF_REG(where);
-		*val = orion_read(pcie_addr);
-	} else
-		*val = orion_read(PCIE_CONF_DATA);
-
-	if (size == 1)
-		*val = (*val >> (8*(where & 0x3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8*(where & 0x3))) & 0xffff;
-
-	spin_unlock_irqrestore(&orion_pcie_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int orion_pcie_wr_conf(struct pci_bus *bus, u32 devfn, int where,
-						int size, u32 val)
-{
-	unsigned long flags;
-	int ret;
-
-	if (orion_pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	spin_lock_irqsave(&orion_pcie_lock, flags);
-
-	ret = PCIBIOS_SUCCESSFUL;
-
-	orion_write(PCIE_CONF_ADDR, PCIE_CONF_BUS(bus->number) |
-			PCIE_CONF_DEV(PCI_SLOT(devfn)) |
-			PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
-			PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN);
-
-	if (size == 4) {
-		__raw_writel(val, PCIE_CONF_DATA);
-	} else if (size == 2) {
-		__raw_writew(val, PCIE_CONF_DATA + (where & 0x3));
-	} else if (size == 1) {
-		__raw_writeb(val, PCIE_CONF_DATA + (where & 0x3));
-	} else {
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	spin_unlock_irqrestore(&orion_pcie_lock, flags);
-
-	return ret;
-}
-
-struct pci_ops orion_pcie_ops = {
-	.read = orion_pcie_rd_conf,
-	.write = orion_pcie_wr_conf,
-};
-
-
-static int orion_pcie_setup(struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	/*
-	 * Master + Slave enable
-	 */
-	orion_pcie_master_slave_enable();
-
-	/*
-	 * Enable interrupts lines A-D
-	 */
-	orion_pcie_enable_interrupts();
-
-	/*
-	 * Request resource
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("orion_pci_setup unable to alloc resources");
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	res[0].name = "PCI-EX I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION_PCIE_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION_PCIE_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCIE IO resource failed\n");
-	sys->resource[0] = &res[0];
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	res[1].name = "PCI-EX Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION_PCIE_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION_PCIE_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCIE Memory resource failed\n");
-	sys->resource[1] = &res[1];
-
-	sys->resource[2] = NULL;
-	sys->io_offset = 0;
-
-	return 1;
-}
-
-/*****************************************************************************
- * PCI controller
- ****************************************************************************/
-#define PCI_MODE		ORION_PCI_REG(0xd00)
-#define PCI_CMD			ORION_PCI_REG(0xc00)
-#define PCI_P2P_CONF		ORION_PCI_REG(0x1d14)
-#define PCI_CONF_ADDR		ORION_PCI_REG(0xc78)
-#define PCI_CONF_DATA		ORION_PCI_REG(0xc7c)
-
-/*
- * PCI_MODE bits
- */
-#define PCI_MODE_64BIT			(1 << 2)
-#define PCI_MODE_PCIX			((1 << 4) | (1 << 5))
-
-/*
- * PCI_CMD bits
- */
-#define PCI_CMD_HOST_REORDER		(1 << 29)
-
-/*
- * PCI_P2P_CONF bits
- */
-#define PCI_P2P_BUS_OFFS		16
-#define PCI_P2P_BUS_MASK		(0xff << PCI_P2P_BUS_OFFS)
-#define PCI_P2P_DEV_OFFS		24
-#define PCI_P2P_DEV_MASK		(0x1f << PCI_P2P_DEV_OFFS)
-
-/*
- * PCI_CONF_ADDR bits
- */
-#define PCI_CONF_REG(reg)		((reg) & 0xfc)
-#define PCI_CONF_FUNC(func)		(((func) & 0x3) << 8)
-#define PCI_CONF_DEV(dev)		(((dev) & 0x1f) << 11)
-#define PCI_CONF_BUS(bus)		(((bus) & 0xff) << 16)
-#define PCI_CONF_ADDR_EN		(1 << 31)
-
-/*
- * Internal configuration space
- */
-#define PCI_CONF_FUNC_STAT_CMD		0
-#define PCI_CONF_REG_STAT_CMD		4
-#define PCIX_STAT			0x64
-#define PCIX_STAT_BUS_OFFS		8
-#define PCIX_STAT_BUS_MASK		(0xff << PCIX_STAT_BUS_OFFS)
-
-/*
- * PCI config cycles are done by programming the PCI_CONF_ADDR register
- * and then reading the PCI_CONF_DATA register. Need to make sure these
- * transactions are atomic.
- */
-static DEFINE_SPINLOCK(orion_pci_lock);
-
-u32 orion_pci_local_bus_nr(void)
-{
-	u32 conf = orion_read(PCI_P2P_CONF);
-	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
-}
-
-u32 orion_pci_local_dev_nr(void)
-{
-	u32 conf = orion_read(PCI_P2P_CONF);
-	return((conf & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS);
-}
-
-int orion_pci_hw_rd_conf(u32 bus, u32 dev, u32 func,
-					u32 where, u32 size, u32 *val)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&orion_pci_lock, flags);
-
-	orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
-
-	*val = orion_read(PCI_CONF_DATA);
-
-	if (size == 1)
-		*val = (*val >> (8*(where & 0x3))) & 0xff;
-	else if (size == 2)
-		*val = (*val >> (8*(where & 0x3))) & 0xffff;
-
-	spin_unlock_irqrestore(&orion_pci_lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int orion_pci_hw_wr_conf(u32 bus, u32 dev, u32 func,
-					u32 where, u32 size, u32 val)
-{
-	unsigned long flags;
-	int ret = PCIBIOS_SUCCESSFUL;
-
-	spin_lock_irqsave(&orion_pci_lock, flags);
-
-	orion_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
-			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
-			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
-
-	if (size == 4) {
-		__raw_writel(val, PCI_CONF_DATA);
-	} else if (size == 2) {
-		__raw_writew(val, PCI_CONF_DATA + (where & 0x3));
-	} else if (size == 1) {
-		__raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
-	} else {
-		ret = PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	spin_unlock_irqrestore(&orion_pci_lock, flags);
-
-	return ret;
-}
-
-static int orion_pci_rd_conf(struct pci_bus *bus, u32 devfn,
-				int where, int size, u32 *val)
-{
-	/*
-	 * Don't go out for local device
-	 */
-	if ((orion_pci_local_bus_nr() == bus->number) &&
-	   (orion_pci_local_dev_nr() == PCI_SLOT(devfn))) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return orion_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
-					PCI_FUNC(devfn), where, size, val);
-}
-
-static int orion_pci_wr_conf(struct pci_bus *bus, u32 devfn,
-				int where, int size, u32 val)
-{
-	/*
-	 * Don't go out for local device
-	 */
-	if ((orion_pci_local_bus_nr() == bus->number) &&
-	   (orion_pci_local_dev_nr() == PCI_SLOT(devfn)))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return orion_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
-					PCI_FUNC(devfn), where, size, val);
-}
-
-struct pci_ops orion_pci_ops = {
-	.read = orion_pci_rd_conf,
-	.write = orion_pci_wr_conf,
-};
-
-static void orion_pci_set_bus_nr(int nr)
-{
-	u32 p2p = orion_read(PCI_P2P_CONF);
-
-	if (orion_read(PCI_MODE) & PCI_MODE_PCIX) {
-		/*
-		 * PCI-X mode
-		 */
-		u32 pcix_status, bus, dev;
-		bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
-		dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
-		orion_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
-		pcix_status &= ~PCIX_STAT_BUS_MASK;
-		pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
-		orion_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
-	} else {
-		/*
-		 * PCI Conventional mode
-		 */
-		p2p &= ~PCI_P2P_BUS_MASK;
-		p2p |= (nr << PCI_P2P_BUS_OFFS);
-		orion_write(PCI_P2P_CONF, p2p);
-	}
-}
-
-static void orion_pci_master_slave_enable(void)
-{
-	u32 bus_nr, dev_nr, func, reg, val;
-
-	bus_nr = orion_pci_local_bus_nr();
-	dev_nr = orion_pci_local_dev_nr();
-	func = PCI_CONF_FUNC_STAT_CMD;
-	reg = PCI_CONF_REG_STAT_CMD;
-	orion_pci_hw_rd_conf(bus_nr, dev_nr, func, reg, 4, &val);
-	val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-	orion_pci_hw_wr_conf(bus_nr, dev_nr, func, reg, 4, val | 0x7);
-}
-
-static int orion_pci_setup(struct pci_sys_data *sys)
-{
-	struct resource *res;
-
-	/*
-	 * Master + Slave enable
-	 */
-	orion_pci_master_slave_enable();
-
-	/*
-	 * Force ordering
-	 */
-	orion_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
-
-	/*
-	 * Request resources
-	 */
-	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
-	if (!res)
-		panic("orion_pci_setup unable to alloc resources");
-
-	/*
-	 * IORESOURCE_IO
-	 */
-	res[0].name = "PCI I/O Space";
-	res[0].flags = IORESOURCE_IO;
-	res[0].start = ORION_PCI_IO_BUS_BASE;
-	res[0].end = res[0].start + ORION_PCI_IO_SIZE - 1;
-	if (request_resource(&ioport_resource, &res[0]))
-		panic("Request PCI IO resource failed\n");
-	sys->resource[0] = &res[0];
-
-	/*
-	 * IORESOURCE_MEM
-	 */
-	res[1].name = "PCI Memory Space";
-	res[1].flags = IORESOURCE_MEM;
-	res[1].start = ORION_PCI_MEM_PHYS_BASE;
-	res[1].end = res[1].start + ORION_PCI_MEM_SIZE - 1;
-	if (request_resource(&iomem_resource, &res[1]))
-		panic("Request PCI Memory resource failed\n");
-	sys->resource[1] = &res[1];
-
-	sys->resource[2] = NULL;
-	sys->io_offset = 0;
-
-	return 1;
-}
-
-
-/*****************************************************************************
- * General PCIE + PCI
- ****************************************************************************/
-int orion_pci_sys_setup(int nr, struct pci_sys_data *sys)
-{
-	int ret = 0;
-
-	if (nr == 0) {
-		/*
-		 * PCIE setup
-		 */
-		orion_pcie_set_bus_nr(0);
-		ret = orion_pcie_setup(sys);
-	} else if (nr == 1) {
-		/*
-		 * PCI setup
-		 */
-		ret = orion_pci_setup(sys);
-	}
-
-	return ret;
-}
-
-struct pci_bus *orion_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	struct pci_ops *ops;
-	struct pci_bus *bus;
-
-
-	if (nr == 0) {
-		u32 pci_bus;
-		/*
-		 * PCIE scan
-		 */
-		ops = &orion_pcie_ops;
-		bus = pci_scan_bus(sys->busnr, ops, sys);
-		/*
-		 * Set local PCI bus number to follow PCIE bridges (if any)
-		 */
-		pci_bus	= bus->number + bus->subordinate - bus->secondary + 1;
-		orion_pci_set_bus_nr(pci_bus);
-	} else if (nr == 1) {
-		/*
-		 * PCI scan
-		 */
-		ops = &orion_pci_ops;
-		bus = pci_scan_bus(sys->busnr, ops, sys);
-	} else {
-		BUG();
-		bus = NULL;
-	}
-
-	return bus;
-}
diff --git a/arch/arm/mach-orion/time.c b/arch/arm/mach-orion/time.c
deleted file mode 100644
index bd4262da4f40..000000000000
--- a/arch/arm/mach-orion/time.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * arch/arm/mach-orion/time.c
- *
- * Core time functions for Marvell Orion System On Chip
- *
- * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/mach/time.h>
-#include <asm/arch/orion.h>
-#include "common.h"
-
-/*
- * Timer0: clock_event_device, Tick.
- * Timer1: clocksource, Free running.
- * WatchDog: Not used.
- *
- * Timers are counting down.
- */
-#define CLOCKEVENT	0
-#define CLOCKSOURCE	1
-
-/*
- * Timers bits
- */
-#define BRIDGE_INT_TIMER(x)	(1 << ((x) + 1))
-#define TIMER_EN(x)		(1 << ((x) * 2))
-#define TIMER_RELOAD_EN(x)	(1 << (((x) * 2) + 1))
-#define BRIDGE_INT_TIMER_WD	(1 << 3)
-#define TIMER_WD_EN		(1 << 4)
-#define TIMER_WD_RELOAD_EN	(1 << 5)
-
-static cycle_t orion_clksrc_read(void)
-{
-	return (0xffffffff - orion_read(TIMER_VAL(CLOCKSOURCE)));
-}
-
-static struct clocksource orion_clksrc = {
-	.name		= "orion_clocksource",
-	.shift		= 20,
-	.rating		= 300,
-	.read		= orion_clksrc_read,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int
-orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	if (delta == 0)
-		return -ETIME;
-
-	local_irq_save(flags);
-
-	/*
-	 * Clear and enable timer interrupt bit
-	 */
-	orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
-	orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
-
-	/*
-	 * Setup new timer value
-	 */
-	orion_write(TIMER_VAL(CLOCKEVENT), delta);
-
-	/*
-	 * Disable auto reload and kickoff the timer
-	 */
-	orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT));
-	orion_setbits(TIMER_CTRL, TIMER_EN(CLOCKEVENT));
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void
-orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	if (mode == CLOCK_EVT_MODE_PERIODIC) {
-		/*
-		 * Setup latch cycles in timer and enable reload interrupt.
-		 */
-		orion_write(TIMER_VAL_RELOAD(CLOCKEVENT), LATCH);
-		orion_write(TIMER_VAL(CLOCKEVENT), LATCH);
-		orion_setbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
-		orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
-					  TIMER_EN(CLOCKEVENT));
-	} else {
-		/*
-		 * Disable timer and interrupt
-		 */
-		orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKEVENT));
-		orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
-		orion_clrbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKEVENT) |
-					  TIMER_EN(CLOCKEVENT));
-	}
-
-	local_irq_restore(flags);
-}
-
-static struct clock_event_device orion_clkevt = {
-	.name		= "orion_tick",
-	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
-	.rating		= 300,
-	.cpumask	= CPU_MASK_CPU0,
-	.set_next_event	= orion_clkevt_next_event,
-	.set_mode	= orion_clkevt_mode,
-};
-
-static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
-{
-	/*
-	 * Clear cause bit and do event
-	 */
-	orion_write(BRIDGE_CAUSE, ~BRIDGE_INT_TIMER(CLOCKEVENT));
-	orion_clkevt.event_handler(&orion_clkevt);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction orion_timer_irq = {
-	.name		= "orion_tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER,
-	.handler	= orion_timer_interrupt
-};
-
-static void orion_timer_init(void)
-{
-	/*
-	 * Setup clocksource free running timer (no interrupt on reload)
-	 */
-	orion_write(TIMER_VAL(CLOCKSOURCE), 0xffffffff);
-	orion_write(TIMER_VAL_RELOAD(CLOCKSOURCE), 0xffffffff);
-	orion_clrbits(BRIDGE_MASK, BRIDGE_INT_TIMER(CLOCKSOURCE));
-	orion_setbits(TIMER_CTRL, TIMER_RELOAD_EN(CLOCKSOURCE) |
-				  TIMER_EN(CLOCKSOURCE));
-
-	/*
-	 * Register clocksource
-	 */
-	orion_clksrc.mult =
-		clocksource_hz2mult(CLOCK_TICK_RATE, orion_clksrc.shift);
-
-	clocksource_register(&orion_clksrc);
-
-	/*
-	 * Connect and enable tick handler
-	 */
-	setup_irq(IRQ_ORION_BRIDGE, &orion_timer_irq);
-
-	/*
-	 * Register clockevent
-	 */
-	orion_clkevt.mult =
-		div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, orion_clkevt.shift);
-	orion_clkevt.max_delta_ns =
-		clockevent_delta2ns(0xfffffffe, &orion_clkevt);
-	orion_clkevt.min_delta_ns =
-		clockevent_delta2ns(1, &orion_clkevt);
-
-	clockevents_register_device(&orion_clkevt);
-}
-
-struct sys_timer orion_timer = {
-	.init = orion_timer_init,
-};
diff --git a/arch/arm/mach-orion/Kconfig b/arch/arm/mach-orion5x/Kconfig
index 1dcbb6ac5a30..93debf336155 100644
--- a/arch/arm/mach-orion/Kconfig
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -1,4 +1,4 @@
-if ARCH_ORION
+if ARCH_ORION5X
 
 menu "Orion Implementations"
 
@@ -36,6 +36,14 @@ config MACH_TS209
 	  Say 'Y' here if you want your kernel to support the
 	  QNAP TS-109/TS-209 platform.
 
+config MACH_LINKSTATION_PRO
+	bool "Buffalo Linkstation Pro/Live"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation Pro/Live platform. Both v1 and
+	  v2 devices are supported.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-orion/Makefile b/arch/arm/mach-orion5x/Makefile
index f91d937a73e8..9301bf55910b 100644
--- a/arch/arm/mach-orion/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -1,6 +1,7 @@
-obj-y				+= common.o addr-map.o pci.o gpio.o irq.o time.o
+obj-y				+= common.o addr-map.o pci.o gpio.o irq.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
 obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
 obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
 obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o
diff --git a/arch/arm/mach-orion/Makefile.boot b/arch/arm/mach-orion5x/Makefile.boot
index 67039c3e0c48..67039c3e0c48 100644
--- a/arch/arm/mach-orion/Makefile.boot
+++ b/arch/arm/mach-orion5x/Makefile.boot
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
new file mode 100644
index 000000000000..6b179371e0a2
--- /dev/null
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -0,0 +1,240 @@
+/*
+ * arch/arm/mach-orion5x/addr-map.c
+ *
+ * Address map functions for Marvell Orion 5x SoCs
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include "common.h"
+
+/*
+ * The Orion has fully programable address map. There's a separate address
+ * map for each of the device _master_ interfaces, e.g. CPU, PCI, PCIE, USB,
+ * Gigabit Ethernet, DMA/XOR engines, etc. Each interface has its own
+ * address decode windows that allow it to access any of the Orion resources.
+ *
+ * CPU address decoding --
+ * Linux assumes that it is the boot loader that already setup the access to
+ * DDR and internal registers.
+ * Setup access to PCI and PCI-E IO/MEM space is issued by this file.
+ * Setup access to various devices located on the device bus interface (e.g.
+ * flashes, RTC, etc) should be issued by machine-setup.c according to
+ * specific board population (by using orion5x_setup_*_win()).
+ *
+ * Non-CPU Masters address decoding --
+ * Unlike the CPU, we setup the access from Orion's master interfaces to DDR
+ * banks only (the typical use case).
+ * Setup access for each master to DDR is issued by common.c.
+ *
+ * Note: although orion_setbits() and orion_clrbits() are not atomic
+ * no locking is necessary here since code in this file is only called
+ * at boot time when there is no concurrency issues.
+ */
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0
+#define TARGET_DEV_BUS		1
+#define TARGET_PCI		3
+#define TARGET_PCIE		4
+#define ATTR_DDR_CS(n)		(((n) ==0) ? 0xe :	\
+				((n) == 1) ? 0xd :	\
+				((n) == 2) ? 0xb :	\
+				((n) == 3) ? 0x7 : 0xf)
+#define ATTR_PCIE_MEM		0x59
+#define ATTR_PCIE_IO		0x51
+#define ATTR_PCIE_WA		0x79
+#define ATTR_PCI_MEM		0x59
+#define ATTR_PCI_IO		0x51
+#define ATTR_DEV_CS0		0x1e
+#define ATTR_DEV_CS1		0x1d
+#define ATTR_DEV_CS2		0x1b
+#define ATTR_DEV_BOOT		0xf
+#define WIN_EN			1
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS(n)		ORION5X_DDR_REG(0x1500 + ((n) * 8))
+#define DDR_SIZE_CS(n)		ORION5X_DDR_REG(0x1504 + ((n) * 8))
+#define DDR_MAX_CS		4
+#define DDR_REG_TO_SIZE(reg)	(((reg) | 0xffffff) + 1)
+#define DDR_REG_TO_BASE(reg)	((reg) & 0xff000000)
+#define DDR_BANK_EN		1
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define CPU_WIN_CTRL(n)		ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
+#define CPU_WIN_BASE(n)		ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
+#define CPU_WIN_REMAP_LO(n)	ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
+#define CPU_WIN_REMAP_HI(n)	ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
+
+/*
+ * Gigabit Ethernet Address Decode Windows registers
+ */
+#define ETH_WIN_BASE(win)	ORION5X_ETH_REG(0x200 + ((win) * 8))
+#define ETH_WIN_SIZE(win)	ORION5X_ETH_REG(0x204 + ((win) * 8))
+#define ETH_WIN_REMAP(win)	ORION5X_ETH_REG(0x280 + ((win) * 4))
+#define ETH_WIN_EN		ORION5X_ETH_REG(0x290)
+#define ETH_WIN_PROT		ORION5X_ETH_REG(0x294)
+#define ETH_MAX_WIN		6
+#define ETH_MAX_REMAP_WIN	4
+
+
+struct mbus_dram_target_info orion5x_mbus_dram_info;
+
+static int __init orion5x_cpu_win_can_remap(int win)
+{
+	u32 dev, rev;
+
+	orion5x_pcie_id(&dev, &rev);
+	if ((dev == MV88F5281_DEV_ID && win < 4)
+	    || (dev == MV88F5182_DEV_ID && win < 2)
+	    || (dev == MV88F5181_DEV_ID && win < 2))
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	orion5x_write(CPU_WIN_BASE(win), base & 0xffff0000);
+	orion5x_write(CPU_WIN_CTRL(win),
+		((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1);
+
+	if (orion5x_cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+
+		orion5x_write(CPU_WIN_REMAP_LO(win), remap & 0xffff0000);
+		orion5x_write(CPU_WIN_REMAP_HI(win), 0);
+	}
+}
+
+void __init orion5x_setup_cpu_mbus_bridge(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		orion5x_write(CPU_WIN_BASE(i), 0);
+		orion5x_write(CPU_WIN_CTRL(i), 0);
+		if (orion5x_cpu_win_can_remap(i)) {
+			orion5x_write(CPU_WIN_REMAP_LO(i), 0);
+			orion5x_write(CPU_WIN_REMAP_HI(i), 0);
+		}
+	}
+
+	/*
+	 * Setup windows for PCI+PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
+		TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE);
+	setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
+		TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE);
+	setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
+		TARGET_PCIE, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
+		TARGET_PCI, ATTR_PCI_MEM, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 4; i++) {
+		u32 base = readl(DDR_BASE_CS(i));
+		u32 size = readl(DDR_SIZE_CS(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (size & 1) {
+			struct mbus_dram_window *w;
+
+			w = &orion5x_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0xf & ~(1 << i);
+			w->base = base & 0xff000000;
+			w->size = (size | 0x00ffffff) + 1;
+		}
+	}
+	orion5x_mbus_dram_info.num_cs = cs;
+}
+
+void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
+{
+	setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+}
+
+void __init orion5x_setup_dev0_win(u32 base, u32 size)
+{
+	setup_cpu_win(5, base, size, TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+}
+
+void __init orion5x_setup_dev1_win(u32 base, u32 size)
+{
+	setup_cpu_win(6, base, size, TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+}
+
+void __init orion5x_setup_dev2_win(u32 base, u32 size)
+{
+	setup_cpu_win(7, base, size, TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+}
+
+void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
+{
+	setup_cpu_win(7, base, size, TARGET_PCIE, ATTR_PCIE_WA, -1);
+}
+
+void __init orion5x_setup_eth_wins(void)
+{
+	int i;
+
+	/*
+	 * First, disable and clear windows
+	 */
+	for (i = 0; i < ETH_MAX_WIN; i++) {
+		orion5x_write(ETH_WIN_BASE(i), 0);
+		orion5x_write(ETH_WIN_SIZE(i), 0);
+		orion5x_setbits(ETH_WIN_EN, 1 << i);
+		orion5x_clrbits(ETH_WIN_PROT, 0x3 << (i * 2));
+		if (i < ETH_MAX_REMAP_WIN)
+			orion5x_write(ETH_WIN_REMAP(i), 0);
+	}
+
+	/*
+	 * Setup windows for DDR banks.
+	 */
+	for (i = 0; i < DDR_MAX_CS; i++) {
+		u32 base, size;
+		size = orion5x_read(DDR_SIZE_CS(i));
+		base = orion5x_read(DDR_BASE_CS(i));
+		if (size & DDR_BANK_EN) {
+			base = DDR_REG_TO_BASE(base);
+			size = DDR_REG_TO_SIZE(size);
+			orion5x_write(ETH_WIN_SIZE(i), (size-1) & 0xffff0000);
+			orion5x_write(ETH_WIN_BASE(i), (base & 0xffff0000) |
+					(ATTR_DDR_CS(i) << 8) |
+					TARGET_DDR);
+			orion5x_clrbits(ETH_WIN_EN, 1 << i);
+			orion5x_setbits(ETH_WIN_PROT, 0x3 << (i * 2));
+		}
+	}
+}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
new file mode 100644
index 000000000000..439c7784af02
--- /dev/null
+++ b/arch/arm/mach-orion5x/common.c
@@ -0,0 +1,391 @@
+/*
+ * arch/arm/mach-orion5x/common.c
+ *
+ * Core functions for Marvell Orion 5x SoCs
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/ehci-orion.h>
+#include <asm/plat-orion/orion_nand.h>
+#include <asm/plat-orion/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc orion5x_io_desc[] __initdata = {
+	{
+		.virtual	= ORION5X_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
+		.length		= ORION5X_REGS_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= ORION5X_PCIE_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ORION5X_PCIE_IO_PHYS_BASE),
+		.length		= ORION5X_PCIE_IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= ORION5X_PCI_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ORION5X_PCI_IO_PHYS_BASE),
+		.length		= ORION5X_PCI_IO_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= ORION5X_PCIE_WA_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
+		.length		= ORION5X_PCIE_WA_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init orion5x_map_io(void)
+{
+	iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
+}
+
+/*****************************************************************************
+ * UART
+ ****************************************************************************/
+
+static struct resource orion5x_uart_resources[] = {
+	{
+		.start		= UART0_PHYS_BASE,
+		.end		= UART0_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_ORION5X_UART0,
+		.end		= IRQ_ORION5X_UART0,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{
+		.start		= UART1_PHYS_BASE,
+		.end		= UART1_PHYS_BASE + 0xff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_ORION5X_UART1,
+		.end		= IRQ_ORION5X_UART1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct plat_serial8250_port orion5x_uart_data[] = {
+	{
+		.mapbase	= UART0_PHYS_BASE,
+		.membase	= (char *)UART0_VIRT_BASE,
+		.irq		= IRQ_ORION5X_UART0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= ORION5X_TCLK,
+	},
+	{
+		.mapbase	= UART1_PHYS_BASE,
+		.membase	= (char *)UART1_VIRT_BASE,
+		.irq		= IRQ_ORION5X_UART1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= ORION5X_TCLK,
+	},
+	{ },
+};
+
+static struct platform_device orion5x_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= orion5x_uart_data,
+	},
+	.resource		= orion5x_uart_resources,
+	.num_resources		= ARRAY_SIZE(orion5x_uart_resources),
+};
+
+/*******************************************************************************
+ * USB Controller - 2 interfaces
+ ******************************************************************************/
+
+static struct resource orion5x_ehci0_resources[] = {
+	{
+		.start	= ORION5X_USB0_PHYS_BASE,
+		.end	= ORION5X_USB0_PHYS_BASE + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_ORION5X_USB0_CTRL,
+		.end	= IRQ_ORION5X_USB0_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource orion5x_ehci1_resources[] = {
+	{
+		.start	= ORION5X_USB1_PHYS_BASE,
+		.end	= ORION5X_USB1_PHYS_BASE + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_ORION5X_USB1_CTRL,
+		.end	= IRQ_ORION5X_USB1_CTRL,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct orion_ehci_data orion5x_ehci_data = {
+	.dram		= &orion5x_mbus_dram_info,
+};
+
+static u64 ehci_dmamask = 0xffffffffUL;
+
+static struct platform_device orion5x_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &orion5x_ehci_data,
+	},
+	.resource	= orion5x_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(orion5x_ehci0_resources),
+};
+
+static struct platform_device orion5x_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &orion5x_ehci_data,
+	},
+	.resource	= orion5x_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(orion5x_ehci1_resources),
+};
+
+/*****************************************************************************
+ * Gigabit Ethernet port
+ * (The Orion and Discovery (MV643xx) families use the same Ethernet driver)
+ ****************************************************************************/
+
+static struct resource orion5x_eth_shared_resources[] = {
+	{
+		.start	= ORION5X_ETH_PHYS_BASE + 0x2000,
+		.end	= ORION5X_ETH_PHYS_BASE + 0x3fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device orion5x_eth_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= orion5x_eth_shared_resources,
+};
+
+static struct resource orion5x_eth_resources[] = {
+	{
+		.name	= "eth irq",
+		.start	= IRQ_ORION5X_ETH_SUM,
+		.end	= IRQ_ORION5X_ETH_SUM,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device orion5x_eth = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= orion5x_eth_resources,
+};
+
+void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	orion5x_eth.dev.platform_data = eth_data;
+	platform_device_register(&orion5x_eth_shared);
+	platform_device_register(&orion5x_eth);
+}
+
+/*****************************************************************************
+ * I2C controller
+ * (The Orion and Discovery (MV643xx) families share the same I2C controller)
+ ****************************************************************************/
+
+static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
+	.freq_m		= 8, /* assumes 166 MHz TCLK */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource orion5x_i2c_resources[] = {
+	{
+		.name   = "i2c base",
+		.start  = I2C_PHYS_BASE,
+		.end    = I2C_PHYS_BASE + 0x20 -1,
+		.flags  = IORESOURCE_MEM,
+	},
+	{
+		.name   = "i2c irq",
+		.start  = IRQ_ORION5X_I2C,
+		.end    = IRQ_ORION5X_I2C,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device orion5x_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(orion5x_i2c_resources),
+	.resource	= orion5x_i2c_resources,
+	.dev		= {
+		.platform_data = &orion5x_i2c_pdata,
+	},
+};
+
+/*****************************************************************************
+ * Sata port
+ ****************************************************************************/
+static struct resource orion5x_sata_resources[] = {
+        {
+                .name   = "sata base",
+                .start  = ORION5X_SATA_PHYS_BASE,
+                .end    = ORION5X_SATA_PHYS_BASE + 0x5000 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+	{
+                .name   = "sata irq",
+                .start  = IRQ_ORION5X_SATA,
+                .end    = IRQ_ORION5X_SATA,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device orion5x_sata = {
+	.name           = "sata_mv",
+	.id             = 0,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(orion5x_sata_resources),
+	.resource       = orion5x_sata_resources,
+};
+
+void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &orion5x_mbus_dram_info;
+	orion5x_sata.dev.platform_data = sata_data;
+	platform_device_register(&orion5x_sata);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+
+static void orion5x_timer_init(void)
+{
+	orion_time_init(IRQ_ORION5X_BRIDGE, ORION5X_TCLK);
+}
+
+struct sys_timer orion5x_timer = {
+        .init = orion5x_timer_init,
+};
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+
+/*
+ * Identify device ID and rev from PCIE configuration header space '0'.
+ */
+static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
+{
+	orion5x_pcie_id(dev, rev);
+
+	if (*dev == MV88F5281_DEV_ID) {
+		if (*rev == MV88F5281_REV_D2) {
+			*dev_name = "MV88F5281-D2";
+		} else if (*rev == MV88F5281_REV_D1) {
+			*dev_name = "MV88F5281-D1";
+		} else {
+			*dev_name = "MV88F5281-Rev-Unsupported";
+		}
+	} else if (*dev == MV88F5182_DEV_ID) {
+		if (*rev == MV88F5182_REV_A2) {
+			*dev_name = "MV88F5182-A2";
+		} else {
+			*dev_name = "MV88F5182-Rev-Unsupported";
+		}
+	} else if (*dev == MV88F5181_DEV_ID) {
+		if (*rev == MV88F5181_REV_B1) {
+			*dev_name = "MV88F5181-Rev-B1";
+		} else {
+			*dev_name = "MV88F5181-Rev-Unsupported";
+		}
+	} else {
+		*dev_name = "Device-Unknown";
+	}
+}
+
+void __init orion5x_init(void)
+{
+	char *dev_name;
+	u32 dev, rev;
+
+	orion5x_id(&dev, &rev, &dev_name);
+	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, ORION5X_TCLK);
+
+	/*
+	 * Setup Orion address map
+	 */
+	orion5x_setup_cpu_mbus_bridge();
+	orion5x_setup_eth_wins();
+
+	/*
+	 * Register devices.
+	 */
+	platform_device_register(&orion5x_uart);
+	platform_device_register(&orion5x_ehci0);
+	if (dev == MV88F5182_DEV_ID)
+		platform_device_register(&orion5x_ehci1);
+	platform_device_register(&orion5x_i2c);
+}
+
+/*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+void __init tag_fixup_mem32(struct machine_desc *mdesc, struct tag *t,
+			    char **from, struct meminfo *meminfo)
+{
+	for (; t->hdr.size; t = tag_next(t))
+		if (t->hdr.tag == ATAG_MEM &&
+		    (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+		     t->u.mem.start & ~PAGE_MASK)) {
+			printk(KERN_WARNING
+			       "Clearing invalid memory bank %dKB@0x%08x\n",
+			       t->u.mem.size / 1024, t->u.mem.start);
+			t->hdr.tag = 0;
+		}
+}
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
new file mode 100644
index 000000000000..f4c4c9a72a7c
--- /dev/null
+++ b/arch/arm/mach-orion5x/common.h
@@ -0,0 +1,72 @@
+#ifndef __ARCH_ORION5X_COMMON_H
+#define __ARCH_ORION5X_COMMON_H
+
+/*
+ * Basic Orion init functions used early by machine-setup.
+ */
+
+void orion5x_map_io(void);
+void orion5x_init_irq(void);
+void orion5x_init(void);
+extern struct sys_timer orion5x_timer;
+
+/*
+ * Enumerations and functions for Orion windows mapping. Used by Orion core
+ * functions to map its interfaces and by the machine-setup to map its on-
+ * board devices. Details in /mach-orion/addr-map.c
+ */
+extern struct mbus_dram_target_info orion5x_mbus_dram_info;
+void orion5x_setup_cpu_mbus_bridge(void);
+void orion5x_setup_dev_boot_win(u32 base, u32 size);
+void orion5x_setup_dev0_win(u32 base, u32 size);
+void orion5x_setup_dev1_win(u32 base, u32 size);
+void orion5x_setup_dev2_win(u32 base, u32 size);
+void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+void orion5x_setup_eth_wins(void);
+
+/*
+ * Shared code used internally by other Orion core functions.
+ * (/mach-orion/pci.c)
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+void orion5x_pcie_id(u32 *dev, u32 *rev);
+int orion5x_pcie_local_bus_nr(void);
+int orion5x_pci_local_bus_nr(void);
+int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * Valid GPIO pins according to MPP setup, used by machine-setup.
+ * (/mach-orion/gpio.c).
+ */
+
+void orion5x_gpio_set_valid_pins(u32 pins);
+void gpio_display(void);	/* debug */
+
+/*
+ * Pull in Orion Ethernet platform_data, used by machine-setup
+ */
+
+struct mv643xx_eth_platform_data;
+
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+
+/*
+ * Orion Sata platform_data, used by machine-setup
+ */
+
+struct mv_sata_platform_data;
+
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+
+struct machine_desc;
+struct meminfo;
+struct tag;
+extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *,
+				   char **, struct meminfo *);
+
+
+#endif
diff --git a/arch/arm/mach-orion/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 5ef44e1a2d36..872aed372327 100644
--- a/arch/arm/mach-orion/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -1,12 +1,12 @@
 /*
- * arch/arm/mach-orion/db88f5281-setup.c
+ * arch/arm/mach-orion5x/db88f5281-setup.c
  *
  * Marvell Orion-2 Development Board Setup
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
@@ -24,8 +24,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -244,8 +244,8 @@ static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIE IRQ is connected internally (not GPIO)
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -265,8 +265,8 @@ static struct hw_pci db88f5281_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= db88f5281_pci_preinit,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= db88f5281_pci_map_irq,
 };
 
@@ -312,19 +312,16 @@ static void __init db88f5281_init(void)
 	/*
 	 * Basic Orion setup. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup the CPU address decode windows for our on-board devices
 	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, DB88F5281_NOR_BOOT_BASE,
-				DB88F5281_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV0,	DB88F5281_7SEG_BASE,
-				DB88F5281_7SEG_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV1, DB88F5281_NOR_BASE,
-				DB88F5281_NOR_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV2,	DB88F5281_NAND_BASE,
-				DB88F5281_NAND_SIZE, -1);
+	orion5x_setup_dev_boot_win(DB88F5281_NOR_BOOT_BASE,
+				DB88F5281_NOR_BOOT_SIZE);
+	orion5x_setup_dev0_win(DB88F5281_7SEG_BASE, DB88F5281_7SEG_SIZE);
+	orion5x_setup_dev1_win(DB88F5281_NOR_BASE, DB88F5281_NOR_SIZE);
+	orion5x_setup_dev2_win(DB88F5281_NAND_BASE, DB88F5281_NAND_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins:
@@ -340,25 +337,25 @@ static void __init db88f5281_init(void)
 	 * MPP18: UART1_CTS			MPP19: UART1_RTS
 	 * MPP-DEV: DEV_D[16:31]
 	 */
-	orion_write(MPP_0_7_CTRL, 0x00222203);
-	orion_write(MPP_8_15_CTRL, 0x44000000);
-	orion_write(MPP_16_19_CTRL, 0);
-	orion_write(MPP_DEV_CTRL, 0);
+	orion5x_write(MPP_0_7_CTRL, 0x00222203);
+	orion5x_write(MPP_8_15_CTRL, 0x44000000);
+	orion5x_write(MPP_16_19_CTRL, 0);
+	orion5x_write(MPP_DEV_CTRL, 0);
 
-	orion_gpio_set_valid_pins(0x00003fc3);
+	orion5x_gpio_set_valid_pins(0x00003fc3);
 
 	platform_add_devices(db88f5281_devs, ARRAY_SIZE(db88f5281_devs));
 	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
-	orion_eth_init(&db88f5281_eth_data);
+	orion5x_eth_init(&db88f5281_eth_data);
 }
 
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.init_machine	= db88f5281_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-orion/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 02b280c24820..d67790ef236e 100644
--- a/arch/arm/mach-orion/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-orion/dns323-setup.c
+ * arch/arm/mach-orion5x/dns323-setup.c
  *
  * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
  *
@@ -25,8 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
@@ -45,8 +44,8 @@
 static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	/* PCI-E */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	pr_err("%s: requested mapping for unknown bus\n", __func__);
 
@@ -56,8 +55,8 @@ static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 static struct hw_pci dns323_pci __initdata = {
 	.nr_controllers = 1,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= dns323_pci_map_irq,
 };
 
@@ -247,27 +246,25 @@ static void dns323_power_off(void)
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
-	orion_init();
+	orion5x_init();
 
 	/* setup flash mapping
 	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
 	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, DNS323_NOR_BOOT_BASE,
-			    DNS323_NOR_BOOT_SIZE, -1);
+	orion5x_setup_dev_boot_win(DNS323_NOR_BOOT_BASE, DNS323_NOR_BOOT_SIZE);
 
 	/* DNS-323 has a Marvell 88X7042 SATA controller attached via PCIE
 	 *
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070,
-		    (0x7941 | (((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/* set MPP to 0 as D-Link's 2.6.12.6 kernel did */
-	orion_write(MPP_0_7_CTRL, 0);
-	orion_write(MPP_8_15_CTRL, 0);
-	orion_write(MPP_16_19_CTRL, 0);
-	orion_write(MPP_DEV_CTRL, 0);
+	orion5x_write(MPP_0_7_CTRL, 0);
+	orion5x_write(MPP_8_15_CTRL, 0);
+	orion5x_write(MPP_16_19_CTRL, 0);
+	orion5x_write(MPP_DEV_CTRL, 0);
 
 	/* Define used GPIO pins
 
@@ -290,7 +287,7 @@ static void __init dns323_init(void)
 	  | 14 | Out | //unknown//
 	  | 15 | Out | //unknown//
 	*/
-	orion_gpio_set_valid_pins(0x07f6);
+	orion5x_gpio_set_valid_pins(0x07f6);
 
 	/* register dns323 specific power-off method */
 	if ((gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0)
@@ -306,17 +303,18 @@ static void __init dns323_init(void)
 	i2c_register_board_info(0, dns323_i2c_devices,
 				ARRAY_SIZE(dns323_i2c_devices));
 
-	orion_eth_init(&dns323_eth_data);
+	orion5x_eth_init(&dns323_eth_data);
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= dns323_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
 MACHINE_END
diff --git a/arch/arm/mach-orion/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d5f00c86d616..8108c316c426 100644
--- a/arch/arm/mach-orion/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -1,12 +1,12 @@
 /*
- * arch/arm/mach-orion/gpio.c
+ * arch/arm/mach-orion5x/gpio.c
  *
  * GPIO functions for Marvell Orion System On Chip
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
@@ -16,14 +16,15 @@
 #include <linux/spinlock.h>
 #include <linux/bitops.h>
 #include <asm/gpio.h>
-#include <asm/arch/orion.h>
+#include <asm/io.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
 static unsigned long gpio_valid[BITS_TO_LONGS(GPIO_MAX)];
 static const char *gpio_label[GPIO_MAX];  /* non null for allocated GPIOs */
 
-void __init orion_gpio_set_valid_pins(u32 pins)
+void __init orion5x_gpio_set_valid_pins(u32 pins)
 {
 	gpio_valid[0] = pins;
 }
@@ -36,7 +37,7 @@ int gpio_direction_input(unsigned pin)
 	unsigned long flags;
 
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
 
@@ -49,7 +50,7 @@ int gpio_direction_input(unsigned pin)
 	if (!gpio_label[pin])
 		gpio_label[pin] = "?";
 
-	orion_setbits(GPIO_IO_CONF, 1 << pin);
+	orion5x_setbits(GPIO_IO_CONF, 1 << pin);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
@@ -62,7 +63,7 @@ int gpio_direction_output(unsigned pin, int value)
 	int mask;
 
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
 
@@ -76,12 +77,12 @@ int gpio_direction_output(unsigned pin, int value)
 		gpio_label[pin] = "?";
 
 	mask = 1 << pin;
-	orion_clrbits(GPIO_BLINK_EN, mask);
+	orion5x_clrbits(GPIO_BLINK_EN, mask);
 	if (value)
-		orion_setbits(GPIO_OUT, mask);
+		orion5x_setbits(GPIO_OUT, mask);
 	else
-		orion_clrbits(GPIO_OUT, mask);
-	orion_clrbits(GPIO_IO_CONF, mask);
+		orion5x_clrbits(GPIO_OUT, mask);
+	orion5x_clrbits(GPIO_IO_CONF, mask);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 	return 0;
@@ -92,10 +93,10 @@ int gpio_get_value(unsigned pin)
 {
 	int val, mask = 1 << pin;
 
-	if (orion_read(GPIO_IO_CONF) & mask)
-		val = orion_read(GPIO_DATA_IN) ^ orion_read(GPIO_IN_POL);
+	if (orion5x_read(GPIO_IO_CONF) & mask)
+		val = orion5x_read(GPIO_DATA_IN) ^ orion5x_read(GPIO_IN_POL);
 	else
-		val = orion_read(GPIO_OUT);
+		val = orion5x_read(GPIO_OUT);
 
 	return val & mask;
 }
@@ -108,32 +109,32 @@ void gpio_set_value(unsigned pin, int value)
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	orion_clrbits(GPIO_BLINK_EN, mask);
+	orion5x_clrbits(GPIO_BLINK_EN, mask);
 	if (value)
-		orion_setbits(GPIO_OUT, mask);
+		orion5x_setbits(GPIO_OUT, mask);
 	else
-		orion_clrbits(GPIO_OUT, mask);
+		orion5x_clrbits(GPIO_OUT, mask);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
 EXPORT_SYMBOL(gpio_set_value);
 
-void orion_gpio_set_blink(unsigned pin, int blink)
+void orion5x_gpio_set_blink(unsigned pin, int blink)
 {
 	unsigned long flags;
 	int mask = 1 << pin;
 
 	spin_lock_irqsave(&gpio_lock, flags);
 
-	orion_clrbits(GPIO_OUT, mask);
+	orion5x_clrbits(GPIO_OUT, mask);
 	if (blink)
-		orion_setbits(GPIO_BLINK_EN, mask);
+		orion5x_setbits(GPIO_BLINK_EN, mask);
 	else
-		orion_clrbits(GPIO_BLINK_EN, mask);
+		orion5x_clrbits(GPIO_BLINK_EN, mask);
 
 	spin_unlock_irqrestore(&gpio_lock, flags);
 }
-EXPORT_SYMBOL(orion_gpio_set_blink);
+EXPORT_SYMBOL(orion5x_gpio_set_blink);
 
 int gpio_request(unsigned pin, const char *label)
 {
@@ -141,7 +142,7 @@ int gpio_request(unsigned pin, const char *label)
 	unsigned long flags;
 
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return -EINVAL;
 	}
 
@@ -149,7 +150,7 @@ int gpio_request(unsigned pin, const char *label)
 
 	if (gpio_label[pin]) {
 		pr_debug("%s: GPIO %d already used as %s\n",
-			 __FUNCTION__, pin, gpio_label[pin]);
+			 __func__, pin, gpio_label[pin]);
 		ret = -EBUSY;
 	} else
 		gpio_label[pin] = label ? label : "?";
@@ -162,12 +163,12 @@ EXPORT_SYMBOL(gpio_request);
 void gpio_free(unsigned pin)
 {
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
-		pr_debug("%s: invalid GPIO %d\n", __FUNCTION__, pin);
+		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return;
 	}
 
 	if (!gpio_label[pin])
-		pr_warning("%s: GPIO %d already freed\n", __FUNCTION__, pin);
+		pr_warning("%s: GPIO %d already freed\n", __func__, pin);
 	else
 		gpio_label[pin] = NULL;
 }
@@ -187,39 +188,39 @@ void gpio_display(void)
 			printk("GPIO, free\n");
 		} else {
 			printk("GPIO, used by %s, ", gpio_label[i]);
-			if (orion_read(GPIO_IO_CONF) & (1 << i)) {
+			if (orion5x_read(GPIO_IO_CONF) & (1 << i)) {
 				printk("input, active %s, level %s, edge %s\n",
-				((orion_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
-				((orion_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
-				((orion_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
+				((orion5x_read(GPIO_IN_POL) >> i) & 1) ? "low" : "high",
+				((orion5x_read(GPIO_LEVEL_MASK) >> i) & 1) ? "enabled" : "masked",
+				((orion5x_read(GPIO_EDGE_MASK) >> i) & 1) ? "enabled" : "masked");
 			} else {
-				printk("output, val=%d\n", (orion_read(GPIO_OUT) >> i) & 1);
+				printk("output, val=%d\n", (orion5x_read(GPIO_OUT) >> i) & 1);
 			}
 		}
 	}
 
 	printk(KERN_DEBUG "MPP_0_7_CTRL (0x%08x) = 0x%08x\n",
-				MPP_0_7_CTRL, orion_read(MPP_0_7_CTRL));
+				MPP_0_7_CTRL, orion5x_read(MPP_0_7_CTRL));
 	printk(KERN_DEBUG "MPP_8_15_CTRL (0x%08x) = 0x%08x\n",
-				MPP_8_15_CTRL, orion_read(MPP_8_15_CTRL));
+				MPP_8_15_CTRL, orion5x_read(MPP_8_15_CTRL));
 	printk(KERN_DEBUG "MPP_16_19_CTRL (0x%08x) = 0x%08x\n",
-				MPP_16_19_CTRL, orion_read(MPP_16_19_CTRL));
+				MPP_16_19_CTRL, orion5x_read(MPP_16_19_CTRL));
 	printk(KERN_DEBUG "MPP_DEV_CTRL (0x%08x) = 0x%08x\n",
-				MPP_DEV_CTRL, orion_read(MPP_DEV_CTRL));
+				MPP_DEV_CTRL, orion5x_read(MPP_DEV_CTRL));
 	printk(KERN_DEBUG "GPIO_OUT (0x%08x) = 0x%08x\n",
-				GPIO_OUT, orion_read(GPIO_OUT));
+				GPIO_OUT, orion5x_read(GPIO_OUT));
 	printk(KERN_DEBUG "GPIO_IO_CONF (0x%08x) = 0x%08x\n",
-				GPIO_IO_CONF, orion_read(GPIO_IO_CONF));
+				GPIO_IO_CONF, orion5x_read(GPIO_IO_CONF));
 	printk(KERN_DEBUG "GPIO_BLINK_EN (0x%08x) = 0x%08x\n",
-				GPIO_BLINK_EN, orion_read(GPIO_BLINK_EN));
+				GPIO_BLINK_EN, orion5x_read(GPIO_BLINK_EN));
 	printk(KERN_DEBUG "GPIO_IN_POL (0x%08x) = 0x%08x\n",
-				GPIO_IN_POL, orion_read(GPIO_IN_POL));
+				GPIO_IN_POL, orion5x_read(GPIO_IN_POL));
 	printk(KERN_DEBUG "GPIO_DATA_IN (0x%08x) = 0x%08x\n",
-				GPIO_DATA_IN, orion_read(GPIO_DATA_IN));
+				GPIO_DATA_IN, orion5x_read(GPIO_DATA_IN));
 	printk(KERN_DEBUG "GPIO_LEVEL_MASK (0x%08x) = 0x%08x\n",
-				GPIO_LEVEL_MASK, orion_read(GPIO_LEVEL_MASK));
+				GPIO_LEVEL_MASK, orion5x_read(GPIO_LEVEL_MASK));
 	printk(KERN_DEBUG "GPIO_EDGE_CAUSE (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_CAUSE, orion_read(GPIO_EDGE_CAUSE));
+				GPIO_EDGE_CAUSE, orion5x_read(GPIO_EDGE_CAUSE));
 	printk(KERN_DEBUG "GPIO_EDGE_MASK (0x%08x) = 0x%08x\n",
-				GPIO_EDGE_MASK, orion_read(GPIO_EDGE_MASK));
+				GPIO_EDGE_MASK, orion5x_read(GPIO_EDGE_MASK));
 }
diff --git a/arch/arm/mach-orion/irq.c b/arch/arm/mach-orion5x/irq.c
index df7e12ad378b..dd21f38c5d37 100644
--- a/arch/arm/mach-orion/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -1,12 +1,12 @@
 /*
- * arch/arm/mach-orion/irq.c
+ * arch/arm/mach-orion5x/irq.c
  *
  * Core IRQ functions for Marvell Orion System On Chip
  *
  * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
  *
  * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
@@ -14,7 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/gpio.h>
-#include <asm/arch/orion.h>
+#include <asm/io.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/irq.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -42,46 +44,46 @@
  *        polarity    LEVEL          mask
  *
  ****************************************************************************/
-static void orion_gpio_irq_ack(u32 irq)
+static void orion5x_gpio_irq_ack(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
 	if (irq_desc[irq].status & IRQ_LEVEL)
 		/*
 		 * Mask bit for level interrupt
 		 */
-		orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+		orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
 	else
 		/*
 		 * Clear casue bit for egde interrupt
 		 */
-		orion_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
+		orion5x_clrbits(GPIO_EDGE_CAUSE, 1 << pin);
 }
 
-static void orion_gpio_irq_mask(u32 irq)
+static void orion5x_gpio_irq_mask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
 	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion_clrbits(GPIO_LEVEL_MASK, 1 << pin);
+		orion5x_clrbits(GPIO_LEVEL_MASK, 1 << pin);
 	else
-		orion_clrbits(GPIO_EDGE_MASK, 1 << pin);
+		orion5x_clrbits(GPIO_EDGE_MASK, 1 << pin);
 }
 
-static void orion_gpio_irq_unmask(u32 irq)
+static void orion5x_gpio_irq_unmask(u32 irq)
 {
 	int pin = irq_to_gpio(irq);
 	if (irq_desc[irq].status & IRQ_LEVEL)
-		orion_setbits(GPIO_LEVEL_MASK, 1 << pin);
+		orion5x_setbits(GPIO_LEVEL_MASK, 1 << pin);
 	else
-		orion_setbits(GPIO_EDGE_MASK, 1 << pin);
+		orion5x_setbits(GPIO_EDGE_MASK, 1 << pin);
 }
 
-static int orion_gpio_set_irq_type(u32 irq, u32 type)
+static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 {
 	int pin = irq_to_gpio(irq);
 	struct irq_desc *desc;
 
-	if ((orion_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
-		printk(KERN_ERR "orion_gpio_set_irq_type failed "
+	if ((orion5x_read(GPIO_IO_CONF) & (1 << pin)) == 0) {
+		printk(KERN_ERR "orion5x_gpio_set_irq_type failed "
 				"(irq %d, pin %d).\n", irq, pin);
 		return -EINVAL;
 	}
@@ -92,22 +94,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type)
 	case IRQT_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
-		orion_clrbits(GPIO_IN_POL, (1 << pin));
+		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
-		orion_setbits(GPIO_IN_POL, (1 << pin));
+		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
-		orion_clrbits(GPIO_IN_POL, (1 << pin));
+		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
-		orion_setbits(GPIO_IN_POL, (1 << pin));
+		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
 	case IRQT_BOTHEDGE:
 		desc->handle_irq = handle_edge_irq;
@@ -115,11 +117,11 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type)
 		/*
 		 * set initial polarity based on current input level
 		 */
-		if ((orion_read(GPIO_IN_POL) ^ orion_read(GPIO_DATA_IN))
+		if ((orion5x_read(GPIO_IN_POL) ^ orion5x_read(GPIO_DATA_IN))
 		    & (1 << pin))
-			orion_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
+			orion5x_setbits(GPIO_IN_POL, (1 << pin)); /* falling */
 		else
-			orion_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
+			orion5x_clrbits(GPIO_IN_POL, (1 << pin)); /* rising */
 
 		break;
 	default:
@@ -133,22 +135,22 @@ static int orion_gpio_set_irq_type(u32 irq, u32 type)
 	return 0;
 }
 
-static struct irq_chip orion_gpio_irq_chip = {
+static struct irq_chip orion5x_gpio_irq_chip = {
 	.name		= "Orion-IRQ-GPIO",
-	.ack		= orion_gpio_irq_ack,
-	.mask		= orion_gpio_irq_mask,
-	.unmask		= orion_gpio_irq_unmask,
-	.set_type	= orion_gpio_set_irq_type,
+	.ack		= orion5x_gpio_irq_ack,
+	.mask		= orion5x_gpio_irq_mask,
+	.unmask		= orion5x_gpio_irq_unmask,
+	.set_type	= orion5x_gpio_set_irq_type,
 };
 
-static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	u32 cause, offs, pin;
 
-	BUG_ON(irq < IRQ_ORION_GPIO_0_7 || irq > IRQ_ORION_GPIO_24_31);
-	offs = (irq - IRQ_ORION_GPIO_0_7) * 8;
-	cause = (orion_read(GPIO_DATA_IN) & orion_read(GPIO_LEVEL_MASK)) |
-		(orion_read(GPIO_EDGE_CAUSE) & orion_read(GPIO_EDGE_MASK));
+	BUG_ON(irq < IRQ_ORION5X_GPIO_0_7 || irq > IRQ_ORION5X_GPIO_24_31);
+	offs = (irq - IRQ_ORION5X_GPIO_0_7) * 8;
+	cause = (orion5x_read(GPIO_DATA_IN) & orion5x_read(GPIO_LEVEL_MASK)) |
+		(orion5x_read(GPIO_EDGE_CAUSE) & orion5x_read(GPIO_EDGE_MASK));
 
 	for (pin = offs; pin < offs + 8; pin++) {
 		if (cause & (1 << pin)) {
@@ -156,16 +158,16 @@ static void orion_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			desc = irq_desc + irq;
 			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
 				/* Swap polarity (race with GPIO line) */
-				u32 polarity = orion_read(GPIO_IN_POL);
+				u32 polarity = orion5x_read(GPIO_IN_POL);
 				polarity ^= 1 << pin;
-				orion_write(GPIO_IN_POL, polarity);
+				orion5x_write(GPIO_IN_POL, polarity);
 			}
 			desc_handle_irq(irq, desc);
 		}
 	}
 }
 
-static void __init orion_init_gpio_irq(void)
+static void __init orion5x_init_gpio_irq(void)
 {
 	int i;
 	struct irq_desc *desc;
@@ -173,69 +175,37 @@ static void __init orion_init_gpio_irq(void)
 	/*
 	 * Mask and clear GPIO IRQ interrupts
 	 */
-	orion_write(GPIO_LEVEL_MASK, 0x0);
-	orion_write(GPIO_EDGE_MASK, 0x0);
-	orion_write(GPIO_EDGE_CAUSE, 0x0);
+	orion5x_write(GPIO_LEVEL_MASK, 0x0);
+	orion5x_write(GPIO_EDGE_MASK, 0x0);
+	orion5x_write(GPIO_EDGE_CAUSE, 0x0);
 
 	/*
 	 * Register chained level handlers for GPIO IRQs by default.
 	 * User can use set_type() if he wants to use edge types handlers.
 	 */
-	for (i = IRQ_ORION_GPIO_START; i < NR_IRQS; i++) {
-		set_irq_chip(i, &orion_gpio_irq_chip);
+	for (i = IRQ_ORION5X_GPIO_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &orion5x_gpio_irq_chip);
 		set_irq_handler(i, handle_level_irq);
 		desc = irq_desc + i;
 		desc->status |= IRQ_LEVEL;
 		set_irq_flags(i, IRQF_VALID);
 	}
-	set_irq_chained_handler(IRQ_ORION_GPIO_0_7, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_8_15, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_16_23, orion_gpio_irq_handler);
-	set_irq_chained_handler(IRQ_ORION_GPIO_24_31, orion_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_0_7, orion5x_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_8_15, orion5x_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_16_23, orion5x_gpio_irq_handler);
+	set_irq_chained_handler(IRQ_ORION5X_GPIO_24_31, orion5x_gpio_irq_handler);
 }
 
 /*****************************************************************************
  * Orion Main IRQ
  ****************************************************************************/
-static void orion_main_irq_mask(u32 irq)
+static void __init orion5x_init_main_irq(void)
 {
-	orion_clrbits(MAIN_IRQ_MASK, 1 << irq);
+	orion_irq_init(0, (void __iomem *)MAIN_IRQ_MASK);
 }
 
-static void orion_main_irq_unmask(u32 irq)
+void __init orion5x_init_irq(void)
 {
-	orion_setbits(MAIN_IRQ_MASK, 1 << irq);
-}
-
-static struct irq_chip orion_main_irq_chip = {
-	.name		= "Orion-IRQ-Main",
-	.ack		= orion_main_irq_mask,
-	.mask		= orion_main_irq_mask,
-	.unmask		= orion_main_irq_unmask,
-};
-
-static void __init orion_init_main_irq(void)
-{
-	int i;
-
-	/*
-	 * Mask and clear Main IRQ interrupts
-	 */
-	orion_write(MAIN_IRQ_MASK, 0x0);
-	orion_write(MAIN_IRQ_CAUSE, 0x0);
-
-	/*
-	 * Register level handler for Main IRQs
-	 */
-	for (i = 0; i < IRQ_ORION_GPIO_START; i++) {
-		set_irq_chip(i, &orion_main_irq_chip);
-		set_irq_handler(i, handle_level_irq);
-		set_irq_flags(i, IRQF_VALID);
-	}
-}
-
-void __init orion_init_irq(void)
-{
-	orion_init_main_irq();
-	orion_init_gpio_irq();
+	orion5x_init_main_irq();
+	orion5x_init_gpio_irq();
 }
diff --git a/arch/arm/mach-orion/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 6817aca4aa26..91413455beba 100644
--- a/arch/arm/mach-orion/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -1,10 +1,10 @@
 /*
- * arch/arm/mach-orion/kurobox_pro-setup.c
+ * arch/arm/mach-orion5x/kurobox_pro-setup.c
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
  *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
@@ -22,8 +22,8 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/orion5x.h>
+#include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -123,8 +123,8 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCI isn't used on the Kuro
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 	else
 		printk(KERN_ERR "kurobox_pro_pci_map_irq failed, unknown bus\n");
 
@@ -134,8 +134,8 @@ static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 static struct hw_pci kurobox_pro_pci __initdata = {
 	.nr_controllers	= 1,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= kurobox_pro_pci_map_irq,
 };
 
@@ -178,31 +178,25 @@ static struct mv_sata_platform_data kurobox_pro_sata_data = {
  * General Setup
  ****************************************************************************/
 
-static struct platform_device *kurobox_pro_devices[] __initdata = {
-	&kurobox_pro_nor_flash,
-	&kurobox_pro_nand_flash,
-};
-
 static void __init kurobox_pro_init(void)
 {
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup the CPU address decode windows for our devices
 	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, KUROBOX_PRO_NOR_BOOT_BASE,
-				KUROBOX_PRO_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV0,	KUROBOX_PRO_NAND_BASE,
-				KUROBOX_PRO_NAND_SIZE, -1);
+	orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE,
+				KUROBOX_PRO_NOR_BOOT_SIZE);
+	orion5x_setup_dev0_win(KUROBOX_PRO_NAND_BASE, KUROBOX_PRO_NAND_SIZE);
+
 	/*
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins --
@@ -219,25 +213,44 @@ static void __init kurobox_pro_init(void)
 	 * MPP[15] SATA 1 active indication
 	 * MPP[16-19] Not used
 	 */
-	orion_write(MPP_0_7_CTRL, 0x44220003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x0);
+	orion5x_write(MPP_0_7_CTRL, 0x44220003);
+	orion5x_write(MPP_8_15_CTRL, 0x55550000);
+	orion5x_write(MPP_16_19_CTRL, 0x0);
 
-	orion_gpio_set_valid_pins(0x0000000c);
+	orion5x_gpio_set_valid_pins(0x0000000c);
 
-	platform_add_devices(kurobox_pro_devices, ARRAY_SIZE(kurobox_pro_devices));
+	platform_device_register(&kurobox_pro_nor_flash);
+	if (machine_is_kurobox_pro())
+		platform_device_register(&kurobox_pro_nand_flash);
 	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
-	orion_eth_init(&kurobox_pro_eth_data);
-	orion_sata_init(&kurobox_pro_sata_data);
+	orion5x_eth_init(&kurobox_pro_eth_data);
+	orion5x_sata_init(&kurobox_pro_sata_data);
 }
 
+#ifdef CONFIG_MACH_KUROBOX_PRO
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.boot_params	= 0x00000100,
+	.init_machine	= kurobox_pro_init,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_LINKSTATION_PRO
+MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
+	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= kurobox_pro_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
 MACHINE_END
+#endif
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
new file mode 100644
index 000000000000..fdf99fca85b3
--- /dev/null
+++ b/arch/arm/mach-orion5x/pci.c
@@ -0,0 +1,559 @@
+/*
+ * arch/arm/mach-orion5x/pci.c
+ *
+ * PCI and PCIe functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+#include "common.h"
+
+/*****************************************************************************
+ * Orion has one PCIe controller and one PCI controller.
+ *
+ * Note1: The local PCIe bus number is '0'. The local PCI bus number
+ * follows the scanned PCIe bridged busses, if any.
+ *
+ * Note2: It is possible for PCI/PCIe agents to access many subsystem's
+ * space, by configuring BARs and Address Decode Windows, e.g. flashes on
+ * device bus, Orion registers, etc. However this code only enable the
+ * access to DDR banks.
+ ****************************************************************************/
+
+
+/*****************************************************************************
+ * PCIe controller
+ ****************************************************************************/
+#define PCIE_BASE	((void __iomem *)ORION5X_PCIE_VIRT_BASE)
+
+void __init orion5x_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id(PCIE_BASE);
+	*rev = orion_pcie_rev(PCIE_BASE);
+}
+
+int __init orion5x_pcie_local_bus_nr(void)
+{
+	return orion_pcie_get_local_bus_nr(PCIE_BASE);
+}
+
+static int pcie_valid_config(int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access --
+	 * 1. nonexisting device on local bus
+	 * 2. where there's no device connected (no link)
+	 */
+	if (bus == 0 && dev == 0)
+		return 1;
+
+	if (!orion_pcie_link_up(PCIE_BASE))
+		return 0;
+
+	if (bus == 0 && dev != 1)
+		return 0;
+
+	return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion5x_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&orion5x_pcie_lock, flags);
+	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
+
+	return ret;
+}
+
+static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
+			   int where, int size, u32 *val)
+{
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/*
+	 * We only support access to the non-extended configuration
+	 * space when using the WA access method (or we would have to
+	 * sacrifice 256M of CPU virtual address space.)
+	 */
+	if (where >= 0x100) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	ret = orion_pcie_rd_conf_wa((void __iomem *)ORION5X_PCIE_WA_VIRT_BASE,
+				    bus, devfn, where, size, val);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&orion5x_pcie_lock, flags);
+	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+
+static int __init pcie_setup(struct pci_sys_data *sys)
+{
+	struct resource *res;
+	int dev;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_setup(PCIE_BASE, &orion5x_mbus_dram_info);
+
+	/*
+	 * Check whether to apply Orion-1/Orion-NAS PCIe config
+	 * read transaction workaround.
+	 */
+	dev = orion_pcie_dev_id(PCIE_BASE);
+	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
+		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
+				   "read transaction workaround\n");
+		pcie_ops.read = pcie_rd_conf_wa;
+	}
+
+	/*
+	 * Request resources.
+	 */
+	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	if (!res)
+		panic("pcie_setup unable to alloc resources");
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	res[0].name = "PCIe I/O Space";
+	res[0].flags = IORESOURCE_IO;
+	res[0].start = ORION5X_PCIE_IO_BUS_BASE;
+	res[0].end = res[0].start + ORION5X_PCIE_IO_SIZE - 1;
+	if (request_resource(&ioport_resource, &res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	res[1].name = "PCIe Memory Space";
+	res[1].flags = IORESOURCE_MEM;
+	res[1].start = ORION5X_PCIE_MEM_PHYS_BASE;
+	res[1].end = res[1].start + ORION5X_PCIE_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, &res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &res[1];
+
+	sys->resource[2] = NULL;
+	sys->io_offset = 0;
+
+	return 1;
+}
+
+/*****************************************************************************
+ * PCI controller
+ ****************************************************************************/
+#define PCI_MODE		ORION5X_PCI_REG(0xd00)
+#define PCI_CMD			ORION5X_PCI_REG(0xc00)
+#define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
+#define PCI_CONF_ADDR		ORION5X_PCI_REG(0xc78)
+#define PCI_CONF_DATA		ORION5X_PCI_REG(0xc7c)
+
+/*
+ * PCI_MODE bits
+ */
+#define PCI_MODE_64BIT			(1 << 2)
+#define PCI_MODE_PCIX			((1 << 4) | (1 << 5))
+
+/*
+ * PCI_CMD bits
+ */
+#define PCI_CMD_HOST_REORDER		(1 << 29)
+
+/*
+ * PCI_P2P_CONF bits
+ */
+#define PCI_P2P_BUS_OFFS		16
+#define PCI_P2P_BUS_MASK		(0xff << PCI_P2P_BUS_OFFS)
+#define PCI_P2P_DEV_OFFS		24
+#define PCI_P2P_DEV_MASK		(0x1f << PCI_P2P_DEV_OFFS)
+
+/*
+ * PCI_CONF_ADDR bits
+ */
+#define PCI_CONF_REG(reg)		((reg) & 0xfc)
+#define PCI_CONF_FUNC(func)		(((func) & 0x3) << 8)
+#define PCI_CONF_DEV(dev)		(((dev) & 0x1f) << 11)
+#define PCI_CONF_BUS(bus)		(((bus) & 0xff) << 16)
+#define PCI_CONF_ADDR_EN		(1 << 31)
+
+/*
+ * Internal configuration space
+ */
+#define PCI_CONF_FUNC_STAT_CMD		0
+#define PCI_CONF_REG_STAT_CMD		4
+#define PCIX_STAT			0x64
+#define PCIX_STAT_BUS_OFFS		8
+#define PCIX_STAT_BUS_MASK		(0xff << PCIX_STAT_BUS_OFFS)
+
+/*
+ * PCI Address Decode Windows registers
+ */
+#define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
+				((n) == 1) ? ORION5X_PCI_REG(0xd08) :  \
+				((n) == 2) ? ORION5X_PCI_REG(0xc0c) :  \
+				((n) == 3) ? ORION5X_PCI_REG(0xd0c) : 0)
+#define PCI_BAR_REMAP_DDR_CS(n)	(((n) ==0) ? ORION5X_PCI_REG(0xc48) :  \
+				((n) == 1) ? ORION5X_PCI_REG(0xd48) :  \
+				((n) == 2) ? ORION5X_PCI_REG(0xc4c) :  \
+				((n) == 3) ? ORION5X_PCI_REG(0xd4c) : 0)
+#define PCI_BAR_ENABLE		ORION5X_PCI_REG(0xc3c)
+#define PCI_ADDR_DECODE_CTRL	ORION5X_PCI_REG(0xd3c)
+
+/*
+ * PCI configuration helpers for BAR settings
+ */
+#define PCI_CONF_FUNC_BAR_CS(n)		((n) >> 1)
+#define PCI_CONF_REG_BAR_LO_CS(n)	(((n) & 1) ? 0x18 : 0x10)
+#define PCI_CONF_REG_BAR_HI_CS(n)	(((n) & 1) ? 0x1c : 0x14)
+
+/*
+ * PCI config cycles are done by programming the PCI_CONF_ADDR register
+ * and then reading the PCI_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion5x_pci_lock);
+
+int orion5x_pci_local_bus_nr(void)
+{
+	u32 conf = orion5x_read(PCI_P2P_CONF);
+	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
+}
+
+static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
+					u32 where, u32 size, u32 *val)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&orion5x_pci_lock, flags);
+
+	orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+	*val = orion5x_read(PCI_CONF_DATA);
+
+	if (size == 1)
+		*val = (*val >> (8*(where & 0x3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+	spin_unlock_irqrestore(&orion5x_pci_lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
+					u32 where, u32 size, u32 val)
+{
+	unsigned long flags;
+	int ret = PCIBIOS_SUCCESSFUL;
+
+	spin_lock_irqsave(&orion5x_pci_lock, flags);
+
+	orion5x_write(PCI_CONF_ADDR, PCI_CONF_BUS(bus) |
+			PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+			PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN);
+
+	if (size == 4) {
+		__raw_writel(val, PCI_CONF_DATA);
+	} else if (size == 2) {
+		__raw_writew(val, PCI_CONF_DATA + (where & 0x3));
+	} else if (size == 1) {
+		__raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
+	} else {
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	spin_unlock_irqrestore(&orion5x_pci_lock, flags);
+
+	return ret;
+}
+
+static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
+				int where, int size, u32 *val)
+{
+	/*
+	 * Don't go out for local device
+	 */
+	if (bus->number == orion5x_pci_local_bus_nr() &&
+	    PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
+					PCI_FUNC(devfn), where, size, val);
+}
+
+static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
+				int where, int size, u32 val)
+{
+	if (bus->number == orion5x_pci_local_bus_nr() &&
+	    PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
+					PCI_FUNC(devfn), where, size, val);
+}
+
+static struct pci_ops pci_ops = {
+	.read = orion5x_pci_rd_conf,
+	.write = orion5x_pci_wr_conf,
+};
+
+static void __init orion5x_pci_set_bus_nr(int nr)
+{
+	u32 p2p = orion5x_read(PCI_P2P_CONF);
+
+	if (orion5x_read(PCI_MODE) & PCI_MODE_PCIX) {
+		/*
+		 * PCI-X mode
+		 */
+		u32 pcix_status, bus, dev;
+		bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
+		dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
+		orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
+		pcix_status &= ~PCIX_STAT_BUS_MASK;
+		pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
+		orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
+	} else {
+		/*
+		 * PCI Conventional mode
+		 */
+		p2p &= ~PCI_P2P_BUS_MASK;
+		p2p |= (nr << PCI_P2P_BUS_OFFS);
+		orion5x_write(PCI_P2P_CONF, p2p);
+	}
+}
+
+static void __init orion5x_pci_master_slave_enable(void)
+{
+	int bus_nr, func, reg;
+	u32 val;
+
+	bus_nr = orion5x_pci_local_bus_nr();
+	func = PCI_CONF_FUNC_STAT_CMD;
+	reg = PCI_CONF_REG_STAT_CMD;
+	orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val);
+	val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
+}
+
+static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
+{
+	u32 win_enable;
+	int bus;
+	int i;
+
+	/*
+	 * First, disable windows.
+	 */
+	win_enable = 0xffffffff;
+	orion5x_write(PCI_BAR_ENABLE, win_enable);
+
+	/*
+	 * Setup windows for DDR banks.
+	 */
+	bus = orion5x_pci_local_bus_nr();
+
+	for (i = 0; i < dram->num_cs; i++) {
+		struct mbus_dram_window *cs = dram->cs + i;
+		u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
+		u32 reg;
+		u32 val;
+
+		/*
+		 * Write DRAM bank base address register.
+		 */
+		reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index);
+		orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val);
+		val = (cs->base & 0xfffff000) | (val & 0xfff);
+		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val);
+
+		/*
+		 * Write DRAM bank size register.
+		 */
+		reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
+		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
+		orion5x_write(PCI_BAR_SIZE_DDR_CS(cs->cs_index),
+				(cs->size - 1) & 0xfffff000);
+		orion5x_write(PCI_BAR_REMAP_DDR_CS(cs->cs_index),
+				cs->base & 0xfffff000);
+
+		/*
+		 * Enable decode window for this chip select.
+		 */
+		win_enable &= ~(1 << cs->cs_index);
+	}
+
+	/*
+	 * Re-enable decode windows.
+	 */
+	orion5x_write(PCI_BAR_ENABLE, win_enable);
+
+	/*
+	 * Disable automatic update of address remaping when writing to BARs.
+	 */
+	orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
+}
+
+static int __init pci_setup(struct pci_sys_data *sys)
+{
+	struct resource *res;
+
+	/*
+	 * Point PCI unit MBUS decode windows to DRAM space.
+	 */
+	orion5x_setup_pci_wins(&orion5x_mbus_dram_info);
+
+	/*
+	 * Master + Slave enable
+	 */
+	orion5x_pci_master_slave_enable();
+
+	/*
+	 * Force ordering
+	 */
+	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+
+	/*
+	 * Request resources
+	 */
+	res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
+	if (!res)
+		panic("pci_setup unable to alloc resources");
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	res[0].name = "PCI I/O Space";
+	res[0].flags = IORESOURCE_IO;
+	res[0].start = ORION5X_PCI_IO_BUS_BASE;
+	res[0].end = res[0].start + ORION5X_PCI_IO_SIZE - 1;
+	if (request_resource(&ioport_resource, &res[0]))
+		panic("Request PCI IO resource failed\n");
+	sys->resource[0] = &res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	res[1].name = "PCI Memory Space";
+	res[1].flags = IORESOURCE_MEM;
+	res[1].start = ORION5X_PCI_MEM_PHYS_BASE;
+	res[1].end = res[1].start + ORION5X_PCI_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, &res[1]))
+		panic("Request PCI Memory resource failed\n");
+	sys->resource[1] = &res[1];
+
+	sys->resource[2] = NULL;
+	sys->io_offset = 0;
+
+	return 1;
+}
+
+
+/*****************************************************************************
+ * General PCIe + PCI
+ ****************************************************************************/
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
+{
+	int ret = 0;
+
+	if (nr == 0) {
+		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
+		ret = pcie_setup(sys);
+	} else if (nr == 1) {
+		orion5x_pci_set_bus_nr(sys->busnr);
+		ret = pci_setup(sys);
+	}
+
+	return ret;
+}
+
+struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr == 0) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else if (nr == 1) {
+		bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
diff --git a/arch/arm/mach-orion/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index e851b8ca5ac6..37e8b2dc3ed5 100644
--- a/arch/arm/mach-orion/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -1,12 +1,12 @@
 /*
- * arch/arm/mach-orion/rd88f5182-setup.c
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
  *
  * Marvell Orion-NAS Reference Design Setup
  *
  * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
  *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
@@ -24,8 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -176,8 +175,8 @@ static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCI-E isn't used on the RD2
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -197,8 +196,8 @@ static struct hw_pci rd88f5182_pci __initdata = {
 	.nr_controllers	= 2,
 	.preinit	= rd88f5182_pci_preinit,
 	.swizzle	= pci_std_swizzle,
-	.setup		= orion_pci_sys_setup,
-	.scan		= orion_pci_sys_scan_bus,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
 	.map_irq	= rd88f5182_pci_map_irq,
 };
 
@@ -250,22 +249,20 @@ static void __init rd88f5182_init(void)
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup the CPU address decode windows for our devices
 	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, RD88F5182_NOR_BOOT_BASE,
-				RD88F5182_NOR_BOOT_SIZE, -1);
-	orion_setup_cpu_win(ORION_DEV1, RD88F5182_NOR_BASE,
-				RD88F5182_NOR_SIZE, -1);
+	orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE,
+				RD88F5182_NOR_BOOT_SIZE);
+	orion5x_setup_dev1_win(RD88F5182_NOR_BASE, RD88F5182_NOR_SIZE);
 
 	/*
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins --
@@ -291,25 +288,25 @@ static void __init rd88f5182_init(void)
 	 * MPP[25] USB 0 over current enable
 	 */
 
-	orion_write(MPP_0_7_CTRL, 0x00000003);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x5555);
+	orion5x_write(MPP_0_7_CTRL, 0x00000003);
+	orion5x_write(MPP_8_15_CTRL, 0x55550000);
+	orion5x_write(MPP_16_19_CTRL, 0x5555);
 
-	orion_gpio_set_valid_pins(0x000000fb);
+	orion5x_gpio_set_valid_pins(0x000000fb);
 
 	platform_add_devices(rd88f5182_devices, ARRAY_SIZE(rd88f5182_devices));
 	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
-	orion_eth_init(&rd88f5182_eth_data);
-	orion_sata_init(&rd88f5182_sata_data);
+	orion5x_eth_init(&rd88f5182_eth_data);
+	orion5x_sata_init(&rd88f5182_sata_data);
 }
 
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= rd88f5182_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
 MACHINE_END
diff --git a/arch/arm/mach-orion/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index b8cfe6813e9d..fd43863a86f6 100644
--- a/arch/arm/mach-orion/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,8 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion.h>
-#include <asm/arch/platform.h>
+#include <asm/arch/orion5x.h>
 #include "common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
@@ -145,8 +144,8 @@ static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIE IRQ is connected internally (not GPIO)
 	 */
-	if (dev->bus->number == orion_pcie_local_bus_nr())
-		return IRQ_ORION_PCIE0_INT;
+	if (dev->bus->number == orion5x_pcie_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
 
 	/*
 	 * PCI IRQs are connected via GPIOs
@@ -165,8 +164,8 @@ static struct hw_pci qnap_ts209_pci __initdata = {
 	.nr_controllers = 2,
 	.preinit        = qnap_ts209_pci_preinit,
 	.swizzle        = pci_std_swizzle,
-	.setup          = orion_pci_sys_setup,
-	.scan           = orion_pci_sys_scan_bus,
+	.setup          = orion5x_pci_sys_setup,
+	.scan           = orion5x_pci_sys_scan_bus,
 	.map_irq        = qnap_ts209_pci_map_irq,
 };
 
@@ -189,6 +188,87 @@ static struct mv643xx_eth_platform_data qnap_ts209_eth_data = {
 	.force_phy_addr = 1,
 };
 
+static int __init parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = parse_hex_nibble(b[0]);
+	lo = parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init check_mac_addr(const char *addr_str)
+{
+	u_int8_t addr[6];
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		int byte;
+
+		/*
+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+		 */
+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+			return -1;
+
+		byte = parse_hex_byte(addr_str + (i * 3));
+		if (byte < 0)
+			return -1;
+		addr[i] = byte;
+	}
+
+	printk(KERN_INFO "ts209: found ethernet mac address ");
+	for (i = 0; i < 6; i++)
+		printk("%.2x%s", addr[i], (i < 5) ? ":" : ".\n");
+
+	memcpy(qnap_ts209_eth_data.mac_addr, addr, 6);
+
+	return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n".)
+ */
+static void __init ts209_find_mac_addr(void)
+{
+	unsigned long addr;
+
+	for (addr = 0x00700000; addr < 0x00760000; addr += 1024) {
+		char *nor_page;
+		int ret = 0;
+
+		nor_page = ioremap(QNAP_TS209_NOR_BOOT_BASE + addr, 1024);
+		if (nor_page != NULL) {
+			ret = check_mac_addr(nor_page);
+			iounmap(nor_page);
+		}
+
+		if (ret == 0)
+			break;
+	}
+}
+
 /*****************************************************************************
  * RTC S35390A on I2C bus
  ****************************************************************************/
@@ -262,21 +342,21 @@ static struct platform_device *qnap_ts209_devices[] __initdata = {
 static void qnap_ts209_power_off(void)
 {
 	/* 19200 baud divisor */
-	const unsigned divisor = ((ORION_TCLK + (8 * 19200)) / (16 * 19200));
+	const unsigned divisor = ((ORION5X_TCLK + (8 * 19200)) / (16 * 19200));
 
 	pr_info("%s: triggering power-off...\n", __func__);
 
 	/* hijack uart1 and reset into sane state (19200,8n1) */
-	orion_write(UART1_REG(LCR), 0x83);
-	orion_write(UART1_REG(DLL), divisor & 0xff);
-	orion_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
-	orion_write(UART1_REG(LCR), 0x03);
-	orion_write(UART1_REG(IER), 0x00);
-	orion_write(UART1_REG(FCR), 0x00);
-	orion_write(UART1_REG(MCR), 0x00);
+	orion5x_write(UART1_REG(LCR), 0x83);
+	orion5x_write(UART1_REG(DLL), divisor & 0xff);
+	orion5x_write(UART1_REG(DLM), (divisor >> 8) & 0xff);
+	orion5x_write(UART1_REG(LCR), 0x03);
+	orion5x_write(UART1_REG(IER), 0x00);
+	orion5x_write(UART1_REG(FCR), 0x00);
+	orion5x_write(UART1_REG(MCR), 0x00);
 
 	/* send the power-off command 'A' to PIC */
-	orion_write(UART1_REG(TX), 'A');
+	orion5x_write(UART1_REG(TX), 'A');
 }
 
 static void __init qnap_ts209_init(void)
@@ -284,20 +364,19 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Setup basic Orion functions. Need to be called early.
 	 */
-	orion_init();
+	orion5x_init();
 
 	/*
 	 * Setup flash mapping
 	 */
-	orion_setup_cpu_win(ORION_DEV_BOOT, QNAP_TS209_NOR_BOOT_BASE,
-			    QNAP_TS209_NOR_BOOT_SIZE, -1);
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+			    QNAP_TS209_NOR_BOOT_SIZE);
 
 	/*
 	 * Open a special address decode windows for the PCIE WA.
 	 */
-	orion_write(ORION_REGS_VIRT_BASE | 0x20074, ORION_PCIE_WA_PHYS_BASE);
-	orion_write(ORION_REGS_VIRT_BASE | 0x20070, (0x7941 |
-		(((ORION_PCIE_WA_SIZE >> 16) - 1)) << 16));
+	orion5x_setup_pcie_wa_win(ORION5X_PCIE_WA_PHYS_BASE,
+				ORION5X_PCIE_WA_SIZE);
 
 	/*
 	 * Setup Multiplexing Pins --
@@ -322,10 +401,10 @@ static void __init qnap_ts209_init(void)
 	 * MPP[22] USB 0 over current
 	 * MPP[23-25] Reserved
 	 */
-	orion_write(MPP_0_7_CTRL, 0x3);
-	orion_write(MPP_8_15_CTRL, 0x55550000);
-	orion_write(MPP_16_19_CTRL, 0x5500);
-	orion_gpio_set_valid_pins(0x3cc0fff);
+	orion5x_write(MPP_0_7_CTRL, 0x3);
+	orion5x_write(MPP_8_15_CTRL, 0x55550000);
+	orion5x_write(MPP_16_19_CTRL, 0x5500);
+	orion5x_gpio_set_valid_pins(0x3cc0fff);
 
 	/* register ts209 specific power-off method */
 	pm_power_off = qnap_ts209_power_off;
@@ -344,17 +423,20 @@ static void __init qnap_ts209_init(void)
 		pr_warning("qnap_ts209_init: failed to get RTC IRQ\n");
 	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
 
-	orion_eth_init(&qnap_ts209_eth_data);
-	orion_sata_init(&qnap_ts209_sata_data);
+	ts209_find_mac_addr();
+	orion5x_eth_init(&qnap_ts209_eth_data);
+
+	orion5x_sata_init(&qnap_ts209_sata_data);
 }
 
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer:  Byron Bradley <byron.bbradley@gmail.com> */
-	.phys_io	= ORION_REGS_PHYS_BASE,
-	.io_pg_offst	= ((ORION_REGS_VIRT_BASE) >> 18) & 0xFFFC,
+	.phys_io	= ORION5X_REGS_PHYS_BASE,
+	.io_pg_offst	= ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
 	.boot_params	= 0x00000100,
 	.init_machine	= qnap_ts209_init,
-	.map_io		= orion_map_io,
-	.init_irq	= orion_init_irq,
-	.timer		= &orion_timer,
+	.map_io		= orion5x_map_io,
+	.init_irq	= orion5x_init_irq,
+	.timer		= &orion5x_timer,
+	.fixup		= tag_fixup_mem32,
 MACHINE_END
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index daa8d3d98eff..a5268c3ac5a7 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,7 +21,6 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/semaphore.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 
@@ -976,7 +975,7 @@ static int __init clk_init(void)
 				(*clkp)->set_parent((*clkp), (*clkp)->parent);
 		}
 		pr_debug("%s: clock %s, rate %ld\n",
-			__FUNCTION__, (*clkp)->name, (*clkp)->rate);
+			__func__, (*clkp)->name, (*clkp)->rate);
 	}
 
 	local_clk_use(&ck_pll4);
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index f7009d845be8..fe152e82590b 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -192,7 +192,7 @@ void pnx4008_free_channel(int ch)
 	if (!dma_channels[ch].name) {
 		printk(KERN_CRIT
 		       "%s: trying to free channel %d which is already freed\n",
-		       __FUNCTION__, ch);
+		       __func__, ch);
 		return;
 	}
 
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index 1ab84ced7b5a..ef179cab80e2 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -17,7 +17,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/semaphore.h>
 #include <asm/io.h>
 #include <asm/arch/platform.h>
 #include <asm/arch/gpio.h>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 0908bea0f609..5da7a6820492 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -23,6 +23,12 @@ endif
 choice
 	prompt "Select target board"
 
+config ARCH_GUMSTIX
+	bool "Gumstix XScale boards"
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Gumstix Full Function Minature Computer.
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -160,6 +166,20 @@ endchoice
 
 endif
 
+if ARCH_GUMSTIX
+
+choice
+	prompt "Select target Gumstix board"
+
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	select PXA25x
+
+endchoice
+
+endif
+
+
 if MACH_TRIZEPS4
 
 choice
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 6e0c4f5b5ae6..7cdcb459ea9d 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -5,13 +5,14 @@
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
 				   time.o gpio.o
-obj-$(CONFIG_PXA25x)		+= pxa25x.o
-obj-$(CONFIG_PXA27x)		+= pxa27x.o
-obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp.o smemc.o
+obj-$(CONFIG_PXA25x)		+= pxa25x.o mfp-pxa2xx.o
+obj-$(CONFIG_PXA27x)		+= pxa27x.o mfp-pxa2xx.o
+obj-$(CONFIG_PXA3xx)		+= pxa3xx.o mfp-pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 
 # Specific board support
+obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index df5ae2710ab1..e97dc59813c8 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -13,6 +13,7 @@
 #include <linux/delay.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/hardware.h>
 
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 15c4e0df3e10..ac7f05f9f3eb 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -23,6 +23,7 @@
 #include <asm/mach/pci.h>
 #include <asm/arch/cm-x270.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
@@ -104,7 +105,7 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
-	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __FUNCTION__, slot, pin);
+	dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
 
 	irq = it8152_pci_map_irq(dev, slot, pin);
 	if (irq)
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6012177a29a3..6d4416a4f378 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -30,6 +30,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
@@ -504,11 +505,11 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: on\n", __func__);
 		GPCR(105) = GPIO_bit(105);
 	} else {
 		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: off\n", __func__);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 6db54e31c397..43bf5a183e90 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -29,6 +29,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/colibri.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 9292576b83b3..259ca821e464 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -36,6 +36,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 392c38717362..0a85f706e887 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/corgi.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 31706224a04c..eccc45d21f75 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -21,6 +21,7 @@
 
 #include <asm/arch/ssp.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/regs-ssp.h>
 #include "sharpsl.h"
 
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index bfccb80ac8ef..d6c05b6eab35 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -11,6 +11,8 @@
 #include <asm/arch/irda.h>
 #include <asm/arch/i2c.h>
 #include <asm/arch/ohci.h>
+#include <asm/arch/pxa27x_keypad.h>
+#include <asm/arch/camera.h>
 
 #include "devices.h"
 
@@ -396,6 +398,31 @@ struct platform_device pxa25x_device_assp = {
 
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
 
+static struct resource pxa27x_resource_keypad[] = {
+	[0] = {
+		.start	= 0x41500000,
+		.end	= 0x4150004c,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_KEYPAD,
+		.end	= IRQ_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa27x_device_keypad = {
+	.name		= "pxa27x-keypad",
+	.id		= -1,
+	.resource	= pxa27x_resource_keypad,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_keypad),
+};
+
+void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_keypad, info);
+}
+
 static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa27x_resource_ohci[] = {
@@ -540,6 +567,37 @@ struct platform_device pxa27x_device_ssp3 = {
 	.resource	= pxa27x_resource_ssp3,
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
 };
+
+static struct resource pxa27x_resource_camera[] = {
+	[0] = {
+		.start	= 0x50000000,
+		.end	= 0x50000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_CAMERA,
+		.end	= IRQ_CAMERA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
+
+static struct platform_device pxa27x_device_camera = {
+	.name		= "pxa27x-camera",
+	.id		= 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask      		= &pxa27x_dma_mask_camera,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_camera),
+	.resource	= pxa27x_resource_camera,
+};
+
+void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
+{
+	pxa_register_device(&pxa27x_device_camera, info);
+}
 #endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
 
 #ifdef CONFIG_PXA3xx
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 96c7c8909068..fcab017f27ee 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -14,6 +14,7 @@ extern struct platform_device pxa_device_rtc;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
+extern struct platform_device pxa27x_device_keypad;
 
 extern struct platform_device pxa25x_device_ssp;
 extern struct platform_device pxa25x_device_nssp;
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 93c4f31f127f..3215316d7b06 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -81,7 +81,7 @@ void pxa_free_dma (int dma_ch)
 	if (!dma_channels[dma_ch].name) {
 		printk (KERN_CRIT
 			"%s: trying to free channel %d which is already freed\n",
-			__FUNCTION__, dma_ch);
+			__func__, dma_ch);
 		return;
 	}
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3d0ad5065ee5..edc4f07a230d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -23,6 +23,7 @@
 #include <asm/mach/arch.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/mmc.h>
@@ -264,7 +265,7 @@ static int em_x270_mci_init(struct device *dev,
 			  "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
-		       __FUNCTION__, err);
+		       __func__, err);
 		return err;
 	}
 
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 80721c610d41..331f29b2d0cd 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -19,14 +19,8 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <linux/string.h>
-#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
-#include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -134,59 +128,3 @@ void __init pxa_map_io(void)
 	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
 	get_clk_frequency_khz(1);
 }
-
-#ifdef CONFIG_PM
-
-static unsigned long saved_gplr[4];
-static unsigned long saved_gpdr[4];
-static unsigned long saved_grer[4];
-static unsigned long saved_gfer[4];
-
-static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
-{
-	int i, gpio;
-
-	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
-		saved_gplr[i] = GPLR(gpio);
-		saved_gpdr[i] = GPDR(gpio);
-		saved_grer[i] = GRER(gpio);
-		saved_gfer[i] = GFER(gpio);
-
-		/* Clear GPIO transition detect bits */
-		GEDR(gpio) = GEDR(gpio);
-	}
-	return 0;
-}
-
-static int pxa_gpio_resume(struct sys_device *dev)
-{
-	int i, gpio;
-
-	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
-		/* restore level with set/clear */
-		GPSR(gpio) = saved_gplr[i];
-		GPCR(gpio) = ~saved_gplr[i];
-
-		GRER(gpio) = saved_grer[i];
-		GFER(gpio) = saved_gfer[i];
-		GPDR(gpio) = saved_gpdr[i];
-	}
-	return 0;
-}
-#else
-#define pxa_gpio_suspend	NULL
-#define pxa_gpio_resume		NULL
-#endif
-
-struct sysdev_class pxa_gpio_sysclass = {
-	.name		= "gpio",
-	.suspend	= pxa_gpio_suspend,
-	.resume		= pxa_gpio_resume,
-};
-
-static int __init pxa_gpio_init(void)
-{
-	return sysdev_class_register(&pxa_gpio_sysclass);
-}
-
-core_initcall(pxa_gpio_init);
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index b3d10b0e52a0..5bb7ae757831 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -9,14 +9,13 @@
  * published by the Free Software Foundation.
  */
 
+typedef int (*set_wake_t)(unsigned int, unsigned int);
+
 struct sys_timer;
 
 extern struct sys_timer pxa_timer;
-extern void __init pxa_init_irq_low(void);
-extern void __init pxa_init_irq_high(void);
-extern void __init pxa_init_irq_gpio(int gpio_nr);
-extern void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int));
-extern void __init pxa_init_gpio(int gpio_nr);
+extern void __init pxa_init_irq(int irq_nr, set_wake_t fn);
+extern void __init pxa_init_gpio(int gpio_nr, set_wake_t fn);
 extern void __init pxa25x_init_irq(void);
 extern void __init pxa27x_init_irq(void);
 extern void __init pxa3xx_init_irq(void);
@@ -30,6 +29,8 @@ extern int pxa_last_gpio;
 	mi->bank[__nr].size = (__size), \
 	mi->bank[__nr].node = (((unsigned)(__start) - PHYS_OFFSET) >> 27)
 
+#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+
 #ifdef CONFIG_PXA25x
 extern unsigned pxa25x_get_clk_frequency_khz(int);
 extern unsigned pxa25x_get_memclk_frequency_10khz(void);
@@ -56,3 +57,4 @@ extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
 
 extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
+extern struct sysdev_class pxa3xx_mfp_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 8638dd7dd076..7d3e16970be0 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -14,11 +14,14 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/sysdev.h>
 
 #include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -129,69 +132,283 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 		__raw_writel(mask, pxa->regbase + GPCR_OFFSET);
 }
 
+#define GPIO_CHIP(_n)							\
+	[_n] = {							\
+		.regbase = GPIO##_n##_BASE,				\
+		.chip = {						\
+			.label		  = "gpio-" #_n,		\
+			.direction_input  = pxa_gpio_direction_input,	\
+			.direction_output = pxa_gpio_direction_output,	\
+			.get		  = pxa_gpio_get,		\
+			.set		  = pxa_gpio_set,		\
+			.base		  = (_n) * 32,			\
+			.ngpio		  = 32,				\
+		},							\
+	}
+
 static struct pxa_gpio_chip pxa_gpio_chip[] = {
-	[0] = {
-		.regbase = GPIO0_BASE,
-		.chip = {
-			.label            = "gpio-0",
-			.direction_input  = pxa_gpio_direction_input,
-			.direction_output = pxa_gpio_direction_output,
-			.get              = pxa_gpio_get,
-			.set              = pxa_gpio_set,
-			.base             = 0,
-			.ngpio            = 32,
-		},
-	},
-	[1] = {
-		.regbase = GPIO1_BASE,
-		.chip = {
-			.label            = "gpio-1",
-			.direction_input  = pxa_gpio_direction_input,
-			.direction_output = pxa_gpio_direction_output,
-			.get              = pxa_gpio_get,
-			.set              = pxa_gpio_set,
-			.base             = 32,
-			.ngpio            = 32,
-		},
-	},
-	[2] = {
-		.regbase = GPIO2_BASE,
-		.chip = {
-			.label            = "gpio-2",
-			.direction_input  = pxa_gpio_direction_input,
-			.direction_output = pxa_gpio_direction_output,
-			.get              = pxa_gpio_get,
-			.set              = pxa_gpio_set,
-			.base             = 64,
-			.ngpio            = 32, /* 21 for PXA25x */
-		},
-	},
+	GPIO_CHIP(0),
+	GPIO_CHIP(1),
+	GPIO_CHIP(2),
 #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-	[3] = {
-		.regbase = GPIO3_BASE,
-		.chip = {
-			.label            = "gpio-3",
-			.direction_input  = pxa_gpio_direction_input,
-			.direction_output = pxa_gpio_direction_output,
-			.get              = pxa_gpio_get,
-			.set              = pxa_gpio_set,
-			.base             = 96,
-			.ngpio            = 32,
-		},
-	},
+	GPIO_CHIP(3),
 #endif
 };
 
-void __init pxa_init_gpio(int gpio_nr)
+/*
+ * PXA GPIO edge detection for IRQs:
+ * IRQs are generated on Falling-Edge, Rising-Edge, or both.
+ * Use this instead of directly setting GRER/GFER.
+ */
+
+static unsigned long GPIO_IRQ_rising_edge[4];
+static unsigned long GPIO_IRQ_falling_edge[4];
+static unsigned long GPIO_IRQ_mask[4];
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static int __gpio_is_occupied(unsigned gpio)
+{
+	if (cpu_is_pxa25x() || cpu_is_pxa27x())
+		return GAFR(gpio) & (0x3 << (((gpio) & 0xf) * 2));
+	else
+		return 0;
+}
+
+static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+	int gpio, idx;
+
+	gpio = IRQ_TO_GPIO(irq);
+	idx = gpio >> 5;
+
+	if (type == IRQ_TYPE_PROBE) {
+		/* Don't mess with enabled GPIOs using preconfigured edges or
+		 * GPIOs set to alternate function or to output during probe
+		 */
+		if ((GPIO_IRQ_rising_edge[idx] |
+		     GPIO_IRQ_falling_edge[idx] |
+		     GPDR(gpio)) & GPIO_bit(gpio))
+			return 0;
+
+		if (__gpio_is_occupied(gpio))
+			return 0;
+
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+	}
+
+	GPDR(gpio) &= ~GPIO_bit(gpio);
+
+	if (type & IRQ_TYPE_EDGE_RISING)
+		__set_bit(gpio, GPIO_IRQ_rising_edge);
+	else
+		__clear_bit(gpio, GPIO_IRQ_rising_edge);
+
+	if (type & IRQ_TYPE_EDGE_FALLING)
+		__set_bit(gpio, GPIO_IRQ_falling_edge);
+	else
+		__clear_bit(gpio, GPIO_IRQ_falling_edge);
+
+	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
+	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+
+	pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
+		((type & IRQ_TYPE_EDGE_RISING)  ? " rising"  : ""),
+		((type & IRQ_TYPE_EDGE_FALLING) ? " falling" : ""));
+	return 0;
+}
+
+/*
+ * GPIO IRQs must be acknowledged.  This is for GPIO 0 and 1.
+ */
+
+static void pxa_ack_low_gpio(unsigned int irq)
+{
+	GEDR0 = (1 << (irq - IRQ_GPIO0));
+}
+
+static void pxa_mask_low_gpio(unsigned int irq)
+{
+	ICMR &= ~(1 << (irq - PXA_IRQ(0)));
+}
+
+static void pxa_unmask_low_gpio(unsigned int irq)
+{
+	ICMR |= 1 << (irq - PXA_IRQ(0));
+}
+
+static struct irq_chip pxa_low_gpio_chip = {
+	.name		= "GPIO-l",
+	.ack		= pxa_ack_low_gpio,
+	.mask		= pxa_mask_low_gpio,
+	.unmask		= pxa_unmask_low_gpio,
+	.set_type	= pxa_gpio_irq_type,
+};
+
+/*
+ * Demux handler for GPIO>=2 edge detect interrupts
+ */
+
+#define GEDR_BITS	(sizeof(gedr) * BITS_PER_BYTE)
+
+static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int loop, bit, n;
+	unsigned long gedr[4];
+
+	do {
+		gedr[0] = GEDR0 & GPIO_IRQ_mask[0] & ~3;
+		gedr[1] = GEDR1 & GPIO_IRQ_mask[1];
+		gedr[2] = GEDR2 & GPIO_IRQ_mask[2];
+		gedr[3] = GEDR3 & GPIO_IRQ_mask[3];
+
+		GEDR0 = gedr[0]; GEDR1 = gedr[1];
+		GEDR2 = gedr[2]; GEDR3 = gedr[3];
+
+		loop = 0;
+		bit = find_first_bit(gedr, GEDR_BITS);
+		while (bit < GEDR_BITS) {
+			loop = 1;
+
+			n = PXA_GPIO_IRQ_BASE + bit;
+			desc_handle_irq(n, irq_desc + n);
+
+			bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
+		}
+	} while (loop);
+}
+
+static void pxa_ack_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq - IRQ_GPIO(2) + 2;
+	GEDR(gpio) = GPIO_bit(gpio);
+}
+
+static void pxa_mask_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq - IRQ_GPIO(2) + 2;
+	__clear_bit(gpio, GPIO_IRQ_mask);
+	GRER(gpio) &= ~GPIO_bit(gpio);
+	GFER(gpio) &= ~GPIO_bit(gpio);
+}
+
+static void pxa_unmask_muxed_gpio(unsigned int irq)
+{
+	int gpio = irq - IRQ_GPIO(2) + 2;
+	int idx = gpio >> 5;
+	__set_bit(gpio, GPIO_IRQ_mask);
+	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
+	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
+}
+
+static struct irq_chip pxa_muxed_gpio_chip = {
+	.name		= "GPIO",
+	.ack		= pxa_ack_muxed_gpio,
+	.mask		= pxa_mask_muxed_gpio,
+	.unmask		= pxa_unmask_muxed_gpio,
+	.set_type	= pxa_gpio_irq_type,
+};
+
+void __init pxa_init_gpio(int gpio_nr, set_wake_t fn)
 {
-	int i;
+	int irq, i, gpio;
+
+	pxa_last_gpio = gpio_nr - 1;
+
+	/* clear all GPIO edge detects */
+	for (i = 0; i < gpio_nr; i += 32) {
+		GFER(i) = 0;
+		GRER(i) = 0;
+		GEDR(i) = GEDR(i);
+	}
+
+	/* GPIO 0 and 1 must have their mask bit always set */
+	GPIO_IRQ_mask[0] = 3;
+
+	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
+		set_irq_chip(irq, &pxa_low_gpio_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
+		set_irq_chip(irq, &pxa_muxed_gpio_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	/* Install handler for GPIO>=2 edge detect interrupts */
+	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
+
+	pxa_low_gpio_chip.set_wake = fn;
+	pxa_muxed_gpio_chip.set_wake = fn;
 
 	/* add a GPIO chip for each register bank.
 	 * the last PXA25x register only contains 21 GPIOs
 	 */
-	for (i = 0; i < gpio_nr; i += 32) {
-		if (i+32 > gpio_nr)
-			pxa_gpio_chip[i/32].chip.ngpio = gpio_nr - i;
-		gpiochip_add(&pxa_gpio_chip[i/32].chip);
+	for (gpio = 0, i = 0; gpio < gpio_nr; gpio += 32, i++) {
+		if (gpio + 32 > gpio_nr)
+			pxa_gpio_chip[i].chip.ngpio = gpio_nr - gpio;
+		gpiochip_add(&pxa_gpio_chip[i].chip);
 	}
 }
+
+#ifdef CONFIG_PM
+
+static unsigned long saved_gplr[4];
+static unsigned long saved_gpdr[4];
+static unsigned long saved_grer[4];
+static unsigned long saved_gfer[4];
+
+static int pxa_gpio_suspend(struct sys_device *dev, pm_message_t state)
+{
+	int i, gpio;
+
+	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+		saved_gplr[i] = GPLR(gpio);
+		saved_gpdr[i] = GPDR(gpio);
+		saved_grer[i] = GRER(gpio);
+		saved_gfer[i] = GFER(gpio);
+
+		/* Clear GPIO transition detect bits */
+		GEDR(gpio) = GEDR(gpio);
+	}
+	return 0;
+}
+
+static int pxa_gpio_resume(struct sys_device *dev)
+{
+	int i, gpio;
+
+	for (gpio = 0, i = 0; gpio < pxa_last_gpio; gpio += 32, i++) {
+		/* restore level with set/clear */
+		GPSR(gpio) = saved_gplr[i];
+		GPCR(gpio) = ~saved_gplr[i];
+
+		GRER(gpio) = saved_grer[i];
+		GFER(gpio) = saved_gfer[i];
+		GPDR(gpio) = saved_gpdr[i];
+	}
+	return 0;
+}
+#else
+#define pxa_gpio_suspend	NULL
+#define pxa_gpio_resume		NULL
+#endif
+
+struct sysdev_class pxa_gpio_sysclass = {
+	.name		= "gpio",
+	.suspend	= pxa_gpio_suspend,
+	.resume		= pxa_gpio_resume,
+};
+
+static int __init pxa_gpio_init(void)
+{
+	return sysdev_class_register(&pxa_gpio_sysclass);
+}
+
+core_initcall(pxa_gpio_init);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
new file mode 100644
index 000000000000..f01d18544133
--- /dev/null
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -0,0 +1,147 @@
+/*
+ *  linux/arch/arm/mach-pxa/gumstix.c
+ *
+ *  Support for the Gumstix motherboards.
+ *
+ *  Original Author:	Craig Hughes
+ *  Created:	Feb 14, 2008
+ *  Copyright:	Craig Hughes
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ *  Implemented based on lubbock.c by Nicolas Pitre and code from Craig
+ *  Hughes
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/udc.h>
+#include <asm/arch/gumstix.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-regs.h>
+
+#include "generic.h"
+
+static struct resource flash_resource = {
+	.start	= 0x00000000,
+	.end	= SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition gumstix_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name =		"rootfs",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	MTDPART_OFS_APPEND
+	}
+};
+
+static struct flash_platform_data gumstix_flash_data = {
+	.map_name	= "cfi_probe",
+	.parts		= gumstix_partitions,
+	.nr_parts	= ARRAY_SIZE(gumstix_partitions),
+	.width		= 2,
+};
+
+static struct platform_device gumstix_flash_device = {
+	.name		= "pxa2xx-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &gumstix_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&gumstix_flash_device,
+};
+
+#ifdef CONFIG_MMC_PXA
+static struct pxamci_platform_data gumstix_mci_platform_data;
+
+static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int,
+				void *data)
+{
+	pxa_gpio_mode(GPIO6_MMCCLK_MD);
+	pxa_gpio_mode(GPIO53_MMCCLK_MD);
+	pxa_gpio_mode(GPIO8_MMCCS0_MD);
+
+	return 0;
+}
+
+static struct pxamci_platform_data gumstix_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init		= gumstix_mci_init,
+};
+
+static void __init gumstix_mmc_init(void)
+{
+	pxa_set_mci_info(&gumstix_mci_platform_data);
+}
+#else
+static void __init gumstix_mmc_init(void)
+{
+	printk(KERN_INFO "Gumstix mmc disabled\n");
+}
+#endif
+
+#ifdef CONFIG_USB_GADGET_PXA2XX
+static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
+	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
+};
+
+static void __init gumstix_udc_init(void)
+{
+	pxa_set_udc_info(&gumstix_udc_info);
+}
+#else
+static void gumstix_udc_init(void)
+{
+	printk(KERN_INFO "Gumstix udc is disabled\n");
+}
+#endif
+
+static void __init gumstix_init(void)
+{
+	gumstix_udc_init();
+	gumstix_mmc_init();
+	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(GUMSTIX, "Gumstix")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100, /* match u-boot bi_boot_params */
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= gumstix_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 0a9434432c55..2637633f9166 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -32,6 +32,7 @@
 #include <asm/mach/map.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/idp.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/bitfield.h>
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 36c6a68beca2..a9a0c3fab159 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-pxa/irq.c
  *
- *  Generic PXA IRQ handling, GPIO IRQ demultiplexing, etc.
+ *  Generic PXA IRQ handling
  *
  *  Author:	Nicolas Pitre
  *  Created:	Jun 15, 2001
@@ -21,308 +21,58 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 
 #include "generic.h"
 
+#define IRQ_BIT(n)	(((n) - PXA_IRQ(0)) & 0x1f)
+#define _ICMR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR))
+#define _ICLR(n)	(*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR))
 
 /*
  * This is for peripheral IRQs internal to the PXA chip.
  */
 
-static void pxa_mask_low_irq(unsigned int irq)
+static int pxa_internal_irq_nr;
+
+static void pxa_mask_irq(unsigned int irq)
 {
-	ICMR &= ~(1 << irq);
+	_ICMR(irq) &= ~(1 << IRQ_BIT(irq));
 }
 
-static void pxa_unmask_low_irq(unsigned int irq)
+static void pxa_unmask_irq(unsigned int irq)
 {
-	ICMR |= (1 << irq);
+	_ICMR(irq) |= 1 << IRQ_BIT(irq);
 }
 
-static struct irq_chip pxa_internal_chip_low = {
+static struct irq_chip pxa_internal_irq_chip = {
 	.name		= "SC",
-	.ack		= pxa_mask_low_irq,
-	.mask		= pxa_mask_low_irq,
-	.unmask		= pxa_unmask_low_irq,
+	.ack		= pxa_mask_irq,
+	.mask		= pxa_mask_irq,
+	.unmask		= pxa_unmask_irq,
 };
 
-void __init pxa_init_irq_low(void)
+void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
 	int irq;
 
-	/* disable all IRQs */
-	ICMR = 0;
+	pxa_internal_irq_nr = irq_nr;
 
-	/* all IRQs are IRQ, not FIQ */
-	ICLR = 0;
+	for (irq = 0; irq < irq_nr; irq += 32) {
+		_ICMR(irq) = 0;	/* disable all IRQs */
+		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
+	}
 
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
 
-	for (irq = PXA_IRQ(0); irq <= PXA_IRQ(31); irq++) {
-		set_irq_chip(irq, &pxa_internal_chip_low);
-		set_irq_handler(irq, handle_level_irq);
-		set_irq_flags(irq, IRQF_VALID);
-	}
-}
-
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-
-/*
- * This is for the second set of internal IRQs as found on the PXA27x.
- */
-
-static void pxa_mask_high_irq(unsigned int irq)
-{
-	ICMR2 &= ~(1 << (irq - 32));
-}
-
-static void pxa_unmask_high_irq(unsigned int irq)
-{
-	ICMR2 |= (1 << (irq - 32));
-}
-
-static struct irq_chip pxa_internal_chip_high = {
-	.name		= "SC-hi",
-	.ack		= pxa_mask_high_irq,
-	.mask		= pxa_mask_high_irq,
-	.unmask		= pxa_unmask_high_irq,
-};
-
-void __init pxa_init_irq_high(void)
-{
-	int irq;
-
-	ICMR2 = 0;
-	ICLR2 = 0;
-
-	for (irq = PXA_IRQ(32); irq < PXA_IRQ(64); irq++) {
-		set_irq_chip(irq, &pxa_internal_chip_high);
+	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq++) {
+		set_irq_chip(irq, &pxa_internal_irq_chip);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
-}
-#endif
-
-/*
- * PXA GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-
-static long GPIO_IRQ_rising_edge[4];
-static long GPIO_IRQ_falling_edge[4];
-static long GPIO_IRQ_mask[4];
-
-static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
-{
-	int gpio, idx;
-
-	gpio = IRQ_TO_GPIO(irq);
-	idx = gpio >> 5;
-
-	if (type == IRQT_PROBE) {
-	    /* Don't mess with enabled GPIOs using preconfigured edges or
-	       GPIOs set to alternate function or to output during probe */
-		if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) &
-		    GPIO_bit(gpio))
-			return 0;
-		if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
-	}
-
-	/* printk(KERN_DEBUG "IRQ%d (GPIO%d): ", irq, gpio); */
-
-	pxa_gpio_mode(gpio | GPIO_IN);
-
-	if (type & __IRQT_RISEDGE) {
-		/* printk("rising "); */
-		__set_bit (gpio, GPIO_IRQ_rising_edge);
-	} else {
-		__clear_bit (gpio, GPIO_IRQ_rising_edge);
-	}
-
-	if (type & __IRQT_FALEDGE) {
-		/* printk("falling "); */
-		__set_bit (gpio, GPIO_IRQ_falling_edge);
-	} else {
-		__clear_bit (gpio, GPIO_IRQ_falling_edge);
-	}
-
-	/* printk("edges\n"); */
-
-	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
-	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-	return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.  This is for GPIO 0 and 1.
- */
-
-static void pxa_ack_low_gpio(unsigned int irq)
-{
-	GEDR0 = (1 << (irq - IRQ_GPIO0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
-	.name		= "GPIO-l",
-	.ack		= pxa_ack_low_gpio,
-	.mask		= pxa_mask_low_irq,
-	.unmask		= pxa_unmask_low_irq,
-	.set_type	= pxa_gpio_irq_type,
-};
-
-/*
- * Demux handler for GPIO>=2 edge detect interrupts
- */
-
-static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int mask;
-	int loop;
-
-	do {
-		loop = 0;
-
-		mask = GEDR0 & GPIO_IRQ_mask[0] & ~3;
-		if (mask) {
-			GEDR0 = mask;
-			irq = IRQ_GPIO(2);
-			desc = irq_desc + irq;
-			mask >>= 2;
-			do {
-				if (mask & 1)
-					desc_handle_irq(irq, desc);
-				irq++;
-				desc++;
-				mask >>= 1;
-			} while (mask);
-			loop = 1;
-		}
-
-		mask = GEDR1 & GPIO_IRQ_mask[1];
-		if (mask) {
-			GEDR1 = mask;
-			irq = IRQ_GPIO(32);
-			desc = irq_desc + irq;
-			do {
-				if (mask & 1)
-					desc_handle_irq(irq, desc);
-				irq++;
-				desc++;
-				mask >>= 1;
-			} while (mask);
-			loop = 1;
-		}
-
-		mask = GEDR2 & GPIO_IRQ_mask[2];
-		if (mask) {
-			GEDR2 = mask;
-			irq = IRQ_GPIO(64);
-			desc = irq_desc + irq;
-			do {
-				if (mask & 1)
-					desc_handle_irq(irq, desc);
-				irq++;
-				desc++;
-				mask >>= 1;
-			} while (mask);
-			loop = 1;
-		}
-
-		mask = GEDR3 & GPIO_IRQ_mask[3];
-		if (mask) {
-			GEDR3 = mask;
-			irq = IRQ_GPIO(96);
-			desc = irq_desc + irq;
-			do {
-				if (mask & 1)
-					desc_handle_irq(irq, desc);
-				irq++;
-				desc++;
-				mask >>= 1;
-			} while (mask);
-			loop = 1;
-		}
-	} while (loop);
-}
-
-static void pxa_ack_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	GEDR(gpio) = GPIO_bit(gpio);
-}
-
-static void pxa_mask_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	__clear_bit(gpio, GPIO_IRQ_mask);
-	GRER(gpio) &= ~GPIO_bit(gpio);
-	GFER(gpio) &= ~GPIO_bit(gpio);
-}
-
-static void pxa_unmask_muxed_gpio(unsigned int irq)
-{
-	int gpio = irq - IRQ_GPIO(2) + 2;
-	int idx = gpio >> 5;
-	__set_bit(gpio, GPIO_IRQ_mask);
-	GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
-	GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
-}
-
-static struct irq_chip pxa_muxed_gpio_chip = {
-	.name		= "GPIO",
-	.ack		= pxa_ack_muxed_gpio,
-	.mask		= pxa_mask_muxed_gpio,
-	.unmask		= pxa_unmask_muxed_gpio,
-	.set_type	= pxa_gpio_irq_type,
-};
-
-void __init pxa_init_irq_gpio(int gpio_nr)
-{
-	int irq, i;
-
-	pxa_last_gpio = gpio_nr - 1;
-
-	/* clear all GPIO edge detects */
-	for (i = 0; i < gpio_nr; i += 32) {
-		GFER(i) = 0;
-		GRER(i) = 0;
-		GEDR(i) = GEDR(i);
-	}
-
-	/* GPIO 0 and 1 must have their mask bit always set */
-	GPIO_IRQ_mask[0] = 3;
-
-	for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
-		set_irq_chip(irq, &pxa_low_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
 
-	for (irq = IRQ_GPIO(2); irq < IRQ_GPIO(gpio_nr); irq++) {
-		set_irq_chip(irq, &pxa_muxed_gpio_chip);
-		set_irq_handler(irq, handle_edge_irq);
-		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-	}
-
-	/* Install handler for GPIO>=2 edge detect interrupts */
-	set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
-	set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
-
-	pxa_init_gpio(gpio_nr);
-}
-
-void __init pxa_init_irq_set_wake(int (*set_wake)(unsigned int, unsigned int))
-{
-	pxa_internal_chip_low.set_wake = set_wake;
-#ifdef CONFIG_PXA27x
-	pxa_internal_chip_high.set_wake = set_wake;
-#endif
-	pxa_low_gpio_chip.set_wake = set_wake;
-	pxa_muxed_gpio_chip.set_wake = set_wake;
+	pxa_internal_irq_chip.set_wake = fn;
 }
 
 #ifdef CONFIG_PM
@@ -330,19 +80,11 @@ static unsigned long saved_icmr[2];
 
 static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 {
-	switch (dev->id) {
-	case 0:
-		saved_icmr[0] = ICMR;
-		ICMR = 0;
-		break;
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-	case 1:
-		saved_icmr[1] = ICMR2;
-		ICMR2 = 0;
-		break;
-#endif
-	default:
-		return -EINVAL;
+	int i, irq = PXA_IRQ(0);
+
+	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
+		saved_icmr[i] = _ICMR(irq);
+		_ICMR(irq) = 0;
 	}
 
 	return 0;
@@ -350,22 +92,14 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 
 static int pxa_irq_resume(struct sys_device *dev)
 {
-	switch (dev->id) {
-	case 0:
-		ICMR = saved_icmr[0];
-		ICLR = 0;
-		ICCR = 1;
-		break;
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
-	case 1:
-		ICMR2 = saved_icmr[1];
-		ICLR2 = 0;
-		break;
-#endif
-	default:
-		return -EINVAL;
+	int i, irq = PXA_IRQ(0);
+
+	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
+		_ICMR(irq) = saved_icmr[i];
+		_ICLR(irq) = 0;
 	}
 
+	ICCR = 1;
 	return 0;
 }
 #else
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index 2271d20ffeda..21880daabafe 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -18,6 +18,7 @@
 #include <asm/leds.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/trizeps4.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 0a4b54c21314..03396063b561 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -37,12 +37,11 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/ssp.h>
+#include <asm/arch/pxa27x_keypad.h>
 #include <asm/arch/littleton.h>
 
 #include "generic.h"
 
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
-
 /* Littleton MFP configurations */
 static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	/* LCD */
@@ -76,6 +75,21 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 
 	/* Debug Ethernet */
 	GPIO90_GPIO,
+
+	/* Keypad */
+	GPIO107_KP_DKIN_0,
+	GPIO108_KP_DKIN_1,
+	GPIO115_KP_MKIN_0,
+	GPIO116_KP_MKIN_1,
+	GPIO117_KP_MKIN_2,
+	GPIO118_KP_MKIN_3,
+	GPIO119_KP_MKIN_4,
+	GPIO120_KP_MKIN_5,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
 };
 
 static struct resource smc91x_resources[] = {
@@ -300,6 +314,54 @@ static void littleton_init_lcd(void)
 static inline void littleton_init_lcd(void) {};
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
 
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+static unsigned int littleton_matrix_key_map[] = {
+	/* KEY(row, col, key_code) */
+	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
+	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
+	KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
+
+	KEY(0, 3, KEY_KPASTERISK), 	/* * */
+	KEY(2, 3, KEY_KPDOT), 		/* # */
+
+	KEY(5, 4, KEY_ENTER),
+
+	KEY(5, 0, KEY_UP),
+	KEY(5, 1, KEY_DOWN),
+	KEY(5, 2, KEY_LEFT),
+	KEY(5, 3, KEY_RIGHT),
+	KEY(3, 2, KEY_HOME),
+	KEY(4, 1, KEY_END),
+	KEY(3, 3, KEY_BACK),
+
+	KEY(4, 0, KEY_SEND),
+	KEY(4, 2, KEY_VOLUMEUP),
+	KEY(4, 3, KEY_VOLUMEDOWN),
+
+	KEY(3, 0, KEY_F22),	/* soft1 */
+	KEY(3, 1, KEY_F23),	/* soft2 */
+};
+
+static struct pxa27x_keypad_platform_data littleton_keypad_info = {
+	.matrix_key_rows	= 6,
+	.matrix_key_cols	= 5,
+	.matrix_key_map		= littleton_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(littleton_matrix_key_map),
+
+	.enable_rotary0		= 1,
+	.rotary0_up_key		= KEY_UP,
+	.rotary0_down_key	= KEY_DOWN,
+
+	.debounce_interval	= 30,
+};
+static void __init littleton_init_keypad(void)
+{
+	pxa_set_keypad_info(&littleton_keypad_info);
+}
+#else
+static inline void littleton_init_keypad(void) {}
+#endif
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -312,6 +374,7 @@ static void __init littleton_init(void)
 	platform_device_register(&smc91x_device);
 
 	littleton_init_lcd();
+	littleton_init_keypad();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index afa62ffe3ad5..a20e4b1649d6 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -39,6 +39,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/lpd270.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index e7ae4bb3e361..ca209c443f34 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -42,6 +42,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/lubbock.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>
@@ -51,6 +52,40 @@
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long lubbock_pin_config[] __initdata = {
+	GPIO15_nCS_1,	/* CS1 - Flash */
+	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
+
+	/* SSP data pins */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* wakeup */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
 
 #define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
 
@@ -186,26 +221,6 @@ static struct platform_device sa1111_device = {
 	.resource	= sa1111_resources,
 };
 
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= 0x0c000c00,
-		.end	= 0x0c0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= LUBBOCK_ETH_IRQ,
-		.end	= LUBBOCK_ETH_IRQ,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-	[2] = {
-		.name	= "smc91x-attrib",
-		.start	= 0x0e000000,
-		.end	= 0x0e0fffff,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
 /* ADS7846 is connected through SSP ... and if your board has J5 populated,
  * you can select it to replace the ucb1400 by switching the touchscreen cable
  * (to J5) and poking board registers (as done below).  Else it's only useful
@@ -261,6 +276,26 @@ static struct spi_board_info spi_board_info[] __initdata = { {
 },
 };
 
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= 0x0c000c00,
+		.end	= 0x0c0fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= LUBBOCK_ETH_IRQ,
+		.end	= LUBBOCK_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= 0x0e000000,
+		.end	= 0x0e0fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
@@ -404,10 +439,6 @@ static int lubbock_mci_init(struct device *dev,
 		irq_handler_t detect_int,
 		void *data)
 {
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
 	/* detect card insert/eject */
 	mmc_detect_int = detect_int;
 	init_timer(&mmc_timer);
@@ -457,6 +488,8 @@ static void __init lubbock_init(void)
 {
 	int flashboot = (LUB_CONF_SWITCHES & 1);
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
+
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
@@ -489,46 +522,6 @@ static void __init lubbock_map_io(void)
 	pxa_map_io();
 	iotable_init(lubbock_io_desc, ARRAY_SIZE(lubbock_io_desc));
 
-	/* SSP data pins */
-	pxa_gpio_mode(GPIO23_SCLK_MD);
-	pxa_gpio_mode(GPIO25_STXD_MD);
-	pxa_gpio_mode(GPIO26_SRXD_MD);
-
-	/* This enables the BTUART */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
-
-	GPSR(GPIO48_nPOE) =
-		GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
-	/* This is for the SMC chip select */
-	pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00008000;
-	PGSR1 = 0x003F0202;
-	PGSR2 = 0x0001C000;
 	PCFR |= PCFR_OPDE;
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index d98ef7ada2f8..d70be75bd199 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -16,24 +16,106 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mfd/htc-pasic3.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
+#include <linux/pda_power.h>
 
 #include <asm/gpio.h>
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/arch/magician.h>
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxafb.h>
+#include <asm/arch/i2c.h>
+#include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/ohci.h>
 
 #include "generic.h"
 
+static unsigned long magician_pin_config[] = {
+
+	/* SDRAM and Static Memory I/O Signals */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,   /* PASIC3 */
+	GPIO79_nCS_3,   /* EGPIO CPLD */
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* PWM 0 */
+	GPIO16_PWM0_OUT,
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO31_I2S_SYNC,
+	GPIO113_I2S_SYSCLK,
+
+	/* SSP 2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO12_CIF_DD_7,
+	GPIO17_CIF_DD_6,
+	GPIO50_CIF_DD_3,
+	GPIO51_CIF_DD_2,
+	GPIO52_CIF_DD_4,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO55_CIF_DD_1,
+	GPIO81_CIF_DD_0,
+	GPIO82_CIF_DD_5,
+	GPIO84_CIF_FV,
+	GPIO85_CIF_LV,
+};
+
 /*
  * IRDA
  */
@@ -83,8 +165,64 @@ static struct platform_device gpio_keys = {
 	.id   = -1,
 };
 
+
+/*
+ * EGPIO (Xilinx CPLD)
+ *
+ * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start = PXA_CS3_PHYS,
+		.end   = PXA_CS3_PHYS + 0x20,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+		.end   = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start = 0,
+		.gpio_base = MAGICIAN_EGPIO(0, 0),
+		.num_gpios = 24,
+		.direction = HTC_EGPIO_OUTPUT,
+		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+	},
+	[1] = {
+		.reg_start = 4,
+		.gpio_base = MAGICIAN_EGPIO(4, 0),
+		.num_gpios = 24,
+		.direction = HTC_EGPIO_INPUT,
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width    = 8,
+	.bus_width    = 32,
+	.irq_base     = IRQ_BOARD_START,
+	.num_irqs     = 4,
+	.ack_register = 3,
+	.chip         = egpio_chips,
+	.num_chips    = ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device egpio = {
+	.name          = "htc-egpio",
+	.id            = -1,
+	.resource      = egpio_resources,
+	.num_resources = ARRAY_SIZE(egpio_resources),
+	.dev = {
+		.platform_data = &egpio_info,
+	},
+};
+
 /*
- * LCD - Toppoly TD028STEB1
+ * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
  */
 
 static struct pxafb_mode_info toppoly_modes[] = {
@@ -103,12 +241,99 @@ static struct pxafb_mode_info toppoly_modes[] = {
 	},
 };
 
+static struct pxafb_mode_info samsung_modes[] = {
+	{
+		.pixclock     = 96153,
+		.bpp          = 16,
+		.xres         = 240,
+		.yres         = 320,
+		.hsync_len    = 8,
+		.vsync_len    = 4,
+		.left_margin  = 9,
+		.upper_margin = 4,
+		.right_margin = 9,
+		.lower_margin = 4,
+		.sync         = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	},
+};
+
+static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	pr_debug("Toppoly LCD power\n");
+
+	if (on) {
+		pr_debug("on\n");
+		gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+		udelay(2000);
+		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
+		udelay(2000);
+		/* FIXME: enable LCDC here */
+		udelay(2000);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+		udelay(2000);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+	} else {
+		pr_debug("off\n");
+		msleep(15);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+		udelay(500);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+		udelay(1000);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
+	}
+}
+
+static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	pr_debug("Samsung LCD power\n");
+
+	if (on) {
+		pr_debug("on\n");
+		if (system_rev < 3)
+			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
+		else
+			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
+		mdelay(10);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+		mdelay(10);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+		mdelay(30);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+		mdelay(10);
+	} else {
+		pr_debug("off\n");
+		mdelay(10);
+		gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+		mdelay(30);
+		gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+		mdelay(10);
+		gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+		mdelay(10);
+		if (system_rev < 3)
+			gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
+		else
+			gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
+	}
+}
+
 static struct pxafb_mach_info toppoly_info = {
-	.modes       = toppoly_modes,
-	.num_modes   = 1,
-	.fixed_modes = 1,
-	.lccr0       = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
-	.lccr3       = LCCR3_PixRsEdg,
+	.modes           = toppoly_modes,
+	.num_modes       = 1,
+	.fixed_modes     = 1,
+	.lccr0           = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3           = LCCR3_PixRsEdg,
+	.pxafb_lcd_power = toppoly_lcd_power,
+};
+
+static struct pxafb_mach_info samsung_info = {
+	.modes           = samsung_modes,
+	.num_modes       = 1,
+	.fixed_modes     = 1,
+	.lccr0           = LCCR0_LDDALT | LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3           = LCCR3_PixFlEdg,
+	.pxafb_lcd_power = samsung_lcd_power,
 };
 
 /*
@@ -120,9 +345,18 @@ static void magician_set_bl_intensity(int intensity)
 	if (intensity) {
 		PWM_CTRL0 = 1;
 		PWM_PERVAL0 = 0xc8;
-		PWM_PWDUTY0 = intensity;
+		if (intensity > 0xc7) {
+			PWM_PWDUTY0 = intensity - 0x48;
+			gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
+		} else {
+			PWM_PWDUTY0 = intensity;
+			gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
+		}
+		gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1);
 		pxa_set_cken(CKEN_PWM0, 1);
 	} else {
+		/* PWM_PWDUTY0 = intensity; */
+		gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0);
 		pxa_set_cken(CKEN_PWM0, 0);
 	}
 }
@@ -130,18 +364,215 @@ static void magician_set_bl_intensity(int intensity)
 static struct generic_bl_info backlight_info = {
 	.default_intensity = 0x64,
 	.limit_mask        = 0x0b,
-	.max_intensity     = 0xc7,
+	.max_intensity     = 0xc7+0x48,
 	.set_bl_intensity  = magician_set_bl_intensity,
 };
 
 static struct platform_device backlight = {
-	.name = "corgi-bl",
+	.name = "generic-bl",
 	.dev  = {
 		.platform_data = &backlight_info,
 	},
 	.id   = -1,
 };
 
+/*
+ * LEDs
+ */
+
+struct gpio_led gpio_leds[] = {
+	{
+		.name = "magician::vibra",
+		.default_trigger = "none",
+		.gpio = GPIO22_MAGICIAN_VIBRA_EN,
+	},
+	{
+		.name = "magician::phone_bl",
+		.default_trigger = "none",
+		.gpio = GPIO103_MAGICIAN_LED_KP,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds = gpio_leds,
+	.num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &gpio_led_info,
+	},
+};
+
+static struct pasic3_led pasic3_leds[] = {
+	{
+		.led = {
+			.name            = "magician:red",
+			.default_trigger = "ds2760-battery.0-charging",
+		},
+		.hw_num = 0,
+		.bit2   = PASIC3_BIT2_LED0,
+		.mask   = PASIC3_MASK_LED0,
+	},
+	{
+		.led = {
+			.name            = "magician:green",
+			.default_trigger = "ds2760-battery.0-charging-or-full",
+		},
+		.hw_num = 1,
+		.bit2   = PASIC3_BIT2_LED1,
+		.mask   = PASIC3_MASK_LED1,
+	},
+	{
+		.led = {
+			.name            = "magician:blue",
+			.default_trigger = "bluetooth",
+		},
+		.hw_num = 2,
+		.bit2   = PASIC3_BIT2_LED2,
+		.mask   = PASIC3_MASK_LED2,
+	},
+};
+
+static struct platform_device pasic3;
+
+static struct pasic3_leds_machinfo __devinit pasic3_leds_info = {
+	.num_leds   = ARRAY_SIZE(pasic3_leds),
+	.power_gpio = EGPIO_MAGICIAN_LED_POWER,
+	.leds       = pasic3_leds,
+};
+
+/*
+ * PASIC3 with DS1WM
+ */
+
+static struct resource pasic3_resources[] = {
+	[0] = {
+		.start  = PXA_CS2_PHYS,
+		.end	= PXA_CS2_PHYS + 0x1b,
+		.flags  = IORESOURCE_MEM,
+	},
+	/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
+	[1] = {
+		.start  = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.end    = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct pasic3_platform_data pasic3_platform_data = {
+	.bus_shift  = 2,
+	.led_pdata  = &pasic3_leds_info,
+	.clock_rate = 4000000,
+};
+
+static struct platform_device pasic3 = {
+	.name		= "pasic3",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pasic3_resources),
+	.resource	= pasic3_resources,
+	.dev = {
+		.platform_data = &pasic3_platform_data,
+	},
+};
+
+/*
+ * External power
+ */
+
+static int magician_is_ac_online(void)
+{
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
+static int magician_is_usb_online(void)
+{
+	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB);
+}
+
+static void magician_set_charge(int flags)
+{
+	gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags);
+	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
+}
+
+static char *magician_supplicants[] = {
+	"ds2760-battery.0", "backup-battery"
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.is_ac_online    = magician_is_ac_online,
+	.is_usb_online   = magician_is_usb_online,
+	.set_charge      = magician_set_charge,
+	.supplied_to     = magician_supplicants,
+	.num_supplicants = ARRAY_SIZE(magician_supplicants),
+};
+
+static struct resource power_supply_resources[] = {
+	[0] = {
+		.name  = "ac",
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_MAGICIAN_AC,
+		.end   = IRQ_MAGICIAN_AC,
+	},
+	[1] = {
+		.name  = "usb",
+		.flags = IORESOURCE_IRQ,
+		.start = IRQ_MAGICIAN_AC,
+		.end   = IRQ_MAGICIAN_AC,
+	},
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+	.resource      = power_supply_resources,
+	.num_resources = ARRAY_SIZE(power_supply_resources),
+};
+
+
+/*
+ * MMC/SD
+ */
+
+static int magician_mci_init(struct device *dev,
+				irq_handler_t detect_irq, void *data)
+{
+	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
+				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+				"MMC card detect", data);
+}
+
+static void magician_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *pdata = dev->platform_data;
+
+	gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
+}
+
+static int magician_mci_get_ro(struct device *dev)
+{
+	return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+}
+
+static void magician_mci_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_MAGICIAN_SD, data);
+}
+
+static struct pxamci_platform_data magician_mci_info = {
+	.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+	.init     = magician_mci_init,
+	.get_ro   = magician_mci_get_ro,
+	.setpower = magician_mci_setpower,
+	.exit     = magician_mci_exit,
+};
+
 
 /*
  * USB OHCI
@@ -166,6 +597,11 @@ static struct pxaohci_platform_data magician_ohci_info = {
  * StrataFlash
  */
 
+static void magician_set_vpp(struct map_info *map, int vpp)
+{
+	gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
+}
+
 #define PXA_CS_SIZE		0x04000000
 
 static struct resource strataflash_resource = {
@@ -176,13 +612,14 @@ static struct resource strataflash_resource = {
 
 static struct physmap_flash_data strataflash_data = {
 	.width = 4,
+	.set_vpp = magician_set_vpp,
 };
 
 static struct platform_device strataflash = {
 	.name          = "physmap-flash",
 	.id            = -1,
-	.num_resources = 1,
 	.resource      = &strataflash_resource,
+	.num_resources = 1,
 	.dev = {
 		.platform_data = &strataflash_data,
 	},
@@ -194,16 +631,43 @@ static struct platform_device strataflash = {
 
 static struct platform_device *devices[] __initdata = {
 	&gpio_keys,
+	&egpio,
 	&backlight,
+	&pasic3,
+	&power_supply,
 	&strataflash,
+	&leds_gpio,
 };
 
 static void __init magician_init(void)
 {
+	void __iomem *cpld;
+	int lcd_select;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_i2c_info(NULL);
+	pxa_set_mci_info(&magician_mci_info);
 	pxa_set_ohci_info(&magician_ohci_info);
 	pxa_set_ficp_info(&magician_ficp_info);
-	set_pxa_fb_info(&toppoly_info);
+
+	/* Check LCD type we have */
+	cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
+	if (cpld) {
+		u8 board_id = __raw_readb(cpld+0x14);
+		system_rev = board_id & 0x7;
+		lcd_select = board_id & 0x8;
+		iounmap(cpld);
+		pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
+		if (lcd_select && (system_rev < 3))
+			pxa_gpio_mode(GPIO75_MAGICIAN_SAMSUNG_POWER_MD);
+		pxa_gpio_mode(GPIO104_MAGICIAN_LCD_POWER_1_MD);
+		pxa_gpio_mode(GPIO105_MAGICIAN_LCD_POWER_2_MD);
+		pxa_gpio_mode(GPIO106_MAGICIAN_LCD_POWER_3_MD);
+		set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+	} else
+		pr_err("LCD detection: CPLD mapping failed\n");
 }
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 345c3deeb02e..18d47cfa2a18 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -24,6 +24,8 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/backlight.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -40,16 +42,94 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/mainstone.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
+#include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/ohci.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long mainstone_pin_config[] = {
+	/* Chip Select */
+	GPIO15_nCS_1,
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* USB Host Port 1 */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* AC97 */
+	GPIO45_AC97_SYSCLK,
+
+	/* Keypad */
+	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
 
 static unsigned long mainstone_irq_enabled;
 
@@ -278,13 +358,13 @@ static int mainstone_backlight_update_status(struct backlight_device *bl)
 	    bl->props.fb_blank != FB_BLANK_UNBLANK)
 		brightness = 0;
 
-	if (brightness != 0) {
-		pxa_gpio_mode(GPIO16_PWM0_MD);
+	if (brightness != 0)
 		pxa_set_cken(CKEN_PWM0, 1);
-	}
+
 	PWM_CTRL0 = 0;
 	PWM_PWDUTY0 = brightness;
 	PWM_PERVAL0 = bl->props.max_brightness;
+
 	if (brightness == 0)
 		pxa_set_cken(CKEN_PWM0, 0);
 	return 0; /* pointless return value */
@@ -362,16 +442,6 @@ static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_in
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
 	/* make sure SD/Memory Stick multiplexer's signals
 	 * are routed to MMC controller
 	 */
@@ -390,11 +460,11 @@ static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
 	if (( 1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: on\n", __func__);
 		MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
 		MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
 	} else {
-		printk(KERN_DEBUG "%s: off\n", __FUNCTION__);
+		printk(KERN_DEBUG "%s: off\n", __func__);
 		MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
 	}
 }
@@ -434,19 +504,39 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = {
 	.transceiver_mode = mainstone_irda_transceiver_mode,
 };
 
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_KEY,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mainstone_gpio_keys = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
+
+static struct platform_device mst_gpio_keys_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &mainstone_gpio_keys,
+	},
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&mst_audio_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
+	&mst_gpio_keys_device,
 };
 
 static int mainstone_ohci_init(struct device *dev)
 {
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
 	/* Set the Power Control Polarity Low and Power Sense
 	   Polarity Low to active low. */
 	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
@@ -460,10 +550,63 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.init		= mainstone_ohci_init,
 };
 
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+static unsigned int mainstone_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
+	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
+	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
+	KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
+	KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
+	KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
+	KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
+	KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
+	KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
+
+	KEY(0, 4, KEY_DOT),	/* . */
+	KEY(1, 4, KEY_CLOSE),	/* @ */
+	KEY(4, 4, KEY_SLASH),
+	KEY(5, 4, KEY_BACKSLASH),
+	KEY(0, 5, KEY_HOME),
+	KEY(1, 5, KEY_LEFTSHIFT),
+	KEY(2, 5, KEY_SPACE),
+	KEY(3, 5, KEY_SPACE),
+	KEY(4, 5, KEY_ENTER),
+	KEY(5, 5, KEY_BACKSPACE),
+
+	KEY(0, 6, KEY_UP),
+	KEY(1, 6, KEY_DOWN),
+	KEY(2, 6, KEY_LEFT),
+	KEY(3, 6, KEY_RIGHT),
+	KEY(4, 6, KEY_SELECT),
+};
+
+struct pxa27x_keypad_platform_data mainstone_keypad_info = {
+	.matrix_key_rows	= 6,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= mainstone_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(mainstone_matrix_keys),
+
+	.enable_rotary0		= 1,
+	.rotary0_up_key		= KEY_UP,
+	.rotary0_down_key	= KEY_DOWN,
+
+	.debounce_interval	= 30,
+};
+
+static void __init mainstone_init_keypad(void)
+{
+	pxa_set_keypad_info(&mainstone_keypad_info);
+}
+#else
+static inline void mainstone_init_keypad(void) {}
+#endif
+
 static void __init mainstone_init(void)
 {
 	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
+
 	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
@@ -480,31 +623,6 @@ static void __init mainstone_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	/*
-	 * On Mainstone, we route AC97_SYSCLK via GPIO45 to
-	 * the audio daughter card
-	 */
-	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
-
-	GPSR(GPIO48_nPOE) =
-		GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |
-		GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) |
-		GPIO_bit(GPIO85_nPCE_1) |
-		GPIO_bit(GPIO54_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO85_nPCE_1_MD);
-	pxa_gpio_mode(GPIO54_nPCE_2_MD);
-	pxa_gpio_mode(GPIO79_pSKTSEL_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	/* reading Mainstone's "Virtual Configuration Register"
@@ -520,6 +638,9 @@ static void __init mainstone_init(void)
 	pxa_set_mci_info(&mainstone_mci_platform_data);
 	pxa_set_ficp_info(&mainstone_ficp_platform_data);
 	pxa_set_ohci_info(&mainstone_ohci_platform_data);
+	pxa_set_i2c_info(NULL);
+
+	mainstone_init_keypad();
 }
 
 
@@ -537,23 +658,9 @@ static void __init mainstone_map_io(void)
 	pxa_map_io();
 	iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
 
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x00008800;
-	PGSR1 = 0x00000002;
-	PGSR2 = 0x0001FC00;
-	PGSR3 = 0x00001F81;
-	PWER  = 0xC0000002;
-	PRER  = 0x00000002;
-	PFER  = 0x00000002;
  	/*	for use I SRAM as framebuffer.	*/
  	PSLR |= 0xF04;
  	PCFR = 0x66;
- 	/*	For Keypad wakeup.	*/
- 	KPC &=~KPC_ASACT;
- 	KPC |=KPC_AS;
- 	PKWR  = 0x000FD000;
- 	/*	Need read PKWR back after set it.	*/
- 	PKWR;
 }
 
 MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
new file mode 100644
index 000000000000..22097a1707cc
--- /dev/null
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -0,0 +1,245 @@
+/*
+ *  linux/arch/arm/mach-pxa/mfp-pxa2xx.c
+ *
+ *  PXA2xx pin mux configuration support
+ *
+ *  The GPIOs on PXA2xx can be configured as one of many alternate
+ *  functions, this is by concept samilar to the MFP configuration
+ *  on PXA3xx,  what's more important, the low power pin state and
+ *  wakeup detection are also supported by the same framework.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysdev.h>
+
+#include <asm/arch/hardware.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa2xx.h>
+
+#include "generic.h"
+
+#define PGSR(x)		__REG2(0x40F00020, ((x) & 0x60) >> 3)
+
+#define PWER_WE35	(1 << 24)
+
+struct gpio_desc {
+	unsigned	valid		: 1;
+	unsigned	can_wakeup	: 1;
+	unsigned	keypad_gpio	: 1;
+	unsigned int	mask; /* bit mask in PWER or PKWR */
+	unsigned long	config;
+};
+
+static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+
+static int __mfp_config_gpio(unsigned gpio, unsigned long c)
+{
+	unsigned long gafr, mask = GPIO_bit(gpio);
+	int fn;
+
+	fn = MFP_AF(c);
+	if (fn > 3)
+		return -EINVAL;
+
+	/* alternate function and direction */
+	gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
+	GAFR(gpio) = gafr |  (fn  << ((gpio & 0xf) * 2));
+
+	if (c & MFP_DIR_OUT)
+		GPDR(gpio) |= mask;
+	else
+		GPDR(gpio) &= ~mask;
+
+	/* low power state */
+	switch (c & MFP_LPM_STATE_MASK) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(gpio) |= mask;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(gpio) &= ~mask;
+		break;
+	case MFP_LPM_INPUT:
+		break;
+	default:
+		pr_warning("%s: invalid low power state for GPIO%d\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+
+	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
+	 * configurations of those pins not able to wakeup
+	 */
+	if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
+		pr_warning("%s: GPIO%d unable to wakeup\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+
+	if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
+		pr_warning("%s: output GPIO%d unable to wakeup\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
+{
+	unsigned long flags;
+	unsigned long *c;
+	int i, gpio;
+
+	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
+
+		gpio = mfp_to_gpio(MFP_PIN(*c));
+
+		if (!gpio_desc[gpio].valid) {
+			pr_warning("%s: GPIO%d is invalid pin\n",
+				__func__, gpio);
+			continue;
+		}
+
+		local_irq_save(flags);
+
+		gpio_desc[gpio].config = *c;
+		__mfp_config_gpio(gpio, *c);
+
+		local_irq_restore(flags);
+	}
+}
+
+int gpio_set_wake(unsigned int gpio, unsigned int on)
+{
+	struct gpio_desc *d;
+	unsigned long c;
+
+	if (gpio > mfp_to_gpio(MFP_PIN_GPIO127))
+		return -EINVAL;
+
+	d = &gpio_desc[gpio];
+	c = d->config;
+
+	if (!d->valid)
+		return -EINVAL;
+
+	if (d->keypad_gpio)
+		return -EINVAL;
+
+	if (d->can_wakeup && (c & MFP_LPM_CAN_WAKEUP)) {
+		if (on) {
+			PWER |= d->mask;
+
+			if (c & MFP_LPM_EDGE_RISE)
+				PRER |= d->mask;
+			else
+				PRER &= ~d->mask;
+
+			if (c & MFP_LPM_EDGE_FALL)
+				PFER |= d->mask;
+			else
+				PFER &= ~d->mask;
+		} else {
+			PWER &= ~d->mask;
+			PRER &= ~d->mask;
+			PFER &= ~d->mask;
+		}
+	}
+	return 0;
+}
+
+#ifdef CONFIG_PXA25x
+static int __init pxa25x_mfp_init(void)
+{
+	int i;
+
+	if (cpu_is_pxa25x()) {
+		for (i = 0; i <= 84; i++)
+			gpio_desc[i].valid = 1;
+
+		for (i = 0; i <= 15; i++) {
+			gpio_desc[i].can_wakeup = 1;
+			gpio_desc[i].mask = GPIO_bit(i);
+		}
+	}
+
+	return 0;
+}
+postcore_initcall(pxa25x_mfp_init);
+#endif /* CONFIG_PXA25x */
+
+#ifdef CONFIG_PXA27x
+static int pxa27x_pkwr_gpio[] = {
+	13, 16, 17, 34, 36, 37, 38, 39, 90, 91, 93, 94,
+	95, 96, 97, 98, 99, 100, 101, 102
+};
+
+int keypad_set_wake(unsigned int on)
+{
+	unsigned int i, gpio, mask = 0;
+
+	if (!on) {
+		PKWR = 0;
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+
+		gpio = pxa27x_pkwr_gpio[i];
+
+		if (gpio_desc[gpio].config & MFP_LPM_CAN_WAKEUP)
+			mask |= gpio_desc[gpio].mask;
+	}
+
+	PKWR = mask;
+	return 0;
+}
+
+static int __init pxa27x_mfp_init(void)
+{
+	int i, gpio;
+
+	if (cpu_is_pxa27x()) {
+		for (i = 0; i <= 120; i++) {
+			/* skip GPIO2, 5, 6, 7, 8, they are not
+			 * valid pins allow configuration
+			 */
+			if (i == 2 || i == 5 || i == 6 ||
+			    i == 7 || i == 8)
+				continue;
+
+			gpio_desc[i].valid = 1;
+		}
+
+		/* Keypad GPIOs */
+		for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+			gpio = pxa27x_pkwr_gpio[i];
+			gpio_desc[gpio].can_wakeup = 1;
+			gpio_desc[gpio].keypad_gpio = 1;
+			gpio_desc[gpio].mask = 1 << i;
+		}
+
+		/* Overwrite GPIO13 as a PWER wakeup source */
+		for (i = 0; i <= 15; i++) {
+			/* skip GPIO2, 5, 6, 7, 8 */
+			if (GPIO_bit(i) & 0x1e4)
+				continue;
+
+			gpio_desc[i].can_wakeup = 1;
+			gpio_desc[i].mask = GPIO_bit(i);
+		}
+
+		gpio_desc[35].can_wakeup = 1;
+		gpio_desc[35].mask = PWER_WE35;
+	}
+
+	return 0;
+}
+postcore_initcall(pxa27x_mfp_init);
+#endif /* CONFIG_PXA27x */
diff --git a/arch/arm/mach-pxa/mfp.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index f5809adce298..3a5b0fcbaf1f 100644
--- a/arch/arm/mach-pxa/mfp.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -42,7 +42,7 @@ struct pxa3xx_mfp_pin {
 static struct pxa3xx_mfp_pin mfp_table[MFP_PIN_MAX];
 
 /* mapping of MFP_LPM_* definitions to MFPR_LPM_* register bits */
-const static unsigned long mfpr_lpm[] = {
+static const unsigned long mfpr_lpm[] = {
 	MFPR_LPM_INPUT,
 	MFPR_LPM_DRIVE_LOW,
 	MFPR_LPM_DRIVE_HIGH,
@@ -52,7 +52,7 @@ const static unsigned long mfpr_lpm[] = {
 };
 
 /* mapping of MFP_PULL_* definitions to MFPR_PULL_* register bits */
-const static unsigned long mfpr_pull[] = {
+static const unsigned long mfpr_pull[] = {
 	MFPR_PULL_NONE,
 	MFPR_PULL_LOW,
 	MFPR_PULL_HIGH,
@@ -60,7 +60,7 @@ const static unsigned long mfpr_pull[] = {
 };
 
 /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
-const static unsigned long mfpr_edge[] = {
+static const unsigned long mfpr_edge[] = {
 	MFPR_EDGE_NONE,
 	MFPR_EDGE_RISE,
 	MFPR_EDGE_FALL,
@@ -234,22 +234,22 @@ static int pxa3xx_mfp_resume(struct sys_device *d)
 
 	return 0;
 }
+#else
+#define pxa3xx_mfp_suspend	NULL
+#define pxa3xx_mfp_resume	NULL
+#endif
 
-static struct sysdev_class mfp_sysclass = {
+struct sysdev_class pxa3xx_mfp_sysclass = {
 	.name		= "mfp",
 	.suspend	= pxa3xx_mfp_suspend,
 	.resume 	= pxa3xx_mfp_resume,
 };
 
-static struct sys_device mfp_device = {
-	.id		= 0,
-	.cls		= &mfp_sysclass,
-};
-
 static int __init mfp_init_devicefs(void)
 {
-	sysdev_class_register(&mfp_sysclass);
-	return sysdev_register(&mfp_device);
+	if (cpu_is_pxa3xx())
+		return sysdev_class_register(&pxa3xx_mfp_sysclass);
+
+	return 0;
 }
-device_initcall(mfp_init_devicefs);
-#endif
+postcore_initcall(mfp_init_devicefs);
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index c14696b9979d..3b945eb0aee3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -29,6 +29,7 @@
 #include <asm/mach/arch.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/pxa2xx-regs.h>
 #include <asm/arch/pxa2xx_spi.h>
 #include <asm/arch/pcm027.h>
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 3dda16a20049..e6be9d0aeccf 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -23,8 +23,16 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/ide.h>
+#include <linux/i2c.h>
+
+#include <media/soc_camera.h>
+
+#include <asm/gpio.h>
+#include <asm/arch/i2c.h>
+#include <asm/arch/camera.h>
 #include <asm/mach/map.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pcm990_baseboard.h>
@@ -258,6 +266,76 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
 };
 
 /*
+ * PXA27x Camera specific stuff
+ */
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static int pcm990_pxacamera_init(struct device *dev)
+{
+	pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
+	pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
+	pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
+	pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
+	pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
+	pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
+	pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
+	pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
+	pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
+	pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
+	pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
+	pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
+	pxa_gpio_mode(GPIO43_CIF_FV_MD);
+	pxa_gpio_mode(GPIO44_CIF_LV_MD);
+
+	return 0;
+}
+
+/*
+ * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
+ *	MCLK_EN:	Master clock is generated by PXA
+ *	PCP:		Data sampled on the falling edge of pixel clock
+ */
+struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
+	.init	= pcm990_pxacamera_init,
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
+	.mclk_10khz = 1000,
+};
+
+#include <linux/i2c/pca953x.h>
+
+static struct pca953x_platform_data pca9536_data = {
+	.gpio_base	= NR_BUILTIN_GPIO + 1,
+};
+
+static struct soc_camera_link iclink[] = {
+	{
+		.bus_id	= 0, /* Must match with the camera ID above */
+		.gpio	= NR_BUILTIN_GPIO + 1,
+	}, {
+		.bus_id	= 0, /* Must match with the camera ID above */
+	}
+};
+
+/* Board I2C devices. */
+static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
+	{
+		/* Must initialize before the camera(s) */
+		I2C_BOARD_INFO("pca953x", 0x41),
+		.type = "pca9536",
+		.platform_data = &pca9536_data,
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
+		.type = "mt9v022",
+		.platform_data = &iclink[0], /* With extender */
+	}, {
+		I2C_BOARD_INFO("mt9m001", 0x5d),
+		.type = "mt9m001",
+		.platform_data = &iclink[0], /* With extender */
+	},
+};
+#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
+
+/*
  * AC97 support
  * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
  */
@@ -326,5 +404,14 @@ void __init pcm990_baseboard_init(void)
 	/* USB host */
 	pxa_set_ohci_info(&pcm990_ohci_platform_data);
 
+	pxa_set_i2c_info(NULL);
+
+#if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
+
+	i2c_register_board_info(0, pcm990_i2c_devices,
+		ARRAY_SIZE(pcm990_i2c_devices));
+#endif
+
 	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 209eabf0ed3e..ca5ac196b47b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -32,6 +32,7 @@
 #include <asm/mach/irq.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/irda.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 599e53fcc2c5..d9b5450aee5b 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -26,6 +26,7 @@
 #include <asm/hardware.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/dma.h>
 
@@ -129,6 +130,8 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
 	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
 
+	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
+
 	/*
 	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
 	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
@@ -228,24 +231,10 @@ static inline void pxa25x_init_pm(void) {}
 static int pxa25x_set_wake(unsigned int irq, unsigned int on)
 {
 	int gpio = IRQ_TO_GPIO(irq);
-	uint32_t gpio_bit, mask = 0;
-
-	if (gpio >= 0 && gpio <= 15) {
-		gpio_bit = GPIO_bit(gpio);
-		mask = gpio_bit;
-		if (on) {
-			if (GRER(gpio) | gpio_bit)
-				PRER |= gpio_bit;
-			else
-				PRER &= ~gpio_bit;
-
-			if (GFER(gpio) | gpio_bit)
-				PFER |= gpio_bit;
-			else
-				PFER &= ~gpio_bit;
-		}
-		goto set_pwer;
-	}
+	uint32_t mask = 0;
+
+	if (gpio >= 0 && gpio < 85)
+		return gpio_set_wake(gpio, on);
 
 	if (irq == IRQ_RTCAlrm) {
 		mask = PWER_RTC;
@@ -265,9 +254,8 @@ set_pwer:
 
 void __init pxa25x_init_irq(void)
 {
-	pxa_init_irq_low();
-	pxa_init_irq_gpio(85);
-	pxa_init_irq_set_wake(pxa25x_set_wake);
+	pxa_init_irq(32, pxa25x_set_wake);
+	pxa_init_gpio(85, pxa25x_set_wake);
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {
@@ -325,4 +313,4 @@ static int __init pxa25x_init(void)
 	return ret;
 }
 
-subsys_initcall(pxa25x_init);
+postcore_initcall(pxa25x_init);
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 46a951c3e5a0..7a2449dd0fd4 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -23,6 +23,7 @@
 #include <asm/arch/irqs.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/mfp-pxa27x.h>
 #include <asm/arch/ohci.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/dma.h>
@@ -151,12 +152,15 @@ static struct clk pxa27x_clks[] = {
 
 	INIT_CKEN("USBCLK", USBHOST, 48000000, 0, &pxa27x_device_ohci.dev),
 	INIT_CKEN("I2CCLK", PWRI2C, 13000000, 0, &pxa27x_device_i2c_power.dev),
-	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, NULL),
+	INIT_CKEN("KBDCLK", KEYPAD, 32768, 0, &pxa27x_device_keypad.dev),
 
 	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
 	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
 	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
 
+	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
+	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
+
 	/*
 	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
 	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
@@ -283,37 +287,16 @@ static inline void pxa27x_init_pm(void) {}
 /* PXA27x:  Various gpios can issue wakeup events.  This logic only
  * handles the simple cases, not the WEMUX2 and WEMUX3 options
  */
-#define PXA27x_GPIO_NOWAKE_MASK \
-        ((1 << 8) | (1 << 7) | (1 << 6) | (1 << 5) | (1 << 2))
-#define WAKEMASK(gpio) \
-        (((gpio) <= 15) \
-                 ? ((1 << (gpio)) & ~PXA27x_GPIO_NOWAKE_MASK) \
-                 : ((gpio == 35) ? (1 << 24) : 0))
-
 static int pxa27x_set_wake(unsigned int irq, unsigned int on)
 {
 	int gpio = IRQ_TO_GPIO(irq);
 	uint32_t mask;
 
-	if ((gpio >= 0 && gpio <= 15) || (gpio == 35)) {
-		if (WAKEMASK(gpio) == 0)
-			return -EINVAL;
-
-		mask = WAKEMASK(gpio);
-
-		if (on) {
-			if (GRER(gpio) | GPIO_bit(gpio))
-				PRER |= mask;
-			else
-				PRER &= ~mask;
+	if (gpio >= 0 && gpio < 128)
+		return gpio_set_wake(gpio, on);
 
-			if (GFER(gpio) | GPIO_bit(gpio))
-				PFER |= mask;
-			else
-				PFER &= ~mask;
-		}
-		goto set_pwer;
-	}
+	if (irq == IRQ_KEYPAD)
+		return keypad_set_wake(on);
 
 	switch (irq) {
 	case IRQ_RTCAlrm:
@@ -326,7 +309,6 @@ static int pxa27x_set_wake(unsigned int irq, unsigned int on)
 		return -EINVAL;
 	}
 
-set_pwer:
 	if (on)
 		PWER |= mask;
 	else
@@ -337,10 +319,8 @@ set_pwer:
 
 void __init pxa27x_init_irq(void)
 {
-	pxa_init_irq_low();
-	pxa_init_irq_high();
-	pxa_init_irq_gpio(128);
-	pxa_init_irq_set_wake(pxa27x_set_wake);
+	pxa_init_irq(34, pxa27x_set_wake);
+	pxa_init_gpio(128, pxa27x_set_wake);
 }
 
 /*
@@ -386,10 +366,6 @@ static struct platform_device *devices[] __initdata = {
 
 static struct sys_device pxa27x_sysdev[] = {
 	{
-		.id	= 0,
-		.cls	= &pxa_irq_sysclass,
-	}, {
-		.id	= 1,
 		.cls	= &pxa_irq_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
@@ -420,4 +396,4 @@ static int __init pxa27x_init(void)
 	return ret;
 }
 
-subsys_initcall(pxa27x_init);
+postcore_initcall(pxa27x_init);
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 35f25fdaeba3..dde355e88fa1 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -110,6 +110,25 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
 }
 
 /*
+ * Return the current AC97 clock frequency.
+ */
+static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk)
+{
+	unsigned long rate = 312000000;
+	unsigned long ac97_div;
+
+	ac97_div = AC97_DIV;
+
+	/* This may loose precision for some rates but won't for the
+	 * standard 24.576MHz.
+	 */
+	rate /= (ac97_div >> 12) & 0x7fff;
+	rate *= (ac97_div & 0xfff);
+
+	return rate;
+}
+
+/*
  * Return the current HSIO bus clock frequency
  */
 static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
@@ -156,6 +175,27 @@ static const struct clkops clk_pxa3xx_hsio_ops = {
 	.getrate	= clk_pxa3xx_hsio_getrate,
 };
 
+static const struct clkops clk_pxa3xx_ac97_ops = {
+	.enable		= clk_pxa3xx_cken_enable,
+	.disable	= clk_pxa3xx_cken_disable,
+	.getrate	= clk_pxa3xx_ac97_getrate,
+};
+
+static void clk_pout_enable(struct clk *clk)
+{
+	OSCC |= OSCC_PEN;
+}
+
+static void clk_pout_disable(struct clk *clk)
+{
+	OSCC &= ~OSCC_PEN;
+}
+
+static const struct clkops clk_pout_ops = {
+	.enable		= clk_pout_enable,
+	.disable	= clk_pout_disable,
+};
+
 #define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
 	{						\
 		.name	= _name,			\
@@ -175,8 +215,16 @@ static const struct clkops clk_pxa3xx_hsio_ops = {
 	}
 
 static struct clk pxa3xx_clks[] = {
-	PXA3xx_CK("LCDCLK", LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
-	PXA3xx_CK("CAMCLK", CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+	{
+		.name           = "CLK_POUT",
+		.ops            = &clk_pout_ops,
+		.rate           = 13000000,
+		.delay          = 70,
+	},
+
+	PXA3xx_CK("LCDCLK",  LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
+	PXA3xx_CK("CAMCLK",  CAMERA, &clk_pxa3xx_hsio_ops, NULL),
+	PXA3xx_CK("AC97CLK", AC97,   &clk_pxa3xx_ac97_ops, NULL),
 
 	PXA3xx_CKEN("UARTCLK", FFUART, 14857000, 1, &pxa_device_ffuart.dev),
 	PXA3xx_CKEN("UARTCLK", BTUART, 14857000, 1, &pxa_device_btuart.dev),
@@ -185,6 +233,7 @@ static struct clk pxa3xx_clks[] = {
 	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
 	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
 	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
+	PXA3xx_CKEN("KBDCLK", KEYPAD,  32768, 0, &pxa27x_device_keypad.dev),
 
 	PXA3xx_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
 	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
@@ -305,8 +354,10 @@ static void pxa3xx_cpu_pm_enter(suspend_state_t state)
 	/*
 	 * Don't sleep if no wakeup sources are defined
 	 */
-	if (wakeup_src == 0)
+	if (wakeup_src == 0) {
+		printk(KERN_ERR "Not suspending: no wakeup sources\n");
 		return;
+	}
 
 	switch (state) {
 	case PM_SUSPEND_STANDBY:
@@ -446,15 +497,9 @@ static int pxa3xx_set_wake(unsigned int irq, unsigned int on)
 
 	return 0;
 }
-
-static void pxa3xx_init_irq_pm(void)
-{
-	pxa_init_irq_set_wake(pxa3xx_set_wake);
-}
-
 #else
 static inline void pxa3xx_init_pm(void) {}
-static inline void pxa3xx_init_irq_pm(void) {}
+#define pxa3xx_set_wake	NULL
 #endif
 
 void __init pxa3xx_init_irq(void)
@@ -465,10 +510,8 @@ void __init pxa3xx_init_irq(void)
 	value |= (1 << 6);
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
-	pxa_init_irq_low();
-	pxa_init_irq_high();
-	pxa_init_irq_gpio(128);
-	pxa3xx_init_irq_pm();
+	pxa_init_irq(56, pxa3xx_set_wake);
+	pxa_init_gpio(128, NULL);
 }
 
 /*
@@ -490,11 +533,9 @@ static struct platform_device *devices[] __initdata = {
 
 static struct sys_device pxa3xx_sysdev[] = {
 	{
-		.id	= 0,
 		.cls	= &pxa_irq_sysclass,
 	}, {
-		.id	= 1,
-		.cls	= &pxa_irq_sysclass,
+		.cls	= &pxa3xx_mfp_sysclass,
 	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
@@ -532,4 +573,4 @@ static int __init pxa3xx_init(void)
 	return ret;
 }
 
-subsys_initcall(pxa3xx_init);
+postcore_initcall(pxa3xx_init);
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index f9d1b61e1185..34cd585075b0 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -26,6 +26,7 @@
 #include <asm/mach-types.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/sharpsl.h>
 #include "sharpsl.h"
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 9e7773fca01c..62a02c3927c5 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -37,6 +37,7 @@
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/irda.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/ohci.h>
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 745a4dc7acdd..7a7f5f947cc5 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -26,6 +26,7 @@
 #include <asm/arch/sharpsl.h>
 #include <asm/arch/spitz.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index f99112d50b41..6458f6d371d9 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/gpio.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -32,7 +33,9 @@
 #include <asm/system.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa2xx-regs.h>
+#include <asm/arch/mfp-pxa25x.h>
 #include <asm/arch/irda.h>
+#include <asm/arch/i2c.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 
@@ -47,6 +50,110 @@
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long tosa_pin_config[] = {
+	GPIO78_nCS_2, /* Scoop */
+	GPIO80_nCS_4, /* tg6393xb */
+	GPIO33_nCS_5, /* Scoop */
+
+	// GPIO76 CARD_VCC_ON1
+
+	GPIO19_GPIO, /* Reset out */
+	GPIO1_RST | WAKEUP_ON_EDGE_FALL,
+
+	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
+	GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
+	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
+	GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
+	GPIO20_GPIO, /* EAR_IN */
+	GPIO22_GPIO, /* On */
+
+	GPIO5_GPIO, /* USB_IN */
+	GPIO32_GPIO, /* Pen IRQ */
+
+	GPIO7_GPIO, /* Jacket Detect */
+	GPIO14_GPIO, /* BAT0_CRG */
+	GPIO12_GPIO, /* BAT1_CRG */
+	GPIO17_GPIO, /* BAT0_LOW */
+	GPIO84_GPIO, /* BAT1_LOW */
+	GPIO38_GPIO, /* BAT_LOCK */
+
+	GPIO11_3_6MHz,
+	GPIO15_GPIO, /* TC6393XB IRQ */
+	GPIO18_RDY,
+	GPIO27_GPIO, /* LCD Sync */
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+	GPIO9_GPIO, /* Detect */
+	// GPIO10 nSD_INT
+
+	/* CF */
+	GPIO13_GPIO, /* CD_IRQ */
+	GPIO21_GPIO, /* Main Slot IRQ */
+	GPIO36_GPIO, /* Jacket Slot IRQ */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* AC97 */
+	GPIO31_AC97_SYNC,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	// GPIO79 nAUD_IRQ
+
+	/* FFUART */
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO37_FFUART_DSR,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* IrDA */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* Keybd */
+	GPIO58_GPIO,
+	GPIO59_GPIO,
+	GPIO60_GPIO,
+	GPIO61_GPIO,
+	GPIO62_GPIO,
+	GPIO63_GPIO,
+	GPIO64_GPIO,
+	GPIO65_GPIO,
+	GPIO66_GPIO,
+	GPIO67_GPIO,
+	GPIO68_GPIO,
+	GPIO69_GPIO,
+	GPIO70_GPIO,
+	GPIO71_GPIO,
+	GPIO72_GPIO,
+	GPIO73_GPIO,
+	GPIO74_GPIO,
+	GPIO75_GPIO,
+
+	/* SPI */
+	GPIO81_SSP2_CLK_OUT,
+	GPIO82_SSP2_FRM_OUT,
+	GPIO83_SSP2_TXD,
+};
+
 /*
  * SCOOP Device
  */
@@ -60,11 +167,10 @@ static struct resource tosa_scoop_resources[] = {
 
 static struct scoop_config tosa_scoop_setup = {
 	.io_dir 	= TOSA_SCOOP_IO_DIR,
-	.io_out		= TOSA_SCOOP_IO_OUT,
-
+	.gpio_base	= TOSA_SCOOP_GPIO_BASE,
 };
 
-struct platform_device tosascoop_device = {
+static struct platform_device tosascoop_device = {
 	.name		= "sharp-scoop",
 	.id		= 0,
 	.dev		= {
@@ -88,10 +194,10 @@ static struct resource tosa_scoop_jc_resources[] = {
 
 static struct scoop_config tosa_scoop_jc_setup = {
 	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
-	.io_out		= TOSA_SCOOP_JC_IO_OUT,
+	.gpio_base	= TOSA_SCOOP_JC_GPIO_BASE,
 };
 
-struct platform_device tosascoop_jc_device = {
+static struct platform_device tosascoop_jc_device = {
 	.name		= "sharp-scoop",
 	.id		= 1,
 	.dev		= {
@@ -118,50 +224,16 @@ static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
 },
 };
 
-static void tosa_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_config tosa_pcmcia_config = {
 	.devs         = &tosa_pcmcia_scoop[0],
 	.num_devs     = 2,
-	.pcmcia_init  = tosa_pcmcia_init,
 };
 
 /*
  * USB Device Controller
  */
-static void tosa_udc_command(int cmd)
-{
-	switch(cmd)	{
-		case PXA2XX_UDC_CMD_CONNECT:
-			set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
-			break;
-		case PXA2XX_UDC_CMD_DISCONNECT:
-			reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
-			break;
-	}
-}
-
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.udc_command		= tosa_udc_command,
+	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
 	.gpio_vbus		= TOSA_GPIO_USB_IN,
 	.gpio_vbus_inverted	= 1,
 };
@@ -175,19 +247,44 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller */
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
-
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
-	if (err)
+	if (err) {
 		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		goto err_irq;
+	}
 
+	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
+		goto err_gpio_wp;
+	}
+	err = gpio_direction_input(TOSA_GPIO_SD_WP);
+	if (err)
+		goto err_gpio_wp_dir;
+
+	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_pwr;
+	}
+	err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
+	if (err)
+		goto err_gpio_pwr_dir;
+
+	return 0;
+
+err_gpio_pwr_dir:
+	gpio_free(TOSA_GPIO_PWR_ON);
+err_gpio_pwr:
+err_gpio_wp_dir:
+	gpio_free(TOSA_GPIO_SD_WP);
+err_gpio_wp:
+	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+err_irq:
 	return err;
 }
 
@@ -196,19 +293,21 @@ static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
 	if (( 1 << vdd) & p_d->ocr_mask) {
-		set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+		gpio_set_value(TOSA_GPIO_PWR_ON, 1);
 	} else {
-		reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
+		gpio_set_value(TOSA_GPIO_PWR_ON, 0);
 	}
 }
 
 static int tosa_mci_get_ro(struct device *dev)
 {
-	return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
+	return gpio_get_value(TOSA_GPIO_SD_WP);
 }
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_PWR_ON);
+	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 }
 
@@ -223,21 +322,36 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static int tosa_irda_startup(struct device *dev)
 {
-	if (mode & IR_OFF) {
-		reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
-		pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
-		pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
-	} else {
-		pxa_gpio_mode(GPIO47_STTXD_MD);
-		set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
+	int ret;
+
+	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
+	if (ret)
+		return ret;
+
+	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
+	if (ret)
+		gpio_free(TOSA_GPIO_IR_POWERDWN);
+
+	return ret;
 	}
+
+static void tosa_irda_shutdown(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+}
+
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
 	.transceiver_cap  = IR_SIRMODE | IR_OFF,
 	.transceiver_mode = tosa_irda_transceiver_mode,
+	.startup = tosa_irda_startup,
+	.shutdown = tosa_irda_shutdown,
 };
 
 /*
@@ -249,12 +363,28 @@ static struct platform_device tosakbd_device = {
 };
 
 static struct gpio_keys_button tosa_gpio_keys[] = {
+	/*
+	 * Two following keys are directly tied to "ON" button of tosa. Why?
+	 * The first one can be used as a wakeup source, the second can't;
+	 * also the first one is OR of ac_powered and on_button.
+	 */
+	{
+		.type	= EV_PWR,
+		.code	= KEY_RESERVED,
+		.gpio	= TOSA_GPIO_POWERON,
+		.desc	= "Poweron",
+		.wakeup	= 1,
+		.active_low = 1,
+	},
 	{
 		.type	= EV_PWR,
 		.code	= KEY_SUSPEND,
 		.gpio	= TOSA_GPIO_ON_KEY,
 		.desc	= "On key",
-		.wakeup	= 1,
+		/*
+		 * can't be used as wakeup
+		 * .wakeup	= 1,
+		 */
 		.active_low = 1,
 	},
 	{
@@ -291,9 +421,40 @@ static struct platform_device tosa_gpio_keys_device = {
 /*
  * Tosa LEDs
  */
+static struct gpio_led tosa_gpio_leds[] = {
+	{
+		.name			= "tosa:amber:charge",
+		.default_trigger	= "main-battery-charging",
+		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
+	},
+	{
+		.name			= "tosa:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= TOSA_GPIO_NOTE_LED,
+	},
+	{
+		.name			= "tosa:dual:wlan",
+		.default_trigger	= "none",
+		.gpio			= TOSA_GPIO_WLAN_LED,
+	},
+	{
+		.name			= "tosa:blue:bluetooth",
+		.default_trigger	= "none",
+		.gpio			= TOSA_GPIO_BT_LED,
+	},
+};
+
+static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
+	.leds		= tosa_gpio_leds,
+	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
+};
+
 static struct platform_device tosaled_device = {
-    .name   = "tosa-led",
-    .id     = -1,
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_gpio_leds_platform_data,
+	},
 };
 
 static struct platform_device *devices[] __initdata = {
@@ -326,20 +487,13 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+	gpio_set_wake(MFP_PIN_GPIO1, 1);
+	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
-	pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
-	pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
-	pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
-
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00000000;
-	PGSR1 = 0x00FF0002;
-	PGSR2 = 0x00014000;
 	PCFR |= PCFR_OPDE;
 
 	/* enable batt_fault */
@@ -348,6 +502,7 @@ static void __init tosa_init(void)
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 853fc9433750..931885d86b91 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -41,6 +41,7 @@
 #include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxa2xx-gpio.h>
 #include <asm/arch/trizeps4.h>
 #include <asm/arch/audio.h>
 #include <asm/arch/pxafb.h>
@@ -217,7 +218,7 @@ void board_pcmcia_power(int power)
 		ConXS_BCR = trizeps_conxs_bcr;
 
 	}
-	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
 }
 
 /* backlight power switching for LCD panel */
@@ -228,7 +229,7 @@ static void board_backlight_power(int on)
 	} else {
 		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 	}
-	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
 	ConXS_BCR = trizeps_conxs_bcr;
 }
 
@@ -238,10 +239,10 @@ static void board_mci_power(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
 	if (( 1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __FUNCTION__);
+		pr_debug("%s: on\n", __func__);
 		/* FIXME fill in values here */
 	} else {
-		pr_debug("%s: off\n", __FUNCTION__);
+		pr_debug("%s: off\n", __func__);
 		/* FIXME fill in values here */
 	}
 }
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index afd2cbfca0d9..dbb546216be1 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -26,6 +26,7 @@
 #include <asm/arch/pxafb.h>
 #include <asm/arch/zylonite.h>
 #include <asm/arch/mmc.h>
+#include <asm/arch/pxa27x_keypad.h>
 
 #include "generic.h"
 
@@ -35,6 +36,8 @@ struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 int gpio_backlight;
 int gpio_eth_irq;
 
+int wm9713_irq;
+
 int lcd_id;
 int lcd_orientation;
 
@@ -249,6 +252,71 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+static unsigned int zylonite_matrix_key_map[] = {
+	/* KEY(row, col, key_code) */
+	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
+	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
+	KEY(2, 0, KEY_I), KEY(2, 1, KEY_J), KEY(2, 2, KEY_K), KEY(2, 5, KEY_L),
+	KEY(3, 0, KEY_M), KEY(3, 1, KEY_N), KEY(3, 2, KEY_O), KEY(3, 5, KEY_P),
+	KEY(5, 0, KEY_Q), KEY(5, 1, KEY_R), KEY(5, 2, KEY_S), KEY(5, 5, KEY_T),
+	KEY(6, 0, KEY_U), KEY(6, 1, KEY_V), KEY(6, 2, KEY_W), KEY(6, 5, KEY_X),
+	KEY(7, 1, KEY_Y), KEY(7, 2, KEY_Z),
+
+	KEY(4, 4, KEY_0), KEY(1, 3, KEY_1), KEY(4, 1, KEY_2), KEY(1, 4, KEY_3),
+	KEY(2, 3, KEY_4), KEY(4, 2, KEY_5), KEY(2, 4, KEY_6), KEY(3, 3, KEY_7),
+	KEY(4, 3, KEY_8), KEY(3, 4, KEY_9),
+
+	KEY(4, 5, KEY_SPACE),
+	KEY(5, 3, KEY_KPASTERISK), 	/* * */
+	KEY(5, 4, KEY_KPDOT), 		/* #" */
+
+	KEY(0, 7, KEY_UP),
+	KEY(1, 7, KEY_DOWN),
+	KEY(2, 7, KEY_LEFT),
+	KEY(3, 7, KEY_RIGHT),
+	KEY(2, 6, KEY_HOME),
+	KEY(3, 6, KEY_END),
+	KEY(6, 4, KEY_DELETE),
+	KEY(6, 6, KEY_BACK),
+	KEY(6, 3, KEY_CAPSLOCK),	/* KEY_LEFTSHIFT), */
+
+	KEY(4, 6, KEY_ENTER),		/* scroll push */
+	KEY(5, 7, KEY_ENTER),		/* keypad action */
+
+	KEY(0, 4, KEY_EMAIL),
+	KEY(5, 6, KEY_SEND),
+	KEY(4, 0, KEY_CALENDAR),
+	KEY(7, 6, KEY_RECORD),
+	KEY(6, 7, KEY_VOLUMEUP),
+	KEY(7, 7, KEY_VOLUMEDOWN),
+
+	KEY(0, 6, KEY_F22),	/* soft1 */
+	KEY(1, 6, KEY_F23),	/* soft2 */
+	KEY(0, 3, KEY_AUX),	/* contact */
+};
+
+static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 8,
+	.matrix_key_map		= zylonite_matrix_key_map,
+	.matrix_key_map_size	= ARRAY_SIZE(zylonite_matrix_key_map),
+
+	.enable_rotary0		= 1,
+	.rotary0_up_key		= KEY_UP,
+	.rotary0_down_key	= KEY_DOWN,
+
+	.debounce_interval	= 30,
+};
+
+static void __init zylonite_init_keypad(void)
+{
+	pxa_set_keypad_info(&zylonite_keypad_info);
+}
+#else
+static inline void zylonite_init_keypad(void) {}
+#endif
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -265,6 +333,7 @@ static void __init zylonite_init(void)
 
 	zylonite_init_lcd();
 	zylonite_init_mmc();
+	zylonite_init_keypad();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6ac04c09b0e9..324fb9daae28 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -21,7 +21,7 @@
 #include <asm/arch/mfp-pxa300.h>
 #include <asm/arch/zylonite.h>
 
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+#include "generic.h"
 
 /* PXA300/PXA310 common configurations */
 static mfp_cfg_t common_mfp_cfg[] __initdata = {
@@ -69,6 +69,9 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
 
+	/* WM9713 IRQ */
+	GPIO26_GPIO,
+
 	/* Keypad */
 	GPIO107_KP_DKIN_0 | MFP_LPM_EDGE_BOTH,
 	GPIO108_KP_DKIN_1 | MFP_LPM_EDGE_BOTH,
@@ -203,6 +206,9 @@ void __init zylonite_pxa300_init(void)
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
 		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
+
+		/* WM9713 IRQ */
+		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 	}
 
 	if (cpu_is_pxa300()) {
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index dfa79992b8ab..193d07903b06 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -21,7 +21,7 @@
 #include <asm/arch/mfp-pxa320.h>
 #include <asm/arch/zylonite.h>
 
-#define ARRAY_AND_SIZE(x)	(x), ARRAY_SIZE(x)
+#include "generic.h"
 
 static mfp_cfg_t mfp_cfg[] __initdata = {
 	/* LCD */
@@ -68,6 +68,9 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO39_AC97_BITCLK,
 	GPIO40_AC97_nACRESET,
 
+	/* WM9713 IRQ */
+	GPIO15_GPIO,
+
 	/* I2C */
 	GPIO32_I2C_SCL,
 	GPIO33_I2C_SDA,
@@ -190,5 +193,8 @@ void __init zylonite_pxa320_init(void)
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
 		zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
+
+		/* WM9713 IRQ */
+		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
 	}
 }
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 39b3bb7f1020..5ccde7cf39e8 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -10,7 +10,6 @@ config MACH_REALVIEW_EB
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore tile"
 	depends on MACH_REALVIEW_EB
-	select CACHE_L2X0
 	help
 	  Enable support for the ARM11MPCore tile on the Realview platform.
 
@@ -24,4 +23,18 @@ config REALVIEW_EB_ARM11MP_REVB
 	  kernel built with this option enabled is not compatible with
 	  other revisions of the ARM11MPCore tile.
 
+config MACH_REALVIEW_PB11MP
+	bool "Support RealView/PB11MPCore platform"
+	select ARM_GIC
+	help
+	  Include support for the ARM(R) RealView MPCore Platform Baseboard.
+	  PB11MPCore is a platform with an on-board ARM11MPCore and has
+	  support for PCI-E and Compact Flash.
+
+config MACH_REALVIEW_PB1176
+	bool "Support RealView/PB1176 platform"
+	select ARM_GIC
+	help
+	  Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+
 endmenu
diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile
index ca1e390c3c28..d2ae077431dd 100644
--- a/arch/arm/mach-realview/Makefile
+++ b/arch/arm/mach-realview/Makefile
@@ -4,5 +4,7 @@
 
 obj-y					:= core.o clock.o
 obj-$(CONFIG_MACH_REALVIEW_EB)		+= realview_eb.o
+obj-$(CONFIG_MACH_REALVIEW_PB11MP)	+= realview_pb11mp.o
+obj-$(CONFIG_MACH_REALVIEW_PB1176)	+= realview_pb1176.o
 obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o localtimer.o
 obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/arch/arm/mach-realview/clock.c b/arch/arm/mach-realview/clock.c
index 21325a4da9da..3e706c57833a 100644
--- a/arch/arm/mach-realview/clock.c
+++ b/arch/arm/mach-realview/clock.c
@@ -16,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
-#include <asm/semaphore.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 98aefc9f4df3..131990d196f5 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -109,22 +109,21 @@ static struct flash_platform_data realview_flash_data = {
 	.set_vpp		= realview_flash_set_vpp,
 };
 
-static struct resource realview_flash_resource = {
-	.start			= REALVIEW_FLASH_BASE,
-	.end			= REALVIEW_FLASH_BASE + REALVIEW_FLASH_SIZE,
-	.flags			= IORESOURCE_MEM,
-};
-
 struct platform_device realview_flash_device = {
 	.name			= "armflash",
 	.id			= 0,
 	.dev			= {
 		.platform_data	= &realview_flash_data,
 	},
-	.num_resources		= 1,
-	.resource		= &realview_flash_resource,
 };
 
+int realview_flash_register(struct resource *res, u32 num)
+{
+	realview_flash_device.resource = res;
+	realview_flash_device.num_resources = num;
+	return platform_device_register(&realview_flash_device);
+}
+
 static struct resource realview_i2c_resource = {
 	.start		= REALVIEW_I2C_BASE,
 	.end		= REALVIEW_I2C_BASE + SZ_4K - 1,
@@ -445,10 +444,10 @@ void realview_leds_event(led_event_t ledevt)
 /*
  * Where is the timer (VA)?
  */
-#define TIMER0_VA_BASE		 __io_address(REALVIEW_TIMER0_1_BASE)
-#define TIMER1_VA_BASE		(__io_address(REALVIEW_TIMER0_1_BASE) + 0x20)
-#define TIMER2_VA_BASE		 __io_address(REALVIEW_TIMER2_3_BASE)
-#define TIMER3_VA_BASE		(__io_address(REALVIEW_TIMER2_3_BASE) + 0x20)
+void __iomem *timer0_va_base;
+void __iomem *timer1_va_base;
+void __iomem *timer2_va_base;
+void __iomem *timer3_va_base;
 
 /*
  * How long is the timer interval?
@@ -475,7 +474,7 @@ static void timer_set_mode(enum clock_event_mode mode,
 
 	switch(mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
+		writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);
 
 		ctrl = TIMER_CTRL_PERIODIC;
 		ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
@@ -491,16 +490,16 @@ static void timer_set_mode(enum clock_event_mode mode,
 		ctrl = 0;
 	}
 
-	writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(ctrl, timer0_va_base + TIMER_CTRL);
 }
 
 static int timer_set_next_event(unsigned long evt,
 				struct clock_event_device *unused)
 {
-	unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
+	unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);
 
-	writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
-	writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
+	writel(evt, timer0_va_base + TIMER_LOAD);
+	writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);
 
 	return 0;
 }
@@ -536,7 +535,7 @@ static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
 	struct clock_event_device *evt = &timer0_clockevent;
 
 	/* clear the interrupt */
-	writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
+	writel(1, timer0_va_base + TIMER_INTCLR);
 
 	evt->event_handler(evt);
 
@@ -551,7 +550,7 @@ static struct irqaction realview_timer_irq = {
 
 static cycle_t realview_get_cycles(void)
 {
-	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
+	return ~readl(timer3_va_base + TIMER_VALUE);
 }
 
 static struct clocksource clocksource_realview = {
@@ -566,11 +565,11 @@ static struct clocksource clocksource_realview = {
 static void __init realview_clocksource_init(void)
 {
 	/* setup timer 0 as free-running clocksource */
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
-	writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
+	writel(0, timer3_va_base + TIMER_CTRL);
+	writel(0xffffffff, timer3_va_base + TIMER_LOAD);
+	writel(0xffffffff, timer3_va_base + TIMER_VALUE);
 	writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
-		TIMER3_VA_BASE + TIMER_CTRL);
+		timer3_va_base + TIMER_CTRL);
 
 	clocksource_realview.mult =
 		clocksource_khz2mult(1000, clocksource_realview.shift);
@@ -607,10 +606,10 @@ void __init realview_timer_init(unsigned int timer_irq)
 	/*
 	 * Initialise to a known state (all timers off)
 	 */
-	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER1_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER2_VA_BASE + TIMER_CTRL);
-	writel(0, TIMER3_VA_BASE + TIMER_CTRL);
+	writel(0, timer0_va_base + TIMER_CTRL);
+	writel(0, timer1_va_base + TIMER_CTRL);
+	writel(0, timer2_va_base + TIMER_CTRL);
+	writel(0, timer3_va_base + TIMER_CTRL);
 
 	/* 
 	 * Make irqs happen for the system timer
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 492a14c0d604..33dbbb41a663 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -55,8 +55,13 @@ extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *twd_base_addr;
 extern unsigned int twd_size;
 #endif
+extern void __iomem *timer0_va_base;
+extern void __iomem *timer1_va_base;
+extern void __iomem *timer2_va_base;
+extern void __iomem *timer3_va_base;
 
 extern void realview_leds_event(led_event_t ledevt);
 extern void realview_timer_init(unsigned int timer_irq);
+extern int realview_flash_register(struct resource *res, u32 num);
 
 #endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index de2b7159557d..3e57428affee 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,11 +15,14 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/arm_scu.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch/board-eb.h>
+#include <asm/arch/board-pb11mp.h>
+#include <asm/arch/scu.h>
+
 extern void realview_secondary_startup(void);
 
 /*
@@ -31,9 +34,15 @@ volatile int __cpuinitdata pen_release = -1;
 static unsigned int __init get_core_count(void)
 {
 	unsigned int ncores;
+	void __iomem *scu_base = 0;
+
+	if (machine_is_realview_eb() && core_tile_eb11mp())
+		scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE);
+	else if (machine_is_realview_pb11mp())
+		scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE);
 
-	if (machine_is_realview_eb() && core_tile_eb11mp()) {
-		ncores = __raw_readl(__io_address(REALVIEW_EB11MP_SCU_BASE) + SCU_CONFIG);
+	if (scu_base) {
+		ncores = __raw_readl(scu_base + SCU_CONFIG);
 		ncores = (ncores & 0x03) + 1;
 	} else
 		ncores = 1;
@@ -41,6 +50,26 @@ static unsigned int __init get_core_count(void)
 	return ncores;
 }
 
+/*
+ * Setup the SCU
+ */
+static void scu_enable(void)
+{
+	u32 scu_ctrl;
+	void __iomem *scu_base;
+
+	if (machine_is_realview_eb() && core_tile_eb11mp())
+		scu_base = __io_address(REALVIEW_EB11MP_SCU_BASE);
+	else if (machine_is_realview_pb11mp())
+		scu_base = __io_address(REALVIEW_TC11MP_SCU_BASE);
+	else
+		BUG();
+
+	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+	scu_ctrl |= 1;
+	__raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+}
+
 static DEFINE_SPINLOCK(boot_lock);
 
 void __cpuinit platform_secondary_init(unsigned int cpu)
@@ -57,7 +86,10 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
+	if (machine_is_realview_eb() && core_tile_eb11mp())
+		gic_cpu_init(0, __io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
+	else if (machine_is_realview_pb11mp())
+		gic_cpu_init(0, __io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
@@ -198,7 +230,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	 * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
 	 * realview_timer_init
 	 */
-	if (machine_is_realview_eb() && core_tile_eb11mp())
+	if ((machine_is_realview_eb() && core_tile_eb11mp()) ||
+	    machine_is_realview_pb11mp())
 		local_timer_setup(cpu);
 #endif
 
@@ -210,11 +243,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 		cpu_set(i, cpu_present_map);
 
 	/*
-	 * Do we need any more CPUs? If so, then let them know where
-	 * to start. Note that, on modern versions of MILO, the "poke"
-	 * doesn't actually do anything until each individual core is
-	 * sent a soft interrupt to get it out of WFI
+	 * Initialise the SCU if there are more than one CPU and let
+	 * them know where to start. Note that, on modern versions of
+	 * MILO, the "poke" doesn't actually do anything until each
+	 * individual core is sent a soft interrupt to get it out of
+	 * WFI
 	 */
-	if (max_cpus > 1)
+	if (max_cpus > 1) {
+		scu_enable();
 		poke_milo();
+	}
 }
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 60d9eb810246..5782d83fd886 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -51,13 +51,13 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_GIC_CPU_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_GIC_CPU_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_CPU_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_GIC_DIST_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
@@ -66,20 +66,20 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TIMER0_1_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TIMER0_1_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER0_1_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
-		.virtual	= IO_ADDRESS(REALVIEW_TIMER2_3_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_TIMER2_3_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_TIMER2_3_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	},
 #ifdef CONFIG_DEBUG_LL
 	{
-		.virtual	= IO_ADDRESS(REALVIEW_UART0_BASE),
-		.pfn		= __phys_to_pfn(REALVIEW_UART0_BASE),
+		.virtual	= IO_ADDRESS(REALVIEW_EB_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_EB_UART0_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}
@@ -136,12 +136,12 @@ static void __init realview_eb_map_io(void)
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define SMC_DMA		{ 0, 0 }
+#define EB_SMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define EB_SMC_DMA	{ 0, 0 }
 #define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
 #define MPMC_DMA	{ 0, 0 }
-#define CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
-#define CLCD_DMA	{ 0, 0 }
+#define EB_CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
+#define EB_CLCD_DMA	{ 0, 0 }
 #define DMAC_IRQ	{ IRQ_EB_DMA, NO_IRQ }
 #define DMAC_DMA	{ 0, 0 }
 
@@ -150,53 +150,53 @@ static void __init realview_eb_map_io(void)
  */
 #define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
 #define SCTL_DMA	{ 0, 0 }
-#define WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
-#define WATCHDOG_DMA	{ 0, 0 }
-#define GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO0_DMA	{ 0, 0 }
+#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
+#define EB_WATCHDOG_DMA	{ 0, 0 }
+#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
+#define EB_GPIO0_DMA	{ 0, 0 }
 #define GPIO1_IRQ	{ IRQ_EB_GPIO1, NO_IRQ }
 #define GPIO1_DMA	{ 0, 0 }
-#define RTC_IRQ		{ IRQ_EB_RTC, NO_IRQ }
-#define RTC_DMA		{ 0, 0 }
+#define EB_RTC_IRQ	{ IRQ_EB_RTC, NO_IRQ }
+#define EB_RTC_DMA	{ 0, 0 }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
 #define SCI_IRQ		{ IRQ_EB_SCI, NO_IRQ }
 #define SCI_DMA		{ 7, 6 }
-#define UART0_IRQ	{ IRQ_EB_UART0, NO_IRQ }
-#define UART0_DMA	{ 15, 14 }
-#define UART1_IRQ	{ IRQ_EB_UART1, NO_IRQ }
-#define UART1_DMA	{ 13, 12 }
-#define UART2_IRQ	{ IRQ_EB_UART2, NO_IRQ }
-#define UART2_DMA	{ 11, 10 }
-#define UART3_IRQ	{ IRQ_EB_UART3, NO_IRQ }
-#define UART3_DMA	{ 0x86, 0x87 }
-#define SSP_IRQ		{ IRQ_EB_SSP, NO_IRQ }
-#define SSP_DMA		{ 9, 8 }
+#define EB_UART0_IRQ	{ IRQ_EB_UART0, NO_IRQ }
+#define EB_UART0_DMA	{ 15, 14 }
+#define EB_UART1_IRQ	{ IRQ_EB_UART1, NO_IRQ }
+#define EB_UART1_DMA	{ 13, 12 }
+#define EB_UART2_IRQ	{ IRQ_EB_UART2, NO_IRQ }
+#define EB_UART2_DMA	{ 11, 10 }
+#define EB_UART3_IRQ	{ IRQ_EB_UART3, NO_IRQ }
+#define EB_UART3_DMA	{ 0x86, 0x87 }
+#define EB_SSP_IRQ	{ IRQ_EB_SSP, NO_IRQ }
+#define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
 AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
 AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
 AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
 AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
+AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AMBA_DEVICE(smc,   "dev:00",  EB_SMC,   NULL);
+AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
 AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
 AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    NULL);
+AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, NULL);
 AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    NULL);
 AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    NULL);
-AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
 AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      NULL);
+AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:f2",  EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:f3",  EB_UART2, NULL);
+AMBA_DEVICE(ssp0,  "dev:f4",  EB_SSP,   NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
@@ -223,11 +223,16 @@ static struct amba_device *amba_devs[] __initdata = {
 /*
  * RealView EB platform devices
  */
+static struct resource realview_eb_flash_resource = {
+	.start			= REALVIEW_EB_FLASH_BASE,
+	.end			= REALVIEW_EB_FLASH_BASE + REALVIEW_EB_FLASH_SIZE - 1,
+	.flags			= IORESOURCE_MEM,
+};
 
-static struct resource realview_eb_smc91x_resources[] = {
+static struct resource realview_eb_eth_resources[] = {
 	[0] = {
-		.start		= REALVIEW_ETH_BASE,
-		.end		= REALVIEW_ETH_BASE + SZ_64K - 1,
+		.start		= REALVIEW_EB_ETH_BASE,
+		.end		= REALVIEW_EB_ETH_BASE + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -237,13 +242,36 @@ static struct resource realview_eb_smc91x_resources[] = {
 	},
 };
 
-static struct platform_device realview_eb_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device realview_eb_eth_device = {
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(realview_eb_smc91x_resources),
-	.resource	= realview_eb_smc91x_resources,
+	.num_resources	= ARRAY_SIZE(realview_eb_eth_resources),
+	.resource	= realview_eb_eth_resources,
 };
 
+/*
+ * Detect and register the correct Ethernet device. RealView/EB rev D
+ * platforms use the newer SMSC LAN9118 Ethernet chip
+ */
+static int eth_device_register(void)
+{
+	void __iomem *eth_addr = ioremap(REALVIEW_EB_ETH_BASE, SZ_4K);
+	u32 idrev;
+
+	if (!eth_addr)
+		return -ENOMEM;
+
+	idrev = readl(eth_addr + 0x50);
+	if ((idrev & 0xFFFF0000) == 0x01180000)
+		/* SMSC LAN9118 chip present */
+		realview_eb_eth_device.name = "smc911x";
+	else
+		/* SMSC 91C111 chip present */
+		realview_eb_eth_device.name = "smc91x";
+
+	iounmap(eth_addr);
+	return platform_device_register(&realview_eb_eth_device);
+}
+
 static void __init gic_init_irq(void)
 {
 	if (core_tile_eb11mp()) {
@@ -263,14 +291,14 @@ static void __init gic_init_irq(void)
 
 #ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
 		/* board GIC, secondary */
-		gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
-		gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));
+		gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64);
+		gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE));
 		gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
 #endif
 	} else {
 		/* board GIC, primary */
-		gic_cpu_base_addr = __io_address(REALVIEW_GIC_CPU_BASE);
-		gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+		gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE);
+		gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29);
 		gic_cpu_init(0, gic_cpu_base_addr);
 	}
 }
@@ -301,14 +329,19 @@ static void realview_eb11mp_fixup(void)
 	kmi1_device.irq[0]	= IRQ_EB11MP_KMI1;
 
 	/* platform devices */
-	realview_eb_smc91x_resources[1].start	= IRQ_EB11MP_ETH;
-	realview_eb_smc91x_resources[1].end	= IRQ_EB11MP_ETH;
+	realview_eb_eth_resources[1].start	= IRQ_EB11MP_ETH;
+	realview_eb_eth_resources[1].end	= IRQ_EB11MP_ETH;
 }
 
 static void __init realview_eb_timer_init(void)
 {
 	unsigned int timer_irq;
 
+	timer0_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_EB_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_EB_TIMER2_3_BASE) + 0x20;
+
 	if (core_tile_eb11mp()) {
 #ifdef CONFIG_LOCAL_TIMERS
 		twd_base_addr = __io_address(REALVIEW_EB11MP_TWD_BASE);
@@ -332,16 +365,18 @@ static void __init realview_eb_init(void)
 	if (core_tile_eb11mp()) {
 		realview_eb11mp_fixup();
 
+#ifdef CONFIG_CACHE_L2X0
 		/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
 		 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
 		l2x0_init(__io_address(REALVIEW_EB11MP_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
 	}
 
 	clk_register(&realview_clcd_clk);
 
-	platform_device_register(&realview_flash_device);
-	platform_device_register(&realview_eb_smc91x_device);
+	realview_flash_register(&realview_eb_flash_resource, 1);
 	platform_device_register(&realview_i2c_device);
+	eth_device_register();
 
 	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
 		struct amba_device *d = amba_devs[i];
@@ -355,8 +390,8 @@ static void __init realview_eb_init(void)
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
 	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
-	.phys_io	= REALVIEW_UART0_BASE,
-	.io_pg_offst	= (IO_ADDRESS(REALVIEW_UART0_BASE) >> 18) & 0xfffc,
+	.phys_io	= REALVIEW_EB_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= realview_eb_map_io,
 	.init_irq	= gic_init_irq,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
new file mode 100644
index 000000000000..cf7f576a5860
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -0,0 +1,292 @@
+/*
+ *  linux/arch/arm/mach-realview/realview_pb1176.c
+ *
+ *  Copyright (C) 2008 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/board-pb1176.h>
+#include <asm/arch/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_pb1176_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB1176_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB1176_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_DC1176_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_DC1176_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB1176_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB1176_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB1176_L220_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB1176_L220_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PB1176_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB1176_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static void __init realview_pb1176_map_io(void)
+{
+	iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
+}
+
+/*
+ * RealView PB1176 AMBA devices
+ */
+#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2, NO_IRQ }
+#define GPIO2_DMA	{ 0, 0 }
+#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3, NO_IRQ }
+#define GPIO3_DMA	{ 0, 0 }
+#define AACI_IRQ	{ IRQ_PB1176_AACI, NO_IRQ }
+#define AACI_DMA	{ 0x80, 0x81 }
+#define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
+#define MMCI0_DMA	{ 0x84, 0 }
+#define KMI0_IRQ	{ IRQ_PB1176_KMI0, NO_IRQ }
+#define KMI0_DMA	{ 0, 0 }
+#define KMI1_IRQ	{ IRQ_PB1176_KMI1, NO_IRQ }
+#define KMI1_DMA	{ 0, 0 }
+#define PB1176_SMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define PB1176_SMC_DMA	{ 0, 0 }
+#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA	{ 0, 0 }
+#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
+#define PB1176_CLCD_DMA	{ 0, 0 }
+#define DMAC_IRQ	{ IRQ_PB1176_DMAC, NO_IRQ }
+#define DMAC_DMA	{ 0, 0 }
+#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA	{ 0, 0 }
+#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
+#define PB1176_WATCHDOG_DMA	{ 0, 0 }
+#define PB1176_GPIO0_IRQ	{ IRQ_PB1176_GPIO0, NO_IRQ }
+#define PB1176_GPIO0_DMA	{ 0, 0 }
+#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1, NO_IRQ }
+#define GPIO1_DMA	{ 0, 0 }
+#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC, NO_IRQ }
+#define PB1176_RTC_DMA	{ 0, 0 }
+#define SCI_IRQ		{ IRQ_PB1176_SCI, NO_IRQ }
+#define SCI_DMA		{ 7, 6 }
+#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0, NO_IRQ }
+#define PB1176_UART0_DMA	{ 15, 14 }
+#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1, NO_IRQ }
+#define PB1176_UART1_DMA	{ 13, 12 }
+#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2, NO_IRQ }
+#define PB1176_UART2_DMA	{ 11, 10 }
+#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
+#define PB1176_UART3_DMA	{ 0x86, 0x87 }
+#define PB1176_SSP_IRQ		{ IRQ_PB1176_SSP, NO_IRQ }
+#define PB1176_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PB1176_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PB1176_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PB1176_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PB1176_CLCD,	&clcd_plat_data);
+//AMBA_DEVICE(dmac,	"issp:30",	PB1176_DMAC,	NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+//	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB1176 platform devices
+ */
+static struct resource realview_pb1176_flash_resource = {
+	.start			= REALVIEW_PB1176_FLASH_BASE,
+	.end			= REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+	.flags			= IORESOURCE_MEM,
+};
+
+static struct resource realview_pb1176_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB1176_ETH_BASE,
+		.end		= REALVIEW_PB1176_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_PB1176_ETH,
+		.end		= IRQ_PB1176_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device realview_pb1176_smsc911x_device = {
+	.name		= "smc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(realview_pb1176_smsc911x_resources),
+	.resource	= realview_pb1176_smsc911x_resources,
+};
+
+static void __init gic_init_irq(void)
+{
+	/* ARM1176 DevChip GIC, primary */
+	gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE);
+	gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START);
+	gic_cpu_init(0, gic_cpu_base_addr);
+
+	/* board GIC, secondary */
+	gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START);
+	gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
+	gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
+}
+
+static void __init realview_pb1176_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PB1176_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PB1176_TIMER2_3_BASE) + 0x20;
+
+	realview_timer_init(IRQ_DC1176_TIMER0);
+}
+
+static struct sys_timer realview_pb1176_timer = {
+	.init		= realview_pb1176_timer_init,
+};
+
+static void __init realview_pb1176_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	/* 128Kb (16Kb/way) 8-way associativity. evmon/parity/share enabled. */
+	l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
+#endif
+
+	clk_register(&realview_clcd_clk);
+
+	realview_flash_register(&realview_pb1176_flash_resource, 1);
+	platform_device_register(&realview_pb1176_smsc911x_device);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PB1176_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= realview_pb1176_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pb1176_timer,
+	.init_machine	= realview_pb1176_init,
+MACHINE_END
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
new file mode 100644
index 000000000000..f7ce1c5a178a
--- /dev/null
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -0,0 +1,342 @@
+/*
+ *  linux/arch/arm/mach-realview/realview_pb11mp.c
+ *
+ *  Copyright (C) 2008 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <asm/arch/board-pb11mp.h>
+#include <asm/arch/irqs.h>
+
+#include "core.h"
+#include "clock.h"
+
+static struct map_desc realview_pb11mp_io_desc[] __initdata = {
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_SYS_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER0_1_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER0_1_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_TIMER2_3_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_TIMER2_3_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_TC11MP_L220_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_TC11MP_L220_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_DEBUG_LL
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_PB11MP_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+#endif
+};
+
+static void __init realview_pb11mp_map_io(void)
+{
+	iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
+}
+
+/*
+ * RealView PB11MPCore AMBA devices
+ */
+
+#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2, NO_IRQ }
+#define GPIO2_DMA		{ 0, 0 }
+#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3, NO_IRQ }
+#define GPIO3_DMA		{ 0, 0 }
+#define AACI_IRQ		{ IRQ_TC11MP_AACI, NO_IRQ }
+#define AACI_DMA		{ 0x80, 0x81 }
+#define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
+#define MMCI0_DMA		{ 0x84, 0 }
+#define KMI0_IRQ		{ IRQ_TC11MP_KMI0, NO_IRQ }
+#define KMI0_DMA		{ 0, 0 }
+#define KMI1_IRQ		{ IRQ_TC11MP_KMI1, NO_IRQ }
+#define KMI1_DMA		{ 0, 0 }
+#define PB11MP_SMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define PB11MP_SMC_DMA		{ 0, 0 }
+#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
+#define MPMC_DMA		{ 0, 0 }
+#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD, NO_IRQ }
+#define PB11MP_CLCD_DMA		{ 0, 0 }
+#define DMAC_IRQ		{ IRQ_PB11MP_DMAC, NO_IRQ }
+#define DMAC_DMA		{ 0, 0 }
+#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
+#define SCTL_DMA		{ 0, 0 }
+#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG, NO_IRQ }
+#define PB11MP_WATCHDOG_DMA	{ 0, 0 }
+#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0, NO_IRQ }
+#define PB11MP_GPIO0_DMA	{ 0, 0 }
+#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1, NO_IRQ }
+#define GPIO1_DMA		{ 0, 0 }
+#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC, NO_IRQ }
+#define PB11MP_RTC_DMA		{ 0, 0 }
+#define SCI_IRQ			{ IRQ_PB11MP_SCI, NO_IRQ }
+#define SCI_DMA			{ 7, 6 }
+#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0, NO_IRQ }
+#define PB11MP_UART0_DMA	{ 15, 14 }
+#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1, NO_IRQ }
+#define PB11MP_UART1_DMA	{ 13, 12 }
+#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2, NO_IRQ }
+#define PB11MP_UART2_DMA	{ 11, 10 }
+#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3, NO_IRQ }
+#define PB11MP_UART3_DMA	{ 0x86, 0x87 }
+#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP, NO_IRQ }
+#define PB11MP_SSP_DMA		{ 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	NULL);
+AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		NULL);
+AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		NULL);
+AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:f2",	PB11MP_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:f3",	PB11MP_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:f4",	PB11MP_SSP,	NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd,	"issp:20",	PB11MP_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+	&dmac_device,
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&uart3_device,
+	&smc_device,
+	&clcd_device,
+	&sctl_device,
+	&wdog_device,
+	&gpio0_device,
+	&gpio1_device,
+	&gpio2_device,
+	&rtc_device,
+	&sci0_device,
+	&ssp0_device,
+	&aaci_device,
+	&mmc0_device,
+	&kmi0_device,
+	&kmi1_device,
+};
+
+/*
+ * RealView PB11MPCore platform devices
+ */
+static struct resource realview_pb11mp_flash_resource[] = {
+	[0] = {
+		.start		= REALVIEW_PB11MP_FLASH0_BASE,
+		.end		= REALVIEW_PB11MP_FLASH0_BASE + REALVIEW_PB11MP_FLASH0_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB11MP_FLASH1_BASE,
+		.end		= REALVIEW_PB11MP_FLASH1_BASE + REALVIEW_PB11MP_FLASH1_SIZE - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct resource realview_pb11mp_smsc911x_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB11MP_ETH_BASE,
+		.end		= REALVIEW_PB11MP_ETH_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IRQ_TC11MP_ETH,
+		.end		= IRQ_TC11MP_ETH,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device realview_pb11mp_smsc911x_device = {
+	.name		= "smc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(realview_pb11mp_smsc911x_resources),
+	.resource	= realview_pb11mp_smsc911x_resources,
+};
+
+struct resource realview_pb11mp_cf_resources[] = {
+	[0] = {
+		.start		= REALVIEW_PB11MP_CF_BASE,
+		.end		= REALVIEW_PB11MP_CF_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= REALVIEW_PB11MP_CF_MEM_BASE,
+		.end		= REALVIEW_PB11MP_CF_MEM_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start		= -1,		/* FIXME: Find correct irq */
+		.end		= -1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device realview_pb11mp_cf_device = {
+	.name		= "compactflash",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(realview_pb11mp_cf_resources),
+	.resource	= realview_pb11mp_cf_resources,
+};
+
+static void __init gic_init_irq(void)
+{
+	unsigned int pldctrl;
+
+	/* new irq mode with no DCC */
+	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_PB11MP_SYS_PLD_CTRL1);
+	pldctrl |= 2 << 22;
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_PB11MP_SYS_PLD_CTRL1);
+	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
+
+	/* ARM11MPCore test chip GIC, primary */
+	gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE);
+	gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, gic_cpu_base_addr);
+
+	/* board GIC, secondary */
+	gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START);
+	gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
+	gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
+}
+
+static void __init realview_pb11mp_timer_init(void)
+{
+	timer0_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE);
+	timer1_va_base = __io_address(REALVIEW_PB11MP_TIMER0_1_BASE) + 0x20;
+	timer2_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE);
+	timer3_va_base = __io_address(REALVIEW_PB11MP_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+	twd_base_addr = __io_address(REALVIEW_TC11MP_TWD_BASE);
+	twd_size = REALVIEW_TC11MP_TWD_SIZE;
+#endif
+	realview_timer_init(IRQ_TC11MP_TIMER0_1);
+}
+
+static struct sys_timer realview_pb11mp_timer = {
+	.init		= realview_pb11mp_timer_init,
+};
+
+static void __init realview_pb11mp_init(void)
+{
+	int i;
+
+#ifdef CONFIG_CACHE_L2X0
+	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+	l2x0_init(__io_address(REALVIEW_TC11MP_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
+
+	clk_register(&realview_clcd_clk);
+
+	realview_flash_register(realview_pb11mp_flash_resource,
+				ARRAY_SIZE(realview_pb11mp_flash_resource));
+	platform_device_register(&realview_pb11mp_smsc911x_device);
+	platform_device_register(&realview_i2c_device);
+	platform_device_register(&realview_pb11mp_cf_device);
+
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+		struct amba_device *d = amba_devs[i];
+		amba_device_register(d, &iomem_resource);
+	}
+
+#ifdef CONFIG_LEDS
+	leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
+	/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+	.phys_io	= REALVIEW_PB11MP_UART0_BASE,
+	.io_pg_offst	= (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= realview_pb11mp_map_io,
+	.init_irq	= gic_init_irq,
+	.timer		= &realview_pb11mp_timer,
+	.init_machine	= realview_pb11mp_init,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index e2079cf9266f..cd3dc0834b3b 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -97,6 +97,13 @@ config BAST_PC104_IRQ
 	  Say Y	here to enable the PC104 IRQ routing on the
 	  Simtec BAST (EB2410ITX)
 
+config MACH_TCT_HAMMER
+	bool "TCT Hammer Board"
+	select CPU_S3C2410
+	help
+	   Say Y here if you are using the TinCanTools Hammer Board
+           <http://www.tincantools.com>
+
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select PM_SIMTEC if PM
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 3e7a85594d9c..cabc13ce09e4 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -27,5 +27,6 @@ obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
 obj-$(CONFIG_MACH_OTOM)		+= mach-otom.o
 obj-$(CONFIG_MACH_AML_M5900)	+= mach-amlm5900.o
 obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
+obj-$(CONFIG_MACH_TCT_HAMMER)	+= mach-tct_hammer.o
 obj-$(CONFIG_MACH_VR1000)	+= mach-vr1000.o usb-simtec.o
 obj-$(CONFIG_MACH_QT2410)	+= mach-qt2410.o
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 66175471fff3..661a2358ac22 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
@@ -236,6 +237,36 @@ static struct platform_device bast_device_nor = {
 
 /* NAND Flash on BAST board */
 
+#ifdef CONFIG_PM
+static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
+{
+	/* ensure that an nRESET is not generated on resume. */
+	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+
+	return 0;
+}
+
+static int bast_pm_resume(struct sys_device *sd)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	return 0;
+}
+
+#else
+#define bast_pm_suspend NULL
+#define bast_pm_resume NULL
+#endif
+
+static struct sysdev_class bast_pm_sysclass = {
+	.name		= "mach-bast",
+	.suspend	= bast_pm_suspend,
+	.resume		= bast_pm_resume,
+};
+
+static struct sys_device bast_pm_sysdev = {
+	.cls		= &bast_pm_sysclass,
+};
 
 static int smartmedia_map[] = { 0 };
 static int chip0_map[] = { 1 };
@@ -561,10 +592,10 @@ static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
 
-	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.parent = &clk_upll;
 	s3c24xx_dclk0.rate   = 12*1000*1000;
 
-	s3c24xx_dclk1.parent = NULL;
+	s3c24xx_dclk1.parent = &clk_upll;
 	s3c24xx_dclk1.rate   = 24*1000*1000;
 
 	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
@@ -586,6 +617,9 @@ static void __init bast_map_io(void)
 
 static void __init bast_init(void)
 {
+	sysdev_class_register(&bast_pm_sysclass);
+	sysdev_register(&bast_pm_sysdev);
+
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 }
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
new file mode 100644
index 000000000000..d90d445ccfb4
--- /dev/null
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -0,0 +1,160 @@
+/* linux/arch/arm/mach-s3c2410/mach-tct_hammer.c
+ *
+ * Copyright (c) 2007 TinCanTools
+ *	David Anders <danders@amltd.com>
+
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * @History:
+ * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ ***********************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/plat-s3c/regs-serial.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
+
+#ifdef CONFIG_MTD_PARTITIONS
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/physmap.h>
+
+static struct resource tct_hammer_nor_resource = {
+		.start = 0x00000000,
+		.end   = 0x01000000 - 1,
+		.flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition tct_hammer_mtd_partitions[] = {
+	{
+		.name		= "System",
+		.size		= 0x240000,
+		.offset		= 0,
+		.mask_flags 	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "JFFS2",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data tct_hammer_flash_data = {
+	.width		= 2,
+	.parts		= tct_hammer_mtd_partitions,
+	.nr_parts	= ARRAY_SIZE(tct_hammer_mtd_partitions),
+};
+
+static struct platform_device tct_hammer_device_nor = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev = {
+			.platform_data = &tct_hammer_flash_data,
+		},
+	.num_resources	= 1,
+	.resource	= &tct_hammer_nor_resource,
+};
+
+#endif
+
+static struct map_desc tct_hammer_iodesc[] __initdata = {
+};
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[1] = {
+		.hwport	     = 1,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	},
+	[2] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+	}
+};
+
+
+static struct platform_device *tct_hammer_devices[] __initdata = {
+	&s3c_device_adc,
+	&s3c_device_wdt,
+	&s3c_device_i2c,
+	&s3c_device_usb,
+	&s3c_device_rtc,
+	&s3c_device_usbgadget,
+	&s3c_device_sdi,
+#ifdef CONFIG_MTD_PARTITIONS
+	&tct_hammer_device_nor,
+#endif
+};
+
+static void __init tct_hammer_map_io(void)
+{
+	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
+	s3c24xx_init_clocks(0);
+	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
+}
+
+static void __init tct_hammer_init(void)
+{
+	platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
+}
+
+MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= tct_hammer_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.init_machine	= tct_hammer_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 3aade7b78fe5..c56423373ff3 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -393,7 +393,7 @@ static void __init vr1000_map_io(void)
 {
 	/* initialise clock sources */
 
-	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.parent = &clk_upll;
 	s3c24xx_dclk0.rate   = 12*1000*1000;
 
 	s3c24xx_dclk1.parent = NULL;
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index abf1599c9f97..98a0de924c22 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -175,7 +175,7 @@ void __init s3c2412_init_clocks(int xtal)
 	/* work out clock scalings */
 
 	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2421_CLKDIVN_ARMDIVN) ? 2 : 1);
+	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
 	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
 
 	/* print brieft summary of clocks, etc */
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 3d3dfa95db8e..47258915a2f9 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -413,10 +413,10 @@ static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
 
-	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.parent = &clk_upll;
 	s3c24xx_dclk0.rate   = 12*1000*1000;
 
-	s3c24xx_dclk1.parent = NULL;
+	s3c24xx_dclk1.parent = &clk_upll;
 	s3c24xx_dclk1.rate   = 24*1000*1000;
 
 	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 78af7664988b..8a8acdbd072d 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -18,6 +18,7 @@
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
+#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -344,10 +345,10 @@ static void __init osiris_map_io(void)
 
 	/* initialise the clocks */
 
-	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.parent = &clk_upll;
 	s3c24xx_dclk0.rate   = 12*1000*1000;
 
-	s3c24xx_dclk1.parent = NULL;
+	s3c24xx_dclk1.parent = &clk_upll;
 	s3c24xx_dclk1.rate   = 24*1000*1000;
 
 	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 7a61e8d33ab7..8e0244631d65 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index f60b7a66dfa0..842d9e6dc5ff 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -206,7 +206,7 @@ static int __init badge4_init(void)
 	if (ret < 0)
 		printk(KERN_ERR
 		       "%s: SA-1111 initialization failed (%d)\n",
-		       __FUNCTION__, ret);
+		       __func__, ret);
 
 
 	/* maybe turn on 5v0 from the start */
@@ -240,11 +240,11 @@ void badge4_set_5V(unsigned subsystem, int on)
 	/* detect on->off and off->on transitions */
 	if ((!old_5V_bitmap) && (badge4_5V_bitmap)) {
 		/* was off, now on */
-		printk(KERN_INFO "%s: enabling 5V supply rail\n", __FUNCTION__);
+		printk(KERN_INFO "%s: enabling 5V supply rail\n", __func__);
 		GPSR = BADGE4_GPIO_PCMEN5V;
 	} else if ((old_5V_bitmap) && (!badge4_5V_bitmap)) {
 		/* was on, now off */
-		printk(KERN_INFO "%s: disabling 5V supply rail\n", __FUNCTION__);
+		printk(KERN_INFO "%s: disabling 5V supply rail\n", __func__);
 		GPCR = BADGE4_GPIO_PCMEN5V;
 	}
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index d68630b74d78..343368aa82de 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -139,7 +139,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
 
 	if (settings->speed == 0) {
 		panic("%s: couldn't find dram setting for speed %d\n",
-		      __FUNCTION__, new_speed);
+		      __func__, new_speed);
 	}
 
 	/* No risk, no fun: run with interrupts on! */
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 1fbe053e8b59..e5080286060e 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -129,7 +129,7 @@ int sa1100_request_dma (dma_device_t device, const char *device_id,
 	if (err) {
 		printk(KERN_ERR
 		       "%s: unable to request IRQ %d for %s\n",
-		       __FUNCTION__, IRQ_DMA0 + i, device_id);
+		       __func__, IRQ_DMA0 + i, device_id);
 		dma->device = 0;
 		return err;
 	}
@@ -165,12 +165,12 @@ void sa1100_free_dma(dma_regs_t *regs)
 		if (regs == (dma_regs_t *)&DDAR(i))
 			break;
 	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
 		return;
 	}
 
 	if (!dma_chan[i].device) {
-		printk(KERN_ERR "%s: Trying to free free DMA\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Trying to free free DMA\n", __func__);
 		return;
 	}
 
@@ -329,7 +329,7 @@ void sa1100_reset_dma(dma_regs_t *regs)
 		if (regs == (dma_regs_t *)&DDAR(i))
 			break;
 	if (i >= SA1100_DMA_CHANNELS) {
-		printk(KERN_ERR "%s: bad DMA identifier\n", __FUNCTION__);
+		printk(KERN_ERR "%s: bad DMA identifier\n", __func__);
 		return;
 	}
 
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5c84c604ed86..0c2fa1c4fb4c 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -139,37 +139,6 @@ unsigned long long sched_clock(void)
 	return v;
 }
 
-int gpio_direction_input(unsigned gpio)
-{
-	unsigned long flags;
-
-	if (gpio > GPIO_MAX)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	GPDR &= ~GPIO_GPIO(gpio);
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(gpio_direction_input);
-
-int gpio_direction_output(unsigned gpio, int value)
-{
-	unsigned long flags;
-
-	if (gpio > GPIO_MAX)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	gpio_set_value(gpio, value);
-	GPDR |= GPIO_GPIO(gpio);
-	local_irq_restore(flags);
-	return 0;
-}
-
-EXPORT_SYMBOL(gpio_direction_output);
-
 /*
  * Default power-off for SA1100
  */
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index f085d68e568e..793c2e6c991f 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -9,6 +9,7 @@ struct sys_timer;
 extern struct sys_timer sa1100_timer;
 extern void __init sa1100_map_io(void);
 extern void __init sa1100_init_irq(void);
+extern void __init sa1100_init_gpio(void);
 
 #define SET_BANK(__nr,__start,__size) \
 	mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
new file mode 100644
index 000000000000..372f1f4f54a1
--- /dev/null
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -0,0 +1,65 @@
+/*
+ * linux/arch/arm/mach-sa1100/gpio.c
+ *
+ * Generic SA-1100 GPIO handling
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/gpio.h>
+#include <asm/hardware.h>
+#include "generic.h"
+
+static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return GPLR & GPIO_GPIO(offset);
+}
+
+static void sa1100_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	if (value)
+		GPSR = GPIO_GPIO(offset);
+	else
+		GPCR = GPIO_GPIO(offset);
+}
+
+static int sa1100_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	GPDR &= ~GPIO_GPIO(offset);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static int sa1100_direction_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	sa1100_gpio_set(chip, offset, value);
+	GPDR |= GPIO_GPIO(offset);
+	local_irq_restore(flags);
+	return 0;
+}
+
+static struct gpio_chip sa1100_gpio_chip = {
+	.label			= "gpio",
+	.direction_input	= sa1100_direction_input,
+	.direction_output	= sa1100_direction_output,
+	.set			= sa1100_gpio_set,
+	.get			= sa1100_gpio_get,
+	.base			= 0,
+	.ngpio			= GPIO_MAX + 1,
+};
+
+void __init sa1100_init_gpio(void)
+{
+	gpiochip_add(&sa1100_gpio_chip);
+}
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index b72fee0f2538..8473c37b77d6 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -596,7 +596,7 @@ static void h3800_control_egpio(enum ipaq_egpio_type x, int setp)
 	case IPAQ_EGPIO_CODEC_NRESET:
 	case IPAQ_EGPIO_AUDIO_ON:
 	case IPAQ_EGPIO_QMUTE:
-		printk("%s: error - should not be called\n", __FUNCTION__);
+		printk("%s: error - should not be called\n", __func__);
 		break;
 	case IPAQ_EGPIO_OPT_NVRAM_ON:
 		SET_ASIC2(GPIO2_OPT_ON_NVRAM);
@@ -638,7 +638,7 @@ static int h3800_pm_callback(int req)
 	static u16 asic2_data;
 	int result = 0;
 
-	printk("%s %d\n", __FUNCTION__, req);
+	printk("%s %d\n", __func__, req);
 
 	switch (req) {
 	case PM_RESUME:
@@ -666,7 +666,7 @@ static int h3800_pm_callback(int req)
 		asic2_data = H3800_ASIC2_GPIOPIOD;
 		break;
 	default:
-		printk("%s: unrecognized PM callback\n", __FUNCTION__);
+		printk("%s: unrecognized PM callback\n", __func__);
 		break;
 	}
 	return result;
@@ -706,7 +706,7 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 {
 	int i;
 
-	if (0) printk("%s: interrupt received\n", __FUNCTION__);
+	if (0) printk("%s: interrupt received\n", __func__);
 
 	desc->chip->ack(irq);
 
@@ -716,21 +716,21 @@ static void h3800_IRQ_demux(unsigned int irq, struct irq_desc *desc)
 
 		/* KPIO */
 		irq = H3800_ASIC2_KPIINTFLAG;
-		if (0) printk("%s KPIO 0x%08X\n", __FUNCTION__, irq);
+		if (0) printk("%s KPIO 0x%08X\n", __func__, irq);
 		for (j = 0; j < H3800_KPIO_IRQ_COUNT; j++)
 			if (irq & kpio_irq_mask[j])
 				handle_edge_irq(H3800_KPIO_IRQ_COUNT + j, irq_desc + H3800_KPIO_IRQ_COUNT + j);
 
 		/* GPIO2 */
 		irq = H3800_ASIC2_GPIINTFLAG;
-		if (0) printk("%s GPIO 0x%08X\n", __FUNCTION__, irq);
+		if (0) printk("%s GPIO 0x%08X\n", __func__, irq);
 		for (j = 0; j < H3800_GPIO_IRQ_COUNT; j++)
 			if (irq & gpio_irq_mask[j])
 				handle_edge_irq(H3800_GPIO_IRQ_COUNT + j, irq_desc + H3800_GPIO_IRQ_COUNT + j);
 	}
 
 	if (i >= MAX_ASIC_ISR_LOOPS)
-		printk("%s: interrupt processing overrun\n", __FUNCTION__);
+		printk("%s: interrupt processing overrun\n", __func__);
 
 	/* For level-based interrupts */
 	desc->chip->unmask(irq);
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index 3dc17d7bf38e..fa0403af7eec 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -347,4 +347,6 @@ void __init sa1100_init_irq(void)
 	 */
 	set_irq_chip(IRQ_GPIO11_27, &sa1100_normal_chip);
 	set_irq_chained_handler(IRQ_GPIO11_27, sa1100_high_gpio_handler);
+
+	sa1100_init_gpio();
 }
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index c2677368d6af..a9799cb35b74 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -13,67 +13,69 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/timex.h>
-#include <linux/signal.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
 #include <asm/hardware.h>
 
-#define RTC_DEF_DIVIDER		(32768 - 1)
-#define RTC_DEF_TRIM            0
+#define MIN_OSCR_DELTA 2
 
-static int sa1100_set_rtc(void)
+static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id)
 {
-	unsigned long current_time = xtime.tv_sec;
+	struct clock_event_device *c = dev_id;
 
-	if (RTSR & RTSR_ALE) {
-		/* make sure not to forward the clock over an alarm */
-		unsigned long alarm = RTAR;
-		if (current_time >= alarm && alarm >= RCNR)
-			return -ERESTARTSYS;
-	}
-	RCNR = current_time;
-	return 0;
-}
+	/* Disarm the compare/match, signal the event. */
+	OIER &= ~OIER_E0;
+	OSSR = OSSR_M0;
+	c->event_handler(c);
 
-#ifdef CONFIG_NO_IDLE_HZ
-static unsigned long initial_match;
-static int match_posponed;
-#endif
+	return IRQ_HANDLED;
+}
 
-static irqreturn_t
-sa1100_timer_interrupt(int irq, void *dev_id)
+static int
+sa1100_osmr0_set_next_event(unsigned long delta, struct clock_event_device *c)
 {
-	unsigned int next_match;
+	unsigned long flags, next, oscr;
 
-#ifdef CONFIG_NO_IDLE_HZ
-	if (match_posponed) {
-		match_posponed = 0;
-		OSMR0 = initial_match;
-	}
-#endif
+	raw_local_irq_save(flags);
+	OIER |= OIER_E0;
+	next = OSCR + delta;
+	OSMR0 = next;
+	oscr = OSCR;
+	raw_local_irq_restore(flags);
 
-	/*
-	 * Loop until we get ahead of the free running timer.
-	 * This ensures an exact clock tick count and time accuracy.
-	 * Since IRQs are disabled at this point, coherence between
-	 * lost_ticks(updated in do_timer()) and the match reg value is
-	 * ensured, hence we can use do_gettimeofday() from interrupt
-	 * handlers.
-	 */
-	do {
-		timer_tick();
-		OSSR = OSSR_M0;  /* Clear match on timer 0 */
-		next_match = (OSMR0 += LATCH);
-	} while ((signed long)(next_match - OSCR) <= 0);
+	return (signed)(next - oscr) <= MIN_OSCR_DELTA ? -ETIME : 0;
+}
 
-	return IRQ_HANDLED;
+static void
+sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
+{
+	unsigned long flags;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		raw_local_irq_save(flags);
+		OIER &= ~OIER_E0;
+		OSSR = OSSR_M0;
+		raw_local_irq_restore(flags);
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+	case CLOCK_EVT_MODE_PERIODIC:
+		break;
+	}
 }
 
-static struct irqaction sa1100_timer_irq = {
-	.name		= "SA11xx Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sa1100_timer_interrupt,
+static struct clock_event_device ckevt_sa1100_osmr0 = {
+	.name		= "osmr0",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 32,
+	.rating		= 200,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= sa1100_osmr0_set_next_event,
+	.set_mode	= sa1100_osmr0_set_mode,
 };
 
 static cycle_t sa1100_read_oscr(void)
@@ -90,62 +92,34 @@ static struct clocksource cksrc_sa1100_oscr = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static struct irqaction sa1100_timer_irq = {
+	.name		= "ost0",
+	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.handler	= sa1100_ost0_interrupt,
+	.dev_id		= &ckevt_sa1100_osmr0,
+};
+
 static void __init sa1100_timer_init(void)
 {
-	unsigned long flags;
-
-	set_rtc = sa1100_set_rtc;
-
 	OIER = 0;		/* disable any timer interrupts */
 	OSSR = 0xf;		/* clear status on all timers */
-	setup_irq(IRQ_OST0, &sa1100_timer_irq);
-	local_irq_save(flags);
-	OIER = OIER_E0;		/* enable match on timer 0 to cause interrupts */
-	OSMR0 = OSCR + LATCH;	/* set initial match */
-	local_irq_restore(flags);
+
+	ckevt_sa1100_osmr0.mult =
+		div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift);
+	ckevt_sa1100_osmr0.max_delta_ns =
+		clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
+	ckevt_sa1100_osmr0.min_delta_ns =
+		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
 
 	cksrc_sa1100_oscr.mult =
 		clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift);
 
-	clocksource_register(&cksrc_sa1100_oscr);
-}
-
-#ifdef CONFIG_NO_IDLE_HZ
-static int sa1100_dyn_tick_enable_disable(void)
-{
-	/* nothing to do */
-	return 0;
-}
-
-static void sa1100_dyn_tick_reprogram(unsigned long ticks)
-{
-	if (ticks > 1) {
-		initial_match = OSMR0;
-		OSMR0 = initial_match + ticks * LATCH;
-		match_posponed = 1;
-	}
-}
+	setup_irq(IRQ_OST0, &sa1100_timer_irq);
 
-static irqreturn_t
-sa1100_dyn_tick_handler(int irq, void *dev_id)
-{
-	if (match_posponed) {
-		match_posponed = 0;
-		OSMR0 = initial_match;
-		if ((signed long)(initial_match - OSCR) <= 0)
-			return sa1100_timer_interrupt(irq, dev_id);
-	}
-	return IRQ_NONE;
+	clocksource_register(&cksrc_sa1100_oscr);
+	clockevents_register_device(&ckevt_sa1100_osmr0);
 }
 
-static struct dyn_tick_timer sa1100_dyn_tick = {
-	.enable		= sa1100_dyn_tick_enable_disable,
-	.disable	= sa1100_dyn_tick_enable_disable,
-	.reprogram	= sa1100_dyn_tick_reprogram,
-	.handler	= sa1100_dyn_tick_handler,
-};
-#endif
-
 #ifdef CONFIG_PM
 unsigned long osmr[4], oier;
 
@@ -181,7 +155,4 @@ struct sys_timer sa1100_timer = {
 	.init		= sa1100_timer_init,
 	.suspend	= sa1100_timer_suspend,
 	.resume		= sa1100_timer_resume,
-#ifdef CONFIG_NO_IDLE_HZ
-	.dyn_tick	= &sa1100_dyn_tick,
-#endif
 };
diff --git a/arch/arm/mach-versatile/clock.c b/arch/arm/mach-versatile/clock.c
index 9858c96560e2..9336508ec0b2 100644
--- a/arch/arm/mach-versatile/clock.c
+++ b/arch/arm/mach-versatile/clock.c
@@ -17,7 +17,6 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 
-#include <asm/semaphore.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 76348f060f27..746cbb7c8e95 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -18,6 +18,7 @@ config CPU_ARM610
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
+	select CPU_PABRT_NOIFAR
 	help
 	  The ARM610 is the successor to the ARM3 processor
 	  and was produced by VLSI Technology Inc.
@@ -49,6 +50,7 @@ config CPU_ARM710
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
+	select CPU_PABRT_NOIFAR
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -64,6 +66,7 @@ config CPU_ARM720T
 	default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -113,6 +116,7 @@ config CPU_ARM920T
 	default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -135,6 +139,7 @@ config CPU_ARM922T
 	default y if ARCH_LH7A40X || ARCH_KS8695
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -155,6 +160,7 @@ config CPU_ARM925T
  	default y if ARCH_OMAP15XX
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -175,6 +181,7 @@ config CPU_ARM926T
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9 || ARCH_NS9XXX || ARCH_DAVINCI
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
@@ -226,6 +233,7 @@ config CPU_ARM1020
 	depends on ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -244,6 +252,7 @@ config CPU_ARM1020E
 	depends on ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -257,6 +266,7 @@ config CPU_ARM1022
 	depends on ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -275,6 +285,7 @@ config CPU_ARM1026
 	depends on ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -293,6 +304,7 @@ config CPU_SA110
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -314,6 +326,7 @@ config CPU_SA1100
 	default y
 	select CPU_32v4
 	select CPU_ABRT_EV4
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -326,6 +339,7 @@ config CPU_XSCALE
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -345,10 +359,11 @@ config CPU_XSC3
 # Feroceon
 config CPU_FEROCEON
 	bool
-	depends on ARCH_ORION
+	depends on ARCH_ORION5X
 	default y
 	select CPU_32v5
 	select CPU_ABRT_EV5T
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
@@ -366,11 +381,12 @@ config CPU_FEROCEON_OLD_ID
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor"
-	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
 	default y if ARCH_MX3
 	default y if ARCH_MSM7X00A
 	select CPU_32v6
 	select CPU_ABRT_EV6
+	select CPU_PABRT_NOIFAR
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -393,10 +409,11 @@ config CPU_32v6K
 # ARMv7
 config CPU_V7
 	bool "Support ARM V7 processor"
-	depends on ARCH_INTEGRATOR
+	depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
+	select CPU_PABRT_IFAR
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -458,6 +475,12 @@ config CPU_ABRT_EV6
 config CPU_ABRT_EV7
 	bool
 
+config CPU_PABRT_IFAR
+	bool
+
+config CPU_PABRT_NOIFAR
+	bool
+
 # The cache model
 config CPU_CACHE_V3
 	bool
@@ -572,6 +595,13 @@ config ARM_THUMB
 
 	  If you don't know what this all is, saying Y is a safe choice.
 
+config ARM_THUMBEE
+	bool "Enable ThumbEE CPU extension"
+	depends on CPU_V7
+	help
+	  Say Y here if you have a CPU with the ThumbEE extension and code to
+	  make use of it. Say N for code that can run on CPUs without ThumbEE.
+
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
 	depends on ARCH_SUPPORTS_BIG_ENDIAN
@@ -671,5 +701,9 @@ config OUTER_CACHE
 	default n
 
 config CACHE_L2X0
-	bool
+	bool "Enable the L2x0 outer cache controller"
+	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176
+	default y
 	select OUTER_CACHE
+	help
+	  This option enables the L2x0 PrimeCell.
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index ec00f26bffa4..b657f1719af0 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -48,8 +48,6 @@ void show_mem(void)
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-
 	for_each_online_node(node) {
 		pg_data_t *n = NODE_DATA(node);
 		struct page *map = n->node_mem_map - n->node_start_pfn;
diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c
index 500c9610ab30..e0f19ab91163 100644
--- a/arch/arm/mm/pgd.c
+++ b/arch/arm/mm/pgd.c
@@ -75,7 +75,7 @@ no_pgd:
 void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
 {
 	pmd_t *pmd;
-	struct page *pte;
+	pgtable_t pte;
 
 	if (!pgd)
 		return;
@@ -90,10 +90,8 @@ void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd)
 		goto free;
 	}
 
-	pte = pmd_page(*pmd);
+	pte = pmd_pgtable(*pmd);
 	pmd_clear(pmd);
-	dec_zone_page_state(virt_to_page((unsigned long *)pgd), NR_PAGETABLE);
-	pte_lock_deinit(pte);
 	pte_free(mm, pte);
 	pmd_free(mm, pmd);
 free:
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index 700c04d6996e..32fd7ea533f2 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -478,6 +478,7 @@ arm1020_processor_functions:
 	.word	cpu_arm1020_dcache_clean_area
 	.word	cpu_arm1020_switch_mm
 	.word	cpu_arm1020_set_pte_ext
+	.word	pabort_noifar
 	.size	arm1020_processor_functions, . - arm1020_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 1cc206ab5eae..fe2b0ae70274 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -459,6 +459,7 @@ arm1020e_processor_functions:
 	.word	cpu_arm1020e_dcache_clean_area
 	.word	cpu_arm1020e_switch_mm
 	.word	cpu_arm1020e_set_pte_ext
+	.word	pabort_noifar
 	.size	arm1020e_processor_functions, . - arm1020e_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index aff0ea08e2f8..06dde678e19d 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -442,6 +442,7 @@ arm1022_processor_functions:
 	.word	cpu_arm1022_dcache_clean_area
 	.word	cpu_arm1022_switch_mm
 	.word	cpu_arm1022_set_pte_ext
+	.word	pabort_noifar
 	.size	arm1022_processor_functions, . - arm1022_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 65e43a109085..f5506e6e681e 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -437,6 +437,7 @@ arm1026_processor_functions:
 	.word	cpu_arm1026_dcache_clean_area
 	.word	cpu_arm1026_switch_mm
 	.word	cpu_arm1026_set_pte_ext
+	.word	pabort_noifar
 	.size	arm1026_processor_functions, . - arm1026_processor_functions
 
 	.section .rodata
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 123a7dc7a433..14b6a95c8d45 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -300,6 +300,7 @@ ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_dcache_clean_area
 		.word	cpu_arm6_switch_mm
 		.word	cpu_arm6_set_pte_ext
+		.word	pabort_noifar
 		.size	arm6_processor_functions, . - arm6_processor_functions
 
 /*
@@ -316,6 +317,7 @@ ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_dcache_clean_area
 		.word	cpu_arm7_switch_mm
 		.word	cpu_arm7_set_pte_ext
+		.word	pabort_noifar
 		.size	arm7_processor_functions, . - arm7_processor_functions
 
 		.section ".rodata"
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index dc763be43362..ca5e7aac2da7 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -205,6 +205,7 @@ ENTRY(arm720_processor_functions)
 		.word	cpu_arm720_dcache_clean_area
 		.word	cpu_arm720_switch_mm
 		.word	cpu_arm720_set_pte_ext
+		.word	pabort_noifar
 		.size	arm720_processor_functions, . - arm720_processor_functions
 
 		.section ".rodata"
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 75c945ed6c4d..0170d4f466ea 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -424,6 +424,7 @@ arm920_processor_functions:
 	.word	cpu_arm920_dcache_clean_area
 	.word	cpu_arm920_switch_mm
 	.word	cpu_arm920_set_pte_ext
+	.word	pabort_noifar
 	.size	arm920_processor_functions, . - arm920_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index ffb751b877ff..b7952493d404 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -428,6 +428,7 @@ arm922_processor_functions:
 	.word	cpu_arm922_dcache_clean_area
 	.word	cpu_arm922_switch_mm
 	.word	cpu_arm922_set_pte_ext
+	.word	pabort_noifar
 	.size	arm922_processor_functions, . - arm922_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 44c2c997819f..e2988eba4cf6 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -491,6 +491,7 @@ arm925_processor_functions:
 	.word	cpu_arm925_dcache_clean_area
 	.word	cpu_arm925_switch_mm
 	.word	cpu_arm925_set_pte_ext
+	.word	pabort_noifar
 	.size	arm925_processor_functions, . - arm925_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 194ef48968e6..62f7d1dfe016 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -444,6 +444,7 @@ arm926_processor_functions:
 	.word	cpu_arm926_dcache_clean_area
 	.word	cpu_arm926_switch_mm
 	.word	cpu_arm926_set_pte_ext
+	.word	pabort_noifar
 	.size	arm926_processor_functions, . - arm926_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index fa0dc7e6f0ea..2f169b28e938 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -430,6 +430,7 @@ feroceon_processor_functions:
 	.word	cpu_feroceon_dcache_clean_area
 	.word	cpu_feroceon_switch_mm
 	.word	cpu_feroceon_set_pte_ext
+	.word	pabort_noifar
 	.size	feroceon_processor_functions, . - feroceon_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 6e226e12989f..4db3d6299a2b 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -223,6 +223,7 @@ ENTRY(sa110_processor_functions)
 	.word	cpu_sa110_dcache_clean_area
 	.word	cpu_sa110_switch_mm
 	.word	cpu_sa110_set_pte_ext
+	.word	pabort_noifar
 	.size	sa110_processor_functions, . - sa110_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 9afb11d089fe..3cdef043760f 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -238,6 +238,7 @@ ENTRY(sa1100_processor_functions)
 	.word	cpu_sa1100_dcache_clean_area
 	.word	cpu_sa1100_switch_mm
 	.word	cpu_sa1100_set_pte_ext
+	.word	pabort_noifar
 	.size	sa1100_processor_functions, . - sa1100_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index eb42e5b94863..bf760ea2f789 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -17,10 +17,6 @@
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
-#ifdef CONFIG_SMP
-#include <asm/hardware/arm_scu.h>
-#endif
-
 #include "proc-macros.S"
 
 #define D_CACHE_LINE_SIZE	32
@@ -187,20 +183,10 @@ cpu_v6_name:
  */
 __v6_setup:
 #ifdef CONFIG_SMP
-	/* Set up the SCU on core 0 only */
-	mrc	p15, 0, r0, c0, c0, 5		@ CPU core number
-	ands	r0, r0, #15
-	ldreq	r0, =SCU_BASE
-	ldreq	r5, [r0, #SCU_CTRL]
-	orreq	r5, r5, #1
-	streq	r5, [r0, #SCU_CTRL]
-
-#ifndef CONFIG_CPU_DCACHE_DISABLE
 	mrc	p15, 0, r0, c1, c0, 1		@ Enable SMP/nAMP mode
 	orr	r0, r0, #0x20
 	mcr	p15, 0, r0, c1, c0, 1
 #endif
-#endif
 
 	mov	r0, #0
 	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
@@ -240,6 +226,7 @@ ENTRY(v6_processor_functions)
 	.word	cpu_v6_dcache_clean_area
 	.word	cpu_v6_switch_mm
 	.word	cpu_v6_set_pte_ext
+	.word	pabort_noifar
 	.size	v6_processor_functions, . - v6_processor_functions
 
 	.type	cpu_arch_name, #object
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index e0acc5ae6f6f..a1d7331cd64c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -212,6 +212,7 @@ ENTRY(v7_processor_functions)
 	.word	cpu_v7_dcache_clean_area
 	.word	cpu_v7_switch_mm
 	.word	cpu_v7_set_pte_ext
+	.word	pabort_ifar
 	.size	v7_processor_functions, . - v7_processor_functions
 
 	.type	cpu_arch_name, #object
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index c156ddab9a2d..1a6d89823dff 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -114,6 +114,10 @@ clean_addr:	.word	CLEAN_ADDR
  * Nothing too exciting at the moment
  */
 ENTRY(cpu_xscale_proc_init)
+	@ enable write buffer coalescing. Some bootloader disable it
+	mrc	p15, 0, r1, c1, c0, 1
+	bic	r1, r1, #1
+	mcr	p15, 0, r1, c1, c0, 1
 	mov	pc, lr
 
 /*
@@ -530,6 +534,7 @@ ENTRY(xscale_processor_functions)
 	.word	cpu_xscale_dcache_clean_area
 	.word	cpu_xscale_switch_mm
 	.word	cpu_xscale_set_pte_ext
+	.word	pabort_noifar
 	.size	xscale_processor_functions, . - xscale_processor_functions
 
 	.section ".rodata"
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 2b5aa1135b11..d9bc15a69e5d 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -24,6 +24,7 @@
 #include <asm/hardware.h>
 #include <asm/mach/pci.h>
 #include <asm/hardware/iop3xx.h>
+#include <asm/mach-types.h>
 
 // #define DEBUG
 
@@ -209,8 +210,11 @@ int iop3xx_pci_setup(int nr, struct pci_sys_data *sys)
 	res[1].flags = IORESOURCE_MEM;
 	request_resource(&iomem_resource, &res[1]);
 
-	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - IOP3XX_PCI_LOWER_MEM_BA;
-	sys->io_offset  = IOP3XX_PCI_LOWER_IO_PA - IOP3XX_PCI_LOWER_IO_BA;
+	/*
+	 * Use whatever translation is already setup.
+	 */
+	sys->mem_offset = IOP3XX_PCI_LOWER_MEM_PA - *IOP3XX_OMWTVR0;
+	sys->io_offset  = IOP3XX_PCI_LOWER_IO_PA - *IOP3XX_OIOWTVR;
 
 	sys->resource[0] = &res[0];
 	sys->resource[1] = &res[1];
@@ -250,11 +254,11 @@ void __init iop3xx_atu_setup(void)
 	*IOP3XX_IATVR2 = PHYS_OFFSET;
 
 	/* Outbound window 0 */
-	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_PA;
+	*IOP3XX_OMWTVR0 = IOP3XX_PCI_LOWER_MEM_BA;
 	*IOP3XX_OUMWTVR0 = 0;
 
 	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_PA + IOP3XX_PCI_MEM_WINDOW_SIZE;
+	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
 	*IOP3XX_OUMWTVR1 = 0;
 
 	/* BAR 3 ( Disabled ) */
@@ -265,7 +269,7 @@ void __init iop3xx_atu_setup(void)
 
 	/* Setup the I/O Bar
 	 */
-	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_PA;;
+	*IOP3XX_OIOWTVR = IOP3XX_PCI_LOWER_IO_BA;
 
 	/* Enable inbound and outbound cycles
 	 */
@@ -322,34 +326,59 @@ void __init iop3xx_atu_disable(void)
 /* Flag to determine whether the ATU is initialized and the PCI bus scanned */
 int init_atu;
 
-void __init iop3xx_pci_preinit(void)
+int iop3xx_get_init_atu(void) {
+	/* check if default has been overridden */
+	if (init_atu != IOP3XX_INIT_ATU_DEFAULT)
+		return init_atu;
+	else
+		return IOP3XX_INIT_ATU_DISABLE;
+}
+
+static void __init iop3xx_atu_debug(void)
 {
-	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
-		iop3xx_atu_disable();
-		iop3xx_atu_setup();
-	}
+	DBG("PCI: Intel IOP3xx PCI init.\n");
+	DBG("PCI: Outbound memory window 0: PCI 0x%08x%08x\n",
+		*IOP3XX_OUMWTVR0, *IOP3XX_OMWTVR0);
+	DBG("PCI: Outbound memory window 1: PCI 0x%08x%08x\n",
+		*IOP3XX_OUMWTVR1, *IOP3XX_OMWTVR1);
+	DBG("PCI: Outbound IO window: PCI 0x%08x\n",
+		*IOP3XX_OIOWTVR);
+
+	DBG("PCI: Inbound memory window 0: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		*IOP3XX_IAUBAR0, *IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
+	DBG("PCI: Inbound memory window 1: PCI 0x%08x%08x 0x%08x\n",
+		*IOP3XX_IAUBAR1, *IOP3XX_IABAR1, *IOP3XX_IALR1);
+	DBG("PCI: Inbound memory window 2: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		*IOP3XX_IAUBAR2, *IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
+	DBG("PCI: Inbound memory window 3: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		*IOP3XX_IAUBAR3, *IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
+
+	DBG("PCI: Expansion ROM window: PCI 0x%08x%08x 0x%08x -> 0x%08x\n",
+		0, *IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
 
-	DBG("PCI:  Intel 803xx PCI init code.\n");
 	DBG("ATU: IOP3XX_ATUCMD=0x%04x\n", *IOP3XX_ATUCMD);
-	DBG("ATU: IOP3XX_OMWTVR0=0x%04x, IOP3XX_OIOWTVR=0x%04x\n",
-			*IOP3XX_OMWTVR0,
-			*IOP3XX_OIOWTVR);
 	DBG("ATU: IOP3XX_ATUCR=0x%08x\n", *IOP3XX_ATUCR);
-	DBG("ATU: IOP3XX_IABAR0=0x%08x IOP3XX_IALR0=0x%08x IOP3XX_IATVR0=%08x\n",
-			*IOP3XX_IABAR0, *IOP3XX_IALR0, *IOP3XX_IATVR0);
-	DBG("ATU: IOP3XX_OMWTVR0=0x%08x\n", *IOP3XX_OMWTVR0);
-	DBG("ATU: IOP3XX_IABAR1=0x%08x IOP3XX_IALR1=0x%08x\n",
-			*IOP3XX_IABAR1, *IOP3XX_IALR1);
-	DBG("ATU: IOP3XX_ERBAR=0x%08x IOP3XX_ERLR=0x%08x IOP3XX_ERTVR=%08x\n",
-			*IOP3XX_ERBAR, *IOP3XX_ERLR, *IOP3XX_ERTVR);
-	DBG("ATU: IOP3XX_IABAR2=0x%08x IOP3XX_IALR2=0x%08x IOP3XX_IATVR2=%08x\n",
-			*IOP3XX_IABAR2, *IOP3XX_IALR2, *IOP3XX_IATVR2);
-	DBG("ATU: IOP3XX_IABAR3=0x%08x IOP3XX_IALR3=0x%08x IOP3XX_IATVR3=%08x\n",
-			*IOP3XX_IABAR3, *IOP3XX_IALR3, *IOP3XX_IATVR3);
 
 	hook_fault_code(16+6, iop3xx_pci_abort, SIGBUS, "imprecise external abort");
 }
 
+/* for platforms that might be host-bus-adapters */
+void __init iop3xx_pci_preinit_cond(void)
+{
+	if (iop3xx_get_init_atu() == IOP3XX_INIT_ATU_ENABLE) {
+		iop3xx_atu_disable();
+		iop3xx_atu_setup();
+		iop3xx_atu_debug();
+	}
+}
+
+void __init iop3xx_pci_preinit(void)
+{
+	iop3xx_atu_disable();
+	iop3xx_atu_setup();
+	iop3xx_atu_debug();
+}
+
 /* allow init_atu to be user overridden */
 static int __init iop3xx_init_atu_setup(char *str)
 {
@@ -371,7 +400,7 @@ static int __init iop3xx_init_atu_setup(char *str)
 			default:
 				printk(KERN_DEBUG "\"%s\" malformed at "
 					    "character: \'%c\'",
-					    __FUNCTION__,
+					    __func__,
 					    *str);
 				*(str + 1) = '\0';
 			}
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 03a65c0dfb60..bb6e12738fb3 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -4,7 +4,7 @@ menu "Freescale MXC Implementations"
 
 choice
 	prompt "MXC/iMX System Type"
-	default 0
+	default ARCH_MX3
 
 config ARCH_MX3
 	bool "MX3-based"
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index 66ad9c2b6d64..f96dc0362068 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -4,7 +4,3 @@
 
 # Common support
 obj-y := irq.o
-
-obj-m :=
-obj-n :=
-obj-  :=
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 87d253bc3d3c..2ad5a6917b3f 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,21 +19,13 @@
 #include <asm/mach/irq.h>
 #include <asm/arch/common.h>
 
-/*!
- * Disable interrupt number "irq" in the AVIC
- *
- * @param  irq          interrupt source number
- */
+/* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
 	__raw_writel(irq, AVIC_INTDISNUM);
 }
 
-/*!
- * Enable interrupt number "irq" in the AVIC
- *
- * @param  irq          interrupt source number
- */
+/* Enable interrupt number "irq" in the AVIC */
 static void mxc_unmask_irq(unsigned int irq)
 {
 	__raw_writel(irq, AVIC_INTENNUM);
@@ -45,7 +37,7 @@ static struct irq_chip mxc_avic_chip = {
 	.unmask = mxc_unmask_irq,
 };
 
-/*!
+/*
  * This function initializes the AVIC hardware and disables all the
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index c1f7e5a819a3..b917206ee906 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -11,7 +11,6 @@ choice
 
 config ARCH_OMAP1
 	bool "TI OMAP1"
-	select GENERIC_CLOCKEVENTS
 
 config ARCH_OMAP2
 	bool "TI OMAP2"
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index ce17df31b845..bc639a30d6d1 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -9,14 +9,17 @@ obj-m :=
 obj-n :=
 obj-  :=
 
-obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
-
 # OCPI interconnect support for 1710, 1610 and 5912
 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 
+obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
 obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
 obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
 obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
 obj-$(CONFIG_I2C_OMAP) += i2c.o
+
+# OMAP mailbox framework
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
+
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 0a603242f367..72d34a23a2ec 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -23,7 +23,6 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
-#include <asm/semaphore.h>
 
 #include <asm/arch/clock.h>
 
@@ -304,6 +303,23 @@ void propagate_rate(struct clk * tclk)
 	}
 }
 
+/**
+ * recalculate_root_clocks - recalculate and propagate all root clocks
+ *
+ * Recalculates all root clocks (clocks with no parent), which if the
+ * clock's .recalc is set correctly, should also propagate their rates.
+ * Called at init.
+ */
+void recalculate_root_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		if (unlikely(!clkp->parent) && likely((u32)clkp->recalc))
+			clkp->recalc(clkp);
+	}
+}
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -358,6 +374,30 @@ void clk_allow_idle(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_allow_idle);
 
+void clk_enable_init_clocks(void)
+{
+	struct clk *clkp;
+
+	list_for_each_entry(clkp, &clocks, node) {
+		if (clkp->flags & ENABLE_ON_INIT)
+			clk_enable(clkp);
+	}
+}
+EXPORT_SYMBOL(clk_enable_init_clocks);
+
+#ifdef CONFIG_CPU_FREQ
+void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_init_cpufreq_table)
+		arch_clock->clk_init_cpufreq_table(table);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
+EXPORT_SYMBOL(clk_init_cpufreq_table);
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
@@ -396,3 +436,4 @@ int __init clk_init(struct clk_functions * custom_clocks)
 
 	return 0;
 }
+
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 4f0f9c4e938e..bd1cef2c3c14 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -27,11 +27,16 @@
 #include <asm/setup.h>
 
 #include <asm/arch/board.h>
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 
 #include <asm/arch/clock.h>
 
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+# include "../mach-omap2/sdrc.h"
+#endif
+
 #define NO_LENGTH_CHECK 0xffffffff
 
 unsigned char omap_bootloader_tag[512];
@@ -171,8 +176,8 @@ console_initcall(omap_add_serial_console);
 
 #if defined(CONFIG_ARCH_OMAP16XX)
 #define TIMER_32K_SYNCHRONIZED		0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX)
-#define TIMER_32K_SYNCHRONIZED		(OMAP24XX_32KSYNCT_BASE + 0x10)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#define TIMER_32K_SYNCHRONIZED		(OMAP2_32KSYNCT_BASE + 0x10)
 #endif
 
 #ifdef	TIMER_32K_SYNCHRONIZED
@@ -193,12 +198,35 @@ static struct clocksource clocksource_32k = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Rounds down to nearest nsec.
+ */
+unsigned long long omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
+{
+	return cyc2ns(&clocksource_32k, ticks_32k);
+}
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+	return omap_32k_ticks_to_nsecs(omap_32k_read());
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
 			"%s: can't register clocksource!\n";
 
-	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
+		struct clk *sync_32k_ick;
+
+		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (sync_32k_ick)
+			clk_enable(sync_32k_ick);
+
 		clocksource_32k.mult = clocksource_hz2mult(32768,
 					    clocksource_32k.shift);
 
@@ -210,3 +238,33 @@ static int __init omap_init_clocksource_32k(void)
 arch_initcall(omap_init_clocksource_32k);
 
 #endif	/* TIMER_32K_SYNCHRONIZED */
+
+/* Global address base setup code */
+
+#if defined(CONFIG_ARCH_OMAP2420)
+void __init omap2_set_globals_242x(void)
+{
+	omap2_sdrc_base = OMAP2420_SDRC_BASE;
+	omap2_sms_base = OMAP2420_SMS_BASE;
+	omap_ctrl_base_set(OMAP2420_CTRL_BASE);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+void __init omap2_set_globals_243x(void)
+{
+	omap2_sdrc_base = OMAP243X_SDRC_BASE;
+	omap2_sms_base = OMAP243X_SMS_BASE;
+	omap_ctrl_base_set(OMAP243X_CTRL_BASE);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3430)
+void __init omap2_set_globals_343x(void)
+{
+	omap2_sdrc_base = OMAP343X_SDRC_BASE;
+	omap2_sms_base = OMAP343X_SMS_BASE;
+	omap_ctrl_base_set(OMAP343X_CTRL_BASE);
+}
+#endif
+
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index c0d63b0c61c9..d719c15daa55 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -33,43 +33,33 @@
 #define MPU_CLK		"virt_prcm_set"
 #endif
 
+static struct clk *mpu_clk;
+
 /* TODO: Add support for SDRAM timing changes */
 
 int omap_verify_speed(struct cpufreq_policy *policy)
 {
-	struct clk * mpu_clk;
-
 	if (policy->cpu)
 		return -EINVAL;
 
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
-	mpu_clk = clk_get(NULL, MPU_CLK);
-	if (IS_ERR(mpu_clk))
-		return PTR_ERR(mpu_clk);
+
 	policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
 	policy->max = clk_round_rate(mpu_clk, policy->max * 1000) / 1000;
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
-	clk_put(mpu_clk);
-
 	return 0;
 }
 
 unsigned int omap_getspeed(unsigned int cpu)
 {
-	struct clk * mpu_clk;
 	unsigned long rate;
 
 	if (cpu)
 		return 0;
 
-	mpu_clk = clk_get(NULL, MPU_CLK);
-	if (IS_ERR(mpu_clk))
-		return 0;
 	rate = clk_get_rate(mpu_clk) / 1000;
-	clk_put(mpu_clk);
-
 	return rate;
 }
 
@@ -77,14 +67,9 @@ static int omap_target(struct cpufreq_policy *policy,
 		       unsigned int target_freq,
 		       unsigned int relation)
 {
-	struct clk * mpu_clk;
 	struct cpufreq_freqs freqs;
 	int ret = 0;
 
-	mpu_clk = clk_get(NULL, MPU_CLK);
-	if (IS_ERR(mpu_clk))
-		return PTR_ERR(mpu_clk);
-
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
 	freqs.cpu = 0;
@@ -92,15 +77,12 @@ static int omap_target(struct cpufreq_policy *policy,
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	ret = clk_set_rate(mpu_clk, target_freq * 1000);
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-	clk_put(mpu_clk);
 
 	return ret;
 }
 
 static int __init omap_cpu_init(struct cpufreq_policy *policy)
 {
-	struct clk * mpu_clk;
-
 	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
@@ -111,17 +93,23 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 	policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
 	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	clk_put(mpu_clk);
 
 	return 0;
 }
 
+static int omap_cpu_exit(struct cpufreq_policy *policy)
+{
+	clk_put(mpu_clk);
+	return 0;
+}
+
 static struct cpufreq_driver omap_driver = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= omap_verify_speed,
 	.target		= omap_target,
 	.get		= omap_getspeed,
 	.init		= omap_cpu_init,
+	.exit		= omap_cpu_exit,
 	.name		= "omap",
 };
 
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index c5dab1d6417e..4a53f9ba6c43 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -89,68 +89,6 @@ static inline void omap_init_dsp(void) { }
 #endif	/* CONFIG_OMAP_DSP */
 
 /*-------------------------------------------------------------------------*/
-#if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-
-#define	OMAP1_I2C_BASE		0xfffb3800
-#define OMAP2_I2C_BASE1		0x48070000
-#define OMAP_I2C_SIZE		0x3f
-#define OMAP1_I2C_INT		INT_I2C
-#define OMAP2_I2C_INT1		56
-
-static struct resource i2c_resources1[] = {
-	{
-		.start		= 0,
-		.end		= 0,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= 0,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-/* DMA not used; works around erratum writing to non-empty i2c fifo */
-
-static struct platform_device omap_i2c_device1 = {
-	.name           = "i2c_omap",
-	.id             = 1,
-	.num_resources	= ARRAY_SIZE(i2c_resources1),
-	.resource	= i2c_resources1,
-};
-
-/* See also arch/arm/mach-omap2/devices.c for second I2C on 24xx */
-static void omap_init_i2c(void)
-{
-	if (cpu_is_omap24xx()) {
-		i2c_resources1[0].start = OMAP2_I2C_BASE1;
-		i2c_resources1[0].end = OMAP2_I2C_BASE1 + OMAP_I2C_SIZE;
-		i2c_resources1[1].start = OMAP2_I2C_INT1;
-	} else {
-		i2c_resources1[0].start = OMAP1_I2C_BASE;
-		i2c_resources1[0].end = OMAP1_I2C_BASE + OMAP_I2C_SIZE;
-		i2c_resources1[1].start = OMAP1_I2C_INT;
-	}
-
-	/* FIXME define and use a boot tag, in case of boards that
-	 * either don't wire up I2C, or chips that mux it differently...
-	 * it can include clocking and address info, maybe more.
-	 */
-	if (cpu_is_omap24xx()) {
-		omap_cfg_reg(M19_24XX_I2C1_SCL);
-		omap_cfg_reg(L15_24XX_I2C1_SDA);
-	} else {
-		omap_cfg_reg(I2C_SCL);
-		omap_cfg_reg(I2C_SDA);
-	}
-
-	(void) platform_device_register(&omap_i2c_device1);
-}
-
-#else
-static inline void omap_init_i2c(void) {}
-#endif
-
-/*-------------------------------------------------------------------------*/
 #if	defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
 
 static void omap_init_kp(void)
@@ -501,7 +439,6 @@ static int __init omap_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_dsp();
-	omap_init_i2c();
 	omap_init_kp();
 	omap_init_mmc();
 	omap_init_uwire();
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index a46676db8113..793740686be2 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -137,7 +137,7 @@ static void omap_disable_channel_irq(int lch);
 static inline void omap_enable_channel_irq(int lch);
 
 #define REVISIT_24XX()		printk(KERN_ERR "FIXME: no %s on 24xx\n", \
-						__FUNCTION__);
+						__func__);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
@@ -699,7 +699,7 @@ omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
 	u32 reg;
 
 	if (!cpu_class_is_omap2()) {
-		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __FUNCTION__);
+		printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
 		return;
 	}
 
@@ -1020,12 +1020,12 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
 	}
 
 	w = OMAP_DMA_CLNK_CTRL_REG(lch_head);
-	w &= ~(0x0f);
+	w &= ~(0x1f);
 	w |= lch_queue;
 	OMAP_DMA_CLNK_CTRL_REG(lch_head) = w;
 
 	w = OMAP_DMA_CLNK_CTRL_REG(lch_queue);
-	w &= ~(0x0f);
+	w &= ~(0x1f);
 	w |= (dma_chan[lch_queue].next_linked_ch);
 	OMAP_DMA_CLNK_CTRL_REG(lch_queue) = w;
 }
@@ -1248,7 +1248,7 @@ EXPORT_SYMBOL(omap_dma_chain_status);
  * @param frame_count
  * @param callbk_data - channel callback parameter data.
  *
- * @return  - Success : start_dma status
+ * @return  - Success : 0
  * 	      Failure: -EINVAL/-EBUSY
  */
 int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
@@ -1367,7 +1367,7 @@ int omap_dma_chain_a_transfer(int chain_id, int src_start, int dest_start,
 			dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
 		}
 	}
-	return start_dma;
+	return 0;
 }
 EXPORT_SYMBOL(omap_dma_chain_a_transfer);
 
@@ -1663,6 +1663,7 @@ static int omap2_dma_handle_ch(int ch)
 	if (!status) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Spurious DMA IRQ for lch %d\n", ch);
+		omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
 		return 0;
 	}
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
@@ -1705,14 +1706,8 @@ static int omap2_dma_handle_ch(int ch)
 		status = OMAP_DMA_CSR_REG(ch);
 	}
 
-	if (likely(dma_chan[ch].callback != NULL)) {
-		if (dma_chan[ch].chain_id != -1)
-			dma_chan[ch].callback(dma_chan[ch].chain_id, status,
-					      dma_chan[ch].data);
-		else
-			dma_chan[ch].callback(ch, status, dma_chan[ch].data);
-
-	}
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, status, dma_chan[ch].data);
 
 	OMAP_DMA_CSR_REG(ch) = status;
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index e719d0eeb5c8..302ad8dff2cb 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -268,7 +268,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 	if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
 		spin_unlock_irqrestore(&dm_timer_lock, flags);
 		printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
-		       __FILE__, __LINE__, __FUNCTION__, id);
+		       __FILE__, __LINE__, __func__, id);
 		dump_stack();
 		return NULL;
 	}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 56f4d1394d56..1903a3491ee9 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -136,7 +136,6 @@ struct gpio_bank {
 	u16 irq;
 	u16 virtual_irq_start;
 	int method;
-	u32 reserved_map;
 #if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	u32 suspend_wakeup;
 	u32 saved_wakeup;
@@ -149,7 +148,9 @@ struct gpio_bank {
 	u32 saved_fallingdetect;
 	u32 saved_risingdetect;
 #endif
+	u32 level_mask;
 	spinlock_t lock;
+	struct gpio_chip chip;
 };
 
 #define METHOD_MPUIO		0
@@ -333,13 +334,14 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 void omap_set_gpio_direction(int gpio, int is_input)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
@@ -406,13 +408,14 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 void omap_set_gpio_dataout(int gpio, int enable)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	_set_gpio_dataout(bank, get_gpio_index(gpio), enable);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 }
 
 int omap_get_gpio_datain(int gpio)
@@ -536,10 +539,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
 	}
 
-	/*
-	 * FIXME: Possibly do 'set_irq_handler(j, handle_level_irq)' if only
-	 * level triggering requested.
-	 */
+	bank->level_mask =
+		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
+		__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
 }
 #endif
 
@@ -624,6 +626,7 @@ static int gpio_irq_type(unsigned irq, unsigned type)
 	struct gpio_bank *bank;
 	unsigned gpio;
 	int retval;
+	unsigned long flags;
 
 	if (!cpu_class_is_omap2() && irq > IH_MPUIO_BASE)
 		gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
@@ -642,13 +645,19 @@ static int gpio_irq_type(unsigned irq, unsigned type)
 		return -EINVAL;
 
 	bank = get_irq_chip_data(irq);
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
 	if (retval == 0) {
 		irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
 		irq_desc[irq].status |= type;
 	}
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+		__set_irq_handler_unlocked(irq, handle_level_irq);
+	else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
+		__set_irq_handler_unlocked(irq, handle_edge_irq);
+
 	return retval;
 }
 
@@ -830,11 +839,13 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
  */
 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 {
+	unsigned long flags;
+
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
 	case METHOD_MPUIO:
 	case METHOD_GPIO_1610:
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		if (enable) {
 			bank->suspend_wakeup |= (1 << gpio);
 			enable_irq_wake(bank->irq);
@@ -842,7 +853,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 			disable_irq_wake(bank->irq);
 			bank->suspend_wakeup &= ~(1 << gpio);
 		}
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -853,7 +864,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 					(bank - gpio_bank) * 32 + gpio);
 			return -EINVAL;
 		}
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		if (enable) {
 			bank->suspend_wakeup |= (1 << gpio);
 			enable_irq_wake(bank->irq);
@@ -861,7 +872,7 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 			disable_irq_wake(bank->irq);
 			bank->suspend_wakeup &= ~(1 << gpio);
 		}
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 		return 0;
 #endif
 	default:
@@ -897,19 +908,18 @@ static int gpio_wake_enable(unsigned int irq, unsigned int enable)
 int omap_request_gpio(int gpio)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
+	int status;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
 
+	status = gpio_request(gpio, NULL);
+	if (status < 0)
+		return status;
+
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
-	if (unlikely(bank->reserved_map & (1 << get_gpio_index(gpio)))) {
-		printk(KERN_ERR "omap-gpio: GPIO %d is already reserved!\n", gpio);
-		dump_stack();
-		spin_unlock(&bank->lock);
-		return -1;
-	}
-	bank->reserved_map |= (1 << get_gpio_index(gpio));
+	spin_lock_irqsave(&bank->lock, flags);
 
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
@@ -925,7 +935,7 @@ int omap_request_gpio(int gpio)
 		__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
 	}
 #endif
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
@@ -933,15 +943,17 @@ int omap_request_gpio(int gpio)
 void omap_free_gpio(int gpio)
 {
 	struct gpio_bank *bank;
+	unsigned long flags;
 
 	if (check_gpio(gpio) < 0)
 		return;
 	bank = get_gpio_bank(gpio);
-	spin_lock(&bank->lock);
-	if (unlikely(!(bank->reserved_map & (1 << get_gpio_index(gpio))))) {
+	spin_lock_irqsave(&bank->lock, flags);
+	if (unlikely(!gpiochip_is_requested(&bank->chip,
+				get_gpio_index(gpio)))) {
+		spin_unlock_irqrestore(&bank->lock, flags);
 		printk(KERN_ERR "omap-gpio: GPIO %d wasn't reserved!\n", gpio);
 		dump_stack();
-		spin_unlock(&bank->lock);
 		return;
 	}
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -958,9 +970,9 @@ void omap_free_gpio(int gpio)
 		__raw_writel(1 << get_gpio_index(gpio), reg);
 	}
 #endif
-	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
 	_reset_gpio(bank, gpio);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	gpio_free(gpio);
 }
 
 /*
@@ -1015,12 +1027,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 			isr &= 0x0000ffff;
 
 		if (cpu_class_is_omap2()) {
-			level_mask =
-				__raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT0) |
-				__raw_readl(bank->base +
-					OMAP24XX_GPIO_LEVELDETECT1);
-			level_mask &= enabled;
+			level_mask = bank->level_mask & enabled;
 		}
 
 		/* clear edge sensitive interrupts before handler(s) are
@@ -1045,51 +1052,13 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
 			struct irq_desc *d;
-			int irq_mask;
+
 			if (!(isr & 1))
 				continue;
 			d = irq_desc + gpio_irq;
-			/* Don't run the handler if it's already running
-			 * or was disabled lazely.
-			 */
-			if (unlikely((d->depth ||
-				      (d->status & IRQ_INPROGRESS)))) {
-				irq_mask = 1 <<
-					(gpio_irq - bank->virtual_irq_start);
-				/* The unmasking will be done by
-				 * enable_irq in case it is disabled or
-				 * after returning from the handler if
-				 * it's already running.
-				 */
-				_enable_gpio_irqbank(bank, irq_mask, 0);
-				if (!d->depth) {
-					/* Level triggered interrupts
-					 * won't ever be reentered
-					 */
-					BUG_ON(level_mask & irq_mask);
-					d->status |= IRQ_PENDING;
-				}
-				continue;
-			}
 
 			desc_handle_irq(gpio_irq, d);
-
-			if (unlikely((d->status & IRQ_PENDING) && !d->depth)) {
-				irq_mask = 1 <<
-					(gpio_irq - bank->virtual_irq_start);
-				d->status &= ~IRQ_PENDING;
-				_enable_gpio_irqbank(bank, irq_mask, 1);
-				retrigger |= irq_mask;
-			}
 		}
-
-		if (cpu_class_is_omap2()) {
-			/* clear level sensitive interrupts after handler(s) */
-			_enable_gpio_irqbank(bank, isr_saved & level_mask, 0);
-			_clear_gpio_irqbank(bank, isr_saved & level_mask);
-			_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
-		}
-
 	}
 	/* if bank has any level sensitive GPIO pin interrupt
 	configured, we must unmask the bank interrupt only after
@@ -1127,10 +1096,17 @@ static void gpio_mask_irq(unsigned int irq)
 static void gpio_unmask_irq(unsigned int irq)
 {
 	unsigned int gpio = irq - IH_GPIO_BASE;
-	unsigned int gpio_idx = get_gpio_index(gpio);
 	struct gpio_bank *bank = get_irq_chip_data(irq);
+	unsigned int irq_mask = 1 << get_gpio_index(gpio);
 
-	_set_gpio_irqenable(bank, gpio_idx, 1);
+	/* For level-triggered GPIOs, the clearing must be done after
+	 * the HW source is cleared, thus after the handler has run */
+	if (bank->level_mask & irq_mask) {
+		_set_gpio_irqenable(bank, gpio, 0);
+		_clear_gpio_irqstatus(bank, gpio);
+	}
+
+	_set_gpio_irqenable(bank, gpio, 1);
 }
 
 static struct irq_chip gpio_irq_chip = {
@@ -1194,11 +1170,12 @@ static int omap_mpuio_suspend_late(struct platform_device *pdev, pm_message_t me
 {
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	unsigned long		flags;
 
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	bank->saved_wakeup = __raw_readl(mask_reg);
 	__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
@@ -1207,10 +1184,11 @@ static int omap_mpuio_resume_early(struct platform_device *pdev)
 {
 	struct gpio_bank	*bank = platform_get_drvdata(pdev);
 	void __iomem		*mask_reg = bank->base + OMAP_MPUIO_GPIO_MASKIT;
+	unsigned long		flags;
 
-	spin_lock(&bank->lock);
+	spin_lock_irqsave(&bank->lock, flags);
 	__raw_writel(bank->saved_wakeup, mask_reg);
-	spin_unlock(&bank->lock);
+	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
 }
@@ -1258,6 +1236,53 @@ static inline void mpuio_init(void) {}
 
 /*---------------------------------------------------------------------*/
 
+/* REVISIT these are stupid implementations!  replace by ones that
+ * don't switch on METHOD_* and which mostly avoid spinlocks
+ */
+
+static int gpio_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_direction(bank, offset, 1);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static int gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	return omap_get_gpio_datain(chip->base + offset);
+}
+
+static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	_set_gpio_direction(bank, offset, 0);
+	spin_unlock_irqrestore(&bank->lock, flags);
+	return 0;
+}
+
+static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_dataout(bank, offset, value);
+	spin_unlock_irqrestore(&bank->lock, flags);
+}
+
+/*---------------------------------------------------------------------*/
+
 static int initialized;
 #if !defined(CONFIG_ARCH_OMAP3)
 static struct clk * gpio_ick;
@@ -1277,9 +1302,15 @@ static struct clk *gpio_fclks[OMAP34XX_NR_GPIOS];
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
+/* This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 static int __init _omap_gpio_init(void)
 {
 	int i;
+	int gpio = 0;
 	struct gpio_bank *bank;
 #if defined(CONFIG_ARCH_OMAP3)
 	char clk_name[11];
@@ -1410,7 +1441,6 @@ static int __init _omap_gpio_init(void)
 		int j, gpio_count = 16;
 
 		bank = &gpio_bank[i];
-		bank->reserved_map = 0;
 		bank->base = IO_ADDRESS(bank->base);
 		spin_lock_init(&bank->lock);
 		if (bank_is_mpuio(bank))
@@ -1448,8 +1478,29 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32;
 		}
 #endif
+
+		/* REVISIT eventually switch from OMAP-specific gpio structs
+		 * over to the generic ones
+		 */
+		bank->chip.direction_input = gpio_input;
+		bank->chip.get = gpio_get;
+		bank->chip.direction_output = gpio_output;
+		bank->chip.set = gpio_set;
+		if (bank_is_mpuio(bank)) {
+			bank->chip.label = "mpuio";
+			bank->chip.base = OMAP_MPUIO(0);
+		} else {
+			bank->chip.label = "gpio";
+			bank->chip.base = gpio;
+			gpio += gpio_count;
+		}
+		bank->chip.ngpio = gpio_count;
+
+		gpiochip_add(&bank->chip);
+
 		for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + gpio_count; j++) {
+			lockdep_set_class(&irq_desc[j].lock, &gpio_lock_class);
 			set_irq_chip_data(j, bank);
 			if (bank_is_mpuio(bank))
 				set_irq_chip(j, &mpuio_irq_chip);
@@ -1489,6 +1540,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 		void __iomem *wake_status;
 		void __iomem *wake_clear;
 		void __iomem *wake_set;
+		unsigned long flags;
 
 		switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1509,11 +1561,11 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
 			continue;
 		}
 
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		bank->saved_wakeup = __raw_readl(wake_status);
 		__raw_writel(0xffffffff, wake_clear);
 		__raw_writel(bank->suspend_wakeup, wake_set);
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 	}
 
 	return 0;
@@ -1530,6 +1582,7 @@ static int omap_gpio_resume(struct sys_device *dev)
 		struct gpio_bank *bank = &gpio_bank[i];
 		void __iomem *wake_clear;
 		void __iomem *wake_set;
+		unsigned long flags;
 
 		switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1548,10 +1601,10 @@ static int omap_gpio_resume(struct sys_device *dev)
 			continue;
 		}
 
-		spin_lock(&bank->lock);
+		spin_lock_irqsave(&bank->lock, flags);
 		__raw_writel(0xffffffff, wake_clear);
 		__raw_writel(bank->saved_wakeup, wake_set);
-		spin_unlock(&bank->lock);
+		spin_unlock_irqrestore(&bank->lock, flags);
 	}
 
 	return 0;
@@ -1741,8 +1794,10 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
 			unsigned	irq, value, is_in, irqstat;
+			const char	*label;
 
-			if (!(bank->reserved_map & mask))
+			label = gpiochip_is_requested(&bank->chip, j);
+			if (!label)
 				continue;
 
 			irq = bank->virtual_irq_start + j;
@@ -1750,13 +1805,16 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 			is_in = gpio_is_input(bank, mask);
 
 			if (bank_is_mpuio(bank))
-				seq_printf(s, "MPUIO %2d: ", j);
+				seq_printf(s, "MPUIO %2d ", j);
 			else
-				seq_printf(s, "GPIO %3d: ", gpio);
-			seq_printf(s, "%s %s",
+				seq_printf(s, "GPIO %3d ", gpio);
+			seq_printf(s, "(%10s): %s %s",
+					label,
 					is_in ? "in " : "out",
 					value ? "hi"  : "lo");
 
+/* FIXME for at least omap2, show pullup/pulldown state */
+
 			irqstat = irq_desc[irq].status;
 			if (is_in && ((bank->suspend_wakeup & mask)
 					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
@@ -1779,10 +1837,10 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 					trigger = "high";
 					break;
 				case IRQ_TYPE_NONE:
-					trigger = "(unspecified)";
+					trigger = "(?)";
 					break;
 				}
-				seq_printf(s, ", irq-%d %s%s",
+				seq_printf(s, ", irq-%d %-8s%s",
 						irq, trigger,
 						(bank->suspend_wakeup & mask)
 							? " wakeup" : "");
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 75211f20ccb3..6f3f459731c8 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -3,9 +3,9 @@
  *
  * Utility to set the Omap MUX and PULL_DWN registers from a table in mux.h
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -32,21 +32,17 @@
 
 #ifdef CONFIG_OMAP_MUX
 
-#define OMAP24XX_L4_BASE	0x48000000
-#define OMAP24XX_PULL_ENA	(1 << 3)
-#define OMAP24XX_PULL_UP	(1 << 4)
+static struct omap_mux_cfg *mux_cfg;
 
-static struct pin_config * pin_table;
-static unsigned long pin_table_sz;
-
-extern struct pin_config * omap730_pins;
-extern struct pin_config * omap1xxx_pins;
-extern struct pin_config * omap24xx_pins;
-
-int __init omap_mux_register(struct pin_config * pins, unsigned long size)
+int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg)
 {
-	pin_table = pins;
-	pin_table_sz = size;
+	if (!arch_mux_cfg || !arch_mux_cfg->pins || arch_mux_cfg->size == 0
+			|| !arch_mux_cfg->cfg_reg) {
+		printk(KERN_ERR "Invalid pin table\n");
+		return -EINVAL;
+	}
+
+	mux_cfg = arch_mux_cfg;
 
 	return 0;
 }
@@ -56,152 +52,26 @@ int __init omap_mux_register(struct pin_config * pins, unsigned long size)
  */
 int __init_or_module omap_cfg_reg(const unsigned long index)
 {
-	static DEFINE_SPINLOCK(mux_spin_lock);
-
-	unsigned long flags;
-	struct pin_config *cfg;
-	unsigned int reg_orig = 0, reg = 0, pu_pd_orig = 0, pu_pd = 0,
-		pull_orig = 0, pull = 0;
-	unsigned int mask, warn = 0;
+	struct pin_config *reg;
 
-	if (!pin_table)
-		BUG();
+	if (mux_cfg == NULL) {
+		printk(KERN_ERR "Pin mux table not initialized\n");
+		return -ENODEV;
+	}
 
-	if (index >= pin_table_sz) {
+	if (index >= mux_cfg->size) {
 		printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
-		       index, pin_table_sz);
+		       index, mux_cfg->size);
 		dump_stack();
 		return -ENODEV;
 	}
 
-	cfg = (struct pin_config *)&pin_table[index];
-	if (cpu_is_omap24xx()) {
-		u8 reg = 0;
-
-		reg |= cfg->mask & 0x7;
-		if (cfg->pull_val)
-			reg |= OMAP24XX_PULL_ENA;
-		if(cfg->pu_pd_val)
-			reg |= OMAP24XX_PULL_UP;
-#if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
-		{
-			u8 orig = omap_readb(OMAP24XX_L4_BASE + cfg->mux_reg);
-			u8 debug = 0;
-
-#ifdef	CONFIG_OMAP_MUX_DEBUG
-			debug = cfg->debug;
-#endif
-			warn = (orig != reg);
-			if (debug || warn)
-				printk("MUX: setup %s (0x%08x): 0x%02x -> 0x%02x\n",
-						cfg->name,
-						OMAP24XX_L4_BASE + cfg->mux_reg,
-						orig, reg);
-		}
-#endif
-		omap_writeb(reg, OMAP24XX_L4_BASE + cfg->mux_reg);
+	reg = (struct pin_config *)&mux_cfg->pins[index];
 
-		return 0;
-	}
-
-	/* Check the mux register in question */
-	if (cfg->mux_reg) {
-		unsigned	tmp1, tmp2;
-
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		reg_orig = omap_readl(cfg->mux_reg);
-
-		/* The mux registers always seem to be 3 bits long */
-		mask = (0x7 << cfg->mask_offset);
-		tmp1 = reg_orig & mask;
-		reg = reg_orig & ~mask;
-
-		tmp2 = (cfg->mask << cfg->mask_offset);
-		reg |= tmp2;
-
-		if (tmp1 != tmp2)
-			warn = 1;
-
-		omap_writel(reg, cfg->mux_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	/* Check for pull up or pull down selection on 1610 */
-	if (!cpu_is_omap15xx()) {
-		if (cfg->pu_pd_reg && cfg->pull_val) {
-			spin_lock_irqsave(&mux_spin_lock, flags);
-			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
-			mask = 1 << cfg->pull_bit;
-
-			if (cfg->pu_pd_val) {
-				if (!(pu_pd_orig & mask))
-					warn = 1;
-				/* Use pull up */
-				pu_pd = pu_pd_orig | mask;
-			} else {
-				if (pu_pd_orig & mask)
-					warn = 1;
-				/* Use pull down */
-				pu_pd = pu_pd_orig & ~mask;
-			}
-			omap_writel(pu_pd, cfg->pu_pd_reg);
-			spin_unlock_irqrestore(&mux_spin_lock, flags);
-		}
-	}
-
-	/* Check for an associated pull down register */
-	if (cfg->pull_reg) {
-		spin_lock_irqsave(&mux_spin_lock, flags);
-		pull_orig = omap_readl(cfg->pull_reg);
-		mask = 1 << cfg->pull_bit;
-
-		if (cfg->pull_val) {
-			if (pull_orig & mask)
-				warn = 1;
-			/* Low bit = pull enabled */
-			pull = pull_orig & ~mask;
-		} else {
-			if (!(pull_orig & mask))
-				warn = 1;
-			/* High bit = pull disabled */
-			pull = pull_orig | mask;
-		}
-
-		omap_writel(pull, cfg->pull_reg);
-		spin_unlock_irqrestore(&mux_spin_lock, flags);
-	}
-
-	if (warn) {
-#ifdef CONFIG_OMAP_MUX_WARNINGS
-		printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
-#endif
-	}
-
-#ifdef CONFIG_OMAP_MUX_DEBUG
-	if (cfg->debug || warn) {
-		printk("MUX: Setting register %s\n", cfg->name);
-		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
-
-		if (!cpu_is_omap15xx()) {
-			if (cfg->pu_pd_reg && cfg->pull_val) {
-				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-				       cfg->pu_pd_name, cfg->pu_pd_reg,
-				       pu_pd_orig, pu_pd);
-			}
-		}
-
-		if (cfg->pull_reg)
-			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
-			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
-	}
-#endif
+	if (!mux_cfg->cfg_reg)
+		return -ENODEV;
 
-#ifdef CONFIG_OMAP_MUX_ERRORS
-	return warn ? -ETXTBSY : 0;
-#else
-	return 0;
-#endif
+	return mux_cfg->cfg_reg(reg);
 }
 EXPORT_SYMBOL(omap_cfg_reg);
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index a5aedf964b88..a619475c4b76 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,6 +33,7 @@
 #include <asm/system.h>
 #include <asm/hardware.h>
 
+#include <asm/arch/control.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
@@ -76,7 +77,7 @@
 
 /*-------------------------------------------------------------------------*/
 
-#ifdef	CONFIG_ARCH_OMAP_OTG
+#if	defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_USB_MUSB_OTG)
 
 static struct otg_transceiver *xceiv;
 
@@ -110,12 +111,48 @@ EXPORT_SYMBOL(otg_set_transceiver);
 
 #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP15XX)
 
+static void omap2_usb_devconf_clear(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb_devconf_set(u8 port, u32 mask)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(port, mask);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_disable_5pinbitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r &= ~(USBTXWRMODEI(2, USB_BIDIR_TLL) | USBT2TLL5PI);
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
+static void omap2_usb2_enable_5pinunitll(void)
+{
+	u32 r;
+
+	r = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	r |= USBTXWRMODEI(2, USB_UNIDIR_TLL) | USBT2TLL5PI;
+	omap_ctrl_writel(r, OMAP2_CONTROL_DEVCONF0);
+}
+
 static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 {
 	u32	syscon1 = 0;
 
 	if (cpu_is_omap24xx())
-		CONTROL_DEVCONF_REG &= ~USBT0WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_clear(0, USB_BIDIR_TLL);
 
 	if (nwires == 0) {
 		if (cpu_class_is_omap1() && !cpu_is_omap15xx()) {
@@ -187,19 +224,19 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(0, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(0, USB_BIDIR);
 		break;
 	case 6:
 		syscon1 = 3;
 		if (cpu_is_omap24xx()) {
 			omap_cfg_reg(J19_24XX_USB0_VP);
 			omap_cfg_reg(K20_24XX_USB0_VM);
-			CONTROL_DEVCONF_REG |= USBT0WRMODEI(USB_UNIDIR);
+			omap2_usb_devconf_set(0, USB_UNIDIR);
 		} else {
 			omap_cfg_reg(AA9_USB0_VP);
 			omap_cfg_reg(R9_USB0_VM);
@@ -220,7 +257,7 @@ static u32 __init omap_usb1_init(unsigned nwires)
 	if (cpu_class_is_omap1() && !cpu_is_omap15xx() && nwires != 6)
 		USB_TRANSCEIVER_CTRL_REG &= ~CONF_USB1_UNI_R;
 	if (cpu_is_omap24xx())
-		CONTROL_DEVCONF_REG &= ~USBT1WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_clear(1, USB_BIDIR_TLL);
 
 	if (nwires == 0)
 		return 0;
@@ -261,17 +298,17 @@ static u32 __init omap_usb1_init(unsigned nwires)
 		 * this TLL link is not using DP/DM
 		 */
 		syscon1 = 1;
-		CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_set(1, USB_BIDIR_TLL);
 		break;
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(1, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT1WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(1, USB_BIDIR);
 		break;
 	case 6:
 		if (cpu_is_omap24xx())
@@ -295,8 +332,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 	u32	syscon1 = 0;
 
 	if (cpu_is_omap24xx()) {
-		CONTROL_DEVCONF_REG &= ~(USBT2WRMODEI(USB_BIDIR_TLL)
-					| USBT2TLL5PI);
+		omap2_usb2_disable_5pinbitll();
 		alt_pingroup = 0;
 	}
 
@@ -343,17 +379,17 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 		 * this TLL link is not using DP/DM
 		 */
 		syscon1 = 1;
-		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR_TLL);
+		omap2_usb_devconf_set(2, USB_BIDIR_TLL);
 		break;
 	case 3:
 		syscon1 = 2;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(2, USB_BIDIR);
 		break;
 	case 4:
 		syscon1 = 1;
 		if (cpu_is_omap24xx())
-			CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_BIDIR);
+			omap2_usb_devconf_set(2, USB_BIDIR);
 		break;
 	case 5:
 		if (!cpu_is_omap24xx())
@@ -364,8 +400,7 @@ static u32 __init omap_usb2_init(unsigned nwires, unsigned alt_pingroup)
 		 * set up OTG_SYSCON2.HMC_TLL{ATTACH,SPEED}
 		 */
 		syscon1 = 3;
-		CONTROL_DEVCONF_REG |= USBT2WRMODEI(USB_UNIDIR_TLL)
-					| USBT2TLL5PI;
+		omap2_usb2_enable_5pinunitll();
 		break;
 	case 6:
 		if (cpu_is_omap24xx())
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
new file mode 100644
index 000000000000..198f3dde2be3
--- /dev/null
+++ b/arch/arm/plat-orion/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel.
+#
+
+obj-y	:= irq.o pcie.o time.o
+obj-m	:=
+obj-n	:=
+obj-	:=
diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c
new file mode 100644
index 000000000000..c5b669d234bc
--- /dev/null
+++ b/arch/arm/plat-orion/irq.c
@@ -0,0 +1,64 @@
+/*
+ * arch/arm/plat-orion/irq.c
+ *
+ * Marvell Orion SoC IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/plat-orion/irq.h>
+
+static void orion_irq_mask(u32 irq)
+{
+	void __iomem *maskaddr = get_irq_chip_data(irq);
+	u32 mask;
+
+	mask = readl(maskaddr);
+	mask &= ~(1 << (irq & 31));
+	writel(mask, maskaddr);
+}
+
+static void orion_irq_unmask(u32 irq)
+{
+	void __iomem *maskaddr = get_irq_chip_data(irq);
+	u32 mask;
+
+	mask = readl(maskaddr);
+	mask |= 1 << (irq & 31);
+	writel(mask, maskaddr);
+}
+
+static struct irq_chip orion_irq_chip = {
+	.name		= "orion_irq",
+	.ack		= orion_irq_mask,
+	.mask		= orion_irq_mask,
+	.unmask		= orion_irq_unmask,
+};
+
+void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
+{
+	unsigned int i;
+
+	/*
+	 * Mask all interrupts initially.
+	 */
+	writel(0, maskaddr);
+
+	/*
+	 * Register IRQ sources.
+	 */
+	for (i = 0; i < 32; i++) {
+		unsigned int irq = irq_start + i;
+
+		set_irq_chip(irq, &orion_irq_chip);
+		set_irq_chip_data(irq, maskaddr);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
new file mode 100644
index 000000000000..abfda53f1800
--- /dev/null
+++ b/arch/arm/plat-orion/pcie.c
@@ -0,0 +1,245 @@
+/*
+ * arch/arm/plat-orion/pcie.c
+ *
+ * Marvell Orion SoC PCIe handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/plat-orion/pcie.h>
+
+/*
+ * PCIe unit register offsets.
+ */
+#define PCIE_DEV_ID_OFF		0x0000
+#define PCIE_CMD_OFF		0x0004
+#define PCIE_DEV_REV_OFF	0x0008
+#define PCIE_BAR_LO_OFF(n)	(0x0010 + ((n) << 3))
+#define PCIE_BAR_HI_OFF(n)	(0x0014 + ((n) << 3))
+#define PCIE_HEADER_LOG_4_OFF	0x0128
+#define PCIE_BAR_CTRL_OFF(n)	(0x1804 + ((n - 1) * 4))
+#define PCIE_WIN04_CTRL_OFF(n)	(0x1820 + ((n) << 4))
+#define PCIE_WIN04_BASE_OFF(n)	(0x1824 + ((n) << 4))
+#define PCIE_WIN04_REMAP_OFF(n)	(0x182c + ((n) << 4))
+#define PCIE_WIN5_CTRL_OFF	0x1880
+#define PCIE_WIN5_BASE_OFF	0x1884
+#define PCIE_WIN5_REMAP_OFF	0x188c
+#define PCIE_CONF_ADDR_OFF	0x18f8
+#define  PCIE_CONF_ADDR_EN		0x80000000
+#define  PCIE_CONF_REG(r)		((((r) & 0xf00) << 16) | ((r) & 0xfc))
+#define  PCIE_CONF_BUS(b)		(((b) & 0xff) << 16)
+#define  PCIE_CONF_DEV(d)		(((d) & 0x1f) << 11)
+#define  PCIE_CONF_FUNC(f)		(((f) & 0x3) << 8)
+#define PCIE_CONF_DATA_OFF	0x18fc
+#define PCIE_MASK_OFF		0x1910
+#define PCIE_CTRL_OFF		0x1a00
+#define PCIE_STAT_OFF		0x1a04
+#define  PCIE_STAT_DEV_OFFS		20
+#define  PCIE_STAT_DEV_MASK		0x1f
+#define  PCIE_STAT_BUS_OFFS		8
+#define  PCIE_STAT_BUS_MASK		0xff
+#define  PCIE_STAT_LINK_DOWN		1
+
+
+u32 __init orion_pcie_dev_id(void __iomem *base)
+{
+	return readl(base + PCIE_DEV_ID_OFF) >> 16;
+}
+
+u32 __init orion_pcie_rev(void __iomem *base)
+{
+	return readl(base + PCIE_DEV_REV_OFF) & 0xff;
+}
+
+int orion_pcie_link_up(void __iomem *base)
+{
+	return !(readl(base + PCIE_STAT_OFF) & PCIE_STAT_LINK_DOWN);
+}
+
+int orion_pcie_get_local_bus_nr(void __iomem *base)
+{
+	u32 stat = readl(base + PCIE_STAT_OFF);
+
+	return (stat >> PCIE_STAT_BUS_OFFS) & PCIE_STAT_BUS_MASK;
+}
+
+void __init orion_pcie_set_local_bus_nr(void __iomem *base, int nr)
+{
+	u32 stat;
+
+	stat = readl(base + PCIE_STAT_OFF);
+	stat &= ~(PCIE_STAT_BUS_MASK << PCIE_STAT_BUS_OFFS);
+	stat |= nr << PCIE_STAT_BUS_OFFS;
+	writel(stat, base + PCIE_STAT_OFF);
+}
+
+/*
+ * Setup PCIE BARs and Address Decode Wins:
+ * BAR[0,2] -> disabled, BAR[1] -> covers all DRAM banks
+ * WIN[0-3] -> DRAM bank[0-3]
+ */
+static void __init orion_pcie_setup_wins(void __iomem *base,
+					 struct mbus_dram_target_info *dram)
+{
+	u32 size;
+	int i;
+
+	/*
+	 * First, disable and clear BARs and windows.
+	 */
+	for (i = 1; i <= 2; i++) {
+		writel(0, base + PCIE_BAR_CTRL_OFF(i));
+		writel(0, base + PCIE_BAR_LO_OFF(i));
+		writel(0, base + PCIE_BAR_HI_OFF(i));
+	}
+
+	for (i = 0; i < 5; i++) {
+		writel(0, base + PCIE_WIN04_CTRL_OFF(i));
+		writel(0, base + PCIE_WIN04_BASE_OFF(i));
+		writel(0, base + PCIE_WIN04_REMAP_OFF(i));
+	}
+
+	writel(0, base + PCIE_WIN5_CTRL_OFF);
+	writel(0, base + PCIE_WIN5_BASE_OFF);
+	writel(0, base + PCIE_WIN5_REMAP_OFF);
+
+	/*
+	 * Setup windows for DDR banks.  Count total DDR size on the fly.
+	 */
+	size = 0;
+	for (i = 0; i < dram->num_cs; i++) {
+		struct mbus_dram_window *cs = dram->cs + i;
+
+		writel(cs->base & 0xffff0000, base + PCIE_WIN04_BASE_OFF(i));
+		writel(0, base + PCIE_WIN04_REMAP_OFF(i));
+		writel(((cs->size - 1) & 0xffff0000) |
+			(cs->mbus_attr << 8) |
+			(dram->mbus_dram_target_id << 4) | 1,
+				base + PCIE_WIN04_CTRL_OFF(i));
+
+		size += cs->size;
+	}
+
+	/*
+	 * Setup BAR[1] to all DRAM banks.
+	 */
+	writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
+	writel(0, base + PCIE_BAR_HI_OFF(1));
+	writel(((size - 1) & 0xffff0000) | 1, base + PCIE_BAR_CTRL_OFF(1));
+}
+
+void __init orion_pcie_setup(void __iomem *base,
+			     struct mbus_dram_target_info *dram)
+{
+	u16 cmd;
+	u32 mask;
+
+	/*
+	 * Point PCIe unit MBUS decode windows to DRAM space.
+	 */
+	orion_pcie_setup_wins(base, dram);
+
+	/*
+	 * Master + slave enable.
+	 */
+	cmd = readw(base + PCIE_CMD_OFF);
+	cmd |= PCI_COMMAND_IO;
+	cmd |= PCI_COMMAND_MEMORY;
+	cmd |= PCI_COMMAND_MASTER;
+	writew(cmd, base + PCIE_CMD_OFF);
+
+	/*
+	 * Enable interrupt lines A-D.
+	 */
+	mask = readl(base + PCIE_MASK_OFF);
+	mask |= 0x0f000000;
+	writel(mask, base + PCIE_MASK_OFF);
+}
+
+int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,
+		       u32 devfn, int where, int size, u32 *val)
+{
+	writel(PCIE_CONF_BUS(bus->number) |
+		PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+		PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+		PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN,
+			base + PCIE_CONF_ADDR_OFF);
+
+	*val = readl(base + PCIE_CONF_DATA_OFF);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int orion_pcie_rd_conf_tlp(void __iomem *base, struct pci_bus *bus,
+			   u32 devfn, int where, int size, u32 *val)
+{
+	writel(PCIE_CONF_BUS(bus->number) |
+		PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+		PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+		PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN,
+			base + PCIE_CONF_ADDR_OFF);
+
+	*val = readl(base + PCIE_CONF_DATA_OFF);
+
+	if (bus->number != orion_pcie_get_local_bus_nr(base) ||
+	    PCI_FUNC(devfn) != 0)
+		*val = readl(base + PCIE_HEADER_LOG_4_OFF);
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int orion_pcie_rd_conf_wa(void __iomem *wa_base, struct pci_bus *bus,
+			  u32 devfn, int where, int size, u32 *val)
+{
+	*val = readl(wa_base + (PCIE_CONF_BUS(bus->number) |
+				PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+				PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+				PCIE_CONF_REG(where)));
+
+	if (size == 1)
+		*val = (*val >> (8 * (where & 3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8 * (where & 3))) & 0xffff;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+int orion_pcie_wr_conf(void __iomem *base, struct pci_bus *bus,
+		       u32 devfn, int where, int size, u32 val)
+{
+	int ret = PCIBIOS_SUCCESSFUL;
+
+	writel(PCIE_CONF_BUS(bus->number) |
+		PCIE_CONF_DEV(PCI_SLOT(devfn)) |
+		PCIE_CONF_FUNC(PCI_FUNC(devfn)) |
+		PCIE_CONF_REG(where) | PCIE_CONF_ADDR_EN,
+			base + PCIE_CONF_ADDR_OFF);
+
+	if (size == 4) {
+		writel(val, base + PCIE_CONF_DATA_OFF);
+	} else if (size == 2) {
+		writew(val, base + PCIE_CONF_DATA_OFF + (where & 3));
+	} else if (size == 1) {
+		writeb(val, base + PCIE_CONF_DATA_OFF + (where & 3));
+	} else {
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	return ret;
+}
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
new file mode 100644
index 000000000000..28b5285446e8
--- /dev/null
+++ b/arch/arm/plat-orion/time.c
@@ -0,0 +1,203 @@
+/*
+ * arch/arm/plat-orion/time.c
+ *
+ * Marvell Orion SoC timer handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * Timer 0 is used as free-running clocksource, while timer 1 is
+ * used as clock_event_device.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/mach/time.h>
+#include <asm/arch/hardware.h>
+
+/*
+ * Number of timer ticks per jiffy.
+ */
+static u32 ticks_per_jiffy;
+
+
+/*
+ * Timer block registers.
+ */
+#define TIMER_CTRL		(TIMER_VIRT_BASE + 0x0000)
+#define  TIMER0_EN		0x0001
+#define  TIMER0_RELOAD_EN	0x0002
+#define  TIMER1_EN		0x0004
+#define  TIMER1_RELOAD_EN	0x0008
+#define TIMER0_RELOAD		(TIMER_VIRT_BASE + 0x0010)
+#define TIMER0_VAL		(TIMER_VIRT_BASE + 0x0014)
+#define TIMER1_RELOAD		(TIMER_VIRT_BASE + 0x0018)
+#define TIMER1_VAL		(TIMER_VIRT_BASE + 0x001c)
+
+
+/*
+ * Clocksource handling.
+ */
+static cycle_t orion_clksrc_read(void)
+{
+	return 0xffffffff - readl(TIMER0_VAL);
+}
+
+static struct clocksource orion_clksrc = {
+	.name		= "orion_clocksource",
+	.shift		= 20,
+	.rating		= 300,
+	.read		= orion_clksrc_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+
+
+/*
+ * Clockevent handling.
+ */
+static int
+orion_clkevt_next_event(unsigned long delta, struct clock_event_device *dev)
+{
+	unsigned long flags;
+	u32 u;
+
+	if (delta == 0)
+		return -ETIME;
+
+	local_irq_save(flags);
+
+	/*
+	 * Clear and enable clockevent timer interrupt.
+	 */
+	writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+
+	u = readl(BRIDGE_MASK);
+	u |= BRIDGE_INT_TIMER1;
+	writel(u, BRIDGE_MASK);
+
+	/*
+	 * Setup new clockevent timer value.
+	 */
+	writel(delta, TIMER1_VAL);
+
+	/*
+	 * Enable the timer.
+	 */
+	u = readl(TIMER_CTRL);
+	u = (u & ~TIMER1_RELOAD_EN) | TIMER1_EN;
+	writel(u, TIMER_CTRL);
+
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+static void
+orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
+{
+	unsigned long flags;
+	u32 u;
+
+	local_irq_save(flags);
+	if (mode == CLOCK_EVT_MODE_PERIODIC) {
+		/*
+		 * Setup timer to fire at 1/HZ intervals.
+		 */
+		writel(ticks_per_jiffy - 1, TIMER1_RELOAD);
+		writel(ticks_per_jiffy - 1, TIMER1_VAL);
+
+		/*
+		 * Enable timer interrupt.
+		 */
+		u = readl(BRIDGE_MASK);
+		writel(u | BRIDGE_INT_TIMER1, BRIDGE_MASK);
+
+		/*
+		 * Enable timer.
+		 */
+		u = readl(TIMER_CTRL);
+		writel(u | TIMER1_EN | TIMER1_RELOAD_EN, TIMER_CTRL);
+	} else {
+		/*
+		 * Disable timer.
+		 */
+		u = readl(TIMER_CTRL);
+		writel(u & ~TIMER1_EN, TIMER_CTRL);
+
+		/*
+		 * Disable timer interrupt.
+		 */
+		u = readl(BRIDGE_MASK);
+		writel(u & ~BRIDGE_INT_TIMER1, BRIDGE_MASK);
+
+		/*
+		 * ACK pending timer interrupt.
+		 */
+		writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+
+	}
+	local_irq_restore(flags);
+}
+
+static struct clock_event_device orion_clkevt = {
+	.name		= "orion_tick",
+	.features	= CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+	.shift		= 32,
+	.rating		= 300,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= orion_clkevt_next_event,
+	.set_mode	= orion_clkevt_mode,
+};
+
+static irqreturn_t orion_timer_interrupt(int irq, void *dev_id)
+{
+	/*
+	 * ACK timer interrupt and call event handler.
+	 */
+	writel(~BRIDGE_INT_TIMER1, BRIDGE_CAUSE);
+	orion_clkevt.event_handler(&orion_clkevt);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction orion_timer_irq = {
+	.name		= "orion_tick",
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.handler	= orion_timer_interrupt
+};
+
+void __init orion_time_init(unsigned int irq, unsigned int tclk)
+{
+	u32 u;
+
+	ticks_per_jiffy = (tclk + HZ/2) / HZ;
+
+
+	/*
+	 * Setup free-running clocksource timer (interrupts
+	 * disabled.)
+	 */
+	writel(0xffffffff, TIMER0_VAL);
+	writel(0xffffffff, TIMER0_RELOAD);
+	u = readl(BRIDGE_MASK);
+	writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK);
+	u = readl(TIMER_CTRL);
+	writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL);
+	orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
+	clocksource_register(&orion_clksrc);
+
+
+	/*
+	 * Setup clockevent timer (interrupt-driven.)
+	 */
+	setup_irq(irq, &orion_timer_irq);
+	orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);
+	orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt);
+	orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt);
+	clockevents_register_device(&orion_clkevt);
+}
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 99a44746f8f2..d84167fb33b1 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -332,6 +332,58 @@ static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
+static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
+{
+	unsigned long div;
+
+	if ((rate == 0) || !clk->parent)
+		return 0;
+
+	div = clk_get_rate(clk->parent) / rate;
+	if (div < 2)
+		div = 2;
+	else if (div > 16)
+		div = 16;
+
+	return div;
+}
+
+static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
+	unsigned long rate)
+{
+	unsigned long div = s3c24xx_calc_div(clk, rate);
+
+	if (div == 0)
+		return 0;
+
+	return clk_get_rate(clk->parent) / div;
+}
+
+static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
+
+	if (div == 0)
+		return -EINVAL;
+
+	if (clk == &s3c24xx_dclk0) {
+		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
+			S3C2410_DCLKCON_DCLK0_CMP_MASK;
+		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
+			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
+	} else if (clk == &s3c24xx_dclk1) {
+		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
+			S3C2410_DCLKCON_DCLK1_CMP_MASK;
+		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
+			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
+	} else
+		return -EINVAL;
+
+	clk->rate = clk_get_rate(clk->parent) / div;
+	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
+		S3C24XX_DCLKCON);
+	return clk->rate;
+}
 
 static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 {
@@ -378,6 +430,8 @@ struct clk s3c24xx_dclk0 = {
 	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
 	.enable	        = s3c24xx_dclk_enable,
 	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
 };
 
 struct clk s3c24xx_dclk1 = {
@@ -386,6 +440,8 @@ struct clk s3c24xx_dclk1 = {
 	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
 	.enable		= s3c24xx_dclk_enable,
 	.set_parent	= s3c24xx_dclk_setparent,
+	.set_rate	= s3c24xx_set_dclk_rate,
+	.round_rate	= s3c24xx_round_dclk_rate,
 };
 
 struct clk s3c24xx_clkout0 = {
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index f513ab083b8f..f5699cadb0c3 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -28,15 +28,19 @@
 #include <linux/ioport.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
+#include <linux/delay.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/delay.h>
+#include <asm/cacheflush.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <asm/arch/system-reset.h>
+
 #include <asm/arch/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
@@ -203,6 +207,27 @@ static unsigned long s3c24xx_read_idcode_v4(void)
 #endif
 }
 
+/* Hook for arm_pm_restart to ensure we execute the reset code
+ * with the caches enabled. It seems at least the S3C2440 has a problem
+ * resetting if there is bus activity interrupted by the reset.
+ */
+static void s3c24xx_pm_restart(char mode)
+{
+	if (mode != 's') {
+		unsigned long flags;
+
+		local_irq_save(flags);
+		__cpuc_flush_kern_all();
+		__cpuc_flush_user_all();
+
+		arch_reset(mode);
+		local_irq_restore(flags);
+	}
+
+	/* fallback, or unhandled */
+	arm_machine_restart(mode);
+}
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
 	unsigned long idcode = 0x0;
@@ -230,6 +255,8 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 		panic("Unsupported S3C24XX CPU");
 	}
 
+	arm_pm_restart = s3c24xx_pm_restart;
+
 	(cpu->map_io)(mach_desc, size);
 }
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index ac9ff1666fcc..60f162dc4fad 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -130,8 +130,8 @@ dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 	dmadbg_dumpregs(fname, line, chan, &state);
 }
 
-#define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan))
-#define dbg_showchan(chan) dmadbg_showchan(__FUNCTION__, __LINE__, (chan))
+#define dbg_showregs(chan) dmadbg_showregs(__func__, __LINE__, (chan))
+#define dbg_showchan(chan) dmadbg_showchan(__func__, __LINE__, (chan))
 #else
 #define dbg_showregs(chan) do { } while(0)
 #define dbg_showchan(chan) do { } while(0)
@@ -403,7 +403,7 @@ static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
 
 			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
+					 __func__);
 			} else {
 				chan->load_state = S3C2410_DMALOAD_1RUNNING;
 				s3c2410_dma_loadbuffer(chan, chan->next);
@@ -463,16 +463,16 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 		return -EINVAL;
 
 	pr_debug("%s: id=%p, data=%08x, size=%d\n",
-		 __FUNCTION__, id, (unsigned int)data, size);
+		 __func__, id, (unsigned int)data, size);
 
 	buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC);
 	if (buf == NULL) {
 		pr_debug("%s: out of memory (%ld alloc)\n",
-			 __FUNCTION__, (long)sizeof(*buf));
+			 __func__, (long)sizeof(*buf));
 		return -ENOMEM;
 	}
 
-	//pr_debug("%s: new buffer %p\n", __FUNCTION__, buf);
+	//pr_debug("%s: new buffer %p\n", __func__, buf);
 	//dbg_showchan(chan);
 
 	buf->next  = NULL;
@@ -486,18 +486,18 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 	if (chan->curr == NULL) {
 		/* we've got nothing loaded... */
 		pr_debug("%s: buffer %p queued onto empty channel\n",
-			 __FUNCTION__, buf);
+			 __func__, buf);
 
 		chan->curr = buf;
 		chan->end  = buf;
 		chan->next = NULL;
 	} else {
 		pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n",
-			 chan->number, __FUNCTION__, buf);
+			 chan->number, __func__, buf);
 
 		if (chan->end == NULL)
 			pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n",
-				 chan->number, __FUNCTION__, chan);
+				 chan->number, __func__, chan);
 
 		chan->end->next = buf;
 		chan->end = buf;
@@ -572,7 +572,7 @@ s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
 		if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				/* flag error? */
 			printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-			       chan->number, __FUNCTION__);
+			       chan->number, __func__);
 			return;
 		}
 		break;
@@ -658,7 +658,7 @@ s3c2410_dma_irq(int irq, void *devpw)
 
 		if (buf->magic != BUF_MAGIC) {
 			printk(KERN_ERR "dma%d: %s: buf %p incorrect magic\n",
-			       chan->number, __FUNCTION__, buf);
+			       chan->number, __func__, buf);
 			return IRQ_HANDLED;
 		}
 
@@ -692,7 +692,7 @@ s3c2410_dma_irq(int irq, void *devpw)
 			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				/* flag error? */
 				printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n",
-				       chan->number, __FUNCTION__);
+				       chan->number, __func__);
 				return IRQ_HANDLED;
 			}
 
@@ -759,7 +759,7 @@ int s3c2410_dma_request(unsigned int channel,
 
 	if (!chan->irq_claimed) {
 		pr_debug("dma%d: %s : requesting irq %d\n",
-			 channel, __FUNCTION__, chan->irq);
+			 channel, __func__, chan->irq);
 
 		chan->irq_claimed = 1;
 		local_irq_restore(flags);
@@ -786,7 +786,7 @@ int s3c2410_dma_request(unsigned int channel,
 
 	/* need to setup */
 
-	pr_debug("%s: channel initialised, %p\n", __FUNCTION__, chan);
+	pr_debug("%s: channel initialised, %p\n", __func__, chan);
 
 	return chan->number | DMACH_LOW_LEVEL;
 }
@@ -823,7 +823,7 @@ int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
 
 	if (chan->state != S3C2410_DMA_IDLE) {
 		pr_debug("%s: need to stop dma channel %p\n",
-		       __FUNCTION__, chan);
+		       __func__, chan);
 
 		/* possibly flush the channel */
 		s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP);
@@ -852,7 +852,7 @@ static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
 	unsigned long flags;
 	unsigned long tmp;
 
-	pr_debug("%s:\n", __FUNCTION__);
+	pr_debug("%s:\n", __func__);
 
 	dbg_showchan(chan);
 
@@ -907,14 +907,14 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
 	struct s3c2410_dma_buf *buf, *next;
 	unsigned long flags;
 
-	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
+	pr_debug("%s: chan %p (%d)\n", __func__, chan, chan->number);
 
 	dbg_showchan(chan);
 
 	local_irq_save(flags);
 
 	if (chan->state != S3C2410_DMA_IDLE) {
-		pr_debug("%s: stopping channel...\n", __FUNCTION__ );
+		pr_debug("%s: stopping channel...\n", __func__ );
 		s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP);
 	}
 
@@ -929,7 +929,7 @@ static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
 			next = buf->next;
 
 			pr_debug("%s: free buffer %p, next %p\n",
-			       __FUNCTION__, buf, buf->next);
+			       __func__, buf, buf->next);
 
 			s3c2410_dma_buffdone(chan, buf, S3C2410_RES_ABORT);
 			s3c2410_dma_freebuf(buf);
@@ -976,7 +976,7 @@ static int s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 
 			if (s3c2410_dma_waitforload(chan, __LINE__) == 0) {
 				pr_debug("%s: buff not yet loaded, no more todo\n",
-					 __FUNCTION__);
+					 __func__);
 			} else {
 				chan->load_state = S3C2410_DMALOAD_1RUNNING;
 				s3c2410_dma_loadbuffer(chan, chan->next);
@@ -1050,16 +1050,16 @@ int s3c2410_dma_config(dmach_t channel,
 	struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
-		 __FUNCTION__, channel, xferunit, dcon);
+		 __func__, channel, xferunit, dcon);
 
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: Initial dcon is %08x\n", __FUNCTION__, dcon);
+	pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
 
 	dcon |= chan->dcon & dma_sel.dcon_mask;
 
-	pr_debug("%s: New dcon is %08x\n", __FUNCTION__, dcon);
+	pr_debug("%s: New dcon is %08x\n", __func__, dcon);
 
 	switch (xferunit) {
 	case 1:
@@ -1075,14 +1075,14 @@ int s3c2410_dma_config(dmach_t channel,
 		break;
 
 	default:
-		pr_debug("%s: bad transfer size %d\n", __FUNCTION__, xferunit);
+		pr_debug("%s: bad transfer size %d\n", __func__, xferunit);
 		return -EINVAL;
 	}
 
 	dcon |= S3C2410_DCON_HWTRIG;
 	dcon |= S3C2410_DCON_INTREQ;
 
-	pr_debug("%s: dcon now %08x\n", __FUNCTION__, dcon);
+	pr_debug("%s: dcon now %08x\n", __func__, dcon);
 
 	chan->dcon = dcon;
 	chan->xfer_unit = xferunit;
@@ -1099,7 +1099,7 @@ int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags);
+	pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
 
 	chan->flags = flags;
 
@@ -1120,7 +1120,7 @@ int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn);
+	pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
 
 	chan->op_fn = rtn;
 
@@ -1136,7 +1136,7 @@ int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
 	if (chan == NULL)
 		return -EINVAL;
 
-	pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn);
+	pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
 
 	chan->callback_fn = rtn;
 
@@ -1170,7 +1170,7 @@ int s3c2410_dma_devconfig(int channel,
 		return -EINVAL;
 
 	pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
-		 __FUNCTION__, (int)source, hwcfg, devaddr);
+		 __func__, (int)source, hwcfg, devaddr);
 
 	chan->source = source;
 	chan->dev_addr = devaddr;
@@ -1180,7 +1180,7 @@ int s3c2410_dma_devconfig(int channel,
 	case S3C2410_DMASRC_HW:
 		/* source is hardware */
 		pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n",
-			 __FUNCTION__, devaddr, hwcfg);
+			 __func__, devaddr, hwcfg);
 		dma_wrreg(chan, S3C2410_DMA_DISRCC, hwcfg & 3);
 		dma_wrreg(chan, S3C2410_DMA_DISRC,  devaddr);
 		dma_wrreg(chan, S3C2410_DMA_DIDSTC, (0<<1) | (0<<0));
@@ -1190,8 +1190,8 @@ int s3c2410_dma_devconfig(int channel,
 
 	case S3C2410_DMASRC_MEM:
 		/* source is memory */
-		pr_debug( "%s: mem source, devaddr=%08lx, hwcfg=%d\n",
-			  __FUNCTION__, devaddr, hwcfg);
+		pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n",
+			 __func__, devaddr, hwcfg);
 		dma_wrreg(chan, S3C2410_DMA_DISRCC, (0<<1) | (0<<0));
 		dma_wrreg(chan, S3C2410_DMA_DIDST,  devaddr);
 		dma_wrreg(chan, S3C2410_DMA_DIDSTC, hwcfg & 3);
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 7ed58c0c24c2..207a8b5a0c4a 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Jan 26 14:45:34 2008
+# Last update: Sat Apr 19 11:23:38 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -381,13 +381,13 @@ ks8695p			ARCH_KS8695P		KS8695P			363
 se4000			ARCH_SE4000		SE4000			364
 quadriceps		ARCH_QUADRICEPS		QUADRICEPS		365
 bronco			ARCH_BRONCO		BRONCO			366
-esl_wireless_tab	ARCH_ESL_WIRELESS_TABLETESL_WIRELESS_TABLET	367
+esl_wireless_tab	ARCH_ESL_WIRELESS_TAB	ESL_WIRELESS_TAB	367
 esl_sofcomp		ARCH_ESL_SOFCOMP	ESL_SOFCOMP		368
 s5c7375			ARCH_S5C7375		S5C7375			369
 spearhead		ARCH_SPEARHEAD		SPEARHEAD		370
 pantera			ARCH_PANTERA		PANTERA			371
 prayoglite		ARCH_PRAYOGLITE		PRAYOGLITE		372
-gumstix			ARCH_GUMSTIK		GUMSTIK			373
+gumstix			ARCH_GUMSTIX		GUMSTIX			373
 rcube			ARCH_RCUBE		RCUBE			374
 rea_olv			ARCH_REA_OLV		REA_OLV			375
 pxa_iphone		ARCH_PXA_IPHONE		PXA_IPHONE		376
@@ -1463,7 +1463,7 @@ artemis			MACH_ARTEMIS		ARTEMIS			1462
 htctitan		MACH_HTCTITAN		HTCTITAN		1463
 qranium			MACH_QRANIUM		QRANIUM			1464
 adx_wsc2		MACH_ADX_WSC2		ADX_WSC2		1465
-adx_medinet		MACH_ADX_MEDINET	ADX_MEDINET		1466
+adx_medcom		MACH_ADX_MEDINET	ADX_MEDINET		1466
 bboard			MACH_BBOARD		BBOARD			1467
 cambria			MACH_CAMBRIA		CAMBRIA			1468
 mt7xxx			MACH_MT7XXX		MT7XXX			1469
@@ -1611,3 +1611,112 @@ kb9263			MACH_KB9263		KB9263			1612
 mt7108			MACH_MT7108		MT7108			1613
 smtr2440		MACH_SMTR2440		SMTR2440		1614
 manao			MACH_MANAO		MANAO			1615
+cm_x300			MACH_CM_X300		CM_X300			1616
+gulfstream_kp		MACH_GULFSTREAM_KP	GULFSTREAM_KP		1617
+lanreadyfn522		MACH_LANREADYFN522	LANREADYFN522		1618
+arma37			MACH_ARMA37		ARMA37			1619
+mendel			MACH_MENDEL		MENDEL			1620
+pelco_iliad		MACH_PELCO_ILIAD	PELCO_ILIAD		1621
+unit2p			MACH_UNIT2P		UNIT2P			1622
+inc20otter		MACH_INC20OTTER		INC20OTTER		1623
+at91sam9g20ek		MACH_AT91SAM9G20EK	AT91SAM9G20EK		1624
+sc_ge2			MACH_STORCENTER		STORCENTER		1625
+smdk6410		MACH_SMDK6410		SMDK6410		1626
+u300			MACH_U300		U300			1627
+u500			MACH_U500		U500			1628
+ds9260			MACH_DS9260		DS9260			1629
+riverrock		MACH_RIVERROCK		RIVERROCK		1630
+scibath			MACH_SCIBATH		SCIBATH			1631
+at91sam7se		MACH_AT91SAM7SE512EK	AT91SAM7SE512EK		1632
+wrt350n_v2		MACH_WRT350N_V2		WRT350N_V2		1633
+multimedia		MACH_MULTIMEDIA		MULTIMEDIA		1634
+marvin			MACH_MARVIN		MARVIN			1635
+x500			MACH_X500		X500			1636
+awlug4lcu		MACH_AWLUG4LCU		AWLUG4LCU		1637
+palermoc		MACH_PALERMOC		PALERMOC		1638
+omap_ldp		MACH_OMAP_LDP		OMAP_LDP		1639
+ip500			MACH_IP500		IP500			1640
+mx35ads			MACH_MACH_MX35ADS	MACH_MX35ADS		1641
+ase2			MACH_ASE2		ASE2			1642
+mx35evb			MACH_MX35EVB		MX35EVB			1643
+aml_m8050		MACH_AML_M8050		AML_M8050		1644
+mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
+mars			MACH_MARS		MARS			1646
+ntosd_644xa		MACH_NTOSD_644XA	NTOSD_644XA		1647
+badger			MACH_BADGER		BADGER			1648
+trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
+trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
+marlin			MACH_MARLIN		MARLIN			1651
+ts7800			MACH_TS7800		TS7800			1652
+hpipaq214		MACH_HPIPAQ214		HPIPAQ214		1653
+at572d940dcm		MACH_AT572D940DCM	AT572D940DCM		1654
+ne1board		MACH_NE1BOARD		NE1BOARD		1655
+zante			MACH_ZANTE		ZANTE			1656
+sffsdr			MACH_SFFSDR		SFFSDR			1657
+tw2662			MACH_TW2662		TW2662			1658
+vf10xx			MACH_VF10XX		VF10XX			1659
+zoran43xx		MACH_ZORAN43XX		ZORAN43XX		1660
+sonix926		MACH_SONIX926		SONIX926		1661
+celestialsemi		MACH_CELESTIALSEMI	CELESTIALSEMI		1662
+cc9m2443		MACH_CC9M2443		CC9M2443		1663
+tw5334			MACH_TW5334		TW5334			1664
+omap_htcartemis		MACH_HTCARTEMIS		HTCARTEMIS		1665
+nal_hlite		MACH_NAL_HLITE		NAL_HLITE		1666
+htcvogue		MACH_HTCVOGUE		HTCVOGUE		1667
+smartweb		MACH_SMARTWEB		SMARTWEB		1668
+mv86xx			MACH_MV86XX		MV86XX			1669
+mv87xx			MACH_MV87XX		MV87XX			1670
+songyoungho		MACH_SONGYOUNGHO	SONGYOUNGHO		1671
+younghotema		MACH_YOUNGHOTEMA	YOUNGHOTEMA		1672
+pcm037			MACH_PCM037		PCM037			1673
+mmvp			MACH_MMVP		MMVP			1674
+mmap			MACH_MMAP		MMAP			1675
+ptid2410		MACH_PTID2410		PTID2410		1676
+james_926		MACH_JAMES_926		JAMES_926		1677
+fm6000			MACH_FM6000		FM6000			1678
+db88f6281_bp		MACH_DB88F6281_BP	DB88F6281_BP		1680
+rd88f6192_nas		MACH_RD88F6192_NAS	RD88F6192_NAS		1681
+rd88f6281		MACH_RD88F6281		RD88F6281		1682
+db78x00_bp		MACH_DB78X00_BP		DB78X00_BP		1683
+smdk2416		MACH_SMDK2416		SMDK2416		1685
+oce_spider_si		MACH_OCE_SPIDER_SI	OCE_SPIDER_SI		1686
+oce_spider_sk		MACH_OCE_SPIDER_SK	OCE_SPIDER_SK		1687
+rovern6			MACH_ROVERN6		ROVERN6			1688
+pelco_evolution		MACH_PELCO_EVOLUTION	PELCO_EVOLUTION		1689
+wbd111			MACH_WBD111		WBD111			1690
+elaracpe		MACH_ELARACPE		ELARACPE		1691
+mabv3			MACH_MABV3		MABV3			1692
+mv2120			MACH_MV2120		MV2120			1693
+csb737			MACH_CSB737		CSB737			1695
+mx51_3ds		MACH_MX51_3DS		MX51_3DS		1696
+g900			MACH_G900		G900			1697
+apf27			MACH_APF27		APF27			1698
+ggus2000		MACH_GGUS2000		GGUS2000		1699
+omap_2430_mimic		MACH_OMAP_2430_MIMIC	OMAP_2430_MIMIC		1700
+imx27lite		MACH_IMX27LITE		IMX27LITE		1701
+almex			MACH_ALMEX		ALMEX			1702
+control			MACH_CONTROL		CONTROL			1703
+mba2410			MACH_MBA2410		MBA2410			1704
+volcano			MACH_VOLCANO		VOLCANO			1705
+zenith			MACH_ZENITH		ZENITH			1706
+muchip			MACH_MUCHIP		MUCHIP			1707
+magellan		MACH_MAGELLAN		MAGELLAN		1708
+usb_a9260		MACH_USB_A9260		USB_A9260		1709
+usb_a9263		MACH_USB_A9263		USB_A9263		1710
+qil_a9260		MACH_QIL_A9260		QIL_A9260		1711
+cme9210			MACH_CME9210		CME9210			1712
+hczh4			MACH_HCZH4		HCZH4			1713
+spearbasic		MACH_SPEARBASIC		SPEARBASIC		1714
+dep2440			MACH_DEP2440		DEP2440			1715
+hdl_gxr			MACH_HDL_GXR		HDL_GXR			1716
+hdl_gt			MACH_HDL_GT		HDL_GT			1717
+hdl_4g			MACH_HDL_4G		HDL_4G			1718
+s3c6000			MACH_S3C6000		S3C6000			1719
+mmsp2_mdk		MACH_MMSP2_MDK		MMSP2_MDK		1720
+mpx220			MACH_MPX220		MPX220			1721
+kzm_arm11_01		MACH_KZM_ARM11_01	KZM_ARM11_01		1722
+htc_polaris		MACH_HTC_POLARIS	HTC_POLARIS		1723
+htc_kaiser		MACH_HTC_KAISER		HTC_KAISER		1724
+lg_ks20			MACH_LG_KS20		LG_KS20			1725
+hhgps			MACH_HHGPS		HHGPS			1726
+nokia_n810_wimax	MACH_NOKIA_N810_WIMAX	NOKIA_N810_WIMAX	1727
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index c75d7089f982..09ad7995080c 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,7 +10,6 @@ config AVR32
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
-	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	help
@@ -48,6 +47,9 @@ config RWSEM_GENERIC_SPINLOCK
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
 config RWSEM_XCHGADD_ALGORITHM
 	def_bool n
 
@@ -71,6 +73,8 @@ source "init/Kconfig"
 
 menu "System Type and features"
 
+source "kernel/time/Kconfig"
+
 config SUBARCH_AVR32B
 	bool
 config MMU
diff --git a/arch/avr32/kernel/Makefile b/arch/avr32/kernel/Makefile
index e4b6d122b033..18229d0d1861 100644
--- a/arch/avr32/kernel/Makefile
+++ b/arch/avr32/kernel/Makefile
@@ -6,7 +6,7 @@ extra-y				:= head.o vmlinux.lds
 
 obj-$(CONFIG_SUBARCH_AVR32B)	+= entry-avr32b.o
 obj-y				+= syscall_table.o syscall-stubs.o irq.o
-obj-y				+= setup.o traps.o semaphore.o ocd.o ptrace.o
+obj-y				+= setup.o traps.o ocd.o ptrace.o
 obj-y				+= signal.o sys_avr32.o process.o time.o
 obj-y				+= init_task.o switch_to.o cpu.o
 obj-$(CONFIG_MODULES)		+= module.o avr32_ksyms.o
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 8cf16d7a7040..5f31702d6b1c 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -741,26 +741,6 @@ irq_level\level:
 
 	.section .irq.text,"ax",@progbits
 
-.global cpu_idle_sleep
-cpu_idle_sleep:
-	mask_interrupts
-	get_thread_info r8
-	ld.w	r9, r8[TI_flags]
-	bld	r9, TIF_NEED_RESCHED
-	brcs	cpu_idle_enable_int_and_exit
-	sbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-	unmask_interrupts
-	sleep 0
-cpu_idle_skip_sleep:
-	mask_interrupts
-	ld.w	r9, r8[TI_flags]
-	cbr	r9, TIF_CPU_GOING_TO_SLEEP
-	st.w	r8[TI_flags], r9
-cpu_idle_enable_int_and_exit:
-	unmask_interrupts
-	retal	r12
-
 	.global	irq_level0
 	.global	irq_level1
 	.global	irq_level2
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 7f4af0b1e111..6cf9df176274 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,11 +18,11 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
+#include <asm/arch/pm.h>
+
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
 
-extern void cpu_idle_sleep(void);
-
 /*
  * This file handles the architecture-dependent parts of process handling..
  */
@@ -54,6 +54,8 @@ void machine_halt(void)
 
 void machine_power_off(void)
 {
+	if (pm_power_off)
+		pm_power_off();
 }
 
 void machine_restart(char *cmd)
diff --git a/arch/avr32/kernel/semaphore.c b/arch/avr32/kernel/semaphore.c
deleted file mode 100644
index 1e2705a05016..000000000000
--- a/arch/avr32/kernel/semaphore.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * AVR32 sempahore implementation.
- *
- * Copyright (C) 2004-2006 Atmel Corporation
- *
- * Based on linux/arch/i386/kernel/semaphore.c
- *  Copyright (C) 1999 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-
-#include <asm/semaphore.h>
-#include <asm/atomic.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- *  - only on a boundary condition do we need to care. When we go
- *    from a negative count to a non-negative, we wake people up.
- *  - when we go from a non-negative count to a negative do we
- *    (a) synchronize with the "sleeper" count and (b) make sure
- *    that we're on the wakeup list before we synchronize so that
- *    we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
-	wake_up(&sem->wait);
-}
-EXPORT_SYMBOL(__up);
-
-void __sched __down(struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-        DECLARE_WAITQUEUE(wait, tsk);
-        unsigned long flags;
-
-        tsk->state = TASK_UNINTERRUPTIBLE;
-        spin_lock_irqsave(&sem->wait.lock, flags);
-        add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
-        sem->sleepers++;
-        for (;;) {
-                int sleepers = sem->sleepers;
-
-                /*
-                 * Add "everybody else" into it. They aren't
-                 * playing, because we own the spinlock in
-                 * the wait_queue_head.
-                 */
-                if (atomic_add_return(sleepers - 1, &sem->count) >= 0) {
-                        sem->sleepers = 0;
-                        break;
-                }
-                sem->sleepers = 1;      /* us - see -1 above */
-                spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-                schedule();
-
-                spin_lock_irqsave(&sem->wait.lock, flags);
-                tsk->state = TASK_UNINTERRUPTIBLE;
-        }
-        remove_wait_queue_locked(&sem->wait, &wait);
-        wake_up_locked(&sem->wait);
-        spin_unlock_irqrestore(&sem->wait.lock, flags);
-        tsk->state = TASK_RUNNING;
-}
-EXPORT_SYMBOL(__down);
-
-int __sched __down_interruptible(struct semaphore *sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-        DECLARE_WAITQUEUE(wait, tsk);
-        unsigned long flags;
-
-        tsk->state = TASK_INTERRUPTIBLE;
-        spin_lock_irqsave(&sem->wait.lock, flags);
-        add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
-        sem->sleepers++;
-        for (;;) {
-                int sleepers = sem->sleepers;
-
-		/*
-		 * With signals pending, this turns into the trylock
-		 * failure case - we won't be sleeping, and we can't
-		 * get the lock as it has contention. Just correct the
-		 * count and exit.
-		 */
-		if (signal_pending(current)) {
-			retval = -EINTR;
-			sem->sleepers = 0;
-			atomic_add(sleepers, &sem->count);
-			break;
-		}
-
-                /*
-                 * Add "everybody else" into it. They aren't
-                 * playing, because we own the spinlock in
-                 * the wait_queue_head.
-                 */
-                if (atomic_add_return(sleepers - 1, &sem->count) >= 0) {
-                        sem->sleepers = 0;
-                        break;
-                }
-                sem->sleepers = 1;      /* us - see -1 above */
-                spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-                schedule();
-
-                spin_lock_irqsave(&sem->wait.lock, flags);
-                tsk->state = TASK_INTERRUPTIBLE;
-        }
-        remove_wait_queue_locked(&sem->wait, &wait);
-        wake_up_locked(&sem->wait);
-        spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-        tsk->state = TASK_RUNNING;
-	return retval;
-}
-EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index e66a07a928cd..2687b730e2d0 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -163,6 +163,7 @@ add_reserved_region(resource_size_t start, resource_size_t end,
 	new->start = start;
 	new->end = end;
 	new->name = name;
+	new->sibling = next;
 	new->flags = IORESOURCE_MEM;
 
 	*pprev = new;
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index 36a46c3ae308..00a9862380ff 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -1,16 +1,12 @@
 /*
  * Copyright (C) 2004-2007 Atmel Corporation
  *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/clk.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <linux/time.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -27,207 +23,133 @@
 #include <asm/io.h>
 #include <asm/sections.h>
 
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
+#include <asm/arch/pm.h>
 
-/* the count value for the next timer interrupt */
-static u32 expirelo;
 
-cycle_t __weak read_cycle_count(void)
+static cycle_t read_cycle_count(void)
 {
 	return (cycle_t)sysreg_read(COUNT);
 }
 
-struct clocksource __weak clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 350,
+/*
+ * The architectural cycle count registers are a fine clocksource unless
+ * the system idle loop use sleep states like "idle":  the CPU cycles
+ * measured by COUNT (and COMPARE) don't happen during sleep states.
+ * Their duration also changes if cpufreq changes the CPU clock rate.
+ * So we rate the clocksource using COUNT as very low quality.
+ */
+static struct clocksource counter = {
+	.name		= "avr32_counter",
+	.rating		= 50,
 	.read		= read_cycle_count,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.shift		= 16,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-
-struct irqaction timer_irqaction = {
-	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "timer",
-};
-
-/*
- * By default we provide the null RTC ops
- */
-static unsigned long null_rtc_get_time(void)
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
-	return mktime(2007, 1, 1, 0, 0, 0);
-}
-
-static int null_rtc_set_time(unsigned long sec)
-{
-	return 0;
-}
+	struct clock_event_device *evdev = dev_id;
 
-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-
-static void avr32_timer_ack(void)
-{
-	u32 count;
-
-	/* Ack this timer interrupt and set the next one */
-	expirelo += cycles_per_jiffy;
-	/* setting COMPARE to 0 stops the COUNT-COMPARE */
-	if (expirelo == 0) {
-		sysreg_write(COMPARE, expirelo + 1);
-	} else {
-		sysreg_write(COMPARE, expirelo);
-	}
+	/*
+	 * Disable the interrupt until the clockevent subsystem
+	 * reprograms it.
+	 */
+	sysreg_write(COMPARE, 0);
 
-	/* Check to see if we have missed any timer interrupts */
-	count = sysreg_read(COUNT);
-	if ((count - expirelo) < 0x7fffffff) {
-		expirelo = count + cycles_per_jiffy;
-		sysreg_write(COMPARE, expirelo);
-	}
+	evdev->event_handler(evdev);
+	return IRQ_HANDLED;
 }
 
-int __weak avr32_hpt_init(void)
-{
-	int ret;
-	unsigned long mult, shift, count_hz;
-
-	count_hz = clk_get_rate(boot_cpu_data.clk);
-	shift = clocksource_avr32.shift;
-	mult = clocksource_hz2mult(count_hz, shift);
-	clocksource_avr32.mult = mult;
-
-	{
-		u64 tmp;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	}
+static struct irqaction timer_irqaction = {
+	.handler	= timer_interrupt,
+	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	.name		= "avr32_comparator",
+};
 
-	ret = setup_irq(0, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request IRQ 0: %d\n", ret);
-		return -ENODEV;
-	}
+static int comparator_next_event(unsigned long delta,
+		struct clock_event_device *evdev)
+{
+	unsigned long	flags;
 
-	printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-			"%lu.%03lu MHz\n",
-			((count_hz + 500) / 1000) / 1000,
-			((count_hz + 500) / 1000) % 1000);
+	raw_local_irq_save(flags);
 
-	return 0;
-}
+	/* The time to read COUNT then update COMPARE must be less
+	 * than the min_delta_ns value for this clockevent source.
+	 */
+	sysreg_write(COMPARE, (sysreg_read(COUNT) + delta) ? : 1);
 
-/*
- * Taken from MIPS c0_hpt_timer_init().
- *
- * The reason COUNT is written twice is probably to make sure we don't get any
- * timer interrupts while we are messing with the counter.
- */
-int __weak avr32_hpt_start(void)
-{
-	u32 count = sysreg_read(COUNT);
-	expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
-	sysreg_write(COUNT, expirelo - cycles_per_jiffy);
-	sysreg_write(COMPARE, expirelo);
-	sysreg_write(COUNT, count);
+	raw_local_irq_restore(flags);
 
 	return 0;
 }
 
-/*
- * local_timer_interrupt() does profiling and process accounting on a
- * per-CPU basis.
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- */
-void local_timer_interrupt(int irq, void *dev_id)
+static void comparator_mode(enum clock_event_mode mode,
+		struct clock_event_device *evdev)
 {
-	if (current->pid)
-		profile_tick(CPU_PROFILING);
-	update_process_times(user_mode(get_irq_regs()));
+	switch (mode) {
+	case CLOCK_EVT_MODE_ONESHOT:
+		pr_debug("%s: start\n", evdev->name);
+		/* FALLTHROUGH */
+	case CLOCK_EVT_MODE_RESUME:
+		cpu_disable_idle_sleep();
+		break;
+	case CLOCK_EVT_MODE_UNUSED:
+	case CLOCK_EVT_MODE_SHUTDOWN:
+		sysreg_write(COMPARE, 0);
+		pr_debug("%s: stop\n", evdev->name);
+		cpu_enable_idle_sleep();
+		break;
+	default:
+		BUG();
+	}
 }
 
-irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
-{
-	/* ack timer interrupt and try to set next interrupt */
-	avr32_timer_ack();
-
-	/*
-	 * Call the generic timer interrupt handler
-	 */
-	write_seqlock(&xtime_lock);
-	do_timer(1);
-	write_sequnlock(&xtime_lock);
-
-	/*
-	 * In UP mode, we call local_timer_interrupt() to do profiling
-	 * and process accounting.
-	 *
-	 * SMP is not supported yet.
-	 */
-	local_timer_interrupt(irq, dev_id);
-
-	return IRQ_HANDLED;
-}
+static struct clock_event_device comparator = {
+	.name		= "avr32_comparator",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.shift		= 16,
+	.rating		= 50,
+	.cpumask	= CPU_MASK_CPU0,
+	.set_next_event	= comparator_next_event,
+	.set_mode	= comparator_mode,
+};
 
 void __init time_init(void)
 {
+	unsigned long counter_hz;
 	int ret;
 
-	/*
-	 * Make sure we don't get any COMPARE interrupts before we can
-	 * handle them.
-	 */
-	sysreg_write(COMPARE, 0);
-
-	xtime.tv_sec = rtc_get_time();
+	xtime.tv_sec = mktime(2007, 1, 1, 0, 0, 0);
 	xtime.tv_nsec = 0;
 
 	set_normalized_timespec(&wall_to_monotonic,
 				-xtime.tv_sec, -xtime.tv_nsec);
 
-	ret = avr32_hpt_init();
-	if (ret) {
-		pr_debug("timer: failed setup: %d\n", ret);
-		return;
-	}
+	/* figure rate for counter */
+	counter_hz = clk_get_rate(boot_cpu_data.clk);
+	counter.mult = clocksource_hz2mult(counter_hz, counter.shift);
 
-	ret = clocksource_register(&clocksource_avr32);
+	ret = clocksource_register(&counter);
 	if (ret)
 		pr_debug("timer: could not register clocksource: %d\n", ret);
 
-	ret = avr32_hpt_start();
-	if (ret) {
-		pr_debug("timer: failed starting: %d\n", ret);
-		return;
-	}
-}
+	/* setup COMPARE clockevent */
+	comparator.mult = div_sc(counter_hz, NSEC_PER_SEC, comparator.shift);
+	comparator.max_delta_ns = clockevent_delta2ns((u32)~0, &comparator);
+	comparator.min_delta_ns = clockevent_delta2ns(50, &comparator) + 1;
 
-static struct sysdev_class timer_class = {
-	.name = "timer",
-};
+	sysreg_write(COMPARE, 0);
+	timer_irqaction.dev_id = &comparator;
 
-static struct sys_device timer_device = {
-	.id	= 0,
-	.cls	= &timer_class,
-};
+	ret = setup_irq(0, &timer_irqaction);
+	if (ret)
+		pr_debug("timer: could not request IRQ 0: %d\n", ret);
+	else {
+		clockevents_register_device(&comparator);
 
-static int __init init_timer_sysfs(void)
-{
-	int err = sysdev_class_register(&timer_class);
-	if (!err)
-		err = sysdev_register(&timer_device);
-	return err;
+		pr_info("%s: irq 0, %lu.%03lu MHz\n", comparator.name,
+				((counter_hz + 500) / 1000) / 1000,
+				((counter_hz + 500) / 1000) % 1000);
+	}
 }
-
-device_initcall(init_timer_sysfs);
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index cf6f686d9b0b..b835c4c01368 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -178,6 +178,7 @@ static int do_cop_absent(u32 insn)
 	return 0;
 }
 
+#ifdef CONFIG_BUG
 int is_valid_bugaddr(unsigned long pc)
 {
 	unsigned short opcode;
@@ -189,6 +190,7 @@ int is_valid_bugaddr(unsigned long pc)
 
 	return opcode == AVR32_BUG_OPCODE;
 }
+#endif
 
 asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 {
@@ -197,6 +199,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 	void __user *pc;
 	long code;
 
+#ifdef CONFIG_BUG
 	if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
 		enum bug_trap_type type;
 
@@ -211,6 +214,7 @@ asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
 			die("Kernel BUG", regs, SIGKILL);
 		}
 	}
+#endif
 
 	local_irq_enable();
 
diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile
index 5e9f8217befc..e89009439e4a 100644
--- a/arch/avr32/mach-at32ap/Makefile
+++ b/arch/avr32/mach-at32ap/Makefile
@@ -1,4 +1,3 @@
 obj-y				+= at32ap.o clock.o intc.o extint.o pio.o hsmc.o
-obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o
-obj-$(CONFIG_CPU_AT32AP700X)	+= time-tc.o
+obj-$(CONFIG_CPU_AT32AP700X)	+= at32ap700x.o pm-at32ap700x.o
 obj-$(CONFIG_CPU_FREQ_AT32AP)	+= cpufreq.o
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7678fee9a885..0f24b4f85c17 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -6,11 +6,13 @@
  * published by the Free Software Foundation.
  */
 #include <linux/clk.h>
+#include <linux/delay.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -98,6 +100,9 @@ unsigned long at32ap7000_osc_rates[3] = {
 	[2] = 12000000,
 };
 
+static struct clk osc0;
+static struct clk osc1;
+
 static unsigned long osc_get_rate(struct clk *clk)
 {
 	return at32ap7000_osc_rates[clk->index];
@@ -107,9 +112,6 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
 {
 	unsigned long div, mul, rate;
 
-	if (!(control & PM_BIT(PLLEN)))
-		return 0;
-
 	div = PM_BFEXT(PLLDIV, control) + 1;
 	mul = PM_BFEXT(PLLMUL, control) + 1;
 
@@ -120,6 +122,71 @@ static unsigned long pll_get_rate(struct clk *clk, unsigned long control)
 	return rate;
 }
 
+static long pll_set_rate(struct clk *clk, unsigned long rate,
+			 u32 *pll_ctrl)
+{
+	unsigned long mul;
+	unsigned long mul_best_fit = 0;
+	unsigned long div;
+	unsigned long div_min;
+	unsigned long div_max;
+	unsigned long div_best_fit = 0;
+	unsigned long base;
+	unsigned long pll_in;
+	unsigned long actual = 0;
+	unsigned long rate_error;
+	unsigned long rate_error_prev = ~0UL;
+	u32 ctrl;
+
+	/* Rate must be between 80 MHz and 200 Mhz. */
+	if (rate < 80000000UL || rate > 200000000UL)
+		return -EINVAL;
+
+	ctrl = PM_BF(PLLOPT, 4);
+	base = clk->parent->get_rate(clk->parent);
+
+	/* PLL input frequency must be between 6 MHz and 32 MHz. */
+	div_min = DIV_ROUND_UP(base, 32000000UL);
+	div_max = base / 6000000UL;
+
+	if (div_max < div_min)
+		return -EINVAL;
+
+	for (div = div_min; div <= div_max; div++) {
+		pll_in = (base + div / 2) / div;
+		mul = (rate + pll_in / 2) / pll_in;
+
+		if (mul == 0)
+			continue;
+
+		actual = pll_in * mul;
+		rate_error = abs(actual - rate);
+
+		if (rate_error < rate_error_prev) {
+			mul_best_fit = mul;
+			div_best_fit = div;
+			rate_error_prev = rate_error;
+		}
+
+		if (rate_error == 0)
+			break;
+	}
+
+	if (div_best_fit == 0)
+		return -EINVAL;
+
+	ctrl |= PM_BF(PLLMUL, mul_best_fit - 1);
+	ctrl |= PM_BF(PLLDIV, div_best_fit - 1);
+	ctrl |= PM_BF(PLLCOUNT, 16);
+
+	if (clk->parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+
+	*pll_ctrl = ctrl;
+
+	return actual;
+}
+
 static unsigned long pll0_get_rate(struct clk *clk)
 {
 	u32 control;
@@ -129,6 +196,41 @@ static unsigned long pll0_get_rate(struct clk *clk)
 	return pll_get_rate(clk, control);
 }
 
+static void pll1_mode(struct clk *clk, int enabled)
+{
+	unsigned long timeout;
+	u32 status;
+	u32 ctrl;
+
+	ctrl = pm_readl(PLL1);
+
+	if (enabled) {
+		if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) {
+			pr_debug("clk %s: failed to enable, rate not set\n",
+					clk->name);
+			return;
+		}
+
+		ctrl |= PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+
+		/* Wait for PLL lock. */
+		for (timeout = 10000; timeout; timeout--) {
+			status = pm_readl(ISR);
+			if (status & PM_BIT(LOCK1))
+				break;
+			udelay(10);
+		}
+
+		if (!(status & PM_BIT(LOCK1)))
+			printk(KERN_ERR "clk %s: timeout waiting for lock\n",
+					clk->name);
+	} else {
+		ctrl &= ~PM_BIT(PLLEN);
+		pm_writel(PLL1, ctrl);
+	}
+}
+
 static unsigned long pll1_get_rate(struct clk *clk)
 {
 	u32 control;
@@ -138,6 +240,49 @@ static unsigned long pll1_get_rate(struct clk *clk)
 	return pll_get_rate(clk, control);
 }
 
+static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
+	u32 ctrl = 0;
+	unsigned long actual_rate;
+
+	actual_rate = pll_set_rate(clk, rate, &ctrl);
+
+	if (apply) {
+		if (actual_rate != rate)
+			return -EINVAL;
+		if (clk->users > 0)
+			return -EBUSY;
+		pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n",
+				clk->name, rate, actual_rate);
+		pm_writel(PLL1, ctrl);
+	}
+
+	return actual_rate;
+}
+
+static int pll1_set_parent(struct clk *clk, struct clk *parent)
+{
+	u32 ctrl;
+
+	if (clk->users > 0)
+		return -EBUSY;
+
+	ctrl = pm_readl(PLL1);
+	WARN_ON(ctrl & PM_BIT(PLLEN));
+
+	if (parent == &osc0)
+		ctrl &= ~PM_BIT(PLLOSC);
+	else if (parent == &osc1)
+		ctrl |= PM_BIT(PLLOSC);
+	else
+		return -EINVAL;
+
+	pm_writel(PLL1, ctrl);
+	clk->parent = parent;
+
+	return 0;
+}
+
 /*
  * The AT32AP7000 has five primary clock sources: One 32kHz
  * oscillator, two crystal oscillators and two PLLs.
@@ -166,7 +311,10 @@ static struct clk pll0 = {
 };
 static struct clk pll1 = {
 	.name		= "pll1",
+	.mode		= pll1_mode,
 	.get_rate	= pll1_get_rate,
+	.set_rate	= pll1_set_rate,
+	.set_parent	= pll1_set_parent,
 	.parent		= &osc0,
 };
 
@@ -605,19 +753,32 @@ static inline void set_ebi_sfr_bits(u32 mask)
 }
 
 /* --------------------------------------------------------------------
- *  System Timer/Counter (TC)
+ *  Timer/Counter (TC)
  * -------------------------------------------------------------------- */
-static struct resource at32_systc0_resource[] = {
+
+static struct resource at32_tcb0_resource[] = {
 	PBMEM(0xfff00c00),
 	IRQ(22),
 };
-struct platform_device at32_systc0_device = {
-	.name		= "systc",
+static struct platform_device at32_tcb0_device = {
+	.name		= "atmel_tcb",
 	.id		= 0,
-	.resource	= at32_systc0_resource,
-	.num_resources	= ARRAY_SIZE(at32_systc0_resource),
+	.resource	= at32_tcb0_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb0_resource),
 };
-DEV_CLK(pclk, at32_systc0, pbb, 3);
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
+
+static struct resource at32_tcb1_resource[] = {
+	PBMEM(0xfff01000),
+	IRQ(23),
+};
+static struct platform_device at32_tcb1_device = {
+	.name		= "atmel_tcb",
+	.id		= 1,
+	.resource	= at32_tcb1_resource,
+	.num_resources	= ARRAY_SIZE(at32_tcb1_resource),
+};
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
 
 /* --------------------------------------------------------------------
  *  PIO
@@ -669,7 +830,8 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&pdc_device);
 	platform_device_register(&dmaca0_device);
 
-	platform_device_register(&at32_systc0_device);
+	platform_device_register(&at32_tcb0_device);
+	platform_device_register(&at32_tcb1_device);
 
 	platform_device_register(&pio0_device);
 	platform_device_register(&pio1_device);
@@ -989,7 +1151,9 @@ static struct clk atmel_twi0_pclk = {
 	.index		= 2,
 };
 
-struct platform_device *__init at32_add_device_twi(unsigned int id)
+struct platform_device *__init at32_add_device_twi(unsigned int id,
+						    struct i2c_board_info *b,
+						    unsigned int n)
 {
 	struct platform_device *pdev;
 
@@ -1009,6 +1173,9 @@ struct platform_device *__init at32_add_device_twi(unsigned int id)
 
 	atmel_twi0_pclk.dev = &pdev->dev;
 
+	if (b)
+		i2c_register_board_info(id, b, n);
+
 	platform_device_add(pdev);
 	return pdev;
 
@@ -1351,9 +1518,39 @@ static struct clk usba0_hclk = {
 	.index		= 6,
 };
 
+#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
+	[idx] = {						\
+		.name		= nam,				\
+		.index		= idx,				\
+		.fifo_size	= maxpkt,			\
+		.nr_banks	= maxbk,			\
+		.can_dma	= dma,				\
+		.can_isoc	= isoc,				\
+	}
+
+static struct usba_ep_data at32_usba_ep[] __initdata = {
+	EP("ep0",     0,   64, 1, 0, 0),
+	EP("ep1",     1,  512, 2, 1, 1),
+	EP("ep2",     2,  512, 2, 1, 1),
+	EP("ep3-int", 3,   64, 3, 1, 0),
+	EP("ep4-int", 4,   64, 3, 1, 0),
+	EP("ep5",     5, 1024, 3, 1, 1),
+	EP("ep6",     6, 1024, 3, 1, 1),
+};
+
+#undef EP
+
 struct platform_device *__init
 at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 {
+	/*
+	 * pdata doesn't have room for any endpoints, so we need to
+	 * append room for the ones we need right after it.
+	 */
+	struct {
+		struct usba_platform_data pdata;
+		struct usba_ep_data ep[7];
+	} usba_data;
 	struct platform_device *pdev;
 
 	if (id != 0)
@@ -1367,13 +1564,20 @@ at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
 					  ARRAY_SIZE(usba0_resource)))
 		goto out_free_pdev;
 
-	if (data) {
-		if (platform_device_add_data(pdev, data, sizeof(*data)))
-			goto out_free_pdev;
+	if (data)
+		usba_data.pdata.vbus_pin = data->vbus_pin;
+	else
+		usba_data.pdata.vbus_pin = -EINVAL;
+
+	data = &usba_data.pdata;
+	data->num_ep = ARRAY_SIZE(at32_usba_ep);
+	memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep));
 
-		if (data->vbus_pin != GPIO_PIN_NONE)
-			at32_select_gpio(data->vbus_pin, 0);
-	}
+	if (platform_device_add_data(pdev, data, sizeof(usba_data)))
+		goto out_free_pdev;
+
+	if (data->vbus_pin >= 0)
+		at32_select_gpio(data->vbus_pin, 0);
 
 	usba0_pclk.dev = &pdev->dev;
 	usba0_hclk.dev = &pdev->dev;
@@ -1694,7 +1898,8 @@ struct clk *at32_clock_list[] = {
 	&pio2_mck,
 	&pio3_mck,
 	&pio4_mck,
-	&at32_systc0_pclk,
+	&at32_tcb0_t0_clk,
+	&at32_tcb1_t0_clk,
 	&atmel_usart0_usart,
 	&atmel_usart1_usart,
 	&atmel_usart2_usart,
diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c
index 0b286cd53028..097cf4e84052 100644
--- a/arch/avr32/mach-at32ap/intc.c
+++ b/arch/avr32/mach-at32ap/intc.c
@@ -13,7 +13,6 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 
-#include <asm/intc.h>
 #include <asm/io.h>
 
 #include "intc.h"
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
new file mode 100644
index 000000000000..949e2485e278
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -0,0 +1,66 @@
+/*
+ * Low-level Power Management code.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/arch/pm.h>
+
+	.section .bss, "wa", @nobits
+	.global	disable_idle_sleep
+	.type	disable_idle_sleep, @object
+disable_idle_sleep:
+	.int	4
+	.size	disable_idle_sleep, . - disable_idle_sleep
+
+	/* Keep this close to the irq handlers */
+	.section .irq.text, "ax", @progbits
+
+	/*
+	 * void cpu_enter_idle(void)
+	 *
+	 * Put the CPU into "idle" mode, in which it will consume
+	 * significantly less power.
+	 *
+	 * If an interrupt comes along in the window between
+	 * unmask_interrupts and the sleep instruction below, the
+	 * interrupt code will adjust the return address so that we
+	 * never execute the sleep instruction. This is required
+	 * because the AP7000 doesn't unmask interrupts when entering
+	 * sleep modes; later CPUs may not need this workaround.
+	 */
+	.global	cpu_enter_idle
+	.type	cpu_enter_idle, @function
+cpu_enter_idle:
+	mask_interrupts
+	get_thread_info r8
+	ld.w	r9, r8[TI_flags]
+	bld	r9, TIF_NEED_RESCHED
+	brcs	.Lret_from_sleep
+	sbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+	unmask_interrupts
+	sleep	CPU_SLEEP_IDLE
+	.size	cpu_idle_sleep, . - cpu_idle_sleep
+
+	/*
+	 * Common return path for PM functions that don't run from
+	 * SRAM.
+	 */
+	.global cpu_idle_skip_sleep
+	.type	cpu_idle_skip_sleep, @function
+cpu_idle_skip_sleep:
+	mask_interrupts
+	ld.w	r9, r8[TI_flags]
+	cbr	r9, TIF_CPU_GOING_TO_SLEEP
+	st.w	r8[TI_flags], r9
+.Lret_from_sleep:
+	unmask_interrupts
+	retal	r12
+	.size	cpu_idle_skip_sleep, . - cpu_idle_skip_sleep
diff --git a/arch/avr32/mach-at32ap/time-tc.c b/arch/avr32/mach-at32ap/time-tc.c
deleted file mode 100644
index 10265863c982..000000000000
--- a/arch/avr32/mach-at32ap/time-tc.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- *   Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/clocksource.h>
-#include <linux/time.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/sysdev.h>
-#include <linux/err.h>
-
-#include <asm/div64.h>
-#include <asm/sysreg.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-
-#include <asm/arch/time.h>
-
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
-
-/* the count value for the next timer interrupt */
-static u32 expirelo;
-
-/* the I/O registers of the TC module */
-static void __iomem *ioregs;
-
-cycle_t read_cycle_count(void)
-{
-	return (cycle_t)timer_read(ioregs, 0, CV);
-}
-
-struct clocksource clocksource_avr32 = {
-	.name		= "avr32",
-	.rating		= 342,
-	.read		= read_cycle_count,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.shift		= 16,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void avr32_timer_ack(void)
-{
-	u16 count = expirelo;
-
-	/* Ack this timer interrupt and set the next one, use a u16
-	 * variable so it will wrap around correctly */
-	count += cycles_per_jiffy;
-	expirelo = count;
-	timer_write(ioregs, 0, RC, expirelo);
-
-	/* Check to see if we have missed any timer interrupts */
-	count = timer_read(ioregs, 0, CV);
-	if ((count - expirelo) < 0x7fff) {
-		expirelo = count + cycles_per_jiffy;
-		timer_write(ioregs, 0, RC, expirelo);
-	}
-}
-
-u32 avr32_hpt_read(void)
-{
-	return timer_read(ioregs, 0, CV);
-}
-
-static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
-{
-	unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-	unsigned int divs[] = { 4, 8, 16, 32 };
-	int divs_size = ARRAY_SIZE(divs);
-	int i = 0;
-	unsigned long count_hz;
-	unsigned long shift;
-	unsigned long mult;
-	int clock_div = -1;
-	u64 tmp;
-
-	shift = clocksource_avr32.shift;
-
-	do {
-		count_hz = clk_get_rate(pclk) / divs[i];
-		mult = clocksource_hz2mult(count_hz, shift);
-		clocksource_avr32.mult = mult;
-
-		tmp = TICK_NSEC;
-		tmp <<= shift;
-		tmp += mult / 2;
-		do_div(tmp, mult);
-
-		cycles_per_jiffy = tmp;
-	} while (cycles_per_jiffy > cycles_max && ++i < divs_size);
-
-	clock_div = i + 1;
-
-	if (clock_div > divs_size) {
-		pr_debug("timer: could not calculate clock divider\n");
-		return -EFAULT;
-	}
-
-	/* Set the clock divider */
-	timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
-
-	return 0;
-}
-
-int avr32_hpt_init(unsigned int count)
-{
-	struct resource *regs;
-	struct clk *pclk;
-	int irq = -1;
-	int ret = 0;
-
-	ret = -ENXIO;
-
-	irq = platform_get_irq(&at32_systc0_device, 0);
-	if (irq < 0) {
-		pr_debug("timer: could not get irq\n");
-		goto out_error;
-	}
-
-	pclk = clk_get(&at32_systc0_device.dev, "pclk");
-	if (IS_ERR(pclk)) {
-		pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-		goto out_error;
-	}
-	clk_enable(pclk);
-
-	regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-	if (!regs) {
-		pr_debug("timer: could not get resource\n");
-		goto out_error_clk;
-	}
-
-	ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-	if (!ioregs) {
-		pr_debug("timer: could not get ioregs\n");
-		goto out_error_clk;
-	}
-
-	ret = avr32_timer_calc_div_and_set_jiffies(pclk);
-	if (ret)
-		goto out_error_io;
-
-	ret = setup_irq(irq, &timer_irqaction);
-	if (ret) {
-		pr_debug("timer: could not request irq %d: %d\n",
-				irq, ret);
-		goto out_error_io;
-	}
-
-	expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-		* cycles_per_jiffy;
-
-	/* Enable clock and interrupts on RC compare */
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-	timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-	/* Set cycles to first interrupt */
-	timer_write(ioregs, 0,  RC, expirelo);
-
-	printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-			ioregs, irq);
-
-	return 0;
-
-out_error_io:
-	iounmap(ioregs);
-out_error_clk:
-	clk_put(pclk);
-out_error:
-	return ret;
-}
-
-int avr32_hpt_start(void)
-{
-	timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-	return 0;
-}
-
-irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
-	unsigned int sr = timer_read(ioregs, 0, SR);
-
-	if (sr & TIMER_BIT(SR_CPCS)) {
-		/* ack timer interrupt and try to set next interrupt */
-		avr32_timer_ack();
-
-		/*
-		 * Call the generic timer interrupt handler
-		 */
-		write_seqlock(&xtime_lock);
-		do_timer(1);
-		write_sequnlock(&xtime_lock);
-
-		/*
-		 * In UP mode, we call local_timer_interrupt() to do profiling
-		 * and process accounting.
-		 *
-		 * SMP is not supported yet.
-		 */
-		local_timer_interrupt(irq, dev_id);
-
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 480760bde63f..0e64ddc45e37 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -34,9 +34,6 @@ struct page *empty_zero_page;
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-#define START_PFN	(NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-#define MAX_LOW_PFN	(NODE_DATA(0)->bdata->node_low_pfn)
-
 void show_mem(void)
 {
 	int total = 0, reserved = 0, cached = 0;
diff --git a/arch/avr32/oprofile/op_model_avr32.c b/arch/avr32/oprofile/op_model_avr32.c
index e2f876bfc86b..df42325c7f81 100644
--- a/arch/avr32/oprofile/op_model_avr32.c
+++ b/arch/avr32/oprofile/op_model_avr32.c
@@ -16,7 +16,6 @@
 #include <linux/sched.h>
 #include <linux/types.h>
 
-#include <asm/intc.h>
 #include <asm/sysreg.h>
 #include <asm/system.h>
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 589c6aca4803..2dd1f300a5cf 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -31,10 +31,6 @@ config ZONE_DMA
 	bool
 	default y
 
-config SEMAPHORE_SLEEPERS
-	bool
-	default y
-
 config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 0bfbb269e350..053edff6c0d8 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -42,11 +42,6 @@ EXPORT_SYMBOL(ip_fast_csum);
 
 EXPORT_SYMBOL(kernel_thread);
 
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__down_interruptible);
-
 EXPORT_SYMBOL(is_in_rom);
 EXPORT_SYMBOL(bfin_return_from_exception);
 
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S
index 90262691b11a..5ed47228a390 100644
--- a/arch/blackfin/kernel/fixed_code.S
+++ b/arch/blackfin/kernel/fixed_code.S
@@ -101,9 +101,9 @@ ENDPROC (_atomic_ior32)
 
 .align 16
 	/*
-	 * Atomic ior, 32 bit.
+	 * Atomic and, 32 bit.
 	 * Inputs:	P0: memory address to use
-	 *		R0: value to ior
+	 *		R0: value to and
 	 * Outputs:	R0: new contents of the memory address.
 	 *		R1: previous contents of the memory address.
 	 */
@@ -112,13 +112,13 @@ ENTRY(_atomic_and32)
 	R0 = R1 & R0;
 	[P0] = R0;
 	rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_and32)
 
 .align 16
 	/*
-	 * Atomic ior, 32 bit.
+	 * Atomic xor, 32 bit.
 	 * Inputs:	P0: memory address to use
-	 *		R0: value to ior
+	 *		R0: value to xor
 	 * Outputs:	R0: new contents of the memory address.
 	 *		R1: previous contents of the memory address.
 	 */
@@ -127,7 +127,7 @@ ENTRY(_atomic_xor32)
 	R0 = R1 ^ R0;
 	[P0] = R0;
 	rts;
-ENDPROC (_atomic_ior32)
+ENDPROC (_atomic_xor32)
 
 .align 16
 	/*
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 9bdc8f99183a..715b3945e4c7 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -39,8 +39,7 @@
 /* This is an NTP setting */
 #define	TICK_SIZE (tick_nsec / 1000)
 
-static void time_sched_init(irqreturn_t(*timer_routine)
-			(int, void *));
+static void time_sched_init(irq_handler_t timer_routine);
 static unsigned long gettimeoffset(void);
 
 static struct irqaction bfin_timer_irq = {
@@ -64,7 +63,7 @@ static struct irqaction bfin_timer_irq = {
 #define TIME_SCALE 1
 
 static void
-time_sched_init(irqreturn_t(*timer_routine) (int, void *))
+time_sched_init(irq_handler_t timer_routine)
 {
 	u32 tcount;
 
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index a0950c1fd800..40846aa034c4 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -323,7 +323,7 @@ static struct platform_device bf5xx_nand_device = {
 };
 #endif
 
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 static struct platform_device bf54x_sdh_device = {
 	.name = "bfin-sdh",
 	.id = 0,
@@ -636,7 +636,7 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bf5xx_nand_device,
 #endif
 
-#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN)
+#if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
 	&bf54x_sdh_device,
 #endif
 
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 2cbb7a0bc38e..cee54cebbc65 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1369,7 +1369,7 @@ ENTRY(_sys_call_table)
 	.long _sys_epoll_pwait
 	.long _sys_utimensat
 	.long _sys_signalfd
-	.long _sys_ni_syscall
+	.long _sys_timerfd_create
 	.long _sys_eventfd	/* 350 */
 	.long _sys_pread64
 	.long _sys_pwrite64
@@ -1378,6 +1378,9 @@ ENTRY(_sys_call_table)
 	.long _sys_get_robust_list	/* 355 */
 	.long _sys_fallocate
 	.long _sys_semtimedop
+	.long _sys_timerfd_settime
+	.long _sys_timerfd_gettime
+
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
 	.endr
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 9310a7b476e9..525483f0ddf8 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -13,7 +13,7 @@
 #include <linux/swap.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <linux/vmstat.h>
+#include <linux/mm.h>
 #include <asm/arch/svinto.h>
 #include <asm/types.h>
 #include <asm/signal.h>
diff --git a/arch/cris/arch-v10/lib/string.c b/arch/cris/arch-v10/lib/string.c
index 7161a2bef4fe..c7bd6ebdc93c 100644
--- a/arch/cris/arch-v10/lib/string.c
+++ b/arch/cris/arch-v10/lib/string.c
@@ -1,55 +1,59 @@
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# FUNCTION NAME: memcpy()                                                 */
-/*#                                                                         */
-/*# PARAMETERS:  void* dst;   Destination address.                          */
-/*#              void* src;   Source address.                               */
-/*#              int   len;   Number of bytes to copy.                      */
-/*#                                                                         */
-/*# RETURNS:     dst.                                                       */
-/*#                                                                         */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst.  No guarantees */
-/*#              about copying of overlapping memory areas. This routine is */
-/*#              very sensitive to compiler changes in register allocation. */
-/*#              Should really be rewritten to avoid this problem.          */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# HISTORY                                                                 */
-/*#                                                                         */
-/*# DATE      NAME            CHANGES                                       */
-/*# ----      ----            -------                                       */
-/*# 941007    Kenny R         Creation                                      */
-/*# 941011    Kenny R         Lots of optimizations and inlining.           */
-/*# 941129    Ulf A           Adapted for use in libc.                      */
-/*# 950216    HP              N==0 forgotten if non-aligned src/dst.        */
-/*#                           Added some optimizations.                     */
-/*# 001025    HP              Make src and dst char *.  Align dst to	    */
-/*#			      dword, not just word-if-both-src-and-dst-	    */
-/*#			      are-misaligned.				    */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-
-#include <linux/types.h>
-
-void *memcpy(void *pdst,
-             const void *psrc,
-             size_t pn)
+/* A memcpy for CRIS.
+   Copyright (C) 1994-2005 Axis Communications.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   1. Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+   2. Neither the name of Axis Communications nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+   COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+   IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* FIXME: This file should really only be used for reference, as the
+   result is somewhat depending on gcc generating what we expect rather
+   than what we describe.  An assembly file should be used instead.  */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+   modulo 44, so up to the next multiple of 44, we use ordinary code.  */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file.  */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
 {
-  /* Ok.  Now we want the parameters put in special registers.
+  /* Now we want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.
-      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
 
-     If gcc was alright, it really would need no temporaries, and no
-     stack space to save stuff on. */
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
 
   register void *return_dst __asm__ ("r10") = pdst;
-  register char *dst __asm__ ("r13") = pdst;
-  register const char *src __asm__ ("r11") = psrc;
+  register unsigned char *dst __asm__ ("r13") = pdst;
+  register unsigned const char *src __asm__ ("r11") = psrc;
   register int n __asm__ ("r12") = pn;
-  
- 
+
   /* When src is aligned but not dst, this makes a few extra needless
      cycles.  I believe it would take as many to check that the
      re-alignment was unnecessary.  */
@@ -59,167 +63,174 @@ void *memcpy(void *pdst,
       && n >= 3)
   {
     if ((unsigned long) dst & 1)
-    {
-      n--;
-      *(char*)dst = *(char*)src;
-      src++;
-      dst++;
-    }
+      {
+	n--;
+	*dst = *src;
+	src++;
+	dst++;
+      }
 
     if ((unsigned long) dst & 2)
-    {
-      n -= 2;
-      *(short*)dst = *(short*)src;
-      src += 2;
-      dst += 2;
-    }
+      {
+	n -= 2;
+	*(short *) dst = *(short *) src;
+	src += 2;
+	dst += 2;
+      }
   }
 
-  /* Decide which copying method to use. */
-  if (n >= 44*2)                /* Break even between movem and
-                                   move16 is at 38.7*2, but modulo 44. */
-  {
-    /* For large copies we use 'movem' */
-
-  /* It is not optimal to tell the compiler about clobbering any
-     registers; that will move the saving/restoring of those registers
-     to the function prologue/epilogue, and make non-movem sizes
-     suboptimal.
-
-      This method is not foolproof; it assumes that the "asm reg"
-     declarations at the beginning of the function really are used
-     here (beware: they may be moved to temporary registers).
-      This way, we do not have to save/move the registers around into
-     temporaries; we can safely use them straight away.
-
-      If you want to check that the allocation was right; then
-      check the equalities in the first comment.  It should say
-      "r13=r13, r11=r11, r12=r12" */
-    __asm__ volatile ("\n\
-	;; Check that the following is true (same register names on	\n\
-	;; both sides of equal sign, as in r8=r8):			\n\
-	;; %0=r13, %1=r11, %2=r12					\n\
-	;;								\n\
-	;; Save the registers we'll use in the movem process		\n\
-	;; on the stack.						\n\
-	subq	11*4,$sp						\n\
-	movem	$r10,[$sp]						\n\
+  /* Decide which copying method to use.  */
+  if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+    {
+      /* It is not optimal to tell the compiler about clobbering any
+	 registers; that will move the saving/restoring of those registers
+	 to the function prologue/epilogue, and make non-movem sizes
+	 suboptimal.  */
+      __asm__ volatile
+	("\
+	 ;; GCC does promise correct register allocations, but let's	\n\
+	 ;; make sure it keeps its promises.				\n\
+	 .ifnc %0-%1-%2,$r13-$r11-$r12					\n\
+	 .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\"	\n\
+	 .endif								\n\
+									\n\
+	 ;; Save the registers we'll use in the movem process		\n\
+	 ;; on the stack.						\n\
+	 subq	11*4,sp							\n\
+	 movem	r10,[sp]						\n\
 									\n\
-	;; Now we've got this:						\n\
-	;; r11 - src							\n\
-	;; r13 - dst							\n\
-	;; r12 - n							\n\
+	 ;; Now we've got this:						\n\
+	 ;; r11 - src							\n\
+	 ;; r13 - dst							\n\
+	 ;; r12 - n							\n\
 									\n\
-	;; Update n for the first loop					\n\
-	subq	44,$r12							\n\
+	 ;; Update n for the first loop.				\n\
+	 subq	 44,r12							\n\
 0:									\n\
-	movem	[$r11+],$r10						\n\
-	subq	44,$r12							\n\
-	bge	0b							\n\
-	movem	$r10,[$r13+]						\n\
+"
+#ifdef __arch_common_v10_v32
+	 /* Cater to branch offset difference between v32 and v10.  We
+	    assume the branch below has an 8-bit offset.  */
+"	 setf\n"
+#endif
+"	 movem	[r11+],r10						\n\
+	 subq	44,r12							\n\
+	 bge	 0b							\n\
+	 movem	r10,[r13+]						\n\
 									\n\
-	addq	44,$r12 ;; compensate for last loop underflowing n	\n\
+	 ;; Compensate for last loop underflowing n.			\n\
+	 addq	44,r12							\n\
 									\n\
-	;; Restore registers from stack					\n\
-	movem	[$sp+],$r10"
+	 ;; Restore registers from stack.				\n\
+	 movem [sp+],r10"
 
-     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n) 
-     /* Inputs */ : "0" (dst), "1" (src), "2" (n));
-    
-  }
+	 /* Outputs.  */
+	 : "=r" (dst), "=r" (src), "=r" (n)
 
-  /* Either we directly starts copying, using dword copying
-     in a loop, or we copy as much as possible with 'movem' 
-     and then the last block (<44 bytes) is copied here.
-     This will work since 'movem' will have updated src,dst,n. */
+	 /* Inputs.  */
+	 : "0" (dst), "1" (src), "2" (n));
+    }
 
-  while ( n >= 16 )
-  {
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    n -= 16;
-  }
+  while (n >= 16)
+    {
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+
+      n -= 16;
+    }
 
-  /* A switch() is definitely the fastest although it takes a LOT of code.
-   * Particularly if you inline code this.
-   */
   switch (n)
-  {
+    {
     case 0:
       break;
+
     case 1:
-      *(char*)dst = *(char*)src;
+      *dst = *src;
       break;
+
     case 2:
-      *(short*)dst = *(short*)src;
+      *(short *) dst = *(short *) src;
       break;
+
     case 3:
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 4:
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src;
       break;
+
     case 5:
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 6:
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 7:
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 8:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 9:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 10:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 11:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 12:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 13:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 14:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 15:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
-  }
+    }
 
-  return return_dst; /* destination pointer. */
-} /* memcpy() */
+  return return_dst;
+}
diff --git a/arch/cris/arch-v10/lib/usercopy.c b/arch/cris/arch-v10/lib/usercopy.c
index b8e6c0430e5b..b0a608da7bd1 100644
--- a/arch/cris/arch-v10/lib/usercopy.c
+++ b/arch/cris/arch-v10/lib/usercopy.c
@@ -193,7 +193,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
    inaccessible.  */
 
 unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
 {
   /* We want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.
diff --git a/arch/cris/arch-v32/lib/string.c b/arch/cris/arch-v32/lib/string.c
index 6740b2cebae5..c7bd6ebdc93c 100644
--- a/arch/cris/arch-v32/lib/string.c
+++ b/arch/cris/arch-v32/lib/string.c
@@ -1,55 +1,59 @@
-/*#************************************************************************#*/
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# FUNCTION NAME: memcpy()                                                 */
-/*#                                                                         */
-/*# PARAMETERS:  void* dst;   Destination address.                          */
-/*#              void* src;   Source address.                               */
-/*#              int   len;   Number of bytes to copy.                      */
-/*#                                                                         */
-/*# RETURNS:     dst.                                                       */
-/*#                                                                         */
-/*# DESCRIPTION: Copies len bytes of memory from src to dst.  No guarantees */
-/*#              about copying of overlapping memory areas. This routine is */
-/*#              very sensitive to compiler changes in register allocation. */
-/*#              Should really be rewritten to avoid this problem.          */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-/*#                                                                         */
-/*# HISTORY                                                                 */
-/*#                                                                         */
-/*# DATE      NAME            CHANGES                                       */
-/*# ----      ----            -------                                       */
-/*# 941007    Kenny R         Creation                                      */
-/*# 941011    Kenny R         Lots of optimizations and inlining.           */
-/*# 941129    Ulf A           Adapted for use in libc.                      */
-/*# 950216    HP              N==0 forgotten if non-aligned src/dst.        */
-/*#                           Added some optimizations.                     */
-/*# 001025    HP              Make src and dst char *.  Align dst to	    */
-/*#			      dword, not just word-if-both-src-and-dst-	    */
-/*#			      are-misaligned.				    */
-/*#                                                                         */
-/*#-------------------------------------------------------------------------*/
-
-#include <linux/types.h>
-
-void *memcpy(void *pdst,
-             const void *psrc,
-             size_t pn)
+/* A memcpy for CRIS.
+   Copyright (C) 1994-2005 Axis Communications.
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   1. Redistributions of source code must retain the above copyright
+      notice, this list of conditions and the following disclaimer.
+
+   2. Neither the name of Axis Communications nor the names of its
+      contributors may be used to endorse or promote products derived
+      from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY AXIS COMMUNICATIONS AND ITS CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL AXIS
+   COMMUNICATIONS OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+   INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+   IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+   POSSIBILITY OF SUCH DAMAGE.  */
+
+/* FIXME: This file should really only be used for reference, as the
+   result is somewhat depending on gcc generating what we expect rather
+   than what we describe.  An assembly file should be used instead.  */
+
+#include <stddef.h>
+
+/* Break even between movem and move16 is really at 38.7 * 2, but
+   modulo 44, so up to the next multiple of 44, we use ordinary code.  */
+#define MEMCPY_BY_BLOCK_THRESHOLD (44 * 2)
+
+/* No name ambiguities in this file.  */
+__asm__ (".syntax no_register_prefix");
+
+void *
+memcpy(void *pdst, const void *psrc, size_t pn)
 {
-  /* Ok.  Now we want the parameters put in special registers.
+  /* Now we want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.
-      As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
+     As it is now: r10 -> r13; r11 -> r11 (nop); r12 -> r12 (nop).
 
-     If gcc was alright, it really would need no temporaries, and no
-     stack space to save stuff on. */
+     If gcc was allright, it really would need no temporaries, and no
+     stack space to save stuff on.  */
 
   register void *return_dst __asm__ ("r10") = pdst;
-  register char *dst __asm__ ("r13") = pdst;
-  register const char *src __asm__ ("r11") = psrc;
+  register unsigned char *dst __asm__ ("r13") = pdst;
+  register unsigned const char *src __asm__ ("r11") = psrc;
   register int n __asm__ ("r12") = pn;
 
-
   /* When src is aligned but not dst, this makes a few extra needless
      cycles.  I believe it would take as many to check that the
      re-alignment was unnecessary.  */
@@ -59,161 +63,174 @@ void *memcpy(void *pdst,
       && n >= 3)
   {
     if ((unsigned long) dst & 1)
-    {
-      n--;
-      *(char*)dst = *(char*)src;
-      src++;
-      dst++;
-    }
+      {
+	n--;
+	*dst = *src;
+	src++;
+	dst++;
+      }
 
     if ((unsigned long) dst & 2)
-    {
-      n -= 2;
-      *(short*)dst = *(short*)src;
-      src += 2;
-      dst += 2;
-    }
+      {
+	n -= 2;
+	*(short *) dst = *(short *) src;
+	src += 2;
+	dst += 2;
+      }
   }
 
-  /* Decide which copying method to use.  Movem is dirt cheap, so the
-     overheap is low enough to always use the minimum block size as the
-     threshold.  */
-  if (n >= 44)
-  {
-    /* For large copies we use 'movem' */
-
-  /* It is not optimal to tell the compiler about clobbering any
-     registers; that will move the saving/restoring of those registers
-     to the function prologue/epilogue, and make non-movem sizes
-     suboptimal.  */
-    __asm__ volatile ("							\n\
-        ;; Check that the register asm declaration got right.		\n\
-        ;; The GCC manual explicitly says TRT will happen.		\n\
-	.ifnc %0-%1-%2,$r13-$r11-$r12					\n\
-	.err								\n\
-	.endif								\n\
-									\n\
-	;; Save the registers we'll use in the movem process		\n\
+  /* Decide which copying method to use.  */
+  if (n >= MEMCPY_BY_BLOCK_THRESHOLD)
+    {
+      /* It is not optimal to tell the compiler about clobbering any
+	 registers; that will move the saving/restoring of those registers
+	 to the function prologue/epilogue, and make non-movem sizes
+	 suboptimal.  */
+      __asm__ volatile
+	("\
+	 ;; GCC does promise correct register allocations, but let's	\n\
+	 ;; make sure it keeps its promises.				\n\
+	 .ifnc %0-%1-%2,$r13-$r11-$r12					\n\
+	 .error \"GCC reg alloc bug: %0-%1-%4 != $r13-$r12-$r11\"	\n\
+	 .endif								\n\
 									\n\
-	;; on the stack.						\n\
-	subq 	11*4,$sp						\n\
-	movem	$r10,[$sp]						\n\
+	 ;; Save the registers we'll use in the movem process		\n\
+	 ;; on the stack.						\n\
+	 subq	11*4,sp							\n\
+	 movem	r10,[sp]						\n\
 									\n\
-        ;; Now we've got this:						\n\
-	;; r11 - src							\n\
-	;; r13 - dst							\n\
-	;; r12 - n							\n\
+	 ;; Now we've got this:						\n\
+	 ;; r11 - src							\n\
+	 ;; r13 - dst							\n\
+	 ;; r12 - n							\n\
 									\n\
-        ;; Update n for the first loop					\n\
-        subq    44,$r12							\n\
+	 ;; Update n for the first loop.				\n\
+	 subq	 44,r12							\n\
 0:									\n\
-	movem	[$r11+],$r10						\n\
-        subq   44,$r12							\n\
-        bge     0b							\n\
-	movem	$r10,[$r13+]						\n\
+"
+#ifdef __arch_common_v10_v32
+	 /* Cater to branch offset difference between v32 and v10.  We
+	    assume the branch below has an 8-bit offset.  */
+"	 setf\n"
+#endif
+"	 movem	[r11+],r10						\n\
+	 subq	44,r12							\n\
+	 bge	 0b							\n\
+	 movem	r10,[r13+]						\n\
 									\n\
-        addq   44,$r12  ;; compensate for last loop underflowing n	\n\
+	 ;; Compensate for last loop underflowing n.			\n\
+	 addq	44,r12							\n\
 									\n\
-	;; Restore registers from stack					\n\
-        movem [$sp+],$r10"
+	 ;; Restore registers from stack.				\n\
+	 movem [sp+],r10"
 
-     /* Outputs */ : "=r" (dst), "=r" (src), "=r" (n)
-     /* Inputs */ : "0" (dst), "1" (src), "2" (n));
+	 /* Outputs.  */
+	 : "=r" (dst), "=r" (src), "=r" (n)
 
-  }
+	 /* Inputs.  */
+	 : "0" (dst), "1" (src), "2" (n));
+    }
 
-  /* Either we directly starts copying, using dword copying
-     in a loop, or we copy as much as possible with 'movem'
-     and then the last block (<44 bytes) is copied here.
-     This will work since 'movem' will have updated src,dst,n. */
+  while (n >= 16)
+    {
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
 
-  while ( n >= 16 )
-  {
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    *((long*)dst)++ = *((long*)src)++;
-    n -= 16;
-  }
+      n -= 16;
+    }
 
-  /* A switch() is definitely the fastest although it takes a LOT of code.
-   * Particularly if you inline code this.
-   */
   switch (n)
-  {
+    {
     case 0:
       break;
+
     case 1:
-      *(char*)dst = *(char*)src;
+      *dst = *src;
       break;
+
     case 2:
-      *(short*)dst = *(short*)src;
+      *(short *) dst = *(short *) src;
       break;
+
     case 3:
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 4:
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src;
       break;
+
     case 5:
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 6:
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 7:
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 8:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 9:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 10:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 11:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
+
     case 12:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src;
       break;
+
     case 13:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *dst = *src;
       break;
+
     case 14:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *(short*)dst = *(short*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src;
       break;
+
     case 15:
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((long*)dst)++ = *((long*)src)++;
-      *((short*)dst)++ = *((short*)src)++;
-      *(char*)dst = *(char*)src;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(long *) dst = *(long *) src; dst += 4; src += 4;
+      *(short *) dst = *(short *) src; dst += 2; src += 2;
+      *dst = *src;
       break;
-  }
+    }
 
-  return return_dst; /* destination pointer. */
-} /* memcpy() */
+  return return_dst;
+}
diff --git a/arch/cris/arch-v32/lib/usercopy.c b/arch/cris/arch-v32/lib/usercopy.c
index 04d0cf35a276..0b5b70d5f58a 100644
--- a/arch/cris/arch-v32/lib/usercopy.c
+++ b/arch/cris/arch-v32/lib/usercopy.c
@@ -161,7 +161,7 @@ __copy_user (void __user *pdst, const void *psrc, unsigned long pn)
    inaccessible.  */
 
 unsigned long
-__copy_user_zeroing (void __user *pdst, const void *psrc, unsigned long pn)
+__copy_user_zeroing(void *pdst, const void __user *psrc, unsigned long pn)
 {
   /* We want the parameters put in special registers.
      Make sure the compiler is able to make something useful of this.
diff --git a/arch/cris/kernel/Makefile b/arch/cris/kernel/Makefile
index c8e8ea570989..ee7bcd4d20b2 100644
--- a/arch/cris/kernel/Makefile
+++ b/arch/cris/kernel/Makefile
@@ -5,8 +5,7 @@
 
 extra-y	:= vmlinux.lds
 
-obj-y   := process.o traps.o irq.o ptrace.o setup.o \
-	   time.o sys_cris.o semaphore.o
+obj-y   := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o
 
 obj-$(CONFIG_MODULES)    += crisksyms.o
 obj-$(CONFIG_MODULES)	 += module.o
diff --git a/arch/cris/kernel/crisksyms.c b/arch/cris/kernel/crisksyms.c
index 62f0e752915a..7ac000f6a888 100644
--- a/arch/cris/kernel/crisksyms.c
+++ b/arch/cris/kernel/crisksyms.c
@@ -9,7 +9,6 @@
 #include <linux/string.h>
 #include <linux/tty.h>
 
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
@@ -49,12 +48,6 @@ EXPORT_SYMBOL(__negdi2);
 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(iounmap);
 
-/* Semaphore functions */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-
 /* Userspace access functions */
 EXPORT_SYMBOL(__copy_user_zeroing);
 EXPORT_SYMBOL(__copy_user);
diff --git a/arch/cris/kernel/semaphore.c b/arch/cris/kernel/semaphore.c
deleted file mode 100644
index f137a439041f..000000000000
--- a/arch/cris/kernel/semaphore.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- *  Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <asm/semaphore-helper.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-#define DOWN_VAR				\
-	struct task_struct *tsk = current;	\
-	wait_queue_t wait;			\
-	init_waitqueue_entry(&wait, tsk);
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	tsk->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		tsk->state = (task_state);	\
-	}					\
-	tsk->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DOWN_VAR
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int ret = 0;
-	DOWN_VAR
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, tsk);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}
diff --git a/arch/frv/kernel/Makefile b/arch/frv/kernel/Makefile
index e8f73ed28b52..c36f70b6699a 100644
--- a/arch/frv/kernel/Makefile
+++ b/arch/frv/kernel/Makefile
@@ -9,7 +9,7 @@ extra-y:= head.o init_task.o vmlinux.lds
 
 obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o kernel_thread.o \
 	 kernel_execve.o process.o traps.o ptrace.o signal.o dma.o \
-	 sys_frv.o time.o semaphore.o setup.o frv_ksyms.o \
+	 sys_frv.o time.o setup.o frv_ksyms.o \
 	 debug-stub.o irq.o sleep.o uaccess.o
 
 obj-$(CONFIG_GDBSTUB)		+= gdb-stub.o gdb-io.o
diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S
index d3b9253d862a..bf35f33e48c9 100644
--- a/arch/frv/kernel/entry-table.S
+++ b/arch/frv/kernel/entry-table.S
@@ -316,8 +316,14 @@ __trap_fixup_kernel_data_tlb_miss:
 	.section	.trap.vector
 	.org		TBR_TT_TRAP0 >> 2
 	.long		system_call
-	.rept		126
+	.rept		119
 	.long		__entry_unsupported_trap
 	.endr
+
+	# userspace atomic op emulation, traps 120-126
+	.rept		7
+	.long		__entry_atomic_op
+	.endr
+	
 	.org		TBR_TT_BREAK >> 2
 	.long		__entry_debug_exception
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index f36d7f4a7c25..b8a4b94779b1 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -656,6 +656,26 @@ __entry_debug_exception:
 
 ###############################################################################
 #
+# handle atomic operation emulation for userspace
+#
+###############################################################################
+	.globl		__entry_atomic_op
+__entry_atomic_op:
+	LEDS		0x6012
+	sethi.p		%hi(atomic_operation),gr5
+	setlo		%lo(atomic_operation),gr5
+	movsg		esfr1,gr8
+	movsg		epcr0,gr9
+	movsg		esr0,gr10
+
+	# now that we've accessed the exception regs, we can enable exceptions
+	movsg		psr,gr4
+	ori		gr4,#PSR_ET,gr4
+	movgs		gr4,psr
+	jmpl		@(gr5,gr0)	; call atomic_operation(esfr1,epcr0,esr0)
+
+###############################################################################
+#
 # handle media exception
 #
 ###############################################################################
diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c
index f772704b3d28..0316b3c50eff 100644
--- a/arch/frv/kernel/frv_ksyms.c
+++ b/arch/frv/kernel/frv_ksyms.c
@@ -12,7 +12,6 @@
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/hardirq.h>
 #include <asm/cacheflush.h>
diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc
index d424cd2eb213..bff66628b99a 100644
--- a/arch/frv/kernel/head.inc
+++ b/arch/frv/kernel/head.inc
@@ -46,5 +46,5 @@
 #ifdef CONFIG_MMU
 __sdram_base = 0x00000000		/* base address to which SDRAM relocated */
 #else
-__sdram_base = 0xc0000000		/* base address to which SDRAM relocated */
+__sdram_base = __page_offset		/* base address to which SDRAM relocated */
 #endif
diff --git a/arch/frv/kernel/semaphore.c b/arch/frv/kernel/semaphore.c
deleted file mode 100644
index 7ee3a147b471..000000000000
--- a/arch/frv/kernel/semaphore.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* semaphore.c: FR-V semaphores
- *
- * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- * - Derived from lib/rwsem-spinlock.c
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-
-struct sem_waiter {
-	struct list_head	list;
-	struct task_struct	*task;
-};
-
-#ifdef CONFIG_DEBUG_SEMAPHORE
-void semtrace(struct semaphore *sem, const char *str)
-{
-	if (sem->debug)
-		printk("[%d] %s({%d,%d})\n",
-		       current->pid,
-		       str,
-		       sem->counter,
-		       list_empty(&sem->wait_list) ? 0 : 1);
-}
-#else
-#define semtrace(SEM,STR) do { } while(0)
-#endif
-
-/*
- * wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __down(struct semaphore *sem, unsigned long flags)
-{
-	struct task_struct *tsk = current;
-	struct sem_waiter waiter;
-
-	semtrace(sem, "Entering __down");
-
-	/* set up my own style of waitqueue */
-	waiter.task = tsk;
-	get_task_struct(tsk);
-
-	list_add_tail(&waiter.list, &sem->wait_list);
-
-	/* we don't need to touch the semaphore struct anymore */
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
-
-	/* wait to be given the semaphore */
-	set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-
-	for (;;) {
-		if (list_empty(&waiter.list))
-			break;
-		schedule();
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	}
-
-	tsk->state = TASK_RUNNING;
-	semtrace(sem, "Leaving __down");
-}
-
-EXPORT_SYMBOL(__down);
-
-/*
- * interruptibly wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-int __down_interruptible(struct semaphore *sem, unsigned long flags)
-{
-	struct task_struct *tsk = current;
-	struct sem_waiter waiter;
-	int ret;
-
-	semtrace(sem,"Entering __down_interruptible");
-
-	/* set up my own style of waitqueue */
-	waiter.task = tsk;
-	get_task_struct(tsk);
-
-	list_add_tail(&waiter.list, &sem->wait_list);
-
-	/* we don't need to touch the semaphore struct anymore */
-	set_task_state(tsk, TASK_INTERRUPTIBLE);
-
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
-
-	/* wait to be given the semaphore */
-	ret = 0;
-	for (;;) {
-		if (list_empty(&waiter.list))
-			break;
-		if (unlikely(signal_pending(current)))
-			goto interrupted;
-		schedule();
-		set_task_state(tsk, TASK_INTERRUPTIBLE);
-	}
-
- out:
-	tsk->state = TASK_RUNNING;
-	semtrace(sem, "Leaving __down_interruptible");
-	return ret;
-
- interrupted:
-	spin_lock_irqsave(&sem->wait_lock, flags);
-
-	if (!list_empty(&waiter.list)) {
-		list_del(&waiter.list);
-		ret = -EINTR;
-	}
-
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
-	if (ret == -EINTR)
-		put_task_struct(current);
-	goto out;
-}
-
-EXPORT_SYMBOL(__down_interruptible);
-
-/*
- * release a single token back to a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __up(struct semaphore *sem)
-{
-	struct task_struct *tsk;
-	struct sem_waiter *waiter;
-
-	semtrace(sem,"Entering __up");
-
-	/* grant the token to the process at the front of the queue */
-	waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
-
-	/* We must be careful not to touch 'waiter' after we set ->task = NULL.
-	 * It is allocated on the waiter's stack and may become invalid at
-	 * any time after that point (due to a wakeup from another source).
-	 */
-	list_del_init(&waiter->list);
-	tsk = waiter->task;
-	mb();
-	waiter->task = NULL;
-	wake_up_process(tsk);
-	put_task_struct(tsk);
-
-	semtrace(sem,"Leaving __up");
-}
-
-EXPORT_SYMBOL(__up);
diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S
index b5275fa9cd0d..b06668670fcc 100644
--- a/arch/frv/kernel/switch_to.S
+++ b/arch/frv/kernel/switch_to.S
@@ -102,13 +102,6 @@ __switch_to:
 	movgs		gr14,lr
 	bar
 
-	srli		gr15,#28,gr5
-	subicc		gr5,#0xc,gr0,icc0
-	beq		icc0,#0,111f
-	break
-	nop
-111:
-
 	# jump to __switch_back or ret_from_fork as appropriate
 	# - move prev to GR8
 	movgs		gr4,psr
diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c
index 2e6098c85578..7089c2428b3f 100644
--- a/arch/frv/kernel/traps.c
+++ b/arch/frv/kernel/traps.c
@@ -73,7 +73,7 @@ asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, un
 		      epcr0, esr0, esfr1);
 
 	info.si_errno	= 0;
-	info.si_addr	= (void *) ((epcr0 & EPCR0_PC) ? (epcr0 & EPCR0_PC) : __frame->pc);
+	info.si_addr	= (void *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc);
 
 	switch (__frame->tbr & TBR_TT) {
 	case TBR_TT_ILLEGAL_INSTR:
@@ -102,6 +102,233 @@ asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, un
 
 /*****************************************************************************/
 /*
+ * handle atomic operations with errors
+ * - arguments in gr8, gr9, gr10
+ * - original memory value placed in gr5
+ * - replacement memory value placed in gr9
+ */
+asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0,
+				 unsigned long esr0)
+{
+	static DEFINE_SPINLOCK(atomic_op_lock);
+	unsigned long x, y, z, *p;
+	mm_segment_t oldfs;
+	siginfo_t info;
+	int ret;
+
+	y = 0;
+	z = 0;
+
+	oldfs = get_fs();
+	if (!user_mode(__frame))
+		set_fs(KERNEL_DS);
+
+	switch (__frame->tbr & TBR_TT) {
+		/* TIRA gr0,#120
+		 * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new)
+		 */
+	case TBR_TT_ATOMIC_CMPXCHG32:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+		y = __frame->gr10;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			if (z != x)
+				goto done;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (z != x)
+					goto done2;
+
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#121
+		 * u32 __atomic_kernel_xchg32(void *v, u32 new)
+		 */
+	case TBR_TT_ATOMIC_XCHG32:
+		p = (unsigned long *) __frame->gr8;
+		y = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#122
+		 * ulong __atomic_kernel_XOR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_XOR:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#123
+		 * ulong __atomic_kernel_OR_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_OR:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x ^ z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#124
+		 * ulong __atomic_kernel_AND_return(ulong i, ulong *v)
+		 */
+	case TBR_TT_ATOMIC_AND:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = x & z;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#125
+		 * int __atomic_user_sub_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_SUB:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z - x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+		/* TIRA gr0,#126
+		 * int __atomic_user_add_return(atomic_t *v, int i)
+		 */
+	case TBR_TT_ATOMIC_ADD:
+		p = (unsigned long *) __frame->gr8;
+		x = __frame->gr9;
+
+		for (;;) {
+			ret = get_user(z, p);
+			if (ret < 0)
+				goto error;
+
+			spin_lock_irq(&atomic_op_lock);
+
+			if (__get_user(z, p) == 0) {
+				y = z + x;
+				if (__put_user(y, p) == 0)
+					goto done2;
+				goto error2;
+			}
+
+			spin_unlock_irq(&atomic_op_lock);
+		}
+
+	default:
+		BUG();
+	}
+
+done2:
+	spin_unlock_irq(&atomic_op_lock);
+done:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->gr5 = z;
+	__frame->gr9 = y;
+	return;
+
+error2:
+	spin_unlock_irq(&atomic_op_lock);
+error:
+	if (!user_mode(__frame))
+		set_fs(oldfs);
+	__frame->pc -= 4;
+
+	die_if_kernel("-- Atomic Op Error --\n");
+
+	info.si_signo	= SIGSEGV;
+	info.si_code	= SEGV_ACCERR;
+	info.si_errno	= 0;
+	info.si_addr	= (void *) __frame->pc;
+
+	force_sig_info(info.si_signo, &info, current);
+}
+
+/*****************************************************************************/
+/*
  *
  */
 asmlinkage void media_exception(unsigned long msr0, unsigned long msr1)
diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h
index 7481797ab382..0c7bf39dc729 100644
--- a/arch/frv/mb93090-mb00/pci-frv.h
+++ b/arch/frv/mb93090-mb00/pci-frv.h
@@ -17,8 +17,6 @@
 #define PCI_PROBE_BIOS		0x0001
 #define PCI_PROBE_CONF1		0x0002
 #define PCI_PROBE_CONF2		0x0004
-#define PCI_NO_SORT		0x0100
-#define PCI_BIOS_SORT		0x0200
 #define PCI_NO_CHECKS		0x0400
 #define PCI_ASSIGN_ROMS		0x1000
 #define PCI_BIOS_IRQ_SCAN	0x2000
diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c
index 6d51f133fb23..f003cfa68b7a 100644
--- a/arch/frv/mb93090-mb00/pci-vdk.c
+++ b/arch/frv/mb93090-mb00/pci-vdk.c
@@ -199,58 +199,6 @@ static struct pci_ops * __init pci_check_direct(void)
 }
 
 /*
- * Several buggy motherboards address only 16 devices and mirror
- * them to next 16 IDs. We try to detect this `feature' on all
- * primary buses (those containing host bridges as they are
- * expected to be unique) and remove the ghost devices.
- */
-
-static void __init pcibios_fixup_ghosts(struct pci_bus *b)
-{
-	struct list_head *ln, *mn;
-	struct pci_dev *d, *e;
-	int mirror = PCI_DEVFN(16,0);
-	int seen_host_bridge = 0;
-	int i;
-
-	for (ln=b->devices.next; ln != &b->devices; ln=ln->next) {
-		d = pci_dev_b(ln);
-		if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
-			seen_host_bridge++;
-		for (mn=ln->next; mn != &b->devices; mn=mn->next) {
-			e = pci_dev_b(mn);
-			if (e->devfn != d->devfn + mirror ||
-			    e->vendor != d->vendor ||
-			    e->device != d->device ||
-			    e->class != d->class)
-				continue;
-			for(i=0; i<PCI_NUM_RESOURCES; i++)
-				if (e->resource[i].start != d->resource[i].start ||
-				    e->resource[i].end != d->resource[i].end ||
-				    e->resource[i].flags != d->resource[i].flags)
-					continue;
-			break;
-		}
-		if (mn == &b->devices)
-			return;
-	}
-	if (!seen_host_bridge)
-		return;
-	printk("PCI: Ignoring ghost devices on bus %02x\n", b->number);
-
-	ln = &b->devices;
-	while (ln->next != &b->devices) {
-		d = pci_dev_b(ln->next);
-		if (d->devfn >= mirror) {
-			list_del(&d->global_list);
-			list_del(&d->bus_list);
-			kfree(d);
-		} else
-			ln = ln->next;
-	}
-}
-
-/*
  * Discover remaining PCI buses in case there are peer host bridges.
  * We use the number of last PCI bus provided by the PCI BIOS.
  */
@@ -356,7 +304,6 @@ void __init pcibios_fixup_bus(struct pci_bus *bus)
 #if 0
 	printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
 #endif
-	pcibios_fixup_ghosts(bus);
 	pci_read_bridge_bases(bus);
 
 	if (bus->number == 0) {
diff --git a/arch/frv/mm/highmem.c b/arch/frv/mm/highmem.c
index 7f77db7fabc7..eadd07658075 100644
--- a/arch/frv/mm/highmem.c
+++ b/arch/frv/mm/highmem.c
@@ -36,6 +36,3 @@ struct page *kmap_atomic_to_page(void *ptr)
 {
 	return virt_to_page(ptr);
 }
-
-
-EXPORT_SYMBOL(kmap_atomic_to_page);
diff --git a/arch/h8300/kernel/Makefile b/arch/h8300/kernel/Makefile
index 874f6aefee65..6c248c3c5c3b 100644
--- a/arch/h8300/kernel/Makefile
+++ b/arch/h8300/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y := vmlinux.lds
 
 obj-y := process.o traps.o ptrace.o irq.o \
-	 sys_h8300.o time.o semaphore.o signal.o \
+	 sys_h8300.o time.o signal.o \
          setup.o gpio.o init_task.o syscalls.o \
 	 entry.o
 
diff --git a/arch/h8300/kernel/h8300_ksyms.c b/arch/h8300/kernel/h8300_ksyms.c
index d1b15267ac81..6866bd9c7fb4 100644
--- a/arch/h8300/kernel/h8300_ksyms.c
+++ b/arch/h8300/kernel/h8300_ksyms.c
@@ -12,7 +12,6 @@
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/current.h>
 #include <asm/gpio.h>
diff --git a/arch/h8300/kernel/semaphore.c b/arch/h8300/kernel/semaphore.c
deleted file mode 100644
index d12cbbfe6ebd..000000000000
--- a/arch/h8300/kernel/semaphore.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	current->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		current->state = (task_state);	\
-	}					\
-	current->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int ret = 0;
-
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, current);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index dff9edfc7465..ed21737a00c5 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -18,6 +18,7 @@ config IA64
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
+	select HAVE_KRETPROBES
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
@@ -155,6 +156,8 @@ config IA64_HP_ZX1_SWIOTLB
 
 config IA64_SGI_SN2
 	bool "SGI-SN2"
+	select NUMA
+	select ACPI_NUMA
 	help
 	  Selecting this option will optimize the kernel for use on sn2 based
 	  systems, but the resulting kernel binary will not run on other
@@ -280,6 +283,17 @@ config FORCE_MAX_ZONEORDER
 	default "17" if HUGETLB_PAGE
 	default "11"
 
+config VIRT_CPU_ACCOUNTING
+	bool "Deterministic task and CPU time accounting"
+	default n
+	help
+	  Select this option to enable more accurate task and CPU time
+	  accounting.  This is done by reading a CPU counter on each
+	  kernel entry and exit and on transitions within the kernel
+	  between system, softirq and hardirq state, so there is a
+	  small performance impact.
+	  If in doubt, say N here.
+
 config SMP
 	bool "Symmetric multi-processing support"
 	help
@@ -608,6 +622,9 @@ config IRQ_PER_CPU
 	bool
 	default y
 
+config IOMMU_HELPER
+	def_bool (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC)
+
 source "arch/ia64/hp/sim/Kconfig"
 
 source "arch/ia64/Kconfig.debug"
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index b916ccfdef84..f1645c4f7039 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -11,6 +11,8 @@
 # Copyright (C) 1998-2004 by David Mosberger-Tang <davidm@hpl.hp.com>
 #
 
+KBUILD_DEFCONFIG := generic_defconfig
+
 NM := $(CROSS_COMPILE)nm -B
 READELF := $(CROSS_COMPILE)readelf
 
diff --git a/arch/ia64/defconfig b/arch/ia64/configs/generic_defconfig
index 0210545e7f61..0210545e7f61 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/configs/generic_defconfig
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 94e57109fad6..8f6bcfe1dada 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -71,7 +71,7 @@ hwsw_init (void)
 #ifdef CONFIG_IA64_GENERIC
 		/* Better to have normal DMA than panic */
 		printk(KERN_WARNING "%s: Failed to initialize software I/O TLB,"
-		       " reverting to hpzx1 platform vector\n", __FUNCTION__);
+		       " reverting to hpzx1 platform vector\n", __func__);
 		machvec_init("hpzx1");
 #else
 		panic("Unable to initialize software I/O TLB services");
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index a94445422cc6..9409de5c9441 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -35,6 +35,7 @@
 #include <linux/nodemask.h>
 #include <linux/bitops.h>         /* hweight64() */
 #include <linux/crash_dump.h>
+#include <linux/iommu-helper.h>
 
 #include <asm/delay.h>		/* ia64_get_itc() */
 #include <asm/io.h>
@@ -460,6 +461,13 @@ get_iovp_order (unsigned long size)
 	return order;
 }
 
+static unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr,
+				 unsigned int bitshiftcnt)
+{
+	return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3)
+		+ bitshiftcnt;
+}
+
 /**
  * sba_search_bitmap - find free space in IO PDIR resource bitmap
  * @ioc: IO MMU structure which owns the pdir we are interested in.
@@ -471,15 +479,25 @@ get_iovp_order (unsigned long size)
  * Cool perf optimization: search for log2(size) bits at a time.
  */
 static SBA_INLINE unsigned long
-sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
+sba_search_bitmap(struct ioc *ioc, struct device *dev,
+		  unsigned long bits_wanted, int use_hint)
 {
 	unsigned long *res_ptr;
 	unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
-	unsigned long flags, pide = ~0UL;
+	unsigned long flags, pide = ~0UL, tpide;
+	unsigned long boundary_size;
+	unsigned long shift;
+	int ret;
 
 	ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0);
 	ASSERT(res_ptr < res_end);
 
+	boundary_size = (unsigned long long)dma_get_seg_boundary(dev) + 1;
+	boundary_size = ALIGN(boundary_size, 1ULL << iovp_shift) >> iovp_shift;
+
+	BUG_ON(ioc->ibase & ~iovp_mask);
+	shift = ioc->ibase >> iovp_shift;
+
 	spin_lock_irqsave(&ioc->res_lock, flags);
 
 	/* Allow caller to force a search through the entire resource space */
@@ -504,9 +522,7 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
 			if (likely(*res_ptr != ~0UL)) {
 				bitshiftcnt = ffz(*res_ptr);
 				*res_ptr |= (1UL << bitshiftcnt);
-				pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
-				pide <<= 3;	/* convert to bit address */
-				pide += bitshiftcnt;
+				pide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
 				ioc->res_bitshift = bitshiftcnt + bits_wanted;
 				goto found_it;
 			}
@@ -529,17 +545,19 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
 		base_mask = RESMAP_MASK(bits_wanted);
 		mask = base_mask << bitshiftcnt;
 
-		DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+		DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
 		for(; res_ptr < res_end ; res_ptr++)
 		{ 
 			DBG_RES("    %p %lx %lx\n", res_ptr, mask, *res_ptr);
 			ASSERT(0 != mask);
 			for (; mask ; mask <<= o, bitshiftcnt += o) {
-				if(0 == ((*res_ptr) & mask)) {
+				tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt);
+				ret = iommu_is_span_boundary(tpide, bits_wanted,
+							     shift,
+							     boundary_size);
+				if ((0 == ((*res_ptr) & mask)) && !ret) {
 					*res_ptr |= mask;     /* mark resources busy! */
-					pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
-					pide <<= 3;	/* convert to bit address */
-					pide += bitshiftcnt;
+					pide = tpide;
 					ioc->res_bitshift = bitshiftcnt + bits_wanted;
 					goto found_it;
 				}
@@ -560,6 +578,11 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
 		end = res_end - qwords;
 
 		for (; res_ptr < end; res_ptr++) {
+			tpide = ptr_to_pide(ioc, res_ptr, 0);
+			ret = iommu_is_span_boundary(tpide, bits_wanted,
+						     shift, boundary_size);
+			if (ret)
+				goto next_ptr;
 			for (i = 0 ; i < qwords ; i++) {
 				if (res_ptr[i] != 0)
 					goto next_ptr;
@@ -572,8 +595,7 @@ sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted, int use_hint)
 				res_ptr[i] = ~0UL;
 			res_ptr[i] |= RESMAP_MASK(bits);
 
-			pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
-			pide <<= 3;	/* convert to bit address */
+			pide = tpide;
 			res_ptr += qwords;
 			ioc->res_bitshift = bits;
 			goto found_it;
@@ -605,7 +627,7 @@ found_it:
  * resource bit map.
  */
 static int
-sba_alloc_range(struct ioc *ioc, size_t size)
+sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size)
 {
 	unsigned int pages_needed = size >> iovp_shift;
 #ifdef PDIR_SEARCH_TIMING
@@ -622,9 +644,9 @@ sba_alloc_range(struct ioc *ioc, size_t size)
 	/*
 	** "seek and ye shall find"...praying never hurts either...
 	*/
-	pide = sba_search_bitmap(ioc, pages_needed, 1);
+	pide = sba_search_bitmap(ioc, dev, pages_needed, 1);
 	if (unlikely(pide >= (ioc->res_size << 3))) {
-		pide = sba_search_bitmap(ioc, pages_needed, 0);
+		pide = sba_search_bitmap(ioc, dev, pages_needed, 0);
 		if (unlikely(pide >= (ioc->res_size << 3))) {
 #if DELAYED_RESOURCE_CNT > 0
 			unsigned long flags;
@@ -653,7 +675,7 @@ sba_alloc_range(struct ioc *ioc, size_t size)
 			}
 			spin_unlock_irqrestore(&ioc->saved_lock, flags);
 
-			pide = sba_search_bitmap(ioc, pages_needed, 0);
+			pide = sba_search_bitmap(ioc, dev, pages_needed, 0);
 			if (unlikely(pide >= (ioc->res_size << 3)))
 				panic(__FILE__ ": I/O MMU @ %p is out of mapping resources\n",
 				      ioc->ioc_hpa);
@@ -679,7 +701,7 @@ sba_alloc_range(struct ioc *ioc, size_t size)
 #endif
 
 	DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
-		__FUNCTION__, size, pages_needed, pide,
+		__func__, size, pages_needed, pide,
 		(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
 		ioc->res_bitshift );
 
@@ -722,8 +744,8 @@ sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
 			m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
 			bits_not_wanted = 0;
 
-			DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __FUNCTION__, (uint) iova, size,
-		        	bits_not_wanted, m, pide, res_ptr, *res_ptr);
+			DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", __func__, (uint) iova, size,
+			        bits_not_wanted, m, pide, res_ptr, *res_ptr);
 
 			ASSERT(m != 0);
 			ASSERT(bits_not_wanted);
@@ -936,12 +958,11 @@ sba_map_single(struct device *dev, void *addr, size_t size, int dir)
 	spin_unlock_irqrestore(&ioc->res_lock, flags);
 #endif
 
-	pide = sba_alloc_range(ioc, size);
+	pide = sba_alloc_range(ioc, dev, size);
 
 	iovp = (dma_addr_t) pide << iovp_shift;
 
-	DBG_RUN("%s() 0x%p -> 0x%lx\n",
-		__FUNCTION__, addr, (long) iovp | offset);
+	DBG_RUN("%s() 0x%p -> 0x%lx\n", __func__, addr, (long) iovp | offset);
 
 	pdir_start = &(ioc->pdir_base[pide]);
 
@@ -1029,8 +1050,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
 #endif
 	offset = iova & ~iovp_mask;
 
-	DBG_RUN("%s() iovp 0x%lx/%x\n",
-		__FUNCTION__, (long) iova, size);
+	DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
 
 	iova ^= offset;        /* clear offset bits */
 	size += offset;
@@ -1375,7 +1395,7 @@ sba_coalesce_chunks(struct ioc *ioc, struct device *dev,
 		dma_len = (dma_len + dma_offset + ~iovp_mask) & iovp_mask;
 		ASSERT(dma_len <= DMA_CHUNK_SIZE);
 		dma_sg->dma_address = (dma_addr_t) (PIDE_FLAG
-			| (sba_alloc_range(ioc, dma_len) << iovp_shift)
+			| (sba_alloc_range(ioc, dev, dma_len) << iovp_shift)
 			| dma_offset);
 		n_mappings++;
 	}
@@ -1404,7 +1424,7 @@ int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, int di
 	struct scatterlist *sg;
 #endif
 
-	DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+	DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
 	ioc = GET_IOC(dev);
 	ASSERT(ioc);
 
@@ -1468,7 +1488,7 @@ int sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, int di
 #endif
 
 	ASSERT(coalesced == filled);
-	DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+	DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
 
 	return filled;
 }
@@ -1491,7 +1511,7 @@ void sba_unmap_sg (struct device *dev, struct scatterlist *sglist, int nents, in
 #endif
 
 	DBG_RUN_SG("%s() START %d entries,  %p,%x\n",
-		__FUNCTION__, nents, sba_sg_address(sglist), sglist->length);
+		   __func__, nents, sba_sg_address(sglist), sglist->length);
 
 #ifdef ASSERT_PDIR_SANITY
 	ioc = GET_IOC(dev);
@@ -1509,7 +1529,7 @@ void sba_unmap_sg (struct device *dev, struct scatterlist *sglist, int nents, in
 		nents--;
 	}
 
-	DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__,  nents);
+	DBG_RUN_SG("%s() DONE (nents %d)\n", __func__,  nents);
 
 #ifdef ASSERT_PDIR_SANITY
 	spin_lock_irqsave(&ioc->res_lock, flags);
@@ -1546,7 +1566,7 @@ ioc_iova_init(struct ioc *ioc)
 	ioc->iov_size = ~ioc->imask + 1;
 
 	DBG_INIT("%s() hpa %p IOV base 0x%lx mask 0x%lx (%dMB)\n",
-		__FUNCTION__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
+		__func__, ioc->ioc_hpa, ioc->ibase, ioc->imask,
 		ioc->iov_size >> 20);
 
 	switch (iovp_size) {
@@ -1569,7 +1589,7 @@ ioc_iova_init(struct ioc *ioc)
 
 	memset(ioc->pdir_base, 0, ioc->pdir_size);
 
-	DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __FUNCTION__,
+	DBG_INIT("%s() IOV page size %ldK pdir %p size %x\n", __func__,
 		iovp_size >> 10, ioc->pdir_base, ioc->pdir_size);
 
 	ASSERT(ALIGN((unsigned long) ioc->pdir_base, 4*1024) == (unsigned long) ioc->pdir_base);
@@ -1612,7 +1632,7 @@ ioc_iova_init(struct ioc *ioc)
 
 		prefetch_spill_page = virt_to_phys(addr);
 
-		DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __FUNCTION__, prefetch_spill_page);
+		DBG_INIT("%s() prefetch spill addr: 0x%lx\n", __func__, prefetch_spill_page);
 	}
 	/*
   	** Set all the PDIR entries valid w/ the spill page as the target
@@ -1641,7 +1661,7 @@ ioc_resource_init(struct ioc *ioc)
 	/* resource map size dictated by pdir_size */
 	ioc->res_size = ioc->pdir_size / PDIR_ENTRY_SIZE; /* entries */
 	ioc->res_size >>= 3;  /* convert bit count to byte count */
-	DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+	DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size);
 
 	ioc->res_map = (char *) __get_free_pages(GFP_KERNEL,
 						 get_order(ioc->res_size));
@@ -1664,7 +1684,7 @@ ioc_resource_init(struct ioc *ioc)
 							      | prefetch_spill_page);
 #endif
 
-	DBG_INIT("%s() res_map %x %p\n", __FUNCTION__,
+	DBG_INIT("%s() res_map %x %p\n", __func__,
 		 ioc->res_size, (void *) ioc->res_map);
 }
 
@@ -1767,7 +1787,7 @@ ioc_init(u64 hpa, void *handle)
 	iovp_size = (1 << iovp_shift);
 	iovp_mask = ~(iovp_size - 1);
 
-	DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __FUNCTION__,
+	DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __func__,
 		PAGE_SIZE >> 10, iovp_size >> 10);
 
 	if (!ioc->name) {
@@ -2137,7 +2157,7 @@ sba_page_override(char *str)
 			break;
 		default:
 			printk("%s: unknown/unsupported iommu page size %ld\n",
-			       __FUNCTION__, page_size);
+			       __func__, page_size);
 	}
 
 	return 1;
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index 9898febf609a..3d47839a0c48 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -222,7 +222,7 @@ simeth_probe1(void)
 	}
 
 	if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
-		panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+		panic("%s: out of interrupt vectors!\n", __func__);
 	dev->irq = rc;
 
 	/*
@@ -294,7 +294,7 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
 		return NOTIFY_DONE;
 	}
 
-	if (dev->nd_net != &init_net)
+	if (dev_net(dev) != &init_net)
 		return NOTIFY_DONE;
 
 	if ( event != NETDEV_UP && event != NETDEV_DOWN ) return NOTIFY_DONE;
diff --git a/arch/ia64/hp/sim/simscsi.c b/arch/ia64/hp/sim/simscsi.c
index 7661bb065fa5..3a078ad3aa44 100644
--- a/arch/ia64/hp/sim/simscsi.c
+++ b/arch/ia64/hp/sim/simscsi.c
@@ -201,22 +201,6 @@ simscsi_readwrite10 (struct scsi_cmnd *sc, int mode)
 	simscsi_sg_readwrite(sc, mode, offset);
 }
 
-static void simscsi_fillresult(struct scsi_cmnd *sc, char *buf, unsigned len)
-{
-
-	int i;
-	unsigned thislen;
-	struct scatterlist *slp;
-
-	scsi_for_each_sg(sc, slp, scsi_sg_count(sc), i) {
-		if (!len)
-			break;
-		thislen = min(len, slp->length);
-		memcpy(sg_virt(slp), buf, thislen);
-		len -= thislen;
-	}
-}
-
 static int
 simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 {
@@ -258,7 +242,7 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			buf[6] = 0;	/* reserved */
 			buf[7] = 0;	/* various flags */
 			memcpy(buf + 8, "HP      SIMULATED DISK  0.00",  28);
-			simscsi_fillresult(sc, buf, 36);
+			scsi_sg_copy_from_buffer(sc, buf, 36);
 			sc->result = GOOD;
 			break;
 
@@ -306,14 +290,15 @@ simscsi_queuecommand (struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
 			buf[5] = 0;
 			buf[6] = 2;
 			buf[7] = 0;
-			simscsi_fillresult(sc, buf, 8);
+			scsi_sg_copy_from_buffer(sc, buf, 8);
 			sc->result = GOOD;
 			break;
 
 		      case MODE_SENSE:
 		      case MODE_SENSE_10:
 			/* sd.c uses this to determine whether disk does write-caching. */
-			simscsi_fillresult(sc, (char *)empty_zero_page, scsi_bufflen(sc));
+			scsi_sg_copy_from_buffer(sc, (char *)empty_zero_page,
+						 PAGE_SIZE);
 			sc->result = GOOD;
 			break;
 
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index ef252df50e1e..eb0c32a85fd7 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -1000,7 +1000,7 @@ simrs_init (void)
 		if (!state->irq) {
 			if ((rc = assign_irq_vector(AUTO_ASSIGN)) < 0)
 				panic("%s: out of interrupt vectors!\n",
-				      __FUNCTION__);
+				      __func__);
 			state->irq = rc;
 			ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
 		}
diff --git a/arch/ia64/ia32/elfcore32.h b/arch/ia64/ia32/elfcore32.h
index 446c9aac924d..9a3abf58cea3 100644
--- a/arch/ia64/ia32/elfcore32.h
+++ b/arch/ia64/ia32/elfcore32.h
@@ -30,7 +30,19 @@ struct elf_siginfo
 	int	si_errno;			/* errno */
 };
 
-#define jiffies_to_timeval(a,b) do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; }while(0)
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+/*
+ * Hacks are here since types between compat_timeval (= pair of s32) and
+ * ia64-native timeval (= pair of s64) are not compatible, at least a file
+ * arch/ia64/ia32/../../../fs/binfmt_elf.c will get warnings from compiler on
+ * use of cputime_to_timeval(), which usually an alias of jiffies_to_timeval().
+ */
+#define cputime_to_timeval(a,b) \
+	do { (b)->tv_usec = 0; (b)->tv_sec = (a)/NSEC_PER_SEC; } while(0)
+#else
+#define jiffies_to_timeval(a,b) \
+	do { (b)->tv_usec = 0; (b)->tv_sec = (a)/HZ; } while(0)
+#endif
 
 struct elf_prstatus
 {
diff --git a/arch/ia64/ia32/ia32_signal.c b/arch/ia64/ia32/ia32_signal.c
index 85e82f32e480..256a7faeda07 100644
--- a/arch/ia64/ia32/ia32_signal.c
+++ b/arch/ia64/ia32/ia32_signal.c
@@ -766,8 +766,19 @@ get_sigframe (struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
-		if (!on_sig_stack(esp))
+		int onstack = sas_ss_flags(esp);
+
+		if (onstack == 0)
 			esp = current->sas_ss_sp + current->sas_ss_size;
+		else if (onstack == SS_ONSTACK) {
+			/*
+			 * If we are on the alternate signal stack and would
+			 * overflow it, don't. Return an always-bogus address
+			 * instead so we will die with SIGSEGV.
+			 */
+			if (!likely(on_sig_stack(esp - frame_size)))
+				return (void __user *) -1L;
+		}
 	}
 	/* Legacy stack switching not supported */
 
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index d025a22eb225..7e028ceb93ba 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -32,17 +32,13 @@
 #include <linux/shm.h>
 #include <linux/slab.h>
 #include <linux/uio.h>
-#include <linux/nfs_fs.h>
+#include <linux/socket.h>
 #include <linux/quota.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
 #include <linux/poll.h>
 #include <linux/eventpoll.h>
 #include <linux/personality.h>
 #include <linux/ptrace.h>
+#include <linux/regset.h>
 #include <linux/stat.h>
 #include <linux/ipc.h>
 #include <linux/capability.h>
@@ -2392,16 +2388,45 @@ get_free_idx (void)
 	return -ESRCH;
 }
 
+static void set_tls_desc(struct task_struct *p, int idx,
+		const struct ia32_user_desc *info, int n)
+{
+	struct thread_struct *t = &p->thread;
+	struct desc_struct *desc = &t->tls_array[idx - GDT_ENTRY_TLS_MIN];
+	int cpu;
+
+	/*
+	 * We must not get preempted while modifying the TLS.
+	 */
+	cpu = get_cpu();
+
+	while (n-- > 0) {
+		if (LDT_empty(info)) {
+			desc->a = 0;
+			desc->b = 0;
+		} else {
+			desc->a = LDT_entry_a(info);
+			desc->b = LDT_entry_b(info);
+		}
+
+		++info;
+		++desc;
+	}
+
+	if (t == &current->thread)
+		load_TLS(t, cpu);
+
+	put_cpu();
+}
+
 /*
  * Set a given TLS descriptor:
  */
 asmlinkage int
 sys32_set_thread_area (struct ia32_user_desc __user *u_info)
 {
-	struct thread_struct *t = &current->thread;
 	struct ia32_user_desc info;
-	struct desc_struct *desc;
-	int cpu, idx;
+	int idx;
 
 	if (copy_from_user(&info, u_info, sizeof(info)))
 		return -EFAULT;
@@ -2421,18 +2446,7 @@ sys32_set_thread_area (struct ia32_user_desc __user *u_info)
 	if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
 		return -EINVAL;
 
-	desc = t->tls_array + idx - GDT_ENTRY_TLS_MIN;
-
-	cpu = smp_processor_id();
-
-	if (LDT_empty(&info)) {
-		desc->a = 0;
-		desc->b = 0;
-	} else {
-		desc->a = LDT_entry_a(&info);
-		desc->b = LDT_entry_b(&info);
-	}
-	load_TLS(t, cpu);
+	set_tls_desc(current, idx, &info, 1);
 	return 0;
 }
 
@@ -2456,6 +2470,20 @@ sys32_set_thread_area (struct ia32_user_desc __user *u_info)
 #define GET_PRESENT(desc)	(((desc)->b >> 15) & 1)
 #define GET_USEABLE(desc)	(((desc)->b >> 20) & 1)
 
+static void fill_user_desc(struct ia32_user_desc *info, int idx,
+		const struct desc_struct *desc)
+{
+	info->entry_number = idx;
+	info->base_addr = GET_BASE(desc);
+	info->limit = GET_LIMIT(desc);
+	info->seg_32bit = GET_32BIT(desc);
+	info->contents = GET_CONTENTS(desc);
+	info->read_exec_only = !GET_WRITABLE(desc);
+	info->limit_in_pages = GET_LIMIT_PAGES(desc);
+	info->seg_not_present = !GET_PRESENT(desc);
+	info->useable = GET_USEABLE(desc);
+}
+
 asmlinkage int
 sys32_get_thread_area (struct ia32_user_desc __user *u_info)
 {
@@ -2469,22 +2497,588 @@ sys32_get_thread_area (struct ia32_user_desc __user *u_info)
 		return -EINVAL;
 
 	desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
-
-	info.entry_number = idx;
-	info.base_addr = GET_BASE(desc);
-	info.limit = GET_LIMIT(desc);
-	info.seg_32bit = GET_32BIT(desc);
-	info.contents = GET_CONTENTS(desc);
-	info.read_exec_only = !GET_WRITABLE(desc);
-	info.limit_in_pages = GET_LIMIT_PAGES(desc);
-	info.seg_not_present = !GET_PRESENT(desc);
-	info.useable = GET_USEABLE(desc);
+	fill_user_desc(&info, idx, desc);
 
 	if (copy_to_user(u_info, &info, sizeof(info)))
 		return -EFAULT;
 	return 0;
 }
 
+struct regset_get {
+	void *kbuf;
+	void __user *ubuf;
+};
+
+struct regset_set {
+	const void *kbuf;
+	const void __user *ubuf;
+};
+
+struct regset_getset {
+	struct task_struct *target;
+	const struct user_regset *regset;
+	union {
+		struct regset_get get;
+		struct regset_set set;
+	} u;
+	unsigned int pos;
+	unsigned int count;
+	int ret;
+};
+
+static void getfpreg(struct task_struct *task, int regno, int *val)
+{
+	switch (regno / sizeof(int)) {
+	case 0:
+		*val = task->thread.fcr & 0xffff;
+		break;
+	case 1:
+		*val = task->thread.fsr & 0xffff;
+		break;
+	case 2:
+		*val = (task->thread.fsr>>16) & 0xffff;
+		break;
+	case 3:
+		*val = task->thread.fir;
+		break;
+	case 4:
+		*val = (task->thread.fir>>32) & 0xffff;
+		break;
+	case 5:
+		*val = task->thread.fdr;
+		break;
+	case 6:
+		*val = (task->thread.fdr >> 32) & 0xffff;
+		break;
+	}
+}
+
+static void setfpreg(struct task_struct *task, int regno, int val)
+{
+	switch (regno / sizeof(int)) {
+	case 0:
+		task->thread.fcr = (task->thread.fcr & (~0x1f3f))
+			| (val & 0x1f3f);
+		break;
+	case 1:
+		task->thread.fsr = (task->thread.fsr & (~0xffff)) | val;
+		break;
+	case 2:
+		task->thread.fsr = (task->thread.fsr & (~0xffff0000))
+			| (val << 16);
+		break;
+	case 3:
+		task->thread.fir = (task->thread.fir & (~0xffffffff)) | val;
+		break;
+	case 5:
+		task->thread.fdr = (task->thread.fdr & (~0xffffffff)) | val;
+		break;
+	}
+}
+
+static void access_fpreg_ia32(int regno, void *reg,
+		struct pt_regs *pt, struct switch_stack *sw,
+		int tos, int write)
+{
+	void *f;
+
+	if ((regno += tos) >= 8)
+		regno -= 8;
+	if (regno < 4)
+		f = &pt->f8 + regno;
+	else if (regno <= 7)
+		f = &sw->f12 + (regno - 4);
+	else {
+		printk(KERN_ERR "regno must be less than 7 \n");
+		 return;
+	}
+
+	if (write)
+		memcpy(f, reg, sizeof(struct _fpreg_ia32));
+	else
+		memcpy(reg, f, sizeof(struct _fpreg_ia32));
+}
+
+static void do_fpregs_get(struct unw_frame_info *info, void *arg)
+{
+	struct regset_getset *dst = arg;
+	struct task_struct *task = dst->target;
+	struct pt_regs *pt;
+	int start, end, tos;
+	char buf[80];
+
+	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+		return;
+	if (dst->pos < 7 * sizeof(int)) {
+		end = min((dst->pos + dst->count),
+			(unsigned int)(7 * sizeof(int)));
+		for (start = dst->pos; start < end; start += sizeof(int))
+			getfpreg(task, start, (int *)(buf + start));
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, buf,
+				0, 7 * sizeof(int));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+	if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
+		pt = task_pt_regs(task);
+		tos = (task->thread.fsr >> 11) & 7;
+		end = min(dst->pos + dst->count,
+			(unsigned int)(sizeof(struct ia32_user_i387_struct)));
+		start = (dst->pos - 7 * sizeof(int)) /
+			sizeof(struct _fpreg_ia32);
+		end = (end - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
+		for (; start < end; start++)
+			access_fpreg_ia32(start,
+				(struct _fpreg_ia32 *)buf + start,
+				pt, info->sw, tos, 0);
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf,
+				buf, 7 * sizeof(int),
+				sizeof(struct ia32_user_i387_struct));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+}
+
+static void do_fpregs_set(struct unw_frame_info *info, void *arg)
+{
+	struct regset_getset *dst = arg;
+	struct task_struct *task = dst->target;
+	struct pt_regs *pt;
+	char buf[80];
+	int end, start, tos;
+
+	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+		return;
+
+	if (dst->pos < 7 * sizeof(int)) {
+		start = dst->pos;
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf, buf,
+				0, 7 * sizeof(int));
+		if (dst->ret)
+			return;
+		for (; start < dst->pos; start += sizeof(int))
+			setfpreg(task, start, *((int *)(buf + start)));
+		if (dst->count == 0)
+			return;
+	}
+	if (dst->pos < sizeof(struct ia32_user_i387_struct)) {
+		start = (dst->pos - 7 * sizeof(int)) /
+			sizeof(struct _fpreg_ia32);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf,
+				buf, 7 * sizeof(int),
+				sizeof(struct ia32_user_i387_struct));
+		if (dst->ret)
+			return;
+		pt = task_pt_regs(task);
+		tos = (task->thread.fsr >> 11) & 7;
+		end = (dst->pos - 7 * sizeof(int)) / sizeof(struct _fpreg_ia32);
+		for (; start < end; start++)
+			access_fpreg_ia32(start,
+				(struct _fpreg_ia32 *)buf + start,
+				pt, info->sw, tos, 1);
+		if (dst->count == 0)
+			return;
+	}
+}
+
+#define OFFSET(member) ((int)(offsetof(struct ia32_user_fxsr_struct, member)))
+static void getfpxreg(struct task_struct *task, int start, int end, char *buf)
+{
+	int min_val;
+
+	min_val = min(end, OFFSET(fop));
+	while (start < min_val) {
+		if (start == OFFSET(cwd))
+			*((short *)buf) = task->thread.fcr & 0xffff;
+		else if (start == OFFSET(swd))
+			*((short *)buf) = task->thread.fsr & 0xffff;
+		else if (start == OFFSET(twd))
+			*((short *)buf) = (task->thread.fsr>>16) & 0xffff;
+		buf += 2;
+		start += 2;
+	}
+	/* skip fop element */
+	if (start == OFFSET(fop)) {
+		start += 2;
+		buf += 2;
+	}
+	while (start < end) {
+		if (start == OFFSET(fip))
+			*((int *)buf) = task->thread.fir;
+		else if (start == OFFSET(fcs))
+			*((int *)buf) = (task->thread.fir>>32) & 0xffff;
+		else if (start == OFFSET(foo))
+			*((int *)buf) = task->thread.fdr;
+		else if (start == OFFSET(fos))
+			*((int *)buf) = (task->thread.fdr>>32) & 0xffff;
+		else if (start == OFFSET(mxcsr))
+			*((int *)buf) = ((task->thread.fcr>>32) & 0xff80)
+					 | ((task->thread.fsr>>32) & 0x3f);
+		buf += 4;
+		start += 4;
+	}
+}
+
+static void setfpxreg(struct task_struct *task, int start, int end, char *buf)
+{
+	int min_val, num32;
+	short num;
+	unsigned long num64;
+
+	min_val = min(end, OFFSET(fop));
+	while (start < min_val) {
+		num = *((short *)buf);
+		if (start == OFFSET(cwd)) {
+			task->thread.fcr = (task->thread.fcr & (~0x1f3f))
+						| (num & 0x1f3f);
+		} else if (start == OFFSET(swd)) {
+			task->thread.fsr = (task->thread.fsr & (~0xffff)) | num;
+		} else if (start == OFFSET(twd)) {
+			task->thread.fsr = (task->thread.fsr & (~0xffff0000))
+				| (((int)num) << 16);
+		}
+		buf += 2;
+		start += 2;
+	}
+	/* skip fop element */
+	if (start == OFFSET(fop)) {
+		start += 2;
+		buf += 2;
+	}
+	while (start < end) {
+		num32 = *((int *)buf);
+		if (start == OFFSET(fip))
+			task->thread.fir = (task->thread.fir & (~0xffffffff))
+						 | num32;
+		else if (start == OFFSET(foo))
+			task->thread.fdr = (task->thread.fdr & (~0xffffffff))
+						 | num32;
+		else if (start == OFFSET(mxcsr)) {
+			num64 = num32 & 0xff10;
+			task->thread.fcr = (task->thread.fcr &
+				(~0xff1000000000UL)) | (num64<<32);
+			num64 = num32 & 0x3f;
+			task->thread.fsr = (task->thread.fsr &
+				(~0x3f00000000UL)) | (num64<<32);
+		}
+		buf += 4;
+		start += 4;
+	}
+}
+
+static void do_fpxregs_get(struct unw_frame_info *info, void *arg)
+{
+	struct regset_getset *dst = arg;
+	struct task_struct *task = dst->target;
+	struct pt_regs *pt;
+	char buf[128];
+	int start, end, tos;
+
+	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+		return;
+	if (dst->pos < OFFSET(st_space[0])) {
+		end = min(dst->pos + dst->count, (unsigned int)32);
+		getfpxreg(task, dst->pos, end, buf);
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, buf,
+				0, OFFSET(st_space[0]));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+	if (dst->pos < OFFSET(xmm_space[0])) {
+		pt = task_pt_regs(task);
+		tos = (task->thread.fsr >> 11) & 7;
+		end = min(dst->pos + dst->count,
+				(unsigned int)OFFSET(xmm_space[0]));
+		start = (dst->pos - OFFSET(st_space[0])) / 16;
+		end = (end - OFFSET(st_space[0])) / 16;
+		for (; start < end; start++)
+			access_fpreg_ia32(start, buf + 16 * start, pt,
+						info->sw, tos, 0);
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf,
+				buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+	if (dst->pos < OFFSET(padding[0]))
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf,
+				&info->sw->f16, OFFSET(xmm_space[0]),
+				OFFSET(padding[0]));
+}
+
+static void do_fpxregs_set(struct unw_frame_info *info, void *arg)
+{
+	struct regset_getset *dst = arg;
+	struct task_struct *task = dst->target;
+	char buf[128];
+	int start, end;
+
+	if (dst->count == 0 || unw_unwind_to_user(info) < 0)
+		return;
+
+	if (dst->pos < OFFSET(st_space[0])) {
+		start = dst->pos;
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf,
+				buf, 0, OFFSET(st_space[0]));
+		if (dst->ret)
+			return;
+		setfpxreg(task, start, dst->pos, buf);
+		if (dst->count == 0)
+			return;
+	}
+	if (dst->pos < OFFSET(xmm_space[0])) {
+		struct pt_regs *pt;
+		int tos;
+		pt = task_pt_regs(task);
+		tos = (task->thread.fsr >> 11) & 7;
+		start = (dst->pos - OFFSET(st_space[0])) / 16;
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf,
+				buf, OFFSET(st_space[0]), OFFSET(xmm_space[0]));
+		if (dst->ret)
+			return;
+		end = (dst->pos - OFFSET(st_space[0])) / 16;
+		for (; start < end; start++)
+			access_fpreg_ia32(start, buf + 16 * start, pt, info->sw,
+						 tos, 1);
+		if (dst->count == 0)
+			return;
+	}
+	if (dst->pos < OFFSET(padding[0]))
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf,
+				&info->sw->f16, OFFSET(xmm_space[0]),
+				 OFFSET(padding[0]));
+}
+#undef OFFSET
+
+static int do_regset_call(void (*call)(struct unw_frame_info *, void *),
+		struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	struct regset_getset info = { .target = target, .regset = regset,
+		.pos = pos, .count = count,
+		.u.set = { .kbuf = kbuf, .ubuf = ubuf },
+		.ret = 0 };
+
+	if (target == current)
+		unw_init_running(call, &info);
+	else {
+		struct unw_frame_info ufi;
+		memset(&ufi, 0, sizeof(ufi));
+		unw_init_from_blocked_task(&ufi, target);
+		(*call)(&ufi, &info);
+	}
+
+	return info.ret;
+}
+
+static int ia32_fpregs_get(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		void *kbuf, void __user *ubuf)
+{
+	return do_regset_call(do_fpregs_get, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int ia32_fpregs_set(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	return do_regset_call(do_fpregs_set, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int ia32_fpxregs_get(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		void *kbuf, void __user *ubuf)
+{
+	return do_regset_call(do_fpxregs_get, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int ia32_fpxregs_set(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	return do_regset_call(do_fpxregs_set, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int ia32_genregs_get(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		void *kbuf, void __user *ubuf)
+{
+	if (kbuf) {
+		u32 *kp = kbuf;
+		while (count > 0) {
+			*kp++ = getreg(target, pos);
+			pos += 4;
+			count -= 4;
+		}
+	} else {
+		u32 __user *up = ubuf;
+		while (count > 0) {
+			if (__put_user(getreg(target, pos), up++))
+				return -EFAULT;
+			pos += 4;
+			count -= 4;
+		}
+	}
+	return 0;
+}
+
+static int ia32_genregs_set(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	int ret = 0;
+
+	if (kbuf) {
+		const u32 *kp = kbuf;
+		while (!ret && count > 0) {
+			putreg(target, pos, *kp++);
+			pos += 4;
+			count -= 4;
+		}
+	} else {
+		const u32 __user *up = ubuf;
+		u32 val;
+		while (!ret && count > 0) {
+			ret = __get_user(val, up++);
+			if (!ret)
+				putreg(target, pos, val);
+			pos += 4;
+			count -= 4;
+		}
+	}
+	return ret;
+}
+
+static int ia32_tls_active(struct task_struct *target,
+		const struct user_regset *regset)
+{
+	struct thread_struct *t = &target->thread;
+	int n = GDT_ENTRY_TLS_ENTRIES;
+	while (n > 0 && desc_empty(&t->tls_array[n -1]))
+		--n;
+	return n;
+}
+
+static int ia32_tls_get(struct task_struct *target,
+		const struct user_regset *regset, unsigned int pos,
+		unsigned int count, void *kbuf, void __user *ubuf)
+{
+	const struct desc_struct *tls;
+
+	if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
+			(pos % sizeof(struct ia32_user_desc)) != 0 ||
+			(count % sizeof(struct ia32_user_desc)) != 0)
+		return -EINVAL;
+
+	pos /= sizeof(struct ia32_user_desc);
+	count /= sizeof(struct ia32_user_desc);
+
+	tls = &target->thread.tls_array[pos];
+
+	if (kbuf) {
+		struct ia32_user_desc *info = kbuf;
+		while (count-- > 0)
+			fill_user_desc(info++, GDT_ENTRY_TLS_MIN + pos++,
+					tls++);
+	} else {
+		struct ia32_user_desc __user *u_info = ubuf;
+		while (count-- > 0) {
+			struct ia32_user_desc info;
+			fill_user_desc(&info, GDT_ENTRY_TLS_MIN + pos++, tls++);
+			if (__copy_to_user(u_info++, &info, sizeof(info)))
+				return -EFAULT;
+		}
+	}
+
+	return 0;
+}
+
+static int ia32_tls_set(struct task_struct *target,
+		const struct user_regset *regset, unsigned int pos,
+		unsigned int count, const void *kbuf, const void __user *ubuf)
+{
+	struct ia32_user_desc infobuf[GDT_ENTRY_TLS_ENTRIES];
+	const struct ia32_user_desc *info;
+
+	if (pos > GDT_ENTRY_TLS_ENTRIES * sizeof(struct ia32_user_desc) ||
+			(pos % sizeof(struct ia32_user_desc)) != 0 ||
+			(count % sizeof(struct ia32_user_desc)) != 0)
+		return -EINVAL;
+
+	if (kbuf)
+		info = kbuf;
+	else if (__copy_from_user(infobuf, ubuf, count))
+		return -EFAULT;
+	else
+		info = infobuf;
+
+	set_tls_desc(target,
+		GDT_ENTRY_TLS_MIN + (pos / sizeof(struct ia32_user_desc)),
+		info, count / sizeof(struct ia32_user_desc));
+
+	return 0;
+}
+
+/*
+ * This should match arch/i386/kernel/ptrace.c:native_regsets.
+ * XXX ioperm? vm86?
+ */
+static const struct user_regset ia32_regsets[] = {
+	{
+		.core_note_type = NT_PRSTATUS,
+		.n = sizeof(struct user_regs_struct32)/4,
+		.size = 4, .align = 4,
+		.get = ia32_genregs_get, .set = ia32_genregs_set
+	},
+	{
+		.core_note_type = NT_PRFPREG,
+		.n = sizeof(struct ia32_user_i387_struct) / 4,
+		.size = 4, .align = 4,
+		.get = ia32_fpregs_get, .set = ia32_fpregs_set
+	},
+	{
+		.core_note_type = NT_PRXFPREG,
+		.n = sizeof(struct ia32_user_fxsr_struct) / 4,
+		.size = 4, .align = 4,
+		.get = ia32_fpxregs_get, .set = ia32_fpxregs_set
+	},
+	{
+		.core_note_type = NT_386_TLS,
+		.n = GDT_ENTRY_TLS_ENTRIES,
+		.bias = GDT_ENTRY_TLS_MIN,
+		.size = sizeof(struct ia32_user_desc),
+		.align = sizeof(struct ia32_user_desc),
+		.active = ia32_tls_active,
+		.get = ia32_tls_get, .set = ia32_tls_set,
+	},
+};
+
+const struct user_regset_view user_ia32_view = {
+	.name = "i386", .e_machine = EM_386,
+	.regsets = ia32_regsets, .n = ARRAY_SIZE(ia32_regsets)
+};
+
 long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high, 
 			__u32 len_low, __u32 len_high, int advice)
 { 
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 33e5a598672d..13fd10e8699e 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -6,7 +6,7 @@ extra-y	:= head.o init_task.o vmlinux.lds
 
 obj-y := acpi.o entry.o efi.o efi_stub.o gate-data.o fsys.o ia64_ksyms.o irq.o irq_ia64.o	\
 	 irq_lsapic.o ivt.o machvec.o pal.o patch.o process.o perfmon.o ptrace.o sal.o		\
-	 salinfo.o semaphore.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
+	 salinfo.o setup.o signal.o sys_ia64.o time.o traps.o unaligned.o \
 	 unwind.o mca.o mca_asm.o topology.o
 
 obj-$(CONFIG_IA64_BRL_EMU)	+= brl_emu.o
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 78f28d825f30..c7467f863c7a 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -423,6 +423,7 @@ static u32 __devinitdata pxm_flag[PXM_FLAG_LEN];
 #define pxm_bit_set(bit)	(set_bit(bit,(void *)pxm_flag))
 #define pxm_bit_test(bit)	(test_bit(bit,(void *)pxm_flag))
 static struct acpi_table_slit __initdata *slit_table;
+cpumask_t early_cpu_possible_map = CPU_MASK_NONE;
 
 static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
 {
@@ -482,6 +483,7 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	    (pa->apic_id << 8) | (pa->local_sapic_eid);
 	/* nid should be overridden as logical node id later */
 	node_cpuid[srat_num_cpus].nid = pxm;
+	cpu_set(srat_num_cpus, early_cpu_possible_map);
 	srat_num_cpus++;
 }
 
@@ -559,7 +561,7 @@ void __init acpi_numa_arch_fixup(void)
 	}
 
 	/* set logical node id in cpu structure */
-	for (i = 0; i < srat_num_cpus; i++)
+	for_each_possible_early_cpu(i)
 		node_cpuid[i].nid = pxm_to_node(node_cpuid[i].nid);
 
 	printk(KERN_INFO "Number of logical nodes in system = %d\n",
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index 0aebc6f79e95..230a6f92367f 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -7,6 +7,7 @@
 #define ASM_OFFSETS_C 1
 
 #include <linux/sched.h>
+#include <linux/pid.h>
 #include <linux/clocksource.h>
 
 #include <asm-ia64/processor.h>
@@ -34,17 +35,29 @@ void foo(void)
 	DEFINE(SIGFRAME_SIZE, sizeof (struct sigframe));
 	DEFINE(UNW_FRAME_INFO_SIZE, sizeof (struct unw_frame_info));
 
+	BUILD_BUG_ON(sizeof(struct upid) != 32);
+	DEFINE(IA64_UPID_SHIFT, 5);
+
 	BLANK();
 
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
 	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	DEFINE(TI_AC_STAMP, offsetof(struct thread_info, ac_stamp));
+	DEFINE(TI_AC_LEAVE, offsetof(struct thread_info, ac_leave));
+	DEFINE(TI_AC_STIME, offsetof(struct thread_info, ac_stime));
+	DEFINE(TI_AC_UTIME, offsetof(struct thread_info, ac_utime));
+#endif
 
 	BLANK();
 
 	DEFINE(IA64_TASK_BLOCKED_OFFSET,offsetof (struct task_struct, blocked));
 	DEFINE(IA64_TASK_CLEAR_CHILD_TID_OFFSET,offsetof (struct task_struct, clear_child_tid));
 	DEFINE(IA64_TASK_GROUP_LEADER_OFFSET, offsetof (struct task_struct, group_leader));
+	DEFINE(IA64_TASK_TGIDLINK_OFFSET, offsetof (struct task_struct, pids[PIDTYPE_PID].pid));
+	DEFINE(IA64_PID_LEVEL_OFFSET, offsetof (struct pid, level));
+	DEFINE(IA64_PID_UPID_OFFSET, offsetof (struct pid, numbers[0]));
 	DEFINE(IA64_TASK_PENDING_OFFSET,offsetof (struct task_struct, pending));
 	DEFINE(IA64_TASK_PID_OFFSET, offsetof (struct task_struct, pid));
 	DEFINE(IA64_TASK_REAL_PARENT_OFFSET, offsetof (struct task_struct, real_parent));
diff --git a/arch/ia64/kernel/crash.c b/arch/ia64/kernel/crash.c
index f1cf2df97a2d..90ef338cf46f 100644
--- a/arch/ia64/kernel/crash.c
+++ b/arch/ia64/kernel/crash.c
@@ -24,6 +24,7 @@ int kdump_status[NR_CPUS];
 static atomic_t kdump_cpu_frozen;
 atomic_t kdump_in_progress;
 static int kdump_on_init = 1;
+static int kdump_on_fatal_mca = 1;
 
 static inline Elf64_Word
 *append_elf_note(Elf64_Word *buf, char *name, unsigned type, void *data,
@@ -118,6 +119,7 @@ machine_crash_shutdown(struct pt_regs *pt)
 static void
 machine_kdump_on_init(void)
 {
+	crash_save_vmcoreinfo();
 	local_irq_disable();
 	kexec_disable_iosapic();
 	machine_kexec(ia64_kimage);
@@ -148,14 +150,14 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 	struct ia64_mca_notify_die *nd;
 	struct die_args *args = data;
 
-	if (!kdump_on_init)
+	if (!kdump_on_init && !kdump_on_fatal_mca)
 		return NOTIFY_DONE;
 
 	if (!ia64_kimage) {
 		if (val == DIE_INIT_MONARCH_LEAVE)
 			ia64_mca_printk(KERN_NOTICE
 					"%s: kdump not configured\n",
-					__FUNCTION__);
+					__func__);
 		return NOTIFY_DONE;
 	}
 
@@ -173,32 +175,38 @@ kdump_init_notifier(struct notifier_block *self, unsigned long val, void *data)
 		return NOTIFY_DONE;
 
 	switch (val) {
-		case DIE_INIT_MONARCH_PROCESS:
+	case DIE_INIT_MONARCH_PROCESS:
+		if (kdump_on_init) {
 			atomic_set(&kdump_in_progress, 1);
 			*(nd->monarch_cpu) = -1;
-			break;
-		case DIE_INIT_MONARCH_LEAVE:
+		}
+		break;
+	case DIE_INIT_MONARCH_LEAVE:
+		if (kdump_on_init)
 			machine_kdump_on_init();
-			break;
-		case DIE_INIT_SLAVE_LEAVE:
-			if (atomic_read(&kdump_in_progress))
-				unw_init_running(kdump_cpu_freeze, NULL);
-			break;
-		case DIE_MCA_RENDZVOUS_LEAVE:
-			if (atomic_read(&kdump_in_progress))
-				unw_init_running(kdump_cpu_freeze, NULL);
-			break;
-		case DIE_MCA_MONARCH_LEAVE:
-		     /* die_register->signr indicate if MCA is recoverable */
-			if (!args->signr)
-				machine_kdump_on_init();
-			break;
+		break;
+	case DIE_INIT_SLAVE_LEAVE:
+		if (atomic_read(&kdump_in_progress))
+			unw_init_running(kdump_cpu_freeze, NULL);
+		break;
+	case DIE_MCA_RENDZVOUS_LEAVE:
+		if (atomic_read(&kdump_in_progress))
+			unw_init_running(kdump_cpu_freeze, NULL);
+		break;
+	case DIE_MCA_MONARCH_LEAVE:
+		/* die_register->signr indicate if MCA is recoverable */
+		if (kdump_on_fatal_mca && !args->signr) {
+			atomic_set(&kdump_in_progress, 1);
+			*(nd->monarch_cpu) = -1;
+			machine_kdump_on_init();
+		}
+		break;
 	}
 	return NOTIFY_DONE;
 }
 
 #ifdef CONFIG_SYSCTL
-static ctl_table kdump_on_init_table[] = {
+static ctl_table kdump_ctl_table[] = {
 	{
 		.ctl_name = CTL_UNNUMBERED,
 		.procname = "kdump_on_init",
@@ -207,6 +215,14 @@ static ctl_table kdump_on_init_table[] = {
 		.mode = 0644,
 		.proc_handler = &proc_dointvec,
 	},
+	{
+		.ctl_name = CTL_UNNUMBERED,
+		.procname = "kdump_on_fatal_mca",
+		.data = &kdump_on_fatal_mca,
+		.maxlen = sizeof(int),
+		.mode = 0644,
+		.proc_handler = &proc_dointvec,
+	},
 	{ .ctl_name = 0 }
 };
 
@@ -215,7 +231,7 @@ static ctl_table sys_table[] = {
 	  .ctl_name = CTL_KERN,
 	  .procname = "kernel",
 	  .mode = 0555,
-	  .child = kdump_on_init_table,
+	  .child = kdump_ctl_table,
 	},
 	{ .ctl_name = 0 }
 };
diff --git a/arch/ia64/kernel/efi.c b/arch/ia64/kernel/efi.c
index 919070a9aed7..d45f215bc8fc 100644
--- a/arch/ia64/kernel/efi.c
+++ b/arch/ia64/kernel/efi.c
@@ -37,6 +37,7 @@
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/mca.h>
+#include <asm/tlbflush.h>
 
 #define EFI_DEBUG	0
 
@@ -379,8 +380,8 @@ efi_get_pal_addr (void)
 		 * a dedicated ITR for the PAL code.
 		 */
 		if ((vaddr & mask) == (KERNEL_START & mask)) {
-			printk(KERN_INFO "%s: no need to install ITR for "
-			       "PAL code\n", __FUNCTION__);
+			printk(KERN_INFO "%s: no need to install ITR for PAL code\n",
+			       __func__);
 			continue;
 		}
 
@@ -399,10 +400,45 @@ efi_get_pal_addr (void)
 		return __va(md->phys_addr);
 	}
 	printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n",
-	       __FUNCTION__);
+	       __func__);
 	return NULL;
 }
 
+
+static u8 __init palo_checksum(u8 *buffer, u32 length)
+{
+	u8 sum = 0;
+	u8 *end = buffer + length;
+
+	while (buffer < end)
+		sum = (u8) (sum + *(buffer++));
+
+	return sum;
+}
+
+/*
+ * Parse and handle PALO table which is published at:
+ * http://www.dig64.org/home/DIG64_PALO_R1_0.pdf
+ */
+static void __init handle_palo(unsigned long palo_phys)
+{
+	struct palo_table *palo = __va(palo_phys);
+	u8  checksum;
+
+	if (strncmp(palo->signature, PALO_SIG, sizeof(PALO_SIG) - 1)) {
+		printk(KERN_INFO "PALO signature incorrect.\n");
+		return;
+	}
+
+	checksum = palo_checksum((u8 *)palo, palo->length);
+	if (checksum) {
+		printk(KERN_INFO "PALO checksum incorrect.\n");
+		return;
+	}
+
+	setup_ptcg_sem(palo->max_tlb_purges, NPTCG_FROM_PALO);
+}
+
 void
 efi_map_pal_code (void)
 {
@@ -432,6 +468,7 @@ efi_init (void)
 	u64 efi_desc_size;
 	char *cp, vendor[100] = "unknown";
 	int i;
+	unsigned long palo_phys;
 
 	/*
 	 * It's too early to be able to use the standard kernel command line
@@ -496,6 +533,8 @@ efi_init (void)
 	efi.hcdp       = EFI_INVALID_TABLE_ADDR;
 	efi.uga        = EFI_INVALID_TABLE_ADDR;
 
+	palo_phys      = EFI_INVALID_TABLE_ADDR;
+
 	for (i = 0; i < (int) efi.systab->nr_tables; i++) {
 		if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
 			efi.mps = config_tables[i].table;
@@ -515,10 +554,17 @@ efi_init (void)
 		} else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
 			efi.hcdp = config_tables[i].table;
 			printk(" HCDP=0x%lx", config_tables[i].table);
+		} else if (efi_guidcmp(config_tables[i].guid,
+			 PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID) == 0) {
+			palo_phys = config_tables[i].table;
+			printk(" PALO=0x%lx", config_tables[i].table);
 		}
 	}
 	printk("\n");
 
+	if (palo_phys != EFI_INVALID_TABLE_ADDR)
+		handle_palo(palo_phys);
+
 	runtime = __va(efi.systab->runtime);
 	efi.get_time = phys_get_time;
 	efi.set_time = phys_set_time;
@@ -543,12 +589,30 @@ efi_init (void)
 		for (i = 0, p = efi_map_start; p < efi_map_end;
 		     ++i, p += efi_desc_size)
 		{
+			const char *unit;
+			unsigned long size;
+
 			md = p;
-			printk("mem%02u: type=%u, attr=0x%lx, "
-			       "range=[0x%016lx-0x%016lx) (%luMB)\n",
+			size = md->num_pages << EFI_PAGE_SHIFT;
+
+			if ((size >> 40) > 0) {
+				size >>= 40;
+				unit = "TB";
+			} else if ((size >> 30) > 0) {
+				size >>= 30;
+				unit = "GB";
+			} else if ((size >> 20) > 0) {
+				size >>= 20;
+				unit = "MB";
+			} else {
+				size >>= 10;
+				unit = "KB";
+			}
+
+			printk("mem%02d: type=%2u, attr=0x%016lx, "
+			       "range=[0x%016lx-0x%016lx) (%4lu%s)\n",
 			       i, md->type, md->attribute, md->phys_addr,
-			       md->phys_addr + efi_md_size(md),
-			       md->num_pages >> (20 - EFI_PAGE_SHIFT));
+			       md->phys_addr + efi_md_size(md), size, unit);
 		}
 	}
 #endif
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index 3c331c464b40..b0be4a280174 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -710,6 +710,16 @@ ENTRY(ia64_leave_syscall)
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
 .work_processed_syscall:
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	adds r2=PT(LOADRS)+16,r12
+(pUStk)	mov.m r22=ar.itc			// fetch time at leave
+	adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
+	;;
+(p6)	ld4 r31=[r18]				// load current_thread_info()->flags
+	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
+	adds r3=PT(AR_BSPSTORE)+16,r12		// deferred
+	;;
+#else
 	adds r2=PT(LOADRS)+16,r12
 	adds r3=PT(AR_BSPSTORE)+16,r12
 	adds r18=TI_FLAGS+IA64_TASK_SIZE,r13
@@ -718,6 +728,7 @@ ENTRY(ia64_leave_syscall)
 	ld8 r19=[r2],PT(B6)-PT(LOADRS)		// load ar.rsc value for "loadrs"
 	nop.i 0
 	;;
+#endif
 	mov r16=ar.bsp				// M2  get existing backing store pointer
 	ld8 r18=[r2],PT(R9)-PT(B6)		// load b6
 (p6)	and r15=TIF_WORK_MASK,r31		// any work other than TIF_SYSCALL_TRACE?
@@ -737,12 +748,21 @@ ENTRY(ia64_leave_syscall)
 
 	ld8 r29=[r2],16		// M0|1 load cr.ipsr
 	ld8 r28=[r3],16		// M0|1 load cr.iip
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk) add r14=TI_AC_LEAVE+IA64_TASK_SIZE,r13
+	;;
+	ld8 r30=[r2],16		// M0|1 load cr.ifs
+	ld8 r25=[r3],16		// M0|1 load ar.unat
+(pUStk) add r15=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
+	;;
+#else
 	mov r22=r0		// A    clear r22
 	;;
 	ld8 r30=[r2],16		// M0|1 load cr.ifs
 	ld8 r25=[r3],16		// M0|1 load ar.unat
 (pUStk) add r14=IA64_TASK_THREAD_ON_USTACK_OFFSET,r13
 	;;
+#endif
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
 (pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
 	nop 0
@@ -759,7 +779,11 @@ ENTRY(ia64_leave_syscall)
 	ld8.fill r1=[r3],16			// M0|1 load r1
 (pUStk) mov r17=1				// A
 	;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk) st1 [r15]=r17				// M2|3
+#else
 (pUStk) st1 [r14]=r17				// M2|3
+#endif
 	ld8.fill r13=[r3],16			// M0|1
 	mov f8=f0				// F    clear f8
 	;;
@@ -775,12 +799,22 @@ ENTRY(ia64_leave_syscall)
 	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
 	cover				// B    add current frame into dirty partition & set cr.ifs
 	;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	mov r19=ar.bsp			// M2   get new backing store pointer
+	st8 [r14]=r22			// M	save time at leave
+	mov f10=f0			// F    clear f10
+
+	mov r22=r0			// A	clear r22
+	movl r14=__kernel_syscall_via_epc // X
+	;;
+#else
 	mov r19=ar.bsp			// M2   get new backing store pointer
 	mov f10=f0			// F    clear f10
 
 	nop.m 0
 	movl r14=__kernel_syscall_via_epc // X
 	;;
+#endif
 	mov.m ar.csd=r0			// M2   clear ar.csd
 	mov.m ar.ccv=r0			// M2   clear ar.ccv
 	mov b7=r14			// I0   clear b7 (hint with __kernel_syscall_via_epc)
@@ -913,10 +947,18 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	adds r16=PT(CR_IPSR)+16,r12
 	adds r17=PT(CR_IIP)+16,r12
 
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	.pred.rel.mutex pUStk,pKStk
+(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+(pUStk)	mov.m r22=ar.itc	// M  fetch time at leave
+	nop.i 0
+	;;
+#else
 (pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
 	nop.i 0
 	nop.i 0
 	;;
+#endif
 	ld8 r29=[r16],16	// load cr.ipsr
 	ld8 r28=[r17],16	// load cr.iip
 	;;
@@ -938,15 +980,37 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	;;
 	ld8.fill r12=[r16],16
 	ld8.fill r13=[r17],16
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk)	adds r3=TI_AC_LEAVE+IA64_TASK_SIZE,r18
+#else
 (pUStk)	adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18
+#endif
 	;;
 	ld8 r20=[r16],16	// ar.fpsr
 	ld8.fill r15=[r17],16
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+(pUStk)	adds r18=IA64_TASK_THREAD_ON_USTACK_OFFSET,r18	// deferred
+#endif
 	;;
 	ld8.fill r14=[r16],16
 	ld8.fill r2=[r17]
 (pUStk)	mov r17=1
 	;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	//  mmi_ :  ld8 st1 shr;;         mmi_ : st8 st1 shr;;
+	//  mib  :  mov add br        ->  mib  : ld8 add br
+	//  bbb_ :  br  nop cover;;       mbb_ : mov br  cover;;
+	//
+	//  no one require bsp in r16 if (pKStk) branch is selected.
+(pUStk)	st8 [r3]=r22		// save time at leave
+(pUStk)	st1 [r18]=r17		// restore current->thread.on_ustack
+	shr.u r18=r19,16	// get byte size of existing "dirty" partition
+	;;
+	ld8.fill r3=[r16]	// deferred
+	LOAD_PHYS_STACK_REG_SIZE(r17)
+(pKStk)	br.cond.dpnt skip_rbs_switch
+	mov r16=ar.bsp		// get existing backing store pointer
+#else
 	ld8.fill r3=[r16]
 (pUStk)	st1 [r18]=r17		// restore current->thread.on_ustack
 	shr.u r18=r19,16	// get byte size of existing "dirty" partition
@@ -954,6 +1018,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov r16=ar.bsp		// get existing backing store pointer
 	LOAD_PHYS_STACK_REG_SIZE(r17)
 (pKStk)	br.cond.dpnt skip_rbs_switch
+#endif
 
 	/*
 	 * Restore user backing store.
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 44841971f077..c1625c7e1779 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -61,13 +61,29 @@ ENTRY(fsys_getpid)
 	.prologue
 	.altrp b6
 	.body
+	add r17=IA64_TASK_GROUP_LEADER_OFFSET,r16
+	;;
+	ld8 r17=[r17]				// r17 = current->group_leader
 	add r9=TI_FLAGS+IA64_TASK_SIZE,r16
 	;;
 	ld4 r9=[r9]
-	add r8=IA64_TASK_TGID_OFFSET,r16
+	add r17=IA64_TASK_TGIDLINK_OFFSET,r17
 	;;
 	and r9=TIF_ALLWORK_MASK,r9
-	ld4 r8=[r8]				// r8 = current->tgid
+	ld8 r17=[r17]				// r17 = current->group_leader->pids[PIDTYPE_PID].pid
+	;;
+	add r8=IA64_PID_LEVEL_OFFSET,r17
+	;;
+	ld4 r8=[r8]				// r8 = pid->level
+	add r17=IA64_PID_UPID_OFFSET,r17	// r17 = &pid->numbers[0]
+	;;
+	shl r8=r8,IA64_UPID_SHIFT
+	;;
+	add r17=r17,r8				// r17 = &pid->numbers[pid->level]
+	;;
+	ld4 r8=[r17]				// r8 = pid->numbers[pid->level].nr
+	;;
+	mov r17=0
 	;;
 	cmp.ne p8,p0=0,r9
 (p8)	br.spnt.many fsys_fallback_syscall
@@ -126,15 +142,25 @@ ENTRY(fsys_set_tid_address)
 	.altrp b6
 	.body
 	add r9=TI_FLAGS+IA64_TASK_SIZE,r16
+	add r17=IA64_TASK_TGIDLINK_OFFSET,r16
 	;;
 	ld4 r9=[r9]
 	tnat.z p6,p7=r32		// check argument register for being NaT
+	ld8 r17=[r17]				// r17 = current->pids[PIDTYPE_PID].pid
 	;;
 	and r9=TIF_ALLWORK_MASK,r9
-	add r8=IA64_TASK_PID_OFFSET,r16
+	add r8=IA64_PID_LEVEL_OFFSET,r17
 	add r18=IA64_TASK_CLEAR_CHILD_TID_OFFSET,r16
 	;;
-	ld4 r8=[r8]
+	ld4 r8=[r8]				// r8 = pid->level
+	add r17=IA64_PID_UPID_OFFSET,r17	// r17 = &pid->numbers[0]
+	;;
+	shl r8=r8,IA64_UPID_SHIFT
+	;;
+	add r17=r17,r8				// r17 = &pid->numbers[pid->level]
+	;;
+	ld4 r8=[r17]				// r8 = pid->numbers[pid->level].nr
+	;;
 	cmp.ne p8,p0=0,r9
 	mov r17=-1
 	;;
@@ -210,27 +236,25 @@ ENTRY(fsys_gettimeofday)
 	// Note that instructions are optimized for McKinley. McKinley can
 	// process two bundles simultaneously and therefore we continuously
 	// try to feed the CPU two bundles and then a stop.
-	//
-	// Additional note that code has changed a lot. Optimization is TBD.
-	// Comments begin with "?" are maybe outdated.
-	tnat.nz p6,p0 = r31	// ? branch deferred to fit later bundle
-	mov pr = r30,0xc000	// Set predicates according to function
+
 	add r2 = TI_FLAGS+IA64_TASK_SIZE,r16
+	tnat.nz p6,p0 = r31		// guard against Nat argument
+(p6)	br.cond.spnt.few .fail_einval
 	movl r20 = fsyscall_gtod_data // load fsyscall gettimeofday data address
 	;;
+	ld4 r2 = [r2]			// process work pending flags
 	movl r29 = itc_jitter_data	// itc_jitter
 	add r22 = IA64_GTOD_WALL_TIME_OFFSET,r20	// wall_time
-	ld4 r2 = [r2]		// process work pending flags
-	;;
-(p15)	add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20	// monotonic_time
 	add r21 = IA64_CLKSRC_MMIO_OFFSET,r20
-	add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29
+	mov pr = r30,0xc000	// Set predicates according to function
+	;;
 	and r2 = TIF_ALLWORK_MASK,r2
-(p6)    br.cond.spnt.few .fail_einval	// ? deferred branch
+	add r19 = IA64_ITC_LASTCYCLE_OFFSET,r29
+(p15)	add r22 = IA64_GTOD_MONO_TIME_OFFSET,r20	// monotonic_time
 	;;
-	add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20 // clksrc_cycle_last
+	add r26 = IA64_CLKSRC_CYCLE_LAST_OFFSET,r20	// clksrc_cycle_last
 	cmp.ne p6, p0 = 0, r2	// Fallback if work is scheduled
-(p6)    br.cond.spnt.many fsys_fallback_syscall
+(p6)	br.cond.spnt.many fsys_fallback_syscall
 	;;
 	// Begin critical section
 .time_redo:
@@ -258,7 +282,6 @@ ENTRY(fsys_gettimeofday)
 (p8)	mov r2 = ar.itc		// CPU_TIMER. 36 clocks latency!!!
 (p9)	ld8 r2 = [r30]		// MMIO_TIMER. Could also have latency issues..
 (p13)	ld8 r25 = [r19]		// get itc_lastcycle value
-	;;		// ? could be removed by moving the last add upward
 	ld8 r9 = [r22],IA64_TIMESPEC_TV_NSEC_OFFSET	// tv_sec
 	;;
 	ld8 r8 = [r22],-IA64_TIMESPEC_TV_NSEC_OFFSET	// tv_nsec
@@ -285,13 +308,12 @@ ENTRY(fsys_gettimeofday)
 EX(.fail_efault, probe.w.fault r31, 3)
 	xmpy.l f8 = f8,f7	// nsec_per_cyc*(counter-last_counter)
 	;;
-	// ? simulate tbit.nz.or p7,p0 = r28,0
 	getf.sig r2 = f8
 	mf
 	;;
 	ld4 r10 = [r20]		// gtod_lock.sequence
 	shr.u r2 = r2,r23	// shift by factor
-	;;		// ? overloaded 3 bundles!
+	;;
 	add r8 = r8,r2		// Add xtime.nsecs
 	cmp4.ne p7,p0 = r28,r10
 (p7)	br.cond.dpnt.few .time_redo	// sequence number changed, redo
@@ -319,9 +341,9 @@ EX(.fail_efault, probe.w.fault r31, 3)
 EX(.fail_efault, probe.w.fault r23, 3)	// This also costs 5 cycles
 (p14)	xmpy.hu f8 = f8, f7		// xmpy has 5 cycles latency so use it
 	;;
-	mov r8 = r0
 (p14)	getf.sig r2 = f8
 	;;
+	mov r8 = r0
 (p14)	shr.u r21 = r2, 4
 	;;
 EX(.fail_efault, st8 [r31] = r9)
@@ -660,7 +682,11 @@ GLOBAL_ENTRY(fsys_bubble_down)
 	nop.i 0
 	;;
 	mov ar.rsc=0				// M2   set enforced lazy mode, pl 0, LE, loadrs=0
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	mov.m r30=ar.itc			// M    get cycle for accounting
+#else
 	nop.m 0
+#endif
 	nop.i 0
 	;;
 	mov r23=ar.bspstore			// M2 (12 cyc) save ar.bspstore
@@ -682,6 +708,28 @@ GLOBAL_ENTRY(fsys_bubble_down)
 	cmp.ne pKStk,pUStk=r0,r0		// A    set pKStk <- 0, pUStk <- 1
 	br.call.sptk.many b7=ia64_syscall_setup	// B
 	;;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	// mov.m r30=ar.itc is called in advance
+	add r16=TI_AC_STAMP+IA64_TASK_SIZE,r2
+	add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r2
+	;;
+	ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP	// time at last check in kernel
+	ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE	// time at leave kernel
+	;;
+	ld8 r20=[r16],TI_AC_STAMP-TI_AC_STIME	// cumulated stime
+	ld8 r21=[r17]				// cumulated utime
+	sub r22=r19,r18				// stime before leave kernel
+	;;
+	st8 [r16]=r30,TI_AC_STIME-TI_AC_STAMP	// update stamp
+	sub r18=r30,r19				// elapsed time in user mode
+	;;
+	add r20=r20,r22				// sum stime
+	add r21=r21,r18				// sum utime
+	;;
+	st8 [r16]=r20				// update stime
+	st8 [r17]=r21				// update utime
+	;;
+#endif
 	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
 	mov rp=r14				// I0   set the real return addr
 	and r3=_TIF_SYSCALL_TRACEAUDIT,r3	// A
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index d3a41d5f8d12..ddeab4e36fd5 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1002,6 +1002,26 @@ GLOBAL_ENTRY(sched_clock)
 	br.ret.sptk.many rp
 END(sched_clock)
 
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+GLOBAL_ENTRY(cycle_to_cputime)
+	alloc r16=ar.pfs,1,0,0,0
+	addl r8=THIS_CPU(cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0
+	;;
+	ldf8 f8=[r8]
+	;;
+	setf.sig f9=r32
+	;;
+	xmpy.lu f10=f9,f8	// calculate low 64 bits of 128-bit product	(4 cyc)
+	xmpy.hu f11=f9,f8	// calculate high 64 bits of 128-bit product
+	;;
+	getf.sig r8=f10		//						(5 cyc)
+	getf.sig r9=f11
+	;;
+	shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT
+	br.ret.sptk.many rp
+END(cycle_to_cputime)
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+
 GLOBAL_ENTRY(start_kernel_thread)
 	.prologue
 	.save rp, r0				// this is the end of the call-chain
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 8e7193d55528..6da1f20d7372 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -19,12 +19,6 @@ EXPORT_SYMBOL_GPL(empty_zero_page);
 EXPORT_SYMBOL(ip_fast_csum);		/* hand-coded assembly */
 EXPORT_SYMBOL(csum_ipv6_magic);
 
-#include <asm/semaphore.h>
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__up);
-
 #include <asm/page.h>
 EXPORT_SYMBOL(clear_page);
 
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 398e2fd1cd25..082c31dcfd99 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -345,7 +345,7 @@ iosapic_set_affinity (unsigned int irq, cpumask_t mask)
 	if (cpus_empty(mask))
 		return;
 
-	if (reassign_irq_vector(irq, first_cpu(mask)))
+	if (irq_prepare_move(irq, first_cpu(mask)))
 		return;
 
 	dest = cpu_physical_id(first_cpu(mask));
@@ -397,6 +397,7 @@ iosapic_end_level_irq (unsigned int irq)
 	struct iosapic_rte_info *rte;
 	int do_unmask_irq = 0;
 
+	irq_complete_move(irq);
 	if (unlikely(irq_desc[irq].status & IRQ_MOVE_PENDING)) {
 		do_unmask_irq = 1;
 		mask_irq(irq);
@@ -450,6 +451,7 @@ iosapic_ack_edge_irq (unsigned int irq)
 {
 	irq_desc_t *idesc = irq_desc + irq;
 
+	irq_complete_move(irq);
 	move_native_irq(irq);
 	/*
 	 * Once we have recorded IRQ_PENDING already, we can mask the
@@ -532,7 +534,7 @@ iosapic_reassign_vector (int irq)
 	if (iosapic_intr_info[irq].count) {
 		new_irq = create_irq();
 		if (new_irq < 0)
-			panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+			panic("%s: out of interrupt vectors!\n", __func__);
 		printk(KERN_INFO "Reassigning vector %d to %d\n",
 		       irq_to_vector(irq), irq_to_vector(new_irq));
 		memcpy(&iosapic_intr_info[new_irq], &iosapic_intr_info[irq],
@@ -597,7 +599,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	index = find_iosapic(gsi);
 	if (index < 0) {
 		printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
-		       __FUNCTION__, gsi);
+		       __func__, gsi);
 		return -ENODEV;
 	}
 
@@ -606,7 +608,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 		rte = iosapic_alloc_rte();
 		if (!rte) {
 			printk(KERN_WARNING "%s: cannot allocate memory\n",
-			       __FUNCTION__);
+			       __func__);
 			return -ENOMEM;
 		}
 
@@ -623,7 +625,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 		    (info->trigger != trigger || info->polarity != polarity)){
 			printk (KERN_WARNING
 				"%s: cannot override the interrupt\n",
-				__FUNCTION__);
+				__func__);
 			return -EINVAL;
 		}
 		rte->refcnt++;
@@ -645,7 +647,7 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 		if (idesc->chip != &no_irq_type)
 			printk(KERN_WARNING
 			       "%s: changing vector %d from %s to %s\n",
-			       __FUNCTION__, irq_to_vector(irq),
+			       __func__, irq_to_vector(irq),
 			       idesc->chip->name, irq_type->name);
 		idesc->chip = irq_type;
 	}
@@ -918,7 +920,7 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
 	      case ACPI_INTERRUPT_INIT:
 		irq = create_irq();
 		if (irq < 0)
-			panic("%s: out of interrupt vectors!\n", __FUNCTION__);
+			panic("%s: out of interrupt vectors!\n", __func__);
 		vector = irq_to_vector(irq);
 		delivery = IOSAPIC_INIT;
 		break;
@@ -929,7 +931,7 @@ iosapic_register_platform_intr (u32 int_type, unsigned int gsi,
 		mask = 1;
 		break;
 	      default:
-		printk(KERN_ERR "%s: invalid int type 0x%x\n", __FUNCTION__,
+		printk(KERN_ERR "%s: invalid int type 0x%x\n", __func__,
 		       int_type);
 		return -1;
 	}
@@ -994,7 +996,7 @@ iosapic_system_init (int system_pcat_compat)
 		 */
 		printk(KERN_INFO
 		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
-		       __FUNCTION__);
+		       __func__);
 		outb(0xff, 0xA1);
 		outb(0xff, 0x21);
 	}
@@ -1009,7 +1011,7 @@ iosapic_alloc (void)
 		if (!iosapic_lists[index].addr)
 			return index;
 
-	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __FUNCTION__);
+	printk(KERN_WARNING "%s: failed to allocate iosapic\n", __func__);
 	return -1;
 }
 
@@ -1107,14 +1109,14 @@ iosapic_remove (unsigned int gsi_base)
 	index = find_iosapic(gsi_base);
 	if (index < 0) {
 		printk(KERN_WARNING "%s: No IOSAPIC for GSI base %u\n",
-		       __FUNCTION__, gsi_base);
+		       __func__, gsi_base);
 		goto out;
 	}
 
 	if (iosapic_lists[index].rtes_inuse) {
 		err = -EBUSY;
 		printk(KERN_WARNING "%s: IOSAPIC for GSI base %u is busy\n",
-		       __FUNCTION__, gsi_base);
+		       __func__, gsi_base);
 		goto out;
 	}
 
@@ -1135,7 +1137,7 @@ map_iosapic_to_node(unsigned int gsi_base, int node)
 	index = find_iosapic(gsi_base);
 	if (index < 0) {
 		printk(KERN_WARNING "%s: No IOSAPIC for GSI %u\n",
-		       __FUNCTION__, gsi_base);
+		       __func__, gsi_base);
 		return;
 	}
 	iosapic_lists[index].node = node;
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 0b52f19ed046..5538471e8d68 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -260,6 +260,8 @@ void __setup_vector_irq(int cpu)
 }
 
 #if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+#define IA64_IRQ_MOVE_VECTOR	IA64_DEF_FIRST_DEVICE_VECTOR
+
 static enum vector_domain_type {
 	VECTOR_DOMAIN_NONE,
 	VECTOR_DOMAIN_PERCPU
@@ -272,6 +274,101 @@ static cpumask_t vector_allocation_domain(int cpu)
 	return CPU_MASK_ALL;
 }
 
+static int __irq_prepare_move(int irq, int cpu)
+{
+	struct irq_cfg *cfg = &irq_cfg[irq];
+	int vector;
+	cpumask_t domain;
+
+	if (cfg->move_in_progress || cfg->move_cleanup_count)
+		return -EBUSY;
+	if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
+		return -EINVAL;
+	if (cpu_isset(cpu, cfg->domain))
+		return 0;
+	domain = vector_allocation_domain(cpu);
+	vector = find_unassigned_vector(domain);
+	if (vector < 0)
+		return -ENOSPC;
+	cfg->move_in_progress = 1;
+	cfg->old_domain = cfg->domain;
+	cfg->vector = IRQ_VECTOR_UNASSIGNED;
+	cfg->domain = CPU_MASK_NONE;
+	BUG_ON(__bind_irq_vector(irq, vector, domain));
+	return 0;
+}
+
+int irq_prepare_move(int irq, int cpu)
+{
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&vector_lock, flags);
+	ret = __irq_prepare_move(irq, cpu);
+	spin_unlock_irqrestore(&vector_lock, flags);
+	return ret;
+}
+
+void irq_complete_move(unsigned irq)
+{
+	struct irq_cfg *cfg = &irq_cfg[irq];
+	cpumask_t cleanup_mask;
+	int i;
+
+	if (likely(!cfg->move_in_progress))
+		return;
+
+	if (unlikely(cpu_isset(smp_processor_id(), cfg->old_domain)))
+		return;
+
+	cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map);
+	cfg->move_cleanup_count = cpus_weight(cleanup_mask);
+	for_each_cpu_mask(i, cleanup_mask)
+		platform_send_ipi(i, IA64_IRQ_MOVE_VECTOR, IA64_IPI_DM_INT, 0);
+	cfg->move_in_progress = 0;
+}
+
+static irqreturn_t smp_irq_move_cleanup_interrupt(int irq, void *dev_id)
+{
+	int me = smp_processor_id();
+	ia64_vector vector;
+	unsigned long flags;
+
+	for (vector = IA64_FIRST_DEVICE_VECTOR;
+	     vector < IA64_LAST_DEVICE_VECTOR; vector++) {
+		int irq;
+		struct irq_desc *desc;
+		struct irq_cfg *cfg;
+		irq = __get_cpu_var(vector_irq)[vector];
+		if (irq < 0)
+			continue;
+
+		desc = irq_desc + irq;
+		cfg = irq_cfg + irq;
+		spin_lock(&desc->lock);
+		if (!cfg->move_cleanup_count)
+			goto unlock;
+
+		if (!cpu_isset(me, cfg->old_domain))
+			goto unlock;
+
+		spin_lock_irqsave(&vector_lock, flags);
+		__get_cpu_var(vector_irq)[vector] = -1;
+		cpu_clear(me, vector_table[vector]);
+		spin_unlock_irqrestore(&vector_lock, flags);
+		cfg->move_cleanup_count--;
+	unlock:
+		spin_unlock(&desc->lock);
+	}
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_move_irqaction = {
+	.handler =	smp_irq_move_cleanup_interrupt,
+	.flags =	IRQF_DISABLED,
+	.name =		"irq_move"
+};
+
 static int __init parse_vector_domain(char *arg)
 {
 	if (!arg)
@@ -303,36 +400,6 @@ void destroy_and_reserve_irq(unsigned int irq)
 	spin_unlock_irqrestore(&vector_lock, flags);
 }
 
-static int __reassign_irq_vector(int irq, int cpu)
-{
-	struct irq_cfg *cfg = &irq_cfg[irq];
-	int vector;
-	cpumask_t domain;
-
-	if (cfg->vector == IRQ_VECTOR_UNASSIGNED || !cpu_online(cpu))
-		return -EINVAL;
-	if (cpu_isset(cpu, cfg->domain))
-		return 0;
-	domain = vector_allocation_domain(cpu);
-	vector = find_unassigned_vector(domain);
-	if (vector < 0)
-		return -ENOSPC;
-	__clear_irq_vector(irq);
-	BUG_ON(__bind_irq_vector(irq, vector, domain));
-	return 0;
-}
-
-int reassign_irq_vector(int irq, int cpu)
-{
-	unsigned long flags;
-	int ret;
-
-	spin_lock_irqsave(&vector_lock, flags);
-	ret = __reassign_irq_vector(irq, cpu);
-	spin_unlock_irqrestore(&vector_lock, flags);
-	return ret;
-}
-
 /*
  * Dynamic irq allocate and deallocation for MSI
  */
@@ -405,7 +472,7 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 			static unsigned char count;
 			static long last_time;
 
-			if (jiffies - last_time > 5*HZ)
+			if (time_after(jiffies, last_time + 5 * HZ))
 				count = 0;
 			if (++count < 5) {
 				last_time = jiffies;
@@ -440,7 +507,7 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs)
 			if (unlikely(irq < 0)) {
 				printk(KERN_ERR "%s: Unexpected interrupt "
 				       "vector %d on CPU %d is not mapped "
-				       "to any IRQ!\n", __FUNCTION__, vector,
+				       "to any IRQ!\n", __func__, vector,
 				       smp_processor_id());
 			} else
 				generic_handle_irq(irq);
@@ -505,7 +572,7 @@ void ia64_process_pending_intr(void)
 			if (unlikely(irq < 0)) {
 				printk(KERN_ERR "%s: Unexpected interrupt "
 				       "vector %d on CPU %d not being mapped "
-				       "to any IRQ!!\n", __FUNCTION__, vector,
+				       "to any IRQ!!\n", __func__, vector,
 				       smp_processor_id());
 			} else {
 				vectors_in_migration[irq]=0;
@@ -578,6 +645,13 @@ init_IRQ (void)
 	register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
 	register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
 	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
+	if (vector_domain_type != VECTOR_DOMAIN_NONE) {
+		BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
+		IA64_FIRST_DEVICE_VECTOR++;
+		register_percpu_irq(IA64_IRQ_MOVE_VECTOR, &irq_move_irqaction);
+	}
+#endif
 #endif
 #ifdef CONFIG_PERFMON
 	pfm_init_percpu();
@@ -592,11 +666,7 @@ ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect)
 	unsigned long ipi_data;
 	unsigned long phys_cpu_id;
 
-#ifdef CONFIG_SMP
 	phys_cpu_id = cpu_physical_id(cpu);
-#else
-	phys_cpu_id = (ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff;
-#endif
 
 	/*
 	 * cpu number is in 8bit ID and 8bit EID
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 34f44d8be00d..6678c49daba3 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -805,8 +805,13 @@ ENTRY(break_fault)
 
 (p8)	adds r28=16,r28				// A    switch cr.iip to next bundle
 (p9)	adds r8=1,r8				// A    increment ei to next slot
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	;;
+	mov b6=r30				// I0   setup syscall handler branch reg early
+#else
 	nop.i 0
 	;;
+#endif
 
 	mov.m r25=ar.unat			// M2 (5 cyc)
 	dep r29=r8,r29,41,2			// I0   insert new ei into cr.ipsr
@@ -817,7 +822,11 @@ ENTRY(break_fault)
 	//
 ///////////////////////////////////////////////////////////////////////
 	st1 [r16]=r0				// M2|3 clear current->thread.on_ustack flag
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	mov.m r30=ar.itc			// M    get cycle for accounting
+#else
 	mov b6=r30				// I0   setup syscall handler branch reg early
+#endif
 	cmp.eq pKStk,pUStk=r0,r17		// A    were we on kernel stacks already?
 
 	and r9=_TIF_SYSCALL_TRACEAUDIT,r9	// A    mask trace or audit
@@ -829,6 +838,30 @@ ENTRY(break_fault)
 	cmp.eq p14,p0=r9,r0			// A    are syscalls being traced/audited?
 	br.call.sptk.many b7=ia64_syscall_setup	// B
 1:
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	// mov.m r30=ar.itc is called in advance, and r13 is current
+	add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13	// A
+	add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13	// A
+(pKStk)	br.cond.spnt .skip_accounting		// B	unlikely skip
+	;;
+	ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP	// M  get last stamp
+	ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE	// M  time at leave
+	;;
+	ld8 r20=[r16],TI_AC_STAMP-TI_AC_STIME	// M  cumulated stime
+	ld8 r21=[r17]				// M  cumulated utime
+	sub r22=r19,r18				// A  stime before leave
+	;;
+	st8 [r16]=r30,TI_AC_STIME-TI_AC_STAMP	// M  update stamp
+	sub r18=r30,r19				// A  elapsed time in user
+	;;
+	add r20=r20,r22				// A  sum stime
+	add r21=r21,r18				// A  sum utime
+	;;
+	st8 [r16]=r20				// M  update stime
+	st8 [r17]=r21				// M  update utime
+	;;
+.skip_accounting:
+#endif
 	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
 	nop 0
 	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
@@ -928,6 +961,7 @@ END(interrupt)
 	 *	- r27: saved ar.rsc
 	 *	- r28: saved cr.iip
 	 *	- r29: saved cr.ipsr
+	 *	- r30: ar.itc for accounting (don't touch)
 	 *	- r31: saved pr
 	 *	-  b0: original contents (to be saved)
 	 * On exit:
@@ -1090,6 +1124,41 @@ END(dispatch_illegal_op_fault)
 	DBG_FAULT(16)
 	FAULT(16)
 
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	/*
+	 * There is no particular reason for this code to be here, other than
+	 * that there happens to be space here that would go unused otherwise.
+	 * If this fault ever gets "unreserved", simply moved the following
+	 * code to a more suitable spot...
+	 *
+	 * account_sys_enter is called from SAVE_MIN* macros if accounting is
+	 * enabled and if the macro is entered from user mode.
+	 */
+ENTRY(account_sys_enter)
+	// mov.m r20=ar.itc is called in advance, and r13 is current
+	add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13
+	add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13
+	;;
+	ld8 r18=[r16],TI_AC_STIME-TI_AC_STAMP	// time at last check in kernel
+	ld8 r19=[r17],TI_AC_UTIME-TI_AC_LEAVE	// time at left from kernel
+        ;;
+	ld8 r23=[r16],TI_AC_STAMP-TI_AC_STIME	// cumulated stime
+	ld8 r21=[r17]				// cumulated utime
+	sub r22=r19,r18				// stime before leave kernel
+	;;
+	st8 [r16]=r20,TI_AC_STIME-TI_AC_STAMP	// update stamp
+	sub r18=r20,r19				// elapsed time in user mode
+	;;
+	add r23=r23,r22				// sum stime
+	add r21=r21,r18				// sum utime
+	;;
+	st8 [r16]=r23				// update stime
+	st8 [r17]=r21				// update utime
+	;;
+	br.ret.sptk.many rp
+END(account_sys_enter)
+#endif
+
 	.org ia64_ivt+0x4400
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4400 Entry 17 (size 64 bundles) Reserved
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index b618487cdc85..233434f4f88f 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -78,6 +78,20 @@ static enum instruction_type bundle_encoding[32][3] = {
   { u, u, u },  			/* 1F */
 };
 
+/* Insert a long branch code */
+static void __kprobes set_brl_inst(void *from, void *to)
+{
+	s64 rel = ((s64) to - (s64) from) >> 4;
+	bundle_t *brl;
+	brl = (bundle_t *) ((u64) from & ~0xf);
+	brl->quad0.template = 0x05;	/* [MLX](stop) */
+	brl->quad0.slot0 = NOP_M_INST;	/* nop.m 0x0 */
+	brl->quad0.slot1_p0 = ((rel >> 20) & 0x7fffffffff) << 2;
+	brl->quad1.slot1_p1 = (((rel >> 20) & 0x7fffffffff) << 2) >> (64 - 46);
+	/* brl.cond.sptk.many.clr rel<<4 (qp=0) */
+	brl->quad1.slot2 = BRL_INST(rel >> 59, rel & 0xfffff);
+}
+
 /*
  * In this function we check to see if the instruction
  * is IP relative instruction and update the kprobe
@@ -496,6 +510,77 @@ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 	regs->b0 = ((struct fnptr *)kretprobe_trampoline)->ip;
 }
 
+/* Check the instruction in the slot is break */
+static int __kprobes __is_ia64_break_inst(bundle_t *bundle, uint slot)
+{
+	unsigned int major_opcode;
+	unsigned int template = bundle->quad0.template;
+	unsigned long kprobe_inst;
+
+	/* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */
+	if (slot == 1 && bundle_encoding[template][1] == L)
+		slot++;
+
+	/* Get Kprobe probe instruction at given slot*/
+	get_kprobe_inst(bundle, slot, &kprobe_inst, &major_opcode);
+
+	/* For break instruction,
+	 * Bits 37:40 Major opcode to be zero
+	 * Bits 27:32 X6 to be zero
+	 * Bits 32:35 X3 to be zero
+	 */
+	if (major_opcode || ((kprobe_inst >> 27) & 0x1FF)) {
+		/* Not a break instruction */
+		return 0;
+	}
+
+	/* Is a break instruction */
+	return 1;
+}
+
+/*
+ * In this function, we check whether the target bundle modifies IP or
+ * it triggers an exception. If so, it cannot be boostable.
+ */
+static int __kprobes can_boost(bundle_t *bundle, uint slot,
+			       unsigned long bundle_addr)
+{
+	unsigned int template = bundle->quad0.template;
+
+	do {
+		if (search_exception_tables(bundle_addr + slot) ||
+		    __is_ia64_break_inst(bundle, slot))
+			return 0;	/* exception may occur in this bundle*/
+	} while ((++slot) < 3);
+	template &= 0x1e;
+	if (template >= 0x10 /* including B unit */ ||
+	    template == 0x04 /* including X unit */ ||
+	    template == 0x06) /* undefined */
+		return 0;
+
+	return 1;
+}
+
+/* Prepare long jump bundle and disables other boosters if need */
+static void __kprobes prepare_booster(struct kprobe *p)
+{
+	unsigned long addr = (unsigned long)p->addr & ~0xFULL;
+	unsigned int slot = (unsigned long)p->addr & 0xf;
+	struct kprobe *other_kp;
+
+	if (can_boost(&p->ainsn.insn[0].bundle, slot, addr)) {
+		set_brl_inst(&p->ainsn.insn[1].bundle, (bundle_t *)addr + 1);
+		p->ainsn.inst_flag |= INST_FLAG_BOOSTABLE;
+	}
+
+	/* disables boosters in previous slots */
+	for (; addr < (unsigned long)p->addr; addr++) {
+		other_kp = get_kprobe((void *)addr);
+		if (other_kp)
+			other_kp->ainsn.inst_flag &= ~INST_FLAG_BOOSTABLE;
+	}
+}
+
 int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	unsigned long addr = (unsigned long) p->addr;
@@ -530,6 +615,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 
 	prepare_break_inst(template, slot, major_opcode, kprobe_inst, p, qp);
 
+	prepare_booster(p);
+
 	return 0;
 }
 
@@ -543,7 +630,9 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	src = &p->opcode.bundle;
 
 	flush_icache_range((unsigned long)p->ainsn.insn,
-			(unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t));
+			   (unsigned long)p->ainsn.insn +
+			   sizeof(kprobe_opcode_t) * MAX_INSN_SIZE);
+
 	switch (p->ainsn.slot) {
 		case 0:
 			dest->quad0.slot0 = src->quad0.slot0;
@@ -584,13 +673,13 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
 	mutex_lock(&kprobe_mutex);
-	free_insn_slot(p->ainsn.insn, 0);
+	free_insn_slot(p->ainsn.insn, p->ainsn.inst_flag & INST_FLAG_BOOSTABLE);
 	mutex_unlock(&kprobe_mutex);
 }
 /*
  * We are resuming execution after a single step fault, so the pt_regs
  * structure reflects the register state after we executed the instruction
- * located in the kprobe (p->ainsn.insn.bundle).  We still need to adjust
+ * located in the kprobe (p->ainsn.insn->bundle).  We still need to adjust
  * the ip to point back to the original stack address. To set the IP address
  * to original stack address, handle the case where we need to fixup the
  * relative IP address and/or fixup branch register.
@@ -607,7 +696,7 @@ static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 	if (slot == 1 && bundle_encoding[template][1] == L)
 		slot = 2;
 
-	if (p->ainsn.inst_flag) {
+	if (p->ainsn.inst_flag & ~INST_FLAG_BOOSTABLE) {
 
 		if (p->ainsn.inst_flag & INST_FLAG_FIX_RELATIVE_IP_ADDR) {
 			/* Fix relative IP address */
@@ -686,33 +775,12 @@ static void __kprobes prepare_ss(struct kprobe *p, struct pt_regs *regs)
 static int __kprobes is_ia64_break_inst(struct pt_regs *regs)
 {
 	unsigned int slot = ia64_psr(regs)->ri;
-	unsigned int template, major_opcode;
-	unsigned long kprobe_inst;
 	unsigned long *kprobe_addr = (unsigned long *)regs->cr_iip;
 	bundle_t bundle;
 
 	memcpy(&bundle, kprobe_addr, sizeof(bundle_t));
-	template = bundle.quad0.template;
-
-	/* Move to slot 2, if bundle is MLX type and kprobe slot is 1 */
-	if (slot == 1 && bundle_encoding[template][1] == L)
-		slot++;
-
-	/* Get Kprobe probe instruction at given slot*/
-	get_kprobe_inst(&bundle, slot, &kprobe_inst, &major_opcode);
 
-	/* For break instruction,
-	 * Bits 37:40 Major opcode to be zero
-	 * Bits 27:32 X6 to be zero
-	 * Bits 32:35 X3 to be zero
-	 */
-	if (major_opcode || ((kprobe_inst >> 27) & 0x1FF) ) {
-		/* Not a break instruction */
-		return 0;
-	}
-
-	/* Is a break instruction */
-	return 1;
+	return __is_ia64_break_inst(&bundle, slot);
 }
 
 static int __kprobes pre_kprobes_handler(struct die_args *args)
@@ -802,6 +870,19 @@ static int __kprobes pre_kprobes_handler(struct die_args *args)
 		return 1;
 
 ss_probe:
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+	if (p->ainsn.inst_flag == INST_FLAG_BOOSTABLE && !p->post_handler) {
+		/* Boost up -- we can execute copied instructions directly */
+		ia64_psr(regs)->ri = p->ainsn.slot;
+		regs->cr_iip = (unsigned long)&p->ainsn.insn->bundle & ~0xFULL;
+		/* turn single stepping off */
+		ia64_psr(regs)->ss = 0;
+
+		reset_current_kprobe();
+		preempt_enable_no_resched();
+		return 1;
+	}
+#endif
 	prepare_ss(p, regs);
 	kcb->kprobe_status = KPROBE_HIT_SS;
 	return 1;
@@ -838,7 +919,7 @@ out:
 	return 1;
 }
 
-int __kprobes kprobes_fault_handler(struct pt_regs *regs, int trapnr)
+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 {
 	struct kprobe *cur = kprobe_running();
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
@@ -1001,6 +1082,11 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
+/* ia64 does not need this */
+void __kprobes jprobe_return(void)
+{
+}
+
 int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 6e17aed53135..e51bced3b0fa 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -69,6 +69,7 @@
  * 2007-04-27 Russ Anderson <rja@sgi.com>
  *	      Support multiple cpus going through OS_MCA in the same event.
  */
+#include <linux/jiffies.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/sched.h>
@@ -97,6 +98,7 @@
 
 #include <asm/irq.h>
 #include <asm/hw_irq.h>
+#include <asm/tlb.h>
 
 #include "mca_drv.h"
 #include "entry.h"
@@ -112,6 +114,7 @@ DEFINE_PER_CPU(u64, ia64_mca_data); /* == __per_cpu_mca[smp_processor_id()] */
 DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */
 DEFINE_PER_CPU(u64, ia64_mca_pal_pte);	    /* PTE to map PAL code */
 DEFINE_PER_CPU(u64, ia64_mca_pal_base);    /* vaddr PAL code granule */
+DEFINE_PER_CPU(u64, ia64_mca_tr_reload);   /* Flag for TR reload */
 
 unsigned long __per_cpu_mca[NR_CPUS];
 
@@ -293,7 +296,8 @@ static void ia64_mlogbuf_dump_from_init(void)
 	if (mlogbuf_finished)
 		return;
 
-	if (mlogbuf_timestamp && (mlogbuf_timestamp + 30*HZ > jiffies)) {
+	if (mlogbuf_timestamp &&
+			time_before(jiffies, mlogbuf_timestamp + 30 * HZ)) {
 		printk(KERN_ERR "INIT: mlogbuf_dump is interrupted by INIT "
 			" and the system seems to be messed up.\n");
 		ia64_mlogbuf_finish(0);
@@ -413,8 +417,8 @@ ia64_log_get(int sal_info_type, u8 **buffer, int irq_safe)
 		IA64_LOG_INDEX_INC(sal_info_type);
 		IA64_LOG_UNLOCK(sal_info_type);
 		if (irq_safe) {
-			IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. "
-				       "Record length = %ld\n", __FUNCTION__, sal_info_type, total_len);
+			IA64_MCA_DEBUG("%s: SAL error record type %d retrieved. Record length = %ld\n",
+				       __func__, sal_info_type, total_len);
 		}
 		*buffer = (u8 *) log_buffer;
 		return total_len;
@@ -518,7 +522,7 @@ ia64_mca_cpe_int_handler (int cpe_irq, void *arg)
 	static DEFINE_SPINLOCK(cpe_history_lock);
 
 	IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
-		       __FUNCTION__, cpe_irq, smp_processor_id());
+		       __func__, cpe_irq, smp_processor_id());
 
 	/* SAL spec states this should run w/ interrupts enabled */
 	local_irq_enable();
@@ -594,7 +598,7 @@ ia64_mca_register_cpev (int cpev)
 	}
 
 	IA64_MCA_DEBUG("%s: corrected platform error "
-		       "vector %#x registered\n", __FUNCTION__, cpev);
+		       "vector %#x registered\n", __func__, cpev);
 }
 #endif /* CONFIG_ACPI */
 
@@ -621,12 +625,11 @@ ia64_mca_cmc_vector_setup (void)
 	cmcv.cmcv_vector	= IA64_CMC_VECTOR;
 	ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
 
-	IA64_MCA_DEBUG("%s: CPU %d corrected "
-		       "machine check vector %#x registered.\n",
-		       __FUNCTION__, smp_processor_id(), IA64_CMC_VECTOR);
+	IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x registered.\n",
+		       __func__, smp_processor_id(), IA64_CMC_VECTOR);
 
 	IA64_MCA_DEBUG("%s: CPU %d CMCV = %#016lx\n",
-		       __FUNCTION__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
+		       __func__, smp_processor_id(), ia64_getreg(_IA64_REG_CR_CMCV));
 }
 
 /*
@@ -651,9 +654,8 @@ ia64_mca_cmc_vector_disable (void *dummy)
 	cmcv.cmcv_mask = 1; /* Mask/disable interrupt */
 	ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
 
-	IA64_MCA_DEBUG("%s: CPU %d corrected "
-		       "machine check vector %#x disabled.\n",
-		       __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+	IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x disabled.\n",
+		       __func__, smp_processor_id(), cmcv.cmcv_vector);
 }
 
 /*
@@ -678,9 +680,8 @@ ia64_mca_cmc_vector_enable (void *dummy)
 	cmcv.cmcv_mask = 0; /* Unmask/enable interrupt */
 	ia64_setreg(_IA64_REG_CR_CMCV, cmcv.cmcv_regval);
 
-	IA64_MCA_DEBUG("%s: CPU %d corrected "
-		       "machine check vector %#x enabled.\n",
-		       __FUNCTION__, smp_processor_id(), cmcv.cmcv_vector);
+	IA64_MCA_DEBUG("%s: CPU %d corrected machine check vector %#x enabled.\n",
+		       __func__, smp_processor_id(), cmcv.cmcv_vector);
 }
 
 /*
@@ -767,7 +768,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg)
 	local_irq_save(flags);
 	if (notify_die(DIE_MCA_RENDZVOUS_ENTER, "MCA", get_irq_regs(),
 		       (long)&nd, 0, 0) == NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_DONE;
 	/* Register with the SAL monarch that the slave has
@@ -777,7 +778,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg)
 
 	if (notify_die(DIE_MCA_RENDZVOUS_PROCESS, "MCA", get_irq_regs(),
 		       (long)&nd, 0, 0) == NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	/* Wait for the monarch cpu to exit. */
 	while (monarch_cpu != -1)
@@ -785,7 +786,7 @@ ia64_mca_rendez_int_handler(int rendez_irq, void *arg)
 
 	if (notify_die(DIE_MCA_RENDZVOUS_LEAVE, "MCA", get_irq_regs(),
 		       (long)&nd, 0, 0) == NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
 	/* Enable all interrupts */
@@ -1185,6 +1186,49 @@ all_in:
 	return;
 }
 
+/*  mca_insert_tr
+ *
+ *  Switch rid when TR reload and needed!
+ *  iord: 1: itr, 2: itr;
+ *
+*/
+static void mca_insert_tr(u64 iord)
+{
+
+	int i;
+	u64 old_rr;
+	struct ia64_tr_entry *p;
+	unsigned long psr;
+	int cpu = smp_processor_id();
+
+	psr = ia64_clear_ic();
+	for (i = IA64_TR_ALLOC_BASE; i < IA64_TR_ALLOC_MAX; i++) {
+		p = &__per_cpu_idtrs[cpu][iord-1][i];
+		if (p->pte & 0x1) {
+			old_rr = ia64_get_rr(p->ifa);
+			if (old_rr != p->rr) {
+				ia64_set_rr(p->ifa, p->rr);
+				ia64_srlz_d();
+			}
+			ia64_ptr(iord, p->ifa, p->itir >> 2);
+			ia64_srlz_i();
+			if (iord & 0x1) {
+				ia64_itr(0x1, i, p->ifa, p->pte, p->itir >> 2);
+				ia64_srlz_i();
+			}
+			if (iord & 0x2) {
+				ia64_itr(0x2, i, p->ifa, p->pte, p->itir >> 2);
+				ia64_srlz_i();
+			}
+			if (old_rr != p->rr) {
+				ia64_set_rr(p->ifa, old_rr);
+				ia64_srlz_d();
+			}
+		}
+	}
+	ia64_set_psr(psr);
+}
+
 /*
  * ia64_mca_handler
  *
@@ -1230,7 +1274,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 
 	if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA;
 	if (sos->monarch) {
@@ -1246,7 +1290,7 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 		ia64_mca_wakeup_all();
 		if (notify_die(DIE_MCA_MONARCH_PROCESS, "MCA", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 	} else {
 		while (cpu_isset(cpu, mca_cpu))
 			cpu_relax();	/* spin until monarch wakes us */
@@ -1269,15 +1313,16 @@ ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
 	} else {
 		/* Dump buffered message to console */
 		ia64_mlogbuf_finish(1);
-#ifdef CONFIG_KEXEC
-		atomic_set(&kdump_in_progress, 1);
-		monarch_cpu = -1;
-#endif
 	}
+
+	if (__get_cpu_var(ia64_mca_tr_reload)) {
+		mca_insert_tr(0x1); /*Reload dynamic itrs*/
+		mca_insert_tr(0x2); /*Reload dynamic itrs*/
+	}
+
 	if (notify_die(DIE_MCA_MONARCH_LEAVE, "MCA", regs, (long)&nd, 0, recover)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
-
+		ia64_mca_spin(__func__);
 
 	if (atomic_dec_return(&mca_count) > 0) {
 		int i;
@@ -1328,7 +1373,7 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg)
 	static DEFINE_SPINLOCK(cmc_history_lock);
 
 	IA64_MCA_DEBUG("%s: received interrupt vector = %#x on CPU %d\n",
-		       __FUNCTION__, cmc_irq, smp_processor_id());
+		       __func__, cmc_irq, smp_processor_id());
 
 	/* SAL spec states this should run w/ interrupts enabled */
 	local_irq_enable();
@@ -1614,7 +1659,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	if (!sos->monarch && atomic_add_return(1, &slaves) == num_online_cpus()) {
 		mprintk(KERN_WARNING "%s: Promoting cpu %d to monarch.\n",
-		       __FUNCTION__, cpu);
+		        __func__, cpu);
 		atomic_dec(&slaves);
 		sos->monarch = 1;
 	}
@@ -1626,7 +1671,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	if (sos->monarch && atomic_add_return(1, &monarchs) > 1) {
 		mprintk(KERN_WARNING "%s: Demoting cpu %d to slave.\n",
-			       __FUNCTION__, cpu);
+			       __func__, cpu);
 		atomic_dec(&monarchs);
 		sos->monarch = 0;
 	}
@@ -1637,15 +1682,15 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 		       cpu_relax();	/* spin until monarch enters */
 		if (notify_die(DIE_INIT_SLAVE_ENTER, "INIT", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 		if (notify_die(DIE_INIT_SLAVE_PROCESS, "INIT", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 		while (monarch_cpu != -1)
 		       cpu_relax();	/* spin until monarch leaves */
 		if (notify_die(DIE_INIT_SLAVE_LEAVE, "INIT", regs, (long)&nd, 0, 0)
 				== NOTIFY_STOP)
-			ia64_mca_spin(__FUNCTION__);
+			ia64_mca_spin(__func__);
 		mprintk("Slave on cpu %d returning to normal service.\n", cpu);
 		set_curr_task(cpu, previous_current);
 		ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
@@ -1656,7 +1701,7 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	monarch_cpu = cpu;
 	if (notify_die(DIE_INIT_MONARCH_ENTER, "INIT", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 
 	/*
 	 * Wait for a bit.  On some machines (e.g., HP's zx2000 and zx6000, INIT can be
@@ -1673,10 +1718,10 @@ ia64_init_handler(struct pt_regs *regs, struct switch_stack *sw,
 	 */
 	if (notify_die(DIE_INIT_MONARCH_PROCESS, "INIT", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 	if (notify_die(DIE_INIT_MONARCH_LEAVE, "INIT", regs, (long)&nd, 0, 0)
 			== NOTIFY_STOP)
-		ia64_mca_spin(__FUNCTION__);
+		ia64_mca_spin(__func__);
 	mprintk("\nINIT dump complete.  Monarch on cpu %d returning to normal service.\n", cpu);
 	atomic_dec(&monarchs);
 	set_curr_task(cpu, previous_current);
@@ -1884,7 +1929,7 @@ ia64_mca_init(void)
 		.priority = 0/* we need to notified last */
 	};
 
-	IA64_MCA_DEBUG("%s: begin\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: begin\n", __func__);
 
 	/* Clear the Rendez checkin flag for all cpus */
 	for(i = 0 ; i < NR_CPUS; i++)
@@ -1928,7 +1973,7 @@ ia64_mca_init(void)
 		return;
 	}
 
-	IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: registered MCA rendezvous spinloop and wakeup mech.\n", __func__);
 
 	ia64_mc_info.imi_mca_handler        = ia64_tpa(mca_hldlr_ptr->fp);
 	/*
@@ -1949,7 +1994,7 @@ ia64_mca_init(void)
 		return;
 	}
 
-	IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __FUNCTION__,
+	IA64_MCA_DEBUG("%s: registered OS MCA handler with SAL at 0x%lx, gp = 0x%lx\n", __func__,
 		       ia64_mc_info.imi_mca_handler, ia64_tpa(mca_hldlr_ptr->gp));
 
 	/*
@@ -1961,7 +2006,7 @@ ia64_mca_init(void)
 	ia64_mc_info.imi_slave_init_handler		= ia64_tpa(init_hldlr_ptr_slave->fp);
 	ia64_mc_info.imi_slave_init_handler_size	= 0;
 
-	IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __FUNCTION__,
+	IA64_MCA_DEBUG("%s: OS INIT handler at %lx\n", __func__,
 		       ia64_mc_info.imi_monarch_init_handler);
 
 	/* Register the os init handler with SAL */
@@ -1982,7 +2027,7 @@ ia64_mca_init(void)
 		return;
 	}
 
-	IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: registered OS INIT handler with SAL\n", __func__);
 
 	/*
 	 *  Configure the CMCI/P vector and handler. Interrupts for CMC are
@@ -2042,7 +2087,7 @@ ia64_mca_late_init(void)
 	cmc_polling_enabled = 0;
 	schedule_work(&cmc_enable_work);
 
-	IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __FUNCTION__);
+	IA64_MCA_DEBUG("%s: CMCI/P setup and enabled.\n", __func__);
 
 #ifdef CONFIG_ACPI
 	/* Setup the CPEI/P vector and handler */
@@ -2065,17 +2110,17 @@ ia64_mca_late_init(void)
 				ia64_cpe_irq = irq;
 				ia64_mca_register_cpev(cpe_vector);
 				IA64_MCA_DEBUG("%s: CPEI/P setup and enabled.\n",
-					__FUNCTION__);
+					__func__);
 				return 0;
 			}
 			printk(KERN_ERR "%s: Failed to find irq for CPE "
 					"interrupt handler, vector %d\n",
-					__FUNCTION__, cpe_vector);
+					__func__, cpe_vector);
 		}
 		/* If platform doesn't support CPEI, get the timer going. */
 		if (cpe_poll_enabled) {
 			ia64_mca_cpe_poll(0UL);
-			IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __FUNCTION__);
+			IA64_MCA_DEBUG("%s: CPEP setup and enabled.\n", __func__);
 		}
 	}
 #endif
diff --git a/arch/ia64/kernel/mca_asm.S b/arch/ia64/kernel/mca_asm.S
index 8bc7d259e0c6..a06d46548ff9 100644
--- a/arch/ia64/kernel/mca_asm.S
+++ b/arch/ia64/kernel/mca_asm.S
@@ -219,8 +219,13 @@ ia64_reload_tr:
 	mov r20=IA64_TR_CURRENT_STACK
 	;;
 	itr.d dtr[r20]=r16
+	GET_THIS_PADDR(r2, ia64_mca_tr_reload)
+	mov r18 = 1
 	;;
 	srlz.d
+	;;
+	st8 [r2] =r18
+	;;
 
 done_tlb_purge_and_reload:
 
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index c9ac8bada786..7c548ac52bbc 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -3,6 +3,18 @@
 
 #include "entry.h"
 
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+/* read ar.itc in advance, and use it before leaving bank 0 */
+#define ACCOUNT_GET_STAMP				\
+(pUStk) mov.m r20=ar.itc;
+#define ACCOUNT_SYS_ENTER				\
+(pUStk) br.call.spnt rp=account_sys_enter		\
+	;;
+#else
+#define ACCOUNT_GET_STAMP
+#define ACCOUNT_SYS_ENTER
+#endif
+
 /*
  * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
  * the minimum state necessary that allows us to turn psr.ic back
@@ -122,11 +134,13 @@
 	;;											\
 .mem.offset 0,0; st8.spill [r16]=r2,16;								\
 .mem.offset 8,0; st8.spill [r17]=r3,16;								\
+	ACCOUNT_GET_STAMP									\
 	adds r2=IA64_PT_REGS_R16_OFFSET,r1;							\
 	;;											\
 	EXTRA;											\
 	movl r1=__gp;		/* establish kernel global pointer */				\
 	;;											\
+	ACCOUNT_SYS_ENTER									\
 	bsw.1;			/* switch back to bank 1 (must be last in insn group) */	\
 	;;
 
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index e58f4367cf11..e83e2ea3b3e0 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -493,7 +493,7 @@ module_frob_arch_sections (Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, char *secstrings,
 	mod->arch.opd->sh_addralign = 8;
 	mod->arch.opd->sh_size = fdescs * sizeof(struct fdesc);
 	DEBUGP("%s: core.plt=%lx, init.plt=%lx, got=%lx, fdesc=%lx\n",
-	       __FUNCTION__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
+	       __func__, mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size,
 	       mod->arch.got->sh_size, mod->arch.opd->sh_size);
 	return 0;
 }
@@ -585,7 +585,7 @@ get_plt (struct module *mod, const struct insn *insn, uint64_t value, int *okp)
 #if ARCH_MODULE_DEBUG
 	if (plt_target(plt) != target_ip) {
 		printk("%s: mistargeted PLT: wanted %lx, got %lx\n",
-		       __FUNCTION__, target_ip, plt_target(plt));
+		       __func__, target_ip, plt_target(plt));
 		*okp = 0;
 		return 0;
 	}
@@ -703,7 +703,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 		if (r_type == R_IA64_PCREL21BI) {
 			if (!is_internal(mod, val)) {
 				printk(KERN_ERR "%s: %s reloc against non-local symbol (%lx)\n",
-				       __FUNCTION__, reloc_name[r_type], val);
+				       __func__, reloc_name[r_type], val);
 				return -ENOEXEC;
 			}
 			format = RF_INSN21B;
@@ -737,7 +737,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 		      case R_IA64_LDXMOV:
 			if (gp_addressable(mod, val)) {
 				/* turn "ld8" into "mov": */
-				DEBUGP("%s: patching ld8 at %p to mov\n", __FUNCTION__, location);
+				DEBUGP("%s: patching ld8 at %p to mov\n", __func__, location);
 				ia64_patch((u64) location, 0x1fff80fe000UL, 0x10000000000UL);
 			}
 			return 0;
@@ -771,7 +771,7 @@ do_reloc (struct module *mod, uint8_t r_type, Elf64_Sym *sym, uint64_t addend,
 	if (!ok)
 		return -ENOEXEC;
 
-	DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __FUNCTION__, location, val,
+	DEBUGP("%s: [%p]<-%016lx = %s(%lx)\n", __func__, location, val,
 	       reloc_name[r_type] ? reloc_name[r_type] : "?", sym->st_value + addend);
 
 	switch (format) {
@@ -807,7 +807,7 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 	Elf64_Shdr *target_sec;
 	int ret;
 
-	DEBUGP("%s: applying section %u (%u relocs) to %u\n", __FUNCTION__,
+	DEBUGP("%s: applying section %u (%u relocs) to %u\n", __func__,
 	       relsec, n, sechdrs[relsec].sh_info);
 
 	target_sec = sechdrs + sechdrs[relsec].sh_info;
@@ -835,7 +835,7 @@ apply_relocate_add (Elf64_Shdr *sechdrs, const char *strtab, unsigned int symind
 			gp = mod->core_size / 2;
 		gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
 		mod->arch.gp = gp;
-		DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp);
+		DEBUGP("%s: placing gp at 0x%lx\n", __func__, gp);
 	}
 
 	for (i = 0; i < n; i++) {
@@ -903,7 +903,7 @@ register_unwind_table (struct module *mod)
 		init = start + num_core;
 	}
 
-	DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __FUNCTION__,
+	DEBUGP("%s: name=%s, gp=%lx, num_init=%lu, num_core=%lu\n", __func__,
 	       mod->name, mod->arch.gp, num_init, num_core);
 
 	/*
@@ -912,13 +912,13 @@ register_unwind_table (struct module *mod)
 	if (num_core > 0) {
 		mod->arch.core_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
 								core, core + num_core);
-		DEBUGP("%s:  core: handle=%p [%p-%p)\n", __FUNCTION__,
+		DEBUGP("%s:  core: handle=%p [%p-%p)\n", __func__,
 		       mod->arch.core_unw_table, core, core + num_core);
 	}
 	if (num_init > 0) {
 		mod->arch.init_unw_table = unw_add_unwind_table(mod->name, 0, mod->arch.gp,
 								init, init + num_init);
-		DEBUGP("%s:  init: handle=%p [%p-%p)\n", __FUNCTION__,
+		DEBUGP("%s:  init: handle=%p [%p-%p)\n", __func__,
 		       mod->arch.init_unw_table, init, init + num_init);
 	}
 }
@@ -926,7 +926,7 @@ register_unwind_table (struct module *mod)
 int
 module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *mod)
 {
-	DEBUGP("%s: init: entry=%p\n", __FUNCTION__, mod->init);
+	DEBUGP("%s: init: entry=%p\n", __func__, mod->init);
 	if (mod->arch.unwind)
 		register_unwind_table(mod);
 	return 0;
diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c
index e86d02959794..60c6ef67ebb2 100644
--- a/arch/ia64/kernel/msi_ia64.c
+++ b/arch/ia64/kernel/msi_ia64.c
@@ -57,7 +57,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, cpumask_t cpu_mask)
 	if (!cpu_online(cpu))
 		return;
 
-	if (reassign_irq_vector(irq, cpu))
+	if (irq_prepare_move(irq, cpu))
 		return;
 
 	read_msi_msg(irq, &msg);
@@ -119,6 +119,7 @@ void ia64_teardown_msi_irq(unsigned int irq)
 
 static void ia64_ack_msi_irq(unsigned int irq)
 {
+	irq_complete_move(irq);
 	move_native_irq(irq);
 	ia64_eoi();
 }
diff --git a/arch/ia64/kernel/numa.c b/arch/ia64/kernel/numa.c
index a78b45f5fe2f..c93420c97409 100644
--- a/arch/ia64/kernel/numa.c
+++ b/arch/ia64/kernel/numa.c
@@ -73,7 +73,7 @@ void __init build_cpu_to_node_map(void)
 	for(node=0; node < MAX_NUMNODES; node++)
 		cpus_clear(node_to_cpu_mask[node]);
 
-	for(cpu = 0; cpu < NR_CPUS; ++cpu) {
+	for_each_possible_early_cpu(cpu) {
 		node = -1;
 		for (i = 0; i < NR_CPUS; ++i)
 			if (cpu_physical_id(cpu) == node_cpuid[i].phys_id) {
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index 2cb9425e0421..e0dca8743dbb 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -135,10 +135,10 @@ ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
 
 	while (offp < (s32 *) end) {
 		wp = (u64 *) ia64_imva((char *) offp + *offp);
-		wp[0] = 0x0000000100000000UL; /* nop.m 0; nop.i 0; nop.i 0 */
-		wp[1] = 0x0004000000000200UL;
-		wp[2] = 0x0000000100000011UL; /* nop.m 0; nop.i 0; br.ret.sptk.many b6 */
-		wp[3] = 0x0084006880000200UL;
+		wp[0] = 0x0000000100000011UL; /* nop.m 0; nop.i 0; br.ret.sptk.many b6 */
+		wp[1] = 0x0084006880000200UL;
+		wp[2] = 0x0000000100000000UL; /* nop.m 0; nop.i 0; nop.i 0 */
+		wp[3] = 0x0004000000000200UL;
 		ia64_fc(wp); ia64_fc(wp + 2);
 		++offp;
 	}
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index f6b99719f10f..d1d24f4598da 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -227,12 +227,12 @@
 #ifdef PFM_DEBUGGING
 #define DPRINT(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
 	} while (0)
 
 #define DPRINT_ovfl(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __FUNCTION__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
+		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d [%d] ", __func__, __LINE__, smp_processor_id(), task_pid_nr(current)); printk a; } \
 	} while (0)
 #endif
 
@@ -4204,10 +4204,10 @@ pfm_check_task_exist(pfm_context_t *ctx)
 	do_each_thread (g, t) {
 		if (t->thread.pfm_context == ctx) {
 			ret = 0;
-			break;
+			goto out;
 		}
 	} while_each_thread (g, t);
-
+out:
 	read_unlock(&tasklist_lock);
 
 	DPRINT(("pfm_check_task_exist: ret=%d ctx=%p\n", ret, ctx));
diff --git a/arch/ia64/kernel/perfmon_default_smpl.c b/arch/ia64/kernel/perfmon_default_smpl.c
index a7af1cb419f9..5f637bbfcccd 100644
--- a/arch/ia64/kernel/perfmon_default_smpl.c
+++ b/arch/ia64/kernel/perfmon_default_smpl.c
@@ -24,12 +24,12 @@ MODULE_LICENSE("GPL");
 #ifdef DEFAULT_DEBUG
 #define DPRINT(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+		if (unlikely(pfm_sysctl.debug >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
 	} while (0)
 
 #define DPRINT_ovfl(a) \
 	do { \
-		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __FUNCTION__, __LINE__, smp_processor_id()); printk a; } \
+		if (unlikely(pfm_sysctl.debug > 0 && pfm_sysctl.debug_ovfl >0)) { printk("%s.%d: CPU%d ", __func__, __LINE__, smp_processor_id()); printk a; } \
 	} while (0)
 
 #else
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 49937a383b23..a5ea817cbcbf 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -625,21 +625,6 @@ do_dump_fpu (struct unw_frame_info *info, void *arg)
 	do_dump_task_fpu(current, info, arg);
 }
 
-int
-dump_task_regs(struct task_struct *task, elf_gregset_t *regs)
-{
-	struct unw_frame_info tcore_info;
-
-	if (current == task) {
-		unw_init_running(do_copy_regs, regs);
-	} else {
-		memset(&tcore_info, 0, sizeof(tcore_info));
-		unw_init_from_blocked_task(&tcore_info, task);
-		do_copy_task_regs(task, &tcore_info, regs);
-	}
-	return 1;
-}
-
 void
 ia64_elf_core_copy_regs (struct pt_regs *pt, elf_gregset_t dst)
 {
@@ -647,21 +632,6 @@ ia64_elf_core_copy_regs (struct pt_regs *pt, elf_gregset_t dst)
 }
 
 int
-dump_task_fpu (struct task_struct *task, elf_fpregset_t *dst)
-{
-	struct unw_frame_info tcore_info;
-
-	if (current == task) {
-		unw_init_running(do_dump_fpu, dst);
-	} else {
-		memset(&tcore_info, 0, sizeof(tcore_info));
-		unw_init_from_blocked_task(&tcore_info, task);
-		do_dump_task_fpu(task, &tcore_info, dst);
-	}
-	return 1;
-}
-
-int
 dump_fpu (struct pt_regs *pt, elf_fpregset_t dst)
 {
 	unw_init_running(do_dump_fpu, dst);
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 331d6768b5d5..2a9943b5947f 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -3,6 +3,9 @@
  *
  * Copyright (C) 1999-2005 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2006 Intel Co
+ *  2006-08-12	- IA64 Native Utrace implementation support added by
+ *	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
  *
  * Derived from the x86 and Alpha versions.
  */
@@ -17,6 +20,8 @@
 #include <linux/security.h>
 #include <linux/audit.h>
 #include <linux/signal.h>
+#include <linux/regset.h>
+#include <linux/elf.h>
 
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -698,52 +703,6 @@ thread_matches (struct task_struct *thread, unsigned long addr)
 }
 
 /*
- * GDB apparently wants to be able to read the register-backing store
- * of any thread when attached to a given process.  If we are peeking
- * or poking an address that happens to reside in the kernel-backing
- * store of another thread, we need to attach to that thread, because
- * otherwise we end up accessing stale data.
- *
- * task_list_lock must be read-locked before calling this routine!
- */
-static struct task_struct *
-find_thread_for_addr (struct task_struct *child, unsigned long addr)
-{
-	struct task_struct *p;
-	struct mm_struct *mm;
-	struct list_head *this, *next;
-	int mm_users;
-
-	if (!(mm = get_task_mm(child)))
-		return child;
-
-	/* -1 because of our get_task_mm(): */
-	mm_users = atomic_read(&mm->mm_users) - 1;
-	if (mm_users <= 1)
-		goto out;		/* not multi-threaded */
-
-	/*
-	 * Traverse the current process' children list.  Every task that
-	 * one attaches to becomes a child.  And it is only attached children
-	 * of the debugger that are of interest (ptrace_check_attach checks
-	 * for this).
-	 */
- 	list_for_each_safe(this, next, &current->children) {
-		p = list_entry(this, struct task_struct, sibling);
-		if (p->tgid != child->tgid)
-			continue;
-		if (thread_matches(p, addr)) {
-			child = p;
-			goto out;
-		}
-	}
-
-  out:
-	mmput(mm);
-	return child;
-}
-
-/*
  * Write f32-f127 back to task->thread.fph if it has been modified.
  */
 inline void
@@ -786,25 +745,6 @@ ia64_sync_fph (struct task_struct *task)
 	psr->dfh = 1;
 }
 
-static int
-access_fr (struct unw_frame_info *info, int regnum, int hi,
-	   unsigned long *data, int write_access)
-{
-	struct ia64_fpreg fpval;
-	int ret;
-
-	ret = unw_get_fr(info, regnum, &fpval);
-	if (ret < 0)
-		return ret;
-
-	if (write_access) {
-		fpval.u.bits[hi] = *data;
-		ret = unw_set_fr(info, regnum, fpval);
-	} else
-		*data = fpval.u.bits[hi];
-	return ret;
-}
-
 /*
  * Change the machine-state of CHILD such that it will return via the normal
  * kernel exit-path, rather than the syscall-exit path.
@@ -826,14 +766,14 @@ convert_to_non_syscall (struct task_struct *child, struct pt_regs  *pt,
 		if ((long)((unsigned long)child + IA64_STK_OFFSET - sp)
 		    < IA64_PT_REGS_SIZE) {
 			dprintk("ptrace.%s: ran off the top of the kernel "
-				"stack\n", __FUNCTION__);
+				"stack\n", __func__);
 			return;
 		}
 		if (unw_get_pr (&prev_info, &pr) < 0) {
 			unw_get_rp(&prev_info, &ip);
 			dprintk("ptrace.%s: failed to read "
 				"predicate register (ip=0x%lx)\n",
-				__FUNCTION__, ip);
+				__func__, ip);
 			return;
 		}
 		if (unw_is_intr_frame(&info)
@@ -906,330 +846,7 @@ access_nat_bits (struct task_struct *child, struct pt_regs *pt,
 
 static int
 access_uarea (struct task_struct *child, unsigned long addr,
-	      unsigned long *data, int write_access)
-{
-	unsigned long *ptr, regnum, urbs_end, rnat_addr, cfm;
-	struct switch_stack *sw;
-	struct pt_regs *pt;
-#	define pt_reg_addr(pt, reg)	((void *)			    \
-					 ((unsigned long) (pt)		    \
-					  + offsetof(struct pt_regs, reg)))
-
-
-	pt = task_pt_regs(child);
-	sw = (struct switch_stack *) (child->thread.ksp + 16);
-
-	if ((addr & 0x7) != 0) {
-		dprintk("ptrace: unaligned register address 0x%lx\n", addr);
-		return -1;
-	}
-
-	if (addr < PT_F127 + 16) {
-		/* accessing fph */
-		if (write_access)
-			ia64_sync_fph(child);
-		else
-			ia64_flush_fph(child);
-		ptr = (unsigned long *)
-			((unsigned long) &child->thread.fph + addr);
-	} else if ((addr >= PT_F10) && (addr < PT_F11 + 16)) {
-		/* scratch registers untouched by kernel (saved in pt_regs) */
-		ptr = pt_reg_addr(pt, f10) + (addr - PT_F10);
-	} else if (addr >= PT_F12 && addr < PT_F15 + 16) {
-		/*
-		 * Scratch registers untouched by kernel (saved in
-		 * switch_stack).
-		 */
-		ptr = (unsigned long *) ((long) sw
-					 + (addr - PT_NAT_BITS - 32));
-	} else if (addr < PT_AR_LC + 8) {
-		/* preserved state: */
-		struct unw_frame_info info;
-		char nat = 0;
-		int ret;
-
-		unw_init_from_blocked_task(&info, child);
-		if (unw_unwind_to_user(&info) < 0)
-			return -1;
-
-		switch (addr) {
-		      case PT_NAT_BITS:
-			return access_nat_bits(child, pt, &info,
-					       data, write_access);
-
-		      case PT_R4: case PT_R5: case PT_R6: case PT_R7:
-			if (write_access) {
-				/* read NaT bit first: */
-				unsigned long dummy;
-
-				ret = unw_get_gr(&info, (addr - PT_R4)/8 + 4,
-						 &dummy, &nat);
-				if (ret < 0)
-					return ret;
-			}
-			return unw_access_gr(&info, (addr - PT_R4)/8 + 4, data,
-					     &nat, write_access);
-
-		      case PT_B1: case PT_B2: case PT_B3:
-		      case PT_B4: case PT_B5:
-			return unw_access_br(&info, (addr - PT_B1)/8 + 1, data,
-					     write_access);
-
-		      case PT_AR_EC:
-			return unw_access_ar(&info, UNW_AR_EC, data,
-					     write_access);
-
-		      case PT_AR_LC:
-			return unw_access_ar(&info, UNW_AR_LC, data,
-					     write_access);
-
-		      default:
-			if (addr >= PT_F2 && addr < PT_F5 + 16)
-				return access_fr(&info, (addr - PT_F2)/16 + 2,
-						 (addr & 8) != 0, data,
-						 write_access);
-			else if (addr >= PT_F16 && addr < PT_F31 + 16)
-				return access_fr(&info,
-						 (addr - PT_F16)/16 + 16,
-						 (addr & 8) != 0,
-						 data, write_access);
-			else {
-				dprintk("ptrace: rejecting access to register "
-					"address 0x%lx\n", addr);
-				return -1;
-			}
-		}
-	} else if (addr < PT_F9+16) {
-		/* scratch state */
-		switch (addr) {
-		      case PT_AR_BSP:
-			/*
-			 * By convention, we use PT_AR_BSP to refer to
-			 * the end of the user-level backing store.
-			 * Use ia64_rse_skip_regs(PT_AR_BSP, -CFM.sof)
-			 * to get the real value of ar.bsp at the time
-			 * the kernel was entered.
-			 *
-			 * Furthermore, when changing the contents of
-			 * PT_AR_BSP (or PT_CFM) we MUST copy any
-			 * users-level stacked registers that are
-			 * stored on the kernel stack back to
-			 * user-space because otherwise, we might end
-			 * up clobbering kernel stacked registers.
-			 * Also, if this happens while the task is
-			 * blocked in a system call, which convert the
-			 * state such that the non-system-call exit
-			 * path is used.  This ensures that the proper
-			 * state will be picked up when resuming
-			 * execution.  However, it *also* means that
-			 * once we write PT_AR_BSP/PT_CFM, it won't be
-			 * possible to modify the syscall arguments of
-			 * the pending system call any longer.  This
-			 * shouldn't be an issue because modifying
-			 * PT_AR_BSP/PT_CFM generally implies that
-			 * we're either abandoning the pending system
-			 * call or that we defer it's re-execution
-			 * (e.g., due to GDB doing an inferior
-			 * function call).
-			 */
-			urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
-			if (write_access) {
-				if (*data != urbs_end) {
-					if (ia64_sync_user_rbs(child, sw,
-							       pt->ar_bspstore,
-							       urbs_end) < 0)
-						return -1;
-					if (in_syscall(pt))
-						convert_to_non_syscall(child,
-								       pt,
-								       cfm);
-					/*
-					 * Simulate user-level write
-					 * of ar.bsp:
-					 */
-					pt->loadrs = 0;
-					pt->ar_bspstore = *data;
-				}
-			} else
-				*data = urbs_end;
-			return 0;
-
-		      case PT_CFM:
-			urbs_end = ia64_get_user_rbs_end(child, pt, &cfm);
-			if (write_access) {
-				if (((cfm ^ *data) & PFM_MASK) != 0) {
-					if (ia64_sync_user_rbs(child, sw,
-							       pt->ar_bspstore,
-							       urbs_end) < 0)
-						return -1;
-					if (in_syscall(pt))
-						convert_to_non_syscall(child,
-								       pt,
-								       cfm);
-					pt->cr_ifs = ((pt->cr_ifs & ~PFM_MASK)
-						      | (*data & PFM_MASK));
-				}
-			} else
-				*data = cfm;
-			return 0;
-
-		      case PT_CR_IPSR:
-			if (write_access) {
-				unsigned long tmp = *data;
-				/* psr.ri==3 is a reserved value: SDM 2:25 */
-				if ((tmp & IA64_PSR_RI) == IA64_PSR_RI)
-					tmp &= ~IA64_PSR_RI;
-				pt->cr_ipsr = ((tmp & IPSR_MASK)
-					       | (pt->cr_ipsr & ~IPSR_MASK));
-			} else
-				*data = (pt->cr_ipsr & IPSR_MASK);
-			return 0;
-
-		      case PT_AR_RSC:
-			if (write_access)
-				pt->ar_rsc = *data | (3 << 2); /* force PL3 */
-			else
-				*data = pt->ar_rsc;
-			return 0;
-
-		      case PT_AR_RNAT:
-			urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
-			rnat_addr = (long) ia64_rse_rnat_addr((long *)
-							      urbs_end);
-			if (write_access)
-				return ia64_poke(child, sw, urbs_end,
-						 rnat_addr, *data);
-			else
-				return ia64_peek(child, sw, urbs_end,
-						 rnat_addr, data);
-
-		      case PT_R1:
-			ptr = pt_reg_addr(pt, r1);
-			break;
-		      case PT_R2:  case PT_R3:
-			ptr = pt_reg_addr(pt, r2) + (addr - PT_R2);
-			break;
-		      case PT_R8:  case PT_R9:  case PT_R10: case PT_R11:
-			ptr = pt_reg_addr(pt, r8) + (addr - PT_R8);
-			break;
-		      case PT_R12: case PT_R13:
-			ptr = pt_reg_addr(pt, r12) + (addr - PT_R12);
-			break;
-		      case PT_R14:
-			ptr = pt_reg_addr(pt, r14);
-			break;
-		      case PT_R15:
-			ptr = pt_reg_addr(pt, r15);
-			break;
-		      case PT_R16: case PT_R17: case PT_R18: case PT_R19:
-		      case PT_R20: case PT_R21: case PT_R22: case PT_R23:
-		      case PT_R24: case PT_R25: case PT_R26: case PT_R27:
-		      case PT_R28: case PT_R29: case PT_R30: case PT_R31:
-			ptr = pt_reg_addr(pt, r16) + (addr - PT_R16);
-			break;
-		      case PT_B0:
-			ptr = pt_reg_addr(pt, b0);
-			break;
-		      case PT_B6:
-			ptr = pt_reg_addr(pt, b6);
-			break;
-		      case PT_B7:
-			ptr = pt_reg_addr(pt, b7);
-			break;
-		      case PT_F6:  case PT_F6+8: case PT_F7: case PT_F7+8:
-		      case PT_F8:  case PT_F8+8: case PT_F9: case PT_F9+8:
-			ptr = pt_reg_addr(pt, f6) + (addr - PT_F6);
-			break;
-		      case PT_AR_BSPSTORE:
-			ptr = pt_reg_addr(pt, ar_bspstore);
-			break;
-		      case PT_AR_UNAT:
-			ptr = pt_reg_addr(pt, ar_unat);
-			break;
-		      case PT_AR_PFS:
-			ptr = pt_reg_addr(pt, ar_pfs);
-			break;
-		      case PT_AR_CCV:
-			ptr = pt_reg_addr(pt, ar_ccv);
-			break;
-		      case PT_AR_FPSR:
-			ptr = pt_reg_addr(pt, ar_fpsr);
-			break;
-		      case PT_CR_IIP:
-			ptr = pt_reg_addr(pt, cr_iip);
-			break;
-		      case PT_PR:
-			ptr = pt_reg_addr(pt, pr);
-			break;
-			/* scratch register */
-
-		      default:
-			/* disallow accessing anything else... */
-			dprintk("ptrace: rejecting access to register "
-				"address 0x%lx\n", addr);
-			return -1;
-		}
-	} else if (addr <= PT_AR_SSD) {
-		ptr = pt_reg_addr(pt, ar_csd) + (addr - PT_AR_CSD);
-	} else {
-		/* access debug registers */
-
-		if (addr >= PT_IBR) {
-			regnum = (addr - PT_IBR) >> 3;
-			ptr = &child->thread.ibr[0];
-		} else {
-			regnum = (addr - PT_DBR) >> 3;
-			ptr = &child->thread.dbr[0];
-		}
-
-		if (regnum >= 8) {
-			dprintk("ptrace: rejecting access to register "
-				"address 0x%lx\n", addr);
-			return -1;
-		}
-#ifdef CONFIG_PERFMON
-		/*
-		 * Check if debug registers are used by perfmon. This
-		 * test must be done once we know that we can do the
-		 * operation, i.e. the arguments are all valid, but
-		 * before we start modifying the state.
-		 *
-		 * Perfmon needs to keep a count of how many processes
-		 * are trying to modify the debug registers for system
-		 * wide monitoring sessions.
-		 *
-		 * We also include read access here, because they may
-		 * cause the PMU-installed debug register state
-		 * (dbr[], ibr[]) to be reset. The two arrays are also
-		 * used by perfmon, but we do not use
-		 * IA64_THREAD_DBG_VALID. The registers are restored
-		 * by the PMU context switch code.
-		 */
-		if (pfm_use_debug_registers(child)) return -1;
-#endif
-
-		if (!(child->thread.flags & IA64_THREAD_DBG_VALID)) {
-			child->thread.flags |= IA64_THREAD_DBG_VALID;
-			memset(child->thread.dbr, 0,
-			       sizeof(child->thread.dbr));
-			memset(child->thread.ibr, 0,
-			       sizeof(child->thread.ibr));
-		}
-
-		ptr += regnum;
-
-		if ((regnum & 1) && write_access) {
-			/* don't let the user set kernel-level breakpoints: */
-			*ptr = *data & ~(7UL << 56);
-			return 0;
-		}
-	}
-	if (write_access)
-		*ptr = *data;
-	else
-		*data = *ptr;
-	return 0;
-}
+	      unsigned long *data, int write_access);
 
 static long
 ptrace_getregs (struct task_struct *child, struct pt_all_user_regs __user *ppr)
@@ -1521,215 +1138,97 @@ ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user *ppr)
 	return ret;
 }
 
-/*
- * Called by kernel/ptrace.c when detaching..
- *
- * Make sure the single step bit is not set.
- */
 void
-ptrace_disable (struct task_struct *child)
+user_enable_single_step (struct task_struct *child)
 {
 	struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
 
-	/* make sure the single step/taken-branch trap bits are not set: */
-	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-	child_psr->ss = 0;
-	child_psr->tb = 0;
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+	child_psr->ss = 1;
 }
 
-asmlinkage long
-sys_ptrace (long request, pid_t pid, unsigned long addr, unsigned long data)
+void
+user_enable_block_step (struct task_struct *child)
 {
-	struct pt_regs *pt;
-	unsigned long urbs_end, peek_or_poke;
-	struct task_struct *child;
-	struct switch_stack *sw;
-	long ret;
-	struct unw_frame_info info;
+	struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
 
-	lock_kernel();
-	ret = -EPERM;
-	if (request == PTRACE_TRACEME) {
-		ret = ptrace_traceme();
-		goto out;
-	}
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+	child_psr->tb = 1;
+}
 
-	peek_or_poke = (request == PTRACE_PEEKTEXT
-			|| request == PTRACE_PEEKDATA
-			|| request == PTRACE_POKETEXT
-			|| request == PTRACE_POKEDATA);
-	ret = -ESRCH;
-	read_lock(&tasklist_lock);
-	{
-		child = find_task_by_pid(pid);
-		if (child) {
-			if (peek_or_poke)
-				child = find_thread_for_addr(child, addr);
-			get_task_struct(child);
-		}
-	}
-	read_unlock(&tasklist_lock);
-	if (!child)
-		goto out;
-	ret = -EPERM;
-	if (pid == 1)		/* no messing around with init! */
-		goto out_tsk;
-
-	if (request == PTRACE_ATTACH) {
-		ret = ptrace_attach(child);
-		if (!ret)
-			arch_ptrace_attach(child);
-		goto out_tsk;
-	}
+void
+user_disable_single_step (struct task_struct *child)
+{
+	struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
 
-	ret = ptrace_check_attach(child, request == PTRACE_KILL);
-	if (ret < 0)
-		goto out_tsk;
+	/* make sure the single step/taken-branch trap bits are not set: */
+	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
+	child_psr->ss = 0;
+	child_psr->tb = 0;
+}
 
-	pt = task_pt_regs(child);
-	sw = (struct switch_stack *) (child->thread.ksp + 16);
+/*
+ * Called by kernel/ptrace.c when detaching..
+ *
+ * Make sure the single step bit is not set.
+ */
+void
+ptrace_disable (struct task_struct *child)
+{
+	user_disable_single_step(child);
+}
 
+long
+arch_ptrace (struct task_struct *child, long request, long addr, long data)
+{
 	switch (request) {
-	      case PTRACE_PEEKTEXT:
-	      case PTRACE_PEEKDATA:
+	case PTRACE_PEEKTEXT:
+	case PTRACE_PEEKDATA:
 		/* read word at location addr */
-		urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
-		ret = ia64_peek(child, sw, urbs_end, addr, &data);
-		if (ret == 0) {
-			ret = data;
-			/* ensure "ret" is not mistaken as an error code: */
-			force_successful_syscall_return();
-		}
-		goto out_tsk;
-
-	      case PTRACE_POKETEXT:
-	      case PTRACE_POKEDATA:
-		/* write the word at location addr */
-		urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
-		ret = ia64_poke(child, sw, urbs_end, addr, data);
-
-		/* Make sure user RBS has the latest data */
-		unw_init_from_blocked_task(&info, child);
-		do_sync_rbs(&info, ia64_sync_user_rbs);
+		if (access_process_vm(child, addr, &data, sizeof(data), 0)
+		    != sizeof(data))
+			return -EIO;
+		/* ensure return value is not mistaken for error code */
+		force_successful_syscall_return();
+		return data;
 
-		goto out_tsk;
+	/* PTRACE_POKETEXT and PTRACE_POKEDATA is handled
+	 * by the generic ptrace_request().
+	 */
 
-	      case PTRACE_PEEKUSR:
+	case PTRACE_PEEKUSR:
 		/* read the word at addr in the USER area */
-		if (access_uarea(child, addr, &data, 0) < 0) {
-			ret = -EIO;
-			goto out_tsk;
-		}
-		ret = data;
-		/* ensure "ret" is not mistaken as an error code */
+		if (access_uarea(child, addr, &data, 0) < 0)
+			return -EIO;
+		/* ensure return value is not mistaken for error code */
 		force_successful_syscall_return();
-		goto out_tsk;
+		return data;
 
-	      case PTRACE_POKEUSR:
+	case PTRACE_POKEUSR:
 		/* write the word at addr in the USER area */
-		if (access_uarea(child, addr, &data, 1) < 0) {
-			ret = -EIO;
-			goto out_tsk;
-		}
-		ret = 0;
-		goto out_tsk;
+		if (access_uarea(child, addr, &data, 1) < 0)
+			return -EIO;
+		return 0;
 
-	      case PTRACE_OLD_GETSIGINFO:
+	case PTRACE_OLD_GETSIGINFO:
 		/* for backwards-compatibility */
-		ret = ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
-		goto out_tsk;
+		return ptrace_request(child, PTRACE_GETSIGINFO, addr, data);
 
-	      case PTRACE_OLD_SETSIGINFO:
+	case PTRACE_OLD_SETSIGINFO:
 		/* for backwards-compatibility */
-		ret = ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
-		goto out_tsk;
-
-	      case PTRACE_SYSCALL:
-		/* continue and stop at next (return from) syscall */
-	      case PTRACE_CONT:
-		/* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			goto out_tsk;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
+		return ptrace_request(child, PTRACE_SETSIGINFO, addr, data);
 
-		/*
-		 * Make sure the single step/taken-branch trap bits
-		 * are not set:
-		 */
-		clear_tsk_thread_flag(child, TIF_SINGLESTEP);
-		ia64_psr(pt)->ss = 0;
-		ia64_psr(pt)->tb = 0;
+	case PTRACE_GETREGS:
+		return ptrace_getregs(child,
+				      (struct pt_all_user_regs __user *) data);
 
-		wake_up_process(child);
-		ret = 0;
-		goto out_tsk;
+	case PTRACE_SETREGS:
+		return ptrace_setregs(child,
+				      (struct pt_all_user_regs __user *) data);
 
-	      case PTRACE_KILL:
-		/*
-		 * Make the child exit.  Best I can do is send it a
-		 * sigkill.  Perhaps it should be put in the status
-		 * that it wants to exit.
-		 */
-		if (child->exit_state == EXIT_ZOMBIE)
-			/* already dead */
-			goto out_tsk;
-		child->exit_code = SIGKILL;
-
-		ptrace_disable(child);
-		wake_up_process(child);
-		ret = 0;
-		goto out_tsk;
-
-	      case PTRACE_SINGLESTEP:
-		/* let child execute for one instruction */
-	      case PTRACE_SINGLEBLOCK:
-		ret = -EIO;
-		if (!valid_signal(data))
-			goto out_tsk;
-
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		set_tsk_thread_flag(child, TIF_SINGLESTEP);
-		if (request == PTRACE_SINGLESTEP) {
-			ia64_psr(pt)->ss = 1;
-		} else {
-			ia64_psr(pt)->tb = 1;
-		}
-		child->exit_code = data;
-
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		goto out_tsk;
-
-	      case PTRACE_DETACH:
-		/* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		goto out_tsk;
-
-	      case PTRACE_GETREGS:
-		ret = ptrace_getregs(child,
-				     (struct pt_all_user_regs __user *) data);
-		goto out_tsk;
-
-	      case PTRACE_SETREGS:
-		ret = ptrace_setregs(child,
-				     (struct pt_all_user_regs __user *) data);
-		goto out_tsk;
-
-	      default:
-		ret = ptrace_request(child, request, addr, data);
-		goto out_tsk;
+	default:
+		return ptrace_request(child, request, addr, data);
 	}
-  out_tsk:
-	put_task_struct(child);
-  out:
-	unlock_kernel();
-	return ret;
 }
 
 
@@ -1811,3 +1310,892 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3,
 	if (test_thread_flag(TIF_RESTORE_RSE))
 		ia64_sync_krbs();
 }
+
+/* Utrace implementation starts here */
+struct regset_get {
+	void *kbuf;
+	void __user *ubuf;
+};
+
+struct regset_set {
+	const void *kbuf;
+	const void __user *ubuf;
+};
+
+struct regset_getset {
+	struct task_struct *target;
+	const struct user_regset *regset;
+	union {
+		struct regset_get get;
+		struct regset_set set;
+	} u;
+	unsigned int pos;
+	unsigned int count;
+	int ret;
+};
+
+static int
+access_elf_gpreg(struct task_struct *target, struct unw_frame_info *info,
+		unsigned long addr, unsigned long *data, int write_access)
+{
+	struct pt_regs *pt;
+	unsigned long *ptr = NULL;
+	int ret;
+	char nat = 0;
+
+	pt = task_pt_regs(target);
+	switch (addr) {
+	case ELF_GR_OFFSET(1):
+		ptr = &pt->r1;
+		break;
+	case ELF_GR_OFFSET(2):
+	case ELF_GR_OFFSET(3):
+		ptr = (void *)&pt->r2 + (addr - ELF_GR_OFFSET(2));
+		break;
+	case ELF_GR_OFFSET(4) ... ELF_GR_OFFSET(7):
+		if (write_access) {
+			/* read NaT bit first: */
+			unsigned long dummy;
+
+			ret = unw_get_gr(info, addr/8, &dummy, &nat);
+			if (ret < 0)
+				return ret;
+		}
+		return unw_access_gr(info, addr/8, data, &nat, write_access);
+	case ELF_GR_OFFSET(8) ... ELF_GR_OFFSET(11):
+		ptr = (void *)&pt->r8 + addr - ELF_GR_OFFSET(8);
+		break;
+	case ELF_GR_OFFSET(12):
+	case ELF_GR_OFFSET(13):
+		ptr = (void *)&pt->r12 + addr - ELF_GR_OFFSET(12);
+		break;
+	case ELF_GR_OFFSET(14):
+		ptr = &pt->r14;
+		break;
+	case ELF_GR_OFFSET(15):
+		ptr = &pt->r15;
+	}
+	if (write_access)
+		*ptr = *data;
+	else
+		*data = *ptr;
+	return 0;
+}
+
+static int
+access_elf_breg(struct task_struct *target, struct unw_frame_info *info,
+		unsigned long addr, unsigned long *data, int write_access)
+{
+	struct pt_regs *pt;
+	unsigned long *ptr = NULL;
+
+	pt = task_pt_regs(target);
+	switch (addr) {
+	case ELF_BR_OFFSET(0):
+		ptr = &pt->b0;
+		break;
+	case ELF_BR_OFFSET(1) ... ELF_BR_OFFSET(5):
+		return unw_access_br(info, (addr - ELF_BR_OFFSET(0))/8,
+				     data, write_access);
+	case ELF_BR_OFFSET(6):
+		ptr = &pt->b6;
+		break;
+	case ELF_BR_OFFSET(7):
+		ptr = &pt->b7;
+	}
+	if (write_access)
+		*ptr = *data;
+	else
+		*data = *ptr;
+	return 0;
+}
+
+static int
+access_elf_areg(struct task_struct *target, struct unw_frame_info *info,
+		unsigned long addr, unsigned long *data, int write_access)
+{
+	struct pt_regs *pt;
+	unsigned long cfm, urbs_end;
+	unsigned long *ptr = NULL;
+
+	pt = task_pt_regs(target);
+	if (addr >= ELF_AR_RSC_OFFSET && addr <= ELF_AR_SSD_OFFSET) {
+		switch (addr) {
+		case ELF_AR_RSC_OFFSET:
+			/* force PL3 */
+			if (write_access)
+				pt->ar_rsc = *data | (3 << 2);
+			else
+				*data = pt->ar_rsc;
+			return 0;
+		case ELF_AR_BSP_OFFSET:
+			/*
+			 * By convention, we use PT_AR_BSP to refer to
+			 * the end of the user-level backing store.
+			 * Use ia64_rse_skip_regs(PT_AR_BSP, -CFM.sof)
+			 * to get the real value of ar.bsp at the time
+			 * the kernel was entered.
+			 *
+			 * Furthermore, when changing the contents of
+			 * PT_AR_BSP (or PT_CFM) while the task is
+			 * blocked in a system call, convert the state
+			 * so that the non-system-call exit
+			 * path is used.  This ensures that the proper
+			 * state will be picked up when resuming
+			 * execution.  However, it *also* means that
+			 * once we write PT_AR_BSP/PT_CFM, it won't be
+			 * possible to modify the syscall arguments of
+			 * the pending system call any longer.  This
+			 * shouldn't be an issue because modifying
+			 * PT_AR_BSP/PT_CFM generally implies that
+			 * we're either abandoning the pending system
+			 * call or that we defer it's re-execution
+			 * (e.g., due to GDB doing an inferior
+			 * function call).
+			 */
+			urbs_end = ia64_get_user_rbs_end(target, pt, &cfm);
+			if (write_access) {
+				if (*data != urbs_end) {
+					if (in_syscall(pt))
+						convert_to_non_syscall(target,
+								       pt,
+								       cfm);
+					/*
+					 * Simulate user-level write
+					 * of ar.bsp:
+					 */
+					pt->loadrs = 0;
+					pt->ar_bspstore = *data;
+				}
+			} else
+				*data = urbs_end;
+			return 0;
+		case ELF_AR_BSPSTORE_OFFSET:
+			ptr = &pt->ar_bspstore;
+			break;
+		case ELF_AR_RNAT_OFFSET:
+			ptr = &pt->ar_rnat;
+			break;
+		case ELF_AR_CCV_OFFSET:
+			ptr = &pt->ar_ccv;
+			break;
+		case ELF_AR_UNAT_OFFSET:
+			ptr = &pt->ar_unat;
+			break;
+		case ELF_AR_FPSR_OFFSET:
+			ptr = &pt->ar_fpsr;
+			break;
+		case ELF_AR_PFS_OFFSET:
+			ptr = &pt->ar_pfs;
+			break;
+		case ELF_AR_LC_OFFSET:
+			return unw_access_ar(info, UNW_AR_LC, data,
+					     write_access);
+		case ELF_AR_EC_OFFSET:
+			return unw_access_ar(info, UNW_AR_EC, data,
+					     write_access);
+		case ELF_AR_CSD_OFFSET:
+			ptr = &pt->ar_csd;
+			break;
+		case ELF_AR_SSD_OFFSET:
+			ptr = &pt->ar_ssd;
+		}
+	} else if (addr >= ELF_CR_IIP_OFFSET && addr <= ELF_CR_IPSR_OFFSET) {
+		switch (addr) {
+		case ELF_CR_IIP_OFFSET:
+			ptr = &pt->cr_iip;
+			break;
+		case ELF_CFM_OFFSET:
+			urbs_end = ia64_get_user_rbs_end(target, pt, &cfm);
+			if (write_access) {
+				if (((cfm ^ *data) & PFM_MASK) != 0) {
+					if (in_syscall(pt))
+						convert_to_non_syscall(target,
+								       pt,
+								       cfm);
+					pt->cr_ifs = ((pt->cr_ifs & ~PFM_MASK)
+						      | (*data & PFM_MASK));
+				}
+			} else
+				*data = cfm;
+			return 0;
+		case ELF_CR_IPSR_OFFSET:
+			if (write_access) {
+				unsigned long tmp = *data;
+				/* psr.ri==3 is a reserved value: SDM 2:25 */
+				if ((tmp & IA64_PSR_RI) == IA64_PSR_RI)
+					tmp &= ~IA64_PSR_RI;
+				pt->cr_ipsr = ((tmp & IPSR_MASK)
+					       | (pt->cr_ipsr & ~IPSR_MASK));
+			} else
+				*data = (pt->cr_ipsr & IPSR_MASK);
+			return 0;
+		}
+	} else if (addr == ELF_NAT_OFFSET)
+		return access_nat_bits(target, pt, info,
+				       data, write_access);
+	else if (addr == ELF_PR_OFFSET)
+		ptr = &pt->pr;
+	else
+		return -1;
+
+	if (write_access)
+		*ptr = *data;
+	else
+		*data = *ptr;
+
+	return 0;
+}
+
+static int
+access_elf_reg(struct task_struct *target, struct unw_frame_info *info,
+		unsigned long addr, unsigned long *data, int write_access)
+{
+	if (addr >= ELF_GR_OFFSET(1) && addr <= ELF_GR_OFFSET(15))
+		return access_elf_gpreg(target, info, addr, data, write_access);
+	else if (addr >= ELF_BR_OFFSET(0) && addr <= ELF_BR_OFFSET(7))
+		return access_elf_breg(target, info, addr, data, write_access);
+	else
+		return access_elf_areg(target, info, addr, data, write_access);
+}
+
+void do_gpregs_get(struct unw_frame_info *info, void *arg)
+{
+	struct pt_regs *pt;
+	struct regset_getset *dst = arg;
+	elf_greg_t tmp[16];
+	unsigned int i, index, min_copy;
+
+	if (unw_unwind_to_user(info) < 0)
+		return;
+
+	/*
+	 * coredump format:
+	 *      r0-r31
+	 *      NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+	 *      predicate registers (p0-p63)
+	 *      b0-b7
+	 *      ip cfm user-mask
+	 *      ar.rsc ar.bsp ar.bspstore ar.rnat
+	 *      ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec
+	 */
+
+
+	/* Skip r0 */
+	if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(1)) {
+		dst->ret = user_regset_copyout_zero(&dst->pos, &dst->count,
+						      &dst->u.get.kbuf,
+						      &dst->u.get.ubuf,
+						      0, ELF_GR_OFFSET(1));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* gr1 - gr15 */
+	if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(16)) {
+		index = (dst->pos - ELF_GR_OFFSET(1)) / sizeof(elf_greg_t);
+		min_copy = ELF_GR_OFFSET(16) > (dst->pos + dst->count) ?
+			 (dst->pos + dst->count) : ELF_GR_OFFSET(16);
+		for (i = dst->pos; i < min_copy; i += sizeof(elf_greg_t),
+				index++)
+			if (access_elf_reg(dst->target, info, i,
+						&tmp[index], 0) < 0) {
+				dst->ret = -EIO;
+				return;
+			}
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+				ELF_GR_OFFSET(1), ELF_GR_OFFSET(16));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* r16-r31 */
+	if (dst->count > 0 && dst->pos < ELF_NAT_OFFSET) {
+		pt = task_pt_regs(dst->target);
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, &pt->r16,
+				ELF_GR_OFFSET(16), ELF_NAT_OFFSET);
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* nat, pr, b0 - b7 */
+	if (dst->count > 0 && dst->pos < ELF_CR_IIP_OFFSET) {
+		index = (dst->pos - ELF_NAT_OFFSET) / sizeof(elf_greg_t);
+		min_copy = ELF_CR_IIP_OFFSET > (dst->pos + dst->count) ?
+			 (dst->pos + dst->count) : ELF_CR_IIP_OFFSET;
+		for (i = dst->pos; i < min_copy; i += sizeof(elf_greg_t),
+				index++)
+			if (access_elf_reg(dst->target, info, i,
+						&tmp[index], 0) < 0) {
+				dst->ret = -EIO;
+				return;
+			}
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+				ELF_NAT_OFFSET, ELF_CR_IIP_OFFSET);
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* ip cfm psr ar.rsc ar.bsp ar.bspstore ar.rnat
+	 * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+	 */
+	if (dst->count > 0 && dst->pos < (ELF_AR_END_OFFSET)) {
+		index = (dst->pos - ELF_CR_IIP_OFFSET) / sizeof(elf_greg_t);
+		min_copy = ELF_AR_END_OFFSET > (dst->pos + dst->count) ?
+			 (dst->pos + dst->count) : ELF_AR_END_OFFSET;
+		for (i = dst->pos; i < min_copy; i += sizeof(elf_greg_t),
+				index++)
+			if (access_elf_reg(dst->target, info, i,
+						&tmp[index], 0) < 0) {
+				dst->ret = -EIO;
+				return;
+			}
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+				ELF_CR_IIP_OFFSET, ELF_AR_END_OFFSET);
+	}
+}
+
+void do_gpregs_set(struct unw_frame_info *info, void *arg)
+{
+	struct pt_regs *pt;
+	struct regset_getset *dst = arg;
+	elf_greg_t tmp[16];
+	unsigned int i, index;
+
+	if (unw_unwind_to_user(info) < 0)
+		return;
+
+	/* Skip r0 */
+	if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(1)) {
+		dst->ret = user_regset_copyin_ignore(&dst->pos, &dst->count,
+						       &dst->u.set.kbuf,
+						       &dst->u.set.ubuf,
+						       0, ELF_GR_OFFSET(1));
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* gr1-gr15 */
+	if (dst->count > 0 && dst->pos < ELF_GR_OFFSET(16)) {
+		i = dst->pos;
+		index = (dst->pos - ELF_GR_OFFSET(1)) / sizeof(elf_greg_t);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+				ELF_GR_OFFSET(1), ELF_GR_OFFSET(16));
+		if (dst->ret)
+			return;
+		for ( ; i < dst->pos; i += sizeof(elf_greg_t), index++)
+			if (access_elf_reg(dst->target, info, i,
+						&tmp[index], 1) < 0) {
+				dst->ret = -EIO;
+				return;
+			}
+		if (dst->count == 0)
+			return;
+	}
+
+	/* gr16-gr31 */
+	if (dst->count > 0 && dst->pos < ELF_NAT_OFFSET) {
+		pt = task_pt_regs(dst->target);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf, &pt->r16,
+				ELF_GR_OFFSET(16), ELF_NAT_OFFSET);
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* nat, pr, b0 - b7 */
+	if (dst->count > 0 && dst->pos < ELF_CR_IIP_OFFSET) {
+		i = dst->pos;
+		index = (dst->pos - ELF_NAT_OFFSET) / sizeof(elf_greg_t);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+				ELF_NAT_OFFSET, ELF_CR_IIP_OFFSET);
+		if (dst->ret)
+			return;
+		for (; i < dst->pos; i += sizeof(elf_greg_t), index++)
+			if (access_elf_reg(dst->target, info, i,
+						&tmp[index], 1) < 0) {
+				dst->ret = -EIO;
+				return;
+			}
+		if (dst->count == 0)
+			return;
+	}
+
+	/* ip cfm psr ar.rsc ar.bsp ar.bspstore ar.rnat
+	 * ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+	 */
+	if (dst->count > 0 && dst->pos < (ELF_AR_END_OFFSET)) {
+		i = dst->pos;
+		index = (dst->pos - ELF_CR_IIP_OFFSET) / sizeof(elf_greg_t);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+				ELF_CR_IIP_OFFSET, ELF_AR_END_OFFSET);
+		if (dst->ret)
+			return;
+		for ( ; i < dst->pos; i += sizeof(elf_greg_t), index++)
+			if (access_elf_reg(dst->target, info, i,
+						&tmp[index], 1) < 0) {
+				dst->ret = -EIO;
+				return;
+			}
+	}
+}
+
+#define ELF_FP_OFFSET(i)	(i * sizeof(elf_fpreg_t))
+
+void do_fpregs_get(struct unw_frame_info *info, void *arg)
+{
+	struct regset_getset *dst = arg;
+	struct task_struct *task = dst->target;
+	elf_fpreg_t tmp[30];
+	int index, min_copy, i;
+
+	if (unw_unwind_to_user(info) < 0)
+		return;
+
+	/* Skip pos 0 and 1 */
+	if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(2)) {
+		dst->ret = user_regset_copyout_zero(&dst->pos, &dst->count,
+						      &dst->u.get.kbuf,
+						      &dst->u.get.ubuf,
+						      0, ELF_FP_OFFSET(2));
+		if (dst->count == 0 || dst->ret)
+			return;
+	}
+
+	/* fr2-fr31 */
+	if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(32)) {
+		index = (dst->pos - ELF_FP_OFFSET(2)) / sizeof(elf_fpreg_t);
+
+		min_copy = min(((unsigned int)ELF_FP_OFFSET(32)),
+				dst->pos + dst->count);
+		for (i = dst->pos; i < min_copy; i += sizeof(elf_fpreg_t),
+				index++)
+			if (unw_get_fr(info, i / sizeof(elf_fpreg_t),
+					 &tmp[index])) {
+				dst->ret = -EIO;
+				return;
+			}
+		dst->ret = user_regset_copyout(&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf, tmp,
+				ELF_FP_OFFSET(2), ELF_FP_OFFSET(32));
+		if (dst->count == 0 || dst->ret)
+			return;
+	}
+
+	/* fph */
+	if (dst->count > 0) {
+		ia64_flush_fph(dst->target);
+		if (task->thread.flags & IA64_THREAD_FPH_VALID)
+			dst->ret = user_regset_copyout(
+				&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf,
+				&dst->target->thread.fph,
+				ELF_FP_OFFSET(32), -1);
+		else
+			/* Zero fill instead.  */
+			dst->ret = user_regset_copyout_zero(
+				&dst->pos, &dst->count,
+				&dst->u.get.kbuf, &dst->u.get.ubuf,
+				ELF_FP_OFFSET(32), -1);
+	}
+}
+
+void do_fpregs_set(struct unw_frame_info *info, void *arg)
+{
+	struct regset_getset *dst = arg;
+	elf_fpreg_t fpreg, tmp[30];
+	int index, start, end;
+
+	if (unw_unwind_to_user(info) < 0)
+		return;
+
+	/* Skip pos 0 and 1 */
+	if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(2)) {
+		dst->ret = user_regset_copyin_ignore(&dst->pos, &dst->count,
+						       &dst->u.set.kbuf,
+						       &dst->u.set.ubuf,
+						       0, ELF_FP_OFFSET(2));
+		if (dst->count == 0 || dst->ret)
+			return;
+	}
+
+	/* fr2-fr31 */
+	if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(32)) {
+		start = dst->pos;
+		end = min(((unsigned int)ELF_FP_OFFSET(32)),
+			 dst->pos + dst->count);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+				&dst->u.set.kbuf, &dst->u.set.ubuf, tmp,
+				ELF_FP_OFFSET(2), ELF_FP_OFFSET(32));
+		if (dst->ret)
+			return;
+
+		if (start & 0xF) { /* only write high part */
+			if (unw_get_fr(info, start / sizeof(elf_fpreg_t),
+					 &fpreg)) {
+				dst->ret = -EIO;
+				return;
+			}
+			tmp[start / sizeof(elf_fpreg_t) - 2].u.bits[0]
+				= fpreg.u.bits[0];
+			start &= ~0xFUL;
+		}
+		if (end & 0xF) { /* only write low part */
+			if (unw_get_fr(info, end / sizeof(elf_fpreg_t),
+					&fpreg)) {
+				dst->ret = -EIO;
+				return;
+			}
+			tmp[end / sizeof(elf_fpreg_t) - 2].u.bits[1]
+				= fpreg.u.bits[1];
+			end = (end + 0xF) & ~0xFUL;
+		}
+
+		for ( ;	start < end ; start += sizeof(elf_fpreg_t)) {
+			index = start / sizeof(elf_fpreg_t);
+			if (unw_set_fr(info, index, tmp[index - 2])) {
+				dst->ret = -EIO;
+				return;
+			}
+		}
+		if (dst->ret || dst->count == 0)
+			return;
+	}
+
+	/* fph */
+	if (dst->count > 0 && dst->pos < ELF_FP_OFFSET(128)) {
+		ia64_sync_fph(dst->target);
+		dst->ret = user_regset_copyin(&dst->pos, &dst->count,
+						&dst->u.set.kbuf,
+						&dst->u.set.ubuf,
+						&dst->target->thread.fph,
+						ELF_FP_OFFSET(32), -1);
+	}
+}
+
+static int
+do_regset_call(void (*call)(struct unw_frame_info *, void *),
+	       struct task_struct *target,
+	       const struct user_regset *regset,
+	       unsigned int pos, unsigned int count,
+	       const void *kbuf, const void __user *ubuf)
+{
+	struct regset_getset info = { .target = target, .regset = regset,
+				 .pos = pos, .count = count,
+				 .u.set = { .kbuf = kbuf, .ubuf = ubuf },
+				 .ret = 0 };
+
+	if (target == current)
+		unw_init_running(call, &info);
+	else {
+		struct unw_frame_info ufi;
+		memset(&ufi, 0, sizeof(ufi));
+		unw_init_from_blocked_task(&ufi, target);
+		(*call)(&ufi, &info);
+	}
+
+	return info.ret;
+}
+
+static int
+gpregs_get(struct task_struct *target,
+	   const struct user_regset *regset,
+	   unsigned int pos, unsigned int count,
+	   void *kbuf, void __user *ubuf)
+{
+	return do_regset_call(do_gpregs_get, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int gpregs_set(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	return do_regset_call(do_gpregs_set, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static void do_gpregs_writeback(struct unw_frame_info *info, void *arg)
+{
+	do_sync_rbs(info, ia64_sync_user_rbs);
+}
+
+/*
+ * This is called to write back the register backing store.
+ * ptrace does this before it stops, so that a tracer reading the user
+ * memory after the thread stops will get the current register data.
+ */
+static int
+gpregs_writeback(struct task_struct *target,
+		 const struct user_regset *regset,
+		 int now)
+{
+	if (test_and_set_tsk_thread_flag(target, TIF_RESTORE_RSE))
+		return 0;
+	tsk_set_notify_resume(target);
+	return do_regset_call(do_gpregs_writeback, target, regset, 0, 0,
+		NULL, NULL);
+}
+
+static int
+fpregs_active(struct task_struct *target, const struct user_regset *regset)
+{
+	return (target->thread.flags & IA64_THREAD_FPH_VALID) ? 128 : 32;
+}
+
+static int fpregs_get(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		void *kbuf, void __user *ubuf)
+{
+	return do_regset_call(do_fpregs_get, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int fpregs_set(struct task_struct *target,
+		const struct user_regset *regset,
+		unsigned int pos, unsigned int count,
+		const void *kbuf, const void __user *ubuf)
+{
+	return do_regset_call(do_fpregs_set, target, regset, pos, count,
+		kbuf, ubuf);
+}
+
+static int
+access_uarea(struct task_struct *child, unsigned long addr,
+	      unsigned long *data, int write_access)
+{
+	unsigned int pos = -1; /* an invalid value */
+	int ret;
+	unsigned long *ptr, regnum;
+
+	if ((addr & 0x7) != 0) {
+		dprintk("ptrace: unaligned register address 0x%lx\n", addr);
+		return -1;
+	}
+	if ((addr >= PT_NAT_BITS + 8 && addr < PT_F2) ||
+		(addr >= PT_R7 + 8 && addr < PT_B1) ||
+		(addr >= PT_AR_LC + 8 && addr < PT_CR_IPSR) ||
+		(addr >= PT_AR_SSD + 8 && addr < PT_DBR)) {
+		dprintk("ptrace: rejecting access to register "
+					"address 0x%lx\n", addr);
+		return -1;
+	}
+
+	switch (addr) {
+	case PT_F32 ... (PT_F127 + 15):
+		pos = addr - PT_F32 + ELF_FP_OFFSET(32);
+		break;
+	case PT_F2 ... (PT_F5 + 15):
+		pos = addr - PT_F2 + ELF_FP_OFFSET(2);
+		break;
+	case PT_F10 ... (PT_F31 + 15):
+		pos = addr - PT_F10 + ELF_FP_OFFSET(10);
+		break;
+	case PT_F6 ... (PT_F9 + 15):
+		pos = addr - PT_F6 + ELF_FP_OFFSET(6);
+		break;
+	}
+
+	if (pos != -1) {
+		if (write_access)
+			ret = fpregs_set(child, NULL, pos,
+				sizeof(unsigned long), data, NULL);
+		else
+			ret = fpregs_get(child, NULL, pos,
+				sizeof(unsigned long), data, NULL);
+		if (ret != 0)
+			return -1;
+		return 0;
+	}
+
+	switch (addr) {
+	case PT_NAT_BITS:
+		pos = ELF_NAT_OFFSET;
+		break;
+	case PT_R4 ... PT_R7:
+		pos = addr - PT_R4 + ELF_GR_OFFSET(4);
+		break;
+	case PT_B1 ... PT_B5:
+		pos = addr - PT_B1 + ELF_BR_OFFSET(1);
+		break;
+	case PT_AR_EC:
+		pos = ELF_AR_EC_OFFSET;
+		break;
+	case PT_AR_LC:
+		pos = ELF_AR_LC_OFFSET;
+		break;
+	case PT_CR_IPSR:
+		pos = ELF_CR_IPSR_OFFSET;
+		break;
+	case PT_CR_IIP:
+		pos = ELF_CR_IIP_OFFSET;
+		break;
+	case PT_CFM:
+		pos = ELF_CFM_OFFSET;
+		break;
+	case PT_AR_UNAT:
+		pos = ELF_AR_UNAT_OFFSET;
+		break;
+	case PT_AR_PFS:
+		pos = ELF_AR_PFS_OFFSET;
+		break;
+	case PT_AR_RSC:
+		pos = ELF_AR_RSC_OFFSET;
+		break;
+	case PT_AR_RNAT:
+		pos = ELF_AR_RNAT_OFFSET;
+		break;
+	case PT_AR_BSPSTORE:
+		pos = ELF_AR_BSPSTORE_OFFSET;
+		break;
+	case PT_PR:
+		pos = ELF_PR_OFFSET;
+		break;
+	case PT_B6:
+		pos = ELF_BR_OFFSET(6);
+		break;
+	case PT_AR_BSP:
+		pos = ELF_AR_BSP_OFFSET;
+		break;
+	case PT_R1 ... PT_R3:
+		pos = addr - PT_R1 + ELF_GR_OFFSET(1);
+		break;
+	case PT_R12 ... PT_R15:
+		pos = addr - PT_R12 + ELF_GR_OFFSET(12);
+		break;
+	case PT_R8 ... PT_R11:
+		pos = addr - PT_R8 + ELF_GR_OFFSET(8);
+		break;
+	case PT_R16 ... PT_R31:
+		pos = addr - PT_R16 + ELF_GR_OFFSET(16);
+		break;
+	case PT_AR_CCV:
+		pos = ELF_AR_CCV_OFFSET;
+		break;
+	case PT_AR_FPSR:
+		pos = ELF_AR_FPSR_OFFSET;
+		break;
+	case PT_B0:
+		pos = ELF_BR_OFFSET(0);
+		break;
+	case PT_B7:
+		pos = ELF_BR_OFFSET(7);
+		break;
+	case PT_AR_CSD:
+		pos = ELF_AR_CSD_OFFSET;
+		break;
+	case PT_AR_SSD:
+		pos = ELF_AR_SSD_OFFSET;
+		break;
+	}
+
+	if (pos != -1) {
+		if (write_access)
+			ret = gpregs_set(child, NULL, pos,
+				sizeof(unsigned long), data, NULL);
+		else
+			ret = gpregs_get(child, NULL, pos,
+				sizeof(unsigned long), data, NULL);
+		if (ret != 0)
+			return -1;
+		return 0;
+	}
+
+	/* access debug registers */
+	if (addr >= PT_IBR) {
+		regnum = (addr - PT_IBR) >> 3;
+		ptr = &child->thread.ibr[0];
+	} else {
+		regnum = (addr - PT_DBR) >> 3;
+		ptr = &child->thread.dbr[0];
+	}
+
+	if (regnum >= 8) {
+		dprintk("ptrace: rejecting access to register "
+				"address 0x%lx\n", addr);
+		return -1;
+	}
+#ifdef CONFIG_PERFMON
+	/*
+	 * Check if debug registers are used by perfmon. This
+	 * test must be done once we know that we can do the
+	 * operation, i.e. the arguments are all valid, but
+	 * before we start modifying the state.
+	 *
+	 * Perfmon needs to keep a count of how many processes
+	 * are trying to modify the debug registers for system
+	 * wide monitoring sessions.
+	 *
+	 * We also include read access here, because they may
+	 * cause the PMU-installed debug register state
+	 * (dbr[], ibr[]) to be reset. The two arrays are also
+	 * used by perfmon, but we do not use
+	 * IA64_THREAD_DBG_VALID. The registers are restored
+	 * by the PMU context switch code.
+	 */
+	if (pfm_use_debug_registers(child))
+		return -1;
+#endif
+
+	if (!(child->thread.flags & IA64_THREAD_DBG_VALID)) {
+		child->thread.flags |= IA64_THREAD_DBG_VALID;
+		memset(child->thread.dbr, 0,
+				sizeof(child->thread.dbr));
+		memset(child->thread.ibr, 0,
+				sizeof(child->thread.ibr));
+	}
+
+	ptr += regnum;
+
+	if ((regnum & 1) && write_access) {
+		/* don't let the user set kernel-level breakpoints: */
+		*ptr = *data & ~(7UL << 56);
+		return 0;
+	}
+	if (write_access)
+		*ptr = *data;
+	else
+		*data = *ptr;
+	return 0;
+}
+
+static const struct user_regset native_regsets[] = {
+	{
+		.core_note_type = NT_PRSTATUS,
+		.n = ELF_NGREG,
+		.size = sizeof(elf_greg_t), .align = sizeof(elf_greg_t),
+		.get = gpregs_get, .set = gpregs_set,
+		.writeback = gpregs_writeback
+	},
+	{
+		.core_note_type = NT_PRFPREG,
+		.n = ELF_NFPREG,
+		.size = sizeof(elf_fpreg_t), .align = sizeof(elf_fpreg_t),
+		.get = fpregs_get, .set = fpregs_set, .active = fpregs_active
+	},
+};
+
+static const struct user_regset_view user_ia64_view = {
+	.name = "ia64",
+	.e_machine = EM_IA_64,
+	.regsets = native_regsets, .n = ARRAY_SIZE(native_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *tsk)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	extern const struct user_regset_view user_ia32_view;
+	if (IS_IA32_PROCESS(task_pt_regs(tsk)))
+		return &user_ia32_view;
+#endif
+	return &user_ia64_view;
+}
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index f44fe8412162..a3022dc48ef8 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -109,6 +109,13 @@ check_versions (struct ia64_sal_systab *systab)
 		sal_revision = SAL_VERSION_CODE(2, 8);
 		sal_version = SAL_VERSION_CODE(0, 0);
 	}
+
+	if (ia64_platform_is("sn2") && (sal_revision == SAL_VERSION_CODE(2, 9)))
+		/*
+		 * SGI Altix has hard-coded version 2.9 in their prom
+		 * but they actually implement 3.2, so let's fix it here.
+		 */
+		sal_revision = SAL_VERSION_CODE(3, 2);
 }
 
 static void __init
diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c
index 779c3cca206c..b11bb50a197a 100644
--- a/arch/ia64/kernel/salinfo.c
+++ b/arch/ia64/kernel/salinfo.c
@@ -44,8 +44,8 @@
 #include <linux/smp.h>
 #include <linux/timer.h>
 #include <linux/vmalloc.h>
+#include <linux/semaphore.h>
 
-#include <asm/semaphore.h>
 #include <asm/sal.h>
 #include <asm/uaccess.h>
 
diff --git a/arch/ia64/kernel/semaphore.c b/arch/ia64/kernel/semaphore.c
deleted file mode 100644
index 2724ef3fbae2..000000000000
--- a/arch/ia64/kernel/semaphore.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * IA-64 semaphore implementation (derived from x86 version).
- *
- * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
- *	David Mosberger-Tang <davidm@hpl.hp.com>
- */
-
-/*
- * Semaphores are implemented using a two-way counter: The "count"
- * variable is decremented for each process that tries to acquire the
- * semaphore, while the "sleepers" variable is a count of such
- * acquires.
- *
- * Notably, the inline "up()" and "down()" functions can efficiently
- * test if they need to do any extra work (up needs to do something
- * only if count was negative before the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is contention
- * on the lock, and as such all this is the "non-critical" part of the
- * whole semaphore business. The critical part is the inline stuff in
- * <asm/semaphore.h> where we want to avoid any extra jumps and calls.
- */
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/errno.h>
-#include <asm/semaphore.h>
-
-/*
- * Logic:
- *  - Only on a boundary condition do we need to care. When we go
- *    from a negative count to a non-negative, we wake people up.
- *  - When we go from a non-negative count to a negative do we
- *    (a) synchronize with the "sleepers" count and (b) make sure
- *    that we're on the wakeup list before we synchronize so that
- *    we cannot lose wakeup events.
- */
-
-void
-__up (struct semaphore *sem)
-{
-	wake_up(&sem->wait);
-}
-
-void __sched __down (struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	unsigned long flags;
-
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	spin_lock_irqsave(&sem->wait.lock, flags);
-	add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
-	sem->sleepers++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock in
-		 * the wait_queue_head.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-		schedule();
-
-		spin_lock_irqsave(&sem->wait.lock, flags);
-		tsk->state = TASK_UNINTERRUPTIBLE;
-	}
-	remove_wait_queue_locked(&sem->wait, &wait);
-	wake_up_locked(&sem->wait);
-	spin_unlock_irqrestore(&sem->wait.lock, flags);
-	tsk->state = TASK_RUNNING;
-}
-
-int __sched __down_interruptible (struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	unsigned long flags;
-
-	tsk->state = TASK_INTERRUPTIBLE;
-	spin_lock_irqsave(&sem->wait.lock, flags);
-	add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
-	sem->sleepers ++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * With signals pending, this turns into
-		 * the trylock failure case - we won't be
-		 * sleeping, and we* can't get the lock as
-		 * it has contention. Just correct the count
-		 * and exit.
-		 */
-		if (signal_pending(current)) {
-			retval = -EINTR;
-			sem->sleepers = 0;
-			atomic_add(sleepers, &sem->count);
-			break;
-		}
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock in
-		 * wait_queue_head. The "-1" is because we're
-		 * still hoping to get the semaphore.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-		schedule();
-
-		spin_lock_irqsave(&sem->wait.lock, flags);
-		tsk->state = TASK_INTERRUPTIBLE;
-	}
-	remove_wait_queue_locked(&sem->wait, &wait);
-	wake_up_locked(&sem->wait);
-	spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-	tsk->state = TASK_RUNNING;
-	return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for having decremented the
- * count.
- */
-int
-__down_trylock (struct semaphore *sem)
-{
-	unsigned long flags;
-	int sleepers;
-
-	spin_lock_irqsave(&sem->wait.lock, flags);
-	sleepers = sem->sleepers + 1;
-	sem->sleepers = 0;
-
-	/*
-	 * Add "everybody else" and us into it. They aren't
-	 * playing, because we own the spinlock in the
-	 * wait_queue_head.
-	 */
-	if (!atomic_add_negative(sleepers, &sem->count)) {
-		wake_up_locked(&sem->wait);
-	}
-
-	spin_unlock_irqrestore(&sem->wait.lock, flags);
-	return 1;
-}
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index ebd1a09f3201..5015ca1275ca 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -59,6 +59,7 @@
 #include <asm/setup.h>
 #include <asm/smp.h>
 #include <asm/system.h>
+#include <asm/tlbflush.h>
 #include <asm/unistd.h>
 #include <asm/hpsim.h>
 
@@ -176,6 +177,29 @@ filter_rsvd_memory (unsigned long start, unsigned long end, void *arg)
 	return 0;
 }
 
+/*
+ * Similar to "filter_rsvd_memory()", but the reserved memory ranges
+ * are not filtered out.
+ */
+int __init
+filter_memory(unsigned long start, unsigned long end, void *arg)
+{
+	void (*func)(unsigned long, unsigned long, int);
+
+#if IGNORE_PFN0
+	if (start == PAGE_OFFSET) {
+		printk(KERN_WARNING "warning: skipping physical page 0\n");
+		start += PAGE_SIZE;
+		if (start >= end)
+			return 0;
+	}
+#endif
+	func = arg;
+	if (start < end)
+		call_pernode_memory(__pa(start), end - start, func);
+	return 0;
+}
+
 static void __init
 sort_regions (struct rsvd_region *rsvd_region, int max)
 {
@@ -493,6 +517,8 @@ setup_arch (char **cmdline_p)
 	acpi_table_init();
 # ifdef CONFIG_ACPI_NUMA
 	acpi_numa_init();
+	per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ?
+		32 : cpus_weight(early_cpu_possible_map)), additional_cpus);
 # endif
 #else
 # ifdef CONFIG_SMP
@@ -690,7 +716,7 @@ get_model_name(__u8 family, __u8 model)
 	if (overflow++ == 0)
 		printk(KERN_ERR
 		       "%s: Table overflow. Some processor model information will be missing\n",
-		       __FUNCTION__);
+		       __func__);
 	return "Unknown";
 }
 
@@ -785,7 +811,7 @@ get_max_cacheline_size (void)
         status = ia64_pal_cache_summary(&levels, &unique_caches);
         if (status != 0) {
                 printk(KERN_ERR "%s: ia64_pal_cache_summary() failed (status=%ld)\n",
-                       __FUNCTION__, status);
+                       __func__, status);
                 max = SMP_CACHE_BYTES;
 		/* Safest setup for "flush_icache_range()" */
 		ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT;
@@ -798,7 +824,7 @@ get_max_cacheline_size (void)
 		if (status != 0) {
 			printk(KERN_ERR
 			       "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n",
-			       __FUNCTION__, l, status);
+			       __func__, l, status);
 			max = SMP_CACHE_BYTES;
 			/* The safest setup for "flush_icache_range()" */
 			cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
@@ -814,7 +840,7 @@ get_max_cacheline_size (void)
 			if (status != 0) {
 				printk(KERN_ERR
 				"%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n",
-					__FUNCTION__, l, status);
+					__func__, l, status);
 				/* The safest setup for "flush_icache_range()" */
 				cci.pcci_stride = I_CACHE_STRIDE_SHIFT;
 			}
@@ -946,9 +972,10 @@ cpu_init (void)
 #endif
 
 	/* set ia64_ctx.max_rid to the maximum RID that is supported by all CPUs: */
-	if (ia64_pal_vm_summary(NULL, &vmi) == 0)
+	if (ia64_pal_vm_summary(NULL, &vmi) == 0) {
 		max_ctx = (1U << (vmi.pal_vm_info_2_s.rid_size - 3)) - 1;
-	else {
+		setup_ptcg_sem(vmi.pal_vm_info_2_s.max_purges, NPTCG_FROM_PAL);
+	} else {
 		printk(KERN_WARNING "cpu_init: PAL VM summary failed, assuming 18 RID bits\n");
 		max_ctx = (1U << 15) - 1;	/* use architected minimum */
 	}
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index 309da3567bc8..5740296c35af 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -342,15 +342,33 @@ setup_frame (int sig, struct k_sigaction *ka, siginfo_t *info, sigset_t *set,
 
 	new_sp = scr->pt.r12;
 	tramp_addr = (unsigned long) __kernel_sigtramp;
-	if ((ka->sa.sa_flags & SA_ONSTACK) && sas_ss_flags(new_sp) == 0) {
-		new_sp = current->sas_ss_sp + current->sas_ss_size;
-		/*
-		 * We need to check for the register stack being on the signal stack
-		 * separately, because it's switched separately (memory stack is switched
-		 * in the kernel, register stack is switched in the signal trampoline).
-		 */
-		if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
-			new_rbs = (current->sas_ss_sp + sizeof(long) - 1) & ~(sizeof(long) - 1);
+	if (ka->sa.sa_flags & SA_ONSTACK) {
+		int onstack = sas_ss_flags(new_sp);
+
+		if (onstack == 0) {
+			new_sp = current->sas_ss_sp + current->sas_ss_size;
+			/*
+			 * We need to check for the register stack being on the
+			 * signal stack separately, because it's switched
+			 * separately (memory stack is switched in the kernel,
+			 * register stack is switched in the signal trampoline).
+			 */
+			if (!rbs_on_sig_stack(scr->pt.ar_bspstore))
+				new_rbs = ALIGN(current->sas_ss_sp,
+						sizeof(long));
+		} else if (onstack == SS_ONSTACK) {
+			unsigned long check_sp;
+
+			/*
+			 * If we are on the alternate signal stack and would
+			 * overflow it, don't. Return an always-bogus address
+			 * instead so we will die with SIGSEGV.
+			 */
+			check_sp = (new_sp - sizeof(*frame)) & -STACK_ALIGN;
+			if (!likely(on_sig_stack(check_sp)))
+				return force_sigsegv_info(sig, (void __user *)
+							  check_sp);
+		}
 	}
 	frame = (void __user *) ((new_sp - sizeof(*frame)) & -STACK_ALIGN);
 
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 4e446aa5f4ac..9a9d4c489330 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -213,6 +213,19 @@ send_IPI_allbutself (int op)
  * Called with preemption disabled.
  */
 static inline void
+send_IPI_mask(cpumask_t mask, int op)
+{
+	unsigned int cpu;
+
+	for_each_cpu_mask(cpu, mask) {
+			send_IPI_single(cpu, op);
+	}
+}
+
+/*
+ * Called with preemption disabled.
+ */
+static inline void
 send_IPI_all (int op)
 {
 	int i;
@@ -401,6 +414,75 @@ smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int
 }
 EXPORT_SYMBOL(smp_call_function_single);
 
+/**
+ * smp_call_function_mask(): Run a function on a set of other CPUs.
+ * <mask>	The set of cpus to run on.  Must not include the current cpu.
+ * <func> 	The function to run. This must be fast and non-blocking.
+ * <info>	An arbitrary pointer to pass to the function.
+ * <wait>	If true, wait (atomically) until function
+ *		has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function_mask(cpumask_t mask,
+			   void (*func)(void *), void *info,
+			   int wait)
+{
+	struct call_data_struct data;
+	cpumask_t allbutself;
+	int cpus;
+
+	spin_lock(&call_lock);
+	allbutself = cpu_online_map;
+	cpu_clear(smp_processor_id(), allbutself);
+
+	cpus_and(mask, mask, allbutself);
+	cpus = cpus_weight(mask);
+	if (!cpus) {
+		spin_unlock(&call_lock);
+		return 0;
+	}
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	mb(); /* ensure store to call_data precedes setting of IPI_CALL_FUNC*/
+
+	/* Send a message to other CPUs */
+	if (cpus_equal(mask, allbutself))
+		send_IPI_allbutself(IPI_CALL_FUNC);
+	else
+		send_IPI_mask(mask, IPI_CALL_FUNC);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (wait)
+		while (atomic_read(&data.finished) != cpus)
+			cpu_relax();
+	call_data = NULL;
+
+	spin_unlock(&call_lock);
+	return 0;
+
+}
+EXPORT_SYMBOL(smp_call_function_mask);
+
 /*
  * this function sends a 'generic call function' IPI to all other CPUs
  * in the system.
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index 32ee5979a042..16483be18c0b 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -400,9 +400,9 @@ smp_callin (void)
 	/* Setup the per cpu irq handling data structures */
 	__setup_vector_irq(cpuid);
 	cpu_set(cpuid, cpu_online_map);
-	unlock_ipi_calllock();
 	per_cpu(cpu_state, cpuid) = CPU_ONLINE;
 	spin_unlock(&vector_lock);
+	unlock_ipi_calllock();
 
 	smp_setup_percpu_timer();
 
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index 17fda5293c67..48e15a51782f 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -59,6 +59,84 @@ static struct clocksource clocksource_itc = {
 };
 static struct clocksource *itc_clocksource;
 
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+
+#include <linux/kernel_stat.h>
+
+extern cputime_t cycle_to_cputime(u64 cyc);
+
+/*
+ * Called from the context switch with interrupts disabled, to charge all
+ * accumulated times to the current process, and to prepare accounting on
+ * the next process.
+ */
+void ia64_account_on_switch(struct task_struct *prev, struct task_struct *next)
+{
+	struct thread_info *pi = task_thread_info(prev);
+	struct thread_info *ni = task_thread_info(next);
+	cputime_t delta_stime, delta_utime;
+	__u64 now;
+
+	now = ia64_get_itc();
+
+	delta_stime = cycle_to_cputime(pi->ac_stime + (now - pi->ac_stamp));
+	account_system_time(prev, 0, delta_stime);
+	account_system_time_scaled(prev, delta_stime);
+
+	if (pi->ac_utime) {
+		delta_utime = cycle_to_cputime(pi->ac_utime);
+		account_user_time(prev, delta_utime);
+		account_user_time_scaled(prev, delta_utime);
+	}
+
+	pi->ac_stamp = ni->ac_stamp = now;
+	ni->ac_stime = ni->ac_utime = 0;
+}
+
+/*
+ * Account time for a transition between system, hard irq or soft irq state.
+ * Note that this function is called with interrupts enabled.
+ */
+void account_system_vtime(struct task_struct *tsk)
+{
+	struct thread_info *ti = task_thread_info(tsk);
+	unsigned long flags;
+	cputime_t delta_stime;
+	__u64 now;
+
+	local_irq_save(flags);
+
+	now = ia64_get_itc();
+
+	delta_stime = cycle_to_cputime(ti->ac_stime + (now - ti->ac_stamp));
+	account_system_time(tsk, 0, delta_stime);
+	account_system_time_scaled(tsk, delta_stime);
+	ti->ac_stime = 0;
+
+	ti->ac_stamp = now;
+
+	local_irq_restore(flags);
+}
+
+/*
+ * Called from the timer interrupt handler to charge accumulated user time
+ * to the current process.  Must be called with interrupts disabled.
+ */
+void account_process_tick(struct task_struct *p, int user_tick)
+{
+	struct thread_info *ti = task_thread_info(p);
+	cputime_t delta_utime;
+
+	if (ti->ac_utime) {
+		delta_utime = cycle_to_cputime(ti->ac_utime);
+		account_user_time(p, delta_utime);
+		account_user_time_scaled(p, delta_utime);
+		ti->ac_utime = 0;
+	}
+}
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+
 static irqreturn_t
 timer_interrupt (int irq, void *dev_id)
 {
diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index 52f70bbc192a..ff0e7c10faa7 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -13,6 +13,7 @@
  * 2001/08/13	Correct size of extended floats (float_fsz) from 16 to 10 bytes.
  * 2001/01/17	Add support emulation of unaligned kernel accesses.
  */
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/tty.h>
@@ -28,7 +29,7 @@ extern int die_if_kernel(char *str, struct pt_regs *regs, long err);
 #undef DEBUG_UNALIGNED_TRAP
 
 #ifdef DEBUG_UNALIGNED_TRAP
-# define DPRINT(a...)	do { printk("%s %u: ", __FUNCTION__, __LINE__); printk (a); } while (0)
+# define DPRINT(a...)	do { printk("%s %u: ", __func__, __LINE__); printk (a); } while (0)
 # define DDUMP(str,vp,len)	dump(str, vp, len)
 
 static void
@@ -674,7 +675,7 @@ emulate_load_updates (update_t type, load_store_t ld, struct pt_regs *regs, unsi
 	 * just in case.
 	 */
 	if (ld.x6_op == 1 || ld.x6_op == 3) {
-		printk(KERN_ERR "%s: register update on speculative load, error\n", __FUNCTION__);
+		printk(KERN_ERR "%s: register update on speculative load, error\n", __func__);
 		if (die_if_kernel("unaligned reference on speculative load with register update\n",
 				  regs, 30))
 			return;
@@ -1104,7 +1105,7 @@ emulate_load_floatpair (unsigned long ifa, load_store_t ld, struct pt_regs *regs
 		 */
 		if (ld.x6_op == 1 || ld.x6_op == 3)
 			printk(KERN_ERR "%s: register update on speculative load pair, error\n",
-			       __FUNCTION__);
+			       __func__);
 
 		setreg(ld.r3, ifa, 0, regs);
 	}
@@ -1290,7 +1291,7 @@ within_logging_rate_limit (void)
 {
 	static unsigned long count, last_time;
 
-	if (jiffies - last_time > 5*HZ)
+	if (time_after(jiffies, last_time + 5 * HZ))
 		count = 0;
 	if (count < 5) {
 		last_time = jiffies;
diff --git a/arch/ia64/kernel/unwind.c b/arch/ia64/kernel/unwind.c
index c1bdb5131814..67810b77d998 100644
--- a/arch/ia64/kernel/unwind.c
+++ b/arch/ia64/kernel/unwind.c
@@ -257,7 +257,7 @@ pt_regs_off (unsigned long reg)
 		off = unw.pt_regs_offsets[reg];
 
 	if (off < 0) {
-		UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __FUNCTION__, reg);
+		UNW_DPRINT(0, "unwind.%s: bad scratch reg r%lu\n", __func__, reg);
 		off = 0;
 	}
 	return (unsigned long) off;
@@ -268,13 +268,13 @@ get_scratch_regs (struct unw_frame_info *info)
 {
 	if (!info->pt) {
 		/* This should not happen with valid unwind info.  */
-		UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __FUNCTION__);
+		UNW_DPRINT(0, "unwind.%s: bad unwind info: resetting info->pt\n", __func__);
 		if (info->flags & UNW_FLAG_INTERRUPT_FRAME)
 			info->pt = (unsigned long) ((struct pt_regs *) info->psp - 1);
 		else
 			info->pt = info->sp - 16;
 	}
-	UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __FUNCTION__, info->sp, info->pt);
+	UNW_DPRINT(3, "unwind.%s: sp 0x%lx pt 0x%lx\n", __func__, info->sp, info->pt);
 	return (struct pt_regs *) info->pt;
 }
 
@@ -294,7 +294,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 			return 0;
 		}
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent r%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 
@@ -341,7 +341,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 					{
 						UNW_DPRINT(0, "unwind.%s: %p outside of regstk "
 							"[0x%lx-0x%lx)\n",
-							__FUNCTION__, (void *) addr,
+							__func__, (void *) addr,
 							info->regstk.limit,
 							info->regstk.top);
 						return -1;
@@ -374,7 +374,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 		    || (unsigned long) addr >= info->regstk.top)
 		{
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to access register outside "
-				   "of rbs\n",  __FUNCTION__);
+				   "of rbs\n",  __func__);
 			return -1;
 		}
 		if ((unsigned long) nat_addr >= info->regstk.top)
@@ -385,7 +385,7 @@ unw_access_gr (struct unw_frame_info *info, int regnum, unsigned long *val, char
 	if (write) {
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else {
 			*addr = *val;
 			if (*nat)
@@ -427,13 +427,13 @@ unw_access_br (struct unw_frame_info *info, int regnum, unsigned long *val, int
 
 	      default:
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent b%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 	if (write)
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	else
@@ -450,7 +450,7 @@ unw_access_fr (struct unw_frame_info *info, int regnum, struct ia64_fpreg *val,
 
 	if ((unsigned) (regnum - 2) >= 126) {
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent f%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 
@@ -482,7 +482,7 @@ unw_access_fr (struct unw_frame_info *info, int regnum, struct ia64_fpreg *val,
 	if (write)
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	else
@@ -572,14 +572,14 @@ unw_access_ar (struct unw_frame_info *info, int regnum, unsigned long *val, int
 
 	      default:
 		UNW_DPRINT(0, "unwind.%s: trying to access non-existent ar%u\n",
-			   __FUNCTION__, regnum);
+			   __func__, regnum);
 		return -1;
 	}
 
 	if (write) {
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	} else
@@ -600,7 +600,7 @@ unw_access_pr (struct unw_frame_info *info, unsigned long *val, int write)
 	if (write) {
 		if (read_only(addr)) {
 			UNW_DPRINT(0, "unwind.%s: ignoring attempt to write read-only location\n",
-				__FUNCTION__);
+				__func__);
 		} else
 			*addr = *val;
 	} else
@@ -699,7 +699,7 @@ decode_abreg (unsigned char abreg, int memory)
 	      default:
 		break;
 	}
-	UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __FUNCTION__, abreg);
+	UNW_DPRINT(0, "unwind.%s: bad abreg=0x%x\n", __func__, abreg);
 	return UNW_REG_LC;
 }
 
@@ -739,7 +739,7 @@ spill_next_when (struct unw_reg_info **regp, struct unw_reg_info *lim, unw_word
 			return;
 		}
 	}
-	UNW_DPRINT(0, "unwind.%s: excess spill!\n",  __FUNCTION__);
+	UNW_DPRINT(0, "unwind.%s: excess spill!\n",  __func__);
 }
 
 static inline void
@@ -855,11 +855,11 @@ desc_abi (unsigned char abi, unsigned char context, struct unw_state_record *sr)
 {
 	if (abi == 3 && context == 'i') {
 		sr->flags |= UNW_FLAG_INTERRUPT_FRAME;
-		UNW_DPRINT(3, "unwind.%s: interrupt frame\n",  __FUNCTION__);
+		UNW_DPRINT(3, "unwind.%s: interrupt frame\n",  __func__);
 	}
 	else
 		UNW_DPRINT(0, "unwind%s: ignoring unwabi(abi=0x%x,context=0x%x)\n",
-				__FUNCTION__, abi, context);
+				__func__, abi, context);
 }
 
 static inline void
@@ -1347,7 +1347,7 @@ script_emit (struct unw_script *script, struct unw_insn insn)
 {
 	if (script->count >= UNW_MAX_SCRIPT_LEN) {
 		UNW_DPRINT(0, "unwind.%s: script exceeds maximum size of %u instructions!\n",
-			__FUNCTION__, UNW_MAX_SCRIPT_LEN);
+			__func__, UNW_MAX_SCRIPT_LEN);
 		return;
 	}
 	script->insn[script->count++] = insn;
@@ -1389,7 +1389,7 @@ emit_nat_info (struct unw_state_record *sr, int i, struct unw_script *script)
 
 	      default:
 		UNW_DPRINT(0, "unwind.%s: don't know how to emit nat info for where = %u\n",
-			   __FUNCTION__, r->where);
+			   __func__, r->where);
 		return;
 	}
 	insn.opc = opc;
@@ -1446,7 +1446,7 @@ compile_reg (struct unw_state_record *sr, int i, struct unw_script *script)
 				val = offsetof(struct pt_regs, f6) + 16*(rval - 6);
 			else
 				UNW_DPRINT(0, "unwind.%s: kernel may not touch f%lu\n",
-					   __FUNCTION__, rval);
+					   __func__, rval);
 		}
 		break;
 
@@ -1474,7 +1474,7 @@ compile_reg (struct unw_state_record *sr, int i, struct unw_script *script)
 
 	      default:
 		UNW_DPRINT(0, "unwind%s: register %u has unexpected `where' value of %u\n",
-			   __FUNCTION__, i, r->where);
+			   __func__, i, r->where);
 		break;
 	}
 	insn.opc = opc;
@@ -1547,10 +1547,10 @@ build_script (struct unw_frame_info *info)
 		r->when = UNW_WHEN_NEVER;
 	sr.pr_val = info->pr;
 
-	UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __FUNCTION__, ip);
+	UNW_DPRINT(3, "unwind.%s: ip 0x%lx\n", __func__, ip);
 	script = script_new(ip);
 	if (!script) {
-		UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n",  __FUNCTION__);
+		UNW_DPRINT(0, "unwind.%s: failed to create unwind script\n",  __func__);
 		STAT(unw.stat.script.build_time += ia64_get_itc() - start);
 		return NULL;
 	}
@@ -1569,7 +1569,7 @@ build_script (struct unw_frame_info *info)
 	if (!e) {
 		/* no info, return default unwinder (leaf proc, no mem stack, no saved regs)  */
 		UNW_DPRINT(1, "unwind.%s: no unwind info for ip=0x%lx (prev ip=0x%lx)\n",
-			__FUNCTION__, ip, unw.cache[info->prev_script].ip);
+			__func__, ip, unw.cache[info->prev_script].ip);
 		sr.curr.reg[UNW_REG_RP].where = UNW_WHERE_BR;
 		sr.curr.reg[UNW_REG_RP].when = -1;
 		sr.curr.reg[UNW_REG_RP].val = 0;
@@ -1618,13 +1618,13 @@ build_script (struct unw_frame_info *info)
 		sr.curr.reg[UNW_REG_RP].when = -1;
 		sr.curr.reg[UNW_REG_RP].val = sr.return_link_reg;
 		UNW_DPRINT(1, "unwind.%s: using default for rp at ip=0x%lx where=%d val=0x%lx\n",
-			   __FUNCTION__, ip, sr.curr.reg[UNW_REG_RP].where,
+			   __func__, ip, sr.curr.reg[UNW_REG_RP].where,
 			   sr.curr.reg[UNW_REG_RP].val);
 	}
 
 #ifdef UNW_DEBUG
 	UNW_DPRINT(1, "unwind.%s: state record for func 0x%lx, t=%u:\n",
-		__FUNCTION__, table->segment_base + e->start_offset, sr.when_target);
+		__func__, table->segment_base + e->start_offset, sr.when_target);
 	for (r = sr.curr.reg; r < sr.curr.reg + UNW_NUM_REGS; ++r) {
 		if (r->where != UNW_WHERE_NONE || r->when != UNW_WHEN_NEVER) {
 			UNW_DPRINT(1, "  %s <- ", unw.preg_name[r - sr.curr.reg]);
@@ -1746,7 +1746,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state)
 			} else {
 				s[dst] = 0;
 				UNW_DPRINT(0, "unwind.%s: no state->pt, dst=%ld, val=%ld\n",
-					   __FUNCTION__, dst, val);
+					   __func__, dst, val);
 			}
 			break;
 
@@ -1756,7 +1756,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state)
 			else {
 				s[dst] = 0;
 				UNW_DPRINT(0, "unwind.%s: UNW_INSN_MOVE_CONST bad val=%ld\n",
-					   __FUNCTION__, val);
+					   __func__, val);
 			}
 			break;
 
@@ -1791,7 +1791,7 @@ run_script (struct unw_script *script, struct unw_frame_info *state)
 			    || s[val] < TASK_SIZE)
 			{
 				UNW_DPRINT(0, "unwind.%s: rejecting bad psp=0x%lx\n",
-					   __FUNCTION__, s[val]);
+					   __func__, s[val]);
 				break;
 			}
 #endif
@@ -1825,7 +1825,7 @@ find_save_locs (struct unw_frame_info *info)
 	if ((info->ip & (local_cpu_data->unimpl_va_mask | 0xf)) || info->ip < TASK_SIZE) {
 		/* don't let obviously bad addresses pollute the cache */
 		/* FIXME: should really be level 0 but it occurs too often. KAO */
-		UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __FUNCTION__, info->ip);
+		UNW_DPRINT(1, "unwind.%s: rejecting bad ip=0x%lx\n", __func__, info->ip);
 		info->rp_loc = NULL;
 		return -1;
 	}
@@ -1838,7 +1838,7 @@ find_save_locs (struct unw_frame_info *info)
 			spin_unlock_irqrestore(&unw.lock, flags);
 			UNW_DPRINT(0,
 				   "unwind.%s: failed to locate/build unwind script for ip %lx\n",
-				   __FUNCTION__, info->ip);
+				   __func__, info->ip);
 			return -1;
 		}
 		have_write_lock = 1;
@@ -1882,21 +1882,21 @@ unw_unwind (struct unw_frame_info *info)
 	if (!unw_valid(info, info->rp_loc)) {
 		/* FIXME: should really be level 0 but it occurs too often. KAO */
 		UNW_DPRINT(1, "unwind.%s: failed to locate return link (ip=0x%lx)!\n",
-			   __FUNCTION__, info->ip);
+			   __func__, info->ip);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
 	/* restore the ip */
 	ip = info->ip = *info->rp_loc;
 	if (ip < GATE_ADDR) {
-		UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __FUNCTION__, ip);
+		UNW_DPRINT(2, "unwind.%s: reached user-space (ip=0x%lx)\n", __func__, ip);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
 
 	/* validate the previous stack frame pointer */
 	if (!unw_valid(info, info->pfs_loc)) {
-		UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __FUNCTION__);
+		UNW_DPRINT(0, "unwind.%s: failed to locate ar.pfs!\n", __func__);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
@@ -1912,13 +1912,13 @@ unw_unwind (struct unw_frame_info *info)
 			num_regs = *info->cfm_loc & 0x7f;		/* size of frame */
 		info->pfs_loc =
 			(unsigned long *) (info->pt + offsetof(struct pt_regs, ar_pfs));
-		UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __FUNCTION__, info->pt);
+		UNW_DPRINT(3, "unwind.%s: interrupt_frame pt 0x%lx\n", __func__, info->pt);
 	} else
 		num_regs = (*info->cfm_loc >> 7) & 0x7f;	/* size of locals */
 	info->bsp = (unsigned long) ia64_rse_skip_regs((unsigned long *) info->bsp, -num_regs);
 	if (info->bsp < info->regstk.limit || info->bsp > info->regstk.top) {
 		UNW_DPRINT(0, "unwind.%s: bsp (0x%lx) out of range [0x%lx-0x%lx]\n",
-			__FUNCTION__, info->bsp, info->regstk.limit, info->regstk.top);
+			__func__, info->bsp, info->regstk.limit, info->regstk.top);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
@@ -1927,14 +1927,14 @@ unw_unwind (struct unw_frame_info *info)
 	info->sp = info->psp;
 	if (info->sp < info->memstk.top || info->sp > info->memstk.limit) {
 		UNW_DPRINT(0, "unwind.%s: sp (0x%lx) out of range [0x%lx-0x%lx]\n",
-			__FUNCTION__, info->sp, info->memstk.top, info->memstk.limit);
+			__func__, info->sp, info->memstk.top, info->memstk.limit);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
 
 	if (info->ip == prev_ip && info->sp == prev_sp && info->bsp == prev_bsp) {
 		UNW_DPRINT(0, "unwind.%s: ip, sp, bsp unchanged; stopping here (ip=0x%lx)\n",
-			   __FUNCTION__, ip);
+			   __func__, ip);
 		STAT(unw.stat.api.unwind_time += ia64_get_itc() - start; local_irq_restore(flags));
 		return -1;
 	}
@@ -1961,7 +1961,7 @@ unw_unwind_to_user (struct unw_frame_info *info)
 		if ((long)((unsigned long)info->task + IA64_STK_OFFSET - sp)
 		    < IA64_PT_REGS_SIZE) {
 			UNW_DPRINT(0, "unwind.%s: ran off the top of the kernel stack\n",
-				   __FUNCTION__);
+				   __func__);
 			break;
 		}
 		if (unw_is_intr_frame(info) &&
@@ -1971,13 +1971,13 @@ unw_unwind_to_user (struct unw_frame_info *info)
 			unw_get_rp(info, &ip);
 			UNW_DPRINT(0, "unwind.%s: failed to read "
 				   "predicate register (ip=0x%lx)\n",
-				__FUNCTION__, ip);
+				__func__, ip);
 			return -1;
 		}
 	} while (unw_unwind(info) >= 0);
 	unw_get_ip(info, &ip);
 	UNW_DPRINT(0, "unwind.%s: failed to unwind to user-level (ip=0x%lx)\n",
-		   __FUNCTION__, ip);
+		   __func__, ip);
 	return -1;
 }
 EXPORT_SYMBOL(unw_unwind_to_user);
@@ -2028,7 +2028,7 @@ init_frame_info (struct unw_frame_info *info, struct task_struct *t,
 		   "  pr     0x%lx\n"
 		   "  sw     0x%lx\n"
 		   "  sp     0x%lx\n",
-		   __FUNCTION__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
+		   __func__, (unsigned long) t, rbslimit, rbstop, stktop, stklimit,
 		   info->pr, (unsigned long) info->sw, info->sp);
 	STAT(unw.stat.api.init_time += ia64_get_itc() - start; local_irq_restore(flags));
 }
@@ -2047,7 +2047,7 @@ unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t, struct
 		   "  bsp    0x%lx\n"
 		   "  sol    0x%lx\n"
 		   "  ip     0x%lx\n",
-		   __FUNCTION__, info->bsp, sol, info->ip);
+		   __func__, info->bsp, sol, info->ip);
 	find_save_locs(info);
 }
 
@@ -2058,7 +2058,7 @@ unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t)
 {
 	struct switch_stack *sw = (struct switch_stack *) (t->thread.ksp + 16);
 
-	UNW_DPRINT(1, "unwind.%s\n", __FUNCTION__);
+	UNW_DPRINT(1, "unwind.%s\n", __func__);
 	unw_init_frame_info(info, t, sw);
 }
 EXPORT_SYMBOL(unw_init_from_blocked_task);
@@ -2088,7 +2088,7 @@ unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned lon
 
 	if (end - start <= 0) {
 		UNW_DPRINT(0, "unwind.%s: ignoring attempt to insert empty unwind table\n",
-			   __FUNCTION__);
+			   __func__);
 		return NULL;
 	}
 
@@ -2119,14 +2119,14 @@ unw_remove_unwind_table (void *handle)
 
 	if (!handle) {
 		UNW_DPRINT(0, "unwind.%s: ignoring attempt to remove non-existent unwind table\n",
-			   __FUNCTION__);
+			   __func__);
 		return;
 	}
 
 	table = handle;
 	if (table == &unw.kernel_table) {
 		UNW_DPRINT(0, "unwind.%s: sorry, freeing the kernel's unwind table is a "
-			   "no-can-do!\n", __FUNCTION__);
+			   "no-can-do!\n", __func__);
 		return;
 	}
 
@@ -2139,7 +2139,7 @@ unw_remove_unwind_table (void *handle)
 				break;
 		if (!prev) {
 			UNW_DPRINT(0, "unwind.%s: failed to find unwind table %p\n",
-				   __FUNCTION__, (void *) table);
+				   __func__, (void *) table);
 			spin_unlock_irqrestore(&unw.lock, flags);
 			return;
 		}
@@ -2185,7 +2185,7 @@ create_gate_table (void)
 		}
 
 	if (!punw) {
-		printk("%s: failed to find gate DSO's unwind table!\n", __FUNCTION__);
+		printk("%s: failed to find gate DSO's unwind table!\n", __func__);
 		return 0;
 	}
 
@@ -2202,7 +2202,7 @@ create_gate_table (void)
 	unw.gate_table = kmalloc(size, GFP_KERNEL);
 	if (!unw.gate_table) {
 		unw.gate_table_size = 0;
-		printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __FUNCTION__);
+		printk(KERN_ERR "%s: unable to create unwind data for gate page!\n", __func__);
 		return 0;
 	}
 	unw.gate_table_size = size;
diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c
index 344f64eca7a9..798bf9835a51 100644
--- a/arch/ia64/mm/contig.c
+++ b/arch/ia64/mm/contig.c
@@ -45,8 +45,6 @@ void show_mem(void)
 
 	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
 	printk(KERN_INFO "Node memory in pages:\n");
 	for_each_online_pgdat(pgdat) {
 		unsigned long present;
@@ -255,7 +253,7 @@ paging_init (void)
 	max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
 
 #ifdef CONFIG_VIRTUAL_MEM_MAP
-	efi_memmap_walk(register_active_ranges, NULL);
+	efi_memmap_walk(filter_memory, register_active_ranges);
 	efi_memmap_walk(find_largest_hole, (u64 *)&max_gap);
 	if (max_gap < LARGE_GAP) {
 		vmem_map = (struct page *) 0;
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index ee5e68b2af94..544dc420c65e 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -104,7 +104,7 @@ static int __meminit early_nr_cpus_node(int node)
 {
 	int cpu, n = 0;
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++)
+	for_each_possible_early_cpu(cpu)
 		if (node == node_cpuid[cpu].nid)
 			n++;
 
@@ -124,6 +124,7 @@ static unsigned long __meminit compute_pernodesize(int node)
 	pernodesize += node * L1_CACHE_BYTES;
 	pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
 	pernodesize += L1_CACHE_ALIGN(sizeof(struct ia64_node_data));
+	pernodesize += L1_CACHE_ALIGN(sizeof(pg_data_t));
 	pernodesize = PAGE_ALIGN(pernodesize);
 	return pernodesize;
 }
@@ -142,7 +143,7 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
 #ifdef CONFIG_SMP
 	int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for_each_possible_early_cpu(cpu) {
 		if (node == node_cpuid[cpu].nid) {
 			memcpy(__va(cpu_data), __phys_per_cpu_start,
 			       __per_cpu_end - __per_cpu_start);
@@ -345,7 +346,7 @@ static void __init initialize_pernode_data(void)
 
 #ifdef CONFIG_SMP
 	/* Set the node_data pointer for each per-cpu struct */
-	for (cpu = 0; cpu < NR_CPUS; cpu++) {
+	for_each_possible_early_cpu(cpu) {
 		node = node_cpuid[cpu].nid;
 		per_cpu(cpu_info, cpu).node_data = mem_data[node].node_data;
 	}
@@ -444,7 +445,7 @@ void __init find_memory(void)
 			mem_data[node].min_pfn = ~0UL;
 		}
 
-	efi_memmap_walk(register_active_ranges, NULL);
+	efi_memmap_walk(filter_memory, register_active_ranges);
 
 	/*
 	 * Initialize the boot memory maps in reverse order since that's
@@ -493,13 +494,9 @@ void __cpuinit *per_cpu_init(void)
 	int cpu;
 	static int first_time = 1;
 
-
-	if (smp_processor_id() != 0)
-		return __per_cpu_start + __per_cpu_offset[smp_processor_id()];
-
 	if (first_time) {
 		first_time = 0;
-		for (cpu = 0; cpu < NR_CPUS; cpu++)
+		for_each_possible_early_cpu(cpu)
 			per_cpu(local_per_cpu_offset, cpu) = __per_cpu_offset[cpu];
 	}
 
@@ -522,8 +519,6 @@ void show_mem(void)
 
 	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
 	printk(KERN_INFO "Node memory in pages:\n");
 	for_each_online_pgdat(pgdat) {
 		unsigned long present;
diff --git a/arch/ia64/mm/fault.c b/arch/ia64/mm/fault.c
index 3e69881648a3..23088bed111e 100644
--- a/arch/ia64/mm/fault.c
+++ b/arch/ia64/mm/fault.c
@@ -26,7 +26,7 @@ static inline int notify_page_fault(struct pt_regs *regs, int trap)
 	if (!user_mode(regs)) {
 		/* kprobe_running() needs smp_processor_id() */
 		preempt_disable();
-		if (kprobe_running() && kprobes_fault_handler(regs, trap))
+		if (kprobe_running() && kprobe_fault_handler(regs, trap))
 			ret = 1;
 		preempt_enable();
 	}
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 25aef6211a54..5c1de53c8c1c 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -58,7 +58,6 @@ __ia64_sync_icache_dcache (pte_t pte)
 {
 	unsigned long addr;
 	struct page *page;
-	unsigned long order;
 
 	page = pte_page(pte);
 	addr = (unsigned long) page_address(page);
@@ -66,12 +65,7 @@ __ia64_sync_icache_dcache (pte_t pte)
 	if (test_bit(PG_arch_1, &page->flags))
 		return;				/* i-cache is already coherent with d-cache */
 
-	if (PageCompound(page)) {
-		order = compound_order(page);
-		flush_icache_range(addr, addr + (1UL << order << PAGE_SHIFT));
-	}
-	else
-		flush_icache_range(addr, addr + PAGE_SIZE);
+	flush_icache_range(addr, addr + (PAGE_SIZE << compound_order(page)));
 	set_bit(PG_arch_1, &page->flags);	/* mark page as clean */
 }
 
@@ -553,12 +547,10 @@ find_largest_hole (u64 start, u64 end, void *arg)
 #endif /* CONFIG_VIRTUAL_MEM_MAP */
 
 int __init
-register_active_ranges(u64 start, u64 end, void *arg)
+register_active_ranges(u64 start, u64 len, int nid)
 {
-	int nid = paddr_to_nid(__pa(start));
+	u64 end = start + len;
 
-	if (nid < 0)
-		nid = 0;
 #ifdef CONFIG_KEXEC
 	if (start > crashk_res.start && start < crashk_res.end)
 		start = crashk_res.end;
@@ -714,7 +706,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 
 	if (ret)
 		printk("%s: Problem encountered in __add_pages() as ret=%d\n",
-		       __FUNCTION__,  ret);
+		       __func__,  ret);
 
 	return ret;
 }
diff --git a/arch/ia64/mm/numa.c b/arch/ia64/mm/numa.c
index 7807fc5c0422..b73bf1838e57 100644
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@@ -27,7 +27,9 @@
  */
 int num_node_memblks;
 struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
-struct node_cpuid_s node_cpuid[NR_CPUS];
+struct node_cpuid_s node_cpuid[NR_CPUS] =
+	{ [0 ... NR_CPUS-1] = { .phys_id = 0, .nid = NUMA_NO_NODE } };
+
 /*
  * This is a matrix with "distances" between nodes, they should be
  * proportional to the memory access latency ratios.
diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c
index 655da240d13c..d52ec4e83409 100644
--- a/arch/ia64/mm/tlb.c
+++ b/arch/ia64/mm/tlb.c
@@ -11,6 +11,9 @@
  * Rohit Seth <rohit.seth@intel.com>
  * Ken Chen <kenneth.w.chen@intel.com>
  * Christophe de Dinechin <ddd@hp.com>: Avoid ptc.e on memory allocation
+ * Copyright (C) 2007 Intel Corp
+ *	Fenghua Yu <fenghua.yu@intel.com>
+ *	Add multiple ptc.g/ptc.ga instruction support in global tlb purge.
  */
 #include <linux/module.h>
 #include <linux/init.h>
@@ -26,6 +29,9 @@
 #include <asm/pal.h>
 #include <asm/tlbflush.h>
 #include <asm/dma.h>
+#include <asm/processor.h>
+#include <asm/sal.h>
+#include <asm/tlb.h>
 
 static struct {
 	unsigned long mask;	/* mask of supported purge page-sizes */
@@ -39,6 +45,10 @@ struct ia64_ctx ia64_ctx = {
 };
 
 DEFINE_PER_CPU(u8, ia64_need_tlb_flush);
+DEFINE_PER_CPU(u8, ia64_tr_num);  /*Number of TR slots in current processor*/
+DEFINE_PER_CPU(u8, ia64_tr_used); /*Max Slot number used by kernel*/
+
+struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
 
 /*
  * Initializes the ia64_ctx.bitmap array based on max_ctx+1.
@@ -84,14 +94,140 @@ wrap_mmu_context (struct mm_struct *mm)
 	local_flush_tlb_all();
 }
 
+/*
+ * Implement "spinaphores" ... like counting semaphores, but they
+ * spin instead of sleeping.  If there are ever any other users for
+ * this primitive it can be moved up to a spinaphore.h header.
+ */
+struct spinaphore {
+	atomic_t	cur;
+};
+
+static inline void spinaphore_init(struct spinaphore *ss, int val)
+{
+	atomic_set(&ss->cur, val);
+}
+
+static inline void down_spin(struct spinaphore *ss)
+{
+	while (unlikely(!atomic_add_unless(&ss->cur, -1, 0)))
+		while (atomic_read(&ss->cur) == 0)
+			cpu_relax();
+}
+
+static inline void up_spin(struct spinaphore *ss)
+{
+	atomic_add(1, &ss->cur);
+}
+
+static struct spinaphore ptcg_sem;
+static u16 nptcg = 1;
+static int need_ptcg_sem = 1;
+static int toolatetochangeptcgsem = 0;
+
+/*
+ * Kernel parameter "nptcg=" overrides max number of concurrent global TLB
+ * purges which is reported from either PAL or SAL PALO.
+ *
+ * We don't have sanity checking for nptcg value. It's the user's responsibility
+ * for valid nptcg value on the platform. Otherwise, kernel may hang in some
+ * cases.
+ */
+static int __init
+set_nptcg(char *str)
+{
+	int value = 0;
+
+	get_option(&str, &value);
+	setup_ptcg_sem(value, NPTCG_FROM_KERNEL_PARAMETER);
+
+	return 1;
+}
+
+__setup("nptcg=", set_nptcg);
+
+/*
+ * Maximum number of simultaneous ptc.g purges in the system can
+ * be defined by PAL_VM_SUMMARY (in which case we should take
+ * the smallest value for any cpu in the system) or by the PAL
+ * override table (in which case we should ignore the value from
+ * PAL_VM_SUMMARY).
+ *
+ * Kernel parameter "nptcg=" overrides maximum number of simultanesous ptc.g
+ * purges defined in either PAL_VM_SUMMARY or PAL override table. In this case,
+ * we should ignore the value from either PAL_VM_SUMMARY or PAL override table.
+ *
+ * Complicating the logic here is the fact that num_possible_cpus()
+ * isn't fully setup until we start bringing cpus online.
+ */
+void
+setup_ptcg_sem(int max_purges, int nptcg_from)
+{
+	static int kp_override;
+	static int palo_override;
+	static int firstcpu = 1;
+
+	if (toolatetochangeptcgsem) {
+		BUG_ON(max_purges < nptcg);
+		return;
+	}
+
+	if (nptcg_from == NPTCG_FROM_KERNEL_PARAMETER) {
+		kp_override = 1;
+		nptcg = max_purges;
+		goto resetsema;
+	}
+	if (kp_override) {
+		need_ptcg_sem = num_possible_cpus() > nptcg;
+		return;
+	}
+
+	if (nptcg_from == NPTCG_FROM_PALO) {
+		palo_override = 1;
+
+		/* In PALO max_purges == 0 really means it! */
+		if (max_purges == 0)
+			panic("Whoa! Platform does not support global TLB purges.\n");
+		nptcg = max_purges;
+		if (nptcg == PALO_MAX_TLB_PURGES) {
+			need_ptcg_sem = 0;
+			return;
+		}
+		goto resetsema;
+	}
+	if (palo_override) {
+		if (nptcg != PALO_MAX_TLB_PURGES)
+			need_ptcg_sem = (num_possible_cpus() > nptcg);
+		return;
+	}
+
+	/* In PAL_VM_SUMMARY max_purges == 0 actually means 1 */
+	if (max_purges == 0) max_purges = 1;
+
+	if (firstcpu) {
+		nptcg = max_purges;
+		firstcpu = 0;
+	}
+	if (max_purges < nptcg)
+		nptcg = max_purges;
+	if (nptcg == PAL_MAX_PURGES) {
+		need_ptcg_sem = 0;
+		return;
+	} else
+		need_ptcg_sem = (num_possible_cpus() > nptcg);
+
+resetsema:
+	spinaphore_init(&ptcg_sem, max_purges);
+}
+
 void
 ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start,
 		       unsigned long end, unsigned long nbits)
 {
-	static DEFINE_SPINLOCK(ptcg_lock);
-
 	struct mm_struct *active_mm = current->active_mm;
 
+	toolatetochangeptcgsem = 1;
+
 	if (mm != active_mm) {
 		/* Restore region IDs for mm */
 		if (mm && active_mm) {
@@ -102,19 +238,20 @@ ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start,
 		}
 	}
 
-	/* HW requires global serialization of ptc.ga.  */
-	spin_lock(&ptcg_lock);
-	{
-		do {
-			/*
-			 * Flush ALAT entries also.
-			 */
-			ia64_ptcga(start, (nbits<<2));
-			ia64_srlz_i();
-			start += (1UL << nbits);
-		} while (start < end);
-	}
-	spin_unlock(&ptcg_lock);
+	if (need_ptcg_sem)
+		down_spin(&ptcg_sem);
+
+	do {
+		/*
+		 * Flush ALAT entries also.
+		 */
+		ia64_ptcga(start, (nbits << 2));
+		ia64_srlz_i();
+		start += (1UL << nbits);
+	} while (start < end);
+
+	if (need_ptcg_sem)
+		up_spin(&ptcg_sem);
 
         if (mm != active_mm) {
                 activate_context(active_mm);
@@ -190,6 +327,9 @@ ia64_tlb_init (void)
 	ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */
 	unsigned long tr_pgbits;
 	long status;
+	pal_vm_info_1_u_t vm_info_1;
+	pal_vm_info_2_u_t vm_info_2;
+	int cpu = smp_processor_id();
 
 	if ((status = ia64_pal_vm_page_size(&tr_pgbits, &purge.mask)) != 0) {
 		printk(KERN_ERR "PAL_VM_PAGE_SIZE failed with status=%ld; "
@@ -206,4 +346,191 @@ ia64_tlb_init (void)
 	local_cpu_data->ptce_stride[1] = ptce_info.stride[1];
 
 	local_flush_tlb_all();	/* nuke left overs from bootstrapping... */
+	status = ia64_pal_vm_summary(&vm_info_1, &vm_info_2);
+
+	if (status) {
+		printk(KERN_ERR "ia64_pal_vm_summary=%ld\n", status);
+		per_cpu(ia64_tr_num, cpu) = 8;
+		return;
+	}
+	per_cpu(ia64_tr_num, cpu) = vm_info_1.pal_vm_info_1_s.max_itr_entry+1;
+	if (per_cpu(ia64_tr_num, cpu) >
+				(vm_info_1.pal_vm_info_1_s.max_dtr_entry+1))
+		per_cpu(ia64_tr_num, cpu) =
+				vm_info_1.pal_vm_info_1_s.max_dtr_entry+1;
+	if (per_cpu(ia64_tr_num, cpu) > IA64_TR_ALLOC_MAX) {
+		per_cpu(ia64_tr_num, cpu) = IA64_TR_ALLOC_MAX;
+		printk(KERN_DEBUG "TR register number exceeds IA64_TR_ALLOC_MAX!"
+			"IA64_TR_ALLOC_MAX should be extended\n");
+	}
+}
+
+/*
+ * is_tr_overlap
+ *
+ * Check overlap with inserted TRs.
+ */
+static int is_tr_overlap(struct ia64_tr_entry *p, u64 va, u64 log_size)
+{
+	u64 tr_log_size;
+	u64 tr_end;
+	u64 va_rr = ia64_get_rr(va);
+	u64 va_rid = RR_TO_RID(va_rr);
+	u64 va_end = va + (1<<log_size) - 1;
+
+	if (va_rid != RR_TO_RID(p->rr))
+		return 0;
+	tr_log_size = (p->itir & 0xff) >> 2;
+	tr_end = p->ifa + (1<<tr_log_size) - 1;
+
+	if (va > tr_end || p->ifa > va_end)
+		return 0;
+	return 1;
+
+}
+
+/*
+ * ia64_insert_tr in virtual mode. Allocate a TR slot
+ *
+ * target_mask : 0x1 : itr, 0x2 : dtr, 0x3 : idtr
+ *
+ * va 	: virtual address.
+ * pte 	: pte entries inserted.
+ * log_size: range to be covered.
+ *
+ * Return value:  <0 :  error No.
+ *
+ *		  >=0 : slot number allocated for TR.
+ * Must be called with preemption disabled.
+ */
+int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size)
+{
+	int i, r;
+	unsigned long psr;
+	struct ia64_tr_entry *p;
+	int cpu = smp_processor_id();
+
+	r = -EINVAL;
+	/*Check overlap with existing TR entries*/
+	if (target_mask & 0x1) {
+		p = &__per_cpu_idtrs[cpu][0][0];
+		for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
+								i++, p++) {
+			if (p->pte & 0x1)
+				if (is_tr_overlap(p, va, log_size)) {
+					printk(KERN_DEBUG "Overlapped Entry"
+						"Inserted for TR Reigster!!\n");
+					goto out;
+			}
+		}
+	}
+	if (target_mask & 0x2) {
+		p = &__per_cpu_idtrs[cpu][1][0];
+		for (i = IA64_TR_ALLOC_BASE; i <= per_cpu(ia64_tr_used, cpu);
+								i++, p++) {
+			if (p->pte & 0x1)
+				if (is_tr_overlap(p, va, log_size)) {
+					printk(KERN_DEBUG "Overlapped Entry"
+						"Inserted for TR Reigster!!\n");
+					goto out;
+				}
+		}
+	}
+
+	for (i = IA64_TR_ALLOC_BASE; i < per_cpu(ia64_tr_num, cpu); i++) {
+		switch (target_mask & 0x3) {
+		case 1:
+			if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1))
+				goto found;
+			continue;
+		case 2:
+			if (!(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+				goto found;
+			continue;
+		case 3:
+			if (!(__per_cpu_idtrs[cpu][0][i].pte & 0x1) &&
+				!(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+				goto found;
+			continue;
+		default:
+			r = -EINVAL;
+			goto out;
+		}
+	}
+found:
+	if (i >= per_cpu(ia64_tr_num, cpu))
+		return -EBUSY;
+
+	/*Record tr info for mca hander use!*/
+	if (i > per_cpu(ia64_tr_used, cpu))
+		per_cpu(ia64_tr_used, cpu) = i;
+
+	psr = ia64_clear_ic();
+	if (target_mask & 0x1) {
+		ia64_itr(0x1, i, va, pte, log_size);
+		ia64_srlz_i();
+		p = &__per_cpu_idtrs[cpu][0][i];
+		p->ifa = va;
+		p->pte = pte;
+		p->itir = log_size << 2;
+		p->rr = ia64_get_rr(va);
+	}
+	if (target_mask & 0x2) {
+		ia64_itr(0x2, i, va, pte, log_size);
+		ia64_srlz_i();
+		p = &__per_cpu_idtrs[cpu][1][i];
+		p->ifa = va;
+		p->pte = pte;
+		p->itir = log_size << 2;
+		p->rr = ia64_get_rr(va);
+	}
+	ia64_set_psr(psr);
+	r = i;
+out:
+	return r;
+}
+EXPORT_SYMBOL_GPL(ia64_itr_entry);
+
+/*
+ * ia64_purge_tr
+ *
+ * target_mask: 0x1: purge itr, 0x2 : purge dtr, 0x3 purge idtr.
+ * slot: slot number to be freed.
+ *
+ * Must be called with preemption disabled.
+ */
+void ia64_ptr_entry(u64 target_mask, int slot)
+{
+	int cpu = smp_processor_id();
+	int i;
+	struct ia64_tr_entry *p;
+
+	if (slot < IA64_TR_ALLOC_BASE || slot >= per_cpu(ia64_tr_num, cpu))
+		return;
+
+	if (target_mask & 0x1) {
+		p = &__per_cpu_idtrs[cpu][0][slot];
+		if ((p->pte&0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
+			p->pte = 0;
+			ia64_ptr(0x1, p->ifa, p->itir>>2);
+			ia64_srlz_i();
+		}
+	}
+
+	if (target_mask & 0x2) {
+		p = &__per_cpu_idtrs[cpu][1][slot];
+		if ((p->pte & 0x1) && is_tr_overlap(p, p->ifa, p->itir>>2)) {
+			p->pte = 0;
+			ia64_ptr(0x2, p->ifa, p->itir>>2);
+			ia64_srlz_i();
+		}
+	}
+
+	for (i = per_cpu(ia64_tr_used, cpu); i >= IA64_TR_ALLOC_BASE; i--) {
+		if ((__per_cpu_idtrs[cpu][0][i].pte & 0x1) ||
+				(__per_cpu_idtrs[cpu][1][i].pte & 0x1))
+			break;
+	}
+	per_cpu(ia64_tr_used, cpu) = i;
 }
+EXPORT_SYMBOL_GPL(ia64_ptr_entry);
diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c
index 245dc1fedc24..f5959c0c1810 100644
--- a/arch/ia64/pci/fixup.c
+++ b/arch/ia64/pci/fixup.c
@@ -63,7 +63,7 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev)
 	pci_read_config_word(pdev, PCI_COMMAND, &config);
 	if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 		pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW;
-		printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev));
+		dev_printk(KERN_DEBUG, &pdev->dev, "Boot video device\n");
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video);
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 8fd7e825192b..77b15f80f101 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -362,7 +362,12 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	info.name = name;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
 			&info);
-
+	/*
+	 * See arch/x86/pci/acpi.c.
+	 * The desired pci bus might already be scanned in a quirk. We
+	 * should handle the case here, but it appears that IA64 hasn't
+	 * such quirk. So we just ignore the case now.
+	 */
 	pbus = pci_scan_bus_parented(NULL, bus, &pci_root_ops, controller);
 	if (pbus)
 		pcibios_setup_root_windows(pbus, controller);
@@ -499,54 +504,12 @@ pcibios_update_irq (struct pci_dev *dev, int irq)
 	/* ??? FIXME -- record old value for shutdown.  */
 }
 
-static inline int
-pcibios_enable_resources (struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-	unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-
-	if (!dev)
-		return -EINVAL;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the desired resources.  */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & type_mask))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR
-			       "PCI: Device %s not available because of resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 int
 pcibios_enable_device (struct pci_dev *dev, int mask)
 {
 	int ret;
 
-	ret = pcibios_enable_resources(dev, mask);
+	ret = pci_enable_resources(dev, mask);
 	if (ret < 0)
 		return ret;
 
@@ -765,7 +728,7 @@ static void __init set_pci_cacheline_size(void)
 	status = ia64_pal_cache_summary(&levels, &unique_caches);
 	if (status != 0) {
 		printk(KERN_ERR "%s: ia64_pal_cache_summary() failed "
-			"(status=%ld)\n", __FUNCTION__, status);
+			"(status=%ld)\n", __func__, status);
 		return;
 	}
 
@@ -773,7 +736,7 @@ static void __init set_pci_cacheline_size(void)
 				/* cache_type (data_or_unified)= */ 2, &cci);
 	if (status != 0) {
 		printk(KERN_ERR "%s: ia64_pal_cache_config_info() failed "
-			"(status=%ld)\n", __FUNCTION__, status);
+			"(status=%ld)\n", __func__, status);
 		return;
 	}
 	pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
diff --git a/arch/ia64/sn/kernel/huberror.c b/arch/ia64/sn/kernel/huberror.c
index b663168da55c..0101c7924a4d 100644
--- a/arch/ia64/sn/kernel/huberror.c
+++ b/arch/ia64/sn/kernel/huberror.c
@@ -37,7 +37,7 @@ static irqreturn_t hub_eint_handler(int irq, void *arg)
 			(u64) nasid, 0, 0, 0, 0, 0, 0);
 
 		if ((int)ret_stuff.v0)
-			panic("%s: Fatal %s Error", __FUNCTION__,
+			panic("%s: Fatal %s Error", __func__,
 				((nasid & 1) ? "TIO" : "HUBII"));
 
 		if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
@@ -48,7 +48,7 @@ static irqreturn_t hub_eint_handler(int irq, void *arg)
 				(u64) nasid, 0, 0, 0, 0, 0, 0);
 
 			if ((int)ret_stuff.v0)
-				panic("%s: Fatal TIO Error", __FUNCTION__);
+				panic("%s: Fatal TIO Error", __func__);
 		} else
 			bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
 
diff --git a/arch/ia64/sn/kernel/io_acpi_init.c b/arch/ia64/sn/kernel/io_acpi_init.c
index 3c7178f5dce8..6568942a95f0 100644
--- a/arch/ia64/sn/kernel/io_acpi_init.c
+++ b/arch/ia64/sn/kernel/io_acpi_init.c
@@ -133,7 +133,7 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR "%s: "
 		       "acpi_get_vendor_resource() failed (0x%x) for: ",
-		       __FUNCTION__, status);
+		       __func__, status);
 		acpi_ns_print_node_pathname(handle, NULL);
 		printk("\n");
 		return NULL;
@@ -145,7 +145,7 @@ sn_get_bussoft_ptr(struct pci_bus *bus)
 	     sizeof(struct pcibus_bussoft *)) {
 		printk(KERN_ERR
 		       "%s: Invalid vendor data length %d\n",
-			__FUNCTION__, vendor->byte_length);
+			__func__, vendor->byte_length);
 		kfree(buffer.pointer);
 		return NULL;
 	}
@@ -184,7 +184,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR
 		       "%s: acpi_get_vendor_resource() failed (0x%x) for: ",
-		        __FUNCTION__, status);
+		        __func__, status);
 		acpi_ns_print_node_pathname(handle, NULL);
 		printk("\n");
 		return 1;
@@ -196,7 +196,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 	    sizeof(struct pci_devdev_info *)) {
 		printk(KERN_ERR
 		       "%s: Invalid vendor data length: %d for: ",
-		        __FUNCTION__, vendor->byte_length);
+		        __func__, vendor->byte_length);
 		acpi_ns_print_node_pathname(handle, NULL);
 		printk("\n");
 		ret = 1;
@@ -205,7 +205,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 
 	pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
 	if (!pcidev_ptr)
-		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+		panic("%s: Unable to alloc memory for pcidev_info", __func__);
 
 	memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
 	pcidev_prom_ptr = __va(addr);
@@ -214,7 +214,7 @@ sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
 	/* Get the IRQ info */
 	irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
 	if (!irq_info)
-		 panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+		 panic("%s: Unable to alloc memory for sn_irq_info", __func__);
 
 	if (pcidev_ptr->pdi_sn_irq_info) {
 		irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
@@ -249,10 +249,10 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 		status = acpi_get_parent(child, &parent);
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR "%s: acpi_get_parent() failed "
-			       "(0x%x) for: ", __FUNCTION__, status);
+			       "(0x%x) for: ", __func__, status);
 			acpi_ns_print_node_pathname(child, NULL);
 			printk("\n");
-			panic("%s: Unable to find host devfn\n", __FUNCTION__);
+			panic("%s: Unable to find host devfn\n", __func__);
 		}
 		if (parent == rootbus_handle)
 			break;
@@ -260,7 +260,7 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 	}
 	if (!child) {
 		printk(KERN_ERR "%s: Unable to find root bus for: ",
-		       __FUNCTION__);
+		       __func__);
 		acpi_ns_print_node_pathname(device_handle, NULL);
 		printk("\n");
 		BUG();
@@ -269,10 +269,10 @@ get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
 	status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
 	if (ACPI_FAILURE(status)) {
 		printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ",
-		       __FUNCTION__, status);
+		       __func__, status);
 		acpi_ns_print_node_pathname(child, NULL);
 		printk("\n");
-		panic("%s: Unable to find host devfn\n", __FUNCTION__);
+		panic("%s: Unable to find host devfn\n", __func__);
 	}
 
 	slot = (adr >> 16) & 0xffff;
@@ -308,7 +308,7 @@ find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR
 			       "%s: acpi_get_parent() failed (0x%x) for: ",
-					__FUNCTION__, status);
+					__func__, status);
 			acpi_ns_print_node_pathname(handle, NULL);
 			printk("\n");
 			return AE_OK;
@@ -318,7 +318,7 @@ find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR
 			  "%s: Failed to find _BBN in parent of: ",
-					__FUNCTION__);
+					__func__);
 			acpi_ns_print_node_pathname(handle, NULL);
 			printk("\n");
 			return AE_OK;
@@ -358,14 +358,14 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
 		if (segment != pci_domain_nr(dev)) {
 			printk(KERN_ERR
 			       "%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
-			       __FUNCTION__, segment, pci_domain_nr(dev));
+			       __func__, segment, pci_domain_nr(dev));
 			acpi_ns_print_node_pathname(rootbus_handle, NULL);
 			printk("\n");
 			return 1;
 		}
 	} else {
 		printk(KERN_ERR "%s: Unable to get __SEG from: ",
-		       __FUNCTION__);
+		       __func__);
 		acpi_ns_print_node_pathname(rootbus_handle, NULL);
 		printk("\n");
 		return 1;
@@ -386,7 +386,7 @@ sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
 	if (!pcidev_match.handle) {
 		printk(KERN_ERR
 		       "%s: Could not find matching ACPI device for %s.\n",
-		       __FUNCTION__, pci_name(dev));
+		       __func__, pci_name(dev));
 		return 1;
 	}
 
@@ -422,7 +422,7 @@ sn_acpi_slot_fixup(struct pci_dev *dev)
 
 	if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
 		panic("%s:  Failure obtaining pcidev_info for %s\n",
-		      __FUNCTION__, pci_name(dev));
+		      __func__, pci_name(dev));
 	}
 
 	if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
@@ -463,7 +463,7 @@ sn_acpi_bus_fixup(struct pci_bus *bus)
 			printk(KERN_ERR
 			       "%s: 0x%04x:0x%02x Unable to "
 			       "obtain prom_bussoft_ptr\n",
-			       __FUNCTION__, pci_domain_nr(bus), bus->number);
+			       __func__, pci_domain_nr(bus), bus->number);
 			return;
 		}
 		sn_common_bus_fixup(bus, prom_bussoft_ptr);
diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c
index c4eb84f9e781..8a924a5661dd 100644
--- a/arch/ia64/sn/kernel/io_common.c
+++ b/arch/ia64/sn/kernel/io_common.c
@@ -364,7 +364,7 @@ void sn_bus_store_sysdata(struct pci_dev *dev)
 
 	element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
 	if (!element) {
-		dev_dbg(&dev->dev, "%s: out of memory!\n", __FUNCTION__);
+		dev_dbg(&dev->dev, "%s: out of memory!\n", __func__);
 		return;
 	}
 	element->sysdata = SN_PCIDEV_INFO(dev);
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 906b93674b76..c3aa851d1ca6 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -209,11 +209,11 @@ sn_io_slot_fixup(struct pci_dev *dev)
 
 	pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
 	if (!pcidev_info)
-		panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+		panic("%s: Unable to alloc memory for pcidev_info", __func__);
 
 	sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
 	if (!sn_irq_info)
-		panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+		panic("%s: Unable to alloc memory for sn_irq_info", __func__);
 
 	/* Call to retrieve pci device information needed by kernel. */
 	status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
diff --git a/arch/ia64/sn/kernel/mca.c b/arch/ia64/sn/kernel/mca.c
index 868c9aa64fe2..27793f7aa99c 100644
--- a/arch/ia64/sn/kernel/mca.c
+++ b/arch/ia64/sn/kernel/mca.c
@@ -100,7 +100,7 @@ sn_platform_plat_specific_err_print(const u8 * sect_header, u8 ** oemdata,
 		if (!newbuf) {
 			mutex_unlock(&sn_oemdata_mutex);
 			printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
-			       __FUNCTION__);
+			       __func__);
 			return 1;
 		}
 		vfree(*sn_oemdata);
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 4b0d1538e7e5..8cc0c4753d89 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -37,7 +37,6 @@
 
 #include <asm/processor.h>
 #include <asm/topology.h>
-#include <asm/semaphore.h>
 #include <asm/uaccess.h>
 #include <asm/sal.h>
 #include <asm/sn/io.h>
diff --git a/arch/ia64/sn/kernel/xpc_main.c b/arch/ia64/sn/kernel/xpc_main.c
index 81785b78bc1e..9e0b164da9c2 100644
--- a/arch/ia64/sn/kernel/xpc_main.c
+++ b/arch/ia64/sn/kernel/xpc_main.c
@@ -199,7 +199,7 @@ xpc_timeout_partition_disengage_request(unsigned long data)
 	struct xpc_partition *part = (struct xpc_partition *) data;
 
 
-	DBUG_ON(jiffies < part->disengage_request_timeout);
+	DBUG_ON(time_before(jiffies, part->disengage_request_timeout));
 
 	(void) xpc_partition_disengaged(part);
 
@@ -230,7 +230,7 @@ xpc_hb_beater(unsigned long dummy)
 {
 	xpc_vars->heartbeat++;
 
-	if (jiffies >= xpc_hb_check_timeout) {
+	if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
 		wake_up_interruptible(&xpc_act_IRQ_wq);
 	}
 
@@ -270,7 +270,7 @@ xpc_hb_checker(void *ignore)
 
 
 		/* checking of remote heartbeats is skewed by IRQ handling */
-		if (jiffies >= xpc_hb_check_timeout) {
+		if (time_after_eq(jiffies, xpc_hb_check_timeout)) {
 			dev_dbg(xpc_part, "checking remote heartbeats\n");
 			xpc_check_remote_hb();
 
@@ -305,7 +305,7 @@ xpc_hb_checker(void *ignore)
 		/* wait for IRQ or timeout */
 		(void) wait_event_interruptible(xpc_act_IRQ_wq,
 			    (last_IRQ_count < atomic_read(&xpc_act_IRQ_rcvd) ||
-					jiffies >= xpc_hb_check_timeout ||
+					time_after_eq(jiffies, xpc_hb_check_timeout) ||
 						(volatile int) xpc_exiting));
 	}
 
diff --git a/arch/ia64/sn/kernel/xpc_partition.c b/arch/ia64/sn/kernel/xpc_partition.c
index 7ba403232cb8..9e97c2684832 100644
--- a/arch/ia64/sn/kernel/xpc_partition.c
+++ b/arch/ia64/sn/kernel/xpc_partition.c
@@ -877,7 +877,7 @@ xpc_partition_disengaged(struct xpc_partition *part)
 	disengaged = (xpc_partition_engaged(1UL << partid) == 0);
 	if (part->disengage_request_timeout) {
 		if (!disengaged) {
-			if (jiffies < part->disengage_request_timeout) {
+			if (time_before(jiffies, part->disengage_request_timeout)) {
 				/* timelimit hasn't been reached yet */
 				return 0;
 			}
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 511db2fd7bff..18b94b792d54 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -116,7 +116,7 @@ void *sn_dma_alloc_coherent(struct device *dev, size_t size,
 	*dma_handle = provider->dma_map_consistent(pdev, phys_addr, size,
 						   SN_DMA_ADDR_PHYS);
 	if (!*dma_handle) {
-		printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+		printk(KERN_ERR "%s: out of ATEs\n", __func__);
 		free_pages((unsigned long)cpuaddr, get_order(size));
 		return NULL;
 	}
@@ -179,7 +179,7 @@ dma_addr_t sn_dma_map_single(struct device *dev, void *cpu_addr, size_t size,
 	phys_addr = __pa(cpu_addr);
 	dma_addr = provider->dma_map(pdev, phys_addr, size, SN_DMA_ADDR_PHYS);
 	if (!dma_addr) {
-		printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+		printk(KERN_ERR "%s: out of ATEs\n", __func__);
 		return 0;
 	}
 	return dma_addr;
@@ -266,7 +266,7 @@ int sn_dma_map_sg(struct device *dev, struct scatterlist *sgl, int nhwentries,
 						    SN_DMA_ADDR_PHYS);
 
 		if (!sg->dma_address) {
-			printk(KERN_ERR "%s: out of ATEs\n", __FUNCTION__);
+			printk(KERN_ERR "%s: out of ATEs\n", __func__);
 
 			/*
 			 * Free any successfully allocated entries.
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index ef048a674772..529462c01570 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -88,7 +88,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 		break;
 	default:
 		printk(KERN_ERR "%s:  Invalid CA_APERATURE_SIZE "
-		       "0x%lx\n", __FUNCTION__, (ulong) CA_APERATURE_SIZE);
+		       "0x%lx\n", __func__, (ulong) CA_APERATURE_SIZE);
 		return -1;
 	}
 
@@ -124,7 +124,7 @@ tioca_gart_init(struct tioca_kernel *tioca_kern)
 	if (!tmp) {
 		printk(KERN_ERR "%s:  Could not allocate "
 		       "%lu bytes (order %d) for GART\n",
-		       __FUNCTION__,
+		       __func__,
 		       tioca_kern->ca_gart_size,
 		       get_order(tioca_kern->ca_gart_size));
 		return -ENOMEM;
@@ -341,7 +341,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
 
 	if (node_upper > 64) {
 		printk(KERN_ERR "%s:  coretalk addr 0x%p node id out "
-		       "of range\n", __FUNCTION__, (void *)ct_addr);
+		       "of range\n", __func__, (void *)ct_addr);
 		return 0;
 	}
 
@@ -349,7 +349,7 @@ tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
 	if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
 		printk(KERN_ERR "%s:  coretalk upper node (%u) "
 		       "mismatch with ca_agp_dma_addr_extn (%lu)\n",
-		       __FUNCTION__,
+		       __func__,
 		       node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT));
 		return 0;
 	}
@@ -597,7 +597,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 	if (is_shub1() && sn_sal_rev() < 0x0406) {
 		printk
 		    (KERN_ERR "%s:  SGI prom rev 4.06 or greater required "
-		     "for tioca support\n", __FUNCTION__);
+		     "for tioca support\n", __func__);
 		return NULL;
 	}
 
@@ -651,7 +651,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		printk(KERN_WARNING
 		       "%s:  Unable to get irq %d.  "
 		       "Error interrupts won't be routed for TIOCA bus %d\n",
-		       __FUNCTION__, SGI_TIOCA_ERROR,
+		       __func__, SGI_TIOCA_ERROR,
 		       (int)tioca_common->ca_common.bs_persist_busnum);
 
 	sn_set_err_irq_affinity(SGI_TIOCA_ERROR);
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index 999f14f986e2..9b3c11373022 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -494,7 +494,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
 		if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
 			printk(KERN_WARNING
 			       "%s:  %s - no map found for bus_addr 0x%lx\n",
-			       __FUNCTION__, pci_name(pdev), bus_addr);
+			       __func__, pci_name(pdev), bus_addr);
 		} else if (--map->refcnt == 0) {
 			for (i = 0; i < map->ate_count; i++) {
 				map->ate_shadow[i] = 0;
@@ -1030,7 +1030,7 @@ tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
 		       "%s:  Unable to get irq %d.  "
 		       "Error interrupts won't be routed for "
 		       "TIOCE bus %04x:%02x\n",
-		       __FUNCTION__, SGI_PCIASIC_ERROR,
+		       __func__, SGI_PCIASIC_ERROR,
 		       tioce_common->ce_pcibus.bs_persist_segment,
 		       tioce_common->ce_pcibus.bs_persist_busnum);
 
diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile
index e97e26e87c9e..09200d4886e3 100644
--- a/arch/m32r/kernel/Makefile
+++ b/arch/m32r/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y	:= head.o init_task.o vmlinux.lds
 
 obj-y	:= process.o entry.o traps.o align.o irq.o setup.o time.o \
-	m32r_ksyms.o sys_m32r.o semaphore.o signal.o ptrace.o
+	m32r_ksyms.o sys_m32r.o signal.o ptrace.o
 
 obj-$(CONFIG_SMP)		+= smp.o smpboot.o
 obj-$(CONFIG_MODULES)		+= module.o
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 41a4c95e06d6..e6709fe950ba 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -7,7 +7,6 @@
 #include <linux/interrupt.h>
 #include <linux/string.h>
 
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
@@ -22,10 +21,6 @@ EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(iounmap);
 EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down_trylock);
 
 /* Networking helper routines. */
 /* Delay loops */
diff --git a/arch/m32r/kernel/semaphore.c b/arch/m32r/kernel/semaphore.c
deleted file mode 100644
index 940c2d37cfd1..000000000000
--- a/arch/m32r/kernel/semaphore.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *  linux/arch/m32r/semaphore.c
- *    orig : i386 2.6.4
- *
- *  M32R semaphore implementation.
- *
- *	Copyright (c) 2002 - 2004 Hitoshi Yamamoto
- */
-
-/*
- * i386 semaphore implementation.
- *
- * (C) Copyright 1999 Linus Torvalds
- *
- * Portions Copyright 1999 Red Hat, Inc.
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License
- *	as published by the Free Software Foundation; either version
- *	2 of the License, or (at your option) any later version.
- *
- * rw semaphores implemented November 1999 by Benjamin LaHaise <bcrl@kvack.org>
- */
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is protected
- * by the spinlock in the semaphore's waitqueue head.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- *  - only on a boundary condition do we need to care. When we go
- *    from a negative count to a non-negative, we wake people up.
- *  - when we go from a non-negative count to a negative do we
- *    (a) synchronize with the "sleeper" count and (b) make sure
- *    that we're on the wakeup list before we synchronize so that
- *    we cannot lose wakeup events.
- */
-
-asmlinkage void __up(struct semaphore *sem)
-{
-	wake_up(&sem->wait);
-}
-
-asmlinkage void __sched __down(struct semaphore * sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	unsigned long flags;
-
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	spin_lock_irqsave(&sem->wait.lock, flags);
-	add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
-	sem->sleepers++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock in
-		 * the wait_queue_head.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-		schedule();
-
-		spin_lock_irqsave(&sem->wait.lock, flags);
-		tsk->state = TASK_UNINTERRUPTIBLE;
-	}
-	remove_wait_queue_locked(&sem->wait, &wait);
-	wake_up_locked(&sem->wait);
-	spin_unlock_irqrestore(&sem->wait.lock, flags);
-	tsk->state = TASK_RUNNING;
-}
-
-asmlinkage int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	unsigned long flags;
-
-	tsk->state = TASK_INTERRUPTIBLE;
-	spin_lock_irqsave(&sem->wait.lock, flags);
-	add_wait_queue_exclusive_locked(&sem->wait, &wait);
-
-	sem->sleepers++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * With signals pending, this turns into
-		 * the trylock failure case - we won't be
-		 * sleeping, and we* can't get the lock as
-		 * it has contention. Just correct the count
-		 * and exit.
-		 */
-		if (signal_pending(current)) {
-			retval = -EINTR;
-			sem->sleepers = 0;
-			atomic_add(sleepers, &sem->count);
-			break;
-		}
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock in
-		 * wait_queue_head. The "-1" is because we're
-		 * still hoping to get the semaphore.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-		schedule();
-
-		spin_lock_irqsave(&sem->wait.lock, flags);
-		tsk->state = TASK_INTERRUPTIBLE;
-	}
-	remove_wait_queue_locked(&sem->wait, &wait);
-	wake_up_locked(&sem->wait);
-	spin_unlock_irqrestore(&sem->wait.lock, flags);
-
-	tsk->state = TASK_RUNNING;
-	return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- *
- * We could have done the trylock with a
- * single "cmpxchg" without failure cases,
- * but then it wouldn't work on a 386.
- */
-asmlinkage int __down_trylock(struct semaphore * sem)
-{
-	int sleepers;
-	unsigned long flags;
-
-	spin_lock_irqsave(&sem->wait.lock, flags);
-	sleepers = sem->sleepers + 1;
-	sem->sleepers = 0;
-
-	/*
-	 * Add "everybody else" and us into it. They aren't
-	 * playing, because we own the spinlock in the
-	 * wait_queue_head.
-	 */
-	if (!atomic_add_negative(sleepers, &sem->count)) {
-		wake_up_locked(&sem->wait);
-	}
-
-	spin_unlock_irqrestore(&sem->wait.lock, flags);
-	return 1;
-}
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index 2cba605cb59d..b15173f28a23 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,6 +13,8 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
+KBUILD_DEFCONFIG := amiga_defconfig
+
 # override top level makefile
 AS += -m68020
 LDFLAGS := -m m68kelf
diff --git a/arch/m68k/atari/stram.c b/arch/m68k/atari/stram.c
index 0055a6c06f75..04c69ffbea71 100644
--- a/arch/m68k/atari/stram.c
+++ b/arch/m68k/atari/stram.c
@@ -29,7 +29,6 @@
 #include <asm/atarihw.h>
 #include <asm/atari_stram.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 
 #undef DEBUG
 
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5649fbae430e..e41958371367 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:23 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:06 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-amiga"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -97,47 +159,288 @@ CONFIG_AMIGA_PCMCIA=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_ZORRO_NAMES=y
 
 #
-# Device Drivers
+# Networking
 #
+CONFIG_NET=y
 
 #
-# Generic Driver Options
+# Networking options
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
-# Memory Technology Devices (MTD)
+# IP: Netfilter Configuration
 #
-# CONFIG_MTD is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
-# Parallel port support
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
 CONFIG_PARPORT=m
 # CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
 CONFIG_PARPORT_AMIGA=m
 CONFIG_PARPORT_MFC3=m
 # CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
 CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
+CONFIG_PARPORT_NOT_PC=y
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 CONFIG_AMIGA_FLOPPY=y
 CONFIG_AMIGA_Z2RAM=y
-# CONFIG_PARIDE is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -145,56 +448,66 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_GAYLE=y
 CONFIG_BLK_DEV_IDEDOUBLER=y
 CONFIG_BLK_DEV_BUDDHA=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -206,6 +519,7 @@ CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -213,30 +527,34 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
-# CONFIG_SCSI_SPI_ATTRS is not set
+CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
@@ -244,243 +562,42 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_A3000_SCSI=y
 CONFIG_A2091_SCSI=y
 CONFIG_GVP11_SCSI=y
-CONFIG_CYBERSTORM_SCSI=y
-CONFIG_CYBERSTORMII_SCSI=y
-CONFIG_BLZ2060_SCSI=y
-CONFIG_BLZ1230_SCSI=y
-CONFIG_FASTLANE_SCSI=y
-CONFIG_OKTAGON_SCSI=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 CONFIG_ARIADNE=m
 CONFIG_A2065=m
 CONFIG_HYDRA=m
@@ -493,32 +610,24 @@ CONFIG_APNE=m
 # CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
-CONFIG_PLIP=m
+# CONFIG_PLIP is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
@@ -526,28 +635,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -557,7 +666,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -570,6 +678,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_AMIGA=y
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
@@ -577,7 +686,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
-CONFIG_MOUSE_AMIGA=y
+CONFIG_MOUSE_AMIGA=m
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -603,16 +712,16 @@ CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_TURBOGRAFX is not set
 CONFIG_JOYSTICK_AMIGA=m
 # CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -621,6 +730,7 @@ CONFIG_SERIO_SERPORT=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 CONFIG_A2232=m
 
@@ -638,94 +748,102 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-CONFIG_FB_CIRRUS=m
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
 CONFIG_FB_AMIGA=y
 CONFIG_FB_AMIGA_OCS=y
 CONFIG_FB_AMIGA_ECS=y
 CONFIG_FB_AMIGA_AGA=y
 CONFIG_FB_FM2=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_PEARL_8x8=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -733,27 +851,21 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_PAULA=m
 CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -768,10 +880,11 @@ CONFIG_MULTIFACE_III_TTY=m
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -782,25 +895,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -808,7 +925,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -827,19 +943,18 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
 #
 # CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=y
+CONFIG_AFFS_FS=m
 CONFIG_HFS_FS=m
 CONFIG_HFSPLUS_FS=m
 # CONFIG_BEFS_FS is not set
@@ -847,43 +962,39 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -894,10 +1005,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_AMIGA_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -938,35 +1045,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
@@ -975,9 +1089,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -986,20 +1112,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 63024b0b7ac3..e61196cd7fa5 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:27 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:07 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-apollo"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +155,11 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +169,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +191,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +391,154 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_APOLLO_ELPLUS=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_APOLLO_ELPLUS=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +578,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +590,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +610,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,90 +635,114 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# I2C support
+# Sonics Silicon Backplane
 #
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Dallas's 1-wire bus
+# Multifunction device drivers
 #
-# CONFIG_W1 is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Multimedia devices
+# Graphics support
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
 
 #
-# Digital Video Broadcasting Devices
+# Frame buffer hardware drivers
 #
-# CONFIG_DVB is not set
+CONFIG_FB_APOLLO=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -615,10 +755,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -629,25 +770,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -655,7 +800,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -674,13 +818,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -694,44 +837,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -741,10 +880,6 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -785,35 +920,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -822,9 +964,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -833,20 +987,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 6433da2d2ce2..ba7f971bb026 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:32 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:09 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-atari"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -94,166 +156,11 @@ CONFIG_BINFMT_MISC=m
 CONFIG_STRAM_PROC=y
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARPORT_NOT_PC=y
-CONFIG_PARPORT_ATARI=m
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_ATARI_FLOPPY=y
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_FALCON_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -263,10 +170,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -275,145 +189,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -421,46 +389,189 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_ATARILANCE=m
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_BLK_DEV=y
+CONFIG_ATARI_FLOPPY=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
-# Ethernet (1000 Mbit)
+# IDE chipset support/bugfixes
 #
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_FALCON_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# Ethernet (10000 Mbit)
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI Transports
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ATARILANCE=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PLIP is not set
 CONFIG_PPP=m
@@ -470,28 +581,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -501,7 +612,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -509,26 +619,37 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
+CONFIG_MOUSE_ATARI=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_M68K_BEEP=m
-CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PARKBD is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
@@ -540,6 +661,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -556,86 +678,97 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=m
 # CONFIG_LP_CONSOLE is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_ATY is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_ATARI=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
@@ -643,27 +776,21 @@ CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
 CONFIG_DMASOUND_ATARI=m
 CONFIG_DMASOUND=m
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -680,38 +807,44 @@ CONFIG_ATARI_DSP56K=m
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
+# CONFIG_REISERFS_PROC_INFO is not set
 # CONFIG_REISERFS_FS_XATTR is not set
 CONFIG_JFS_FS=m
 # CONFIG_JFS_POSIX_ACL is not set
 # CONFIG_JFS_SECURITY is not set
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
-
-#
-# XFS support
-#
+CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -719,7 +852,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -738,13 +870,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -758,42 +889,38 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
+CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -804,10 +931,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_ATARI_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -848,35 +971,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
@@ -885,9 +1015,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -896,20 +1038,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index da2a23a21463..ed98eff708c4 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:37 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:10 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-bvme6000"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@ CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +157,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,126 +193,186 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -376,13 +384,8 @@ CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -390,76 +393,186 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_BVME6000_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_BVME6000_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_BVME6000_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_FILTER=y
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -469,7 +582,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -482,11 +594,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -494,7 +614,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -505,6 +625,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -518,59 +639,56 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
-#
-
-#
-# I2C support
+# SPI support
 #
-# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -581,27 +699,20 @@ CONFIG_DUMMY_CONSOLE=y
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -614,10 +725,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +740,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -654,7 +770,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -673,13 +788,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -693,44 +807,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -740,10 +850,7 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +891,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +935,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -832,20 +958,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=m
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 51251883adf8..38b68c70e567 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:41 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:12 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-hp300"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -81,10 +129,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -94,134 +156,11 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -231,10 +170,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +192,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,46 +392,154 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_HPLANCE=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_HPLANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -440,28 +548,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -471,7 +579,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -484,19 +591,35 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_M68K_BEEP is not set
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -507,6 +630,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,90 +644,114 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# I2C support
+# Sonics Silicon Backplane
 #
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Dallas's 1-wire bus
+# Multifunction device drivers
 #
-# CONFIG_W1 is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Multimedia devices
+# Graphics support
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_COPYAREA is not set
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
 
 #
-# Digital Video Broadcasting Devices
+# Frame buffer hardware drivers
 #
-# CONFIG_DVB is not set
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -614,10 +762,11 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -628,25 +777,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -654,7 +807,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -673,13 +825,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -693,44 +844,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -740,10 +887,6 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -784,35 +927,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -821,9 +971,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -832,20 +994,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index ff9dffa5b860..738bca695a88 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:45 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:14 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mac"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -82,10 +130,24 @@ CONFIG_M68030=y
 CONFIG_M68040=y
 # CONFIG_M68060 is not set
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -95,171 +157,11 @@ CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 # CONFIG_HEARTBEAT is not set
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_MAC_IDE=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MAC_SCSI=y
-CONFIG_SCSI_MAC_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-CONFIG_ADB=y
-CONFIG_ADB_MACII=y
-CONFIG_ADB_MACIISI=y
-CONFIG_ADB_IOP=y
-CONFIG_ADB_PMU68K=y
-CONFIG_ADB_CUDA=y
-CONFIG_INPUT_ADBHID=y
-CONFIG_MAC_EMUMOUSEBTN=y
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -269,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 # CONFIG_IP_PNP is not set
 CONFIG_NET_IPIP=m
 CONFIG_NET_IPGRE=m
@@ -281,148 +190,202 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
 CONFIG_IPDDP=m
 CONFIG_IPDDP_ENCAP=y
 CONFIG_IPDDP_DECAP=y
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -430,80 +393,223 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-CONFIG_MAC8390=y
-CONFIG_MAC89x0=y
-CONFIG_MACSONIC=y
-CONFIG_MACMACE=y
-# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
 
 #
-# Ethernet (1000 Mbit)
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
 #
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_MAC_IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
-# Ethernet (10000 Mbit)
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
 #
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wan interfaces
+# SCSI Transports
 #
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MAC_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_MACIISI=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MAC8390=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
+CONFIG_MACMACE=y
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
 CONFIG_PPP_FILTER=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -513,7 +619,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -526,19 +631,29 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -549,6 +664,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -562,116 +678,117 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 CONFIG_FB_MACMODES=y
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_VALKYRIE=y
 CONFIG_FB_MAC=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_FONT_6x11=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_MAC_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -685,10 +802,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -699,25 +817,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -725,7 +847,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -744,13 +865,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -764,43 +884,39 @@ CONFIG_HFSPLUS_FS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-CONFIG_NCPFS_NFS_NS=y
-CONFIG_NCPFS_OS2_NS=y
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -808,27 +924,9 @@ CONFIG_CODA_FS=m
 #
 # Partition Types
 #
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_ATARI_PARTITION=y
+# CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-CONFIG_SUN_PARTITION=y
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -869,46 +967,65 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -917,20 +1034,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f0d5534f6830..f40b1724254b 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:50 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:17 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mvme147"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@ CONFIG_M68030=y
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,135 +157,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_MVME147_SCSI=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -231,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -246,145 +193,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -392,46 +393,155 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MVME147_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Ethernet (10000 Mbit)
+# SCSI support type (disk, tape, CD-ROM)
 #
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Token Ring devices
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI Transports
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME147_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MVME147_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -440,28 +550,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -471,7 +581,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -484,11 +593,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -496,7 +613,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -507,6 +624,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -520,112 +638,80 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
-#
-
-#
-# I2C support
+# SPI support
 #
-# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -638,10 +724,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -652,25 +739,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -678,7 +769,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -697,15 +787,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -719,44 +806,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -766,10 +849,7 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -810,35 +890,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -847,9 +934,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -858,20 +957,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 1d5c46ff3c81..e9ccc774334e 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:53 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:19 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-mvme16x"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -85,6 +133,22 @@ CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
 # CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -93,134 +157,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +171,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +193,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +393,156 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_MVME16x_NET=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Token Ring devices
+# SCSI support type (disk, tape, CD-ROM)
 #
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Wan interfaces
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_MVME16x_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MVME16x_NET=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
 #
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +551,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +582,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +594,19 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +614,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +625,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,116 +639,85 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
 
 #
-# TPM devices
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# I2C support
+# Sonics Silicon Backplane
 #
-# CONFIG_I2C is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
 #
+CONFIG_SERIAL167=y
 CONFIG_MVME162_SCC=y
 CONFIG_SERIAL_CONSOLE=y
 
@@ -637,10 +726,11 @@ CONFIG_SERIAL_CONSOLE=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -651,25 +741,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -677,7 +771,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -696,15 +789,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -718,44 +808,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -765,10 +851,7 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
+CONFIG_SYSV68_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -809,35 +892,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -846,9 +936,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -857,20 +959,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 856238634d42..165658fe73eb 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,63 +1,112 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:58 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:20 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-q40"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +129,24 @@ CONFIG_Q40=y
 CONFIG_M68040=y
 CONFIG_M68060=y
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -91,41 +154,282 @@ CONFIG_M68KFPU_EMU_EXTRAPREC=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
 CONFIG_PROC_HARDWARE=y
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
+# Networking
 #
+CONFIG_NET=y
 
 #
-# Generic Driver Options
+# Networking options
 #
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
-# Memory Technology Devices (MTD)
+# IP: Netfilter Configuration
 #
-# CONFIG_MTD is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# Parallel port support
+# IPv6: Netfilter Configuration
 #
-# CONFIG_PARPORT is not set
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# Plug and Play support
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
-# CONFIG_PNP is not set
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+# CONFIG_DEV_APPLETALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
-# Block devices
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
@@ -134,54 +438,64 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=m
 # CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_Q40IDE=y
-# CONFIG_IDE_CHIPSETS is not set
+
+#
+# Other IDE chipsets support
+#
+
+#
+# Note: most of these also require special kernel boot parameters
+#
+# CONFIG_BLK_DEV_4DRIVES is not set
+# CONFIG_BLK_DEV_ALI14XX is not set
+# CONFIG_BLK_DEV_DTC2278 is not set
+# CONFIG_BLK_DEV_HT6560B is not set
+# CONFIG_BLK_DEV_QD65XX is not set
+# CONFIG_BLK_DEV_UMC8672 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+CONFIG_RAID_ATTRS=m
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -189,10 +503,11 @@ CONFIG_SCSI_PROC_FS=y
 #
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
+CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -200,266 +515,71 @@ CONFIG_CHR_DEV_SG=m
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GENERIC_NCR5380 is not set
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
 CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
-CONFIG_ATALK=m
-# CONFIG_DEV_APPLETALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
 CONFIG_EQUALIZER=m
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+CONFIG_VETH=m
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
+# CONFIG_MII is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_NET_VENDOR_RACAL is not set
@@ -468,30 +588,21 @@ CONFIG_MII=m
 # CONFIG_HP100 is not set
 # CONFIG_NET_ISA is not set
 CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -500,28 +611,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -531,7 +642,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -544,22 +654,32 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
 
 #
 # Hardware I/O ports
 #
 CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_Q40KBD=m
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
@@ -571,6 +691,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -584,115 +705,117 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_Q40=y
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
-CONFIG_SOUND=y
-CONFIG_DMASOUND_Q40=y
-CONFIG_DMASOUND=y
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -703,10 +826,11 @@ CONFIG_DMASOUND=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -717,25 +841,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -743,7 +871,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -762,13 +889,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -782,44 +908,39 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -829,10 +950,6 @@ CONFIG_CODA_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -873,35 +990,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -910,9 +1034,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -921,20 +1057,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index af903b5c5708..bd2b9c4927c4 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:02 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:22 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+CONFIG_NO_DMA=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-sun3"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -69,10 +117,24 @@ CONFIG_SUN3=y
 #
 CONFIG_M68020=y
 CONFIG_MMU_SUN3=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_SINGLE_MEMORY_CHUNK=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -81,134 +143,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -218,10 +157,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -233,145 +179,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -379,47 +379,156 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_SUN3LANCE=y
-CONFIG_SUN3_82586=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wan interfaces
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3_SCSI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_SUN3LANCE=y
+CONFIG_SUN3_82586=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -428,28 +537,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -459,7 +568,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -472,11 +580,19 @@ CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -484,7 +600,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -495,6 +611,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -508,112 +625,113 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -624,10 +742,11 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -638,25 +757,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -664,7 +787,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -683,15 +805,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -705,44 +824,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -753,10 +868,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -797,35 +908,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -834,9 +952,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -845,20 +975,34 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 997143b7928a..f18154f1ef1f 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,63 +1,111 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:35:06 2005
+# Linux kernel version: 2.6.25-rc8
+# Wed Apr  2 20:46:23 2008
 #
 CONFIG_M68K=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION="-sun3x"
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
-CONFIG_AUDIT=y
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform dependent setup
@@ -80,10 +128,24 @@ CONFIG_M68030=y
 # CONFIG_M68040 is not set
 # CONFIG_M68060 is not set
 CONFIG_MMU_MOTOROLA=y
-CONFIG_M68KFPU_EMU=y
-CONFIG_M68KFPU_EMU_EXTRAPREC=y
-# CONFIG_M68KFPU_EMU_ONLY is not set
+# CONFIG_M68KFPU_EMU is not set
 # CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 
 #
 # General setup
@@ -92,135 +154,11 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 CONFIG_PROC_HARDWARE=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3X_ESP=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
 #
 CONFIG_NET=y
 
@@ -230,10 +168,17 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
@@ -245,145 +190,199 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
-
-#
-# IP: Virtual Server Configuration
-#
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_REALM=m
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
+CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_LIMIT=m
-CONFIG_IP6_NF_MATCH_MAC=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_FRAG=m
 CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_MARK=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
-CONFIG_IP6_NF_MATCH_LENGTH=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
 
 #
-# SCTP Configuration (EXPERIMENTAL)
+# DCCP CCIDs Configuration (EXPERIMENTAL)
 #
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 CONFIG_IP_SCTP=m
 # CONFIG_SCTP_DBG_MSG is not set
 # CONFIG_SCTP_DBG_OBJCNT is not set
 # CONFIG_SCTP_HMAC_NONE is not set
 # CONFIG_SCTP_HMAC_SHA1 is not set
 CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
-CONFIG_IPX=m
-# CONFIG_IPX_INTERN is not set
+# CONFIG_IPX is not set
 CONFIG_ATALK=m
 # CONFIG_DEV_APPLETALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
 
@@ -391,46 +390,155 @@ CONFIG_NET_CLS_ROUTE=y
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-CONFIG_EQUALIZER=m
-# CONFIG_TUN is not set
+# CONFIG_AF_RXRPC is not set
 
 #
-# Ethernet (10 or 100Mbit)
+# Wireless
 #
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_SUN3LANCE=y
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
-# Ethernet (1000 Mbit)
+# Device Drivers
 #
 
 #
-# Ethernet (10000 Mbit)
+# Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
-# Token Ring devices
+# SCSI device support
 #
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Wireless LAN (non-hamradio)
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_NET_RADIO is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Wan interfaces
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_SUN3LANCE=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -439,28 +547,28 @@ CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
 CONFIG_SLIP_SMART=y
 CONFIG_SLIP_MODE_SLIP6=y
-CONFIG_SHAPER=m
 CONFIG_NETCONSOLE=m
-
-#
-# ISDN subsystem
-#
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -470,7 +578,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -483,11 +590,19 @@ CONFIG_KEYBOARD_SUNKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -495,7 +610,7 @@ CONFIG_MOUSE_SERIAL=m
 # Hardware I/O ports
 #
 CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_LIBPS2=m
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
@@ -506,6 +621,7 @@ CONFIG_SERIO_LIBPS2=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -519,112 +635,113 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_GEN_RTC=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_GEN_RTC=m
 CONFIG_GEN_RTC_X=y
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+# CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
 #
-# Dallas's 1-wire bus
+# SPI support
 #
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Multimedia devices
+# Multifunction device drivers
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_MFD_SM501 is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia devices
 #
-# CONFIG_DVB is not set
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SOFT_CURSOR is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# InfiniBand support
+# Userspace I/O
 #
-# CONFIG_INFINIBAND is not set
+# CONFIG_UIO is not set
 
 #
 # Character devices
@@ -635,10 +752,11 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -649,25 +767,29 @@ CONFIG_JFS_FS=m
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_SECURITY is not set
 # CONFIG_XFS_POSIX_ACL is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+# CONFIG_XFS_RT is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_NOLOCK=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
@@ -675,7 +797,6 @@ CONFIG_AUTOFS4_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_ZISOFS=y
-CONFIG_ZISOFS_FS=y
 CONFIG_UDF_FS=m
 CONFIG_UDF_NLS=y
 
@@ -694,15 +815,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=m
 
 #
 # Miscellaneous filesystems
@@ -716,44 +834,40 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 CONFIG_HPFS_FS=m
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
-CONFIG_UFS_FS_WRITE=y
-
-#
-# Network File Systems
-#
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_SMB_NLS_REMOTE="cp437"
 # CONFIG_CIFS is not set
-CONFIG_NCP_FS=m
-# CONFIG_NCPFS_PACKET_SIGNING is not set
-# CONFIG_NCPFS_IOCTL_LOCKING is not set
-# CONFIG_NCPFS_STRONG is not set
-# CONFIG_NCPFS_NFS_NS is not set
-# CONFIG_NCPFS_OS2_NS is not set
-# CONFIG_NCPFS_SMALLDOS is not set
-CONFIG_NCPFS_NLS=y
-# CONFIG_NCPFS_EXTRAS is not set
+# CONFIG_NCP_FS is not set
 CONFIG_CODA_FS=m
 # CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
@@ -764,10 +878,6 @@ CONFIG_CODA_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -808,35 +918,42 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
-# CONFIG_FRAME_POINTER is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -845,9 +962,21 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
@@ -856,20 +985,35 @@ CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
deleted file mode 100644
index 7d935e48a9a8..000000000000
--- a/arch/m68k/defconfig
+++ /dev/null
@@ -1,657 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc6-m68k
-# Tue Jun  7 20:34:17 2005
-#
-CONFIG_M68K=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform dependent setup
-#
-# CONFIG_SUN3 is not set
-CONFIG_AMIGA=y
-# CONFIG_ATARI is not set
-# CONFIG_MAC is not set
-# CONFIG_APOLLO is not set
-# CONFIG_VME is not set
-# CONFIG_HP300 is not set
-# CONFIG_SUN3X is not set
-# CONFIG_Q40 is not set
-
-#
-# Processor type
-#
-CONFIG_M68020=y
-CONFIG_M68030=y
-CONFIG_M68040=y
-# CONFIG_M68060 is not set
-CONFIG_MMU_MOTOROLA=y
-# CONFIG_M68KFPU_EMU is not set
-# CONFIG_ADVANCED is not set
-
-#
-# General setup
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_ZORRO=y
-# CONFIG_AMIGA_PCMCIA is not set
-# CONFIG_HEARTBEAT is not set
-CONFIG_PROC_HARDWARE=y
-# CONFIG_ZORRO_NAMES is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_AMIGA_FLOPPY=y
-# CONFIG_AMIGA_Z2RAM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CDROM_PKTCDVD=y
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-CONFIG_A3000_SCSI=y
-CONFIG_A2091_SCSI=y
-CONFIG_GVP11_SCSI=y
-# CONFIG_CYBERSTORM_SCSI is not set
-# CONFIG_CYBERSTORMII_SCSI is not set
-# CONFIG_BLZ2060_SCSI is not set
-# CONFIG_BLZ1230_SCSI is not set
-# CONFIG_FASTLANE_SCSI is not set
-# CONFIG_OKTAGON_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_AMIGA is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_AMIGA is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_A2232 is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-CONFIG_FB_SOFT_CURSOR=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-CONFIG_FB_AMIGA=y
-CONFIG_FB_AMIGA_OCS=y
-CONFIG_FB_AMIGA_ECS=y
-CONFIG_FB_AMIGA_AGA=y
-# CONFIG_FB_FM2 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# Character devices
-#
-CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_MULTIFACE_III_TTY is not set
-# CONFIG_GVPIOEXT is not set
-# CONFIG_SERIAL_CONSOLE is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_AMIGA_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DEBUG_BUGVERBOSE=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index a806208c7fb5..7a62a718143b 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -10,7 +10,7 @@ endif
 extra-y	+= vmlinux.lds
 
 obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
-	   sys_m68k.o time.o semaphore.o setup.o m68k_ksyms.o devres.o
+	   sys_m68k.o time.o setup.o m68k_ksyms.o devres.o
 
 devres-y = ../../../kernel/irq/devres.o
 
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 6dfa3b3c0e2a..18a9c5f4b00d 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -742,7 +742,9 @@ sys_call_table:
 	.long sys_epoll_pwait		/* 315 */
 	.long sys_utimensat
 	.long sys_signalfd
-	.long sys_ni_syscall
+	.long sys_timerfd_create
 	.long sys_eventfd
 	.long sys_fallocate		/* 320 */
+	.long sys_timerfd_settime
+	.long sys_timerfd_gettime
 
diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c
index 6fc69c74fe2e..d900e77e5363 100644
--- a/arch/m68k/kernel/m68k_ksyms.c
+++ b/arch/m68k/kernel/m68k_ksyms.c
@@ -1,5 +1,4 @@
 #include <linux/module.h>
-#include <asm/semaphore.h>
 
 asmlinkage long long __ashldi3 (long long, int);
 asmlinkage long long __ashrdi3 (long long, int);
@@ -15,8 +14,3 @@ EXPORT_SYMBOL(__ashrdi3);
 EXPORT_SYMBOL(__lshrdi3);
 EXPORT_SYMBOL(__muldi3);
 
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
diff --git a/arch/m68k/kernel/semaphore.c b/arch/m68k/kernel/semaphore.c
deleted file mode 100644
index d12cbbfe6ebd..000000000000
--- a/arch/m68k/kernel/semaphore.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- *  Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	current->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		current->state = (task_state);	\
-	}					\
-	current->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int ret = 0;
-
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, current);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index 6bbf19f96007..a18af095cd7c 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -5,4 +5,4 @@
 EXTRA_AFLAGS := -traditional
 
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
-	   checksum.o string.o semaphore.o uaccess.o
+	   checksum.o string.o uaccess.o
diff --git a/arch/m68k/lib/semaphore.S b/arch/m68k/lib/semaphore.S
deleted file mode 100644
index 0215624c1602..000000000000
--- a/arch/m68k/lib/semaphore.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  linux/arch/m68k/lib/semaphore.S
- *
- *  Copyright (C) 1996  Linus Torvalds
- *
- *  m68k version by Andreas Schwab
- */
-
-#include <linux/linkage.h>
-#include <asm/semaphore.h>
-
-/*
- * The semaphore operations have a special calling sequence that
- * allow us to do a simpler in-line version of them. These routines
- * need to convert that sequence back into the C sequence when
- * there is contention on the semaphore.
- */
-ENTRY(__down_failed)
-	moveml %a0/%d0/%d1,-(%sp)
-	movel %a1,-(%sp)
-	jbsr __down
-	movel (%sp)+,%a1
-	moveml (%sp)+,%a0/%d0/%d1
-	rts
-
-ENTRY(__down_failed_interruptible)
-	movel %a0,-(%sp)
-	movel %d1,-(%sp)
-	movel %a1,-(%sp)
-	jbsr __down_interruptible
-	movel (%sp)+,%a1
-	movel (%sp)+,%d1
-	movel (%sp)+,%a0
-	rts
-
-ENTRY(__down_failed_trylock)
-	movel %a0,-(%sp)
-	movel %d1,-(%sp)
-	movel %a1,-(%sp)
-	jbsr __down_trylock
-	movel (%sp)+,%a1
-	movel (%sp)+,%d1
-	movel (%sp)+,%a0
-	rts
-
-ENTRY(__up_wakeup)
-	moveml %a0/%d0/%d1,-(%sp)
-	movel %a1,-(%sp)
-	jbsr __up
-	movel (%sp)+,%a1
-	moveml (%sp)+,%a0/%d0/%d1
-	rts
-
diff --git a/arch/m68k/sun3/intersil.c b/arch/m68k/sun3/intersil.c
index db359d7402a6..0116d208d300 100644
--- a/arch/m68k/sun3/intersil.c
+++ b/arch/m68k/sun3/intersil.c
@@ -15,7 +15,6 @@
 
 #include <asm/errno.h>
 #include <asm/system.h>
-#include <asm/semaphore.h>
 #include <asm/rtc.h>
 #include <asm/intersil.h>
 
diff --git a/arch/m68knommu/defconfig b/arch/m68knommu/defconfig
index 648113075f97..670b0a99cfa0 100644
--- a/arch/m68knommu/defconfig
+++ b/arch/m68knommu/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 13:17:38 2007
+# Linux kernel version: 2.6.25-rc3
+# Mon Feb 25 15:03:00 2008
 #
 CONFIG_M68K=y
 # CONFIG_MMU is not set
@@ -15,8 +15,10 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
 CONFIG_TIME_LOW_RES=y
 CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -31,12 +33,14 @@ CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_SYSFS_DEPRECATED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -48,15 +52,22 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
 # CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
 # CONFIG_EVENTFD is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -83,6 +94,8 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Processor type and features
@@ -121,6 +134,7 @@ CONFIG_M5272C3=y
 # CONFIG_MOD5272 is not set
 CONFIG_FREESCALE=y
 CONFIG_4KSTACKS=y
+CONFIG_HZ=100
 
 #
 # RAM configuration
@@ -147,6 +161,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -159,10 +174,6 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_FLAT=y
@@ -205,6 +216,7 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
@@ -229,10 +241,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -240,6 +248,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -283,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -339,10 +349,11 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -360,9 +371,15 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
@@ -377,7 +394,7 @@ CONFIG_FEC=y
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
 # CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
+CONFIG_PPP_ASYNC=y
 # CONFIG_PPP_SYNC_TTY is not set
 # CONFIG_PPP_DEFLATE is not set
 # CONFIG_PPP_BSDCOMP is not set
@@ -386,7 +403,6 @@ CONFIG_PPP=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -418,12 +434,16 @@ CONFIG_SLHC=y
 #
 # Non-8250 serial port support
 #
-CONFIG_SERIAL_COLDFIRE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
@@ -439,6 +459,14 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -450,20 +478,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -471,23 +499,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
 # Userspace I/O
 #
 # CONFIG_UIO is not set
@@ -505,11 +521,9 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -535,7 +549,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -551,42 +564,27 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -594,6 +592,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_FULLDEBUG is not set
 # CONFIG_HIGHPROFILE is not set
 # CONFIG_BOOTPARAM is not set
@@ -605,6 +604,7 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
diff --git a/arch/m68knommu/kernel/Makefile b/arch/m68knommu/kernel/Makefile
index 1524b39ad63f..f0eab3dedb5a 100644
--- a/arch/m68knommu/kernel/Makefile
+++ b/arch/m68knommu/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y := vmlinux.lds
 
 obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \
-	 semaphore.o setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
+	 setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o
 
 obj-$(CONFIG_MODULES)	+= module.o
 obj-$(CONFIG_COMEMPCI)	+= comempci.o
diff --git a/arch/m68knommu/kernel/m68k_ksyms.c b/arch/m68knommu/kernel/m68k_ksyms.c
index 53fad1490282..39fe0a7aec32 100644
--- a/arch/m68knommu/kernel/m68k_ksyms.c
+++ b/arch/m68knommu/kernel/m68k_ksyms.c
@@ -13,7 +13,6 @@
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/current.h>
 
@@ -39,11 +38,6 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memset);
 
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
 /*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
diff --git a/arch/m68knommu/kernel/semaphore.c b/arch/m68knommu/kernel/semaphore.c
deleted file mode 100644
index bce2bc7d87c6..000000000000
--- a/arch/m68knommu/kernel/semaphore.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- *  Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/sched.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <asm/semaphore-helper.h>
-
-#ifndef CONFIG_RMW_INSNS
-spinlock_t semaphore_wake_lock;
-#endif
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	current->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		current->state = (task_state);	\
-	}					\
-	current->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	DECLARE_WAITQUEUE(wait, current);
-	int ret = 0;
-
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, current);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 1b02b8820068..fca2e49917a3 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -336,9 +336,11 @@ ENTRY(sys_call_table)
 	.long sys_epoll_pwait		/* 315 */
 	.long sys_utimensat
 	.long sys_signalfd
-	.long sys_ni_syscall
+	.long sys_timerfd_create
 	.long sys_eventfd
 	.long sys_fallocate		/* 320 */
+	.long sys_timerfd_settime
+	.long sys_timerfd_gettime
 
 	.rept NR_syscalls-(.-sys_call_table)/4
 		.long sys_ni_syscall
diff --git a/arch/m68knommu/lib/Makefile b/arch/m68knommu/lib/Makefile
index e051a7913987..d94d709665aa 100644
--- a/arch/m68knommu/lib/Makefile
+++ b/arch/m68knommu/lib/Makefile
@@ -4,4 +4,4 @@
 
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o \
 	   muldi3.o mulsi3.o divsi3.o udivsi3.o modsi3.o umodsi3.o \
-	   checksum.o semaphore.o memcpy.o memset.o delay.o
+	   checksum.o memcpy.o memset.o delay.o
diff --git a/arch/m68knommu/lib/semaphore.S b/arch/m68knommu/lib/semaphore.S
deleted file mode 100644
index 87c746034376..000000000000
--- a/arch/m68knommu/lib/semaphore.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  linux/arch/m68k/lib/semaphore.S
- *
- *  Copyright (C) 1996  Linus Torvalds
- *
- *  m68k version by Andreas Schwab
- *
- *  MAR/1999 -- modified to support ColdFire (gerg@snapgear.com)
- */
-
-#include <linux/linkage.h>
-#include <asm/semaphore.h>
-
-/*
- * "down_failed" is called with the eventual return address
- * in %a0, and the address of the semaphore in %a1. We need
- * to increment the number of waiters on the semaphore,
- * call "__down()", and then eventually return to try again.
- */
-ENTRY(__down_failed)
-#ifdef CONFIG_COLDFIRE
-	subl #12,%sp
-	moveml %a0/%d0/%d1,(%sp)
-#else
-	moveml %a0/%d0/%d1,-(%sp)
-#endif
-	movel %a1,-(%sp)
-	jbsr __down
-	movel (%sp)+,%a1
-	movel (%sp)+,%d0
-	movel (%sp)+,%d1
-	rts
-
-ENTRY(__down_failed_interruptible)
-	movel %a0,-(%sp)
-	movel %d1,-(%sp)
-	movel %a1,-(%sp)
-	jbsr __down_interruptible
-	movel (%sp)+,%a1
-	movel (%sp)+,%d1
-	rts
-
-ENTRY(__up_wakeup)
-#ifdef CONFIG_COLDFIRE
-	subl #12,%sp
-	moveml %a0/%d0/%d1,(%sp)
-#else
-	moveml %a0/%d0/%d1,-(%sp)
-#endif
-	movel %a1,-(%sp)
-	jbsr __up
-	movel (%sp)+,%a1
-	movel (%sp)+,%d0
-	movel (%sp)+,%d1
-	rts
-
-ENTRY(__down_failed_trylock)
-	movel %a0,-(%sp)
-	movel %d1,-(%sp)
-	movel %a1,-(%sp)
-	jbsr __down_trylock
-	movel (%sp)+,%a1
-	movel (%sp)+,%d1
-	movel (%sp)+,%a0
-	rts
-
diff --git a/arch/m68knommu/platform/68328/timers.c b/arch/m68knommu/platform/68328/timers.c
index 9159fd05c9ac..6bafefa546e5 100644
--- a/arch/m68knommu/platform/68328/timers.c
+++ b/arch/m68knommu/platform/68328/timers.c
@@ -67,16 +67,6 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 
 /***************************************************************************/
 
-static irqreturn_t hw_tick(int irq, void *dummy)
-{
-	/* Reset Timer1 */
-	TSTAT &= 0;
-
-	return arch_timer_interrupt(irq, dummy);
-}
-
-/***************************************************************************/
-
 static struct irqaction m68328_timer_irq = {
 	.name	 = "timer",
 	.flags	 = IRQF_DISABLED | IRQF_TIMER,
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ade230d445d9..8724ed3298d3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1824,7 +1824,7 @@ choice
 	 Allows the configuration of the timer frequency.
 
 	config HZ_48
-		bool "48 HZ" if SYS_SUPPORTS_48HZ
+		bool "48 HZ" if SYS_SUPPORTS_48HZ || SYS_SUPPORTS_ARBIT_HZ
 
 	config HZ_100
 		bool "100 HZ" if SYS_SUPPORTS_100HZ || SYS_SUPPORTS_ARBIT_HZ
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 3fb7f3065c92..1c62381f5c23 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -12,6 +12,8 @@
 # for "archclean" cleaning up for this architecture.
 #
 
+KBUILD_DEFCONFIG := ip22_defconfig
+
 cflags-y :=
 
 #
@@ -480,10 +482,13 @@ endif
 # be 16kb aligned or the handling of the current variable will break.
 # Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
 #
-#core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/ arch/mips/arc/arc_con.o
+ifdef CONFIG_SGI_IP28
+  ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
+      $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+  endif
+endif
 core-$(CONFIG_SGI_IP28)		+= arch/mips/sgi-ip22/
 cflags-$(CONFIG_SGI_IP28)	+= -mr10k-cache-barrier=1 -Iinclude/asm-mips/mach-ip28
-#cflags-$(CONFIG_SGI_IP28)	+= -Iinclude/asm-mips/mach-ip28
 load-$(CONFIG_SGI_IP28)		+= 0xa800000020004000
 
 #
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index d8df5fdb045f..5c0d35d6e22a 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -22,24 +22,24 @@ struct cpu_spec* cur_cpu_spec[NR_CPUS];
 /* With some thought, we can probably use the mask to reduce the
  * size of the table.
  */
-struct cpu_spec	cpu_specs[] = {
-    { 0xffffffff, 0x00030100, "Au1000 DA", 1, 0 },
-    { 0xffffffff, 0x00030201, "Au1000 HA", 1, 0 },
-    { 0xffffffff, 0x00030202, "Au1000 HB", 1, 0 },
-    { 0xffffffff, 0x00030203, "Au1000 HC", 1, 1 },
-    { 0xffffffff, 0x00030204, "Au1000 HD", 1, 1 },
-    { 0xffffffff, 0x01030200, "Au1500 AB", 1, 1 },
-    { 0xffffffff, 0x01030201, "Au1500 AC", 0, 1 },
-    { 0xffffffff, 0x01030202, "Au1500 AD", 0, 1 },
-    { 0xffffffff, 0x02030200, "Au1100 AB", 1, 1 },
-    { 0xffffffff, 0x02030201, "Au1100 BA", 1, 1 },
-    { 0xffffffff, 0x02030202, "Au1100 BC", 1, 1 },
-    { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
-    { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
-    { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
-    { 0xffffffff, 0x04030201, "Au1200 AC", 1, 0 },
-    { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
+struct cpu_spec cpu_specs[] = {
+	{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
+	{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
+	{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
+	{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
+	{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
+	{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
+	{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
+	{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
+	{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
+	{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
+	{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
+	{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
+	{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
+	{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
 };
 
 void
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 428ed275a0f6..57f17b41098d 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -161,22 +161,22 @@ static dbdev_tab_t dbdev_tab[] = {
 	{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
 
 	/* Provide 16 user definable device types */
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
-	{ 0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
+	{ ~0, 0, 0, 0, 0, 0, 0 },
 };
 
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
@@ -209,7 +209,7 @@ au1xxx_ddma_add_device(dbdev_tab_t *dev)
 	dbdev_tab_t *p=NULL;
 	static u16 new_id=0x1000;
 
-	p = find_dbdev_id(0);
+	p = find_dbdev_id(~0);
 	if ( NULL != p )
 	{
 		memcpy(p, dev, sizeof(dbdev_tab_t));
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 841904cdef4d..39d681265297 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -189,7 +189,7 @@ static struct resource au1200_lcd_resources[] = {
 static struct resource au1200_ide0_resources[] = {
 	[0] = {
 		.start		= AU1XXX_ATA_PHYS_ADDR,
-		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index d885e3848ec6..9e4ab80caab6 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -57,7 +57,7 @@ void __init plat_mem_setup(void)
 {
 	struct	cpu_spec *sp;
 	char *argptr;
-	unsigned long prid, cpupll, bclk = 1;
+	unsigned long prid, cpufreq, bclk = 1;
 
 	set_cpuspec();
 	sp = cur_cpu_spec[0];
@@ -65,8 +65,15 @@ void __init plat_mem_setup(void)
 	board_setup();  /* board specific setup */
 
 	prid = read_c0_prid();
-	cpupll = (au_readl(0xB1900060) & 0x3F) * 12;
-	printk("(PRId %08lx) @ %ldMHZ\n", prid, cpupll);
+	if (sp->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
+#else
+		cpufreq = 396;
+#endif
+	else
+		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
+	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
 
 	bclk = sp->cpu_bclk;
 	if (bclk)
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index f113b512d7b1..e122bbc6cd88 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -209,18 +209,22 @@ unsigned long cal_r4koff(void)
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
 		au_writel(0, SYS_TOYWRITE);
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
+	} else
+		no_au1xxx_32khz = 1;
 
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
-			AU1000_SRC_CLK;
-	}
-	else {
-		/* The 32KHz oscillator isn't running, so assume there
-		 * isn't one and grab the processor speed from the PLL.
-		 * NOTE: some old silicon doesn't allow reading the PLL.
-		 */
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (cur_cpu_spec[0]->cpu_pll_wo)
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
+	else
 		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-		no_au1xxx_32khz = 1;
-	}
 	mips_hpt_frequency = cpu_speed;
 	// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index a9237f41933d..b2e413e597a8 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -33,11 +33,10 @@
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
-#include <asm/keyboard.h>
 #include <asm/mipsregs.h>
 #include <asm/reboot.h>
 #include <asm/pgtable.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 void board_reset(void)
 {
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index 389349295d70..a343da134334 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -45,7 +45,7 @@
 #include <asm/io.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>
-#include <asm/au1000.h>
+#include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index abf70d74e9d7..3b42cea2e402 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,58 +1,48 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:22 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 08:11:19 2008
 #
 CONFIG_MIPS=y
 
 #
 # Machine selection
 #
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
+# CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
+# CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
-CONFIG_SIBYTE_BIGSUR=y
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
 # CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
 # CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+CONFIG_SIBYTE_BIGSUR=y
 # CONFIG_SNI_RM is not set
 # CONFIG_TOSHIBA_JMR3927 is not set
 # CONFIG_TOSHIBA_RBTX4927 is not set
 # CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
 CONFIG_SIBYTE_BCM1x80=y
 CONFIG_SIBYTE_SB1xxx_SOC=y
 # CONFIG_CPU_SB1_PASS_1 is not set
@@ -68,9 +58,11 @@ CONFIG_SIBYTE_CFE=y
 # CONFIG_SIBYTE_CFE_CONSOLE is not set
 # CONFIG_SIBYTE_BUS_WATCHER is not set
 # CONFIG_SIBYTE_TBPROF is not set
+CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -81,11 +73,17 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
 CONFIG_CEVT_BCM1480=y
 CONFIG_CSRC_BCM1480=y
+CONFIG_CFE=y
 CONFIG_DMA_COHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
@@ -93,10 +91,6 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
 #
 # CPU selection
 #
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_CPU_LOONGSON2 is not set
 # CONFIG_CPU_MIPS32_R1 is not set
 # CONFIG_CPU_MIPS32_R2 is not set
@@ -137,14 +131,15 @@ CONFIG_PAGE_SIZE_4KB=y
 CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
 CONFIG_CPU_HAS_LLSC=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -152,13 +147,19 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
 CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -171,38 +172,45 @@ CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 # CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-# CONFIG_CPUSETS is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -211,24 +219,33 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -236,12 +253,10 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_BLOCK_COMPAT=y
 
 #
 # IO Schedulers
@@ -255,6 +270,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
@@ -262,23 +278,19 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCI_DEBUG=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+CONFIG_ZONE_DMA32=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-# CONFIG_BUILD_ELF64 is not set
 CONFIG_MIPS32_COMPAT=y
 CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
@@ -292,7 +304,6 @@ CONFIG_BINFMT_ELF32=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
 
 #
 # Networking
@@ -302,7 +313,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -310,10 +320,11 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
@@ -322,41 +333,141 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_ARPD is not set
 # CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
 CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -369,10 +480,6 @@ CONFIG_NETWORK_SECMARK=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -380,9 +487,21 @@ CONFIG_NETWORK_SECMARK=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -391,85 +510,70 @@ CONFIG_NETWORK_SECMARK=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_SGI_IOC4=m
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 CONFIG_BLK_DEV_IDETAPE=y
 CONFIG_BLK_DEV_IDEFLOPPY=y
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
 CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
@@ -495,87 +599,196 @@ CONFIG_BLK_DEV_IT8213=m
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+CONFIG_SATA_SIL24=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+CONFIG_PATA_SIL680=y
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -585,52 +798,53 @@ CONFIG_SB1250_MAC=y
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
 # CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 CONFIG_CHELSIO_T3=m
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -660,17 +874,16 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-CONFIG_MOXA_SMARTIO_NEW=m
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
-CONFIG_SERIAL_SB1250_DUART=y
-CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -680,39 +893,24 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
 #
 # Non-8250 serial port support
 #
+CONFIG_SERIAL_SB1250_DUART=y
+CONFIG_SERIAL_SB1250_DUART_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
@@ -736,29 +934,30 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PASEMI is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 CONFIG_I2C_SIBYTE=y
+# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-CONFIG_SENSORS_DS1374=y
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
-CONFIG_SENSORS_PCA9539=y
+# CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
+# CONFIG_TPS65010 is not set
 CONFIG_SENSORS_MAX6875=y
+# CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
@@ -769,43 +968,49 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
@@ -814,104 +1019,73 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS=m
 CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=m
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
 
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
 #
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
 
 #
 # Pseudo filesystems
@@ -923,7 +1097,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=m
 
 #
@@ -939,14 +1112,13 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -958,6 +1130,7 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -965,37 +1138,61 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
 CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1003,8 +1200,8 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
@@ -1014,15 +1211,19 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_SB1XXX_CORELIS is not set
@@ -1034,23 +1235,22 @@ CONFIG_CMDLINE=""
 CONFIG_KEYS=y
 CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
 CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_GF128MUL=m
@@ -1058,39 +1258,50 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_XTS=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=m
 CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_TEA=m
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
 # CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_CAMELLIA=m
 # CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/defconfig b/arch/mips/defconfig
deleted file mode 100644
index 4f5e56c9335e..000000000000
--- a/arch/mips/defconfig
+++ /dev/null
@@ -1,1158 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Tue Aug  7 12:39:49 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-CONFIG_SGI_IP22=y
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_ARC=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_ISA_DMA_SUPPORT_BROKEN=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_ARC32=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_ARC_CONSOLE=y
-CONFIG_ARC_PROMLIB=y
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-CONFIG_CPU_R5000=y
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_R4X00=y
-CONFIG_SYS_HAS_CPU_R5000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_IP22_CPU_SCACHE=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_VOLUNTARY=y
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_SECCOMP=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_EISA=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_EISA is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_IPV6_OPTIMISTIC_DAD=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=y
-CONFIG_NET_ACT_GACT=m
-CONFIG_GACT_PROB=y
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_PEDIT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_IND is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_RFKILL=m
-CONFIG_RFKILL_INPUT=m
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-CONFIG_CONNECTOR=m
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_FC_ATTRS is not set
-CONFIG_SCSI_ISCSI_ATTRS=m
-# CONFIG_SCSI_SAS_LIBSAS is not set
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-CONFIG_SGIWD93_SCSI=y
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_IFB is not set
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_DM9000 is not set
-CONFIG_SGISEEQ=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-CONFIG_WLAN_PRE80211=y
-CONFIG_STRIP=m
-CONFIG_WLAN_80211=y
-# CONFIG_LIBERTAS is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=m
-# CONFIG_MOUSE_PS2_ALPS is not set
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
-# CONFIG_MOUSE_PS2_LIFEBOOK is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=m
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IP22_ZILOG=m
-CONFIG_SERIAL_CORE=m
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_INDYDOG=m
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_SGI_DS1286=m
-# CONFIG_R3964 is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SGI_NEWPORT_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_LOGO_SGI_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=m
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=m
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-CONFIG_EFS_FS=m
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
-CONFIG_SMB_NLS_REMOTE="cp437"
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-CONFIG_KEYS=y
-CONFIG_KEYS_DEBUG_PROC_KEYS=y
-# CONFIG_SECURITY is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ABLKCIPHER=m
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=m
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=m
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index ffa08362de17..6fcdb6fda2e2 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
-		   ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
+		   ptrace.o reset.o setup.o signal.o syscall.o \
 		   time.o topology.o traps.o unaligned.o
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
@@ -76,7 +76,6 @@ obj-$(CONFIG_PROC_FS)		+= proc.o
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
 
 obj-$(CONFIG_I8253)		+= i8253.o
-obj-$(CONFIG_PCSPEAKER)		+= pcspeaker.o
 
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index 417bb3e336ac..a1b48af0992f 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -167,7 +167,7 @@ static inline void check_mult_sh(void)
 	panic(bug64hit, !R4000_WAR ? r4kwar : nowar);
 }
 
-static volatile int daddi_ov __initdata = 0;
+static volatile int daddi_ov __cpuinitdata = 0;
 
 asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
 {
@@ -239,7 +239,7 @@ static inline void check_daddi(void)
 	panic(bug64hit, !DADDI_WAR ? daddiwar : nowar);
 }
 
-int daddiu_bug __initdata = -1;
+int daddiu_bug __cpuinitdata = -1;
 
 static inline void check_daddiu(void)
 {
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 5861a432a52f..89c3304cb93c 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -550,7 +550,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c)
 	}
 }
 
-static char unknown_isa[] __initdata = KERN_ERR \
+static char unknown_isa[] __cpuinitdata = KERN_ERR \
 	"Unsupported ISA type, c0.config0: %d.";
 
 static inline unsigned int decode_config0(struct cpuinfo_mips *c)
@@ -656,7 +656,7 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
 	return config3 & MIPS_CONF_M;
 }
 
-static void __init decode_configs(struct cpuinfo_mips *c)
+static void __cpuinit decode_configs(struct cpuinfo_mips *c)
 {
 	/* MIPS32 or MIPS64 compliant CPU.  */
 	c->options = MIPS_CPU_4KEX | MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER |
@@ -814,7 +814,7 @@ const char *__cpu_name[NR_CPUS];
 /*
  * Name a CPU
  */
-static __init const char *cpu_to_name(struct cpuinfo_mips *c)
+static __cpuinit const char *cpu_to_name(struct cpuinfo_mips *c)
 {
 	const char *name = NULL;
 
@@ -896,7 +896,7 @@ static __init const char *cpu_to_name(struct cpuinfo_mips *c)
 	return name;
 }
 
-__init void cpu_probe(void)
+__cpuinit void cpu_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int cpu = smp_processor_id();
@@ -959,7 +959,7 @@ __init void cpu_probe(void)
 		c->srsets = 1;
 }
 
-__init void cpu_report(void)
+__cpuinit void cpu_report(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index 0e2b5cd81f67..86e026f067bc 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -22,12 +22,17 @@ static struct clocksource clocksource_mips = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-void __init init_mips_clocksource(void)
+int __init init_mips_clocksource(void)
 {
+	if (!cpu_has_counter || !mips_hpt_frequency)
+		return -ENXIO;
+
 	/* Calclate a somewhat reasonable rating value */
 	clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
 
 	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
 
 	clocksource_register(&clocksource_mips);
+
+	return 0;
 }
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
index 3191afa29ad8..25f4eab8ea9c 100644
--- a/arch/mips/kernel/gdb-stub.c
+++ b/arch/mips/kernel/gdb-stub.c
@@ -139,7 +139,6 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/inst.h>
-#include <asm/smp.h>
 
 /*
  * external low-level support routines
@@ -656,6 +655,7 @@ void set_async_breakpoint(unsigned long *epc)
 	*epc = (unsigned long)async_breakpoint;
 }
 
+#ifdef CONFIG_SMP
 static void kgdb_wait(void *arg)
 {
 	unsigned flags;
@@ -668,6 +668,7 @@ static void kgdb_wait(void *arg)
 
 	local_irq_restore(flags);
 }
+#endif
 
 /*
  * GDB stub needs to call kgdb_wait on all processor with interrupts
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index a24fb7900901..361364501d34 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -195,7 +195,7 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 	j		start_kernel
 	END(kernel_entry)
 
-	__INIT
+	__CPUINIT
 
 #ifdef CONFIG_SMP
 /*
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index fc4aa07b6d35..38fa1a194bf4 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -15,6 +15,7 @@
 #include <asm/time.h>
 
 DEFINE_SPINLOCK(i8253_lock);
+EXPORT_SYMBOL(i8253_lock);
 
 /*
  * Initialize the PIT timer.
diff --git a/arch/mips/kernel/semaphore.c b/arch/mips/kernel/semaphore.c
deleted file mode 100644
index 1265358cdca1..000000000000
--- a/arch/mips/kernel/semaphore.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * MIPS-specific semaphore code.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- * Copyright (C) 2004 Ralf Baechle <ralf@linux-mips.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
- * to eliminate the SMP races in the old version between the updates
- * of `count' and `waking'.  Now we use negative `count' values to
- * indicate that some process(es) are waiting for the semaphore.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/cpu-features.h>
-#include <asm/errno.h>
-#include <asm/semaphore.h>
-#include <asm/war.h>
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- *	old_count = sem->count;
- *	tmp = MAX(old_count, 0) + incr;
- *	sem->count = tmp;
- *	return old_count;
- *
- * On machines without lld/scd we need a spinlock to make the manipulation of
- * sem->count and sem->waking atomic.  Scalability isn't an issue because
- * this lock is used on UP only so it's just an empty variable.
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
-	int old_count, tmp;
-
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
-		__asm__ __volatile__(
-		"	.set	mips3					\n"
-		"1:	ll	%0, %2		# __sem_update_count	\n"
-		"	sra	%1, %0, 31				\n"
-		"	not	%1					\n"
-		"	and	%1, %0, %1				\n"
-		"	addu	%1, %1, %3				\n"
-		"	sc	%1, %2					\n"
-		"	beqzl	%1, 1b					\n"
-		"	.set	mips0					\n"
-		: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
-		: "r" (incr), "m" (sem->count));
-	} else if (cpu_has_llsc) {
-		__asm__ __volatile__(
-		"	.set	mips3					\n"
-		"1:	ll	%0, %2		# __sem_update_count	\n"
-		"	sra	%1, %0, 31				\n"
-		"	not	%1					\n"
-		"	and	%1, %0, %1				\n"
-		"	addu	%1, %1, %3				\n"
-		"	sc	%1, %2					\n"
-		"	beqz	%1, 1b					\n"
-		"	.set	mips0					\n"
-		: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
-		: "r" (incr), "m" (sem->count));
-	} else {
-		static DEFINE_SPINLOCK(semaphore_lock);
-		unsigned long flags;
-
-		spin_lock_irqsave(&semaphore_lock, flags);
-		old_count = atomic_read(&sem->count);
-		tmp = max_t(int, old_count, 0) + incr;
-		atomic_set(&sem->count, tmp);
-		spin_unlock_irqrestore(&semaphore_lock, flags);
-	}
-
-	return old_count;
-}
-
-void __up(struct semaphore *sem)
-{
-	/*
-	 * Note that we incremented count in up() before we came here,
-	 * but that was ineffective since the result was <= 0, and
-	 * any negative value of count is equivalent to 0.
-	 * This ends up setting count to 1, unless count is now > 0
-	 * (i.e. because some other cpu has called up() in the meantime),
-	 * in which case we just increment count.
-	 */
-	__sem_update_count(sem, 1);
-	wake_up(&sem->wait);
-}
-
-EXPORT_SYMBOL(__up);
-
-/*
- * Note that when we come in to __down or __down_interruptible,
- * we have already decremented count, but that decrement was
- * ineffective since the result was < 0, and any negative value
- * of count is equivalent to 0.
- * Thus it is only when we decrement count from some value > 0
- * that we have actually got the semaphore.
- */
-void __sched __down(struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	__set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	/*
-	 * Try to get the semaphore.  If the count is > 0, then we've
-	 * got the semaphore; we decrement count and exit the loop.
-	 * If the count is 0 or negative, we set it to -1, indicating
-	 * that we are asleep, and then sleep.
-	 */
-	while (__sem_update_count(sem, -1) <= 0) {
-		schedule();
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	__set_task_state(tsk, TASK_RUNNING);
-
-	/*
-	 * If there are any more sleepers, wake one of them up so
-	 * that it can either get the semaphore, or set count to -1
-	 * indicating that there are still processes sleeping.
-	 */
-	wake_up(&sem->wait);
-}
-
-EXPORT_SYMBOL(__down);
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	__set_task_state(tsk, TASK_INTERRUPTIBLE);
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	while (__sem_update_count(sem, -1) <= 0) {
-		if (signal_pending(current)) {
-			/*
-			 * A signal is pending - give up trying.
-			 * Set sem->count to 0 if it is negative,
-			 * since we are no longer sleeping.
-			 */
-			__sem_update_count(sem, 0);
-			retval = -EINTR;
-			break;
-		}
-		schedule();
-		set_task_state(tsk, TASK_INTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	__set_task_state(tsk, TASK_RUNNING);
-
-	wake_up(&sem->wait);
-	return retval;
-}
-
-EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c
index 9f85d4cecc5b..b45a7093ca2d 100644
--- a/arch/mips/kernel/time.c
+++ b/arch/mips/kernel/time.c
@@ -157,6 +157,6 @@ void __init time_init(void)
 {
 	plat_time_init();
 
-	if (mips_clockevent_init() || !cpu_has_mfc0_count_bug())
+	if (!mips_clockevent_init() || !cpu_has_mfc0_count_bug())
 		init_mips_clocksource();
 }
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index fcae66752972..984c0d0a7b4d 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -534,8 +534,7 @@ static int simulate_llsc(struct pt_regs *regs, unsigned int opcode)
 
 /*
  * Simulate trapping 'rdhwr' instructions to provide user accessible
- * registers not implemented in hardware.  The only current use of this
- * is the thread area pointer.
+ * registers not implemented in hardware.
  */
 static int simulate_rdhwr(struct pt_regs *regs, unsigned int opcode)
 {
@@ -545,11 +544,31 @@ static int simulate_rdhwr(struct pt_regs *regs, unsigned int opcode)
 		int rd = (opcode & RD) >> 11;
 		int rt = (opcode & RT) >> 16;
 		switch (rd) {
-			case 29:
-				regs->regs[rt] = ti->tp_value;
-				return 0;
+		case 0:		/* CPU number */
+			regs->regs[rt] = smp_processor_id();
+			return 0;
+		case 1:		/* SYNCI length */
+			regs->regs[rt] = min(current_cpu_data.dcache.linesz,
+					     current_cpu_data.icache.linesz);
+			return 0;
+		case 2:		/* Read count register */
+			regs->regs[rt] = read_c0_count();
+			return 0;
+		case 3:		/* Count register resolution */
+			switch (current_cpu_data.cputype) {
+			case CPU_20KC:
+			case CPU_25KF:
+				regs->regs[rt] = 1;
+				break;
 			default:
-				return -1;
+				regs->regs[rt] = 2;
+			}
+			return 0;
+		case 29:
+			regs->regs[rt] = ti->tp_value;
+			return 0;
+		default:
+			return -1;
 		}
 	}
 
@@ -1287,7 +1306,7 @@ int cp0_compare_irq;
 int cp0_perfcount_irq;
 EXPORT_SYMBOL_GPL(cp0_perfcount_irq);
 
-void __init per_cpu_trap_init(void)
+void __cpuinit per_cpu_trap_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	unsigned int status_set = ST0_CU0;
@@ -1404,11 +1423,12 @@ void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 	flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
-static char panic_null_cerr[] __initdata =
+static char panic_null_cerr[] __cpuinitdata =
 	"Trying to set NULL cache error exception handler";
 
 /* Install uncached CPU exception handler */
-void __init set_uncached_handler(unsigned long offset, void *addr, unsigned long size)
+void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
+	unsigned long size)
 {
 #ifdef CONFIG_32BIT
 	unsigned long uncached_ebase = KSEG1ADDR(ebase);
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eed2dc4273e0..39804c584edd 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -262,13 +262,21 @@ void dump_mtregs(void)
 /* Find some VPE program space  */
 static void *alloc_progmem(unsigned long len)
 {
+	void *addr;
+
 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
-	/* this means you must tell linux to use less memory than you physically have */
-	return pfn_to_kaddr(max_pfn);
+	/*
+	 * This means you must tell Linux to use less memory than you
+	 * physically have, for example by passing a mem= boot argument.
+	 */
+	addr = pfn_to_kaddr(max_pfn);
+	memset(addr, 0, len);
 #else
-	// simple grab some mem for now
-	return kmalloc(len, GFP_KERNEL);
+	/* simple grab some mem for now */
+	addr = kzalloc(len, GFP_KERNEL);
 #endif
+
+	return addr;
 }
 
 static void release_progmem(void *ptr)
@@ -884,9 +892,10 @@ static int vpe_elfload(struct vpe * v)
 	}
 
 	v->load_addr = alloc_progmem(mod.core_size);
-	memset(v->load_addr, 0, mod.core_size);
+	if (!v->load_addr)
+		return -ENOMEM;
 
-	printk("VPE loader: loading to %p\n", v->load_addr);
+	pr_info("VPE loader: loading to %p\n", v->load_addr);
 
 	if (relocate) {
 		for (i = 0; i < hdr->e_shnum; i++) {
diff --git a/arch/mips/lib/ucmpdi2.c b/arch/mips/lib/ucmpdi2.c
index b33d8569bcb0..bb4cb2f828ea 100644
--- a/arch/mips/lib/ucmpdi2.c
+++ b/arch/mips/lib/ucmpdi2.c
@@ -17,3 +17,5 @@ word_type __ucmpdi2(unsigned long long a, unsigned long long b)
 		return 2;
 	return 1;
 }
+
+EXPORT_SYMBOL(__ucmpdi2);
diff --git a/arch/mips/lib/uncached.c b/arch/mips/lib/uncached.c
index 27b012d4341c..a6d1c77034d5 100644
--- a/arch/mips/lib/uncached.c
+++ b/arch/mips/lib/uncached.c
@@ -36,7 +36,7 @@
  * values, so we can avoid sharing the same stack area between a cached
  * and the uncached mode.
  */
-unsigned long __init run_uncached(void *func)
+unsigned long __cpuinit run_uncached(void *func)
 {
 	register long sp __asm__("$sp");
 	register long ret __asm__("$2");
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index f02ce6308e51..b50e0fc406ac 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -146,7 +146,7 @@ void __init plat_perf_setup(void)
 	}
 }
 
-unsigned int __init get_c0_compare_int(void)
+unsigned int __cpuinit get_c0_compare_int(void)
 {
 #ifdef MSC01E_INT_BASE
 	if (cpu_has_veic) {
diff --git a/arch/mips/mipssim/sim_time.c b/arch/mips/mipssim/sim_time.c
index e39bbe989da3..881ecbc1fa23 100644
--- a/arch/mips/mipssim/sim_time.c
+++ b/arch/mips/mipssim/sim_time.c
@@ -83,7 +83,7 @@ static void mips_timer_dispatch(void)
 }
 
 
-unsigned __init get_c0_compare_int(void)
+unsigned __cpuinit get_c0_compare_int(void)
 {
 #ifdef MSC01E_INT_BASE
 	if (cpu_has_veic) {
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 562abb77d1d5..76935e320214 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -307,7 +307,7 @@ static void r3k_dma_cache_wback_inv(unsigned long start, unsigned long size)
 	r3k_flush_dcache_range(start, start + size);
 }
 
-void __init r3k_cache_init(void)
+void __cpuinit r3k_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 2c4f7e11f0d5..77aefb4ebedd 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -93,7 +93,7 @@ static inline void r4k_blast_dcache_page_dc32(unsigned long addr)
 	blast_dcache32_page(addr);
 }
 
-static void __init r4k_blast_dcache_page_setup(void)
+static void __cpuinit r4k_blast_dcache_page_setup(void)
 {
 	unsigned long  dc_lsize = cpu_dcache_line_size();
 
@@ -107,7 +107,7 @@ static void __init r4k_blast_dcache_page_setup(void)
 
 static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
 
-static void __init r4k_blast_dcache_page_indexed_setup(void)
+static void __cpuinit r4k_blast_dcache_page_indexed_setup(void)
 {
 	unsigned long dc_lsize = cpu_dcache_line_size();
 
@@ -121,7 +121,7 @@ static void __init r4k_blast_dcache_page_indexed_setup(void)
 
 static void (* r4k_blast_dcache)(void);
 
-static void __init r4k_blast_dcache_setup(void)
+static void __cpuinit r4k_blast_dcache_setup(void)
 {
 	unsigned long dc_lsize = cpu_dcache_line_size();
 
@@ -206,7 +206,7 @@ static inline void tx49_blast_icache32_page_indexed(unsigned long page)
 
 static void (* r4k_blast_icache_page)(unsigned long addr);
 
-static void __init r4k_blast_icache_page_setup(void)
+static void __cpuinit r4k_blast_icache_page_setup(void)
 {
 	unsigned long ic_lsize = cpu_icache_line_size();
 
@@ -223,7 +223,7 @@ static void __init r4k_blast_icache_page_setup(void)
 
 static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
 
-static void __init r4k_blast_icache_page_indexed_setup(void)
+static void __cpuinit r4k_blast_icache_page_indexed_setup(void)
 {
 	unsigned long ic_lsize = cpu_icache_line_size();
 
@@ -247,7 +247,7 @@ static void __init r4k_blast_icache_page_indexed_setup(void)
 
 static void (* r4k_blast_icache)(void);
 
-static void __init r4k_blast_icache_setup(void)
+static void __cpuinit r4k_blast_icache_setup(void)
 {
 	unsigned long ic_lsize = cpu_icache_line_size();
 
@@ -268,7 +268,7 @@ static void __init r4k_blast_icache_setup(void)
 
 static void (* r4k_blast_scache_page)(unsigned long addr);
 
-static void __init r4k_blast_scache_page_setup(void)
+static void __cpuinit r4k_blast_scache_page_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
@@ -286,7 +286,7 @@ static void __init r4k_blast_scache_page_setup(void)
 
 static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
 
-static void __init r4k_blast_scache_page_indexed_setup(void)
+static void __cpuinit r4k_blast_scache_page_indexed_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
@@ -304,7 +304,7 @@ static void __init r4k_blast_scache_page_indexed_setup(void)
 
 static void (* r4k_blast_scache)(void);
 
-static void __init r4k_blast_scache_setup(void)
+static void __cpuinit r4k_blast_scache_setup(void)
 {
 	unsigned long sc_lsize = cpu_scache_line_size();
 
@@ -361,6 +361,16 @@ static inline int has_valid_asid(const struct mm_struct *mm)
 #endif
 }
 
+static void r4k__flush_cache_vmap(void)
+{
+	r4k_blast_dcache();
+}
+
+static void r4k__flush_cache_vunmap(void)
+{
+	r4k_blast_dcache();
+}
+
 static inline void local_r4k_flush_cache_range(void * args)
 {
 	struct vm_area_struct *vma = args;
@@ -691,11 +701,11 @@ static inline void rm7k_erratum31(void)
 	}
 }
 
-static char *way_string[] __initdata = { NULL, "direct mapped", "2-way",
+static char *way_string[] __cpuinitdata = { NULL, "direct mapped", "2-way",
 	"3-way", "4-way", "5-way", "6-way", "7-way", "8-way"
 };
 
-static void __init probe_pcache(void)
+static void __cpuinit probe_pcache(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int config = read_c0_config();
@@ -1016,7 +1026,7 @@ static void __init probe_pcache(void)
  * executes in KSEG1 space or else you will crash and burn badly.  You have
  * been warned.
  */
-static int __init probe_scache(void)
+static int __cpuinit probe_scache(void)
 {
 	unsigned long flags, addr, begin, end, pow2;
 	unsigned int config = read_c0_config();
@@ -1095,7 +1105,7 @@ extern int r5k_sc_init(void);
 extern int rm7k_sc_init(void);
 extern int mips_sc_init(void);
 
-static void __init setup_scache(void)
+static void __cpuinit setup_scache(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int config = read_c0_config();
@@ -1206,7 +1216,7 @@ void au1x00_fixup_config_od(void)
 	}
 }
 
-static void __init coherency_setup(void)
+static void __cpuinit coherency_setup(void)
 {
 	change_c0_config(CONF_CM_CMASK, CONF_CM_DEFAULT);
 
@@ -1238,7 +1248,7 @@ static void __init coherency_setup(void)
 	}
 }
 
-void __init r4k_cache_init(void)
+void __cpuinit r4k_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
@@ -1281,6 +1291,10 @@ void __init r4k_cache_init(void)
 					PAGE_SIZE - 1);
 	else
 		shm_align_mask = PAGE_SIZE-1;
+
+	__flush_cache_vmap	= r4k__flush_cache_vmap;
+	__flush_cache_vunmap	= r4k__flush_cache_vunmap;
+
 	flush_cache_all		= cache_noop;
 	__flush_cache_all	= r4k___flush_cache_all;
 	flush_cache_mm		= r4k_flush_cache_mm;
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 9ea121e8cdce..a9f7f1f5e9b4 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -122,6 +122,16 @@ static inline void tx39_blast_icache(void)
 	local_irq_restore(flags);
 }
 
+static void tx39__flush_cache_vmap(void)
+{
+	tx39_blast_dcache();
+}
+
+static void tx39__flush_cache_vunmap(void)
+{
+	tx39_blast_dcache();
+}
+
 static inline void tx39_flush_cache_all(void)
 {
 	if (!cpu_has_dc_aliases)
@@ -329,7 +339,7 @@ static __init void tx39_probe_cache(void)
 	}
 }
 
-void __init tx39_cache_init(void)
+void __cpuinit tx39_cache_init(void)
 {
 	extern void build_clear_page(void);
 	extern void build_copy_page(void);
@@ -344,6 +354,8 @@ void __init tx39_cache_init(void)
 	switch (current_cpu_type()) {
 	case CPU_TX3912:
 		/* TX39/H core (writethru direct-map cache) */
+		__flush_cache_vmap	= tx39__flush_cache_vmap;
+		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
 		flush_cache_all	= tx39h_flush_icache_all;
 		__flush_cache_all	= tx39h_flush_icache_all;
 		flush_cache_mm		= (void *) tx39h_flush_icache_all;
@@ -369,6 +381,9 @@ void __init tx39_cache_init(void)
 		write_c0_wired(0);	/* set 8 on reset... */
 		/* board-dependent init code may set WBON */
 
+		__flush_cache_vmap	= tx39__flush_cache_vmap;
+		__flush_cache_vunmap	= tx39__flush_cache_vunmap;
+
 		flush_cache_all = tx39_flush_cache_all;
 		__flush_cache_all = tx39___flush_cache_all;
 		flush_cache_mm = tx39_flush_cache_mm;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 6a24651971df..f5903679ee6a 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -30,6 +30,9 @@ void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
 
+void (*__flush_cache_vmap)(void);
+void (*__flush_cache_vunmap)(void);
+
 /* MIPS specific cache operations */
 void (*flush_cache_sigtramp)(unsigned long addr);
 void (*local_flush_data_cache_page)(void * addr);
@@ -127,9 +130,10 @@ void __update_cache(struct vm_area_struct *vma, unsigned long address,
 	}
 }
 
-static char cache_panic[] __initdata = "Yeee, unsupported cache architecture.";
+static char cache_panic[] __cpuinitdata =
+	"Yeee, unsupported cache architecture.";
 
-void __init cpu_cache_init(void)
+void __devinit cpu_cache_init(void)
 {
 	if (cpu_has_3k_cache) {
 		extern void __weak r3k_cache_init(void);
diff --git a/arch/mips/mm/cex-sb1.S b/arch/mips/mm/cex-sb1.S
index e54a62f2807c..2d08268bb705 100644
--- a/arch/mips/mm/cex-sb1.S
+++ b/arch/mips/mm/cex-sb1.S
@@ -34,8 +34,6 @@
 	 * is changed.
 	 */
 
-        __INIT
-
 	.set	mips64
 	.set	noreorder
 	.set	noat
@@ -51,6 +49,8 @@
 	 * (0x170-0x17f) are used to preserve k0, k1, and ra.
 	 */
 
+	__CPUINIT
+
 LEAF(except_vec2_sb1)
 	/*
 	 * If this error is recoverable, we need to exit the handler
diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c
index 9185fbf37c0d..455dedb5b39e 100644
--- a/arch/mips/mm/pg-r4k.c
+++ b/arch/mips/mm/pg-r4k.c
@@ -66,21 +66,21 @@ EXPORT_SYMBOL(copy_page);
  * with 64-bit kernels.  The prefetch offsets have been experimentally tuned
  * an Origin 200.
  */
-static int pref_offset_clear __initdata = 512;
-static int pref_offset_copy  __initdata = 256;
+static int pref_offset_clear __cpuinitdata = 512;
+static int pref_offset_copy  __cpuinitdata = 256;
 
-static unsigned int pref_src_mode __initdata;
-static unsigned int pref_dst_mode __initdata;
+static unsigned int pref_src_mode __cpuinitdata;
+static unsigned int pref_dst_mode __cpuinitdata;
 
-static int load_offset __initdata;
-static int store_offset __initdata;
+static int load_offset __cpuinitdata;
+static int store_offset __cpuinitdata;
 
-static unsigned int __initdata *dest, *epc;
+static unsigned int __cpuinitdata *dest, *epc;
 
 static unsigned int instruction_pending;
 static union mips_instruction delayed_mi;
 
-static void __init emit_instruction(union mips_instruction mi)
+static void __cpuinit emit_instruction(union mips_instruction mi)
 {
 	if (instruction_pending)
 		*epc++ = delayed_mi.word;
@@ -222,7 +222,7 @@ static inline void build_cdex_p(void)
 	emit_instruction(mi);
 }
 
-static void __init __build_store_reg(int reg)
+static void __cpuinit __build_store_reg(int reg)
 {
 	union mips_instruction mi;
 	unsigned int width;
@@ -339,7 +339,7 @@ static inline void build_jr_ra(void)
 	flush_delay_slot_or_nop();
 }
 
-void __init build_clear_page(void)
+void __cpuinit build_clear_page(void)
 {
 	unsigned int loop_start;
 	unsigned long off;
@@ -442,7 +442,7 @@ dest = label();
 	pr_debug("\t.set pop\n");
 }
 
-void __init build_copy_page(void)
+void __cpuinit build_copy_page(void)
 {
 	unsigned int loop_start;
 	unsigned long off;
diff --git a/arch/mips/mm/pg-sb1.c b/arch/mips/mm/pg-sb1.c
index 89925ec57d6a..49e289d05414 100644
--- a/arch/mips/mm/pg-sb1.c
+++ b/arch/mips/mm/pg-sb1.c
@@ -293,10 +293,10 @@ void copy_page(void *to, void *from)
 EXPORT_SYMBOL(clear_page);
 EXPORT_SYMBOL(copy_page);
 
-void __init build_clear_page(void)
+void __cpuinit build_clear_page(void)
 {
 }
 
-void __init build_copy_page(void)
+void __cpuinit build_copy_page(void)
 {
 }
diff --git a/arch/mips/mm/sc-ip22.c b/arch/mips/mm/sc-ip22.c
index d236cf8b7374..1f602a110e10 100644
--- a/arch/mips/mm/sc-ip22.c
+++ b/arch/mips/mm/sc-ip22.c
@@ -168,7 +168,7 @@ struct bcache_ops indy_sc_ops = {
 	.bc_inv = indy_sc_wback_invalidate
 };
 
-void __init indy_sc_init(void)
+void __cpuinit indy_sc_init(void)
 {
 	if (indy_sc_probe()) {
 		indy_sc_enable();
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index c13170bc675c..b55c2d1b998f 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -100,7 +100,7 @@ static inline int __init mips_sc_probe(void)
 	return 1;
 }
 
-int __init mips_sc_init(void)
+int __cpuinit mips_sc_init(void)
 {
 	int found = mips_sc_probe();
 	if (found) {
@@ -109,4 +109,3 @@ int __init mips_sc_init(void)
 	}
 	return found;
 }
-
diff --git a/arch/mips/mm/sc-r5k.c b/arch/mips/mm/sc-r5k.c
index d35b6c1103a3..f330d38e5575 100644
--- a/arch/mips/mm/sc-r5k.c
+++ b/arch/mips/mm/sc-r5k.c
@@ -99,7 +99,7 @@ static struct bcache_ops r5k_sc_ops = {
 	.bc_inv = r5k_dma_cache_inv_sc
 };
 
-void __init r5k_sc_init(void)
+void __cpuinit r5k_sc_init(void)
 {
 	if (r5k_sc_probe()) {
 		r5k_sc_enable();
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index 31ec73052423..fc227f3b1199 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -128,7 +128,7 @@ struct bcache_ops rm7k_sc_ops = {
 	.bc_inv = rm7k_sc_inv
 };
 
-void __init rm7k_sc_init(void)
+void __cpuinit rm7k_sc_init(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int config = read_c0_config();
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index 7948e9a5e372..a782549ac80e 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -281,7 +281,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 	}
 }
 
-void __init tlb_init(void)
+void __cpuinit tlb_init(void)
 {
 	local_flush_tlb_all();
 
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 74ae0348cc92..63065d6e8063 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -388,7 +388,7 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
  * lifetime of the system
  */
 
-static int temp_tlb_entry __initdata;
+static int temp_tlb_entry __cpuinitdata;
 
 __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
 			       unsigned long entryhi, unsigned long pagemask)
@@ -427,7 +427,7 @@ out:
 	return ret;
 }
 
-static void __init probe_tlb(unsigned long config)
+static void __cpuinit probe_tlb(unsigned long config)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 	unsigned int reg;
@@ -455,7 +455,7 @@ static void __init probe_tlb(unsigned long config)
 	c->tlbsize = ((reg >> 25) & 0x3f) + 1;
 }
 
-static int __initdata ntlb = 0;
+static int __cpuinitdata ntlb = 0;
 static int __init set_ntlb(char *str)
 {
 	get_option(&str, &ntlb);
@@ -464,7 +464,7 @@ static int __init set_ntlb(char *str)
 
 __setup("ntlb=", set_ntlb);
 
-void __init tlb_init(void)
+void __cpuinit tlb_init(void)
 {
 	unsigned int config = read_c0_config();
 
@@ -473,7 +473,7 @@ void __init tlb_init(void)
 	 *   - On R4600 1.7 the tlbp never hits for pages smaller than
 	 *     the value in the c0_pagemask register.
 	 *   - The entire mm handling assumes the c0_pagemask register to
-	 *     be set for 4kb pages.
+	 *     be set to fixed-size pages.
 	 */
 	probe_tlb(config);
 	write_c0_pagemask(PM_DEFAULT_MASK);
diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c
index bd8409d8ff62..4f01a3be215c 100644
--- a/arch/mips/mm/tlb-r8k.c
+++ b/arch/mips/mm/tlb-r8k.c
@@ -214,14 +214,14 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
 	local_irq_restore(flags);
 }
 
-static void __init probe_tlb(unsigned long config)
+static void __cpuinit probe_tlb(unsigned long config)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
 	c->tlbsize = 3 * 128;		/* 3 sets each 128 entries */
 }
 
-void __init tlb_init(void)
+void __cpuinit tlb_init(void)
 {
 	unsigned int config = read_c0_config();
 	unsigned long status;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 218a6cc415e8..382738ca8a0b 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -60,7 +60,7 @@ static inline int __maybe_unused r10000_llsc_war(void)
  * why; it's not an issue caused by the core RTL.
  *
  */
-static int __init m4kc_tlbp_war(void)
+static int __cpuinit m4kc_tlbp_war(void)
 {
 	return (current_cpu_data.processor_id & 0xffff00) ==
 	       (PRID_COMP_MIPS | PRID_IMP_4KC);
@@ -144,16 +144,16 @@ static inline void dump_handler(const u32 *handler, int count)
  * We deliberately chose a buffer size of 128, so we won't scribble
  * over anything important on overflow before we panic.
  */
-static u32 tlb_handler[128] __initdata;
+static u32 tlb_handler[128] __cpuinitdata;
 
 /* simply assume worst case size for labels and relocs */
-static struct uasm_label labels[128] __initdata;
-static struct uasm_reloc relocs[128] __initdata;
+static struct uasm_label labels[128] __cpuinitdata;
+static struct uasm_reloc relocs[128] __cpuinitdata;
 
 /*
  * The R3000 TLB handler is simple.
  */
-static void __init build_r3000_tlb_refill_handler(void)
+static void __cpuinit build_r3000_tlb_refill_handler(void)
 {
 	long pgdc = (long)pgd_current;
 	u32 *p;
@@ -197,7 +197,7 @@ static void __init build_r3000_tlb_refill_handler(void)
  * other one.To keep things simple, we first assume linear space,
  * then we relocate it to the final handler layout as needed.
  */
-static u32 final_handler[64] __initdata;
+static u32 final_handler[64] __cpuinitdata;
 
 /*
  * Hazards
@@ -221,7 +221,7 @@ static u32 final_handler[64] __initdata;
  *
  * As if we MIPS hackers wouldn't know how to nop pipelines happy ...
  */
-static void __init __maybe_unused build_tlb_probe_entry(u32 **p)
+static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
 {
 	switch (current_cpu_type()) {
 	/* Found by experiment: R4600 v2.0 needs this, too.  */
@@ -245,7 +245,7 @@ static void __init __maybe_unused build_tlb_probe_entry(u32 **p)
  */
 enum tlb_write_entry { tlb_random, tlb_indexed };
 
-static void __init build_tlb_write_entry(u32 **p, struct uasm_label **l,
+static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 					 struct uasm_reloc **r,
 					 enum tlb_write_entry wmode)
 {
@@ -307,6 +307,7 @@ static void __init build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_R12000:
 	case CPU_R14000:
 	case CPU_4KC:
+	case CPU_4KEC:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_4KSC:
@@ -389,7 +390,7 @@ static void __init build_tlb_write_entry(u32 **p, struct uasm_label **l,
  * TMP and PTR are scratch.
  * TMP will be clobbered, PTR will hold the pmd entry.
  */
-static void __init
+static void __cpuinit
 build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		 unsigned int tmp, unsigned int ptr)
 {
@@ -450,7 +451,7 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
  * BVADDR is the faulting address, PTR is scratch.
  * PTR will hold the pgd for vmalloc.
  */
-static void __init
+static void __cpuinit
 build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 			unsigned int bvaddr, unsigned int ptr)
 {
@@ -522,7 +523,7 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
  * TMP and PTR are scratch.
  * TMP will be clobbered, PTR will hold the pgd entry.
  */
-static void __init __maybe_unused
+static void __cpuinit __maybe_unused
 build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 {
 	long pgdc = (long)pgd_current;
@@ -557,7 +558,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr)
 
 #endif /* !CONFIG_64BIT */
 
-static void __init build_adjust_context(u32 **p, unsigned int ctx)
+static void __cpuinit build_adjust_context(u32 **p, unsigned int ctx)
 {
 	unsigned int shift = 4 - (PTE_T_LOG2 + 1) + PAGE_SHIFT - 12;
 	unsigned int mask = (PTRS_PER_PTE / 2 - 1) << (PTE_T_LOG2 + 1);
@@ -583,7 +584,7 @@ static void __init build_adjust_context(u32 **p, unsigned int ctx)
 	uasm_i_andi(p, ctx, ctx, mask);
 }
 
-static void __init build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
+static void __cpuinit build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
 {
 	/*
 	 * Bug workaround for the Nevada. It seems as if under certain
@@ -608,7 +609,7 @@ static void __init build_get_ptep(u32 **p, unsigned int tmp, unsigned int ptr)
 	UASM_i_ADDU(p, ptr, ptr, tmp); /* add in offset */
 }
 
-static void __init build_update_entries(u32 **p, unsigned int tmp,
+static void __cpuinit build_update_entries(u32 **p, unsigned int tmp,
 					unsigned int ptep)
 {
 	/*
@@ -651,7 +652,7 @@ static void __init build_update_entries(u32 **p, unsigned int tmp,
 #endif
 }
 
-static void __init build_r4000_tlb_refill_handler(void)
+static void __cpuinit build_r4000_tlb_refill_handler(void)
 {
 	u32 *p = tlb_handler;
 	struct uasm_label *l = labels;
@@ -783,7 +784,7 @@ u32 handle_tlbl[FASTPATH_SIZE] __cacheline_aligned;
 u32 handle_tlbs[FASTPATH_SIZE] __cacheline_aligned;
 u32 handle_tlbm[FASTPATH_SIZE] __cacheline_aligned;
 
-static void __init
+static void __cpuinit
 iPTE_LW(u32 **p, struct uasm_label **l, unsigned int pte, unsigned int ptr)
 {
 #ifdef CONFIG_SMP
@@ -803,7 +804,7 @@ iPTE_LW(u32 **p, struct uasm_label **l, unsigned int pte, unsigned int ptr)
 #endif
 }
 
-static void __init
+static void __cpuinit
 iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
 	unsigned int mode)
 {
@@ -863,7 +864,7 @@ iPTE_SW(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr,
  * the page table where this PTE is located, PTE will be re-loaded
  * with it's original value.
  */
-static void __init
+static void __cpuinit
 build_pte_present(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		  unsigned int pte, unsigned int ptr, enum label_id lid)
 {
@@ -874,7 +875,7 @@ build_pte_present(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 }
 
 /* Make PTE valid, store result in PTR. */
-static void __init
+static void __cpuinit
 build_make_valid(u32 **p, struct uasm_reloc **r, unsigned int pte,
 		 unsigned int ptr)
 {
@@ -887,7 +888,7 @@ build_make_valid(u32 **p, struct uasm_reloc **r, unsigned int pte,
  * Check if PTE can be written to, if not branch to LABEL. Regardless
  * restore PTE with value from PTR when done.
  */
-static void __init
+static void __cpuinit
 build_pte_writable(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		   unsigned int pte, unsigned int ptr, enum label_id lid)
 {
@@ -900,7 +901,7 @@ build_pte_writable(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 /* Make PTE writable, update software status bits as well, then store
  * at PTR.
  */
-static void __init
+static void __cpuinit
 build_make_write(u32 **p, struct uasm_reloc **r, unsigned int pte,
 		 unsigned int ptr)
 {
@@ -914,7 +915,7 @@ build_make_write(u32 **p, struct uasm_reloc **r, unsigned int pte,
  * Check if PTE can be modified, if not branch to LABEL. Regardless
  * restore PTE with value from PTR when done.
  */
-static void __init
+static void __cpuinit
 build_pte_modifiable(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		     unsigned int pte, unsigned int ptr, enum label_id lid)
 {
@@ -931,7 +932,7 @@ build_pte_modifiable(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
  * This places the pte into ENTRYLO0 and writes it with tlbwi.
  * Then it returns.
  */
-static void __init
+static void __cpuinit
 build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
 {
 	uasm_i_mtc0(p, pte, C0_ENTRYLO0); /* cp0 delay */
@@ -947,7 +948,7 @@ build_r3000_pte_reload_tlbwi(u32 **p, unsigned int pte, unsigned int tmp)
  * may have the probe fail bit set as a result of a trap on a
  * kseg2 access, i.e. without refill.  Then it returns.
  */
-static void __init
+static void __cpuinit
 build_r3000_tlb_reload_write(u32 **p, struct uasm_label **l,
 			     struct uasm_reloc **r, unsigned int pte,
 			     unsigned int tmp)
@@ -965,7 +966,7 @@ build_r3000_tlb_reload_write(u32 **p, struct uasm_label **l,
 	uasm_i_rfe(p); /* branch delay */
 }
 
-static void __init
+static void __cpuinit
 build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte,
 				   unsigned int ptr)
 {
@@ -985,7 +986,7 @@ build_r3000_tlbchange_handler_head(u32 **p, unsigned int pte,
 	uasm_i_tlbp(p); /* load delay */
 }
 
-static void __init build_r3000_tlb_load_handler(void)
+static void __cpuinit build_r3000_tlb_load_handler(void)
 {
 	u32 *p = handle_tlbl;
 	struct uasm_label *l = labels;
@@ -1015,7 +1016,7 @@ static void __init build_r3000_tlb_load_handler(void)
 	dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl));
 }
 
-static void __init build_r3000_tlb_store_handler(void)
+static void __cpuinit build_r3000_tlb_store_handler(void)
 {
 	u32 *p = handle_tlbs;
 	struct uasm_label *l = labels;
@@ -1045,7 +1046,7 @@ static void __init build_r3000_tlb_store_handler(void)
 	dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs));
 }
 
-static void __init build_r3000_tlb_modify_handler(void)
+static void __cpuinit build_r3000_tlb_modify_handler(void)
 {
 	u32 *p = handle_tlbm;
 	struct uasm_label *l = labels;
@@ -1078,7 +1079,7 @@ static void __init build_r3000_tlb_modify_handler(void)
 /*
  * R4000 style TLB load/store/modify handlers.
  */
-static void __init
+static void __cpuinit
 build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l,
 				   struct uasm_reloc **r, unsigned int pte,
 				   unsigned int ptr)
@@ -1103,7 +1104,7 @@ build_r4000_tlbchange_handler_head(u32 **p, struct uasm_label **l,
 		build_tlb_probe_entry(p);
 }
 
-static void __init
+static void __cpuinit
 build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
 				   struct uasm_reloc **r, unsigned int tmp,
 				   unsigned int ptr)
@@ -1120,7 +1121,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
 #endif
 }
 
-static void __init build_r4000_tlb_load_handler(void)
+static void __cpuinit build_r4000_tlb_load_handler(void)
 {
 	u32 *p = handle_tlbl;
 	struct uasm_label *l = labels;
@@ -1160,7 +1161,7 @@ static void __init build_r4000_tlb_load_handler(void)
 	dump_handler(handle_tlbl, ARRAY_SIZE(handle_tlbl));
 }
 
-static void __init build_r4000_tlb_store_handler(void)
+static void __cpuinit build_r4000_tlb_store_handler(void)
 {
 	u32 *p = handle_tlbs;
 	struct uasm_label *l = labels;
@@ -1191,7 +1192,7 @@ static void __init build_r4000_tlb_store_handler(void)
 	dump_handler(handle_tlbs, ARRAY_SIZE(handle_tlbs));
 }
 
-static void __init build_r4000_tlb_modify_handler(void)
+static void __cpuinit build_r4000_tlb_modify_handler(void)
 {
 	u32 *p = handle_tlbm;
 	struct uasm_label *l = labels;
@@ -1223,7 +1224,7 @@ static void __init build_r4000_tlb_modify_handler(void)
 	dump_handler(handle_tlbm, ARRAY_SIZE(handle_tlbm));
 }
 
-void __init build_tlb_refill_handler(void)
+void __cpuinit build_tlb_refill_handler(void)
 {
 	/*
 	 * The refill handler is generated per-CPU, multi-node systems
@@ -1269,7 +1270,7 @@ void __init build_tlb_refill_handler(void)
 	}
 }
 
-void __init flush_tlb_handlers(void)
+void __cpuinit flush_tlb_handlers(void)
 {
 	flush_icache_range((unsigned long)handle_tlbl,
 			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index e3f74ed5f704..1a6f7704cc89 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -82,7 +82,7 @@ struct insn {
 	 | (e) << RE_SH						\
 	 | (f) << FUNC_SH)
 
-static struct insn insn_table[] __initdata = {
+static struct insn insn_table[] __cpuinitdata = {
 	{ insn_addiu, M(addiu_op, 0, 0, 0, 0, 0), RS | RT | SIMM },
 	{ insn_addu, M(spec_op, 0, 0, 0, 0, addu_op), RS | RT | RD },
 	{ insn_and, M(spec_op, 0, 0, 0, 0, and_op), RS | RT | RD },
@@ -135,7 +135,7 @@ static struct insn insn_table[] __initdata = {
 
 #undef M
 
-static inline __init u32 build_rs(u32 arg)
+static inline __cpuinit u32 build_rs(u32 arg)
 {
 	if (arg & ~RS_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -143,7 +143,7 @@ static inline __init u32 build_rs(u32 arg)
 	return (arg & RS_MASK) << RS_SH;
 }
 
-static inline __init u32 build_rt(u32 arg)
+static inline __cpuinit u32 build_rt(u32 arg)
 {
 	if (arg & ~RT_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -151,7 +151,7 @@ static inline __init u32 build_rt(u32 arg)
 	return (arg & RT_MASK) << RT_SH;
 }
 
-static inline __init u32 build_rd(u32 arg)
+static inline __cpuinit u32 build_rd(u32 arg)
 {
 	if (arg & ~RD_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -159,7 +159,7 @@ static inline __init u32 build_rd(u32 arg)
 	return (arg & RD_MASK) << RD_SH;
 }
 
-static inline __init u32 build_re(u32 arg)
+static inline __cpuinit u32 build_re(u32 arg)
 {
 	if (arg & ~RE_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -167,7 +167,7 @@ static inline __init u32 build_re(u32 arg)
 	return (arg & RE_MASK) << RE_SH;
 }
 
-static inline __init u32 build_simm(s32 arg)
+static inline __cpuinit u32 build_simm(s32 arg)
 {
 	if (arg > 0x7fff || arg < -0x8000)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -175,7 +175,7 @@ static inline __init u32 build_simm(s32 arg)
 	return arg & 0xffff;
 }
 
-static inline __init u32 build_uimm(u32 arg)
+static inline __cpuinit u32 build_uimm(u32 arg)
 {
 	if (arg & ~IMM_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -183,7 +183,7 @@ static inline __init u32 build_uimm(u32 arg)
 	return arg & IMM_MASK;
 }
 
-static inline __init u32 build_bimm(s32 arg)
+static inline __cpuinit u32 build_bimm(s32 arg)
 {
 	if (arg > 0x1ffff || arg < -0x20000)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -194,7 +194,7 @@ static inline __init u32 build_bimm(s32 arg)
 	return ((arg < 0) ? (1 << 15) : 0) | ((arg >> 2) & 0x7fff);
 }
 
-static inline __init u32 build_jimm(u32 arg)
+static inline __cpuinit u32 build_jimm(u32 arg)
 {
 	if (arg & ~((JIMM_MASK) << 2))
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -202,7 +202,7 @@ static inline __init u32 build_jimm(u32 arg)
 	return (arg >> 2) & JIMM_MASK;
 }
 
-static inline __init u32 build_func(u32 arg)
+static inline __cpuinit u32 build_func(u32 arg)
 {
 	if (arg & ~FUNC_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -210,7 +210,7 @@ static inline __init u32 build_func(u32 arg)
 	return arg & FUNC_MASK;
 }
 
-static inline __init u32 build_set(u32 arg)
+static inline __cpuinit u32 build_set(u32 arg)
 {
 	if (arg & ~SET_MASK)
 		printk(KERN_WARNING "Micro-assembler field overflow\n");
@@ -222,7 +222,7 @@ static inline __init u32 build_set(u32 arg)
  * The order of opcode arguments is implicitly left to right,
  * starting with RS and ending with FUNC or IMM.
  */
-static void __init build_insn(u32 **buf, enum opcode opc, ...)
+static void __cpuinit build_insn(u32 **buf, enum opcode opc, ...)
 {
 	struct insn *ip = NULL;
 	unsigned int i;
@@ -375,14 +375,14 @@ I_u3u1u2(_xor)
 I_u2u1u3(_xori)
 
 /* Handle labels. */
-void __init uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
+void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid)
 {
 	(*lab)->addr = addr;
 	(*lab)->lab = lid;
 	(*lab)++;
 }
 
-int __init uasm_in_compat_space_p(long addr)
+int __cpuinit uasm_in_compat_space_p(long addr)
 {
 	/* Is this address in 32bit compat space? */
 #ifdef CONFIG_64BIT
@@ -392,7 +392,7 @@ int __init uasm_in_compat_space_p(long addr)
 #endif
 }
 
-int __init uasm_rel_highest(long val)
+int __cpuinit uasm_rel_highest(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
@@ -401,7 +401,7 @@ int __init uasm_rel_highest(long val)
 #endif
 }
 
-int __init uasm_rel_higher(long val)
+int __cpuinit uasm_rel_higher(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
@@ -410,17 +410,17 @@ int __init uasm_rel_higher(long val)
 #endif
 }
 
-int __init uasm_rel_hi(long val)
+int __cpuinit uasm_rel_hi(long val)
 {
 	return ((((val + 0x8000L) >> 16) & 0xffff) ^ 0x8000) - 0x8000;
 }
 
-int __init uasm_rel_lo(long val)
+int __cpuinit uasm_rel_lo(long val)
 {
 	return ((val & 0xffff) ^ 0x8000) - 0x8000;
 }
 
-void __init UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
+void __cpuinit UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
 {
 	if (!uasm_in_compat_space_p(addr)) {
 		uasm_i_lui(buf, rs, uasm_rel_highest(addr));
@@ -436,7 +436,7 @@ void __init UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr)
 		uasm_i_lui(buf, rs, uasm_rel_hi(addr));
 }
 
-void __init UASM_i_LA(u32 **buf, unsigned int rs, long addr)
+void __cpuinit UASM_i_LA(u32 **buf, unsigned int rs, long addr)
 {
 	UASM_i_LA_mostly(buf, rs, addr);
 	if (uasm_rel_lo(addr)) {
@@ -448,7 +448,7 @@ void __init UASM_i_LA(u32 **buf, unsigned int rs, long addr)
 }
 
 /* Handle relocations. */
-void __init
+void __cpuinit
 uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid)
 {
 	(*rel)->addr = addr;
@@ -457,7 +457,7 @@ uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid)
 	(*rel)++;
 }
 
-static inline void __init
+static inline void __cpuinit
 __resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 {
 	long laddr = (long)lab->addr;
@@ -474,7 +474,7 @@ __resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 	}
 }
 
-void __init
+void __cpuinit
 uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 {
 	struct uasm_label *l;
@@ -485,7 +485,7 @@ uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab)
 				__resolve_relocs(rel, l);
 }
 
-void __init
+void __cpuinit
 uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off)
 {
 	for (; rel->lab != UASM_LABEL_INVALID; rel++)
@@ -493,7 +493,7 @@ uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off)
 			rel->addr += off;
 }
 
-void __init
+void __cpuinit
 uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off)
 {
 	for (; lab->lab != UASM_LABEL_INVALID; lab++)
@@ -501,7 +501,7 @@ uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off)
 			lab->addr += off;
 }
 
-void __init
+void __cpuinit
 uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
 		  u32 *end, u32 *target)
 {
@@ -513,7 +513,7 @@ uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
 	uasm_move_labels(lab, first, end, off);
 }
 
-int __init uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
+int __cpuinit uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
 {
 	for (; rel->lab != UASM_LABEL_INVALID; rel++) {
 		if (rel->addr == addr
@@ -526,49 +526,49 @@ int __init uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr)
 }
 
 /* Convenience functions for labeled branches. */
-void __init
+void __cpuinit
 uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bltz(p, reg, 0);
 }
 
-void __init
+void __cpuinit
 uasm_il_b(u32 **p, struct uasm_reloc **r, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_b(p, 0);
 }
 
-void __init
+void __cpuinit
 uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_beqz(p, reg, 0);
 }
 
-void __init
+void __cpuinit
 uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_beqzl(p, reg, 0);
 }
 
-void __init
+void __cpuinit
 uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bnez(p, reg, 0);
 }
 
-void __init
+void __cpuinit
 uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
 	uasm_i_bgezl(p, reg, 0);
 }
 
-void __init
+void __cpuinit
 uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid)
 {
 	uasm_r_mips_pc16(r, *p, lid);
diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h
index a10fc1135c76..fe0574f6e77d 100644
--- a/arch/mips/mm/uasm.h
+++ b/arch/mips/mm/uasm.h
@@ -11,38 +11,38 @@
 #include <linux/types.h>
 
 #define Ip_u1u2u3(op)							\
-void __init								\
+void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
 #define Ip_u2u1u3(op)							\
-void __init								\
+void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
 #define Ip_u3u1u2(op)							\
-void __init								\
+void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, unsigned int c)
 
 #define Ip_u1u2s3(op)							\
-void __init								\
+void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
 
 #define Ip_u2s3u1(op)							\
-void __init								\
+void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, signed int b, unsigned int c)
 
 #define Ip_u2u1s3(op)							\
-void __init								\
+void __cpuinit								\
 uasm_i##op(u32 **buf, unsigned int a, unsigned int b, signed int c)
 
 #define Ip_u1u2(op)							\
-void __init uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, unsigned int b)
 
 #define Ip_u1s2(op)							\
-void __init uasm_i##op(u32 **buf, unsigned int a, signed int b)
+void __cpuinit uasm_i##op(u32 **buf, unsigned int a, signed int b)
 
-#define Ip_u1(op) void __init uasm_i##op(u32 **buf, unsigned int a)
+#define Ip_u1(op) void __cpuinit uasm_i##op(u32 **buf, unsigned int a)
 
-#define Ip_0(op) void __init uasm_i##op(u32 **buf)
+#define Ip_0(op) void __cpuinit uasm_i##op(u32 **buf)
 
 Ip_u2u1s3(_addiu);
 Ip_u3u1u2(_addu);
@@ -98,19 +98,19 @@ struct uasm_label {
 	int lab;
 };
 
-void __init uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
+void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
 #ifdef CONFIG_64BIT
-int __init uasm_in_compat_space_p(long addr);
-int __init uasm_rel_highest(long val);
-int __init uasm_rel_higher(long val);
+int uasm_in_compat_space_p(long addr);
+int uasm_rel_highest(long val);
+int uasm_rel_higher(long val);
 #endif
-int __init uasm_rel_hi(long val);
-int __init uasm_rel_lo(long val);
-void __init UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
-void __init UASM_i_LA(u32 **buf, unsigned int rs, long addr);
+int uasm_rel_hi(long val);
+int uasm_rel_lo(long val);
+void UASM_i_LA_mostly(u32 **buf, unsigned int rs, long addr);
+void UASM_i_LA(u32 **buf, unsigned int rs, long addr);
 
 #define UASM_L_LA(lb)							\
-static inline void __init uasm_l##lb(struct uasm_label **lab, u32 *addr) \
+static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
 {									\
 	uasm_build_label(lab, addr, label##lb);				\
 }
@@ -164,29 +164,19 @@ struct uasm_reloc {
 /* This is zero so we can use zeroed label arrays. */
 #define UASM_LABEL_INVALID 0
 
-void __init uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
-void __init
-uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
-void __init
-uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
-void __init
-uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
-void __init
-uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab, u32 *first,
-		  u32 *end, u32 *target);
-int __init uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
+void uasm_r_mips_pc16(struct uasm_reloc **rel, u32 *addr, int lid);
+void uasm_resolve_relocs(struct uasm_reloc *rel, struct uasm_label *lab);
+void uasm_move_relocs(struct uasm_reloc *rel, u32 *first, u32 *end, long off);
+void uasm_move_labels(struct uasm_label *lab, u32 *first, u32 *end, long off);
+void uasm_copy_handler(struct uasm_reloc *rel, struct uasm_label *lab,
+	u32 *first, u32 *end, u32 *target);
+int uasm_insn_has_bdelay(struct uasm_reloc *rel, u32 *addr);
 
 /* Convenience functions for labeled branches. */
-void __init
-uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
-void __init
-uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
-void __init
-uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bltz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_b(u32 **p, struct uasm_reloc **r, int lid);
+void uasm_il_beqz(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_beqzl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bnez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgezl(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
+void uasm_il_bgez(u32 **p, struct uasm_reloc **r, unsigned int reg, int lid);
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 30ed36125bcd..87e2c8f54e2d 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -185,8 +185,8 @@ static struct resource bcm1480_mem_resource = {
 
 static struct resource bcm1480_io_resource = {
 	.name	= "BCM1480 PCI I/O",
-	.start	= 0x2c000000UL,
-	.end	= 0x2dffffffUL,
+	.start	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
+	.end	= A_BCM1480_PHYS_PCI_IO_MATCH_BYTES + 0x1ffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -194,6 +194,7 @@ struct pci_controller bcm1480_controller = {
 	.pci_ops	= &bcm1480_pci_ops,
 	.mem_resource	= &bcm1480_mem_resource,
 	.io_resource	= &bcm1480_io_resource,
+	.io_offset      = A_BCM1480_PHYS_PCI_IO_MATCH_BYTES,
 };
 
 
@@ -249,8 +250,10 @@ static int __init bcm1480_pcibios_init(void)
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
 
-	set_io_port_base((unsigned long)
-		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536));
+	bcm1480_controller.io_map_base = (unsigned long)
+		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
+	bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
+	set_io_port_base(bcm1480_controller.io_map_base);
 	isa_slot_offset = (unsigned long)
 		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
 
diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
index 005e7fecab08..f54f45412b0b 100644
--- a/arch/mips/pci/pci-bcm1480ht.c
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -180,8 +180,8 @@ static struct resource bcm1480ht_mem_resource = {
 
 static struct resource bcm1480ht_io_resource = {
 	.name	= "BCM1480 HT I/O",
-	.start	= 0x00000000UL,
-	.end	= 0x01ffffffUL,
+	.start	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
+	.end	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
 	.flags	= IORESOURCE_IO,
 };
 
@@ -191,29 +191,22 @@ struct pci_controller bcm1480ht_controller = {
 	.io_resource	= &bcm1480ht_io_resource,
 	.index		= 1,
 	.get_busno	= bcm1480ht_pcibios_get_busno,
+	.io_offset      = A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
 };
 
 static int __init bcm1480ht_pcibios_init(void)
 {
-	uint32_t cmdreg;
-
 	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
 
-	/*
-	 * See if the PCI bus has been configured by the firmware.
-	 */
-	cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
-				     PCI_COMMAND));
-	if (!(cmdreg & PCI_COMMAND_MASTER)) {
-		printk("HT: Skipping HT probe. Bus is not initialized.\n");
-		iounmap(ht_cfg_space);
-		return 1; /* XXX */
-	}
+	/* CFE doesn't always init all HT paths, so we always scan */
 	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
 
 	ht_eoi_space = (unsigned long)
 		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
 			4 * 1024 * 1024);
+	bcm1480ht_controller.io_map_base = (unsigned long)
+		ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
+	bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
 
 	register_pci_controller(&bcm1480ht_controller);
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index a322543ac34e..bb64828a92fe 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -40,7 +40,7 @@ int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS];
 
 extern struct pci_ops bridge_pci_ops;
 
-int __init bridge_probe(nasid_t nasid, int widget_id, int masterwid)
+int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
 {
 	unsigned long offset = NODE_OFFSET(nasid);
 	struct bridge_controller *bc;
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index f9471d77c096..358ad6210949 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -260,7 +260,7 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev,
 	}
 }
 
-void pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 {
 	/* Propagate hose info into the subordinate devices.  */
 
diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c
index 653f3ec61cab..3a7df647ca77 100644
--- a/arch/mips/pmc-sierra/yosemite/smp.c
+++ b/arch/mips/pmc-sierra/yosemite/smp.c
@@ -7,10 +7,10 @@
 
 #define LAUNCHSTACK_SIZE 256
 
-static __initdata DEFINE_SPINLOCK(launch_lock);
+static __cpuinitdata DEFINE_SPINLOCK(launch_lock);
 
-static unsigned long secondary_sp __initdata;
-static unsigned long secondary_gp __initdata;
+static unsigned long secondary_sp __cpuinitdata;
+static unsigned long secondary_gp __cpuinitdata;
 
 static unsigned char launchstack[LAUNCHSTACK_SIZE] __initdata
 	__attribute__((aligned(2 * sizeof(long))));
diff --git a/arch/mips/sgi-ip27/ip27-console.c b/arch/mips/sgi-ip27/ip27-console.c
index 3ba830651c58..984e561f0f7a 100644
--- a/arch/mips/sgi-ip27/ip27-console.c
+++ b/arch/mips/sgi-ip27/ip27-console.c
@@ -8,7 +8,6 @@
 #include <linux/init.h>
 
 #include <asm/page.h>
-#include <asm/semaphore.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/sn0/hub.h>
 #include <asm/sn/klconfig.h>
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index a49e7c85f724..7093e7c573a4 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -53,7 +53,7 @@ extern void pcibr_setup(cnodeid_t);
 
 extern void xtalk_probe_node(cnodeid_t nid);
 
-static void __init per_hub_init(cnodeid_t cnode)
+static void __cpuinit per_hub_init(cnodeid_t cnode)
 {
 	struct hub_data *hub = hub_data(cnode);
 	nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode);
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 08d45369be45..25d3baf0ebc4 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -285,7 +285,7 @@ void __cpuinit cpu_time_init(void)
 	set_c0_status(SRB_TIMOCLK);
 }
 
-void __init hub_rtc_init(cnodeid_t cnode)
+void __cpuinit hub_rtc_init(cnodeid_t cnode)
 {
 	/*
 	 * We only need to initialize the current node.
diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c
index fc82f34a32ce..6ae64e8dfc40 100644
--- a/arch/mips/sgi-ip27/ip27-xtalk.c
+++ b/arch/mips/sgi-ip27/ip27-xtalk.c
@@ -22,7 +22,7 @@
 
 extern int bridge_probe(nasid_t nasid, int widget, int masterwid);
 
-static int __init probe_one_port(nasid_t nasid, int widget, int masterwid)
+static int __cpuinit probe_one_port(nasid_t nasid, int widget, int masterwid)
 {
 	widgetreg_t 		widget_id;
 	xwidget_part_num_t	partnum;
@@ -46,7 +46,7 @@ static int __init probe_one_port(nasid_t nasid, int widget, int masterwid)
 	return 0;
 }
 
-static int __init xbow_probe(nasid_t nasid)
+static int __cpuinit xbow_probe(nasid_t nasid)
 {
 	lboard_t *brd;
 	klxbow_t *xbow_p;
@@ -99,7 +99,7 @@ static int __init xbow_probe(nasid_t nasid)
 	return 0;
 }
 
-void __init xtalk_probe_node(cnodeid_t nid)
+void __cpuinit xtalk_probe_node(cnodeid_t nid)
 {
 	volatile u64 		hubreg;
 	nasid_t	 		nasid;
diff --git a/arch/mn10300/kernel/Makefile b/arch/mn10300/kernel/Makefile
index ef07c956170a..23f2ab67574c 100644
--- a/arch/mn10300/kernel/Makefile
+++ b/arch/mn10300/kernel/Makefile
@@ -3,7 +3,7 @@
 #
 extra-y := head.o init_task.o vmlinux.lds
 
-obj-y   := process.o semaphore.o signal.o entry.o fpu.o traps.o irq.o \
+obj-y   := process.o signal.o entry.o fpu.o traps.o irq.o \
 	   ptrace.o setup.o time.o sys_mn10300.o io.o kthread.o \
 	   switch_to.o mn10300_ksyms.o kernel_execve.o
 
diff --git a/arch/mn10300/kernel/semaphore.c b/arch/mn10300/kernel/semaphore.c
deleted file mode 100644
index 9153c4039fd2..000000000000
--- a/arch/mn10300/kernel/semaphore.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/* MN10300 Semaphore implementation
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <asm/semaphore.h>
-
-struct sem_waiter {
-	struct list_head	list;
-	struct task_struct	*task;
-};
-
-#if SEMAPHORE_DEBUG
-void semtrace(struct semaphore *sem, const char *str)
-{
-	if (sem->debug)
-		printk(KERN_DEBUG "[%d] %s({%d,%d})\n",
-		       current->pid,
-		       str,
-		       atomic_read(&sem->count),
-		       list_empty(&sem->wait_list) ? 0 : 1);
-}
-#else
-#define semtrace(SEM, STR) do { } while (0)
-#endif
-
-/*
- * wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __down(struct semaphore *sem, unsigned long flags)
-{
-	struct task_struct *tsk = current;
-	struct sem_waiter waiter;
-
-	semtrace(sem, "Entering __down");
-
-	/* set up my own style of waitqueue */
-	waiter.task = tsk;
-	get_task_struct(tsk);
-
-	list_add_tail(&waiter.list, &sem->wait_list);
-
-	/* we don't need to touch the semaphore struct anymore */
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
-
-	/* wait to be given the semaphore */
-	set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-
-	for (;;) {
-		if (!waiter.task)
-			break;
-		schedule();
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	}
-
-	tsk->state = TASK_RUNNING;
-	semtrace(sem, "Leaving __down");
-}
-EXPORT_SYMBOL(__down);
-
-/*
- * interruptibly wait for a token to be granted from a semaphore
- * - entered with lock held and interrupts disabled
- */
-int __down_interruptible(struct semaphore *sem, unsigned long flags)
-{
-	struct task_struct *tsk = current;
-	struct sem_waiter waiter;
-	int ret;
-
-	semtrace(sem, "Entering __down_interruptible");
-
-	/* set up my own style of waitqueue */
-	waiter.task = tsk;
-	get_task_struct(tsk);
-
-	list_add_tail(&waiter.list, &sem->wait_list);
-
-	/* we don't need to touch the semaphore struct anymore */
-	set_task_state(tsk, TASK_INTERRUPTIBLE);
-
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
-
-	/* wait to be given the semaphore */
-	ret = 0;
-	for (;;) {
-		if (!waiter.task)
-			break;
-		if (unlikely(signal_pending(current)))
-			goto interrupted;
-		schedule();
-		set_task_state(tsk, TASK_INTERRUPTIBLE);
-	}
-
- out:
-	tsk->state = TASK_RUNNING;
-	semtrace(sem, "Leaving __down_interruptible");
-	return ret;
-
- interrupted:
-	spin_lock_irqsave(&sem->wait_lock, flags);
-	list_del(&waiter.list);
-	spin_unlock_irqrestore(&sem->wait_lock, flags);
-
-	ret = 0;
-	if (!waiter.task) {
-		put_task_struct(current);
-		ret = -EINTR;
-	}
-	goto out;
-}
-EXPORT_SYMBOL(__down_interruptible);
-
-/*
- * release a single token back to a semaphore
- * - entered with lock held and interrupts disabled
- */
-void __up(struct semaphore *sem)
-{
-	struct task_struct *tsk;
-	struct sem_waiter *waiter;
-
-	semtrace(sem, "Entering __up");
-
-	/* grant the token to the process at the front of the queue */
-	waiter = list_entry(sem->wait_list.next, struct sem_waiter, list);
-
-	/* We must be careful not to touch 'waiter' after we set ->task = NULL.
-	 * It is an allocated on the waiter's stack and may become invalid at
-	 * any time after that point (due to a wakeup from another source).
-	 */
-	list_del_init(&waiter->list);
-	tsk = waiter->task;
-	smp_mb();
-	waiter->task = NULL;
-	wake_up_process(tsk);
-	put_task_struct(tsk);
-
-	semtrace(sem, "Leaving __up");
-}
-EXPORT_SYMBOL(__up);
diff --git a/arch/mn10300/unit-asb2305/pci-asb2305.h b/arch/mn10300/unit-asb2305/pci-asb2305.h
index 84634fa3bce6..9763d1ce343a 100644
--- a/arch/mn10300/unit-asb2305/pci-asb2305.h
+++ b/arch/mn10300/unit-asb2305/pci-asb2305.h
@@ -23,8 +23,6 @@
 #define PCI_PROBE_BIOS 1
 #define PCI_PROBE_CONF1 2
 #define PCI_PROBE_CONF2 4
-#define PCI_NO_SORT 0x100
-#define PCI_BIOS_SORT 0x200
 #define PCI_NO_CHECKS 0x400
 #define PCI_ASSIGN_ROMS 0x1000
 #define PCI_BIOS_IRQ_SCAN 0x2000
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index e574de4efb36..5ddad7bd60ac 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -16,6 +16,9 @@
 # Modified for PA-RISC Linux by Paul Lahaie, Alex deVries, 
 # Mike Shaver, Helge Deller and Martin K. Petersen
 #
+
+KBUILD_DEFCONFIG := default_defconfig
+
 NM		= sh $(srctree)/arch/parisc/nm
 CHECKFLAGS	+= -D__hppa__=1
 
diff --git a/arch/parisc/defconfig b/arch/parisc/configs/default_defconfig
index 448a757b06c6..448a757b06c6 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/configs/default_defconfig
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 27827bc3717e..1f6585a56f97 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -9,7 +9,7 @@ AFLAGS_pacache.o := -traditional
 
 obj-y	     	:= cache.o pacache.o setup.o traps.o time.o irq.o \
 		   pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
-		   ptrace.o hardware.o inventory.o drivers.o semaphore.o \
+		   ptrace.o hardware.o inventory.o drivers.o \
 		   signal.o hpmc.o real2.o parisc_ksyms.o unaligned.o \
 		   process.o processor.o pdc_cons.o pdc_chassis.o unwind.o \
 		   topology.o
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index 4ab83d56974d..7177a6cd1b7f 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -1080,6 +1080,9 @@ void pdc_io_reset_devices(void)
 	spin_unlock_irqrestore(&pdc_lock, flags);
 }
 
+/* locked by pdc_console_lock */
+static int __attribute__((aligned(8)))   iodc_retbuf[32];
+static char __attribute__((aligned(64))) iodc_dbuf[4096];
 
 /**
  * pdc_iodc_print - Console print using IODC.
@@ -1091,24 +1094,20 @@ void pdc_io_reset_devices(void)
  * Since the HP console requires CR+LF to perform a 'newline', we translate
  * "\n" to "\r\n".
  */
-int pdc_iodc_print(unsigned char *str, unsigned count)
+int pdc_iodc_print(const unsigned char *str, unsigned count)
 {
-	/* XXX Should we spinlock posx usage */
 	static int posx;        /* for simple TAB-Simulation... */
-	int __attribute__((aligned(8)))   iodc_retbuf[32];
-	char __attribute__((aligned(64))) iodc_dbuf[4096];
 	unsigned int i;
 	unsigned long flags;
 
-	memset(iodc_dbuf, 0, 4096);
-	for (i = 0; i < count && i < 2048;) {
+	for (i = 0; i < count && i < 79;) {
 		switch(str[i]) {
 		case '\n':
 			iodc_dbuf[i+0] = '\r';
 			iodc_dbuf[i+1] = '\n';
 			i += 2;
 			posx = 0;
-			break;
+			goto print;
 		case '\t':
 			while (posx & 7) {
 				iodc_dbuf[i] = ' ';
@@ -1124,6 +1123,16 @@ int pdc_iodc_print(unsigned char *str, unsigned count)
 		}
 	}
 
+	/* if we're at the end of line, and not already inserting a newline,
+	 * insert one anyway. iodc console doesn't claim to support >79 char
+	 * lines. don't account for this in the return value.
+	 */
+	if (i == 79 && iodc_dbuf[i-1] != '\n') {
+		iodc_dbuf[i+0] = '\r';
+		iodc_dbuf[i+1] = '\n';
+	}
+
+print:
         spin_lock_irqsave(&pdc_lock, flags);
         real32_call(PAGE0->mem_cons.iodc_io,
                     (unsigned long)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
@@ -1142,11 +1151,9 @@ int pdc_iodc_print(unsigned char *str, unsigned count)
  */
 int pdc_iodc_getc(void)
 {
-	unsigned long flags;
-        static int __attribute__((aligned(8)))   iodc_retbuf[32];
-        static char __attribute__((aligned(64))) iodc_dbuf[4096];
 	int ch;
 	int status;
+	unsigned long flags;
 
 	/* Bail if no console input device. */
 	if (!PAGE0->mem_kbd.iodc_io)
diff --git a/arch/parisc/kernel/hardware.c b/arch/parisc/kernel/hardware.c
index 84b9611a9228..f48a640b55fb 100644
--- a/arch/parisc/kernel/hardware.c
+++ b/arch/parisc/kernel/hardware.c
@@ -274,7 +274,18 @@ static struct hp_hardware hp_hardware_list[] __devinitdata = {
 	{HPHW_NPROC,0x887,0x4,0x91,"Storm Peak Slow"},
 	{HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"},
 	{HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"},
-	{HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak"},
+	{HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"},
+	{HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"},
+	{HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"},
+	{HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"},
+	{HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"},
+	{HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"},
+	{HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"},
+	{HPHW_NPROC,0x897,0x4,0x91,"Storm Peak DC- Slow Mako+"},
+	{HPHW_NPROC,0x898,0x4,0x91,"Storm Peak DC- Fast Mako+"},
+	{HPHW_NPROC,0x899,0x4,0x91,"Mt. Hamilton Slow Mako+"},
+	{HPHW_NPROC,0x89B,0x4,0x91,"Crestone Peak Mako+ Slow"},
+	{HPHW_NPROC,0x89C,0x4,0x91,"Crestone Peak Mako+ Fast"},
 	{HPHW_A_DIRECT, 0x004, 0x0000D, 0x00, "Arrakis MUX"}, 
 	{HPHW_A_DIRECT, 0x005, 0x0000D, 0x00, "Dyun Kiuh MUX"}, 
 	{HPHW_A_DIRECT, 0x006, 0x0000D, 0x00, "Baat Kiuh AP/MUX (40299B)"}, 
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index a7b8859488bb..ec2482dc1beb 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -20,10 +20,11 @@
 #include <asm/pgtable.h>
 
 #include <linux/linkage.h>
+#include <linux/init.h>
 
 	.level	LEVEL
 
-	.data
+	__INITDATA
 ENTRY(boot_args)
 	.word 0 /* arg0 */
 	.word 0 /* arg1 */
@@ -31,7 +32,7 @@ ENTRY(boot_args)
 	.word 0 /* arg3 */
 END(boot_args)
 
-	.text
+	.section .text.head
 	.align	4
 	.import init_thread_union,data
 	.import fault_vector_20,code    /* IVA parisc 2.0 32 bit */
@@ -343,7 +344,7 @@ smp_slave_stext:
 ENDPROC(stext)
 
 #ifndef CONFIG_64BIT
-	.data
+	.section .data.read_mostly
 
 	.align	4
 	.export	$global$,data
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 7aca704e96f0..5b7fc4aa044d 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -69,11 +69,6 @@ EXPORT_SYMBOL(memcpy_toio);
 EXPORT_SYMBOL(memcpy_fromio);
 EXPORT_SYMBOL(memset_io);
 
-#include <asm/semaphore.h>
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down);
-
 extern void $$divI(void);
 extern void $$divU(void);
 extern void $$remI(void);
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index 507d0ac99f66..6936386c9861 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -287,23 +287,15 @@ void pcibios_align_resource(void *data, struct resource *res,
  */
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd;
-	int idx;
+	int err;
+	u16 cmd, old_cmd;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	for (idx = 0; idx < DEVICE_COUNT_RESOURCE; idx++) {
-		struct resource *r = &dev->resource[idx];
+	err = pci_enable_resources(dev, mask);
+	if (err < 0)
+		return err;
 
-		/* only setup requested resources */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
+	pci_read_config_word(dev, PCI_COMMAND, &cmd);
+	old_cmd = cmd;
 
 	cmd |= (PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
 
@@ -312,8 +304,12 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	if (dev->bus->bridge_ctl & PCI_BRIDGE_CTL_FAST_BACK)
 		cmd |= PCI_COMMAND_FAST_BACK;
 #endif
-	DBGC("PCIBIOS: Enabling device %s cmd 0x%04x\n", pci_name(dev), cmd);
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
+
+	if (cmd != old_cmd) {
+		dev_info(&dev->dev, "enabling SERR and PARITY (%04x -> %04x)\n",
+			old_cmd, cmd);
+		pci_write_config_word(dev, PCI_COMMAND, cmd);
+	}
 	return 0;
 }
 
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 33b1f84441b1..ccb68090781e 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -52,28 +52,30 @@
 #include <linux/tty.h>
 #include <asm/pdc.h>		/* for iodc_call() proto and friends */
 
+static spinlock_t pdc_console_lock = SPIN_LOCK_UNLOCKED;
 
 static void pdc_console_write(struct console *co, const char *s, unsigned count)
 {
-	pdc_iodc_print(s, count);
+	int i = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdc_console_lock, flags);
+	do {
+		i += pdc_iodc_print(s + i, count - i);
+	} while (i < count);
+	spin_unlock_irqrestore(&pdc_console_lock, flags);
 }
 
-void pdc_printf(const char *fmt, ...)
+int pdc_console_poll_key(struct console *co)
 {
-	va_list args;
-	char buf[1024];
-	int i, len;
-
-	va_start(args, fmt);
-	len = vscnprintf(buf, sizeof(buf), fmt, args);
-	va_end(args);
+	int c;
+	unsigned long flags;
 
-	pdc_iodc_print(buf, len);
-}
+	spin_lock_irqsave(&pdc_console_lock, flags);
+	c = pdc_iodc_getc();
+	spin_unlock_irqrestore(&pdc_console_lock, flags);
 
-int pdc_console_poll_key(struct console *co)
-{
-	return pdc_iodc_getc();
+	return c;
 }
 
 static int pdc_console_setup(struct console *co, char *options)
diff --git a/arch/parisc/kernel/semaphore.c b/arch/parisc/kernel/semaphore.c
deleted file mode 100644
index ee806bcc3726..000000000000
--- a/arch/parisc/kernel/semaphore.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Semaphore implementation Copyright (c) 2001 Matthew Wilcox, Hewlett-Packard
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-/*
- * Semaphores are complex as we wish to avoid using two variables.
- * `count' has multiple roles, depending on its value.  If it is positive
- * or zero, there are no waiters.  The functions here will never be
- * called; see <asm/semaphore.h>
- *
- * When count is -1 it indicates there is at least one task waiting
- * for the semaphore.
- *
- * When count is less than that, there are '- count - 1' wakeups
- * pending.  ie if it has value -3, there are 2 wakeups pending.
- *
- * Note that these functions are only called when there is contention
- * on the lock, and as such all this is the "non-critical" part of the
- * whole semaphore business. The critical part is the inline stuff in
- * <asm/semaphore.h> where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	sem->count--;
-	wake_up(&sem->wait);
-}
-
-#define wakers(count) (-1 - count)
-
-#define DOWN_HEAD							\
-	int ret = 0;							\
-	DECLARE_WAITQUEUE(wait, current);				\
-									\
-	/* Note that someone is waiting */				\
-	if (sem->count == 0)						\
-		sem->count = -1;					\
-									\
-	/* protected by the sentry still -- use unlocked version */	\
-	wait.flags = WQ_FLAG_EXCLUSIVE;					\
-	__add_wait_queue_tail(&sem->wait, &wait);			\
- lost_race:								\
-	spin_unlock_irq(&sem->sentry);					\
-
-#define DOWN_TAIL							\
-	spin_lock_irq(&sem->sentry);					\
-	if (wakers(sem->count) == 0 && ret == 0)			\
-		goto lost_race;	/* Someone stole our wakeup */		\
-	__remove_wait_queue(&sem->wait, &wait);				\
-	current->state = TASK_RUNNING;					\
-	if (!waitqueue_active(&sem->wait) && (sem->count < 0))		\
-		sem->count = wakers(sem->count);
-
-#define UPDATE_COUNT							\
-	sem->count += (sem->count < 0) ? 1 : - 1;
-	
-
-void __sched __down(struct semaphore * sem)
-{
-	DOWN_HEAD
-
-	for(;;) {
-		set_task_state(current, TASK_UNINTERRUPTIBLE);
-		/* we can _read_ this without the sentry */
-		if (sem->count != -1)
-			break;
- 		schedule();
- 	}
-
-	DOWN_TAIL
-	UPDATE_COUNT
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	DOWN_HEAD
-
-	for(;;) {
-		set_task_state(current, TASK_INTERRUPTIBLE);
-		/* we can _read_ this without the sentry */
-		if (sem->count != -1)
-			break;
-
-		if (signal_pending(current)) {
-			ret = -EINTR;
-			break;
-		}
-		schedule();
-	}
-
-	DOWN_TAIL
-
-	if (!ret) {
-		UPDATE_COUNT
-	}
-
-	return ret;
-}
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 58fccc96d003..06213d1d6d95 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -534,7 +534,8 @@ insert_restart_trampoline(struct pt_regs *regs)
 		 * Flushing one cacheline is cheap.
 		 * "sync" on bigger (> 4 way) boxes is not.
 		 */
-		flush_icache_range(regs->gr[30], regs->gr[30] + 4);
+		flush_user_dcache_range(regs->gr[30], regs->gr[30] + 4);
+		flush_user_icache_range(regs->gr[30], regs->gr[30] + 4);
 
 		regs->gr[31] = regs->gr[30] + 8;
 		/* Preserve original r28. */
diff --git a/arch/parisc/kernel/sys_parisc32.c b/arch/parisc/kernel/sys_parisc32.c
index 50bbf33ee00c..71efd6a28e2a 100644
--- a/arch/parisc/kernel/sys_parisc32.c
+++ b/arch/parisc/kernel/sys_parisc32.c
@@ -49,7 +49,6 @@
 
 #include <asm/types.h>
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <asm/mmu_context.h>
 
 #include "sys32.h"
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index 117438e9eb2a..6b5ac38f5a99 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -401,9 +401,12 @@
 	ENTRY_COMP(kexec_load)		/* 300 */
 	ENTRY_COMP(utimensat)
 	ENTRY_COMP(signalfd)
-	ENTRY_COMP(timerfd)
+	ENTRY_SAME(ni_syscall)		/* was timerfd */
 	ENTRY_SAME(eventfd)
 	ENTRY_COMP(fallocate)		/* 305 */
+	ENTRY_SAME(timerfd_create)
+	ENTRY_COMP(timerfd_settime)
+	ENTRY_COMP(timerfd_gettime)
 
 	/* Nothing yet */
 
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 99fd56939afa..9dc6dc42f9cf 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -51,6 +51,9 @@
 DEFINE_SPINLOCK(pa_dbit_lock);
 #endif
 
+void parisc_show_stack(struct task_struct *t, unsigned long *sp,
+	struct pt_regs *regs);
+
 static int printbinary(char *buf, unsigned long x, int nbits)
 {
 	unsigned long mask = 1UL << (nbits - 1);
@@ -148,6 +151,8 @@ void show_regs(struct pt_regs *regs)
 	print_symbol(" IAOQ[1]: %s\n", regs->iaoq[1]);
 	printk(level);
 	print_symbol(" RP(r2): %s\n", regs->gr[2]);
+
+	parisc_show_stack(current, NULL, regs);
 }
 
 
@@ -181,11 +186,19 @@ static void do_show_stack(struct unwind_frame_info *info)
 	printk("\n");
 }
 
-void show_stack(struct task_struct *task, unsigned long *s)
+void parisc_show_stack(struct task_struct *task, unsigned long *sp,
+	struct pt_regs *regs)
 {
 	struct unwind_frame_info info;
+	struct task_struct *t;
+
+	t = task ? task : current;
+	if (regs) {
+		unwind_frame_init(&info, t, regs);
+		goto show_stack;
+	}
 
-	if (!task) {
+	if (t == current) {
 		unsigned long sp;
 
 HERE:
@@ -201,12 +214,18 @@ HERE:
 			unwind_frame_init(&info, current, &r);
 		}
 	} else {
-		unwind_frame_init_from_blocked_task(&info, task);
+		unwind_frame_init_from_blocked_task(&info, t);
 	}
 
+show_stack:
 	do_show_stack(&info);
 }
 
+void show_stack(struct task_struct *t, unsigned long *sp)
+{
+	return parisc_show_stack(t, sp, NULL);
+}
+
 int is_valid_bugaddr(unsigned long iaoq)
 {
 	return 1;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 5b8d8382b762..4bb2e9310a56 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -49,6 +49,19 @@ config IRQ_PER_CPU
 	bool
 	default y
 
+config STACKTRACE_SUPPORT
+	bool
+	default y
+
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	depends on PPC64
+	default y
+
+config LOCKDEP_SUPPORT
+	bool
+	default y
+
 config RWSEM_GENERIC_SPINLOCK
 	bool
 
@@ -81,6 +94,11 @@ config GENERIC_FIND_NEXT_BIT
 	bool
 	default y
 
+config GENERIC_GPIO
+	bool
+	help
+	  Generic GPIO API support
+
 config ARCH_NO_VIRT_TO_BUS
 	def_bool PPC64
 
@@ -90,6 +108,8 @@ config PPC
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_LMB
 
 config EARLY_PRINTK
 	bool
@@ -209,15 +229,6 @@ source kernel/Kconfig.hz
 source kernel/Kconfig.preempt
 source "fs/Kconfig.binfmt"
 
-# We optimistically allocate largepages from the VM, so make the limit
-# large enough (16MB). This badly named config option is actually
-# max order + 1
-config FORCE_MAX_ZONEORDER
-	int
-	depends on PPC64
-	default "9" if PPC_64K_PAGES
-	default "13"
-
 config HUGETLB_PAGE_SIZE_VARIABLE
 	bool
 	depends on HUGETLB_PAGE
@@ -306,6 +317,16 @@ config CRASH_DUMP
 
 	  Don't change this unless you know what you are doing.
 
+config PHYP_DUMP
+	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
+	depends on PPC_PSERIES && EXPERIMENTAL
+	help
+	  Hypervisor-assisted dump is meant to be a kdump replacement
+	  offering robustness and speed not possible without system
+	  hypervisor assistence.
+
+	  If unsure, say "N"
+
 config PPCBUG_NVRAM
 	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
 	default y if PPC_PREP
@@ -380,6 +401,26 @@ config PPC_64K_PAGES
 	  while on hardware with such support, it will be used to map
 	  normal application pages.
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "9" if PPC_64K_PAGES
+	default "13" if PPC64 && !PPC_64K_PAGES
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  The page size is not necessarily 4KB.  For example, on 64-bit
+	  systems, 64KB pages can be enabled via CONFIG_PPC_64K_PAGES.  Keep
+	  this in mind when choosing a value for this option.
+
 config PPC_SUBPAGE_PROT
 	bool "Support setting protections for 4k subpages"
 	depends on PPC_64K_PAGES
@@ -489,6 +530,14 @@ config FSL_PCI
  	bool
 	select PPC_INDIRECT_PCI
 
+config 4xx_SOC
+	bool
+
+config FSL_LBC
+	bool
+	help
+	  Freescale Localbus support
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
@@ -662,22 +711,6 @@ config CONSISTENT_SIZE
 	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
 	default "0x00200000" if NOT_COHERENT_CACHE
 
-config BOOT_LOAD_BOOL
-	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
-	help
-	  This option allows you to set the initial load address of the zImage
-	  or zImage.initrd file.  This can be useful if you are on a board
-	  which has a small amount of memory.
-
-	  Say N here unless you know what you are doing.
-
-config BOOT_LOAD
-	hex "Link/load address for booting" if BOOT_LOAD_BOOL
-	default "0x00400000" if 40x || 8xx || 8260
-	default "0x01000000" if 44x
-	default "0x00800000"
-
 config PIN_TLB
 	bool "Pinned Kernel TLBs (860 ONLY)"
 	depends on ADVANCED_OPTIONS && 8xx
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index db7cc34c24d4..a86d8d853214 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -269,7 +269,7 @@ config PPC_EARLY_DEBUG_CPM_ADDR
 	hex "CPM UART early debug transmit descriptor address"
 	depends on PPC_EARLY_DEBUG_CPM
 	default "0xfa202008" if PPC_EP88XC
-	default "0xf0000008" if CPM2
+	default "0xf0001ff8" if CPM2
 	default "0xff002008" if CPM1
 	help
 	  This specifies the address of the transmit descriptor
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 1c6ce3536e4c..e2ec4a91ccef 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -71,13 +71,11 @@ endif
 
 LDFLAGS_vmlinux	:= -Bstatic
 
-CPPFLAGS-$(CONFIG_PPC32) := -Iarch/$(ARCH)
-AFLAGS-$(CONFIG_PPC32)	:= -Iarch/$(ARCH)
 CFLAGS-$(CONFIG_PPC64)	:= -mminimal-toc -mtraceback=none  -mcall-aixdesc
-CFLAGS-$(CONFIG_PPC32)	:= -Iarch/$(ARCH) -ffixed-r2 -mmultiple
-KBUILD_CPPFLAGS	+= $(CPPFLAGS-y)
-KBUILD_AFLAGS	+= $(AFLAGS-y)
-KBUILD_CFLAGS	+= -msoft-float -pipe $(CFLAGS-y)
+CFLAGS-$(CONFIG_PPC32)	:= -ffixed-r2 -mmultiple
+KBUILD_CPPFLAGS	+= -Iarch/$(ARCH)
+KBUILD_AFLAGS	+= -Iarch/$(ARCH)
+KBUILD_CFLAGS	+= -msoft-float -pipe -Iarch/$(ARCH) $(CFLAGS-y)
 CPP		= $(CC) -E $(KBUILD_CFLAGS)
 
 CHECKFLAGS	+= -m$(CONFIG_WORD_SIZE) -D__powerpc__ -D__powerpc$(CONFIG_WORD_SIZE)__
@@ -155,7 +153,7 @@ all: zImage
 
 CPPFLAGS_vmlinux.lds	:= -Upowerpc
 
-BOOT_TARGETS = zImage zImage.initrd uImage treeImage.% cuImage.%
+BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.%
 
 PHONY += $(BOOT_TARGETS)
 
@@ -164,7 +162,7 @@ boot := arch/$(ARCH)/boot
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
-bootwrapper_install:
+bootwrapper_install %.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index e3993a607584..5ba50c673390 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -40,6 +40,7 @@ $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
+$(obj)/virtex405-head.o: BOOTCFLAGS += -mcpu=405
 
 
 zlib       := inffast.c inflate.c inftrees.c
@@ -64,7 +65,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
 		fixed-head.S ep88xc.c ep405.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
-		cuboot-warp.c cuboot-85xx-cpm2.c
+		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
+		virtex405-head.S
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -186,13 +188,13 @@ quiet_cmd_wrap	= WRAP    $@
 image-$(CONFIG_PPC_PSERIES)		+= zImage.pseries
 image-$(CONFIG_PPC_MAPLE)		+= zImage.pseries
 image-$(CONFIG_PPC_IBM_CELL_BLADE)	+= zImage.pseries
-image-$(CONFIG_PPC_PS3)			+= zImage-dtb.ps3
+image-$(CONFIG_PPC_PS3)			+= dtbImage.ps3
 image-$(CONFIG_PPC_CELLEB)		+= zImage.pseries
 image-$(CONFIG_PPC_CHRP)		+= zImage.chrp
 image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
 image-$(CONFIG_PPC_HOLLY)		+= zImage.holly
-image-$(CONFIG_PPC_PRPMC2800)		+= zImage.prpmc2800
+image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
 image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 
@@ -205,7 +207,7 @@ image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 #
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
-image-$(CONFIG_EP405)			+= zImage-dtb.ep405
+image-$(CONFIG_EP405)			+= dtbImage.ep405
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 
 # Board ports in arch/powerpc/platform/44x/Kconfig
@@ -216,13 +218,14 @@ image-$(CONFIG_RAINIER)			+= cuImage.rainier
 image-$(CONFIG_TAISHAN)			+= cuImage.taishan
 image-$(CONFIG_KATMAI)			+= cuImage.katmai
 image-$(CONFIG_WARP)			+= cuImage.warp
+image-$(CONFIG_YOSEMITE)		+= cuImage.yosemite
 
 # Board ports in arch/powerpc/platform/8xx/Kconfig
 image-$(CONFIG_PPC_MPC86XADS)		+= cuImage.mpc866ads
 image-$(CONFIG_PPC_MPC885ADS)		+= cuImage.mpc885ads
-image-$(CONFIG_PPC_EP88XC)		+= zImage-dtb.ep88xc
+image-$(CONFIG_PPC_EP88XC)		+= dtbImage.ep88xc
 image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
-					   zImage-dtb.adder875-redboot
+					   dtbImage.adder875-redboot
 
 # Board ports in arch/powerpc/platform/52xx/Kconfig
 image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
@@ -230,7 +233,7 @@ image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
 # Board ports in arch/powerpc/platform/82xx/Kconfig
 image-$(CONFIG_MPC8272_ADS)		+= cuImage.mpc8272ads
 image-$(CONFIG_PQ2FADS)			+= cuImage.pq2fads
-image-$(CONFIG_EP8248E)			+= zImage-dtb.ep8248e
+image-$(CONFIG_EP8248E)			+= dtbImage.ep8248e
 
 # Board ports in arch/powerpc/platform/83xx/Kconfig
 image-$(CONFIG_MPC832x_MDS)		+= cuImage.mpc832x_mds
@@ -253,8 +256,9 @@ image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
 image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
-image-$(CONFIG_SBC8548)			+= cuImage.tqm8548
-image-$(CONFIG_SBC8560)			+= cuImage.tqm8560
+image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
+image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
+image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
@@ -268,7 +272,8 @@ endif
 
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
-		$(patsubst treeImage%, treeImage.initrd%, $(image-y)))
+		$(patsubst dtbImage%, dtbImage.initrd%, \
+		$(patsubst treeImage%, treeImage.initrd%, $(image-y))))
 initrd-y := $(filter-out $(image-y), $(initrd-y))
 targets	+= $(image-y) $(initrd-y)
 
@@ -283,11 +288,12 @@ $(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
 $(obj)/zImage.%: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,$*)
 
-$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
-	$(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
+$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+	$(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
-	$(call if_changed,wrap,$*,$(dtstree)/$*.dts)
+$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
+	$(call if_changed,wrap,$*,,$(obj)/$*.dtb)
 
 # This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
 # prefix
@@ -300,14 +306,24 @@ $(obj)/zImage.iseries: vmlinux
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)
 
-$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
-	$(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
+$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb)
 
-$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
-	$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
+$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
 
-$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
-	$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
+$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb)
+
+$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
+
+$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
+	$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
+
+# Rule to build device tree blobs
+$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
+	$(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
 
 # If there isn't a platform selected then just strip the vmlinux.
 ifeq (,$(image-y))
@@ -324,7 +340,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 
 # anything not in $(targets)
 clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
-	otheros.bld
+	otheros.bld *.dtb
 
 # clean up files cached by wrapper
 clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c
index 54b33f1500e2..b82cacbc60db 100644
--- a/arch/powerpc/boot/bamboo.c
+++ b/arch/powerpc/boot/bamboo.c
@@ -33,7 +33,8 @@ static void bamboo_fixups(void)
 	ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
-	dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1);
+	dt_fixup_mac_address_by_alias("ethernet0", bamboo_mac0);
+	dt_fixup_mac_address_by_alias("ethernet1", bamboo_mac1);
 }
 
 void bamboo_init(void *mac0, void *mac1)
diff --git a/arch/powerpc/boot/cpm-serial.c b/arch/powerpc/boot/cpm-serial.c
index 28296facb2ae..19dc15abe43d 100644
--- a/arch/powerpc/boot/cpm-serial.c
+++ b/arch/powerpc/boot/cpm-serial.c
@@ -11,6 +11,7 @@
 #include "types.h"
 #include "io.h"
 #include "ops.h"
+#include "page.h"
 
 struct cpm_scc {
 	u32 gsmrl;
@@ -42,6 +43,22 @@ struct cpm_param {
 	u16 tbase;
 	u8 rfcr;
 	u8 tfcr;
+	u16 mrblr;
+	u32 rstate;
+	u8 res1[4];
+	u16 rbptr;
+	u8 res2[6];
+	u32 tstate;
+	u8 res3[4];
+	u16 tbptr;
+	u8 res4[6];
+	u16 maxidl;
+	u16 idlc;
+	u16 brkln;
+	u16 brkec;
+	u16 brkcr;
+	u16 rmask;
+	u8 res5[4];
 };
 
 struct cpm_bd {
@@ -54,10 +71,10 @@ static void *cpcr;
 static struct cpm_param *param;
 static struct cpm_smc *smc;
 static struct cpm_scc *scc;
-struct cpm_bd *tbdf, *rbdf;
+static struct cpm_bd *tbdf, *rbdf;
 static u32 cpm_cmd;
-static u8 *muram_start;
-static u32 muram_offset;
+static void *cbd_addr;
+static u32 cbd_offset;
 
 static void (*do_cmd)(int op);
 static void (*enable_port)(void);
@@ -119,20 +136,25 @@ static int cpm_serial_open(void)
 
 	out_8(&param->rfcr, 0x10);
 	out_8(&param->tfcr, 0x10);
-
-	rbdf = (struct cpm_bd *)muram_start;
-	rbdf->addr = (u8 *)(rbdf + 2);
+	out_be16(&param->mrblr, 1);
+	out_be16(&param->maxidl, 0);
+	out_be16(&param->brkec, 0);
+	out_be16(&param->brkln, 0);
+	out_be16(&param->brkcr, 0);
+
+	rbdf = cbd_addr;
+	rbdf->addr = (u8 *)rbdf - 1;
 	rbdf->sc = 0xa000;
 	rbdf->len = 1;
 
 	tbdf = rbdf + 1;
-	tbdf->addr = (u8 *)(rbdf + 2) + 1;
+	tbdf->addr = (u8 *)rbdf - 2;
 	tbdf->sc = 0x2000;
 	tbdf->len = 1;
 
 	sync();
-	out_be16(&param->rbase, muram_offset);
-	out_be16(&param->tbase, muram_offset + sizeof(struct cpm_bd));
+	out_be16(&param->rbase, cbd_offset);
+	out_be16(&param->tbase, cbd_offset + sizeof(struct cpm_bd));
 
 	do_cmd(CPM_CMD_INIT_RX_TX);
 
@@ -175,10 +197,12 @@ static unsigned char cpm_serial_getc(void)
 
 int cpm_console_init(void *devp, struct serial_console_data *scdp)
 {
-	void *reg_virt[2];
-	int is_smc = 0, is_cpm2 = 0, n;
-	unsigned long reg_phys;
+	void *vreg[2];
+	u32 reg[2];
+	int is_smc = 0, is_cpm2 = 0;
 	void *parent, *muram;
+	void *muram_addr;
+	unsigned long muram_offset, muram_size;
 
 	if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
 		is_smc = 1;
@@ -202,63 +226,64 @@ int cpm_console_init(void *devp, struct serial_console_data *scdp)
 	else
 		do_cmd = cpm1_cmd;
 
-	n = getprop(devp, "fsl,cpm-command", &cpm_cmd, 4);
-	if (n < 4)
+	if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4)
 		return -1;
 
-	n = getprop(devp, "virtual-reg", reg_virt, sizeof(reg_virt));
-	if (n < (int)sizeof(reg_virt)) {
-		for (n = 0; n < 2; n++) {
-			if (!dt_xlate_reg(devp, n, &reg_phys, NULL))
-				return -1;
-
-			reg_virt[n] = (void *)reg_phys;
-		}
-	}
+	if (dt_get_virtual_reg(devp, vreg, 2) < 2)
+		return -1;
 
 	if (is_smc)
-		smc = reg_virt[0];
+		smc = vreg[0];
 	else
-		scc = reg_virt[0];
+		scc = vreg[0];
 
-	param = reg_virt[1];
+	param = vreg[1];
 
 	parent = get_parent(devp);
 	if (!parent)
 		return -1;
 
-	n = getprop(parent, "virtual-reg", reg_virt, sizeof(reg_virt));
-	if (n < (int)sizeof(reg_virt)) {
-		if (!dt_xlate_reg(parent, 0, &reg_phys, NULL))
-			return -1;
-
-		reg_virt[0] = (void *)reg_phys;
-	}
-
-	cpcr = reg_virt[0];
+	if (dt_get_virtual_reg(parent, &cpcr, 1) < 1)
+		return -1;
 
 	muram = finddevice("/soc/cpm/muram/data");
 	if (!muram)
 		return -1;
 
 	/* For bootwrapper-compatible device trees, we assume that the first
-	 * entry has at least 18 bytes, and that #address-cells/#data-cells
+	 * entry has at least 128 bytes, and that #address-cells/#data-cells
 	 * is one for both parent and child.
 	 */
 
-	n = getprop(muram, "virtual-reg", reg_virt, sizeof(reg_virt));
-	if (n < (int)sizeof(reg_virt)) {
-		if (!dt_xlate_reg(muram, 0, &reg_phys, NULL))
-			return -1;
+	if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1)
+		return -1;
 
-		reg_virt[0] = (void *)reg_phys;
-	}
+	if (getprop(muram, "reg", reg, 8) < 8)
+		return -1;
 
-	muram_start = reg_virt[0];
+	muram_offset = reg[0];
+	muram_size = reg[1];
 
-	n = getprop(muram, "reg", &muram_offset, 4);
-	if (n < 4)
-		return -1;
+	/* Store the buffer descriptors at the end of the first muram chunk.
+	 * For SMC ports on CPM2-based platforms, relocate the parameter RAM
+	 * just before the buffer descriptors.
+	 */
+
+	cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd);
+
+	if (is_cpm2 && is_smc) {
+		u16 *smc_base = (u16 *)param;
+		u16 pram_offset;
+
+		pram_offset = cbd_offset - 64;
+		pram_offset = _ALIGN_DOWN(pram_offset, 64);
+
+		disable_port();
+		out_be16(smc_base, pram_offset);
+		param = muram_addr - muram_offset + pram_offset;
+	}
+
+	cbd_addr = muram_addr - muram_offset + cbd_offset;
 
 	scdp->open = cpm_serial_open;
 	scdp->putc = cpm_serial_putc;
diff --git a/arch/powerpc/boot/cuboot-bamboo.c b/arch/powerpc/boot/cuboot-bamboo.c
index 900c7ff2b7e9..b5c30f766c40 100644
--- a/arch/powerpc/boot/cuboot-bamboo.c
+++ b/arch/powerpc/boot/cuboot-bamboo.c
@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/cuboot-ebony.c b/arch/powerpc/boot/cuboot-ebony.c
index c5f37ce172ea..56564ba37f62 100644
--- a/arch/powerpc/boot/cuboot-ebony.c
+++ b/arch/powerpc/boot/cuboot-ebony.c
@@ -17,6 +17,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c
index c021167f9381..5434d70b5660 100644
--- a/arch/powerpc/boot/cuboot-katmai.c
+++ b/arch/powerpc/boot/cuboot-katmai.c
@@ -22,6 +22,7 @@
 #include "44x.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
diff --git a/arch/powerpc/boot/cuboot-pq2.c b/arch/powerpc/boot/cuboot-pq2.c
index f56ac6cae9f3..9c7d13428293 100644
--- a/arch/powerpc/boot/cuboot-pq2.c
+++ b/arch/powerpc/boot/cuboot-pq2.c
@@ -128,7 +128,7 @@ static void fixup_pci(void)
 	u8 *soc_regs;
 	int i, len;
 	void *node, *parent_node;
-	u32 naddr, nsize, mem_log2;
+	u32 naddr, nsize, mem_pow2, mem_mask;
 
 	node = finddevice("/pci");
 	if (!node || !dt_is_compatible(node, "fsl,pq2-pci"))
@@ -141,7 +141,7 @@ static void fixup_pci(void)
 
 	soc_regs = (u8 *)fsl_get_immr();
 	if (!soc_regs)
-		goto err;
+		goto unhandled;
 
 	dt_get_reg_format(node, &naddr, &nsize);
 	if (naddr != 3 || nsize != 2)
@@ -153,7 +153,7 @@ static void fixup_pci(void)
 
 	dt_get_reg_format(parent_node, &naddr, &nsize);
 	if (naddr != 1 || nsize != 1)
-		goto err;
+		goto unhandled;
 
 	len = getprop(node, "ranges", pci_ranges_buf,
 	              sizeof(pci_ranges_buf));
@@ -170,14 +170,20 @@ static void fixup_pci(void)
 	}
 
 	if (!mem || !mmio || !io)
-		goto err;
+		goto unhandled;
+	if (mem->size[1] != mmio->size[1])
+		goto unhandled;
+	if (mem->size[1] & (mem->size[1] - 1))
+		goto unhandled;
+	if (io->size[1] & (io->size[1] - 1))
+		goto unhandled;
 
 	if (mem->phys_addr + mem->size[1] == mmio->phys_addr)
 		mem_base = mem;
 	else if (mmio->phys_addr + mmio->size[1] == mem->phys_addr)
 		mem_base = mmio;
 	else
-		goto err;
+		goto unhandled;
 
 	out_be32(&pci_regs[1][0], mem_base->phys_addr | 1);
 	out_be32(&pci_regs[2][0], ~(mem->size[1] + mmio->size[1] - 1));
@@ -201,8 +207,9 @@ static void fixup_pci(void)
 	out_le32(&pci_regs[0][58], 0);
 	out_le32(&pci_regs[0][60], 0);
 
-	mem_log2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
-	out_le32(&pci_regs[0][62], 0xa0000000 | ~((1 << (mem_log2 - 12)) - 1));
+	mem_pow2 = 1 << (__ilog2_u32(bd.bi_memsize - 1) + 1);
+	mem_mask = ~(mem_pow2 - 1) >> 12;
+	out_le32(&pci_regs[0][62], 0xa0000000 | mem_mask);
 
 	/* If PCI is disabled, drive RST high to enable. */
 	if (!(in_le32(&pci_regs[0][32]) & 1)) {
@@ -228,7 +235,11 @@ static void fixup_pci(void)
 	return;
 
 err:
-	printf("Bad PCI node\r\n");
+	printf("Bad PCI node -- using existing firmware setup.\r\n");
+	return;
+
+unhandled:
+	printf("Unsupported PCI node -- using existing firmware setup.\r\n");
 }
 
 static void pq2_platform_fixups(void)
diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c
index cf452b66dce8..0a3fddee54df 100644
--- a/arch/powerpc/boot/cuboot-rainier.c
+++ b/arch/powerpc/boot/cuboot-rainier.c
@@ -42,7 +42,8 @@ static void rainier_fixups(void)
 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ibm4xx_denali_fixup_memsize();
-	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 }
 
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c
index f555575a44de..caf8f2e842ea 100644
--- a/arch/powerpc/boot/cuboot-sequoia.c
+++ b/arch/powerpc/boot/cuboot-sequoia.c
@@ -42,7 +42,8 @@ static void sequoia_fixups(void)
 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ibm4xx_denali_fixup_memsize();
-	dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 }
 
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c
index f66455a45ab1..9bc906a754dd 100644
--- a/arch/powerpc/boot/cuboot-taishan.c
+++ b/arch/powerpc/boot/cuboot-taishan.c
@@ -21,7 +21,9 @@
 #include "dcr.h"
 #include "4xx.h"
 
+#define TARGET_4xx
 #define TARGET_44x
+#define TARGET_440GX
 #include "ppcboot.h"
 
 static bd_t bd;
@@ -38,7 +40,8 @@ static void taishan_fixups(void)
 
 	ibm4xx_sdram_fixup_memsize();
 
-	dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
 
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 }
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index bdedebe1bc14..eb108a877492 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -11,6 +11,7 @@
 #include "4xx.h"
 #include "cuboot.h"
 
+#define TARGET_4xx
 #define TARGET_44x
 #include "ppcboot.h"
 
@@ -23,7 +24,7 @@ static void warp_fixups(void)
 	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
-	dt_fixup_mac_addresses(&bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
 }
 
 
diff --git a/arch/powerpc/boot/cuboot-yosemite.c b/arch/powerpc/boot/cuboot-yosemite.c
new file mode 100644
index 000000000000..cc6e338c5d0d
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-yosemite.c
@@ -0,0 +1,44 @@
+/*
+ * Old U-boot compatibility for Yosemite
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2008 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void yosemite_fixups(void)
+{
+	unsigned long sysclk = 66666666;
+
+	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+	ibm4xx_sdram_fixup_memsize();
+	ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = yosemite_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
index 60f561e307a9..5d12336dc360 100644
--- a/arch/powerpc/boot/devtree.c
+++ b/arch/powerpc/boot/devtree.c
@@ -350,3 +350,23 @@ int dt_is_compatible(void *node, const char *compat)
 
 	return 0;
 }
+
+int dt_get_virtual_reg(void *node, void **addr, int nres)
+{
+	unsigned long xaddr;
+	int n;
+
+	n = getprop(node, "virtual-reg", addr, nres * 4);
+	if (n > 0)
+		return n / 4;
+
+	for (n = 0; n < nres; n++) {
+		if (!dt_xlate_reg(node, n, &xaddr, NULL))
+			break;
+
+		addr[n] = (void *)xaddr;
+	}
+
+	return n;
+}
+
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index 7dc37c9a7446..ba2521bdaab1 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -204,7 +204,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
@@ -225,7 +224,6 @@
 			};
 
 			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
new file mode 100644
index 000000000000..6f3d38a1554f
--- /dev/null
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -0,0 +1,402 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,canyonlands";
+	compatible = "amcc,canyonlands";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460EX";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0e0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <a 4 b 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460ex","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0f0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <10 4 11 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460ex";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460ex";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460ex", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+			dcr-reg = <180 62>;
+			num-tx-chans = <2>;
+			num-rx-chans = <10>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 6 4
+					/*RXEOB*/ 7 4
+					/*SERR*/  3 4
+					/*TXDE*/  4 4
+					/*RXDE*/  5 4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460ex", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <b0000000 4 b0000000 50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460ex", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				interrupts = <6 4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600300 8>;
+				virtual-reg = <ef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1 4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600400 8>;
+				virtual-reg = <ef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600500 8>;
+				virtual-reg = <ef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1d 4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600600 8>;
+				virtual-reg = <ef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1e 4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460ex", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <3 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460ex", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+				reg = <ef601500 8>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <ef601350 30>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460ex", "ibm,tah";
+				reg = <ef601450 30>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 10 4
+						 /*Wake*/   1 &UIC2 14 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460ex", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 11 4
+						 /*Wake*/   1 &UIC2 15 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <c 0ec00000   8	/* Config space access */
+			       0 0 0		/* no IACK cycles */
+			       c 0ed00000   4   /* Special cycles */
+			       c 0ec80000 100	/* Internal registers */
+			       c 0ec80100  fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0 3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0000 0 0 0>;
+			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0>; /* port number */
+			reg = <d 00000000 20000000	/* Config space access */
+			       c 08010000 00001000>;	/* Registers */
+			dcr-reg = <100 020>;
+			sdr-base = <300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <40 7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <1>; /* port number */
+			reg = <d 20000000 20000000	/* Config space access */
+			       c 08011000 00001000>;	/* Registers */
+			dcr-reg = <120 020>;
+			sdr-base = <340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <80 bf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts
index 30737eafe68e..c6ca6319e4f7 100644
--- a/arch/powerpc/boot/dts/cm5200.dts
+++ b/arch/powerpc/boot/dts/cm5200.dts
@@ -212,13 +212,30 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
@@ -231,4 +248,22 @@
 			reg = <8000 4000>;
 		};
 	};
+
+	lpb {
+		model = "fsl,lpb";
+		compatible = "fsl,lpb";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 fc000000 2000000>;
+
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 2000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
 };
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 0b000cb7ed8b..5079dc890e0e 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -241,7 +241,6 @@
 			};
 
 			EMAC0: ethernet@40000800 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
@@ -261,7 +260,6 @@
 				zmii-channel = <0>;
 			};
 			EMAC1: ethernet@40000900 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts
index 5d2fb76a72c1..756758fb5b7b 100644
--- a/arch/powerpc/boot/dts/ep8248e.dts
+++ b/arch/powerpc/boot/dts/ep8248e.dts
@@ -121,8 +121,7 @@
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 0x1100 0x1140
-					       0xec0 0x9800 0x800>;
+					reg = <0 0x2000 0x9800 0x800>;
 				};
 			};
 
@@ -138,7 +137,7 @@
 				device_type = "serial";
 				compatible = "fsl,mpc8248-smc-uart",
 				             "fsl,cpm2-smc-uart";
-				reg = <0x11a80 0x20 0x1100 0x40>;
+				reg = <0x11a80 0x20 0x87fc 2>;
 				interrupts = <4 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <7>;
diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts
index 02705f299790..ae57d6240120 100644
--- a/arch/powerpc/boot/dts/ep88xc.dts
+++ b/arch/powerpc/boot/dts/ep88xc.dts
@@ -2,7 +2,7 @@
  * EP88xC Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "EP88xC";
@@ -23,44 +24,44 @@
 
 		PowerPC,885@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#16>;
-			i-cache-line-size = <d#16>;
-			d-cache-size = <d#8192>;
-			i-cache-size = <d#8192>;
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
-			interrupts = <f 2>;	// decrementer interrupt
+			interrupts = <15 2>;	// decrementer interrupt
 			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@fa200100 {
 		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <fa200100 40>;
+		reg = <0xfa200100 0x40>;
 
 		ranges = <
-			0 0 fc000000 04000000
-			3 0 fa000000 01000000
+			0x0 0x0 0xfc000000 0x4000000
+			0x3 0x0 0xfa000000 0x1000000
 		>;
 
 		flash@0,2000000 {
 			compatible = "cfi-flash";
-			reg = <0 2000000 2000000>;
+			reg = <0x0 0x2000000 0x2000000>;
 			bank-width = <4>;
 			device-width = <2>;
 		};
 
 		board-control@3,400000 {
-			reg = <3 400000 10>;
+			reg = <0x3 0x400000 0x10>;
 			compatible = "fsl,ep88xc-bcsr";
 		};
 	};
@@ -70,25 +71,25 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 fa200000 00004000>;
+		ranges = <0x0 0xfa200000 0x4000>;
 		bus-frequency = <0>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <fa200000 4000>;
+		reg = <0xfa200000 0x4000>;
 
 		mdio@e00 {
 			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY0: ethernet-phy@0 {
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY1: ethernet-phy@1 {
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -97,7 +98,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
 			interrupt-parent = <&PIC>;
@@ -109,7 +110,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <1e00 188>;
+			reg = <0x1e00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <7 1>;
 			interrupt-parent = <&PIC>;
@@ -120,7 +121,7 @@
 		PIC: interrupt-controller@0 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0 24>;
+			reg = <0x0 0x24>;
 			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 		};
 
@@ -130,29 +131,29 @@
 			#size-cells = <2>;
 			compatible = "fsl,pq-pcmcia";
 			device_type = "pcmcia";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			interrupt-parent = <&PIC>;
-			interrupts = <d 1>;
+			interrupts = <13 1>;
 		};
 
 		cpm@9c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
-			command-proc = <9c0>;
+			command-proc = <0x9c0>;
 			interrupts = <0>;	// cpm error interrupt
 			interrupt-parent = <&CPM_PIC>;
-			reg = <9c0 40>;
+			reg = <0x9c0 0x40>;
 			ranges;
 
 			muram@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 2000 2000>;
+				ranges = <0x0 0x2000 0x2000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 1c00>;
+					reg = <0x0 0x1c00>;
 				};
 			};
 
@@ -160,7 +161,7 @@
 				compatible = "fsl,mpc885-brg",
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
-				reg = <9f0 10>;
+				reg = <0x9f0 0x10>;
 			};
 
 			CPM_PIC: interrupt-controller@930 {
@@ -168,7 +169,7 @@
 				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
 				interrupt-parent = <&PIC>;
-				reg = <930 20>;
+				reg = <0x930 0x20>;
 				compatible = "fsl,mpc885-cpm-pic",
 				             "fsl,cpm1-pic";
 			};
@@ -178,11 +179,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc885-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a80 10 3e80 40>;
+				reg = <0xa80 0x10 0x3e80 0x40>;
 				interrupts = <4>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0090>;
+				fsl,cpm-command = <0x90>;
 				linux,planetcore-label = "SMC1";
 			};
 
@@ -191,11 +192,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc885-scc-uart",
 				             "fsl,cpm1-scc-uart";
-				reg = <a20 20 3d00 80>;
-				interrupts = <1d>;
+				reg = <0xa20 0x20 0x3d00 0x80>;
+				interrupts = <29>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0040>;
+				fsl,cpm-command = <0x40>;
 				linux,planetcore-label = "SCC2";
 			};
 
@@ -204,9 +205,9 @@
 				#size-cells = <0>;
 				compatible = "fsl,mpc885-usb",
 				             "fsl,cpm1-usb";
-				reg = <a00 18 1c00 80>;
+				reg = <0xa00 0x18 0x1c00 0x80>;
 				interrupt-parent = <&CPM_PIC>;
-				interrupts = <1e>;
+				interrupts = <30>;
 				fsl,cpm-command = <0000>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
new file mode 100644
index 000000000000..958a5ca53d35
--- /dev/null
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -0,0 +1,467 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,glacier";
+	compatible = "amcc,glacier", "amcc,canyonlands";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		ethernet2 = &EMAC2;
+		ethernet3 = &EMAC3;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,460GT";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+			timebase-frequency = <0>; /* Filled in by U-Boot */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by U-Boot */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC2: interrupt-controller2 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <2>;
+		dcr-reg = <0e0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <a 4 b 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	UIC3: interrupt-controller3 {
+		compatible = "ibm,uic-460gt","ibm,uic";
+		interrupt-controller;
+		cell-index = <3>;
+		dcr-reg = <0f0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <10 4 11 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-460gt";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-460gt";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-460gt", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by U-Boot */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+			dcr-reg = <180 62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <20>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-parent = <&UIC2>;
+			interrupts = <	/*TXEOB*/ 6 4
+					/*RXEOB*/ 7 4
+					/*SERR*/  3 4
+					/*TXDE*/  4 4
+					/*RXDE*/  5 4>;
+			desc-base-addr-high = <8>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-460gt", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <b0000000 4 b0000000 50000000>;
+			clock-frequency = <0>; /* Filled in by U-Boot */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-460gt", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				interrupts = <6 4>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600300 8>;
+				virtual-reg = <ef600300>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1 4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600400 8>;
+				virtual-reg = <ef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600500 8>;
+				virtual-reg = <ef600500>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1d 4>;
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600600 8>;
+				virtual-reg = <ef600600>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC1>;
+				interrupts = <1e 4>;
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-460gt", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <3 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-460gt", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			RGMII0: emac-rgmii@ef601500 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <ef601500 8>;
+				has-mdio;
+			};
+
+			RGMII1: emac-rgmii@ef601600 {
+				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+				reg = <ef601600 8>;
+				has-mdio;
+			};
+
+			TAH0: emac-tah@ef601350 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <ef601350 30>;
+			};
+
+			TAH1: emac-tah@ef601450 {
+				compatible = "ibm,tah-460gt", "ibm,tah";
+				reg = <ef601450 30>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC0>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 10 4
+						 /*Wake*/   1 &UIC2 14 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <0>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC1>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 11 4
+						 /*Wake*/   1 &UIC2 15 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <1>;
+				mal-rx-channel = <8>;
+				cell-index = <1>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII0>;
+				rgmii-channel = <1>;
+				tah-device = <&TAH1>;
+				tah-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC2: ethernet@ef601100 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC2>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 12 4
+						 /*Wake*/   1 &UIC2 16 4>;
+				reg = <ef601100 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <10>;
+				cell-index = <2>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <0>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+
+			EMAC3: ethernet@ef601200 {
+				device_type = "network";
+				compatible = "ibm,emac-460gt", "ibm,emac4";
+				interrupt-parent = <&EMAC3>;
+				interrupts = <0 1>;
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = </*Status*/ 0 &UIC2 13 4
+						 /*Wake*/   1 &UIC2 17 4>;
+				reg = <ef601200 70>;
+				local-mac-address = [000000000000]; /* Filled in by U-Boot */
+				mal-device = <&MAL0>;
+				mal-tx-channel = <3>;
+				mal-rx-channel = <18>;
+				cell-index = <3>;
+				max-frame-size = <2328>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rgmii";
+				phy-map = <00000000>;
+				rgmii-device = <&RGMII1>;
+				rgmii-channel = <1>;
+				has-inverted-stacr-oc;
+				has-new-stacr-staopc;
+				mdio-device = <&EMAC0>;
+			};
+		};
+
+		PCIX0: pci@c0ec00000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+			primary;
+			large-inbound-windows;
+			enable-msi-hole;
+			reg = <c 0ec00000   8	/* Config space access */
+			       0 0 0		/* no IACK cycles */
+			       c 0ed00000   4   /* Special cycles */
+			       c 0ec80000 100	/* Internal registers */
+			       c 0ec80100  fc>;	/* Internal messaging registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
+				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 0 to 0x3f */
+			bus-range = <0 3f>;
+
+			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+			interrupt-map-mask = <0000 0 0 0>;
+			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+		};
+
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <0>; /* port number */
+			reg = <d 00000000 20000000	/* Config space access */
+			       c 08010000 00001000>;	/* Registers */
+			dcr-reg = <100 020>;
+			sdr-base = <300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
+				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <40 7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+		};
+
+		PCIE1: pciex@d20000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+			primary;
+			port = <1>; /* port number */
+			reg = <d 20000000 20000000	/* Config space access */
+			       c 08011000 00001000>;	/* Registers */
+			dcr-reg = <120 020>;
+			sdr-base = <340>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
+				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* This drives busses 80 to 0xbf */
+			bus-range = <80 bf>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map = <
+				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
+				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
+				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
+				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index 5dd3d15f0feb..b5d95ac24dbf 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -12,7 +12,7 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,haleakala";
-	compatible = "amcc,kilauea";
+	compatible = "amcc,haleakala", "amcc,kilauea";
 	dcr-parent = <&/cpus/cpu@0>;
 
 	aliases {
@@ -218,7 +218,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -235,7 +235,7 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			compatible = "ibm,plb-pciex-405exr", "ibm,plb-pciex";
+			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
 			port = <0>; /* port number */
 			reg = <a0000000 20000000	/* Config space access */
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index bc32ac7250ec..cc2873a531d2 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -38,8 +38,8 @@
 			timebase-frequency = <0>; /* Filled in by zImage */
 			i-cache-line-size = <20>;
 			d-cache-line-size = <20>;
-			i-cache-size = <20000>;
-			d-cache-size = <20000>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -136,11 +136,11 @@
 		};
 
 		POB0: opb {
-		  	compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
+			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 4 e0000000 20000000>;
-		  	clock-frequency = <0>; /* Filled in by zImage */
+			ranges = <00000000 4 e0000000 20000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
@@ -153,38 +153,38 @@
 			};
 
 			UART0: serial@10000200 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <10000200 8>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <10000200 8>;
 				virtual-reg = <a0000200>;
-		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
-	   		};
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <1c200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0 4>;
+			};
 
 			UART1: serial@10000300 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <10000300 8>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <10000300 8>;
 				virtual-reg = <a0000300>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
-	   		};
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
 
 
 			UART2: serial@10000600 {
-		   		device_type = "serial";
-		   		compatible = "ns16550";
-		   		reg = <10000600 8>;
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <10000600 8>;
 				virtual-reg = <a0000600>;
-		   		clock-frequency = <0>;
-		   		current-speed = <0>;
-		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <5 4>;
-	   		};
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC1>;
+				interrupts = <5 4>;
+			};
 
 			IIC0: i2c@10000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
@@ -212,7 +212,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "gmii";
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 8baef61f31cd..48c9a6e71f1a 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -219,7 +219,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -247,7 +247,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
new file mode 100644
index 000000000000..f869ce3ca0b7
--- /dev/null
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -0,0 +1,267 @@
+/*
+ * Device Tree Source for Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc8560ads.dts
+ *
+ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	model = "KSI8560";
+	compatible = "emerson,KSI8560";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8560@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;		/* L1, 32K */
+			i-cache-size = <0x8000>;		/* L1, 32K */
+			timebase-frequency = <0>;		/* From U-boot */
+			bus-frequency = <0>;			/* From U-boot */
+			clock-frequency = <0>;			/* From U-boot */
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;			/* Fixed by bootwrapper */
+	};
+
+	soc@fdf00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x00000000 0xfdf00000 0x00100000>;
+		bus-frequency = <0>;				/* Fixed by bootwrapper */
+
+		memory-controller@2000 {
+			compatible = "fsl,8540-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x12 0x2>;
+		};
+
+		l2-cache-controller@20000 {
+			compatible = "fsl,8540-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <0x20>;		/* 32 bytes */
+			cache-size = <0x40000>;			/* L2, 256K */
+			interrupt-parent = <&MPIC>;
+			interrupts = <0x10 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <0x2b 0x2>;
+			interrupt-parent = <&MPIC>;
+			dfsrr;
+		};
+
+		mdio@24520 {					/* For TSECs */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			PHY1: ethernet-phy@1 {
+				interrupt-parent = <&MPIC>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+
+			PHY2: ethernet-phy@2 {
+				interrupt-parent = <&MPIC>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+			interrupt-parent = <&MPIC>;
+			phy-handle = <&PHY1>;
+		};
+
+		enet1: ethernet@25000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			/* Mac address filled in by bootwrapper */
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
+			interrupt-parent = <&MPIC>;
+			phy-handle = <&PHY2>;
+		};
+
+		MPIC: pic@40000 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x40000 0x40000>;
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x4000 0x9000 0x2000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8560-brg",
+					     "fsl,cpm2-brg",
+					     "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;	/* 166MHz */
+			};
+
+			CPMPIC: pic@90c00 {
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupts = <0x2e 0x2>;
+				interrupt-parent = <&MPIC>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
+			};
+
+			serial@91a00 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a00 0x20 0x88000 0x100>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x28 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			serial@91a20 {
+				device_type = "serial";
+				compatible = "fsl,mpc8560-scc-uart",
+					     "fsl,cpm2-scc-uart";
+				reg = <0x91a20 0x20 0x88100 0x100>;
+				fsl,cpm-brg = <2>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <0x1c200>;
+				interrupts = <0x29 0x8>;
+				interrupt-parent = <&CPMPIC>;
+			};
+
+			mdio@90d00 {				/* For FCCs */
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,cpm2-mdio-bitbang";
+				reg = <0x90d00 0x14>;
+				fsl,mdio-pin = <24>;
+				fsl,mdc-pin = <25>;
+
+				PHY0: ethernet-phy@0 {
+					interrupt-parent = <&MPIC>;
+					reg = <0x0>;
+					device_type = "ethernet-phy";
+				};
+			};
+
+			enet2: ethernet@91300 {
+				device_type = "network";
+				compatible = "fsl,mpc8560-fcc-enet",
+					     "fsl,cpm2-fcc-enet";
+				reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>;
+				/* Mac address filled in by bootwrapper */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+				fsl,cpm-command = <0x12000300>;
+				interrupts = <0x20 0x8>;
+				interrupt-parent = <&CPMPIC>;
+				phy-handle = <&PHY0>;
+			};
+		};
+	};
+
+	localbus@fdf05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8560-localbus";
+		reg = <0xfdf05000 0x68>;
+
+		ranges = <0x0 0x0 0xe0000000 0x00800000
+			  0x4 0x0 0xe8080000 0x00080000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "jedec-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <0x2>;
+
+			partition@0 {
+				label = "Primary Kernel";
+				reg = <0x0 0x180000>;
+			};
+			partition@180000 {
+				label = "Primary Filesystem";
+				reg = <0x180000 0x580000>;
+			};
+			partition@700000 {
+				label = "Monitor";
+				reg = <0x300000 0x100000>;
+				read-only;
+			};
+		};
+
+		cpld@4,0 {
+			compatible = "emerson,KSI8560-cpld";
+			reg = <0x4 0x0 0x80000>;
+		};
+	};
+
+
+	chosen {
+		linux,stdout-path = "/soc/cpm/serial@91a00";
+	};
+};
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 446958854519..2e5a1a1812b6 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -7,6 +7,7 @@
  * Based on sandpoint.dts
  *
  * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
  *
  * This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
 
  */
 
+/dts-v1/;
+
 / {
 	model = "KuroboxHD";
 	compatible = "linkstation";
@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
 
 		PowerPC,603e { /* Really 8241 */
 			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <bebc200>;	/* Fixed by bootloader */
-			timebase-frequency = <1743000>; /* Fixed by bootloader */
+			reg = <0x0>;
+			clock-frequency = <200000000>;	/* Fixed by bootloader */
+			timebase-frequency = <24391680>; /* Fixed by bootloader */
 			bus-frequency = <0>;		/* Fixed by bootloader */
 			/* Following required by dtc but not used */
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 04000000>;
+		reg = <0x0 0x4000000>;
 	};
 
 	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
 		device_type = "soc";
 		compatible = "mpc10x";
 		store-gathering = <0>; /* 0 == off, !0 == on */
-		reg = <80000000 00100000>;
-		ranges = <80000000 80000000 70000000	/* pci mem space */
-			  fc000000 fc000000 00100000	/* EUMB */
-			  fe000000 fe000000 00c00000	/* pci i/o space */
-			  fec00000 fec00000 00300000	/* pci cfg regs */
-			  fef00000 fef00000 00100000>;	/* pci iack */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
 
 		i2c@80003000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <80003000 1000>;
+			reg = <0x80003000 0x1000>;
 			interrupts = <5 2>;
 			interrupt-parent = <&mpic>;
 
 			rtc@32 {
 				device_type = "rtc";
 				compatible = "ricoh,rs5c372a";
-				reg = <32>;
+				reg = <0x32>;
 			};
 		};
 
@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004500 8>;
-			clock-frequency = <5d08d88>;
-			current-speed = <2580>;
+			reg = <0x80004500 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <9600>;
 			interrupts = <9 0>;
 			interrupt-parent = <&mpic>;
 		};
@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004600 8>;
-			clock-frequency = <5d08d88>;
-			current-speed = <e100>;
-			interrupts = <a 0>;
+			reg = <0x80004600 0x8>;
+			clock-frequency = <97553800>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
-			reg = <80040000 40000>;
+			reg = <0x80040000 0x40000>;
 		};
 
 		pci0: pci@fec00000 {
@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			compatible = "mpc10x-pci";
-			reg = <fec00000 400000>;
-			ranges = <01000000 0        0 fe000000 0 00c00000
-				  02000000 0 80000000 80000000 0 70000000>;
-			bus-range = <0 ff>;
-			clock-frequency = <7f28155>;
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
 			interrupt-parent = <&mpic>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 11 - IRQ0 ETH */
-				5800 0 0 1 &mpic 0 1
-				5800 0 0 2 &mpic 1 1
-				5800 0 0 3 &mpic 2 1
-				5800 0 0 4 &mpic 3 1
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
 				/* IDSEL 12 - IRQ1 IDE0 */
-				6000 0 0 1 &mpic 1 1
-				6000 0 0 2 &mpic 2 1
-				6000 0 0 3 &mpic 3 1
-				6000 0 0 4 &mpic 0 1
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
 				/* IDSEL 14 - IRQ3 USB2.0 */
-				7000 0 0 1 &mpic 3 1
-				7000 0 0 2 &mpic 3 1
-				7000 0 0 3 &mpic 3 1
-				7000 0 0 4 &mpic 3 1
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index 8443c85b7b30..e4916e69ad31 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -7,6 +7,7 @@
  * Based on sandpoint.dts
  *
  * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ * Copyright 2008 Freescale Semiconductor, Inc.
  *
  * This file is licensed under
  * the terms of the GNU General Public License version 2.  This program
@@ -17,6 +18,8 @@ XXXX add flash parts, rtc, ??
 
  */
 
+/dts-v1/;
+
 / {
 	model = "KuroboxHG";
 	compatible = "linkstation";
@@ -35,19 +38,19 @@ XXXX add flash parts, rtc, ??
 
 		PowerPC,603e { /* Really 8241 */
 			device_type = "cpu";
-			reg = <0>;
-			clock-frequency = <fdad680>;	/* Fixed by bootloader */
-			timebase-frequency = <1F04000>; /* Fixed by bootloader */
+			reg = <0x0>;
+			clock-frequency = <266000000>;	/* Fixed by bootloader */
+			timebase-frequency = <32522240>; /* Fixed by bootloader */
 			bus-frequency = <0>;		/* Fixed by bootloader */
 			/* Following required by dtc but not used */
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;
+		reg = <0x0 0x8000000>;
 	};
 
 	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
@@ -56,26 +59,26 @@ XXXX add flash parts, rtc, ??
 		device_type = "soc";
 		compatible = "mpc10x";
 		store-gathering = <0>; /* 0 == off, !0 == on */
-		reg = <80000000 00100000>;
-		ranges = <80000000 80000000 70000000	/* pci mem space */
-			  fc000000 fc000000 00100000	/* EUMB */
-			  fe000000 fe000000 00c00000	/* pci i/o space */
-			  fec00000 fec00000 00300000	/* pci cfg regs */
-			  fef00000 fef00000 00100000>;	/* pci iack */
+		reg = <0x80000000 0x100000>;
+		ranges = <0x80000000 0x80000000 0x70000000	/* pci mem space */
+			  0xfc000000 0xfc000000 0x100000	/* EUMB */
+			  0xfe000000 0xfe000000 0xc00000	/* pci i/o space */
+			  0xfec00000 0xfec00000 0x300000	/* pci cfg regs */
+			  0xfef00000 0xfef00000 0x100000>;	/* pci iack */
 
 		i2c@80003000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <80003000 1000>;
+			reg = <0x80003000 0x1000>;
 			interrupts = <5 2>;
 			interrupt-parent = <&mpic>;
 
 			rtc@32 {
 				device_type = "rtc";
 				compatible = "ricoh,rs5c372a";
-				reg = <32>;
+				reg = <0x32>;
 			};
 		};
 
@@ -83,9 +86,9 @@ XXXX add flash parts, rtc, ??
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004500 8>;
-			clock-frequency = <7c044a8>;
-			current-speed = <2580>;
+			reg = <0x80004500 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <9600>;
 			interrupts = <9 0>;
 			interrupt-parent = <&mpic>;
 		};
@@ -94,10 +97,10 @@ XXXX add flash parts, rtc, ??
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <80004600 8>;
-			clock-frequency = <7c044a8>;
-			current-speed = <e100>;
-			interrupts = <a 0>;
+			reg = <0x80004600 0x8>;
+			clock-frequency = <130041000>;
+			current-speed = <57600>;
+			interrupts = <10 0>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -107,7 +110,7 @@ XXXX add flash parts, rtc, ??
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
-			reg = <80040000 40000>;
+			reg = <0x80040000 0x40000>;
 		};
 
 		pci0: pci@fec00000 {
@@ -116,29 +119,29 @@ XXXX add flash parts, rtc, ??
 			#interrupt-cells = <1>;
 			device_type = "pci";
 			compatible = "mpc10x-pci";
-			reg = <fec00000 400000>;
-			ranges = <01000000 0        0 fe000000 0 00c00000
-				  02000000 0 80000000 80000000 0 70000000>;
-			bus-range = <0 ff>;
-			clock-frequency = <7f28155>;
+			reg = <0xfec00000 0x400000>;
+			ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0xc00000
+				  0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>;
+			bus-range = <0 255>;
+			clock-frequency = <133333333>;
 			interrupt-parent = <&mpic>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 11 - IRQ0 ETH */
-				5800 0 0 1 &mpic 0 1
-				5800 0 0 2 &mpic 1 1
-				5800 0 0 3 &mpic 2 1
-				5800 0 0 4 &mpic 3 1
+				0x5800 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x5800 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x5800 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x5800 0x0 0x0 0x4 &mpic 0x3 0x1
 				/* IDSEL 12 - IRQ1 IDE0 */
-				6000 0 0 1 &mpic 1 1
-				6000 0 0 2 &mpic 2 1
-				6000 0 0 3 &mpic 3 1
-				6000 0 0 4 &mpic 0 1
+				0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x6000 0x0 0x0 0x4 &mpic 0x0 0x1
 				/* IDSEL 14 - IRQ3 USB2.0 */
-				7000 0 0 1 &mpic 3 1
-				7000 0 0 2 &mpic 3 1
-				7000 0 0 3 &mpic 3 1
-				7000 0 0 4 &mpic 3 1
+				0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x3 &mpic 0x3 0x1
+				0x7000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 0d701c1bf539..09b4e16154d6 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -258,6 +258,21 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200-mdio";
+			reg = <3000 400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0:ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				reg = <1>;
+			};
 		};
 
 		ata@3a00 {
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 571ba02accac..2e9bc397ae9a 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -270,7 +270,7 @@
 		mdio@3000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio";
+			compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio";
 			reg = <3000 400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 			interrupt-parent = <&mpc5200_pic>;
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 710c01168179..84cc5e72ddd8 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -219,7 +219,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -247,7 +247,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 76951ab038ee..2b0dde058f8e 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -148,7 +148,6 @@
 			interrupt-parent = <&mpc5200_pic>;
 		};
 
-
 		spi@f00 {
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <f00 20>;
@@ -209,10 +208,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				reg = <2>;
+			};
 		};
 
 		ata@3a00 {
@@ -223,11 +237,19 @@
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <68>;
+			};
 		};
 
 		sram@8000 {
@@ -240,7 +262,8 @@
 		compatible = "fsl,lpb";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <1 0 50000000 00010000
+		ranges = <0 0 ff000000 01000000
+			  1 0 50000000 00010000
 			  2 0 50010000 00010000
 			  3 0 50020000 00010000>;
 
@@ -271,31 +294,15 @@
 			compatible = "promess,pro_module_dio";
 			reg = <3 800 2>;
 		};
-	};
 
-	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <f0000d00 100>;
-		interrupt-map-mask = <f800 0 0 7>;
-		interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
-				 c000 0 0 2 &mpc5200_pic 1 1 3
-				 c000 0 0 3 &mpc5200_pic 1 2 3
-				 c000 0 0 4 &mpc5200_pic 1 3 3
-
-				 c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
-				 c800 0 0 2 &mpc5200_pic 1 2 3
-				 c800 0 0 3 &mpc5200_pic 1 3 3
-				 c800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 a 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		bus-range = <0 0>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-			  02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 b0000000 0 01000000>;
+		// 16-bit flash device at LocalPlus Bus CS0
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 8fb542387436..4936349b87cd 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -1,7 +1,7 @@
 /*
  * MPC7448HPC2 (Taiga) board Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  * 2006 Roy Zang <Roy Zang at freescale.com>.
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "mpc7448hpc2";
@@ -23,11 +24,11 @@
 				
 		PowerPC,7448@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K bytes
-			i-cache-size = <8000>;		// L1, 32K bytes
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K bytes
+			i-cache-size = <0x8000>;		// L1, 32K bytes
 			timebase-frequency = <0>;	// 33 MHz, from uboot
 			clock-frequency = <0>;		// From U-Boot
 			bus-frequency = <0>;		// From U-Boot
@@ -36,7 +37,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 20000000	// DDR2   512M at 0
+		reg = <0x0 0x20000000	// DDR2   512M at 0
 		       >;
 	};
 
@@ -44,14 +45,14 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "tsi-bridge";
-		ranges = <00000000 c0000000 00010000>;
-		reg = <c0000000 00010000>;
+		ranges = <0x0 0xc0000000 0x10000>;
+		reg = <0xc0000000 0x10000>;
 		bus-frequency = <0>;
 
 		i2c@7000 {
 			interrupt-parent = <&mpic>;
-			interrupts = <E 0>;
-			reg = <7000 400>;
+			interrupts = <14 0>;
+			reg = <0x7000 0x400>;
 			device_type = "i2c";
 			compatible  = "tsi108-i2c";
 		};
@@ -59,20 +60,20 @@
 		MDIO: mdio@6000 {
 			device_type = "mdio";
 			compatible = "tsi108-mdio";
-			reg = <6000 50>;
+			reg = <0x6000 0x50>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			phy8: ethernet-phy@8 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <8>;
+				reg = <0x8>;
 			};
 
 			phy9: ethernet-phy@9 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <9>;
+				reg = <0x9>;
 			};
 
 		};
@@ -82,9 +83,9 @@
 			#size-cells = <0>;
 			device_type = "network";
 			compatible = "tsi108-ethernet";
-			reg = <6000 200>;
+			reg = <0x6000 0x200>;
 			address = [ 00 06 D2 00 00 01 ];
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 			interrupt-parent = <&mpic>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&phy8>;
@@ -96,9 +97,9 @@
 			#size-cells = <0>;
 			device_type = "network";
 			compatible = "tsi108-ethernet";
-			reg = <6400 200>;
+			reg = <0x6400 0x200>;
 			address = [ 00 06 D2 00 00 02 ];
-			interrupts = <11 2>;
+			interrupts = <17 2>;
 			interrupt-parent = <&mpic>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&phy9>;
@@ -107,18 +108,18 @@
 		serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7808 200>;
-			clock-frequency = <3f6b5a00>;
-			interrupts = <c 0>;
+			reg = <0x7808 0x200>;
+			clock-frequency = <1064000000>;
+			interrupts = <12 0>;
 			interrupt-parent = <&mpic>;
 		};
 
 		serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7c08 200>;
-			clock-frequency = <3f6b5a00>;
-			interrupts = <d 0>;
+			reg = <0x7c08 0x200>;
+			clock-frequency = <1064000000>;
+			interrupts = <13 0>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -127,7 +128,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <7400 400>;
+			reg = <0x7400 0x400>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                        	big-endian;
@@ -138,39 +139,39 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <1000 1000>;
+			reg = <0x1000 0x1000>;
 			bus-range = <0 0>;
-			ranges = <02000000 0 e0000000 e0000000 0 1A000000	
-				  01000000 0 00000000 fa000000 0 00010000>;
-			clock-frequency = <7f28154>;
+			ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000	
+				  0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>;
+			clock-frequency = <133333332>;
 			interrupt-parent = <&mpic>;
-			interrupts = <17 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupts = <23 2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 
 				/* IDSEL 0x11 */
-				0800 0 0 1 &RT0 24 0
-				0800 0 0 2 &RT0 25 0
-				0800 0 0 3 &RT0 26 0
-				0800 0 0 4 &RT0 27 0
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
 
 				/* IDSEL 0x12 */
-				1000 0 0 1 &RT0 25 0
-				1000 0 0 2 &RT0 26 0
-				1000 0 0 3 &RT0 27 0
-				1000 0 0 4 &RT0 24 0
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
 
 				/* IDSEL 0x13 */
-				1800 0 0 1 &RT0 26 0
-				1800 0 0 2 &RT0 27 0
-				1800 0 0 3 &RT0 24 0
-				1800 0 0 4 &RT0 25 0
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
 
 				/* IDSEL 0x14 */
-				2000 0 0 1 &RT0 27 0
-				2000 0 0 2 &RT0 24 0
-				2000 0 0 3 &RT0 25 0
-				2000 0 0 4 &RT0 26 0
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
 				>;
 
 			RT0: router@1180 {
@@ -180,7 +181,7 @@
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				big-endian;
-				interrupts = <17 2>;
+				interrupts = <23 2>;
 				interrupt-parent = <&mpic>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 7285ca1325fd..46e2da30c3dd 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8272 ADS Device Tree Source
  *
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,8 @@
  * option) any later version.
  */
 
+/dts-v1/;
+
 / {
 	model = "MPC8272ADS";
 	compatible = "fsl,mpc8272ads";
@@ -21,11 +23,11 @@
 
 		PowerPC,8272@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#32>;
-			i-cache-line-size = <d#32>;
-			d-cache-size = <d#16384>;
-			i-cache-size = <d#16384>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -34,7 +36,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@f0010100 {
@@ -42,21 +44,21 @@
 		             "fsl,pq2-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <f0010100 40>;
+		reg = <0xf0010100 0x40>;
 
-		ranges = <0 0 fe000000 02000000
-		          1 0 f4500000 00008000
-		          3 0 f8200000 00008000>;
+		ranges = <0x0 0x0 0xfe000000 0x2000000
+		          0x1 0x0 0xf4500000 0x8000
+		          0x3 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 2000000>;
+			reg = <0x0 0x0 0x2000000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		board-control@1,0 {
-			reg = <1 0 20>;
+			reg = <0x1 0x0 0x20>;
 			compatible = "fsl,mpc8272ads-bcsr";
 		};
 
@@ -65,46 +67,46 @@
 			             "fsl,pq2ads-pci-pic";
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			reg = <3 0 8>;
+			reg = <0x3 0x0 0x8>;
 			interrupt-parent = <&PIC>;
-			interrupts = <14 8>;
+			interrupts = <20 8>;
 		};
 	};
 
 
 	pci@f0010800 {
 		device_type = "pci";
-		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
 		compatible = "fsl,mpc8272-pci", "fsl,pq2-pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		clock-frequency = <d#66666666>;
-		interrupt-map-mask = <f800 0 0 7>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 		                 /* IDSEL 0x16 */
-		                 b000 0 0 1 &PCI_PIC 0
-		                 b000 0 0 2 &PCI_PIC 1
-		                 b000 0 0 3 &PCI_PIC 2
-		                 b000 0 0 4 &PCI_PIC 3
+		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
 
 		                 /* IDSEL 0x17 */
-		                 b800 0 0 1 &PCI_PIC 4
-		                 b800 0 0 2 &PCI_PIC 5
-		                 b800 0 0 3 &PCI_PIC 6
-		                 b800 0 0 4 &PCI_PIC 7
+		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
 
 		                 /* IDSEL 0x18 */
-		                 c000 0 0 1 &PCI_PIC 8
-		                 c000 0 0 2 &PCI_PIC 9
-		                 c000 0 0 3 &PCI_PIC a
-		                 c000 0 0 4 &PCI_PIC b>;
+		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
 
 		interrupt-parent = <&PIC>;
-		interrupts = <12 8>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-		          02000000 0 a0000000 a0000000 0 20000000
-		          01000000 0 00000000 f6000000 0 02000000>;
+		interrupts = <18 8>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
 	};
 
 	soc@f0000000 {
@@ -112,26 +114,26 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "fsl,mpc8272", "fsl,pq2-soc";
-		ranges = <00000000 f0000000 00053000>;
+		ranges = <0x0 0xf0000000 0x53000>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <f0000000 00053000>;
+		reg = <0xf0000000 0x53000>;
 
 		cpm@119c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8272-cpm", "fsl,cpm2";
-			reg = <119c0 30>;
+			reg = <0x119c0 0x30>;
 			ranges;
 
 			muram@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0 10000>;
+				ranges = <0x0 0x0 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9800 800>;
+					reg = <0x0 0x2000 0x9800 0x800>;
 				};
 			};
 
@@ -139,29 +141,29 @@
 				compatible = "fsl,mpc8272-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <119f0 10 115f0 10>;
+				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
 			serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a00 20 8000 100>;
-				interrupts = <28 8>;
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <00800000>;
+				fsl,cpm-command = <0x800000>;
 			};
 
 			serial@11a60 {
 				device_type = "serial";
 				compatible = "fsl,mpc8272-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a60 20 8300 100>;
-				interrupts = <2b 8>;
+				reg = <0x11a60 0x20 0x8300 0x100>;
+				interrupts = <43 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <4>;
-				fsl,cpm-command = <0ce00000>;
+				fsl,cpm-command = <0xce00000>;
 			};
 
 			mdio@10d40 {
@@ -169,23 +171,23 @@
 				compatible = "fsl,mpc8272ads-mdio-bitbang",
 				             "fsl,mpc8272-mdio-bitbang",
 				             "fsl,cpm2-mdio-bitbang";
-				reg = <10d40 14>;
+				reg = <0x10d40 0x14>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				fsl,mdio-pin = <12>;
-				fsl,mdc-pin = <13>;
+				fsl,mdio-pin = <18>;
+				fsl,mdc-pin = <19>;
 
 				PHY0: ethernet-phy@0 {
 					interrupt-parent = <&PIC>;
-					interrupts = <17 8>;
-					reg = <0>;
+					interrupts = <23 8>;
+					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
 
 				PHY1: ethernet-phy@1 {
 					interrupt-parent = <&PIC>;
-					interrupts = <17 8>;
-					reg = <3>;
+					interrupts = <23 8>;
+					reg = <0x3>;
 					device_type = "ethernet-phy";
 				};
 			};
@@ -194,33 +196,33 @@
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11300 20 8400 100 11390 1>;
+				reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <20 8>;
+				interrupts = <32 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY0>;
 				linux,network-index = <0>;
-				fsl,cpm-command = <12000300>;
+				fsl,cpm-command = <0x12000300>;
 			};
 
 			ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8272-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11320 20 8500 100 113b0 1>;
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <21 8>;
+				interrupts = <33 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY1>;
 				linux,network-index = <1>;
-				fsl,cpm-command = <16200300>;
+				fsl,cpm-command = <0x16200300>;
 			};
 		};
 
 		PIC: interrupt-controller@10c00 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			reg = <10c00 80>;
+			reg = <0x10c00 0x80>;
 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
@@ -232,14 +234,14 @@
 			             "fsl,talitos-sec2",
 			             "fsl,talitos",
 			             "talitos";
-			reg = <30000 10000>;
-			interrupts = <b 8>;
+			reg = <0x30000 0x10000>;
+			interrupts = <11 8>;
 			interrupt-parent = <&PIC>;
 			num-channels = <4>;
-			channel-fifo-len = <18>;
-			exec-units-mask = <0000007e>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x7e>;
 /* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <01010ebf>;
+			descriptor-types-mask = <0x1010ebf>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 9bb408371bcd..539e02fb3526 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -255,9 +255,7 @@
 		enet0: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <3>;
-			device-id = <3>;
 			reg = <0x2200 0x200>;
 			interrupts = <34>;
 			interrupt-parent = <&qeic>;
@@ -271,9 +269,7 @@
 		enet1: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <4>;
-			device-id = <4>;
 			reg = <0x3200 0x200>;
 			interrupts = <35>;
 			interrupt-parent = <&qeic>;
@@ -287,8 +283,7 @@
 		ucc@2400 {
 			device_type = "serial";
 			compatible = "ucc_uart";
-			model = "UCC";
-			device-id = <5>;	/* The UCC number, 1-7*/
+			cell-index = <5>;	/* The UCC number, 1-7*/
 			port-number = <0>;	/* Which ttyQEx device */
 			soft-uart;		/* We need Soft-UART */
 			reg = <0x2400 0x200>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 94f93d209de8..179c81c6a7ac 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -208,9 +208,7 @@
 		enet0: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <2>;
-			device-id = <2>;
 			reg = <0x3000 0x200>;
 			interrupts = <33>;
 			interrupt-parent = <&qeic>;
@@ -224,9 +222,7 @@
 		enet1: ucc@2200 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <3>;
-			device-id = <3>;
 			reg = <0x2200 0x200>;
 			interrupts = <34>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 55f03e8dc97f..8160ff24e87e 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -257,9 +257,7 @@
 		enet0: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <1>;
-			device-id = <1>;
 			reg = <0x2000 0x200>;
 			interrupts = <32>;
 			interrupt-parent = <&qeic>;
@@ -274,9 +272,7 @@
 		enet1: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <2>;
-			device-id = <2>;
 			reg = <0x3000 0x200>;
 			interrupts = <33>;
 			interrupt-parent = <&qeic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index a3637fff73cc..eac8e1b59496 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -47,6 +47,72 @@
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
 	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +157,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -99,7 +164,8 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
+			dr_mode = "host";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
@@ -189,14 +255,14 @@
 		};
 
 		sata@18000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x18000 0x1000>;
 			interrupts = <44 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@19000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x19000 0x1000>;
 			interrupts = <45 0x8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 440aa4dfab0c..5bc09ad016f5 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 533e9b06cc8f..1d6ea080ad73 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -47,6 +47,72 @@
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
 	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +157,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -99,7 +164,8 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
+			dr_mode = "host";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 92711534b179..711f9a30f9ab 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index c270685bbde4..6f78a9fd9826 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -47,6 +47,72 @@
 		reg = <0x00000000 0x20000000>;	// 512MB at 0
 	};
 
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// booting from NOR flash
+		ranges = <0 0x0 0xfe000000 0x02000000
+		          1 0x0 0xf8000000 0x00008000
+		          3 0x0 0xe0600000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0 0x0 0x2000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			fs@100000 {
+				reg = <0x100000 0x800000>;
+			};
+
+			kernel@1d00000 {
+				reg = <0x1d00000 0x200000>;
+			};
+
+			dtb@1f00000 {
+				reg = <0x1f00000 0x100000>;
+			};
+		};
+
+		bcsr@1,0 {
+			reg = <1 0x0 0x8000>;
+			compatible = "fsl,mpc837xmds-bcsr";
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <3 0x0 0x8000>;
+
+			u-boot@0 {
+				reg = <0x0 0x100000>;
+				read-only;
+			};
+
+			kernel@100000 {
+				reg = <0x100000 0x300000>;
+			};
+
+			fs@400000 {
+				reg = <0x400000 0x1c00000>;
+			};
+		};
+	};
+
 	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,7 +157,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -99,7 +164,8 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi_wide";
+			dr_mode = "host";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
@@ -189,28 +255,28 @@
 		};
 
 		sata@18000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x18000 0x1000>;
 			interrupts = <44 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@19000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x19000 0x1000>;
 			interrupts = <45 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@1a000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x1a000 0x1000>;
 			interrupts = <46 0x8>;
 			interrupt-parent = <&ipic>;
 		};
 
 		sata@1b000 {
-			compatible = "fsl,mpc8379-sata";
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
 			reg = <0x1b000 0x1000>;
 			interrupts = <47 0x8>;
 			interrupt-parent = <&ipic>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 0dda2fc558f8..c11ceb7d3299 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,7 +143,6 @@
 			mode = "cpu";
 		};
 
-		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,7 +150,7 @@
 			#size-cells = <0>;
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
-			phy_type = "utmi";
+			phy_type = "ulpi";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 975248491b7b..18033ed0b535 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8540 ADS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8540ADS";
@@ -31,11 +32,11 @@
 
 		PowerPC,8540@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -44,31 +45,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8540@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00100000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -76,8 +77,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -86,24 +87,24 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <7 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -113,9 +114,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -125,9 +126,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -137,9 +138,9 @@
 			device_type = "network";
 			model = "FEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2>;
+			interrupts = <41 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -148,9 +149,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>; 	// reg base, size
+			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -158,9 +159,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 		mpic: pic@40000 {
@@ -168,7 +169,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 			big-endian;
@@ -177,90 +178,90 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x02 */
-			1000 0 0 1 &mpic 1 1
-			1000 0 0 2 &mpic 2 1
-			1000 0 0 3 &mpic 3 1
-			1000 0 0 4 &mpic 4 1
+			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x03 */
-			1800 0 0 1 &mpic 4 1
-			1800 0 0 2 &mpic 1 1
-			1800 0 0 3 &mpic 2 1
-			1800 0 0 4 &mpic 3 1
+			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x04 */
-			2000 0 0 1 &mpic 3 1
-			2000 0 0 2 &mpic 4 1
-			2000 0 0 3 &mpic 1 1
-			2000 0 0 4 &mpic 2 1
+			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x05 */
-			2800 0 0 1 &mpic 2 1
-			2800 0 0 2 &mpic 3 1
-			2800 0 0 3 &mpic 4 1
-			2800 0 0 4 &mpic 1 1
+			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x0c */
-			6000 0 0 1 &mpic 1 1
-			6000 0 0 2 &mpic 2 1
-			6000 0 0 3 &mpic 3 1
-			6000 0 0 4 &mpic 4 1
+			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x0d */
-			6800 0 0 1 &mpic 4 1
-			6800 0 0 2 &mpic 1 1
-			6800 0 0 3 &mpic 2 1
-			6800 0 0 4 &mpic 3 1
+			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x0e */
-			7000 0 0 1 &mpic 3 1
-			7000 0 0 2 &mpic 4 1
-			7000 0 0 3 &mpic 1 1
-			7000 0 0 4 &mpic 2 1
+			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x0f */
-			7800 0 0 1 &mpic 2 1
-			7800 0 0 2 &mpic 3 1
-			7800 0 0 3 &mpic 4 1
-			7800 0 0 4 &mpic 1 1
+			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x12 */
-			9000 0 0 1 &mpic 1 1
-			9000 0 0 2 &mpic 2 1
-			9000 0 0 3 &mpic 3 1
-			9000 0 0 4 &mpic 4 1
+			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x13 */
-			9800 0 0 1 &mpic 4 1
-			9800 0 0 2 &mpic 1 1
-			9800 0 0 3 &mpic 2 1
-			9800 0 0 4 &mpic 3 1
+			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x14 */
-			a000 0 0 1 &mpic 3 1
-			a000 0 0 2 &mpic 4 1
-			a000 0 0 3 &mpic 1 1
-			a000 0 0 4 &mpic 2 1
+			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic 2 1
-			a800 0 0 2 &mpic 3 1
-			a800 0 0 3 &mpic 4 1
-			a800 0 0 4 &mpic 1 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index fa8d9aaad157..663c7c50ca45 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8541 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8541CDS";
@@ -31,11 +32,11 @@
 
 		PowerPC,8541@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -44,31 +45,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8541@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8541-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8541-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -76,8 +77,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -86,18 +87,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -107,9 +108,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -119,9 +120,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -130,9 +131,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>; 	// reg base, size
+			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -140,9 +141,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -151,7 +152,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -161,17 +162,17 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8541-cpm", "fsl,cpm2";
-			reg = <919c0 30>;
+			reg = <0x919c0 0x30>;
 			ranges;
 
 			muram@80000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 80000 10000>;
+				ranges = <0x0 0x80000 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9000 1000>;
+					reg = <0x0 0x2000 0x9000 0x1000>;
 				};
 			};
 
@@ -179,16 +180,16 @@
 				compatible = "fsl,mpc8541-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <919f0 10 915f0 10>;
+				reg = <0x919f0 0x10 0x915f0 0x10>;
 			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 2>;
+				interrupts = <46 2>;
 				interrupt-parent = <&mpic>;
-				reg = <90c00 80>;
+				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic";
 			};
 		};
@@ -196,68 +197,68 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <1f800 0 0 7>;
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x10 */
-			08000 0 0 1 &mpic 0 1
-			08000 0 0 2 &mpic 1 1
-			08000 0 0 3 &mpic 2 1
-			08000 0 0 4 &mpic 3 1
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x11 */
-			08800 0 0 1 &mpic 0 1
-			08800 0 0 2 &mpic 1 1
-			08800 0 0 3 &mpic 2 1
-			08800 0 0 4 &mpic 3 1
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x12 (Slot 1) */
-			09000 0 0 1 &mpic 0 1
-			09000 0 0 2 &mpic 1 1
-			09000 0 0 3 &mpic 2 1
-			09000 0 0 4 &mpic 3 1
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x13 (Slot 2) */
-			09800 0 0 1 &mpic 1 1
-			09800 0 0 2 &mpic 2 1
-			09800 0 0 3 &mpic 3 1
-			09800 0 0 4 &mpic 0 1
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x14 (Slot 3) */
-			0a000 0 0 1 &mpic 2 1
-			0a000 0 0 2 &mpic 3 1
-			0a000 0 0 3 &mpic 0 1
-			0a000 0 0 4 &mpic 1 1
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x15 (Slot 4) */
-			0a800 0 0 1 &mpic 3 1
-			0a800 0 0 2 &mpic 0 1
-			0a800 0 0 3 &mpic 1 1
-			0a800 0 0 4 &mpic 2 1
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* Bus 1 (Tundra Bridge) */
 			/* IDSEL 0x12 (ISA bridge) */
-			19000 0 0 1 &mpic 0 1
-			19000 0 0 2 &mpic 1 1
-			19000 0 0 3 &mpic 2 1
-			19000 0 0 4 &mpic 3 1>;
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		i8259@19000 {
 			interrupt-controller;
 			device_type = "interrupt-controller";
-			reg = <19000 0 0 0 1>;
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			compatible = "chrp,iic";
@@ -268,24 +269,24 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic b 1
-			a800 0 0 3 &mpic b 1
-			a800 0 0 4 &mpic b 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 688af9d06382..6a0d8db96d97 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8544 DS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 / {
 	model = "MPC8544DS";
 	compatible = "MPC8544DS", "MPC85xxDS";
@@ -27,17 +28,16 @@
 	};
 
 	cpus {
-		#cpus = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
 		PowerPC,8544@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -46,7 +46,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0x0 0x0>;	// Filled by U-Boot
 	};
 
 	soc8544@e0000000 {
@@ -54,24 +54,24 @@
 		#size-cells = <1>;
 		device_type = "soc";
 
-		ranges = <00000000 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
 			compatible = "fsl,8544-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8544-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -79,8 +79,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -90,8 +90,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -100,30 +100,71 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <0>;
+				interrupts = <10 1>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <1>;
+				interrupts = <10 1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8544-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8544-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
@@ -134,9 +175,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
@@ -146,9 +187,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -156,15 +197,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -173,7 +214,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 			big-endian;
@@ -184,32 +225,32 @@
 		cell-index = <0>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x11 J17 Slot 1 */
-			8800 0 0 1 &mpic 2 1
-			8800 0 0 2 &mpic 3 1
-			8800 0 0 3 &mpic 4 1
-			8800 0 0 4 &mpic 1 1
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x12 J16 Slot 2 */
 
-			9000 0 0 1 &mpic 3 1
-			9000 0 0 2 &mpic 4 1
-			9000 0 0 3 &mpic 2 1
-			9000 0 0 4 &mpic 1 1>;
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x1 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 c0000000 c0000000 0 20000000
-			  01000000 0 00000000 e1000000 0 00010000>;
-		clock-frequency = <3f940aa>;
+		interrupts = <24 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe1000000 0x0 0x10000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 	};
 
 	pci1: pcie@e0009000 {
@@ -219,33 +260,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e1010000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xe0009000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00010000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
 		};
 	};
 
@@ -256,33 +297,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 e1020000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xe000a000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 10000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00010000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
 		};
 	};
 
@@ -293,72 +334,72 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000b000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 b0000000 b0000000 0 00100000
-			  01000000 0 00000000 b0100000 0 00100000>;
-		clock-frequency = <1fca055>;
+		reg = <0xe000b000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xb0000000 0xb0000000 0x0 0x100000
+			  0x1000000 0x0 0x0 0xb0100000 0x0 0x100000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1b 2>;
-		interrupt-map-mask = <ff00 0 0 1>;
+		interrupts = <27 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x1>;
 		interrupt-map = <
 			// IDSEL 0x1c  USB
-			e000 0 0 1 &i8259 c 2
-			e100 0 0 2 &i8259 9 2
-			e200 0 0 3 &i8259 a 2
-			e300 0 0 4 &i8259 b 2
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 1 &i8259 6 2
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 1 &i8259 7 2
-			f100 0 0 1 &i8259 7 2
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 1 &i8259 e 2
-			f900 0 0 1 &i8259 5 2
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
 		>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 b0000000
-				  02000000 0 b0000000
-				  0 00100000
+			ranges = <0x2000000 0x0 0xb0000000
+				  0x2000000 0x0 0xb0000000
+				  0x0 0x100000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 
 			uli1575@0 {
-				reg = <0 0 0 0 0>;
+				reg = <0x0 0x0 0x0 0x0 0x0>;
 				#size-cells = <2>;
 				#address-cells = <3>;
-				ranges = <02000000 0 b0000000
-					  02000000 0 b0000000
-					  0 00100000
+				ranges = <0x2000000 0x0 0xb0000000
+					  0x2000000 0x0 0xb0000000
+					  0x0 0x100000
 
-					  01000000 0 00000000
-					  01000000 0 00000000
-					  0 00100000>;
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x100000>;
 				isa@1e {
 					device_type = "isa";
 					#interrupt-cells = <2>;
 					#size-cells = <1>;
 					#address-cells = <2>;
-					reg = <f000 0 0 0 0>;
-					ranges = <1 0
-						  01000000 0 0
-						  00001000>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0
+						  0x1000000 0x0 0x0
+						  0x1000>;
 					interrupt-parent = <&i8259>;
 
 					i8259: interrupt-controller@20 {
-						reg = <1 20 2
-						       1 a0 2
-						       1 4d0 2>;
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
 						interrupt-controller;
 						device_type = "interrupt-controller";
 						#address-cells = <0>;
@@ -371,28 +412,28 @@
 					i8042@60 {
 						#size-cells = <0>;
 						#address-cells = <1>;
-						reg = <1 60 1 1 64 1>;
-						interrupts = <1 3 c 3>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
 						interrupt-parent = <&i8259>;
 
 						keyboard@0 {
-							reg = <0>;
+							reg = <0x0>;
 							compatible = "pnpPNP,303";
 						};
 
 						mouse@1 {
-							reg = <1>;
+							reg = <0x1>;
 							compatible = "pnpPNP,f03";
 						};
 					};
 
 					rtc@70 {
 						compatible = "pnpPNP,b00";
-						reg = <1 70 2>;
+						reg = <0x1 0x70 0x2>;
 					};
 
 					gpio@400 {
-						reg = <1 400 80>;
+						reg = <0x1 0x400 0x80>;
 					};
 				};
 			};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 1f470c6a1c63..fa298a8c81cc 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8548 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8548CDS";
@@ -36,11 +37,11 @@
 
 		PowerPC,8548@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -49,31 +50,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8548@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <00000000 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8548-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -81,8 +82,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -92,8 +93,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -102,30 +103,30 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -135,9 +136,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -147,9 +148,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -160,9 +161,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};
@@ -172,9 +173,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <27000 1000>;
+			reg = <0x27000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <25 2 26 2 27 2>;
+			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -184,9 +185,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;	// reg base, size
+			reg = <0x4500 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -194,15 +195,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>;	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities reg
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -211,7 +212,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -220,139 +221,139 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x4 (PCIX Slot 2) */
-			02000 0 0 1 &mpic 0 1
-			02000 0 0 2 &mpic 1 1
-			02000 0 0 3 &mpic 2 1
-			02000 0 0 4 &mpic 3 1
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x5 (PCIX Slot 3) */
-			02800 0 0 1 &mpic 1 1
-			02800 0 0 2 &mpic 2 1
-			02800 0 0 3 &mpic 3 1
-			02800 0 0 4 &mpic 0 1
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x6 (PCIX Slot 4) */
-			03000 0 0 1 &mpic 2 1
-			03000 0 0 2 &mpic 3 1
-			03000 0 0 3 &mpic 0 1
-			03000 0 0 4 &mpic 1 1
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x8 (PCIX Slot 5) */
-			04000 0 0 1 &mpic 0 1
-			04000 0 0 2 &mpic 1 1
-			04000 0 0 3 &mpic 2 1
-			04000 0 0 4 &mpic 3 1
+			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0xC (Tsi310 bridge) */
-			06000 0 0 1 &mpic 0 1
-			06000 0 0 2 &mpic 1 1
-			06000 0 0 3 &mpic 2 1
-			06000 0 0 4 &mpic 3 1
+			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x14 (Slot 2) */
-			0a000 0 0 1 &mpic 0 1
-			0a000 0 0 2 &mpic 1 1
-			0a000 0 0 3 &mpic 2 1
-			0a000 0 0 4 &mpic 3 1
+			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x15 (Slot 3) */
-			0a800 0 0 1 &mpic 1 1
-			0a800 0 0 2 &mpic 2 1
-			0a800 0 0 3 &mpic 3 1
-			0a800 0 0 4 &mpic 0 1
+			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x16 (Slot 4) */
-			0b000 0 0 1 &mpic 2 1
-			0b000 0 0 2 &mpic 3 1
-			0b000 0 0 3 &mpic 0 1
-			0b000 0 0 4 &mpic 1 1
+			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x18 (Slot 5) */
-			0c000 0 0 1 &mpic 0 1
-			0c000 0 0 2 &mpic 1 1
-			0c000 0 0 3 &mpic 2 1
-			0c000 0 0 4 &mpic 3 1
+			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-			0E000 0 0 1 &mpic 0 1
-			0E000 0 0 2 &mpic 1 1
-			0E000 0 0 3 &mpic 2 1
-			0E000 0 0 4 &mpic 3 1>;
+			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 10000000
-			  01000000 0 00000000 e2000000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		pci_bridge@1c {
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 
 				/* IDSEL 0x00 (PrPMC Site) */
-				0000 0 0 1 &mpic 0 1
-				0000 0 0 2 &mpic 1 1
-				0000 0 0 3 &mpic 2 1
-				0000 0 0 4 &mpic 3 1
+				0000 0x0 0x0 0x1 &mpic 0x0 0x1
+				0000 0x0 0x0 0x2 &mpic 0x1 0x1
+				0000 0x0 0x0 0x3 &mpic 0x2 0x1
+				0000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x04 (VIA chip) */
-				2000 0 0 1 &mpic 0 1
-				2000 0 0 2 &mpic 1 1
-				2000 0 0 3 &mpic 2 1
-				2000 0 0 4 &mpic 3 1
+				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1
+				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1
+				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1
+				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x05 (8139) */
-				2800 0 0 1 &mpic 1 1
+				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1
 
 				/* IDSEL 0x06 (Slot 6) */
-				3000 0 0 1 &mpic 2 1
-				3000 0 0 2 &mpic 3 1
-				3000 0 0 3 &mpic 0 1
-				3000 0 0 4 &mpic 1 1
+				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1
+				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1
+				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1
+				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDESL 0x07 (Slot 7) */
-				3800 0 0 1 &mpic 3 1
-				3800 0 0 2 &mpic 0 1
-				3800 0 0 3 &mpic 1 1
-				3800 0 0 4 &mpic 2 1>;
+				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1
+				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1
+				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1
+				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1>;
 
-			reg = <e000 0 0 0 0>;
+			reg = <0xe000 0x0 0x0 0x0 0x0>;
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00080000>;
-			clock-frequency = <1fca055>;
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x80000>;
+			clock-frequency = <33333333>;
 
 			isa@4 {
 				device_type = "isa";
 				#interrupt-cells = <2>;
 				#size-cells = <1>;
 				#address-cells = <2>;
-				reg = <2000 0 0 0 0>;
-				ranges = <1 0 01000000 0 0 00001000>;
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
 				interrupt-parent = <&i8259>;
 
 				i8259: interrupt-controller@20 {
 					interrupt-controller;
 					device_type = "interrupt-controller";
-					reg = <1 20 2
-					       1 a0 2
-					       1 4d0 2>;
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
 					#address-cells = <0>;
 					#interrupt-cells = <2>;
 					compatible = "chrp,iic";
@@ -362,7 +363,7 @@
 
 				rtc@70 {
 					compatible = "pnpPNP,b00";
-					reg = <1 70 2>;
+					reg = <0x1 0x70 0x2>;
 				};
 			};
 		};
@@ -370,64 +371,64 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic 1 1
-			a800 0 0 3 &mpic 2 1
-			a800 0 0 4 &mpic 3 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 90000000 90000000 0 10000000
-			  01000000 0 00000000 e2800000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
 
 	pci2: pcie@e000a000 {
 		cell-index = <2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x0 (PEX) */
-			00000 0 0 1 &mpic 0 1
-			00000 0 0 2 &mpic 1 1
-			00000 0 0 3 &mpic 2 1
-			00000 0 0 4 &mpic 3 1>;
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 08000000>;
-		clock-frequency = <1fca055>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>;
+		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
+		reg = <0xe000a000 0x1000>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 08000000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x8000000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index 4538f3c38862..b025c566c10d 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8555 CDS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8555CDS";
@@ -31,11 +32,11 @@
 
 		PowerPC,8555@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
@@ -44,31 +45,31 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 08000000>;	// 128M at 0x0
+		reg = <0x0 0x8000000>;	// 128M at 0x0
 	};
 
 	soc8555@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00001000>;	// CCSRBAR 1M
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8555-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8555-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -76,8 +77,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -86,18 +87,18 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -107,9 +108,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -119,9 +120,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -130,9 +131,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>; 	// reg base, size
+			reg = <0x4500 0x100>; 	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -140,9 +141,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;	// reg base, size
+			reg = <0x4600 0x100>;	// reg base, size
 			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -151,7 +152,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
@@ -161,17 +162,17 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
-			reg = <919c0 30>;
+			reg = <0x919c0 0x30>;
 			ranges;
 
 			muram@80000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 80000 10000>;
+				ranges = <0x0 0x80000 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9000 1000>;
+					reg = <0x0 0x2000 0x9000 0x1000>;
 				};
 			};
 
@@ -179,16 +180,16 @@
 				compatible = "fsl,mpc8555-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <919f0 10 915f0 10>;
+				reg = <0x919f0 0x10 0x915f0 0x10>;
 			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 2>;
+				interrupts = <46 2>;
 				interrupt-parent = <&mpic>;
-				reg = <90c00 80>;
+				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
 			};
 		};
@@ -196,68 +197,68 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <1f800 0 0 7>;
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x10 */
-			08000 0 0 1 &mpic 0 1
-			08000 0 0 2 &mpic 1 1
-			08000 0 0 3 &mpic 2 1
-			08000 0 0 4 &mpic 3 1
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x11 */
-			08800 0 0 1 &mpic 0 1
-			08800 0 0 2 &mpic 1 1
-			08800 0 0 3 &mpic 2 1
-			08800 0 0 4 &mpic 3 1
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x12 (Slot 1) */
-			09000 0 0 1 &mpic 0 1
-			09000 0 0 2 &mpic 1 1
-			09000 0 0 3 &mpic 2 1
-			09000 0 0 4 &mpic 3 1
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
 
 			/* IDSEL 0x13 (Slot 2) */
-			09800 0 0 1 &mpic 1 1
-			09800 0 0 2 &mpic 2 1
-			09800 0 0 3 &mpic 3 1
-			09800 0 0 4 &mpic 0 1
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
 
 			/* IDSEL 0x14 (Slot 3) */
-			0a000 0 0 1 &mpic 2 1
-			0a000 0 0 2 &mpic 3 1
-			0a000 0 0 3 &mpic 0 1
-			0a000 0 0 4 &mpic 1 1
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x15 (Slot 4) */
-			0a800 0 0 1 &mpic 3 1
-			0a800 0 0 2 &mpic 0 1
-			0a800 0 0 3 &mpic 1 1
-			0a800 0 0 4 &mpic 2 1
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* Bus 1 (Tundra Bridge) */
 			/* IDSEL 0x12 (ISA bridge) */
-			19000 0 0 1 &mpic 0 1
-			19000 0 0 2 &mpic 1 1
-			19000 0 0 3 &mpic 2 1
-			19000 0 0 4 &mpic 3 1>;
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 
 		i8259@19000 {
 			interrupt-controller;
 			device_type = "interrupt-controller";
-			reg = <19000 0 0 0 1>;
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			compatible = "chrp,iic";
@@ -268,24 +269,24 @@
 
 	pci1: pci@e0009000 {
 		cell-index = <1>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x15 */
-			a800 0 0 1 &mpic b 1
-			a800 0 0 2 &mpic b 1
-			a800 0 0 3 &mpic b 1
-			a800 0 0 4 &mpic b 1>;
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
 		interrupt-parent = <&mpic>;
-		interrupts = <19 2>;
+		interrupts = <25 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 e3000000 0 00100000>;
-		clock-frequency = <3f940aa>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0009000 1000>;
+		reg = <0xe0009000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 639ce8a709a6..0cc16ab305d1 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8560 ADS Device Tree Source
  *
- * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC8560ADS";
@@ -32,74 +33,74 @@
 
 		PowerPC,8560@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
-			timebase-frequency = <04ead9a0>;
-			bus-frequency = <13ab6680>;
-			clock-frequency = <312c8040>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <82500000>;
+			bus-frequency = <330000000>;
+			clock-frequency = <825000000>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 10000000>;
+		reg = <0x0 0x10000000>;
 	};
 
 	soc8560@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00000200>;
-		bus-frequency = <13ab6680>;
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x200>;
+		bus-frequency = <330000000>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <40000>;	// L2, 256K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <5 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <7 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <7 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -109,9 +110,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 		};
@@ -121,9 +122,9 @@
 			device_type = "network";
 			model = "TSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 		};
@@ -132,7 +133,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
 		};
 
@@ -140,17 +141,17 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <919c0 30>;
+			reg = <0x919c0 0x30>;
 			ranges;
 
 			muram@80000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 80000 10000>;
+				ranges = <0x0 0x80000 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 4000 9000 2000>;
+					reg = <0x0 0x4000 0x9000 0x2000>;
 				};
 			};
 
@@ -158,17 +159,17 @@
 				compatible = "fsl,mpc8560-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <919f0 10 915f0 10>;
-				clock-frequency = <d#165000000>;
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+				clock-frequency = <165000000>;
 			};
 
 			cpmpic: pic@90c00 {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <2>;
-				interrupts = <2e 2>;
+				interrupts = <46 2>;
 				interrupt-parent = <&mpic>;
-				reg = <90c00 80>;
+				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
 
@@ -176,11 +177,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc8560-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <91a00 20 88000 100>;
+				reg = <0x91a00 0x20 0x88000 0x100>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <00800000>;
-				current-speed = <1c200>;
-				interrupts = <28 8>;
+				fsl,cpm-command = <0x800000>;
+				current-speed = <115200>;
+				interrupts = <40 8>;
 				interrupt-parent = <&cpmpic>;
 			};
 
@@ -188,11 +189,11 @@
 				device_type = "serial";
 				compatible = "fsl,mpc8560-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <91a20 20 88100 100>;
+				reg = <0x91a20 0x20 0x88100 0x100>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <04a00000>;
-				current-speed = <1c200>;
-				interrupts = <29 8>;
+				fsl,cpm-command = <0x4a00000>;
+				current-speed = <115200>;
+				interrupts = <41 8>;
 				interrupt-parent = <&cpmpic>;
 			};
 
@@ -200,10 +201,10 @@
 				device_type = "network";
 				compatible = "fsl,mpc8560-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <91320 20 88500 100 913b0 1>;
+				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <16200300>;
-				interrupts = <21 8>;
+				fsl,cpm-command = <0x16200300>;
+				interrupts = <33 8>;
 				interrupt-parent = <&cpmpic>;
 				phy-handle = <&phy2>;
 			};
@@ -212,10 +213,10 @@
 				device_type = "network";
 				compatible = "fsl,mpc8560-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <91340 20 88600 100 913d0 1>;
+				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <1a400300>;
-				interrupts = <22 8>;
+				fsl,cpm-command = <0x1a400300>;
+				interrupts = <34 8>;
 				interrupt-parent = <&cpmpic>;
 				phy-handle = <&phy3>;
 			};
@@ -229,87 +230,87 @@
 		#address-cells = <3>;
 		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
 		device_type = "pci";
-		reg = <e0008000 1000>;
-		clock-frequency = <3f940aa>;
-		interrupt-map-mask = <f800 0 0 7>;
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 				/* IDSEL 0x2 */
-				 1000 0 0 1 &mpic 1 1
-				 1000 0 0 2 &mpic 2 1
-				 1000 0 0 3 &mpic 3 1
-				 1000 0 0 4 &mpic 4 1
+				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 				/* IDSEL 0x3 */
-				 1800 0 0 1 &mpic 4 1
-				 1800 0 0 2 &mpic 1 1
-				 1800 0 0 3 &mpic 2 1
-				 1800 0 0 4 &mpic 3 1
+				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 0x4 */
-				 2000 0 0 1 &mpic 3 1
-				 2000 0 0 2 &mpic 4 1
-				 2000 0 0 3 &mpic 1 1
-				 2000 0 0 4 &mpic 2 1
+				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 				/* IDSEL 0x5  */
-				 2800 0 0 1 &mpic 2 1
-				 2800 0 0 2 &mpic 3 1
-				 2800 0 0 3 &mpic 4 1
-				 2800 0 0 4 &mpic 1 1
+				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDSEL 12 */
-				 6000 0 0 1 &mpic 1 1
-				 6000 0 0 2 &mpic 2 1
-				 6000 0 0 3 &mpic 3 1
-				 6000 0 0 4 &mpic 4 1
+				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 				/* IDSEL 13 */
-				 6800 0 0 1 &mpic 4 1
-				 6800 0 0 2 &mpic 1 1
-				 6800 0 0 3 &mpic 2 1
-				 6800 0 0 4 &mpic 3 1
+				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 14*/
-				 7000 0 0 1 &mpic 3 1
-				 7000 0 0 2 &mpic 4 1
-				 7000 0 0 3 &mpic 1 1
-				 7000 0 0 4 &mpic 2 1
+				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 				/* IDSEL 15 */
-				 7800 0 0 1 &mpic 2 1
-				 7800 0 0 2 &mpic 3 1
-				 7800 0 0 3 &mpic 4 1
-				 7800 0 0 4 &mpic 1 1
+				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 				/* IDSEL 18 */
-				 9000 0 0 1 &mpic 1 1
-				 9000 0 0 2 &mpic 2 1
-				 9000 0 0 3 &mpic 3 1
-				 9000 0 0 4 &mpic 4 1
+				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
+				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
+				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
+				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 				/* IDSEL 19 */
-				 9800 0 0 1 &mpic 4 1
-				 9800 0 0 2 &mpic 1 1
-				 9800 0 0 3 &mpic 2 1
-				 9800 0 0 4 &mpic 3 1
+				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
+				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
+				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
+				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
 
 				/* IDSEL 20 */
-				 a000 0 0 1 &mpic 3 1
-				 a000 0 0 2 &mpic 4 1
-				 a000 0 0 3 &mpic 1 1
-				 a000 0 0 4 &mpic 2 1
+				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
+				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
+				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
+				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 				/* IDSEL 21 */
-				 a800 0 0 1 &mpic 2 1
-				 a800 0 0 2 &mpic 3 1
-				 a800 0 0 3 &mpic 4 1
-				 a800 0 0 4 &mpic 1 1>;
+				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
+				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
+				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
+				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
+		interrupts = <24 2>;
 		bus-range = <0 0>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 01000000>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index 97bc048f2158..a025a8ededc5 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8568E MDS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,10 +9,7 @@
  * option) any later version.
  */
 
-
-/*
-/memreserve/	00000000 1000000;
-*/
+/dts-v1/;
 
 / {
 	model = "MPC8568EMDS";
@@ -37,11 +34,11 @@
 
 		PowerPC,8568@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -50,36 +47,36 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 10000000>;
+		reg = <0x0 0x10000000>;
 	};
 
 	bcsr@f8000000 {
 		device_type = "board-control";
-		reg = <f8000000 8000>;
+		reg = <0xf8000000 0x8000>;
 	};
 
 	soc8568@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 e0000000 00100000>;
-		reg = <e0000000 00001000>;
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
 
 		memory-controller@2000 {
 			compatible = "fsl,8568-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,8568-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -87,14 +84,14 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 
 			rtc@68 {
 				compatible = "dallas,ds1374";
-				reg = <68>;
+				reg = <0x68>;
 			};
 		};
 
@@ -103,8 +100,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -113,30 +110,30 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@7 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <7>;
+				reg = <0x7>;
 				device_type = "ethernet-phy";
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -146,9 +143,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
- 			interrupts = <1d 2 1e 2 22 2>;
+ 			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 		};
@@ -158,9 +155,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
- 			interrupts = <23 2 24 2 28 2>;
+ 			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 		};
@@ -169,15 +166,15 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8548-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -185,9 +182,9 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -195,13 +192,13 @@
 			device_type = "crypto";
 			model = "SEC2";
 			compatible = "talitos";
-			reg = <30000 f000>;
-			interrupts = <2d 2>;
+			reg = <0x30000 0xf000>;
+			interrupts = <45 2>;
 			interrupt-parent = <&mpic>;
 			num-channels = <4>;
-			channel-fifo-len = <18>;
-			exec-units-mask = <000000fe>;
-			descriptor-types-mask = <012b0ebf>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0xfe>;
+			descriptor-types-mask = <0x12b0ebf>;
 		};
 
 		mpic: pic@40000 {
@@ -209,73 +206,73 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
                         big-endian;
 		};
 
 		par_io@e0100 {
-			reg = <e0100 100>;
+			reg = <0xe0100 0x100>;
 			device_type = "par_io";
 			num-ports = <7>;
 
 			pio1: ucc_pin@01 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
-					4  0a  1  0  2  0 	/* TxD0 */
-					4  09  1  0  2  0 	/* TxD1 */
-					4  08  1  0  2  0 	/* TxD2 */
-					4  07  1  0  2  0 	/* TxD3 */
-					4  17  1  0  2  0 	/* TxD4 */
-					4  16  1  0  2  0 	/* TxD5 */
-					4  15  1  0  2  0 	/* TxD6 */
-					4  14  1  0  2  0 	/* TxD7 */
-					4  0f  2  0  2  0 	/* RxD0 */
-					4  0e  2  0  2  0 	/* RxD1 */
-					4  0d  2  0  2  0 	/* RxD2 */
-					4  0c  2  0  2  0 	/* RxD3 */
-					4  1d  2  0  2  0 	/* RxD4 */
-					4  1c  2  0  2  0 	/* RxD5 */
-					4  1b  2  0  2  0 	/* RxD6 */
-					4  1a  2  0  2  0 	/* RxD7 */
-					4  0b  1  0  2  0 	/* TX_EN */
-					4  18  1  0  2  0 	/* TX_ER */
-					4  10  2  0  2  0 	/* RX_DV */
-					4  1e  2  0  2  0 	/* RX_ER */
-					4  11  2  0  2  0 	/* RX_CLK */
-					4  13  1  0  2  0 	/* GTX_CLK */
-					1  1f  2  0  3  0>;	/* GTX125 */
+					0x4  0xa  0x1  0x0  0x2  0x0 	/* TxD0 */
+					0x4  0x9  0x1  0x0  0x2  0x0 	/* TxD1 */
+					0x4  0x8  0x1  0x0  0x2  0x0 	/* TxD2 */
+					0x4  0x7  0x1  0x0  0x2  0x0 	/* TxD3 */
+					0x4  0x17  0x1  0x0  0x2  0x0 	/* TxD4 */
+					0x4  0x16  0x1  0x0  0x2  0x0 	/* TxD5 */
+					0x4  0x15  0x1  0x0  0x2  0x0 	/* TxD6 */
+					0x4  0x14  0x1  0x0  0x2  0x0 	/* TxD7 */
+					0x4  0xf  0x2  0x0  0x2  0x0 	/* RxD0 */
+					0x4  0xe  0x2  0x0  0x2  0x0 	/* RxD1 */
+					0x4  0xd  0x2  0x0  0x2  0x0 	/* RxD2 */
+					0x4  0xc  0x2  0x0  0x2  0x0 	/* RxD3 */
+					0x4  0x1d  0x2  0x0  0x2  0x0 	/* RxD4 */
+					0x4  0x1c  0x2  0x0  0x2  0x0 	/* RxD5 */
+					0x4  0x1b  0x2  0x0  0x2  0x0 	/* RxD6 */
+					0x4  0x1a  0x2  0x0  0x2  0x0 	/* RxD7 */
+					0x4  0xb  0x1  0x0  0x2  0x0 	/* TX_EN */
+					0x4  0x18  0x1  0x0  0x2  0x0 	/* TX_ER */
+					0x4  0x10  0x2  0x0  0x2  0x0 	/* RX_DV */
+					0x4  0x1e  0x2  0x0  0x2  0x0 	/* RX_ER */
+					0x4  0x11  0x2  0x0  0x2  0x0 	/* RX_CLK */
+					0x4  0x13  0x1  0x0  0x2  0x0 	/* GTX_CLK */
+					0x1  0x1f  0x2  0x0  0x3  0x0>;	/* GTX125 */
 			};
 
 			pio2: ucc_pin@02 {
 				pio-map = <
 			/* port  pin  dir  open_drain  assignment  has_irq */
-					5  0a 1  0  2  0   /* TxD0 */
-					5  09 1  0  2  0   /* TxD1 */
-					5  08 1  0  2  0   /* TxD2 */
-					5  07 1  0  2  0   /* TxD3 */
-					5  17 1  0  2  0   /* TxD4 */
-					5  16 1  0  2  0   /* TxD5 */
-					5  15 1  0  2  0   /* TxD6 */
-					5  14 1  0  2  0   /* TxD7 */
-					5  0f 2  0  2  0   /* RxD0 */
-					5  0e 2  0  2  0   /* RxD1 */
-					5  0d 2  0  2  0   /* RxD2 */
-					5  0c 2  0  2  0   /* RxD3 */
-					5  1d 2  0  2  0   /* RxD4 */
-					5  1c 2  0  2  0   /* RxD5 */
-					5  1b 2  0  2  0   /* RxD6 */
-					5  1a 2  0  2  0   /* RxD7 */
-					5  0b 1  0  2  0   /* TX_EN */
-					5  18 1  0  2  0   /* TX_ER */
-					5  10 2  0  2  0   /* RX_DV */
-					5  1e 2  0  2  0   /* RX_ER */
-					5  11 2  0  2  0   /* RX_CLK */
-					5  13 1  0  2  0   /* GTX_CLK */
-					1  1f 2  0  3  0   /* GTX125 */
-					4  06 3  0  2  0   /* MDIO */
-					4  05 1  0  2  0>; /* MDC */
+					0x5  0xa 0x1  0x0  0x2  0x0   /* TxD0 */
+					0x5  0x9 0x1  0x0  0x2  0x0   /* TxD1 */
+					0x5  0x8 0x1  0x0  0x2  0x0   /* TxD2 */
+					0x5  0x7 0x1  0x0  0x2  0x0   /* TxD3 */
+					0x5  0x17 0x1  0x0  0x2  0x0   /* TxD4 */
+					0x5  0x16 0x1  0x0  0x2  0x0   /* TxD5 */
+					0x5  0x15 0x1  0x0  0x2  0x0   /* TxD6 */
+					0x5  0x14 0x1  0x0  0x2  0x0   /* TxD7 */
+					0x5  0xf 0x2  0x0  0x2  0x0   /* RxD0 */
+					0x5  0xe 0x2  0x0  0x2  0x0   /* RxD1 */
+					0x5  0xd 0x2  0x0  0x2  0x0   /* RxD2 */
+					0x5  0xc 0x2  0x0  0x2  0x0   /* RxD3 */
+					0x5  0x1d 0x2  0x0  0x2  0x0   /* RxD4 */
+					0x5  0x1c 0x2  0x0  0x2  0x0   /* RxD5 */
+					0x5  0x1b 0x2  0x0  0x2  0x0   /* RxD6 */
+					0x5  0x1a 0x2  0x0  0x2  0x0   /* RxD7 */
+					0x5  0xb 0x1  0x0  0x2  0x0   /* TX_EN */
+					0x5  0x18 0x1  0x0  0x2  0x0   /* TX_ER */
+					0x5  0x10 0x2  0x0  0x2  0x0   /* RX_DV */
+					0x5  0x1e 0x2  0x0  0x2  0x0   /* RX_ER */
+					0x5  0x11 0x2  0x0  0x2  0x0   /* RX_CLK */
+					0x5  0x13 0x1  0x0  0x2  0x0   /* GTX_CLK */
+					0x1  0x1f 0x2  0x0  0x3  0x0   /* GTX125 */
+					0x4  0x6 0x3  0x0  0x2  0x0   /* MDIO */
+					0x4  0x5 0x1  0x0  0x2  0x0>; /* MDC */
 			};
 		};
 	};
@@ -285,28 +282,28 @@
 		#size-cells = <1>;
 		device_type = "qe";
 		compatible = "fsl,qe";
-		ranges = <0 e0080000 00040000>;
-		reg = <e0080000 480>;
+		ranges = <0x0 0xe0080000 0x40000>;
+		reg = <0xe0080000 0x480>;
 		brg-frequency = <0>;
-		bus-frequency = <179A7B00>;
+		bus-frequency = <396000000>;
 
 		muram@10000 {
  			#address-cells = <1>;
  			#size-cells = <1>;
 			compatible = "fsl,qe-muram", "fsl,cpm-muram";
-			ranges = <0 00010000 0000c000>;
+			ranges = <0x0 0x10000 0x10000>;
 
 			data-only@0 {
 				compatible = "fsl,qe-muram-data",
 					     "fsl,cpm-muram-data";
-				reg = <0 c000>;
+				reg = <0x0 0x10000>;
 			};
 		};
 
 		spi@4c0 {
 			cell-index = <0>;
 			compatible = "fsl,spi";
-			reg = <4c0 40>;
+			reg = <0x4c0 0x40>;
 			interrupts = <2>;
 			interrupt-parent = <&qeic>;
 			mode = "cpu";
@@ -315,7 +312,7 @@
 		spi@500 {
 			cell-index = <1>;
 			compatible = "fsl,spi";
-			reg = <500 40>;
+			reg = <0x500 0x40>;
 			interrupts = <1>;
 			interrupt-parent = <&qeic>;
 			mode = "cpu";
@@ -324,11 +321,9 @@
 		enet2: ucc@2000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <1>;
-			device-id = <1>;
-			reg = <2000 200>;
-			interrupts = <20>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
 			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
@@ -341,11 +336,9 @@
 		enet3: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
-			model = "UCC";
 			cell-index = <2>;
-			device-id = <2>;
-			reg = <3000 200>;
-			interrupts = <21>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
 			interrupt-parent = <&qeic>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
@@ -358,7 +351,7 @@
 		mdio@2120 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <2120 18>;
+			reg = <0x2120 0x18>;
 			compatible = "fsl,ucc-mdio";
 
 			/* These are the same PHYs as on
@@ -366,25 +359,25 @@
 			qe_phy0: ethernet-phy@07 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <7>;
+				reg = <0x7>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy1: ethernet-phy@01 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy2: ethernet-phy@02 {
 				interrupt-parent = <&mpic>;
 				interrupts = <1 1>;
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 			qe_phy3: ethernet-phy@03 {
 				interrupt-parent = <&mpic>;
 				interrupts = <2 1>;
-				reg = <3>;
+				reg = <0x3>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -394,9 +387,9 @@
 			compatible = "fsl,qe-ic";
 			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			big-endian;
-			interrupts = <2e 2 2e 2>; //high:30 low:30
+			interrupts = <46 2 46 2>; //high:30 low:30
 			interrupt-parent = <&mpic>;
 		};
 
@@ -404,30 +397,30 @@
 
 	pci0: pci@e0008000 {
 		cell-index = <0>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x12 AD18 */
-			9000 0 0 1 &mpic 5 1
-			9000 0 0 2 &mpic 6 1
-			9000 0 0 3 &mpic 7 1
-			9000 0 0 4 &mpic 4 1
+			0x9000 0x0 0x0 0x1 &mpic 0x5 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x6 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x7 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
 
 			/* IDSEL 0x13 AD19 */
-			9800 0 0 1 &mpic 6 1
-			9800 0 0 2 &mpic 7 1
-			9800 0 0 3 &mpic 4 1
-			9800 0 0 4 &mpic 5 1>;
+			0x9800 0x0 0x0 0x1 &mpic 0x6 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x7 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x5 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 e2000000 0 00800000>;
-		clock-frequency = <3f940aa>;
+		interrupts = <24 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e0008000 1000>;
+		reg = <0xe0008000 0x1000>;
 		compatible = "fsl,mpc8540-pci";
 		device_type = "pci";
 	};
@@ -435,39 +428,39 @@
 	/* PCI Express */
 	pci1: pcie@e000a000 {
 		cell-index = <2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 
 			/* IDSEL 0x0 (PEX) */
-			00000 0 0 1 &mpic 0 1
-			00000 0 0 2 &mpic 1 1
-			00000 0 0 3 &mpic 2 1
-			00000 0 0 4 &mpic 3 1>;
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
 
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 10000000
-			  01000000 0 00000000 e2800000 0 00800000>;
-		clock-frequency = <1fca055>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <33333333>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <e000a000 1000>;
+		reg = <0xe000a000 0x1000>;
 		compatible = "fsl,mpc8548-pcie";
 		device_type = "pci";
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 10000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00800000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index db37214aee37..66f27ab613a2 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -1,7 +1,7 @@
 /*
  * MPC8572 DS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 / {
 	model = "fsl,MPC8572DS";
 	compatible = "fsl,MPC8572DS";
@@ -33,11 +34,11 @@
 
 		PowerPC,8572@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -45,11 +46,11 @@
 
 		PowerPC,8572@1 {
 			device_type = "cpu";
-			reg = <1>;
-			d-cache-line-size = <20>;	// 32 bytes
-			i-cache-line-size = <20>;	// 32 bytes
-			d-cache-size = <8000>;		// L1, 32K
-			i-cache-size = <8000>;		// L1, 32K
+			reg = <0x1>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
@@ -58,38 +59,38 @@
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 00000000>;	// Filled by U-Boot
+		reg = <0x0 0x0>;	// Filled by U-Boot
 	};
 
 	soc8572@ffe00000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <00000000 ffe00000 00100000>;
-		reg = <ffe00000 00001000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
+		ranges = <0x0 0xffe00000 0x100000>;
+		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8572-memory-controller";
-			reg = <2000 1000>;
+			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		memory-controller@6000 {
 			compatible = "fsl,mpc8572-memory-controller";
-			reg = <6000 1000>;
+			reg = <0x6000 0x1000>;
 			interrupt-parent = <&mpic>;
-			interrupts = <12 2>;
+			interrupts = <18 2>;
 		};
 
 		l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
-			reg = <20000 1000>;
-			cache-line-size = <20>;	// 32 bytes
-			cache-size = <80000>;	// L2, 512K
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
 			interrupt-parent = <&mpic>;
-			interrupts = <10 2>;
+			interrupts = <16 2>;
 		};
 
 		i2c@3000 {
@@ -97,8 +98,8 @@
 			#size-cells = <0>;
 			cell-index = <0>;
 			compatible = "fsl-i2c";
-			reg = <3000 100>;
-			interrupts = <2b 2>;
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -108,8 +109,8 @@
 			#size-cells = <0>;
 			cell-index = <1>;
 			compatible = "fsl-i2c";
-			reg = <3100 100>;
-			interrupts = <2b 2>;
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
@@ -118,27 +119,27 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,gianfar-mdio";
-			reg = <24520 20>;
+			reg = <0x24520 0x20>;
 
 			phy0: ethernet-phy@0 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <0>;
+				interrupts = <10 1>;
+				reg = <0x0>;
 			};
 			phy1: ethernet-phy@1 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <1>;
+				interrupts = <10 1>;
+				reg = <0x1>;
 			};
 			phy2: ethernet-phy@2 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <2>;
+				interrupts = <10 1>;
+				reg = <0x2>;
 			};
 			phy3: ethernet-phy@3 {
 				interrupt-parent = <&mpic>;
-				interrupts = <a 1>;
-				reg = <3>;
+				interrupts = <10 1>;
+				reg = <0x3>;
 			};
 		};
 
@@ -147,9 +148,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <24000 1000>;
+			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1d 2 1e 2 22 2>;
+			interrupts = <29 2 30 2 34 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy0>;
 			phy-connection-type = "rgmii-id";
@@ -160,9 +161,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <25000 1000>;
+			reg = <0x25000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <23 2 24 2 28 2>;
+			interrupts = <35 2 36 2 40 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy1>;
 			phy-connection-type = "rgmii-id";
@@ -173,9 +174,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <26000 1000>;
+			reg = <0x26000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <1f 2 20 2 21 2>;
+			interrupts = <31 2 32 2 33 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy2>;
 			phy-connection-type = "rgmii-id";
@@ -186,9 +187,9 @@
 			device_type = "network";
 			model = "eTSEC";
 			compatible = "gianfar";
-			reg = <27000 1000>;
+			reg = <0x27000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <25 2 26 2 27 2>;
+			interrupts = <37 2 38 2 39 2>;
 			interrupt-parent = <&mpic>;
 			phy-handle = <&phy3>;
 			phy-connection-type = "rgmii-id";
@@ -198,9 +199,9 @@
 			cell-index = <0>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4500 100>;
+			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -208,15 +209,15 @@
 			cell-index = <1>;
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <4600 100>;
+			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <2a 2>;
+			interrupts = <42 2>;
 			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {	//global utilities block
 			compatible = "fsl,mpc8572-guts";
-			reg = <e0000 1000>;
+			reg = <0xe0000 0x1000>;
 			fsl,has-rstcr;
 		};
 
@@ -225,7 +226,7 @@
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
-			reg = <40000 40000>;
+			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 			big-endian;
@@ -239,167 +240,167 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <ffe08000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 80000000 80000000 0 20000000
-			  01000000 0 00000000 ffc00000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xffe08000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <18 2>;
-		interrupt-map-mask = <ff00 0 0 7>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x11 func 0 - PCI slot 1 */
-			8800 0 0 1 &mpic 2 1
-			8800 0 0 2 &mpic 3 1
-			8800 0 0 3 &mpic 4 1
-			8800 0 0 4 &mpic 1 1
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 1 - PCI slot 1 */
-			8900 0 0 1 &mpic 2 1
-			8900 0 0 2 &mpic 3 1
-			8900 0 0 3 &mpic 4 1
-			8900 0 0 4 &mpic 1 1
+			0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 2 - PCI slot 1 */
-			8a00 0 0 1 &mpic 2 1
-			8a00 0 0 2 &mpic 3 1
-			8a00 0 0 3 &mpic 4 1
-			8a00 0 0 4 &mpic 1 1
+			0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 3 - PCI slot 1 */
-			8b00 0 0 1 &mpic 2 1
-			8b00 0 0 2 &mpic 3 1
-			8b00 0 0 3 &mpic 4 1
-			8b00 0 0 4 &mpic 1 1
+			0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 4 - PCI slot 1 */
-			8c00 0 0 1 &mpic 2 1
-			8c00 0 0 2 &mpic 3 1
-			8c00 0 0 3 &mpic 4 1
-			8c00 0 0 4 &mpic 1 1
+			0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 5 - PCI slot 1 */
-			8d00 0 0 1 &mpic 2 1
-			8d00 0 0 2 &mpic 3 1
-			8d00 0 0 3 &mpic 4 1
-			8d00 0 0 4 &mpic 1 1
+			0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 6 - PCI slot 1 */
-			8e00 0 0 1 &mpic 2 1
-			8e00 0 0 2 &mpic 3 1
-			8e00 0 0 3 &mpic 4 1
-			8e00 0 0 4 &mpic 1 1
+			0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x11 func 7 - PCI slot 1 */
-			8f00 0 0 1 &mpic 2 1
-			8f00 0 0 2 &mpic 3 1
-			8f00 0 0 3 &mpic 4 1
-			8f00 0 0 4 &mpic 1 1
+			0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
 
 			/* IDSEL 0x12 func 0 - PCI slot 2 */
-			9000 0 0 1 &mpic 3 1
-			9000 0 0 2 &mpic 4 1
-			9000 0 0 3 &mpic 1 1
-			9000 0 0 4 &mpic 2 1
+			0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 1 - PCI slot 2 */
-			9100 0 0 1 &mpic 3 1
-			9100 0 0 2 &mpic 4 1
-			9100 0 0 3 &mpic 1 1
-			9100 0 0 4 &mpic 2 1
+			0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 2 - PCI slot 2 */
-			9200 0 0 1 &mpic 3 1
-			9200 0 0 2 &mpic 4 1
-			9200 0 0 3 &mpic 1 1
-			9200 0 0 4 &mpic 2 1
+			0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 3 - PCI slot 2 */
-			9300 0 0 1 &mpic 3 1
-			9300 0 0 2 &mpic 4 1
-			9300 0 0 3 &mpic 1 1
-			9300 0 0 4 &mpic 2 1
+			0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 4 - PCI slot 2 */
-			9400 0 0 1 &mpic 3 1
-			9400 0 0 2 &mpic 4 1
-			9400 0 0 3 &mpic 1 1
-			9400 0 0 4 &mpic 2 1
+			0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 5 - PCI slot 2 */
-			9500 0 0 1 &mpic 3 1
-			9500 0 0 2 &mpic 4 1
-			9500 0 0 3 &mpic 1 1
-			9500 0 0 4 &mpic 2 1
+			0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 6 - PCI slot 2 */
-			9600 0 0 1 &mpic 3 1
-			9600 0 0 2 &mpic 4 1
-			9600 0 0 3 &mpic 1 1
-			9600 0 0 4 &mpic 2 1
+			0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			/* IDSEL 0x12 func 7 - PCI slot 2 */
-			9700 0 0 1 &mpic 3 1
-			9700 0 0 2 &mpic 4 1
-			9700 0 0 3 &mpic 1 1
-			9700 0 0 4 &mpic 2 1
+			0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
+			0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
+			0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
+			0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
 
 			// IDSEL 0x1c  USB
-			e000 0 0 1 &i8259 c 2
-			e100 0 0 2 &i8259 9 2
-			e200 0 0 3 &i8259 a 2
-			e300 0 0 4 &i8259 b 2
+			0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+			0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+			0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+			0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
 
 			// IDSEL 0x1d  Audio
-			e800 0 0 1 &i8259 6 2
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
 
 			// IDSEL 0x1e Legacy
-			f000 0 0 1 &i8259 7 2
-			f100 0 0 1 &i8259 7 2
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
 
 			// IDSEL 0x1f IDE/SATA
-			f800 0 0 1 &i8259 e 2
-			f900 0 0 1 &i8259 5 2
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
 
 			>;
 
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 80000000
-				  02000000 0 80000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 			uli1575@0 {
-				reg = <0 0 0 0 0>;
+				reg = <0x0 0x0 0x0 0x0 0x0>;
 				#size-cells = <2>;
 				#address-cells = <3>;
-				ranges = <02000000 0 80000000
-					  02000000 0 80000000
-					  0 20000000
+				ranges = <0x2000000 0x0 0x80000000
+					  0x2000000 0x0 0x80000000
+					  0x0 0x20000000
 
-					  01000000 0 00000000
-					  01000000 0 00000000
-					  0 00100000>;
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x100000>;
 				isa@1e {
 					device_type = "isa";
 					#interrupt-cells = <2>;
 					#size-cells = <1>;
 					#address-cells = <2>;
-					reg = <f000 0 0 0 0>;
-					ranges = <1 0 01000000 0 0
-						  00001000>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0 0x1000000 0x0 0x0
+						  0x1000>;
 					interrupt-parent = <&i8259>;
 
 					i8259: interrupt-controller@20 {
-						reg = <1 20 2
-						       1 a0 2
-						       1 4d0 2>;
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
 						interrupt-controller;
 						device_type = "interrupt-controller";
 						#address-cells = <0>;
@@ -412,29 +413,29 @@
 					i8042@60 {
 						#size-cells = <0>;
 						#address-cells = <1>;
-						reg = <1 60 1 1 64 1>;
-						interrupts = <1 3 c 3>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
 						interrupt-parent =
 							<&i8259>;
 
 						keyboard@0 {
-							reg = <0>;
+							reg = <0x0>;
 							compatible = "pnpPNP,303";
 						};
 
 						mouse@1 {
-							reg = <1>;
+							reg = <0x1>;
 							compatible = "pnpPNP,f03";
 						};
 					};
 
 					rtc@70 {
 						compatible = "pnpPNP,b00";
-						reg = <1 70 2>;
+						reg = <0x1 0x70 0x2>;
 					};
 
 					gpio@400 {
-						reg = <1 400 80>;
+						reg = <0x1 0x400 0x80>;
 					};
 				};
 			};
@@ -449,33 +450,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <ffe09000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 a0000000 a0000000 0 20000000
-			  01000000 0 00000000 ffc10000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1a 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 4 1
-			0000 0 0 2 &mpic 5 1
-			0000 0 0 3 &mpic 6 1
-			0000 0 0 4 &mpic 7 1
+			0000 0x0 0x0 0x1 &mpic 0x4 0x1
+			0000 0x0 0x0 0x2 &mpic 0x5 0x1
+			0000 0x0 0x0 0x3 &mpic 0x6 0x1
+			0000 0x0 0x0 0x4 &mpic 0x7 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 a0000000
-				  02000000 0 a0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 		};
 	};
 
@@ -486,33 +487,33 @@
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		reg = <ffe0a000 1000>;
-		bus-range = <0 ff>;
-		ranges = <02000000 0 c0000000 c0000000 0 20000000
-			  01000000 0 00000000 ffc20000 0 00010000>;
-		clock-frequency = <1fca055>;
+		reg = <0xffe0a000 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <1b 2>;
-		interrupt-map-mask = <f800 0 0 7>;
+		interrupts = <27 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-			0000 0 0 1 &mpic 0 1
-			0000 0 0 2 &mpic 1 1
-			0000 0 0 3 &mpic 2 1
-			0000 0 0 4 &mpic 3 1
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
 			>;
 		pcie@0 {
-			reg = <0 0 0 0 0>;
+			reg = <0x0 0x0 0x0 0x0 0x0>;
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			ranges = <02000000 0 c0000000
-				  02000000 0 c0000000
-				  0 20000000
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
 
-				  01000000 0 00000000
-				  01000000 0 00000000
-				  0 00100000>;
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 79385bcd5c5f..7f9b999843ce 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -13,7 +13,7 @@
 
 / {
 	model = "MPC8641HPCN";
-	compatible = "mpc86xx";
+	compatible = "fsl,mpc8641hpcn";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index daf9433e906b..765e43c997da 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -2,6 +2,7 @@
  * MPC866 ADS Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
+ * Copyright 2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC866ADS";
@@ -22,37 +24,37 @@
 
 		PowerPC,866@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <10>;	// 16 bytes
-			i-cache-line-size = <10>;	// 16 bytes
-			d-cache-size = <2000>;		// L1, 8K
-			i-cache-size = <4000>;		// L1, 16K
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x2000>;		// L1, 8K
+			i-cache-size = <0x4000>;		// L1, 16K
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
-			interrupts = <f 2>;	// decrementer interrupt
+			interrupts = <15 2>;	// decrementer interrupt
 			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 800000>;
+		reg = <0x0 0x800000>;
 	};
 
 	localbus@ff000100 {
 		compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <ff000100 40>;
+		reg = <0xff000100 0x40>;
 
 		ranges = <
-			1 0 ff080000 00008000
-			5 0 ff0a0000 00008000
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
 		>;
 
 		board-control@1,0 {
-			reg = <1 0 20 5 300 4>;
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
 			compatible = "fsl,mpc866ads-bcsr";
 		};
 	};
@@ -61,17 +63,17 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 ff000000 00100000>;
-		reg = <ff000000 00000200>;
+		ranges = <0x0 0xff000000 0x100000>;
+		reg = <0xff000000 0x200>;
 		bus-frequency = <0>;
 
 		mdio@e00 {
 			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			PHY: ethernet-phy@f {
-				reg = <f>;
+				reg = <0xf>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -80,7 +82,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc866-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
 			interrupt-parent = <&PIC>;
@@ -91,7 +93,7 @@
 		PIC: pic@0 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0 24>;
+			reg = <0x0 0x24>;
 			compatible = "fsl,mpc866-pic", "fsl,pq1-pic";
 		};
 
@@ -100,7 +102,7 @@
 			#size-cells = <1>;
 			compatible = "fsl,mpc866-cpm", "fsl,cpm1";
 			ranges;
-			reg = <9c0 40>;
+			reg = <0x9c0 0x40>;
 			brg-frequency = <0>;
 			interrupts = <0 2>;	// cpm error interrupt
 			interrupt-parent = <&CPM_PIC>;
@@ -108,11 +110,11 @@
 			muram@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 2000 2000>;
+				ranges = <0x0 0x2000 0x2000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 1c00>;
+					reg = <0x0 0x1c00>;
 				};
 			};
 
@@ -120,7 +122,7 @@
 				compatible = "fsl,mpc866-brg",
 					     "fsl,cpm1-brg",
 					     "fsl,cpm-brg";
-				reg = <9f0 10>;
+				reg = <0x9f0 0x10>;
 				clock-frequency = <0>;
 			};
 
@@ -130,7 +132,7 @@
 				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
 				interrupt-parent = <&PIC>;
-				reg = <930 20>;
+				reg = <0x930 0x20>;
 				compatible = "fsl,mpc866-cpm-pic",
 				             "fsl,cpm1-pic";
 			};
@@ -140,31 +142,31 @@
 				device_type = "serial";
 				compatible = "fsl,mpc866-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a80 10 3e80 40>;
+				reg = <0xa80 0x10 0x3e80 0x40>;
 				interrupts = <4>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0090>;
+				fsl,cpm-command = <0x90>;
 			};
 
 			serial@a90 {
 				device_type = "serial";
 				compatible = "fsl,mpc866-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a90 10 3f80 40>;
+				reg = <0xa90 0x10 0x3f80 0x40>;
 				interrupts = <3>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <00d0>;
+				fsl,cpm-command = <0xd0>;
 			};
 
 			ethernet@a00 {
 				device_type = "network";
 				compatible = "fsl,mpc866-scc-enet",
 				             "fsl,cpm1-scc-enet";
-				reg = <a00 18 3c00 100>;
+				reg = <0xa00 0x18 0x3c00 0x100>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <1e>;
+				interrupts = <30>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-command = <0000>;
 				linux,network-index = <1>;
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index d84a012c2aaf..9895043722b9 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -2,7 +2,7 @@
  * MPC885 ADS Device Tree Source
  *
  * Copyright 2006 MontaVista Software, Inc.
- * Copyright 2007 Freescale Semiconductor, Inc.
+ * Copyright 2007,2008 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -10,6 +10,7 @@
  * option) any later version.
  */
 
+/dts-v1/;
 
 / {
 	model = "MPC885ADS";
@@ -23,45 +24,45 @@
 
 		PowerPC,885@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#16>;
-			i-cache-line-size = <d#16>;
-			d-cache-size = <d#8192>;
-			i-cache-size = <d#8192>;
+			reg = <0x0>;
+			d-cache-line-size = <16>;
+			i-cache-line-size = <16>;
+			d-cache-size = <8192>;
+			i-cache-size = <8192>;
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
-			interrupts = <f 2>;	// decrementer interrupt
+			interrupts = <15 2>;	// decrementer interrupt
 			interrupt-parent = <&PIC>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@ff000100 {
 		compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <ff000100 40>;
+		reg = <0xff000100 0x40>;
 
 		ranges = <
-			0 0 fe000000 00800000
-			1 0 ff080000 00008000
-			5 0 ff0a0000 00008000
+			0x0 0x0 0xfe000000 0x800000
+			0x1 0x0 0xff080000 0x8000
+			0x5 0x0 0xff0a0000 0x8000
 		>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 800000>;
+			reg = <0x0 0x0 0x800000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		board-control@1,0 {
-			reg = <1 0 20 5 300 4>;
+			reg = <0x1 0x0 0x20 0x5 0x300 0x4>;
 			compatible = "fsl,mpc885ads-bcsr";
 		};
 	};
@@ -71,30 +72,30 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
-		ranges = <0 ff000000 00004000>;
+		ranges = <0x0 0xff000000 0x4000>;
 		bus-frequency = <0>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <ff000000 4000>;
+		reg = <0xff000000 0x4000>;
 
 		mdio@e00 {
 			compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY0: ethernet-phy@0 {
-				reg = <0>;
+				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY1: ethernet-phy@1 {
-				reg = <1>;
+				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY2: ethernet-phy@2 {
-				reg = <2>;
+				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
 		};
@@ -103,7 +104,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <e00 188>;
+			reg = <0xe00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <3 1>;
 			interrupt-parent = <&PIC>;
@@ -115,7 +116,7 @@
 			device_type = "network";
 			compatible = "fsl,mpc885-fec-enet",
 			             "fsl,pq1-fec-enet";
-			reg = <1e00 188>;
+			reg = <0x1e00 0x188>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <7 1>;
 			interrupt-parent = <&PIC>;
@@ -126,7 +127,7 @@
 		PIC: interrupt-controller@0 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <0 24>;
+			reg = <0x0 0x24>;
 			compatible = "fsl,mpc885-pic", "fsl,pq1-pic";
 		};
 
@@ -136,29 +137,29 @@
 			#size-cells = <2>;
 			compatible = "fsl,pq-pcmcia";
 			device_type = "pcmcia";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			interrupt-parent = <&PIC>;
-			interrupts = <d 1>;
+			interrupts = <13 1>;
 		};
 
 		cpm@9c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,mpc885-cpm", "fsl,cpm1";
-			command-proc = <9c0>;
+			command-proc = <0x9c0>;
 			interrupts = <0>;	// cpm error interrupt
 			interrupt-parent = <&CPM_PIC>;
-			reg = <9c0 40>;
+			reg = <0x9c0 0x40>;
 			ranges;
 
 			muram@2000 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 2000 2000>;
+				ranges = <0x0 0x2000 0x2000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 1c00>;
+					reg = <0x0 0x1c00>;
 				};
 			};
 
@@ -167,7 +168,7 @@
 				             "fsl,cpm1-brg",
 				             "fsl,cpm-brg";
 				clock-frequency = <0>;
-				reg = <9f0 10>;
+				reg = <0x9f0 0x10>;
 			};
 
 			CPM_PIC: interrupt-controller@930 {
@@ -175,7 +176,7 @@
 				#interrupt-cells = <1>;
 				interrupts = <5 2 0 2>;
 				interrupt-parent = <&PIC>;
-				reg = <930 20>;
+				reg = <0x930 0x20>;
 				compatible = "fsl,mpc885-cpm-pic",
 				             "fsl,cpm1-pic";
 			};
@@ -184,34 +185,34 @@
 				device_type = "serial";
 				compatible = "fsl,mpc885-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a80 10 3e80 40>;
+				reg = <0xa80 0x10 0x3e80 0x40>;
 				interrupts = <4>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0090>;
+				fsl,cpm-command = <0x90>;
 			};
 
 			serial@a90 {
 				device_type = "serial";
 				compatible = "fsl,mpc885-smc-uart",
 				             "fsl,cpm1-smc-uart";
-				reg = <a90 10 3f80 40>;
+				reg = <0xa90 0x10 0x3f80 0x40>;
 				interrupts = <3>;
 				interrupt-parent = <&CPM_PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <00d0>;
+				fsl,cpm-command = <0xd0>;
 			};
 
 			ethernet@a40 {
 				device_type = "network";
 				compatible = "fsl,mpc885-scc-enet",
 				             "fsl,cpm1-scc-enet";
-				reg = <a40 18 3e00 100>;
+				reg = <0xa40 0x18 0x3e00 0x100>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
-				interrupts = <1c>;
+				interrupts = <28>;
 				interrupt-parent = <&CPM_PIC>;
 				phy-handle = <&PHY2>;
-				fsl,cpm-command = <0080>;
+				fsl,cpm-command = <0x80>;
 				linux,network-index = <2>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts
index 2d564921897a..b2d61091b36d 100644
--- a/arch/powerpc/boot/dts/pq2fads.dts
+++ b/arch/powerpc/boot/dts/pq2fads.dts
@@ -1,7 +1,7 @@
 /*
  * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip.
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -9,6 +9,8 @@
  * option) any later version.
  */
 
+/dts-v1/;
+
 / {
 	model = "pq2fads";
 	compatible = "fsl,pq2fads";
@@ -21,11 +23,11 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <d#32>;
-			i-cache-line-size = <d#32>;
-			d-cache-size = <d#16384>;
-			i-cache-size = <d#16384>;
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
 			timebase-frequency = <0>;
 			clock-frequency = <0>;
 		};
@@ -33,7 +35,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x0 0x0>;
 	};
 
 	localbus@f0010100 {
@@ -41,67 +43,67 @@
 		             "fsl,pq2-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
-		reg = <f0010100 60>;
+		reg = <0xf0010100 0x60>;
 
-		ranges = <0 0 fe000000 00800000
-		          1 0 f4500000 00008000
-		          8 0 f8200000 00008000>;
+		ranges = <0x0 0x0 0xfe000000 0x800000
+		          0x1 0x0 0xf4500000 0x8000
+		          0x8 0x0 0xf8200000 0x8000>;
 
 		flash@0,0 {
 			compatible = "jedec-flash";
-			reg = <0 0 800000>;
+			reg = <0x0 0x0 0x800000>;
 			bank-width = <4>;
 			device-width = <1>;
 		};
 
 		bcsr@1,0 {
-			reg = <1 0 20>;
+			reg = <0x1 0x0 0x20>;
 			compatible = "fsl,pq2fads-bcsr";
 		};
 
 		PCI_PIC: pic@8,0 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
-			reg = <8 0 8>;
+			reg = <0x8 0x0 0x8>;
 			compatible = "fsl,pq2ads-pci-pic";
 			interrupt-parent = <&PIC>;
-			interrupts = <18 8>;
+			interrupts = <24 8>;
 		};
 	};
 
 	pci@f0010800 {
 		device_type = "pci";
-		reg = <f0010800 10c f00101ac 8 f00101c4 8>;
+		reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
 		compatible = "fsl,mpc8280-pci", "fsl,pq2-pci";
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
-		clock-frequency = <d#66000000>;
-		interrupt-map-mask = <f800 0 0 7>;
+		clock-frequency = <66000000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 		                /* IDSEL 0x16 */
-		                 b000 0 0 1 &PCI_PIC 0
-		                 b000 0 0 2 &PCI_PIC 1
-		                 b000 0 0 3 &PCI_PIC 2
-		                 b000 0 0 4 &PCI_PIC 3
+		                 0xb000 0x0 0x0 0x1 &PCI_PIC 0
+		                 0xb000 0x0 0x0 0x2 &PCI_PIC 1
+		                 0xb000 0x0 0x0 0x3 &PCI_PIC 2
+		                 0xb000 0x0 0x0 0x4 &PCI_PIC 3
 
 		                /* IDSEL 0x17 */
-		                 b800 0 0 1 &PCI_PIC 4
-		                 b800 0 0 2 &PCI_PIC 5
-		                 b800 0 0 3 &PCI_PIC 6
-		                 b800 0 0 4 &PCI_PIC 7
+		                 0xb800 0x0 0x0 0x1 &PCI_PIC 4
+		                 0xb800 0x0 0x0 0x2 &PCI_PIC 5
+		                 0xb800 0x0 0x0 0x3 &PCI_PIC 6
+		                 0xb800 0x0 0x0 0x4 &PCI_PIC 7
 
 		                /* IDSEL 0x18 */
-		                 c000 0 0 1 &PCI_PIC 8
-		                 c000 0 0 2 &PCI_PIC 9
-		                 c000 0 0 3 &PCI_PIC a
-		                 c000 0 0 4 &PCI_PIC b>;
+		                 0xc000 0x0 0x0 0x1 &PCI_PIC 8
+		                 0xc000 0x0 0x0 0x2 &PCI_PIC 9
+		                 0xc000 0x0 0x0 0x3 &PCI_PIC 10
+		                 0xc000 0x0 0x0 0x4 &PCI_PIC 11>;
 
 		interrupt-parent = <&PIC>;
-		interrupts = <12 8>;
-		ranges = <42000000 0 80000000 80000000 0 20000000
-		          02000000 0 a0000000 a0000000 0 20000000
-		          01000000 0 00000000 f6000000 0 02000000>;
+		interrupts = <18 8>;
+		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+		          0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+		          0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>;
 	};
 
 	soc@f0000000 {
@@ -109,27 +111,27 @@
 		#size-cells = <1>;
 		device_type = "soc";
 		compatible = "fsl,mpc8280", "fsl,pq2-soc";
-		ranges = <00000000 f0000000 00053000>;
+		ranges = <0x0 0xf0000000 0x53000>;
 
 		// Temporary -- will go away once kernel uses ranges for get_immrbase().
-		reg = <f0000000 00053000>;
+		reg = <0xf0000000 0x53000>;
 
 		cpm@119c0 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <2>;
 			compatible = "fsl,mpc8280-cpm", "fsl,cpm2";
-			reg = <119c0 30>;
+			reg = <0x119c0 0x30>;
 			ranges;
 
 			muram@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				ranges = <0 0 10000>;
+				ranges = <0x0 0x0 0x10000>;
 
 				data@0 {
 					compatible = "fsl,cpm-muram-data";
-					reg = <0 2000 9800 800>;
+					reg = <0x0 0x2000 0x9800 0x800>;
 				};
 			};
 
@@ -137,53 +139,53 @@
 				compatible = "fsl,mpc8280-brg",
 				             "fsl,cpm2-brg",
 				             "fsl,cpm-brg";
-				reg = <119f0 10 115f0 10>;
+				reg = <0x119f0 0x10 0x115f0 0x10>;
 			};
 
 			serial@11a00 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a00 20 8000 100>;
-				interrupts = <28 8>;
+				reg = <0x11a00 0x20 0x8000 0x100>;
+				interrupts = <40 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <00800000>;
+				fsl,cpm-command = <0x800000>;
 			};
 
 			serial@11a20 {
 				device_type = "serial";
 				compatible = "fsl,mpc8280-scc-uart",
 				             "fsl,cpm2-scc-uart";
-				reg = <11a20 20 8100 100>;
-				interrupts = <29 8>;
+				reg = <0x11a20 0x20 0x8100 0x100>;
+				interrupts = <41 8>;
 				interrupt-parent = <&PIC>;
 				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <04a00000>;
+				fsl,cpm-command = <0x4a00000>;
 			};
 
 			ethernet@11320 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11320 20 8500 100 113b0 1>;
-				interrupts = <21 8>;
+				reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
+				interrupts = <33 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY0>;
 				linux,network-index = <0>;
-				fsl,cpm-command = <16200300>;
+				fsl,cpm-command = <0x16200300>;
 			};
 
 			ethernet@11340 {
 				device_type = "network";
 				compatible = "fsl,mpc8280-fcc-enet",
 				             "fsl,cpm2-fcc-enet";
-				reg = <11340 20 8600 100 113d0 1>;
-				interrupts = <22 8>;
+				reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
+				interrupts = <34 8>;
 				interrupt-parent = <&PIC>;
 				phy-handle = <&PHY1>;
 				linux,network-index = <1>;
-				fsl,cpm-command = <1a400300>;
+				fsl,cpm-command = <0x1a400300>;
 				local-mac-address = [00 e0 0c 00 79 01];
 			};
 
@@ -194,21 +196,21 @@
 				             "fsl,cpm2-mdio-bitbang";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <10d40 14>;
+				reg = <0x10d40 0x14>;
 				fsl,mdio-pin = <9>;
-				fsl,mdc-pin = <a>;
+				fsl,mdc-pin = <10>;
 
 				PHY0: ethernet-phy@0 {
 					interrupt-parent = <&PIC>;
-					interrupts = <19 2>;
-					reg = <0>;
+					interrupts = <25 2>;
+					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
 
 				PHY1: ethernet-phy@1 {
 					interrupt-parent = <&PIC>;
-					interrupts = <19 2>;
-					reg = <3>;
+					interrupts = <25 2>;
+					reg = <0x3>;
 					device_type = "ethernet-phy";
 				};
 			};
@@ -218,17 +220,17 @@
 				#size-cells = <0>;
 				compatible = "fsl,mpc8280-usb",
 				             "fsl,cpm2-usb";
-				reg = <11b60 18 8b00 100>;
+				reg = <0x11b60 0x18 0x8b00 0x100>;
 				interrupt-parent = <&PIC>;
-				interrupts = <b 8>;
-				fsl,cpm-command = <2e600000>;
+				interrupts = <11 8>;
+				fsl,cpm-command = <0x2e600000>;
 			};
 		};
 
 		PIC: interrupt-controller@10c00 {
 			#interrupt-cells = <2>;
 			interrupt-controller;
-			reg = <10c00 80>;
+			reg = <0x10c00 0x80>;
 			compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
index 297dfa53fe9e..1ee6ff43dd57 100644
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -11,6 +11,8 @@
  * if it can determine the exact PrPMC type.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -25,46 +27,46 @@
 		PowerPC,7447 {
 			device_type = "cpu";
 			reg = <0>;
-			clock-frequency = <2bb0b140>;	/* Default (733 MHz) */
-			bus-frequency = <7f28155>;	/* 133.333333 MHz */
-			timebase-frequency = <1fca055>;	/* 33.333333 MHz */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			clock-frequency = <733333333>;	/* Default */
+			bus-frequency = <133333333>;
+			timebase-frequency = <33333333>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 		};
 	};
 
 	memory {
 		device_type = "memory";
-		reg = <00000000 20000000>;	/* Default (512MB) */
+		reg = <0x0 0x20000000>;			/* Default (512MB) */
 	};
 
-	mv64x60@f1000000 { /* Marvell Discovery */
+	system-controller@f1000000 { /* Marvell Discovery mv64360 */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		model = "mv64360";			/* Default */
-		compatible = "marvell,mv64x60";
-		clock-frequency = <7f28155>;		/* 133.333333 MHz */
-		reg = <f1000000 00010000>;
-		virtual-reg = <f1000000>;
-		ranges = <88000000 88000000 01000000	/* PCI 0 I/O Space */
-			  80000000 80000000 08000000	/* PCI 0 MEM Space */
-			  a0000000 a0000000 04000000	/* User FLASH */
-			  00000000 f1000000 00010000	/* Bridge's regs */
-			  f2000000 f2000000 00040000>;	/* Integrated SRAM */
+		compatible = "marvell,mv64360";
+		clock-frequency = <133333333>;
+		reg = <0xf1000000 0x10000>;
+		virtual-reg = <0xf1000000>;
+		ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
+			  0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
+			  0xa0000000 0xa0000000 0x4000000 /* User FLASH */
+			  0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
+			  0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
 
 		flash@a0000000 {
 			device_type = "rom";
 			compatible = "direct-mapped";
-			reg = <a0000000 4000000>; /* Default (64MB) */
+			reg = <0xa0000000 0x4000000>; /* Default (64MB) */
 			probe-type = "CFI";
 			bank-width = <4>;
-			partitions = <00000000 00100000 /* RO */
-				      00100000 00040001 /* RW */
-				      00140000 00400000 /* RO */
-				      00540000 039c0000 /* RO */
-				      03f00000 00100000>; /* RO */
+			partitions = <0x00000000 0x00100000 /* RO */
+				      0x00100000 0x00040001 /* RW */
+				      0x00140000 0x00400000 /* RO */
+				      0x00540000 0x039c0000 /* RO */
+				      0x03f00000 0x00100000>; /* RO */
 			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
 		};
 
@@ -72,171 +74,153 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			device_type = "mdio";
-			compatible = "marvell,mv64x60-mdio";
-			ethernet-phy@1 {
+			compatible = "marvell,mv64360-mdio";
+			PHY0: ethernet-phy@1 {
 				device_type = "ethernet-phy";
 				compatible = "broadcom,bcm5421";
-				interrupts = <4c>;	/* GPP 12 */
-				interrupt-parent = <&/mv64x60/pic>;
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
 				reg = <1>;
 			};
-			ethernet-phy@3 {
+			PHY1: ethernet-phy@3 {
 				device_type = "ethernet-phy";
 				compatible = "broadcom,bcm5421";
-				interrupts = <4c>;	/* GPP 12 */
-				interrupt-parent = <&/mv64x60/pic>;
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
 				reg = <3>;
 			};
 		};
 
-		ethernet@2000 {
-			reg = <2000 2000>;
-			eth0 {
+		ethernet-group@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-eth-group";
+			reg = <0x2000 0x2000>;
+			ethernet@0 {
 				device_type = "network";
-				compatible = "marvell,mv64x60-eth";
-				block-index = <0>;
-				interrupts = <20>;
-				interrupt-parent = <&/mv64x60/pic>;
-				phy = <&/mv64x60/mdio/ethernet-phy@1>;
+				compatible = "marvell,mv64360-eth";
+				reg = <0>;
+				interrupts = <32>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY0>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
 			};
-			eth1 {
+			ethernet@1 {
 				device_type = "network";
-				compatible = "marvell,mv64x60-eth";
-				block-index = <1>;
-				interrupts = <21>;
-				interrupt-parent = <&/mv64x60/pic>;
-				phy = <&/mv64x60/mdio/ethernet-phy@3>;
+				compatible = "marvell,mv64360-eth";
+				reg = <1>;
+				interrupts = <33>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY1>;
 				local-mac-address = [ 00 00 00 00 00 00 ];
 			};
 		};
 
-		sdma@4000 {
-			device_type = "dma";
-			compatible = "marvell,mv64x60-sdma";
-			reg = <4000 c18>;
-			virtual-reg = <f1004000>;
-			interrupt-base = <0>;
-			interrupts = <24>;
-			interrupt-parent = <&/mv64x60/pic>;
+		SDMA0: sdma@4000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x4000 0xc18>;
+			virtual-reg = <0xf1004000>;
+			interrupts = <36>;
+			interrupt-parent = <&PIC>;
 		};
 
-		sdma@6000 {
-			device_type = "dma";
-			compatible = "marvell,mv64x60-sdma";
-			reg = <6000 c18>;
-			virtual-reg = <f1006000>;
-			interrupt-base = <0>;
-			interrupts = <26>;
-			interrupt-parent = <&/mv64x60/pic>;
+		SDMA1: sdma@6000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x6000 0xc18>;
+			virtual-reg = <0xf1006000>;
+			interrupts = <38>;
+			interrupt-parent = <&PIC>;
 		};
 
-		brg@b200 {
-			compatible = "marvell,mv64x60-brg";
-			reg = <b200 8>;
+		BRG0: brg@b200 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb200 0x8>;
 			clock-src = <8>;
-			clock-frequency = <7ed6b40>;
-			current-speed = <2580>;
-			bcr = <0>;
+			clock-frequency = <133333333>;
+			current-speed = <9600>;
 		};
 
-		brg@b208 {
-			compatible = "marvell,mv64x60-brg";
-			reg = <b208 8>;
+		BRG1: brg@b208 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb208 0x8>;
 			clock-src = <8>;
-			clock-frequency = <7ed6b40>;
-			current-speed = <2580>;
-			bcr = <0>;
+			clock-frequency = <133333333>;
+			current-speed = <9600>;
 		};
 
-		cunit@f200 {
-			reg = <f200 200>;
+		CUNIT: cunit@f200 {
+			reg = <0xf200 0x200>;
 		};
 
-		mpscrouting@b400 {
-			reg = <b400 c>;
+		MPSCROUTING: mpscrouting@b400 {
+			reg = <0xb400 0xc>;
 		};
 
-		mpscintr@b800 {
-			reg = <b800 100>;
-			virtual-reg = <f100b800>;
+		MPSCINTR: mpscintr@b800 {
+			reg = <0xb800 0x100>;
+			virtual-reg = <0xf100b800>;
 		};
 
-		mpsc@8000 {
+		MPSC0: mpsc@8000 {
 			device_type = "serial";
-			compatible = "marvell,mpsc";
-			reg = <8000 38>;
-			virtual-reg = <f1008000>;
-			sdma = <&/mv64x60/sdma@4000>;
-			brg = <&/mv64x60/brg@b200>;
-			cunit = <&/mv64x60/cunit@f200>;
-			mpscrouting = <&/mv64x60/mpscrouting@b400>;
-			mpscintr = <&/mv64x60/mpscintr@b800>;
-			block-index = <0>;
-			max_idle = <28>;
-			chr_1 = <0>;
-			chr_2 = <0>;
-			chr_10 = <3>;
-			mpcr = <0>;
-			interrupts = <28>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x8000 0x38>;
+			virtual-reg = <0xf1008000>;
+			sdma = <&SDMA0>;
+			brg = <&BRG0>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <0>;
+			interrupts = <40>;
+			interrupt-parent = <&PIC>;
 		};
 
-		mpsc@9000 {
+		MPSC1: mpsc@9000 {
 			device_type = "serial";
-			compatible = "marvell,mpsc";
-			reg = <9000 38>;
-			virtual-reg = <f1009000>;
-			sdma = <&/mv64x60/sdma@6000>;
-			brg = <&/mv64x60/brg@b208>;
-			cunit = <&/mv64x60/cunit@f200>;
-			mpscrouting = <&/mv64x60/mpscrouting@b400>;
-			mpscintr = <&/mv64x60/mpscintr@b800>;
-			block-index = <1>;
-			max_idle = <28>;
-			chr_1 = <0>;
-			chr_2 = <0>;
-			chr_10 = <3>;
-			mpcr = <0>;
-			interrupts = <2a>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x9000 0x38>;
+			virtual-reg = <0xf1009000>;
+			sdma = <&SDMA1>;
+			brg = <&BRG1>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <1>;
+			interrupts = <42>;
+			interrupt-parent = <&PIC>;
 		};
 
 		wdt@b410 {			/* watchdog timer */
-			compatible = "marvell,mv64x60-wdt";
-			reg = <b410 8>;
-			timeout = <a>;		/* wdt timeout in seconds */
+			compatible = "marvell,mv64360-wdt";
+			reg = <0xb410 0x8>;
 		};
 
 		i2c@c000 {
 			device_type = "i2c";
-			compatible = "marvell,mv64x60-i2c";
-			reg = <c000 20>;
-			virtual-reg = <f100c000>;
-			freq_m = <8>;
-			freq_n = <3>;
-			timeout = <3e8>;		/* 1000 = 1 second */
-			retries = <1>;
-			interrupts = <25>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-i2c";
+			reg = <0xc000 0x20>;
+			virtual-reg = <0xf100c000>;
+			interrupts = <37>;
+			interrupt-parent = <&PIC>;
 		};
 
-		pic {
+		PIC: pic {
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
-			compatible = "marvell,mv64x60-pic";
-			reg = <0000 88>;
+			compatible = "marvell,mv64360-pic";
+			reg = <0x0 0x88>;
 			interrupt-controller;
 		};
 
 		mpp@f000 {
-			compatible = "marvell,mv64x60-mpp";
-			reg = <f000 10>;
+			compatible = "marvell,mv64360-mpp";
+			reg = <0xf000 0x10>;
 		};
 
 		gpp@f100 {
-			compatible = "marvell,mv64x60-gpp";
-			reg = <f100 20>;
+			compatible = "marvell,mv64360-gpp";
+			reg = <0xf100 0x20>;
 		};
 
 		pci@80000000 {
@@ -244,73 +228,75 @@
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			device_type = "pci";
-			compatible = "marvell,mv64x60-pci";
-			reg = <0cf8 8>;
-			ranges = <01000000 0        0 88000000 0 01000000
-				  02000000 0 80000000 80000000 0 08000000>;
-			bus-range = <0 ff>;
-			clock-frequency = <3EF1480>;
-			interrupt-pci-iack = <0c34>;
-			interrupt-parent = <&/mv64x60/pic>;
-			interrupt-map-mask = <f800 0 0 7>;
+			compatible = "marvell,mv64360-pci";
+			reg = <0xcf8 0x8>;
+			ranges = <0x01000000 0x0        0x0
+					0x88000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000
+				  	0x80000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0xc34>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 0x0a */
-				5000 0 0 1 &/mv64x60/pic 50
-				5000 0 0 2 &/mv64x60/pic 51
-				5000 0 0 3 &/mv64x60/pic 5b
-				5000 0 0 4 &/mv64x60/pic 5d
+				0x5000 0 0 1 &PIC 80
+				0x5000 0 0 2 &PIC 81
+				0x5000 0 0 3 &PIC 91
+				0x5000 0 0 4 &PIC 93
 
 				/* IDSEL 0x0b */
-				5800 0 0 1 &/mv64x60/pic 5b
-				5800 0 0 2 &/mv64x60/pic 5d
-				5800 0 0 3 &/mv64x60/pic 50
-				5800 0 0 4 &/mv64x60/pic 51
+				0x5800 0 0 1 &PIC 91
+				0x5800 0 0 2 &PIC 93
+				0x5800 0 0 3 &PIC 80
+				0x5800 0 0 4 &PIC 81
 
 				/* IDSEL 0x0c */
-				6000 0 0 1 &/mv64x60/pic 5b
-				6000 0 0 2 &/mv64x60/pic 5d
-				6000 0 0 3 &/mv64x60/pic 50
-				6000 0 0 4 &/mv64x60/pic 51
+				0x6000 0 0 1 &PIC 91
+				0x6000 0 0 2 &PIC 93
+				0x6000 0 0 3 &PIC 80
+				0x6000 0 0 4 &PIC 81
 
 				/* IDSEL 0x0d */
-				6800 0 0 1 &/mv64x60/pic 5d
-				6800 0 0 2 &/mv64x60/pic 50
-				6800 0 0 3 &/mv64x60/pic 51
-				6800 0 0 4 &/mv64x60/pic 5b
+				0x6800 0 0 1 &PIC 93
+				0x6800 0 0 2 &PIC 80
+				0x6800 0 0 3 &PIC 81
+				0x6800 0 0 4 &PIC 91
 			>;
 		};
 
 		cpu-error@0070 {
-			compatible = "marvell,mv64x60-cpu-error";
-			reg = <0070 10 0128 28>;
-			interrupts = <03>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-cpu-error";
+			reg = <0x70 0x10 0x128 0x28>;
+			interrupts = <3>;
+			interrupt-parent = <&PIC>;
 		};
 
 		sram-ctrl@0380 {
-			compatible = "marvell,mv64x60-sram-ctrl";
-			reg = <0380 80>;
-			interrupts = <0d>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-sram-ctrl";
+			reg = <0x380 0x80>;
+			interrupts = <13>;
+			interrupt-parent = <&PIC>;
 		};
 
 		pci-error@1d40 {
-			compatible = "marvell,mv64x60-pci-error";
-			reg = <1d40 40 0c28 4>;
-			interrupts = <0c>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1d40 0x40 0xc28 0x4>;
+			interrupts = <12>;
+			interrupt-parent = <&PIC>;
 		};
 
 		mem-ctrl@1400 {
-			compatible = "marvell,mv64x60-mem-ctrl";
-			reg = <1400 60>;
-			interrupts = <11>;
-			interrupt-parent = <&/mv64x60/pic>;
+			compatible = "marvell,mv64360-mem-ctrl";
+			reg = <0x1400 0x60>;
+			interrupts = <17>;
+			interrupt-parent = <&PIC>;
 		};
 	};
 
 	chosen {
 		bootargs = "ip=on";
-		linux,stdout-path = "/mv64x60@f1000000/mpsc@8000";
+		linux,stdout-path = &MPSC0;
 	};
 };
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index f947c75a2e94..6a8fa7089ea2 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -254,7 +254,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
@@ -270,7 +269,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -284,7 +283,6 @@
 			};
 
 			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
@@ -300,7 +298,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 14be38ad5d4b..b86e65d926c1 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -184,11 +184,17 @@
 		cell-index = <0>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
-			/* IDSEL 0x01 (PCI-X slot) */
-			0x0800 0x0 0x0 0x1 &mpic 0x0 0x1
-			0x0800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x0800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x0800 0x0 0x0 0x4 &mpic 0x3 0x1>;
+			/* IDSEL 0x01 (PCI-X slot) @66MHz */
+			0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
+			0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <0x18 0x2>;
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
new file mode 100644
index 000000000000..3eebeec157b3
--- /dev/null
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -0,0 +1,352 @@
+/*
+ * SBC8641D Device Tree Source
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "SBC8641D";
+	compatible = "wind,sbc8641";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8641@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;		// L1
+			i-cache-size = <32768>;		// L1
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+		PowerPC,8641@1 {
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// From uboot
+			bus-frequency = <0>;		// From uboot
+			clock-frequency = <0>;		// From uboot
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;	// 512M at 0x0
+	};
+
+	localbus@f8005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8641-localbus", "simple-bus";
+		reg = <0xf8005000 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0 0 0xff000000 0x01000000	// 16MB Boot flash
+			  1 0 0xf0000000 0x00010000	// 64KB EEPROM
+			  2 0 0xf1000000 0x00100000	// EPLD (1MB)
+			  3 0 0xe0000000 0x04000000	// 64MB LB SDRAM (CS3)
+			  4 0 0xe4000000 0x04000000	// 64MB LB SDRAM (CS4)
+			  6 0 0xf4000000 0x00100000	// LCD display (1MB)
+			  7 0 0xe8000000 0x04000000>;	// 64MB OneNAND
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x01000000>;
+			bank-width = <2>;
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "dtb";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@300000 {
+				label = "kernel";
+				reg = <0x00100000 0x00400000>;
+				read-only;
+			};
+			partition@400000 {
+				label = "fs";
+				reg = <0x00500000 0x00a00000>;
+			};
+			partition@700000 {
+				label = "firmware";
+				reg = <0x00f00000 0x00100000>;
+				read-only;
+			};
+		};
+
+		epld@2,0 {
+			compatible = "wrs,epld-localbus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			reg = <2 0 0x100000>;
+			ranges = <0 0 5 0 1	// User switches
+				  1 0 5 1 1	// Board ID/Rev
+				  3 0 5 3 1>;	// LEDs
+		};
+	};
+
+	soc@f8000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x00000000 0xf8000000 0x00100000>;
+		reg = <0xf8000000 0x00001000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@1f {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <0x1f>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@2 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30  2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <28 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8641-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+	};
+
+	pci0: pcie@f8008000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf8008000 0x1000>;
+		bus-range = <0x0 0xff>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xff00 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 0 1
+			0x0000 0 0 2 &mpic 1 1
+			0x0000 0 0 3 &mpic 2 1
+			0x0000 0 0 4 &mpic 3 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0x80000000
+				  0x02000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+
+	};
+
+	pci1: pcie@f8009000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8641-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xf8009000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0x0000 0 0 1 &mpic 4 1
+			0x0000 0 0 2 &mpic 5 1
+			0x0000 0 0 3 &mpic 6 1
+			0x0000 0 0 4 &mpic 7 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0x0 0xa0000000
+				  0x02000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x01000000 0x0 0x00000000
+				  0x01000000 0x0 0x00000000
+				  0x0 0x00100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 8db9515d7dc3..a1ae4d6ec990 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -269,7 +269,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
@@ -285,7 +284,7 @@
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -299,7 +298,6 @@
 			};
 
 			EMAC1: ethernet@ef600f00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
@@ -315,7 +313,7 @@
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index 8278068c802c..e808e1c5593a 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -104,6 +104,16 @@
 		// FIXME: anything else?
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
+		dcr-reg = <20 8			/* Internal SRAM DCR's */
+			   30 8>;		/* L2 cache DCR's */
+		cache-line-size = <20>;		/* 32 bytes */
+		cache-size = <40000>;		/* L2, 256K */
+		interrupt-parent = <&UIC2>;
+		interrupts = <17 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb-440gx", "ibm,plb4";
 		#address-cells = <2>;
@@ -232,10 +242,18 @@
 				reg = <40000790 8>;
 			};
 
+			TAH0: emac-tah@40000b50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <40000b50 30>;
+			};
+
+			TAH1: emac-tah@40000d50 {
+				compatible = "ibm,tah-440gx", "ibm,tah";
+				reg = <40000d50 30>;
+			};
 
 			EMAC0: ethernet@40000800 {
 				unused = <1>;
-				linux,network-index = <2>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
@@ -256,7 +274,6 @@
 			};
 		 	EMAC1: ethernet@40000900 {
 				unused = <1>;
-				linux,network-index = <3>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
@@ -277,7 +294,6 @@
 			};
 
 		 	EMAC2: ethernet@40000c00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
@@ -288,7 +304,7 @@
 				mal-tx-channel = <2>;
 				mal-rx-channel = <2>;
 				cell-index = <2>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -297,10 +313,11 @@
 				rgmii-channel = <0>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <2>;
+				tah-device = <&TAH0>;
+				tah-channel = <0>;
 			};
 
 		 	EMAC3: ethernet@40000e00 {
-				linux,network-index = <1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
@@ -311,7 +328,7 @@
 				mal-tx-channel = <3>;
 				mal-rx-channel = <3>;
 				cell-index = <3>;
-				max-frame-size = <5dc>;
+				max-frame-size = <2328>;
 				rx-fifo-size = <1000>;
 				tx-fifo-size = <800>;
 				phy-mode = "rgmii";
@@ -320,6 +337,8 @@
 				rgmii-channel = <1>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <3>;
+				tah-device = <&TAH1>;
+				tah-channel = <0>;
 			};
 
 
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index c86464f007da..65bcea6a0173 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -127,10 +127,25 @@
 		ethernet@3000 {
 			device_type = "network";
 			compatible = "fsl,mpc5200-fec";
-			reg = <3000 800>;
+			reg = <3000 400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
 			interrupt-parent = <&mpc5200_pic>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <3000 400>;       // fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+			interrupt-parent = <&mpc5200_pic>;
+
+			phy0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				reg = <0>;
+			};
 		};
 
 		ata@3a00 {
@@ -141,11 +156,19 @@
 		};
 
 		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			compatible = "fsl,mpc5200-i2c","fsl-i2c";
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
+
+			 rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1307";
+				reg = <68>;
+			};
 		};
 
 		sram@8000 {
@@ -154,6 +177,23 @@
 		};
 	};
 
+	lpb {
+		model = "fsl,lpb";
+		compatible = "fsl,lpb";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 fc000000 02000000>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 02000000>;
+			bank-width = <4>;
+			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+	};
+
 	pci@f0000d00 {
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index dcc21b0438e5..a328607c8f84 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -125,7 +125,6 @@
 			};
 
 			EMAC: ethernet@ef600800 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index dc1499d30f43..b04a52e22bf5 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -204,7 +204,6 @@
 			};
 
 			EMAC0: ethernet@ef600e00 {
-				linux,network-index = <0>;
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
new file mode 100644
index 000000000000..0d6d332814e0
--- /dev/null
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -0,0 +1,304 @@
+/*
+ * Device Tree Source for AMCC Yosemite
+ *
+ * Copyright 2008 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "amcc,yosemite";
+	compatible = "amcc,yosemite","amcc,bamboo";
+	dcr-parent = <&/cpus/cpu@0>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <20>;
+			d-cache-line-size = <20>;
+			i-cache-size = <8000>;
+			d-cache-size = <8000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0c0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0d0 009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <00e 002>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <00c 002>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <100 027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <180 62>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
+					/*RXEOB*/ 1 &UIC0 b 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+			ranges = <00000000 0 00000000 80000000
+			          80000000 0 80000000 80000000>;
+			interrupt-parent = <&UIC1>;
+			interrupts = <7 4>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600300 8>;
+				virtual-reg = <ef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <1c200>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0 4>;
+			};
+
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600400 8>;
+				virtual-reg = <ef600400>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <1 4>;
+			};
+
+			UART2: serial@ef600500 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600500 8>;
+				virtual-reg = <ef600500>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <3 4>;
+				status = "disabled";
+			};
+
+			UART3: serial@ef600600 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <ef600600 8>;
+				virtual-reg = <ef600600>;
+				clock-frequency = <0>;
+				current-speed = <0>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <4 4>;
+				status = "disabled";
+			};
+
+			IIC0: i2c@ef600700 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <ef600700 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				reg = <ef600800 14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			spi@ef600900 {
+				compatible = "amcc,spi-440ep";
+				reg = <ef600900 6>;
+				interrupts = <8 4>;
+				interrupt-parent = <&UIC0>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <ef600d00 c>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <1c 4 1d 4>;
+				reg = <ef600e00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <1e 4 1f 4>;
+				reg = <ef600f00 70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <5dc>;
+				rx-fifo-size = <1000>;
+				tx-fifo-size = <800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <ef601000 80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = < &UIC1 >;
+			};
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 eec00000 8	/* Config space access */
+			       0 eed00000 4	/* IACK */
+			       0 eed00000 4	/* Special cycle */
+			       0 ef400000 40>;	/* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
+				  01000000 0 00000000 0 e8000000 0 00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+
+			/* Bamboo has all 4 IRQ pins tied together per slot */
+			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map = <
+				/* IDSEL 1 */
+				0800 0 0 0 &UIC0 1c 8
+
+				/* IDSEL 2 */
+				1000 0 0 0 &UIC0 1b 8
+
+				/* IDSEL 3 */
+				1800 0 0 0 &UIC0 1a 8
+
+				/* IDSEL 4 */
+				2000 0 0 0 &UIC0 19 8
+			>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c
index f61364c47a76..5532ab3221dd 100644
--- a/arch/powerpc/boot/ebony.c
+++ b/arch/powerpc/boot/ebony.c
@@ -75,7 +75,8 @@ static void ebony_fixups(void)
 
 	ibm440gp_fixup_clocks(sysclk, 6 * 1843200);
 	ibm4xx_sdram_fixup_memsize();
-	dt_fixup_mac_addresses(ebony_mac0, ebony_mac1);
+	dt_fixup_mac_address_by_alias("ethernet0", ebony_mac0);
+	dt_fixup_mac_address_by_alias("ethernet1", ebony_mac1);
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	ebony_flashsel_fixup();
 }
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index 59016bef1391..c541fd8a95d4 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -35,7 +35,7 @@
 #define check_err(err) \
 	({ \
 		if (BAD_ERROR(err) || ((err < 0) && DEBUG)) \
-			printf("%s():%d  %s\n\r", __FUNCTION__, __LINE__, \
+			printf("%s():%d  %s\n\r", __func__, __LINE__, \
 			       fdt_strerror(err)); \
 		if (BAD_ERROR(err)) \
 			exit(); \
diff --git a/arch/powerpc/boot/mpc52xx-psc.c b/arch/powerpc/boot/mpc52xx-psc.c
index 1074626e6a37..d4cb4e4e0938 100644
--- a/arch/powerpc/boot/mpc52xx-psc.c
+++ b/arch/powerpc/boot/mpc52xx-psc.c
@@ -51,14 +51,9 @@ static unsigned char psc_getc(void)
 
 int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp)
 {
-	int n;
-
 	/* Get the base address of the psc registers */
-	n = getprop(devp, "virtual-reg", &psc, sizeof(psc));
-	if (n != sizeof(psc)) {
-		if (!dt_xlate_reg(devp, 0, (void *)&psc, NULL))
-			return -1;
-	}
+	if (dt_get_virtual_reg(devp, &psc, 1) < 1)
+		return -1;
 
 	scdp->open = psc_open;
 	scdp->putc = psc_putc;
diff --git a/arch/powerpc/boot/mpsc.c b/arch/powerpc/boot/mpsc.c
index 802ea53790d8..425ad88cce8d 100644
--- a/arch/powerpc/boot/mpsc.c
+++ b/arch/powerpc/boot/mpsc.c
@@ -141,7 +141,7 @@ int mpsc_console_init(void *devp, struct serial_console_data *scdp)
 	if (mpscintr_base == NULL)
 		goto err_out;
 
-	n = getprop(devp, "block-index", &v, sizeof(v));
+	n = getprop(devp, "cell-index", &v, sizeof(v));
 	if (n != sizeof(v))
 		goto err_out;
 	reg_set = (int)v;
diff --git a/arch/powerpc/boot/mv64x60.c b/arch/powerpc/boot/mv64x60.c
index b43259455d4b..d9bb302b91d2 100644
--- a/arch/powerpc/boot/mv64x60.c
+++ b/arch/powerpc/boot/mv64x60.c
@@ -535,7 +535,7 @@ u8 *mv64x60_get_bridge_pbase(void)
 	u32 v[2];
 	void *devp;
 
-	devp = finddevice("/mv64x60");
+	devp = find_node_by_compatible(NULL, "marvell,mv64360");
 	if (devp == NULL)
 		goto err_out;
 	if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
@@ -553,7 +553,7 @@ u8 *mv64x60_get_bridge_base(void)
 	u32 v;
 	void *devp;
 
-	devp = finddevice("/mv64x60");
+	devp = find_node_by_compatible(NULL, "marvell,mv64360");
 	if (devp == NULL)
 		goto err_out;
 	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
diff --git a/arch/powerpc/boot/mv64x60_i2c.c b/arch/powerpc/boot/mv64x60_i2c.c
index d085377be3bc..52a3212b6638 100644
--- a/arch/powerpc/boot/mv64x60_i2c.c
+++ b/arch/powerpc/boot/mv64x60_i2c.c
@@ -185,7 +185,7 @@ int mv64x60_i2c_open(void)
 	u32 v;
 	void *devp;
 
-	devp = finddevice("/mv64x60/i2c");
+	devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
 	if (devp == NULL)
 		goto err_out;
 	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c
index f8f1b2f31412..aef3bdc89160 100644
--- a/arch/powerpc/boot/ns16550.c
+++ b/arch/powerpc/boot/ns16550.c
@@ -55,15 +55,9 @@ static u8 ns16550_tstc(void)
 int ns16550_console_init(void *devp, struct serial_console_data *scdp)
 {
 	int n;
-	unsigned long reg_phys;
 
-	n = getprop(devp, "virtual-reg", &reg_base, sizeof(reg_base));
-	if (n != sizeof(reg_base)) {
-		if (!dt_xlate_reg(devp, 0, &reg_phys, NULL))
-			return -1;
-
-		reg_base = (void *)reg_phys;
-	}
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+		return -1;
 
 	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
 	if (n != sizeof(reg_shift))
diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h
index 4b0544b03c64..321e2f5afe71 100644
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@@ -95,6 +95,7 @@ int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size);
 int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr);
 int dt_is_compatible(void *node, const char *compat);
 void dt_get_reg_format(void *node, u32 *naddr, u32 *nsize);
+int dt_get_virtual_reg(void *node, void **addr, int nres);
 
 static inline void *finddevice(const char *name)
 {
diff --git a/arch/powerpc/boot/prpmc2800.c b/arch/powerpc/boot/prpmc2800.c
index 05c3245b30d7..da31d6030482 100644
--- a/arch/powerpc/boot/prpmc2800.c
+++ b/arch/powerpc/boot/prpmc2800.c
@@ -344,20 +344,20 @@ static void prpmc2800_bridge_setup(u32 mem_size)
 			acc_bits);
 
 	/* Get the cpu -> pci i/o & mem mappings from the device tree */
-	devp = finddevice("/mv64x60/pci@80000000");
+	devp = find_node_by_compatible(NULL, "marvell,mv64360-pci");
 	if (devp == NULL)
-		fatal("Error: Missing /mv64x60/pci@80000000"
+		fatal("Error: Missing marvell,mv64360-pci"
 				" device tree node\n\r");
 
 	rc = getprop(devp, "ranges", v, sizeof(v));
 	if (rc != sizeof(v))
-		fatal("Error: Can't find /mv64x60/pci@80000000/ranges"
+		fatal("Error: Can't find marvell,mv64360-pci ranges"
 				" property\n\r");
 
 	/* Get the cpu -> pci i/o & mem mappings from the device tree */
-	devp = finddevice("/mv64x60");
+	devp = find_node_by_compatible(NULL, "marvell,mv64360");
 	if (devp == NULL)
-		fatal("Error: Missing /mv64x60 device tree node\n\r");
+		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
 
 	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
 	enables |= 0x0007fe00; /* Disable all cpu->pci windows */
@@ -429,9 +429,9 @@ static void prpmc2800_fixups(void)
 	setprop(devp, "model", model, l);
 
 	/* Set /cpus/PowerPC,7447/clock-frequency */
-	devp = finddevice("/cpus/PowerPC,7447");
+	devp = find_node_by_prop_value_str(NULL, "device_type", "cpu");
 	if (devp == NULL)
-		fatal("Error: Missing proper /cpus device tree node\n\r");
+		fatal("Error: Missing proper cpu device tree node\n\r");
 	v[0] = bip->core_speed;
 	setprop(devp, "clock-frequency", &v[0], sizeof(v[0]));
 
@@ -443,16 +443,17 @@ static void prpmc2800_fixups(void)
 	v[1] = bip->mem_size;
 	setprop(devp, "reg", v, sizeof(v));
 
-	/* Update /mv64x60/model, if this is a mv64362 */
+	/* Update model, if this is a mv64362 */
 	if (bip->bridge_type == BRIDGE_TYPE_MV64362) {
-		devp = finddevice("/mv64x60");
+		devp = find_node_by_compatible(NULL, "marvell,mv64360");
 		if (devp == NULL)
-			fatal("Error: Missing /mv64x60 device tree node\n\r");
+			fatal("Error: Missing marvell,mv64360"
+					" device tree node\n\r");
 		setprop(devp, "model", "mv64362", strlen("mv64362") + 1);
 	}
 
 	/* Set User FLASH size */
-	devp = finddevice("/mv64x60/flash@a0000000");
+	devp = find_node_by_compatible(NULL, "direct-mapped");
 	if (devp == NULL)
 		fatal("Error: Missing User FLASH device tree node\n\r");
 	rc = getprop(devp, "reg", v, sizeof(v));
diff --git a/arch/powerpc/boot/ps3-head.S b/arch/powerpc/boot/ps3-head.S
index a55c2735f759..b6fcbaf5027b 100644
--- a/arch/powerpc/boot/ps3-head.S
+++ b/arch/powerpc/boot/ps3-head.S
@@ -27,8 +27,9 @@
 /*
  * __system_reset_overlay - The PS3 first stage entry.
  *
- * The bootwraper build script copies the 0x100 bytes at symbol
- * __system_reset_overlay to offset 0x100 of the rom image.
+ * The bootwraper build script copies the 512 bytes at symbol
+ * __system_reset_overlay to offset 0x100 of the rom image.  This symbol
+ * must occupy 512 or less bytes.
  *
  * The PS3 has a single processor with two threads.
  */
@@ -47,8 +48,6 @@ __system_reset_overlay:
 
 	mfspr	r3, 0x88
 	cntlzw.	r3, r3
-	li	r4, 0
-	li	r5, 0
 	beq	1f
 
 	/* Secondary goes to __secondary_hold in kernel. */
@@ -57,8 +56,14 @@ __system_reset_overlay:
 	mtctr	r4
 	bctr
 
-	/* Primary delays then goes to _zimage_start in wrapper. */
 1:
+	/* Save the value at addr zero for a null pointer write check later. */
+
+	li	r4, 0
+	lwz	r3, 0(r4)
+
+	/* Primary delays then goes to _zimage_start in wrapper. */
+
 	or	31, 31, 31 /* db16cyc */
 	or	31, 31, 31 /* db16cyc */
 
@@ -67,16 +72,18 @@ __system_reset_overlay:
 	mtctr	r4
 	bctr
 
+	. = __system_reset_overlay + 512
+
 /*
  * __system_reset_kernel - Place holder for the kernel reset vector.
  *
- * The bootwrapper build script copies 0x100 bytes from offset 0x100
+ * The bootwrapper build script copies 512 bytes from offset 0x100
  * of the rom image to the symbol __system_reset_kernel.  At runtime
- * the bootwrapper program copies the 0x100 bytes at __system_reset_kernel
- * to ram address 0x100.  This symbol must occupy 0x100 bytes.
+ * the bootwrapper program copies the 512 bytes at __system_reset_kernel
+ * to ram address 0x100.  This symbol must occupy 512 bytes.
  */
 
 	.globl __system_reset_kernel
 __system_reset_kernel:
 
-	. = __system_reset_kernel + 0x100
+	. = __system_reset_kernel + 512
diff --git a/arch/powerpc/boot/ps3.c b/arch/powerpc/boot/ps3.c
index 3b0ac4d006ec..9954d98871d0 100644
--- a/arch/powerpc/boot/ps3.c
+++ b/arch/powerpc/boot/ps3.c
@@ -27,10 +27,10 @@
 #include "page.h"
 #include "ops.h"
 
-extern s64 lv1_panic(u64 in_1);
-extern s64 lv1_get_logical_partition_id(u64 *out_1);
-extern s64 lv1_get_logical_ppe_id(u64 *out_1);
-extern s64 lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
+extern int lv1_panic(u64 in_1);
+extern int lv1_get_logical_partition_id(u64 *out_1);
+extern int lv1_get_logical_ppe_id(u64 *out_1);
+extern int lv1_get_repository_node_value(u64 in_1, u64 in_2, u64 in_3,
 	u64 in_4, u64 in_5, u64 *out_1, u64 *out_2);
 
 #ifdef DEBUG
@@ -46,6 +46,7 @@ BSS_STACK(4096);
  * edit the command line passed to vmlinux (by setting /chosen/bootargs).
  * The buffer is put in it's own section so that tools may locate it easier.
  */
+
 static char cmdline[COMMAND_LINE_SIZE]
 	__attribute__((__section__("__builtin_cmdline")));
 
@@ -75,7 +76,7 @@ static void ps3_exit(void)
 
 static int ps3_repository_read_rm_size(u64 *rm_size)
 {
-	s64 result;
+	int result;
 	u64 lpar_id;
 	u64 ppe_id;
 	u64 v2;
@@ -114,16 +115,17 @@ void ps3_copy_vectors(void)
 {
 	extern char __system_reset_kernel[];
 
-	memcpy((void *)0x100, __system_reset_kernel, 0x100);
-	flush_cache((void *)0x100, 0x100);
+	memcpy((void *)0x100, __system_reset_kernel, 512);
+	flush_cache((void *)0x100, 512);
 }
 
-void platform_init(void)
+void platform_init(unsigned long null_check)
 {
 	const u32 heapsize = 0x1000000 - (u32)_end; /* 16MiB */
 	void *chosen;
 	unsigned long ft_addr;
 	u64 rm_size;
+	unsigned long val;
 
 	console_ops.write = ps3_console_write;
 	platform_ops.exit = ps3_exit;
@@ -151,6 +153,11 @@ void platform_init(void)
 
 	printf(" flat tree at 0x%lx\n\r", ft_addr);
 
+	val = *(unsigned long *)0;
+
+	if (val != null_check)
+		printf("null check failed: %lx != %lx\n\r", val, null_check);
+
 	((kernel_entry_t)0)(ft_addr, 0, NULL);
 
 	ps3_exit();
diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c
index 9960421eb6b9..8b3607cb53fb 100644
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@@ -119,7 +119,7 @@ int serial_console_init(void)
 
 	if (dt_is_compatible(devp, "ns16550"))
 		rc = ns16550_console_init(devp, &serial_cd);
-	else if (dt_is_compatible(devp, "marvell,mpsc"))
+	else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
 		rc = mpsc_console_init(devp, &serial_cd);
 	else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
 	         dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
new file mode 100644
index 000000000000..86cd285bccc6
--- /dev/null
+++ b/arch/powerpc/boot/simpleboot.c
@@ -0,0 +1,84 @@
+/*
+ * The simple platform -- for booting when firmware doesn't supply a device
+ *                        tree or any platform configuration information.
+ *                        All data is extracted from an embedded device tree
+ *                        blob.
+ *
+ * Authors: Scott Wood <scottwood@freescale.com>
+ *          Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "types.h"
+#include "io.h"
+#include "stdio.h"
+#include "libfdt/libfdt.h"
+
+BSS_STACK(4*1024);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	const u32 *na, *ns, *reg, *timebase;
+	u64 memsize64;
+	int node, size, i;
+
+	/* Make sure FDT blob is sane */
+	if (fdt_check_header(_dtb_start) != 0)
+		fatal("Invalid device tree blob\n");
+
+	/* Find the #address-cells and #size-cells properties */
+	node = fdt_path_offset(_dtb_start, "/");
+	if (node < 0)
+		fatal("Cannot find root node\n");
+	na = fdt_getprop(_dtb_start, node, "#address-cells", &size);
+	if (!na || (size != 4))
+		fatal("Cannot find #address-cells property");
+	ns = fdt_getprop(_dtb_start, node, "#size-cells", &size);
+	if (!ns || (size != 4))
+		fatal("Cannot find #size-cells property");
+
+	/* Find the memory range */
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+					     "memory", sizeof("memory"));
+	if (node < 0)
+		fatal("Cannot find memory node\n");
+	reg = fdt_getprop(_dtb_start, node, "reg", &size);
+	if (size < (*na+*ns) * sizeof(u32))
+		fatal("cannot get memory range\n");
+
+	/* Only interested in memory based at 0 */
+	for (i = 0; i < *na; i++)
+		if (*reg++ != 0)
+			fatal("Memory range is not based at address 0\n");
+
+	/* get the memsize and trucate it to under 4G on 32 bit machines */
+	memsize64 = 0;
+	for (i = 0; i < *ns; i++)
+		memsize64 = (memsize64 << 32) | *reg++;
+	if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL)
+		memsize64 = 0xffffffff;
+
+	/* finally, setup the timebase */
+	node = fdt_node_offset_by_prop_value(_dtb_start, -1, "device_type",
+					     "cpu", sizeof("cpu"));
+	if (!node)
+		fatal("Cannot find cpu node\n");
+	timebase = fdt_getprop(_dtb_start, node, "timebase-frequency", &size);
+	if (timebase && (size == 4))
+		timebase_period_ns = 1000000000 / *timebase;
+
+	/* Now we have the memory size; initialize the heap */
+	simple_alloc_init(_end, memsize64 - (unsigned long)_end, 32, 64);
+
+	/* prepare the device tree and find the console */
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c
index 472e36605a52..097974e59fac 100644
--- a/arch/powerpc/boot/treeboot-walnut.c
+++ b/arch/powerpc/boot/treeboot-walnut.c
@@ -68,7 +68,7 @@ static void walnut_fixups(void)
 	ibm4xx_quiesce_eth((u32 *)0xef600800, NULL);
 	ibm4xx_fixup_ebc_ranges("/plb/ebc");
 	walnut_flashsel_fixup();
-	dt_fixup_mac_addresses((u8 *) WALNUT_OPENBIOS_MAC_OFF);
+	dt_fixup_mac_address_by_alias("ethernet0", (u8 *) WALNUT_OPENBIOS_MAC_OFF);
 }
 
 void platform_init(void)
diff --git a/arch/powerpc/boot/virtex405-head.S b/arch/powerpc/boot/virtex405-head.S
new file mode 100644
index 000000000000..3edb13f94669
--- /dev/null
+++ b/arch/powerpc/boot/virtex405-head.S
@@ -0,0 +1,30 @@
+#include "ppc_asm.h"
+
+	.text
+	.global _zimage_start
+_zimage_start:
+
+	/* PPC errata 213: needed by Virtex-4 FX */
+	mfccr0  0
+	oris    0,0,0x50000000@h
+	mtccr0  0
+
+	/*
+	 * Invalidate the data cache if the data cache is turned off.
+	 * - The 405 core does not invalidate the data cache on power-up
+	 *   or reset but does turn off the data cache. We cannot assume
+	 *   that the cache contents are valid.
+	 * - If the data cache is turned on this must have been done by
+	 *   a bootloader and we assume that the cache contents are
+	 *   valid.
+	 */
+	mfdccr	r9
+	cmplwi	r9,0
+	bne	2f
+	lis	r9,0
+	li	r8,256
+	mtctr	r8
+1:	dccci	r0,r9
+	addi	r9,r9,0x20
+	bdnz	1b
+2:	b	_zimage_start_lib
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index c3178155311b..d6c96d9ab291 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -174,10 +174,10 @@ cuboot*)
     *-mpc83*)
         platformo=$object/cuboot-83xx.o
         ;;
-    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*)
+    *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*)
+    *-mpc85*|*-tqm8540|*-sbc85*)
         platformo=$object/cuboot-85xx.o
         ;;
     esac
@@ -191,10 +191,18 @@ ps3)
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     ;;
-ep88xc|ep405|redboot*|ep8248e)
+ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
     binary=y
     ;;
+adder875-redboot)
+    platformo="$object/fixed-head.o $object/redboot-8xx.o"
+    binary=y
+    ;;
+simpleboot-virtex405-*)
+    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"
@@ -222,10 +230,13 @@ if [ -n "$version" ]; then
     uboot_version="-n Linux-$version"
 fi
 
+# physical offset of kernel image
+membase=`${CROSS}objdump -p "$kernel" | grep -m 1 LOAD | awk '{print $7}'`
+
 case "$platform" in
 uboot)
     rm -f "$ofile"
-    mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
+    mkimage -A ppc -O linux -T kernel -C gzip -a $membase -e $membase \
 	$uboot_version -d "$vmz" "$ofile"
     if [ -z "$cacheit" ]; then
 	rm -f "$vmz"
@@ -294,15 +305,16 @@ treeboot*)
     exit 0
     ;;
 ps3)
-    # The ps3's loader supports loading gzipped binary images from flash
-    # rom to addr zero. The loader enters the image at addr 0x100.  A
-    # bootwrapper overlay is use to arrange for the kernel to be loaded
-    # to addr zero and to have a suitable bootwrapper entry at 0x100.
-    # To construct the rom image, 0x100 bytes from offset 0x100 in the
-    # kernel is copied to the bootwrapper symbol __system_reset_kernel.
-    # The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
-    # then copied to offset 0x100.  At runtime the bootwrapper program
-    # copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
+    # The ps3's loader supports loading a gzipped binary image from flash
+    # rom to ram addr zero. The loader then enters the system reset
+    # vector at addr 0x100.  A bootwrapper overlay is used to arrange for
+    # a binary image of the kernel to be at addr zero, and yet have a
+    # suitable bootwrapper entry at 0x100.  To construct the final rom
+    # image 512 bytes from offset 0x100 is copied to the bootwrapper
+    # place holder at symbol __system_reset_kernel.  The 512 bytes of the
+    # bootwrapper entry code at symbol __system_reset_overlay is then
+    # copied to offset 0x100.  At runtime the bootwrapper program copies
+    # the data at __system_reset_kernel back to addr 0x100.
 
     system_reset_overlay=0x`${CROSS}nm "$ofile" \
         | grep ' __system_reset_overlay$'       \
@@ -313,7 +325,7 @@ ps3)
         | cut -d' ' -f1`
     system_reset_kernel=`printf "%d" $system_reset_kernel`
     overlay_dest="256"
-    overlay_size="256"
+    overlay_size="512"
 
     ${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
 
diff --git a/arch/powerpc/configs/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig
index e24240a9a047..e24240a9a047 100644
--- a/arch/powerpc/configs/ep405_defconfig
+++ b/arch/powerpc/configs/40x/ep405_defconfig
diff --git a/arch/powerpc/configs/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig
index 2f475391f1d1..2f475391f1d1 100644
--- a/arch/powerpc/configs/kilauea_defconfig
+++ b/arch/powerpc/configs/40x/kilauea_defconfig
diff --git a/arch/powerpc/configs/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig
index 9ef4d8a312c8..9ef4d8a312c8 100644
--- a/arch/powerpc/configs/makalu_defconfig
+++ b/arch/powerpc/configs/40x/makalu_defconfig
diff --git a/arch/powerpc/configs/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig
index 3b2689e5002a..3b2689e5002a 100644
--- a/arch/powerpc/configs/walnut_defconfig
+++ b/arch/powerpc/configs/40x/walnut_defconfig
diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig
index c44db554cdc6..c44db554cdc6 100644
--- a/arch/powerpc/configs/bamboo_defconfig
+++ b/arch/powerpc/configs/44x/bamboo_defconfig
diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig
new file mode 100644
index 000000000000..a3b763c45ec6
--- /dev/null
+++ b/arch/powerpc/configs/44x/canyonlands_defconfig
@@ -0,0 +1,721 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc1
+# Thu Feb 21 14:29:28 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_LOGBUFFER is not set
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+CONFIG_CANYONLANDS=y
+CONFIG_460EX=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_WANT_DEVICE_TREE=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x01000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=256
+CONFIG_IBM_NEW_EMAC_TXB=256
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+CONFIG_IBM_NEW_EMAC_TAH=y
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_KGDB is not set
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig
index 07c8d4ce175a..07c8d4ce175a 100644
--- a/arch/powerpc/configs/ebony_defconfig
+++ b/arch/powerpc/configs/44x/ebony_defconfig
diff --git a/arch/powerpc/configs/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig
index c8804ec01ea4..c8804ec01ea4 100644
--- a/arch/powerpc/configs/katmai_defconfig
+++ b/arch/powerpc/configs/44x/katmai_defconfig
diff --git a/arch/powerpc/configs/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig
index dec18ca73519..dec18ca73519 100644
--- a/arch/powerpc/configs/rainier_defconfig
+++ b/arch/powerpc/configs/44x/rainier_defconfig
diff --git a/arch/powerpc/configs/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig
index dd5d6303c396..dd5d6303c396 100644
--- a/arch/powerpc/configs/sequoia_defconfig
+++ b/arch/powerpc/configs/44x/sequoia_defconfig
diff --git a/arch/powerpc/configs/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 087aedce1338..087aedce1338 100644
--- a/arch/powerpc/configs/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
diff --git a/arch/powerpc/configs/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig
index 2313c3e8ef61..2313c3e8ef61 100644
--- a/arch/powerpc/configs/warp_defconfig
+++ b/arch/powerpc/configs/44x/warp_defconfig
diff --git a/arch/powerpc/configs/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 3b29ac53844e..7d18440e398f 100644
--- a/arch/powerpc/configs/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:35:55 2008
+# Linux kernel version: 2.6.25-rc6
+# Fri Apr 11 11:10:09 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,11 +148,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -145,7 +161,10 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
 # CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
 CONFIG_PPC_MPC831x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -156,7 +175,6 @@ CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -172,12 +190,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -196,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -250,6 +269,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -340,6 +361,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -415,6 +437,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -438,7 +461,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -446,6 +469,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +535,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -549,7 +575,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -565,6 +590,7 @@ CONFIG_CICADA_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -573,6 +599,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -592,6 +619,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -603,6 +631,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -629,6 +660,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -651,7 +683,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -694,6 +725,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -767,14 +799,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -813,6 +843,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -843,6 +874,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -852,9 +884,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -934,6 +968,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -947,10 +982,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1001,10 +1036,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1030,14 +1061,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1063,7 +1086,9 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1095,20 +1120,23 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1116,6 +1144,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1141,12 +1170,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1199,8 +1226,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1248,7 +1277,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1266,7 +1294,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1285,6 +1313,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1297,9 +1326,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1318,6 +1347,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1335,6 +1365,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1349,11 +1382,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 9adf7f98f675..1f57456dd81e 100644
--- a/arch/powerpc/configs/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 23 20:02:25 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -134,11 +148,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -146,6 +161,8 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
 # CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
 CONFIG_PPC_MPC831x=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
@@ -158,7 +175,6 @@ CONFIG_IPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -174,12 +190,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -198,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -252,6 +268,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -307,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -342,6 +360,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -417,6 +436,7 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -440,7 +460,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -448,6 +468,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -512,6 +534,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -566,6 +589,7 @@ CONFIG_SATA_FSL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -623,6 +647,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -631,6 +656,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -650,6 +676,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -661,7 +688,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -688,6 +717,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -710,7 +740,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -753,6 +782,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -826,14 +856,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -872,6 +900,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -902,6 +931,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -911,9 +941,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -993,6 +1025,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1006,10 +1039,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1060,10 +1093,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1089,14 +1118,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1122,7 +1143,9 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1154,20 +1177,23 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1175,6 +1201,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1200,12 +1227,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1258,8 +1283,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1324,7 +1351,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1343,6 +1369,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1355,9 +1382,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1376,6 +1403,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1393,6 +1421,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1407,11 +1438,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 2d8951b1096e..50cceda8994f 100644
--- a/arch/powerpc/configs/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:33 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:51 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 CONFIG_MPC832x_MDS=y
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
 CONFIG_PPC_MPC832x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -156,7 +176,6 @@ CONFIG_PPC_MPC832x=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -172,13 +191,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -250,6 +269,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -349,7 +370,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -357,6 +378,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -421,6 +444,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -451,7 +475,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -467,6 +490,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -488,6 +512,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -518,6 +545,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -531,7 +559,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -574,6 +601,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -593,14 +621,14 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -647,14 +675,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -679,6 +705,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -708,6 +735,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -717,9 +745,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -785,12 +815,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -822,6 +849,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -831,9 +859,10 @@ CONFIG_RTC_DRV_DS1374=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -841,6 +870,7 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -866,12 +896,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -913,8 +941,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -958,7 +988,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
 
@@ -976,7 +1005,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -990,6 +1018,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1003,6 +1032,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1020,6 +1050,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1034,12 +1067,15 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 761718a63b7c..ac913025713e 100644
--- a/arch/powerpc/configs/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:35 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 CONFIG_MPC832x_RDB=y
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
 CONFIG_PPC_MPC832x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -156,7 +176,6 @@ CONFIG_PPC_MPC832x=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -172,13 +191,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -250,6 +269,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -305,6 +325,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -350,7 +371,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -358,6 +379,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -422,6 +445,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -452,7 +476,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -468,6 +491,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -476,6 +500,7 @@ CONFIG_MII=y
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -491,6 +516,9 @@ CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -521,6 +549,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -543,7 +572,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -586,6 +614,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -605,6 +634,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -660,14 +690,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -705,6 +733,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -735,6 +764,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -744,9 +774,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -826,6 +858,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -839,9 +872,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -892,10 +926,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -921,14 +951,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -948,10 +970,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -977,12 +1001,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1027,8 +1049,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1116,7 +1140,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
 
@@ -1134,7 +1157,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1148,6 +1170,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1161,6 +1184,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1178,6 +1202,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1192,12 +1219,15 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 2fbe4e5344f7..e1de399a7bdd 100644
--- a/arch/powerpc/configs/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:37 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:17 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -155,7 +175,6 @@ CONFIG_MPC834x=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -171,12 +190,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -248,6 +267,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -427,7 +448,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -435,6 +456,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
@@ -503,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -533,6 +557,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -556,6 +581,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -599,7 +625,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -615,6 +640,7 @@ CONFIG_CICADA_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -623,6 +649,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -649,6 +678,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -671,7 +701,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -694,6 +723,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -767,14 +797,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -803,6 +831,7 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -867,6 +896,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -880,10 +910,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
@@ -927,10 +957,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -956,16 +982,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -997,20 +1016,23 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1018,6 +1040,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1043,12 +1066,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1094,8 +1115,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1182,7 +1205,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1198,7 +1220,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1212,6 +1233,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1225,6 +1247,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1242,6 +1265,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1256,11 +1282,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 67cb09cc3ace..b4e39cf82a8c 100644
--- a/arch/powerpc/configs/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:39 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -155,7 +175,6 @@ CONFIG_MPC834x=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -171,12 +190,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -248,6 +267,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -427,7 +448,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -435,6 +456,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -529,7 +553,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -545,6 +568,7 @@ CONFIG_CICADA_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 # CONFIG_NET_ETHERNET is not set
@@ -553,6 +577,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -579,6 +606,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -601,7 +629,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -624,6 +651,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,14 +725,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -733,6 +759,7 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -797,6 +824,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -810,10 +838,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 CONFIG_USB_UHCI_HCD=y
@@ -857,10 +885,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -885,16 +909,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -926,20 +943,23 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
 #
-# CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -947,6 +967,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -972,12 +993,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1023,8 +1042,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1111,7 +1132,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1127,7 +1147,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1141,6 +1160,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1154,6 +1174,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1171,6 +1192,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1185,11 +1209,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 217539f3ecef..b4e82c0e2be7 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:41 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:56 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,18 +148,23 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
-CONFIG_MPC834x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -155,7 +175,6 @@ CONFIG_MPC834x=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -171,12 +190,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -195,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -248,6 +267,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -303,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -347,7 +368,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -355,6 +376,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -383,7 +406,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -399,6 +421,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -426,6 +449,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -437,6 +461,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -463,6 +490,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -475,7 +503,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -518,6 +545,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -543,8 +571,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -591,14 +618,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -623,6 +648,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -652,6 +678,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -661,9 +688,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -725,18 +754,13 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_FSL=y
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -768,6 +792,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -777,9 +802,10 @@ CONFIG_RTC_DRV_DS1374=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -787,6 +813,7 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -812,12 +839,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -859,8 +884,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -904,7 +931,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -920,7 +946,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -934,6 +959,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -947,6 +973,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -964,6 +991,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -978,11 +1008,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index c44fc56263e2..d50a96eddcdc 100644
--- a/arch/powerpc/configs/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:43 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:36:57 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -86,11 +91,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -98,6 +105,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -125,6 +139,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,18 +148,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 CONFIG_MPC836x_MDS=y
-CONFIG_PPC_MPC836x=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -156,7 +175,6 @@ CONFIG_PPC_MPC836x=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -172,12 +190,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -196,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -249,6 +267,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -304,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -348,7 +368,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -356,6 +376,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -420,6 +442,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -450,7 +473,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -466,6 +488,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -487,6 +510,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -517,6 +543,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -530,7 +557,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -573,6 +599,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -592,14 +619,14 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -646,14 +673,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -678,6 +703,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -707,6 +733,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -716,9 +743,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -784,12 +813,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -821,6 +847,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -830,9 +857,10 @@ CONFIG_RTC_DRV_DS1374=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -840,6 +868,7 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -865,12 +894,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -912,8 +939,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,7 +986,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
 
@@ -975,7 +1003,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -989,6 +1016,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1002,6 +1030,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1019,6 +1048,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1033,12 +1065,15 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 4f49aee5da66..f377cde785b0 100644
--- a/arch/powerpc/configs/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Wed Oct 10 16:31:39 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:23 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,16 +14,22 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -61,12 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -79,17 +92,27 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -117,28 +140,32 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
 # CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_EMBEDDED6xx is not set
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
 CONFIG_MPC837x_MDS=y
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
 CONFIG_PPC_MPC837x=y
+CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -149,25 +176,31 @@ CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
-CONFIG_FSL_SERDES=y
 
 #
 # Kernel options
 #
 # CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -177,6 +210,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -185,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -203,10 +233,6 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -220,7 +246,7 @@ CONFIG_FSL_SOC=y
 CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
+CONFIG_TASK_SIZE=0xc0000000
 CONFIG_BOOT_LOAD=0x00800000
 
 #
@@ -238,6 +264,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -260,6 +287,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -285,10 +313,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -296,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -317,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -334,11 +360,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -377,11 +405,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
 CONFIG_SATA_FSL=y
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -393,6 +423,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -407,10 +438,18 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
 CONFIG_NETDEV_10000=y
@@ -423,7 +462,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -442,7 +480,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -488,14 +525,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
@@ -527,14 +556,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -551,8 +578,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -560,12 +585,13 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -588,6 +614,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -595,9 +622,25 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -614,16 +657,15 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Sound
@@ -632,6 +674,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -641,28 +684,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -681,7 +709,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -689,12 +716,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -722,7 +747,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -737,14 +761,13 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -787,17 +810,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -815,15 +829,10 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 
 #
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -831,6 +840,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -838,9 +848,11 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -857,6 +869,10 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -870,9 +886,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_ARC4 is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 91d291e3ee3a..a6331769d88f 100644
--- a/arch/powerpc/configs/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 20:04:39 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,17 +92,26 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +140,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -136,11 +149,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -149,6 +163,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC836x_MDS is not set
 # CONFIG_MPC837x_MDS is not set
 CONFIG_MPC837x_RDB=y
+# CONFIG_SBC834x is not set
 CONFIG_PPC_MPC837x=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
@@ -161,7 +176,6 @@ CONFIG_IPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -177,12 +191,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -201,11 +219,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -301,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -340,11 +355,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -389,6 +406,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
 CONFIG_SATA_FSL=y
 # CONFIG_PATA_PLATFORM is not set
 CONFIG_MD=y
@@ -425,6 +443,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -435,6 +454,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
 CONFIG_GFAR_NAPI=y
 # CONFIG_NETDEV_10000 is not set
@@ -447,7 +467,6 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -542,14 +561,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -574,6 +591,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -601,6 +619,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -608,9 +627,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -663,20 +684,40 @@ CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Miscellaneous USB options
 #
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 
 #
-# USB Gadget Support
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -702,12 +743,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -749,8 +788,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -813,10 +854,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -846,6 +883,7 @@ CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -863,6 +901,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -877,11 +918,13 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 9245bcc24724..1f1518229f6d 100644
--- a/arch/powerpc/configs/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 15:54:27 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:38 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,8 +14,8 @@ CONFIG_6xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,17 +91,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -127,6 +138,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -135,20 +147,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPC8313_RDB is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
 # CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
-CONFIG_MPC834x=y
+CONFIG_PPC_MPC834x=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -175,12 +189,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -248,6 +262,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -303,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -342,11 +358,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -381,6 +399,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -391,6 +410,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
 # CONFIG_NETDEV_10000 is not set
@@ -403,7 +423,6 @@ CONFIG_GIANFAR=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -498,14 +517,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -530,6 +547,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -557,6 +575,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -564,9 +583,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -617,9 +638,11 @@ CONFIG_HID=y
 # CONFIG_HIDRAW is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -638,12 +661,10 @@ CONFIG_HID=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -685,8 +706,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -733,7 +756,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -759,6 +781,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -776,6 +799,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -790,11 +816,13 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/adder875-redboot_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index cab5f9b64567..2d0debcefdbf 100644
--- a/arch/powerpc/configs/adder875-redboot_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:38 2008
+# Linux kernel version: 2.6.24
+# Mon Feb 11 16:25:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -9,14 +9,18 @@
 # Processor support
 #
 # CONFIG_6xx is not set
-# CONFIG_PPC_85xx is not set
-CONFIG_PPC_8xx=y
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_8xx=y
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
-CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
 CONFIG_PPC_MERGE=y
@@ -26,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -40,12 +45,11 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
-# CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_REDBOOT=y
+CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -58,7 +62,7 @@ CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -75,32 +79,41 @@ CONFIG_FAIR_USER_SCHED=y
 # CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=1
+CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
@@ -112,45 +125,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-CONFIG_DEFAULT_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_CPM1=y
-# CONFIG_MPC8XXFADS is not set
-# CONFIG_MPC86XADS is not set
-# CONFIG_MPC885ADS is not set
-# CONFIG_PPC_EP88XC is not set
-CONFIG_PPC_ADDER875=y
-
-#
-# MPC8xx CPM Options
-#
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_8xx_CPU15=y
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
 # CONFIG_PQ2ADS is not set
-# CONFIG_MPIC is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_KSI8560=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_RTAS is not set
@@ -160,7 +169,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
+CONFIG_CPM2=y
 CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
@@ -168,23 +177,25 @@ CONFIG_CPM=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_100 is not set
-# CONFIG_HZ_250 is not set
+CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
-CONFIG_HZ_1000=y
-CONFIG_HZ=1000
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_8XX_MINIMAL_FPEMU is not set
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -204,11 +215,8 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
 CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-redboot.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -219,7 +227,6 @@ CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
-# CONFIG_PCI_QSPAN is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
@@ -234,10 +241,8 @@ CONFIG_FSL_SOC=y
 CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
 
 #
 # Networking
@@ -250,14 +255,19 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -269,9 +279,9 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 # CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -305,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -336,8 +347,10 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -356,7 +369,7 @@ CONFIG_MTD_BLOCK=y
 # RAM/ROM/Flash chip drivers
 #
 CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_JEDECPROBE=y
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
@@ -383,7 +396,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_CFI_FLAGADM is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -409,9 +421,44 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -436,8 +483,8 @@ CONFIG_PHYLIB=y
 #
 # MII PHY device drivers
 #
-# CONFIG_MARVELL_PHY is not set
-CONFIG_DAVICOM_PHY=y
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
@@ -445,8 +492,9 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
+CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -456,10 +504,13 @@ CONFIG_MII=y
 # CONFIG_B44 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
-CONFIG_FS_ENET_HAS_FEC=y
-CONFIG_FS_ENET_MDIO_FEC=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_FS_ENET_HAS_FCC=y
+CONFIG_FS_ENET_MDIO_FCC=y
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
@@ -469,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -486,10 +536,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
@@ -497,23 +544,8 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 # Input Device Drivers
 #
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -522,11 +554,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -548,14 +576,15 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
+CONFIG_SERIAL_CPM_SCC1=y
 # CONFIG_SERIAL_CPM_SCC2 is not set
 # CONFIG_SERIAL_CPM_SCC3 is not set
 # CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
+# CONFIG_SERIAL_CPM_SMC1 is not set
+# CONFIG_SERIAL_CPM_SMC2 is not set
 CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -573,7 +602,19 @@ CONFIG_GEN_RTC=y
 # CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -611,8 +652,19 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Sound
 #
 # CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
@@ -626,9 +678,17 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
@@ -637,9 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
+CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -661,7 +722,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
@@ -680,7 +741,7 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -688,14 +749,12 @@ CONFIG_CRAMFS=y
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_SUNRPC_BIND34 is not set
@@ -716,11 +775,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_AMIGA_PARTITION is not set
 # CONFIG_ATARI_PARTITION is not set
 # CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_MSDOS_PARTITION is not set
 # CONFIG_LDM_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
@@ -730,24 +785,21 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC32 is not set
+CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -755,9 +807,9 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -766,24 +818,30 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -793,6 +851,49 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 3791e29e7d06..b998539da86e 100644
--- a/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:44 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 CONFIG_MPC8540_ADS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -165,13 +187,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,18 +216,13 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
 CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
@@ -238,6 +259,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -293,6 +315,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -334,11 +357,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -373,6 +398,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -383,6 +409,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
 CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
@@ -395,7 +422,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -489,6 +515,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -538,15 +565,13 @@ CONFIG_USB_SUPPORT=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -572,12 +597,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -619,8 +642,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -661,7 +686,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -677,7 +701,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -696,6 +719,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -708,8 +732,8 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -725,5 +749,48 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 18623a8ee75c..a9f113b243ae 100644
--- a/arch/powerpc/configs/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:46 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -131,21 +146,31 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx=y
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -172,13 +197,18 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +227,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -252,6 +278,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -335,6 +362,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -383,7 +411,7 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -391,6 +419,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -456,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -486,6 +517,7 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -509,6 +541,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -542,7 +575,6 @@ CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -558,6 +590,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -579,6 +612,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -605,6 +641,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -627,7 +664,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -678,6 +714,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -707,8 +744,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -756,14 +792,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -779,6 +813,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -803,6 +838,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported SAA7146 based PCI Adapters
 #
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
 
 #
 # Supported USB Adapters
@@ -888,11 +925,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_PLL is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
 # CONFIG_DVB_TUNER_QT1010 is not set
 # CONFIG_DVB_TUNER_MT2060 is not set
 # CONFIG_DVB_TUNER_MT2266 is not set
 # CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
 # Miscellaneous devices
@@ -970,6 +1009,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -995,6 +1035,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 CONFIG_SND_INTEL8X0=y
@@ -1012,6 +1053,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1041,6 +1083,10 @@ CONFIG_SND_INTEL8X0=y
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1063,6 +1109,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1076,9 +1123,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1129,10 +1177,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1158,16 +1202,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1199,6 +1236,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1208,9 +1246,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1218,6 +1257,19 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+# CONFIG_FSL_DMA_SELFTEST is not set
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
 
 #
 # Userspace I/O
@@ -1243,12 +1295,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1300,8 +1350,10 @@ CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -1393,7 +1445,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1410,7 +1461,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1429,6 +1480,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1442,9 +1494,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1463,6 +1515,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1481,6 +1534,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1495,11 +1551,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 51f9693bacd4..851ac9115617 100644
--- a/arch/powerpc/configs/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:48 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:27 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -167,13 +189,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -192,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -246,6 +268,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -301,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -347,7 +371,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -355,6 +379,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -383,7 +409,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -399,6 +424,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -426,6 +452,9 @@ CONFIG_E1000=y
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -452,6 +481,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -464,7 +494,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -507,6 +536,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -567,6 +597,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -619,16 +650,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -654,12 +683,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -701,8 +728,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -743,7 +772,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -759,7 +787,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -778,6 +805,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -790,8 +818,8 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -808,6 +836,50 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index f51b58ae329a..2b866b385607 100644
--- a/arch/powerpc/configs/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:50 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -87,11 +92,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -99,6 +106,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -126,21 +140,30 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC85xx_MDS=y
 # CONFIG_MPC85xx_DS is not set
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -168,13 +191,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -193,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -247,6 +270,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -302,6 +326,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -348,7 +373,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -356,6 +381,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -420,6 +447,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -450,7 +478,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -466,6 +493,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -487,6 +515,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -514,6 +545,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -527,7 +559,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -570,6 +601,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -590,14 +622,14 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
+# CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -644,14 +676,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -676,6 +706,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -705,6 +736,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -714,9 +746,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -782,12 +816,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -819,6 +850,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -828,9 +860,10 @@ CONFIG_RTC_DRV_DS1374=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -838,6 +871,7 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -863,12 +897,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -910,8 +942,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -955,7 +989,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -971,7 +1004,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -990,6 +1022,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1002,9 +1035,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1023,6 +1056,7 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
 # CONFIG_PPC_EARLY_DEBUG_BEAT is not set
 # CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
 
 #
@@ -1034,6 +1068,7 @@ CONFIG_PPC_EARLY_DEBUG=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1051,6 +1086,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1065,12 +1103,15 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index b40802d17e03..53aa6f3173a5 100644
--- a/arch/powerpc/configs/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:52 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -131,21 +146,30 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 CONFIG_MPC85xx_DS=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -172,13 +196,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +225,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -252,6 +276,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -335,6 +360,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -383,7 +409,7 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -391,6 +417,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -456,6 +484,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -486,6 +515,7 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -509,6 +539,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -542,7 +573,6 @@ CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -558,6 +588,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -579,6 +610,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -605,6 +639,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -627,7 +662,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -678,6 +712,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -707,8 +742,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -756,14 +790,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -779,6 +811,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -803,6 +836,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported SAA7146 based PCI Adapters
 #
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
 
 #
 # Supported USB Adapters
@@ -888,11 +923,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_PLL is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
 # CONFIG_DVB_TUNER_QT1010 is not set
 # CONFIG_DVB_TUNER_MT2060 is not set
 # CONFIG_DVB_TUNER_MT2266 is not set
 # CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
 # Miscellaneous devices
@@ -970,6 +1007,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -995,6 +1033,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 CONFIG_SND_INTEL8X0=y
@@ -1012,6 +1051,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1041,6 +1081,10 @@ CONFIG_SND_INTEL8X0=y
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1063,6 +1107,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1076,9 +1121,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1129,10 +1175,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1158,16 +1200,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1199,6 +1234,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1208,9 +1244,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1218,6 +1255,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1243,12 +1281,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1300,8 +1336,10 @@ CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -1393,7 +1431,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1410,7 +1447,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1429,6 +1465,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1442,9 +1479,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1463,6 +1500,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1481,6 +1519,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1495,11 +1536,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 2f9ad589b004..a469fe918816 100644
--- a/arch/powerpc/configs/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:54 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,15 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +94,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -123,22 +137,30 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -165,13 +187,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -190,11 +216,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -244,6 +266,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -299,6 +322,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -345,7 +369,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -353,12 +377,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
@@ -374,12 +400,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -410,7 +436,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -441,7 +466,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -457,6 +481,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -480,6 +505,9 @@ CONFIG_E1000=y
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -506,6 +534,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -518,7 +547,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -561,6 +589,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -620,6 +649,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -672,16 +702,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -707,12 +735,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -754,8 +780,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -796,7 +824,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -812,7 +839,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -831,6 +857,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -843,8 +870,8 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -860,5 +887,49 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 3b7fa53a2475..67f67978c742 100644
--- a/arch/powerpc/configs/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 15:19:12 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -90,17 +93,25 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,24 +135,29 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
 # CONFIG_SBC8560 is not set
-CONFIG_MPC8540=y
-CONFIG_MPC85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -153,6 +169,7 @@ CONFIG_MPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -168,13 +185,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -193,11 +214,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -246,6 +263,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -301,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -345,7 +364,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -353,6 +372,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -396,6 +417,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -417,7 +439,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -444,6 +468,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -456,7 +481,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -499,6 +523,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -558,6 +583,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -600,10 +626,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -622,12 +650,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -669,8 +695,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -714,7 +742,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -737,5 +764,49 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index d89fce0d3ba1..fef605579e29 100644
--- a/arch/powerpc/configs/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Wed Jan 23 14:59:20 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,17 +94,26 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -124,23 +136,30 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
 CONFIG_SBC8560=y
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -167,13 +186,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -192,11 +215,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -239,6 +258,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -294,6 +314,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -335,11 +356,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -374,6 +397,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=y
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -384,6 +408,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
 CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
@@ -396,7 +421,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -489,6 +513,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -538,12 +563,9 @@ CONFIG_USB_SUPPORT=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
@@ -569,9 +591,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 CONFIG_RTC_DRV_M48T59=y
 # CONFIG_RTC_DRV_V3020 is not set
@@ -579,6 +602,7 @@ CONFIG_RTC_DRV_M48T59=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -597,12 +621,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -644,8 +666,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -686,7 +710,6 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -702,7 +725,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -733,8 +755,8 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -752,6 +774,7 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
 # CONFIG_PPC_EARLY_DEBUG_BEAT is not set
 # CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
 # CONFIG_PPC_EARLY_DEBUG_CPM is not set
 
 #
@@ -760,5 +783,48 @@ CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index e8137a839bd4..1d303c49bb0c 100644
--- a/arch/powerpc/configs/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 02:02:30 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +108,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,23 +142,29 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_STX_GP3=y
-CONFIG_MPC8560=y
-CONFIG_MPC85xx=y
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -176,13 +194,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -201,11 +223,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="stx_gp3_8560.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -255,6 +273,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -290,31 +309,36 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 # CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
@@ -329,13 +353,10 @@ CONFIG_NETFILTER_XTABLES=m
 #
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
 # CONFIG_IP_NF_MATCH_RECENT is not set
 # CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_AH is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
 # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 # CONFIG_IP_NF_TARGET_REJECT is not set
@@ -365,6 +386,7 @@ CONFIG_IP_NF_FILTER=m
 #
 CONFIG_NET_PKTGEN=y
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -418,7 +440,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -426,17 +448,20 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -452,7 +477,6 @@ CONFIG_IDE_GENERIC=y
 #
 # PCI IDE chipsets support
 #
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
@@ -480,7 +504,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -550,6 +573,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -595,6 +619,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -618,7 +643,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -645,6 +672,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -659,7 +687,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -727,6 +754,7 @@ CONFIG_SERIO_LIBPS2=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -805,14 +833,12 @@ CONFIG_I2C_ALGOBIT=m
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -837,6 +863,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -866,6 +893,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -875,9 +903,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -947,16 +977,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 
 #
@@ -983,12 +1011,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1036,8 +1062,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1124,10 +1152,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1146,6 +1170,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1159,9 +1184,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1178,6 +1203,51 @@ CONFIG_BDI_SWITCH=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 732de34cfc27..d39ee3b35bfc 100644
--- a/arch/powerpc/configs/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:32:05 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
 CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -173,13 +187,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -198,11 +216,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8540.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -249,6 +263,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -304,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -335,6 +351,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -421,7 +438,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -429,12 +446,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -450,12 +469,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -486,7 +505,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -532,6 +550,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -559,6 +578,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -570,7 +590,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -597,6 +619,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -609,7 +632,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -652,6 +674,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -725,14 +748,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -757,6 +778,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -786,6 +808,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -795,9 +818,11 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -850,16 +875,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -885,12 +908,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -943,8 +964,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1002,9 +1025,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1018,6 +1038,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1028,5 +1049,49 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 1aff35f0c53a..cbf6ad2d71da 100644
--- a/arch/powerpc/configs/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:31:28 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_TQM8541=y
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
 CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -174,13 +188,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8541.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -250,6 +264,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -533,6 +551,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -560,6 +579,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -654,6 +676,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -767,6 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1012,9 +1035,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB_CONSOLE is not set
@@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index a3af2262128b..bbff962c8472 100644
--- a/arch/powerpc/configs/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Fri Jan 25 01:15:24 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:44 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_TQM8541 is not set
 CONFIG_TQM8555=y
 # CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
 CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -174,13 +188,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8555.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -250,6 +264,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -533,6 +551,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -560,6 +579,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -654,6 +676,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -767,6 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1012,9 +1035,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB_CONSOLE is not set
@@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 0832e8996ac2..63c5ec8b6515 100644
--- a/arch/powerpc/configs/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Thu Jan 24 23:50:42 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:45 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -14,10 +14,10 @@ CONFIG_PPC_85xx=y
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
-CONFIG_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +92,13 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +106,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,15 +135,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
 # CONFIG_MPC8540_ADS is not set
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
@@ -143,8 +156,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_TQM8541 is not set
 # CONFIG_TQM8555 is not set
 CONFIG_TQM8560=y
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
 CONFIG_TQM85xx=y
-CONFIG_MPC85xx=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
@@ -174,13 +188,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -199,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="tqm8560.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -250,6 +264,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -305,6 +320,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -336,6 +352,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -422,7 +439,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -430,12 +447,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -451,12 +470,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -487,7 +506,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -533,6 +551,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -560,6 +579,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -572,7 +592,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -599,6 +621,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -611,7 +634,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -654,6 +676,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -735,14 +758,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -767,6 +788,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -796,6 +818,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -805,9 +828,11 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -860,16 +885,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -895,12 +918,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -953,8 +974,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1012,9 +1035,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1028,6 +1048,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB_CONSOLE is not set
@@ -1039,6 +1060,50 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/adder875-uboot_defconfig b/arch/powerpc/configs/adder875_defconfig
index 1faf7ef59a23..a3cc94a2ff06 100644
--- a/arch/powerpc/configs/adder875-uboot_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Thu Jan 17 16:17:18 2008
+# Linux kernel version: 2.6.25-rc2
+# Wed Feb 20 12:26:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -64,17 +65,18 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -87,11 +89,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -99,6 +103,12 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -120,12 +130,14 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -150,6 +162,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_I2C_SPI_UCODE_PATCH is not set
 # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -160,7 +173,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
@@ -178,14 +190,19 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -204,11 +221,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="adder875-uboot.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -305,6 +318,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -411,6 +425,7 @@ CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -445,6 +460,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -469,7 +485,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -574,6 +589,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
 
 #
@@ -614,6 +630,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
@@ -635,11 +652,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -682,8 +697,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -730,7 +747,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -745,9 +761,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -757,7 +770,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -766,6 +779,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -776,14 +790,15 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index f3bde8c6c8c6..c420e47426f8 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:05 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:31:04 2008
 #
 CONFIG_PPC64=y
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,8 +70,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -79,13 +78,20 @@ CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 # CONFIG_CGROUP_NS is not set
 CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -99,11 +105,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -111,6 +119,15 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -138,6 +155,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -148,8 +166,8 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -162,14 +180,14 @@ CONFIG_PPC_PS3=y
 # CONFIG_PS3_ADVANCED is not set
 CONFIG_PS3_HTAB_SIZE=20
 # CONFIG_PS3_DYNAMIC_DMA is not set
-CONFIG_PS3_USE_LPAR_ADDR=y
 CONFIG_PS3_VUART=y
 CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=m
+CONFIG_PS3_SYS_MANAGER=y
 CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=m
 CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
@@ -183,10 +201,12 @@ CONFIG_CBE_RAS=y
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
 CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_OPROFILE_CELL=y
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_PPC_UDBG_BEAT=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -219,7 +239,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 #
 # CPU Frequency drivers
 #
-# CONFIG_CPM2 is not set
 CONFIG_AXON_RAM=m
 # CONFIG_FSL_ULI1575 is not set
 
@@ -235,16 +254,20 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -267,6 +290,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -276,12 +300,12 @@ CONFIG_ARCH_MEMORY_PROBE=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -318,6 +342,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -368,6 +393,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
@@ -375,7 +401,6 @@ CONFIG_NETFILTER=y
 CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-# CONFIG_NF_CONNTRACK_ENABLED is not set
 # CONFIG_NF_CONNTRACK is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -383,20 +408,25 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -411,20 +441,16 @@ CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 #
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -433,7 +459,7 @@ CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
@@ -459,6 +485,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -467,7 +494,7 @@ CONFIG_NET_CLS_ROUTE=y
 # Wireless
 #
 # CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
+CONFIG_WIRELESS_EXT=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -505,7 +532,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -513,11 +540,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -534,12 +563,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -571,7 +600,6 @@ CONFIG_BLK_DEV_SIIMAGE=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_CELLEB=y
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -637,6 +665,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -689,6 +718,7 @@ CONFIG_SATA_PROMISE=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -703,6 +733,7 @@ CONFIG_PATA_PDC2027X=m
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_PATA_SCC is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -748,7 +779,6 @@ CONFIG_MACVLAN=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -773,6 +803,9 @@ CONFIG_E1000=m
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -788,6 +821,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=y
 CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 CONFIG_NETDEV_10000=y
@@ -802,6 +836,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -824,7 +859,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -883,16 +917,17 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -976,13 +1011,12 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -998,6 +1032,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1082,6 +1117,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1095,10 +1131,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1149,10 +1185,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1178,16 +1210,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
@@ -1198,6 +1223,7 @@ CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1211,7 +1237,9 @@ CONFIG_EDAC=y
 #
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_CELL=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1239,12 +1267,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
@@ -1293,8 +1319,10 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1382,7 +1410,6 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1404,11 +1431,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1427,6 +1449,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1439,9 +1462,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1464,7 +1487,9 @@ CONFIG_IRQSTACKS=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1483,6 +1508,9 @@ CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1497,11 +1525,14 @@ CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig
index 9ed2e098f96f..9ba3c6fc2fef 100644
--- a/arch/powerpc/configs/celleb_defconfig
+++ b/arch/powerpc/configs/celleb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:07 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 10:32:45 2008
 #
 CONFIG_PPC64=y
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,16 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -92,11 +99,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +113,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -131,6 +148,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -141,8 +159,8 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -164,6 +182,7 @@ CONFIG_CBE_RAS=y
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_PPC_UDBG_BEAT=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -177,7 +196,6 @@ CONFIG_PPC_RTAS=y
 CONFIG_PPC_INDIRECT_IO=y
 CONFIG_GENERIC_IOMAP=y
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -192,16 +210,20 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
@@ -223,6 +245,7 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTREMOVE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
@@ -237,7 +260,6 @@ CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -273,6 +295,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -320,12 +343,13 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
@@ -337,7 +361,7 @@ CONFIG_IP_NF_QUEUE=m
 # CONFIG_IP_NF_ARPTABLES is not set
 
 #
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
@@ -362,6 +386,7 @@ CONFIG_IP_NF_QUEUE=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -408,7 +433,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -416,16 +441,19 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -437,12 +465,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -474,7 +502,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_CELLEB=y
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -540,6 +567,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -589,7 +617,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -612,6 +639,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -638,6 +668,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -660,7 +691,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -719,16 +749,17 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
 # CONFIG_SPECIALIX is not set
 # CONFIG_SX is not set
 # CONFIG_RIO is not set
 # CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -802,13 +833,12 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -824,6 +854,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -905,6 +936,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -918,10 +950,10 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -969,10 +1001,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -998,20 +1026,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1041,12 +1063,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1095,8 +1115,10 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1188,7 +1210,6 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1206,10 +1227,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1228,6 +1245,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1240,9 +1258,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1265,7 +1283,9 @@ CONFIG_IRQSTACKS=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1284,6 +1304,9 @@ CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1299,11 +1322,13 @@ CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 5989b5d2277e..d7fd298bd234 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:09 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 27 13:55:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,16 +68,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=15
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -90,11 +95,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -102,6 +109,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -130,6 +145,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -140,16 +156,17 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
 # CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -163,7 +180,6 @@ CONFIG_PPC_MPC106=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -179,13 +195,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -207,7 +226,6 @@ CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -223,7 +241,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -286,74 +304,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_ADVANCED is not set
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
 CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 # CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -361,20 +337,14 @@ CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_TFTP is not set
 # CONFIG_NF_NAT_AMANDA is not set
 # CONFIG_NF_NAT_PPTP is not set
 # CONFIG_NF_NAT_H323 is not set
 CONFIG_NF_NAT_SIP=m
 # CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
@@ -396,6 +366,7 @@ CONFIG_NF_NAT_SIP=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -445,7 +416,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -453,16 +424,19 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -474,12 +448,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -510,7 +484,6 @@ CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 
 #
 # Other IDE chipsets support
@@ -599,6 +572,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
@@ -607,7 +581,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
@@ -640,7 +613,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -688,6 +660,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -701,6 +674,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -726,6 +702,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -758,7 +735,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -838,6 +814,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -917,14 +894,12 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -940,6 +915,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1083,6 +1059,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1096,9 +1073,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1147,10 +1124,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1176,20 +1149,14 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1215,12 +1182,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1267,8 +1232,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1342,7 +1309,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1360,10 +1326,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1382,6 +1345,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1395,9 +1359,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1420,6 +1384,7 @@ CONFIG_XMON_DISASSEMBLY=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1437,6 +1402,9 @@ CONFIG_CRYPTO_CBC=m
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1451,11 +1419,13 @@ CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 01ad5951ade9..2b1504e0a111 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Fri Jan 11 14:02:06 2008
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:09 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,11 +70,14 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -85,17 +89,26 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -117,6 +130,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -125,8 +139,8 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 CONFIG_PPC_82xx=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_MPC8272_ADS is not set
@@ -135,6 +149,7 @@ CONFIG_EP8248E=y
 # CONFIG_PQ2ADS is not set
 CONFIG_8260=y
 CONFIG_8272=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -163,12 +178,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -183,11 +202,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="ep8248e.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -272,12 +287,13 @@ CONFIG_IPV6_SIT=y
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
@@ -287,6 +303,13 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -300,6 +323,7 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -308,6 +332,7 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -415,6 +440,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -448,6 +474,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -462,6 +489,8 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 # CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -532,6 +561,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -571,8 +601,10 @@ CONFIG_DAB=y
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -593,12 +625,10 @@ CONFIG_JBD=y
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -626,6 +656,7 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -634,8 +665,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -715,7 +748,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -731,9 +763,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -764,8 +793,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -784,6 +813,7 @@ CONFIG_BDI_SWITCH=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -797,6 +827,9 @@ CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -816,6 +849,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index a1f98200d9e3..125b4764aadd 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:13 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -63,15 +64,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -84,11 +89,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -96,6 +103,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -117,12 +131,13 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -130,6 +145,7 @@ CONFIG_CPM1=y
 # CONFIG_MPC86XADS is not set
 # CONFIG_MPC885ADS is not set
 CONFIG_PPC_EP88XC=y
+# CONFIG_PPC_ADDER875 is not set
 
 #
 # MPC8xx CPM Options
@@ -146,6 +162,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_I2C_SPI_UCODE_PATCH is not set
 # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -156,7 +173,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
@@ -174,6 +190,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -181,7 +198,10 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -200,11 +220,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="ep88xc.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -301,6 +317,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -407,6 +424,7 @@ CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -441,6 +459,7 @@ CONFIG_LXT_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -465,7 +484,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -528,6 +546,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -567,9 +586,11 @@ CONFIG_DAB=y
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -588,11 +609,9 @@ CONFIG_DAB=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -635,8 +654,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -683,7 +704,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -698,7 +718,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -717,6 +736,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -727,8 +747,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 3673dd23120c..a20501f89474 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:15 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 27 13:55:43 2008
 #
 CONFIG_PPC64=y
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -48,7 +49,9 @@ CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_PPC64_SWSUSP=y
+CONFIG_HIBERNATE_64=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 # CONFIG_PPC_OF_PLATFORM_PCI is not set
@@ -68,18 +71,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -93,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -105,6 +112,15 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -132,6 +148,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -142,8 +159,8 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
@@ -155,6 +172,7 @@ CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -185,7 +203,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CPU Frequency drivers
 #
 CONFIG_CPU_FREQ_PMAC64=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -200,17 +217,21 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 # CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -236,11 +257,9 @@ CONFIG_BOUNCE=y
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_SMP_POSSIBLE=y
-CONFIG_HIBERNATION_SMP_POSSIBLE=y
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -255,7 +274,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -276,6 +295,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -310,12 +330,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 CONFIG_NF_CONNTRACK_MARK=y
@@ -331,6 +353,7 @@ CONFIG_NF_CONNTRACK_IRC=m
 # CONFIG_NF_CONNTRACK_SANE is not set
 # CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -363,6 +386,7 @@ CONFIG_LLC=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -409,7 +433,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -419,16 +443,19 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -440,12 +467,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
@@ -478,7 +505,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -544,6 +570,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -596,6 +623,7 @@ CONFIG_SATA_SVW=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -610,6 +638,7 @@ CONFIG_SATA_SVW=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -676,7 +705,6 @@ CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -701,6 +729,9 @@ CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -726,6 +757,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -771,7 +803,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -834,6 +865,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -901,13 +933,12 @@ CONFIG_I2C_POWERMAC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -923,6 +954,7 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1083,6 +1115,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1108,6 +1141,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1125,6 +1159,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -1166,6 +1201,10 @@ CONFIG_SND_USB_AUDIO=m
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1192,6 +1231,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1205,9 +1245,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1259,11 +1299,8 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
@@ -1284,6 +1321,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m
 CONFIG_USB_SERIAL_EDGEPORT_TI=m
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1316,7 +1354,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -1341,20 +1378,14 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1393,12 +1424,10 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1447,8 +1476,10 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1546,7 +1577,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1564,11 +1594,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1587,6 +1613,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1599,9 +1626,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1621,7 +1648,9 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1640,6 +1669,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1655,11 +1687,13 @@ CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 4a87745c7803..b3128fb7ce7e 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Wed Nov 21 11:19:59 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 27 13:55:45 2008
 #
 CONFIG_PPC64=y
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,8 +69,6 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
@@ -77,11 +76,15 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -95,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -107,6 +112,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -134,6 +147,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -153,8 +167,8 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -164,6 +178,7 @@ CONFIG_VIOPATH=y
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -176,7 +191,6 @@ CONFIG_IBMVIO=y
 CONFIG_PPC_INDIRECT_IO=y
 CONFIG_GENERIC_IOMAP=y
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -191,15 +205,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -227,7 +245,6 @@ CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -242,7 +259,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
@@ -263,6 +280,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 CONFIG_XFRM_SUB_POLICY=y
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -297,12 +315,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 CONFIG_NF_CONNTRACK_MARK=y
@@ -318,6 +338,7 @@ CONFIG_NF_CONNTRACK_IRC=m
 # CONFIG_NF_CONNTRACK_SANE is not set
 # CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
@@ -326,8 +347,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -337,14 +360,17 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 # CONFIG_NETFILTER_XT_MATCH_STATE is not set
@@ -362,13 +388,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 # CONFIG_IP_NF_MATCH_AH is not set
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
@@ -379,7 +402,6 @@ CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
 # CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
@@ -389,7 +411,6 @@ CONFIG_NF_NAT_TFTP=m
 # CONFIG_NF_NAT_H323 is not set
 # CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
@@ -425,6 +446,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -470,7 +492,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -478,6 +500,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -518,6 +542,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
 CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_LOWLEVEL=y
@@ -543,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -589,7 +615,6 @@ CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -618,6 +643,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -631,6 +657,9 @@ CONFIG_E1000=m
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -656,6 +685,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -683,7 +713,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -734,6 +763,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -772,6 +802,7 @@ CONFIG_DEVPORT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -821,10 +852,12 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -869,12 +902,10 @@ CONFIG_GFS2_FS=m
 CONFIG_GFS2_FS_LOCKING_NOLOCK=m
 CONFIG_GFS2_FS_LOCKING_DLM=m
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -924,8 +955,10 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1009,7 +1042,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_UTF8 is not set
 CONFIG_DLM=m
 # CONFIG_DLM_DEBUG is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1031,10 +1063,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1053,6 +1082,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1065,9 +1095,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
@@ -1089,6 +1119,7 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1107,6 +1138,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1122,11 +1156,13 @@ CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_SEED=m
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 7b4280811fb9..22a943afc3c0 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:22 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,16 +67,24 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +112,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -128,6 +147,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -138,22 +158,24 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
 # CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_EMBEDDED6xx=y
 CONFIG_LINKSTATION=y
+# CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -165,7 +187,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -181,12 +202,16 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -206,10 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -259,6 +281,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -295,12 +318,13 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 # CONFIG_NF_CONNTRACK_MARK is not set
@@ -317,6 +341,7 @@ CONFIG_NF_CONNTRACK_PPTP=m
 # CONFIG_NF_CONNTRACK_SANE is not set
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
 CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
@@ -325,8 +350,10 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
 # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -336,14 +363,17 @@ CONFIG_NETFILTER_XTABLES=m
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
 # CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
 # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 # CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
 # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
 CONFIG_NETFILTER_XT_MATCH_STATE=m
@@ -361,13 +391,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-# CONFIG_IP_NF_MATCH_TOS is not set
 CONFIG_IP_NF_MATCH_RECENT=m
 # CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_AH is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
@@ -378,7 +405,6 @@ CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 # CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
 # CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
@@ -389,7 +415,6 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 # CONFIG_IP_NF_TARGET_CLUSTERIP is not set
@@ -418,6 +443,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -459,6 +485,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -554,7 +581,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -562,6 +589,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -626,6 +655,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -656,6 +686,7 @@ CONFIG_ATA=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -679,6 +710,7 @@ CONFIG_PATA_IT821X=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -693,6 +725,7 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -711,7 +744,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -742,6 +774,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -754,6 +789,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -768,6 +804,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -790,7 +827,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -851,6 +887,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -924,14 +961,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -956,6 +991,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -985,6 +1021,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -994,9 +1031,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1063,6 +1102,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1076,9 +1116,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1130,12 +1171,9 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
@@ -1156,6 +1194,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1199,16 +1238,9 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1240,6 +1272,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1249,9 +1282,10 @@ CONFIG_RTC_DRV_RS5C372=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1259,6 +1293,7 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1288,12 +1323,10 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_RT is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1344,8 +1377,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1427,7 +1462,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1447,7 +1481,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1466,6 +1499,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1478,9 +1512,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1500,6 +1534,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1517,6 +1552,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1532,11 +1570,14 @@ CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 8b810d056440..7a166a39d92d 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -333,7 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -374,6 +374,7 @@ CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECD=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
 CONFIG_IDE_TASK_IOCTL=y
 CONFIG_IDE_PROC_FS=y
 
@@ -427,10 +428,129 @@ CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+CONFIG_ATA_NONSTANDARD=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -536,6 +656,7 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -783,12 +904,14 @@ CONFIG_USB_UHCI_HCD=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
 CONFIG_USB_MON=y
 
 #
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index b0266de48491..a3d52e3f2ded 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:28 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,15 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -87,11 +92,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -99,6 +106,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -121,6 +135,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -131,20 +146,22 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
 # CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
 CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
 CONFIG_TSI108_BRIDGE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 CONFIG_MPIC_WEIRD=y
 # CONFIG_PPC_I8259 is not set
@@ -156,7 +173,6 @@ CONFIG_MPIC_WEIRD=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -172,12 +188,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -197,11 +217,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -249,6 +265,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -304,6 +321,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -348,7 +366,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -356,6 +374,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -419,6 +439,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -472,6 +493,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -505,7 +527,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -521,6 +542,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -552,6 +574,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -563,6 +586,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -589,6 +615,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -602,7 +629,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -645,6 +671,7 @@ CONFIG_INPUT=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -703,6 +730,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -755,16 +783,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -790,12 +816,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -837,8 +861,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -883,7 +909,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -899,7 +924,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -913,6 +937,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -924,5 +949,49 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 5eae305215dc..0264c5757f78 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Thu Dec 13 22:40:57 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,9 +70,14 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -83,11 +89,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -95,6 +103,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -116,6 +131,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -124,16 +140,18 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_PPC_82xx=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_MPC8272_ADS=y
 # CONFIG_PQ2FADS is not set
+# CONFIG_EP8248E is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -162,12 +180,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -182,11 +204,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="mpc8272ads.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -205,6 +223,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Advanced setup
@@ -277,12 +296,13 @@ CONFIG_IPV6_SIT=y
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
@@ -292,6 +312,13 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -305,6 +332,7 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -313,6 +341,7 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -427,6 +456,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -472,6 +502,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -497,6 +528,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -507,6 +540,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -519,6 +553,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -642,6 +677,7 @@ CONFIG_DEVPORT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -684,9 +720,11 @@ CONFIG_DAB=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -710,12 +748,10 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -743,6 +779,7 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -751,8 +788,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -833,7 +872,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -851,7 +889,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -870,6 +907,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -882,8 +920,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -902,6 +940,7 @@ CONFIG_BDI_SWITCH=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -915,6 +954,9 @@ CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -934,6 +976,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index a9807f083bc4..9e0dd8201691 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Mon Jan 28 13:14:19 2008
+# Linux kernel version: 2.6.25-rc9
+# Tue Apr 15 18:07:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -28,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -65,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,17 +92,26 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -127,6 +140,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -135,8 +149,8 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -181,13 +195,18 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -206,11 +225,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -255,6 +270,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -310,6 +326,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -337,7 +354,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -346,14 +446,17 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -398,6 +501,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
 CONFIG_SATA_FSL=y
 # CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
@@ -424,6 +528,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 CONFIG_ICPLUS_PHY=y
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -434,9 +539,14 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
 CONFIG_UCC_GETH=y
+# CONFIG_UGETH_NAPI is not set
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -444,10 +554,18 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -539,18 +657,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -575,6 +692,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -602,6 +720,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -609,9 +728,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -622,6 +743,11 @@ CONFIG_WATCHDOG=y
 CONFIG_83xx_WDT=y
 
 #
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
 # Sonics Silicon Backplane
 #
 CONFIG_SSB_POSSIBLE=y
@@ -638,6 +764,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -660,26 +787,99 @@ CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
 #
-# USB Gadget Support
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_STORAGE is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
 #
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -705,12 +905,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -750,10 +948,13 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -801,6 +1002,8 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
 
 #
 # Library routines
@@ -816,10 +1019,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -845,6 +1045,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -862,6 +1063,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -876,12 +1080,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 90e38ba3832b..2075722911bb 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Mon Jan 28 13:12:07 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:08 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -17,6 +17,7 @@ CONFIG_PPC_85xx=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -29,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +97,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +111,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -131,12 +146,13 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -184,13 +200,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -209,11 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -264,6 +280,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -347,6 +364,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -395,7 +413,7 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -403,6 +421,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -468,6 +488,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -522,6 +543,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -570,6 +592,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -592,7 +615,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -620,6 +645,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -642,7 +668,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -693,6 +718,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -724,8 +750,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -773,14 +798,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -796,6 +819,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -820,6 +844,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported SAA7146 based PCI Adapters
 #
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
 
 #
 # Supported USB Adapters
@@ -905,11 +931,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_PLL is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
 # CONFIG_DVB_TUNER_QT1010 is not set
 # CONFIG_DVB_TUNER_MT2060 is not set
 # CONFIG_DVB_TUNER_MT2266 is not set
 # CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
 # Miscellaneous devices
@@ -987,6 +1015,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1012,6 +1041,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 CONFIG_SND_INTEL8X0=y
@@ -1029,6 +1059,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1058,6 +1089,10 @@ CONFIG_SND_INTEL8X0=y
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1080,6 +1115,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1093,9 +1129,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1146,10 +1183,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1175,16 +1208,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1216,6 +1242,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1225,9 +1252,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1235,6 +1263,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1260,12 +1289,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1317,8 +1344,10 @@ CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -1426,7 +1455,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1445,6 +1473,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1458,9 +1487,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1480,6 +1509,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1498,6 +1528,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1512,12 +1545,15 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 2500ef42959d..9270afe7594d 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:56 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -65,16 +66,20 @@ CONFIG_LOCALVERSION=""
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -88,11 +93,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -100,6 +107,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -122,6 +136,7 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -130,14 +145,15 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -148,7 +164,6 @@ CONFIG_MPIC=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -164,12 +179,16 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -188,10 +207,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -243,6 +259,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -311,6 +328,7 @@ CONFIG_IPV6_SIT=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -357,7 +375,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -365,6 +383,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
@@ -432,6 +452,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -462,6 +483,7 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -485,6 +507,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -518,7 +541,6 @@ CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -534,6 +556,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -574,6 +597,7 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -585,6 +609,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -610,6 +637,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -623,7 +651,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -674,6 +701,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -748,14 +776,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -771,6 +797,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -859,6 +886,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -884,6 +912,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -901,6 +930,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -929,6 +959,10 @@ CONFIG_SND_SOC_MPC8610_HPCD=y
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
 
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -942,16 +976,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -977,11 +1009,9 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1023,8 +1053,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1114,7 +1146,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1130,7 +1161,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1149,6 +1179,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1162,8 +1193,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1179,5 +1210,49 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index ff092fc4c6be..d01dcdb70bd7 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:58 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -30,6 +30,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,17 +69,21 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 # CONFIG_AUDITSYSCALL is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +97,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +111,14 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -132,6 +147,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -140,14 +156,15 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_MPC8641_HPCN=y
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -158,7 +175,6 @@ CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 CONFIG_FSL_ULI1575=y
 
 #
@@ -174,13 +190,16 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -201,7 +220,6 @@ CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -252,6 +270,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -335,6 +354,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -383,7 +403,7 @@ CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -391,6 +411,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -456,6 +478,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -486,6 +509,7 @@ CONFIG_SATA_AHCI=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_SATA_INIC162X is not set
+# CONFIG_SATA_FSL is not set
 CONFIG_PATA_ALI=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
@@ -509,6 +533,7 @@ CONFIG_PATA_ALI=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -542,7 +567,6 @@ CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -558,6 +582,7 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -579,6 +604,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -605,6 +633,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -627,7 +656,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -678,6 +706,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -707,8 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -756,14 +784,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -779,6 +805,7 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -803,6 +830,8 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 #
 # Supported SAA7146 based PCI Adapters
 #
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
 
 #
 # Supported USB Adapters
@@ -888,11 +917,13 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_PLL is not set
 # CONFIG_DVB_TDA826X is not set
 # CONFIG_DVB_TDA827X is not set
+# CONFIG_DVB_TDA18271 is not set
 # CONFIG_DVB_TUNER_QT1010 is not set
 # CONFIG_DVB_TUNER_MT2060 is not set
 # CONFIG_DVB_TUNER_MT2266 is not set
 # CONFIG_DVB_TUNER_MT2131 is not set
 # CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_XC5000 is not set
 
 #
 # Miscellaneous devices
@@ -970,6 +1001,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -995,6 +1027,7 @@ CONFIG_SND_AC97_CODEC=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 CONFIG_SND_INTEL8X0=y
@@ -1012,6 +1045,7 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 # CONFIG_SND_AC97_POWER_SAVE is not set
@@ -1041,6 +1075,10 @@ CONFIG_SND_INTEL8X0=y
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1063,6 +1101,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1076,9 +1115,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_PPC_OF=y
@@ -1129,10 +1169,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1158,16 +1194,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1199,6 +1228,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1208,9 +1238,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1218,6 +1249,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1243,12 +1275,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1300,8 +1330,10 @@ CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
 CONFIG_SYSV_FS=m
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
@@ -1393,7 +1425,6 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1410,7 +1441,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1429,6 +1459,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1442,9 +1473,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1463,6 +1494,7 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1481,6 +1513,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1495,11 +1530,14 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index a7ef231f2ab2..2d831db9ae5b 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:59 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -62,15 +63,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -82,11 +87,13 @@ CONFIG_KALLSYMS=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -94,6 +101,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -116,12 +130,13 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -129,6 +144,7 @@ CONFIG_CPM1=y
 CONFIG_MPC86XADS=y
 # CONFIG_MPC885ADS is not set
 # CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
 
 #
 # MPC8xx CPM Options
@@ -145,6 +161,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_I2C_SPI_UCODE_PATCH is not set
 # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -155,7 +172,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -172,13 +189,17 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -197,11 +218,7 @@ CONFIG_VIRT_TO_BUS=y
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE=""
 CONFIG_ISA_DMA_API=y
 
 #
@@ -246,6 +263,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -301,6 +319,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -340,6 +359,8 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -374,11 +395,8 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 CONFIG_FIXED_PHY=y
-CONFIG_FIXED_MII_10_FDX=y
-CONFIG_FIXED_MII_100_FDX=y
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -392,6 +410,8 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -402,7 +422,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -519,6 +538,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -568,15 +588,13 @@ CONFIG_USB_SUPPORT=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -604,12 +622,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -651,8 +667,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -699,7 +717,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -716,7 +733,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -730,6 +746,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -739,6 +756,49 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 22f8171d6d45..82151b9bba26 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:01 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -26,6 +26,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -63,15 +64,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -84,11 +89,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 # CONFIG_VM_EVENT_COUNTERS is not set
@@ -96,6 +103,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
@@ -117,12 +131,13 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -130,6 +145,7 @@ CONFIG_CPM1=y
 # CONFIG_MPC86XADS is not set
 CONFIG_MPC885ADS=y
 # CONFIG_PPC_EP88XC is not set
+# CONFIG_PPC_ADDER875 is not set
 
 #
 # Freescale Ethernet driver platform-specific options
@@ -153,6 +169,7 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_I2C_SPI_UCODE_PATCH is not set
 # CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -163,7 +180,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
@@ -181,6 +197,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -188,7 +205,10 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -207,11 +227,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="mpc885ads.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -308,6 +324,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -418,6 +435,7 @@ CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -452,6 +470,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -476,7 +495,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -539,6 +557,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -578,9 +597,11 @@ CONFIG_DAB=y
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -599,11 +620,9 @@ CONFIG_DAB=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -646,8 +665,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -694,7 +715,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -709,7 +729,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -728,6 +747,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
@@ -738,8 +758,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 797f0dfebde2..09f306248f2e 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan 15 10:26:10 2008
+# Linux kernel version: 2.6.25-rc6
+# Tue Mar 25 10:25:48 2008
 #
 CONFIG_PPC64=y
 
@@ -27,6 +27,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -67,17 +68,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -91,11 +94,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -103,6 +108,15 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -130,6 +144,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -140,8 +155,8 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 CONFIG_PPC_PASEMI=y
@@ -159,6 +174,7 @@ CONFIG_PPC_PASEMI_MDIO=y
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -189,7 +205,6 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 # CPU Frequency drivers
 #
 CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,16 +219,20 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=9
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
@@ -236,12 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_PPC_HAS_HASH_64K=y
 CONFIG_PPC_64K_PAGES=y
+# CONFIG_PPC_SUBPAGE_PROT is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -290,6 +309,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -346,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -441,8 +462,10 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
+CONFIG_MTD_NAND_PASEMI=y
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -465,7 +488,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -473,11 +496,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -485,6 +510,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
@@ -500,7 +526,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # PCI IDE chipsets support
 #
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
@@ -528,7 +553,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -593,6 +617,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -646,6 +671,7 @@ CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -699,7 +725,6 @@ CONFIG_DUMMY=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -715,6 +740,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -742,6 +768,7 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -754,6 +781,9 @@ CONFIG_E1000=y
 CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -779,6 +809,7 @@ CONFIG_NETDEV_10000=y
 CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -802,7 +833,6 @@ CONFIG_PASEMI_MAC=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -861,6 +891,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -886,8 +917,7 @@ CONFIG_LEGACY_PTY_COUNT=4
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_PASEMI=y
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 
@@ -897,6 +927,7 @@ CONFIG_GEN_RTC_X=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
@@ -944,13 +975,12 @@ CONFIG_I2C_PASEMI=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -975,6 +1005,7 @@ CONFIG_HWMON_VID=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1004,6 +1035,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -1013,9 +1045,11 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1183,6 +1217,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1208,6 +1243,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1225,6 +1261,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -1259,6 +1296,10 @@ CONFIG_SND_USB_USX2Y=y
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1280,6 +1321,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1293,17 +1335,14 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_SL811_HCD=y
@@ -1348,10 +1387,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1377,16 +1412,9 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -1425,6 +1453,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1434,9 +1463,10 @@ CONFIG_RTC_DRV_DS1307=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1444,6 +1474,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1471,12 +1502,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1536,8 +1565,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1629,7 +1660,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1647,11 +1677,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1670,6 +1695,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1682,9 +1708,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1710,7 +1736,9 @@ CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1729,6 +1757,9 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1743,11 +1774,14 @@ CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 5416be4419bb..fca114252ac7 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:05 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 27 13:56:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -49,6 +50,9 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -67,18 +71,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -92,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -104,6 +112,15 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -131,6 +148,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -141,16 +159,17 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
 # CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 # CONFIG_EMBEDDED6xx is not set
 CONFIG_PPC_NATIVE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -181,7 +200,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_PMAC=y
 CONFIG_PPC601_SYNC_FIX=y
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -197,12 +215,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -221,19 +243,19 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 CONFIG_PM_DEBUG=y
 # CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
 CONFIG_PM_SLEEP=y
-CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
 CONFIG_APM_EMULATION=y
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -248,7 +270,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=m
 # CONFIG_PCMCIA_DEBUG is not set
@@ -300,6 +322,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,12 +357,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 # CONFIG_NF_CONNTRACK_MARK is not set
@@ -355,6 +380,7 @@ CONFIG_NF_CONNTRACK_IRC=m
 # CONFIG_NF_CONNTRACK_SANE is not set
 # CONFIG_NF_CONNTRACK_SIP is not set
 CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
@@ -363,8 +389,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -374,14 +402,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 # CONFIG_NETFILTER_XT_MATCH_STATE is not set
@@ -399,13 +430,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
@@ -416,7 +444,6 @@ CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
 # CONFIG_NF_NAT_SNMP_BASIC is not set
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
@@ -426,7 +453,6 @@ CONFIG_NF_NAT_TFTP=m
 # CONFIG_NF_NAT_H323 is not set
 # CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 # CONFIG_IP_NF_TARGET_CLUSTERIP is not set
@@ -444,9 +470,9 @@ CONFIG_IP_DCCP_ACKVEC=y
 CONFIG_IP_DCCP_CCID2=m
 # CONFIG_IP_DCCP_CCID2_DEBUG is not set
 CONFIG_IP_DCCP_CCID3=m
-CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_IP_DCCP_CCID3_DEBUG is not set
 CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
 
 #
 # DCCP Kernel Hacking
@@ -474,6 +500,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 CONFIG_IRDA=m
 
 #
@@ -509,15 +536,6 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_KS959_DONGLE is not set
 
 #
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
 # FIR device drivers
 #
 # CONFIG_USB_IRDA is not set
@@ -563,8 +581,26 @@ CONFIG_CFG80211=m
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RCSIMPLE=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_SIMPLE is not set
 CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
 # CONFIG_MAC80211_DEBUG is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -610,7 +646,7 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -618,11 +654,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -630,6 +668,7 @@ CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_BLK_DEV_IDECS=m
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 CONFIG_BLK_DEV_IDEFLOPPY=y
 CONFIG_BLK_DEV_IDESCSI=y
@@ -641,12 +680,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -680,7 +719,6 @@ CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -754,6 +792,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -848,7 +887,6 @@ CONFIG_DUMMY=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -880,6 +918,7 @@ CONFIG_PCNET32=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -891,6 +930,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -916,6 +958,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -941,12 +984,16 @@ CONFIG_PCMCIA_HERMES=m
 # CONFIG_PCMCIA_WL3501 is not set
 CONFIG_PRISM54=m
 # CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH5K is not set
+# CONFIG_IWL4965 is not set
+# CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
 CONFIG_B43_PCI_AUTOSELECT=y
@@ -954,20 +1001,17 @@ CONFIG_B43_PCICORE_AUTOSELECT=y
 # CONFIG_B43_PCMCIA is not set
 CONFIG_B43_LEDS=y
 # CONFIG_B43_DEBUG is not set
-CONFIG_B43_DMA=y
-CONFIG_B43_PIO=y
-CONFIG_B43_DMA_AND_PIO_MODE=y
-# CONFIG_B43_DMA_MODE is not set
-# CONFIG_B43_PIO_MODE is not set
 CONFIG_B43LEGACY=m
 CONFIG_B43LEGACY_PCI_AUTOSELECT=y
 CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+CONFIG_B43LEGACY_LEDS=y
 CONFIG_B43LEGACY_DEBUG=y
 CONFIG_B43LEGACY_DMA=y
 CONFIG_B43LEGACY_PIO=y
 CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
 # CONFIG_B43LEGACY_DMA_MODE is not set
 # CONFIG_B43LEGACY_PIO_MODE is not set
+# CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
 
 #
@@ -1005,7 +1049,6 @@ CONFIG_PPP_BSDCOMP=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -1068,6 +1111,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1105,6 +1149,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -1151,14 +1196,12 @@ CONFIG_I2C_POWERMAC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1179,6 +1222,7 @@ CONFIG_APM_POWER=y
 # CONFIG_BATTERY_DS2760 is not set
 CONFIG_BATTERY_PMU=y
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1188,6 +1232,7 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=m
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_DEBUG is not set
@@ -1372,6 +1417,7 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1397,6 +1443,7 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1414,6 +1461,7 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -1461,6 +1509,10 @@ CONFIG_SND_USB_AUDIO=m
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1482,6 +1534,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1497,9 +1550,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1547,11 +1600,8 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
@@ -1572,6 +1622,7 @@ CONFIG_USB_SERIAL_IPAQ=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 CONFIG_USB_SERIAL_KEYSPAN_PDA=m
 CONFIG_USB_SERIAL_KEYSPAN=m
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -1603,7 +1654,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -1628,16 +1678,9 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1655,6 +1698,7 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1680,12 +1724,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
@@ -1733,8 +1775,10 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1828,7 +1872,6 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1850,11 +1893,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1873,6 +1912,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1885,9 +1925,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1908,7 +1948,9 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1927,6 +1969,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1942,11 +1987,14 @@ CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig
new file mode 100644
index 000000000000..9d0140e3838e
--- /dev/null
+++ b/arch/powerpc/configs/ppc40x_defconfig
@@ -0,0 +1,896 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc9
+# Tue Apr 15 08:46:44 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+CONFIG_40x=y
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+CONFIG_PPC4xx_PCI_EXPRESS=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EP405=y
+CONFIG_KILAUEA=y
+CONFIG_MAKALU=y
+CONFIG_WALNUT=y
+CONFIG_XILINX_VIRTEX_GENERIC_BOARD=y
+CONFIG_405GP=y
+CONFIG_405EX=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_II_PRO=y
+CONFIG_XILINX_VIRTEX_4_FX=y
+CONFIG_IBM405_ERR77=y
+CONFIG_IBM405_ERR51=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_OF_RTC=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+CONFIG_BOOT_LOAD=0x00400000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+CONFIG_IBM_NEW_EMAC_RGMII=y
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+CONFIG_IBM_NEW_EMAC_EMAC4=y
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=m
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 57bd775ef777..12f9b5a80220 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Fri Feb 15 21:57:35 2008
+# Linux kernel version: 2.6.25-rc6
+# Sat Apr  5 09:35:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -79,6 +79,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -113,6 +114,7 @@ CONFIG_SLUB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -143,7 +145,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_PPC4xx_PCI_EXPRESS=y
 
 #
@@ -161,12 +162,15 @@ CONFIG_TAISHAN=y
 CONFIG_KATMAI=y
 CONFIG_RAINIER=y
 CONFIG_WARP=y
+CONFIG_CANYONLANDS=y
+CONFIG_YOSEMITE=y
 CONFIG_440EP=y
 CONFIG_440EPX=y
 CONFIG_440GRX=y
 CONFIG_440GP=y
 CONFIG_440GX=y
 CONFIG_440SPe=y
+CONFIG_460EX=y
 CONFIG_IBM440EP_ERR42=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -199,7 +203,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
@@ -232,6 +235,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -678,6 +682,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -805,6 +810,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 7695a4c66e80..970282b1a004 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Fri Dec 21 14:47:29 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 27 13:56:24 2008
 #
 CONFIG_PPC64=y
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -49,7 +50,9 @@ CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
-CONFIG_PPC64_SWSUSP=y
+CONFIG_HIBERNATE_64=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 CONFIG_PPC_DCR_MMIO=y
 CONFIG_PPC_DCR=y
@@ -72,8 +75,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 # CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -82,13 +83,18 @@ CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 # CONFIG_CGROUP_NS is not set
 CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PROC_PID_CPUSET=y
 CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -102,11 +108,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -114,6 +122,15 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -141,6 +158,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -163,8 +181,8 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
@@ -176,7 +194,6 @@ CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_ELECTRA_IDE=y
 CONFIG_PPC_CELLEB=y
 # CONFIG_PPC_PS3 is not set
 CONFIG_PPC_CELL=y
@@ -193,11 +210,13 @@ CONFIG_CBE_RAS=y
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
 CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_OPROFILE_CELL=y
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_PPC_UDBG_BEAT=y
 CONFIG_XICS=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -236,7 +255,6 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 #
 CONFIG_CPU_FREQ_PMAC64=y
 CONFIG_PPC_PASEMI_CPUFREQ=y
-# CONFIG_CPM2 is not set
 CONFIG_AXON_RAM=m
 # CONFIG_FSL_ULI1575 is not set
 
@@ -252,19 +270,24 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 # CONFIG_NUMA is not set
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
@@ -294,11 +317,9 @@ CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_SMP_POSSIBLE=y
-CONFIG_HIBERNATION_SMP_POSSIBLE=y
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -313,7 +334,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
@@ -352,6 +373,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -375,7 +397,7 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -389,14 +411,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -422,8 +444,10 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -433,14 +457,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
@@ -458,13 +485,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
@@ -475,7 +499,6 @@ CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
@@ -486,7 +509,6 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
@@ -517,6 +539,7 @@ CONFIG_NET_CLS_ROUTE=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -563,7 +586,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -571,11 +594,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -583,6 +608,7 @@ CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -594,12 +620,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -634,7 +660,6 @@ CONFIG_BLK_DEV_CELLEB=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -701,6 +726,7 @@ CONFIG_SCSI_LOWLEVEL=y
 CONFIG_SCSI_IBMVSCSI=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -760,6 +786,7 @@ CONFIG_SATA_SIL24=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -776,6 +803,7 @@ CONFIG_PATA_PCMCIA=y
 # CONFIG_PATA_VIA is not set
 CONFIG_PATA_WINBOND=y
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_OF_PLATFORM is not set
 CONFIG_PATA_SCC=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -847,7 +875,6 @@ CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -863,11 +890,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_SMSC_PHY is not set
 CONFIG_BROADCOM_PHY=m
 # CONFIG_ICPLUS_PHY is not set
-CONFIG_FIXED_PHY=m
-CONFIG_FIXED_MII_10_FDX=y
-CONFIG_FIXED_MII_100_FDX=y
-# CONFIG_FIXED_MII_1000_FDX is not set
-CONFIG_FIXED_MII_AMNT=1
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
@@ -899,6 +923,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -912,6 +937,9 @@ CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -940,6 +968,7 @@ CONFIG_IXGB=m
 CONFIG_PASEMI_MAC=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -977,7 +1006,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -1056,6 +1084,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -1103,6 +1132,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 CONFIG_RAW_DRIVER=y
 CONFIG_MAX_RAW_DEVS=256
 # CONFIG_HANGCHECK_TIMER is not set
@@ -1151,13 +1181,12 @@ CONFIG_I2C_PASEMI=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1173,6 +1202,7 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1337,6 +1367,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
 # CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
@@ -1362,6 +1393,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_HDA_INTEL is not set
 # CONFIG_SND_HDSP is not set
 # CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
 # CONFIG_SND_ICE1712 is not set
 # CONFIG_SND_ICE1724 is not set
 # CONFIG_SND_INTEL8X0 is not set
@@ -1379,6 +1411,7 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_TRIDENT is not set
 # CONFIG_SND_VIA82XX is not set
 # CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
 
@@ -1426,6 +1459,10 @@ CONFIG_SND_AOA_SOUNDBUS_I2S=m
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -1447,6 +1484,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1460,10 +1498,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 CONFIG_USB_EHCI_TT_NEWSCHED=y
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1512,10 +1550,6 @@ CONFIG_USB_STORAGE=m
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1541,16 +1575,9 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
@@ -1562,6 +1589,7 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1576,8 +1604,13 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_PASEMI=y
+# CONFIG_EDAC_CELL is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
@@ -1604,6 +1637,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1613,9 +1647,10 @@ CONFIG_RTC_DRV_DS1307=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1623,6 +1658,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1665,12 +1701,10 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
@@ -1719,8 +1753,10 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1821,7 +1857,6 @@ CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1835,6 +1870,8 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
@@ -1843,11 +1880,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1866,6 +1899,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1878,9 +1912,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
@@ -1908,7 +1942,9 @@ CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1921,12 +1957,15 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1942,11 +1981,13 @@ CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 # CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index a3bfbb65a933..1383eb696a20 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Thu Dec 13 22:39:18 2007
+# Linux kernel version: 2.6.25-rc6
+# Mon Mar 24 08:48:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -69,9 +70,14 @@ CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
@@ -84,11 +90,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -96,6 +104,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -117,6 +132,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -125,15 +141,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_PPC_82xx=y
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_MPC8272_ADS is not set
 CONFIG_PQ2FADS=y
+# CONFIG_EP8248E is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -162,12 +180,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
@@ -182,11 +204,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 CONFIG_SECCOMP=y
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="pq2fads.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -206,6 +224,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 
 #
 # Advanced setup
@@ -278,12 +297,13 @@ CONFIG_IPV6_SIT=y
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
 # CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
@@ -293,6 +313,13 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -306,6 +333,7 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -314,6 +342,7 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -431,17 +460,20 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 CONFIG_IDE_PROC_FS=y
@@ -455,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # PCI IDE chipsets support
 #
-# CONFIG_IDEPCI_PCIBUS_ORDER is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_AEC62XX is not set
 # CONFIG_BLK_DEV_ALI15X3 is not set
@@ -481,7 +512,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -529,6 +559,7 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
 CONFIG_NET_ETHERNET=y
@@ -554,6 +585,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_R8169 is not set
@@ -564,6 +597,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -576,6 +610,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -700,6 +735,7 @@ CONFIG_DEVPORT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -749,10 +785,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
@@ -776,10 +808,13 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -803,12 +838,10 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -836,6 +869,7 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -844,8 +878,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -926,7 +962,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -944,7 +979,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -963,6 +997,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -975,8 +1010,8 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -995,6 +1030,7 @@ CONFIG_BDI_SWITCH=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1008,6 +1044,9 @@ CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_ECB=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1027,6 +1066,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index 46b2579d38b1..f9121685f11a 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:11 2007
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -31,6 +31,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -68,15 +69,23 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 # CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,6 +112,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -123,6 +141,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -133,20 +152,22 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
 # CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 CONFIG_PPC_PRPMC2800=y
 CONFIG_MV64X60=y
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -158,7 +179,6 @@ CONFIG_MV64X60=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -174,12 +194,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -199,11 +223,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="prpmc2800.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -253,6 +273,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -308,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -341,6 +363,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -428,7 +451,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -436,11 +459,13 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -457,12 +482,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -493,7 +518,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -559,6 +583,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -612,6 +637,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -626,6 +652,7 @@ CONFIG_SATA_MV=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
@@ -646,7 +673,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
@@ -662,6 +688,7 @@ CONFIG_PHYLIB=y
 # CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
@@ -693,6 +720,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -706,6 +734,9 @@ CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -731,6 +762,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -753,7 +785,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -802,6 +833,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -823,8 +855,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -872,14 +903,12 @@ CONFIG_I2C_MV64XXX=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -904,6 +933,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -933,6 +963,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
@@ -942,9 +973,11 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1009,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1022,9 +1056,9 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1061,10 +1095,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1090,16 +1120,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -1131,6 +1154,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -1140,9 +1164,10 @@ CONFIG_RTC_DRV_MAX6900=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -1150,6 +1175,7 @@ CONFIG_RTC_DRV_MAX6900=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -1175,12 +1201,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1223,8 +1247,10 @@ CONFIG_TMPFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1269,7 +1295,6 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1285,7 +1310,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1299,6 +1323,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SAMPLES is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1310,5 +1335,49 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7994955c29d3..7a64c564f6e6 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc8
-# Wed Jan 16 14:31:21 2008
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 20 11:07:04 2008
 #
 CONFIG_PPC64=y
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,7 +52,6 @@ CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
-# CONFIG_PPC_OF_PLATFORM_PCI is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -68,17 +68,21 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -92,17 +96,27 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -131,6 +145,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -141,8 +156,8 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -173,6 +188,7 @@ CONFIG_PPC_CELL=y
 CONFIG_SPU_FS=y
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
+# CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -184,7 +200,6 @@ CONFIG_SPU_BASE=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -199,15 +214,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_IRQ_ALL_CPUS is not set
@@ -241,7 +260,6 @@ CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -271,6 +289,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -338,6 +357,7 @@ CONFIG_IPV6_SIT=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 CONFIG_BT=m
 CONFIG_BT_L2CAP=m
@@ -405,11 +425,13 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65535
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -472,7 +494,9 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
 CONFIG_GELIC_NET=y
+CONFIG_GELIC_WIRELESS=y
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -482,9 +506,8 @@ CONFIG_GELIC_NET=y
 CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_HOSTAP is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
 
 #
 # USB Network Adapters
@@ -507,7 +530,6 @@ CONFIG_USB_NET_MCS7830=m
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -606,6 +628,7 @@ CONFIG_GEN_RTC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -742,6 +765,10 @@ CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 #
 
 #
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
@@ -769,6 +796,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -782,10 +810,10 @@ CONFIG_USB_DEVICEFS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -833,10 +861,6 @@ CONFIG_USB_MON=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -862,19 +886,13 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -900,8 +918,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 CONFIG_QUOTA=y
@@ -910,7 +927,6 @@ CONFIG_PRINT_QUOTA_WARNING=y
 # CONFIG_QFMT_V1 is not set
 CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
@@ -959,8 +975,10 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1036,7 +1054,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1048,15 +1065,12 @@ CONFIG_BITREVERSE=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_KPROBES is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1087,9 +1101,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
@@ -1108,7 +1122,9 @@ CONFIG_IRQSTACKS=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
@@ -1120,12 +1136,15 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1140,11 +1159,13 @@ CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SALSA20=m
 # CONFIG_CRYPTO_DEFLATE is not set
 CONFIG_CRYPTO_MICHAEL_MIC=m
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_LZO=m
 CONFIG_CRYPTO_HW=y
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 92bbf51ad4f0..3e2593c60b12 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:49:15 2007
+# Linux kernel version: 2.6.25-rc6
+# Thu Mar 27 13:56:28 2008
 #
 CONFIG_PPC64=y
 
@@ -28,6 +28,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -71,8 +72,6 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_AUDIT_TREE=y
@@ -83,13 +82,18 @@ CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
 CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_FAIR_USER_SCHED is not set
-CONFIG_FAIR_CGROUP_SCHED=y
+# CONFIG_GROUP_SCHED is not set
 CONFIG_CGROUP_CPUACCT=y
+# CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_PROC_PID_CPUSET=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -103,11 +107,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -115,6 +121,16 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -142,6 +158,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -156,8 +173,8 @@ CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -170,6 +187,7 @@ CONFIG_LPARCFG=y
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
@@ -186,7 +204,6 @@ CONFIG_IBMEBUS=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -201,19 +218,24 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
+# CONFIG_PHYP_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_NUMA=y
 CONFIG_NODES_SHIFT=4
@@ -245,9 +267,7 @@ CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-CONFIG_SUSPEND_SMP_POSSIBLE=y
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -262,7 +282,7 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_PCIEPORTBUS is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 CONFIG_HOTPLUG_PCI=m
@@ -288,6 +308,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -322,14 +343,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK=m
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
 CONFIG_NF_CONNTRACK=m
 CONFIG_NF_CT_ACCT=y
 CONFIG_NF_CONNTRACK_MARK=y
@@ -351,6 +372,7 @@ CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
@@ -361,14 +383,17 @@ CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
 CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
@@ -386,13 +411,10 @@ CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
@@ -403,7 +425,6 @@ CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
@@ -439,6 +460,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -493,7 +515,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -501,16 +523,19 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -522,12 +547,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -558,7 +583,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -627,6 +651,7 @@ CONFIG_SCSI_IBMVSCSI=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -685,6 +710,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -699,6 +725,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 CONFIG_PATA_WINBOND=y
+# CONFIG_PATA_PLATFORM is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=y
@@ -737,7 +764,6 @@ CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -769,6 +795,7 @@ CONFIG_E100=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -783,6 +810,9 @@ CONFIG_E1000=y
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -811,6 +841,7 @@ CONFIG_S2IO=m
 # CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 CONFIG_TR=y
 CONFIG_IBMOL=y
 # CONFIG_3C359 is not set
@@ -847,7 +878,6 @@ CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
 CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -927,6 +957,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -951,7 +982,6 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
 CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
@@ -1009,13 +1039,12 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1031,6 +1060,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1166,6 +1196,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1179,9 +1210,9 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -1230,10 +1261,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1259,16 +1286,9 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
@@ -1281,6 +1301,7 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_EHCA=m
 # CONFIG_INFINIBAND_AMSO1100 is not set
 # CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
 CONFIG_INFINIBAND_IPOIB=m
 # CONFIG_INFINIBAND_IPOIB_CM is not set
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
@@ -1289,6 +1310,7 @@ CONFIG_INFINIBAND_SRP=m
 # CONFIG_INFINIBAND_ISER is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 
 #
@@ -1334,12 +1356,10 @@ CONFIG_XFS_POSIX_ACL=y
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
@@ -1388,8 +1408,10 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1473,7 +1495,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1487,6 +1508,8 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
@@ -1495,11 +1518,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_KPROBES=y
-CONFIG_MARKERS=y
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1518,6 +1537,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1530,9 +1550,10 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -1557,7 +1578,9 @@ CONFIG_VIRQ_DEBUG=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1570,12 +1593,15 @@ CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_CCM=m
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1591,11 +1617,13 @@ CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_ANUBIS=m
 # CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SALSA20=m
 CONFIG_CRYPTO_DEFLATE=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 CONFIG_CRYPTO_TEST=m
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_LZO=m
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
new file mode 100644
index 000000000000..3180125aa6c4
--- /dev/null
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -0,0 +1,1342 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Thu Apr 10 18:03:25 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_MPC8641_HPCN is not set
+CONFIG_SBC8641D=y
+# CONFIG_MPC8610_HPCD is not set
+CONFIG_MPC8641=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+# CONFIG_MD_RAID456 is not set
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+# CONFIG_DM_MULTIPATH is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+# CONFIG_ATM_TCP is not set
+# CONFIG_ATM_LANAI is not set
+# CONFIG_ATM_ENI is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+# CONFIG_ATM_NICSTAR is not set
+# CONFIG_ATM_IDT77252 is not set
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_HE is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+# CONFIG_REISERFS_FS_SECURITY is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFS_DIRECTIO=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_DEBUGGER=y
+# CONFIG_XMON is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_TEST=m
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index a034a5e452ef..fdbfd39a3aca 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc6
-# Tue Jan  8 09:33:54 2008
+# Linux kernel version: 2.6.25-rc7
+# Mon Mar 31 11:37:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -66,17 +67,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -87,11 +90,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -99,6 +104,13 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -126,6 +138,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
@@ -136,10 +149,10 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
 # CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
-# CONFIG_PPC_EFIKA is not set
-# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -153,6 +166,7 @@ CONFIG_STORCENTER=y
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -164,7 +178,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -180,12 +193,16 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -206,11 +223,7 @@ CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_HIBERNATION_UP_POSSIBLE=y
 # CONFIG_SECCOMP is not set
-CONFIG_WANT_DEVICE_TREE=y
-CONFIG_DEVICE_TREE="storcenter.dts"
 CONFIG_ISA_DMA_API=y
 
 #
@@ -310,6 +323,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -343,6 +357,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_OF_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -438,12 +453,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -460,12 +477,12 @@ CONFIG_IDE_PROC_FS=y
 #
 CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
@@ -495,7 +512,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -563,6 +579,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -603,7 +620,6 @@ CONFIG_DUMMY=m
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
@@ -611,6 +627,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -623,6 +642,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -649,7 +669,6 @@ CONFIG_R8169=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -672,6 +691,7 @@ CONFIG_R8169=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,8 +717,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
+# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -746,14 +765,12 @@ CONFIG_I2C_MPC=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -769,6 +786,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -814,6 +832,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -827,9 +846,10 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
@@ -877,10 +897,6 @@ CONFIG_USB_STORAGE=y
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -906,16 +922,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
@@ -947,6 +956,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
 
 #
 # SPI RTC drivers
@@ -956,9 +966,10 @@ CONFIG_RTC_DRV_DS1307=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -966,6 +977,7 @@ CONFIG_RTC_DRV_DS1307=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_DMADEVICES is not set
 
 #
 # Userspace I/O
@@ -995,12 +1007,10 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_RT is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1053,8 +1063,10 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
@@ -1121,7 +1133,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
@@ -1139,9 +1150,6 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1155,6 +1163,7 @@ CONFIG_INSTRUMENTATION=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index c1baf9d5903f..ce1e8d24e747 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,7 +12,7 @@ CFLAGS_prom_init.o      += -fPIC
 CFLAGS_btext.o		+= -fPIC
 endif
 
-obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
+obj-y				:= cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
 				   init_task.o process.o systbl.o idle.o \
 				   signal.o
@@ -67,6 +67,7 @@ obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_PPC_UDBG_16550)	+= legacy_serial.o udbg_16550.o
+obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 
 pci64-$(CONFIG_PPC64)		+= pci_dn.o isa-bridge.o
 obj-$(CONFIG_PCI)		+= pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 4b749c416464..292c6d8db0e1 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -26,8 +26,6 @@
 #ifdef CONFIG_PPC64
 #include <linux/time.h>
 #include <linux/hardirq.h>
-#else
-#include <linux/ptrace.h>
 #endif
 
 #include <asm/io.h>
@@ -46,6 +44,9 @@
 #include <asm/mmu.h>
 #include <asm/hvcall.h>
 #endif
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/iseries/alpaca.h>
+#endif
 
 #define DEFINE(sym, val) \
 	asm volatile("\n->" #sym " %0 " #val : : "i" (val))
@@ -60,7 +61,6 @@ int main(void)
 	DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
 #else
 	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
 #endif /* CONFIG_PPC64 */
 
 	DEFINE(KSP, offsetof(struct thread_struct, ksp));
@@ -80,7 +80,6 @@ int main(void)
 	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
 	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
-	DEFINE(PT_PTRACED, PT_PTRACED);
 #endif
 #ifdef CONFIG_SPE
 	DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0]));
@@ -325,6 +324,9 @@ int main(void)
 	DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET));
 	DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START));
 	DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START));
+
+	/* alpaca */
+	DEFINE(ALPACA_SIZE, sizeof(struct alpaca));
 #endif
 
 	DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE);
diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c
index 80e2eef05b2e..9f9377745490 100644
--- a/arch/powerpc/kernel/btext.c
+++ b/arch/powerpc/kernel/btext.c
@@ -7,6 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/lmb.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
@@ -15,7 +16,7 @@
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/processor.h>
 #include <asm/udbg.h>
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index 6250443ab9c9..5465e8de0e61 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -3,7 +3,7 @@
  * Valentine Barshak <vbarshak@ru.mvista.com>
  * MontaVista Software, Inc (c) 2007
  *
- * Based on cpu_setup_6xx code by 
+ * Based on cpu_setup_6xx code by
  * Benjamin Herrenschmidt <benh@kernel.crashing.org>
  *
  * This program is free software; you can redistribute it and/or
@@ -32,6 +32,9 @@ _GLOBAL(__setup_cpu_440grx)
 	bl	__fixup_440A_mcheck
 	mtlr	r4
 	blr
+_GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
+	b	__init_fpu_44x
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 2a8f5cc5184f..26ffb44e2701 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -36,6 +36,8 @@ extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -1397,6 +1399,30 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 460EX */
+		.pvr_mask		= 0xffff0002,
+		.pvr_value		= 0x13020002,
+		.cpu_name		= "460EX",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460ex,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
+	{ /* 460GT */
+		.pvr_mask		= 0xffff0002,
+		.pvr_value		= 0x13020000,
+		.cpu_name		= "460GT",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
+		.machine_check		= machine_check_440A,
+		.platform		= "ppc440",
+	},
 #endif /* CONFIG_44x */
 #ifdef CONFIG_FSL_BOOKE
 #ifdef CONFIG_E200
@@ -1512,7 +1538,7 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
-			/* ppc64 and booke expect identify_cpu to also call 
+			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
 			 * that at a later time, for now, just use #ifdef.
 			 * we also don't need to PTRRELOC the function pointer
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 571132ed12c1..eae401de3f76 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -24,12 +24,13 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
+#include <linux/lmb.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>
 #include <asm/kexec.h>
 #include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/firmware.h>
 #include <asm/smp.h>
 #include <asm/system.h>
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 29ff77c468ac..9ee3c5278db0 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -13,8 +13,9 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
 #include <asm/kdump.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/firmware.h>
 #include <asm/uaccess.h>
 
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 69a91bd46115..84c868633068 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -110,9 +110,9 @@ transfer_to_handler:
 	stw	r11,PT_REGS(r12)
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 	/* Check to see if the dbcr0 register is set up to debug.  Use the
-	   single-step bit to do this. */
+	   internal debug mode bit to do this. */
 	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IC@h
+	andis.	r12,r12,DBCR0_IDM@h
 	beq+	3f
 	/* From user and task is ptraced - load up global dbcr0 */
 	li	r12,-1			/* clear all pending debug events */
@@ -120,6 +120,12 @@ transfer_to_handler:
 	lis	r11,global_dbcr0@ha
 	tophys(r11,r11)
 	addi	r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r9,TI_CPU(r9)
+	slwi	r9,r9,3
+	add	r11,r11,r9
+#endif
 	lwz	r12,0(r11)
 	mtspr	SPRN_DBCR0,r12
 	lwz	r12,4(r11)
@@ -238,10 +244,10 @@ ret_from_syscall:
 	stw	r11,_CCR(r1)
 syscall_exit_cont:
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* If the process has its own DBCR0 value, load it up.  The single
-	   step bit tells us that dbcr0 should be loaded. */
+	/* If the process has its own DBCR0 value, load it up.  The internal
+	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 #ifdef CONFIG_44x
@@ -666,10 +672,10 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 
 restore_user:
 #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* Check whether this process has its own DBCR0 value.  The single
-	   step bit tells us that dbcr0 should be loaded. */
+	/* Check whether this process has its own DBCR0 value.  The internal
+	   debug mode bit tells us that dbcr0 should be loaded. */
 	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
+	andis.	r10,r0,DBCR0_IDM@h
 	bnel-	load_dbcr0
 #endif
 
@@ -879,6 +885,12 @@ load_dbcr0:
 	mfspr	r10,SPRN_DBCR0
 	lis	r11,global_dbcr0@ha
 	addi	r11,r11,global_dbcr0@l
+#ifdef CONFIG_SMP
+	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r9,TI_CPU(r9)
+	slwi	r9,r9,3
+	add	r11,r11,r9
+#endif
 	stw	r10,0(r11)
 	mtspr	SPRN_DBCR0,r0
 	lwz	r10,4(r11)
@@ -891,7 +903,7 @@ load_dbcr0:
 	.section .bss
 	.align	4
 global_dbcr0:
-	.space	8
+	.space	8*NR_CPUS
 	.previous
 #endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
 
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 148a3547c9aa..c0db5b769e55 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -29,6 +29,8 @@
 #include <asm/cputable.h>
 #include <asm/firmware.h>
 #include <asm/bug.h>
+#include <asm/ptrace.h>
+#include <asm/irqflags.h>
 
 /*
  * System calls.
@@ -39,7 +41,7 @@
 
 /* This value is used to mark exception frames on the stack. */
 exception_marker:
-	.tc	ID_72656773_68657265[TC],0x7265677368657265
+	.tc	ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
 
 	.section	".text"
 	.align 7
@@ -88,6 +90,14 @@ system_call_common:
 	addi	r9,r1,STACK_FRAME_OVERHEAD
 	ld	r11,exception_marker@toc(r2)
 	std	r11,-16(r9)		/* "regshere" marker */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	.trace_hardirqs_on
+	REST_GPR(0,r1)
+	REST_4GPRS(3,r1)
+	REST_2GPRS(7,r1)
+	addi	r9,r1,STACK_FRAME_OVERHEAD
+	ld	r12,_MSR(r1)
+#endif /* CONFIG_TRACE_IRQFLAGS */
 	li	r10,1
 	stb	r10,PACASOFTIRQEN(r13)
 	stb	r10,PACAHARDIRQEN(r13)
@@ -102,7 +112,7 @@ BEGIN_FW_FTR_SECTION
 	b	hardware_interrupt_entry
 2:
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
+#endif /* CONFIG_PPC_ISERIES */
 	mfmsr	r11
 	ori	r11,r11,MSR_EE
 	mtmsrd	r11,1
@@ -504,6 +514,10 @@ BEGIN_FW_FTR_SECTION
 
 	li	r3,0
 	stb	r3,PACASOFTIRQEN(r13)	/* ensure we are soft-disabled */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	.trace_hardirqs_off
+	mfmsr	r10
+#endif
 	ori	r10,r10,MSR_EE
 	mtmsrd	r10			/* hard-enable again */
 	addi	r3,r1,STACK_FRAME_OVERHEAD
@@ -512,7 +526,7 @@ BEGIN_FW_FTR_SECTION
 4:
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
-	stb	r5,PACASOFTIRQEN(r13)
+	TRACE_AND_RESTORE_IRQ(r5);
 
 	/* extract EE bit and use it to restore paca->hard_enabled */
 	ld	r3,_MSR(r1)
@@ -580,6 +594,16 @@ do_work:
 	bne	restore
 	/* here we are preempting the current task */
 1:
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	.trace_hardirqs_on
+	/* Note: we just clobbered r10 which used to contain the previous
+	 * MSR before the hard-disabling done by the caller of do_work.
+	 * We don't have that value anymore, but it doesn't matter as
+	 * we will hard-enable unconditionally, we can just reload the
+	 * current MSR into r10
+	 */
+	mfmsr	r10
+#endif /* CONFIG_TRACE_IRQFLAGS */
 	li	r0,1
 	stb	r0,PACASOFTIRQEN(r13)
 	stb	r0,PACAHARDIRQEN(r13)
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 0f4fac512020..785af9b56591 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -30,6 +30,7 @@
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
 
 /* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
 #define LOAD_BAT(n, reg, RA, RB)	\
@@ -268,8 +269,8 @@ __secondary_hold_acknowledge:
 	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
 	MTMSRD(r10);			/* (except for mach check in rtas) */ \
 	stw	r0,GPR0(r11);	\
-	lis	r10,0x7265;		/* put exception frame marker */ \
-	addi	r10,r10,0x6773;	\
+	lis	r10,STACK_FRAME_REGS_MARKER@ha; /* exception frame marker */ \
+	addi	r10,r10,STACK_FRAME_REGS_MARKER@l; \
 	stw	r10,8(r11);	\
 	SAVE_4GPRS(3, r11);	\
 	SAVE_2GPRS(7, r11)
@@ -763,23 +764,6 @@ load_up_altivec:
 	b	fast_exception_return
 
 /*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
-	lwz	r3,_MSR(r1)
-	oris	r3,r3,MSR_VEC@h
-	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
-	lis	r3,87f@h
-	ori	r3,r3,87f@l
-	mr	r4,r2		/* current */
-	lwz	r5,_NIP(r1)
-	bl	printk
-	b	ret_from_except
-87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
-	.align	4,0
-
-/*
  * giveup_altivec(tsk)
  * Disable AltiVec for the task given as the argument,
  * and save the AltiVec registers in its thread_struct.
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index ad071a146a8d..b84ec6a2fc94 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -211,7 +211,7 @@ skpinv:	addi	r4,r4,1				/* Increment */
 	SET_IVOR(12, WatchdogTimer);
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
+	SET_IVOR(15, DebugCrit);
 
 	/* Establish the interrupt vector base */
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
@@ -578,7 +578,7 @@ interrupt_base:
 	b	InstructionStorage
 
 	/* Debug Interrupt */
-	DEBUG_EXCEPTION
+	DEBUG_CRIT_EXCEPTION
 
 /*
  * Local functions
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 11b4f6d9ffce..215973a2c8d5 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -36,8 +36,7 @@
 #include <asm/firmware.h>
 #include <asm/page_64.h>
 #include <asm/exception.h>
-
-#define DO_SOFT_DISABLE
+#include <asm/irqflags.h>
 
 /*
  * We layout physical memory as follows:
@@ -450,8 +449,8 @@ bad_stack:
  */
 fast_exc_return_irq:			/* restores irq state too */
 	ld	r3,SOFTE(r1)
+	TRACE_AND_RESTORE_IRQ(r3);
 	ld	r12,_MSR(r1)
-	stb	r3,PACASOFTIRQEN(r13)	/* restore paca->soft_enabled */
 	rldicl	r4,r12,49,63		/* get MSR_EE to LSB */
 	stb	r4,PACAHARDIRQEN(r13)	/* restore paca->hard_enabled */
 	b	1f
@@ -621,7 +620,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 	mtlr	r10
 
 	andi.	r10,r12,MSR_RI	/* check for unrecoverable exception */
-	beq-	unrecov_slb
+	beq-	2f
 
 .machine	push
 .machine	"power4"
@@ -643,6 +642,22 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 	rfid
 	b	.	/* prevent speculative execution */
 
+2:
+#ifdef CONFIG_PPC_ISERIES
+BEGIN_FW_FTR_SECTION
+	b	unrecov_slb
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#endif /* CONFIG_PPC_ISERIES */
+	mfspr	r11,SPRN_SRR0
+	clrrdi	r10,r13,32
+	LOAD_HANDLER(r10,unrecov_slb)
+	mtspr	SPRN_SRR0,r10
+	mfmsr	r10
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI
+	mtspr	SPRN_SRR1,r10
+	rfid
+	b	.
+
 unrecov_slb:
 	EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB)
 	DISABLE_INTS
@@ -808,7 +823,7 @@ _STATIC(load_up_altivec)
  * Hash table stuff
  */
 	.align	7
-_GLOBAL(do_hash_page)
+_STATIC(do_hash_page)
 	std	r3,_DAR(r1)
 	std	r4,_DSISR(r1)
 
@@ -820,6 +835,27 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 
 	/*
+	 * On iSeries, we soft-disable interrupts here, then
+	 * hard-enable interrupts so that the hash_page code can spin on
+	 * the hash_table_lock without problems on a shared processor.
+	 */
+	DISABLE_INTS
+
+	/*
+	 * Currently, trace_hardirqs_off() will be called by DISABLE_INTS
+	 * and will clobber volatile registers when irq tracing is enabled
+	 * so we need to reload them. It may be possible to be smarter here
+	 * and move the irq tracing elsewhere but let's keep it simple for
+	 * now
+	 */
+#ifdef CONFIG_TRACE_IRQFLAGS
+	ld	r3,_DAR(r1)
+	ld	r4,_DSISR(r1)
+	ld	r5,_TRAP(r1)
+	ld	r12,_MSR(r1)
+	clrrdi	r5,r5,4
+#endif /* CONFIG_TRACE_IRQFLAGS */
+	/*
 	 * We need to set the _PAGE_USER bit if MSR_PR is set or if we are
 	 * accessing a userspace segment (even from the kernel). We assume
 	 * kernel addresses always have the high bit set.
@@ -832,13 +868,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	rlwimi	r4,r5,22+2,31-2,31-2	/* Set _PAGE_EXEC if trap is 0x400 */
 
 	/*
-	 * On iSeries, we soft-disable interrupts here, then
-	 * hard-enable interrupts so that the hash_page code can spin on
-	 * the hash_table_lock without problems on a shared processor.
-	 */
-	DISABLE_INTS
-
-	/*
 	 * r3 contains the faulting address
 	 * r4 contains the required access permissions
 	 * r5 contains the trap number
@@ -848,7 +877,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
 	bl	.hash_page		/* build HPTE if possible */
 	cmpdi	r3,0			/* see if hash_page succeeded */
 
-#ifdef DO_SOFT_DISABLE
 BEGIN_FW_FTR_SECTION
 	/*
 	 * If we had interrupts soft-enabled at the point where the
@@ -860,7 +888,7 @@ BEGIN_FW_FTR_SECTION
 	 */
 	beq	13f
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
+
 BEGIN_FW_FTR_SECTION
 	/*
 	 * Here we have interrupts hard-disabled, so it is sufficient
@@ -874,11 +902,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 	/*
 	 * hash_page couldn't handle it, set soft interrupt enable back
-	 * to what it was before the trap.  Note that .local_irq_restore
+	 * to what it was before the trap.  Note that .raw_local_irq_restore
 	 * handles any interrupts pending at this point.
 	 */
 	ld	r3,SOFTE(r1)
-	bl	.local_irq_restore
+	TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
+	bl	.raw_local_irq_restore
 	b	11f
 
 /* Here we have a page fault that hash_page can't handle. */
@@ -1387,12 +1416,14 @@ __secondary_start:
 #ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
 	ori	r4,r4,MSR_EE
+	li	r8,1
+	stb	r8,PACAHARDIRQEN(r13)
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
 BEGIN_FW_FTR_SECTION
-	stb	r7,PACASOFTIRQEN(r13)
 	stb	r7,PACAHARDIRQEN(r13)
 END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+	stb	r7,PACASOFTIRQEN(r13)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -1475,6 +1506,10 @@ _INIT_STATIC(start_here_multiplatform)
 	addi	r2,r2,0x4000
 	add	r2,r2,r26
 
+	/* Set initial ptr to current */
+	LOAD_REG_IMMEDIATE(r4, init_task)
+	std	r4,PACACURRENT(r13)
+
 	/* Do very early kernel initializations, including initial hash table,
 	 * stab and slb setup before we turn on relocation.	*/
 
@@ -1503,10 +1538,6 @@ _INIT_GLOBAL(start_here_common)
 	li	r0,0
 	stdu	r0,-STACK_FRAME_OVERHEAD(r1)
 
-	/* ptr to current */
-	LOAD_REG_IMMEDIATE(r4, init_task)
-	std	r4,PACACURRENT(r13)
-
 	/* Load the TOC */
 	ld	r2,PACATOC(r13)
 	std	r1,PACAKSAVE(r13)
@@ -1520,15 +1551,14 @@ _INIT_GLOBAL(start_here_common)
 #ifdef CONFIG_PPC_ISERIES
 BEGIN_FW_FTR_SECTION
 	mfmsr	r5
-	ori	r5,r5,MSR_EE		/* Hard Enabled */
+	ori	r5,r5,MSR_EE		/* Hard Enabled on iSeries*/
 	mtmsrd	r5
+	li	r5,1
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 #endif
-BEGIN_FW_FTR_SECTION
-	stb	r5,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
+	stb	r5,PACAHARDIRQEN(r13)	/* Hard Disabled on others */
 
-	bl .start_kernel
+	bl	.start_kernel
 
 	/* Not reached */
 	BUG_OPCODE
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index f7458396cd7c..3c9452d4308b 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -332,8 +332,18 @@ InstructionTLBMiss:
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	stw	r10, 0(r11)
+4:
+#else
 	ori	r10, r10, _PAGE_ACCESSED
 	stw	r10, 0(r11)
+#endif
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 21, 22 and 28 must be clear.
@@ -398,8 +408,17 @@ DataStoreTLBMiss:
 	DO_8xx_CPU6(0x3b80, r3)
 	mtspr	SPRN_MD_TWC, r11
 
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
 	ori	r10, r10, _PAGE_ACCESSED
+4:
+	/* and update pte in table */
+#else
+	ori	r10, r10, _PAGE_ACCESSED
+#endif
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
 	stw	r10, 0(r11)
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
@@ -507,7 +526,16 @@ DataTLBError:
 
 	/* Update 'changed', among others.
 	*/
+#ifdef CONFIG_SWAP
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+4:
+#else
 	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
 	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
 	stw	r10, 0(r11)		/* and update pte in table */
 
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index ba9393f8e77a..aefafc6330c9 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -56,8 +56,17 @@
  * is necessary since the MMU is always on, for Book-E parts, and the stacks
  * are offset from KERNELBASE.
  *
+ * There is some space optimization to be had here if desired.  However
+ * to allow for a common kernel with support for debug exceptions either
+ * going to critical or their own debug level we aren't currently
+ * providing configurations that micro-optimize space usage.
  */
-#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
+#ifdef CONFIG_44x
+#define NUM_EXCEPTION_LVLS	2
+#else
+#define NUM_EXCEPTION_LVLS	3
+#endif
+#define BOOKE_EXCEPTION_STACK_SIZE	(4096 * NUM_EXCEPTION_LVLS)
 
 /* CRIT_SPRG only used in critical exception handling */
 #define CRIT_SPRG	SPRN_SPRG2
@@ -68,7 +77,7 @@
 #define CRIT_STACK_TOP		(exception_stack_top)
 
 /* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 4096)
+#define DEBUG_STACK_TOP		(exception_stack_top - 8192)
 #define DEBUG_SPRG		SPRN_SPRG6W
 
 #ifdef CONFIG_SMP
@@ -212,9 +221,8 @@ label:
  * save (and later restore) the MSR via SPRN_CSRR1, which will still have
  * the MSR_DE bit set.
  */
-#ifdef CONFIG_E200
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
+#define DEBUG_DEBUG_EXCEPTION						      \
+	START_EXCEPTION(DebugDebug);					      \
 	DEBUG_EXCEPTION_PROLOG;						      \
 									      \
 	/*								      \
@@ -234,8 +242,8 @@ label:
 	cmplw	r12,r10;						      \
 	blt+	2f;			/* addr below exception vectors */    \
 									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
+	lis	r10,DebugDebug@h;					      \
+	ori	r10,r10,DebugDebug@l;					      \
 	cmplw	r12,r10;						      \
 	bgt+	2f;			/* addr above exception vectors */    \
 									      \
@@ -265,9 +273,9 @@ label:
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
-#else
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
+
+#define DEBUG_CRIT_EXCEPTION						      \
+	START_EXCEPTION(DebugCrit);					      \
 	CRITICAL_EXCEPTION_PROLOG;					      \
 									      \
 	/*								      \
@@ -287,8 +295,8 @@ label:
 	cmplw	r12,r10;						      \
 	blt+	2f;			/* addr below exception vectors */    \
 									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
+	lis	r10,DebugCrit@h;						      \
+	ori	r10,r10,DebugCrit@l;					      \
 	cmplw	r12,r10;						      \
 	bgt+	2f;			/* addr above exception vectors */    \
 									      \
@@ -318,7 +326,6 @@ label:
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-#endif
 
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
 	START_EXCEPTION(InstructionStorage)				      \
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index d9cc2c288d9e..4ff744143566 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -68,7 +68,9 @@ _ENTRY(_start);
 	mr	r29,r5
 	mr	r28,r6
 	mr	r27,r7
+	li	r25,0		/* phys kernel start (low) */
 	li	r24,0		/* CPU number */
+	li	r23,0		/* phys kernel start (high) */
 
 /* We try to not make any assumptions about how the boot loader
  * setup or used the TLBs.  We invalidate all mappings from the
@@ -167,7 +169,28 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	mtspr	SPRN_MAS0,r7
 	tlbre
 
-	/* Just modify the entry ID, EPN and RPN for the temp mapping */
+	/* grab and fixup the RPN */
+	mfspr	r6,SPRN_MAS1	/* extract MAS1[SIZE] */
+	rlwinm	r6,r6,25,27,30
+	li	r8,-1
+	addi	r6,r6,10
+	slw	r6,r8,r6	/* convert to mask */
+
+	bl	1f		/* Find our address */
+1:	mflr	r7
+
+	mfspr	r8,SPRN_MAS3
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r23,SPRN_MAS7
+#endif
+	and	r8,r6,r8
+	subfic	r9,r6,-4096
+	and	r9,r9,r7
+
+	or	r25,r8,r9
+	ori	r8,r25,(MAS3_SX|MAS3_SW|MAS3_SR)
+
+	/* Just modify the entry ID and EPN for the temp mapping */
 	lis	r7,0x1000	/* Set MAS0(TLBSEL) = 1 */
 	rlwimi	r7,r5,16,4,15	/* Setup MAS0 = TLBSEL | ESEL(r5) */
 	mtspr	SPRN_MAS0,r7
@@ -177,12 +200,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	ori	r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
 	mtspr	SPRN_MAS1,r6
 	mfspr	r6,SPRN_MAS2
-	lis	r7,PHYSICAL_START@h
+	li	r7,0		/* temp EPN = 0 */
 	rlwimi	r7,r6,0,20,31
 	mtspr	SPRN_MAS2,r7
-	mfspr	r6,SPRN_MAS3
-	rlwimi	r7,r6,0,20,31
-	mtspr	SPRN_MAS3,r7
+	mtspr	SPRN_MAS3,r8
 	tlbwe
 
 	xori	r6,r4,1
@@ -232,8 +253,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	ori	r6,r6,PAGE_OFFSET@l
 	rlwimi	r6,r7,0,20,31
 	mtspr	SPRN_MAS2,r6
-	li	r7,(MAS3_SX|MAS3_SW|MAS3_SR)
-	mtspr	SPRN_MAS3,r7
+	mtspr	SPRN_MAS3,r8
 	tlbwe
 
 /* 7. Jump to KERNELBASE mapping */
@@ -283,7 +303,10 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	SET_IVOR(12, WatchdogTimer);
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
+	SET_IVOR(15, DebugDebug);
+#if defined(CONFIG_E500)
+	SET_IVOR(15, DebugCrit);
+#endif
 	SET_IVOR(32, SPEUnavailable);
 	SET_IVOR(33, SPEFloatingPointData);
 	SET_IVOR(34, SPEFloatingPointRound);
@@ -718,7 +741,10 @@ interrupt_base:
 
 
 	/* Debug Interrupt */
-	DEBUG_EXCEPTION
+	DEBUG_DEBUG_EXCEPTION
+#if defined(CONFIG_E500)
+	DEBUG_CRIT_EXCEPTION
+#endif
 
 /*
  * Local functions
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 2f50bb5d00f9..9971159c8040 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -183,7 +183,7 @@ static int ibmebus_create_devices(const struct of_device_id *matches)
 		ret = ibmebus_create_device(child);
 		if (ret) {
 			printk(KERN_ERR "%s: failed to create device (%i)",
-			       __FUNCTION__, ret);
+			       __func__, ret);
 			of_node_put(child);
 			break;
 		}
@@ -269,7 +269,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus,
 	if (bus_find_device(&ibmebus_bus_type, NULL, path,
 			    ibmebus_match_path)) {
 		printk(KERN_WARNING "%s: %s has already been probed\n",
-		       __FUNCTION__, path);
+		       __func__, path);
 		rc = -EEXIST;
 		goto out;
 	}
@@ -279,7 +279,7 @@ static ssize_t ibmebus_store_probe(struct bus_type *bus,
 		of_node_put(dn);
 	} else {
 		printk(KERN_WARNING "%s: no such device node: %s\n",
-		       __FUNCTION__, path);
+		       __func__, path);
 		rc = -ENODEV;
 	}
 
@@ -308,7 +308,7 @@ static ssize_t ibmebus_store_remove(struct bus_type *bus,
 		return count;
 	} else {
 		printk(KERN_WARNING "%s: %s not on the bus\n",
-		       __FUNCTION__, path);
+		       __func__, path);
 
 		kfree(path);
 		return -ENODEV;
@@ -337,14 +337,14 @@ static int __init ibmebus_bus_init(void)
 	err = of_bus_type_init(&ibmebus_bus_type, "ibmebus");
 	if (err) {
 		printk(KERN_ERR "%s: failed to register IBM eBus.\n",
-		       __FUNCTION__);
+		       __func__);
 		return err;
 	}
 
 	err = device_register(&ibmebus_bus_device);
 	if (err) {
 		printk(KERN_WARNING "%s: device_register returned %i\n",
-		       __FUNCTION__, err);
+		       __func__, err);
 		bus_unregister(&ibmebus_bus_type);
 
 		return err;
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 8f1f4e539c4b..0c663669bc32 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -520,7 +520,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
 	unsigned int order;
 
 	if (!tbl || !tbl->it_map) {
-		printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__,
+		printk(KERN_ERR "%s: expected TCE map for %s\n", __func__,
 				node_name);
 		return;
 	}
@@ -530,7 +530,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
 	for (i = 0; i < (tbl->it_size/64); i++) {
 		if (tbl->it_map[i] != 0) {
 			printk(KERN_WARNING "%s: Unexpected TCEs for %s\n",
-				__FUNCTION__, node_name);
+				__func__, node_name);
 			break;
 		}
 	}
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index b0e5deb4274f..425616f92d18 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -114,7 +114,7 @@ static inline void set_soft_enabled(unsigned long enable)
 	: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
 }
 
-void local_irq_restore(unsigned long en)
+void raw_local_irq_restore(unsigned long en)
 {
 	/*
 	 * get_paca()->soft_enabled = en;
@@ -143,7 +143,6 @@ void local_irq_restore(unsigned long en)
 		 */
 		if (local_paca->lppaca_ptr->int_dword.any_int)
 			iseries_handle_interrupts();
-		return;
 	}
 
 	/*
@@ -175,6 +174,7 @@ void local_irq_restore(unsigned long en)
 
 	__hard_irq_enable();
 }
+EXPORT_SYMBOL(raw_local_irq_restore);
 #endif /* CONFIG_PPC64 */
 
 int show_interrupts(struct seq_file *p, void *v)
@@ -311,8 +311,21 @@ void do_IRQ(struct pt_regs *regs)
 				handler = &__do_IRQ;
 			irqtp->task = curtp->task;
 			irqtp->flags = 0;
+
+			/* Copy the softirq bits in preempt_count so that the
+			 * softirq checks work in the hardirq context.
+			 */
+			irqtp->preempt_count =
+				(irqtp->preempt_count & ~SOFTIRQ_MASK) |
+				(curtp->preempt_count & SOFTIRQ_MASK);
+
 			call_handle_irq(irq, desc, irqtp, handler);
 			irqtp->task = NULL;
+
+
+			/* Set any flag that may have been set on the
+			 * alternate stack
+			 */
 			if (irqtp->flags)
 				set_bits(irqtp->flags, &curtp->flags);
 		} else
@@ -358,7 +371,7 @@ void irq_ctx_init(void)
 		memset((void *)softirq_ctx[i], 0, THREAD_SIZE);
 		tp = softirq_ctx[i];
 		tp->cpu = i;
-		tp->preempt_count = SOFTIRQ_OFFSET;
+		tp->preempt_count = 0;
 
 		memset((void *)hardirq_ctx[i], 0, THREAD_SIZE);
 		tp = hardirq_ctx[i];
diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c
index ee172aa42aa7..289af348978d 100644
--- a/arch/powerpc/kernel/isa-bridge.c
+++ b/arch/powerpc/kernel/isa-bridge.c
@@ -80,13 +80,13 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
 	 *			(size depending on dev->n_addr_cells)
 	 *   cell 5:		the size of the range
 	 */
-	if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO) {
+	if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO) {
 		range++;
 		rlen -= sizeof(struct isa_range);
 		if (rlen < sizeof(struct isa_range))
 			goto inval_range;
 	}
-	if ((range->isa_addr.a_hi && ISA_SPACE_MASK) != ISA_SPACE_IO)
+	if ((range->isa_addr.a_hi & ISA_SPACE_MASK) != ISA_SPACE_IO)
 		goto inval_range;
 
 	isa_addr = range->isa_addr.a_lo;
@@ -99,7 +99,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node,
 	 */
 	if ((pci_addr != 0) || (isa_addr != 0)) {
 		printk(KERN_ERR "unexpected isa to pci mapping: %s\n",
-		       __FUNCTION__);
+		       __func__);
 		return;
 	}
 
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index dcb89a88df46..1ffacc698ffb 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -226,7 +226,7 @@ static void parse_system_parameter_string(struct seq_file *m)
 	unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 	if (!local_buffer) {
 		printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
-		       __FILE__, __FUNCTION__, __LINE__);
+		       __FILE__, __func__, __LINE__);
 		return;
 	}
 
@@ -243,14 +243,14 @@ static void parse_system_parameter_string(struct seq_file *m)
 	if (call_status != 0) {
 		printk(KERN_INFO
 		       "%s %s Error calling get-system-parameter (0x%x)\n",
-		       __FILE__, __FUNCTION__, call_status);
+		       __FILE__, __func__, call_status);
 	} else {
 		int splpar_strlen;
 		int idx, w_idx;
 		char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL);
 		if (!workbuffer) {
 			printk(KERN_ERR "%s %s kmalloc failure at line %d \n",
-			       __FILE__, __FUNCTION__, __LINE__);
+			       __FILE__, __func__, __LINE__);
 			kfree(local_buffer);
 			return;
 		}
@@ -484,10 +484,10 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 	current_weight = (resource >> 5 * 8) & 0xFF;
 
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __FUNCTION__, current_entitled, current_weight);
+		 __func__, current_entitled, current_weight);
 
 	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __FUNCTION__, *new_entitled_ptr, *new_weight_ptr);
+		 __func__, *new_entitled_ptr, *new_weight_ptr);
 
 	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
 				    *new_weight_ptr);
@@ -502,7 +502,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EINVAL;
 	} else {
 		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __FUNCTION__, retval);
+		       __func__, retval);
 		retval = -EIO;
 	}
 
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index c0c8e8c3ced9..2d202f274e73 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -12,8 +12,9 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
+#include <linux/lmb.h>
 #include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 5c2e253ddfb1..9d2c56621f1e 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -785,6 +785,21 @@ _GLOBAL(__lshrdi3)
 	or	r4,r4,r7	# LSW |= t2
 	blr
 
+/*
+ * 64-bit comparison: __ucmpdi2(u64 a, u64 b)
+ * Returns 0 if a < b, 1 if a == b, 2 if a > b.
+ */
+_GLOBAL(__ucmpdi2)
+	cmplw	r3,r5
+	li	r3,1
+	bne	1f
+	cmplw	r4,r6
+	beqlr
+1:	li	r3,0
+	bltlr
+	li	r3,2
+	blr
+
 _GLOBAL(abs)
 	srawi	r4,r3,31
 	xor	r3,r3,r4
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 55f1a25085cd..ac163bd46cfd 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -15,7 +15,6 @@
 #include <asm/ptrace.h>
 #include <asm/page.h>
 #include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
 #include <asm/paca.h>
 #include <asm/mmu.h>
 
@@ -25,13 +24,13 @@
 extern unsigned long __toc_start;
 
 /*
- * iSeries structure which the hypervisor knows about - this structure
+ * The structure which the hypervisor knows about - this structure
  * should not cross a page boundary.  The vpa_init/register_vpa call
  * is now known to fail if the lppaca structure crosses a page
- * boundary.  The lppaca is also used on POWER5 pSeries boxes.  The
- * lppaca is 640 bytes long, and cannot readily change since the
- * hypervisor knows its layout, so a 1kB alignment will suffice to
- * ensure that it doesn't cross a page boundary.
+ * boundary.  The lppaca is also used on legacy iSeries and POWER5
+ * pSeries boxes.  The lppaca is 640 bytes long, and cannot readily
+ * change since the hypervisor knows its layout, so a 1kB alignment
+ * will suffice to ensure that it doesn't cross a page boundary.
  */
 struct lppaca lppaca[] = {
 	[0 ... (NR_CPUS-1)] = {
@@ -66,32 +65,17 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = {
  * processors.  The processor VPD array needs one entry per physical
  * processor (not thread).
  */
-#define PACA_INIT_COMMON(number)					    \
+#define PACA_INIT(number)						    \
+{									    \
 	.lppaca_ptr = &lppaca[number],					    \
 	.lock_token = 0x8000,						    \
 	.paca_index = (number),		/* Paca Index */		    \
 	.kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL,		    \
 	.hw_cpu_id = 0xffff,						    \
-	.slb_shadow_ptr = &slb_shadow[number],
-
-#ifdef CONFIG_PPC_ISERIES
-#define PACA_INIT_ISERIES(number)					    \
-	.reg_save_ptr = &iseries_reg_save[number],
-
-#define PACA_INIT(number)						    \
-{									    \
-	PACA_INIT_COMMON(number)					    \
-	PACA_INIT_ISERIES(number)					    \
+	.slb_shadow_ptr = &slb_shadow[number],				    \
+	.__current = &init_task,					    \
 }
 
-#else
-#define PACA_INIT(number)						    \
-{									    \
-	PACA_INIT_COMMON(number)					    \
-}
-
-#endif
-
 struct paca_struct paca[] = {
 	PACA_INIT(0),
 #if NR_CPUS > 1
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 980fe32895c0..063cdd413049 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -748,7 +748,13 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev)
 		struct resource *res = dev->resource + i;
 		if (!res->flags)
 			continue;
-		if (res->end == 0xffffffff) {
+		/* On platforms that have PPC_PCI_PROBE_ONLY set, we don't
+		 * consider 0 as an unassigned BAR value. It's technically
+		 * a valid value, but linux doesn't like it... so when we can
+		 * re-assign things, we do so, but if we can't, we keep it
+		 * around and hope for the best...
+		 */
+		if (res->start == 0 && !(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
 			pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] is unassigned\n",
 				 pci_name(dev), i,
 				 (unsigned long long)res->start,
@@ -1155,41 +1161,9 @@ EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
 	if (ppc_md.pcibios_enable_device_hook)
 		if (ppc_md.pcibios_enable_device_hook(dev))
 			return -EINVAL;
 
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (r->parent == NULL) {
-			printk(KERN_ERR "PCI: Device %s not available because"
-			       " of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
-
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
index 90e562771791..fda05e2211d6 100644
--- a/arch/powerpc/kernel/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -135,4 +135,6 @@ struct ucontext32 {
 	struct mcontext32	uc_mcontext;
 };
 
+extern int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s);
+
 #endif  /* _PPC64_PPC32_H */
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index aa9ff35b0e63..09fcb50c45ae 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -15,7 +15,6 @@
 #include <linux/bitops.h>
 
 #include <asm/page.h>
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/cacheflush.h>
 #include <asm/uaccess.h>
@@ -45,10 +44,6 @@
 #include <asm/signal.h>
 #include <asm/dcr.h>
 
-#ifdef CONFIG_PPC64
-EXPORT_SYMBOL(local_irq_restore);
-#endif
-
 #ifdef CONFIG_PPC32
 extern void transfer_to_handler(void);
 extern void do_IRQ(struct pt_regs *regs);
@@ -78,6 +73,7 @@ EXPORT_SYMBOL(strncpy);
 EXPORT_SYMBOL(strcat);
 EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(strcmp);
+EXPORT_SYMBOL(strncmp);
 
 EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_generic);
@@ -149,6 +145,8 @@ long long __lshrdi3(long long, int);
 EXPORT_SYMBOL(__ashrdi3);
 EXPORT_SYMBOL(__ashldi3);
 EXPORT_SYMBOL(__lshrdi3);
+int __ucmpdi2(unsigned long long, unsigned long long);
+EXPORT_SYMBOL(__ucmpdi2);
 #endif
 
 EXPORT_SYMBOL(memcpy);
@@ -189,3 +187,4 @@ EXPORT_SYMBOL(intercept_table);
 EXPORT_SYMBOL(__mtdcr);
 EXPORT_SYMBOL(__mfdcr);
 #endif
+EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 4846bf543a8c..703100d5e458 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -241,8 +241,12 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+static DEFINE_PER_CPU(unsigned long, current_dabr);
+
 int set_dabr(unsigned long dabr)
 {
+	__get_cpu_var(current_dabr) = dabr;
+
 #ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
@@ -259,8 +263,6 @@ int set_dabr(unsigned long dabr)
 DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array);
 #endif
 
-static DEFINE_PER_CPU(unsigned long, current_dabr);
-
 struct task_struct *__switch_to(struct task_struct *prev,
 	struct task_struct *new)
 {
@@ -325,10 +327,8 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 #endif /* CONFIG_SMP */
 
-	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) {
+	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
-		__get_cpu_var(current_dabr) = new->thread.dabr;
-	}
 
 	new_thread = &new->thread;
 	old_thread = &current->thread;
@@ -353,6 +353,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	account_process_vtime(current);
 	calculate_steal_time();
 
+	/*
+	 * We can't take a PMU exception inside _switch() since there is a
+	 * window where the kernel stack SLB and the kernel stack are out
+	 * of sync. Hard disable here.
+	 */
+	hard_irq_disable();
 	last = _switch(old_thread, new_thread);
 
 	local_irq_restore(flags);
@@ -862,11 +868,6 @@ int sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
 	flush_spe_to_thread(current);
 	error = do_execve(filename, (char __user * __user *) a1,
 			  (char __user * __user *) a2, regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 out:
 	return error;
@@ -913,20 +914,6 @@ int validate_sp(unsigned long sp, struct task_struct *p,
 	return valid_irq_stack(sp, p, nbytes);
 }
 
-#ifdef CONFIG_PPC64
-#define MIN_STACK_FRAME	112	/* same as STACK_FRAME_OVERHEAD, in fact */
-#define FRAME_LR_SAVE	2
-#define INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD + 288)
-#define REGS_MARKER	0x7265677368657265ul
-#define FRAME_MARKER	12
-#else
-#define MIN_STACK_FRAME	16
-#define FRAME_LR_SAVE	1
-#define INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
-#define REGS_MARKER	0x72656773ul
-#define FRAME_MARKER	2
-#endif
-
 EXPORT_SYMBOL(validate_sp);
 
 unsigned long get_wchan(struct task_struct *p)
@@ -938,15 +925,15 @@ unsigned long get_wchan(struct task_struct *p)
 		return 0;
 
 	sp = p->thread.ksp;
-	if (!validate_sp(sp, p, MIN_STACK_FRAME))
+	if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD))
 		return 0;
 
 	do {
 		sp = *(unsigned long *)sp;
-		if (!validate_sp(sp, p, MIN_STACK_FRAME))
+		if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD))
 			return 0;
 		if (count > 0) {
-			ip = ((unsigned long *)sp)[FRAME_LR_SAVE];
+			ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE];
 			if (!in_sched_functions(ip))
 				return ip;
 		}
@@ -975,12 +962,12 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 	lr = 0;
 	printk("Call Trace:\n");
 	do {
-		if (!validate_sp(sp, tsk, MIN_STACK_FRAME))
+		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
 			return;
 
 		stack = (unsigned long *) sp;
 		newsp = stack[0];
-		ip = stack[FRAME_LR_SAVE];
+		ip = stack[STACK_FRAME_LR_SAVE];
 		if (!firstframe || ip != lr) {
 			printk("["REG"] ["REG"] ", sp, ip);
 			print_symbol("%s", ip);
@@ -994,8 +981,8 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		 * See if this is an exception frame.
 		 * We look for the "regshere" marker in the current frame.
 		 */
-		if (validate_sp(sp, tsk, INT_FRAME_SIZE)
-		    && stack[FRAME_MARKER] == REGS_MARKER) {
+		if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE)
+		    && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
 			struct pt_regs *regs = (struct pt_regs *)
 				(sp + STACK_FRAME_OVERHEAD);
 			printk("--- Exception: %lx", regs->trap);
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index eac97f48b9b8..3bfe7837e820 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -31,10 +31,10 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
-#include <asm/lmb.h>
 #include <asm/page.h>
 #include <asm/processor.h>
 #include <asm/irq.h>
@@ -51,6 +51,7 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 #include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
 #include <asm/kexec.h>
 
 #ifdef DEBUG
@@ -436,7 +437,7 @@ early_param("mem", early_parse_mem);
  * The device tree may be allocated beyond our memory limit, or inside the
  * crash kernel region for kdump. If so, move it out of the way.
  */
-static void move_device_tree(void)
+static void __init move_device_tree(void)
 {
 	unsigned long start, size;
 	void *p;
@@ -1040,6 +1041,87 @@ static void __init early_reserve_mem(void)
 #endif
 }
 
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+	unsigned long tmp;
+
+	if (phyp_dump_info->reserve_bootvar)
+		return phyp_dump_info->reserve_bootvar;
+
+	/* divide by 20 to get 5% of value */
+	tmp = lmb_end_of_DRAM();
+	do_div(tmp, 20);
+
+	/* round it down in multiples of 256 */
+	tmp = tmp & ~0x0FFFFFFFUL;
+
+	return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+	unsigned long base, size;
+	unsigned long variable_reserve_size;
+
+	if (!phyp_dump_info->phyp_dump_configured) {
+		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+		return;
+	}
+
+	if (!phyp_dump_info->phyp_dump_at_boot) {
+		printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+		return;
+	}
+
+	variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+	if (phyp_dump_info->phyp_dump_is_active) {
+		/* Reserve *everything* above RMR.Area freed by userland tools*/
+		base = variable_reserve_size;
+		size = lmb_end_of_DRAM() - base;
+
+		/* XXX crashed_ram_end is wrong, since it may be beyond
+		 * the memory_limit, it will need to be adjusted. */
+		lmb_reserve(base, size);
+
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	} else {
+		size = phyp_dump_info->cpu_state_size +
+			phyp_dump_info->hpte_region_size +
+			variable_reserve_size;
+		base = lmb_end_of_DRAM() - size;
+		lmb_reserve(base, size);
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	}
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
+
+
 void __init early_init_devtree(void *params)
 {
 	DBG(" -> early_init_devtree(%p)\n", params);
@@ -1052,6 +1134,11 @@ void __init early_init_devtree(void *params)
 	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
 #endif
 
+#ifdef CONFIG_PHYP_DUMP
+	/* scan tree to see if dump occured during last boot */
+	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
 	/* Retrieve various informations from the /chosen node of the
 	 * device-tree, including the platform type, initrd location and
 	 * size, TCE reserve, and more ...
@@ -1072,6 +1159,7 @@ void __init early_init_devtree(void *params)
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
+	phyp_dump_reserve_mem();
 
 	lmb_enforce_memory_limit(memory_limit);
 	lmb_analyze();
@@ -1244,12 +1332,14 @@ EXPORT_SYMBOL(of_node_put);
  */
 void of_attach_node(struct device_node *np)
 {
-	write_lock(&devtree_lock);
+	unsigned long flags;
+
+	write_lock_irqsave(&devtree_lock, flags);
 	np->sibling = np->parent->child;
 	np->allnext = allnodes;
 	np->parent->child = np;
 	allnodes = np;
-	write_unlock(&devtree_lock);
+	write_unlock_irqrestore(&devtree_lock, flags);
 }
 
 /*
@@ -1260,8 +1350,9 @@ void of_attach_node(struct device_node *np)
 void of_detach_node(struct device_node *np)
 {
 	struct device_node *parent;
+	unsigned long flags;
 
-	write_lock(&devtree_lock);
+	write_lock_irqsave(&devtree_lock, flags);
 
 	parent = np->parent;
 	if (!parent)
@@ -1292,7 +1383,7 @@ void of_detach_node(struct device_node *np)
 	of_node_set_flag(np, OF_DETACHED);
 
 out_unlock:
-	write_unlock(&devtree_lock);
+	write_unlock_irqrestore(&devtree_lock, flags);
 }
 
 #ifdef CONFIG_PPC_PSERIES
@@ -1373,20 +1464,21 @@ __initcall(prom_reconfig_setup);
 int prom_add_property(struct device_node* np, struct property* prop)
 {
 	struct property **next;
+	unsigned long flags;
 
 	prop->next = NULL;	
-	write_lock(&devtree_lock);
+	write_lock_irqsave(&devtree_lock, flags);
 	next = &np->properties;
 	while (*next) {
 		if (strcmp(prop->name, (*next)->name) == 0) {
 			/* duplicate ! don't insert it */
-			write_unlock(&devtree_lock);
+			write_unlock_irqrestore(&devtree_lock, flags);
 			return -1;
 		}
 		next = &(*next)->next;
 	}
 	*next = prop;
-	write_unlock(&devtree_lock);
+	write_unlock_irqrestore(&devtree_lock, flags);
 
 #ifdef CONFIG_PROC_DEVICETREE
 	/* try to add to proc as well if it was initialized */
@@ -1406,9 +1498,10 @@ int prom_add_property(struct device_node* np, struct property* prop)
 int prom_remove_property(struct device_node *np, struct property *prop)
 {
 	struct property **next;
+	unsigned long flags;
 	int found = 0;
 
-	write_lock(&devtree_lock);
+	write_lock_irqsave(&devtree_lock, flags);
 	next = &np->properties;
 	while (*next) {
 		if (*next == prop) {
@@ -1421,7 +1514,7 @@ int prom_remove_property(struct device_node *np, struct property *prop)
 		}
 		next = &(*next)->next;
 	}
-	write_unlock(&devtree_lock);
+	write_unlock_irqrestore(&devtree_lock, flags);
 
 	if (!found)
 		return -ENODEV;
@@ -1447,9 +1540,10 @@ int prom_update_property(struct device_node *np,
 			 struct property *oldprop)
 {
 	struct property **next;
+	unsigned long flags;
 	int found = 0;
 
-	write_lock(&devtree_lock);
+	write_lock_irqsave(&devtree_lock, flags);
 	next = &np->properties;
 	while (*next) {
 		if (*next == oldprop) {
@@ -1463,7 +1557,7 @@ int prom_update_property(struct device_node *np,
 		}
 		next = &(*next)->next;
 	}
-	write_unlock(&devtree_lock);
+	write_unlock_irqrestore(&devtree_lock, flags);
 
 	if (!found)
 		return -ENODEV;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 5ab4c8466cc9..6d6df1e60325 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2240,6 +2240,14 @@ static void __init fixup_device_tree_efika(void)
 	if (rv != PROM_ERROR && (strcmp(prop, "chrp") == 0))
 		prom_setprop(node, "/", "device_type", "efika", sizeof("efika"));
 
+	/* CODEGEN,description is exposed in /proc/cpuinfo so
+	   fix that too */
+	rv = prom_getprop(node, "CODEGEN,description", prop, sizeof(prop));
+	if (rv != PROM_ERROR && (strstr(prop, "CHRP")))
+		prom_setprop(node, "/", "CODEGEN,description",
+			     "Efika 5200B PowerPC System",
+			     sizeof("Efika 5200B PowerPC System"));
+
 	/* Fixup bestcomm interrupts property */
 	node = call_prom("finddevice", 1, 1, ADDR("/builtin/bestcomm"));
 	if (PHANDLE_VALID(node)) {
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 7673e9865733..2a9fe97e4521 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -530,15 +530,21 @@ static int gpr32_set(struct task_struct *target,
 		--count;
 	}
 
-	if (kbuf)
+	if (kbuf) {
 		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count)
 			regs[pos++] = *k++;
-	else
+		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+			++k;
+	} else {
 		for (; count > 0 && pos <= PT_MAX_PUT_REG; --count) {
 			if (__get_user(reg, u++))
 				return -EFAULT;
 			regs[pos++] = reg;
 		}
+		for (; count > 0 && pos < PT_TRAP; --count, ++pos)
+			if (__get_user(reg, u++))
+				return -EFAULT;
+	}
 
 	if (count > 0 && pos == PT_TRAP) {
 		if (kbuf)
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 4c1de6af4c09..9d30e10970ac 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -29,12 +29,15 @@
 #include <linux/security.h>
 #include <linux/signal.h>
 #include <linux/compat.h>
+#include <linux/elf.h>
 
 #include <asm/uaccess.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 
+#include "ppc32.h"
+
 /*
  * does not yet catch signals sent when the child dies.
  * in exit.c or in signal.c.
@@ -64,6 +67,27 @@ static long compat_ptrace_old(struct task_struct *child, long request,
 	return -EPERM;
 }
 
+static int compat_ptrace_getsiginfo(struct task_struct *child, compat_siginfo_t __user *data)
+{
+	siginfo_t lastinfo;
+	int error = -ESRCH;
+
+	read_lock(&tasklist_lock);
+	if (likely(child->sighand != NULL)) {
+		error = -EINVAL;
+		spin_lock_irq(&child->sighand->siglock);
+		if (likely(child->last_siginfo != NULL)) {
+			lastinfo = *child->last_siginfo;
+			error = 0;
+		}
+		spin_unlock_irq(&child->sighand->siglock);
+	}
+	read_unlock(&tasklist_lock);
+	if (!error)
+		return copy_siginfo_to_user32(data, &lastinfo);
+	return error;
+}
+
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
@@ -282,6 +306,9 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			0, PT_REGS_COUNT * sizeof(compat_long_t),
 			compat_ptr(data));
 
+	case PTRACE_GETSIGINFO:
+		return compat_ptrace_getsiginfo(child, compat_ptr(data));
+
 	case PTRACE_GETFPREGS:
 	case PTRACE_SETFPREGS:
 	case PTRACE_GETVRREGS:
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 52e95c2158c0..34843c318419 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -22,11 +22,11 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
 #include <asm/hvcall.h>
-#include <asm/semaphore.h>
 #include <asm/machdep.h>
 #include <asm/firmware.h>
 #include <asm/page.h>
@@ -34,7 +34,6 @@
 #include <asm/system.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
-#include <asm/lmb.h>
 #include <asm/udbg.h>
 #include <asm/syscalls.h>
 #include <asm/smp.h>
@@ -507,7 +506,7 @@ int rtas_error_rc(int rtas_rc)
 			break;
 		default:
 			printk(KERN_ERR "%s: unexpected RTAS error %d\n",
-					__FUNCTION__, rtas_rc);
+					__func__, rtas_rc);
 			rc = -ERANGE;
 			break;
 	}
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index f2276593f416..627f126d1848 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -356,7 +356,7 @@ static int rtas_excl_open(struct inode *inode, struct file *file)
 
 	/* Enforce exclusive open with use count of PDE */
 	spin_lock(&flash_file_open_lock);
-	if (atomic_read(&dp->count) > 1) {
+	if (atomic_read(&dp->count) > 2) {
 		spin_unlock(&flash_file_open_lock);
 		return -EBUSY;
 	}
@@ -807,7 +807,7 @@ int __init rtas_flash_init(void)
 				rtas_block_ctor);
 	if (!flash_block_cache) {
 		printk(KERN_ERR "%s: failed to create block cache\n",
-				__FUNCTION__);
+				__func__);
 		rc = -ENOMEM;
 		goto cleanup;
 	}
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 433a0a0949fb..3ab88a9dc70d 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -56,21 +56,6 @@ static inline int config_access_valid(struct pci_dn *dn, int where)
 	return 0;
 }
 
-static int of_device_available(struct device_node * dn)
-{
-        const char *status;
-
-        status = of_get_property(dn, "status", NULL);
-
-        if (!status)
-                return 1;
-
-        if (!strcmp(status, "okay"))
-                return 1;
-
-        return 0;
-}
-
 int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val)
 {
 	int returnval = -1;
@@ -117,7 +102,7 @@ static int rtas_pci_read_config(struct pci_bus *bus,
 	for (dn = busdn->child; dn; dn = dn->sibling) {
 		struct pci_dn *pdn = PCI_DN(dn);
 		if (pdn && pdn->devfn == devfn
-		    && of_device_available(dn))
+		    && of_device_is_available(dn))
 			return rtas_read_config(pdn, where, size, val);
 	}
 
@@ -164,7 +149,7 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 	for (dn = busdn->child; dn; dn = dn->sibling) {
 		struct pci_dn *pdn = PCI_DN(dn);
 		if (pdn && pdn->devfn == devfn
-		    && of_device_available(dn))
+		    && of_device_is_available(dn))
 			return rtas_write_config(pdn, where, size, val);
 	}
 	return PCIBIOS_DEVICE_NOT_FOUND;
@@ -326,7 +311,7 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
 
 	res = b->resource[0];
 	if (!res->flags) {
-		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__,
+		printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
 				b->name);
 		return 1;
 	}
@@ -334,13 +319,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
 	rc = pcibios_unmap_io_space(b);
 	if (rc) {
 		printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
-			__FUNCTION__, b->name);
+			__func__, b->name);
 		return 1;
 	}
 
 	if (release_resource(res)) {
 		printk(KERN_ERR "%s: failed to release IO on bus %s\n",
-				__FUNCTION__, b->name);
+				__func__, b->name);
 		return 1;
 	}
 
@@ -348,13 +333,13 @@ int pcibios_remove_root_bus(struct pci_controller *phb)
 		res = b->resource[i];
 		if (!res->flags && i == 0) {
 			printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
-				__FUNCTION__, b->name);
+				__func__, b->name);
 			return 1;
 		}
 		if (res->flags && release_resource(res)) {
 			printk(KERN_ERR
 			       "%s: failed to release IO %d on bus %s\n",
-				__FUNCTION__, i, b->name);
+				__func__, i, b->name);
 			return 1;
 		}
 	}
diff --git a/arch/powerpc/kernel/semaphore.c b/arch/powerpc/kernel/semaphore.c
deleted file mode 100644
index 2f8c3c951394..000000000000
--- a/arch/powerpc/kernel/semaphore.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * PowerPC-specific semaphore code.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
- * to eliminate the SMP races in the old version between the updates
- * of `count' and `waking'.  Now we use negative `count' values to
- * indicate that some process(es) are waiting for the semaphore.
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/atomic.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- *	old_count = sem->count;
- *	tmp = MAX(old_count, 0) + incr;
- *	sem->count = tmp;
- *	return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
-	int old_count, tmp;
-
-	__asm__ __volatile__("\n"
-"1:	lwarx	%0,0,%3\n"
-"	srawi	%1,%0,31\n"
-"	andc	%1,%0,%1\n"
-"	add	%1,%1,%4\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%1,0,%3\n"
-"	bne	1b"
-	: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
-	: "r" (&sem->count), "r" (incr), "m" (sem->count)
-	: "cc");
-
-	return old_count;
-}
-
-void __up(struct semaphore *sem)
-{
-	/*
-	 * Note that we incremented count in up() before we came here,
-	 * but that was ineffective since the result was <= 0, and
-	 * any negative value of count is equivalent to 0.
-	 * This ends up setting count to 1, unless count is now > 0
-	 * (i.e. because some other cpu has called up() in the meantime),
-	 * in which case we just increment count.
-	 */
-	__sem_update_count(sem, 1);
-	wake_up(&sem->wait);
-}
-EXPORT_SYMBOL(__up);
-
-/*
- * Note that when we come in to __down or __down_interruptible,
- * we have already decremented count, but that decrement was
- * ineffective since the result was < 0, and any negative value
- * of count is equivalent to 0.
- * Thus it is only when we decrement count from some value > 0
- * that we have actually got the semaphore.
- */
-void __sched __down(struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	__set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	/*
-	 * Try to get the semaphore.  If the count is > 0, then we've
-	 * got the semaphore; we decrement count and exit the loop.
-	 * If the count is 0 or negative, we set it to -1, indicating
-	 * that we are asleep, and then sleep.
-	 */
-	while (__sem_update_count(sem, -1) <= 0) {
-		schedule();
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	__set_task_state(tsk, TASK_RUNNING);
-
-	/*
-	 * If there are any more sleepers, wake one of them up so
-	 * that it can either get the semaphore, or set count to -1
-	 * indicating that there are still processes sleeping.
-	 */
-	wake_up(&sem->wait);
-}
-EXPORT_SYMBOL(__down);
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	__set_task_state(tsk, TASK_INTERRUPTIBLE);
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	while (__sem_update_count(sem, -1) <= 0) {
-		if (signal_pending(current)) {
-			/*
-			 * A signal is pending - give up trying.
-			 * Set sem->count to 0 if it is negative,
-			 * since we are no longer sleeping.
-			 */
-			__sem_update_count(sem, 0);
-			retval = -EINTR;
-			break;
-		}
-		schedule();
-		set_task_state(tsk, TASK_INTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	__set_task_state(tsk, TASK_RUNNING);
-
-	wake_up(&sem->wait);
-	return retval;
-}
-EXPORT_SYMBOL(__down_interruptible);
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 6adb5a1e98bb..db540eab09f4 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -34,6 +34,7 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
+#include <linux/lmb.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/processor.h>
@@ -56,7 +57,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/lmb.h>
 #include <asm/xmon.h>
 #include <asm/cputhreads.h>
 
@@ -167,6 +167,8 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	unsigned short min;
 
 	if (cpu_id == NR_CPUS) {
+		struct device_node *root;
+		const char *model = NULL;
 #if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
 		unsigned long bogosum = 0;
 		int i;
@@ -178,6 +180,13 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 		seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
 		if (ppc_md.name)
 			seq_printf(m, "platform\t: %s\n", ppc_md.name);
+		root = of_find_node_by_path("/");
+		if (root)
+			model = of_get_property(root, "model", NULL);
+		if (model)
+			seq_printf(m, "model\t\t: %s\n", model);
+		of_node_put(root);
+
 		if (ppc_md.show_cpuinfo != NULL)
 			ppc_md.show_cpuinfo(m);
 
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index cd870a823d18..36f6779c88d4 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -10,9 +10,6 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/initrd.h>
-#if defined(CONFIG_IDE) || defined(CONFIG_IDE_MODULE)
-#include <linux/ide.h>
-#endif
 #include <linux/tty.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
@@ -51,11 +48,6 @@
 
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-struct ide_machdep_calls ppc_ide_md;
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
 int boot_cpuid;
 EXPORT_SYMBOL_GPL(boot_cpuid);
 int boot_cpuid_phys;
@@ -172,6 +164,18 @@ int __init ppc_setup_l2cr(char *str)
 }
 __setup("l2cr=", ppc_setup_l2cr);
 
+/* Checks "l3cr=xxxx" command-line option */
+int __init ppc_setup_l3cr(char *str)
+{
+	if (cpu_has_feature(CPU_FTR_L3CR)) {
+		unsigned long val = simple_strtoul(str, NULL, 0);
+		printk(KERN_INFO "l3cr set to %lx\n", val);
+		_set_L3CR(val);		/* and enable it */
+	}
+	return 1;
+}
+__setup("l3cr=", ppc_setup_l3cr);
+
 #ifdef CONFIG_GENERIC_NVRAM
 
 /* Generic nvram hooks used by drivers/char/gen_nvram.c */
@@ -277,7 +281,7 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.panic)
 		setup_panic();
 
-	init_mm.start_code = PAGE_OFFSET;
+	init_mm.start_code = (unsigned long)_stext;
 	init_mm.end_code = (unsigned long) _etext;
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 3b1529c103ef..31ada9fdfc5c 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -33,6 +33,8 @@
 #include <linux/serial_8250.h>
 #include <linux/bootmem.h>
 #include <linux/pci.h>
+#include <linux/lockdep.h>
+#include <linux/lmb.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -55,7 +57,6 @@
 #include <asm/cache.h>
 #include <asm/page.h>
 #include <asm/mmu.h>
-#include <asm/lmb.h>
 #include <asm/firmware.h>
 #include <asm/xmon.h>
 #include <asm/udbg.h>
@@ -178,6 +179,9 @@ void __init early_setup(unsigned long dt_ptr)
 	/* Enable early debugging if any specified (see udbg.h) */
 	udbg_early_init();
 
+	/* Initialize lockdep early or else spinlocks will blow */
+	lockdep_init();
+
  	DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
 
 	/*
@@ -510,7 +514,7 @@ void __init setup_arch(char **cmdline_p)
 	if (ppc_md.panic)
 		setup_panic();
 
-	init_mm.start_code = PAGE_OFFSET;
+	init_mm.start_code = (unsigned long)_stext;
 	init_mm.end_code = (unsigned long) _etext;
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index d840bc772fd3..ad6943468ee9 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -621,6 +621,18 @@ int copy_siginfo_to_user32(struct compat_siginfo __user *d, siginfo_t *s)
 
 #define copy_siginfo_to_user	copy_siginfo_to_user32
 
+int copy_siginfo_from_user32(siginfo_t *to, struct compat_siginfo __user *from)
+{
+	memset(to, 0, sizeof *to);
+
+	if (copy_from_user(to, from, 3*sizeof(int)) ||
+	    copy_from_user(to->_sifields._pad,
+			   from->_sifields._pad, SI_PAD_SIZE32))
+		return -EFAULT;
+
+	return 0;
+}
+
 /*
  * Note: it is necessary to treat pid and sig as unsigned ints, with the
  * corresponding cast to a signed int to insure that the proper conversion
@@ -634,9 +646,10 @@ long compat_sys_rt_sigqueueinfo(u32 pid, u32 sig, compat_siginfo_t __user *uinfo
 	int ret;
 	mm_segment_t old_fs = get_fs();
 
-	if (copy_from_user (&info, uinfo, 3*sizeof(int)) ||
-	    copy_from_user (info._sifields._pad, uinfo->_sifields._pad, SI_PAD_SIZE32))
-		return -EFAULT;
+	ret = copy_siginfo_from_user32(&info, uinfo);
+	if (unlikely(ret))
+		return ret;
+
 	set_fs (KERNEL_DS);
 	/* The __user pointer cast is valid becasuse of the set_fs() */
 	ret = sys_rt_sigqueueinfo((int)pid, (int)sig, (siginfo_t __user *) &info);
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
new file mode 100644
index 000000000000..e3638eeaaae7
--- /dev/null
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -0,0 +1,47 @@
+/*
+ * Stack trace utility
+ *
+ * Copyright 2008 Christoph Hellwig, IBM Corp.
+ *
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/stacktrace.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Save stack-backtrace addresses into a stack_trace buffer.
+ */
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long sp;
+
+	asm("mr %0,1" : "=r" (sp));
+
+	for (;;) {
+		unsigned long *stack = (unsigned long *) sp;
+		unsigned long newsp, ip;
+
+		if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+			return;
+
+		newsp = stack[0];
+		ip = stack[STACK_FRAME_LR_SAVE];
+
+		if (!trace->skip)
+			trace->entries[trace->nr_entries++] = ip;
+		else
+			trace->skip--;
+
+		if (trace->nr_entries >= trace->max_entries)
+			return;
+
+		sp = newsp;
+	}
+}
diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c
index 4a4f5c6b560b..709f8cb8bfca 100644
--- a/arch/powerpc/kernel/sys_ppc32.c
+++ b/arch/powerpc/kernel/sys_ppc32.c
@@ -47,7 +47,6 @@
 #include <asm/types.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
-#include <asm/semaphore.h>
 #include <asm/time.h>
 #include <asm/mmu_context.h>
 #include <asm/ppc-pci.h>
@@ -368,11 +367,6 @@ long compat_sys_execve(unsigned long a0, unsigned long a1, unsigned long a2,
 
 	error = compat_do_execve(filename, compat_ptr(a1), compat_ptr(a2), regs);
 
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 
 out:
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 3b1d5dd65643..e722a4eeb5d0 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -38,7 +38,6 @@
 #include <linux/personality.h>
 
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <asm/syscalls.h>
 #include <asm/time.h>
 #include <asm/unistd.h>
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index d3437c4c4a6f..c21a626af676 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -21,13 +21,14 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
+#include <linux/lmb.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/machdep.h>
 #include <asm/cputable.h>
 #include <asm/sections.h>
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index f98867252ee2..b77f8af7ddde 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -139,7 +139,7 @@ static int vio_bus_remove(struct device *dev)
  */
 int vio_register_driver(struct vio_driver *viodrv)
 {
-	printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__,
+	printk(KERN_DEBUG "%s: driver %s registering\n", __func__,
 		viodrv->driver.name);
 
 	/* fill in 'struct driver' fields */
@@ -184,7 +184,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 	/* we need the 'device_type' property, in order to match with drivers */
 	if (of_node->type == NULL) {
 		printk(KERN_WARNING "%s: node %s missing 'device_type'\n",
-				__FUNCTION__,
+				__func__,
 				of_node->name ? of_node->name : "<unknown>");
 		return NULL;
 	}
@@ -192,7 +192,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 	unit_address = of_get_property(of_node, "reg", NULL);
 	if (unit_address == NULL) {
 		printk(KERN_WARNING "%s: node %s missing 'reg'\n",
-				__FUNCTION__,
+				__func__,
 				of_node->name ? of_node->name : "<unknown>");
 		return NULL;
 	}
@@ -227,7 +227,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 	/* register with generic device framework */
 	if (device_register(&viodev->dev)) {
 		printk(KERN_ERR "%s: failed to register device %s\n",
-				__FUNCTION__, viodev->dev.bus_id);
+				__func__, viodev->dev.bus_id);
 		/* XXX free TCE table */
 		kfree(viodev);
 		return NULL;
@@ -258,7 +258,7 @@ static int __init vio_bus_init(void)
 	err = device_register(&vio_bus_device.dev);
 	if (err) {
 		printk(KERN_WARNING "%s: device_register returned %i\n",
-				__FUNCTION__, err);
+				__func__, err);
 		return err;
 	}
 
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 0afb9e31d2a0..0c3000bf8d75 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -1,11 +1,9 @@
 #ifdef CONFIG_PPC64
-#include <asm/page.h>
 #define PROVIDE32(x)	PROVIDE(__unused__##x)
 #else
-#define PAGE_SIZE	4096
-#define KERNELBASE	CONFIG_KERNEL_START
 #define PROVIDE32(x)	PROVIDE(x)
 #endif
+#include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 
@@ -33,7 +31,7 @@ SECTIONS
  */
 
 	/* Text and gots */
-	.text : {
+	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		ALIGN_FUNCTION();
 		*(.text.head)
 		_text = .;
@@ -58,7 +56,7 @@ SECTIONS
 	RODATA
 
 	/* Exception & bug tables */
-	__ex_table : {
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
 		__start___ex_table = .;
 		*(__ex_table)
 		__stop___ex_table = .;
@@ -74,7 +72,7 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
 
-	.init.text : {
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
@@ -83,11 +81,11 @@ SECTIONS
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
 	 */
-	.exit.text : {
+	.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
 		EXIT_TEXT
 	}
 
-	.init.data : {
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
 		INIT_DATA
 		__vtop_table_begin = .;
 		*(.vtop_fixup);
@@ -103,19 +101,19 @@ SECTIONS
 	}
 
 	. = ALIGN(16);
-	.init.setup : {
+	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
 		__setup_start = .;
 		*(.init.setup)
 		__setup_end = .;
 	}
 
-	.initcall.init : {
+	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
 		__initcall_start = .;
 		INITCALLS
 		__initcall_end = .;
 		}
 
-	.con_initcall.init : {
+	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
 		__con_initcall_start = .;
 		*(.con_initcall.init)
 		__con_initcall_end = .;
@@ -124,14 +122,14 @@ SECTIONS
 	SECURITY_INIT
 
 	. = ALIGN(8);
-	__ftr_fixup : {
+	__ftr_fixup : AT(ADDR(__ftr_fixup) - LOAD_OFFSET) {
 		__start___ftr_fixup = .;
 		*(__ftr_fixup)
 		__stop___ftr_fixup = .;
 	}
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
-	__fw_ftr_fixup : {
+	__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
 		__start___fw_ftr_fixup = .;
 		*(__fw_ftr_fixup)
 		__stop___fw_ftr_fixup = .;
@@ -139,14 +137,14 @@ SECTIONS
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
 	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
+	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
 		__initramfs_start = .;
 		*(.init.ramfs)
 		__initramfs_end = .;
 	}
 #endif
 	. = ALIGN(PAGE_SIZE);
-	.data.percpu : {
+	.data.percpu  : AT(ADDR(.data.percpu) - LOAD_OFFSET) {
 		__per_cpu_start = .;
 		*(.data.percpu)
 		*(.data.percpu.shared_aligned)
@@ -154,7 +152,7 @@ SECTIONS
 	}
 
 	. = ALIGN(8);
-	.machine.desc : {
+	.machine.desc : AT(ADDR(.machine.desc) - LOAD_OFFSET) {
 		__machine_desc_start = . ;
 		*(.machine.desc)
 		__machine_desc_end = . ;
@@ -172,25 +170,24 @@ SECTIONS
 	_sdata = .;
 
 #ifdef CONFIG_PPC32
-	.data    :
-	{
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {
 		DATA_DATA
 		*(.sdata)
 		*(.got.plt) *(.got)
 	}
 #else
-	.data : {
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {
 		DATA_DATA
 		*(.data.rel*)
 		*(.toc1)
 		*(.branch_lt)
 	}
 
-	.opd : {
+	.opd : AT(ADDR(.opd) - LOAD_OFFSET) {
 		*(.opd)
 	}
 
-	.got : {
+	.got : AT(ADDR(.got) - LOAD_OFFSET) {
 		__toc_start = .;
 		*(.got)
 		*(.toc)
@@ -207,26 +204,26 @@ SECTIONS
 #else
 	. = ALIGN(16384);
 #endif
-	.data.init_task : {
+	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
 		*(.data.init_task)
 	}
 
 	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
+	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
 		*(.data.page_aligned)
 	}
 
-	.data.cacheline_aligned : {
+	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
 		*(.data.cacheline_aligned)
 	}
 
 	. = ALIGN(L1_CACHE_BYTES);
-	.data.read_mostly : {
+	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
 		*(.data.read_mostly)
 	}
 
 	. = ALIGN(PAGE_SIZE);
-	__data_nosave : {
+	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
 		__nosave_begin = .;
 		*(.data.nosave)
 		. = ALIGN(PAGE_SIZE);
@@ -237,7 +234,7 @@ SECTIONS
  * And finally the bss
  */
 
-	.bss : {
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
 		__bss_start = .;
 		*(.sbss) *(.scommon)
 		*(.dynbss)
diff --git a/arch/powerpc/lib/rheap.c b/arch/powerpc/lib/rheap.c
index 22c3b4f53de7..29b2941cada0 100644
--- a/arch/powerpc/lib/rheap.c
+++ b/arch/powerpc/lib/rheap.c
@@ -54,7 +54,7 @@ static int grow(rh_info_t * info, int max_blocks)
 
 	new_blocks = max_blocks - info->max_blocks;
 
-	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_KERNEL);
+	block = kmalloc(sizeof(rh_block_t) * max_blocks, GFP_ATOMIC);
 	if (block == NULL)
 		return -ENOMEM;
 
@@ -258,7 +258,7 @@ rh_info_t *rh_create(unsigned int alignment)
 	if ((alignment & (alignment - 1)) != 0)
 		return ERR_PTR(-EINVAL);
 
-	info = kmalloc(sizeof(*info), GFP_KERNEL);
+	info = kmalloc(sizeof(*info), GFP_ATOMIC);
 	if (info == NULL)
 		return ERR_PTR(-ENOMEM);
 
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index c4c622d8e6ac..49eb1f1a2bb4 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -75,6 +75,20 @@ _GLOBAL(strcmp)
 	beq	1b
 	blr
 
+_GLOBAL(strncmp)
+	PPC_LCMPI r5,0
+	beqlr
+	mtctr	r5
+	addi	r5,r3,-1
+	addi	r4,r4,-1
+1:	lbzu	r3,1(r5)
+	cmpwi	1,r3,0
+	lbzu	r0,1(r4)
+	subf.	r3,r0,r3
+	beqlr	1
+	bdnzt	eq,1b
+	blr
+
 _GLOBAL(strlen)
 	addi	r4,r3,-1
 1:	lbzu	r0,1(r4)
diff --git a/arch/powerpc/math-emu/fabs.c b/arch/powerpc/math-emu/fabs.c
index 41f0617f3d3a..549baba5948f 100644
--- a/arch/powerpc/math-emu/fabs.c
+++ b/arch/powerpc/math-emu/fabs.c
@@ -9,7 +9,7 @@ fabs(u32 *frD, u32 *frB)
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index fc8836488b64..7befbbf2c332 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -14,7 +14,7 @@ fadd(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fadds.c b/arch/powerpc/math-emu/fadds.c
index 93025b6c8f3c..2b346b38b480 100644
--- a/arch/powerpc/math-emu/fadds.c
+++ b/arch/powerpc/math-emu/fadds.c
@@ -15,7 +15,7 @@ fadds(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index 4efac394b4cb..36d689044c63 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -15,7 +15,7 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fcmpu.c b/arch/powerpc/math-emu/fcmpu.c
index b7e33176e618..53d93894f2a6 100644
--- a/arch/powerpc/math-emu/fcmpu.c
+++ b/arch/powerpc/math-emu/fcmpu.c
@@ -14,7 +14,7 @@ fcmpu(u32 *ccr, int crfD, void *frA, void *frB)
 	long cmp;
 
 #ifdef DEBUG
-	printk("%s: %p (%08x) %d %p %p\n", __FUNCTION__, ccr, *ccr, crfD, frA, frB);
+	printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fctiw.c b/arch/powerpc/math-emu/fctiw.c
index 3b3c98b840cf..fcd7a95e021d 100644
--- a/arch/powerpc/math-emu/fctiw.c
+++ b/arch/powerpc/math-emu/fctiw.c
@@ -16,7 +16,7 @@ fctiw(u32 *frD, void *frB)
 	frD[1] = r;
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fctiwz.c b/arch/powerpc/math-emu/fctiwz.c
index 7717eb6fcfb6..1514d59e146e 100644
--- a/arch/powerpc/math-emu/fctiwz.c
+++ b/arch/powerpc/math-emu/fctiwz.c
@@ -23,7 +23,7 @@ fctiwz(u32 *frD, void *frB)
 	__FPU_FPSCR = fpscr;
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index f2fba825b2d0..18a20fe396b0 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -14,7 +14,7 @@ fdiv(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
@@ -28,13 +28,13 @@ fdiv(void *frD, void *frA, void *frB)
 	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
 		ret |= EFLAG_VXZDZ;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXZDZ raised\n", __func__);
 #endif
 	}
 	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
 		ret |= EFLAG_VXIDI;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXIDI raised\n", __func__);
 #endif
 	}
 
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index b971196e3175..24feed689c35 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -15,7 +15,7 @@ fdivs(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
@@ -29,13 +29,13 @@ fdivs(void *frD, void *frA, void *frB)
 	if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
 		ret |= EFLAG_VXZDZ;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXZDZ raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXZDZ raised\n", __func__);
 #endif
 	}
 	if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
 		ret |= EFLAG_VXIDI;
 #ifdef DEBUG
-		printk("%s: FPSCR_VXIDI raised\n", __FUNCTION__);
+		printk("%s: FPSCR_VXIDI raised\n", __func__);
 #endif
 	}
 
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index 0a1dbce793e9..dedb465fdc68 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -16,7 +16,7 @@ fmadd(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index 0f70bba9445e..6bbb56d5502c 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -17,7 +17,7 @@ fmadds(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmr.c b/arch/powerpc/math-emu/fmr.c
index 28df700c0c7e..bd55384b8196 100644
--- a/arch/powerpc/math-emu/fmr.c
+++ b/arch/powerpc/math-emu/fmr.c
@@ -9,7 +9,7 @@ fmr(u32 *frD, u32 *frB)
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index 203fd48a6fec..f311e2c7e67e 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -16,7 +16,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 8ce68624c189..81a716d3ee2e 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -17,7 +17,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 66c7e79aae2e..2f3d32784a04 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -14,7 +14,7 @@ fmul(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 26bc4278271c..962b5883f784 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -15,7 +15,7 @@ fmuls(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnabs.c b/arch/powerpc/math-emu/fnabs.c
index c6b913d179e0..a7d34f3d9499 100644
--- a/arch/powerpc/math-emu/fnabs.c
+++ b/arch/powerpc/math-emu/fnabs.c
@@ -9,7 +9,7 @@ fnabs(u32 *frD, u32 *frB)
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fneg.c b/arch/powerpc/math-emu/fneg.c
index fe9a98deff69..1e988cd9c6cc 100644
--- a/arch/powerpc/math-emu/fneg.c
+++ b/arch/powerpc/math-emu/fneg.c
@@ -9,7 +9,7 @@ fneg(u32 *frD, u32 *frB)
 	frD[1] = frB[1];
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p: ", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p: ", __func__, frD, frB);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 7f312276d920..8cf7827c4fb5 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -16,7 +16,7 @@ fnmadd(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index 65454c9c70bc..f1c4f0f0d807 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -17,7 +17,7 @@ fnmadds(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index f1ca7482b5f0..98944e6e2601 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -16,7 +16,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index 5c9a09a87dc7..b20f4eb63fb9 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -17,7 +17,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fres.c b/arch/powerpc/math-emu/fres.c
index ec11e46d20af..10ecbd08b79e 100644
--- a/arch/powerpc/math-emu/fres.c
+++ b/arch/powerpc/math-emu/fres.c
@@ -6,7 +6,7 @@ int
 fres(void *frD, void *frB)
 {
 #ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p\n", __func__, frD, frB);
 #endif
 	return -ENOSYS;
 }
diff --git a/arch/powerpc/math-emu/frsp.c b/arch/powerpc/math-emu/frsp.c
index d879b2a3d0c9..724ccbc0468e 100644
--- a/arch/powerpc/math-emu/frsp.c
+++ b/arch/powerpc/math-emu/frsp.c
@@ -12,7 +12,7 @@ frsp(void *frD, void *frB)
 	FP_DECL_D(B);
 
 #ifdef DEBUG
-	printk("%s: D %p, B %p\n", __FUNCTION__, frD, frB);
+	printk("%s: D %p, B %p\n", __func__, frD, frB);
 #endif
 
 	__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/frsqrte.c b/arch/powerpc/math-emu/frsqrte.c
index a11ae1829850..1d0a3a0fd0e6 100644
--- a/arch/powerpc/math-emu/frsqrte.c
+++ b/arch/powerpc/math-emu/frsqrte.c
@@ -6,7 +6,7 @@ int
 frsqrte(void *frD, void *frB)
 {
 #ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p\n", __func__, frD, frB);
 #endif
 	return 0;
 }
diff --git a/arch/powerpc/math-emu/fsel.c b/arch/powerpc/math-emu/fsel.c
index e36e6e72819a..ecb5f28eb1f3 100644
--- a/arch/powerpc/math-emu/fsel.c
+++ b/arch/powerpc/math-emu/fsel.c
@@ -11,7 +11,7 @@ fsel(u32 *frD, void *frA, u32 *frB, u32 *frC)
 	FP_DECL_D(A);
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frA, frB, frC);
+	printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 6f8319f64a8a..38ec2b752e9d 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -13,7 +13,7 @@ fsqrt(void *frD, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p %p %p\n", __func__, frD, frB);
 #endif
 
 	__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 3b2b1cf55c12..335263e06ee5 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -14,7 +14,7 @@ fsqrts(void *frD, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p %p\n", __FUNCTION__, frD, frB);
+	printk("%s: %p %p %p %p\n", __func__, frD, frB);
 #endif
 
 	__FP_UNPACK_D(B, frB);
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 956679042bb2..208d20fc52a5 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -14,7 +14,7 @@ fsub(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index 3428117dfe8c..0e61b808c44b 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -15,7 +15,7 @@ fsubs(void *frD, void *frA, void *frB)
 	int ret = 0;
 
 #ifdef DEBUG
-	printk("%s: %p %p %p\n", __FUNCTION__, frD, frA, frB);
+	printk("%s: %p %p %p\n", __func__, frD, frA, frB);
 #endif
 
 	__FP_UNPACK_D(A, frA);
diff --git a/arch/powerpc/math-emu/lfd.c b/arch/powerpc/math-emu/lfd.c
index 7d38101c329b..6ec90b57c61a 100644
--- a/arch/powerpc/math-emu/lfd.c
+++ b/arch/powerpc/math-emu/lfd.c
@@ -11,7 +11,7 @@ lfd(void *frD, void *ea)
 	if (copy_from_user(frD, ea, sizeof(double)))
 		return -EFAULT;
 #ifdef DEBUG
-	printk("%s: D %p, ea %p: ", __FUNCTION__, frD, ea);
+	printk("%s: D %p, ea %p: ", __func__, frD, ea);
 	dump_double(frD);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/lfs.c b/arch/powerpc/math-emu/lfs.c
index c86dee3d7655..6f18ebe3a7ff 100644
--- a/arch/powerpc/math-emu/lfs.c
+++ b/arch/powerpc/math-emu/lfs.c
@@ -14,7 +14,7 @@ lfs(void *frD, void *ea)
 	float f;
 
 #ifdef DEBUG
-	printk("%s: D %p, ea %p\n", __FUNCTION__, frD, ea);
+	printk("%s: D %p, ea %p\n", __func__, frD, ea);
 #endif
 
 	if (copy_from_user(&f, ea, sizeof(float)))
diff --git a/arch/powerpc/math-emu/mcrfs.c b/arch/powerpc/math-emu/mcrfs.c
index 106dd912914b..41ba247faf89 100644
--- a/arch/powerpc/math-emu/mcrfs.c
+++ b/arch/powerpc/math-emu/mcrfs.c
@@ -10,7 +10,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS)
 	u32 value, clear;
 
 #ifdef DEBUG
-	printk("%s: %p (%08x) %d %d\n", __FUNCTION__, ccr, *ccr, crfD, crfS);
+	printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
 #endif
 
 	clear = 15 << ((7 - crfS) << 2);
@@ -24,7 +24,7 @@ mcrfs(u32 *ccr, u32 crfD, u32 crfS)
 	*ccr |= (value << ((7 - crfD) << 2));
 
 #ifdef DEBUG
-	printk("CR: %08x\n", __FUNCTION__, *ccr);
+	printk("CR: %08x\n", __func__, *ccr);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mffs.c b/arch/powerpc/math-emu/mffs.c
index f477c9170e75..b0e2106e6eb6 100644
--- a/arch/powerpc/math-emu/mffs.c
+++ b/arch/powerpc/math-emu/mffs.c
@@ -10,7 +10,7 @@ mffs(u32 *frD)
 	frD[1] = __FPU_FPSCR;
 
 #ifdef DEBUG
-	printk("%s: frD %p: %08x.%08x\n", __FUNCTION__, frD, frD[0], frD[1]);
+	printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsb0.c b/arch/powerpc/math-emu/mtfsb0.c
index 99bfd80f4af3..d3062350ea21 100644
--- a/arch/powerpc/math-emu/mtfsb0.c
+++ b/arch/powerpc/math-emu/mtfsb0.c
@@ -11,7 +11,7 @@ mtfsb0(int crbD)
 		__FPU_FPSCR &= ~(1 << (31 - crbD));
 
 #ifdef DEBUG
-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+	printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsb1.c b/arch/powerpc/math-emu/mtfsb1.c
index 3d9e7ed92d2b..2e948704b56e 100644
--- a/arch/powerpc/math-emu/mtfsb1.c
+++ b/arch/powerpc/math-emu/mtfsb1.c
@@ -11,7 +11,7 @@ mtfsb1(int crbD)
 		__FPU_FPSCR |= (1 << (31 - crbD));
 
 #ifdef DEBUG
-	printk("%s: %d %08lx\n", __FUNCTION__, crbD, __FPU_FPSCR);
+	printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsf.c b/arch/powerpc/math-emu/mtfsf.c
index d70cf714994c..48014d8e3af1 100644
--- a/arch/powerpc/math-emu/mtfsf.c
+++ b/arch/powerpc/math-emu/mtfsf.c
@@ -38,7 +38,7 @@ mtfsf(unsigned int FM, u32 *frB)
 	__FPU_FPSCR |= (frB[1] & mask);
 
 #ifdef DEBUG
-	printk("%s: %02x %p: %08lx\n", __FUNCTION__, FM, frB, __FPU_FPSCR);
+	printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/mtfsfi.c b/arch/powerpc/math-emu/mtfsfi.c
index 71df854baa7e..031e20093549 100644
--- a/arch/powerpc/math-emu/mtfsfi.c
+++ b/arch/powerpc/math-emu/mtfsfi.c
@@ -16,7 +16,7 @@ mtfsfi(unsigned int crfD, unsigned int IMM)
 	__FPU_FPSCR |= (IMM & 0xf) << ((7 - crfD) << 2);
 
 #ifdef DEBUG
-	printk("%s: %d %x: %08lx\n", __FUNCTION__, crfD, IMM, __FPU_FPSCR);
+	printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
 #endif
 
 	return 0;
diff --git a/arch/powerpc/math-emu/stfd.c b/arch/powerpc/math-emu/stfd.c
index 3f8c2558a9e8..33a165c8df0f 100644
--- a/arch/powerpc/math-emu/stfd.c
+++ b/arch/powerpc/math-emu/stfd.c
@@ -7,7 +7,7 @@ stfd(void *frS, void *ea)
 {
 #if 0
 #ifdef DEBUG
-	printk("%s: S %p, ea %p: ", __FUNCTION__, frS, ea);
+	printk("%s: S %p, ea %p: ", __func__, frS, ea);
 	dump_double(frS);
 	printk("\n");
 #endif
diff --git a/arch/powerpc/math-emu/stfiwx.c b/arch/powerpc/math-emu/stfiwx.c
index 95caaeec6a08..f15a35f67e2c 100644
--- a/arch/powerpc/math-emu/stfiwx.c
+++ b/arch/powerpc/math-emu/stfiwx.c
@@ -6,7 +6,7 @@ int
 stfiwx(u32 *frS, void *ea)
 {
 #ifdef DEBUG
-	printk("%s: %p %p\n", __FUNCTION__, frS, ea);
+	printk("%s: %p %p\n", __func__, frS, ea);
 #endif
 
 	if (copy_to_user(ea, &frS[1], sizeof(frS[1])))
diff --git a/arch/powerpc/math-emu/stfs.c b/arch/powerpc/math-emu/stfs.c
index e87ca23c6dc3..8689aa48ef69 100644
--- a/arch/powerpc/math-emu/stfs.c
+++ b/arch/powerpc/math-emu/stfs.c
@@ -15,7 +15,7 @@ stfs(void *frS, void *ea)
 	int err;
 
 #ifdef DEBUG
-	printk("%s: S %p, ea %p\n", __FUNCTION__, frS, ea);
+	printk("%s: S %p, ea %p\n", __func__, frS, ea);
 #endif
 
 	__FP_UNPACK_D(A, frS);
diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c
index 3899ea97fbdf..cecbbc76f624 100644
--- a/arch/powerpc/mm/40x_mmu.c
+++ b/arch/powerpc/mm/40x_mmu.c
@@ -97,7 +97,7 @@ unsigned long __init mmu_mapin_ram(void)
 	phys_addr_t p;
 
 	v = KERNELBASE;
-	p = PPC_MEMSTART;
+	p = 0;
 	s = total_lowmem;
 
 	if (__map_without_ltlbs)
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 04dc08798d3d..953fb919eb06 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -67,7 +67,7 @@ unsigned long __init mmu_mapin_ram(void)
 
 	/* Pin in enough TLBs to cover any lowmem not covered by the
 	 * initial 256M mapping established in head_44x.S */
-	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
+	for (addr = PPC_PIN_SIZE; addr < lowmem_end_addr;
 	     addr += PPC_PIN_SIZE)
 		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
 
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 41649a5d3602..1c00e0196f6c 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,7 +6,7 @@ ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS	+= -mno-minimal-toc
 endif
 
-obj-y				:= fault.o mem.o lmb.o \
+obj-y				:= fault.o mem.o \
 				   init_$(CONFIG_WORD_SIZE).o \
 				   pgtable_$(CONFIG_WORD_SIZE).o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index c93a966b7e4b..ada249bf9779 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -49,18 +49,15 @@
 #include <asm/mmu.h>
 #include <asm/uaccess.h>
 #include <asm/smp.h>
-#include <asm/bootx.h>
 #include <asm/machdep.h>
 #include <asm/setup.h>
 
+#include "mmu_decl.h"
+
 extern void loadcam_entry(unsigned int index);
 unsigned int tlbcam_index;
 unsigned int num_tlbcam_entries;
 static unsigned long __cam0, __cam1, __cam2;
-extern unsigned long total_lowmem;
-extern unsigned long __max_low_memory;
-extern unsigned long __initial_memory_limit;
-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
 
 #define NUM_TLBCAMS	(16)
 
@@ -165,15 +162,15 @@ void invalidate_tlbcam_entry(int index)
 void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1,
 		unsigned long cam2)
 {
-	settlbcam(0, PAGE_OFFSET, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0);
+	settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0);
 	tlbcam_index++;
 	if (cam1) {
 		tlbcam_index++;
-		settlbcam(1, PAGE_OFFSET+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0);
+		settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0);
 	}
 	if (cam2) {
 		tlbcam_index++;
-		settlbcam(2, PAGE_OFFSET+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0);
+		settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0);
 	}
 }
 
@@ -196,35 +193,32 @@ unsigned long __init mmu_mapin_ram(void)
 void __init
 adjust_total_lowmem(void)
 {
-	unsigned long max_low_mem = MAX_LOW_MEM;
-	unsigned long cam_max = 0x10000000;
-	unsigned long ram;
+	phys_addr_t max_lowmem_size = __max_low_memory;
+	phys_addr_t cam_max_size = 0x10000000;
+	phys_addr_t ram;
 
-	/* adjust CAM size to max_low_mem */
-	if (max_low_mem < cam_max)
-		cam_max = max_low_mem;
+	/* adjust CAM size to max_lowmem_size */
+	if (max_lowmem_size < cam_max_size)
+		cam_max_size = max_lowmem_size;
 
-	/* adjust lowmem size to max_low_mem */
-	if (max_low_mem < total_lowmem)
-		ram = max_low_mem;
-	else
-		ram = total_lowmem;
+	/* adjust lowmem size to max_lowmem_size */
+	ram = min(max_lowmem_size, total_lowmem);
 
 	/* Calculate CAM values */
 	__cam0 = 1UL << 2 * (__ilog2(ram) / 2);
-	if (__cam0 > cam_max)
-		__cam0 = cam_max;
+	if (__cam0 > cam_max_size)
+		__cam0 = cam_max_size;
 	ram -= __cam0;
 	if (ram) {
 		__cam1 = 1UL << 2 * (__ilog2(ram) / 2);
-		if (__cam1 > cam_max)
-			__cam1 = cam_max;
+		if (__cam1 > cam_max_size)
+			__cam1 = cam_max_size;
 		ram -= __cam1;
 	}
 	if (ram) {
 		__cam2 = 1UL << 2 * (__ilog2(ram) / 2);
-		if (__cam2 > cam_max)
-			__cam2 = cam_max;
+		if (__cam2 > cam_max_size)
+			__cam2 = cam_max_size;
 		ram -= __cam2;
 	}
 
@@ -232,6 +226,6 @@ adjust_total_lowmem(void)
 			" CAM2=%ldMb residual: %ldMb\n",
 			__cam0 >> 20, __cam1 >> 20, __cam2 >> 20,
 			(total_lowmem - __cam0 - __cam1 - __cam2) >> 20);
-	__max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2;
-	__initial_memory_limit = __max_low_memory;
+	__max_low_memory = __cam0 + __cam1 + __cam2;
+	__initial_memory_limit_addr = memstart_addr + __max_low_memory;
 }
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 7f830a4888d6..e10d76a860d3 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -44,6 +44,9 @@ mmu_hash_lock:
 #ifdef CONFIG_SMP
 	.text
 _GLOBAL(hash_page_sync)
+	mfmsr   r10
+	rlwinm  r0,r10,0,17,15          /* clear bit 16 (MSR_EE) */
+	mtmsr   r0
 	lis	r8,mmu_hash_lock@h
 	ori	r8,r8,mmu_hash_lock@l
 	lis	r0,0x0fff
@@ -60,8 +63,9 @@ _GLOBAL(hash_page_sync)
 	eieio
 	li	r0,0
 	stw	r0,0(r8)
-	blr	
-#endif
+	mtmsr	r10
+	blr
+#endif /* CONFIG_SMP */
 
 /*
  * Load a PTE into the hash table, if possible.
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 32f416175db1..2b5a399f6fa6 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -31,6 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
+#include <linux/lmb.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -41,7 +42,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/abs_addr.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
@@ -191,6 +192,29 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 	return ret < 0 ? ret : 0;
 }
 
+#ifdef CONFIG_MEMORY_HOTPLUG
+static int htab_remove_mapping(unsigned long vstart, unsigned long vend,
+		      int psize, int ssize)
+{
+	unsigned long vaddr;
+	unsigned int step, shift;
+
+	shift = mmu_psize_defs[psize].shift;
+	step = 1 << shift;
+
+	if (!ppc_md.hpte_removebolted) {
+		printk(KERN_WARNING "Platform doesn't implement "
+				"hpte_removebolted\n");
+		return -EINVAL;
+	}
+
+	for (vaddr = vstart; vaddr < vend; vaddr += step)
+		ppc_md.hpte_removebolted(vaddr, psize, ssize);
+
+	return 0;
+}
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
 static int __init htab_dt_scan_seg_sizes(unsigned long node,
 					 const char *uname, int depth,
 					 void *data)
@@ -351,9 +375,14 @@ static void __init htab_init_page_sizes(void)
 		mmu_vmalloc_psize = MMU_PAGE_64K;
 		if (mmu_linear_psize == MMU_PAGE_4K)
 			mmu_linear_psize = MMU_PAGE_64K;
-		if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE))
-			mmu_io_psize = MMU_PAGE_64K;
-		else
+		if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) {
+			/*
+			 * Don't use 64k pages for ioremap on pSeries, since
+			 * that would stop us accessing the HEA ethernet.
+			 */
+			if (!machine_is(pseries))
+				mmu_io_psize = MMU_PAGE_64K;
+		} else
 			mmu_ci_restrictions = 1;
 	}
 #endif /* CONFIG_PPC_64K_PAGES */
@@ -429,6 +458,12 @@ void create_section_mapping(unsigned long start, unsigned long end)
 			_PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX,
 			mmu_linear_psize, mmu_kernel_ssize));
 }
+
+int remove_section_mapping(unsigned long start, unsigned long end)
+{
+	return htab_remove_mapping(start, end, mmu_linear_psize,
+			mmu_kernel_ssize);
+}
 #endif /* CONFIG_MEMORY_HOTPLUG */
 
 static inline void make_bl(unsigned int *insn_addr, void *func)
@@ -506,10 +541,10 @@ void __init htab_initialize(void)
 	} else {
 		/* Find storage for the HPT.  Must be contiguous in
 		 * the absolute address space. On cell we want it to be
-		 * in the first 1 Gig.
+		 * in the first 2 Gig so we can use it for IOMMU hacks.
 		 */
 		if (machine_is(cell))
-			limit = 0x40000000;
+			limit = 0x80000000;
 		else
 			limit = 0;
 
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 977cb1ee5e72..47325f23c51f 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -30,6 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -41,7 +42,6 @@
 #include <asm/machdep.h>
 #include <asm/btext.h>
 #include <asm/tlb.h>
-#include <asm/lmb.h>
 #include <asm/sections.h>
 
 #include "mmu_decl.h"
@@ -59,8 +59,8 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 unsigned long total_memory;
 unsigned long total_lowmem;
 
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
+phys_addr_t memstart_addr;
+phys_addr_t lowmem_end_addr;
 
 int boot_mapsize;
 #ifdef CONFIG_PPC_PMAC
@@ -95,10 +95,10 @@ int __map_without_ltlbs;
 unsigned long __max_low_memory = MAX_LOW_MEM;
 
 /*
- * limit of what is accessible with initial MMU setup -
+ * address of the limit of what is accessible with initial MMU setup -
  * 256MB usually, but only 16MB on 601.
  */
-unsigned long __initial_memory_limit = 0x10000000;
+phys_addr_t __initial_memory_limit_addr = (phys_addr_t)0x10000000;
 
 /*
  * Check for command-line options that affect what MMU_init will do.
@@ -131,10 +131,10 @@ void __init MMU_init(void)
 
 	/* 601 can only access 16MB at the moment */
 	if (PVR_VER(mfspr(SPRN_PVR)) == 1)
-		__initial_memory_limit = 0x01000000;
+		__initial_memory_limit_addr = 0x01000000;
 	/* 8xx can only access 8MB at the moment */
 	if (PVR_VER(mfspr(SPRN_PVR)) == 0x50)
-		__initial_memory_limit = 0x00800000;
+		__initial_memory_limit_addr = 0x00800000;
 
 	/* parse args from command line */
 	MMU_setup();
@@ -145,8 +145,8 @@ void __init MMU_init(void)
 		printk(KERN_WARNING "Only using first contiguous memory region");
 	}
 
-	total_memory = lmb_end_of_DRAM();
-	total_lowmem = total_memory;
+	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+	lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
 	/* Freescale Book-E parts expect lowmem to be mapped by fixed TLB
@@ -157,9 +157,10 @@ void __init MMU_init(void)
 
 	if (total_lowmem > __max_low_memory) {
 		total_lowmem = __max_low_memory;
+		lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
-		lmb_enforce_memory_limit(total_lowmem);
+		lmb_enforce_memory_limit(lowmem_end_addr);
 		lmb_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
@@ -184,8 +185,6 @@ void __init MMU_init(void)
 	/* Map in I/O resources */
 	if (ppc_md.progress)
 		ppc_md.progress("MMU:setio", 0x302);
-	if (ppc_md.setup_io_mappings)
-		ppc_md.setup_io_mappings();
 
 	/* Initialize the context management stuff */
 	mmu_context_init();
@@ -208,7 +207,7 @@ void __init *early_get_page(void)
 		p = alloc_bootmem_pages(PAGE_SIZE);
 	} else {
 		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
-					__initial_memory_limit));
+					__initial_memory_limit_addr));
 	}
 	return p;
 }
@@ -276,7 +275,7 @@ static int __init setup_kcore(void)
 
 		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
 		if (!kcore_mem)
-			panic("%s: kmalloc failed\n", __FUNCTION__);
+			panic("%s: kmalloc failed\n", __func__);
 
 		/* must stay under 32 bits */
 		if ( 0xfffffffful - (unsigned long)__va(base) < size) {
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c0f5cff77035..698bd000f98b 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -38,11 +38,11 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/page.h>
 #include <asm/prom.h>
-#include <asm/lmb.h>
 #include <asm/rtas.h>
 #include <asm/io.h>
 #include <asm/mmu_context.h>
@@ -72,8 +72,7 @@
 #warning TASK_SIZE is smaller than it needs to be.
 #endif
 
-/* max amount of RAM to use */
-unsigned long __max_memory;
+phys_addr_t memstart_addr;
 
 void free_initmem(void)
 {
@@ -122,7 +121,7 @@ static int __init setup_kcore(void)
 		/* GFP_ATOMIC to avoid might_sleep warnings during boot */
 		kcore_mem = kmalloc(sizeof(struct kcore_list), GFP_ATOMIC);
 		if (!kcore_mem)
-			panic("%s: kmalloc failed\n", __FUNCTION__);
+			panic("%s: kmalloc failed\n", __func__);
 
 		kclist_add(kcore_mem, __va(base), size);
 	}
diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c
deleted file mode 100644
index 4ce23bcf8a57..000000000000
--- a/arch/powerpc/mm/lmb.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Procedures for maintaining information about logical memory blocks.
- *
- * Peter Bergner, IBM Corp.	June 2001.
- * Copyright (C) 2001 Peter Bergner.
- * 
- *      This program is free software; you can redistribute it and/or
- *      modify it under the terms of the GNU General Public License
- *      as published by the Free Software Foundation; either version
- *      2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#ifdef CONFIG_PPC32
-#include "mmu_decl.h"		/* for __max_low_memory */
-#endif
-
-#undef DEBUG
-
-#ifdef DEBUG
-#include <asm/udbg.h>
-#define DBG(fmt...) udbg_printf(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
-#define LMB_ALLOC_ANYWHERE	0
-
-struct lmb lmb;
-
-void lmb_dump_all(void)
-{
-#ifdef DEBUG
-	unsigned long i;
-
-	DBG("lmb_dump_all:\n");
-	DBG("    memory.cnt		  = 0x%lx\n", lmb.memory.cnt);
-	DBG("    memory.size		  = 0x%lx\n", lmb.memory.size);
-	for (i=0; i < lmb.memory.cnt ;i++) {
-		DBG("    memory.region[0x%x].base       = 0x%lx\n",
-			    i, lmb.memory.region[i].base);
-		DBG("		      .size     = 0x%lx\n",
-			    lmb.memory.region[i].size);
-	}
-
-	DBG("\n    reserved.cnt	  = 0x%lx\n", lmb.reserved.cnt);
-	DBG("    reserved.size	  = 0x%lx\n", lmb.reserved.size);
-	for (i=0; i < lmb.reserved.cnt ;i++) {
-		DBG("    reserved.region[0x%x].base       = 0x%lx\n",
-			    i, lmb.reserved.region[i].base);
-		DBG("		      .size     = 0x%lx\n",
-			    lmb.reserved.region[i].size);
-	}
-#endif /* DEBUG */
-}
-
-static unsigned long __init lmb_addrs_overlap(unsigned long base1,
-		unsigned long size1, unsigned long base2, unsigned long size2)
-{
-	return ((base1 < (base2+size2)) && (base2 < (base1+size1)));
-}
-
-static long __init lmb_addrs_adjacent(unsigned long base1, unsigned long size1,
-		unsigned long base2, unsigned long size2)
-{
-	if (base2 == base1 + size1)
-		return 1;
-	else if (base1 == base2 + size2)
-		return -1;
-
-	return 0;
-}
-
-static long __init lmb_regions_adjacent(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
-{
-	unsigned long base1 = rgn->region[r1].base;
-	unsigned long size1 = rgn->region[r1].size;
-	unsigned long base2 = rgn->region[r2].base;
-	unsigned long size2 = rgn->region[r2].size;
-
-	return lmb_addrs_adjacent(base1, size1, base2, size2);
-}
-
-static void __init lmb_remove_region(struct lmb_region *rgn, unsigned long r)
-{
-	unsigned long i;
-
-	for (i = r; i < rgn->cnt - 1; i++) {
-		rgn->region[i].base = rgn->region[i + 1].base;
-		rgn->region[i].size = rgn->region[i + 1].size;
-	}
-	rgn->cnt--;
-}
-
-/* Assumption: base addr of region 1 < base addr of region 2 */
-static void __init lmb_coalesce_regions(struct lmb_region *rgn,
-		unsigned long r1, unsigned long r2)
-{
-	rgn->region[r1].size += rgn->region[r2].size;
-	lmb_remove_region(rgn, r2);
-}
-
-/* This routine called with relocation disabled. */
-void __init lmb_init(void)
-{
-	/* Create a dummy zero size LMB which will get coalesced away later.
-	 * This simplifies the lmb_add() code below...
-	 */
-	lmb.memory.region[0].base = 0;
-	lmb.memory.region[0].size = 0;
-	lmb.memory.cnt = 1;
-
-	/* Ditto. */
-	lmb.reserved.region[0].base = 0;
-	lmb.reserved.region[0].size = 0;
-	lmb.reserved.cnt = 1;
-}
-
-/* This routine may be called with relocation disabled. */
-void __init lmb_analyze(void)
-{
-	int i;
-
-	lmb.memory.size = 0;
-
-	for (i = 0; i < lmb.memory.cnt; i++)
-		lmb.memory.size += lmb.memory.region[i].size;
-}
-
-/* This routine called with relocation disabled. */
-static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base,
-				  unsigned long size)
-{
-	unsigned long coalesced = 0;
-	long adjacent, i;
-
-	/* First try and coalesce this LMB with another. */
-	for (i=0; i < rgn->cnt; i++) {
-		unsigned long rgnbase = rgn->region[i].base;
-		unsigned long rgnsize = rgn->region[i].size;
-
-		if ((rgnbase == base) && (rgnsize == size))
-			/* Already have this region, so we're done */
-			return 0;
-
-		adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize);
-		if ( adjacent > 0 ) {
-			rgn->region[i].base -= size;
-			rgn->region[i].size += size;
-			coalesced++;
-			break;
-		}
-		else if ( adjacent < 0 ) {
-			rgn->region[i].size += size;
-			coalesced++;
-			break;
-		}
-	}
-
-	if ((i < rgn->cnt-1) && lmb_regions_adjacent(rgn, i, i+1) ) {
-		lmb_coalesce_regions(rgn, i, i+1);
-		coalesced++;
-	}
-
-	if (coalesced)
-		return coalesced;
-	if (rgn->cnt >= MAX_LMB_REGIONS)
-		return -1;
-
-	/* Couldn't coalesce the LMB, so add it to the sorted table. */
-	for (i = rgn->cnt-1; i >= 0; i--) {
-		if (base < rgn->region[i].base) {
-			rgn->region[i+1].base = rgn->region[i].base;
-			rgn->region[i+1].size = rgn->region[i].size;
-		} else {
-			rgn->region[i+1].base = base;
-			rgn->region[i+1].size = size;
-			break;
-		}
-	}
-	rgn->cnt++;
-
-	return 0;
-}
-
-/* This routine may be called with relocation disabled. */
-long __init lmb_add(unsigned long base, unsigned long size)
-{
-	struct lmb_region *_rgn = &(lmb.memory);
-
-	/* On pSeries LPAR systems, the first LMB is our RMO region. */
-	if (base == 0)
-		lmb.rmo_size = size;
-
-	return lmb_add_region(_rgn, base, size);
-
-}
-
-long __init lmb_reserve(unsigned long base, unsigned long size)
-{
-	struct lmb_region *_rgn = &(lmb.reserved);
-
-	BUG_ON(0 == size);
-
-	return lmb_add_region(_rgn, base, size);
-}
-
-long __init lmb_overlaps_region(struct lmb_region *rgn, unsigned long base,
-				unsigned long size)
-{
-	unsigned long i;
-
-	for (i=0; i < rgn->cnt; i++) {
-		unsigned long rgnbase = rgn->region[i].base;
-		unsigned long rgnsize = rgn->region[i].size;
-		if ( lmb_addrs_overlap(base,size,rgnbase,rgnsize) ) {
-			break;
-		}
-	}
-
-	return (i < rgn->cnt) ? i : -1;
-}
-
-unsigned long __init lmb_alloc(unsigned long size, unsigned long align)
-{
-	return lmb_alloc_base(size, align, LMB_ALLOC_ANYWHERE);
-}
-
-unsigned long __init lmb_alloc_base(unsigned long size, unsigned long align,
-				    unsigned long max_addr)
-{
-	unsigned long alloc;
-
-	alloc = __lmb_alloc_base(size, align, max_addr);
-
-	if (alloc == 0)
-		panic("ERROR: Failed to allocate 0x%lx bytes below 0x%lx.\n",
-				size, max_addr);
-
-	return alloc;
-}
-
-unsigned long __init __lmb_alloc_base(unsigned long size, unsigned long align,
-				    unsigned long max_addr)
-{
-	long i, j;
-	unsigned long base = 0;
-
-	BUG_ON(0 == size);
-
-#ifdef CONFIG_PPC32
-	/* On 32-bit, make sure we allocate lowmem */
-	if (max_addr == LMB_ALLOC_ANYWHERE)
-		max_addr = __max_low_memory;
-#endif
-	for (i = lmb.memory.cnt-1; i >= 0; i--) {
-		unsigned long lmbbase = lmb.memory.region[i].base;
-		unsigned long lmbsize = lmb.memory.region[i].size;
-
-		if (max_addr == LMB_ALLOC_ANYWHERE)
-			base = _ALIGN_DOWN(lmbbase + lmbsize - size, align);
-		else if (lmbbase < max_addr) {
-			base = min(lmbbase + lmbsize, max_addr);
-			base = _ALIGN_DOWN(base - size, align);
-		} else
-			continue;
-
-		while ((lmbbase <= base) &&
-		       ((j = lmb_overlaps_region(&lmb.reserved, base, size)) >= 0) )
-			base = _ALIGN_DOWN(lmb.reserved.region[j].base - size,
-					   align);
-
-		if ((base != 0) && (lmbbase <= base))
-			break;
-	}
-
-	if (i < 0)
-		return 0;
-
-	lmb_add_region(&lmb.reserved, base, size);
-
-	return base;
-}
-
-/* You must call lmb_analyze() before this. */
-unsigned long __init lmb_phys_mem_size(void)
-{
-	return lmb.memory.size;
-}
-
-unsigned long __init lmb_end_of_DRAM(void)
-{
-	int idx = lmb.memory.cnt - 1;
-
-	return (lmb.memory.region[idx].base + lmb.memory.region[idx].size);
-}
-
-/* You must call lmb_analyze() after this. */
-void __init lmb_enforce_memory_limit(unsigned long memory_limit)
-{
-	unsigned long i, limit;
-	struct lmb_property *p;
-
-	if (! memory_limit)
-		return;
-
-	/* Truncate the lmb regions to satisfy the memory limit. */
-	limit = memory_limit;
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		if (limit > lmb.memory.region[i].size) {
-			limit -= lmb.memory.region[i].size;
-			continue;
-		}
-
-		lmb.memory.region[i].size = limit;
-		lmb.memory.cnt = i + 1;
-		break;
-	}
-
-	if (lmb.memory.region[0].size < lmb.rmo_size)
-		lmb.rmo_size = lmb.memory.region[0].size;
-
-	/* And truncate any reserves above the limit also. */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		p = &lmb.reserved.region[i];
-
-		if (p->base > memory_limit)
-			p->size = 0;
-		else if ((p->base + p->size) > memory_limit)
-			p->size = memory_limit - p->base;
-
-		if (p->size == 0) {
-			lmb_remove_region(&lmb.reserved, i);
-			i--;
-		}
-	}
-}
-
-int __init lmb_is_reserved(unsigned long addr)
-{
-	int i;
-
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long upper = lmb.reserved.region[i].base +
-				      lmb.reserved.region[i].size - 1;
-		if ((addr >= lmb.reserved.region[i].base) && (addr <= upper))
-			return 1;
-	}
-	return 0;
-}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index be5c506779a7..16def4dcff6d 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -31,6 +31,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
+#include <linux/lmb.h>
 
 #include <asm/pgalloc.h>
 #include <asm/prom.h>
@@ -42,7 +43,6 @@
 #include <asm/machdep.h>
 #include <asm/btext.h>
 #include <asm/tlb.h>
-#include <asm/lmb.h>
 #include <asm/sections.h>
 #include <asm/vdso.h>
 
@@ -111,7 +111,7 @@ int memory_add_physaddr_to_nid(u64 start)
 }
 #endif
 
-int __devinit arch_add_memory(int nid, u64 start, u64 size)
+int arch_add_memory(int nid, u64 start, u64 size)
 {
 	struct pglist_data *pgdata;
 	struct zone *zone;
@@ -175,7 +175,6 @@ void show_mem(void)
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_online_pgdat(pgdat) {
 		unsigned long flags;
 		pgdat_resize_lock(pgdat, &flags);
@@ -217,9 +216,11 @@ void __init do_init_bootmem(void)
 	unsigned long total_pages;
 	int boot_mapsize;
 
-	max_pfn = total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
 	total_pages = total_lowmem >> PAGE_SHIFT;
+	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
 #endif
 
 	/*
@@ -245,18 +246,18 @@ void __init do_init_bootmem(void)
 	 * present.
 	 */
 #ifdef CONFIG_HIGHMEM
-	free_bootmem_with_active_regions(0, total_lowmem >> PAGE_SHIFT);
+	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
 	/* reserve the sections we're already using */
 	for (i = 0; i < lmb.reserved.cnt; i++) {
 		unsigned long addr = lmb.reserved.region[i].base +
 				     lmb_size_bytes(&lmb.reserved, i) - 1;
-		if (addr < total_lowmem)
+		if (addr < lowmem_end_addr)
 			reserve_bootmem(lmb.reserved.region[i].base,
 					lmb_size_bytes(&lmb.reserved, i),
 					BOOTMEM_DEFAULT);
-		else if (lmb.reserved.region[i].base < total_lowmem) {
-			unsigned long adjusted_size = total_lowmem -
+		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+			unsigned long adjusted_size = lowmem_end_addr -
 				      lmb.reserved.region[i].base;
 			reserve_bootmem(lmb.reserved.region[i].base,
 					adjusted_size, BOOTMEM_DEFAULT);
@@ -326,7 +327,7 @@ void __init paging_init(void)
 	       (top_of_ram - total_ram) >> 20);
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 #ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
 	max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT;
 #else
 	max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT;
@@ -381,7 +382,7 @@ void __init mem_init(void)
 	{
 		unsigned long pfn, highmem_mapnr;
 
-		highmem_mapnr = total_lowmem >> PAGE_SHIFT;
+		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
 			struct page *page = pfn_to_page(pfn);
 			if (lmb_is_reserved(pfn << PAGE_SHIFT))
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index ebfd13dc9d19..04802252a64f 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -48,9 +48,11 @@ extern unsigned int num_tlbcam_entries;
 
 extern unsigned long ioremap_bot;
 extern unsigned long __max_low_memory;
-extern unsigned long __initial_memory_limit;
+extern phys_addr_t __initial_memory_limit_addr;
 extern unsigned long total_memory;
 extern unsigned long total_lowmem;
+extern phys_addr_t memstart_addr;
+extern phys_addr_t lowmem_end_addr;
 
 /* ...and now those things that may be slightly different between processor
  * architectures.  -- Dan
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index a300d254aac6..1efd631211ef 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -17,8 +17,9 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
+#include <linux/lmb.h>
 #include <asm/sparsemem.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/system.h>
 #include <asm/smp.h>
 
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index ac3390f81900..64c44bcc68de 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -281,12 +281,13 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
  */
 void __init mapin_ram(void)
 {
-	unsigned long v, p, s, f;
+	unsigned long v, s, f;
+	phys_addr_t p;
 	int ktext;
 
 	s = mmu_mapin_ram();
 	v = KERNELBASE + s;
-	p = PPC_MEMSTART + s;
+	p = memstart_addr + s;
 	for (; s < total_lowmem; s += PAGE_SIZE) {
 		ktext = ((char *) v >= _stext && (char *) v < etext);
 		f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM;
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index 5c45d474cfcc..cef9f156874b 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -26,11 +26,11 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
 #include <asm/machdep.h>
-#include <asm/lmb.h>
 
 #include "mmu_decl.h"
 
@@ -82,7 +82,6 @@ unsigned long __init mmu_mapin_ram(void)
 #else
 	unsigned long tot, bl, done;
 	unsigned long max_size = (256<<20);
-	unsigned long align;
 
 	if (__map_without_bats) {
 		printk(KERN_DEBUG "RAM mapped without BATs\n");
@@ -93,19 +92,13 @@ unsigned long __init mmu_mapin_ram(void)
 
 	/* Make sure we don't map a block larger than the
 	   smallest alignment of the physical address. */
-	/* alignment of PPC_MEMSTART */
-	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
-	/* set BAT block size to MIN(max_size, align) */
-	if (align && align < max_size)
-		max_size = align;
-
 	tot = total_lowmem;
 	for (bl = 128<<10; bl < max_size; bl <<= 1) {
 		if (bl * 2 > tot)
 			break;
 	}
 
-	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
+	setbat(2, KERNELBASE, 0, bl, _PAGE_RAM);
 	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
 	if ((done < tot) && !bat_addrs[3].limit) {
 		/* use BAT3 to cover a bit more */
@@ -113,7 +106,7 @@ unsigned long __init mmu_mapin_ram(void)
 		for (bl = 128<<10; bl < max_size; bl <<= 1)
 			if (bl * 2 > tot)
 				break;
-		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
+		setbat(3, KERNELBASE+done, done, bl, _PAGE_RAM);
 		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
 	}
 
@@ -240,7 +233,7 @@ void __init MMU_init_hw(void)
 	 */
 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
 	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
-				   __initial_memory_limit));
+				   __initial_memory_limit_addr));
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
 
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 47b06bad24ad..906daeda59a8 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -124,6 +124,12 @@ void slb_flush_and_rebolt(void)
 		ksp_vsid_data = get_slb_shadow()->save_area[2].vsid;
 	}
 
+	/*
+	 * We can't take a PMU exception in the following code, so hard
+	 * disable interrupts.
+	 */
+	hard_irq_disable();
+
 	/* We need to do this all in asm, so we're sure we don't touch
 	 * the stack between the slbia and rebolting it. */
 	asm volatile("isync\n"
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 50448d5de9d2..efbbd13d93e5 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -12,12 +12,14 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/lmb.h>
+
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
 #include <asm/paca.h>
 #include <asm/cputable.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/abs_addr.h>
 #include <asm/firmware.h>
 #include <asm/iseries/hv_call.h>
diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c
index 257b13cb18af..2a9b4a049329 100644
--- a/arch/powerpc/oprofile/cell/spu_task_sync.c
+++ b/arch/powerpc/oprofile/cell/spu_task_sync.c
@@ -68,7 +68,7 @@ static struct cached_info *get_cached_info(struct spu *the_spu, int spu_num)
 	if (spu_num >= num_spu_nodes) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Invalid index %d into spu info cache\n",
-		       __FUNCTION__, __LINE__, spu_num);
+		       __func__, __LINE__, spu_num);
 		ret_info = NULL;
 		goto out;
 	}
@@ -115,7 +115,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId)
 	if (!info) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: create vma_map failed\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		retval = -ENOMEM;
 		goto err_alloc;
 	}
@@ -123,7 +123,7 @@ prepare_cached_spu_info(struct spu *spu, unsigned long objectId)
 	if (!new_map) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: create vma_map failed\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		retval = -ENOMEM;
 		goto err_alloc;
 	}
@@ -171,7 +171,7 @@ static int release_cached_info(int spu_index)
 			printk(KERN_ERR "SPU_PROF: "
 				"%s, line %d: "
 				"Invalid index %d into spu info cache\n",
-				__FUNCTION__, __LINE__, spu_index);
+				__func__, __LINE__, spu_index);
 			goto out;
 		}
 		end = spu_index + 1;
@@ -273,7 +273,7 @@ fail_no_image_cookie:
 
 	printk(KERN_ERR "SPU_PROF: "
 		"%s, line %d: Cannot find dcookie for SPU binary\n",
-		__FUNCTION__, __LINE__);
+		__func__, __LINE__);
 	goto out;
 }
 
@@ -467,7 +467,7 @@ int spu_sync_stop(void)
 	if (ret) {
 		printk(KERN_ERR "SPU_PROF: "
 			"%s, line %d: spu_switch_event_unregister returned %d\n",
-			__FUNCTION__, __LINE__, ret);
+			__func__, __LINE__, ret);
 		goto out;
 	}
 
diff --git a/arch/powerpc/oprofile/cell/vma_map.c b/arch/powerpc/oprofile/cell/vma_map.c
index 76ec1d16aef7..fff66662d021 100644
--- a/arch/powerpc/oprofile/cell/vma_map.c
+++ b/arch/powerpc/oprofile/cell/vma_map.c
@@ -72,7 +72,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
 		kzalloc(sizeof(struct vma_to_fileoffset_map), GFP_KERNEL);
 	if (!new) {
 		printk(KERN_ERR "SPU_PROF: %s, line %d: malloc failed\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		vma_map_free(map);
 		return NULL;
 	}
@@ -92,7 +92,7 @@ vma_map_add(struct vma_to_fileoffset_map *map, unsigned int vma,
  * A pointer to the first vma_map in the generated list
  * of vma_maps is returned.  */
 struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
-					     unsigned long spu_elf_start)
+					     unsigned long __spu_elf_start)
 {
 	static const unsigned char expected[EI_PAD] = {
 		[EI_MAG0] = ELFMAG0,
@@ -107,9 +107,11 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 
 	int grd_val;
 	struct vma_to_fileoffset_map *map = NULL;
+	void __user *spu_elf_start = (void __user *)__spu_elf_start;
 	struct spu_overlay_info ovly;
 	unsigned int overlay_tbl_offset = -1;
-	unsigned long phdr_start, shdr_start;
+	Elf32_Phdr __user *phdr_start;
+	Elf32_Shdr __user *shdr_start;
 	Elf32_Ehdr ehdr;
 	Elf32_Phdr phdr;
 	Elf32_Shdr shdr, shdr_str;
@@ -121,30 +123,30 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 	unsigned int ovly_buf_table_sym = 0;
 	unsigned int ovly_table_end_sym = 0;
 	unsigned int ovly_buf_table_end_sym = 0;
-	unsigned long ovly_table;
+	struct spu_overlay_info __user *ovly_table;
 	unsigned int n_ovlys;
 
 	/* Get and validate ELF header.	 */
 
-	if (copy_from_user(&ehdr, (void *) spu_elf_start, sizeof (ehdr)))
+	if (copy_from_user(&ehdr, spu_elf_start, sizeof (ehdr)))
 		goto fail;
 
 	if (memcmp(ehdr.e_ident, expected, EI_PAD) != 0) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Unexpected e_ident parsing SPU ELF\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		goto fail;
 	}
 	if (ehdr.e_machine != EM_SPU) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Unexpected e_machine parsing SPU ELF\n",
-		       __FUNCTION__,  __LINE__);
+		       __func__,  __LINE__);
 		goto fail;
 	}
 	if (ehdr.e_type != ET_EXEC) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Unexpected e_type parsing SPU ELF\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		goto fail;
 	}
 	phdr_start = spu_elf_start + ehdr.e_phoff;
@@ -152,9 +154,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 
 	/* Traverse program headers.  */
 	for (i = 0; i < ehdr.e_phnum; i++) {
-		if (copy_from_user(&phdr,
-				   (void *) (phdr_start + i * sizeof(phdr)),
-				   sizeof(phdr)))
+		if (copy_from_user(&phdr, phdr_start + i, sizeof(phdr)))
 			goto fail;
 
 		if (phdr.p_type != PT_LOAD)
@@ -171,9 +171,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 	pr_debug("SPU_PROF: Created non-overlay maps\n");
 	/* Traverse section table and search for overlay-related symbols.  */
 	for (i = 0; i < ehdr.e_shnum; i++) {
-		if (copy_from_user(&shdr,
-				   (void *) (shdr_start + i * sizeof(shdr)),
-				   sizeof(shdr)))
+		if (copy_from_user(&shdr, shdr_start + i, sizeof(shdr)))
 			goto fail;
 
 		if (shdr.sh_type != SHT_SYMTAB)
@@ -182,8 +180,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			continue;
 
 		if (copy_from_user(&shdr_str,
-				   (void *) (shdr_start + shdr.sh_link *
-					     sizeof(shdr)),
+				   shdr_start + shdr.sh_link,
 				   sizeof(shdr)))
 			goto fail;
 
@@ -191,15 +188,15 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 			goto fail;;
 
 		for (j = 0; j < shdr.sh_size / sizeof (sym); j++) {
-			if (copy_from_user(&sym, (void *) (spu_elf_start +
-						       shdr.sh_offset + j *
-							   sizeof (sym)),
+			if (copy_from_user(&sym, spu_elf_start +
+						 shdr.sh_offset +
+						 j * sizeof (sym),
 					   sizeof (sym)))
 				goto fail;
 
-			if (copy_from_user(name, (void *)
-					   (spu_elf_start + shdr_str.sh_offset +
-					    sym.st_name),
+			if (copy_from_user(name, 
+					   spu_elf_start + shdr_str.sh_offset +
+					   sym.st_name,
 					   20))
 				goto fail;
 
@@ -235,7 +232,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 	if (overlay_tbl_offset < 0) {
 		printk(KERN_ERR "SPU_PROF: "
 		       "%s, line %d: Error finding SPU overlay table\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		goto fail;
 	}
 	ovly_table = spu_elf_start + overlay_tbl_offset;
@@ -245,9 +242,7 @@ struct vma_to_fileoffset_map *create_vma_map(const struct spu *aSpu,
 
 	/* Traverse overlay table.  */
 	for (i = 0; i < n_ovlys; i++) {
-		if (copy_from_user(&ovly, (void *)
-				   (ovly_table + i * sizeof (ovly)),
-				   sizeof (ovly)))
+		if (copy_from_user(&ovly, ovly_table + i, sizeof (ovly)))
 			goto fail;
 
 		/* The ovly.vma/size/offset arguments are analogous to the same
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 13929771bee7..5ff4de3eb3be 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -216,7 +216,7 @@ static void pm_rtas_reset_signals(u32 node)
 		 * failure to stop OProfile.
 		 */
 		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __FUNCTION__, ret);
+		       __func__, ret);
 }
 
 static int pm_rtas_activate_signals(u32 node, u32 count)
@@ -255,7 +255,7 @@ static int pm_rtas_activate_signals(u32 node, u32 count)
 
 		if (unlikely(ret)) {
 			printk(KERN_WARNING "%s: rtas returned: %d\n",
-			       __FUNCTION__, ret);
+			       __func__, ret);
 			return -EIO;
 		}
 	}
@@ -560,7 +560,7 @@ static int cell_reg_setup(struct op_counter_config *ctr,
 		if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
 			printk(KERN_ERR
 			       "%s: rtas token ibm,cbe-spu-perftools unknown\n",
-			       __FUNCTION__);
+			       __func__);
 			return -EIO;
 		}
 	}
@@ -576,7 +576,7 @@ static int cell_reg_setup(struct op_counter_config *ctr,
 	if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
 		printk(KERN_ERR
 		       "%s: rtas token ibm,cbe-perftools unknown\n",
-		       __FUNCTION__);
+		       __func__);
 		return -EIO;
 	}
 
@@ -853,7 +853,7 @@ static int pm_rtas_activate_spu_profiling(u32 node)
 
 	if (unlikely(ret)) {
 		printk(KERN_WARNING "%s: rtas returned: %d\n",
-		       __FUNCTION__, ret);
+		       __func__, ret);
 		return -EIO;
 	}
 
@@ -949,7 +949,7 @@ static int cell_global_start_spu(struct op_counter_config *ctr)
 		if (unlikely(ret != 0)) {
 			printk(KERN_ERR
 			       "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
-			       __FUNCTION__, ret);
+			       __func__, ret);
 			rtas_error = -EIO;
 			goto out;
 		}
@@ -1061,7 +1061,7 @@ static void cell_global_stop_spu(void)
 		if (unlikely(rtn_value != 0)) {
 			printk(KERN_ERR
 			       "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
-			       __FUNCTION__, rtn_value);
+			       __func__, rtn_value);
 		}
 
 		/* Deactivate the signals */
@@ -1151,7 +1151,7 @@ static void cell_handle_interrupt(struct pt_regs *regs,
 		for (i = 0; i < num_counters; ++i) {
 			if ((interrupt_mask & CBE_PM_CTR_OVERFLOW_INTR(i))
 			    && ctr[i].enabled) {
-				oprofile_add_pc(pc, is_kernel, i);
+				oprofile_add_ext_sample(pc, regs, i, is_kernel);
 				cbe_write_ctr(cpu, i, reset_value[i]);
 			}
 		}
diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c
index 13d1345026da..ae2e7f67c18e 100644
--- a/arch/powerpc/platforms/40x/ep405.c
+++ b/arch/powerpc/platforms/40x/ep405.c
@@ -29,6 +29,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static struct device_node *bcsr_node;
 static void __iomem *bcsr_regs;
@@ -119,5 +120,6 @@ define_machine(ep405) {
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
index f9206a7fede0..1dd24ffc0dc1 100644
--- a/arch/powerpc/platforms/40x/kilauea.c
+++ b/arch/powerpc/platforms/40x/kilauea.c
@@ -1,7 +1,7 @@
 /*
  * Kilauea board specific routines
  *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ * Copyright 2007-2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
  *
  * Based on the Walnut code by
  * Josh Boyer <jwboyer@linux.vnet.ibm.com>
@@ -20,6 +20,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id kilauea_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@ define_machine(kilauea) {
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c
index 4e4df72fc9cd..a6a1d6017b71 100644
--- a/arch/powerpc/platforms/40x/makalu.c
+++ b/arch/powerpc/platforms/40x/makalu.c
@@ -20,6 +20,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id makalu_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -54,5 +55,6 @@ define_machine(makalu) {
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c
index 0422590040db..fc7fb001276c 100644
--- a/arch/powerpc/platforms/40x/virtex.c
+++ b/arch/powerpc/platforms/40x/virtex.c
@@ -14,6 +14,7 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 #include <asm/xilinx_intc.h>
+#include <asm/ppc4xx.h>
 
 static struct of_device_id xilinx_of_bus_ids[] __initdata = {
 	{ .compatible = "xlnx,plb-v46-1.00.a", },
@@ -48,5 +49,6 @@ define_machine(virtex) {
 	.probe			= virtex_probe,
 	.init_IRQ		= xilinx_intc_init_tree,
 	.get_irq		= xilinx_intc_get_irq,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c
index b8b257efeb77..335df91fbee5 100644
--- a/arch/powerpc/platforms/40x/walnut.c
+++ b/arch/powerpc/platforms/40x/walnut.c
@@ -26,6 +26,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id walnut_of_bus[] = {
 	{ .compatible = "ibm,plb3", },
@@ -61,5 +62,6 @@ define_machine(walnut) {
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
-	.calibrate_decr	= generic_calibrate_decr,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/44x.h b/arch/powerpc/platforms/44x/44x.h
index 42eabf87fea3..dbc4d2b4301a 100644
--- a/arch/powerpc/platforms/44x/44x.h
+++ b/arch/powerpc/platforms/44x/44x.h
@@ -3,6 +3,5 @@
 
 extern u8 as1_readb(volatile u8 __iomem  *addr);
 extern void as1_writeb(u8 data, volatile u8 __iomem *addr);
-extern void ppc44x_reset_system(char *cmd);
 
 #endif /* __POWERPC_PLATFORMS_44X_44X_H */
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 1bfb2191010a..6abe91357eee 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -67,6 +67,25 @@ config WARP
 	  See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
 	  Telephony Developers" link for more information.
 
+config CANYONLANDS
+	bool "Canyonlands"
+	depends on 44x
+	default n
+	select 460EX
+	select PCI
+	select PPC4xx_PCI_EXPRESS
+	help
+	  This option enables support for the AMCC PPC460EX evaluation board.
+
+config YOSEMITE
+	bool "Yosemite"
+	depends on 44x
+	default n
+	select 440EP
+	select PCI
+	help
+	  This option enables support for the AMCC PPC440EP evaluation board.
+
 #config LUAN
 #	bool "Luan"
 #	depends on 44x
@@ -122,6 +141,14 @@ config 440SPe
 	bool
 	select IBM_NEW_EMAC_EMAC4
 
+config 460EX
+	bool
+	select PPC_FPU
+	select IBM_NEW_EMAC_EMAC4
+	select IBM_NEW_EMAC_RGMII
+	select IBM_NEW_EMAC_ZMII
+	select IBM_NEW_EMAC_TAH
+
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 0864d4f1cbc2..774165f9acdd 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -1,9 +1,11 @@
-obj-$(CONFIG_44x)	:= misc_44x.o
+obj-$(CONFIG_44x)	:= misc_44x.o idle.o
 obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_TAISHAN)	+= taishan.o
 obj-$(CONFIG_BAMBOO)	+= bamboo.o
+obj-$(CONFIG_YOSEMITE)	+= bamboo.o
 obj-$(CONFIG_SEQUOIA)	+= sequoia.o
 obj-$(CONFIG_KATMAI)	+= katmai.o
 obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
+obj-$(CONFIG_CANYONLANDS) += canyonlands.o
diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c
index fb9a22a7e8d0..cef169e95156 100644
--- a/arch/powerpc/platforms/44x/bamboo.c
+++ b/arch/powerpc/platforms/44x/bamboo.c
@@ -22,8 +22,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id bamboo_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -53,11 +52,11 @@ static int __init bamboo_probe(void)
 }
 
 define_machine(bamboo) {
-	.name 				= "Bamboo",
-	.probe 				= bamboo_probe,
-	.progress 			= udbg_progress,
-	.init_IRQ 			= uic_init_tree,
-	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.name 			= "Bamboo",
+	.probe 			= bamboo_probe,
+	.progress 		= udbg_progress,
+	.init_IRQ 		= uic_init_tree,
+	.get_irq 		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr 	= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/canyonlands.c b/arch/powerpc/platforms/44x/canyonlands.c
new file mode 100644
index 000000000000..3949289f51df
--- /dev/null
+++ b/arch/powerpc/platforms/44x/canyonlands.c
@@ -0,0 +1,63 @@
+/*
+ * Canyonlands board specific routines
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * Based on the Katmai code by
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * Copyright 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+
+static __initdata struct of_device_id canyonlands_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init canyonlands_device_probe(void)
+{
+	of_platform_bus_probe(NULL, canyonlands_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(canyonlands, canyonlands_device_probe);
+
+static int __init canyonlands_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "amcc,canyonlands"))
+		return 0;
+
+	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+	return 1;
+}
+
+define_machine(canyonlands) {
+	.name 				= "Canyonlands",
+	.probe 				= canyonlands_probe,
+	.progress 			= udbg_progress,
+	.init_IRQ 			= uic_init_tree,
+	.get_irq 			= uic_get_irq,
+	.restart			= ppc4xx_reset_system,
+	.calibrate_decr			= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c
index 1a8d467bff85..a0e8fe4662f6 100644
--- a/arch/powerpc/platforms/44x/ebony.c
+++ b/arch/powerpc/platforms/44x/ebony.c
@@ -26,8 +26,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id ebony_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -66,6 +65,6 @@ define_machine(ebony) {
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
-	.restart		= ppc44x_reset_system,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/idle.c b/arch/powerpc/platforms/44x/idle.c
new file mode 100644
index 000000000000..7a81f921fef9
--- /dev/null
+++ b/arch/powerpc/platforms/44x/idle.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2008 IBM Corp. 
+ *
+ * Based on arch/powerpc/platforms/pasemi/idle.c: 
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Added by: Jerone Young <jyoung5@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ */
+
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <asm/machdep.h>
+
+static int mode_spin;
+
+static void ppc44x_idle(void)
+{
+	unsigned long msr_save;
+
+	msr_save = mfmsr();
+	/* set wait state MSR */
+	mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE);
+	isync();
+	/* return to initial state */
+	mtmsr(msr_save);
+	isync();
+}
+
+int __init ppc44x_idle_init(void)
+{
+	if (!mode_spin) {
+		/* If we are not setting spin mode 
+                   then we set to wait mode */
+		ppc_md.power_save = &ppc44x_idle;
+	}
+
+	return 0;
+}
+
+arch_initcall(ppc44x_idle_init);
+
+static int __init idle_param(char *p)
+{ 
+
+	if (!strcmp("spin", p)) {
+		mode_spin = 1;
+		ppc_md.power_save = NULL;
+	}
+
+	return 0;
+}
+
+early_param("idle", idle_param);
diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c
index 11134121f272..44f4b3a00ced 100644
--- a/arch/powerpc/platforms/44x/katmai.c
+++ b/arch/powerpc/platforms/44x/katmai.c
@@ -22,8 +22,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id katmai_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -58,6 +57,6 @@ define_machine(katmai) {
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/misc_44x.S b/arch/powerpc/platforms/44x/misc_44x.S
index 3bce71d5d756..dc12b8009e48 100644
--- a/arch/powerpc/platforms/44x/misc_44x.S
+++ b/arch/powerpc/platforms/44x/misc_44x.S
@@ -44,14 +44,3 @@ _GLOBAL(as1_writeb)
 	sync
 	isync
 	blr
-
-/*
- * void ppc44x_reset_system(char *cmd)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(ppc44x_reset_system)
-	mfspr	r13,SPRN_DBCR0
-	oris	r13,r13,DBCR0_RST_SYSTEM@h
-	mtspr	SPRN_DBCR0,r13
-	b	.			/* Just in case the reset doesn't work */
diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c
index a7fae1cf69c1..4f1ff84c4b63 100644
--- a/arch/powerpc/platforms/44x/rainier.c
+++ b/arch/powerpc/platforms/44x/rainier.c
@@ -22,7 +22,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id rainier_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -57,6 +57,6 @@ define_machine(rainier) {
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c
index d279db42c896..49eb73daacdf 100644
--- a/arch/powerpc/platforms/44x/sequoia.c
+++ b/arch/powerpc/platforms/44x/sequoia.c
@@ -23,7 +23,7 @@
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
 
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id sequoia_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -58,6 +58,6 @@ define_machine(sequoia) {
 	.progress 			= udbg_progress,
 	.init_IRQ 			= uic_init_tree,
 	.get_irq 			= uic_get_irq,
-	.restart			= ppc44x_reset_system,
+	.restart			= ppc4xx_reset_system,
 	.calibrate_decr			= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c
index 28ab7e2e02c3..49c78b2098b4 100644
--- a/arch/powerpc/platforms/44x/taishan.c
+++ b/arch/powerpc/platforms/44x/taishan.c
@@ -29,8 +29,7 @@
 #include <asm/time.h>
 #include <asm/uic.h>
 #include <asm/pci-bridge.h>
-
-#include "44x.h"
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id taishan_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -68,6 +67,6 @@ define_machine(taishan) {
 	.progress		= udbg_progress,
 	.init_IRQ		= uic_init_tree,
 	.get_irq		= uic_get_irq,
-	.restart		= ppc44x_reset_system,
+	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 84ab78ff8c03..9150318cfc56 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,6 +11,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/ndfc.h>
+#include <asm/machdep.h>
 
 #ifdef CONFIG_MTD_NAND_NDFC
 
@@ -100,6 +101,6 @@ static int warp_setup_nand_flash(void)
 
 	return 0;
 }
-device_initcall(warp_setup_nand_flash);
+machine_device_initcall(warp, warp_setup_nand_flash);
 
 #endif
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index da5b7b7599db..39cf6150a72b 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -18,9 +18,7 @@
 #include <asm/udbg.h>
 #include <asm/time.h>
 #include <asm/uic.h>
-
-#include "44x.h"
-
+#include <asm/ppc4xx.h>
 
 static __initdata struct of_device_id warp_of_bus[] = {
 	{ .compatible = "ibm,plb4", },
@@ -49,7 +47,7 @@ define_machine(warp) {
 	.progress 	= udbg_progress,
 	.init_IRQ 	= uic_init_tree,
 	.get_irq 	= uic_get_irq,
-	.restart	= ppc44x_reset_system,
+	.restart	= ppc4xx_reset_system,
 	.calibrate_decr = generic_calibrate_decr,
 };
 
diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c
index 956f459e175c..6d584f4e3c9a 100644
--- a/arch/powerpc/platforms/52xx/lite5200.c
+++ b/arch/powerpc/platforms/52xx/lite5200.c
@@ -63,7 +63,7 @@ lite5200_fix_clock_config(void)
 	of_node_put(np);
 	if (!cdm) {
 		printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
-		       __FUNCTION__);
+		       __func__);
 		return;
 	}
 
@@ -98,7 +98,7 @@ lite5200_fix_port_config(void)
 	of_node_put(np);
 	if (!gpio) {
 		printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
-		       __FUNCTION__);
+		       __func__);
 		return;
 	}
 
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c
index 9aa4425d80b2..4d5fd1dbd400 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_common.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c
@@ -199,6 +199,7 @@ int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
 
 	return 0;
 }
+EXPORT_SYMBOL(mpc52xx_set_psc_clkdiv);
 
 /**
  * mpc52xx_restart: ppc_md->restart hook for mpc5200 using the watchdog timer
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 4fad6c7bf9f1..917ac8891555 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -11,7 +11,6 @@ config MPC8272_ADS
 	select 8260
 	select FSL_SOC
 	select PQ2_ADS_PCI_PIC if PCI
-	select PPC_CPM_NEW_BINDING
 	help
 	  This option enables support for the MPC8272 ADS board
 
@@ -22,7 +21,6 @@ config PQ2FADS
 	select 8260
 	select FSL_SOC
 	select PQ2_ADS_PCI_PIC if PCI
-	select PPC_CPM_NEW_BINDING
 	help
 	  This option enables support for the PQ2FADS board
 
@@ -31,7 +29,6 @@ config EP8248E
 	select 8272
 	select 8260
 	select FSL_SOC
-	select PPC_CPM_NEW_BINDING
 	select MDIO_BITBANG
 	help
 	  This enables support for the Embedded Planet EP8248E board.
diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c
index ba93d8ae9b0c..d5770fdf7f09 100644
--- a/arch/powerpc/platforms/82xx/ep8248e.c
+++ b/arch/powerpc/platforms/82xx/ep8248e.c
@@ -138,7 +138,7 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev,
 
 	bus->name = "ep8248e-mdio-bitbang";
 	bus->dev = &ofdev->dev;
-	bus->id = res.start;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start);
 
 	return mdiobus_register(bus);
 }
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 8a9c26973605..64d17b0d6455 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -39,12 +39,9 @@ static int mpc837xmds_usb_cfg(void)
 	if (ret)
 		return ret;
 	/* Map BCSR area */
-	np = of_find_node_by_name(NULL, "bcsr");
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
 	if (np) {
-		struct resource res;
-
-		of_address_to_resource(np, 0, &res);
-		bcsr_regs = ioremap(res.start, res.end - res.start + 1);
+		bcsr_regs = of_iomap(np, 0);
 		of_node_put(np);
 	}
 	if (!bcsr_regs)
@@ -96,6 +93,7 @@ static void __init mpc837x_mds_setup_arch(void)
 static struct of_device_id mpc837x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index 2293ae51383d..c00356bdb1dd 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -46,6 +46,7 @@ static void __init mpc837x_rdb_setup_arch(void)
 static struct of_device_id mpc837x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 68065e62fc3d..88a3b5cabb18 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -16,6 +16,7 @@
 #define MPC83XX_SCCR_USB_DRCM_10   0x00200000
 #define MPC8315_SCCR_USB_MASK      0x00c00000
 #define MPC8315_SCCR_USB_DRCM_11   0x00c00000
+#define MPC8315_SCCR_USB_DRCM_01   0x00400000
 #define MPC837X_SCCR_USB_DRCM_11   0x00c00000
 
 /* system i/o configuration register low */
@@ -37,6 +38,7 @@
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
 #define CONTROL_UTMI_PHY_EN        0x00000200
+#define CONTROL_REFSEL_24MHZ       0x00000040
 #define CONTROL_REFSEL_48MHZ       0x00000080
 #define CONTROL_PHY_CLK_SEL_ULPI   0x00000400
 #define CONTROL_OTG_PORT           0x00000020
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 471fdd8f4108..64bcf0a33c71 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -129,7 +129,7 @@ int mpc831x_usb_cfg(void)
 	if (immr_node && of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
 		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
 		                MPC8315_SCCR_USB_MASK,
-		                MPC8315_SCCR_USB_DRCM_11);
+		                MPC8315_SCCR_USB_DRCM_01);
 	else
 		clrsetbits_be32(immap + MPC83XX_SCCR_OFFS,
 		                MPC83XX_SCCR_USB_MASK,
@@ -164,9 +164,15 @@ int mpc831x_usb_cfg(void)
 	/* Using on-chip PHY */
 	if (prop && (!strcmp(prop, "utmi_wide") ||
 		     !strcmp(prop, "utmi"))) {
-		/* Set UTMI_PHY_EN, REFSEL to 48MHZ */
+		u32 refsel;
+
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr"))
+			refsel = CONTROL_REFSEL_24MHZ;
+		else
+			refsel = CONTROL_REFSEL_48MHZ;
+		/* Set UTMI_PHY_EN and REFSEL */
 		out_be32(usb_regs + FSL_USB2_CONTROL_OFFS,
-				CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ);
+				CONTROL_UTMI_PHY_EN | refsel);
 	/* Using external UPLI PHY */
 	} else if (prop && !strcmp(prop, "ulpi")) {
 		/* Set PHY_CLK_SEL to ULPI */
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 7e76ddbd5821..7ff29d53dc2d 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -19,7 +19,6 @@ config MPC8540_ADS
 config MPC8560_ADS
 	bool "Freescale MPC8560 ADS"
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select CPM2
 	help
 	  This option enables support for the MPC 8560 ADS board
@@ -46,6 +45,12 @@ config MPC85xx_DS
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
+config KSI8560
+        bool "Emerson KSI8560"
+        select DEFAULT_UIMAGE
+        help
+          This option enables support for the Emerson KSI8560 board
+
 config STX_GP3
 	bool "Silicon Turnkey Express GP3"
 	help
@@ -53,14 +58,12 @@ config STX_GP3
 	  board.
 	select CPM2
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 
 config TQM8540
 	bool "TQ Components TQM8540"
 	help
 	  This option enables support for the TQ Components TQM8540 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 
 config TQM8541
@@ -68,7 +71,6 @@ config TQM8541
 	help
 	  This option enables support for the TQ Components TQM8541 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 	select CPM2
 
@@ -77,7 +79,6 @@ config TQM8555
 	help
 	  This option enables support for the TQ Components TQM8555 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 	select CPM2
 
@@ -86,7 +87,6 @@ config TQM8560
 	help
 	  This option enables support for the TQ Components TQM8560 board.
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING
 	select TQM85xx
 	select CPM2
 
@@ -99,7 +99,6 @@ config SBC8548
 config SBC8560
 	bool "Wind River SBC8560"
 	select DEFAULT_UIMAGE
-	select PPC_CPM_NEW_BINDING if CPM2
 	help
 	  This option enables support for the Wind River SBC8560 board
 
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index cb7af4ebd75f..6cea185f62b2 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
+obj-$(CONFIG_KSI8560)	  += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
new file mode 100644
index 000000000000..2145adeb220c
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -0,0 +1,257 @@
+/*
+ * Board setup routines for the Emerson KSI8560
+ *
+ * Author: Alexandr Smirnov <asmirnov@ru.mvista.com>
+ *
+ * Based on mpc85xx_ads.c maintained by Kumar Gala
+ *
+ * 2008 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+#include <asm/prom.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include <asm/cpm2.h>
+#include <sysdev/cpm2_pic.h>
+
+
+#define KSI8560_CPLD_HVR		0x04 /* Hardware Version Register */
+#define KSI8560_CPLD_PVR		0x08 /* PLD Version Register */
+#define KSI8560_CPLD_RCR1		0x30 /* Reset Command Register 1 */
+
+#define KSI8560_CPLD_RCR1_CPUHR		0x80 /* CPU Hard Reset */
+
+static void __iomem *cpld_base = NULL;
+
+static void machine_restart(char *cmd)
+{
+	if (cpld_base)
+		out_8(cpld_base + KSI8560_CPLD_RCR1, KSI8560_CPLD_RCR1_CPUHR);
+	else
+		printk(KERN_ERR "Can't find CPLD base, hang forever\n");
+
+	for (;;);
+}
+
+static void cpm2_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	int cascade_irq;
+
+	while ((cascade_irq = cpm2_get_irq()) >= 0)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static void __init ksi8560_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+#ifdef CONFIG_CPM2
+	int irq;
+#endif
+
+	np = of_find_node_by_type(NULL, "open-pic");
+
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Could not map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_CPM2
+	/* Setup CPM2 PIC */
+	np = of_find_compatible_node(NULL, NULL, "fsl,cpm2-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
+		return;
+	}
+	irq = irq_of_parse_and_map(np, 0);
+
+	cpm2_pic_init(np);
+	of_node_put(np);
+	set_irq_chained_handler(irq, cpm2_cascade);
+
+	setup_irq(0, NULL);
+#endif
+}
+
+#ifdef CONFIG_CPM2
+/*
+ * Setup I/O ports
+ */
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin __initdata ksi8560_pins[] = {
+	/* SCC1 */
+	{3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* SCC2 */
+	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* FCC1 */
+	{0, 14, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 15, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{0, 18, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 19, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 20, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 21, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
+	{0, 26, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 28, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{0, 30, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{0, 31, CPM_PIN_INPUT | CPM_PIN_SECONDARY},
+	{2, 23, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK9 */
+	{2, 22, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK10 */
+
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ksi8560_pins); i++) {
+		struct cpm_pin *pin = &ksi8560_pins[i];
+		cpm2_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK9, CPM_CLK_RX);
+	cpm2_clk_setup(CPM_CLK_FCC1, CPM_CLK10, CPM_CLK_TX);
+}
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init ksi8560_setup_arch(void)
+{
+	struct device_node *cpld;
+
+	cpld = of_find_compatible_node(NULL, NULL, "emerson,KSI8560-cpld");
+	if (cpld)
+		cpld_base = of_iomap(cpld, 0);
+	else
+		printk(KERN_ERR "Can't find CPLD in device tree\n");
+
+	if (ppc_md.progress)
+		ppc_md.progress("ksi8560_setup_arch()", 0);
+
+#ifdef CONFIG_CPM2
+	cpm2_reset();
+	init_ioports();
+#endif
+}
+
+static void ksi8560_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+	uint memsize = total_memory;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Emerson Network Power\n");
+	seq_printf(m, "Board\t\t: KSI8560\n");
+
+	if (cpld_base) {
+		seq_printf(m, "Hardware rev\t: %d\n",
+					in_8(cpld_base + KSI8560_CPLD_HVR));
+		seq_printf(m, "CPLD rev\t: %d\n",
+					in_8(cpld_base + KSI8560_CPLD_PVR));
+	} else
+		seq_printf(m, "Unknown Hardware and CPLD revs\n");
+
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+	/* Display the amount of memory */
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(ksi8560, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init ksi8560_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "emerson,KSI8560");
+}
+
+define_machine(ksi8560) {
+	.name			= "KSI8560",
+	.probe			= ksi8560_probe,
+	.setup_arch		= ksi8560_setup_arch,
+	.init_IRQ		= ksi8560_pic_init,
+	.show_cpuinfo		= ksi8560_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= machine_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 4e0305096114..3582c841844b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -165,7 +165,7 @@ static void __init init_ioports(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(mpc8560_ads_pins); i++) {
-		struct cpm_pin *pin = &mpc8560_ads_pins[i];
+		const struct cpm_pin *pin = &mpc8560_ads_pins[i];
 		cpm2_set_pin(pin->port, pin->pin, pin->flags);
 	}
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index bdb3d0b38cd2..dfd8b4ad9b28 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -19,6 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -36,7 +37,7 @@
 #undef DEBUG
 
 #ifdef DEBUG
-#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define DBG(fmt, args...)
 #endif
@@ -183,6 +184,18 @@ static int __init mpc8544_ds_probe(void)
 	}
 }
 
+static struct of_device_id mpc85xxds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{},
+};
+
+static int __init mpc85xxds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
+}
+machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+
 /*
  * Called very early, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 21d113536b86..7442c58d44f5 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -11,6 +11,12 @@ config MPC8641_HPCN
 	help
 	  This option enables support for the MPC8641 HPCN board.
 
+config SBC8641D
+	bool "Wind River SBC8641D"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the WRS SBC8641D board.
+
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
@@ -24,7 +30,7 @@ config MPC8641
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
-	default y if MPC8641_HPCN
+	default y if MPC8641_HPCN || SBC8641D
 
 config MPC8610
 	bool
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index c96706327eaa..1b9b4a9b2525 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -4,4 +4,5 @@
 
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
+obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
 obj-$(CONFIG_MPC8610_HPCD)	+= mpc8610_hpcd.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 0b07485641fe..18b8ebe930d5 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -52,7 +52,7 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-void __init
+static void __init
 mpc86xx_hpcd_init_irq(void)
 {
 	struct mpic *mpic1;
@@ -200,7 +200,7 @@ static int __init mpc86xx_hpcd_probe(void)
 	return 0;
 }
 
-long __init
+static long __init
 mpc86xx_time_init(void)
 {
 	unsigned int temp;
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index cfbe8c52e263..f947f555fd46 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -55,7 +55,7 @@ static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
 }
 #endif	/* CONFIG_PCI */
 
-void __init
+static void __init
 mpc86xx_hpcn_init_irq(void)
 {
 	struct mpic *mpic1;
@@ -162,7 +162,7 @@ mpc86xx_hpcn_setup_arch(void)
 }
 
 
-void
+static void
 mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
 {
 	struct device_node *root;
@@ -190,13 +190,19 @@ static int __init mpc86xx_hpcn_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if (of_flat_dt_is_compatible(root, "mpc86xx"))
+	if (of_flat_dt_is_compatible(root, "fsl,mpc8641hpcn"))
 		return 1;	/* Looks good */
 
+	/* Be nice and don't give silent boot death.  Delete this in 2.6.27 */
+	if (of_flat_dt_is_compatible(root, "mpc86xx")) {
+		pr_warning("WARNING: your dts/dtb is old. You must update before the next kernel release\n");
+		return 1;
+	}
+
 	return 0;
 }
 
-long __init
+static long __init
 mpc86xx_time_init(void)
 {
 	unsigned int temp;
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
new file mode 100644
index 000000000000..510a06ef0b55
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -0,0 +1,164 @@
+/*
+ * SBC8641D board specific routines
+ *
+ * Copyright 2008 Wind River Systems Inc.
+ *
+ * By Paul Gortmaker (see MAINTAINERS for contact information)
+ *
+ * Based largely on the 8641 HPCN support by Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+static void __init
+sbc8641_init_irq(void)
+{
+	struct mpic *mpic1;
+	struct device_node *np;
+	struct resource res;
+
+	/* Determine PIC address. */
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+	of_address_to_resource(np, 0, &res);
+
+	/* Alloc mpic structure and per isu has 16 INT entries. */
+	mpic1 = mpic_alloc(np, res.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " MPIC     ");
+	of_node_put(np);
+	BUG_ON(mpic1 == NULL);
+
+	mpic_init(mpic1);
+}
+
+static void __init
+sbc8641_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("sbc8641_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie")
+		fsl_add_bridge(np, 0);
+#endif
+
+	printk("SBC8641 board from Wind River\n");
+
+#ifdef CONFIG_SMP
+	mpc86xx_smp_init();
+#endif
+}
+
+
+static void
+sbc8641_show_cpuinfo(struct seq_file *m)
+{
+	struct device_node *root;
+	uint memsize = total_memory;
+	const char *model = "";
+	uint svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "Vendor\t\t: Wind River Systems\n");
+
+	root = of_find_node_by_path("/");
+	if (root)
+		model = of_get_property(root, "model", NULL);
+	seq_printf(m, "Machine\t\t: %s\n", model);
+	of_node_put(root);
+
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init sbc8641_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "wind,sbc8641"))
+		return 1;	/* Looks good */
+
+	return 0;
+}
+
+static long __init
+mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+static __initdata struct of_device_id of_bus_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(sbc8641, declare_of_platform_devices);
+
+define_machine(sbc8641) {
+	.name			= "SBC8641D",
+	.probe			= sbc8641_probe,
+	.setup_arch		= sbc8641_setup_arch,
+	.init_IRQ		= sbc8641_init_irq,
+	.show_cpuinfo		= sbc8641_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 7fd224ca233d..6fc849e51e48 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -18,7 +18,6 @@ config MPC8XXFADS
 config MPC86XADS
 	bool "MPC86XADS"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	help
 	  MPC86x Application Development System by Freescale Semiconductor.
 	  The MPC86xADS is meant to serve as a platform for s/w and h/w
@@ -27,7 +26,6 @@ config MPC86XADS
 config MPC885ADS
 	bool "MPC885ADS"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	help
 	  Freescale Semiconductor MPC885 Application Development System (ADS).
 	  Also known as DUET.
@@ -37,7 +35,6 @@ config MPC885ADS
 config PPC_EP88XC
 	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	help
 	  This enables support for the Embedded Planet EP88xC board.
 
@@ -47,7 +44,6 @@ config PPC_EP88XC
 config PPC_ADDER875
 	bool "Analogue & Micro Adder 875"
 	select CPM1
-	select PPC_CPM_NEW_BINDING
 	select REDBOOT
 	help
 	  This enables support for the Analogue & Micro Adder 875
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
index 184f998d1be2..0d9f75c74f8c 100644
--- a/arch/powerpc/platforms/8xx/m8xx_setup.c
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -111,17 +111,12 @@ void __init mpc8xx_calibrate_decr(void)
 
 	/* Processor frequency is MHz.
 	 */
-	ppc_tb_freq = 50000000;
-	if (!get_freq("bus-frequency", &ppc_tb_freq)) {
-		printk(KERN_ERR "WARNING: Estimating decrementer frequency "
-		                "(not found)\n");
-	}
-	ppc_tb_freq /= 16;
 	ppc_proc_freq = 50000000;
 	if (!get_freq("clock-frequency", &ppc_proc_freq))
 		printk(KERN_ERR "WARNING: Estimating processor frequency "
 		                "(not found)\n");
 
+	ppc_tb_freq = ppc_proc_freq / 16;
 	printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
 
 	/* Perform some more timer/timebase initialization.  This used
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 0afd22595546..f38c50b4ce56 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -22,7 +22,6 @@ config PPC_83xx
 	select FSL_SOC
 	select MPC83xx
 	select IPIC
-	select FSL_EMB_PERFMON
 
 config PPC_86xx
 	bool "Freescale 86xx"
@@ -291,13 +290,7 @@ config CPM2
 config PPC_CPM_NEW_BINDING
 	bool
 	depends on CPM1 || CPM2
-	help
-	  Select this if your board has been converted to use the new
-	  device tree bindings for CPM, and no longer needs the
-	  ioport callbacks or the platform device glue code.
-
-	  The fs_enet and cpm_uart drivers will be built as
-	  of_platform devices.
+	default y
 
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 73d81ce14b67..5fc7fac10e93 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -41,11 +41,13 @@ config 40x
 	bool "AMCC 40x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
+	select 4xx_SOC
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
+	select 4xx_SOC
 
 config E200
 	bool "Freescale e200"
@@ -113,7 +115,12 @@ config FSL_BOOKE
 	default y
 
 config FSL_EMB_PERFMON
-	bool
+	bool "Freescale Embedded Perfmon"
+	depends on E500 || PPC_83xx
+	help
+	  This is the Performance Monitor support found on the e500 core
+	  and some e300 cores (c3 and c4).  Select this only if your
+	  core supports the Embedded Performance Monitor APU
 
 config PTE_64BIT
 	bool
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index edab631a8dcb..45646b2b4af4 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -28,13 +28,13 @@
 #include <linux/notifier.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
 #include <asm/machdep.h>
 #include <asm/pci-bridge.h>
 #include <asm/udbg.h>
-#include <asm/lmb.h>
 #include <asm/firmware.h>
 #include <asm/cell-regs.h>
 
@@ -113,7 +113,7 @@
 
 /* IOMMU sizing */
 #define IO_SEGMENT_SHIFT	28
-#define IO_PAGENO_BITS		(IO_SEGMENT_SHIFT - IOMMU_PAGE_SHIFT)
+#define IO_PAGENO_BITS(shift)	(IO_SEGMENT_SHIFT - (shift))
 
 /* The high bit needs to be set on every DMA address */
 #define SPIDER_DMA_OFFSET	0x80000000ul
@@ -123,7 +123,6 @@ struct iommu_window {
 	struct cbe_iommu *iommu;
 	unsigned long offset;
 	unsigned long size;
-	unsigned long pte_offset;
 	unsigned int ioid;
 	struct iommu_table table;
 };
@@ -200,7 +199,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 		(window->ioid & IOPTE_IOID_Mask);
 #endif
 
-	io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
 	for (i = 0; i < npages; i++, uaddr += IOMMU_PAGE_SIZE)
 		io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
@@ -232,7 +231,7 @@ static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
 		| (window->ioid & IOPTE_IOID_Mask);
 #endif
 
-	io_pte = (unsigned long *)tbl->it_base + (index - window->pte_offset);
+	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
 	for (i = 0; i < npages; i++)
 		io_pte[i] = pte;
@@ -307,76 +306,84 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base)
 	return -ENODEV;
 }
 
-static void cell_iommu_setup_page_tables(struct cbe_iommu *iommu,
+static void cell_iommu_setup_stab(struct cbe_iommu *iommu,
 				unsigned long dbase, unsigned long dsize,
 				unsigned long fbase, unsigned long fsize)
 {
 	struct page *page;
-	int i;
-	unsigned long reg, segments, pages_per_segment, ptab_size, stab_size,
-		      n_pte_pages, base;
-
-	base = dbase;
-	if (fsize != 0)
-		base = min(fbase, dbase);
+	unsigned long segments, stab_size;
 
 	segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT;
-	pages_per_segment = 1ull << IO_PAGENO_BITS;
 
-	pr_debug("%s: iommu[%d]: segments: %lu, pages per segment: %lu\n",
-			__FUNCTION__, iommu->nid, segments, pages_per_segment);
+	pr_debug("%s: iommu[%d]: segments: %lu\n",
+			__func__, iommu->nid, segments);
 
 	/* set up the segment table */
 	stab_size = segments * sizeof(unsigned long);
 	page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size));
 	BUG_ON(!page);
 	iommu->stab = page_address(page);
-	clear_page(iommu->stab);
+	memset(iommu->stab, 0, stab_size);
+}
+
+static unsigned long *cell_iommu_alloc_ptab(struct cbe_iommu *iommu,
+		unsigned long base, unsigned long size, unsigned long gap_base,
+		unsigned long gap_size, unsigned long page_shift)
+{
+	struct page *page;
+	int i;
+	unsigned long reg, segments, pages_per_segment, ptab_size,
+		      n_pte_pages, start_seg, *ptab;
+
+	start_seg = base >> IO_SEGMENT_SHIFT;
+	segments  = size >> IO_SEGMENT_SHIFT;
+	pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift);
+	/* PTEs for each segment must start on a 4K bounday */
+	pages_per_segment = max(pages_per_segment,
+				(1 << 12) / sizeof(unsigned long));
 
-	/* ... and the page tables. Since these are contiguous, we can treat
-	 * the page tables as one array of ptes, like pSeries does.
-	 */
 	ptab_size = segments * pages_per_segment * sizeof(unsigned long);
-	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __FUNCTION__,
+	pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__,
 			iommu->nid, ptab_size, get_order(ptab_size));
 	page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size));
 	BUG_ON(!page);
 
-	iommu->ptab = page_address(page);
-	memset(iommu->ptab, 0, ptab_size);
-
-	/* allocate a bogus page for the end of each mapping */
-	page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
-	BUG_ON(!page);
-	iommu->pad_page = page_address(page);
-	clear_page(iommu->pad_page);
+	ptab = page_address(page);
+	memset(ptab, 0, ptab_size);
 
-	/* number of pages needed for a page table */
-	n_pte_pages = (pages_per_segment *
-		       sizeof(unsigned long)) >> IOMMU_PAGE_SHIFT;
+	/* number of 4K pages needed for a page table */
+	n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12;
 
 	pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n",
-			__FUNCTION__, iommu->nid, iommu->stab, iommu->ptab,
+			__func__, iommu->nid, iommu->stab, ptab,
 			n_pte_pages);
 
 	/* initialise the STEs */
 	reg = IOSTE_V | ((n_pte_pages - 1) << 5);
 
-	if (IOMMU_PAGE_SIZE == 0x1000)
-		reg |= IOSTE_PS_4K;
-	else if (IOMMU_PAGE_SIZE == 0x10000)
-		reg |= IOSTE_PS_64K;
-	else {
-		extern void __unknown_page_size_error(void);
-		__unknown_page_size_error();
+	switch (page_shift) {
+	case 12: reg |= IOSTE_PS_4K;  break;
+	case 16: reg |= IOSTE_PS_64K; break;
+	case 20: reg |= IOSTE_PS_1M;  break;
+	case 24: reg |= IOSTE_PS_16M; break;
+	default: BUG();
 	}
 
+	gap_base = gap_base >> IO_SEGMENT_SHIFT;
+	gap_size = gap_size >> IO_SEGMENT_SHIFT;
+
 	pr_debug("Setting up IOMMU stab:\n");
-	for (i = base >> IO_SEGMENT_SHIFT; i < segments; i++) {
-		iommu->stab[i] = reg |
-			(__pa(iommu->ptab) + n_pte_pages * IOMMU_PAGE_SIZE * i);
+	for (i = start_seg; i < (start_seg + segments); i++) {
+		if (i >= gap_base && i < (gap_base + gap_size)) {
+			pr_debug("\toverlap at %d, skipping\n", i);
+			continue;
+		}
+		iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) *
+					(i - start_seg));
 		pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]);
 	}
+
+	return ptab;
 }
 
 static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
@@ -387,7 +394,7 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
 
 	if (cell_iommu_find_ioc(iommu->nid, &xlate_base))
 		panic("%s: missing IOC register mappings for node %d\n",
-		      __FUNCTION__, iommu->nid);
+		      __func__, iommu->nid);
 
 	iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size);
 	iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset;
@@ -423,7 +430,9 @@ static void cell_iommu_enable_hardware(struct cbe_iommu *iommu)
 static void cell_iommu_setup_hardware(struct cbe_iommu *iommu,
 	unsigned long base, unsigned long size)
 {
-	cell_iommu_setup_page_tables(iommu, base, size, 0, 0);
+	cell_iommu_setup_stab(iommu, base, size, 0, 0);
+	iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0,
+					    IOMMU_PAGE_SHIFT);
 	cell_iommu_enable_hardware(iommu);
 }
 
@@ -464,6 +473,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 			unsigned long pte_offset)
 {
 	struct iommu_window *window;
+	struct page *page;
 	u32 ioid;
 
 	ioid = cell_iommu_get_ioid(np);
@@ -475,13 +485,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 	window->size = size;
 	window->ioid = ioid;
 	window->iommu = iommu;
-	window->pte_offset = pte_offset;
 
 	window->table.it_blocksize = 16;
 	window->table.it_base = (unsigned long)iommu->ptab;
 	window->table.it_index = iommu->nid;
-	window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) +
-		window->pte_offset;
+	window->table.it_offset = (offset >> IOMMU_PAGE_SHIFT) + pte_offset;
 	window->table.it_size = size >> IOMMU_PAGE_SHIFT;
 
 	iommu_init_table(&window->table, iommu->nid);
@@ -504,6 +512,11 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 	 * This code also assumes that we have a window that starts at 0,
 	 * which is the case on all spider based blades.
 	 */
+	page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0);
+	BUG_ON(!page);
+	iommu->pad_page = page_address(page);
+	clear_page(iommu->pad_page);
+
 	__set_bit(0, window->table.it_map);
 	tce_build_cell(&window->table, window->table.it_offset, 1,
 		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
@@ -549,7 +562,7 @@ static void cell_dma_dev_setup_iommu(struct device *dev)
 	archdata->dma_data = &window->table;
 }
 
-static void cell_dma_dev_setup_static(struct device *dev);
+static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
 {
@@ -557,7 +570,7 @@ static void cell_dma_dev_setup(struct device *dev)
 
 	/* Order is important here, these are not mutually exclusive */
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
-		cell_dma_dev_setup_static(dev);
+		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
 		cell_dma_dev_setup_iommu(dev);
 	else if (get_pci_dma_ops() == &dma_direct_ops)
@@ -789,17 +802,24 @@ static int __init cell_iommu_init_disabled(void)
 
 static u64 cell_iommu_get_fixed_address(struct device *dev)
 {
-	u64 cpu_addr, size, best_size, pci_addr = OF_BAD_ADDR;
+	u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR;
 	struct device_node *np;
 	const u32 *ranges = NULL;
-	int i, len, best;
+	int i, len, best, naddr, nsize, pna, range_size;
 
 	np = of_node_get(dev->archdata.of_node);
-	while (np) {
+	while (1) {
+		naddr = of_n_addr_cells(np);
+		nsize = of_n_size_cells(np);
+		np = of_get_next_parent(np);
+		if (!np)
+			break;
+
 		ranges = of_get_property(np, "dma-ranges", &len);
-		if (ranges)
+
+		/* Ignore empty ranges, they imply no translation required */
+		if (ranges && len > 0)
 			break;
-		np = of_get_next_parent(np);
 	}
 
 	if (!ranges) {
@@ -809,15 +829,17 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
 
 	len /= sizeof(u32);
 
+	pna = of_n_addr_cells(np);
+	range_size = naddr + nsize + pna;
+
 	/* dma-ranges format:
-	 * 1 cell:  pci space
-	 * 2 cells: pci address
-	 * 2 cells: parent address
-	 * 2 cells: size
+	 * child addr	: naddr cells
+	 * parent addr	: pna cells
+	 * size		: nsize cells
 	 */
-	for (i = 0, best = -1, best_size = 0; i < len; i += 7) {
-		cpu_addr = of_translate_dma_address(np, ranges +i + 3);
-		size = of_read_number(ranges + i + 5, 2);
+	for (i = 0, best = -1, best_size = 0; i < len; i += range_size) {
+		cpu_addr = of_translate_dma_address(np, ranges + i + naddr);
+		size = of_read_number(ranges + i + naddr + pna, nsize);
 
 		if (cpu_addr == 0 && size > best_size) {
 			best = i;
@@ -825,15 +847,15 @@ static u64 cell_iommu_get_fixed_address(struct device *dev)
 		}
 	}
 
-	if (best >= 0)
-		pci_addr = of_read_number(ranges + best + 1, 2);
-	else
+	if (best >= 0) {
+		dev_addr = of_read_number(ranges + best, naddr);
+	} else
 		dev_dbg(dev, "iommu: no suitable range found!\n");
 
 out:
 	of_node_put(np);
 
-	return pci_addr;
+	return dev_addr;
 }
 
 static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
@@ -858,7 +880,7 @@ static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask)
 	return 0;
 }
 
-static void cell_dma_dev_setup_static(struct device *dev)
+static void cell_dma_dev_setup_fixed(struct device *dev)
 {
 	struct dev_archdata *archdata = &dev->archdata;
 	u64 addr;
@@ -869,35 +891,45 @@ static void cell_dma_dev_setup_static(struct device *dev)
 	dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
 }
 
+static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
+			   unsigned long base_pte)
+{
+	unsigned long segment, offset;
+
+	segment = addr >> IO_SEGMENT_SHIFT;
+	offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24));
+	ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long));
+
+	pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n",
+		  addr, ptab, segment, offset);
+
+	ptab[offset] = base_pte | (__pa(addr) & IOPTE_RPN_Mask);
+}
+
 static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 	struct device_node *np, unsigned long dbase, unsigned long dsize,
 	unsigned long fbase, unsigned long fsize)
 {
-	unsigned long base_pte, uaddr, *io_pte;
-	int i;
+	unsigned long base_pte, uaddr, ioaddr, *ptab;
 
-	dma_iommu_fixed_base = fbase;
+	ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24);
 
-	/* convert from bytes into page table indices */
-	dbase = dbase >> IOMMU_PAGE_SHIFT;
-	dsize = dsize >> IOMMU_PAGE_SHIFT;
-	fbase = fbase >> IOMMU_PAGE_SHIFT;
-	fsize = fsize >> IOMMU_PAGE_SHIFT;
+	dma_iommu_fixed_base = fbase;
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	io_pte = iommu->ptab;
 	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
 		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
-	uaddr = 0;
-	for (i = fbase; i < fbase + fsize; i++, uaddr += IOMMU_PAGE_SIZE) {
+	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
 		/* Don't touch the dynamic region */
-		if (i >= dbase && i < (dbase + dsize)) {
-			pr_debug("iommu: static/dynamic overlap, skipping\n");
+		ioaddr = uaddr + fbase;
+		if (ioaddr >= dbase && ioaddr < (dbase + dsize)) {
+			pr_debug("iommu: fixed/dynamic overlap, skipping\n");
 			continue;
 		}
-		io_pte[i] = base_pte | (__pa(uaddr) & IOPTE_RPN_Mask);
+
+		insert_16M_pte(uaddr, ptab, base_pte);
 	}
 
 	mb();
@@ -995,7 +1027,9 @@ static int __init cell_iommu_fixed_mapping_init(void)
 			"fixed window 0x%lx-0x%lx\n", iommu->nid, dbase,
 			 dbase + dsize, fbase, fbase + fsize);
 
-		cell_iommu_setup_page_tables(iommu, dbase, dsize, fbase, fsize);
+		cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize);
+		iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0,
+						    IOMMU_PAGE_SHIFT);
 		cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize,
 					     fbase, fsize);
 		cell_iommu_enable_hardware(iommu);
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 0304589c0a80..8a3631ce912b 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -65,7 +65,7 @@ static void cbe_power_save(void)
 		break;
 	default:
 		printk(KERN_WARNING "%s: unknown configuration\n",
-			__FUNCTION__);
+			__func__);
 		break;
 	}
 	mtspr(SPRN_TSC_CELL, thread_switch_control);
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index e43024c0392e..655704ad03cf 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -132,7 +132,7 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
 				(unsigned int)(addr >> 32),
 				(unsigned int)(addr & 0xffffffff))) {
 		printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n",
-				__FUNCTION__, nid);
+				__func__, nid);
 		goto out_free_pages;
 	}
 
@@ -162,7 +162,7 @@ static int __init cbe_ptcal_enable(void)
 	if (!size)
 		return -ENODEV;
 
-	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size);
+	pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size);
 	order = get_order(*size);
 	of_node_put(np);
 
@@ -180,7 +180,7 @@ static int __init cbe_ptcal_enable(void)
 		const u32 *nid = of_get_property(np, "node-id", NULL);
 		if (!nid) {
 			printk(KERN_ERR "%s: node %s is missing node-id?\n",
-					__FUNCTION__, np->full_name);
+					__func__, np->full_name);
 			continue;
 		}
 		cbe_ptcal_enable_on_node(*nid, order);
@@ -195,13 +195,13 @@ static int cbe_ptcal_disable(void)
 	struct ptcal_area *area, *tmp;
 	int ret = 0;
 
-	pr_debug("%s: disabling PTCAL\n", __FUNCTION__);
+	pr_debug("%s: disabling PTCAL\n", __func__);
 
 	list_for_each_entry_safe(area, tmp, &ptcal_list, list) {
 		/* disable ptcal on this node */
 		if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) {
 			printk(KERN_ERR "%s: error disabling PTCAL "
-					"on node %d!\n", __FUNCTION__,
+					"on node %d!\n", __func__,
 					area->nid);
 			ret = -EIO;
 			continue;
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index a7f609b3b876..5c531e8f9f6f 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -81,6 +81,42 @@ static void cell_progress(char *s, unsigned short hex)
 	printk("*** %04x : %s\n", hex, s ? s : "");
 }
 
+static void cell_fixup_pcie_rootcomplex(struct pci_dev *dev)
+{
+	struct pci_controller *hose;
+	const char *s;
+	int i;
+
+	if (!machine_is(cell))
+		return;
+
+	/* We're searching for a direct child of the PHB */
+	if (dev->bus->self != NULL || dev->devfn != 0)
+		return;
+
+	hose = pci_bus_to_host(dev->bus);
+	if (hose == NULL)
+		return;
+
+	/* Only on PCIE */
+	if (!of_device_is_compatible(hose->dn, "pciex"))
+		return;
+
+	/* And only on axon */
+	s = of_get_property(hose->dn, "model", NULL);
+	if (!s || strcmp(s, "Axon") != 0)
+		return;
+
+	for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) {
+		dev->resource[i].start = dev->resource[i].end = 0;
+		dev->resource[i].flags = 0;
+	}
+
+	printk(KERN_DEBUG "PCI: Hiding resources on Axon PCIE RC %s\n",
+	       pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, cell_fixup_pcie_rootcomplex);
+
 static int __init cell_publish_devices(void)
 {
 	int node;
@@ -149,6 +185,11 @@ static void __init cell_init_irq(void)
 	mpic_init_IRQ();
 }
 
+static void __init cell_set_dabrx(void)
+{
+	mtspr(SPRN_DABRX, DABRX_KERNEL | DABRX_USER);
+}
+
 static void __init cell_setup_arch(void)
 {
 #ifdef CONFIG_SPU_BASE
@@ -158,6 +199,8 @@ static void __init cell_setup_arch(void)
 
 	cbe_regs_init();
 
+	cell_set_dabrx();
+
 #ifdef CONFIG_CBE_RAS
 	cbe_ras_init();
 #endif
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 87eb07f94c5f..6bab44b7716b 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -81,9 +81,12 @@ struct spu_slb {
 void spu_invalidate_slbs(struct spu *spu)
 {
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
+	unsigned long flags;
 
+	spin_lock_irqsave(&spu->register_lock, flags);
 	if (spu_mfc_sr1_get(spu) & MFC_STATE1_RELOCATE_MASK)
 		out_be64(&priv2->slb_invalidate_all_W, 0UL);
+	spin_unlock_irqrestore(&spu->register_lock, flags);
 }
 EXPORT_SYMBOL_GPL(spu_invalidate_slbs);
 
@@ -148,7 +151,11 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
 			__func__, slbe, slb->vsid, slb->esid);
 
 	out_be64(&priv2->slb_index_W, slbe);
+	/* set invalid before writing vsid */
+	out_be64(&priv2->slb_esid_RW, 0);
+	/* now it's safe to write the vsid */
 	out_be64(&priv2->slb_vsid_RW, slb->vsid);
+	/* setting the new esid makes the entry valid again */
 	out_be64(&priv2->slb_esid_RW, slb->esid);
 }
 
@@ -158,7 +165,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 	struct spu_slb slb;
 	int psize;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 
 	slb.esid = (ea & ESID_MASK) | SLB_ESID_V;
 
@@ -208,7 +215,7 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea)
 extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX
 static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 {
-	pr_debug("%s, %lx, %lx\n", __FUNCTION__, dsisr, ea);
+	pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
 
 	/* Handle kernel space hash faults immediately.
 	   User hash faults need to be deferred to process context. */
@@ -290,9 +297,11 @@ void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
 		nr_slbs++;
 	}
 
+	spin_lock_irq(&spu->register_lock);
 	/* Add the set of SLBs */
 	for (i = 0; i < nr_slbs; i++)
 		spu_load_slb(spu, i, &slbs[i]);
+	spin_unlock_irq(&spu->register_lock);
 }
 EXPORT_SYMBOL_GPL(spu_setup_kernel_slbs);
 
@@ -337,13 +346,14 @@ spu_irq_class_1(int irq, void *data)
 	if (stat & CLASS1_STORAGE_FAULT_INTR)
 		spu_mfc_dsisr_set(spu, 0ul);
 	spu_int_stat_clear(spu, 1, stat);
-	spin_unlock(&spu->register_lock);
-	pr_debug("%s: %lx %lx %lx %lx\n", __FUNCTION__, mask, stat,
-			dar, dsisr);
 
 	if (stat & CLASS1_SEGMENT_FAULT_INTR)
 		__spu_trap_data_seg(spu, dar);
 
+	spin_unlock(&spu->register_lock);
+	pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat,
+			dar, dsisr);
+
 	if (stat & CLASS1_STORAGE_FAULT_INTR)
 		__spu_trap_data_map(spu, dar, dsisr);
 
@@ -716,7 +726,7 @@ static int __init init_spu_base(void)
 
 	if (ret < 0) {
 		printk(KERN_WARNING "%s: Error initializing spus\n",
-			__FUNCTION__);
+			__func__);
 		goto out_unregister_sysdev_class;
 	}
 
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index dceb8b6a9382..19f6bfdbb933 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -54,7 +54,7 @@ long spu_sys_callback(struct spu_syscall_block *s)
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
-		pr_debug("%s: invalid syscall #%ld", __FUNCTION__, s->nr_ret);
+		pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
 		return -ENOSYS;
 	}
 
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index d351bdebf5f1..4c506c1463cd 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -92,7 +92,7 @@ static int __init spu_map_interrupts_old(struct spu *spu,
 
 	tmp = of_get_property(np->parent->parent, "node-id", NULL);
 	if (!tmp) {
-		printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+		printk(KERN_WARNING "%s: can't find node-id\n", __func__);
 		nid = spu->node;
 	} else
 		nid = tmp[0];
@@ -296,7 +296,7 @@ static int __init of_enumerate_spus(int (*fn)(void *data))
 		ret = fn(node);
 		if (ret) {
 			printk(KERN_WARNING "%s: Error initializing %s\n",
-				__FUNCTION__, node->name);
+				__func__, node->name);
 			break;
 		}
 		n++;
@@ -327,7 +327,7 @@ static int __init of_create_spu(struct spu *spu, void *data)
 		if (!legacy_map) {
 			legacy_map = 1;
 			printk(KERN_WARNING "%s: Legacy device tree found, "
-				"trying to map old style\n", __FUNCTION__);
+				"trying to map old style\n", __func__);
 		}
 		ret = spu_map_device_old(spu);
 		if (ret) {
@@ -342,7 +342,7 @@ static int __init of_create_spu(struct spu *spu, void *data)
 		if (!legacy_irq) {
 			legacy_irq = 1;
 			printk(KERN_WARNING "%s: Legacy device tree found, "
-				"trying old style irq\n", __FUNCTION__);
+				"trying old style irq\n", __func__);
 		}
 		ret = spu_map_interrupts_old(spu, spe);
 		if (ret) {
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 133995ed5cc7..0ad83aeb70b1 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -109,13 +109,12 @@ void spu_forget(struct spu_context *ctx)
 
 	/*
 	 * This is basically an open-coded spu_acquire_saved, except that
-	 * we don't acquire the state mutex interruptible.
+	 * we don't acquire the state mutex interruptible, and we don't
+	 * want this context to be rescheduled on release.
 	 */
 	mutex_lock(&ctx->state_mutex);
-	if (ctx->state != SPU_STATE_SAVED) {
-		set_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags);
+	if (ctx->state != SPU_STATE_SAVED)
 		spu_deactivate(ctx);
-	}
 
 	mm = ctx->owner;
 	ctx->owner = NULL;
@@ -171,7 +170,8 @@ void spu_release_saved(struct spu_context *ctx)
 {
 	BUG_ON(ctx->state != SPU_STATE_SAVED);
 
-	if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags))
+	if (test_and_clear_bit(SPU_SCHED_WAS_ACTIVE, &ctx->sched_flags) &&
+			test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 		spu_activate(ctx, 0);
 
 	spu_release(ctx);
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index 0c6a96b82b2d..b962c3ab470c 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -133,8 +133,6 @@ static struct spu_context *coredump_next_context(int *fd)
 		if (ctx->flags & SPU_CREATE_NOSCHED)
 			continue;
 
-		/* start searching the next fd next time we're called */
-		(*fd)++;
 		break;
 	}
 
@@ -157,6 +155,9 @@ int spufs_coredump_extra_notes_size(void)
 			break;
 
 		size += rc;
+
+		/* start searching the next fd next time */
+		fd++;
 	}
 
 	return size;
@@ -239,6 +240,9 @@ int spufs_coredump_extra_notes_write(struct file *file, loff_t *foffset)
 		}
 
 		spu_release_saved(ctx);
+
+		/* start searching the next fd next time */
+		fd++;
 	}
 
 	return 0;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c66c3756970d..08f44d1971ac 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -32,7 +32,6 @@
 #include <linux/marker.h>
 
 #include <asm/io.h>
-#include <asm/semaphore.h>
 #include <asm/spu.h>
 #include <asm/spu_info.h>
 #include <asm/uaccess.h>
@@ -367,6 +366,13 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 		return NOPFN_SIGBUS;
 
 	/*
+	 * Because we release the mmap_sem, the context may be destroyed while
+	 * we're in spu_wait. Grab an extra reference so it isn't destroyed
+	 * in the meantime.
+	 */
+	get_spu_context(ctx);
+
+	/*
 	 * We have to wait for context to be loaded before we have
 	 * pages to hand out to the user, but we don't want to wait
 	 * with the mmap_sem held.
@@ -375,7 +381,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 	 * hanged.
 	 */
 	if (spu_acquire(ctx))
-		return NOPFN_REFAULT;
+		goto refault;
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		up_read(&current->mm->mmap_sem);
@@ -391,6 +397,9 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 	if (!ret)
 		spu_release(ctx);
+
+refault:
+	put_spu_context(ctx);
 	return NOPFN_REFAULT;
 }
 
@@ -1327,7 +1336,7 @@ static u64 spufs_signal1_type_get(struct spu_context *ctx)
 	return ctx->ops->signal1_type_get(ctx);
 }
 DEFINE_SPUFS_ATTRIBUTE(spufs_signal1_type, spufs_signal1_type_get,
-		       spufs_signal1_type_set, "%llu", SPU_ATTR_ACQUIRE);
+		       spufs_signal1_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
 
 
 static int spufs_signal2_type_set(void *data, u64 val)
@@ -1349,7 +1358,7 @@ static u64 spufs_signal2_type_get(struct spu_context *ctx)
 	return ctx->ops->signal2_type_get(ctx);
 }
 DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
-		       spufs_signal2_type_set, "%llu", SPU_ATTR_ACQUIRE);
+		       spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
 
 #if SPUFS_MMAP_4K
 static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
@@ -1546,7 +1555,7 @@ void spufs_mfc_callback(struct spu *spu)
 
 	wake_up_all(&ctx->mfc_wq);
 
-	pr_debug("%s %s\n", __FUNCTION__, spu->name);
+	pr_debug("%s %s\n", __func__, spu->name);
 	if (ctx->mfc_fasync) {
 		u32 free_elements, tagstatus;
 		unsigned int mask;
@@ -1780,7 +1789,7 @@ static unsigned int spufs_mfc_poll(struct file *file,poll_table *wait)
 	if (tagstatus & ctx->tagwait)
 		mask |= POLLIN | POLLRDNORM;
 
-	pr_debug("%s: free %d tagstatus %d tagwait %d\n", __FUNCTION__,
+	pr_debug("%s: free %d tagstatus %d tagwait %d\n", __func__,
 		free_elements, tagstatus, ctx->tagwait);
 
 	return mask;
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index 6d1228c66c5e..0c32a05ab068 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -35,7 +35,6 @@
 #include <linux/parser.h>
 
 #include <asm/prom.h>
-#include <asm/semaphore.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
 #include <asm/uaccess.h>
diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c
index 6221968c2a3c..96bf7c2b86fc 100644
--- a/arch/powerpc/platforms/cell/spufs/run.c
+++ b/arch/powerpc/platforms/cell/spufs/run.c
@@ -98,7 +98,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
 			!= MFC_CNTL_PURGE_DMA_COMPLETE) {
 		if (time_after(jiffies, timeout)) {
 			printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
-					__FUNCTION__);
+					__func__);
 			ret = -EIO;
 			goto out;
 		}
@@ -124,7 +124,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
 				status_loading) {
 		if (time_after(jiffies, timeout)) {
 			printk(KERN_ERR "%s: timeout waiting for loader\n",
-					__FUNCTION__);
+					__func__);
 			ret = -EIO;
 			goto out_drop_priv;
 		}
@@ -134,7 +134,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
 	if (!(status & SPU_STATUS_RUNNING)) {
 		/* If isolated LOAD has failed: run SPU, we will get a stop-and
 		 * signal later. */
-		pr_debug("%s: isolated LOAD failed\n", __FUNCTION__);
+		pr_debug("%s: isolated LOAD failed\n", __func__);
 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE);
 		ret = -EACCES;
 		goto out_drop_priv;
@@ -142,7 +142,7 @@ static int spu_setup_isolated(struct spu_context *ctx)
 
 	if (!(status & SPU_STATUS_ISOLATED_STATE)) {
 		/* This isn't allowed by the CBEA, but check anyway */
-		pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__);
+		pr_debug("%s: SPU fell out of isolated mode?\n", __func__);
 		ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP);
 		ret = -EINVAL;
 		goto out_drop_priv;
@@ -220,6 +220,7 @@ static int spu_run_init(struct spu_context *ctx, u32 *npc)
 		}
 	}
 
+	set_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
 	return 0;
 }
 
@@ -234,7 +235,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc,
 	*npc = ctx->ops->npc_read(ctx);
 
 	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
-	ctx->policy = SCHED_IDLE;
+	clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags);
 	spu_release(ctx);
 
 	if (signal_pending(current))
@@ -281,7 +282,7 @@ static int spu_handle_restartsys(struct spu_context *ctx, long *spu_ret,
 		break;
 	default:
 		printk(KERN_WARNING "%s: unexpected return code %ld\n",
-			__FUNCTION__, *spu_ret);
+			__func__, *spu_ret);
 		ret = 0;
 	}
 	return ret;
@@ -322,6 +323,10 @@ static int spu_process_callback(struct spu_context *ctx)
 			return -EINTR;
 	}
 
+	/* need to re-get the ls, as it may have changed when we released the
+	 * spu */
+	ls = (void __iomem *)ctx->ops->get_ls(ctx);
+
 	/* write result, jump over indirect pointer */
 	memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret));
 	ctx->ops->npc_write(ctx, npc);
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 3a5972117de7..00528ef84ad2 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -246,7 +246,7 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	spu_switch_notify(spu, ctx);
 	ctx->state = SPU_STATE_RUNNABLE;
 
-	spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED);
+	spuctx_switch_state(ctx, SPU_UTIL_USER);
 }
 
 /*
@@ -867,7 +867,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 	if (ctx->policy == SCHED_FIFO)
 		goto out;
 
-	if (--ctx->time_slice && ctx->policy != SCHED_IDLE)
+	if (--ctx->time_slice && test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 		goto out;
 
 	spu = ctx->spu;
@@ -877,7 +877,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
 		spu_unschedule(spu, ctx);
-		if (ctx->policy != SCHED_IDLE)
+		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {
 		spu_context_nospu_trace(spusched_tick__newslice, ctx);
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 2c2fe3c07d72..cdc515182f82 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -44,6 +44,7 @@ struct spu_gang;
 enum {
 	SPU_SCHED_NOTIFY_ACTIVE,
 	SPU_SCHED_WAS_ACTIVE,	/* was active upon spu_acquire_saved()  */
+	SPU_SCHED_SPU_RUN,	/* context is within spu_run */
 };
 
 struct spu_context {
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 01974f7776e1..79aa773f3c99 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -58,12 +58,12 @@ static int sputrace_sprint(char *tbuf, int n)
 		ktime_to_timespec(ktime_sub(t->tstamp, sputrace_start));
 
 	return snprintf(tbuf, n,
-		"[%lu.%09lu] %d: %s (thread = %d, spu = %d)\n",
+		"[%lu.%09lu] %d: %s (ctxthread = %d, spu = %d)\n",
 		(unsigned long) tv.tv_sec,
 		(unsigned long) tv.tv_nsec,
-		t->owner_tid,
-		t->name,
 		t->curr_tid,
+		t->name,
+		t->owner_tid,
 		t->number);
 }
 
@@ -188,6 +188,7 @@ struct spu_probe spu_probes[] = {
 	{ "spufs_ps_nopfn__insert", "%p %p", spu_context_event },
 	{ "spu_acquire_saved__enter", "%p", spu_context_nospu_event },
 	{ "destroy_spu_context__enter", "%p", spu_context_nospu_event },
+	{ "spufs_stop_callback__enter", "%p %p", spu_context_event },
 };
 
 static int __init sputrace_init(void)
diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c
index 6f5886c7b1f9..d2a1249d36dd 100644
--- a/arch/powerpc/platforms/cell/spufs/switch.c
+++ b/arch/powerpc/platforms/cell/spufs/switch.c
@@ -34,6 +34,7 @@
 
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/hardirq.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
@@ -117,6 +118,8 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 	 *     Write INT_MASK_class1 with value of 0.
 	 *     Save INT_Mask_class2 in CSA.
 	 *     Write INT_MASK_class2 with value of 0.
+	 *     Synchronize all three interrupts to be sure
+	 *     we no longer execute a handler on another CPU.
 	 */
 	spin_lock_irq(&spu->register_lock);
 	if (csa) {
@@ -129,6 +132,9 @@ static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 	spu_int_mask_set(spu, 2, 0ul);
 	eieio();
 	spin_unlock_irq(&spu->register_lock);
+	synchronize_irq(spu->irqs[0]);
+	synchronize_irq(spu->irqs[1]);
+	synchronize_irq(spu->irqs[2]);
 }
 
 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
@@ -1809,6 +1815,7 @@ static void save_csa(struct spu_state *prev, struct spu *spu)
 	save_mfc_csr_ato(prev, spu);	/* Step 24. */
 	save_mfc_tclass_id(prev, spu);	/* Step 25. */
 	set_mfc_tclass_id(prev, spu);	/* Step 26. */
+	save_mfc_cmd(prev, spu);	/* Step 26a - moved from 44. */
 	purge_mfc_queue(prev, spu);	/* Step 27. */
 	wait_purge_complete(prev, spu);	/* Step 28. */
 	setup_mfc_sr1(prev, spu);	/* Step 30. */
@@ -1825,7 +1832,6 @@ static void save_csa(struct spu_state *prev, struct spu *spu)
 	save_ppuint_mb(prev, spu);	/* Step 41. */
 	save_ch_part1(prev, spu);	/* Step 42. */
 	save_spu_mb(prev, spu);	        /* Step 43. */
-	save_mfc_cmd(prev, spu);	/* Step 44. */
 	reset_ch(prev, spu);	        /* Step 45. */
 }
 
diff --git a/arch/powerpc/platforms/celleb/beat.c b/arch/powerpc/platforms/celleb/beat.c
index 93ebb7d85120..b64b171f245b 100644
--- a/arch/powerpc/platforms/celleb/beat.c
+++ b/arch/powerpc/platforms/celleb/beat.c
@@ -48,6 +48,7 @@ void beat_power_off(void)
 }
 
 u64 beat_halt_code = 0x1000000000000000UL;
+EXPORT_SYMBOL(beat_halt_code);
 
 void beat_halt(void)
 {
@@ -94,9 +95,8 @@ ssize_t beat_nvram_read(char *buf, size_t count, loff_t *index)
 		len = count;
 		if (len > BEAT_NVRW_CNT)
 			len = BEAT_NVRW_CNT;
-		if (beat_eeprom_read(i, len, p)) {
+		if (beat_eeprom_read(i, len, p))
 			return -EIO;
-		}
 
 		p += len;
 		i += len;
@@ -121,9 +121,8 @@ ssize_t beat_nvram_write(char *buf, size_t count, loff_t *index)
 		len = count;
 		if (len > BEAT_NVRW_CNT)
 			len = BEAT_NVRW_CNT;
-		if (beat_eeprom_write(i, len, p)) {
+		if (beat_eeprom_write(i, len, p))
 			return -EIO;
-		}
 
 		p += len;
 		i += len;
@@ -149,13 +148,14 @@ int64_t beat_get_term_char(u64 vterm, u64 *len, u64 *t1, u64 *t2)
 	u64 db[2];
 	s64 ret;
 
-	ret = beat_get_characters_from_console(vterm, len, (u8*)db);
+	ret = beat_get_characters_from_console(vterm, len, (u8 *)db);
 	if (ret == 0) {
 		*t1 = db[0];
 		*t2 = db[1];
 	}
 	return ret;
 }
+EXPORT_SYMBOL(beat_get_term_char);
 
 int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
 {
@@ -163,8 +163,9 @@ int64_t beat_put_term_char(u64 vterm, u64 len, u64 t1, u64 t2)
 
 	db[0] = t1;
 	db[1] = t2;
-	return beat_put_characters_to_console(vterm, len, (u8*)db);
+	return beat_put_characters_to_console(vterm, len, (u8 *)db);
 }
+EXPORT_SYMBOL(beat_put_term_char);
 
 void beat_power_save(void)
 {
@@ -261,7 +262,3 @@ static int __init beat_event_init(void)
 }
 
 device_initcall(beat_event_init);
-
-EXPORT_SYMBOL(beat_get_term_char);
-EXPORT_SYMBOL(beat_put_term_char);
-EXPORT_SYMBOL(beat_halt_code);
diff --git a/arch/powerpc/platforms/celleb/beat.h b/arch/powerpc/platforms/celleb/beat.h
index b2e292df13ca..32c8efcedc80 100644
--- a/arch/powerpc/platforms/celleb/beat.h
+++ b/arch/powerpc/platforms/celleb/beat.h
@@ -21,11 +21,8 @@
 #ifndef _CELLEB_BEAT_H
 #define _CELLEB_BEAT_H
 
-#define DABRX_KERNEL		(1UL<<1)
-#define DABRX_USER		(1UL<<0)
-
-int64_t beat_get_term_char(uint64_t,uint64_t*,uint64_t*,uint64_t*);
-int64_t beat_put_term_char(uint64_t,uint64_t,uint64_t,uint64_t);
+int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *);
+int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t);
 int64_t beat_repository_encode(int, const char *, uint64_t[4]);
 void beat_restart(char *);
 void beat_power_off(void);
diff --git a/arch/powerpc/platforms/celleb/beat_wrapper.h b/arch/powerpc/platforms/celleb/beat_wrapper.h
index cbc1487df7de..b47dfda48d06 100644
--- a/arch/powerpc/platforms/celleb/beat_wrapper.h
+++ b/arch/powerpc/platforms/celleb/beat_wrapper.h
@@ -197,7 +197,8 @@ static inline s64 beat_put_characters_to_console(u64 termno, u64 len,
 	u64 b[2];
 
 	memcpy(b, buffer, len);
-	return beat_hcall_norets(HV_put_characters_to_console, termno, len,					 b[0], b[1]);
+	return beat_hcall_norets(HV_put_characters_to_console, termno, len,
+		b[0], b[1]);
 }
 
 static inline s64 beat_get_spe_privileged_state_1_registers(
diff --git a/arch/powerpc/platforms/celleb/htab.c b/arch/powerpc/platforms/celleb/htab.c
index fbf27c74ebda..81467ff055c8 100644
--- a/arch/powerpc/platforms/celleb/htab.c
+++ b/arch/powerpc/platforms/celleb/htab.c
@@ -35,9 +35,9 @@
 #include "beat_wrapper.h"
 
 #ifdef DEBUG_LOW
-#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
+#define DBG_LOW(fmt...) do { udbg_printf(fmt); } while (0)
 #else
-#define DBG_LOW(fmt...) do { } while(0)
+#define DBG_LOW(fmt...) do { } while (0)
 #endif
 
 static DEFINE_SPINLOCK(beat_htab_lock);
@@ -116,7 +116,8 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 		hpte_r &= ~_PAGE_COHERENT;
 
 	spin_lock(&beat_htab_lock);
-	if ((lpar_rc = beat_read_mask(hpte_group)) == 0) {
+	lpar_rc = beat_read_mask(hpte_group);
+	if (lpar_rc == 0) {
 		if (!(vflags & HPTE_V_BOLTED))
 			DBG_LOW(" full\n");
 		spin_unlock(&beat_htab_lock);
diff --git a/arch/powerpc/platforms/celleb/interrupt.c b/arch/powerpc/platforms/celleb/interrupt.c
index c7c68ca70c82..69562a867876 100644
--- a/arch/powerpc/platforms/celleb/interrupt.c
+++ b/arch/powerpc/platforms/celleb/interrupt.c
@@ -34,7 +34,7 @@ static DEFINE_SPINLOCK(beatic_irq_mask_lock);
 static uint64_t	beatic_irq_mask_enable[(MAX_IRQS+255)/64];
 static uint64_t	beatic_irq_mask_ack[(MAX_IRQS+255)/64];
 
-static struct irq_host *beatic_host = NULL;
+static struct irq_host *beatic_host;
 
 /*
  * In this implementation, "virq" == "IRQ plug number",
@@ -49,13 +49,13 @@ static inline void beatic_update_irq_mask(unsigned int irq_plug)
 
 	off = (irq_plug / 256) * 4;
 	masks[0] = beatic_irq_mask_enable[off + 0]
-	           & beatic_irq_mask_ack[off + 0];
+		& beatic_irq_mask_ack[off + 0];
 	masks[1] = beatic_irq_mask_enable[off + 1]
-	           & beatic_irq_mask_ack[off + 1];
+		& beatic_irq_mask_ack[off + 1];
 	masks[2] = beatic_irq_mask_enable[off + 2]
-	           & beatic_irq_mask_ack[off + 2];
+		& beatic_irq_mask_ack[off + 2];
 	masks[3] = beatic_irq_mask_enable[off + 3]
-	           & beatic_irq_mask_ack[off + 3];
+		& beatic_irq_mask_ack[off + 3];
 	if (beat_set_interrupt_mask(irq_plug&~255UL,
 		masks[0], masks[1], masks[2], masks[3]) != 0)
 		panic("Failed to set mask IRQ!");
@@ -96,7 +96,8 @@ static void beatic_end_irq(unsigned int irq_plug)
 	s64 err;
 	unsigned long flags;
 
-	if ((err = beat_downcount_of_interrupt(irq_plug)) != 0) {
+	err = beat_downcount_of_interrupt(irq_plug);
+	if (err != 0) {
 		if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
 			panic("Failed to downcount IRQ! Error = %16lx", err);
 
@@ -138,7 +139,8 @@ static int beatic_pic_host_map(struct irq_host *h, unsigned int virq,
 	struct irq_desc *desc = get_irq_desc(virq);
 	int64_t	err;
 
-	if ((err = beat_construct_and_connect_irq_plug(virq, hw)) < 0)
+	err = beat_construct_and_connect_irq_plug(virq, hw);
+	if (err < 0)
 		return -EIO;
 
 	desc->status |= IRQ_LEVEL;
@@ -202,22 +204,22 @@ static inline unsigned int beatic_get_irq_plug(void)
 		beat_detect_pending_interrupts(i, pending);
 		__asm__ ("cntlzd %0,%1":"=r"(ub):
 			"r"(pending[0] & beatic_irq_mask_enable[i/64+0]
-			               & beatic_irq_mask_ack[i/64+0]));
+				       & beatic_irq_mask_ack[i/64+0]));
 		if (ub != 64)
 			return i + ub + 0;
 		__asm__ ("cntlzd %0,%1":"=r"(ub):
 			"r"(pending[1] & beatic_irq_mask_enable[i/64+1]
-			               & beatic_irq_mask_ack[i/64+1]));
+				       & beatic_irq_mask_ack[i/64+1]));
 		if (ub != 64)
 			return i + ub + 64;
 		__asm__ ("cntlzd %0,%1":"=r"(ub):
 			"r"(pending[2] & beatic_irq_mask_enable[i/64+2]
-			               & beatic_irq_mask_ack[i/64+2]));
+				       & beatic_irq_mask_ack[i/64+2]));
 		if (ub != 64)
 			return i + ub + 128;
 		__asm__ ("cntlzd %0,%1":"=r"(ub):
 			"r"(pending[3] & beatic_irq_mask_enable[i/64+3]
-			               & beatic_irq_mask_ack[i/64+3]));
+				       & beatic_irq_mask_ack[i/64+3]));
 		if (ub != 64)
 			return i + ub + 192;
 	}
@@ -250,7 +252,7 @@ void __init beatic_init_IRQ(void)
 
 	/* Allocate an irq host */
 	beatic_host = irq_alloc_host(NULL, IRQ_HOST_MAP_NOMAP, 0,
-					 &beatic_pic_host_ops,
+				     &beatic_pic_host_ops,
 					 0);
 	BUG_ON(beatic_host == NULL);
 	irq_set_default_host(beatic_host);
diff --git a/arch/powerpc/platforms/celleb/scc_epci.c b/arch/powerpc/platforms/celleb/scc_epci.c
index a3c7cfbcb323..a999b393f6f6 100644
--- a/arch/powerpc/platforms/celleb/scc_epci.c
+++ b/arch/powerpc/platforms/celleb/scc_epci.c
@@ -161,9 +161,9 @@ static PCI_IO_ADDR celleb_epci_make_config_addr(
 	if (bus != hose->bus)
 		addr = celleb_epci_get_epci_cfg(hose) +
 		       (((bus->number & 0xff) << 16)
-		        | ((devfn & 0xff) << 8)
-		        | (where & 0xff)
-		        | 0x01000000);
+			| ((devfn & 0xff) << 8)
+			| (where & 0xff)
+			| 0x01000000);
 	else
 		addr = celleb_epci_get_epci_cfg(hose) +
 		       (((devfn & 0xff) << 8) | (where & 0xff));
@@ -174,7 +174,7 @@ static PCI_IO_ADDR celleb_epci_make_config_addr(
 }
 
 static int celleb_epci_read_config(struct pci_bus *bus,
-			unsigned int devfn, int where, int size, u32 * val)
+			unsigned int devfn, int where, int size, u32 *val)
 {
 	PCI_IO_ADDR epci_base;
 	PCI_IO_ADDR addr;
diff --git a/arch/powerpc/platforms/celleb/scc_sio.c b/arch/powerpc/platforms/celleb/scc_sio.c
index 610008211ca1..3a16c5b3c464 100644
--- a/arch/powerpc/platforms/celleb/scc_sio.c
+++ b/arch/powerpc/platforms/celleb/scc_sio.c
@@ -28,7 +28,7 @@
 
 /* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
     mmio=0xfff000-0x1000,0xff2000-0x1000 */
-static int txx9_serial_bitmap __initdata = 0;
+static int txx9_serial_bitmap __initdata;
 
 static struct {
 	uint32_t offset;
@@ -84,7 +84,7 @@ static int __init txx9_serial_config(char *ptr)
 	int	i;
 
 	for (;;) {
-		switch(get_option(&ptr, &i)) {
+		switch (get_option(&ptr, &i)) {
 		default:
 			return 0;
 		case 2:
diff --git a/arch/powerpc/platforms/celleb/spu_priv1.c b/arch/powerpc/platforms/celleb/spu_priv1.c
index 2bf6700f747a..bcc17f7fe8ad 100644
--- a/arch/powerpc/platforms/celleb/spu_priv1.c
+++ b/arch/powerpc/platforms/celleb/spu_priv1.c
@@ -183,8 +183,7 @@ static u64 resource_allocation_enable_get(struct spu *spu)
 	return enable;
 }
 
-const struct spu_priv1_ops spu_priv1_beat_ops =
-{
+const struct spu_priv1_ops spu_priv1_beat_ops = {
 	.int_mask_and = int_mask_and,
 	.int_mask_or = int_mask_or,
 	.int_mask_set = int_mask_set,
diff --git a/arch/powerpc/platforms/celleb/udbg_beat.c b/arch/powerpc/platforms/celleb/udbg_beat.c
index d888c4674c62..6b418f6b6175 100644
--- a/arch/powerpc/platforms/celleb/udbg_beat.c
+++ b/arch/powerpc/platforms/celleb/udbg_beat.c
@@ -54,7 +54,8 @@ static int udbg_getc_poll_beat(void)
 	if (inbuflen == 0) {
 		/* get some more chars. */
 		inbuflen = 0;
-		rc = beat_get_term_char(celleb_vtermno, &inbuflen, inbuf+0, inbuf+1);
+		rc = beat_get_term_char(celleb_vtermno, &inbuflen,
+					inbuf+0, inbuf+1);
 		if (rc != 0)
 			inbuflen = 0;	/* otherwise inbuflen is garbage */
 	}
@@ -78,7 +79,7 @@ static int udbg_getc_beat(void)
 		if (ch == -1) {
 			/* This shouldn't be needed...but... */
 			volatile unsigned long delay;
-			for (delay=0; delay < 2000000; delay++)
+			for (delay = 0; delay < 2000000; delay++)
 				;
 		} else {
 			return ch;
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d4f8bf581e3a..84e2d78b9a62 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -117,11 +117,11 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 	}
 
 	if (mpic_paddr == 0) {
-		printk("%s: No tsi108 PIC found !\n", __FUNCTION__);
+		printk("%s: No tsi108 PIC found !\n", __func__);
 		return;
 	}
 
-	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __FUNCTION__,
+	DBG("%s: tsi108 pic phys_addr = 0x%x\n", __func__,
 	    (u32) mpic_paddr);
 
 	mpic = mpic_alloc(tsi_pic, mpic_paddr,
@@ -140,17 +140,17 @@ static void __init mpc7448_hpc2_init_IRQ(void)
 #ifdef CONFIG_PCI
 	tsi_pci = of_find_node_by_type(NULL, "pci");
 	if (tsi_pci == NULL) {
-		printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
+		printk("%s: No tsi108 pci node found !\n", __func__);
 		return;
 	}
 	cascade_node = of_find_node_by_type(NULL, "pic-router");
 	if (cascade_node == NULL) {
-		printk("%s: No tsi108 pci cascade node found !\n", __FUNCTION__);
+		printk("%s: No tsi108 pci cascade node found !\n", __func__);
 		return;
 	}
 
 	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
-	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __FUNCTION__,
+	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
 	    (u32) cascade_pci_irq);
 	tsi108_pci_int_init(cascade_node);
 	set_irq_data(cascade_pci_irq, mpic);
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index 653a5eb91c90..5a19b9a1457c 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -49,13 +49,13 @@ static void __init prpmc2800_setup_arch(void)
 	 * ioremap mpp and gpp registers in case they are later
 	 * needed by prpmc2800_reset_board().
 	 */
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
 	reg = of_get_property(np, "reg", NULL);
 	paddr = of_translate_address(np, reg);
 	of_node_put(np);
 	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
 
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
 	reg = of_get_property(np, "reg", NULL);
 	paddr = of_translate_address(np, reg);
 	of_node_put(np);
diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S
index 5381038f0881..c775cd4b3d6e 100644
--- a/arch/powerpc/platforms/iseries/exception.S
+++ b/arch/powerpc/platforms/iseries/exception.S
@@ -38,11 +38,19 @@
 
 	.globl system_reset_iSeries
 system_reset_iSeries:
-	mfspr	r13,SPRN_SPRG3		/* Get paca address */
+	mfspr	r13,SPRN_SPRG3		/* Get alpaca address */
+	LOAD_REG_IMMEDIATE(r23, alpaca)
+	li	r0,ALPACA_SIZE
+	sub	r23,r13,r23
+	divdu	r23,r23,r0		/* r23 has cpu number */
+	LOAD_REG_IMMEDIATE(r13, paca)
+	mulli	r0,r23,PACA_SIZE
+	add	r13,r13,r0
+	mtspr	SPRN_SPRG3,r13		/* Save it away for the future */
 	mfmsr	r24
 	ori	r24,r24,MSR_RI
 	mtmsrd	r24			/* RI on */
-	lhz	r24,PACAPACAINDEX(r13)	/* Get processor # */
+	mr	r24,r23
 	cmpwi	0,r24,0			/* Are we processor 0? */
 	bne	1f
 	b	.__start_initialization_iSeries	/* Start up the first processor */
diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h
index 77c135ddbf1b..83e4ca42fc57 100644
--- a/arch/powerpc/platforms/iseries/ipl_parms.h
+++ b/arch/powerpc/platforms/iseries/ipl_parms.h
@@ -65,6 +65,4 @@ struct ItIplParmsReal {
 	u64	xRsvd13;		// Reserved			x38-x3F
 };
 
-extern struct ItIplParmsReal	xItIplParmsReal;
-
 #endif /* _ISERIES_IPL_PARMS_H */
diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c
index 8162049bb04d..98bd2d37038a 100644
--- a/arch/powerpc/platforms/iseries/lpardata.c
+++ b/arch/powerpc/platforms/iseries/lpardata.c
@@ -14,10 +14,10 @@
 #include <asm/ptrace.h>
 #include <asm/abs_addr.h>
 #include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
 #include <asm/paca.h>
 #include <asm/iseries/lpar_map.h>
 #include <asm/iseries/it_lp_queue.h>
+#include <asm/iseries/alpaca.h>
 
 #include "naca.h"
 #include "vpd_areas.h"
@@ -31,7 +31,7 @@
 /* The HvReleaseData is the root of the information shared between
  * the hypervisor and Linux.
  */
-struct HvReleaseData hvReleaseData = {
+const struct HvReleaseData hvReleaseData = {
 	.xDesc = 0xc8a5d9c4,	/* "HvRD" ebcdic */
 	.xSize = sizeof(struct HvReleaseData),
 	.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
@@ -61,6 +61,63 @@ struct naca_struct naca = {
 	.xRamDiskSize = 0,
 };
 
+struct ItLpRegSave {
+	u32	xDesc;		// Eye catcher  "LpRS" ebcdic	000-003
+	u16	xSize;		// Size of this class		004-005
+	u8	xInUse;         // Area is live                 006-007
+	u8	xRsvd1[9];	// Reserved			007-00F
+
+	u8      xFixedRegSave[352]; // Fixed Register Save Area 010-16F
+	u32	xCTRL;		// Control Register		170-173
+	u32	xDEC;		// Decrementer			174-177
+	u32	xFPSCR;		// FP Status and Control Reg	178-17B
+	u32	xPVR;		// Processor Version Number	17C-17F
+
+	u64	xMMCR0;		// Monitor Mode Control Reg 0	180-187
+	u32	xPMC1;		// Perf Monitor Counter 1	188-18B
+	u32	xPMC2;		// Perf Monitor Counter 2	18C-18F
+	u32	xPMC3;		// Perf Monitor Counter 3	190-193
+	u32	xPMC4;		// Perf Monitor Counter 4	194-197
+	u32	xPIR;		// Processor ID Reg		198-19B
+
+	u32	xMMCR1;		// Monitor Mode Control Reg 1	19C-19F
+	u32	xMMCRA;		// Monitor Mode Control Reg A	1A0-1A3
+	u32	xPMC5;		// Perf Monitor Counter 5	1A4-1A7
+	u32	xPMC6;		// Perf Monitor Counter 6	1A8-1AB
+	u32	xPMC7;		// Perf Monitor Counter 7	1AC-1AF
+	u32	xPMC8;		// Perf Monitor Counter 8	1B0-1B3
+	u32	xTSC;		// Thread Switch Control	1B4-1B7
+	u32	xTST;		// Thread Switch Timeout	1B8-1BB
+	u32	xRsvd;          // Reserved                     1BC-1BF
+
+	u64	xACCR;		// Address Compare Control Reg	1C0-1C7
+	u64	xIMR;		// Instruction Match Register	1C8-1CF
+	u64	xSDR1;		// Storage Description Reg 1	1D0-1D7
+	u64	xSPRG0;		// Special Purpose Reg General0	1D8-1DF
+	u64	xSPRG1;		// Special Purpose Reg General1	1E0-1E7
+	u64	xSPRG2;		// Special Purpose Reg General2	1E8-1EF
+	u64	xSPRG3;		// Special Purpose Reg General3	1F0-1F7
+	u64	xTB;		// Time Base Register		1F8-1FF
+
+	u64	xFPR[32];	// Floating Point Registers	200-2FF
+
+	u64	xMSR;		// Machine State Register	300-307
+	u64	xNIA;		// Next Instruction Address	308-30F
+
+	u64	xDABR;		// Data Address Breakpoint Reg	310-317
+	u64	xIABR;		// Inst Address Breakpoint Reg	318-31F
+
+	u64	xHID0;		// HW Implementation Dependent0	320-327
+
+	u64	xHID4;		// HW Implementation Dependent4	328-32F
+	u64	xSCOMd;		// SCON Data Reg (SPRG4)	330-337
+	u64	xSCOMc;		// SCON Command Reg (SPRG5)	338-33F
+	u64	xSDAR;		// Sample Data Address Register	340-347
+	u64	xSIAR;		// Sample Inst Address Register	348-34F
+
+	u8	xRsvd3[176];	// Reserved			350-3FF
+};
+
 extern void system_reset_iSeries(void);
 extern void machine_check_iSeries(void);
 extern void data_access_iSeries(void);
@@ -129,7 +186,7 @@ struct ItLpNaca itLpNaca = {
 };
 
 /* May be filled in by the hypervisor so cannot end up in the BSS */
-struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
+static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data")));
 
 /* May be filled in by the hypervisor so cannot end up in the BSS */
 struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data")));
@@ -152,13 +209,54 @@ u64    xMsVpd[3400] __attribute__((__section__(".data")));
 
 /* Space for Recovery Log Buffer */
 /* May be filled in by the hypervisor so cannot end up in the BSS */
-u64    xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
+static u64    xRecoveryLogBuffer[32] __attribute__((__section__(".data")));
 
-struct SpCommArea xSpCommArea = {
+static const struct SpCommArea xSpCommArea = {
 	.xDesc = 0xE2D7C3C2,
 	.xFormat = 1,
 };
 
+static const struct ItLpRegSave iseries_reg_save[] = {
+	[0 ... (NR_CPUS-1)] = {
+		.xDesc = 0xd397d9e2,	/* "LpRS" */
+		.xSize = sizeof(struct ItLpRegSave),
+	},
+};
+
+#define ALPACA_INIT(number)						\
+{									\
+	.lppaca_ptr = &lppaca[number],					\
+	.reg_save_ptr = &iseries_reg_save[number],			\
+}
+
+const struct alpaca alpaca[] = {
+	ALPACA_INIT( 0),
+#if NR_CPUS > 1
+	ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3),
+#if NR_CPUS > 4
+	ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7),
+#if NR_CPUS > 8
+	ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11),
+	ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15),
+	ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19),
+	ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23),
+	ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27),
+	ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31),
+#if NR_CPUS > 32
+	ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35),
+	ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39),
+	ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43),
+	ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47),
+	ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51),
+	ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55),
+	ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59),
+	ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63),
+#endif
+#endif
+#endif
+#endif
+};
+
 /* The LparMap data is now located at offset 0x6000 in head.S
  * It was put there so that the HvReleaseData could address it
  * with a 32-bit offset as required by the iSeries hypervisor
@@ -167,7 +265,7 @@ struct SpCommArea xSpCommArea = {
  * the Naca via the HvReleaseData area.  The HvReleaseData has the
  * offset into the Naca of the pointer to the ItVpdAreas.
  */
-struct ItVpdAreas itVpdAreas = {
+const struct ItVpdAreas itVpdAreas = {
 	.xSlicDesc = 0xc9a3e5c1,		/* "ItVA" */
 	.xSlicSize = sizeof(struct ItVpdAreas),
 	.xSlicVpdEntries = ItVpdMaxEntries,	/* # VPD array entries */
@@ -185,7 +283,7 @@ struct ItVpdAreas itVpdAreas = {
 	.xSlicVpdLens = {			/* VPD lengths */
 	        0,0,0,		        /*  0 - 2 */
 		sizeof(xItExtVpdPanel), /*       3 Extended VPD   */
-		sizeof(struct paca_struct),	/*       4 length of Paca  */
+		sizeof(struct alpaca),	/*       4 length of (fake) Paca  */
 		0,			/*       5 */
 		sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */
 		26992,			/*	 7 length of MS VPD */
@@ -203,7 +301,7 @@ struct ItVpdAreas itVpdAreas = {
 	.xSlicVpdAdrs = {			/* VPD addresses */
 		0,0,0,			/*	 0 -  2 */
 		&xItExtVpdPanel,        /*       3 Extended VPD */
-		&paca[0],		/*       4 first Paca */
+		&alpaca[0],		/*       4 first (fake) Paca */
 		0,			/*       5 */
 		&xItIplParmsReal,	/*	 6 IPL parms */
 		&xMsVpd,		/*	 7 MS Vpd */
@@ -219,10 +317,3 @@ struct ItVpdAreas itVpdAreas = {
 		0,0
 	}
 };
-
-struct ItLpRegSave iseries_reg_save[] = {
-	[0 ... (NR_CPUS-1)] = {
-		.xDesc = 0xd397d9e2,	/* "LpRS" */
-		.xSize = sizeof(struct ItLpRegSave),
-	},
-};
diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h
index ab2372eb8d2e..f01708e12862 100644
--- a/arch/powerpc/platforms/iseries/naca.h
+++ b/arch/powerpc/platforms/iseries/naca.h
@@ -14,7 +14,7 @@
 
 struct naca_struct {
 	/* Kernel only data - undefined for user space */
-	void *xItVpdAreas;              /* VPD Data                  0x00 */
+	const void *xItVpdAreas;	/* VPD Data                  0x00 */
 	void *xRamDisk;                 /* iSeries ramdisk           0x08 */
 	u64   xRamDiskSize;		/* In pages                  0x10 */
 };
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index cc562e4c2f32..02a634faedbe 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -23,6 +23,7 @@
 
 #undef DEBUG
 
+#include <linux/jiffies.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/string.h>
@@ -586,7 +587,7 @@ static inline struct device_node *xlate_iomm_address(
 		static unsigned long last_jiffies;
 		static int num_printed;
 
-		if ((jiffies - last_jiffies) > 60 * HZ) {
+		if (time_after(jiffies, last_jiffies + 60 * HZ)) {
 			last_jiffies = jiffies;
 			num_printed = 0;
 		}
diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h
index 66189fd2e32d..6ad7d843e8fc 100644
--- a/arch/powerpc/platforms/iseries/release_data.h
+++ b/arch/powerpc/platforms/iseries/release_data.h
@@ -58,6 +58,6 @@ struct HvReleaseData {
 	char	xRsvd3[20];	/* Reserved			x2C-x3F */
 };
 
-extern struct HvReleaseData	hvReleaseData;
+extern const struct HvReleaseData	hvReleaseData;
 
 #endif /* _ISERIES_RELEASE_DATA_H */
diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h
index 6e3b685115c9..598b7c14573a 100644
--- a/arch/powerpc/platforms/iseries/spcomm_area.h
+++ b/arch/powerpc/platforms/iseries/spcomm_area.h
@@ -31,6 +31,4 @@ struct SpCommArea {
 	u8	xRsvd2[80];		// Reserved				030-07F
 };
 
-extern struct SpCommArea xSpCommArea;
-
 #endif /* _ISERIES_SPCOMM_AREA_H */
diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h
index 601e6dd860ed..feb001f3a5fe 100644
--- a/arch/powerpc/platforms/iseries/vpd_areas.h
+++ b/arch/powerpc/platforms/iseries/vpd_areas.h
@@ -80,9 +80,9 @@ struct ItVpdAreas {
 	u32	xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths	080-0A7
 	u32	xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens	0A8-0CF
 	u32	xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths	0D0-12F
-	void	*xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers	130-1EF
+	const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF
 };
 
-extern struct ItVpdAreas	itVpdAreas;
+extern const struct ItVpdAreas	itVpdAreas;
 
 #endif /* _ISERIES_VPD_AREAS_H */
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 3ffa0ac170ee..301855263b81 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -592,50 +592,3 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
 	}
 	return irq;
 }
-
-/* XXX: To remove once all firmwares are ok */
-static void fixup_maple_ide(struct pci_dev* dev)
-{
-	if (!machine_is(maple))
-		return;
-
-#if 0 /* Enable this to enable IDE port 0 */
-	{
-		u8 v;
-
-		pci_read_config_byte(dev, 0x40, &v);
-		v |= 2;
-		pci_write_config_byte(dev, 0x40, v);
-	}
-#endif
-#if 0 /* fix bus master base */
-	pci_write_config_dword(dev, 0x20, 0xcc01);
-	printk("old ide resource: %lx -> %lx \n",
-	       dev->resource[4].start, dev->resource[4].end);
-	dev->resource[4].start = 0xcc00;
-	dev->resource[4].end = 0xcc10;
-#endif
-#if 0 /* Enable this to fixup IDE sense/polarity of irqs in IO-APICs */
-	{
-		struct pci_dev *apicdev;
-		u32 v;
-
-		apicdev = pci_get_slot (dev->bus, PCI_DEVFN(5,0));
-		if (apicdev == NULL)
-			printk("IDE Fixup IRQ: Can't find IO-APIC !\n");
-		else {
-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*14);
-			pci_read_config_dword(apicdev, 0xf4, &v);
-			v &= ~0x00000022;
-			pci_write_config_dword(apicdev, 0xf4, v);
-			pci_write_config_byte(apicdev, 0xf2, 0x10 + 2*15);
-			pci_read_config_dword(apicdev, 0xf4, &v);
-			v &= ~0x00000022;
-			pci_write_config_dword(apicdev, 0xf4, v);
-			pci_dev_put(apicdev);
-		}
-	}
-#endif
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_IDE,
-			 fixup_maple_ide);
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 3ce2d73b4177..364714757cf1 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -43,6 +43,7 @@
 #include <linux/smp.h>
 #include <linux/bitops.h>
 #include <linux/of_device.h>
+#include <linux/lmb.h>
 
 #include <asm/processor.h>
 #include <asm/sections.h>
@@ -57,7 +58,6 @@
 #include <asm/dma.h>
 #include <asm/cputable.h>
 #include <asm/time.h>
-#include <asm/lmb.h>
 #include <asm/mpic.h>
 #include <asm/rtas.h>
 #include <asm/udbg.h>
@@ -319,7 +319,7 @@ static int __init maple_probe(void)
 	return 1;
 }
 
-define_machine(maple_md) {
+define_machine(maple) {
 	.name			= "Maple",
 	.probe			= maple_probe,
 	.setup_arch		= maple_setup_arch,
diff --git a/arch/powerpc/platforms/pasemi/dma_lib.c b/arch/powerpc/platforms/pasemi/dma_lib.c
index c529d8dff395..217af321b0ca 100644
--- a/arch/powerpc/platforms/pasemi/dma_lib.c
+++ b/arch/powerpc/platforms/pasemi/dma_lib.c
@@ -17,6 +17,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -26,6 +27,8 @@
 
 #define MAX_TXCH 64
 #define MAX_RXCH 64
+#define MAX_FLAGS 64
+#define MAX_FUN 8
 
 static struct pasdma_status *dma_status;
 
@@ -43,6 +46,8 @@ static struct pci_dev *dma_pdev;
 
 static DECLARE_BITMAP(txch_free, MAX_TXCH);
 static DECLARE_BITMAP(rxch_free, MAX_RXCH);
+static DECLARE_BITMAP(flags_free, MAX_FLAGS);
+static DECLARE_BITMAP(fun_free, MAX_FUN);
 
 /* pasemi_read_iob_reg - read IOB register
  * @reg: Register to read (offset into PCI CFG space)
@@ -373,6 +378,106 @@ void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
 }
 EXPORT_SYMBOL(pasemi_dma_free_buf);
 
+/* pasemi_dma_alloc_flag - Allocate a flag (event) for channel syncronization
+ *
+ * Allocates a flag for use with channel syncronization (event descriptors).
+ * Returns allocated flag (0-63), < 0 on error.
+ */
+int pasemi_dma_alloc_flag(void)
+{
+	int bit;
+
+retry:
+	bit = find_next_bit(flags_free, MAX_FLAGS, 0);
+	if (bit >= MAX_FLAGS)
+		return -ENOSPC;
+	if (!test_and_clear_bit(bit, flags_free))
+		goto retry;
+
+	return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_flag);
+
+
+/* pasemi_dma_free_flag - Deallocates a flag (event)
+ * @flag: Flag number to deallocate
+ *
+ * Frees up a flag so it can be reused for other purposes.
+ */
+void pasemi_dma_free_flag(int flag)
+{
+	BUG_ON(test_bit(flag, flags_free));
+	BUG_ON(flag >= MAX_FLAGS);
+	set_bit(flag, flags_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_flag);
+
+
+/* pasemi_dma_set_flag - Sets a flag (event) to 1
+ * @flag: Flag number to set active
+ *
+ * Sets the flag provided to 1.
+ */
+void pasemi_dma_set_flag(int flag)
+{
+	BUG_ON(flag >= MAX_FLAGS);
+	if (flag < 32)
+		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG0, 1 << flag);
+	else
+		pasemi_write_dma_reg(PAS_DMA_TXF_SFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_set_flag);
+
+/* pasemi_dma_clear_flag - Sets a flag (event) to 0
+ * @flag: Flag number to set inactive
+ *
+ * Sets the flag provided to 0.
+ */
+void pasemi_dma_clear_flag(int flag)
+{
+	BUG_ON(flag >= MAX_FLAGS);
+	if (flag < 32)
+		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 1 << flag);
+	else
+		pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 1 << flag);
+}
+EXPORT_SYMBOL(pasemi_dma_clear_flag);
+
+/* pasemi_dma_alloc_fun - Allocate a function engine
+ *
+ * Allocates a function engine to use for crypto/checksum offload
+ * Returns allocated engine (0-8), < 0 on error.
+ */
+int pasemi_dma_alloc_fun(void)
+{
+	int bit;
+
+retry:
+	bit = find_next_bit(fun_free, MAX_FLAGS, 0);
+	if (bit >= MAX_FLAGS)
+		return -ENOSPC;
+	if (!test_and_clear_bit(bit, fun_free))
+		goto retry;
+
+	return bit;
+}
+EXPORT_SYMBOL(pasemi_dma_alloc_fun);
+
+
+/* pasemi_dma_free_fun - Deallocates a function engine
+ * @flag: Engine number to deallocate
+ *
+ * Frees up a function engine so it can be used for other purposes.
+ */
+void pasemi_dma_free_fun(int fun)
+{
+	BUG_ON(test_bit(fun, fun_free));
+	BUG_ON(fun >= MAX_FLAGS);
+	set_bit(fun, fun_free);
+}
+EXPORT_SYMBOL(pasemi_dma_free_fun);
+
+
 static void *map_onedev(struct pci_dev *p, int index)
 {
 	struct device_node *dn;
@@ -410,6 +515,7 @@ int pasemi_dma_init(void)
 	struct resource res;
 	struct device_node *dn;
 	int i, intf, err = 0;
+	unsigned long timeout;
 	u32 tmp;
 
 	if (!machine_is(pasemi))
@@ -478,6 +584,44 @@ int pasemi_dma_init(void)
 	for (i = 0; i < MAX_RXCH; i++)
 		__set_bit(i, rxch_free);
 
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_RXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable RX section\n");
+			break;
+		}
+	}
+
+	timeout = jiffies + HZ;
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, 0);
+	while (pasemi_read_dma_reg(PAS_DMA_COM_TXSTA) & 1) {
+		if (time_after(jiffies, timeout)) {
+			pr_warning("Warning: Could not disable TX section\n");
+			break;
+		}
+	}
+
+	/* setup resource allocations for the different DMA sections */
+	tmp = pasemi_read_dma_reg(PAS_DMA_COM_CFG);
+	pasemi_write_dma_reg(PAS_DMA_COM_CFG, tmp | 0x18000000);
+
+	/* enable tx section */
+	pasemi_write_dma_reg(PAS_DMA_COM_TXCMD, PAS_DMA_COM_TXCMD_EN);
+
+	/* enable rx section */
+	pasemi_write_dma_reg(PAS_DMA_COM_RXCMD, PAS_DMA_COM_RXCMD_EN);
+
+	for (i = 0; i < MAX_FLAGS; i++)
+		__set_bit(i, flags_free);
+
+	for (i = 0; i < MAX_FUN; i++)
+		__set_bit(i, fun_free);
+
+	/* clear all status flags */
+	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG0, 0xffffffff);
+	pasemi_write_dma_reg(PAS_DMA_TXF_CFLG1, 0xffffffff);
+
 	printk(KERN_INFO "PA Semi PWRficient DMA library initialized "
 		"(%d tx, %d rx channels)\n", num_txch, num_rxch);
 
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
index b46542990cf8..ab6955412ba4 100644
--- a/arch/powerpc/platforms/pasemi/gpio_mdio.c
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -241,7 +241,7 @@ static int __devinit gpio_mdio_probe(struct of_device *ofdev,
 	new_bus->reset = &gpio_mdio_reset;
 
 	prop = of_get_property(np, "reg", NULL);
-	new_bus->id = *prop;
+	snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", *prop);
 	new_bus->priv = priv;
 
 	new_bus->phy_mask = 0;
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 5803f11c77fc..86967bdd8774 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2005-2007, PA Semi, Inc
+ * Copyright (C) 2005-2008, PA Semi, Inc
  *
  * Maintained by: Olof Johansson <olof@lixom.net>
  *
@@ -27,7 +27,6 @@
 #include <asm/abs_addr.h>
 #include <asm/firmware.h>
 
-
 #define IOBMAP_PAGE_SHIFT	12
 #define IOBMAP_PAGE_SIZE	(1 << IOBMAP_PAGE_SHIFT)
 #define IOBMAP_PAGE_MASK	(IOBMAP_PAGE_SIZE - 1)
@@ -35,13 +34,13 @@
 #define IOB_BASE		0xe0000000
 #define IOB_SIZE		0x3000
 /* Configuration registers */
-#define IOBCAP_REG		0x10
-#define IOBCOM_REG		0x40
+#define IOBCAP_REG		0x40
+#define IOBCOM_REG		0x100
 /* Enable IOB address translation */
 #define IOBCOM_ATEN		0x00000100
 
 /* Address decode configuration register */
-#define IOB_AD_REG		0x53
+#define IOB_AD_REG		0x14c
 /* IOBCOM_AD_REG fields */
 #define IOB_AD_VGPRT		0x00000e00
 #define IOB_AD_VGAEN		0x00000100
@@ -56,13 +55,13 @@
 #define IOB_AD_TRNG_2G		0x00000001
 #define IOB_AD_TRNG_128G	0x00000003
 
-#define IOB_TABLEBASE_REG	0x55
+#define IOB_TABLEBASE_REG	0x154
 
 /* Base of the 64 4-byte L1 registers */
-#define IOB_XLT_L1_REGBASE	0xac0
+#define IOB_XLT_L1_REGBASE	0x2b00
 
 /* Register to invalidate TLB entries */
-#define IOB_AT_INVAL_TLB_REG	0xb40
+#define IOB_AT_INVAL_TLB_REG	0x2d00
 
 /* The top two bits of the level 1 entry contains valid and type flags */
 #define IOBMAP_L1E_V		0x40000000
@@ -76,7 +75,7 @@
 #define IOBMAP_L2E_V		0x80000000
 #define IOBMAP_L2E_V_CACHED	0xc0000000
 
-static u32 __iomem *iob;
+static void __iomem *iob;
 static u32 iob_l1_emptyval;
 static u32 iob_l2_emptyval;
 static u32 *iob_l2_base;
@@ -219,7 +218,7 @@ int __init iob_init(struct device_node *dn)
 	for (i = 0; i < 64; i++) {
 		/* Each L1 covers 32MB, i.e. 8K entries = 32K of ram */
 		regword = IOBMAP_L1E_V | (__pa(iob_l2_base + i*0x2000) >> 12);
-		out_le32(iob+IOB_XLT_L1_REGBASE+i, regword);
+		out_le32(iob+IOB_XLT_L1_REGBASE+i*4, regword);
 	}
 
 	/* set 2GB translation window, based at 0 */
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 1c58db9d42cb..bcf50d7056e9 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -1144,28 +1144,6 @@ void __init pmac_pcibios_after_init(void)
 {
 	struct device_node* nd;
 
-#ifdef CONFIG_BLK_DEV_IDE
-	struct pci_dev *dev = NULL;
-
-	/* OF fails to initialize IDE controllers on macs
-	 * (and maybe other machines)
-	 *
-	 * Ideally, this should be moved to the IDE layer, but we need
-	 * to check specifically with Andre Hedrick how to do it cleanly
-	 * since the common IDE code seem to care about the fact that the
-	 * BIOS may have disabled a controller.
-	 *
-	 * -- BenH
-	 */
-	for_each_pci_dev(dev) {
-		if ((dev->class >> 16) != PCI_BASE_CLASS_STORAGE)
-			continue;
-		if (pci_enable_device(dev))
-			printk(KERN_WARNING
-			       "pci: Failed to enable %s\n", pci_name(dev));
-	}
-#endif /* CONFIG_BLK_DEV_IDE */
-
 	for_each_node_by_name(nd, "firewire") {
 		if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
 				   of_device_is_compatible(nd, "pci106b,30") ||
diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c
index 85434231ae14..96d5ce50364e 100644
--- a/arch/powerpc/platforms/powermac/pfunc_core.c
+++ b/arch/powerpc/platforms/powermac/pfunc_core.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 
-#include <asm/semaphore.h>
 #include <asm/prom.h>
 #include <asm/pmac_pfunc.h>
 
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 40736400ef80..829b8b02527b 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -618,9 +618,9 @@ static int pmacpic_find_viaint(void)
 	if (np == NULL)
 		goto not_found;
 	viaint = irq_of_parse_and_map(np, 0);;
-#endif /* CONFIG_ADB_PMU */
 
 not_found:
+#endif /* CONFIG_ADB_PMU */
 	return viaint;
 }
 
diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h
index b3abaaf61eb4..3362e781b6a7 100644
--- a/arch/powerpc/platforms/powermac/pmac.h
+++ b/arch/powerpc/platforms/powermac/pmac.h
@@ -2,7 +2,6 @@
 #define __PMAC_H__
 
 #include <linux/pci.h>
-#include <linux/ide.h>
 #include <linux/irq.h>
 
 /*
@@ -35,10 +34,6 @@ extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
 
-extern unsigned long pmac_ide_get_base(int index);
-extern void pmac_ide_init_hwif_ports(hw_regs_t *hw,
-	unsigned long data_port, unsigned long ctrl_port, int *irq);
-
 extern int pmac_nvram_init(void);
 extern void pmac_pic_init(void);
 
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 36ff1b6b7fac..bf44c5441a36 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -53,6 +53,7 @@
 #include <linux/suspend.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
+#include <linux/lmb.h>
 
 #include <asm/reg.h>
 #include <asm/sections.h>
@@ -74,7 +75,6 @@
 #include <asm/iommu.h>
 #include <asm/smu.h>
 #include <asm/pmc.h>
-#include <asm/lmb.h>
 #include <asm/udbg.h>
 
 #include "pmac.h"
@@ -574,14 +574,6 @@ static int __init pmac_probe(void)
 	ISA_DMA_THRESHOLD = ~0L;
 	DMA_MODE_READ = 1;
 	DMA_MODE_WRITE = 2;
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-#ifdef CONFIG_BLK_DEV_IDE_PMAC
-        ppc_ide_md.ide_init_hwif	= pmac_ide_init_hwif_ports;
-        ppc_ide_md.default_io_base	= pmac_ide_get_base;
-#endif /* CONFIG_BLK_DEV_IDE_PMAC */
-#endif /* defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) */
-
 #endif /* CONFIG_PPC32 */
 
 #ifdef CONFIG_PMAC_SMU
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 9d251d0ca8c6..3866debfa3c4 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -499,41 +499,14 @@ static int __init ps3_register_graphics_devices(void)
 }
 
 /**
- * ps3_register_repository_device - Register a device from the repositiory info.
- *
+ * ps3_setup_dynamic_device - Setup a dynamic device from the repository
  */
 
-static int ps3_register_repository_device(
-	const struct ps3_repository_device *repo)
+static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo)
 {
 	int result;
 
 	switch (repo->dev_type) {
-	case PS3_DEV_TYPE_SB_GELIC:
-		result = ps3_setup_gelic_device(repo);
-		if (result) {
-			pr_debug("%s:%d ps3_setup_gelic_device failed\n",
-				__func__, __LINE__);
-		}
-		break;
-	case PS3_DEV_TYPE_SB_USB:
-
-		/* Each USB device has both an EHCI and an OHCI HC */
-
-		result = ps3_setup_ehci_device(repo);
-
-		if (result) {
-			pr_debug("%s:%d ps3_setup_ehci_device failed\n",
-				__func__, __LINE__);
-		}
-
-		result = ps3_setup_ohci_device(repo);
-
-		if (result) {
-			pr_debug("%s:%d ps3_setup_ohci_device failed\n",
-				__func__, __LINE__);
-		}
-		break;
 	case PS3_DEV_TYPE_STOR_DISK:
 		result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
 
@@ -572,6 +545,48 @@ static int ps3_register_repository_device(
 	return result;
 }
 
+/**
+ * ps3_setup_static_device - Setup a static device from the repository
+ */
+
+static int __init ps3_setup_static_device(const struct ps3_repository_device *repo)
+{
+	int result;
+
+	switch (repo->dev_type) {
+	case PS3_DEV_TYPE_SB_GELIC:
+		result = ps3_setup_gelic_device(repo);
+		if (result) {
+			pr_debug("%s:%d ps3_setup_gelic_device failed\n",
+				__func__, __LINE__);
+		}
+		break;
+	case PS3_DEV_TYPE_SB_USB:
+
+		/* Each USB device has both an EHCI and an OHCI HC */
+
+		result = ps3_setup_ehci_device(repo);
+
+		if (result) {
+			pr_debug("%s:%d ps3_setup_ehci_device failed\n",
+				__func__, __LINE__);
+		}
+
+		result = ps3_setup_ohci_device(repo);
+
+		if (result) {
+			pr_debug("%s:%d ps3_setup_ohci_device failed\n",
+				__func__, __LINE__);
+		}
+		break;
+
+	default:
+		return ps3_setup_dynamic_device(repo);
+	}
+
+	return result;
+}
+
 static void ps3_find_and_add_device(u64 bus_id, u64 dev_id)
 {
 	struct ps3_repository_device repo;
@@ -601,7 +616,7 @@ found:
 		pr_debug("%s:%u: device %lu:%lu found after %u retries\n",
 			 __func__, __LINE__, bus_id, dev_id, retries);
 
-	ps3_register_repository_device(&repo);
+	ps3_setup_dynamic_device(&repo);
 	return;
 }
 
@@ -905,8 +920,7 @@ static int __init ps3_register_devices(void)
 
 	ps3_register_graphics_devices();
 
-	ps3_repository_find_devices(PS3_BUS_TYPE_SB,
-		ps3_register_repository_device);
+	ps3_repository_find_devices(PS3_BUS_TYPE_SB, ps3_setup_static_device);
 
 	ps3_register_sound_devices();
 
diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 7382f195c4f8..1cf901fa9031 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -19,9 +19,10 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/lmb.h>
 
 #include <asm/machdep.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 #include <asm/ps3fb.h>
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index 3a6db04aa940..a14e5cdc2fed 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -709,7 +709,7 @@ static unsigned int ps3_get_irq(void)
 	asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
 	plug &= 0x3f;
 
-	if (unlikely(plug) == NO_IRQ) {
+	if (unlikely(plug == NO_IRQ)) {
 		pr_debug("%s:%d: no plug found: thread_id %lu\n", __func__,
 			__LINE__, pd->thread_id);
 		dump_bmp(&per_cpu(ps3_private, 0));
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 68900476c842..5b3fb2b321ab 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -21,9 +21,10 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/memory_hotplug.h>
+#include <linux/lmb.h>
 
 #include <asm/firmware.h>
-#include <asm/lmb.h>
+#include <asm/prom.h>
 #include <asm/udbg.h>
 #include <asm/lv1call.h>
 
diff --git a/arch/powerpc/platforms/ps3/os-area.c b/arch/powerpc/platforms/ps3/os-area.c
index b9ea09d9d2fb..c73379ec9141 100644
--- a/arch/powerpc/platforms/ps3/os-area.c
+++ b/arch/powerpc/platforms/ps3/os-area.c
@@ -24,8 +24,9 @@
 #include <linux/fs.h>
 #include <linux/syscalls.h>
 #include <linux/ctype.h>
+#include <linux/lmb.h>
 
-#include <asm/lmb.h>
+#include <asm/prom.h>
 
 #include "platform.h"
 
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 5c2cbb08eb52..a413abbd4123 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -95,6 +95,14 @@ static void ps3_power_off(void)
 	ps3_sys_manager_power_off(); /* never returns */
 }
 
+static void ps3_halt(void)
+{
+	DBG("%s:%d\n", __func__, __LINE__);
+
+	smp_send_stop();
+	ps3_sys_manager_halt(); /* never returns */
+}
+
 static void ps3_panic(char *str)
 {
 	DBG("%s:%d %s\n", __func__, __LINE__, str);
@@ -105,7 +113,8 @@ static void ps3_panic(char *str)
 	printk("   Please press POWER button.\n");
 	printk("\n");
 
-	while(1);
+	while(1)
+		lv1_pause(1);
 }
 
 #if defined(CONFIG_FB_PS3) || defined(CONFIG_FB_PS3_MODULE) || \
@@ -117,7 +126,7 @@ static void __init prealloc(struct ps3_prealloc *p)
 
 	p->address = __alloc_bootmem(p->size, p->align, __pa(MAX_DMA_ADDRESS));
 	if (!p->address) {
-		printk(KERN_ERR "%s: Cannot allocate %s\n", __FUNCTION__,
+		printk(KERN_ERR "%s: Cannot allocate %s\n", __func__,
 		       p->name);
 		return;
 	}
@@ -266,6 +275,7 @@ define_machine(ps3) {
 	.progress			= ps3_progress,
 	.restart			= ps3_restart,
 	.power_off			= ps3_power_off,
+	.halt				= ps3_halt,
 #if defined(CONFIG_KEXEC)
 	.kexec_cpu_down			= ps3_kexec_cpu_down,
 	.machine_kexec			= default_machine_kexec,
diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index 5ad41189b494..d135cef9ed6a 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -27,6 +27,7 @@
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
 #include <asm/lv1call.h>
+#include <asm/ps3.h>
 
 #include "../cell/spufs/spufs.h"
 #include "platform.h"
@@ -140,6 +141,12 @@ static void _dump_areas(unsigned int spe_id, unsigned long priv2,
 	pr_debug("%s:%d: shadow:  %lxh\n", func, line, shadow);
 }
 
+inline u64 ps3_get_spe_id(void *arg)
+{
+	return spu_pdata(arg)->spe_id;
+}
+EXPORT_SYMBOL_GPL(ps3_get_spe_id);
+
 static unsigned long get_vas_id(void)
 {
 	unsigned long id;
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 992ba6753cf2..bdae04bb7a01 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu.o
 obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
+obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 9eb539ee5f9a..550b2f7d2cc1 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -945,7 +945,6 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 	unsigned int rets[3];
 	struct eeh_early_enable_info *info = data;
 	int ret;
-	const char *status = of_get_property(dn, "status", NULL);
 	const u32 *class_code = of_get_property(dn, "class-code", NULL);
 	const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
 	const u32 *device_id = of_get_property(dn, "device-id", NULL);
@@ -959,8 +958,8 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
 	pdn->eeh_freeze_count = 0;
 	pdn->eeh_false_positives = 0;
 
-	if (status && strncmp(status, "ok", 2) != 0)
-		return NULL;	/* ignore devices with bad status */
+	if (!of_device_is_available(dn))
+		return NULL;
 
 	/* Ignore bad nodes. */
 	if (!class_code || !vendor_id || !device_id)
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 9a455d46379d..9235c469449e 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -40,6 +40,7 @@
 #include <asm/smp.h>
 
 #include "plpar_wrappers.h"
+#include "pseries.h"
 
 #ifdef DEBUG_LOW
 #define DBG_LOW(fmt...) do { udbg_printf(fmt); } while(0)
@@ -203,7 +204,6 @@ void __init find_udbg_vterm(void)
 	struct device_node *stdout_node;
 	const u32 *termno;
 	const char *name;
-	int add_console;
 
 	/* find the boot console from /chosen/stdout */
 	if (!of_chosen)
@@ -219,8 +219,6 @@ void __init find_udbg_vterm(void)
 		printk(KERN_WARNING "stdout node missing 'name' property!\n");
 		goto out;
 	}
-	/* The user has requested a console so this is already set up. */
-	add_console = !strstr(cmd_line, "console=");
 
 	/* Check if it's a virtual terminal */
 	if (strncmp(name, "vty", 3) != 0)
@@ -234,15 +232,13 @@ void __init find_udbg_vterm(void)
 		udbg_putc = udbg_putcLP;
 		udbg_getc = udbg_getcLP;
 		udbg_getc_poll = udbg_getc_pollLP;
-		if (add_console)
-			add_preferred_console("hvc", termno[0] & 0xff, NULL);
+		add_preferred_console("hvc", termno[0] & 0xff, NULL);
 	} else if (of_device_is_compatible(stdout_node, "hvterm-protocol")) {
 		vtermno = termno[0];
 		udbg_putc = udbg_hvsi_putc;
 		udbg_getc = udbg_hvsi_getc;
 		udbg_getc_poll = udbg_hvsi_getc_poll;
-		if (add_console)
-			add_preferred_console("hvsi", termno[0] & 0xff, NULL);
+		add_preferred_console("hvsi", termno[0] & 0xff, NULL);
 	}
 out:
 	of_node_put(stdout_node);
@@ -520,6 +516,20 @@ static void pSeries_lpar_hpte_invalidate(unsigned long slot, unsigned long va,
 	BUG_ON(lpar_rc != H_SUCCESS);
 }
 
+static void pSeries_lpar_hpte_removebolted(unsigned long ea,
+					   int psize, int ssize)
+{
+	unsigned long slot, vsid, va;
+
+	vsid = get_kernel_vsid(ea, ssize);
+	va = hpt_va(ea, vsid, ssize);
+
+	slot = pSeries_lpar_hpte_find(va, psize, ssize);
+	BUG_ON(slot == -1);
+
+	pSeries_lpar_hpte_invalidate(slot, va, psize, ssize, 0);
+}
+
 /* Flag bits for H_BULK_REMOVE */
 #define HBR_REQUEST	0x4000000000000000UL
 #define HBR_RESPONSE	0x8000000000000000UL
@@ -597,6 +607,7 @@ void __init hpte_init_lpar(void)
 	ppc_md.hpte_updateboltedpp = pSeries_lpar_hpte_updateboltedpp;
 	ppc_md.hpte_insert	= pSeries_lpar_hpte_insert;
 	ppc_md.hpte_remove	= pSeries_lpar_hpte_remove;
+	ppc_md.hpte_removebolted = pSeries_lpar_hpte_removebolted;
 	ppc_md.flush_hash_range	= pSeries_lpar_flush_hash_range;
 	ppc_md.hpte_clear_all   = pSeries_lpar_hptab_clear;
 }
diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c
index 5a5a19e40bb4..21a6d55418f1 100644
--- a/arch/powerpc/platforms/pseries/pci_dlpar.c
+++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
@@ -88,11 +88,8 @@ pcibios_fixup_new_pci_devices(struct pci_bus *bus)
 	struct pci_dev *dev;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
-		/*
-		 * Skip already-present devices (which are on the
-		 * global device list.)
-		 */
-		if (list_empty(&dev->global_list)) {
+		/* Skip already-added devices */
+		if (!dev->is_added) {
 			int i;
 
 			/* Fill device archdata and setup iommu table */
@@ -123,7 +120,7 @@ pcibios_pci_config_bridge(struct pci_dev *dev)
 	/* Add to children of PCI bridge dev->bus */
 	child_bus = pci_add_new_bus(dev->bus, dev, sec_busno);
 	if (!child_bus) {
-		printk (KERN_ERR "%s: could not add second bus\n", __FUNCTION__);
+		printk (KERN_ERR "%s: could not add second bus\n", __func__);
 		return -EIO;
 	}
 	sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number);
diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c
new file mode 100644
index 000000000000..edbc012c2ebc
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/phyp_dump.c
@@ -0,0 +1,507 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/pfn.h>
+#include <linux/swap.h>
+#include <linux/sysfs.h>
+
+#include <asm/page.h>
+#include <asm/phyp_dump.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+
+/* Variables, used to communicate data between early boot and late boot */
+static struct phyp_dump phyp_dump_vars;
+struct phyp_dump *phyp_dump_info = &phyp_dump_vars;
+
+static int ibm_configure_kernel_dump;
+/* ------------------------------------------------- */
+/* RTAS interfaces to declare the dump regions */
+
+struct dump_section {
+	u32 dump_flags;
+	u16 source_type;
+	u16 error_flags;
+	u64 source_address;
+	u64 source_length;
+	u64 length_copied;
+	u64 destination_address;
+};
+
+struct phyp_dump_header {
+	u32 version;
+	u16 num_of_sections;
+	u16 status;
+
+	u32 first_offset_section;
+	u32 dump_disk_section;
+	u64 block_num_dd;
+	u64 num_of_blocks_dd;
+	u32 offset_dd;
+	u32 maxtime_to_auto;
+	/* No dump disk path string used */
+
+	struct dump_section cpu_data;
+	struct dump_section hpte_data;
+	struct dump_section kernel_data;
+};
+
+/* The dump header *must be* in low memory, so .bss it */
+static struct phyp_dump_header phdr;
+
+#define NUM_DUMP_SECTIONS	3
+#define DUMP_HEADER_VERSION	0x1
+#define DUMP_REQUEST_FLAG	0x1
+#define DUMP_SOURCE_CPU		0x0001
+#define DUMP_SOURCE_HPTE	0x0002
+#define DUMP_SOURCE_RMO		0x0011
+#define DUMP_ERROR_FLAG		0x2000
+#define DUMP_TRIGGERED		0x4000
+#define DUMP_PERFORMED		0x8000
+
+
+/**
+ * init_dump_header() - initialize the header declaring a dump
+ * Returns: length of dump save area.
+ *
+ * When the hypervisor saves crashed state, it needs to put
+ * it somewhere. The dump header tells the hypervisor where
+ * the data can be saved.
+ */
+static unsigned long init_dump_header(struct phyp_dump_header *ph)
+{
+	unsigned long addr_offset = 0;
+
+	/* Set up the dump header */
+	ph->version = DUMP_HEADER_VERSION;
+	ph->num_of_sections = NUM_DUMP_SECTIONS;
+	ph->status = 0;
+
+	ph->first_offset_section =
+		(u32)offsetof(struct phyp_dump_header, cpu_data);
+	ph->dump_disk_section = 0;
+	ph->block_num_dd = 0;
+	ph->num_of_blocks_dd = 0;
+	ph->offset_dd = 0;
+
+	ph->maxtime_to_auto = 0; /* disabled */
+
+	/* The first two sections are mandatory */
+	ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->cpu_data.source_type = DUMP_SOURCE_CPU;
+	ph->cpu_data.source_address = 0;
+	ph->cpu_data.source_length = phyp_dump_info->cpu_state_size;
+	ph->cpu_data.destination_address = addr_offset;
+	addr_offset += phyp_dump_info->cpu_state_size;
+
+	ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->hpte_data.source_type = DUMP_SOURCE_HPTE;
+	ph->hpte_data.source_address = 0;
+	ph->hpte_data.source_length = phyp_dump_info->hpte_region_size;
+	ph->hpte_data.destination_address = addr_offset;
+	addr_offset += phyp_dump_info->hpte_region_size;
+
+	/* This section describes the low kernel region */
+	ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG;
+	ph->kernel_data.source_type = DUMP_SOURCE_RMO;
+	ph->kernel_data.source_address = PHYP_DUMP_RMR_START;
+	ph->kernel_data.source_length = PHYP_DUMP_RMR_END;
+	ph->kernel_data.destination_address = addr_offset;
+	addr_offset += ph->kernel_data.source_length;
+
+	return addr_offset;
+}
+
+static void print_dump_header(const struct phyp_dump_header *ph)
+{
+#ifdef DEBUG
+	printk(KERN_INFO "dump header:\n");
+	/* setup some ph->sections required */
+	printk(KERN_INFO "version = %d\n", ph->version);
+	printk(KERN_INFO "Sections = %d\n", ph->num_of_sections);
+	printk(KERN_INFO "Status = 0x%x\n", ph->status);
+
+	/* No ph->disk, so all should be set to 0 */
+	printk(KERN_INFO "Offset to first section 0x%x\n",
+		ph->first_offset_section);
+	printk(KERN_INFO "dump disk sections should be zero\n");
+	printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section);
+	printk(KERN_INFO "block num = %ld\n", ph->block_num_dd);
+	printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd);
+	printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd);
+	printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto);
+
+	/*set cpu state and hpte states as well scratch pad area */
+	printk(KERN_INFO " CPU AREA \n");
+	printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags);
+	printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type);
+	printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags);
+	printk(KERN_INFO "cpu source_address =%lx\n",
+		ph->cpu_data.source_address);
+	printk(KERN_INFO "cpu source_length =%lx\n",
+		ph->cpu_data.source_length);
+	printk(KERN_INFO "cpu length_copied =%lx\n",
+		ph->cpu_data.length_copied);
+
+	printk(KERN_INFO " HPTE AREA \n");
+	printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags);
+	printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type);
+	printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags);
+	printk(KERN_INFO "HPTE source_address =%lx\n",
+		ph->hpte_data.source_address);
+	printk(KERN_INFO "HPTE source_length =%lx\n",
+		ph->hpte_data.source_length);
+	printk(KERN_INFO "HPTE length_copied =%lx\n",
+		ph->hpte_data.length_copied);
+
+	printk(KERN_INFO " SRSD AREA \n");
+	printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags);
+	printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type);
+	printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags);
+	printk(KERN_INFO "SRSD source_address =%lx\n",
+		ph->kernel_data.source_address);
+	printk(KERN_INFO "SRSD source_length =%lx\n",
+		ph->kernel_data.source_length);
+	printk(KERN_INFO "SRSD length_copied =%lx\n",
+		ph->kernel_data.length_copied);
+#endif
+}
+
+static ssize_t show_phyp_dump_active(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+
+	/* create filesystem entry so kdump is phyp-dump aware */
+	return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot);
+}
+
+static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600,
+					show_phyp_dump_active,
+					NULL);
+
+static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr)
+{
+	int rc;
+
+	/* Add addr value if not initialized before */
+	if (ph->cpu_data.destination_address == 0) {
+		ph->cpu_data.destination_address += addr;
+		ph->hpte_data.destination_address += addr;
+		ph->kernel_data.destination_address += addr;
+	}
+
+	/* ToDo Invalidate kdump and free memory range. */
+
+	do {
+		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+				1, ph, sizeof(struct phyp_dump_header));
+	} while (rtas_busy_delay(rc));
+
+	if (rc) {
+		printk(KERN_ERR "phyp-dump: unexpected error (%d) on "
+						"register\n", rc);
+		print_dump_header(ph);
+		return;
+	}
+
+	rc = sysfs_create_file(kernel_kobj, &pdl.attr);
+	if (rc)
+		printk(KERN_ERR "phyp-dump: unable to create sysfs"
+				" file (%d)\n", rc);
+}
+
+static
+void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr)
+{
+	int rc;
+
+	/* Add addr value if not initialized before */
+	if (ph->cpu_data.destination_address == 0) {
+		ph->cpu_data.destination_address += addr;
+		ph->hpte_data.destination_address += addr;
+		ph->kernel_data.destination_address += addr;
+	}
+
+	do {
+		rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL,
+				2, ph, sizeof(struct phyp_dump_header));
+	} while (rtas_busy_delay(rc));
+
+	if (rc) {
+		printk(KERN_ERR "phyp-dump: unexpected error (%d) "
+						"on invalidate\n", rc);
+		print_dump_header(ph);
+	}
+}
+
+/* ------------------------------------------------- */
+/**
+ * release_memory_range -- release memory previously lmb_reserved
+ * @start_pfn: starting physical frame number
+ * @nr_pages: number of pages to free.
+ *
+ * This routine will release memory that had been previously
+ * lmb_reserved in early boot. The released memory becomes
+ * available for genreal use.
+ */
+static void release_memory_range(unsigned long start_pfn,
+			unsigned long nr_pages)
+{
+	struct page *rpage;
+	unsigned long end_pfn;
+	long i;
+
+	end_pfn = start_pfn + nr_pages;
+
+	for (i = start_pfn; i <= end_pfn; i++) {
+		rpage = pfn_to_page(i);
+		if (PageReserved(rpage)) {
+			ClearPageReserved(rpage);
+			init_page_count(rpage);
+			__free_page(rpage);
+			totalram_pages++;
+		}
+	}
+}
+
+/**
+ * track_freed_range -- Counts the range being freed.
+ * Once the counter goes to zero, it re-registers dump for
+ * future use.
+ */
+static void
+track_freed_range(unsigned long addr, unsigned long length)
+{
+	static unsigned long scratch_area_size, reserved_area_size;
+
+	if (addr < phyp_dump_info->init_reserve_start)
+		return;
+
+	if ((addr >= phyp_dump_info->init_reserve_start) &&
+	    (addr <= phyp_dump_info->init_reserve_start +
+	     phyp_dump_info->init_reserve_size))
+		reserved_area_size += length;
+
+	if ((addr >= phyp_dump_info->reserved_scratch_addr) &&
+	    (addr <= phyp_dump_info->reserved_scratch_addr +
+	     phyp_dump_info->reserved_scratch_size))
+		scratch_area_size += length;
+
+	if ((reserved_area_size == phyp_dump_info->init_reserve_size) &&
+	    (scratch_area_size == phyp_dump_info->reserved_scratch_size)) {
+
+		invalidate_last_dump(&phdr,
+				phyp_dump_info->reserved_scratch_addr);
+		register_dump_area(&phdr,
+				phyp_dump_info->reserved_scratch_addr);
+	}
+}
+
+/* ------------------------------------------------- */
+/**
+ * sysfs_release_region -- sysfs interface to release memory range.
+ *
+ * Usage:
+ *   "echo <start addr> <length> > /sys/kernel/release_region"
+ *
+ * Example:
+ *   "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
+ *
+ * will release 256MB starting at 1GB.
+ */
+static ssize_t store_release_region(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				const char *buf, size_t count)
+{
+	unsigned long start_addr, length, end_addr;
+	unsigned long start_pfn, nr_pages;
+	ssize_t ret;
+
+	ret = sscanf(buf, "%lx %lx", &start_addr, &length);
+	if (ret != 2)
+		return -EINVAL;
+
+	track_freed_range(start_addr, length);
+
+	/* Range-check - don't free any reserved memory that
+	 * wasn't reserved for phyp-dump */
+	if (start_addr < phyp_dump_info->init_reserve_start)
+		start_addr = phyp_dump_info->init_reserve_start;
+
+	end_addr = phyp_dump_info->init_reserve_start +
+			phyp_dump_info->init_reserve_size;
+	if (start_addr+length > end_addr)
+		length = end_addr - start_addr;
+
+	/* Release the region of memory assed in by user */
+	start_pfn = PFN_DOWN(start_addr);
+	nr_pages = PFN_DOWN(length);
+	release_memory_range(start_pfn, nr_pages);
+
+	return count;
+}
+
+static ssize_t show_release_region(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	u64 second_addr_range;
+
+	/* total reserved size - start of scratch area */
+	second_addr_range = phyp_dump_info->init_reserve_size -
+				phyp_dump_info->reserved_scratch_size;
+	return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:"
+			    " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n",
+		phdr.cpu_data.destination_address,
+		phdr.cpu_data.length_copied,
+		phdr.hpte_data.destination_address,
+		phdr.hpte_data.length_copied,
+		phdr.kernel_data.destination_address,
+		phdr.kernel_data.length_copied,
+		phyp_dump_info->init_reserve_start,
+		second_addr_range);
+}
+
+static struct kobj_attribute rr = __ATTR(release_region, 0600,
+					show_release_region,
+					store_release_region);
+
+static int __init phyp_dump_setup(void)
+{
+	struct device_node *rtas;
+	const struct phyp_dump_header *dump_header = NULL;
+	unsigned long dump_area_start;
+	unsigned long dump_area_length;
+	int header_len = 0;
+	int rc;
+
+	/* If no memory was reserved in early boot, there is nothing to do */
+	if (phyp_dump_info->init_reserve_size == 0)
+		return 0;
+
+	/* Return if phyp dump not supported */
+	if (!phyp_dump_info->phyp_dump_configured)
+		return -ENOSYS;
+
+	/* Is there dump data waiting for us? If there isn't,
+	 * then register a new dump area, and release all of
+	 * the rest of the reserved ram.
+	 *
+	 * The /rtas/ibm,kernel-dump rtas node is present only
+	 * if there is dump data waiting for us.
+	 */
+	rtas = of_find_node_by_path("/rtas");
+	if (rtas) {
+		dump_header = of_get_property(rtas, "ibm,kernel-dump",
+						&header_len);
+		of_node_put(rtas);
+	}
+
+	print_dump_header(dump_header);
+	dump_area_length = init_dump_header(&phdr);
+	/* align down */
+	dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK;
+
+	if (dump_header == NULL) {
+		register_dump_area(&phdr, dump_area_start);
+		return 0;
+	}
+
+	/* re-register the dump area, if old dump was invalid */
+	if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) {
+		invalidate_last_dump(&phdr, dump_area_start);
+		register_dump_area(&phdr, dump_area_start);
+		return 0;
+	}
+
+	if (dump_header) {
+		phyp_dump_info->reserved_scratch_addr =
+				dump_header->cpu_data.destination_address;
+		phyp_dump_info->reserved_scratch_size =
+				dump_header->cpu_data.source_length +
+				dump_header->hpte_data.source_length +
+				dump_header->kernel_data.source_length;
+	}
+
+	/* Should we create a dump_subsys, analogous to s390/ipl.c ? */
+	rc = sysfs_create_file(kernel_kobj, &rr.attr);
+	if (rc)
+		printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n",
+									rc);
+
+	/* ToDo: re-register the dump area, for next time. */
+	return 0;
+}
+machine_subsys_initcall(pseries, phyp_dump_setup);
+
+int __init early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data)
+{
+	const unsigned int *sizes;
+
+	phyp_dump_info->phyp_dump_configured = 0;
+	phyp_dump_info->phyp_dump_is_active = 0;
+
+	if (depth != 1 || strcmp(uname, "rtas") != 0)
+		return 0;
+
+	if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL))
+		phyp_dump_info->phyp_dump_configured++;
+
+	if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL))
+		phyp_dump_info->phyp_dump_is_active++;
+
+	sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes",
+				    NULL);
+	if (!sizes)
+		return 0;
+
+	if (sizes[0] == 1)
+		phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]);
+
+	if (sizes[3] == 2)
+		phyp_dump_info->hpte_region_size =
+						*((unsigned long *)&sizes[4]);
+	return 1;
+}
+
+/* Look for phyp_dump= cmdline option */
+static int __init early_phyp_dump_enabled(char *p)
+{
+	phyp_dump_info->phyp_dump_at_boot = 1;
+
+        if (!p)
+                return 0;
+
+        if (strncmp(p, "1", 1) == 0)
+		phyp_dump_info->phyp_dump_at_boot = 1;
+        else if (strncmp(p, "0", 1) == 0)
+		phyp_dump_info->phyp_dump_at_boot = 0;
+
+        return 0;
+}
+early_param("phyp_dump", early_phyp_dump_enabled);
+
+/* Look for phyp_dump_reserve_size= cmdline option */
+static int __init early_phyp_dump_reserve_size(char *p)
+{
+        if (p)
+		phyp_dump_info->reserve_bootvar = memparse(p, &p);
+
+        return 0;
+}
+early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size);
diff --git a/arch/powerpc/platforms/pseries/pseries.h b/arch/powerpc/platforms/pseries/pseries.h
index 61136d019554..9e17c0d2a0c8 100644
--- a/arch/powerpc/platforms/pseries/pseries.h
+++ b/arch/powerpc/platforms/pseries/pseries.h
@@ -38,4 +38,6 @@ extern void pSeries_final_fixup(void);
 /* Poweron flag used for enabling auto ups restart */
 extern unsigned long rtas_poweron_auto;
 
+extern void find_udbg_vterm(void);
+
 #endif /* _PSERIES_PSERIES_H */
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 2800fced8c7c..ac75c10de278 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -222,14 +222,14 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length
 	tmp = strchr(buf, ' ');
 	if (!tmp) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	*tmp = '\0';
 
 	if (++tmp >= end) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 
@@ -238,12 +238,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length
 	*length = simple_strtoul(tmp, &tmp, 10);
 	if (*length == -1) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	if (*tmp != ' ' || ++tmp >= end) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 
@@ -252,12 +252,12 @@ static char * parse_next_property(char *buf, char *end, char **name, int *length
 	tmp += *length;
 	if (tmp > end) {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	else if (tmp < end && *tmp != ' ' && *tmp != '\0') {
 		printk(KERN_ERR "property parse failed in %s at line %d\n",
-		       __FUNCTION__, __LINE__);
+		       __func__, __LINE__);
 		return NULL;
 	}
 	tmp++;
diff --git a/arch/powerpc/platforms/pseries/scanlog.c b/arch/powerpc/platforms/pseries/scanlog.c
index 8e1ef168e2dd..e5b0ea870164 100644
--- a/arch/powerpc/platforms/pseries/scanlog.c
+++ b/arch/powerpc/platforms/pseries/scanlog.c
@@ -195,31 +195,30 @@ const struct file_operations scanlog_fops = {
 static int __init scanlog_init(void)
 {
 	struct proc_dir_entry *ent;
+	void *data;
+	int err = -ENOMEM;
 
 	ibm_scan_log_dump = rtas_token("ibm,scan-log-dump");
-	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) {
-		printk(KERN_ERR "scan-log-dump not implemented on this system\n");
-		return -EIO;
-	}
+	if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE)
+		return -ENODEV;
 
-        ent = create_proc_entry("ppc64/rtas/scan-log-dump",  S_IRUSR, NULL);
-	if (ent) {
-		ent->proc_fops = &scanlog_fops;
-		/* Ideally we could allocate a buffer < 4G */
-		ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
-		if (!ent->data) {
-			printk(KERN_ERR "Failed to allocate a buffer\n");
-			remove_proc_entry("scan-log-dump", ent->parent);
-			return -ENOMEM;
-		}
-		((unsigned int *)ent->data)[0] = 0;
-	} else {
-		printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n");
-		return -EIO;
-	}
+	/* Ideally we could allocate a buffer < 4G */
+	data = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL);
+	if (!data)
+		goto err;
+
+	ent = proc_create("ppc64/rtas/scan-log-dump", S_IRUSR, NULL,
+			  &scanlog_fops);
+	if (!ent)
+		goto err;
+
+	ent->data = data;
 	proc_ppc64_scan_log_dump = ent;
 
 	return 0;
+err:
+	kfree(data);
+	return err;
 }
 
 static void __exit scanlog_cleanup(void)
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index fdb9b1c8f977..f66aa9c3b135 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -76,9 +76,6 @@
 #define DBG(fmt...)
 #endif
 
-/* move those away to a .h */
-extern void find_udbg_vterm(void);
-
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
 static void pseries_shared_idle_sleep(void);
@@ -127,14 +124,60 @@ void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
 	desc->chip->eoi(irq);
 }
 
-static void __init pseries_mpic_init_IRQ(void)
+static void __init pseries_setup_i8259_cascade(void)
 {
-	struct device_node *np, *old, *cascade = NULL;
-        const unsigned int *addrp;
+	struct device_node *np, *old, *found = NULL;
+	unsigned int cascade;
+	const u32 *addrp;
 	unsigned long intack = 0;
+	int naddr;
+
+	for_each_node_by_type(np, "interrupt-controller") {
+		if (of_device_is_compatible(np, "chrp,iic")) {
+			found = np;
+			break;
+		}
+	}
+
+	if (found == NULL) {
+		printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
+		return;
+	}
+
+	cascade = irq_of_parse_and_map(found, 0);
+	if (cascade == NO_IRQ) {
+		printk(KERN_ERR "pic: failed to map cascade interrupt");
+		return;
+	}
+	pr_debug("pic: cascade mapped to irq %d\n", cascade);
+
+	for (old = of_node_get(found); old != NULL ; old = np) {
+		np = of_get_parent(old);
+		of_node_put(old);
+		if (np == NULL)
+			break;
+		if (strcmp(np->name, "pci") != 0)
+			continue;
+		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+		if (addrp == NULL)
+			continue;
+		naddr = of_n_addr_cells(np);
+		intack = addrp[naddr-1];
+		if (naddr > 1)
+			intack |= ((unsigned long)addrp[naddr-2]) << 32;
+	}
+	if (intack)
+		printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
+	i8259_init(found, intack);
+	of_node_put(found);
+	set_irq_chained_handler(cascade, pseries_8259_cascade);
+}
+
+static void __init pseries_mpic_init_IRQ(void)
+{
+	struct device_node *np;
 	const unsigned int *opprop;
 	unsigned long openpic_addr = 0;
-	unsigned int cascade_irq;
 	int naddr, n, i, opplen;
 	struct mpic *mpic;
 
@@ -167,43 +210,13 @@ static void __init pseries_mpic_init_IRQ(void)
 	mpic_init(mpic);
 
 	/* Look for cascade */
-	for_each_node_by_type(np, "interrupt-controller")
-		if (of_device_is_compatible(np, "chrp,iic")) {
-			cascade = np;
-			break;
-		}
-	if (cascade == NULL)
-		return;
-
-	cascade_irq = irq_of_parse_and_map(cascade, 0);
-	if (cascade_irq == NO_IRQ) {
-		printk(KERN_ERR "mpic: failed to map cascade interrupt");
-		return;
-	}
+	pseries_setup_i8259_cascade();
+}
 
-	/* Check ACK type */
-	for (old = of_node_get(cascade); old != NULL ; old = np) {
-		np = of_get_parent(old);
-		of_node_put(old);
-		if (np == NULL)
-			break;
-		if (strcmp(np->name, "pci") != 0)
-			continue;
-		addrp = of_get_property(np, "8259-interrupt-acknowledge",
-					    NULL);
-		if (addrp == NULL)
-			continue;
-		naddr = of_n_addr_cells(np);
-		intack = addrp[naddr-1];
-		if (naddr > 1)
-			intack |= ((unsigned long)addrp[naddr-2]) << 32;
-	}
-	if (intack)
-		printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
-		       intack);
-	i8259_init(cascade, intack);
-	of_node_put(cascade);
-	set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
+static void __init pseries_xics_init_IRQ(void)
+{
+	xics_init_IRQ();
+	pseries_setup_i8259_cascade();
 }
 
 static void pseries_lpar_enable_pmcs(void)
@@ -235,7 +248,7 @@ static void __init pseries_discover_pic(void)
 			smp_init_pseries_mpic();
 			return;
 		} else if (strstr(typep, "ppc-xicp")) {
-			ppc_md.init_IRQ       = xics_init_IRQ;
+			ppc_md.init_IRQ       = pseries_xics_init_IRQ;
 			setup_kexec_cpu_down_xics();
 			smp_init_pseries_xics();
 			return;
@@ -393,6 +406,7 @@ static void pseries_dedicated_idle_sleep(void)
 { 
 	unsigned int cpu = smp_processor_id();
 	unsigned long start_snooze;
+	unsigned long in_purr, out_purr;
 
 	/*
 	 * Indicate to the HV that we are idle. Now would be
@@ -400,6 +414,7 @@ static void pseries_dedicated_idle_sleep(void)
 	 */
 	get_lppaca()->idle = 1;
 	get_lppaca()->donate_dedicated_cpu = 1;
+	in_purr = mfspr(SPRN_PURR);
 
 	/*
 	 * We come in with interrupts disabled, and need_resched()
@@ -432,6 +447,8 @@ static void pseries_dedicated_idle_sleep(void)
 
 out:
 	HMT_medium();
+	out_purr = mfspr(SPRN_PURR);
+	get_lppaca()->wait_state_cycles += out_purr - in_purr;
 	get_lppaca()->donate_dedicated_cpu = 0;
 	get_lppaca()->idle = 0;
 }
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index ca52b587166d..43df53c30aa0 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -516,6 +516,8 @@ static struct irq_chip xics_pic_lpar = {
 	.set_affinity = xics_set_affinity
 };
 
+/* Points to the irq_chip we're actually using */
+static struct irq_chip *xics_irq_chip;
 
 static int xics_host_match(struct irq_host *h, struct device_node *node)
 {
@@ -526,23 +528,13 @@ static int xics_host_match(struct irq_host *h, struct device_node *node)
 	return !of_device_is_compatible(node, "chrp,iic");
 }
 
-static int xics_host_map_direct(struct irq_host *h, unsigned int virq,
-				irq_hw_number_t hw)
+static int xics_host_map(struct irq_host *h, unsigned int virq,
+			 irq_hw_number_t hw)
 {
-	pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
+	pr_debug("xics: map virq %d, hwirq 0x%lx\n", virq, hw);
 
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
-	set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq);
-	return 0;
-}
-
-static int xics_host_map_lpar(struct irq_host *h, unsigned int virq,
-			      irq_hw_number_t hw)
-{
-	pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw);
-
-	get_irq_desc(virq)->status |= IRQ_LEVEL;
-	set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq);
+	set_irq_chip_and_handler(virq, xics_irq_chip, handle_fasteoi_irq);
 	return 0;
 }
 
@@ -561,27 +553,20 @@ static int xics_host_xlate(struct irq_host *h, struct device_node *ct,
 	return 0;
 }
 
-static struct irq_host_ops xics_host_direct_ops = {
+static struct irq_host_ops xics_host_ops = {
 	.match = xics_host_match,
-	.map = xics_host_map_direct,
-	.xlate = xics_host_xlate,
-};
-
-static struct irq_host_ops xics_host_lpar_ops = {
-	.match = xics_host_match,
-	.map = xics_host_map_lpar,
+	.map = xics_host_map,
 	.xlate = xics_host_xlate,
 };
 
 static void __init xics_init_host(void)
 {
-	struct irq_host_ops *ops;
-
 	if (firmware_has_feature(FW_FEATURE_LPAR))
-		ops = &xics_host_lpar_ops;
+		xics_irq_chip = &xics_pic_lpar;
 	else
-		ops = &xics_host_direct_ops;
-	xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, ops,
+		xics_irq_chip = &xics_pic_direct;
+
+	xics_host = irq_alloc_host(NULL, IRQ_HOST_MAP_TREE, 0, &xics_host_ops,
 				   XICS_IRQ_SPURIOUS);
 	BUG_ON(xics_host == NULL);
 	irq_set_default_host(xics_host);
@@ -655,52 +640,6 @@ static void __init xics_init_one_node(struct device_node *np,
 	}
 }
 
-
-static void __init xics_setup_8259_cascade(void)
-{
-	struct device_node *np, *old, *found = NULL;
-	int cascade, naddr;
-	const u32 *addrp;
-	unsigned long intack = 0;
-
-	for_each_node_by_type(np, "interrupt-controller")
-		if (of_device_is_compatible(np, "chrp,iic")) {
-			found = np;
-			break;
-		}
-	if (found == NULL) {
-		printk(KERN_DEBUG "xics: no ISA interrupt controller\n");
-		return;
-	}
-	cascade = irq_of_parse_and_map(found, 0);
-	if (cascade == NO_IRQ) {
-		printk(KERN_ERR "xics: failed to map cascade interrupt");
-		return;
-	}
-	pr_debug("xics: cascade mapped to irq %d\n", cascade);
-
-	for (old = of_node_get(found); old != NULL ; old = np) {
-		np = of_get_parent(old);
-		of_node_put(old);
-		if (np == NULL)
-			break;
-		if (strcmp(np->name, "pci") != 0)
-			continue;
-		addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL);
-		if (addrp == NULL)
-			continue;
-		naddr = of_n_addr_cells(np);
-		intack = addrp[naddr-1];
-		if (naddr > 1)
-			intack |= ((unsigned long)addrp[naddr-2]) << 32;
-	}
-	if (intack)
-		printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack);
-	i8259_init(found, intack);
-	of_node_put(found);
-	set_irq_chained_handler(cascade, pseries_8259_cascade);
-}
-
 void __init xics_init_IRQ(void)
 {
 	struct device_node *np;
@@ -733,8 +672,6 @@ void __init xics_init_IRQ(void)
 
 	xics_setup_cpu();
 
-	xics_setup_8259_cascade();
-
 	ppc64_boot_msg(0x21, "XICS Done");
 }
 
@@ -763,7 +700,7 @@ void xics_request_IPIs(void)
 }
 #endif /* CONFIG_SMP */
 
-void xics_teardown_cpu()
+void xics_teardown_cpu(void)
 {
 	int cpu = smp_processor_id();
 
diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h
index c26bcff47b6d..1c5321ae8f2f 100644
--- a/arch/powerpc/platforms/pseries/xics.h
+++ b/arch/powerpc/platforms/pseries/xics.h
@@ -28,7 +28,4 @@ struct xics_ipi_struct {
 
 extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned;
 
-struct irq_desc;
-extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc);
-
 #endif /* _POWERPC_KERNEL_XICS_H */
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 15f3e8527d77..6d386d0071a0 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
 obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
+obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
@@ -27,6 +28,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
 obj-$(CONFIG_4xx)		+= uic.o
+obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o
 obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o
 obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index f589999361e0..64ec7d629363 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -52,6 +52,10 @@ bcom_task_alloc(int bd_count, int bd_size, int priv_size)
 	int i, tasknum = -1;
 	struct bcom_task *tsk;
 
+	/* Don't try to do anything if bestcomm init failed */
+	if (!bcom_eng)
+		return NULL;
+
 	/* Get and reserve a task num */
 	spin_lock(&bcom_eng->lock);
 
@@ -484,8 +488,8 @@ mpc52xx_bcom_remove(struct of_device *op)
 }
 
 static struct of_device_id mpc52xx_bcom_of_match[] = {
-	{ .type = "dma-controller", .compatible = "fsl,mpc5200-bestcomm", },
-	{ .type = "dma-controller", .compatible = "mpc5200-bestcomm", },
+	{ .compatible = "fsl,mpc5200-bestcomm", },
+	{ .compatible = "mpc5200-bestcomm", },
 	{},
 };
 
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index df8bd2b64796..58292a086c16 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -44,9 +44,6 @@
 
 #define CPM_MAP_SIZE    (0x4000)
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static void m8xx_cpm_dpinit(void);
-#endif
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
 immap_t __iomem *mpc8xx_immr;
 static cpic8xx_t __iomem *cpic_reg;
@@ -229,12 +226,7 @@ void __init cpm_reset(void)
 	out_be32(&siu_conf->sc_sdcr, 1);
 	immr_unmap(siu_conf);
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	cpm_muram_init();
-#else
-	/* Reclaim the DP memory for our use. */
-	m8xx_cpm_dpinit();
-#endif
 }
 
 static DEFINE_SPINLOCK(cmd_lock);
@@ -257,7 +249,7 @@ int cpm_command(u32 command, u8 opcode)
 		if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
 			goto out;
 
-	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
 	ret = -EIO;
 out:
 	spin_unlock_irqrestore(&cmd_lock, flags);
@@ -293,110 +285,6 @@ cpm_setbrg(uint brg, uint rate)
 			      CPM_BRG_EN | CPM_BRG_DIV16);
 }
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/*
- * 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up...
- */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-#define CPM_DPMEM_ALIGNMENT	8
-static u8 __iomem *dpram_vbase;
-static phys_addr_t dpram_pbase;
-
-static void m8xx_cpm_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	dpram_vbase = cpmp->cp_dpmem;
-	dpram_pbase = get_immrbase() + offsetof(immap_t, im_cpm.cp_dpmem);
-
-	/* Initialize the info header */
-	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/*
-	 * Attach the usable dpmem area.
-	 * XXX: This is actually crap.  CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE are a subset of the available dparm.  It varies
-	 * with the processor and the microcode patches applied / activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/*
- * Allocate the requested size worth of DP memory.
- * This function returns an offset into the DPRAM area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return (uint)start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(dpram_vbase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-
-uint cpm_dpram_phys(u8 *addr)
-{
-	return (dpram_pbase + (uint)(addr - dpram_vbase));
-}
-EXPORT_SYMBOL(cpm_dpram_phys);
-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
-
 struct cpm_ioport16 {
 	__be16 dir, par, odr_sor, dat, intr;
 	__be16 res[3];
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 7be711232124..5a6c5dfc53ef 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -46,10 +46,6 @@
 
 #include <sysdev/fsl_soc.h>
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-static void cpm2_dpinit(void);
-#endif
-
 cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor space */
 
 /* We allocate this here because it is used almost exclusively for
@@ -71,15 +67,17 @@ void __init cpm2_reset(void)
 
 	/* Reclaim the DP memory for our use.
 	 */
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 	cpm_muram_init();
-#else
-	cpm2_dpinit();
-#endif
 
 	/* Tell everyone where the comm processor resides.
 	 */
 	cpmp = &cpm2_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+	/* Reset the CPM.
+	 */
+	cpm_command(CPM_CR_RST, 0);
+#endif
 }
 
 static DEFINE_SPINLOCK(cmd_lock);
@@ -99,7 +97,7 @@ int cpm_command(u32 command, u8 opcode)
 		if ((in_be32(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
 			goto out;
 
-	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __FUNCTION__);
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
 	ret = -EIO;
 out:
 	spin_unlock_irqrestore(&cmd_lock, flags);
@@ -240,6 +238,7 @@ int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 	case CPM_CLK_SCC1:
 		reg = &im_cpmux->cmx_scr;
 		shift = 24;
+		break;
 	case CPM_CLK_SCC2:
 		reg = &im_cpmux->cmx_scr;
 		shift = 16;
@@ -346,95 +345,6 @@ int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock)
 	return ret;
 }
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-static u8 __iomem *im_dprambase;
-
-static void cpm2_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	/* initialize the info header */
-	rh_init(&cpm_dpmem_info, 1,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	im_dprambase = cpm2_immr;
-
-	/* Attach the usable dpmem area */
-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
-	 * varies with the processor and the microcode patches activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return (uint)start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(im_dprambase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-#endif /* !CONFIG_PPC_CPM_NEW_BINDING */
-
 struct cpm2_ioports {
 	u32 dir, par, sor, odr, dat;
 	u32 res[3];
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 165981c87786..cb7df2dce44f 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -58,7 +58,6 @@ void __init udbg_init_cpm(void)
 }
 #endif
 
-#ifdef CONFIG_PPC_CPM_NEW_BINDING
 static spinlock_t cpm_muram_lock;
 static rh_block_t cpm_boot_muram_rh_block[16];
 static rh_info_t cpm_muram_info;
@@ -199,5 +198,3 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
-
-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index e0e24b01e3a6..005c2ecf976f 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -37,6 +37,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/suspend.h>
+#include <linux/lmb.h>
 #include <asm/io.h>
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -44,7 +45,6 @@
 #include <asm/machdep.h>
 #include <asm/abs_addr.h>
 #include <asm/cacheflush.h>
-#include <asm/lmb.h>
 #include <asm/ppc-pci.h>
 
 #include "dart.h"
diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c
new file mode 100644
index 000000000000..422c8faef593
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_lbc.c
@@ -0,0 +1,129 @@
+/*
+ * Freescale LBC and UPM routines.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <asm/fsl_lbc.h>
+
+spinlock_t fsl_lbc_lock = __SPIN_LOCK_UNLOCKED(fsl_lbc_lock);
+
+struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+EXPORT_SYMBOL(fsl_lbc_regs);
+
+static char __initdata *compat_lbc[] = {
+	"fsl,pq2-localbus",
+	"fsl,pq2pro-localbus",
+	"fsl,pq3-localbus",
+	"fsl,elbc",
+};
+
+static int __init fsl_lbc_init(void)
+{
+	struct device_node *lbus;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(compat_lbc); i++) {
+		lbus = of_find_compatible_node(NULL, NULL, compat_lbc[i]);
+		if (lbus)
+			goto found;
+	}
+	return -ENODEV;
+
+found:
+	fsl_lbc_regs = of_iomap(lbus, 0);
+	of_node_put(lbus);
+	if (!fsl_lbc_regs)
+		return -ENOMEM;
+	return 0;
+}
+arch_initcall(fsl_lbc_init);
+
+/**
+ * fsl_lbc_find - find Localbus bank
+ * @addr_base:	base address of the memory bank
+ *
+ * This function walks LBC banks comparing "Base address" field of the BR
+ * registers with the supplied addr_base argument. When bases match this
+ * function returns bank number (starting with 0), otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_lbc_find(phys_addr_t addr_base)
+{
+	int i;
+
+	if (!fsl_lbc_regs)
+		return -ENODEV;
+
+	for (i = 0; i < ARRAY_SIZE(fsl_lbc_regs->bank); i++) {
+		__be32 br = in_be32(&fsl_lbc_regs->bank[i].br);
+		__be32 or = in_be32(&fsl_lbc_regs->bank[i].or);
+
+		if (br & BR_V && (br & or & BR_BA) == addr_base)
+			return i;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(fsl_lbc_find);
+
+/**
+ * fsl_upm_find - find pre-programmed UPM via base address
+ * @addr_base:	base address of the memory bank controlled by the UPM
+ * @upm:	pointer to the allocated fsl_upm structure
+ *
+ * This function fills fsl_upm structure so you can use it with the rest of
+ * UPM API. On success this function returns 0, otherwise it returns
+ * appropriate errno value.
+ */
+int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm)
+{
+	int bank;
+	__be32 br;
+
+	bank = fsl_lbc_find(addr_base);
+	if (bank < 0)
+		return bank;
+
+	br = in_be32(&fsl_lbc_regs->bank[bank].br);
+
+	switch (br & BR_MSEL) {
+	case BR_MS_UPMA:
+		upm->mxmr = &fsl_lbc_regs->mamr;
+		break;
+	case BR_MS_UPMB:
+		upm->mxmr = &fsl_lbc_regs->mbmr;
+		break;
+	case BR_MS_UPMC:
+		upm->mxmr = &fsl_lbc_regs->mcmr;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (br & BR_PS) {
+	case BR_PS_8:
+		upm->width = 8;
+		break;
+	case BR_PS_16:
+		upm->width = 16;
+		break;
+	case BR_PS_32:
+		upm->width = 32;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(fsl_upm_find);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 2c5388ce902a..5c1b246aaccc 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -75,6 +75,33 @@ phys_addr_t get_immrbase(void)
 
 EXPORT_SYMBOL(get_immrbase);
 
+static u32 sysfreq = -1;
+
+u32 fsl_get_sys_freq(void)
+{
+	struct device_node *soc;
+	const u32 *prop;
+	int size;
+
+	if (sysfreq != -1)
+		return sysfreq;
+
+	soc = of_find_node_by_type(NULL, "soc");
+	if (!soc)
+		return -1;
+
+	prop = of_get_property(soc, "clock-frequency", &size);
+	if (!prop || size != sizeof(*prop) || *prop == 0)
+		prop = of_get_property(soc, "bus-frequency", &size);
+
+	if (prop && size == sizeof(*prop))
+		sysfreq = *prop;
+
+	of_node_put(soc);
+	return sysfreq;
+}
+EXPORT_SYMBOL(fsl_get_sys_freq);
+
 #if defined(CONFIG_CPM2) || defined(CONFIG_QUICC_ENGINE) || defined(CONFIG_8xx)
 
 static u32 brgfreq = -1;
@@ -341,7 +368,7 @@ static int __init gfar_of_init(void)
 				goto unreg;
 			}
 
-			gfar_data.bus_id = 0;
+			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "0");
 			gfar_data.phy_id = fixed_link[0];
 		} else {
 			phy = of_find_node_by_phandle(*ph);
@@ -362,7 +389,8 @@ static int __init gfar_of_init(void)
 			}
 
 			gfar_data.phy_id = *id;
-			gfar_data.bus_id = res.start;
+			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x",
+					res.start);
 
 			of_node_put(phy);
 			of_node_put(mdio);
@@ -516,9 +544,9 @@ arch_initcall(fsl_i2c_of_init);
 static int __init mpc83xx_wdt_init(void)
 {
 	struct resource r;
-	struct device_node *soc, *np;
+	struct device_node *np;
 	struct platform_device *dev;
-	const unsigned int *freq;
+	u32 freq = fsl_get_sys_freq();
 	int ret;
 
 	np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
@@ -528,19 +556,6 @@ static int __init mpc83xx_wdt_init(void)
 		goto nodev;
 	}
 
-	soc = of_find_node_by_type(NULL, "soc");
-
-	if (!soc) {
-		ret = -ENODEV;
-		goto nosoc;
-	}
-
-	freq = of_get_property(soc, "bus-frequency", NULL);
-	if (!freq) {
-		ret = -ENODEV;
-		goto err;
-	}
-
 	memset(&r, 0, sizeof(r));
 
 	ret = of_address_to_resource(np, 0, &r);
@@ -553,20 +568,16 @@ static int __init mpc83xx_wdt_init(void)
 		goto err;
 	}
 
-	ret = platform_device_add_data(dev, freq, sizeof(int));
+	ret = platform_device_add_data(dev, &freq, sizeof(freq));
 	if (ret)
 		goto unreg;
 
-	of_node_put(soc);
 	of_node_put(np);
-
 	return 0;
 
 unreg:
 	platform_device_unregister(dev);
 err:
-	of_node_put(soc);
-nosoc:
 	of_node_put(np);
 nodev:
 	return ret;
@@ -735,547 +746,6 @@ err:
 
 arch_initcall(fsl_usb_of_init);
 
-#ifndef CONFIG_PPC_CPM_NEW_BINDING
-#ifdef CONFIG_CPM2
-
-extern void init_scc_ioports(struct fs_uart_platform_info*);
-
-static const char fcc_regs[] = "fcc_regs";
-static const char fcc_regs_c[] = "fcc_regs_c";
-static const char fcc_pram[] = "fcc_pram";
-static char bus_id[9][BUS_ID_SIZE];
-
-static int __init fs_enet_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *fs_enet_dev;
-	struct resource res;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
-	     i++) {
-		struct resource r[4];
-		struct device_node *phy, *mdio;
-		struct fs_platform_info fs_enet_data;
-		const unsigned int *id, *phy_addr, *phy_irq;
-		const void *mac_addr;
-		const phandle *ph;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-		r[0].name = fcc_regs;
-
-		ret = of_address_to_resource(np, 1, &r[1]);
-		if (ret)
-			goto err;
-		r[1].name = fcc_pram;
-
-		ret = of_address_to_resource(np, 2, &r[2]);
-		if (ret)
-			goto err;
-		r[2].name = fcc_regs_c;
-		fs_enet_data.fcc_regs_c = r[2].start;
-
-		of_irq_to_resource(np, 0, &r[3]);
-
-		fs_enet_dev =
-		    platform_device_register_simple("fsl-cpm-fcc", i, &r[0], 4);
-
-		if (IS_ERR(fs_enet_dev)) {
-			ret = PTR_ERR(fs_enet_dev);
-			goto err;
-		}
-
-		model = of_get_property(np, "model", NULL);
-		if (model == NULL) {
-			ret = -ENODEV;
-			goto unreg;
-		}
-
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			memcpy(fs_enet_data.macaddr, mac_addr, 6);
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		phy = of_find_node_by_phandle(*ph);
-
-		if (phy == NULL) {
-			ret = -ENODEV;
-			goto unreg;
-		}
-
-		phy_addr = of_get_property(phy, "reg", NULL);
-		fs_enet_data.phy_addr = *phy_addr;
-
-		phy_irq = of_get_property(phy, "interrupts", NULL);
-
-		id = of_get_property(np, "device-id", NULL);
-		fs_enet_data.fs_no = *id;
-		strcpy(fs_enet_data.fs_type, model);
-
-		mdio = of_get_parent(phy);
-                ret = of_address_to_resource(mdio, 0, &res);
-                if (ret) {
-                        of_node_put(phy);
-                        of_node_put(mdio);
-                        goto unreg;
-                }
-
-		fs_enet_data.clk_rx = *((u32 *)of_get_property(np,
-						"rx-clock", NULL));
-		fs_enet_data.clk_tx = *((u32 *)of_get_property(np,
-						"tx-clock", NULL));
-
-		if (strstr(model, "FCC")) {
-			int fcc_index = *id - 1;
-			const unsigned char *mdio_bb_prop;
-
-			fs_enet_data.dpram_offset = (u32)cpm_dpram_addr(0);
-			fs_enet_data.rx_ring = 32;
-			fs_enet_data.tx_ring = 32;
-			fs_enet_data.rx_copybreak = 240;
-			fs_enet_data.use_napi = 0;
-			fs_enet_data.napi_weight = 17;
-			fs_enet_data.mem_offset = FCC_MEM_OFFSET(fcc_index);
-			fs_enet_data.cp_page = CPM_CR_FCC_PAGE(fcc_index);
-			fs_enet_data.cp_block = CPM_CR_FCC_SBLOCK(fcc_index);
-
-			snprintf((char*)&bus_id[(*id)], BUS_ID_SIZE, "%x:%02x",
-							(u32)res.start, fs_enet_data.phy_addr);
-			fs_enet_data.bus_id = (char*)&bus_id[(*id)];
-			fs_enet_data.init_ioports = init_fcc_ioports;
-
-			mdio_bb_prop = of_get_property(phy, "bitbang", NULL);
-			if (mdio_bb_prop) {
-				struct platform_device *fs_enet_mdio_bb_dev;
-				struct fs_mii_bb_platform_info fs_enet_mdio_bb_data;
-
-				fs_enet_mdio_bb_dev =
-					platform_device_register_simple("fsl-bb-mdio",
-							i, NULL, 0);
-				memset(&fs_enet_mdio_bb_data, 0,
-						sizeof(struct fs_mii_bb_platform_info));
-				fs_enet_mdio_bb_data.mdio_dat.bit =
-					mdio_bb_prop[0];
-				fs_enet_mdio_bb_data.mdio_dir.bit =
-					mdio_bb_prop[1];
-				fs_enet_mdio_bb_data.mdc_dat.bit =
-					mdio_bb_prop[2];
-				fs_enet_mdio_bb_data.mdio_port =
-					mdio_bb_prop[3];
-				fs_enet_mdio_bb_data.mdc_port =
-					mdio_bb_prop[4];
-				fs_enet_mdio_bb_data.delay =
-					mdio_bb_prop[5];
-
-				fs_enet_mdio_bb_data.irq[0] = phy_irq[0];
-				fs_enet_mdio_bb_data.irq[1] = -1;
-				fs_enet_mdio_bb_data.irq[2] = -1;
-				fs_enet_mdio_bb_data.irq[3] = phy_irq[0];
-				fs_enet_mdio_bb_data.irq[31] = -1;
-
-				fs_enet_mdio_bb_data.mdio_dat.offset =
-					(u32)&cpm2_immr->im_ioport.iop_pdatc;
-				fs_enet_mdio_bb_data.mdio_dir.offset =
-					(u32)&cpm2_immr->im_ioport.iop_pdirc;
-				fs_enet_mdio_bb_data.mdc_dat.offset =
-					(u32)&cpm2_immr->im_ioport.iop_pdatc;
-
-				ret = platform_device_add_data(
-						fs_enet_mdio_bb_dev,
-						&fs_enet_mdio_bb_data,
-						sizeof(struct fs_mii_bb_platform_info));
-				if (ret)
-					goto unreg;
-			}
-
-			of_node_put(phy);
-			of_node_put(mdio);
-
-			ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
-						     sizeof(struct
-							    fs_platform_info));
-			if (ret)
-				goto unreg;
-		}
-	}
-	return 0;
-
-unreg:
-	platform_device_unregister(fs_enet_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fs_enet_of_init);
-
-static const char scc_regs[] = "regs";
-static const char scc_pram[] = "pram";
-
-static int __init cpm_uart_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *cpm_uart_dev;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
-	     i++) {
-		struct resource r[3];
-		struct fs_uart_platform_info cpm_uart_data;
-		const int *id;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		r[0].name = scc_regs;
-
-		ret = of_address_to_resource(np, 1, &r[1]);
-		if (ret)
-			goto err;
-		r[1].name = scc_pram;
-
-		of_irq_to_resource(np, 0, &r[2]);
-
-		cpm_uart_dev =
-		    platform_device_register_simple("fsl-cpm-scc:uart", i, &r[0], 3);
-
-		if (IS_ERR(cpm_uart_dev)) {
-			ret = PTR_ERR(cpm_uart_dev);
-			goto err;
-		}
-
-		id = of_get_property(np, "device-id", NULL);
-		cpm_uart_data.fs_no = *id;
-
-		model = of_get_property(np, "model", NULL);
-		strcpy(cpm_uart_data.fs_type, model);
-
-		cpm_uart_data.uart_clk = ppc_proc_freq;
-
-		cpm_uart_data.tx_num_fifo = 4;
-		cpm_uart_data.tx_buf_size = 32;
-		cpm_uart_data.rx_num_fifo = 4;
-		cpm_uart_data.rx_buf_size = 32;
-		cpm_uart_data.clk_rx = *((u32 *)of_get_property(np,
-						"rx-clock", NULL));
-		cpm_uart_data.clk_tx = *((u32 *)of_get_property(np,
-						"tx-clock", NULL));
-
-		ret =
-		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
-					     sizeof(struct
-						    fs_uart_platform_info));
-		if (ret)
-			goto unreg;
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(cpm_uart_dev);
-err:
-	return ret;
-}
-
-arch_initcall(cpm_uart_of_init);
-#endif /* CONFIG_CPM2 */
-
-#ifdef CONFIG_8xx
-
-extern void init_scc_ioports(struct fs_platform_info*);
-extern int platform_device_skip(const char *model, int id);
-
-static int __init fs_enet_mdio_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *mdio_dev;
-	struct resource res;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "mdio", "fs_enet")) != NULL;
-	     i++) {
-		struct fs_mii_fec_platform_info mdio_data;
-
-		memset(&res, 0, sizeof(res));
-		memset(&mdio_data, 0, sizeof(mdio_data));
-
-		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
-			goto err;
-
-		mdio_dev =
-		    platform_device_register_simple("fsl-cpm-fec-mdio",
-						    res.start, &res, 1);
-		if (IS_ERR(mdio_dev)) {
-			ret = PTR_ERR(mdio_dev);
-			goto err;
-		}
-
-		mdio_data.mii_speed = ((((ppc_proc_freq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-
-		ret =
-		    platform_device_add_data(mdio_dev, &mdio_data,
-					     sizeof(struct fs_mii_fec_platform_info));
-		if (ret)
-			goto unreg;
-	}
-	return 0;
-
-unreg:
-	platform_device_unregister(mdio_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fs_enet_mdio_of_init);
-
-static const char *enet_regs = "regs";
-static const char *enet_pram = "pram";
-static const char *enet_irq = "interrupt";
-static char bus_id[9][BUS_ID_SIZE];
-
-static int __init fs_enet_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *fs_enet_dev = NULL;
-	struct resource res;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "network", "fs_enet")) != NULL;
-	     i++) {
-		struct resource r[4];
-		struct device_node *phy = NULL, *mdio = NULL;
-		struct fs_platform_info fs_enet_data;
-		const unsigned int *id;
-		const unsigned int *phy_addr;
-		const void *mac_addr;
-		const phandle *ph;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&fs_enet_data, 0, sizeof(fs_enet_data));
-
-		model = of_get_property(np, "model", NULL);
-		if (model == NULL) {
-			ret = -ENODEV;
-			goto unreg;
-		}
-
-		id = of_get_property(np, "device-id", NULL);
-		fs_enet_data.fs_no = *id;
-
-		if (platform_device_skip(model, *id))
-			continue;
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-		r[0].name = enet_regs;
-
-		mac_addr = of_get_mac_address(np);
-		if (mac_addr)
-			memcpy(fs_enet_data.macaddr, mac_addr, 6);
-
-		ph = of_get_property(np, "phy-handle", NULL);
-		if (ph != NULL)
-			phy = of_find_node_by_phandle(*ph);
-
-		if (phy != NULL) {
-			phy_addr = of_get_property(phy, "reg", NULL);
-			fs_enet_data.phy_addr = *phy_addr;
-			fs_enet_data.has_phy = 1;
-
-			mdio = of_get_parent(phy);
-			ret = of_address_to_resource(mdio, 0, &res);
-			if (ret) {
-				of_node_put(phy);
-				of_node_put(mdio);
-                                goto unreg;
-			}
-		}
-
-		model = of_get_property(np, "model", NULL);
-		strcpy(fs_enet_data.fs_type, model);
-
-		if (strstr(model, "FEC")) {
-			r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
-			r[1].flags = IORESOURCE_IRQ;
-			r[1].name = enet_irq;
-
-			fs_enet_dev =
-				    platform_device_register_simple("fsl-cpm-fec", i, &r[0], 2);
-
-			if (IS_ERR(fs_enet_dev)) {
-				ret = PTR_ERR(fs_enet_dev);
-				goto err;
-			}
-
-			fs_enet_data.rx_ring = 128;
-			fs_enet_data.tx_ring = 16;
-			fs_enet_data.rx_copybreak = 240;
-			fs_enet_data.use_napi = 1;
-			fs_enet_data.napi_weight = 17;
-
-			snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%x:%02x",
-							(u32)res.start, fs_enet_data.phy_addr);
-			fs_enet_data.bus_id = (char*)&bus_id[i];
-			fs_enet_data.init_ioports = init_fec_ioports;
-		}
-		if (strstr(model, "SCC")) {
-			ret = of_address_to_resource(np, 1, &r[1]);
-			if (ret)
-				goto err;
-			r[1].name = enet_pram;
-
-			r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
-			r[2].flags = IORESOURCE_IRQ;
-			r[2].name = enet_irq;
-
-			fs_enet_dev =
-				    platform_device_register_simple("fsl-cpm-scc", i, &r[0], 3);
-
-			if (IS_ERR(fs_enet_dev)) {
-				ret = PTR_ERR(fs_enet_dev);
-				goto err;
-			}
-
-			fs_enet_data.rx_ring = 64;
-			fs_enet_data.tx_ring = 8;
-			fs_enet_data.rx_copybreak = 240;
-			fs_enet_data.use_napi = 1;
-			fs_enet_data.napi_weight = 17;
-
-			snprintf((char*)&bus_id[i], BUS_ID_SIZE, "%s", "fixed@10:1");
-                        fs_enet_data.bus_id = (char*)&bus_id[i];
-			fs_enet_data.init_ioports = init_scc_ioports;
-		}
-
-		of_node_put(phy);
-		of_node_put(mdio);
-
-		ret = platform_device_add_data(fs_enet_dev, &fs_enet_data,
-					     sizeof(struct
-						    fs_platform_info));
-		if (ret)
-			goto unreg;
-	}
-	return 0;
-
-unreg:
-	platform_device_unregister(fs_enet_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fs_enet_of_init);
-
-static int __init fsl_pcmcia_of_init(void)
-{
-	struct device_node *np;
-	/*
-	 * Register all the devices which type is "pcmcia"
-	 */
-	for_each_compatible_node(np, "pcmcia", "fsl,pq-pcmcia")
-		of_platform_device_create(np, "m8xx-pcmcia", NULL);
-	return 0;
-}
-
-arch_initcall(fsl_pcmcia_of_init);
-
-static const char *smc_regs = "regs";
-static const char *smc_pram = "pram";
-
-static int __init cpm_smc_uart_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i;
-	struct platform_device *cpm_uart_dev;
-	int ret;
-
-	for (np = NULL, i = 0;
-	     (np = of_find_compatible_node(np, "serial", "cpm_uart")) != NULL;
-	     i++) {
-		struct resource r[3];
-		struct fs_uart_platform_info cpm_uart_data;
-		const int *id;
-		const char *model;
-
-		memset(r, 0, sizeof(r));
-		memset(&cpm_uart_data, 0, sizeof(cpm_uart_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		r[0].name = smc_regs;
-
-		ret = of_address_to_resource(np, 1, &r[1]);
-		if (ret)
-			goto err;
-		r[1].name = smc_pram;
-
-		r[2].start = r[2].end = irq_of_parse_and_map(np, 0);
-		r[2].flags = IORESOURCE_IRQ;
-
-		cpm_uart_dev =
-		    platform_device_register_simple("fsl-cpm-smc:uart", i, &r[0], 3);
-
-		if (IS_ERR(cpm_uart_dev)) {
-			ret = PTR_ERR(cpm_uart_dev);
-			goto err;
-		}
-
-		model = of_get_property(np, "model", NULL);
-		strcpy(cpm_uart_data.fs_type, model);
-
-		id = of_get_property(np, "device-id", NULL);
-		cpm_uart_data.fs_no = *id;
-		cpm_uart_data.uart_clk = ppc_proc_freq;
-
-		cpm_uart_data.tx_num_fifo = 4;
-		cpm_uart_data.tx_buf_size = 32;
-		cpm_uart_data.rx_num_fifo = 4;
-		cpm_uart_data.rx_buf_size = 32;
-
-		ret =
-		    platform_device_add_data(cpm_uart_dev, &cpm_uart_data,
-					     sizeof(struct
-						    fs_uart_platform_info));
-		if (ret)
-			goto unreg;
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(cpm_uart_dev);
-err:
-	return ret;
-}
-
-arch_initcall(cpm_smc_uart_of_init);
-
-#endif /* CONFIG_8xx */
-#endif /* CONFIG_PPC_CPM_NEW_BINDING */
-
 static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk,
 				   struct spi_board_info *board_infos,
 				   unsigned int num_board_infos,
@@ -1371,25 +841,9 @@ int __init fsl_spi_init(struct spi_board_info *board_infos,
 	sysclk = get_brgfreq();
 #endif
 	if (sysclk == -1) {
-		struct device_node *np;
-		const u32 *freq;
-		int size;
-
-		np = of_find_node_by_type(NULL, "soc");
-		if (!np)
+		sysclk = fsl_get_sys_freq();
+		if (sysclk == -1)
 			return -ENODEV;
-
-		freq = of_get_property(np, "clock-frequency", &size);
-		if (!freq || size != sizeof(*freq) || *freq == 0) {
-			freq = of_get_property(np, "bus-frequency", &size);
-			if (!freq || size != sizeof(*freq) || *freq == 0) {
-				of_node_put(np);
-				return -ENODEV;
-			}
-		}
-
-		sysclk = *freq;
-		of_node_put(np);
 	}
 
 	ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos,
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 63e7db30a4cd..74c4a9657b33 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -7,6 +7,7 @@
 extern phys_addr_t get_immrbase(void);
 extern u32 get_brgfreq(void);
 extern u32 get_baudrate(void);
+extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
 
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index ae0dbf4c1d66..0f2dfb0aaa6a 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -906,7 +906,7 @@ static int __init init_ipic_sysfs(void)
 {
 	int rc;
 
-	if (!primary_ipic->regs)
+	if (!primary_ipic || !primary_ipic->regs)
 		return -ENODEV;
 	printk(KERN_DEBUG "Registering ipic with sysfs...\n");
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 6ffdda244bb1..8619f2a3f1f6 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -175,13 +175,16 @@ static inline void _mpic_write(enum mpic_reg_type type,
 	switch(type) {
 #ifdef CONFIG_PPC_DCR
 	case mpic_access_dcr:
-		return dcr_write(rb->dhost, reg, value);
+		dcr_write(rb->dhost, reg, value);
+		break;
 #endif
 	case mpic_access_mmio_be:
-		return out_be32(rb->base + (reg >> 2), value);
+		out_be32(rb->base + (reg >> 2), value);
+		break;
 	case mpic_access_mmio_le:
 	default:
-		return out_le32(rb->base + (reg >> 2), value);
+		out_le32(rb->base + (reg >> 2), value);
+		break;
 	}
 }
 
@@ -1000,7 +1003,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 				const char *name)
 {
 	struct mpic	*mpic;
-	u32		reg;
+	u32		greg_feature;
 	const char	*vers;
 	int		i;
 	int		intvec_top;
@@ -1064,7 +1067,8 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 
 	/* Look for protected sources */
 	if (node) {
-		unsigned int psize, bits, mapsize;
+		int psize;
+		unsigned int bits, mapsize;
 		const u32 *psrc =
 			of_get_property(node, "protected-sources", &psize);
 		if (psrc) {
@@ -1107,8 +1111,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	 * in, try to obtain one
 	 */
 	if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) {
-		const u32 *reg;
-		reg = of_get_property(node, "reg", NULL);
+		const u32 *reg = of_get_property(node, "reg", NULL);
 		BUG_ON(reg == NULL);
 		paddr = of_translate_address(node, reg);
 		BUG_ON(paddr == OF_BAD_ADDR);
@@ -1137,12 +1140,13 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	 * MPICs, num sources as well. On ISU MPICs, sources are counted
 	 * as ISUs are added
 	 */
-	reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
-	mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK)
+	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
+	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
 	if (isu_size == 0)
-		mpic->num_sources = ((reg & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-				     >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+		mpic->num_sources =
+			((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+			 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
@@ -1161,7 +1165,7 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
 	/* Display version */
-	switch (reg & MPIC_GREG_FEATURE_VERSION_MASK) {
+	switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
 	case 1:
 		vers = "1.0";
 		break;
@@ -1321,7 +1325,7 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable)
 
 void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 {
-	int is_ipi;
+	unsigned int is_ipi;
 	struct mpic *mpic = mpic_find(irq, &is_ipi);
 	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
@@ -1344,7 +1348,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
 
 unsigned int mpic_irq_get_priority(unsigned int irq)
 {
-	int is_ipi;
+	unsigned int is_ipi;
 	struct mpic *mpic = mpic_find(irq, &is_ipi);
 	unsigned int src = mpic_irq_to_hw(irq);
 	unsigned long flags;
@@ -1406,11 +1410,6 @@ void mpic_cpu_set_priority(int prio)
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio);
 }
 
-/*
- * XXX: someone who knows mpic should check this.
- * do we need to eoi the ipi including for kexec cpu here (see xics comments)?
- * or can we reset the mpic in the new kernel?
- */
 void mpic_teardown_this_cpu(int secondary)
 {
 	struct mpic *mpic = mpic_primary;
@@ -1430,6 +1429,10 @@ void mpic_teardown_this_cpu(int secondary)
 
 	/* Set current processor priority to max */
 	mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf);
+	/* We need to EOI the IPI since not all platforms reset the MPIC
+	 * on boot and new interrupts wouldn't get delivered otherwise.
+	 */
+	mpic_eoi(mpic);
 
 	spin_unlock_irqrestore(&mpic_lock, flags);
 }
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index efda0028909d..047b31027fa6 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -127,7 +127,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
 	if (err)
 		return err;
 
-	prop = of_get_property(np, "block-index", NULL);
+	prop = of_get_property(np, "cell-index", NULL);
 	if (!prop)
 		return -ENODEV;
 	port_number = *(int *)prop;
@@ -136,6 +136,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id)
 
 	pdata.cache_mgmt = 1; /* All current revs need this set */
 
+	pdata.max_idle = 40; /* default */
 	prop = of_get_property(np, "max_idle", NULL);
 	if (prop)
 		pdata.max_idle = *prop;
@@ -205,30 +206,24 @@ error:
 /*
  * Create mv64x60_eth platform devices
  */
-static int __init eth_register_shared_pdev(struct device_node *np)
+static struct platform_device * __init mv64x60_eth_register_shared_pdev(
+						struct device_node *np, int id)
 {
 	struct platform_device *pdev;
 	struct resource r[1];
 	int err;
 
-	np = of_get_parent(np);
-	if (!np)
-		return -ENODEV;
-
 	err = of_address_to_resource(np, 0, &r[0]);
-	of_node_put(np);
 	if (err)
-		return err;
+		return ERR_PTR(err);
 
-	pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, 0,
+	pdev = platform_device_register_simple(MV643XX_ETH_SHARED_NAME, id,
 					       r, 1);
-	if (IS_ERR(pdev))
-		return PTR_ERR(pdev);
-
-	return 0;
+	return pdev;
 }
 
-static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
+static int __init mv64x60_eth_device_setup(struct device_node *np, int id,
+					   struct platform_device *shared_pdev)
 {
 	struct resource r[1];
 	struct mv643xx_eth_platform_data pdata;
@@ -239,16 +234,12 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
 	const phandle *ph;
 	int err;
 
-	/* only register the shared platform device the first time through */
-	if (id == 0 && (err = eth_register_shared_pdev(np)))
-		return err;
-
 	memset(r, 0, sizeof(r));
 	of_irq_to_resource(np, 0, &r[0]);
 
 	memset(&pdata, 0, sizeof(pdata));
 
-	prop = of_get_property(np, "block-index", NULL);
+	prop = of_get_property(np, "reg", NULL);
 	if (!prop)
 		return -ENODEV;
 	pdata.port_number = *prop;
@@ -301,7 +292,7 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id)
 
 	of_node_put(phy);
 
-	pdev = platform_device_alloc(MV643XX_ETH_NAME, pdata.port_number);
+	pdev = platform_device_alloc(MV643XX_ETH_NAME, id);
 	if (!pdev)
 		return -ENOMEM;
 
@@ -345,21 +336,19 @@ static int __init mv64x60_i2c_device_setup(struct device_node *np, int id)
 
 	memset(&pdata, 0, sizeof(pdata));
 
+	pdata.freq_m = 8;	/* default */
 	prop = of_get_property(np, "freq_m", NULL);
 	if (!prop)
 		return -ENODEV;
 	pdata.freq_m = *prop;
 
+	pdata.freq_m = 3;	/* default */
 	prop = of_get_property(np, "freq_n", NULL);
 	if (!prop)
 		return -ENODEV;
 	pdata.freq_n = *prop;
 
-	prop = of_get_property(np, "timeout", NULL);
-	if (prop)
-		pdata.timeout = *prop;
-	else
-		pdata.timeout = 1000;	/* 1 second */
+	pdata.timeout = 1000;				/* default: 1 second */
 
 	pdev = platform_device_alloc(MV64XXX_I2C_CTLR_NAME, id);
 	if (!pdev)
@@ -401,10 +390,7 @@ static int __init mv64x60_wdt_device_setup(struct device_node *np, int id)
 
 	memset(&pdata, 0, sizeof(pdata));
 
-	prop = of_get_property(np, "timeout", NULL);
-	if (!prop)
-		return -ENODEV;
-	pdata.timeout = *prop;
+	pdata.timeout = 10;			/* Default: 10 seconds */
 
 	np = of_get_parent(np);
 	if (!np)
@@ -441,27 +427,43 @@ error:
 
 static int __init mv64x60_device_setup(void)
 {
-	struct device_node *np = NULL;
-	int id;
+	struct device_node *np, *np2;
+	struct platform_device *pdev;
+	int id, id2;
 	int err;
 
 	id = 0;
-	for_each_compatible_node(np, "serial", "marvell,mpsc")
+	for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc")
 		if ((err = mv64x60_mpsc_device_setup(np, id++)))
 			goto error;
 
 	id = 0;
-	for_each_compatible_node(np, "network", "marvell,mv64x60-eth")
-		if ((err = mv64x60_eth_device_setup(np, id++)))
+	id2 = 0;
+	for_each_compatible_node(np, NULL, "marvell,mv64360-eth-group") {
+		pdev = mv64x60_eth_register_shared_pdev(np, id++);
+		if (IS_ERR(pdev)) {
+			err = PTR_ERR(pdev);
 			goto error;
+		}
+		for_each_child_of_node(np, np2) {
+			if (!of_device_is_compatible(np2,
+					"marvell,mv64360-eth"))
+				continue;
+			err = mv64x60_eth_device_setup(np2, id2++, pdev);
+			if (err) {
+				of_node_put(np2);
+				goto error;
+			}
+		}
+	}
 
 	id = 0;
-	for_each_compatible_node(np, "i2c", "marvell,mv64x60-i2c")
+	for_each_compatible_node(np, "i2c", "marvell,mv64360-i2c")
 		if ((err = mv64x60_i2c_device_setup(np, id++)))
 			goto error;
 
 	/* support up to one watchdog timer */
-	np = of_find_compatible_node(np, NULL, "marvell,mv64x60-wdt");
+	np = of_find_compatible_node(np, NULL, "marvell,mv64360-wdt");
 	if (np) {
 		if ((err = mv64x60_wdt_device_setup(np, id)))
 			goto error;
@@ -489,10 +491,10 @@ static int __init mv64x60_add_mpsc_console(void)
 	if (!np)
 		goto not_mpsc;
 
-	if (!of_device_is_compatible(np, "marvell,mpsc"))
+	if (!of_device_is_compatible(np, "marvell,mv64360-mpsc"))
 		goto not_mpsc;
 
-	prop = of_get_property(np, "block-index", NULL);
+	prop = of_get_property(np, "cell-index", NULL);
 	if (!prop)
 		goto not_mpsc;
 
diff --git a/arch/powerpc/sysdev/mv64x60_pci.c b/arch/powerpc/sysdev/mv64x60_pci.c
index d21ab8fa4993..1456015a22d8 100644
--- a/arch/powerpc/sysdev/mv64x60_pci.c
+++ b/arch/powerpc/sysdev/mv64x60_pci.c
@@ -86,14 +86,14 @@ static int __init mv64x60_sysfs_init(void)
 	struct platform_device *pdev;
 	const unsigned int *prop;
 
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60");
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
 	if (!np)
 		return 0;
 
 	prop = of_get_property(np, "hs_reg_valid", NULL);
 	of_node_put(np);
 
-	pdev = platform_device_register_simple("marvell,mv64x60", 0, NULL, 0);
+	pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
 	if (IS_ERR(pdev))
 		return PTR_ERR(pdev);
 
@@ -166,6 +166,6 @@ void __init mv64x60_pci_init(void)
 {
 	struct device_node *np;
 
-	for_each_compatible_node(np, "pci", "marvell,mv64x60-pci")
+	for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
 		mv64x60_add_bridge(np);
 }
diff --git a/arch/powerpc/sysdev/mv64x60_pic.c b/arch/powerpc/sysdev/mv64x60_pic.c
index 19e6ef263797..2aa4ed066db1 100644
--- a/arch/powerpc/sysdev/mv64x60_pic.c
+++ b/arch/powerpc/sysdev/mv64x60_pic.c
@@ -238,13 +238,13 @@ void __init mv64x60_init_irq(void)
 	const unsigned int *reg;
 	unsigned long flags;
 
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
 	reg = of_get_property(np, "reg", &size);
 	paddr = of_translate_address(np, reg);
 	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
 	of_node_put(np);
 
-	np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-pic");
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-pic");
 	reg = of_get_property(np, "reg", &size);
 	paddr = of_translate_address(np, reg);
 	mv64x60_irq_reg_base = ioremap(paddr, reg[1]);
diff --git a/arch/powerpc/sysdev/mv64x60_udbg.c b/arch/powerpc/sysdev/mv64x60_udbg.c
index 35c77c7d0616..ccdb3b0418fc 100644
--- a/arch/powerpc/sysdev/mv64x60_udbg.c
+++ b/arch/powerpc/sysdev/mv64x60_udbg.c
@@ -85,7 +85,7 @@ static void mv64x60_udbg_init(void)
 	if (!stdout)
 		return;
 
-	for_each_compatible_node(np, "serial", "marvell,mpsc") {
+	for_each_compatible_node(np, "serial", "marvell,mv64360-mpsc") {
 		if (np == stdout)
 			break;
 	}
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 5abfcd157483..1814adbd2236 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -527,6 +527,7 @@ static void __init ppc4xx_probe_pcix_bridge(struct device_node *np)
  *
  * ibm,plb-pciex-440spe
  * ibm,plb-pciex-405ex
+ * ibm,plb-pciex-460ex
  *
  * Anything else will be rejected for now as they are all subtly
  * different unfortunately.
@@ -645,7 +646,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np)
 	int time_out = 20;
 
 	/* Set PLL clock receiver to LVPECL */
-	mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28);
+	dcri_clrset(SDR0, PESDR0_PLLLCT1, 0, 1 << 28);
 
 	/* Shouldn't we do all the calibration stuff etc... here ? */
 	if (ppc440spe_pciex_check_reset(np))
@@ -659,8 +660,7 @@ static int __init ppc440spe_pciex_core_init(struct device_node *np)
 	}
 
 	/* De-assert reset of PCIe PLL, wait for lock */
-	mtdcri(SDR0, PESDR0_PLLLCT1,
-	       mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24));
+	dcri_clrset(SDR0, PESDR0_PLLLCT1, 1 << 24, 0);
 	udelay(3);
 
 	while (time_out) {
@@ -712,9 +712,8 @@ static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 		mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1,
 		       0x35000000);
 	}
-	val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET);
-	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
-	       (val & ~(1 << 24 | 1 << 16)) | 1 << 12);
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET,
+			(1 << 24) | (1 << 16), 1 << 12);
 
 	return 0;
 }
@@ -775,6 +774,115 @@ static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata =
 	.setup_utl	= ppc440speB_pciex_init_utl,
 };
 
+static int __init ppc460ex_pciex_core_init(struct device_node *np)
+{
+	/* Nothing to do, return 2 ports */
+	return 2;
+}
+
+static int ppc460ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
+{
+	u32 val;
+	u32 utlset1;
+
+	if (port->endpoint)
+		val = PTYPE_LEGACY_ENDPOINT << 20;
+	else
+		val = PTYPE_ROOT_PORT << 20;
+
+	if (port->index == 0) {
+		val |= LNKW_X1 << 12;
+		utlset1 = 0x20000000;
+	} else {
+		val |= LNKW_X4 << 12;
+		utlset1 = 0x20101101;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, utlset1);
+	mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01210000);
+
+	switch (port->index) {
+	case 0:
+		mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000136);
+		mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
+
+		mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST,0x10000000);
+		break;
+
+	case 1:
+		mtdcri(SDR0, PESDR1_460EX_L0CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L1CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L2CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L3CDRCTL, 0x00003230);
+		mtdcri(SDR0, PESDR1_460EX_L0DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L1DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L2DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L3DRV, 0x00000136);
+		mtdcri(SDR0, PESDR1_460EX_L0CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L1CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L2CLK, 0x00000006);
+		mtdcri(SDR0, PESDR1_460EX_L3CLK, 0x00000006);
+
+		mtdcri(SDR0, PESDR1_460EX_PHY_CTL_RST,0x10000000);
+		break;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+	       (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
+
+	/* Poll for PHY reset */
+	/* XXX FIXME add timeout */
+	switch (port->index) {
+	case 0:
+		while (!(mfdcri(SDR0, PESDR0_460EX_RSTSTA) & 0x1))
+			udelay(10);
+		break;
+	case 1:
+		while (!(mfdcri(SDR0, PESDR1_460EX_RSTSTA) & 0x1))
+			udelay(10);
+		break;
+	}
+
+	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
+	       (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) &
+		~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
+	       PESDRx_RCSSET_RSTPYN);
+
+	port->has_ibpre = 1;
+
+	return 0;
+}
+
+static int ppc460ex_pciex_init_utl(struct ppc4xx_pciex_port *port)
+{
+	dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(port->utl_base + PEUTL_PBCTL,	0x0800000c);
+	out_be32(port->utl_base + PEUTL_OUTTR,	0x08000000);
+	out_be32(port->utl_base + PEUTL_INTR,	0x02000000);
+	out_be32(port->utl_base + PEUTL_OPDBSZ,	0x04000000);
+	out_be32(port->utl_base + PEUTL_PBBSZ,	0x00000000);
+	out_be32(port->utl_base + PEUTL_IPHBSZ,	0x02000000);
+	out_be32(port->utl_base + PEUTL_IPDBSZ,	0x04000000);
+	out_be32(port->utl_base + PEUTL_RCIRQEN,0x00f00000);
+	out_be32(port->utl_base + PEUTL_PCTL,	0x80800066);
+
+	return 0;
+}
+
+static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata =
+{
+	.core_init	= ppc460ex_pciex_core_init,
+	.port_init_hw	= ppc460ex_pciex_init_port_hw,
+	.setup_utl	= ppc460ex_pciex_init_utl,
+};
+
 #endif /* CONFIG_44x */
 
 #ifdef CONFIG_40x
@@ -830,17 +938,9 @@ static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port)
 	 * PCIe boards don't show this problem.
 	 * This has to be re-tested and fixed in a later release!
 	 */
-#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources
-       * configured as done previously by U-Boot. Then Linux will currently
-       * not reassign them. So the PHY reset is now done always. This will
-       * lead to problems with the Atheros PCIe board again.
-       */
 	val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
 	if (!(val & 0x00001000))
 		ppc405ex_pcie_phy_reset(port);
-#else
-	ppc405ex_pcie_phy_reset(port);
-#endif
 
 	dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000);  /* guarded on */
 
@@ -896,6 +996,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np)
 		else
 			ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops;
 	}
+	if (of_device_is_compatible(np, "ibm,plb-pciex-460ex"))
+		ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops;
 #endif /* CONFIG_44x    */
 #ifdef CONFIG_40x
 	if (of_device_is_compatible(np, "ibm,plb-pciex-405ex"))
@@ -1042,8 +1144,7 @@ static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port)
 		port->link = 0;
 	}
 
-	mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
-	       mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20);
+	dcri_clrset(SDR0, port->sdr_base + PESDRn_RCSSET, 0, 1 << 20);
 	msleep(100);
 
 	return 0;
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h
index 1c07908dc6ef..d04e40b306fb 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.h
+++ b/arch/powerpc/sysdev/ppc4xx_pci.h
@@ -271,6 +271,59 @@
 #define PESDR1_405EX_PHYSTA		0x044C
 
 /*
+ * 460EX additional DCRs
+ */
+#define PESDR0_460EX_L0BIST		0x0308
+#define PESDR0_460EX_L0BISTSTS		0x0309
+#define PESDR0_460EX_L0CDRCTL		0x030A
+#define PESDR0_460EX_L0DRV		0x030B
+#define PESDR0_460EX_L0REC		0x030C
+#define PESDR0_460EX_L0LPB		0x030D
+#define PESDR0_460EX_L0CLK		0x030E
+#define PESDR0_460EX_PHY_CTL_RST	0x030F
+#define PESDR0_460EX_RSTSTA		0x0310
+#define PESDR0_460EX_OBS		0x0311
+#define PESDR0_460EX_L0ERRC		0x0320
+
+#define PESDR1_460EX_L0BIST		0x0348
+#define PESDR1_460EX_L1BIST		0x0349
+#define PESDR1_460EX_L2BIST		0x034A
+#define PESDR1_460EX_L3BIST		0x034B
+#define PESDR1_460EX_L0BISTSTS		0x034C
+#define PESDR1_460EX_L1BISTSTS		0x034D
+#define PESDR1_460EX_L2BISTSTS		0x034E
+#define PESDR1_460EX_L3BISTSTS		0x034F
+#define PESDR1_460EX_L0CDRCTL		0x0350
+#define PESDR1_460EX_L1CDRCTL		0x0351
+#define PESDR1_460EX_L2CDRCTL		0x0352
+#define PESDR1_460EX_L3CDRCTL		0x0353
+#define PESDR1_460EX_L0DRV		0x0354
+#define PESDR1_460EX_L1DRV		0x0355
+#define PESDR1_460EX_L2DRV		0x0356
+#define PESDR1_460EX_L3DRV		0x0357
+#define PESDR1_460EX_L0REC		0x0358
+#define PESDR1_460EX_L1REC		0x0359
+#define PESDR1_460EX_L2REC		0x035A
+#define PESDR1_460EX_L3REC		0x035B
+#define PESDR1_460EX_L0LPB		0x035C
+#define PESDR1_460EX_L1LPB		0x035D
+#define PESDR1_460EX_L2LPB		0x035E
+#define PESDR1_460EX_L3LPB		0x035F
+#define PESDR1_460EX_L0CLK		0x0360
+#define PESDR1_460EX_L1CLK		0x0361
+#define PESDR1_460EX_L2CLK		0x0362
+#define PESDR1_460EX_L3CLK		0x0363
+#define PESDR1_460EX_PHY_CTL_RST	0x0364
+#define PESDR1_460EX_RSTSTA		0x0365
+#define PESDR1_460EX_OBS		0x0366
+#define PESDR1_460EX_L0ERRC		0x0368
+#define PESDR1_460EX_L1ERRC		0x0369
+#define PESDR1_460EX_L2ERRC		0x036A
+#define PESDR1_460EX_L3ERRC		0x036B
+#define PESDR0_460EX_IHS1		0x036C
+#define PESDR0_460EX_IHS2		0x036D
+
+/*
  * Of the above, some are common offsets from the base
  */
 #define PESDRn_UTLSET1			0x00
@@ -353,6 +406,12 @@
 #define PECFG_POM2LAL		0x390
 #define PECFG_POM2LAH		0x394
 
+/* SDR Bit Mappings */
+#define PESDRx_RCSSET_HLDPLB	0x10000000
+#define PESDRx_RCSSET_RSTGU	0x01000000
+#define PESDRx_RCSSET_RDY       0x00100000
+#define PESDRx_RCSSET_RSTDL     0x00010000
+#define PESDRx_RCSSET_RSTPYN    0x00001000
 
 enum
 {
diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
new file mode 100644
index 000000000000..5b32adc9a9b2
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -0,0 +1,200 @@
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003 - 2006 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+		;
+
+	return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+	u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+	if (sr & L2C_SR_CPE) {
+		/* Read cache trapped address */
+		u32 addr = l2c_diag(0x42000000);
+		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+		       addr);
+	}
+	if (sr & L2C_SR_TPE) {
+		/* Read tag trapped address */
+		u32 addr = l2c_diag(0x82000000) >> 16;
+		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+		       addr);
+	}
+
+	/* Clear parity errors */
+	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+		mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+		mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+	} else {
+		printk(KERN_EMERG "L2C: LRU error\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+	struct device_node *np;
+	u32 r;
+	unsigned long flags;
+	int irq;
+	const u32 *dcrreg;
+	u32 dcrbase_isram;
+	int len;
+	const u32 *prop;
+	u32 l2_size;
+
+	np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+	if (!np)
+		return 0;
+
+	/* Get l2 cache size */
+	prop = of_get_property(np, "cache-size", NULL);
+	if (prop == NULL) {
+		printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
+		of_node_put(np);
+		return -ENODEV;
+	}
+	l2_size = prop[0];
+
+	/* Map DCRs */
+	dcrreg = of_get_property(np, "dcr-reg", &len);
+	if (!dcrreg || (len != 4 * sizeof(u32))) {
+		printk(KERN_ERR "%s: Can't get DCR register base !",
+		       np->full_name);
+		of_node_put(np);
+		return -ENODEV;
+	}
+	dcrbase_isram = dcrreg[0];
+	dcrbase_l2c = dcrreg[2];
+
+	/* Get and map irq number from device tree */
+	irq = irq_of_parse_and_map(np, 0);
+	if (irq == NO_IRQ) {
+		printk(KERN_ERR "irq_of_parse_and_map failed\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	/* Install error handler */
+	if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+		printk(KERN_ERR "Cannot install L2C error handler"
+		       ", cache is not enabled\n");
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	local_irq_save(flags);
+	asm volatile ("sync" ::: "memory");
+
+	/* Disable SRAM */
+	mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+	mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+	/* Enable L2_MODE without ICU/DCU */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+		~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+	/* Hardware Clear Command */
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+		;
+
+	/* Clear Cache Parity and Tag Errors */
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+	/* Enable 64G snoop region starting at 0 */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+	asm volatile ("sync" ::: "memory");
+
+	/* Enable ICU/DCU ports */
+	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+	       | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+	/* Check for 460EX/GT special handling */
+	if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+		r |= L2C_CFG_RDBW;
+
+	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+	asm volatile ("sync; isync" ::: "memory");
+	local_irq_restore(flags);
+
+	printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+	of_node_put(np);
+	return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * At present, this routine just applies a system reset.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+	while (1)
+		;	/* Just in case the reset doesn't work */
+}
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 6efbd5e5bb1b..cff550eec7e8 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -55,7 +55,7 @@ struct qe_snum {
 /* We allocate this here because it is used almost exclusively for
  * the communication processor devices.
  */
-struct qe_immap *qe_immr = NULL;
+struct qe_immap __iomem *qe_immr;
 EXPORT_SYMBOL(qe_immr);
 
 static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
@@ -156,7 +156,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
  */
 static unsigned int brg_clk = 0;
 
-unsigned int get_brg_clk(void)
+unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
 	unsigned int size;
@@ -180,6 +180,7 @@ unsigned int get_brg_clk(void)
 
 	return brg_clk;
 }
+EXPORT_SYMBOL(qe_get_brg_clk);
 
 /* Program the BRG to the given sampling rate and multiplier
  *
@@ -197,7 +198,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier)
 	if ((brg < QE_BRG1) || (brg > QE_BRG16))
 		return -EINVAL;
 
-	divisor = get_brg_clk() / (rate * multiplier);
+	divisor = qe_get_brg_clk() / (rate * multiplier);
 
 	if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
 		div16 = QE_BRGC_DIV16;
@@ -415,12 +416,6 @@ void qe_muram_dump(void)
 }
 EXPORT_SYMBOL(qe_muram_dump);
 
-void *qe_muram_addr(unsigned long offset)
-{
-	return (void *)&qe_immr->muram[offset];
-}
-EXPORT_SYMBOL(qe_muram_addr);
-
 /* The maximum number of RISCs we support */
 #define MAX_QE_RISC     2
 
@@ -509,7 +504,7 @@ int qe_upload_firmware(const struct qe_firmware *firmware)
 	}
 
 	/* Validate some of the fields */
-	if ((firmware->count < 1) || (firmware->count >= MAX_QE_RISC)) {
+	if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) {
 		printk(KERN_ERR "qe-firmware: invalid data\n");
 		return -EINVAL;
 	}
@@ -609,7 +604,10 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 	 * If we haven't checked yet, and a driver hasn't uploaded a firmware
 	 * yet, then check the device tree for information.
 	 */
-	if (initialized || qe_firmware_uploaded)
+	if (qe_firmware_uploaded)
+		return &qe_firmware_info;
+
+	if (initialized)
 		return NULL;
 
 	initialized = 1;
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e53ea4d374a0..93916a48afec 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -22,6 +22,7 @@
 #include <linux/ioport.h>
 
 #include <asm/io.h>
+#include <asm/qe.h>
 #include <asm/prom.h>
 #include <sysdev/fsl_soc.h>
 
@@ -41,7 +42,7 @@ struct port_regs {
 #endif
 };
 
-static struct port_regs *par_io = NULL;
+static struct port_regs __iomem *par_io;
 static int num_par_io_ports = 0;
 
 int par_io_init(struct device_node *np)
@@ -165,7 +166,7 @@ int par_io_of_config(struct device_node *np)
 	}
 
 	ph = of_get_property(np, "pio-handle", NULL);
-	if (ph == 0) {
+	if (ph == NULL) {
 		printk(KERN_ERR "pio-handle not available \n");
 		return -1;
 	}
@@ -200,7 +201,7 @@ static void dump_par_io(void)
 {
 	unsigned int i;
 
-	printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
+	printk(KERN_INFO "%s: par_io=%p\n", __func__, par_io);
 	for (i = 0; i < num_par_io_ports; i++) {
 		printk(KERN_INFO "	cpodr[%u]=%08x\n", i,
 			in_be32(&par_io[i].cpodr));
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3223acbc39e5..bcf88e6ce962 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -148,57 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 
 	/* check if the UCC port number is in range. */
 	if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
 		return -EINVAL;
 	}
 
 	/* Check that 'max_rx_buf_length' is properly aligned (4). */
 	if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
 		printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
-			__FUNCTION__);
+			__func__);
 		return -EINVAL;
 	}
 
 	/* Validate Virtual Fifo register values */
 	if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
-		printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is too small\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
-		printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
+		printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
 		return -EINVAL;
 	}
 
 	uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
 	if (!uccf) {
 		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__FUNCTION__);
+			__func__);
 		return -ENOMEM;
 	}
 
@@ -207,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	/* Set the PHY base address */
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -230,7 +230,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	/* Set UCC to fast type */
 	ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
 	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
 		ucc_fast_free(uccf);
 		return ret;
 	}
@@ -270,7 +270,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	    qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
-			__FUNCTION__);
+			__func__);
 		uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -283,7 +283,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 			   UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
 	if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
-			__FUNCTION__);
+			__func__);
 		uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
 		ucc_fast_free(uccf);
 		return -ENOMEM;
@@ -314,7 +314,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
 					COMM_DIR_RX)) {
 			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
 		}
@@ -323,7 +323,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 		    ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
 					COMM_DIR_TX)) {
 			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_fast_free(uccf);
 			return -EINVAL;
 		}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index b2870b208ddb..a578bc77b9d5 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -142,7 +142,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 
 	/* check if the UCC port number is in range. */
 	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
-		printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
+		printk(KERN_ERR "%s: illegal UCC number\n", __func__);
 		return -EINVAL;
 	}
 
@@ -161,7 +161,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
 	if (!uccs) {
 		printk(KERN_ERR "%s: Cannot allocate private data\n",
-			__FUNCTION__);
+			__func__);
 		return -ENOMEM;
 	}
 
@@ -170,7 +170,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	/* Set the PHY base address */
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
-		printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
+		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -189,7 +189,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_pram_offset =
 		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
 	if (IS_ERR_VALUE(uccs->us_pram_offset)) {
-		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
 		ucc_slow_free(uccs);
 		return -ENOMEM;
 	}
@@ -202,7 +202,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	/* Set UCC to slow type */
 	ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
 	if (ret) {
-		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot set UCC type", __func__);
 		ucc_slow_free(uccs);
 		return ret;
 	}
@@ -216,7 +216,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
 				QE_ALIGNMENT_OF_BD);
 	if (IS_ERR_VALUE(uccs->rx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+		printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
 			us_info->rx_bd_ring_len);
 		uccs->rx_base_offset = 0;
 		ucc_slow_free(uccs);
@@ -227,7 +227,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
 			QE_ALIGNMENT_OF_BD);
 	if (IS_ERR_VALUE(uccs->tx_base_offset)) {
-		printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
+		printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
 		uccs->tx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
@@ -317,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
 					COMM_DIR_RX)) {
 			printk(KERN_ERR "%s: illegal value for RX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
@@ -325,7 +325,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
 					COMM_DIR_TX)) {
 			printk(KERN_ERR "%s: illegal value for TX clock\n",
-			       __FUNCTION__);
+			       __func__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index 0c9ac7ee08fb..c09ddc0dbeb3 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -56,3 +56,5 @@ static int  __init add_rtc(void)
 	return 0;
 }
 fs_initcall(add_rtc);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index be2808a292f7..d4d15aaf18fa 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -84,7 +84,7 @@ static int __init tsi108_eth_of_init(void)
 
 		ret = of_address_to_resource(np, 0, &r[0]);
 		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
-			__FUNCTION__,r[0].name, r[0].start, r[0].end);
+			__func__,r[0].name, r[0].start, r[0].end);
 		if (ret)
 			goto err;
 
@@ -93,7 +93,7 @@ static int __init tsi108_eth_of_init(void)
 		r[1].end = irq_of_parse_and_map(np, 0);
 		r[1].flags = IORESOURCE_IRQ;
 		DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
-			__FUNCTION__,r[1].name, r[1].start, r[1].end);
+			__func__,r[1].name, r[1].start, r[1].end);
 
 		tsi_eth_dev =
 		    platform_device_register_simple("tsi-ethernet", i++, &r[0],
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 31d3d33d91fc..ac1a72dc21e5 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -207,7 +207,7 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary)
 	/* PCI Config mapping */
 	tsi108_pci_cfg_base = (u32)ioremap(cfg_phys, TSI108_PCI_CFG_SIZE);
 	tsi108_pci_cfg_phys = cfg_phys;
-	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __FUNCTION__,
+	DBG("TSI_PCI: %s tsi108_pci_cfg_base=0x%x\n", __func__,
 	    tsi108_pci_cfg_base);
 
 	/* Fetch host bridge registers address */
@@ -395,7 +395,7 @@ static int pci_irq_host_xlate(struct irq_host *h, struct device_node *ct,
 static int pci_irq_host_map(struct irq_host *h, unsigned int virq,
 			  irq_hw_number_t hw)
 {	unsigned int irq;
-	DBG("%s(%d, 0x%lx)\n", __FUNCTION__, virq, hw);
+	DBG("%s(%d, 0x%lx)\n", __func__, virq, hw);
 	if ((virq >= 1) && (virq <= 4)){
 		irq = virq + IRQ_PCI_INTAD_BASE - 1;
 		get_irq_desc(irq)->status |= IRQ_LEVEL;
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index a34172ddc468..52c74780f403 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -45,7 +45,6 @@
 #ifdef CONFIG_PPC64
 #include <asm/hvcall.h>
 #include <asm/paca.h>
-#include <asm/iseries/it_lp_reg_save.h>
 #endif
 
 #include "nonstdio.h"
@@ -1244,15 +1243,12 @@ static void get_function_bounds(unsigned long pc, unsigned long *startp,
 
 static int xmon_depth_to_print = 64;
 
-#ifdef CONFIG_PPC64
-#define LRSAVE_OFFSET		0x10
-#define REG_FRAME_MARKER	0x7265677368657265ul	/* "regshere" */
-#define MARKER_OFFSET		0x60
+#define LRSAVE_OFFSET		(STACK_FRAME_LR_SAVE * sizeof(unsigned long))
+#define MARKER_OFFSET		(STACK_FRAME_MARKER * sizeof(unsigned long))
+
+#ifdef __powerpc64__
 #define REGS_OFFSET		0x70
 #else
-#define LRSAVE_OFFSET		4
-#define REG_FRAME_MARKER	0x72656773
-#define MARKER_OFFSET		8
 #define REGS_OFFSET		16
 #endif
 
@@ -1318,7 +1314,7 @@ static void xmon_show_stack(unsigned long sp, unsigned long lr,
 		/* Look for "regshere" marker to see if this is
 		   an exception frame. */
 		if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
-		    && marker == REG_FRAME_MARKER) {
+		    && marker == STACK_FRAME_REGS_MARKER) {
 			if (mread(sp + REGS_OFFSET, &regs, sizeof(regs))
 			    != sizeof(regs)) {
 				printf("Couldn't read registers at %lx\n",
@@ -1598,7 +1594,6 @@ void super_regs(void)
 		if (firmware_has_feature(FW_FEATURE_ISERIES)) {
 			struct paca_struct *ptrPaca;
 			struct lppaca *ptrLpPaca;
-			struct ItLpRegSave *ptrLpRegSave;
 
 			/* Dump out relevant Paca data areas. */
 			printf("Paca: \n");
@@ -1611,15 +1606,6 @@ void super_regs(void)
 			printf("    Saved Gpr3=%.16lx  Saved Gpr4=%.16lx \n",
 			       ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4);
 			printf("    Saved Gpr5=%.16lx \n", ptrLpPaca->saved_gpr5);
-
-			printf("  Local Processor Register Save Area (LpRegSave): \n");
-			ptrLpRegSave = ptrPaca->reg_save_ptr;
-			printf("    Saved Sprg0=%.16lx  Saved Sprg1=%.16lx \n",
-			       ptrLpRegSave->xSPRG0, ptrLpRegSave->xSPRG0);
-			printf("    Saved Sprg2=%.16lx  Saved Sprg3=%.16lx \n",
-			       ptrLpRegSave->xSPRG2, ptrLpRegSave->xSPRG3);
-			printf("    Saved Msr  =%.16lx  Saved Nia  =%.16lx \n",
-			       ptrLpRegSave->xMSR, ptrLpRegSave->xNIA);
 		}
 #endif
 
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
index 9d656de0f0f1..752443df5ecf 100644
--- a/arch/ppc/8xx_io/commproc.c
+++ b/arch/ppc/8xx_io/commproc.c
@@ -43,7 +43,7 @@
 ({									\
 	u32 offset = offsetof(immap_t, member);				\
 	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      sizeof( ((immap_t*)0)->member));		\
+			      FIELD_SIZEOF(immap_t, member));		\
 	addr;								\
 })
 
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
index 11b0aa6ca97e..2c604d4f6e8b 100644
--- a/arch/ppc/8xx_io/fec.c
+++ b/arch/ppc/8xx_io/fec.c
@@ -199,7 +199,6 @@ static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
 #ifdef	CONFIG_USE_MDIO
 static void fec_enet_mii(struct net_device *dev);
 #endif	/* CONFIG_USE_MDIO */
-static irqreturn_t fec_enet_interrupt(int irq, void * dev_id);
 #ifdef CONFIG_FEC_PACKETHOOK
 static void  fec_enet_tx(struct net_device *dev, __u32 regval);
 static void  fec_enet_rx(struct net_device *dev, __u32 regval);
@@ -472,7 +471,7 @@ fec_timeout(struct net_device *dev)
  * This is called from the MPC core interrupt.
  */
 static	irqreturn_t
-fec_enet_interrupt(int irq, void * dev_id)
+fec_enet_interrupt(int irq, void *dev_id)
 {
 	struct	net_device *dev = dev_id;
 	volatile fec_t	*fecp;
@@ -520,7 +519,7 @@ fec_enet_interrupt(int irq, void * dev_id)
 #ifdef	CONFIG_USE_MDIO
 			fec_enet_mii(dev);
 #else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
 #endif	/* CONFIG_USE_MDIO */
 		}
 
@@ -1441,7 +1440,7 @@ irqreturn_t mii_link_interrupt(int irq, void * dev_id)
 		fecp->fec_ecntrl = ecntrl;	/* restore old settings */
 	}
 #else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__,__LINE__,__FUNCTION__);
+printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
 #endif	/* CONFIG_USE_MDIO */
 
 #ifndef CONFIG_RPXCLASSIC
diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig
index fb493a67c60d..9525e34138fc 100644
--- a/arch/ppc/configs/sandpoint_defconfig
+++ b/arch/ppc/configs/sandpoint_defconfig
@@ -189,7 +189,7 @@ CONFIG_IDE_TASKFILE_IO=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_IDEPCI is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
index 1b0ec7202dd5..e7e642b95138 100644
--- a/arch/ppc/kernel/head.S
+++ b/arch/ppc/kernel/head.S
@@ -701,23 +701,6 @@ load_up_altivec:
 	b	fast_exception_return
 
 /*
- * AltiVec unavailable trap from kernel - print a message, but let
- * the task use AltiVec in the kernel until it returns to user mode.
- */
-KernelAltiVec:
-	lwz	r3,_MSR(r1)
-	oris	r3,r3,MSR_VEC@h
-	stw	r3,_MSR(r1)	/* enable use of AltiVec after return */
-	lis	r3,87f@h
-	ori	r3,r3,87f@l
-	mr	r4,r2		/* current */
-	lwz	r5,_NIP(r1)
-	bl	printk
-	b	ret_from_except
-87:	.string	"AltiVec used in kernel  (task=%p, pc=%x)  \n"
-	.align	4,0
-
-/*
  * giveup_altivec(tsk)
  * Disable AltiVec for the task given as the argument,
  * and save the AltiVec registers in its thread_struct.
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
index eb8d26f87362..321bda2de2cb 100644
--- a/arch/ppc/kernel/head_8xx.S
+++ b/arch/ppc/kernel/head_8xx.S
@@ -329,8 +329,18 @@ InstructionTLBMiss:
 	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
 	lwz	r10, 0(r11)	/* Get the pte */
 
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+	stw	r10, 0(r11)
+4:
+#else
 	ori	r10, r10, _PAGE_ACCESSED
 	stw	r10, 0(r11)
+#endif
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
 	 * Software indicator bits 21, 22 and 28 must be clear.
@@ -395,8 +405,17 @@ DataStoreTLBMiss:
 	DO_8xx_CPU6(0x3b80, r3)
 	mtspr	SPRN_MD_TWC, r11
 
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
+#ifdef CONFIG_SWAP
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+4:
+	/* and update pte in table */
+#else
 	ori	r10, r10, _PAGE_ACCESSED
+#endif
+	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
 	stw	r10, 0(r11)
 
 	/* The Linux PTE won't go exactly into the MMU TLB.
@@ -575,7 +594,16 @@ DataTLBError:
 
 	/* Update 'changed', among others.
 	*/
+#ifdef CONFIG_SWAP
+	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
+	/* do not set the _PAGE_ACCESSED bit of a non-present page */
+	andi.	r11, r10, _PAGE_PRESENT
+	beq	4f
+	ori	r10, r10, _PAGE_ACCESSED
+4:
+#else
 	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
+#endif
 	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
 	stw	r10, 0(r11)		/* and update pte in table */
 
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index c2ec13bea006..50ce83f20adb 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -578,39 +578,6 @@ pcibios_assign_resources(void)
 }
 
 
-int
-pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-	
-		r = &dev->resource[idx];
-		if (r->flags & IORESOURCE_UNSET) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		cmd |= PCI_COMMAND_MEMORY;
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 static int next_controller_index;
 
 struct pci_controller * __init
@@ -785,33 +752,11 @@ pcibios_update_irq(struct pci_dev *dev, int irq)
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
 	if (ppc_md.pcibios_enable_device_hook)
 		if (ppc_md.pcibios_enable_device_hook(dev, 0))
 			return -EINVAL;
-		
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx<6; idx++) {
-		r = &dev->resource[idx];
-		if (r->flags & IORESOURCE_UNSET) {
-			printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+
+	return pci_enable_resources(dev, mask);
 }
 
 struct pci_controller*
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index c35350250cfc..2ba659f401be 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -12,7 +12,6 @@
 #include <linux/irq.h>
 #include <linux/pci.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/pm.h>
 #include <linux/bitops.h>
 
@@ -124,10 +123,6 @@ EXPORT_SYMBOL(__ioremap);
 EXPORT_SYMBOL(iounmap);
 EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-EXPORT_SYMBOL(ppc_ide_md);
-#endif
-
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL(isa_io_base);
 EXPORT_SYMBOL(isa_mem_base);
diff --git a/arch/ppc/kernel/semaphore.c b/arch/ppc/kernel/semaphore.c
deleted file mode 100644
index 2fe429b27c14..000000000000
--- a/arch/ppc/kernel/semaphore.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * PowerPC-specific semaphore code.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * April 2001 - Reworked by Paul Mackerras <paulus@samba.org>
- * to eliminate the SMP races in the old version between the updates
- * of `count' and `waking'.  Now we use negative `count' values to
- * indicate that some process(es) are waiting for the semaphore.
- */
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- *	old_count = sem->count;
- *	tmp = MAX(old_count, 0) + incr;
- *	sem->count = tmp;
- *	return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
-	int old_count, tmp;
-
-	__asm__ __volatile__("\n"
-"1:	lwarx	%0,0,%3\n"
-"	srawi	%1,%0,31\n"
-"	andc	%1,%0,%1\n"
-"	add	%1,%1,%4\n"
-	PPC405_ERR77(0,%3)
-"	stwcx.	%1,0,%3\n"
-"	bne	1b"
-	: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
-	: "r" (&sem->count), "r" (incr), "m" (sem->count)
-	: "cc");
-
-	return old_count;
-}
-
-void __up(struct semaphore *sem)
-{
-	/*
-	 * Note that we incremented count in up() before we came here,
-	 * but that was ineffective since the result was <= 0, and
-	 * any negative value of count is equivalent to 0.
-	 * This ends up setting count to 1, unless count is now > 0
-	 * (i.e. because some other cpu has called up() in the meantime),
-	 * in which case we just increment count.
-	 */
-	__sem_update_count(sem, 1);
-	wake_up(&sem->wait);
-}
-
-/*
- * Note that when we come in to __down or __down_interruptible,
- * we have already decremented count, but that decrement was
- * ineffective since the result was < 0, and any negative value
- * of count is equivalent to 0.
- * Thus it is only when we decrement count from some value > 0
- * that we have actually got the semaphore.
- */
-void __sched __down(struct semaphore *sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-	smp_wmb();
-
-	/*
-	 * Try to get the semaphore.  If the count is > 0, then we've
-	 * got the semaphore; we decrement count and exit the loop.
-	 * If the count is 0 or negative, we set it to -1, indicating
-	 * that we are asleep, and then sleep.
-	 */
-	while (__sem_update_count(sem, -1) <= 0) {
-		schedule();
-		tsk->state = TASK_UNINTERRUPTIBLE;
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-
-	/*
-	 * If there are any more sleepers, wake one of them up so
-	 * that it can either get the semaphore, or set count to -1
-	 * indicating that there are still processes sleeping.
-	 */
-	wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	tsk->state = TASK_INTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-	smp_wmb();
-
-	while (__sem_update_count(sem, -1) <= 0) {
-		if (signal_pending(current)) {
-			/*
-			 * A signal is pending - give up trying.
-			 * Set sem->count to 0 if it is negative,
-			 * since we are no longer sleeping.
-			 */
-			__sem_update_count(sem, 0);
-			retval = -EINTR;
-			break;
-		}
-		schedule();
-		tsk->state = TASK_INTERRUPTIBLE;
-	}
-	tsk->state = TASK_RUNNING;
-	remove_wait_queue(&sem->wait, &wait);
-	wake_up(&sem->wait);
-	return retval;
-}
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index 294055902f0c..bfddfdee0b65 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -10,7 +10,6 @@
 #include <linux/reboot.h>
 #include <linux/delay.h>
 #include <linux/initrd.h>
-#include <linux/ide.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
@@ -57,7 +56,6 @@ extern void ppc6xx_idle(void);
 extern void power4_idle(void);
 
 extern boot_infos_t *boot_infos;
-struct ide_machdep_calls ppc_ide_md;
 
 /* Used with the BI_MEMSIZE bootinfo parameter to store the memory
    size value reported by the boot loader. */
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
index 7444df3889c5..1a63711081b5 100644
--- a/arch/ppc/mm/init.c
+++ b/arch/ppc/mm/init.c
@@ -109,7 +109,6 @@ void show_mem(void)
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	i = max_mapnr;
 	while (i-- > 0) {
 		total++;
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
index 017623c9bc4b..01f20f4c14fe 100644
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ b/arch/ppc/platforms/4xx/bamboo.c
@@ -22,7 +22,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
index 453643a0eeea..8027a36fc5bb 100644
--- a/arch/ppc/platforms/4xx/ebony.c
+++ b/arch/ppc/platforms/4xx/ebony.c
@@ -25,7 +25,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
index b79ebb8a3e6c..f6d8c2e8b6b7 100644
--- a/arch/ppc/platforms/4xx/luan.c
+++ b/arch/ppc/platforms/4xx/luan.c
@@ -23,7 +23,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
index 28a712cd4800..308386ef6f77 100644
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ b/arch/ppc/platforms/4xx/ocotea.c
@@ -23,7 +23,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
index f6a0c6650f33..115694275083 100644
--- a/arch/ppc/platforms/4xx/taishan.c
+++ b/arch/ppc/platforms/4xx/taishan.c
@@ -23,7 +23,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
index 66a44ff0d926..f6cfd44281fc 100644
--- a/arch/ppc/platforms/4xx/yucca.c
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -24,7 +24,6 @@
 #include <linux/blkdev.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/initrd.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
index dcd6070b85eb..27c140f218ed 100644
--- a/arch/ppc/platforms/chestnut.c
+++ b/arch/ppc/platforms/chestnut.c
@@ -22,7 +22,6 @@
 #include <linux/initrd.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/ide.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 #include <linux/serial_8250.h>
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
index e78bccf96c9d..07f672d58767 100644
--- a/arch/ppc/platforms/cpci690.c
+++ b/arch/ppc/platforms/cpci690.c
@@ -10,7 +10,6 @@
  */
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <linux/ide.h>
 #include <linux/irq.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
index c1f77e1d368e..f522b31c46d7 100644
--- a/arch/ppc/platforms/ev64260.c
+++ b/arch/ppc/platforms/ev64260.c
@@ -23,7 +23,6 @@
 
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <linux/ide.h>
 #include <linux/irq.h>
 #include <linux/fs.h>
 #include <linux/seq_file.h>
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
index ca5de13712fd..904b518c152e 100644
--- a/arch/ppc/platforms/hdpu.c
+++ b/arch/ppc/platforms/hdpu.c
@@ -16,7 +16,6 @@
 #include <linux/pci.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/platform_device.h>
 
@@ -604,41 +603,6 @@ static void parse_bootinfo(unsigned long r3,
 	}
 }
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-static void
-hdpu_ide_request_region(ide_ioreg_t from, unsigned int extent, const char *name)
-{
-	request_region(from, extent, name);
-	return;
-}
-
-static void hdpu_ide_release_region(ide_ioreg_t from, unsigned int extent)
-{
-	release_region(from, extent);
-	return;
-}
-
-static void __init
-hdpu_ide_pci_init_hwif_ports(hw_regs_t * hw, ide_ioreg_t data_port,
-			     ide_ioreg_t ctrl_port, int *irq)
-{
-	struct pci_dev *dev;
-
-	pci_for_each_dev(dev) {
-		if (((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) ||
-		    ((dev->class >> 8) == PCI_CLASS_STORAGE_RAID)) {
-			hw->irq = dev->irq;
-
-			if (irq != NULL) {
-				*irq = dev->irq;
-			}
-		}
-	}
-
-	return;
-}
-#endif
-
 void hdpu_heartbeat(void)
 {
 	if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5))
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
index b947c774f524..1e3aa6e9b6c7 100644
--- a/arch/ppc/platforms/lopec.c
+++ b/arch/ppc/platforms/lopec.c
@@ -15,7 +15,6 @@
 #include <linux/pci_ids.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/initrd.h>
 #include <linux/console.h>
@@ -168,85 +167,6 @@ lopec_power_off(void)
 	lopec_halt();
 }
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-int lopec_ide_ports_known = 0;
-static unsigned long lopec_ide_regbase[MAX_HWIFS];
-static unsigned long lopec_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long lopec_idedma_regbase;
-
-static void
-lopec_ide_probe(void)
-{
-	struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-					      PCI_DEVICE_ID_WINBOND_82C105,
-					      NULL);
-	lopec_ide_ports_known = 1;
-
-	if (dev) {
-		lopec_ide_regbase[0] = dev->resource[0].start;
-		lopec_ide_regbase[1] = dev->resource[2].start;
-		lopec_ide_ctl_regbase[0] = dev->resource[1].start;
-		lopec_ide_ctl_regbase[1] = dev->resource[3].start;
-		lopec_idedma_regbase = dev->resource[4].start;
-		pci_dev_put(dev);
-	}
-}
-
-static int
-lopec_ide_default_irq(unsigned long base)
-{
-	if (lopec_ide_ports_known == 0)
-		lopec_ide_probe();
-
-	if (base == lopec_ide_regbase[0])
-		return 14;
-	else if (base == lopec_ide_regbase[1])
-		return 15;
-	else
-		return 0;
-}
-
-static unsigned long
-lopec_ide_default_io_base(int index)
-{
-	if (lopec_ide_ports_known == 0)
-		lopec_ide_probe();
-	return lopec_ide_regbase[index];
-}
-
-static void __init
-lopec_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data,
-			  unsigned long ctl, int *irq)
-{
-	unsigned long reg = data;
-	uint alt_status_base;
-	int i;
-
-	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
-		hw->io_ports[i] = reg++;
-
-	if (data == lopec_ide_regbase[0]) {
-		alt_status_base = lopec_ide_ctl_regbase[0] + 2;
-		hw->irq = 14;
-	} else if (data == lopec_ide_regbase[1]) {
-		alt_status_base = lopec_ide_ctl_regbase[1] + 2;
-		hw->irq = 15;
-	} else {
-		alt_status_base = 0;
-		hw->irq = 0;
-	}
-
-	if (ctl)
-		hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
-	else
-		hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
-
-	if (irq != NULL)
-		*irq = hw->irq;
-
-}
-#endif /* BLK_DEV_IDE */
-
 static void __init
 lopec_init_IRQ(void)
 {
@@ -384,11 +304,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.nvram_read_val = todc_direct_read_val;
 	ppc_md.nvram_write_val = todc_direct_write_val;
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-	ppc_ide_md.default_irq = lopec_ide_default_irq;
-	ppc_ide_md.default_io_base = lopec_ide_default_io_base;
-	ppc_ide_md.ide_init_hwif = lopec_ide_init_hwif_ports;
-#endif
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	ppc_md.progress = gen550_progress;
 #endif
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
index bb8d4a45437a..053b54ac88f2 100644
--- a/arch/ppc/platforms/mvme5100.c
+++ b/arch/ppc/platforms/mvme5100.c
@@ -17,7 +17,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/kdev_t.h>
 #include <linux/root_dev.h>
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
index 4d46650e07fd..162dc85ff7be 100644
--- a/arch/ppc/platforms/powerpmc250.c
+++ b/arch/ppc/platforms/powerpmc250.c
@@ -25,7 +25,6 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
-#include <linux/ide.h>
 #include <linux/root_dev.h>
 
 #include <asm/byteorder.h>
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
index 8a1788c48155..cbcac85c7a78 100644
--- a/arch/ppc/platforms/pplus.c
+++ b/arch/ppc/platforms/pplus.c
@@ -19,7 +19,6 @@
 #include <linux/ioport.h>
 #include <linux/console.h>
 #include <linux/pci.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 
@@ -668,57 +667,6 @@ static void __init pplus_init_IRQ(void)
 		ppc_md.progress("init_irq: exit", 0);
 }
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int pplus_ide_default_irq(unsigned long base)
-{
-	switch (base) {
-	case 0x1f0:
-		return 14;
-	case 0x170:
-		return 15;
-	default:
-		return 0;
-	}
-}
-
-static unsigned long pplus_ide_default_io_base(int index)
-{
-	switch (index) {
-	case 0:
-		return 0x1f0;
-	case 1:
-		return 0x170;
-	default:
-		return 0;
-	}
-}
-
-static void __init
-pplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
-			  unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	int i;
-
-	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
-		hw->io_ports[i] = reg;
-		reg += 1;
-	}
-
-	if (ctrl_port)
-		hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
-	else
-		hw->io_ports[IDE_CONTROL_OFFSET] =
-		    hw->io_ports[IDE_DATA_OFFSET] + 0x206;
-
-	if (irq != NULL)
-		*irq = pplus_ide_default_irq(data_port);
-}
-#endif
-
 #ifdef CONFIG_SMP
 /* PowerPlus (MTX) support */
 static int __init smp_pplus_probe(void)
@@ -884,12 +832,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.find_end_of_memory = pplus_find_end_of_memory;
 	ppc_md.setup_io_mappings = pplus_map_io;
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-	ppc_ide_md.default_irq = pplus_ide_default_irq;
-	ppc_ide_md.default_io_base = pplus_ide_default_io_base;
-	ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports;
-#endif
-
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	ppc_md.progress = gen550_progress;
 #endif				/* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
index 38449855d5ff..465b658c927d 100644
--- a/arch/ppc/platforms/prep_setup.c
+++ b/arch/ppc/platforms/prep_setup.c
@@ -33,7 +33,6 @@
 #include <linux/console.h>
 #include <linux/timex.h>
 #include <linux/pci.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 
@@ -894,38 +893,6 @@ prep_init_IRQ(void)
 		i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
 }
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE stuff.
- */
-static int
-prep_ide_default_irq(unsigned long base)
-{
-	switch (base) {
-		case 0x1f0: return 13;
-		case 0x170: return 13;
-		case 0x1e8: return 11;
-		case 0x168: return 10;
-		case 0xfff0: return 14;		/* MCP(N)750 ide0 */
-		case 0xffe0: return 15;		/* MCP(N)750 ide1 */
-		default: return 0;
-	}
-}
-
-static unsigned long
-prep_ide_default_io_base(int index)
-{
-	switch (index) {
-		case 0: return 0x1f0;
-		case 1: return 0x170;
-		case 2: return 0x1e8;
-		case 3: return 0x168;
-		default:
-			return 0;
-	}
-}
-#endif
-
 #ifdef CONFIG_SMP
 /* PReP (MTX) support */
 static int __init
@@ -1070,11 +1037,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	ppc_md.setup_io_mappings = prep_map_io;
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-	ppc_ide_md.default_irq = prep_ide_default_irq;
-	ppc_ide_md.default_io_base = prep_ide_default_io_base;
-#endif
-
 #ifdef CONFIG_SMP
 	smp_ops			 = &prep_smp_ops;
 #endif /* CONFIG_SMP */
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
index fcab513e206d..93bd593cf957 100644
--- a/arch/ppc/platforms/prpmc750.c
+++ b/arch/ppc/platforms/prpmc750.c
@@ -22,7 +22,6 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/ide.h>
 #include <linux/root_dev.h>
 #include <linux/slab.h>
 #include <linux/serial_reg.h>
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
index f4ade5cd7a88..5bcda7f92cd0 100644
--- a/arch/ppc/platforms/prpmc800.c
+++ b/arch/ppc/platforms/prpmc800.c
@@ -20,7 +20,6 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/ide.h>
 #include <linux/root_dev.h>
 #include <linux/harrier_defs.h>
 
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
index 44d4398a36ff..f1dee1e87809 100644
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ b/arch/ppc/platforms/radstone_ppc7d.c
@@ -29,7 +29,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -512,7 +511,7 @@ static void __init ppc7d_init_irq(void)
 {
 	int irq;
 
-	pr_debug("%s\n", __FUNCTION__);
+	pr_debug("%s\n", __func__);
 	i8259_init(0, 0);
 	mv64360_init_irq();
 
@@ -569,7 +568,7 @@ static int __init ppc7d_map_irq(struct pci_dev *dev, unsigned char idsel,
 	};
 	const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
 
-	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __FUNCTION__,
+	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
 		 dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
 
 	return PCI_IRQ_TABLE_LOOKUP;
@@ -1300,7 +1299,7 @@ static void ppc7d_init2(void)
 	u32 data;
 	u8 data8;
 
-	pr_debug("%s: enter\n", __FUNCTION__);
+	pr_debug("%s: enter\n", __func__);
 
 	/* Wait for debugger? */
 	if (ppc7d_wait_debugger) {
@@ -1333,7 +1332,7 @@ static void ppc7d_init2(void)
         ppc_md.set_rtc_time = ppc7d_set_rtc_time;
         ppc_md.get_rtc_time = ppc7d_get_rtc_time;
 
-	pr_debug("%s: exit\n", __FUNCTION__);
+	pr_debug("%s: exit\n", __func__);
 }
 
 /* Called from machine_init(), early, before any of the __init functions
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index c9911601cfdf..18495e754e30 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,7 +38,6 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/pci.h>
-#include <linux/ide.h>
 
 #include <asm/sections.h>
 #include <asm/mmu.h>
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
index 3352fae1c722..b4897bdb742a 100644
--- a/arch/ppc/platforms/sandpoint.c
+++ b/arch/ppc/platforms/sandpoint.c
@@ -71,7 +71,6 @@
 #include <linux/initrd.h>
 #include <linux/console.h>
 #include <linux/delay.h>
-#include <linux/ide.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
@@ -559,93 +558,6 @@ sandpoint_show_cpuinfo(struct seq_file *m)
 	return 0;
 }
 
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-/*
- * IDE support.
- */
-static int		sandpoint_ide_ports_known = 0;
-static unsigned long	sandpoint_ide_regbase[MAX_HWIFS];
-static unsigned long	sandpoint_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long	sandpoint_idedma_regbase;
-
-static void
-sandpoint_ide_probe(void)
-{
-	struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-			PCI_DEVICE_ID_WINBOND_82C105, NULL);
-
-	if (pdev) {
-		sandpoint_ide_regbase[0]=pdev->resource[0].start;
-		sandpoint_ide_regbase[1]=pdev->resource[2].start;
-		sandpoint_ide_ctl_regbase[0]=pdev->resource[1].start;
-		sandpoint_ide_ctl_regbase[1]=pdev->resource[3].start;
-		sandpoint_idedma_regbase=pdev->resource[4].start;
-		pci_dev_put(pdev);
-	}
-
-	sandpoint_ide_ports_known = 1;
-}
-
-static int
-sandpoint_ide_default_irq(unsigned long base)
-{
-	if (sandpoint_ide_ports_known == 0)
-		sandpoint_ide_probe();
-
-	if (base == sandpoint_ide_regbase[0])
-		return SANDPOINT_IDE_INT0;
-	else if (base == sandpoint_ide_regbase[1])
-		return SANDPOINT_IDE_INT1;
-	else
-		return 0;
-}
-
-static unsigned long
-sandpoint_ide_default_io_base(int index)
-{
-	if (sandpoint_ide_ports_known == 0)
-		sandpoint_ide_probe();
-
-	return sandpoint_ide_regbase[index];
-}
-
-static void __init
-sandpoint_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
-		unsigned long ctrl_port, int *irq)
-{
-	unsigned long reg = data_port;
-	uint	alt_status_base;
-	int	i;
-
-	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
-		hw->io_ports[i] = reg++;
-	}
-
-	if (data_port == sandpoint_ide_regbase[0]) {
-		alt_status_base = sandpoint_ide_ctl_regbase[0] + 2;
-		hw->irq = 14;
-	}
-	else if (data_port == sandpoint_ide_regbase[1]) {
-		alt_status_base = sandpoint_ide_ctl_regbase[1] + 2;
-		hw->irq = 15;
-	}
-	else {
-		alt_status_base = 0;
-		hw->irq = 0;
-	}
-
-	if (ctrl_port) {
-		hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
-	} else {
-		hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
-	}
-
-	if (irq != NULL) {
-		*irq = hw->irq;
-	}
-}
-#endif
-
 /*
  * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
  */
@@ -736,10 +648,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	ppc_md.progress = gen550_progress;
 #endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-	ppc_ide_md.default_irq = sandpoint_ide_default_irq;
-	ppc_ide_md.default_io_base = sandpoint_ide_default_io_base;
-	ppc_ide_md.ide_init_hwif = sandpoint_ide_init_hwif_ports;
-#endif
 }
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h
index 3b64e6418489..ed83759e4044 100644
--- a/arch/ppc/platforms/sandpoint.h
+++ b/arch/ppc/platforms/sandpoint.h
@@ -28,9 +28,6 @@
  */
 #define SANDPOINT_IDE_INT0		23	/* EPIC 7 */
 #define SANDPOINT_IDE_INT1		24	/* EPIC 8 */
-#else
-#define SANDPOINT_IDE_INT0		14	/* 8259 Test */
-#define SANDPOINT_IDE_INT1		15	/* 8259 Test */
 #endif
 
 /*
diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c
index cc0935ccab7a..0df6aacb8237 100644
--- a/arch/ppc/platforms/sbc82xx.c
+++ b/arch/ppc/platforms/sbc82xx.c
@@ -121,8 +121,10 @@ struct hw_interrupt_type sbc82xx_i8259_ic = {
 	.end = sbc82xx_i8259_end_irq,
 };
 
-static irqreturn_t sbc82xx_i8259_demux(int irq, void *dev_id)
+static irqreturn_t sbc82xx_i8259_demux(int dummy, void *dev_id)
 {
+	int irq;
+
 	spin_lock(&sbc82xx_i8259_lock);
 
 	sbc82xx_i8259_map[0] = 0x0c;	/* OCW3: Read IR register on RD# pulse */
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
index f4de50ba292e..a344134f14b8 100644
--- a/arch/ppc/platforms/spruce.c
+++ b/arch/ppc/platforms/spruce.c
@@ -22,7 +22,6 @@
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/seq_file.h>
-#include <linux/ide.h>
 #include <linux/root_dev.h>
 #include <linux/serial.h>
 #include <linux/tty.h>
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
index 9caf850c9b38..19749e9bcf91 100644
--- a/arch/ppc/syslib/m8xx_setup.c
+++ b/arch/ppc/syslib/m8xx_setup.c
@@ -87,8 +87,6 @@ void m8xx_calibrate_decr(void);
 
 unsigned char __res[sizeof(bd_t)];
 
-extern void m8xx_ide_init(void);
-
 extern unsigned long find_available_memory(void);
 extern void m8xx_cpm_reset(void);
 extern void m8xx_wdt_handler_install(bd_t *bp);
@@ -474,8 +472,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
 	ppc_md.setup_io_mappings	= m8xx_map_io;
-
-#if defined(CONFIG_BLK_DEV_MPC8xx_IDE)
-	m8xx_ide_init();
-#endif
 }
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
index 9f504fc7693e..ab0cf4ced9e5 100644
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ b/arch/ppc/syslib/mpc52xx_setup.c
@@ -279,7 +279,7 @@ int mpc52xx_match_psc_function(int psc_idx, const char *func)
 
 int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
 {
-	static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+	static DEFINE_SPINLOCK(lock);
 	struct mpc52xx_cdm __iomem *cdm;
 	unsigned long flags;
 	u16 mclken_div;
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
index ac80370ed2f7..a6fb7dcfa738 100644
--- a/arch/ppc/syslib/ocp.c
+++ b/arch/ppc/syslib/ocp.c
@@ -49,7 +49,6 @@
 #include <asm/io.h>
 #include <asm/ocp.h>
 #include <asm/errno.h>
-#include <asm/semaphore.h>
 
 //#define DBG(x)	printk x
 #define DBG(x)
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
index debe14c083a1..353d746b47e1 100644
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ b/arch/ppc/syslib/ppc4xx_setup.c
@@ -24,7 +24,6 @@
 #include <linux/pci.h>
 #include <linux/rtc.h>
 #include <linux/console.h>
-#include <linux/ide.h>
 #include <linux/serial_reg.h>
 #include <linux/seq_file.h>
 
@@ -189,24 +188,6 @@ ppc4xx_calibrate_decr(void)
 	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
 }
 
-/*
- * IDE stuff.
- * should be generic for every IDE PCI chipset
- */
-#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
-static void
-ppc4xx_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
-			   unsigned long ctrl_port, int *irq)
-{
-	int i;
-
-	for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; ++i)
-		hw->io_ports[i] = data_port + i - IDE_DATA_OFFSET;
-
-	hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
-
 TODC_ALLOC();
 
 /*
@@ -271,10 +252,6 @@ ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	ppc_md.progress = gen550_progress;
 #endif
-
-#if defined(CONFIG_PCI) && defined(CONFIG_IDE)
-	ppc_ide_md.ide_init_hwif = ppc4xx_ide_init_hwif_ports;
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_IDE) */
 }
 
 /* Called from machine_check_exception */
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index b21444b681b6..f6a68e178fc5 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -3,6 +3,10 @@
 # see Documentation/kbuild/kconfig-language.txt.
 #
 
+config SCHED_MC
+	def_bool y
+	depends on SMP
+
 config MMU
 	def_bool y
 
@@ -39,6 +43,9 @@ config GENERIC_HWEIGHT
 config GENERIC_TIME
 	def_bool y
 
+config GENERIC_CLOCKEVENTS
+	def_bool y
+
 config GENERIC_BUG
 	bool
 	depends on BUG
@@ -61,6 +68,7 @@ config S390
 	def_bool y
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
+	select HAVE_KRETPROBES
 
 source "init/Kconfig"
 
@@ -68,6 +76,8 @@ menu "Base setup"
 
 comment "Processor type and features"
 
+source "kernel/time/Kconfig"
+
 config 64BIT
 	bool "64 bit kernel"
 	help
@@ -300,10 +310,7 @@ config QDIO
 	tristate "QDIO support"
 	---help---
 	  This driver provides the Queued Direct I/O base support for
-	  IBM mainframes.
-
-	  For details please refer to the documentation provided by IBM at
-	  <http://www10.software.ibm.com/developerworks/opensource/linux390>
+	  IBM System z.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called qdio.
@@ -350,6 +357,10 @@ endchoice
 
 source "fs/Kconfig.binfmt"
 
+config FORCE_MAX_ZONEORDER
+	int
+	default "9"
+
 config PROCESS_DEBUG
 	bool "Show crashed user process info"
 	help
@@ -481,25 +492,6 @@ config APPLDATA_NET_SUM
 
 source kernel/Kconfig.hz
 
-config NO_IDLE_HZ
-	bool "No HZ timer ticks in idle"
-	help
-	  Switches the regular HZ timer off when the system is going idle.
-	  This helps z/VM to detect that the Linux system is idle. VM can
-	  then "swap-out" this guest which reduces memory usage. It also
-	  reduces the overhead of idle systems.
-
-	  The HZ timer can be switched on/off via /proc/sys/kernel/hz_timer.
-	  hz_timer=0 means HZ timer is disabled. hz_timer=1 means HZ
-	  timer is active.
-
-config NO_IDLE_HZ_INIT
-	bool "HZ timer in idle off by default"
-	depends on NO_IDLE_HZ
-	help
-	  The HZ timer is switched off in idle by default. That means the
-	  HZ timer is already disabled at boot time.
-
 config S390_HYPFS_FS
 	bool "s390 hypervisor file system support"
 	select SYS_HYPERVISOR
diff --git a/arch/s390/crypto/Makefile b/arch/s390/crypto/Makefile
index 14e552c5cc43..6a1157fa4f98 100644
--- a/arch/s390/crypto/Makefile
+++ b/arch/s390/crypto/Makefile
@@ -2,8 +2,9 @@
 # Cryptographic API
 #
 
-obj-$(CONFIG_CRYPTO_SHA1_S390) += sha1_s390.o
-obj-$(CONFIG_CRYPTO_SHA256_S390) += sha256_s390.o
+obj-$(CONFIG_CRYPTO_SHA1_S390) += sha1_s390.o sha_common.o
+obj-$(CONFIG_CRYPTO_SHA256_S390) += sha256_s390.o sha_common.o
+obj-$(CONFIG_CRYPTO_SHA512_S390) += sha512_s390.o sha_common.o
 obj-$(CONFIG_CRYPTO_DES_S390) += des_s390.o des_check_key.o
 obj-$(CONFIG_CRYPTO_AES_S390) += aes_s390.o
 obj-$(CONFIG_S390_PRNG) += prng.o
diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c
index a3f67f8b5427..e33f32b54c08 100644
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -499,7 +499,7 @@ static struct crypto_alg cbc_aes_alg = {
 	}
 };
 
-static int __init aes_init(void)
+static int __init aes_s390_init(void)
 {
 	int ret;
 
@@ -542,15 +542,15 @@ aes_err:
 	goto out;
 }
 
-static void __exit aes_fini(void)
+static void __exit aes_s390_fini(void)
 {
 	crypto_unregister_alg(&cbc_aes_alg);
 	crypto_unregister_alg(&ecb_aes_alg);
 	crypto_unregister_alg(&aes_alg);
 }
 
-module_init(aes_init);
-module_exit(aes_fini);
+module_init(aes_s390_init);
+module_exit(aes_s390_fini);
 
 MODULE_ALIAS("aes");
 
diff --git a/arch/s390/crypto/crypt_s390.h b/arch/s390/crypto/crypt_s390.h
index 95f5160df27f..9992f95ef992 100644
--- a/arch/s390/crypto/crypt_s390.h
+++ b/arch/s390/crypto/crypt_s390.h
@@ -82,6 +82,7 @@ enum crypt_s390_kimd_func {
 	KIMD_QUERY   = CRYPT_S390_KIMD | 0,
 	KIMD_SHA_1   = CRYPT_S390_KIMD | 1,
 	KIMD_SHA_256 = CRYPT_S390_KIMD | 2,
+	KIMD_SHA_512 = CRYPT_S390_KIMD | 3,
 };
 
 /*
@@ -92,6 +93,7 @@ enum crypt_s390_klmd_func {
 	KLMD_QUERY   = CRYPT_S390_KLMD | 0,
 	KLMD_SHA_1   = CRYPT_S390_KLMD | 1,
 	KLMD_SHA_256 = CRYPT_S390_KLMD | 2,
+	KLMD_SHA_512 = CRYPT_S390_KLMD | 3,
 };
 
 /*
diff --git a/arch/s390/crypto/des_s390.c b/arch/s390/crypto/des_s390.c
index ea22707f435f..4aba83b31596 100644
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -550,7 +550,7 @@ static struct crypto_alg cbc_des3_192_alg = {
 	}
 };
 
-static int init(void)
+static int des_s390_init(void)
 {
 	int ret = 0;
 
@@ -612,7 +612,7 @@ des_err:
 	goto out;
 }
 
-static void __exit fini(void)
+static void __exit des_s390_fini(void)
 {
 	crypto_unregister_alg(&cbc_des3_192_alg);
 	crypto_unregister_alg(&ecb_des3_192_alg);
@@ -625,8 +625,8 @@ static void __exit fini(void)
 	crypto_unregister_alg(&des_alg);
 }
 
-module_init(init);
-module_exit(fini);
+module_init(des_s390_init);
+module_exit(des_s390_fini);
 
 MODULE_ALIAS("des");
 MODULE_ALIAS("des3_ede");
diff --git a/arch/s390/crypto/sha.h b/arch/s390/crypto/sha.h
new file mode 100644
index 000000000000..1ceafa571eab
--- /dev/null
+++ b/arch/s390/crypto/sha.h
@@ -0,0 +1,35 @@
+/*
+ * Cryptographic API.
+ *
+ * s390 generic implementation of the SHA Secure Hash Algorithms.
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Jan Glauber (jang@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#ifndef _CRYPTO_ARCH_S390_SHA_H
+#define _CRYPTO_ARCH_S390_SHA_H
+
+#include <linux/crypto.h>
+#include <crypto/sha.h>
+
+/* must be big enough for the largest SHA variant */
+#define SHA_MAX_STATE_SIZE	16
+#define SHA_MAX_BLOCK_SIZE      SHA512_BLOCK_SIZE
+
+struct s390_sha_ctx {
+	u64 count;              /* message length in bytes */
+	u32 state[SHA_MAX_STATE_SIZE];
+	u8 buf[2 * SHA_MAX_BLOCK_SIZE];
+	int func;		/* KIMD function to use */
+};
+
+void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len);
+void s390_sha_final(struct crypto_tfm *tfm, u8 *out);
+
+#endif
diff --git a/arch/s390/crypto/sha1_s390.c b/arch/s390/crypto/sha1_s390.c
index 5a834f6578ab..b3cb5a89b00d 100644
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -29,16 +29,11 @@
 #include <crypto/sha.h>
 
 #include "crypt_s390.h"
-
-struct s390_sha1_ctx {
-	u64 count;		/* message length */
-	u32 state[5];
-	u8 buf[2 * SHA1_BLOCK_SIZE];
-};
+#include "sha.h"
 
 static void sha1_init(struct crypto_tfm *tfm)
 {
-	struct s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm);
 
 	sctx->state[0] = SHA1_H0;
 	sctx->state[1] = SHA1_H1;
@@ -46,79 +41,7 @@ static void sha1_init(struct crypto_tfm *tfm)
 	sctx->state[3] = SHA1_H3;
 	sctx->state[4] = SHA1_H4;
 	sctx->count = 0;
-}
-
-static void sha1_update(struct crypto_tfm *tfm, const u8 *data,
-			unsigned int len)
-{
-	struct s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-	unsigned int index;
-	int ret;
-
-	/* how much is already in the buffer? */
-	index = sctx->count & 0x3f;
-
-	sctx->count += len;
-
-	if (index + len < SHA1_BLOCK_SIZE)
-		goto store;
-
-	/* process one stored block */
-	if (index) {
-		memcpy(sctx->buf + index, data, SHA1_BLOCK_SIZE - index);
-		ret = crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buf,
-				      SHA1_BLOCK_SIZE);
-		BUG_ON(ret != SHA1_BLOCK_SIZE);
-		data += SHA1_BLOCK_SIZE - index;
-		len -= SHA1_BLOCK_SIZE - index;
-	}
-
-	/* process as many blocks as possible */
-	if (len >= SHA1_BLOCK_SIZE) {
-		ret = crypt_s390_kimd(KIMD_SHA_1, sctx->state, data,
-				      len & ~(SHA1_BLOCK_SIZE - 1));
-		BUG_ON(ret != (len & ~(SHA1_BLOCK_SIZE - 1)));
-		data += ret;
-		len -= ret;
-	}
-
-store:
-	/* anything left? */
-	if (len)
-		memcpy(sctx->buf + index , data, len);
-}
-
-/* Add padding and return the message digest. */
-static void sha1_final(struct crypto_tfm *tfm, u8 *out)
-{
-	struct s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
-	u64 bits;
-	unsigned int index, end;
-	int ret;
-
-	/* must perform manual padding */
-	index = sctx->count & 0x3f;
-	end =  (index < 56) ? SHA1_BLOCK_SIZE : (2 * SHA1_BLOCK_SIZE);
-
-	/* start pad with 1 */
-	sctx->buf[index] = 0x80;
-
-	/* pad with zeros */
-	index++;
-	memset(sctx->buf + index, 0x00, end - index - 8);
-
-	/* append message length */
-	bits = sctx->count * 8;
-	memcpy(sctx->buf + end - 8, &bits, sizeof(bits));
-
-	ret = crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buf, end);
-	BUG_ON(ret != end);
-
-	/* copy digest to out */
-	memcpy(out, sctx->state, SHA1_DIGEST_SIZE);
-
-	/* wipe context */
-	memset(sctx, 0, sizeof *sctx);
+	sctx->func = KIMD_SHA_1;
 }
 
 static struct crypto_alg alg = {
@@ -127,33 +50,31 @@ static struct crypto_alg alg = {
 	.cra_priority	=	CRYPT_S390_PRIORITY,
 	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
 	.cra_blocksize	=	SHA1_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha1_ctx),
+	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
 	.cra_module	=	THIS_MODULE,
 	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
 	.cra_u		=	{ .digest = {
 	.dia_digestsize	=	SHA1_DIGEST_SIZE,
 	.dia_init	=	sha1_init,
-	.dia_update	=	sha1_update,
-	.dia_final	=	sha1_final } }
+	.dia_update	=	s390_sha_update,
+	.dia_final	=	s390_sha_final } }
 };
 
-static int __init init(void)
+static int __init sha1_s390_init(void)
 {
 	if (!crypt_s390_func_available(KIMD_SHA_1))
 		return -EOPNOTSUPP;
-
 	return crypto_register_alg(&alg);
 }
 
-static void __exit fini(void)
+static void __exit sha1_s390_fini(void)
 {
 	crypto_unregister_alg(&alg);
 }
 
-module_init(init);
-module_exit(fini);
+module_init(sha1_s390_init);
+module_exit(sha1_s390_fini);
 
 MODULE_ALIAS("sha1");
-
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
diff --git a/arch/s390/crypto/sha256_s390.c b/arch/s390/crypto/sha256_s390.c
index ccf8633c4f65..19c03fb6ba7e 100644
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -22,16 +22,11 @@
 #include <crypto/sha.h>
 
 #include "crypt_s390.h"
-
-struct s390_sha256_ctx {
-	u64 count;		/* message length */
-	u32 state[8];
-	u8 buf[2 * SHA256_BLOCK_SIZE];
-};
+#include "sha.h"
 
 static void sha256_init(struct crypto_tfm *tfm)
 {
-	struct s390_sha256_ctx *sctx = crypto_tfm_ctx(tfm);
+	struct s390_sha_ctx *sctx = crypto_tfm_ctx(tfm);
 
 	sctx->state[0] = SHA256_H0;
 	sctx->state[1] = SHA256_H1;
@@ -42,79 +37,7 @@ static void sha256_init(struct crypto_tfm *tfm)
 	sctx->state[6] = SHA256_H6;
 	sctx->state[7] = SHA256_H7;
 	sctx->count = 0;
-}
-
-static void sha256_update(struct crypto_tfm *tfm, const u8 *data,
-			  unsigned int len)
-{
-	struct s390_sha256_ctx *sctx = crypto_tfm_ctx(tfm);
-	unsigned int index;
-	int ret;
-
-	/* how much is already in the buffer? */
-	index = sctx->count & 0x3f;
-
-	sctx->count += len;
-
-	if ((index + len) < SHA256_BLOCK_SIZE)
-		goto store;
-
-	/* process one stored block */
-	if (index) {
-		memcpy(sctx->buf + index, data, SHA256_BLOCK_SIZE - index);
-		ret = crypt_s390_kimd(KIMD_SHA_256, sctx->state, sctx->buf,
-				      SHA256_BLOCK_SIZE);
-		BUG_ON(ret != SHA256_BLOCK_SIZE);
-		data += SHA256_BLOCK_SIZE - index;
-		len -= SHA256_BLOCK_SIZE - index;
-	}
-
-	/* process as many blocks as possible */
-	if (len >= SHA256_BLOCK_SIZE) {
-		ret = crypt_s390_kimd(KIMD_SHA_256, sctx->state, data,
-				      len & ~(SHA256_BLOCK_SIZE - 1));
-		BUG_ON(ret != (len & ~(SHA256_BLOCK_SIZE - 1)));
-		data += ret;
-		len -= ret;
-	}
-
-store:
-	/* anything left? */
-	if (len)
-		memcpy(sctx->buf + index , data, len);
-}
-
-/* Add padding and return the message digest */
-static void sha256_final(struct crypto_tfm *tfm, u8 *out)
-{
-	struct s390_sha256_ctx *sctx = crypto_tfm_ctx(tfm);
-	u64 bits;
-	unsigned int index, end;
-	int ret;
-
-	/* must perform manual padding */
-	index = sctx->count & 0x3f;
-	end = (index < 56) ? SHA256_BLOCK_SIZE : (2 * SHA256_BLOCK_SIZE);
-
-	/* start pad with 1 */
-	sctx->buf[index] = 0x80;
-
-	/* pad with zeros */
-	index++;
-	memset(sctx->buf + index, 0x00, end - index - 8);
-
-	/* append message length */
-	bits = sctx->count * 8;
-	memcpy(sctx->buf + end - 8, &bits, sizeof(bits));
-
-	ret = crypt_s390_kimd(KIMD_SHA_256, sctx->state, sctx->buf, end);
-	BUG_ON(ret != end);
-
-	/* copy digest to out */
-	memcpy(out, sctx->state, SHA256_DIGEST_SIZE);
-
-	/* wipe context */
-	memset(sctx, 0, sizeof *sctx);
+	sctx->func = KIMD_SHA_256;
 }
 
 static struct crypto_alg alg = {
@@ -123,17 +46,17 @@ static struct crypto_alg alg = {
 	.cra_priority	=	CRYPT_S390_PRIORITY,
 	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
 	.cra_blocksize	=	SHA256_BLOCK_SIZE,
-	.cra_ctxsize	=	sizeof(struct s390_sha256_ctx),
+	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
 	.cra_module	=	THIS_MODULE,
 	.cra_list	=	LIST_HEAD_INIT(alg.cra_list),
 	.cra_u		=	{ .digest = {
 	.dia_digestsize	=	SHA256_DIGEST_SIZE,
 	.dia_init	=	sha256_init,
-	.dia_update	=	sha256_update,
-	.dia_final	=	sha256_final } }
+	.dia_update	=	s390_sha_update,
+	.dia_final	=	s390_sha_final } }
 };
 
-static int init(void)
+static int sha256_s390_init(void)
 {
 	if (!crypt_s390_func_available(KIMD_SHA_256))
 		return -EOPNOTSUPP;
@@ -141,15 +64,14 @@ static int init(void)
 	return crypto_register_alg(&alg);
 }
 
-static void __exit fini(void)
+static void __exit sha256_s390_fini(void)
 {
 	crypto_unregister_alg(&alg);
 }
 
-module_init(init);
-module_exit(fini);
+module_init(sha256_s390_init);
+module_exit(sha256_s390_fini);
 
 MODULE_ALIAS("sha256");
-
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm");
diff --git a/arch/s390/crypto/sha512_s390.c b/arch/s390/crypto/sha512_s390.c
new file mode 100644
index 000000000000..23c7861f6aeb
--- /dev/null
+++ b/arch/s390/crypto/sha512_s390.c
@@ -0,0 +1,114 @@
+/*
+ * Cryptographic API.
+ *
+ * s390 implementation of the SHA512 and SHA38 Secure Hash Algorithm.
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Jan Glauber (jang@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/crypto.h>
+
+#include "sha.h"
+#include "crypt_s390.h"
+
+static void sha512_init(struct crypto_tfm *tfm)
+{
+	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	*(__u64 *)&ctx->state[0] = 0x6a09e667f3bcc908ULL;
+	*(__u64 *)&ctx->state[2] = 0xbb67ae8584caa73bULL;
+	*(__u64 *)&ctx->state[4] = 0x3c6ef372fe94f82bULL;
+	*(__u64 *)&ctx->state[6] = 0xa54ff53a5f1d36f1ULL;
+	*(__u64 *)&ctx->state[8] = 0x510e527fade682d1ULL;
+	*(__u64 *)&ctx->state[10] = 0x9b05688c2b3e6c1fULL;
+	*(__u64 *)&ctx->state[12] = 0x1f83d9abfb41bd6bULL;
+	*(__u64 *)&ctx->state[14] = 0x5be0cd19137e2179ULL;
+	ctx->count = 0;
+	ctx->func = KIMD_SHA_512;
+}
+
+static struct crypto_alg sha512_alg = {
+	.cra_name	=	"sha512",
+	.cra_driver_name =	"sha512-s390",
+	.cra_priority	=	CRYPT_S390_PRIORITY,
+	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
+	.cra_blocksize	=	SHA512_BLOCK_SIZE,
+	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
+	.cra_module	=	THIS_MODULE,
+	.cra_list	=	LIST_HEAD_INIT(sha512_alg.cra_list),
+	.cra_u		=	{ .digest = {
+	.dia_digestsize	=	SHA512_DIGEST_SIZE,
+	.dia_init	=	sha512_init,
+	.dia_update	=	s390_sha_update,
+	.dia_final	=	s390_sha_final } }
+};
+
+MODULE_ALIAS("sha512");
+
+static void sha384_init(struct crypto_tfm *tfm)
+{
+	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+
+	*(__u64 *)&ctx->state[0] = 0xcbbb9d5dc1059ed8ULL;
+	*(__u64 *)&ctx->state[2] = 0x629a292a367cd507ULL;
+	*(__u64 *)&ctx->state[4] = 0x9159015a3070dd17ULL;
+	*(__u64 *)&ctx->state[6] = 0x152fecd8f70e5939ULL;
+	*(__u64 *)&ctx->state[8] = 0x67332667ffc00b31ULL;
+	*(__u64 *)&ctx->state[10] = 0x8eb44a8768581511ULL;
+	*(__u64 *)&ctx->state[12] = 0xdb0c2e0d64f98fa7ULL;
+	*(__u64 *)&ctx->state[14] = 0x47b5481dbefa4fa4ULL;
+	ctx->count = 0;
+	ctx->func = KIMD_SHA_512;
+}
+
+static struct crypto_alg sha384_alg = {
+	.cra_name	=	"sha384",
+	.cra_driver_name =	"sha384-s390",
+	.cra_priority	=	CRYPT_S390_PRIORITY,
+	.cra_flags	=	CRYPTO_ALG_TYPE_DIGEST,
+	.cra_blocksize	=	SHA384_BLOCK_SIZE,
+	.cra_ctxsize	=	sizeof(struct s390_sha_ctx),
+	.cra_module	=	THIS_MODULE,
+	.cra_list	=	LIST_HEAD_INIT(sha384_alg.cra_list),
+	.cra_u		=	{ .digest = {
+	.dia_digestsize	=	SHA384_DIGEST_SIZE,
+	.dia_init	=	sha384_init,
+	.dia_update	=	s390_sha_update,
+	.dia_final	=	s390_sha_final } }
+};
+
+MODULE_ALIAS("sha384");
+
+static int __init init(void)
+{
+	int ret;
+
+	if (!crypt_s390_func_available(KIMD_SHA_512))
+		return -EOPNOTSUPP;
+	if ((ret = crypto_register_alg(&sha512_alg)) < 0)
+		goto out;
+	if ((ret = crypto_register_alg(&sha384_alg)) < 0)
+		crypto_unregister_alg(&sha512_alg);
+out:
+	return ret;
+}
+
+static void __exit fini(void)
+{
+	crypto_unregister_alg(&sha512_alg);
+	crypto_unregister_alg(&sha384_alg);
+}
+
+module_init(init);
+module_exit(fini);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("SHA512 and SHA-384 Secure Hash Algorithm");
diff --git a/arch/s390/crypto/sha_common.c b/arch/s390/crypto/sha_common.c
new file mode 100644
index 000000000000..9d6eb8c3d37e
--- /dev/null
+++ b/arch/s390/crypto/sha_common.c
@@ -0,0 +1,97 @@
+/*
+ * Cryptographic API.
+ *
+ * s390 generic implementation of the SHA Secure Hash Algorithms.
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Jan Glauber (jang@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ */
+
+#include <linux/crypto.h>
+#include "sha.h"
+#include "crypt_s390.h"
+
+void s390_sha_update(struct crypto_tfm *tfm, const u8 *data, unsigned int len)
+{
+	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+	unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	unsigned int index;
+	int ret;
+
+	/* how much is already in the buffer? */
+	index = ctx->count & (bsize - 1);
+	ctx->count += len;
+
+	if ((index + len) < bsize)
+		goto store;
+
+	/* process one stored block */
+	if (index) {
+		memcpy(ctx->buf + index, data, bsize - index);
+		ret = crypt_s390_kimd(ctx->func, ctx->state, ctx->buf, bsize);
+		BUG_ON(ret != bsize);
+		data += bsize - index;
+		len -= bsize - index;
+	}
+
+	/* process as many blocks as possible */
+	if (len >= bsize) {
+		ret = crypt_s390_kimd(ctx->func, ctx->state, data,
+				      len & ~(bsize - 1));
+		BUG_ON(ret != (len & ~(bsize - 1)));
+		data += ret;
+		len -= ret;
+	}
+store:
+	if (len)
+		memcpy(ctx->buf + index , data, len);
+}
+EXPORT_SYMBOL_GPL(s390_sha_update);
+
+void s390_sha_final(struct crypto_tfm *tfm, u8 *out)
+{
+	struct s390_sha_ctx *ctx = crypto_tfm_ctx(tfm);
+	unsigned int bsize = crypto_tfm_alg_blocksize(tfm);
+	u64 bits;
+	unsigned int index, end, plen;
+	int ret;
+
+	/* SHA-512 uses 128 bit padding length */
+	plen = (bsize > SHA256_BLOCK_SIZE) ? 16 : 8;
+
+	/* must perform manual padding */
+	index = ctx->count & (bsize - 1);
+	end = (index < bsize - plen) ? bsize : (2 * bsize);
+
+	/* start pad with 1 */
+	ctx->buf[index] = 0x80;
+	index++;
+
+	/* pad with zeros */
+	memset(ctx->buf + index, 0x00, end - index - 8);
+
+	/*
+	 * Append message length. Well, SHA-512 wants a 128 bit lenght value,
+	 * nevertheless we use u64, should be enough for now...
+	 */
+	bits = ctx->count * 8;
+	memcpy(ctx->buf + end - 8, &bits, sizeof(bits));
+
+	ret = crypt_s390_kimd(ctx->func, ctx->state, ctx->buf, end);
+	BUG_ON(ret != end);
+
+	/* copy digest to out */
+	memcpy(out, ctx->state, crypto_hash_digestsize(crypto_hash_cast(tfm)));
+	/* wipe context */
+	memset(ctx, 0, sizeof *ctx);
+}
+EXPORT_SYMBOL_GPL(s390_sha_final);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("s390 SHA cipher common functions");
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index 39921f3a9685..a72f208e62d0 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,8 +1,9 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Sat Feb  9 12:13:01 2008
+# Linux kernel version: 2.6.25-rc4
+# Wed Mar  5 11:22:59 2008
 #
+CONFIG_SCHED_MC=y
 CONFIG_MMU=y
 CONFIG_ZONE_DMA=y
 CONFIG_LOCKDEP_SUPPORT=y
@@ -43,12 +44,15 @@ CONFIG_CGROUPS=y
 # CONFIG_CGROUP_DEBUG is not set
 CONFIG_CGROUP_NS=y
 # CONFIG_CPUSETS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUP_CPUACCT is not set
 # CONFIG_RESOURCE_COUNTERS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
@@ -85,7 +89,9 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -185,6 +191,7 @@ CONFIG_IPL=y
 CONFIG_IPL_VM=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
+CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PROCESS_DEBUG is not set
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
@@ -435,6 +442,7 @@ CONFIG_DASD_EER=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
 
 #
 # SCSI device support
@@ -530,11 +538,9 @@ CONFIG_CTC=m
 # CONFIG_SMSGIUCV is not set
 # CONFIG_CLAW is not set
 CONFIG_QETH=y
-
-#
-# Gigabit Ethernet default settings
-#
-# CONFIG_QETH_IPV6 is not set
+CONFIG_QETH_L2=y
+CONFIG_QETH_L3=y
+CONFIG_QETH_IPV6=y
 CONFIG_CCWGROUP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -593,6 +599,7 @@ CONFIG_S390_VMUR=m
 #
 # Sonics Silicon Backplane
 #
+# CONFIG_MEMSTICK is not set
 
 #
 # File systems
@@ -750,7 +757,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -759,6 +765,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
+# CONFIG_SAMPLE_KPROBES is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 
 #
diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile
index b3b650a93c7c..77051cd27925 100644
--- a/arch/s390/kernel/Makefile
+++ b/arch/s390/kernel/Makefile
@@ -4,9 +4,14 @@
 
 EXTRA_AFLAGS	:= -traditional
 
+#
+# Passing null pointers is ok for smp code, since we access the lowcore here.
+#
+CFLAGS_smp.o	:= -Wno-nonnull
+
 obj-y	:=  bitmap.o traps.o time.o process.o base.o early.o \
             setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
-	    semaphore.o s390_ext.o debug.o irq.o ipl.o dis.o diag.o
+	    s390_ext.o debug.o irq.o ipl.o dis.o diag.o
 
 obj-y	+= $(if $(CONFIG_64BIT),entry64.o,entry.o)
 obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
@@ -14,7 +19,7 @@ obj-y	+= $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
 extra-y				+= head.o init_task.o vmlinux.lds
 
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
-obj-$(CONFIG_SMP)		+= smp.o
+obj-$(CONFIG_SMP)		+= smp.o topology.o
 
 obj-$(CONFIG_AUDIT)		+= audit.o
 compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c
index 50b85d07ddd2..d7f22226fc4e 100644
--- a/arch/s390/kernel/compat_linux.c
+++ b/arch/s390/kernel/compat_linux.c
@@ -62,7 +62,6 @@
 
 #include <asm/types.h>
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 
 #include <net/scm.h>
 #include <net/sock.h>
diff --git a/arch/s390/kernel/compat_linux.h b/arch/s390/kernel/compat_linux.h
index e89f8c0c42a0..20723a062017 100644
--- a/arch/s390/kernel/compat_linux.h
+++ b/arch/s390/kernel/compat_linux.h
@@ -162,4 +162,77 @@ struct ucontext32 {
 	compat_sigset_t		uc_sigmask;	/* mask last for extensibility */
 };
 
+struct __sysctl_args32;
+struct stat64_emu31;
+struct mmap_arg_struct_emu31;
+struct fadvise64_64_args;
+struct old_sigaction32;
+struct old_sigaction32;
+
+long sys32_chown16(const char __user * filename, u16 user, u16 group);
+long sys32_lchown16(const char __user * filename, u16 user, u16 group);
+long sys32_fchown16(unsigned int fd, u16 user, u16 group);
+long sys32_setregid16(u16 rgid, u16 egid);
+long sys32_setgid16(u16 gid);
+long sys32_setreuid16(u16 ruid, u16 euid);
+long sys32_setuid16(u16 uid);
+long sys32_setresuid16(u16 ruid, u16 euid, u16 suid);
+long sys32_getresuid16(u16 __user *ruid, u16 __user *euid, u16 __user *suid);
+long sys32_setresgid16(u16 rgid, u16 egid, u16 sgid);
+long sys32_getresgid16(u16 __user *rgid, u16 __user *egid, u16 __user *sgid);
+long sys32_setfsuid16(u16 uid);
+long sys32_setfsgid16(u16 gid);
+long sys32_getgroups16(int gidsetsize, u16 __user *grouplist);
+long sys32_setgroups16(int gidsetsize, u16 __user *grouplist);
+long sys32_getuid16(void);
+long sys32_geteuid16(void);
+long sys32_getgid16(void);
+long sys32_getegid16(void);
+long sys32_ipc(u32 call, int first, int second, int third, u32 ptr);
+long sys32_truncate64(const char __user * path, unsigned long high,
+		      unsigned long low);
+long sys32_ftruncate64(unsigned int fd, unsigned long high, unsigned long low);
+long sys32_sched_rr_get_interval(compat_pid_t pid,
+				 struct compat_timespec __user *interval);
+long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
+			  compat_sigset_t __user *oset, size_t sigsetsize);
+long sys32_rt_sigpending(compat_sigset_t __user *set, size_t sigsetsize);
+long sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo);
+long sys32_execve(void);
+long sys32_init_module(void __user *umod, unsigned long len,
+		       const char __user *uargs);
+long sys32_delete_module(const char __user *name_user, unsigned int flags);
+long sys32_gettimeofday(struct compat_timeval __user *tv,
+			struct timezone __user *tz);
+long sys32_settimeofday(struct compat_timeval __user *tv,
+			struct timezone __user *tz);
+long sys32_pause(void);
+long sys32_pread64(unsigned int fd, char __user *ubuf, size_t count,
+		   u32 poshi, u32 poslo);
+long sys32_pwrite64(unsigned int fd, const char __user *ubuf,
+		    size_t count, u32 poshi, u32 poslo);
+compat_ssize_t sys32_readahead(int fd, u32 offhi, u32 offlo, s32 count);
+long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset,
+		    size_t count);
+long sys32_sendfile64(int out_fd, int in_fd, compat_loff_t __user *offset,
+		      s32 count);
+long sys32_sysctl(struct __sysctl_args32 __user *args);
+long sys32_stat64(char __user * filename, struct stat64_emu31 __user * statbuf);
+long sys32_lstat64(char __user * filename,
+		   struct stat64_emu31 __user * statbuf);
+long sys32_fstat64(unsigned long fd, struct stat64_emu31 __user * statbuf);
+long sys32_fstatat64(unsigned int dfd, char __user *filename,
+		     struct stat64_emu31 __user* statbuf, int flag);
+unsigned long old32_mmap(struct mmap_arg_struct_emu31 __user *arg);
+long sys32_mmap2(struct mmap_arg_struct_emu31 __user *arg);
+long sys32_read(unsigned int fd, char __user * buf, size_t count);
+long sys32_write(unsigned int fd, char __user * buf, size_t count);
+long sys32_clone(void);
+long sys32_fadvise64(int fd, loff_t offset, size_t len, int advise);
+long sys32_fadvise64_64(struct fadvise64_64_args __user *args);
+long sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
+		     struct old_sigaction32 __user *oact);
+long sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
+			struct sigaction32 __user *oact, size_t sigsetsize);
+long sys32_sigaltstack(const stack_t32 __user *uss, stack_t32 __user *uoss);
 #endif /* _ASM_S390X_S390_H */
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index a5692c460bad..c7f02e777af2 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -29,6 +29,7 @@
 #include <asm/lowcore.h>
 #include "compat_linux.h"
 #include "compat_ptrace.h"
+#include "entry.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
@@ -428,6 +429,10 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 	/* Default to using normal stack */
 	sp = (unsigned long) A(regs->gprs[15]);
 
+	/* Overflow on alternate signal stack gives SIGSEGV. */
+	if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
+		return (void __user *) -1UL;
+
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
 		if (! sas_ss_flags(sp))
@@ -461,6 +466,9 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(sigframe32)))
 		goto give_sigsegv;
 
+	if (frame == (void __user *) -1UL)
+		goto give_sigsegv;
+
 	if (__copy_to_user(&frame->sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE32))
 		goto give_sigsegv;
 
@@ -514,6 +522,9 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(rt_sigframe32)))
 		goto give_sigsegv;
 
+	if (frame == (void __user *) -1UL)
+		goto give_sigsegv;
+
 	if (copy_siginfo_to_user32(&frame->info, info))
 		goto give_sigsegv;
 
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index 1b2f5ce45320..dff0568e67ec 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -17,7 +17,6 @@
 #include <linux/ctype.h>
 #include <linux/sysctl.h>
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/fs.h>
@@ -73,7 +72,7 @@ static ssize_t debug_input(struct file *file, const char __user *user_buf,
 static int debug_open(struct inode *inode, struct file *file);
 static int debug_close(struct inode *inode, struct file *file);
 static debug_info_t*  debug_info_create(char *name, int pages_per_area,
-			int nr_areas, int buf_size);
+			int nr_areas, int buf_size, mode_t mode);
 static void debug_info_get(debug_info_t *);
 static void debug_info_put(debug_info_t *);
 static int debug_prolog_level_fn(debug_info_t * id,
@@ -157,7 +156,7 @@ struct debug_view debug_sprintf_view = {
 };
 
 /* used by dump analysis tools to determine version of debug feature */
-unsigned int debug_feature_version = __DEBUG_FEATURE_VERSION;
+static unsigned int __used debug_feature_version = __DEBUG_FEATURE_VERSION;
 
 /* static globals */
 
@@ -327,7 +326,8 @@ debug_info_free(debug_info_t* db_info){
  */
 
 static debug_info_t*
-debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size)
+debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size,
+		  mode_t mode)
 {
 	debug_info_t* rc;
 
@@ -336,6 +336,8 @@ debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size)
         if(!rc) 
 		goto out;
 
+	rc->mode = mode & ~S_IFMT;
+
 	/* create root directory */
         rc->debugfs_root_entry = debugfs_create_dir(rc->name,
 					debug_debugfs_root_entry);
@@ -676,23 +678,30 @@ debug_close(struct inode *inode, struct file *file)
 }
 
 /*
- * debug_register:
- * - creates and initializes debug area for the caller
- * - returns handle for debug area
+ * debug_register_mode:
+ * - Creates and initializes debug area for the caller
+ *   The mode parameter allows to specify access rights for the s390dbf files
+ * - Returns handle for debug area
  */
 
-debug_info_t*
-debug_register (char *name, int pages_per_area, int nr_areas, int buf_size)
+debug_info_t *debug_register_mode(char *name, int pages_per_area, int nr_areas,
+				  int buf_size, mode_t mode, uid_t uid,
+				  gid_t gid)
 {
 	debug_info_t *rc = NULL;
 
+	/* Since debugfs currently does not support uid/gid other than root, */
+	/* we do not allow gid/uid != 0 until we get support for that. */
+	if ((uid != 0) || (gid != 0))
+		printk(KERN_WARNING "debug: Warning - Currently only uid/gid "
+		       "= 0 are supported. Using root as owner now!");
 	if (!initialized)
 		BUG();
 	mutex_lock(&debug_mutex);
 
         /* create new debug_info */
 
-	rc = debug_info_create(name, pages_per_area, nr_areas, buf_size);
+	rc = debug_info_create(name, pages_per_area, nr_areas, buf_size, mode);
 	if(!rc) 
 		goto out;
 	debug_register_view(rc, &debug_level_view);
@@ -705,6 +714,20 @@ out:
 	mutex_unlock(&debug_mutex);
 	return rc;
 }
+EXPORT_SYMBOL(debug_register_mode);
+
+/*
+ * debug_register:
+ * - creates and initializes debug area for the caller
+ * - returns handle for debug area
+ */
+
+debug_info_t *debug_register(char *name, int pages_per_area, int nr_areas,
+			     int buf_size)
+{
+	return debug_register_mode(name, pages_per_area, nr_areas, buf_size,
+				   S_IRUSR | S_IWUSR, 0, 0);
+}
 
 /*
  * debug_unregister:
@@ -1073,15 +1096,16 @@ debug_register_view(debug_info_t * id, struct debug_view *view)
 	int rc = 0;
 	int i;
 	unsigned long flags;
-	mode_t mode = S_IFREG;
+	mode_t mode;
 	struct dentry *pde;
 
 	if (!id)
 		goto out;
-	if (view->prolog_proc || view->format_proc || view->header_proc)
-		mode |= S_IRUSR;
-	if (view->input_proc)
-		mode |= S_IWUSR;
+	mode = (id->mode | S_IFREG) & ~S_IXUGO;
+	if (!(view->prolog_proc || view->format_proc || view->header_proc))
+		mode &= ~(S_IRUSR | S_IRGRP | S_IROTH);
+	if (!view->input_proc)
+		mode &= ~(S_IWUSR | S_IWGRP | S_IWOTH);
 	pde = debugfs_create_file(view->name, mode, id->debugfs_root_entry,
 				id , &debug_file_ops);
 	if (!pde){
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index 9f7b73b180f0..540a67f979b6 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -21,6 +21,7 @@
 #include <asm/setup.h>
 #include <asm/cpcmd.h>
 #include <asm/sclp.h>
+#include "entry.h"
 
 /*
  * Create a Kernel NSS if the SAVESYS= parameter is defined
@@ -88,13 +89,17 @@ static noinline __init void create_kernel_nss(void)
 
 	__cpcmd(defsys_cmd, NULL, 0, &response);
 
-	if (response != 0)
+	if (response != 0) {
+		kernel_nss_name[0] = '\0';
 		return;
+	}
 
 	__cpcmd(savesys_cmd, NULL, 0, &response);
 
-	if (response != strlen(savesys_cmd))
+	if (response != strlen(savesys_cmd)) {
+		kernel_nss_name[0] = '\0';
 		return;
+	}
 
 	ipl_flags = IPL_NSS_VALID;
 }
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
new file mode 100644
index 000000000000..6b1896345eda
--- /dev/null
+++ b/arch/s390/kernel/entry.h
@@ -0,0 +1,60 @@
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/types.h>
+#include <linux/signal.h>
+#include <asm/ptrace.h>
+
+typedef void pgm_check_handler_t(struct pt_regs *, long);
+extern pgm_check_handler_t *pgm_check_table[128];
+pgm_check_handler_t do_protection_exception;
+pgm_check_handler_t do_dat_exception;
+
+extern int sysctl_userprocess_debug;
+
+void do_single_step(struct pt_regs *regs);
+void syscall_trace(struct pt_regs *regs, int entryexit);
+void kernel_stack_overflow(struct pt_regs * regs);
+void do_signal(struct pt_regs *regs);
+int handle_signal32(unsigned long sig, struct k_sigaction *ka,
+		    siginfo_t *info, sigset_t *oldset, struct pt_regs *regs);
+
+void do_extint(struct pt_regs *regs, unsigned short code);
+int __cpuinit start_secondary(void *cpuvoid);
+void __init startup_init(void);
+void die(const char * str, struct pt_regs * regs, long err);
+
+struct new_utsname;
+struct mmap_arg_struct;
+struct fadvise64_64_args;
+struct old_sigaction;
+struct sel_arg_struct;
+
+long sys_pipe(unsigned long __user *fildes);
+long sys_mmap2(struct mmap_arg_struct __user  *arg);
+long old_mmap(struct mmap_arg_struct __user *arg);
+long sys_ipc(uint call, int first, unsigned long second,
+	     unsigned long third, void __user *ptr);
+long s390x_newuname(struct new_utsname __user *name);
+long s390x_personality(unsigned long personality);
+long s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
+		    size_t len, int advice);
+long s390_fadvise64_64(struct fadvise64_64_args __user *args);
+long s390_fallocate(int fd, int mode, loff_t offset, u32 len_high, u32 len_low);
+long sys_fork(void);
+long sys_clone(void);
+long sys_vfork(void);
+void execve_tail(void);
+long sys_execve(void);
+int sys_sigsuspend(int history0, int history1, old_sigset_t mask);
+long sys_sigaction(int sig, const struct old_sigaction __user *act,
+		   struct old_sigaction __user *oact);
+long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss);
+long sys_sigreturn(void);
+long sys_rt_sigreturn(void);
+long sys32_sigreturn(void);
+long sys32_rt_sigreturn(void);
+long old_select(struct sel_arg_struct __user *arg);
+long sys_ptrace(long request, long pid, long addr, long data);
+
+#endif /* _ENTRY_H */
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index efde6e178f6c..cd959c0b2e16 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -475,6 +475,7 @@ pgm_check_handler:
 pgm_no_vtime:
 #endif
 	lg	%r9,__LC_THREAD_INFO	# load pointer to thread_info struct
+	mvc	SP_ARGS(8,%r15),__LC_LAST_BREAK
 	TRACE_IRQS_OFF
 	lgf	%r3,__LC_PGM_ILC	# load program interruption code
 	lghi	%r8,0x7f
@@ -847,6 +848,7 @@ stack_overflow:
 	je	0f
 	la	%r1,__LC_SAVE_AREA+32
 0:	mvc	SP_R12(32,%r15),0(%r1)	# move %r12-%r15 to stack
+	mvc	SP_ARGS(8,%r15),__LC_LAST_BREAK
 	xc	__SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain
 	la	%r2,SP_PTREGS(%r15)	# load pt_regs
 	jg	kernel_stack_overflow
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 60acdc266db1..532542447d66 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -655,7 +655,7 @@ static struct kobj_attribute reipl_type_attr =
 
 static struct kset *reipl_kset;
 
-void reipl_run(struct shutdown_trigger *trigger)
+static void reipl_run(struct shutdown_trigger *trigger)
 {
 	struct ccw_dev_id devid;
 	static char buf[100];
@@ -704,6 +704,7 @@ void reipl_run(struct shutdown_trigger *trigger)
 	default:
 		break;
 	}
+	disabled_wait((unsigned long) __builtin_return_address(0));
 }
 
 static void __init reipl_probe(void)
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index c5549a206284..ed04d1372d5d 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -360,7 +360,7 @@ no_kprobe:
  *	- When the probed function returns, this probe
  *		causes the handlers to fire
  */
-void kretprobe_trampoline_holder(void)
+static void __used kretprobe_trampoline_holder(void)
 {
 	asm volatile(".global kretprobe_trampoline\n"
 		     "kretprobe_trampoline: bcr 0,0\n");
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 1c59ec161cf8..c1aff194141d 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -36,6 +36,8 @@
 #include <linux/module.h>
 #include <linux/notifier.h>
 #include <linux/utsname.h>
+#include <linux/tick.h>
+#include <linux/elfcore.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -44,6 +46,7 @@
 #include <asm/irq.h>
 #include <asm/timer.h>
 #include <asm/cpu.h>
+#include "entry.h"
 
 asmlinkage void ret_from_fork(void) asm ("ret_from_fork");
 
@@ -76,6 +79,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
  * Need to know about CPUs going idle?
  */
 static ATOMIC_NOTIFIER_HEAD(idle_chain);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
 
 int register_idle_notifier(struct notifier_block *nb)
 {
@@ -89,9 +93,33 @@ int unregister_idle_notifier(struct notifier_block *nb)
 }
 EXPORT_SYMBOL(unregister_idle_notifier);
 
-void do_monitor_call(struct pt_regs *regs, long interruption_code)
+static int s390_idle_enter(void)
+{
+	struct s390_idle_data *idle;
+	int nr_calls = 0;
+	void *hcpu;
+	int rc;
+
+	hcpu = (void *)(long)smp_processor_id();
+	rc = __atomic_notifier_call_chain(&idle_chain, S390_CPU_IDLE, hcpu, -1,
+					  &nr_calls);
+	if (rc == NOTIFY_BAD) {
+		nr_calls--;
+		__atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
+					     hcpu, nr_calls, NULL);
+		return rc;
+	}
+	idle = &__get_cpu_var(s390_idle);
+	spin_lock(&idle->lock);
+	idle->idle_count++;
+	idle->in_idle = 1;
+	idle->idle_enter = get_clock();
+	spin_unlock(&idle->lock);
+	return NOTIFY_OK;
+}
+
+void s390_idle_leave(void)
 {
-#ifdef CONFIG_SMP
 	struct s390_idle_data *idle;
 
 	idle = &__get_cpu_var(s390_idle);
@@ -99,10 +127,6 @@ void do_monitor_call(struct pt_regs *regs, long interruption_code)
 	idle->idle_time += get_clock() - idle->idle_enter;
 	idle->in_idle = 0;
 	spin_unlock(&idle->lock);
-#endif
-	/* disable monitor call class 0 */
-	__ctl_clear_bit(8, 15);
-
 	atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
 				   (void *)(long) smp_processor_id());
 }
@@ -113,57 +137,30 @@ extern void s390_handle_mcck(void);
  */
 static void default_idle(void)
 {
-	int cpu, rc;
-	int nr_calls = 0;
-	void *hcpu;
-#ifdef CONFIG_SMP
-	struct s390_idle_data *idle;
-#endif
-
 	/* CPU is going idle. */
-	cpu = smp_processor_id();
-	hcpu = (void *)(long)cpu;
 	local_irq_disable();
 	if (need_resched()) {
 		local_irq_enable();
 		return;
 	}
-
-	rc = __atomic_notifier_call_chain(&idle_chain, S390_CPU_IDLE, hcpu, -1,
-					  &nr_calls);
-	if (rc == NOTIFY_BAD) {
-		nr_calls--;
-		__atomic_notifier_call_chain(&idle_chain, S390_CPU_NOT_IDLE,
-					     hcpu, nr_calls, NULL);
+	if (s390_idle_enter() == NOTIFY_BAD) {
 		local_irq_enable();
 		return;
 	}
-
-	/* enable monitor call class 0 */
-	__ctl_set_bit(8, 15);
-
 #ifdef CONFIG_HOTPLUG_CPU
-	if (cpu_is_offline(cpu)) {
+	if (cpu_is_offline(smp_processor_id())) {
 		preempt_enable_no_resched();
 		cpu_die();
 	}
 #endif
-
 	local_mcck_disable();
 	if (test_thread_flag(TIF_MCCK_PENDING)) {
 		local_mcck_enable();
+		s390_idle_leave();
 		local_irq_enable();
 		s390_handle_mcck();
 		return;
 	}
-#ifdef CONFIG_SMP
-	idle = &__get_cpu_var(s390_idle);
-	spin_lock(&idle->lock);
-	idle->idle_count++;
-	idle->in_idle = 1;
-	idle->idle_enter = get_clock();
-	spin_unlock(&idle->lock);
-#endif
 	trace_hardirqs_on();
 	/* Wait for external, I/O or machine check interrupt. */
 	__load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT |
@@ -173,9 +170,10 @@ static void default_idle(void)
 void cpu_idle(void)
 {
 	for (;;) {
+		tick_nohz_stop_sched_tick();
 		while (!need_resched())
 			default_idle();
-
+		tick_nohz_restart_sched_tick();
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -197,6 +195,7 @@ void show_regs(struct pt_regs *regs)
 	/* Show stack backtrace if pt_regs is from kernel mode */
 	if (!(regs->psw.mask & PSW_MASK_PSTATE))
 		show_trace(NULL, (unsigned long *) regs->gprs[15]);
+	show_last_breaking_event(regs);
 }
 
 extern void kernel_thread_starter(void);
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 6e036bae9875..58a064296987 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -41,6 +41,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
+#include "entry.h"
 
 #ifdef CONFIG_COMPAT
 #include "compat_ptrace.h"
diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c
index acf93dba7727..e019b419efc6 100644
--- a/arch/s390/kernel/s390_ext.c
+++ b/arch/s390/kernel/s390_ext.c
@@ -13,11 +13,12 @@
 #include <linux/errno.h>
 #include <linux/kernel_stat.h>
 #include <linux/interrupt.h>
-
+#include <asm/cpu.h>
 #include <asm/lowcore.h>
 #include <asm/s390_ext.h>
 #include <asm/irq_regs.h>
 #include <asm/irq.h>
+#include "entry.h"
 
 /*
  * ext_int_hash[index] is the start of the list for all external interrupts
@@ -119,13 +120,10 @@ void do_extint(struct pt_regs *regs, unsigned short code)
 
 	old_regs = set_irq_regs(regs);
 	irq_enter();
-	asm volatile ("mc 0,0");
-	if (S390_lowcore.int_clock >= S390_lowcore.jiffy_timer)
-		/**
-		 * Make sure that the i/o interrupt did not "overtake"
-		 * the last HZ timer interrupt.
-		 */
-		account_ticks(S390_lowcore.int_clock);
+	s390_idle_check();
+	if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator)
+		/* Serve timer interrupts first. */
+		clock_comparator_work();
 	kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
         index = ext_hash(code);
 	for (p = ext_int_hash[index]; p; p = p->next) {
diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c
index 7234c737f825..48238a114ce9 100644
--- a/arch/s390/kernel/s390_ksyms.c
+++ b/arch/s390/kernel/s390_ksyms.c
@@ -27,13 +27,6 @@ EXPORT_SYMBOL(_zb_findmap);
 EXPORT_SYMBOL(_sb_findmap);
 
 /*
- * semaphore ops
- */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-
-/*
  * binfmt_elf loader 
  */
 extern int dump_fpu (struct pt_regs * regs, s390_fp_regs *fpregs);
diff --git a/arch/s390/kernel/semaphore.c b/arch/s390/kernel/semaphore.c
deleted file mode 100644
index 191303f6c1d8..000000000000
--- a/arch/s390/kernel/semaphore.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *  linux/arch/s390/kernel/semaphore.c
- *
- *  S390 version
- *    Copyright (C) 1998-2000 IBM Corporation
- *    Author(s): Martin Schwidefsky
- *
- *  Derived from "linux/arch/i386/kernel/semaphore.c
- *    Copyright (C) 1999, Linus Torvalds
- *
- */
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Atomically update sem->count. Equivalent to:
- *   old_val = sem->count.counter;
- *   new_val = ((old_val >= 0) ? old_val : 0) + incr;
- *   sem->count.counter = new_val;
- *   return old_val;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
-	int old_val, new_val;
-
-	asm volatile(
-		"	l	%0,0(%3)\n"
-		"0:	ltr	%1,%0\n"
-		"	jhe	1f\n"
-		"	lhi	%1,0\n"
-		"1:	ar	%1,%4\n"
-		"	cs	%0,%1,0(%3)\n"
-		"	jl	0b\n"
-		: "=&d" (old_val), "=&d" (new_val), "=m" (sem->count)
-		: "a" (&sem->count), "d" (incr), "m" (sem->count)
-		: "cc");
-	return old_val;
-}
-
-/*
- * The inline function up() incremented count but the result
- * was <= 0. This indicates that some process is waiting on
- * the semaphore. The semaphore is free and we'll wake the
- * first sleeping process, so we set count to 1 unless some
- * other cpu has called up in the meantime in which case
- * we just increment count by 1.
- */
-void __up(struct semaphore *sem)
-{
-	__sem_update_count(sem, 1);
-	wake_up(&sem->wait);
-}
-
-/*
- * The inline function down() decremented count and the result
- * was < 0. The wait loop will atomically test and update the
- * semaphore counter following the rules:
- *   count > 0: decrement count, wake up queue and exit.
- *   count <= 0: set count to -1, go to sleep.
- */
-void __sched __down(struct semaphore * sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	__set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	add_wait_queue_exclusive(&sem->wait, &wait);
-	while (__sem_update_count(sem, -1) <= 0) {
-		schedule();
-		set_task_state(tsk, TASK_UNINTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	__set_task_state(tsk, TASK_RUNNING);
-	wake_up(&sem->wait);
-}
-
-/*
- * Same as __down() with an additional test for signals.
- * If a signal is pending the count is updated as follows:
- *   count > 0: wake up queue and exit.
- *   count <= 0: set count to 0, wake up queue and exit.
- */
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	__set_task_state(tsk, TASK_INTERRUPTIBLE);
-	add_wait_queue_exclusive(&sem->wait, &wait);
-	while (__sem_update_count(sem, -1) <= 0) {
-		if (signal_pending(current)) {
-			__sem_update_count(sem, 0);
-			retval = -EINTR;
-			break;
-		}
-		schedule();
-		set_task_state(tsk, TASK_INTERRUPTIBLE);
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	__set_task_state(tsk, TASK_RUNNING);
-	wake_up(&sem->wait);
-	return retval;
-}
-
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 290e504061a3..7141147e6b63 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -39,6 +39,7 @@
 #include <linux/pfn.h>
 #include <linux/ctype.h>
 #include <linux/reboot.h>
+#include <linux/topology.h>
 
 #include <asm/ipl.h>
 #include <asm/uaccess.h>
@@ -427,7 +428,7 @@ setup_lowcore(void)
 	lc->io_new_psw.mask = psw_kernel_bits;
 	lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
 	lc->ipl_device = S390_lowcore.ipl_device;
-	lc->jiffy_timer = -1LL;
+	lc->clock_comparator = -1ULL;
 	lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE;
 	lc->async_stack = (unsigned long)
 		__alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE;
@@ -687,7 +688,7 @@ static __init unsigned int stfl(void)
 	return S390_lowcore.stfl_fac_list;
 }
 
-static __init int stfle(unsigned long long *list, int doublewords)
+static int __init __stfle(unsigned long long *list, int doublewords)
 {
 	typedef struct { unsigned long long _[doublewords]; } addrtype;
 	register unsigned long __nr asm("0") = doublewords - 1;
@@ -697,6 +698,13 @@ static __init int stfle(unsigned long long *list, int doublewords)
 	return __nr + 1;
 }
 
+int __init stfle(unsigned long long *list, int doublewords)
+{
+	if (!(stfl() & (1UL << 24)))
+		return -EOPNOTSUPP;
+	return __stfle(list, doublewords);
+}
+
 /*
  * Setup hardware capabilities.
  */
@@ -741,7 +749,7 @@ static void __init setup_hwcaps(void)
 	 *   HWCAP_S390_DFP bit 6.
 	 */
 	if ((elf_hwcap & (1UL << 2)) &&
-	    stfle(&facility_list_extended, 1) > 0) {
+	    __stfle(&facility_list_extended, 1) > 0) {
 		if (facility_list_extended & (1ULL << (64 - 43)))
 			elf_hwcap |= 1UL << 6;
 	}
@@ -823,6 +831,7 @@ setup_arch(char **cmdline_p)
 
         cpu_init();
         __cpu_logical_map[0] = S390_lowcore.cpu_data.cpu_addr;
+	s390_init_cpu_topology();
 
 	/*
 	 * Setup capabilities (ELF_HWCAP & ELF_PLATFORM).
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 4449bf32cbf1..b97682040215 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -27,6 +27,7 @@
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
+#include "entry.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
@@ -235,6 +236,10 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 	/* Default to using normal stack */
 	sp = regs->gprs[15];
 
+	/* Overflow on alternate signal stack gives SIGSEGV. */
+	if (on_sig_stack(sp) && !on_sig_stack((sp - frame_size) & -8UL))
+		return (void __user *) -1UL;
+
 	/* This is the X/Open sanctioned signal stack switching.  */
 	if (ka->sa.sa_flags & SA_ONSTACK) {
 		if (! sas_ss_flags(sp))
@@ -270,6 +275,9 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(sigframe)))
 		goto give_sigsegv;
 
+	if (frame == (void __user *) -1UL)
+		goto give_sigsegv;
+
 	if (__copy_to_user(&frame->sc.oldmask, &set->sig, _SIGMASK_COPY_SIZE))
 		goto give_sigsegv;
 
@@ -327,6 +335,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(rt_sigframe)))
 		goto give_sigsegv;
 
+	if (frame == (void __user *) -1UL)
+		goto give_sigsegv;
+
 	if (copy_siginfo_to_user(&frame->info, info))
 		goto give_sigsegv;
 
@@ -474,11 +485,6 @@ void do_signal(struct pt_regs *regs)
 		int ret;
 #ifdef CONFIG_COMPAT
 		if (test_thread_flag(TIF_31BIT)) {
-			extern int handle_signal32(unsigned long sig,
-						   struct k_sigaction *ka,
-						   siginfo_t *info,
-						   sigset_t *oldset,
-						   struct pt_regs *regs);
 			ret = handle_signal32(signr, &ka, &info, oldset, regs);
 	        }
 		else
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 818bd09c0260..0dfa988c1b26 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -44,6 +44,7 @@
 #include <asm/lowcore.h>
 #include <asm/sclp.h>
 #include <asm/cpu.h>
+#include "entry.h"
 
 /*
  * An array with a pointer the lowcore of every CPU.
@@ -67,13 +68,12 @@ enum s390_cpu_state {
 	CPU_STATE_CONFIGURED,
 };
 
-#ifdef CONFIG_HOTPLUG_CPU
-static DEFINE_MUTEX(smp_cpu_state_mutex);
-#endif
+DEFINE_MUTEX(smp_cpu_state_mutex);
+int smp_cpu_polarization[NR_CPUS];
 static int smp_cpu_state[NR_CPUS];
+static int cpu_management;
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
 
 static void smp_ext_bitcall(int, ec_bit_sig);
 
@@ -298,7 +298,7 @@ static void smp_ext_bitcall(int cpu, ec_bit_sig sig)
 /*
  * this function sends a 'purge tlb' signal to another CPU.
  */
-void smp_ptlb_callback(void *info)
+static void smp_ptlb_callback(void *info)
 {
 	__tlb_flush_local();
 }
@@ -456,6 +456,7 @@ static int smp_rescan_cpus_sigp(cpumask_t avail)
 		if (cpu_known(cpu_id))
 			continue;
 		__cpu_logical_map[logical_cpu] = cpu_id;
+		smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN;
 		if (!cpu_stopped(logical_cpu))
 			continue;
 		cpu_set(logical_cpu, cpu_present_map);
@@ -489,6 +490,7 @@ static int smp_rescan_cpus_sclp(cpumask_t avail)
 		if (cpu_known(cpu_id))
 			continue;
 		__cpu_logical_map[logical_cpu] = cpu_id;
+		smp_cpu_polarization[logical_cpu] = POLARIZATION_UNKNWN;
 		cpu_set(logical_cpu, cpu_present_map);
 		if (cpu >= info->configured)
 			smp_cpu_state[logical_cpu] = CPU_STATE_STANDBY;
@@ -629,14 +631,8 @@ static int __cpuinit smp_alloc_lowcore(int cpu)
 	panic_stack = __get_free_page(GFP_KERNEL);
 	if (!panic_stack || !async_stack)
 		goto out;
-	/*
-	 * Only need to copy the first 512 bytes from address 0. But since
-	 * the compiler emits a warning if src == NULL for memcpy use copy_page
-	 * instead. Copies more than needed but this code is not performance
-	 * critical.
-	 */
-	copy_page(lowcore, &S390_lowcore);
-	memset((void *)lowcore + 512, 0, sizeof(*lowcore) - 512);
+	memcpy(lowcore, &S390_lowcore, 512);
+	memset((char *)lowcore + 512, 0, sizeof(*lowcore) - 512);
 	lowcore->async_stack = async_stack + ASYNC_SIZE;
 	lowcore->panic_stack = panic_stack + PAGE_SIZE;
 
@@ -852,6 +848,7 @@ void __init smp_prepare_boot_cpu(void)
 	S390_lowcore.percpu_offset = __per_cpu_offset[0];
 	current_set[0] = current;
 	smp_cpu_state[0] = CPU_STATE_CONFIGURED;
+	smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
 	spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
 }
 
@@ -903,15 +900,19 @@ static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf,
 	case 0:
 		if (smp_cpu_state[cpu] == CPU_STATE_CONFIGURED) {
 			rc = sclp_cpu_deconfigure(__cpu_logical_map[cpu]);
-			if (!rc)
+			if (!rc) {
 				smp_cpu_state[cpu] = CPU_STATE_STANDBY;
+				smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN;
+			}
 		}
 		break;
 	case 1:
 		if (smp_cpu_state[cpu] == CPU_STATE_STANDBY) {
 			rc = sclp_cpu_configure(__cpu_logical_map[cpu]);
-			if (!rc)
+			if (!rc) {
 				smp_cpu_state[cpu] = CPU_STATE_CONFIGURED;
+				smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN;
+			}
 		}
 		break;
 	default:
@@ -925,6 +926,34 @@ out:
 static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
+static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+{
+	int cpu = dev->id;
+	ssize_t count;
+
+	mutex_lock(&smp_cpu_state_mutex);
+	switch (smp_cpu_polarization[cpu]) {
+	case POLARIZATION_HRZ:
+		count = sprintf(buf, "horizontal\n");
+		break;
+	case POLARIZATION_VL:
+		count = sprintf(buf, "vertical:low\n");
+		break;
+	case POLARIZATION_VM:
+		count = sprintf(buf, "vertical:medium\n");
+		break;
+	case POLARIZATION_VH:
+		count = sprintf(buf, "vertical:high\n");
+		break;
+	default:
+		count = sprintf(buf, "unknown\n");
+		break;
+	}
+	mutex_unlock(&smp_cpu_state_mutex);
+	return count;
+}
+static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
+
 static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
 {
 	return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
@@ -937,6 +966,7 @@ static struct attribute *cpu_common_attrs[] = {
 	&attr_configure.attr,
 #endif
 	&attr_address.attr,
+	&attr_polarization.attr,
 	NULL,
 };
 
@@ -1081,11 +1111,48 @@ static ssize_t __ref rescan_store(struct sys_device *dev,
 out:
 	put_online_cpus();
 	mutex_unlock(&smp_cpu_state_mutex);
+	if (!cpus_empty(newcpus))
+		topology_schedule_update();
 	return rc ? rc : count;
 }
 static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
+static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+{
+	ssize_t count;
+
+	mutex_lock(&smp_cpu_state_mutex);
+	count = sprintf(buf, "%d\n", cpu_management);
+	mutex_unlock(&smp_cpu_state_mutex);
+	return count;
+}
+
+static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
+				 size_t count)
+{
+	int val, rc;
+	char delim;
+
+	if (sscanf(buf, "%d %c", &val, &delim) != 1)
+		return -EINVAL;
+	if (val != 0 && val != 1)
+		return -EINVAL;
+	rc = 0;
+	mutex_lock(&smp_cpu_state_mutex);
+	get_online_cpus();
+	if (cpu_management == val)
+		goto out;
+	rc = topology_set_cpu_management(val);
+	if (!rc)
+		cpu_management = val;
+out:
+	put_online_cpus();
+	mutex_unlock(&smp_cpu_state_mutex);
+	return rc ? rc : count;
+}
+static SYSDEV_ATTR(dispatching, 0644, dispatching_show, dispatching_store);
+
 static int __init topology_init(void)
 {
 	int cpu;
@@ -1099,6 +1166,10 @@ static int __init topology_init(void)
 	if (rc)
 		return rc;
 #endif
+	rc = sysfs_create_file(&cpu_sysdev_class.kset.kobj,
+			       &attr_dispatching.attr);
+	if (rc)
+		return rc;
 	for_each_present_cpu(cpu) {
 		rc = smp_add_present_cpu(cpu);
 		if (rc)
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index fefee99f28aa..988d0d64c2c8 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -29,8 +29,8 @@
 #include <linux/personality.h>
 #include <linux/unistd.h>
 #include <linux/ipc.h>
-
 #include <asm/uaccess.h>
+#include "entry.h"
 
 /*
  * sys_pipe() is the normal C calling standard for creating
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 76a5dd1b4ce9..7aec676fefd5 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -30,7 +30,7 @@
 #include <linux/timex.h>
 #include <linux/notifier.h>
 #include <linux/clocksource.h>
-
+#include <linux/clockchips.h>
 #include <asm/uaccess.h>
 #include <asm/delay.h>
 #include <asm/s390_ext.h>
@@ -39,6 +39,7 @@
 #include <asm/irq_regs.h>
 #include <asm/timer.h>
 #include <asm/etr.h>
+#include <asm/cio.h>
 
 /* change this if you have some constant time drift */
 #define USECS_PER_JIFFY     ((unsigned long) 1000000/HZ)
@@ -57,16 +58,16 @@
 
 static ext_int_info_t ext_int_info_cc;
 static ext_int_info_t ext_int_etr_cc;
-static u64 init_timer_cc;
 static u64 jiffies_timer_cc;
-static u64 xtime_cc;
+
+static DEFINE_PER_CPU(struct clock_event_device, comparators);
 
 /*
  * Scheduler clock - returns current time in nanosec units.
  */
 unsigned long long sched_clock(void)
 {
-	return ((get_clock() - jiffies_timer_cc) * 125) >> 9;
+	return ((get_clock_xt() - jiffies_timer_cc) * 125) >> 9;
 }
 
 /*
@@ -95,164 +96,40 @@ void tod_to_timeval(__u64 todval, struct timespec *xtime)
 #define s390_do_profile()	do { ; } while(0)
 #endif /* CONFIG_PROFILING */
 
-/*
- * Advance the per cpu tick counter up to the time given with the
- * "time" argument. The per cpu update consists of accounting
- * the virtual cpu time, calling update_process_times and calling
- * the profiling hook. If xtime is before time it is advanced as well.
- */
-void account_ticks(u64 time)
+void clock_comparator_work(void)
 {
-	__u32 ticks;
-	__u64 tmp;
-
-	/* Calculate how many ticks have passed. */
-	if (time < S390_lowcore.jiffy_timer)
-		return;
-	tmp = time - S390_lowcore.jiffy_timer;
-	if (tmp >= 2*CLK_TICKS_PER_JIFFY) {  /* more than two ticks ? */
-		ticks = __div(tmp, CLK_TICKS_PER_JIFFY) + 1;
-		S390_lowcore.jiffy_timer +=
-			CLK_TICKS_PER_JIFFY * (__u64) ticks;
-	} else if (tmp >= CLK_TICKS_PER_JIFFY) {
-		ticks = 2;
-		S390_lowcore.jiffy_timer += 2*CLK_TICKS_PER_JIFFY;
-	} else {
-		ticks = 1;
-		S390_lowcore.jiffy_timer += CLK_TICKS_PER_JIFFY;
-	}
-
-#ifdef CONFIG_SMP
-	/*
-	 * Do not rely on the boot cpu to do the calls to do_timer.
-	 * Spread it over all cpus instead.
-	 */
-	write_seqlock(&xtime_lock);
-	if (S390_lowcore.jiffy_timer > xtime_cc) {
-		__u32 xticks;
-		tmp = S390_lowcore.jiffy_timer - xtime_cc;
-		if (tmp >= 2*CLK_TICKS_PER_JIFFY) {
-			xticks = __div(tmp, CLK_TICKS_PER_JIFFY);
-			xtime_cc += (__u64) xticks * CLK_TICKS_PER_JIFFY;
-		} else {
-			xticks = 1;
-			xtime_cc += CLK_TICKS_PER_JIFFY;
-		}
-		do_timer(xticks);
-	}
-	write_sequnlock(&xtime_lock);
-#else
-	do_timer(ticks);
-#endif
-
-	while (ticks--)
-		update_process_times(user_mode(get_irq_regs()));
+	struct clock_event_device *cd;
 
+	S390_lowcore.clock_comparator = -1ULL;
+	set_clock_comparator(S390_lowcore.clock_comparator);
+	cd = &__get_cpu_var(comparators);
+	cd->event_handler(cd);
 	s390_do_profile();
 }
 
-#ifdef CONFIG_NO_IDLE_HZ
-
-#ifdef CONFIG_NO_IDLE_HZ_INIT
-int sysctl_hz_timer = 0;
-#else
-int sysctl_hz_timer = 1;
-#endif
-
 /*
- * Stop the HZ tick on the current CPU.
- * Only cpu_idle may call this function.
+ * Fixup the clock comparator.
  */
-static void stop_hz_timer(void)
+static void fixup_clock_comparator(unsigned long long delta)
 {
-	unsigned long flags;
-	unsigned long seq, next;
-	__u64 timer, todval;
-	int cpu = smp_processor_id();
-
-	if (sysctl_hz_timer != 0)
+	/* If nobody is waiting there's nothing to fix. */
+	if (S390_lowcore.clock_comparator == -1ULL)
 		return;
-
-	cpu_set(cpu, nohz_cpu_mask);
-
-	/*
-	 * Leave the clock comparator set up for the next timer
-	 * tick if either rcu or a softirq is pending.
-	 */
-	if (rcu_needs_cpu(cpu) || local_softirq_pending()) {
-		cpu_clear(cpu, nohz_cpu_mask);
-		return;
-	}
-
-	/*
-	 * This cpu is going really idle. Set up the clock comparator
-	 * for the next event.
-	 */
-	next = next_timer_interrupt();
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		timer = ((__u64) next) - ((__u64) jiffies) + jiffies_64;
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-	todval = -1ULL;
-	/* Be careful about overflows. */
-	if (timer < (-1ULL / CLK_TICKS_PER_JIFFY)) {
-		timer = jiffies_timer_cc + timer * CLK_TICKS_PER_JIFFY;
-		if (timer >= jiffies_timer_cc)
-			todval = timer;
-	}
-	set_clock_comparator(todval);
-}
-
-/*
- * Start the HZ tick on the current CPU.
- * Only cpu_idle may call this function.
- */
-static void start_hz_timer(void)
-{
-	BUG_ON(!in_interrupt());
-
-	if (!cpu_isset(smp_processor_id(), nohz_cpu_mask))
-		return;
-	account_ticks(get_clock());
-	set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
-	cpu_clear(smp_processor_id(), nohz_cpu_mask);
-}
-
-static int nohz_idle_notify(struct notifier_block *self,
-			    unsigned long action, void *hcpu)
-{
-	switch (action) {
-	case S390_CPU_IDLE:
-		stop_hz_timer();
-		break;
-	case S390_CPU_NOT_IDLE:
-		start_hz_timer();
-		break;
-	}
-	return NOTIFY_OK;
+	S390_lowcore.clock_comparator += delta;
+	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-static struct notifier_block nohz_idle_nb = {
-	.notifier_call = nohz_idle_notify,
-};
-
-static void __init nohz_init(void)
+static int s390_next_event(unsigned long delta,
+			   struct clock_event_device *evt)
 {
-	if (register_idle_notifier(&nohz_idle_nb))
-		panic("Couldn't register idle notifier");
+	S390_lowcore.clock_comparator = get_clock() + delta;
+	set_clock_comparator(S390_lowcore.clock_comparator);
+	return 0;
 }
 
-#endif
-
-/*
- * Set up per cpu jiffy timer and set the clock comparator.
- */
-static void setup_jiffy_timer(void)
+static void s390_set_mode(enum clock_event_mode mode,
+			  struct clock_event_device *evt)
 {
-	/* Set up clock comparator to next jiffy. */
-	S390_lowcore.jiffy_timer =
-		jiffies_timer_cc + (jiffies_64 + 1) * CLK_TICKS_PER_JIFFY;
-	set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
 }
 
 /*
@@ -261,7 +138,26 @@ static void setup_jiffy_timer(void)
  */
 void init_cpu_timer(void)
 {
-	setup_jiffy_timer();
+	struct clock_event_device *cd;
+	int cpu;
+
+	S390_lowcore.clock_comparator = -1ULL;
+	set_clock_comparator(S390_lowcore.clock_comparator);
+
+	cpu = smp_processor_id();
+	cd = &per_cpu(comparators, cpu);
+	cd->name		= "comparator";
+	cd->features		= CLOCK_EVT_FEAT_ONESHOT;
+	cd->mult		= 16777;
+	cd->shift		= 12;
+	cd->min_delta_ns	= 1;
+	cd->max_delta_ns	= LONG_MAX;
+	cd->rating		= 400;
+	cd->cpumask		= cpumask_of_cpu(cpu);
+	cd->set_next_event	= s390_next_event;
+	cd->set_mode		= s390_set_mode;
+
+	clockevents_register_device(cd);
 
 	/* Enable clock comparator timer interrupt. */
 	__ctl_set_bit(0,11);
@@ -272,8 +168,6 @@ void init_cpu_timer(void)
 
 static void clock_comparator_interrupt(__u16 code)
 {
-	/* set clock comparator for next tick */
-	set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
 }
 
 static void etr_reset(void);
@@ -318,8 +212,9 @@ static struct clocksource clocksource_tod = {
  */
 void __init time_init(void)
 {
+	u64 init_timer_cc;
+
 	init_timer_cc = reset_tod_clock();
-	xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY;
 	jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
 
 	/* set xtime */
@@ -344,10 +239,6 @@ void __init time_init(void)
 	/* Enable TOD clock interrupts on the boot cpu. */
 	init_cpu_timer();
 
-#ifdef CONFIG_NO_IDLE_HZ
-	nohz_init();
-#endif
-
 #ifdef CONFIG_VIRT_TIMER
 	vtime_init();
 #endif
@@ -701,53 +592,49 @@ static int etr_aib_follows(struct etr_aib *a1, struct etr_aib *a2, int p)
 }
 
 /*
- * The time is "clock". xtime is what we think the time is.
+ * The time is "clock". old is what we think the time is.
  * Adjust the value by a multiple of jiffies and add the delta to ntp.
  * "delay" is an approximation how long the synchronization took. If
  * the time correction is positive, then "delay" is subtracted from
  * the time difference and only the remaining part is passed to ntp.
  */
-static void etr_adjust_time(unsigned long long clock, unsigned long long delay)
+static unsigned long long etr_adjust_time(unsigned long long old,
+					  unsigned long long clock,
+					  unsigned long long delay)
 {
 	unsigned long long delta, ticks;
 	struct timex adjust;
 
-	/*
-	 * We don't have to take the xtime lock because the cpu
-	 * executing etr_adjust_time is running disabled in
-	 * tasklet context and all other cpus are looping in
-	 * etr_sync_cpu_start.
-	 */
-	if (clock > xtime_cc) {
+	if (clock > old) {
 		/* It is later than we thought. */
-		delta = ticks = clock - xtime_cc;
+		delta = ticks = clock - old;
 		delta = ticks = (delta < delay) ? 0 : delta - delay;
 		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
-		init_timer_cc = init_timer_cc + delta;
-		jiffies_timer_cc = jiffies_timer_cc + delta;
-		xtime_cc = xtime_cc + delta;
 		adjust.offset = ticks * (1000000 / HZ);
 	} else {
 		/* It is earlier than we thought. */
-		delta = ticks = xtime_cc - clock;
+		delta = ticks = old - clock;
 		delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
-		init_timer_cc = init_timer_cc - delta;
-		jiffies_timer_cc = jiffies_timer_cc - delta;
-		xtime_cc = xtime_cc - delta;
+		delta = -delta;
 		adjust.offset = -ticks * (1000000 / HZ);
 	}
+	jiffies_timer_cc += delta;
 	if (adjust.offset != 0) {
 		printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
 		       adjust.offset);
 		adjust.modes = ADJ_OFFSET_SINGLESHOT;
 		do_adjtimex(&adjust);
 	}
+	return delta;
 }
 
+static struct {
+	int in_sync;
+	unsigned long long fixup_cc;
+} etr_sync;
+
 static void etr_sync_cpu_start(void *dummy)
 {
-	int *in_sync = dummy;
-
 	etr_enable_sync_clock();
 	/*
 	 * This looks like a busy wait loop but it isn't. etr_sync_cpus
@@ -755,7 +642,7 @@ static void etr_sync_cpu_start(void *dummy)
 	 * __udelay will stop the cpu on an enabled wait psw until the
 	 * TOD is running again.
 	 */
-	while (*in_sync == 0) {
+	while (etr_sync.in_sync == 0) {
 		__udelay(1);
 		/*
 		 * A different cpu changes *in_sync. Therefore use
@@ -763,14 +650,14 @@ static void etr_sync_cpu_start(void *dummy)
 		 */
 		barrier();
 	}
-	if (*in_sync != 1)
+	if (etr_sync.in_sync != 1)
 		/* Didn't work. Clear per-cpu in sync bit again. */
 		etr_disable_sync_clock(NULL);
 	/*
 	 * This round of TOD syncing is done. Set the clock comparator
 	 * to the next tick and let the processor continue.
 	 */
-	setup_jiffy_timer();
+	fixup_clock_comparator(etr_sync.fixup_cc);
 }
 
 static void etr_sync_cpu_end(void *dummy)
@@ -785,8 +672,8 @@ static void etr_sync_cpu_end(void *dummy)
 static int etr_sync_clock(struct etr_aib *aib, int port)
 {
 	struct etr_aib *sync_port;
-	unsigned long long clock, delay;
-	int in_sync, follows;
+	unsigned long long clock, old_clock, delay, delta;
+	int follows;
 	int rc;
 
 	/* Check if the current aib is adjacent to the sync port aib. */
@@ -801,9 +688,9 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 	 * successfully synced the clock. smp_call_function will
 	 * return after all other cpus are in etr_sync_cpu_start.
 	 */
-	in_sync = 0;
+	memset(&etr_sync, 0, sizeof(etr_sync));
 	preempt_disable();
-	smp_call_function(etr_sync_cpu_start,&in_sync,0,0);
+	smp_call_function(etr_sync_cpu_start, NULL, 0, 0);
 	local_irq_disable();
 	etr_enable_sync_clock();
 
@@ -811,6 +698,7 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 	__ctl_set_bit(14, 21);
 	__ctl_set_bit(0, 29);
 	clock = ((unsigned long long) (aib->edf2.etv + 1)) << 32;
+	old_clock = get_clock();
 	if (set_clock(clock) == 0) {
 		__udelay(1);	/* Wait for the clock to start. */
 		__ctl_clear_bit(0, 29);
@@ -819,16 +707,17 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 		/* Adjust Linux timing variables. */
 		delay = (unsigned long long)
 			(aib->edf2.etv - sync_port->edf2.etv) << 32;
-		etr_adjust_time(clock, delay);
-		setup_jiffy_timer();
+		delta = etr_adjust_time(old_clock, clock, delay);
+		etr_sync.fixup_cc = delta;
+		fixup_clock_comparator(delta);
 		/* Verify that the clock is properly set. */
 		if (!etr_aib_follows(sync_port, aib, port)) {
 			/* Didn't work. */
 			etr_disable_sync_clock(NULL);
-			in_sync = -EAGAIN;
+			etr_sync.in_sync = -EAGAIN;
 			rc = -EAGAIN;
 		} else {
-			in_sync = 1;
+			etr_sync.in_sync = 1;
 			rc = 0;
 		}
 	} else {
@@ -836,7 +725,7 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 		__ctl_clear_bit(0, 29);
 		__ctl_clear_bit(14, 21);
 		etr_disable_sync_clock(NULL);
-		in_sync = -EAGAIN;
+		etr_sync.in_sync = -EAGAIN;
 		rc = -EAGAIN;
 	}
 	local_irq_enable();
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
new file mode 100644
index 000000000000..12b39b3d9c38
--- /dev/null
+++ b/arch/s390/kernel/topology.c
@@ -0,0 +1,314 @@
+/*
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/bootmem.h>
+#include <linux/sched.h>
+#include <linux/workqueue.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <asm/delay.h>
+#include <asm/s390_ext.h>
+#include <asm/sysinfo.h>
+
+#define CPU_BITS 64
+#define NR_MAG 6
+
+#define PTF_HORIZONTAL	(0UL)
+#define PTF_VERTICAL	(1UL)
+#define PTF_CHECK	(2UL)
+
+struct tl_cpu {
+	unsigned char reserved0[4];
+	unsigned char :6;
+	unsigned char pp:2;
+	unsigned char reserved1;
+	unsigned short origin;
+	unsigned long mask[CPU_BITS / BITS_PER_LONG];
+};
+
+struct tl_container {
+	unsigned char reserved[8];
+};
+
+union tl_entry {
+	unsigned char nl;
+	struct tl_cpu cpu;
+	struct tl_container container;
+};
+
+struct tl_info {
+	unsigned char reserved0[2];
+	unsigned short length;
+	unsigned char mag[NR_MAG];
+	unsigned char reserved1;
+	unsigned char mnest;
+	unsigned char reserved2[4];
+	union tl_entry tle[0];
+};
+
+struct core_info {
+	struct core_info *next;
+	cpumask_t mask;
+};
+
+static void topology_work_fn(struct work_struct *work);
+static struct tl_info *tl_info;
+static struct core_info core_info;
+static int machine_has_topology;
+static int machine_has_topology_irq;
+static struct timer_list topology_timer;
+static void set_topology_timer(void);
+static DECLARE_WORK(topology_work, topology_work_fn);
+
+cpumask_t cpu_coregroup_map(unsigned int cpu)
+{
+	struct core_info *core = &core_info;
+	cpumask_t mask;
+
+	cpus_clear(mask);
+	if (!machine_has_topology)
+		return cpu_present_map;
+	mutex_lock(&smp_cpu_state_mutex);
+	while (core) {
+		if (cpu_isset(cpu, core->mask)) {
+			mask = core->mask;
+			break;
+		}
+		core = core->next;
+	}
+	mutex_unlock(&smp_cpu_state_mutex);
+	if (cpus_empty(mask))
+		mask = cpumask_of_cpu(cpu);
+	return mask;
+}
+
+static void add_cpus_to_core(struct tl_cpu *tl_cpu, struct core_info *core)
+{
+	unsigned int cpu;
+
+	for (cpu = find_first_bit(&tl_cpu->mask[0], CPU_BITS);
+	     cpu < CPU_BITS;
+	     cpu = find_next_bit(&tl_cpu->mask[0], CPU_BITS, cpu + 1))
+	{
+		unsigned int rcpu, lcpu;
+
+		rcpu = CPU_BITS - 1 - cpu + tl_cpu->origin;
+		for_each_present_cpu(lcpu) {
+			if (__cpu_logical_map[lcpu] == rcpu) {
+				cpu_set(lcpu, core->mask);
+				smp_cpu_polarization[lcpu] = tl_cpu->pp;
+			}
+		}
+	}
+}
+
+static void clear_cores(void)
+{
+	struct core_info *core = &core_info;
+
+	while (core) {
+		cpus_clear(core->mask);
+		core = core->next;
+	}
+}
+
+static union tl_entry *next_tle(union tl_entry *tle)
+{
+	if (tle->nl)
+		return (union tl_entry *)((struct tl_container *)tle + 1);
+	else
+		return (union tl_entry *)((struct tl_cpu *)tle + 1);
+}
+
+static void tl_to_cores(struct tl_info *info)
+{
+	union tl_entry *tle, *end;
+	struct core_info *core = &core_info;
+
+	mutex_lock(&smp_cpu_state_mutex);
+	clear_cores();
+	tle = info->tle;
+	end = (union tl_entry *)((unsigned long)info + info->length);
+	while (tle < end) {
+		switch (tle->nl) {
+		case 5:
+		case 4:
+		case 3:
+		case 2:
+			break;
+		case 1:
+			core = core->next;
+			break;
+		case 0:
+			add_cpus_to_core(&tle->cpu, core);
+			break;
+		default:
+			clear_cores();
+			machine_has_topology = 0;
+			return;
+		}
+		tle = next_tle(tle);
+	}
+	mutex_unlock(&smp_cpu_state_mutex);
+}
+
+static void topology_update_polarization_simple(void)
+{
+	int cpu;
+
+	mutex_lock(&smp_cpu_state_mutex);
+	for_each_present_cpu(cpu)
+		smp_cpu_polarization[cpu] = POLARIZATION_HRZ;
+	mutex_unlock(&smp_cpu_state_mutex);
+}
+
+static int ptf(unsigned long fc)
+{
+	int rc;
+
+	asm volatile(
+		"	.insn	rre,0xb9a20000,%1,%1\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (rc)
+		: "d" (fc)  : "cc");
+	return rc;
+}
+
+int topology_set_cpu_management(int fc)
+{
+	int cpu;
+	int rc;
+
+	if (!machine_has_topology)
+		return -EOPNOTSUPP;
+	if (fc)
+		rc = ptf(PTF_VERTICAL);
+	else
+		rc = ptf(PTF_HORIZONTAL);
+	if (rc)
+		return -EBUSY;
+	for_each_present_cpu(cpu)
+		smp_cpu_polarization[cpu] = POLARIZATION_UNKNWN;
+	return rc;
+}
+
+void arch_update_cpu_topology(void)
+{
+	struct tl_info *info = tl_info;
+	struct sys_device *sysdev;
+	int cpu;
+
+	if (!machine_has_topology) {
+		topology_update_polarization_simple();
+		return;
+	}
+	stsi(info, 15, 1, 2);
+	tl_to_cores(info);
+	for_each_online_cpu(cpu) {
+		sysdev = get_cpu_sysdev(cpu);
+		kobject_uevent(&sysdev->kobj, KOBJ_CHANGE);
+	}
+}
+
+static void topology_work_fn(struct work_struct *work)
+{
+	arch_reinit_sched_domains();
+}
+
+void topology_schedule_update(void)
+{
+	schedule_work(&topology_work);
+}
+
+static void topology_timer_fn(unsigned long ignored)
+{
+	if (ptf(PTF_CHECK))
+		topology_schedule_update();
+	set_topology_timer();
+}
+
+static void set_topology_timer(void)
+{
+	topology_timer.function = topology_timer_fn;
+	topology_timer.data = 0;
+	topology_timer.expires = jiffies + 60 * HZ;
+	add_timer(&topology_timer);
+}
+
+static void topology_interrupt(__u16 code)
+{
+	schedule_work(&topology_work);
+}
+
+static int __init init_topology_update(void)
+{
+	int rc;
+
+	if (!machine_has_topology) {
+		topology_update_polarization_simple();
+		return 0;
+	}
+	init_timer_deferrable(&topology_timer);
+	if (machine_has_topology_irq) {
+		rc = register_external_interrupt(0x2005, topology_interrupt);
+		if (rc)
+			return rc;
+		ctl_set_bit(0, 8);
+	}
+	else
+		set_topology_timer();
+	return 0;
+}
+__initcall(init_topology_update);
+
+void __init s390_init_cpu_topology(void)
+{
+	unsigned long long facility_bits;
+	struct tl_info *info;
+	struct core_info *core;
+	int nr_cores;
+	int i;
+
+	if (stfle(&facility_bits, 1) <= 0)
+		return;
+	if (!(facility_bits & (1ULL << 52)) || !(facility_bits & (1ULL << 61)))
+		return;
+	machine_has_topology = 1;
+
+	if (facility_bits & (1ULL << 51))
+		machine_has_topology_irq = 1;
+
+	tl_info = alloc_bootmem_pages(PAGE_SIZE);
+	if (!tl_info)
+		goto error;
+	info = tl_info;
+	stsi(info, 15, 1, 2);
+
+	nr_cores = info->mag[NR_MAG - 2];
+	for (i = 0; i < info->mnest - 2; i++)
+		nr_cores *= info->mag[NR_MAG - 3 - i];
+
+	printk(KERN_INFO "CPU topology:");
+	for (i = 0; i < NR_MAG; i++)
+		printk(" %d", info->mag[i]);
+	printk(" / %d\n", info->mnest);
+
+	core = &core_info;
+	for (i = 0; i < nr_cores; i++) {
+		core->next = alloc_bootmem(sizeof(struct core_info));
+		core = core->next;
+		if (!core)
+			goto error;
+	}
+	return;
+error:
+	machine_has_topology = 0;
+	machine_has_topology_irq = 0;
+}
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 60f728aeaf12..57b607b61100 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -42,11 +42,8 @@
 #include <asm/s390_ext.h>
 #include <asm/lowcore.h>
 #include <asm/debug.h>
+#include "entry.h"
 
-/* Called from entry.S only */
-extern void handle_per_exception(struct pt_regs *regs);
-
-typedef void pgm_check_handler_t(struct pt_regs *, long);
 pgm_check_handler_t *pgm_check_table[128];
 
 #ifdef CONFIG_SYSCTL
@@ -59,7 +56,6 @@ int sysctl_userprocess_debug = 0;
 
 extern pgm_check_handler_t do_protection_exception;
 extern pgm_check_handler_t do_dat_exception;
-extern pgm_check_handler_t do_monitor_call;
 extern pgm_check_handler_t do_asce_exception;
 
 #define stack_pointer ({ void **sp; asm("la %0,0(15)" : "=&d" (sp)); sp; })
@@ -138,7 +134,6 @@ void show_trace(struct task_struct *task, unsigned long *stack)
 	else
 		__show_trace(sp, S390_lowcore.thread_info,
 			     S390_lowcore.thread_info + THREAD_SIZE);
-	printk("\n");
 	if (!task)
 		task = current;
 	debug_show_held_locks(task);
@@ -166,6 +161,15 @@ void show_stack(struct task_struct *task, unsigned long *sp)
 	show_trace(task, sp);
 }
 
+#ifdef CONFIG_64BIT
+void show_last_breaking_event(struct pt_regs *regs)
+{
+	printk("Last Breaking-Event-Address:\n");
+	printk(" [<%016lx>] ", regs->args[0] & PSW_ADDR_INSN);
+	print_symbol("%s\n", regs->args[0] & PSW_ADDR_INSN);
+}
+#endif
+
 /*
  * The architecture-independent dump_stack generator
  */
@@ -739,6 +743,5 @@ void __init trap_init(void)
         pgm_check_table[0x15] = &operand_exception;
         pgm_check_table[0x1C] = &space_switch_exception;
         pgm_check_table[0x1D] = &hfp_sqrt_exception;
-	pgm_check_table[0x40] = &do_monitor_call;
 	pfault_irq_init();
 }
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index 70f2a862b670..eae21a8ac72d 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -34,7 +34,7 @@ void __delay(unsigned long loops)
  */
 void __udelay(unsigned long usecs)
 {
-	u64 end, time, jiffy_timer = 0;
+	u64 end, time, old_cc = 0;
 	unsigned long flags, cr0, mask, dummy;
 	int irq_context;
 
@@ -43,8 +43,8 @@ void __udelay(unsigned long usecs)
 		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
-		jiffy_timer = S390_lowcore.jiffy_timer;
-		S390_lowcore.jiffy_timer = -1ULL - (4096 << 12);
+		old_cc = S390_lowcore.clock_comparator;
+		S390_lowcore.clock_comparator = -1ULL;
 		__ctl_store(cr0, 0, 0);
 		dummy = (cr0 & 0xffff00e0) | 0x00000800;
 		__ctl_load(dummy , 0, 0);
@@ -55,8 +55,8 @@ void __udelay(unsigned long usecs)
 
 	end = get_clock() + ((u64) usecs << 12);
 	do {
-		time = end < S390_lowcore.jiffy_timer ?
-			end : S390_lowcore.jiffy_timer;
+		time = end < S390_lowcore.clock_comparator ?
+			end : S390_lowcore.clock_comparator;
 		set_clock_comparator(time);
 		trace_hardirqs_on();
 		__load_psw_mask(mask);
@@ -65,10 +65,10 @@ void __udelay(unsigned long usecs)
 
 	if (raw_irqs_disabled_flags(flags)) {
 		__ctl_load(cr0, 0, 0);
-		S390_lowcore.jiffy_timer = jiffy_timer;
+		S390_lowcore.clock_comparator = old_cc;
 	}
 	if (!irq_context)
 		_local_bh_enable();
-	set_clock_comparator(S390_lowcore.jiffy_timer);
+	set_clock_comparator(S390_lowcore.clock_comparator);
 	local_irq_restore(flags);
 }
diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c
index 7e8efaade2ea..d66215b0fde9 100644
--- a/arch/s390/lib/uaccess_pt.c
+++ b/arch/s390/lib/uaccess_pt.c
@@ -302,6 +302,10 @@ static size_t copy_in_user_pt(size_t n, void __user *to,
 	pte_t *pte_from, *pte_to;
 	int write_user;
 
+	if (segment_eq(get_fs(), KERNEL_DS)) {
+		memcpy((void __force *) to, (void __force *) from, n);
+		return 0;
+	}
 	done = 0;
 retry:
 	spin_lock(&mm->page_table_lock);
@@ -361,18 +365,10 @@ fault:
 		     : "0" (-EFAULT), "d" (oparg), "a" (uaddr),		\
 		       "m" (*uaddr) : "cc" );
 
-int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
+static int __futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
 {
 	int oldval = 0, newval, ret;
 
-	spin_lock(&current->mm->page_table_lock);
-	uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
-	if (!uaddr) {
-		spin_unlock(&current->mm->page_table_lock);
-		return -EFAULT;
-	}
-	get_page(virt_to_page(uaddr));
-	spin_unlock(&current->mm->page_table_lock);
 	switch (op) {
 	case FUTEX_OP_SET:
 		__futex_atomic_op("lr %2,%5\n",
@@ -397,15 +393,17 @@ int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
 	default:
 		ret = -ENOSYS;
 	}
-	put_page(virt_to_page(uaddr));
-	*old = oldval;
+	if (ret == 0)
+		*old = oldval;
 	return ret;
 }
 
-int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
 {
 	int ret;
 
+	if (segment_eq(get_fs(), KERNEL_DS))
+		return __futex_atomic_op_pt(op, uaddr, oparg, old);
 	spin_lock(&current->mm->page_table_lock);
 	uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
 	if (!uaddr) {
@@ -414,13 +412,40 @@ int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
 	}
 	get_page(virt_to_page(uaddr));
 	spin_unlock(&current->mm->page_table_lock);
-	asm volatile("   cs   %1,%4,0(%5)\n"
-		     "0: lr   %0,%1\n"
-		     "1:\n"
-		     EX_TABLE(0b,1b)
+	ret = __futex_atomic_op_pt(op, uaddr, oparg, old);
+	put_page(virt_to_page(uaddr));
+	return ret;
+}
+
+static int __futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+{
+	int ret;
+
+	asm volatile("0: cs   %1,%4,0(%5)\n"
+		     "1: lr   %0,%1\n"
+		     "2:\n"
+		     EX_TABLE(0b,2b) EX_TABLE(1b,2b)
 		     : "=d" (ret), "+d" (oldval), "=m" (*uaddr)
 		     : "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
 		     : "cc", "memory" );
+	return ret;
+}
+
+int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+{
+	int ret;
+
+	if (segment_eq(get_fs(), KERNEL_DS))
+		return __futex_atomic_cmpxchg_pt(uaddr, oldval, newval);
+	spin_lock(&current->mm->page_table_lock);
+	uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
+	if (!uaddr) {
+		spin_unlock(&current->mm->page_table_lock);
+		return -EFAULT;
+	}
+	get_page(virt_to_page(uaddr));
+	spin_unlock(&current->mm->page_table_lock);
+	ret = __futex_atomic_cmpxchg_pt(uaddr, oldval, newval);
 	put_page(virt_to_page(uaddr));
 	return ret;
 }
diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c
index 880b0ebf894b..ed2af0a3303b 100644
--- a/arch/s390/mm/extmem.c
+++ b/arch/s390/mm/extmem.c
@@ -289,22 +289,8 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long
 
 	rc = add_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
 
-	switch (rc) {
-	case 0:
-		break;
-	case -ENOSPC:
-		PRINT_WARN("segment_load: not loading segment %s - overlaps "
-			   "storage/segment\n", name);
-		goto out_free;
-	case -ERANGE:
-		PRINT_WARN("segment_load: not loading segment %s - exceeds "
-			   "kernel mapping range\n", name);
-		goto out_free;
-	default:
-		PRINT_WARN("segment_load: not loading segment %s (rc: %d)\n",
-			   name, rc);
+	if (rc)
 		goto out_free;
-	}
 
 	seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL);
 	if (seg->res == NULL) {
@@ -582,8 +568,59 @@ out:
 	mutex_unlock(&dcss_lock);
 }
 
+/*
+ * print appropriate error message for segment_load()/segment_type()
+ * return code
+ */
+void segment_warning(int rc, char *seg_name)
+{
+	switch (rc) {
+	case -ENOENT:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "does not exist\n", seg_name);
+		break;
+	case -ENOSYS:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "not running on VM\n", seg_name);
+		break;
+	case -EIO:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "hardware error\n", seg_name);
+		break;
+	case -ENOTSUPP:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "is a multi-part segment\n", seg_name);
+		break;
+	case -ENOSPC:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "overlaps with storage\n", seg_name);
+		break;
+	case -EBUSY:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "overlaps with already loaded dcss\n", seg_name);
+		break;
+	case -EPERM:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "already loaded in incompatible mode\n", seg_name);
+		break;
+	case -ENOMEM:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "out of memory\n", seg_name);
+		break;
+	case -ERANGE:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "exceeds kernel mapping range\n", seg_name);
+		break;
+	default:
+		PRINT_WARN("cannot load/query segment %s, "
+			   "return value %i\n", seg_name, rc);
+		break;
+	}
+}
+
 EXPORT_SYMBOL(segment_load);
 EXPORT_SYMBOL(segment_unload);
 EXPORT_SYMBOL(segment_save);
 EXPORT_SYMBOL(segment_type);
 EXPORT_SYMBOL(segment_modify_shared);
+EXPORT_SYMBOL(segment_warning);
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index ed13d429a487..2650f46001d0 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -28,11 +28,11 @@
 #include <linux/hardirq.h>
 #include <linux/kprobes.h>
 #include <linux/uaccess.h>
-
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/s390_ext.h>
 #include <asm/mmu_context.h>
+#include "../kernel/entry.h"
 
 #ifndef CONFIG_64BIT
 #define __FAIL_ADDR_MASK 0x7ffff000
@@ -50,8 +50,6 @@
 extern int sysctl_userprocess_debug;
 #endif
 
-extern void die(const char *,struct pt_regs *,long);
-
 #ifdef CONFIG_KPROBES
 static inline int notify_page_fault(struct pt_regs *regs, long err)
 {
@@ -245,11 +243,6 @@ static void do_sigbus(struct pt_regs *regs, unsigned long error_code,
 }
 
 #ifdef CONFIG_S390_EXEC_PROTECT
-extern long sys_sigreturn(struct pt_regs *regs);
-extern long sys_rt_sigreturn(struct pt_regs *regs);
-extern long sys32_sigreturn(struct pt_regs *regs);
-extern long sys32_rt_sigreturn(struct pt_regs *regs);
-
 static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
 			 unsigned long address, unsigned long error_code)
 {
@@ -270,15 +263,15 @@ static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
 #ifdef CONFIG_COMPAT
 	compat = test_tsk_thread_flag(current, TIF_31BIT);
 	if (compat && instruction == 0x0a77)
-		sys32_sigreturn(regs);
+		sys32_sigreturn();
 	else if (compat && instruction == 0x0aad)
-		sys32_rt_sigreturn(regs);
+		sys32_rt_sigreturn();
 	else
 #endif
 	if (instruction == 0x0a77)
-		sys_sigreturn(regs);
+		sys_sigreturn();
 	else if (instruction == 0x0aad)
-		sys_rt_sigreturn(regs);
+		sys_rt_sigreturn();
 	else {
 		current->thread.prot_addr = address;
 		current->thread.trap_no = error_code;
@@ -424,7 +417,7 @@ no_context:
 }
 
 void __kprobes do_protection_exception(struct pt_regs *regs,
-				       unsigned long error_code)
+				       long error_code)
 {
 	/* Protection exception is supressing, decrement psw address. */
 	regs->psw.addr -= (error_code >> 16);
@@ -440,7 +433,7 @@ void __kprobes do_protection_exception(struct pt_regs *regs,
 	do_exception(regs, 4, 1);
 }
 
-void __kprobes do_dat_exception(struct pt_regs *regs, unsigned long error_code)
+void __kprobes do_dat_exception(struct pt_regs *regs, long error_code)
 {
 	do_exception(regs, error_code & 0xff, 0);
 }
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 8053245fe259..202c952a29b4 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -50,7 +50,6 @@ void show_mem(void)
 
 	printk("Mem-info:\n");
 	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
 	i = max_mapnr;
 	while (i-- > 0) {
 		if (!pfn_valid(i))
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 783cfbbf87ca..6a679c3e15e8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -72,9 +72,6 @@ config SYS_SUPPORTS_NUMA
 config SYS_SUPPORTS_PCI
 	bool
 
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
@@ -170,6 +167,12 @@ config CPU_SUBTYPE_SH7263
 	select CPU_SH2A
 	select CPU_HAS_FPU
 
+config CPU_SUBTYPE_MXG
+	bool "Support MX-G processor"
+	select CPU_SH2A
+	help
+	  Select MX-G if running on an R8A03022BG part.
+
 # SH-3 Processor Support
 
 config CPU_SUBTYPE_SH7705
@@ -273,6 +276,15 @@ config CPU_SUBTYPE_SH4_202
 
 # SH-4A Processor Support
 
+config CPU_SUBTYPE_SH7723
+	bool "Support SH7723 processor"
+	select CPU_SH4A
+	select CPU_SHX2
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_NUMA
+	help
+	  Select SH7723 if you have an SH-MobileR2 CPU.
+
 config CPU_SUBTYPE_SH7763
 	bool "Support SH7763 processor"
 	select CPU_SH4A
@@ -369,6 +381,14 @@ config SH_7619_SOLUTION_ENGINE
 	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
 	  evaluation board.
 	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
 config SH_7722_SOLUTION_ENGINE
 	bool "SolutionEngine7722"
 	select SOLUTION_ENGINE
@@ -456,13 +476,6 @@ config SH_SECUREEDGE5410
 	  This includes both the OEM SecureEdge products as well as the
 	  SME product line.
 
-config SH_7710VOIPGW
-	bool "SH7710-VOIP-GW"
-	depends on CPU_SUBTYPE_SH7710
-	help
-	  Select this option to build a kernel for the SH7710 based
-	  VOIP GW.
-
 config SH_RTS7751R2D
 	bool "RTS7751R2D"
 	depends on CPU_SUBTYPE_SH7751R
@@ -570,7 +583,7 @@ config SH_TMU
 config SH_CMT
 	def_bool y
 	prompt "CMT timer support"
-	depends on CPU_SH2
+	depends on CPU_SH2 && !CPU_SUBTYPE_MXG
 	help
 	  This enables the use of the CMT as the system timer.
 
@@ -587,6 +600,8 @@ config SH_TIMER_IRQ
 			CPU_SUBTYPE_SH7763
 	default "86" if CPU_SUBTYPE_SH7619
 	default "140" if CPU_SUBTYPE_SH7206
+	default "142" if CPU_SUBTYPE_SH7203
+	default "238" if CPU_SUBTYPE_MXG
 	default "16"
 
 config SH_PCLK_FREQ
@@ -594,10 +609,10 @@ config SH_PCLK_FREQ
 	default "27000000" if CPU_SUBTYPE_SH7343
 	default "31250000" if CPU_SUBTYPE_SH7619
 	default "32000000" if CPU_SUBTYPE_SH7722
-	default "33333333" if CPU_SUBTYPE_SH7770 || \
+	default "33333333" if CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7723 || \
 			      CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
 			      CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \
-			      CPU_SUBTYPE_SH7263
+			      CPU_SUBTYPE_SH7263 || CPU_SUBTYPE_MXG
 	default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
 	default "66000000" if CPU_SUBTYPE_SH4_202
 	default "50000000"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 5dcb74b947a9..d9d28f9dd0db 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -29,16 +29,17 @@ config EARLY_SCIF_CONSOLE
 config EARLY_SCIF_CONSOLE_PORT
 	hex
 	depends on EARLY_SCIF_CONSOLE
-	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763
-	default "0xffe00000" if CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
-	default "0xffea0000" if CPU_SUBTYPE_SH7785
-	default "0xfffe8000" if CPU_SUBTYPE_SH7203
-	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
-	default "0xf8420000" if CPU_SUBTYPE_SH7619
 	default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705
 	default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721
+	default "0xf8420000" if CPU_SUBTYPE_SH7619
+	default "0xff804000" if CPU_SUBTYPE_MXG
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
+	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
 	default "0xffe80000" if CPU_SH4
+	default "0xffea0000" if CPU_SUBTYPE_SH7785
+	default "0xfffe8000" if CPU_SUBTYPE_SH7203
+	default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263
 	default "0x00000000"
 
 config EARLY_PRINTK
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 81381e5773c8..bb06f83e6239 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -107,6 +107,7 @@ machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
 machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
 machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
+machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
 machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
 machdir-$(CONFIG_SH_MPC1211)			+= mpc1211
@@ -118,7 +119,6 @@ machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
 machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
 machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
-machdir-$(CONFIG_SH_7710VOIPGW)			+= renesas/sh7710voipgw
 machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
 machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
 machdir-$(CONFIG_SH_LANDISK)			+= landisk
@@ -155,7 +155,11 @@ drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
+ifneq ($(KBUILD_SRC),)
 incdir-prefix	:= $(srctree)/include/asm-sh/
+else
+incdir-prefix	:=
+endif
 
 #	Update machine arch and proc symlinks if something which affects
 #	them changed.  We use .arch and .mach to indicate when they were
@@ -183,7 +187,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
 	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
 	$(Q)rm -f include/asm-sh/mach
 	$(Q)for i in $(incdir-y); do \
-	if [ -d $(incdir-prefix)$$i ]; then \
+	if [ -d $(srctree)/include/asm-sh/$$i ]; then \
 		echo -n '  SYMLINK include/asm-sh/mach -> '; \
 		echo -e "include/asm-sh/$$i"; \
 		ln -fsn $(incdir-prefix)$$i \
@@ -192,7 +196,7 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
 		if [ ! -d include/asm-sh/mach ]; then \
 			echo -n '  SYMLINK include/asm-sh/mach -> '; \
 			echo -e 'include/asm-sh'; \
-			ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+			ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
 		fi; \
 	fi; \
 	done
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c
index 640ca2a74f16..177f4f028e0d 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/hp6xx/hp6xx_apm.c
@@ -2,6 +2,7 @@
  * bios-less APM driver for hp680
  *
  * Copyright 2005 (c) Andriy Skulysh <askulysh@gmail.com>
+ * Copyright 2008 (c) Kristoffer Ericson <kristoffer.ericson@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License.
@@ -15,17 +16,19 @@
 #include <asm/adc.h>
 #include <asm/hp6xx.h>
 
-#define SH7709_PGDR			0xa400012c
-
+/* percentage values */
 #define APM_CRITICAL			10
 #define APM_LOW				30
 
+/* resonably sane values */
 #define HP680_BATTERY_MAX		898
 #define HP680_BATTERY_MIN		486
 #define HP680_BATTERY_AC_ON		1023
 
 #define MODNAME "hp6x0_apm"
 
+#define PGDR	0xa400012c
+
 static void hp6x0_apm_get_power_status(struct apm_power_info *info)
 {
 	int battery, backup, charging, percentage;
@@ -38,17 +41,26 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info)
 	percentage = 100 * (battery - HP680_BATTERY_MIN) /
 			   (HP680_BATTERY_MAX - HP680_BATTERY_MIN);
 
+	/* % of full battery */
+	info->battery_life = percentage;
+
+	/* We want our estimates in minutes */
+	info->units = 0;
+
+	/* Extremely(!!) rough estimate, we will replace this with a datalist later on */
+	info->time = (2 * battery);
+
 	info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ?
 			 APM_AC_ONLINE : APM_AC_OFFLINE;
 
-	pgdr = ctrl_inb(SH7709_PGDR);
+	pgdr = ctrl_inb(PGDR);
 	if (pgdr & PGDR_MAIN_BATTERY_OUT) {
 		info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
 		info->battery_flag	= 0x80;
 	} else if (charging < 8) {
 		info->battery_status	= APM_BATTERY_STATUS_CHARGING;
 		info->battery_flag	= 0x08;
-		info->ac_line_status = 0xff;
+		info->ac_line_status	= 0x01;
 	} else if (percentage <= APM_CRITICAL) {
 		info->battery_status	= APM_BATTERY_STATUS_CRITICAL;
 		info->battery_flag	= 0x04;
@@ -59,8 +71,6 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info)
 		info->battery_status	= APM_BATTERY_STATUS_HIGH;
 		info->battery_flag	= 0x01;
 	}
-
-	info->units = 0;
 }
 
 static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev)
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
index 21ab8c8fb590..00d52a20d8a5 100644
--- a/arch/sh/boards/renesas/migor/setup.c
+++ b/arch/sh/boards/renesas/migor/setup.c
@@ -10,8 +10,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <asm/migor.h>
 
 /* Address     IRQ  Size  Bus  Description
  * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
@@ -23,9 +29,9 @@
 
 static struct resource smc91x_eth_resources[] = {
 	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = P2SEGADDR(0x10000300),
-		.end    = P2SEGADDR(0x1000030f),
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
@@ -40,19 +46,202 @@ static struct platform_device smc91x_eth_device = {
 	.resource       = smc91x_eth_resources,
 };
 
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+}
+
+struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
 static struct platform_device *migor_devices[] __initdata = {
 	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+};
+
+static struct i2c_board_info __initdata migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+		.type   = "rs5c372b",
+	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = 38, /* IRQ6 */
+	},
 };
 
 static int __init migor_devices_setup(void)
 {
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+ 
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
 __initcall(migor_devices_setup);
 
 static void __init migor_setup(char **cmdline_p)
 {
-	ctrl_outw(0x1000, 0xa4050110); /* Enable IRQ0 in PJCR */
+	/* SMC91C111 - Enable IRQ0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
+
+	/* KEYSC */
+	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
+
+	/* NAND Flash */
+	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
+	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
+		  BSC_CS6ABCR);
+
+	/* I2C */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
+
+	/* Touch Panel - Enable IRQ6 */
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
+	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
+	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
 }
 
 static struct sh_machine_vector mv_migor __initmv = {
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
index 1f8f073f27be..68f0ad1b637d 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
@@ -18,31 +18,44 @@ enum {
 	UNUSED = 0,
 
 	/* board specific interrupt sources */
-	AX88796,          /* Ethernet controller */
-	CF,               /* Compact Flash */
-	PSW,              /* Push Switch */
-	EXT1,             /* EXT1n IRQ */
-	EXT4,             /* EXT4n IRQ */
+	CF,		/* Compact Flash */
+	TP,		/* Touch panel */
+	SCIF1,		/* FPGA SCIF1 */
+	SCIF0,		/* FPGA SCIF0 */
+	SMBUS,		/* SMBUS */
+	RTC,		/* RTC Alarm */
+	AX88796,	/* Ethernet controller */
+	PSW,		/* Push Switch */
+
+	/* external bus connector */
+	EXT1, EXT2, EXT4, EXT5, EXT6,
 };
 
 static struct intc_vect vectors[] __initdata = {
 	INTC_IRQ(CF, IRQ_CF),
-	INTC_IRQ(PSW, IRQ_PSW),
+	INTC_IRQ(TP, IRQ_TP),
+	INTC_IRQ(SCIF1, IRQ_SCIF1),
+	INTC_IRQ(SCIF0, IRQ_SCIF0),
+	INTC_IRQ(SMBUS, IRQ_SMBUS),
+	INTC_IRQ(RTC, IRQ_RTC),
 	INTC_IRQ(AX88796, IRQ_AX88796),
-	INTC_IRQ(EXT1, IRQ_EXT1),
-	INTC_IRQ(EXT4, IRQ_EXT4),
+	INTC_IRQ(PSW, IRQ_PSW),
+
+	INTC_IRQ(EXT1, IRQ_EXT1), INTC_IRQ(EXT2, IRQ_EXT2),
+	INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5),
+	INTC_IRQ(EXT6, IRQ_EXT6),
 };
 
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xa4000000, 0, 16, /* IRLMSK */
-	  { 0, 0, 0, 0, CF, 0, 0, 0,
-	    0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } },
+	  { SCIF0, SCIF1, RTC, 0, CF, 0, TP, SMBUS,
+	    0, EXT6, EXT5, EXT4, EXT2, EXT1, PSW, AX88796 } },
 };
 
 static unsigned char irl2irq[HL_NR_IRL] __initdata = {
-	0, IRQ_CF, 0, 0,
-	0, 0, 0, 0,
-	0, IRQ_EXT4, 0, IRQ_EXT1,
+	0, IRQ_CF, IRQ_TP, IRQ_SCIF1,
+	IRQ_SCIF0, IRQ_SMBUS, IRQ_RTC, IRQ_EXT6,
+	IRQ_EXT5, IRQ_EXT4, IRQ_EXT2, IRQ_EXT1,
 	0, IRQ_AX88796, IRQ_PSW,
 };
 
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c
index 2f68bea7890c..a5c5e9236501 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/renesas/r7780rp/setup.c
@@ -4,7 +4,7 @@
  * Renesas Solutions Highlander Support.
  *
  * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005 - 2007 Paul Mundt
+ * Copyright (C) 2005 - 2008 Paul Mundt
  *
  * This contains support for the R7780RP-1, R7780MP, and R7785RP
  * Highlander modules.
@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/types.h>
+#include <linux/i2c.h>
 #include <net/ax88796.h>
 #include <asm/machvec.h>
 #include <asm/r7780rp.h>
@@ -176,11 +177,38 @@ static struct platform_device ax88796_device = {
 	.resource       = ax88796_resources,
 };
 
+static struct resource smbus_resources[] = {
+	[0] = {
+		.start	= PA_SMCR,
+		.end	= PA_SMCR + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_SMBUS,
+		.end	= IRQ_SMBUS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smbus_device = {
+	.name		= "i2c-highlander",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smbus_resources),
+	.resource	= smbus_resources,
+};
+
+static struct i2c_board_info __initdata highlander_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rtc-rs5c372", 0x32),
+		.type	= "r2025sd",
+	},
+};
 
 static struct platform_device *r7780rp_devices[] __initdata = {
 	&r8a66597_usb_host_device,
 	&m66592_usb_peripheral_device,
 	&heartbeat_device,
+	&smbus_device,
 #ifndef CONFIG_SH_R7780RP
 	&ax88796_device,
 #endif
@@ -199,12 +227,20 @@ static struct trapped_io cf_trapped_io = {
 
 static int __init r7780rp_devices_setup(void)
 {
+	int ret = 0;
+
 #ifndef CONFIG_SH_R7780RP
 	if (register_trapped_io(&cf_trapped_io) == 0)
-		platform_device_register(&cf_ide_device);
+		ret |= platform_device_register(&cf_ide_device);
 #endif
-	return platform_add_devices(r7780rp_devices,
+
+	ret |= platform_add_devices(r7780rp_devices,
 				    ARRAY_SIZE(r7780rp_devices));
+
+	ret |= i2c_register_board_info(0, highlander_i2c_devices,
+				       ARRAY_SIZE(highlander_i2c_devices));
+
+	return ret;
 }
 device_initcall(r7780rp_devices_setup);
 
diff --git a/arch/sh/boards/renesas/sh7710voipgw/Makefile b/arch/sh/boards/renesas/sh7710voipgw/Makefile
deleted file mode 100644
index 77037567633b..000000000000
--- a/arch/sh/boards/renesas/sh7710voipgw/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	 := setup.o
diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c
deleted file mode 100644
index 0d56fd83bcba..000000000000
--- a/arch/sh/boards/renesas/sh7710voipgw/setup.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Renesas Technology SH7710 VoIP Gateway
- *
- * Copyright (C) 2006  Ranjit Deshpande
- * Kenati Technologies Inc.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- */
-#include <linux/init.h>
-#include <asm/machvec.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-static struct ipr_data sh7710voipgw_ipr_map[] = {
-	{ TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY },
-	{ WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY },
-
-	/* SCIF0 */
-	{ SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-	{ SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-	{ SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-	{ SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-
-	/* DMAC-1 */
-	{ DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-
-	/* DMAC-2 */
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-	/* IPSEC */
-	{ IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY },
-
-	/* EDMAC */
-	{ EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, EDMAC0_PRIORITY },
-	{ EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, EDMAC1_PRIORITY },
-	{ EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, EDMAC2_PRIORITY },
-
-	/* SIOF0 */
-	{ SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-	/* SIOF1 */
-	{ SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
-	{ SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
-	{ SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
-	{ SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
-
-	/* SLIC IRQ's */
-	{ IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
-	{ IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-static void __init sh7710voipgw_init_irq(void)
-{
-	/* Disable all interrupts in IPR registers */
-	ctrl_outw(0x0, INTC_IPRA);
-	ctrl_outw(0x0, INTC_IPRB);
-	ctrl_outw(0x0, INTC_IPRC);
-	ctrl_outw(0x0, INTC_IPRD);
-	ctrl_outw(0x0, INTC_IPRE);
-	ctrl_outw(0x0, INTC_IPRF);
-	ctrl_outw(0x0, INTC_IPRG);
-	ctrl_outw(0x0, INTC_IPRH);
-	ctrl_outw(0x0, INTC_IPRI);
-
-	/* Ack all interrupt sources in the IRR0 register */
-	ctrl_outb(0x3f, INTC_IRR0);
-
-	/* Use IRQ0 - IRQ3 as active low interrupt lines i.e. disable
-	 * IRL mode.
-	 */
-	ctrl_outw(0x2aa, INTC_ICR1);
-
-	make_ipr_irq(sh7710voipgw_ipr_map, ARRAY_SIZE(sh7710voipgw_ipr_map));
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7710voipgw __initmv = {
-	.mv_name		= "SH7710 VoIP Gateway",
-	.mv_nr_irqs		= 104,
-	.mv_init_irq		= sh7710voipgw_init_irq,
-};
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/renesas/x3proto/ilsel.c
index 6d4454fef97c..b5c673c39337 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/renesas/x3proto/ilsel.c
@@ -68,7 +68,7 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
 	shift = mk_ilsel_shift(bit);
 
 	pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n",
-		 __FUNCTION__, bit, addr, shift, set);
+		 __func__, bit, addr, shift, set);
 
 	tmp = ctrl_inw(addr);
 	tmp &= ~(0xf << shift);
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/se/7721/Makefile
new file mode 100644
index 000000000000..7f09030980b3
--- /dev/null
+++ b/arch/sh/boards/se/7721/Makefile
@@ -0,0 +1 @@
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c
new file mode 100644
index 000000000000..c4fdd622bf8b
--- /dev/null
+++ b/arch/sh/boards/se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <asm/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c
new file mode 100644
index 000000000000..1be3e92752f7
--- /dev/null
+++ b/arch/sh/boards/se/7721/setup.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <asm/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	return platform_add_devices(se7721_devices,
+		ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
+	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
+	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
+	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_nr_irqs		= 109,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
index b1a3d9d0172f..33f6ee71f848 100644
--- a/arch/sh/boards/se/7722/setup.c
+++ b/arch/sh/boards/se/7722/setup.c
@@ -13,10 +13,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
+#include <linux/input.h>
 #include <asm/machvec.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
 
 /* Heartbeat */
 static struct heartbeat_data heartbeat_data = {
@@ -92,10 +94,47 @@ static struct platform_device cf_ide_device  = {
 	.resource       = cf_ide_resources,
 };
 
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
 static struct platform_device *se7722_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_eth_device,
 	&cf_ide_device,
+	&sh_keysc_device,
 };
 
 static int __init se7722_devices_setup(void)
@@ -136,6 +175,8 @@ static void __init se7722_setup(char **cmdline_p)
 	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
 	ctrl_outw(0x0000, PORT_PYCR);
 	ctrl_outw(0x0000, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
 }
 
 /*
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/superh/microdev/io.c
index b704e20d7e4d..9f8a540f7e14 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/superh/microdev/io.c
@@ -127,7 +127,7 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 			 *	safe default.
 			 */
 		printk("Warning: unexpected port in %s( offset = 0x%lx )\n",
-		       __FUNCTION__, offset);
+		       __func__, offset);
 		result = PVR;
 	}
 
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 59f552c13349..89b408620dcb 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -32,19 +32,19 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE
 $(obj)/compressed/vmlinux: FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
-KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%8x" \
+KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
 			$(CONFIG_ZERO_PAGE_OFFSET)]')
 
-KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%8x" \
+KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
 			$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
-		   -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
+		   -C gzip -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \
 		   -n 'Linux-$(KERNELRELEASE)' -d $< $@
 
 $(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE
diff --git a/arch/sh/boot/compressed/head_32.S b/arch/sh/boot/compressed/head_32.S
index a8399b013729..06ac31f3be88 100644
--- a/arch/sh/boot/compressed/head_32.S
+++ b/arch/sh/boot/compressed/head_32.S
@@ -7,7 +7,6 @@
 
 .text
 
-#include <linux/linkage.h>
 #include <asm/page.h>
 
 	.global	startup
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index 1d4ecbfc767c..f72c1989f5f2 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -13,7 +13,6 @@
  * Modification for compressed loader:
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
-#include <linux/linkage.h>
 #include <asm/cache.h>
 #include <asm/cpu/mmu_context.h>
 #include <asm/cpu/registers.h>
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 2ad804ec920a..1a072615ffd4 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc2
-# Tue Nov 13 20:32:39 2007
+# Linux kernel version: 2.6.25-rc4
+# Thu Mar  6 15:39:59 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -19,6 +20,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -37,17 +40,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -61,17 +67,27 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
@@ -98,6 +114,8 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -105,7 +123,9 @@ CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -114,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -122,12 +143,16 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -137,7 +162,8 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_32BIT is not set
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -153,6 +179,7 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -190,6 +217,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
+# CONFIG_SH_SDK7780 is not set
 CONFIG_SH_HIGHLANDER=y
 # CONFIG_SH_R7780RP is not set
 CONFIG_SH_R7780MP=y
@@ -234,12 +262,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 
 #
@@ -284,6 +313,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -344,6 +374,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -386,7 +417,7 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -394,6 +425,8 @@ CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -453,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -506,6 +540,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -538,7 +573,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -551,7 +585,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
-# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,6 +609,7 @@ CONFIG_8139TOO=m
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 CONFIG_8139TOO_8129=y
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -591,6 +625,9 @@ CONFIG_E1000=m
 # CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -616,6 +653,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -629,7 +667,6 @@ CONFIG_NETDEV_10000=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -686,6 +723,7 @@ CONFIG_SERIO_LIBPS2=y
 #
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -722,6 +760,7 @@ CONFIG_DEVPORT=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -736,6 +775,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
 # CONFIG_WATCHDOG is not set
 
 #
@@ -800,12 +840,9 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
@@ -830,9 +867,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -867,12 +905,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -920,8 +956,10 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -997,10 +1035,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1035,9 +1069,9 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1059,6 +1093,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -1077,6 +1112,9 @@ CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -1091,13 +1129,16 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
 # CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
new file mode 100644
index 000000000000..f3d4ca0caa46
--- /dev/null
+++ b/arch/sh/configs/se7721_defconfig
@@ -0,0 +1,1085 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc5
+# Fri Mar 21 12:05:31 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+# CONFIG_BUG is not set
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+CONFIG_MODULES=y
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH3=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+CONFIG_CPU_SUBTYPE_SH7721=y
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_SH_FPU_EMU is not set
+# CONFIG_SH_DSP is not set
+# CONFIG_SH_ADC is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7721_SOLUTION_ENGINE=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
+
+#
+# Bus options
+#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+CONFIG_INET_XFRM_TUNNEL=y
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=y
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=y
+CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=y
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=y
+CONFIG_NET_SCH_TBF=y
+CONFIG_NET_SCH_GRED=y
+CONFIG_NET_SCH_DSMARK=y
+CONFIG_NET_SCH_NETEM=y
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=y
+CONFIG_NET_CLS_ROUTE4=y
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=y
+# CONFIG_NET_CLS_U32 is not set
+# CONFIG_NET_CLS_RSVP is not set
+# CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PLATFORM=y
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index f68743dc3931..30f5ee40c312 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,9 +1,10 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc3
-# Thu Mar 15 14:06:20 2007
+# Linux kernel version: 2.6.25-rc3
+# Thu Feb 28 10:18:04 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,38 +12,44 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 # CONFIG_EXPERIMENTAL is not set
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
@@ -52,31 +59,36 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 
 #
@@ -91,68 +103,27 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-CONFIG_SH_7780_SOLUTION_ENGINE=y
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -161,52 +132,58 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x08000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,20 +191,29 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC2_IRQ=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7780_SOLUTION_ENGINE=y
+# CONFIG_SH_SDK7780 is not set
+# CONFIG_SH_HIGHLANDER is not set
 
 #
 # Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=28
-# CONFIG_NO_IDLE_HZ is not set
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -242,7 +228,6 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -258,40 +243,36 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SMP is not set
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00810000
-# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
 
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
@@ -302,7 +283,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -329,6 +309,7 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -349,16 +330,13 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -366,9 +344,18 @@ CONFIG_IPV6=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
 
 #
 # Device Drivers
@@ -380,15 +367,7 @@ CONFIG_IPV6=y
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -407,6 +386,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -437,13 +417,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -461,31 +441,15 @@ CONFIG_MTD_ROM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -497,15 +461,12 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -513,6 +474,7 @@ CONFIG_BLK_DEV_LOOP=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -533,6 +495,7 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -540,12 +503,9 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
@@ -555,7 +515,6 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
@@ -566,6 +525,7 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -577,10 +537,6 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_AHCI is not set
@@ -597,62 +553,48 @@ CONFIG_SATA_SIL=y
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
 # CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_EFAR is not set
 # CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SERVERWORKS is not set
 # CONFIG_PATA_PDC2027X is not set
 # CONFIG_PATA_SIL680 is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# An alternative FireWire stack is available with EXPERIMENTAL=y
 #
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 CONFIG_PHYLIB=y
 
 #
@@ -666,85 +608,59 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
-
-#
-# Tulip family network device support
-#
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -752,15 +668,7 @@ CONFIG_NET_PCI=y
 # CONFIG_NET_FC is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -768,6 +676,7 @@ CONFIG_NET_PCI=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -777,7 +686,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -787,6 +695,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -821,31 +730,12 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 
 #
@@ -853,18 +743,27 @@ CONFIG_UNIX98_PTYS=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -875,23 +774,27 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -899,14 +802,13 @@ CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_TILEBLITTING is not set
 
 #
-# Frambuffer hardware drivers
+# Frame buffer hardware drivers
 #
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
-# CONFIG_FB_EPSON1355 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_NVIDIA is not set
 # CONFIG_FB_RIVA is not set
@@ -920,22 +822,27 @@ CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 # CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -958,39 +865,38 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ICH is not set
 # CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# USB support
+# USB Input Devices
 #
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
 
 #
 # USB Host Controller Drivers
 #
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -998,6 +904,7 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
@@ -1015,49 +922,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1078,67 +956,17 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
 # CONFIG_INFINIBAND is not set
+# CONFIG_RTC_CLASS is not set
 
 #
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1151,12 +979,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1181,14 +1008,14 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
+CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1197,14 +1024,13 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1225,10 +1051,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1275,13 +1097,15 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -1290,11 +1114,48 @@ CONFIG_LOG_BUF_SHIFT=14
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
@@ -1302,9 +1163,12 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index 9380c321169a..37e49a589207 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,40 +1,55 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 12:48:56 2006
+# Linux kernel version: 2.6.25-rc4
+# Thu Mar  6 16:02:29 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +61,39 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -86,59 +107,26 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-CONFIG_SH_7710VOIPGW=y
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 CONFIG_CPU_SUBTYPE_SH7710=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -147,65 +135,84 @@ CONFIG_CPU_SUBTYPE_SH7710=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x00800000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_ADC is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_SOLUTION_ENGINE is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=32768000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -220,56 +227,51 @@ CONFIG_SH_PCLK_FREQ=32768000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -277,13 +279,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -301,14 +304,13 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-
-#
-# IP: Virtual Server Configuration
-#
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
@@ -316,44 +318,24 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-CONFIG_IP_NF_PPTP=m
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 # CONFIG_IP_NF_QUEUE is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -366,14 +348,7 @@ CONFIG_IP_NF_PPTP=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -382,6 +357,7 @@ CONFIG_NET_SCH_CBQ=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
+# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -389,7 +365,6 @@ CONFIG_NET_SCH_CBQ=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -405,20 +380,31 @@ CONFIG_NET_CLS_U32=y
 # CONFIG_CLS_U32_MARK is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
 # CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -427,19 +413,12 @@ CONFIG_NET_ESTIMATOR=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
@@ -451,12 +430,14 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -482,7 +463,6 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -505,40 +485,25 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -546,104 +511,59 @@ CONFIG_MTD_RAM=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 CONFIG_PHONE=y
-# CONFIG_PHONE_IXJ is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -653,6 +573,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -684,35 +605,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
 
 #
@@ -720,119 +617,86 @@ CONFIG_HW_RANDOM=y
 #
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Misc devices
+# Multifunction device drivers
 #
+# CONFIG_MFD_SM501 is not set
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -861,7 +725,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -874,26 +737,26 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -901,55 +764,97 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_KGDB is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_SEQIV is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h
index 07e29506080f..a83dcf70c13b 100644
--- a/arch/sh/drivers/pci/pci-sh4.h
+++ b/arch/sh/drivers/pci/pci-sh4.h
@@ -15,8 +15,6 @@
 #define PCI_PROBE_BIOS		1
 #define PCI_PROBE_CONF1		2
 #define PCI_PROBE_CONF2		4
-#define PCI_NO_SORT		0x100
-#define PCI_BIOS_SORT		0x200
 #define PCI_NO_CHECKS		0x400
 #define PCI_ASSIGN_ROMS		0x1000
 #define PCI_BIOS_IRQ_SCAN	0x2000
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 62bf373266f7..4bbdce36b92b 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -5,7 +5,7 @@
 extra-y	:= head_32.o init_task.o vmlinux.lds
 
 obj-y	:= debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \
-	   ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \
+	   ptrace_32.o setup.o signal_32.o sys_sh.o sys_sh32.o \
 	   syscalls_32.o time_32.o topology.o traps.o traps_32.o
 
 obj-y				+= cpu/ timers/
diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64
index e01283d49cbf..6edf53b93d94 100644
--- a/arch/sh/kernel/Makefile_64
+++ b/arch/sh/kernel/Makefile_64
@@ -1,7 +1,7 @@
 extra-y	:= head_64.o init_task.o vmlinux.lds
 
 obj-y	:= debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \
-	   ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \
+	   ptrace_64.o setup.o signal_64.o sys_sh.o sys_sh64.o \
 	   syscalls_64.o time_64.o topology.o traps.o traps_64.o
 
 obj-y				+= cpu/ timers/
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 1c3b99642e1c..01ff4d05aab0 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -83,6 +83,8 @@ static int __init cf_init_default(void)
 #include <asm/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
 #include <asm/se7722.h>
+#elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
+#include <asm/se7721.h>
 #endif
 
 /*
@@ -99,7 +101,9 @@ static int __init cf_init_default(void)
  * 0xB0600000 : I/O
  */
 
-#if defined(CONFIG_SH_SOLUTION_ENGINE) || defined(CONFIG_SH_7722_SOLUTION_ENGINE) 
+#if defined(CONFIG_SH_SOLUTION_ENGINE) || \
+    defined(CONFIG_SH_7722_SOLUTION_ENGINE) || \
+    defined(CONFIG_SH_7721_SOLUTION_ENGINE)
 static int __init cf_init_se(void)
 {
 	if ((ctrl_inw(MRSHPC_CSR) & 0x000c) != 0)
@@ -112,7 +116,7 @@ static int __init cf_init_se(void)
 	}
 
 	/*
-	 *  PC-Card window open 
+	 *  PC-Card window open
 	 *  flag == COMMON/ATTRIBUTE/IO
 	 */
 	/* common window open */
@@ -122,7 +126,7 @@ static int __init cf_init_se(void)
 		ctrl_outw(0x0b00, MRSHPC_MW0CR2);
 	else
 		/* common mode & bus width 16bit SWAP = 0*/
-		ctrl_outw(0x0300, MRSHPC_MW0CR2); 
+		ctrl_outw(0x0300, MRSHPC_MW0CR2);
 
 	/* attribute window open */
 	ctrl_outw(0x8a85, MRSHPC_MW1CR1);
@@ -155,10 +159,9 @@ static int __init cf_init_se(void)
 
 int __init cf_init(void)
 {
-	if( mach_is_se() || mach_is_7722se() ){
+	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();
-	}
-	
+
 	return cf_init_default();
 }
 
diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c
index 80a31329ead9..75fb03d35670 100644
--- a/arch/sh/kernel/cpu/init.c
+++ b/arch/sh/kernel/cpu/init.c
@@ -233,7 +233,7 @@ static void __init dsp_init(void)
  * and cache configuration in detect_cpu_and_cache_system().
  */
 
-asmlinkage void __cpuinit sh_cpu_init(void)
+asmlinkage void __init sh_cpu_init(void)
 {
 	current_thread_info()->cpu = hard_smp_processor_id();
 
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 7a26569e7956..0fc89069d8c7 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -267,7 +267,6 @@ ENTRY(sh_bios_handler)
 
 ENTRY(address_error_trap_handler)
 	mov	r15,r4				! regs
-	add	#4,r4
 	mov	#OFF_PC,r0
 	mov.l	@(r0,r15),r6			! pc
 	mov.l	1f,r0
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index b279cdc3a233..7e2b90cfa7bf 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -8,6 +8,7 @@ common-y	+= $(addprefix ../sh2/, ex.o entry.o)
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
-obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7206)	+= setup-sh7206.o clock-sh7206.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7203)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7263)	+= setup-sh7203.o clock-sh7203.o
+obj-$(CONFIG_CPU_SUBTYPE_MXG)		+= setup-mxg.o clock-sh7206.o
diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c
index ff99562456fb..5627c0b3ffa8 100644
--- a/arch/sh/kernel/cpu/sh2a/fpu.c
+++ b/arch/sh/kernel/cpu/sh2a/fpu.c
@@ -13,6 +13,7 @@
 #include <linux/signal.h>
 #include <asm/processor.h>
 #include <asm/io.h>
+#include <asm/fpu.h>
 
 /* The PR (precision) bit in the FP Status Register must be clear when
  * an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c
index 6910e2664468..6e79132f6f30 100644
--- a/arch/sh/kernel/cpu/sh2a/probe.c
+++ b/arch/sh/kernel/cpu/sh2a/probe.c
@@ -29,6 +29,9 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.type			= CPU_SH7206;
 	/* While SH7206 has a DSP.. */
 	boot_cpu_data.flags			|= CPU_HAS_DSP;
+#elif defined(CONFIG_CPU_SUBTYPE_MXG)
+	boot_cpu_data.type			= CPU_MXG;
+	boot_cpu_data.flags			|= CPU_HAS_DSP;
 #endif
 
 	boot_cpu_data.dcache.ways		= 4;
diff --git a/arch/sh/kernel/cpu/sh2a/setup-mxg.c b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
new file mode 100644
index 000000000000..e611d79fac4c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/setup-mxg.c
@@ -0,0 +1,168 @@
+/*
+ * Renesas MX-G (R8A03022BG) Setup
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/serial_sci.h>
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	IRQ8, IRQ9, IRQ10, IRQ11, IRQ12, IRQ13, IRQ14, IRQ15,
+
+	PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7,
+
+	SINT8, SINT7, SINT6, SINT5, SINT4, SINT3, SINT2, SINT1,
+
+	SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI,
+	SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI,
+
+	MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
+	MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F,
+	MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U,
+	MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
+	MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V,
+	MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V,
+	MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W,
+
+	/* interrupt groups */
+	PINT, SCIF0, SCIF1,
+	MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3, MTU2_GROUP4, MTU2_GROUP5
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65),
+	INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67),
+	INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69),
+	INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71),
+	INTC_IRQ(IRQ8, 72), INTC_IRQ(IRQ9, 73),
+	INTC_IRQ(IRQ10, 74), INTC_IRQ(IRQ11, 75),
+	INTC_IRQ(IRQ12, 76), INTC_IRQ(IRQ13, 77),
+	INTC_IRQ(IRQ14, 78), INTC_IRQ(IRQ15, 79),
+
+	INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81),
+	INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83),
+	INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85),
+	INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87),
+
+	INTC_IRQ(SINT8, 94), INTC_IRQ(SINT7, 95),
+	INTC_IRQ(SINT6, 96), INTC_IRQ(SINT5, 97),
+	INTC_IRQ(SINT4, 98), INTC_IRQ(SINT3, 99),
+	INTC_IRQ(SINT2, 100), INTC_IRQ(SINT1, 101),
+
+	INTC_IRQ(SCIF0_RXI, 220), INTC_IRQ(SCIF0_TXI, 221),
+	INTC_IRQ(SCIF0_BRI, 222), INTC_IRQ(SCIF0_ERI, 223),
+	INTC_IRQ(SCIF1_RXI, 224), INTC_IRQ(SCIF1_TXI, 225),
+	INTC_IRQ(SCIF1_BRI, 226), INTC_IRQ(SCIF1_ERI, 227),
+
+	INTC_IRQ(MTU2_TGI0A, 228), INTC_IRQ(MTU2_TGI0B, 229),
+	INTC_IRQ(MTU2_TGI0C, 230), INTC_IRQ(MTU2_TGI0D, 231),
+	INTC_IRQ(MTU2_TCI0V, 232), INTC_IRQ(MTU2_TGI0E, 233),
+
+	INTC_IRQ(MTU2_TGI0F, 234), INTC_IRQ(MTU2_TGI1A, 235),
+	INTC_IRQ(MTU2_TGI1B, 236), INTC_IRQ(MTU2_TCI1V, 237),
+	INTC_IRQ(MTU2_TCI1U, 238), INTC_IRQ(MTU2_TGI2A, 239),
+
+	INTC_IRQ(MTU2_TGI2B, 240), INTC_IRQ(MTU2_TCI2V, 241),
+	INTC_IRQ(MTU2_TCI2U, 242), INTC_IRQ(MTU2_TGI3A, 243),
+
+	INTC_IRQ(MTU2_TGI3B, 244),
+	INTC_IRQ(MTU2_TGI3C, 245),
+
+	INTC_IRQ(MTU2_TGI3D, 246), INTC_IRQ(MTU2_TCI3V, 247),
+	INTC_IRQ(MTU2_TGI4A, 248), INTC_IRQ(MTU2_TGI4B, 249),
+	INTC_IRQ(MTU2_TGI4C, 250), INTC_IRQ(MTU2_TGI4D, 251),
+
+	INTC_IRQ(MTU2_TCI4V, 252), INTC_IRQ(MTU2_TGI5U, 253),
+	INTC_IRQ(MTU2_TGI5V, 254), INTC_IRQ(MTU2_TGI5W, 255),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3,
+		   PINT4, PINT5, PINT6, PINT7),
+	INTC_GROUP(MTU2_GROUP1, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D,
+		   MTU2_TCI0V, MTU2_TGI0E),
+	INTC_GROUP(MTU2_GROUP2, MTU2_TGI0F, MTU2_TGI1A, MTU2_TGI1B,
+		   MTU2_TCI1V, MTU2_TCI1U, MTU2_TGI2A),
+	INTC_GROUP(MTU2_GROUP3, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U,
+		   MTU2_TGI3A),
+	INTC_GROUP(MTU2_GROUP4, MTU2_TGI3D, MTU2_TCI3V, MTU2_TGI4A,
+		   MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D),
+	INTC_GROUP(MTU2_GROUP5, MTU2_TCI4V, MTU2_TGI5U, MTU2_TGI5V, MTU2_TGI5W),
+	INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI),
+	INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xfffd9418, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } },
+	{ 0xfffd941a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } },
+	{ 0xfffd941c, 0, 16, 4, /* IPR03 */ { IRQ8, IRQ9, IRQ10, IRQ11 } },
+	{ 0xfffd941e, 0, 16, 4, /* IPR04 */ { IRQ12, IRQ13, IRQ14, IRQ15 } },
+	{ 0xfffd9420, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } },
+	{ 0xfffd9800, 0, 16, 4, /* IPR06 */ { } },
+	{ 0xfffd9802, 0, 16, 4, /* IPR07 */ { } },
+	{ 0xfffd9804, 0, 16, 4, /* IPR08 */ { } },
+	{ 0xfffd9806, 0, 16, 4, /* IPR09 */ { } },
+	{ 0xfffd9808, 0, 16, 4, /* IPR10 */ { } },
+	{ 0xfffd980a, 0, 16, 4, /* IPR11 */ { } },
+	{ 0xfffd980c, 0, 16, 4, /* IPR12 */ { } },
+	{ 0xfffd980e, 0, 16, 4, /* IPR13 */ { } },
+	{ 0xfffd9810, 0, 16, 4, /* IPR14 */ { 0, 0, 0, SCIF0 } },
+	{ 0xfffd9812, 0, 16, 4, /* IPR15 */
+		{ SCIF1, MTU2_GROUP1, MTU2_GROUP2, MTU2_GROUP3 } },
+	{ 0xfffd9814, 0, 16, 4, /* IPR16 */
+		{ MTU2_TGI3B, MTU2_TGI3C, MTU2_GROUP4, MTU2_GROUP5 } },
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xfffd9408, 0, 16, /* PINTER */
+	  { 0, 0, 0, 0, 0, 0, 0, 0,
+	    PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "mxg", vectors, groups,
+			 mask_registers, prio_registers, NULL);
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xff804000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 223, 220, 221, 222 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct platform_device *mxg_devices[] __initdata = {
+	&sci_device,
+};
+
+static int __init mxg_devices_setup(void)
+{
+	return platform_add_devices(mxg_devices,
+				    ARRAY_SIZE(mxg_devices));
+}
+__initcall(mxg_devices_setup);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 817f9939cda6..8020796139f1 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -16,6 +16,7 @@
 #include <asm/cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
+#include <asm/fpu.h>
 
 /* The PR (precision) bit in the FP Status Register must be clear when
  * an frchg instruction is executed, otherwise the instruction is undefined.
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index 9e89984c4f1d..ebceb0dadff5 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -53,7 +53,7 @@ int __init detect_cpu_and_cache_system(void)
 	/*
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
-	if (((pvr >> 16) & 0xff) == 0x10) {
+	if (((pvr >> 24) & 0xff) == 0x10) {
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 
@@ -126,17 +126,22 @@ int __init detect_cpu_and_cache_system(void)
 					  CPU_HAS_LLSC;
 		break;
 	case 0x3008:
-		if (prr == 0xa0 || prr == 0xa1) {
-			boot_cpu_data.type = CPU_SH7722;
-			boot_cpu_data.icache.ways = 4;
-			boot_cpu_data.dcache.ways = 4;
-			boot_cpu_data.flags |= CPU_HAS_LLSC;
-		}
-		else if (prr == 0x70) {
+		boot_cpu_data.icache.ways = 4;
+		boot_cpu_data.dcache.ways = 4;
+		boot_cpu_data.flags |= CPU_HAS_LLSC;
+
+		switch (prr) {
+		case 0x50:
+			boot_cpu_data.type = CPU_SH7723;
+			boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
+			break;
+		case 0x70:
 			boot_cpu_data.type = CPU_SH7366;
-			boot_cpu_data.icache.ways = 4;
-			boot_cpu_data.dcache.ways = 4;
-			boot_cpu_data.flags |= CPU_HAS_LLSC;
+			break;
+		case 0xa0:
+		case 0xa1:
+			boot_cpu_data.type = CPU_SH7722;
+			break;
 		}
 		break;
 	case 0x4000:	/* 1st cut */
@@ -215,6 +220,12 @@ int __init detect_cpu_and_cache_system(void)
 	 * SH-4A's have an optional PIPT L2.
 	 */
 	if (boot_cpu_data.flags & CPU_HAS_L2_CACHE) {
+		/* Bug if we can't decode the L2 info */
+		BUG_ON(!(cvr & 0xf));
+
+		/* Silicon and specifications have clearly never met.. */
+		cvr ^= 0xf;
+
 		/*
 		 * Size calculation is much more sensible
 		 * than it is for the L1.
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 8250e017bd4e..9561b02ade0e 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -216,7 +216,7 @@ void sq_unmap(unsigned long vaddr)
 
 	if (unlikely(!map)) {
 		printk("%s: bad store queue address 0x%08lx\n",
-		       __FUNCTION__, vaddr);
+		       __func__, vaddr);
 		return;
 	}
 
@@ -233,7 +233,7 @@ void sq_unmap(unsigned long vaddr)
 		vma = remove_vm_area((void *)(map->sq_addr & PAGE_MASK));
 		if (!vma) {
 			printk(KERN_ERR "%s: bad address 0x%08lx\n",
-			       __FUNCTION__, map->sq_addr);
+			       __func__, map->sq_addr);
 			return;
 		}
 	}
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index 5d890ac8e793..a880e7968750 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
 obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
 
@@ -22,6 +23,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SHX3)	:= clock-shx3.o
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index b98b4bc93ec9..069314037049 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -16,13 +16,12 @@
 
 static struct resource usbf_resources[] = {
 	[0] = {
-		.name	= "m66592_udc",
-		.start	= 0xA4480000,
-		.end	= 0xA44800FF,
+		.name	= "USBF",
+		.start	= 0x04480000,
+		.end	= 0x044800FF,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.name	= "m66592_udc",
 		.start	= 65,
 		.end	= 65,
 		.flags	= IORESOURCE_IRQ,
@@ -40,6 +39,26 @@ static struct platform_device usbf_device = {
 	.resource	= usbf_resources,
 };
 
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -74,6 +93,7 @@ static struct platform_device sci_device = {
 
 static struct platform_device *sh7722_devices[] __initdata = {
 	&usbf_device,
+	&iic_device,
 	&sci_device,
 };
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
new file mode 100644
index 000000000000..16925cf28db8
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -0,0 +1,300 @@
+/*
+ * SH7723 Setup
+ *
+ *  Copyright (C) 2008  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/serial.h>
+#include <linux/mm.h>
+#include <linux/serial_sci.h>
+#include <asm/mmzone.h>
+
+static struct plat_sci_port sci_platform_data[] = {
+	{
+		.mapbase	= 0xa4e30000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 56, 56, 56, 56 },
+	},{
+		.mapbase	= 0xa4e40000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 88, 88, 88, 88 },
+	},{
+		.mapbase	= 0xa4e50000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCI,
+		.irqs		= { 109, 109, 109, 109 },
+	}, {
+		.flags = 0,
+	}
+};
+
+static struct platform_device sci_device = {
+	.name		= "sh-sci",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= sci_platform_data,
+	},
+};
+
+static struct resource rtc_resources[] = {
+	[0] = {
+		.start	= 0xa465fec0,
+		.end	= 0xa465fec0 + 0x58 - 1,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		/* Period IRQ */
+		.start	= 69,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* Carry IRQ */
+		.start	= 70,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		/* Alarm IRQ */
+		.start	= 68,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "sh-rtc",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rtc_resources),
+	.resource	= rtc_resources,
+};
+
+static struct platform_device *sh7723_devices[] __initdata = {
+	&sci_device,
+	&rtc_device,
+};
+
+static int __init sh7723_devices_setup(void)
+{
+	return platform_add_devices(sh7723_devices,
+				    ARRAY_SIZE(sh7723_devices));
+}
+__initcall(sh7723_devices_setup);
+
+enum {
+	UNUSED=0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	HUDI,
+	DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3,
+	_2DG_TRI,_2DG_INI,_2DG_CEI,
+	DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3,
+	VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI,
+	SCIFA_SCIFA0,
+	VPU_VPUI,
+	TPU_TPUI,
+	ADC_ADI,
+	USB_USI0,
+	RTC_ATI,RTC_PRI,RTC_CUI,
+	DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR,
+	DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR,
+	KEYSC_KEYI,
+	SCIF_SCIF0,SCIF_SCIF1,SCIF_SCIF2,
+	MSIOF_MSIOFI0,MSIOF_MSIOFI1,
+	SCIFA_SCIFA1,
+	FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I,
+	I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI,
+	SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2,
+	CMT_CMTI,
+	TSIF_TSIFI,
+	SIU_SIUI,
+	SCIFA_SCIFA2,
+	TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2,
+	IRDA_IRDAI,
+	ATAPI_ATAPII,
+	SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2,
+	VEU2H1_VEU2HI,
+	LCDC_LCDCI,
+	TMU1_TUNI0,TMU1_TUNI1,TMU1_TUNI2,
+
+	/* interrupt groups */
+	DMAC1A, DMAC0A, VIO, DMAC0B, FLCTL, I2C, _2DG,
+	SDHI1, RTC, DMAC1B, SDHI0,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+
+	INTC_VECT(DMAC1A_DEI0,0x700),
+	INTC_VECT(DMAC1A_DEI1,0x720),
+	INTC_VECT(DMAC1A_DEI2,0x740),
+	INTC_VECT(DMAC1A_DEI3,0x760),
+
+	INTC_VECT(_2DG_TRI, 0x780),
+	INTC_VECT(_2DG_INI, 0x7A0),
+	INTC_VECT(_2DG_CEI, 0x7C0),
+
+	INTC_VECT(DMAC0A_DEI0,0x800),
+	INTC_VECT(DMAC0A_DEI1,0x820),
+	INTC_VECT(DMAC0A_DEI2,0x840),
+	INTC_VECT(DMAC0A_DEI3,0x860),
+
+	INTC_VECT(VIO_CEUI,0x880),
+	INTC_VECT(VIO_BEUI,0x8A0),
+	INTC_VECT(VIO_VEU2HI,0x8C0),
+	INTC_VECT(VIO_VOUI,0x8E0),
+
+	INTC_VECT(SCIFA_SCIFA0,0x900),
+	INTC_VECT(VPU_VPUI,0x920),
+	INTC_VECT(TPU_TPUI,0x9A0),
+	INTC_VECT(ADC_ADI,0x9E0),
+	INTC_VECT(USB_USI0,0xA20),
+
+	INTC_VECT(RTC_ATI,0xA80),
+	INTC_VECT(RTC_PRI,0xAA0),
+	INTC_VECT(RTC_CUI,0xAC0),
+
+	INTC_VECT(DMAC1B_DEI4,0xB00),
+	INTC_VECT(DMAC1B_DEI5,0xB20),
+	INTC_VECT(DMAC1B_DADERR,0xB40),
+
+	INTC_VECT(DMAC0B_DEI4,0xB80),
+	INTC_VECT(DMAC0B_DEI5,0xBA0),
+	INTC_VECT(DMAC0B_DADERR,0xBC0),
+
+	INTC_VECT(KEYSC_KEYI,0xBE0),
+	INTC_VECT(SCIF_SCIF0,0xC00),
+	INTC_VECT(SCIF_SCIF1,0xC20),
+	INTC_VECT(SCIF_SCIF2,0xC40),
+	INTC_VECT(MSIOF_MSIOFI0,0xC80),
+	INTC_VECT(MSIOF_MSIOFI1,0xCA0),
+	INTC_VECT(SCIFA_SCIFA1,0xD00),
+
+	INTC_VECT(FLCTL_FLSTEI,0xD80),
+	INTC_VECT(FLCTL_FLTENDI,0xDA0),
+	INTC_VECT(FLCTL_FLTREQ0I,0xDC0),
+	INTC_VECT(FLCTL_FLTREQ1I,0xDE0),
+
+	INTC_VECT(I2C_ALI,0xE00),
+	INTC_VECT(I2C_TACKI,0xE20),
+	INTC_VECT(I2C_WAITI,0xE40),
+	INTC_VECT(I2C_DTEI,0xE60),
+
+	INTC_VECT(SDHI0_SDHII0,0xE80),
+	INTC_VECT(SDHI0_SDHII1,0xEA0),
+	INTC_VECT(SDHI0_SDHII2,0xEC0),
+
+	INTC_VECT(CMT_CMTI,0xF00),
+	INTC_VECT(TSIF_TSIFI,0xF20),
+	INTC_VECT(SIU_SIUI,0xF80),
+	INTC_VECT(SCIFA_SCIFA2,0xFA0),
+
+	INTC_VECT(TMU0_TUNI0,0x400),
+	INTC_VECT(TMU0_TUNI1,0x420),
+	INTC_VECT(TMU0_TUNI2,0x440),
+
+	INTC_VECT(IRDA_IRDAI,0x480),
+	INTC_VECT(ATAPI_ATAPII,0x4A0),
+
+	INTC_VECT(SDHI1_SDHII0,0x4E0),
+	INTC_VECT(SDHI1_SDHII1,0x500),
+	INTC_VECT(SDHI1_SDHII2,0x520),
+
+	INTC_VECT(VEU2H1_VEU2HI,0x560),
+	INTC_VECT(LCDC_LCDCI,0x580),
+
+	INTC_VECT(TMU1_TUNI0,0x920),
+	INTC_VECT(TMU1_TUNI1,0x940),
+	INTC_VECT(TMU1_TUNI2,0x960),
+
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC1A,DMAC1A_DEI0,DMAC1A_DEI1,DMAC1A_DEI2,DMAC1A_DEI3),
+	INTC_GROUP(DMAC0A,DMAC0A_DEI0,DMAC0A_DEI1,DMAC0A_DEI2,DMAC0A_DEI3),
+	INTC_GROUP(VIO, VIO_CEUI,VIO_BEUI,VIO_VEU2HI,VIO_VOUI),
+	INTC_GROUP(DMAC0B, DMAC0B_DEI4,DMAC0B_DEI5,DMAC0B_DADERR),
+	INTC_GROUP(FLCTL,FLCTL_FLSTEI,FLCTL_FLTENDI,FLCTL_FLTREQ0I,FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C,I2C_ALI,I2C_TACKI,I2C_WAITI,I2C_DTEI),
+	INTC_GROUP(_2DG, _2DG_TRI,_2DG_INI,_2DG_CEI),
+	INTC_GROUP(SDHI1, SDHI1_SDHII0,SDHI1_SDHII1,SDHI1_SDHII2),
+	INTC_GROUP(RTC, RTC_ATI,RTC_PRI,RTC_CUI),
+	INTC_GROUP(DMAC1B, DMAC1B_DEI4,DMAC1B_DEI5,DMAC1B_DADERR),
+	INTC_GROUP(SDHI0,SDHI0_SDHII0,SDHI0_SDHII1,SDHI0_SDHII2),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */
+	  { 0,  TMU1_TUNI2,TMU1_TUNI1,TMU1_TUNI0,0,SDHI1_SDHII2,SDHI1_SDHII1,SDHI1_SDHII0} },
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VIO_VOUI, VIO_VEU2HI,VIO_BEUI,VIO_CEUI,DMAC0A_DEI3,DMAC0A_DEI2,DMAC0A_DEI1,DMAC0A_DEI0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU_VPUI,0,0,0,SCIFA_SCIFA0 } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { DMAC1A_DEI3,DMAC1A_DEI2,DMAC1A_DEI1,DMAC1A_DEI0,0,0,0,IRDA_IRDAI } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0,TMU0_TUNI2,TMU0_TUNI1,TMU0_TUNI0,VEU2H1_VEU2HI,0,0,LCDC_LCDCI } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC_KEYI,DMAC0B_DADERR,DMAC0B_DEI5,DMAC0B_DEI4,0,SCIF_SCIF2,SCIF_SCIF1,SCIF_SCIF0 } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0,0,0,SCIFA_SCIFA1,ADC_ADI,0,MSIOF_MSIOFI1,MSIOF_MSIOFI0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C_DTEI, I2C_WAITI, I2C_TACKI, I2C_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLTENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { 0,SDHI0_SDHII2,SDHI0_SDHII1,SDHI0_SDHII0,0,0,SCIFA_SCIFA2,SIU_SIUI } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT_CMTI, 0, 0, USB_USI0,0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { 0, DMAC1B_DADERR,DMAC1B_DEI5,DMAC1B_DEI4,0,RTC_ATI,RTC_PRI,RTC_CUI } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { 0,_2DG_CEI,_2DG_INI,_2DG_TRI,0,TPU_TPUI,0,TSIF_TSIFI } },
+	{ 0xa40800b0, 0xa40800f0, 8, /* IMR12 / IMCR12 */
+	  { 0,0,0,0,0,0,0,ATAPI_ATAPII } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0_TUNI0, TMU0_TUNI1, TMU0_TUNI2, IRDA_IRDAI } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { VEU2H1_VEU2HI, LCDC_LCDCI, DMAC1A, 0} },
+	{ 0xa4080008, 0, 16, 4, /* IPRC */ { TMU1_TUNI0, TMU1_TUNI1, TMU1_TUNI2, 0} },
+	{ 0xa408000c, 0, 16, 4, /* IPRD */ { } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0A, VIO, SCIFA_SCIFA0, VPU_VPUI } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC_KEYI, DMAC0B, USB_USI0, CMT_CMTI } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF_SCIF0, SCIF_SCIF1, SCIF_SCIF2,0 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { MSIOF_MSIOFI0,MSIOF_MSIOFI1, FLCTL, I2C } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SCIFA_SCIFA1,0,TSIF_TSIFI,_2DG } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { ADC_ADI,0,SIU_SIUI,SDHI1 } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { RTC,DMAC1B,0,SDHI0 } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { SCIFA_SCIFA2,0,TPU_TPUI,ATAPI_ATAPII } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
+			 mask_registers, prio_registers, sense_registers);
+
+void __init plat_irq_setup(void)
+{
+	register_intc_controller(&intc_desc);
+}
+
+void __init plat_mem_setup(void)
+{
+	/* Register the URAM space as Node 1 */
+	setup_bootmem_node(1, 0x055f0000, 0x05610000);
+}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index 07c988dc9de6..ae2b22219f02 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -231,12 +231,6 @@ static struct intc_group groups[] __initdata = {
 	INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3),
 };
 
-static struct intc_prio priorities[] __initdata = {
-	INTC_PRIO(SCIF0, 3),
-	INTC_PRIO(SCIF1, 3),
-	INTC_PRIO(SCIF2, 3),
-};
-
 static struct intc_mask_reg mask_registers[] __initdata = {
 	{ 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */
 	  { 0, 0, 0, 0, 0, 0, GPIO, 0,
@@ -270,11 +264,10 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities,
+static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups,
 			 mask_registers, prio_registers, NULL);
 
 /* Support for external interrupt pins in IRQ mode */
-
 static struct intc_vect irq_vectors[] __initdata = {
 	INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280),
 	INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300),
@@ -302,7 +295,6 @@ static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
 			 irq_sense_registers);
 
 /* External interrupt pins in IRL mode */
-
 static struct intc_vect irl_vectors[] __initdata = {
 	INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220),
 	INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260),
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
index b9cec48b1808..b73578ee295d 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7770.c
@@ -1,7 +1,7 @@
 /*
  * SH7770 Setup
  *
- *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2006 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -29,6 +29,41 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 63, 63, 63, 63 },
 	}, {
+		.mapbase	= 0xff926000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 64, 64, 64, 64 },
+	}, {
+		.mapbase	= 0xff927000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 65, 65, 65, 65 },
+	}, {
+		.mapbase	= 0xff928000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 66, 66, 66, 66 },
+	}, {
+		.mapbase	= 0xff929000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 67, 67, 67, 67 },
+	}, {
+		.mapbase	= 0xff92a000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 68, 68, 68, 68 },
+	}, {
+		.mapbase	= 0xff92b000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 69, 69, 69, 69 },
+	}, {
+		.mapbase	= 0xff92c000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 70, 70, 70, 70 },
+	}, {
 		.flags = 0,
 	}
 };
diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c
index 30b76a94abf2..dd4f51ffb50e 100644
--- a/arch/sh/kernel/cpu/sh5/fpu.c
+++ b/arch/sh/kernel/cpu/sh5/fpu.c
@@ -17,6 +17,7 @@
 #include <asm/processor.h>
 #include <asm/user.h>
 #include <asm/io.h>
+#include <asm/fpu.h>
 
 /*
  * Initially load the FPU with signalling NANS.  This bit pattern
diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c
index 119c20afd4e5..b205b25eaf45 100644
--- a/arch/sh/kernel/cpu/sh5/unwind.c
+++ b/arch/sh/kernel/cpu/sh5/unwind.c
@@ -149,7 +149,7 @@ static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc,
 			if (dest >= 63) {
 				printk(KERN_NOTICE "%s: Invalid dest reg %d "
 				       "specified in movi handler. Failed "
-				       "opcode was 0x%lx: ", __FUNCTION__,
+				       "opcode was 0x%lx: ", __func__,
 				       dest, op);
 
 				continue;
diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c
index 4a8a4083ff0b..1db7ce0f25d4 100644
--- a/arch/sh/kernel/dump_task.c
+++ b/arch/sh/kernel/dump_task.c
@@ -1,5 +1,6 @@
 #include <linux/elfcore.h>
 #include <linux/sched.h>
+#include <asm/fpu.h>
 
 /*
  * Capture the user space registers if the task is not running (in user space)
diff --git a/arch/sh/kernel/io_trapped.c b/arch/sh/kernel/io_trapped.c
index 86a665d92201..39cd7f3aec7b 100644
--- a/arch/sh/kernel/io_trapped.c
+++ b/arch/sh/kernel/io_trapped.c
@@ -32,7 +32,7 @@ EXPORT_SYMBOL_GPL(trapped_mem);
 #endif
 static DEFINE_SPINLOCK(trapped_lock);
 
-int __init register_trapped_io(struct trapped_io *tiop)
+int register_trapped_io(struct trapped_io *tiop)
 {
 	struct resource *res;
 	unsigned long len = 0, flags = 0;
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 9ab1926b9d10..b98e37a1f54c 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -25,6 +25,7 @@
 #include <asm/pgalloc.h>
 #include <asm/system.h>
 #include <asm/ubc.h>
+#include <asm/fpu.h>
 
 static int hlt_counter;
 int ubc_usercnt = 0;
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 046999b1d1af..0283d8133075 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -28,6 +28,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/mmu_context.h>
+#include <asm/fpu.h>
 
 struct task_struct *last_task_used_math = NULL;
 
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index f6fbdfa6876d..d453c47dc522 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -33,6 +33,7 @@
 #include <asm/system.h>
 #include <asm/processor.h>
 #include <asm/mmu_context.h>
+#include <asm/fpu.h>
 
 /* This mask defines the bits of the SR which the user is not allowed to
    change, which are everything except S, Q, M, PR, SZ, FR. */
diff --git a/arch/sh/kernel/semaphore.c b/arch/sh/kernel/semaphore.c
deleted file mode 100644
index 184119eeae56..000000000000
--- a/arch/sh/kernel/semaphore.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Just taken from alpha implementation.
- * This can't work well, perhaps.
- */
-/*
- *  Generic semaphore code. Buyer beware. Do your own
- * specific changes in <asm/semaphore-helper.h>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-#include <asm/semaphore-helper.h>
-
-DEFINE_SPINLOCK(semaphore_wake_lock);
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-#define DOWN_VAR				\
-	struct task_struct *tsk = current;	\
-	wait_queue_t wait;			\
-	init_waitqueue_entry(&wait, tsk);
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	tsk->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		tsk->state = (task_state);	\
-	}					\
-	tsk->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DOWN_VAR
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int ret = 0;
-	DOWN_VAR
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, tsk);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index ff4f54a47c07..284f66f1ebbe 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -23,6 +23,8 @@
 #include <linux/kexec.h>
 #include <linux/module.h>
 #include <linux/smp.h>
+#include <linux/err.h>
+#include <linux/debugfs.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -333,6 +335,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7343]	= "SH7343",	[CPU_SH7785]	= "SH7785",
 	[CPU_SH7722]	= "SH7722",	[CPU_SHX3]	= "SH-X3",
 	[CPU_SH5_101]	= "SH5-101",	[CPU_SH5_103]	= "SH5-103",
+	[CPU_MXG]	= "MX-G",	[CPU_SH7723]	= "SH7723",
 	[CPU_SH7366]	= "SH7366",	[CPU_SH_NONE]	= "Unknown"
 };
 
@@ -443,3 +446,15 @@ const struct seq_operations cpuinfo_op = {
 	.show	= show_cpuinfo,
 };
 #endif /* CONFIG_PROC_FS */
+
+struct dentry *sh_debugfs_root;
+
+static int __init sh_debugfs_init(void)
+{
+	sh_debugfs_root = debugfs_create_dir("sh", NULL);
+	if (IS_ERR(sh_debugfs_root))
+		return PTR_ERR(sh_debugfs_root);
+
+	return 0;
+}
+arch_initcall(sh_debugfs_init);
diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index e1a6de9088b5..6d405462cee8 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -9,7 +9,6 @@
 #include <linux/pci.h>
 #include <linux/irq.h>
 #include <asm/sections.h>
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
@@ -48,12 +47,6 @@ EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(get_vm_area);
 #endif
 
-/* semaphore exports */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
 EXPORT_SYMBOL(__const_udelay);
@@ -111,9 +104,9 @@ DECLARE_EXPORT(__movmem_i4_even);
 DECLARE_EXPORT(__movmem_i4_odd);
 DECLARE_EXPORT(__movmemSI12_i4);
 
-#if (__GNUC_MINOR__ == 2 || defined(__GNUC_STM_RELEASE__))
+#if (__GNUC_MINOR__ >= 2 || defined(__GNUC_STM_RELEASE__))
 /*
- * GCC 4.2 emits these for division, as do GCC 4.1.x versions of the ST
+ * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
  * compiler which include backported patches.
  */
 DECLARE_EXPORT(__sdivsi3_i4i);
@@ -146,5 +139,7 @@ EXPORT_SYMBOL(csum_partial_copy_generic);
 EXPORT_SYMBOL(csum_ipv6_magic);
 #endif
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(_ebss);
+EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c
index 8004c38d3d37..a310c9707f03 100644
--- a/arch/sh/kernel/sh_ksyms_64.c
+++ b/arch/sh/kernel/sh_ksyms_64.c
@@ -16,7 +16,6 @@
 #include <linux/in6.h>
 #include <linux/interrupt.h>
 #include <linux/screen_info.h>
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
@@ -37,12 +36,11 @@ EXPORT_SYMBOL(csum_partial_copy_nocheck);
 EXPORT_SYMBOL(screen_info);
 #endif
 
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__up);
 EXPORT_SYMBOL(__put_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);
+EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f6b5fbfe75c4..f311551d9a05 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -29,6 +29,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/fpu.h>
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 80bde19d445b..552eb810cd85 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -26,6 +26,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>
+#include <asm/fpu.h>
 
 #define REG_RET 9
 #define REG_ARG1 2
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 94075e1a1e61..5d039d168f57 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -179,7 +179,7 @@ void smp_send_stop(void)
 }
 
 struct smp_fn_call_struct smp_fn_call = {
-	.lock		= SPIN_LOCK_UNLOCKED,
+	.lock		= __SPIN_LOCK_UNLOCKED(smp_fn_call.lock),
 	.finished	= ATOMIC_INIT(0),
 };
 
diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c
index 71312324b5de..d20c8c375881 100644
--- a/arch/sh/kernel/timers/timer-cmt.c
+++ b/arch/sh/kernel/timers/timer-cmt.c
@@ -77,7 +77,7 @@ static unsigned long cmt_timer_get_offset(void)
 				count -= LATCH;
 			} else {
 				printk("%s (): hardware timer problem?\n",
-				       __FUNCTION__);
+				       __func__);
 			}
 		}
 	} else
diff --git a/arch/sh/kernel/timers/timer-mtu2.c b/arch/sh/kernel/timers/timer-mtu2.c
index ade9d6eb29f9..fe453c01f9c9 100644
--- a/arch/sh/kernel/timers/timer-mtu2.c
+++ b/arch/sh/kernel/timers/timer-mtu2.c
@@ -76,7 +76,7 @@ static unsigned long mtu2_timer_get_offset(void)
 				count -= LATCH;
 			} else {
 				printk("%s (): hardware timer problem?\n",
-				       __FUNCTION__);
+				       __func__);
 			}
 		}
 	} else
diff --git a/arch/sh/kernel/topology.c b/arch/sh/kernel/topology.c
index 9b5844a1bdaa..0838942b7083 100644
--- a/arch/sh/kernel/topology.c
+++ b/arch/sh/kernel/topology.c
@@ -29,7 +29,7 @@ static int __init topology_init(void)
 		ret = register_cpu(&per_cpu(cpu_devices, i), i);
 		if (unlikely(ret))
 			printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
-			       __FUNCTION__, i, ret);
+			       __func__, i, ret);
 	}
 
 #if defined(CONFIG_NUMA) && !defined(CONFIG_SMP)
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index baa4fa368dce..e08b3bfeb656 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -25,6 +25,7 @@
 #include <linux/limits.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/fpu.h>
 
 #ifdef CONFIG_SH_KGDB
 #include <asm/kgdb.h>
diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c
index a55ac81d795b..a85831cbf18b 100644
--- a/arch/sh/kernel/traps_64.c
+++ b/arch/sh/kernel/traps_64.c
@@ -30,6 +30,7 @@
 #include <asm/atomic.h>
 #include <asm/processor.h>
 #include <asm/pgtable.h>
+#include <asm/fpu.h>
 
 #undef DEBUG_EXCEPTION
 #ifdef DEBUG_EXCEPTION
@@ -238,7 +239,7 @@ DO_ERROR(12, SIGILL,  "reserved instruction", reserved_inst, current)
 /* Called with interrupts disabled */
 asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs)
 {
-	show_excp_regs(__FUNCTION__, -1, -1, regs);
+	show_excp_regs(__func__, -1, -1, regs);
 	die_if_kernel("exception", regs, ex);
 }
 
diff --git a/arch/sh/lib/clear_page.S b/arch/sh/lib/clear_page.S
index 3539123fe517..8342bfbde64c 100644
--- a/arch/sh/lib/clear_page.S
+++ b/arch/sh/lib/clear_page.S
@@ -27,11 +27,11 @@ ENTRY(clear_page)
 	mov	#0,r0
 	!
 1:
-#if defined(CONFIG_CPU_SH3)
-	mov.l	r0,@r4
-#elif defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
 	movca.l	r0,@r4
 	mov	r4,r1
+#else
+	mov.l	r0,@r4
 #endif
 	add	#32,r4
 	mov.l	r0,@-r4
diff --git a/arch/sh/lib/copy_page.S b/arch/sh/lib/copy_page.S
index e002b91c8752..5d12e657be34 100644
--- a/arch/sh/lib/copy_page.S
+++ b/arch/sh/lib/copy_page.S
@@ -41,11 +41,11 @@ ENTRY(copy_page)
 	mov.l	@r11+,r5
 	mov.l	@r11+,r6
 	mov.l	@r11+,r7
-#if defined(CONFIG_CPU_SH3)
-	mov.l	r0,@r10
-#elif defined(CONFIG_CPU_SH4)
+#if defined(CONFIG_CPU_SH4)
 	movca.l	r0,@r10
 	mov	r10,r0
+#else
+	mov.l	r0,@r10
 #endif
 	add	#32,r10
 	mov.l	r7,@-r10
diff --git a/arch/sh/lib64/c-checksum.c b/arch/sh/lib64/c-checksum.c
index 5dfbd8b5e558..5c284e0cff9c 100644
--- a/arch/sh/lib64/c-checksum.c
+++ b/arch/sh/lib64/c-checksum.c
@@ -207,7 +207,7 @@ __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
 	result = (result & 0xffffffff) + (result >> 32);
 
 	pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n",
-		__FUNCTION__, saddr, daddr, len, proto, sum, result);
+		__func__, saddr, daddr, len, proto, sum, result);
 
 	return (__wsum)result;
 }
diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c
index 23c7d17fb9f7..d76bd801194f 100644
--- a/arch/sh/lib64/udelay.c
+++ b/arch/sh/lib64/udelay.c
@@ -21,7 +21,7 @@
  * a 1GHz box, that's about 2 seconds.
  */
 
-void __delay(int loops)
+void __delay(unsigned long loops)
 {
 	long long dummy;
 	__asm__ __volatile__("gettr	tr0, %1\n\t"
@@ -33,24 +33,17 @@ void __delay(int loops)
 			     :"0"(loops));
 }
 
-void __udelay(unsigned long long usecs, unsigned long lpj)
+inline void __const_udelay(unsigned long xloops)
 {
-	usecs *= (((unsigned long long) HZ << 32) / 1000000) * lpj;
-	__delay((long long) usecs >> 32);
+	__delay(xloops * (HZ * cpu_data[raw_smp_processor_id()].loops_per_jiffy));
 }
 
-void __ndelay(unsigned long long nsecs, unsigned long lpj)
+void __udelay(unsigned long usecs)
 {
-	nsecs *= (((unsigned long long) HZ << 32) / 1000000000) * lpj;
-	__delay((long long) nsecs >> 32);
+	__const_udelay(usecs * 0x000010c6);  /* 2**32 / 1000000 */
 }
 
-void udelay(unsigned long usecs)
+void __ndelay(unsigned long nsecs)
 {
-	__udelay(usecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy);
-}
-
-void ndelay(unsigned long nsecs)
-{
-	__ndelay(nsecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy);
+	__const_udelay(nsecs * 0x00000005);
 }
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index f549b8cd2501..5fd218430b19 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -59,7 +59,7 @@ config 32BIT
 
 config PMB
 	bool "Support 32-bit physical addressing through PMB"
-	depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
+	depends on MMU && EXPERIMENTAL && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785)
 	select 32BIT
 	default y
 	help
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index db6d950b6f5e..c5b56d52b7d2 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -127,13 +127,13 @@ static int __init cache_debugfs_init(void)
 {
 	struct dentry *dcache_dentry, *icache_dentry;
 
-	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, NULL,
+	dcache_dentry = debugfs_create_file("dcache", S_IRUSR, sh_debugfs_root,
 					    (unsigned int *)CACHE_TYPE_DCACHE,
 					    &cache_debugfs_fops);
 	if (IS_ERR(dcache_dentry))
 		return PTR_ERR(dcache_dentry);
 
-	icache_dentry = debugfs_create_file("icache", S_IRUSR, NULL,
+	icache_dentry = debugfs_create_file("icache", S_IRUSR, sh_debugfs_root,
 					    (unsigned int *)CACHE_TYPE_ICACHE,
 					    &cache_debugfs_fops);
 	if (IS_ERR(icache_dentry)) {
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index e2ed6dd252b9..53dde0607362 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -328,7 +328,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	/* We only have ZONE_NORMAL, so this is easy.. */
 	ret = __add_pages(pgdat->node_zones + ZONE_NORMAL, start_pfn, nr_pages);
 	if (unlikely(ret))
-		printk("%s: Failed, __add_pages() == %d\n", __FUNCTION__, ret);
+		printk("%s: Failed, __add_pages() == %d\n", __func__, ret);
 
 	return ret;
 }
diff --git a/arch/sh/mm/ioremap_32.c b/arch/sh/mm/ioremap_32.c
index 0c7b7e33abdc..882a32ebc6b7 100644
--- a/arch/sh/mm/ioremap_32.c
+++ b/arch/sh/mm/ioremap_32.c
@@ -141,7 +141,7 @@ void __iounmap(void __iomem *addr)
 
 	p = remove_vm_area((void *)(vaddr & PAGE_MASK));
 	if (!p) {
-		printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr);
+		printk(KERN_ERR "%s: bad address %p\n", __func__, addr);
 		return;
 	}
 
diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c
index e27d16519235..cea224c3e49b 100644
--- a/arch/sh/mm/ioremap_64.c
+++ b/arch/sh/mm/ioremap_64.c
@@ -178,7 +178,7 @@ static unsigned long shmedia_alloc_io(unsigned long phys, unsigned long size,
         } else {
                 if (!printed_full) {
                         printk("%s: done with statics, switching to kmalloc\n",
-			       __FUNCTION__);
+			       __func__);
                         printed_full = 1;
                 }
                 tlen = strlen(name);
@@ -352,7 +352,7 @@ void onchip_unmap(unsigned long vaddr)
 	res = shmedia_find_resource(&shmedia_iomap, vaddr);
 	if (!res) {
 		printk(KERN_ERR "%s: Failed to free 0x%08lx\n",
-		       __FUNCTION__, vaddr);
+		       __func__, vaddr);
 		return;
 	}
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index a4b015f95a3a..7f885b7f8aff 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -14,6 +14,7 @@
 #include <linux/mman.h>
 #include <linux/mm.h>
 #include <linux/threads.h>
+#include <linux/fs.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index ab81c602295f..0b0ec6e04753 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -393,7 +393,7 @@ static int __init pmb_debugfs_init(void)
 	struct dentry *dentry;
 
 	dentry = debugfs_create_file("pmb", S_IFREG | S_IRUGO,
-				     NULL, NULL, &pmb_debugfs_fops);
+				     sh_debugfs_root, NULL, &pmb_debugfs_fops);
 	if (IS_ERR(dentry))
 		return PTR_ERR(dentry);
 
diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c
index 2a98c9ec88ff..7876997ba19a 100644
--- a/arch/sh/mm/tlbflush_64.c
+++ b/arch/sh/mm/tlbflush_64.c
@@ -131,7 +131,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 #ifdef DEBUG_FAULT
 		print_task(tsk);
 		printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
-		       __FUNCTION__,__LINE__,
+		       __func__, __LINE__,
 		       address,regs->pc,textaccess,writeaccess);
 		show_regs(regs);
 #endif
@@ -145,7 +145,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 #ifdef DEBUG_FAULT
 		print_task(tsk);
 		printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
-		       __FUNCTION__,__LINE__,
+		       __func__, __LINE__,
 		       address,regs->pc,textaccess,writeaccess);
 		show_regs(regs);
 
@@ -157,7 +157,7 @@ asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess,
 #ifdef DEBUG_FAULT
 		print_task(tsk);
 		printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n",
-		       __FUNCTION__,__LINE__,
+		       __func__, __LINE__,
 		       address,regs->pc,textaccess,writeaccess);
 		show_regs(regs);
 #endif
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 67997af25c0c..987c6682bf99 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -21,8 +21,9 @@ HD64465			HD64465
 7206SE			SH_7206_SOLUTION_ENGINE
 7343SE			SH_7343_SOLUTION_ENGINE
 7619SE			SH_7619_SOLUTION_ENGINE
-7722SE			SH_7722_SOLUTION_ENGINE		
-7751SE			SH_7751_SOLUTION_ENGINE		
+7721SE			SH_7721_SOLUTION_ENGINE
+7722SE			SH_7722_SOLUTION_ENGINE
+7751SE			SH_7751_SOLUTION_ENGINE
 7780SE			SH_7780_SOLUTION_ENGINE
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX
@@ -38,7 +39,6 @@ R7780MP			SH_R7780MP
 R7785RP			SH_R7785RP
 TITAN			SH_TITAN
 SHMIN			SH_SHMIN
-7710VOIPGW		SH_7710VOIPGW
 LBOXRE2			SH_LBOX_RE2
 X3PROTO			SH_X3PROTO
 MAGICPANELR2		SH_MAGIC_PANEL_R2
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index c40343c54920..49590f8fe98c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -27,9 +27,6 @@ config ARCH_NO_VIRT_TO_BUS
 config OF
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config HZ
 	int
 	default 100
@@ -257,15 +254,6 @@ config SPARC_LED
 
 source "fs/Kconfig.binfmt"
 
-config SUNOS_EMUL
-	bool "SunOS binary emulation"
-	help
-	  This allows you to run most SunOS binaries.  If you want to do this,
-	  say Y here and place appropriate files in /usr/gnemul/sunos. See
-	  <http://www.ultralinux.org/faq.html> for more information.  If you
-	  want to run SunOS binaries on an Ultra you must also say Y to
-	  "Kernel support for 32-bit a.out binaries" above.
-
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/sparc/defconfig b/arch/sparc/defconfig
index f7a509149199..6a2c57a2fe71 100644
--- a/arch/sparc/defconfig
+++ b/arch/sparc/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Wed Jul 25 15:30:21 2007
+# Linux kernel version: 2.6.25
+# Sun Apr 20 01:49:51 2008
 #
 CONFIG_MMU=y
 CONFIG_HIGHMEM=y
@@ -9,18 +9,15 @@ CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
+CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -29,12 +26,23 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -49,6 +57,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -61,6 +70,13 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -88,6 +104,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # General machine setup
@@ -113,14 +130,13 @@ CONFIG_SUN_PM=y
 CONFIG_PCI=y
 CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_NO_DMA is not set
 CONFIG_SUN_OPENPROMFS=m
 # CONFIG_SPARC_LED is not set
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
 CONFIG_BINFMT_MISC=m
-CONFIG_SUNOS_EMUL=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -128,6 +144,7 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
@@ -148,6 +165,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -170,6 +188,7 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -191,8 +210,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -214,10 +235,6 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -225,6 +242,7 @@ CONFIG_SCTP_HMAC_MD5=y
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 CONFIG_AF_RXRPC=m
@@ -248,6 +266,7 @@ CONFIG_AF_RXRPC=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -271,7 +290,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
@@ -279,6 +298,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -318,6 +339,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
@@ -338,6 +360,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -353,14 +376,7 @@ CONFIG_SCSI_SUNESP=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -375,6 +391,7 @@ CONFIG_DUMMY=m
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -388,11 +405,20 @@ CONFIG_SUNQE=m
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_MYRI_SBUS is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -409,11 +435,15 @@ CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
 # CONFIG_TR is not set
 
 #
@@ -421,13 +451,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -449,7 +479,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 CONFIG_INPUT_JOYDEV=m
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
 
@@ -498,6 +527,7 @@ CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -519,7 +549,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 CONFIG_JS_RTC=m
 # CONFIG_R3964 is not set
@@ -538,9 +567,9 @@ CONFIG_DEVPORT=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
@@ -553,6 +582,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -569,15 +606,15 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
@@ -592,6 +629,7 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -601,34 +639,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
 # Userspace I/O
 #
 # CONFIG_UIO is not set
@@ -664,18 +682,14 @@ CONFIG_FS_MBCACHE=y
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
 CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=m
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 CONFIG_AUTOFS4_FS=m
 # CONFIG_FUSE_FS is not set
@@ -704,7 +718,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -721,14 +734,13 @@ CONFIG_BEFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=m
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
@@ -760,10 +772,6 @@ CONFIG_AFS_FS=m
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
 CONFIG_SUN_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -804,21 +812,14 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -842,9 +843,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 
 #
@@ -853,9 +857,12 @@ CONFIG_FORCED_INLINING=y
 CONFIG_KEYS=y
 # CONFIG_KEYS_DEBUG_PROC_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
@@ -873,6 +880,10 @@ CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
@@ -887,11 +898,15 @@ CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile
index e795f282dece..59700aaaae93 100644
--- a/arch/sparc/kernel/Makefile
+++ b/arch/sparc/kernel/Makefile
@@ -1,4 +1,4 @@
-# $Id: Makefile,v 1.62 2000/12/15 00:41:17 davem Exp $
+#
 # Makefile for the linux kernel.
 #
 
@@ -9,10 +9,11 @@ EXTRA_AFLAGS	:= -ansi
 IRQ_OBJS := irq.o sun4m_irq.o sun4c_irq.o sun4d_irq.o
 obj-y    := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \
 	    process.o signal.o ioport.o setup.o idprom.o \
-	    sys_sparc.o sunos_asm.o systbls.o \
-	    time.o windows.o cpu.o devices.o sclow.o \
-	    tadpole.o tick14.o ptrace.o sys_solaris.o \
-	    unaligned.o muldiv.o semaphore.o prom.o of_device.o devres.o
+	    sys_sparc.o systbls.o \
+	    time.o windows.o cpu.o devices.o \
+	    tadpole.o tick14.o ptrace.o \
+	    unaligned.o una_asm.o muldiv.o \
+	    prom.o of_device.o devres.o
 
 devres-y = ../../../kernel/irq/devres.o
 
@@ -24,7 +25,3 @@ obj-$(CONFIG_PCI) += ebus.o
 obj-$(CONFIG_SUN_PM) += apc.o pmc.o
 obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o
 obj-$(CONFIG_SPARC_LED) += led.o
-
-ifdef CONFIG_SUNOS_EMUL
-obj-y += sys_sunos.o sunos_ioctl.o
-endif
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 259a559d4cea..e7a0edfc1a32 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -32,7 +32,7 @@ struct cpu_fp_info {
 /* In order to get the fpu type correct, you need to take the IDPROM's
  * machine type value into consideration too.  I will fix this.
  */
-struct cpu_fp_info linux_sparc_fpu[] = {
+static struct cpu_fp_info linux_sparc_fpu[] = {
   { 0, 0, "Fujitsu MB86910 or Weitek WTL1164/5"},
   { 0, 1, "Fujitsu MB86911 or Weitek WTL1164/5 or LSI L64831"},
   { 0, 2, "LSI Logic L64802 or Texas Instruments ACT8847"},
@@ -76,7 +76,7 @@ struct cpu_fp_info linux_sparc_fpu[] = {
 
 #define NSPARCFPU  ARRAY_SIZE(linux_sparc_fpu)
 
-struct cpu_iu_info linux_sparc_chips[] = {
+static struct cpu_iu_info linux_sparc_chips[] = {
   /* Sun4/100, 4/200, SLC */
   { 0, 0, "Fujitsu  MB86900/1A or LSI L64831 SparcKIT-40"},
   /* borned STP1012PGA */
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index d850785b2080..96344ff2bbe1 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -101,7 +101,7 @@ void __init fill_ebus_child(struct device_node *dp,
 			prom_printf("UGH: property for %s was %d, need < %d\n",
 				    dev->prom_node->name, len,
 				    dev->parent->num_addrs);
-			panic(__FUNCTION__);
+			panic(__func__);
 		}
 
 		/* XXX resource */
@@ -162,7 +162,7 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d
 		prom_printf("UGH: proplen for %s was %d, need multiple of %d\n",
 			    dev->prom_node->name, len,
 			    (int)sizeof(struct linux_prom_registers));
-		panic(__FUNCTION__);
+		panic(__func__);
 	}
 	dev->num_addrs = len / sizeof(struct linux_prom_registers);
 
@@ -324,7 +324,7 @@ void __init ebus_init(void)
 		regs = of_get_property(dp, "reg", &len);
 		if (!regs) {
 			prom_printf("%s: can't find reg property\n",
-				    __FUNCTION__);
+				    __func__);
 			prom_halt();
 		}
 		nreg = len / sizeof(struct linux_prom_pci_registers);
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index c2eed8f71516..135644f8add7 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1186,36 +1186,6 @@ srmmu_fault:
 
 	RESTORE_ALL
 
-#ifdef CONFIG_SUNOS_EMUL
-	/* SunOS uses syscall zero as the 'indirect syscall' it looks
-	 * like indir_syscall(scall_num, arg0, arg1, arg2...);  etc.
-	 * This is complete brain damage.
-	 */
-	.globl	sunos_indir
-sunos_indir:
-	mov	%o7, %l4
-	cmp	%o0, NR_SYSCALLS
-	blu,a	1f
-	 sll	%o0, 0x2, %o0
-
-	sethi	%hi(sunos_nosys), %l6
-	b	2f
-	 or	%l6, %lo(sunos_nosys), %l6
-
-1:
-	set	sunos_sys_table, %l7
-	ld	[%l7 + %o0], %l6
-
-2:	
-	mov	%o1, %o0
-	mov	%o2, %o1
-	mov	%o3, %o2
-	mov	%o4, %o3
-	mov	%o5, %o4
-	call	%l6
-	 mov	%l4, %o7
-#endif
-
 	.align	4
 	.globl	sys_nis_syscall
 sys_nis_syscall:
@@ -1232,6 +1202,16 @@ sys_execve:
 	call	sparc_execve
 	 mov	%l5, %o7
 
+	.globl	sunos_execv
+sunos_execv:
+	st	%g0, [%sp + STACKFRAME_SZ + PT_I2]
+
+	call	sparc_execve
+	 add	%sp, STACKFRAME_SZ, %o0
+
+	b	ret_sys_call
+	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
+
 	.align	4
 	.globl	sys_pipe
 sys_pipe:
@@ -1394,7 +1374,7 @@ ret_from_fork:
 	b	ret_sys_call
 	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
 
-	/* Linux native and SunOS system calls enter here... */
+	/* Linux native system calls enter here... */
 	.align	4
 	.globl	linux_sparc_syscall
 linux_sparc_syscall:
@@ -1472,170 +1452,6 @@ linux_syscall_trace2:
 	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 
-	/*
-	 * Solaris system calls and indirect system calls enter here.
-         *
-	 * I have named the solaris indirect syscalls like that because
-	 * it seems like Solaris has some fast path syscalls that can
-	 * be handled as indirect system calls. - mig
-	 */
-
-linux_syscall_for_solaris:
-	sethi	%hi(sys_call_table), %l7
-	b	linux_sparc_syscall
-	 or	%l7, %lo(sys_call_table), %l7
-	
-	.align	4
-	.globl	solaris_syscall
-solaris_syscall:
-	cmp	%g1,59
-	be	linux_syscall_for_solaris
-	 cmp	%g1,2
-	be	linux_syscall_for_solaris
-	 cmp    %g1,42
-	be      linux_syscall_for_solaris
-	 cmp	%g1,119
-	be,a	linux_syscall_for_solaris
-	 mov	2, %g1
-1:	
-	SAVE_ALL_HEAD
-	 rd	%wim, %l3
-
-	wr	%l0, PSR_ET, %psr
-	nop
-	nop
-	mov	%i0, %l5
-
-	call	do_solaris_syscall
-	 add	%sp, STACKFRAME_SZ, %o0
-
-	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-	set	PSR_C, %g2
-	cmp	%o0, -ERESTART_RESTARTBLOCK
-	bgeu	1f
-	 ld	[%sp + STACKFRAME_SZ + PT_PSR], %g3
-
-	/* System call success, clear Carry condition code. */		
-	andn	%g3, %g2, %g3
-	clr	%l6
-	b	2f
-	 st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]	
-
-1:
-	/* System call failure, set Carry condition code.
-	 * Also, get abs(errno) to return to the process.
-	 */
-	sub	%g0, %o0, %o0
-	mov	1, %l6
-	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-	or	%g3, %g2, %g3
-	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
-
-	/* Advance the pc and npc over the trap instruction.
-	 * If the npc is unaligned (has a 1 in the lower byte), it means
-	 * the kernel does not want us to play magic (ie, skipping over
-	 * traps).  Mainly when the Solaris code wants to set some PC and
-	 * nPC (setcontext).
-	 */
-2:
-	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1	/* pc  = npc   */
-	andcc	%l1, 1, %g0
-	bne	1f
-	 add	%l1, 0x4, %l2			/* npc = npc+4 */
-	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
-	b	ret_trap_entry
-	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
-
-	/* kernel knows what it is doing, fixup npc and continue */
-1:
-	sub	%l1, 1, %l1
- 	b	ret_trap_entry	
-	 st	%l1, [%sp + STACKFRAME_SZ + PT_NPC]
-
-#ifndef CONFIG_SUNOS_EMUL
-	.align	4
-	.globl	sunos_syscall
-sunos_syscall:
-	SAVE_ALL_HEAD
-	 rd	%wim, %l3
-	wr	%l0, PSR_ET, %psr
-	nop
-	nop
-	mov	%i0, %l5
-	call	do_sunos_syscall
-	 add	%sp, STACKFRAME_SZ, %o0
-#endif
-
-	/* {net, open}bsd system calls enter here... */
-	.align	4
-	.globl	bsd_syscall
-bsd_syscall:
-	/* Direct access to user regs, must faster. */
-	cmp	%g1, NR_SYSCALLS
-	blu,a	1f
-	 sll	%g1, 2, %l4
-
-	set	sys_ni_syscall, %l7
-	b	bsd_is_too_hard
-	 nop
-
-1:
-	ld	[%l7 + %l4], %l7
-
-	.globl	bsd_is_too_hard
-bsd_is_too_hard:
-	rd	%wim, %l3
-	SAVE_ALL
-
-	wr	%l0, PSR_ET, %psr
-	WRITE_PAUSE
-
-2:
-	mov	%i0, %o0
-	mov	%i1, %o1
-	mov	%i2, %o2
-	mov	%i0, %l5
-	mov	%i3, %o3
-	mov	%i4, %o4
-	call	%l7
-	 mov	%i5, %o5
-
-	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-	set	PSR_C, %g2
-	cmp	%o0, -ERESTART_RESTARTBLOCK
-	bgeu	1f
-	 ld	[%sp + STACKFRAME_SZ + PT_PSR], %g3
-
-	/* System call success, clear Carry condition code. */		
-	andn	%g3, %g2, %g3
-	clr	%l6
-	b	2f
-	 st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]	
-
-1:
-	/* System call failure, set Carry condition code.
-	 * Also, get abs(errno) to return to the process.
-	 */
-	sub	%g0, %o0, %o0
-#if 0 /* XXX todo XXX */
-	sethi	%hi(bsd_xlatb_rorl), %o3
-	or	%o3, %lo(bsd_xlatb_rorl), %o3
-	sll	%o0, 2, %o0
-	ld	[%o3 + %o0], %o0
-#endif
-	mov	1, %l6
-	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-	or	%g3, %g2, %g3
-	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
-
-	/* Advance the pc and npc over the trap instruction. */
-2:
-	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1	/* pc  = npc   */
-	add	%l1, 0x4, %l2			/* npc = npc+4 */
-	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
-	b	ret_trap_entry
-	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
-
 /* Saving and restoring the FPU state is best done from lowlevel code.
  *
  * void fpsave(unsigned long *fpregs, unsigned long *fsr,
diff --git a/arch/sparc/kernel/errtbls.c b/arch/sparc/kernel/errtbls.c
deleted file mode 100644
index ed14df7116e9..000000000000
--- a/arch/sparc/kernel/errtbls.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/* errtbls.c: Error number conversion tables.
- *
- * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
- *
- * Based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#include <asm/solerrno.h>        /* Solaris errnos */
-
-/* Here is the table which converts between Linux error number values
- * to the equivalent under Solaris.  Note that since the Linux ones
- * have been set up to match exactly those of SunOS, no translation
- * table is needed for that OS.
- */
-
-int solaris_errno[] = {
-	0,
-	SOL_EPERM,
-	SOL_ENOENT,
-	SOL_ESRCH,
-	SOL_EINTR,
-	SOL_EIO,
-	SOL_ENXIO,
-	SOL_E2BIG,
-	SOL_ENOEXEC,
-	SOL_EBADF,
-	SOL_ECHILD,
-	SOL_EAGAIN,
-	SOL_ENOMEM,
-	SOL_EACCES,
-	SOL_EFAULT,
-	SOL_NOTBLK,
-	SOL_EBUSY,
-	SOL_EEXIST,
-	SOL_EXDEV,
-	SOL_ENODEV,
-	SOL_ENOTDIR,
-	SOL_EISDIR,
-	SOL_EINVAL,
-	SOL_ENFILE,
-	SOL_EMFILE,
-	SOL_ENOTTY,
-	SOL_ETXTBSY,
-	SOL_EFBIG,
-	SOL_ENOSPC,
-	SOL_ESPIPE,
-	SOL_EROFS,
-	SOL_EMLINK,
-	SOL_EPIPE,
-	SOL_EDOM,
-	SOL_ERANGE,
-	SOL_EWOULDBLOCK,
-	SOL_EINPROGRESS,
-	SOL_EALREADY,
-	SOL_ENOTSOCK,
-	SOL_EDESTADDRREQ,
-	SOL_EMSGSIZE,
-	SOL_EPROTOTYPE,
-	SOL_ENOPROTOOPT,
-	SOL_EPROTONOSUPPORT,
-	SOL_ESOCKTNOSUPPORT,
-	SOL_EOPNOTSUPP,
-	SOL_EPFNOSUPPORT,
-	SOL_EAFNOSUPPORT,
-	SOL_EADDRINUSE,
-	SOL_EADDRNOTAVAIL,
-	SOL_ENETDOWN,
-	SOL_ENETUNREACH,
-	SOL_ENETRESET,
-	SOL_ECONNABORTED,
-	SOL_ECONNRESET,
-	SOL_ENOBUFS,
-	SOL_EISCONN,
-	SOL_ENOTONN,
-	SOL_ESHUTDOWN,
-	SOL_ETOOMANYREFS,
-	SOL_ETIMEDOUT,
-	SOL_ECONNREFUSED,
-	SOL_ELOOP,
-	SOL_ENAMETOOLONG,
-	SOL_EHOSTDOWN,
-	SOL_EHOSTUNREACH,
-	SOL_ENOTEMPTY,
-	SOL_EPROCLIM,
-	SOL_EUSERS,
-	SOL_EDQUOT,
-	SOL_ESTALE,
-	SOL_EREMOTE,
-	SOL_ENOSTR,
-	SOL_ETIME,
-	SOL_ENOSR,
-	SOL_ENOMSG,
-	SOL_EBADMSG,
-	SOL_IDRM,
-	SOL_EDEADLK,
-	SOL_ENOLCK,
-	SOL_ENONET,
-	SOL_ERREMOTE,
-	SOL_ENOLINK,
-	SOL_EADV,
-	SOL_ESRMNT,
-	SOL_ECOMM,
-	SOL_EPROTO,
-	SOL_EMULTIHOP,
-	SOL_EINVAL,    /* EDOTDOT XXX??? */
-	SOL_REMCHG,
-	SOL_NOSYS,
-	SOL_STRPIPE,
-	SOL_EOVERFLOW,
-	SOL_EBADFD,
-	SOL_ECHRNG,
-	SOL_EL2NSYNC,
-	SOL_EL3HLT,
-	SOL_EL3RST,
-	SOL_NRNG,
-	SOL_EUNATCH,
-	SOL_ENOCSI,
-	SOL_EL2HLT,
-	SOL_EBADE,
-	SOL_EBADR,
-	SOL_EXFULL,
-	SOL_ENOANO,
-	SOL_EBADRQC,
-	SOL_EBADSLT,
-	SOL_EDEADLOCK,
-	SOL_EBFONT,
-	SOL_ELIBEXEC,
-	SOL_ENODATA,
-	SOL_ELIBBAD,
-	SOL_ENOPKG,
-	SOL_ELIBACC,
-	SOL_ENOTUNIQ,
-	SOL_ERESTART,
-	SOL_EUCLEAN,
-	SOL_ENOTNAM,
-	SOL_ENAVAIL,
-	SOL_EISNAM,
-	SOL_EREMOTEIO,
-	SOL_EILSEQ,
-	SOL_ELIBMAX,
-	SOL_ELIBSCN,
-};
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 9a219e8b5ddb..b7f1e81c8ff2 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -78,11 +78,6 @@ sun4e_notsup:
         .asciz  "Sparc-Linux sun4e support does not exist\n\n"
 	.align 4
 
-#ifndef CONFIG_SUNOS_EMUL
-#undef SUNOS_SYSCALL_TRAP
-#define SUNOS_SYSCALL_TRAP SUNOS_NO_SYSCALL_TRAP
-#endif
-
 	/* The Sparc trap table, bootloader gives us control at _start. */
 	.text
 	.globl	start, _stext, _start, __stext
@@ -158,7 +153,7 @@ t_bad6f:BAD_TRAP(0x6f) BAD_TRAP(0x70) BAD_TRAP(0x71) BAD_TRAP(0x72) BAD_TRAP(0x7
 t_bad74:BAD_TRAP(0x74) BAD_TRAP(0x75) BAD_TRAP(0x76) BAD_TRAP(0x77) BAD_TRAP(0x78)
 t_bad79:BAD_TRAP(0x79) BAD_TRAP(0x7a) BAD_TRAP(0x7b) BAD_TRAP(0x7c) BAD_TRAP(0x7d)
 t_bad7e:BAD_TRAP(0x7e) BAD_TRAP(0x7f)
-t_sunos:SUNOS_SYSCALL_TRAP                  /* SunOS System Call             */
+t_bad80:BAD_TRAP(0x80)                      /* SunOS System Call             */
 t_sbkpt:BREAKPOINT_TRAP                     /* Software Breakpoint/KGDB      */
 t_divz:	TRAP_ENTRY(0x82, do_hw_divzero)     /* Divide by zero trap           */
 t_flwin:TRAP_ENTRY(0x83, do_flush_windows)  /* Flush Windows Trap            */
@@ -166,8 +161,8 @@ t_clwin:BAD_TRAP(0x84)                      /* Clean Windows Trap            */
 t_rchk:	BAD_TRAP(0x85)                      /* Range Check                   */
 t_funal:BAD_TRAP(0x86)                      /* Fix Unaligned Access Trap     */
 t_iovf:	BAD_TRAP(0x87)                      /* Integer Overflow Trap         */
-t_slowl:SOLARIS_SYSCALL_TRAP                /* Slowaris System Call          */
-t_netbs:NETBSD_SYSCALL_TRAP                 /* Net-B.S. System Call          */
+t_bad88:BAD_TRAP(0x88)                      /* Slowaris System Call          */
+t_bad89:BAD_TRAP(0x89)                      /* Net-B.S. System Call          */
 t_bad8a:BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c) BAD_TRAP(0x8d) BAD_TRAP(0x8e)
 t_bad8f:BAD_TRAP(0x8f)
 t_linux:LINUX_SYSCALL_TRAP                  /* Linux System Call             */
@@ -178,7 +173,7 @@ t_getcc:GETCC_TRAP                          /* Get Condition Codes           */
 t_setcc:SETCC_TRAP                          /* Set Condition Codes           */
 t_getpsr:GETPSR_TRAP                        /* Get PSR Register              */
 t_bada3:BAD_TRAP(0xa3) BAD_TRAP(0xa4) BAD_TRAP(0xa5) BAD_TRAP(0xa6)
-t_slowi:INDIRECT_SOLARIS_SYSCALL(156)
+t_bada7:BAD_TRAP(0xa7)
 t_bada8:BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
 t_badac:BAD_TRAP(0xac) BAD_TRAP(0xad) BAD_TRAP(0xae) BAD_TRAP(0xaf) BAD_TRAP(0xb0)
 t_badb1:BAD_TRAP(0xb1) BAD_TRAP(0xb2) BAD_TRAP(0xb3) BAD_TRAP(0xb4) BAD_TRAP(0xb5)
@@ -243,19 +238,19 @@ trapbase_cpu1:
 	BAD_TRAP(0x74) BAD_TRAP(0x75) BAD_TRAP(0x76) BAD_TRAP(0x77) BAD_TRAP(0x78)
 	BAD_TRAP(0x79) BAD_TRAP(0x7a) BAD_TRAP(0x7b) BAD_TRAP(0x7c) BAD_TRAP(0x7d)
 	BAD_TRAP(0x7e) BAD_TRAP(0x7f)
-	SUNOS_SYSCALL_TRAP 
+	BAD_TRAP(0x80)
 	BREAKPOINT_TRAP
 	TRAP_ENTRY(0x82, do_hw_divzero)
 	TRAP_ENTRY(0x83, do_flush_windows) BAD_TRAP(0x84) BAD_TRAP(0x85)
-	BAD_TRAP(0x86) BAD_TRAP(0x87) SOLARIS_SYSCALL_TRAP
-	NETBSD_SYSCALL_TRAP BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c)
+	BAD_TRAP(0x86) BAD_TRAP(0x87) BAD_TRAP(0x88)
+	BAD_TRAP(0x89) BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c)
 	BAD_TRAP(0x8d) BAD_TRAP(0x8e) BAD_TRAP(0x8f)
 	LINUX_SYSCALL_TRAP BAD_TRAP(0x91) BAD_TRAP(0x92) BAD_TRAP(0x93) BAD_TRAP(0x94)
 	BAD_TRAP(0x95) BAD_TRAP(0x96) BAD_TRAP(0x97) BAD_TRAP(0x98) BAD_TRAP(0x99)
 	BAD_TRAP(0x9a) BAD_TRAP(0x9b) BAD_TRAP(0x9c) BAD_TRAP(0x9d) BAD_TRAP(0x9e)
 	BAD_TRAP(0x9f) GETCC_TRAP SETCC_TRAP GETPSR_TRAP
 	BAD_TRAP(0xa3) BAD_TRAP(0xa4) BAD_TRAP(0xa5) BAD_TRAP(0xa6)
-	INDIRECT_SOLARIS_SYSCALL(156) BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
+	BAD_TRAP(0xa7) BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
 	BAD_TRAP(0xac) BAD_TRAP(0xad) BAD_TRAP(0xae) BAD_TRAP(0xaf) BAD_TRAP(0xb0)
 	BAD_TRAP(0xb1) BAD_TRAP(0xb2) BAD_TRAP(0xb3) BAD_TRAP(0xb4) BAD_TRAP(0xb5)
 	BAD_TRAP(0xb6) BAD_TRAP(0xb7) BAD_TRAP(0xb8) BAD_TRAP(0xb9) BAD_TRAP(0xba)
@@ -311,19 +306,19 @@ trapbase_cpu2:
 	BAD_TRAP(0x74) BAD_TRAP(0x75) BAD_TRAP(0x76) BAD_TRAP(0x77) BAD_TRAP(0x78)
 	BAD_TRAP(0x79) BAD_TRAP(0x7a) BAD_TRAP(0x7b) BAD_TRAP(0x7c) BAD_TRAP(0x7d)
 	BAD_TRAP(0x7e) BAD_TRAP(0x7f)
-	SUNOS_SYSCALL_TRAP 
+	BAD_TRAP(0x80)
 	BREAKPOINT_TRAP
 	TRAP_ENTRY(0x82, do_hw_divzero)
 	TRAP_ENTRY(0x83, do_flush_windows) BAD_TRAP(0x84) BAD_TRAP(0x85)
-	BAD_TRAP(0x86) BAD_TRAP(0x87) SOLARIS_SYSCALL_TRAP
-	NETBSD_SYSCALL_TRAP BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c)
+	BAD_TRAP(0x86) BAD_TRAP(0x87) BAD_TRAP(0x88)
+	BAD_TRAP(0x89) BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c)
 	BAD_TRAP(0x8d) BAD_TRAP(0x8e) BAD_TRAP(0x8f)
 	LINUX_SYSCALL_TRAP BAD_TRAP(0x91) BAD_TRAP(0x92) BAD_TRAP(0x93) BAD_TRAP(0x94)
 	BAD_TRAP(0x95) BAD_TRAP(0x96) BAD_TRAP(0x97) BAD_TRAP(0x98) BAD_TRAP(0x99)
 	BAD_TRAP(0x9a) BAD_TRAP(0x9b) BAD_TRAP(0x9c) BAD_TRAP(0x9d) BAD_TRAP(0x9e)
 	BAD_TRAP(0x9f) GETCC_TRAP SETCC_TRAP GETPSR_TRAP
 	BAD_TRAP(0xa3) BAD_TRAP(0xa4) BAD_TRAP(0xa5) BAD_TRAP(0xa6)
-	INDIRECT_SOLARIS_SYSCALL(156) BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
+	BAD_TRAP(0xa7) BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
 	BAD_TRAP(0xac) BAD_TRAP(0xad) BAD_TRAP(0xae) BAD_TRAP(0xaf) BAD_TRAP(0xb0)
 	BAD_TRAP(0xb1) BAD_TRAP(0xb2) BAD_TRAP(0xb3) BAD_TRAP(0xb4) BAD_TRAP(0xb5)
 	BAD_TRAP(0xb6) BAD_TRAP(0xb7) BAD_TRAP(0xb8) BAD_TRAP(0xb9) BAD_TRAP(0xba)
@@ -379,19 +374,19 @@ trapbase_cpu3:
 	BAD_TRAP(0x74) BAD_TRAP(0x75) BAD_TRAP(0x76) BAD_TRAP(0x77) BAD_TRAP(0x78)
 	BAD_TRAP(0x79) BAD_TRAP(0x7a) BAD_TRAP(0x7b) BAD_TRAP(0x7c) BAD_TRAP(0x7d)
 	BAD_TRAP(0x7e) BAD_TRAP(0x7f)
-	SUNOS_SYSCALL_TRAP  
+	BAD_TRAP(0x80)
 	BREAKPOINT_TRAP
 	TRAP_ENTRY(0x82, do_hw_divzero)
 	TRAP_ENTRY(0x83, do_flush_windows) BAD_TRAP(0x84) BAD_TRAP(0x85)
-	BAD_TRAP(0x86) BAD_TRAP(0x87) SOLARIS_SYSCALL_TRAP
-	NETBSD_SYSCALL_TRAP BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c)
+	BAD_TRAP(0x86) BAD_TRAP(0x87) BAD_TRAP(0x88)
+	BAD_TRAP(0x89) BAD_TRAP(0x8a) BAD_TRAP(0x8b) BAD_TRAP(0x8c)
 	BAD_TRAP(0x8d) BAD_TRAP(0x8e) BAD_TRAP(0x8f)
 	LINUX_SYSCALL_TRAP BAD_TRAP(0x91) BAD_TRAP(0x92) BAD_TRAP(0x93) BAD_TRAP(0x94)
 	BAD_TRAP(0x95) BAD_TRAP(0x96) BAD_TRAP(0x97) BAD_TRAP(0x98) BAD_TRAP(0x99)
 	BAD_TRAP(0x9a) BAD_TRAP(0x9b) BAD_TRAP(0x9c) BAD_TRAP(0x9d) BAD_TRAP(0x9e)
 	BAD_TRAP(0x9f) GETCC_TRAP SETCC_TRAP GETPSR_TRAP
 	BAD_TRAP(0xa3) BAD_TRAP(0xa4) BAD_TRAP(0xa5) BAD_TRAP(0xa6)
-	INDIRECT_SOLARIS_SYSCALL(156) BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
+	BAD_TRAP(0xa7) BAD_TRAP(0xa8) BAD_TRAP(0xa9) BAD_TRAP(0xaa) BAD_TRAP(0xab)
 	BAD_TRAP(0xac) BAD_TRAP(0xad) BAD_TRAP(0xae) BAD_TRAP(0xaf) BAD_TRAP(0xb0)
 	BAD_TRAP(0xb1) BAD_TRAP(0xb2) BAD_TRAP(0xb3) BAD_TRAP(0xb4) BAD_TRAP(0xb5)
 	BAD_TRAP(0xb6) BAD_TRAP(0xb7) BAD_TRAP(0xb8) BAD_TRAP(0xb9) BAD_TRAP(0xba)
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index 0bd69d0b5cd7..70c0dd22491d 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -139,8 +139,6 @@ void cpu_idle(void)
 
 #endif
 
-extern char reboot_command [];
-
 /* XXX cli/sti -> local_irq_xxx here, check this works once SMP is fixed. */
 void machine_halt(void)
 {
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 5b54f11f4e59..7f44ae69b29e 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -325,7 +325,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	const struct user_regset_view *view;
 	int ret;
 
-	view = task_user_regset_view(child);
+	view = task_user_regset_view(current);
 
 	switch(request) {
 	case PTRACE_GETREGS: {
diff --git a/arch/sparc/kernel/sclow.S b/arch/sparc/kernel/sclow.S
deleted file mode 100644
index 136e37c53d49..000000000000
--- a/arch/sparc/kernel/sclow.S
+++ /dev/null
@@ -1,86 +0,0 @@
-/* sclow.S: Low level special syscall handling.
- *          Basically these are cases where we can completely
- *          handle the system call without saving any state
- *          because we know that the process will not sleep.
- *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/ptrace.h>
-#include <asm/asm-offsets.h>
-#include <asm/errno.h>
-#include <asm/winmacro.h>
-#include <asm/thread_info.h>
-#include <asm/psr.h>
-#include <asm/page.h>
-
-#define CC_AND_RETT  \
-	set	PSR_C, %l4; \
-	andn	%l0, %l4, %l4; \
-	wr	%l4, 0x0, %psr; \
-	nop; nop; nop; \
-	jmp	%l2; \
-	rett	%l2 + 4;
-
-#define SC_AND_RETT  \
-	set	PSR_C, %l4; \
-	or	%l0, %l4, %l4; \
-	wr	%l4, 0x0, %psr; \
-	nop; nop; nop; \
-	jmp	%l2; \
-	rett	%l2 + 4;
-
-#define LABEL(func)  func##_low
-
-	.globl	LABEL(sunosnop)
-LABEL(sunosnop):
-	CC_AND_RETT
-
-#if (ASIZ_task_uid == 2 && ASIZ_task_euid == 2)
-	.globl	LABEL(sunosgetuid)
-LABEL(sunosgetuid):
-	LOAD_CURRENT(l4, l5)
-	ld	[%l4 + TI_TASK], %l4
-	lduh	[%l4 + AOFF_task_uid], %i0
-	lduh	[%l4 + AOFF_task_euid], %i1
-	CC_AND_RETT
-#endif
-
-#if (ASIZ_task_gid == 2 && ASIZ_task_egid == 2)
-	.globl	LABEL(sunosgetgid)
-LABEL(sunosgetgid):
-	LOAD_CURRENT(l4, l5)
-	ld	[%l4 + TI_TASK], %l4
-	lduh	[%l4 + AOFF_task_gid], %i0
-	lduh	[%l4 + AOFF_task_egid], %i1
-	CC_AND_RETT
-#endif
-
-	.globl	LABEL(sunosmctl)
-LABEL(sunosmctl):
-	mov	0, %i0
-	CC_AND_RETT
-
-	.globl	LABEL(sunosgdtsize)
-LABEL(sunosgdtsize):	
-	mov	256, %i0
-	CC_AND_RETT
-
-	.globl	LABEL(getpagesize)
-LABEL(getpagesize):
-	set	PAGE_SIZE, %i0
-	CC_AND_RETT
-
-	/* XXX sys_nice() XXX */
-	/* XXX sys_setpriority() XXX */
-	/* XXX sys_getpriority() XXX */
-	/* XXX sys_setregid() XXX */
-	/* XXX sys_setgid() XXX */
-	/* XXX sys_setreuid() XXX */
-	/* XXX sys_setuid() XXX */
-	/* XXX sys_setfsuid() XXX */
-	/* XXX sys_setfsgid() XXX */
-	/* XXX sys_setpgid() XXX */
-	/* XXX sys_getpgid() XXX */
-	/* XXX sys_setsid() XXX */
-	/* XXX sys_getsid() XXX */
diff --git a/arch/sparc/kernel/semaphore.c b/arch/sparc/kernel/semaphore.c
deleted file mode 100644
index 0c37c1a7cd7e..000000000000
--- a/arch/sparc/kernel/semaphore.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/* $Id: semaphore.c,v 1.7 2001/04/18 21:06:05 davem Exp $ */
-
-/* sparc32 semaphore implementation, based on i386 version */
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- *  - only on a boundary condition do we need to care. When we go
- *    from a negative count to a non-negative, we wake people up.
- *  - when we go from a non-negative count to a negative do we
- *    (a) synchronize with the "sleeper" count and (b) make sure
- *    that we're on the wakeup list before we synchronize so that
- *    we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
-	wake_up(&sem->wait);
-}
-
-static DEFINE_SPINLOCK(semaphore_lock);
-
-void __sched __down(struct semaphore * sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	spin_lock_irq(&semaphore_lock);
-	sem->sleepers++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock.
-		 */
-		if (!atomic24_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irq(&semaphore_lock);
-
-		schedule();
-		tsk->state = TASK_UNINTERRUPTIBLE;
-		spin_lock_irq(&semaphore_lock);
-	}
-	spin_unlock_irq(&semaphore_lock);
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-	wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	tsk->state = TASK_INTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	spin_lock_irq(&semaphore_lock);
-	sem->sleepers ++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * With signals pending, this turns into
-		 * the trylock failure case - we won't be
-		 * sleeping, and we* can't get the lock as
-		 * it has contention. Just correct the count
-		 * and exit.
-		 */
-		if (signal_pending(current)) {
-			retval = -EINTR;
-			sem->sleepers = 0;
-			atomic24_add(sleepers, &sem->count);
-			break;
-		}
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock. The
-		 * "-1" is because we're still hoping to get
-		 * the lock.
-		 */
-		if (!atomic24_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irq(&semaphore_lock);
-
-		schedule();
-		tsk->state = TASK_INTERRUPTIBLE;
-		spin_lock_irq(&semaphore_lock);
-	}
-	spin_unlock_irq(&semaphore_lock);
-	tsk->state = TASK_RUNNING;
-	remove_wait_queue(&sem->wait, &wait);
-	wake_up(&sem->wait);
-	return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- */
-int __down_trylock(struct semaphore * sem)
-{
-	int sleepers;
-	unsigned long flags;
-
-	spin_lock_irqsave(&semaphore_lock, flags);
-	sleepers = sem->sleepers + 1;
-	sem->sleepers = 0;
-
-	/*
-	 * Add "everybody else" and us into it. They aren't
-	 * playing, because we own the spinlock.
-	 */
-	if (!atomic24_add_negative(sleepers, &sem->count))
-		wake_up(&sem->wait);
-
-	spin_unlock_irqrestore(&semaphore_lock, flags);
-	return 1;
-}
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 9994cac95078..1f730619a24a 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -22,7 +22,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
-#include <asm/svr4.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/cacheflush.h>	/* flush_sig_insns */
@@ -454,7 +453,6 @@ setup_frame(struct sigaction *sa, struct pt_regs *regs, int signr, sigset_t *old
 			break;
 		case SIGSYS:
 			if (info->si_code == (__SI_FAULT|0x100)) {
-				/* See sys_sunos.c */
 				sig_code = info->si_trapno;
 				break;
 			}
@@ -676,291 +674,17 @@ sigsegv:
 	force_sigsegv(signo, current);
 }
 
-/* Setup a Solaris stack frame */
-static inline void
-setup_svr4_frame(struct sigaction *sa, unsigned long pc, unsigned long npc,
-		 struct pt_regs *regs, int signr, sigset_t *oldset)
-{
-	svr4_signal_frame_t __user *sfp;
-	svr4_gregset_t  __user *gr;
-	svr4_siginfo_t  __user *si;
-	svr4_mcontext_t __user *mc;
-	svr4_gwindows_t __user *gw;
-	svr4_ucontext_t __user *uc;
-	svr4_sigset_t	setv;
-	struct thread_info *tp = current_thread_info();
-	int window = 0, err;
-
-	synchronize_user_stack();
-	sfp = (svr4_signal_frame_t __user *)
-		get_sigframe(sa, regs, SVR4_SF_ALIGNED + sizeof(struct reg_window));
-
-	if (invalid_frame_pointer(sfp, sizeof(*sfp)))
-		goto sigill_and_return;
-
-	/* Start with a clean frame pointer and fill it */
-	err = __clear_user(sfp, sizeof(*sfp));
-
-	/* Setup convenience variables */
-	si = &sfp->si;
-	uc = &sfp->uc;
-	gw = &sfp->gw;
-	mc = &uc->mcontext;
-	gr = &mc->greg;
-	
-	/* FIXME: where am I supposed to put this?
-	 * sc->sigc_onstack = old_status;
-	 * anyways, it does not look like it is used for anything at all.
-	 */
-	setv.sigbits[0] = oldset->sig[0];
-	setv.sigbits[1] = oldset->sig[1];
-	if (_NSIG_WORDS >= 4) {
-		setv.sigbits[2] = oldset->sig[2];
-		setv.sigbits[3] = oldset->sig[3];
-		err |= __copy_to_user(&uc->sigmask, &setv, sizeof(svr4_sigset_t));
-	} else
-		err |= __copy_to_user(&uc->sigmask, &setv,
-				      2 * sizeof(unsigned int));
-
-	/* Store registers */
-	err |= __put_user(regs->pc, &((*gr)[SVR4_PC]));
-	err |= __put_user(regs->npc, &((*gr)[SVR4_NPC]));
-	err |= __put_user(regs->psr, &((*gr)[SVR4_PSR]));
-	err |= __put_user(regs->y, &((*gr)[SVR4_Y]));
-	
-	/* Copy g[1..7] and o[0..7] registers */
-	err |= __copy_to_user(&(*gr)[SVR4_G1], &regs->u_regs[UREG_G1],
-			      sizeof(long) * 7);
-	err |= __copy_to_user(&(*gr)[SVR4_O0], &regs->u_regs[UREG_I0],
-			      sizeof(long) * 8);
-
-	/* Setup sigaltstack */
-	err |= __put_user(current->sas_ss_sp, &uc->stack.sp);
-	err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &uc->stack.flags);
-	err |= __put_user(current->sas_ss_size, &uc->stack.size);
-
-	/* Save the currently window file: */
-
-	/* 1. Link sfp->uc->gwins to our windows */
-	err |= __put_user(gw, &mc->gwin);
-	    
-	/* 2. Number of windows to restore at setcontext(): */
-	err |= __put_user(tp->w_saved, &gw->count);
-
-	/* 3. Save each valid window
-	 *    Currently, it makes a copy of the windows from the kernel copy.
-	 *    David's code for SunOS, makes the copy but keeps the pointer to
-	 *    the kernel.  My version makes the pointer point to a userland 
-	 *    copy of those.  Mhm, I wonder if I shouldn't just ignore those
-	 *    on setcontext and use those that are on the kernel, the signal
-	 *    handler should not be modyfing those, mhm.
-	 *
-	 *    These windows are just used in case synchronize_user_stack failed
-	 *    to flush the user windows.
-	 */
-	for (window = 0; window < tp->w_saved; window++) {
-		err |= __put_user((int __user *) &(gw->win[window]), &gw->winptr[window]);
-		err |= __copy_to_user(&gw->win[window],
-				      &tp->reg_window[window],
-				      sizeof(svr4_rwindow_t));
-		err |= __put_user(0, gw->winptr[window]);
-	}
-
-	/* 4. We just pay attention to the gw->count field on setcontext */
-	tp->w_saved = 0; /* So process is allowed to execute. */
-
-	/* Setup the signal information.  Solaris expects a bunch of
-	 * information to be passed to the signal handler, we don't provide
-	 * that much currently, should use siginfo.
-	 */
-	err |= __put_user(signr, &si->siginfo.signo);
-	err |= __put_user(SVR4_SINOINFO, &si->siginfo.code);
-	if (err)
-		goto sigsegv;
-
-	regs->u_regs[UREG_FP] = (unsigned long) sfp;
-	regs->pc = (unsigned long) sa->sa_handler;
-	regs->npc = (regs->pc + 4);
-
-	/* Arguments passed to signal handler */
-	if (regs->u_regs[14]){
-		struct reg_window __user *rw = (struct reg_window __user *)
-			regs->u_regs[14];
-
-		err |= __put_user(signr, &rw->ins[0]);
-		err |= __put_user(si, &rw->ins[1]);
-		err |= __put_user(uc, &rw->ins[2]);
-		err |= __put_user(sfp, &rw->ins[6]);	/* frame pointer */
-		if (err)
-			goto sigsegv;
-
-		regs->u_regs[UREG_I0] = signr;
-		regs->u_regs[UREG_I1] = (unsigned long) si;
-		regs->u_regs[UREG_I2] = (unsigned long) uc;
-	}
-	return;
-
-sigill_and_return:
-	do_exit(SIGILL);
-sigsegv:
-	force_sigsegv(signr, current);
-}
-
-asmlinkage int svr4_getcontext(svr4_ucontext_t __user *uc, struct pt_regs *regs)
-{
-	svr4_gregset_t  __user *gr;
-	svr4_mcontext_t __user *mc;
-	svr4_sigset_t	setv;
-	int err = 0;
-
-	synchronize_user_stack();
-
-	if (current_thread_info()->w_saved)
-		return -EFAULT;
-
-	err = clear_user(uc, sizeof(*uc));
-	if (err)
-		return -EFAULT;
-
-	/* Setup convenience variables */
-	mc = &uc->mcontext;
-	gr = &mc->greg;
-
-	setv.sigbits[0] = current->blocked.sig[0];
-	setv.sigbits[1] = current->blocked.sig[1];
-	if (_NSIG_WORDS >= 4) {
-		setv.sigbits[2] = current->blocked.sig[2];
-		setv.sigbits[3] = current->blocked.sig[3];
-		err |= __copy_to_user(&uc->sigmask, &setv, sizeof(svr4_sigset_t));
-	} else
-		err |= __copy_to_user(&uc->sigmask, &setv,
-				      2 * sizeof(unsigned int));
-
-	/* Store registers */
-	err |= __put_user(regs->pc, &uc->mcontext.greg[SVR4_PC]);
-	err |= __put_user(regs->npc, &uc->mcontext.greg[SVR4_NPC]);
-	err |= __put_user(regs->psr, &uc->mcontext.greg[SVR4_PSR]);
-	err |= __put_user(regs->y, &uc->mcontext.greg[SVR4_Y]);
-	
-	/* Copy g[1..7] and o[0..7] registers */
-	err |= __copy_to_user(&(*gr)[SVR4_G1], &regs->u_regs[UREG_G1],
-			      sizeof(uint) * 7);
-	err |= __copy_to_user(&(*gr)[SVR4_O0], &regs->u_regs[UREG_I0],
-			      sizeof(uint) * 8);
-
-	/* Setup sigaltstack */
-	err |= __put_user(current->sas_ss_sp, &uc->stack.sp);
-	err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &uc->stack.flags);
-	err |= __put_user(current->sas_ss_size, &uc->stack.size);
-
-	/* The register file is not saved
-	 * we have already stuffed all of it with sync_user_stack
-	 */
-	return (err ? -EFAULT : 0);
-}
-
-/* Set the context for a svr4 application, this is Solaris way to sigreturn */
-asmlinkage int svr4_setcontext(svr4_ucontext_t __user *c, struct pt_regs *regs)
-{
-	svr4_gregset_t  __user *gr;
-	unsigned long pc, npc, psr;
-	mm_segment_t old_fs;
-	sigset_t set;
-	svr4_sigset_t setv;
-	int err;
-	stack_t st;
-	
-	/* Fixme: restore windows, or is this already taken care of in
-	 * svr4_setup_frame when sync_user_windows is done?
-	 */
-	flush_user_windows();
-
-	if (current_thread_info()->w_saved)
-		goto sigsegv_and_return;
-
-	if (((unsigned long) c) & 3)
-		goto sigsegv_and_return;
-
-	if (!__access_ok((unsigned long)c, sizeof(*c)))
-		goto sigsegv_and_return;
-
-	/* Check for valid PC and nPC */
-	gr = &c->mcontext.greg;
-	err = __get_user(pc, &((*gr)[SVR4_PC]));
-	err |= __get_user(npc, &((*gr)[SVR4_NPC]));
-
-	if ((pc | npc) & 3)
-		goto sigsegv_and_return;
-
-	/* Retrieve information from passed ucontext */
-	/* note that nPC is ored a 1, this is used to inform entry.S */
-	/* that we don't want it to mess with our PC and nPC */
-
-	/* This is pretty much atomic, no amount locking would prevent
-	 * the races which exist anyways.
-	 */
-	err |= __copy_from_user(&setv, &c->sigmask, sizeof(svr4_sigset_t));
-	
-	err |= __get_user(st.ss_sp, &c->stack.sp);
-	err |= __get_user(st.ss_flags, &c->stack.flags);
-	err |= __get_user(st.ss_size, &c->stack.size);
-	
-	if (err)
-		goto sigsegv_and_return;
-		
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	do_sigaltstack((const stack_t __user *) &st, NULL,
-		       regs->u_regs[UREG_I6]);
-	set_fs(old_fs);
-	
-	set.sig[0] = setv.sigbits[0];
-	set.sig[1] = setv.sigbits[1];
-	if (_NSIG_WORDS >= 4) {
-		set.sig[2] = setv.sigbits[2];
-		set.sig[3] = setv.sigbits[3];
-	}
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->pc = pc;
-	regs->npc = npc | 1;
-	err |= __get_user(regs->y, &((*gr)[SVR4_Y]));
-	err |= __get_user(psr, &((*gr)[SVR4_PSR]));
-	regs->psr &= ~(PSR_ICC);
-	regs->psr |= (psr & PSR_ICC);
-
-	/* Restore g[1..7] and o[0..7] registers */
-	err |= __copy_from_user(&regs->u_regs[UREG_G1], &(*gr)[SVR4_G1],
-			      sizeof(long) * 7);
-	err |= __copy_from_user(&regs->u_regs[UREG_I0], &(*gr)[SVR4_O0],
-			      sizeof(long) * 8);
-	return (err ? -EFAULT : 0);
-
-sigsegv_and_return:
-	force_sig(SIGSEGV, current);
-	return -EFAULT;
-}
-
 static inline void
 handle_signal(unsigned long signr, struct k_sigaction *ka,
-	      siginfo_t *info, sigset_t *oldset, struct pt_regs *regs,
-	      int svr4_signal)
+	      siginfo_t *info, sigset_t *oldset, struct pt_regs *regs)
 {
-	if (svr4_signal)
-		setup_svr4_frame(&ka->sa, regs->pc, regs->npc, regs, signr, oldset);
-	else {
-		if (ka->sa.sa_flags & SA_SIGINFO)
-			new_setup_rt_frame(ka, regs, signr, oldset, info);
-		else if (current->thread.new_signal)
-			new_setup_frame(ka, regs, signr, oldset);
-		else
-			setup_frame(&ka->sa, regs, signr, oldset, info);
-	}
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		new_setup_rt_frame(ka, regs, signr, oldset, info);
+	else if (current->thread.new_signal)
+		new_setup_frame(ka, regs, signr, oldset);
+	else
+		setup_frame(&ka->sa, regs, signr, oldset, info);
+
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NOMASK))
@@ -1002,17 +726,6 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0, int rest
 	int signr;
 	sigset_t *oldset;
 
-	/*
-	 * XXX Disable svr4 signal handling until solaris emulation works.
-	 * It is buggy - Anton
-	 */
-#define SVR4_SIGNAL_BROKEN 1
-#ifdef SVR4_SIGNAL_BROKEN
-	int svr4_signal = 0;
-#else
-	int svr4_signal = current->personality == PER_SVR4;
-#endif
-
 	cookie.restart_syscall = restart_syscall;
 	cookie.orig_i0 = orig_i0;
 
@@ -1025,8 +738,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0, int rest
 	if (signr > 0) {
 		if (cookie.restart_syscall)
 			syscall_restart(cookie.orig_i0, regs, &ka.sa);
-		handle_signal(signr, &ka, &info, oldset,
-			      regs, svr4_signal);
+		handle_signal(signr, &ka, &info, oldset, regs);
+
 		/* a signal was successfully delivered; the saved
 		 * sigmask will have been stored in the signal frame,
 		 * and will be restored by sigreturn, so we can simply
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index c1025e551650..0bcf98a7ef38 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -36,12 +36,10 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/idprom.h>
-#include <asm/svr4.h>
 #include <asm/head.h>
 #include <asm/smp.h>
 #include <asm/mostek.h>
 #include <asm/ptrace.h>
-#include <asm/user.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
 #ifdef CONFIG_SBUS
@@ -62,8 +60,6 @@ struct poll {
 	short revents;
 };
 
-extern int svr4_getcontext (svr4_ucontext_t *, struct pt_regs *);
-extern int svr4_setcontext (svr4_ucontext_t *, struct pt_regs *);
 extern void (*__copy_1page)(void *, const void *);
 extern void __memmove(void *, const void *, __kernel_size_t);
 extern void (*bzero_1page)(void *);
@@ -107,11 +103,6 @@ EXPORT_SYMBOL(___rw_read_try);
 EXPORT_SYMBOL(___rw_read_exit);
 EXPORT_SYMBOL(___rw_write_enter);
 #endif
-/* semaphores */
-EXPORT_SYMBOL(__up);
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__down_interruptible);
 
 EXPORT_SYMBOL(sparc_valid_addr_bitmap);
 EXPORT_SYMBOL(phys_base);
@@ -209,10 +200,6 @@ EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
 #endif
 
-/* Solaris/SunOS binary compatibility */
-EXPORT_SYMBOL(svr4_setcontext);
-EXPORT_SYMBOL(svr4_getcontext);
-
 /* prom symbols */
 EXPORT_SYMBOL(idprom);
 EXPORT_SYMBOL(prom_root_node);
diff --git a/arch/sparc/kernel/sunos_asm.S b/arch/sparc/kernel/sunos_asm.S
deleted file mode 100644
index 07fe86014fb5..000000000000
--- a/arch/sparc/kernel/sunos_asm.S
+++ /dev/null
@@ -1,67 +0,0 @@
-/* $Id: sunos_asm.S,v 1.15 2000/01/11 17:33:21 jj Exp $
- * sunos_asm.S: SunOS system calls which must have a low-level
- *              entry point to operate correctly.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * Based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#include <asm/ptrace.h>
-
-	.text
-	.align 4
-
-	/* When calling ret_sys_call, %o0 should contain the same
-	 * value as in [%sp + STACKFRAME_SZ + PT_I0] */
-
-	/* SunOS getpid() returns pid in %o0 and ppid in %o1 */
-	.globl	sunos_getpid
-sunos_getpid:
-	call	sys_getppid
-	 nop
-
-	call	sys_getpid
-	 st	%o0, [%sp + STACKFRAME_SZ + PT_I1]
-
-	b	ret_sys_call
-	 st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-
-	/* SunOS getuid() returns uid in %o0 and euid in %o1 */
-	.globl	sunos_getuid
-sunos_getuid:
-	call	sys_geteuid16
-	 nop
-
-	call	sys_getuid16
-	 st	%o0, [%sp + STACKFRAME_SZ + PT_I1]
-
-	b	ret_sys_call
-	 st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-
-	/* SunOS getgid() returns gid in %o0 and egid in %o1 */
-	.globl	sunos_getgid
-sunos_getgid:
-	call	sys_getegid16
-	 nop
-
-	call	sys_getgid16
-	 st	%o0, [%sp + STACKFRAME_SZ + PT_I1]
-
-	b	ret_sys_call
-	 st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
-
-	/* SunOS's execv() call only specifies the argv argument, the
-	 * environment settings are the same as the calling processes.
-	 */
-	.globl	sunos_execv
-sunos_execv:
-	st	%g0, [%sp + STACKFRAME_SZ + PT_I2]
-
-	call	sparc_execve
-	 add	%sp, STACKFRAME_SZ, %o0
-
-	b	ret_sys_call
-	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
diff --git a/arch/sparc/kernel/sunos_ioctl.c b/arch/sparc/kernel/sunos_ioctl.c
deleted file mode 100644
index e613cc6a10ba..000000000000
--- a/arch/sparc/kernel/sunos_ioctl.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/* $Id: sunos_ioctl.c,v 1.34 2000/09/03 14:10:56 anton Exp $
- * sunos_ioctl.c: The Linux Operating system: SunOS ioctl compatibility.
- * 
- * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/uaccess.h>
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/termios.h>
-#include <linux/tty.h>
-#include <linux/ioctl.h>
-#include <linux/route.h>
-#include <linux/sockios.h>
-#include <linux/if.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/file.h>
-
-#if 0
-extern char sunkbd_type;
-extern char sunkbd_layout;
-#endif
-
-/* NR_OPEN is now larger and dynamic in recent kernels. */
-#define SUNOS_NR_OPEN	256
-
-asmlinkage int sunos_ioctl (int fd, unsigned long cmd, unsigned long arg)
-{
-	int ret = -EBADF;
-
-	if (fd >= SUNOS_NR_OPEN || !fcheck(fd))
-		goto out;
-
-	/* First handle an easy compat. case for tty ldisc. */
-	if (cmd == TIOCSETD) {
-		int __user *p;
-		int ntty = N_TTY, tmp;
-		mm_segment_t oldfs;
-
-		p = (int __user *) arg;
-		ret = -EFAULT;
-		if (get_user(tmp, p))
-			goto out;
-		if (tmp == 2) {
-			oldfs = get_fs();
-			set_fs(KERNEL_DS);
-			ret = sys_ioctl(fd, cmd, (unsigned long) &ntty);
-			set_fs(oldfs);
-			ret = (ret == -EINVAL ? -EOPNOTSUPP : ret);
-			goto out;
-		}
-	}
-
-	/* Binary compatibility is good American knowhow fuckin' up. */
-	if (cmd == TIOCNOTTY) {
-		ret = sys_setsid();
-		goto out;
-	}
-
-	/* SunOS networking ioctls. */
-	switch (cmd) {
-	case _IOW('r', 10, struct rtentry):
-		ret = sys_ioctl(fd, SIOCADDRT, arg);
-		goto out;
-	case _IOW('r', 11, struct rtentry):
-		ret = sys_ioctl(fd, SIOCDELRT, arg);
-		goto out;
-	case _IOW('i', 12, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFADDR, arg);
-		goto out;
-	case _IOWR('i', 13, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFADDR, arg);
-		goto out;
-	case _IOW('i', 14, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFDSTADDR, arg);
-		goto out;
-	case _IOWR('i', 15, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFDSTADDR, arg);
-		goto out;
-	case _IOW('i', 16, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFFLAGS, arg);
-		goto out;
-	case _IOWR('i', 17, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFFLAGS, arg);
-		goto out;
-	case _IOW('i', 18, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFMEM, arg);
-		goto out;
-	case _IOWR('i', 19, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFMEM, arg);
-		goto out;
-	case _IOWR('i', 20, struct ifconf):
-		ret = sys_ioctl(fd, SIOCGIFCONF, arg);
-		goto out;
-	case _IOW('i', 21, struct ifreq): /* SIOCSIFMTU */
-		ret = sys_ioctl(fd, SIOCSIFMTU, arg);
-		goto out;
-	case _IOWR('i', 22, struct ifreq): /* SIOCGIFMTU */
-		ret = sys_ioctl(fd, SIOCGIFMTU, arg);
-		goto out;
-
-	case _IOWR('i', 23, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFBRDADDR, arg);
-		goto out;
-	case _IOW('i', 24, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFBRDADDR, arg);
-		goto out;
-	case _IOWR('i', 25, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFNETMASK, arg);
-		goto out;
-	case _IOW('i', 26, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFNETMASK, arg);
-		goto out;
-	case _IOWR('i', 27, struct ifreq):
-		ret = sys_ioctl(fd, SIOCGIFMETRIC, arg);
-		goto out;
-	case _IOW('i', 28, struct ifreq):
-		ret = sys_ioctl(fd, SIOCSIFMETRIC, arg);
-		goto out;
-
-	case _IOW('i', 30, struct arpreq):
-		ret = sys_ioctl(fd, SIOCSARP, arg);
-		goto out;
-	case _IOWR('i', 31, struct arpreq):
-		ret = sys_ioctl(fd, SIOCGARP, arg);
-		goto out;
-	case _IOW('i', 32, struct arpreq):
-		ret = sys_ioctl(fd, SIOCDARP, arg);
-		goto out;
-
-	case _IOW('i', 40, struct ifreq): /* SIOCUPPER */
-	case _IOW('i', 41, struct ifreq): /* SIOCLOWER */
-	case _IOW('i', 44, struct ifreq): /* SIOCSETSYNC */
-	case _IOW('i', 45, struct ifreq): /* SIOCGETSYNC */
-	case _IOW('i', 46, struct ifreq): /* SIOCSSDSTATS */
-	case _IOW('i', 47, struct ifreq): /* SIOCSSESTATS */
-	case _IOW('i', 48, struct ifreq): /* SIOCSPROMISC */
-		ret = -EOPNOTSUPP;
-		goto out;
-
-	case _IOW('i', 49, struct ifreq):
-		ret = sys_ioctl(fd, SIOCADDMULTI, arg);
-		goto out;
-	case _IOW('i', 50, struct ifreq):
-		ret = sys_ioctl(fd, SIOCDELMULTI, arg);
-		goto out;
-
-	/* FDDI interface ioctls, unsupported. */
-		
-	case _IOW('i', 51, struct ifreq): /* SIOCFDRESET */
-	case _IOW('i', 52, struct ifreq): /* SIOCFDSLEEP */
-	case _IOW('i', 53, struct ifreq): /* SIOCSTRTFMWAR */
-	case _IOW('i', 54, struct ifreq): /* SIOCLDNSTRTFW */
-	case _IOW('i', 55, struct ifreq): /* SIOCGETFDSTAT */
-	case _IOW('i', 56, struct ifreq): /* SIOCFDNMIINT */
-	case _IOW('i', 57, struct ifreq): /* SIOCFDEXUSER */
-	case _IOW('i', 58, struct ifreq): /* SIOCFDGNETMAP */
-	case _IOW('i', 59, struct ifreq): /* SIOCFDGIOCTL */
-		printk("FDDI ioctl, returning EOPNOTSUPP\n");
-		ret = -EOPNOTSUPP;
-		goto out;
-
-	case _IOW('t', 125, int):
-		/* More stupid tty sunos ioctls, just
-		 * say it worked.
-		 */
-		ret = 0;
-		goto out;
-	/* Non posix grp */
-	case _IOW('t', 118, int): {
-		int oldval, newval, __user *ptr;
-
-		cmd = TIOCSPGRP;
-		ptr = (int __user *) arg;
-		ret = -EFAULT;
-		if (get_user(oldval, ptr))
-			goto out;
-		ret = sys_ioctl(fd, cmd, arg);
-		__get_user(newval, ptr);
-		if (newval == -1) {
-			__put_user(oldval, ptr);
-			ret = -EIO;
-		}
-		if (ret == -ENOTTY)
-			ret = -EIO;
-		goto out;
-	}
-
-	case _IOR('t', 119, int): {
-		int oldval, newval, __user *ptr;
-
-		cmd = TIOCGPGRP;
-		ptr = (int __user *) arg;
-		ret = -EFAULT;
-		if (get_user(oldval, ptr))
-			goto out;
-		ret = sys_ioctl(fd, cmd, arg);
-		__get_user(newval, ptr);
-		if (newval == -1) {
-			__put_user(oldval, ptr);
-			ret = -EIO;
-		}
-		if (ret == -ENOTTY)
-			ret = -EIO;
-		goto out;
-	}
-	}
-
-#if 0
-	if ((cmd & 0xff00) == ('k' << 8)) {
-		printk ("[[KBIO: %8.8x\n", (unsigned int) cmd);
-	}
-#endif
-
-	ret = sys_ioctl(fd, cmd, arg);
-	/* so stupid... */
-	ret = (ret == -EINVAL ? -EOPNOTSUPP : ret);
-out:
-	return ret;
-}
-
-
diff --git a/arch/sparc/kernel/sys_solaris.c b/arch/sparc/kernel/sys_solaris.c
deleted file mode 100644
index 2226a5992484..000000000000
--- a/arch/sparc/kernel/sys_solaris.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * linux/arch/sparc/kernel/sys_solaris.c
- *
- * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/personality.h>
-#include <linux/ptrace.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-
-asmlinkage int
-do_solaris_syscall (struct pt_regs *regs)
-{
-	static int cnt = 0;
-	if (++cnt < 10) printk ("No solaris handler\n");
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-#ifndef CONFIG_SUNOS_EMUL
-asmlinkage int
-do_sunos_syscall (struct pt_regs *regs)
-{
-	static int cnt = 0;
-	if (++cnt < 10) printk ("SunOS binary emulation not compiled in\n");
-	force_sig (SIGSEGV, current);
-	return 0;
-}
-#endif
diff --git a/arch/sparc/kernel/sys_sunos.c b/arch/sparc/kernel/sys_sunos.c
deleted file mode 100644
index 28c187c5d9fd..000000000000
--- a/arch/sparc/kernel/sys_sunos.c
+++ /dev/null
@@ -1,1210 +0,0 @@
-/* $Id: sys_sunos.c,v 1.137 2002/02/08 03:57:14 davem Exp $
- * sys_sunos.c: SunOS specific syscall compatibility support.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
- *
- * Based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/resource.h>
-#include <linux/ipc.h>
-#include <linux/shm.h>
-#include <linux/msg.h>
-#include <linux/sem.h>
-#include <linux/signal.h>
-#include <linux/uio.h>
-#include <linux/utsname.h>
-#include <linux/major.h>
-#include <linux/stat.h>
-#include <linux/slab.h>
-#include <linux/pagemap.h>
-#include <linux/capability.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/syscalls.h>
-
-#include <net/sock.h>
-
-#include <asm/uaccess.h>
-#ifndef KERNEL_DS
-#include <linux/segment.h>
-#endif
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/pconf.h>
-#include <asm/idprom.h> /* for gethostid() */
-#include <asm/unistd.h>
-#include <asm/system.h>
-
-/* For the nfs mount emulation */
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs_mount.h>
-
-/* for sunos_select */
-#include <linux/time.h>
-#include <linux/personality.h>
-
-/* NR_OPEN is now larger and dynamic in recent kernels. */
-#define SUNOS_NR_OPEN	256
-
-/* We use the SunOS mmap() semantics. */
-asmlinkage unsigned long sunos_mmap(unsigned long addr, unsigned long len,
-				    unsigned long prot, unsigned long flags,
-				    unsigned long fd, unsigned long off)
-{
-	struct file * file = NULL;
-	unsigned long retval, ret_type;
-
-	if (flags & MAP_NORESERVE) {
-		static int cnt;
-		if (cnt++ < 10)
-			printk("%s: unimplemented SunOS MAP_NORESERVE mmap() flag\n",
-			       current->comm);
-		flags &= ~MAP_NORESERVE;
-	}
-	retval = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (fd >= SUNOS_NR_OPEN)
-			goto out;
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	retval = -EINVAL;
-	/* If this is ld.so or a shared library doing an mmap
-	 * of /dev/zero, transform it into an anonymous mapping.
-	 * SunOS is so stupid some times... hmph!
-	 */
-	if (file) {
-		if (imajor(file->f_path.dentry->d_inode) == MEM_MAJOR &&
-		    iminor(file->f_path.dentry->d_inode) == 5) {
-			flags |= MAP_ANONYMOUS;
-			fput(file);
-			file = NULL;
-		}
-	}
-	ret_type = flags & _MAP_NEW;
-	flags &= ~_MAP_NEW;
-
-	if (!(flags & MAP_FIXED))
-		addr = 0;
-	else {
-		if (ARCH_SUN4C_SUN4 &&
-		    (len > 0x20000000 ||
-		     ((flags & MAP_FIXED) &&
-		      addr < 0xe0000000 && addr + len > 0x20000000)))
-			goto out_putf;
-
-		/* See asm-sparc/uaccess.h */
-		if (len > TASK_SIZE - PAGE_SIZE ||
-		    addr + len > TASK_SIZE - PAGE_SIZE)
-			goto out_putf;
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap(file, addr, len, prot, flags, off);
-	up_write(&current->mm->mmap_sem);
-	if (!ret_type)
-		retval = ((retval < PAGE_OFFSET) ? 0 : retval);
-
-out_putf:
-	if (file)
-		fput(file);
-out:
-	return retval;
-}
-
-/* lmbench calls this, just say "yeah, ok" */
-asmlinkage int sunos_mctl(unsigned long addr, unsigned long len, int function, char *arg)
-{
-	return 0;
-}
-
-/* SunOS is completely broken... it returns 0 on success, otherwise
- * ENOMEM.  For sys_sbrk() it wants the old brk value as a return
- * on success and ENOMEM as before on failure.
- */
-asmlinkage int sunos_brk(unsigned long brk)
-{
-	int freepages, retval = -ENOMEM;
-	unsigned long rlim;
-	unsigned long newbrk, oldbrk;
-
-	down_write(&current->mm->mmap_sem);
-	if (ARCH_SUN4C_SUN4) {
-		if (brk >= 0x20000000 && brk < 0xe0000000) {
-			goto out;
-		}
-	}
-
-	if (brk < current->mm->end_code)
-		goto out;
-
-	newbrk = PAGE_ALIGN(brk);
-	oldbrk = PAGE_ALIGN(current->mm->brk);
-	retval = 0;
-	if (oldbrk == newbrk) {
-		current->mm->brk = brk;
-		goto out;
-	}
-
-	/*
-	 * Always allow shrinking brk
-	 */
-	if (brk <= current->mm->brk) {
-		current->mm->brk = brk;
-		do_munmap(current->mm, newbrk, oldbrk-newbrk);
-		goto out;
-	}
-	/*
-	 * Check against rlimit and stack..
-	 */
-	retval = -ENOMEM;
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim >= RLIM_INFINITY)
-		rlim = ~0;
-	if (brk - current->mm->end_code > rlim)
-		goto out;
-
-	/*
-	 * Check against existing mmap mappings.
-	 */
-	if (find_vma_intersection(current->mm, oldbrk, newbrk+PAGE_SIZE))
-		goto out;
-
-	/*
-	 * stupid algorithm to decide if we have enough memory: while
-	 * simple, it hopefully works in most obvious cases.. Easy to
-	 * fool it, but this should catch most mistakes.
-	 */
-	freepages = global_page_state(NR_FILE_PAGES);
-	freepages >>= 1;
-	freepages += nr_free_pages();
-	freepages += nr_swap_pages;
-	freepages -= num_physpages >> 4;
-	freepages -= (newbrk-oldbrk) >> PAGE_SHIFT;
-	if (freepages < 0)
-		goto out;
-	/*
-	 * Ok, we have probably got enough memory - let it rip.
-	 */
-	current->mm->brk = brk;
-	do_brk(oldbrk, newbrk-oldbrk);
-	retval = 0;
-out:
-	up_write(&current->mm->mmap_sem);
-	return retval;
-}
-
-asmlinkage unsigned long sunos_sbrk(int increment)
-{
-	int error;
-	unsigned long oldbrk;
-
-	/* This should do it hopefully... */
-	lock_kernel();
-	oldbrk = current->mm->brk;
-	error = sunos_brk(((int) current->mm->brk) + increment);
-	if (!error)
-		error = oldbrk;
-	unlock_kernel();
-	return error;
-}
-
-/* XXX Completely undocumented, and completely magic...
- * XXX I believe it is to increase the size of the stack by
- * XXX argument 'increment' and return the new end of stack
- * XXX area.  Wheee...
- */
-asmlinkage unsigned long sunos_sstk(int increment)
-{
-	lock_kernel();
-	printk("%s: Call to sunos_sstk(increment<%d>) is unsupported\n",
-	       current->comm, increment);
-	unlock_kernel();
-	return -1;
-}
-
-/* Give hints to the kernel as to what paging strategy to use...
- * Completely bogus, don't remind me.
- */
-#define VA_NORMAL     0 /* Normal vm usage expected */
-#define VA_ABNORMAL   1 /* Abnormal/random vm usage probable */
-#define VA_SEQUENTIAL 2 /* Accesses will be of a sequential nature */
-#define VA_INVALIDATE 3 /* Page table entries should be flushed ??? */
-static char *vstrings[] = {
-	"VA_NORMAL",
-	"VA_ABNORMAL",
-	"VA_SEQUENTIAL",
-	"VA_INVALIDATE",
-};
-
-asmlinkage void sunos_vadvise(unsigned long strategy)
-{
-	/* I wanna see who uses this... */
-	lock_kernel();
-	printk("%s: Advises us to use %s paging strategy\n",
-	       current->comm,
-	       strategy <= 3 ? vstrings[strategy] : "BOGUS");
-	unlock_kernel();
-}
-
-/* This just wants the soft limit (ie. rlim_cur element) of the RLIMIT_NOFILE
- * resource limit and is for backwards compatibility with older sunos
- * revs.
- */
-asmlinkage long sunos_getdtablesize(void)
-{
-	return SUNOS_NR_OPEN;
-}
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage unsigned long sunos_sigblock(unsigned long blk_mask)
-{
-	unsigned long old;
-
-	spin_lock_irq(&current->sighand->siglock);
-	old = current->blocked.sig[0];
-	current->blocked.sig[0] |= (blk_mask & _BLOCKABLE);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	return old;
-}
-
-asmlinkage unsigned long sunos_sigsetmask(unsigned long newmask)
-{
-	unsigned long retval;
-
-	spin_lock_irq(&current->sighand->siglock);
-	retval = current->blocked.sig[0];
-	current->blocked.sig[0] = (newmask & _BLOCKABLE);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	return retval;
-}
-
-/* SunOS getdents is very similar to the newer Linux (iBCS2 compliant)    */
-/* getdents system call, the format of the structure just has a different */
-/* layout (d_off+d_ino instead of d_ino+d_off) */
-struct sunos_dirent {
-    long           d_off;
-    unsigned long  d_ino;
-    unsigned short d_reclen;
-    unsigned short d_namlen;
-    char           d_name[1];
-};
-
-struct sunos_dirent_callback {
-    struct sunos_dirent __user *curr;
-    struct sunos_dirent __user *previous;
-    int count;
-    int error;
-};
-
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
-#define ROUND_UP(x) (((x)+sizeof(long)-1) & ~(sizeof(long)-1))
-
-static int sunos_filldir(void * __buf, const char * name, int namlen,
-			 loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct sunos_dirent __user *dirent;
-	struct sunos_dirent_callback * buf = __buf;
-	unsigned long d_ino;
-	int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1);
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	if (dirent)
-		put_user(offset, &dirent->d_off);
-	dirent = buf->curr;
-	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *) dirent + reclen;
-	buf->curr = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage int sunos_getdents(unsigned int fd, void __user *dirent, int cnt)
-{
-	struct file * file;
-	struct sunos_dirent __user *lastdirent;
-	struct sunos_dirent_callback buf;
-	int error = -EBADF;
-
-	if (fd >= SUNOS_NR_OPEN)
-		goto out;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct sunos_dirent) + 255))
-		goto out_putf;
-
-	buf.curr = (struct sunos_dirent __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-
-	error = vfs_readdir(file, sunos_filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	lastdirent = buf.previous;
-	error = buf.error;
-	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = cnt - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-/* Old sunos getdirentries, severely broken compatibility stuff here. */
-struct sunos_direntry {
-    unsigned long  d_ino;
-    unsigned short d_reclen;
-    unsigned short d_namlen;
-    char           d_name[1];
-};
-
-struct sunos_direntry_callback {
-    struct sunos_direntry __user *curr;
-    struct sunos_direntry __user *previous;
-    int count;
-    int error;
-};
-
-static int sunos_filldirentry(void * __buf, const char * name, int namlen,
-			      loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct sunos_direntry __user *dirent;
-	struct sunos_direntry_callback *buf = __buf;
-	unsigned long d_ino;
-	int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1);
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	dirent = buf->curr;
-	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *) dirent + reclen;
-	buf->curr = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage int sunos_getdirentries(unsigned int fd, void __user *dirent,
-				   int cnt, unsigned int __user *basep)
-{
-	struct file * file;
-	struct sunos_direntry __user *lastdirent;
-	struct sunos_direntry_callback buf;
-	int error = -EBADF;
-
-	if (fd >= SUNOS_NR_OPEN)
-		goto out;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct sunos_direntry) + 255))
-		goto out_putf;
-
-	buf.curr = (struct sunos_direntry __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-
-	error = vfs_readdir(file, sunos_filldirentry, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	lastdirent = buf.previous;
-	error = buf.error;
-	if (lastdirent) {
-		put_user(file->f_pos, basep);
-		error = cnt - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-struct sunos_utsname {
-	char sname[9];
-	char nname[9];
-	char nnext[56];
-	char rel[9];
-	char ver[9];
-	char mach[9];
-};
-
-asmlinkage int sunos_uname(struct sunos_utsname __user *name)
-{
-	int ret;
-	down_read(&uts_sem);
-	ret = copy_to_user(&name->sname[0], &utsname()->sysname[0],
-			   sizeof(name->sname) - 1);
-	if (!ret) {
-		ret |= __copy_to_user(&name->nname[0], &utsname()->nodename[0],
-				      sizeof(name->nname) - 1);
-		ret |= __put_user('\0', &name->nname[8]);
-		ret |= __copy_to_user(&name->rel[0], &utsname()->release[0],
-				      sizeof(name->rel) - 1);
-		ret |= __copy_to_user(&name->ver[0], &utsname()->version[0],
-				      sizeof(name->ver) - 1);
-		ret |= __copy_to_user(&name->mach[0], &utsname()->machine[0],
-				      sizeof(name->mach) - 1);
-	}
-	up_read(&uts_sem);
-	return ret ? -EFAULT : 0;
-}
-
-asmlinkage int sunos_nosys(void)
-{
-	struct pt_regs *regs;
-	siginfo_t info;
-	static int cnt;
-
-	lock_kernel();
-	regs = current->thread.kregs;
-	info.si_signo = SIGSYS;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT|0x100;
-	info.si_addr = (void __user *)regs->pc;
-	info.si_trapno = regs->u_regs[UREG_G1];
-	send_sig_info(SIGSYS, &info, current);
-	if (cnt++ < 4) {
-		printk("Process makes ni_syscall number %d, register dump:\n",
-		       (int) regs->u_regs[UREG_G1]);
-		show_regs(regs);
-	}
-	unlock_kernel();
-	return -ENOSYS;
-}
-
-/* This is not a real and complete implementation yet, just to keep
- * the easy SunOS binaries happy.
- */
-asmlinkage int sunos_fpathconf(int fd, int name)
-{
-	int ret;
-
-	switch(name) {
-	case _PCONF_LINK:
-		ret = LINK_MAX;
-		break;
-	case _PCONF_CANON:
-		ret = MAX_CANON;
-		break;
-	case _PCONF_INPUT:
-		ret = MAX_INPUT;
-		break;
-	case _PCONF_NAME:
-		ret = NAME_MAX;
-		break;
-	case _PCONF_PATH:
-		ret = PATH_MAX;
-		break;
-	case _PCONF_PIPE:
-		ret = PIPE_BUF;
-		break;
-	case _PCONF_CHRESTRICT:		/* XXX Investigate XXX */
-		ret = 1;
-		break;
-	case _PCONF_NOTRUNC:		/* XXX Investigate XXX */
-	case _PCONF_VDISABLE:
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-asmlinkage int sunos_pathconf(char __user *path, int name)
-{
-	int ret;
-
-	ret = sunos_fpathconf(0, name); /* XXX cheese XXX */
-	return ret;
-}
-
-/* SunOS mount system call emulation */
-
-asmlinkage int sunos_select(int width, fd_set __user *inp, fd_set __user *outp,
-			    fd_set __user *exp, struct timeval __user *tvp)
-{
-	int ret;
-
-	/* SunOS binaries expect that select won't change the tvp contents */
-	ret = sys_select (width, inp, outp, exp, tvp);
-	if (ret == -EINTR && tvp) {
-		time_t sec, usec;
-
-		__get_user(sec, &tvp->tv_sec);
-		__get_user(usec, &tvp->tv_usec);
-
-		if (sec == 0 && usec == 0)
-			ret = 0;
-	}
-	return ret;
-}
-
-asmlinkage void sunos_nop(void)
-{
-	return;
-}
-
-/* SunOS mount/umount. */
-#define SMNT_RDONLY       1
-#define SMNT_NOSUID       2
-#define SMNT_NEWTYPE      4
-#define SMNT_GRPID        8
-#define SMNT_REMOUNT      16
-#define SMNT_NOSUB        32
-#define SMNT_MULTI        64
-#define SMNT_SYS5         128
-
-struct sunos_fh_t {
-	char fh_data [NFS_FHSIZE];
-};
-
-struct sunos_nfs_mount_args {
-	struct sockaddr_in  __user *addr; /* file server address */
-	struct nfs_fh __user *fh;     /* File handle to be mounted */
-	int        flags;      /* flags */
-	int        wsize;      /* write size in bytes */
-	int        rsize;      /* read size in bytes */
-	int        timeo;      /* initial timeout in .1 secs */
-	int        retrans;    /* times to retry send */
-	char       __user *hostname;  /* server's hostname */
-	int        acregmin;   /* attr cache file min secs */
-	int        acregmax;   /* attr cache file max secs */
-	int        acdirmin;   /* attr cache dir min secs */
-	int        acdirmax;   /* attr cache dir max secs */
-	char       __user *netname;   /* server's netname */
-};
-
-
-/* Bind the socket on a local reserved port and connect it to the
- * remote server.  This on Linux/i386 is done by the mount program,
- * not by the kernel.
- */
-static int
-sunos_nfs_get_server_fd (int fd, struct sockaddr_in *addr)
-{
-	struct sockaddr_in local;
-	struct sockaddr_in server;
-	int    try_port;
-	struct socket *socket;
-	struct inode  *inode;
-	struct file   *file;
-	int    ret, result = 0;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	inode = file->f_path.dentry->d_inode;
-
-	socket = SOCKET_I(inode);
-	local.sin_family = AF_INET;
-	local.sin_addr.s_addr = INADDR_ANY;
-
-	/* IPPORT_RESERVED = 1024, can't find the definition in the kernel */
-	try_port = 1024;
-	do {
-		local.sin_port = htons (--try_port);
-		ret = socket->ops->bind(socket, (struct sockaddr*)&local,
-					sizeof(local));
-	} while (ret && try_port > (1024 / 2));
-
-	if (ret)
-		goto out_putf;
-
-	server.sin_family = AF_INET;
-	server.sin_addr = addr->sin_addr;
-	server.sin_port = NFS_PORT;
-
-	/* Call sys_connect */
-	ret = socket->ops->connect (socket, (struct sockaddr *) &server,
-				    sizeof (server), file->f_flags);
-	if (ret >= 0)
-		result = 1;
-
-out_putf:
-	fput(file);
-out:
-	return result;
-}
-
-static int get_default (int value, int def_value)
-{
-    if (value)
-	return value;
-    else
-	return def_value;
-}
-
-static int sunos_nfs_mount(char *dir_name, int linux_flags, void __user *data)
-{
-	int  server_fd, err;
-	char *the_name, *mount_page;
-	struct nfs_mount_data linux_nfs_mount;
-	struct sunos_nfs_mount_args sunos_mount;
-
-	/* Ok, here comes the fun part: Linux's nfs mount needs a
-	 * socket connection to the server, but SunOS mount does not
-	 * require this, so we use the information on the destination
-	 * address to create a socket and bind it to a reserved
-	 * port on this system
-	 */
-	if (copy_from_user(&sunos_mount, data, sizeof(sunos_mount)))
-		return -EFAULT;
-
-	server_fd = sys_socket (AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-	if (server_fd < 0)
-		return -ENXIO;
-
-	if (copy_from_user(&linux_nfs_mount.addr,sunos_mount.addr,
-				sizeof(*sunos_mount.addr)) ||
-	    copy_from_user(&linux_nfs_mount.root,sunos_mount.fh,
-				sizeof(*sunos_mount.fh))) {
-		sys_close (server_fd);
-		return -EFAULT;
-	}
-
-	if (!sunos_nfs_get_server_fd (server_fd, &linux_nfs_mount.addr)){
-		sys_close (server_fd);
-		return -ENXIO;
-	}
-
-	/* Now, bind it to a locally reserved port */
-	linux_nfs_mount.version  = NFS_MOUNT_VERSION;
-	linux_nfs_mount.flags    = sunos_mount.flags;
-	linux_nfs_mount.fd       = server_fd;
-	
-	linux_nfs_mount.rsize    = get_default (sunos_mount.rsize, 8192);
-	linux_nfs_mount.wsize    = get_default (sunos_mount.wsize, 8192);
-	linux_nfs_mount.timeo    = get_default (sunos_mount.timeo, 10);
-	linux_nfs_mount.retrans  = sunos_mount.retrans;
-	
-	linux_nfs_mount.acregmin = sunos_mount.acregmin;
-	linux_nfs_mount.acregmax = sunos_mount.acregmax;
-	linux_nfs_mount.acdirmin = sunos_mount.acdirmin;
-	linux_nfs_mount.acdirmax = sunos_mount.acdirmax;
-
-	the_name = getname(sunos_mount.hostname);
-	if (IS_ERR(the_name))
-		return PTR_ERR(the_name);
-
-	strlcpy(linux_nfs_mount.hostname, the_name,
-		sizeof(linux_nfs_mount.hostname));
-	putname (the_name);
-	
-	mount_page = (char *) get_zeroed_page(GFP_KERNEL);
-	if (!mount_page)
-		return -ENOMEM;
-
-	memcpy(mount_page, &linux_nfs_mount, sizeof(linux_nfs_mount));
-
-	err = do_mount("", dir_name, "nfs", linux_flags, mount_page);
-
-	free_page((unsigned long) mount_page);
-	return err;
-}
-
-asmlinkage int
-sunos_mount(char __user *type, char __user *dir, int flags, void __user *data)
-{
-	int linux_flags = 0;
-	int ret = -EINVAL;
-	char *dev_fname = NULL;
-	char *dir_page, *type_page;
-
-	if (!capable (CAP_SYS_ADMIN))
-		return -EPERM;
-		
-	lock_kernel();
-	/* We don't handle the integer fs type */
-	if ((flags & SMNT_NEWTYPE) == 0)
-		goto out;
-
-	/* Do not allow for those flags we don't support */
-	if (flags & (SMNT_GRPID|SMNT_NOSUB|SMNT_MULTI|SMNT_SYS5))
-		goto out;
-
-	if (flags & SMNT_REMOUNT)
-		linux_flags |= MS_REMOUNT;
-	if (flags & SMNT_RDONLY)
-		linux_flags |= MS_RDONLY;
-	if (flags & SMNT_NOSUID)
-		linux_flags |= MS_NOSUID;
-
-	dir_page = getname(dir);
-	ret = PTR_ERR(dir_page);
-	if (IS_ERR(dir_page))
-		goto out;
-
-	type_page = getname(type);
-	ret = PTR_ERR(type_page);
-	if (IS_ERR(type_page))
-		goto out1;
-
-	if (strcmp(type_page, "ext2") == 0) {
-		dev_fname = getname(data);
-	} else if (strcmp(type_page, "iso9660") == 0) {
-		dev_fname = getname(data);
-	} else if (strcmp(type_page, "minix") == 0) {
-		dev_fname = getname(data);
-	} else if (strcmp(type_page, "nfs") == 0) {
-		ret = sunos_nfs_mount (dir_page, flags, data);
-		goto out2;
-        } else if (strcmp(type_page, "ufs") == 0) {
-		printk("Warning: UFS filesystem mounts unsupported.\n");
-		ret = -ENODEV;
-		goto out2;
-	} else if (strcmp(type_page, "proc")) {
-		ret = -ENODEV;
-		goto out2;
-	}
-	ret = PTR_ERR(dev_fname);
-	if (IS_ERR(dev_fname))
-		goto out2;
-	ret = do_mount(dev_fname, dir_page, type_page, linux_flags, NULL);
-	if (dev_fname)
-		putname(dev_fname);
-out2:
-	putname(type_page);
-out1:
-	putname(dir_page);
-out:
-	unlock_kernel();
-	return ret;
-}
-
-
-asmlinkage int sunos_setpgrp(pid_t pid, pid_t pgid)
-{
-	int ret;
-
-	/* So stupid... */
-	if ((!pid || pid == current->pid) &&
-	    !pgid) {
-		sys_setsid();
-		ret = 0;
-	} else {
-		ret = sys_setpgid(pid, pgid);
-	}
-	return ret;
-}
-
-/* So stupid... */
-asmlinkage int sunos_wait4(pid_t pid, unsigned int __user *stat_addr,
-			   int options, struct rusage __user*ru)
-{
-	int ret;
-
-	ret = sys_wait4((pid ? pid : -1), stat_addr, options, ru);
-	return ret;
-}
-
-asmlinkage int sunos_killpg(int pgrp, int sig)
-{
-	int ret;
-
-	rcu_read_lock();
-	ret = -EINVAL;
-	if (pgrp > 0)
-		ret = kill_pgrp(find_vpid(pgrp), sig, 0);
-	rcu_read_unlock();
-
-	return ret;
-}
-
-asmlinkage int sunos_audit(void)
-{
-	lock_kernel();
-	printk ("sys_audit\n");
-	unlock_kernel();
-	return -1;
-}
-
-asmlinkage unsigned long sunos_gethostid(void)
-{
-	unsigned long ret;
-
-	lock_kernel();
-	ret = ((unsigned long)idprom->id_machtype << 24) |
-		(unsigned long)idprom->id_sernum;
-	unlock_kernel();
-	return ret;
-}
-
-/* sysconf options, for SunOS compatibility */
-#define   _SC_ARG_MAX             1
-#define   _SC_CHILD_MAX           2
-#define   _SC_CLK_TCK             3
-#define   _SC_NGROUPS_MAX         4
-#define   _SC_OPEN_MAX            5
-#define   _SC_JOB_CONTROL         6
-#define   _SC_SAVED_IDS           7
-#define   _SC_VERSION             8
-
-asmlinkage long sunos_sysconf (int name)
-{
-	long ret;
-
-	switch (name){
-	case _SC_ARG_MAX:
-		ret = ARG_MAX;
-		break;
-	case _SC_CHILD_MAX:
-		ret = current->signal->rlim[RLIMIT_NPROC].rlim_cur;
-		break;
-	case _SC_CLK_TCK:
-		ret = HZ;
-		break;
-	case _SC_NGROUPS_MAX:
-		ret = NGROUPS_MAX;
-		break;
-	case _SC_OPEN_MAX:
-		ret = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		break;
-	case _SC_JOB_CONTROL:
-		ret = 1;	/* yes, we do support job control */
-		break;
-	case _SC_SAVED_IDS:
-		ret = 1;	/* yes, we do support saved uids  */
-		break;
-	case _SC_VERSION:
-		/* mhm, POSIX_VERSION is in /usr/include/unistd.h
-		 * should it go on /usr/include/linux?
-		 */
-		ret = 199009L; 
-		break;
-	default:
-		ret = -1;
-		break;
-	};
-	return ret;
-}
-
-asmlinkage int sunos_semsys(int op, unsigned long arg1, unsigned long arg2,
-			    unsigned long arg3, void *ptr)
-{
-	union semun arg4;
-	int ret;
-
-	switch (op) {
-	case 0:
-		/* Most arguments match on a 1:1 basis but cmd doesn't */
-		switch(arg3) {
-		case 4:
-			arg3=GETPID; break;
-		case 5:
-			arg3=GETVAL; break;
-		case 6:
-			arg3=GETALL; break;
-		case 3:
-			arg3=GETNCNT; break;
-		case 7:
-			arg3=GETZCNT; break;
-		case 8:
-			arg3=SETVAL; break;
-		case 9:
-			arg3=SETALL; break;
-		}
-		/* sys_semctl(): */
-		/* value to modify semaphore to */
-		arg4.__pad = (void __user *) ptr;
-		ret = sys_semctl((int)arg1, (int)arg2, (int)arg3, arg4 );
-		break;
-	case 1:
-		/* sys_semget(): */
-		ret = sys_semget((key_t)arg1, (int)arg2, (int)arg3);
-		break;
-	case 2:
-		/* sys_semop(): */
-		ret = sys_semop((int)arg1, (struct sembuf __user *)arg2, (unsigned)arg3);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	};
-	return ret;
-}
-
-asmlinkage int sunos_msgsys(int op, unsigned long arg1, unsigned long arg2,
-			    unsigned long arg3, unsigned long arg4)
-{
-	struct sparc_stackf *sp;
-	unsigned long arg5;
-	int rval;
-
-	switch(op) {
-	case 0:
-		rval = sys_msgget((key_t)arg1, (int)arg2);
-		break;
-	case 1:
-		rval = sys_msgctl((int)arg1, (int)arg2,
-				  (struct msqid_ds __user *)arg3);
-		break;
-	case 2:
-		lock_kernel();
-		sp = (struct sparc_stackf *)current->thread.kregs->u_regs[UREG_FP];
-		arg5 = sp->xxargs[0];
-		unlock_kernel();
-		rval = sys_msgrcv((int)arg1, (struct msgbuf __user *)arg2,
-				  (size_t)arg3, (long)arg4, (int)arg5);
-		break;
-	case 3:
-		rval = sys_msgsnd((int)arg1, (struct msgbuf __user *)arg2,
-				  (size_t)arg3, (int)arg4);
-		break;
-	default:
-		rval = -EINVAL;
-		break;
-	}
-	return rval;
-}
-
-asmlinkage int sunos_shmsys(int op, unsigned long arg1, unsigned long arg2,
-			    unsigned long arg3)
-{
-	unsigned long raddr;
-	int rval;
-
-	switch(op) {
-	case 0:
-		/* do_shmat(): attach a shared memory area */
-		rval = do_shmat((int)arg1,(char __user *)arg2,(int)arg3,&raddr);
-		if (!rval)
-			rval = (int) raddr;
-		break;
-	case 1:
-		/* sys_shmctl(): modify shared memory area attr. */
-		rval = sys_shmctl((int)arg1,(int)arg2,(struct shmid_ds __user *)arg3);
-		break;
-	case 2:
-		/* sys_shmdt(): detach a shared memory area */
-		rval = sys_shmdt((char __user *)arg1);
-		break;
-	case 3:
-		/* sys_shmget(): get a shared memory area */
-		rval = sys_shmget((key_t)arg1,(int)arg2,(int)arg3);
-		break;
-	default:
-		rval = -EINVAL;
-		break;
-	};
-	return rval;
-}
-
-#define SUNOS_EWOULDBLOCK 35
-
-/* see the sunos man page read(2v) for an explanation
-   of this garbage. We use O_NDELAY to mark
-   file descriptors that have been set non-blocking 
-   using 4.2BSD style calls. (tridge) */
-
-static inline int check_nonblock(int ret, int fd)
-{
-	if (ret == -EAGAIN) {
-		struct file * file = fget(fd);
-		if (file) {
-			if (file->f_flags & O_NDELAY)
-				ret = -SUNOS_EWOULDBLOCK;
-			fput(file);
-		}
-	}
-	return ret;
-}
-
-asmlinkage int sunos_read(unsigned int fd, char __user *buf, int count)
-{
-	int ret;
-
-	ret = check_nonblock(sys_read(fd,buf,count),fd);
-	return ret;
-}
-
-asmlinkage int sunos_readv(unsigned long fd, const struct iovec __user *vector,
-			   long count)
-{
-	int ret;
-
-	ret = check_nonblock(sys_readv(fd,vector,count),fd);
-	return ret;
-}
-
-asmlinkage int sunos_write(unsigned int fd, char __user *buf, int count)
-{
-	int ret;
-
-	ret = check_nonblock(sys_write(fd,buf,count),fd);
-	return ret;
-}
-
-asmlinkage int sunos_writev(unsigned long fd,
-			    const struct iovec __user *vector, long count)
-{
-	int ret;
-
-	ret = check_nonblock(sys_writev(fd,vector,count),fd);
-	return ret;
-}
-
-asmlinkage int sunos_recv(int fd, void __user *ubuf, int size, unsigned flags)
-{
-	int ret;
-
-	ret = check_nonblock(sys_recv(fd,ubuf,size,flags),fd);
-	return ret;
-}
-
-asmlinkage int sunos_send(int fd, void __user *buff, int len, unsigned flags)
-{
-	int ret;
-
-	ret = check_nonblock(sys_send(fd,buff,len,flags),fd);
-	return ret;
-}
-
-asmlinkage int sunos_accept(int fd, struct sockaddr __user *sa,
-			    int __user *addrlen)
-{
-	int ret;
-
-	while (1) {
-		ret = check_nonblock(sys_accept(fd,sa,addrlen),fd);	
-		if (ret != -ENETUNREACH && ret != -EHOSTUNREACH)
-			break;
-	}
-
-	return ret;
-}
-
-#define SUNOS_SV_INTERRUPT 2
-
-asmlinkage int
-sunos_sigaction(int sig, const struct old_sigaction __user *act,
-		struct old_sigaction __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
-			return -EFAULT;
-		__get_user(mask, &act->sa_mask);
-		new_ka.sa.sa_restorer = NULL;
-		new_ka.ka_restorer = NULL;
-		siginitset(&new_ka.sa.sa_mask, mask);
-		new_ka.sa.sa_flags ^= SUNOS_SV_INTERRUPT;
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		/* In the clone() case we could copy half consistent
-		 * state to the user, however this could sleep and
-		 * deadlock us if we held the signal lock on SMP.  So for
-		 * now I take the easy way out and do no locking.
-		 * But then again we don't support SunOS lwp's anyways ;-)
-		 */
-		old_ka.sa.sa_flags ^= SUNOS_SV_INTERRUPT;
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
-			 return -EFAULT;
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-
-asmlinkage int sunos_setsockopt(int fd, int level, int optname,
-				char __user *optval, int optlen)
-{
-	int tr_opt = optname;
-	int ret;
-
-	if (level == SOL_IP) {
-		/* Multicast socketopts (ttl, membership) */
-		if (tr_opt >=2 && tr_opt <= 6)
-			tr_opt += 30;
-	}
-	ret = sys_setsockopt(fd, level, tr_opt, optval, optlen);
-	return ret;
-}
-
-asmlinkage int sunos_getsockopt(int fd, int level, int optname,
-				char __user *optval, int __user *optlen)
-{
-	int tr_opt = optname;
-	int ret;
-
-	if (level == SOL_IP) {
-		/* Multicast socketopts (ttl, membership) */
-		if (tr_opt >=2 && tr_opt <= 6)
-			tr_opt += 30;
-	}
-	ret = sys_getsockopt(fd, level, tr_opt, optval, optlen);
-	return ret;
-}
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 9064485dc40b..5a7c4c8345c3 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -81,124 +81,3 @@ sys_call_table:
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime
-
-#ifdef CONFIG_SUNOS_EMUL
-	/* Now the SunOS syscall table. */
-
-	.align 4
-	.globl sunos_sys_table
-sunos_sys_table:
-/*0*/	.long sunos_indir, sys_exit, sys_fork
-	.long sunos_read, sunos_write, sys_open
-	.long sys_close, sunos_wait4, sys_creat
-	.long sys_link, sys_unlink, sunos_execv
-	.long sys_chdir, sunos_nosys, sys_mknod
-	.long sys_chmod, sys_lchown16, sunos_brk
-	.long sunos_nosys, sys_lseek, sunos_getpid
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_getuid, sunos_nosys, sys_ptrace
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sys_access, sunos_nosys, sunos_nosys
-	.long sys_sync, sys_kill, sys_newstat
-	.long sunos_nosys, sys_newlstat, sys_dup
-	.long sys_pipe, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_getgid
-	.long sunos_nosys, sunos_nosys
-/*50*/	.long sunos_nosys, sys_acct, sunos_nosys
-	.long sunos_mctl, sunos_ioctl, sys_reboot
-	.long sunos_nosys, sys_symlink, sys_readlink
-	.long sys_execve, sys_umask, sys_chroot
-	.long sys_newfstat, sunos_nosys, sys_getpagesize
-	.long sys_msync, sys_vfork, sunos_nosys
-	.long sunos_nosys, sunos_sbrk, sunos_sstk
-	.long sunos_mmap, sunos_vadvise, sys_munmap
-	.long sys_mprotect, sys_madvise, sys_vhangup
-	.long sunos_nosys, sys_mincore, sys_getgroups16
-	.long sys_setgroups16, sys_getpgrp, sunos_setpgrp
-	.long sys_setitimer, sunos_nosys, sys_swapon
-	.long sys_getitimer, sys_gethostname, sys_sethostname
-	.long sunos_getdtablesize, sys_dup2, sunos_nop
-	.long sys_fcntl, sunos_select, sunos_nop
-	.long sys_fsync, sys_setpriority, sys_socket
-	.long sys_connect, sunos_accept
-/*100*/	.long sys_getpriority, sunos_send, sunos_recv
-	.long sunos_nosys, sys_bind, sunos_setsockopt
-	.long sys_listen, sunos_nosys, sunos_sigaction
-	.long sunos_sigblock, sunos_sigsetmask, sys_sigpause
-	.long sys_sigstack, sys_recvmsg, sys_sendmsg
-	.long sunos_nosys, sys_gettimeofday, sys_getrusage
-	.long sunos_getsockopt, sunos_nosys, sunos_readv
-	.long sunos_writev, sys_settimeofday, sys_fchown16
-	.long sys_fchmod, sys_recvfrom, sys_setreuid16
-	.long sys_setregid16, sys_rename, sys_truncate
-	.long sys_ftruncate, sys_flock, sunos_nosys
-	.long sys_sendto, sys_shutdown, sys_socketpair
-	.long sys_mkdir, sys_rmdir, sys_utimes
-	.long sys_sigreturn, sunos_nosys, sys_getpeername
-	.long sunos_gethostid, sunos_nosys, sys_getrlimit
-	.long sys_setrlimit, sunos_killpg, sunos_nosys
-	.long sunos_nosys, sunos_nosys
-/*150*/	.long sys_getsockname, sunos_nosys, sunos_nosys
-	.long sys_poll, sunos_nosys, sunos_nosys
-	.long sunos_getdirentries, sys_statfs, sys_fstatfs
-	.long sys_oldumount, sunos_nosys, sunos_nosys
-	.long sys_getdomainname, sys_setdomainname
-	.long sunos_nosys, sys_quotactl, sunos_nosys
-	.long sunos_mount, sys_ustat, sunos_semsys
-	.long sunos_msgsys, sunos_shmsys, sunos_audit
-	.long sunos_nosys, sunos_getdents, sys_setsid
-	.long sys_fchdir, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sys_sigpending, sunos_nosys
-	.long sys_setpgid, sunos_pathconf, sunos_fpathconf
-	.long sunos_sysconf, sunos_uname, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-/*200*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys
-/*250*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-/*260*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-/*270*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-/*280*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-/*290*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-/*300*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-/*310*/	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys, sunos_nosys, sunos_nosys
-	.long sunos_nosys
-
-#endif
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index cfaf22c05bc4..53caacbb3982 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -105,7 +105,7 @@ __volatile__ unsigned int *master_l10_limit;
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-irqreturn_t timer_interrupt(int irq, void *dev_id)
+static irqreturn_t timer_interrupt(int dummy, void *dev_id)
 {
 	/* last time the cmos clock got updated */
 	static long last_rtc_update;
diff --git a/arch/sparc/kernel/una_asm.S b/arch/sparc/kernel/una_asm.S
new file mode 100644
index 000000000000..8cc03458eb7e
--- /dev/null
+++ b/arch/sparc/kernel/una_asm.S
@@ -0,0 +1,153 @@
+/* una_asm.S: Kernel unaligned trap assembler helpers.
+ *
+ * Copyright (C) 1996,2005,2008 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#include <linux/errno.h>
+
+	.text
+
+retl_efault:
+	retl
+	 mov	-EFAULT, %o0
+
+	/* int __do_int_store(unsigned long *dst_addr, int size,
+	 *                    unsigned long *src_val)
+	 *
+	 * %o0 = dest_addr
+	 * %o1 = size
+	 * %o2 = src_val
+	 *
+	 * Return '0' on success, -EFAULT on failure.
+	 */
+	.globl	__do_int_store
+__do_int_store:
+	ld	[%o2], %g1
+	cmp	%1, 2
+	be	2f
+	 cmp	%1, 4
+	be	1f
+	 srl	%g1, 24, %g2
+	srl	%g1, 16, %g7
+4:	stb	%g2, [%o0]
+	srl	%g1, 8, %g2
+5:	stb	%g7, [%o0 + 1]
+	ld	[%o2 + 4], %g7
+6:	stb	%g2, [%o0 + 2]
+	srl	%g7, 24, %g2
+7:	stb	%g1, [%o0 + 3]
+	srl	%g7, 16, %g1
+8:	stb	%g2, [%o0 + 4]
+	srl	%g7, 8, %g2
+9:	stb	%g1, [%o0 + 5]
+10:	stb	%g2, [%o0 + 6]
+	b	0f
+11:	 stb	%g7, [%o0 + 7]
+1:	srl	%g1, 16, %g7
+12:	stb	%g2, [%o0]
+	srl	%g1, 8, %g2
+13:	stb	%g7, [%o0 + 1]
+14:	stb	%g2, [%o0 + 2]
+	b	0f
+15:	 stb	%g1, [%o0 + 3]
+2:	srl	%g1, 8, %g2
+16:	stb	%g2, [%o0]
+17:	stb	%g1, [%o0 + 1]
+0:	retl
+	 mov	0, %o0
+
+	.section __ex_table,#alloc
+	.word	4b, retl_efault
+	.word	5b, retl_efault
+	.word	6b, retl_efault
+	.word	7b, retl_efault
+	.word	8b, retl_efault
+	.word	9b, retl_efault
+	.word	10b, retl_efault
+	.word	11b, retl_efault
+	.word	12b, retl_efault
+	.word	13b, retl_efault
+	.word	14b, retl_efault
+	.word	15b, retl_efault
+	.word	16b, retl_efault
+	.word	17b, retl_efault
+	.previous
+
+	/* int do_int_load(unsigned long *dest_reg, int size,
+	 *                 unsigned long *saddr, int is_signed)
+	 *
+	 * %o0 = dest_reg
+	 * %o1 = size
+	 * %o2 = saddr
+	 * %o3 = is_signed
+	 *
+	 * Return '0' on success, -EFAULT on failure.
+	 */
+	.globl	do_int_load
+do_int_load:
+	cmp	%o1, 8
+	be	9f
+	 cmp	%o1, 4
+	be	6f
+4:	 ldub	[%o2], %g1
+5:	ldub	[%o2 + 1], %g2
+	sll	%g1, 8, %g1
+	tst	%o3
+	be	3f
+	 or	%g1, %g2, %g1
+	sll	%g1, 16, %g1
+	sra	%g1, 16, %g1
+3:	b	0f
+	 st	%g1, [%o0]
+6:	ldub	[%o2 + 1], %g2
+	sll	%g1, 24, %g1
+7:	ldub	[%o2 + 2], %g7
+	sll	%g2, 16, %g2
+8:	ldub	[%o2 + 3], %g3
+	sll	%g7, 8, %g7
+	or	%g3, %g2, %g3
+	or	%g7, %g3, %g7
+	or	%g1, %g7, %g1
+	b	0f
+	 st	%g1, [%o0]
+9:	ldub	[%o2], %g1
+10:	ldub	[%o2 + 1], %g2
+	sll	%g1, 24, %g1
+11:	ldub	[%o2 + 2], %g7
+	sll	%g2, 16, %g2
+12:	ldub	[%o2 + 3], %g3
+	sll	%g7, 8, %g7
+	or	%g1, %g2, %g1
+	or	%g7, %g3, %g7
+	or	%g1, %g7, %g7
+13:	ldub	[%o2 + 4], %g1
+	st	%g7, [%o0]
+14:	ldub	[%o2 + 5], %g2
+	sll	%g1, 24, %g1
+15:	ldub	[%o2 + 6], %g7
+	sll	%g2, 16, %g2
+16:	ldub	[%o2 + 7], %g3
+	sll	%g7, 8, %g7
+	or	%g1, %g2, %g1
+	or	%g7, %g3, %g7
+	or	%g1, %g7, %g7
+	st	%g7, [%o0 + 4]
+0:	retl
+	 mov	0, %o0
+
+	.section __ex_table,#alloc
+	.word	4b, retl_efault
+	.word	5b, retl_efault
+	.word	6b, retl_efault
+	.word	7b, retl_efault
+	.word	8b, retl_efault
+	.word	9b, retl_efault
+	.word	10b, retl_efault
+	.word	11b, retl_efault
+	.word	12b, retl_efault
+	.word	13b, retl_efault
+	.word	14b, retl_efault
+	.word	15b, retl_efault
+	.word	16b, retl_efault
+	.previous
diff --git a/arch/sparc/kernel/unaligned.c b/arch/sparc/kernel/unaligned.c
index a6330fbc9dd9..33857be16661 100644
--- a/arch/sparc/kernel/unaligned.c
+++ b/arch/sparc/kernel/unaligned.c
@@ -175,157 +175,31 @@ static void unaligned_panic(char *str)
 	panic(str);
 }
 
-#define do_integer_load(dest_reg, size, saddr, is_signed, errh) ({		\
-__asm__ __volatile__ (								\
-	"cmp	%1, 8\n\t"							\
-	"be	9f\n\t"								\
-	" cmp	%1, 4\n\t"							\
-	"be	6f\n"								\
-"4:\t"	" ldub	[%2], %%l1\n"							\
-"5:\t"	"ldub	[%2 + 1], %%l2\n\t"						\
-	"sll	%%l1, 8, %%l1\n\t"						\
-	"tst	%3\n\t"								\
-	"be	3f\n\t"								\
-	" add	%%l1, %%l2, %%l1\n\t"						\
-	"sll	%%l1, 16, %%l1\n\t"						\
-	"sra	%%l1, 16, %%l1\n"						\
-"3:\t"	"b	0f\n\t"								\
-	" st	%%l1, [%0]\n"							\
-"6:\t"	"ldub	[%2 + 1], %%l2\n\t"						\
-	"sll	%%l1, 24, %%l1\n"						\
-"7:\t"	"ldub	[%2 + 2], %%g7\n\t"						\
-	"sll	%%l2, 16, %%l2\n"						\
-"8:\t"	"ldub	[%2 + 3], %%g1\n\t"						\
-	"sll	%%g7, 8, %%g7\n\t"						\
-	"or	%%l1, %%l2, %%l1\n\t"						\
-	"or	%%g7, %%g1, %%g7\n\t"						\
-	"or	%%l1, %%g7, %%l1\n\t"						\
-	"b	0f\n\t"								\
-	" st	%%l1, [%0]\n"							\
-"9:\t"	"ldub	[%2], %%l1\n"							\
-"10:\t"	"ldub	[%2 + 1], %%l2\n\t"						\
-	"sll	%%l1, 24, %%l1\n"						\
-"11:\t"	"ldub	[%2 + 2], %%g7\n\t"						\
-	"sll	%%l2, 16, %%l2\n"						\
-"12:\t"	"ldub	[%2 + 3], %%g1\n\t"						\
-	"sll	%%g7, 8, %%g7\n\t"						\
-	"or	%%l1, %%l2, %%l1\n\t"						\
-	"or	%%g7, %%g1, %%g7\n\t"						\
-	"or	%%l1, %%g7, %%g7\n"						\
-"13:\t"	"ldub	[%2 + 4], %%l1\n\t"						\
-	"st	%%g7, [%0]\n"							\
-"14:\t"	"ldub	[%2 + 5], %%l2\n\t"						\
-	"sll	%%l1, 24, %%l1\n"						\
-"15:\t"	"ldub	[%2 + 6], %%g7\n\t"						\
-	"sll	%%l2, 16, %%l2\n"						\
-"16:\t"	"ldub	[%2 + 7], %%g1\n\t"						\
-	"sll	%%g7, 8, %%g7\n\t"						\
-	"or	%%l1, %%l2, %%l1\n\t"						\
-	"or	%%g7, %%g1, %%g7\n\t"						\
-	"or	%%l1, %%g7, %%g7\n\t"						\
-	"st	%%g7, [%0 + 4]\n"						\
-"0:\n\n\t"									\
-	".section __ex_table,#alloc\n\t"					\
-	".word	4b, " #errh "\n\t"						\
-	".word	5b, " #errh "\n\t"						\
-	".word	6b, " #errh "\n\t"						\
-	".word	7b, " #errh "\n\t"						\
-	".word	8b, " #errh "\n\t"						\
-	".word	9b, " #errh "\n\t"						\
-	".word	10b, " #errh "\n\t"						\
-	".word	11b, " #errh "\n\t"						\
-	".word	12b, " #errh "\n\t"						\
-	".word	13b, " #errh "\n\t"						\
-	".word	14b, " #errh "\n\t"						\
-	".word	15b, " #errh "\n\t"						\
-	".word	16b, " #errh "\n\n\t"						\
-	".previous\n\t"								\
-	: : "r" (dest_reg), "r" (size), "r" (saddr), "r" (is_signed)		\
-	: "l1", "l2", "g7", "g1", "cc");					\
-})
-	
-#define store_common(dst_addr, size, src_val, errh) ({				\
-__asm__ __volatile__ (								\
-	"ld	[%2], %%l1\n"							\
-	"cmp	%1, 2\n\t"							\
-	"be	2f\n\t"								\
-	" cmp	%1, 4\n\t"							\
-	"be	1f\n\t"								\
-	" srl	%%l1, 24, %%l2\n\t"						\
-	"srl	%%l1, 16, %%g7\n"						\
-"4:\t"	"stb	%%l2, [%0]\n\t"							\
-	"srl	%%l1, 8, %%l2\n"						\
-"5:\t"	"stb	%%g7, [%0 + 1]\n\t"						\
-	"ld	[%2 + 4], %%g7\n"						\
-"6:\t"	"stb	%%l2, [%0 + 2]\n\t"						\
-	"srl	%%g7, 24, %%l2\n"						\
-"7:\t"	"stb	%%l1, [%0 + 3]\n\t"						\
-	"srl	%%g7, 16, %%l1\n"						\
-"8:\t"	"stb	%%l2, [%0 + 4]\n\t"						\
-	"srl	%%g7, 8, %%l2\n"						\
-"9:\t"	"stb	%%l1, [%0 + 5]\n"						\
-"10:\t"	"stb	%%l2, [%0 + 6]\n\t"						\
-	"b	0f\n"								\
-"11:\t"	" stb	%%g7, [%0 + 7]\n"						\
-"1:\t"	"srl	%%l1, 16, %%g7\n"						\
-"12:\t"	"stb	%%l2, [%0]\n\t"							\
-	"srl	%%l1, 8, %%l2\n"						\
-"13:\t"	"stb	%%g7, [%0 + 1]\n"						\
-"14:\t"	"stb	%%l2, [%0 + 2]\n\t"						\
-	"b	0f\n"								\
-"15:\t"	" stb	%%l1, [%0 + 3]\n"						\
-"2:\t"	"srl	%%l1, 8, %%l2\n"						\
-"16:\t"	"stb	%%l2, [%0]\n"							\
-"17:\t"	"stb	%%l1, [%0 + 1]\n"						\
-"0:\n\n\t"									\
-	".section __ex_table,#alloc\n\t"					\
-	".word	4b, " #errh "\n\t"						\
-	".word	5b, " #errh "\n\t"						\
-	".word	6b, " #errh "\n\t"						\
-	".word	7b, " #errh "\n\t"						\
-	".word	8b, " #errh "\n\t"						\
-	".word	9b, " #errh "\n\t"						\
-	".word	10b, " #errh "\n\t"						\
-	".word	11b, " #errh "\n\t"						\
-	".word	12b, " #errh "\n\t"						\
-	".word	13b, " #errh "\n\t"						\
-	".word	14b, " #errh "\n\t"						\
-	".word	15b, " #errh "\n\t"						\
-	".word	16b, " #errh "\n\t"						\
-	".word	17b, " #errh "\n\n\t"						\
-	".previous\n\t"								\
-	: : "r" (dst_addr), "r" (size), "r" (src_val)				\
-	: "l1", "l2", "g7", "g1", "cc");					\
-})
-
-#define do_integer_store(reg_num, size, dst_addr, regs, errh) ({		\
-	unsigned long *src_val;							\
-	static unsigned long zero[2] = { 0, };					\
-										\
-	if (reg_num) src_val = fetch_reg_addr(reg_num, regs);			\
-	else {									\
-		src_val = &zero[0];						\
-		if (size == 8)							\
-			zero[1] = fetch_reg(1, regs);				\
-	}									\
-	store_common(dst_addr, size, src_val, errh);				\
-})
+/* una_asm.S */
+extern int do_int_load(unsigned long *dest_reg, int size,
+		       unsigned long *saddr, int is_signed);
+extern int __do_int_store(unsigned long *dst_addr, int size,
+			  unsigned long *src_val);
+
+static int do_int_store(int reg_num, int size, unsigned long *dst_addr,
+			struct pt_regs *regs)
+{
+	unsigned long zero[2] = { 0, 0 };
+	unsigned long *src_val;
+
+	if (reg_num)
+		src_val = fetch_reg_addr(reg_num, regs);
+	else {
+		src_val = &zero[0];
+		if (size == 8)
+			zero[1] = fetch_reg(1, regs);
+	}
+	return __do_int_store(dst_addr, size, src_val);
+}
 
 extern void smp_capture(void);
 extern void smp_release(void);
 
-#define do_atomic(srcdest_reg, mem, errh) ({					\
-	unsigned long flags, tmp;						\
-										\
-	smp_capture();								\
-	local_irq_save(flags);							\
-	tmp = *srcdest_reg;							\
-	do_integer_load(srcdest_reg, 4, mem, 0, errh);				\
-	store_common(mem, 4, &tmp, errh);					\
-	local_irq_restore(flags);						\
-	smp_release();								\
-})
-
 static inline void advance(struct pt_regs *regs)
 {
 	regs->pc   = regs->npc;
@@ -342,9 +216,7 @@ static inline int ok_for_kernel(unsigned int insn)
 	return !floating_point_load_or_store_p(insn);
 }
 
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("kernel_mna_trap_fault");
-
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+static void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
 {
 	unsigned long g2 = regs->u_regs [UREG_G2];
 	unsigned long fixup = search_extables_range(regs->pc, &g2);
@@ -379,48 +251,34 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 		printk("Unsupported unaligned load/store trap for kernel at <%08lx>.\n",
 		       regs->pc);
 		unaligned_panic("Wheee. Kernel does fpu/atomic unaligned load/store.");
-
-		__asm__ __volatile__ ("\n"
-"kernel_unaligned_trap_fault:\n\t"
-		"mov	%0, %%o0\n\t"
-		"call	kernel_mna_trap_fault\n\t"
-		" mov	%1, %%o1\n\t"
-		:
-		: "r" (regs), "r" (insn)
-		: "o0", "o1", "o2", "o3", "o4", "o5", "o7",
-		  "g1", "g2", "g3", "g4", "g5", "g7", "cc");
 	} else {
 		unsigned long addr = compute_effective_address(regs, insn);
+		int err;
 
 #ifdef DEBUG_MNA
 		printk("KMNA: pc=%08lx [dir=%s addr=%08lx size=%d] retpc[%08lx]\n",
 		       regs->pc, dirstrings[dir], addr, size, regs->u_regs[UREG_RETPC]);
 #endif
-		switch(dir) {
+		switch (dir) {
 		case load:
-			do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
-					size, (unsigned long *) addr,
-					decode_signedness(insn),
-					kernel_unaligned_trap_fault);
+			err = do_int_load(fetch_reg_addr(((insn>>25)&0x1f),
+							 regs),
+					  size, (unsigned long *) addr,
+					  decode_signedness(insn));
 			break;
 
 		case store:
-			do_integer_store(((insn>>25)&0x1f), size,
-					 (unsigned long *) addr, regs,
-					 kernel_unaligned_trap_fault);
+			err = do_int_store(((insn>>25)&0x1f), size,
+					   (unsigned long *) addr, regs);
 			break;
-#if 0 /* unsupported */
-		case both:
-			do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
-				  (unsigned long *) addr,
-				  kernel_unaligned_trap_fault);
-			break;
-#endif
 		default:
 			panic("Impossible kernel unaligned trap.");
 			/* Not reached... */
 		}
-		advance(regs);
+		if (err)
+			kernel_mna_trap_fault(regs, insn);
+		else
+			advance(regs);
 	}
 }
 
@@ -459,9 +317,7 @@ static inline int ok_for_user(struct pt_regs *regs, unsigned int insn,
 	return 0;
 }
 
-void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("user_mna_trap_fault");
-
-void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+static void user_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
 {
 	siginfo_t info;
 
@@ -485,7 +341,7 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 	if(!ok_for_user(regs, insn, dir)) {
 		goto kill_user;
 	} else {
-		int size = decode_access_size(insn);
+		int err, size = decode_access_size(insn);
 		unsigned long addr;
 
 		if(floating_point_load_or_store_p(insn)) {
@@ -496,48 +352,34 @@ asmlinkage void user_unaligned_trap(struct pt_regs *regs, unsigned int insn)
 		addr = compute_effective_address(regs, insn);
 		switch(dir) {
 		case load:
-			do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
-					size, (unsigned long *) addr,
-					decode_signedness(insn),
-					user_unaligned_trap_fault);
+			err = do_int_load(fetch_reg_addr(((insn>>25)&0x1f),
+							 regs),
+					  size, (unsigned long *) addr,
+					  decode_signedness(insn));
 			break;
 
 		case store:
-			do_integer_store(((insn>>25)&0x1f), size,
-					 (unsigned long *) addr, regs,
-					 user_unaligned_trap_fault);
+			err = do_int_store(((insn>>25)&0x1f), size,
+					   (unsigned long *) addr, regs);
 			break;
 
 		case both:
-#if 0 /* unsupported */
-			do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
-				  (unsigned long *) addr,
-				  user_unaligned_trap_fault);
-#else
 			/*
 			 * This was supported in 2.4. However, we question
 			 * the value of SWAP instruction across word boundaries.
 			 */
 			printk("Unaligned SWAP unsupported.\n");
-			goto kill_user;
-#endif
+			err = -EFAULT;
 			break;
 
 		default:
 			unaligned_panic("Impossible user unaligned trap.");
-
-			__asm__ __volatile__ ("\n"
-"user_unaligned_trap_fault:\n\t"
-			"mov	%0, %%o0\n\t"
-			"call	user_mna_trap_fault\n\t"
-			" mov	%1, %%o1\n\t"
-			:
-			: "r" (regs), "r" (insn)
-			: "o0", "o1", "o2", "o3", "o4", "o5", "o7",
-			  "g1", "g2", "g3", "g4", "g5", "g7", "cc");
 			goto out;
 		}
-		advance(regs);
+		if (err)
+			goto kill_user;
+		else
+			advance(regs);
 		goto out;
 	}
 
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 3af378ddb6ae..df3eacb5ca15 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -10,11 +10,13 @@ config SPARC
 	default y
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
+	select HAVE_KRETPROBES
 
 config SPARC64
 	bool
 	default y
 	select HAVE_IDE
+	select HAVE_LMB
 	help
 	  SPARC is a family of RISC microprocessors designed and marketed by
 	  Sun Microsystems, incorporated.  This port covers the newer 64-bit
@@ -86,9 +88,6 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 choice
 	prompt "Kernel page size"
 	default SPARC64_PAGE_SIZE_8KB
@@ -146,11 +145,6 @@ config HOTPLUG_CPU
 
 source "init/Kconfig"
 
-config SYSVIPC_COMPAT
-	bool
-	depends on COMPAT && SYSVIPC
-	default y
-
 config GENERIC_HARDIRQS
 	bool
 	default y
@@ -378,6 +372,10 @@ config SUN_OPENPROMFS
 	  To compile the /proc/openprom support as a module, choose M here: the
 	  module will be called openpromfs.  If unsure, choose M.
 
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
 config SPARC32_COMPAT
 	bool "Kernel support for Linux/Sparc 32bit binary compatibility"
 	help
@@ -390,37 +388,10 @@ config COMPAT
 	default y
 	select COMPAT_BINFMT_ELF
 
-config BINFMT_AOUT32
-	bool "Kernel support for 32-bit (ie. SunOS) a.out binaries"
-	depends on SPARC32_COMPAT && ARCH_SUPPORTS_AOUT
-	help
-	  This allows you to run 32-bit a.out format binaries on your Ultra.
-	  If you want to run SunOS binaries (see SunOS binary emulation below)
-	  or other a.out binaries, say Y. If unsure, say N.
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-config SUNOS_EMUL
-	bool "SunOS binary emulation"
-	depends on BINFMT_AOUT32
-	help
-	  This allows you to run most SunOS binaries.  If you want to do this,
-	  say Y here and place appropriate files in /usr/gnemul/sunos. See
-	  <http://www.ultralinux.org/faq.html> for more information.  If you
-	  want to run SunOS binaries on an Ultra you must also say Y to
-	  "Kernel support for 32-bit a.out binaries" above.
-
-config SOLARIS_EMUL
-	tristate "Solaris binary emulation (EXPERIMENTAL)"
-	depends on SPARC32_COMPAT && NET && EXPERIMENTAL
-	help
-	  This is experimental code which will enable you to run (many)
-	  Solaris binaries on your SPARC Linux machine.
-
-	  To compile this code as a module, choose M here: the
-	  module will be called solaris.
+config SYSVIPC_COMPAT
+	bool
+	depends on COMPAT && SYSVIPC
+	default y
 
 endmenu
 
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index f0c22f826982..9cb75c852b45 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -27,7 +27,6 @@ endif
 head-y := arch/sparc64/kernel/head.o arch/sparc64/kernel/init_task.o
 
 core-y				+= arch/sparc64/kernel/ arch/sparc64/mm/
-core-$(CONFIG_SOLARIS_EMUL)	+= arch/sparc64/solaris/
 core-y				+= arch/sparc64/math-emu/
 libs-y				+= arch/sparc64/prom/ arch/sparc64/lib/
 drivers-$(CONFIG_OPROFILE)	+= arch/sparc64/oprofile/
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 250958d1e3cb..e1835868ad36 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc1
-# Sun Feb 17 22:44:12 2008
+# Linux kernel version: 2.6.25
+# Sun Apr 20 01:33:21 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -22,7 +22,6 @@ CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_SPARC64_PAGE_SIZE_8KB=y
 # CONFIG_SPARC64_PAGE_SIZE_64KB is not set
 # CONFIG_SPARC64_PAGE_SIZE_512KB is not set
@@ -55,10 +54,13 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -98,7 +100,9 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -129,8 +133,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_SYSVIPC_COMPAT=y
 CONFIG_GENERIC_HARDIRQS=y
 
 #
@@ -180,9 +182,6 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_DEBUG is not set
 CONFIG_SUN_OPENPROMFS=m
-CONFIG_SPARC32_COMPAT=y
-CONFIG_COMPAT=y
-# CONFIG_BINFMT_AOUT32 is not set
 
 #
 # Executable file formats
@@ -190,13 +189,14 @@ CONFIG_COMPAT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
-CONFIG_SOLARIS_EMUL=y
+CONFIG_SPARC32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
 CONFIG_SCHED_SMT=y
 CONFIG_SCHED_MC=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
-# CONFIG_RCU_TRACE is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
@@ -261,8 +261,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 CONFIG_IP_DCCP=m
@@ -366,7 +368,7 @@ CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -382,7 +384,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -420,7 +421,7 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -482,6 +483,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -585,7 +587,6 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
@@ -610,6 +611,7 @@ CONFIG_NIU=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -810,6 +812,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1468,7 +1471,7 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
diff --git a/arch/sparc64/kernel/Makefile b/arch/sparc64/kernel/Makefile
index 1bf5b187de49..63c6ae0dd273 100644
--- a/arch/sparc64/kernel/Makefile
+++ b/arch/sparc64/kernel/Makefile
@@ -10,7 +10,7 @@ extra-y		:= head.o init_task.o vmlinux.lds
 obj-y		:= process.o setup.o cpu.o idprom.o \
 		   traps.o auxio.o una_asm.o sysfs.o iommu.o \
 		   irq.o ptrace.o time.o sys_sparc.o signal.o \
-		   unaligned.o central.o pci.o starfire.o semaphore.o \
+		   unaligned.o central.o pci.o starfire.o \
 		   power.o sbus.o sparc64_ksyms.o chmc.o \
 		   visemul.o prom.o of_device.o hvapi.o sstate.o mdesc.o
 
@@ -21,7 +21,6 @@ obj-$(CONFIG_PCI)	 += ebus.o isa.o pci_common.o \
 obj-$(CONFIG_PCI_MSI)	+= pci_msi.o
 obj-$(CONFIG_SMP)	 += smp.o trampoline.o hvtramp.o
 obj-$(CONFIG_SPARC32_COMPAT) += sys32.o sys_sparc32.o signal32.o
-obj-$(CONFIG_BINFMT_AOUT32) += binfmt_aout32.o
 obj-$(CONFIG_MODULES) += module.o
 obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
 obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
@@ -30,11 +29,3 @@ obj-$(CONFIG_SUN_LDOMS) += ldc.o vio.o viohs.o ds.o
 obj-$(CONFIG_AUDIT) += audit.o
 obj-$(CONFIG_AUDIT)$(CONFIG_SPARC32_COMPAT) += compat_audit.o
 obj-y += $(obj-yy)
-
-ifdef CONFIG_SUNOS_EMUL
-  obj-y += sys_sunos32.o sunos_ioctl32.o
-else
-  ifdef CONFIG_SOLARIS_EMUL
-    obj-y += sys_sunos32.o sunos_ioctl32.o
-  endif
-endif
diff --git a/arch/sparc64/kernel/binfmt_aout32.c b/arch/sparc64/kernel/binfmt_aout32.c
deleted file mode 100644
index 9877f2d7672d..000000000000
--- a/arch/sparc64/kernel/binfmt_aout32.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- *  linux/fs/binfmt_aout.c
- *
- *  Copyright (C) 1991, 1992, 1996  Linus Torvalds
- *
- *  Hacked a bit by DaveM to make it work with 32-bit SunOS
- *  binaries on the sparc64 port.
- */
-
-#include <linux/module.h>
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/a.out.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/string.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/stat.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/user.h>
-#include <linux/slab.h>
-#include <linux/binfmts.h>
-#include <linux/personality.h>
-#include <linux/init.h>
-
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/a.out-core.h>
-
-static int load_aout32_binary(struct linux_binprm *, struct pt_regs * regs);
-static int load_aout32_library(struct file*);
-static int aout32_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit);
-
-static struct linux_binfmt aout32_format = {
-	.module		= THIS_MODULE,
-	.load_binary	= load_aout32_binary,
-	.load_shlib	= load_aout32_library,
-	.core_dump	= aout32_core_dump,
-	.min_coredump	= PAGE_SIZE,
-};
-
-static void set_brk(unsigned long start, unsigned long end)
-{
-	start = PAGE_ALIGN(start);
-	end = PAGE_ALIGN(end);
-	if (end <= start)
-		return;
-	down_write(&current->mm->mmap_sem);
-	do_brk(start, end - start);
-	up_write(&current->mm->mmap_sem);
-}
-
-/*
- * These are the only things you should do on a core-file: use only these
- * macros to write out all the necessary info.
- */
-
-static int dump_write(struct file *file, const void *addr, int nr)
-{
-	return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
-}
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (void *)(addr), (nr))) \
-		goto end_coredump;
-
-#define DUMP_SEEK(offset) \
-if (file->f_op->llseek) { \
-	if (file->f_op->llseek(file,(offset),0) != (offset)) \
- 		goto end_coredump; \
-} else file->f_pos = (offset)
-
-/*
- * Routine writes a core dump image in the current directory.
- * Currently only a stub-function.
- *
- * Note that setuid/setgid files won't make a core-dump if the uid/gid
- * changed due to the set[u|g]id. It's enforced by the "current->mm->dumpable"
- * field, which also makes sure the core-dumps won't be recursive if the
- * dumping of the process results in another error..
- */
-
-static int aout32_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
-{
-	mm_segment_t fs;
-	int has_dumped = 0;
-	unsigned long dump_start, dump_size;
-	struct user dump;
-#       define START_DATA(u)    (u.u_tsize)
-#       define START_STACK(u)   ((regs->u_regs[UREG_FP]) & ~(PAGE_SIZE - 1))
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	has_dumped = 1;
-	current->flags |= PF_DUMPCORE;
-       	strncpy(dump.u_comm, current->comm, sizeof(dump.u_comm));
-	dump.signal = signr;
-	aout_dump_thread(regs, &dump);
-
-/* If the size of the dump file exceeds the rlimit, then see what would happen
-   if we wrote the stack, but not the data area.  */
-	if (dump.u_dsize + dump.u_ssize > limit)
-		dump.u_dsize = 0;
-
-/* Make sure we have enough room to write the stack and data areas. */
-	if (dump.u_ssize > limit)
-		dump.u_ssize = 0;
-
-/* make sure we actually have a data and stack area to dump */
-	set_fs(USER_DS);
-	if (!access_ok(VERIFY_READ, (void __user *) START_DATA(dump), dump.u_dsize))
-		dump.u_dsize = 0;
-	if (!access_ok(VERIFY_READ, (void __user *) START_STACK(dump), dump.u_ssize))
-		dump.u_ssize = 0;
-
-	set_fs(KERNEL_DS);
-/* struct user */
-	DUMP_WRITE(&dump,sizeof(dump));
-/* now we start writing out the user space info */
-	set_fs(USER_DS);
-/* Dump the data area */
-	if (dump.u_dsize != 0) {
-		dump_start = START_DATA(dump);
-		dump_size = dump.u_dsize;
-		DUMP_WRITE(dump_start,dump_size);
-	}
-/* Now prepare to dump the stack area */
-	if (dump.u_ssize != 0) {
-		dump_start = START_STACK(dump);
-		dump_size = dump.u_ssize;
-		DUMP_WRITE(dump_start,dump_size);
-	}
-/* Finally dump the task struct.  Not be used by gdb, but could be useful */
-	set_fs(KERNEL_DS);
-	DUMP_WRITE(current,sizeof(*current));
-end_coredump:
-	set_fs(fs);
-	return has_dumped;
-}
-
-/*
- * create_aout32_tables() parses the env- and arg-strings in new user
- * memory and creates the pointer tables from them, and puts their
- * addresses on the "stack", returning the new stack pointer value.
- */
-
-static u32 __user *create_aout32_tables(char __user *p, struct linux_binprm *bprm)
-{
-	u32 __user *argv;
-	u32 __user *envp;
-	u32 __user *sp;
-	int argc = bprm->argc;
-	int envc = bprm->envc;
-
-	sp = (u32 __user *)((-(unsigned long)sizeof(char *))&(unsigned long)p);
-
-	/* This imposes the proper stack alignment for a new process. */
-	sp = (u32 __user *) (((unsigned long) sp) & ~7);
-	if ((envc+argc+3)&1)
-		--sp;
-
-	sp -= envc+1;
-	envp = sp;
-	sp -= argc+1;
-	argv = sp;
-	put_user(argc,--sp);
-	current->mm->arg_start = (unsigned long) p;
-	while (argc-->0) {
-		char c;
-		put_user(((u32)(unsigned long)(p)),argv++);
-		do {
-			get_user(c,p++);
-		} while (c);
-	}
-	put_user(0,argv);
-	current->mm->arg_end = current->mm->env_start = (unsigned long) p;
-	while (envc-->0) {
-		char c;
-		put_user(((u32)(unsigned long)(p)),envp++);
-		do {
-			get_user(c,p++);
-		} while (c);
-	}
-	put_user(0,envp);
-	current->mm->env_end = (unsigned long) p;
-	return sp;
-}
-
-/*
- * These are the functions used to load a.out style executables and shared
- * libraries.  There is no binary dependent code anywhere else.
- */
-
-static int load_aout32_binary(struct linux_binprm * bprm, struct pt_regs * regs)
-{
-	struct exec ex;
-	unsigned long error;
-	unsigned long fd_offset;
-	unsigned long rlim;
-	unsigned long orig_thr_flags;
-	int retval;
-
-	ex = *((struct exec *) bprm->buf);		/* exec-header */
-	if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != OMAGIC &&
-	     N_MAGIC(ex) != QMAGIC && N_MAGIC(ex) != NMAGIC) ||
-	    N_TRSIZE(ex) || N_DRSIZE(ex) ||
-	    bprm->file->f_path.dentry->d_inode->i_size < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
-		return -ENOEXEC;
-	}
-
-	fd_offset = N_TXTOFF(ex);
-
-	/* Check initial limits. This avoids letting people circumvent
-	 * size limits imposed on them by creating programs with large
-	 * arrays in the data or bss.
-	 */
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim >= RLIM_INFINITY)
-		rlim = ~0;
-	if (ex.a_data + ex.a_bss > rlim)
-		return -ENOMEM;
-
-	/* Flush all traces of the currently running executable */
-	retval = flush_old_exec(bprm);
-	if (retval)
-		return retval;
-
-	/* OK, This is the point of no return */
-	set_personality(PER_SUNOS);
-
-	current->mm->end_code = ex.a_text +
-		(current->mm->start_code = N_TXTADDR(ex));
-	current->mm->end_data = ex.a_data +
-		(current->mm->start_data = N_DATADDR(ex));
-	current->mm->brk = ex.a_bss +
-		(current->mm->start_brk = N_BSSADDR(ex));
-	current->mm->free_area_cache = current->mm->mmap_base;
-	current->mm->cached_hole_size = 0;
-
-	current->mm->mmap = NULL;
-	compute_creds(bprm);
- 	current->flags &= ~PF_FORKNOEXEC;
-	if (N_MAGIC(ex) == NMAGIC) {
-		loff_t pos = fd_offset;
-		/* Fuck me plenty... */
-		down_write(&current->mm->mmap_sem);	
-		error = do_brk(N_TXTADDR(ex), ex.a_text);
-		up_write(&current->mm->mmap_sem);
-		bprm->file->f_op->read(bprm->file, (char __user *)N_TXTADDR(ex),
-			  ex.a_text, &pos);
-		down_write(&current->mm->mmap_sem);
-		error = do_brk(N_DATADDR(ex), ex.a_data);
-		up_write(&current->mm->mmap_sem);
-		bprm->file->f_op->read(bprm->file, (char __user *)N_DATADDR(ex),
-			  ex.a_data, &pos);
-		goto beyond_if;
-	}
-
-	if (N_MAGIC(ex) == OMAGIC) {
-		loff_t pos = fd_offset;
-		down_write(&current->mm->mmap_sem);
-		do_brk(N_TXTADDR(ex) & PAGE_MASK,
-			ex.a_text+ex.a_data + PAGE_SIZE - 1);
-		up_write(&current->mm->mmap_sem);
-		bprm->file->f_op->read(bprm->file, (char __user *)N_TXTADDR(ex),
-			  ex.a_text+ex.a_data, &pos);
-	} else {
-		static unsigned long error_time;
-		if ((ex.a_text & 0xfff || ex.a_data & 0xfff) &&
-		    (N_MAGIC(ex) != NMAGIC) && (jiffies-error_time) > 5*HZ)
-		{
-			printk(KERN_NOTICE "executable not page aligned\n");
-			error_time = jiffies;
-		}
-
-		if (!bprm->file->f_op->mmap) {
-			loff_t pos = fd_offset;
-			down_write(&current->mm->mmap_sem);
-			do_brk(0, ex.a_text+ex.a_data);
-			up_write(&current->mm->mmap_sem);
-			bprm->file->f_op->read(bprm->file,
-				  (char __user *)N_TXTADDR(ex),
-				  ex.a_text+ex.a_data, &pos);
-			goto beyond_if;
-		}
-
-	        down_write(&current->mm->mmap_sem);
-		error = do_mmap(bprm->file, N_TXTADDR(ex), ex.a_text,
-			PROT_READ | PROT_EXEC,
-			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
-			fd_offset);
-	        up_write(&current->mm->mmap_sem);
-
-		if (error != N_TXTADDR(ex)) {
-			send_sig(SIGKILL, current, 0);
-			return error;
-		}
-
-	        down_write(&current->mm->mmap_sem);
- 		error = do_mmap(bprm->file, N_DATADDR(ex), ex.a_data,
-				PROT_READ | PROT_WRITE | PROT_EXEC,
-				MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE,
-				fd_offset + ex.a_text);
-	        up_write(&current->mm->mmap_sem);
-		if (error != N_DATADDR(ex)) {
-			send_sig(SIGKILL, current, 0);
-			return error;
-		}
-	}
-beyond_if:
-	set_binfmt(&aout32_format);
-
-	set_brk(current->mm->start_brk, current->mm->brk);
-
-	/* Make sure STACK_TOP returns the right thing.  */
-	orig_thr_flags = current_thread_info()->flags;
-	current_thread_info()->flags |= _TIF_32BIT;
-
-	retval = setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
-	if (retval < 0) { 
-		current_thread_info()->flags = orig_thr_flags;
-
-		/* Someone check-me: is this error path enough? */ 
-		send_sig(SIGKILL, current, 0); 
-		return retval;
-	}
-
-	current->mm->start_stack =
-		(unsigned long) create_aout32_tables((char __user *)bprm->p, bprm);
-	tsb_context_switch(current->mm);
-
-	start_thread32(regs, ex.a_entry, current->mm->start_stack);
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
-	return 0;
-}
-
-/* N.B. Move to .h file and use code in fs/binfmt_aout.c? */
-static int load_aout32_library(struct file *file)
-{
-	struct inode * inode;
-	unsigned long bss, start_addr, len;
-	unsigned long error;
-	int retval;
-	struct exec ex;
-
-	inode = file->f_path.dentry->d_inode;
-
-	retval = -ENOEXEC;
-	error = kernel_read(file, 0, (char *) &ex, sizeof(ex));
-	if (error != sizeof(ex))
-		goto out;
-
-	/* We come in here for the regular a.out style of shared libraries */
-	if ((N_MAGIC(ex) != ZMAGIC && N_MAGIC(ex) != QMAGIC) || N_TRSIZE(ex) ||
-	    N_DRSIZE(ex) || ((ex.a_entry & 0xfff) && N_MAGIC(ex) == ZMAGIC) ||
-	    inode->i_size < ex.a_text+ex.a_data+N_SYMSIZE(ex)+N_TXTOFF(ex)) {
-		goto out;
-	}
-
-	if (N_MAGIC(ex) == ZMAGIC && N_TXTOFF(ex) &&
-	    (N_TXTOFF(ex) < inode->i_sb->s_blocksize)) {
-		printk("N_TXTOFF < BLOCK_SIZE. Please convert library\n");
-		goto out;
-	}
-
-	if (N_FLAGS(ex))
-		goto out;
-
-	/* For  QMAGIC, the starting address is 0x20 into the page.  We mask
-	   this off to get the starting address for the page */
-
-	start_addr =  ex.a_entry & 0xfffff000;
-
-	/* Now use mmap to map the library into memory. */
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap(file, start_addr, ex.a_text + ex.a_data,
-			PROT_READ | PROT_WRITE | PROT_EXEC,
-			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
-			N_TXTOFF(ex));
-	up_write(&current->mm->mmap_sem);
-	retval = error;
-	if (error != start_addr)
-		goto out;
-
-	len = PAGE_ALIGN(ex.a_text + ex.a_data);
-	bss = ex.a_text + ex.a_data + ex.a_bss;
-	if (bss > len) {
-		down_write(&current->mm->mmap_sem);
-		error = do_brk(start_addr + len, bss - len);
-		up_write(&current->mm->mmap_sem);
-		retval = error;
-		if (error != start_addr + len)
-			goto out;
-	}
-	retval = 0;
-out:
-	return retval;
-}
-
-static int __init init_aout32_binfmt(void)
-{
-	return register_binfmt(&aout32_format);
-}
-
-static void __exit exit_aout32_binfmt(void)
-{
-	unregister_binfmt(&aout32_format);
-}
-
-module_init(init_aout32_binfmt);
-module_exit(exit_aout32_binfmt);
diff --git a/arch/sparc64/kernel/cpu.c b/arch/sparc64/kernel/cpu.c
index e43db73f2b91..0097c08dc600 100644
--- a/arch/sparc64/kernel/cpu.c
+++ b/arch/sparc64/kernel/cpu.c
@@ -15,6 +15,8 @@
 #include <asm/spitfire.h>
 #include <asm/oplib.h>
 
+#include "entry.h"
+
 DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
 
 struct cpu_iu_info {
@@ -30,7 +32,7 @@ struct cpu_fp_info {
   char* fp_name;
 };
 
-struct cpu_fp_info linux_sparc_fpu[] = {
+static struct cpu_fp_info linux_sparc_fpu[] = {
   { 0x17, 0x10, 0, "UltraSparc I integrated FPU"},
   { 0x22, 0x10, 0, "UltraSparc I integrated FPU"},
   { 0x17, 0x11, 0, "UltraSparc II integrated FPU"},
@@ -46,7 +48,7 @@ struct cpu_fp_info linux_sparc_fpu[] = {
 
 #define NSPARCFPU  ARRAY_SIZE(linux_sparc_fpu)
 
-struct cpu_iu_info linux_sparc_chips[] = {
+static struct cpu_iu_info linux_sparc_chips[] = {
   { 0x17, 0x10, "TI UltraSparc I   (SpitFire)"},
   { 0x22, 0x10, "TI UltraSparc I   (SpitFire)"},
   { 0x17, 0x11, "TI UltraSparc II  (BlackBird)"},
@@ -65,8 +67,6 @@ struct cpu_iu_info linux_sparc_chips[] = {
 char *sparc_cpu_type;
 char *sparc_fpu_type;
 
-unsigned int fsr_storage;
-
 static void __init sun4v_cpu_probe(void)
 {
 	switch (sun4v_chip_type) {
@@ -94,8 +94,10 @@ void __init cpu_probe(void)
 	unsigned long ver, fpu_vers, manuf, impl, fprs;
 	int i;
 	
-	if (tlb_type == hypervisor)
-		return sun4v_cpu_probe();
+	if (tlb_type == hypervisor) {
+		sun4v_cpu_probe();
+		return;
+	}
 
 	fprs = fprs_read();
 	fprs_write(FPRS_FEF);
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index bd76482077be..edb74f5a1186 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -972,8 +972,7 @@ static void process_ds_work(void)
 	LIST_HEAD(todo);
 
 	spin_lock_irqsave(&ds_lock, flags);
-	list_splice(&ds_work_list, &todo);
-	INIT_LIST_HEAD(&ds_work_list);
+	list_splice_init(&ds_work_list, &todo);
 	spin_unlock_irqrestore(&ds_lock, flags);
 
 	list_for_each_entry_safe(qp, tmp, &todo, list) {
diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S
index 6be4d2d2904e..fb43c76bdc26 100644
--- a/arch/sparc64/kernel/entry.S
+++ b/arch/sparc64/kernel/entry.S
@@ -1353,63 +1353,6 @@ breakpoint_trap:
 	ba,pt		%xcc, rtrap
 	 nop
 
-#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
-    defined(CONFIG_SOLARIS_EMUL_MODULE)
-	/* SunOS uses syscall zero as the 'indirect syscall' it looks
-	 * like indir_syscall(scall_num, arg0, arg1, arg2...);  etc.
-	 * This is complete brain damage.
-	 */
-	.globl	sunos_indir
-sunos_indir:
-	srl		%o0, 0, %o0
-	mov		%o7, %l4
-	cmp		%o0, NR_SYSCALLS
-	blu,a,pt	%icc, 1f
-	 sll		%o0, 0x2, %o0
-	sethi		%hi(sunos_nosys), %l6
-	b,pt		%xcc, 2f
-	 or		%l6, %lo(sunos_nosys), %l6
-1:	sethi		%hi(sunos_sys_table), %l7
-	or		%l7, %lo(sunos_sys_table), %l7
-	lduw		[%l7 + %o0], %l6
-2:	mov		%o1, %o0
-	mov		%o2, %o1
-	mov		%o3, %o2
-	mov		%o4, %o3
-	mov		%o5, %o4
-	call		%l6
-	 mov		%l4, %o7
-
-	.globl	sunos_getpid
-sunos_getpid:
-	call	sys_getppid
-	 nop
-	call	sys_getpid
-	 stx	%o0, [%sp + PTREGS_OFF + PT_V9_I1]
-	b,pt	%xcc, ret_sys_call
-	 stx	%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-
-	/* SunOS getuid() returns uid in %o0 and euid in %o1 */
-	.globl	sunos_getuid
-sunos_getuid:
-	call	sys32_geteuid16
-	 nop
-	call	sys32_getuid16
-	 stx	%o0, [%sp + PTREGS_OFF + PT_V9_I1]
-	b,pt	%xcc, ret_sys_call
-	 stx	%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-
-	/* SunOS getgid() returns gid in %o0 and egid in %o1 */
-	.globl	sunos_getgid
-sunos_getgid:
-	call	sys32_getegid16
-	 nop
-	call	sys32_getgid16
-	 stx	%o0, [%sp + PTREGS_OFF + PT_V9_I1]
-	b,pt	%xcc, ret_sys_call
-	 stx	%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-#endif
-
 	/* SunOS's execv() call only specifies the argv argument, the
 	 * environment settings are the same as the calling processes.
 	 */
@@ -1591,7 +1534,7 @@ linux_syscall_trace:
 	 mov		%i4, %o4
 
 
-	/* Linux 32-bit and SunOS system calls enter here... */
+	/* Linux 32-bit system calls enter here... */
 	.align	32
 	.globl	linux_sparc_syscall32
 linux_sparc_syscall32:
@@ -1614,7 +1557,7 @@ linux_sparc_syscall32:
 	 srl		%i3, 0, %o3				! IEU0
 	ba,a,pt		%xcc, 3f
 
-	/* Linux native and SunOS system calls enter here... */
+	/* Linux native system calls enter here... */
 	.align	32
 	.globl	linux_sparc_syscall, ret_sys_call
 linux_sparc_syscall:
@@ -1705,6 +1648,36 @@ __flushw_user:
 2:	retl
 	 nop
 
+	/* Flush %fp and %i7 to the stack for all register
+	 * windows active inside of the cpu.  This allows
+	 * show_stack_trace() to avoid using an expensive
+	 * 'flushw'.
+	 */
+	.globl		stack_trace_flush
+	.type		stack_trace_flush,#function
+stack_trace_flush:
+	rdpr		%pstate, %o0
+	wrpr		%o0, PSTATE_IE, %pstate
+
+	rdpr		%cwp, %g1
+	rdpr		%canrestore, %g2
+	sub		%g1, 1, %g3
+
+1:	brz,pn		%g2, 2f
+	 sub		%g2, 1, %g2
+	wrpr		%g3, %cwp
+	stx		%fp, [%sp + STACK_BIAS + RW_V9_I6]
+	stx		%i7, [%sp + STACK_BIAS + RW_V9_I7]
+	ba,pt		%xcc, 1b
+	 sub		%g3, 1, %g3
+
+2:	wrpr		%g1, %cwp
+	wrpr		%o0, %pstate
+
+	retl
+	 nop
+	.size		stack_trace_flush,.-stack_trace_flush
+
 #ifdef CONFIG_SMP
 	.globl		hard_smp_processor_id
 hard_smp_processor_id:
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
new file mode 100644
index 000000000000..4a91e9c6d31b
--- /dev/null
+++ b/arch/sparc64/kernel/entry.h
@@ -0,0 +1,196 @@
+#ifndef _ENTRY_H
+#define _ENTRY_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+extern char *sparc_cpu_type;
+extern char *sparc_fpu_type;
+
+extern void __init per_cpu_patch(void);
+extern void __init sun4v_patch(void);
+extern void __init boot_cpu_id_too_large(int cpu);
+extern unsigned int dcache_parity_tl1_occurred;
+extern unsigned int icache_parity_tl1_occurred;
+
+extern asmlinkage void update_perfctrs(void);
+extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
+extern void timer_interrupt(int irq, struct pt_regs *regs);
+
+extern void do_notify_resume(struct pt_regs *regs,
+			     unsigned long orig_i0,
+			     int restart_syscall,
+			     unsigned long thread_info_flags);
+
+extern asmlinkage void syscall_trace(struct pt_regs *regs,
+				     int syscall_exit_p);
+
+extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
+
+extern void do_fpe_common(struct pt_regs *regs);
+extern void do_fpieee(struct pt_regs *regs);
+extern void do_fpother(struct pt_regs *regs);
+extern void do_tof(struct pt_regs *regs);
+extern void do_div0(struct pt_regs *regs);
+extern void do_illegal_instruction(struct pt_regs *regs);
+extern void mem_address_unaligned(struct pt_regs *regs,
+				  unsigned long sfar,
+				  unsigned long sfsr);
+extern void sun4v_do_mna(struct pt_regs *regs,
+			 unsigned long addr,
+			 unsigned long type_ctx);
+extern void do_privop(struct pt_regs *regs);
+extern void do_privact(struct pt_regs *regs);
+extern void do_cee(struct pt_regs *regs);
+extern void do_cee_tl1(struct pt_regs *regs);
+extern void do_dae_tl1(struct pt_regs *regs);
+extern void do_iae_tl1(struct pt_regs *regs);
+extern void do_div0_tl1(struct pt_regs *regs);
+extern void do_fpdis_tl1(struct pt_regs *regs);
+extern void do_fpieee_tl1(struct pt_regs *regs);
+extern void do_fpother_tl1(struct pt_regs *regs);
+extern void do_ill_tl1(struct pt_regs *regs);
+extern void do_irq_tl1(struct pt_regs *regs);
+extern void do_lddfmna_tl1(struct pt_regs *regs);
+extern void do_stdfmna_tl1(struct pt_regs *regs);
+extern void do_paw(struct pt_regs *regs);
+extern void do_paw_tl1(struct pt_regs *regs);
+extern void do_vaw(struct pt_regs *regs);
+extern void do_vaw_tl1(struct pt_regs *regs);
+extern void do_tof_tl1(struct pt_regs *regs);
+extern void do_getpsr(struct pt_regs *regs);
+
+extern void spitfire_insn_access_exception(struct pt_regs *regs,
+					   unsigned long sfsr,
+					   unsigned long sfar);
+extern void spitfire_insn_access_exception_tl1(struct pt_regs *regs,
+					       unsigned long sfsr,
+					       unsigned long sfar);
+extern void spitfire_data_access_exception(struct pt_regs *regs,
+					   unsigned long sfsr,
+					   unsigned long sfar);
+extern void spitfire_data_access_exception_tl1(struct pt_regs *regs,
+					       unsigned long sfsr,
+					       unsigned long sfar);
+extern void spitfire_access_error(struct pt_regs *regs,
+				  unsigned long status_encoded,
+				  unsigned long afar);
+
+extern void cheetah_fecc_handler(struct pt_regs *regs,
+				 unsigned long afsr,
+				 unsigned long afar);
+extern void cheetah_cee_handler(struct pt_regs *regs,
+				unsigned long afsr,
+				unsigned long afar);
+extern void cheetah_deferred_handler(struct pt_regs *regs,
+				     unsigned long afsr,
+				     unsigned long afar);
+extern void cheetah_plus_parity_error(int type, struct pt_regs *regs);
+
+extern void sun4v_insn_access_exception(struct pt_regs *regs,
+					unsigned long addr,
+					unsigned long type_ctx);
+extern void sun4v_insn_access_exception_tl1(struct pt_regs *regs,
+					    unsigned long addr,
+					    unsigned long type_ctx);
+extern void sun4v_data_access_exception(struct pt_regs *regs,
+					unsigned long addr,
+					unsigned long type_ctx);
+extern void sun4v_data_access_exception_tl1(struct pt_regs *regs,
+					    unsigned long addr,
+					    unsigned long type_ctx);
+extern void sun4v_resum_error(struct pt_regs *regs,
+			      unsigned long offset);
+extern void sun4v_resum_overflow(struct pt_regs *regs);
+extern void sun4v_nonresum_error(struct pt_regs *regs,
+				 unsigned long offset);
+extern void sun4v_nonresum_overflow(struct pt_regs *regs);
+
+extern unsigned long sun4v_err_itlb_vaddr;
+extern unsigned long sun4v_err_itlb_ctx;
+extern unsigned long sun4v_err_itlb_pte;
+extern unsigned long sun4v_err_itlb_error;
+
+extern void sun4v_itlb_error_report(struct pt_regs *regs, int tl);
+
+extern unsigned long sun4v_err_dtlb_vaddr;
+extern unsigned long sun4v_err_dtlb_ctx;
+extern unsigned long sun4v_err_dtlb_pte;
+extern unsigned long sun4v_err_dtlb_error;
+
+extern void sun4v_dtlb_error_report(struct pt_regs *regs, int tl);
+extern void hypervisor_tlbop_error(unsigned long err,
+				   unsigned long op);
+extern void hypervisor_tlbop_error_xcall(unsigned long err,
+					 unsigned long op);
+
+/* WARNING: The error trap handlers in assembly know the precise
+ *	    layout of the following structure.
+ *
+ * C-level handlers in traps.c use this information to log the
+ * error and then determine how to recover (if possible).
+ */
+struct cheetah_err_info {
+/*0x00*/u64 afsr;
+/*0x08*/u64 afar;
+
+	/* D-cache state */
+/*0x10*/u64 dcache_data[4];	/* The actual data	*/
+/*0x30*/u64 dcache_index;	/* D-cache index	*/
+/*0x38*/u64 dcache_tag;		/* D-cache tag/valid	*/
+/*0x40*/u64 dcache_utag;	/* D-cache microtag	*/
+/*0x48*/u64 dcache_stag;	/* D-cache snooptag	*/
+
+	/* I-cache state */
+/*0x50*/u64 icache_data[8];	/* The actual insns + predecode	*/
+/*0x90*/u64 icache_index;	/* I-cache index	*/
+/*0x98*/u64 icache_tag;		/* I-cache phys tag	*/
+/*0xa0*/u64 icache_utag;	/* I-cache microtag	*/
+/*0xa8*/u64 icache_stag;	/* I-cache snooptag	*/
+/*0xb0*/u64 icache_upper;	/* I-cache upper-tag	*/
+/*0xb8*/u64 icache_lower;	/* I-cache lower-tag	*/
+
+	/* E-cache state */
+/*0xc0*/u64 ecache_data[4];	/* 32 bytes from staging registers */
+/*0xe0*/u64 ecache_index;	/* E-cache index	*/
+/*0xe8*/u64 ecache_tag;		/* E-cache tag/state	*/
+
+/*0xf0*/u64 __pad[32 - 30];
+};
+#define CHAFSR_INVALID		((u64)-1L)
+
+/* This is allocated at boot time based upon the largest hardware
+ * cpu ID in the system.  We allocate two entries per cpu, one for
+ * TL==0 logging and one for TL >= 1 logging.
+ */
+extern struct cheetah_err_info *cheetah_error_log;
+
+/* UPA nodes send interrupt packet to UltraSparc with first data reg
+ * value low 5 (7 on Starfire) bits holding the IRQ identifier being
+ * delivered.  We must translate this into a non-vector IRQ so we can
+ * set the softint on this cpu.
+ *
+ * To make processing these packets efficient and race free we use
+ * an array of irq buckets below.  The interrupt vector handler in
+ * entry.S feeds incoming packets into per-cpu pil-indexed lists.
+ *
+ * If you make changes to ino_bucket, please update hand coded assembler
+ * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
+ */
+struct ino_bucket {
+/*0x00*/unsigned long __irq_chain_pa;
+
+	/* Virtual interrupt number assigned to this INO.  */
+/*0x08*/unsigned int __virt_irq;
+/*0x0c*/unsigned int __pad;
+};
+
+extern struct ino_bucket *ivector_table;
+extern unsigned long ivector_table_pa;
+
+extern void handler_irq(int irq, struct pt_regs *regs);
+extern void init_irqwork_curcpu(void);
+extern void __cpuinit sun4v_register_mondo_queues(int this_cpu);
+
+#endif /* _ENTRY_H */
diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S
index 44b105c04dd3..34f8ff57c56b 100644
--- a/arch/sparc64/kernel/head.S
+++ b/arch/sparc64/kernel/head.S
@@ -288,8 +288,12 @@ sun4v_chip_type:
 	/* Leave arg2 as-is, prom_mmu_ihandle_cache */
 	mov	-1, %l3
 	stx	%l3, [%sp + 2047 + 128 + 0x28]	! arg3: mode (-1 default)
-	sethi	%hi(8 * 1024 * 1024), %l3
-	stx	%l3, [%sp + 2047 + 128 + 0x30]	! arg4: size (8MB)
+	/* 4MB align the kernel image size. */
+	set	(_end - KERNBASE), %l3
+	set	((4 * 1024 * 1024) - 1), %l4
+	add	%l3, %l4, %l3
+	andn	%l3, %l4, %l3
+	stx	%l3, [%sp + 2047 + 128 + 0x30]	! arg4: roundup(ksize, 4MB)
 	sethi	%hi(KERNBASE), %l3
 	stx	%l3, [%sp + 2047 + 128 + 0x38]	! arg5: vaddr (KERNBASE)
 	stx	%g0, [%sp + 2047 + 128 + 0x40]	! arg6: empty
diff --git a/arch/sparc64/kernel/iommu.c b/arch/sparc64/kernel/iommu.c
index fbaab3497bfd..756fa24eeefa 100644
--- a/arch/sparc64/kernel/iommu.c
+++ b/arch/sparc64/kernel/iommu.c
@@ -516,9 +516,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 	unsigned long flags, handle, prot, ctx;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned int max_seg_size;
+	unsigned long seg_boundary_size;
 	int outcount, incount, i;
 	struct strbuf *strbuf;
 	struct iommu *iommu;
+	unsigned long base_shift;
 
 	BUG_ON(direction == DMA_NONE);
 
@@ -549,8 +551,11 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 	outs->dma_length = 0;
 
 	max_seg_size = dma_get_max_seg_size(dev);
+	seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+				  IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+	base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
 	for_each_sg(sglist, s, nelems, i) {
-		unsigned long paddr, npages, entry, slen;
+		unsigned long paddr, npages, entry, out_entry = 0, slen;
 		iopte_t *base;
 
 		slen = s->length;
@@ -593,7 +598,9 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 			 * - allocated dma_addr isn't contiguous to previous allocation
 			 */
 			if ((dma_addr != dma_next) ||
-			    (outs->dma_length + s->length > max_seg_size)) {
+			    (outs->dma_length + s->length > max_seg_size) ||
+			    (is_span_boundary(out_entry, base_shift,
+					      seg_boundary_size, outs, s))) {
 				/* Can't merge: create a new segment */
 				segstart = s;
 				outcount++;
@@ -607,6 +614,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 			/* This is a new segment, fill entries */
 			outs->dma_address = dma_addr;
 			outs->dma_length = slen;
+			out_entry = entry;
 		}
 
 		/* Calculate next page pointer for contiguous check */
@@ -626,7 +634,7 @@ static int dma_4u_map_sg(struct device *dev, struct scatterlist *sglist,
 iommu_map_failed:
 	for_each_sg(sglist, s, nelems, i) {
 		if (s->dma_length != 0) {
-			unsigned long vaddr, npages, entry, i;
+			unsigned long vaddr, npages, entry, j;
 			iopte_t *base;
 
 			vaddr = s->dma_address & IO_PAGE_MASK;
@@ -637,8 +645,8 @@ iommu_map_failed:
 				>> IO_PAGE_SHIFT;
 			base = iommu->page_table + entry;
 
-			for (i = 0; i < npages; i++)
-				iopte_make_dummy(iommu, base + i);
+			for (j = 0; j < npages; j++)
+				iopte_make_dummy(iommu, base + j);
 
 			s->dma_address = DMA_ERROR_CODE;
 			s->dma_length = 0;
@@ -803,7 +811,7 @@ static void dma_4u_sync_sg_for_cpu(struct device *dev,
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
-const struct dma_ops sun4u_dma_ops = {
+static const struct dma_ops sun4u_dma_ops = {
 	.alloc_coherent		= dma_4u_alloc_coherent,
 	.free_coherent		= dma_4u_free_coherent,
 	.map_single		= dma_4u_map_single,
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index 0713bd58499c..f3575a614fa2 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -12,6 +12,7 @@
 #include <linux/mm.h>
 #include <linux/scatterlist.h>
 #include <linux/device.h>
+#include <linux/iommu-helper.h>
 
 #include <asm/iommu.h>
 #include <asm/scatterlist.h>
@@ -45,17 +46,16 @@ static inline unsigned long iommu_num_pages(unsigned long vaddr,
 	return npages;
 }
 
-static inline unsigned long calc_npages(struct scatterlist *sglist, int nelems)
+static inline int is_span_boundary(unsigned long entry,
+				   unsigned long shift,
+				   unsigned long boundary_size,
+				   struct scatterlist *outs,
+				   struct scatterlist *sg)
 {
-	unsigned long i, npages = 0;
-	struct scatterlist *sg;
+	unsigned long paddr = SG_ENT_PHYS_ADDRESS(outs);
+	int nr = iommu_num_pages(paddr, outs->dma_length + sg->length);
 
-	for_each_sg(sglist, sg, nelems, i) {
-		unsigned long paddr = SG_ENT_PHYS_ADDRESS(sg);
-		npages += iommu_num_pages(paddr, sg->length);
-	}
-
-	return npages;
+	return iommu_is_span_boundary(entry, nr, shift, boundary_size);
 }
 
 extern unsigned long iommu_range_alloc(struct device *dev,
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index 5ec06c8c7fea..eb88bd6e674e 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -44,27 +44,10 @@
 #include <asm/hypervisor.h>
 #include <asm/cacheflush.h>
 
-/* UPA nodes send interrupt packet to UltraSparc with first data reg
- * value low 5 (7 on Starfire) bits holding the IRQ identifier being
- * delivered.  We must translate this into a non-vector IRQ so we can
- * set the softint on this cpu.
- *
- * To make processing these packets efficient and race free we use
- * an array of irq buckets below.  The interrupt vector handler in
- * entry.S feeds incoming packets into per-cpu pil-indexed lists.
- *
- * If you make changes to ino_bucket, please update hand coded assembler
- * of the vectored interrupt trap handler(s) in entry.S and sun4v_ivec.S
- */
-struct ino_bucket {
-/*0x00*/unsigned long __irq_chain_pa;
-
-	/* Virtual interrupt number assigned to this INO.  */
-/*0x08*/unsigned int __virt_irq;
-/*0x0c*/unsigned int __pad;
-};
+#include "entry.h"
 
 #define NUM_IVECS	(IMAP_INR + 1)
+
 struct ino_bucket *ivector_table;
 unsigned long ivector_table_pa;
 
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index ddca6c6c0b49..01839706bd52 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -335,8 +335,10 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 	unsigned long flags, handle, prot;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned int max_seg_size;
+	unsigned long seg_boundary_size;
 	int outcount, incount, i;
 	struct iommu *iommu;
+	unsigned long base_shift;
 	long err;
 
 	BUG_ON(direction == DMA_NONE);
@@ -362,8 +364,11 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 	iommu_batch_start(dev, prot, ~0UL);
 
 	max_seg_size = dma_get_max_seg_size(dev);
+	seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
+				  IO_PAGE_SIZE) >> IO_PAGE_SHIFT;
+	base_shift = iommu->page_table_map_base >> IO_PAGE_SHIFT;
 	for_each_sg(sglist, s, nelems, i) {
-		unsigned long paddr, npages, entry, slen;
+		unsigned long paddr, npages, entry, out_entry = 0, slen;
 
 		slen = s->length;
 		/* Sanity check */
@@ -406,7 +411,9 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 			 * - allocated dma_addr isn't contiguous to previous allocation
 			 */
 			if ((dma_addr != dma_next) ||
-			    (outs->dma_length + s->length > max_seg_size)) {
+			    (outs->dma_length + s->length > max_seg_size) ||
+			    (is_span_boundary(out_entry, base_shift,
+					      seg_boundary_size, outs, s))) {
 				/* Can't merge: create a new segment */
 				segstart = s;
 				outcount++;
@@ -420,6 +427,7 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist,
 			/* This is a new segment, fill entries */
 			outs->dma_address = dma_addr;
 			outs->dma_length = slen;
+			out_entry = entry;
 		}
 
 		/* Calculate next page pointer for contiguous check */
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 2aafce7dfc0e..acf8c5250aa9 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -114,8 +114,6 @@ void cpu_idle(void)
 	}
 }
 
-extern char reboot_command [];
-
 void machine_halt(void)
 {
 	sstate_halt();
@@ -733,9 +731,6 @@ asmlinkage int sparc_execve(struct pt_regs *regs)
 		current_thread_info()->xfsr[0] = 0;
 		current_thread_info()->fpsaved[0] = 0;
 		regs->tstate &= ~TSTATE_PEF;
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
 	}
 out:
 	return error;
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index 9a1ba1fe859d..e9fc0aa2da38 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -35,6 +35,9 @@
 #include <asm/spitfire.h>
 #include <asm/page.h>
 #include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+
+#include "entry.h"
 
 /* #define ALLOW_INIT_TRACING */
 
@@ -67,6 +70,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 	if (tlb_type == hypervisor)
 		return;
 
+	preempt_disable();
+
 #ifdef DCACHE_ALIASING_POSSIBLE
 	/* If bit 13 of the kernel address we used to access the
 	 * user page is the same as the virtual address that page
@@ -105,6 +110,87 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		for (; start < end; start += icache_line_size)
 			flushi(start);
 	}
+
+	preempt_enable();
+}
+
+static int get_from_target(struct task_struct *target, unsigned long uaddr,
+			   void *kbuf, int len)
+{
+	if (target == current) {
+		if (copy_from_user(kbuf, (void __user *) uaddr, len))
+			return -EFAULT;
+	} else {
+		int len2 = access_process_vm(target, uaddr, kbuf, len, 0);
+		if (len2 != len)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int set_to_target(struct task_struct *target, unsigned long uaddr,
+			 void *kbuf, int len)
+{
+	if (target == current) {
+		if (copy_to_user((void __user *) uaddr, kbuf, len))
+			return -EFAULT;
+	} else {
+		int len2 = access_process_vm(target, uaddr, kbuf, len, 1);
+		if (len2 != len)
+			return -EFAULT;
+	}
+	return 0;
+}
+
+static int regwindow64_get(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   struct reg_window *wbuf)
+{
+	unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+	if (test_tsk_thread_flag(current, TIF_32BIT)) {
+		struct reg_window32 win32;
+		int i;
+
+		if (get_from_target(target, rw_addr, &win32, sizeof(win32)))
+			return -EFAULT;
+		for (i = 0; i < 8; i++)
+			wbuf->locals[i] = win32.locals[i];
+		for (i = 0; i < 8; i++)
+			wbuf->ins[i] = win32.ins[i];
+	} else {
+		rw_addr += STACK_BIAS;
+		if (get_from_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+			return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int regwindow64_set(struct task_struct *target,
+			   const struct pt_regs *regs,
+			   struct reg_window *wbuf)
+{
+	unsigned long rw_addr = regs->u_regs[UREG_I6];
+
+	if (test_tsk_thread_flag(current, TIF_32BIT)) {
+		struct reg_window32 win32;
+		int i;
+
+		for (i = 0; i < 8; i++)
+			win32.locals[i] = wbuf->locals[i];
+		for (i = 0; i < 8; i++)
+			win32.ins[i] = wbuf->ins[i];
+
+		if (set_to_target(target, rw_addr, &win32, sizeof(win32)))
+			return -EFAULT;
+	} else {
+		rw_addr += STACK_BIAS;
+		if (set_to_target(target, rw_addr, wbuf, sizeof(*wbuf)))
+			return -EFAULT;
+	}
+
+	return 0;
 }
 
 enum sparc_regset {
@@ -126,16 +212,13 @@ static int genregs64_get(struct task_struct *target,
 	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				  regs->u_regs,
 				  0, 16 * sizeof(u64));
-	if (!ret) {
-		unsigned long __user *reg_window = (unsigned long __user *)
-			(regs->u_regs[UREG_I6] + STACK_BIAS);
-		unsigned long window[16];
+	if (!ret && count && pos < (32 * sizeof(u64))) {
+		struct reg_window window;
 
-		if (copy_from_user(window, reg_window, sizeof(window)))
+		if (regwindow64_get(target, regs, &window))
 			return -EFAULT;
-
 		ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					  window,
+					  &window,
 					  16 * sizeof(u64),
 					  32 * sizeof(u64));
 	}
@@ -157,10 +240,11 @@ static int genregs64_get(struct task_struct *target,
 					  36 * sizeof(u64));
 	}
 
-	if (!ret)
+	if (!ret) {
 		ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
 					       36 * sizeof(u64), -1);
 
+	}
 	return ret;
 }
 
@@ -178,20 +262,19 @@ static int genregs64_set(struct task_struct *target,
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				 regs->u_regs,
 				 0, 16 * sizeof(u64));
-	if (!ret && count > 0) {
-		unsigned long __user *reg_window = (unsigned long __user *)
-			(regs->u_regs[UREG_I6] + STACK_BIAS);
-		unsigned long window[16];
+	if (!ret && count && pos < (32 * sizeof(u64))) {
+		struct reg_window window;
 
-		if (copy_from_user(window, reg_window, sizeof(window)))
+		if (regwindow64_get(target, regs, &window))
 			return -EFAULT;
 
 		ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					 window,
+					 &window,
 					 16 * sizeof(u64),
 					 32 * sizeof(u64));
+
 		if (!ret &&
-		    copy_to_user(reg_window, window, sizeof(window)))
+		    regwindow64_set(target, regs, &window))
 			return -EFAULT;
 	}
 
@@ -382,6 +465,7 @@ static const struct user_regset_view user_sparc64_view = {
 	.regsets = sparc64_regsets, .n = ARRAY_SIZE(sparc64_regsets)
 };
 
+#ifdef CONFIG_COMPAT
 static int genregs32_get(struct task_struct *target,
 			 const struct user_regset *regset,
 			 unsigned int pos, unsigned int count,
@@ -404,9 +488,22 @@ static int genregs32_get(struct task_struct *target,
 			*k++ = regs->u_regs[pos++];
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(*k++, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      k, sizeof(*k), 0)
+				    != sizeof(*k))
+					return -EFAULT;
+				k++;
+				pos++;
+			}
 		}
 	} else {
 		for (; count > 0 && pos < 16; count--) {
@@ -415,10 +512,28 @@ static int genregs32_get(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, &reg_window[pos++]) ||
-			    put_user(reg, u++))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(reg, &reg_window[pos++]) ||
+				    put_user(reg, u++))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      &reg, sizeof(reg), 0)
+				    != sizeof(reg))
+					return -EFAULT;
+				if (access_process_vm(target,
+						      (unsigned long) u,
+						      &reg, sizeof(reg), 1)
+				    != sizeof(reg))
+					return -EFAULT;
+				pos++;
+				u++;
+			}
 		}
 	}
 	while (count > 0) {
@@ -480,9 +595,23 @@ static int genregs32_set(struct task_struct *target,
 			regs->u_regs[pos++] = *k++;
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (put_user(*k++, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (put_user(*k++, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      (void *) k,
+						      sizeof(*k), 1)
+				    != sizeof(*k))
+					return -EFAULT;
+				k++;
+				pos++;
+			}
 		}
 	} else {
 		for (; count > 0 && pos < 16; count--) {
@@ -492,10 +621,29 @@ static int genregs32_set(struct task_struct *target,
 		}
 
 		reg_window = (compat_ulong_t __user *) regs->u_regs[UREG_I6];
-		for (; count > 0 && pos < 32; count--) {
-			if (get_user(reg, u++) ||
-			    put_user(reg, &reg_window[pos++]))
-				return -EFAULT;
+		if (target == current) {
+			for (; count > 0 && pos < 32; count--) {
+				if (get_user(reg, u++) ||
+				    put_user(reg, &reg_window[pos++]))
+					return -EFAULT;
+			}
+		} else {
+			for (; count > 0 && pos < 32; count--) {
+				if (access_process_vm(target,
+						      (unsigned long)
+						      u,
+						      &reg, sizeof(reg), 0)
+				    != sizeof(reg))
+					return -EFAULT;
+				if (access_process_vm(target,
+						      (unsigned long)
+						      &reg_window[pos],
+						      &reg, sizeof(reg), 1)
+				    != sizeof(reg))
+					return -EFAULT;
+				pos++;
+				u++;
+			}
 		}
 	}
 	while (count > 0) {
@@ -676,14 +824,18 @@ static const struct user_regset_view user_sparc32_view = {
 	.name = "sparc", .e_machine = EM_SPARC,
 	.regsets = sparc32_regsets, .n = ARRAY_SIZE(sparc32_regsets)
 };
+#endif /* CONFIG_COMPAT */
 
 const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 {
+#ifdef CONFIG_COMPAT
 	if (test_tsk_thread_flag(task, TIF_32BIT))
 		return &user_sparc32_view;
+#endif
 	return &user_sparc64_view;
 }
 
+#ifdef CONFIG_COMPAT
 struct compat_fps {
 	unsigned int regs[32];
 	unsigned int fsr;
@@ -699,7 +851,7 @@ struct compat_fps {
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
-	const struct user_regset_view *view = task_user_regset_view(child);
+	const struct user_regset_view *view = task_user_regset_view(current);
 	compat_ulong_t caddr2 = task_pt_regs(current)->u_regs[UREG_I4];
 	struct pt_regs32 __user *pregs;
 	struct compat_fps __user *fps;
@@ -798,6 +950,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 	return ret;
 }
+#endif /* CONFIG_COMPAT */
 
 struct fps {
 	unsigned int regs[64];
@@ -806,12 +959,15 @@ struct fps {
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
-	const struct user_regset_view *view = task_user_regset_view(child);
-	struct pt_regs __user *pregs = (struct pt_regs __user *) addr;
+	const struct user_regset_view *view = task_user_regset_view(current);
 	unsigned long addr2 = task_pt_regs(current)->u_regs[UREG_I4];
-	struct fps __user *fps = (struct fps __user *) addr;
+	struct pt_regs __user *pregs;
+	struct fps __user *fps;
 	int ret;
 
+	pregs = (struct pt_regs __user *) (unsigned long) addr;
+	fps = (struct fps __user *) (unsigned long) addr;
+
 	switch (request) {
 	case PTRACE_PEEKUSR:
 		ret = (addr != 0) ? -EIO : 0;
diff --git a/arch/sparc64/kernel/semaphore.c b/arch/sparc64/kernel/semaphore.c
deleted file mode 100644
index 9974a6899551..000000000000
--- a/arch/sparc64/kernel/semaphore.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* semaphore.c: Sparc64 semaphore implementation.
- *
- * This is basically the PPC semaphore scheme ported to use
- * the sparc64 atomic instructions, so see the PPC code for
- * credits.
- */
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-
-/*
- * Atomically update sem->count.
- * This does the equivalent of the following:
- *
- *	old_count = sem->count;
- *	tmp = MAX(old_count, 0) + incr;
- *	sem->count = tmp;
- *	return old_count;
- */
-static inline int __sem_update_count(struct semaphore *sem, int incr)
-{
-	int old_count, tmp;
-
-	__asm__ __volatile__("\n"
-"	! __sem_update_count old_count(%0) tmp(%1) incr(%4) &sem->count(%3)\n"
-"1:	ldsw	[%3], %0\n"
-"	mov	%0, %1\n"
-"	cmp	%0, 0\n"
-"	movl	%%icc, 0, %1\n"
-"	add	%1, %4, %1\n"
-"	cas	[%3], %0, %1\n"
-"	cmp	%0, %1\n"
-"	membar	#StoreLoad | #StoreStore\n"
-"	bne,pn	%%icc, 1b\n"
-"	 nop\n"
-	: "=&r" (old_count), "=&r" (tmp), "=m" (sem->count)
-	: "r" (&sem->count), "r" (incr), "m" (sem->count)
-	: "cc");
-
-	return old_count;
-}
-
-static void __up(struct semaphore *sem)
-{
-	__sem_update_count(sem, 1);
-	wake_up(&sem->wait);
-}
-
-void up(struct semaphore *sem)
-{
-	/* This atomically does:
-	 * 	old_val = sem->count;
-	 *	new_val = sem->count + 1;
-	 *	sem->count = new_val;
-	 *	if (old_val < 0)
-	 *		__up(sem);
-	 *
-	 * The (old_val < 0) test is equivalent to
-	 * the more straightforward (new_val <= 0),
-	 * but it is easier to test the former because
-	 * of how the CAS instruction works.
-	 */
-
-	__asm__ __volatile__("\n"
-"	! up sem(%0)\n"
-"	membar	#StoreLoad | #LoadLoad\n"
-"1:	lduw	[%0], %%g1\n"
-"	add	%%g1, 1, %%g7\n"
-"	cas	[%0], %%g1, %%g7\n"
-"	cmp	%%g1, %%g7\n"
-"	bne,pn	%%icc, 1b\n"
-"	 addcc	%%g7, 1, %%g0\n"
-"	membar	#StoreLoad | #StoreStore\n"
-"	ble,pn	%%icc, 3f\n"
-"	 nop\n"
-"2:\n"
-"	.subsection 2\n"
-"3:	mov	%0, %%g1\n"
-"	save	%%sp, -160, %%sp\n"
-"	call	%1\n"
-"	 mov	%%g1, %%o0\n"
-"	ba,pt	%%xcc, 2b\n"
-"	 restore\n"
-"	.previous\n"
-	: : "r" (sem), "i" (__up)
-	: "g1", "g2", "g3", "g7", "memory", "cc");
-}
-
-static void __sched __down(struct semaphore * sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	while (__sem_update_count(sem, -1) <= 0) {
-		schedule();
-		tsk->state = TASK_UNINTERRUPTIBLE;
-	}
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-
-	wake_up(&sem->wait);
-}
-
-void __sched down(struct semaphore *sem)
-{
-	might_sleep();
-	/* This atomically does:
-	 * 	old_val = sem->count;
-	 *	new_val = sem->count - 1;
-	 *	sem->count = new_val;
-	 *	if (old_val < 1)
-	 *		__down(sem);
-	 *
-	 * The (old_val < 1) test is equivalent to
-	 * the more straightforward (new_val < 0),
-	 * but it is easier to test the former because
-	 * of how the CAS instruction works.
-	 */
-
-	__asm__ __volatile__("\n"
-"	! down sem(%0)\n"
-"1:	lduw	[%0], %%g1\n"
-"	sub	%%g1, 1, %%g7\n"
-"	cas	[%0], %%g1, %%g7\n"
-"	cmp	%%g1, %%g7\n"
-"	bne,pn	%%icc, 1b\n"
-"	 cmp	%%g7, 1\n"
-"	membar	#StoreLoad | #StoreStore\n"
-"	bl,pn	%%icc, 3f\n"
-"	 nop\n"
-"2:\n"
-"	.subsection 2\n"
-"3:	mov	%0, %%g1\n"
-"	save	%%sp, -160, %%sp\n"
-"	call	%1\n"
-"	 mov	%%g1, %%o0\n"
-"	ba,pt	%%xcc, 2b\n"
-"	 restore\n"
-"	.previous\n"
-	: : "r" (sem), "i" (__down)
-	: "g1", "g2", "g3", "g7", "memory", "cc");
-}
-
-int down_trylock(struct semaphore *sem)
-{
-	int ret;
-
-	/* This atomically does:
-	 * 	old_val = sem->count;
-	 *	new_val = sem->count - 1;
-	 *	if (old_val < 1) {
-	 *		ret = 1;
-	 *	} else {
-	 *		sem->count = new_val;
-	 *		ret = 0;
-	 *	}
-	 *
-	 * The (old_val < 1) test is equivalent to
-	 * the more straightforward (new_val < 0),
-	 * but it is easier to test the former because
-	 * of how the CAS instruction works.
-	 */
-
-	__asm__ __volatile__("\n"
-"	! down_trylock sem(%1) ret(%0)\n"
-"1:	lduw	[%1], %%g1\n"
-"	sub	%%g1, 1, %%g7\n"
-"	cmp	%%g1, 1\n"
-"	bl,pn	%%icc, 2f\n"
-"	 mov	1, %0\n"
-"	cas	[%1], %%g1, %%g7\n"
-"	cmp	%%g1, %%g7\n"
-"	bne,pn	%%icc, 1b\n"
-"	 mov	0, %0\n"
-"	membar	#StoreLoad | #StoreStore\n"
-"2:\n"
-	: "=&r" (ret)
-	: "r" (sem)
-	: "g1", "g7", "memory", "cc");
-
-	return ret;
-}
-
-static int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-
-	tsk->state = TASK_INTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	while (__sem_update_count(sem, -1) <= 0) {
-		if (signal_pending(current)) {
-			__sem_update_count(sem, 0);
-			retval = -EINTR;
-			break;
-		}
-		schedule();
-		tsk->state = TASK_INTERRUPTIBLE;
-	}
-	tsk->state = TASK_RUNNING;
-	remove_wait_queue(&sem->wait, &wait);
-	wake_up(&sem->wait);
-	return retval;
-}
-
-int __sched down_interruptible(struct semaphore *sem)
-{
-	int ret = 0;
-	
-	might_sleep();
-	/* This atomically does:
-	 * 	old_val = sem->count;
-	 *	new_val = sem->count - 1;
-	 *	sem->count = new_val;
-	 *	if (old_val < 1)
-	 *		ret = __down_interruptible(sem);
-	 *
-	 * The (old_val < 1) test is equivalent to
-	 * the more straightforward (new_val < 0),
-	 * but it is easier to test the former because
-	 * of how the CAS instruction works.
-	 */
-
-	__asm__ __volatile__("\n"
-"	! down_interruptible sem(%2) ret(%0)\n"
-"1:	lduw	[%2], %%g1\n"
-"	sub	%%g1, 1, %%g7\n"
-"	cas	[%2], %%g1, %%g7\n"
-"	cmp	%%g1, %%g7\n"
-"	bne,pn	%%icc, 1b\n"
-"	 cmp	%%g7, 1\n"
-"	membar	#StoreLoad | #StoreStore\n"
-"	bl,pn	%%icc, 3f\n"
-"	 nop\n"
-"2:\n"
-"	.subsection 2\n"
-"3:	mov	%2, %%g1\n"
-"	save	%%sp, -160, %%sp\n"
-"	call	%3\n"
-"	 mov	%%g1, %%o0\n"
-"	ba,pt	%%xcc, 2b\n"
-"	 restore\n"
-"	.previous\n"
-	: "=r" (ret)
-	: "0" (ret), "r" (sem), "i" (__down_interruptible)
-	: "g1", "g2", "g3", "g7", "memory", "cc");
-	return ret;
-}
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index d036dbe72864..6acb4c51cfe4 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -51,6 +51,8 @@
 #include <net/ipconfig.h>
 #endif
 
+#include "entry.h"
+
 /* Used to synchronize accesses to NatSemi SUPER I/O chip configure
  * operations in asm/ns87303.h
  */
@@ -335,9 +337,6 @@ void __init setup_arch(char **cmdline_p)
 
 /* BUFFER is PAGE_SIZE bytes long. */
 
-extern char *sparc_cpu_type;
-extern char *sparc_fpu_type;
-
 extern void smp_info(struct seq_file *);
 extern void smp_bogo(struct seq_file *);
 extern void mmu_info(struct seq_file *);
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index fb13775b3682..1c47009eb5ec 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -25,13 +25,15 @@
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
-#include <asm/svr4.h>
 #include <asm/pgtable.h>
 #include <asm/fpumacro.h>
 #include <asm/uctx.h>
 #include <asm/siginfo.h>
 #include <asm/visasm.h>
 
+#include "entry.h"
+#include "systbls.h"
+
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
 /* {set, get}context() needed for 64-bit SparcLinux userland. */
@@ -354,7 +356,7 @@ static int invalid_frame_pointer(void __user *fp, int fplen)
 static inline int
 save_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
 {
-	unsigned long *fpregs = (unsigned long *)(regs+1);
+	unsigned long *fpregs = current_thread_info()->fpregs;
 	unsigned long fprs;
 	int err = 0;
 	
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 8c1c121330fb..74e0512f135c 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -23,7 +23,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
-#include <asm/svr4.h>
 #include <asm/pgtable.h>
 #include <asm/psrcompat.h>
 #include <asm/fpumacro.h>
@@ -798,281 +797,6 @@ sigsegv:
 	force_sigsegv(signo, current);
 }
 
-/* Setup a Solaris stack frame */
-static void
-setup_svr4_frame32(struct sigaction *sa, unsigned long pc, unsigned long npc,
-		   struct pt_regs *regs, int signr, sigset_t *oldset)
-{
-	svr4_signal_frame_t __user *sfp;
-	svr4_gregset_t  __user *gr;
-	svr4_siginfo_t  __user *si;
-	svr4_mcontext_t __user *mc;
-	svr4_gwindows_t __user *gw;
-	svr4_ucontext_t __user *uc;
-	svr4_sigset_t setv;
-	unsigned int psr;
-	int i, err;
-
-	synchronize_user_stack();
-	save_and_clear_fpu();
-	
-	regs->u_regs[UREG_FP] &= 0x00000000ffffffffUL;
-	sfp = (svr4_signal_frame_t __user *)
-		get_sigframe(sa, regs,
-			     sizeof(struct reg_window32) + SVR4_SF_ALIGNED);
-
-	if (invalid_frame_pointer(sfp, sizeof(*sfp)))
-		do_exit(SIGILL);
-
-	/* Start with a clean frame pointer and fill it */
-	err = clear_user(sfp, sizeof(*sfp));
-
-	/* Setup convenience variables */
-	si = &sfp->si;
-	uc = &sfp->uc;
-	gw = &sfp->gw;
-	mc = &uc->mcontext;
-	gr = &mc->greg;
-	
-	/* FIXME: where am I supposed to put this?
-	 * sc->sigc_onstack = old_status;
-	 * anyways, it does not look like it is used for anything at all.
-	 */
-	setv.sigbits[0] = oldset->sig[0];
-	setv.sigbits[1] = (oldset->sig[0] >> 32);
-	if (_NSIG_WORDS >= 2) {
-		setv.sigbits[2] = oldset->sig[1];
-		setv.sigbits[3] = (oldset->sig[1] >> 32);
-		err |= __copy_to_user(&uc->sigmask, &setv, sizeof(svr4_sigset_t));
-	} else
-		err |= __copy_to_user(&uc->sigmask, &setv,
-				      2 * sizeof(unsigned int));
-	
-	/* Store registers */
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-	err |= __put_user(regs->tpc, &((*gr)[SVR4_PC]));
-	err |= __put_user(regs->tnpc, &((*gr)[SVR4_NPC]));
-	psr = tstate_to_psr(regs->tstate);
-	if (current_thread_info()->fpsaved[0] & FPRS_FEF)
-		psr |= PSR_EF;
-	err |= __put_user(psr, &((*gr)[SVR4_PSR]));
-	err |= __put_user(regs->y, &((*gr)[SVR4_Y]));
-	
-	/* Copy g[1..7] and o[0..7] registers */
-	for (i = 0; i < 7; i++)
-		err |= __put_user(regs->u_regs[UREG_G1+i], (&(*gr)[SVR4_G1])+i);
-	for (i = 0; i < 8; i++)
-		err |= __put_user(regs->u_regs[UREG_I0+i], (&(*gr)[SVR4_O0])+i);
-
-	/* Setup sigaltstack */
-	err |= __put_user(current->sas_ss_sp, &uc->stack.sp);
-	err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &uc->stack.flags);
-	err |= __put_user(current->sas_ss_size, &uc->stack.size);
-
-	/* Save the currently window file: */
-
-	/* 1. Link sfp->uc->gwins to our windows */
-	err |= __put_user(ptr_to_compat(gw), &mc->gwin);
-	    
-	/* 2. Number of windows to restore at setcontext (): */
-	err |= __put_user(get_thread_wsaved(), &gw->count);
-
-	/* 3. We just pay attention to the gw->count field on setcontext */
-	set_thread_wsaved(0); /* So process is allowed to execute. */
-
-	/* Setup the signal information.  Solaris expects a bunch of
-	 * information to be passed to the signal handler, we don't provide
-	 * that much currently, should use siginfo.
-	 */
-	err |= __put_user(signr, &si->siginfo.signo);
-	err |= __put_user(SVR4_SINOINFO, &si->siginfo.code);
-	if (err)
-		goto sigsegv;
-
-	regs->u_regs[UREG_FP] = (unsigned long) sfp;
-	regs->tpc = (unsigned long) sa->sa_handler;
-	regs->tnpc = (regs->tpc + 4);
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-
-	/* Arguments passed to signal handler */
-	if (regs->u_regs[14]){
-		struct reg_window32 __user *rw = (struct reg_window32 __user *)
-			(regs->u_regs[14] & 0x00000000ffffffffUL);
-
-		err |= __put_user(signr, &rw->ins[0]);
-		err |= __put_user((u64)si, &rw->ins[1]);
-		err |= __put_user((u64)uc, &rw->ins[2]);
-		err |= __put_user((u64)sfp, &rw->ins[6]);	/* frame pointer */
-		if (err)
-			goto sigsegv;
-
-		regs->u_regs[UREG_I0] = signr;
-		regs->u_regs[UREG_I1] = (u32)(u64) si;
-		regs->u_regs[UREG_I2] = (u32)(u64) uc;
-	}
-	return;
-
-sigsegv:
-	force_sigsegv(signr, current);
-}
-
-asmlinkage int
-svr4_getcontext(svr4_ucontext_t __user *uc, struct pt_regs *regs)
-{
-	svr4_gregset_t  __user *gr;
-	svr4_mcontext_t __user *mc;
-	svr4_sigset_t setv;
-	int i, err;
-	u32 psr;
-
-	synchronize_user_stack();
-	save_and_clear_fpu();
-	
-	if (get_thread_wsaved())
-		do_exit(SIGSEGV);
-
-	err = clear_user(uc, sizeof(*uc));
-
-	/* Setup convenience variables */
-	mc = &uc->mcontext;
-	gr = &mc->greg;
-
-	setv.sigbits[0] = current->blocked.sig[0];
-	setv.sigbits[1] = (current->blocked.sig[0] >> 32);
-	if (_NSIG_WORDS >= 2) {
-		setv.sigbits[2] = current->blocked.sig[1];
-		setv.sigbits[3] = (current->blocked.sig[1] >> 32);
-		err |= __copy_to_user(&uc->sigmask, &setv, sizeof(svr4_sigset_t));
-	} else
-		err |= __copy_to_user(&uc->sigmask, &setv, 2 * sizeof(unsigned));
-
-	/* Store registers */
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-	err |= __put_user(regs->tpc, &uc->mcontext.greg[SVR4_PC]);
-	err |= __put_user(regs->tnpc, &uc->mcontext.greg[SVR4_NPC]);
-
-	psr = tstate_to_psr(regs->tstate) & ~PSR_EF;		   
-	if (current_thread_info()->fpsaved[0] & FPRS_FEF)
-		psr |= PSR_EF;
-	err |= __put_user(psr, &uc->mcontext.greg[SVR4_PSR]);
-
-	err |= __put_user(regs->y, &uc->mcontext.greg[SVR4_Y]);
-	
-	/* Copy g[1..7] and o[0..7] registers */
-	for (i = 0; i < 7; i++)
-		err |= __put_user(regs->u_regs[UREG_G1+i], (&(*gr)[SVR4_G1])+i);
-	for (i = 0; i < 8; i++)
-		err |= __put_user(regs->u_regs[UREG_I0+i], (&(*gr)[SVR4_O0])+i);
-
-	/* Setup sigaltstack */
-	err |= __put_user(current->sas_ss_sp, &uc->stack.sp);
-	err |= __put_user(sas_ss_flags(regs->u_regs[UREG_FP]), &uc->stack.flags);
-	err |= __put_user(current->sas_ss_size, &uc->stack.size);
-
-	/* The register file is not saved
-	 * we have already stuffed all of it with sync_user_stack
-	 */
-	return (err ? -EFAULT : 0);
-}
-
-
-/* Set the context for a svr4 application, this is Solaris way to sigreturn */
-asmlinkage int svr4_setcontext(svr4_ucontext_t __user *c, struct pt_regs *regs)
-{
-	svr4_gregset_t  __user *gr;
-	mm_segment_t old_fs;
-	u32 pc, npc, psr, u_ss_sp;
-	sigset_t set;
-	svr4_sigset_t setv;
-	int i, err;
-	stack_t st;
-	
-	/* Fixme: restore windows, or is this already taken care of in
-	 * svr4_setup_frame when sync_user_windows is done?
-	 */
-	flush_user_windows();
-	
-	if (get_thread_wsaved())
-		goto sigsegv;
-
-	if (((unsigned long) c) & 3){
-		printk("Unaligned structure passed\n");
-		goto sigsegv;
-	}
-
-	if (!__access_ok(c, sizeof(*c))) {
-		/* Miguel, add nice debugging msg _here_. ;-) */
-		goto sigsegv;
-	}
-
-	/* Check for valid PC and nPC */
-	gr = &c->mcontext.greg;
-	err = __get_user(pc, &((*gr)[SVR4_PC]));
-	err |= __get_user(npc, &((*gr)[SVR4_NPC]));
-	if ((pc | npc) & 3)
-		goto sigsegv;
-	
-	/* Retrieve information from passed ucontext */
-	/* note that nPC is ored a 1, this is used to inform entry.S */
-	/* that we don't want it to mess with our PC and nPC */
-	
-	err |= copy_from_user(&setv, &c->sigmask, sizeof(svr4_sigset_t));
-	set.sig[0] = setv.sigbits[0] | (((long)setv.sigbits[1]) << 32);
-	if (_NSIG_WORDS >= 2)
-		set.sig[1] = setv.sigbits[2] | (((long)setv.sigbits[3]) << 32);
-	
-	err |= __get_user(u_ss_sp, &c->stack.sp);
-	st.ss_sp = compat_ptr(u_ss_sp);
-	err |= __get_user(st.ss_flags, &c->stack.flags);
-	err |= __get_user(st.ss_size, &c->stack.size);
-	if (err)
-		goto sigsegv;
-		
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	do_sigaltstack((stack_t __user *) &st, NULL, regs->u_regs[UREG_I6]);
-	set_fs(old_fs);
-	
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	regs->tpc = pc;
-	regs->tnpc = npc | 1;
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-	err |= __get_user(regs->y, &((*gr)[SVR4_Y]));
-	err |= __get_user(psr, &((*gr)[SVR4_PSR]));
-	regs->tstate &= ~(TSTATE_ICC|TSTATE_XCC);
-	regs->tstate |= psr_to_tstate_icc(psr);
-
-	/* Restore g[1..7] and o[0..7] registers */
-	for (i = 0; i < 7; i++)
-		err |= __get_user(regs->u_regs[UREG_G1+i], (&(*gr)[SVR4_G1])+i);
-	for (i = 0; i < 8; i++)
-		err |= __get_user(regs->u_regs[UREG_I0+i], (&(*gr)[SVR4_O0])+i);
-	if (err)
-		goto sigsegv;
-
-	return -EINTR;
-sigsegv:
-	return -EFAULT;
-}
-
 static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
 			     unsigned long signr, sigset_t *oldset,
 			     siginfo_t *info)
@@ -1216,20 +940,14 @@ sigsegv:
 
 static inline void handle_signal32(unsigned long signr, struct k_sigaction *ka,
 				   siginfo_t *info,
-				   sigset_t *oldset, struct pt_regs *regs,
-				   int svr4_signal)
+				   sigset_t *oldset, struct pt_regs *regs)
 {
-	if (svr4_signal)
-		setup_svr4_frame32(&ka->sa, regs->tpc, regs->tnpc,
-				   regs, signr, oldset);
-	else {
-		if (ka->sa.sa_flags & SA_SIGINFO)
-			setup_rt_frame32(ka, regs, signr, oldset, info);
-		else if (test_thread_flag(TIF_NEWSIGNALS))
-			new_setup_frame32(ka, regs, signr, oldset);
-		else
-			setup_frame32(&ka->sa, regs, signr, oldset, info);
-	}
+	if (ka->sa.sa_flags & SA_SIGINFO)
+		setup_rt_frame32(ka, regs, signr, oldset, info);
+	else if (test_thread_flag(TIF_NEWSIGNALS))
+		new_setup_frame32(ka, regs, signr, oldset);
+	else
+		setup_frame32(&ka->sa, regs, signr, oldset, info);
 	spin_lock_irq(&current->sighand->siglock);
 	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
 	if (!(ka->sa.sa_flags & SA_NOMASK))
@@ -1270,7 +988,6 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 	struct signal_deliver_cookie cookie;
 	struct k_sigaction ka;
 	int signr;
-	int svr4_signal = current->personality == PER_SVR4;
 	
 	cookie.restart_syscall = restart_syscall;
 	cookie.orig_i0 = orig_i0;
@@ -1279,8 +996,7 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 	if (signr > 0) {
 		if (cookie.restart_syscall)
 			syscall_restart32(orig_i0, regs, &ka.sa);
-		handle_signal32(signr, &ka, &info, oldset,
-				regs, svr4_signal);
+		handle_signal32(signr, &ka, &info, oldset, regs);
 
 		/* a signal was successfully delivered; the saved
 		 * sigmask will have been stored in the signal frame,
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index cc454731d879..59f020d69d4c 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1,6 +1,6 @@
 /* smp.c: Sparc64 SMP support.
  *
- * Copyright (C) 1997, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997, 2007, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/module.h>
@@ -30,6 +30,7 @@
 #include <asm/cpudata.h>
 #include <asm/hvtramp.h>
 #include <asm/io.h>
+#include <asm/timer.h>
 
 #include <asm/irq.h>
 #include <asm/irq_regs.h>
@@ -284,14 +285,17 @@ static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
 {
 	extern unsigned long sparc64_ttable_tl0;
 	extern unsigned long kern_locked_tte_data;
-	extern int bigkernel;
 	struct hvtramp_descr *hdesc;
 	unsigned long trampoline_ra;
 	struct trap_per_cpu *tb;
 	u64 tte_vaddr, tte_data;
 	unsigned long hv_err;
+	int i;
 
-	hdesc = kzalloc(sizeof(*hdesc), GFP_KERNEL);
+	hdesc = kzalloc(sizeof(*hdesc) +
+			(sizeof(struct hvtramp_mapping) *
+			 num_kernel_image_mappings - 1),
+			GFP_KERNEL);
 	if (!hdesc) {
 		printk(KERN_ERR "ldom_startcpu_cpuid: Cannot allocate "
 		       "hvtramp_descr.\n");
@@ -299,7 +303,7 @@ static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
 	}
 
 	hdesc->cpu = cpu;
-	hdesc->num_mappings = (bigkernel ? 2 : 1);
+	hdesc->num_mappings = num_kernel_image_mappings;
 
 	tb = &trap_block[cpu];
 	tb->hdesc = hdesc;
@@ -312,13 +316,11 @@ static void ldom_startcpu_cpuid(unsigned int cpu, unsigned long thread_reg)
 	tte_vaddr = (unsigned long) KERNBASE;
 	tte_data = kern_locked_tte_data;
 
-	hdesc->maps[0].vaddr = tte_vaddr;
-	hdesc->maps[0].tte   = tte_data;
-	if (bigkernel) {
+	for (i = 0; i < hdesc->num_mappings; i++) {
+		hdesc->maps[i].vaddr = tte_vaddr;
+		hdesc->maps[i].tte   = tte_data;
 		tte_vaddr += 0x400000;
 		tte_data  += 0x400000;
-		hdesc->maps[1].vaddr = tte_vaddr;
-		hdesc->maps[1].tte   = tte_data;
 	}
 
 	trampoline_ra = kimage_addr_to_ra(hv_cpu_startup);
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 51fa773f38c9..38736460b8db 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -33,13 +33,11 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/idprom.h>
-#include <asm/svr4.h>
 #include <asm/elf.h>
 #include <asm/head.h>
 #include <asm/smp.h>
 #include <asm/mostek.h>
 #include <asm/ptrace.h>
-#include <asm/user.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
 #include <asm/fpumacro.h>
@@ -73,13 +71,8 @@ extern __kernel_size_t strlen(const char *);
 extern void linux_sparc_syscall(void);
 extern void rtrap(void);
 extern void show_regs(struct pt_regs *);
-extern void solaris_syscall(void);
 extern void syscall_trace(struct pt_regs *, int);
-extern u32 sunos_sys_table[], sys_call_table32[];
-extern void tl0_solaris(void);
 extern void sys_sigsuspend(void);
-extern int svr4_getcontext(svr4_ucontext_t *uc, struct pt_regs *regs);
-extern int svr4_setcontext(svr4_ucontext_t *uc, struct pt_regs *regs);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
 extern int (*handle_mathemu)(struct pt_regs *, struct fpustate *);
 extern long sparc32_open(const char __user * filename, int flags, int mode);
@@ -90,8 +83,6 @@ extern int __ashrdi3(int, int);
 
 extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs);
 
-extern unsigned int sys_call_table[];
-
 extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
 extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
 		      unsigned long *);
@@ -130,12 +121,6 @@ EXPORT_SYMBOL(_mcount);
 
 EXPORT_SYMBOL(sparc64_get_clock_tick);
 
-/* semaphores */
-EXPORT_SYMBOL(down);
-EXPORT_SYMBOL(down_trylock);
-EXPORT_SYMBOL(down_interruptible);
-EXPORT_SYMBOL(up);
-
 /* RW semaphores */
 EXPORT_SYMBOL(__down_read);
 EXPORT_SYMBOL(__down_read_trylock);
@@ -219,11 +204,6 @@ EXPORT_SYMBOL(pci_dma_supported);
 /* I/O device mmaping on Sparc64. */
 EXPORT_SYMBOL(io_remap_pfn_range);
 
-#if defined(CONFIG_COMPAT) && defined(CONFIG_NET)
-/* Solaris/SunOS binary compatibility */
-EXPORT_SYMBOL(verify_compat_iovec);
-#endif
-
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(put_fs_struct);
 
@@ -260,30 +240,6 @@ EXPORT_SYMBOL(strlen);
 EXPORT_SYMBOL(__strlen_user);
 EXPORT_SYMBOL(__strnlen_user);
 
-#ifdef CONFIG_SOLARIS_EMUL_MODULE
-EXPORT_SYMBOL(linux_sparc_syscall);
-EXPORT_SYMBOL(rtrap);
-EXPORT_SYMBOL(show_regs);
-EXPORT_SYMBOL(solaris_syscall);
-EXPORT_SYMBOL(syscall_trace);
-EXPORT_SYMBOL(sunos_sys_table);
-EXPORT_SYMBOL(sys_call_table32);
-EXPORT_SYMBOL(tl0_solaris);
-EXPORT_SYMBOL(sys_sigsuspend);
-EXPORT_SYMBOL(sys_getppid);
-EXPORT_SYMBOL(sys_getpid);
-EXPORT_SYMBOL(sys_geteuid);
-EXPORT_SYMBOL(sys_getuid);
-EXPORT_SYMBOL(sys_getegid);
-EXPORT_SYMBOL(sysctl_nr_open);
-EXPORT_SYMBOL(sys_getgid);
-EXPORT_SYMBOL(svr4_getcontext);
-EXPORT_SYMBOL(svr4_setcontext);
-EXPORT_SYMBOL(compat_sys_ioctl);
-EXPORT_SYMBOL(sys_ioctl);
-EXPORT_SYMBOL(sparc32_open);
-#endif
-
 /* Special internal versions of library functions. */
 EXPORT_SYMBOL(_clear_page);
 EXPORT_SYMBOL(clear_user_page);
@@ -340,9 +296,6 @@ EXPORT_SYMBOL(do_BUG);
 /* for ns8703 */
 EXPORT_SYMBOL(ns87303_lock);
 
-/* for solaris compat module */
-EXPORT_SYMBOL_GPL(sys_call_table);
-
 EXPORT_SYMBOL(tick_ops);
 
 EXPORT_SYMBOL(xor_vis_2);
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 47f92a59be18..84d39e873e88 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -2,13 +2,15 @@
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
 #include <asm/ptrace.h>
+#include <asm/stacktrace.h>
 
 void save_stack_trace(struct stack_trace *trace)
 {
 	unsigned long ksp, fp, thread_base;
 	struct thread_info *tp = task_thread_info(current);
 
-	flushw_all();
+	stack_trace_flush();
+
 	__asm__ __volatile__(
 		"mov	%%fp, %0"
 		: "=r" (ksp)
diff --git a/arch/sparc64/kernel/sunos_ioctl32.c b/arch/sparc64/kernel/sunos_ioctl32.c
deleted file mode 100644
index 75d2bad49839..000000000000
--- a/arch/sparc64/kernel/sunos_ioctl32.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/* $Id: sunos_ioctl32.c,v 1.11 2000/07/30 23:12:24 davem Exp $
- * sunos_ioctl32.c: SunOS ioctl compatibility on sparc64.
- *
- * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
- * Copyright (C) 1995, 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <asm/uaccess.h>
-
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/termios.h>
-#include <linux/tty.h>
-#include <linux/ioctl.h>
-#include <linux/route.h>
-#include <linux/sockios.h>
-#include <linux/if.h>
-#include <linux/netdevice.h>
-#include <linux/if_arp.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/compat.h>
-
-#define SUNOS_NR_OPEN	256
-
-struct rtentry32 {
-        u32   		rt_pad1;
-        struct sockaddr rt_dst;         /* target address               */
-        struct sockaddr rt_gateway;     /* gateway addr (RTF_GATEWAY)   */
-        struct sockaddr rt_genmask;     /* target network mask (IP)     */
-        unsigned short  rt_flags;
-        short           rt_pad2;
-        u32   		rt_pad3;
-        unsigned char   rt_tos;
-        unsigned char   rt_class;
-        short           rt_pad4;
-        short           rt_metric;      /* +1 for binary compatibility! */
-        /* char * */ u32 rt_dev;        /* forcing the device at add    */
-        u32   		rt_mtu;         /* per route MTU/Window         */
-        u32   		rt_window;      /* Window clamping              */
-        unsigned short  rt_irtt;        /* Initial RTT                  */
-
-};
-
-struct ifmap32 {
-	u32 mem_start;
-	u32 mem_end;
-	unsigned short base_addr;
-	unsigned char irq;
-	unsigned char dma;
-	unsigned char port;
-};
-
-struct ifreq32 {
-#define IFHWADDRLEN     6
-#define IFNAMSIZ        16
-        union {
-                char    ifrn_name[IFNAMSIZ];            /* if name, e.g. "en0" */
-        } ifr_ifrn;
-        union {
-                struct  sockaddr ifru_addr;
-                struct  sockaddr ifru_dstaddr;
-                struct  sockaddr ifru_broadaddr;
-                struct  sockaddr ifru_netmask;
-                struct  sockaddr ifru_hwaddr;
-                short   ifru_flags;
-                int     ifru_ivalue;
-                int     ifru_mtu;
-                struct  ifmap32 ifru_map;
-                char    ifru_slave[IFNAMSIZ];   /* Just fits the size */
-                compat_caddr_t ifru_data;
-        } ifr_ifru;
-};
-
-struct ifconf32 {
-        int     ifc_len;                        /* size of buffer       */
-        compat_caddr_t  ifcbuf;
-};
-
-extern asmlinkage int compat_sys_ioctl(unsigned int, unsigned int, u32);
-
-asmlinkage int sunos_ioctl (int fd, u32 cmd, u32 arg)
-{
-	int ret = -EBADF;
-
-	if(fd >= SUNOS_NR_OPEN)
-		goto out;
-	if(!fcheck(fd))
-		goto out;
-
-	if(cmd == TIOCSETD) {
-		mm_segment_t old_fs = get_fs();
-		int __user *p;
-		int ntty = N_TTY;
-		int tmp;
-
-		p = (int __user *) (unsigned long) arg;
-		ret = -EFAULT;
-		if(get_user(tmp, p))
-			goto out;
-		if(tmp == 2) {
-			set_fs(KERNEL_DS);
-			ret = sys_ioctl(fd, cmd, (unsigned long) &ntty);
-			set_fs(old_fs);
-			ret = (ret == -EINVAL ? -EOPNOTSUPP : ret);
-			goto out;
-		}
-	}
-	if(cmd == TIOCNOTTY) {
-		ret = sys_setsid();
-		goto out;
-	}
-	switch(cmd) {
-	case _IOW('r', 10, struct rtentry32):
-		ret = compat_sys_ioctl(fd, SIOCADDRT, arg);
-		goto out;
-	case _IOW('r', 11, struct rtentry32):
-		ret = compat_sys_ioctl(fd, SIOCDELRT, arg);
-		goto out;
-
-	case _IOW('i', 12, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFADDR, arg);
-		goto out;
-	case _IOWR('i', 13, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFADDR, arg);
-		goto out;
-	case _IOW('i', 14, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFDSTADDR, arg);
-		goto out;
-	case _IOWR('i', 15, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFDSTADDR, arg);
-		goto out;
-	case _IOW('i', 16, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFFLAGS, arg);
-		goto out;
-	case _IOWR('i', 17, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFFLAGS, arg);
-		goto out;
-	case _IOW('i', 18, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFMEM, arg);
-		goto out;
-	case _IOWR('i', 19, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFMEM, arg);
-		goto out;
-
-	case _IOWR('i', 20, struct ifconf32):
-		ret = compat_sys_ioctl(fd, SIOCGIFCONF, arg);
-		goto out;
-
-	case _IOW('i', 21, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFMTU, arg);
-		goto out;
-
-	case _IOWR('i', 22, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFMTU, arg);
-		goto out;
-
-	case _IOWR('i', 23, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFBRDADDR, arg);
-		goto out;
-	case _IOW('i', 24, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFBRDADDR, arg);
-		goto out;
-	case _IOWR('i', 25, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFNETMASK, arg);
-		goto out;
-	case _IOW('i', 26, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFNETMASK, arg);
-		goto out;
-	case _IOWR('i', 27, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCGIFMETRIC, arg);
-		goto out;
-	case _IOW('i', 28, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCSIFMETRIC, arg);
-		goto out;
-
-	case _IOW('i', 30, struct arpreq):
-		ret = compat_sys_ioctl(fd, SIOCSARP, arg);
-		goto out;
-	case _IOWR('i', 31, struct arpreq):
-		ret = compat_sys_ioctl(fd, SIOCGARP, arg);
-		goto out;
-	case _IOW('i', 32, struct arpreq):
-		ret = compat_sys_ioctl(fd, SIOCDARP, arg);
-		goto out;
-
-	case _IOW('i', 40, struct ifreq32): /* SIOCUPPER */
-	case _IOW('i', 41, struct ifreq32): /* SIOCLOWER */
-	case _IOW('i', 44, struct ifreq32): /* SIOCSETSYNC */
-	case _IOW('i', 45, struct ifreq32): /* SIOCGETSYNC */
-	case _IOW('i', 46, struct ifreq32): /* SIOCSSDSTATS */
-	case _IOW('i', 47, struct ifreq32): /* SIOCSSESTATS */
-	case _IOW('i', 48, struct ifreq32): /* SIOCSPROMISC */
-		ret = -EOPNOTSUPP;
-		goto out;
-
-	case _IOW('i', 49, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCADDMULTI, arg);
-		goto out;
-	case _IOW('i', 50, struct ifreq32):
-		ret = compat_sys_ioctl(fd, SIOCDELMULTI, arg);
-		goto out;
-
-	/* FDDI interface ioctls, unsupported. */
-		
-	case _IOW('i', 51, struct ifreq32): /* SIOCFDRESET */
-	case _IOW('i', 52, struct ifreq32): /* SIOCFDSLEEP */
-	case _IOW('i', 53, struct ifreq32): /* SIOCSTRTFMWAR */
-	case _IOW('i', 54, struct ifreq32): /* SIOCLDNSTRTFW */
-	case _IOW('i', 55, struct ifreq32): /* SIOCGETFDSTAT */
-	case _IOW('i', 56, struct ifreq32): /* SIOCFDNMIINT */
-	case _IOW('i', 57, struct ifreq32): /* SIOCFDEXUSER */
-	case _IOW('i', 58, struct ifreq32): /* SIOCFDGNETMAP */
-	case _IOW('i', 59, struct ifreq32): /* SIOCFDGIOCTL */
-		printk("FDDI ioctl, returning EOPNOTSUPP\n");
-		ret = -EOPNOTSUPP;
-		goto out;
-
-	case _IOW('t', 125, int):
-		/* More stupid tty sunos ioctls, just
-		 * say it worked.
-		 */
-		ret = 0;
-		goto out;
-
-	/* Non posix grp */
-	case _IOW('t', 118, int): {
-		int oldval, newval, __user *ptr;
-
-		cmd = TIOCSPGRP;
-		ptr = (int __user *) (unsigned long) arg;
-		ret = -EFAULT;
-		if(get_user(oldval, ptr))
-			goto out;
-		ret = compat_sys_ioctl(fd, cmd, arg);
-		__get_user(newval, ptr);
-		if(newval == -1) {
-			__put_user(oldval, ptr);
-			ret = -EIO;
-		}
-		if(ret == -ENOTTY)
-			ret = -EIO;
-		goto out;
-	}
-
-	case _IOR('t', 119, int): {
-		int oldval, newval, __user *ptr;
-
-		cmd = TIOCGPGRP;
-		ptr = (int __user *) (unsigned long) arg;
-		ret = -EFAULT;
-		if(get_user(oldval, ptr))
-			goto out;
-		ret = compat_sys_ioctl(fd, cmd, arg);
-		__get_user(newval, ptr);
-		if(newval == -1) {
-			__put_user(oldval, ptr);
-			ret = -EIO;
-		}
-		if(ret == -ENOTTY)
-			ret = -EIO;
-		goto out;
-	}
-	};
-
-	ret = compat_sys_ioctl(fd, cmd, arg);
-	/* so stupid... */
-	ret = (ret == -EINVAL ? -EOPNOTSUPP : ret);
-out:
-	return ret;
-}
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 134d801579f9..73ed01ba40dc 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -1,5 +1,4 @@
-/* $Id: sys_sparc.c,v 1.57 2002/02/09 19:49:30 davem Exp $
- * linux/arch/sparc64/kernel/sys_sparc.c
+/* linux/arch/sparc64/kernel/sys_sparc.c
  *
  * This file contains various random system calls that
  * have a non-standard calling sequence on the Linux/sparc
@@ -30,6 +29,9 @@
 #include <asm/perfctr.h>
 #include <asm/unistd.h>
 
+#include "entry.h"
+#include "systbls.h"
+
 /* #define DEBUG_UNIMP_SYSCALL */
 
 asmlinkage unsigned long sys_getpagesize(void)
@@ -445,7 +447,8 @@ asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second,
 			goto out;
 		case SEMTIMEDOP:
 			err = sys_semtimedop(first, ptr, (unsigned)second,
-				(const struct timespec __user *) fifth);
+				(const struct timespec __user *)
+					     (unsigned long) fifth);
 			goto out;
 		case SEMGET:
 			err = sys_semget(first, (int)second, (int)third);
@@ -717,44 +720,6 @@ out:
 	return err;
 }
 
-asmlinkage long solaris_syscall(struct pt_regs *regs)
-{
-	static int count;
-
-	regs->tpc = regs->tnpc;
-	regs->tnpc += 4;
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-	if (++count <= 5) {
-		printk ("For Solaris binary emulation you need solaris module loaded\n");
-		show_regs (regs);
-	}
-	send_sig(SIGSEGV, current, 1);
-
-	return -ENOSYS;
-}
-
-#ifndef CONFIG_SUNOS_EMUL
-asmlinkage long sunos_syscall(struct pt_regs *regs)
-{
-	static int count;
-
-	regs->tpc = regs->tnpc;
-	regs->tnpc += 4;
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-	if (++count <= 20)
-		printk ("SunOS binary emulation not compiled in\n");
-	force_sig(SIGSEGV, current);
-
-	return -ENOSYS;
-}
-#endif
-
 asmlinkage long sys_utrap_install(utrap_entry_t type,
 				  utrap_handler_t new_p,
 				  utrap_handler_t new_d,
@@ -788,7 +753,7 @@ asmlinkage long sys_utrap_install(utrap_entry_t type,
 	} else {
 		if ((utrap_handler_t)current_thread_info()->utraps[type] != new_p &&
 		    current_thread_info()->utraps[0] > 1) {
-			long *p = current_thread_info()->utraps;
+			unsigned long *p = current_thread_info()->utraps;
 
 			current_thread_info()->utraps =
 				kmalloc((UT_TRAP_INSTRUCTION_31+1)*sizeof(long),
@@ -816,7 +781,8 @@ asmlinkage long sys_utrap_install(utrap_entry_t type,
 	return 0;
 }
 
-long sparc_memory_ordering(unsigned long model, struct pt_regs *regs)
+asmlinkage long sparc_memory_ordering(unsigned long model,
+				      struct pt_regs *regs)
 {
 	if (model >= 3)
 		return -EINVAL;
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index deaba2bd0535..c1a61e98899a 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -55,7 +55,6 @@
 #include <asm/types.h>
 #include <asm/uaccess.h>
 #include <asm/fpumacro.h>
-#include <asm/semaphore.h>
 #include <asm/mmu_context.h>
 #include <asm/compat_signal.h>
 
@@ -678,9 +677,6 @@ asmlinkage long sparc32_execve(struct pt_regs *regs)
 		current_thread_info()->xfsr[0] = 0;
 		current_thread_info()->fpsaved[0] = 0;
 		regs->tstate &= ~TSTATE_PEF;
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
 	}
 out:
 	return error;
diff --git a/arch/sparc64/kernel/sys_sunos32.c b/arch/sparc64/kernel/sys_sunos32.c
deleted file mode 100644
index cfc22d3fe54c..000000000000
--- a/arch/sparc64/kernel/sys_sunos32.c
+++ /dev/null
@@ -1,1359 +0,0 @@
-/* $Id: sys_sunos32.c,v 1.64 2002/02/09 19:49:31 davem Exp $
- * sys_sunos32.c: SunOS binary compatibility layer on sparc64.
- *
- * Copyright (C) 1995, 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
- *
- * Based upon preliminary work which is:
- *
- * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/capability.h>
-#include <linux/compat.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/resource.h>
-#include <linux/ipc.h>
-#include <linux/shm.h>
-#include <linux/msg.h>
-#include <linux/sem.h>
-#include <linux/signal.h>
-#include <linux/uio.h>
-#include <linux/utsname.h>
-#include <linux/major.h>
-#include <linux/stat.h>
-#include <linux/slab.h>
-#include <linux/pagemap.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/syscalls.h>
-
-#include <asm/uaccess.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/pconf.h>
-#include <asm/idprom.h> /* for gethostid() */
-#include <asm/unistd.h>
-#include <asm/system.h>
-#include <asm/compat_signal.h>
-
-/* For the nfs mount emulation */
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/nfs.h>
-#include <linux/nfs2.h>
-#include <linux/nfs_mount.h>
-
-/* for sunos_select */
-#include <linux/time.h>
-#include <linux/personality.h>
-
-/* For SOCKET_I */
-#include <net/sock.h>
-#include <net/compat.h>
-
-#define SUNOS_NR_OPEN	256
-
-asmlinkage u32 sunos_mmap(u32 addr, u32 len, u32 prot, u32 flags, u32 fd, u32 off)
-{
-	struct file *file = NULL;
-	unsigned long retval, ret_type;
-
-	if (flags & MAP_NORESERVE) {
-		static int cnt;
-		if (cnt++ < 10)
-			printk("%s:  unimplemented SunOS MAP_NORESERVE mmap() flag\n",
-			       current->comm);
-		flags &= ~MAP_NORESERVE;
-	}
-	retval = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		struct inode * inode;
-		if (fd >= SUNOS_NR_OPEN)
-			goto out;
- 		file = fget(fd);
-		if (!file)
-			goto out;
-		inode = file->f_path.dentry->d_inode;
-		if (imajor(inode) == MEM_MAJOR && iminor(inode) == 5) {
-			flags |= MAP_ANONYMOUS;
-			fput(file);
-			file = NULL;
-		}
-	}
-
-	retval = -EINVAL;
-	if (!(flags & MAP_FIXED))
-		addr = 0;
-	else if (len > 0xf0000000 || addr > 0xf0000000 - len)
-		goto out_putf;
-	ret_type = flags & _MAP_NEW;
-	flags &= ~_MAP_NEW;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap(file,
-			 (unsigned long) addr, (unsigned long) len,
-			 (unsigned long) prot, (unsigned long) flags,
-			 (unsigned long) off);
-	up_write(&current->mm->mmap_sem);
-	if (!ret_type)
-		retval = ((retval < 0xf0000000) ? 0 : retval);
-out_putf:
-	if (file)
-		fput(file);
-out:
-	return (u32) retval;
-}
-
-asmlinkage int sunos_mctl(u32 addr, u32 len, int function, u32 arg)
-{
-	return 0;
-}
-
-asmlinkage int sunos_brk(u32 baddr)
-{
-	int freepages, retval = -ENOMEM;
-	unsigned long rlim;
-	unsigned long newbrk, oldbrk, brk = (unsigned long) baddr;
-
-	down_write(&current->mm->mmap_sem);
-	if (brk < current->mm->end_code)
-		goto out;
-	newbrk = PAGE_ALIGN(brk);
-	oldbrk = PAGE_ALIGN(current->mm->brk);
-	retval = 0;
-	if (oldbrk == newbrk) {
-		current->mm->brk = brk;
-		goto out;
-	}
-	/* Always allow shrinking brk. */
-	if (brk <= current->mm->brk) {
-		current->mm->brk = brk;
-		do_munmap(current->mm, newbrk, oldbrk-newbrk);
-		goto out;
-	}
-	/* Check against rlimit and stack.. */
-	retval = -ENOMEM;
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim >= RLIM_INFINITY)
-		rlim = ~0;
-	if (brk - current->mm->end_code > rlim)
-		goto out;
-	/* Check against existing mmap mappings. */
-	if (find_vma_intersection(current->mm, oldbrk, newbrk+PAGE_SIZE))
-		goto out;
-	/* stupid algorithm to decide if we have enough memory: while
-	 * simple, it hopefully works in most obvious cases.. Easy to
-	 * fool it, but this should catch most mistakes.
-	 */
-	freepages = global_page_state(NR_FILE_PAGES);
-	freepages >>= 1;
-	freepages += nr_free_pages();
-	freepages += nr_swap_pages;
-	freepages -= num_physpages >> 4;
-	freepages -= (newbrk-oldbrk) >> PAGE_SHIFT;
-	if (freepages < 0)
-		goto out;
-	/* Ok, we have probably got enough memory - let it rip. */
-	current->mm->brk = brk;
-	do_brk(oldbrk, newbrk-oldbrk);
-	retval = 0;
-out:
-	up_write(&current->mm->mmap_sem);
-	return retval;
-}
-
-asmlinkage u32 sunos_sbrk(int increment)
-{
-	int error, oldbrk;
-
-	/* This should do it hopefully... */
-	oldbrk = (int)current->mm->brk;
-	error = sunos_brk(((int) current->mm->brk) + increment);
-	if (!error)
-		error = oldbrk;
-	return error;
-}
-
-asmlinkage u32 sunos_sstk(int increment)
-{
-	printk("%s: Call to sunos_sstk(increment<%d>) is unsupported\n",
-	       current->comm, increment);
-
-	return (u32)-1;
-}
-
-/* Give hints to the kernel as to what paging strategy to use...
- * Completely bogus, don't remind me.
- */
-#define VA_NORMAL     0 /* Normal vm usage expected */
-#define VA_ABNORMAL   1 /* Abnormal/random vm usage probable */
-#define VA_SEQUENTIAL 2 /* Accesses will be of a sequential nature */
-#define VA_INVALIDATE 3 /* Page table entries should be flushed ??? */
-static char *vstrings[] = {
-	"VA_NORMAL",
-	"VA_ABNORMAL",
-	"VA_SEQUENTIAL",
-	"VA_INVALIDATE",
-};
-
-asmlinkage void sunos_vadvise(u32 strategy)
-{
-	static int count;
-
-	/* I wanna see who uses this... */
-	if (count++ < 5)
-		printk("%s: Advises us to use %s paging strategy\n",
-		       current->comm,
-		       strategy <= 3 ? vstrings[strategy] : "BOGUS");
-}
-
-/* This just wants the soft limit (ie. rlim_cur element) of the RLIMIT_NOFILE
- * resource limit and is for backwards compatibility with older sunos
- * revs.
- */
-asmlinkage int sunos_getdtablesize(void)
-{
-	return SUNOS_NR_OPEN;
-}
-
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage u32 sunos_sigblock(u32 blk_mask)
-{
-	u32 old;
-
-	spin_lock_irq(&current->sighand->siglock);
-	old = (u32) current->blocked.sig[0];
-	current->blocked.sig[0] |= (blk_mask & _BLOCKABLE);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	return old;
-}
-
-asmlinkage u32 sunos_sigsetmask(u32 newmask)
-{
-	u32 retval;
-
-	spin_lock_irq(&current->sighand->siglock);
-	retval = (u32) current->blocked.sig[0];
-	current->blocked.sig[0] = (newmask & _BLOCKABLE);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	return retval;
-}
-
-/* SunOS getdents is very similar to the newer Linux (iBCS2 compliant)    */
-/* getdents system call, the format of the structure just has a different */
-/* layout (d_off+d_ino instead of d_ino+d_off) */
-struct sunos_dirent {
-    s32		d_off;
-    u32		d_ino;
-    u16		d_reclen;
-    u16		d_namlen;
-    char	d_name[1];
-};
-
-struct sunos_dirent_callback {
-    struct sunos_dirent __user *curr;
-    struct sunos_dirent __user *previous;
-    int count;
-    int error;
-};
-
-#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
-#define ROUND_UP(x) (((x)+sizeof(s32)-1) & ~(sizeof(s32)-1))
-
-static int sunos_filldir(void * __buf, const char * name, int namlen,
-			 loff_t offset, ino_t ino, unsigned int d_type)
-{
-	struct sunos_dirent __user *dirent;
-	struct sunos_dirent_callback * buf = (struct sunos_dirent_callback *) __buf;
-	int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	if (dirent)
-		put_user(offset, &dirent->d_off);
-	dirent = buf->curr;
-	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	if (copy_to_user(dirent->d_name, name, namlen))
-		return -EFAULT;
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *) dirent + reclen;
-	buf->curr = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage int sunos_getdents(unsigned int fd, void __user *dirent, int cnt)
-{
-	struct file * file;
-	struct sunos_dirent __user *lastdirent;
-	struct sunos_dirent_callback buf;
-	int error = -EBADF;
-
-	if (fd >= SUNOS_NR_OPEN)
-		goto out;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct sunos_dirent) + 255))
-		goto out_putf;
-
-	buf.curr = (struct sunos_dirent __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-
-	error = vfs_readdir(file, sunos_filldir, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	lastdirent = buf.previous;
-	error = buf.error;
-	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = cnt - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-/* Old sunos getdirentries, severely broken compatibility stuff here. */
-struct sunos_direntry {
-    u32		d_ino;
-    u16		d_reclen;
-    u16		d_namlen;
-    char	d_name[1];
-};
-
-struct sunos_direntry_callback {
-    struct sunos_direntry __user *curr;
-    struct sunos_direntry __user *previous;
-    int count;
-    int error;
-};
-
-static int sunos_filldirentry(void * __buf, const char * name, int namlen,
-			      loff_t offset, ino_t ino, unsigned int d_type)
-{
-	struct sunos_direntry __user *dirent;
-	struct sunos_direntry_callback * buf =
-		(struct sunos_direntry_callback *) __buf;
-	int reclen = ROUND_UP(NAME_OFFSET(dirent) + namlen + 1);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	dirent = buf->curr;
-	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	if (copy_to_user(dirent->d_name, name, namlen))
-		return -EFAULT;
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *) dirent + reclen;
-	buf->curr = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage int sunos_getdirentries(unsigned int fd,
-				   void __user *dirent,
-				   int cnt,
-				   unsigned int __user *basep)
-{
-	struct file * file;
-	struct sunos_direntry __user *lastdirent;
-	int error = -EBADF;
-	struct sunos_direntry_callback buf;
-
-	if (fd >= SUNOS_NR_OPEN)
-		goto out;
-
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct sunos_direntry) + 255))
-		goto out_putf;
-
-	buf.curr = (struct sunos_direntry __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-
-	error = vfs_readdir(file, sunos_filldirentry, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	lastdirent = buf.previous;
-	error = buf.error;
-	if (lastdirent) {
-		put_user(file->f_pos, basep);
-		error = cnt - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-struct sunos_utsname {
-	char sname[9];
-	char nname[9];
-	char nnext[56];
-	char rel[9];
-	char ver[9];
-	char mach[9];
-};
-
-asmlinkage int sunos_uname(struct sunos_utsname __user *name)
-{
-	int ret;
-
-	down_read(&uts_sem);
-	ret = copy_to_user(&name->sname[0], &utsname()->sysname[0],
-			   sizeof(name->sname) - 1);
-	ret |= copy_to_user(&name->nname[0], &utsname()->nodename[0],
-			    sizeof(name->nname) - 1);
-	ret |= put_user('\0', &name->nname[8]);
-	ret |= copy_to_user(&name->rel[0], &utsname()->release[0],
-			    sizeof(name->rel) - 1);
-	ret |= copy_to_user(&name->ver[0], &utsname()->version[0],
-			    sizeof(name->ver) - 1);
-	ret |= copy_to_user(&name->mach[0], &utsname()->machine[0],
-			    sizeof(name->mach) - 1);
-	up_read(&uts_sem);
-	return (ret ? -EFAULT : 0);
-}
-
-asmlinkage int sunos_nosys(void)
-{
-	struct pt_regs *regs;
-	siginfo_t info;
-	static int cnt;
-
-	regs = current_thread_info()->kregs;
-	if (test_thread_flag(TIF_32BIT)) {
-		regs->tpc &= 0xffffffff;
-		regs->tnpc &= 0xffffffff;
-	}
-	info.si_signo = SIGSYS;
-	info.si_errno = 0;
-	info.si_code = __SI_FAULT|0x100;
-	info.si_addr = (void __user *)regs->tpc;
-	info.si_trapno = regs->u_regs[UREG_G1];
-	send_sig_info(SIGSYS, &info, current);
-	if (cnt++ < 4) {
-		printk("Process makes ni_syscall number %d, register dump:\n",
-		       (int) regs->u_regs[UREG_G1]);
-		show_regs(regs);
-	}
-	return -ENOSYS;
-}
-
-/* This is not a real and complete implementation yet, just to keep
- * the easy SunOS binaries happy.
- */
-asmlinkage int sunos_fpathconf(int fd, int name)
-{
-	int ret;
-
-	switch(name) {
-	case _PCONF_LINK:
-		ret = LINK_MAX;
-		break;
-	case _PCONF_CANON:
-		ret = MAX_CANON;
-		break;
-	case _PCONF_INPUT:
-		ret = MAX_INPUT;
-		break;
-	case _PCONF_NAME:
-		ret = NAME_MAX;
-		break;
-	case _PCONF_PATH:
-		ret = PATH_MAX;
-		break;
-	case _PCONF_PIPE:
-		ret = PIPE_BUF;
-		break;
-	case _PCONF_CHRESTRICT:		/* XXX Investigate XXX */
-		ret = 1;
-		break;
-	case _PCONF_NOTRUNC:		/* XXX Investigate XXX */
-	case _PCONF_VDISABLE:
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-asmlinkage int sunos_pathconf(u32 u_path, int name)
-{
-	int ret;
-
-	ret = sunos_fpathconf(0, name); /* XXX cheese XXX */
-	return ret;
-}
-
-asmlinkage int sunos_select(int width, u32 inp, u32 outp, u32 exp, u32 tvp_x)
-{
-	int ret;
-
-	/* SunOS binaries expect that select won't change the tvp contents */
-	ret = compat_sys_select(width, compat_ptr(inp), compat_ptr(outp),
-				compat_ptr(exp), compat_ptr(tvp_x));
-	if (ret == -EINTR && tvp_x) {
-		struct compat_timeval __user *tvp = compat_ptr(tvp_x);
-		time_t sec, usec;
-
-		__get_user(sec, &tvp->tv_sec);
-		__get_user(usec, &tvp->tv_usec);
-		if (sec == 0 && usec == 0)
-			ret = 0;
-	}
-	return ret;
-}
-
-asmlinkage void sunos_nop(void)
-{
-	return;
-}
-
-#if 0 /* This code doesn't translate user pointers correctly,
-       * disable for now. -DaveM
-       */
-
-/* XXXXXXXXXX SunOS mount/umount. XXXXXXXXXXX */
-#define SMNT_RDONLY       1
-#define SMNT_NOSUID       2
-#define SMNT_NEWTYPE      4
-#define SMNT_GRPID        8
-#define SMNT_REMOUNT      16
-#define SMNT_NOSUB        32
-#define SMNT_MULTI        64
-#define SMNT_SYS5         128
-
-struct sunos_fh_t {
-	char fh_data [NFS_FHSIZE];
-};
-
-struct sunos_nfs_mount_args {
-	struct sockaddr_in  *addr; /* file server address */
-	struct nfs_fh *fh;     /* File handle to be mounted */
-	int        flags;      /* flags */
-	int        wsize;      /* write size in bytes */
-	int        rsize;      /* read size in bytes */
-	int        timeo;      /* initial timeout in .1 secs */
-	int        retrans;    /* times to retry send */
-	char       *hostname;  /* server's hostname */
-	int        acregmin;   /* attr cache file min secs */
-	int        acregmax;   /* attr cache file max secs */
-	int        acdirmin;   /* attr cache dir min secs */
-	int        acdirmax;   /* attr cache dir max secs */
-	char       *netname;   /* server's netname */
-};
-
-
-/* Bind the socket on a local reserved port and connect it to the
- * remote server.  This on Linux/i386 is done by the mount program,
- * not by the kernel. 
- */
-/* XXXXXXXXXXXXXXXXXXXX */
-static int
-sunos_nfs_get_server_fd (int fd, struct sockaddr_in *addr)
-{
-	struct sockaddr_in local;
-	struct sockaddr_in server;
-	int    try_port;
-	int    ret;
-	struct socket *socket;
-	struct inode  *inode;
-	struct file   *file;
-
-	file = fget(fd);
-	if (!file)
-		return 0;
-
-	inode = file->f_path.dentry->d_inode;
-
-	socket = SOCKET_I(inode);
-	local.sin_family = AF_INET;
-	local.sin_addr.s_addr = INADDR_ANY;
-
-	/* IPPORT_RESERVED = 1024, can't find the definition in the kernel */
-	try_port = 1024;
-	do {
-		local.sin_port = htons (--try_port);
-		ret = socket->ops->bind(socket, (struct sockaddr*)&local,
-					sizeof(local));
-	} while (ret && try_port > (1024 / 2));
-
-	if (ret) {
-		fput(file);
-		return 0;
-	}
-
-	server.sin_family = AF_INET;
-	server.sin_addr = addr->sin_addr;
-	server.sin_port = NFS_PORT;
-
-	/* Call sys_connect */
-	ret = socket->ops->connect (socket, (struct sockaddr *) &server,
-				    sizeof (server), file->f_flags);
-	fput(file);
-	if (ret < 0)
-		return 0;
-	return 1;
-}
-
-/* XXXXXXXXXXXXXXXXXXXX */
-static int get_default (int value, int def_value)
-{
-    if (value)
-	return value;
-    else
-	return def_value;
-}
-
-/* XXXXXXXXXXXXXXXXXXXX */
-static int sunos_nfs_mount(char *dir_name, int linux_flags, void __user *data)
-{
-	int  server_fd, err;
-	char *the_name, *mount_page;
-	struct nfs_mount_data linux_nfs_mount;
-	struct sunos_nfs_mount_args sunos_mount;
-
-	/* Ok, here comes the fun part: Linux's nfs mount needs a
-	 * socket connection to the server, but SunOS mount does not
-	 * require this, so we use the information on the destination
-	 * address to create a socket and bind it to a reserved
-	 * port on this system
-	 */
-	if (copy_from_user(&sunos_mount, data, sizeof(sunos_mount)))
-		return -EFAULT;
-
-	server_fd = sys_socket (AF_INET, SOCK_DGRAM, IPPROTO_UDP);
-	if (server_fd < 0)
-		return -ENXIO;
-
-	if (copy_from_user(&linux_nfs_mount.addr, sunos_mount.addr,
-			   sizeof(*sunos_mount.addr)) ||
-	    copy_from_user(&linux_nfs_mount.root, sunos_mount.fh,
-			   sizeof(*sunos_mount.fh))) {
-		sys_close (server_fd);
-		return -EFAULT;
-	}
-
-	if (!sunos_nfs_get_server_fd (server_fd, &linux_nfs_mount.addr)){
-		sys_close (server_fd);
-		return -ENXIO;
-	}
-
-	/* Now, bind it to a locally reserved port */
-	linux_nfs_mount.version  = NFS_MOUNT_VERSION;
-	linux_nfs_mount.flags    = sunos_mount.flags;
-	linux_nfs_mount.fd       = server_fd;
-	
-	linux_nfs_mount.rsize    = get_default (sunos_mount.rsize, 8192);
-	linux_nfs_mount.wsize    = get_default (sunos_mount.wsize, 8192);
-	linux_nfs_mount.timeo    = get_default (sunos_mount.timeo, 10);
-	linux_nfs_mount.retrans  = sunos_mount.retrans;
-	
-	linux_nfs_mount.acregmin = sunos_mount.acregmin;
-	linux_nfs_mount.acregmax = sunos_mount.acregmax;
-	linux_nfs_mount.acdirmin = sunos_mount.acdirmin;
-	linux_nfs_mount.acdirmax = sunos_mount.acdirmax;
-
-	the_name = getname(sunos_mount.hostname);
-	if (IS_ERR(the_name))
-		return PTR_ERR(the_name);
-
-	strlcpy(linux_nfs_mount.hostname, the_name,
-		sizeof(linux_nfs_mount.hostname));
-	putname (the_name);
-	
-	mount_page = (char *) get_zeroed_page(GFP_KERNEL);
-	if (!mount_page)
-		return -ENOMEM;
-
-	memcpy(mount_page, &linux_nfs_mount, sizeof(linux_nfs_mount));
-
-	err = do_mount("", dir_name, "nfs", linux_flags, mount_page);
-
-	free_page((unsigned long) mount_page);
-	return err;
-}
-
-/* XXXXXXXXXXXXXXXXXXXX */
-asmlinkage int
-sunos_mount(char *type, char *dir, int flags, void *data)
-{
-	int linux_flags = 0;
-	int ret = -EINVAL;
-	char *dev_fname = 0;
-	char *dir_page, *type_page;
-
-	if (!capable (CAP_SYS_ADMIN))
-		return -EPERM;
-
-	/* We don't handle the integer fs type */
-	if ((flags & SMNT_NEWTYPE) == 0)
-		goto out;
-
-	/* Do not allow for those flags we don't support */
-	if (flags & (SMNT_GRPID|SMNT_NOSUB|SMNT_MULTI|SMNT_SYS5))
-		goto out;
-
-	if (flags & SMNT_REMOUNT)
-		linux_flags |= MS_REMOUNT;
-	if (flags & SMNT_RDONLY)
-		linux_flags |= MS_RDONLY;
-	if (flags & SMNT_NOSUID)
-		linux_flags |= MS_NOSUID;
-
-	dir_page = getname(dir);
-	ret = PTR_ERR(dir_page);
-	if (IS_ERR(dir_page))
-		goto out;
-
-	type_page = getname(type);
-	ret = PTR_ERR(type_page);
-	if (IS_ERR(type_page))
-		goto out1;
-
-	if (strcmp(type_page, "ext2") == 0) {
-		dev_fname = getname(data);
-	} else if (strcmp(type_page, "iso9660") == 0) {
-		dev_fname = getname(data);
-	} else if (strcmp(type_page, "minix") == 0) {
-		dev_fname = getname(data);
-	} else if (strcmp(type_page, "nfs") == 0) {
-		ret = sunos_nfs_mount (dir_page, flags, data);
-		goto out2;
-        } else if (strcmp(type_page, "ufs") == 0) {
-		printk("Warning: UFS filesystem mounts unsupported.\n");
-		ret = -ENODEV;
-		goto out2;
-	} else if (strcmp(type_page, "proc")) {
-		ret = -ENODEV;
-		goto out2;
-	}
-	ret = PTR_ERR(dev_fname);
-	if (IS_ERR(dev_fname))
-		goto out2;
-	lock_kernel();
-	ret = do_mount(dev_fname, dir_page, type_page, linux_flags, NULL);
-	unlock_kernel();
-	if (dev_fname)
-		putname(dev_fname);
-out2:
-	putname(type_page);
-out1:
-	putname(dir_page);
-out:
-	return ret;
-}
-#endif
-
-asmlinkage int sunos_setpgrp(pid_t pid, pid_t pgid)
-{
-	int ret;
-
-	/* So stupid... */
-	if ((!pid || pid == current->pid) &&
-	    !pgid) {
-		sys_setsid();
-		ret = 0;
-	} else {
-		ret = sys_setpgid(pid, pgid);
-	}
-	return ret;
-}
-
-/* So stupid... */
-extern long compat_sys_wait4(compat_pid_t, compat_uint_t __user *, int,
-			     struct compat_rusage __user *);
-
-asmlinkage int sunos_wait4(compat_pid_t pid, compat_uint_t __user *stat_addr, int options, struct compat_rusage __user *ru)
-{
-	int ret;
-
-	ret = compat_sys_wait4((pid ? pid : ((compat_pid_t)-1)),
-			       stat_addr, options, ru);
-	return ret;
-}
-
-asmlinkage int sunos_killpg(int pgrp, int sig)
-{
-	int ret;
-
-	rcu_read_lock();
-	ret = -EINVAL;
-	if (pgrp > 0)
-		ret = kill_pgrp(find_vpid(pgrp), sig, 0);
-	rcu_read_unlock();
-
-	return ret;
-}
-
-asmlinkage int sunos_audit(void)
-{
-	printk ("sys_audit\n");
-	return -1;
-}
-
-asmlinkage u32 sunos_gethostid(void)
-{
-	u32 ret;
-
-	ret = (((u32)idprom->id_machtype << 24) | ((u32)idprom->id_sernum));
-
-	return ret;
-}
-
-/* sysconf options, for SunOS compatibility */
-#define   _SC_ARG_MAX             1
-#define   _SC_CHILD_MAX           2
-#define   _SC_CLK_TCK             3
-#define   _SC_NGROUPS_MAX         4
-#define   _SC_OPEN_MAX            5
-#define   _SC_JOB_CONTROL         6
-#define   _SC_SAVED_IDS           7
-#define   _SC_VERSION             8
-
-asmlinkage s32 sunos_sysconf (int name)
-{
-	s32 ret;
-
-	switch (name){
-	case _SC_ARG_MAX:
-		ret = ARG_MAX;
-		break;
-	case _SC_CHILD_MAX:
-		ret = current->signal->rlim[RLIMIT_NPROC].rlim_cur;
-		break;
-	case _SC_CLK_TCK:
-		ret = HZ;
-		break;
-	case _SC_NGROUPS_MAX:
-		ret = NGROUPS_MAX;
-		break;
-	case _SC_OPEN_MAX:
-		ret = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		break;
-	case _SC_JOB_CONTROL:
-		ret = 1;	/* yes, we do support job control */
-		break;
-	case _SC_SAVED_IDS:
-		ret = 1;	/* yes, we do support saved uids  */
-		break;
-	case _SC_VERSION:
-		/* mhm, POSIX_VERSION is in /usr/include/unistd.h
-		 * should it go on /usr/include/linux?
-		 */
-		ret = 199009;
-		break;
-	default:
-		ret = -1;
-		break;
-	};
-	return ret;
-}
-
-asmlinkage int sunos_semsys(int op, u32 arg1, u32 arg2, u32 arg3, void __user *ptr)
-{
-	union semun arg4;
-	int ret;
-
-	switch (op) {
-	case 0:
-		/* Most arguments match on a 1:1 basis but cmd doesn't */
-		switch(arg3) {
-		case 4:
-			arg3=GETPID; break;
-		case 5:
-			arg3=GETVAL; break;
-		case 6:
-			arg3=GETALL; break;
-		case 3:
-			arg3=GETNCNT; break;
-		case 7:
-			arg3=GETZCNT; break;
-		case 8:
-			arg3=SETVAL; break;
-		case 9:
-			arg3=SETALL; break;
-		}
-		/* sys_semctl(): */
-		/* value to modify semaphore to */
-		arg4.__pad = ptr;
-		ret = sys_semctl((int)arg1, (int)arg2, (int)arg3, arg4);
-		break;
-	case 1:
-		/* sys_semget(): */
-		ret = sys_semget((key_t)arg1, (int)arg2, (int)arg3);
-		break;
-	case 2:
-		/* sys_semop(): */
-		ret = sys_semop((int)arg1, (struct sembuf __user *)(unsigned long)arg2,
-				(unsigned int) arg3);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	};
-	return ret;
-}
-
-struct msgbuf32 {
-	s32 mtype;
-	char mtext[1];
-};
-
-struct ipc_perm32
-{
-	key_t    	  key;
-        compat_uid_t  uid;
-        compat_gid_t  gid;
-        compat_uid_t  cuid;
-        compat_gid_t  cgid;
-        compat_mode_t mode;
-        unsigned short  seq;
-};
-
-struct msqid_ds32
-{
-        struct ipc_perm32 msg_perm;
-        u32 msg_first;
-        u32 msg_last;
-        compat_time_t msg_stime;
-        compat_time_t msg_rtime;
-        compat_time_t msg_ctime;
-        u32 wwait;
-        u32 rwait;
-        unsigned short msg_cbytes;
-        unsigned short msg_qnum;  
-        unsigned short msg_qbytes;
-        compat_ipc_pid_t msg_lspid;
-        compat_ipc_pid_t msg_lrpid;
-};
-
-static inline int sunos_msqid_get(struct msqid_ds32 __user *user,
-				  struct msqid_ds *kern)
-{
-	if (get_user(kern->msg_perm.key, &user->msg_perm.key)		||
-	    __get_user(kern->msg_perm.uid, &user->msg_perm.uid)		||
-	    __get_user(kern->msg_perm.gid, &user->msg_perm.gid)		||
-	    __get_user(kern->msg_perm.cuid, &user->msg_perm.cuid)	||
-	    __get_user(kern->msg_perm.cgid, &user->msg_perm.cgid)	||
-	    __get_user(kern->msg_stime, &user->msg_stime)		||
-	    __get_user(kern->msg_rtime, &user->msg_rtime)		||
-	    __get_user(kern->msg_ctime, &user->msg_ctime)		||
-	    __get_user(kern->msg_ctime, &user->msg_cbytes)		||
-	    __get_user(kern->msg_ctime, &user->msg_qnum)		||
-	    __get_user(kern->msg_ctime, &user->msg_qbytes)		||
-	    __get_user(kern->msg_ctime, &user->msg_lspid)		||
-	    __get_user(kern->msg_ctime, &user->msg_lrpid))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int sunos_msqid_put(struct msqid_ds32 __user *user,
-				  struct msqid_ds *kern)
-{
-	if (put_user(kern->msg_perm.key, &user->msg_perm.key)		||
-	    __put_user(kern->msg_perm.uid, &user->msg_perm.uid)		||
-	    __put_user(kern->msg_perm.gid, &user->msg_perm.gid)		||
-	    __put_user(kern->msg_perm.cuid, &user->msg_perm.cuid)	||
-	    __put_user(kern->msg_perm.cgid, &user->msg_perm.cgid)	||
-	    __put_user(kern->msg_stime, &user->msg_stime)		||
-	    __put_user(kern->msg_rtime, &user->msg_rtime)		||
-	    __put_user(kern->msg_ctime, &user->msg_ctime)		||
-	    __put_user(kern->msg_ctime, &user->msg_cbytes)		||
-	    __put_user(kern->msg_ctime, &user->msg_qnum)		||
-	    __put_user(kern->msg_ctime, &user->msg_qbytes)		||
-	    __put_user(kern->msg_ctime, &user->msg_lspid)		||
-	    __put_user(kern->msg_ctime, &user->msg_lrpid))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int sunos_msgbuf_get(struct msgbuf32 __user *user, struct msgbuf *kern, int len)
-{
-	if (get_user(kern->mtype, &user->mtype)	||
-	    __copy_from_user(kern->mtext, &user->mtext, len))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int sunos_msgbuf_put(struct msgbuf32 __user *user, struct msgbuf *kern, int len)
-{
-	if (put_user(kern->mtype, &user->mtype)	||
-	    __copy_to_user(user->mtext, kern->mtext, len))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage int sunos_msgsys(int op, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
-{
-	struct sparc_stackf32 __user *sp;
-	struct msqid_ds kds;
-	struct msgbuf *kmbuf;
-	mm_segment_t old_fs = get_fs();
-	u32 arg5;
-	int rval;
-
-	switch(op) {
-	case 0:
-		rval = sys_msgget((key_t)arg1, (int)arg2);
-		break;
-	case 1:
-		if (!sunos_msqid_get((struct msqid_ds32 __user *)(unsigned long)arg3, &kds)) {
-			set_fs(KERNEL_DS);
-			rval = sys_msgctl((int)arg1, (int)arg2,
-					  (struct msqid_ds __user *)(unsigned long)arg3);
-			set_fs(old_fs);
-			if (!rval)
-				rval = sunos_msqid_put((struct msqid_ds32 __user *)(unsigned long)arg3,
-						       &kds);
-		} else
-			rval = -EFAULT;
-		break;
-	case 2:
-		rval = -EFAULT;
-		kmbuf = kmalloc(sizeof(struct msgbuf) + arg3,
-						 GFP_KERNEL);
-		if (!kmbuf)
-			break;
-		sp = (struct sparc_stackf32 __user *)
-			(current_thread_info()->kregs->u_regs[UREG_FP] & 0xffffffffUL);
-		if (get_user(arg5, &sp->xxargs[0])) {
-			rval = -EFAULT;
-			kfree(kmbuf);
-			break;
-		}
-		set_fs(KERNEL_DS);
-		rval = sys_msgrcv((int)arg1, (struct msgbuf __user *) kmbuf,
-				  (size_t)arg3,
-				  (long)arg4, (int)arg5);
-		set_fs(old_fs);
-		if (!rval)
-			rval = sunos_msgbuf_put((struct msgbuf32 __user *)(unsigned long)arg2,
-						kmbuf, arg3);
-		kfree(kmbuf);
-		break;
-	case 3:
-		rval = -EFAULT;
-		kmbuf = kmalloc(sizeof(struct msgbuf) + arg3,
-						 GFP_KERNEL);
-		if (!kmbuf || sunos_msgbuf_get((struct msgbuf32 __user *)(unsigned long)arg2,
-					       kmbuf, arg3))
-			break;
-		set_fs(KERNEL_DS);
-		rval = sys_msgsnd((int)arg1, (struct msgbuf __user *) kmbuf,
-				  (size_t)arg3, (int)arg4);
-		set_fs(old_fs);
-		kfree(kmbuf);
-		break;
-	default:
-		rval = -EINVAL;
-		break;
-	}
-	return rval;
-}
-
-struct shmid_ds32 {
-        struct ipc_perm32       shm_perm;
-        int                     shm_segsz;
-        compat_time_t         shm_atime;
-        compat_time_t         shm_dtime;
-        compat_time_t         shm_ctime;
-        compat_ipc_pid_t    shm_cpid; 
-        compat_ipc_pid_t    shm_lpid; 
-        unsigned short          shm_nattch;
-};
-                                                        
-static inline int sunos_shmid_get(struct shmid_ds32 __user *user,
-				  struct shmid_ds *kern)
-{
-	if (get_user(kern->shm_perm.key, &user->shm_perm.key)		||
-	    __get_user(kern->shm_perm.uid, &user->shm_perm.uid)		||
-	    __get_user(kern->shm_perm.gid, &user->shm_perm.gid)		||
-	    __get_user(kern->shm_perm.cuid, &user->shm_perm.cuid)	||
-	    __get_user(kern->shm_perm.cgid, &user->shm_perm.cgid)	||
-	    __get_user(kern->shm_segsz, &user->shm_segsz)		||
-	    __get_user(kern->shm_atime, &user->shm_atime)		||
-	    __get_user(kern->shm_dtime, &user->shm_dtime)		||
-	    __get_user(kern->shm_ctime, &user->shm_ctime)		||
-	    __get_user(kern->shm_cpid, &user->shm_cpid)			||
-	    __get_user(kern->shm_lpid, &user->shm_lpid)			||
-	    __get_user(kern->shm_nattch, &user->shm_nattch))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int sunos_shmid_put(struct shmid_ds32 __user *user,
-				  struct shmid_ds *kern)
-{
-	if (put_user(kern->shm_perm.key, &user->shm_perm.key)		||
-	    __put_user(kern->shm_perm.uid, &user->shm_perm.uid)		||
-	    __put_user(kern->shm_perm.gid, &user->shm_perm.gid)		||
-	    __put_user(kern->shm_perm.cuid, &user->shm_perm.cuid)	||
-	    __put_user(kern->shm_perm.cgid, &user->shm_perm.cgid)	||
-	    __put_user(kern->shm_segsz, &user->shm_segsz)		||
-	    __put_user(kern->shm_atime, &user->shm_atime)		||
-	    __put_user(kern->shm_dtime, &user->shm_dtime)		||
-	    __put_user(kern->shm_ctime, &user->shm_ctime)		||
-	    __put_user(kern->shm_cpid, &user->shm_cpid)			||
-	    __put_user(kern->shm_lpid, &user->shm_lpid)			||
-	    __put_user(kern->shm_nattch, &user->shm_nattch))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage int sunos_shmsys(int op, u32 arg1, u32 arg2, u32 arg3)
-{
-	struct shmid_ds ksds;
-	unsigned long raddr;
-	mm_segment_t old_fs = get_fs();
-	int rval;
-
-	switch(op) {
-	case 0:
-		/* do_shmat(): attach a shared memory area */
-		rval = do_shmat((int)arg1,(char __user *)(unsigned long)arg2,(int)arg3,&raddr);
-		if (!rval)
-			rval = (int) raddr;
-		break;
-	case 1:
-		/* sys_shmctl(): modify shared memory area attr. */
-		if (!sunos_shmid_get((struct shmid_ds32 __user *)(unsigned long)arg3, &ksds)) {
-			set_fs(KERNEL_DS);
-			rval = sys_shmctl((int) arg1,(int) arg2,
-					  (struct shmid_ds __user *) &ksds);
-			set_fs(old_fs);
-			if (!rval)
-				rval = sunos_shmid_put((struct shmid_ds32 __user *)(unsigned long)arg3,
-						       &ksds);
-		} else
-			rval = -EFAULT;
-		break;
-	case 2:
-		/* sys_shmdt(): detach a shared memory area */
-		rval = sys_shmdt((char __user *)(unsigned long)arg1);
-		break;
-	case 3:
-		/* sys_shmget(): get a shared memory area */
-		rval = sys_shmget((key_t)arg1,(int)arg2,(int)arg3);
-		break;
-	default:
-		rval = -EINVAL;
-		break;
-	};
-	return rval;
-}
-
-extern asmlinkage long sparc32_open(const char __user * filename, int flags, int mode);
-
-asmlinkage int sunos_open(u32 fname, int flags, int mode)
-{
-	const char __user *filename = compat_ptr(fname);
-
-	return sparc32_open(filename, flags, mode);
-}
-
-#define SUNOS_EWOULDBLOCK 35
-
-/* see the sunos man page read(2v) for an explanation
-   of this garbage. We use O_NDELAY to mark
-   file descriptors that have been set non-blocking 
-   using 4.2BSD style calls. (tridge) */
-
-static inline int check_nonblock(int ret, int fd)
-{
-	if (ret == -EAGAIN) {
-		struct file * file = fget(fd);
-		if (file) {
-			if (file->f_flags & O_NDELAY)
-				ret = -SUNOS_EWOULDBLOCK;
-			fput(file);
-		}
-	}
-	return ret;
-}
-
-asmlinkage int sunos_read(unsigned int fd, char __user *buf, u32 count)
-{
-	int ret;
-
-	ret = check_nonblock(sys_read(fd, buf, count), fd);
-	return ret;
-}
-
-asmlinkage int sunos_readv(u32 fd, void __user *vector, s32 count)
-{
-	int ret;
-
-	ret = check_nonblock(compat_sys_readv(fd, vector, count), fd);
-	return ret;
-}
-
-asmlinkage int sunos_write(unsigned int fd, char __user *buf, u32 count)
-{
-	int ret;
-
-	ret = check_nonblock(sys_write(fd, buf, count), fd);
-	return ret;
-}
-
-asmlinkage int sunos_writev(u32 fd, void __user *vector, s32 count)
-{
-	int ret;
-
-	ret = check_nonblock(compat_sys_writev(fd, vector, count), fd);
-	return ret;
-}
-
-asmlinkage int sunos_recv(u32 __fd, void __user *ubuf, int size, unsigned flags)
-{
-	int ret, fd = (int) __fd;
-
-	ret = check_nonblock(sys_recv(fd, ubuf, size, flags), fd);
-	return ret;
-}
-
-asmlinkage int sunos_send(u32 __fd, void __user *buff, int len, unsigned flags)
-{
-	int ret, fd = (int) __fd;
-
-	ret = check_nonblock(sys_send(fd, buff, len, flags), fd);
-	return ret;
-}
-
-asmlinkage int sunos_accept(u32 __fd, struct sockaddr __user *sa, int __user *addrlen)
-{
-	int ret, fd = (int) __fd;
-
-	while (1) {
-		ret = check_nonblock(sys_accept(fd, sa, addrlen), fd);
-		if (ret != -ENETUNREACH && ret != -EHOSTUNREACH)
-			break;
-	}
-	return ret;
-}
-
-#define SUNOS_SV_INTERRUPT 2
-
-asmlinkage int sunos_sigaction (int sig,
-				struct old_sigaction32 __user *act,
-				struct old_sigaction32 __user *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		compat_old_sigset_t mask;
-		u32 u_handler;
-
-		if (get_user(u_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_flags, &act->sa_flags))
-			return -EFAULT;
-		new_ka.sa.sa_handler = compat_ptr(u_handler);
-		__get_user(mask, &act->sa_mask);
-		new_ka.sa.sa_restorer = NULL;
-		new_ka.ka_restorer = NULL;
-		siginitset(&new_ka.sa.sa_mask, mask);
-		new_ka.sa.sa_flags ^= SUNOS_SV_INTERRUPT;
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		old_ka.sa.sa_flags ^= SUNOS_SV_INTERRUPT;
-		if (put_user(ptr_to_compat(old_ka.sa.sa_handler), &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_flags, &oact->sa_flags))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int sunos_setsockopt(u32 __fd, u32 __level, u32 __optname,
-				char __user *optval, u32 __optlen)
-{
-	int fd = (int) __fd;
-	int level = (int) __level;
-	int optname = (int) __optname;
-	int optlen = (int) __optlen;
-	int tr_opt = optname;
-	int ret;
-
-	if (level == SOL_IP) {
-		/* Multicast socketopts (ttl, membership) */
-		if (tr_opt >=2 && tr_opt <= 6)
-			tr_opt += 30;
-	}
-	ret = sys_setsockopt(fd, level, tr_opt,
-			     optval, optlen);
-	return ret;
-}
-
-asmlinkage int sunos_getsockopt(u32 __fd, u32 __level, u32 __optname,
-				char __user *optval, int __user *optlen)
-{
-	int fd = (int) __fd;
-	int level = (int) __level;
-	int optname = (int) __optname;
-	int tr_opt = optname;
-	int ret;
-
-	if (level == SOL_IP) {
-		/* Multicast socketopts (ttl, membership) */
-		if (tr_opt >=2 && tr_opt <= 6)
-			tr_opt += 30;
-	}
-	ret = compat_sys_getsockopt(fd, level, tr_opt,
-				    optval, optlen);
-	return ret;
-}
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 6b9b718e24af..a4fef2ba1ae1 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -155,125 +155,3 @@ sys_call_table:
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime
-
-#if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \
-    defined(CONFIG_SOLARIS_EMUL_MODULE)
-	/* Now the 32-bit SunOS syscall table. */
-
-	.align 4
-	.globl sunos_sys_table
-sunos_sys_table:
-/*0*/	.word sunos_indir, sys32_exit, sys_fork
-	.word sunos_read, sunos_write, sunos_open
-	.word sys_close, sunos_wait4, sys_creat
-	.word sys_link, sys_unlink, sunos_execv
-	.word sys_chdir, sunos_nosys, sys32_mknod
-	.word sys_chmod, sys32_lchown16, sunos_brk
-	.word sunos_nosys, sys32_lseek, sunos_getpid
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_getuid, sunos_nosys, sys_ptrace
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sys_access, sunos_nosys, sunos_nosys
-	.word sys_sync, sys_kill, compat_sys_newstat
-	.word sunos_nosys, compat_sys_newlstat, sys_dup
-	.word sys_pipe, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_getgid
-	.word sunos_nosys, sunos_nosys
-/*50*/	.word sunos_nosys, sys_acct, sunos_nosys
-	.word sunos_mctl, sunos_ioctl, sys_reboot
-	.word sunos_nosys, sys_symlink, sys_readlink
-	.word sys32_execve, sys_umask, sys_chroot
-	.word compat_sys_newfstat, sunos_nosys, sys_getpagesize
-	.word sys_msync, sys_vfork, sunos_nosys
-	.word sunos_nosys, sunos_sbrk, sunos_sstk
-	.word sunos_mmap, sunos_vadvise, sys_munmap
-	.word sys_mprotect, sys_madvise, sys_vhangup
-	.word sunos_nosys, sys_mincore, sys32_getgroups16
-	.word sys32_setgroups16, sys_getpgrp, sunos_setpgrp
-	.word compat_sys_setitimer, sunos_nosys, sys_swapon
-	.word compat_sys_getitimer, sys_gethostname, sys_sethostname
-	.word sunos_getdtablesize, sys_dup2, sunos_nop
-	.word compat_sys_fcntl, sunos_select, sunos_nop
-	.word sys_fsync, sys32_setpriority, sys32_socket
-	.word sys32_connect, sunos_accept
-/*100*/	.word sys_getpriority, sunos_send, sunos_recv
-	.word sunos_nosys, sys32_bind, sunos_setsockopt
-	.word sys32_listen, sunos_nosys, sunos_sigaction
-	.word sunos_sigblock, sunos_sigsetmask, sys_sigpause
-	.word sys32_sigstack, sys32_recvmsg, sys32_sendmsg
-	.word sunos_nosys, sys32_gettimeofday, compat_sys_getrusage
-	.word sunos_getsockopt, sunos_nosys, sunos_readv
-	.word sunos_writev, sys32_settimeofday, sys32_fchown16
-	.word sys_fchmod, sys32_recvfrom, sys32_setreuid16
-	.word sys32_setregid16, sys_rename, sys_truncate
-	.word sys_ftruncate, sys_flock, sunos_nosys
-	.word sys32_sendto, sys32_shutdown, sys32_socketpair
-	.word sys_mkdir, sys_rmdir, sys32_utimes
-	.word sys32_sigreturn, sunos_nosys, sys32_getpeername
-	.word sunos_gethostid, sunos_nosys, compat_sys_getrlimit
-	.word compat_sys_setrlimit, sunos_killpg, sunos_nosys
-	.word sunos_nosys, sunos_nosys
-/*150*/	.word sys32_getsockname, sunos_nosys, sunos_nosys
-	.word sys_poll, sunos_nosys, sunos_nosys
-	.word sunos_getdirentries, compat_sys_statfs, compat_sys_fstatfs
-	.word sys_oldumount, sunos_nosys, sunos_nosys
-	.word sys_getdomainname, sys_setdomainname
-	.word sunos_nosys, sys_quotactl, sunos_nosys
-	.word sunos_nosys, sys_ustat, sunos_semsys
-	.word sunos_nosys, sunos_shmsys, sunos_audit
-	.word sunos_nosys, sunos_getdents, sys_setsid
-	.word sys_fchdir, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, compat_sys_sigpending, sunos_nosys
-	.word sys_setpgid, sunos_pathconf, sunos_fpathconf
-	.word sunos_sysconf, sunos_uname, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-/*200*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys
-/*250*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-/*260*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-/*270*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-/*280*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-/*290*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-/*300*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-/*310*/	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys, sunos_nosys, sunos_nosys
-	.word sunos_nosys
-
-#endif
diff --git a/arch/sparc64/kernel/systbls.h b/arch/sparc64/kernel/systbls.h
new file mode 100644
index 000000000000..bc9f5dac4069
--- /dev/null
+++ b/arch/sparc64/kernel/systbls.h
@@ -0,0 +1,51 @@
+#ifndef _SYSTBLS_H
+#define _SYSTBLS_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/utsname.h>
+#include <asm/utrap.h>
+#include <asm/signal.h>
+
+extern asmlinkage unsigned long sys_getpagesize(void);
+extern asmlinkage unsigned long sparc_brk(unsigned long brk);
+extern asmlinkage long sparc_pipe(struct pt_regs *regs);
+extern asmlinkage long sys_ipc(unsigned int call, int first,
+			       unsigned long second,
+			       unsigned long third,
+			       void __user *ptr, long fifth);
+extern asmlinkage long sparc64_newuname(struct new_utsname __user *name);
+extern asmlinkage long sparc64_personality(unsigned long personality);
+extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
+					 unsigned long prot, unsigned long flags,
+					 unsigned long fd, unsigned long off);
+extern asmlinkage long sys64_munmap(unsigned long addr, size_t len);
+extern asmlinkage unsigned long sys64_mremap(unsigned long addr,
+					     unsigned long old_len,
+					     unsigned long new_len,
+					     unsigned long flags,
+					     unsigned long new_addr);
+extern asmlinkage unsigned long c_sys_nis_syscall(struct pt_regs *regs);
+extern asmlinkage long sys_getdomainname(char __user *name, int len);
+extern asmlinkage long sys_utrap_install(utrap_entry_t type,
+					 utrap_handler_t new_p,
+					 utrap_handler_t new_d,
+					 utrap_handler_t __user *old_p,
+					 utrap_handler_t __user *old_d);
+extern asmlinkage long sparc_memory_ordering(unsigned long model,
+					     struct pt_regs *regs);
+extern asmlinkage long sys_rt_sigaction(int sig,
+					const struct sigaction __user *act,
+					struct sigaction __user *oact,
+					void __user *restorer,
+					size_t sigsetsize);
+extern asmlinkage long sys_perfctr(int opcode, unsigned long arg0,
+				   unsigned long arg1, unsigned long arg2);
+
+extern asmlinkage void sparc64_set_context(struct pt_regs *regs);
+extern asmlinkage void sparc64_get_context(struct pt_regs *regs);
+extern asmlinkage long sys_sigpause(unsigned int set);
+extern asmlinkage long sys_sigsuspend(old_sigset_t set);
+extern void do_rt_sigreturn(struct pt_regs *regs);
+
+#endif /* _SYSTBLS_H */
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index d204f1ab1d4c..e5d238970c7e 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -1,7 +1,6 @@
-/* $Id: time.c,v 1.42 2002/01/23 14:33:55 davem Exp $
- * time.c: UltraSparc timer and TOD clock support.
+/* time.c: UltraSparc timer and TOD clock support.
  *
- * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1998 Eddie C. Dost   (ecd@skynet.be)
  *
  * Based largely on code which is:
@@ -48,6 +47,8 @@
 #include <asm/uaccess.h>
 #include <asm/irq_regs.h>
 
+#include "entry.h"
+
 DEFINE_SPINLOCK(mostek_lock);
 DEFINE_SPINLOCK(rtc_lock);
 void __iomem *mstk48t02_regs = NULL;
@@ -508,6 +509,37 @@ static int __init has_low_battery(void)
 	return (data1 == data2);	/* Was the write blocked? */
 }
 
+static void __init mostek_set_system_time(void __iomem *mregs)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	u8 tmp;
+
+	spin_lock_irq(&mostek_lock);
+
+	/* Traditional Mostek chip. */
+	tmp = mostek_read(mregs + MOSTEK_CREG);
+	tmp |= MSTK_CREG_READ;
+	mostek_write(mregs + MOSTEK_CREG, tmp);
+
+	sec = MSTK_REG_SEC(mregs);
+	min = MSTK_REG_MIN(mregs);
+	hour = MSTK_REG_HOUR(mregs);
+	day = MSTK_REG_DOM(mregs);
+	mon = MSTK_REG_MONTH(mregs);
+	year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
+
+	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
+	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
+	set_normalized_timespec(&wall_to_monotonic,
+ 	                        -xtime.tv_sec, -xtime.tv_nsec);
+
+	tmp = mostek_read(mregs + MOSTEK_CREG);
+	tmp &= ~MSTK_CREG_READ;
+	mostek_write(mregs + MOSTEK_CREG, tmp);
+
+	spin_unlock_irq(&mostek_lock);
+}
+
 /* Probe for the real time clock chip. */
 static void __init set_system_time(void)
 {
@@ -520,7 +552,6 @@ static void __init set_system_time(void)
 	unsigned long dregs = 0UL;
 	void __iomem *bregs = 0UL;
 #endif
-	u8 tmp;
 
 	if (!mregs && !dregs && !bregs) {
 		prom_printf("Something wrong, clock regs not mapped yet.\n");
@@ -528,20 +559,11 @@ static void __init set_system_time(void)
 	}		
 
 	if (mregs) {
-		spin_lock_irq(&mostek_lock);
-
-		/* Traditional Mostek chip. */
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp |= MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
+		mostek_set_system_time(mregs);
+		return;
+	}
 
-		sec = MSTK_REG_SEC(mregs);
-		min = MSTK_REG_MIN(mregs);
-		hour = MSTK_REG_HOUR(mregs);
-		day = MSTK_REG_DOM(mregs);
-		mon = MSTK_REG_MONTH(mregs);
-		year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
-	} else if (bregs) {
+	if (bregs) {
 		unsigned char val = readb(bregs + 0x0e);
 		unsigned int century;
 
@@ -596,14 +618,6 @@ static void __init set_system_time(void)
 	xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
 	set_normalized_timespec(&wall_to_monotonic,
  	                        -xtime.tv_sec, -xtime.tv_nsec);
-
-	if (mregs) {
-		tmp = mostek_read(mregs + MOSTEK_CREG);
-		tmp &= ~MSTK_CREG_READ;
-		mostek_write(mregs + MOSTEK_CREG, tmp);
-
-		spin_unlock_irq(&mostek_lock);
-	}
 }
 
 /* davem suggests we keep this within the 4M locked kernel image */
@@ -1027,7 +1041,7 @@ void __init time_init(void)
 	setup_clockevent_multiplier(clock);
 
 	sparc64_clockevent.max_delta_ns =
-		clockevent_delta2ns(0x7fffffffffffffff, &sparc64_clockevent);
+		clockevent_delta2ns(0x7fffffffffffffffUL, &sparc64_clockevent);
 	sparc64_clockevent.min_delta_ns =
 		clockevent_delta2ns(0xF, &sparc64_clockevent);
 
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 4ae2e525d68b..56ff55211341 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -105,7 +105,7 @@ startup_continue:
 	wr		%g2, 0, %tick_cmpr
 
 	/* Call OBP by hand to lock KERNBASE into i/d tlbs.
-	 * We lock 2 consequetive entries if we are 'bigkernel'.
+	 * We lock 'num_kernel_image_mappings' consequetive entries.
 	 */
 	sethi		%hi(prom_entry_lock), %g2
 1:	ldstub		[%g2 + %lo(prom_entry_lock)], %g1
@@ -119,6 +119,29 @@ startup_continue:
 	add		%l2, -(192 + 128), %sp
 	flushw
 
+	/* Setup the loop variables:
+	 * %l3: VADDR base
+	 * %l4: TTE base
+	 * %l5: Loop iterator, iterates from 0 to 'num_kernel_image_mappings'
+	 * %l6: Number of TTE entries to map
+	 * %l7: Highest TTE entry number, we count down
+	 */
+	sethi		%hi(KERNBASE), %l3
+	sethi		%hi(kern_locked_tte_data), %l4
+	ldx		[%l4 + %lo(kern_locked_tte_data)], %l4
+	clr		%l5
+	sethi		%hi(num_kernel_image_mappings), %l6
+	lduw		[%l6 + %lo(num_kernel_image_mappings)], %l6
+	add		%l6, 1, %l6
+
+	mov		15, %l7
+	BRANCH_IF_ANY_CHEETAH(g1,g5,2f)
+
+	mov		63, %l7
+2:
+
+3:
+	/* Lock into I-MMU */
 	sethi		%hi(call_method), %g2
 	or		%g2, %lo(call_method), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x00]
@@ -132,63 +155,26 @@ startup_continue:
 	sethi		%hi(prom_mmu_ihandle_cache), %g2
 	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x20]
-	sethi		%hi(KERNBASE), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x28]
-	sethi		%hi(kern_locked_tte_data), %g2
-	ldx		[%g2 + %lo(kern_locked_tte_data)], %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x30]
-
-	mov		15, %g2
-	BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
 
-	mov		63, %g2
-1:
-	stx		%g2, [%sp + 2047 + 128 + 0x38]
-	sethi		%hi(p1275buf), %g2
-	or		%g2, %lo(p1275buf), %g2
-	ldx		[%g2 + 0x08], %o1
-	call		%o1
-	 add		%sp, (2047 + 128), %o0
+	/* Each TTE maps 4MB, convert index to offset.  */
+	sllx		%l5, 22, %g1
 
-	sethi		%hi(bigkernel), %g2
-	lduw		[%g2 + %lo(bigkernel)], %g2
-	brz,pt		%g2, do_dtlb
-	 nop
+	add		%l3, %g1, %g2
+	stx		%g2, [%sp + 2047 + 128 + 0x28]	! VADDR
+	add		%l4, %g1, %g2
+	stx		%g2, [%sp + 2047 + 128 + 0x30]	! TTE
 
-	sethi		%hi(call_method), %g2
-	or		%g2, %lo(call_method), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x00]
-	mov		5, %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x08]
-	mov		1, %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x10]
-	sethi		%hi(itlb_load), %g2
-	or		%g2, %lo(itlb_load), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x18]
-	sethi		%hi(prom_mmu_ihandle_cache), %g2
-	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x20]
-	sethi		%hi(KERNBASE + 0x400000), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x28]
-	sethi		%hi(kern_locked_tte_data), %g2
-	ldx		[%g2 + %lo(kern_locked_tte_data)], %g2
-	sethi		%hi(0x400000), %g1
-	add		%g2, %g1, %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x30]
-
-	mov		14, %g2
-	BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
-
-	mov		62, %g2
-1:
+	/* TTE index is highest minus loop index.  */
+	sub		%l7, %l5, %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x38]
+
 	sethi		%hi(p1275buf), %g2
 	or		%g2, %lo(p1275buf), %g2
 	ldx		[%g2 + 0x08], %o1
 	call		%o1
 	 add		%sp, (2047 + 128), %o0
 
-do_dtlb:
+	/* Lock into D-MMU */
 	sethi		%hi(call_method), %g2
 	or		%g2, %lo(call_method), %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x00]
@@ -202,65 +188,30 @@ do_dtlb:
 	sethi		%hi(prom_mmu_ihandle_cache), %g2
 	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x20]
-	sethi		%hi(KERNBASE), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x28]
-	sethi		%hi(kern_locked_tte_data), %g2
-	ldx		[%g2 + %lo(kern_locked_tte_data)], %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x30]
 
-	mov		15, %g2
-	BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
+	/* Each TTE maps 4MB, convert index to offset.  */
+	sllx		%l5, 22, %g1
 
-	mov		63, %g2
-1:
+	add		%l3, %g1, %g2
+	stx		%g2, [%sp + 2047 + 128 + 0x28]	! VADDR
+	add		%l4, %g1, %g2
+	stx		%g2, [%sp + 2047 + 128 + 0x30]	! TTE
 
+	/* TTE index is highest minus loop index.  */
+	sub		%l7, %l5, %g2
 	stx		%g2, [%sp + 2047 + 128 + 0x38]
+
 	sethi		%hi(p1275buf), %g2
 	or		%g2, %lo(p1275buf), %g2
 	ldx		[%g2 + 0x08], %o1
 	call		%o1
 	 add		%sp, (2047 + 128), %o0
 
-	sethi		%hi(bigkernel), %g2
-	lduw		[%g2 + %lo(bigkernel)], %g2
-	brz,pt		%g2, do_unlock
+	add		%l5, 1, %l5
+	cmp		%l5, %l6
+	bne,pt		%xcc, 3b
 	 nop
 
-	sethi		%hi(call_method), %g2
-	or		%g2, %lo(call_method), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x00]
-	mov		5, %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x08]
-	mov		1, %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x10]
-	sethi		%hi(dtlb_load), %g2
-	or		%g2, %lo(dtlb_load), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x18]
-	sethi		%hi(prom_mmu_ihandle_cache), %g2
-	lduw		[%g2 + %lo(prom_mmu_ihandle_cache)], %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x20]
-	sethi		%hi(KERNBASE + 0x400000), %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x28]
-	sethi		%hi(kern_locked_tte_data), %g2
-	ldx		[%g2 + %lo(kern_locked_tte_data)], %g2
-	sethi		%hi(0x400000), %g1
-	add		%g2, %g1, %g2
-	stx		%g2, [%sp + 2047 + 128 + 0x30]
-
-	mov		14, %g2
-	BRANCH_IF_ANY_CHEETAH(g1,g5,1f)
-
-	mov		62, %g2
-1:
-
-	stx		%g2, [%sp + 2047 + 128 + 0x38]
-	sethi		%hi(p1275buf), %g2
-	or		%g2, %lo(p1275buf), %g2
-	ldx		[%g2 + 0x08], %o1
-	call		%o1
-	 add		%sp, (2047 + 128), %o0
-
-do_unlock:
 	sethi		%hi(prom_entry_lock), %g2
 	stb		%g0, [%g2 + %lo(prom_entry_lock)]
 	membar		#StoreStore | #StoreLoad
@@ -269,47 +220,36 @@ do_unlock:
 	 nop
 
 niagara_lock_tlb:
+	sethi		%hi(KERNBASE), %l3
+	sethi		%hi(kern_locked_tte_data), %l4
+	ldx		[%l4 + %lo(kern_locked_tte_data)], %l4
+	clr		%l5
+	sethi		%hi(num_kernel_image_mappings), %l6
+	lduw		[%l6 + %lo(num_kernel_image_mappings)], %l6
+	add		%l6, 1, %l6
+
+1:
 	mov		HV_FAST_MMU_MAP_PERM_ADDR, %o5
-	sethi		%hi(KERNBASE), %o0
+	sllx		%l5, 22, %g2
+	add		%l3, %g2, %o0
 	clr		%o1
-	sethi		%hi(kern_locked_tte_data), %o2
-	ldx		[%o2 + %lo(kern_locked_tte_data)], %o2
+	add		%l4, %g2, %o2
 	mov		HV_MMU_IMMU, %o3
 	ta		HV_FAST_TRAP
 
 	mov		HV_FAST_MMU_MAP_PERM_ADDR, %o5
-	sethi		%hi(KERNBASE), %o0
+	sllx		%l5, 22, %g2
+	add		%l3, %g2, %o0
 	clr		%o1
-	sethi		%hi(kern_locked_tte_data), %o2
-	ldx		[%o2 + %lo(kern_locked_tte_data)], %o2
+	add		%l4, %g2, %o2
 	mov		HV_MMU_DMMU, %o3
 	ta		HV_FAST_TRAP
 
-	sethi		%hi(bigkernel), %g2
-	lduw		[%g2 + %lo(bigkernel)], %g2
-	brz,pt		%g2, after_lock_tlb
+	add		%l5, 1, %l5
+	cmp		%l5, %l6
+	bne,pt		%xcc, 1b
 	 nop
 
-	mov		HV_FAST_MMU_MAP_PERM_ADDR, %o5
-	sethi		%hi(KERNBASE + 0x400000), %o0
-	clr		%o1
-	sethi		%hi(kern_locked_tte_data), %o2
-	ldx		[%o2 + %lo(kern_locked_tte_data)], %o2
-	sethi		%hi(0x400000), %o3
-	add		%o2, %o3, %o2
-	mov		HV_MMU_IMMU, %o3
-	ta		HV_FAST_TRAP
-
-	mov		HV_FAST_MMU_MAP_PERM_ADDR, %o5
-	sethi		%hi(KERNBASE + 0x400000), %o0
-	clr		%o1
-	sethi		%hi(kern_locked_tte_data), %o2
-	ldx		[%o2 + %lo(kern_locked_tte_data)], %o2
-	sethi		%hi(0x400000), %o3
-	add		%o2, %o3, %o2
-	mov		HV_MMU_DMMU, %o3
-	ta		HV_FAST_TRAP
-
 after_lock_tlb:
 	wrpr		%g0, (PSTATE_PRIV | PSTATE_PEF), %pstate
 	wr		%g0, 0, %fprs
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 007f5317c0de..96da847023f3 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -42,6 +42,7 @@
 #endif
 #include <asm/prom.h>
 
+#include "entry.h"
 
 /* When an irrecoverable trap occurs at tl > 0, the trap entry
  * code logs the trap state registers at every level in the trap
@@ -77,11 +78,6 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
 	}
 }
 
-void do_call_debug(struct pt_regs *regs) 
-{ 
-	notify_die(DIE_CALL, "debug call", regs, 0, 255, SIGINT); 
-}
-
 void bad_trap(struct pt_regs *regs, long lvl)
 {
 	char buffer[32];
@@ -550,41 +546,6 @@ static unsigned long ecache_flush_physbase;
 static unsigned long ecache_flush_linesize;
 static unsigned long ecache_flush_size;
 
-/* WARNING: The error trap handlers in assembly know the precise
- *	    layout of the following structure.
- *
- * C-level handlers below use this information to log the error
- * and then determine how to recover (if possible).
- */
-struct cheetah_err_info {
-/*0x00*/u64 afsr;
-/*0x08*/u64 afar;
-
-	/* D-cache state */
-/*0x10*/u64 dcache_data[4];	/* The actual data	*/
-/*0x30*/u64 dcache_index;	/* D-cache index	*/
-/*0x38*/u64 dcache_tag;		/* D-cache tag/valid	*/
-/*0x40*/u64 dcache_utag;	/* D-cache microtag	*/
-/*0x48*/u64 dcache_stag;	/* D-cache snooptag	*/
-
-	/* I-cache state */
-/*0x50*/u64 icache_data[8];	/* The actual insns + predecode	*/
-/*0x90*/u64 icache_index;	/* I-cache index	*/
-/*0x98*/u64 icache_tag;		/* I-cache phys tag	*/
-/*0xa0*/u64 icache_utag;	/* I-cache microtag	*/
-/*0xa8*/u64 icache_stag;	/* I-cache snooptag	*/
-/*0xb0*/u64 icache_upper;	/* I-cache upper-tag	*/
-/*0xb8*/u64 icache_lower;	/* I-cache lower-tag	*/
-
-	/* E-cache state */
-/*0xc0*/u64 ecache_data[4];	/* 32 bytes from staging registers */
-/*0xe0*/u64 ecache_index;	/* E-cache index	*/
-/*0xe8*/u64 ecache_tag;		/* E-cache tag/state	*/
-
-/*0xf0*/u64 __pad[32 - 30];
-};
-#define CHAFSR_INVALID		((u64)-1L)
-
 /* This table is ordered in priority of errors and matches the
  * AFAR overwrite policy as well.
  */
@@ -758,10 +719,6 @@ static struct afsr_error_table __jalapeno_error_table[] = {
 static struct afsr_error_table *cheetah_error_table;
 static unsigned long cheetah_afsr_errors;
 
-/* This is allocated at boot time based upon the largest hardware
- * cpu ID in the system.  We allocate two entries per cpu, one for
- * TL==0 logging and one for TL >= 1 logging.
- */
 struct cheetah_err_info *cheetah_error_log;
 
 static inline struct cheetah_err_info *cheetah_get_error_log(unsigned long afsr)
@@ -2102,7 +2059,7 @@ void do_div0(struct pt_regs *regs)
 	force_sig_info(SIGFPE, &info, current);
 }
 
-void instruction_dump (unsigned int *pc)
+static void instruction_dump(unsigned int *pc)
 {
 	int i;
 
@@ -2115,7 +2072,7 @@ void instruction_dump (unsigned int *pc)
 	printk("\n");
 }
 
-static void user_instruction_dump (unsigned int __user *pc)
+static void user_instruction_dump(unsigned int __user *pc)
 {
 	int i;
 	unsigned int buf[9];
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index 7575aa371da8..b0de4c00b11a 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -117,16 +117,13 @@ tl0_f4o:	FILL_4_OTHER
 tl0_f5o:	FILL_5_OTHER
 tl0_f6o:	FILL_6_OTHER
 tl0_f7o:	FILL_7_OTHER
-tl0_sunos:	SUNOS_SYSCALL_TRAP
+tl0_resv100:	BTRAP(0x100)
 tl0_bkpt:	BREAKPOINT_TRAP
 tl0_divz:	TRAP(do_div0)
 tl0_flushw:	FLUSH_WINDOW_TRAP
-tl0_resv104:	BTRAP(0x104) BTRAP(0x105) BTRAP(0x106) BTRAP(0x107)
-		.globl tl0_solaris
-tl0_solaris:	SOLARIS_SYSCALL_TRAP
-tl0_resv109:	BTRAP(0x109)
-tl0_resv10a:	BTRAP(0x10a) BTRAP(0x10b) BTRAP(0x10c) BTRAP(0x10d) BTRAP(0x10e)
-tl0_resv10f:	BTRAP(0x10f)
+tl0_resv104:	BTRAP(0x104) BTRAP(0x105) BTRAP(0x106) BTRAP(0x107) BTRAP(0x108)
+tl0_resv109:	BTRAP(0x109) BTRAP(0x10a) BTRAP(0x10b) BTRAP(0x10c) BTRAP(0x10d)
+tl0_resv10e:	BTRAP(0x10e) BTRAP(0x10f)
 tl0_linux32:	LINUX_32BIT_SYSCALL_TRAP
 tl0_oldlinux64:	LINUX_64BIT_SYSCALL_TRAP
 tl0_resv112:	TRAP_UTRAP(UT_TRAP_INSTRUCTION_18,0x112) TRAP_UTRAP(UT_TRAP_INSTRUCTION_19,0x113)
@@ -139,8 +136,7 @@ tl0_resv11e:	TRAP_UTRAP(UT_TRAP_INSTRUCTION_30,0x11e) TRAP_UTRAP(UT_TRAP_INSTRUC
 tl0_getcc:	GETCC_TRAP
 tl0_setcc:	SETCC_TRAP
 tl0_getpsr:	TRAP(do_getpsr)
-tl0_resv123:	BTRAP(0x123) BTRAP(0x124) BTRAP(0x125) BTRAP(0x126)
-tl0_solindir:	INDIRECT_SOLARIS_SYSCALL(156)
+tl0_resv123:	BTRAP(0x123) BTRAP(0x124) BTRAP(0x125) BTRAP(0x126) BTRAP(0x127)
 tl0_resv128:	BTRAP(0x128) BTRAP(0x129) BTRAP(0x12a) BTRAP(0x12b) BTRAP(0x12c)
 tl0_resv12d:	BTRAP(0x12d) BTRAP(0x12e) BTRAP(0x12f) BTRAP(0x130) BTRAP(0x131)
 tl0_resv132:	BTRAP(0x132) BTRAP(0x133) BTRAP(0x134) BTRAP(0x135) BTRAP(0x136)
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index b5c30416fdac..f37078d96407 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -46,6 +46,7 @@
 #include <asm/prom.h>
 #include <asm/sstate.h>
 #include <asm/mdesc.h>
+#include <asm/cpudata.h>
 
 #define MAX_PHYS_ADDRESS	(1UL << 42UL)
 #define KPTE_BITMAP_CHUNK_SZ	(256UL * 1024UL * 1024UL)
@@ -166,7 +167,7 @@ unsigned long sparc64_kern_pri_context __read_mostly;
 unsigned long sparc64_kern_pri_nuc_bits __read_mostly;
 unsigned long sparc64_kern_sec_context __read_mostly;
 
-int bigkernel = 0;
+int num_kernel_image_mappings;
 
 #ifdef CONFIG_DEBUG_DCFLUSH
 atomic_t dcpage_flushes = ATOMIC_INIT(0);
@@ -572,7 +573,7 @@ static unsigned long kern_large_tte(unsigned long paddr);
 static void __init remap_kernel(void)
 {
 	unsigned long phys_page, tte_vaddr, tte_data;
-	int tlb_ent = sparc64_highest_locked_tlbent();
+	int i, tlb_ent = sparc64_highest_locked_tlbent();
 
 	tte_vaddr = (unsigned long) KERNBASE;
 	phys_page = (prom_boot_mapping_phys_low >> 22UL) << 22UL;
@@ -582,27 +583,20 @@ static void __init remap_kernel(void)
 
 	/* Now lock us into the TLBs via Hypervisor or OBP. */
 	if (tlb_type == hypervisor) {
-		hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU);
-		hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU);
-		if (bigkernel) {
-			tte_vaddr += 0x400000;
-			tte_data += 0x400000;
+		for (i = 0; i < num_kernel_image_mappings; i++) {
 			hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_DMMU);
 			hypervisor_tlb_lock(tte_vaddr, tte_data, HV_MMU_IMMU);
+			tte_vaddr += 0x400000;
+			tte_data += 0x400000;
 		}
 	} else {
-		prom_dtlb_load(tlb_ent, tte_data, tte_vaddr);
-		prom_itlb_load(tlb_ent, tte_data, tte_vaddr);
-		if (bigkernel) {
-			tlb_ent -= 1;
-			prom_dtlb_load(tlb_ent,
-				       tte_data + 0x400000, 
-				       tte_vaddr + 0x400000);
-			prom_itlb_load(tlb_ent,
-				       tte_data + 0x400000, 
-				       tte_vaddr + 0x400000);
+		for (i = 0; i < num_kernel_image_mappings; i++) {
+			prom_dtlb_load(tlb_ent - i, tte_data, tte_vaddr);
+			prom_itlb_load(tlb_ent - i, tte_data, tte_vaddr);
+			tte_vaddr += 0x400000;
+			tte_data += 0x400000;
 		}
-		sparc64_highest_unlocked_tlb_ent = tlb_ent - 1;
+		sparc64_highest_unlocked_tlb_ent = tlb_ent - i;
 	}
 	if (tlb_type == cheetah_plus) {
 		sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 |
@@ -1280,10 +1274,6 @@ void __cpuinit sun4v_ktsb_register(void)
 
 /* paging_init() sets up the page tables */
 
-extern void cheetah_ecache_flush_init(void);
-extern void sun4v_patch_tlb_handlers(void);
-
-extern void cpu_probe(void);
 extern void central_probe(void);
 
 static unsigned long last_valid_pfn;
@@ -1352,12 +1342,9 @@ void __init paging_init(void)
 	shift = kern_base + PAGE_OFFSET - ((unsigned long)KERNBASE);
 
 	real_end = (unsigned long)_end;
-	if ((real_end > ((unsigned long)KERNBASE + 0x400000)))
-		bigkernel = 1;
-	if ((real_end > ((unsigned long)KERNBASE + 0x800000))) {
-		prom_printf("paging_init: Kernel > 8MB, too large.\n");
-		prom_halt();
-	}
+	num_kernel_image_mappings = DIV_ROUND_UP(real_end - KERNBASE, 1 << 22);
+	printk("Kernel: Using %d locked TLB entries for main kernel image.\n",
+	       num_kernel_image_mappings);
 
 	/* Set kernel pgd to upper alias so physical page computations
 	 * work.
diff --git a/arch/sparc64/mm/tlb.c b/arch/sparc64/mm/tlb.c
index 3f10fc921b00..ae24919cba7c 100644
--- a/arch/sparc64/mm/tlb.c
+++ b/arch/sparc64/mm/tlb.c
@@ -23,9 +23,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers) = { 0, };
 
 void flush_tlb_pending(void)
 {
-	struct mmu_gather *mp = &__get_cpu_var(mmu_gathers);
-
-	preempt_disable();
+	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
 
 	if (mp->tlb_nr) {
 		flush_tsb_user(mp);
@@ -42,7 +40,7 @@ void flush_tlb_pending(void)
 		mp->tlb_nr = 0;
 	}
 
-	preempt_enable();
+	put_cpu_var(mmu_gathers);
 }
 
 void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig)
diff --git a/arch/sparc64/solaris/Makefile b/arch/sparc64/solaris/Makefile
deleted file mode 100644
index 8c8663033bfb..000000000000
--- a/arch/sparc64/solaris/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the Solaris binary emulation.
-#
-
-EXTRA_AFLAGS := -ansi
-
-solaris-objs := entry64.o fs.o misc.o signal.o systbl.o socket.o \
-		ioctl.o ipc.o socksys.o timod.o
-
-obj-$(CONFIG_SOLARIS_EMUL) += solaris.o
diff --git a/arch/sparc64/solaris/conv.h b/arch/sparc64/solaris/conv.h
deleted file mode 100644
index 5faf59a9de39..000000000000
--- a/arch/sparc64/solaris/conv.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* $Id: conv.h,v 1.4 1998/08/15 20:42:51 davem Exp $
- * conv.h: Utility macros for Solaris emulation
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
- 
-/* #define DEBUG_SOLARIS */
-#define DEBUG_SOLARIS_KMALLOC
-
-#ifndef __ASSEMBLY__
-
-#include <asm/unistd.h>
-
-/* Use this to get at 32-bit user passed pointers. */
-#define A(__x)				\
-({	unsigned long __ret;		\
-	__asm__ ("srl	%0, 0, %0"	\
-		 : "=r" (__ret)		\
-		 : "0" (__x));		\
-	(void __user *)__ret;		\
-})
-
-extern unsigned sys_call_table[];
-extern unsigned sys_call_table32[];
-extern unsigned sunos_sys_table[];
-
-#define SYS(name) ((long)sys_call_table[__NR_##name])
-#define SUNOS(x) ((long)sunos_sys_table[x])
-
-#ifdef DEBUG_SOLARIS
-#define SOLD(s) printk("%s,%d,%s(): %s\n",__FILE__,__LINE__,__FUNCTION__,(s))
-#define SOLDD(s) printk("solaris: "); printk s
-#else
-#define SOLD(s)
-#define SOLDD(s)
-#endif
-
-#endif /* __ASSEMBLY__ */
diff --git a/arch/sparc64/solaris/entry64.S b/arch/sparc64/solaris/entry64.S
deleted file mode 100644
index f170324e8bf2..000000000000
--- a/arch/sparc64/solaris/entry64.S
+++ /dev/null
@@ -1,223 +0,0 @@
-/* $Id: entry64.S,v 1.7 2002/02/09 19:49:31 davem Exp $
- * entry64.S:  Solaris syscall emulation entry point.
- *
- * Copyright (C) 1996,1997,1998 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1995,1997 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996 Miguel de Icaza      (miguel@nuclecu.unam.mx)
- */
-
-#include <linux/errno.h>
-
-#include <asm/head.h>
-#include <asm/asi.h>
-#include <asm/smp.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-#include <asm/signal.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/thread_info.h>
-
-#include "conv.h"
-
-#define NR_SYSCALLS	256
-
-	.text
-solaris_syscall_trace:
-	add		%sp, PTREGS_OFF, %o0
-	call		syscall_trace
-	 mov		0, %o1
-	srl		%i0, 0, %o0
-	mov		%i4, %o4
-	srl		%i1, 0, %o1
-	mov		%i5, %o5
-	andcc		%l3, 1, %g0
-	be,pt		%icc, 2f
-	 srl		%i2, 0, %o2
-	b,pt		%xcc, 2f
-	 add		%sp, PTREGS_OFF, %o0
-
-solaris_sucks:
-/* Solaris is a big system which needs to be able to do all the things
- * in Inf+1 different ways */
-	add		%i6, 0x5c, %o0
-	mov		%i0, %g1
-	mov		%i1, %i0
-	mov		%i2, %i1
-	srl		%o0, 0, %o0
-	mov		%i3, %i2
-	movrz		%g1, 256, %g1 /* Ensure we don't loop forever */
-	mov		%i4, %i3
-	mov		%i5, %i4
-	ba,pt		%xcc, solaris_sparc_syscall
-exen:	 lduwa		[%o0] ASI_S, %i5
-
-exenf:	ba,pt		%xcc, solaris_sparc_syscall
-	 clr		%i5
-
-/* For shared binaries, binfmt_elf32 already sets up personality
-   and exec_domain. This is to handle static binaries as well */
-solaris_reg:
-	call		solaris_register
-	 nop
-	ba,pt		%xcc, 1f
-	 mov		%i4, %o4
-
-linux_syscall_for_solaris:
-	sethi		%hi(sys_call_table32), %l6
-	or		%l6, %lo(sys_call_table32), %l6
-	sll		%l3, 2, %l4
-	ba,pt		%xcc, 10f
-	 lduw		[%l6 + %l4], %l3
-
-	/* Solaris system calls enter here... */
-	.align	32
-	.globl	solaris_sparc_syscall, entry64_personality_patch
-solaris_sparc_syscall:
-entry64_personality_patch:
-	ldub		[%g4 + 0x0], %l0
-	cmp		%g1, 255
-	bg,pn		%icc, solaris_unimplemented
-	 srl		%g1, 0, %g1
-	sethi		%hi(solaris_sys_table), %l7
-	or		%l7, %lo(solaris_sys_table), %l7
-	brz,pn		%g1, solaris_sucks
-	 mov		%i4, %o4
-	sll		%g1, 2, %l4
-	cmp		%l0, 1
-	bne,pn		%icc, solaris_reg
-1:	 srl		%i0, 0, %o0
-	lduw		[%l7 + %l4], %l3
-	srl		%i1, 0, %o1
-	ldx		[%g6 + TI_FLAGS], %l5
-	cmp		%l3, NR_SYSCALLS
-	bleu,a,pn	%xcc, linux_syscall_for_solaris
-	 nop
-	andcc		%l3, 1, %g0
-	bne,a,pn	%icc, 10f
-	 add		%sp, PTREGS_OFF, %o0
-10:	srl		%i2, 0, %o2
-	mov		%i5, %o5
-	andn		%l3, 3, %l7
-	andcc		%l5, _TIF_SYSCALL_TRACE, %g0				
-	bne,pn		%icc, solaris_syscall_trace		
-	 mov		%i0, %l5
-2:	call		%l7
-	 srl		%i3, 0, %o3
-ret_from_solaris:
-	stx		%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-	ldx		[%g6 + TI_FLAGS], %l6
-	sra		%o0, 0, %o0
-	mov		%ulo(TSTATE_XCARRY | TSTATE_ICARRY), %g2
-	ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %g3
-	cmp		%o0, -ERESTART_RESTARTBLOCK
-	sllx		%g2, 32, %g2
-	bgeu,pn		%xcc, 1f
-	 andcc		%l6, _TIF_SYSCALL_TRACE, %l6	
-
-	/* System call success, clear Carry condition code. */
-	andn		%g3, %g2, %g3
-	stx		%g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]	
-	bne,pn		%icc, solaris_syscall_trace2
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TNPC], %l1
-	andcc		%l1, 1, %g0
-	bne,pn		%icc, 2f
-	 clr		%l6
-	add		%l1, 0x4, %l2				         
-	stx		%l1, [%sp + PTREGS_OFF + PT_V9_TPC]	 ! pc = npc
-	call		rtrap
-	 stx		%l2, [%sp + PTREGS_OFF + PT_V9_TNPC] !npc = npc+4
-
-	/* When tnpc & 1, this comes from setcontext and we don't want to advance pc */
-2:	andn		%l1, 3, %l1
-	call		rtrap
-	 stx		%l1, [%sp + PTREGS_OFF + PT_V9_TNPC] !npc = npc&~3
-
-1:
-	/* System call failure, set Carry condition code.
-	 * Also, get abs(errno) to return to the process.
-	 */
-	sub		%g0, %o0, %o0
-	or		%g3, %g2, %g3
-	cmp		%o0, ERANGE	/* 0-ERANGE are identity mapped */
-	bleu,pt		%icc, 1f
-	 cmp		%o0, EMEDIUMTYPE
-	bgu,pn		%icc, 1f
-	 sethi		%hi(solaris_err_table), %l6
-	sll		%o0, 2, %o0
-	or		%l6, %lo(solaris_err_table), %l6
-	ldsw		[%l6 + %o0], %o0
-1:	stx		%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-	mov		1, %l6
-	stx		%g3, [%sp + PTREGS_OFF + PT_V9_TSTATE]
-	bne,pn		%icc, solaris_syscall_trace2
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TNPC], %l1
-	andcc		%l1, 1, %g0
-	bne,pn		%icc, 2b
-	 add		%l1, 0x4, %l2
-	stx		%l1, [%sp + PTREGS_OFF + PT_V9_TPC]  ! pc = npc
-	call		rtrap
-	 stx		%l2, [%sp + PTREGS_OFF + PT_V9_TNPC] !npc = npc+4 
-
-solaris_syscall_trace2:
-	add		%sp, PTREGS_OFF, %o0
-	call		syscall_trace
-	 mov		1, %o1
-	add		%l1, 0x4, %l2			/* npc = npc+4 */
-	andcc		%l1, 1, %g0
-	bne,pn		%icc, 2b
-	 nop
-	stx		%l1, [%sp + PTREGS_OFF + PT_V9_TPC]
-	call		rtrap
-	 stx		%l2, [%sp + PTREGS_OFF + PT_V9_TNPC]
-
-	/* This one is tricky, so that's why we do it in assembly */
-	.globl		solaris_sigsuspend
-solaris_sigsuspend:
-	call		do_sol_sigsuspend
-	 nop
-	brlz,pn		%o0, ret_from_solaris
-	 nop
-	call		sys_sigsuspend
-	 stx		%o0, [%sp + PTREGS_OFF + PT_V9_I0]
-	b,pt		%xcc, ret_from_solaris
-	 nop
-
-	.globl		solaris_getpid
-solaris_getpid:
-	call		sys_getppid
-	 nop
-	call		sys_getpid
-	 stx		%o0, [%sp + PTREGS_OFF + PT_V9_I1]
-	b,pt		%xcc, ret_from_solaris
-	 nop
-
-	.globl	solaris_getuid
-solaris_getuid:
-	call		sys_geteuid
-	 nop
-	call		sys_getuid
-	 stx		%o1, [%sp + PTREGS_OFF + PT_V9_I1]
-	b,pt		%xcc, ret_from_solaris
-	 nop
-
-	.globl	solaris_getgid
-solaris_getgid:
-	call		sys_getegid
-	 nop
-	call		sys_getgid
-	 stx		%o1, [%sp + PTREGS_OFF + PT_V9_I1]
-	b,pt		%xcc, ret_from_solaris
-	 nop
-
-	.globl		solaris_unimplemented
-solaris_unimplemented:
-	call		do_sol_unimplemented
-	 add		%sp, PTREGS_OFF, %o0
-	ba,pt		%xcc, ret_from_solaris
-	 nop
-
-	.section	__ex_table,"a"
-	.align		4
-	.word		exen, exenf
-
diff --git a/arch/sparc64/solaris/fs.c b/arch/sparc64/solaris/fs.c
deleted file mode 100644
index 7d035f0d3ae1..000000000000
--- a/arch/sparc64/solaris/fs.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/* $Id: fs.c,v 1.27 2002/02/08 03:57:14 davem Exp $
- * fs.c: fs related syscall emulation for Solaris
- *
- * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- *
- * 1999-08-19 Implemented solaris F_FREESP (truncate)
- *            fcntl, by Jason Rappleye (rappleye@ccr.buffalo.edu)
- */
-
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/capability.h>
-#include <linux/fs.h>
-#include <linux/namei.h>
-#include <linux/mm.h>
-#include <linux/file.h>
-#include <linux/stat.h>
-#include <linux/smp_lock.h>
-#include <linux/limits.h>
-#include <linux/resource.h>
-#include <linux/quotaops.h>
-#include <linux/mount.h>
-#include <linux/vfs.h>
-
-#include <asm/uaccess.h>
-#include <asm/string.h>
-#include <asm/ptrace.h>
-
-#include "conv.h"
-
-#define R3_VERSION	1
-#define R4_VERSION	2
-
-typedef struct {
-	s32	tv_sec;
-	s32	tv_nsec;
-} timestruct_t;
-
-struct sol_stat {
-	u32		st_dev;
-	s32		st_pad1[3];     /* network id */
-	u32		st_ino;
-	u32		st_mode;
-	u32		st_nlink;
-	u32		st_uid;
-	u32		st_gid;
-	u32		st_rdev;
-	s32		st_pad2[2];
-	s32		st_size;
-	s32		st_pad3;	/* st_size, off_t expansion */
-	timestruct_t	st_atime;
-	timestruct_t	st_mtime;
-	timestruct_t	st_ctime;
-	s32		st_blksize;
-	s32		st_blocks;
-	char		st_fstype[16];
-	s32		st_pad4[8];     /* expansion area */
-};
-
-struct sol_stat64 {
-	u32		st_dev;
-	s32		st_pad1[3];     /* network id */
-	u64		st_ino;
-	u32		st_mode;
-	u32		st_nlink;
-	u32		st_uid;
-	u32		st_gid;
-	u32		st_rdev;
-	s32		st_pad2[2];
-	s64		st_size;
-	timestruct_t	st_atime;
-	timestruct_t	st_mtime;
-	timestruct_t	st_ctime;
-	s64		st_blksize;
-	s32		st_blocks;
-	char		st_fstype[16];
-	s32		st_pad4[4];     /* expansion area */
-};
-
-#define UFSMAGIC (((unsigned)'u'<<24)||((unsigned)'f'<<16)||((unsigned)'s'<<8))
-
-static inline int putstat(struct sol_stat __user *ubuf, struct kstat *kbuf)
-{
-	u32 ino;
-
-	if (kbuf->size > MAX_NON_LFS ||
-	    !sysv_valid_dev(kbuf->dev) ||
-	    !sysv_valid_dev(kbuf->rdev))
-		return -EOVERFLOW;
-	ino = kbuf->ino;
-	if (sizeof(ino) < sizeof(kbuf->ino) && ino != kbuf->ino)
-		return -EOVERFLOW;
-	if (put_user (sysv_encode_dev(kbuf->dev), &ubuf->st_dev)	||
-	    __put_user (ino, &ubuf->st_ino)				||
-	    __put_user (kbuf->mode, &ubuf->st_mode)		||
-	    __put_user (kbuf->nlink, &ubuf->st_nlink)	||
-	    __put_user (kbuf->uid, &ubuf->st_uid)		||
-	    __put_user (kbuf->gid, &ubuf->st_gid)		||
-	    __put_user (sysv_encode_dev(kbuf->rdev), &ubuf->st_rdev)	||
-	    __put_user (kbuf->size, &ubuf->st_size)		||
-	    __put_user (kbuf->atime.tv_sec, &ubuf->st_atime.tv_sec)	||
-	    __put_user (kbuf->atime.tv_nsec, &ubuf->st_atime.tv_nsec)	||
-	    __put_user (kbuf->mtime.tv_sec, &ubuf->st_mtime.tv_sec)	||
-	    __put_user (kbuf->mtime.tv_nsec, &ubuf->st_mtime.tv_nsec)	||
-	    __put_user (kbuf->ctime.tv_sec, &ubuf->st_ctime.tv_sec)	||
-	    __put_user (kbuf->ctime.tv_nsec, &ubuf->st_ctime.tv_nsec)	||
-	    __put_user (kbuf->blksize, &ubuf->st_blksize)	||
-	    __put_user (kbuf->blocks, &ubuf->st_blocks)	||
-	    __put_user (UFSMAGIC, (unsigned __user *)ubuf->st_fstype))
-		return -EFAULT;
-	return 0;
-}
-
-static inline int putstat64(struct sol_stat64 __user *ubuf, struct kstat *kbuf)
-{
-	if (!sysv_valid_dev(kbuf->dev) || !sysv_valid_dev(kbuf->rdev))
-		return -EOVERFLOW;
-	if (put_user (sysv_encode_dev(kbuf->dev), &ubuf->st_dev)	||
-	    __put_user (kbuf->ino, &ubuf->st_ino)		||
-	    __put_user (kbuf->mode, &ubuf->st_mode)		||
-	    __put_user (kbuf->nlink, &ubuf->st_nlink)	||
-	    __put_user (kbuf->uid, &ubuf->st_uid)		||
-	    __put_user (kbuf->gid, &ubuf->st_gid)		||
-	    __put_user (sysv_encode_dev(kbuf->rdev), &ubuf->st_rdev)	||
-	    __put_user (kbuf->size, &ubuf->st_size)		||
-	    __put_user (kbuf->atime.tv_sec, &ubuf->st_atime.tv_sec)	||
-	    __put_user (kbuf->atime.tv_nsec, &ubuf->st_atime.tv_nsec)	||
-	    __put_user (kbuf->mtime.tv_sec, &ubuf->st_mtime.tv_sec)	||
-	    __put_user (kbuf->mtime.tv_nsec, &ubuf->st_mtime.tv_nsec)	||
-	    __put_user (kbuf->ctime.tv_sec, &ubuf->st_ctime.tv_sec)	||
-	    __put_user (kbuf->ctime.tv_nsec, &ubuf->st_ctime.tv_nsec)	||
-	    __put_user (kbuf->blksize, &ubuf->st_blksize)	||
-	    __put_user (kbuf->blocks, &ubuf->st_blocks)	||
-	    __put_user (UFSMAGIC, (unsigned __user *)ubuf->st_fstype))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage int solaris_stat(u32 filename, u32 statbuf)
-{
-	struct kstat s;
-	int ret = vfs_stat(A(filename), &s);
-	if (!ret)
-		return putstat(A(statbuf), &s);
-	return ret;
-}
-
-asmlinkage int solaris_xstat(int vers, u32 filename, u32 statbuf)
-{
-	/* Solaris doesn't bother with looking at vers, so we do neither */
-	return solaris_stat(filename, statbuf);
-}
-
-asmlinkage int solaris_stat64(u32 filename, u32 statbuf)
-{
-	struct kstat s;
-	int ret = vfs_stat(A(filename), &s);
-	if (!ret)
-		return putstat64(A(statbuf), &s);
-	return ret;
-}
-
-asmlinkage int solaris_lstat(u32 filename, u32 statbuf)
-{
-	struct kstat s;
-	int ret = vfs_lstat(A(filename), &s);
-	if (!ret)
-		return putstat(A(statbuf), &s);
-	return ret;
-}
-
-asmlinkage int solaris_lxstat(int vers, u32 filename, u32 statbuf)
-{
-	return solaris_lstat(filename, statbuf);
-}
-
-asmlinkage int solaris_lstat64(u32 filename, u32 statbuf)
-{
-	struct kstat s;
-	int ret = vfs_lstat(A(filename), &s);
-	if (!ret)
-		return putstat64(A(statbuf), &s);
-	return ret;
-}
-
-asmlinkage int solaris_fstat(unsigned int fd, u32 statbuf)
-{
-	struct kstat s;
-	int ret = vfs_fstat(fd, &s);
-	if (!ret)
-		return putstat(A(statbuf), &s);
-	return ret;
-}
-
-asmlinkage int solaris_fxstat(int vers, u32 fd, u32 statbuf)
-{
-	return solaris_fstat(fd, statbuf);
-}
-
-asmlinkage int solaris_fstat64(unsigned int fd, u32 statbuf)
-{
-	struct kstat s;
-	int ret = vfs_fstat(fd, &s);
-	if (!ret)
-		return putstat64(A(statbuf), &s);
-	return ret;
-}
-
-asmlinkage int solaris_mknod(u32 path, u32 mode, s32 dev)
-{
-	int (*sys_mknod)(const char __user *,int,unsigned) = 
-		(int (*)(const char __user *,int,unsigned))SYS(mknod);
-	int major = sysv_major(dev);
-	int minor = sysv_minor(dev);
-
-	/* minor is guaranteed to be OK for MKDEV, major might be not */
-	if (major > 0xfff)
-		return -EINVAL;
-	return sys_mknod(A(path), mode, new_encode_dev(MKDEV(major,minor)));
-}
-
-asmlinkage int solaris_xmknod(int vers, u32 path, u32 mode, s32 dev)
-{
-	return solaris_mknod(path, mode, dev);
-}
-
-asmlinkage int solaris_getdents64(unsigned int fd, void __user *dirent, unsigned int count)
-{
-	int (*sys_getdents)(unsigned int, void __user *, unsigned int) =
-		(int (*)(unsigned int, void __user *, unsigned int))SYS(getdents);
-		
-	return sys_getdents(fd, dirent, count);
-}
-
-/* This statfs thingie probably will go in the near future, but... */
-
-struct sol_statfs {
-	short	f_type;
-	s32	f_bsize;
-	s32	f_frsize;
-	s32	f_blocks;
-	s32	f_bfree;
-	u32	f_files;
-	u32	f_ffree;
-	char	f_fname[6];
-	char	f_fpack[6];
-};
-
-asmlinkage int solaris_statfs(u32 path, u32 buf, int len, int fstype)
-{
-	int ret;
-	struct statfs s;
-	mm_segment_t old_fs = get_fs();
-	int (*sys_statfs)(const char __user *,struct statfs __user *) = 
-		(int (*)(const char __user *,struct statfs __user *))SYS(statfs);
-	struct sol_statfs __user *ss = A(buf);
-	
-	if (len != sizeof(struct sol_statfs)) return -EINVAL;
-	if (!fstype) {
-		/* FIXME: mixing userland and kernel pointers */
-		set_fs (KERNEL_DS);
-		ret = sys_statfs(A(path), &s);
-		set_fs (old_fs);
-		if (!ret) {
-			if (put_user (s.f_type, &ss->f_type)		||
-			    __put_user (s.f_bsize, &ss->f_bsize)	||
-			    __put_user (0, &ss->f_frsize)		||
-			    __put_user (s.f_blocks, &ss->f_blocks)	||
-			    __put_user (s.f_bfree, &ss->f_bfree)	||
-			    __put_user (s.f_files, &ss->f_files)	||
-			    __put_user (s.f_ffree, &ss->f_ffree)	||
-			    __clear_user (&ss->f_fname, 12))
-				return -EFAULT;
-		}
-		return ret;
-	}
-/* Linux can't stat unmounted filesystems so we
- * simply lie and claim 100MB of 1GB is free. Sorry.
- */
-	if (put_user (fstype, &ss->f_type)		||
-	    __put_user (1024, &ss->f_bsize)		||
-	    __put_user (0, &ss->f_frsize)		||
-	    __put_user (1024*1024, &ss->f_blocks)	||
-	    __put_user (100*1024, &ss->f_bfree)		||
-	    __put_user (60000, &ss->f_files)		||
-	    __put_user (50000, &ss->f_ffree)		||
-	    __clear_user (&ss->f_fname, 12))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage int solaris_fstatfs(u32 fd, u32 buf, int len, int fstype)
-{
-	int ret;
-	struct statfs s;
-	mm_segment_t old_fs = get_fs();
-	int (*sys_fstatfs)(unsigned,struct statfs __user *) = 
-		(int (*)(unsigned,struct statfs __user *))SYS(fstatfs);
-	struct sol_statfs __user *ss = A(buf);
-	
-	if (len != sizeof(struct sol_statfs)) return -EINVAL;
-	if (!fstype) {
-		set_fs (KERNEL_DS);
-		ret = sys_fstatfs(fd, &s);
-		set_fs (old_fs);
-		if (!ret) {
-			if (put_user (s.f_type, &ss->f_type)		||
-			    __put_user (s.f_bsize, &ss->f_bsize)	||
-			    __put_user (0, &ss->f_frsize)		||
-			    __put_user (s.f_blocks, &ss->f_blocks)	||
-			    __put_user (s.f_bfree, &ss->f_bfree)	||
-			    __put_user (s.f_files, &ss->f_files)	||
-			    __put_user (s.f_ffree, &ss->f_ffree)	||
-			    __clear_user (&ss->f_fname, 12))
-				return -EFAULT;
-		}
-		return ret;
-	}
-	/* Otherwise fstatfs is the same as statfs */
-	return solaris_statfs(0, buf, len, fstype);
-}
-
-struct sol_statvfs {
-	u32	f_bsize;
-	u32	f_frsize;
-	u32	f_blocks;
-	u32	f_bfree;
-	u32	f_bavail;
-	u32	f_files;
-	u32	f_ffree;
-	u32	f_favail;
-	u32	f_fsid;
-	char	f_basetype[16];
-	u32	f_flag;
-	u32	f_namemax;
-	char	f_fstr[32];
-	u32	f_filler[16];
-};
-
-struct sol_statvfs64 {
-	u32	f_bsize;
-	u32	f_frsize;
-	u64	f_blocks;
-	u64	f_bfree;
-	u64	f_bavail;
-	u64	f_files;
-	u64	f_ffree;
-	u64	f_favail;
-	u32	f_fsid;
-	char	f_basetype[16];
-	u32	f_flag;
-	u32	f_namemax;
-	char	f_fstr[32];
-	u32	f_filler[16];
-};
-
-static int report_statvfs(struct vfsmount *mnt, struct inode *inode, u32 buf)
-{
-	struct kstatfs s;
-	int error;
-	struct sol_statvfs __user *ss = A(buf);
-
-	error = vfs_statfs(mnt->mnt_root, &s);
-	if (!error) {
-		const char *p = mnt->mnt_sb->s_type->name;
-		int i = 0;
-		int j = strlen (p);
-		
-		if (j > 15) j = 15;
-		if (IS_RDONLY(inode)) i = 1;
-		if (mnt->mnt_flags & MNT_NOSUID) i |= 2;
-		if (!sysv_valid_dev(inode->i_sb->s_dev))
-			return -EOVERFLOW;
-		if (put_user (s.f_bsize, &ss->f_bsize)		||
-		    __put_user (0, &ss->f_frsize)		||
-		    __put_user (s.f_blocks, &ss->f_blocks)	||
-		    __put_user (s.f_bfree, &ss->f_bfree)	||
-		    __put_user (s.f_bavail, &ss->f_bavail)	||
-		    __put_user (s.f_files, &ss->f_files)	||
-		    __put_user (s.f_ffree, &ss->f_ffree)	||
-		    __put_user (s.f_ffree, &ss->f_favail)	||
-		    __put_user (sysv_encode_dev(inode->i_sb->s_dev), &ss->f_fsid) ||
-		    __copy_to_user (ss->f_basetype,p,j)		||
-		    __put_user (0, (char __user *)&ss->f_basetype[j])	||
-		    __put_user (s.f_namelen, &ss->f_namemax)	||
-		    __put_user (i, &ss->f_flag)			||		    
-		    __clear_user (&ss->f_fstr, 32))
-			return -EFAULT;
-	}
-	return error;
-}
-
-static int report_statvfs64(struct vfsmount *mnt, struct inode *inode, u32 buf)
-{
-	struct kstatfs s;
-	int error;
-	struct sol_statvfs64 __user *ss = A(buf);
-			
-	error = vfs_statfs(mnt->mnt_root, &s);
-	if (!error) {
-		const char *p = mnt->mnt_sb->s_type->name;
-		int i = 0;
-		int j = strlen (p);
-		
-		if (j > 15) j = 15;
-		if (IS_RDONLY(inode)) i = 1;
-		if (mnt->mnt_flags & MNT_NOSUID) i |= 2;
-		if (!sysv_valid_dev(inode->i_sb->s_dev))
-			return -EOVERFLOW;
-		if (put_user (s.f_bsize, &ss->f_bsize)		||
-		    __put_user (0, &ss->f_frsize)		||
-		    __put_user (s.f_blocks, &ss->f_blocks)	||
-		    __put_user (s.f_bfree, &ss->f_bfree)	||
-		    __put_user (s.f_bavail, &ss->f_bavail)	||
-		    __put_user (s.f_files, &ss->f_files)	||
-		    __put_user (s.f_ffree, &ss->f_ffree)	||
-		    __put_user (s.f_ffree, &ss->f_favail)	||
-		    __put_user (sysv_encode_dev(inode->i_sb->s_dev), &ss->f_fsid) ||
-		    __copy_to_user (ss->f_basetype,p,j)		||
-		    __put_user (0, (char __user *)&ss->f_basetype[j])	||
-		    __put_user (s.f_namelen, &ss->f_namemax)	||
-		    __put_user (i, &ss->f_flag)			||		    
-		    __clear_user (&ss->f_fstr, 32))
-			return -EFAULT;
-	}
-	return error;
-}
-
-asmlinkage int solaris_statvfs(u32 path, u32 buf)
-{
-	struct nameidata nd;
-	int error;
-
-	error = user_path_walk(A(path),&nd);
-	if (!error) {
-		struct inode *inode = nd.path.dentry->d_inode;
-		error = report_statvfs(nd.path.mnt, inode, buf);
-		path_put(&nd.path);
-	}
-	return error;
-}
-
-asmlinkage int solaris_fstatvfs(unsigned int fd, u32 buf)
-{
-	struct file * file;
-	int error;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (file) {
-		error = report_statvfs(file->f_path.mnt, file->f_path.dentry->d_inode, buf);
-		fput(file);
-	}
-
-	return error;
-}
-
-asmlinkage int solaris_statvfs64(u32 path, u32 buf)
-{
-	struct nameidata nd;
-	int error;
-
-	lock_kernel();
-	error = user_path_walk(A(path), &nd);
-	if (!error) {
-		struct inode *inode = nd.path.dentry->d_inode;
-		error = report_statvfs64(nd.path.mnt, inode, buf);
-		path_put(&nd.path);
-	}
-	unlock_kernel();
-	return error;
-}
-
-asmlinkage int solaris_fstatvfs64(unsigned int fd, u32 buf)
-{
-	struct file * file;
-	int error;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (file) {
-		lock_kernel();
-		error = report_statvfs64(file->f_path.mnt, file->f_path.dentry->d_inode, buf);
-		unlock_kernel();
-		fput(file);
-	}
-	return error;
-}
-
-extern asmlinkage long sparc32_open(const char * filename, int flags, int mode);
-
-asmlinkage int solaris_open(u32 fname, int flags, u32 mode)
-{
-	const char *filename = (const char *)(long)fname;
-	int fl = flags & 0xf;
-
-	/* Translate flags first. */
-	if (flags & 0x2000) fl |= O_LARGEFILE;
-	if (flags & 0x8050) fl |= O_SYNC;
-	if (flags & 0x80) fl |= O_NONBLOCK;
-	if (flags & 0x100) fl |= O_CREAT;
-	if (flags & 0x200) fl |= O_TRUNC;
-	if (flags & 0x400) fl |= O_EXCL;
-	if (flags & 0x800) fl |= O_NOCTTY;
-	flags = fl;
-
-	return sparc32_open(filename, flags, mode);
-}
-
-#define SOL_F_SETLK	6
-#define SOL_F_SETLKW	7
-#define SOL_F_FREESP    11
-#define SOL_F_ISSTREAM  13
-#define SOL_F_GETLK     14
-#define SOL_F_PRIV      15
-#define SOL_F_NPRIV     16
-#define SOL_F_QUOTACTL  17
-#define SOL_F_BLOCKS    18
-#define SOL_F_BLKSIZE   19
-#define SOL_F_GETOWN    23
-#define SOL_F_SETOWN    24
-
-struct sol_flock {
-	short	l_type;
-	short	l_whence;
-	u32	l_start;
-	u32	l_len;
-	s32	l_sysid;
-	s32	l_pid;
-	s32	l_pad[4];
-};
-
-asmlinkage int solaris_fcntl(unsigned fd, unsigned cmd, u32 arg)
-{
-	int (*sys_fcntl)(unsigned,unsigned,unsigned long) = 
-		(int (*)(unsigned,unsigned,unsigned long))SYS(fcntl);
-	int ret, flags;
-
-	switch (cmd) {
-	case F_DUPFD:
-	case F_GETFD:
-	case F_SETFD: return sys_fcntl(fd, cmd, (unsigned long)arg);
-	case F_GETFL:
-		flags = sys_fcntl(fd, cmd, 0);
-		ret = flags & 0xf;
-		if (flags & O_SYNC) ret |= 0x8050;
-		if (flags & O_NONBLOCK) ret |= 0x80;
-		return ret;
-	case F_SETFL:
-		flags = arg & 0xf;
-		if (arg & 0x8050) flags |= O_SYNC;
-		if (arg & 0x80) flags |= O_NONBLOCK;
-		return sys_fcntl(fd, cmd, (long)flags);
-	case SOL_F_GETLK:
-	case SOL_F_SETLK:
-	case SOL_F_SETLKW:
-		{
-			struct flock f;
-			struct sol_flock __user *p = A(arg);
-			mm_segment_t old_fs = get_fs();
-
-			switch (cmd) {
-			case SOL_F_GETLK: cmd = F_GETLK; break;
-			case SOL_F_SETLK: cmd = F_SETLK; break;
-			case SOL_F_SETLKW: cmd = F_SETLKW; break;
-			}
-
-			if (get_user (f.l_type, &p->l_type) ||
-			    __get_user (f.l_whence, &p->l_whence) ||
-			    __get_user (f.l_start, &p->l_start) ||
-			    __get_user (f.l_len, &p->l_len) ||
-			    __get_user (f.l_pid, &p->l_sysid))
-				return -EFAULT;
-
-			set_fs(KERNEL_DS);
-			ret = sys_fcntl(fd, cmd, (unsigned long)&f);
-			set_fs(old_fs);
-
-			if (__put_user (f.l_type, &p->l_type) ||
-			    __put_user (f.l_whence, &p->l_whence) ||
-			    __put_user (f.l_start, &p->l_start) ||
-			    __put_user (f.l_len, &p->l_len) ||
-			    __put_user (f.l_pid, &p->l_pid) ||
-			    __put_user (0, &p->l_sysid))
-				return -EFAULT;
-
-			return ret;
-		}
-	case SOL_F_FREESP:
-	        { 
-		    int length;
-		    int (*sys_newftruncate)(unsigned int, unsigned long)=
-			    (int (*)(unsigned int, unsigned long))SYS(ftruncate);
-
-		    if (get_user(length, &((struct sol_flock __user *)A(arg))->l_start))
-			    return -EFAULT;
-
-		    return sys_newftruncate(fd, length);
-		}
-	};
-	return -EINVAL;
-}
-
-asmlinkage int solaris_ulimit(int cmd, int val)
-{
-	switch (cmd) {
-	case 1: /* UL_GETFSIZE - in 512B chunks */
-		return current->signal->rlim[RLIMIT_FSIZE].rlim_cur >> 9;
-	case 2: /* UL_SETFSIZE */
-		if ((unsigned long)val > (LONG_MAX>>9)) return -ERANGE;
-		val <<= 9;
-		task_lock(current->group_leader);
-		if (val > current->signal->rlim[RLIMIT_FSIZE].rlim_max) {
-			if (!capable(CAP_SYS_RESOURCE)) {
-				task_unlock(current->group_leader);
-				return -EPERM;
-			}
-			current->signal->rlim[RLIMIT_FSIZE].rlim_max = val;
-		}
-		current->signal->rlim[RLIMIT_FSIZE].rlim_cur = val;
-		task_unlock(current->group_leader);
-		return 0;
-	case 3: /* UL_GMEMLIM */
-		return current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	case 4: /* UL_GDESLIM */
-		return sysctl_nr_open;
-	}
-	return -EINVAL;
-}
-
-/* At least at the time I'm writing this, Linux doesn't have ACLs, so we
-   just fake this */
-asmlinkage int solaris_acl(u32 filename, int cmd, int nentries, u32 aclbufp)
-{
-	return -ENOSYS;
-}
-
-asmlinkage int solaris_facl(unsigned int fd, int cmd, int nentries, u32 aclbufp)
-{
-	return -ENOSYS;
-}
-
-asmlinkage int solaris_pread(unsigned int fd, char __user *buf, u32 count, u32 pos)
-{
-	ssize_t (*sys_pread64)(unsigned int, char __user *, size_t, loff_t) =
-		(ssize_t (*)(unsigned int, char __user *, size_t, loff_t))SYS(pread64);
-
-	return sys_pread64(fd, buf, count, (loff_t)pos);
-}
-
-asmlinkage int solaris_pwrite(unsigned int fd, char __user *buf, u32 count, u32 pos)
-{
-	ssize_t (*sys_pwrite64)(unsigned int, char __user *, size_t, loff_t) =
-		(ssize_t (*)(unsigned int, char __user *, size_t, loff_t))SYS(pwrite64);
-
-	return sys_pwrite64(fd, buf, count, (loff_t)pos);
-}
-
-/* POSIX.1 names */
-#define _PC_LINK_MAX    1
-#define _PC_MAX_CANON   2
-#define _PC_MAX_INPUT   3
-#define _PC_NAME_MAX    4
-#define _PC_PATH_MAX    5
-#define _PC_PIPE_BUF    6
-#define _PC_NO_TRUNC    7
-#define _PC_VDISABLE    8
-#define _PC_CHOWN_RESTRICTED    9
-/* POSIX.4 names */
-#define _PC_ASYNC_IO    10
-#define _PC_PRIO_IO     11
-#define _PC_SYNC_IO     12
-#define _PC_LAST        12
-
-/* This is not a real and complete implementation yet, just to keep
- * the easy Solaris binaries happy.
- */
-asmlinkage int solaris_fpathconf(int fd, int name)
-{
-	int ret;
-
-	switch(name) {
-	case _PC_LINK_MAX:
-		ret = LINK_MAX;
-		break;
-	case _PC_MAX_CANON:
-		ret = MAX_CANON;
-		break;
-	case _PC_MAX_INPUT:
-		ret = MAX_INPUT;
-		break;
-	case _PC_NAME_MAX:
-		ret = NAME_MAX;
-		break;
-	case _PC_PATH_MAX:
-		ret = PATH_MAX;
-		break;
-	case _PC_PIPE_BUF:
-		ret = PIPE_BUF;
-		break;
-	case _PC_CHOWN_RESTRICTED:
-		ret = 1;
-		break;
-	case _PC_NO_TRUNC:
-	case _PC_VDISABLE:
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	}
-	return ret;
-}
-
-asmlinkage int solaris_pathconf(u32 path, int name)
-{
-	return solaris_fpathconf(0, name);
-}
-
-/* solaris_llseek returns long long - quite difficult */
-asmlinkage long solaris_llseek(struct pt_regs *regs, u32 off_hi, u32 off_lo, int whence)
-{
-	int (*sys_llseek)(unsigned int, unsigned long, unsigned long, loff_t __user *, unsigned int) =
-		(int (*)(unsigned int, unsigned long, unsigned long, loff_t __user *, unsigned int))SYS(_llseek);
-	int ret;
-	mm_segment_t old_fs = get_fs();
-	loff_t retval;
-	
-	set_fs(KERNEL_DS);
-	ret = sys_llseek((unsigned int)regs->u_regs[UREG_I0], off_hi, off_lo, &retval, whence);
-	set_fs(old_fs);
-	if (ret < 0) return ret;
-	regs->u_regs[UREG_I1] = (u32)retval;
-	return (retval >> 32);
-}
-
-/* Have to mask out all but lower 3 bits */
-asmlinkage int solaris_access(u32 filename, long mode)
-{
-	int (*sys_access)(const char __user *, int) = 
-		(int (*)(const char __user *, int))SYS(access);
-		
-	return sys_access(A(filename), mode & 7);
-}
diff --git a/arch/sparc64/solaris/ioctl.c b/arch/sparc64/solaris/ioctl.c
deleted file mode 100644
index 8ad10a6d993b..000000000000
--- a/arch/sparc64/solaris/ioctl.c
+++ /dev/null
@@ -1,825 +0,0 @@
-/* $Id: ioctl.c,v 1.17 2002/02/08 03:57:14 davem Exp $
- * ioctl.c: Solaris ioctl emulation.
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997,1998 Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
- *
- * Streams & timod emulation based on code
- * Copyright (C) 1995, 1996 Mike Jagdis (jaggy@purplet.demon.co.uk)
- *
- * 1999-08-19 Implemented solaris 'm' (mag tape) and
- *            'O' (openprom) ioctls, by Jason Rappleye
- *             (rappleye@ccr.buffalo.edu)
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/syscalls.h>
-#include <linux/ioctl.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/netdevice.h>
-#include <linux/mtio.h>
-#include <linux/time.h>
-#include <linux/rcupdate.h>
-#include <linux/compat.h>
-
-#include <net/sock.h>
-#include <net/net_namespace.h>
-
-#include <asm/uaccess.h>
-#include <asm/termios.h>
-#include <asm/openpromio.h>
-
-#include "conv.h"
-#include "socksys.h"
-
-extern asmlinkage int compat_sys_ioctl(unsigned int fd, unsigned int cmd,
-	u32 arg);
-asmlinkage int solaris_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
-
-extern int timod_putmsg(unsigned int fd, char __user *ctl_buf, int ctl_len,
-			char __user *data_buf, int data_len, int flags);
-extern int timod_getmsg(unsigned int fd, char __user *ctl_buf, int ctl_maxlen, int __user *ctl_len,
-			char __user *data_buf, int data_maxlen, int __user *data_len, int *flags);
-
-/* termio* stuff {{{ */
-
-struct solaris_termios {
-	u32	c_iflag;
-	u32	c_oflag;
-	u32	c_cflag;
-	u32	c_lflag;
-	u8	c_cc[19];
-};
-
-struct solaris_termio {
-	u16	c_iflag;
-	u16	c_oflag;
-	u16	c_cflag;
-	u16	c_lflag;
-	s8	c_line;
-	u8	c_cc[8];
-};
-
-struct solaris_termiox {
-	u16	x_hflag;
-	u16	x_cflag;
-	u16	x_rflag[5];
-	u16	x_sflag;
-};
-
-static u32 solaris_to_linux_cflag(u32 cflag)
-{
-	cflag &= 0x7fdff000;
-	if (cflag & 0x200000) {
-		int baud = cflag & 0xf;
-		cflag &= ~0x20000f;
-		switch (baud) {
-		case 0: baud = B57600; break;
-		case 1: baud = B76800; break;
-		case 2: baud = B115200; break;
-		case 3: baud = B153600; break;
-		case 4: baud = B230400; break;
-		case 5: baud = B307200; break;
-		case 6: baud = B460800; break;
-		}
-		cflag |= CBAUDEX | baud;
-	}
-	return cflag;
-}
-
-static u32 linux_to_solaris_cflag(u32 cflag)
-{
-	cflag &= ~(CMSPAR | CIBAUD);
-	if (cflag & CBAUDEX) {
-		int baud = cflag & CBAUD;
-		cflag &= ~CBAUD;
-		switch (baud) {
-		case B57600: baud = 0; break;
-		case B76800: baud = 1; break;
-		case B115200: baud = 2; break;
-		case B153600: baud = 3; break;
-		case B230400: baud = 4; break;
-		case B307200: baud = 5; break;
-		case B460800: baud = 6; break;
-		case B614400: baud = 7; break;
-		case B921600: baud = 8; break;
-#if 0		
-		case B1843200: baud = 9; break;
-#endif
-		}
-		cflag |= 0x200000 | baud;
-	}
-	return cflag;
-}
-
-static inline int linux_to_solaris_termio(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	struct solaris_termio __user *p = A(arg);
-	int ret;
-	
-	ret = sys_ioctl(fd, cmd, (unsigned long)p);
-	if (!ret) {
-		u32 cflag;
-		
-		if (__get_user (cflag, &p->c_cflag))
-			return -EFAULT;
-		cflag = linux_to_solaris_cflag(cflag);
-		if (__put_user (cflag, &p->c_cflag))
-			return -EFAULT;
-	}
-	return ret;
-}
-
-static int solaris_to_linux_termio(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	int ret;
-	struct solaris_termio s;
-	mm_segment_t old_fs = get_fs();
-	
-	if (copy_from_user (&s, (struct solaris_termio __user *)A(arg), sizeof(struct solaris_termio)))
-		return -EFAULT;
-	s.c_cflag = solaris_to_linux_cflag(s.c_cflag);
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, cmd, (unsigned long)&s);
-	set_fs(old_fs);
-	return ret;
-}
-
-static inline int linux_to_solaris_termios(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	int ret;
-	struct solaris_termios s;
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(KERNEL_DS);	
-	ret = sys_ioctl(fd, cmd, (unsigned long)&s);
-	set_fs(old_fs);
-	if (!ret) {
-		struct solaris_termios __user *p = A(arg);
-		if (put_user (s.c_iflag, &p->c_iflag) ||
-		    __put_user (s.c_oflag, &p->c_oflag) ||
-		    __put_user (linux_to_solaris_cflag(s.c_cflag), &p->c_cflag) ||
-		    __put_user (s.c_lflag, &p->c_lflag) ||
-		    __copy_to_user (p->c_cc, s.c_cc, 16) ||
-		    __clear_user (p->c_cc + 16, 2))
-			return -EFAULT;
-	}
-	return ret;
-}
-
-static int solaris_to_linux_termios(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	int ret;
-	struct solaris_termios s;
-	struct solaris_termios __user *p = A(arg);
-	mm_segment_t old_fs = get_fs();
-
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, TCGETS, (unsigned long)&s);
-	set_fs(old_fs);
-	if (ret) return ret;
-	if (put_user (s.c_iflag, &p->c_iflag) ||
-	    __put_user (s.c_oflag, &p->c_oflag) ||
-	    __put_user (s.c_cflag, &p->c_cflag) ||
-	    __put_user (s.c_lflag, &p->c_lflag) ||
-	    __copy_from_user (s.c_cc, p->c_cc, 16))
-		return -EFAULT;
-	s.c_cflag = solaris_to_linux_cflag(s.c_cflag);
-	set_fs(KERNEL_DS);
-	ret = sys_ioctl(fd, cmd, (unsigned long)&s);
-	set_fs(old_fs);
-	return ret;
-}
-
-static inline int solaris_T(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	switch (cmd & 0xff) {
-	case 1: /* TCGETA */
-		return linux_to_solaris_termio(fd, TCGETA, arg);
-	case 2: /* TCSETA */
-		return solaris_to_linux_termio(fd, TCSETA, arg);
-	case 3: /* TCSETAW */
-		return solaris_to_linux_termio(fd, TCSETAW, arg);
-	case 4: /* TCSETAF */
-		return solaris_to_linux_termio(fd, TCSETAF, arg);
-	case 5: /* TCSBRK */
-		return sys_ioctl(fd, TCSBRK, arg);
-	case 6: /* TCXONC */
-		return sys_ioctl(fd, TCXONC, arg);
-	case 7: /* TCFLSH */
-		return sys_ioctl(fd, TCFLSH, arg);
-	case 13: /* TCGETS */
-		return linux_to_solaris_termios(fd, TCGETS, arg);
-	case 14: /* TCSETS */
-		return solaris_to_linux_termios(fd, TCSETS, arg);
-	case 15: /* TCSETSW */
-		return solaris_to_linux_termios(fd, TCSETSW, arg);
-	case 16: /* TCSETSF */
-		return solaris_to_linux_termios(fd, TCSETSF, arg);
-	case 103: /* TIOCSWINSZ */
-		return sys_ioctl(fd, TIOCSWINSZ, arg);
-	case 104: /* TIOCGWINSZ */
-		return sys_ioctl(fd, TIOCGWINSZ, arg);
-	}
-	return -ENOSYS;
-}
-
-static inline int solaris_t(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	switch (cmd & 0xff) {
-	case 20: /* TIOCGPGRP */
-		return sys_ioctl(fd, TIOCGPGRP, arg);
-	case 21: /* TIOCSPGRP */
-		return sys_ioctl(fd, TIOCSPGRP, arg);
-	}
-	return -ENOSYS;
-}
-
-/* }}} */
-
-/* A pseudo STREAMS support {{{ */
-
-struct strioctl {
-	int cmd, timeout, len;
-	u32 data;
-};
-
-struct solaris_si_sockparams {
-	int sp_family;
-	int sp_type;
-	int sp_protocol;
-};
-
-struct solaris_o_si_udata {
-	int tidusize;
-	int addrsize;
-	int optsize;
-	int etsdusize;
-	int servtype;
-	int so_state;
-	int so_options;
-	int tsdusize;
-};
-
-struct solaris_si_udata {
-	int tidusize;
-	int addrsize;
-	int optsize;
-	int etsdusize;
-	int servtype;
-	int so_state;
-	int so_options;
-	int tsdusize;
-	struct solaris_si_sockparams sockparams;
-};
-
-#define SOLARIS_MODULE_TIMOD    0
-#define SOLARIS_MODULE_SOCKMOD  1
-#define SOLARIS_MODULE_MAX      2
-
-static struct module_info {
-        const char *name;
-        /* can be expanded further if needed */
-} module_table[ SOLARIS_MODULE_MAX + 1 ] = {
-        /* the ordering here must match the module numbers above! */
-        { "timod" },
-        { "sockmod" },
-        { NULL }
-};
-
-static inline int solaris_sockmod(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	struct inode *ino;
-	struct fdtable *fdt;
-	/* I wonder which of these tests are superfluous... --patrik */
-	rcu_read_lock();
-	fdt = files_fdtable(current->files);
-	if (! fdt->fd[fd] ||
-	    ! fdt->fd[fd]->f_path.dentry ||
-	    ! (ino = fdt->fd[fd]->f_path.dentry->d_inode) ||
-	    ! S_ISSOCK(ino->i_mode)) {
-		rcu_read_unlock();
-		return TBADF;
-	}
-	rcu_read_unlock();
-	
-	switch (cmd & 0xff) {
-	case 109: /* SI_SOCKPARAMS */
-	{
-		struct solaris_si_sockparams si;
-		if (copy_from_user (&si, A(arg), sizeof(si)))
-			return (EFAULT << 8) | TSYSERR;
-
-		/* Should we modify socket ino->socket_i.ops and type? */
-		return 0;
-	}
-	case 110: /* SI_GETUDATA */
-	{
-		int etsdusize, servtype;
-		struct solaris_si_udata __user *p = A(arg);
-		switch (SOCKET_I(ino)->type) {
-		case SOCK_STREAM:
-			etsdusize = 1;
-			servtype = 2;
-			break;
-		default:
-			etsdusize = -2;
-			servtype = 3;
-			break;
-		}
-		if (put_user(16384, &p->tidusize) ||
-		    __put_user(sizeof(struct sockaddr), &p->addrsize) ||
-		    __put_user(-1, &p->optsize) ||
-		    __put_user(etsdusize, &p->etsdusize) ||
-		    __put_user(servtype, &p->servtype) ||
-		    __put_user(0, &p->so_state) ||
-		    __put_user(0, &p->so_options) ||
-		    __put_user(16384, &p->tsdusize) ||
-		    __put_user(SOCKET_I(ino)->ops->family, &p->sockparams.sp_family) ||
-		    __put_user(SOCKET_I(ino)->type, &p->sockparams.sp_type) ||
-		    __put_user(SOCKET_I(ino)->ops->family, &p->sockparams.sp_protocol))
-			return (EFAULT << 8) | TSYSERR;
-		return 0;
-	}
-	case 101: /* O_SI_GETUDATA */
-	{
-		int etsdusize, servtype;
-		struct solaris_o_si_udata __user *p = A(arg);
-		switch (SOCKET_I(ino)->type) {
-		case SOCK_STREAM:
-			etsdusize = 1;
-			servtype = 2;
-			break;
-		default:
-			etsdusize = -2;
-			servtype = 3;
-			break;
-		}
-		if (put_user(16384, &p->tidusize) ||
-		    __put_user(sizeof(struct sockaddr), &p->addrsize) ||
-		    __put_user(-1, &p->optsize) ||
-		    __put_user(etsdusize, &p->etsdusize) ||
-		    __put_user(servtype, &p->servtype) ||
-		    __put_user(0, &p->so_state) ||
-		    __put_user(0, &p->so_options) ||
-		    __put_user(16384, &p->tsdusize))
-			return (EFAULT << 8) | TSYSERR;
-		return 0;
-	}
-	case 102: /* SI_SHUTDOWN */
-	case 103: /* SI_LISTEN */
-	case 104: /* SI_SETMYNAME */
-	case 105: /* SI_SETPEERNAME */
-	case 106: /* SI_GETINTRANSIT */
-	case 107: /* SI_TCL_LINK */
-	case 108: /* SI_TCL_UNLINK */
-		;
-	}
-	return TNOTSUPPORT;
-}
-
-static inline int solaris_timod(unsigned int fd, unsigned int cmd, u32 arg,
-                                    int len, int __user *len_p)
-{
-	int ret;
-		
-	switch (cmd & 0xff) {
-	case 141: /* TI_OPTMGMT */
-	{
-		int i;
-		u32 prim;
-		SOLD("TI_OPMGMT entry");
-		ret = timod_putmsg(fd, A(arg), len, NULL, -1, 0);
-		SOLD("timod_putmsg() returned");
-		if (ret)
-			return (-ret << 8) | TSYSERR;
-		i = MSG_HIPRI;
-		SOLD("calling timod_getmsg()");
-		ret = timod_getmsg(fd, A(arg), len, len_p, NULL, -1, NULL, &i);
-		SOLD("timod_getmsg() returned");
-		if (ret)
-			return (-ret << 8) | TSYSERR;
-		SOLD("ret ok");
-		if (get_user(prim, (u32 __user *)A(arg)))
-			return (EFAULT << 8) | TSYSERR;
-		SOLD("got prim");
-		if (prim == T_ERROR_ACK) {
-			u32 tmp, tmp2;
-			SOLD("prim is T_ERROR_ACK");
-			if (get_user(tmp, (u32 __user *)A(arg)+3) ||
-			    get_user(tmp2, (u32 __user *)A(arg)+2))
-				return (EFAULT << 8) | TSYSERR;
-			return (tmp2 << 8) | tmp;
-		}
-		SOLD("TI_OPMGMT return 0");
-		return 0;
-	}
-	case 142: /* TI_BIND */
-	{
-		int i;
-		u32 prim;
-		SOLD("TI_BIND entry");
-		ret = timod_putmsg(fd, A(arg), len, NULL, -1, 0);
-		SOLD("timod_putmsg() returned");
-		if (ret)
-			return (-ret << 8) | TSYSERR;
-		len = 1024; /* Solaris allows arbitrary return size */
-		i = MSG_HIPRI;
-		SOLD("calling timod_getmsg()");
-		ret = timod_getmsg(fd, A(arg), len, len_p, NULL, -1, NULL, &i);
-		SOLD("timod_getmsg() returned");
-		if (ret)
-			return (-ret << 8) | TSYSERR;
-		SOLD("ret ok");
-		if (get_user(prim, (u32 __user *)A(arg)))
-			return (EFAULT << 8) | TSYSERR;
-		SOLD("got prim");
-		if (prim == T_ERROR_ACK) {
-			u32 tmp, tmp2;
-			SOLD("prim is T_ERROR_ACK");
-			if (get_user(tmp, (u32 __user *)A(arg)+3) ||
-			    get_user(tmp2, (u32 __user *)A(arg)+2))
-				return (EFAULT << 8) | TSYSERR;
-			return (tmp2 << 8) | tmp;
-		}
-		SOLD("no ERROR_ACK requested");
-		if (prim != T_OK_ACK)
-			return TBADSEQ;
-		SOLD("OK_ACK requested");
-		i = MSG_HIPRI;
-		SOLD("calling timod_getmsg()");
-		ret = timod_getmsg(fd, A(arg), len, len_p, NULL, -1, NULL, &i);
-		SOLD("timod_getmsg() returned");
-		if (ret)
-			return (-ret << 8) | TSYSERR;
-		SOLD("TI_BIND return ok");
-		return 0;
-	}
-	case 140: /* TI_GETINFO */
-	case 143: /* TI_UNBIND */
-	case 144: /* TI_GETMYNAME */
-	case 145: /* TI_GETPEERNAME */
-	case 146: /* TI_SETMYNAME */
-	case 147: /* TI_SETPEERNAME */
-		;
-	}
-	return TNOTSUPPORT;
-}
-
-static inline int solaris_S(struct file *filp, unsigned int fd, unsigned int cmd, u32 arg)
-{
-	char *p;
-	int ret;
-	mm_segment_t old_fs;
-	struct strioctl si;
-	struct inode *ino;
-        struct sol_socket_struct *sock;
-        struct module_info *mi;
-
-        ino = filp->f_path.dentry->d_inode;
-        if (!S_ISSOCK(ino->i_mode))
-		return -EBADF;
-        sock = filp->private_data;
-        if (! sock) {
-                printk("solaris_S: NULL private_data\n");
-                return -EBADF;
-        }
-        if (sock->magic != SOLARIS_SOCKET_MAGIC) {
-                printk("solaris_S: invalid magic\n");
-                return -EBADF;
-        }
-        
-
-	switch (cmd & 0xff) {
-	case 1: /* I_NREAD */
-		return -ENOSYS;
-	case 2: /* I_PUSH */
-        {
-		p = getname (A(arg));
-		if (IS_ERR (p))
-			return PTR_ERR(p);
-                ret = -EINVAL;
-                for (mi = module_table; mi->name; mi++) {
-                        if (strcmp(mi->name, p) == 0) {
-                                sol_module m;
-                                if (sock->modcount >= MAX_NR_STREAM_MODULES) {
-                                        ret = -ENXIO;
-                                        break;
-                                }
-                                m = (sol_module) (mi - module_table);
-                                sock->module[sock->modcount++] = m;
-                                ret = 0;
-                                break;
-                        }
-                }
-		putname (p);
-		return ret;
-        }
-	case 3: /* I_POP */
-                if (sock->modcount <= 0) return -EINVAL;
-                sock->modcount--;
-		return 0;
-        case 4: /* I_LOOK */
-        {
-        	const char *p;
-                if (sock->modcount <= 0) return -EINVAL;
-                p = module_table[(unsigned)sock->module[sock->modcount]].name;
-                if (copy_to_user (A(arg), p, strlen(p)))
-                	return -EFAULT;
-                return 0;
-        }
-	case 5: /* I_FLUSH */
-		return 0;
-	case 8: /* I_STR */
-		if (copy_from_user(&si, A(arg), sizeof(struct strioctl)))
-			return -EFAULT;
-                /* We ignore what module is actually at the top of stack. */
-		switch ((si.cmd >> 8) & 0xff) {
-		case 'I':
-                        return solaris_sockmod(fd, si.cmd, si.data);
-		case 'T':
-                        return solaris_timod(fd, si.cmd, si.data, si.len,
-				&((struct strioctl __user *)A(arg))->len);
-		default:
-			return solaris_ioctl(fd, si.cmd, si.data);
-		}
-	case 9: /* I_SETSIG */
-		return sys_ioctl(fd, FIOSETOWN, current->pid);
-	case 10: /* I_GETSIG */
-		old_fs = get_fs();
-		set_fs(KERNEL_DS);
-		sys_ioctl(fd, FIOGETOWN, (unsigned long)&ret);
-		set_fs(old_fs);
-		if (ret == current->pid) return 0x3ff;
-		else return -EINVAL;
-	case 11: /* I_FIND */
-        {
-                int i;
-		p = getname (A(arg));
-		if (IS_ERR (p))
-			return PTR_ERR(p);
-                ret = 0;
-                for (i = 0; i < sock->modcount; i++) {
-                        unsigned m = sock->module[i];
-                        if (strcmp(module_table[m].name, p) == 0) {
-                                ret = 1;
-                                break;
-                        } 
-                }
-		putname (p);
-		return ret;
-        }
-	case 19: /* I_SWROPT */
-	case 32: /* I_SETCLTIME */
-		return 0;	/* Lie */
-	}
-	return -ENOSYS;
-}
-
-static inline int solaris_s(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	switch (cmd & 0xff) {
-	case 0: /* SIOCSHIWAT */
-	case 2: /* SIOCSLOWAT */
-		return 0; /* We don't support them */
-	case 1: /* SIOCGHIWAT */
-	case 3: /* SIOCGLOWAT */
-		if (put_user (0, (u32 __user *)A(arg)))
-			return -EFAULT;
-		return 0; /* Lie */
-	case 7: /* SIOCATMARK */
-		return sys_ioctl(fd, SIOCATMARK, arg);
-	case 8: /* SIOCSPGRP */
-		return sys_ioctl(fd, SIOCSPGRP, arg);
-	case 9: /* SIOCGPGRP */
-		return sys_ioctl(fd, SIOCGPGRP, arg);
-	}
-	return -ENOSYS;
-}
-
-static inline int solaris_r(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	switch (cmd & 0xff) {
-	case 10: /* SIOCADDRT */
-		return compat_sys_ioctl(fd, SIOCADDRT, arg);
-	case 11: /* SIOCDELRT */
-		return compat_sys_ioctl(fd, SIOCDELRT, arg);
-	}
-	return -ENOSYS;
-}
-
-static inline int solaris_i(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	switch (cmd & 0xff) {
-	case 12: /* SIOCSIFADDR */
-		return compat_sys_ioctl(fd, SIOCSIFADDR, arg);
-	case 13: /* SIOCGIFADDR */
-		return compat_sys_ioctl(fd, SIOCGIFADDR, arg);
-	case 14: /* SIOCSIFDSTADDR */
-		return compat_sys_ioctl(fd, SIOCSIFDSTADDR, arg);
-	case 15: /* SIOCGIFDSTADDR */
-		return compat_sys_ioctl(fd, SIOCGIFDSTADDR, arg);
-	case 16: /* SIOCSIFFLAGS */
-		return compat_sys_ioctl(fd, SIOCSIFFLAGS, arg);
-	case 17: /* SIOCGIFFLAGS */
-		return compat_sys_ioctl(fd, SIOCGIFFLAGS, arg);
-	case 18: /* SIOCSIFMEM */
-		return compat_sys_ioctl(fd, SIOCSIFMEM, arg);
-	case 19: /* SIOCGIFMEM */
-		return compat_sys_ioctl(fd, SIOCGIFMEM, arg);
-	case 20: /* SIOCGIFCONF */
-		return compat_sys_ioctl(fd, SIOCGIFCONF, arg);
-	case 21: /* SIOCSIFMTU */
-		return compat_sys_ioctl(fd, SIOCSIFMTU, arg);
-	case 22: /* SIOCGIFMTU */
-		return compat_sys_ioctl(fd, SIOCGIFMTU, arg);
-	case 23: /* SIOCGIFBRDADDR */
-		return compat_sys_ioctl(fd, SIOCGIFBRDADDR, arg);
-	case 24: /* SIOCSIFBRDADDR */
-		return compat_sys_ioctl(fd, SIOCSIFBRDADDR, arg);
-	case 25: /* SIOCGIFNETMASK */
-		return compat_sys_ioctl(fd, SIOCGIFNETMASK, arg);
-	case 26: /* SIOCSIFNETMASK */
-		return compat_sys_ioctl(fd, SIOCSIFNETMASK, arg);
-	case 27: /* SIOCGIFMETRIC */
-		return compat_sys_ioctl(fd, SIOCGIFMETRIC, arg);
-	case 28: /* SIOCSIFMETRIC */
-		return compat_sys_ioctl(fd, SIOCSIFMETRIC, arg);
-	case 30: /* SIOCSARP */
-		return compat_sys_ioctl(fd, SIOCSARP, arg);
-	case 31: /* SIOCGARP */
-		return compat_sys_ioctl(fd, SIOCGARP, arg);
-	case 32: /* SIOCDARP */
-		return compat_sys_ioctl(fd, SIOCDARP, arg);
-	case 52: /* SIOCGETNAME */
-	case 53: /* SIOCGETPEER */
-		{
-			struct sockaddr uaddr;
-			int uaddr_len = sizeof(struct sockaddr), ret;
-			long args[3];
-			mm_segment_t old_fs = get_fs();
-			int (*sys_socketcall)(int, unsigned long *) =
-				(int (*)(int, unsigned long *))SYS(socketcall);
-			
-			args[0] = fd; args[1] = (long)&uaddr; args[2] = (long)&uaddr_len;
-			set_fs(KERNEL_DS);
-			ret = sys_socketcall(((cmd & 0xff) == 52) ? SYS_GETSOCKNAME : SYS_GETPEERNAME,
-					args);
-			set_fs(old_fs);
-			if (ret >= 0) {
-				if (copy_to_user(A(arg), &uaddr, uaddr_len))
-					return -EFAULT;
-			}
-			return ret;
-		}
-#if 0		
-	case 86: /* SIOCSOCKSYS */
-		return socksys_syscall(fd, arg);
-#endif		
-	case 87: /* SIOCGIFNUM */
-		{
-			struct net_device *d;
-			int i = 0;
-			
-			read_lock_bh(&dev_base_lock);
-			for_each_netdev(&init_net, d)
-				i++;
-			read_unlock_bh(&dev_base_lock);
-
-			if (put_user (i, (int __user *)A(arg)))
-				return -EFAULT;
-			return 0;
-		}
-	}
-	return -ENOSYS;
-}
-
-static int solaris_m(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	int ret;
-
-	switch (cmd & 0xff) {
-	case 1: /* MTIOCTOP */
-		ret = sys_ioctl(fd, MTIOCTOP, (unsigned long)&arg);
-		break;
-	case 2: /* MTIOCGET */
-		ret = sys_ioctl(fd, MTIOCGET, (unsigned long)&arg);
-		break;
-	case 3: /* MTIOCGETDRIVETYPE */
-	case 4: /* MTIOCPERSISTENT */
-	case 5: /* MTIOCPERSISTENTSTATUS */
-	case 6: /* MTIOCLRERR */
-	case 7: /* MTIOCGUARANTEEDORDER */
-	case 8: /* MTIOCRESERVE */
-	case 9: /* MTIOCRELEASE */
-	case 10: /* MTIOCFORCERESERVE */
-	case 13: /* MTIOCSTATE */
-	case 14: /* MTIOCREADIGNOREILI */
-	case 15: /* MTIOCREADIGNOREEOFS */
-	case 16: /* MTIOCSHORTFMK */
-	default:
-		ret = -ENOSYS; /* linux doesn't support these */
-		break;
-	};
-
-	return ret;
-}
-
-static int solaris_O(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	int ret = -EINVAL;
-
-	switch (cmd & 0xff) {
-	case 1: /* OPROMGETOPT */
-		ret = sys_ioctl(fd, OPROMGETOPT, arg);
-		break;
-	case 2: /* OPROMSETOPT */
-		ret = sys_ioctl(fd, OPROMSETOPT, arg);
-		break;
-	case 3: /* OPROMNXTOPT */
-		ret = sys_ioctl(fd, OPROMNXTOPT, arg);
-		break;
-	case 4: /* OPROMSETOPT2 */
-		ret = sys_ioctl(fd, OPROMSETOPT2, arg);
-		break;
-	case 5: /* OPROMNEXT */
-		ret = sys_ioctl(fd, OPROMNEXT, arg);
-		break;
-	case 6: /* OPROMCHILD */
-		ret = sys_ioctl(fd, OPROMCHILD, arg);
-		break;
-	case 7: /* OPROMGETPROP */
-		ret = sys_ioctl(fd, OPROMGETPROP, arg);
-		break;
-	case 8: /* OPROMNXTPROP */
-		ret = sys_ioctl(fd, OPROMNXTPROP, arg);
-		break;
-	case 9: /* OPROMU2P */
-		ret = sys_ioctl(fd, OPROMU2P, arg);
-		break;
-	case 10: /* OPROMGETCONS */
-		ret = sys_ioctl(fd, OPROMGETCONS, arg);
-		break;
-	case 11: /* OPROMGETFBNAME */
-		ret = sys_ioctl(fd, OPROMGETFBNAME, arg);
-		break;
-	case 12: /* OPROMGETBOOTARGS */
-		ret = sys_ioctl(fd, OPROMGETBOOTARGS, arg);
-		break;
-	case 13: /* OPROMGETVERSION */
-	case 14: /* OPROMPATH2DRV */
-	case 15: /* OPROMDEV2PROMNAME */
-	case 16: /* OPROMPROM2DEVNAME */
-	case 17: /* OPROMGETPROPLEN */
-	default:
-		ret = -EINVAL;
-		break;
-	};
-	return ret;
-}
-
-/* }}} */
-
-asmlinkage int solaris_ioctl(unsigned int fd, unsigned int cmd, u32 arg)
-{
-	struct file *filp;
-	int error = -EBADF;
-
-	filp = fget(fd);
-	if (!filp)
-		goto out;
-
-	lock_kernel();
-	error = -EFAULT;
-	switch ((cmd >> 8) & 0xff) {
-	case 'S': error = solaris_S(filp, fd, cmd, arg); break;
-	case 'T': error = solaris_T(fd, cmd, arg); break;
-	case 'i': error = solaris_i(fd, cmd, arg); break;
-	case 'r': error = solaris_r(fd, cmd, arg); break;
-	case 's': error = solaris_s(fd, cmd, arg); break;
-	case 't': error = solaris_t(fd, cmd, arg); break;
-	case 'f': error = sys_ioctl(fd, cmd, arg); break;
-	case 'm': error = solaris_m(fd, cmd, arg); break;
-	case 'O': error = solaris_O(fd, cmd, arg); break;
-	default:
-		error = -ENOSYS;
-		break;
-	}
-	unlock_kernel();
-	fput(filp);
-out:
-	if (error == -ENOSYS) {
-		unsigned char c = cmd>>8;
-		
-		if (c < ' ' || c > 126) c = '.';
-		printk("solaris_ioctl: Unknown cmd fd(%d) cmd(%08x '%c') arg(%08x)\n",
-		       (int)fd, (unsigned int)cmd, c, (unsigned int)arg);
-		error = -EINVAL;
-	}
-	return error;
-}
diff --git a/arch/sparc64/solaris/ipc.c b/arch/sparc64/solaris/ipc.c
deleted file mode 100644
index 499135fa7060..000000000000
--- a/arch/sparc64/solaris/ipc.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/* $Id: ipc.c,v 1.5 1999/12/09 00:41:00 davem Exp $
- * ipc.c: Solaris IPC emulation
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/mm.h>
-#include <linux/shm.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/ipc.h>
-
-#include <asm/uaccess.h>
-#include <asm/string.h>
-
-#include "conv.h"
-
-struct solaris_ipc_perm {
-	s32	uid;
-	s32	gid;
-	s32	cuid;
-	s32	cgid;
-	u32	mode;
-	u32	seq;
-	int	key;
-	s32	pad[4];
-};
-
-struct solaris_shmid_ds {
-	struct solaris_ipc_perm	shm_perm;
-	int			shm_segsz;
-	u32			shm_amp;
-	unsigned short		shm_lkcnt;
-	char			__padxx[2];
-	s32			shm_lpid;
-	s32			shm_cpid;
-	u32			shm_nattch;
-	u32			shm_cnattch;
-	s32			shm_atime;
-	s32			shm_pad1;
-	s32			shm_dtime;
-	s32			shm_pad2;
-	s32			shm_ctime;
-	s32			shm_pad3;
-	unsigned short		shm_cv;
-	char			shm_pad4[2];
-	u32			shm_sptas;
-	s32			shm_pad5[2];
-};
-
-asmlinkage long solaris_shmsys(int cmd, u32 arg1, u32 arg2, u32 arg3)
-{
-	int (*sys_ipc)(unsigned,int,int,unsigned long,void __user *,long) = 
-		(int (*)(unsigned,int,int,unsigned long,void __user *,long))SYS(ipc);
-	mm_segment_t old_fs;
-	unsigned long raddr;
-	int ret;
-		
-	switch (cmd) {
-	case 0: /* shmat */
-		old_fs = get_fs();
-		set_fs(KERNEL_DS);
-		ret = sys_ipc(SHMAT, arg1, arg3 & ~0x4000, (unsigned long)&raddr, A(arg2), 0);
-		set_fs(old_fs);
-		if (ret >= 0) return (u32)raddr;
-		else return ret;
-	case 1: /* shmctl */
-		switch (arg2) {
-		case 3: /* SHM_LOCK */
-		case 4: /* SHM_UNLOCK */
-			return sys_ipc(SHMCTL, arg1, (arg2 == 3) ? SHM_LOCK : SHM_UNLOCK, 0, NULL, 0);
-		case 10: /* IPC_RMID */
-			return sys_ipc(SHMCTL, arg1, IPC_RMID, 0, NULL, 0);
-		case 11: /* IPC_SET */
-			{
-				struct shmid_ds s;
-				struct solaris_shmid_ds __user *p = A(arg3);
-				
-				if (get_user (s.shm_perm.uid, &p->shm_perm.uid) ||
-				    __get_user (s.shm_perm.gid, &p->shm_perm.gid) || 
-				    __get_user (s.shm_perm.mode, &p->shm_perm.mode))
-					return -EFAULT;
-				old_fs = get_fs();
-				set_fs(KERNEL_DS);
-				ret = sys_ipc(SHMCTL, arg1, IPC_SET, 0, &s, 0);
-				set_fs(old_fs);
-				return ret;
-			}
-		case 12: /* IPC_STAT */
-			{
-				struct shmid_ds s;
-				struct solaris_shmid_ds __user *p = A(arg3);
-				
-				old_fs = get_fs();
-				set_fs(KERNEL_DS);
-				ret = sys_ipc(SHMCTL, arg1, IPC_SET, 0, &s, 0);
-				set_fs(old_fs);
-				if (put_user (s.shm_perm.uid, &(p->shm_perm.uid)) ||
-				    __put_user (s.shm_perm.gid, &(p->shm_perm.gid)) || 
-				    __put_user (s.shm_perm.cuid, &(p->shm_perm.cuid)) ||
-				    __put_user (s.shm_perm.cgid, &(p->shm_perm.cgid)) || 
-				    __put_user (s.shm_perm.mode, &(p->shm_perm.mode)) ||
-				    __put_user (s.shm_perm.seq, &(p->shm_perm.seq)) ||
-				    __put_user (s.shm_perm.key, &(p->shm_perm.key)) ||
-				    __put_user (s.shm_segsz, &(p->shm_segsz)) ||
-				    __put_user (s.shm_lpid, &(p->shm_lpid)) ||
-				    __put_user (s.shm_cpid, &(p->shm_cpid)) ||
-				    __put_user (s.shm_nattch, &(p->shm_nattch)) ||
-				    __put_user (s.shm_atime, &(p->shm_atime)) ||
-				    __put_user (s.shm_dtime, &(p->shm_dtime)) ||
-				    __put_user (s.shm_ctime, &(p->shm_ctime)))
-					return -EFAULT;
-				return ret;
-			}
-		default: return -EINVAL;
-		}
-	case 2: /* shmdt */
-		return sys_ipc(SHMDT, 0, 0, 0, A(arg1), 0);
-	case 3: /* shmget */
-		return sys_ipc(SHMGET, arg1, arg2, arg3, NULL, 0);
-	}
-	return -EINVAL;
-}
diff --git a/arch/sparc64/solaris/misc.c b/arch/sparc64/solaris/misc.c
deleted file mode 100644
index d3e48e9701bf..000000000000
--- a/arch/sparc64/solaris/misc.c
+++ /dev/null
@@ -1,786 +0,0 @@
-/* $Id: misc.c,v 1.36 2002/02/09 19:49:31 davem Exp $
- * misc.c: Miscellaneous syscall emulation for Solaris
- *
- * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#include <linux/module.h> 
-#include <linux/types.h>
-#include <linux/utsname.h>
-#include <linux/limits.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/tty.h>
-#include <linux/mman.h>
-#include <linux/file.h>
-#include <linux/timex.h>
-#include <linux/major.h>
-#include <linux/compat.h>
-
-#include <asm/uaccess.h>
-#include <asm/string.h>
-#include <asm/oplib.h>
-#include <asm/idprom.h>
-#include <asm/smp.h>
-#include <asm/prom.h>
-
-#include "conv.h"
-
-/* Conversion from Linux to Solaris errnos. 0-34 are identity mapped.
-   Some Linux errnos (EPROCLIM, EDOTDOT, ERREMOTE, EUCLEAN, ENOTNAM, 
-   ENAVAIL, EISNAM, EREMOTEIO, ENOMEDIUM, EMEDIUMTYPE) have no Solaris
-   equivalents. I return EINVAL in that case, which is very wrong. If
-   someone suggest a better value for them, you're welcomed.
-   On the other side, Solaris ECANCELED and ENOTSUP have no Linux equivalents,
-   but that doesn't matter here. --jj */
-int solaris_err_table[] = {
-/* 0 */  0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
-/* 10 */  10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
-/* 20 */  20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
-/* 30 */  30, 31, 32, 33, 34, 22, 150, 149, 95, 96,
-/* 40 */  97, 98, 99, 120, 121, 122, 123, 124, 125, 126, 
-/* 50 */ 127, 128, 129, 130, 131, 132, 133, 134, 143, 144,
-/* 60 */ 145, 146, 90, 78, 147, 148, 93, 22, 94, 49,
-/* 70 */ 151, 66, 60, 62, 63, 35, 77, 36, 45, 46, 
-/* 80 */ 64, 22, 67, 68, 69, 70, 71, 74, 22, 82, 
-/* 90 */ 89, 92, 79, 81, 37, 38, 39, 40, 41, 42,
-/* 100 */ 43, 44, 50, 51, 52, 53, 54, 55, 56, 57,
-/* 110 */ 87, 61, 84, 65, 83, 80, 91, 22, 22, 22,
-/* 120 */ 22, 22, 88, 86, 85, 22, 22,
-};
-
-#define SOLARIS_NR_OPEN	256
-
-static u32 do_solaris_mmap(u32 addr, u32 len, u32 prot, u32 flags, u32 fd, u64 off)
-{
-	struct file *file = NULL;
-	unsigned long retval, ret_type;
-
-	/* Do we need it here? */
-	set_personality(PER_SVR4);
-	if (flags & MAP_NORESERVE) {
-		static int cnt;
-		
-		if (cnt < 5) {
-			printk("%s:  unimplemented Solaris MAP_NORESERVE mmap() flag\n",
-			       current->comm);
-			cnt++;
-		}
-		flags &= ~MAP_NORESERVE;
-	}
-	retval = -EBADF;
-	if(!(flags & MAP_ANONYMOUS)) {
-		if(fd >= SOLARIS_NR_OPEN)
-			goto out;
- 		file = fget(fd);
-		if (!file)
-			goto out;
-		else {
-			struct inode * inode = file->f_path.dentry->d_inode;
-			if(imajor(inode) == MEM_MAJOR &&
-			   iminor(inode) == 5) {
-				flags |= MAP_ANONYMOUS;
-				fput(file);
-				file = NULL;
-			}
-		}
-	}
-
-	retval = -EINVAL;
-	len = PAGE_ALIGN(len);
-	if(!(flags & MAP_FIXED))
-		addr = 0;
-	else if (len > STACK_TOP32 || addr > STACK_TOP32 - len)
-		goto out_putf;
-	ret_type = flags & _MAP_NEW;
-	flags &= ~_MAP_NEW;
-
-	down_write(&current->mm->mmap_sem);
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	retval = do_mmap(file,
-			 (unsigned long) addr, (unsigned long) len,
-			 (unsigned long) prot, (unsigned long) flags, off);
-	up_write(&current->mm->mmap_sem);
-	if(!ret_type)
-		retval = ((retval < STACK_TOP32) ? 0 : retval);
-	                        
-out_putf:
-	if (file)
-		fput(file);
-out:
-	return (u32) retval;
-}
-
-asmlinkage u32 solaris_mmap(u32 addr, u32 len, u32 prot, u32 flags, u32 fd, u32 off)
-{
-	return do_solaris_mmap(addr, len, prot, flags, fd, (u64) off);
-}
-
-asmlinkage u32 solaris_mmap64(struct pt_regs *regs, u32 len, u32 prot, u32 flags, u32 fd, u32 offhi)
-{
-	u32 offlo;
-	
-	if (regs->u_regs[UREG_G1]) {
-		if (get_user (offlo, (u32 __user *)(long)((u32)regs->u_regs[UREG_I6] + 0x5c)))
-			return -EFAULT;
-	} else {
-		if (get_user (offlo, (u32 __user *)(long)((u32)regs->u_regs[UREG_I6] + 0x60)))
-			return -EFAULT;
-	}
-	return do_solaris_mmap((u32)regs->u_regs[UREG_I0], len, prot, flags, fd, (((u64)offhi)<<32)|offlo);
-}
-
-asmlinkage int solaris_brk(u32 brk)
-{
-	int (*sunos_brk)(u32) = (int (*)(u32))SUNOS(17);
-	
-	return sunos_brk(brk);
-}
-
-static int __set_utsfield(char __user *to, int to_size,
-			  const char *from, int from_size,
-			  int dotchop, int countfrom)
-{
-	int len = countfrom ? (to_size > from_size ?
-			       from_size : to_size) : to_size;
-	int off;
-
-	if (copy_to_user(to, from, len))
-		return -EFAULT;
-
-	off = len < to_size? len: len - 1;
-	if (dotchop) {
-		const char *p = strnchr(from, len, '.');
-		if (p) off = p - from;
-	}
-
-	if (__put_user('\0', to + off))
-		return -EFAULT;
-
-	return 0;
-}
-
-#define set_utsfield(to, from, dotchop, countfrom) \
-	__set_utsfield((to), sizeof(to), \
-		       (from), sizeof(from), \
-		       (dotchop), (countfrom))
-
-struct sol_uname {
-	char sysname[9];
-	char nodename[9];
-	char release[9];
-	char version[9];
-	char machine[9];
-};
-
-struct sol_utsname {
-	char sysname[257];
-	char nodename[257];
-	char release[257];
-	char version[257];
-	char machine[257];
-};
-
-static char *machine(void)
-{
-	switch (sparc_cpu_model) {
-	case sun4: return "sun4";
-	case sun4c: return "sun4c";
-	case sun4e: return "sun4e";
-	case sun4m: return "sun4m";
-	case sun4d: return "sun4d";
-	case sun4u: return "sun4u";
-	default: return "sparc";
-	}
-}
-
-static char *platform(char *buffer, int sz)
-{
-	struct device_node *dp = of_find_node_by_path("/");
-	int len;
-
-	*buffer = 0;
-	len = strlen(dp->name);
-	if (len > sz)
-		len = sz;
-	memcpy(buffer, dp->name, len);
-	buffer[len] = 0;
-	if (*buffer) {
-		char *p;
-
-		for (p = buffer; *p; p++)
-			if (*p == '/' || *p == ' ') *p = '_';
-		return buffer;
-	}
-
-	return "sun4u";
-}
-
-static char *serial(char *buffer, int sz)
-{
-	struct device_node *dp = of_find_node_by_path("/options");
-	int len;
-
-	*buffer = 0;
-	if (dp) {
-		const char *val =
-			of_get_property(dp, "system-board-serial#", &len);
-
-		if (val && len > 0) {
-			if (len > sz)
-				len = sz;
-			memcpy(buffer, val, len);
-			buffer[len] = 0;
-		}
-	}
-	if (!*buffer)
-		return "4512348717234";
-	else
-		return buffer;
-}
-
-asmlinkage int solaris_utssys(u32 buf, u32 flags, int which, u32 buf2)
-{
-	struct sol_uname __user *v = A(buf);
-	int err;
-
-	switch (which) {
-	case 0:	/* old uname */
-		/* Let's cheat */
-		err  = set_utsfield(v->sysname, "SunOS", 1, 0);
-		down_read(&uts_sem);
-		err |= set_utsfield(v->nodename, utsname()->nodename,
-				    1, 1);
-		up_read(&uts_sem);
-		err |= set_utsfield(v->release, "2.6", 0, 0);
-		err |= set_utsfield(v->version, "Generic", 0, 0);
-		err |= set_utsfield(v->machine, machine(), 0, 0);
-		return (err ? -EFAULT : 0);
-	case 2: /* ustat */
-		return -ENOSYS;
-	case 3: /* fusers */
-		return -ENOSYS;
-	default:
-		return -ENOSYS;
-	}
-}
-
-asmlinkage int solaris_utsname(u32 buf)
-{
-	struct sol_utsname __user *v = A(buf);
-	int err;
-
-	/* Why should we not lie a bit? */
-	down_read(&uts_sem);
-	err  = set_utsfield(v->sysname, "SunOS", 0, 0);
-	err |= set_utsfield(v->nodename, utsname()->nodename, 1, 1);
-	err |= set_utsfield(v->release, "5.6", 0, 0);
-	err |= set_utsfield(v->version, "Generic", 0, 0);
-	err |= set_utsfield(v->machine, machine(), 0, 0);
-	up_read(&uts_sem);
-
-	return (err ? -EFAULT : 0);
-}
-
-#define SI_SYSNAME		1       /* return name of operating system */
-#define SI_HOSTNAME		2       /* return name of node */
-#define SI_RELEASE		3       /* return release of operating system */
-#define SI_VERSION		4       /* return version field of utsname */
-#define SI_MACHINE		5       /* return kind of machine */
-#define SI_ARCHITECTURE		6       /* return instruction set arch */
-#define SI_HW_SERIAL		7       /* return hardware serial number */
-#define SI_HW_PROVIDER		8       /* return hardware manufacturer */
-#define SI_SRPC_DOMAIN		9       /* return secure RPC domain */
-#define SI_PLATFORM		513     /* return platform identifier */
-
-asmlinkage int solaris_sysinfo(int cmd, u32 buf, s32 count)
-{
-	char *p, *q, *r;
-	char buffer[256];
-	int len;
-	
-	/* Again, we cheat :)) */
-	switch (cmd) {
-	case SI_SYSNAME: r = "SunOS"; break;
-	case SI_HOSTNAME:
-		r = buffer + 256;
-		down_read(&uts_sem);
-		for (p = utsname()->nodename, q = buffer;
-		     q < r && *p && *p != '.'; *q++ = *p++);
-		up_read(&uts_sem);
-		*q = 0;
-		r = buffer;
-		break;
-	case SI_RELEASE: r = "5.6"; break;
-	case SI_MACHINE: r = machine(); break;
-	case SI_ARCHITECTURE: r = "sparc"; break;
-	case SI_HW_PROVIDER: r = "Sun_Microsystems"; break;
-	case SI_HW_SERIAL: r = serial(buffer, sizeof(buffer)); break;
-	case SI_PLATFORM: r = platform(buffer, sizeof(buffer)); break;
-	case SI_SRPC_DOMAIN: r = ""; break;
-	case SI_VERSION: r = "Generic"; break;
-	default: return -EINVAL;
-	}
-	len = strlen(r) + 1;
-	if (count < len) {
-		if (copy_to_user(A(buf), r, count - 1) ||
-		    __put_user(0, (char __user *)A(buf) + count - 1))
-			return -EFAULT;
-	} else {
-		if (copy_to_user(A(buf), r, len))
-			return -EFAULT;
-	}
-	return len;
-}
-
-#define	SOLARIS_CONFIG_NGROUPS			2
-#define	SOLARIS_CONFIG_CHILD_MAX		3
-#define	SOLARIS_CONFIG_OPEN_FILES		4
-#define	SOLARIS_CONFIG_POSIX_VER		5
-#define	SOLARIS_CONFIG_PAGESIZE			6
-#define	SOLARIS_CONFIG_CLK_TCK			7
-#define	SOLARIS_CONFIG_XOPEN_VER		8
-#define	SOLARIS_CONFIG_PROF_TCK			10
-#define	SOLARIS_CONFIG_NPROC_CONF		11
-#define	SOLARIS_CONFIG_NPROC_ONLN		12
-#define	SOLARIS_CONFIG_AIO_LISTIO_MAX		13
-#define	SOLARIS_CONFIG_AIO_MAX			14
-#define	SOLARIS_CONFIG_AIO_PRIO_DELTA_MAX	15
-#define	SOLARIS_CONFIG_DELAYTIMER_MAX		16
-#define	SOLARIS_CONFIG_MQ_OPEN_MAX		17
-#define	SOLARIS_CONFIG_MQ_PRIO_MAX		18
-#define	SOLARIS_CONFIG_RTSIG_MAX		19
-#define	SOLARIS_CONFIG_SEM_NSEMS_MAX		20
-#define	SOLARIS_CONFIG_SEM_VALUE_MAX		21
-#define	SOLARIS_CONFIG_SIGQUEUE_MAX		22
-#define	SOLARIS_CONFIG_SIGRT_MIN		23
-#define	SOLARIS_CONFIG_SIGRT_MAX		24
-#define	SOLARIS_CONFIG_TIMER_MAX		25
-#define	SOLARIS_CONFIG_PHYS_PAGES		26
-#define	SOLARIS_CONFIG_AVPHYS_PAGES		27
-
-asmlinkage int solaris_sysconf(int id)
-{
-	switch (id) {
-	case SOLARIS_CONFIG_NGROUPS:	return NGROUPS_MAX;
-	case SOLARIS_CONFIG_CHILD_MAX:
-		return current->signal->rlim[RLIMIT_NPROC].rlim_cur;
-	case SOLARIS_CONFIG_OPEN_FILES:
-		return current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-	case SOLARIS_CONFIG_POSIX_VER:	return 199309;
-	case SOLARIS_CONFIG_PAGESIZE:	return PAGE_SIZE;
-	case SOLARIS_CONFIG_XOPEN_VER:	return 3;
-	case SOLARIS_CONFIG_CLK_TCK:
-	case SOLARIS_CONFIG_PROF_TCK:
-		return sparc64_get_clock_tick(smp_processor_id());
-#ifdef CONFIG_SMP	
-	case SOLARIS_CONFIG_NPROC_CONF:	return NR_CPUS;
-	case SOLARIS_CONFIG_NPROC_ONLN:	return num_online_cpus();
-#else
-	case SOLARIS_CONFIG_NPROC_CONF:	return 1;
-	case SOLARIS_CONFIG_NPROC_ONLN:	return 1;
-#endif
-	case SOLARIS_CONFIG_SIGRT_MIN:		return 37;
-	case SOLARIS_CONFIG_SIGRT_MAX:		return 44;
-	case SOLARIS_CONFIG_PHYS_PAGES:
-	case SOLARIS_CONFIG_AVPHYS_PAGES:
-		{
-			struct sysinfo s;
-			
-			si_meminfo(&s);
-			if (id == SOLARIS_CONFIG_PHYS_PAGES)
-				return s.totalram >>= PAGE_SHIFT;
-			else
-				return s.freeram >>= PAGE_SHIFT;
-		}
-	/* XXX support these as well -jj */
-	case SOLARIS_CONFIG_AIO_LISTIO_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_AIO_MAX:		return -EINVAL;
-	case SOLARIS_CONFIG_AIO_PRIO_DELTA_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_DELAYTIMER_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_MQ_OPEN_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_MQ_PRIO_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_RTSIG_MAX:		return -EINVAL;
-	case SOLARIS_CONFIG_SEM_NSEMS_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_SEM_VALUE_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_SIGQUEUE_MAX:	return -EINVAL;
-	case SOLARIS_CONFIG_TIMER_MAX:		return -EINVAL;
-	default: return -EINVAL;
-	}
-}
-
-asmlinkage int solaris_procids(int cmd, s32 pid, s32 pgid)
-{
-	int ret;
-	
-	switch (cmd) {
-	case 0: /* getpgrp */
-		return task_pgrp_vnr(current);
-	case 1: /* setpgrp */
-		{
-			int (*sys_setpgid)(pid_t,pid_t) =
-				(int (*)(pid_t,pid_t))SYS(setpgid);
-				
-			/* can anyone explain me the difference between
-			   Solaris setpgrp and setsid? */
-			ret = sys_setpgid(0, 0);
-			if (ret) return ret;
-			proc_clear_tty(current);
-			return task_pgrp_vnr(current);
-		}
-	case 2: /* getsid */
-		{
-			int (*sys_getsid)(pid_t) = (int (*)(pid_t))SYS(getsid);
-			return sys_getsid(pid);
-		}
-	case 3: /* setsid */
-		{
-			int (*sys_setsid)(void) = (int (*)(void))SYS(setsid);
-			return sys_setsid();
-		}
-	case 4: /* getpgid */
-		{
-			int (*sys_getpgid)(pid_t) = (int (*)(pid_t))SYS(getpgid);
-			return sys_getpgid(pid);
-		}
-	case 5: /* setpgid */
-		{
-			int (*sys_setpgid)(pid_t,pid_t) = 
-				(int (*)(pid_t,pid_t))SYS(setpgid);
-			return sys_setpgid(pid,pgid);
-		}
-	}
-	return -EINVAL;
-}
-
-asmlinkage int solaris_gettimeofday(u32 tim)
-{
-	int (*sys_gettimeofday)(struct timeval *, struct timezone *) =
-		(int (*)(struct timeval *, struct timezone *))SYS(gettimeofday);
-		
-	return sys_gettimeofday((struct timeval *)(u64)tim, NULL);
-}
-
-#define RLIM_SOL_INFINITY32	0x7fffffff
-#define RLIM_SOL_SAVED_MAX32	0x7ffffffe
-#define RLIM_SOL_SAVED_CUR32	0x7ffffffd
-#define RLIM_SOL_INFINITY	((u64)-3)
-#define RLIM_SOL_SAVED_MAX	((u64)-2)
-#define RLIM_SOL_SAVED_CUR	((u64)-1)
-#define RESOURCE32(x) ((x > RLIM_INFINITY32) ? RLIM_INFINITY32 : x)
-#define RLIMIT_SOL_NOFILE	5
-#define RLIMIT_SOL_VMEM		6
-
-struct rlimit32 {
-	u32	rlim_cur;
-	u32	rlim_max;
-};
-
-asmlinkage int solaris_getrlimit(unsigned int resource, struct rlimit32 __user *rlim)
-{
-	struct rlimit r;
-	int ret;
-	mm_segment_t old_fs = get_fs ();
-	int (*sys_getrlimit)(unsigned int, struct rlimit *) =
-		(int (*)(unsigned int, struct rlimit *))SYS(getrlimit);
-
-	if (resource > RLIMIT_SOL_VMEM)
-		return -EINVAL;	
-	switch (resource) {
-	case RLIMIT_SOL_NOFILE: resource = RLIMIT_NOFILE; break;
-	case RLIMIT_SOL_VMEM: resource = RLIMIT_AS; break;
-	default: break;
-	}
-	set_fs (KERNEL_DS);
-	ret = sys_getrlimit(resource, &r);
-	set_fs (old_fs);
-	if (!ret) {
-		if (r.rlim_cur == RLIM_INFINITY)
-			r.rlim_cur = RLIM_SOL_INFINITY32;
-		else if ((u64)r.rlim_cur > RLIM_SOL_INFINITY32)
-			r.rlim_cur = RLIM_SOL_SAVED_CUR32;
-		if (r.rlim_max == RLIM_INFINITY)
-			r.rlim_max = RLIM_SOL_INFINITY32;
-		else if ((u64)r.rlim_max > RLIM_SOL_INFINITY32)
-			r.rlim_max = RLIM_SOL_SAVED_MAX32;
-		ret = put_user (r.rlim_cur, &rlim->rlim_cur);
-		ret |= __put_user (r.rlim_max, &rlim->rlim_max);
-	}
-	return ret;
-}
-
-asmlinkage int solaris_setrlimit(unsigned int resource, struct rlimit32 __user *rlim)
-{
-	struct rlimit r, rold;
-	int ret;
-	mm_segment_t old_fs = get_fs ();
-	int (*sys_getrlimit)(unsigned int, struct rlimit __user *) =
-		(int (*)(unsigned int, struct rlimit __user *))SYS(getrlimit);
-	int (*sys_setrlimit)(unsigned int, struct rlimit __user *) =
-		(int (*)(unsigned int, struct rlimit __user *))SYS(setrlimit);
-
-	if (resource > RLIMIT_SOL_VMEM)
-		return -EINVAL;	
-	switch (resource) {
-	case RLIMIT_SOL_NOFILE: resource = RLIMIT_NOFILE; break;
-	case RLIMIT_SOL_VMEM: resource = RLIMIT_AS; break;
-	default: break;
-	}
-	if (get_user (r.rlim_cur, &rlim->rlim_cur) ||
-	    __get_user (r.rlim_max, &rlim->rlim_max))
-		return -EFAULT;
-	set_fs (KERNEL_DS);
-	ret = sys_getrlimit(resource, &rold);
-	if (!ret) {
-		if (r.rlim_cur == RLIM_SOL_INFINITY32)
-			r.rlim_cur = RLIM_INFINITY;
-		else if (r.rlim_cur == RLIM_SOL_SAVED_CUR32)
-			r.rlim_cur = rold.rlim_cur;
-		else if (r.rlim_cur == RLIM_SOL_SAVED_MAX32)
-			r.rlim_cur = rold.rlim_max;
-		if (r.rlim_max == RLIM_SOL_INFINITY32)
-			r.rlim_max = RLIM_INFINITY;
-		else if (r.rlim_max == RLIM_SOL_SAVED_CUR32)
-			r.rlim_max = rold.rlim_cur;
-		else if (r.rlim_max == RLIM_SOL_SAVED_MAX32)
-			r.rlim_max = rold.rlim_max;
-		ret = sys_setrlimit(resource, &r);
-	}
-	set_fs (old_fs);
-	return ret;
-}
-
-asmlinkage int solaris_getrlimit64(unsigned int resource, struct rlimit __user *rlim)
-{
-	struct rlimit r;
-	int ret;
-	mm_segment_t old_fs = get_fs ();
-	int (*sys_getrlimit)(unsigned int, struct rlimit __user *) =
-		(int (*)(unsigned int, struct rlimit __user *))SYS(getrlimit);
-
-	if (resource > RLIMIT_SOL_VMEM)
-		return -EINVAL;	
-	switch (resource) {
-	case RLIMIT_SOL_NOFILE: resource = RLIMIT_NOFILE; break;
-	case RLIMIT_SOL_VMEM: resource = RLIMIT_AS; break;
-	default: break;
-	}
-	set_fs (KERNEL_DS);
-	ret = sys_getrlimit(resource, &r);
-	set_fs (old_fs);
-	if (!ret) {
-		if (r.rlim_cur == RLIM_INFINITY)
-			r.rlim_cur = RLIM_SOL_INFINITY;
-		if (r.rlim_max == RLIM_INFINITY)
-			r.rlim_max = RLIM_SOL_INFINITY;
-		ret = put_user (r.rlim_cur, &rlim->rlim_cur);
-		ret |= __put_user (r.rlim_max, &rlim->rlim_max);
-	}
-	return ret;
-}
-
-asmlinkage int solaris_setrlimit64(unsigned int resource, struct rlimit __user *rlim)
-{
-	struct rlimit r, rold;
-	int ret;
-	mm_segment_t old_fs = get_fs ();
-	int (*sys_getrlimit)(unsigned int, struct rlimit __user *) =
-		(int (*)(unsigned int, struct rlimit __user *))SYS(getrlimit);
-	int (*sys_setrlimit)(unsigned int, struct rlimit __user *) =
-		(int (*)(unsigned int, struct rlimit __user *))SYS(setrlimit);
-
-	if (resource > RLIMIT_SOL_VMEM)
-		return -EINVAL;	
-	switch (resource) {
-	case RLIMIT_SOL_NOFILE: resource = RLIMIT_NOFILE; break;
-	case RLIMIT_SOL_VMEM: resource = RLIMIT_AS; break;
-	default: break;
-	}
-	if (get_user (r.rlim_cur, &rlim->rlim_cur) ||
-	    __get_user (r.rlim_max, &rlim->rlim_max))
-		return -EFAULT;
-	set_fs (KERNEL_DS);
-	ret = sys_getrlimit(resource, &rold);
-	if (!ret) {
-		if (r.rlim_cur == RLIM_SOL_INFINITY)
-			r.rlim_cur = RLIM_INFINITY;
-		else if (r.rlim_cur == RLIM_SOL_SAVED_CUR)
-			r.rlim_cur = rold.rlim_cur;
-		else if (r.rlim_cur == RLIM_SOL_SAVED_MAX)
-			r.rlim_cur = rold.rlim_max;
-		if (r.rlim_max == RLIM_SOL_INFINITY)
-			r.rlim_max = RLIM_INFINITY;
-		else if (r.rlim_max == RLIM_SOL_SAVED_CUR)
-			r.rlim_max = rold.rlim_cur;
-		else if (r.rlim_max == RLIM_SOL_SAVED_MAX)
-			r.rlim_max = rold.rlim_max;
-		ret = sys_setrlimit(resource, &r);
-	}
-	set_fs (old_fs);
-	return ret;
-}
-
-struct sol_ntptimeval {
-	struct compat_timeval time;
-	s32 maxerror;
-	s32 esterror;
-};
-
-struct sol_timex {
-	u32 modes;
-	s32 offset;
-	s32 freq;
-	s32 maxerror;
-	s32 esterror;
-	s32 status;
-	s32 constant;
-	s32 precision;
-	s32 tolerance;
-	s32 ppsfreq;
-	s32 jitter;
-	s32 shift;
-	s32 stabil;
-	s32 jitcnt;
-	s32 calcnt;
-	s32 errcnt;
-	s32 stbcnt;
-};
-
-asmlinkage int solaris_ntp_gettime(struct sol_ntptimeval __user *ntp)
-{
-	int (*sys_adjtimex)(struct timex __user *) =
-		(int (*)(struct timex __user *))SYS(adjtimex);
-	struct timex t;
-	int ret;
-	mm_segment_t old_fs = get_fs();
-	
-	set_fs(KERNEL_DS);
-	t.modes = 0;
-	ret = sys_adjtimex(&t);
-	set_fs(old_fs);
-	if (ret < 0)
-		return ret;
-	ret = put_user (t.time.tv_sec, &ntp->time.tv_sec);
-	ret |= __put_user (t.time.tv_usec, &ntp->time.tv_usec);
-	ret |= __put_user (t.maxerror, &ntp->maxerror);
-	ret |= __put_user (t.esterror, &ntp->esterror);
-	return ret;	                        
-}
-
-asmlinkage int solaris_ntp_adjtime(struct sol_timex __user *txp)
-{
-	int (*sys_adjtimex)(struct timex __user *) =
-		(int (*)(struct timex __user *))SYS(adjtimex);
-	struct timex t;
-	int ret, err;
-	mm_segment_t old_fs = get_fs();
-
-	ret = get_user (t.modes, &txp->modes);
-	ret |= __get_user (t.offset, &txp->offset);
-	ret |= __get_user (t.freq, &txp->freq);
-	ret |= __get_user (t.maxerror, &txp->maxerror);
-	ret |= __get_user (t.esterror, &txp->esterror);
-	ret |= __get_user (t.status, &txp->status);
-	ret |= __get_user (t.constant, &txp->constant);
-	set_fs(KERNEL_DS);
-	ret = sys_adjtimex(&t);
-	set_fs(old_fs);
-	if (ret < 0)
-		return ret;
-	err = put_user (t.offset, &txp->offset);
-	err |= __put_user (t.freq, &txp->freq);
-	err |= __put_user (t.maxerror, &txp->maxerror);
-	err |= __put_user (t.esterror, &txp->esterror);
-	err |= __put_user (t.status, &txp->status);
-	err |= __put_user (t.constant, &txp->constant);
-	err |= __put_user (t.precision, &txp->precision);
-	err |= __put_user (t.tolerance, &txp->tolerance);
-	err |= __put_user (t.ppsfreq, &txp->ppsfreq);
-	err |= __put_user (t.jitter, &txp->jitter);
-	err |= __put_user (t.shift, &txp->shift);
-	err |= __put_user (t.stabil, &txp->stabil);
-	err |= __put_user (t.jitcnt, &txp->jitcnt);
-	err |= __put_user (t.calcnt, &txp->calcnt);
-	err |= __put_user (t.errcnt, &txp->errcnt);
-	err |= __put_user (t.stbcnt, &txp->stbcnt);
-	if (err)
-		return -EFAULT;
-	return ret;
-}
-
-asmlinkage int do_sol_unimplemented(struct pt_regs *regs)
-{
-	printk ("Unimplemented Solaris syscall %d %08x %08x %08x %08x\n", 
-			(int)regs->u_regs[UREG_G1], 
-			(int)regs->u_regs[UREG_I0],
-			(int)regs->u_regs[UREG_I1],
-			(int)regs->u_regs[UREG_I2],
-			(int)regs->u_regs[UREG_I3]);
-	return -ENOSYS;
-}
-
-asmlinkage void solaris_register(void)
-{
-	set_personality(PER_SVR4);
-}
-
-extern long solaris_to_linux_signals[], linux_to_solaris_signals[];
-
-struct exec_domain solaris_exec_domain = {
-	.name =		"Solaris",
-	.handler =	NULL,
-	.pers_low =	1,		/* PER_SVR4 personality */
-	.pers_high =	1,
-	.signal_map =	solaris_to_linux_signals,
-	.signal_invmap =linux_to_solaris_signals,
-	.module =	THIS_MODULE,
-	.next =		NULL
-};
-
-extern int init_socksys(void);
-
-MODULE_AUTHOR("Jakub Jelinek (jj@ultra.linux.cz), Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)");
-MODULE_DESCRIPTION("Solaris binary emulation module");
-MODULE_LICENSE("GPL");
-
-extern u32 tl0_solaris[8];
-#define update_ttable(x) 										\
-	tl0_solaris[3] = (((long)(x) - (long)tl0_solaris - 3) >> 2) | 0x40000000;			\
-	wmb();		\
-	__asm__ __volatile__ ("flush %0" : : "r" (&tl0_solaris[3]))
-
-extern u32 solaris_sparc_syscall[];
-extern u32 solaris_syscall[];
-extern void cleanup_socksys(void);
-
-extern u32 entry64_personality_patch;
-
-static int __init solaris_init(void)
-{
-	int ret;
-
-	SOLDD(("Solaris module at %p\n", solaris_sparc_syscall));
-	register_exec_domain(&solaris_exec_domain);
-	if ((ret = init_socksys())) {
-		unregister_exec_domain(&solaris_exec_domain);
-		return ret;
-	}
-	update_ttable(solaris_sparc_syscall);
-	entry64_personality_patch |=
-		(offsetof(struct task_struct, personality) +
-		 (sizeof(unsigned long) - 1));
-	wmb();
-	__asm__ __volatile__("flush %0"
-			     : : "r" (&entry64_personality_patch));
-	return 0;
-}
-
-static void __exit solaris_exit(void)
-{
-	update_ttable(solaris_syscall);
-	cleanup_socksys();
-	unregister_exec_domain(&solaris_exec_domain);
-}
-
-module_init(solaris_init);
-module_exit(solaris_exit);
diff --git a/arch/sparc64/solaris/signal.c b/arch/sparc64/solaris/signal.c
deleted file mode 100644
index de10c9716cfb..000000000000
--- a/arch/sparc64/solaris/signal.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/* $Id: signal.c,v 1.7 2000/09/05 21:44:54 davem Exp $
- * signal.c: Signal emulation for Solaris
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-
-#include <asm/uaccess.h>
-#include <asm/svr4.h>
-#include <asm/string.h>
-
-#include "conv.h"
-#include "signal.h"
-
-#define _S(nr) (1L<<((nr)-1))
-
-#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
-
-long linux_to_solaris_signals[] = {
-        0,
-	SOLARIS_SIGHUP,		SOLARIS_SIGINT,	
-	SOLARIS_SIGQUIT,	SOLARIS_SIGILL,
-	SOLARIS_SIGTRAP,	SOLARIS_SIGIOT,
-	SOLARIS_SIGEMT,		SOLARIS_SIGFPE,
-	SOLARIS_SIGKILL,	SOLARIS_SIGBUS,
-	SOLARIS_SIGSEGV,	SOLARIS_SIGSYS,
-	SOLARIS_SIGPIPE,	SOLARIS_SIGALRM,
-	SOLARIS_SIGTERM,	SOLARIS_SIGURG,
-	SOLARIS_SIGSTOP,	SOLARIS_SIGTSTP,
-	SOLARIS_SIGCONT,	SOLARIS_SIGCLD,
-	SOLARIS_SIGTTIN,	SOLARIS_SIGTTOU,
-	SOLARIS_SIGPOLL,	SOLARIS_SIGXCPU,
-	SOLARIS_SIGXFSZ,	SOLARIS_SIGVTALRM,
-	SOLARIS_SIGPROF,	SOLARIS_SIGWINCH,
-	SOLARIS_SIGUSR1,	SOLARIS_SIGUSR1,
-	SOLARIS_SIGUSR2,	-1,
-};
-
-long solaris_to_linux_signals[] = {
-        0,
-        SIGHUP,		SIGINT,		SIGQUIT,	SIGILL,
-        SIGTRAP,	SIGIOT,		SIGEMT,		SIGFPE,
-        SIGKILL,	SIGBUS,		SIGSEGV,	SIGSYS,
-        SIGPIPE,	SIGALRM,	SIGTERM,	SIGUSR1,
-        SIGUSR2,	SIGCHLD,	-1,		SIGWINCH,
-        SIGURG,		SIGPOLL,	SIGSTOP,	SIGTSTP,
-        SIGCONT,	SIGTTIN,	SIGTTOU,	SIGVTALRM,
-        SIGPROF,	SIGXCPU,	SIGXFSZ,        -1,
-	-1,		-1,		-1,		-1,
-	-1,		-1,		-1,		-1,
-	-1,		-1,		-1,		-1,
-};
-
-static inline long mapsig(long sig)
-{
-	if ((unsigned long)sig > SOLARIS_NSIGNALS)
-		return -EINVAL;
-	return solaris_to_linux_signals[sig];
-}
-
-asmlinkage int solaris_kill(int pid, int sig)
-{
-	int (*sys_kill)(int,int) = 
-		(int (*)(int,int))SYS(kill);
-	int s = mapsig(sig);
-	
-	if (s < 0) return s;
-	return sys_kill(pid, s);
-}
-
-static long sig_handler(int sig, u32 arg, int one_shot)
-{
-	struct sigaction sa, old;
-	int ret;
-	mm_segment_t old_fs = get_fs();
-	int (*sys_sigaction)(int,struct sigaction __user *,struct sigaction __user *) = 
-		(int (*)(int,struct sigaction __user *,struct sigaction __user *))SYS(sigaction);
-	
-	sigemptyset(&sa.sa_mask);
-	sa.sa_restorer = NULL;
-	sa.sa_handler = (__sighandler_t)A(arg);
-	sa.sa_flags = 0;
-	if (one_shot) sa.sa_flags = SA_ONESHOT | SA_NOMASK;
-	set_fs (KERNEL_DS);
-	ret = sys_sigaction(sig, (void __user *)&sa, (void __user *)&old);
-	set_fs (old_fs);
-	if (ret < 0) return ret;
-	return (u32)(unsigned long)old.sa_handler;
-}
-
-static inline long solaris_signal(int sig, u32 arg)
-{
-	return sig_handler (sig, arg, 1);
-}
-
-static long solaris_sigset(int sig, u32 arg)
-{
-	if (arg != 2) /* HOLD */ {
-		spin_lock_irq(&current->sighand->siglock);
-		sigdelsetmask(&current->blocked, _S(sig));
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-		return sig_handler (sig, arg, 0);
-	} else {
-		spin_lock_irq(&current->sighand->siglock);
-		sigaddsetmask(&current->blocked, (_S(sig) & ~_BLOCKABLE));
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-		return 0;
-	}
-}
-
-static inline long solaris_sighold(int sig)
-{
-	return solaris_sigset(sig, 2);
-}
-
-static inline long solaris_sigrelse(int sig)
-{
-	spin_lock_irq(&current->sighand->siglock);
-	sigdelsetmask(&current->blocked, _S(sig));
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	return 0;
-}
-
-static inline long solaris_sigignore(int sig)
-{
-	return sig_handler(sig, (u32)(unsigned long)SIG_IGN, 0);
-}
-
-static inline long solaris_sigpause(int sig)
-{
-	printk ("Need to support solaris sigpause\n");
-	return -ENOSYS;
-}
-
-asmlinkage long solaris_sigfunc(int sig, u32 arg)
-{
-	int func = sig & ~0xff;
-	
-	sig = mapsig(sig & 0xff); 
-	if (sig < 0) return sig; 
-	switch (func) {
-	case 0: return solaris_signal(sig, arg); 
-	case 0x100: return solaris_sigset(sig, arg); 
-	case 0x200: return solaris_sighold(sig);
-	case 0x400: return solaris_sigrelse(sig); 
-	case 0x800: return solaris_sigignore(sig); 
-	case 0x1000: return solaris_sigpause(sig);
-	}
-	return -EINVAL;
-}
-
-typedef struct {
-	u32 __sigbits[4];
-} sol_sigset_t;
-
-static inline int mapin(u32 *p, sigset_t *q)
-{
-	int i;
-	u32 x;
-	int sig;
-	
-	sigemptyset(q);
-	x = p[0];
-	for (i = 1; i <= SOLARIS_NSIGNALS; i++) {
-		if (x & 1) {
-			sig = solaris_to_linux_signals[i];
-			if (sig == -1)
-				return -EINVAL;
-			sigaddsetmask(q, (1L << (sig - 1)));
-		}
-		x >>= 1;
-		if (i == 32)
-			x = p[1];
-	}
-	return 0;
-}
-
-static inline int mapout(sigset_t *q, u32 *p)
-{
-	int i;
-	int sig;
-	
-	p[0] = 0;
-	p[1] = 0;
-	for (i = 1; i <= 32; i++) {
-		if (sigismember(q, sigmask(i))) {
-			sig = linux_to_solaris_signals[i];
-			if (sig == -1)
-				return -EINVAL;
-			if (sig > 32)
-				p[1] |= 1L << (sig - 33);
-			else
-				p[0] |= 1L << (sig - 1);
-		}
-	}
-	return 0;
-}
-
-asmlinkage int solaris_sigprocmask(int how, u32 in, u32 out)
-{
-	sigset_t in_s, *ins, out_s, *outs;
-	mm_segment_t old_fs = get_fs();
-	int ret;
-	int (*sys_sigprocmask)(int,sigset_t __user *,sigset_t __user *) = 
-		(int (*)(int,sigset_t __user *,sigset_t __user *))SYS(sigprocmask);
-	
-	ins = NULL; outs = NULL;
-	if (in) {
-		u32 tmp[2];
-		
-		if (copy_from_user (tmp, (void __user *)A(in), 2*sizeof(u32)))
-			return -EFAULT;
-		ins = &in_s;
-		if (mapin (tmp, ins)) return -EINVAL;
-	}
-	if (out) outs = &out_s;
-	set_fs (KERNEL_DS);
-	ret = sys_sigprocmask((how == 3) ? SIG_SETMASK : how,
-				(void __user *)ins, (void __user *)outs);
-	set_fs (old_fs);
-	if (ret) return ret;
-	if (out) {
-		u32 tmp[4];
-		
-		tmp[2] = 0; tmp[3] = 0;
-		if (mapout (outs, tmp)) return -EINVAL;
-		if (copy_to_user((void __user *)A(out), tmp, 4*sizeof(u32)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-asmlinkage long do_sol_sigsuspend(u32 mask)
-{
-	sigset_t s;
-	u32 tmp[2];
-		
-	if (copy_from_user (tmp, (sol_sigset_t __user *)A(mask), 2*sizeof(u32)))
-		return -EFAULT;
-	if (mapin (tmp, &s)) return -EINVAL;
-	return (long)s.sig[0];
-}
-
-struct sol_sigaction {
-	int	sa_flags;
-	u32	sa_handler;
-	u32	sa_mask[4];
-	int	sa_resv[2];
-};
-
-asmlinkage int solaris_sigaction(int sig, u32 act, u32 old)
-{
-	u32 tmp, tmp2[4];
-	struct sigaction s, s2;
-	int ret;
-	mm_segment_t old_fs = get_fs();
-	struct sol_sigaction __user *p = (void __user *)A(old);
-	int (*sys_sigaction)(int,struct sigaction __user *,struct sigaction __user *) = 
-		(int (*)(int,struct sigaction __user *,struct sigaction __user *))SYS(sigaction);
-	
-	sig = mapsig(sig); 
-	if (sig < 0) {
-		/* We cheat a little bit for Solaris only signals */
-		if (old && clear_user(p, sizeof(struct sol_sigaction)))
-			return -EFAULT;
-		return 0;
-	}
-	if (act) {
-		if (get_user (tmp, &p->sa_flags))
-			return -EFAULT;
-		s.sa_flags = 0;
-		if (tmp & SOLARIS_SA_ONSTACK) s.sa_flags |= SA_STACK;
-		if (tmp & SOLARIS_SA_RESTART) s.sa_flags |= SA_RESTART;
-		if (tmp & SOLARIS_SA_NODEFER) s.sa_flags |= SA_NOMASK;
-		if (tmp & SOLARIS_SA_RESETHAND) s.sa_flags |= SA_ONESHOT;
-		if (tmp & SOLARIS_SA_NOCLDSTOP) s.sa_flags |= SA_NOCLDSTOP;
-		if (get_user (tmp, &p->sa_handler) ||
-		    copy_from_user (tmp2, &p->sa_mask, 2*sizeof(u32)))
-			return -EFAULT;
-		s.sa_handler = (__sighandler_t)A(tmp);
-		if (mapin (tmp2, &s.sa_mask)) return -EINVAL;
-		s.sa_restorer = NULL;
-	}
-	set_fs(KERNEL_DS);
-	ret = sys_sigaction(sig, act ? (void __user *)&s : NULL,
-				 old ? (void __user *)&s2 : NULL);
-	set_fs(old_fs);
-	if (ret) return ret;
-	if (old) {
-		if (mapout (&s2.sa_mask, tmp2)) return -EINVAL;
-		tmp = 0; tmp2[2] = 0; tmp2[3] = 0;
-		if (s2.sa_flags & SA_STACK) tmp |= SOLARIS_SA_ONSTACK;
-		if (s2.sa_flags & SA_RESTART) tmp |= SOLARIS_SA_RESTART;
-		if (s2.sa_flags & SA_NOMASK) tmp |= SOLARIS_SA_NODEFER;
-		if (s2.sa_flags & SA_ONESHOT) tmp |= SOLARIS_SA_RESETHAND;
-		if (s2.sa_flags & SA_NOCLDSTOP) tmp |= SOLARIS_SA_NOCLDSTOP;
-		if (put_user (tmp, &p->sa_flags) ||
-		    __put_user ((u32)(unsigned long)s2.sa_handler, &p->sa_handler) ||
-		    copy_to_user (&p->sa_mask, tmp2, 4*sizeof(u32)))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-asmlinkage int solaris_sigpending(int which, u32 set)
-{
-	sigset_t s;
-	u32 tmp[4];
-	switch (which) {
-	case 1: /* sigpending */
-		spin_lock_irq(&current->sighand->siglock);
-		sigandsets(&s, &current->blocked, &current->pending.signal);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-		break;
-	case 2: /* sigfillset - I just set signals which have linux equivalents */
-		sigfillset(&s);
-		break;
-	default: return -EINVAL;
-	}
-	if (mapout (&s, tmp)) return -EINVAL;
-	tmp[2] = 0; tmp[3] = 0;
-	if (copy_to_user ((u32 __user *)A(set), tmp, sizeof(tmp)))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage int solaris_wait(u32 stat_loc)
-{
-	unsigned __user *p = (unsigned __user *)A(stat_loc);
-	int (*sys_wait4)(pid_t,unsigned __user *, int, struct rusage __user *) =
-		(int (*)(pid_t,unsigned __user *, int, struct rusage __user *))SYS(wait4);
-	int ret, status;
-	
-	ret = sys_wait4(-1, p, WUNTRACED, NULL);
-	if (ret >= 0 && stat_loc) {
-		if (get_user (status, p))
-			return -EFAULT;
-		if (((status - 1) & 0xffff) < 0xff)
-			status = linux_to_solaris_signals[status & 0x7f] & 0x7f;
-		else if ((status & 0xff) == 0x7f)
-			status = (linux_to_solaris_signals[(status >> 8) & 0xff] << 8) | 0x7f;
-		if (__put_user (status, p))
-			return -EFAULT;
-	}
-	return ret;
-}
-
-asmlinkage int solaris_waitid(int idtype, s32 pid, u32 info, int options)
-{
-	int (*sys_wait4)(pid_t,unsigned __user *, int, struct rusage __user *) =
-		(int (*)(pid_t,unsigned __user *, int, struct rusage __user *))SYS(wait4);
-	int opts, status, ret;
-	
-	switch (idtype) {
-	case 0: /* P_PID */ break;
-	case 1: /* P_PGID */ pid = -pid; break;
-	case 7: /* P_ALL */ pid = -1; break;
-	default: return -EINVAL;
-	}
-	opts = 0;
-	if (options & SOLARIS_WUNTRACED) opts |= WUNTRACED;
-	if (options & SOLARIS_WNOHANG) opts |= WNOHANG;
-	current->state = TASK_RUNNING;
-	ret = sys_wait4(pid, (unsigned int __user *)A(info), opts, NULL);
-	if (ret < 0) return ret;
-	if (info) {
-		struct sol_siginfo __user *s = (void __user *)A(info);
-	
-		if (get_user (status, (unsigned int __user *)A(info)))
-			return -EFAULT;
-
-		if (__put_user (SOLARIS_SIGCLD, &s->si_signo) ||
-		    __put_user (ret, &s->_data._proc._pid))
-			return -EFAULT;
-
-		switch (status & 0xff) {
-		case 0: ret = SOLARIS_CLD_EXITED;
-			status = (status >> 8) & 0xff;
-			break;
-		case 0x7f:
-			status = (status >> 8) & 0xff;
-			switch (status) {
-			case SIGSTOP:
-			case SIGTSTP: ret = SOLARIS_CLD_STOPPED;
-			default: ret = SOLARIS_CLD_EXITED;
-			}
-			status = linux_to_solaris_signals[status];
-			break;
-		default:
-			if (status & 0x80) ret = SOLARIS_CLD_DUMPED;
-			else ret = SOLARIS_CLD_KILLED;
-			status = linux_to_solaris_signals[status & 0x7f];
-			break;
-		}
-
-		if (__put_user (ret, &s->si_code) ||
-		    __put_user (status, &s->_data._proc._pdata._cld._status))
-			return -EFAULT;
-	}
-	return 0;
-}
-
-extern int svr4_setcontext(svr4_ucontext_t *c, struct pt_regs *regs);
-extern int svr4_getcontext(svr4_ucontext_t *c, struct pt_regs *regs);
-
-asmlinkage int solaris_context(struct pt_regs *regs)
-{
-	switch ((unsigned)regs->u_regs[UREG_I0]) {
-	case 0: /* getcontext */
-		return svr4_getcontext((svr4_ucontext_t *)(long)(u32)regs->u_regs[UREG_I1], regs);
-	case 1: /* setcontext */
-		return svr4_setcontext((svr4_ucontext_t *)(long)(u32)regs->u_regs[UREG_I1], regs);
-	default:
-		return -EINVAL;
-
-	}
-}
-
-asmlinkage int solaris_sigaltstack(u32 ss, u32 oss)
-{
-/* XXX Implement this soon */
-	return 0;
-}
diff --git a/arch/sparc64/solaris/signal.h b/arch/sparc64/solaris/signal.h
deleted file mode 100644
index e91570803050..000000000000
--- a/arch/sparc64/solaris/signal.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/* $Id: signal.h,v 1.3 1998/04/12 06:20:33 davem Exp $
- * signal.h: Signal emulation for Solaris
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-    
-#define SOLARIS_SIGHUP		1
-#define SOLARIS_SIGINT		2
-#define SOLARIS_SIGQUIT		3
-#define SOLARIS_SIGILL		4
-#define SOLARIS_SIGTRAP		5
-#define SOLARIS_SIGIOT		6
-#define SOLARIS_SIGEMT		7
-#define SOLARIS_SIGFPE		8
-#define SOLARIS_SIGKILL		9
-#define SOLARIS_SIGBUS		10
-#define SOLARIS_SIGSEGV		11
-#define SOLARIS_SIGSYS		12
-#define SOLARIS_SIGPIPE		13
-#define SOLARIS_SIGALRM		14
-#define SOLARIS_SIGTERM		15
-#define SOLARIS_SIGUSR1		16
-#define SOLARIS_SIGUSR2		17
-#define SOLARIS_SIGCLD		18
-#define SOLARIS_SIGPWR		19
-#define SOLARIS_SIGWINCH	20
-#define SOLARIS_SIGURG		21
-#define SOLARIS_SIGPOLL		22
-#define SOLARIS_SIGSTOP		23
-#define SOLARIS_SIGTSTP		24
-#define SOLARIS_SIGCONT		25
-#define SOLARIS_SIGTTIN		26
-#define SOLARIS_SIGTTOU		27
-#define SOLARIS_SIGVTALRM	28
-#define SOLARIS_SIGPROF		29
-#define SOLARIS_SIGXCPU		30
-#define SOLARIS_SIGXFSZ		31
-#define SOLARIS_SIGWAITING	32
-#define SOLARIS_SIGLWP		33
-#define SOLARIS_SIGFREEZE	34
-#define SOLARIS_SIGTHAW		35
-#define SOLARIS_SIGCANCEL	36
-#define SOLARIS_SIGRTMIN	37
-#define SOLARIS_SIGRTMAX	44
-#define SOLARIS_NSIGNALS	44
-
-
-#define SOLARIS_SA_ONSTACK	1
-#define SOLARIS_SA_RESETHAND	2
-#define SOLARIS_SA_RESTART	4
-#define SOLARIS_SA_SIGINFO	8
-#define SOLARIS_SA_NODEFER	16
-#define SOLARIS_SA_NOCLDWAIT	0x10000
-#define SOLARIS_SA_NOCLDSTOP	0x20000
-
-struct sol_siginfo {
-	int	si_signo;
-	int	si_code;
-	int	si_errno;
-	union	{
-		char	pad[128-3*sizeof(int)];
-		struct { 
-			s32	_pid;
-			union {
-				struct {
-					s32	_uid;
-					s32	_value;
-				} _kill;
-				struct {
-					s32	_utime;
-					int	_status;
-					s32	_stime;
-				} _cld;
-			} _pdata;
-		} _proc;
-		struct { /* SIGSEGV, SIGBUS, SIGILL and SIGFPE */
-			u32	_addr;
-			int	_trapno;
-		} _fault;
-		struct { /* SIGPOLL, SIGXFSZ */
-			int	_fd;
-			s32	_band;
-		} _file;
-	} _data;
-};
-
-#define SOLARIS_WUNTRACED	0x04
-#define SOLARIS_WNOHANG		0x40
-#define SOLARIS_WEXITED         0x01
-#define SOLARIS_WTRAPPED        0x02
-#define SOLARIS_WSTOPPED        WUNTRACED
-#define SOLARIS_WCONTINUED      0x08
-#define SOLARIS_WNOWAIT         0x80
-
-#define SOLARIS_TRAP_BRKPT      1
-#define SOLARIS_TRAP_TRACE      2
-#define SOLARIS_CLD_EXITED      1
-#define SOLARIS_CLD_KILLED      2
-#define SOLARIS_CLD_DUMPED      3
-#define SOLARIS_CLD_TRAPPED     4
-#define SOLARIS_CLD_STOPPED     5
-#define SOLARIS_CLD_CONTINUED   6
-#define SOLARIS_POLL_IN         1
-#define SOLARIS_POLL_OUT        2
-#define SOLARIS_POLL_MSG        3
-#define SOLARIS_POLL_ERR        4
-#define SOLARIS_POLL_PRI        5
-#define SOLARIS_POLL_HUP        6
diff --git a/arch/sparc64/solaris/socket.c b/arch/sparc64/solaris/socket.c
deleted file mode 100644
index cc69847cf240..000000000000
--- a/arch/sparc64/solaris/socket.c
+++ /dev/null
@@ -1,461 +0,0 @@
-/* $Id: socket.c,v 1.6 2002/02/08 03:57:14 davem Exp $
- * socket.c: Socket syscall emulation for Solaris 2.6+
- *
- * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
- *
- * 1999-08-19 Fixed socketpair code 
- *            Jason Rappleye (rappleye@ccr.buffalo.edu)
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/socket.h>
-#include <linux/file.h>
-#include <linux/net.h>
-#include <linux/compat.h>
-#include <net/compat.h>
-#include <net/sock.h>
-
-#include <asm/uaccess.h>
-#include <asm/string.h>
-#include <asm/oplib.h>
-#include <asm/idprom.h>
-
-#include "conv.h"
-
-#define SOCK_SOL_STREAM		2
-#define SOCK_SOL_DGRAM		1
-#define SOCK_SOL_RAW		4
-#define SOCK_SOL_RDM		5
-#define SOCK_SOL_SEQPACKET	6
-
-#define SOL_SO_SNDLOWAT		0x1003
-#define SOL_SO_RCVLOWAT		0x1004
-#define SOL_SO_SNDTIMEO		0x1005
-#define SOL_SO_RCVTIMEO		0x1006
-#define SOL_SO_STATE		0x2000
-
-#define SOL_SS_NDELAY		0x040
-#define SOL_SS_NONBLOCK		0x080
-#define SOL_SS_ASYNC		0x100
-
-#define SO_STATE		0x000e
-
-static int socket_check(int family, int type)
-{
-	if (family != PF_UNIX && family != PF_INET)
-		return -ESOCKTNOSUPPORT;
-	switch (type) {
-	case SOCK_SOL_STREAM: type = SOCK_STREAM; break;
-	case SOCK_SOL_DGRAM: type = SOCK_DGRAM; break;
-	case SOCK_SOL_RAW: type = SOCK_RAW; break;
-	case SOCK_SOL_RDM: type = SOCK_RDM; break;
-	case SOCK_SOL_SEQPACKET: type = SOCK_SEQPACKET; break;
-	default: return -EINVAL;
-	}
-	return type;
-}
-
-static int solaris_to_linux_sockopt(int optname) 
-{
-	switch (optname) {
-	case SOL_SO_SNDLOWAT: optname = SO_SNDLOWAT; break;
-	case SOL_SO_RCVLOWAT: optname = SO_RCVLOWAT; break;
-	case SOL_SO_SNDTIMEO: optname = SO_SNDTIMEO; break;
-	case SOL_SO_RCVTIMEO: optname = SO_RCVTIMEO; break;
-	case SOL_SO_STATE: optname = SO_STATE; break;
-	};
-	
-	return optname;
-}
-	
-asmlinkage int solaris_socket(int family, int type, int protocol)
-{
-	int (*sys_socket)(int, int, int) =
-		(int (*)(int, int, int))SYS(socket);
-
-	type = socket_check (family, type);
-	if (type < 0) return type;
-	return sys_socket(family, type, protocol);
-}
-
-asmlinkage int solaris_socketpair(int *usockvec)
-{
-	int (*sys_socketpair)(int, int, int, int *) =
-		(int (*)(int, int, int, int *))SYS(socketpair);
-
-	/* solaris socketpair really only takes one arg at the syscall
-	 * level, int * usockvec. The libs apparently take care of 
-	 * making sure that family==AF_UNIX and type==SOCK_STREAM. The 
-	 * pointer we really want ends up residing in the first (and
-	 * supposedly only) argument.
-	 */
-
-	return sys_socketpair(AF_UNIX, SOCK_STREAM, 0, (int *)usockvec);
-}
-
-asmlinkage int solaris_bind(int fd, struct sockaddr *addr, int addrlen)
-{
-	int (*sys_bind)(int, struct sockaddr *, int) =
-		(int (*)(int, struct sockaddr *, int))SUNOS(104);
-
-	return sys_bind(fd, addr, addrlen);
-}
-
-asmlinkage int solaris_setsockopt(int fd, int level, int optname, u32 optval, int optlen)
-{
-	int (*sunos_setsockopt)(int, int, int, u32, int) =
-		(int (*)(int, int, int, u32, int))SUNOS(105);
-
-	optname = solaris_to_linux_sockopt(optname);
-	if (optname < 0)
-		return optname;
-	if (optname == SO_STATE)
-		return 0;
-
-	return sunos_setsockopt(fd, level, optname, optval, optlen);
-}
-
-asmlinkage int solaris_getsockopt(int fd, int level, int optname, u32 optval, u32 optlen)
-{
-	int (*sunos_getsockopt)(int, int, int, u32, u32) =
-		(int (*)(int, int, int, u32, u32))SUNOS(118);
-
-	optname = solaris_to_linux_sockopt(optname);
-	if (optname < 0)
-		return optname;
-
-	if (optname == SO_STATE)
-		optname = SOL_SO_STATE;
-
-	return sunos_getsockopt(fd, level, optname, optval, optlen);
-}
-
-asmlinkage int solaris_connect(int fd, struct sockaddr __user *addr, int addrlen)
-{
-	int (*sys_connect)(int, struct sockaddr __user *, int) =
-		(int (*)(int, struct sockaddr __user *, int))SYS(connect);
-
-	return sys_connect(fd, addr, addrlen);
-}
-
-asmlinkage int solaris_accept(int fd, struct sockaddr __user *addr, int __user *addrlen)
-{
-	int (*sys_accept)(int, struct sockaddr __user *, int __user *) =
-		(int (*)(int, struct sockaddr __user *, int __user *))SYS(accept);
-
-	return sys_accept(fd, addr, addrlen);
-}
-
-asmlinkage int solaris_listen(int fd, int backlog)
-{
-	int (*sys_listen)(int, int) =
-		(int (*)(int, int))SUNOS(106);
-
-	return sys_listen(fd, backlog);
-}
-
-asmlinkage int solaris_shutdown(int fd, int how)
-{
-	int (*sys_shutdown)(int, int) =
-		(int (*)(int, int))SYS(shutdown);
-
-	return sys_shutdown(fd, how);
-}
-
-#define MSG_SOL_OOB		0x1
-#define MSG_SOL_PEEK		0x2
-#define MSG_SOL_DONTROUTE	0x4
-#define MSG_SOL_EOR		0x8
-#define MSG_SOL_CTRUNC		0x10
-#define MSG_SOL_TRUNC		0x20
-#define MSG_SOL_WAITALL		0x40
-#define MSG_SOL_DONTWAIT	0x80
-
-static int solaris_to_linux_msgflags(int flags)
-{
-	int fl = flags & (MSG_OOB|MSG_PEEK|MSG_DONTROUTE);
-	
-	if (flags & MSG_SOL_EOR) fl |= MSG_EOR;
-	if (flags & MSG_SOL_CTRUNC) fl |= MSG_CTRUNC;
-	if (flags & MSG_SOL_TRUNC) fl |= MSG_TRUNC;
-	if (flags & MSG_SOL_WAITALL) fl |= MSG_WAITALL;
-	if (flags & MSG_SOL_DONTWAIT) fl |= MSG_DONTWAIT;
-	return fl;
-}
-
-static int linux_to_solaris_msgflags(int flags)
-{
-	int fl = flags & (MSG_OOB|MSG_PEEK|MSG_DONTROUTE);
-	
-	if (flags & MSG_EOR) fl |= MSG_SOL_EOR;
-	if (flags & MSG_CTRUNC) fl |= MSG_SOL_CTRUNC;
-	if (flags & MSG_TRUNC) fl |= MSG_SOL_TRUNC;
-	if (flags & MSG_WAITALL) fl |= MSG_SOL_WAITALL;
-	if (flags & MSG_DONTWAIT) fl |= MSG_SOL_DONTWAIT;
-	return fl;
-}
-
-asmlinkage int solaris_recvfrom(int s, char __user *buf, int len, int flags, u32 from, u32 fromlen)
-{
-	int (*sys_recvfrom)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *) =
-		(int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *))SYS(recvfrom);
-	
-	return sys_recvfrom(s, buf, len, solaris_to_linux_msgflags(flags), A(from), A(fromlen));
-}
-
-asmlinkage int solaris_recv(int s, char __user *buf, int len, int flags)
-{
-	int (*sys_recvfrom)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *) =
-		(int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *))SYS(recvfrom);
-	
-	return sys_recvfrom(s, buf, len, solaris_to_linux_msgflags(flags), NULL, NULL);
-}
-
-asmlinkage int solaris_sendto(int s, char __user *buf, int len, int flags, u32 to, u32 tolen)
-{
-	int (*sys_sendto)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *) =
-		(int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *))SYS(sendto);
-	
-	return sys_sendto(s, buf, len, solaris_to_linux_msgflags(flags), A(to), A(tolen));
-}
-
-asmlinkage int solaris_send(int s, char *buf, int len, int flags)
-{
-	int (*sys_sendto)(int, void *, size_t, unsigned, struct sockaddr *, int *) =
-		(int (*)(int, void *, size_t, unsigned, struct sockaddr *, int *))SYS(sendto);
-	
-	return sys_sendto(s, buf, len, solaris_to_linux_msgflags(flags), NULL, NULL);
-}
-
-asmlinkage int solaris_getpeername(int fd, struct sockaddr *addr, int *addrlen)
-{
-	int (*sys_getpeername)(int, struct sockaddr *, int *) =
-		(int (*)(int, struct sockaddr *, int *))SYS(getpeername);
-
-	return sys_getpeername(fd, addr, addrlen);
-}
-
-asmlinkage int solaris_getsockname(int fd, struct sockaddr *addr, int *addrlen)
-{
-	int (*sys_getsockname)(int, struct sockaddr *, int *) =
-		(int (*)(int, struct sockaddr *, int *))SYS(getsockname);
-
-	return sys_getsockname(fd, addr, addrlen);
-}
-
-/* XXX This really belongs in some header file... -DaveM */
-#define MAX_SOCK_ADDR	128		/* 108 for Unix domain - 
-					   16 for IP, 16 for IPX,
-					   24 for IPv6,
-					   about 80 for AX.25 */
-
-struct sol_nmsghdr {
-	u32		msg_name;
-	int		msg_namelen;
-	u32		msg_iov;
-	u32		msg_iovlen;
-	u32		msg_control;
-	u32		msg_controllen;
-	u32		msg_flags;
-};
-
-struct sol_cmsghdr {
-	u32		cmsg_len;
-	int		cmsg_level;
-	int		cmsg_type;
-	unsigned char	cmsg_data[0];
-};
-
-static inline int msghdr_from_user32_to_kern(struct msghdr *kmsg,
-					     struct sol_nmsghdr __user *umsg)
-{
-	u32 tmp1, tmp2, tmp3;
-	int err;
-
-	err = get_user(tmp1, &umsg->msg_name);
-	err |= __get_user(tmp2, &umsg->msg_iov);
-	err |= __get_user(tmp3, &umsg->msg_control);
-	if (err)
-		return -EFAULT;
-
-	kmsg->msg_name = A(tmp1);
-	kmsg->msg_iov = A(tmp2);
-	kmsg->msg_control = A(tmp3);
-
-	err = get_user(kmsg->msg_namelen, &umsg->msg_namelen);
-	err |= get_user(kmsg->msg_controllen, &umsg->msg_controllen);
-	err |= get_user(kmsg->msg_flags, &umsg->msg_flags);
-	
-	kmsg->msg_flags = solaris_to_linux_msgflags(kmsg->msg_flags);
-	
-	return err;
-}
-
-asmlinkage int solaris_sendmsg(int fd, struct sol_nmsghdr __user *user_msg, unsigned user_flags)
-{
-	struct socket *sock;
-	char address[MAX_SOCK_ADDR];
-	struct iovec iovstack[UIO_FASTIOV], *iov = iovstack;
-	unsigned char ctl[sizeof(struct cmsghdr) + 20];
-	unsigned char *ctl_buf = ctl;
-	struct msghdr msg_sys;
-	int err, ctl_len, iov_size, total_len;
-
-	err = -EFAULT;
-	if (msghdr_from_user32_to_kern(&msg_sys, user_msg))
-		goto out;
-
-	sock = sockfd_lookup(fd, &err);
-	if (!sock)
-		goto out;
-
-	/* do not move before msg_sys is valid */
-	err = -EMSGSIZE;
-	if (msg_sys.msg_iovlen > UIO_MAXIOV)
-		goto out_put;
-
-	/* Check whether to allocate the iovec area*/
-	err = -ENOMEM;
-	iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
-	if (msg_sys.msg_iovlen > UIO_FASTIOV) {
-		iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
-		if (!iov)
-			goto out_put;
-	}
-
-	err = verify_compat_iovec(&msg_sys, iov, address, VERIFY_READ);
-	if (err < 0)
-		goto out_freeiov;
-	total_len = err;
-
-	err = -ENOBUFS;
-	if (msg_sys.msg_controllen > INT_MAX)
-		goto out_freeiov;
-
-	ctl_len = msg_sys.msg_controllen;
-	if (ctl_len) {
-		struct sol_cmsghdr __user *ucmsg = msg_sys.msg_control;
-		unsigned long *kcmsg;
-		compat_size_t cmlen;
-
-		err = -EINVAL;
-		if (ctl_len <= sizeof(compat_size_t))
-			goto out_freeiov;
-
-		if (ctl_len > sizeof(ctl)) {
-			err = -ENOBUFS;
-			ctl_buf = kmalloc(ctl_len, GFP_KERNEL);
-			if (!ctl_buf)
-				goto out_freeiov;
-		}
-		__get_user(cmlen, &ucmsg->cmsg_len);
-		kcmsg = (unsigned long *) ctl_buf;
-		*kcmsg++ = (unsigned long)cmlen;
-		err = -EFAULT;
-		if (copy_from_user(kcmsg, &ucmsg->cmsg_level,
-				   ctl_len - sizeof(compat_size_t)))
-			goto out_freectl;
-		msg_sys.msg_control = ctl_buf;
-	}
-	msg_sys.msg_flags = solaris_to_linux_msgflags(user_flags);
-
-	if (sock->file->f_flags & O_NONBLOCK)
-		msg_sys.msg_flags |= MSG_DONTWAIT;
-	err = sock_sendmsg(sock, &msg_sys, total_len);
-
-out_freectl:
-	if (ctl_buf != ctl)    
-		sock_kfree_s(sock->sk, ctl_buf, ctl_len);
-out_freeiov:
-	if (iov != iovstack)
-		sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
-	sockfd_put(sock);
-out:       
-	return err;
-}
-
-asmlinkage int solaris_recvmsg(int fd, struct sol_nmsghdr __user *user_msg, unsigned int user_flags)
-{
-	struct socket *sock;
-	struct iovec iovstack[UIO_FASTIOV];
-	struct iovec *iov = iovstack;
-	struct msghdr msg_sys;
-	unsigned long cmsg_ptr;
-	int err, iov_size, total_len, len;
-
-	/* kernel mode address */
-	char addr[MAX_SOCK_ADDR];
-
-	/* user mode address pointers */
-	struct sockaddr __user *uaddr;
-	int __user *uaddr_len;
-
-	if (msghdr_from_user32_to_kern(&msg_sys, user_msg))
-		return -EFAULT;
-
-	sock = sockfd_lookup(fd, &err);
-	if (!sock)
-		goto out;
-
-	err = -EMSGSIZE;
-	if (msg_sys.msg_iovlen > UIO_MAXIOV)
-		goto out_put;
-
-	/* Check whether to allocate the iovec area*/
-	err = -ENOMEM;
-	iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
-	if (msg_sys.msg_iovlen > UIO_FASTIOV) {
-		iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
-		if (!iov)
-			goto out_put;
-	}
-
-	/*
-	 *	Save the user-mode address (verify_iovec will change the
-	 *	kernel msghdr to use the kernel address space)
-	 */
-	 
-	uaddr = (void __user *) msg_sys.msg_name;
-	uaddr_len = &user_msg->msg_namelen;
-	err = verify_compat_iovec(&msg_sys, iov, addr, VERIFY_WRITE);
-	if (err < 0)
-		goto out_freeiov;
-	total_len = err;
-
-	cmsg_ptr = (unsigned long) msg_sys.msg_control;
-	msg_sys.msg_flags = MSG_CMSG_COMPAT;
-
-	if (sock->file->f_flags & O_NONBLOCK)
-		user_flags |= MSG_DONTWAIT;
-
-	err = sock_recvmsg(sock, &msg_sys, total_len, user_flags);
-	if(err < 0)
-		goto out_freeiov;
-
-	len = err;
-
-	if (uaddr != NULL) {
-		err = move_addr_to_user(addr, msg_sys.msg_namelen, uaddr, uaddr_len);
-		if (err < 0)
-			goto out_freeiov;
-	}
-	err = __put_user(linux_to_solaris_msgflags(msg_sys.msg_flags), &user_msg->msg_flags);
-	if (err)
-		goto out_freeiov;
-	err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
-			 &user_msg->msg_controllen);
-	if (err)
-		goto out_freeiov;
-	err = len;
-
-out_freeiov:
-	if (iov != iovstack)
-		sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
-	sockfd_put(sock);
-out:
-	return err;
-}
diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c
deleted file mode 100644
index 7736411f244f..000000000000
--- a/arch/sparc64/solaris/socksys.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/* $Id: socksys.c,v 1.21 2002/02/08 03:57:14 davem Exp $
- * socksys.c: /dev/inet/ stuff for Solaris emulation.
- *
- * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1997, 1998 Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
- * Copyright (C) 1995, 1996 Mike Jagdis (jaggy@purplet.demon.co.uk)
- */
-
-/*
- *  Dave, _please_ give me specifications on this fscking mess so that I
- * could at least get it into the state when it wouldn't screw the rest of
- * the kernel over.  socksys.c and timod.c _stink_ and we are not talking
- * H2S here, it's isopropilmercaptan in concentrations way over LD50. -- AV
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/ioctl.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/init.h>
-#include <linux/poll.h>
-#include <linux/slab.h>
-#include <linux/syscalls.h>
-#include <linux/in.h>
-
-#include <net/sock.h>
-
-#include <asm/uaccess.h>
-#include <asm/termios.h>
-
-#include "conv.h"
-#include "socksys.h"
-
-static int af_inet_protocols[] = {
-IPPROTO_ICMP, IPPROTO_ICMP, IPPROTO_IGMP, IPPROTO_IPIP, IPPROTO_TCP,
-IPPROTO_EGP, IPPROTO_PUP, IPPROTO_UDP, IPPROTO_IDP, IPPROTO_RAW,
-0, 0, 0, 0, 0, 0,
-};
-
-#ifndef DEBUG_SOLARIS_KMALLOC
-
-#define mykmalloc kmalloc
-#define mykfree kfree
-
-#else
-
-extern void * mykmalloc(size_t s, gfp_t gfp);
-extern void mykfree(void *);
-
-#endif
-
-static unsigned int (*sock_poll)(struct file *, poll_table *);
-
-static struct file_operations socksys_file_ops = {
-	/* Currently empty */
-};
-
-static int socksys_open(struct inode * inode, struct file * filp)
-{
-	int family, type, protocol, fd;
-	struct dentry *dentry;
-	int (*sys_socket)(int,int,int) =
-		(int (*)(int,int,int))SUNOS(97);
-        struct sol_socket_struct * sock;
-	
-	family = ((iminor(inode) >> 4) & 0xf);
-	switch (family) {
-	case AF_UNIX:
-		type = SOCK_STREAM;
-		protocol = 0;
-		break;
-	case AF_INET:
-		protocol = af_inet_protocols[iminor(inode) & 0xf];
-		switch (protocol) {
-		case IPPROTO_TCP: type = SOCK_STREAM; break;
-		case IPPROTO_UDP: type = SOCK_DGRAM; break;
-		default: type = SOCK_RAW; break;
-		}
-		break;
-	default:
-		type = SOCK_RAW;
-		protocol = 0;
-		break;
-	}
-
-	fd = sys_socket(family, type, protocol);
-	if (fd < 0)
-		return fd;
-	/*
-	 * N.B. The following operations are not legal!
-	 *
-	 * No shit.  WTF is it supposed to do, anyway?
-	 *
-	 * Try instead:
-	 * d_delete(filp->f_path.dentry), then d_instantiate with sock inode
-	 */
-	dentry = filp->f_path.dentry;
-	filp->f_path.dentry = dget(fcheck(fd)->f_path.dentry);
-	filp->f_path.dentry->d_inode->i_rdev = inode->i_rdev;
-	filp->f_path.dentry->d_inode->i_flock = inode->i_flock;
-	SOCKET_I(filp->f_path.dentry->d_inode)->file = filp;
-	filp->f_op = &socksys_file_ops;
-        sock = (struct sol_socket_struct*) 
-        	mykmalloc(sizeof(struct sol_socket_struct), GFP_KERNEL);
-        if (!sock) return -ENOMEM;
-	SOLDD(("sock=%016lx(%016lx)\n", sock, filp));
-        sock->magic = SOLARIS_SOCKET_MAGIC;
-        sock->modcount = 0;
-        sock->state = TS_UNBND;
-        sock->offset = 0;
-        sock->pfirst = sock->plast = NULL;
-        filp->private_data = sock;
-	SOLDD(("filp->private_data %016lx\n", filp->private_data));
-
-	sys_close(fd);
-	dput(dentry);
-	return 0;
-}
-
-static int socksys_release(struct inode * inode, struct file * filp)
-{
-        struct sol_socket_struct * sock;
-        struct T_primsg *it;
-
-	/* XXX: check this */
-	sock = (struct sol_socket_struct *)filp->private_data;
-	SOLDD(("sock release %016lx(%016lx)\n", sock, filp));
-	it = sock->pfirst;
-	while (it) {
-		struct T_primsg *next = it->next;
-		
-		SOLDD(("socksys_release %016lx->%016lx\n", it, next));
-		mykfree((char*)it);
-		it = next;
-	}
-	filp->private_data = NULL;
-	SOLDD(("socksys_release %016lx\n", sock));
-	mykfree((char*)sock);
-	return 0;
-}
-
-static unsigned int socksys_poll(struct file * filp, poll_table * wait)
-{
-	struct inode *ino;
-	unsigned int mask = 0;
-
-	ino=filp->f_path.dentry->d_inode;
-	if (ino && S_ISSOCK(ino->i_mode)) {
-		struct sol_socket_struct *sock;
-		sock = (struct sol_socket_struct*)filp->private_data;
-		if (sock && sock->pfirst) {
-			mask |= POLLIN | POLLRDNORM;
-			if (sock->pfirst->pri == MSG_HIPRI)
-				mask |= POLLPRI;
-		}
-	}
-	if (sock_poll)
-		mask |= (*sock_poll)(filp, wait);
-	return mask;
-}
-	
-static const struct file_operations socksys_fops = {
-	.open =		socksys_open,
-	.release =	socksys_release,
-};
-
-int __init init_socksys(void)
-{
-	int ret;
-	struct file * file;
-	int (*sys_socket)(int,int,int) =
-		(int (*)(int,int,int))SUNOS(97);
-	int (*sys_close)(unsigned int) = 
-		(int (*)(unsigned int))SYS(close);
-	
-	ret = register_chrdev (30, "socksys", &socksys_fops);
-	if (ret < 0) {
-		printk ("Couldn't register socksys character device\n");
-		return ret;
-	}
-	ret = sys_socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
-	if (ret < 0) {
-		printk ("Couldn't create socket\n");
-		return ret;
-	}
-
-	file = fcheck(ret);
-	/* N.B. Is this valid? Suppose the f_ops are in a module ... */
-	socksys_file_ops = *file->f_op;
-	sys_close(ret);
-	sock_poll = socksys_file_ops.poll;
-	socksys_file_ops.poll = socksys_poll;
-	socksys_file_ops.release = socksys_release;
-	return 0;
-}
-
-void __exit cleanup_socksys(void)
-{
-	unregister_chrdev(30, "socksys");
-}
diff --git a/arch/sparc64/solaris/socksys.h b/arch/sparc64/solaris/socksys.h
deleted file mode 100644
index 5d1b78ec1600..000000000000
--- a/arch/sparc64/solaris/socksys.h
+++ /dev/null
@@ -1,208 +0,0 @@
-/* $Id: socksys.h,v 1.2 1998/03/26 08:46:07 jj Exp $
- * socksys.h: Definitions for STREAMS modules emulation code.
- *
- * Copyright (C) 1998 Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
- */
-
-#define MSG_HIPRI	0x01
-#define MSG_ANY		0x02
-#define MSG_BAND	0x04
-
-#define MORECTL		1
-#define MOREDATA	2
-
-#define	TBADADDR		1
-#define	TBADOPT			2
-#define	TACCES			3
-#define TBADF			4
-#define TNOADDR			5
-#define TOUTSTATE	        6
-#define TBADSEQ		        7
-#define TSYSERR			8
-#define TLOOK		        9
-#define TBADDATA	       10
-#define TBUFOVFLW	       11
-#define TFLOW		       12
-#define	TNODATA		       13
-#define TNODIS		       14
-#define TNOUDERR	       15
-#define TBADFLAG	       16
-#define TNOREL		       17
-#define TNOTSUPPORT	       18
-#define TSTATECHNG	       19
-
-#define T_CONN_REQ      0
-#define T_CONN_RES      1
-#define T_DISCON_REQ    2
-#define T_DATA_REQ      3
-#define T_EXDATA_REQ    4
-#define T_INFO_REQ      5
-#define T_BIND_REQ      6
-#define T_UNBIND_REQ    7
-#define T_UNITDATA_REQ  8
-#define T_OPTMGMT_REQ   9
-#define T_ORDREL_REQ    10
-
-#define T_CONN_IND      11
-#define T_CONN_CON      12
-#define T_DISCON_IND    13
-#define T_DATA_IND      14
-#define T_EXDATA_IND    15
-#define T_INFO_ACK      16
-#define T_BIND_ACK      17
-#define T_ERROR_ACK     18
-#define T_OK_ACK        19
-#define T_UNITDATA_IND  20
-#define T_UDERROR_IND   21
-#define T_OPTMGMT_ACK   22
-#define T_ORDREL_IND    23
-
-#define T_NEGOTIATE	0x0004
-#define T_FAILURE	0x0040
-
-#define TS_UNBND	0	/* unbound */
-#define	TS_WACK_BREQ	1	/* waiting for T_BIND_REQ ack  */
-#define TS_WACK_UREQ	2	/* waiting for T_UNBIND_REQ ack */
-#define TS_IDLE		3	/* idle */
-#define TS_WACK_OPTREQ	4	/* waiting for T_OPTMGMT_REQ ack */
-#define TS_WACK_CREQ	5	/* waiting for T_CONN_REQ ack */
-#define TS_WCON_CREQ	6	/* waiting for T_CONN_REQ confirmation */
-#define	TS_WRES_CIND	7	/* waiting for T_CONN_IND */
-#define TS_WACK_CRES	8	/* waiting for T_CONN_RES ack */
-#define TS_DATA_XFER	9	/* data transfer */
-#define TS_WIND_ORDREL	10	/* releasing read but not write */
-#define TS_WREQ_ORDREL	11      /* wait to release write but not read */
-#define TS_WACK_DREQ6	12	/* waiting for T_DISCON_REQ ack */
-#define TS_WACK_DREQ7	13	/* waiting for T_DISCON_REQ ack */
-#define TS_WACK_DREQ9	14	/* waiting for T_DISCON_REQ ack */
-#define TS_WACK_DREQ10	15	/* waiting for T_DISCON_REQ ack */
-#define TS_WACK_DREQ11	16	/* waiting for T_DISCON_REQ ack */
-#define TS_NOSTATES	17
-
-struct T_conn_req {
-	s32 PRIM_type; 
-	s32 DEST_length;
-	s32 DEST_offset;
-	s32 OPT_length;
-	s32 OPT_offset;
-};
-
-struct T_bind_req {
-	s32 PRIM_type;
-	s32 ADDR_length;
-	s32 ADDR_offset;
-	u32 CONIND_number;
-};
-
-struct T_unitdata_req {
-	s32 PRIM_type; 
-	s32 DEST_length;
-	s32 DEST_offset;
-	s32 OPT_length;
-	s32 OPT_offset;
-};
-
-struct T_optmgmt_req {
-	s32 PRIM_type; 
-	s32 OPT_length;
-	s32 OPT_offset;
-	s32 MGMT_flags;
-};
-
-struct T_bind_ack {
-	s32 PRIM_type;
-	s32 ADDR_length;
-	s32 ADDR_offset;
-	u32 CONIND_number;
-};
-
-struct T_error_ack {
-	s32 PRIM_type;
-	s32 ERROR_prim;
-	s32 TLI_error;
-	s32 UNIX_error;
-};
-
-struct T_ok_ack {
-	s32 PRIM_type;
-	s32 CORRECT_prim;
-};
-
-struct T_conn_ind {
-	s32 PRIM_type;
-	s32 SRC_length;
-	s32 SRC_offset;
-	s32 OPT_length;
-	s32 OPT_offset;
-	s32 SEQ_number;
-};
-
-struct T_conn_con {
-	s32 PRIM_type;
-	s32 RES_length;
-	s32 RES_offset;
-	s32 OPT_length;
-	s32 OPT_offset;
-};
-
-struct T_discon_ind {
-	s32 PRIM_type;
-	s32 DISCON_reason;
-	s32 SEQ_number;
-};
-
-struct T_unitdata_ind {
-	s32 PRIM_type;
-	s32 SRC_length;
-	s32 SRC_offset;
-	s32 OPT_length;
-	s32 OPT_offset;
-};
-
-struct T_optmgmt_ack {
-	s32 PRIM_type; 
-	s32 OPT_length;
-	s32 OPT_offset;
-	s32 MGMT_flags;
-};
-
-struct opthdr {
-	s32 level;
-	s32 name;
-	s32 len;
-	char value[0];	
-};
-
-struct T_primsg {
-	struct T_primsg *next;
-	unsigned char pri;
-	unsigned char band;
-	int length;
-	s32 type;
-};
-
-struct strbuf {
-	s32 maxlen;
-	s32 len;
-	u32 buf;
-} ;
-
-/* Constants used by STREAMS modules emulation code */
-
-typedef char sol_module;
-
-#define MAX_NR_STREAM_MODULES   16
-
-/* Private data structure assigned to sockets. */
-
-struct sol_socket_struct {
-        int magic;
-        int modcount;
-        sol_module module[MAX_NR_STREAM_MODULES];
-        long state;
-        int offset;
-        struct T_primsg *pfirst, *plast;
-};
-
-#define SOLARIS_SOCKET_MAGIC    0xADDED
-
diff --git a/arch/sparc64/solaris/systbl.S b/arch/sparc64/solaris/systbl.S
deleted file mode 100644
index 7043ca18caf9..000000000000
--- a/arch/sparc64/solaris/systbl.S
+++ /dev/null
@@ -1,285 +0,0 @@
-/* $Id: systbl.S,v 1.11 2000/03/13 21:57:35 davem Exp $
- * systbl.S: System call entry point table for Solaris compatibility.
- *
- * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
- */
-
-#include <asm/unistd.h>
-
-/* Fall back to sys_call_table32 entry */
-#define CHAIN(name)	__NR_##name
-
-/* Pass pt_regs pointer as first argument */
-#define REGS(name)	name+1
-
-/* Hack till all be implemented */
-#define solaris_getpmsg		solaris_unimplemented
-#define solaris_hrtsys		solaris_unimplemented
-#define solaris_msgsys		solaris_unimplemented
-#define solaris_putpmsg		solaris_unimplemented
-#define solaris_semsys		solaris_unimplemented
-
-        .data
-	.globl		solaris_sys_table
-solaris_sys_table:
-	.word solaris_unimplemented	/* nosys		0	*/
-	.word CHAIN(exit)		/* exit		d	1	*/
-	.word CHAIN(fork)		/* fork			2	*/
-	.word CHAIN(read)		/* read		dpd	3	*/
-	.word CHAIN(write)		/* write	dpd	4	*/
-	.word solaris_open		/* open		soo	5	*/
-	.word CHAIN(close)		/* close	d	6	*/
-	.word solaris_wait		/* wait		xxx	7	*/
-	.word CHAIN(creat)		/* creat	so	8	*/
-	.word CHAIN(link)		/* link		ss	9	*/
-	.word CHAIN(unlink)		/* unlink	s	10	*/
-	.word solaris_unimplemented	/* exec		sxx	11	*/
-	.word CHAIN(chdir)		/* chdir	s	12	*/
-	.word CHAIN(time)		/* time			13	*/
-	.word solaris_mknod		/* mknod	sox	14	*/
-	.word CHAIN(chmod)		/* chmod	so	15	*/ 
-	.word CHAIN(chown)		/* chown	sdd	16	*/
-	.word solaris_brk		/* brk/break	x	17	*/
-	.word solaris_stat		/* stat		sp	18	*/
-	.word CHAIN(lseek)		/* seek/lseek	ddd	19	*/
-	.word solaris_getpid		/* getpid		20	*/
-	.word solaris_unimplemented	/* mount		21	*/
-	.word CHAIN(umount)		/* umount	s	22	*/
-	.word CHAIN(setuid)		/* setuid	d	23	*/
-	.word solaris_getuid		/* getuid		24	*/
-	.word CHAIN(stime)		/* stime	d	25	*/
-#if 0
-	.word solaris_ptrace		/* ptrace	xdxx	26	*/
-#else
-	.word CHAIN(ptrace)		/* ptrace	xdxx	26	*/
-#endif
-	.word CHAIN(alarm)		/* alarm	d	27	*/
-	.word solaris_fstat		/* fstat	dp	28	*/
-	.word CHAIN(pause)		/* pause		29	*/
-	.word CHAIN(utime)		/* utime	xx	30	*/
-	.word solaris_unimplemented	/* stty			31	*/
-	.word solaris_unimplemented	/* gtty			32	*/
-	.word solaris_access		/* access	so	33	*/
-	.word CHAIN(nice)		/* nice		d	34	*/
-	.word solaris_statfs		/* statfs	spdd	35	*/
-	.word CHAIN(sync)		/* sync			36	*/
-	.word solaris_kill		/* kill		dd	37	*/
-	.word solaris_fstatfs		/* fstatfs	dpdd	38	*/
-	.word solaris_procids		/* pgrpsys	ddd	39	*/
-	.word solaris_unimplemented	/* xenix		40	*/
-	.word CHAIN(dup)		/* dup		d	41	*/
-	.word CHAIN(pipe)		/* pipe			42	*/
-	.word CHAIN(times)		/* times	p	43	*/
-	.word 44 /*CHAIN(profil)*/	/* prof		xxxx	44	*/
-	.word solaris_unimplemented	/* lock/plock		45	*/
-	.word CHAIN(setgid)		/* setgid	d	46	*/
-	.word solaris_getgid		/* getgid		47	*/
-	.word solaris_sigfunc		/* sigfunc	xx	48	*/
-	.word REGS(solaris_msgsys)	/* msgsys	dxddd	49	*/
-	.word solaris_unimplemented	/* syssun/3b		50	*/
-	.word CHAIN(acct)		/* acct/sysacct	x	51	*/
-	.word solaris_shmsys		/* shmsys	ddxo	52	*/
-	.word REGS(solaris_semsys)	/* semsys	dddx	53	*/
-	.word solaris_ioctl		/* ioctl	dxx	54	*/
-	.word solaris_unimplemented	/* uadmin	xxx	55	*/
-	.word solaris_unimplemented	/* reserved:exch	56	*/
-	.word solaris_utssys		/* utssys	x	57	*/
-	.word CHAIN(fsync)		/* fsync	d	58	*/
-	.word CHAIN(execve)		/* execv	spp	59	*/
-	.word CHAIN(umask)		/* umask	o	60	*/
-	.word CHAIN(chroot)		/* chroot	s	61	*/
-	.word solaris_fcntl		/* fcntl	dxx	62	*/
-	.word solaris_ulimit		/* ulimit	xx	63	*/
-	.word solaris_unimplemented	/* ?			64	*/
-	.word solaris_unimplemented	/* ?			65	*/
-	.word solaris_unimplemented	/* ?			66	*/
-	.word solaris_unimplemented	/* ?			67	*/
-	.word solaris_unimplemented	/* ?			68	*/
-	.word solaris_unimplemented	/* ?			69	*/
-	.word solaris_unimplemented	/* advfs		70	*/
-	.word solaris_unimplemented	/* unadvfs		71	*/
-	.word solaris_unimplemented	/* rmount		72	*/
-	.word solaris_unimplemented	/* rumount		73	*/
-	.word solaris_unimplemented	/* rfstart		74	*/
-	.word solaris_unimplemented	/* ?			75	*/
-	.word solaris_unimplemented	/* rdebug		76	*/
-	.word solaris_unimplemented	/* rfstop		77	*/
-	.word solaris_unimplemented	/* rfsys		78	*/
-	.word CHAIN(rmdir)		/* rmdir	s	79	*/
-	.word CHAIN(mkdir)		/* mkdir	so	80	*/
-	.word CHAIN(getdents)		/* getdents	dxd	81	*/
-	.word solaris_unimplemented	/* libattach		82	*/
-	.word solaris_unimplemented	/* libdetach		83	*/
-	.word CHAIN(sysfs)		/* sysfs	dxx	84	*/
-	.word solaris_getmsg		/* getmsg	dxxx	85	*/
-	.word solaris_putmsg		/* putmsg	dxxd	86	*/
-	.word CHAIN(poll)		/* poll		xdd	87	*/
-	.word solaris_lstat		/* lstat	sp	88	*/
-	.word CHAIN(symlink)		/* symlink	ss	89	*/
-	.word CHAIN(readlink)		/* readlink	spd	90	*/
-	.word CHAIN(setgroups)		/* setgroups	dp	91	*/
-	.word CHAIN(getgroups)		/* getgroups	dp	92	*/
-	.word CHAIN(fchmod)		/* fchmod	do	93	*/
-	.word CHAIN(fchown)		/* fchown	ddd	94	*/
-	.word solaris_sigprocmask	/* sigprocmask	dxx	95	*/
-	.word solaris_sigsuspend	/* sigsuspend	x	96	*/
-	.word solaris_sigaltstack	/* sigaltstack	xx	97	*/
-	.word solaris_sigaction		/* sigaction	dxx	98	*/
-	.word solaris_sigpending	/* sigpending	dd	99	*/
-	.word REGS(solaris_context)	/* context		100	*/
-	.word solaris_unimplemented	/* evsys		101	*/
-	.word solaris_unimplemented	/* evtrapret		102	*/
-	.word solaris_statvfs		/* statvfs	sp	103	*/
-	.word solaris_fstatvfs		/* fstatvfs	dp	104	*/
-	.word solaris_unimplemented	/* unknown		105	*/
-	.word solaris_unimplemented	/* nfssys		106	*/
-	.word solaris_waitid		/* waitid	ddxd	107	*/
-	.word solaris_unimplemented	/* sigsendsys	ddd	108	*/
-	.word REGS(solaris_hrtsys)	/* hrtsys	xxx	109	*/
-	.word solaris_unimplemented	/* acancel	dxd	110	*/
-	.word solaris_unimplemented	/* async		111	*/
-	.word solaris_unimplemented	/* priocntlsys		112	*/
-	.word solaris_pathconf		/* pathconf	sd	113	*/
-	.word CHAIN(mincore)		/* mincore	d	114	*/
-	.word solaris_mmap		/* mmap		xxxxdx	115	*/
-	.word CHAIN(mprotect)		/* mprotect	xdx	116	*/
-	.word CHAIN(munmap)		/* munmap	xd	117	*/
-	.word solaris_fpathconf		/* fpathconf	dd	118	*/
-	.word CHAIN(fork)		/* fork			119	*/
-	.word solaris_unimplemented	/* fchdir	d	120	*/
-	.word CHAIN(readv)		/* readv	dxd	121	*/
-	.word CHAIN(writev)		/* writev	dxd	122	*/
-	.word solaris_xstat		/* xstat	dsx	123	*/
-	.word solaris_lxstat		/* lxstat	dsx	124	*/
-	.word solaris_fxstat		/* fxstat	ddx	125	*/
-	.word solaris_xmknod		/* xmknod	dsox	126	*/
-	.word solaris_unimplemented	/* syslocal	d	127	*/
-	.word solaris_setrlimit		/* setrlimit	dp	128	*/
-	.word solaris_getrlimit		/* getrlimit	dp	129	*/
-	.word CHAIN(chown)		/* lchown	sdd	130	*/
-	.word solaris_unimplemented	/* memcntl		131	*/
-	.word solaris_getpmsg		/* getpmsg	dxxxx	132	*/
-	.word solaris_putpmsg		/* putpmsg	dxxdd	133	*/
-	.word CHAIN(rename)		/* rename	ss	134	*/
-	.word solaris_utsname		/* uname	x	135	*/
-	.word solaris_unimplemented	/* setegid		136	*/
-	.word solaris_sysconf		/* sysconfig	d	137	*/
-	.word solaris_unimplemented	/* adjtime		138	*/
-	.word solaris_sysinfo		/* systeminfo	dsd	139	*/
-	.word solaris_unimplemented	/* ?			140	*/
-	.word solaris_unimplemented	/* seteuid		141	*/
-	.word solaris_unimplemented	/* ?			142	*/
-	.word solaris_unimplemented	/* ?			143	*/
-	.word solaris_unimplemented	/* secsys	dx	144	*/
-	.word solaris_unimplemented	/* filepriv	sdxd	145	*/
-	.word solaris_unimplemented	/* procpriv	dxd	146	*/
-	.word solaris_unimplemented	/* devstat	sdx	147	*/
-	.word solaris_unimplemented	/* aclipc	ddddx	148	*/
-	.word solaris_unimplemented	/* fdevstat	ddx	149	*/
-	.word solaris_unimplemented	/* flvlfile	ddx	150	*/
-	.word solaris_unimplemented	/* lvlfile	sdx	151	*/
-	.word solaris_unimplemented	/* ?			152	*/
-	.word solaris_unimplemented	/* fchroot	d	153	*/
-	.word solaris_unimplemented	/* lvlproc	dx	154	*/
-	.word solaris_unimplemented	/* ?			155	*/
-	.word solaris_gettimeofday	/* gettimeofday	x	156	*/
-	.word CHAIN(getitimer)		/* getitimer	dx	157	*/
-	.word CHAIN(setitimer)		/* setitimer	dxx	158	*/
-	.word solaris_unimplemented	/* lwp-xxx		159	*/
-	.word solaris_unimplemented	/* lwp-xxx		160	*/
-	.word solaris_unimplemented	/* lwp-xxx		161	*/
-	.word solaris_unimplemented	/* lwp-xxx		162	*/
-	.word solaris_unimplemented	/* lwp-xxx		163	*/
-	.word solaris_unimplemented	/* lwp-xxx		164	*/
-	.word solaris_unimplemented	/* lwp-xxx		165	*/
-	.word solaris_unimplemented	/* lwp-xxx		166	*/
-	.word solaris_unimplemented	/* lwp-xxx		167	*/
-	.word solaris_unimplemented	/* lwp-xxx		168	*/
-	.word solaris_unimplemented	/* lwp-xxx		169	*/
-	.word solaris_unimplemented	/* lwp-xxx		170	*/
-	.word solaris_unimplemented	/* lwp-xxx		171	*/
-	.word solaris_unimplemented	/* lwp-xxx		172	*/
-	.word solaris_pread		/* pread	dpdd	173	*/
-	.word solaris_pwrite		/* pwrite	dpdd	174	*/
-	.word REGS(solaris_llseek)	/* llseek	dLd	175	*/
-	.word solaris_unimplemented	/* lwpself		176	*/
-	.word solaris_unimplemented	/* lwpinfo		177	*/
-	.word solaris_unimplemented	/* lwpprivate		178	*/
-	.word solaris_unimplemented	/* processorbind	179	*/
-	.word solaris_unimplemented	/* processorexbind	180	*/
-	.word solaris_unimplemented	/* 			181	*/
-	.word solaris_unimplemented	/* sync_mailbox		182	*/
-	.word solaris_unimplemented	/* prepblock		183	*/
-	.word solaris_unimplemented	/* block		184	*/
-	.word solaris_acl		/* acl		sddp	185	*/
-	.word solaris_unimplemented	/* unblock		186	*/
-	.word solaris_unimplemented	/* cancelblock		187	*/
-	.word solaris_unimplemented	/* ?			188	*/
-	.word solaris_unimplemented	/* xxxxx		189	*/
-	.word solaris_unimplemented	/* xxxxxe		190	*/
-	.word solaris_unimplemented	/*			191	*/
-	.word solaris_unimplemented	/*			192	*/
-	.word solaris_unimplemented	/*			193	*/
-	.word solaris_unimplemented	/*			194	*/
-	.word solaris_unimplemented	/* 			195	*/
-	.word solaris_unimplemented	/* 			196	*/
-	.word solaris_unimplemented	/* 			197	*/
-	.word solaris_unimplemented	/* 			198	*/
-	.word CHAIN(nanosleep)		/* nanosleep	dd	199	*/
-	.word solaris_facl		/* facl		dddp	200	*/
-	.word solaris_unimplemented	/* 			201	*/
-	.word CHAIN(setreuid)		/* setreuid	dd	202	*/
-	.word CHAIN(setregid)		/* setregid	dd	203	*/
-	.word solaris_unimplemented	/* 			204	*/
-	.word solaris_unimplemented	/* 			205	*/
-	.word solaris_unimplemented	/* 			206	*/
-	.word solaris_unimplemented	/* 			207	*/
-	.word solaris_unimplemented	/* 			208	*/
-	.word solaris_unimplemented	/* 			209	*/
-	.word solaris_unimplemented	/* 			210	*/
-	.word solaris_unimplemented	/* 			211	*/
-	.word solaris_unimplemented	/* 			212	*/
-	.word solaris_getdents64	/* getdents64	dpd	213	*/
-	.word REGS(solaris_mmap64)	/* mmap64	xxxxdX	214	*/
-	.word solaris_stat64		/* stat64	sP	215	*/
-	.word solaris_lstat64		/* lstat64	sP	216	*/
-	.word solaris_fstat64		/* fstat64	dP	217	*/
-	.word solaris_statvfs64		/* statvfs64	sP	218	*/
-	.word solaris_fstatvfs64	/* fstatvfs64	dP	219	*/
-	.word solaris_setrlimit64	/* setrlimit64	dP	220	*/
-	.word solaris_getrlimit64	/* getrlimit64	dP	221	*/
-	.word CHAIN(pread64)		/* pread64	dpdD	222	*/
-	.word CHAIN(pwrite64)		/* pwrite64	dpdD	223	*/
-	.word CHAIN(creat)		/* creat64	so	224	*/
-	.word solaris_open		/* open64	soo	225	*/
-	.word solaris_unimplemented	/* 			226	*/
-	.word solaris_unimplemented	/* 			227	*/
-	.word solaris_unimplemented	/* 			228	*/
-	.word solaris_unimplemented	/* 			229	*/
-	.word solaris_socket		/* socket	ddd	230	*/
-	.word solaris_socketpair	/* socketpair	dddp	231	*/
-	.word solaris_bind		/* bind		dpd	232	*/
-	.word solaris_listen		/* listen	dd	233	*/
-	.word solaris_accept		/* accept	dpp	234	*/
-	.word solaris_connect		/* connect	dpd	235	*/
-	.word solaris_shutdown		/* shutdown	dd	236	*/
-	.word solaris_recv		/* recv		dpdd	237	*/
-	.word solaris_recvfrom		/* recvfrom	dpddpp	238	*/
-	.word solaris_recvmsg		/* recvmsg	dpd	239	*/
-	.word solaris_send		/* send		dpdd	240	*/
-	.word solaris_sendmsg		/* sendmsg	dpd	241	*/
-	.word solaris_sendto		/* sendto	dpddpd	242	*/
-	.word solaris_getpeername	/* getpeername	dpp	243	*/
-	.word solaris_getsockname	/* getsockname	dpp	244	*/
-	.word solaris_getsockopt	/* getsockopt	dddpp	245	*/
-	.word solaris_setsockopt	/* setsockopt	dddpp	246	*/
-	.word solaris_unimplemented	/* 			247	*/
-	.word solaris_ntp_gettime	/* ntp_gettime	p	248	*/
-	.word solaris_ntp_adjtime	/* ntp_adjtime	p	249	*/
-	.word solaris_unimplemented	/* 			250	*/
-	.word solaris_unimplemented	/* 			251	*/
-	.word solaris_unimplemented	/* 			252	*/
-	.word solaris_unimplemented	/* 			253	*/
-	.word solaris_unimplemented	/* 			254	*/
-	.word solaris_unimplemented	/* 			255	*/
diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c
deleted file mode 100644
index f53123c02c2b..000000000000
--- a/arch/sparc64/solaris/timod.c
+++ /dev/null
@@ -1,976 +0,0 @@
-/* $Id: timod.c,v 1.19 2002/02/08 03:57:14 davem Exp $
- * timod.c: timod emulation.
- *
- * Copyright (C) 1998 Patrik Rak (prak3264@ss1000.ms.mff.cuni.cz)
- *
- * Streams & timod emulation based on code
- * Copyright (C) 1995, 1996 Mike Jagdis (jaggy@purplet.demon.co.uk)
- *
- */
- 
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/ioctl.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/netdevice.h>
-#include <linux/poll.h>
-
-#include <net/sock.h>
-
-#include <asm/uaccess.h>
-#include <asm/termios.h>
-
-#include "conv.h"
-#include "socksys.h"
-
-asmlinkage int solaris_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
-
-static DEFINE_SPINLOCK(timod_pagelock);
-static char * page = NULL ;
-
-#ifndef DEBUG_SOLARIS_KMALLOC
-
-#define mykmalloc kmalloc
-#define mykfree kfree
-
-#else
-
-void * mykmalloc(size_t s, gfp_t gfp)
-{
-	static char * page;
-	static size_t free;
-	void * r;
-	s = ((s + 63) & ~63);
-	if( s > PAGE_SIZE ) {
-		SOLD("too big size, calling real kmalloc");
-		return kmalloc(s, gfp);
-	}
-	if( s > free ) {
-		/* we are wasting memory, but we don't care */
-		page = (char *)__get_free_page(gfp);
-		free = PAGE_SIZE;
-	}
-	r = page;
-	page += s;
-	free -= s;
-	return r;
-}
-
-void mykfree(void *p)
-{
-}
-
-#endif
-
-#ifndef DEBUG_SOLARIS
-
-#define BUF_SIZE	PAGE_SIZE
-#define PUT_MAGIC(a,m)
-#define SCHECK_MAGIC(a,m)
-#define BUF_OFFSET	0
-#define MKCTL_TRAILER	0
-
-#else
-
-#define BUF_SIZE	(PAGE_SIZE-2*sizeof(u64))
-#define BUFPAGE_MAGIC	0xBADC0DEDDEADBABEL
-#define MKCTL_MAGIC	0xDEADBABEBADC0DEDL
-#define PUT_MAGIC(a,m)	do{(*(u64*)(a))=(m);}while(0)
-#define SCHECK_MAGIC(a,m)	do{if((*(u64*)(a))!=(m))printk("%s,%u,%s(): magic %08x at %p corrupted!\n",\
-				__FILE__,__LINE__,__FUNCTION__,(m),(a));}while(0)
-#define BUF_OFFSET	sizeof(u64)
-#define MKCTL_TRAILER	sizeof(u64)
-
-#endif
-
-static char *getpage( void )
-{
-	char *r;
-	SOLD("getting page");
-	spin_lock(&timod_pagelock);
-	if (page) {
-		r = page;
-		page = NULL;
-		spin_unlock(&timod_pagelock);
-		SOLD("got cached");
-		return r + BUF_OFFSET;
-	}
-	spin_unlock(&timod_pagelock);
-	SOLD("getting new");
-	r = (char *)__get_free_page(GFP_KERNEL);
-	PUT_MAGIC(r,BUFPAGE_MAGIC);
-	PUT_MAGIC(r+PAGE_SIZE-sizeof(u64),BUFPAGE_MAGIC);
-	return r + BUF_OFFSET;
-}
-
-static void putpage(char *p)
-{
-	SOLD("putting page");
-	p = p - BUF_OFFSET;
-	SCHECK_MAGIC(p,BUFPAGE_MAGIC);
-	SCHECK_MAGIC(p+PAGE_SIZE-sizeof(u64),BUFPAGE_MAGIC);
-	spin_lock(&timod_pagelock);
-	if (page) {
-		spin_unlock(&timod_pagelock);
-		free_page((unsigned long)p);
-		SOLD("freed it");
-	} else {
-		page = p;
-		spin_unlock(&timod_pagelock);
-		SOLD("cached it");
-	}
-}
-
-static struct T_primsg *timod_mkctl(int size)
-{
-	struct T_primsg *it;
-
-	SOLD("creating primsg");
-	it = (struct T_primsg *)mykmalloc(size+sizeof(*it)-sizeof(s32)+2*MKCTL_TRAILER, GFP_KERNEL);
-	if (it) {
-		SOLD("got it");
-		it->pri = MSG_HIPRI;
-		it->length = size;
-		PUT_MAGIC((char*)((u64)(((char *)&it->type)+size+7)&~7),MKCTL_MAGIC);
-	}
-	return it;
-}
-
-static void timod_wake_socket(unsigned int fd)
-{
-	struct socket *sock;
-	struct fdtable *fdt;
-
-	SOLD("wakeing socket");
-	fdt = files_fdtable(current->files);
-	sock = SOCKET_I(fdt->fd[fd]->f_path.dentry->d_inode);
-	wake_up_interruptible(&sock->wait);
-	read_lock(&sock->sk->sk_callback_lock);
-	if (sock->fasync_list && !test_bit(SOCK_ASYNC_WAITDATA, &sock->flags))
-		__kill_fasync(sock->fasync_list, SIGIO, POLL_IN);
-	read_unlock(&sock->sk->sk_callback_lock);
-	SOLD("done");
-}
-
-static void timod_queue(unsigned int fd, struct T_primsg *it)
-{
-	struct sol_socket_struct *sock;
-	struct fdtable *fdt;
-
-	SOLD("queuing primsg");
-	fdt = files_fdtable(current->files);
-	sock = (struct sol_socket_struct *)fdt->fd[fd]->private_data;
-	it->next = sock->pfirst;
-	sock->pfirst = it;
-	if (!sock->plast)
-		sock->plast = it;
-	timod_wake_socket(fd);
-	SOLD("done");
-}
-
-static void timod_queue_end(unsigned int fd, struct T_primsg *it)
-{
-	struct sol_socket_struct *sock;
-	struct fdtable *fdt;
-
-	SOLD("queuing primsg at end");
-	fdt = files_fdtable(current->files);
-	sock = (struct sol_socket_struct *)fdt->fd[fd]->private_data;
-	it->next = NULL;
-	if (sock->plast)
-		sock->plast->next = it;
-	else
-		sock->pfirst = it;
-	sock->plast = it;
-	SOLD("done");
-}
-
-static void timod_error(unsigned int fd, int prim, int terr, int uerr)
-{
-	struct T_primsg *it;
-	
-	SOLD("making error");
-	it = timod_mkctl(sizeof(struct T_error_ack));
-	if (it) {
-		struct T_error_ack *err = (struct T_error_ack *)&it->type;
-		
-		SOLD("got it");
-		err->PRIM_type = T_ERROR_ACK;
-		err->ERROR_prim = prim;
-		err->TLI_error = terr;
-		err->UNIX_error = uerr; /* FIXME: convert this */
-		timod_queue(fd, it);
-	}
-	SOLD("done");
-}
-
-static void timod_ok(unsigned int fd, int prim)
-{
-	struct T_primsg *it;
-	struct T_ok_ack *ok;
-	
-	SOLD("creating ok ack");
-	it = timod_mkctl(sizeof(*ok));
-	if (it) {
-		SOLD("got it");
-		ok = (struct T_ok_ack *)&it->type;
-		ok->PRIM_type = T_OK_ACK;
-		ok->CORRECT_prim = prim;
-		timod_queue(fd, it);
-	}
-	SOLD("done");
-}
-
-static int timod_optmgmt(unsigned int fd, int flag, char __user *opt_buf, int opt_len, int do_ret)
-{
-	int error, failed;
-	int ret_space, ret_len;
-	long args[5];
-	char *ret_pos,*ret_buf;
-	int (*sys_socketcall)(int, unsigned long *) =
-		(int (*)(int, unsigned long *))SYS(socketcall);
-	mm_segment_t old_fs = get_fs();
-
-	SOLD("entry");
-	SOLDD(("fd %u flg %u buf %p len %u doret %u",fd,flag,opt_buf,opt_len,do_ret));
-	if (!do_ret && (!opt_buf || opt_len <= 0))
-		return 0;
-	SOLD("getting page");
-	ret_pos = ret_buf = getpage();
-	ret_space = BUF_SIZE;
-	ret_len = 0;
-	
-	error = failed = 0;
-	SOLD("looping");
-	while(opt_len >= sizeof(struct opthdr)) {
-		struct opthdr *opt;
-		int orig_opt_len; 
-		SOLD("loop start");
-		opt = (struct opthdr *)ret_pos; 
-		if (ret_space < sizeof(struct opthdr)) {
-			failed = TSYSERR;
-			break;
-		}
-		SOLD("getting opthdr");
-		if (copy_from_user(opt, opt_buf, sizeof(struct opthdr)) ||
-			opt->len > opt_len) {
-			failed = TBADOPT;
-			break;
-		}
-		SOLD("got opthdr");
-		if (flag == T_NEGOTIATE) {
-			char *buf;
-			
-			SOLD("handling T_NEGOTIATE");
-			buf = ret_pos + sizeof(struct opthdr);
-			if (ret_space < opt->len + sizeof(struct opthdr) ||
-				copy_from_user(buf, opt_buf+sizeof(struct opthdr), opt->len)) {
-				failed = TSYSERR;
-				break;
-			}
-			SOLD("got optdata");
-			args[0] = fd;
-			args[1] = opt->level;
-			args[2] = opt->name;
-			args[3] = (long)buf;
-			args[4] = opt->len;
-			SOLD("calling SETSOCKOPT");
-			set_fs(KERNEL_DS);
-			error = sys_socketcall(SYS_SETSOCKOPT, args);
-			set_fs(old_fs);
-			if (error) {
-				failed = TBADOPT;
-				break;
-			}
-			SOLD("SETSOCKOPT ok");
-		}
-		orig_opt_len = opt->len;
-		opt->len = ret_space - sizeof(struct opthdr);
-		if (opt->len < 0) {
-			failed = TSYSERR;
-			break;
-		}
-		args[0] = fd;
-		args[1] = opt->level;
-		args[2] = opt->name;
-		args[3] = (long)(ret_pos+sizeof(struct opthdr));
-		args[4] = (long)&opt->len;
-		SOLD("calling GETSOCKOPT");
-		set_fs(KERNEL_DS);
-		error = sys_socketcall(SYS_GETSOCKOPT, args);
-		set_fs(old_fs);
-		if (error) {
-			failed = TBADOPT;
-			break;
-		}
-		SOLD("GETSOCKOPT ok");
-		ret_space -= sizeof(struct opthdr) + opt->len;
-		ret_len += sizeof(struct opthdr) + opt->len;
-		ret_pos += sizeof(struct opthdr) + opt->len;
-		opt_len -= sizeof(struct opthdr) + orig_opt_len;
-		opt_buf += sizeof(struct opthdr) + orig_opt_len;
-		SOLD("loop end");
-	}
-	SOLD("loop done");
-	if (do_ret) {
-		SOLD("generating ret msg");
-		if (failed)
-			timod_error(fd, T_OPTMGMT_REQ, failed, -error);
-		else {
-			struct T_primsg *it;
-			it = timod_mkctl(sizeof(struct T_optmgmt_ack) + ret_len);
-			if (it) {
-				struct T_optmgmt_ack *ack =
-					(struct T_optmgmt_ack *)&it->type;
-				SOLD("got primsg");
-				ack->PRIM_type = T_OPTMGMT_ACK;
-				ack->OPT_length = ret_len;
-				ack->OPT_offset = sizeof(struct T_optmgmt_ack);
-				ack->MGMT_flags = (failed ? T_FAILURE : flag);
-				memcpy(((char*)ack)+sizeof(struct T_optmgmt_ack),
-					ret_buf, ret_len);
-				timod_queue(fd, it);
-			}
-		}
-	}
-	SOLDD(("put_page %p\n", ret_buf));
-	putpage(ret_buf);
-	SOLD("done");	
-	return 0;
-}
-
-int timod_putmsg(unsigned int fd, char __user *ctl_buf, int ctl_len,
-			char __user *data_buf, int data_len, int flags)
-{
-	int ret, error, terror;
-	char *buf;
-	struct file *filp;
-	struct inode *ino;
-	struct fdtable *fdt;
-	struct sol_socket_struct *sock;
-	mm_segment_t old_fs = get_fs();
-	long args[6];
-	int (*sys_socketcall)(int, unsigned long __user *) =
-		(int (*)(int, unsigned long __user *))SYS(socketcall);
-	int (*sys_sendto)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int) =
-		(int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int))SYS(sendto);
-
-	fdt = files_fdtable(current->files);
-	filp = fdt->fd[fd];
-	ino = filp->f_path.dentry->d_inode;
-	sock = (struct sol_socket_struct *)filp->private_data;
-	SOLD("entry");
-	if (get_user(ret, (int __user *)A(ctl_buf)))
-		return -EFAULT;
-	switch (ret) {
-	case T_BIND_REQ:
-	{
-		struct T_bind_req req;
-		
-		SOLDD(("bind %016lx(%016lx)\n", sock, filp));
-		SOLD("T_BIND_REQ");
-		if (sock->state != TS_UNBND) {
-			timod_error(fd, T_BIND_REQ, TOUTSTATE, 0);
-			return 0;
-		}
-		SOLD("state ok");
-		if (copy_from_user(&req, ctl_buf, sizeof(req))) {
-			timod_error(fd, T_BIND_REQ, TSYSERR, EFAULT);
-			return 0;
-		}
-		SOLD("got ctl req");
-		if (req.ADDR_offset && req.ADDR_length) {
-			if (req.ADDR_length > BUF_SIZE) {
-				timod_error(fd, T_BIND_REQ, TSYSERR, EFAULT);
-				return 0;
-			}
-			SOLD("req size ok");
-			buf = getpage();
-			if (copy_from_user(buf, ctl_buf + req.ADDR_offset, req.ADDR_length)) {
-				timod_error(fd, T_BIND_REQ, TSYSERR, EFAULT);
-				putpage(buf);
-				return 0;
-			}
-			SOLD("got ctl data");
-			args[0] = fd;
-			args[1] = (long)buf;
-			args[2] = req.ADDR_length;
-			SOLD("calling BIND");
-			set_fs(KERNEL_DS);
-			error = sys_socketcall(SYS_BIND, args);
-			set_fs(old_fs);
-			putpage(buf);
-			SOLD("BIND returned");
-		} else 
-			error = 0;
-		if (!error) {
-			struct T_primsg *it;
-			if (req.CONIND_number) {
-	  			args[0] = fd;
-  				args[1] = req.CONIND_number;
-  				SOLD("calling LISTEN");
-  				set_fs(KERNEL_DS);
-	  			error = sys_socketcall(SYS_LISTEN, args);
-  				set_fs(old_fs);
-  				SOLD("LISTEN done");
-  			}
-			it = timod_mkctl(sizeof(struct T_bind_ack)+sizeof(struct sockaddr));
-			if (it) {
-				struct T_bind_ack *ack;
-
-				ack = (struct T_bind_ack *)&it->type;
-				ack->PRIM_type = T_BIND_ACK;
-				ack->ADDR_offset = sizeof(*ack);
-				ack->ADDR_length = sizeof(struct sockaddr);
-				ack->CONIND_number = req.CONIND_number;
-				args[0] = fd;
-				args[1] = (long)(ack+sizeof(*ack));
-				args[2] = (long)&ack->ADDR_length;
-				set_fs(KERNEL_DS);
-				sys_socketcall(SYS_GETSOCKNAME,args);
-				set_fs(old_fs);
-				sock->state = TS_IDLE;
-				timod_ok(fd, T_BIND_REQ);
-				timod_queue_end(fd, it);
-				SOLD("BIND done");
-				return 0;
-			}
-		}
-		SOLD("some error");
-		switch (error) {
-			case -EINVAL:
-				terror = TOUTSTATE;
-				error = 0;
-				break;
-			case -EACCES:
-				terror = TACCES;
-				error = 0;
-				break;
-			case -EADDRNOTAVAIL:
-			case -EADDRINUSE:
-				terror = TNOADDR;
-				error = 0;
-				break;
-			default:
-				terror = TSYSERR;
-				break;
-		}
-		timod_error(fd, T_BIND_REQ, terror, -error);
-		SOLD("BIND done");
-		return 0;
-	}
-	case T_CONN_REQ:
-	{
-		struct T_conn_req req;
-		unsigned short oldflags;
-		struct T_primsg *it;
-		SOLD("T_CONN_REQ");
-		if (sock->state != TS_UNBND && sock->state != TS_IDLE) {
-			timod_error(fd, T_CONN_REQ, TOUTSTATE, 0);
-			return 0;
-		}
-		SOLD("state ok");
-		if (copy_from_user(&req, ctl_buf, sizeof(req))) {
-			timod_error(fd, T_CONN_REQ, TSYSERR, EFAULT);
-			return 0;
-		}
-		SOLD("got ctl req");
-		if (ctl_len > BUF_SIZE) {
-			timod_error(fd, T_CONN_REQ, TSYSERR, EFAULT);
-			return 0;
-		}
-		SOLD("req size ok");
-		buf = getpage();
-		if (copy_from_user(buf, ctl_buf, ctl_len)) {
-			timod_error(fd, T_CONN_REQ, TSYSERR, EFAULT);
-			putpage(buf);
-			return 0;
-		}
-#ifdef DEBUG_SOLARIS		
-		{
-			char * ptr = buf;
-			int len = ctl_len;
-			printk("returned data (%d bytes): ",len);
-			while( len-- ) {
-				if (!(len & 7))
-					printk(" ");
-				printk("%02x",(unsigned char)*ptr++);
-			}
-			printk("\n");
-		}
-#endif
-		SOLD("got ctl data");
-		args[0] = fd;
-		args[1] = (long)buf+req.DEST_offset;
-		args[2] = req.DEST_length;
-		oldflags = filp->f_flags;
-		filp->f_flags &= ~O_NONBLOCK;
-		SOLD("calling CONNECT");
-		set_fs(KERNEL_DS);
-		error = sys_socketcall(SYS_CONNECT, args);
-		set_fs(old_fs);
-		filp->f_flags = oldflags;
-		SOLD("CONNECT done");
-		if (!error) {
-			struct T_conn_con *con;
-			SOLD("no error");
-			it = timod_mkctl(ctl_len);
-			if (!it) {
-				putpage(buf);
-				return -ENOMEM;
-			}
-			con = (struct T_conn_con *)&it->type;
-#ifdef DEBUG_SOLARIS			
-			{
-				char * ptr = buf;
-				int len = ctl_len;
-				printk("returned data (%d bytes): ",len);
-				while( len-- ) {
-					if (!(len & 7))
-						printk(" ");
-					printk("%02x",(unsigned char)*ptr++);
-				}
-				printk("\n");
-			}
-#endif
-			memcpy(con, buf, ctl_len);
-			SOLD("copied ctl_buf");
-			con->PRIM_type = T_CONN_CON;
-			sock->state = TS_DATA_XFER;
-		} else {
-			struct T_discon_ind *dis;
-			SOLD("some error");
-			it = timod_mkctl(sizeof(*dis));
-			if (!it) {
-				putpage(buf);
-				return -ENOMEM;
-			}
-			SOLD("got primsg");
-			dis = (struct T_discon_ind *)&it->type;
-			dis->PRIM_type = T_DISCON_IND;
-			dis->DISCON_reason = -error;	/* FIXME: convert this as in iABI_errors() */
-			dis->SEQ_number = 0;
-		}
-		putpage(buf);
-		timod_ok(fd, T_CONN_REQ);
-		it->pri = 0;
-		timod_queue_end(fd, it);
-		SOLD("CONNECT done");
-		return 0;
-	}
-	case T_OPTMGMT_REQ:
-	{
-		struct T_optmgmt_req req;
-		SOLD("OPTMGMT_REQ");
-		if (copy_from_user(&req, ctl_buf, sizeof(req)))
-			return -EFAULT;
-		SOLD("got req");
-		return timod_optmgmt(fd, req.MGMT_flags,
-				req.OPT_offset > 0 ? ctl_buf + req.OPT_offset : NULL,
-				req.OPT_length, 1);
-	}
-	case T_UNITDATA_REQ:
-	{
-		struct T_unitdata_req req;
-		
-		int err;
-		SOLD("T_UNITDATA_REQ");
-		if (sock->state != TS_IDLE && sock->state != TS_DATA_XFER) {
-			timod_error(fd, T_CONN_REQ, TOUTSTATE, 0);
-			return 0;
-		}
-		SOLD("state ok");
-		if (copy_from_user(&req, ctl_buf, sizeof(req))) {
-			timod_error(fd, T_CONN_REQ, TSYSERR, EFAULT);
-			return 0;
-		}
-		SOLD("got ctl req");
-#ifdef DEBUG_SOLARIS		
-		{
-			char * ptr = ctl_buf+req.DEST_offset;
-			int len = req.DEST_length;
-			printk("socket address (%d bytes): ",len);
-			while( len-- ) {
-				char c;
-				if (get_user(c,ptr))
-					printk("??");
-				else
-					printk("%02x",(unsigned char)c);
-				ptr++;
-			}
-			printk("\n");
-		}
-#endif		
-		err = sys_sendto(fd, data_buf, data_len, 0, req.DEST_length > 0 ? (struct sockaddr __user *)(ctl_buf+req.DEST_offset) : NULL, req.DEST_length);
-		if (err == data_len)
-			return 0;
-		if(err >= 0) {
-			printk("timod: sendto failed to send all the data\n");
-			return 0;
-		}
-		timod_error(fd, T_CONN_REQ, TSYSERR, -err);
-		return 0;
-	}
-	default:
-		printk(KERN_INFO "timod_putmsg: unsupported command %u.\n", ret);
-		break;
-	}
-	return -EINVAL;
-}
-
-int timod_getmsg(unsigned int fd, char __user *ctl_buf, int ctl_maxlen, s32 __user *ctl_len,
-			char __user *data_buf, int data_maxlen, s32 __user *data_len, int *flags_p)
-{
-	int error;
-	int oldflags;
-	struct file *filp;
-	struct inode *ino;
-	struct fdtable *fdt;
-	struct sol_socket_struct *sock;
-	struct T_unitdata_ind udi;
-	mm_segment_t old_fs = get_fs();
-	long args[6];
-	char __user *tmpbuf;
-	int tmplen;
-	int (*sys_socketcall)(int, unsigned long __user *) =
-		(int (*)(int, unsigned long __user *))SYS(socketcall);
-	int (*sys_recvfrom)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *);
-	
-	SOLD("entry");
-	SOLDD(("%u %p %d %p %p %d %p %d\n", fd, ctl_buf, ctl_maxlen, ctl_len, data_buf, data_maxlen, data_len, *flags_p));
-	fdt = files_fdtable(current->files);
-	filp = fdt->fd[fd];
-	ino = filp->f_path.dentry->d_inode;
-	sock = (struct sol_socket_struct *)filp->private_data;
-	SOLDD(("%p %p\n", sock->pfirst, sock->pfirst ? sock->pfirst->next : NULL));
-	if ( ctl_maxlen > 0 && !sock->pfirst && SOCKET_I(ino)->type == SOCK_STREAM
-		&& sock->state == TS_IDLE) {
-		SOLD("calling LISTEN");
-		args[0] = fd;
-		args[1] = -1;
-		set_fs(KERNEL_DS);
-		sys_socketcall(SYS_LISTEN, args);
-		set_fs(old_fs);
-		SOLD("LISTEN done");
-	}
-	if (!(filp->f_flags & O_NONBLOCK)) {
-		struct poll_wqueues wait_table;
-		poll_table *wait;
-
-		poll_initwait(&wait_table);
-		wait = &wait_table.pt;
-		for(;;) {
-			SOLD("loop");
-			set_current_state(TASK_INTERRUPTIBLE);
-			/* ! ( l<0 || ( l>=0 && ( ! pfirst || (flags == HIPRI && pri != HIPRI) ) ) ) */ 
-			/* ( ! l<0 && ! ( l>=0 && ( ! pfirst || (flags == HIPRI && pri != HIPRI) ) ) ) */ 
-			/* ( l>=0 && ( ! l>=0 || ! ( ! pfirst || (flags == HIPRI && pri != HIPRI) ) ) ) */ 
-			/* ( l>=0 && ( l<0 || ( pfirst && ! (flags == HIPRI && pri != HIPRI) ) ) ) */ 
-			/* ( l>=0 && ( l<0 || ( pfirst && (flags != HIPRI || pri == HIPRI) ) ) ) */ 
-			/* ( l>=0 && ( pfirst && (flags != HIPRI || pri == HIPRI) ) ) */ 
-			if (ctl_maxlen >= 0 && sock->pfirst && (*flags_p != MSG_HIPRI || sock->pfirst->pri == MSG_HIPRI))
-				break;
-			SOLD("cond 1 passed");
-			if (
-			#if 1
-				*flags_p != MSG_HIPRI &&
-			#endif
-				((filp->f_op->poll(filp, wait) & POLLIN) ||
-				(filp->f_op->poll(filp, NULL) & POLLIN) ||
-				signal_pending(current))
-			) {
-				break;
-			}
-			if( *flags_p == MSG_HIPRI ) {
-				SOLD("avoiding lockup");
-				break ;
-			}
-			if(wait_table.error) {
-				SOLD("wait-table error");
-				poll_freewait(&wait_table);
-				return wait_table.error;
-			}
-			SOLD("scheduling");
-			schedule();
-		}
-		SOLD("loop done");
-		current->state = TASK_RUNNING;
-		poll_freewait(&wait_table);
-		if (signal_pending(current)) {
-			SOLD("signal pending");
-			return -EINTR;
-		}
-	}
-	if (ctl_maxlen >= 0 && sock->pfirst) {
-		struct T_primsg *it = sock->pfirst;
-		int l = min_t(int, ctl_maxlen, it->length);
-		SCHECK_MAGIC((char*)((u64)(((char *)&it->type)+sock->offset+it->length+7)&~7),MKCTL_MAGIC);
-		SOLD("purting ctl data");
-		if(copy_to_user(ctl_buf,
-			(char*)&it->type + sock->offset, l))
-			return -EFAULT;
-		SOLD("pur it");
-		if(put_user(l, ctl_len))
-			return -EFAULT;
-		SOLD("set ctl_len");
-		*flags_p = it->pri;
-		it->length -= l;
-		if (it->length) {
-			SOLD("more ctl");
-			sock->offset += l;
-			return MORECTL;
-		} else {
-			SOLD("removing message");
-			sock->pfirst = it->next;
-			if (!sock->pfirst)
-				sock->plast = NULL;
-			SOLDD(("getmsg kfree %016lx->%016lx\n", it, sock->pfirst));
-			mykfree(it);
-			sock->offset = 0;
-			SOLD("ctl done");
-			return 0;
-		}
-	}
-	*flags_p = 0;
-	if (ctl_maxlen >= 0) {
-		SOLD("ACCEPT perhaps?");
-		if (SOCKET_I(ino)->type == SOCK_STREAM && sock->state == TS_IDLE) {
-			struct T_conn_ind ind;
-			char *buf = getpage();
-			int len = BUF_SIZE;
-
-			SOLD("trying ACCEPT");
-			if (put_user(ctl_maxlen - sizeof(ind), ctl_len))
-				return -EFAULT;
-			args[0] = fd;
-			args[1] = (long)buf;
-			args[2] = (long)&len;
-			oldflags = filp->f_flags;
-			filp->f_flags |= O_NONBLOCK;
-			SOLD("calling ACCEPT");
-			set_fs(KERNEL_DS);
-			error = sys_socketcall(SYS_ACCEPT, args);
-			set_fs(old_fs);
-			filp->f_flags = oldflags;
-			if (error < 0) {
-				SOLD("some error");
-				putpage(buf);
-				return error;
-			}
-			if (error) {
-				SOLD("connect");
-				putpage(buf);
-				if (sizeof(ind) > ctl_maxlen) {
-					SOLD("generating CONN_IND");
-					ind.PRIM_type = T_CONN_IND;
-					ind.SRC_length = len;
-					ind.SRC_offset = sizeof(ind);
-					ind.OPT_length = ind.OPT_offset = 0;
-					ind.SEQ_number = error;
-					if(copy_to_user(ctl_buf, &ind, sizeof(ind))||
-					   put_user(sizeof(ind)+ind.SRC_length,ctl_len))
-						return -EFAULT;
-					SOLD("CONN_IND created");
-				}
-				if (data_maxlen >= 0)
-					put_user(0, data_len);
-				SOLD("CONN_IND done");
-				return 0;
-			}
-			if (len>ctl_maxlen) {
-				SOLD("data don't fit");
-				putpage(buf);
-				return -EFAULT;		/* XXX - is this ok ? */
-			}
-			if(copy_to_user(ctl_buf,buf,len) || put_user(len,ctl_len)){
-				SOLD("can't copy data");
-				putpage(buf);
-				return -EFAULT;
-			}
-			SOLD("ACCEPT done");
-			putpage(buf);
-		}
-	}
-	SOLD("checking data req");
-	if (data_maxlen <= 0) {
-		if (data_maxlen == 0)
-			put_user(0, data_len);
-		if (ctl_maxlen >= 0)
-			put_user(0, ctl_len);
-		return -EAGAIN;
-	}
-	SOLD("wants data");
-	if (ctl_maxlen > sizeof(udi) && sock->state == TS_IDLE) {
-		SOLD("udi fits");
-		tmpbuf = ctl_buf + sizeof(udi);
-		tmplen = ctl_maxlen - sizeof(udi);
-	} else {
-		SOLD("udi does not fit");
-		tmpbuf = NULL;
-		tmplen = 0;
-	}
-	if (put_user(tmplen, ctl_len))
-		return -EFAULT;
-	SOLD("set ctl_len");
-	oldflags = filp->f_flags;
-	filp->f_flags |= O_NONBLOCK;
-	SOLD("calling recvfrom");
-	sys_recvfrom = (int (*)(int, void __user *, size_t, unsigned, struct sockaddr __user *, int __user *))SYS(recvfrom);
-	error = sys_recvfrom(fd, data_buf, data_maxlen, 0, (struct sockaddr __user *)tmpbuf, ctl_len);
-	filp->f_flags = oldflags;
-	if (error < 0)
-		return error;
-	SOLD("error >= 0" ) ;
-	if (error && ctl_maxlen > sizeof(udi) && sock->state == TS_IDLE) {
-		SOLD("generating udi");
-		udi.PRIM_type = T_UNITDATA_IND;
-		if (get_user(udi.SRC_length, ctl_len))
-			return -EFAULT;
-		udi.SRC_offset = sizeof(udi);
-		udi.OPT_length = udi.OPT_offset = 0;
-		if (copy_to_user(ctl_buf, &udi, sizeof(udi)) ||
-		    put_user(sizeof(udi)+udi.SRC_length, ctl_len))
-			return -EFAULT;
-		SOLD("udi done");
-	} else {
-		if (put_user(0, ctl_len))
-			return -EFAULT;
-	}
-	put_user(error, data_len);
-	SOLD("done");
-	return 0;
-}
-
-asmlinkage int solaris_getmsg(unsigned int fd, u32 arg1, u32 arg2, u32 arg3)
-{
-	struct file *filp;
-	struct inode *ino;
-	struct strbuf __user *ctlptr;
-	struct strbuf __user *datptr;
-	struct strbuf ctl, dat;
-	int __user *flgptr;
-	int flags;
-	int error = -EBADF;
-	struct fdtable *fdt;
-
-	SOLD("entry");
-	lock_kernel();
-	if (fd >= sysctl_nr_open)
-		goto out;
-
-	fdt = files_fdtable(current->files);
-	filp = fdt->fd[fd];
-	if(!filp) goto out;
-
-	ino = filp->f_path.dentry->d_inode;
-	if (!ino || !S_ISSOCK(ino->i_mode))
-		goto out;
-
-	ctlptr = (struct strbuf __user *)A(arg1);
-	datptr = (struct strbuf __user *)A(arg2);
-	flgptr = (int __user *)A(arg3);
-
-	error = -EFAULT;
-
-	if (ctlptr) {
-		if (copy_from_user(&ctl,ctlptr,sizeof(struct strbuf)) || 
-		    put_user(-1,&ctlptr->len))
-			goto out;
-	} else
-		ctl.maxlen = -1;
-
-	if (datptr) {
-		if (copy_from_user(&dat,datptr,sizeof(struct strbuf)) || 
-		    put_user(-1,&datptr->len))
-			goto out;
-	} else
-		dat.maxlen = -1;
-
-	if (get_user(flags,flgptr))
-		goto out;
-
-	switch (flags) {
-	case 0:
-	case MSG_HIPRI:
-	case MSG_ANY:
-	case MSG_BAND:
-		break;
-	default:
-		error = -EINVAL;
-		goto out;
-	}
-
-	error = timod_getmsg(fd,A(ctl.buf),ctl.maxlen,&ctlptr->len,
-				A(dat.buf),dat.maxlen,&datptr->len,&flags);
-
-	if (!error && put_user(flags,flgptr))
-		error = -EFAULT;
-out:
-	unlock_kernel();
-	SOLD("done");
-	return error;
-}
-
-asmlinkage int solaris_putmsg(unsigned int fd, u32 arg1, u32 arg2, u32 arg3)
-{
-	struct file *filp;
-	struct inode *ino;
-	struct strbuf __user *ctlptr;
-	struct strbuf __user *datptr;
-	struct strbuf ctl, dat;
-	int flags = (int) arg3;
-	int error = -EBADF;
-	struct fdtable *fdt;
-
-	SOLD("entry");
-	lock_kernel();
-	if (fd >= sysctl_nr_open)
-		goto out;
-
-	fdt = files_fdtable(current->files);
-	filp = fdt->fd[fd];
-	if(!filp) goto out;
-
-	ino = filp->f_path.dentry->d_inode;
-	if (!ino) goto out;
-
-	if (!S_ISSOCK(ino->i_mode) &&
-		(imajor(ino) != 30 || iminor(ino) != 1))
-		goto out;
-
-	ctlptr = A(arg1);
-	datptr = A(arg2);
-
-	error = -EFAULT;
-
-	if (ctlptr) {
-		if (copy_from_user(&ctl,ctlptr,sizeof(ctl)))
-			goto out;
-		if (ctl.len < 0 && flags) {
-			error = -EINVAL;
-			goto out;
-		}
-	} else {
-		ctl.len = 0;
-		ctl.buf = 0;
-	}
-
-	if (datptr) {
-		if (copy_from_user(&dat,datptr,sizeof(dat)))
-			goto out;
-	} else {
-		dat.len = 0;
-		dat.buf = 0;
-	}
-
-	error = timod_putmsg(fd,A(ctl.buf),ctl.len,
-				A(dat.buf),dat.len,flags);
-out:
-	unlock_kernel();
-	SOLD("done");
-	return error;
-}
diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386
index 3cd8a04d66d8..e09edfa560da 100644
--- a/arch/um/Kconfig.i386
+++ b/arch/um/Kconfig.i386
@@ -19,10 +19,6 @@ config 64BIT
 	bool
 	default n
 
-config SEMAPHORE_SLEEPERS
-	bool
-	default y
-
 config 3_LEVEL_PGTABLES
 	bool "Three-level pagetables (EXPERIMENTAL)"
 	default n
diff --git a/arch/um/Kconfig.x86_64 b/arch/um/Kconfig.x86_64
index 6533b349f061..3fbe69e359ed 100644
--- a/arch/um/Kconfig.x86_64
+++ b/arch/um/Kconfig.x86_64
@@ -11,10 +11,6 @@ config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
 
-config SEMAPHORE_SLEEPERS
-	bool
-	default y
-
 config 3_LEVEL_PGTABLES
        bool
        default y
diff --git a/arch/um/drivers/net_kern.c b/arch/um/drivers/net_kern.c
index 1e8f41a99511..1d43bdfc20c4 100644
--- a/arch/um/drivers/net_kern.c
+++ b/arch/um/drivers/net_kern.c
@@ -256,11 +256,7 @@ static struct net_device_stats *uml_net_get_stats(struct net_device *dev)
 
 static void uml_net_set_multicast_list(struct net_device *dev)
 {
-	if (dev->flags & IFF_PROMISC)
-		return;
-	else if (dev->mc_count)
-		dev->flags |= IFF_ALLMULTI;
-	else dev->flags &= ~IFF_ALLMULTI;
+	return;
 }
 
 static void uml_net_tx_timeout(struct net_device *dev)
diff --git a/arch/um/sys-i386/ksyms.c b/arch/um/sys-i386/ksyms.c
index 2a1eac1859ce..bfbefd30db8f 100644
--- a/arch/um/sys-i386/ksyms.c
+++ b/arch/um/sys-i386/ksyms.c
@@ -1,17 +1,5 @@
 #include "linux/module.h"
-#include "linux/in6.h"
-#include "linux/rwsem.h"
-#include "asm/byteorder.h"
-#include "asm/delay.h"
-#include "asm/semaphore.h"
-#include "asm/uaccess.h"
 #include "asm/checksum.h"
-#include "asm/errno.h"
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
 
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-ppc/Makefile b/arch/um/sys-ppc/Makefile
index 08901526e893..b8bc844fd2c4 100644
--- a/arch/um/sys-ppc/Makefile
+++ b/arch/um/sys-ppc/Makefile
@@ -3,7 +3,7 @@ OBJ = built-in.o
 .S.o:
 	$(CC) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
 
-OBJS = ptrace.o sigcontext.o semaphore.o checksum.o miscthings.o misc.o \
+OBJS = ptrace.o sigcontext.o checksum.o miscthings.o misc.o \
 	ptrace_user.o sysrq.o
 
 EXTRA_AFLAGS := -DCONFIG_PPC32 -I. -I$(srctree)/arch/ppc/kernel
@@ -20,10 +20,6 @@ ptrace_user.o: ptrace_user.c
 sigcontext.o: sigcontext.c
 	$(CC) $(USER_CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<
 
-semaphore.c:
-	rm -f $@
-	ln -s $(srctree)/arch/ppc/kernel/$@ $@
-
 checksum.S:
 	rm -f $@
 	ln -s $(srctree)/arch/ppc/lib/$@ $@
@@ -66,4 +62,4 @@ misc.o: misc.S ppc_defs.h
 	$(CC) $(EXTRA_AFLAGS) $(KBUILD_AFLAGS) -D__ASSEMBLY__ -D__UM_PPC__ -c $< -o $*.o
 	rm -f asm
 
-clean-files := $(OBJS) ppc_defs.h checksum.S semaphore.c mk_defs.c
+clean-files := $(OBJS) ppc_defs.h checksum.S mk_defs.c
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 12c593607c59..4d7d1a812d8f 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -1,16 +1,5 @@
 #include "linux/module.h"
-#include "linux/in6.h"
-#include "linux/rwsem.h"
-#include "asm/byteorder.h"
-#include "asm/semaphore.h"
-#include "asm/uaccess.h"
-#include "asm/checksum.h"
-#include "asm/errno.h"
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
+#include "asm/string.h"
 
 /*XXX: we need them because they would be exported by x86_64 */
 EXPORT_SYMBOL(__memcpy);
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
index 3930482bddc4..da5889c53576 100644
--- a/arch/v850/kernel/Makefile
+++ b/arch/v850/kernel/Makefile
@@ -11,7 +11,7 @@
 
 extra-y := head.o init_task.o vmlinux.lds
 
-obj-y += intv.o entry.o process.o syscalls.o time.o semaphore.o setup.o \
+obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
 	 signal.o irq.o mach.o ptrace.o bug.o
 obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
 # chip-specific code
diff --git a/arch/v850/kernel/semaphore.c b/arch/v850/kernel/semaphore.c
deleted file mode 100644
index fc89fd661c99..000000000000
--- a/arch/v850/kernel/semaphore.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * arch/v850/kernel/semaphore.c -- Semaphore support
- *
- *  Copyright (C) 1998-2000  IBM Corporation
- *  Copyright (C) 1999  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file is a copy of the s390 version, arch/s390/kernel/semaphore.c
- *    Author(s): Martin Schwidefsky
- * which was derived from the i386 version, linux/arch/i386/kernel/semaphore.c
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-
-#include <asm/semaphore.h>
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to acquire the semaphore, while the "sleeping"
- * variable is a count of such acquires.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * "sleeping" and the contention routine ordering is
- * protected by the semaphore spinlock.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-/*
- * Logic:
- *  - only on a boundary condition do we need to care. When we go
- *    from a negative count to a non-negative, we wake people up.
- *  - when we go from a non-negative count to a negative do we
- *    (a) synchronize with the "sleeper" count and (b) make sure
- *    that we're on the wakeup list before we synchronize so that
- *    we cannot lose wakeup events.
- */
-
-void __up(struct semaphore *sem)
-{
-	wake_up(&sem->wait);
-}
-
-static DEFINE_SPINLOCK(semaphore_lock);
-
-void __sched __down(struct semaphore * sem)
-{
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	tsk->state = TASK_UNINTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	spin_lock_irq(&semaphore_lock);
-	sem->sleepers++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irq(&semaphore_lock);
-
-		schedule();
-		tsk->state = TASK_UNINTERRUPTIBLE;
-		spin_lock_irq(&semaphore_lock);
-	}
-	spin_unlock_irq(&semaphore_lock);
-	remove_wait_queue(&sem->wait, &wait);
-	tsk->state = TASK_RUNNING;
-	wake_up(&sem->wait);
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int retval = 0;
-	struct task_struct *tsk = current;
-	DECLARE_WAITQUEUE(wait, tsk);
-	tsk->state = TASK_INTERRUPTIBLE;
-	add_wait_queue_exclusive(&sem->wait, &wait);
-
-	spin_lock_irq(&semaphore_lock);
-	sem->sleepers ++;
-	for (;;) {
-		int sleepers = sem->sleepers;
-
-		/*
-		 * With signals pending, this turns into
-		 * the trylock failure case - we won't be
-		 * sleeping, and we* can't get the lock as
-		 * it has contention. Just correct the count
-		 * and exit.
-		 */
-		if (signal_pending(current)) {
-			retval = -EINTR;
-			sem->sleepers = 0;
-			atomic_add(sleepers, &sem->count);
-			break;
-		}
-
-		/*
-		 * Add "everybody else" into it. They aren't
-		 * playing, because we own the spinlock. The
-		 * "-1" is because we're still hoping to get
-		 * the lock.
-		 */
-		if (!atomic_add_negative(sleepers - 1, &sem->count)) {
-			sem->sleepers = 0;
-			break;
-		}
-		sem->sleepers = 1;	/* us - see -1 above */
-		spin_unlock_irq(&semaphore_lock);
-
-		schedule();
-		tsk->state = TASK_INTERRUPTIBLE;
-		spin_lock_irq(&semaphore_lock);
-	}
-	spin_unlock_irq(&semaphore_lock);
-	tsk->state = TASK_RUNNING;
-	remove_wait_queue(&sem->wait, &wait);
-	wake_up(&sem->wait);
-	return retval;
-}
-
-/*
- * Trylock failed - make sure we correct for
- * having decremented the count.
- */
-int __down_trylock(struct semaphore * sem)
-{
-        unsigned long flags;
-	int sleepers;
-
-	spin_lock_irqsave(&semaphore_lock, flags);
-	sleepers = sem->sleepers + 1;
-	sem->sleepers = 0;
-
-	/*
-	 * Add "everybody else" and us into it. They aren't
-	 * playing, because we own the spinlock.
-	 */
-	if (!atomic_add_negative(sleepers, &sem->count))
-		wake_up(&sem->wait);
-
-	spin_unlock_irqrestore(&semaphore_lock, flags);
-	return 1;
-}
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
index 0a4df4d6e05f..003db9c8c44a 100644
--- a/arch/v850/kernel/syscalls.c
+++ b/arch/v850/kernel/syscalls.c
@@ -30,7 +30,6 @@
 #include <linux/file.h>
 
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <asm/unistd.h>
 
 /*
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
index 93575fdc874d..8d386a5dbc4a 100644
--- a/arch/v850/kernel/v850_ksyms.c
+++ b/arch/v850/kernel/v850_ksyms.c
@@ -11,7 +11,6 @@
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
 #include <asm/io.h>
-#include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/current.h>
 
@@ -34,12 +33,6 @@ EXPORT_SYMBOL (memset);
 EXPORT_SYMBOL (memcpy);
 EXPORT_SYMBOL (memmove);
 
-/* semaphores */
-EXPORT_SYMBOL (__down);
-EXPORT_SYMBOL (__down_interruptible);
-EXPORT_SYMBOL (__down_trylock);
-EXPORT_SYMBOL (__up);
-
 /*
  * libgcc functions - functions that are used internally by the
  * compiler...  (prototypes are not correct though, but that
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4a88cf7695b4..87a693cf2bb7 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,7 +21,9 @@ config X86
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
-	select HAVE_KVM
+	select HAVE_KRETPROBES
+	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
+	select HAVE_ARCH_KGDB
 
 
 config GENERIC_LOCKBREAK
@@ -52,9 +54,6 @@ config STACKTRACE_SUPPORT
 config HAVE_LATENCYTOP_SUPPORT
 	def_bool y
 
-config SEMAPHORE_SLEEPERS
-	def_bool y
-
 config FAST_CMPXCHG_LOCAL
 	bool
 	default y
@@ -65,9 +64,6 @@ config MMU
 config ZONE_DMA
 	def_bool y
 
-config QUICKLIST
-	def_bool X86_32
-
 config SBUS
 	bool
 
@@ -119,7 +115,10 @@ config ARCH_HAS_CPU_RELAX
 	def_bool y
 
 config HAVE_SETUP_PER_CPU_AREA
-	def_bool X86_64
+	def_bool X86_64 || (X86_SMP && !X86_VOYAGER)
+
+config HAVE_CPUMASK_OF_CPU_MAP
+	def_bool X86_64_SMP
 
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
@@ -173,7 +172,7 @@ config X86_64_SMP
 config X86_HT
 	bool
 	depends on SMP
-	depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || (X86_64 && !MK8)
+	depends on (X86_32 && !(X86_VISWS || X86_VOYAGER)) || X86_64
 	default y
 
 config X86_BIOS_REBOOT
@@ -183,7 +182,7 @@ config X86_BIOS_REBOOT
 
 config X86_TRAMPOLINE
 	bool
-	depends on X86_SMP || (X86_VOYAGER && SMP)
+	depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
 	default y
 
 config KTIME_SCALAR
@@ -243,8 +242,7 @@ config X86_ELAN
 
 config X86_VOYAGER
 	bool "Voyager (NCR)"
-	depends on X86_32
-	select SMP if !BROKEN
+	depends on X86_32 && (SMP || BROKEN)
 	help
 	  Voyager is an MCA-based 32-way capable SMP architecture proprietary
 	  to NCR Corp.  Machine classes 345x/35xx/4100/51xx are Voyager-based.
@@ -256,9 +254,8 @@ config X86_VOYAGER
 
 config X86_NUMAQ
 	bool "NUMAQ (IBM/Sequent)"
-	select SMP
+	depends on SMP && X86_32
 	select NUMA
-	depends on X86_32
 	help
 	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
 	  multiquad box. This changes the way that processors are bootstrapped,
@@ -329,8 +326,9 @@ config X86_RDC321X
 
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
-	depends on X86_64 && PCI
-	 help
+	select PARAVIRT
+	depends on X86_64
+	help
 	  Support for ScaleMP vSMP systems.  Say 'Y' here if this kernel is
 	  supposed to run on these EM64T-based machines.  Only choose this option
 	  if you have one of these machines.
@@ -385,6 +383,35 @@ config PARAVIRT
 
 endif
 
+config MEMTEST_BOOTPARAM
+	bool "Memtest boot parameter"
+	depends on X86_64
+	default y
+	help
+	  This option adds a kernel parameter 'memtest', which allows memtest
+	  to be disabled at boot.  If this option is selected, memtest
+	  functionality can be disabled with memtest=0 on the kernel
+	  command line.  The purpose of this option is to allow a single
+	  kernel image to be distributed with memtest built in, but not
+	  necessarily enabled.
+
+	  If you are unsure how to answer this question, answer Y.
+
+config MEMTEST_BOOTPARAM_VALUE
+	int "Memtest boot parameter default value (0-4)"
+	depends on MEMTEST_BOOTPARAM
+	range 0 4
+	default 0
+	help
+	  This option sets the default value for the kernel parameter
+	  'memtest', which allows memtest to be disabled at boot.  If this
+	  option is set to 0 (zero), the memtest kernel parameter will
+	  default to 0, disabling memtest at bootup.  If this option is
+	  set to 4, the memtest kernel parameter will default to 4,
+	  enabling memtest at bootup, and use that as pattern number.
+
+	  If you are unsure how to answer this question, answer 0.
+
 config ACPI_SRAT
 	def_bool y
 	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
@@ -509,7 +536,7 @@ config NR_CPUS
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
-	depends on (X86_64 && SMP) || (X86_32 && X86_HT)
+	depends on X86_HT
 	help
 	  SMT scheduler support improves the CPU scheduler's decision making
 	  when dealing with Intel Pentium 4 chips with HyperThreading at a
@@ -519,7 +546,7 @@ config SCHED_SMT
 config SCHED_MC
 	def_bool y
 	prompt "Multi-core scheduler support"
-	depends on (X86_64 && SMP) || (X86_32 && X86_HT)
+	depends on X86_HT
 	help
 	  Multi-core scheduler support improves the CPU scheduler's decision
 	  making when dealing with multi-core CPU chips at a cost of slightly
@@ -879,6 +906,15 @@ config X86_64_ACPI_NUMA
 	help
 	  Enable ACPI SRAT based node topology detection.
 
+# Some NUMA nodes have memory ranges that span
+# other nodes.  Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node.  See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+	def_bool y
+	depends on X86_64_ACPI_NUMA
+
 config NUMA_EMU
 	bool "NUMA emulation"
 	depends on X86_64 && NUMA
@@ -888,7 +924,7 @@ config NUMA_EMU
 	  number of nodes. This is only useful for debugging.
 
 config NODES_SHIFT
-	int
+	int "Max num nodes shift(1-15)"
 	range 1 15  if X86_64
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
@@ -1012,6 +1048,21 @@ config MTRR
 
 	  See <file:Documentation/mtrr.txt> for more information.
 
+config X86_PAT
+	def_bool y
+	prompt "x86 PAT support"
+	depends on MTRR && NONPROMISC_DEVMEM
+	help
+	  Use PAT attributes to setup page level cache control.
+
+	  PATs are the modern equivalents of MTRRs and are much more
+	  flexible than MTRRs.
+
+	  Say N here if you see bootup problems (boot crash, boot hang,
+	  spontaneous reboots) or a non-working video driver.
+
+	  If unsure, say Y.
+
 config EFI
 	def_bool n
 	prompt "EFI runtime service support"
@@ -1080,6 +1131,7 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call"
+	depends on X86_64 || X86_BIOS_REBOOT
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -1261,7 +1313,7 @@ menuconfig APM
 	  machines with more than one CPU.
 
 	  In order to use APM, you will need supporting software. For location
-	  and more information, read <file:Documentation/pm.txt> and the
+	  and more information, read <file:Documentation/power/pm.txt> and the
 	  Battery Powered Linux mini-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.
 
@@ -1381,7 +1433,7 @@ endmenu
 menu "Bus options (PCI etc.)"
 
 config PCI
-	bool "PCI support" if !X86_VISWS
+	bool "PCI support" if !X86_VISWS && !X86_VSMP
 	depends on !X86_VOYAGER
 	default y
 	select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 6d50064db182..57072f2716f9 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -388,7 +388,7 @@ config X86_OOSTORE
 #
 config X86_P6_NOP
 	def_bool y
-	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || PENTIUM4)
+	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
 
 config X86_TSC
 	def_bool y
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 702eb39901ca..610aaecc19f8 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -54,6 +54,18 @@ config DEBUG_PER_CPU_MAPS
 
 	  Say N if unsure.
 
+config X86_PTDUMP
+	bool "Export kernel pagetable layout to userspace via debugfs"
+	depends on DEBUG_KERNEL
+	select DEBUG_FS
+	help
+	  Say Y here if you want to show the kernel pagetable layout in a
+	  debugfs file. This information is only useful for kernel developers
+	  who are working in architecture specific areas of the kernel.
+	  It is probably not a good idea to enable this feature in a production
+	  kernel.
+	  If in doubt, say "N"
+
 config DEBUG_RODATA
 	bool "Write protect kernel read-only data structures"
 	default y
@@ -64,6 +76,18 @@ config DEBUG_RODATA
 	  data. This is recommended so that we can catch kernel bugs sooner.
 	  If in doubt, say "Y".
 
+config DIRECT_GBPAGES
+	bool "Enable gbpages-mapped kernel pagetables"
+	depends on DEBUG_KERNEL && EXPERIMENTAL && X86_64
+	help
+	  Enable gigabyte pages support (if the CPU supports it). This can
+	  improve the kernel's performance a tiny bit by reducing TLB
+	  pressure.
+
+	  This is experimental code.
+
+	  If in doubt, say "N".
+
 config DEBUG_RODATA_TEST
 	bool "Testcase for the DEBUG_RODATA feature"
 	depends on DEBUG_RODATA
@@ -82,8 +106,8 @@ config DEBUG_NX_TEST
 
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	depends on DEBUG_KERNEL
 	depends on X86_32
+	default y
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f1e739a43d41..3cff3c894cf3 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -151,7 +151,6 @@ mflags-y += -Iinclude/asm-x86/mach-default
 # 64 bit does not support subarch support - clear sub arch variables
 fcore-$(CONFIG_X86_64)  :=
 mcore-$(CONFIG_X86_64)  :=
-mflags-$(CONFIG_X86_64) :=
 
 KBUILD_CFLAGS += $(mflags-y)
 KBUILD_AFLAGS += $(mflags-y)
@@ -159,9 +158,9 @@ KBUILD_AFLAGS += $(mflags-y)
 ###
 # Kernel objects
 
-head-y                := arch/x86/kernel/head_$(BITS).o
-head-$(CONFIG_X86_64) += arch/x86/kernel/head64.o
-head-y                += arch/x86/kernel/init_task.o
+head-y := arch/x86/kernel/head_$(BITS).o
+head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/init_task.o
 
 libs-y  += arch/x86/lib/
 
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index f88458e83ef0..7ee102f9c4f8 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -30,7 +30,7 @@ subdir-		:= compressed
 
 setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y		+= printf.o string.o tty.o video.o version.o
+setup-y		+= printf.o string.o tty.o video.o video-mode.o version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
 setup-$(CONFIG_X86_VOYAGER) += voyager.o
 
@@ -94,6 +94,20 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 
 SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
 
+sed-offsets := -e 's/^00*/0/' \
+        -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+
+quiet_cmd_offsets = OFFSETS $@
+      cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+
+$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,offsets)
+
+targets += offsets.h
+
+AFLAGS_header.o += -I$(obj)
+$(obj)/header.o: $(obj)/offsets.h
+
 LDFLAGS_setup.elf	:= -T
 $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
 	$(call if_changed,ld)
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index 31348d054fca..90943f83e84d 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/a20.c
- *
  * Enable A20 gate (return -1 on failure)
  */
 
diff --git a/arch/x86/boot/apm.c b/arch/x86/boot/apm.c
index c117c7fb859c..7aa6033001f9 100644
--- a/arch/x86/boot/apm.c
+++ b/arch/x86/boot/apm.c
@@ -12,8 +12,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/apm.c
- *
  * Get APM BIOS information
  */
 
diff --git a/arch/x86/boot/bitops.h b/arch/x86/boot/bitops.h
index 8dcc8dc7db88..878e4b9940d9 100644
--- a/arch/x86/boot/bitops.h
+++ b/arch/x86/boot/bitops.h
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/bitops.h
- *
  * Very simple bitops for the boot code.
  */
 
diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h
index 7822a4983da2..a34b9982c7cb 100644
--- a/arch/x86/boot/boot.h
+++ b/arch/x86/boot/boot.h
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/boot.h
- *
  * Header file for the real-mode kernel code
  */
 
@@ -286,6 +284,11 @@ int getchar_timeout(void);
 /* video.c */
 void set_video(void);
 
+/* video-mode.c */
+int set_mode(u16 mode);
+int mode_defined(u16 mode);
+void probe_cards(int unsafe);
+
 /* video-vesa.c */
 void vesa_store_edid(void);
 
diff --git a/arch/x86/boot/cmdline.c b/arch/x86/boot/cmdline.c
index 680408a0f463..a1d35634bce0 100644
--- a/arch/x86/boot/cmdline.c
+++ b/arch/x86/boot/cmdline.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/cmdline.c
- *
  * Simple command-line parser for early boot.
  */
 
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index d2b9f3bb87c0..92fdd35bd93e 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -22,7 +22,7 @@ $(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $
 	$(call if_changed,ld)
 	@:
 
-OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
+OBJCOPYFLAGS_vmlinux.bin :=  -R .comment -S
 $(obj)/vmlinux.bin: vmlinux FORCE
 	$(call if_changed,objcopy)
 
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 036e635f18a3..ba7736cf2ec7 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -130,7 +130,7 @@ relocated:
 /*
  * Setup the stack for the decompressor
  */
-	leal stack_end(%ebx), %esp
+	leal boot_stack_end(%ebx), %esp
 
 /*
  * Do the decompression, and jump to the new kernel..
@@ -142,8 +142,8 @@ relocated:
 	pushl %eax	# input_len
 	leal input_data(%ebx), %eax
 	pushl %eax	# input_data
-	leal _end(%ebx), %eax
-	pushl %eax	# end of the image as third argument
+	leal boot_heap(%ebx), %eax
+	pushl %eax	# heap area as third argument
 	pushl %esi	# real mode pointer as second arg
 	call decompress_kernel
 	addl $20, %esp
@@ -181,7 +181,10 @@ relocated:
 	jmp *%ebp
 
 .bss
+/* Stack and heap for uncompression */
 .balign 4
-stack:
-	.fill 4096, 1, 0
-stack_end:
+boot_heap:
+	.fill BOOT_HEAP_SIZE, 1, 0
+boot_stack:
+	.fill BOOT_STACK_SIZE, 1, 0
+boot_stack_end:
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index e8657b98c902..d8819efac81d 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -28,6 +28,7 @@
 #include <asm/segment.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
+#include <asm/boot.h>
 #include <asm/msr.h>
 #include <asm/asm-offsets.h>
 
@@ -62,7 +63,7 @@ startup_32:
 	subl	$1b, %ebp
 
 /* setup a stack and make sure cpu supports long mode. */
-	movl	$user_stack_end, %eax
+	movl	$boot_stack_end, %eax
 	addl	%ebp, %eax
 	movl	%eax, %esp
 
@@ -243,9 +244,9 @@ ENTRY(startup_64)
 /* Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	leaq	_end(%rip), %r8
-	leaq	_end(%rbx), %r9
-	movq	$_end /* - $startup_32 */, %rcx
+	leaq	_end_before_pgt(%rip), %r8
+	leaq	_end_before_pgt(%rbx), %r9
+	movq	$_end_before_pgt /* - $startup_32 */, %rcx
 1:	subq	$8, %r8
 	subq	$8, %r9
 	movq	0(%r8), %rax
@@ -267,14 +268,14 @@ relocated:
  */
 	xorq	%rax, %rax
 	leaq    _edata(%rbx), %rdi
-	leaq    _end(%rbx), %rcx
+	leaq    _end_before_pgt(%rbx), %rcx
 	subq	%rdi, %rcx
 	cld
 	rep
 	stosb
 
 	/* Setup the stack */
-	leaq	user_stack_end(%rip), %rsp
+	leaq	boot_stack_end(%rip), %rsp
 
 	/* zero EFLAGS after setting rsp */
 	pushq	$0
@@ -285,7 +286,7 @@ relocated:
  */
 	pushq	%rsi			# Save the real mode argument
 	movq	%rsi, %rdi		# real mode address
-	leaq	_heap(%rip), %rsi	# _heap
+	leaq	boot_heap(%rip), %rsi	# malloc area for uncompression
 	leaq	input_data(%rip), %rdx  # input_data
 	movl	input_len(%rip), %eax
 	movq	%rax, %rcx		# input_len
@@ -310,9 +311,12 @@ gdt:
 	.quad	0x0080890000000000	/* TS descriptor */
 	.quad   0x0000000000000000	/* TS continued */
 gdt_end:
-	.bss
-/* Stack for uncompression */
-	.balign 4
-user_stack:
-	.fill 4096,4,0
-user_stack_end:
+
+.bss
+/* Stack and heap for uncompression */
+.balign 4
+boot_heap:
+	.fill BOOT_HEAP_SIZE, 1, 0
+boot_stack:
+	.fill BOOT_STACK_SIZE, 1, 0
+boot_stack_end:
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 8182e32c1b42..90456cee47c3 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -15,6 +15,10 @@
  * we just keep it from happening
  */
 #undef CONFIG_PARAVIRT
+#ifdef CONFIG_X86_32
+#define _ASM_DESC_H_ 1
+#endif
+
 #ifdef CONFIG_X86_64
 #define _LINUX_STRING_H_ 1
 #define __LINUX_BITMAP_H 1
@@ -22,6 +26,7 @@
 
 #include <linux/linkage.h>
 #include <linux/screen_info.h>
+#include <linux/elf.h>
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/boot.h>
@@ -53,8 +58,8 @@
  * 1 bit (last block flag)
  * 2 bits (block type)
  *
- * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved.
- * The smallest block type encoding is always used.
+ * 1 block occurs every 32K -1 bytes or when there 50% compression
+ * has been achieved. The smallest block type encoding is always used.
  *
  * stored:
  *    32 bits length in bytes.
@@ -90,9 +95,9 @@
  *
  * All of which is enough to compute an amount of extra data that is required
  * to be safe.  To avoid problems at the block level allocating 5 extra bytes
- * per 32767 bytes of data is sufficient.  To avoind problems internal to a block
- * adding an extra 32767 bytes (the worst case uncompressed block size) is
- * sufficient, to ensure that in the worst case the decompressed data for
+ * per 32767 bytes of data is sufficient.  To avoind problems internal to a
+ * block adding an extra 32767 bytes (the worst case uncompressed block size)
+ * is sufficient, to ensure that in the worst case the decompressed data for
  * block will stop the byte before the compressed data for a block begins.
  * To avoid problems with the compressed data's meta information an extra 18
  * bytes are needed.  Leading to the formula:
@@ -111,58 +116,66 @@
  * gzip declarations
  */
 
-#define OF(args)  args
-#define STATIC static
+#define OF(args)	args
+#define STATIC		static
 
 #undef memset
 #undef memcpy
-#define memzero(s, n)     memset ((s), 0, (n))
+#define memzero(s, n)	memset((s), 0, (n))
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
+typedef unsigned char	uch;
+typedef unsigned short	ush;
+typedef unsigned long	ulg;
 
-#define WSIZE 0x80000000	/* Window size must be at least 32k,
-				 * and a power of two
-				 * We don't actually have a window just
-				 * a huge output buffer so I report
-				 * a 2G windows size, as that should
-				 * always be larger than our output buffer.
-				 */
+/*
+ * Window size must be at least 32k, and a power of two.
+ * We don't actually have a window just a huge output buffer,
+ * so we report a 2G window size, as that should always be
+ * larger than our output buffer:
+ */
+#define WSIZE		0x80000000
 
-static uch *inbuf;	/* input buffer */
-static uch *window;	/* Sliding window buffer, (and final output buffer) */
+/* Input buffer: */
+static unsigned char	*inbuf;
 
-static unsigned insize;  /* valid bytes in inbuf */
-static unsigned inptr;   /* index of next byte to be processed in inbuf */
-static unsigned outcnt;  /* bytes in output buffer */
+/* Sliding window buffer (and final output buffer): */
+static unsigned char	*window;
+
+/* Valid bytes in inbuf: */
+static unsigned		insize;
+
+/* Index of next byte to be processed in inbuf: */
+static unsigned		inptr;
+
+/* Bytes in output buffer: */
+static unsigned		outcnt;
 
 /* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-		
+#define ASCII_FLAG	0x01 /* bit 0 set: file probably ASCII text */
+#define CONTINUATION	0x02 /* bit 1 set: continuation of multi-part gz file */
+#define EXTRA_FIELD	0x04 /* bit 2 set: extra field present */
+#define ORIG_NAM	0x08 /* bit 3 set: original file name present */
+#define COMMENT		0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED	0x20 /* bit 5 set: file is encrypted */
+#define RESERVED	0xC0 /* bit 6, 7:  reserved */
+
+#define get_byte()	(inptr < insize ? inbuf[inptr++] : fill_inbuf())
+
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
-#  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Assert(cond, msg) do { if (!(cond)) error(msg); } while (0)
+#  define Trace(x)	do { fprintf x; } while (0)
+#  define Tracev(x)	do { if (verbose) fprintf x ; } while (0)
+#  define Tracevv(x)	do { if (verbose > 1) fprintf x ; } while (0)
+#  define Tracec(c, x)	do { if (verbose && (c)) fprintf x ; } while (0)
+#  define Tracecv(c, x)	do { if (verbose > 1 && (c)) fprintf x ; } while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
 static int  fill_inbuf(void);
@@ -170,7 +183,7 @@ static void flush_window(void);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
-  
+
 /*
  * This is set up by the setup-routine at boot-time
  */
@@ -185,7 +198,7 @@ static unsigned char *real_mode; /* Pointer to real-mode data */
 extern unsigned char input_data[];
 extern int input_len;
 
-static long bytes_out = 0;
+static long bytes_out;
 
 static void *malloc(int size);
 static void free(void *where);
@@ -204,13 +217,7 @@ static void putstr(const char *);
 static memptr free_mem_ptr;
 static memptr free_mem_end_ptr;
 
-#ifdef CONFIG_X86_64
-#define HEAP_SIZE             0x7000
-#else
-#define HEAP_SIZE             0x4000
-#endif
-
-static char *vidmem = (char *)0xb8000;
+static char *vidmem;
 static int vidport;
 static int lines, cols;
 
@@ -224,8 +231,10 @@ static void *malloc(int size)
 {
 	void *p;
 
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
+	if (size < 0)
+		error("Malloc error");
+	if (free_mem_ptr <= 0)
+		error("Memory error");
 
 	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
 
@@ -251,19 +260,19 @@ static void gzip_release(void **ptr)
 {
 	free_mem_ptr = (memptr) *ptr;
 }
- 
+
 static void scroll(void)
 {
 	int i;
 
-	memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
-	for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
+	memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
+	for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
 		vidmem[i] = ' ';
 }
 
 static void putstr(const char *s)
 {
-	int x,y,pos;
+	int x, y, pos;
 	char c;
 
 #ifdef CONFIG_X86_32
@@ -274,18 +283,18 @@ static void putstr(const char *s)
 	x = RM_SCREEN_INFO.orig_x;
 	y = RM_SCREEN_INFO.orig_y;
 
-	while ( ( c = *s++ ) != '\0' ) {
-		if ( c == '\n' ) {
+	while ((c = *s++) != '\0') {
+		if (c == '\n') {
 			x = 0;
-			if ( ++y >= lines ) {
+			if (++y >= lines) {
 				scroll();
 				y--;
 			}
 		} else {
 			vidmem [(x + cols * y) * 2] = c;
-			if ( ++x >= cols ) {
+			if (++x >= cols) {
 				x = 0;
-				if ( ++y >= lines ) {
+				if (++y >= lines) {
 					scroll();
 					y--;
 				}
@@ -303,22 +312,22 @@ static void putstr(const char *s)
 	outb(0xff & (pos >> 1), vidport+1);
 }
 
-static void* memset(void* s, int c, unsigned n)
+static void *memset(void *s, int c, unsigned n)
 {
 	int i;
 	char *ss = s;
 
-	for (i=0;i<n;i++) ss[i] = c;
+	for (i = 0; i < n; i++) ss[i] = c;
 	return s;
 }
 
-static void* memcpy(void* dest, const void* src, unsigned n)
+static void *memcpy(void *dest, const void *src, unsigned n)
 {
 	int i;
 	const char *s = src;
 	char *d = dest;
 
-	for (i=0;i<n;i++) d[i] = s[i];
+	for (i = 0; i < n; i++) d[i] = s[i];
 	return dest;
 }
 
@@ -341,9 +350,9 @@ static void flush_window(void)
 	/* With my window equal to my output buffer
 	 * I only need to compute the crc here.
 	 */
-	ulg c = crc;         /* temporary variable */
+	unsigned long c = crc;         /* temporary variable */
 	unsigned n;
-	uch *in, ch;
+	unsigned char *in, ch;
 
 	in = window;
 	for (n = 0; n < outcnt; n++) {
@@ -351,7 +360,7 @@ static void flush_window(void)
 		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
 	}
 	crc = c;
-	bytes_out += (ulg)outcnt;
+	bytes_out += (unsigned long)outcnt;
 	outcnt = 0;
 }
 
@@ -365,9 +374,59 @@ static void error(char *x)
 		asm("hlt");
 }
 
+static void parse_elf(void *output)
+{
+#ifdef CONFIG_X86_64
+	Elf64_Ehdr ehdr;
+	Elf64_Phdr *phdrs, *phdr;
+#else
+	Elf32_Ehdr ehdr;
+	Elf32_Phdr *phdrs, *phdr;
+#endif
+	void *dest;
+	int i;
+
+	memcpy(&ehdr, output, sizeof(ehdr));
+	if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
+	   ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
+	   ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
+	   ehdr.e_ident[EI_MAG3] != ELFMAG3) {
+		error("Kernel is not a valid ELF file");
+		return;
+	}
+
+	putstr("Parsing ELF... ");
+
+	phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
+	if (!phdrs)
+		error("Failed to allocate space for phdrs");
+
+	memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
+
+	for (i = 0; i < ehdr.e_phnum; i++) {
+		phdr = &phdrs[i];
+
+		switch (phdr->p_type) {
+		case PT_LOAD:
+#ifdef CONFIG_RELOCATABLE
+			dest = output;
+			dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
+#else
+			dest = (void *)(phdr->p_paddr);
+#endif
+			memcpy(dest,
+			       output + phdr->p_offset,
+			       phdr->p_filesz);
+			break;
+		default: /* Ignore other PT_* */ break;
+		}
+	}
+}
+
 asmlinkage void decompress_kernel(void *rmode, memptr heap,
-				  uch *input_data, unsigned long input_len,
-				  uch *output)
+				  unsigned char *input_data,
+				  unsigned long input_len,
+				  unsigned char *output)
 {
 	real_mode = rmode;
 
@@ -384,18 +443,18 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 
 	window = output;		/* Output buffer (Normally at 1M) */
 	free_mem_ptr     = heap;	/* Heap */
-	free_mem_end_ptr = heap + HEAP_SIZE;
+	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 	inbuf  = input_data;		/* Input buffer */
 	insize = input_len;
 	inptr  = 0;
 
 #ifdef CONFIG_X86_64
-	if ((ulg)output & (__KERNEL_ALIGN - 1))
+	if ((unsigned long)output & (__KERNEL_ALIGN - 1))
 		error("Destination address not 2M aligned");
-	if ((ulg)output >= 0xffffffffffUL)
+	if ((unsigned long)output >= 0xffffffffffUL)
 		error("Destination address too large");
 #else
-	if ((u32)output & (CONFIG_PHYSICAL_ALIGN -1))
+	if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
 		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
 	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
@@ -408,6 +467,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	makecrc();
 	putstr("\nDecompressing Linux... ");
 	gunzip();
+	parse_elf(output);
 	putstr("done.\nBooting the kernel.\n");
 	return;
 }
diff --git a/arch/x86/boot/compressed/vmlinux_64.lds b/arch/x86/boot/compressed/vmlinux_64.lds
index 7e5c7209f6cc..bef1ac891bce 100644
--- a/arch/x86/boot/compressed/vmlinux_64.lds
+++ b/arch/x86/boot/compressed/vmlinux_64.lds
@@ -39,10 +39,10 @@ SECTIONS
 		*(.bss.*)
 		*(COMMON)
 		. = ALIGN(8);
-		_end = . ;
+		_end_before_pgt = . ;
 		. = ALIGN(4096);
 		pgtable = . ;
 		. = . + 4096 * 6;
-		_heap = .;
+		_ebss = .;
 	}
 }
diff --git a/arch/x86/boot/copy.S b/arch/x86/boot/copy.S
index ef127e56a3cf..ef50c84e8b4b 100644
--- a/arch/x86/boot/copy.S
+++ b/arch/x86/boot/copy.S
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/copy.S
- *
  * Memory copy routines
  */
 
diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 769065bd23d7..7804389ee005 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/cpucheck.c
- *
  * Check for obligatory CPU features and abort if the features are not
  * present.  This code should be compilable as 16-, 32- or 64-bit
  * code, so be very careful with types and inline assembly.
@@ -56,27 +54,27 @@ static const u32 req_flags[NCAPINTS] =
 	REQUIRED_MASK7,
 };
 
-#define A32(a,b,c,d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
+#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
 
 static int is_amd(void)
 {
-	return cpu_vendor[0] == A32('A','u','t','h') &&
-	       cpu_vendor[1] == A32('e','n','t','i') &&
-	       cpu_vendor[2] == A32('c','A','M','D');
+	return cpu_vendor[0] == A32('A', 'u', 't', 'h') &&
+	       cpu_vendor[1] == A32('e', 'n', 't', 'i') &&
+	       cpu_vendor[2] == A32('c', 'A', 'M', 'D');
 }
 
 static int is_centaur(void)
 {
-	return cpu_vendor[0] == A32('C','e','n','t') &&
-	       cpu_vendor[1] == A32('a','u','r','H') &&
-	       cpu_vendor[2] == A32('a','u','l','s');
+	return cpu_vendor[0] == A32('C', 'e', 'n', 't') &&
+	       cpu_vendor[1] == A32('a', 'u', 'r', 'H') &&
+	       cpu_vendor[2] == A32('a', 'u', 'l', 's');
 }
 
 static int is_transmeta(void)
 {
-	return cpu_vendor[0] == A32('G','e','n','u') &&
-	       cpu_vendor[1] == A32('i','n','e','T') &&
-	       cpu_vendor[2] == A32('M','x','8','6');
+	return cpu_vendor[0] == A32('G', 'e', 'n', 'u') &&
+	       cpu_vendor[1] == A32('i', 'n', 'e', 'T') &&
+	       cpu_vendor[2] == A32('M', 'x', '8', '6');
 }
 
 static int has_fpu(void)
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index 8721dc46a0b6..d84a48ece785 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/edd.c
- *
  * Get EDD BIOS disk information
  */
 
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 64ad9016585a..6d2df8d61c54 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -22,6 +22,7 @@
 #include <asm/page.h>
 #include <asm/setup.h>
 #include "boot.h"
+#include "offsets.h"
 
 SETUPSECTS	= 4			/* default nr of setup-sectors */
 BOOTSEG		= 0x07C0		/* original address of boot-sector */
@@ -119,7 +120,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0207		# header version number (>= 0x0105)
+		.word	0x0208		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@@ -223,6 +224,9 @@ hardware_subarch:	.long 0			# subarchitecture, added with 2.07
 
 hardware_subarch_data:	.quad 0
 
+payload_offset:		.long input_data
+payload_length:		.long input_data_end-input_data
+
 # End of setup header #####################################################
 
 	.section ".inittext", "ax"
diff --git a/arch/x86/boot/install.sh b/arch/x86/boot/install.sh
index 88d77761d01b..8d60ee15dfd9 100644
--- a/arch/x86/boot/install.sh
+++ b/arch/x86/boot/install.sh
@@ -1,7 +1,5 @@
 #!/bin/sh
 #
-# arch/i386/boot/install.sh
-#
 # This file is subject to the terms and conditions of the GNU General Public
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c
index 7828da5cfd07..77569a4a3be1 100644
--- a/arch/x86/boot/main.c
+++ b/arch/x86/boot/main.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/main.c
- *
  * Main module for the real-mode kernel code
  */
 
diff --git a/arch/x86/boot/mca.c b/arch/x86/boot/mca.c
index 68222f2d4b67..911eaae5d696 100644
--- a/arch/x86/boot/mca.c
+++ b/arch/x86/boot/mca.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/mca.c
- *
  * Get the MCA system description table
  */
 
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index e77d89f9e8aa..acad32eb4290 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/memory.c
- *
  * Memory detection code
  */
 
diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c
index 1a0f936c160b..328956fdb59e 100644
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/pm.c
- *
  * Prepare the machine for transition to protected mode.
  */
 
@@ -100,7 +98,7 @@ static void reset_coprocessor(void)
 /*
  * Set up the GDT
  */
-#define GDT_ENTRY(flags,base,limit)		\
+#define GDT_ENTRY(flags, base, limit)		\
 	(((u64)(base & 0xff000000) << 32) |	\
 	 ((u64)flags << 40) |			\
 	 ((u64)(limit & 0x00ff0000) << 32) |	\
diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S
index f5402d51f7c3..ab049d40a884 100644
--- a/arch/x86/boot/pmjump.S
+++ b/arch/x86/boot/pmjump.S
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/pmjump.S
- *
  * The actual transition into protected mode
  */
 
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index 7e7e890699be..c1d00c0274c4 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/printf.c
- *
  * Oh, it's a waste of space, but oh-so-yummy for debugging.  This
  * version of printf() does not include 64-bit support.  "Live with
  * it."
diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c
index 481a22097781..f94b7a0c2abf 100644
--- a/arch/x86/boot/string.c
+++ b/arch/x86/boot/string.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/string.c
- *
  * Very basic string functions
  */
 
diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c
index b4248740ff0d..44dc1923c0e3 100644
--- a/arch/x86/boot/tools/build.c
+++ b/arch/x86/boot/tools/build.c
@@ -50,6 +50,75 @@ typedef unsigned long  u32;
 u8 buf[SETUP_SECT_MAX*512];
 int is_big_kernel;
 
+/*----------------------------------------------------------------------*/
+
+static const u32 crctab32[] = {
+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419,
+	0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4,
+	0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07,
+	0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856,
+	0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
+	0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4,
+	0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3,
+	0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a,
+	0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599,
+	0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190,
+	0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f,
+	0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e,
+	0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed,
+	0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
+	0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3,
+	0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a,
+	0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5,
+	0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010,
+	0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17,
+	0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6,
+	0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615,
+	0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344,
+	0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
+	0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a,
+	0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1,
+	0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c,
+	0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef,
+	0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe,
+	0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31,
+	0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c,
+	0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b,
+	0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
+	0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1,
+	0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278,
+	0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7,
+	0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66,
+	0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605,
+	0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8,
+	0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b,
+	0x2d02ef8d
+};
+
+static u32 partial_crc32_one(u8 c, u32 crc)
+{
+	return crctab32[(crc ^ c) & 0xff] ^ (crc >> 8);
+}
+
+static u32 partial_crc32(const u8 *s, int len, u32 crc)
+{
+	while (len--)
+		crc = partial_crc32_one(*s++, crc);
+	return crc;
+}
+
 static void die(const char * str, ...)
 {
 	va_list args;
@@ -74,6 +143,7 @@ int main(int argc, char ** argv)
 	FILE *file;
 	int fd;
 	void *kernel;
+	u32 crc = 0xffffffffUL;
 
 	if (argc > 2 && !strcmp(argv[1], "-b"))
 	  {
@@ -144,7 +214,8 @@ int main(int argc, char ** argv)
 	kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0);
 	if (kernel == MAP_FAILED)
 		die("Unable to mmap '%s': %m", argv[2]);
-	sys_size = (sz + 15) / 16;
+	/* Number of 16-byte paragraphs, including space for a 4-byte CRC */
+	sys_size = (sz + 15 + 4) / 16;
 	if (!is_big_kernel && sys_size > DEF_SYSSIZE)
 		die("System is too big. Try using bzImage or modules.");
 
@@ -155,12 +226,27 @@ int main(int argc, char ** argv)
 	buf[0x1f6] = sys_size >> 16;
 	buf[0x1f7] = sys_size >> 24;
 
+	crc = partial_crc32(buf, i, crc);
 	if (fwrite(buf, 1, i, stdout) != i)
 		die("Writing setup failed");
 
 	/* Copy the kernel code */
+	crc = partial_crc32(kernel, sz, crc);
 	if (fwrite(kernel, 1, sz, stdout) != sz)
 		die("Writing kernel failed");
+
+	/* Add padding leaving 4 bytes for the checksum */
+	while (sz++ < (sys_size*16) - 4) {
+		crc = partial_crc32_one('\0', crc);
+		if (fwrite("\0", 1, 1, stdout) != 1)
+			die("Writing padding failed");
+	}
+
+	/* Write the CRC */
+	fprintf(stderr, "CRC %lx\n", crc);
+	if (fwrite(&crc, 1, 4, stdout) != 4)
+		die("Writing CRC failed");
+
 	close(fd);
 
 	/* Everything is OK */
diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c
index f3f14bd26371..0be77b39328a 100644
--- a/arch/x86/boot/tty.c
+++ b/arch/x86/boot/tty.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/tty.c
- *
  * Very simple screen I/O
  * XXX: Probably should add very simple serial I/O?
  */
diff --git a/arch/x86/boot/version.c b/arch/x86/boot/version.c
index c61462f7d9a7..2723d9b5ce43 100644
--- a/arch/x86/boot/version.c
+++ b/arch/x86/boot/version.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/version.c
- *
  * Kernel version string
  */
 
diff --git a/arch/x86/boot/vesa.h b/arch/x86/boot/vesa.h
index ff5b73cd406f..468e444622c5 100644
--- a/arch/x86/boot/vesa.h
+++ b/arch/x86/boot/vesa.h
@@ -26,17 +26,10 @@ struct vesa_general_info {
 	far_ptr video_mode_ptr;	/* 14 */
 	u16 total_memory;	/* 18 */
 
-	u16 oem_software_rev;	/* 20 */
-	far_ptr oem_vendor_name_ptr;	/* 22 */
-	far_ptr oem_product_name_ptr;	/* 26 */
-	far_ptr oem_product_rev_ptr;	/* 30 */
-
-	u8 reserved[222];	/* 34 */
-	u8 oem_data[256];	/* 256 */
+	u8 reserved[236];	/* 20 */
 } __attribute__ ((packed));
 
 #define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24))
-#define VBE2_MAGIC ('V' + ('B' << 8) + ('E' << 16) + ('2' << 24))
 
 struct vesa_mode_info {
 	u16 mode_attr;		/* 0 */
diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c
index ff664a117096..49f26aaaebc8 100644
--- a/arch/x86/boot/video-bios.c
+++ b/arch/x86/boot/video-bios.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/video-bios.c
- *
  * Standard video BIOS modes
  *
  * We have two options for this; silent and scanned.
@@ -50,6 +48,7 @@ static int set_bios_mode(u8 mode)
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
 
+#ifndef _WAKEUP
 	if (new_mode != boot_params.screen_info.orig_video_mode) {
 		/* Mode setting failed, but we didn't end up where we
 		   started.  That's bad.  Try to revert to the original
@@ -59,13 +58,18 @@ static int set_bios_mode(u8 mode)
 			     : "+a" (ax)
 			     : : "ebx", "ecx", "edx", "esi", "edi");
 	}
+#endif
 	return -1;
 }
 
 static int bios_probe(void)
 {
 	u8 mode;
+#ifdef _WAKEUP
+	u8 saved_mode = 0x03;
+#else
 	u8 saved_mode = boot_params.screen_info.orig_video_mode;
+#endif
 	u16 crtc;
 	struct mode_info *mi;
 	int nmodes = 0;
diff --git a/arch/x86/boot/video-mode.c b/arch/x86/boot/video-mode.c
new file mode 100644
index 000000000000..748e8d06290a
--- /dev/null
+++ b/arch/x86/boot/video-mode.c
@@ -0,0 +1,173 @@
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ *   Copyright (C) 1991, 1992 Linus Torvalds
+ *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video-mode.c
+ *
+ * Set the video mode.  This is separated out into a different
+ * file in order to be shared with the ACPI wakeup code.
+ */
+
+#include "boot.h"
+#include "video.h"
+#include "vesa.h"
+
+/*
+ * Common variables
+ */
+int adapter;			/* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */
+u16 video_segment;
+int force_x, force_y;	/* Don't query the BIOS for cols/rows */
+
+int do_restore;		/* Screen contents changed during mode flip */
+int graphic_mode;	/* Graphic mode with linear frame buffer */
+
+/* Probe the video drivers and have them generate their mode lists. */
+void probe_cards(int unsafe)
+{
+	struct card_info *card;
+	static u8 probed[2];
+
+	if (probed[unsafe])
+		return;
+
+	probed[unsafe] = 1;
+
+	for (card = video_cards; card < video_cards_end; card++) {
+		if (card->unsafe == unsafe) {
+			if (card->probe)
+				card->nmodes = card->probe();
+			else
+				card->nmodes = 0;
+		}
+	}
+}
+
+/* Test if a mode is defined */
+int mode_defined(u16 mode)
+{
+	struct card_info *card;
+	struct mode_info *mi;
+	int i;
+
+	for (card = video_cards; card < video_cards_end; card++) {
+		mi = card->modes;
+		for (i = 0; i < card->nmodes; i++, mi++) {
+			if (mi->mode == mode)
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
+/* Set mode (without recalc) */
+static int raw_set_mode(u16 mode, u16 *real_mode)
+{
+	int nmode, i;
+	struct card_info *card;
+	struct mode_info *mi;
+
+	/* Drop the recalc bit if set */
+	mode &= ~VIDEO_RECALC;
+
+	/* Scan for mode based on fixed ID, position, or resolution */
+	nmode = 0;
+	for (card = video_cards; card < video_cards_end; card++) {
+		mi = card->modes;
+		for (i = 0; i < card->nmodes; i++, mi++) {
+			int visible = mi->x || mi->y;
+
+			if ((mode == nmode && visible) ||
+			    mode == mi->mode ||
+			    mode == (mi->y << 8)+mi->x) {
+				*real_mode = mi->mode;
+				return card->set_mode(mi);
+			}
+
+			if (visible)
+				nmode++;
+		}
+	}
+
+	/* Nothing found?  Is it an "exceptional" (unprobed) mode? */
+	for (card = video_cards; card < video_cards_end; card++) {
+		if (mode >= card->xmode_first &&
+		    mode < card->xmode_first+card->xmode_n) {
+			struct mode_info mix;
+			*real_mode = mix.mode = mode;
+			mix.x = mix.y = 0;
+			return card->set_mode(&mix);
+		}
+	}
+
+	/* Otherwise, failure... */
+	return -1;
+}
+
+/*
+ * Recalculate the vertical video cutoff (hack!)
+ */
+static void vga_recalc_vertical(void)
+{
+	unsigned int font_size, rows;
+	u16 crtc;
+	u8 pt, ov;
+
+	set_fs(0);
+	font_size = rdfs8(0x485); /* BIOS: font size (pixels) */
+	rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */
+
+	rows *= font_size;	/* Visible scan lines */
+	rows--;			/* ... minus one */
+
+	crtc = vga_crtc();
+
+	pt = in_idx(crtc, 0x11);
+	pt &= ~0x80;		/* Unlock CR0-7 */
+	out_idx(pt, crtc, 0x11);
+
+	out_idx((u8)rows, crtc, 0x12); /* Lower height register */
+
+	ov = in_idx(crtc, 0x07); /* Overflow register */
+	ov &= 0xbd;
+	ov |= (rows >> (8-1)) & 0x02;
+	ov |= (rows >> (9-6)) & 0x40;
+	out_idx(ov, crtc, 0x07);
+}
+
+/* Set mode (with recalc if specified) */
+int set_mode(u16 mode)
+{
+	int rv;
+	u16 real_mode;
+
+	/* Very special mode numbers... */
+	if (mode == VIDEO_CURRENT_MODE)
+		return 0;	/* Nothing to do... */
+	else if (mode == NORMAL_VGA)
+		mode = VIDEO_80x25;
+	else if (mode == EXTENDED_VGA)
+		mode = VIDEO_8POINT;
+
+	rv = raw_set_mode(mode, &real_mode);
+	if (rv)
+		return rv;
+
+	if (mode & VIDEO_RECALC)
+		vga_recalc_vertical();
+
+	/* Save the canonical mode number for the kernel, not
+	   an alias, size specification or menu position */
+#ifndef _WAKEUP
+	boot_params.hdr.vid_mode = real_mode;
+#endif
+	return 0;
+}
diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 662dd2f13068..401ad998ad08 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/video-vesa.c
- *
  * VESA text modes
  */
 
@@ -24,7 +22,11 @@ static struct vesa_mode_info vminfo;
 
 __videocard video_vesa;
 
+#ifndef _WAKEUP
 static void vesa_store_mode_params_graphics(void);
+#else /* _WAKEUP */
+static inline void vesa_store_mode_params_graphics(void) {}
+#endif /* _WAKEUP */
 
 static int vesa_probe(void)
 {
@@ -37,8 +39,6 @@ static int vesa_probe(void)
 
 	video_vesa.modes = GET_HEAP(struct mode_info, 0);
 
-	vginfo.signature = VBE2_MAGIC;
-
 	ax = 0x4f00;
 	di = (size_t)&vginfo;
 	asm(INT10
@@ -167,6 +167,8 @@ static int vesa_set_mode(struct mode_info *mode)
 }
 
 
+#ifndef _WAKEUP
+
 /* Switch DAC to 8-bit mode */
 static void vesa_dac_set_8bits(void)
 {
@@ -290,6 +292,8 @@ void vesa_store_edid(void)
 #endif /* CONFIG_FIRMWARE_EDID */
 }
 
+#endif /* not _WAKEUP */
+
 __videocard video_vesa =
 {
 	.card_name	= "VESA",
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 7259387b7d19..40ecb8d7688c 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/video-vga.c
- *
  * Common all-VGA modes
  */
 
@@ -210,6 +208,8 @@ static int vga_set_mode(struct mode_info *mode)
  */
 static int vga_probe(void)
 {
+	u16 ega_bx;
+
 	static const char *card_name[] = {
 		"CGA/MDA/HGC", "EGA", "VGA"
 	};
@@ -226,12 +226,16 @@ static int vga_probe(void)
 	u8 vga_flag;
 
 	asm(INT10
-	    : "=b" (boot_params.screen_info.orig_video_ega_bx)
+	    : "=b" (ega_bx)
 	    : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
 	    : "ecx", "edx", "esi", "edi");
 
+#ifndef _WAKEUP
+	boot_params.screen_info.orig_video_ega_bx = ega_bx;
+#endif
+
 	/* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
-	if ((u8)boot_params.screen_info.orig_video_ega_bx != 0x10) {
+	if ((u8)ega_bx != 0x10) {
 		/* EGA/VGA */
 		asm(INT10
 		    : "=a" (vga_flag)
@@ -240,7 +244,9 @@ static int vga_probe(void)
 
 		if (vga_flag == 0x1a) {
 			adapter = ADAPTER_VGA;
+#ifndef _WAKEUP
 			boot_params.screen_info.orig_video_isVGA = 1;
+#endif
 		} else {
 			adapter = ADAPTER_EGA;
 		}
diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c
index 696d08f3843c..83598b23093a 100644
--- a/arch/x86/boot/video.c
+++ b/arch/x86/boot/video.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/video.c
- *
  * Select video mode
  */
 
@@ -18,21 +16,6 @@
 #include "video.h"
 #include "vesa.h"
 
-/*
- * Mode list variables
- */
-static struct card_info cards[];    /* List of cards to probe for */
-
-/*
- * Common variables
- */
-int adapter;			/* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */
-u16 video_segment;
-int force_x, force_y;	/* Don't query the BIOS for cols/rows */
-
-int do_restore = 0;	/* Screen contents changed during mode flip */
-int graphic_mode;	/* Graphic mode with linear frame buffer */
-
 static void store_cursor_position(void)
 {
 	u16 curpos;
@@ -107,147 +90,6 @@ static void store_mode_params(void)
 	boot_params.screen_info.orig_video_lines = y;
 }
 
-/* Probe the video drivers and have them generate their mode lists. */
-static void probe_cards(int unsafe)
-{
-	struct card_info *card;
-	static u8 probed[2];
-
-	if (probed[unsafe])
-		return;
-
-	probed[unsafe] = 1;
-
-	for (card = video_cards; card < video_cards_end; card++) {
-		if (card->unsafe == unsafe) {
-			if (card->probe)
-				card->nmodes = card->probe();
-			else
-				card->nmodes = 0;
-		}
-	}
-}
-
-/* Test if a mode is defined */
-int mode_defined(u16 mode)
-{
-	struct card_info *card;
-	struct mode_info *mi;
-	int i;
-
-	for (card = video_cards; card < video_cards_end; card++) {
-		mi = card->modes;
-		for (i = 0; i < card->nmodes; i++, mi++) {
-			if (mi->mode == mode)
-				return 1;
-		}
-	}
-
-	return 0;
-}
-
-/* Set mode (without recalc) */
-static int raw_set_mode(u16 mode, u16 *real_mode)
-{
-	int nmode, i;
-	struct card_info *card;
-	struct mode_info *mi;
-
-	/* Drop the recalc bit if set */
-	mode &= ~VIDEO_RECALC;
-
-	/* Scan for mode based on fixed ID, position, or resolution */
-	nmode = 0;
-	for (card = video_cards; card < video_cards_end; card++) {
-		mi = card->modes;
-		for (i = 0; i < card->nmodes; i++, mi++) {
-			int visible = mi->x || mi->y;
-
-			if ((mode == nmode && visible) ||
-			    mode == mi->mode ||
-			    mode == (mi->y << 8)+mi->x) {
-				*real_mode = mi->mode;
-				return card->set_mode(mi);
-			}
-
-			if (visible)
-				nmode++;
-		}
-	}
-
-	/* Nothing found?  Is it an "exceptional" (unprobed) mode? */
-	for (card = video_cards; card < video_cards_end; card++) {
-		if (mode >= card->xmode_first &&
-		    mode < card->xmode_first+card->xmode_n) {
-			struct mode_info mix;
-			*real_mode = mix.mode = mode;
-			mix.x = mix.y = 0;
-			return card->set_mode(&mix);
-		}
-	}
-
-	/* Otherwise, failure... */
-	return -1;
-}
-
-/*
- * Recalculate the vertical video cutoff (hack!)
- */
-static void vga_recalc_vertical(void)
-{
-	unsigned int font_size, rows;
-	u16 crtc;
-	u8 pt, ov;
-
-	set_fs(0);
-	font_size = rdfs8(0x485); /* BIOS: font size (pixels) */
-	rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */
-
-	rows *= font_size;	/* Visible scan lines */
-	rows--;			/* ... minus one */
-
-	crtc = vga_crtc();
-
-	pt = in_idx(crtc, 0x11);
-	pt &= ~0x80;		/* Unlock CR0-7 */
-	out_idx(pt, crtc, 0x11);
-
-	out_idx((u8)rows, crtc, 0x12); /* Lower height register */
-
-	ov = in_idx(crtc, 0x07); /* Overflow register */
-	ov &= 0xbd;
-	ov |= (rows >> (8-1)) & 0x02;
-	ov |= (rows >> (9-6)) & 0x40;
-	out_idx(ov, crtc, 0x07);
-}
-
-/* Set mode (with recalc if specified) */
-static int set_mode(u16 mode)
-{
-	int rv;
-	u16 real_mode;
-
-	/* Very special mode numbers... */
-	if (mode == VIDEO_CURRENT_MODE)
-		return 0;	/* Nothing to do... */
-	else if (mode == NORMAL_VGA)
-		mode = VIDEO_80x25;
-	else if (mode == EXTENDED_VGA)
-		mode = VIDEO_8POINT;
-
-	rv = raw_set_mode(mode, &real_mode);
-	if (rv)
-		return rv;
-
-	if (mode & VIDEO_RECALC)
-		vga_recalc_vertical();
-
-	/* Save the canonical mode number for the kernel, not
-	   an alias, size specification or menu position */
-	boot_params.hdr.vid_mode = real_mode;
-	return 0;
-}
-
 static unsigned int get_entry(void)
 {
 	char entry_buf[4];
@@ -486,6 +328,7 @@ void set_video(void)
 		printf("Undefined video mode number: %x\n", mode);
 		mode = ASK_VGA;
 	}
+	boot_params.hdr.vid_mode = mode;
 	vesa_store_edid();
 	store_mode_params();
 
diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h
index d69347f79e8e..ee63f5d14461 100644
--- a/arch/x86/boot/video.h
+++ b/arch/x86/boot/video.h
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/video.h
- *
  * Header file for the real-mode video probing code
  */
 
diff --git a/arch/x86/boot/voyager.c b/arch/x86/boot/voyager.c
index 6499e3239b41..433909d61e5c 100644
--- a/arch/x86/boot/voyager.c
+++ b/arch/x86/boot/voyager.c
@@ -9,8 +9,6 @@
  * ----------------------------------------------------------------------- */
 
 /*
- * arch/i386/boot/voyager.c
- *
  * Get the Voyager config information
  */
 
diff --git a/arch/x86/crypto/aes-i586-asm_32.S b/arch/x86/crypto/aes-i586-asm_32.S
index 1093bede3e0a..e41b147f4509 100644
--- a/arch/x86/crypto/aes-i586-asm_32.S
+++ b/arch/x86/crypto/aes-i586-asm_32.S
@@ -289,7 +289,6 @@ aes_enc_blk:
 	pop     %ebx
 	mov     %r0,(%ebp)
 	pop     %ebp
-	mov     $1,%eax
 	ret
 
 // AES (Rijndael) Decryption Subroutine
@@ -365,6 +364,4 @@ aes_dec_blk:
 	pop     %ebx
 	mov     %r0,(%ebp)
 	pop     %ebp
-	mov     $1,%eax
 	ret
-
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index 1c0503bdfb1a..05e155d3fb6c 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -468,7 +468,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 		restorer = ka->sa.sa_restorer;
 	} else {
 		/* Return stub is in 32bit vsyscall page */
-		if (current->binfmt->hasvdso)
+		if (current->mm->context.vdso)
 			restorer = VDSO32_SYMBOL(current->mm->context.vdso,
 						 sigreturn);
 		else
@@ -500,7 +500,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
 	regs->ss = __USER32_DS;
 
 	set_fs(USER_DS);
-	regs->flags &= ~X86_EFLAGS_TF;
+	regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 
@@ -600,7 +600,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->ss = __USER32_DS;
 
 	set_fs(USER_DS);
-	regs->flags &= ~X86_EFLAGS_TF;
+	regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 8022d3c695c0..ae7158bce4d6 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -162,12 +162,14 @@ sysenter_tracesys:
 	SAVE_REST
 	CLEAR_RREGS
 	movq	%r9,R9(%rsp)
-	movq	$-ENOSYS,RAX(%rsp)	/* really needed? */
+	movq	$-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
 	movq	%rsp,%rdi        /* &pt_regs -> arg1 */
 	call	syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
 	xchgl	%ebp,%r9d
+	cmpl	$(IA32_NR_syscalls-1),%eax
+	ja	int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
 	jmp	sysenter_do_call
 	CFI_ENDPROC
 ENDPROC(ia32_sysenter_target)
@@ -261,13 +263,15 @@ cstar_tracesys:
 	SAVE_REST
 	CLEAR_RREGS
 	movq %r9,R9(%rsp)
-	movq $-ENOSYS,RAX(%rsp)	/* really needed? */
+	movq $-ENOSYS,RAX(%rsp)	/* ptrace can change this for a bad syscall */
 	movq %rsp,%rdi        /* &pt_regs -> arg1 */
 	call syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
 	xchgl %ebp,%r9d
 	movl RSP-ARGOFFSET(%rsp), %r8d
+	cmpl $(IA32_NR_syscalls-1),%eax
+	ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
 	jmp cstar_do_call
 END(ia32_cstar_target)
 				
@@ -325,7 +329,7 @@ ENTRY(ia32_syscall)
 	jnz ia32_tracesys
 ia32_do_syscall:	
 	cmpl $(IA32_NR_syscalls-1),%eax
-	ja  ia32_badsys
+	ja  int_ret_from_sys_call	/* ia32_tracesys has set RAX(%rsp) */
 	IA32_ARG_FIXUP
 	call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
 ia32_sysret:
@@ -335,7 +339,7 @@ ia32_sysret:
 ia32_tracesys:			 
 	SAVE_REST
 	CLEAR_RREGS
-	movq $-ENOSYS,RAX(%rsp)	/* really needed? */
+	movq $-ENOSYS,RAX(%rsp)	/* ptrace can change this for a bad syscall */
 	movq %rsp,%rdi        /* &pt_regs -> arg1 */
 	call syscall_trace_enter
 	LOAD_ARGS32 ARGOFFSET  /* reload args from stack in case ptrace changed it */
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index abf71d26fc2a..f00afdf61e67 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -26,51 +26,26 @@
 #include <linux/file.h>
 #include <linux/signal.h>
 #include <linux/syscalls.h>
-#include <linux/resource.h>
 #include <linux/times.h>
 #include <linux/utsname.h>
-#include <linux/smp.h>
 #include <linux/smp_lock.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
 #include <linux/mm.h>
-#include <linux/shm.h>
-#include <linux/slab.h>
 #include <linux/uio.h>
-#include <linux/nfs_fs.h>
-#include <linux/quota.h>
-#include <linux/module.h>
-#include <linux/sunrpc/svc.h>
-#include <linux/nfsd/nfsd.h>
-#include <linux/nfsd/cache.h>
-#include <linux/nfsd/xdr.h>
-#include <linux/nfsd/syscall.h>
 #include <linux/poll.h>
 #include <linux/personality.h>
 #include <linux/stat.h>
-#include <linux/ipc.h>
 #include <linux/rwsem.h>
-#include <linux/binfmts.h>
-#include <linux/init.h>
-#include <linux/aio_abi.h>
-#include <linux/aio.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
 #include <linux/ptrace.h>
 #include <linux/highuid.h>
-#include <linux/vmalloc.h>
-#include <linux/fsnotify.h>
 #include <linux/sysctl.h>
 #include <asm/mman.h>
 #include <asm/types.h>
 #include <asm/uaccess.h>
-#include <asm/semaphore.h>
 #include <asm/atomic.h>
-#include <asm/ldt.h>
-
-#include <net/scm.h>
-#include <net/sock.h>
 #include <asm/ia32.h>
+#include <asm/vgtod.h>
 
 #define AA(__x)		((unsigned long)(__x))
 
@@ -804,11 +779,6 @@ asmlinkage long sys32_execve(char __user *name, compat_uptr_t __user *argv,
 	if (IS_ERR(filename))
 		return error;
 	error = compat_do_execve(filename, argv, envp, regs);
-	if (error == 0) {
-		task_lock(current);
-		current->ptrace &= ~PT_DTRACE;
-		task_unlock(current);
-	}
 	putname(filename);
 	return error;
 }
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 4eb5ce841106..90e092d0af0c 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,8 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y                := head_$(BITS).o init_task.o vmlinux.lds
-extra-$(CONFIG_X86_64) += head64.o
+extra-y                := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
 
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
@@ -19,16 +18,18 @@ CFLAGS_tsc_64.o		:= $(nostackp)
 obj-y			:= process_$(BITS).o signal_$(BITS).o entry_$(BITS).o
 obj-y			+= traps_$(BITS).o irq_$(BITS).o
 obj-y			+= time_$(BITS).o ioport.o ldt.o
-obj-y			+= setup_$(BITS).o i8259_$(BITS).o
+obj-y			+= setup_$(BITS).o i8259_$(BITS).o setup.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o setup64.o
-obj-y			+= pci-dma_$(BITS).o  bootflag.o e820_$(BITS).o
-obj-y			+= quirks.o i8237.o topology.o kdebugfs.o
-obj-y			+= alternative.o i8253.o
-obj-$(CONFIG_X86_64)	+= pci-nommu_64.o bugs_64.o
+obj-y			+= bootflag.o e820_$(BITS).o
+obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
+obj-y			+= alternative.o i8253.o pci-nommu.o
+obj-$(CONFIG_X86_64)	+= bugs_64.o
 obj-y			+= tsc_$(BITS).o io_delay.o rtc.o
 
+obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline.o
+obj-y				+= process.o
 obj-y				+= i387.o
 obj-y				+= ptrace.o
 obj-y				+= ds.o
@@ -47,11 +48,12 @@ obj-$(CONFIG_MICROCODE)		+= microcode.o
 obj-$(CONFIG_PCI)		+= early-quirks.o
 apm-y				:= apm_32.o
 obj-$(CONFIG_APM)		+= apm.o
-obj-$(CONFIG_X86_SMP)		+= smp_$(BITS).o smpboot_$(BITS).o tsc_sync.o
-obj-$(CONFIG_X86_32_SMP)	+= smpcommon_32.o
-obj-$(CONFIG_X86_64_SMP)	+= smp_64.o smpboot_64.o tsc_sync.o
+obj-$(CONFIG_X86_SMP)		+= smp.o
+obj-$(CONFIG_X86_SMP)		+= smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o
+obj-$(CONFIG_X86_32_SMP)	+= smpcommon.o
+obj-$(CONFIG_X86_64_SMP)	+= tsc_sync.o smpcommon.o
 obj-$(CONFIG_X86_TRAMPOLINE)	+= trampoline_$(BITS).o
-obj-$(CONFIG_X86_MPPARSE)	+= mpparse_$(BITS).o
+obj-$(CONFIG_X86_MPPARSE)	+= mpparse.o
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic_$(BITS).o nmi_$(BITS).o
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic_$(BITS).o
 obj-$(CONFIG_X86_REBOOTFIXUPS)	+= reboot_fixups_32.o
@@ -60,12 +62,13 @@ obj-$(CONFIG_KEXEC)		+= relocate_kernel_$(BITS).o crash.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
-obj-$(CONFIG_X86_VSMP)		+= vsmp_64.o
+obj-y				+= vsmp_64.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 obj-$(CONFIG_MODULES)		+= module_$(BITS).o
 obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
 obj-$(CONFIG_EFI) 		+= efi.o efi_$(BITS).o efi_stub_$(BITS).o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
@@ -89,7 +92,7 @@ scx200-y			+= scx200_32.o
 ###
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
-        obj-y				+= genapic_64.o genapic_flat_64.o
+        obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 19d3d6e9d09b..7335959b6aff 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,7 +1,14 @@
+subdir-				:= realmode
+
 obj-$(CONFIG_ACPI)		+= boot.o
-obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_rm.o wakeup_$(BITS).o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o processor.o
 endif
 
+$(obj)/wakeup_rm.o:    $(obj)/realmode/wakeup.bin
+
+$(obj)/realmode/wakeup.bin: FORCE
+	$(Q)$(MAKE) $(build)=$(obj)/realmode $@
+
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2cdc9de9371d..057ccf1d5ad4 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -39,6 +39,11 @@
 #include <asm/apic.h>
 #include <asm/io.h>
 #include <asm/mpspec.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_X86_LOCAL_APIC
+# include <mach_apic.h>
+#endif
 
 static int __initdata acpi_force = 0;
 
@@ -52,9 +57,7 @@ EXPORT_SYMBOL(acpi_disabled);
 #ifdef	CONFIG_X86_64
 
 #include <asm/proto.h>
-
-static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
-
+#include <asm/genapic.h>
 
 #else				/* X86 */
 
@@ -111,7 +114,7 @@ char *__init __acpi_map_table(unsigned long phys_addr, unsigned long size)
 	if (!phys_addr || !size)
 		return NULL;
 
-	if (phys_addr+size <= (end_pfn_map << PAGE_SHIFT) + PAGE_SIZE)
+	if (phys_addr+size <= (max_pfn_mapped << PAGE_SHIFT) + PAGE_SIZE)
 		return __va(phys_addr);
 
 	return NULL;
@@ -237,6 +240,16 @@ static int __init acpi_parse_madt(struct acpi_table_header *table)
 	return 0;
 }
 
+static void __cpuinit acpi_register_lapic(int id, u8 enabled)
+{
+	if (!enabled) {
+		++disabled_cpus;
+		return;
+	}
+
+	generic_processor_info(id, 0);
+}
+
 static int __init
 acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -256,8 +269,26 @@ acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
 	 * to not preallocating memory for all NR_CPUS
 	 * when we use CPU hotplug.
 	 */
-	mp_register_lapic(processor->id,	/* APIC ID */
-			  processor->lapic_flags & ACPI_MADT_ENABLED);	/* Enabled? */
+	acpi_register_lapic(processor->id,	/* APIC ID */
+			    processor->lapic_flags & ACPI_MADT_ENABLED);
+
+	return 0;
+}
+
+static int __init
+acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
+{
+	struct acpi_madt_local_sapic *processor = NULL;
+
+	processor = (struct acpi_madt_local_sapic *)header;
+
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+	acpi_table_print_madt_entry(header);
+
+	acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
+			    processor->lapic_flags & ACPI_MADT_ENABLED);
 
 	return 0;
 }
@@ -300,6 +331,8 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
 
 #ifdef CONFIG_X86_IO_APIC
 
+struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
+
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -532,7 +565,7 @@ static int __cpuinit _acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	buffer.pointer = NULL;
 
 	tmp_map = cpu_present_map;
-	mp_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
+	acpi_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
 
 	/*
 	 * If mp_register_lapic successfully generates a new logical cpu
@@ -732,6 +765,16 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
  * Parse LAPIC entries in MADT
  * returns 0 on success, < 0 on error
  */
+
+static void __init acpi_register_lapic_address(unsigned long address)
+{
+	mp_lapic_addr = address;
+
+	set_fixmap_nocache(FIX_APIC_BASE, address);
+	if (boot_cpu_physical_apicid == -1U)
+		boot_cpu_physical_apicid  = GET_APIC_ID(read_apic_id());
+}
+
 static int __init acpi_parse_madt_lapic_entries(void)
 {
 	int count;
@@ -753,10 +796,14 @@ static int __init acpi_parse_madt_lapic_entries(void)
 		return count;
 	}
 
-	mp_register_lapic_address(acpi_lapic_addr);
+	acpi_register_lapic_address(acpi_lapic_addr);
+
+	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
+				      acpi_parse_sapic, MAX_APICS);
 
-	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic,
-				      MAX_APICS);
+	if (!count)
+		count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
+					      acpi_parse_lapic, MAX_APICS);
 	if (!count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
 		/* TBD: Cleanup to allow fallback to MPS */
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 8ca3557a6d59..c2502eb9aa83 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -1,6 +1,4 @@
 /*
- * arch/i386/kernel/acpi/cstate.c
- *
  * Copyright (C) 2005 Intel Corporation
  * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  * 	- Added _PDC for SMP C-states on Intel CPUs
@@ -93,7 +91,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 
 	/* Make sure we are running on right CPU */
 	saved_mask = current->cpus_allowed;
-	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (retval)
 		return -1;
 
@@ -130,7 +128,7 @@ int acpi_processor_ffh_cstate_probe(unsigned int cpu,
 		 cx->address);
 
 out:
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return retval;
 }
 EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe);
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index 324eb0cab19c..de2d2e4ebad9 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -1,6 +1,4 @@
 /*
- * arch/i386/kernel/acpi/processor.c
- *
  * Copyright (C) 2005 Intel Corporation
  * 	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
  * 	- Added _PDC for platforms with Intel CPUs
diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile
new file mode 100644
index 000000000000..092900854acc
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/Makefile
@@ -0,0 +1,57 @@
+#
+# arch/x86/kernel/acpi/realmode/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+targets		:= wakeup.bin wakeup.elf
+
+wakeup-y	+= wakeup.o wakemain.o video-mode.o copy.o
+
+# The link order of the video-*.o modules can matter.  In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+wakeup-y	+= video-vga.o
+wakeup-y	+= video-vesa.o
+wakeup-y	+= video-bios.o
+
+targets		+= $(wakeup-y)
+
+bootsrc		:= $(src)/../../../boot
+
+# ---------------------------------------------------------------------------
+
+# How to compile the 16-bit code.  Note we always compile for -march=i386,
+# that way we can complain to the user if the CPU is insufficient.
+# Compile with _SETUP since this is similar to the boot-time setup code.
+KBUILD_CFLAGS	:= $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \
+		   -I$(srctree)/$(bootsrc) \
+		   $(cflags-y) \
+		   -Wall -Wstrict-prototypes \
+		   -march=i386 -mregparm=3 \
+		   -include $(srctree)/$(bootsrc)/code16gcc.h \
+		   -fno-strict-aliasing -fomit-frame-pointer \
+		   $(call cc-option, -ffreestanding) \
+		   $(call cc-option, -fno-toplevel-reorder,\
+			$(call cc-option, -fno-unit-at-a-time)) \
+		   $(call cc-option, -fno-stack-protector) \
+		   $(call cc-option, -mpreferred-stack-boundary=2)
+KBUILD_CFLAGS	+= $(call cc-option, -m32)
+KBUILD_AFLAGS	:= $(KBUILD_CFLAGS) -D__ASSEMBLY__
+
+WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y))
+
+LDFLAGS_wakeup.elf	:= -T
+
+CPPFLAGS_wakeup.lds += -P -C
+
+$(obj)/wakeup.elf: $(src)/wakeup.lds $(WAKEUP_OBJS) FORCE
+	$(call if_changed,ld)
+
+OBJCOPYFLAGS_wakeup.bin	:= -O binary
+
+$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE
+	$(call if_changed,objcopy)
diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S
new file mode 100644
index 000000000000..dc59ebee69d8
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/copy.S
@@ -0,0 +1 @@
+#include "../../../boot/copy.S"
diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c
new file mode 100644
index 000000000000..7deabc144a27
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-bios.c
@@ -0,0 +1 @@
+#include "../../../boot/video-bios.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c
new file mode 100644
index 000000000000..328ad209f113
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-mode.c
@@ -0,0 +1 @@
+#include "../../../boot/video-mode.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c
new file mode 100644
index 000000000000..9dbb9672226a
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-vesa.c
@@ -0,0 +1 @@
+#include "../../../boot/video-vesa.c"
diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c
new file mode 100644
index 000000000000..bcc81255f374
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/video-vga.c
@@ -0,0 +1 @@
+#include "../../../boot/video-vga.c"
diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c
new file mode 100644
index 000000000000..883962d9eef2
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakemain.c
@@ -0,0 +1,81 @@
+#include "wakeup.h"
+#include "boot.h"
+
+static void udelay(int loops)
+{
+	while (loops--)
+		io_delay();	/* Approximately 1 us */
+}
+
+static void beep(unsigned int hz)
+{
+	u8 enable;
+
+	if (!hz) {
+		enable = 0x00;		/* Turn off speaker */
+	} else {
+		u16 div = 1193181/hz;
+
+		outb(0xb6, 0x43);	/* Ctr 2, squarewave, load, binary */
+		io_delay();
+		outb(div, 0x42);	/* LSB of counter */
+		io_delay();
+		outb(div >> 8, 0x42);	/* MSB of counter */
+		io_delay();
+
+		enable = 0x03;		/* Turn on speaker */
+	}
+	inb(0x61);		/* Dummy read of System Control Port B */
+	io_delay();
+	outb(enable, 0x61);	/* Enable timer 2 output to speaker */
+	io_delay();
+}
+
+#define DOT_HZ		880
+#define DASH_HZ		587
+#define US_PER_DOT	125000
+
+/* Okay, this is totally silly, but it's kind of fun. */
+static void send_morse(const char *pattern)
+{
+	char s;
+
+	while ((s = *pattern++)) {
+		switch (s) {
+		case '.':
+			beep(DOT_HZ);
+			udelay(US_PER_DOT);
+			beep(0);
+			udelay(US_PER_DOT);
+			break;
+		case '-':
+			beep(DASH_HZ);
+			udelay(US_PER_DOT * 3);
+			beep(0);
+			udelay(US_PER_DOT);
+			break;
+		default:	/* Assume it's a space */
+			udelay(US_PER_DOT * 3);
+			break;
+		}
+	}
+}
+
+void main(void)
+{
+	/* Kill machine if structures are wrong */
+	if (wakeup_header.real_magic != 0x12345678)
+		while (1);
+
+	if (wakeup_header.realmode_flags & 4)
+		send_morse("...-");
+
+	if (wakeup_header.realmode_flags & 1)
+		asm volatile("lcallw   $0xc000,$3");
+
+	if (wakeup_header.realmode_flags & 2) {
+		/* Need to call BIOS */
+		probe_cards(0);
+		set_mode(wakeup_header.video_mode);
+	}
+}
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S
new file mode 100644
index 000000000000..f9b77fb37e5b
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakeup.S
@@ -0,0 +1,113 @@
+/*
+ * ACPI wakeup real mode startup stub
+ */
+#include <asm/segment.h>
+#include <asm/msr-index.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+	.code16
+	.section ".header", "a"
+
+/* This should match the structure in wakeup.h */
+		.globl	wakeup_header
+wakeup_header:
+video_mode:	.short	0	/* Video mode number */
+pmode_return:	.byte	0x66, 0xea	/* ljmpl */
+		.long	0	/* offset goes here */
+		.short	__KERNEL_CS
+pmode_cr0:	.long	0	/* Saved %cr0 */
+pmode_cr3:	.long	0	/* Saved %cr3 */
+pmode_cr4:	.long	0	/* Saved %cr4 */
+pmode_efer:	.quad	0	/* Saved EFER */
+pmode_gdt:	.quad	0
+realmode_flags:	.long	0
+real_magic:	.long	0
+trampoline_segment:	.word 0
+signature:	.long	0x51ee1111
+
+	.text
+	.globl	_start
+	.code16
+wakeup_code:
+_start:
+	cli
+	cld
+
+	/* Set up segments */
+	movw	%cs, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+	movw	%ax, %ss
+
+	movl	$wakeup_stack_end, %esp
+
+	/* Clear the EFLAGS */
+	pushl	$0
+	popfl
+
+	/* Check header signature... */
+	movl	signature, %eax
+	cmpl	$0x51ee1111, %eax
+	jne	bogus_real_magic
+
+	/* Check we really have everything... */
+	movl	end_signature, %eax
+	cmpl	$0x65a22c82, %eax
+	jne	bogus_real_magic
+
+	/* Call the C code */
+	calll	main
+
+	/* Do any other stuff... */
+
+#ifndef CONFIG_64BIT
+	/* This could also be done in C code... */
+	movl	pmode_cr3, %eax
+	movl	%eax, %cr3
+
+	movl	pmode_cr4, %ecx
+	jecxz	1f
+	movl	%ecx, %cr4
+1:
+	movl	pmode_efer, %eax
+	movl	pmode_efer + 4, %edx
+	movl	%eax, %ecx
+	orl	%edx, %ecx
+	jz	1f
+	movl	$0xc0000080, %ecx
+	wrmsr
+1:
+
+	lgdtl	pmode_gdt
+
+	/* This really couldn't... */
+	movl	pmode_cr0, %eax
+	movl	%eax, %cr0
+	jmp	pmode_return
+#else
+	pushw	$0
+	pushw	trampoline_segment
+	pushw	$0
+	lret
+#endif
+
+bogus_real_magic:
+1:
+	hlt
+	jmp	1b
+
+	.data
+	.balign	4
+	.globl	HEAP, heap_end
+HEAP:
+	.long	wakeup_heap
+heap_end:
+	.long	wakeup_stack
+
+	.bss
+wakeup_heap:
+	.space	2048
+wakeup_stack:
+	.space	2048
+wakeup_stack_end:
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h
new file mode 100644
index 000000000000..ef8166fe8020
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakeup.h
@@ -0,0 +1,36 @@
+/*
+ * Definitions for the wakeup data structure at the head of the
+ * wakeup code.
+ */
+
+#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H
+#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+/* This must match data at wakeup.S */
+struct wakeup_header {
+	u16 video_mode;		/* Video mode number */
+	u16 _jmp1;		/* ljmpl opcode, 32-bit only */
+	u32 pmode_entry;	/* Protected mode resume point, 32-bit only */
+	u16 _jmp2;		/* CS value, 32-bit only */
+	u32 pmode_cr0;		/* Protected mode cr0 */
+	u32 pmode_cr3;		/* Protected mode cr3 */
+	u32 pmode_cr4;		/* Protected mode cr4 */
+	u32 pmode_efer_low;	/* Protected mode EFER */
+	u32 pmode_efer_high;
+	u64 pmode_gdt;
+	u32 realmode_flags;
+	u32 real_magic;
+	u16 trampoline_segment;	/* segment with trampoline code, 64-bit only */
+	u32 signature;		/* To check we have correct structure */
+} __attribute__((__packed__));
+
+extern struct wakeup_header wakeup_header;
+#endif
+
+#define HEADER_OFFSET 0x3f00
+#define WAKEUP_SIZE   0x4000
+
+#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
new file mode 100644
index 000000000000..22fab6c4be15
--- /dev/null
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -0,0 +1,61 @@
+/*
+ * wakeup.ld
+ *
+ * Linker script for the real-mode wakeup code
+ */
+#undef i386
+#include "wakeup.h"
+
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+	. = HEADER_OFFSET;
+	.header : {
+		 *(.header)
+	}
+
+	. = 0;
+	.text : {
+		 *(.text*)
+	}
+
+	. = ALIGN(16);
+	.rodata : {
+		*(.rodata*)
+	}
+
+	.videocards : {
+		video_cards = .;
+		*(.videocards)
+		video_cards_end = .;
+	}
+
+	. = ALIGN(16);
+	.data : {
+		 *(.data*)
+	}
+
+	.signature : {
+		end_signature = .;
+		LONG(0x65a22c82)
+	}
+
+	. = ALIGN(16);
+	.bss :	{
+		__bss_start = .;
+		*(.bss)
+		__bss_end = .;
+	}
+
+	. = ALIGN(16);
+	_end = .;
+
+	/DISCARD/ : {
+		*(.note*)
+	}
+
+	. = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
+}
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 6bc815cd8cb3..afc25ee9964b 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -10,30 +10,72 @@
 #include <linux/dmi.h>
 #include <linux/cpumask.h>
 
-#include <asm/smp.h>
+#include "realmode/wakeup.h"
+#include "sleep.h"
 
-/* address in low memory of the wakeup routine. */
-unsigned long acpi_wakeup_address = 0;
+unsigned long acpi_wakeup_address;
 unsigned long acpi_realmode_flags;
-extern char wakeup_start, wakeup_end;
 
-extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+/* address in low memory of the wakeup routine. */
+static unsigned long acpi_realmode;
+
+#ifdef CONFIG_64BIT
+static char temp_stack[10240];
+#endif
 
 /**
  * acpi_save_state_mem - save kernel state
  *
  * Create an identity mapped page table and copy the wakeup routine to
  * low memory.
+ *
+ * Note that this is too late to change acpi_wakeup_address.
  */
 int acpi_save_state_mem(void)
 {
-	if (!acpi_wakeup_address) {
-		printk(KERN_ERR "Could not allocate memory during boot, S3 disabled\n");
+	struct wakeup_header *header;
+
+	if (!acpi_realmode) {
+		printk(KERN_ERR "Could not allocate memory during boot, "
+		       "S3 disabled\n");
 		return -ENOMEM;
 	}
-	memcpy((void *)acpi_wakeup_address, &wakeup_start,
-	       &wakeup_end - &wakeup_start);
-	acpi_copy_wakeup_routine(acpi_wakeup_address);
+	memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE);
+
+	header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET);
+	if (header->signature != 0x51ee1111) {
+		printk(KERN_ERR "wakeup header does not match\n");
+		return -EINVAL;
+	}
+
+	header->video_mode = saved_video_mode;
+
+#ifndef CONFIG_64BIT
+	store_gdt((struct desc_ptr *)&header->pmode_gdt);
+
+	header->pmode_efer_low = nx_enabled;
+	if (header->pmode_efer_low & 1) {
+		/* This is strange, why not save efer, always? */
+		rdmsr(MSR_EFER, header->pmode_efer_low,
+			header->pmode_efer_high);
+	}
+#endif /* !CONFIG_64BIT */
+
+	header->pmode_cr0 = read_cr0();
+	header->pmode_cr4 = read_cr4();
+	header->realmode_flags = acpi_realmode_flags;
+	header->real_magic = 0x12345678;
+
+#ifndef CONFIG_64BIT
+	header->pmode_entry = (u32)&wakeup_pmode_return;
+	header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET);
+	saved_magic = 0x12345678;
+#else /* CONFIG_64BIT */
+	header->trampoline_segment = setup_trampoline() >> 4;
+	init_rsp = (unsigned long)temp_stack + 4096;
+	initial_code = (unsigned long)wakeup_long64;
+	saved_magic = 0x123456789abcdef0;
+#endif /* CONFIG_64BIT */
 
 	return 0;
 }
@@ -56,15 +98,20 @@ void acpi_restore_state_mem(void)
  */
 void __init acpi_reserve_bootmem(void)
 {
-	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE*2) {
+	if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) {
 		printk(KERN_ERR
 		       "ACPI: Wakeup code way too big, S3 disabled.\n");
 		return;
 	}
 
-	acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2);
-	if (!acpi_wakeup_address)
+	acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE);
+
+	if (!acpi_realmode) {
 		printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n");
+		return;
+	}
+
+	acpi_wakeup_address = acpi_realmode;
 }
 
 
diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h
new file mode 100644
index 000000000000..adbcbaa6f1df
--- /dev/null
+++ b/arch/x86/kernel/acpi/sleep.h
@@ -0,0 +1,16 @@
+/*
+ *	Variables and functions used by the code in sleep.c
+ */
+
+#include <asm/trampoline.h>
+
+extern char wakeup_code_start, wakeup_code_end;
+
+extern unsigned long saved_video_mode;
+extern long saved_magic;
+
+extern int wakeup_pmode_return;
+extern char swsusp_pg_dir[PAGE_SIZE];
+
+extern unsigned long acpi_copy_wakeup_routine(unsigned long);
+extern void wakeup_long64(void);
diff --git a/arch/x86/kernel/acpi/sleep_32.c b/arch/x86/kernel/acpi/sleep_32.c
deleted file mode 100644
index 63fe5525e026..000000000000
--- a/arch/x86/kernel/acpi/sleep_32.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * sleep.c - x86-specific ACPI sleep support.
- *
- *  Copyright (C) 2001-2003 Patrick Mochel
- *  Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz>
- */
-
-#include <linux/acpi.h>
-#include <linux/bootmem.h>
-#include <linux/dmi.h>
-#include <linux/cpumask.h>
-
-#include <asm/smp.h>
-
-/* Ouch, we want to delete this. We already have better version in userspace, in
-   s2ram from suspend.sf.net project */
-static __init int reset_videomode_after_s3(const struct dmi_system_id *d)
-{
-	acpi_realmode_flags |= 2;
-	return 0;
-}
-
-static __initdata struct dmi_system_id acpisleep_dmi_table[] = {
-	{			/* Reset video mode after returning from ACPI S3 sleep */
-	 .callback = reset_videomode_after_s3,
-	 .ident = "Toshiba Satellite 4030cdt",
-	 .matches = {
-		     DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
-		     },
-	 },
-	{}
-};
-
-static int __init acpisleep_dmi_init(void)
-{
-	dmi_check_system(acpisleep_dmi_table);
-	return 0;
-}
-
-core_initcall(acpisleep_dmi_init);
diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S
index f53e3277f8e5..a12e6a9fb659 100644
--- a/arch/x86/kernel/acpi/wakeup_32.S
+++ b/arch/x86/kernel/acpi/wakeup_32.S
@@ -3,178 +3,12 @@
 #include <asm/segment.h>
 #include <asm/page.h>
 
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls. 
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
-	inb	$97, %al; 	\
-	outb	%al, $0x80; 	\
-	movb	$3, %al; 	\
-	outb	%al, $97; 	\
-	outb	%al, $0x80; 	\
-	movb	$-74, %al; 	\
-	outb	%al, $67; 	\
-	outb	%al, $0x80; 	\
-	movb	$-119, %al; 	\
-	outb	%al, $66; 	\
-	outb	%al, $0x80; 	\
-	movb	$15, %al; 	\
-	outb	%al, $66;
-
-ALIGN
-	.align	4096
-ENTRY(wakeup_start)
-wakeup_code:
-	wakeup_code_start = .
-	.code16
-
-	cli
-	cld
-
-	# setup data segment
-	movw	%cs, %ax
-	movw	%ax, %ds					# Make ds:0 point to wakeup_start
-	movw	%ax, %ss
-
-	testl   $4, realmode_flags - wakeup_code
-	jz      1f
-	BEEP
-1:
-	mov	$(wakeup_stack - wakeup_code), %sp		# Private stack is needed for ASUS board
-
-	pushl	$0						# Kill any dangerous flags
-	popfl
-
-	movl	real_magic - wakeup_code, %eax
-	cmpl	$0x12345678, %eax
-	jne	bogus_real_magic
-
-	testl	$1, realmode_flags - wakeup_code
-	jz	1f
-	lcall   $0xc000,$3
-	movw	%cs, %ax
-	movw	%ax, %ds					# Bios might have played with that
-	movw	%ax, %ss
-1:
-
-	testl	$2, realmode_flags - wakeup_code
-	jz	1f
-	mov	video_mode - wakeup_code, %ax
-	call	mode_set
-1:
-
-	# set up page table
-	movl	$swsusp_pg_dir-__PAGE_OFFSET, %eax
-	movl	%eax, %cr3
-
-	testl	$1, real_efer_save_restore - wakeup_code
-	jz	4f
-	# restore efer setting
-	movl	real_save_efer_edx - wakeup_code, %edx
-	movl	real_save_efer_eax - wakeup_code, %eax
-	mov     $0xc0000080, %ecx
-	wrmsr
-4:
-	# make sure %cr4 is set correctly (features, etc)
-	movl	real_save_cr4 - wakeup_code, %eax
-	movl	%eax, %cr4
-	
-	# need a gdt -- use lgdtl to force 32-bit operands, in case
-	# the GDT is located past 16 megabytes.
-	lgdtl	real_save_gdt - wakeup_code
-
-	movl	real_save_cr0 - wakeup_code, %eax
-	movl	%eax, %cr0
-	jmp 1f
-1:
-	movl	real_magic - wakeup_code, %eax
-	cmpl	$0x12345678, %eax
-	jne	bogus_real_magic
-
-	testl   $8, realmode_flags - wakeup_code
-	jz      1f
-	BEEP
-1:
-	ljmpl	$__KERNEL_CS, $wakeup_pmode_return
-
-real_save_gdt:	.word 0
-		.long 0
-real_save_cr0:	.long 0
-real_save_cr3:	.long 0
-real_save_cr4:	.long 0
-real_magic:	.long 0
-video_mode:	.long 0
-realmode_flags:	.long 0
-real_efer_save_restore:	.long 0
-real_save_efer_edx: 	.long 0
-real_save_efer_eax: 	.long 0
-
-bogus_real_magic:
-	jmp bogus_real_magic
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- *	NORMAL_VGA (-1)
- *	EXTENDED_VGA (-2)
- *	ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff).  To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-mode_set:
-	movw	%ax, %bx
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	cmpb	$2, %bh
-	jb	check_vesa
-
-setbad:
-	clc
-	ret
-
-check_vesa:
-	orw	$0x4000, %bx			# Use linear frame buffer
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	setbad				# AH=0 if OK
-
-	stc
-	ret
+# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
 
 	.code32
 	ALIGN
 
-.org	0x800
-wakeup_stack_begin:	# Stack grows down
-
-.org	0xff0		# Just below end of page
-wakeup_stack:
-ENTRY(wakeup_end)
-	
-.org	0x1000
-
+ENTRY(wakeup_pmode_return)
 wakeup_pmode_return:
 	movw	$__KERNEL_DS, %ax
 	movw	%ax, %ss
@@ -187,7 +21,7 @@ wakeup_pmode_return:
 	lgdt	saved_gdt
 	lidt	saved_idt
 	lldt	saved_ldt
-	ljmp	$(__KERNEL_CS),$1f
+	ljmp	$(__KERNEL_CS), $1f
 1:
 	movl	%cr3, %eax
 	movl	%eax, %cr3
@@ -201,82 +35,41 @@ wakeup_pmode_return:
 	jne	bogus_magic
 
 	# jump to place where we left off
-	movl	saved_eip,%eax
+	movl	saved_eip, %eax
 	jmp	*%eax
 
 bogus_magic:
 	jmp	bogus_magic
 
 
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %eax:	place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
-ENTRY(acpi_copy_wakeup_routine)
 
-	pushl	%ebx
+save_registers:
 	sgdt	saved_gdt
 	sidt	saved_idt
 	sldt	saved_ldt
 	str	saved_tss
 
-	movl	nx_enabled, %edx
-	movl	%edx, real_efer_save_restore - wakeup_start (%eax)
-	testl	$1, real_efer_save_restore - wakeup_start (%eax)
-	jz	2f
-	# save efer setting
-	pushl	%eax
-	movl	%eax, %ebx
-	mov     $0xc0000080, %ecx
-	rdmsr
-	movl	%edx, real_save_efer_edx - wakeup_start (%ebx)
-	movl	%eax, real_save_efer_eax - wakeup_start (%ebx)
-	popl	%eax
-2:
-
-	movl    %cr3, %edx
-	movl    %edx, real_save_cr3 - wakeup_start (%eax)
-	movl    %cr4, %edx
-	movl    %edx, real_save_cr4 - wakeup_start (%eax)
-	movl	%cr0, %edx
-	movl	%edx, real_save_cr0 - wakeup_start (%eax)
-	sgdt    real_save_gdt - wakeup_start (%eax)
-
-	movl	saved_videomode, %edx
-	movl	%edx, video_mode - wakeup_start (%eax)
-	movl	acpi_realmode_flags, %edx
-	movl	%edx, realmode_flags - wakeup_start (%eax)
-	movl	$0x12345678, real_magic - wakeup_start (%eax)
-	movl	$0x12345678, saved_magic
-	popl	%ebx
-	ret
-
-save_registers:
 	leal	4(%esp), %eax
 	movl	%eax, saved_context_esp
-	movl %ebx, saved_context_ebx
-	movl %ebp, saved_context_ebp
-	movl %esi, saved_context_esi
-	movl %edi, saved_context_edi
-	pushfl ; popl saved_context_eflags
-
-	movl $ret_point, saved_eip
+	movl	%ebx, saved_context_ebx
+	movl	%ebp, saved_context_ebp
+	movl	%esi, saved_context_esi
+	movl	%edi, saved_context_edi
+	pushfl
+	popl	saved_context_eflags
+
+	movl	$ret_point, saved_eip
 	ret
 
 
 restore_registers:
-	movl saved_context_ebp, %ebp
-	movl saved_context_ebx, %ebx
-	movl saved_context_esi, %esi
-	movl saved_context_edi, %edi
-	pushl saved_context_eflags ; popfl
-	ret	
+	movl	saved_context_ebp, %ebp
+	movl	saved_context_ebx, %ebx
+	movl	saved_context_esi, %esi
+	movl	saved_context_edi, %edi
+	pushl	saved_context_eflags
+	popfl
+	ret
 
 ENTRY(do_suspend_lowlevel)
 	call	save_processor_state
diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S
index 2e1b9e0d0767..bcc293423a70 100644
--- a/arch/x86/kernel/acpi/wakeup_64.S
+++ b/arch/x86/kernel/acpi/wakeup_64.S
@@ -7,191 +7,18 @@
 #include <asm/asm-offsets.h>
 
 # Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2
-#
-# wakeup_code runs in real mode, and at unknown address (determined at run-time).
-# Therefore it must only use relative jumps/calls. 
-#
-# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
-#
-# If physical address of wakeup_code is 0x12345, BIOS should call us with
-# cs = 0x1234, eip = 0x05
-#
-
-#define BEEP \
-	inb	$97, %al; 	\
-	outb	%al, $0x80; 	\
-	movb	$3, %al; 	\
-	outb	%al, $97; 	\
-	outb	%al, $0x80; 	\
-	movb	$-74, %al; 	\
-	outb	%al, $67; 	\
-	outb	%al, $0x80; 	\
-	movb	$-119, %al; 	\
-	outb	%al, $66; 	\
-	outb	%al, $0x80; 	\
-	movb	$15, %al; 	\
-	outb	%al, $66;
-
-
-ALIGN
-	.align	16
-ENTRY(wakeup_start)
-wakeup_code:
-	wakeup_code_start = .
-	.code16
-
-# Running in *copy* of this code, somewhere in low 1MB.
-
-	cli
-	cld
-	# setup data segment
-	movw	%cs, %ax
-	movw	%ax, %ds		# Make ds:0 point to wakeup_start
-	movw	%ax, %ss
-
-	# Data segment must be set up before we can see whether to beep.
-	testl   $4, realmode_flags - wakeup_code
-	jz      1f
-	BEEP
-1:
-
-					# Private stack is needed for ASUS board
-	mov	$(wakeup_stack - wakeup_code), %sp
-
-	pushl	$0			# Kill any dangerous flags
-	popfl
-
-	movl	real_magic - wakeup_code, %eax
-	cmpl	$0x12345678, %eax
-	jne	bogus_real_magic
-
-	testl	$1, realmode_flags - wakeup_code
-	jz	1f
-	lcall   $0xc000,$3
-	movw	%cs, %ax
-	movw	%ax, %ds		# Bios might have played with that
-	movw	%ax, %ss
-1:
-
-	testl	$2, realmode_flags - wakeup_code
-	jz	1f
-	mov	video_mode - wakeup_code, %ax
-	call	mode_set
-1:
-
-	mov	%ds, %ax			# Find 32bit wakeup_code addr
-	movzx   %ax, %esi			# (Convert %ds:gdt to a liner ptr)
-	shll    $4, %esi
-						# Fix up the vectors
-	addl    %esi, wakeup_32_vector - wakeup_code
-	addl    %esi, wakeup_long64_vector - wakeup_code
-	addl    %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer
-
-	lidtl	%ds:idt_48a - wakeup_code
-	lgdtl	%ds:gdt_48a - wakeup_code	# load gdt with whatever is
-						# appropriate
-
-	movl	$1, %eax			# protected mode (PE) bit
-	lmsw	%ax				# This is it!
-	jmp	1f
-1:
-
-	ljmpl   *(wakeup_32_vector - wakeup_code)
-
-	.balign 4
-wakeup_32_vector:
-	.long   wakeup_32 - wakeup_code
-	.word   __KERNEL32_CS, 0
-
-	.code32
-wakeup_32:
-# Running in this code, but at low address; paging is not yet turned on.
-
-	movl	$__KERNEL_DS, %eax
-	movl	%eax, %ds
-
-	/*
-	 * Prepare for entering 64bits mode
-	 */
-
-	/* Enable PAE */
-	xorl	%eax, %eax
-	btsl	$5, %eax
-	movl	%eax, %cr4
-
-	/* Setup early boot stage 4 level pagetables */
-	leal    (wakeup_level4_pgt - wakeup_code)(%esi), %eax
-	movl	%eax, %cr3
-
-        /* Check if nx is implemented */
-        movl    $0x80000001, %eax
-        cpuid
-        movl    %edx,%edi
-
-	/* Enable Long Mode */
-	xorl    %eax, %eax
-	btsl	$_EFER_LME, %eax
-
-	/* No Execute supported? */
-	btl	$20,%edi
-	jnc     1f
-	btsl	$_EFER_NX, %eax
-				
-	/* Make changes effective */
-1:	movl    $MSR_EFER, %ecx
-	xorl    %edx, %edx
-	wrmsr
-
-	xorl	%eax, %eax
-	btsl	$31, %eax			/* Enable paging and in turn activate Long Mode */
-	btsl	$0, %eax			/* Enable protected mode */
-
-	/* Make changes effective */
-	movl	%eax, %cr0
-
-	/* At this point:
-		CR4.PAE must be 1
-		CS.L must be 0
-		CR3 must point to PML4
-		Next instruction must be a branch
-		This must be on identity-mapped page
-	*/
-	/*
-	 * At this point we're in long mode but in 32bit compatibility mode
-	 * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn
-	 * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load
-	 * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
-	 */
-
-	/* Finally jump in 64bit mode */
-        ljmp    *(wakeup_long64_vector - wakeup_code)(%esi)
-
-	.balign 4
-wakeup_long64_vector:
-	.long   wakeup_long64 - wakeup_code
-	.word   __KERNEL_CS, 0
 
 .code64
-
-	/* Hooray, we are in Long 64-bit mode (but still running in
-	 * low memory)
-	 */
-wakeup_long64:
 	/*
-	 * We must switch to a new descriptor in kernel space for the GDT
-	 * because soon the kernel won't have access anymore to the userspace
-	 * addresses where we're currently running on. We have to do that here
-	 * because in 32bit we couldn't load a 64bit linear address.
+	 * Hooray, we are in Long 64-bit mode (but still running in low memory)
 	 */
-	lgdt	cpu_gdt_descr
-
-	movq    saved_magic, %rax
-	movq    $0x123456789abcdef0, %rdx
-	cmpq    %rdx, %rax
-	jne     bogus_64_magic
+ENTRY(wakeup_long64)
+wakeup_long64:
+	movq	saved_magic, %rax
+	movq	$0x123456789abcdef0, %rdx
+	cmpq	%rdx, %rax
+	jne	bogus_64_magic
 
-	nop
-	nop
 	movw	$__KERNEL_DS, %ax
 	movw	%ax, %ss	
 	movw	%ax, %ds
@@ -208,130 +35,8 @@ wakeup_long64:
 	movq	saved_rip, %rax
 	jmp	*%rax
 
-.code32
-
-	.align	64	
-gdta:
-	/* Its good to keep gdt in sync with one in trampoline.S */
-	.word	0, 0, 0, 0			# dummy
-	/* ??? Why I need the accessed bit set in order for this to work? */
-	.quad   0x00cf9b000000ffff              # __KERNEL32_CS
-	.quad   0x00af9b000000ffff              # __KERNEL_CS
-	.quad   0x00cf93000000ffff              # __KERNEL_DS
-
-idt_48a:
-	.word	0				# idt limit = 0
-	.word	0, 0				# idt base = 0L
-
-gdt_48a:
-	.word	0x800				# gdt limit=2048,
-						#  256 GDT entries
-	.long   gdta - wakeup_code              # gdt base (relocated in later)
-	
-real_magic:	.quad 0
-video_mode:	.quad 0
-realmode_flags:	.quad 0
-
-.code16
-bogus_real_magic:
-	jmp bogus_real_magic
-
-.code64
 bogus_64_magic:
-	jmp bogus_64_magic
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- *	NORMAL_VGA (-1)
- *	EXTENDED_VGA (-2)
- *	ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-# Setting of user mode (AX=mode ID) => CF=success
-
-# For now, we only handle VESA modes (0x0200..0x03ff).  To handle other
-# modes, we should probably compile in the video code from the boot
-# directory.
-.code16
-mode_set:
-	movw	%ax, %bx
-	subb	$VIDEO_FIRST_VESA>>8, %bh
-	cmpb	$2, %bh
-	jb	check_vesa
-
-setbad:
-	clc
-	ret
-
-check_vesa:
-	orw	$0x4000, %bx			# Use linear frame buffer
-	movw	$0x4f02, %ax			# VESA BIOS mode set call
-	int	$0x10
-	cmpw	$0x004f, %ax			# AL=4f if implemented
-	jnz	setbad				# AH=0 if OK
-
-	stc
-	ret
-
-wakeup_stack_begin:	# Stack grows down
-
-.org	0xff0
-wakeup_stack:		# Just below end of page
-
-.org   0x1000
-ENTRY(wakeup_level4_pgt)
-	.quad   level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE
-	.fill   510,8,0
-	/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
-	.quad   level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE
-
-ENTRY(wakeup_end)
-	
-##
-# acpi_copy_wakeup_routine
-#
-# Copy the above routine to low memory.
-#
-# Parameters:
-# %rdi:	place to copy wakeup routine to
-#
-# Returned address is location of code in low memory (past data and stack)
-#
-	.code64
-ENTRY(acpi_copy_wakeup_routine)
-	pushq	%rax
-	pushq	%rdx
-
-	movl	saved_video_mode, %edx
-	movl	%edx, video_mode - wakeup_start (,%rdi)
-	movl	acpi_realmode_flags, %edx
-	movl	%edx, realmode_flags - wakeup_start (,%rdi)
-	movq	$0x12345678, real_magic - wakeup_start (,%rdi)
-	movq	$0x123456789abcdef0, %rdx
-	movq	%rdx, saved_magic
-
-	movq    saved_magic, %rax
-	movq    $0x123456789abcdef0, %rdx
-	cmpq    %rdx, %rax
-	jne     bogus_64_magic
-
-	# restore the regs we used
-	popq	%rdx
-	popq	%rax
-ENTRY(do_suspend_lowlevel_s4bios)
-	ret
+	jmp	bogus_64_magic
 
 	.align 2
 	.p2align 4,,15
@@ -414,7 +119,7 @@ do_suspend_lowlevel:
 	jmp	restore_processor_state
 .LFE5:
 .Lfe5:
-	.size	do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel
+	.size	do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel
 	
 .data
 ALIGN
diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S
new file mode 100644
index 000000000000..6ff3b5730575
--- /dev/null
+++ b/arch/x86/kernel/acpi/wakeup_rm.S
@@ -0,0 +1,10 @@
+/*
+ * Wrapper script for the realmode binary as a transport object
+ * before copying to low memory.
+ */
+	.section ".rodata","a"
+	.globl	wakeup_code_start, wakeup_code_end
+wakeup_code_start:
+	.incbin	"arch/x86/kernel/acpi/realmode/wakeup.bin"
+wakeup_code_end:
+	.size	wakeup_code_start, .-wakeup_code_start
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 45d79ea890ae..df4099dc1c68 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -11,6 +11,8 @@
 #include <asm/mce.h>
 #include <asm/nmi.h>
 #include <asm/vsyscall.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
 
 #define MAX_PATCH_LEN (255-1)
 
@@ -65,7 +67,8 @@ __setup("noreplace-paravirt", setup_noreplace_paravirt);
    get them easily into strings. */
 asm("\t.section .rodata, \"a\"\nintelnops: "
 	GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5 GENERIC_NOP6
-	GENERIC_NOP7 GENERIC_NOP8);
+	GENERIC_NOP7 GENERIC_NOP8
+    "\t.previous");
 extern const unsigned char intelnops[];
 static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -83,7 +86,8 @@ static const unsigned char *const intel_nops[ASM_NOP_MAX+1] = {
 #ifdef K8_NOP1
 asm("\t.section .rodata, \"a\"\nk8nops: "
 	K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
-	K8_NOP7 K8_NOP8);
+	K8_NOP7 K8_NOP8
+    "\t.previous");
 extern const unsigned char k8nops[];
 static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -101,7 +105,8 @@ static const unsigned char *const k8_nops[ASM_NOP_MAX+1] = {
 #ifdef K7_NOP1
 asm("\t.section .rodata, \"a\"\nk7nops: "
 	K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
-	K7_NOP7 K7_NOP8);
+	K7_NOP7 K7_NOP8
+    "\t.previous");
 extern const unsigned char k7nops[];
 static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -119,7 +124,8 @@ static const unsigned char *const k7_nops[ASM_NOP_MAX+1] = {
 #ifdef P6_NOP1
 asm("\t.section .rodata, \"a\"\np6nops: "
 	P6_NOP1 P6_NOP2 P6_NOP3 P6_NOP4 P6_NOP5 P6_NOP6
-	P6_NOP7 P6_NOP8);
+	P6_NOP7 P6_NOP8
+    "\t.previous");
 extern const unsigned char p6nops[];
 static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 	NULL,
@@ -173,7 +179,7 @@ static const unsigned char*const * find_nop_table(void)
 #endif /* CONFIG_X86_64 */
 
 /* Use this to add nops to a buffer, then text_poke the whole buffer. */
-static void add_nops(void *insns, unsigned int len)
+void add_nops(void *insns, unsigned int len)
 {
 	const unsigned char *const *noptable = find_nop_table();
 
@@ -186,6 +192,7 @@ static void add_nops(void *insns, unsigned int len)
 		len -= noplen;
 	}
 }
+EXPORT_SYMBOL_GPL(add_nops);
 
 extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
 extern u8 *__smp_locks[], *__smp_locks_end[];
@@ -201,7 +208,7 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
 	struct alt_instr *a;
 	char insnbuf[MAX_PATCH_LEN];
 
-	DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end);
+	DPRINTK("%s: alt table %p -> %p\n", __func__, start, end);
 	for (a = start; a < end; a++) {
 		u8 *instr = a->instr;
 		BUG_ON(a->replacementlen > a->instrlen);
@@ -213,13 +220,13 @@ void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
 		if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END) {
 			instr = __va(instr - (u8*)VSYSCALL_START + (u8*)__pa_symbol(&__vsyscall_0));
 			DPRINTK("%s: vsyscall fixup: %p => %p\n",
-				__FUNCTION__, a->instr, instr);
+				__func__, a->instr, instr);
 		}
 #endif
 		memcpy(insnbuf, a->replacement, a->replacementlen);
 		add_nops(insnbuf + a->replacementlen,
 			 a->instrlen - a->replacementlen);
-		text_poke(instr, insnbuf, a->instrlen);
+		text_poke_early(instr, insnbuf, a->instrlen);
 	}
 }
 
@@ -280,7 +287,6 @@ void alternatives_smp_module_add(struct module *mod, char *name,
 				 void *text,  void *text_end)
 {
 	struct smp_alt_module *smp;
-	unsigned long flags;
 
 	if (noreplace_smp)
 		return;
@@ -303,42 +309,40 @@ void alternatives_smp_module_add(struct module *mod, char *name,
 	smp->text	= text;
 	smp->text_end	= text_end;
 	DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n",
-		__FUNCTION__, smp->locks, smp->locks_end,
+		__func__, smp->locks, smp->locks_end,
 		smp->text, smp->text_end, smp->name);
 
-	spin_lock_irqsave(&smp_alt, flags);
+	spin_lock(&smp_alt);
 	list_add_tail(&smp->next, &smp_alt_modules);
 	if (boot_cpu_has(X86_FEATURE_UP))
 		alternatives_smp_unlock(smp->locks, smp->locks_end,
 					smp->text, smp->text_end);
-	spin_unlock_irqrestore(&smp_alt, flags);
+	spin_unlock(&smp_alt);
 }
 
 void alternatives_smp_module_del(struct module *mod)
 {
 	struct smp_alt_module *item;
-	unsigned long flags;
 
 	if (smp_alt_once || noreplace_smp)
 		return;
 
-	spin_lock_irqsave(&smp_alt, flags);
+	spin_lock(&smp_alt);
 	list_for_each_entry(item, &smp_alt_modules, next) {
 		if (mod != item->mod)
 			continue;
 		list_del(&item->next);
-		spin_unlock_irqrestore(&smp_alt, flags);
-		DPRINTK("%s: %s\n", __FUNCTION__, item->name);
+		spin_unlock(&smp_alt);
+		DPRINTK("%s: %s\n", __func__, item->name);
 		kfree(item);
 		return;
 	}
-	spin_unlock_irqrestore(&smp_alt, flags);
+	spin_unlock(&smp_alt);
 }
 
 void alternatives_smp_switch(int smp)
 {
 	struct smp_alt_module *mod;
-	unsigned long flags;
 
 #ifdef CONFIG_LOCKDEP
 	/*
@@ -355,7 +359,7 @@ void alternatives_smp_switch(int smp)
 		return;
 	BUG_ON(!smp && (num_online_cpus() > 1));
 
-	spin_lock_irqsave(&smp_alt, flags);
+	spin_lock(&smp_alt);
 
 	/*
 	 * Avoid unnecessary switches because it forces JIT based VMs to
@@ -379,7 +383,7 @@ void alternatives_smp_switch(int smp)
 						mod->text, mod->text_end);
 	}
 	smp_mode = smp;
-	spin_unlock_irqrestore(&smp_alt, flags);
+	spin_unlock(&smp_alt);
 }
 
 #endif
@@ -407,7 +411,7 @@ void apply_paravirt(struct paravirt_patch_site *start,
 
 		/* Pad the rest with nops */
 		add_nops(insnbuf + used, p->len - used);
-		text_poke(p->instr, insnbuf, p->len);
+		text_poke_early(p->instr, insnbuf, p->len);
 	}
 }
 extern struct paravirt_patch_site __start_parainstructions[],
@@ -416,8 +420,6 @@ extern struct paravirt_patch_site __start_parainstructions[],
 
 void __init alternative_instructions(void)
 {
-	unsigned long flags;
-
 	/* The patching is not fully atomic, so try to avoid local interruptions
 	   that might execute the to be patched code.
 	   Other CPUs are not running. */
@@ -426,7 +428,6 @@ void __init alternative_instructions(void)
 	stop_mce();
 #endif
 
-	local_irq_save(flags);
 	apply_alternatives(__alt_instructions, __alt_instructions_end);
 
 	/* switch to patch-once-at-boottime-only mode and free the
@@ -458,7 +459,6 @@ void __init alternative_instructions(void)
 	}
 #endif
  	apply_paravirt(__parainstructions, __parainstructions_end);
-	local_irq_restore(flags);
 
 	if (smp_alt_once)
 		free_init_pages("SMP alternatives",
@@ -471,18 +471,71 @@ void __init alternative_instructions(void)
 #endif
 }
 
-/*
- * Warning:
+/**
+ * text_poke_early - Update instructions on a live kernel at boot time
+ * @addr: address to modify
+ * @opcode: source of the copy
+ * @len: length to copy
+ *
  * When you use this code to patch more than one byte of an instruction
  * you need to make sure that other CPUs cannot execute this code in parallel.
- * Also no thread must be currently preempted in the middle of these instructions.
- * And on the local CPU you need to be protected again NMI or MCE handlers
- * seeing an inconsistent instruction while you patch.
+ * Also no thread must be currently preempted in the middle of these
+ * instructions. And on the local CPU you need to be protected again NMI or MCE
+ * handlers seeing an inconsistent instruction while you patch.
  */
-void __kprobes text_poke(void *addr, unsigned char *opcode, int len)
+void *text_poke_early(void *addr, const void *opcode, size_t len)
 {
+	unsigned long flags;
+	local_irq_save(flags);
 	memcpy(addr, opcode, len);
+	local_irq_restore(flags);
+	sync_core();
+	/* Could also do a CLFLUSH here to speed up CPU recovery; but
+	   that causes hangs on some VIA CPUs. */
+	return addr;
+}
+
+/**
+ * text_poke - Update instructions on a live kernel
+ * @addr: address to modify
+ * @opcode: source of the copy
+ * @len: length to copy
+ *
+ * Only atomic text poke/set should be allowed when not doing early patching.
+ * It means the size must be writable atomically and the address must be aligned
+ * in a way that permits an atomic write. It also makes sure we fit on a single
+ * page.
+ */
+void *__kprobes text_poke(void *addr, const void *opcode, size_t len)
+{
+	unsigned long flags;
+	char *vaddr;
+	int nr_pages = 2;
+
+	BUG_ON(len > sizeof(long));
+	BUG_ON((((long)addr + len - 1) & ~(sizeof(long) - 1))
+		- ((long)addr & ~(sizeof(long) - 1)));
+	if (kernel_text_address((unsigned long)addr)) {
+		struct page *pages[2] = { virt_to_page(addr),
+			virt_to_page(addr + PAGE_SIZE) };
+		if (!pages[1])
+			nr_pages = 1;
+		vaddr = vmap(pages, nr_pages, VM_MAP, PAGE_KERNEL);
+		BUG_ON(!vaddr);
+		local_irq_save(flags);
+		memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len);
+		local_irq_restore(flags);
+		vunmap(vaddr);
+	} else {
+		/*
+		 * modules are in vmalloc'ed memory, always writable.
+		 */
+		local_irq_save(flags);
+		memcpy(addr, opcode, len);
+		local_irq_restore(flags);
+	}
 	sync_core();
 	/* Could also do a CLFLUSH here to speed up CPU recovery; but
 	   that causes hangs on some VIA CPUs. */
+	return addr;
 }
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 608152a2a05e..479926d9e004 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -18,6 +18,7 @@
 #include <linux/pci.h>
 #include <linux/bitops.h>
 #include <linux/ioport.h>
+#include <linux/suspend.h>
 #include <asm/e820.h>
 #include <asm/io.h>
 #include <asm/gart.h>
@@ -26,11 +27,11 @@
 #include <asm/k8.h>
 
 int gart_iommu_aperture;
-int gart_iommu_aperture_disabled __initdata = 0;
-int gart_iommu_aperture_allowed __initdata = 0;
+int gart_iommu_aperture_disabled __initdata;
+int gart_iommu_aperture_allowed __initdata;
 
 int fallback_aper_order __initdata = 1; /* 64MB */
-int fallback_aper_force __initdata = 0;
+int fallback_aper_force __initdata;
 
 int fix_aperture __initdata = 1;
 
@@ -76,6 +77,8 @@ static u32 __init allocate_aperture(void)
 	printk(KERN_INFO "Mapping aperture over %d KB of RAM @ %lx\n",
 			aper_size >> 10, __pa(p));
 	insert_aperture_resource((u32)__pa(p), aper_size);
+	register_nosave_region((u32)__pa(p) >> PAGE_SHIFT,
+				(u32)__pa(p+aper_size) >> PAGE_SHIFT);
 
 	return (u32)__pa(p);
 }
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 35a568ea8400..687208190b06 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -50,6 +50,11 @@
 # error SPURIOUS_APIC_VECTOR definition error
 #endif
 
+unsigned long mp_lapic_addr;
+
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
 /*
  * Knob to control our willingness to enable the local APIC.
  *
@@ -621,6 +626,35 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 /*
+ * Setup extended LVT, AMD specific (K8, family 10h)
+ *
+ * Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
+ * MCE interrupts are supported. Thus MCE offset must be set to 0.
+ */
+
+#define APIC_EILVT_LVTOFF_MCE 0
+#define APIC_EILVT_LVTOFF_IBS 1
+
+static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
+{
+	unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+	unsigned int  v   = (mask << 16) | (msg_type << 8) | vector;
+	apic_write(reg, v);
+}
+
+u8 setup_APIC_eilvt_mce(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_MCE, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_MCE;
+}
+
+u8 setup_APIC_eilvt_ibs(u8 vector, u8 msg_type, u8 mask)
+{
+	setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
+	return APIC_EILVT_LVTOFF_IBS;
+}
+
+/*
  * Local APIC start and shutdown
  */
 
@@ -868,12 +902,50 @@ void __init init_bsp_APIC(void)
 	apic_write_around(APIC_LVT1, value);
 }
 
+void __cpuinit lapic_setup_esr(void)
+{
+	unsigned long oldvalue, value, maxlvt;
+	if (lapic_is_integrated() && !esr_disable) {
+		/* !82489DX */
+		maxlvt = lapic_get_maxlvt();
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
+			apic_write(APIC_ESR, 0);
+		oldvalue = apic_read(APIC_ESR);
+
+		/* enables sending errors */
+		value = ERROR_APIC_VECTOR;
+		apic_write_around(APIC_LVTERR, value);
+		/*
+		 * spec says clear errors after enabling vector.
+		 */
+		if (maxlvt > 3)
+			apic_write(APIC_ESR, 0);
+		value = apic_read(APIC_ESR);
+		if (value != oldvalue)
+			apic_printk(APIC_VERBOSE, "ESR value before enabling "
+				"vector: 0x%08lx  after: 0x%08lx\n",
+				oldvalue, value);
+	} else {
+		if (esr_disable)
+			/*
+			 * Something untraceable is creating bad interrupts on
+			 * secondary quads ... for the moment, just leave the
+			 * ESR disabled - we can't do anything useful with the
+			 * errors anyway - mbligh
+			 */
+			printk(KERN_INFO "Leaving ESR disabled.\n");
+		else
+			printk(KERN_INFO "No ESR for 82489DX.\n");
+	}
+}
+
+
 /**
  * setup_local_APIC - setup the local APIC
  */
 void __cpuinit setup_local_APIC(void)
 {
-	unsigned long oldvalue, value, maxlvt, integrated;
+	unsigned long value, integrated;
 	int i, j;
 
 	/* Pound the ESR really hard over the head with a big hammer - mbligh */
@@ -997,40 +1069,13 @@ void __cpuinit setup_local_APIC(void)
 	if (!integrated)		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
 	apic_write_around(APIC_LVT1, value);
+}
 
-	if (integrated && !esr_disable) {
-		/* !82489DX */
-		maxlvt = lapic_get_maxlvt();
-		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP. */
-			apic_write(APIC_ESR, 0);
-		oldvalue = apic_read(APIC_ESR);
-
-		/* enables sending errors */
-		value = ERROR_APIC_VECTOR;
-		apic_write_around(APIC_LVTERR, value);
-		/*
-		 * spec says clear errors after enabling vector.
-		 */
-		if (maxlvt > 3)
-			apic_write(APIC_ESR, 0);
-		value = apic_read(APIC_ESR);
-		if (value != oldvalue)
-			apic_printk(APIC_VERBOSE, "ESR value before enabling "
-				"vector: 0x%08lx  after: 0x%08lx\n",
-				oldvalue, value);
-	} else {
-		if (esr_disable)
-			/*
-			 * Something untraceable is creating bad interrupts on
-			 * secondary quads ... for the moment, just leave the
-			 * ESR disabled - we can't do anything useful with the
-			 * errors anyway - mbligh
-			 */
-			printk(KERN_INFO "Leaving ESR disabled.\n");
-		else
-			printk(KERN_INFO "No ESR for 82489DX.\n");
-	}
+void __cpuinit end_local_APIC_setup(void)
+{
+	unsigned long value;
 
+	lapic_setup_esr();
 	/* Disable the local apic timer */
 	value = apic_read(APIC_LVTT);
 	value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
@@ -1147,7 +1192,7 @@ void __init init_apic_mappings(void)
 	 * default configuration (or the MP table is broken).
 	 */
 	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+		boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 
 #ifdef CONFIG_X86_IO_APIC
 	{
@@ -1185,6 +1230,9 @@ fake_ioapic_page:
  * This initializes the IO-APIC and APIC hardware if this is
  * a UP kernel.
  */
+
+int apic_version[MAX_APICS];
+
 int __init APIC_init_uniprocessor(void)
 {
 	if (enable_local_apic < 0)
@@ -1214,12 +1262,13 @@ int __init APIC_init_uniprocessor(void)
 	 * might be zero if read from MP tables. Get it from LAPIC.
 	 */
 #ifdef CONFIG_CRASH_DUMP
-	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 #endif
 	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
 
 	setup_local_APIC();
 
+	end_local_APIC_setup();
 #ifdef CONFIG_X86_IO_APIC
 	if (smp_found_config)
 		if (!skip_ioapic_setup && nr_ioapics)
@@ -1288,6 +1337,29 @@ void smp_error_interrupt(struct pt_regs *regs)
 	irq_exit();
 }
 
+#ifdef CONFIG_SMP
+void __init smp_intr_init(void)
+{
+	/*
+	 * IRQ0 must be given a fixed assignment and initialized,
+	 * because it's used before the IO-APIC is set up.
+	 */
+	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
+
+	/*
+	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+	 * IPI, driven by wakeup.
+	 */
+	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+	/* IPI for invalidation */
+	set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
+
+	/* IPI for generic function call */
+	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+}
+#endif
+
 /*
  * Initialize APIC interrupts
  */
@@ -1394,6 +1466,88 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	}
 }
 
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
+
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+	int cpu;
+	cpumask_t tmp_map;
+	physid_mask_t phys_cpu;
+
+	/*
+	 * Validate version
+	 */
+	if (version == 0x0) {
+		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+				"fixing up to 0x10. (tell your hw vendor)\n",
+				version);
+		version = 0x10;
+	}
+	apic_version[apicid] = version;
+
+	phys_cpu = apicid_to_cpu_present(apicid);
+	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+			"  Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+			" Processor ignored.\n", maxcpus);
+		return;
+	}
+
+	num_processors++;
+	cpus_complement(tmp_map, cpu_present_map);
+	cpu = first_cpu(tmp_map);
+
+	if (apicid == boot_cpu_physical_apicid)
+		/*
+		 * x86_bios_cpu_apicid is required to have processors listed
+		 * in same order as logical cpu numbers. Hence the first
+		 * entry is BSP, and so on.
+		 */
+		cpu = 0;
+
+	/*
+	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+	 * but we need to work other dependencies like SMP_SUSPEND etc
+	 * before this can be done without some confusion.
+	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+	 *       - Ashok Raj <ashok.raj@intel.com>
+	 */
+	if (num_processors > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+#ifdef CONFIG_SMP
+	/* are we being called early in kernel startup? */
+	if (x86_cpu_to_apicid_early_ptr) {
+		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
+		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+		cpu_to_apicid[cpu] = apicid;
+		bios_cpu_apicid[cpu] = apicid;
+	} else {
+		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+	}
+#endif
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
+}
+
 /*
  * Power management
  */
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index d8d03e09dea2..9e8e5c050c55 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -34,13 +34,15 @@
 #include <asm/mpspec.h>
 #include <asm/hpet.h>
 #include <asm/pgalloc.h>
-#include <asm/mach_apic.h>
 #include <asm/nmi.h>
 #include <asm/idle.h>
 #include <asm/proto.h>
 #include <asm/timex.h>
 #include <asm/apic.h>
 
+#include <mach_ipi.h>
+#include <mach_apic.h>
+
 int disable_apic_timer __cpuinitdata;
 static int apic_calibrate_pmtmr __initdata;
 int disable_apic;
@@ -83,6 +85,12 @@ static DEFINE_PER_CPU(struct clock_event_device, lapic_events);
 
 static unsigned long apic_phys;
 
+unsigned long mp_lapic_addr;
+
+DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
+
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
 /*
  * Get the LAPIC version
  */
@@ -431,7 +439,8 @@ void __cpuinit check_boot_apic_timer_broadcast(void)
 	lapic_clockevent.features |= CLOCK_EVT_FEAT_DUMMY;
 
 	local_irq_enable();
-	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE, &boot_cpu_id);
+	clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_FORCE,
+			   &boot_cpu_physical_apicid);
 	local_irq_disable();
 }
 
@@ -640,10 +649,10 @@ int __init verify_local_APIC(void)
 	/*
 	 * The ID register is read/write in a real APIC.
 	 */
-	reg0 = apic_read(APIC_ID);
+	reg0 = read_apic_id();
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
 	apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
-	reg1 = apic_read(APIC_ID);
+	reg1 = read_apic_id();
 	apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
 	apic_write(APIC_ID, reg0);
 	if (reg1 != (reg0 ^ APIC_ID_MASK))
@@ -728,6 +737,7 @@ void __cpuinit setup_local_APIC(void)
 	unsigned int value;
 	int i, j;
 
+	preempt_disable();
 	value = apic_read(APIC_LVR);
 
 	BUILD_BUG_ON((SPURIOUS_APIC_VECTOR & 0x0f) != 0x0f);
@@ -821,6 +831,7 @@ void __cpuinit setup_local_APIC(void)
 	else
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
 	apic_write(APIC_LVT1, value);
+	preempt_enable();
 }
 
 void __cpuinit lapic_setup_esr(void)
@@ -857,10 +868,34 @@ static int __init detect_init_APIC(void)
 	}
 
 	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-	boot_cpu_id = 0;
+	boot_cpu_physical_apicid = 0;
 	return 0;
 }
 
+void __init early_init_lapic_mapping(void)
+{
+	unsigned long apic_phys;
+
+	/*
+	 * If no local APIC can be found then go out
+	 * : it means there is no mpatable and MADT
+	 */
+	if (!smp_found_config)
+		return;
+
+	apic_phys = mp_lapic_addr;
+
+	set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
+				 APIC_BASE, apic_phys);
+
+	/*
+	 * Fetch the APIC ID of the BSP in case we have a
+	 * default configuration (or the MP table is broken).
+	 */
+	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+}
+
 /**
  * init_apic_mappings - initialize APIC mappings
  */
@@ -881,16 +916,11 @@ void __init init_apic_mappings(void)
 	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
 				APIC_BASE, apic_phys);
 
-	/* Put local APIC into the resource map. */
-	lapic_resource.start = apic_phys;
-	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
-	insert_resource(&iomem_resource, &lapic_resource);
-
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
 	 * default configuration (or the MP table is broken).
 	 */
-	boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
+	boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
 }
 
 /*
@@ -911,8 +941,8 @@ int __init APIC_init_uniprocessor(void)
 
 	verify_local_APIC();
 
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
-	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_id));
+	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	apic_write(APIC_ID, SET_APIC_ID(boot_cpu_physical_apicid));
 
 	setup_local_APIC();
 
@@ -1029,6 +1059,52 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 	apic_write(APIC_LVT1, value);
 }
 
+void __cpuinit generic_processor_info(int apicid, int version)
+{
+	int cpu;
+	cpumask_t tmp_map;
+
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+		       " Processor ignored.\n", NR_CPUS);
+		return;
+	}
+
+	if (num_processors >= maxcpus) {
+		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+		       " Processor ignored.\n", maxcpus);
+		return;
+	}
+
+	num_processors++;
+	cpus_complement(tmp_map, cpu_present_map);
+	cpu = first_cpu(tmp_map);
+
+	physid_set(apicid, phys_cpu_present_map);
+	if (apicid == boot_cpu_physical_apicid) {
+		/*
+		 * x86_bios_cpu_apicid is required to have processors listed
+		 * in same order as logical cpu numbers. Hence the first
+		 * entry is BSP, and so on.
+		 */
+		cpu = 0;
+	}
+	/* are we being called early in kernel startup? */
+	if (x86_cpu_to_apicid_early_ptr) {
+		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
+		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+
+		cpu_to_apicid[cpu] = apicid;
+		bios_cpu_apicid[cpu] = apicid;
+	} else {
+		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
+		per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
+	}
+
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
+}
+
 /*
  * Power management
  */
@@ -1065,7 +1141,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
 
 	maxlvt = lapic_get_maxlvt();
 
-	apic_pm_state.apic_id = apic_read(APIC_ID);
+	apic_pm_state.apic_id = read_apic_id();
 	apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
 	apic_pm_state.apic_ldr = apic_read(APIC_LDR);
 	apic_pm_state.apic_dfr = apic_read(APIC_DFR);
@@ -1180,9 +1256,19 @@ __cpuinit int apic_is_clustered_box(void)
 {
 	int i, clusters, zeros;
 	unsigned id;
-	u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
+	u16 *bios_cpu_apicid;
 	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
 
+	/*
+	 * there is not this kind of box with AMD CPU yet.
+	 * Some AMD box with quadcore cpu and 8 sockets apicid
+	 * will be [4, 0x23] or [8, 0x27] could be thought to
+	 * vsmp box still need checking...
+	 */
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
+		return 0;
+
+	bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
 	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
@@ -1219,6 +1305,12 @@ __cpuinit int apic_is_clustered_box(void)
 			++zeros;
 	}
 
+	/* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+	 * not guaranteed to be synced between boards
+	 */
+	if (is_vsmp_box() && clusters > 1)
+		return 1;
+
 	/*
 	 * If clusters > 2, then should be multi-chassis.
 	 * May have to revisit this when multi-core + hyperthreaded CPUs come
@@ -1290,3 +1382,21 @@ static __init int setup_apicpmtimer(char *s)
 }
 __setup("apicpmtimer", setup_apicpmtimer);
 
+static int __init lapic_insert_resource(void)
+{
+	if (!apic_phys)
+		return -1;
+
+	/* Put local APIC into the resource map. */
+	lapic_resource.start = apic_phys;
+	lapic_resource.end = lapic_resource.start + PAGE_SIZE - 1;
+	insert_resource(&iomem_resource, &lapic_resource);
+
+	return 0;
+}
+
+/*
+ * need call insert after e820_reserve_resources()
+ * that is using request_resource
+ */
+late_initcall(lapic_insert_resource);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index d4438ef296d8..f0030a0999c7 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -2217,7 +2217,6 @@ static struct dmi_system_id __initdata apm_dmi_table[] = {
  */
 static int __init apm_init(void)
 {
-	struct proc_dir_entry *apm_proc;
 	struct desc_struct *gdt;
 	int err;
 
@@ -2322,9 +2321,7 @@ static int __init apm_init(void)
 	set_base(gdt[APM_DS >> 3],
 		 __va((unsigned long)apm_info.bios.dseg << 4));
 
-	apm_proc = create_proc_entry("apm", 0, NULL);
-	if (apm_proc)
-		apm_proc->proc_fops = &apm_file_ops;
+	proc_create("apm", 0, NULL, &apm_file_ops);
 
 	kapmd_task = kthread_create(apm, NULL, "kapmd");
 	if (IS_ERR(kapmd_task)) {
diff --git a/arch/x86/kernel/asm-offsets_32.c b/arch/x86/kernel/asm-offsets_32.c
index 8ea040124f7d..670c3c311289 100644
--- a/arch/x86/kernel/asm-offsets_32.c
+++ b/arch/x86/kernel/asm-offsets_32.c
@@ -10,7 +10,7 @@
 #include <linux/personality.h>
 #include <linux/suspend.h>
 #include <asm/ucontext.h>
-#include "sigframe_32.h"
+#include "sigframe.h"
 #include <asm/pgtable.h>
 #include <asm/fixmap.h>
 #include <asm/processor.h>
diff --git a/arch/x86/kernel/bugs_64.c b/arch/x86/kernel/bugs_64.c
index 8f520f93ffd4..9a3ed0649d4e 100644
--- a/arch/x86/kernel/bugs_64.c
+++ b/arch/x86/kernel/bugs_64.c
@@ -9,13 +9,25 @@
 #include <asm/bugs.h>
 #include <asm/processor.h>
 #include <asm/mtrr.h>
+#include <asm/cacheflush.h>
 
 void __init check_bugs(void)
 {
-	identify_cpu(&boot_cpu_data);
+	identify_boot_cpu();
 #if !defined(CONFIG_SMP)
 	printk("CPU: ");
 	print_cpu_info(&boot_cpu_data);
 #endif
 	alternative_instructions();
+
+	/*
+	 * Make sure the first 2MB area is not mapped by huge pages
+	 * There are typically fixed size MTRRs in there and overlapping
+	 * MTRRs into large pages causes slow downs.
+	 *
+	 * Right now we don't do that with gbpages because there seems
+	 * very little benefit for that case.
+	 */
+	if (!direct_gbpages)
+		set_memory_4k((unsigned long)__va(0), 1);
 }
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index a0c4d7c5dbd7..ee7c45235e54 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -3,9 +3,9 @@
 #
 
 obj-y			:= intel_cacheinfo.o addon_cpuid_features.o
-obj-y			+= feature_names.o
+obj-y			+= proc.o feature_names.o
 
-obj-$(CONFIG_X86_32)	+= common.o proc.o bugs.o
+obj-$(CONFIG_X86_32)	+= common.o bugs.o
 obj-$(CONFIG_X86_32)	+= amd.o
 obj-$(CONFIG_X86_32)	+= cyrix.o
 obj-$(CONFIG_X86_32)	+= centaur.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 693e353999cd..0173065dc3b7 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -4,8 +4,8 @@
 #include <asm/io.h>
 #include <asm/processor.h>
 #include <asm/apic.h>
-#include <asm/mach_apic.h>
 
+#include <mach_apic.h>
 #include "cpu.h"
 
 /*
@@ -20,7 +20,7 @@
  *	the chip setting when fixing the bug but they also tweaked some
  *	performance at the same time..
  */
- 
+
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
@@ -63,12 +63,12 @@ static __cpuinit int amd_apic_timer_broken(void)
 
 int force_mwait __cpuinitdata;
 
-void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
+static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
 	if (cpuid_eax(0x80000000) >= 0x80000007) {
 		c->x86_power = cpuid_edx(0x80000007);
 		if (c->x86_power & (1<<8))
-			set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
+			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
 }
 
@@ -81,7 +81,8 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 #ifdef CONFIG_SMP
 	unsigned long long value;
 
-	/* Disable TLB flush filter by setting HWCR.FFDIS on K8
+	/*
+	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
 	 * bit 6 of msr C001_0015
 	 *
 	 * Errata 63 for SH-B3 steppings
@@ -102,15 +103,16 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	 *	no bus pipeline)
 	 */
 
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, c->x86_capability);
-	
+	/*
+	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+	 */
+	clear_cpu_cap(c, 0*32+31);
+
 	r = get_model_name(c);
 
-	switch(c->x86)
-	{
-		case 4:
+	switch (c->x86) {
+	case 4:
 		/*
 		 * General Systems BIOSen alias the cpu frequency registers
 		 * of the Elan at 0x000df000. Unfortuantly, one of the Linux
@@ -120,61 +122,60 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 #define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
 #define CBAR_ENB	(0x80000000)
 #define CBAR_KEY	(0X000000CB)
-			if (c->x86_model==9 || c->x86_model == 10) {
+			if (c->x86_model == 9 || c->x86_model == 10) {
 				if (inl (CBAR) & CBAR_ENB)
 					outl (0 | CBAR_KEY, CBAR);
 			}
 			break;
-		case 5:
-			if( c->x86_model < 6 )
-			{
+	case 5:
+			if (c->x86_model < 6) {
 				/* Based on AMD doc 20734R - June 2000 */
-				if ( c->x86_model == 0 ) {
-					clear_bit(X86_FEATURE_APIC, c->x86_capability);
-					set_bit(X86_FEATURE_PGE, c->x86_capability);
+				if (c->x86_model == 0) {
+					clear_cpu_cap(c, X86_FEATURE_APIC);
+					set_cpu_cap(c, X86_FEATURE_PGE);
 				}
 				break;
 			}
-			
-			if ( c->x86_model == 6 && c->x86_mask == 1 ) {
+
+			if (c->x86_model == 6 && c->x86_mask == 1) {
 				const int K6_BUG_LOOP = 1000000;
 				int n;
 				void (*f_vide)(void);
 				unsigned long d, d2;
-				
+
 				printk(KERN_INFO "AMD K6 stepping B detected - ");
-				
+
 				/*
-				 * It looks like AMD fixed the 2.6.2 bug and improved indirect 
+				 * It looks like AMD fixed the 2.6.2 bug and improved indirect
 				 * calls at the same time.
 				 */
 
 				n = K6_BUG_LOOP;
 				f_vide = vide;
 				rdtscl(d);
-				while (n--) 
+				while (n--)
 					f_vide();
 				rdtscl(d2);
 				d = d2-d;
 
-				if (d > 20*K6_BUG_LOOP) 
+				if (d > 20*K6_BUG_LOOP)
 					printk("system stability may be impaired when more than 32 MB are used.\n");
-				else 
+				else
 					printk("probably OK (after B9730xxxx).\n");
 				printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
 			}
 
 			/* K6 with old style WHCR */
 			if (c->x86_model < 8 ||
-			   (c->x86_model== 8 && c->x86_mask < 8)) {
+			   (c->x86_model == 8 && c->x86_mask < 8)) {
 				/* We can only write allocate on the low 508Mb */
-				if(mbytes>508)
-					mbytes=508;
+				if (mbytes > 508)
+					mbytes = 508;
 
 				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0x0000FFFF)==0) {
+				if ((l&0x0000FFFF) == 0) {
 					unsigned long flags;
-					l=(1<<0)|((mbytes/4)<<1);
+					l = (1<<0)|((mbytes/4)<<1);
 					local_irq_save(flags);
 					wbinvd();
 					wrmsr(MSR_K6_WHCR, l, h);
@@ -185,17 +186,17 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 				break;
 			}
 
-			if ((c->x86_model == 8 && c->x86_mask >7) ||
+			if ((c->x86_model == 8 && c->x86_mask > 7) ||
 			     c->x86_model == 9 || c->x86_model == 13) {
 				/* The more serious chips .. */
 
-				if(mbytes>4092)
-					mbytes=4092;
+				if (mbytes > 4092)
+					mbytes = 4092;
 
 				rdmsr(MSR_K6_WHCR, l, h);
-				if ((l&0xFFFF0000)==0) {
+				if ((l&0xFFFF0000) == 0) {
 					unsigned long flags;
-					l=((mbytes>>2)<<22)|(1<<16);
+					l = ((mbytes>>2)<<22)|(1<<16);
 					local_irq_save(flags);
 					wbinvd();
 					wrmsr(MSR_K6_WHCR, l, h);
@@ -207,7 +208,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 				/*  Set MTRR capability flag if appropriate */
 				if (c->x86_model == 13 || c->x86_model == 9 ||
 				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_bit(X86_FEATURE_K6_MTRR, c->x86_capability);
+					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 				break;
 			}
 
@@ -217,10 +218,11 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 				break;
 			}
 			break;
-		case 6: /* An Athlon/Duron */
- 
-			/* Bit 15 of Athlon specific MSR 15, needs to be 0
- 			 * to enable SSE on Palomino/Morgan/Barton CPU's.
+	case 6: /* An Athlon/Duron */
+
+			/*
+			 * Bit 15 of Athlon specific MSR 15, needs to be 0
+			 * to enable SSE on Palomino/Morgan/Barton CPU's.
 			 * If the BIOS didn't enable it already, enable it here.
 			 */
 			if (c->x86_model >= 6 && c->x86_model <= 10) {
@@ -229,15 +231,16 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 					rdmsr(MSR_K7_HWCR, l, h);
 					l &= ~0x00008000;
 					wrmsr(MSR_K7_HWCR, l, h);
-					set_bit(X86_FEATURE_XMM, c->x86_capability);
+					set_cpu_cap(c, X86_FEATURE_XMM);
 				}
 			}
 
-			/* It's been determined by AMD that Athlons since model 8 stepping 1
+			/*
+			 * It's been determined by AMD that Athlons since model 8 stepping 1
 			 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
 			 * As per AMD technical note 27212 0.2
 			 */
-			if ((c->x86_model == 8 && c->x86_mask>=1) || (c->x86_model > 8)) {
+			if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
 				rdmsr(MSR_K7_CLK_CTL, l, h);
 				if ((l & 0xfff00000) != 0x20000000) {
 					printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
@@ -253,20 +256,19 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 	/* Use K8 tuning for Fam10h and Fam11h */
 	case 0x10:
 	case 0x11:
-		set_bit(X86_FEATURE_K8, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_K8);
 		break;
 	case 6:
-		set_bit(X86_FEATURE_K7, c->x86_capability); 
+		set_cpu_cap(c, X86_FEATURE_K7);
 		break;
 	}
 	if (c->x86 >= 6)
-		set_bit(X86_FEATURE_FXSAVE_LEAK, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
 
 	display_cacheinfo(c);
 
-	if (cpuid_eax(0x80000000) >= 0x80000008) {
+	if (cpuid_eax(0x80000000) >= 0x80000008)
 		c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1;
-	}
 
 #ifdef CONFIG_X86_HT
 	/*
@@ -302,20 +304,20 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 
 	/* K6s reports MCEs but don't actually have all the MSRs */
 	if (c->x86 < 6)
-		clear_bit(X86_FEATURE_MCE, c->x86_capability);
+		clear_cpu_cap(c, X86_FEATURE_MCE);
 
 	if (cpu_has_xmm2)
-		set_bit(X86_FEATURE_MFENCE_RDTSC, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
 }
 
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/* AMD errata T13 (order #21922) */
 	if ((c->x86 == 6)) {
 		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
 			size = 64;
 		if (c->x86_model == 4 &&
-		    (c->x86_mask==0 || c->x86_mask==1))	/* Tbird rev A1/A2 */
+		    (c->x86_mask == 0 || c->x86_mask == 1))	/* Tbird rev A1/A2 */
 			size = 256;
 	}
 	return size;
@@ -323,19 +325,20 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 * c, unsigned in
 
 static struct cpu_dev amd_cpu_dev __cpuinitdata = {
 	.c_vendor	= "AMD",
-	.c_ident 	= { "AuthenticAMD" },
+	.c_ident	= { "AuthenticAMD" },
 	.c_models = {
 		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
 		  {
 			  [3] = "486 DX/2",
 			  [7] = "486 DX/2-WB",
-			  [8] = "486 DX/4", 
-			  [9] = "486 DX/4-WB", 
+			  [8] = "486 DX/4",
+			  [9] = "486 DX/4-WB",
 			  [14] = "Am5x86-WT",
-			  [15] = "Am5x86-WB" 
+			  [15] = "Am5x86-WB"
 		  }
 		},
 	},
+	.c_early_init   = early_init_amd,
 	.c_init		= init_amd,
 	.c_size_cache	= amd_size_cache,
 };
@@ -345,3 +348,5 @@ int __init amd_init_cpu(void)
 	cpu_devs[X86_VENDOR_AMD] = &amd_cpu_dev;
 	return 0;
 }
+
+cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev);
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 027e5c003b16..170d2f5523b2 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -143,14 +143,6 @@ static void __init check_config(void)
 #endif
 
 /*
- * If we configured ourselves for a TSC, we'd better have one!
- */
-#ifdef CONFIG_X86_TSC
-	if (!cpu_has_tsc)
-		panic("Kernel compiled for Pentium+, requires TSC feature!");
-#endif
-
-/*
  * If we were told we had a good local APIC, check for buggy Pentia,
  * i.e. all B steppings and the C2 stepping of P54C when using their
  * integrated APIC (see 11AP erratum in "Pentium Processor
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index 9681fa15ddf0..e0f45edd6a55 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -1,31 +1,34 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+
 #include <asm/processor.h>
 #include <asm/msr.h>
 #include <asm/e820.h>
 #include <asm/mtrr.h>
+
 #include "cpu.h"
 
 #ifdef CONFIG_X86_OOSTORE
 
 static u32 __cpuinit power2(u32 x)
 {
-	u32 s=1;
-	while(s<=x)
-		s<<=1;
-	return s>>=1;
+	u32 s = 1;
+
+	while (s <= x)
+		s <<= 1;
+
+	return s >>= 1;
 }
 
 
 /*
- *	Set up an actual MCR
+ * Set up an actual MCR
  */
- 
 static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
 {
 	u32 lo, hi;
-	
+
 	hi = base & ~0xFFF;
 	lo = ~(size-1);		/* Size is a power of 2 so this makes a mask */
 	lo &= ~0xFFF;		/* Remove the ctrl value bits */
@@ -35,30 +38,28 @@ static void __cpuinit centaur_mcr_insert(int reg, u32 base, u32 size, int key)
 }
 
 /*
- *	Figure what we can cover with MCR's
+ * Figure what we can cover with MCR's
  *
- *	Shortcut: We know you can't put 4Gig of RAM on a winchip
+ * Shortcut: We know you can't put 4Gig of RAM on a winchip
  */
-
-static u32 __cpuinit ramtop(void)		/* 16388 */
+static u32 __cpuinit ramtop(void)
 {
-	int i;
-	u32 top = 0;
 	u32 clip = 0xFFFFFFFFUL;
-	
+	u32 top = 0;
+	int i;
+
 	for (i = 0; i < e820.nr_map; i++) {
 		unsigned long start, end;
 
 		if (e820.map[i].addr > 0xFFFFFFFFUL)
 			continue;
 		/*
-		 *	Don't MCR over reserved space. Ignore the ISA hole
-		 *	we frob around that catastrophe already
+		 * Don't MCR over reserved space. Ignore the ISA hole
+		 * we frob around that catastrophe already
 		 */
-		 			
-		if (e820.map[i].type == E820_RESERVED)
-		{
-			if(e820.map[i].addr >= 0x100000UL && e820.map[i].addr < clip)
+		if (e820.map[i].type == E820_RESERVED) {
+			if (e820.map[i].addr >= 0x100000UL &&
+			    e820.map[i].addr < clip)
 				clip = e820.map[i].addr;
 			continue;
 		}
@@ -69,28 +70,27 @@ static u32 __cpuinit ramtop(void)		/* 16388 */
 		if (end > top)
 			top = end;
 	}
-	/* Everything below 'top' should be RAM except for the ISA hole.
-	   Because of the limited MCR's we want to map NV/ACPI into our
-	   MCR range for gunk in RAM 
-	   
-	   Clip might cause us to MCR insufficient RAM but that is an
-	   acceptable failure mode and should only bite obscure boxes with
-	   a VESA hole at 15Mb
-	   
-	   The second case Clip sometimes kicks in is when the EBDA is marked
-	   as reserved. Again we fail safe with reasonable results
-	*/
-	
-	if(top>clip)
-		top=clip;
-		
+	/*
+	 * Everything below 'top' should be RAM except for the ISA hole.
+	 * Because of the limited MCR's we want to map NV/ACPI into our
+	 * MCR range for gunk in RAM
+	 *
+	 * Clip might cause us to MCR insufficient RAM but that is an
+	 * acceptable failure mode and should only bite obscure boxes with
+	 * a VESA hole at 15Mb
+	 *
+	 * The second case Clip sometimes kicks in is when the EBDA is marked
+	 * as reserved. Again we fail safe with reasonable results
+	 */
+	if (top > clip)
+		top = clip;
+
 	return top;
 }
 
 /*
- *	Compute a set of MCR's to give maximum coverage
+ * Compute a set of MCR's to give maximum coverage
  */
-
 static int __cpuinit centaur_mcr_compute(int nr, int key)
 {
 	u32 mem = ramtop();
@@ -99,141 +99,131 @@ static int __cpuinit centaur_mcr_compute(int nr, int key)
 	u32 top = root;
 	u32 floor = 0;
 	int ct = 0;
-	
-	while(ct<nr)
-	{
+
+	while (ct < nr) {
 		u32 fspace = 0;
+		u32 high;
+		u32 low;
 
 		/*
-		 *	Find the largest block we will fill going upwards
+		 * Find the largest block we will fill going upwards
 		 */
-
-		u32 high = power2(mem-top);	
+		high = power2(mem-top);
 
 		/*
-		 *	Find the largest block we will fill going downwards
+		 * Find the largest block we will fill going downwards
 		 */
-
-		u32 low = base/2;
+		low = base/2;
 
 		/*
-		 *	Don't fill below 1Mb going downwards as there
-		 *	is an ISA hole in the way.
-		 */		
-		 
-		if(base <= 1024*1024)
+		 * Don't fill below 1Mb going downwards as there
+		 * is an ISA hole in the way.
+		 */
+		if (base <= 1024*1024)
 			low = 0;
-			
+
 		/*
-		 *	See how much space we could cover by filling below
-		 *	the ISA hole
+		 * See how much space we could cover by filling below
+		 * the ISA hole
 		 */
-		 
-		if(floor == 0)
+
+		if (floor == 0)
 			fspace = 512*1024;
-		else if(floor ==512*1024)
+		else if (floor == 512*1024)
 			fspace = 128*1024;
 
 		/* And forget ROM space */
-		
+
 		/*
-		 *	Now install the largest coverage we get
+		 * Now install the largest coverage we get
 		 */
-		 
-		if(fspace > high && fspace > low)
-		{
+		if (fspace > high && fspace > low) {
 			centaur_mcr_insert(ct, floor, fspace, key);
 			floor += fspace;
-		}
-		else if(high > low)
-		{
+		} else if (high > low) {
 			centaur_mcr_insert(ct, top, high, key);
 			top += high;
-		}
-		else if(low > 0)
-		{
+		} else if (low > 0) {
 			base -= low;
 			centaur_mcr_insert(ct, base, low, key);
-		}
-		else break;
+		} else
+			break;
 		ct++;
 	}
 	/*
-	 *	We loaded ct values. We now need to set the mask. The caller
-	 *	must do this bit.
+	 * We loaded ct values. We now need to set the mask. The caller
+	 * must do this bit.
 	 */
-	 
 	return ct;
 }
 
 static void __cpuinit centaur_create_optimal_mcr(void)
 {
+	int used;
 	int i;
+
 	/*
-	 *	Allocate up to 6 mcrs to mark as much of ram as possible
-	 *	as write combining and weak write ordered.
+	 * Allocate up to 6 mcrs to mark as much of ram as possible
+	 * as write combining and weak write ordered.
 	 *
-	 *	To experiment with: Linux never uses stack operations for 
-	 *	mmio spaces so we could globally enable stack operation wc
+	 * To experiment with: Linux never uses stack operations for
+	 * mmio spaces so we could globally enable stack operation wc
 	 *
-	 *	Load the registers with type 31 - full write combining, all
-	 *	writes weakly ordered.
+	 * Load the registers with type 31 - full write combining, all
+	 * writes weakly ordered.
 	 */
-	int used = centaur_mcr_compute(6, 31);
+	used = centaur_mcr_compute(6, 31);
 
 	/*
-	 *	Wipe unused MCRs
+	 * Wipe unused MCRs
 	 */
-	 
-	for(i=used;i<8;i++)
+	for (i = used; i < 8; i++)
 		wrmsr(MSR_IDT_MCR0+i, 0, 0);
 }
 
 static void __cpuinit winchip2_create_optimal_mcr(void)
 {
 	u32 lo, hi;
+	int used;
 	int i;
 
 	/*
-	 *	Allocate up to 6 mcrs to mark as much of ram as possible
-	 *	as write combining, weak store ordered.
+	 * Allocate up to 6 mcrs to mark as much of ram as possible
+	 * as write combining, weak store ordered.
 	 *
-	 *	Load the registers with type 25
-	 *		8	-	weak write ordering
-	 *		16	-	weak read ordering
-	 *		1	-	write combining
+	 * Load the registers with type 25
+	 *	8	-	weak write ordering
+	 *	16	-	weak read ordering
+	 *	1	-	write combining
 	 */
+	used = centaur_mcr_compute(6, 25);
 
-	int used = centaur_mcr_compute(6, 25);
-	
 	/*
-	 *	Mark the registers we are using.
+	 * Mark the registers we are using.
 	 */
-	 
 	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	for(i=0;i<used;i++)
-		lo|=1<<(9+i);
+	for (i = 0; i < used; i++)
+		lo |= 1<<(9+i);
 	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	
+
 	/*
-	 *	Wipe unused MCRs
+	 * Wipe unused MCRs
 	 */
-	 
-	for(i=used;i<8;i++)
+
+	for (i = used; i < 8; i++)
 		wrmsr(MSR_IDT_MCR0+i, 0, 0);
 }
 
 /*
- *	Handle the MCR key on the Winchip 2.
+ * Handle the MCR key on the Winchip 2.
  */
-
 static void __cpuinit winchip2_unprotect_mcr(void)
 {
 	u32 lo, hi;
 	u32 key;
-	
+
 	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	lo&=~0x1C0;	/* blank bits 8-6 */
+	lo &= ~0x1C0;	/* blank bits 8-6 */
 	key = (lo>>17) & 7;
 	lo |= key<<6;	/* replace with unlock key */
 	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
@@ -242,9 +232,9 @@ static void __cpuinit winchip2_unprotect_mcr(void)
 static void __cpuinit winchip2_protect_mcr(void)
 {
 	u32 lo, hi;
-	
+
 	rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-	lo&=~0x1C0;	/* blank bits 8-6 */
+	lo &= ~0x1C0;	/* blank bits 8-6 */
 	wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
 }
 #endif /* CONFIG_X86_OOSTORE */
@@ -267,17 +257,17 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 
 		/* enable ACE unit, if present and disabled */
 		if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
-			rdmsr (MSR_VIA_FCR, lo, hi);
+			rdmsr(MSR_VIA_FCR, lo, hi);
 			lo |= ACE_FCR;		/* enable ACE unit */
-			wrmsr (MSR_VIA_FCR, lo, hi);
+			wrmsr(MSR_VIA_FCR, lo, hi);
 			printk(KERN_INFO "CPU: Enabled ACE h/w crypto\n");
 		}
 
 		/* enable RNG unit, if present and disabled */
 		if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
-			rdmsr (MSR_VIA_RNG, lo, hi);
+			rdmsr(MSR_VIA_RNG, lo, hi);
 			lo |= RNG_ENABLE;	/* enable RNG unit */
-			wrmsr (MSR_VIA_RNG, lo, hi);
+			wrmsr(MSR_VIA_RNG, lo, hi);
 			printk(KERN_INFO "CPU: Enabled h/w RNG\n");
 		}
 
@@ -288,171 +278,183 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c)
 	}
 
 	/* Cyrix III family needs CX8 & PGE explicitly enabled. */
-	if (c->x86_model >=6 && c->x86_model <= 9) {
-		rdmsr (MSR_VIA_FCR, lo, hi);
+	if (c->x86_model >= 6 && c->x86_model <= 9) {
+		rdmsr(MSR_VIA_FCR, lo, hi);
 		lo |= (1<<1 | 1<<7);
-		wrmsr (MSR_VIA_FCR, lo, hi);
-		set_bit(X86_FEATURE_CX8, c->x86_capability);
+		wrmsr(MSR_VIA_FCR, lo, hi);
+		set_cpu_cap(c, X86_FEATURE_CX8);
 	}
 
 	/* Before Nehemiah, the C3's had 3dNOW! */
-	if (c->x86_model >=6 && c->x86_model <9)
-		set_bit(X86_FEATURE_3DNOW, c->x86_capability);
+	if (c->x86_model >= 6 && c->x86_model < 9)
+		set_cpu_cap(c, X86_FEATURE_3DNOW);
 
 	get_model_name(c);
 	display_cacheinfo(c);
 }
 
+enum {
+		ECX8		= 1<<1,
+		EIERRINT	= 1<<2,
+		DPM		= 1<<3,
+		DMCE		= 1<<4,
+		DSTPCLK		= 1<<5,
+		ELINEAR		= 1<<6,
+		DSMC		= 1<<7,
+		DTLOCK		= 1<<8,
+		EDCTLB		= 1<<8,
+		EMMX		= 1<<9,
+		DPDC		= 1<<11,
+		EBRPRED		= 1<<12,
+		DIC		= 1<<13,
+		DDC		= 1<<14,
+		DNA		= 1<<15,
+		ERETSTK		= 1<<16,
+		E2MMX		= 1<<19,
+		EAMD3D		= 1<<20,
+};
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
-	enum {
-		ECX8=1<<1,
-		EIERRINT=1<<2,
-		DPM=1<<3,
-		DMCE=1<<4,
-		DSTPCLK=1<<5,
-		ELINEAR=1<<6,
-		DSMC=1<<7,
-		DTLOCK=1<<8,
-		EDCTLB=1<<8,
-		EMMX=1<<9,
-		DPDC=1<<11,
-		EBRPRED=1<<12,
-		DIC=1<<13,
-		DDC=1<<14,
-		DNA=1<<15,
-		ERETSTK=1<<16,
-		E2MMX=1<<19,
-		EAMD3D=1<<20,
-	};
 
 	char *name;
-	u32  fcr_set=0;
-	u32  fcr_clr=0;
-	u32  lo,hi,newlo;
-	u32  aa,bb,cc,dd;
+	u32  fcr_set = 0;
+	u32  fcr_clr = 0;
+	u32  lo, hi, newlo;
+	u32  aa, bb, cc, dd;
 
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, c->x86_capability);
+	/*
+	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+	 */
+	clear_cpu_cap(c, 0*32+31);
 
 	switch (c->x86) {
-
-		case 5:
-			switch(c->x86_model) {
-			case 4:
-				name="C6";
-				fcr_set=ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
-				fcr_clr=DPDC;
-				printk(KERN_NOTICE "Disabling bugged TSC.\n");
-				clear_bit(X86_FEATURE_TSC, c->x86_capability);
+	case 5:
+		switch (c->x86_model) {
+		case 4:
+			name = "C6";
+			fcr_set = ECX8|DSMC|EDCTLB|EMMX|ERETSTK;
+			fcr_clr = DPDC;
+			printk(KERN_NOTICE "Disabling bugged TSC.\n");
+			clear_cpu_cap(c, X86_FEATURE_TSC);
 #ifdef CONFIG_X86_OOSTORE
-				centaur_create_optimal_mcr();
-				/* Enable
-					write combining on non-stack, non-string
-					write combining on string, all types
-					weak write ordering 
-					
-				   The C6 original lacks weak read order 
-				   
-				   Note 0x120 is write only on Winchip 1 */
-				   
-				wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
-#endif				
+			centaur_create_optimal_mcr();
+			/*
+			 * Enable:
+			 *	write combining on non-stack, non-string
+			 *	write combining on string, all types
+			 *	weak write ordering
+			 *
+			 * The C6 original lacks weak read order
+			 *
+			 * Note 0x120 is write only on Winchip 1
+			 */
+			wrmsr(MSR_IDT_MCR_CTRL, 0x01F0001F, 0);
+#endif
+			break;
+		case 8:
+			switch (c->x86_mask) {
+			default:
+			name = "2";
+				break;
+			case 7 ... 9:
+				name = "2A";
 				break;
-			case 8:
-				switch(c->x86_mask) {
-				default:
-					name="2";
-					break;
-				case 7 ... 9:
-					name="2A";
-					break;
-				case 10 ... 15:
-					name="2B";
-					break;
-				}
-				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
-				fcr_clr=DPDC;
+			case 10 ... 15:
+				name = "2B";
+				break;
+			}
+			fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|
+				  E2MMX|EAMD3D;
+			fcr_clr = DPDC;
 #ifdef CONFIG_X86_OOSTORE
-				winchip2_unprotect_mcr();
-				winchip2_create_optimal_mcr();
-				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				/* Enable
-					write combining on non-stack, non-string
-					write combining on string, all types
-					weak write ordering 
-				*/
-				lo|=31;				
-				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				winchip2_protect_mcr();
+			winchip2_unprotect_mcr();
+			winchip2_create_optimal_mcr();
+			rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+			/*
+			 * Enable:
+			 *	write combining on non-stack, non-string
+			 *	write combining on string, all types
+			 *	weak write ordering
+			 */
+			lo |= 31;
+			wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+			winchip2_protect_mcr();
 #endif
-				break;
-			case 9:
-				name="3";
-				fcr_set=ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|E2MMX|EAMD3D;
-				fcr_clr=DPDC;
+			break;
+		case 9:
+			name = "3";
+			fcr_set = ECX8|DSMC|DTLOCK|EMMX|EBRPRED|ERETSTK|
+				  E2MMX|EAMD3D;
+			fcr_clr = DPDC;
 #ifdef CONFIG_X86_OOSTORE
-				winchip2_unprotect_mcr();
-				winchip2_create_optimal_mcr();
-				rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				/* Enable
-					write combining on non-stack, non-string
-					write combining on string, all types
-					weak write ordering 
-				*/
-				lo|=31;				
-				wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
-				winchip2_protect_mcr();
+			winchip2_unprotect_mcr();
+			winchip2_create_optimal_mcr();
+			rdmsr(MSR_IDT_MCR_CTRL, lo, hi);
+			/*
+			 * Enable:
+			 *	write combining on non-stack, non-string
+			 *	write combining on string, all types
+			 *	weak write ordering
+			 */
+			lo |= 31;
+			wrmsr(MSR_IDT_MCR_CTRL, lo, hi);
+			winchip2_protect_mcr();
 #endif
-				break;
-			default:
-				name="??";
-			}
+			break;
+		default:
+			name = "??";
+		}
 
-			rdmsr(MSR_IDT_FCR1, lo, hi);
-			newlo=(lo|fcr_set) & (~fcr_clr);
+		rdmsr(MSR_IDT_FCR1, lo, hi);
+		newlo = (lo|fcr_set) & (~fcr_clr);
 
-			if (newlo!=lo) {
-				printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n", lo, newlo );
-				wrmsr(MSR_IDT_FCR1, newlo, hi );
-			} else {
-				printk(KERN_INFO "Centaur FCR is 0x%X\n",lo);
-			}
-			/* Emulate MTRRs using Centaur's MCR. */
-			set_bit(X86_FEATURE_CENTAUR_MCR, c->x86_capability);
-			/* Report CX8 */
-			set_bit(X86_FEATURE_CX8, c->x86_capability);
-			/* Set 3DNow! on Winchip 2 and above. */
-			if (c->x86_model >=8)
-				set_bit(X86_FEATURE_3DNOW, c->x86_capability);
-			/* See if we can find out some more. */
-			if ( cpuid_eax(0x80000000) >= 0x80000005 ) {
-				/* Yes, we can. */
-				cpuid(0x80000005,&aa,&bb,&cc,&dd);
-				/* Add L1 data and code cache sizes. */
-				c->x86_cache_size = (cc>>24)+(dd>>24);
-			}
-			sprintf( c->x86_model_id, "WinChip %s", name );
-			break;
+		if (newlo != lo) {
+			printk(KERN_INFO "Centaur FCR was 0x%X now 0x%X\n",
+				lo, newlo);
+			wrmsr(MSR_IDT_FCR1, newlo, hi);
+		} else {
+			printk(KERN_INFO "Centaur FCR is 0x%X\n", lo);
+		}
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		/* Report CX8 */
+		set_cpu_cap(c, X86_FEATURE_CX8);
+		/* Set 3DNow! on Winchip 2 and above. */
+		if (c->x86_model >= 8)
+			set_cpu_cap(c, X86_FEATURE_3DNOW);
+		/* See if we can find out some more. */
+		if (cpuid_eax(0x80000000) >= 0x80000005) {
+			/* Yes, we can. */
+			cpuid(0x80000005, &aa, &bb, &cc, &dd);
+			/* Add L1 data and code cache sizes. */
+			c->x86_cache_size = (cc>>24)+(dd>>24);
+		}
+		sprintf(c->x86_model_id, "WinChip %s", name);
+		break;
 
-		case 6:
-			init_c3(c);
-			break;
+	case 6:
+		init_c3(c);
+		break;
 	}
 }
 
-static unsigned int __cpuinit centaur_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit
+centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
 	/* VIA C3 CPUs (670-68F) need further shifting. */
 	if ((c->x86 == 6) && ((c->x86_model == 7) || (c->x86_model == 8)))
 		size >>= 8;
 
-	/* VIA also screwed up Nehemiah stepping 1, and made
-	   it return '65KB' instead of '64KB'
-	   - Note, it seems this may only be in engineering samples. */
-	if ((c->x86==6) && (c->x86_model==9) && (c->x86_mask==1) && (size==65))
-		size -=1;
+	/*
+	 * There's also an erratum in Nehemiah stepping 1, which
+	 * returns '65KB' instead of '64KB'
+	 *  - Note, it seems this may only be in engineering samples.
+	 */
+	if ((c->x86 == 6) && (c->x86_model == 9) &&
+				(c->x86_mask == 1) && (size == 65))
+		size -= 1;
 
 	return size;
 }
@@ -464,8 +466,4 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_size_cache	= centaur_size_cache,
 };
 
-int __init centaur_init_cpu(void)
-{
-	cpu_devs[X86_VENDOR_CENTAUR] = &centaur_cpu_dev;
-	return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_CENTAUR, &centaur_cpu_dev);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index a38aafaefc23..35b4f6a9c8ef 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -5,7 +5,6 @@
 #include <linux/module.h>
 #include <linux/percpu.h>
 #include <linux/bootmem.h>
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
@@ -62,9 +61,9 @@ __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
 static int cachesize_override __cpuinitdata = -1;
 static int disable_x86_serial_nr __cpuinitdata = 1;
 
-struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
+struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
 
-static void __cpuinit default_init(struct cpuinfo_x86 * c)
+static void __cpuinit default_init(struct cpuinfo_x86 *c)
 {
 	/* Not much we can do here... */
 	/* Check if at least it has cpuid */
@@ -81,11 +80,11 @@ static struct cpu_dev __cpuinitdata default_cpu = {
 	.c_init	= default_init,
 	.c_vendor = "Unknown",
 };
-static struct cpu_dev * this_cpu __cpuinitdata = &default_cpu;
+static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu;
 
 static int __init cachesize_setup(char *str)
 {
-	get_option (&str, &cachesize_override);
+	get_option(&str, &cachesize_override);
 	return 1;
 }
 __setup("cachesize=", cachesize_setup);
@@ -107,12 +106,12 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c)
 	/* Intel chips right-justify this string for some dumb reason;
 	   undo that brain damage */
 	p = q = &c->x86_model_id[0];
-	while ( *p == ' ' )
+	while (*p == ' ')
 	     p++;
-	if ( p != q ) {
-	     while ( *p )
+	if (p != q) {
+	     while (*p)
 		  *q++ = *p++;
-	     while ( q <= &c->x86_model_id[48] )
+	     while (q <= &c->x86_model_id[48])
 		  *q++ = '\0';	/* Zero-pad the rest */
 	}
 
@@ -130,7 +129,7 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 		cpuid(0x80000005, &dummy, &dummy, &ecx, &edx);
 		printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
 			edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
-		c->x86_cache_size=(ecx>>24)+(edx>>24);	
+		c->x86_cache_size = (ecx>>24)+(edx>>24);
 	}
 
 	if (n < 0x80000006)	/* Some chips just has a large L1. */
@@ -138,16 +137,16 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 
 	ecx = cpuid_ecx(0x80000006);
 	l2size = ecx >> 16;
-	
+
 	/* do processor-specific cache resizing */
 	if (this_cpu->c_size_cache)
-		l2size = this_cpu->c_size_cache(c,l2size);
+		l2size = this_cpu->c_size_cache(c, l2size);
 
 	/* Allow user to override all this if necessary. */
 	if (cachesize_override != -1)
 		l2size = cachesize_override;
 
-	if ( l2size == 0 )
+	if (l2size == 0)
 		return;		/* Again, no L2 cache is possible */
 
 	c->x86_cache_size = l2size;
@@ -156,16 +155,19 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
 	       l2size, ecx & 0xFF);
 }
 
-/* Naming convention should be: <Name> [(<Codename>)] */
-/* This table only is used unless init_<vendor>() below doesn't set it; */
-/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used */
+/*
+ * Naming convention should be: <Name> [(<Codename>)]
+ * This table only is used unless init_<vendor>() below doesn't set it;
+ * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
+ *
+ */
 
 /* Look up CPU names by table lookup. */
 static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
 {
 	struct cpu_model_info *info;
 
-	if ( c->x86_model >= 16 )
+	if (c->x86_model >= 16)
 		return NULL;	/* Range check */
 
 	if (!this_cpu)
@@ -190,9 +192,9 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
 
 	for (i = 0; i < X86_VENDOR_NUM; i++) {
 		if (cpu_devs[i]) {
-			if (!strcmp(v,cpu_devs[i]->c_ident[0]) ||
-			    (cpu_devs[i]->c_ident[1] && 
-			     !strcmp(v,cpu_devs[i]->c_ident[1]))) {
+			if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
+			    (cpu_devs[i]->c_ident[1] &&
+			     !strcmp(v, cpu_devs[i]->c_ident[1]))) {
 				c->x86_vendor = i;
 				if (!early)
 					this_cpu = cpu_devs[i];
@@ -210,7 +212,7 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
 }
 
 
-static int __init x86_fxsr_setup(char * s)
+static int __init x86_fxsr_setup(char *s)
 {
 	setup_clear_cpu_cap(X86_FEATURE_FXSR);
 	setup_clear_cpu_cap(X86_FEATURE_XMM);
@@ -219,7 +221,7 @@ static int __init x86_fxsr_setup(char * s)
 __setup("nofxsr", x86_fxsr_setup);
 
 
-static int __init x86_sep_setup(char * s)
+static int __init x86_sep_setup(char *s)
 {
 	setup_clear_cpu_cap(X86_FEATURE_SEP);
 	return 1;
@@ -306,14 +308,30 @@ static void __cpuinit early_get_cap(struct cpuinfo_x86 *c)
 
 	}
 
-}
+	clear_cpu_cap(c, X86_FEATURE_PAT);
+
+	switch (c->x86_vendor) {
+	case X86_VENDOR_AMD:
+		if (c->x86 >= 0xf && c->x86 <= 0x11)
+			set_cpu_cap(c, X86_FEATURE_PAT);
+		break;
+	case X86_VENDOR_INTEL:
+		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+			set_cpu_cap(c, X86_FEATURE_PAT);
+		break;
+	}
 
-/* Do minimum CPU detection early.
-   Fields really needed: vendor, cpuid_level, family, model, mask, cache alignment.
-   The others are not touched to avoid unwanted side effects.
+}
 
-   WARNING: this function is only called on the BP.  Don't add code here
-   that is supposed to run on all CPUs. */
+/*
+ * Do minimum CPU detection early.
+ * Fields really needed: vendor, cpuid_level, family, model, mask,
+ * cache alignment.
+ * The others are not touched to avoid unwanted side effects.
+ *
+ * WARNING: this function is only called on the BP.  Don't add code here
+ * that is supposed to run on all CPUs.
+ */
 static void __init early_cpu_detect(void)
 {
 	struct cpuinfo_x86 *c = &boot_cpu_data;
@@ -328,19 +346,14 @@ static void __init early_cpu_detect(void)
 
 	get_cpu_vendor(c, 1);
 
-	switch (c->x86_vendor) {
-	case X86_VENDOR_AMD:
-		early_init_amd(c);
-		break;
-	case X86_VENDOR_INTEL:
-		early_init_intel(c);
-		break;
-	}
+	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
+	    cpu_devs[c->x86_vendor]->c_early_init)
+		cpu_devs[c->x86_vendor]->c_early_init(c);
 
 	early_get_cap(c);
 }
 
-static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
+static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 {
 	u32 tfms, xlvl;
 	unsigned int ebx;
@@ -351,13 +364,12 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
 		      (unsigned int *)&c->x86_vendor_id[0],
 		      (unsigned int *)&c->x86_vendor_id[8],
 		      (unsigned int *)&c->x86_vendor_id[4]);
-		
+
 		get_cpu_vendor(c, 0);
 		/* Initialize the standard set of capabilities */
 		/* Note that the vendor-specific code below might override */
-	
 		/* Intel-defined flags: level 0x00000001 */
-		if ( c->cpuid_level >= 0x00000001 ) {
+		if (c->cpuid_level >= 0x00000001) {
 			u32 capability, excap;
 			cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
 			c->x86_capability[0] = capability;
@@ -369,12 +381,14 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
 			if (c->x86 >= 0x6)
 				c->x86_model += ((tfms >> 16) & 0xF) << 4;
 			c->x86_mask = tfms & 15;
+			c->initial_apicid = (ebx >> 24) & 0xFF;
 #ifdef CONFIG_X86_HT
-			c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0);
+			c->apicid = phys_pkg_id(c->initial_apicid, 0);
+			c->phys_proc_id = c->initial_apicid;
 #else
-			c->apicid = (ebx >> 24) & 0xFF;
+			c->apicid = c->initial_apicid;
 #endif
-			if (c->x86_capability[0] & (1<<19))
+			if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
 				c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8;
 		} else {
 			/* Have CPUID level 0 only - unheard of */
@@ -383,33 +397,42 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 * c)
 
 		/* AMD-defined flags: level 0x80000001 */
 		xlvl = cpuid_eax(0x80000000);
-		if ( (xlvl & 0xffff0000) == 0x80000000 ) {
-			if ( xlvl >= 0x80000001 ) {
+		if ((xlvl & 0xffff0000) == 0x80000000) {
+			if (xlvl >= 0x80000001) {
 				c->x86_capability[1] = cpuid_edx(0x80000001);
 				c->x86_capability[6] = cpuid_ecx(0x80000001);
 			}
-			if ( xlvl >= 0x80000004 )
+			if (xlvl >= 0x80000004)
 				get_model_name(c); /* Default name */
 		}
 
 		init_scattered_cpuid_features(c);
 	}
 
-#ifdef CONFIG_X86_HT
-	c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
-#endif
+	clear_cpu_cap(c, X86_FEATURE_PAT);
+
+	switch (c->x86_vendor) {
+	case X86_VENDOR_AMD:
+		if (c->x86 >= 0xf && c->x86 <= 0x11)
+			set_cpu_cap(c, X86_FEATURE_PAT);
+		break;
+	case X86_VENDOR_INTEL:
+		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+			set_cpu_cap(c, X86_FEATURE_PAT);
+		break;
+	}
 }
 
 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
 {
-	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
+	if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
 		/* Disable processor serial number */
-		unsigned long lo,hi;
-		rdmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+		unsigned long lo, hi;
+		rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
 		lo |= 0x200000;
-		wrmsr(MSR_IA32_BBL_CR_CTL,lo,hi);
+		wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
 		printk(KERN_NOTICE "CPU serial number disabled.\n");
-		clear_bit(X86_FEATURE_PN, c->x86_capability);
+		clear_cpu_cap(c, X86_FEATURE_PN);
 
 		/* Disabling the serial number may affect the cpuid level */
 		c->cpuid_level = cpuid_eax(0);
@@ -444,9 +467,11 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	memset(&c->x86_capability, 0, sizeof c->x86_capability);
 
 	if (!have_cpuid_p()) {
-		/* First of all, decide if this is a 486 or higher */
-		/* It's a 486 if we can modify the AC flag */
-		if ( flag_is_changeable_p(X86_EFLAGS_AC) )
+		/*
+		 * First of all, decide if this is a 486 or higher
+		 * It's a 486 if we can modify the AC flag
+		 */
+		if (flag_is_changeable_p(X86_EFLAGS_AC))
 			c->x86 = 4;
 		else
 			c->x86 = 3;
@@ -479,10 +504,10 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	 */
 
 	/* If the model name is still unset, do table lookup. */
-	if ( !c->x86_model_id[0] ) {
+	if (!c->x86_model_id[0]) {
 		char *p;
 		p = table_lookup_model(c);
-		if ( p )
+		if (p)
 			strcpy(c->x86_model_id, p);
 		else
 			/* Last resort... */
@@ -496,9 +521,9 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	 * common between the CPUs.  The first time this routine gets
 	 * executed, c == &boot_cpu_data.
 	 */
-	if ( c != &boot_cpu_data ) {
+	if (c != &boot_cpu_data) {
 		/* AND the already accumulated flags with these */
-		for ( i = 0 ; i < NCAPINTS ; i++ )
+		for (i = 0 ; i < NCAPINTS ; i++)
 			boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
 	}
 
@@ -542,7 +567,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 
 	if (smp_num_siblings == 1) {
 		printk(KERN_INFO  "CPU: Hyper-Threading is disabled\n");
-	} else if (smp_num_siblings > 1 ) {
+	} else if (smp_num_siblings > 1) {
 
 		if (smp_num_siblings > NR_CPUS) {
 			printk(KERN_WARNING "CPU: Unsupported number of the "
@@ -552,7 +577,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 		}
 
 		index_msb = get_count_order(smp_num_siblings);
-		c->phys_proc_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+		c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
 
 		printk(KERN_INFO  "CPU: Physical Processor ID: %d\n",
 		       c->phys_proc_id);
@@ -563,7 +588,7 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c)
 
 		core_bits = get_count_order(c->x86_max_cores);
 
-		c->cpu_core_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) &
+		c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
 					       ((1 << core_bits) - 1);
 
 		if (c->x86_max_cores > 1)
@@ -597,7 +622,7 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
 	else
 		printk("%s", c->x86_model_id);
 
-	if (c->x86_mask || c->cpuid_level >= 0) 
+	if (c->x86_mask || c->cpuid_level >= 0)
 		printk(" stepping %02x\n", c->x86_mask);
 	else
 		printk("\n");
@@ -616,23 +641,15 @@ __setup("clearcpuid=", setup_disablecpuid);
 
 cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
 
-/* This is hacky. :)
- * We're emulating future behavior.
- * In the future, the cpu-specific init functions will be called implicitly
- * via the magic of initcalls.
- * They will insert themselves into the cpu_devs structure.
- * Then, when cpu_init() is called, we can just iterate over that array.
- */
 void __init early_cpu_init(void)
 {
-	intel_cpu_init();
-	cyrix_init_cpu();
-	nsc_init_cpu();
-	amd_init_cpu();
-	centaur_init_cpu();
-	transmeta_init_cpu();
-	nexgen_init_cpu();
-	umc_init_cpu();
+	struct cpu_vendor_dev *cvdev;
+
+	for (cvdev = __x86cpuvendor_start ;
+	     cvdev < __x86cpuvendor_end   ;
+	     cvdev++)
+		cpu_devs[cvdev->vendor] = cvdev->cpu_dev;
+
 	early_cpu_detect();
 }
 
@@ -666,7 +683,7 @@ void __cpuinit cpu_init(void)
 {
 	int cpu = smp_processor_id();
 	struct task_struct *curr = current;
-	struct tss_struct * t = &per_cpu(init_tss, cpu);
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	struct thread_struct *thread = &curr->thread;
 
 	if (cpu_test_and_set(cpu, cpu_initialized)) {
@@ -692,7 +709,7 @@ void __cpuinit cpu_init(void)
 	enter_lazy_tlb(&init_mm, curr);
 
 	load_sp0(t, thread);
-	set_tss_desc(cpu,t);
+	set_tss_desc(cpu, t);
 	load_TR_desc();
 	load_LDT(&init_mm.context);
 
diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h
index e0b38c33d842..783691b2a738 100644
--- a/arch/x86/kernel/cpu/cpu.h
+++ b/arch/x86/kernel/cpu/cpu.h
@@ -14,6 +14,7 @@ struct cpu_dev {
 
 	struct		cpu_model_info c_models[4];
 
+	void            (*c_early_init)(struct cpuinfo_x86 *c);
 	void		(*c_init)(struct cpuinfo_x86 * c);
 	void		(*c_identify)(struct cpuinfo_x86 * c);
 	unsigned int	(*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size);
@@ -21,18 +22,17 @@ struct cpu_dev {
 
 extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM];
 
+struct cpu_vendor_dev {
+	int vendor;
+	struct cpu_dev *cpu_dev;
+};
+
+#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \
+	static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \
+	__attribute__((__section__(".x86cpuvendor.init"))) = \
+	{ cpu_vendor_id, cpu_dev }
+
+extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[];
+
 extern int get_model_name(struct cpuinfo_x86 *c);
 extern void display_cacheinfo(struct cpuinfo_x86 *c);
-
-extern void early_init_intel(struct cpuinfo_x86 *c);
-extern void early_init_amd(struct cpuinfo_x86 *c);
-
-/* Specific CPU type init functions */
-int intel_cpu_init(void);
-int amd_init_cpu(void);
-int cyrix_init_cpu(void);
-int nsc_init_cpu(void);
-int centaur_init_cpu(void);
-int transmeta_init_cpu(void);
-int nexgen_init_cpu(void);
-int umc_init_cpu(void);
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index a962dcb9c408..e2d870de837c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -192,9 +192,9 @@ static void drv_read(struct drv_cmd *cmd)
 	cpumask_t saved_mask = current->cpus_allowed;
 	cmd->val = 0;
 
-	set_cpus_allowed(current, cmd->mask);
+	set_cpus_allowed_ptr(current, &cmd->mask);
 	do_drv_read(cmd);
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 }
 
 static void drv_write(struct drv_cmd *cmd)
@@ -203,30 +203,30 @@ static void drv_write(struct drv_cmd *cmd)
 	unsigned int i;
 
 	for_each_cpu_mask(i, cmd->mask) {
-		set_cpus_allowed(current, cpumask_of_cpu(i));
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 		do_drv_write(cmd);
 	}
 
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return;
 }
 
-static u32 get_cur_val(cpumask_t mask)
+static u32 get_cur_val(const cpumask_t *mask)
 {
 	struct acpi_processor_performance *perf;
 	struct drv_cmd cmd;
 
-	if (unlikely(cpus_empty(mask)))
+	if (unlikely(cpus_empty(*mask)))
 		return 0;
 
-	switch (per_cpu(drv_data, first_cpu(mask))->cpu_feature) {
+	switch (per_cpu(drv_data, first_cpu(*mask))->cpu_feature) {
 	case SYSTEM_INTEL_MSR_CAPABLE:
 		cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
 		cmd.addr.msr.reg = MSR_IA32_PERF_STATUS;
 		break;
 	case SYSTEM_IO_CAPABLE:
 		cmd.type = SYSTEM_IO_CAPABLE;
-		perf = per_cpu(drv_data, first_cpu(mask))->acpi_data;
+		perf = per_cpu(drv_data, first_cpu(*mask))->acpi_data;
 		cmd.addr.io.port = perf->control_register.address;
 		cmd.addr.io.bit_width = perf->control_register.bit_width;
 		break;
@@ -234,7 +234,7 @@ static u32 get_cur_val(cpumask_t mask)
 		return 0;
 	}
 
-	cmd.mask = mask;
+	cmd.mask = *mask;
 
 	drv_read(&cmd);
 
@@ -271,7 +271,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 	unsigned int retval;
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (get_cpu() != cpu) {
 		/* We were not able to run on requested processor */
 		put_cpu();
@@ -329,7 +329,7 @@ static unsigned int get_measured_perf(unsigned int cpu)
 	retval = per_cpu(drv_data, cpu)->max_freq * perf_percent / 100;
 
 	put_cpu();
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 
 	dprintk("cpu %d: performance percent %d\n", cpu, perf_percent);
 	return retval;
@@ -347,13 +347,13 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
 		return 0;
 	}
 
-	freq = extract_freq(get_cur_val(cpumask_of_cpu(cpu)), data);
+	freq = extract_freq(get_cur_val(&cpumask_of_cpu(cpu)), data);
 	dprintk("cur freq = %u\n", freq);
 
 	return freq;
 }
 
-static unsigned int check_freqs(cpumask_t mask, unsigned int freq,
+static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq,
 				struct acpi_cpufreq_data *data)
 {
 	unsigned int cur_freq;
@@ -449,7 +449,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 	drv_write(&cmd);
 
 	if (acpi_pstate_strict) {
-		if (!check_freqs(cmd.mask, freqs.new, data)) {
+		if (!check_freqs(&cmd.mask, freqs.new, data)) {
 			dprintk("acpi_cpufreq_target failed (%d)\n",
 				policy->cpu);
 			return -EAGAIN;
diff --git a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
index 39f8cb18296c..c2f930d86640 100644
--- a/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
+++ b/arch/x86/kernel/cpu/cpufreq/e_powersaver.c
@@ -55,7 +55,6 @@ static int eps_set_state(struct eps_cpu_data *centaur,
 {
 	struct cpufreq_freqs freqs;
 	u32 lo, hi;
-	u8 current_multiplier, current_voltage;
 	int err = 0;
 	int i;
 
@@ -95,6 +94,10 @@ postchange:
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	freqs.new = centaur->fsb * ((lo >> 8) & 0xff);
 
+#ifdef DEBUG
+	{
+	u8 current_multiplier, current_voltage;
+
 	/* Print voltage and multiplier */
 	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
 	current_voltage = lo & 0xff;
@@ -103,7 +106,8 @@ postchange:
 	current_multiplier = (lo >> 8) & 0xff;
 	printk(KERN_INFO "eps: Current multiplier = %d\n",
 		current_multiplier);
-
+	}
+#endif
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	return err;
 }
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 14791ec55cfd..199e4e05e5dc 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -289,8 +289,8 @@ static int __init cpufreq_p4_init(void)
 	if (c->x86_vendor != X86_VENDOR_INTEL)
 		return -ENODEV;
 
-	if (!test_bit(X86_FEATURE_ACPI, c->x86_capability) ||
-		!test_bit(X86_FEATURE_ACC, c->x86_capability))
+	if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
+				!test_cpu_cap(c, X86_FEATURE_ACC))
 		return -ENODEV;
 
 	ret = cpufreq_register_driver(&p4clockmod_driver);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index c99d59d8ef2e..46d4034d9f37 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -478,12 +478,12 @@ static int core_voltage_post_transition(struct powernow_k8_data *data, u32 reqvi
 
 static int check_supported_cpu(unsigned int cpu)
 {
-	cpumask_t oldmask = CPU_MASK_ALL;
+	cpumask_t oldmask;
 	u32 eax, ebx, ecx, edx;
 	unsigned int rc = 0;
 
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	if (smp_processor_id() != cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", cpu);
@@ -528,7 +528,7 @@ static int check_supported_cpu(unsigned int cpu)
 	rc = 1;
 
 out:
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 	return rc;
 }
 
@@ -1015,7 +1015,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 /* Driver entry point to switch to the target frequency */
 static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsigned relation)
 {
-	cpumask_t oldmask = CPU_MASK_ALL;
+	cpumask_t oldmask;
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
 	u32 checkfid;
 	u32 checkvid;
@@ -1030,7 +1030,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1085,7 +1085,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 	ret = 0;
 
 err_out:
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 	return ret;
 }
 
@@ -1104,7 +1104,7 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
 static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
-	cpumask_t oldmask = CPU_MASK_ALL;
+	cpumask_t oldmask;
 	int rc;
 
 	if (!cpu_online(pol->cpu))
@@ -1145,7 +1145,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 
 	/* only run on specific CPU from here on */
 	oldmask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(pol->cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(pol->cpu));
 
 	if (smp_processor_id() != pol->cpu) {
 		printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu);
@@ -1164,7 +1164,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 		fidvid_msr_init();
 
 	/* run on any CPU again */
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 
 	if (cpu_family == CPU_HW_PSTATE)
 		pol->cpus = cpumask_of_cpu(pol->cpu);
@@ -1205,7 +1205,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	return 0;
 
 err_out:
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 	powernow_k8_cpu_exit_acpi(data);
 
 	kfree(data);
@@ -1242,10 +1242,11 @@ static unsigned int powernowk8_get (unsigned int cpu)
 	if (!data)
 		return -EINVAL;
 
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu) {
-		printk(KERN_ERR PFX "limiting to CPU %d failed in powernowk8_get\n", cpu);
-		set_cpus_allowed(current, oldmask);
+		printk(KERN_ERR PFX
+			"limiting to CPU %d failed in powernowk8_get\n", cpu);
+		set_cpus_allowed_ptr(current, &oldmask);
 		return 0;
 	}
 
@@ -1253,13 +1254,14 @@ static unsigned int powernowk8_get (unsigned int cpu)
 		goto out;
 
 	if (cpu_family == CPU_HW_PSTATE)
-		khz = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
+		khz = find_khz_freq_from_pstate(data->powernow_table,
+						data->currpstate);
 	else
 		khz = find_khz_freq_from_fid(data->currfid);
 
 
 out:
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 	return khz;
 }
 
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 3031f1196192..908dd347c67e 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -315,7 +315,7 @@ static unsigned int get_cur_freq(unsigned int cpu)
 	cpumask_t saved_mask;
 
 	saved_mask = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (smp_processor_id() != cpu)
 		return 0;
 
@@ -333,7 +333,7 @@ static unsigned int get_cur_freq(unsigned int cpu)
 		clock_freq = extract_clock(l, cpu, 1);
 	}
 
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return clock_freq;
 }
 
@@ -487,7 +487,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 		else
 			cpu_set(j, set_mask);
 
-		set_cpus_allowed(current, set_mask);
+		set_cpus_allowed_ptr(current, &set_mask);
 		preempt_disable();
 		if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
@@ -555,7 +555,8 @@ static int centrino_target (struct cpufreq_policy *policy,
 
 		if (!cpus_empty(covered_cpus)) {
 			for_each_cpu_mask(j, covered_cpus) {
-				set_cpus_allowed(current, cpumask_of_cpu(j));
+				set_cpus_allowed_ptr(current,
+						     &cpumask_of_cpu(j));
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
 		}
@@ -569,12 +570,12 @@ static int centrino_target (struct cpufreq_policy *policy,
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}
 	}
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return 0;
 
 migrate_end:
 	preempt_enable();
-	set_cpus_allowed(current, saved_mask);
+	set_cpus_allowed_ptr(current, &saved_mask);
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 14d68aa301ee..1b50244b1fdf 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -229,22 +229,22 @@ static unsigned int speedstep_detect_chipset (void)
 	return 0;
 }
 
-static unsigned int _speedstep_get(cpumask_t cpus)
+static unsigned int _speedstep_get(const cpumask_t *cpus)
 {
 	unsigned int speed;
 	cpumask_t cpus_allowed;
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, cpus);
+	set_cpus_allowed_ptr(current, cpus);
 	speed = speedstep_get_processor_frequency(speedstep_processor);
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 	dprintk("detected %u kHz as current frequency\n", speed);
 	return speed;
 }
 
 static unsigned int speedstep_get(unsigned int cpu)
 {
-	return _speedstep_get(cpumask_of_cpu(cpu));
+	return _speedstep_get(&cpumask_of_cpu(cpu));
 }
 
 /**
@@ -267,7 +267,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	if (cpufreq_frequency_table_target(policy, &speedstep_freqs[0], target_freq, relation, &newstate))
 		return -EINVAL;
 
-	freqs.old = _speedstep_get(policy->cpus);
+	freqs.old = _speedstep_get(&policy->cpus);
 	freqs.new = speedstep_freqs[newstate].frequency;
 	freqs.cpu = policy->cpu;
 
@@ -285,12 +285,12 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	}
 
 	/* switch to physical CPU where state is to be changed */
-	set_cpus_allowed(current, policy->cpus);
+	set_cpus_allowed_ptr(current, &policy->cpus);
 
 	speedstep_set_state(newstate);
 
 	/* allow to be run on all CPUs */
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 
 	for_each_cpu_mask(i, policy->cpus) {
 		freqs.cpu = i;
@@ -326,7 +326,7 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 #endif
 
 	cpus_allowed = current->cpus_allowed;
-	set_cpus_allowed(current, policy->cpus);
+	set_cpus_allowed_ptr(current, &policy->cpus);
 
 	/* detect low and high frequency and transition latency */
 	result = speedstep_get_freqs(speedstep_processor,
@@ -334,12 +334,12 @@ static int speedstep_cpu_init(struct cpufreq_policy *policy)
 				     &speedstep_freqs[SPEEDSTEP_HIGH].frequency,
 				     &policy->cpuinfo.transition_latency,
 				     &speedstep_set_state);
-	set_cpus_allowed(current, cpus_allowed);
+	set_cpus_allowed_ptr(current, &cpus_allowed);
 	if (result)
 		return result;
 
 	/* get current speed setting */
-	speed = _speedstep_get(policy->cpus);
+	speed = _speedstep_get(&policy->cpus);
 	if (!speed)
 		return -EIO;
 
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
index f2b5a621d27b..8a85c93bd62a 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-smi.c
@@ -63,7 +63,7 @@ static struct cpufreq_frequency_table speedstep_freqs[] = {
  */
 static int speedstep_smi_ownership (void)
 {
-	u32 command, result, magic;
+	u32 command, result, magic, dummy;
 	u32 function = GET_SPEEDSTEP_OWNER;
 	unsigned char magic_data[] = "Copyright (c) 1999 Intel Corporation";
 
@@ -73,8 +73,11 @@ static int speedstep_smi_ownership (void)
 	dprintk("trying to obtain ownership with command %x at port %x\n", command, smi_port);
 
 	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=D" (result)
+		"pop %%ebp\n"
+		: "=D" (result), "=a" (dummy), "=b" (dummy), "=c" (dummy), "=d" (dummy),
+			"=S" (dummy)
 		: "a" (command), "b" (function), "c" (0), "d" (smi_port),
 			"D" (0), "S" (magic)
 		: "memory"
@@ -96,7 +99,7 @@ static int speedstep_smi_ownership (void)
  */
 static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 {
-	u32 command, result = 0, edi, high_mhz, low_mhz;
+	u32 command, result = 0, edi, high_mhz, low_mhz, dummy;
 	u32 state=0;
 	u32 function = GET_SPEEDSTEP_FREQS;
 
@@ -109,10 +112,12 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 
 	dprintk("trying to determine frequencies with command %x at port %x\n", command, smi_port);
 
-	__asm__ __volatile__("movl $0, %%edi\n"
+	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi)
-		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+		"pop %%ebp"
+		: "=a" (result), "=b" (high_mhz), "=c" (low_mhz), "=d" (state), "=D" (edi), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("result %x, low_freq %u, high_freq %u\n", result, low_mhz, high_mhz);
@@ -135,16 +140,18 @@ static int speedstep_smi_get_freqs (unsigned int *low, unsigned int *high)
 static int speedstep_get_state (void)
 {
 	u32 function=GET_SPEEDSTEP_STATE;
-	u32 result, state, edi, command;
+	u32 result, state, edi, command, dummy;
 
 	command = (smi_sig & 0xffffff00) | (smi_cmd & 0xff);
 
 	dprintk("trying to determine current setting with command %x at port %x\n", command, smi_port);
 
-	__asm__ __volatile__("movl $0, %%edi\n"
+	__asm__ __volatile__(
+		"push %%ebp\n"
 		"out %%al, (%%dx)\n"
-		: "=a" (result), "=b" (state), "=D" (edi)
-		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0)
+		"pop %%ebp\n"
+		: "=a" (result), "=b" (state), "=D" (edi), "=c" (dummy), "=d" (dummy), "=S" (dummy)
+		: "a" (command), "b" (function), "c" (0), "d" (smi_port), "S" (0), "D" (0)
 	);
 
 	dprintk("state is %x, result is %x\n", state, result);
@@ -160,7 +167,7 @@ static int speedstep_get_state (void)
  */
 static void speedstep_set_state (unsigned int state)
 {
-	unsigned int result = 0, command, new_state;
+	unsigned int result = 0, command, new_state, dummy;
 	unsigned long flags;
 	unsigned int function=SET_SPEEDSTEP_STATE;
 	unsigned int retry = 0;
@@ -182,10 +189,12 @@ static void speedstep_set_state (unsigned int state)
 		}
 		retry++;
 		__asm__ __volatile__(
-			"movl $0, %%edi\n"
+			"push %%ebp\n"
 			"out %%al, (%%dx)\n"
-			: "=b" (new_state), "=D" (result)
-			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0)
+			"pop %%ebp"
+			: "=b" (new_state), "=D" (result), "=c" (dummy), "=a" (dummy),
+				"=d" (dummy), "=S" (dummy)
+			: "a" (command), "b" (function), "c" (state), "d" (smi_port), "S" (0), "D" (0)
 			);
 	} while ((new_state != state) && (retry <= SMI_TRIES));
 
@@ -195,7 +204,7 @@ static void speedstep_set_state (unsigned int state)
 	if (new_state == state) {
 		dprintk("change to %u MHz succeeded after %u tries with result %u\n", (speedstep_freqs[new_state].frequency / 1000), retry, result);
 	} else {
-		printk(KERN_ERR "cpufreq: change failed with new_state %u and result %u\n", new_state, result);
+		printk(KERN_ERR "cpufreq: change to state %u failed with new_state %u and result %u\n", state, new_state, result);
 	}
 
 	return;
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 7139b0262703..3fd7a67bb06a 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -19,7 +19,7 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
 	unsigned long flags;
-	
+
 	/* we test for DEVID by checking whether CCR3 is writable */
 	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
@@ -37,8 +37,7 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 			setCx86(CX86_CCR2, ccr2);
 			*dir0 = 0xfe;
 		}
-	}
-	else {
+	} else {
 		setCx86(CX86_CCR3, ccr3);  /* restore CCR3 */
 
 		/* read DIR0 and DIR1 CPU registers */
@@ -86,7 +85,7 @@ static char cyrix_model_mult2[] __cpuinitdata = "12233445";
 static void __cpuinit check_cx686_slop(struct cpuinfo_x86 *c)
 {
 	unsigned long flags;
-	
+
 	if (Cx86_dir0_msb == 3) {
 		unsigned char ccr3, ccr5;
 
@@ -132,7 +131,7 @@ static void __cpuinit set_cx86_memwb(void)
 	/* set 'Not Write-through' */
 	write_cr0(read_cr0() | X86_CR0_NW);
 	/* CCR2 bit 2: lock NW bit and set WT1 */
-	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14 );
+	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
 }
 
 static void __cpuinit set_cx86_inc(void)
@@ -148,7 +147,7 @@ static void __cpuinit set_cx86_inc(void)
 	setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
 	/* PCR0 -- Performance Control */
 	/* Incrementor Margin 10 */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04); 
+	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
 	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
 }
 
@@ -167,16 +166,16 @@ static void __cpuinit geode_configure(void)
 
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10);	/* enable MAPEN */
-	
+
 
 	/* FPU fast, DTE cache, Mem bypass */
 	setCx86(CX86_CCR4, getCx86(CX86_CCR4) | 0x38);
 	setCx86(CX86_CCR3, ccr3);			/* disable MAPEN */
-	
+
 	set_cx86_memwb();
-	set_cx86_reorder();	
+	set_cx86_reorder();
 	set_cx86_inc();
-	
+
 	local_irq_restore(flags);
 }
 
@@ -187,14 +186,16 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 	char *buf = c->x86_model_id;
 	const char *p = NULL;
 
-	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, c->x86_capability);
+	/*
+	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
+	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
+	 */
+	clear_cpu_cap(c, 0*32+31);
 
 	/* Cyrix used bit 24 in extended (AMD) CPUID for Cyrix MMX extensions */
-	if ( test_bit(1*32+24, c->x86_capability) ) {
-		clear_bit(1*32+24, c->x86_capability);
-		set_bit(X86_FEATURE_CXMMX, c->x86_capability);
+	if (test_cpu_cap(c, 1*32+24)) {
+		clear_cpu_cap(c, 1*32+24);
+		set_cpu_cap(c, X86_FEATURE_CXMMX);
 	}
 
 	do_cyrix_devid(&dir0, &dir1);
@@ -213,7 +214,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 	 * the model, multiplier and stepping.  Black magic included,
 	 * to make the silicon step/rev numbers match the printed ones.
 	 */
-	 
+
 	switch (dir0_msn) {
 		unsigned char tmp;
 
@@ -241,7 +242,7 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		} else             /* 686 */
 			p = Cx86_cb+1;
 		/* Emulate MTRRs using Cyrix's ARRs. */
-		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
 		/* 6x86's contain this bug */
 		c->coma_bug = 1;
 		break;
@@ -250,17 +251,18 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 #ifdef CONFIG_PCI
 	{
 		u32 vendor, device;
-		/* It isn't really a PCI quirk directly, but the cure is the
-		   same. The MediaGX has deep magic SMM stuff that handles the
-		   SB emulation. It throws away the fifo on disable_dma() which
-		   is wrong and ruins the audio. 
-
-		   Bug2: VSA1 has a wrap bug so that using maximum sized DMA 
-		   causes bad things. According to NatSemi VSA2 has another
-		   bug to do with 'hlt'. I've not seen any boards using VSA2
-		   and X doesn't seem to support it either so who cares 8).
-		   VSA1 we work around however.
-		*/
+		/*
+		 * It isn't really a PCI quirk directly, but the cure is the
+		 * same. The MediaGX has deep magic SMM stuff that handles the
+		 * SB emulation. It throws away the fifo on disable_dma() which
+		 * is wrong and ruins the audio.
+		 *
+		 *  Bug2: VSA1 has a wrap bug so that using maximum sized DMA
+		 *  causes bad things. According to NatSemi VSA2 has another
+		 *  bug to do with 'hlt'. I've not seen any boards using VSA2
+		 *  and X doesn't seem to support it either so who cares 8).
+		 *  VSA1 we work around however.
+		 */
 
 		printk(KERN_INFO "Working around Cyrix MediaGX virtual DMA bugs.\n");
 		isa_dma_bridge_buggy = 2;
@@ -273,55 +275,51 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 
 		/*
 		 *  The 5510/5520 companion chips have a funky PIT.
-		 */  
+		 */
 		if (vendor == PCI_VENDOR_ID_CYRIX &&
 	 (device == PCI_DEVICE_ID_CYRIX_5510 || device == PCI_DEVICE_ID_CYRIX_5520))
 			mark_tsc_unstable("cyrix 5510/5520 detected");
 	}
 #endif
-		c->x86_cache_size=16;	/* Yep 16K integrated cache thats it */
+		c->x86_cache_size = 16;	/* Yep 16K integrated cache thats it */
 
 		/* GXm supports extended cpuid levels 'ala' AMD */
 		if (c->cpuid_level == 2) {
 			/* Enable cxMMX extensions (GX1 Datasheet 54) */
 			setCx86(CX86_CCR7, getCx86(CX86_CCR7) | 1);
-			
+
 			/*
 			 * GXm : 0x30 ... 0x5f GXm  datasheet 51
 			 * GXlv: 0x6x          GXlv datasheet 54
 			 *  ?  : 0x7x
 			 * GX1 : 0x8x          GX1  datasheet 56
 			 */
-			if((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <=dir1 && dir1 <= 0x8f))
+			if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f))
 				geode_configure();
 			get_model_name(c);  /* get CPU marketing name */
 			return;
-		}
-		else {  /* MediaGX */
+		} else { /* MediaGX */
 			Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4';
 			p = Cx86_cb+2;
 			c->x86_model = (dir1 & 0x20) ? 1 : 2;
 		}
 		break;
 
-        case 5: /* 6x86MX/M II */
-		if (dir1 > 7)
-		{
+	case 5: /* 6x86MX/M II */
+		if (dir1 > 7) {
 			dir0_msn++;  /* M II */
 			/* Enable MMX extensions (App note 108) */
 			setCx86(CX86_CCR7, getCx86(CX86_CCR7)|1);
-		}
-		else
-		{
+		} else {
 			c->coma_bug = 1;      /* 6x86MX, it has the bug. */
 		}
 		tmp = (!(dir0_lsn & 7) || dir0_lsn & 1) ? 2 : 0;
 		Cx86_cb[tmp] = cyrix_model_mult2[dir0_lsn & 7];
 		p = Cx86_cb+tmp;
-        	if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
+		if (((dir1 & 0x0f) > 4) || ((dir1 & 0xf0) == 0x20))
 			(c->x86_model)++;
 		/* Emulate MTRRs using Cyrix's ARRs. */
-		set_bit(X86_FEATURE_CYRIX_ARR, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
 		break;
 
 	case 0xf:  /* Cyrix 486 without DEVID registers */
@@ -343,7 +341,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 		break;
 	}
 	strcpy(buf, Cx86_model[dir0_msn & 7]);
-	if (p) strcat(buf, p);
+	if (p)
+		strcat(buf, p);
 	return;
 }
 
@@ -352,7 +351,8 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
  */
 static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
 {
-	/* There may be GX1 processors in the wild that are branded
+	/*
+	 * There may be GX1 processors in the wild that are branded
 	 * NSC and not Cyrix.
 	 *
 	 * This function only handles the GX processor, and kicks every
@@ -377,7 +377,7 @@ static void __cpuinit init_nsc(struct cpuinfo_x86 *c)
  * by the fact that they preserve the flags across the division of 5/2.
  * PII and PPro exhibit this behavior too, but they have cpuid available.
  */
- 
+
 /*
  * Perform the Cyrix 5/2 test. A Cyrix won't change
  * the flags, while other 486 chips will.
@@ -398,27 +398,26 @@ static inline int test_cyrix_52div(void)
 	return (unsigned char) (test >> 8) == 0x02;
 }
 
-static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c)
+static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 {
 	/* Detect Cyrix with disabled CPUID */
-	if ( c->x86 == 4 && test_cyrix_52div() ) {
+	if (c->x86 == 4 && test_cyrix_52div()) {
 		unsigned char dir0, dir1;
-		
+
 		strcpy(c->x86_vendor_id, "CyrixInstead");
-	        c->x86_vendor = X86_VENDOR_CYRIX;
-	        
-	        /* Actually enable cpuid on the older cyrix */
-	    
-	    	/* Retrieve CPU revisions */
-	    	
+		c->x86_vendor = X86_VENDOR_CYRIX;
+
+		/* Actually enable cpuid on the older cyrix */
+
+		/* Retrieve CPU revisions */
+
 		do_cyrix_devid(&dir0, &dir1);
 
-		dir0>>=4;		
-		
+		dir0 >>= 4;
+
 		/* Check it is an affected model */
-		
-   	        if (dir0 == 5 || dir0 == 3)
-   	        {
+
+		if (dir0 == 5 || dir0 == 3) {
 			unsigned char ccr3;
 			unsigned long flags;
 			printk(KERN_INFO "Enabling CPUID on Cyrix processor.\n");
@@ -434,26 +433,17 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 * c)
 
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
-	.c_ident 	= { "CyrixInstead" },
+	.c_ident	= { "CyrixInstead" },
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
 };
 
-int __init cyrix_init_cpu(void)
-{
-	cpu_devs[X86_VENDOR_CYRIX] = &cyrix_cpu_dev;
-	return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev);
 
 static struct cpu_dev nsc_cpu_dev __cpuinitdata = {
 	.c_vendor	= "NSC",
-	.c_ident 	= { "Geode by NSC" },
+	.c_ident	= { "Geode by NSC" },
 	.c_init		= init_nsc,
 };
 
-int __init nsc_init_cpu(void)
-{
-	cpu_devs[X86_VENDOR_NSC] = &nsc_cpu_dev;
-	return 0;
-}
-
+cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev);
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
index ee975ac6bbcb..e43ad4ad4cba 100644
--- a/arch/x86/kernel/cpu/feature_names.c
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -4,7 +4,7 @@
  * This file must not contain any executable code.
  */
 
-#include "asm/cpufeature.h"
+#include <asm/cpufeature.h>
 
 /*
  * These flag bits must match the definitions in <asm/cpufeature.h>.
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index fae31ce747bd..fe9224c51d37 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -30,7 +30,7 @@
 struct movsl_mask movsl_mask __read_mostly;
 #endif
 
-void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
+static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
 	/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
 	if (c->x86 == 15 && c->x86_cache_alignment == 64)
@@ -45,7 +45,7 @@ void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
  *
  *	This is called before we do cpu ident work
  */
- 
+
 int __cpuinit ppro_with_ram_bug(void)
 {
 	/* Uses data from early_cpu_detect now */
@@ -58,7 +58,7 @@ int __cpuinit ppro_with_ram_bug(void)
 	}
 	return 0;
 }
-	
+
 
 /*
  * P4 Xeon errata 037 workaround.
@@ -69,7 +69,7 @@ static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
 	unsigned long lo, hi;
 
 	if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
-		rdmsr (MSR_IA32_MISC_ENABLE, lo, hi);
+		rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
 		if ((lo & (1<<9)) == 0) {
 			printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
 			printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
@@ -127,10 +127,10 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	 */
 	c->f00f_bug = 0;
 	if (!paravirt_enabled() && c->x86 == 5) {
-		static int f00f_workaround_enabled = 0;
+		static int f00f_workaround_enabled;
 
 		c->f00f_bug = 1;
-		if ( !f00f_workaround_enabled ) {
+		if (!f00f_workaround_enabled) {
 			trap_init_f00f_bug();
 			printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
 			f00f_workaround_enabled = 1;
@@ -139,20 +139,22 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 #endif
 
 	l2 = init_intel_cacheinfo(c);
-	if (c->cpuid_level > 9 ) {
+	if (c->cpuid_level > 9) {
 		unsigned eax = cpuid_eax(10);
 		/* Check for version and the number of counters */
 		if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
-			set_bit(X86_FEATURE_ARCH_PERFMON, c->x86_capability);
+			set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
 	}
 
 	/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
 	if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
-		clear_bit(X86_FEATURE_SEP, c->x86_capability);
+		clear_cpu_cap(c, X86_FEATURE_SEP);
 
-	/* Names for the Pentium II/Celeron processors 
-	   detectable only by also checking the cache size.
-	   Dixon is NOT a Celeron. */
+	/*
+	 * Names for the Pentium II/Celeron processors
+	 * detectable only by also checking the cache size.
+	 * Dixon is NOT a Celeron.
+	 */
 	if (c->x86 == 6) {
 		switch (c->x86_model) {
 		case 5:
@@ -163,14 +165,14 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 					p = "Mobile Pentium II (Dixon)";
 			}
 			break;
-			
+
 		case 6:
 			if (l2 == 128)
 				p = "Celeron (Mendocino)";
 			else if (c->x86_mask == 0 || c->x86_mask == 5)
 				p = "Celeron-A";
 			break;
-			
+
 		case 8:
 			if (l2 == 128)
 				p = "Celeron (Coppermine)";
@@ -178,9 +180,9 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 		}
 	}
 
-	if ( p )
+	if (p)
 		strcpy(c->x86_model_id, p);
-	
+
 	c->x86_max_cores = num_cpu_cores(c);
 
 	detect_ht(c);
@@ -207,28 +209,29 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 #endif
 
 	if (cpu_has_xmm2)
-		set_bit(X86_FEATURE_LFENCE_RDTSC, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
 	if (c->x86 == 15) {
-		set_bit(X86_FEATURE_P4, c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_P4);
 	}
-	if (c->x86 == 6) 
-		set_bit(X86_FEATURE_P3, c->x86_capability);
+	if (c->x86 == 6)
+		set_cpu_cap(c, X86_FEATURE_P3);
 	if (cpu_has_ds) {
 		unsigned int l1;
 		rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
 		if (!(l1 & (1<<11)))
-			set_bit(X86_FEATURE_BTS, c->x86_capability);
+			set_cpu_cap(c, X86_FEATURE_BTS);
 		if (!(l1 & (1<<12)))
-			set_bit(X86_FEATURE_PEBS, c->x86_capability);
+			set_cpu_cap(c, X86_FEATURE_PEBS);
 	}
 
 	if (cpu_has_bts)
 		ds_init_intel(c);
 }
 
-static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned int size)
+static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 {
-	/* Intel PIII Tualatin. This comes in two flavours.
+	/*
+	 * Intel PIII Tualatin. This comes in two flavours.
 	 * One has 256kb of cache, the other 512. We have no way
 	 * to determine which, so we use a boottime override
 	 * for the 512kb model, and assume 256 otherwise.
@@ -240,42 +243,42 @@ static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 * c, unsigned
 
 static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Intel",
-	.c_ident 	= { "GenuineIntel" },
+	.c_ident	= { "GenuineIntel" },
 	.c_models = {
-		{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = 
-		  { 
-			  [0] = "486 DX-25/33", 
-			  [1] = "486 DX-50", 
-			  [2] = "486 SX", 
-			  [3] = "486 DX/2", 
-			  [4] = "486 SL", 
-			  [5] = "486 SX/2", 
-			  [7] = "486 DX/2-WB", 
-			  [8] = "486 DX/4", 
+		{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
+		  {
+			  [0] = "486 DX-25/33",
+			  [1] = "486 DX-50",
+			  [2] = "486 SX",
+			  [3] = "486 DX/2",
+			  [4] = "486 SL",
+			  [5] = "486 SX/2",
+			  [7] = "486 DX/2-WB",
+			  [8] = "486 DX/4",
 			  [9] = "486 DX/4-WB"
 		  }
 		},
 		{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
-		  { 
-			  [0] = "Pentium 60/66 A-step", 
-			  [1] = "Pentium 60/66", 
+		  {
+			  [0] = "Pentium 60/66 A-step",
+			  [1] = "Pentium 60/66",
 			  [2] = "Pentium 75 - 200",
-			  [3] = "OverDrive PODP5V83", 
+			  [3] = "OverDrive PODP5V83",
 			  [4] = "Pentium MMX",
-			  [7] = "Mobile Pentium 75 - 200", 
+			  [7] = "Mobile Pentium 75 - 200",
 			  [8] = "Mobile Pentium MMX"
 		  }
 		},
 		{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
-		  { 
+		  {
 			  [0] = "Pentium Pro A-step",
-			  [1] = "Pentium Pro", 
-			  [3] = "Pentium II (Klamath)", 
-			  [4] = "Pentium II (Deschutes)", 
-			  [5] = "Pentium II (Deschutes)", 
+			  [1] = "Pentium Pro",
+			  [3] = "Pentium II (Klamath)",
+			  [4] = "Pentium II (Deschutes)",
+			  [5] = "Pentium II (Deschutes)",
 			  [6] = "Mobile Pentium II",
-			  [7] = "Pentium III (Katmai)", 
-			  [8] = "Pentium III (Coppermine)", 
+			  [7] = "Pentium III (Katmai)",
+			  [8] = "Pentium III (Coppermine)",
 			  [10] = "Pentium III (Cascades)",
 			  [11] = "Pentium III (Tualatin)",
 		  }
@@ -290,15 +293,12 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = {
 		  }
 		},
 	},
+	.c_early_init   = early_init_intel,
 	.c_init		= init_intel,
 	.c_size_cache	= intel_size_cache,
 };
 
-__init int intel_cpu_init(void)
-{
-	cpu_devs[X86_VENDOR_INTEL] = &intel_cpu_dev;
-	return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev);
 
 #ifndef CONFIG_X86_CMPXCHG
 unsigned long cmpxchg_386_u8(volatile void *ptr, u8 old, u8 new)
@@ -364,5 +364,5 @@ unsigned long long cmpxchg_486_u64(volatile void *ptr, u64 old, u64 new)
 EXPORT_SYMBOL(cmpxchg_486_u64);
 #endif
 
-// arch_initcall(intel_cpu_init);
+/* arch_initcall(intel_cpu_init); */
 
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 1b889860eb73..26d615dcb149 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -129,7 +129,7 @@ struct _cpuid4_info {
 	union _cpuid4_leaf_ebx ebx;
 	union _cpuid4_leaf_ecx ecx;
 	unsigned long size;
-	cpumask_t shared_cpu_map;
+	cpumask_t shared_cpu_map;	/* future?: only cpus/node is needed */
 };
 
 unsigned short			num_cache_leaves;
@@ -451,8 +451,8 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
 }
 
 /* pointer to _cpuid4_info array (for each cache leaf) */
-static struct _cpuid4_info *cpuid4_info[NR_CPUS];
-#define CPUID4_INFO_IDX(x,y)    (&((cpuid4_info[x])[y]))
+static DEFINE_PER_CPU(struct _cpuid4_info *, cpuid4_info);
+#define CPUID4_INFO_IDX(x, y)    (&((per_cpu(cpuid4_info, x))[y]))
 
 #ifdef CONFIG_SMP
 static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
@@ -474,7 +474,7 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
 			if (cpu_data(i).apicid >> index_msb ==
 			    c->apicid >> index_msb) {
 				cpu_set(i, this_leaf->shared_cpu_map);
-				if (i != cpu && cpuid4_info[i])  {
+				if (i != cpu && per_cpu(cpuid4_info, i))  {
 					sibling_leaf = CPUID4_INFO_IDX(i, index);
 					cpu_set(cpu, sibling_leaf->shared_cpu_map);
 				}
@@ -505,8 +505,8 @@ static void __cpuinit free_cache_attributes(unsigned int cpu)
 	for (i = 0; i < num_cache_leaves; i++)
 		cache_remove_shared_cpu_map(cpu, i);
 
-	kfree(cpuid4_info[cpu]);
-	cpuid4_info[cpu] = NULL;
+	kfree(per_cpu(cpuid4_info, cpu));
+	per_cpu(cpuid4_info, cpu) = NULL;
 }
 
 static int __cpuinit detect_cache_attributes(unsigned int cpu)
@@ -519,13 +519,13 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 	if (num_cache_leaves == 0)
 		return -ENOENT;
 
-	cpuid4_info[cpu] = kzalloc(
+	per_cpu(cpuid4_info, cpu) = kzalloc(
 	    sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL);
-	if (cpuid4_info[cpu] == NULL)
+	if (per_cpu(cpuid4_info, cpu) == NULL)
 		return -ENOMEM;
 
 	oldmask = current->cpus_allowed;
-	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	retval = set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	if (retval)
 		goto out;
 
@@ -542,12 +542,12 @@ static int __cpuinit detect_cache_attributes(unsigned int cpu)
 		}
 		cache_shared_cpu_map_setup(cpu, j);
 	}
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, &oldmask);
 
 out:
 	if (retval) {
-		kfree(cpuid4_info[cpu]);
-		cpuid4_info[cpu] = NULL;
+		kfree(per_cpu(cpuid4_info, cpu));
+		per_cpu(cpuid4_info, cpu) = NULL;
 	}
 
 	return retval;
@@ -561,7 +561,7 @@ out:
 extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
 
 /* pointer to kobject for cpuX/cache */
-static struct kobject * cache_kobject[NR_CPUS];
+static DEFINE_PER_CPU(struct kobject *, cache_kobject);
 
 struct _index_kobject {
 	struct kobject kobj;
@@ -570,8 +570,8 @@ struct _index_kobject {
 };
 
 /* pointer to array of kobjects for cpuX/cache/indexY */
-static struct _index_kobject *index_kobject[NR_CPUS];
-#define INDEX_KOBJECT_PTR(x,y)    (&((index_kobject[x])[y]))
+static DEFINE_PER_CPU(struct _index_kobject *, index_kobject);
+#define INDEX_KOBJECT_PTR(x, y)    (&((per_cpu(index_kobject, x))[y]))
 
 #define show_one_plus(file_name, object, val)				\
 static ssize_t show_##file_name						\
@@ -591,11 +591,32 @@ static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
 	return sprintf (buf, "%luK\n", this_leaf->size / 1024);
 }
 
-static ssize_t show_shared_cpu_map(struct _cpuid4_info *this_leaf, char *buf)
+static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf,
+					int type, char *buf)
 {
-	char mask_str[NR_CPUS];
-	cpumask_scnprintf(mask_str, NR_CPUS, this_leaf->shared_cpu_map);
-	return sprintf(buf, "%s\n", mask_str);
+	ptrdiff_t len = PTR_ALIGN(buf + PAGE_SIZE - 1, PAGE_SIZE) - buf;
+	int n = 0;
+
+	if (len > 1) {
+		cpumask_t *mask = &this_leaf->shared_cpu_map;
+
+		n = type?
+			cpulist_scnprintf(buf, len-2, *mask):
+			cpumask_scnprintf(buf, len-2, *mask);
+		buf[n++] = '\n';
+		buf[n] = '\0';
+	}
+	return n;
+}
+
+static inline ssize_t show_shared_cpu_map(struct _cpuid4_info *leaf, char *buf)
+{
+	return show_shared_cpu_map_func(leaf, 0, buf);
+}
+
+static inline ssize_t show_shared_cpu_list(struct _cpuid4_info *leaf, char *buf)
+{
+	return show_shared_cpu_map_func(leaf, 1, buf);
 }
 
 static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
@@ -633,6 +654,7 @@ define_one_ro(ways_of_associativity);
 define_one_ro(number_of_sets);
 define_one_ro(size);
 define_one_ro(shared_cpu_map);
+define_one_ro(shared_cpu_list);
 
 static struct attribute * default_attrs[] = {
 	&type.attr,
@@ -643,6 +665,7 @@ static struct attribute * default_attrs[] = {
 	&number_of_sets.attr,
 	&size.attr,
 	&shared_cpu_map.attr,
+	&shared_cpu_list.attr,
 	NULL
 };
 
@@ -684,10 +707,10 @@ static struct kobj_type ktype_percpu_entry = {
 
 static void __cpuinit cpuid4_cache_sysfs_exit(unsigned int cpu)
 {
-	kfree(cache_kobject[cpu]);
-	kfree(index_kobject[cpu]);
-	cache_kobject[cpu] = NULL;
-	index_kobject[cpu] = NULL;
+	kfree(per_cpu(cache_kobject, cpu));
+	kfree(per_cpu(index_kobject, cpu));
+	per_cpu(cache_kobject, cpu) = NULL;
+	per_cpu(index_kobject, cpu) = NULL;
 	free_cache_attributes(cpu);
 }
 
@@ -703,13 +726,14 @@ static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
 		return err;
 
 	/* Allocate all required memory */
-	cache_kobject[cpu] = kzalloc(sizeof(struct kobject), GFP_KERNEL);
-	if (unlikely(cache_kobject[cpu] == NULL))
+	per_cpu(cache_kobject, cpu) =
+		kzalloc(sizeof(struct kobject), GFP_KERNEL);
+	if (unlikely(per_cpu(cache_kobject, cpu) == NULL))
 		goto err_out;
 
-	index_kobject[cpu] = kzalloc(
+	per_cpu(index_kobject, cpu) = kzalloc(
 	    sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
-	if (unlikely(index_kobject[cpu] == NULL))
+	if (unlikely(per_cpu(index_kobject, cpu) == NULL))
 		goto err_out;
 
 	return 0;
@@ -733,7 +757,8 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	if (unlikely(retval < 0))
 		return retval;
 
-	retval = kobject_init_and_add(cache_kobject[cpu], &ktype_percpu_entry,
+	retval = kobject_init_and_add(per_cpu(cache_kobject, cpu),
+				      &ktype_percpu_entry,
 				      &sys_dev->kobj, "%s", "cache");
 	if (retval < 0) {
 		cpuid4_cache_sysfs_exit(cpu);
@@ -745,13 +770,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 		this_object->cpu = cpu;
 		this_object->index = i;
 		retval = kobject_init_and_add(&(this_object->kobj),
-					      &ktype_cache, cache_kobject[cpu],
+					      &ktype_cache,
+					      per_cpu(cache_kobject, cpu),
 					      "index%1lu", i);
 		if (unlikely(retval)) {
 			for (j = 0; j < i; j++) {
 				kobject_put(&(INDEX_KOBJECT_PTR(cpu,j)->kobj));
 			}
-			kobject_put(cache_kobject[cpu]);
+			kobject_put(per_cpu(cache_kobject, cpu));
 			cpuid4_cache_sysfs_exit(cpu);
 			break;
 		}
@@ -760,7 +786,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	if (!retval)
 		cpu_set(cpu, cache_dev_map);
 
-	kobject_uevent(cache_kobject[cpu], KOBJ_ADD);
+	kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD);
 	return retval;
 }
 
@@ -769,7 +795,7 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
 	unsigned int cpu = sys_dev->id;
 	unsigned long i;
 
-	if (cpuid4_info[cpu] == NULL)
+	if (per_cpu(cpuid4_info, cpu) == NULL)
 		return;
 	if (!cpu_isset(cpu, cache_dev_map))
 		return;
@@ -777,7 +803,7 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
 
 	for (i = 0; i < num_cache_leaves; i++)
 		kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
-	kobject_put(cache_kobject[cpu]);
+	kobject_put(per_cpu(cache_kobject, cpu));
 	cpuid4_cache_sysfs_exit(cpu);
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_32.c b/arch/x86/kernel/cpu/mcheck/mce_32.c
index a5182dcd94ae..774d87cfd8cd 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_32.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_32.c
@@ -10,20 +10,20 @@
 #include <linux/smp.h>
 #include <linux/thread_info.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/mce.h>
 
 #include "mce.h"
 
-int mce_disabled = 0;
+int mce_disabled;
 int nr_mce_banks;
 
 EXPORT_SYMBOL_GPL(nr_mce_banks);	/* non-fatal.o */
 
 /* Handle unconfigured int18 (should never happen) */
-static void unexpected_machine_check(struct pt_regs * regs, long error_code)
-{	
+static void unexpected_machine_check(struct pt_regs *regs, long error_code)
+{
 	printk(KERN_ERR "CPU#%d: Unexpected int18 (Machine Check).\n", smp_processor_id());
 }
 
@@ -33,30 +33,30 @@ void (*machine_check_vector)(struct pt_regs *, long error_code) = unexpected_mac
 /* This has to be run for each processor */
 void mcheck_init(struct cpuinfo_x86 *c)
 {
-	if (mce_disabled==1)
+	if (mce_disabled == 1)
 		return;
 
 	switch (c->x86_vendor) {
-		case X86_VENDOR_AMD:
-			amd_mcheck_init(c);
-			break;
-
-		case X86_VENDOR_INTEL:
-			if (c->x86==5)
-				intel_p5_mcheck_init(c);
-			if (c->x86==6)
-				intel_p6_mcheck_init(c);
-			if (c->x86==15)
-				intel_p4_mcheck_init(c);
-			break;
-
-		case X86_VENDOR_CENTAUR:
-			if (c->x86==5)
-				winchip_mcheck_init(c);
-			break;
-
-		default:
-			break;
+	case X86_VENDOR_AMD:
+		amd_mcheck_init(c);
+		break;
+
+	case X86_VENDOR_INTEL:
+		if (c->x86 == 5)
+			intel_p5_mcheck_init(c);
+		if (c->x86 == 6)
+			intel_p6_mcheck_init(c);
+		if (c->x86 == 15)
+			intel_p4_mcheck_init(c);
+		break;
+
+	case X86_VENDOR_CENTAUR:
+		if (c->x86 == 5)
+			winchip_mcheck_init(c);
+		break;
+
+	default:
+		break;
 	}
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 32671da8184e..7c9a813e1193 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -251,18 +251,18 @@ struct threshold_attr {
 	ssize_t(*store) (struct threshold_block *, const char *, size_t count);
 };
 
-static cpumask_t affinity_set(unsigned int cpu)
+static void affinity_set(unsigned int cpu, cpumask_t *oldmask,
+					   cpumask_t *newmask)
 {
-	cpumask_t oldmask = current->cpus_allowed;
-	cpumask_t newmask = CPU_MASK_NONE;
-	cpu_set(cpu, newmask);
-	set_cpus_allowed(current, newmask);
-	return oldmask;
+	*oldmask = current->cpus_allowed;
+	cpus_clear(*newmask);
+	cpu_set(cpu, *newmask);
+	set_cpus_allowed_ptr(current, newmask);
 }
 
-static void affinity_restore(cpumask_t oldmask)
+static void affinity_restore(const cpumask_t *oldmask)
 {
-	set_cpus_allowed(current, oldmask);
+	set_cpus_allowed_ptr(current, oldmask);
 }
 
 #define SHOW_FIELDS(name)                                           \
@@ -277,15 +277,15 @@ static ssize_t store_interrupt_enable(struct threshold_block *b,
 				      const char *buf, size_t count)
 {
 	char *end;
-	cpumask_t oldmask;
+	cpumask_t oldmask, newmask;
 	unsigned long new = simple_strtoul(buf, &end, 0);
 	if (end == buf)
 		return -EINVAL;
 	b->interrupt_enable = !!new;
 
-	oldmask = affinity_set(b->cpu);
+	affinity_set(b->cpu, &oldmask, &newmask);
 	threshold_restart_bank(b, 0, 0);
-	affinity_restore(oldmask);
+	affinity_restore(&oldmask);
 
 	return end - buf;
 }
@@ -294,7 +294,7 @@ static ssize_t store_threshold_limit(struct threshold_block *b,
 				     const char *buf, size_t count)
 {
 	char *end;
-	cpumask_t oldmask;
+	cpumask_t oldmask, newmask;
 	u16 old;
 	unsigned long new = simple_strtoul(buf, &end, 0);
 	if (end == buf)
@@ -306,9 +306,9 @@ static ssize_t store_threshold_limit(struct threshold_block *b,
 	old = b->threshold_limit;
 	b->threshold_limit = new;
 
-	oldmask = affinity_set(b->cpu);
+	affinity_set(b->cpu, &oldmask, &newmask);
 	threshold_restart_bank(b, 0, old);
-	affinity_restore(oldmask);
+	affinity_restore(&oldmask);
 
 	return end - buf;
 }
@@ -316,10 +316,10 @@ static ssize_t store_threshold_limit(struct threshold_block *b,
 static ssize_t show_error_count(struct threshold_block *b, char *buf)
 {
 	u32 high, low;
-	cpumask_t oldmask;
-	oldmask = affinity_set(b->cpu);
+	cpumask_t oldmask, newmask;
+	affinity_set(b->cpu, &oldmask, &newmask);
 	rdmsr(b->address, low, high);
-	affinity_restore(oldmask);
+	affinity_restore(&oldmask);
 	return sprintf(buf, "%x\n",
 		       (high & 0xFFF) - (THRESHOLD_MAX - b->threshold_limit));
 }
@@ -327,10 +327,10 @@ static ssize_t show_error_count(struct threshold_block *b, char *buf)
 static ssize_t store_error_count(struct threshold_block *b,
 				 const char *buf, size_t count)
 {
-	cpumask_t oldmask;
-	oldmask = affinity_set(b->cpu);
+	cpumask_t oldmask, newmask;
+	affinity_set(b->cpu, &oldmask, &newmask);
 	threshold_restart_bank(b, 1, 0);
-	affinity_restore(oldmask);
+	affinity_restore(&oldmask);
 	return 1;
 }
 
@@ -468,7 +468,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 {
 	int i, err = 0;
 	struct threshold_bank *b = NULL;
-	cpumask_t oldmask = CPU_MASK_NONE;
+	cpumask_t oldmask, newmask;
 	char name[32];
 
 	sprintf(name, "threshold_bank%i", bank);
@@ -519,10 +519,10 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 
 	per_cpu(threshold_banks, cpu)[bank] = b;
 
-	oldmask = affinity_set(cpu);
+	affinity_set(cpu, &oldmask, &newmask);
 	err = allocate_threshold_blocks(cpu, bank, 0,
 					MSR_IA32_MC0_MISC + bank * 4);
-	affinity_restore(oldmask);
+	affinity_restore(&oldmask);
 
 	if (err)
 		goto out_free;
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index bf39409b3838..00ccb6c14ec2 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -16,7 +16,7 @@
 #include <linux/smp.h>
 #include <linux/module.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 
@@ -26,23 +26,26 @@ static int firstbank;
 
 #define MCE_RATE	15*HZ	/* timer rate is 15s */
 
-static void mce_checkregs (void *info)
+static void mce_checkregs(void *info)
 {
 	u32 low, high;
 	int i;
 
-	for (i=firstbank; i<nr_mce_banks; i++) {
-		rdmsr (MSR_IA32_MC0_STATUS+i*4, low, high);
+	for (i = firstbank; i < nr_mce_banks; i++) {
+		rdmsr(MSR_IA32_MC0_STATUS+i*4, low, high);
 
 		if (high & (1<<31)) {
 			printk(KERN_INFO "MCE: The hardware reports a non "
 				"fatal, correctable incident occurred on "
 				"CPU %d.\n",
 				smp_processor_id());
-			printk (KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
+			printk(KERN_INFO "Bank %d: %08x%08x\n", i, high, low);
 
-			/* Scrub the error so we don't pick it up in MCE_RATE seconds time. */
-			wrmsr (MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
+			/*
+			 * Scrub the error so we don't pick it up in MCE_RATE
+			 * seconds time.
+			 */
+			wrmsr(MSR_IA32_MC0_STATUS+i*4, 0UL, 0UL);
 
 			/* Serialize */
 			wmb();
@@ -55,10 +58,10 @@ static void mce_work_fn(struct work_struct *work);
 static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
 
 static void mce_work_fn(struct work_struct *work)
-{ 
+{
 	on_each_cpu(mce_checkregs, NULL, 1, 1);
 	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
-} 
+}
 
 static int __init init_nonfatal_mce_checker(void)
 {
diff --git a/arch/x86/kernel/cpu/mcheck/p5.c b/arch/x86/kernel/cpu/mcheck/p5.c
index a18310aaae0c..bfa5817afdda 100644
--- a/arch/x86/kernel/cpu/mcheck/p5.c
+++ b/arch/x86/kernel/cpu/mcheck/p5.c
@@ -9,20 +9,20 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 
 #include "mce.h"
 
 /* Machine check handler for Pentium class Intel */
-static void pentium_machine_check(struct pt_regs * regs, long error_code)
+static void pentium_machine_check(struct pt_regs *regs, long error_code)
 {
 	u32 loaddr, hi, lotype;
 	rdmsr(MSR_IA32_P5_MC_ADDR, loaddr, hi);
 	rdmsr(MSR_IA32_P5_MC_TYPE, lotype, hi);
 	printk(KERN_EMERG "CPU#%d: Machine Check Exception:  0x%8X (type 0x%8X).\n", smp_processor_id(), loaddr, lotype);
-	if(lotype&(1<<5))
+	if (lotype&(1<<5))
 		printk(KERN_EMERG "CPU#%d: Possible thermal failure (CPU on fire ?).\n", smp_processor_id());
 	add_taint(TAINT_MACHINE_CHECK);
 }
@@ -31,13 +31,13 @@ static void pentium_machine_check(struct pt_regs * regs, long error_code)
 void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
-	
+
 	/*Check for MCE support */
-	if( !cpu_has(c, X86_FEATURE_MCE) )
-		return;	
+	if (!cpu_has(c, X86_FEATURE_MCE))
+		return;
 
 	/* Default P5 to off as its often misconnected */
-	if(mce_disabled != -1)
+	if (mce_disabled != -1)
 		return;
 	machine_check_vector = pentium_machine_check;
 	wmb();
@@ -47,7 +47,7 @@ void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
 	rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
 	printk(KERN_INFO "Intel old style machine check architecture supported.\n");
 
- 	/* Enable MCE */
+	/* Enable MCE */
 	set_in_cr4(X86_CR4_MCE);
 	printk(KERN_INFO "Intel old style machine check reporting enabled on CPU#%d.\n", smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/p6.c b/arch/x86/kernel/cpu/mcheck/p6.c
index 74342604d30e..62efc9c2b3af 100644
--- a/arch/x86/kernel/cpu/mcheck/p6.c
+++ b/arch/x86/kernel/cpu/mcheck/p6.c
@@ -9,23 +9,23 @@
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 
 #include "mce.h"
 
 /* Machine Check Handler For PII/PIII */
-static void intel_machine_check(struct pt_regs * regs, long error_code)
+static void intel_machine_check(struct pt_regs *regs, long error_code)
 {
-	int recover=1;
+	int recover = 1;
 	u32 alow, ahigh, high, low;
 	u32 mcgstl, mcgsth;
 	int i;
 
-	rdmsr (MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
+	rdmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 	if (mcgstl & (1<<0))	/* Recoverable ? */
-		recover=0;
+		recover = 0;
 
 	printk(KERN_EMERG "CPU %d: Machine Check Exception: %08x%08x\n",
 		smp_processor_id(), mcgsth, mcgstl);
@@ -55,30 +55,30 @@ static void intel_machine_check(struct pt_regs * regs, long error_code)
 	}
 
 	if (recover & 2)
-		panic ("CPU context corrupt");
+		panic("CPU context corrupt");
 	if (recover & 1)
-		panic ("Unable to continue");
+		panic("Unable to continue");
 
-	printk (KERN_EMERG "Attempting to continue.\n");
-	/* 
-	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not 
+	printk(KERN_EMERG "Attempting to continue.\n");
+	/*
+	 * Do not clear the MSR_IA32_MCi_STATUS if the error is not
 	 * recoverable/continuable.This will allow BIOS to look at the MSRs
 	 * for errors if the OS could not log the error.
 	 */
-	for (i=0; i<nr_mce_banks; i++) {
+	for (i = 0; i < nr_mce_banks; i++) {
 		unsigned int msr;
 		msr = MSR_IA32_MC0_STATUS+i*4;
-		rdmsr (msr,low, high);
+		rdmsr(msr, low, high);
 		if (high & (1<<31)) {
 			/* Clear it */
-			wrmsr (msr, 0UL, 0UL);
+			wrmsr(msr, 0UL, 0UL);
 			/* Serialize */
 			wmb();
 			add_taint(TAINT_MACHINE_CHECK);
 		}
 	}
 	mcgstl &= ~(1<<2);
-	wrmsr (MSR_IA32_MCG_STATUS,mcgstl, mcgsth);
+	wrmsr(MSR_IA32_MCG_STATUS, mcgstl, mcgsth);
 }
 
 /* Set up machine check reporting for processors with Intel style MCE */
@@ -86,21 +86,21 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 {
 	u32 l, h;
 	int i;
-	
+
 	/* Check for MCE support */
 	if (!cpu_has(c, X86_FEATURE_MCE))
 		return;
 
 	/* Check for PPro style MCA */
- 	if (!cpu_has(c, X86_FEATURE_MCA))
+	if (!cpu_has(c, X86_FEATURE_MCA))
 		return;
 
 	/* Ok machine check is available */
 	machine_check_vector = intel_machine_check;
 	wmb();
 
-	printk (KERN_INFO "Intel machine check architecture supported.\n");
-	rdmsr (MSR_IA32_MCG_CAP, l, h);
+	printk(KERN_INFO "Intel machine check architecture supported.\n");
+	rdmsr(MSR_IA32_MCG_CAP, l, h);
 	if (l & (1<<8))	/* Control register present ? */
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 	nr_mce_banks = l & 0xff;
@@ -110,13 +110,13 @@ void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
 	 * - MC0_CTL should not be written
 	 * - Status registers on all banks should be cleared on reset
 	 */
-	for (i=1; i<nr_mce_banks; i++)
-		wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
+	for (i = 1; i < nr_mce_banks; i++)
+		wrmsr(MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
 
-	for (i=0; i<nr_mce_banks; i++)
-		wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
+	for (i = 0; i < nr_mce_banks; i++)
+		wrmsr(MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
 
-	set_in_cr4 (X86_CR4_MCE);
-	printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
+	set_in_cr4(X86_CR4_MCE);
+	printk(KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
 		smp_processor_id());
 }
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 9b7e01daa1ca..1f4cc48c14c6 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -1,5 +1,4 @@
 /*
- * linux/arch/i386/kernel/cpu/mcheck/therm_throt.c
  *
  * Thermal throttle event support code (such as syslog messaging and rate
  * limiting) that was factored out from x86_64 (mce_intel.c) and i386 (p4.c).
diff --git a/arch/x86/kernel/cpu/mcheck/winchip.c b/arch/x86/kernel/cpu/mcheck/winchip.c
index 3d428d5afc52..f2be3e190c6b 100644
--- a/arch/x86/kernel/cpu/mcheck/winchip.c
+++ b/arch/x86/kernel/cpu/mcheck/winchip.c
@@ -8,14 +8,14 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 
-#include <asm/processor.h> 
+#include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/msr.h>
 
 #include "mce.h"
 
 /* Machine check handler for WinChip C6 */
-static void winchip_machine_check(struct pt_regs * regs, long error_code)
+static void winchip_machine_check(struct pt_regs *regs, long error_code)
 {
 	printk(KERN_EMERG "CPU0: Machine Check Exception.\n");
 	add_taint(TAINT_MACHINE_CHECK);
@@ -28,8 +28,8 @@ void winchip_mcheck_init(struct cpuinfo_x86 *c)
 	machine_check_vector = winchip_machine_check;
 	wmb();
 	rdmsr(MSR_IDT_FCR1, lo, hi);
-	lo|= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
-	lo&= ~(1<<4);	/* Enable MCE */
+	lo |= (1<<2);	/* Enable EIERRINT (int 18 MCE) */
+	lo &= ~(1<<4);	/* Enable MCE */
 	wrmsr(MSR_IDT_FCR1, lo, hi);
 	set_in_cr4(X86_CR4_MCE);
 	printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 103d61a59b19..353efe4f5017 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -11,6 +11,7 @@
 #include <asm/cpufeature.h>
 #include <asm/processor-flags.h>
 #include <asm/tlbflush.h>
+#include <asm/pat.h>
 #include "mtrr.h"
 
 struct mtrr_state {
@@ -35,6 +36,8 @@ static struct fixed_range_block fixed_range_blocks[] = {
 
 static unsigned long smp_changes_mask;
 static struct mtrr_state mtrr_state = {};
+static int mtrr_state_set;
+static u64 tom2;
 
 #undef MODULE_PARAM_PREFIX
 #define MODULE_PARAM_PREFIX "mtrr."
@@ -42,6 +45,111 @@ static struct mtrr_state mtrr_state = {};
 static int mtrr_show;
 module_param_named(show, mtrr_show, bool, 0);
 
+/*
+ * Returns the effective MTRR type for the region
+ * Error returns:
+ * - 0xFE - when the range is "not entirely covered" by _any_ var range MTRR
+ * - 0xFF - when MTRR is not enabled
+ */
+u8 mtrr_type_lookup(u64 start, u64 end)
+{
+	int i;
+	u64 base, mask;
+	u8 prev_match, curr_match;
+
+	if (!mtrr_state_set)
+		return 0xFF;
+
+	if (!mtrr_state.enabled)
+		return 0xFF;
+
+	/* Make end inclusive end, instead of exclusive */
+	end--;
+
+	/* Look in fixed ranges. Just return the type as per start */
+	if (mtrr_state.have_fixed && (start < 0x100000)) {
+		int idx;
+
+		if (start < 0x80000) {
+			idx = 0;
+			idx += (start >> 16);
+			return mtrr_state.fixed_ranges[idx];
+		} else if (start < 0xC0000) {
+			idx = 1 * 8;
+			idx += ((start - 0x80000) >> 14);
+			return mtrr_state.fixed_ranges[idx];
+		} else if (start < 0x1000000) {
+			idx = 3 * 8;
+			idx += ((start - 0xC0000) >> 12);
+			return mtrr_state.fixed_ranges[idx];
+		}
+	}
+
+	/*
+	 * Look in variable ranges
+	 * Look of multiple ranges matching this address and pick type
+	 * as per MTRR precedence
+	 */
+	if (!mtrr_state.enabled & 2) {
+		return mtrr_state.def_type;
+	}
+
+	prev_match = 0xFF;
+	for (i = 0; i < num_var_ranges; ++i) {
+		unsigned short start_state, end_state;
+
+		if (!(mtrr_state.var_ranges[i].mask_lo & (1 << 11)))
+			continue;
+
+		base = (((u64)mtrr_state.var_ranges[i].base_hi) << 32) +
+		       (mtrr_state.var_ranges[i].base_lo & PAGE_MASK);
+		mask = (((u64)mtrr_state.var_ranges[i].mask_hi) << 32) +
+		       (mtrr_state.var_ranges[i].mask_lo & PAGE_MASK);
+
+		start_state = ((start & mask) == (base & mask));
+		end_state = ((end & mask) == (base & mask));
+		if (start_state != end_state)
+			return 0xFE;
+
+		if ((start & mask) != (base & mask)) {
+			continue;
+		}
+
+		curr_match = mtrr_state.var_ranges[i].base_lo & 0xff;
+		if (prev_match == 0xFF) {
+			prev_match = curr_match;
+			continue;
+		}
+
+		if (prev_match == MTRR_TYPE_UNCACHABLE ||
+		    curr_match == MTRR_TYPE_UNCACHABLE) {
+			return MTRR_TYPE_UNCACHABLE;
+		}
+
+		if ((prev_match == MTRR_TYPE_WRBACK &&
+		     curr_match == MTRR_TYPE_WRTHROUGH) ||
+		    (prev_match == MTRR_TYPE_WRTHROUGH &&
+		     curr_match == MTRR_TYPE_WRBACK)) {
+			prev_match = MTRR_TYPE_WRTHROUGH;
+			curr_match = MTRR_TYPE_WRTHROUGH;
+		}
+
+		if (prev_match != curr_match) {
+			return MTRR_TYPE_UNCACHABLE;
+		}
+	}
+
+	if (tom2) {
+		if (start >= (1ULL<<32) && (end < tom2))
+			return MTRR_TYPE_WRBACK;
+	}
+
+	if (prev_match != 0xFF)
+		return prev_match;
+
+	return mtrr_state.def_type;
+}
+
 /*  Get the MSR pair relating to a var range  */
 static void
 get_mtrr_var_range(unsigned int index, struct mtrr_var_range *vr)
@@ -79,12 +187,16 @@ static void print_fixed(unsigned base, unsigned step, const mtrr_type*types)
 			base, base + step - 1, mtrr_attrib_to_str(*types));
 }
 
+static void prepare_set(void);
+static void post_set(void);
+
 /*  Grab all of the MTRR state for this CPU into *state  */
 void __init get_mtrr_state(void)
 {
 	unsigned int i;
 	struct mtrr_var_range *vrs;
 	unsigned lo, dummy;
+	unsigned long flags;
 
 	vrs = mtrr_state.var_ranges;
 
@@ -100,6 +212,15 @@ void __init get_mtrr_state(void)
 	mtrr_state.def_type = (lo & 0xff);
 	mtrr_state.enabled = (lo & 0xc00) >> 10;
 
+	if (amd_special_default_mtrr()) {
+		unsigned lo, hi;
+		/* TOP_MEM2 */
+		rdmsr(MSR_K8_TOP_MEM2, lo, hi);
+		tom2 = hi;
+		tom2 <<= 32;
+		tom2 |= lo;
+		tom2 &= 0xffffff8000000ULL;
+	}
 	if (mtrr_show) {
 		int high_width;
 
@@ -130,7 +251,22 @@ void __init get_mtrr_state(void)
 			else
 				printk(KERN_INFO "MTRR %u disabled\n", i);
 		}
+		if (tom2) {
+			printk(KERN_INFO "TOM2: %016llx aka %lldM\n",
+					  tom2, tom2>>20);
+		}
 	}
+	mtrr_state_set = 1;
+
+	/* PAT setup for BP. We need to go through sync steps here */
+	local_irq_save(flags);
+	prepare_set();
+
+	pat_init();
+
+	post_set();
+	local_irq_restore(flags);
+
 }
 
 /*  Some BIOS's are fucked and don't set all MTRRs the same!  */
@@ -176,12 +312,13 @@ static inline void k8_enable_fixed_iorrs(void)
 }
 
 /**
- * Checks and updates an fixed-range MTRR if it differs from the value it
- * should have. If K8 extentions are wanted, update the K8 SYSCFG MSR also.
- * see AMD publication no. 24593, chapter 7.8.1, page 233 for more information
- * \param msr MSR address of the MTTR which should be checked and updated
- * \param changed pointer which indicates whether the MTRR needed to be changed
- * \param msrwords pointer to the MSR values which the MSR should have
+ * set_fixed_range - checks & updates a fixed-range MTRR if it differs from the value it should have
+ * @msr: MSR address of the MTTR which should be checked and updated
+ * @changed: pointer which indicates whether the MTRR needed to be changed
+ * @msrwords: pointer to the MSR values which the MSR should have
+ *
+ * If K8 extentions are wanted, update the K8 SYSCFG MSR also.
+ * See AMD publication no. 24593, chapter 7.8.1, page 233 for more information.
  */
 static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 {
@@ -199,12 +336,15 @@ static void set_fixed_range(int msr, bool *changed, unsigned int *msrwords)
 	}
 }
 
+/**
+ * generic_get_free_region - Get a free MTRR.
+ * @base: The starting (base) address of the region.
+ * @size: The size (in bytes) of the region.
+ * @replace_reg: mtrr index to be replaced; set to invalid value if none.
+ *
+ * Returns: The index of the region on success, else negative on error.
+ */
 int generic_get_free_region(unsigned long base, unsigned long size, int replace_reg)
-/*  [SUMMARY] Get a free MTRR.
-    <base> The starting (base) address of the region.
-    <size> The size (in bytes) of the region.
-    [RETURNS] The index of the region on success, else -1 on error.
-*/
 {
 	int i, max;
 	mtrr_type ltype;
@@ -249,8 +389,8 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 }
 
 /**
- * Checks and updates the fixed-range MTRRs if they differ from the saved set
- * \param frs pointer to fixed-range MTRR values, saved by get_fixed_ranges()
+ * set_fixed_ranges - checks & updates the fixed-range MTRRs if they differ from the saved set
+ * @frs: pointer to fixed-range MTRR values, saved by get_fixed_ranges()
  */
 static int set_fixed_ranges(mtrr_type * frs)
 {
@@ -294,13 +434,13 @@ static bool set_mtrr_var_ranges(unsigned int index, struct mtrr_var_range *vr)
 
 static u32 deftype_lo, deftype_hi;
 
+/**
+ * set_mtrr_state - Set the MTRR state for this CPU.
+ *
+ * NOTE: The CPU must already be in a safe state for MTRR changes.
+ * RETURNS: 0 if no changes made, else a mask indicating what was changed.
+ */
 static unsigned long set_mtrr_state(void)
-/*  [SUMMARY] Set the MTRR state for this CPU.
-    <state> The MTRR state information to read.
-    <ctxt> Some relevant CPU context.
-    [NOTE] The CPU must already be in a safe state for MTRR changes.
-    [RETURNS] 0 if no changes made, else a mask indication what was changed.
-*/
 {
 	unsigned int i;
 	unsigned long change_mask = 0;
@@ -393,6 +533,9 @@ static void generic_set_all(void)
 	/* Actually set the state */
 	mask = set_mtrr_state();
 
+	/* also set PAT */
+	pat_init();
+
 	post_set();
 	local_irq_restore(flags);
 
diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c
index 91e150acb46c..1960f1985e5e 100644
--- a/arch/x86/kernel/cpu/mtrr/if.c
+++ b/arch/x86/kernel/cpu/mtrr/if.c
@@ -424,11 +424,10 @@ static int __init mtrr_if_init(void)
 		return -ENODEV;
 
 	proc_root_mtrr =
-	    create_proc_entry("mtrr", S_IWUSR | S_IRUGO, &proc_root);
-	if (proc_root_mtrr) {
+		proc_create("mtrr", S_IWUSR | S_IRUGO, &proc_root, &mtrr_fops);
+
+	if (proc_root_mtrr)
 		proc_root_mtrr->owner = THIS_MODULE;
-		proc_root_mtrr->proc_fops = &mtrr_fops;
-	}
 	return 0;
 }
 
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index be83336fddba..6a1e278d9323 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -627,7 +627,7 @@ early_param("disable_mtrr_trim", disable_mtrr_trim_setup);
 #define Tom2Enabled (1U << 21)
 #define Tom2ForceMemTypeWB (1U << 22)
 
-static __init int amd_special_default_mtrr(void)
+int __init amd_special_default_mtrr(void)
 {
 	u32 l, h;
 
@@ -711,7 +711,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 		trim_size = end_pfn;
 		trim_size <<= PAGE_SHIFT;
 		trim_size -= trim_start;
-		add_memory_region(trim_start, trim_size, E820_RESERVED);
+		update_memory_range(trim_start, trim_size, E820_RAM,
+					E820_RESERVED);
 		update_e820();
 		return 1;
 	}
diff --git a/arch/x86/kernel/cpu/mtrr/state.c b/arch/x86/kernel/cpu/mtrr/state.c
index 9f8ba923d1c9..7f7e2753685b 100644
--- a/arch/x86/kernel/cpu/mtrr/state.c
+++ b/arch/x86/kernel/cpu/mtrr/state.c
@@ -19,13 +19,15 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 	if (use_intel() || is_cpu(CYRIX)) {
 
 		/*  Save value of CR4 and clear Page Global Enable (bit 7)  */
-		if ( cpu_has_pge ) {
+		if (cpu_has_pge) {
 			ctxt->cr4val = read_cr4();
 			write_cr4(ctxt->cr4val & ~X86_CR4_PGE);
 		}
 
-		/*  Disable and flush caches. Note that wbinvd flushes the TLBs as
-		    a side-effect  */
+		/*
+		 * Disable and flush caches. Note that wbinvd flushes the TLBs
+		 * as a side-effect
+		 */
 		cr0 = read_cr0() | X86_CR0_CD;
 		wbinvd();
 		write_cr0(cr0);
@@ -42,7 +44,7 @@ void set_mtrr_prepare_save(struct set_mtrr_context *ctxt)
 
 void set_mtrr_cache_disable(struct set_mtrr_context *ctxt)
 {
-	if (use_intel()) 
+	if (use_intel())
 		/*  Disable MTRRs, and set the default type to uncached  */
 		mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
 		      ctxt->deftype_hi);
@@ -66,12 +68,12 @@ void set_mtrr_done(struct set_mtrr_context *ctxt)
 		else
 			/* Cyrix ARRs - everything else was excluded at the top */
 			setCx86(CX86_CCR3, ctxt->ccr3);
-		
+
 		/*  Enable caches  */
 		write_cr0(read_cr0() & 0xbfffffff);
 
 		/*  Restore value of CR4  */
-		if ( cpu_has_pge )
+		if (cpu_has_pge)
 			write_cr4(ctxt->cr4val);
 	}
 	/*  Re-enable interrupts locally (if enabled previously)  */
diff --git a/arch/x86/kernel/cpu/nexgen.c b/arch/x86/kernel/cpu/nexgen.c
index 961fbe1a748f..5d5e1c134123 100644
--- a/arch/x86/kernel/cpu/nexgen.c
+++ b/arch/x86/kernel/cpu/nexgen.c
@@ -9,11 +9,11 @@
  *	Detect a NexGen CPU running without BIOS hypercode new enough
  *	to have CPUID. (Thanks to Herbert Oppmann)
  */
- 
+
 static int __cpuinit deep_magic_nexgen_probe(void)
 {
 	int ret;
-	
+
 	__asm__ __volatile__ (
 		"	movw	$0x5555, %%ax\n"
 		"	xorw	%%dx,%%dx\n"
@@ -22,22 +22,21 @@ static int __cpuinit deep_magic_nexgen_probe(void)
 		"	movl	$0, %%eax\n"
 		"	jnz	1f\n"
 		"	movl	$1, %%eax\n"
-		"1:\n" 
-		: "=a" (ret) : : "cx", "dx" );
+		"1:\n"
+		: "=a" (ret) : : "cx", "dx");
 	return  ret;
 }
 
-static void __cpuinit init_nexgen(struct cpuinfo_x86 * c)
+static void __cpuinit init_nexgen(struct cpuinfo_x86 *c)
 {
 	c->x86_cache_size = 256; /* A few had 1 MB... */
 }
 
-static void __cpuinit nexgen_identify(struct cpuinfo_x86 * c)
+static void __cpuinit nexgen_identify(struct cpuinfo_x86 *c)
 {
 	/* Detect NexGen with old hypercode */
-	if ( deep_magic_nexgen_probe() ) {
+	if (deep_magic_nexgen_probe())
 		strcpy(c->x86_vendor_id, "NexGenDriven");
-	}
 }
 
 static struct cpu_dev nexgen_cpu_dev __cpuinitdata = {
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 9b838324b818..b943e10ad814 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -652,9 +652,6 @@ static void probe_nmi_watchdog(void)
 			wd_ops = &p6_wd_ops;
 			break;
 		case 15:
-			if (boot_cpu_data.x86_model > 0x4)
-				return;
-
 			wd_ops = &p4_wd_ops;
 			break;
 		default:
@@ -670,8 +667,10 @@ int lapic_watchdog_init(unsigned nmi_hz)
 {
 	if (!wd_ops) {
 		probe_nmi_watchdog();
-		if (!wd_ops)
+		if (!wd_ops) {
+			printk(KERN_INFO "NMI watchdog: CPU not supported\n");
 			return -1;
+		}
 
 		if (!wd_ops->reserve()) {
 			printk(KERN_ERR
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index af11d31dce0a..0d0d9057e7c0 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -1,85 +1,145 @@
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/string.h>
-#include <asm/semaphore.h>
 #include <linux/seq_file.h>
 #include <linux/cpufreq.h>
 
 /*
  *	Get CPU information for use by the procfs.
  */
+#ifdef CONFIG_X86_32
+static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
+			      unsigned int cpu)
+{
+#ifdef CONFIG_X86_HT
+	if (c->x86_max_cores * smp_num_siblings > 1) {
+		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+		seq_printf(m, "siblings\t: %d\n",
+			   cpus_weight(per_cpu(cpu_core_map, cpu)));
+		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+		seq_printf(m, "apicid\t\t: %d\n", c->apicid);
+		seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
+	}
+#endif
+}
+
+static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
+{
+	/*
+	 * We use exception 16 if we have hardware math and we've either seen
+	 * it or the CPU claims it is internal
+	 */
+	int fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
+	seq_printf(m,
+		   "fdiv_bug\t: %s\n"
+		   "hlt_bug\t\t: %s\n"
+		   "f00f_bug\t: %s\n"
+		   "coma_bug\t: %s\n"
+		   "fpu\t\t: %s\n"
+		   "fpu_exception\t: %s\n"
+		   "cpuid level\t: %d\n"
+		   "wp\t\t: %s\n",
+		   c->fdiv_bug ? "yes" : "no",
+		   c->hlt_works_ok ? "no" : "yes",
+		   c->f00f_bug ? "yes" : "no",
+		   c->coma_bug ? "yes" : "no",
+		   c->hard_math ? "yes" : "no",
+		   fpu_exception ? "yes" : "no",
+		   c->cpuid_level,
+		   c->wp_works_ok ? "yes" : "no");
+}
+#else
+static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
+			      unsigned int cpu)
+{
+#ifdef CONFIG_SMP
+	if (c->x86_max_cores * smp_num_siblings > 1) {
+		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
+		seq_printf(m, "siblings\t: %d\n",
+			   cpus_weight(per_cpu(cpu_core_map, cpu)));
+		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
+		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
+		seq_printf(m, "apicid\t\t: %d\n", c->apicid);
+		seq_printf(m, "initial apicid\t: %d\n", c->initial_apicid);
+	}
+#endif
+}
+
+static void show_cpuinfo_misc(struct seq_file *m, struct cpuinfo_x86 *c)
+{
+	seq_printf(m,
+		   "fpu\t\t: yes\n"
+		   "fpu_exception\t: yes\n"
+		   "cpuid level\t: %d\n"
+		   "wp\t\t: yes\n",
+		   c->cpuid_level);
+}
+#endif
+
 static int show_cpuinfo(struct seq_file *m, void *v)
 {
 	struct cpuinfo_x86 *c = v;
-	int i, n = 0;
-	int fpu_exception;
+	unsigned int cpu = 0;
+	int i;
 
 #ifdef CONFIG_SMP
-	n = c->cpu_index;
+	cpu = c->cpu_index;
 #endif
-	seq_printf(m, "processor\t: %d\n"
-		"vendor_id\t: %s\n"
-		"cpu family\t: %d\n"
-		"model\t\t: %d\n"
-		"model name\t: %s\n",
-		n,
-		c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
-		c->x86,
-		c->x86_model,
-		c->x86_model_id[0] ? c->x86_model_id : "unknown");
+	seq_printf(m, "processor\t: %u\n"
+		   "vendor_id\t: %s\n"
+		   "cpu family\t: %d\n"
+		   "model\t\t: %u\n"
+		   "model name\t: %s\n",
+		   cpu,
+		   c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
+		   c->x86,
+		   c->x86_model,
+		   c->x86_model_id[0] ? c->x86_model_id : "unknown");
 
 	if (c->x86_mask || c->cpuid_level >= 0)
 		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
 	else
 		seq_printf(m, "stepping\t: unknown\n");
 
-	if ( cpu_has(c, X86_FEATURE_TSC) ) {
-		unsigned int freq = cpufreq_quick_get(n);
+	if (cpu_has(c, X86_FEATURE_TSC)) {
+		unsigned int freq = cpufreq_quick_get(cpu);
+
 		if (!freq)
 			freq = cpu_khz;
 		seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
-			freq / 1000, (freq % 1000));
+			   freq / 1000, (freq % 1000));
 	}
 
 	/* Cache size */
 	if (c->x86_cache_size >= 0)
 		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-#ifdef CONFIG_X86_HT
-	if (c->x86_max_cores * smp_num_siblings > 1) {
-		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
-		seq_printf(m, "siblings\t: %d\n",
-				cpus_weight(per_cpu(cpu_core_map, n)));
-		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
-		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
-	}
-#endif
-	
-	/* We use exception 16 if we have hardware math and we've either seen it or the CPU claims it is internal */
-	fpu_exception = c->hard_math && (ignore_fpu_irq || cpu_has_fpu);
-	seq_printf(m, "fdiv_bug\t: %s\n"
-			"hlt_bug\t\t: %s\n"
-			"f00f_bug\t: %s\n"
-			"coma_bug\t: %s\n"
-			"fpu\t\t: %s\n"
-			"fpu_exception\t: %s\n"
-			"cpuid level\t: %d\n"
-			"wp\t\t: %s\n"
-			"flags\t\t:",
-		     c->fdiv_bug ? "yes" : "no",
-		     c->hlt_works_ok ? "no" : "yes",
-		     c->f00f_bug ? "yes" : "no",
-		     c->coma_bug ? "yes" : "no",
-		     c->hard_math ? "yes" : "no",
-		     fpu_exception ? "yes" : "no",
-		     c->cpuid_level,
-		     c->wp_works_ok ? "yes" : "no");
-
-	for ( i = 0 ; i < 32*NCAPINTS ; i++ )
-		if ( test_bit(i, c->x86_capability) &&
-		     x86_cap_flags[i] != NULL )
+
+	show_cpuinfo_core(m, c, cpu);
+	show_cpuinfo_misc(m, c);
+
+	seq_printf(m, "flags\t\t:");
+	for (i = 0; i < 32*NCAPINTS; i++)
+		if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
 			seq_printf(m, " %s", x86_cap_flags[i]);
 
-	for (i = 0; i < 32; i++)
+	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
+		   c->loops_per_jiffy/(500000/HZ),
+		   (c->loops_per_jiffy/(5000/HZ)) % 100);
+
+#ifdef CONFIG_X86_64
+	if (c->x86_tlbsize > 0)
+		seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
+#endif
+	seq_printf(m, "clflush size\t: %u\n", c->x86_clflush_size);
+#ifdef CONFIG_X86_64
+	seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
+	seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
+		   c->x86_phys_bits, c->x86_virt_bits);
+#endif
+
+	seq_printf(m, "power management:");
+	for (i = 0; i < 32; i++) {
 		if (c->x86_power & (1 << i)) {
 			if (i < ARRAY_SIZE(x86_power_flags) &&
 			    x86_power_flags[i])
@@ -89,11 +149,9 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 			else
 				seq_printf(m, " [%d]", i);
 		}
+	}
 
-	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
-		     c->loops_per_jiffy/(500000/HZ),
-		     (c->loops_per_jiffy/(5000/HZ)) % 100);
-	seq_printf(m, "clflush size\t: %u\n\n", c->x86_clflush_size);
+	seq_printf(m, "\n\n");
 
 	return 0;
 }
@@ -106,14 +164,17 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 		return &cpu_data(*pos);
 	return NULL;
 }
+
 static void *c_next(struct seq_file *m, void *v, loff_t *pos)
 {
 	*pos = next_cpu(*pos, cpu_online_map);
 	return c_start(m, pos);
 }
+
 static void c_stop(struct seq_file *m, void *v)
 {
 }
+
 const struct seq_operations cpuinfo_op = {
 	.start	= c_start,
 	.next	= c_next,
diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c
index e8b422c1c512..b911a2c61b8f 100644
--- a/arch/x86/kernel/cpu/transmeta.c
+++ b/arch/x86/kernel/cpu/transmeta.c
@@ -18,8 +18,8 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 	/* Print CMS and CPU revision */
 	max = cpuid_eax(0x80860000);
 	cpu_rev = 0;
-	if ( max >= 0x80860001 ) {
-		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags); 
+	if (max >= 0x80860001) {
+		cpuid(0x80860001, &dummy, &cpu_rev, &cpu_freq, &cpu_flags);
 		if (cpu_rev != 0x02000000) {
 			printk(KERN_INFO "CPU: Processor revision %u.%u.%u.%u, %u MHz\n",
 				(cpu_rev >> 24) & 0xff,
@@ -29,7 +29,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 				cpu_freq);
 		}
 	}
-	if ( max >= 0x80860002 ) {
+	if (max >= 0x80860002) {
 		cpuid(0x80860002, &new_cpu_rev, &cms_rev1, &cms_rev2, &dummy);
 		if (cpu_rev == 0x02000000) {
 			printk(KERN_INFO "CPU: Processor revision %08X, %u MHz\n",
@@ -42,7 +42,7 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 		       cms_rev1 & 0xff,
 		       cms_rev2);
 	}
-	if ( max >= 0x80860006 ) {
+	if (max >= 0x80860006) {
 		cpuid(0x80860003,
 		      (void *)&cpu_info[0],
 		      (void *)&cpu_info[4],
@@ -74,23 +74,25 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c)
 	wrmsr(0x80860004, cap_mask, uk);
 
 	/* All Transmeta CPUs have a constant TSC */
-	set_bit(X86_FEATURE_CONSTANT_TSC, c->x86_capability);
-	
+	set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
 #ifdef CONFIG_SYSCTL
-	/* randomize_va_space slows us down enormously;
-	   it probably triggers retranslation of x86->native bytecode */
+	/*
+	 * randomize_va_space slows us down enormously;
+	 * it probably triggers retranslation of x86->native bytecode
+	 */
 	randomize_va_space = 0;
 #endif
 }
 
-static void __cpuinit transmeta_identify(struct cpuinfo_x86 * c)
+static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c)
 {
 	u32 xlvl;
 
 	/* Transmeta-defined flags: level 0x80860001 */
 	xlvl = cpuid_eax(0x80860000);
-	if ( (xlvl & 0xffff0000) == 0x80860000 ) {
-		if (  xlvl >= 0x80860001 )
+	if ((xlvl & 0xffff0000) == 0x80860000) {
+		if (xlvl >= 0x80860001)
 			c->x86_capability[2] = cpuid_edx(0x80860001);
 	}
 }
@@ -102,8 +104,4 @@ static struct cpu_dev transmeta_cpu_dev __cpuinitdata = {
 	.c_identify	= transmeta_identify,
 };
 
-int __init transmeta_init_cpu(void)
-{
-	cpu_devs[X86_VENDOR_TRANSMETA] = &transmeta_cpu_dev;
-	return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev);
diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c
index a7a4e75bdcd7..b1fc90989d75 100644
--- a/arch/x86/kernel/cpu/umc.c
+++ b/arch/x86/kernel/cpu/umc.c
@@ -3,24 +3,23 @@
 #include <asm/processor.h>
 #include "cpu.h"
 
-/* UMC chips appear to be only either 386 or 486, so no special init takes place.
+/*
+ * UMC chips appear to be only either 386 or 486,
+ * so no special init takes place.
  */
 
 static struct cpu_dev umc_cpu_dev __cpuinitdata = {
 	.c_vendor	= "UMC",
-	.c_ident 	= { "UMC UMC UMC" },
+	.c_ident	= { "UMC UMC UMC" },
 	.c_models = {
 		{ .vendor = X86_VENDOR_UMC, .family = 4, .model_names =
-		  { 
-			  [1] = "U5D", 
-			  [2] = "U5S", 
+		  {
+			  [1] = "U5D",
+			  [2] = "U5S",
 		  }
 		},
 	},
 };
 
-int __init umc_init_cpu(void)
-{
-	cpu_devs[X86_VENDOR_UMC] = &umc_cpu_dev;
-	return 0;
-}
+cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev);
+
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 288e7a6598ac..daff52a62248 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -154,12 +154,10 @@ static int __cpuinit cpuid_class_cpu_callback(struct notifier_block *nfb,
 		err = cpuid_device_create(cpu);
 		break;
 	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 		cpuid_device_destroy(cpu);
 		break;
-	case CPU_UP_CANCELED_FROZEN:
-		destroy_suspended_device(cpuid_class, MKDEV(CPUID_MAJOR, cpu));
-		break;
 	}
 	return err ? NOTIFY_BAD : NOTIFY_OK;
 }
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 9a5fa0abfcc7..2251d0ae9570 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -26,11 +26,7 @@
 #include <linux/kdebug.h>
 #include <asm/smp.h>
 
-#ifdef CONFIG_X86_32
 #include <mach_ipi.h>
-#else
-#include <asm/mach_apic.h>
-#endif
 
 /* This keeps a track of which one is crashing cpu. */
 static int crashing_cpu;
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index dcd918c1580d..11c11b8ec48d 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -220,11 +220,11 @@ int ds_allocate(void **dsp, size_t bts_size_in_bytes)
 
 int ds_free(void **dsp)
 {
-	if (*dsp)
+	if (*dsp) {
 		kfree((void *)get_bts_buffer_base(*dsp));
-	kfree(*dsp);
-	*dsp = NULL;
-
+		kfree(*dsp);
+		*dsp = NULL;
+	}
 	return 0;
 }
 
diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
index 4e16ef4a2659..ed733e7cf4e6 100644
--- a/arch/x86/kernel/e820_32.c
+++ b/arch/x86/kernel/e820_32.c
@@ -450,45 +450,32 @@ int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
  * thinkpad 560x, for example, does not cooperate with the memory
  * detection code.)
  */
-int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
+int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
 {
 	/* Only one memory region (or negative)? Ignore it */
 	if (nr_map < 2)
 		return -1;
 
 	do {
-		unsigned long long start = biosmap->addr;
-		unsigned long long size = biosmap->size;
-		unsigned long long end = start + size;
-		unsigned long type = biosmap->type;
+		u64 start = biosmap->addr;
+		u64 size = biosmap->size;
+		u64 end = start + size;
+		u32 type = biosmap->type;
 
 		/* Overflow in 64 bits? Ignore the memory map. */
 		if (start > end)
 			return -1;
 
-		/*
-		 * Some BIOSes claim RAM in the 640k - 1M region.
-		 * Not right. Fix it up.
-		 */
-		if (type == E820_RAM) {
-			if (start < 0x100000ULL && end > 0xA0000ULL) {
-				if (start < 0xA0000ULL)
-					add_memory_region(start, 0xA0000ULL-start, type);
-				if (end <= 0x100000ULL)
-					continue;
-				start = 0x100000ULL;
-				size = end - start;
-			}
-		}
 		add_memory_region(start, size, type);
-	} while (biosmap++,--nr_map);
+	} while (biosmap++, --nr_map);
+
 	return 0;
 }
 
 /*
  * Find the highest page frame number we have available
  */
-void __init find_max_pfn(void)
+void __init propagate_e820_map(void)
 {
 	int i;
 
@@ -717,7 +704,7 @@ static int __init parse_memmap(char *arg)
 		 * size before original memory map is
 		 * reset.
 		 */
-		find_max_pfn();
+		propagate_e820_map();
 		saved_max_pfn = max_pfn;
 #endif
 		e820.nr_map = 0;
@@ -749,6 +736,32 @@ static int __init parse_memmap(char *arg)
 	return 0;
 }
 early_param("memmap", parse_memmap);
+void __init update_memory_range(u64 start, u64 size, unsigned old_type,
+				unsigned new_type)
+{
+	int i;
+
+	BUG_ON(old_type == new_type);
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 final_start, final_end;
+		if (ei->type != old_type)
+			continue;
+		/* totally covered? */
+		if (ei->addr >= start && ei->size <= size) {
+			ei->type = new_type;
+			continue;
+		}
+		/* partially covered */
+		final_start = max(start, ei->addr);
+		final_end = min(start + size, ei->addr + ei->size);
+		if (final_start >= final_end)
+			continue;
+		add_memory_region(final_start, final_end - final_start,
+					 new_type);
+	}
+}
 void __init update_e820(void)
 {
 	u8 nr_map;
diff --git a/arch/x86/kernel/e820_64.c b/arch/x86/kernel/e820_64.c
index 9f65b4cc323c..cbd42e51cb08 100644
--- a/arch/x86/kernel/e820_64.c
+++ b/arch/x86/kernel/e820_64.c
@@ -27,6 +27,7 @@
 #include <asm/setup.h>
 #include <asm/sections.h>
 #include <asm/kdebug.h>
+#include <asm/trampoline.h>
 
 struct e820map e820;
 
@@ -36,11 +37,11 @@ struct e820map e820;
 unsigned long end_pfn;
 
 /*
- * end_pfn only includes RAM, while end_pfn_map includes all e820 entries.
- * The direct mapping extends to end_pfn_map, so that we can directly access
+ * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
+ * The direct mapping extends to max_pfn_mapped, so that we can directly access
  * apertures, ACPI and other tables without having to play with fixmaps.
  */
-unsigned long end_pfn_map;
+unsigned long max_pfn_mapped;
 
 /*
  * Last pfn which the user wants to use.
@@ -58,8 +59,8 @@ struct early_res {
 };
 static struct early_res early_res[MAX_EARLY_RES] __initdata = {
 	{ 0, PAGE_SIZE, "BIOS data page" },			/* BIOS data page */
-#ifdef CONFIG_SMP
-	{ SMP_TRAMPOLINE_BASE, SMP_TRAMPOLINE_BASE + 2*PAGE_SIZE, "SMP_TRAMPOLINE" },
+#ifdef CONFIG_X86_TRAMPOLINE
+	{ TRAMPOLINE_BASE, TRAMPOLINE_BASE + 2 * PAGE_SIZE, "TRAMPOLINE" },
 #endif
 	{}
 };
@@ -95,7 +96,8 @@ void __init early_res_to_bootmem(void)
 }
 
 /* Check for already reserved areas */
-static inline int bad_addr(unsigned long *addrp, unsigned long size)
+static inline int __init
+bad_addr(unsigned long *addrp, unsigned long size, unsigned long align)
 {
 	int i;
 	unsigned long addr = *addrp, last;
@@ -105,7 +107,7 @@ again:
 	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
 		struct early_res *r = &early_res[i];
 		if (last >= r->start && addr < r->end) {
-			*addrp = addr = r->end;
+			*addrp = addr = round_up(r->end, align);
 			changed = 1;
 			goto again;
 		}
@@ -113,6 +115,40 @@ again:
 	return changed;
 }
 
+/* Check for already reserved areas */
+static inline int __init
+bad_addr_size(unsigned long *addrp, unsigned long *sizep, unsigned long align)
+{
+	int i;
+	unsigned long addr = *addrp, last;
+	unsigned long size = *sizep;
+	int changed = 0;
+again:
+	last = addr + size;
+	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++) {
+		struct early_res *r = &early_res[i];
+		if (last > r->start && addr < r->start) {
+			size = r->start - addr;
+			changed = 1;
+			goto again;
+		}
+		if (last > r->end && addr < r->end) {
+			addr = round_up(r->end, align);
+			size = last - addr;
+			changed = 1;
+			goto again;
+		}
+		if (last <= r->end && addr >= r->start) {
+			(*sizep)++;
+			return 0;
+		}
+	}
+	if (changed) {
+		*addrp = addr;
+		*sizep = size;
+	}
+	return changed;
+}
 /*
  * This function checks if any part of the range <start,end> is mapped
  * with type.
@@ -174,26 +210,27 @@ int __init e820_all_mapped(unsigned long start, unsigned long end,
  * Find a free area with specified alignment in a specific range.
  */
 unsigned long __init find_e820_area(unsigned long start, unsigned long end,
-				    unsigned size, unsigned long align)
+				    unsigned long size, unsigned long align)
 {
 	int i;
-	unsigned long mask = ~(align - 1);
 
 	for (i = 0; i < e820.nr_map; i++) {
 		struct e820entry *ei = &e820.map[i];
-		unsigned long addr = ei->addr, last;
+		unsigned long addr, last;
+		unsigned long ei_last;
 
 		if (ei->type != E820_RAM)
 			continue;
+		addr = round_up(ei->addr, align);
+		ei_last = ei->addr + ei->size;
 		if (addr < start)
-			addr = start;
-		if (addr > ei->addr + ei->size)
+			addr = round_up(start, align);
+		if (addr >= ei_last)
 			continue;
-		while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size)
+		while (bad_addr(&addr, size, align) && addr+size <= ei_last)
 			;
-		addr = (addr + align - 1) & mask;
 		last = addr + size;
-		if (last > ei->addr + ei->size)
+		if (last > ei_last)
 			continue;
 		if (last > end)
 			continue;
@@ -203,6 +240,40 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end,
 }
 
 /*
+ * Find next free range after *start
+ */
+unsigned long __init find_e820_area_size(unsigned long start,
+					 unsigned long *sizep,
+					 unsigned long align)
+{
+	int i;
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		unsigned long addr, last;
+		unsigned long ei_last;
+
+		if (ei->type != E820_RAM)
+			continue;
+		addr = round_up(ei->addr, align);
+		ei_last = ei->addr + ei->size;
+		if (addr < start)
+			addr = round_up(start, align);
+		if (addr >= ei_last)
+			continue;
+		*sizep = ei_last - addr;
+		while (bad_addr_size(&addr, sizep, align) &&
+			addr + *sizep <= ei_last)
+			;
+		last = addr + *sizep;
+		if (last > ei_last)
+			continue;
+		return addr;
+	}
+	return -1UL;
+
+}
+/*
  * Find the highest page frame number we have available
  */
 unsigned long __init e820_end_of_ram(void)
@@ -211,29 +282,29 @@ unsigned long __init e820_end_of_ram(void)
 
 	end_pfn = find_max_pfn_with_active_regions();
 
-	if (end_pfn > end_pfn_map)
-		end_pfn_map = end_pfn;
-	if (end_pfn_map > MAXMEM>>PAGE_SHIFT)
-		end_pfn_map = MAXMEM>>PAGE_SHIFT;
+	if (end_pfn > max_pfn_mapped)
+		max_pfn_mapped = end_pfn;
+	if (max_pfn_mapped > MAXMEM>>PAGE_SHIFT)
+		max_pfn_mapped = MAXMEM>>PAGE_SHIFT;
 	if (end_pfn > end_user_pfn)
 		end_pfn = end_user_pfn;
-	if (end_pfn > end_pfn_map)
-		end_pfn = end_pfn_map;
+	if (end_pfn > max_pfn_mapped)
+		end_pfn = max_pfn_mapped;
 
-	printk(KERN_INFO "end_pfn_map = %lu\n", end_pfn_map);
+	printk(KERN_INFO "max_pfn_mapped = %lu\n", max_pfn_mapped);
 	return end_pfn;
 }
 
 /*
  * Mark e820 reserved areas as busy for the resource manager.
  */
-void __init e820_reserve_resources(struct resource *code_resource,
-		struct resource *data_resource, struct resource *bss_resource)
+void __init e820_reserve_resources(void)
 {
 	int i;
+	struct resource *res;
+
+	res = alloc_bootmem_low(sizeof(struct resource) * e820.nr_map);
 	for (i = 0; i < e820.nr_map; i++) {
-		struct resource *res;
-		res = alloc_bootmem_low(sizeof(struct resource));
 		switch (e820.map[i].type) {
 		case E820_RAM:	res->name = "System RAM"; break;
 		case E820_ACPI:	res->name = "ACPI Tables"; break;
@@ -243,21 +314,8 @@ void __init e820_reserve_resources(struct resource *code_resource,
 		res->start = e820.map[i].addr;
 		res->end = res->start + e820.map[i].size - 1;
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		request_resource(&iomem_resource, res);
-		if (e820.map[i].type == E820_RAM) {
-			/*
-			 * We don't know which RAM region contains kernel data,
-			 * so we try it repeatedly and let the resource manager
-			 * test it.
-			 */
-			request_resource(res, code_resource);
-			request_resource(res, data_resource);
-			request_resource(res, bss_resource);
-#ifdef CONFIG_KEXEC
-			if (crashk_res.start != crashk_res.end)
-				request_resource(res, &crashk_res);
-#endif
-		}
+		insert_resource(&iomem_resource, res);
+		res++;
 	}
 }
 
@@ -309,9 +367,9 @@ static int __init e820_find_active_region(const struct e820entry *ei,
 	if (*ei_startpfn >= *ei_endpfn)
 		return 0;
 
-	/* Check if end_pfn_map should be updated */
-	if (ei->type != E820_RAM && *ei_endpfn > end_pfn_map)
-		end_pfn_map = *ei_endpfn;
+	/* Check if max_pfn_mapped should be updated */
+	if (ei->type != E820_RAM && *ei_endpfn > max_pfn_mapped)
+		max_pfn_mapped = *ei_endpfn;
 
 	/* Skip if map is outside the node */
 	if (ei->type != E820_RAM || *ei_endpfn <= start_pfn ||
@@ -634,10 +692,10 @@ static int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
 		return -1;
 
 	do {
-		unsigned long start = biosmap->addr;
-		unsigned long size = biosmap->size;
-		unsigned long end = start + size;
-		unsigned long type = biosmap->type;
+		u64 start = biosmap->addr;
+		u64 size = biosmap->size;
+		u64 end = start + size;
+		u32 type = biosmap->type;
 
 		/* Overflow in 64 bits? Ignore the memory map. */
 		if (start > end)
@@ -702,7 +760,7 @@ static int __init parse_memmap_opt(char *p)
 		saved_max_pfn = e820_end_of_ram();
 		remove_all_active_ranges();
 #endif
-		end_pfn_map = 0;
+		max_pfn_mapped = 0;
 		e820.nr_map = 0;
 		userdef = 1;
 		return 0;
@@ -744,6 +802,33 @@ void __init finish_e820_parsing(void)
 	}
 }
 
+void __init update_memory_range(u64 start, u64 size, unsigned old_type,
+				unsigned new_type)
+{
+	int i;
+
+	BUG_ON(old_type == new_type);
+
+	for (i = 0; i < e820.nr_map; i++) {
+		struct e820entry *ei = &e820.map[i];
+		u64 final_start, final_end;
+		if (ei->type != old_type)
+			continue;
+		/* totally covered? */
+		if (ei->addr >= start && ei->size <= size) {
+			ei->type = new_type;
+			continue;
+		}
+		/* partially covered */
+		final_start = max(start, ei->addr);
+		final_end = min(start + size, ei->addr + ei->size);
+		if (final_start >= final_end)
+			continue;
+		add_memory_region(final_start, final_end - final_start,
+					 new_type);
+	}
+}
+
 void __init update_e820(void)
 {
 	u8 nr_map;
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index cff84cd9987f..643fd861b724 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -13,7 +13,7 @@
 #define VGABASE		(__ISA_IO_base + 0xb8000)
 
 static int max_ypos = 25, max_xpos = 80;
-static int current_ypos = 25, current_xpos = 0;
+static int current_ypos = 25, current_xpos;
 
 static void early_vga_write(struct console *con, const char *str, unsigned n)
 {
@@ -108,12 +108,12 @@ static __init void early_serial_init(char *s)
 
 	if (*s) {
 		unsigned port;
-		if (!strncmp(s,"0x",2)) {
+		if (!strncmp(s, "0x", 2)) {
 			early_serial_base = simple_strtoul(s, &e, 16);
 		} else {
 			static int bases[] = { 0x3f8, 0x2f8 };
 
-			if (!strncmp(s,"ttyS",4))
+			if (!strncmp(s, "ttyS", 4))
 				s += 4;
 			port = simple_strtoul(s, &e, 10);
 			if (port > 1 || s == e)
@@ -194,7 +194,7 @@ static struct console simnow_console = {
 
 /* Direct interface for emergencies */
 static struct console *early_console = &early_vga_console;
-static int early_console_initialized = 0;
+static int early_console_initialized;
 
 void early_printk(const char *fmt, ...)
 {
@@ -202,9 +202,9 @@ void early_printk(const char *fmt, ...)
 	int n;
 	va_list ap;
 
-	va_start(ap,fmt);
-	n = vscnprintf(buf,512,fmt,ap);
-	early_console->write(early_console,buf,n);
+	va_start(ap, fmt);
+	n = vscnprintf(buf, 512, fmt, ap);
+	early_console->write(early_console, buf, n);
 	va_end(ap);
 }
 
@@ -229,15 +229,15 @@ static int __init setup_early_printk(char *buf)
 		early_serial_init(buf);
 		early_console = &early_serial_console;
 	} else if (!strncmp(buf, "vga", 3)
-	           && boot_params.screen_info.orig_video_isVGA == 1) {
+		&& boot_params.screen_info.orig_video_isVGA == 1) {
 		max_xpos = boot_params.screen_info.orig_video_cols;
 		max_ypos = boot_params.screen_info.orig_video_lines;
 		current_ypos = boot_params.screen_info.orig_y;
 		early_console = &early_vga_console;
- 	} else if (!strncmp(buf, "simnow", 6)) {
- 		simnow_init(buf + 6);
- 		early_console = &simnow_console;
- 		keep_early = 1;
+	} else if (!strncmp(buf, "simnow", 6)) {
+		simnow_init(buf + 6);
+		early_console = &simnow_console;
+		keep_early = 1;
 #ifdef CONFIG_HVC_XEN
 	} else if (!strncmp(buf, "xen", 3)) {
 		early_console = &xenboot_console;
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 759e02bec070..77d424cf68b3 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -383,6 +383,7 @@ static void __init runtime_code_page_mkexec(void)
 {
 	efi_memory_desc_t *md;
 	void *p;
+	u64 addr, npages;
 
 	/* Make EFI runtime service code area executable */
 	for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) {
@@ -391,7 +392,10 @@ static void __init runtime_code_page_mkexec(void)
 		if (md->type != EFI_RUNTIME_SERVICES_CODE)
 			continue;
 
-		set_memory_x(md->virt_addr, md->num_pages);
+		addr = md->virt_addr;
+		npages = md->num_pages;
+		memrange_efi_to_native(&addr, &npages);
+		set_memory_x(addr, npages);
 	}
 }
 
@@ -408,7 +412,7 @@ void __init efi_enter_virtual_mode(void)
 	efi_memory_desc_t *md;
 	efi_status_t status;
 	unsigned long size;
-	u64 end, systab;
+	u64 end, systab, addr, npages;
 	void *p, *va;
 
 	efi.systab = NULL;
@@ -420,7 +424,7 @@ void __init efi_enter_virtual_mode(void)
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
 
-		if ((end >> PAGE_SHIFT) <= max_pfn_mapped)
+		if (PFN_UP(end) <= max_pfn_mapped)
 			va = __va(md->phys_addr);
 		else
 			va = efi_ioremap(md->phys_addr, size);
@@ -433,8 +437,12 @@ void __init efi_enter_virtual_mode(void)
 			continue;
 		}
 
-		if (!(md->attribute & EFI_MEMORY_WB))
-			set_memory_uc(md->virt_addr, md->num_pages);
+		if (!(md->attribute & EFI_MEMORY_WB)) {
+			addr = md->virt_addr;
+			npages = md->num_pages;
+			memrange_efi_to_native(&addr, &npages);
+			set_memory_uc(addr, npages);
+		}
 
 		systab = (u64) (unsigned long) efi_phys.systab;
 		if (md->phys_addr <= systab && systab < end) {
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index d143a1e76b30..d0060fdcccac 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -105,14 +105,14 @@ void __init efi_reserve_bootmem(void)
 
 void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size)
 {
-	static unsigned pages_mapped;
+	static unsigned pages_mapped __initdata;
 	unsigned i, pages;
+	unsigned long offset;
 
-	/* phys_addr and size must be page aligned */
-	if ((phys_addr & ~PAGE_MASK) || (size & ~PAGE_MASK))
-		return NULL;
+	pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
+	offset = phys_addr & ~PAGE_MASK;
+	phys_addr &= PAGE_MASK;
 
-	pages = size >> PAGE_SHIFT;
 	if (pages_mapped + pages > MAX_EFI_IO_PAGES)
 		return NULL;
 
@@ -124,5 +124,5 @@ void __iomem * __init efi_ioremap(unsigned long phys_addr, unsigned long size)
 	}
 
 	return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
-					     (pages_mapped - pages));
+					     (pages_mapped - pages)) + offset;
 }
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 4b87c32b639f..f0f8934fc303 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1,5 +1,4 @@
 /*
- *  linux/arch/i386/entry.S
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  */
@@ -51,6 +50,7 @@
 #include <asm/desc.h>
 #include <asm/percpu.h>
 #include <asm/dwarf2.h>
+#include <asm/processor-flags.h>
 #include "irq_vectors.h"
 
 /*
@@ -68,13 +68,6 @@
 
 #define nr_syscalls ((syscall_table_size)/4)
 
-CF_MASK		= 0x00000001
-TF_MASK		= 0x00000100
-IF_MASK		= 0x00000200
-DF_MASK		= 0x00000400 
-NT_MASK		= 0x00004000
-VM_MASK		= 0x00020000
-
 #ifdef CONFIG_PREEMPT
 #define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
 #else
@@ -84,7 +77,7 @@ VM_MASK		= 0x00020000
 
 .macro TRACE_IRQS_IRET
 #ifdef CONFIG_TRACE_IRQFLAGS
-	testl $IF_MASK,PT_EFLAGS(%esp)     # interrupts off?
+	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)     # interrupts off?
 	jz 1f
 	TRACE_IRQS_ON
 1:
@@ -246,7 +239,7 @@ ret_from_intr:
 check_userspace:
 	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
 	movb PT_CS(%esp), %al
-	andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+	andl $(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
 	cmpl $USER_RPL, %eax
 	jb resume_kernel		# not returning to v8086 or userspace
 
@@ -271,7 +264,7 @@ need_resched:
 	movl TI_flags(%ebp), %ecx	# need_resched set ?
 	testb $_TIF_NEED_RESCHED, %cl
 	jz restore_all
-	testl $IF_MASK,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
+	testl $X86_EFLAGS_IF,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
 	jz restore_all
 	call preempt_schedule_irq
 	jmp need_resched
@@ -291,10 +284,10 @@ ENTRY(ia32_sysenter_target)
 	movl TSS_sysenter_sp0(%esp),%esp
 sysenter_past_esp:
 	/*
-	 * No need to follow this irqs on/off section: the syscall
-	 * disabled irqs and here we enable it straight after entry:
+	 * Interrupts are disabled here, but we can't trace it until
+	 * enough kernel state to call TRACE_IRQS_OFF can be called - but
+	 * we immediately enable interrupts at that point anyway.
 	 */
-	ENABLE_INTERRUPTS(CLBR_NONE)
 	pushl $(__USER_DS)
 	CFI_ADJUST_CFA_OFFSET 4
 	/*CFI_REL_OFFSET ss, 0*/
@@ -302,6 +295,7 @@ sysenter_past_esp:
 	CFI_ADJUST_CFA_OFFSET 4
 	CFI_REL_OFFSET esp, 0
 	pushfl
+	orl $X86_EFLAGS_IF, (%esp)
 	CFI_ADJUST_CFA_OFFSET 4
 	pushl $(__USER_CS)
 	CFI_ADJUST_CFA_OFFSET 4
@@ -315,6 +309,11 @@ sysenter_past_esp:
 	CFI_ADJUST_CFA_OFFSET 4
 	CFI_REL_OFFSET eip, 0
 
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	ENABLE_INTERRUPTS(CLBR_NONE)
+
 /*
  * Load the potential sixth argument from user stack.
  * Careful about security.
@@ -322,14 +321,12 @@ sysenter_past_esp:
 	cmpl $__PAGE_OFFSET-3,%ebp
 	jae syscall_fault
 1:	movl (%ebp),%ebp
+	movl %ebp,PT_EBP(%esp)
 .section __ex_table,"a"
 	.align 4
 	.long 1b,syscall_fault
 .previous
 
-	pushl %eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
@@ -384,7 +381,7 @@ syscall_exit:
 					# setting need_resched or sigpending
 					# between sampling and the iret
 	TRACE_IRQS_OFF
-	testl $TF_MASK,PT_EFLAGS(%esp)	# If tracing set singlestep flag on exit
+	testl $X86_EFLAGS_TF,PT_EFLAGS(%esp)	# If tracing set singlestep flag on exit
 	jz no_singlestep
 	orl $_TIF_SINGLESTEP,TI_flags(%ebp)
 no_singlestep:
@@ -399,7 +396,7 @@ restore_all:
 	# See comments in process.c:copy_thread() for details.
 	movb PT_OLDSS(%esp), %ah
 	movb PT_CS(%esp), %al
-	andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+	andl $(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
 	cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
 	CFI_REMEMBER_STATE
 	je ldt_ss			# returning to user-space with LDT SS
@@ -486,7 +483,7 @@ work_resched:
 work_notifysig:				# deal with pending signals and
 					# notify-resume requests
 #ifdef CONFIG_VM86
-	testl $VM_MASK, PT_EFLAGS(%esp)
+	testl $X86_EFLAGS_VM, PT_EFLAGS(%esp)
 	movl %esp, %eax
 	jne work_notifysig_v86		# returning to kernel-space or
 					# vm86-space
@@ -543,9 +540,6 @@ END(syscall_exit_work)
 
 	RING0_INT_FRAME			# can't unwind into user space anyway
 syscall_fault:
-	pushl %eax			# save orig_eax
-	CFI_ADJUST_CFA_OFFSET 4
-	SAVE_ALL
 	GET_THREAD_INFO(%ebp)
 	movl $-EFAULT,PT_EAX(%esp)
 	jmp resume_userspace
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index c20c9e7e08dd..556a8df522a7 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -319,19 +319,17 @@ badsys:
 	/* Do syscall tracing */
 tracesys:			 
 	SAVE_REST
-	movq $-ENOSYS,RAX(%rsp)
+	movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
 	FIXUP_TOP_OF_STACK %rdi
 	movq %rsp,%rdi
 	call syscall_trace_enter
 	LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
 	RESTORE_REST
 	cmpq $__NR_syscall_max,%rax
-	movq $-ENOSYS,%rcx
-	cmova %rcx,%rax
-	ja  1f
+	ja   int_ret_from_sys_call	/* RAX(%rsp) set to -ENOSYS above */
 	movq %r10,%rcx	/* fixup for C */
 	call *sys_call_table(,%rax,8)
-1:	movq %rax,RAX-ARGOFFSET(%rsp)
+	movq %rax,RAX-ARGOFFSET(%rsp)
 	/* Use IRET because user could have changed frame */
 		
 /* 
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 4ae7b6440260..9546ef408b92 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/ctype.h>
 #include <linux/init.h>
+#include <linux/hardirq.h>
 
 #include <asm/smp.h>
 #include <asm/ipi.h>
@@ -24,20 +25,20 @@
 #include <acpi/acpi_bus.h>
 #endif
 
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata
-					= { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_early_ptr;
-DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+DEFINE_PER_CPU(int, x2apic_extra_bits);
 
 struct genapic __read_mostly *genapic = &apic_flat;
 
+static enum uv_system_type uv_system_type;
+
 /*
  * Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
  */
 void __init setup_apic_routing(void)
 {
+	if (uv_system_type == UV_NON_UNIQUE_APIC)
+		genapic = &apic_x2apic_uv_x;
+	else
 #ifdef CONFIG_ACPI
 	/*
 	 * Quirk: some x86_64 machines can only use physical APIC mode
@@ -64,3 +65,37 @@ void send_IPI_self(int vector)
 {
 	__send_IPI_shortcut(APIC_DEST_SELF, vector, APIC_DEST_PHYSICAL);
 }
+
+int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	if (!strcmp(oem_id, "SGI")) {
+		if (!strcmp(oem_table_id, "UVL"))
+			uv_system_type = UV_LEGACY_APIC;
+		else if (!strcmp(oem_table_id, "UVX"))
+			uv_system_type = UV_X2APIC;
+		else if (!strcmp(oem_table_id, "UVH"))
+			uv_system_type = UV_NON_UNIQUE_APIC;
+	}
+	return 0;
+}
+
+unsigned int read_apic_id(void)
+{
+	unsigned int id;
+
+	WARN_ON(preemptible());
+	id = apic_read(APIC_ID);
+	if (uv_system_type >= UV_X2APIC)
+		id  |= __get_cpu_var(x2apic_extra_bits);
+	return id;
+}
+
+enum uv_system_type get_uv_system_type(void)
+{
+	return uv_system_type;
+}
+
+int is_uv_system(void)
+{
+	return uv_system_type != UV_NONE;
+}
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 07352b74bda6..1a9c68845ee8 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -97,7 +97,7 @@ static void flat_send_IPI_all(int vector)
 
 static int flat_apic_id_registered(void)
 {
-	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+	return physid_isset(GET_APIC_ID(read_apic_id()), phys_cpu_present_map);
 }
 
 static unsigned int flat_cpu_mask_to_apicid(cpumask_t cpumask)
@@ -138,12 +138,9 @@ static cpumask_t physflat_target_cpus(void)
 
 static cpumask_t physflat_vector_allocation_domain(int cpu)
 {
-	cpumask_t domain = CPU_MASK_NONE;
-	cpu_set(cpu, domain);
-	return domain;
+	return cpumask_of_cpu(cpu);
 }
 
-
 static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
 {
 	send_IPI_mask_sequence(cpumask, vector);
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
new file mode 100644
index 000000000000..ebf13908a743
--- /dev/null
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -0,0 +1,250 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV APIC functions (note: not an Intel compatible APIC)
+ *
+ * Copyright (C) 2007 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <asm/smp.h>
+#include <asm/ipi.h>
+#include <asm/genapic.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+struct uv_blade_info *uv_blade_info;
+EXPORT_SYMBOL_GPL(uv_blade_info);
+
+short *uv_node_to_blade;
+EXPORT_SYMBOL_GPL(uv_node_to_blade);
+
+short *uv_cpu_to_blade;
+EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
+
+short uv_possible_blades;
+EXPORT_SYMBOL_GPL(uv_possible_blades);
+
+/* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
+
+static cpumask_t uv_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+static cpumask_t uv_vector_allocation_domain(int cpu)
+{
+	cpumask_t domain = CPU_MASK_NONE;
+	cpu_set(cpu, domain);
+	return domain;
+}
+
+int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip)
+{
+	unsigned long val;
+	int nasid;
+
+	nasid = uv_apicid_to_nasid(phys_apicid);
+	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+	    APIC_DM_INIT;
+	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	mdelay(10);
+
+	val = (1UL << UVH_IPI_INT_SEND_SHFT) |
+	    (phys_apicid << UVH_IPI_INT_APIC_ID_SHFT) |
+	    (((long)start_rip << UVH_IPI_INT_VECTOR_SHFT) >> 12) |
+	    APIC_DM_STARTUP;
+	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+	return 0;
+}
+
+static void uv_send_IPI_one(int cpu, int vector)
+{
+	unsigned long val, apicid, lapicid;
+	int nasid;
+
+	apicid = per_cpu(x86_cpu_to_apicid, cpu); /* ZZZ - cache node-local ? */
+	lapicid = apicid & 0x3f;		/* ZZZ macro needed */
+	nasid = uv_apicid_to_nasid(apicid);
+	val =
+	    (1UL << UVH_IPI_INT_SEND_SHFT) | (lapicid <<
+					      UVH_IPI_INT_APIC_ID_SHFT) |
+	    (vector << UVH_IPI_INT_VECTOR_SHFT);
+	uv_write_global_mmr64(nasid, UVH_IPI_INT, val);
+}
+
+static void uv_send_IPI_mask(cpumask_t mask, int vector)
+{
+	unsigned int cpu;
+
+	for (cpu = 0; cpu < NR_CPUS; ++cpu)
+		if (cpu_isset(cpu, mask))
+			uv_send_IPI_one(cpu, vector);
+}
+
+static void uv_send_IPI_allbutself(int vector)
+{
+	cpumask_t mask = cpu_online_map;
+
+	cpu_clear(smp_processor_id(), mask);
+
+	if (!cpus_empty(mask))
+		uv_send_IPI_mask(mask, vector);
+}
+
+static void uv_send_IPI_all(int vector)
+{
+	uv_send_IPI_mask(cpu_online_map, vector);
+}
+
+static int uv_apic_id_registered(void)
+{
+	return 1;
+}
+
+static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return per_cpu(x86_cpu_to_apicid, cpu);
+	else
+		return BAD_APICID;
+}
+
+static unsigned int phys_pkg_id(int index_msb)
+{
+	return GET_APIC_ID(read_apic_id()) >> index_msb;
+}
+
+#ifdef ZZZ		/* Needs x2apic patch */
+static void uv_send_IPI_self(int vector)
+{
+	apic_write(APIC_SELF_IPI, vector);
+}
+#endif
+
+struct genapic apic_x2apic_uv_x = {
+	.name = "UV large system",
+	.int_delivery_mode = dest_Fixed,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.target_cpus = uv_target_cpus,
+	.vector_allocation_domain = uv_vector_allocation_domain,/* Fixme ZZZ */
+	.apic_id_registered = uv_apic_id_registered,
+	.send_IPI_all = uv_send_IPI_all,
+	.send_IPI_allbutself = uv_send_IPI_allbutself,
+	.send_IPI_mask = uv_send_IPI_mask,
+	/* ZZZ.send_IPI_self = uv_send_IPI_self, */
+	.cpu_mask_to_apicid = uv_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,	/* Fixme ZZZ */
+};
+
+static __cpuinit void set_x2apic_extra_bits(int nasid)
+{
+	__get_cpu_var(x2apic_extra_bits) = ((nasid >> 1) << 6);
+}
+
+/*
+ * Called on boot cpu.
+ */
+static __init void uv_system_init(void)
+{
+	union uvh_si_addr_map_config_u m_n_config;
+	int bytes, nid, cpu, lcpu, nasid, last_nasid, blade;
+	unsigned long mmr_base;
+
+	m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+	mmr_base =
+	    uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+	    ~UV_MMR_ENABLE;
+	printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+	last_nasid = -1;
+	for_each_possible_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
+		if (nasid != last_nasid)
+			uv_possible_blades++;
+		last_nasid = nasid;
+	}
+	printk(KERN_DEBUG "UV: Found %d blades\n", uv_num_possible_blades());
+
+	bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
+	uv_blade_info = alloc_bootmem_pages(bytes);
+
+	bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
+	uv_node_to_blade = alloc_bootmem_pages(bytes);
+	memset(uv_node_to_blade, 255, bytes);
+
+	bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
+	uv_cpu_to_blade = alloc_bootmem_pages(bytes);
+	memset(uv_cpu_to_blade, 255, bytes);
+
+	last_nasid = -1;
+	blade = -1;
+	lcpu = -1;
+	for_each_possible_cpu(cpu) {
+		nid = cpu_to_node(cpu);
+		nasid = uv_apicid_to_nasid(per_cpu(x86_cpu_to_apicid, cpu));
+		if (nasid != last_nasid) {
+			blade++;
+			lcpu = -1;
+			uv_blade_info[blade].nr_posible_cpus = 0;
+			uv_blade_info[blade].nr_online_cpus = 0;
+		}
+		last_nasid = nasid;
+		lcpu++;
+
+		uv_cpu_hub_info(cpu)->m_val = m_n_config.s.m_skt;
+		uv_cpu_hub_info(cpu)->n_val = m_n_config.s.n_skt;
+		uv_cpu_hub_info(cpu)->numa_blade_id = blade;
+		uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
+		uv_cpu_hub_info(cpu)->local_nasid = nasid;
+		uv_cpu_hub_info(cpu)->gnode_upper =
+		    nasid & ~((1 << uv_hub_info->n_val) - 1);
+		uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+		uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+		uv_blade_info[blade].nasid = nasid;
+		uv_blade_info[blade].nr_posible_cpus++;
+		uv_node_to_blade[nid] = blade;
+		uv_cpu_to_blade[cpu] = blade;
+
+		printk(KERN_DEBUG "UV cpu %d, apicid 0x%x, nasid %d, nid %d\n",
+		       cpu, per_cpu(x86_cpu_to_apicid, cpu), nasid, nid);
+		printk(KERN_DEBUG "UV   lcpu %d, blade %d\n", lcpu, blade);
+	}
+}
+
+/*
+ * Called on each cpu to initialize the per_cpu UV data area.
+ */
+void __cpuinit uv_cpu_init(void)
+{
+	if (!uv_node_to_blade)
+		uv_system_init();
+
+	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
+
+	if (get_uv_system_type() == UV_NON_UNIQUE_APIC)
+		set_x2apic_extra_bits(uv_hub_info->local_nasid);
+}
diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c
new file mode 100644
index 000000000000..3db059058927
--- /dev/null
+++ b/arch/x86/kernel/head32.c
@@ -0,0 +1,14 @@
+/*
+ *  linux/arch/i386/kernel/head32.c -- prepare to run common code
+ *
+ *  Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
+ *  Copyright (C) 2007 Eric Biederman <ebiederm@xmission.com>
+ */
+
+#include <linux/init.h>
+#include <linux/start_kernel.h>
+
+void __init i386_start_kernel(void)
+{
+	start_kernel();
+}
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index ad2440832de0..993c76773256 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -49,39 +49,75 @@ static void __init copy_bootdata(char *real_mode_data)
 	}
 }
 
-#define EBDA_ADDR_POINTER 0x40E
+#define BIOS_EBDA_SEGMENT 0x40E
+#define BIOS_LOWMEM_KILOBYTES 0x413
 
-static __init void reserve_ebda(void)
+/*
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
+ */
+static void __init reserve_ebda_region(void)
 {
-	unsigned ebda_addr, ebda_size;
+	unsigned int lowmem, ebda_addr;
+
+	/* To determine the position of the EBDA and the */
+	/* end of conventional memory, we need to look at */
+	/* the BIOS data area. In a paravirtual environment */
+	/* that area is absent. We'll just have to assume */
+	/* that the paravirt case can handle memory setup */
+	/* correctly, without our help. */
+	if (paravirt_enabled())
+		return;
 
-	/*
-	 * there is a real-mode segmented pointer pointing to the
-	 * 4K EBDA area at 0x40E
-	 */
-	ebda_addr = *(unsigned short *)__va(EBDA_ADDR_POINTER);
+	/* end of low (conventional) memory */
+	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+	lowmem <<= 10;
+
+	/* start of EBDA area */
+	ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
 	ebda_addr <<= 4;
 
-	if (!ebda_addr)
-		return;
+	/* Fixup: bios puts an EBDA in the top 64K segment */
+	/* of conventional memory, but does not adjust lowmem. */
+	if ((lowmem - ebda_addr) <= 0x10000)
+		lowmem = ebda_addr;
 
-	ebda_size = *(unsigned short *)__va(ebda_addr);
+	/* Fixup: bios does not report an EBDA at all. */
+	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+		lowmem = 0x9f000;
 
-	/* Round EBDA up to pages */
-	if (ebda_size == 0)
-		ebda_size = 1;
-	ebda_size <<= 10;
-	ebda_size = round_up(ebda_size + (ebda_addr & ~PAGE_MASK), PAGE_SIZE);
-	if (ebda_size > 64*1024)
-		ebda_size = 64*1024;
+	/* Paranoia: should never happen, but... */
+	if ((lowmem == 0) || (lowmem >= 0x100000))
+		lowmem = 0x9f000;
 
-	reserve_early(ebda_addr, ebda_addr + ebda_size, "EBDA");
+	/* reserve all memory between lowmem and the 1MB mark */
+	reserve_early(lowmem, 0x100000, "BIOS reserved");
 }
 
 void __init x86_64_start_kernel(char * real_mode_data)
 {
 	int i;
 
+	/*
+	 * Build-time sanity checks on the kernel image and module
+	 * area mappings. (these are purely build-time and produce no code)
+	 */
+	BUILD_BUG_ON(MODULES_VADDR < KERNEL_IMAGE_START);
+	BUILD_BUG_ON(MODULES_VADDR-KERNEL_IMAGE_START < KERNEL_IMAGE_SIZE);
+	BUILD_BUG_ON(MODULES_LEN + KERNEL_IMAGE_SIZE > 2*PUD_SIZE);
+	BUILD_BUG_ON((KERNEL_IMAGE_START & ~PMD_MASK) != 0);
+	BUILD_BUG_ON((MODULES_VADDR & ~PMD_MASK) != 0);
+	BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
+	BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
+				(__START_KERNEL & PGDIR_MASK)));
+
 	/* clear bss before set_intr_gate with early_idt_handler */
 	clear_bss();
 
@@ -91,7 +127,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 	/* Cleanup the over mapped high alias */
 	cleanup_highmap();
 
-	for (i = 0; i < IDT_ENTRIES; i++) {
+	for (i = 0; i < NUM_EXCEPTION_VECTORS; i++) {
 #ifdef CONFIG_EARLY_PRINTK
 		set_intr_gate(i, &early_idt_handlers[i]);
 #else
@@ -110,6 +146,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	reserve_early(__pa_symbol(&_text), __pa_symbol(&_end), "TEXT DATA BSS");
 
+#ifdef CONFIG_BLK_DEV_INITRD
 	/* Reserve INITRD */
 	if (boot_params.hdr.type_of_loader && boot_params.hdr.ramdisk_image) {
 		unsigned long ramdisk_image = boot_params.hdr.ramdisk_image;
@@ -117,8 +154,9 @@ void __init x86_64_start_kernel(char * real_mode_data)
 		unsigned long ramdisk_end   = ramdisk_image + ramdisk_size;
 		reserve_early(ramdisk_image, ramdisk_end, "RAMDISK");
 	}
+#endif
 
-	reserve_ebda();
+	reserve_ebda_region();
 
 	/*
 	 * At this point everything still needed from the boot loader
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index fd8ca53943a8..90f038af3adc 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -1,5 +1,4 @@
 /*
- *  linux/arch/i386/kernel/head.S -- the 32-bit startup code.
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
  *
@@ -450,7 +449,7 @@ is386:	movl $2,%ecx		# set MP
 	jmp initialize_secondary # all other CPUs call initialize_secondary
 1:
 #endif /* CONFIG_SMP */
-	jmp start_kernel
+	jmp i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
@@ -657,7 +656,7 @@ int_msg:
 	.asciz "Unknown interrupt or fault at EIP %p %p %p\n"
 
 fault_msg:
-	.ascii								\
+	.asciz								\
 /* fault info: */	"BUG: Int %d: CR2 %p\n"				\
 /* pusha regs: */	"     EDI %p  ESI %p  EBP %p  ESP %p\n"		\
 			"     EBX %p  EDX %p  ECX %p  EAX %p\n"		\
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index a007454133a3..10a1955bb1d1 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -132,10 +132,6 @@ ident_complete:
 	addq	%rbp, trampoline_level4_pgt + 0(%rip)
 	addq	%rbp, trampoline_level4_pgt + (511*8)(%rip)
 #endif
-#ifdef CONFIG_ACPI_SLEEP
-	addq	%rbp, wakeup_level4_pgt + 0(%rip)
-	addq	%rbp, wakeup_level4_pgt + (511*8)(%rip)
-#endif
 
 	/* Due to ENTRY(), sometimes the empty space gets filled with
 	 * zeros. Better take a jmp than relying on empty space being
@@ -267,21 +263,16 @@ ENTRY(secondary_startup_64)
 bad_address:
 	jmp bad_address
 
+	.section ".init.text","ax"
 #ifdef CONFIG_EARLY_PRINTK
-.macro early_idt_tramp first, last
-	.ifgt \last-\first
-	early_idt_tramp \first, \last-1
-	.endif
-	movl $\last,%esi
-	jmp early_idt_handler
-.endm
-
 	.globl early_idt_handlers
 early_idt_handlers:
-	early_idt_tramp 0, 63
-	early_idt_tramp 64, 127
-	early_idt_tramp 128, 191
-	early_idt_tramp 192, 255
+	i = 0
+	.rept NUM_EXCEPTION_VECTORS
+	movl $i, %esi
+	jmp early_idt_handler
+	i = i + 1
+	.endr
 #endif
 
 ENTRY(early_idt_handler)
@@ -327,6 +318,7 @@ early_idt_msg:
 early_idt_ripmsg:
 	.asciz "RIP %s\n"
 #endif /* CONFIG_EARLY_PRINTK */
+	.previous
 
 .balign PAGE_SIZE
 
@@ -383,12 +375,12 @@ NEXT_PAGE(level2_ident_pgt)
 
 NEXT_PAGE(level2_kernel_pgt)
 	/*
-	 * 128 MB kernel mapping. We spend a full page on this pagetable
+	 * 512 MB kernel mapping. We spend a full page on this pagetable
 	 * anyway.
 	 *
 	 * The kernel code+data+bss must not be bigger than that.
 	 *
-	 * (NOTE: at +128MB starts the module area, see MODULES_VADDR.
+	 * (NOTE: at +512MB starts the module area, see MODULES_VADDR.
 	 *  If you want to increase this then increase MODULES_VADDR
 	 *  too.)
 	 */
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 235fd6c77504..36652ea1a265 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -133,13 +133,16 @@ static void hpet_reserve_platform_timers(unsigned long id)
 #ifdef CONFIG_HPET_EMULATE_RTC
 	hpet_reserve_timer(&hd, 1);
 #endif
+
 	hd.hd_irq[0] = HPET_LEGACY_8254;
 	hd.hd_irq[1] = HPET_LEGACY_RTC;
 
-       for (i = 2; i < nrtimers; timer++, i++)
-	       hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
-		       Tn_INT_ROUTE_CNF_SHIFT;
+	for (i = 2; i < nrtimers; timer++, i++)
+		hd.hd_irq[i] = (timer->hpet_config & Tn_INT_ROUTE_CNF_MASK) >>
+			Tn_INT_ROUTE_CNF_SHIFT;
+
 	hpet_alloc(&hd);
+
 }
 #else
 static void hpet_reserve_platform_timers(unsigned long id) { }
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 061627806a2d..deb43785e923 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -1,13 +1,8 @@
 #include <linux/module.h>
-#include <asm/semaphore.h>
 #include <asm/checksum.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 763dfc407232..db6839b53195 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -5,51 +5,48 @@
  *  General FPU state handling cleanups
  *	Gareth Hughes <gareth@valinux.com>, May 2000
  */
-
-#include <linux/sched.h>
 #include <linux/module.h>
 #include <linux/regset.h>
+#include <linux/sched.h>
+
+#include <asm/sigcontext.h>
 #include <asm/processor.h>
-#include <asm/i387.h>
 #include <asm/math_emu.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/ptrace.h>
 #include <asm/uaccess.h>
+#include <asm/ptrace.h>
+#include <asm/i387.h>
+#include <asm/user.h>
 
 #ifdef CONFIG_X86_64
-
-#include <asm/sigcontext32.h>
-#include <asm/user32.h>
-
+# include <asm/sigcontext32.h>
+# include <asm/user32.h>
 #else
-
-#define	save_i387_ia32		save_i387
-#define	restore_i387_ia32	restore_i387
-
-#define _fpstate_ia32 		_fpstate
-#define user_i387_ia32_struct	user_i387_struct
-#define user32_fxsr_struct	user_fxsr_struct
-
+# define save_i387_ia32		save_i387
+# define restore_i387_ia32	restore_i387
+# define _fpstate_ia32		_fpstate
+# define user_i387_ia32_struct	user_i387_struct
+# define user32_fxsr_struct	user_fxsr_struct
 #endif
 
 #ifdef CONFIG_MATH_EMULATION
-#define HAVE_HWFP (boot_cpu_data.hard_math)
+# define HAVE_HWFP		(boot_cpu_data.hard_math)
 #else
-#define HAVE_HWFP 1
+# define HAVE_HWFP		1
 #endif
 
-static unsigned int mxcsr_feature_mask __read_mostly = 0xffffffffu;
+static unsigned int		mxcsr_feature_mask __read_mostly = 0xffffffffu;
+unsigned int xstate_size;
+static struct i387_fxsave_struct fx_scratch __cpuinitdata;
 
-void mxcsr_feature_mask_init(void)
+void __cpuinit mxcsr_feature_mask_init(void)
 {
 	unsigned long mask = 0;
+
 	clts();
 	if (cpu_has_fxsr) {
-		memset(&current->thread.i387.fxsave, 0,
-		       sizeof(struct i387_fxsave_struct));
-		asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave));
-		mask = current->thread.i387.fxsave.mxcsr_mask;
+		memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
+		asm volatile("fxsave %0" : : "m" (fx_scratch));
+		mask = fx_scratch.mxcsr_mask;
 		if (mask == 0)
 			mask = 0x0000ffbf;
 	}
@@ -57,6 +54,16 @@ void mxcsr_feature_mask_init(void)
 	stts();
 }
 
+void __init init_thread_xstate(void)
+{
+	if (cpu_has_fxsr)
+		xstate_size = sizeof(struct i387_fxsave_struct);
+#ifdef CONFIG_X86_32
+	else
+		xstate_size = sizeof(struct i387_fsave_struct);
+#endif
+}
+
 #ifdef CONFIG_X86_64
 /*
  * Called at bootup to set up the initial FPU state that is later cloned
@@ -65,14 +72,11 @@ void mxcsr_feature_mask_init(void)
 void __cpuinit fpu_init(void)
 {
 	unsigned long oldcr0 = read_cr0();
-	extern void __bad_fxsave_alignment(void);
 
-	if (offsetof(struct task_struct, thread.i387.fxsave) & 15)
-		__bad_fxsave_alignment();
 	set_in_cr4(X86_CR4_OSFXSR);
 	set_in_cr4(X86_CR4_OSXMMEXCPT);
 
-	write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */
+	write_cr0(oldcr0 & ~(X86_CR0_TS|X86_CR0_EM)); /* clear TS and EM */
 
 	mxcsr_feature_mask_init();
 	/* clean state in init */
@@ -87,32 +91,44 @@ void __cpuinit fpu_init(void)
  * value at reset if we support XMM instructions and then
  * remeber the current task has used the FPU.
  */
-void init_fpu(struct task_struct *tsk)
+int init_fpu(struct task_struct *tsk)
 {
 	if (tsk_used_math(tsk)) {
 		if (tsk == current)
 			unlazy_fpu(tsk);
-		return;
+		return 0;
+	}
+
+	/*
+	 * Memory allocation at the first usage of the FPU and other state.
+	 */
+	if (!tsk->thread.xstate) {
+		tsk->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+						      GFP_KERNEL);
+		if (!tsk->thread.xstate)
+			return -ENOMEM;
 	}
 
 	if (cpu_has_fxsr) {
-		memset(&tsk->thread.i387.fxsave, 0,
-		       sizeof(struct i387_fxsave_struct));
-		tsk->thread.i387.fxsave.cwd = 0x37f;
+		struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
+
+		memset(fx, 0, xstate_size);
+		fx->cwd = 0x37f;
 		if (cpu_has_xmm)
-			tsk->thread.i387.fxsave.mxcsr = MXCSR_DEFAULT;
+			fx->mxcsr = MXCSR_DEFAULT;
 	} else {
-		memset(&tsk->thread.i387.fsave, 0,
-		       sizeof(struct i387_fsave_struct));
-		tsk->thread.i387.fsave.cwd = 0xffff037fu;
-		tsk->thread.i387.fsave.swd = 0xffff0000u;
-		tsk->thread.i387.fsave.twd = 0xffffffffu;
-		tsk->thread.i387.fsave.fos = 0xffff0000u;
+		struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
+		memset(fp, 0, xstate_size);
+		fp->cwd = 0xffff037fu;
+		fp->swd = 0xffff0000u;
+		fp->twd = 0xffffffffu;
+		fp->fos = 0xffff0000u;
 	}
 	/*
 	 * Only the device not available exception or ptrace can call init_fpu.
 	 */
 	set_stopped_child_used_math(tsk);
+	return 0;
 }
 
 int fpregs_active(struct task_struct *target, const struct user_regset *regset)
@@ -129,13 +145,17 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset,
 		unsigned int pos, unsigned int count,
 		void *kbuf, void __user *ubuf)
 {
+	int ret;
+
 	if (!cpu_has_fxsr)
 		return -ENODEV;
 
-	unlazy_fpu(target);
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-				   &target->thread.i387.fxsave, 0, -1);
+				   &target->thread.xstate->fxsave, 0, -1);
 }
 
 int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
@@ -147,16 +167,19 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (!cpu_has_fxsr)
 		return -ENODEV;
 
-	unlazy_fpu(target);
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
 	set_stopped_child_used_math(target);
 
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-				 &target->thread.i387.fxsave, 0, -1);
+				 &target->thread.xstate->fxsave, 0, -1);
 
 	/*
 	 * mxcsr reserved bits must be masked to zero for security reasons.
 	 */
-	target->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
+	target->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
 
 	return ret;
 }
@@ -178,6 +201,7 @@ static inline unsigned short twd_i387_to_fxsr(unsigned short twd)
 	tmp = (tmp | (tmp >> 1)) & 0x3333; /* 00VV00VV00VV00VV */
 	tmp = (tmp | (tmp >> 2)) & 0x0f0f; /* 0000VVVV0000VVVV */
 	tmp = (tmp | (tmp >> 4)) & 0x00ff; /* 00000000VVVVVVVV */
+
 	return tmp;
 }
 
@@ -232,10 +256,10 @@ static inline u32 twd_fxsr_to_i387(struct i387_fxsave_struct *fxsave)
  * FXSR floating point environment conversions.
  */
 
-static void convert_from_fxsr(struct user_i387_ia32_struct *env,
-			      struct task_struct *tsk)
+static void
+convert_from_fxsr(struct user_i387_ia32_struct *env, struct task_struct *tsk)
 {
-	struct i387_fxsave_struct *fxsave = &tsk->thread.i387.fxsave;
+	struct i387_fxsave_struct *fxsave = &tsk->thread.xstate->fxsave;
 	struct _fpreg *to = (struct _fpreg *) &env->st_space[0];
 	struct _fpxreg *from = (struct _fpxreg *) &fxsave->st_space[0];
 	int i;
@@ -252,16 +276,17 @@ static void convert_from_fxsr(struct user_i387_ia32_struct *env,
 		 * should be actually ds/cs at fpu exception time, but
 		 * that information is not available in 64bit mode.
 		 */
-		asm("mov %%ds,%0" : "=r" (env->fos));
-		asm("mov %%cs,%0" : "=r" (env->fcs));
+		asm("mov %%ds, %[fos]" : [fos] "=r" (env->fos));
+		asm("mov %%cs, %[fcs]" : [fcs] "=r" (env->fcs));
 	} else {
 		struct pt_regs *regs = task_pt_regs(tsk);
+
 		env->fos = 0xffff0000 | tsk->thread.ds;
 		env->fcs = regs->cs;
 	}
 #else
 	env->fip = fxsave->fip;
-	env->fcs = fxsave->fcs;
+	env->fcs = (u16) fxsave->fcs | ((u32) fxsave->fop << 16);
 	env->foo = fxsave->foo;
 	env->fos = fxsave->fos;
 #endif
@@ -274,7 +299,7 @@ static void convert_to_fxsr(struct task_struct *tsk,
 			    const struct user_i387_ia32_struct *env)
 
 {
-	struct i387_fxsave_struct *fxsave = &tsk->thread.i387.fxsave;
+	struct i387_fxsave_struct *fxsave = &tsk->thread.xstate->fxsave;
 	struct _fpreg *from = (struct _fpreg *) &env->st_space[0];
 	struct _fpxreg *to = (struct _fpxreg *) &fxsave->st_space[0];
 	int i;
@@ -303,15 +328,20 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset,
 	       void *kbuf, void __user *ubuf)
 {
 	struct user_i387_ia32_struct env;
+	int ret;
 
 	if (!HAVE_HWFP)
 		return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
 
-	unlazy_fpu(target);
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
 
-	if (!cpu_has_fxsr)
+	if (!cpu_has_fxsr) {
 		return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
-					   &target->thread.i387.fsave, 0, -1);
+					   &target->thread.xstate->fsave, 0,
+					   -1);
+	}
 
 	if (kbuf && pos == 0 && count == sizeof(env)) {
 		convert_from_fxsr(kbuf, target);
@@ -319,6 +349,7 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset,
 	}
 
 	convert_from_fxsr(&env, target);
+
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &env, 0, -1);
 }
 
@@ -332,12 +363,16 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 	if (!HAVE_HWFP)
 		return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
 
-	unlazy_fpu(target);
+	ret = init_fpu(target);
+	if (ret)
+		return ret;
+
 	set_stopped_child_used_math(target);
 
-	if (!cpu_has_fxsr)
+	if (!cpu_has_fxsr) {
 		return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
-					  &target->thread.i387.fsave, 0, -1);
+					  &target->thread.xstate->fsave, 0, -1);
+	}
 
 	if (pos > 0 || count < sizeof(env))
 		convert_from_fxsr(&env, target);
@@ -356,11 +391,11 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset,
 static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
 {
 	struct task_struct *tsk = current;
+	struct i387_fsave_struct *fp = &tsk->thread.xstate->fsave;
 
 	unlazy_fpu(tsk);
-	tsk->thread.i387.fsave.status = tsk->thread.i387.fsave.swd;
-	if (__copy_to_user(buf, &tsk->thread.i387.fsave,
-			   sizeof(struct i387_fsave_struct)))
+	fp->status = fp->swd;
+	if (__copy_to_user(buf, fp, sizeof(struct i387_fsave_struct)))
 		return -1;
 	return 1;
 }
@@ -368,6 +403,7 @@ static inline int save_i387_fsave(struct _fpstate_ia32 __user *buf)
 static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 {
 	struct task_struct *tsk = current;
+	struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
 	struct user_i387_ia32_struct env;
 	int err = 0;
 
@@ -377,12 +413,12 @@ static int save_i387_fxsave(struct _fpstate_ia32 __user *buf)
 	if (__copy_to_user(buf, &env, sizeof(env)))
 		return -1;
 
-	err |= __put_user(tsk->thread.i387.fxsave.swd, &buf->status);
+	err |= __put_user(fx->swd, &buf->status);
 	err |= __put_user(X86_FXSR_MAGIC, &buf->magic);
 	if (err)
 		return -1;
 
-	if (__copy_to_user(&buf->_fxsr_env[0], &tsk->thread.i387.fxsave,
+	if (__copy_to_user(&buf->_fxsr_env[0], fx,
 			   sizeof(struct i387_fxsave_struct)))
 		return -1;
 	return 1;
@@ -392,46 +428,48 @@ int save_i387_ia32(struct _fpstate_ia32 __user *buf)
 {
 	if (!used_math())
 		return 0;
-
-	/* This will cause a "finit" to be triggered by the next
+	/*
+	 * This will cause a "finit" to be triggered by the next
 	 * attempted FPU operation by the 'current' process.
 	 */
 	clear_used_math();
 
-	if (HAVE_HWFP) {
-		if (cpu_has_fxsr) {
-			return save_i387_fxsave(buf);
-		} else {
-			return save_i387_fsave(buf);
-		}
-	} else {
+	if (!HAVE_HWFP) {
 		return fpregs_soft_get(current, NULL,
 				       0, sizeof(struct user_i387_ia32_struct),
 				       NULL, buf) ? -1 : 1;
 	}
+
+	if (cpu_has_fxsr)
+		return save_i387_fxsave(buf);
+	else
+		return save_i387_fsave(buf);
 }
 
 static inline int restore_i387_fsave(struct _fpstate_ia32 __user *buf)
 {
 	struct task_struct *tsk = current;
+
 	clear_fpu(tsk);
-	return __copy_from_user(&tsk->thread.i387.fsave, buf,
+	return __copy_from_user(&tsk->thread.xstate->fsave, buf,
 				sizeof(struct i387_fsave_struct));
 }
 
 static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf)
 {
-	int err;
 	struct task_struct *tsk = current;
 	struct user_i387_ia32_struct env;
+	int err;
+
 	clear_fpu(tsk);
-	err = __copy_from_user(&tsk->thread.i387.fxsave, &buf->_fxsr_env[0],
+	err = __copy_from_user(&tsk->thread.xstate->fxsave, &buf->_fxsr_env[0],
 			       sizeof(struct i387_fxsave_struct));
 	/* mxcsr reserved bits must be masked to zero for security reasons */
-	tsk->thread.i387.fxsave.mxcsr &= mxcsr_feature_mask;
+	tsk->thread.xstate->fxsave.mxcsr &= mxcsr_feature_mask;
 	if (err || __copy_from_user(&env, buf, sizeof(env)))
 		return 1;
 	convert_to_fxsr(tsk, &env);
+
 	return 0;
 }
 
@@ -440,17 +478,17 @@ int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
 	int err;
 
 	if (HAVE_HWFP) {
-		if (cpu_has_fxsr) {
+		if (cpu_has_fxsr)
 			err = restore_i387_fxsave(buf);
-		} else {
+		else
 			err = restore_i387_fsave(buf);
-		}
 	} else {
 		err = fpregs_soft_set(current, NULL,
 				      0, sizeof(struct user_i387_ia32_struct),
 				      NULL, buf) != 0;
 	}
 	set_used_math();
+
 	return err;
 }
 
@@ -463,8 +501,8 @@ int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
  */
 int dump_fpu(struct pt_regs *regs, struct user_i387_struct *fpu)
 {
-	int fpvalid;
 	struct task_struct *tsk = current;
+	int fpvalid;
 
 	fpvalid = !!used_math();
 	if (fpvalid)
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 4ca548632c8d..2e2f42074e18 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -71,6 +71,16 @@ int sis_apic_bug = -1;
  */
 int nr_ioapic_registers[MAX_IO_APICS];
 
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
 static int disable_timer_pin_1 __initdata;
 
 /*
@@ -810,10 +820,7 @@ static int __init find_isa_irq_pin(int irq, int type)
 	for (i = 0; i < mp_irq_entries; i++) {
 		int lbus = mp_irqs[i].mpc_srcbus;
 
-		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
-		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
-		     mp_bus_id_to_type[lbus] == MP_BUS_MCA
-		    ) &&
+		if (test_bit(lbus, mp_bus_not_pci) &&
 		    (mp_irqs[i].mpc_irqtype == type) &&
 		    (mp_irqs[i].mpc_srcbusirq == irq))
 
@@ -829,10 +836,7 @@ static int __init find_isa_irq_apic(int irq, int type)
 	for (i = 0; i < mp_irq_entries; i++) {
 		int lbus = mp_irqs[i].mpc_srcbus;
 
-		if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA ||
-		     mp_bus_id_to_type[lbus] == MP_BUS_EISA ||
-		     mp_bus_id_to_type[lbus] == MP_BUS_MCA
-		    ) &&
+		if (test_bit(lbus, mp_bus_not_pci) &&
 		    (mp_irqs[i].mpc_irqtype == type) &&
 		    (mp_irqs[i].mpc_srcbusirq == irq))
 			break;
@@ -872,7 +876,7 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
 			    mp_irqs[i].mpc_dstapic == MP_APIC_ALL)
 				break;
 
-		if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) &&
+		if (!test_bit(lbus, mp_bus_not_pci) &&
 		    !mp_irqs[i].mpc_irqtype &&
 		    (bus == lbus) &&
 		    (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) {
@@ -921,6 +925,7 @@ void __init setup_ioapic_dest(void)
 }
 #endif
 
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 /*
  * EISA Edge/Level control register, ELCR
  */
@@ -934,6 +939,13 @@ static int EISA_ELCR(unsigned int irq)
 			"Broken MPtable reports ISA irq %d\n", irq);
 	return 0;
 }
+#endif
+
+/* ISA interrupts are always polarity zero edge triggered,
+ * when listed as conforming in the MP table. */
+
+#define default_ISA_trigger(idx)	(0)
+#define default_ISA_polarity(idx)	(0)
 
 /* EISA interrupts are always polarity zero and can be edge or level
  * trigger depending on the ELCR value.  If an interrupt is listed as
@@ -941,13 +953,7 @@ static int EISA_ELCR(unsigned int irq)
  * be read in from the ELCR */
 
 #define default_EISA_trigger(idx)	(EISA_ELCR(mp_irqs[idx].mpc_srcbusirq))
-#define default_EISA_polarity(idx)	(0)
-
-/* ISA interrupts are always polarity zero edge triggered,
- * when listed as conforming in the MP table. */
-
-#define default_ISA_trigger(idx)	(0)
-#define default_ISA_polarity(idx)	(0)
+#define default_EISA_polarity(idx)	default_ISA_polarity(idx)
 
 /* PCI interrupts are always polarity one level triggered,
  * when listed as conforming in the MP table. */
@@ -959,7 +965,7 @@ static int EISA_ELCR(unsigned int irq)
  * when listed as conforming in the MP table. */
 
 #define default_MCA_trigger(idx)	(1)
-#define default_MCA_polarity(idx)	(0)
+#define default_MCA_polarity(idx)	default_ISA_polarity(idx)
 
 static int MPBIOS_polarity(int idx)
 {
@@ -973,35 +979,9 @@ static int MPBIOS_polarity(int idx)
 	{
 		case 0: /* conforms, ie. bus-type dependent polarity */
 		{
-			switch (mp_bus_id_to_type[bus])
-			{
-				case MP_BUS_ISA: /* ISA pin */
-				{
-					polarity = default_ISA_polarity(idx);
-					break;
-				}
-				case MP_BUS_EISA: /* EISA pin */
-				{
-					polarity = default_EISA_polarity(idx);
-					break;
-				}
-				case MP_BUS_PCI: /* PCI pin */
-				{
-					polarity = default_PCI_polarity(idx);
-					break;
-				}
-				case MP_BUS_MCA: /* MCA pin */
-				{
-					polarity = default_MCA_polarity(idx);
-					break;
-				}
-				default:
-				{
-					printk(KERN_WARNING "broken BIOS!!\n");
-					polarity = 1;
-					break;
-				}
-			}
+			polarity = test_bit(bus, mp_bus_not_pci)?
+				default_ISA_polarity(idx):
+				default_PCI_polarity(idx);
 			break;
 		}
 		case 1: /* high active */
@@ -1042,11 +1022,15 @@ static int MPBIOS_trigger(int idx)
 	{
 		case 0: /* conforms, ie. bus-type dependent */
 		{
+			trigger = test_bit(bus, mp_bus_not_pci)?
+					default_ISA_trigger(idx):
+					default_PCI_trigger(idx);
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
 			switch (mp_bus_id_to_type[bus])
 			{
 				case MP_BUS_ISA: /* ISA pin */
 				{
-					trigger = default_ISA_trigger(idx);
+					/* set before the switch */
 					break;
 				}
 				case MP_BUS_EISA: /* EISA pin */
@@ -1056,7 +1040,7 @@ static int MPBIOS_trigger(int idx)
 				}
 				case MP_BUS_PCI: /* PCI pin */
 				{
-					trigger = default_PCI_trigger(idx);
+					/* set before the switch */
 					break;
 				}
 				case MP_BUS_MCA: /* MCA pin */
@@ -1071,6 +1055,7 @@ static int MPBIOS_trigger(int idx)
 					break;
 				}
 			}
+#endif
 			break;
 		}
 		case 1: /* edge */
@@ -1120,39 +1105,22 @@ static int pin_2_irq(int idx, int apic, int pin)
 	if (mp_irqs[idx].mpc_dstirq != pin)
 		printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n");
 
-	switch (mp_bus_id_to_type[bus])
-	{
-		case MP_BUS_ISA: /* ISA pin */
-		case MP_BUS_EISA:
-		case MP_BUS_MCA:
-		{
-			irq = mp_irqs[idx].mpc_srcbusirq;
-			break;
-		}
-		case MP_BUS_PCI: /* PCI pin */
-		{
-			/*
-			 * PCI IRQs are mapped in order
-			 */
-			i = irq = 0;
-			while (i < apic)
-				irq += nr_ioapic_registers[i++];
-			irq += pin;
-
-			/*
-			 * For MPS mode, so far only needed by ES7000 platform
-			 */
-			if (ioapic_renumber_irq)
-				irq = ioapic_renumber_irq(apic, irq);
+	if (test_bit(bus, mp_bus_not_pci))
+		irq = mp_irqs[idx].mpc_srcbusirq;
+	else {
+		/*
+		 * PCI IRQs are mapped in order
+		 */
+		i = irq = 0;
+		while (i < apic)
+			irq += nr_ioapic_registers[i++];
+		irq += pin;
 
-			break;
-		}
-		default:
-		{
-			printk(KERN_ERR "unknown bus type %d.\n",bus); 
-			irq = 0;
-			break;
-		}
+		/*
+		 * For MPS mode, so far only needed by ES7000 platform
+		 */
+		if (ioapic_renumber_irq)
+			irq = ioapic_renumber_irq(apic, irq);
 	}
 
 	/*
@@ -1260,7 +1228,6 @@ static void __init setup_IO_APIC_irqs(void)
 {
 	struct IO_APIC_route_entry entry;
 	int apic, pin, idx, irq, first_notcon = 1, vector;
-	unsigned long flags;
 
 	apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
 
@@ -1326,9 +1293,7 @@ static void __init setup_IO_APIC_irqs(void)
 			if (!apic && (irq < 16))
 				disable_8259A_irq(irq);
 		}
-		spin_lock_irqsave(&ioapic_lock, flags);
-		__ioapic_write_entry(apic, pin, entry);
-		spin_unlock_irqrestore(&ioapic_lock, flags);
+		ioapic_write_entry(apic, pin, entry);
 	}
 	}
 
@@ -1524,8 +1489,8 @@ void /*__init*/ print_local_APIC(void * dummy)
 
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(v));
+	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v,
+			GET_APIC_ID(read_apic_id()));
 	v = apic_read(APIC_LVR);
 	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
 	ver = GET_APIC_VERSION(v);
@@ -1734,7 +1699,7 @@ void disable_IO_APIC(void)
 		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
 		entry.dest.physical.physical_dest =
-					GET_APIC_ID(apic_read(APIC_ID));
+					GET_APIC_ID(read_apic_id());
 
 		/*
 		 * Add it to the IO-APIC irq-routing table:
@@ -2031,8 +1996,7 @@ static inline void init_IO_APIC_traps(void)
 	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
 	 */
 	for (irq = 0; irq < NR_IRQS ; irq++) {
-		int tmp = irq;
-		if (IO_APIC_IRQ(tmp) && !irq_vector[tmp]) {
+		if (IO_APIC_IRQ(irq) && !irq_vector[irq]) {
 			/*
 			 * Hmm.. We don't have an entry for this,
 			 * so default to an old-fashioned 8259
@@ -2156,8 +2120,6 @@ static inline void unlock_ExtINT_logic(void)
 	ioapic_write_entry(apic, pin, entry0);
 }
 
-int timer_uses_ioapic_pin_0;
-
 /*
  * This code may look a bit paranoid, but it's supposed to cooperate with
  * a wide range of boards and BIOS bugs.  Fortunately only the timer IRQ
@@ -2168,10 +2130,14 @@ static inline void __init check_timer(void)
 {
 	int apic1, pin1, apic2, pin2;
 	int vector;
+	unsigned int ver;
 	unsigned long flags;
 
 	local_irq_save(flags);
 
+	ver = apic_read(APIC_LVR);
+	ver = GET_APIC_VERSION(ver);
+
 	/*
 	 * get/set the timer IRQ vector:
 	 */
@@ -2184,11 +2150,15 @@ static inline void __init check_timer(void)
 	 * mode for the 8259A whenever interrupts are routed
 	 * through I/O APICs.  Also IRQ0 has to be enabled in
 	 * the 8259A which implies the virtual wire has to be
-	 * disabled in the local APIC.
+	 * disabled in the local APIC.  Finally timer interrupts
+	 * need to be acknowledged manually in the 8259A for
+	 * timer_interrupt() and for the i82489DX when using
+	 * the NMI watchdog.
 	 */
 	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
-	timer_ack = 1;
+	timer_ack = !cpu_has_tsc;
+	timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
 	if (timer_over_8254 > 0)
 		enable_8259A_irq(0);
 
@@ -2197,9 +2167,6 @@ static inline void __init check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	if (pin1 == 0)
-		timer_uses_ioapic_pin_0 = 1;
-
 	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
 		vector, apic1, pin1, apic2, pin2);
 
@@ -2789,7 +2756,6 @@ int __init io_apic_get_redir_entries (int ioapic)
 int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low)
 {
 	struct IO_APIC_route_entry entry;
-	unsigned long flags;
 
 	if (!IO_APIC_IRQ(irq)) {
 		printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
@@ -2830,9 +2796,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	if (!ioapic && (irq < 16))
 		disable_8259A_irq(irq);
 
-	spin_lock_irqsave(&ioapic_lock, flags);
-	__ioapic_write_entry(ioapic, pin, entry);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	ioapic_write_entry(ioapic, pin, entry);
 
 	return 0;
 }
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index 1627c0d53e0b..9ba11d07920f 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -43,13 +43,15 @@
 #include <asm/smp.h>
 #include <asm/desc.h>
 #include <asm/proto.h>
-#include <asm/mach_apic.h>
 #include <asm/acpi.h>
 #include <asm/dma.h>
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
 
+#include <mach_ipi.h>
+#include <mach_apic.h>
+
 struct irq_cfg {
 	cpumask_t domain;
 	cpumask_t old_domain;
@@ -101,6 +103,16 @@ DEFINE_SPINLOCK(vector_lock);
  */
 int nr_ioapic_registers[MAX_IO_APICS];
 
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+int nr_ioapics;
+
+/* MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* # of MP IRQ source entries */
+int mp_irq_entries;
+
 /*
  * Rough estimation of how many shared IRQs there are, can
  * be changed anytime.
@@ -155,11 +167,10 @@ static inline void io_apic_modify(unsigned int apic, unsigned int value)
 	writel(value, &io_apic->data);
 }
 
-static int io_apic_level_ack_pending(unsigned int irq)
+static bool io_apic_level_ack_pending(unsigned int irq)
 {
 	struct irq_pin_list *entry;
 	unsigned long flags;
-	int pending = 0;
 
 	spin_lock_irqsave(&ioapic_lock, flags);
 	entry = irq_2_pin + irq;
@@ -172,13 +183,17 @@ static int io_apic_level_ack_pending(unsigned int irq)
 			break;
 		reg = io_apic_read(entry->apic, 0x10 + pin*2);
 		/* Is the remote IRR bit set? */
-		pending |= (reg >> 14) & 1;
+		if ((reg >> 14) & 1) {
+			spin_unlock_irqrestore(&ioapic_lock, flags);
+			return true;
+		}
 		if (!entry->next)
 			break;
 		entry = irq_2_pin + entry->next;
 	}
 	spin_unlock_irqrestore(&ioapic_lock, flags);
-	return pending;
+
+	return false;
 }
 
 /*
@@ -770,7 +785,7 @@ static void __clear_irq_vector(int irq)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
-	cfg->domain = CPU_MASK_NONE;
+	cpus_clear(cfg->domain);
 }
 
 void __setup_vector_irq(int cpu)
@@ -902,9 +917,8 @@ static void __init setup_IO_APIC_irqs(void)
 static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector)
 {
 	struct IO_APIC_route_entry entry;
-	unsigned long flags;
 
-	memset(&entry,0,sizeof(entry));
+	memset(&entry, 0, sizeof(entry));
 
 	disable_8259A_irq(0);
 
@@ -932,10 +946,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in
 	/*
 	 * Add it to the IO-APIC irq-routing table:
 	 */
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
-	io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	ioapic_write_entry(apic, pin, entry);
 
 	enable_8259A_irq(0);
 }
@@ -1066,8 +1077,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
 
 	printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n",
 		smp_processor_id(), hard_smp_processor_id());
-	v = apic_read(APIC_ID);
-	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(v));
+	printk(KERN_INFO "... APIC ID:      %08x (%01x)\n", v, GET_APIC_ID(read_apic_id()));
 	v = apic_read(APIC_LVR);
 	printk(KERN_INFO "... APIC VERSION: %08x\n", v);
 	ver = GET_APIC_VERSION(v);
@@ -1261,7 +1271,7 @@ void disable_IO_APIC(void)
 		entry.dest_mode       = 0; /* Physical */
 		entry.delivery_mode   = dest_ExtINT; /* ExtInt */
 		entry.vector          = 0;
-		entry.dest          = GET_APIC_ID(apic_read(APIC_ID));
+		entry.dest          = GET_APIC_ID(read_apic_id());
 
 		/*
 		 * Add it to the IO-APIC irq-routing table:
@@ -1352,9 +1362,7 @@ static int ioapic_retrigger_irq(unsigned int irq)
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	cpus_clear(mask);
-	cpu_set(first_cpu(cfg->domain), mask);
-
+	mask = cpumask_of_cpu(first_cpu(cfg->domain));
 	send_IPI_mask(mask, cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
@@ -1517,8 +1525,7 @@ static inline void init_IO_APIC_traps(void)
 	 * 0x80, because int 0x80 is hm, kind of importantish. ;)
 	 */
 	for (irq = 0; irq < NR_IRQS ; irq++) {
-		int tmp = irq;
-		if (IO_APIC_IRQ(tmp) && !irq_cfg[tmp].vector) {
+		if (IO_APIC_IRQ(irq) && !irq_cfg[irq].vector) {
 			/*
 			 * Hmm.. We don't have an entry for this,
 			 * so default to an old-fashioned 8259
@@ -1597,17 +1604,14 @@ static inline void unlock_ExtINT_logic(void)
 	int apic, pin, i;
 	struct IO_APIC_route_entry entry0, entry1;
 	unsigned char save_control, save_freq_select;
-	unsigned long flags;
 
 	pin  = find_isa_irq_pin(8, mp_INT);
 	apic = find_isa_irq_apic(8, mp_INT);
 	if (pin == -1)
 		return;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
-	*(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin);
-	*(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin);
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	entry0 = ioapic_read_entry(apic, pin);
+
 	clear_IO_APIC_pin(apic, pin);
 
 	memset(&entry1, 0, sizeof(entry1));
@@ -1620,10 +1624,7 @@ static inline void unlock_ExtINT_logic(void)
 	entry1.trigger = 0;
 	entry1.vector = 0;
 
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1));
-	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0));
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	ioapic_write_entry(apic, pin, entry1);
 
 	save_control = CMOS_READ(RTC_CONTROL);
 	save_freq_select = CMOS_READ(RTC_FREQ_SELECT);
@@ -1642,10 +1643,7 @@ static inline void unlock_ExtINT_logic(void)
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
 	clear_IO_APIC_pin(apic, pin);
 
-	spin_lock_irqsave(&ioapic_lock, flags);
-	io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1));
-	io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0));
-	spin_unlock_irqrestore(&ioapic_lock, flags);
+	ioapic_write_entry(apic, pin, entry0);
 }
 
 /*
@@ -2314,7 +2312,6 @@ static struct resource * __init ioapic_setup_resources(void)
 	res = (void *)mem;
 
 	if (mem != NULL) {
-		memset(mem, 0, n);
 		mem += sizeof(struct resource) * nr_ioapics;
 
 		for (i = 0; i < nr_ioapics; i++) {
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index c706a3061553..5921e5f0a640 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -78,6 +78,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
 	},
 	{
 		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "HP Pavilion dv6000",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30B8")
+		}
+	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
 		.ident		= "HP Pavilion tx1000",
 		.matches	= {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
new file mode 100644
index 000000000000..c0df7b89ca23
--- /dev/null
+++ b/arch/x86/kernel/ipi.c
@@ -0,0 +1,178 @@
+#include <linux/cpumask.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+
+#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/apic.h>
+#include <asm/proto.h>
+
+#ifdef CONFIG_X86_32
+#include <mach_apic.h>
+/*
+ * the following functions deal with sending IPIs between CPUs.
+ *
+ * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
+ */
+
+static inline int __prepare_ICR(unsigned int shortcut, int vector)
+{
+	unsigned int icr = shortcut | APIC_DEST_LOGICAL;
+
+	switch (vector) {
+	default:
+		icr |= APIC_DM_FIXED | vector;
+		break;
+	case NMI_VECTOR:
+		icr |= APIC_DM_NMI;
+		break;
+	}
+	return icr;
+}
+
+static inline int __prepare_ICR2(unsigned int mask)
+{
+	return SET_APIC_DEST_FIELD(mask);
+}
+
+void __send_IPI_shortcut(unsigned int shortcut, int vector)
+{
+	/*
+	 * Subtle. In the case of the 'never do double writes' workaround
+	 * we have to lock out interrupts to be safe.  As we don't care
+	 * of the value read we use an atomic rmw access to avoid costly
+	 * cli/sti.  Otherwise we use an even cheaper single atomic write
+	 * to the APIC.
+	 */
+	unsigned int cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	apic_wait_icr_idle();
+
+	/*
+	 * No need to touch the target chip field
+	 */
+	cfg = __prepare_ICR(shortcut, vector);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+}
+
+void send_IPI_self(int vector)
+{
+	__send_IPI_shortcut(APIC_DEST_SELF, vector);
+}
+
+/*
+ * This is used to send an IPI with no shorthand notation (the destination is
+ * specified in bits 56 to 63 of the ICR).
+ */
+static inline void __send_IPI_dest_field(unsigned long mask, int vector)
+{
+	unsigned long cfg;
+
+	/*
+	 * Wait for idle.
+	 */
+	if (unlikely(vector == NMI_VECTOR))
+		safe_apic_wait_icr_idle();
+	else
+		apic_wait_icr_idle();
+
+	/*
+	 * prepare target chip field
+	 */
+	cfg = __prepare_ICR2(mask);
+	apic_write_around(APIC_ICR2, cfg);
+
+	/*
+	 * program the ICR
+	 */
+	cfg = __prepare_ICR(0, vector);
+
+	/*
+	 * Send the IPI. The write to APIC_ICR fires this off.
+	 */
+	apic_write_around(APIC_ICR, cfg);
+}
+
+/*
+ * This is only used on smaller machines.
+ */
+void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
+{
+	unsigned long mask = cpus_addr(cpumask)[0];
+	unsigned long flags;
+
+	local_irq_save(flags);
+	WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]);
+	__send_IPI_dest_field(mask, vector);
+	local_irq_restore(flags);
+}
+
+void send_IPI_mask_sequence(cpumask_t mask, int vector)
+{
+	unsigned long flags;
+	unsigned int query_cpu;
+
+	/*
+	 * Hack. The clustered APIC addressing mode doesn't allow us to send
+	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This
+	 * should be modified to do 1 message per cluster ID - mbligh
+	 */
+
+	local_irq_save(flags);
+	for_each_possible_cpu(query_cpu) {
+		if (cpu_isset(query_cpu, mask)) {
+			__send_IPI_dest_field(cpu_to_logical_apicid(query_cpu),
+					      vector);
+		}
+	}
+	local_irq_restore(flags);
+}
+
+/* must come after the send_IPI functions above for inlining */
+#include <mach_ipi.h>
+static int convert_apicid_to_cpu(int apic_id)
+{
+	int i;
+
+	for_each_possible_cpu(i) {
+		if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
+			return i;
+	}
+	return -1;
+}
+
+int safe_smp_processor_id(void)
+{
+	int apicid, cpuid;
+
+	if (!boot_cpu_has(X86_FEATURE_APIC))
+		return 0;
+
+	apicid = hard_smp_processor_id();
+	if (apicid == BAD_APICID)
+		return 0;
+
+	cpuid = convert_apicid_to_cpu(apicid);
+
+	return cpuid >= 0 ? cpuid : 0;
+}
+#endif
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index cef054b09d27..6ea67b76a214 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -79,7 +79,7 @@ unsigned int do_IRQ(struct pt_regs *regs)
 
 	if (unlikely((unsigned)irq >= NR_IRQS)) {
 		printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
-					__FUNCTION__, irq);
+					__func__, irq);
 		BUG();
 	}
 
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
new file mode 100644
index 000000000000..f47f0eb886b8
--- /dev/null
+++ b/arch/x86/kernel/kgdb.c
@@ -0,0 +1,567 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ */
+
+/*
+ * Copyright (C) 2004 Amit S. Kale <amitkale@linsyssoft.com>
+ * Copyright (C) 2000-2001 VERITAS Software Corporation.
+ * Copyright (C) 2002 Andi Kleen, SuSE Labs
+ * Copyright (C) 2004 LinSysSoft Technologies Pvt. Ltd.
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ * Copyright (C) 2007-2008 Jason Wessel, Wind River Systems, Inc.
+ */
+/****************************************************************************
+ *  Contributor:     Lake Stevens Instrument Division$
+ *  Written by:      Glenn Engel $
+ *  Updated by:	     Amit Kale<akale@veritas.com>
+ *  Updated by:	     Tom Rini <trini@kernel.crashing.org>
+ *  Updated by:	     Jason Wessel <jason.wessel@windriver.com>
+ *  Modified for 386 by Jim Kingdon, Cygnus Support.
+ *  Origianl kgdb, compatibility with 2.1.xx kernel by
+ *  David Grothe <dave@gcom.com>
+ *  Integrated into 2.2.5 kernel by Tigran Aivazian <tigran@sco.com>
+ *  X86_64 changes from Andi Kleen's patch merged by Jim Houston
+ */
+#include <linux/spinlock.h>
+#include <linux/kdebug.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/kgdb.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/nmi.h>
+
+#include <asm/apicdef.h>
+#include <asm/system.h>
+
+#include <mach_ipi.h>
+
+/*
+ * Put the error code here just in case the user cares:
+ */
+static int gdb_x86errcode;
+
+/*
+ * Likewise, the vector number here (since GDB only gets the signal
+ * number through the usual means, and that's not very specific):
+ */
+static int gdb_x86vector = -1;
+
+/**
+ *	pt_regs_to_gdb_regs - Convert ptrace regs to GDB regs
+ *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
+ *	@regs: The &struct pt_regs of the current process.
+ *
+ *	Convert the pt_regs in @regs into the format for registers that
+ *	GDB expects, stored in @gdb_regs.
+ */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	gdb_regs[GDB_AX]	= regs->ax;
+	gdb_regs[GDB_BX]	= regs->bx;
+	gdb_regs[GDB_CX]	= regs->cx;
+	gdb_regs[GDB_DX]	= regs->dx;
+	gdb_regs[GDB_SI]	= regs->si;
+	gdb_regs[GDB_DI]	= regs->di;
+	gdb_regs[GDB_BP]	= regs->bp;
+	gdb_regs[GDB_PS]	= regs->flags;
+	gdb_regs[GDB_PC]	= regs->ip;
+#ifdef CONFIG_X86_32
+	gdb_regs[GDB_DS]	= regs->ds;
+	gdb_regs[GDB_ES]	= regs->es;
+	gdb_regs[GDB_CS]	= regs->cs;
+	gdb_regs[GDB_SS]	= __KERNEL_DS;
+	gdb_regs[GDB_FS]	= 0xFFFF;
+	gdb_regs[GDB_GS]	= 0xFFFF;
+#else
+	gdb_regs[GDB_R8]	= regs->r8;
+	gdb_regs[GDB_R9]	= regs->r9;
+	gdb_regs[GDB_R10]	= regs->r10;
+	gdb_regs[GDB_R11]	= regs->r11;
+	gdb_regs[GDB_R12]	= regs->r12;
+	gdb_regs[GDB_R13]	= regs->r13;
+	gdb_regs[GDB_R14]	= regs->r14;
+	gdb_regs[GDB_R15]	= regs->r15;
+#endif
+	gdb_regs[GDB_SP]	= regs->sp;
+}
+
+/**
+ *	sleeping_thread_to_gdb_regs - Convert ptrace regs to GDB regs
+ *	@gdb_regs: A pointer to hold the registers in the order GDB wants.
+ *	@p: The &struct task_struct of the desired process.
+ *
+ *	Convert the register values of the sleeping process in @p to
+ *	the format that GDB expects.
+ *	This function is called when kgdb does not have access to the
+ *	&struct pt_regs and therefore it should fill the gdb registers
+ *	@gdb_regs with what has	been saved in &struct thread_struct
+ *	thread field during switch_to.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	gdb_regs[GDB_AX]	= 0;
+	gdb_regs[GDB_BX]	= 0;
+	gdb_regs[GDB_CX]	= 0;
+	gdb_regs[GDB_DX]	= 0;
+	gdb_regs[GDB_SI]	= 0;
+	gdb_regs[GDB_DI]	= 0;
+	gdb_regs[GDB_BP]	= *(unsigned long *)p->thread.sp;
+#ifdef CONFIG_X86_32
+	gdb_regs[GDB_DS]	= __KERNEL_DS;
+	gdb_regs[GDB_ES]	= __KERNEL_DS;
+	gdb_regs[GDB_PS]	= 0;
+	gdb_regs[GDB_CS]	= __KERNEL_CS;
+	gdb_regs[GDB_PC]	= p->thread.ip;
+	gdb_regs[GDB_SS]	= __KERNEL_DS;
+	gdb_regs[GDB_FS]	= 0xFFFF;
+	gdb_regs[GDB_GS]	= 0xFFFF;
+#else
+	gdb_regs[GDB_PS]	= *(unsigned long *)(p->thread.sp + 8);
+	gdb_regs[GDB_PC]	= 0;
+	gdb_regs[GDB_R8]	= 0;
+	gdb_regs[GDB_R9]	= 0;
+	gdb_regs[GDB_R10]	= 0;
+	gdb_regs[GDB_R11]	= 0;
+	gdb_regs[GDB_R12]	= 0;
+	gdb_regs[GDB_R13]	= 0;
+	gdb_regs[GDB_R14]	= 0;
+	gdb_regs[GDB_R15]	= 0;
+#endif
+	gdb_regs[GDB_SP]	= p->thread.sp;
+}
+
+/**
+ *	gdb_regs_to_pt_regs - Convert GDB regs to ptrace regs.
+ *	@gdb_regs: A pointer to hold the registers we've received from GDB.
+ *	@regs: A pointer to a &struct pt_regs to hold these values in.
+ *
+ *	Convert the GDB regs in @gdb_regs into the pt_regs, and store them
+ *	in @regs.
+ */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	regs->ax		= gdb_regs[GDB_AX];
+	regs->bx		= gdb_regs[GDB_BX];
+	regs->cx		= gdb_regs[GDB_CX];
+	regs->dx		= gdb_regs[GDB_DX];
+	regs->si		= gdb_regs[GDB_SI];
+	regs->di		= gdb_regs[GDB_DI];
+	regs->bp		= gdb_regs[GDB_BP];
+	regs->flags		= gdb_regs[GDB_PS];
+	regs->ip		= gdb_regs[GDB_PC];
+#ifdef CONFIG_X86_32
+	regs->ds		= gdb_regs[GDB_DS];
+	regs->es		= gdb_regs[GDB_ES];
+	regs->cs		= gdb_regs[GDB_CS];
+#else
+	regs->r8		= gdb_regs[GDB_R8];
+	regs->r9		= gdb_regs[GDB_R9];
+	regs->r10		= gdb_regs[GDB_R10];
+	regs->r11		= gdb_regs[GDB_R11];
+	regs->r12		= gdb_regs[GDB_R12];
+	regs->r13		= gdb_regs[GDB_R13];
+	regs->r14		= gdb_regs[GDB_R14];
+	regs->r15		= gdb_regs[GDB_R15];
+#endif
+}
+
+static struct hw_breakpoint {
+	unsigned		enabled;
+	unsigned		type;
+	unsigned		len;
+	unsigned long		addr;
+} breakinfo[4];
+
+static void kgdb_correct_hw_break(void)
+{
+	unsigned long dr7;
+	int correctit = 0;
+	int breakbit;
+	int breakno;
+
+	get_debugreg(dr7, 7);
+	for (breakno = 0; breakno < 4; breakno++) {
+		breakbit = 2 << (breakno << 1);
+		if (!(dr7 & breakbit) && breakinfo[breakno].enabled) {
+			correctit = 1;
+			dr7 |= breakbit;
+			dr7 &= ~(0xf0000 << (breakno << 2));
+			dr7 |= ((breakinfo[breakno].len << 2) |
+				 breakinfo[breakno].type) <<
+			       ((breakno << 2) + 16);
+			if (breakno >= 0 && breakno <= 3)
+				set_debugreg(breakinfo[breakno].addr, breakno);
+
+		} else {
+			if ((dr7 & breakbit) && !breakinfo[breakno].enabled) {
+				correctit = 1;
+				dr7 &= ~breakbit;
+				dr7 &= ~(0xf0000 << (breakno << 2));
+			}
+		}
+	}
+	if (correctit)
+		set_debugreg(dr7, 7);
+}
+
+static int
+kgdb_remove_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		if (breakinfo[i].addr == addr && breakinfo[i].enabled)
+			break;
+	if (i == 4)
+		return -1;
+
+	breakinfo[i].enabled = 0;
+
+	return 0;
+}
+
+static void kgdb_remove_all_hw_break(void)
+{
+	int i;
+
+	for (i = 0; i < 4; i++)
+		memset(&breakinfo[i], 0, sizeof(struct hw_breakpoint));
+}
+
+static int
+kgdb_set_hw_break(unsigned long addr, int len, enum kgdb_bptype bptype)
+{
+	unsigned type;
+	int i;
+
+	for (i = 0; i < 4; i++)
+		if (!breakinfo[i].enabled)
+			break;
+	if (i == 4)
+		return -1;
+
+	switch (bptype) {
+	case BP_HARDWARE_BREAKPOINT:
+		type = 0;
+		len  = 1;
+		break;
+	case BP_WRITE_WATCHPOINT:
+		type = 1;
+		break;
+	case BP_ACCESS_WATCHPOINT:
+		type = 3;
+		break;
+	default:
+		return -1;
+	}
+
+	if (len == 1 || len == 2 || len == 4)
+		breakinfo[i].len  = len - 1;
+	else
+		return -1;
+
+	breakinfo[i].enabled = 1;
+	breakinfo[i].addr = addr;
+	breakinfo[i].type = type;
+
+	return 0;
+}
+
+/**
+ *	kgdb_disable_hw_debug - Disable hardware debugging while we in kgdb.
+ *	@regs: Current &struct pt_regs.
+ *
+ *	This function will be called if the particular architecture must
+ *	disable hardware debugging while it is processing gdb packets or
+ *	handling exception.
+ */
+void kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+	/* Disable hardware debugging while we are in kgdb: */
+	set_debugreg(0UL, 7);
+}
+
+/**
+ *	kgdb_post_primary_code - Save error vector/code numbers.
+ *	@regs: Original pt_regs.
+ *	@e_vector: Original error vector.
+ *	@err_code: Original error code.
+ *
+ *	This is needed on architectures which support SMP and KGDB.
+ *	This function is called after all the slave cpus have been put
+ *	to a know spin state and the primary CPU has control over KGDB.
+ */
+void kgdb_post_primary_code(struct pt_regs *regs, int e_vector, int err_code)
+{
+	/* primary processor is completely in the debugger */
+	gdb_x86vector = e_vector;
+	gdb_x86errcode = err_code;
+}
+
+#ifdef CONFIG_SMP
+/**
+ *	kgdb_roundup_cpus - Get other CPUs into a holding pattern
+ *	@flags: Current IRQ state
+ *
+ *	On SMP systems, we need to get the attention of the other CPUs
+ *	and get them be in a known state.  This should do what is needed
+ *	to get the other CPUs to call kgdb_wait(). Note that on some arches,
+ *	the NMI approach is not used for rounding up all the CPUs. For example,
+ *	in case of MIPS, smp_call_function() is used to roundup CPUs. In
+ *	this case, we have to make sure that interrupts are enabled before
+ *	calling smp_call_function(). The argument to this function is
+ *	the flags that will be used when restoring the interrupts. There is
+ *	local_irq_save() call before kgdb_roundup_cpus().
+ *
+ *	On non-SMP systems, this is not called.
+ */
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	send_IPI_allbutself(APIC_DM_NMI);
+}
+#endif
+
+/**
+ *	kgdb_arch_handle_exception - Handle architecture specific GDB packets.
+ *	@vector: The error vector of the exception that happened.
+ *	@signo: The signal number of the exception that happened.
+ *	@err_code: The error code of the exception that happened.
+ *	@remcom_in_buffer: The buffer of the packet we have read.
+ *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
+ *	@regs: The &struct pt_regs of the current process.
+ *
+ *	This function MUST handle the 'c' and 's' command packets,
+ *	as well packets to set / remove a hardware breakpoint, if used.
+ *	If there are additional packets which the hardware needs to handle,
+ *	they are handled here.  The code should return -1 if it wants to
+ *	process more packets, and a %0 or %1 if it wants to exit from the
+ *	kgdb callback.
+ */
+int kgdb_arch_handle_exception(int e_vector, int signo, int err_code,
+			       char *remcomInBuffer, char *remcomOutBuffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	unsigned long dr6;
+	char *ptr;
+	int newPC;
+
+	switch (remcomInBuffer[0]) {
+	case 'c':
+	case 's':
+		/* try to read optional parameter, pc unchanged if no parm */
+		ptr = &remcomInBuffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->ip = addr;
+	case 'D':
+	case 'k':
+		newPC = linux_regs->ip;
+
+		/* clear the trace bit */
+		linux_regs->flags &= ~X86_EFLAGS_TF;
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+
+		/* set the trace bit if we're stepping */
+		if (remcomInBuffer[0] == 's') {
+			linux_regs->flags |= X86_EFLAGS_TF;
+			kgdb_single_step = 1;
+			if (kgdb_contthread) {
+				atomic_set(&kgdb_cpu_doing_single_step,
+					   raw_smp_processor_id());
+			}
+		}
+
+		get_debugreg(dr6, 6);
+		if (!(dr6 & 0x4000)) {
+			int breakno;
+
+			for (breakno = 0; breakno < 4; breakno++) {
+				if (dr6 & (1 << breakno) &&
+				    breakinfo[breakno].type == 0) {
+					/* Set restore flag: */
+					linux_regs->flags |= X86_EFLAGS_RF;
+					break;
+				}
+			}
+		}
+		set_debugreg(0UL, 6);
+		kgdb_correct_hw_break();
+
+		return 0;
+	}
+
+	/* this means that we do not want to exit from the handler: */
+	return -1;
+}
+
+static inline int
+single_step_cont(struct pt_regs *regs, struct die_args *args)
+{
+	/*
+	 * Single step exception from kernel space to user space so
+	 * eat the exception and continue the process:
+	 */
+	printk(KERN_ERR "KGDB: trap/step from kernel to user space, "
+			"resuming...\n");
+	kgdb_arch_handle_exception(args->trapnr, args->signr,
+				   args->err, "c", "", regs);
+
+	return NOTIFY_STOP;
+}
+
+static int was_in_debug_nmi[NR_CPUS];
+
+static int __kgdb_notify(struct die_args *args, unsigned long cmd)
+{
+	struct pt_regs *regs = args->regs;
+
+	switch (cmd) {
+	case DIE_NMI:
+		if (atomic_read(&kgdb_active) != -1) {
+			/* KGDB CPU roundup */
+			kgdb_nmicallback(raw_smp_processor_id(), regs);
+			was_in_debug_nmi[raw_smp_processor_id()] = 1;
+			touch_nmi_watchdog();
+			return NOTIFY_STOP;
+		}
+		return NOTIFY_DONE;
+
+	case DIE_NMI_IPI:
+		if (atomic_read(&kgdb_active) != -1) {
+			/* KGDB CPU roundup */
+			kgdb_nmicallback(raw_smp_processor_id(), regs);
+			was_in_debug_nmi[raw_smp_processor_id()] = 1;
+			touch_nmi_watchdog();
+		}
+		return NOTIFY_DONE;
+
+	case DIE_NMIUNKNOWN:
+		if (was_in_debug_nmi[raw_smp_processor_id()]) {
+			was_in_debug_nmi[raw_smp_processor_id()] = 0;
+			return NOTIFY_STOP;
+		}
+		return NOTIFY_DONE;
+
+	case DIE_NMIWATCHDOG:
+		if (atomic_read(&kgdb_active) != -1) {
+			/* KGDB CPU roundup: */
+			kgdb_nmicallback(raw_smp_processor_id(), regs);
+			return NOTIFY_STOP;
+		}
+		/* Enter debugger: */
+		break;
+
+	case DIE_DEBUG:
+		if (atomic_read(&kgdb_cpu_doing_single_step) ==
+			raw_smp_processor_id() &&
+			user_mode(regs))
+			return single_step_cont(regs, args);
+		/* fall through */
+	default:
+		if (user_mode(regs))
+			return NOTIFY_DONE;
+	}
+
+	if (kgdb_handle_exception(args->trapnr, args->signr, args->err, regs))
+		return NOTIFY_DONE;
+
+	/* Must touch watchdog before return to normal operation */
+	touch_nmi_watchdog();
+	return NOTIFY_STOP;
+}
+
+static int
+kgdb_notify(struct notifier_block *self, unsigned long cmd, void *ptr)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+	ret = __kgdb_notify(ptr, cmd);
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call	= kgdb_notify,
+
+	/*
+	 * Lowest-prio notifier priority, we want to be notified last:
+	 */
+	.priority	= -INT_MAX,
+};
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	return register_die_notifier(&kgdb_notifier);
+}
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
+
+/**
+ *
+ *	kgdb_skipexception - Bail out of KGDB when we've been triggered.
+ *	@exception: Exception vector number
+ *	@regs: Current &struct pt_regs.
+ *
+ *	On some architectures we need to skip a breakpoint exception when
+ *	it occurs after a breakpoint has been removed.
+ *
+ * Skip an int3 exception when it occurs after a breakpoint has been
+ * removed. Backtrack eip by 1 since the int3 would have caused it to
+ * increment by 1.
+ */
+int kgdb_skipexception(int exception, struct pt_regs *regs)
+{
+	if (exception == 3 && kgdb_isremovedbreak(regs->ip - 1)) {
+		regs->ip -= 1;
+		return 1;
+	}
+	return 0;
+}
+
+unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
+{
+	if (exception == 3)
+		return instruction_pointer(regs) - 1;
+	return instruction_pointer(regs);
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+	/* Breakpoint instruction: */
+	.gdb_bpt_instr		= { 0xcc },
+	.flags			= KGDB_HW_BREAKPOINT,
+	.set_hw_breakpoint	= kgdb_set_hw_break,
+	.remove_hw_breakpoint	= kgdb_remove_hw_break,
+	.remove_all_hw_break	= kgdb_remove_all_hw_break,
+	.correct_hw_break	= kgdb_correct_hw_break,
+};
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index 34a591283f5d..b8c6743a13da 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -410,13 +410,13 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 static void __kprobes clear_btf(void)
 {
 	if (test_thread_flag(TIF_DEBUGCTLMSR))
-		wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
+		update_debugctlmsr(0);
 }
 
 static void __kprobes restore_btf(void)
 {
 	if (test_thread_flag(TIF_DEBUGCTLMSR))
-		wrmsrl(MSR_IA32_DEBUGCTLMSR, current->thread.debugctlmsr);
+		update_debugctlmsr(current->thread.debugctlmsr);
 }
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
@@ -489,7 +489,7 @@ static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
 		break;
 	case KPROBE_HIT_SS:
 		if (p == kprobe_running()) {
-			regs->flags &= ~TF_MASK;
+			regs->flags &= ~X86_EFLAGS_TF;
 			regs->flags |= kcb->kprobe_saved_flags;
 			return 0;
 		} else {
@@ -858,15 +858,15 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 	if (!cur)
 		return 0;
 
+	resume_execution(cur, regs, kcb);
+	regs->flags |= kcb->kprobe_saved_flags;
+	trace_hardirqs_fixup_flags(regs->flags);
+
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
 		cur->post_handler(cur, regs, 0);
 	}
 
-	resume_execution(cur, regs, kcb);
-	regs->flags |= kcb->kprobe_saved_flags;
-	trace_hardirqs_fixup_flags(regs->flags);
-
 	/* Restore back the original saved kprobes variables and continue. */
 	if (kcb->kprobe_status == KPROBE_REENTER) {
 		restore_previous_kprobe(kcb);
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 236d2f8f7ddc..576a03db4511 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -233,6 +233,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 
 void arch_crash_save_vmcoreinfo(void)
 {
+	VMCOREINFO_SYMBOL(phys_base);
 	VMCOREINFO_SYMBOL(init_level4_pgt);
 
 #ifdef CONFIG_NUMA
diff --git a/arch/x86/kernel/mca_32.c b/arch/x86/kernel/mca_32.c
index 9482033ed0fe..2dc183758be3 100644
--- a/arch/x86/kernel/mca_32.c
+++ b/arch/x86/kernel/mca_32.c
@@ -53,9 +53,9 @@
 #include <linux/init.h>
 #include <asm/arch_hooks.h>
 
-static unsigned char which_scsi = 0;
+static unsigned char which_scsi;
 
-int MCA_bus = 0;
+int MCA_bus;
 EXPORT_SYMBOL(MCA_bus);
 
 /*
@@ -68,15 +68,17 @@ static DEFINE_SPINLOCK(mca_lock);
 
 /* Build the status info for the adapter */
 
-static void mca_configure_adapter_status(struct mca_device *mca_dev) {
+static void mca_configure_adapter_status(struct mca_device *mca_dev)
+{
 	mca_dev->status = MCA_ADAPTER_NONE;
 
 	mca_dev->pos_id = mca_dev->pos[0]
 		+ (mca_dev->pos[1] << 8);
 
-	if(!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
+	if (!mca_dev->pos_id && mca_dev->slot < MCA_MAX_SLOT_NR) {
 
-		/* id = 0x0000 usually indicates hardware failure,
+		/*
+		 * id = 0x0000 usually indicates hardware failure,
 		 * however, ZP Gu (zpg@castle.net> reports that his 9556
 		 * has 0x0000 as id and everything still works. There
 		 * also seem to be an adapter with id = 0x0000; the
@@ -87,9 +89,10 @@ static void mca_configure_adapter_status(struct mca_device *mca_dev) {
 		mca_dev->status = MCA_ADAPTER_ERROR;
 
 		return;
-	} else if(mca_dev->pos_id != 0xffff) {
+	} else if (mca_dev->pos_id != 0xffff) {
 
-		/* 0xffff usually indicates that there's no adapter,
+		/*
+		 * 0xffff usually indicates that there's no adapter,
 		 * however, some integrated adapters may have 0xffff as
 		 * their id and still be valid. Examples are on-board
 		 * VGA of the 55sx, the integrated SCSI of the 56 & 57,
@@ -99,19 +102,19 @@ static void mca_configure_adapter_status(struct mca_device *mca_dev) {
 		mca_dev->status = MCA_ADAPTER_NORMAL;
 	}
 
-	if((mca_dev->pos_id == 0xffff ||
+	if ((mca_dev->pos_id == 0xffff ||
 	    mca_dev->pos_id == 0x0000) && mca_dev->slot >= MCA_MAX_SLOT_NR) {
 		int j;
 
-		for(j = 2; j < 8; j++) {
-			if(mca_dev->pos[j] != 0xff) {
+		for (j = 2; j < 8; j++) {
+			if (mca_dev->pos[j] != 0xff) {
 				mca_dev->status = MCA_ADAPTER_NORMAL;
 				break;
 			}
 		}
 	}
 
-	if(!(mca_dev->pos[2] & MCA_ENABLED)) {
+	if (!(mca_dev->pos[2] & MCA_ENABLED)) {
 
 		/* enabled bit is in POS 2 */
 
@@ -133,7 +136,7 @@ static struct resource mca_standard_resources[] = {
 
 #define MCA_STANDARD_RESOURCES	ARRAY_SIZE(mca_standard_resources)
 
-/**
+/*
  *	mca_read_and_store_pos - read the POS registers into a memory buffer
  *      @pos: a char pointer to 8 bytes, contains the POS register value on
  *            successful return
@@ -141,12 +144,14 @@ static struct resource mca_standard_resources[] = {
  *	Returns 1 if a card actually exists (i.e. the pos isn't
  *	all 0xff) or 0 otherwise
  */
-static int mca_read_and_store_pos(unsigned char *pos) {
+static int mca_read_and_store_pos(unsigned char *pos)
+{
 	int j;
 	int found = 0;
 
-	for(j=0; j<8; j++) {
-		if((pos[j] = inb_p(MCA_POS_REG(j))) != 0xff) {
+	for (j = 0; j < 8; j++) {
+		pos[j] = inb_p(MCA_POS_REG(j));
+		if (pos[j] != 0xff) {
 			/* 0xff all across means no device. 0x00 means
 			 * something's broken, but a device is
 			 * probably there.  However, if you get 0x00
@@ -167,11 +172,11 @@ static unsigned char mca_pc_read_pos(struct mca_device *mca_dev, int reg)
 	unsigned char byte;
 	unsigned long flags;
 
-	if(reg < 0 || reg >= 8)
+	if (reg < 0 || reg >= 8)
 		return 0;
 
 	spin_lock_irqsave(&mca_lock, flags);
-	if(mca_dev->pos_register) {
+	if (mca_dev->pos_register) {
 		/* Disable adapter setup, enable motherboard setup */
 
 		outb_p(0, MCA_ADAPTER_SETUP_REG);
@@ -203,7 +208,7 @@ static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
 {
 	unsigned long flags;
 
-	if(reg < 0 || reg >= 8)
+	if (reg < 0 || reg >= 8)
 		return;
 
 	spin_lock_irqsave(&mca_lock, flags);
@@ -227,17 +232,17 @@ static void mca_pc_write_pos(struct mca_device *mca_dev, int reg,
 }
 
 /* for the primary MCA bus, we have identity transforms */
-static int mca_dummy_transform_irq(struct mca_device * mca_dev, int irq)
+static int mca_dummy_transform_irq(struct mca_device *mca_dev, int irq)
 {
 	return irq;
 }
 
-static int mca_dummy_transform_ioport(struct mca_device * mca_dev, int port)
+static int mca_dummy_transform_ioport(struct mca_device *mca_dev, int port)
 {
 	return port;
 }
 
-static void *mca_dummy_transform_memory(struct mca_device * mca_dev, void *mem)
+static void *mca_dummy_transform_memory(struct mca_device *mca_dev, void *mem)
 {
 	return mem;
 }
@@ -251,7 +256,8 @@ static int __init mca_init(void)
 	short mca_builtin_scsi_ports[] = {0xf7, 0xfd, 0x00};
 	struct mca_bus *bus;
 
-	/* WARNING: Be careful when making changes here. Putting an adapter
+	/*
+	 * WARNING: Be careful when making changes here. Putting an adapter
 	 * and the motherboard simultaneously into setup mode may result in
 	 * damage to chips (according to The Indispensible PC Hardware Book
 	 * by Hans-Peter Messmer). Also, we disable system interrupts (so
@@ -283,7 +289,7 @@ static int __init mca_init(void)
 
 	/* get the motherboard device */
 	mca_dev = kzalloc(sizeof(struct mca_device), GFP_KERNEL);
-	if(unlikely(!mca_dev))
+	if (unlikely(!mca_dev))
 		goto out_nomem;
 
 	/*
@@ -309,7 +315,7 @@ static int __init mca_init(void)
 	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
 
 	mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-	if(unlikely(!mca_dev))
+	if (unlikely(!mca_dev))
 		goto out_unlock_nomem;
 
 	/* Put motherboard into video setup mode, read integrated video
@@ -326,7 +332,8 @@ static int __init mca_init(void)
 	mca_dev->slot = MCA_INTEGVIDEO;
 	mca_register_device(MCA_PRIMARY_BUS, mca_dev);
 
-	/* Put motherboard into scsi setup mode, read integrated scsi
+	/*
+	 * Put motherboard into scsi setup mode, read integrated scsi
 	 * POS registers, and turn motherboard setup off.
 	 *
 	 * It seems there are two possible SCSI registers. Martin says that
@@ -338,18 +345,18 @@ static int __init mca_init(void)
 	 * machine.
 	 */
 
-	for(i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
+	for (i = 0; (which_scsi = mca_builtin_scsi_ports[i]) != 0; i++) {
 		outb_p(which_scsi, MCA_MOTHERBOARD_SETUP_REG);
-		if(mca_read_and_store_pos(pos))
+		if (mca_read_and_store_pos(pos))
 			break;
 	}
-	if(which_scsi) {
+	if (which_scsi) {
 		/* found a scsi card */
 		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-		if(unlikely(!mca_dev))
+		if (unlikely(!mca_dev))
 			goto out_unlock_nomem;
 
-		for(j = 0; j < 8; j++)
+		for (j = 0; j < 8; j++)
 			mca_dev->pos[j] = pos[j];
 
 		mca_configure_adapter_status(mca_dev);
@@ -364,21 +371,22 @@ static int __init mca_init(void)
 
 	outb_p(0xff, MCA_MOTHERBOARD_SETUP_REG);
 
-	/* Now loop over MCA slots: put each adapter into setup mode, and
+	/*
+	 * Now loop over MCA slots: put each adapter into setup mode, and
 	 * read its POS registers. Then put adapter setup off.
 	 */
 
-	for(i=0; i<MCA_MAX_SLOT_NR; i++) {
+	for (i = 0; i < MCA_MAX_SLOT_NR; i++) {
 		outb_p(0x8|(i&0xf), MCA_ADAPTER_SETUP_REG);
-		if(!mca_read_and_store_pos(pos))
+		if (!mca_read_and_store_pos(pos))
 			continue;
 
 		mca_dev = kzalloc(sizeof(struct mca_device), GFP_ATOMIC);
-		if(unlikely(!mca_dev))
+		if (unlikely(!mca_dev))
 			goto out_unlock_nomem;
 
-		for(j=0; j<8; j++)
-			mca_dev->pos[j]=pos[j];
+		for (j = 0; j < 8; j++)
+			mca_dev->pos[j] = pos[j];
 
 		mca_dev->driver_loaded = 0;
 		mca_dev->slot = i;
@@ -414,20 +422,20 @@ mca_handle_nmi_device(struct mca_device *mca_dev, int check_flag)
 {
 	int slot = mca_dev->slot;
 
-	if(slot == MCA_INTEGSCSI) {
+	if (slot == MCA_INTEGSCSI) {
 		printk(KERN_CRIT "NMI: caused by MCA integrated SCSI adapter (%s)\n",
 			mca_dev->name);
-	} else if(slot == MCA_INTEGVIDEO) {
+	} else if (slot == MCA_INTEGVIDEO) {
 		printk(KERN_CRIT "NMI: caused by MCA integrated video adapter (%s)\n",
 			mca_dev->name);
-	} else if(slot == MCA_MOTHERBOARD) {
+	} else if (slot == MCA_MOTHERBOARD) {
 		printk(KERN_CRIT "NMI: caused by motherboard (%s)\n",
 			mca_dev->name);
 	}
 
 	/* More info available in POS 6 and 7? */
 
-	if(check_flag) {
+	if (check_flag) {
 		unsigned char pos6, pos7;
 
 		pos6 = mca_device_read_pos(mca_dev, 6);
@@ -447,8 +455,9 @@ static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
 
 	pos5 = mca_device_read_pos(mca_dev, 5);
 
-	if(!(pos5 & 0x80)) {
-		/* Bit 7 of POS 5 is reset when this adapter has a hardware
+	if (!(pos5 & 0x80)) {
+		/*
+		 *  Bit 7 of POS 5 is reset when this adapter has a hardware
 		 * error. Bit 7 it reset if there's error information
 		 * available in POS 6 and 7.
 		 */
@@ -460,7 +469,8 @@ static int __kprobes mca_handle_nmi_callback(struct device *dev, void *data)
 
 void __kprobes mca_handle_nmi(void)
 {
-	/* First try - scan the various adapters and see if a specific
+	/*
+	 *  First try - scan the various adapters and see if a specific
 	 * adapter was responsible for the error.
 	 */
 	bus_for_each_dev(&mca_bus_type, NULL, NULL, mca_handle_nmi_callback);
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 027fc067b399..b402c0f3f192 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -30,6 +30,7 @@
 
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <asm/geode.h>
 
 static struct mfgpt_timer_t {
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index f2702d01b8a8..69729e38b78a 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -290,7 +290,7 @@ static int get_maching_microcode(void *mc, int cpu)
 	}
 	return 0;
 find:
-	pr_debug("microcode: CPU %d found a matching microcode update with"
+	pr_debug("microcode: CPU%d found a matching microcode update with"
 		" version 0x%x (current=0x%x)\n", cpu, mc_header->rev,uci->rev);
 	new_mc = vmalloc(total_size);
 	if (!new_mc) {
@@ -336,11 +336,11 @@ static void apply_microcode(int cpu)
 
 	spin_unlock_irqrestore(&microcode_update_lock, flags);
 	if (val[1] != uci->mc->hdr.rev) {
-		printk(KERN_ERR "microcode: CPU%d updated from revision "
+		printk(KERN_ERR "microcode: CPU%d update from revision "
 			"0x%x to 0x%x failed\n", cpu_num, uci->rev, val[1]);
 		return;
 	}
-	pr_debug("microcode: CPU%d updated from revision "
+	printk(KERN_INFO "microcode: CPU%d updated from revision "
 	       "0x%x to 0x%x, date = %08x \n", 
 	       cpu_num, uci->rev, val[1], uci->mc->hdr.date);
 	uci->rev = val[1];
@@ -402,7 +402,7 @@ static int do_microcode_update (void)
 
 			if (!uci->valid)
 				continue;
-			set_cpus_allowed(current, cpumask_of_cpu(cpu));
+			set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 			error = get_maching_microcode(new_mc, cpu);
 			if (error < 0)
 				goto out;
@@ -416,7 +416,7 @@ out:
 		vfree(new_mc);
 	if (cursor < 0)
 		error = cursor;
-	set_cpus_allowed(current, old);
+	set_cpus_allowed_ptr(current, &old);
 	return error;
 }
 
@@ -534,7 +534,7 @@ static int cpu_request_microcode(int cpu)
 		c->x86, c->x86_model, c->x86_mask);
 	error = request_firmware(&firmware, name, &microcode_pdev->dev);
 	if (error) {
-		pr_debug("ucode data file %s load failed\n", name);
+		pr_debug("microcode: ucode data file %s load failed\n", name);
 		return error;
 	}
 	buf = firmware->data;
@@ -579,7 +579,7 @@ static int apply_microcode_check_cpu(int cpu)
 		return 0;
 
 	old = current->cpus_allowed;
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 	/* Check if the microcode we have in memory matches the CPU */
 	if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
@@ -610,7 +610,7 @@ static int apply_microcode_check_cpu(int cpu)
 			" sig=0x%x, pf=0x%x, rev=0x%x\n",
 			cpu, uci->sig, uci->pf, uci->rev);
 
-	set_cpus_allowed(current, old);
+	set_cpus_allowed_ptr(current, &old);
 	return err;
 }
 
@@ -621,13 +621,13 @@ static void microcode_init_cpu(int cpu, int resume)
 
 	old = current->cpus_allowed;
 
-	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 	mutex_lock(&microcode_mutex);
 	collect_cpu_info(cpu);
 	if (uci->valid && system_state == SYSTEM_RUNNING && !resume)
 		cpu_request_microcode(cpu);
 	mutex_unlock(&microcode_mutex);
-	set_cpus_allowed(current, old);
+	set_cpus_allowed_ptr(current, &old);
 }
 
 static void microcode_fini_cpu(int cpu)
@@ -657,14 +657,14 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 		old = current->cpus_allowed;
 
 		get_online_cpus();
-		set_cpus_allowed(current, cpumask_of_cpu(cpu));
+		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
 
 		mutex_lock(&microcode_mutex);
 		if (uci->valid)
 			err = cpu_request_microcode(cpu);
 		mutex_unlock(&microcode_mutex);
 		put_online_cpus();
-		set_cpus_allowed(current, old);
+		set_cpus_allowed_ptr(current, &old);
 	}
 	if (err)
 		return err;
@@ -709,7 +709,7 @@ static int __mc_sysdev_add(struct sys_device *sys_dev, int resume)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("Microcode:CPU %d added\n", cpu);
+	pr_debug("microcode: CPU%d added\n", cpu);
 	memset(uci, 0, sizeof(*uci));
 
 	err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
@@ -733,7 +733,7 @@ static int mc_sysdev_remove(struct sys_device *sys_dev)
 	if (!cpu_online(cpu))
 		return 0;
 
-	pr_debug("Microcode:CPU %d removed\n", cpu);
+	pr_debug("microcode: CPU%d removed\n", cpu);
 	microcode_fini_cpu(cpu);
 	sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
 	return 0;
@@ -745,7 +745,7 @@ static int mc_sysdev_resume(struct sys_device *dev)
 
 	if (!cpu_online(cpu))
 		return 0;
-	pr_debug("Microcode:CPU %d resumed\n", cpu);
+	pr_debug("microcode: CPU%d resumed\n", cpu);
 	/* only CPU 0 will apply ucode here */
 	apply_microcode(0);
 	return 0;
@@ -783,7 +783,7 @@ mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
 		}
 	case CPU_DOWN_FAILED_FROZEN:
 		if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
-			printk(KERN_ERR "Microcode: Failed to create the sysfs "
+			printk(KERN_ERR "microcode: Failed to create the sysfs "
 				"group for CPU%d\n", cpu);
 		break;
 	case CPU_DOWN_PREPARE:
diff --git a/arch/x86/kernel/mpparse_32.c b/arch/x86/kernel/mpparse.c
index f349e68e45a0..70744e344fa1 100644
--- a/arch/x86/kernel/mpparse_32.c
+++ b/arch/x86/kernel/mpparse.c
@@ -4,82 +4,56 @@
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
  *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *		Alan Cox	:	Added EBDA scanning
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Maciej W. Rozycki:	Bits for default MP configurations
- *		Paul Diefenbaugh:	Added full ACPI support
+ *      (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
  */
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/bootmem.h>
 #include <linux/kernel_stat.h>
 #include <linux/mc146818rtc.h>
 #include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/module.h>
 
 #include <asm/smp.h>
-#include <asm/acpi.h>
 #include <asm/mtrr.h>
 #include <asm/mpspec.h>
+#include <asm/pgalloc.h>
 #include <asm/io_apic.h>
+#include <asm/proto.h>
+#include <asm/acpi.h>
+#include <asm/bios_ebda.h>
 
 #include <mach_apic.h>
+#ifdef CONFIG_X86_32
 #include <mach_apicdef.h>
 #include <mach_mpparse.h>
-#include <bios_ebda.h>
+#endif
 
 /* Have we found an MP table */
 int smp_found_config;
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
 
 /*
  * Various Linux-internal data structures created from the
  * MP-table.
  */
-int apic_version [MAX_APICS];
-int mp_bus_id_to_type [MAX_MP_BUSSES];
-int mp_bus_id_to_node [MAX_MP_BUSSES];
-int mp_bus_id_to_local [MAX_MP_BUSSES];
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-static int mp_current_pci_id;
-
-/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+int mp_bus_id_to_type[MAX_MP_BUSSES];
+#endif
 
-/* MP IRQ source entries */
-int mp_irq_entries;
+DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
+int mp_bus_id_to_pci_bus[MAX_MP_BUSSES] = {[0 ... MAX_MP_BUSSES - 1] = -1 };
 
-int nr_ioapics;
+static int mp_current_pci_id;
 
 int pic_mode;
-unsigned long mp_lapic_addr;
-
-unsigned int def_to_bigsmp = 0;
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-/* Internal processor count */
-unsigned int num_processors;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
-
-u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
 
 /*
  * Intel MP BIOS table parsing routines:
  */
 
-
 /*
  * Checksum an MP configuration block.
  */
@@ -94,216 +68,153 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
+#ifdef CONFIG_X86_NUMAQ
 /*
  * Have to match translation table entries to main table entries by counter
  * hence the mpc_record variable .... can't see a less disgusting way of
  * doing this ....
  */
 
-static int mpc_record; 
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+    __cpuinitdata;
+#endif
 
-static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
+static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 {
- 	int ver, apicid;
-	physid_mask_t phys_cpu;
- 	
-	if (!(m->mpc_cpuflag & CPU_ENABLED))
-		return;
+	int apicid;
+	char *bootup_cpu = "";
 
+	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
+		disabled_cpus++;
+		return;
+	}
+#ifdef CONFIG_X86_NUMAQ
 	apicid = mpc_apic_id(m, translation_table[mpc_record]);
-
-	if (m->mpc_featureflag&(1<<0))
-		Dprintk("    Floating point unit present.\n");
-	if (m->mpc_featureflag&(1<<7))
-		Dprintk("    Machine Exception supported.\n");
-	if (m->mpc_featureflag&(1<<8))
-		Dprintk("    64 bit compare & exchange supported.\n");
-	if (m->mpc_featureflag&(1<<9))
-		Dprintk("    Internal APIC present.\n");
-	if (m->mpc_featureflag&(1<<11))
-		Dprintk("    SEP present.\n");
-	if (m->mpc_featureflag&(1<<12))
-		Dprintk("    MTRR  present.\n");
-	if (m->mpc_featureflag&(1<<13))
-		Dprintk("    PGE  present.\n");
-	if (m->mpc_featureflag&(1<<14))
-		Dprintk("    MCA  present.\n");
-	if (m->mpc_featureflag&(1<<15))
-		Dprintk("    CMOV  present.\n");
-	if (m->mpc_featureflag&(1<<16))
-		Dprintk("    PAT  present.\n");
-	if (m->mpc_featureflag&(1<<17))
-		Dprintk("    PSE  present.\n");
-	if (m->mpc_featureflag&(1<<18))
-		Dprintk("    PSN  present.\n");
-	if (m->mpc_featureflag&(1<<19))
-		Dprintk("    Cache Line Flush Instruction present.\n");
-	/* 20 Reserved */
-	if (m->mpc_featureflag&(1<<21))
-		Dprintk("    Debug Trace and EMON Store present.\n");
-	if (m->mpc_featureflag&(1<<22))
-		Dprintk("    ACPI Thermal Throttle Registers  present.\n");
-	if (m->mpc_featureflag&(1<<23))
-		Dprintk("    MMX  present.\n");
-	if (m->mpc_featureflag&(1<<24))
-		Dprintk("    FXSR  present.\n");
-	if (m->mpc_featureflag&(1<<25))
-		Dprintk("    XMM  present.\n");
-	if (m->mpc_featureflag&(1<<26))
-		Dprintk("    Willamette New Instructions  present.\n");
-	if (m->mpc_featureflag&(1<<27))
-		Dprintk("    Self Snoop  present.\n");
-	if (m->mpc_featureflag&(1<<28))
-		Dprintk("    HT  present.\n");
-	if (m->mpc_featureflag&(1<<29))
-		Dprintk("    Thermal Monitor present.\n");
-	/* 30, 31 Reserved */
-
-
+#else
+	apicid = m->mpc_apicid;
+#endif
 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
-		Dprintk("    Bootup CPU\n");
+		bootup_cpu = " (Bootup-CPU)";
 		boot_cpu_physical_apicid = m->mpc_apicid;
 	}
 
-	ver = m->mpc_apicver;
-
-	/*
-	 * Validate version
-	 */
-	if (ver == 0x0) {
-		printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
-				"fixing up to 0x10. (tell your hw vendor)\n",
-				m->mpc_apicid);
-		ver = 0x10;
-	}
-	apic_version[m->mpc_apicid] = ver;
-
-	phys_cpu = apicid_to_cpu_present(apicid);
-	physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			"  Processor ignored.\n", NR_CPUS);
-		return;
-	}
-
-	if (num_processors >= maxcpus) {
-		printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
-			" Processor ignored.\n", maxcpus);
-		return;
-	}
-
-	cpu_set(num_processors, cpu_possible_map);
-	num_processors++;
-
-	/*
-	 * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
-	 * but we need to work other dependencies like SMP_SUSPEND etc
-	 * before this can be done without some confusion.
-	 * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
-	 *       - Ashok Raj <ashok.raj@intel.com>
-	 */
-	if (num_processors > 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(ver)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-	bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+	printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
+	generic_processor_info(apicid, m->mpc_apicver);
 }
 
-static void __init MP_bus_info (struct mpc_config_bus *m)
+static void __init MP_bus_info(struct mpc_config_bus *m)
 {
 	char str[7];
 
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 
+#ifdef CONFIG_X86_NUMAQ
 	mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+#else
+	Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
+#endif
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {
 		printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
-			" is too large, max. supported is %d\n",
-			m->mpc_busid, str, MAX_MP_BUSSES - 1);
+		       " is too large, max. supported is %d\n",
+		       m->mpc_busid, str, MAX_MP_BUSSES - 1);
 		return;
 	}
 #endif
 
-	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
+	if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
+		 set_bit(m->mpc_busid, mp_bus_not_pci);
+#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
-	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
-		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
-	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
+#endif
+	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
+#ifdef CONFIG_X86_NUMAQ
 		mpc_oem_pci_bus(m, translation_table[mpc_record]);
-		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+#endif
+		clear_bit(m->mpc_busid, mp_bus_not_pci);
 		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
 		mp_current_pci_id++;
-	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
+#if defined(CONFIG_EISA) || defined (CONFIG_MCA)
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+	} else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
+		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+	} else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA) - 1) == 0) {
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
-	} else {
+#endif
+	} else
 		printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
+}
+
+#ifdef CONFIG_X86_IO_APIC
+
+static int bad_ioapic(unsigned long address)
+{
+	if (nr_ioapics >= MAX_IO_APICS) {
+		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+	}
+	if (!address) {
+		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+		       " found in table, skipping!\n");
+		return 1;
 	}
+	return 0;
 }
 
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
+static void __init MP_ioapic_info(struct mpc_config_ioapic *m)
 {
 	if (!(m->mpc_flags & MPC_APIC_USABLE))
 		return;
 
 	printk(KERN_INFO "I/O APIC #%d Version %d at 0x%X.\n",
-		m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
-			MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
-	}
-	if (!m->mpc_apicaddr) {
-		printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
-			" found in MP table, skipping!\n");
+	       m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+
+	if (bad_ioapic(m->mpc_apicaddr))
 		return;
-	}
+
 	mp_ioapics[nr_ioapics] = *m;
 	nr_ioapics++;
 }
 
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
+static void __init MP_intsrc_info(struct mpc_config_intsrc *m)
 {
-	mp_irqs [mp_irq_entries] = *m;
+	mp_irqs[mp_irq_entries] = *m;
 	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
 		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
-			m->mpc_irqtype, m->mpc_irqflag & 3,
-			(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
-			m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+		m->mpc_irqtype, m->mpc_irqflag & 3,
+		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+		m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
 	if (++mp_irq_entries == MAX_IRQ_SOURCES)
 		panic("Max # of irq sources exceeded!!\n");
 }
 
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
+#endif
+
+static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 {
 	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
 		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
-			m->mpc_irqtype, m->mpc_irqflag & 3,
-			(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
-			m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+		m->mpc_irqtype, m->mpc_irqflag & 3,
+		(m->mpc_irqflag >> 2) & 3, m->mpc_srcbusid,
+		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
 }
 
 #ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info (struct mpc_config_translation *m)
+static void __init MP_translation_info(struct mpc_config_translation *m)
 {
-	printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+	printk(KERN_INFO
+	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+	       m->trans_local);
 
-	if (mpc_record >= MAX_MPC_ENTRY) 
+	if (mpc_record >= MAX_MPC_ENTRY)
 		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
 	else
-		translation_table[mpc_record] = m; /* stash this for later */
+		translation_table[mpc_record] = m;	/* stash this for later */
 	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
 		node_set_online(m->trans_quad);
 }
@@ -312,118 +223,124 @@ static void __init MP_translation_info (struct mpc_config_translation *m)
  * Read/parse the MPC oem tables
  */
 
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
-	unsigned short oemsize)
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+				    unsigned short oemsize)
 {
-	int count = sizeof (*oemtable); /* the header size */
-	unsigned char *oemptr = ((unsigned char *)oemtable)+count;
-	
+	int count = sizeof(*oemtable);	/* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
 	mpc_record = 0;
-	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
-	if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
-	{
-		printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-			oemtable->oem_signature[0],
-			oemtable->oem_signature[1],
-			oemtable->oem_signature[2],
-			oemtable->oem_signature[3]);
+	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+	       oemtable);
+	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+		printk(KERN_WARNING
+		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+		       oemtable->oem_signature[0], oemtable->oem_signature[1],
+		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
 		return;
 	}
-	if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
-	{
+	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
 		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
 		return;
 	}
 	while (count < oemtable->oem_length) {
 		switch (*oemptr) {
-			case MP_TRANSLATION:
+		case MP_TRANSLATION:
 			{
-				struct mpc_config_translation *m=
-					(struct mpc_config_translation *)oemptr;
+				struct mpc_config_translation *m =
+				    (struct mpc_config_translation *)oemptr;
 				MP_translation_info(m);
 				oemptr += sizeof(*m);
 				count += sizeof(*m);
 				++mpc_record;
 				break;
 			}
-			default:
+		default:
 			{
-				printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
+				printk(KERN_WARNING
+				       "Unrecognised OEM table entry type! - %d\n",
+				       (int)*oemptr);
 				return;
 			}
 		}
-       }
+	}
 }
 
 static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
-		char *productid)
+				 char *productid)
 {
 	if (strncmp(oem, "IBM NUMA", 8))
 		printk("Warning!  May not be a NUMA-Q system!\n");
 	if (mpc->mpc_oemptr)
-		smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
-				mpc->mpc_oemsize);
+		smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
+				 mpc->mpc_oemsize);
 }
-#endif	/* CONFIG_X86_NUMAQ */
+#endif /* CONFIG_X86_NUMAQ */
 
 /*
  * Read/parse the MPC
  */
 
-static int __init smp_read_mpc(struct mp_config_table *mpc)
+static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 {
 	char str[16];
 	char oem[10];
-	int count=sizeof(*mpc);
-	unsigned char *mpt=((unsigned char *)mpc)+count;
+	int count = sizeof(*mpc);
+	unsigned char *mpt = ((unsigned char *)mpc) + count;
 
-	if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
-		printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
-			*(u32 *)mpc->mpc_signature);
+	if (memcmp(mpc->mpc_signature, MPC_SIGNATURE, 4)) {
+		printk(KERN_ERR "MPTABLE: bad signature [%c%c%c%c]!\n",
+		       mpc->mpc_signature[0], mpc->mpc_signature[1],
+		       mpc->mpc_signature[2], mpc->mpc_signature[3]);
 		return 0;
 	}
-	if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
-		printk(KERN_ERR "SMP mptable: checksum error!\n");
+	if (mpf_checksum((unsigned char *)mpc, mpc->mpc_length)) {
+		printk(KERN_ERR "MPTABLE: checksum error!\n");
 		return 0;
 	}
-	if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
-		printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
-			mpc->mpc_spec);
+	if (mpc->mpc_spec != 0x01 && mpc->mpc_spec != 0x04) {
+		printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
+		       mpc->mpc_spec);
 		return 0;
 	}
 	if (!mpc->mpc_lapic) {
-		printk(KERN_ERR "SMP mptable: null local APIC address!\n");
+		printk(KERN_ERR "MPTABLE: null local APIC address!\n");
 		return 0;
 	}
-	memcpy(oem,mpc->mpc_oem,8);
-	oem[8]=0;
-	printk(KERN_INFO "OEM ID: %s ",oem);
+	memcpy(oem, mpc->mpc_oem, 8);
+	oem[8] = 0;
+	printk(KERN_INFO "MPTABLE: OEM ID: %s ", oem);
 
-	memcpy(str,mpc->mpc_productid,12);
-	str[12]=0;
-	printk("Product ID: %s ",str);
+	memcpy(str, mpc->mpc_productid, 12);
+	str[12] = 0;
+	printk("Product ID: %s ", str);
 
+#ifdef CONFIG_X86_32
 	mps_oem_check(mpc, oem, str);
+#endif
+	printk(KERN_INFO "MPTABLE: Product ID: %s ", str);
 
-	printk("APIC at: 0x%X\n", mpc->mpc_lapic);
+	printk(KERN_INFO "MPTABLE: APIC at: 0x%X\n", mpc->mpc_lapic);
 
-	/*
-	 * Save the local APIC address (it might be non-default) -- but only
-	 * if we're not using ACPI.
-	 */
+	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
 		mp_lapic_addr = mpc->mpc_lapic;
 
+	if (early)
+		return 1;
+
 	/*
-	 *	Now process the configuration blocks.
+	 *      Now process the configuration blocks.
 	 */
+#ifdef CONFIG_X86_NUMAQ
 	mpc_record = 0;
+#endif
 	while (count < mpc->mpc_length) {
-		switch(*mpt) {
-			case MP_PROCESSOR:
+		switch (*mpt) {
+		case MP_PROCESSOR:
 			{
-				struct mpc_config_processor *m=
-					(struct mpc_config_processor *)mpt;
+				struct mpc_config_processor *m =
+				    (struct mpc_config_processor *)mpt;
 				/* ACPI may have already provided this data */
 				if (!acpi_lapic)
 					MP_processor_info(m);
@@ -431,57 +348,68 @@ static int __init smp_read_mpc(struct mp_config_table *mpc)
 				count += sizeof(*m);
 				break;
 			}
-			case MP_BUS:
+		case MP_BUS:
 			{
-				struct mpc_config_bus *m=
-					(struct mpc_config_bus *)mpt;
+				struct mpc_config_bus *m =
+				    (struct mpc_config_bus *)mpt;
 				MP_bus_info(m);
 				mpt += sizeof(*m);
 				count += sizeof(*m);
 				break;
 			}
-			case MP_IOAPIC:
+		case MP_IOAPIC:
 			{
-				struct mpc_config_ioapic *m=
-					(struct mpc_config_ioapic *)mpt;
+#ifdef CONFIG_X86_IO_APIC
+				struct mpc_config_ioapic *m =
+				    (struct mpc_config_ioapic *)mpt;
 				MP_ioapic_info(m);
-				mpt+=sizeof(*m);
-				count+=sizeof(*m);
+#endif
+				mpt += sizeof(struct mpc_config_ioapic);
+				count += sizeof(struct mpc_config_ioapic);
 				break;
 			}
-			case MP_INTSRC:
+		case MP_INTSRC:
 			{
-				struct mpc_config_intsrc *m=
-					(struct mpc_config_intsrc *)mpt;
+#ifdef CONFIG_X86_IO_APIC
+				struct mpc_config_intsrc *m =
+				    (struct mpc_config_intsrc *)mpt;
 
 				MP_intsrc_info(m);
-				mpt+=sizeof(*m);
-				count+=sizeof(*m);
+#endif
+				mpt += sizeof(struct mpc_config_intsrc);
+				count += sizeof(struct mpc_config_intsrc);
 				break;
 			}
-			case MP_LINTSRC:
+		case MP_LINTSRC:
 			{
-				struct mpc_config_lintsrc *m=
-					(struct mpc_config_lintsrc *)mpt;
+				struct mpc_config_lintsrc *m =
+				    (struct mpc_config_lintsrc *)mpt;
 				MP_lintsrc_info(m);
-				mpt+=sizeof(*m);
-				count+=sizeof(*m);
-				break;
-			}
-			default:
-			{
-				count = mpc->mpc_length;
+				mpt += sizeof(*m);
+				count += sizeof(*m);
 				break;
 			}
+		default:
+			/* wrong mptable */
+			printk(KERN_ERR "Your mptable is wrong, contact your HW vendor!\n");
+			printk(KERN_ERR "type %x\n", *mpt);
+			print_hex_dump(KERN_ERR, "  ", DUMP_PREFIX_ADDRESS, 16,
+					1, mpc, mpc->mpc_length, 1);
+			count = mpc->mpc_length;
+			break;
 		}
+#ifdef CONFIG_X86_NUMAQ
 		++mpc_record;
+#endif
 	}
 	setup_apic_routing();
 	if (!num_processors)
-		printk(KERN_ERR "SMP mptable: no processors registered!\n");
+		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;
 }
 
+#ifdef CONFIG_X86_IO_APIC
+
 static int __init ELCR_trigger(unsigned int irq)
 {
 	unsigned int port;
@@ -497,7 +425,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	int ELCR_fallback = 0;
 
 	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;			/* conforming */
+	intsrc.mpc_irqflag = 0;	/* conforming */
 	intsrc.mpc_srcbus = 0;
 	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
 
@@ -512,12 +440,16 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 	 *  If it does, we assume it's valid.
 	 */
 	if (mpc_default_type == 5) {
-		printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+		printk(KERN_INFO "ISA/PCI bus type with no IRQ information... "
+		       "falling back to ELCR\n");
 
-		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
-			printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
+		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
+		    ELCR_trigger(13))
+			printk(KERN_ERR "ELCR contains invalid data... "
+			       "not using ELCR\n");
 		else {
-			printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+			printk(KERN_INFO
+			       "Using ELCR to identify PCI interrupts\n");
 			ELCR_fallback = 1;
 		}
 	}
@@ -546,21 +478,25 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type)
 		}
 
 		intsrc.mpc_srcbusirq = i;
-		intsrc.mpc_dstirq = i ? i : 2;		/* IRQ0 to INTIN2 */
+		intsrc.mpc_dstirq = i ? i : 2;	/* IRQ0 to INTIN2 */
 		MP_intsrc_info(&intsrc);
 	}
 
 	intsrc.mpc_irqtype = mp_ExtINT;
 	intsrc.mpc_srcbusirq = 0;
-	intsrc.mpc_dstirq = 0;				/* 8259A to INTIN0 */
+	intsrc.mpc_dstirq = 0;	/* 8259A to INTIN0 */
 	MP_intsrc_info(&intsrc);
 }
 
+#endif
+
 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 {
 	struct mpc_config_processor processor;
 	struct mpc_config_bus bus;
+#ifdef CONFIG_X86_IO_APIC
 	struct mpc_config_ioapic ioapic;
+#endif
 	struct mpc_config_lintsrc lintsrc;
 	int linttypes[2] = { mp_ExtINT, mp_NMI };
 	int i;
@@ -578,8 +514,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
 	processor.mpc_cpuflag = CPU_ENABLED;
 	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
-				   (boot_cpu_data.x86_model << 4) |
-				   boot_cpu_data.x86_mask;
+	    (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
 	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
 	processor.mpc_reserved[0] = 0;
 	processor.mpc_reserved[1] = 0;
@@ -591,23 +526,22 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	bus.mpc_type = MP_BUS;
 	bus.mpc_busid = 0;
 	switch (mpc_default_type) {
-		default:
-			printk("???\n");
-			printk(KERN_ERR "Unknown standard configuration %d\n",
-				mpc_default_type);
-			/* fall through */
-		case 1:
-		case 5:
-			memcpy(bus.mpc_bustype, "ISA   ", 6);
-			break;
-		case 2:
-		case 6:
-		case 3:
-			memcpy(bus.mpc_bustype, "EISA  ", 6);
-			break;
-		case 4:
-		case 7:
-			memcpy(bus.mpc_bustype, "MCA   ", 6);
+	default:
+		printk(KERN_ERR "???\nUnknown standard configuration %d\n",
+		       mpc_default_type);
+		/* fall through */
+	case 1:
+	case 5:
+		memcpy(bus.mpc_bustype, "ISA   ", 6);
+		break;
+	case 2:
+	case 6:
+	case 3:
+		memcpy(bus.mpc_bustype, "EISA  ", 6);
+		break;
+	case 4:
+	case 7:
+		memcpy(bus.mpc_bustype, "MCA   ", 6);
 	}
 	MP_bus_info(&bus);
 	if (mpc_default_type > 4) {
@@ -616,6 +550,7 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 		MP_bus_info(&bus);
 	}
 
+#ifdef CONFIG_X86_IO_APIC
 	ioapic.mpc_type = MP_IOAPIC;
 	ioapic.mpc_apicid = 2;
 	ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
@@ -627,9 +562,9 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
 	 */
 	construct_default_ioirq_mptable(mpc_default_type);
-
+#endif
 	lintsrc.mpc_type = MP_LINTSRC;
-	lintsrc.mpc_irqflag = 0;		/* conforming */
+	lintsrc.mpc_irqflag = 0;	/* conforming */
 	lintsrc.mpc_srcbusid = 0;
 	lintsrc.mpc_srcbusirq = 0;
 	lintsrc.mpc_destapic = MP_APIC_ALL;
@@ -645,36 +580,49 @@ static struct intel_mp_floating *mpf_found;
 /*
  * Scan the memory blocks for an SMP configuration block.
  */
-void __init get_smp_config (void)
+static void __init __get_smp_config(unsigned early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
+	if (acpi_lapic && early)
+		return;
 	/*
-	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
+	 * ACPI supports both logical (e.g. Hyper-Threading) and physical
 	 * processors, where MPS only supports physical.
 	 */
 	if (acpi_lapic && acpi_ioapic) {
-		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
+		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration "
+		       "information\n");
 		return;
-	}
-	else if (acpi_lapic)
-		printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
-
-	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
-	if (mpf->mpf_feature2 & (1<<7)) {
+	} else if (acpi_lapic)
+		printk(KERN_INFO "Using ACPI for processor (LAPIC) "
+		       "configuration information\n");
+
+	printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n",
+	       mpf->mpf_specification);
+#ifdef CONFIG_X86_32
+	if (mpf->mpf_feature2 & (1 << 7)) {
 		printk(KERN_INFO "    IMCR and PIC compatibility mode.\n");
 		pic_mode = 1;
 	} else {
 		printk(KERN_INFO "    Virtual Wire compatibility mode.\n");
 		pic_mode = 0;
 	}
-
+#endif
 	/*
 	 * Now see if we need to read further.
 	 */
 	if (mpf->mpf_feature1 != 0) {
+		if (early) {
+			/*
+			 * local APIC has default address
+			 */
+			mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+			return;
+		}
 
-		printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+		printk(KERN_INFO "Default MP configuration #%d\n",
+		       mpf->mpf_feature1);
 		construct_default_ISA_mptable(mpf->mpf_feature1);
 
 	} else if (mpf->mpf_physptr) {
@@ -683,12 +631,18 @@ void __init get_smp_config (void)
 		 * Read the physical hardware table.  Anything here will
 		 * override the defaults.
 		 */
-		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
+		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) {
 			smp_found_config = 0;
-			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
-			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
+			printk(KERN_ERR
+			       "BIOS bug, MP table errors detected!...\n");
+			printk(KERN_ERR "... disabling SMP support. "
+			       "(tell your hw vendor)\n");
 			return;
 		}
+
+		if (early)
+			return;
+#ifdef CONFIG_X86_IO_APIC
 		/*
 		 * If there are no explicit MP IRQ entries, then we are
 		 * broken.  We set up most of the low 16 IO-APIC pins to
@@ -697,7 +651,9 @@ void __init get_smp_config (void)
 		if (!mp_irq_entries) {
 			struct mpc_config_bus bus;
 
-			printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+			printk(KERN_ERR "BIOS bug, no explicit IRQ entries, "
+			       "using default mptable. "
+			       "(tell your hw vendor)\n");
 
 			bus.mpc_type = MP_BUS;
 			bus.mpc_busid = 0;
@@ -706,36 +662,51 @@ void __init get_smp_config (void)
 
 			construct_default_ioirq_mptable(0);
 		}
-
+#endif
 	} else
 		BUG();
 
-	printk(KERN_INFO "Processors: %d\n", num_processors);
+	if (!early)
+		printk(KERN_INFO "Processors: %d\n", num_processors);
 	/*
 	 * Only use the first configuration found.
 	 */
 }
 
-static int __init smp_scan_config (unsigned long base, unsigned long length)
+void __init early_get_smp_config(void)
+{
+	__get_smp_config(1);
+}
+
+void __init get_smp_config(void)
 {
-	unsigned long *bp = phys_to_virt(base);
+	__get_smp_config(0);
+}
+
+static int __init smp_scan_config(unsigned long base, unsigned long length,
+				  unsigned reserve)
+{
+	extern void __bad_mpf_size(void);
+	unsigned int *bp = phys_to_virt(base);
 	struct intel_mp_floating *mpf;
 
-	printk(KERN_INFO "Scan SMP from %p for %ld bytes.\n", bp,length);
+	Dprintk("Scan SMP from %p for %ld bytes.\n", bp, length);
 	if (sizeof(*mpf) != 16)
-		printk("Error: MPF size\n");
+		__bad_mpf_size();
 
 	while (length > 0) {
 		mpf = (struct intel_mp_floating *)bp;
 		if ((*bp == SMP_MAGIC_IDENT) &&
-			(mpf->mpf_length == 1) &&
-			!mpf_checksum((unsigned char *)bp, 16) &&
-			((mpf->mpf_specification == 1)
-				|| (mpf->mpf_specification == 4)) ) {
+		    (mpf->mpf_length == 1) &&
+		    !mpf_checksum((unsigned char *)bp, 16) &&
+		    ((mpf->mpf_specification == 1)
+		     || (mpf->mpf_specification == 4))) {
 
 			smp_found_config = 1;
+			mpf_found = mpf;
+#ifdef CONFIG_X86_32
 			printk(KERN_INFO "found SMP MP-table at [%p] %08lx\n",
-				mpf, virt_to_phys(mpf));
+			       mpf, virt_to_phys(mpf));
 			reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE,
 					BOOTMEM_DEFAULT);
 			if (mpf->mpf_physptr) {
@@ -756,8 +727,16 @@ static int __init smp_scan_config (unsigned long base, unsigned long length)
 						BOOTMEM_DEFAULT);
 			}
 
-			mpf_found = mpf;
-			return 1;
+#else
+			if (!reserve)
+				return 1;
+
+			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
+			if (mpf->mpf_physptr)
+				reserve_bootmem_generic(mpf->mpf_physptr,
+							PAGE_SIZE);
+#endif
+		return 1;
 		}
 		bp += 4;
 		length -= 16;
@@ -765,7 +744,7 @@ static int __init smp_scan_config (unsigned long base, unsigned long length)
 	return 0;
 }
 
-void __init find_smp_config (void)
+static void __init __find_smp_config(unsigned reserve)
 {
 	unsigned int address;
 
@@ -777,9 +756,9 @@ void __init find_smp_config (void)
 	 * 2) Scan the top 1K of base RAM
 	 * 3) Scan the 64K of bios
 	 */
-	if (smp_scan_config(0x0,0x400) ||
-		smp_scan_config(639*0x400,0x400) ||
-			smp_scan_config(0xF0000,0x10000))
+	if (smp_scan_config(0x0, 0x400, reserve) ||
+	    smp_scan_config(639 * 0x400, 0x400, reserve) ||
+	    smp_scan_config(0xF0000, 0x10000, reserve))
 		return;
 	/*
 	 * If it is an SMP machine we should know now, unless the
@@ -800,144 +779,113 @@ void __init find_smp_config (void)
 
 	address = get_bios_ebda();
 	if (address)
-		smp_scan_config(address, 0x400);
+		smp_scan_config(address, 0x400, reserve);
 }
 
-int es7000_plat;
-
-/* --------------------------------------------------------------------------
-                            ACPI-based MP Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-void __init mp_register_lapic_address(u64 address)
+void __init early_find_smp_config(void)
 {
-	mp_lapic_addr = (unsigned long) address;
-
-	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-
-	if (boot_cpu_physical_apicid == -1U)
-		boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-
-	Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+	__find_smp_config(0);
 }
 
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
+void __init find_smp_config(void)
 {
-	struct mpc_config_processor processor;
-	int boot_cpu = 0;
-	
-	if (MAX_APICS - id <= 0) {
-		printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
-			id, MAX_APICS);
-		return;
-	}
-
-	if (id == boot_cpu_physical_apicid)
-		boot_cpu = 1;
+	__find_smp_config(1);
+}
 
-	processor.mpc_type = MP_PROCESSOR;
-	processor.mpc_apicid = id;
-	processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
-	processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
-	processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
-	processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) | 
-		(boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
-	processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
+/* --------------------------------------------------------------------------
+                            ACPI-based MP Configuration
+   -------------------------------------------------------------------------- */
 
-	MP_processor_info(&processor);
-}
+#ifdef CONFIG_ACPI
 
 #ifdef	CONFIG_X86_IO_APIC
 
 #define MP_ISA_BUS		0
 #define MP_MAX_IOAPIC_PIN	127
 
-static struct mp_ioapic_routing {
-	int			apic_id;
-	int			gsi_base;
-	int			gsi_end;
-	u32			pin_programmed[4];
-} mp_ioapic_routing[MAX_IO_APICS];
+extern struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
 
-static int mp_find_ioapic (int gsi)
+static int mp_find_ioapic(int gsi)
 {
 	int i = 0;
 
 	/* Find the IOAPIC that manages this GSI. */
 	for (i = 0; i < nr_ioapics; i++) {
 		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-			&& (gsi <= mp_ioapic_routing[i].gsi_end))
+		    && (gsi <= mp_ioapic_routing[i].gsi_end))
 			return i;
 	}
 
 	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-
 	return -1;
 }
 
-void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
+static u8 uniq_ioapic_id(u8 id)
+{
+#ifdef CONFIG_X86_32
+	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+		return io_apic_get_unique_id(nr_ioapics, id);
+	else
+		return id;
+#else
+	int i;
+	DECLARE_BITMAP(used, 256);
+	bitmap_zero(used, 256);
+	for (i = 0; i < nr_ioapics; i++) {
+		struct mpc_config_ioapic *ia = &mp_ioapics[i];
+		__set_bit(ia->mpc_apicid, used);
+	}
+	if (!test_bit(id, used))
+		return id;
+	return find_first_zero_bit(used, 256);
+#endif
+}
+
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
 {
 	int idx = 0;
-	int tmpid;
 
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-			"(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-			" found in MADT table, skipping!\n");
+	if (bad_ioapic(address))
 		return;
-	}
 
-	idx = nr_ioapics++;
+	idx = nr_ioapics;
 
 	mp_ioapics[idx].mpc_type = MP_IOAPIC;
 	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
 	mp_ioapics[idx].mpc_apicaddr = address;
 
 	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
-		&& !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		tmpid = io_apic_get_unique_id(idx, id);
-	else
-		tmpid = id;
-	if (tmpid == -1) {
-		nr_ioapics--;
-		return;
-	}
-	mp_ioapics[idx].mpc_apicid = tmpid;
+	mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
+#ifdef CONFIG_X86_32
 	mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-	
-	/* 
+#else
+	mp_ioapics[idx].mpc_apicver = 0;
+#endif
+	/*
 	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
 	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
 	 */
 	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
 	mp_ioapic_routing[idx].gsi_base = gsi_base;
 	mp_ioapic_routing[idx].gsi_end = gsi_base +
-		io_apic_get_redir_entries(idx);
+	    io_apic_get_redir_entries(idx);
 
-	printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
+	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
 	       "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
 	       mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
-	       mp_ioapic_routing[idx].gsi_base,
-	       mp_ioapic_routing[idx].gsi_end);
+	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
+
+	nr_ioapics++;
 }
 
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 {
 	struct mpc_config_intsrc intsrc;
-	int			ioapic = -1;
-	int			pin = -1;
+	int ioapic = -1;
+	int pin = -1;
 
-	/* 
+	/*
 	 * Convert 'gsi' to 'ioapic.pin'.
 	 */
 	ioapic = mp_find_ioapic(gsi);
@@ -947,7 +895,7 @@ mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 
 	/*
 	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE 
+	 *      erroneously sets the trigger to level, resulting in a HUGE
 	 *      increase of timer interrupts!
 	 */
 	if ((bus_irq == 0) && (trigger == 3))
@@ -957,13 +905,13 @@ mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 	intsrc.mpc_irqtype = mp_INT;
 	intsrc.mpc_irqflag = (trigger << 2) | polarity;
 	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_srcbusirq = bus_irq;				       /* IRQ */
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	   /* APIC ID */
-	intsrc.mpc_dstirq = pin;				    /* INTIN# */
+	intsrc.mpc_srcbusirq = bus_irq;	/* IRQ */
+	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	/* APIC ID */
+	intsrc.mpc_dstirq = pin;	/* INTIN# */
 
 	Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
-		intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
-		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
+		intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
 		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
 
 	mp_irqs[mp_irq_entries] = intsrc;
@@ -971,16 +919,21 @@ mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
 		panic("Max # of irq sources exceeded!\n");
 }
 
-void __init mp_config_acpi_legacy_irqs (void)
+int es7000_plat;
+
+void __init mp_config_acpi_legacy_irqs(void)
 {
 	struct mpc_config_intsrc intsrc;
 	int i = 0;
 	int ioapic = -1;
 
-	/* 
+#if defined (CONFIG_MCA) || defined (CONFIG_EISA)
+	/*
 	 * Fabricate the legacy ISA bus (bus #31).
 	 */
 	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+#endif
+	set_bit(MP_ISA_BUS, mp_bus_not_pci);
 	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
 
 	/*
@@ -989,19 +942,20 @@ void __init mp_config_acpi_legacy_irqs (void)
 	if (es7000_plat == 1)
 		return;
 
-	/* 
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15). 
+	/*
+	 * Locate the IOAPIC that manages the ISA IRQs (0-15).
 	 */
 	ioapic = mp_find_ioapic(0);
 	if (ioapic < 0)
 		return;
 
 	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;					/* Conforming */
+	intsrc.mpc_irqflag = 0;	/* Conforming */
 	intsrc.mpc_srcbus = MP_ISA_BUS;
+#ifdef CONFIG_X86_IO_APIC
 	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
-	/* 
+#endif
+	/*
 	 * Use the default configuration for the IRQs 0-15.  Unless
 	 * overridden by (MADT) interrupt source override entries.
 	 */
@@ -1012,28 +966,29 @@ void __init mp_config_acpi_legacy_irqs (void)
 			struct mpc_config_intsrc *irq = mp_irqs + idx;
 
 			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
+			if (irq->mpc_srcbus == MP_ISA_BUS
+			    && irq->mpc_srcbusirq == i)
 				break;
 
 			/* Do we already have a mapping for this IOAPIC pin */
 			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
-				(irq->mpc_dstirq == i))
+			    (irq->mpc_dstirq == i))
 				break;
 		}
 
 		if (idx != mp_irq_entries) {
 			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
-			continue;			/* IRQ already used */
+			continue;	/* IRQ already used */
 		}
 
 		intsrc.mpc_irqtype = mp_INT;
-		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */
+		intsrc.mpc_srcbusirq = i;	/* Identity mapped */
 		intsrc.mpc_dstirq = i;
 
 		Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
-			"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
-			(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
-			intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, 
+			"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+			(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+			intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
 			intsrc.mpc_dstirq);
 
 		mp_irqs[mp_irq_entries] = intsrc;
@@ -1042,21 +997,27 @@ void __init mp_config_acpi_legacy_irqs (void)
 	}
 }
 
-#define MAX_GSI_NUM	4096
-#define IRQ_COMPRESSION_START	64
-
 int mp_register_gsi(u32 gsi, int triggering, int polarity)
 {
 	int ioapic = -1;
 	int ioapic_pin = 0;
 	int idx, bit = 0;
+#ifdef CONFIG_X86_32
+#define MAX_GSI_NUM	4096
+#define IRQ_COMPRESSION_START	64
+
 	static int pci_irq = IRQ_COMPRESSION_START;
 	/*
 	 * Mapping between Global System Interrupts, which
 	 * represent all possible interrupts, and IRQs
 	 * assigned to actual devices.
 	 */
-	static int		gsi_to_irq[MAX_GSI_NUM];
+	static int gsi_to_irq[MAX_GSI_NUM];
+#else
+
+	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
+		return gsi;
+#endif
 
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_gbl_FADT.sci_interrupt == gsi)
@@ -1070,11 +1031,13 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 
 	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
 
+#ifdef CONFIG_X86_32
 	if (ioapic_renumber_irq)
 		gsi = ioapic_renumber_irq(ioapic, gsi);
+#endif
 
-	/* 
-	 * Avoid pin reprogramming.  PRTs typically include entries  
+	/*
+	 * Avoid pin reprogramming.  PRTs typically include entries
 	 * with redundant pin->gsi mappings (but unique PCI devices);
 	 * we only program the IOAPIC on the first.
 	 */
@@ -1082,23 +1045,27 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 	idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
 	if (idx > 3) {
 		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-			"%d-%d\n", mp_ioapic_routing[ioapic].apic_id, 
-			ioapic_pin);
+		       "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+		       ioapic_pin);
 		return gsi;
 	}
-	if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+	if ((1 << bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
 		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
 			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+#ifdef CONFIG_X86_32
 		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
+#else
+		return gsi;
+#endif
 	}
 
-	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-
+	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1 << bit);
+#ifdef CONFIG_X86_32
 	/*
 	 * For GSI >= 64, use IRQ compression
 	 */
 	if ((gsi >= IRQ_COMPRESSION_START)
-		&& (triggering == ACPI_LEVEL_SENSITIVE)) {
+	    && (triggering == ACPI_LEVEL_SENSITIVE)) {
 		/*
 		 * For PCI devices assign IRQs in order, avoiding gaps
 		 * due to unused I/O APIC pins.
@@ -1115,8 +1082,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 			 * So test for this condition, and if necessary, avoid
 			 * the pin collision.
 			 */
-			if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
-				gsi = pci_irq++;
+			gsi = pci_irq++;
 			/*
 			 * Don't assign IRQ used by ACPI SCI
 			 */
@@ -1128,10 +1094,10 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 			return gsi;
 		}
 	}
-
+#endif
 	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		    triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		    polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+				triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+				polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
 	return gsi;
 }
 
diff --git a/arch/x86/kernel/mpparse_64.c b/arch/x86/kernel/mpparse_64.c
deleted file mode 100644
index 72ab1403fed7..000000000000
--- a/arch/x86/kernel/mpparse_64.c
+++ /dev/null
@@ -1,867 +0,0 @@
-/*
- *	Intel Multiprocessor Specification 1.1 and 1.4
- *	compliant MP-table parsing routines.
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	Fixes
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *		Alan Cox	:	Added EBDA scanning
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Maciej W. Rozycki:	Bits for default MP configurations
- *		Paul Diefenbaugh:	Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/acpi.h>
-#include <linux/module.h>
-
-#include <asm/smp.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/pgalloc.h>
-#include <asm/io_apic.h>
-#include <asm/proto.h>
-#include <asm/acpi.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES);
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-
-static int mp_current_pci_id = 0;
-/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* MP IRQ source entries */
-int mp_irq_entries;
-
-int nr_ioapics;
-unsigned long mp_lapic_addr = 0;
-
-
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_id = -1U;
-EXPORT_SYMBOL(boot_cpu_id);
-
-/* Internal processor count */
-unsigned int num_processors;
-
-unsigned disabled_cpus __cpuinitdata;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
-
-u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
-				= { [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_bios_cpu_apicid_early_ptr;
-DEFINE_PER_CPU(u16, x86_bios_cpu_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_bios_cpu_apicid);
-
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
-	int sum = 0;
-
-	while (len--)
-		sum += *mp++;
-
-	return sum & 0xFF;
-}
-
-static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
-{
-	int cpu;
-	cpumask_t tmp_map;
-	char *bootup_cpu = "";
-
-	if (!(m->mpc_cpuflag & CPU_ENABLED)) {
-		disabled_cpus++;
-		return;
-	}
-	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
-		bootup_cpu = " (Bootup-CPU)";
-		boot_cpu_id = m->mpc_apicid;
-	}
-
-	printk(KERN_INFO "Processor #%d%s\n", m->mpc_apicid, bootup_cpu);
-
-	if (num_processors >= NR_CPUS) {
-		printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
-			" Processor ignored.\n", NR_CPUS);
-		return;
-	}
-
-	num_processors++;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-
-	physid_set(m->mpc_apicid, phys_cpu_present_map);
- 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- 		/*
-		 * x86_bios_cpu_apicid is required to have processors listed
- 		 * in same order as logical cpu numbers. Hence the first
- 		 * entry is BSP, and so on.
- 		 */
-		cpu = 0;
- 	}
-	/* are we being called early in kernel startup? */
-	if (x86_cpu_to_apicid_early_ptr) {
-		u16 *cpu_to_apicid = x86_cpu_to_apicid_early_ptr;
-		u16 *bios_cpu_apicid = x86_bios_cpu_apicid_early_ptr;
-
-		cpu_to_apicid[cpu] = m->mpc_apicid;
-		bios_cpu_apicid[cpu] = m->mpc_apicid;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = m->mpc_apicid;
-		per_cpu(x86_bios_cpu_apicid, cpu) = m->mpc_apicid;
-	}
-
-	cpu_set(cpu, cpu_possible_map);
-	cpu_set(cpu, cpu_present_map);
-}
-
-static void __init MP_bus_info (struct mpc_config_bus *m)
-{
-	char str[7];
-
-	memcpy(str, m->mpc_bustype, 6);
-	str[6] = 0;
-	Dprintk("Bus #%d is %s\n", m->mpc_busid, str);
-
-	if (strncmp(str, "ISA", 3) == 0) {
-		set_bit(m->mpc_busid, mp_bus_not_pci);
-	} else if (strncmp(str, "PCI", 3) == 0) {
-		clear_bit(m->mpc_busid, mp_bus_not_pci);
-		mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
-		mp_current_pci_id++;
-	} else {
-		printk(KERN_ERR "Unknown bustype %s\n", str);
-	}
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-			"(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-			" found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
-{
-	if (!(m->mpc_flags & MPC_APIC_USABLE))
-		return;
-
-	printk("I/O APIC #%d at 0x%X.\n",
-		m->mpc_apicid, m->mpc_apicaddr);
-
-	if (bad_ioapic(m->mpc_apicaddr))
-		return;
-
-	mp_ioapics[nr_ioapics] = *m;
-	nr_ioapics++;
-}
-
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
-{
-	mp_irqs [mp_irq_entries] = *m;
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC INT %02x\n",
-			m->mpc_irqtype, m->mpc_irqflag & 3,
-			(m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
-			m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
-	if (++mp_irq_entries >= MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
-{
-	Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
-		" IRQ %02x, APIC ID %x, APIC LINT %02x\n",
-			m->mpc_irqtype, m->mpc_irqflag & 3,
-			(m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
-			m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-/*
- * Read/parse the MPC
- */
-
-static int __init smp_read_mpc(struct mp_config_table *mpc)
-{
-	char str[16];
-	int count=sizeof(*mpc);
-	unsigned char *mpt=((unsigned char *)mpc)+count;
-
-	if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
-		printk("MPTABLE: bad signature [%c%c%c%c]!\n",
-			mpc->mpc_signature[0],
-			mpc->mpc_signature[1],
-			mpc->mpc_signature[2],
-			mpc->mpc_signature[3]);
-		return 0;
-	}
-	if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
-		printk("MPTABLE: checksum error!\n");
-		return 0;
-	}
-	if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
-		printk(KERN_ERR "MPTABLE: bad table version (%d)!!\n",
-			mpc->mpc_spec);
-		return 0;
-	}
-	if (!mpc->mpc_lapic) {
-		printk(KERN_ERR "MPTABLE: null local APIC address!\n");
-		return 0;
-	}
-	memcpy(str,mpc->mpc_oem,8);
-	str[8] = 0;
-	printk(KERN_INFO "MPTABLE: OEM ID: %s ",str);
-
-	memcpy(str,mpc->mpc_productid,12);
-	str[12] = 0;
-	printk("MPTABLE: Product ID: %s ",str);
-
-	printk("MPTABLE: APIC at: 0x%X\n",mpc->mpc_lapic);
-
-	/* save the local APIC address, it might be non-default */
-	if (!acpi_lapic)
-		mp_lapic_addr = mpc->mpc_lapic;
-
-	/*
-	 *	Now process the configuration blocks.
-	 */
-	while (count < mpc->mpc_length) {
-		switch(*mpt) {
-			case MP_PROCESSOR:
-			{
-				struct mpc_config_processor *m=
-					(struct mpc_config_processor *)mpt;
-				if (!acpi_lapic)
-					MP_processor_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_BUS:
-			{
-				struct mpc_config_bus *m=
-					(struct mpc_config_bus *)mpt;
-				MP_bus_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_IOAPIC:
-			{
-				struct mpc_config_ioapic *m=
-					(struct mpc_config_ioapic *)mpt;
-				MP_ioapic_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_INTSRC:
-			{
-				struct mpc_config_intsrc *m=
-					(struct mpc_config_intsrc *)mpt;
-
-				MP_intsrc_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-			case MP_LINTSRC:
-			{
-				struct mpc_config_lintsrc *m=
-					(struct mpc_config_lintsrc *)mpt;
-				MP_lintsrc_info(m);
-				mpt += sizeof(*m);
-				count += sizeof(*m);
-				break;
-			}
-		}
-	}
-	setup_apic_routing();
-	if (!num_processors)
-		printk(KERN_ERR "MPTABLE: no processors registered!\n");
-	return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
-	unsigned int port;
-
-	port = 0x4d0 + (irq >> 3);
-	return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
-	struct mpc_config_intsrc intsrc;
-	int i;
-	int ELCR_fallback = 0;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;			/* conforming */
-	intsrc.mpc_srcbus = 0;
-	intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
-	intsrc.mpc_irqtype = mp_INT;
-
-	/*
-	 *  If true, we have an ISA/PCI system with no IRQ entries
-	 *  in the MP table. To prevent the PCI interrupts from being set up
-	 *  incorrectly, we try to use the ELCR. The sanity check to see if
-	 *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
-	 *  never be level sensitive, so we simply see if the ELCR agrees.
-	 *  If it does, we assume it's valid.
-	 */
-	if (mpc_default_type == 5) {
-		printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
-
-		if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
-			printk(KERN_ERR "ELCR contains invalid data... not using ELCR\n");
-		else {
-			printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
-			ELCR_fallback = 1;
-		}
-	}
-
-	for (i = 0; i < 16; i++) {
-		switch (mpc_default_type) {
-		case 2:
-			if (i == 0 || i == 13)
-				continue;	/* IRQ0 & IRQ13 not connected */
-			/* fall through */
-		default:
-			if (i == 2)
-				continue;	/* IRQ2 is never connected */
-		}
-
-		if (ELCR_fallback) {
-			/*
-			 *  If the ELCR indicates a level-sensitive interrupt, we
-			 *  copy that information over to the MP table in the
-			 *  irqflag field (level sensitive, active high polarity).
-			 */
-			if (ELCR_trigger(i))
-				intsrc.mpc_irqflag = 13;
-			else
-				intsrc.mpc_irqflag = 0;
-		}
-
-		intsrc.mpc_srcbusirq = i;
-		intsrc.mpc_dstirq = i ? i : 2;		/* IRQ0 to INTIN2 */
-		MP_intsrc_info(&intsrc);
-	}
-
-	intsrc.mpc_irqtype = mp_ExtINT;
-	intsrc.mpc_srcbusirq = 0;
-	intsrc.mpc_dstirq = 0;				/* 8259A to INTIN0 */
-	MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
-	struct mpc_config_processor processor;
-	struct mpc_config_bus bus;
-	struct mpc_config_ioapic ioapic;
-	struct mpc_config_lintsrc lintsrc;
-	int linttypes[2] = { mp_ExtINT, mp_NMI };
-	int i;
-
-	/*
-	 * local APIC has default address
-	 */
-	mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
-	/*
-	 * 2 CPUs, numbered 0 & 1.
-	 */
-	processor.mpc_type = MP_PROCESSOR;
-	processor.mpc_apicver = 0;
-	processor.mpc_cpuflag = CPU_ENABLED;
-	processor.mpc_cpufeature = 0;
-	processor.mpc_featureflag = 0;
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-	for (i = 0; i < 2; i++) {
-		processor.mpc_apicid = i;
-		MP_processor_info(&processor);
-	}
-
-	bus.mpc_type = MP_BUS;
-	bus.mpc_busid = 0;
-	switch (mpc_default_type) {
-		default:
-			printk(KERN_ERR "???\nUnknown standard configuration %d\n",
-				mpc_default_type);
-			/* fall through */
-		case 1:
-		case 5:
-			memcpy(bus.mpc_bustype, "ISA   ", 6);
-			break;
-	}
-	MP_bus_info(&bus);
-	if (mpc_default_type > 4) {
-		bus.mpc_busid = 1;
-		memcpy(bus.mpc_bustype, "PCI   ", 6);
-		MP_bus_info(&bus);
-	}
-
-	ioapic.mpc_type = MP_IOAPIC;
-	ioapic.mpc_apicid = 2;
-	ioapic.mpc_apicver = 0;
-	ioapic.mpc_flags = MPC_APIC_USABLE;
-	ioapic.mpc_apicaddr = 0xFEC00000;
-	MP_ioapic_info(&ioapic);
-
-	/*
-	 * We set up most of the low 16 IO-APIC pins according to MPS rules.
-	 */
-	construct_default_ioirq_mptable(mpc_default_type);
-
-	lintsrc.mpc_type = MP_LINTSRC;
-	lintsrc.mpc_irqflag = 0;		/* conforming */
-	lintsrc.mpc_srcbusid = 0;
-	lintsrc.mpc_srcbusirq = 0;
-	lintsrc.mpc_destapic = MP_APIC_ALL;
-	for (i = 0; i < 2; i++) {
-		lintsrc.mpc_irqtype = linttypes[i];
-		lintsrc.mpc_destapiclint = i;
-		MP_lintsrc_info(&lintsrc);
-	}
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-void __init get_smp_config (void)
-{
-	struct intel_mp_floating *mpf = mpf_found;
-
-	/*
- 	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
- 	 * processors, where MPS only supports physical.
- 	 */
- 	if (acpi_lapic && acpi_ioapic) {
- 		printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
- 		return;
-	}
- 	else if (acpi_lapic)
- 		printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
-
-	printk("Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
-
-	/*
-	 * Now see if we need to read further.
-	 */
-	if (mpf->mpf_feature1 != 0) {
-
-		printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
-		construct_default_ISA_mptable(mpf->mpf_feature1);
-
-	} else if (mpf->mpf_physptr) {
-
-		/*
-		 * Read the physical hardware table.  Anything here will
-		 * override the defaults.
-		 */
-		if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
-			smp_found_config = 0;
-			printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
-			printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
-			return;
-		}
-		/*
-		 * If there are no explicit MP IRQ entries, then we are
-		 * broken.  We set up most of the low 16 IO-APIC pins to
-		 * ISA defaults and hope it will work.
-		 */
-		if (!mp_irq_entries) {
-			struct mpc_config_bus bus;
-
-			printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
-
-			bus.mpc_type = MP_BUS;
-			bus.mpc_busid = 0;
-			memcpy(bus.mpc_bustype, "ISA   ", 6);
-			MP_bus_info(&bus);
-
-			construct_default_ioirq_mptable(0);
-		}
-
-	} else
-		BUG();
-
-	printk(KERN_INFO "Processors: %d\n", num_processors);
-	/*
-	 * Only use the first configuration found.
-	 */
-}
-
-static int __init smp_scan_config (unsigned long base, unsigned long length)
-{
-	extern void __bad_mpf_size(void); 
-	unsigned int *bp = phys_to_virt(base);
-	struct intel_mp_floating *mpf;
-
-	Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
-	if (sizeof(*mpf) != 16)
-		__bad_mpf_size();
-
-	while (length > 0) {
-		mpf = (struct intel_mp_floating *)bp;
-		if ((*bp == SMP_MAGIC_IDENT) &&
-			(mpf->mpf_length == 1) &&
-			!mpf_checksum((unsigned char *)bp, 16) &&
-			((mpf->mpf_specification == 1)
-				|| (mpf->mpf_specification == 4)) ) {
-
-			smp_found_config = 1;
-			reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE);
-			if (mpf->mpf_physptr)
-				reserve_bootmem_generic(mpf->mpf_physptr, PAGE_SIZE);
-			mpf_found = mpf;
-			return 1;
-		}
-		bp += 4;
-		length -= 16;
-	}
-	return 0;
-}
-
-void __init find_smp_config(void)
-{
-	unsigned int address;
-
-	/*
-	 * FIXME: Linux assumes you have 640K of base ram..
-	 * this continues the error...
-	 *
-	 * 1) Scan the bottom 1K for a signature
-	 * 2) Scan the top 1K of base RAM
-	 * 3) Scan the 64K of bios
-	 */
-	if (smp_scan_config(0x0,0x400) ||
-		smp_scan_config(639*0x400,0x400) ||
-			smp_scan_config(0xF0000,0x10000))
-		return;
-	/*
-	 * If it is an SMP machine we should know now.
-	 *
-	 * there is a real-mode segmented pointer pointing to the
-	 * 4K EBDA area at 0x40E, calculate and scan it here.
-	 *
-	 * NOTE! There are Linux loaders that will corrupt the EBDA
-	 * area, and as such this kind of SMP config may be less
-	 * trustworthy, simply because the SMP table may have been
-	 * stomped on during early boot. These loaders are buggy and
-	 * should be fixed.
-	 */
-
-	address = *(unsigned short *)phys_to_virt(0x40E);
-	address <<= 4;
-	if (smp_scan_config(address, 0x1000))
-		return;
-
-	/* If we have come this far, we did not find an MP table  */
-	 printk(KERN_INFO "No mptable found.\n");
-}
-
-/* --------------------------------------------------------------------------
-                            ACPI-based MP Configuration
-   -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-void __init mp_register_lapic_address(u64 address)
-{
-	mp_lapic_addr = (unsigned long) address;
-	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-	if (boot_cpu_id == -1U)
-		boot_cpu_id = GET_APIC_ID(apic_read(APIC_ID));
-}
-
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
-{
-	struct mpc_config_processor processor;
-	int			boot_cpu = 0;
-	
-	if (id == boot_cpu_id)
-		boot_cpu = 1;
-
-	processor.mpc_type = MP_PROCESSOR;
-	processor.mpc_apicid = id;
-	processor.mpc_apicver = 0;
-	processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
-	processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
-	processor.mpc_cpufeature = 0;
-	processor.mpc_featureflag = 0;
-	processor.mpc_reserved[0] = 0;
-	processor.mpc_reserved[1] = 0;
-
-	MP_processor_info(&processor);
-}
-
-#define MP_ISA_BUS		0
-#define MP_MAX_IOAPIC_PIN	127
-
-static struct mp_ioapic_routing {
-	int			apic_id;
-	int			gsi_start;
-	int			gsi_end;
-	u32			pin_programmed[4];
-} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_start)
-			&& (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-static u8 uniq_ioapic_id(u8 id)
-{
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_config_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->mpc_apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-}
-
-void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].mpc_type = MP_IOAPIC;
-	mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].mpc_apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].mpc_apicid = uniq_ioapic_id(id);
-	mp_ioapics[idx].mpc_apicver = 0;
-	
-	/* 
-	 * Build basic IRQ lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI IRQs).
-	 */
-	mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
-	mp_ioapic_routing[idx].gsi_start = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base + 
-		io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, address 0x%x, "
-		"GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid, 
-		mp_ioapics[idx].mpc_apicaddr,
-		mp_ioapic_routing[idx].gsi_start,
-		mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32	gsi)
-{
-	struct mpc_config_intsrc intsrc;
-	int			ioapic = -1;
-	int			pin = -1;
-
-	/* 
-	 * Convert 'gsi' to 'ioapic.pin'.
-	 */
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0)
-		return;
-	pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
-
-	/*
-	 * TBD: This check is for faulty timer entries, where the override
-	 *      erroneously sets the trigger to level, resulting in a HUGE 
-	 *      increase of timer interrupts!
-	 */
-	if ((bus_irq == 0) && (trigger == 3))
-		trigger = 1;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqtype = mp_INT;
-	intsrc.mpc_irqflag = (trigger << 2) | polarity;
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_srcbusirq = bus_irq;				       /* IRQ */
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;	   /* APIC ID */
-	intsrc.mpc_dstirq = pin;				    /* INTIN# */
-
-	Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n", 
-		intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
-		(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
-		intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
-	mp_irqs[mp_irq_entries] = intsrc;
-	if (++mp_irq_entries == MAX_IRQ_SOURCES)
-		panic("Max # of irq sources exceeded!\n");
-}
-
-void __init mp_config_acpi_legacy_irqs(void)
-{
-	struct mpc_config_intsrc intsrc;
-	int i = 0;
-	int ioapic = -1;
-
-	/* 
-	 * Fabricate the legacy ISA bus (bus #31).
-	 */
-	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-
-	/* 
-	 * Locate the IOAPIC that manages the ISA IRQs (0-15). 
-	 */
-	ioapic = mp_find_ioapic(0);
-	if (ioapic < 0)
-		return;
-
-	intsrc.mpc_type = MP_INTSRC;
-	intsrc.mpc_irqflag = 0;					/* Conforming */
-	intsrc.mpc_srcbus = MP_ISA_BUS;
-	intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
-	/* 
-	 * Use the default configuration for the IRQs 0-15.  Unless
-	 * overridden by (MADT) interrupt source override entries.
-	 */
-	for (i = 0; i < 16; i++) {
-		int idx;
-
-		for (idx = 0; idx < mp_irq_entries; idx++) {
-			struct mpc_config_intsrc *irq = mp_irqs + idx;
-
-			/* Do we already have a mapping for this ISA IRQ? */
-			if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
-				break;
-
-			/* Do we already have a mapping for this IOAPIC pin */
-			if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
-				(irq->mpc_dstirq == i))
-				break;
-		}
-
-		if (idx != mp_irq_entries) {
-			printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
-			continue;			/* IRQ already used */
-		}
-
-		intsrc.mpc_irqtype = mp_INT;
-		intsrc.mpc_srcbusirq = i;		   /* Identity mapped */
-		intsrc.mpc_dstirq = i;
-
-		Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
-			"%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3, 
-			(intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus, 
-			intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, 
-			intsrc.mpc_dstirq);
-
-		mp_irqs[mp_irq_entries] = intsrc;
-		if (++mp_irq_entries == MAX_IRQ_SOURCES)
-			panic("Max # of irq sources exceeded!\n");
-	}
-}
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
-	int ioapic = -1;
-	int ioapic_pin = 0;
-	int idx, bit = 0;
-
-	if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
-		return gsi;
-
-	/* Don't set up the ACPI SCI because it's already set up */
-	if (acpi_gbl_FADT.sci_interrupt == gsi)
-		return gsi;
-
-	ioapic = mp_find_ioapic(gsi);
-	if (ioapic < 0) {
-		printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
-		return gsi;
-	}
-
-	ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_start;
-
-	/* 
-	 * Avoid pin reprogramming.  PRTs typically include entries  
-	 * with redundant pin->gsi mappings (but unique PCI devices);
-	 * we only program the IOAPIC on the first.
-	 */
-	bit = ioapic_pin % 32;
-	idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
-	if (idx > 3) {
-		printk(KERN_ERR "Invalid reference to IOAPIC pin "
-			"%d-%d\n", mp_ioapic_routing[ioapic].apic_id, 
-			ioapic_pin);
-		return gsi;
-	}
-	if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-		return gsi;
-	}
-
-	mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-
-	io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
-		triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
-		polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
-	return gsi;
-}
-#endif /*CONFIG_ACPI*/
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index af51ea8400b2..1f3abe048e93 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -65,8 +65,8 @@ static loff_t msr_seek(struct file *file, loff_t offset, int orig)
 	return ret;
 }
 
-static ssize_t msr_read(struct file *file, char __user * buf,
-			size_t count, loff_t * ppos)
+static ssize_t msr_read(struct file *file, char __user *buf,
+			size_t count, loff_t *ppos)
 {
 	u32 __user *tmp = (u32 __user *) buf;
 	u32 data[2];
@@ -162,12 +162,10 @@ static int __cpuinit msr_class_cpu_callback(struct notifier_block *nfb,
 		err = msr_device_create(cpu);
 		break;
 	case CPU_UP_CANCELED:
+	case CPU_UP_CANCELED_FROZEN:
 	case CPU_DEAD:
 		msr_device_destroy(cpu);
 		break;
-	case CPU_UP_CANCELED_FROZEN:
-		destroy_suspended_device(msr_class, MKDEV(MSR_MAJOR, cpu));
-		break;
 	}
 	return err ? NOTIFY_BAD : NOTIFY_OK;
 }
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index 6a0aa7038685..11b14bbaa61e 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -22,9 +22,11 @@
 #include <linux/cpumask.h>
 #include <linux/kernel_stat.h>
 #include <linux/kdebug.h>
+#include <linux/slab.h>
 
 #include <asm/smp.h>
 #include <asm/nmi.h>
+#include <asm/timer.h>
 
 #include "mach_traps.h"
 
@@ -67,7 +69,7 @@ static __init void nmi_cpu_busy(void *data)
 }
 #endif
 
-static int __init check_nmi_watchdog(void)
+int __init check_nmi_watchdog(void)
 {
 	unsigned int *prev_nmi_count;
 	int cpu;
@@ -80,7 +82,7 @@ static int __init check_nmi_watchdog(void)
 
 	prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
 	if (!prev_nmi_count)
-		return -1;
+		goto error;
 
 	printk(KERN_INFO "Testing NMI watchdog ... ");
 
@@ -117,7 +119,7 @@ static int __init check_nmi_watchdog(void)
 	if (!atomic_read(&nmi_active)) {
 		kfree(prev_nmi_count);
 		atomic_set(&nmi_active, -1);
-		return -1;
+		goto error;
 	}
 	printk("OK.\n");
 
@@ -128,9 +130,11 @@ static int __init check_nmi_watchdog(void)
 
 	kfree(prev_nmi_count);
 	return 0;
+error:
+	timer_ack = !cpu_has_tsc;
+
+	return -1;
 }
-/* This needs to happen later in boot so counters are working */
-late_initcall(check_nmi_watchdog);
 
 static int __init setup_nmi_watchdog(char *str)
 {
@@ -317,7 +321,8 @@ EXPORT_SYMBOL(touch_nmi_watchdog);
 
 extern void die_nmi(struct pt_regs *, const char *msg);
 
-__kprobes int nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
+notrace __kprobes int
+nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 {
 
 	/*
diff --git a/arch/x86/kernel/nmi_64.c b/arch/x86/kernel/nmi_64.c
index 9a4fde74bee1..5a29ded994fa 100644
--- a/arch/x86/kernel/nmi_64.c
+++ b/arch/x86/kernel/nmi_64.c
@@ -26,6 +26,8 @@
 #include <asm/proto.h>
 #include <asm/mce.h>
 
+#include <mach_traps.h>
+
 int unknown_nmi_panic;
 int nmi_watchdog_enabled;
 int panic_on_unrecovered_nmi;
@@ -311,7 +313,8 @@ void touch_nmi_watchdog(void)
 }
 EXPORT_SYMBOL(touch_nmi_watchdog);
 
-int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
+notrace __kprobes int
+nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 {
 	int sum;
 	int touched = 0;
@@ -382,7 +385,8 @@ int __kprobes nmi_watchdog_tick(struct pt_regs * regs, unsigned reason)
 
 static unsigned ignore_nmis;
 
-asmlinkage __kprobes void do_nmi(struct pt_regs * regs, long error_code)
+asmlinkage notrace __kprobes void
+do_nmi(struct pt_regs *regs, long error_code)
 {
 	nmi_enter();
 	add_pda(__nmi_count,1);
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 075962cc75ab..3733412d1357 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -206,13 +206,6 @@ static struct resource reserve_ioports = {
 	.flags = IORESOURCE_IO | IORESOURCE_BUSY,
 };
 
-static struct resource reserve_iomem = {
-	.start = 0,
-	.end = -1,
-	.name = "paravirt-iomem",
-	.flags = IORESOURCE_MEM | IORESOURCE_BUSY,
-};
-
 /*
  * Reserve the whole legacy IO space to prevent any legacy drivers
  * from wasting time probing for their hardware.  This is a fairly
@@ -222,16 +215,7 @@ static struct resource reserve_iomem = {
  */
 int paravirt_disable_iospace(void)
 {
-	int ret;
-
-	ret = request_resource(&ioport_resource, &reserve_ioports);
-	if (ret == 0) {
-		ret = request_resource(&iomem_resource, &reserve_iomem);
-		if (ret)
-			release_resource(&reserve_ioports);
-	}
-
-	return ret;
+	return request_resource(&ioport_resource, &reserve_ioports);
 }
 
 static DEFINE_PER_CPU(enum paravirt_lazy_mode, paravirt_lazy_mode) = PARAVIRT_LAZY_NONE;
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 1b5464c2434f..2edee22e9c30 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -470,10 +470,11 @@ error:
 	return 0;
 }
 
-static dma_addr_t calgary_map_single(struct device *dev, void *vaddr,
+static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	size_t size, int direction)
 {
 	dma_addr_t dma_handle = bad_dma_address;
+	void *vaddr = phys_to_virt(paddr);
 	unsigned long uaddr;
 	unsigned int npages;
 	struct iommu_table *tbl = find_iommu_table(dev);
@@ -1232,8 +1233,7 @@ static int __init calgary_init(void)
 
 error:
 	do {
-		dev = pci_get_device_reverse(PCI_VENDOR_ID_IBM,
-					     PCI_ANY_ID, dev);
+		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
 		if (!dev)
 			break;
 		if (!is_cal_pci_dev(dev->device))
diff --git a/arch/x86/kernel/pci-dma_64.c b/arch/x86/kernel/pci-dma.c
index a82473d192a3..388b113a7d88 100644
--- a/arch/x86/kernel/pci-dma_64.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -1,66 +1,370 @@
-/*
- * Dynamic DMA mapping support.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/module.h>
+#include <linux/dma-mapping.h>
 #include <linux/dmar.h>
-#include <asm/io.h>
+#include <linux/bootmem.h>
+#include <linux/pci.h>
+
+#include <asm/proto.h>
+#include <asm/dma.h>
 #include <asm/gart.h>
 #include <asm/calgary.h>
 
-int iommu_merge __read_mostly = 0;
+int forbid_dac __read_mostly;
+EXPORT_SYMBOL(forbid_dac);
 
-dma_addr_t bad_dma_address __read_mostly;
-EXPORT_SYMBOL(bad_dma_address);
+const struct dma_mapping_ops *dma_ops;
+EXPORT_SYMBOL(dma_ops);
 
-/* This tells the BIO block layer to assume merging. Default to off
-   because we cannot guarantee merging later. */
-int iommu_bio_merge __read_mostly = 0;
-EXPORT_SYMBOL(iommu_bio_merge);
-
-static int iommu_sac_force __read_mostly = 0;
+int iommu_sac_force __read_mostly = 0;
 
-int no_iommu __read_mostly;
 #ifdef CONFIG_IOMMU_DEBUG
 int panic_on_overflow __read_mostly = 1;
 int force_iommu __read_mostly = 1;
 #else
 int panic_on_overflow __read_mostly = 0;
-int force_iommu __read_mostly= 0;
+int force_iommu __read_mostly = 0;
 #endif
 
+int iommu_merge __read_mostly = 0;
+
+int no_iommu __read_mostly;
 /* Set this to 1 if there is a HW IOMMU in the system */
 int iommu_detected __read_mostly = 0;
 
+/* This tells the BIO block layer to assume merging. Default to off
+   because we cannot guarantee merging later. */
+int iommu_bio_merge __read_mostly = 0;
+EXPORT_SYMBOL(iommu_bio_merge);
+
+dma_addr_t bad_dma_address __read_mostly = 0;
+EXPORT_SYMBOL(bad_dma_address);
+
 /* Dummy device used for NULL arguments (normally ISA). Better would
    be probably a smaller DMA mask, but this is bug-to-bug compatible
-   to i386. */
+   to older i386. */
 struct device fallback_dev = {
 	.bus_id = "fallback device",
 	.coherent_dma_mask = DMA_32BIT_MASK,
 	.dma_mask = &fallback_dev.coherent_dma_mask,
 };
 
+int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
+#ifdef CONFIG_X86_64
+static __initdata void *dma32_bootmem_ptr;
+static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
+
+static int __init parse_dma32_size_opt(char *p)
+{
+	if (!p)
+		return -EINVAL;
+	dma32_bootmem_size = memparse(p, &p);
+	return 0;
+}
+early_param("dma32_size", parse_dma32_size_opt);
+
+void __init dma32_reserve_bootmem(void)
+{
+	unsigned long size, align;
+	if (end_pfn <= MAX_DMA32_PFN)
+		return;
+
+	align = 64ULL<<20;
+	size = round_up(dma32_bootmem_size, align);
+	dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
+				 __pa(MAX_DMA_ADDRESS));
+	if (dma32_bootmem_ptr)
+		dma32_bootmem_size = size;
+	else
+		dma32_bootmem_size = 0;
+}
+static void __init dma32_free_bootmem(void)
+{
+	int node;
+
+	if (end_pfn <= MAX_DMA32_PFN)
+		return;
+
+	if (!dma32_bootmem_ptr)
+		return;
+
+	for_each_online_node(node)
+		free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr),
+				  dma32_bootmem_size);
+
+	dma32_bootmem_ptr = NULL;
+	dma32_bootmem_size = 0;
+}
+
+void __init pci_iommu_alloc(void)
+{
+	/* free the range so iommu could get some range less than 4G */
+	dma32_free_bootmem();
+	/*
+	 * The order of these functions is important for
+	 * fall-back/fail-over reasons
+	 */
+#ifdef CONFIG_GART_IOMMU
+	gart_iommu_hole_init();
+#endif
+
+#ifdef CONFIG_CALGARY_IOMMU
+	detect_calgary();
+#endif
+
+	detect_intel_iommu();
+
+#ifdef CONFIG_SWIOTLB
+	pci_swiotlb_init();
+#endif
+}
+#endif
+
+/*
+ * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
+ * documentation.
+ */
+static __init int iommu_setup(char *p)
+{
+	iommu_merge = 1;
+
+	if (!p)
+		return -EINVAL;
+
+	while (*p) {
+		if (!strncmp(p, "off", 3))
+			no_iommu = 1;
+		/* gart_parse_options has more force support */
+		if (!strncmp(p, "force", 5))
+			force_iommu = 1;
+		if (!strncmp(p, "noforce", 7)) {
+			iommu_merge = 0;
+			force_iommu = 0;
+		}
+
+		if (!strncmp(p, "biomerge", 8)) {
+			iommu_bio_merge = 4096;
+			iommu_merge = 1;
+			force_iommu = 1;
+		}
+		if (!strncmp(p, "panic", 5))
+			panic_on_overflow = 1;
+		if (!strncmp(p, "nopanic", 7))
+			panic_on_overflow = 0;
+		if (!strncmp(p, "merge", 5)) {
+			iommu_merge = 1;
+			force_iommu = 1;
+		}
+		if (!strncmp(p, "nomerge", 7))
+			iommu_merge = 0;
+		if (!strncmp(p, "forcesac", 8))
+			iommu_sac_force = 1;
+		if (!strncmp(p, "allowdac", 8))
+			forbid_dac = 0;
+		if (!strncmp(p, "nodac", 5))
+			forbid_dac = -1;
+		if (!strncmp(p, "usedac", 6)) {
+			forbid_dac = -1;
+			return 1;
+		}
+#ifdef CONFIG_SWIOTLB
+		if (!strncmp(p, "soft", 4))
+			swiotlb = 1;
+#endif
+
+#ifdef CONFIG_GART_IOMMU
+		gart_parse_options(p);
+#endif
+
+#ifdef CONFIG_CALGARY_IOMMU
+		if (!strncmp(p, "calgary", 7))
+			use_calgary = 1;
+#endif /* CONFIG_CALGARY_IOMMU */
+
+		p += strcspn(p, ",");
+		if (*p == ',')
+			++p;
+	}
+	return 0;
+}
+early_param("iommu", iommu_setup);
+
+#ifdef CONFIG_X86_32
+int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+				dma_addr_t device_addr, size_t size, int flags)
+{
+	void __iomem *mem_base = NULL;
+	int pages = size >> PAGE_SHIFT;
+	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
+
+	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
+		goto out;
+	if (!size)
+		goto out;
+	if (dev->dma_mem)
+		goto out;
+
+	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
+
+	mem_base = ioremap(bus_addr, size);
+	if (!mem_base)
+		goto out;
+
+	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
+	if (!dev->dma_mem)
+		goto out;
+	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
+	if (!dev->dma_mem->bitmap)
+		goto free1_out;
+
+	dev->dma_mem->virt_base = mem_base;
+	dev->dma_mem->device_base = device_addr;
+	dev->dma_mem->size = pages;
+	dev->dma_mem->flags = flags;
+
+	if (flags & DMA_MEMORY_MAP)
+		return DMA_MEMORY_MAP;
+
+	return DMA_MEMORY_IO;
+
+ free1_out:
+	kfree(dev->dma_mem);
+ out:
+	if (mem_base)
+		iounmap(mem_base);
+	return 0;
+}
+EXPORT_SYMBOL(dma_declare_coherent_memory);
+
+void dma_release_declared_memory(struct device *dev)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+
+	if (!mem)
+		return;
+	dev->dma_mem = NULL;
+	iounmap(mem->virt_base);
+	kfree(mem->bitmap);
+	kfree(mem);
+}
+EXPORT_SYMBOL(dma_release_declared_memory);
+
+void *dma_mark_declared_memory_occupied(struct device *dev,
+					dma_addr_t device_addr, size_t size)
+{
+	struct dma_coherent_mem *mem = dev->dma_mem;
+	int pos, err;
+	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
+
+	pages >>= PAGE_SHIFT;
+
+	if (!mem)
+		return ERR_PTR(-EINVAL);
+
+	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
+	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
+	if (err != 0)
+		return ERR_PTR(err);
+	return mem->virt_base + (pos << PAGE_SHIFT);
+}
+EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
+
+static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size,
+				       dma_addr_t *dma_handle, void **ret)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+	int order = get_order(size);
+
+	if (mem) {
+		int page = bitmap_find_free_region(mem->bitmap, mem->size,
+						     order);
+		if (page >= 0) {
+			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
+			*ret = mem->virt_base + (page << PAGE_SHIFT);
+			memset(*ret, 0, size);
+		}
+		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
+			*ret = NULL;
+	}
+	return (mem != NULL);
+}
+
+static int dma_release_coherent(struct device *dev, int order, void *vaddr)
+{
+	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
+
+	if (mem && vaddr >= mem->virt_base && vaddr <
+		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
+		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
+
+		bitmap_release_region(mem->bitmap, page, order);
+		return 1;
+	}
+	return 0;
+}
+#else
+#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0)
+#define dma_release_coherent(dev, order, vaddr) (0)
+#endif /* CONFIG_X86_32 */
+
+int dma_supported(struct device *dev, u64 mask)
+{
+#ifdef CONFIG_PCI
+	if (mask > 0xffffffff && forbid_dac > 0) {
+		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
+				 dev->bus_id);
+		return 0;
+	}
+#endif
+
+	if (dma_ops->dma_supported)
+		return dma_ops->dma_supported(dev, mask);
+
+	/* Copied from i386. Doesn't make much sense, because it will
+	   only work for pci_alloc_coherent.
+	   The caller just has to use GFP_DMA in this case. */
+	if (mask < DMA_24BIT_MASK)
+		return 0;
+
+	/* Tell the device to use SAC when IOMMU force is on.  This
+	   allows the driver to use cheaper accesses in some cases.
+
+	   Problem with this is that if we overflow the IOMMU area and
+	   return DAC as fallback address the device may not handle it
+	   correctly.
+
+	   As a special case some controllers have a 39bit address
+	   mode that is as efficient as 32bit (aic79xx). Don't force
+	   SAC for these.  Assume all masks <= 40 bits are of this
+	   type. Normally this doesn't make any difference, but gives
+	   more gentle handling of IOMMU overflow. */
+	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
+		printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
+				 dev->bus_id, mask);
+		return 0;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL(dma_supported);
+
 /* Allocate DMA memory on node near device */
-noinline static void *
+noinline struct page *
 dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
 {
-	struct page *page;
 	int node;
 
 	node = dev_to_node(dev);
-	if (node == -1)
-		node = numa_node_id();
 
-	if (node < first_node(node_online_map))
-		node = first_node(node_online_map);
-
-	page = alloc_pages_node(node, gfp, order);
-	return page ? page_address(page) : NULL;
+	return alloc_pages_node(node, gfp, order);
 }
 
 /*
@@ -70,9 +374,16 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		   gfp_t gfp)
 {
-	void *memory;
+	void *memory = NULL;
+	struct page *page;
 	unsigned long dma_mask = 0;
-	u64 bus;
+	dma_addr_t bus;
+
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
+
+	if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
+		return memory;
 
 	if (!dev)
 		dev = &fallback_dev;
@@ -87,26 +398,25 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* Don't invoke OOM killer */
 	gfp |= __GFP_NORETRY;
 
-	/* Kludge to make it bug-to-bug compatible with i386. i386
-	   uses the normal dma_mask for alloc_coherent. */
-	dma_mask &= *dev->dma_mask;
-
+#ifdef CONFIG_X86_64
 	/* Why <=? Even when the mask is smaller than 4GB it is often
 	   larger than 16MB and in this case we have a chance of
 	   finding fitting memory in the next higher zone first. If
 	   not retry with true GFP_DMA. -AK */
 	if (dma_mask <= DMA_32BIT_MASK)
 		gfp |= GFP_DMA32;
+#endif
 
  again:
-	memory = dma_alloc_pages(dev, gfp, get_order(size));
-	if (memory == NULL)
+	page = dma_alloc_pages(dev, gfp, get_order(size));
+	if (page == NULL)
 		return NULL;
 
 	{
 		int high, mmu;
-		bus = virt_to_bus(memory);
-	        high = (bus + size) >= dma_mask;
+		bus = page_to_phys(page);
+		memory = page_address(page);
+		high = (bus + size) >= dma_mask;
 		mmu = high;
 		if (force_iommu && !(gfp & GFP_DMA))
 			mmu = 1;
@@ -132,7 +442,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 
 		memset(memory, 0, size);
 		if (!mmu) {
-			*dma_handle = virt_to_bus(memory);
+			*dma_handle = bus;
 			return memory;
 		}
 	}
@@ -144,7 +454,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	}
 
 	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, memory,
+		*dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
 					      size,
 					      PCI_DMA_BIDIRECTIONAL);
 		if (*dma_handle != bad_dma_address)
@@ -152,7 +462,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	}
 
 	if (panic_on_overflow)
-		panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size);
+		panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",
+		      (unsigned long)size);
 	free_pages((unsigned long)memory, get_order(size));
 	return NULL;
 }
@@ -165,153 +476,16 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t bus)
 {
+	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
+	if (dma_release_coherent(dev, order, vaddr))
+		return;
 	if (dma_ops->unmap_single)
 		dma_ops->unmap_single(dev, bus, size, 0);
-	free_pages((unsigned long)vaddr, get_order(size));
+	free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-static int forbid_dac __read_mostly;
-
-int dma_supported(struct device *dev, u64 mask)
-{
-#ifdef CONFIG_PCI
-	if (mask > 0xffffffff && forbid_dac > 0) {
-
-
-
-		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n", dev->bus_id);
-		return 0;
-	}
-#endif
-
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
-
-	/* Copied from i386. Doesn't make much sense, because it will
-	   only work for pci_alloc_coherent.
-	   The caller just has to use GFP_DMA in this case. */
-        if (mask < DMA_24BIT_MASK)
-                return 0;
-
-	/* Tell the device to use SAC when IOMMU force is on.  This
-	   allows the driver to use cheaper accesses in some cases.
-
-	   Problem with this is that if we overflow the IOMMU area and
-	   return DAC as fallback address the device may not handle it
-	   correctly.
-
-	   As a special case some controllers have a 39bit address
-	   mode that is as efficient as 32bit (aic79xx). Don't force
-	   SAC for these.  Assume all masks <= 40 bits are of this
-	   type. Normally this doesn't make any difference, but gives
-	   more gentle handling of IOMMU overflow. */
-	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-		printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask);
-		return 0;
-	}
-
-	return 1;
-}
-EXPORT_SYMBOL(dma_supported);
-
-int dma_set_mask(struct device *dev, u64 mask)
-{
-	if (!dev->dma_mask || !dma_supported(dev, mask))
-		return -EIO;
-	*dev->dma_mask = mask;
-	return 0;
-}
-EXPORT_SYMBOL(dma_set_mask);
-
-/*
- * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
- * documentation.
- */
-static __init int iommu_setup(char *p)
-{
-	iommu_merge = 1;
-
-	if (!p)
-		return -EINVAL;
-
-	while (*p) {
-		if (!strncmp(p,"off",3))
-			no_iommu = 1;
-		/* gart_parse_options has more force support */
-		if (!strncmp(p,"force",5))
-			force_iommu = 1;
-		if (!strncmp(p,"noforce",7)) {
-			iommu_merge = 0;
-			force_iommu = 0;
-		}
-
-		if (!strncmp(p, "biomerge",8)) {
-			iommu_bio_merge = 4096;
-			iommu_merge = 1;
-			force_iommu = 1;
-		}
-		if (!strncmp(p, "panic",5))
-			panic_on_overflow = 1;
-		if (!strncmp(p, "nopanic",7))
-			panic_on_overflow = 0;
-		if (!strncmp(p, "merge",5)) {
-			iommu_merge = 1;
-			force_iommu = 1;
-		}
-		if (!strncmp(p, "nomerge",7))
-			iommu_merge = 0;
-		if (!strncmp(p, "forcesac",8))
-			iommu_sac_force = 1;
-		if (!strncmp(p, "allowdac", 8))
-			forbid_dac = 0;
-		if (!strncmp(p, "nodac", 5))
-			forbid_dac = -1;
-
-#ifdef CONFIG_SWIOTLB
-		if (!strncmp(p, "soft",4))
-			swiotlb = 1;
-#endif
-
-#ifdef CONFIG_GART_IOMMU
-		gart_parse_options(p);
-#endif
-
-#ifdef CONFIG_CALGARY_IOMMU
-		if (!strncmp(p, "calgary", 7))
-			use_calgary = 1;
-#endif /* CONFIG_CALGARY_IOMMU */
-
-		p += strcspn(p, ",");
-		if (*p == ',')
-			++p;
-	}
-	return 0;
-}
-early_param("iommu", iommu_setup);
-
-void __init pci_iommu_alloc(void)
-{
-	/*
-	 * The order of these functions is important for
-	 * fall-back/fail-over reasons
-	 */
-#ifdef CONFIG_GART_IOMMU
-	gart_iommu_hole_init();
-#endif
-
-#ifdef CONFIG_CALGARY_IOMMU
-	detect_calgary();
-#endif
-
-	detect_intel_iommu();
-
-#ifdef CONFIG_SWIOTLB
-	pci_swiotlb_init();
-#endif
-}
-
 static int __init pci_iommu_init(void)
 {
 #ifdef CONFIG_CALGARY_IOMMU
@@ -332,6 +506,8 @@ void pci_iommu_shutdown(void)
 {
 	gart_iommu_shutdown();
 }
+/* Must execute after PCI subsystem */
+fs_initcall(pci_iommu_init);
 
 #ifdef CONFIG_PCI
 /* Many VIA bridges seem to corrupt data for DAC. Disable it here */
@@ -339,11 +515,10 @@ void pci_iommu_shutdown(void)
 static __devinit void via_no_dac(struct pci_dev *dev)
 {
 	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n");
+		printk(KERN_INFO "PCI: VIA PCI bridge detected."
+				 "Disabling DAC.\n");
 		forbid_dac = 1;
 	}
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
 #endif
-/* Must execute after PCI subsystem */
-fs_initcall(pci_iommu_init);
diff --git a/arch/x86/kernel/pci-dma_32.c b/arch/x86/kernel/pci-dma_32.c
deleted file mode 100644
index 51330321a5d3..000000000000
--- a/arch/x86/kernel/pci-dma_32.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Dynamic DMA mapping support.
- *
- * On i386 there is no hardware dynamic DMA address translation,
- * so consistent alloc/free are merely page allocation/freeing.
- * The rest of the dynamic DMA mapping interface is implemented
- * in asm/pci.h.
- */
-
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/module.h>
-#include <asm/io.h>
-
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
-void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t gfp)
-{
-	void *ret;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-	int order = get_order(size);
-	/* ignore region specifiers */
-	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
-
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
-
-	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
-		gfp |= GFP_DMA;
-
-	ret = (void *)__get_free_pages(gfp, order);
-
-	if (ret != NULL) {
-		memset(ret, 0, size);
-		*dma_handle = virt_to_phys(ret);
-	}
-	return ret;
-}
-EXPORT_SYMBOL(dma_alloc_coherent);
-
-void dma_free_coherent(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-	int order = get_order(size);
-
-	WARN_ON(irqs_disabled());	/* for portability */
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else
-		free_pages((unsigned long)vaddr, order);
-}
-EXPORT_SYMBOL(dma_free_coherent);
-
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	
-	if(!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
-#ifdef CONFIG_PCI
-/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
-
-int forbid_dac;
-EXPORT_SYMBOL(forbid_dac);
-
-static __devinit void via_no_dac(struct pci_dev *dev)
-{
-	if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
-		printk(KERN_INFO "PCI: VIA PCI bridge detected. Disabling DAC.\n");
-		forbid_dac = 1;
-	}
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
-
-static int check_iommu(char *s)
-{
-	if (!strcmp(s, "usedac")) {
-		forbid_dac = -1;
-		return 1;
-	}
-	return 0;
-}
-__setup("iommu=", check_iommu);
-#endif
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index faf3229f8fb3..c07455d1695f 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -264,9 +264,9 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 }
 
 static dma_addr_t
-gart_map_simple(struct device *dev, char *buf, size_t size, int dir)
+gart_map_simple(struct device *dev, phys_addr_t paddr, size_t size, int dir)
 {
-	dma_addr_t map = dma_map_area(dev, virt_to_bus(buf), size, dir);
+	dma_addr_t map = dma_map_area(dev, paddr, size, dir);
 
 	flush_gart();
 
@@ -275,18 +275,17 @@ gart_map_simple(struct device *dev, char *buf, size_t size, int dir)
 
 /* Map a single area into the IOMMU */
 static dma_addr_t
-gart_map_single(struct device *dev, void *addr, size_t size, int dir)
+gart_map_single(struct device *dev, phys_addr_t paddr, size_t size, int dir)
 {
-	unsigned long phys_mem, bus;
+	unsigned long bus;
 
 	if (!dev)
 		dev = &fallback_dev;
 
-	phys_mem = virt_to_phys(addr);
-	if (!need_iommu(dev, phys_mem, size))
-		return phys_mem;
+	if (!need_iommu(dev, paddr, size))
+		return paddr;
 
-	bus = gart_map_simple(dev, addr, size, dir);
+	bus = gart_map_simple(dev, paddr, size, dir);
 
 	return bus;
 }
@@ -615,8 +614,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
  nommu:
 	/* Should not happen anymore */
-	printk(KERN_ERR "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
-	       KERN_ERR "PCI-DMA: 32bit PCI IO may malfunction.\n");
+	printk(KERN_WARNING "PCI-DMA: More than 4GB of RAM and no IOMMU\n"
+	       KERN_WARNING "falling back to iommu=soft.\n");
 	return -1;
 }
 
@@ -692,9 +691,9 @@ void __init gart_iommu_init(void)
 	    !gart_iommu_aperture ||
 	    (no_agp && init_k8_gatt(&info) < 0)) {
 		if (end_pfn > MAX_DMA32_PFN) {
-			printk(KERN_ERR "WARNING more than 4GB of memory "
-					"but GART IOMMU not available.\n"
-			       KERN_ERR "WARNING 32bit PCI may malfunction.\n");
+			printk(KERN_WARNING "More than 4GB of memory "
+			       	          "but GART IOMMU not available.\n"
+			       KERN_WARNING "falling back to iommu=soft.\n");
 		}
 		return;
 	}
diff --git a/arch/x86/kernel/pci-nommu_64.c b/arch/x86/kernel/pci-nommu.c
index ab08e1832228..aec43d56f49c 100644
--- a/arch/x86/kernel/pci-nommu_64.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -14,7 +14,7 @@
 static int
 check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 {
-        if (hwdev && bus + size > *hwdev->dma_mask) {
+	if (hwdev && bus + size > *hwdev->dma_mask) {
 		if (*hwdev->dma_mask >= DMA_32BIT_MASK)
 			printk(KERN_ERR
 			    "nommu_%s: overflow %Lx+%zu of device mask %Lx\n",
@@ -26,19 +26,17 @@ check_addr(char *name, struct device *hwdev, dma_addr_t bus, size_t size)
 }
 
 static dma_addr_t
-nommu_map_single(struct device *hwdev, void *ptr, size_t size,
+nommu_map_single(struct device *hwdev, phys_addr_t paddr, size_t size,
 	       int direction)
 {
-	dma_addr_t bus = virt_to_bus(ptr);
+	dma_addr_t bus = paddr;
+	WARN_ON(size == 0);
 	if (!check_addr("map_single", hwdev, bus, size))
 				return bad_dma_address;
+	flush_write_buffers();
 	return bus;
 }
 
-static void nommu_unmap_single(struct device *dev, dma_addr_t addr,size_t size,
-			int direction)
-{
-}
 
 /* Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scatter-gather version of the
@@ -61,30 +59,34 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	struct scatterlist *s;
 	int i;
 
+	WARN_ON(nents == 0 || sg[0].length == 0);
+
 	for_each_sg(sg, s, nents, i) {
 		BUG_ON(!sg_page(s));
-		s->dma_address = virt_to_bus(sg_virt(s));
+		s->dma_address = sg_phys(s);
 		if (!check_addr("map_sg", hwdev, s->dma_address, s->length))
 			return 0;
 		s->dma_length = s->length;
 	}
+	flush_write_buffers();
 	return nents;
 }
 
-/* Unmap a set of streaming mode DMA translations.
- * Again, cpu read rules concerning calls here are the same as for
- * pci_unmap_single() above.
- */
-static void nommu_unmap_sg(struct device *dev, struct scatterlist *sg,
-		  int nents, int dir)
+/* Make sure we keep the same behaviour */
+static int nommu_mapping_error(dma_addr_t dma_addr)
 {
+#ifdef CONFIG_X86_32
+	return 0;
+#else
+	return (dma_addr == bad_dma_address);
+#endif
 }
 
+
 const struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
-	.unmap_single = nommu_unmap_single,
 	.map_sg = nommu_map_sg,
-	.unmap_sg = nommu_unmap_sg,
+	.mapping_error = nommu_mapping_error,
 	.is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 82a0a674a003..490da7f4b8d0 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -11,11 +11,18 @@
 
 int swiotlb __read_mostly;
 
+static dma_addr_t
+swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
+			int direction)
+{
+	return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
+}
+
 const struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
-	.map_single = swiotlb_map_single,
+	.map_single = swiotlb_map_single_phys,
 	.unmap_single = swiotlb_unmap_single,
 	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
 	.sync_single_for_device = swiotlb_sync_single_for_device,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
new file mode 100644
index 000000000000..3004d716539d
--- /dev/null
+++ b/arch/x86/kernel/process.c
@@ -0,0 +1,44 @@
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+
+struct kmem_cache *task_xstate_cachep;
+
+int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
+{
+	*dst = *src;
+	if (src->thread.xstate) {
+		dst->thread.xstate = kmem_cache_alloc(task_xstate_cachep,
+						      GFP_KERNEL);
+		if (!dst->thread.xstate)
+			return -ENOMEM;
+		WARN_ON((unsigned long)dst->thread.xstate & 15);
+		memcpy(dst->thread.xstate, src->thread.xstate, xstate_size);
+	}
+	return 0;
+}
+
+void free_thread_xstate(struct task_struct *tsk)
+{
+	if (tsk->thread.xstate) {
+		kmem_cache_free(task_xstate_cachep, tsk->thread.xstate);
+		tsk->thread.xstate = NULL;
+	}
+}
+
+void free_thread_info(struct thread_info *ti)
+{
+	free_thread_xstate(ti->task);
+	free_pages((unsigned long)ti, get_order(THREAD_SIZE));
+}
+
+void arch_task_cache_init(void)
+{
+        task_xstate_cachep =
+        	kmem_cache_create("task_xstate", xstate_size,
+				  __alignof__(union thread_xstate),
+				  SLAB_PANIC, NULL);
+}
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index be3c7a299f02..7adad088e373 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -36,6 +36,7 @@
 #include <linux/personality.h>
 #include <linux/tick.h>
 #include <linux/percpu.h>
+#include <linux/prctl.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -45,7 +46,6 @@
 #include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/desc.h>
-#include <asm/vm86.h>
 #ifdef CONFIG_MATH_EMULATION
 #include <asm/math_emu.h>
 #endif
@@ -82,7 +82,6 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
 void disable_hlt(void)
 {
@@ -114,20 +113,13 @@ void default_idle(void)
 
 		local_irq_disable();
 		if (!need_resched()) {
-			ktime_t t0, t1;
-			u64 t0n, t1n;
-
-			t0 = ktime_get();
-			t0n = ktime_to_ns(t0);
 			safe_halt();	/* enables interrupts racelessly */
 			local_irq_disable();
-			t1 = ktime_get();
-			t1n = ktime_to_ns(t1);
-			sched_clock_idle_wakeup_event(t1n - t0n);
 		}
 		local_irq_enable();
 		current_thread_info()->status |= TS_POLLING;
 	} else {
+		local_irq_enable();
 		/* loop is done by the caller */
 		cpu_relax();
 	}
@@ -143,6 +135,7 @@ EXPORT_SYMBOL(default_idle);
  */
 static void poll_idle(void)
 {
+	local_irq_enable();
 	cpu_relax();
 }
 
@@ -190,9 +183,6 @@ void cpu_idle(void)
 		while (!need_resched()) {
 			void (*idle)(void);
 
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
 			check_pgt_cache();
 			rmb();
 			idle = pm_idle;
@@ -220,40 +210,19 @@ static void do_nothing(void *unused)
 {
 }
 
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
 void cpu_idle_wait(void)
 {
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-		/*
-		 * We waited 1 sec, if a CPU still did not call idle
-		 * it may be because it is in idle and not waking up
-		 * because it has nothing to do.
-		 * Give all the remaining CPUS a kick.
-		 */
-		smp_call_function_mask(map, do_nothing, NULL, 0);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 0, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
@@ -273,8 +242,11 @@ void mwait_idle_with_hints(unsigned long ax, unsigned long cx)
 		__monitor((void *)&current_thread_info()->flags, 0, 0);
 		smp_mb();
 		if (!need_resched())
-			__mwait(ax, cx);
-	}
+			__sti_mwait(ax, cx);
+		else
+			local_irq_enable();
+	} else
+		local_irq_enable();
 }
 
 /* Default MONITOR/MWAIT with no hints, used for default C1 state */
@@ -357,7 +329,7 @@ void __show_registers(struct pt_regs *regs, int all)
 			init_utsname()->version);
 
 	printk("EIP: %04x:[<%08lx>] EFLAGS: %08lx CPU: %d\n",
-			0xffff & regs->cs, regs->ip, regs->flags,
+			(u16)regs->cs, regs->ip, regs->flags,
 			smp_processor_id());
 	print_symbol("EIP is at %s\n", regs->ip);
 
@@ -366,8 +338,7 @@ void __show_registers(struct pt_regs *regs, int all)
 	printk("ESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
 		regs->si, regs->di, regs->bp, sp);
 	printk(" DS: %04x ES: %04x FS: %04x GS: %04x SS: %04x\n",
-	       regs->ds & 0xffff, regs->es & 0xffff,
-	       regs->fs & 0xffff, gs, ss);
+	       (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, ss);
 
 	if (!all)
 		return;
@@ -538,11 +509,30 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 	return err;
 }
 
-#ifdef CONFIG_SECCOMP
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	__asm__("movl %0, %%gs" :: "r"(0));
+	regs->fs		= 0;
+	set_fs(USER_DS);
+	regs->ds		= __USER_DS;
+	regs->es		= __USER_DS;
+	regs->ss		= __USER_DS;
+	regs->cs		= __USER_CS;
+	regs->ip		= new_ip;
+	regs->sp		= new_sp;
+	/*
+	 * Free the old FP and other extended state
+	 */
+	free_thread_xstate(current);
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
 static void hard_disable_TSC(void)
 {
 	write_cr4(read_cr4() | X86_CR4_TSD);
 }
+
 void disable_TSC(void)
 {
 	preempt_disable();
@@ -554,11 +544,47 @@ void disable_TSC(void)
 		hard_disable_TSC();
 	preempt_enable();
 }
+
 static void hard_enable_TSC(void)
 {
 	write_cr4(read_cr4() & ~X86_CR4_TSD);
 }
-#endif /* CONFIG_SECCOMP */
+
+void enable_TSC(void)
+{
+	preempt_disable();
+	if (test_and_clear_thread_flag(TIF_NOTSC))
+		/*
+		 * Must flip the CPU state synchronously with
+		 * TIF_NOTSC in the current running context.
+		 */
+		hard_enable_TSC();
+	preempt_enable();
+}
+
+int get_tsc_mode(unsigned long adr)
+{
+	unsigned int val;
+
+	if (test_thread_flag(TIF_NOTSC))
+		val = PR_TSC_SIGSEGV;
+	else
+		val = PR_TSC_ENABLE;
+
+	return put_user(val, (unsigned int __user *)adr);
+}
+
+int set_tsc_mode(unsigned int val)
+{
+	if (val == PR_TSC_SIGSEGV)
+		disable_TSC();
+	else if (val == PR_TSC_ENABLE)
+		enable_TSC();
+	else
+		return -EINVAL;
+
+	return 0;
+}
 
 static noinline void
 __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
@@ -575,12 +601,12 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		/* we clear debugctl to make sure DS
 		 * is not in use when we change it */
 		debugctl = 0;
-		wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
+		update_debugctlmsr(0);
 		wrmsr(MSR_IA32_DS_AREA, next->ds_area_msr, 0);
 	}
 
 	if (next->debugctlmsr != debugctl)
-		wrmsr(MSR_IA32_DEBUGCTLMSR, next->debugctlmsr, 0);
+		update_debugctlmsr(next->debugctlmsr);
 
 	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
 		set_debugreg(next->debugreg0, 0);
@@ -592,7 +618,6 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		set_debugreg(next->debugreg7, 7);
 	}
 
-#ifdef CONFIG_SECCOMP
 	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
 	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
 		/* prev and next are different */
@@ -601,7 +626,6 @@ __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p,
 		else
 			hard_enable_TSC();
 	}
-#endif
 
 #ifdef X86_BTS
 	if (test_tsk_thread_flag(prev_p, TIF_BTS_TRACE_TS))
@@ -683,7 +707,7 @@ struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct
 
 	/* we're going to use this soon, after a few expensive things */
 	if (next_p->fpu_counter > 5)
-		prefetch(&next->i387.fxsave);
+		prefetch(next->xstate);
 
 	/*
 	 * Reload esp0.
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 3baf9b9f4c87..891af1a1b48a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -36,6 +36,7 @@
 #include <linux/kprobes.h>
 #include <linux/kdebug.h>
 #include <linux/tick.h>
+#include <linux/prctl.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -63,7 +64,6 @@ EXPORT_SYMBOL(boot_option_idle_override);
  */
 void (*pm_idle)(void);
 EXPORT_SYMBOL(pm_idle);
-static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
 
 static ATOMIC_NOTIFIER_HEAD(idle_notifier);
 
@@ -108,16 +108,8 @@ void default_idle(void)
 	smp_mb();
 	local_irq_disable();
 	if (!need_resched()) {
-		ktime_t t0, t1;
-		u64 t0n, t1n;
-
-		t0 = ktime_get();
-		t0n = ktime_to_ns(t0);
 		safe_halt();	/* enables interrupts racelessly */
 		local_irq_disable();
-		t1 = ktime_get();
-		t1n = ktime_to_ns(t1);
-		sched_clock_idle_wakeup_event(t1n - t0n);
 	}
 	local_irq_enable();
 	current_thread_info()->status |= TS_POLLING;
@@ -173,9 +165,6 @@ void cpu_idle(void)
 		while (!need_resched()) {
 			void (*idle)(void);
 
-			if (__get_cpu_var(cpu_idle_state))
-				__get_cpu_var(cpu_idle_state) = 0;
-
 			rmb();
 			idle = pm_idle;
 			if (!idle)
@@ -207,40 +196,19 @@ static void do_nothing(void *unused)
 {
 }
 
+/*
+ * cpu_idle_wait - Used to ensure that all the CPUs discard old value of
+ * pm_idle and update to new pm_idle value. Required while changing pm_idle
+ * handler on SMP systems.
+ *
+ * Caller must have changed pm_idle to the new value before the call. Old
+ * pm_idle value will not be used by any CPU after the return of this function.
+ */
 void cpu_idle_wait(void)
 {
-	unsigned int cpu, this_cpu = get_cpu();
-	cpumask_t map, tmp = current->cpus_allowed;
-
-	set_cpus_allowed(current, cpumask_of_cpu(this_cpu));
-	put_cpu();
-
-	cpus_clear(map);
-	for_each_online_cpu(cpu) {
-		per_cpu(cpu_idle_state, cpu) = 1;
-		cpu_set(cpu, map);
-	}
-
-	__get_cpu_var(cpu_idle_state) = 0;
-
-	wmb();
-	do {
-		ssleep(1);
-		for_each_online_cpu(cpu) {
-			if (cpu_isset(cpu, map) && !per_cpu(cpu_idle_state, cpu))
-				cpu_clear(cpu, map);
-		}
-		cpus_and(map, map, cpu_online_map);
-		/*
-		 * We waited 1 sec, if a CPU still did not call idle
-		 * it may be because it is in idle and not waking up
-		 * because it has nothing to do.
-		 * Give all the remaining CPUS a kick.
-		 */
-		smp_call_function_mask(map, do_nothing, 0, 0);
-	} while (!cpus_empty(map));
-
-	set_cpus_allowed(current, tmp);
+	smp_mb();
+	/* kick all the CPUs so that they exit out of pm_idle */
+	smp_call_function(do_nothing, NULL, 0, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
@@ -553,6 +521,83 @@ out:
 	return err;
 }
 
+void
+start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
+{
+	asm volatile("movl %0, %%fs; movl %0, %%es; movl %0, %%ds" :: "r"(0));
+	load_gs_index(0);
+	regs->ip		= new_ip;
+	regs->sp		= new_sp;
+	write_pda(oldrsp, new_sp);
+	regs->cs		= __USER_CS;
+	regs->ss		= __USER_DS;
+	regs->flags		= 0x200;
+	set_fs(USER_DS);
+	/*
+	 * Free the old FP and other extended state
+	 */
+	free_thread_xstate(current);
+}
+EXPORT_SYMBOL_GPL(start_thread);
+
+static void hard_disable_TSC(void)
+{
+	write_cr4(read_cr4() | X86_CR4_TSD);
+}
+
+void disable_TSC(void)
+{
+	preempt_disable();
+	if (!test_and_set_thread_flag(TIF_NOTSC))
+		/*
+		 * Must flip the CPU state synchronously with
+		 * TIF_NOTSC in the current running context.
+		 */
+		hard_disable_TSC();
+	preempt_enable();
+}
+
+static void hard_enable_TSC(void)
+{
+	write_cr4(read_cr4() & ~X86_CR4_TSD);
+}
+
+void enable_TSC(void)
+{
+	preempt_disable();
+	if (test_and_clear_thread_flag(TIF_NOTSC))
+		/*
+		 * Must flip the CPU state synchronously with
+		 * TIF_NOTSC in the current running context.
+		 */
+		hard_enable_TSC();
+	preempt_enable();
+}
+
+int get_tsc_mode(unsigned long adr)
+{
+	unsigned int val;
+
+	if (test_thread_flag(TIF_NOTSC))
+		val = PR_TSC_SIGSEGV;
+	else
+		val = PR_TSC_ENABLE;
+
+	return put_user(val, (unsigned int __user *)adr);
+}
+
+int set_tsc_mode(unsigned int val)
+{
+	if (val == PR_TSC_SIGSEGV)
+		disable_TSC();
+	else if (val == PR_TSC_ENABLE)
+		enable_TSC();
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
 /*
  * This special macro can be used to load a debugging register
  */
@@ -573,12 +618,12 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 		/* we clear debugctl to make sure DS
 		 * is not in use when we change it */
 		debugctl = 0;
-		wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
+		update_debugctlmsr(0);
 		wrmsrl(MSR_IA32_DS_AREA, next->ds_area_msr);
 	}
 
 	if (next->debugctlmsr != debugctl)
-		wrmsrl(MSR_IA32_DEBUGCTLMSR, next->debugctlmsr);
+		update_debugctlmsr(next->debugctlmsr);
 
 	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
 		loaddebug(next, 0);
@@ -590,6 +635,15 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 		loaddebug(next, 7);
 	}
 
+	if (test_tsk_thread_flag(prev_p, TIF_NOTSC) ^
+	    test_tsk_thread_flag(next_p, TIF_NOTSC)) {
+		/* prev and next are different */
+		if (test_tsk_thread_flag(next_p, TIF_NOTSC))
+			hard_disable_TSC();
+		else
+			hard_enable_TSC();
+	}
+
 	if (test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
 		/*
 		 * Copy the relevant range of the IO bitmap.
@@ -632,7 +686,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* we're going to use this soon, after a few expensive things */
 	if (next_p->fpu_counter>5)
-		prefetch(&next->i387.fxsave);
+		prefetch(next->xstate);
 
 	/*
 	 * Reload esp0, LDT and the page table pointer:
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index f41fdc98efb1..559c1b027417 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -323,6 +323,16 @@ static int putreg(struct task_struct *child,
 		return set_flags(child, value);
 
 #ifdef CONFIG_X86_64
+	/*
+	 * Orig_ax is really just a flag with small positive and
+	 * negative values, so make sure to always sign-extend it
+	 * from 32 bits so that it works correctly regardless of
+	 * whether we come from a 32-bit environment or not.
+	 */
+	case offsetof(struct user_regs_struct, orig_ax):
+		value = (long) (s32) value;
+		break;
+
 	case offsetof(struct user_regs_struct,fs_base):
 		if (value >= TASK_SIZE_OF(child))
 			return -EIO;
@@ -590,21 +600,6 @@ static int ptrace_bts_read_record(struct task_struct *child,
 	return sizeof(ret);
 }
 
-static int ptrace_bts_write_record(struct task_struct *child,
-				   const struct bts_struct *in)
-{
-	int retval;
-
-	if (!child->thread.ds_area_msr)
-		return -ENXIO;
-
-	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
-	if (retval)
-		return retval;
-
-	return sizeof(*in);
-}
-
 static int ptrace_bts_clear(struct task_struct *child)
 {
 	if (!child->thread.ds_area_msr)
@@ -647,75 +642,6 @@ static int ptrace_bts_drain(struct task_struct *child,
 	return end;
 }
 
-static int ptrace_bts_realloc(struct task_struct *child,
-			      int size, int reduce_size)
-{
-	unsigned long rlim, vm;
-	int ret, old_size;
-
-	if (size < 0)
-		return -EINVAL;
-
-	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
-	if (old_size < 0)
-		return old_size;
-
-	ret = ds_free((void **)&child->thread.ds_area_msr);
-	if (ret < 0)
-		goto out;
-
-	size >>= PAGE_SHIFT;
-	old_size >>= PAGE_SHIFT;
-
-	current->mm->total_vm  -= old_size;
-	current->mm->locked_vm -= old_size;
-
-	if (size == 0)
-		goto out;
-
-	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->total_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->total_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
-	vm = current->mm->locked_vm  + size;
-	if (rlim < vm) {
-		ret = -ENOMEM;
-
-		if (!reduce_size)
-			goto out;
-
-		size = rlim - current->mm->locked_vm;
-		if (size <= 0)
-			goto out;
-	}
-
-	ret = ds_allocate((void **)&child->thread.ds_area_msr,
-			  size << PAGE_SHIFT);
-	if (ret < 0)
-		goto out;
-
-	current->mm->total_vm  += size;
-	current->mm->locked_vm += size;
-
-out:
-	if (child->thread.ds_area_msr)
-		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-	else
-		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
-
-	return ret;
-}
-
 static int ptrace_bts_config(struct task_struct *child,
 			     long cfg_size,
 			     const struct ptrace_bts_config __user *ucfg)
@@ -818,6 +744,91 @@ static int ptrace_bts_status(struct task_struct *child,
 	return sizeof(cfg);
 }
 
+
+static int ptrace_bts_write_record(struct task_struct *child,
+				   const struct bts_struct *in)
+{
+	int retval;
+
+	if (!child->thread.ds_area_msr)
+		return -ENXIO;
+
+	retval = ds_write_bts((void *)child->thread.ds_area_msr, in);
+	if (retval)
+		return retval;
+
+	return sizeof(*in);
+}
+
+static int ptrace_bts_realloc(struct task_struct *child,
+			      int size, int reduce_size)
+{
+	unsigned long rlim, vm;
+	int ret, old_size;
+
+	if (size < 0)
+		return -EINVAL;
+
+	old_size = ds_get_bts_size((void *)child->thread.ds_area_msr);
+	if (old_size < 0)
+		return old_size;
+
+	ret = ds_free((void **)&child->thread.ds_area_msr);
+	if (ret < 0)
+		goto out;
+
+	size >>= PAGE_SHIFT;
+	old_size >>= PAGE_SHIFT;
+
+	current->mm->total_vm  -= old_size;
+	current->mm->locked_vm -= old_size;
+
+	if (size == 0)
+		goto out;
+
+	rlim = current->signal->rlim[RLIMIT_AS].rlim_cur >> PAGE_SHIFT;
+	vm = current->mm->total_vm  + size;
+	if (rlim < vm) {
+		ret = -ENOMEM;
+
+		if (!reduce_size)
+			goto out;
+
+		size = rlim - current->mm->total_vm;
+		if (size <= 0)
+			goto out;
+	}
+
+	rlim = current->signal->rlim[RLIMIT_MEMLOCK].rlim_cur >> PAGE_SHIFT;
+	vm = current->mm->locked_vm  + size;
+	if (rlim < vm) {
+		ret = -ENOMEM;
+
+		if (!reduce_size)
+			goto out;
+
+		size = rlim - current->mm->locked_vm;
+		if (size <= 0)
+			goto out;
+	}
+
+	ret = ds_allocate((void **)&child->thread.ds_area_msr,
+			  size << PAGE_SHIFT);
+	if (ret < 0)
+		goto out;
+
+	current->mm->total_vm  += size;
+	current->mm->locked_vm += size;
+
+out:
+	if (child->thread.ds_area_msr)
+		set_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+	else
+		clear_tsk_thread_flag(child, TIF_DS_AREA_MSR);
+
+	return ret;
+}
+
 void ptrace_bts_take_timestamp(struct task_struct *tsk,
 			       enum bts_qualifier qualifier)
 {
@@ -1045,10 +1056,17 @@ static int putreg32(struct task_struct *child, unsigned regno, u32 value)
 	R32(esi, si);
 	R32(ebp, bp);
 	R32(eax, ax);
-	R32(orig_eax, orig_ax);
 	R32(eip, ip);
 	R32(esp, sp);
 
+	case offsetof(struct user32, regs.orig_eax):
+		/*
+		 * Sign-extend the value so that orig_eax = -1
+		 * causes (long)orig_ax < 0 tests to fire correctly.
+		 */
+		regs->orig_ax = (long) (s32) value;
+		break;
+
 	case offsetof(struct user32, regs.eflags):
 		return set_flags(child, value);
 
@@ -1438,7 +1456,6 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 /* notification of system call entry/exit
  * - triggered by current->work.syscall_trace
  */
-__attribute__((regparm(3)))
 int do_syscall_trace(struct pt_regs *regs, int entryexit)
 {
 	int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU);
diff --git a/arch/x86/kernel/quirks.c b/arch/x86/kernel/quirks.c
index c47208fc5932..d89a648fe710 100644
--- a/arch/x86/kernel/quirks.c
+++ b/arch/x86/kernel/quirks.c
@@ -363,6 +363,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0051,
 			nvidia_force_enable_hpet);
 
 /* LPC bridges */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0260,
+			nvidia_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0360,
 			nvidia_force_enable_hpet);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, 0x0361,
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 7fd6ac43e4a1..19c9386ac118 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -1,5 +1,4 @@
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/reboot.h>
 #include <linux/init.h>
 #include <linux/pm.h>
@@ -152,6 +151,24 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "0WF810"),
 		},
 	},
+	{       /* Handle problems with rebooting on Dell Optiplex 745's DFF*/
+		.callback = set_bios_reboot,
+		.ident = "Dell OptiPlex 745",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+			DMI_MATCH(DMI_BOARD_NAME, "0MM599"),
+		},
+	},
+	{       /* Handle problems with rebooting on Dell Optiplex 745 with 0KW626 */
+		.callback = set_bios_reboot,
+		.ident = "Dell OptiPlex 745",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 745"),
+			DMI_MATCH(DMI_BOARD_NAME, "0KW626"),
+		},
+	},
 	{	/* Handle problems with rebooting on Dell 2400's */
 		.callback = set_bios_reboot,
 		.ident = "Dell PowerEdge 2400",
@@ -326,6 +343,10 @@ static inline void kb_wait(void)
 	}
 }
 
+void __attribute__((weak)) mach_reboot_fixups(void)
+{
+}
+
 static void native_machine_emergency_restart(void)
 {
 	int i;
@@ -337,6 +358,8 @@ static void native_machine_emergency_restart(void)
 		/* Could also try the reset bit in the Hammer NB */
 		switch (reboot_type) {
 		case BOOT_KBD:
+			mach_reboot_fixups(); /* for board specific fixups */
+
 			for (i = 0; i < 10; i++) {
 				kb_wait();
 				udelay(50);
@@ -388,16 +411,16 @@ static void native_machine_shutdown(void)
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
 	if ((reboot_cpu != -1) && (reboot_cpu < NR_CPUS) &&
-		cpu_isset(reboot_cpu, cpu_online_map))
+		cpu_online(reboot_cpu))
 		reboot_cpu_id = reboot_cpu;
 #endif
 
 	/* Make certain the cpu I'm about to reboot on is online */
-	if (!cpu_isset(reboot_cpu_id, cpu_online_map))
+	if (!cpu_online(reboot_cpu_id))
 		reboot_cpu_id = smp_processor_id();
 
 	/* Make certain I only run on the appropriate processor */
-	set_cpus_allowed(current, cpumask_of_cpu(reboot_cpu_id));
+	set_cpus_allowed_ptr(current, &cpumask_of_cpu(reboot_cpu_id));
 
 	/* O.K Now that I'm on the appropriate processor,
 	 * stop all of the others.
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index f151d6fae462..c30fe25d470d 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -9,18 +9,19 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 #include <asm/kexec.h>
+#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
 
 /*
  * Must be relocatable PIC code callable as a C function
  */
 
 #define PTR(x) (x << 2)
-#define PAGE_ALIGNED (1 << PAGE_SHIFT)
-#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
-#define PAE_PGD_ATTR 0x01 /* _PAGE_PRESENT */
+#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
+#define PAE_PGD_ATTR (_PAGE_PRESENT)
 
 	.text
-	.align PAGE_ALIGNED
+	.align PAGE_SIZE
 	.globl relocate_kernel
 relocate_kernel:
 	movl	8(%esp), %ebp /* list of pages */
@@ -155,7 +156,7 @@ relocate_new_kernel:
 	movl	%eax, %cr3
 
 	/* setup a new stack at the end of the physical control page */
-	lea	4096(%edi), %esp
+	lea	PAGE_SIZE(%edi), %esp
 
 	/* jump to identity mapped page */
 	movl    %edi, %eax
@@ -168,16 +169,16 @@ identity_mapped:
 	pushl   %edx
 
 	/* Set cr0 to a known state:
-	 * 31 0 == Paging disabled
-	 * 18 0 == Alignment check disabled
-	 * 16 0 == Write protect disabled
-	 * 3  0 == No task switch
-	 * 2  0 == Don't do FP software emulation.
-	 * 0  1 == Proctected mode enabled
+	 *  - Paging disabled
+	 *  - Alignment check disabled
+	 *  - Write protect disabled
+	 *  - No task switch
+	 *  - Don't do FP software emulation.
+	 *  - Proctected mode enabled
 	 */
 	movl	%cr0, %eax
-	andl	$~((1<<31)|(1<<18)|(1<<16)|(1<<3)|(1<<2)), %eax
-	orl	$(1<<0), %eax
+	andl	$~(X86_CR0_PG | X86_CR0_AM | X86_CR0_WP | X86_CR0_TS | X86_CR0_EM), %eax
+	orl	$(X86_CR0_PE), %eax
 	movl	%eax, %cr0
 
 	/* clear cr4 if applicable */
@@ -186,8 +187,7 @@ identity_mapped:
 	/* Set cr4 to a known state:
 	 * Setting everything to zero seems safe.
 	 */
-	movl	%cr4, %eax
-	andl	$0, %eax
+	xorl	%eax, %eax
 	movl	%eax, %cr4
 
 	jmp 1f
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index 14e95872c6a3..f5afe665a82b 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -9,17 +9,18 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 #include <asm/kexec.h>
+#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
 
 /*
  * Must be relocatable PIC code callable as a C function
  */
 
 #define PTR(x) (x << 3)
-#define PAGE_ALIGNED (1 << PAGE_SHIFT)
-#define PAGE_ATTR 0x63 /* _PAGE_PRESENT|_PAGE_RW|_PAGE_ACCESSED|_PAGE_DIRTY */
+#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 
 	.text
-	.align PAGE_ALIGNED
+	.align PAGE_SIZE
 	.code64
 	.globl relocate_kernel
 relocate_kernel:
@@ -160,7 +161,7 @@ relocate_new_kernel:
 	movq	%r9, %cr3
 
 	/* setup a new stack at the end of the physical control page */
-	lea	4096(%r8), %rsp
+	lea	PAGE_SIZE(%r8), %rsp
 
 	/* jump to identity mapped page */
 	addq	$(identity_mapped - relocate_kernel), %r8
@@ -172,33 +173,22 @@ identity_mapped:
 	pushq   %rdx
 
 	/* Set cr0 to a known state:
-	 * 31 1 == Paging enabled
-	 * 18 0 == Alignment check disabled
-	 * 16 0 == Write protect disabled
-	 * 3  0 == No task switch
-	 * 2  0 == Don't do FP software emulation.
-	 * 0  1 == Proctected mode enabled
+	 *  - Paging enabled
+	 *  - Alignment check disabled
+	 *  - Write protect disabled
+	 *  - No task switch
+	 *  - Don't do FP software emulation.
+	 *  - Proctected mode enabled
 	 */
 	movq	%cr0, %rax
-	andq	$~((1<<18)|(1<<16)|(1<<3)|(1<<2)), %rax
-	orl	$((1<<31)|(1<<0)), %eax
+	andq	$~(X86_CR0_AM | X86_CR0_WP | X86_CR0_TS | X86_CR0_EM), %rax
+	orl	$(X86_CR0_PG | X86_CR0_PE), %eax
 	movq	%rax, %cr0
 
 	/* Set cr4 to a known state:
-	 * 10 0 == xmm exceptions disabled
-	 * 9  0 == xmm registers instructions disabled
-	 * 8  0 == performance monitoring counter disabled
-	 * 7  0 == page global disabled
-	 * 6  0 == machine check exceptions disabled
-	 * 5  1 == physical address extension enabled
-	 * 4  0 == page size extensions	disabled
-	 * 3  0 == Debug extensions disabled
-	 * 2  0 == Time stamp disable (disabled)
-	 * 1  0 == Protected mode virtual interrupts disabled
-	 * 0  0 == VME disabled
+	 *  - physical address extension enabled
 	 */
-
-	movq	$((1<<5)), %rax
+	movq	$X86_CR4_PAE, %rax
 	movq	%rax, %cr4
 
 	jmp 1f
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index eb9b1a198f5e..9615eee9b775 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -9,7 +9,6 @@
 #include <asm/vsyscall.h>
 
 #ifdef CONFIG_X86_32
-# define CMOS_YEARS_OFFS 1900
 /*
  * This is a special lock that is owned by the CPU and holds the index
  * register we are working with.  It is required for NMI access to the
@@ -17,14 +16,11 @@
  */
 volatile unsigned long cmos_lock = 0;
 EXPORT_SYMBOL(cmos_lock);
-#else
-/*
- * x86-64 systems only exists since 2002.
- * This will work up to Dec 31, 2100
- */
-# define CMOS_YEARS_OFFS 2000
 #endif
 
+/* For two digit years assume time is always after that */
+#define CMOS_YEARS_OFFS 2000
+
 DEFINE_SPINLOCK(rtc_lock);
 EXPORT_SYMBOL(rtc_lock);
 
@@ -98,7 +94,7 @@ int mach_set_rtc_mmss(unsigned long nowtime)
 
 unsigned long mach_get_cmos_time(void)
 {
-	unsigned int year, mon, day, hour, min, sec, century = 0;
+	unsigned int status, year, mon, day, hour, min, sec, century = 0;
 
 	/*
 	 * If UIP is clear, then we have >= 244 microseconds before
@@ -116,14 +112,16 @@ unsigned long mach_get_cmos_time(void)
 	mon = CMOS_READ(RTC_MONTH);
 	year = CMOS_READ(RTC_YEAR);
 
-#if defined(CONFIG_ACPI) && defined(CONFIG_X86_64)
-	/* CHECKME: Is this really 64bit only ??? */
+#ifdef CONFIG_ACPI
 	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
 	    acpi_gbl_FADT.century)
 		century = CMOS_READ(acpi_gbl_FADT.century);
 #endif
 
-	if (RTC_ALWAYS_BCD || !(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY)) {
+	status = CMOS_READ(RTC_CONTROL);
+	WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
+
+	if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
 		BCD_TO_BIN(sec);
 		BCD_TO_BIN(min);
 		BCD_TO_BIN(hour);
@@ -136,11 +134,8 @@ unsigned long mach_get_cmos_time(void)
 		BCD_TO_BIN(century);
 		year += century * 100;
 		printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
-	} else {
+	} else
 		year += CMOS_YEARS_OFFS;
-		if (year < 1970)
-			year += 100;
-	}
 
 	return mktime(year, mon, day, hour, min, sec);
 }
@@ -151,8 +146,8 @@ unsigned char rtc_cmos_read(unsigned char addr)
 	unsigned char val;
 
 	lock_cmos_prefix(addr);
-	outb_p(addr, RTC_PORT(0));
-	val = inb_p(RTC_PORT(1));
+	outb(addr, RTC_PORT(0));
+	val = inb(RTC_PORT(1));
 	lock_cmos_suffix(addr);
 	return val;
 }
@@ -161,8 +156,8 @@ EXPORT_SYMBOL(rtc_cmos_read);
 void rtc_cmos_write(unsigned char val, unsigned char addr)
 {
 	lock_cmos_prefix(addr);
-	outb_p(addr, RTC_PORT(0));
-	outb_p(val, RTC_PORT(1));
+	outb(addr, RTC_PORT(0));
+	outb(val, RTC_PORT(1));
 	lock_cmos_suffix(addr);
 }
 EXPORT_SYMBOL(rtc_cmos_write);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
new file mode 100644
index 000000000000..0d1f44ae6eea
--- /dev/null
+++ b/arch/x86/kernel/setup.c
@@ -0,0 +1,139 @@
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/percpu.h>
+#include <asm/smp.h>
+#include <asm/percpu.h>
+#include <asm/sections.h>
+#include <asm/processor.h>
+#include <asm/setup.h>
+#include <asm/topology.h>
+#include <asm/mpspec.h>
+#include <asm/apicdef.h>
+
+unsigned int num_processors;
+unsigned disabled_cpus __cpuinitdata;
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+EXPORT_SYMBOL(boot_cpu_physical_apicid);
+
+physid_mask_t phys_cpu_present_map;
+
+DEFINE_PER_CPU(u16, x86_cpu_to_apicid) = BAD_APICID;
+EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+/*
+ * Copy data used in early init routines from the initial arrays to the
+ * per cpu data areas.  These arrays then become expendable and the
+ * *_early_ptr's are zeroed indicating that the static arrays are gone.
+ */
+static void __init setup_per_cpu_maps(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		per_cpu(x86_cpu_to_apicid, cpu) = x86_cpu_to_apicid_init[cpu];
+		per_cpu(x86_bios_cpu_apicid, cpu) =
+						x86_bios_cpu_apicid_init[cpu];
+#ifdef CONFIG_NUMA
+		per_cpu(x86_cpu_to_node_map, cpu) =
+						x86_cpu_to_node_map_init[cpu];
+#endif
+	}
+
+	/* indicate the early static arrays will soon be gone */
+	x86_cpu_to_apicid_early_ptr = NULL;
+	x86_bios_cpu_apicid_early_ptr = NULL;
+#ifdef CONFIG_NUMA
+	x86_cpu_to_node_map_early_ptr = NULL;
+#endif
+}
+
+#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
+cpumask_t *cpumask_of_cpu_map __read_mostly;
+EXPORT_SYMBOL(cpumask_of_cpu_map);
+
+/* requires nr_cpu_ids to be initialized */
+static void __init setup_cpumask_of_cpu(void)
+{
+	int i;
+
+	/* alloc_bootmem zeroes memory */
+	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
+	for (i = 0; i < nr_cpu_ids; i++)
+		cpu_set(i, cpumask_of_cpu_map[i]);
+}
+#else
+static inline void setup_cpumask_of_cpu(void) { }
+#endif
+
+#ifdef CONFIG_X86_32
+/*
+ * Great future not-so-futuristic plan: make i386 and x86_64 do it
+ * the same way
+ */
+unsigned long __per_cpu_offset[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(__per_cpu_offset);
+#endif
+
+/*
+ * Great future plan:
+ * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
+ * Always point %gs to its beginning
+ */
+void __init setup_per_cpu_areas(void)
+{
+	int i, highest_cpu = 0;
+	unsigned long size;
+
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
+
+	/* Copy section for each CPU (we discard the original) */
+	size = PERCPU_ENOUGH_ROOM;
+	printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n",
+			  size);
+
+	for_each_possible_cpu(i) {
+		char *ptr;
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+		ptr = alloc_bootmem_pages(size);
+#else
+		int node = early_cpu_to_node(i);
+		if (!node_online(node) || !NODE_DATA(node)) {
+			ptr = alloc_bootmem_pages(size);
+			printk(KERN_INFO
+			       "cpu %d has no node or node-local memory\n", i);
+		}
+		else
+			ptr = alloc_bootmem_pages_node(NODE_DATA(node), size);
+#endif
+		if (!ptr)
+			panic("Cannot allocate cpu data for CPU %d\n", i);
+#ifdef CONFIG_X86_64
+		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
+#else
+		__per_cpu_offset[i] = ptr - __per_cpu_start;
+#endif
+		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+
+		highest_cpu = i;
+	}
+
+	nr_cpu_ids = highest_cpu + 1;
+	printk(KERN_DEBUG "NR_CPUS: %d, nr_cpu_ids: %d\n", NR_CPUS, nr_cpu_ids);
+
+	/* Setup percpu data maps */
+	setup_per_cpu_maps();
+
+	/* Setup cpumask_of_cpu map */
+	setup_cpumask_of_cpu();
+}
+
+#endif
diff --git a/arch/x86/kernel/setup64.c b/arch/x86/kernel/setup64.c
index 309366f8f603..aee0e8200777 100644
--- a/arch/x86/kernel/setup64.c
+++ b/arch/x86/kernel/setup64.c
@@ -11,6 +11,7 @@
 #include <linux/bootmem.h>
 #include <linux/bitops.h>
 #include <linux/module.h>
+#include <linux/kgdb.h>
 #include <asm/pda.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -23,6 +24,7 @@
 #include <asm/proto.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
+#include <asm/genapic.h>
 
 #ifndef CONFIG_DEBUG_BOOT_PARAMS
 struct boot_params __initdata boot_params;
@@ -72,8 +74,8 @@ int force_personality32 = 0;
 Control non executable heap for 32bit processes.
 To control the stack too use noexec=off
 
-on	PROT_READ does not imply PROT_EXEC for 32bit processes
-off	PROT_READ implies PROT_EXEC (default)
+on	PROT_READ does not imply PROT_EXEC for 32bit processes (default)
+off	PROT_READ implies PROT_EXEC
 */
 static int __init nonx32_setup(char *str)
 {
@@ -85,81 +87,6 @@ static int __init nonx32_setup(char *str)
 }
 __setup("noexec32=", nonx32_setup);
 
-/*
- * Copy data used in early init routines from the initial arrays to the
- * per cpu data areas.  These arrays then become expendable and the
- * *_early_ptr's are zeroed indicating that the static arrays are gone.
- */
-static void __init setup_per_cpu_maps(void)
-{
-	int cpu;
-
-	for_each_possible_cpu(cpu) {
-#ifdef CONFIG_SMP
-		if (per_cpu_offset(cpu)) {
-#endif
-			per_cpu(x86_cpu_to_apicid, cpu) =
-						x86_cpu_to_apicid_init[cpu];
-			per_cpu(x86_bios_cpu_apicid, cpu) =
-						x86_bios_cpu_apicid_init[cpu];
-#ifdef CONFIG_NUMA
-			per_cpu(x86_cpu_to_node_map, cpu) =
-						x86_cpu_to_node_map_init[cpu];
-#endif
-#ifdef CONFIG_SMP
-		}
-		else
-			printk(KERN_NOTICE "per_cpu_offset zero for cpu %d\n",
-									cpu);
-#endif
-	}
-
-	/* indicate the early static arrays will soon be gone */
-	x86_cpu_to_apicid_early_ptr = NULL;
-	x86_bios_cpu_apicid_early_ptr = NULL;
-#ifdef CONFIG_NUMA
-	x86_cpu_to_node_map_early_ptr = NULL;
-#endif
-}
-
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
-void __init setup_per_cpu_areas(void)
-{ 
-	int i;
-	unsigned long size;
-
-#ifdef CONFIG_HOTPLUG_CPU
-	prefill_possible_map();
-#endif
-
-	/* Copy section for each CPU (we discard the original) */
-	size = PERCPU_ENOUGH_ROOM;
-
-	printk(KERN_INFO "PERCPU: Allocating %lu bytes of per cpu data\n", size);
-	for_each_cpu_mask (i, cpu_possible_map) {
-		char *ptr;
-
-		if (!NODE_DATA(early_cpu_to_node(i))) {
-			printk("cpu with no node %d, num_online_nodes %d\n",
-			       i, num_online_nodes());
-			ptr = alloc_bootmem_pages(size);
-		} else { 
-			ptr = alloc_bootmem_pages_node(NODE_DATA(early_cpu_to_node(i)), size);
-		}
-		if (!ptr)
-			panic("Cannot allocate cpu data for CPU %d\n", i);
-		cpu_pda(i)->data_offset = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
-	}
-
-	/* setup percpu data maps early */
-	setup_per_cpu_maps();
-} 
-
 void pda_init(int cpu)
 { 
 	struct x8664_pda *pda = cpu_pda(cpu);
@@ -325,6 +252,17 @@ void __cpuinit cpu_init (void)
 	load_TR_desc();
 	load_LDT(&init_mm.context);
 
+#ifdef CONFIG_KGDB
+	/*
+	 * If the kgdb is connected no debug regs should be altered.  This
+	 * is only applicable when KGDB and a KGDB I/O module are built
+	 * into the kernel and you are using early debugging with
+	 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
+	 */
+	if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
+		arch_kgdb_ops.correct_hw_break();
+	else {
+#endif
 	/*
 	 * Clear all 6 debug registers:
 	 */
@@ -335,8 +273,15 @@ void __cpuinit cpu_init (void)
 	set_debugreg(0UL, 3);
 	set_debugreg(0UL, 6);
 	set_debugreg(0UL, 7);
+#ifdef CONFIG_KGDB
+	/* If the kgdb is connected no debug regs should be altered. */
+	}
+#endif
 
 	fpu_init(); 
 
 	raw_local_save_flags(kernel_eflags);
+
+	if (is_uv_system())
+		uv_cpu_init();
 }
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index a1d7071a51c9..78828b0f604f 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -39,6 +39,7 @@
 #include <linux/efi.h>
 #include <linux/init.h>
 #include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
 #include <linux/nodemask.h>
 #include <linux/kexec.h>
 #include <linux/crash_dump.h>
@@ -62,8 +63,9 @@
 #include <asm/io.h>
 #include <asm/vmi.h>
 #include <setup_arch.h>
-#include <bios_ebda.h>
+#include <asm/bios_ebda.h>
 #include <asm/cacheflush.h>
+#include <asm/processor.h>
 
 /* This value is set up by the early boot code to point to the value
    immediately after the boot time page tables.  It contains a *physical*
@@ -154,6 +156,8 @@ struct cpuinfo_x86 new_cpu_data __cpuinitdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
 struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
 EXPORT_SYMBOL(boot_cpu_data);
 
+unsigned int def_to_bigsmp;
+
 #ifndef CONFIG_X86_PAE
 unsigned long mmu_cr4_features;
 #else
@@ -189,7 +193,7 @@ EXPORT_SYMBOL(ist_info);
 extern void early_cpu_init(void);
 extern int root_mountflags;
 
-unsigned long saved_videomode;
+unsigned long saved_video_mode;
 
 #define RAMDISK_IMAGE_START_MASK	0x07FF
 #define RAMDISK_PROMPT_FLAG		0x8000
@@ -227,7 +231,7 @@ static inline void copy_edd(void)
 }
 #endif
 
-int __initdata user_defined_memmap = 0;
+int __initdata user_defined_memmap;
 
 /*
  * "mem=nopentium" disables the 4MB page tables.
@@ -385,15 +389,56 @@ unsigned long __init find_max_low_pfn(void)
 	return max_low_pfn;
 }
 
+#define BIOS_EBDA_SEGMENT 0x40E
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
 /*
- * workaround for Dell systems that neglect to reserve EBDA
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
  */
 static void __init reserve_ebda_region(void)
 {
-	unsigned int addr;
-	addr = get_bios_ebda();
-	if (addr)
-		reserve_bootmem(addr, PAGE_SIZE, BOOTMEM_DEFAULT);
+	unsigned int lowmem, ebda_addr;
+
+	/* To determine the position of the EBDA and the */
+	/* end of conventional memory, we need to look at */
+	/* the BIOS data area. In a paravirtual environment */
+	/* that area is absent. We'll just have to assume */
+	/* that the paravirt case can handle memory setup */
+	/* correctly, without our help. */
+	if (paravirt_enabled())
+		return;
+
+	/* end of low (conventional) memory */
+	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+	lowmem <<= 10;
+
+	/* start of EBDA area */
+	ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
+	ebda_addr <<= 4;
+
+	/* Fixup: bios puts an EBDA in the top 64K segment */
+	/* of conventional memory, but does not adjust lowmem. */
+	if ((lowmem - ebda_addr) <= 0x10000)
+		lowmem = ebda_addr;
+
+	/* Fixup: bios does not report an EBDA at all. */
+	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+		lowmem = 0x9f000;
+
+	/* Paranoia: should never happen, but... */
+	if ((lowmem == 0) || (lowmem >= 0x100000))
+		lowmem = 0x9f000;
+
+	/* reserve all memory between lowmem and the 1MB mark */
+	reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
@@ -406,8 +451,6 @@ static unsigned long __init setup_memory(void)
 	 */
 	min_low_pfn = PFN_UP(init_pg_tables_end);
 
-	find_max_pfn();
-
 	max_low_pfn = find_max_low_pfn();
 
 #ifdef CONFIG_HIGHMEM
@@ -619,16 +662,9 @@ void __init setup_bootmem_allocator(void)
 	 */
 	reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
 
-	/* reserve EBDA region, it's a 4K region */
+	/* reserve EBDA region */
 	reserve_ebda_region();
 
-    /* could be an AMD 768MPX chipset. Reserve a page  before VGA to prevent
-       PCI prefetch into it (errata #56). Usually the page is reserved anyways,
-       unless you have no PS/2 mouse plugged in. */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86 == 6)
-	     reserve_bootmem(0xa0000 - 4096, 4096, BOOTMEM_DEFAULT);
-
 #ifdef CONFIG_SMP
 	/*
 	 * But first pinch a few for the stack/trampoline stuff
@@ -654,6 +690,8 @@ void __init setup_bootmem_allocator(void)
 #endif
 	numa_kva_reserve();
 	reserve_crashkernel();
+
+	reserve_ibft_region();
 }
 
 /*
@@ -689,6 +727,18 @@ char * __init __attribute__((weak)) memory_setup(void)
 	return machine_specific_memory_setup();
 }
 
+#ifdef CONFIG_NUMA
+/*
+ * In the golden day, when everything among i386 and x86_64 will be
+ * integrated, this will not live here
+ */
+void *x86_cpu_to_node_map_early_ptr;
+int x86_cpu_to_node_map_init[NR_CPUS] = {
+	[0 ... NR_CPUS-1] = NUMA_NO_NODE
+};
+DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
+#endif
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -716,7 +766,7 @@ void __init setup_arch(char **cmdline_p)
 	edid_info = boot_params.edid_info;
 	apm_info.bios = boot_params.apm_bios_info;
 	ist_info = boot_params.ist_info;
-	saved_videomode = boot_params.hdr.vid_mode;
+	saved_video_mode = boot_params.hdr.vid_mode;
 	if( boot_params.sys_desc_table.length != 0 ) {
 		set_mca_bus(boot_params.sys_desc_table.table[3] & 0x2);
 		machine_id = boot_params.sys_desc_table.table[0];
@@ -764,12 +814,13 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_init();
 
-	max_low_pfn = setup_memory();
-
 	/* update e820 for memory not covered by WB MTRRs */
+	propagate_e820_map();
 	mtrr_bp_init();
 	if (mtrr_trim_uncached_memory(max_pfn))
-		max_low_pfn = setup_memory();
+		propagate_e820_map();
+
+	max_low_pfn = setup_memory();
 
 #ifdef CONFIG_VMI
 	/*
@@ -821,6 +872,18 @@ void __init setup_arch(char **cmdline_p)
 
 	io_delay_init();
 
+#ifdef CONFIG_X86_SMP
+	/*
+	 * setup to use the early static init tables during kernel startup
+	 * X86_SMP will exclude sub-arches that don't deal well with it.
+	 */
+	x86_cpu_to_apicid_early_ptr = (void *)x86_cpu_to_apicid_init;
+	x86_bios_cpu_apicid_early_ptr = (void *)x86_bios_cpu_apicid_init;
+#ifdef CONFIG_NUMA
+	x86_cpu_to_node_map_early_ptr = (void *)x86_cpu_to_node_map_init;
+#endif
+#endif
+
 #ifdef CONFIG_X86_GENERICARCH
 	generic_apic_probe();
 #endif
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index 7637dc91c79b..c2ec3dcb6b99 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -33,6 +33,7 @@
 #include <linux/acpi.h>
 #include <linux/kallsyms.h>
 #include <linux/edd.h>
+#include <linux/iscsi_ibft.h>
 #include <linux/mmzone.h>
 #include <linux/kexec.h>
 #include <linux/cpufreq.h>
@@ -58,7 +59,6 @@
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 #include <asm/setup.h>
-#include <asm/mach_apic.h>
 #include <asm/numa.h>
 #include <asm/sections.h>
 #include <asm/dmi.h>
@@ -66,7 +66,9 @@
 #include <asm/mce.h>
 #include <asm/ds.h>
 #include <asm/topology.h>
+#include <asm/trampoline.h>
 
+#include <mach_apic.h>
 #ifdef CONFIG_PARAVIRT
 #include <asm/paravirt.h>
 #else
@@ -248,6 +250,7 @@ static void __init reserve_crashkernel(void)
 				(unsigned long)(total_mem >> 20));
 		crashk_res.start = crash_base;
 		crashk_res.end   = crash_base + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_res);
 	}
 }
 #else
@@ -322,6 +325,11 @@ void __init setup_arch(char **cmdline_p)
 
 	finish_e820_parsing();
 
+	/* after parse_early_param, so could debug it */
+	insert_resource(&iomem_resource, &code_resource);
+	insert_resource(&iomem_resource, &data_resource);
+	insert_resource(&iomem_resource, &bss_resource);
+
 	early_gart_iommu_check();
 
 	e820_register_active_regions(0, 0, -1UL);
@@ -341,10 +349,12 @@ void __init setup_arch(char **cmdline_p)
 
 	check_efer();
 
-	init_memory_mapping(0, (end_pfn_map << PAGE_SHIFT));
+	max_pfn_mapped = init_memory_mapping(0, (max_pfn_mapped << PAGE_SHIFT));
 	if (efi_enabled)
 		efi_init();
 
+	vsmp_init();
+
 	dmi_scan_machine();
 
 	io_delay_init();
@@ -389,6 +399,8 @@ void __init setup_arch(char **cmdline_p)
 
 	early_res_to_bootmem();
 
+	dma32_reserve_bootmem();
+
 #ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
@@ -411,11 +423,14 @@ void __init setup_arch(char **cmdline_p)
 		unsigned long end_of_mem    = end_pfn << PAGE_SHIFT;
 
 		if (ramdisk_end <= end_of_mem) {
-			reserve_bootmem_generic(ramdisk_image, ramdisk_size);
+			/*
+			 * don't need to reserve again, already reserved early
+			 * in x86_64_start_kernel, and early_res_to_bootmem
+			 * convert that to reserved in bootmem
+			 */
 			initrd_start = ramdisk_image + PAGE_OFFSET;
 			initrd_end = initrd_start+ramdisk_size;
 		} else {
-			/* Assumes everything on node 0 */
 			free_bootmem(ramdisk_image, ramdisk_size);
 			printk(KERN_ERR "initrd extends beyond end of memory "
 			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
@@ -425,6 +440,9 @@ void __init setup_arch(char **cmdline_p)
 	}
 #endif
 	reserve_crashkernel();
+
+	reserve_ibft_region();
+
 	paging_init();
 	map_vsyscall();
 
@@ -450,7 +468,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * We trust e820 completely. No explicit ROM probing in memory.
 	 */
-	e820_reserve_resources(&code_resource, &data_resource, &bss_resource);
+	e820_reserve_resources();
 	e820_mark_nosave_regions();
 
 	/* request I/O space for devices used on all i[345]86 PCs */
@@ -552,9 +570,9 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 	bits = c->x86_coreid_bits;
 
 	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->phys_proc_id & ((1 << bits)-1);
-	/* Convert the APIC ID into the socket ID */
-	c->phys_proc_id = phys_pkg_id(bits);
+	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
+	/* Convert the initial APIC ID into the socket ID */
+	c->phys_proc_id = c->initial_apicid >> bits;
 
 #ifdef CONFIG_NUMA
 	node = c->phys_proc_id;
@@ -571,7 +589,7 @@ static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
 		   If that doesn't result in a usable node fall back to the
 		   path for the previous case.  */
 
-		int ht_nodeid = apicid - (cpu_data(0).phys_proc_id << bits);
+		int ht_nodeid = c->initial_apicid;
 
 		if (ht_nodeid >= 0 &&
 		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
@@ -677,7 +695,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 
 	/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
 	   3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
-	clear_bit(0*32+31, (unsigned long *)&c->x86_capability);
+	clear_cpu_cap(c, 0*32+31);
 
 	/* On C+ stepping K8 rep microcode works well for copy/memset */
 	level = cpuid_eax(1);
@@ -721,6 +739,19 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 
 	if (amd_apic_timer_broken())
 		disable_apic_timer = 1;
+
+	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
+		unsigned long long tseg;
+
+		/*
+		 * Split up direct mapping around the TSEG SMM area.
+		 * Don't do it for gbpages because there seems very little
+		 * benefit in doing so.
+		 */
+		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg) &&
+		(tseg >> PMD_SHIFT) < (max_pfn_mapped >> (PMD_SHIFT-PAGE_SHIFT)))
+			set_memory_4k((unsigned long)__va(tseg), 1);
+	}
 }
 
 void __cpuinit detect_ht(struct cpuinfo_x86 *c)
@@ -801,7 +832,7 @@ static void __cpuinit srat_detect_node(void)
 	/* Don't do the funky fallback heuristics the AMD version employs
 	   for now. */
 	node = apicid_to_node[apicid];
-	if (node == NUMA_NO_NODE)
+	if (node == NUMA_NO_NODE || !node_online(node))
 		node = first_node(node_online_map);
 	numa_set_node(cpu, node);
 
@@ -813,7 +844,7 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
 	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
 	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 }
 
 static void __cpuinit init_intel(struct cpuinfo_x86 *c)
@@ -856,9 +887,6 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 
 	if (c->x86 == 15)
 		c->x86_cache_alignment = c->x86_clflush_size * 2;
-	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
-	    (c->x86 == 0x6 && c->x86_model >= 0x0e))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	if (c->x86 == 6)
 		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
 	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
@@ -867,6 +895,32 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	srat_detect_node();
 }
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	if (c->x86 == 0x6 && c->x86_model >= 0xf)
+		set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+}
+
+static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
+{
+	/* Cache sizes */
+	unsigned n;
+
+	n = c->extended_cpuid_level;
+	if (n >= 0x80000008) {
+		unsigned eax = cpuid_eax(0x80000008);
+		c->x86_virt_bits = (eax >> 8) & 0xff;
+		c->x86_phys_bits = eax & 0xff;
+	}
+
+	if (c->x86 == 0x6 && c->x86_model >= 0xf) {
+		c->x86_cache_alignment = c->x86_clflush_size * 2;
+		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
+	}
+	set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
+}
+
 static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 {
 	char *v = c->x86_vendor_id;
@@ -875,6 +929,8 @@ static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
 		c->x86_vendor = X86_VENDOR_AMD;
 	else if (!strcmp(v, "GenuineIntel"))
 		c->x86_vendor = X86_VENDOR_INTEL;
+	else if (!strcmp(v, "CentaurHauls"))
+		c->x86_vendor = X86_VENDOR_CENTAUR;
 	else
 		c->x86_vendor = X86_VENDOR_UNKNOWN;
 }
@@ -922,15 +978,16 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 			c->x86 += (tfms >> 20) & 0xff;
 		if (c->x86 >= 0x6)
 			c->x86_model += ((tfms >> 16) & 0xF) << 4;
-		if (c->x86_capability[0] & (1<<19))
+		if (test_cpu_cap(c, X86_FEATURE_CLFLSH))
 			c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
 	} else {
 		/* Have CPUID level 0 only - unheard of */
 		c->x86 = 4;
 	}
 
+	c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff;
 #ifdef CONFIG_SMP
-	c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
+	c->phys_proc_id = c->initial_apicid;
 #endif
 	/* AMD-defined flags: level 0x80000001 */
 	xlvl = cpuid_eax(0x80000000);
@@ -956,12 +1013,22 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
+
+	clear_cpu_cap(c, X86_FEATURE_PAT);
+
 	switch (c->x86_vendor) {
 	case X86_VENDOR_AMD:
 		early_init_amd(c);
+		if (c->x86 >= 0xf && c->x86 <= 0x11)
+			set_cpu_cap(c, X86_FEATURE_PAT);
 		break;
 	case X86_VENDOR_INTEL:
 		early_init_intel(c);
+		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+			set_cpu_cap(c, X86_FEATURE_PAT);
+		break;
+	case X86_VENDOR_CENTAUR:
+		early_init_centaur(c);
 		break;
 	}
 
@@ -999,6 +1066,10 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 		init_intel(c);
 		break;
 
+	case X86_VENDOR_CENTAUR:
+		init_centaur(c);
+		break;
+
 	case X86_VENDOR_UNKNOWN:
 	default:
 		display_cacheinfo(c);
@@ -1028,14 +1099,24 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 #endif
 	select_idle_routine(c);
 
-	if (c != &boot_cpu_data)
-		mtrr_ap_init();
 #ifdef CONFIG_NUMA
 	numa_add_cpu(smp_processor_id());
 #endif
 
 }
 
+void __cpuinit identify_boot_cpu(void)
+{
+	identify_cpu(&boot_cpu_data);
+}
+
+void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
+{
+	BUG_ON(c == &boot_cpu_data);
+	identify_cpu(c);
+	mtrr_ap_init();
+}
+
 static __init int setup_noclflush(char *arg)
 {
 	setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
@@ -1064,123 +1145,3 @@ static __init int setup_disablecpuid(char *arg)
 	return 1;
 }
 __setup("clearcpuid=", setup_disablecpuid);
-
-/*
- *	Get CPU information for use by the procfs.
- */
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-	struct cpuinfo_x86 *c = v;
-	int cpu = 0, i;
-
-#ifdef CONFIG_SMP
-	cpu = c->cpu_index;
-#endif
-
-	seq_printf(m, "processor\t: %u\n"
-		   "vendor_id\t: %s\n"
-		   "cpu family\t: %d\n"
-		   "model\t\t: %d\n"
-		   "model name\t: %s\n",
-		   (unsigned)cpu,
-		   c->x86_vendor_id[0] ? c->x86_vendor_id : "unknown",
-		   c->x86,
-		   (int)c->x86_model,
-		   c->x86_model_id[0] ? c->x86_model_id : "unknown");
-
-	if (c->x86_mask || c->cpuid_level >= 0)
-		seq_printf(m, "stepping\t: %d\n", c->x86_mask);
-	else
-		seq_printf(m, "stepping\t: unknown\n");
-
-	if (cpu_has(c, X86_FEATURE_TSC)) {
-		unsigned int freq = cpufreq_quick_get((unsigned)cpu);
-
-		if (!freq)
-			freq = cpu_khz;
-		seq_printf(m, "cpu MHz\t\t: %u.%03u\n",
-			   freq / 1000, (freq % 1000));
-	}
-
-	/* Cache size */
-	if (c->x86_cache_size >= 0)
-		seq_printf(m, "cache size\t: %d KB\n", c->x86_cache_size);
-
-#ifdef CONFIG_SMP
-	if (smp_num_siblings * c->x86_max_cores > 1) {
-		seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
-		seq_printf(m, "siblings\t: %d\n",
-			       cpus_weight(per_cpu(cpu_core_map, cpu)));
-		seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
-		seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
-	}
-#endif
-
-	seq_printf(m,
-		   "fpu\t\t: yes\n"
-		   "fpu_exception\t: yes\n"
-		   "cpuid level\t: %d\n"
-		   "wp\t\t: yes\n"
-		   "flags\t\t:",
-		   c->cpuid_level);
-
-	for (i = 0; i < 32*NCAPINTS; i++)
-		if (cpu_has(c, i) && x86_cap_flags[i] != NULL)
-			seq_printf(m, " %s", x86_cap_flags[i]);
-
-	seq_printf(m, "\nbogomips\t: %lu.%02lu\n",
-		   c->loops_per_jiffy/(500000/HZ),
-		   (c->loops_per_jiffy/(5000/HZ)) % 100);
-
-	if (c->x86_tlbsize > 0)
-		seq_printf(m, "TLB size\t: %d 4K pages\n", c->x86_tlbsize);
-	seq_printf(m, "clflush size\t: %d\n", c->x86_clflush_size);
-	seq_printf(m, "cache_alignment\t: %d\n", c->x86_cache_alignment);
-
-	seq_printf(m, "address sizes\t: %u bits physical, %u bits virtual\n",
-		   c->x86_phys_bits, c->x86_virt_bits);
-
-	seq_printf(m, "power management:");
-	for (i = 0; i < 32; i++) {
-		if (c->x86_power & (1 << i)) {
-			if (i < ARRAY_SIZE(x86_power_flags) &&
-			    x86_power_flags[i])
-				seq_printf(m, "%s%s",
-					   x86_power_flags[i][0]?" ":"",
-					   x86_power_flags[i]);
-			else
-				seq_printf(m, " [%d]", i);
-		}
-	}
-
-	seq_printf(m, "\n\n");
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	if (*pos == 0)	/* just in case, cpu 0 is not the first */
-		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < NR_CPUS && cpu_online(*pos))
-		return &cpu_data(*pos);
-	return NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	*pos = next_cpu(*pos, cpu_online_map);
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start = c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
diff --git a/arch/x86/kernel/sigframe_32.h b/arch/x86/kernel/sigframe.h
index 0b2221711dad..72bbb519d2dc 100644
--- a/arch/x86/kernel/sigframe_32.h
+++ b/arch/x86/kernel/sigframe.h
@@ -1,5 +1,5 @@
-struct sigframe
-{
+#ifdef CONFIG_X86_32
+struct sigframe {
 	char __user *pretcode;
 	int sig;
 	struct sigcontext sc;
@@ -8,8 +8,7 @@ struct sigframe
 	char retcode[8];
 };
 
-struct rt_sigframe
-{
+struct rt_sigframe {
 	char __user *pretcode;
 	int sig;
 	struct siginfo __user *pinfo;
@@ -19,3 +18,10 @@ struct rt_sigframe
 	struct _fpstate fpstate;
 	char retcode[8];
 };
+#else
+struct rt_sigframe {
+	char __user *pretcode;
+	struct ucontext uc;
+	struct siginfo info;
+};
+#endif
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index caee1f002fed..f1b117930837 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -4,32 +4,44 @@
  *  1997-11-28  Modified for POSIX.1b signals by Richard Henderson
  *  2000-06-20  Pentium III FXSR, SSE support by Gareth Hughes
  */
+#include <linux/list.h>
 
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
+#include <linux/personality.h>
+#include <linux/binfmts.h>
+#include <linux/suspend.h>
 #include <linux/kernel.h>
+#include <linux/ptrace.h>
 #include <linux/signal.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
 #include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/wait.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/suspend.h>
-#include <linux/ptrace.h>
 #include <linux/elf.h>
-#include <linux/binfmts.h>
+#include <linux/smp.h>
+#include <linux/mm.h>
+
 #include <asm/processor.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/vdso.h>
-#include "sigframe_32.h"
 
-#define DEBUG_SIG 0
+#include "sigframe.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+#define __FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
+			 X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+			 X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+			 X86_EFLAGS_CF)
+
+#ifdef CONFIG_X86_32
+# define FIX_EFLAGS	(__FIX_EFLAGS | X86_EFLAGS_RF)
+#else
+# define FIX_EFLAGS	__FIX_EFLAGS
+#endif
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -46,10 +58,11 @@ sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
 	set_thread_flag(TIF_RESTORE_SIGMASK);
+
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage int 
+asmlinkage int
 sys_sigaction(int sig, const struct old_sigaction __user *act,
 	      struct old_sigaction __user *oact)
 {
@@ -58,10 +71,12 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 
 	if (act) {
 		old_sigset_t mask;
+
 		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
 		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
 		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
 			return -EFAULT;
+
 		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
 		__get_user(mask, &act->sa_mask);
 		siginitset(&new_ka.sa.sa_mask, mask);
@@ -74,6 +89,7 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
 		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
 			return -EFAULT;
+
 		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
 		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
 	}
@@ -81,10 +97,12 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 	return ret;
 }
 
-asmlinkage int
-sys_sigaltstack(unsigned long bx)
+asmlinkage int sys_sigaltstack(unsigned long bx)
 {
-	/* This is needed to make gcc realize it doesn't own the "struct pt_regs" */
+	/*
+	 * This is needed to make gcc realize it doesn't own the
+	 * "struct pt_regs"
+	 */
 	struct pt_regs *regs = (struct pt_regs *)&bx;
 	const stack_t __user *uss = (const stack_t __user *)bx;
 	stack_t __user *uoss = (stack_t __user *)regs->cx;
@@ -96,9 +114,9 @@ sys_sigaltstack(unsigned long bx)
 /*
  * Do a signal return; undo the signal stack.
  */
-
 static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax)
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
+		   unsigned long *pax)
 {
 	unsigned int err = 0;
 
@@ -120,37 +138,29 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax
 #define GET_SEG(seg)							\
 	{ unsigned short tmp;						\
 	  err |= __get_user(tmp, &sc->seg);				\
-	  loadsegment(seg,tmp); }
-
-#define	FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_RF |		 \
-			 X86_EFLAGS_OF | X86_EFLAGS_DF |		 \
-			 X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
-			 X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
+	  loadsegment(seg, tmp); }
 
 	GET_SEG(gs);
 	COPY_SEG(fs);
 	COPY_SEG(es);
 	COPY_SEG(ds);
-	COPY(di);
-	COPY(si);
-	COPY(bp);
-	COPY(sp);
-	COPY(bx);
-	COPY(dx);
-	COPY(cx);
-	COPY(ip);
+	COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx);
+	COPY(dx); COPY(cx); COPY(ip);
 	COPY_SEG_STRICT(cs);
 	COPY_SEG_STRICT(ss);
-	
+
 	{
 		unsigned int tmpflags;
+
 		err |= __get_user(tmpflags, &sc->flags);
-		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
+		regs->flags = (regs->flags & ~FIX_EFLAGS) |
+						(tmpflags & FIX_EFLAGS);
 		regs->orig_ax = -1;		/* disable syscall checks */
 	}
 
 	{
-		struct _fpstate __user * buf;
+		struct _fpstate __user *buf;
+
 		err |= __get_user(buf, &sc->fpstate);
 		if (buf) {
 			if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
@@ -158,6 +168,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax
 			err |= restore_i387(buf);
 		} else {
 			struct task_struct *me = current;
+
 			if (used_math()) {
 				clear_fpu(me);
 				clear_used_math();
@@ -165,24 +176,26 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int *peax
 		}
 	}
 
-	err |= __get_user(*peax, &sc->ax);
+	err |= __get_user(*pax, &sc->ax);
 	return err;
 
 badframe:
 	return 1;
 }
 
-asmlinkage int sys_sigreturn(unsigned long __unused)
+asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
 {
-	struct pt_regs *regs = (struct pt_regs *) &__unused;
-	struct sigframe __user *frame = (struct sigframe __user *)(regs->sp - 8);
+	struct sigframe __user *frame;
+	struct pt_regs *regs;
+	unsigned long ax;
 	sigset_t set;
-	int ax;
+
+	regs = (struct pt_regs *) &__unused;
+	frame = (struct sigframe __user *)(regs->sp - 8);
 
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_NSIG_WORDS > 1
+	if (__get_user(set.sig[0], &frame->sc.oldmask) || (_NSIG_WORDS > 1
 		&& __copy_from_user(&set.sig[1], &frame->extramask,
 				    sizeof(frame->extramask))))
 		goto badframe;
@@ -192,33 +205,35 @@ asmlinkage int sys_sigreturn(unsigned long __unused)
 	current->blocked = set;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	
+
 	if (restore_sigcontext(regs, &frame->sc, &ax))
 		goto badframe;
 	return ax;
 
 badframe:
 	if (show_unhandled_signals && printk_ratelimit()) {
-		printk("%s%s[%d] bad frame in sigreturn frame:%p ip:%lx"
-		       " sp:%lx oeax:%lx",
+		printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:"
+			"%p ip:%lx sp:%lx oeax:%lx",
 		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
 		    current->comm, task_pid_nr(current), frame, regs->ip,
 		    regs->sp, regs->orig_ax);
 		print_vma_addr(" in ", regs->ip);
-		printk("\n");
+		printk(KERN_CONT "\n");
 	}
 
 	force_sig(SIGSEGV, current);
+
 	return 0;
-}	
+}
 
 asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 {
-	struct pt_regs *regs = (struct pt_regs *) &__unused;
-	struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->sp - 4);
+	struct pt_regs *regs = (struct pt_regs *)&__unused;
+	struct rt_sigframe __user *frame;
+	unsigned long ax;
 	sigset_t set;
-	int ax;
 
+	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
 	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
 	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
@@ -229,7 +244,7 @@ asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 	current->blocked = set;
 	recalc_sigpending();
 	spin_unlock_irq(&current->sighand->siglock);
-	
+
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
 		goto badframe;
 
@@ -241,12 +256,11 @@ asmlinkage int sys_rt_sigreturn(unsigned long __unused)
 badframe:
 	force_sig(SIGSEGV, current);
 	return 0;
-}	
+}
 
 /*
  * Set up a signal frame.
  */
-
 static int
 setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
 		 struct pt_regs *regs, unsigned long mask)
@@ -277,9 +291,9 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
 
 	tmp = save_i387(fpstate);
 	if (tmp < 0)
-	  err = 1;
+		err = 1;
 	else
-	  err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
+		err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
 
 	/* non-iBCS2 extensions.. */
 	err |= __put_user(mask, &sc->oldmask);
@@ -292,7 +306,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
  * Determine which stack to use..
  */
 static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
+get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
 {
 	unsigned long sp;
 
@@ -310,32 +324,30 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 	if (ka->sa.sa_flags & SA_ONSTACK) {
 		if (sas_ss_flags(sp) == 0)
 			sp = current->sas_ss_sp + current->sas_ss_size;
-	}
-
-	/* This is the legacy signal stack switching. */
-	else if ((regs->ss & 0xffff) != __USER_DS &&
-		 !(ka->sa.sa_flags & SA_RESTORER) &&
-		 ka->sa.sa_restorer) {
-		sp = (unsigned long) ka->sa.sa_restorer;
+	} else {
+		/* This is the legacy signal stack switching. */
+		if ((regs->ss & 0xffff) != __USER_DS &&
+			!(ka->sa.sa_flags & SA_RESTORER) &&
+				ka->sa.sa_restorer)
+			sp = (unsigned long) ka->sa.sa_restorer;
 	}
 
 	sp -= frame_size;
-	/* Align the stack pointer according to the i386 ABI,
-	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	/*
+	 * Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0.
+	 */
 	sp = ((sp + 4) & -16ul) - 4;
+
 	return (void __user *) sp;
 }
 
-/* These symbols are defined with the addresses in the vsyscall page.
-   See vsyscall-sigreturn.S.  */
-extern void __user __kernel_sigreturn;
-extern void __user __kernel_rt_sigreturn;
-
-static int setup_frame(int sig, struct k_sigaction *ka,
-		       sigset_t *set, struct pt_regs * regs)
+static int
+setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
+	    struct pt_regs *regs)
 {
-	void __user *restorer;
 	struct sigframe __user *frame;
+	void __user *restorer;
 	int err = 0;
 	int usig;
 
@@ -365,7 +377,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 			goto give_sigsegv;
 	}
 
-	if (current->binfmt->hasvdso)
+	if (current->mm->context.vdso)
 		restorer = VDSO32_SYMBOL(current->mm->context.vdso, sigreturn);
 	else
 		restorer = &frame->retcode;
@@ -374,9 +386,9 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 
 	/* Set up to return from userspace.  */
 	err |= __put_user(restorer, &frame->pretcode);
-	 
+
 	/*
-	 * This is popl %eax ; movl $,%eax ; int $0x80
+	 * This is popl %eax ; movl $__NR_sigreturn, %eax ; int $0x80
 	 *
 	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
 	 * reasons and because gdb uses it as a signature to notice
@@ -390,11 +402,11 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->sp = (unsigned long) frame;
-	regs->ip = (unsigned long) ka->sa.sa_handler;
-	regs->ax = (unsigned long) sig;
-	regs->dx = (unsigned long) 0;
-	regs->cx = (unsigned long) 0;
+	regs->sp = (unsigned long)frame;
+	regs->ip = (unsigned long)ka->sa.sa_handler;
+	regs->ax = (unsigned long)sig;
+	regs->dx = 0;
+	regs->cx = 0;
 
 	regs->ds = __USER_DS;
 	regs->es = __USER_DS;
@@ -407,15 +419,10 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	 * The tracer may want to single-step inside the
 	 * handler too.
 	 */
-	regs->flags &= ~TF_MASK;
+	regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
-		current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
-
 	return 0;
 
 give_sigsegv:
@@ -424,10 +431,10 @@ give_sigsegv:
 }
 
 static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs * regs)
+			  sigset_t *set, struct pt_regs *regs)
 {
-	void __user *restorer;
 	struct rt_sigframe __user *frame;
+	void __user *restorer;
 	int err = 0;
 	int usig;
 
@@ -457,7 +464,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
 	err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
-			        regs, set->sig[0]);
+				regs, set->sig[0]);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
 		goto give_sigsegv;
@@ -467,9 +474,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (ka->sa.sa_flags & SA_RESTORER)
 		restorer = ka->sa.sa_restorer;
 	err |= __put_user(restorer, &frame->pretcode);
-	 
+
 	/*
-	 * This is movl $,%ax ; int $0x80
+	 * This is movl $__NR_rt_sigreturn, %ax ; int $0x80
 	 *
 	 * WE DO NOT USE IT ANY MORE! It's only left here for historical
 	 * reasons and because gdb uses it as a signature to notice
@@ -483,11 +490,11 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Set up registers for signal handler */
-	regs->sp = (unsigned long) frame;
-	regs->ip = (unsigned long) ka->sa.sa_handler;
-	regs->ax = (unsigned long) usig;
-	regs->dx = (unsigned long) &frame->info;
-	regs->cx = (unsigned long) &frame->uc;
+	regs->sp = (unsigned long)frame;
+	regs->ip = (unsigned long)ka->sa.sa_handler;
+	regs->ax = (unsigned long)usig;
+	regs->dx = (unsigned long)&frame->info;
+	regs->cx = (unsigned long)&frame->uc;
 
 	regs->ds = __USER_DS;
 	regs->es = __USER_DS;
@@ -500,15 +507,10 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	 * The tracer may want to single-step inside the
 	 * handler too.
 	 */
-	regs->flags &= ~TF_MASK;
+	regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
 
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
-		current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
-
 	return 0;
 
 give_sigsegv:
@@ -517,33 +519,33 @@ give_sigsegv:
 }
 
 /*
- * OK, we're invoking a handler
- */	
-
+ * OK, we're invoking a handler:
+ */
 static int
 handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      sigset_t *oldset,	struct pt_regs * regs)
+	      sigset_t *oldset, struct pt_regs *regs)
 {
 	int ret;
 
 	/* Are we from a system call? */
-	if (regs->orig_ax >= 0) {
+	if ((long)regs->orig_ax >= 0) {
 		/* If so, check system call restarting.. */
 		switch (regs->ax) {
-		        case -ERESTART_RESTARTBLOCK:
-			case -ERESTARTNOHAND:
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			regs->ax = -EINTR;
+			break;
+
+		case -ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
 				regs->ax = -EINTR;
 				break;
-
-			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->ax = -EINTR;
-					break;
-				}
-			/* fallthrough */
-			case -ERESTARTNOINTR:
-				regs->ax = regs->orig_ax;
-				regs->ip -= 2;
+			}
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			regs->ax = regs->orig_ax;
+			regs->ip -= 2;
+			break;
 		}
 	}
 
@@ -561,16 +563,17 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	else
 		ret = setup_frame(sig, ka, oldset, regs);
 
-	if (ret == 0) {
-		spin_lock_irq(&current->sighand->siglock);
-		sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-		if (!(ka->sa.sa_flags & SA_NODEFER))
-			sigaddset(&current->blocked,sig);
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
+	if (ret)
+		return ret;
 
-	return ret;
+	spin_lock_irq(&current->sighand->siglock);
+	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
+	if (!(ka->sa.sa_flags & SA_NODEFER))
+		sigaddset(&current->blocked, sig);
+	recalc_sigpending();
+	spin_unlock_irq(&current->sighand->siglock);
+
+	return 0;
 }
 
 /*
@@ -580,18 +583,17 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
  */
 static void do_signal(struct pt_regs *regs)
 {
+	struct k_sigaction ka;
 	siginfo_t info;
 	int signr;
-	struct k_sigaction ka;
 	sigset_t *oldset;
 
 	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
- 	 * if so.  vm86 regs switched out by assembly code
- 	 * before reaching here, so testing against kernel
- 	 * CS suffices.
+	 * We want the common case to go fast, which is why we may in certain
+	 * cases get here from kernel mode. Just return without doing anything
+	 * if so.
+	 * X86_32: vm86 regs switched out by assembly code before reaching
+	 * here, so testing against kernel CS suffices.
 	 */
 	if (!user_mode(regs))
 		return;
@@ -603,29 +605,31 @@ static void do_signal(struct pt_regs *regs)
 
 	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
 	if (signr > 0) {
-		/* Re-enable any watchpoints before delivering the
+		/*
+		 * Re-enable any watchpoints before delivering the
 		 * signal to user space. The processor register will
 		 * have been cleared if the watchpoint triggered
 		 * inside the kernel.
 		 */
-		if (unlikely(current->thread.debugreg7))
+		if (current->thread.debugreg7)
 			set_debugreg(current->thread.debugreg7, 7);
 
-		/* Whee!  Actually deliver the signal.  */
+		/* Whee! Actually deliver the signal.  */
 		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/* a signal was successfully delivered; the saved
+			/*
+			 * a signal was successfully delivered; the saved
 			 * sigmask will have been stored in the signal frame,
 			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
+			 * clear the TIF_RESTORE_SIGMASK flag
+			 */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
 		}
-
 		return;
 	}
 
 	/* Did we come from a system call? */
-	if (regs->orig_ax >= 0) {
+	if ((long)regs->orig_ax >= 0) {
 		/* Restart the system call - no handlers present */
 		switch (regs->ax) {
 		case -ERESTARTNOHAND:
@@ -642,8 +646,10 @@ static void do_signal(struct pt_regs *regs)
 		}
 	}
 
-	/* if there's no signal to deliver, we just put the saved sigmask
-	 * back */
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
 	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
 		clear_thread_flag(TIF_RESTORE_SIGMASK);
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
@@ -654,13 +660,12 @@ static void do_signal(struct pt_regs *regs)
  * notification of userspace execution resumption
  * - triggered by the TIF_WORK_MASK flags
  */
-__attribute__((regparm(3)))
-void do_notify_resume(struct pt_regs *regs, void *_unused,
-		      __u32 thread_info_flags)
+void
+do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
 	/* Pending single-step? */
 	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= TF_MASK;
+		regs->flags |= X86_EFLAGS_TF;
 		clear_thread_flag(TIF_SINGLESTEP);
 	}
 
@@ -670,6 +675,6 @@ void do_notify_resume(struct pt_regs *regs, void *_unused,
 
 	if (thread_info_flags & _TIF_HRTICK_RESCHED)
 		hrtick_resched();
-	
+
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index 7347bb14e306..827179c5b32a 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -19,17 +19,28 @@
 #include <linux/stddef.h>
 #include <linux/personality.h>
 #include <linux/compiler.h>
+#include <asm/processor.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/i387.h>
 #include <asm/proto.h>
 #include <asm/ia32_unistd.h>
 #include <asm/mce.h>
-
-/* #define DEBUG_SIG 1 */
+#include "sigframe.h"
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+#define __FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
+			 X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+			 X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+			 X86_EFLAGS_CF)
+
+#ifdef CONFIG_X86_32
+# define FIX_EFLAGS	(__FIX_EFLAGS | X86_EFLAGS_RF)
+#else
+# define FIX_EFLAGS	__FIX_EFLAGS
+#endif
+
 int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
                sigset_t *set, struct pt_regs * regs); 
 int ia32_setup_frame(int sig, struct k_sigaction *ka,
@@ -46,16 +57,9 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 /*
  * Do a signal return; undo the signal stack.
  */
-
-struct rt_sigframe
-{
-	char __user *pretcode;
-	struct ucontext uc;
-	struct siginfo info;
-};
-
 static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned long *prax)
+restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
+		   unsigned long *pax)
 {
 	unsigned int err = 0;
 
@@ -87,7 +91,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned
 	{
 		unsigned int tmpflags;
 		err |= __get_user(tmpflags, &sc->flags);
-		regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+		regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
 		regs->orig_ax = -1;		/* disable syscall checks */
 	}
 
@@ -108,7 +112,7 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, unsigned
 		}
 	}
 
-	err |= __get_user(*prax, &sc->ax);
+	err |= __get_user(*pax, &sc->ax);
 	return err;
 
 badframe:
@@ -121,13 +125,11 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 	sigset_t set;
 	unsigned long ax;
 
-	frame = (struct rt_sigframe __user *)(regs->sp - 8);
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) {
+	frame = (struct rt_sigframe __user *)(regs->sp - sizeof(long));
+	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
 		goto badframe;
-	} 
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) { 
+	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
 		goto badframe;
-	} 
 
 	sigdelsetmask(&set, ~_BLOCKABLE);
 	spin_lock_irq(&current->sighand->siglock);
@@ -138,10 +140,6 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
 	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ax))
 		goto badframe;
 
-#ifdef DEBUG_SIG
-	printk("%d sigreturn ip:%lx sp:%lx frame:%p ax:%lx\n",current->pid,regs->ip,regs->sp,frame,ax);
-#endif
-
 	if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
 		goto badframe;
 
@@ -270,10 +268,6 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (err)
 		goto give_sigsegv;
 
-#ifdef DEBUG_SIG
-	printk("%d old ip %lx old sp %lx old ax %lx\n", current->pid,regs->ip,regs->sp,regs->ax);
-#endif
-
 	/* Set up registers for signal handler */
 	regs->di = sig;
 	/* In case the signal handler was declared without prototypes */ 
@@ -295,13 +289,9 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	   see include/asm-x86_64/uaccess.h for details. */
 	set_fs(USER_DS);
 
-	regs->flags &= ~X86_EFLAGS_TF;
+	regs->flags &= ~(X86_EFLAGS_TF | X86_EFLAGS_DF);
 	if (test_thread_flag(TIF_SINGLESTEP))
 		ptrace_notify(SIGTRAP);
-#ifdef DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%lx ra=%p\n",
-		current->comm, current->pid, frame, regs->ip, frame->pretcode);
-#endif
 
 	return 0;
 
@@ -311,40 +301,63 @@ give_sigsegv:
 }
 
 /*
+ * Return -1L or the syscall number that @regs is executing.
+ */
+static long current_syscall(struct pt_regs *regs)
+{
+	/*
+	 * We always sign-extend a -1 value being set here,
+	 * so this is always either -1L or a syscall number.
+	 */
+	return regs->orig_ax;
+}
+
+/*
+ * Return a value that is -EFOO if the system call in @regs->orig_ax
+ * returned an error.  This only works for @regs from @current.
+ */
+static long current_syscall_ret(struct pt_regs *regs)
+{
+#ifdef CONFIG_IA32_EMULATION
+	if (test_thread_flag(TIF_IA32))
+		/*
+		 * Sign-extend the value so (int)-EFOO becomes (long)-EFOO
+		 * and will match correctly in comparisons.
+		 */
+		return (int) regs->ax;
+#endif
+	return regs->ax;
+}
+
+/*
  * OK, we're invoking a handler
  */	
 
 static int
 handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-		sigset_t *oldset, struct pt_regs *regs)
+	      sigset_t *oldset, struct pt_regs *regs)
 {
 	int ret;
 
-#ifdef DEBUG_SIG
-	printk("handle_signal pid:%d sig:%lu ip:%lx sp:%lx regs=%p\n",
-		current->pid, sig,
-		regs->ip, regs->sp, regs);
-#endif
-
 	/* Are we from a system call? */
-	if ((long)regs->orig_ax >= 0) {
+	if (current_syscall(regs) >= 0) {
 		/* If so, check system call restarting.. */
-		switch (regs->ax) {
-		        case -ERESTART_RESTARTBLOCK:
-			case -ERESTARTNOHAND:
-				regs->ax = -EINTR;
-				break;
+		switch (current_syscall_ret(regs)) {
+		case -ERESTART_RESTARTBLOCK:
+		case -ERESTARTNOHAND:
+			regs->ax = -EINTR;
+			break;
 
-			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->ax = -EINTR;
-					break;
-				}
-				/* fallthrough */
-			case -ERESTARTNOINTR:
-				regs->ax = regs->orig_ax;
-				regs->ip -= 2;
+		case -ERESTARTSYS:
+			if (!(ka->sa.sa_flags & SA_RESTART)) {
+				regs->ax = -EINTR;
 				break;
+			}
+		/* fallthrough */
+		case -ERESTARTNOINTR:
+			regs->ax = regs->orig_ax;
+			regs->ip -= 2;
+			break;
 		}
 	}
 
@@ -391,10 +404,11 @@ static void do_signal(struct pt_regs *regs)
 	sigset_t *oldset;
 
 	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
+	 * We want the common case to go fast, which is why we may in certain
+	 * cases get here from kernel mode. Just return without doing anything
 	 * if so.
+	 * X86_32: vm86 regs switched out by assembly code before reaching
+	 * here, so testing against kernel CS suffices.
 	 */
 	if (!user_mode(regs))
 		return;
@@ -426,10 +440,9 @@ static void do_signal(struct pt_regs *regs)
 	}
 
 	/* Did we come from a system call? */
-	if ((long)regs->orig_ax >= 0) {
+	if (current_syscall(regs) >= 0) {
 		/* Restart the system call - no handlers present */
-		long res = regs->ax;
-		switch (res) {
+		switch (current_syscall_ret(regs)) {
 		case -ERESTARTNOHAND:
 		case -ERESTARTSYS:
 		case -ERESTARTNOINTR:
@@ -445,22 +458,19 @@ static void do_signal(struct pt_regs *regs)
 		}
 	}
 
-	/* if there's no signal to deliver, we just put the saved sigmask
-	   back. */
+	/*
+	 * If there's no signal to deliver, we just put the saved sigmask
+	 * back.
+	 */
 	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
 		clear_thread_flag(TIF_RESTORE_SIGMASK);
 		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 	}
 }
 
-void
-do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
+void do_notify_resume(struct pt_regs *regs, void *unused,
+		      __u32 thread_info_flags)
 {
-#ifdef DEBUG_SIG
-	printk("do_notify_resume flags:%x ip:%lx sp:%lx caller:%p pending:%x\n",
-	       thread_info_flags, regs->ip, regs->sp, __builtin_return_address(0),signal_pending(current));
-#endif
-	       
 	/* Pending single-step? */
 	if (thread_info_flags & _TIF_SINGLESTEP) {
 		regs->flags |= X86_EFLAGS_TF;
@@ -474,7 +484,7 @@ do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 #endif /* CONFIG_X86_MCE */
 
 	/* deal with pending signal delivery */
-	if (thread_info_flags & (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK))
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
 		do_signal(regs);
 
 	if (thread_info_flags & _TIF_HRTICK_RESCHED)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
new file mode 100644
index 000000000000..8f75893a6467
--- /dev/null
+++ b/arch/x86/kernel/smp.c
@@ -0,0 +1,343 @@
+/*
+ *	Intel SMP support routines.
+ *
+ *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
+ *      (c) 2002,2003 Andi Kleen, SuSE Labs.
+ *
+ *	i386 and x86_64 integration by Glauber Costa <gcosta@redhat.com>
+ *
+ *	This code is released under the GNU General Public License version 2 or
+ *	later.
+ */
+
+#include <linux/init.h>
+
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <linux/cpu.h>
+
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+#include <asm/proto.h>
+#include <mach_ipi.h>
+#include <mach_apic.h>
+/*
+ *	Some notes on x86 processor bugs affecting SMP operation:
+ *
+ *	Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
+ *	The Linux implications for SMP are handled as follows:
+ *
+ *	Pentium III / [Xeon]
+ *		None of the E1AP-E3AP errata are visible to the user.
+ *
+ *	E1AP.	see PII A1AP
+ *	E2AP.	see PII A2AP
+ *	E3AP.	see PII A3AP
+ *
+ *	Pentium II / [Xeon]
+ *		None of the A1AP-A3AP errata are visible to the user.
+ *
+ *	A1AP.	see PPro 1AP
+ *	A2AP.	see PPro 2AP
+ *	A3AP.	see PPro 7AP
+ *
+ *	Pentium Pro
+ *		None of 1AP-9AP errata are visible to the normal user,
+ *	except occasional delivery of 'spurious interrupt' as trap #15.
+ *	This is very rare and a non-problem.
+ *
+ *	1AP.	Linux maps APIC as non-cacheable
+ *	2AP.	worked around in hardware
+ *	3AP.	fixed in C0 and above steppings microcode update.
+ *		Linux does not use excessive STARTUP_IPIs.
+ *	4AP.	worked around in hardware
+ *	5AP.	symmetric IO mode (normal Linux operation) not affected.
+ *		'noapic' mode has vector 0xf filled out properly.
+ *	6AP.	'noapic' mode might be affected - fixed in later steppings
+ *	7AP.	We do not assume writes to the LVT deassering IRQs
+ *	8AP.	We do not enable low power mode (deep sleep) during MP bootup
+ *	9AP.	We do not use mixed mode
+ *
+ *	Pentium
+ *		There is a marginal case where REP MOVS on 100MHz SMP
+ *	machines with B stepping processors can fail. XXX should provide
+ *	an L1cache=Writethrough or L1cache=off option.
+ *
+ *		B stepping CPUs may hang. There are hardware work arounds
+ *	for this. We warn about it in case your board doesn't have the work
+ *	arounds. Basically that's so I can tell anyone with a B stepping
+ *	CPU and SMP problems "tough".
+ *
+ *	Specific items [From Pentium Processor Specification Update]
+ *
+ *	1AP.	Linux doesn't use remote read
+ *	2AP.	Linux doesn't trust APIC errors
+ *	3AP.	We work around this
+ *	4AP.	Linux never generated 3 interrupts of the same priority
+ *		to cause a lost local interrupt.
+ *	5AP.	Remote read is never used
+ *	6AP.	not affected - worked around in hardware
+ *	7AP.	not affected - worked around in hardware
+ *	8AP.	worked around in hardware - we get explicit CS errors if not
+ *	9AP.	only 'noapic' mode affected. Might generate spurious
+ *		interrupts, we log only the first one and count the
+ *		rest silently.
+ *	10AP.	not affected - worked around in hardware
+ *	11AP.	Linux reads the APIC between writes to avoid this, as per
+ *		the documentation. Make sure you preserve this as it affects
+ *		the C stepping chips too.
+ *	12AP.	not affected - worked around in hardware
+ *	13AP.	not affected - worked around in hardware
+ *	14AP.	we always deassert INIT during bootup
+ *	15AP.	not affected - worked around in hardware
+ *	16AP.	not affected - worked around in hardware
+ *	17AP.	not affected - worked around in hardware
+ *	18AP.	not affected - worked around in hardware
+ *	19AP.	not affected - worked around in BIOS
+ *
+ *	If this sounds worrying believe me these bugs are either ___RARE___,
+ *	or are signal timing bugs worked around in hardware and there's
+ *	about nothing of note with C stepping upwards.
+ */
+
+/*
+ * this function sends a 'reschedule' IPI to another CPU.
+ * it goes straight through and wastes no time serializing
+ * anything. Worst case is that we lose a reschedule ...
+ */
+static void native_smp_send_reschedule(int cpu)
+{
+	if (unlikely(cpu_is_offline(cpu))) {
+		WARN_ON(1);
+		return;
+	}
+	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
+}
+
+/*
+ * Structure and data for smp_call_function(). This is designed to minimise
+ * static memory requirements. It also looks cleaner.
+ */
+static DEFINE_SPINLOCK(call_lock);
+
+struct call_data_struct {
+	void (*func) (void *info);
+	void *info;
+	atomic_t started;
+	atomic_t finished;
+	int wait;
+};
+
+void lock_ipi_call_lock(void)
+{
+	spin_lock_irq(&call_lock);
+}
+
+void unlock_ipi_call_lock(void)
+{
+	spin_unlock_irq(&call_lock);
+}
+
+static struct call_data_struct *call_data;
+
+static void __smp_call_function(void (*func) (void *info), void *info,
+				int nonatomic, int wait)
+{
+	struct call_data_struct data;
+	int cpus = num_online_cpus() - 1;
+
+	if (!cpus)
+		return;
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	mb();
+
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (wait)
+		while (atomic_read(&data.finished) != cpus)
+			cpu_relax();
+}
+
+
+/**
+ * smp_call_function_mask(): Run a function on a set of other CPUs.
+ * @mask: The set of cpus to run on.  Must not include the current cpu.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+  * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+static int
+native_smp_call_function_mask(cpumask_t mask,
+			      void (*func)(void *), void *info,
+			      int wait)
+{
+	struct call_data_struct data;
+	cpumask_t allbutself;
+	int cpus;
+
+	/* Can deadlock when called with interrupts disabled */
+	WARN_ON(irqs_disabled());
+
+	/* Holding any lock stops cpus from going down. */
+	spin_lock(&call_lock);
+
+	allbutself = cpu_online_map;
+	cpu_clear(smp_processor_id(), allbutself);
+
+	cpus_and(mask, mask, allbutself);
+	cpus = cpus_weight(mask);
+
+	if (!cpus) {
+		spin_unlock(&call_lock);
+		return 0;
+	}
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	wmb();
+
+	/* Send a message to other CPUs */
+	if (cpus_equal(mask, allbutself))
+		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
+	else
+		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (wait)
+		while (atomic_read(&data.finished) != cpus)
+			cpu_relax();
+	spin_unlock(&call_lock);
+
+	return 0;
+}
+
+static void stop_this_cpu(void *dummy)
+{
+	local_irq_disable();
+	/*
+	 * Remove this CPU:
+	 */
+	cpu_clear(smp_processor_id(), cpu_online_map);
+	disable_local_APIC();
+	if (hlt_works(smp_processor_id()))
+		for (;;) halt();
+	for (;;);
+}
+
+/*
+ * this function calls the 'stop' function on all other CPUs in the system.
+ */
+
+static void native_smp_send_stop(void)
+{
+	int nolock;
+	unsigned long flags;
+
+	if (reboot_force)
+		return;
+
+	/* Don't deadlock on the call lock in panic */
+	nolock = !spin_trylock(&call_lock);
+	local_irq_save(flags);
+	__smp_call_function(stop_this_cpu, NULL, 0, 0);
+	if (!nolock)
+		spin_unlock(&call_lock);
+	disable_local_APIC();
+	local_irq_restore(flags);
+}
+
+/*
+ * Reschedule call back. Nothing to do,
+ * all the work is done automatically when
+ * we return from the interrupt.
+ */
+void smp_reschedule_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_resched_count++;
+#else
+	add_pda(irq_resched_count, 1);
+#endif
+}
+
+void smp_call_function_interrupt(struct pt_regs *regs)
+{
+	void (*func) (void *info) = call_data->func;
+	void *info = call_data->info;
+	int wait = call_data->wait;
+
+	ack_APIC_irq();
+	/*
+	 * Notify initiating CPU that I've grabbed the data and am
+	 * about to execute the function
+	 */
+	mb();
+	atomic_inc(&call_data->started);
+	/*
+	 * At this point the info structure may be out of scope unless wait==1
+	 */
+	irq_enter();
+	(*func)(info);
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
+	irq_exit();
+
+	if (wait) {
+		mb();
+		atomic_inc(&call_data->finished);
+	}
+}
+
+struct smp_ops smp_ops = {
+	.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
+	.smp_prepare_cpus = native_smp_prepare_cpus,
+	.cpu_up = native_cpu_up,
+	.smp_cpus_done = native_smp_cpus_done,
+
+	.smp_send_stop = native_smp_send_stop,
+	.smp_send_reschedule = native_smp_send_reschedule,
+	.smp_call_function_mask = native_smp_call_function_mask,
+};
+EXPORT_SYMBOL_GPL(smp_ops);
+
diff --git a/arch/x86/kernel/smp_32.c b/arch/x86/kernel/smp_32.c
deleted file mode 100644
index dc0cde9d16fb..000000000000
--- a/arch/x86/kernel/smp_32.c
+++ /dev/null
@@ -1,712 +0,0 @@
-/*
- *	Intel SMP support routines.
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
- *
- *	This code is released under the GNU General Public License version 2 or
- *	later.
- */
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/cache.h>
-#include <linux/interrupt.h>
-#include <linux/cpu.h>
-#include <linux/module.h>
-
-#include <asm/mtrr.h>
-#include <asm/tlbflush.h>
-#include <asm/mmu_context.h>
-#include <mach_apic.h>
-
-/*
- *	Some notes on x86 processor bugs affecting SMP operation:
- *
- *	Pentium, Pentium Pro, II, III (and all CPUs) have bugs.
- *	The Linux implications for SMP are handled as follows:
- *
- *	Pentium III / [Xeon]
- *		None of the E1AP-E3AP errata are visible to the user.
- *
- *	E1AP.	see PII A1AP
- *	E2AP.	see PII A2AP
- *	E3AP.	see PII A3AP
- *
- *	Pentium II / [Xeon]
- *		None of the A1AP-A3AP errata are visible to the user.
- *
- *	A1AP.	see PPro 1AP
- *	A2AP.	see PPro 2AP
- *	A3AP.	see PPro 7AP
- *
- *	Pentium Pro
- *		None of 1AP-9AP errata are visible to the normal user,
- *	except occasional delivery of 'spurious interrupt' as trap #15.
- *	This is very rare and a non-problem.
- *
- *	1AP.	Linux maps APIC as non-cacheable
- *	2AP.	worked around in hardware
- *	3AP.	fixed in C0 and above steppings microcode update.
- *		Linux does not use excessive STARTUP_IPIs.
- *	4AP.	worked around in hardware
- *	5AP.	symmetric IO mode (normal Linux operation) not affected.
- *		'noapic' mode has vector 0xf filled out properly.
- *	6AP.	'noapic' mode might be affected - fixed in later steppings
- *	7AP.	We do not assume writes to the LVT deassering IRQs
- *	8AP.	We do not enable low power mode (deep sleep) during MP bootup
- *	9AP.	We do not use mixed mode
- *
- *	Pentium
- *		There is a marginal case where REP MOVS on 100MHz SMP
- *	machines with B stepping processors can fail. XXX should provide
- *	an L1cache=Writethrough or L1cache=off option.
- *
- *		B stepping CPUs may hang. There are hardware work arounds
- *	for this. We warn about it in case your board doesn't have the work
- *	arounds. Basically that's so I can tell anyone with a B stepping
- *	CPU and SMP problems "tough".
- *
- *	Specific items [From Pentium Processor Specification Update]
- *
- *	1AP.	Linux doesn't use remote read
- *	2AP.	Linux doesn't trust APIC errors
- *	3AP.	We work around this
- *	4AP.	Linux never generated 3 interrupts of the same priority
- *		to cause a lost local interrupt.
- *	5AP.	Remote read is never used
- *	6AP.	not affected - worked around in hardware
- *	7AP.	not affected - worked around in hardware
- *	8AP.	worked around in hardware - we get explicit CS errors if not
- *	9AP.	only 'noapic' mode affected. Might generate spurious
- *		interrupts, we log only the first one and count the
- *		rest silently.
- *	10AP.	not affected - worked around in hardware
- *	11AP.	Linux reads the APIC between writes to avoid this, as per
- *		the documentation. Make sure you preserve this as it affects
- *		the C stepping chips too.
- *	12AP.	not affected - worked around in hardware
- *	13AP.	not affected - worked around in hardware
- *	14AP.	we always deassert INIT during bootup
- *	15AP.	not affected - worked around in hardware
- *	16AP.	not affected - worked around in hardware
- *	17AP.	not affected - worked around in hardware
- *	18AP.	not affected - worked around in hardware
- *	19AP.	not affected - worked around in BIOS
- *
- *	If this sounds worrying believe me these bugs are either ___RARE___,
- *	or are signal timing bugs worked around in hardware and there's
- *	about nothing of note with C stepping upwards.
- */
-
-DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) ____cacheline_aligned = { &init_mm, 0, };
-
-/*
- * the following functions deal with sending IPIs between CPUs.
- *
- * We use 'broadcast', CPU->CPU IPIs and self-IPIs too.
- */
-
-static inline int __prepare_ICR (unsigned int shortcut, int vector)
-{
-	unsigned int icr = shortcut | APIC_DEST_LOGICAL;
-
-	switch (vector) {
-	default:
-		icr |= APIC_DM_FIXED | vector;
-		break;
-	case NMI_VECTOR:
-		icr |= APIC_DM_NMI;
-		break;
-	}
-	return icr;
-}
-
-static inline int __prepare_ICR2 (unsigned int mask)
-{
-	return SET_APIC_DEST_FIELD(mask);
-}
-
-void __send_IPI_shortcut(unsigned int shortcut, int vector)
-{
-	/*
-	 * Subtle. In the case of the 'never do double writes' workaround
-	 * we have to lock out interrupts to be safe.  As we don't care
-	 * of the value read we use an atomic rmw access to avoid costly
-	 * cli/sti.  Otherwise we use an even cheaper single atomic write
-	 * to the APIC.
-	 */
-	unsigned int cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	apic_wait_icr_idle();
-
-	/*
-	 * No need to touch the target chip field
-	 */
-	cfg = __prepare_ICR(shortcut, vector);
-
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write_around(APIC_ICR, cfg);
-}
-
-void send_IPI_self(int vector)
-{
-	__send_IPI_shortcut(APIC_DEST_SELF, vector);
-}
-
-/*
- * This is used to send an IPI with no shorthand notation (the destination is
- * specified in bits 56 to 63 of the ICR).
- */
-static inline void __send_IPI_dest_field(unsigned long mask, int vector)
-{
-	unsigned long cfg;
-
-	/*
-	 * Wait for idle.
-	 */
-	if (unlikely(vector == NMI_VECTOR))
-		safe_apic_wait_icr_idle();
-	else
-		apic_wait_icr_idle();
-		
-	/*
-	 * prepare target chip field
-	 */
-	cfg = __prepare_ICR2(mask);
-	apic_write_around(APIC_ICR2, cfg);
-		
-	/*
-	 * program the ICR 
-	 */
-	cfg = __prepare_ICR(0, vector);
-			
-	/*
-	 * Send the IPI. The write to APIC_ICR fires this off.
-	 */
-	apic_write_around(APIC_ICR, cfg);
-}
-
-/*
- * This is only used on smaller machines.
- */
-void send_IPI_mask_bitmask(cpumask_t cpumask, int vector)
-{
-	unsigned long mask = cpus_addr(cpumask)[0];
-	unsigned long flags;
-
-	local_irq_save(flags);
-	WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]);
-	__send_IPI_dest_field(mask, vector);
-	local_irq_restore(flags);
-}
-
-void send_IPI_mask_sequence(cpumask_t mask, int vector)
-{
-	unsigned long flags;
-	unsigned int query_cpu;
-
-	/*
-	 * Hack. The clustered APIC addressing mode doesn't allow us to send 
-	 * to an arbitrary mask, so I do a unicasts to each CPU instead. This 
-	 * should be modified to do 1 message per cluster ID - mbligh
-	 */ 
-
-	local_irq_save(flags);
-	for_each_possible_cpu(query_cpu) {
-		if (cpu_isset(query_cpu, mask)) {
-			__send_IPI_dest_field(cpu_to_logical_apicid(query_cpu),
-					      vector);
-		}
-	}
-	local_irq_restore(flags);
-}
-
-#include <mach_ipi.h> /* must come after the send_IPI functions above for inlining */
-
-/*
- *	Smarter SMP flushing macros. 
- *		c/o Linus Torvalds.
- *
- *	These mean you can really definitely utterly forget about
- *	writing to user space from interrupts. (Its not allowed anyway).
- *
- *	Optimizations Manfred Spraul <manfred@colorfullife.com>
- */
-
-static cpumask_t flush_cpumask;
-static struct mm_struct * flush_mm;
-static unsigned long flush_va;
-static DEFINE_SPINLOCK(tlbstate_lock);
-
-/*
- * We cannot call mmdrop() because we are in interrupt context,
- * instead update mm->cpu_vm_mask.
- *
- * We need to reload %cr3 since the page tables may be going
- * away from under us..
- */
-void leave_mm(int cpu)
-{
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
-		BUG();
-	cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
-	load_cr3(swapper_pg_dir);
-}
-EXPORT_SYMBOL_GPL(leave_mm);
-
-/*
- *
- * The flush IPI assumes that a thread switch happens in this order:
- * [cpu0: the cpu that switches]
- * 1) switch_mm() either 1a) or 1b)
- * 1a) thread switch to a different mm
- * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
- * 	Stop ipi delivery for the old mm. This is not synchronized with
- * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
- * 	for the wrong mm, and in the worst case we perform a superfluous
- * 	tlb flush.
- * 1a2) set cpu_tlbstate to TLBSTATE_OK
- * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
- *	was in lazy tlb mode.
- * 1a3) update cpu_tlbstate[].active_mm
- * 	Now cpu0 accepts tlb flushes for the new mm.
- * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
- * 	Now the other cpus will send tlb flush ipis.
- * 1a4) change cr3.
- * 1b) thread switch without mm change
- *	cpu_tlbstate[].active_mm is correct, cpu0 already handles
- *	flush ipis.
- * 1b1) set cpu_tlbstate to TLBSTATE_OK
- * 1b2) test_and_set the cpu bit in cpu_vm_mask.
- * 	Atomically set the bit [other cpus will start sending flush ipis],
- * 	and test the bit.
- * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
- * 2) switch %%esp, ie current
- *
- * The interrupt must handle 2 special cases:
- * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
- * - the cpu performs speculative tlb reads, i.e. even if the cpu only
- *   runs in kernel space, the cpu could load tlb entries for user space
- *   pages.
- *
- * The good news is that cpu_tlbstate is local to each cpu, no
- * write/read ordering problems.
- */
-
-/*
- * TLB flush IPI:
- *
- * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
- * 2) Leave the mm if we are in the lazy tlb mode.
- */
-
-void smp_invalidate_interrupt(struct pt_regs *regs)
-{
-	unsigned long cpu;
-
-	cpu = get_cpu();
-
-	if (!cpu_isset(cpu, flush_cpumask))
-		goto out;
-		/* 
-		 * This was a BUG() but until someone can quote me the
-		 * line from the intel manual that guarantees an IPI to
-		 * multiple CPUs is retried _only_ on the erroring CPUs
-		 * its staying as a return
-		 *
-		 * BUG();
-		 */
-		 
-	if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
-		if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
-			if (flush_va == TLB_FLUSH_ALL)
-				local_flush_tlb();
-			else
-				__flush_tlb_one(flush_va);
-		} else
-			leave_mm(cpu);
-	}
-	ack_APIC_irq();
-	smp_mb__before_clear_bit();
-	cpu_clear(cpu, flush_cpumask);
-	smp_mb__after_clear_bit();
-out:
-	put_cpu_no_resched();
-	__get_cpu_var(irq_stat).irq_tlb_count++;
-}
-
-void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
-			     unsigned long va)
-{
-	cpumask_t cpumask = *cpumaskp;
-
-	/*
-	 * A couple of (to be removed) sanity checks:
-	 *
-	 * - current CPU must not be in mask
-	 * - mask must exist :)
-	 */
-	BUG_ON(cpus_empty(cpumask));
-	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
-	BUG_ON(!mm);
-
-#ifdef CONFIG_HOTPLUG_CPU
-	/* If a CPU which we ran on has gone down, OK. */
-	cpus_and(cpumask, cpumask, cpu_online_map);
-	if (unlikely(cpus_empty(cpumask)))
-		return;
-#endif
-
-	/*
-	 * i'm not happy about this global shared spinlock in the
-	 * MM hot path, but we'll see how contended it is.
-	 * AK: x86-64 has a faster method that could be ported.
-	 */
-	spin_lock(&tlbstate_lock);
-	
-	flush_mm = mm;
-	flush_va = va;
-	cpus_or(flush_cpumask, cpumask, flush_cpumask);
-	/*
-	 * We have to send the IPI only to
-	 * CPUs affected.
-	 */
-	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
-
-	while (!cpus_empty(flush_cpumask))
-		/* nothing. lockup detection does not belong here */
-		cpu_relax();
-
-	flush_mm = NULL;
-	flush_va = 0;
-	spin_unlock(&tlbstate_lock);
-}
-	
-void flush_tlb_current_task(void)
-{
-	struct mm_struct *mm = current->mm;
-	cpumask_t cpu_mask;
-
-	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
-
-	local_flush_tlb();
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-	preempt_enable();
-}
-
-void flush_tlb_mm (struct mm_struct * mm)
-{
-	cpumask_t cpu_mask;
-
-	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
-
-	if (current->active_mm == mm) {
-		if (current->mm)
-			local_flush_tlb();
-		else
-			leave_mm(smp_processor_id());
-	}
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
-
-	preempt_enable();
-}
-
-void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
-{
-	struct mm_struct *mm = vma->vm_mm;
-	cpumask_t cpu_mask;
-
-	preempt_disable();
-	cpu_mask = mm->cpu_vm_mask;
-	cpu_clear(smp_processor_id(), cpu_mask);
-
-	if (current->active_mm == mm) {
-		if(current->mm)
-			__flush_tlb_one(va);
-		 else
-		 	leave_mm(smp_processor_id());
-	}
-
-	if (!cpus_empty(cpu_mask))
-		flush_tlb_others(cpu_mask, mm, va);
-
-	preempt_enable();
-}
-EXPORT_SYMBOL(flush_tlb_page);
-
-static void do_flush_tlb_all(void* info)
-{
-	unsigned long cpu = smp_processor_id();
-
-	__flush_tlb_all();
-	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
-		leave_mm(cpu);
-}
-
-void flush_tlb_all(void)
-{
-	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
-}
-
-/*
- * this function sends a 'reschedule' IPI to another CPU.
- * it goes straight through and wastes no time serializing
- * anything. Worst case is that we lose a reschedule ...
- */
-static void native_smp_send_reschedule(int cpu)
-{
-	WARN_ON(cpu_is_offline(cpu));
-	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
-
-void lock_ipi_call_lock(void)
-{
-	spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-static struct call_data_struct *call_data;
-
-static void __smp_call_function(void (*func) (void *info), void *info,
-				int nonatomic, int wait)
-{
-	struct call_data_struct data;
-	int cpus = num_online_cpus() - 1;
-
-	if (!cpus)
-		return;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();
-	
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-}
-
-
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * @mask: The set of cpus to run on.  Must not include the current cpu.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
-  * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int
-native_smp_call_function_mask(cpumask_t mask,
-			      void (*func)(void *), void *info,
-			      int wait)
-{
-	struct call_data_struct data;
-	cpumask_t allbutself;
-	int cpus;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
-
-	allbutself = cpu_online_map;
-	cpu_clear(smp_processor_id(), allbutself);
-
-	cpus_and(mask, mask, allbutself);
-	cpus = cpus_weight(mask);
-
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();
-
-	/* Send a message to other CPUs */
-	if (cpus_equal(mask, allbutself))
-		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-	else
-		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	spin_unlock(&call_lock);
-
-	return 0;
-}
-
-static void stop_this_cpu (void * dummy)
-{
-	local_irq_disable();
-	/*
-	 * Remove this CPU:
-	 */
-	cpu_clear(smp_processor_id(), cpu_online_map);
-	disable_local_APIC();
-	if (cpu_data(smp_processor_id()).hlt_works_ok)
-		for(;;) halt();
-	for (;;);
-}
-
-/*
- * this function calls the 'stop' function on all other CPUs in the system.
- */
-
-static void native_smp_send_stop(void)
-{
-	/* Don't deadlock on the call lock in panic */
-	int nolock = !spin_trylock(&call_lock);
-	unsigned long flags;
-
-	local_irq_save(flags);
-	__smp_call_function(stop_this_cpu, NULL, 0, 0);
-	if (!nolock)
-		spin_unlock(&call_lock);
-	disable_local_APIC();
-	local_irq_restore(flags);
-}
-
-/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
- */
-void smp_reschedule_interrupt(struct pt_regs *regs)
-{
-	ack_APIC_irq();
-	__get_cpu_var(irq_stat).irq_resched_count++;
-}
-
-void smp_call_function_interrupt(struct pt_regs *regs)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	ack_APIC_irq();
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	irq_enter();
-	(*func)(info);
-	__get_cpu_var(irq_stat).irq_call_count++;
-	irq_exit();
-
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
-}
-
-static int convert_apicid_to_cpu(int apic_id)
-{
-	int i;
-
-	for_each_possible_cpu(i) {
-		if (per_cpu(x86_cpu_to_apicid, i) == apic_id)
-			return i;
-	}
-	return -1;
-}
-
-int safe_smp_processor_id(void)
-{
-	int apicid, cpuid;
-
-	if (!boot_cpu_has(X86_FEATURE_APIC))
-		return 0;
-
-	apicid = hard_smp_processor_id();
-	if (apicid == BAD_APICID)
-		return 0;
-
-	cpuid = convert_apicid_to_cpu(apicid);
-
-	return cpuid >= 0 ? cpuid : 0;
-}
-
-struct smp_ops smp_ops = {
-	.smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = native_smp_prepare_cpus,
-	.cpu_up = native_cpu_up,
-	.smp_cpus_done = native_smp_cpus_done,
-
-	.smp_send_stop = native_smp_send_stop,
-	.smp_send_reschedule = native_smp_send_reschedule,
-	.smp_call_function_mask = native_smp_call_function_mask,
-};
-EXPORT_SYMBOL_GPL(smp_ops);
diff --git a/arch/x86/kernel/smpboot_32.c b/arch/x86/kernel/smpboot.c
index 579b9b740c7c..6a925394bc7e 100644
--- a/arch/x86/kernel/smpboot_32.c
+++ b/arch/x86/kernel/smpboot.c
@@ -3,6 +3,7 @@
  *
  *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
  *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *	Copyright 2001 Andi Kleen, SuSE Labs.
  *
  *	Much of the core SMP work is based on previous work by Thomas Radke, to
  *	whom a great many thanks are extended.
@@ -29,53 +30,91 @@
  *		Ingo Molnar	:	various cleanups and rewrites
  *		Tigran Aivazian	:	fixed "0.00 in /proc/uptime on SMP" bug.
  *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs
+ *	Andi Kleen		:	Changed for SMP boot into long mode.
  *		Martin J. Bligh	: 	Added support for multi-quad systems
  *		Dave Jones	:	Report invalid combinations of Athlon CPUs.
-*		Rusty Russell	:	Hacked into shape for new "hotplug" boot process. */
+ *		Rusty Russell	:	Hacked into shape for new "hotplug" boot process.
+ *      Andi Kleen              :       Converted to new state machine.
+ *	Ashok Raj		: 	CPU hotplug support
+ *	Glauber Costa		:	i386 and x86_64 integration
+ */
 
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/module.h>
 #include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/bootmem.h>
-#include <linux/notifier.h>
-#include <linux/cpu.h>
 #include <linux/percpu.h>
+#include <linux/bootmem.h>
+#include <linux/err.h>
 #include <linux/nmi.h>
 
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <asm/tlbflush.h>
+#include <asm/acpi.h>
 #include <asm/desc.h>
-#include <asm/arch_hooks.h>
 #include <asm/nmi.h>
+#include <asm/irq.h>
+#include <asm/smp.h>
+#include <asm/trampoline.h>
+#include <asm/cpu.h>
+#include <asm/numa.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+#include <asm/mtrr.h>
+#include <asm/nmi.h>
+#include <asm/vmi.h>
+#include <asm/genapic.h>
+#include <linux/mc146818rtc.h>
 
 #include <mach_apic.h>
 #include <mach_wakecpu.h>
 #include <smpboot_hooks.h>
-#include <asm/vmi.h>
-#include <asm/mtrr.h>
 
-/* Set if we find a B stepping CPU */
-static int __cpuinitdata smp_b_stepping;
+/*
+ * FIXME: For x86_64, those are defined in other files. But moving them here,
+ * would make the setup areas dependent on smp, which is a loss. When we
+ * integrate apic between arches, we can probably do a better job, but
+ * right now, they'll stay here -- glommer
+ */
+
+/* which logical CPU number maps to which CPU (physical APIC ID) */
+u16 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
+			{ [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_cpu_to_apicid_early_ptr;
+
+u16 x86_bios_cpu_apicid_init[NR_CPUS] __initdata
+				= { [0 ... NR_CPUS-1] = BAD_APICID };
+void *x86_bios_cpu_apicid_early_ptr;
+
+#ifdef CONFIG_X86_32
+u8 apicid_2_node[MAX_APICID];
+#endif
+
+/* State of each CPU */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
+
+/* Store all idle threads, this can be reused instead of creating
+* a new thread. Also avoids complicated thread destroy functionality
+* for idle threads.
+*/
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
+ * removed after init for !CONFIG_HOTPLUG_CPU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
+#define get_idle_for_cpu(x)      (per_cpu(idle_thread_array, x))
+#define set_idle_for_cpu(x, p)   (per_cpu(idle_thread_array, x) = (p))
+#else
+struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
+#define get_idle_for_cpu(x)      (idle_thread_array[(x)])
+#define set_idle_for_cpu(x, p)   (idle_thread_array[(x)] = (p))
+#endif
 
 /* Number of siblings per CPU package */
 int smp_num_siblings = 1;
 EXPORT_SYMBOL(smp_num_siblings);
 
 /* Last level cache ID of each logical CPU */
-DEFINE_PER_CPU(u8, cpu_llc_id) = BAD_APICID;
-
-/* representing HT siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
-EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
-EXPORT_PER_CPU_SYMBOL(cpu_core_map);
+DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID;
 
 /* bitmap of online cpus */
 cpumask_t cpu_online_map __read_mostly;
@@ -85,126 +124,94 @@ cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 cpumask_t cpu_possible_map;
 EXPORT_SYMBOL(cpu_possible_map);
-static cpumask_t smp_commenced_mask;
+
+/* representing HT siblings of each logical CPU */
+DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+
+/* representing HT and core siblings of each logical CPU */
+DEFINE_PER_CPU(cpumask_t, cpu_core_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* Per CPU bogomips and other parameters */
 DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
 EXPORT_PER_CPU_SYMBOL(cpu_info);
 
-/* which logical CPU number maps to which CPU (physical APIC ID) */
-u8 x86_cpu_to_apicid_init[NR_CPUS] __initdata =
-			{ [0 ... NR_CPUS-1] = BAD_APICID };
-void *x86_cpu_to_apicid_early_ptr;
-DEFINE_PER_CPU(u8, x86_cpu_to_apicid) = BAD_APICID;
-EXPORT_PER_CPU_SYMBOL(x86_cpu_to_apicid);
-
-u8 apicid_2_node[MAX_APICID];
+static atomic_t init_deasserted;
 
-/*
- * Trampoline 80x86 program as an array.
- */
+static int boot_cpu_logical_apicid;
 
-extern const unsigned char trampoline_data [];
-extern const unsigned char trampoline_end  [];
-static unsigned char *trampoline_base;
+/* representing cpus for which sibling maps can be computed */
+static cpumask_t cpu_sibling_setup_map;
 
-static void map_cpu_to_logical_apicid(void);
+/* Set if we find a B stepping CPU */
+int __cpuinitdata smp_b_stepping;
 
-/* State of each CPU. */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
+#if defined(CONFIG_NUMA) && defined(CONFIG_X86_32)
 
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
+/* which logical CPUs are on which nodes */
+cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly =
+				{ [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
+EXPORT_SYMBOL(node_to_cpumask_map);
+/* which node each logical CPU is on */
+int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
+EXPORT_SYMBOL(cpu_to_node_map);
 
-static unsigned long __cpuinit setup_trampoline(void)
+/* set up a mapping between cpu and node. */
+static void map_cpu_to_node(int cpu, int node)
 {
-	memcpy(trampoline_base, trampoline_data, trampoline_end - trampoline_data);
-	return virt_to_phys(trampoline_base);
+	printk(KERN_INFO "Mapping cpu %d to node %d\n", cpu, node);
+	cpu_set(cpu, node_to_cpumask_map[node]);
+	cpu_to_node_map[cpu] = node;
 }
 
-/*
- * We are called very early to get the low memory for the
- * SMP bootup trampoline page.
- */
-void __init smp_alloc_memory(void)
+/* undo a mapping between cpu and node. */
+static void unmap_cpu_to_node(int cpu)
 {
-	trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
-	/*
-	 * Has to be in very low memory so we can execute
-	 * real-mode AP code.
-	 */
-	if (__pa(trampoline_base) >= 0x9F000)
-		BUG();
+	int node;
+
+	printk(KERN_INFO "Unmapping cpu %d from all nodes\n", cpu);
+	for (node = 0; node < MAX_NUMNODES; node++)
+		cpu_clear(cpu, node_to_cpumask_map[node]);
+	cpu_to_node_map[cpu] = 0;
 }
+#else /* !(CONFIG_NUMA && CONFIG_X86_32) */
+#define map_cpu_to_node(cpu, node)	({})
+#define unmap_cpu_to_node(cpu)	({})
+#endif
 
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
+#ifdef CONFIG_X86_32
+u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly =
+					{ [0 ... NR_CPUS-1] = BAD_APICID };
 
-void __cpuinit smp_store_cpu_info(int id)
+void map_cpu_to_logical_apicid(void)
 {
-	struct cpuinfo_x86 *c = &cpu_data(id);
-
-	*c = boot_cpu_data;
-	c->cpu_index = id;
-	if (id!=0)
-		identify_secondary_cpu(c);
-	/*
-	 * Mask B, Pentium, but not Pentium MMX
-	 */
-	if (c->x86_vendor == X86_VENDOR_INTEL &&
-	    c->x86 == 5 &&
-	    c->x86_mask >= 1 && c->x86_mask <= 4 &&
-	    c->x86_model <= 3)
-		/*
-		 * Remember we have B step Pentia with bugs
-		 */
-		smp_b_stepping = 1;
-
-	/*
-	 * Certain Athlons might work (for various values of 'work') in SMP
-	 * but they are not certified as MP capable.
-	 */
-	if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
-
-		if (num_possible_cpus() == 1)
-			goto valid_k7;
-
-		/* Athlon 660/661 is valid. */	
-		if ((c->x86_model==6) && ((c->x86_mask==0) || (c->x86_mask==1)))
-			goto valid_k7;
-
-		/* Duron 670 is valid */
-		if ((c->x86_model==7) && (c->x86_mask==0))
-			goto valid_k7;
-
-		/*
-		 * Athlon 662, Duron 671, and Athlon >model 7 have capability bit.
-		 * It's worth noting that the A5 stepping (662) of some Athlon XP's
-		 * have the MP bit set.
-		 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for more.
-		 */
-		if (((c->x86_model==6) && (c->x86_mask>=2)) ||
-		    ((c->x86_model==7) && (c->x86_mask>=1)) ||
-		     (c->x86_model> 7))
-			if (cpu_has_mp)
-				goto valid_k7;
+	int cpu = smp_processor_id();
+	int apicid = logical_smp_processor_id();
+	int node = apicid_to_node(apicid);
 
-		/* If we get here, it's not a certified SMP capable AMD system. */
-		add_taint(TAINT_UNSAFE_SMP);
-	}
+	if (!node_online(node))
+		node = first_online_node;
 
-valid_k7:
-	;
+	cpu_2_logical_apicid[cpu] = apicid;
+	map_cpu_to_node(cpu, node);
 }
 
-static atomic_t init_deasserted;
+void unmap_cpu_to_logical_apicid(int cpu)
+{
+	cpu_2_logical_apicid[cpu] = BAD_APICID;
+	unmap_cpu_to_node(cpu);
+}
+#else
+#define unmap_cpu_to_logical_apicid(cpu) do {} while (0)
+#define map_cpu_to_logical_apicid()  do {} while (0)
+#endif
 
-static void __cpuinit smp_callin(void)
+/*
+ * Report back to the Boot Processor.
+ * Running on AP.
+ */
+void __cpuinit smp_callin(void)
 {
 	int cpuid, phys_id;
 	unsigned long timeout;
@@ -220,12 +227,11 @@ static void __cpuinit smp_callin(void)
 	/*
 	 * (This works even if the APIC is not enabled.)
 	 */
-	phys_id = GET_APIC_ID(apic_read(APIC_ID));
+	phys_id = GET_APIC_ID(read_apic_id());
 	cpuid = smp_processor_id();
 	if (cpu_isset(cpuid, cpu_callin_map)) {
-		printk("huh, phys CPU#%d, CPU#%d already present??\n",
+		panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
 					phys_id, cpuid);
-		BUG();
 	}
 	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
 
@@ -247,13 +253,12 @@ static void __cpuinit smp_callin(void)
 		 */
 		if (cpu_isset(cpuid, cpu_callout_map))
 			break;
-		rep_nop();
+		cpu_relax();
 	}
 
 	if (!time_before(jiffies, timeout)) {
-		printk("BUG: CPU%d started up but did not get a callout!\n",
-			cpuid);
-		BUG();
+		panic("%s: CPU%d started up but did not get a callout!\n",
+		      __func__, cpuid);
 	}
 
 	/*
@@ -266,13 +271,19 @@ static void __cpuinit smp_callin(void)
 	Dprintk("CALLIN, before setup_local_APIC().\n");
 	smp_callin_clear_local_apic();
 	setup_local_APIC();
+	end_local_APIC_setup();
 	map_cpu_to_logical_apicid();
 
 	/*
 	 * Get our bogomips.
+	 *
+	 * Need to enable IRQs because it can take longer and then
+	 * the NMI watchdog might kill us.
 	 */
+	local_irq_enable();
 	calibrate_delay();
-	Dprintk("Stack at about %p\n",&cpuid);
+	local_irq_disable();
+	Dprintk("Stack at about %p\n", &cpuid);
 
 	/*
 	 * Save our processor parameters
@@ -285,91 +296,10 @@ static void __cpuinit smp_callin(void)
 	cpu_set(cpuid, cpu_callin_map);
 }
 
-static int cpucount;
-
-/* maps the cpu to the sched domain representing multi-core */
-cpumask_t cpu_coregroup_map(int cpu)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	/*
-	 * For perf, we return last level cache shared map.
-	 * And for power savings, we return cpu_core_map
-	 */
-	if (sched_mc_power_savings || sched_smt_power_savings)
-		return per_cpu(cpu_core_map, cpu);
-	else
-		return c->llc_shared_map;
-}
-
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
-
-void __cpuinit set_cpu_sibling_map(int cpu)
-{
-	int i;
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
-	cpu_set(cpu, cpu_sibling_setup_map);
-
-	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
-			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
-			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
-				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
-				cpu_set(cpu, per_cpu(cpu_sibling_map, i));
-				cpu_set(i, per_cpu(cpu_core_map, cpu));
-				cpu_set(cpu, per_cpu(cpu_core_map, i));
-				cpu_set(i, c->llc_shared_map);
-				cpu_set(cpu, cpu_data(i).llc_shared_map);
-			}
-		}
-	} else {
-		cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
-	}
-
-	cpu_set(cpu, c->llc_shared_map);
-
-	if (current_cpu_data.x86_max_cores == 1) {
-		per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu);
-		c->booted_cores = 1;
-		return;
-	}
-
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
-		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
-		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
-			cpu_set(i, c->llc_shared_map);
-			cpu_set(cpu, cpu_data(i).llc_shared_map);
-		}
-		if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
-			cpu_set(i, per_cpu(cpu_core_map, cpu));
-			cpu_set(cpu, per_cpu(cpu_core_map, i));
-			/*
-			 *  Does this new cpu bringup a new core?
-			 */
-			if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) {
-				/*
-				 * for each core in package, increment
-				 * the booted_cores for this new cpu
-				 */
-				if (first_cpu(per_cpu(cpu_sibling_map, i)) == i)
-					c->booted_cores++;
-				/*
-				 * increment the core count for all
-				 * the other cpus in this package
-				 */
-				if (i != cpu)
-					cpu_data(i).booted_cores++;
-			} else if (i != cpu && !c->booted_cores)
-				c->booted_cores = cpu_data(i).booted_cores;
-		}
-	}
-}
-
 /*
  * Activate a secondary processor.
  */
-static void __cpuinit start_secondary(void *unused)
+void __cpuinit start_secondary(void *unused)
 {
 	/*
 	 * Don't put *anything* before cpu_init(), SMP booting is too
@@ -382,24 +312,19 @@ static void __cpuinit start_secondary(void *unused)
 	cpu_init();
 	preempt_disable();
 	smp_callin();
-	while (!cpu_isset(smp_processor_id(), smp_commenced_mask))
-		rep_nop();
+
+	/* otherwise gcc will move up smp_processor_id before the cpu_init */
+	barrier();
 	/*
 	 * Check TSC synchronization with the BP:
 	 */
 	check_tsc_sync_target();
 
-	setup_secondary_clock();
 	if (nmi_watchdog == NMI_IO_APIC) {
 		disable_8259A_irq(0);
 		enable_NMI_through_LVT0();
 		enable_8259A_irq(0);
 	}
-	/*
-	 * low-memory mappings have been cleared, flush them from
-	 * the local TLBs too.
-	 */
-	local_flush_tlb();
 
 	/* This must be done before setting cpu_online_map */
 	set_cpu_sibling_map(raw_smp_processor_id());
@@ -414,17 +339,27 @@ static void __cpuinit start_secondary(void *unused)
 	 * smp_call_function().
 	 */
 	lock_ipi_call_lock();
+#ifdef CONFIG_X86_64
+	spin_lock(&vector_lock);
+
+	/* Setup the per cpu irq handling data structures */
+	__setup_vector_irq(smp_processor_id());
+	/*
+	 * Allow the master to continue.
+	 */
+	spin_unlock(&vector_lock);
+#endif
 	cpu_set(smp_processor_id(), cpu_online_map);
 	unlock_ipi_call_lock();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
-	/* We can take interrupts now: we're officially "up". */
-	local_irq_enable();
+	setup_secondary_clock();
 
 	wmb();
 	cpu_idle();
 }
 
+#ifdef CONFIG_X86_32
 /*
  * Everything has been set up for the secondary
  * CPUs - they just need to reload everything
@@ -442,89 +377,233 @@ void __devinit initialize_secondary(void)
 		"movl %0,%%esp\n\t"
 		"jmp *%1"
 		:
-		:"m" (current->thread.sp),"m" (current->thread.ip));
+		:"m" (current->thread.sp), "m" (current->thread.ip));
 }
+#endif
 
-/* Static state in head.S used to set up a CPU */
-extern struct {
-	void * sp;
-	unsigned short ss;
-} stack_start;
+static void __cpuinit smp_apply_quirks(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_X86_32
+	/*
+	 * Mask B, Pentium, but not Pentium MMX
+	 */
+	if (c->x86_vendor == X86_VENDOR_INTEL &&
+	    c->x86 == 5 &&
+	    c->x86_mask >= 1 && c->x86_mask <= 4 &&
+	    c->x86_model <= 3)
+		/*
+		 * Remember we have B step Pentia with bugs
+		 */
+		smp_b_stepping = 1;
 
-#ifdef CONFIG_NUMA
+	/*
+	 * Certain Athlons might work (for various values of 'work') in SMP
+	 * but they are not certified as MP capable.
+	 */
+	if ((c->x86_vendor == X86_VENDOR_AMD) && (c->x86 == 6)) {
 
-/* which logical CPUs are on which nodes */
-cpumask_t node_to_cpumask_map[MAX_NUMNODES] __read_mostly =
-				{ [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
-EXPORT_SYMBOL(node_to_cpumask_map);
-/* which node each logical CPU is on */
-int cpu_to_node_map[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
-EXPORT_SYMBOL(cpu_to_node_map);
+		if (num_possible_cpus() == 1)
+			goto valid_k7;
 
-/* set up a mapping between cpu and node. */
-static inline void map_cpu_to_node(int cpu, int node)
-{
-	printk("Mapping cpu %d to node %d\n", cpu, node);
-	cpu_set(cpu, node_to_cpumask_map[node]);
-	cpu_to_node_map[cpu] = node;
+		/* Athlon 660/661 is valid. */
+		if ((c->x86_model == 6) && ((c->x86_mask == 0) ||
+		    (c->x86_mask == 1)))
+			goto valid_k7;
+
+		/* Duron 670 is valid */
+		if ((c->x86_model == 7) && (c->x86_mask == 0))
+			goto valid_k7;
+
+		/*
+		 * Athlon 662, Duron 671, and Athlon >model 7 have capability
+		 * bit. It's worth noting that the A5 stepping (662) of some
+		 * Athlon XP's have the MP bit set.
+		 * See http://www.heise.de/newsticker/data/jow-18.10.01-000 for
+		 * more.
+		 */
+		if (((c->x86_model == 6) && (c->x86_mask >= 2)) ||
+		    ((c->x86_model == 7) && (c->x86_mask >= 1)) ||
+		     (c->x86_model > 7))
+			if (cpu_has_mp)
+				goto valid_k7;
+
+		/* If we get here, not a certified SMP capable AMD system. */
+		add_taint(TAINT_UNSAFE_SMP);
+	}
+
+valid_k7:
+	;
+#endif
 }
 
-/* undo a mapping between cpu and node. */
-static inline void unmap_cpu_to_node(int cpu)
+void __cpuinit smp_checks(void)
 {
-	int node;
+	if (smp_b_stepping)
+		printk(KERN_WARNING "WARNING: SMP operation may be unreliable"
+				    "with B stepping processors.\n");
 
-	printk("Unmapping cpu %d from all nodes\n", cpu);
-	for (node = 0; node < MAX_NUMNODES; node ++)
-		cpu_clear(cpu, node_to_cpumask_map[node]);
-	cpu_to_node_map[cpu] = 0;
+	/*
+	 * Don't taint if we are running SMP kernel on a single non-MP
+	 * approved Athlon
+	 */
+	if (tainted & TAINT_UNSAFE_SMP) {
+		if (num_online_cpus())
+			printk(KERN_INFO "WARNING: This combination of AMD"
+				"processors is not suitable for SMP.\n");
+		else
+			tainted &= ~TAINT_UNSAFE_SMP;
+	}
 }
-#else /* !CONFIG_NUMA */
 
-#define map_cpu_to_node(cpu, node)	({})
-#define unmap_cpu_to_node(cpu)	({})
+/*
+ * The bootstrap kernel entry code has set these up. Save them for
+ * a given CPU
+ */
 
-#endif /* CONFIG_NUMA */
+void __cpuinit smp_store_cpu_info(int id)
+{
+	struct cpuinfo_x86 *c = &cpu_data(id);
+
+	*c = boot_cpu_data;
+	c->cpu_index = id;
+	if (id != 0)
+		identify_secondary_cpu(c);
+	smp_apply_quirks(c);
+}
 
-u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID };
 
-static void map_cpu_to_logical_apicid(void)
+void __cpuinit set_cpu_sibling_map(int cpu)
 {
-	int cpu = smp_processor_id();
-	int apicid = logical_smp_processor_id();
-	int node = apicid_to_node(apicid);
+	int i;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	if (!node_online(node))
-		node = first_online_node;
+	cpu_set(cpu, cpu_sibling_setup_map);
 
-	cpu_2_logical_apicid[cpu] = apicid;
-	map_cpu_to_node(cpu, node);
+	if (smp_num_siblings > 1) {
+		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
+			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
+				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
+				cpu_set(cpu, per_cpu(cpu_sibling_map, i));
+				cpu_set(i, per_cpu(cpu_core_map, cpu));
+				cpu_set(cpu, per_cpu(cpu_core_map, i));
+				cpu_set(i, c->llc_shared_map);
+				cpu_set(cpu, cpu_data(i).llc_shared_map);
+			}
+		}
+	} else {
+		cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
+	}
+
+	cpu_set(cpu, c->llc_shared_map);
+
+	if (current_cpu_data.x86_max_cores == 1) {
+		per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu);
+		c->booted_cores = 1;
+		return;
+	}
+
+	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
+		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
+			cpu_set(i, c->llc_shared_map);
+			cpu_set(cpu, cpu_data(i).llc_shared_map);
+		}
+		if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
+			cpu_set(i, per_cpu(cpu_core_map, cpu));
+			cpu_set(cpu, per_cpu(cpu_core_map, i));
+			/*
+			 *  Does this new cpu bringup a new core?
+			 */
+			if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) {
+				/*
+				 * for each core in package, increment
+				 * the booted_cores for this new cpu
+				 */
+				if (first_cpu(per_cpu(cpu_sibling_map, i)) == i)
+					c->booted_cores++;
+				/*
+				 * increment the core count for all
+				 * the other cpus in this package
+				 */
+				if (i != cpu)
+					cpu_data(i).booted_cores++;
+			} else if (i != cpu && !c->booted_cores)
+				c->booted_cores = cpu_data(i).booted_cores;
+		}
+	}
 }
 
-static void unmap_cpu_to_logical_apicid(int cpu)
+/* maps the cpu to the sched domain representing multi-core */
+cpumask_t cpu_coregroup_map(int cpu)
 {
-	cpu_2_logical_apicid[cpu] = BAD_APICID;
-	unmap_cpu_to_node(cpu);
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	/*
+	 * For perf, we return last level cache shared map.
+	 * And for power savings, we return cpu_core_map
+	 */
+	if (sched_mc_power_savings || sched_smt_power_savings)
+		return per_cpu(cpu_core_map, cpu);
+	else
+		return c->llc_shared_map;
+}
+
+#ifdef CONFIG_X86_32
+/*
+ * We are called very early to get the low memory for the
+ * SMP bootup trampoline page.
+ */
+void __init smp_alloc_memory(void)
+{
+	trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
+	/*
+	 * Has to be in very low memory so we can execute
+	 * real-mode AP code.
+	 */
+	if (__pa(trampoline_base) >= 0x9F000)
+		BUG();
+}
+#endif
+
+void impress_friends(void)
+{
+	int cpu;
+	unsigned long bogosum = 0;
+	/*
+	 * Allow the user to impress friends.
+	 */
+	Dprintk("Before bogomips.\n");
+	for_each_possible_cpu(cpu)
+		if (cpu_isset(cpu, cpu_callout_map))
+			bogosum += cpu_data(cpu).loops_per_jiffy;
+	printk(KERN_INFO
+		"Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
+		num_online_cpus(),
+		bogosum/(500000/HZ),
+		(bogosum/(5000/HZ))%100);
+
+	Dprintk("Before bogocount - setting activated=1.\n");
 }
 
 static inline void __inquire_remote_apic(int apicid)
 {
-	int i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
+	unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
 	char *names[] = { "ID", "VERSION", "SPIV" };
 	int timeout;
-	unsigned long status;
+	u32 status;
 
-	printk("Inquiring remote APIC #%d...\n", apicid);
+	printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
 
 	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		printk("... APIC #%d %s: ", apicid, names[i]);
+		printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
 
 		/*
 		 * Wait for idle.
 		 */
 		status = safe_apic_wait_icr_idle();
 		if (status)
-			printk("a previous APIC delivery may have failed\n");
+			printk(KERN_CONT
+			       "a previous APIC delivery may have failed\n");
 
 		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
 		apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
@@ -538,16 +617,16 @@ static inline void __inquire_remote_apic(int apicid)
 		switch (status) {
 		case APIC_ICR_RR_VALID:
 			status = apic_read(APIC_RRR);
-			printk("%lx\n", status);
+			printk(KERN_CONT "%08x\n", status);
 			break;
 		default:
-			printk("failed\n");
+			printk(KERN_CONT "failed\n");
 		}
 	}
 }
 
 #ifdef WAKE_SECONDARY_VIA_NMI
-/* 
+/*
  * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
  * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
  * won't ... remember to clear down the APIC, etc later.
@@ -584,9 +663,9 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	Dprintk("NMI sent.\n");
 
 	if (send_status)
-		printk("APIC never delivered???\n");
+		printk(KERN_ERR "APIC never delivered???\n");
 	if (accept_status)
-		printk("APIC delivery error (%lx).\n", accept_status);
+		printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
 
 	return (send_status | accept_status);
 }
@@ -599,6 +678,12 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	unsigned long send_status, accept_status = 0;
 	int maxlvt, num_starts, j;
 
+	if (get_uv_system_type() == UV_NON_UNIQUE_APIC) {
+		send_status = uv_wakeup_secondary(phys_apicid, start_eip);
+		atomic_set(&init_deasserted, 1);
+		return send_status;
+	}
+
 	/*
 	 * Be paranoid about clearing APIC errors.
 	 */
@@ -637,6 +722,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	Dprintk("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
+	mb();
 	atomic_set(&init_deasserted, 1);
 
 	/*
@@ -655,7 +741,11 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	 * target processor state.
 	 */
 	startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
-		         (unsigned long) stack_start.sp);
+#ifdef CONFIG_X86_64
+			 (unsigned long)init_rsp);
+#else
+			 (unsigned long)stack_start.sp);
+#endif
 
 	/*
 	 * Run STARTUP IPI loop.
@@ -665,7 +755,7 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	maxlvt = lapic_get_maxlvt();
 
 	for (j = 1; j <= num_starts; j++) {
-		Dprintk("Sending STARTUP #%d.\n",j);
+		Dprintk("Sending STARTUP #%d.\n", j);
 		apic_read_around(APIC_SPIV);
 		apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
@@ -711,49 +801,29 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	Dprintk("After Startup.\n");
 
 	if (send_status)
-		printk("APIC never delivered???\n");
+		printk(KERN_ERR "APIC never delivered???\n");
 	if (accept_status)
-		printk("APIC delivery error (%lx).\n", accept_status);
+		printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
 
 	return (send_status | accept_status);
 }
 #endif	/* WAKE_SECONDARY_VIA_INIT */
 
-extern cpumask_t cpu_initialized;
-static inline int alloc_cpu_id(void)
-{
-	cpumask_t	tmp_map;
+struct create_idle {
+	struct work_struct work;
+	struct task_struct *idle;
+	struct completion done;
 	int cpu;
-	cpus_complement(tmp_map, cpu_present_map);
-	cpu = first_cpu(tmp_map);
-	if (cpu >= NR_CPUS)
-		return -ENODEV;
-	return cpu;
-}
+};
 
-#ifdef CONFIG_HOTPLUG_CPU
-static struct task_struct * __cpuinitdata cpu_idle_tasks[NR_CPUS];
-static inline struct task_struct * __cpuinit alloc_idle_task(int cpu)
+static void __cpuinit do_fork_idle(struct work_struct *work)
 {
-	struct task_struct *idle;
+	struct create_idle *c_idle =
+		container_of(work, struct create_idle, work);
 
-	if ((idle = cpu_idle_tasks[cpu]) != NULL) {
-		/* initialize thread_struct.  we really want to avoid destroy
-		 * idle tread
-		 */
-		idle->thread.sp = (unsigned long)task_pt_regs(idle);
-		init_idle(idle, cpu);
-		return idle;
-	}
-	idle = fork_idle(cpu);
-
-	if (!IS_ERR(idle))
-		cpu_idle_tasks[cpu] = idle;
-	return idle;
+	c_idle->idle = fork_idle(c_idle->cpu);
+	complete(&c_idle->done);
 }
-#else
-#define alloc_idle_task(cpu) fork_idle(cpu)
-#endif
 
 static int __cpuinit do_boot_cpu(int apicid, int cpu)
 /*
@@ -762,45 +832,92 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
  * Returns zero if CPU booted OK, else error code from wakeup_secondary_cpu.
  */
 {
-	struct task_struct *idle;
-	unsigned long boot_error;
+	unsigned long boot_error = 0;
 	int timeout;
-	unsigned long start_eip;
+	unsigned long start_ip;
 	unsigned short nmi_high = 0, nmi_low = 0;
+	struct create_idle c_idle = {
+		.cpu = cpu,
+		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
+	};
+	INIT_WORK(&c_idle.work, do_fork_idle);
+#ifdef CONFIG_X86_64
+	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
+	if (!cpu_gdt_descr[cpu].address &&
+		!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
+		printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
+		return -1;
+	}
 
-	/*
-	 * Save current MTRR state in case it was changed since early boot
-	 * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
-	 */
-	mtrr_save_state();
+	/* Allocate node local memory for AP pdas */
+	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
+		struct x8664_pda *newpda, *pda;
+		int node = cpu_to_node(cpu);
+		pda = cpu_pda(cpu);
+		newpda = kmalloc_node(sizeof(struct x8664_pda), GFP_ATOMIC,
+				      node);
+		if (newpda) {
+			memcpy(newpda, pda, sizeof(struct x8664_pda));
+			cpu_pda(cpu) = newpda;
+		} else
+			printk(KERN_ERR
+		"Could not allocate node local PDA for CPU %d on node %d\n",
+				cpu, node);
+	}
+#endif
+
+	alternatives_smp_switch(1);
+
+	c_idle.idle = get_idle_for_cpu(cpu);
 
 	/*
 	 * We can't use kernel_thread since we must avoid to
 	 * reschedule the child.
 	 */
-	idle = alloc_idle_task(cpu);
-	if (IS_ERR(idle))
-		panic("failed fork for CPU %d", cpu);
+	if (c_idle.idle) {
+		c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
+			(THREAD_SIZE +  task_stack_page(c_idle.idle))) - 1);
+		init_idle(c_idle.idle, cpu);
+		goto do_rest;
+	}
 
+	if (!keventd_up() || current_is_keventd())
+		c_idle.work.func(&c_idle.work);
+	else {
+		schedule_work(&c_idle.work);
+		wait_for_completion(&c_idle.done);
+	}
+
+	if (IS_ERR(c_idle.idle)) {
+		printk("failed fork for CPU %d\n", cpu);
+		return PTR_ERR(c_idle.idle);
+	}
+
+	set_idle_for_cpu(cpu, c_idle.idle);
+do_rest:
+#ifdef CONFIG_X86_32
+	per_cpu(current_task, cpu) = c_idle.idle;
 	init_gdt(cpu);
- 	per_cpu(current_task, cpu) = idle;
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
+	c_idle.idle->thread.ip = (unsigned long) start_secondary;
+	/* Stack for startup_32 can be just as for start_secondary onwards */
+	stack_start.sp = (void *) c_idle.idle->thread.sp;
+	irq_ctx_init(cpu);
+#else
+	cpu_pda(cpu)->pcurrent = c_idle.idle;
+	init_rsp = c_idle.idle->thread.sp;
+	load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
+	initial_code = (unsigned long)start_secondary;
+	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
+#endif
 
-	idle->thread.ip = (unsigned long) start_secondary;
-	/* start_eip had better be page-aligned! */
-	start_eip = setup_trampoline();
-
-	++cpucount;
-	alternatives_smp_switch(1);
+	/* start_ip had better be page-aligned! */
+	start_ip = setup_trampoline();
 
 	/* So we see what's up   */
-	printk("Booting processor %d/%d ip %lx\n", cpu, apicid, start_eip);
-	/* Stack for startup_32 can be just as for start_secondary onwards */
-	stack_start.sp = (void *) idle->thread.sp;
-
-	irq_ctx_init(cpu);
+	printk(KERN_INFO "Booting processor %d/%d ip %lx\n",
+			  cpu, apicid, start_ip);
 
-	per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	/*
 	 * This grunge runs the startup process for
 	 * the targeted processor.
@@ -808,16 +925,24 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 
 	atomic_set(&init_deasserted, 0);
 
-	Dprintk("Setting warm reset code and vector.\n");
+	if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
+
+		Dprintk("Setting warm reset code and vector.\n");
 
-	store_NMI_vector(&nmi_high, &nmi_low);
+		store_NMI_vector(&nmi_high, &nmi_low);
 
-	smpboot_setup_warm_reset_vector(start_eip);
+		smpboot_setup_warm_reset_vector(start_ip);
+		/*
+		 * Be paranoid about clearing APIC errors.
+	 	*/
+		apic_write(APIC_ESR, 0);
+		apic_read(APIC_ESR);
+	}
 
 	/*
 	 * Starting actual IPI sequence...
 	 */
-	boot_error = wakeup_secondary_cpu(apicid, start_eip);
+	boot_error = wakeup_secondary_cpu(apicid, start_ip);
 
 	if (!boot_error) {
 		/*
@@ -839,175 +964,179 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 		if (cpu_isset(cpu, cpu_callin_map)) {
 			/* number CPUs logically, starting from 1 (BSP is 0) */
 			Dprintk("OK.\n");
-			printk("CPU%d: ", cpu);
+			printk(KERN_INFO "CPU%d: ", cpu);
 			print_cpu_info(&cpu_data(cpu));
 			Dprintk("CPU has booted.\n");
 		} else {
-			boot_error= 1;
+			boot_error = 1;
 			if (*((volatile unsigned char *)trampoline_base)
 					== 0xA5)
 				/* trampoline started but...? */
-				printk("Stuck ??\n");
+				printk(KERN_ERR "Stuck ??\n");
 			else
 				/* trampoline code not run */
-				printk("Not responding.\n");
-			inquire_remote_apic(apicid);
+				printk(KERN_ERR "Not responding.\n");
+			if (get_uv_system_type() != UV_NON_UNIQUE_APIC)
+				inquire_remote_apic(apicid);
 		}
 	}
 
 	if (boot_error) {
 		/* Try to put things back the way they were before ... */
 		unmap_cpu_to_logical_apicid(cpu);
-		cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
+#ifdef CONFIG_X86_64
+		clear_node_cpumask(cpu); /* was set by numa_add_cpu */
+#endif
+		cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */
 		cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
-		cpucount--;
-	} else {
-		per_cpu(x86_cpu_to_apicid, cpu) = apicid;
-		cpu_set(cpu, cpu_present_map);
+		cpu_clear(cpu, cpu_possible_map);
+		cpu_clear(cpu, cpu_present_map);
+		per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
 	}
 
 	/* mark "stuck" area as not stuck */
 	*((volatile unsigned long *)trampoline_base) = 0;
 
+	/*
+	 * Cleanup possible dangling ends...
+	 */
+	smpboot_restore_warm_reset_vector();
+
 	return boot_error;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-void cpu_exit_clear(void)
+int __cpuinit native_cpu_up(unsigned int cpu)
 {
-	int cpu = raw_smp_processor_id();
-
-	idle_task_exit();
-
-	cpucount --;
-	cpu_uninit();
-	irq_ctx_exit(cpu);
-
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
+	int apicid = cpu_present_to_apicid(cpu);
+	unsigned long flags;
+	int err;
 
-	cpu_clear(cpu, smp_commenced_mask);
-	unmap_cpu_to_logical_apicid(cpu);
-}
+	WARN_ON(irqs_disabled());
 
-struct warm_boot_cpu_info {
-	struct completion *complete;
-	struct work_struct task;
-	int apicid;
-	int cpu;
-};
+	Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
 
-static void __cpuinit do_warm_boot_cpu(struct work_struct *work)
-{
-	struct warm_boot_cpu_info *info =
-		container_of(work, struct warm_boot_cpu_info, task);
-	do_boot_cpu(info->apicid, info->cpu);
-	complete(info->complete);
-}
+	if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
+	    !physid_isset(apicid, phys_cpu_present_map)) {
+		printk(KERN_ERR "%s: bad cpu %d\n", __func__, cpu);
+		return -EINVAL;
+	}
 
-static int __cpuinit __smp_prepare_cpu(int cpu)
-{
-	DECLARE_COMPLETION_ONSTACK(done);
-	struct warm_boot_cpu_info info;
-	int	apicid, ret;
-
-	apicid = per_cpu(x86_cpu_to_apicid, cpu);
-	if (apicid == BAD_APICID) {
-		ret = -ENODEV;
-		goto exit;
+	/*
+	 * Already booted CPU?
+	 */
+	if (cpu_isset(cpu, cpu_callin_map)) {
+		Dprintk("do_boot_cpu %d Already started\n", cpu);
+		return -ENOSYS;
 	}
 
-	info.complete = &done;
-	info.apicid = apicid;
-	info.cpu = cpu;
-	INIT_WORK(&info.task, do_warm_boot_cpu);
+	/*
+	 * Save current MTRR state in case it was changed since early boot
+	 * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
+	 */
+	mtrr_save_state();
+
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
+#ifdef CONFIG_X86_32
 	/* init low mem mapping */
 	clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
 			min_t(unsigned long, KERNEL_PGD_PTRS, USER_PGD_PTRS));
 	flush_tlb_all();
-	schedule_work(&info.task);
-	wait_for_completion(&done);
-
-	zap_low_mappings();
-	ret = 0;
-exit:
-	return ret;
-}
-#endif
-
-/*
- * Cycle through the processors sending APIC IPIs to boot each.
- */
-
-static int boot_cpu_logical_apicid;
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-#ifdef CONFIG_X86_NUMAQ
-EXPORT_SYMBOL(xquad_portio);
 #endif
 
-static void __init smp_boot_cpus(unsigned int max_cpus)
-{
-	int apicid, cpu, bit, kicked;
-	unsigned long bogosum = 0;
+	err = do_boot_cpu(apicid, cpu);
+	if (err < 0) {
+		Dprintk("do_boot_cpu failed %d\n", err);
+		return err;
+	}
 
 	/*
-	 * Setup boot CPU information
+	 * Check TSC synchronization with the AP (keep irqs disabled
+	 * while doing so):
 	 */
-	smp_store_cpu_info(0); /* Final full version of the data */
-	printk("CPU%d: ", 0);
-	print_cpu_info(&cpu_data(0));
+	local_irq_save(flags);
+	check_tsc_sync_source(cpu);
+	local_irq_restore(flags);
 
-	boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-	boot_cpu_logical_apicid = logical_smp_processor_id();
-	per_cpu(x86_cpu_to_apicid, 0) = boot_cpu_physical_apicid;
+	while (!cpu_isset(cpu, cpu_online_map)) {
+		cpu_relax();
+		touch_nmi_watchdog();
+	}
 
-	current_thread_info()->cpu = 0;
+	return 0;
+}
 
-	set_cpu_sibling_map(0);
+/*
+ * Fall back to non SMP mode after errors.
+ *
+ * RED-PEN audit/test this more. I bet there is more state messed up here.
+ */
+static __init void disable_smp(void)
+{
+	cpu_present_map = cpumask_of_cpu(0);
+	cpu_possible_map = cpumask_of_cpu(0);
+#ifdef CONFIG_X86_32
+	smpboot_clear_io_apic_irqs();
+#endif
+	if (smp_found_config)
+		phys_cpu_present_map =
+				physid_mask_of_physid(boot_cpu_physical_apicid);
+	else
+		phys_cpu_present_map = physid_mask_of_physid(0);
+	map_cpu_to_logical_apicid();
+	cpu_set(0, per_cpu(cpu_sibling_map, 0));
+	cpu_set(0, per_cpu(cpu_core_map, 0));
+}
+
+/*
+ * Various sanity checks.
+ */
+static int __init smp_sanity_check(unsigned max_cpus)
+{
+	preempt_disable();
+	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
+		printk(KERN_WARNING "weird, boot CPU (#%d) not listed"
+				    "by the BIOS.\n", hard_smp_processor_id());
+		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
+	}
 
 	/*
 	 * If we couldn't find an SMP configuration at boot time,
 	 * get out of here now!
 	 */
 	if (!smp_found_config && !acpi_lapic) {
+		preempt_enable();
 		printk(KERN_NOTICE "SMP motherboard not detected.\n");
-		smpboot_clear_io_apic_irqs();
-		phys_cpu_present_map = physid_mask_of_physid(0);
+		disable_smp();
 		if (APIC_init_uniprocessor())
 			printk(KERN_NOTICE "Local APIC not detected."
 					   " Using dummy APIC emulation.\n");
-		map_cpu_to_logical_apicid();
-		cpu_set(0, per_cpu(cpu_sibling_map, 0));
-		cpu_set(0, per_cpu(cpu_core_map, 0));
-		return;
+		return -1;
 	}
 
 	/*
 	 * Should not be necessary because the MP table should list the boot
 	 * CPU too, but we do it for the sake of robustness anyway.
-	 * Makes no sense to do this check in clustered apic mode, so skip it
 	 */
 	if (!check_phys_apicid_present(boot_cpu_physical_apicid)) {
-		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-				boot_cpu_physical_apicid);
+		printk(KERN_NOTICE
+			"weird, boot CPU (#%d) not listed by the BIOS.\n",
+			boot_cpu_physical_apicid);
 		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
 	}
+	preempt_enable();
 
 	/*
 	 * If we couldn't find a local APIC, then get out of here now!
 	 */
-	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) && !cpu_has_apic) {
+	if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
+	    !cpu_has_apic) {
 		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
 			boot_cpu_physical_apicid);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-		smpboot_clear_io_apic_irqs();
-		phys_cpu_present_map = physid_mask_of_physid(0);
-		map_cpu_to_logical_apicid();
-		cpu_set(0, per_cpu(cpu_sibling_map, 0));
-		cpu_set(0, per_cpu(cpu_core_map, 0));
-		return;
+		printk(KERN_ERR "... forcing use of dummy APIC emulation."
+				"(tell your hw vendor)\n");
+		smpboot_clear_io_apic();
+		return -1;
 	}
 
 	verify_local_APIC();
@@ -1016,137 +1145,148 @@ static void __init smp_boot_cpus(unsigned int max_cpus)
 	 * If SMP should be disabled, then really disable it!
 	 */
 	if (!max_cpus) {
-		smp_found_config = 0;
-		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-
+		printk(KERN_INFO "SMP mode deactivated,"
+				 "forcing use of dummy APIC emulation.\n");
+		smpboot_clear_io_apic();
+#ifdef CONFIG_X86_32
 		if (nmi_watchdog == NMI_LOCAL_APIC) {
-			printk(KERN_INFO "activating minimal APIC for NMI watchdog use.\n");
+			printk(KERN_INFO "activating minimal APIC for"
+					 "NMI watchdog use.\n");
 			connect_bsp_APIC();
 			setup_local_APIC();
+			end_local_APIC_setup();
 		}
-		smpboot_clear_io_apic_irqs();
-		phys_cpu_present_map = physid_mask_of_physid(0);
-		map_cpu_to_logical_apicid();
-		cpu_set(0, per_cpu(cpu_sibling_map, 0));
-		cpu_set(0, per_cpu(cpu_core_map, 0));
-		return;
+#endif
+		return -1;
 	}
 
-	connect_bsp_APIC();
-	setup_local_APIC();
-	map_cpu_to_logical_apicid();
+	return 0;
+}
 
+static void __init smp_cpu_index_default(void)
+{
+	int i;
+	struct cpuinfo_x86 *c;
 
-	setup_portio_remap();
+	for_each_cpu_mask(i, cpu_possible_map) {
+		c = &cpu_data(i);
+		/* mark all to hotplug */
+		c->cpu_index = NR_CPUS;
+	}
+}
 
+/*
+ * Prepare for SMP bootup.  The MP table or ACPI has been read
+ * earlier.  Just do some sanity checking here and enable APIC mode.
+ */
+void __init native_smp_prepare_cpus(unsigned int max_cpus)
+{
+	nmi_watchdog_default();
+	smp_cpu_index_default();
+	current_cpu_data = boot_cpu_data;
+	cpu_callin_map = cpumask_of_cpu(0);
+	mb();
 	/*
-	 * Scan the CPU present map and fire up the other CPUs via do_boot_cpu
-	 *
-	 * In clustered apic mode, phys_cpu_present_map is a constructed thus:
-	 * bits 0-3 are quad0, 4-7 are quad1, etc. A perverse twist on the 
-	 * clustered apic ID.
+	 * Setup boot CPU information
 	 */
-	Dprintk("CPU present map: %lx\n", physids_coerce(phys_cpu_present_map));
-
-	kicked = 1;
-	for (bit = 0; kicked < NR_CPUS && bit < MAX_APICS; bit++) {
-		apicid = cpu_present_to_apicid(bit);
-		/*
-		 * Don't even attempt to start the boot CPU!
-		 */
-		if ((apicid == boot_cpu_apicid) || (apicid == BAD_APICID))
-			continue;
+	smp_store_cpu_info(0); /* Final full version of the data */
+	boot_cpu_logical_apicid = logical_smp_processor_id();
+	current_thread_info()->cpu = 0;  /* needed? */
+	set_cpu_sibling_map(0);
 
-		if (!check_apicid_present(bit))
-			continue;
-		if (max_cpus <= cpucount+1)
-			continue;
+	if (smp_sanity_check(max_cpus) < 0) {
+		printk(KERN_INFO "SMP disabled\n");
+		disable_smp();
+		return;
+	}
 
-		if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
-			printk("CPU #%d not responding - cannot use it.\n",
-								apicid);
-		else
-			++kicked;
+	preempt_disable();
+	if (GET_APIC_ID(read_apic_id()) != boot_cpu_physical_apicid) {
+		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
+		     GET_APIC_ID(read_apic_id()), boot_cpu_physical_apicid);
+		/* Or can we switch back to PIC here? */
 	}
+	preempt_enable();
 
+#ifdef CONFIG_X86_32
+	connect_bsp_APIC();
+#endif
 	/*
-	 * Cleanup possible dangling ends...
+	 * Switch from PIC to APIC mode.
 	 */
-	smpboot_restore_warm_reset_vector();
+	setup_local_APIC();
 
+#ifdef CONFIG_X86_64
 	/*
-	 * Allow the user to impress friends.
+	 * Enable IO APIC before setting up error vector
 	 */
-	Dprintk("Before bogomips.\n");
-	for_each_possible_cpu(cpu)
-		if (cpu_isset(cpu, cpu_callout_map))
-			bogosum += cpu_data(cpu).loops_per_jiffy;
-	printk(KERN_INFO
-		"Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
-		cpucount+1,
-		bogosum/(500000/HZ),
-		(bogosum/(5000/HZ))%100);
-	
-	Dprintk("Before bogocount - setting activated=1.\n");
-
-	if (smp_b_stepping)
-		printk(KERN_WARNING "WARNING: SMP operation may be unreliable with B stepping processors.\n");
+	if (!skip_ioapic_setup && nr_ioapics)
+		enable_IO_APIC();
+#endif
+	end_local_APIC_setup();
 
-	/*
-	 * Don't taint if we are running SMP kernel on a single non-MP
-	 * approved Athlon
-	 */
-	if (tainted & TAINT_UNSAFE_SMP) {
-		if (cpucount)
-			printk (KERN_INFO "WARNING: This combination of AMD processors is not suitable for SMP.\n");
-		else
-			tainted &= ~TAINT_UNSAFE_SMP;
-	}
+	map_cpu_to_logical_apicid();
 
-	Dprintk("Boot done.\n");
+	setup_portio_remap();
 
+	smpboot_setup_io_apic();
 	/*
-	 * construct cpu_sibling_map, so that we can tell sibling CPUs
-	 * efficiently.
+	 * Set up local APIC timer on boot CPU.
 	 */
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		cpus_clear(per_cpu(cpu_core_map, cpu));
-	}
-
-	cpu_set(0, per_cpu(cpu_sibling_map, 0));
-	cpu_set(0, per_cpu(cpu_core_map, 0));
-
-	smpboot_setup_io_apic();
 
+	printk(KERN_INFO "CPU%d: ", 0);
+	print_cpu_info(&cpu_data(0));
 	setup_boot_clock();
 }
+/*
+ * Early setup to make printk work.
+ */
+void __init native_smp_prepare_boot_cpu(void)
+{
+	int me = smp_processor_id();
+#ifdef CONFIG_X86_32
+	init_gdt(me);
+	switch_to_new_gdt();
+#endif
+	/* already set me in cpu_online_map in boot_cpu_init() */
+	cpu_set(me, cpu_callout_map);
+	per_cpu(cpu_state, me) = CPU_ONLINE;
+}
 
-/* These are wrappers to interface to the new boot process.  Someone
-   who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
-void __init native_smp_prepare_cpus(unsigned int max_cpus)
+void __init native_smp_cpus_done(unsigned int max_cpus)
 {
-	smp_commenced_mask = cpumask_of_cpu(0);
-	cpu_callin_map = cpumask_of_cpu(0);
-	mb();
-	smp_boot_cpus(max_cpus);
+	Dprintk("Boot done.\n");
+
+	impress_friends();
+	smp_checks();
+#ifdef CONFIG_X86_IO_APIC
+	setup_ioapic_dest();
+#endif
+	check_nmi_watchdog();
+#ifdef CONFIG_X86_32
+	zap_low_mappings();
+#endif
 }
 
-void __init native_smp_prepare_boot_cpu(void)
+#ifdef CONFIG_HOTPLUG_CPU
+
+#  ifdef CONFIG_X86_32
+void cpu_exit_clear(void)
 {
-	unsigned int cpu = smp_processor_id();
+	int cpu = raw_smp_processor_id();
 
-	init_gdt(cpu);
-	switch_to_new_gdt();
+	idle_task_exit();
+
+	cpu_uninit();
+	irq_ctx_exit(cpu);
+
+	cpu_clear(cpu, cpu_callout_map);
+	cpu_clear(cpu, cpu_callin_map);
 
-	cpu_set(cpu, cpu_online_map);
-	cpu_set(cpu, cpu_callout_map);
-	cpu_set(cpu, cpu_present_map);
-	cpu_set(cpu, cpu_possible_map);
-	__get_cpu_var(cpu_state) = CPU_ONLINE;
+	unmap_cpu_to_logical_apicid(cpu);
 }
+#  endif /* CONFIG_X86_32 */
 
-#ifdef CONFIG_HOTPLUG_CPU
 void remove_siblinginfo(int cpu)
 {
 	int sibling;
@@ -1160,7 +1300,7 @@ void remove_siblinginfo(int cpu)
 		if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
 			cpu_data(sibling).booted_cores--;
 	}
-			
+
 	for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
 		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
 	cpus_clear(per_cpu(cpu_sibling_map, cpu));
@@ -1170,35 +1310,99 @@ void remove_siblinginfo(int cpu)
 	cpu_clear(cpu, cpu_sibling_setup_map);
 }
 
+int additional_cpus __initdata = -1;
+
+static __init int setup_additional_cpus(char *s)
+{
+	return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
+}
+early_param("additional_cpus", setup_additional_cpus);
+
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * - Ashok Raj
+ *
+ * Three ways to find out the number of additional hotplug CPUs:
+ * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
+ * - The user can overwrite it with additional_cpus=NUM
+ * - Otherwise don't reserve additional CPUs.
+ * We do this because additional CPUs waste a lot of memory.
+ * -AK
+ */
+__init void prefill_possible_map(void)
+{
+	int i;
+	int possible;
+
+	if (additional_cpus == -1) {
+		if (disabled_cpus > 0)
+			additional_cpus = disabled_cpus;
+		else
+			additional_cpus = 0;
+	}
+	possible = num_processors + additional_cpus;
+	if (possible > NR_CPUS)
+		possible = NR_CPUS;
+
+	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
+		possible, max_t(int, possible - num_processors, 0));
+
+	for (i = 0; i < possible; i++)
+		cpu_set(i, cpu_possible_map);
+}
+
+static void __ref remove_cpu_from_maps(int cpu)
+{
+	cpu_clear(cpu, cpu_online_map);
+#ifdef CONFIG_X86_64
+	cpu_clear(cpu, cpu_callout_map);
+	cpu_clear(cpu, cpu_callin_map);
+	/* was set by cpu_init() */
+	clear_bit(cpu, (unsigned long *)&cpu_initialized);
+	clear_node_cpumask(cpu);
+#endif
+}
+
 int __cpu_disable(void)
 {
-	cpumask_t map = cpu_online_map;
 	int cpu = smp_processor_id();
 
 	/*
 	 * Perhaps use cpufreq to drop frequency, but that could go
 	 * into generic code.
- 	 *
+	 *
 	 * We won't take down the boot processor on i386 due to some
 	 * interrupts only being able to be serviced by the BSP.
 	 * Especially so if we're not using an IOAPIC	-zwane
 	 */
 	if (cpu == 0)
 		return -EBUSY;
+
 	if (nmi_watchdog == NMI_LOCAL_APIC)
 		stop_apic_nmi_watchdog(NULL);
 	clear_local_APIC();
-	/* Allow any queued timer interrupts to get serviced */
+
+	/*
+	 * HACK:
+	 * Allow any queued timer interrupts to get serviced
+	 * This is only a temporary solution until we cleanup
+	 * fixup_irqs as we do for IA64.
+	 */
 	local_irq_enable();
 	mdelay(1);
-	local_irq_disable();
 
+	local_irq_disable();
 	remove_siblinginfo(cpu);
 
-	cpu_clear(cpu, map);
-	fixup_irqs(map);
 	/* It's now safe to remove this processor from the online map */
-	cpu_clear(cpu, cpu_online_map);
+	remove_cpu_from_maps(cpu);
+	fixup_irqs(cpu_online_map);
 	return 0;
 }
 
@@ -1210,14 +1414,14 @@ void __cpu_die(unsigned int cpu)
 	for (i = 0; i < 10; i++) {
 		/* They ack this in play_dead by setting CPU_DEAD */
 		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
-			printk ("CPU %d is now offline\n", cpu);
+			printk(KERN_INFO "CPU %d is now offline\n", cpu);
 			if (1 == num_online_cpus())
 				alternatives_smp_switch(0);
 			return;
 		}
 		msleep(100);
 	}
- 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }
 #else /* ... !CONFIG_HOTPLUG_CPU */
 int __cpu_disable(void)
@@ -1230,82 +1434,8 @@ void __cpu_die(unsigned int cpu)
 	/* We said "no" in __cpu_disable */
 	BUG();
 }
-#endif /* CONFIG_HOTPLUG_CPU */
-
-int __cpuinit native_cpu_up(unsigned int cpu)
-{
-	unsigned long flags;
-#ifdef CONFIG_HOTPLUG_CPU
-	int ret = 0;
-
-	/*
-	 * We do warm boot only on cpus that had booted earlier
-	 * Otherwise cold boot is all handled from smp_boot_cpus().
-	 * cpu_callin_map is set during AP kickstart process. Its reset
-	 * when a cpu is taken offline from cpu_exit_clear().
-	 */
-	if (!cpu_isset(cpu, cpu_callin_map))
-		ret = __smp_prepare_cpu(cpu);
-
-	if (ret)
-		return -EIO;
 #endif
 
-	/* In case one didn't come up */
-	if (!cpu_isset(cpu, cpu_callin_map)) {
-		printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
-		return -EIO;
-	}
-
-	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-	/* Unleash the CPU! */
-	cpu_set(cpu, smp_commenced_mask);
-
-	/*
-	 * Check TSC synchronization with the AP (keep irqs disabled
-	 * while doing so):
-	 */
-	local_irq_save(flags);
-	check_tsc_sync_source(cpu);
-	local_irq_restore(flags);
-
-	while (!cpu_isset(cpu, cpu_online_map)) {
-		cpu_relax();
-		touch_nmi_watchdog();
-	}
-
-	return 0;
-}
-
-void __init native_smp_cpus_done(unsigned int max_cpus)
-{
-#ifdef CONFIG_X86_IO_APIC
-	setup_ioapic_dest();
-#endif
-	zap_low_mappings();
-}
-
-void __init smp_intr_init(void)
-{
-	/*
-	 * IRQ0 must be given a fixed assignment and initialized,
-	 * because it's used before the IO-APIC is set up.
-	 */
-	set_intr_gate(FIRST_DEVICE_VECTOR, interrupt[0]);
-
-	/*
-	 * The reschedule interrupt is a CPU-to-CPU reschedule-helper
-	 * IPI, driven by wakeup.
-	 */
-	set_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
-	/* IPI for invalidation */
-	set_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
-
-	/* IPI for generic function call */
-	set_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-}
-
 /*
  * If the BIOS enumerates physical processors before logical,
  * maxcpus=N at enumeration-time can be used to disable HT.
diff --git a/arch/x86/kernel/smpboot_64.c b/arch/x86/kernel/smpboot_64.c
deleted file mode 100644
index 0880f2c388a9..000000000000
--- a/arch/x86/kernel/smpboot_64.c
+++ /dev/null
@@ -1,1108 +0,0 @@
-/*
- *	x86 SMP booting functions
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *	Copyright 2001 Andi Kleen, SuSE Labs.
- *
- *	Much of the core SMP work is based on previous work by Thomas Radke, to
- *	whom a great many thanks are extended.
- *
- *	Thanks to Intel for making available several different Pentium,
- *	Pentium Pro and Pentium-II/Xeon MP machines.
- *	Original development of Linux SMP code supported by Caldera.
- *
- *	This code is released under the GNU General Public License version 2
- *
- *	Fixes
- *		Felix Koop	:	NR_CPUS used properly
- *		Jose Renau	:	Handle single CPU case.
- *		Alan Cox	:	By repeated request 8) - Total BogoMIP report.
- *		Greg Wright	:	Fix for kernel stacks panic.
- *		Erich Boleyn	:	MP v1.4 and additional changes.
- *	Matthias Sattler	:	Changes for 2.1 kernel map.
- *	Michel Lespinasse	:	Changes for 2.1 kernel map.
- *	Michael Chastain	:	Change trampoline.S to gnu as.
- *		Alan Cox	:	Dumb bug: 'B' step PPro's are fine
- *		Ingo Molnar	:	Added APIC timers, based on code
- *					from Jose Renau
- *		Ingo Molnar	:	various cleanups and rewrites
- *		Tigran Aivazian	:	fixed "0.00 in /proc/uptime on SMP" bug.
- *	Maciej W. Rozycki	:	Bits for genuine 82489DX APICs
- *	Andi Kleen		:	Changed for SMP boot into long mode.
- *		Rusty Russell	:	Hacked into shape for new "hotplug" boot process.
- *      Andi Kleen              :       Converted to new state machine.
- *					Various cleanups.
- *					Probably mostly hotplug CPU ready now.
- *	Ashok Raj			: CPU hotplug support
- */
-
-
-#include <linux/init.h>
-
-#include <linux/mm.h>
-#include <linux/kernel_stat.h>
-#include <linux/bootmem.h>
-#include <linux/thread_info.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/mc146818rtc.h>
-#include <linux/smp.h>
-#include <linux/kdebug.h>
-
-#include <asm/mtrr.h>
-#include <asm/pgalloc.h>
-#include <asm/desc.h>
-#include <asm/tlbflush.h>
-#include <asm/proto.h>
-#include <asm/nmi.h>
-#include <asm/irq.h>
-#include <asm/hw_irq.h>
-#include <asm/numa.h>
-
-/* Number of siblings per CPU package */
-int smp_num_siblings = 1;
-EXPORT_SYMBOL(smp_num_siblings);
-
-/* Last level cache ID of each logical CPU */
-DEFINE_PER_CPU(u16, cpu_llc_id) = BAD_APICID;
-
-/* Bitmask of currently online CPUs */
-cpumask_t cpu_online_map __read_mostly;
-
-EXPORT_SYMBOL(cpu_online_map);
-
-/*
- * Private maps to synchronize booting between AP and BP.
- * Probably not needed anymore, but it makes for easier debugging. -AK
- */
-cpumask_t cpu_callin_map;
-cpumask_t cpu_callout_map;
-cpumask_t cpu_possible_map;
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* Per CPU bogomips and other parameters */
-DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
-EXPORT_PER_CPU_SYMBOL(cpu_info);
-
-/* Set when the idlers are all forked */
-int smp_threads_ready;
-
-/* representing HT siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_sibling_map);
-EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
-
-/* representing HT and core siblings of each logical CPU */
-DEFINE_PER_CPU(cpumask_t, cpu_core_map);
-EXPORT_PER_CPU_SYMBOL(cpu_core_map);
-
-/*
- * Trampoline 80x86 program as an array.
- */
-
-extern const unsigned char trampoline_data[];
-extern const unsigned char trampoline_end[];
-
-/* State of each CPU */
-DEFINE_PER_CPU(int, cpu_state) = { 0 };
-
-/*
- * Store all idle threads, this can be reused instead of creating
- * a new thread. Also avoids complicated thread destroy functionality
- * for idle threads.
- */
-#ifdef CONFIG_HOTPLUG_CPU
-/*
- * Needed only for CONFIG_HOTPLUG_CPU because __cpuinitdata is
- * removed after init for !CONFIG_HOTPLUG_CPU.
- */
-static DEFINE_PER_CPU(struct task_struct *, idle_thread_array);
-#define get_idle_for_cpu(x)     (per_cpu(idle_thread_array, x))
-#define set_idle_for_cpu(x,p)   (per_cpu(idle_thread_array, x) = (p))
-#else
-struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
-#define get_idle_for_cpu(x)     (idle_thread_array[(x)])
-#define set_idle_for_cpu(x,p)   (idle_thread_array[(x)] = (p))
-#endif
-
-
-/*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
- * has made sure it's suitably aligned.
- */
-
-static unsigned long __cpuinit setup_trampoline(void)
-{
-	void *tramp = __va(SMP_TRAMPOLINE_BASE); 
-	memcpy(tramp, trampoline_data, trampoline_end - trampoline_data);
-	return virt_to_phys(tramp);
-}
-
-/*
- * The bootstrap kernel entry code has set these up. Save them for
- * a given CPU
- */
-
-static void __cpuinit smp_store_cpu_info(int id)
-{
-	struct cpuinfo_x86 *c = &cpu_data(id);
-
-	*c = boot_cpu_data;
-	c->cpu_index = id;
-	identify_cpu(c);
-	print_cpu_info(c);
-}
-
-static atomic_t init_deasserted __cpuinitdata;
-
-/*
- * Report back to the Boot Processor.
- * Running on AP.
- */
-void __cpuinit smp_callin(void)
-{
-	int cpuid, phys_id;
-	unsigned long timeout;
-
-	/*
-	 * If waken up by an INIT in an 82489DX configuration
-	 * we may get here before an INIT-deassert IPI reaches
-	 * our local APIC.  We have to wait for the IPI or we'll
-	 * lock up on an APIC access.
-	 */
-	while (!atomic_read(&init_deasserted))
-		cpu_relax();
-
-	/*
-	 * (This works even if the APIC is not enabled.)
-	 */
-	phys_id = GET_APIC_ID(apic_read(APIC_ID));
-	cpuid = smp_processor_id();
-	if (cpu_isset(cpuid, cpu_callin_map)) {
-		panic("smp_callin: phys CPU#%d, CPU#%d already present??\n",
-					phys_id, cpuid);
-	}
-	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
-
-	/*
-	 * STARTUP IPIs are fragile beasts as they might sometimes
-	 * trigger some glue motherboard logic. Complete APIC bus
-	 * silence for 1 second, this overestimates the time the
-	 * boot CPU is spending to send the up to 2 STARTUP IPIs
-	 * by a factor of two. This should be enough.
-	 */
-
-	/*
-	 * Waiting 2s total for startup (udelay is not yet working)
-	 */
-	timeout = jiffies + 2*HZ;
-	while (time_before(jiffies, timeout)) {
-		/*
-		 * Has the boot CPU finished it's STARTUP sequence?
-		 */
-		if (cpu_isset(cpuid, cpu_callout_map))
-			break;
-		cpu_relax();
-	}
-
-	if (!time_before(jiffies, timeout)) {
-		panic("smp_callin: CPU%d started up but did not get a callout!\n",
-			cpuid);
-	}
-
-	/*
-	 * the boot CPU has finished the init stage and is spinning
-	 * on callin_map until we finish. We are free to set up this
-	 * CPU, first the APIC. (this is probably redundant on most
-	 * boards)
-	 */
-
-	Dprintk("CALLIN, before setup_local_APIC().\n");
-	setup_local_APIC();
-	end_local_APIC_setup();
-
-	/*
-	 * Get our bogomips.
- 	 *
- 	 * Need to enable IRQs because it can take longer and then
-	 * the NMI watchdog might kill us.
-	 */
-	local_irq_enable();
-	calibrate_delay();
-	local_irq_disable();
-	Dprintk("Stack at about %p\n",&cpuid);
-
-	/*
-	 * Save our processor parameters
-	 */
- 	smp_store_cpu_info(cpuid);
-
-	/*
-	 * Allow the master to continue.
-	 */
-	cpu_set(cpuid, cpu_callin_map);
-}
-
-/* maps the cpu to the sched domain representing multi-core */
-cpumask_t cpu_coregroup_map(int cpu)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	/*
-	 * For perf, we return last level cache shared map.
-	 * And for power savings, we return cpu_core_map
-	 */
-	if (sched_mc_power_savings || sched_smt_power_savings)
-		return per_cpu(cpu_core_map, cpu);
-	else
-		return c->llc_shared_map;
-}
-
-/* representing cpus for which sibling maps can be computed */
-static cpumask_t cpu_sibling_setup_map;
-
-static inline void set_cpu_sibling_map(int cpu)
-{
-	int i;
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
-	cpu_set(cpu, cpu_sibling_setup_map);
-
-	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
-			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
-			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
-				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
-				cpu_set(cpu, per_cpu(cpu_sibling_map, i));
-				cpu_set(i, per_cpu(cpu_core_map, cpu));
-				cpu_set(cpu, per_cpu(cpu_core_map, i));
-				cpu_set(i, c->llc_shared_map);
-				cpu_set(cpu, cpu_data(i).llc_shared_map);
-			}
-		}
-	} else {
-		cpu_set(cpu, per_cpu(cpu_sibling_map, cpu));
-	}
-
-	cpu_set(cpu, c->llc_shared_map);
-
-	if (current_cpu_data.x86_max_cores == 1) {
-		per_cpu(cpu_core_map, cpu) = per_cpu(cpu_sibling_map, cpu);
-		c->booted_cores = 1;
-		return;
-	}
-
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
-		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
-		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
-			cpu_set(i, c->llc_shared_map);
-			cpu_set(cpu, cpu_data(i).llc_shared_map);
-		}
-		if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
-			cpu_set(i, per_cpu(cpu_core_map, cpu));
-			cpu_set(cpu, per_cpu(cpu_core_map, i));
-			/*
-			 *  Does this new cpu bringup a new core?
-			 */
-			if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1) {
-				/*
-				 * for each core in package, increment
-				 * the booted_cores for this new cpu
-				 */
-				if (first_cpu(per_cpu(cpu_sibling_map, i)) == i)
-					c->booted_cores++;
-				/*
-				 * increment the core count for all
-				 * the other cpus in this package
-				 */
-				if (i != cpu)
-					cpu_data(i).booted_cores++;
-			} else if (i != cpu && !c->booted_cores)
-				c->booted_cores = cpu_data(i).booted_cores;
-		}
-	}
-}
-
-/*
- * Setup code on secondary processor (after comming out of the trampoline)
- */
-void __cpuinit start_secondary(void)
-{
-	/*
-	 * Dont put anything before smp_callin(), SMP
-	 * booting is too fragile that we want to limit the
-	 * things done here to the most necessary things.
-	 */
-	cpu_init();
-	preempt_disable();
-	smp_callin();
-
-	/* otherwise gcc will move up the smp_processor_id before the cpu_init */
-	barrier();
-
-	/*
-  	 * Check TSC sync first:
- 	 */
-	check_tsc_sync_target();
-
-	if (nmi_watchdog == NMI_IO_APIC) {
-		disable_8259A_irq(0);
-		enable_NMI_through_LVT0();
-		enable_8259A_irq(0);
-	}
-
-	/*
-	 * The sibling maps must be set before turing the online map on for
-	 * this cpu
-	 */
-	set_cpu_sibling_map(smp_processor_id());
-
-	/*
-	 * We need to hold call_lock, so there is no inconsistency
-	 * between the time smp_call_function() determines number of
-	 * IPI recipients, and the time when the determination is made
-	 * for which cpus receive the IPI in genapic_flat.c. Holding this
-	 * lock helps us to not include this cpu in a currently in progress
-	 * smp_call_function().
-	 */
-	lock_ipi_call_lock();
-	spin_lock(&vector_lock);
-
-	/* Setup the per cpu irq handling data structures */
-	__setup_vector_irq(smp_processor_id());
-	/*
-	 * Allow the master to continue.
-	 */
-	cpu_set(smp_processor_id(), cpu_online_map);
-	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
-	spin_unlock(&vector_lock);
-
-	unlock_ipi_call_lock();
-
-	setup_secondary_clock();
-
-	cpu_idle();
-}
-
-extern volatile unsigned long init_rsp;
-extern void (*initial_code)(void);
-
-#ifdef APIC_DEBUG
-static void inquire_remote_apic(int apicid)
-{
-	unsigned i, regs[] = { APIC_ID >> 4, APIC_LVR >> 4, APIC_SPIV >> 4 };
-	char *names[] = { "ID", "VERSION", "SPIV" };
-	int timeout;
-	u32 status;
-
-	printk(KERN_INFO "Inquiring remote APIC #%d...\n", apicid);
-
-	for (i = 0; i < ARRAY_SIZE(regs); i++) {
-		printk(KERN_INFO "... APIC #%d %s: ", apicid, names[i]);
-
-		/*
-		 * Wait for idle.
-		 */
-		status = safe_apic_wait_icr_idle();
-		if (status)
-			printk(KERN_CONT
-			       "a previous APIC delivery may have failed\n");
-
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
-
-		timeout = 0;
-		do {
-			udelay(100);
-			status = apic_read(APIC_ICR) & APIC_ICR_RR_MASK;
-		} while (status == APIC_ICR_RR_INPROG && timeout++ < 1000);
-
-		switch (status) {
-		case APIC_ICR_RR_VALID:
-			status = apic_read(APIC_RRR);
-			printk(KERN_CONT "%08x\n", status);
-			break;
-		default:
-			printk(KERN_CONT "failed\n");
-		}
-	}
-}
-#endif
-
-/*
- * Kick the secondary to wake up.
- */
-static int __cpuinit wakeup_secondary_via_INIT(int phys_apicid, unsigned int start_rip)
-{
-	unsigned long send_status, accept_status = 0;
-	int maxlvt, num_starts, j;
-
-	Dprintk("Asserting INIT.\n");
-
-	/*
-	 * Turn INIT on target chip
-	 */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
-	/*
-	 * Send IPI
-	 */
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
-				| APIC_DM_INIT);
-
-	Dprintk("Waiting for send to finish...\n");
-	send_status = safe_apic_wait_icr_idle();
-
-	mdelay(10);
-
-	Dprintk("Deasserting INIT.\n");
-
-	/* Target chip */
-	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
-	/* Send IPI */
-	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
-
-	Dprintk("Waiting for send to finish...\n");
-	send_status = safe_apic_wait_icr_idle();
-
-	mb();
-	atomic_set(&init_deasserted, 1);
-
-	num_starts = 2;
-
-	/*
-	 * Run STARTUP IPI loop.
-	 */
-	Dprintk("#startup loops: %d.\n", num_starts);
-
-	maxlvt = lapic_get_maxlvt();
-
-	for (j = 1; j <= num_starts; j++) {
-		Dprintk("Sending STARTUP #%d.\n",j);
-		apic_write(APIC_ESR, 0);
-		apic_read(APIC_ESR);
-		Dprintk("After apic_write.\n");
-
-		/*
-		 * STARTUP IPI
-		 */
-
-		/* Target chip */
-		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
-
-		/* Boot on the stack */
-		/* Kick the second */
-		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_rip >> 12));
-
-		/*
-		 * Give the other CPU some time to accept the IPI.
-		 */
-		udelay(300);
-
-		Dprintk("Startup point 1.\n");
-
-		Dprintk("Waiting for send to finish...\n");
-		send_status = safe_apic_wait_icr_idle();
-
-		/*
-		 * Give the other CPU some time to accept the IPI.
-		 */
-		udelay(200);
-		/*
-		 * Due to the Pentium erratum 3AP.
-		 */
-		if (maxlvt > 3) {
-			apic_write(APIC_ESR, 0);
-		}
-		accept_status = (apic_read(APIC_ESR) & 0xEF);
-		if (send_status || accept_status)
-			break;
-	}
-	Dprintk("After Startup.\n");
-
-	if (send_status)
-		printk(KERN_ERR "APIC never delivered???\n");
-	if (accept_status)
-		printk(KERN_ERR "APIC delivery error (%lx).\n", accept_status);
-
-	return (send_status | accept_status);
-}
-
-struct create_idle {
-	struct work_struct work;
-	struct task_struct *idle;
-	struct completion done;
-	int cpu;
-};
-
-static void __cpuinit do_fork_idle(struct work_struct *work)
-{
-	struct create_idle *c_idle =
-		container_of(work, struct create_idle, work);
-
-	c_idle->idle = fork_idle(c_idle->cpu);
-	complete(&c_idle->done);
-}
-
-/*
- * Boot one CPU.
- */
-static int __cpuinit do_boot_cpu(int cpu, int apicid)
-{
-	unsigned long boot_error;
-	int timeout;
-	unsigned long start_rip;
-	struct create_idle c_idle = {
-		.cpu = cpu,
-		.done = COMPLETION_INITIALIZER_ONSTACK(c_idle.done),
-	};
-	INIT_WORK(&c_idle.work, do_fork_idle);
-
-	/* allocate memory for gdts of secondary cpus. Hotplug is considered */
-	if (!cpu_gdt_descr[cpu].address &&
-		!(cpu_gdt_descr[cpu].address = get_zeroed_page(GFP_KERNEL))) {
-		printk(KERN_ERR "Failed to allocate GDT for CPU %d\n", cpu);
-		return -1;
-	}
-
-	/* Allocate node local memory for AP pdas */
-	if (cpu_pda(cpu) == &boot_cpu_pda[cpu]) {
-		struct x8664_pda *newpda, *pda;
-		int node = cpu_to_node(cpu);
-		pda = cpu_pda(cpu);
-		newpda = kmalloc_node(sizeof (struct x8664_pda), GFP_ATOMIC,
-				      node);
-		if (newpda) {
-			memcpy(newpda, pda, sizeof (struct x8664_pda));
-			cpu_pda(cpu) = newpda;
-		} else
-			printk(KERN_ERR
-		"Could not allocate node local PDA for CPU %d on node %d\n",
-				cpu, node);
-	}
-
-	alternatives_smp_switch(1);
-
-	c_idle.idle = get_idle_for_cpu(cpu);
-
-	if (c_idle.idle) {
-		c_idle.idle->thread.sp = (unsigned long) (((struct pt_regs *)
-			(THREAD_SIZE +  task_stack_page(c_idle.idle))) - 1);
-		init_idle(c_idle.idle, cpu);
-		goto do_rest;
-	}
-
-	/*
-	 * During cold boot process, keventd thread is not spun up yet.
-	 * When we do cpu hot-add, we create idle threads on the fly, we should
-	 * not acquire any attributes from the calling context. Hence the clean
-	 * way to create kernel_threads() is to do that from keventd().
-	 * We do the current_is_keventd() due to the fact that ACPI notifier
-	 * was also queuing to keventd() and when the caller is already running
-	 * in context of keventd(), we would end up with locking up the keventd
-	 * thread.
-	 */
-	if (!keventd_up() || current_is_keventd())
-		c_idle.work.func(&c_idle.work);
-	else {
-		schedule_work(&c_idle.work);
-		wait_for_completion(&c_idle.done);
-	}
-
-	if (IS_ERR(c_idle.idle)) {
-		printk("failed fork for CPU %d\n", cpu);
-		return PTR_ERR(c_idle.idle);
-	}
-
-	set_idle_for_cpu(cpu, c_idle.idle);
-
-do_rest:
-
-	cpu_pda(cpu)->pcurrent = c_idle.idle;
-
-	start_rip = setup_trampoline();
-
-	init_rsp = c_idle.idle->thread.sp;
-	load_sp0(&per_cpu(init_tss, cpu), &c_idle.idle->thread);
-	initial_code = start_secondary;
-	clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
-
-	printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
-		cpus_weight(cpu_present_map),
-		apicid);
-
-	/*
-	 * This grunge runs the startup process for
-	 * the targeted processor.
-	 */
-
-	atomic_set(&init_deasserted, 0);
-
-	Dprintk("Setting warm reset code and vector.\n");
-
-	CMOS_WRITE(0xa, 0xf);
-	local_flush_tlb();
-	Dprintk("1.\n");
-	*((volatile unsigned short *) phys_to_virt(0x469)) = start_rip >> 4;
-	Dprintk("2.\n");
-	*((volatile unsigned short *) phys_to_virt(0x467)) = start_rip & 0xf;
-	Dprintk("3.\n");
-
-	/*
-	 * Be paranoid about clearing APIC errors.
-	 */
-	apic_write(APIC_ESR, 0);
-	apic_read(APIC_ESR);
-
-	/*
-	 * Status is now clean
-	 */
-	boot_error = 0;
-
-	/*
-	 * Starting actual IPI sequence...
-	 */
-	boot_error = wakeup_secondary_via_INIT(apicid, start_rip);
-
-	if (!boot_error) {
-		/*
-		 * allow APs to start initializing.
-		 */
-		Dprintk("Before Callout %d.\n", cpu);
-		cpu_set(cpu, cpu_callout_map);
-		Dprintk("After Callout %d.\n", cpu);
-
-		/*
-		 * Wait 5s total for a response
-		 */
-		for (timeout = 0; timeout < 50000; timeout++) {
-			if (cpu_isset(cpu, cpu_callin_map))
-				break;	/* It has booted */
-			udelay(100);
-		}
-
-		if (cpu_isset(cpu, cpu_callin_map)) {
-			/* number CPUs logically, starting from 1 (BSP is 0) */
-			Dprintk("CPU has booted.\n");
-		} else {
-			boot_error = 1;
-			if (*((volatile unsigned char *)phys_to_virt(SMP_TRAMPOLINE_BASE))
-					== 0xA5)
-				/* trampoline started but...? */
-				printk("Stuck ??\n");
-			else
-				/* trampoline code not run */
-				printk("Not responding.\n");
-#ifdef APIC_DEBUG
-			inquire_remote_apic(apicid);
-#endif
-		}
-	}
-	if (boot_error) {
-		cpu_clear(cpu, cpu_callout_map); /* was set here (do_boot_cpu()) */
-		clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */
-		clear_node_cpumask(cpu); /* was set by numa_add_cpu */
-		cpu_clear(cpu, cpu_present_map);
-		cpu_clear(cpu, cpu_possible_map);
-		per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID;
-		return -EIO;
-	}
-
-	return 0;
-}
-
-cycles_t cacheflush_time;
-unsigned long cache_decay_ticks;
-
-/*
- * Cleanup possible dangling ends...
- */
-static __cpuinit void smp_cleanup_boot(void)
-{
-	/*
-	 * Paranoid:  Set warm reset code and vector here back
-	 * to default values.
-	 */
-	CMOS_WRITE(0, 0xf);
-
-	/*
-	 * Reset trampoline flag
-	 */
-	*((volatile int *) phys_to_virt(0x467)) = 0;
-}
-
-/*
- * Fall back to non SMP mode after errors.
- *
- * RED-PEN audit/test this more. I bet there is more state messed up here.
- */
-static __init void disable_smp(void)
-{
-	cpu_present_map = cpumask_of_cpu(0);
-	cpu_possible_map = cpumask_of_cpu(0);
-	if (smp_found_config)
-		phys_cpu_present_map = physid_mask_of_physid(boot_cpu_id);
-	else
-		phys_cpu_present_map = physid_mask_of_physid(0);
-	cpu_set(0, per_cpu(cpu_sibling_map, 0));
-	cpu_set(0, per_cpu(cpu_core_map, 0));
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-int additional_cpus __initdata = -1;
-
-/*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * - Ashok Raj
- *
- * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
- * - The user can overwrite it with additional_cpus=NUM
- * - Otherwise don't reserve additional CPUs.
- * We do this because additional CPUs waste a lot of memory.
- * -AK
- */
-__init void prefill_possible_map(void)
-{
-	int i;
-	int possible;
-
- 	if (additional_cpus == -1) {
- 		if (disabled_cpus > 0)
- 			additional_cpus = disabled_cpus;
- 		else
-			additional_cpus = 0;
- 	}
-	possible = num_processors + additional_cpus;
-	if (possible > NR_CPUS) 
-		possible = NR_CPUS;
-
-	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
-		possible,
-	        max_t(int, possible - num_processors, 0));
-
-	for (i = 0; i < possible; i++)
-		cpu_set(i, cpu_possible_map);
-}
-#endif
-
-/*
- * Various sanity checks.
- */
-static int __init smp_sanity_check(unsigned max_cpus)
-{
-	if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
-		printk("weird, boot CPU (#%d) not listed by the BIOS.\n",
-		       hard_smp_processor_id());
-		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-	}
-
-	/*
-	 * If we couldn't find an SMP configuration at boot time,
-	 * get out of here now!
-	 */
-	if (!smp_found_config) {
-		printk(KERN_NOTICE "SMP motherboard not detected.\n");
-		disable_smp();
-		if (APIC_init_uniprocessor())
-			printk(KERN_NOTICE "Local APIC not detected."
-					   " Using dummy APIC emulation.\n");
-		return -1;
-	}
-
-	/*
-	 * Should not be necessary because the MP table should list the boot
-	 * CPU too, but we do it for the sake of robustness anyway.
-	 */
-	if (!physid_isset(boot_cpu_id, phys_cpu_present_map)) {
-		printk(KERN_NOTICE "weird, boot CPU (#%d) not listed by the BIOS.\n",
-								 boot_cpu_id);
-		physid_set(hard_smp_processor_id(), phys_cpu_present_map);
-	}
-
-	/*
-	 * If we couldn't find a local APIC, then get out of here now!
-	 */
-	if (!cpu_has_apic) {
-		printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
-			boot_cpu_id);
-		printk(KERN_ERR "... forcing use of dummy APIC emulation. (tell your hw vendor)\n");
-		nr_ioapics = 0;
-		return -1;
-	}
-
-	/*
-	 * If SMP should be disabled, then really disable it!
-	 */
-	if (!max_cpus) {
-		printk(KERN_INFO "SMP mode deactivated, forcing use of dummy APIC emulation.\n");
-		nr_ioapics = 0;
-		return -1;
-	}
-
-	return 0;
-}
-
-static void __init smp_cpu_index_default(void)
-{
-	int i;
-	struct cpuinfo_x86 *c;
-
-	for_each_cpu_mask(i, cpu_possible_map) {
-		c = &cpu_data(i);
-		/* mark all to hotplug */
-		c->cpu_index = NR_CPUS;
-	}
-}
-
-/*
- * Prepare for SMP bootup.  The MP table or ACPI has been read
- * earlier.  Just do some sanity checking here and enable APIC mode.
- */
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	nmi_watchdog_default();
-	smp_cpu_index_default();
-	current_cpu_data = boot_cpu_data;
-	current_thread_info()->cpu = 0;  /* needed? */
-	set_cpu_sibling_map(0);
-
-	if (smp_sanity_check(max_cpus) < 0) {
-		printk(KERN_INFO "SMP disabled\n");
-		disable_smp();
-		return;
-	}
-
-
-	/*
-	 * Switch from PIC to APIC mode.
-	 */
-	setup_local_APIC();
-
-	/*
-	 * Enable IO APIC before setting up error vector
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		enable_IO_APIC();
-	end_local_APIC_setup();
-
-	if (GET_APIC_ID(apic_read(APIC_ID)) != boot_cpu_id) {
-		panic("Boot APIC ID in local APIC unexpected (%d vs %d)",
-		      GET_APIC_ID(apic_read(APIC_ID)), boot_cpu_id);
-		/* Or can we switch back to PIC here? */
-	}
-
-	/*
-	 * Now start the IO-APICs
-	 */
-	if (!skip_ioapic_setup && nr_ioapics)
-		setup_IO_APIC();
-	else
-		nr_ioapics = 0;
-
-	/*
-	 * Set up local APIC timer on boot CPU.
-	 */
-
-	setup_boot_clock();
-}
-
-/*
- * Early setup to make printk work.
- */
-void __init smp_prepare_boot_cpu(void)
-{
-	int me = smp_processor_id();
-	/* already set me in cpu_online_map in boot_cpu_init() */
-	cpu_set(me, cpu_callout_map);
-	per_cpu(cpu_state, me) = CPU_ONLINE;
-}
-
-/*
- * Entry point to boot a CPU.
- */
-int __cpuinit __cpu_up(unsigned int cpu)
-{
-	int apicid = cpu_present_to_apicid(cpu);
-	unsigned long flags;
-	int err;
-
-	WARN_ON(irqs_disabled());
-
-	Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
-
-	if (apicid == BAD_APICID || apicid == boot_cpu_id ||
-	    !physid_isset(apicid, phys_cpu_present_map)) {
-		printk("__cpu_up: bad cpu %d\n", cpu);
-		return -EINVAL;
-	}
-
-	/*
-	 * Already booted CPU?
-	 */
- 	if (cpu_isset(cpu, cpu_callin_map)) {
-		Dprintk("do_boot_cpu %d Already started\n", cpu);
- 		return -ENOSYS;
-	}
-
-	/*
-	 * Save current MTRR state in case it was changed since early boot
-	 * (e.g. by the ACPI SMI) to initialize new CPUs with MTRRs in sync:
-	 */
-	mtrr_save_state();
-
-	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-	/* Boot it! */
-	err = do_boot_cpu(cpu, apicid);
-	if (err < 0) {
-		Dprintk("do_boot_cpu failed %d\n", err);
-		return err;
-	}
-
-	/* Unleash the CPU! */
-	Dprintk("waiting for cpu %d\n", cpu);
-
-	/*
-  	 * Make sure and check TSC sync:
- 	 */
-	local_irq_save(flags);
-	check_tsc_sync_source(cpu);
-	local_irq_restore(flags);
-
-	while (!cpu_isset(cpu, cpu_online_map))
-		cpu_relax();
-	err = 0;
-
-	return err;
-}
-
-/*
- * Finish the SMP boot.
- */
-void __init smp_cpus_done(unsigned int max_cpus)
-{
-	smp_cleanup_boot();
-	setup_ioapic_dest();
-	check_nmi_watchdog();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-static void remove_siblinginfo(int cpu)
-{
-	int sibling;
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-
-	for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
-		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
-		/*
-		 * last thread sibling in this cpu core going down
-		 */
-		if (cpus_weight(per_cpu(cpu_sibling_map, cpu)) == 1)
-			cpu_data(sibling).booted_cores--;
-	}
-			
-	for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
-		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
-	cpus_clear(per_cpu(cpu_sibling_map, cpu));
-	cpus_clear(per_cpu(cpu_core_map, cpu));
-	c->phys_proc_id = 0;
-	c->cpu_core_id = 0;
-	cpu_clear(cpu, cpu_sibling_setup_map);
-}
-
-static void __ref remove_cpu_from_maps(void)
-{
-	int cpu = smp_processor_id();
-
-	cpu_clear(cpu, cpu_callout_map);
-	cpu_clear(cpu, cpu_callin_map);
-	clear_bit(cpu, (unsigned long *)&cpu_initialized); /* was set by cpu_init() */
-	clear_node_cpumask(cpu);
-}
-
-int __cpu_disable(void)
-{
-	int cpu = smp_processor_id();
-
-	/*
-	 * Perhaps use cpufreq to drop frequency, but that could go
-	 * into generic code.
- 	 *
-	 * We won't take down the boot processor on i386 due to some
-	 * interrupts only being able to be serviced by the BSP.
-	 * Especially so if we're not using an IOAPIC	-zwane
-	 */
-	if (cpu == 0)
-		return -EBUSY;
-
-	if (nmi_watchdog == NMI_LOCAL_APIC)
-		stop_apic_nmi_watchdog(NULL);
-	clear_local_APIC();
-
-	/*
-	 * HACK:
-	 * Allow any queued timer interrupts to get serviced
-	 * This is only a temporary solution until we cleanup
-	 * fixup_irqs as we do for IA64.
-	 */
-	local_irq_enable();
-	mdelay(1);
-
-	local_irq_disable();
-	remove_siblinginfo(cpu);
-
-	spin_lock(&vector_lock);
-	/* It's now safe to remove this processor from the online map */
-	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&vector_lock);
-	remove_cpu_from_maps();
-	fixup_irqs(cpu_online_map);
-	return 0;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We don't do anything here: idle task is faking death itself. */
-	unsigned int i;
-
-	for (i = 0; i < 10; i++) {
-		/* They ack this in play_dead by setting CPU_DEAD */
-		if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
-			printk ("CPU %d is now offline\n", cpu);
-			if (1 == num_online_cpus())
-				alternatives_smp_switch(0);
-			return;
-		}
-		msleep(100);
-	}
- 	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-}
-
-static __init int setup_additional_cpus(char *s)
-{
-	return s && get_option(&s, &additional_cpus) ? 0 : -EINVAL;
-}
-early_param("additional_cpus", setup_additional_cpus);
-
-#else /* ... !CONFIG_HOTPLUG_CPU */
-
-int __cpu_disable(void)
-{
-	return -ENOSYS;
-}
-
-void __cpu_die(unsigned int cpu)
-{
-	/* We said "no" in __cpu_disable */
-	BUG();
-}
-#endif /* CONFIG_HOTPLUG_CPU */
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
new file mode 100644
index 000000000000..3449064d141a
--- /dev/null
+++ b/arch/x86/kernel/smpcommon.c
@@ -0,0 +1,83 @@
+/*
+ * SMP stuff which is common to all sub-architectures.
+ */
+#include <linux/module.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_X86_32
+DEFINE_PER_CPU(unsigned long, this_cpu_off);
+EXPORT_PER_CPU_SYMBOL(this_cpu_off);
+
+/* Initialize the CPU's GDT.  This is either the boot CPU doing itself
+   (still using the master per-cpu area), or a CPU doing it for a
+   secondary which will soon come up. */
+__cpuinit void init_gdt(int cpu)
+{
+	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
+
+	pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
+			__per_cpu_offset[cpu], 0xFFFFF,
+			0x2 | DESCTYPE_S, 0x8);
+
+	gdt[GDT_ENTRY_PERCPU].s = 1;
+
+	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
+	per_cpu(cpu_number, cpu) = cpu;
+}
+#endif
+
+/**
+ * smp_call_function(): Run a function on all other CPUs.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait (atomically) until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ *
+ * You must not call this function with disabled interrupts or from a
+ * hardware interrupt handler or from a bottom half handler.
+ */
+int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
+		      int wait)
+{
+	return smp_call_function_mask(cpu_online_map, func, info, wait);
+}
+EXPORT_SYMBOL(smp_call_function);
+
+/**
+ * smp_call_function_single - Run a function on a specific CPU
+ * @cpu: The target CPU.  Cannot be the calling CPU.
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Returns 0 on success, else a negative status code.
+ *
+ * If @wait is true, then returns once @func has returned; otherwise
+ * it returns just before the target cpu calls @func.
+ */
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+			     int nonatomic, int wait)
+{
+	/* prevent preemption and reschedule on another processor */
+	int ret;
+	int me = get_cpu();
+	if (cpu == me) {
+		local_irq_disable();
+		func(info);
+		local_irq_enable();
+		put_cpu();
+		return 0;
+	}
+
+	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
+
+	put_cpu();
+	return ret;
+}
+EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
index 8bc38af29aef..8b137891791f 100644
--- a/arch/x86/kernel/smpcommon_32.c
+++ b/arch/x86/kernel/smpcommon_32.c
@@ -1,82 +1 @@
-/*
- * SMP stuff which is common to all sub-architectures.
- */
-#include <linux/module.h>
-#include <asm/smp.h>
 
-DEFINE_PER_CPU(unsigned long, this_cpu_off);
-EXPORT_PER_CPU_SYMBOL(this_cpu_off);
-
-/* Initialize the CPU's GDT.  This is either the boot CPU doing itself
-   (still using the master per-cpu area), or a CPU doing it for a
-   secondary which will soon come up. */
-__cpuinit void init_gdt(int cpu)
-{
-	struct desc_struct *gdt = get_cpu_gdt_table(cpu);
-
-	pack_descriptor(&gdt[GDT_ENTRY_PERCPU],
-			__per_cpu_offset[cpu], 0xFFFFF,
-			0x2 | DESCTYPE_S, 0x8);
-
-	gdt[GDT_ENTRY_PERCPU].s = 1;
-
-	per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu];
-	per_cpu(cpu_number, cpu) = cpu;
-}
-
-
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
-{
-	return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/**
- * smp_call_function_single - Run a function on a specific CPU
- * @cpu: The target CPU.  Cannot be the calling CPU.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
-{
-	/* prevent preemption and reschedule on another processor */
-	int ret;
-	int me = get_cpu();
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
-	put_cpu();
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/srat_32.c b/arch/x86/kernel/srat_32.c
index b72e61359c36..70e4a374b4e8 100644
--- a/arch/x86/kernel/srat_32.c
+++ b/arch/x86/kernel/srat_32.c
@@ -277,14 +277,14 @@ int __init get_memcfg_from_srat(void)
 	rsdp_address = acpi_os_get_root_pointer();
 	if (!rsdp_address) {
 		printk("%s: System description tables not found\n",
-		       __FUNCTION__);
+		       __func__);
 		goto out_err;
 	}
 
-	printk("%s: assigning address to rsdp\n", __FUNCTION__);
+	printk("%s: assigning address to rsdp\n", __func__);
 	rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address;
 	if (!rsdp) {
-		printk("%s: Didn't find ACPI root!\n", __FUNCTION__);
+		printk("%s: Didn't find ACPI root!\n", __func__);
 		goto out_err;
 	}
 
@@ -292,7 +292,7 @@ int __init get_memcfg_from_srat(void)
 		rsdp->oem_id);
 
 	if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) {
-		printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__);
+		printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __func__);
 		goto out_err;
 	}
 
@@ -302,7 +302,7 @@ int __init get_memcfg_from_srat(void)
 	if (!rsdt) {
 		printk(KERN_WARNING
 		       "%s: ACPI: Invalid root system description tables (RSDT)\n",
-		       __FUNCTION__);
+		       __func__);
 		goto out_err;
 	}
 
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 2ef1a5f8d675..92c20fee6781 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -140,12 +140,15 @@ static int enable_single_step(struct task_struct *child)
  */
 static void write_debugctlmsr(struct task_struct *child, unsigned long val)
 {
+	if (child->thread.debugctlmsr == val)
+		return;
+
 	child->thread.debugctlmsr = val;
 
 	if (child != current)
 		return;
 
-	wrmsrl(MSR_IA32_DEBUGCTLMSR, val);
+	update_debugctlmsr(val);
 }
 
 /*
@@ -165,11 +168,11 @@ static void enable_step(struct task_struct *child, bool block)
 		write_debugctlmsr(child,
 				  child->thread.debugctlmsr | DEBUGCTLMSR_BTF);
 	} else {
-	    write_debugctlmsr(child,
-			      child->thread.debugctlmsr & ~TIF_DEBUGCTLMSR);
+		write_debugctlmsr(child,
+				  child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
 
-	    if (!child->thread.debugctlmsr)
-		    clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
+		if (!child->thread.debugctlmsr)
+			clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
 	}
 }
 
@@ -189,7 +192,7 @@ void user_disable_single_step(struct task_struct *child)
 	 * Make sure block stepping (BTF) is disabled.
 	 */
 	write_debugctlmsr(child,
-			  child->thread.debugctlmsr & ~TIF_DEBUGCTLMSR);
+			  child->thread.debugctlmsr & ~DEBUGCTLMSR_BTF);
 
 	if (!child->thread.debugctlmsr)
 		clear_tsk_thread_flag(child, TIF_DEBUGCTLMSR);
diff --git a/arch/x86/kernel/summit_32.c b/arch/x86/kernel/summit_32.c
index 72f463401592..6878a9c2df5d 100644
--- a/arch/x86/kernel/summit_32.c
+++ b/arch/x86/kernel/summit_32.c
@@ -35,43 +35,47 @@ static struct rio_table_hdr *rio_table_hdr __initdata;
 static struct scal_detail   *scal_devs[MAX_NUMNODES] __initdata;
 static struct rio_detail    *rio_devs[MAX_NUMNODES*4] __initdata;
 
+static int mp_bus_id_to_node[MAX_MP_BUSSES] __initdata;
+
 static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 {
 	int twister = 0, node = 0;
 	int i, bus, num_buses;
 
-	for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
-		if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id){
+	for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+		if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) {
 			twister = rio_devs[i]->owner_id;
 			break;
 		}
 	}
-	if (i == rio_table_hdr->num_rio_dev){
-		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __FUNCTION__);
+	if (i == rio_table_hdr->num_rio_dev) {
+		printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__);
 		return last_bus;
 	}
 
-	for(i = 0; i < rio_table_hdr->num_scal_dev; i++){
-		if (scal_devs[i]->node_id == twister){
+	for (i = 0; i < rio_table_hdr->num_scal_dev; i++) {
+		if (scal_devs[i]->node_id == twister) {
 			node = scal_devs[i]->node_id;
 			break;
 		}
 	}
-	if (i == rio_table_hdr->num_scal_dev){
-		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __FUNCTION__);
+	if (i == rio_table_hdr->num_scal_dev) {
+		printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__);
 		return last_bus;
 	}
 
-	switch (rio_devs[wpeg_num]->type){
+	switch (rio_devs[wpeg_num]->type) {
 	case CompatWPEG:
-		/* The Compatibility Winnipeg controls the 2 legacy buses,
+		/*
+		 * The Compatibility Winnipeg controls the 2 legacy buses,
 		 * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case
 		 * a PCI-PCI bridge card is used in either slot: total 5 buses.
 		 */
 		num_buses = 5;
 		break;
 	case AltWPEG:
-		/* The Alternate Winnipeg controls the 2 133MHz buses [1 slot
+		/*
+		 * The Alternate Winnipeg controls the 2 133MHz buses [1 slot
 		 * each], their 2 "extra" buses, the 100MHz bus [2 slots] and
 		 * the "extra" buses for each of those slots: total 7 buses.
 		 */
@@ -79,17 +83,18 @@ static int __init setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus)
 		break;
 	case LookOutAWPEG:
 	case LookOutBWPEG:
-		/* A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
+		/*
+		 * A Lookout Winnipeg controls 3 100MHz buses [2 slots each]
 		 * & the "extra" buses for each of those slots: total 9 buses.
 		 */
 		num_buses = 9;
 		break;
 	default:
-		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __FUNCTION__);
+		printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__);
 		return last_bus;
 	}
 
-	for(bus = last_bus; bus < last_bus + num_buses; bus++)
+	for (bus = last_bus; bus < last_bus + num_buses; bus++)
 		mp_bus_id_to_node[bus] = node;
 	return bus;
 }
@@ -99,14 +104,14 @@ static int __init build_detail_arrays(void)
 	unsigned long ptr;
 	int i, scal_detail_size, rio_detail_size;
 
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
-		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __FUNCTION__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) {
+		printk(KERN_WARNING "%s: MAX_NUMNODES too low!  Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev);
 		return 0;
 	}
 
-	switch (rio_table_hdr->version){
+	switch (rio_table_hdr->version) {
 	default:
-		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __FUNCTION__, rio_table_hdr->version);
+		printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version);
 		return 0;
 	case 2:
 		scal_detail_size = 11;
@@ -119,10 +124,10 @@ static int __init build_detail_arrays(void)
 	}
 
 	ptr = (unsigned long)rio_table_hdr + 3;
-	for(i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
+	for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size)
 		scal_devs[i] = (struct scal_detail *)ptr;
 
-	for(i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
+	for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size)
 		rio_devs[i] = (struct rio_detail *)ptr;
 
 	return 1;
@@ -140,9 +145,9 @@ void __init setup_summit(void)
 
 	rio_table_hdr = NULL;
 	offset = 0x180;
-	while (offset){
+	while (offset) {
 		/* The block id is stored in the 2nd word */
-		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752){
+		if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) {
 			/* set the pointer past the offset & block id */
 			rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4);
 			break;
@@ -150,8 +155,8 @@ void __init setup_summit(void)
 		/* The next offset is stored in the 1st word.  0 means no more */
 		offset = *((unsigned short *)(ptr + offset));
 	}
-	if (!rio_table_hdr){
-		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __FUNCTION__);
+	if (!rio_table_hdr) {
+		printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__);
 		return;
 	}
 
@@ -161,8 +166,8 @@ void __init setup_summit(void)
 	/* The first Winnipeg we're looking for has an index of 0 */
 	next_wpeg = 0;
 	do {
-		for(i = 0; i < rio_table_hdr->num_rio_dev; i++){
-			if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg){
+		for (i = 0; i < rio_table_hdr->num_rio_dev; i++) {
+			if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) {
 				/* It's the Winnipeg we're looking for! */
 				next_bus = setup_pci_node_map_for_wpeg(i, next_bus);
 				next_wpeg++;
diff --git a/arch/x86/kernel/syscall_64.c b/arch/x86/kernel/syscall_64.c
index 9d498c2f8eea..170d43c17487 100644
--- a/arch/x86/kernel/syscall_64.c
+++ b/arch/x86/kernel/syscall_64.c
@@ -1,4 +1,4 @@
-/* System call table for x86-64. */ 
+/* System call table for x86-64. */
 
 #include <linux/linkage.h>
 #include <linux/sys.h>
@@ -7,20 +7,23 @@
 
 #define __NO_STUBS
 
-#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ; 
+#define __SYSCALL(nr, sym) extern asmlinkage void sym(void) ;
 #undef _ASM_X86_64_UNISTD_H_
 #include <asm/unistd_64.h>
 
 #undef __SYSCALL
-#define __SYSCALL(nr, sym) [ nr ] = sym, 
+#define __SYSCALL(nr, sym) [nr] = sym,
 #undef _ASM_X86_64_UNISTD_H_
 
-typedef void (*sys_call_ptr_t)(void); 
+typedef void (*sys_call_ptr_t)(void);
 
 extern void sys_ni_syscall(void);
 
 const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
-	/* Smells like a like a compiler bug -- it doesn't work when the & below is removed. */ 
+	/*
+	*Smells like a like a compiler bug -- it doesn't work
+	*when the & below is removed.
+	*/
 	[0 ... __NR_syscall_max] = &sys_ni_syscall,
 #include <asm/unistd_64.h>
 };
diff --git a/arch/x86/kernel/test_nx.c b/arch/x86/kernel/test_nx.c
index 10b8a6f69f84..787a5e499dd1 100644
--- a/arch/x86/kernel/test_nx.c
+++ b/arch/x86/kernel/test_nx.c
@@ -11,6 +11,8 @@
  */
 #include <linux/module.h>
 #include <linux/sort.h>
+#include <linux/slab.h>
+
 #include <asm/uaccess.h>
 #include <asm/asm.h>
 
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
new file mode 100644
index 000000000000..9bb2363851af
--- /dev/null
+++ b/arch/x86/kernel/tlb_32.c
@@ -0,0 +1,243 @@
+#include <linux/spinlock.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+
+#include <asm/tlbflush.h>
+
+DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate)
+			____cacheline_aligned = { &init_mm, 0, };
+
+/* must come after the send_IPI functions above for inlining */
+#include <mach_ipi.h>
+
+/*
+ *	Smarter SMP flushing macros.
+ *		c/o Linus Torvalds.
+ *
+ *	These mean you can really definitely utterly forget about
+ *	writing to user space from interrupts. (Its not allowed anyway).
+ *
+ *	Optimizations Manfred Spraul <manfred@colorfullife.com>
+ */
+
+static cpumask_t flush_cpumask;
+static struct mm_struct *flush_mm;
+static unsigned long flush_va;
+static DEFINE_SPINLOCK(tlbstate_lock);
+
+/*
+ * We cannot call mmdrop() because we are in interrupt context,
+ * instead update mm->cpu_vm_mask.
+ *
+ * We need to reload %cr3 since the page tables may be going
+ * away from under us..
+ */
+void leave_mm(int cpu)
+{
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK)
+		BUG();
+	cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask);
+	load_cr3(swapper_pg_dir);
+}
+EXPORT_SYMBOL_GPL(leave_mm);
+
+/*
+ *
+ * The flush IPI assumes that a thread switch happens in this order:
+ * [cpu0: the cpu that switches]
+ * 1) switch_mm() either 1a) or 1b)
+ * 1a) thread switch to a different mm
+ * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask);
+ * 	Stop ipi delivery for the old mm. This is not synchronized with
+ * 	the other cpus, but smp_invalidate_interrupt ignore flush ipis
+ * 	for the wrong mm, and in the worst case we perform a superfluous
+ * 	tlb flush.
+ * 1a2) set cpu_tlbstate to TLBSTATE_OK
+ * 	Now the smp_invalidate_interrupt won't call leave_mm if cpu0
+ *	was in lazy tlb mode.
+ * 1a3) update cpu_tlbstate[].active_mm
+ * 	Now cpu0 accepts tlb flushes for the new mm.
+ * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask);
+ * 	Now the other cpus will send tlb flush ipis.
+ * 1a4) change cr3.
+ * 1b) thread switch without mm change
+ *	cpu_tlbstate[].active_mm is correct, cpu0 already handles
+ *	flush ipis.
+ * 1b1) set cpu_tlbstate to TLBSTATE_OK
+ * 1b2) test_and_set the cpu bit in cpu_vm_mask.
+ * 	Atomically set the bit [other cpus will start sending flush ipis],
+ * 	and test the bit.
+ * 1b3) if the bit was 0: leave_mm was called, flush the tlb.
+ * 2) switch %%esp, ie current
+ *
+ * The interrupt must handle 2 special cases:
+ * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm.
+ * - the cpu performs speculative tlb reads, i.e. even if the cpu only
+ *   runs in kernel space, the cpu could load tlb entries for user space
+ *   pages.
+ *
+ * The good news is that cpu_tlbstate is local to each cpu, no
+ * write/read ordering problems.
+ */
+
+/*
+ * TLB flush IPI:
+ *
+ * 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
+ * 2) Leave the mm if we are in the lazy tlb mode.
+ */
+
+void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+	unsigned long cpu;
+
+	cpu = get_cpu();
+
+	if (!cpu_isset(cpu, flush_cpumask))
+		goto out;
+		/*
+		 * This was a BUG() but until someone can quote me the
+		 * line from the intel manual that guarantees an IPI to
+		 * multiple CPUs is retried _only_ on the erroring CPUs
+		 * its staying as a return
+		 *
+		 * BUG();
+		 */
+
+	if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) {
+		if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) {
+			if (flush_va == TLB_FLUSH_ALL)
+				local_flush_tlb();
+			else
+				__flush_tlb_one(flush_va);
+		} else
+			leave_mm(cpu);
+	}
+	ack_APIC_irq();
+	smp_mb__before_clear_bit();
+	cpu_clear(cpu, flush_cpumask);
+	smp_mb__after_clear_bit();
+out:
+	put_cpu_no_resched();
+	__get_cpu_var(irq_stat).irq_tlb_count++;
+}
+
+void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm,
+			     unsigned long va)
+{
+	cpumask_t cpumask = *cpumaskp;
+
+	/*
+	 * A couple of (to be removed) sanity checks:
+	 *
+	 * - current CPU must not be in mask
+	 * - mask must exist :)
+	 */
+	BUG_ON(cpus_empty(cpumask));
+	BUG_ON(cpu_isset(smp_processor_id(), cpumask));
+	BUG_ON(!mm);
+
+#ifdef CONFIG_HOTPLUG_CPU
+	/* If a CPU which we ran on has gone down, OK. */
+	cpus_and(cpumask, cpumask, cpu_online_map);
+	if (unlikely(cpus_empty(cpumask)))
+		return;
+#endif
+
+	/*
+	 * i'm not happy about this global shared spinlock in the
+	 * MM hot path, but we'll see how contended it is.
+	 * AK: x86-64 has a faster method that could be ported.
+	 */
+	spin_lock(&tlbstate_lock);
+
+	flush_mm = mm;
+	flush_va = va;
+	cpus_or(flush_cpumask, cpumask, flush_cpumask);
+	/*
+	 * We have to send the IPI only to
+	 * CPUs affected.
+	 */
+	send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
+
+	while (!cpus_empty(flush_cpumask))
+		/* nothing. lockup detection does not belong here */
+		cpu_relax();
+
+	flush_mm = NULL;
+	flush_va = 0;
+	spin_unlock(&tlbstate_lock);
+}
+
+void flush_tlb_current_task(void)
+{
+	struct mm_struct *mm = current->mm;
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	local_flush_tlb();
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+	preempt_enable();
+}
+
+void flush_tlb_mm(struct mm_struct *mm)
+{
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			local_flush_tlb();
+		else
+			leave_mm(smp_processor_id());
+	}
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL);
+
+	preempt_enable();
+}
+
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
+{
+	struct mm_struct *mm = vma->vm_mm;
+	cpumask_t cpu_mask;
+
+	preempt_disable();
+	cpu_mask = mm->cpu_vm_mask;
+	cpu_clear(smp_processor_id(), cpu_mask);
+
+	if (current->active_mm == mm) {
+		if (current->mm)
+			__flush_tlb_one(va);
+		 else
+			leave_mm(smp_processor_id());
+	}
+
+	if (!cpus_empty(cpu_mask))
+		flush_tlb_others(cpu_mask, mm, va);
+
+	preempt_enable();
+}
+EXPORT_SYMBOL(flush_tlb_page);
+
+static void do_flush_tlb_all(void *info)
+{
+	unsigned long cpu = smp_processor_id();
+
+	__flush_tlb_all();
+	if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY)
+		leave_mm(cpu);
+}
+
+void flush_tlb_all(void)
+{
+	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+}
+
diff --git a/arch/x86/kernel/smp_64.c b/arch/x86/kernel/tlb_64.c
index 2fd74b06db67..1558e513757e 100644
--- a/arch/x86/kernel/smp_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -1,14 +1,3 @@
-/*
- *	Intel SMP support routines.
- *
- *	(c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- *	(c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
- *      (c) 2002,2003 Andi Kleen, SuSE Labs.
- *
- *	This code is released under the GNU General Public License version 2 or
- *	later.
- */
-
 #include <linux/init.h>
 
 #include <linux/mm.h>
@@ -22,12 +11,12 @@
 #include <asm/mtrr.h>
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
-#include <asm/mach_apic.h>
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 #include <asm/apicdef.h>
 #include <asm/idle.h>
 
+#include <mach_ipi.h>
 /*
  *	Smarter SMP flushing macros.
  *		c/o Linus Torvalds.
@@ -228,7 +217,7 @@ void flush_tlb_current_task(void)
 	preempt_enable();
 }
 
-void flush_tlb_mm (struct mm_struct * mm)
+void flush_tlb_mm(struct mm_struct *mm)
 {
 	cpumask_t cpu_mask;
 
@@ -248,7 +237,7 @@ void flush_tlb_mm (struct mm_struct * mm)
 	preempt_enable();
 }
 
-void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
+void flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 {
 	struct mm_struct *mm = vma->vm_mm;
 	cpumask_t cpu_mask;
@@ -258,7 +247,7 @@ void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
 	cpu_clear(smp_processor_id(), cpu_mask);
 
 	if (current->active_mm == mm) {
-		if(current->mm)
+		if (current->mm)
 			__flush_tlb_one(va);
 		else
 			leave_mm(smp_processor_id());
@@ -270,7 +259,7 @@ void flush_tlb_page(struct vm_area_struct * vma, unsigned long va)
 	preempt_enable();
 }
 
-static void do_flush_tlb_all(void* info)
+static void do_flush_tlb_all(void *info)
 {
 	unsigned long cpu = smp_processor_id();
 
@@ -283,248 +272,3 @@ void flush_tlb_all(void)
 {
 	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
 }
-
-/*
- * this function sends a 'reschedule' IPI to another CPU.
- * it goes straight through and wastes no time serializing
- * anything. Worst case is that we lose a reschedule ...
- */
-
-void smp_send_reschedule(int cpu)
-{
-	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
-
-static struct call_data_struct * call_data;
-
-void lock_ipi_call_lock(void)
-{
-	spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-/*
- * this function sends a 'generic call function' IPI to all other CPU
- * of the system defined in the mask.
- */
-static int __smp_call_function_mask(cpumask_t mask,
-				    void (*func)(void *), void *info,
-				    int wait)
-{
-	struct call_data_struct data;
-	cpumask_t allbutself;
-	int cpus;
-
-	allbutself = cpu_online_map;
-	cpu_clear(smp_processor_id(), allbutself);
-
-	cpus_and(mask, mask, allbutself);
-	cpus = cpus_weight(mask);
-
-	if (!cpus)
-		return 0;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	wmb();
-
-	/* Send a message to other CPUs */
-	if (cpus_equal(mask, allbutself))
-		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-	else
-		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (!wait)
-		return 0;
-
-	while (atomic_read(&data.finished) != cpus)
-		cpu_relax();
-
-	return 0;
-}
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * @mask: The set of cpus to run on.  Must not include the current cpu.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function_mask(cpumask_t mask,
-			   void (*func)(void *), void *info,
-			   int wait)
-{
-	int ret;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	spin_lock(&call_lock);
-	ret = __smp_call_function_mask(mask, func, info, wait);
-	spin_unlock(&call_lock);
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_mask);
-
-/*
- * smp_call_function_single - Run a function on a specific CPU
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Currently unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Retrurns 0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
-			      int nonatomic, int wait)
-{
-	/* prevent preemption and reschedule on another processor */
-	int ret, me = get_cpu();
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
-	put_cpu();
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
-/*
- * smp_call_function - run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: currently unused.
- * @wait: If true, wait (atomically) until function has completed on other
- *        CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute func or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- * Actually there are a few legal cases, like panic.
- */
-int smp_call_function (void (*func) (void *info), void *info, int nonatomic,
-			int wait)
-{
-	return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-static void stop_this_cpu(void *dummy)
-{
-	local_irq_disable();
-	/*
-	 * Remove this CPU:
-	 */
-	cpu_clear(smp_processor_id(), cpu_online_map);
-	disable_local_APIC();
-	for (;;)
-		halt();
-}
-
-void smp_send_stop(void)
-{
-	int nolock;
-	unsigned long flags;
-
-	if (reboot_force)
-		return;
-
-	/* Don't deadlock on the call lock in panic */
-	nolock = !spin_trylock(&call_lock);
-	local_irq_save(flags);
-	__smp_call_function_mask(cpu_online_map, stop_this_cpu, NULL, 0);
-	if (!nolock)
-		spin_unlock(&call_lock);
-	disable_local_APIC();
-	local_irq_restore(flags);
-}
-
-/*
- * Reschedule call back. Nothing to do,
- * all the work is done automatically when
- * we return from the interrupt.
- */
-asmlinkage void smp_reschedule_interrupt(void)
-{
-	ack_APIC_irq();
-	add_pda(irq_resched_count, 1);
-}
-
-asmlinkage void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	ack_APIC_irq();
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	exit_idle();
-	irq_enter();
-	(*func)(info);
-	add_pda(irq_call_count, 1);
-	irq_exit();
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
-}
-
diff --git a/arch/x86/kernel/tls.c b/arch/x86/kernel/tls.c
index 022bcaa3b42e..ab6bf375a307 100644
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -92,7 +92,7 @@ int do_set_thread_area(struct task_struct *p, int idx,
 asmlinkage int sys_set_thread_area(struct user_desc __user *u_info)
 {
 	int ret = do_set_thread_area(current, -1, u_info, 1);
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, u_info);
 	return ret;
 }
 
@@ -142,7 +142,7 @@ int do_get_thread_area(struct task_struct *p, int idx,
 asmlinkage int sys_get_thread_area(struct user_desc __user *u_info)
 {
 	int ret = do_get_thread_area(current, -1, u_info);
-	prevent_tail_call(ret);
+	asmlinkage_protect(1, ret, u_info);
 	return ret;
 }
 
diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c
new file mode 100644
index 000000000000..abbf199adebb
--- /dev/null
+++ b/arch/x86/kernel/trampoline.c
@@ -0,0 +1,18 @@
+#include <linux/io.h>
+
+#include <asm/trampoline.h>
+
+/* ready for x86_64, no harm for x86, since it will overwrite after alloc */
+unsigned char *trampoline_base = __va(TRAMPOLINE_BASE);
+
+/*
+ * Currently trivial. Write the real->protected mode
+ * bootstrap into the page concerned. The caller
+ * has made sure it's suitably aligned.
+ */
+unsigned long setup_trampoline(void)
+{
+	memcpy(trampoline_base, trampoline_data,
+	       trampoline_end - trampoline_data);
+	return virt_to_phys(trampoline_base);
+}
diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S
index 4aedd0bcee4c..894293c598db 100644
--- a/arch/x86/kernel/trampoline_64.S
+++ b/arch/x86/kernel/trampoline_64.S
@@ -30,12 +30,7 @@
 #include <asm/msr.h>
 #include <asm/segment.h>
 
-/* We can free up trampoline after bootup if cpu hotplug is not supported. */
-#ifndef CONFIG_HOTPLUG_CPU
-.section .init.data, "aw", @progbits
-#else
 .section .rodata, "a", @progbits
-#endif
 
 .code16
 
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index b22c01e05a18..471e694d6713 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -9,26 +9,28 @@
  * 'Traps.c' handles hardware traps and faults after we have saved some
  * state in 'asm.s'.
  */
-#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kallsyms.h>
+#include <linux/spinlock.h>
+#include <linux/highmem.h>
+#include <linux/kprobes.h>
+#include <linux/uaccess.h>
+#include <linux/utsname.h>
+#include <linux/kdebug.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
 #include <linux/string.h>
+#include <linux/unwind.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
+#include <linux/kexec.h>
+#include <linux/sched.h>
 #include <linux/timer.h>
-#include <linux/mm.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <linux/kallsyms.h>
-#include <linux/ptrace.h>
-#include <linux/utsname.h>
-#include <linux/kprobes.h>
-#include <linux/kexec.h>
-#include <linux/unwind.h>
-#include <linux/uaccess.h>
-#include <linux/nmi.h>
 #include <linux/bug.h>
+#include <linux/nmi.h>
+#include <linux/mm.h>
 
 #ifdef CONFIG_EISA
 #include <linux/ioport.h>
@@ -43,21 +45,18 @@
 #include <linux/edac.h>
 #endif
 
+#include <asm/arch_hooks.h>
+#include <asm/stacktrace.h>
 #include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/atomic.h>
 #include <asm/debugreg.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/unwind.h>
 #include <asm/desc.h>
 #include <asm/i387.h>
 #include <asm/nmi.h>
-#include <asm/unwind.h>
 #include <asm/smp.h>
-#include <asm/arch_hooks.h>
-#include <linux/kdebug.h>
-#include <asm/stacktrace.h>
-
-#include <linux/module.h>
+#include <asm/io.h>
 
 #include "mach_traps.h"
 
@@ -69,7 +68,7 @@ EXPORT_SYMBOL_GPL(used_vectors);
 asmlinkage int system_call(void);
 
 /* Do we ignore FPU interrupts ? */
-char ignore_fpu_irq = 0;
+char ignore_fpu_irq;
 
 /*
  * The IDT has to be page-aligned to simplify the Pentium
@@ -105,12 +104,13 @@ static unsigned int code_bytes = 64;
 void printk_address(unsigned long address, int reliable)
 {
 #ifdef CONFIG_KALLSYMS
-	unsigned long offset = 0, symsize;
+	char namebuf[KSYM_NAME_LEN];
+	unsigned long offset = 0;
+	unsigned long symsize;
 	const char *symname;
-	char *modname;
-	char *delim = ":";
-	char namebuf[128];
 	char reliab[4] = "";
+	char *delim = ":";
+	char *modname;
 
 	symname = kallsyms_lookup(address, &symsize, &offset,
 					&modname, namebuf);
@@ -138,13 +138,14 @@ static inline int valid_stack_ptr(struct thread_info *tinfo, void *p, unsigned s
 
 /* The form of the top of the frame on the stack */
 struct stack_frame {
-	struct stack_frame *next_frame;
-	unsigned long return_address;
+	struct stack_frame	*next_frame;
+	unsigned long		return_address;
 };
 
-static inline unsigned long print_context_stack(struct thread_info *tinfo,
-				unsigned long *stack, unsigned long bp,
-				const struct stacktrace_ops *ops, void *data)
+static inline unsigned long
+print_context_stack(struct thread_info *tinfo,
+		    unsigned long *stack, unsigned long bp,
+		    const struct stacktrace_ops *ops, void *data)
 {
 	struct stack_frame *frame = (struct stack_frame *)bp;
 
@@ -166,7 +167,7 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo,
 	return bp;
 }
 
-#define MSG(msg) ops->warning(data, msg)
+#define MSG(msg)		ops->warning(data, msg)
 
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
 		unsigned long *stack, unsigned long bp,
@@ -177,6 +178,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 
 	if (!stack) {
 		unsigned long dummy;
+
 		stack = &dummy;
 		if (task != current)
 			stack = (unsigned long *)task->thread.sp;
@@ -186,7 +188,7 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 	if (!bp) {
 		if (task == current) {
 			/* Grab bp right from our regs */
-			asm ("movl %%ebp, %0" : "=r" (bp) : );
+			asm("movl %%ebp, %0" : "=r" (bp) :);
 		} else {
 			/* bp is the last reg pushed by switch_to */
 			bp = *(unsigned long *) task->thread.sp;
@@ -196,15 +198,18 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
 
 	while (1) {
 		struct thread_info *context;
+
 		context = (struct thread_info *)
 			((unsigned long)stack & (~(THREAD_SIZE - 1)));
 		bp = print_context_stack(context, stack, bp, ops, data);
-		/* Should be after the line below, but somewhere
-		   in early boot context comes out corrupted and we
-		   can't reference it -AK */
+		/*
+		 * Should be after the line below, but somewhere
+		 * in early boot context comes out corrupted and we
+		 * can't reference it:
+		 */
 		if (ops->stack(data, "IRQ") < 0)
 			break;
-		stack = (unsigned long*)context->previous_esp;
+		stack = (unsigned long *)context->previous_esp;
 		if (!stack)
 			break;
 		touch_nmi_watchdog();
@@ -243,15 +248,15 @@ static void print_trace_address(void *data, unsigned long addr, int reliable)
 }
 
 static const struct stacktrace_ops print_trace_ops = {
-	.warning = print_trace_warning,
-	.warning_symbol = print_trace_warning_symbol,
-	.stack = print_trace_stack,
-	.address = print_trace_address,
+	.warning		= print_trace_warning,
+	.warning_symbol		= print_trace_warning_symbol,
+	.stack			= print_trace_stack,
+	.address		= print_trace_address,
 };
 
 static void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp, char *log_lvl)
+		   unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("%s =======================\n", log_lvl);
@@ -263,21 +268,22 @@ void show_trace(struct task_struct *task, struct pt_regs *regs,
 	show_trace_log_lvl(task, regs, stack, bp, "");
 }
 
-static void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		       unsigned long *sp, unsigned long bp, char *log_lvl)
+static void
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		   unsigned long *sp, unsigned long bp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
 
 	if (sp == NULL) {
 		if (task)
-			sp = (unsigned long*)task->thread.sp;
+			sp = (unsigned long *)task->thread.sp;
 		else
 			sp = (unsigned long *)&sp;
 	}
 
 	stack = sp;
-	for(i = 0; i < kstack_depth_to_print; i++) {
+	for (i = 0; i < kstack_depth_to_print; i++) {
 		if (kstack_end(stack))
 			break;
 		if (i && ((i % 8) == 0))
@@ -285,6 +291,7 @@ static void show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
 		printk("%08lx ", *stack++);
 	}
 	printk("\n%sCall Trace:\n", log_lvl);
+
 	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
@@ -299,8 +306,8 @@ void show_stack(struct task_struct *task, unsigned long *sp)
  */
 void dump_stack(void)
 {
-	unsigned long stack;
 	unsigned long bp = 0;
+	unsigned long stack;
 
 #ifdef CONFIG_FRAME_POINTER
 	if (!bp)
@@ -312,6 +319,7 @@ void dump_stack(void)
 		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
+
 	show_trace(current, NULL, &stack, bp);
 }
 
@@ -323,6 +331,7 @@ void show_registers(struct pt_regs *regs)
 
 	print_modules();
 	__show_registers(regs, 0);
+
 	printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)",
 		TASK_COMM_LEN, current->comm, task_pid_nr(current),
 		current_thread_info(), current, task_thread_info(current));
@@ -331,10 +340,10 @@ void show_registers(struct pt_regs *regs)
 	 * time of the fault..
 	 */
 	if (!user_mode_vm(regs)) {
-		u8 *ip;
 		unsigned int code_prologue = code_bytes * 43 / 64;
 		unsigned int code_len = code_bytes;
 		unsigned char c;
+		u8 *ip;
 
 		printk("\n" KERN_EMERG "Stack: ");
 		show_stack_log_lvl(NULL, regs, &regs->sp, 0, KERN_EMERG);
@@ -361,7 +370,7 @@ void show_registers(struct pt_regs *regs)
 		}
 	}
 	printk("\n");
-}	
+}
 
 int is_valid_bugaddr(unsigned long ip)
 {
@@ -377,10 +386,10 @@ int is_valid_bugaddr(unsigned long ip)
 
 static int die_counter;
 
-int __kprobes __die(const char * str, struct pt_regs * regs, long err)
+int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
-	unsigned long sp;
 	unsigned short ss;
+	unsigned long sp;
 
 	printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter);
 #ifdef CONFIG_PREEMPT
@@ -395,8 +404,8 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err)
 	printk("\n");
 
 	if (notify_die(DIE_OOPS, str, regs, err,
-				current->thread.trap_no, SIGSEGV) !=
-			NOTIFY_STOP) {
+			current->thread.trap_no, SIGSEGV) != NOTIFY_STOP) {
+
 		show_registers(regs);
 		/* Executive summary in case the oops scrolled away */
 		sp = (unsigned long) (&regs->sp);
@@ -408,17 +417,18 @@ int __kprobes __die(const char * str, struct pt_regs * regs, long err)
 		printk(KERN_EMERG "EIP: [<%08lx>] ", regs->ip);
 		print_symbol("%s", regs->ip);
 		printk(" SS:ESP %04x:%08lx\n", ss, sp);
+
 		return 0;
-	} else {
-		return 1;
 	}
+
+	return 1;
 }
 
 /*
- * This is gone through when something in the kernel has done something bad and
- * is about to be terminated.
+ * This is gone through when something in the kernel has done something bad
+ * and is about to be terminated:
  */
-void die(const char * str, struct pt_regs * regs, long err)
+void die(const char *str, struct pt_regs *regs, long err)
 {
 	static struct {
 		raw_spinlock_t lock;
@@ -440,8 +450,9 @@ void die(const char * str, struct pt_regs * regs, long err)
 		die.lock_owner = smp_processor_id();
 		die.lock_owner_depth = 0;
 		bust_spinlocks(1);
-	} else
+	} else {
 		raw_local_irq_save(flags);
+	}
 
 	if (++die.lock_owner_depth < 3) {
 		report_bug(regs->ip, regs);
@@ -474,19 +485,20 @@ void die(const char * str, struct pt_regs * regs, long err)
 	do_exit(SIGSEGV);
 }
 
-static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
+static inline void
+die_if_kernel(const char *str, struct pt_regs *regs, long err)
 {
 	if (!user_mode_vm(regs))
 		die(str, regs, err);
 }
 
-static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
-			      struct pt_regs * regs, long error_code,
-			      siginfo_t *info)
+static void __kprobes
+do_trap(int trapnr, int signr, char *str, int vm86, struct pt_regs *regs,
+	long error_code, siginfo_t *info)
 {
 	struct task_struct *tsk = current;
 
-	if (regs->flags & VM_MASK) {
+	if (regs->flags & X86_VM_MASK) {
 		if (vm86)
 			goto vm86_trap;
 		goto trap_signal;
@@ -495,111 +507,112 @@ static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
 	if (!user_mode(regs))
 		goto kernel_trap;
 
-	trap_signal: {
-		/*
-		 * We want error_code and trap_no set for userspace faults and
-		 * kernelspace faults which result in die(), but not
-		 * kernelspace faults which are fixed up.  die() gives the
-		 * process no chance to handle the signal and notice the
-		 * kernel fault information, so that won't result in polluting
-		 * the information about previously queued, but not yet
-		 * delivered, faults.  See also do_general_protection below.
-		 */
-		tsk->thread.error_code = error_code;
-		tsk->thread.trap_no = trapnr;
+trap_signal:
+	/*
+	 * We want error_code and trap_no set for userspace faults and
+	 * kernelspace faults which result in die(), but not
+	 * kernelspace faults which are fixed up.  die() gives the
+	 * process no chance to handle the signal and notice the
+	 * kernel fault information, so that won't result in polluting
+	 * the information about previously queued, but not yet
+	 * delivered, faults.  See also do_general_protection below.
+	 */
+	tsk->thread.error_code = error_code;
+	tsk->thread.trap_no = trapnr;
 
-		if (info)
-			force_sig_info(signr, info, tsk);
-		else
-			force_sig(signr, tsk);
-		return;
-	}
+	if (info)
+		force_sig_info(signr, info, tsk);
+	else
+		force_sig(signr, tsk);
+	return;
 
-	kernel_trap: {
-		if (!fixup_exception(regs)) {
-			tsk->thread.error_code = error_code;
-			tsk->thread.trap_no = trapnr;
-			die(str, regs, error_code);
-		}
-		return;
+kernel_trap:
+	if (!fixup_exception(regs)) {
+		tsk->thread.error_code = error_code;
+		tsk->thread.trap_no = trapnr;
+		die(str, regs, error_code);
 	}
+	return;
 
-	vm86_trap: {
-		int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr);
-		if (ret) goto trap_signal;
-		return;
-	}
+vm86_trap:
+	if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
+						error_code, trapnr))
+		goto trap_signal;
+	return;
 }
 
-#define DO_ERROR(trapnr, signr, str, name) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-						== NOTIFY_STOP) \
-		return; \
-	do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
+#define DO_ERROR(trapnr, signr, str, name)				\
+void do_##name(struct pt_regs *regs, long error_code)			\
+{									\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+						== NOTIFY_STOP)		\
+		return;							\
+	do_trap(trapnr, signr, str, 0, regs, error_code, NULL);		\
 }
 
-#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	siginfo_t info; \
-	if (irq) \
-		local_irq_enable(); \
-	info.si_signo = signr; \
-	info.si_errno = 0; \
-	info.si_code = sicode; \
-	info.si_addr = (void __user *)siaddr; \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-						== NOTIFY_STOP) \
-		return; \
-	do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
+#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr, irq)	\
+void do_##name(struct pt_regs *regs, long error_code)			\
+{									\
+	siginfo_t info;							\
+	if (irq)							\
+		local_irq_enable();					\
+	info.si_signo = signr;						\
+	info.si_errno = 0;						\
+	info.si_code = sicode;						\
+	info.si_addr = (void __user *)siaddr;				\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+						== NOTIFY_STOP)		\
+		return;							\
+	do_trap(trapnr, signr, str, 0, regs, error_code, &info);	\
 }
 
-#define DO_VM86_ERROR(trapnr, signr, str, name) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-						== NOTIFY_STOP) \
-		return; \
-	do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
+#define DO_VM86_ERROR(trapnr, signr, str, name)				\
+void do_##name(struct pt_regs *regs, long error_code)			\
+{									\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+						== NOTIFY_STOP)		\
+		return;							\
+	do_trap(trapnr, signr, str, 1, regs, error_code, NULL);		\
 }
 
-#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
-void do_##name(struct pt_regs * regs, long error_code) \
-{ \
-	siginfo_t info; \
-	info.si_signo = signr; \
-	info.si_errno = 0; \
-	info.si_code = sicode; \
-	info.si_addr = (void __user *)siaddr; \
-	trace_hardirqs_fixup(); \
-	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
-						== NOTIFY_STOP) \
-		return; \
-	do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
+#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr)	\
+void do_##name(struct pt_regs *regs, long error_code)			\
+{									\
+	siginfo_t info;							\
+	info.si_signo = signr;						\
+	info.si_errno = 0;						\
+	info.si_code = sicode;						\
+	info.si_addr = (void __user *)siaddr;				\
+	trace_hardirqs_fixup();						\
+	if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr)	\
+						== NOTIFY_STOP)		\
+		return;							\
+	do_trap(trapnr, signr, str, 1, regs, error_code, &info);	\
 }
 
-DO_VM86_ERROR_INFO( 0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->ip)
+DO_VM86_ERROR_INFO(0, SIGFPE,  "divide error", divide_error, FPE_INTDIV, regs->ip)
 #ifndef CONFIG_KPROBES
-DO_VM86_ERROR( 3, SIGTRAP, "int3", int3)
+DO_VM86_ERROR(3, SIGTRAP, "int3", int3)
 #endif
-DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow)
-DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds)
-DO_ERROR_INFO( 6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
-DO_ERROR( 9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
+DO_VM86_ERROR(4, SIGSEGV, "overflow", overflow)
+DO_VM86_ERROR(5, SIGSEGV, "bounds", bounds)
+DO_ERROR_INFO(6, SIGILL,  "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip, 0)
+DO_ERROR(9, SIGFPE,  "coprocessor segment overrun", coprocessor_segment_overrun)
 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
 DO_ERROR(11, SIGBUS,  "segment not present", segment_not_present)
 DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0, 0)
 DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0, 1)
 
-void __kprobes do_general_protection(struct pt_regs * regs,
-					      long error_code)
+void __kprobes do_general_protection(struct pt_regs *regs, long error_code)
 {
-	int cpu = get_cpu();
-	struct tss_struct *tss = &per_cpu(init_tss, cpu);
-	struct thread_struct *thread = &current->thread;
+	struct thread_struct *thread;
+	struct tss_struct *tss;
+	int cpu;
+
+	cpu = get_cpu();
+	tss = &per_cpu(init_tss, cpu);
+	thread = &current->thread;
 
 	/*
 	 * Perform the lazy TSS's I/O bitmap copy. If the TSS has an
@@ -616,19 +629,21 @@ void __kprobes do_general_protection(struct pt_regs * regs,
 		 * If the previously set map was extending to higher ports
 		 * than the current one, pad extra space with 0xff (no access).
 		 */
-		if (thread->io_bitmap_max < tss->io_bitmap_max)
+		if (thread->io_bitmap_max < tss->io_bitmap_max) {
 			memset((char *) tss->io_bitmap +
 				thread->io_bitmap_max, 0xff,
 				tss->io_bitmap_max - thread->io_bitmap_max);
+		}
 		tss->io_bitmap_max = thread->io_bitmap_max;
 		tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET;
 		tss->io_bitmap_owner = thread;
 		put_cpu();
+
 		return;
 	}
 	put_cpu();
 
-	if (regs->flags & VM_MASK)
+	if (regs->flags & X86_VM_MASK)
 		goto gp_in_vm86;
 
 	if (!user_mode(regs))
@@ -636,6 +651,7 @@ void __kprobes do_general_protection(struct pt_regs * regs,
 
 	current->thread.error_code = error_code;
 	current->thread.trap_no = 13;
+
 	if (show_unhandled_signals && unhandled_signal(current, SIGSEGV) &&
 	    printk_ratelimit()) {
 		printk(KERN_INFO
@@ -665,22 +681,25 @@ gp_in_kernel:
 	}
 }
 
-static __kprobes void
-mem_parity_error(unsigned char reason, struct pt_regs * regs)
+static notrace __kprobes void
+mem_parity_error(unsigned char reason, struct pt_regs *regs)
 {
-	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
-		"CPU %d.\n", reason, smp_processor_id());
-	printk(KERN_EMERG "You have some hardware problem, likely on the PCI bus.\n");
+	printk(KERN_EMERG
+		"Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+			reason, smp_processor_id());
+
+	printk(KERN_EMERG
+		"You have some hardware problem, likely on the PCI bus.\n");
 
 #if defined(CONFIG_EDAC)
-	if(edac_handler_set()) {
+	if (edac_handler_set()) {
 		edac_atomic_assert_error();
 		return;
 	}
 #endif
 
 	if (panic_on_unrecovered_nmi)
-                panic("NMI: Not continuing");
+		panic("NMI: Not continuing");
 
 	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
 
@@ -688,8 +707,8 @@ mem_parity_error(unsigned char reason, struct pt_regs * regs)
 	clear_mem_error(reason);
 }
 
-static __kprobes void
-io_check_error(unsigned char reason, struct pt_regs * regs)
+static notrace __kprobes void
+io_check_error(unsigned char reason, struct pt_regs *regs)
 {
 	unsigned long i;
 
@@ -699,44 +718,52 @@ io_check_error(unsigned char reason, struct pt_regs * regs)
 	/* Re-enable the IOCK line, wait for a few seconds */
 	reason = (reason & 0xf) | 8;
 	outb(reason, 0x61);
+
 	i = 2000;
-	while (--i) udelay(1000);
+	while (--i)
+		udelay(1000);
+
 	reason &= ~8;
 	outb(reason, 0x61);
 }
 
-static __kprobes void
-unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+static notrace __kprobes void
+unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
 {
+	if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
+		return;
 #ifdef CONFIG_MCA
-	/* Might actually be able to figure out what the guilty party
-	* is. */
-	if( MCA_bus ) {
+	/*
+	 * Might actually be able to figure out what the guilty party
+	 * is:
+	 */
+	if (MCA_bus) {
 		mca_handle_nmi();
 		return;
 	}
 #endif
-	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x on "
-		"CPU %d.\n", reason, smp_processor_id());
+	printk(KERN_EMERG
+		"Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
+			reason, smp_processor_id());
+
 	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
 	if (panic_on_unrecovered_nmi)
-                panic("NMI: Not continuing");
+		panic("NMI: Not continuing");
 
 	printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
 }
 
 static DEFINE_SPINLOCK(nmi_print_lock);
 
-void __kprobes die_nmi(struct pt_regs *regs, const char *msg)
+void notrace __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 {
-	if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) ==
-	    NOTIFY_STOP)
+	if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) == NOTIFY_STOP)
 		return;
 
 	spin_lock(&nmi_print_lock);
 	/*
 	* We are in trouble anyway, lets at least try
-	* to get a message out.
+	* to get a message out:
 	*/
 	bust_spinlocks(1);
 	printk(KERN_EMERG "%s", msg);
@@ -747,9 +774,10 @@ void __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 	spin_unlock(&nmi_print_lock);
 	bust_spinlocks(0);
 
-	/* If we are in kernel we are probably nested up pretty bad
-	 * and might aswell get out now while we still can.
-	*/
+	/*
+	 * If we are in kernel we are probably nested up pretty bad
+	 * and might aswell get out now while we still can:
+	 */
 	if (!user_mode_vm(regs)) {
 		current->thread.trap_no = 2;
 		crash_kexec(regs);
@@ -758,14 +786,14 @@ void __kprobes die_nmi(struct pt_regs *regs, const char *msg)
 	do_exit(SIGSEGV);
 }
 
-static __kprobes void default_do_nmi(struct pt_regs * regs)
+static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
 
-	/* Only the BSP gets external NMIs from the system.  */
+	/* Only the BSP gets external NMIs from the system: */
 	if (!smp_processor_id())
 		reason = get_nmi_reason();
- 
+
 	if (!(reason & 0xc0)) {
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
 							== NOTIFY_STOP)
@@ -778,8 +806,10 @@ static __kprobes void default_do_nmi(struct pt_regs * regs)
 		if (nmi_watchdog_tick(regs, reason))
 			return;
 		if (!do_nmi_callback(regs, smp_processor_id()))
-#endif
 			unknown_nmi_error(reason, regs);
+#else
+		unknown_nmi_error(reason, regs);
+#endif
 
 		return;
 	}
@@ -791,14 +821,14 @@ static __kprobes void default_do_nmi(struct pt_regs * regs)
 		io_check_error(reason, regs);
 	/*
 	 * Reassert NMI in case it became active meanwhile
-	 * as it's edge-triggered.
+	 * as it's edge-triggered:
 	 */
 	reassert_nmi();
 }
 
 static int ignore_nmis;
 
-__kprobes void do_nmi(struct pt_regs * regs, long error_code)
+notrace __kprobes void do_nmi(struct pt_regs *regs, long error_code)
 {
 	int cpu;
 
@@ -834,9 +864,12 @@ void __kprobes do_int3(struct pt_regs *regs, long error_code)
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
 			== NOTIFY_STOP)
 		return;
-	/* This is an interrupt gate, because kprobes wants interrupts
-	disabled.  Normal trap handlers don't. */
+	/*
+	 * This is an interrupt gate, because kprobes wants interrupts
+	 * disabled. Normal trap handlers don't.
+	 */
 	restore_interrupts(regs);
+
 	do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL);
 }
 #endif
@@ -851,7 +884,7 @@ void __kprobes do_int3(struct pt_regs *regs, long error_code)
  * from user space. Such code must not hold kernel locks (since it
  * can equally take a page fault), therefore it is safe to call
  * force_sig_info even though that claims and releases locks.
- * 
+ *
  * Code in ./signal.c ensures that the debug control register
  * is restored before we deliver any signal, and therefore that
  * user code runs with the correct debug control register even though
@@ -863,10 +896,10 @@ void __kprobes do_int3(struct pt_regs *regs, long error_code)
  * find every occurrence of the TF bit that could be saved away even
  * by user code)
  */
-void __kprobes do_debug(struct pt_regs * regs, long error_code)
+void __kprobes do_debug(struct pt_regs *regs, long error_code)
 {
-	unsigned int condition;
 	struct task_struct *tsk = current;
+	unsigned int condition;
 
 	trace_hardirqs_fixup();
 
@@ -891,7 +924,7 @@ void __kprobes do_debug(struct pt_regs * regs, long error_code)
 			goto clear_dr7;
 	}
 
-	if (regs->flags & VM_MASK)
+	if (regs->flags & X86_VM_MASK)
 		goto debug_vm86;
 
 	/* Save debug status register where ptrace can see it */
@@ -914,7 +947,8 @@ void __kprobes do_debug(struct pt_regs * regs, long error_code)
 	/* Ok, finally something we can handle */
 	send_sigtrap(tsk, regs, error_code);
 
-	/* Disable additional traps. They'll be re-enabled when
+	/*
+	 * Disable additional traps. They'll be re-enabled when
 	 * the signal is delivered.
 	 */
 clear_dr7:
@@ -927,7 +961,7 @@ debug_vm86:
 
 clear_TF_reenable:
 	set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
-	regs->flags &= ~TF_MASK;
+	regs->flags &= ~X86_EFLAGS_TF;
 	return;
 }
 
@@ -938,9 +972,10 @@ clear_TF_reenable:
  */
 void math_error(void __user *ip)
 {
-	struct task_struct * task;
+	struct task_struct *task;
+	unsigned short cwd;
+	unsigned short swd;
 	siginfo_t info;
-	unsigned short cwd, swd;
 
 	/*
 	 * Save the info for the exception handler and clear the error.
@@ -966,36 +1001,36 @@ void math_error(void __user *ip)
 	cwd = get_fpu_cwd(task);
 	swd = get_fpu_swd(task);
 	switch (swd & ~cwd & 0x3f) {
-		case 0x000: /* No unmasked exception */
-			return;
-		default:    /* Multiple exceptions */
-			break;
-		case 0x001: /* Invalid Op */
-			/*
-			 * swd & 0x240 == 0x040: Stack Underflow
-			 * swd & 0x240 == 0x240: Stack Overflow
-			 * User must clear the SF bit (0x40) if set
-			 */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
+	case 0x000: /* No unmasked exception */
+		return;
+	default:    /* Multiple exceptions */
+		break;
+	case 0x001: /* Invalid Op */
+		/*
+		 * swd & 0x240 == 0x040: Stack Underflow
+		 * swd & 0x240 == 0x240: Stack Overflow
+		 * User must clear the SF bit (0x40) if set
+		 */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
 	}
 	force_sig_info(SIGFPE, &info, task);
 }
 
-void do_coprocessor_error(struct pt_regs * regs, long error_code)
+void do_coprocessor_error(struct pt_regs *regs, long error_code)
 {
 	ignore_fpu_irq = 1;
 	math_error((void __user *)regs->ip);
@@ -1003,9 +1038,9 @@ void do_coprocessor_error(struct pt_regs * regs, long error_code)
 
 static void simd_math_error(void __user *ip)
 {
-	struct task_struct * task;
-	siginfo_t info;
+	struct task_struct *task;
 	unsigned short mxcsr;
+	siginfo_t info;
 
 	/*
 	 * Save the info for the exception handler and clear the error.
@@ -1026,82 +1061,80 @@ static void simd_math_error(void __user *ip)
 	 */
 	mxcsr = get_fpu_mxcsr(task);
 	switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
-		case 0x000:
-		default:
-			break;
-		case 0x001: /* Invalid Op */
-			info.si_code = FPE_FLTINV;
-			break;
-		case 0x002: /* Denormalize */
-		case 0x010: /* Underflow */
-			info.si_code = FPE_FLTUND;
-			break;
-		case 0x004: /* Zero Divide */
-			info.si_code = FPE_FLTDIV;
-			break;
-		case 0x008: /* Overflow */
-			info.si_code = FPE_FLTOVF;
-			break;
-		case 0x020: /* Precision */
-			info.si_code = FPE_FLTRES;
-			break;
+	case 0x000:
+	default:
+		break;
+	case 0x001: /* Invalid Op */
+		info.si_code = FPE_FLTINV;
+		break;
+	case 0x002: /* Denormalize */
+	case 0x010: /* Underflow */
+		info.si_code = FPE_FLTUND;
+		break;
+	case 0x004: /* Zero Divide */
+		info.si_code = FPE_FLTDIV;
+		break;
+	case 0x008: /* Overflow */
+		info.si_code = FPE_FLTOVF;
+		break;
+	case 0x020: /* Precision */
+		info.si_code = FPE_FLTRES;
+		break;
 	}
 	force_sig_info(SIGFPE, &info, task);
 }
 
-void do_simd_coprocessor_error(struct pt_regs * regs,
-					  long error_code)
+void do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
 {
 	if (cpu_has_xmm) {
 		/* Handle SIMD FPU exceptions on PIII+ processors. */
 		ignore_fpu_irq = 1;
 		simd_math_error((void __user *)regs->ip);
-	} else {
-		/*
-		 * Handle strange cache flush from user space exception
-		 * in all other cases.  This is undocumented behaviour.
-		 */
-		if (regs->flags & VM_MASK) {
-			handle_vm86_fault((struct kernel_vm86_regs *)regs,
-					  error_code);
-			return;
-		}
-		current->thread.trap_no = 19;
-		current->thread.error_code = error_code;
-		die_if_kernel("cache flush denied", regs, error_code);
-		force_sig(SIGSEGV, current);
+		return;
 	}
+	/*
+	 * Handle strange cache flush from user space exception
+	 * in all other cases.  This is undocumented behaviour.
+	 */
+	if (regs->flags & X86_VM_MASK) {
+		handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
+		return;
+	}
+	current->thread.trap_no = 19;
+	current->thread.error_code = error_code;
+	die_if_kernel("cache flush denied", regs, error_code);
+	force_sig(SIGSEGV, current);
 }
 
-void do_spurious_interrupt_bug(struct pt_regs * regs,
-					  long error_code)
+void do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
 {
 #if 0
 	/* No need to warn about this any longer. */
-	printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
+	printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
 #endif
 }
 
-unsigned long patch_espfix_desc(unsigned long uesp,
-					  unsigned long kesp)
+unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp)
 {
 	struct desc_struct *gdt = __get_cpu_var(gdt_page).gdt;
 	unsigned long base = (kesp - uesp) & -THREAD_SIZE;
 	unsigned long new_kesp = kesp - base;
 	unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT;
 	__u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS];
+
 	/* Set up base for espfix segment */
- 	desc &= 0x00f0ff0000000000ULL;
- 	desc |=	((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
+	desc &= 0x00f0ff0000000000ULL;
+	desc |=	((((__u64)base) << 16) & 0x000000ffffff0000ULL) |
 		((((__u64)base) << 32) & 0xff00000000000000ULL) |
 		((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) |
 		(lim_pages & 0xffff);
 	*(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc;
+
 	return new_kesp;
 }
 
 /*
- *  'math_state_restore()' saves the current math information in the
+ * 'math_state_restore()' saves the current math information in the
  * old math state array, and gets the new ones from the current task
  *
  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
@@ -1115,9 +1148,22 @@ asmlinkage void math_state_restore(void)
 	struct thread_info *thread = current_thread_info();
 	struct task_struct *tsk = thread->task;
 
-	clts();		/* Allow maths ops (or we recurse) */
-	if (!tsk_used_math(tsk))
-		init_fpu(tsk);
+	if (!tsk_used_math(tsk)) {
+		local_irq_enable();
+		/*
+		 * does a slab alloc which can sleep
+		 */
+		if (init_fpu(tsk)) {
+			/*
+			 * ran out of memory!
+			 */
+			do_group_exit(SIGKILL);
+			return;
+		}
+		local_irq_disable();
+	}
+
+	clts();				/* Allow maths ops (or we recurse) */
 	restore_fpu(tsk);
 	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
 	tsk->fpu_counter++;
@@ -1128,80 +1174,76 @@ EXPORT_SYMBOL_GPL(math_state_restore);
 
 asmlinkage void math_emulate(long arg)
 {
-	printk(KERN_EMERG "math-emulation not enabled and no coprocessor found.\n");
-	printk(KERN_EMERG "killing %s.\n",current->comm);
-	force_sig(SIGFPE,current);
+	printk(KERN_EMERG
+		"math-emulation not enabled and no coprocessor found.\n");
+	printk(KERN_EMERG "killing %s.\n", current->comm);
+	force_sig(SIGFPE, current);
 	schedule();
 }
 
 #endif /* CONFIG_MATH_EMULATION */
 
-
 void __init trap_init(void)
 {
 	int i;
 
 #ifdef CONFIG_EISA
 	void __iomem *p = early_ioremap(0x0FFFD9, 4);
-	if (readl(p) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
+
+	if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
 		EISA_bus = 1;
-	}
 	early_iounmap(p, 4);
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	init_apic_mappings();
 #endif
-
-	set_trap_gate(0,&divide_error);
-	set_intr_gate(1,&debug);
-	set_intr_gate(2,&nmi);
+	set_trap_gate(0,  &divide_error);
+	set_intr_gate(1,  &debug);
+	set_intr_gate(2,  &nmi);
 	set_system_intr_gate(3, &int3); /* int3/4 can be called from all */
-	set_system_gate(4,&overflow);
-	set_trap_gate(5,&bounds);
-	set_trap_gate(6,&invalid_op);
-	set_trap_gate(7,&device_not_available);
-	set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS);
-	set_trap_gate(9,&coprocessor_segment_overrun);
-	set_trap_gate(10,&invalid_TSS);
-	set_trap_gate(11,&segment_not_present);
-	set_trap_gate(12,&stack_segment);
-	set_trap_gate(13,&general_protection);
-	set_intr_gate(14,&page_fault);
-	set_trap_gate(15,&spurious_interrupt_bug);
-	set_trap_gate(16,&coprocessor_error);
-	set_trap_gate(17,&alignment_check);
+	set_system_gate(4, &overflow);
+	set_trap_gate(5,  &bounds);
+	set_trap_gate(6,  &invalid_op);
+	set_trap_gate(7,  &device_not_available);
+	set_task_gate(8,  GDT_ENTRY_DOUBLEFAULT_TSS);
+	set_trap_gate(9,  &coprocessor_segment_overrun);
+	set_trap_gate(10, &invalid_TSS);
+	set_trap_gate(11, &segment_not_present);
+	set_trap_gate(12, &stack_segment);
+	set_trap_gate(13, &general_protection);
+	set_intr_gate(14, &page_fault);
+	set_trap_gate(15, &spurious_interrupt_bug);
+	set_trap_gate(16, &coprocessor_error);
+	set_trap_gate(17, &alignment_check);
 #ifdef CONFIG_X86_MCE
-	set_trap_gate(18,&machine_check);
+	set_trap_gate(18, &machine_check);
 #endif
-	set_trap_gate(19,&simd_coprocessor_error);
+	set_trap_gate(19, &simd_coprocessor_error);
 
-	/*
-	 * Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned.
-	 * Generate a build-time error if the alignment is wrong.
-	 */
-	BUILD_BUG_ON(offsetof(struct task_struct, thread.i387.fxsave) & 15);
 	if (cpu_has_fxsr) {
 		printk(KERN_INFO "Enabling fast FPU save and restore... ");
 		set_in_cr4(X86_CR4_OSFXSR);
 		printk("done.\n");
 	}
 	if (cpu_has_xmm) {
-		printk(KERN_INFO "Enabling unmasked SIMD FPU exception "
-				"support... ");
+		printk(KERN_INFO
+			"Enabling unmasked SIMD FPU exception support... ");
 		set_in_cr4(X86_CR4_OSXMMEXCPT);
 		printk("done.\n");
 	}
 
-	set_system_gate(SYSCALL_VECTOR,&system_call);
+	set_system_gate(SYSCALL_VECTOR, &system_call);
 
-	/* Reserve all the builtin and the syscall vector. */
+	/* Reserve all the builtin and the syscall vector: */
 	for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
 		set_bit(i, used_vectors);
+
 	set_bit(SYSCALL_VECTOR, used_vectors);
 
+	init_thread_xstate();
 	/*
-	 * Should be a barrier for any external CPU state.
+	 * Should be a barrier for any external CPU state:
 	 */
 	cpu_init();
 
@@ -1211,6 +1253,7 @@ void __init trap_init(void)
 static int __init kstack_setup(char *s)
 {
 	kstack_depth_to_print = simple_strtoul(s, NULL, 0);
+
 	return 1;
 }
 __setup("kstack=", kstack_setup);
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 045466681911..adff76ea97c4 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -33,6 +33,8 @@
 #include <linux/kdebug.h>
 #include <linux/utsname.h>
 
+#include <mach_traps.h>
+
 #if defined(CONFIG_EDAC)
 #include <linux/edac.h>
 #endif
@@ -598,10 +600,16 @@ void die(const char * str, struct pt_regs * regs, long err)
 	oops_end(flags, regs, SIGSEGV);
 }
 
-void __kprobes die_nmi(char *str, struct pt_regs *regs, int do_panic)
+notrace __kprobes void
+die_nmi(char *str, struct pt_regs *regs, int do_panic)
 {
-	unsigned long flags = oops_begin();
+	unsigned long flags;
+
+	if (notify_die(DIE_NMIWATCHDOG, str, regs, 0, 2, SIGINT) ==
+	    NOTIFY_STOP)
+		return;
 
+	flags = oops_begin();
 	/*
 	 * We are in trouble anyway, lets at least try
 	 * to get a message out.
@@ -765,7 +773,7 @@ asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
 	die("general protection fault", regs, error_code);
 }
 
-static __kprobes void
+static notrace __kprobes void
 mem_parity_error(unsigned char reason, struct pt_regs * regs)
 {
 	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
@@ -789,7 +797,7 @@ mem_parity_error(unsigned char reason, struct pt_regs * regs)
 	outb(reason, 0x61);
 }
 
-static __kprobes void
+static notrace __kprobes void
 io_check_error(unsigned char reason, struct pt_regs * regs)
 {
 	printk("NMI: IOCK error (debug interrupt?)\n");
@@ -803,9 +811,11 @@ io_check_error(unsigned char reason, struct pt_regs * regs)
 	outb(reason, 0x61);
 }
 
-static __kprobes void
+static notrace __kprobes void
 unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
 {
+	if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
+		return;
 	printk(KERN_EMERG "Uhhuh. NMI received for unknown reason %02x.\n",
 		reason);
 	printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
@@ -818,7 +828,7 @@ unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
 
 /* Runs on IST stack. This code must keep interrupts off all the time.
    Nested NMIs are prevented by the CPU. */
-asmlinkage __kprobes void default_do_nmi(struct pt_regs *regs)
+asmlinkage notrace  __kprobes void default_do_nmi(struct pt_regs *regs)
 {
 	unsigned char reason = 0;
 	int cpu;
@@ -1114,11 +1124,24 @@ asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void)
 asmlinkage void math_state_restore(void)
 {
 	struct task_struct *me = current;
-	clts();			/* Allow maths ops (or we recurse) */
 
-	if (!used_math())
-		init_fpu(me);
-	restore_fpu_checking(&me->thread.i387.fxsave);
+	if (!used_math()) {
+		local_irq_enable();
+		/*
+		 * does a slab alloc which can sleep
+		 */
+		if (init_fpu(me)) {
+			/*
+			 * ran out of memory!
+			 */
+			do_group_exit(SIGKILL);
+			return;
+		}
+		local_irq_disable();
+	}
+
+	clts();			/* Allow maths ops (or we recurse) */
+	restore_fpu_checking(&me->thread.xstate->fxsave);
 	task_thread_info(me)->status |= TS_USEDFPU;
 	me->fpu_counter++;
 }
@@ -1154,6 +1177,10 @@ void __init trap_init(void)
 #endif
        
 	/*
+	 * initialize the per thread extended state:
+	 */
+        init_thread_xstate();
+	/*
 	 * Should be a barrier for any external CPU state.
 	 */
 	cpu_init();
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index f14cfd9d1f94..e4790728b224 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -84,8 +84,8 @@ DEFINE_PER_CPU(unsigned long, cyc2ns);
 
 static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
 {
-	unsigned long flags, prev_scale, *scale;
 	unsigned long long tsc_now, ns_now;
+	unsigned long flags, *scale;
 
 	local_irq_save(flags);
 	sched_clock_idle_sleep_event();
@@ -95,7 +95,6 @@ static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
 	rdtscll(tsc_now);
 	ns_now = __cycles_2_ns(tsc_now);
 
-	prev_scale = *scale;
 	if (cpu_khz)
 		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
 
@@ -222,9 +221,9 @@ EXPORT_SYMBOL(recalibrate_cpu_khz);
  * if the CPU frequency is scaled, TSC-based delays will need a different
  * loops_per_jiffy value to function properly.
  */
-static unsigned int ref_freq = 0;
-static unsigned long loops_per_jiffy_ref = 0;
-static unsigned long cpu_khz_ref = 0;
+static unsigned int ref_freq;
+static unsigned long loops_per_jiffy_ref;
+static unsigned long cpu_khz_ref;
 
 static int
 time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
@@ -256,9 +255,7 @@ time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
 						ref_freq, freq->new);
 			if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
 				tsc_khz = cpu_khz;
-				preempt_disable();
-				set_cyc2ns_scale(cpu_khz, smp_processor_id());
-				preempt_enable();
+				set_cyc2ns_scale(cpu_khz, freq->cpu);
 				/*
 				 * TSC based sched_clock turns
 				 * to junk w/ cpufreq
@@ -286,15 +283,28 @@ core_initcall(cpufreq_tsc);
 
 /* clock source code */
 
-static unsigned long current_tsc_khz = 0;
+static unsigned long current_tsc_khz;
+static struct clocksource clocksource_tsc;
 
+/*
+ * We compare the TSC to the cycle_last value in the clocksource
+ * structure to avoid a nasty time-warp issue. This can be observed in
+ * a very small window right after one CPU updated cycle_last under
+ * xtime lock and the other CPU reads a TSC value which is smaller
+ * than the cycle_last reference value due to a TSC which is slighty
+ * behind. This delta is nowhere else observable, but in that case it
+ * results in a forward time jump in the range of hours due to the
+ * unsigned delta calculation of the time keeping core code, which is
+ * necessary to support wrapping clocksources like pm timer.
+ */
 static cycle_t read_tsc(void)
 {
 	cycle_t ret;
 
 	rdtscll(ret);
 
-	return ret;
+	return ret >= clocksource_tsc.cycle_last ?
+		ret : clocksource_tsc.cycle_last;
 }
 
 static struct clocksource clocksource_tsc = {
@@ -394,13 +404,15 @@ void __init tsc_init(void)
 	int cpu;
 
 	if (!cpu_has_tsc)
-		goto out_no_tsc;
+		return;
 
 	cpu_khz = calculate_cpu_khz();
 	tsc_khz = cpu_khz;
 
-	if (!cpu_khz)
-		goto out_no_tsc;
+	if (!cpu_khz) {
+		mark_tsc_unstable("could not calculate TSC khz");
+		return;
+	}
 
 	printk("Detected %lu.%03lu MHz processor.\n",
 				(unsigned long)cpu_khz / 1000,
@@ -433,9 +445,4 @@ void __init tsc_init(void)
 		tsc_enabled = 1;
 
 	clocksource_register(&clocksource_tsc);
-
-	return;
-
-out_no_tsc:
-	setup_clear_cpu_cap(X86_FEATURE_TSC);
 }
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index 947554ddabb6..fcc16e58609e 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -11,6 +11,7 @@
 #include <asm/hpet.h>
 #include <asm/timex.h>
 #include <asm/timer.h>
+#include <asm/vgtod.h>
 
 static int notsc __initdata = 0;
 
@@ -44,8 +45,8 @@ DEFINE_PER_CPU(unsigned long, cyc2ns);
 
 static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
 {
-	unsigned long flags, prev_scale, *scale;
 	unsigned long long tsc_now, ns_now;
+	unsigned long flags, *scale;
 
 	local_irq_save(flags);
 	sched_clock_idle_sleep_event();
@@ -55,7 +56,6 @@ static void set_cyc2ns_scale(unsigned long cpu_khz, int cpu)
 	rdtscll(tsc_now);
 	ns_now = __cycles_2_ns(tsc_now);
 
-	prev_scale = *scale;
 	if (cpu_khz)
 		*scale = (NSEC_PER_MSEC << CYC2NS_SCALE_FACTOR)/cpu_khz;
 
@@ -148,9 +148,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	preempt_disable();
-	set_cyc2ns_scale(tsc_khz_ref, smp_processor_id());
-	preempt_enable();
+	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
 
 	return 0;
 }
@@ -290,18 +288,34 @@ int __init notsc_setup(char *s)
 
 __setup("notsc", notsc_setup);
 
+static struct clocksource clocksource_tsc;
 
-/* clock source code: */
+/*
+ * We compare the TSC to the cycle_last value in the clocksource
+ * structure to avoid a nasty time-warp. This can be observed in a
+ * very small window right after one CPU updated cycle_last under
+ * xtime/vsyscall_gtod lock and the other CPU reads a TSC value which
+ * is smaller than the cycle_last reference value due to a TSC which
+ * is slighty behind. This delta is nowhere else observable, but in
+ * that case it results in a forward time jump in the range of hours
+ * due to the unsigned delta calculation of the time keeping core
+ * code, which is necessary to support wrapping clocksources like pm
+ * timer.
+ */
 static cycle_t read_tsc(void)
 {
 	cycle_t ret = (cycle_t)get_cycles();
-	return ret;
+
+	return ret >= clocksource_tsc.cycle_last ?
+		ret : clocksource_tsc.cycle_last;
 }
 
 static cycle_t __vsyscall_fn vread_tsc(void)
 {
 	cycle_t ret = (cycle_t)vget_cycles();
-	return ret;
+
+	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
+		ret : __vsyscall_gtod_data.clock.cycle_last;
 }
 
 static struct clocksource clocksource_tsc = {
diff --git a/arch/x86/kernel/vm86_32.c b/arch/x86/kernel/vm86_32.c
index 738c2104df30..38f566fa27d2 100644
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -64,7 +64,7 @@
 
 
 #define KVM86	((struct kernel_vm86_struct *)regs)
-#define VMPI 	KVM86->vm86plus
+#define VMPI	KVM86->vm86plus
 
 
 /*
@@ -81,7 +81,7 @@
 #define VFLAGS	(*(unsigned short *)&(current->thread.v86flags))
 #define VEFLAGS	(current->thread.v86flags)
 
-#define set_flags(X,new,mask) \
+#define set_flags(X, new, mask) \
 ((X) = ((X) & ~(mask)) | ((new) & (mask)))
 
 #define SAFE_MASK	(0xDD5)
@@ -93,8 +93,10 @@ static int copy_vm86_regs_to_user(struct vm86_regs __user *user,
 {
 	int ret = 0;
 
-	/* kernel_vm86_regs is missing gs, so copy everything up to
-	   (but not including) orig_eax, and then rest including orig_eax. */
+	/*
+	 * kernel_vm86_regs is missing gs, so copy everything up to
+	 * (but not including) orig_eax, and then rest including orig_eax.
+	 */
 	ret += copy_to_user(user, regs, offsetof(struct kernel_vm86_regs, pt.orig_ax));
 	ret += copy_to_user(&user->orig_eax, &regs->pt.orig_ax,
 			    sizeof(struct kernel_vm86_regs) -
@@ -120,7 +122,7 @@ static int copy_vm86_regs_from_user(struct kernel_vm86_regs *regs,
 	return ret;
 }
 
-struct pt_regs * save_v86_state(struct kernel_vm86_regs * regs)
+struct pt_regs *save_v86_state(struct kernel_vm86_regs *regs)
 {
 	struct tss_struct *tss;
 	struct pt_regs *ret;
@@ -137,9 +139,9 @@ struct pt_regs * save_v86_state(struct kernel_vm86_regs * regs)
 		printk("no vm86_info: BAD\n");
 		do_exit(SIGSEGV);
 	}
-	set_flags(regs->pt.flags, VEFLAGS, VIF_MASK | current->thread.v86mask);
-	tmp = copy_vm86_regs_to_user(&current->thread.vm86_info->regs,regs);
-	tmp += put_user(current->thread.screen_bitmap,&current->thread.vm86_info->screen_bitmap);
+	set_flags(regs->pt.flags, VEFLAGS, X86_EFLAGS_VIF | current->thread.v86mask);
+	tmp = copy_vm86_regs_to_user(&current->thread.vm86_info->regs, regs);
+	tmp += put_user(current->thread.screen_bitmap, &current->thread.vm86_info->screen_bitmap);
 	if (tmp) {
 		printk("vm86: could not access userspace vm86_info\n");
 		do_exit(SIGSEGV);
@@ -237,20 +239,21 @@ asmlinkage int sys_vm86(struct pt_regs regs)
 
 	tsk = current;
 	switch (regs.bx) {
-		case VM86_REQUEST_IRQ:
-		case VM86_FREE_IRQ:
-		case VM86_GET_IRQ_BITS:
-		case VM86_GET_AND_RESET_IRQ:
-			ret = do_vm86_irq_handling(regs.bx, (int)regs.cx);
-			goto out;
-		case VM86_PLUS_INSTALL_CHECK:
-			/* NOTE: on old vm86 stuff this will return the error
-			   from access_ok(), because the subfunction is
-			   interpreted as (invalid) address to vm86_struct.
-			   So the installation check works.
-			 */
-			ret = 0;
-			goto out;
+	case VM86_REQUEST_IRQ:
+	case VM86_FREE_IRQ:
+	case VM86_GET_IRQ_BITS:
+	case VM86_GET_AND_RESET_IRQ:
+		ret = do_vm86_irq_handling(regs.bx, (int)regs.cx);
+		goto out;
+	case VM86_PLUS_INSTALL_CHECK:
+		/*
+		 * NOTE: on old vm86 stuff this will return the error
+		 *  from access_ok(), because the subfunction is
+		 *  interpreted as (invalid) address to vm86_struct.
+		 *  So the installation check works.
+		 */
+		ret = 0;
+		goto out;
 	}
 
 	/* we come here only for functions VM86_ENTER, VM86_ENTER_NO_BYPASS */
@@ -296,21 +299,21 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 	VEFLAGS = info->regs.pt.flags;
 	info->regs.pt.flags &= SAFE_MASK;
 	info->regs.pt.flags |= info->regs32->flags & ~SAFE_MASK;
-	info->regs.pt.flags |= VM_MASK;
+	info->regs.pt.flags |= X86_VM_MASK;
 
 	switch (info->cpu_type) {
-		case CPU_286:
-			tsk->thread.v86mask = 0;
-			break;
-		case CPU_386:
-			tsk->thread.v86mask = NT_MASK | IOPL_MASK;
-			break;
-		case CPU_486:
-			tsk->thread.v86mask = AC_MASK | NT_MASK | IOPL_MASK;
-			break;
-		default:
-			tsk->thread.v86mask = ID_MASK | AC_MASK | NT_MASK | IOPL_MASK;
-			break;
+	case CPU_286:
+		tsk->thread.v86mask = 0;
+		break;
+	case CPU_386:
+		tsk->thread.v86mask = X86_EFLAGS_NT | X86_EFLAGS_IOPL;
+		break;
+	case CPU_486:
+		tsk->thread.v86mask = X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL;
+		break;
+	default:
+		tsk->thread.v86mask = X86_EFLAGS_ID | X86_EFLAGS_AC | X86_EFLAGS_NT | X86_EFLAGS_IOPL;
+		break;
 	}
 
 /*
@@ -346,9 +349,9 @@ static void do_sys_vm86(struct kernel_vm86_struct *info, struct task_struct *tsk
 	/* we never return here */
 }
 
-static inline void return_to_32bit(struct kernel_vm86_regs * regs16, int retval)
+static inline void return_to_32bit(struct kernel_vm86_regs *regs16, int retval)
 {
-	struct pt_regs * regs32;
+	struct pt_regs *regs32;
 
 	regs32 = save_v86_state(regs16);
 	regs32->ax = retval;
@@ -358,29 +361,30 @@ static inline void return_to_32bit(struct kernel_vm86_regs * regs16, int retval)
 		: : "r" (regs32), "r" (current_thread_info()));
 }
 
-static inline void set_IF(struct kernel_vm86_regs * regs)
+static inline void set_IF(struct kernel_vm86_regs *regs)
 {
-	VEFLAGS |= VIF_MASK;
-	if (VEFLAGS & VIP_MASK)
+	VEFLAGS |= X86_EFLAGS_VIF;
+	if (VEFLAGS & X86_EFLAGS_VIP)
 		return_to_32bit(regs, VM86_STI);
 }
 
-static inline void clear_IF(struct kernel_vm86_regs * regs)
+static inline void clear_IF(struct kernel_vm86_regs *regs)
 {
-	VEFLAGS &= ~VIF_MASK;
+	VEFLAGS &= ~X86_EFLAGS_VIF;
 }
 
-static inline void clear_TF(struct kernel_vm86_regs * regs)
+static inline void clear_TF(struct kernel_vm86_regs *regs)
 {
-	regs->pt.flags &= ~TF_MASK;
+	regs->pt.flags &= ~X86_EFLAGS_TF;
 }
 
-static inline void clear_AC(struct kernel_vm86_regs * regs)
+static inline void clear_AC(struct kernel_vm86_regs *regs)
 {
-	regs->pt.flags &= ~AC_MASK;
+	regs->pt.flags &= ~X86_EFLAGS_AC;
 }
 
-/* It is correct to call set_IF(regs) from the set_vflags_*
+/*
+ * It is correct to call set_IF(regs) from the set_vflags_*
  * functions. However someone forgot to call clear_IF(regs)
  * in the opposite case.
  * After the command sequence CLI PUSHF STI POPF you should
@@ -391,41 +395,41 @@ static inline void clear_AC(struct kernel_vm86_regs * regs)
  * [KD]
  */
 
-static inline void set_vflags_long(unsigned long flags, struct kernel_vm86_regs * regs)
+static inline void set_vflags_long(unsigned long flags, struct kernel_vm86_regs *regs)
 {
 	set_flags(VEFLAGS, flags, current->thread.v86mask);
 	set_flags(regs->pt.flags, flags, SAFE_MASK);
-	if (flags & IF_MASK)
+	if (flags & X86_EFLAGS_IF)
 		set_IF(regs);
 	else
 		clear_IF(regs);
 }
 
-static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs * regs)
+static inline void set_vflags_short(unsigned short flags, struct kernel_vm86_regs *regs)
 {
 	set_flags(VFLAGS, flags, current->thread.v86mask);
 	set_flags(regs->pt.flags, flags, SAFE_MASK);
-	if (flags & IF_MASK)
+	if (flags & X86_EFLAGS_IF)
 		set_IF(regs);
 	else
 		clear_IF(regs);
 }
 
-static inline unsigned long get_vflags(struct kernel_vm86_regs * regs)
+static inline unsigned long get_vflags(struct kernel_vm86_regs *regs)
 {
 	unsigned long flags = regs->pt.flags & RETURN_MASK;
 
-	if (VEFLAGS & VIF_MASK)
-		flags |= IF_MASK;
-	flags |= IOPL_MASK;
+	if (VEFLAGS & X86_EFLAGS_VIF)
+		flags |= X86_EFLAGS_IF;
+	flags |= X86_EFLAGS_IOPL;
 	return flags | (VEFLAGS & current->thread.v86mask);
 }
 
-static inline int is_revectored(int nr, struct revectored_struct * bitmap)
+static inline int is_revectored(int nr, struct revectored_struct *bitmap)
 {
 	__asm__ __volatile__("btl %2,%1\n\tsbbl %0,%0"
 		:"=r" (nr)
-		:"m" (*bitmap),"r" (nr));
+		:"m" (*bitmap), "r" (nr));
 	return nr;
 }
 
@@ -437,7 +441,7 @@ static inline int is_revectored(int nr, struct revectored_struct * bitmap)
 		ptr--; \
 		if (put_user(__val, base + ptr) < 0) \
 			goto err_label; \
-	} while(0)
+	} while (0)
 
 #define pushw(base, ptr, val, err_label) \
 	do { \
@@ -448,7 +452,7 @@ static inline int is_revectored(int nr, struct revectored_struct * bitmap)
 		ptr--; \
 		if (put_user(val_byte(__val, 0), base + ptr) < 0) \
 			goto err_label; \
-	} while(0)
+	} while (0)
 
 #define pushl(base, ptr, val, err_label) \
 	do { \
@@ -465,7 +469,7 @@ static inline int is_revectored(int nr, struct revectored_struct * bitmap)
 		ptr--; \
 		if (put_user(val_byte(__val, 0), base + ptr) < 0) \
 			goto err_label; \
-	} while(0)
+	} while (0)
 
 #define popb(base, ptr, err_label) \
 	({ \
@@ -512,7 +516,7 @@ static inline int is_revectored(int nr, struct revectored_struct * bitmap)
  * in userspace is always better than an Oops anyway.) [KD]
  */
 static void do_int(struct kernel_vm86_regs *regs, int i,
-    unsigned char __user * ssp, unsigned short sp)
+    unsigned char __user *ssp, unsigned short sp)
 {
 	unsigned long __user *intr_ptr;
 	unsigned long segoffs;
@@ -521,7 +525,7 @@ static void do_int(struct kernel_vm86_regs *regs, int i,
 		goto cannot_handle;
 	if (is_revectored(i, &KVM86->int_revectored))
 		goto cannot_handle;
-	if (i==0x21 && is_revectored(AH(regs),&KVM86->int21_revectored))
+	if (i == 0x21 && is_revectored(AH(regs), &KVM86->int21_revectored))
 		goto cannot_handle;
 	intr_ptr = (unsigned long __user *) (i << 2);
 	if (get_user(segoffs, intr_ptr))
@@ -543,30 +547,23 @@ cannot_handle:
 	return_to_32bit(regs, VM86_INTx + (i << 8));
 }
 
-int handle_vm86_trap(struct kernel_vm86_regs * regs, long error_code, int trapno)
+int handle_vm86_trap(struct kernel_vm86_regs *regs, long error_code, int trapno)
 {
 	if (VMPI.is_vm86pus) {
-		if ( (trapno==3) || (trapno==1) )
+		if ((trapno == 3) || (trapno == 1))
 			return_to_32bit(regs, VM86_TRAP + (trapno << 8));
 		do_int(regs, trapno, (unsigned char __user *) (regs->pt.ss << 4), SP(regs));
 		return 0;
 	}
-	if (trapno !=1)
+	if (trapno != 1)
 		return 1; /* we let this handle by the calling routine */
-	if (current->ptrace & PT_PTRACED) {
-		unsigned long flags;
-		spin_lock_irqsave(&current->sighand->siglock, flags);
-		sigdelset(&current->blocked, SIGTRAP);
-		recalc_sigpending();
-		spin_unlock_irqrestore(&current->sighand->siglock, flags);
-	}
-	send_sig(SIGTRAP, current, 1);
 	current->thread.trap_no = trapno;
 	current->thread.error_code = error_code;
+	force_sig(SIGTRAP, current);
 	return 0;
 }
 
-void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
+void handle_vm86_fault(struct kernel_vm86_regs *regs, long error_code)
 {
 	unsigned char opcode;
 	unsigned char __user *csp;
@@ -576,11 +573,11 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
 
 #define CHECK_IF_IN_TRAP \
 	if (VMPI.vm86dbg_active && VMPI.vm86dbg_TFpendig) \
-		newflags |= TF_MASK
+		newflags |= X86_EFLAGS_TF
 #define VM86_FAULT_RETURN do { \
-	if (VMPI.force_return_for_pic  && (VEFLAGS & (IF_MASK | VIF_MASK))) \
+	if (VMPI.force_return_for_pic  && (VEFLAGS & (X86_EFLAGS_IF | X86_EFLAGS_VIF))) \
 		return_to_32bit(regs, VM86_PICRETURN); \
-	if (orig_flags & TF_MASK) \
+	if (orig_flags & X86_EFLAGS_TF) \
 		handle_vm86_trap(regs, 0, 1); \
 	return; } while (0)
 
@@ -595,17 +592,17 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
 	pref_done = 0;
 	do {
 		switch (opcode = popb(csp, ip, simulate_sigsegv)) {
-			case 0x66:      /* 32-bit data */     data32=1; break;
-			case 0x67:      /* 32-bit address */  break;
-			case 0x2e:      /* CS */              break;
-			case 0x3e:      /* DS */              break;
-			case 0x26:      /* ES */              break;
-			case 0x36:      /* SS */              break;
-			case 0x65:      /* GS */              break;
-			case 0x64:      /* FS */              break;
-			case 0xf2:      /* repnz */       break;
-			case 0xf3:      /* rep */             break;
-			default: pref_done = 1;
+		case 0x66:      /* 32-bit data */     data32 = 1; break;
+		case 0x67:      /* 32-bit address */  break;
+		case 0x2e:      /* CS */              break;
+		case 0x3e:      /* DS */              break;
+		case 0x26:      /* ES */              break;
+		case 0x36:      /* SS */              break;
+		case 0x65:      /* GS */              break;
+		case 0x64:      /* FS */              break;
+		case 0xf2:      /* repnz */       break;
+		case 0xf3:      /* rep */             break;
+		default: pref_done = 1;
 		}
 	} while (!pref_done);
 
@@ -628,7 +625,7 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
 		{
 		unsigned long newflags;
 		if (data32) {
-			newflags=popl(ssp, sp, simulate_sigsegv);
+			newflags = popl(ssp, sp, simulate_sigsegv);
 			SP(regs) += 4;
 		} else {
 			newflags = popw(ssp, sp, simulate_sigsegv);
@@ -636,20 +633,20 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
 		}
 		IP(regs) = ip;
 		CHECK_IF_IN_TRAP;
-		if (data32) {
+		if (data32)
 			set_vflags_long(newflags, regs);
-		} else {
+		else
 			set_vflags_short(newflags, regs);
-		}
+
 		VM86_FAULT_RETURN;
 		}
 
 	/* int xx */
 	case 0xcd: {
-		int intno=popb(csp, ip, simulate_sigsegv);
+		int intno = popb(csp, ip, simulate_sigsegv);
 		IP(regs) = ip;
 		if (VMPI.vm86dbg_active) {
-			if ( (1 << (intno &7)) & VMPI.vm86dbg_intxxtab[intno >> 3] )
+			if ((1 << (intno & 7)) & VMPI.vm86dbg_intxxtab[intno >> 3])
 				return_to_32bit(regs, VM86_INTx + (intno << 8));
 		}
 		do_int(regs, intno, ssp, sp);
@@ -663,9 +660,9 @@ void handle_vm86_fault(struct kernel_vm86_regs * regs, long error_code)
 		unsigned long newcs;
 		unsigned long newflags;
 		if (data32) {
-			newip=popl(ssp, sp, simulate_sigsegv);
-			newcs=popl(ssp, sp, simulate_sigsegv);
-			newflags=popl(ssp, sp, simulate_sigsegv);
+			newip = popl(ssp, sp, simulate_sigsegv);
+			newcs = popl(ssp, sp, simulate_sigsegv);
+			newflags = popl(ssp, sp, simulate_sigsegv);
 			SP(regs) += 12;
 		} else {
 			newip = popw(ssp, sp, simulate_sigsegv);
@@ -734,18 +731,18 @@ static struct vm86_irqs {
 static DEFINE_SPINLOCK(irqbits_lock);
 static int irqbits;
 
-#define ALLOWED_SIGS ( 1 /* 0 = don't send a signal */ \
+#define ALLOWED_SIGS (1 /* 0 = don't send a signal */ \
 	| (1 << SIGUSR1) | (1 << SIGUSR2) | (1 << SIGIO)  | (1 << SIGURG) \
-	| (1 << SIGUNUSED) )
-	
+	| (1 << SIGUNUSED))
+
 static irqreturn_t irq_handler(int intno, void *dev_id)
 {
 	int irq_bit;
 	unsigned long flags;
 
-	spin_lock_irqsave(&irqbits_lock, flags);	
+	spin_lock_irqsave(&irqbits_lock, flags);
 	irq_bit = 1 << intno;
-	if ((irqbits & irq_bit) || ! vm86_irqs[intno].tsk)
+	if ((irqbits & irq_bit) || !vm86_irqs[intno].tsk)
 		goto out;
 	irqbits |= irq_bit;
 	if (vm86_irqs[intno].sig)
@@ -759,7 +756,7 @@ static irqreturn_t irq_handler(int intno, void *dev_id)
 	return IRQ_HANDLED;
 
 out:
-	spin_unlock_irqrestore(&irqbits_lock, flags);	
+	spin_unlock_irqrestore(&irqbits_lock, flags);
 	return IRQ_NONE;
 }
 
@@ -770,9 +767,9 @@ static inline void free_vm86_irq(int irqnumber)
 	free_irq(irqnumber, NULL);
 	vm86_irqs[irqnumber].tsk = NULL;
 
-	spin_lock_irqsave(&irqbits_lock, flags);	
+	spin_lock_irqsave(&irqbits_lock, flags);
 	irqbits &= ~(1 << irqnumber);
-	spin_unlock_irqrestore(&irqbits_lock, flags);	
+	spin_unlock_irqrestore(&irqbits_lock, flags);
 }
 
 void release_vm86_irqs(struct task_struct *task)
@@ -788,10 +785,10 @@ static inline int get_and_reset_irq(int irqnumber)
 	int bit;
 	unsigned long flags;
 	int ret = 0;
-	
+
 	if (invalid_vm86_irq(irqnumber)) return 0;
 	if (vm86_irqs[irqnumber].tsk != current) return 0;
-	spin_lock_irqsave(&irqbits_lock, flags);	
+	spin_lock_irqsave(&irqbits_lock, flags);
 	bit = irqbits & (1 << irqnumber);
 	irqbits &= ~bit;
 	if (bit) {
@@ -799,7 +796,7 @@ static inline int get_and_reset_irq(int irqnumber)
 		ret = 1;
 	}
 
-	spin_unlock_irqrestore(&irqbits_lock, flags);	
+	spin_unlock_irqrestore(&irqbits_lock, flags);
 	return ret;
 }
 
diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S
index 2ffa9656fe7a..ce5ed083a1e9 100644
--- a/arch/x86/kernel/vmlinux_32.lds.S
+++ b/arch/x86/kernel/vmlinux_32.lds.S
@@ -149,6 +149,11 @@ SECTIONS
 	*(.con_initcall.init)
   	__con_initcall_end = .;
   }
+  .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
+	__x86cpuvendor_start = .;
+	*(.x86cpuvendor.init)
+	__x86cpuvendor_end = .;
+  }
   SECURITY_INIT
   . = ALIGN(4);
   .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index fab132299735..b7ab3c335fae 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -177,6 +177,11 @@ SECTIONS
 	*(.con_initcall.init)
   }
   __con_initcall_end = .;
+  __x86cpuvendor_start = .;
+  .x86cpuvendor.init : AT(ADDR(.x86cpuvendor.init) - LOAD_OFFSET) {
+	*(.x86cpuvendor.init)
+  }
+  __x86cpuvendor_end = .;
   SECURITY_INIT
 
   . = ALIGN(8);
@@ -247,3 +252,9 @@ SECTIONS
 
   DWARF_DEBUG
 }
+
+/*
+ * Build-time check on the image size:
+ */
+ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+	"kernel image bigger than KERNEL_IMAGE_SIZE")
diff --git a/arch/x86/kernel/vsmp_64.c b/arch/x86/kernel/vsmp_64.c
index d971210a6d36..caf2a26f5cfd 100644
--- a/arch/x86/kernel/vsmp_64.c
+++ b/arch/x86/kernel/vsmp_64.c
@@ -8,6 +8,8 @@
  *
  * Ravikiran Thirumalai <kiran@scalemp.com>,
  * Shai Fultheim <shai@scalemp.com>
+ * Paravirt ops integration: Glauber de Oliveira Costa <gcosta@redhat.com>,
+ *			     Ravikiran Thirumalai <kiran@scalemp.com>
  */
 
 #include <linux/init.h>
@@ -15,38 +17,137 @@
 #include <linux/pci_regs.h>
 #include <asm/pci-direct.h>
 #include <asm/io.h>
+#include <asm/paravirt.h>
 
-static int __init vsmp_init(void)
+#if defined CONFIG_PCI && defined CONFIG_PARAVIRT
+/*
+ * Interrupt control on vSMPowered systems:
+ * ~AC is a shadow of IF.  If IF is 'on' AC should be 'off'
+ * and vice versa.
+ */
+
+static unsigned long vsmp_save_fl(void)
 {
-	void *address;
-	unsigned int cap, ctl;
+	unsigned long flags = native_save_fl();
 
-	if (!early_pci_allowed())
-		return 0;
+	if (!(flags & X86_EFLAGS_IF) || (flags & X86_EFLAGS_AC))
+		flags &= ~X86_EFLAGS_IF;
+	return flags;
+}
 
-	/* Check if we are running on a ScaleMP vSMP box */
-	if ((read_pci_config_16(0, 0x1f, 0, PCI_VENDOR_ID) !=
-	     PCI_VENDOR_ID_SCALEMP) ||
-	    (read_pci_config_16(0, 0x1f, 0, PCI_DEVICE_ID) !=
-	     PCI_DEVICE_ID_SCALEMP_VSMP_CTL))
-		return 0;
+static void vsmp_restore_fl(unsigned long flags)
+{
+	if (flags & X86_EFLAGS_IF)
+		flags &= ~X86_EFLAGS_AC;
+	else
+		flags |= X86_EFLAGS_AC;
+	native_restore_fl(flags);
+}
+
+static void vsmp_irq_disable(void)
+{
+	unsigned long flags = native_save_fl();
+
+	native_restore_fl((flags & ~X86_EFLAGS_IF) | X86_EFLAGS_AC);
+}
+
+static void vsmp_irq_enable(void)
+{
+	unsigned long flags = native_save_fl();
+
+	native_restore_fl((flags | X86_EFLAGS_IF) & (~X86_EFLAGS_AC));
+}
+
+static unsigned __init vsmp_patch(u8 type, u16 clobbers, void *ibuf,
+				  unsigned long addr, unsigned len)
+{
+	switch (type) {
+	case PARAVIRT_PATCH(pv_irq_ops.irq_enable):
+	case PARAVIRT_PATCH(pv_irq_ops.irq_disable):
+	case PARAVIRT_PATCH(pv_irq_ops.save_fl):
+	case PARAVIRT_PATCH(pv_irq_ops.restore_fl):
+		return paravirt_patch_default(type, clobbers, ibuf, addr, len);
+	default:
+		return native_patch(type, clobbers, ibuf, addr, len);
+	}
+
+}
+
+static void __init set_vsmp_pv_ops(void)
+{
+	void *address;
+	unsigned int cap, ctl, cfg;
 
 	/* set vSMP magic bits to indicate vSMP capable kernel */
-	address = ioremap(read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0), 8);
+	cfg = read_pci_config(0, 0x1f, 0, PCI_BASE_ADDRESS_0);
+	address = early_ioremap(cfg, 8);
 	cap = readl(address);
 	ctl = readl(address + 4);
 	printk(KERN_INFO "vSMP CTL: capabilities:0x%08x  control:0x%08x\n",
 	       cap, ctl);
 	if (cap & ctl & (1 << 4)) {
-		/* Turn on vSMP IRQ fastpath handling (see system.h) */
+		/* Setup irq ops and turn on vSMP  IRQ fastpath handling */
+		pv_irq_ops.irq_disable = vsmp_irq_disable;
+		pv_irq_ops.irq_enable  = vsmp_irq_enable;
+		pv_irq_ops.save_fl  = vsmp_save_fl;
+		pv_irq_ops.restore_fl  = vsmp_restore_fl;
+		pv_init_ops.patch = vsmp_patch;
+
 		ctl &= ~(1 << 4);
 		writel(ctl, address + 4);
 		ctl = readl(address + 4);
 		printk(KERN_INFO "vSMP CTL: control set to:0x%08x\n", ctl);
 	}
 
-	iounmap(address);
+	early_iounmap(address, 8);
+}
+#else
+static void __init set_vsmp_pv_ops(void)
+{
+}
+#endif
+
+#ifdef CONFIG_PCI
+static int is_vsmp = -1;
+
+static void __init detect_vsmp_box(void)
+{
+	is_vsmp = 0;
+
+	if (!early_pci_allowed())
+		return;
+
+	/* Check if we are running on a ScaleMP vSMPowered box */
+	if (read_pci_config(0, 0x1f, 0, PCI_VENDOR_ID) ==
+	     (PCI_VENDOR_ID_SCALEMP | (PCI_DEVICE_ID_SCALEMP_VSMP_CTL << 16)))
+		is_vsmp = 1;
+}
+
+int is_vsmp_box(void)
+{
+	if (is_vsmp != -1)
+		return is_vsmp;
+	else {
+		WARN_ON_ONCE(1);
+		return 0;
+	}
+}
+#else
+static int __init detect_vsmp_box(void)
+{
+}
+int is_vsmp_box(void)
+{
 	return 0;
 }
+#endif
 
-core_initcall(vsmp_init);
+void __init vsmp_init(void)
+{
+	detect_vsmp_box();
+	if (!is_vsmp_box())
+		return;
+
+	set_vsmp_pv_ops();
+	return;
+}
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index a66e9c1a0537..58882f9f2637 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -4,7 +4,6 @@
 #include <linux/module.h>
 #include <linux/smp.h>
 
-#include <asm/semaphore.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -12,11 +11,6 @@
 
 EXPORT_SYMBOL(kernel_thread);
 
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-
 EXPORT_SYMBOL(__get_user_1);
 EXPORT_SYMBOL(__get_user_2);
 EXPORT_SYMBOL(__get_user_4);
@@ -35,15 +29,17 @@ EXPORT_SYMBOL(__copy_from_user_inatomic);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(clear_page);
 
-/* Export string functions. We normally rely on gcc builtin for most of these,
-   but gcc sometimes decides not to inline them. */    
+/*
+ * Export string functions. We normally rely on gcc builtin for most of these,
+ * but gcc sometimes decides not to inline them.
+ */
 #undef memcpy
 #undef memset
 #undef memmove
 
-extern void * memset(void *,int,__kernel_size_t);
-extern void * memcpy(void *,const void *,__kernel_size_t);
-extern void * __memcpy(void *,const void *,__kernel_size_t);
+extern void *memset(void *, int, __kernel_size_t);
+extern void *memcpy(void *, const void *, __kernel_size_t);
+extern void *__memcpy(void *, const void *, __kernel_size_t);
 
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 2cbee9479ce4..68a6b1511934 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -647,6 +647,10 @@ static void start_apic_timer(struct kvm_lapic *apic)
 	apic->timer.period = apic_get_reg(apic, APIC_TMICT) *
 		    APIC_BUS_CYCLE_NS * apic->timer.divide_count;
 	atomic_set(&apic->timer.pending, 0);
+
+	if (!apic->timer.period)
+		return;
+
 	hrtimer_start(&apic->timer.dev,
 		      ktime_add_ns(now, apic->timer.period),
 		      HRTIMER_MODE_ABS);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 8efdcdbebb03..e55af12e11b7 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -222,8 +222,7 @@ static int is_io_pte(unsigned long pte)
 
 static int is_rmap_pte(u64 pte)
 {
-	return pte != shadow_trap_nonpresent_pte
-		&& pte != shadow_notrap_nonpresent_pte;
+	return is_shadow_present_pte(pte);
 }
 
 static gfn_t pse36_gfn_delta(u32 gpte)
@@ -681,8 +680,7 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 					     unsigned level,
 					     int metaphysical,
 					     unsigned access,
-					     u64 *parent_pte,
-					     bool *new_page)
+					     u64 *parent_pte)
 {
 	union kvm_mmu_page_role role;
 	unsigned index;
@@ -722,8 +720,6 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	vcpu->arch.mmu.prefetch_page(vcpu, sp);
 	if (!metaphysical)
 		rmap_write_protect(vcpu->kvm, gfn);
-	if (new_page)
-		*new_page = 1;
 	return sp;
 }
 
@@ -876,11 +872,18 @@ static void page_header_update_slot(struct kvm *kvm, void *pte, gfn_t gfn)
 
 struct page *gva_to_page(struct kvm_vcpu *vcpu, gva_t gva)
 {
+	struct page *page;
+
 	gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
 
 	if (gpa == UNMAPPED_GVA)
 		return NULL;
-	return gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+
+	down_read(&current->mm->mmap_sem);
+	page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+	up_read(&current->mm->mmap_sem);
+
+	return page;
 }
 
 static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
@@ -889,14 +892,25 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 			 int *ptwrite, gfn_t gfn, struct page *page)
 {
 	u64 spte;
-	int was_rmapped = is_rmap_pte(*shadow_pte);
+	int was_rmapped = 0;
 	int was_writeble = is_writeble_pte(*shadow_pte);
+	hfn_t host_pfn = (*shadow_pte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
 
 	pgprintk("%s: spte %llx access %x write_fault %d"
 		 " user_fault %d gfn %lx\n",
 		 __FUNCTION__, *shadow_pte, pt_access,
 		 write_fault, user_fault, gfn);
 
+	if (is_rmap_pte(*shadow_pte)) {
+		if (host_pfn != page_to_pfn(page)) {
+			pgprintk("hfn old %lx new %lx\n",
+				 host_pfn, page_to_pfn(page));
+			rmap_remove(vcpu->kvm, shadow_pte);
+		}
+		else
+			was_rmapped = 1;
+	}
+
 	/*
 	 * We don't set the accessed bit, since we sometimes want to see
 	 * whether the guest actually used the pte (in order to detect
@@ -999,8 +1013,7 @@ static int __nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write,
 				>> PAGE_SHIFT;
 			new_table = kvm_mmu_get_page(vcpu, pseudo_gfn,
 						     v, level - 1,
-						     1, ACC_ALL, &table[index],
-						     NULL);
+						     1, ACC_ALL, &table[index]);
 			if (!new_table) {
 				pgprintk("nonpaging_map: ENOMEM\n");
 				kvm_release_page_clean(page);
@@ -1020,15 +1033,18 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 
 	struct page *page;
 
+	down_read(&vcpu->kvm->slots_lock);
+
 	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(vcpu->kvm, gfn);
+	up_read(&current->mm->mmap_sem);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 	kvm_mmu_free_some_pages(vcpu);
 	r = __nonpaging_map(vcpu, v, write, gfn, page);
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	return r;
 }
@@ -1090,7 +1106,7 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 
 		ASSERT(!VALID_PAGE(root));
 		sp = kvm_mmu_get_page(vcpu, root_gfn, 0,
-				      PT64_ROOT_LEVEL, 0, ACC_ALL, NULL, NULL);
+				      PT64_ROOT_LEVEL, 0, ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
 		vcpu->arch.mmu.root_hpa = root;
@@ -1111,7 +1127,7 @@ static void mmu_alloc_roots(struct kvm_vcpu *vcpu)
 			root_gfn = 0;
 		sp = kvm_mmu_get_page(vcpu, root_gfn, i << 30,
 				      PT32_ROOT_LEVEL, !is_paging(vcpu),
-				      ACC_ALL, NULL, NULL);
+				      ACC_ALL, NULL);
 		root = __pa(sp->spt);
 		++sp->root_count;
 		vcpu->arch.mmu.pae_root[i] = root | PT_PRESENT_MASK;
@@ -1172,7 +1188,7 @@ void kvm_mmu_flush_tlb(struct kvm_vcpu *vcpu)
 
 static void paging_new_cr3(struct kvm_vcpu *vcpu)
 {
-	pgprintk("%s: cr3 %lx\n", __FUNCTION__, vcpu->cr3);
+	pgprintk("%s: cr3 %lx\n", __FUNCTION__, vcpu->arch.cr3);
 	mmu_free_roots(vcpu);
 }
 
@@ -1362,6 +1378,7 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	gfn_t gfn;
 	int r;
 	u64 gpte = 0;
+	struct page *page;
 
 	if (bytes != 4 && bytes != 8)
 		return;
@@ -1389,8 +1406,13 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	if (!is_present_pte(gpte))
 		return;
 	gfn = (gpte & PT64_BASE_ADDR_MASK) >> PAGE_SHIFT;
+
+	down_read(&current->mm->mmap_sem);
+	page = gfn_to_page(vcpu->kvm, gfn);
+	up_read(&current->mm->mmap_sem);
+
 	vcpu->arch.update_pte.gfn = gfn;
-	vcpu->arch.update_pte.page = gfn_to_page(vcpu->kvm, gfn);
+	vcpu->arch.update_pte.page = page;
 }
 
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
@@ -1496,9 +1518,9 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	gpa_t gpa;
 	int r;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, gva);
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 	r = kvm_mmu_unprotect_page(vcpu->kvm, gpa >> PAGE_SHIFT);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 03ba8608fe0f..ecc0856268c4 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -91,7 +91,10 @@ static bool FNAME(cmpxchg_gpte)(struct kvm *kvm,
 	pt_element_t *table;
 	struct page *page;
 
+	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(kvm, table_gfn);
+	up_read(&current->mm->mmap_sem);
+
 	table = kmap_atomic(page, KM_USER0);
 
 	ret = CMPXCHG(&table[index], orig_pte, new_pte);
@@ -140,7 +143,7 @@ walk:
 	}
 #endif
 	ASSERT((!is_long_mode(vcpu) && is_pae(vcpu)) ||
-	       (vcpu->cr3 & CR3_NONPAE_RESERVED_BITS) == 0);
+	       (vcpu->arch.cr3 & CR3_NONPAE_RESERVED_BITS) == 0);
 
 	pt_access = ACC_ALL;
 
@@ -297,7 +300,6 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		u64 shadow_pte;
 		int metaphysical;
 		gfn_t table_gfn;
-		bool new_page = 0;
 
 		shadow_ent = ((u64 *)__va(shadow_addr)) + index;
 		if (level == PT_PAGE_TABLE_LEVEL)
@@ -319,8 +321,8 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		}
 		shadow_page = kvm_mmu_get_page(vcpu, table_gfn, addr, level-1,
 					       metaphysical, access,
-					       shadow_ent, &new_page);
-		if (new_page && !metaphysical) {
+					       shadow_ent);
+		if (!metaphysical) {
 			int r;
 			pt_element_t curr_pte;
 			r = kvm_read_guest_atomic(vcpu->kvm,
@@ -378,7 +380,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	if (r)
 		return r;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	/*
 	 * Look up the shadow pte for the faulting address.
 	 */
@@ -392,11 +394,13 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 		pgprintk("%s: guest page fault\n", __FUNCTION__);
 		inject_page_fault(vcpu, addr, walker.error_code);
 		vcpu->arch.last_pt_write_count = 0; /* reset fork detector */
-		up_read(&current->mm->mmap_sem);
+		up_read(&vcpu->kvm->slots_lock);
 		return 0;
 	}
 
+	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(vcpu->kvm, walker.gfn);
+	up_read(&current->mm->mmap_sem);
 
 	spin_lock(&vcpu->kvm->mmu_lock);
 	kvm_mmu_free_some_pages(vcpu);
@@ -413,14 +417,14 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	 */
 	if (shadow_pte && is_io_pte(*shadow_pte)) {
 		spin_unlock(&vcpu->kvm->mmu_lock);
-		up_read(&current->mm->mmap_sem);
+		up_read(&vcpu->kvm->slots_lock);
 		return 1;
 	}
 
 	++vcpu->stat.pf_fixed;
 	kvm_mmu_audit(vcpu, "post page fault (fixed)");
 	spin_unlock(&vcpu->kvm->mmu_lock);
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	return write_pt;
 }
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index de755cb1431d..1a582f1090e8 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -792,6 +792,10 @@ static void svm_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 	vcpu->arch.cr0 = cr0;
 	cr0 |= X86_CR0_PG | X86_CR0_WP;
 	cr0 &= ~(X86_CR0_CD | X86_CR0_NW);
+	if (!vcpu->fpu_active) {
+		svm->vmcb->control.intercept_exceptions |= (1 << NM_VECTOR);
+		cr0 |= X86_CR0_TS;
+	}
 	svm->vmcb->save.cr0 = cr0;
 }
 
@@ -1096,6 +1100,24 @@ static int svm_get_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 *data)
 	case MSR_IA32_SYSENTER_ESP:
 		*data = svm->vmcb->save.sysenter_esp;
 		break;
+	/* Nobody will change the following 5 values in the VMCB so
+	   we can safely return them on rdmsr. They will always be 0
+	   until LBRV is implemented. */
+	case MSR_IA32_DEBUGCTLMSR:
+		*data = svm->vmcb->save.dbgctl;
+		break;
+	case MSR_IA32_LASTBRANCHFROMIP:
+		*data = svm->vmcb->save.br_from;
+		break;
+	case MSR_IA32_LASTBRANCHTOIP:
+		*data = svm->vmcb->save.br_to;
+		break;
+	case MSR_IA32_LASTINTFROMIP:
+		*data = svm->vmcb->save.last_excp_from;
+		break;
+	case MSR_IA32_LASTINTTOIP:
+		*data = svm->vmcb->save.last_excp_to;
+		break;
 	default:
 		return kvm_get_msr_common(vcpu, ecx, data);
 	}
@@ -1156,6 +1178,10 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	case MSR_IA32_SYSENTER_ESP:
 		svm->vmcb->save.sysenter_esp = data;
 		break;
+	case MSR_IA32_DEBUGCTLMSR:
+		pr_unimpl(vcpu, "%s: MSR_IA32_DEBUGCTLMSR 0x%llx, nop\n",
+				__FUNCTION__, data);
+		break;
 	case MSR_K7_EVNTSEL0:
 	case MSR_K7_EVNTSEL1:
 	case MSR_K7_EVNTSEL2:
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index ad36447e696e..8e1462880d1f 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -349,8 +349,6 @@ static void update_exception_bitmap(struct kvm_vcpu *vcpu)
 
 static void reload_tss(void)
 {
-#ifndef CONFIG_X86_64
-
 	/*
 	 * VT restores TR but not its size.  Useless.
 	 */
@@ -361,7 +359,6 @@ static void reload_tss(void)
 	descs = (void *)gdt.base;
 	descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
 	load_TR_desc();
-#endif
 }
 
 static void load_transition_efer(struct vcpu_vmx *vmx)
@@ -638,6 +635,7 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 {
 	int save_nmsrs;
 
+	vmx_load_host_state(vmx);
 	save_nmsrs = 0;
 #ifdef CONFIG_X86_64
 	if (is_long_mode(&vmx->vcpu)) {
@@ -1435,7 +1433,7 @@ static int init_rmode_tss(struct kvm *kvm)
 	int ret = 0;
 	int r;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&kvm->slots_lock);
 	r = kvm_clear_guest_page(kvm, fn, 0, PAGE_SIZE);
 	if (r < 0)
 		goto out;
@@ -1458,7 +1456,7 @@ static int init_rmode_tss(struct kvm *kvm)
 
 	ret = 1;
 out:
-	up_read(&current->mm->mmap_sem);
+	up_read(&kvm->slots_lock);
 	return ret;
 }
 
@@ -1477,7 +1475,7 @@ static int alloc_apic_access_page(struct kvm *kvm)
 	struct kvm_userspace_memory_region kvm_userspace_mem;
 	int r = 0;
 
-	down_write(&current->mm->mmap_sem);
+	down_write(&kvm->slots_lock);
 	if (kvm->arch.apic_access_page)
 		goto out;
 	kvm_userspace_mem.slot = APIC_ACCESS_PAGE_PRIVATE_MEMSLOT;
@@ -1487,9 +1485,12 @@ static int alloc_apic_access_page(struct kvm *kvm)
 	r = __kvm_set_memory_region(kvm, &kvm_userspace_mem, 0);
 	if (r)
 		goto out;
+
+	down_read(&current->mm->mmap_sem);
 	kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00);
+	up_read(&current->mm->mmap_sem);
 out:
-	up_write(&current->mm->mmap_sem);
+	up_write(&kvm->slots_lock);
 	return r;
 }
 
@@ -1602,9 +1603,6 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_writel(CR0_GUEST_HOST_MASK, ~0UL);
 	vmcs_writel(CR4_GUEST_HOST_MASK, KVM_GUEST_CR4_MASK);
 
-	if (vm_need_virtualize_apic_accesses(vmx->vcpu.kvm))
-		if (alloc_apic_access_page(vmx->vcpu.kvm) != 0)
-			return -ENOMEM;
 
 	return 0;
 }
@@ -2534,6 +2532,9 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 	put_cpu();
 	if (err)
 		goto free_vmcs;
+	if (vm_need_virtualize_apic_accesses(kvm))
+		if (alloc_apic_access_page(kvm) != 0)
+			goto free_vmcs;
 
 	return &vmx->vcpu;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index cf5308148689..6b01552bd1f1 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -46,6 +46,9 @@
 #define VM_STAT(x) offsetof(struct kvm, stat.x), KVM_STAT_VM
 #define VCPU_STAT(x) offsetof(struct kvm_vcpu, stat.x), KVM_STAT_VCPU
 
+static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
+				    struct kvm_cpuid_entry2 __user *entries);
+
 struct kvm_x86_ops *kvm_x86_ops;
 
 struct kvm_stats_debugfs_item debugfs_entries[] = {
@@ -181,7 +184,7 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 	int ret;
 	u64 pdpte[ARRAY_SIZE(vcpu->arch.pdptrs)];
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	ret = kvm_read_guest_page(vcpu->kvm, pdpt_gfn, pdpte,
 				  offset * sizeof(u64), sizeof(pdpte));
 	if (ret < 0) {
@@ -198,7 +201,7 @@ int load_pdptrs(struct kvm_vcpu *vcpu, unsigned long cr3)
 
 	memcpy(vcpu->arch.pdptrs, pdpte, sizeof(vcpu->arch.pdptrs));
 out:
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	return ret;
 }
@@ -212,13 +215,13 @@ static bool pdptrs_changed(struct kvm_vcpu *vcpu)
 	if (is_long_mode(vcpu) || !is_pae(vcpu))
 		return false;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	r = kvm_read_guest(vcpu->kvm, vcpu->arch.cr3 & ~31u, pdpte, sizeof(pdpte));
 	if (r < 0)
 		goto out;
 	changed = memcmp(pdpte, vcpu->arch.pdptrs, sizeof(pdpte)) != 0;
 out:
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	return changed;
 }
@@ -356,7 +359,7 @@ void set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		 */
 	}
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	/*
 	 * Does the new cr3 value map to physical memory? (Note, we
 	 * catch an invalid cr3 even in real-mode, because it would
@@ -372,7 +375,7 @@ void set_cr3(struct kvm_vcpu *vcpu, unsigned long cr3)
 		vcpu->arch.cr3 = cr3;
 		vcpu->arch.mmu.new_cr3(vcpu);
 	}
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 }
 EXPORT_SYMBOL_GPL(set_cr3);
 
@@ -484,6 +487,10 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_STATUS 0x%llx, nop\n",
 			__FUNCTION__, data);
 		break;
+	case MSR_IA32_MCG_CTL:
+		pr_unimpl(vcpu, "%s: MSR_IA32_MCG_CTL 0x%llx, nop\n",
+			__FUNCTION__, data);
+		break;
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
 	case 0x200 ... 0x2ff: /* MTRRs */
@@ -526,6 +533,7 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_CTL:
 	case MSR_IA32_MCG_STATUS:
 	case MSR_IA32_MCG_CAP:
+	case MSR_IA32_MCG_CTL:
 	case MSR_IA32_MC0_MISC:
 	case MSR_IA32_MC0_MISC+4:
 	case MSR_IA32_MC0_MISC+8:
@@ -727,6 +735,24 @@ long kvm_arch_dev_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
+	case KVM_GET_SUPPORTED_CPUID: {
+		struct kvm_cpuid2 __user *cpuid_arg = argp;
+		struct kvm_cpuid2 cpuid;
+
+		r = -EFAULT;
+		if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
+			goto out;
+		r = kvm_dev_ioctl_get_supported_cpuid(&cpuid,
+			cpuid_arg->entries);
+		if (r)
+			goto out;
+
+		r = -EFAULT;
+		if (copy_to_user(cpuid_arg, &cpuid, sizeof cpuid))
+			goto out;
+		r = 0;
+		break;
+	}
 	default:
 		r = -EINVAL;
 	}
@@ -974,8 +1000,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	put_cpu();
 }
 
-static int kvm_vm_ioctl_get_supported_cpuid(struct kvm *kvm,
-				    struct kvm_cpuid2 *cpuid,
+static int kvm_dev_ioctl_get_supported_cpuid(struct kvm_cpuid2 *cpuid,
 				    struct kvm_cpuid_entry2 __user *entries)
 {
 	struct kvm_cpuid_entry2 *cpuid_entries;
@@ -1207,12 +1232,12 @@ static int kvm_vm_ioctl_set_nr_mmu_pages(struct kvm *kvm,
 	if (kvm_nr_mmu_pages < KVM_MIN_ALLOC_MMU_PAGES)
 		return -EINVAL;
 
-	down_write(&current->mm->mmap_sem);
+	down_write(&kvm->slots_lock);
 
 	kvm_mmu_change_mmu_pages(kvm, kvm_nr_mmu_pages);
 	kvm->arch.n_requested_mmu_pages = kvm_nr_mmu_pages;
 
-	up_write(&current->mm->mmap_sem);
+	up_write(&kvm->slots_lock);
 	return 0;
 }
 
@@ -1261,7 +1286,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 	    < alias->target_phys_addr)
 		goto out;
 
-	down_write(&current->mm->mmap_sem);
+	down_write(&kvm->slots_lock);
 
 	p = &kvm->arch.aliases[alias->slot];
 	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
@@ -1275,7 +1300,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 
 	kvm_mmu_zap_all(kvm);
 
-	up_write(&current->mm->mmap_sem);
+	up_write(&kvm->slots_lock);
 
 	return 0;
 
@@ -1351,7 +1376,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	struct kvm_memory_slot *memslot;
 	int is_dirty = 0;
 
-	down_write(&current->mm->mmap_sem);
+	down_write(&kvm->slots_lock);
 
 	r = kvm_get_dirty_log(kvm, log, &is_dirty);
 	if (r)
@@ -1367,7 +1392,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
 	}
 	r = 0;
 out:
-	up_write(&current->mm->mmap_sem);
+	up_write(&kvm->slots_lock);
 	return r;
 }
 
@@ -1487,24 +1512,6 @@ long kvm_arch_vm_ioctl(struct file *filp,
 		r = 0;
 		break;
 	}
-	case KVM_GET_SUPPORTED_CPUID: {
-		struct kvm_cpuid2 __user *cpuid_arg = argp;
-		struct kvm_cpuid2 cpuid;
-
-		r = -EFAULT;
-		if (copy_from_user(&cpuid, cpuid_arg, sizeof cpuid))
-			goto out;
-		r = kvm_vm_ioctl_get_supported_cpuid(kvm, &cpuid,
-			cpuid_arg->entries);
-		if (r)
-			goto out;
-
-		r = -EFAULT;
-		if (copy_to_user(cpuid_arg, &cpuid, sizeof cpuid))
-			goto out;
-		r = 0;
-		break;
-	}
 	default:
 		;
 	}
@@ -1563,7 +1570,7 @@ int emulator_read_std(unsigned long addr,
 	void *data = val;
 	int r = X86EMUL_CONTINUE;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	while (bytes) {
 		gpa_t gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
 		unsigned offset = addr & (PAGE_SIZE-1);
@@ -1585,7 +1592,7 @@ int emulator_read_std(unsigned long addr,
 		addr += tocopy;
 	}
 out:
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 	return r;
 }
 EXPORT_SYMBOL_GPL(emulator_read_std);
@@ -1604,9 +1611,9 @@ static int emulator_read_emulated(unsigned long addr,
 		return X86EMUL_CONTINUE;
 	}
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	/* For APIC access vmexit */
 	if ((gpa & PAGE_MASK) == APIC_DEFAULT_PHYS_BASE)
@@ -1644,14 +1651,14 @@ static int emulator_write_phys(struct kvm_vcpu *vcpu, gpa_t gpa,
 {
 	int ret;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	ret = kvm_write_guest(vcpu->kvm, gpa, val, bytes);
 	if (ret < 0) {
-		up_read(&current->mm->mmap_sem);
+		up_read(&vcpu->kvm->slots_lock);
 		return 0;
 	}
 	kvm_mmu_pte_write(vcpu, gpa, val, bytes);
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 	return 1;
 }
 
@@ -1663,9 +1670,9 @@ static int emulator_write_emulated_onepage(unsigned long addr,
 	struct kvm_io_device *mmio_dev;
 	gpa_t                 gpa;
 
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 
 	if (gpa == UNMAPPED_GVA) {
 		kvm_inject_page_fault(vcpu, addr, 2);
@@ -1742,7 +1749,7 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 		char *kaddr;
 		u64 val;
 
-		down_read(&current->mm->mmap_sem);
+		down_read(&vcpu->kvm->slots_lock);
 		gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, addr);
 
 		if (gpa == UNMAPPED_GVA ||
@@ -1753,13 +1760,17 @@ static int emulator_cmpxchg_emulated(unsigned long addr,
 			goto emul_write;
 
 		val = *(u64 *)new;
+
+		down_read(&current->mm->mmap_sem);
 		page = gfn_to_page(vcpu->kvm, gpa >> PAGE_SHIFT);
+		up_read(&current->mm->mmap_sem);
+
 		kaddr = kmap_atomic(page, KM_USER0);
 		set_64bit((u64 *)(kaddr + offset_in_page(gpa)), val);
 		kunmap_atomic(kaddr, KM_USER0);
 		kvm_release_page_dirty(page);
 	emul_write:
-		up_read(&current->mm->mmap_sem);
+		up_read(&vcpu->kvm->slots_lock);
 	}
 #endif
 
@@ -2152,10 +2163,10 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		kvm_x86_ops->skip_emulated_instruction(vcpu);
 
 	for (i = 0; i < nr_pages; ++i) {
-		down_read(&current->mm->mmap_sem);
+		down_read(&vcpu->kvm->slots_lock);
 		page = gva_to_page(vcpu, address + i * PAGE_SIZE);
 		vcpu->arch.pio.guest_pages[i] = page;
-		up_read(&current->mm->mmap_sem);
+		up_read(&vcpu->kvm->slots_lock);
 		if (!page) {
 			kvm_inject_gp(vcpu, 0);
 			free_pio_guest_pages(vcpu);
@@ -2478,8 +2489,9 @@ static void vapic_enter(struct kvm_vcpu *vcpu)
 
 	down_read(&current->mm->mmap_sem);
 	page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
-	vcpu->arch.apic->vapic_page = page;
 	up_read(&current->mm->mmap_sem);
+
+	vcpu->arch.apic->vapic_page = page;
 }
 
 static void vapic_exit(struct kvm_vcpu *vcpu)
@@ -2861,8 +2873,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
 
 	mmu_reset_needed |= vcpu->arch.cr0 != sregs->cr0;
-	vcpu->arch.cr0 = sregs->cr0;
 	kvm_x86_ops->set_cr0(vcpu, sregs->cr0);
+	vcpu->arch.cr0 = sregs->cr0;
 
 	mmu_reset_needed |= vcpu->arch.cr4 != sregs->cr4;
 	kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
@@ -2952,9 +2964,9 @@ int kvm_arch_vcpu_ioctl_translate(struct kvm_vcpu *vcpu,
 	gpa_t gpa;
 
 	vcpu_load(vcpu);
-	down_read(&current->mm->mmap_sem);
+	down_read(&vcpu->kvm->slots_lock);
 	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, vaddr);
-	up_read(&current->mm->mmap_sem);
+	up_read(&vcpu->kvm->slots_lock);
 	tr->physical_address = gpa;
 	tr->valid = gpa != UNMAPPED_GVA;
 	tr->writeable = 1;
@@ -3227,11 +3239,13 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	 */
 	if (!user_alloc) {
 		if (npages && !old.rmap) {
+			down_write(&current->mm->mmap_sem);
 			memslot->userspace_addr = do_mmap(NULL, 0,
 						     npages * PAGE_SIZE,
 						     PROT_READ | PROT_WRITE,
 						     MAP_SHARED | MAP_ANONYMOUS,
 						     0);
+			up_write(&current->mm->mmap_sem);
 
 			if (IS_ERR((void *)memslot->userspace_addr))
 				return PTR_ERR((void *)memslot->userspace_addr);
@@ -3239,8 +3253,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 			if (!old.user_alloc && old.rmap) {
 				int ret;
 
+				down_write(&current->mm->mmap_sem);
 				ret = do_munmap(current->mm, old.userspace_addr,
 						old.npages * PAGE_SIZE);
+				up_write(&current->mm->mmap_sem);
 				if (ret < 0)
 					printk(KERN_WARNING
 				       "kvm_vm_ioctl_set_memory_region: "
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index cccb38a59653..af65b2da3ba0 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -10,21 +10,19 @@
  * (such as the example in Documentation/lguest/lguest.c) is called the
  * Launcher.
  *
- * Secondly, we only run specially modified Guests, not normal kernels.  When
- * you set CONFIG_LGUEST to 'y' or 'm', this automatically sets
- * CONFIG_LGUEST_GUEST=y, which compiles this file into the kernel so it knows
- * how to be a Guest.  This means that you can use the same kernel you boot
- * normally (ie. as a Host) as a Guest.
+ * Secondly, we only run specially modified Guests, not normal kernels: setting
+ * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
+ * how to be a Guest at boot time.  This means that you can use the same kernel
+ * you boot normally (ie. as a Host) as a Guest.
  *
  * These Guests know that they cannot do privileged operations, such as disable
  * interrupts, and that they have to ask the Host to do such things explicitly.
  * This file consists of all the replacements for such low-level native
  * hardware operations: these special Guest versions call the Host.
  *
- * So how does the kernel know it's a Guest?  The Guest starts at a special
- * entry point marked with a magic string, which sets up a few things then
- * calls here.  We replace the native functions various "paravirt" structures
- * with our Guest versions, then boot like normal. :*/
+ * So how does the kernel know it's a Guest?  We'll see that later, but let's
+ * just say that we end up here where we replace the native functions various
+ * "paravirt" structures with our Guest versions, then boot like normal. :*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -84,7 +82,6 @@ struct lguest_data lguest_data = {
 	.blocked_interrupts = { 1 }, /* Block timer interrupts */
 	.syscall_vec = SYSCALL_VECTOR,
 };
-static cycle_t clock_base;
 
 /*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
@@ -135,7 +132,7 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing. */
+ * future processing: */
 static void lazy_hcall(unsigned long call,
 		       unsigned long arg1,
 		       unsigned long arg2,
@@ -148,7 +145,7 @@ static void lazy_hcall(unsigned long call,
 }
 
 /* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue a hypercall to flush any stored calls. */
+ * issue the do-nothing hypercall to flush any stored calls. */
 static void lguest_leave_lazy_mode(void)
 {
 	paravirt_leave_lazy(paravirt_get_lazy_mode());
@@ -165,7 +162,7 @@ static void lguest_leave_lazy_mode(void)
  *
  * So instead we keep an "irq_enabled" field inside our "struct lguest_data",
  * which the Guest can update with a single instruction.  The Host knows to
- * check there when it wants to deliver an interrupt.
+ * check there before it tries to deliver an interrupt.
  */
 
 /* save_flags() is expected to return the processor state (ie. "flags").  The
@@ -197,10 +194,15 @@ static void irq_enable(void)
 /*M:003 Note that we don't check for outstanding interrupts when we re-enable
  * them (or when we unmask an interrupt).  This seems to work for the moment,
  * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but when we turn on CONFIG_NO_HZ, we should revisit this.  One way
+ * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
  * would be to put the "irq_enabled" field in a page by itself, and have the
  * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled. :*/
+ * There will then be a page fault as soon as interrupts are re-enabled.
+ *
+ * A better method is to implement soft interrupt disable generally for x86:
+ * instead of disabling interrupts, we set a flag.  If an interrupt does come
+ * in, we then disable them for real.  This is uncommon, so we could simply use
+ * a hypercall for interrupt control and not worry about efficiency. :*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -213,6 +215,10 @@ static void irq_enable(void)
 static void lguest_write_idt_entry(gate_desc *dt,
 				   int entrynum, const gate_desc *g)
 {
+	/* The gate_desc structure is 8 bytes long: we hand it to the Host in
+	 * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
+	 * around like this; typesafety wasn't a big concern in Linux's early
+	 * years. */
 	u32 *desc = (u32 *)g;
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
@@ -244,7 +250,8 @@ static void lguest_load_idt(const struct desc_ptr *desc)
  *
  * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
  * hypercall and use that repeatedly to load a new IDT.  I don't think it
- * really matters, but wouldn't it be nice if they were the same?
+ * really matters, but wouldn't it be nice if they were the same?  Wouldn't
+ * it be even better if you were the one to send the patch to fix it?
  */
 static void lguest_load_gdt(const struct desc_ptr *desc)
 {
@@ -299,9 +306,9 @@ static void lguest_load_tr_desc(void)
 
 /* The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
- * Pentium in 1993 and keeps getting extended by both Intel and AMD.  As you
- * might imagine, after a decade and a half this treatment, it is now a giant
- * ball of hair.  Its entry in the current Intel manual runs to 28 pages.
+ * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
+ * As you might imagine, after a decade and a half this treatment, it is now a
+ * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
  * has been translated into 4 languages.  I am not making this up!
@@ -327,8 +334,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 	case 1:	/* Basic feature request. */
 		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, FPU. */
-		*dx &= 0x07808101;
+		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU. */
+		*dx &= 0x07808111;
 		/* The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
@@ -481,7 +488,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
 	*pmdp = pmdval;
 	lazy_hcall(LHCALL_SET_PMD, __pa(pmdp)&PAGE_MASK,
-		   (__pa(pmdp)&(PAGE_SIZE-1)), 0);
+		   (__pa(pmdp)&(PAGE_SIZE-1))/4, 0);
 }
 
 /* There are a couple of legacy places where the kernel sets a PTE, but we
@@ -595,19 +602,25 @@ static unsigned long lguest_get_wallclock(void)
 	return lguest_data.time.tv_sec;
 }
 
+/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+ * what speed it runs at, or 0 if it's unusable as a reliable clock source.
+ * This matches what we want here: if we return 0 from this function, the x86
+ * TSC clock will give up and not register itself. */
+static unsigned long lguest_cpu_khz(void)
+{
+	return lguest_data.tsc_khz;
+}
+
+/* If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host. */
 static cycle_t lguest_clock_read(void)
 {
 	unsigned long sec, nsec;
 
-	/* If the Host tells the TSC speed, we can trust that. */
-	if (lguest_data.tsc_khz)
-		return native_read_tsc();
-
-	/* If we can't use the TSC, we read the time value written by the Host.
-	 * Since it's in two parts (seconds and nanoseconds), we risk reading
-	 * it just as it's changing from 99 & 0.999999999 to 100 and 0, and
-	 * getting 99 and 0.  As Linux tends to come apart under the stress of
-	 * time travel, we must be careful: */
+	/* Since the time is in two parts (seconds and nanoseconds), we risk
+	 * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
+	 * and getting 99 and 0.  As Linux tends to come apart under the stress
+	 * of time travel, we must be careful: */
 	do {
 		/* First we read the seconds part. */
 		sec = lguest_data.time.tv_sec;
@@ -622,14 +635,14 @@ static cycle_t lguest_clock_read(void)
 		/* Now if the seconds part has changed, try again. */
 	} while (unlikely(lguest_data.time.tv_sec != sec));
 
-	/* Our non-TSC clock is in real nanoseconds. */
+	/* Our lguest clock is in real nanoseconds. */
 	return sec*1000000000ULL + nsec;
 }
 
-/* This is what we tell the kernel is our clocksource.  */
+/* This is the fallback clocksource: lower priority than the TSC clocksource. */
 static struct clocksource lguest_clock = {
 	.name		= "lguest",
-	.rating		= 400,
+	.rating		= 200,
 	.read		= lguest_clock_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.mult		= 1 << 22,
@@ -637,24 +650,22 @@ static struct clocksource lguest_clock = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/* The "scheduler clock" is just our real clock, adjusted to start at zero */
-static unsigned long long lguest_sched_clock(void)
-{
-	return cyc2ns(&lguest_clock, lguest_clock_read() - clock_base);
-}
-
 /* We also need a "struct clock_event_device": Linux asks us to set it to go
  * off some time in the future.  Actually, James Morris figured all this out, I
  * just applied the patch. */
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
+	/* FIXME: I don't think this can ever happen, but James tells me he had
+	 * to put this code in.  Maybe we should remove it now.  Anyone? */
 	if (delta < LG_CLOCK_MIN_DELTA) {
 		if (printk_ratelimit())
 			printk(KERN_DEBUG "%s: small delta %lu ns\n",
-			       __FUNCTION__, delta);
+			       __func__, delta);
 		return -ETIME;
 	}
+
+	/* Please wake us this far in the future. */
 	hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0);
 	return 0;
 }
@@ -712,19 +723,8 @@ static void lguest_time_init(void)
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
 	set_irq_handler(0, lguest_time_irq);
 
-	/* Our clock structure looks like arch/x86/kernel/tsc_32.c if we can
-	 * use the TSC, otherwise it's a dumb nanosecond-resolution clock.
-	 * Either way, the "rating" is set so high that it's always chosen over
-	 * any other clocksource. */
-	if (lguest_data.tsc_khz)
-		lguest_clock.mult = clocksource_khz2mult(lguest_data.tsc_khz,
-							 lguest_clock.shift);
-	clock_base = lguest_clock_read();
 	clocksource_register(&lguest_clock);
 
-	/* Now we've set up our clock, we can use it as the scheduler clock */
-	pv_time_ops.sched_clock = lguest_sched_clock;
-
 	/* We can't set cpumask in the initializer: damn C limitations!  Set it
 	 * here and register our timer device. */
 	lguest_clockevent.cpumask = cpumask_of_cpu(0);
@@ -750,7 +750,7 @@ static void lguest_time_init(void)
  * will not tolerate us trying to use that), the stack pointer, and the number
  * of pages in the stack. */
 static void lguest_load_sp0(struct tss_struct *tss,
-				     struct thread_struct *thread)
+			    struct thread_struct *thread)
 {
 	lazy_hcall(LHCALL_SET_STACK, __KERNEL_DS|0x1, thread->sp0,
 		   THREAD_SIZE/PAGE_SIZE);
@@ -798,9 +798,8 @@ static void lguest_safe_halt(void)
 	hcall(LHCALL_HALT, 0, 0, 0);
 }
 
-/* Perhaps CRASH isn't the best name for this hypercall, but we use it to get a
- * message out when we're crashing as well as elegant termination like powering
- * off.
+/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+ * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
  * rather than virtual addresses, so we use __pa() here. */
@@ -828,8 +827,9 @@ static struct notifier_block paniced = {
 /* Setting up memory is fairly easy. */
 static __init char *lguest_memory_setup(void)
 {
-	/* We do this here and not earlier because lockcheck barfs if we do it
-	 * before start_kernel() */
+	/* We do this here and not earlier because lockcheck used to barf if we
+	 * did it before start_kernel().  I think we fixed that, so it'd be
+	 * nice to move it back to lguest_init.  Patch welcome... */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
 	/* The Linux bootloader header contains an "e820" memory map: the
@@ -862,12 +862,19 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
+/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us. */
+static void lguest_restart(char *reason)
+{
+	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
+}
+
 /*G:050
  * Patching (Powerfully Placating Performance Pedants)
  *
- * We have already seen that pv_ops structures let us replace simple
- * native instructions with calls to the appropriate back end all throughout
- * the kernel.  This allows the same kernel to run as a Guest and as a native
+ * We have already seen that pv_ops structures let us replace simple native
+ * instructions with calls to the appropriate back end all throughout the
+ * kernel.  This allows the same kernel to run as a Guest and as a native
  * kernel, but it's slow because of all the indirect branches.
  *
  * Remember that David Wheeler quote about "Any problem in computer science can
@@ -920,14 +927,9 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-static void lguest_restart(char *reason)
-{
-	hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0);
-}
-
-/*G:030 Once we get to lguest_init(), we know we're a Guest.  The pv_ops
- * structures in the kernel provide points for (almost) every routine we have
- * to override to avoid privileged instructions. */
+/*G:030 Once we get to lguest_init(), we know we're a Guest.  The various
+ * pv_ops structures in the kernel provide points for (almost) every routine we
+ * have to override to avoid privileged instructions. */
 __init void lguest_init(void)
 {
 	/* We're under lguest, paravirt is enabled, and we're running at
@@ -995,6 +997,7 @@ __init void lguest_init(void)
 	/* time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
 	pv_time_ops.time_init = lguest_time_init;
+	pv_time_ops.get_cpu_khz = lguest_cpu_khz;
 
 	/* Now is a good time to look at the implementations of these functions
 	 * before returning to the rest of lguest_init(). */
@@ -1014,9 +1017,9 @@ __init void lguest_init(void)
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
 
-	/* The Host uses the top of the Guest's virtual address space for the
-	 * Host<->Guest Switcher, and it tells us how big that is in
-	 * lguest_data.reserve_mem, set up on the LGUEST_INIT hypercall. */
+	/* The Host<->Guest Switcher lives at the top of our address space, and
+	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
+	 * it put the answer in lguest_data.reserve_mem  */
 	reserve_top_address(lguest_data.reserve_mem);
 
 	/* If we don't initialize the lock dependency checker now, it crashes
@@ -1038,6 +1041,7 @@ __init void lguest_init(void)
 	/* Math is always hard! */
 	new_cpu_data.hard_math = 1;
 
+	/* We don't have features.  We have puppies!  Puppies! */
 #ifdef CONFIG_X86_MCE
 	mce_disabled = 1;
 #endif
@@ -1055,10 +1059,11 @@ __init void lguest_init(void)
 	virtio_cons_early_init(early_put_chars);
 
 	/* Last of all, we set the power management poweroff hook to point to
-	 * the Guest routine to power off. */
+	 * the Guest routine to power off, and the reboot hook to our restart
+	 * routine. */
 	pm_power_off = lguest_power_off;
-
 	machine_ops.restart = lguest_restart;
+
 	/* Now we're set up, call start_kernel() in init/main.c and we proceed
 	 * to boot as normal.  It never returns. */
 	start_kernel();
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index 95b6fbcded63..5c7cef34c9e7 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,13 +5,20 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 This is where we begin: head.S notes that the boot header's platform
- * type field is "1" (lguest), so calls us here.
+/*G:020 Our story starts with the kernel booting into startup_32 in
+ * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
+ * the bootloader (the Launcher in our case).
+ *
+ * The startup_32 function does very little: it clears the uninitialized global
+ * C variables which we expect to be zero (ie. BSS) and then copies the boot
+ * header and kernel command line somewhere safe.  Finally it checks the
+ * 'hardware_subarch' field.  This was introduced in 2.6.24 for lguest and Xen:
+ * if it's set to '1' (lguest's assigned number), then it calls us here.
  *
  * WARNING: be very careful here!  We're running at addresses equal to physical
  * addesses (around 0), not above PAGE_OFFSET as most code expectes
  * (eg. 0xC0000000).  Jumps are relative, so they're OK, but we can't touch any
- * data.
+ * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
  * boot. */
@@ -24,7 +31,7 @@ ENTRY(lguest_entry)
 	int $LGUEST_TRAP_ENTRY
 
 	/* The Host put the toplevel pagetable in lguest_data.pgdir.  The movsl
-	 * instruction uses %esi implicitly as the source for the copy we'
+	 * instruction uses %esi implicitly as the source for the copy we're
 	 * about to do. */
 	movl lguest_data - __PAGE_OFFSET + LGUEST_DATA_pgdir, %esi
 
diff --git a/arch/x86/lib/memcpy_32.c b/arch/x86/lib/memcpy_32.c
index 37756b6fb329..5415a9d06f53 100644
--- a/arch/x86/lib/memcpy_32.c
+++ b/arch/x86/lib/memcpy_32.c
@@ -25,7 +25,7 @@ void *memmove(void *dest, const void *src, size_t n)
 	int d0, d1, d2;
 
 	if (dest < src) {
-		memcpy(dest,src,n);
+		memcpy(dest, src, n);
 	} else {
 		__asm__ __volatile__(
 			"std\n\t"
diff --git a/arch/x86/lib/memmove_64.c b/arch/x86/lib/memmove_64.c
index 80175e47b190..0a33909bf122 100644
--- a/arch/x86/lib/memmove_64.c
+++ b/arch/x86/lib/memmove_64.c
@@ -6,10 +6,10 @@
 #include <linux/module.h>
 
 #undef memmove
-void *memmove(void * dest,const void *src,size_t count)
+void *memmove(void *dest, const void *src, size_t count)
 {
-	if (dest < src) { 
-		return memcpy(dest,src,count);
+	if (dest < src) {
+		return memcpy(dest, src, count);
 	} else {
 		char *p = dest + count;
 		const char *s = src + count;
@@ -17,5 +17,5 @@ void *memmove(void * dest,const void *src,size_t count)
 			*--p = *--s;
 	}
 	return dest;
-} 
+}
 EXPORT_SYMBOL(memmove);
diff --git a/arch/x86/lib/mmx_32.c b/arch/x86/lib/mmx_32.c
index cc9b4a4450f3..c9f2d9ba8dd8 100644
--- a/arch/x86/lib/mmx_32.c
+++ b/arch/x86/lib/mmx_32.c
@@ -1,32 +1,30 @@
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/hardirq.h>
-#include <linux/module.h>
-
-#include <asm/asm.h>
-#include <asm/i387.h>
-
-
 /*
  *	MMX 3DNow! library helper functions
  *
  *	To do:
- *	We can use MMX just for prefetch in IRQ's. This may be a win. 
+ *	We can use MMX just for prefetch in IRQ's. This may be a win.
  *		(reported so on K6-III)
  *	We should use a better code neutral filler for the short jump
  *		leal ebx. [ebx] is apparently best for K6-2, but Cyrix ??
  *	We also want to clobber the filler register so we don't get any
- *		register forwarding stalls on the filler. 
+ *		register forwarding stalls on the filler.
  *
  *	Add *user handling. Checksums are not a win with MMX on any CPU
  *	tested so far for any MMX solution figured.
  *
- *	22/09/2000 - Arjan van de Ven 
- *		Improved for non-egineering-sample Athlons 
+ *	22/09/2000 - Arjan van de Ven
+ *		Improved for non-egineering-sample Athlons
  *
  */
- 
+#include <linux/hardirq.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+
+#include <asm/i387.h>
+#include <asm/asm.h>
+
 void *_mmx_memcpy(void *to, const void *from, size_t len)
 {
 	void *p;
@@ -51,12 +49,10 @@ void *_mmx_memcpy(void *to, const void *from, size_t len)
 		"3: movw $0x1AEB, 1b\n"	/* jmp on 26 bytes */
 		"   jmp 2b\n"
 		".previous\n"
-		_ASM_EXTABLE(1b,3b)
-		: : "r" (from) );
-		
-	
-	for(; i>5; i--)
-	{
+			_ASM_EXTABLE(1b, 3b)
+			: : "r" (from));
+
+	for ( ; i > 5; i--) {
 		__asm__ __volatile__ (
 		"1:  prefetch 320(%0)\n"
 		"2:  movq (%0), %%mm0\n"
@@ -79,14 +75,14 @@ void *_mmx_memcpy(void *to, const void *from, size_t len)
 		"3: movw $0x05EB, 1b\n"	/* jmp on 5 bytes */
 		"   jmp 2b\n"
 		".previous\n"
-		_ASM_EXTABLE(1b,3b)
-		: : "r" (from), "r" (to) : "memory");
-		from+=64;
-		to+=64;
+			_ASM_EXTABLE(1b, 3b)
+			: : "r" (from), "r" (to) : "memory");
+
+		from += 64;
+		to += 64;
 	}
 
-	for(; i>0; i--)
-	{
+	for ( ; i > 0; i--) {
 		__asm__ __volatile__ (
 		"  movq (%0), %%mm0\n"
 		"  movq 8(%0), %%mm1\n"
@@ -104,17 +100,20 @@ void *_mmx_memcpy(void *to, const void *from, size_t len)
 		"  movq %%mm1, 40(%1)\n"
 		"  movq %%mm2, 48(%1)\n"
 		"  movq %%mm3, 56(%1)\n"
-		: : "r" (from), "r" (to) : "memory");
-		from+=64;
-		to+=64;
+			: : "r" (from), "r" (to) : "memory");
+
+		from += 64;
+		to += 64;
 	}
 	/*
-	 *	Now do the tail of the block
+	 * Now do the tail of the block:
 	 */
-	__memcpy(to, from, len&63);
+	__memcpy(to, from, len & 63);
 	kernel_fpu_end();
+
 	return p;
 }
+EXPORT_SYMBOL(_mmx_memcpy);
 
 #ifdef CONFIG_MK7
 
@@ -128,13 +127,12 @@ static void fast_clear_page(void *page)
 	int i;
 
 	kernel_fpu_begin();
-	
+
 	__asm__ __volatile__ (
 		"  pxor %%mm0, %%mm0\n" : :
 	);
 
-	for(i=0;i<4096/64;i++)
-	{
+	for (i = 0; i < 4096/64; i++) {
 		__asm__ __volatile__ (
 		"  movntq %%mm0, (%0)\n"
 		"  movntq %%mm0, 8(%0)\n"
@@ -145,14 +143,15 @@ static void fast_clear_page(void *page)
 		"  movntq %%mm0, 48(%0)\n"
 		"  movntq %%mm0, 56(%0)\n"
 		: : "r" (page) : "memory");
-		page+=64;
+		page += 64;
 	}
-	/* since movntq is weakly-ordered, a "sfence" is needed to become
-	 * ordered again.
+
+	/*
+	 * Since movntq is weakly-ordered, a "sfence" is needed to become
+	 * ordered again:
 	 */
-	__asm__ __volatile__ (
-		"  sfence \n" : :
-	);
+	__asm__ __volatile__("sfence\n"::);
+
 	kernel_fpu_end();
 }
 
@@ -162,10 +161,11 @@ static void fast_copy_page(void *to, void *from)
 
 	kernel_fpu_begin();
 
-	/* maybe the prefetch stuff can go before the expensive fnsave...
+	/*
+	 * maybe the prefetch stuff can go before the expensive fnsave...
 	 * but that is for later. -AV
 	 */
-	__asm__ __volatile__ (
+	__asm__ __volatile__(
 		"1: prefetch (%0)\n"
 		"   prefetch 64(%0)\n"
 		"   prefetch 128(%0)\n"
@@ -176,11 +176,9 @@ static void fast_copy_page(void *to, void *from)
 		"3: movw $0x1AEB, 1b\n"	/* jmp on 26 bytes */
 		"   jmp 2b\n"
 		".previous\n"
-		_ASM_EXTABLE(1b,3b)
-		: : "r" (from) );
+			_ASM_EXTABLE(1b, 3b) : : "r" (from));
 
-	for(i=0; i<(4096-320)/64; i++)
-	{
+	for (i = 0; i < (4096-320)/64; i++) {
 		__asm__ __volatile__ (
 		"1: prefetch 320(%0)\n"
 		"2: movq (%0), %%mm0\n"
@@ -203,13 +201,13 @@ static void fast_copy_page(void *to, void *from)
 		"3: movw $0x05EB, 1b\n"	/* jmp on 5 bytes */
 		"   jmp 2b\n"
 		".previous\n"
-		_ASM_EXTABLE(1b,3b)
-		: : "r" (from), "r" (to) : "memory");
-		from+=64;
-		to+=64;
+		_ASM_EXTABLE(1b, 3b) : : "r" (from), "r" (to) : "memory");
+
+		from += 64;
+		to += 64;
 	}
-	for(i=(4096-320)/64; i<4096/64; i++)
-	{
+
+	for (i = (4096-320)/64; i < 4096/64; i++) {
 		__asm__ __volatile__ (
 		"2: movq (%0), %%mm0\n"
 		"   movntq %%mm0, (%1)\n"
@@ -227,37 +225,34 @@ static void fast_copy_page(void *to, void *from)
 		"   movntq %%mm6, 48(%1)\n"
 		"   movq 56(%0), %%mm7\n"
 		"   movntq %%mm7, 56(%1)\n"
-		: : "r" (from), "r" (to) : "memory");
-		from+=64;
-		to+=64;
+			: : "r" (from), "r" (to) : "memory");
+		from += 64;
+		to += 64;
 	}
-	/* since movntq is weakly-ordered, a "sfence" is needed to become
-	 * ordered again.
+	/*
+	 * Since movntq is weakly-ordered, a "sfence" is needed to become
+	 * ordered again:
 	 */
-	__asm__ __volatile__ (
-		"  sfence \n" : :
-	);
+	__asm__ __volatile__("sfence \n"::);
 	kernel_fpu_end();
 }
 
-#else
+#else /* CONFIG_MK7 */
 
 /*
  *	Generic MMX implementation without K7 specific streaming
  */
- 
 static void fast_clear_page(void *page)
 {
 	int i;
-	
+
 	kernel_fpu_begin();
-	
+
 	__asm__ __volatile__ (
 		"  pxor %%mm0, %%mm0\n" : :
 	);
 
-	for(i=0;i<4096/128;i++)
-	{
+	for (i = 0; i < 4096/128; i++) {
 		__asm__ __volatile__ (
 		"  movq %%mm0, (%0)\n"
 		"  movq %%mm0, 8(%0)\n"
@@ -275,8 +270,8 @@ static void fast_clear_page(void *page)
 		"  movq %%mm0, 104(%0)\n"
 		"  movq %%mm0, 112(%0)\n"
 		"  movq %%mm0, 120(%0)\n"
-		: : "r" (page) : "memory");
-		page+=128;
+			: : "r" (page) : "memory");
+		page += 128;
 	}
 
 	kernel_fpu_end();
@@ -285,8 +280,7 @@ static void fast_clear_page(void *page)
 static void fast_copy_page(void *to, void *from)
 {
 	int i;
-	
-	
+
 	kernel_fpu_begin();
 
 	__asm__ __volatile__ (
@@ -300,11 +294,9 @@ static void fast_copy_page(void *to, void *from)
 		"3: movw $0x1AEB, 1b\n"	/* jmp on 26 bytes */
 		"   jmp 2b\n"
 		".previous\n"
-		_ASM_EXTABLE(1b,3b)
-		: : "r" (from) );
+			_ASM_EXTABLE(1b, 3b) : : "r" (from));
 
-	for(i=0; i<4096/64; i++)
-	{
+	for (i = 0; i < 4096/64; i++) {
 		__asm__ __volatile__ (
 		"1: prefetch 320(%0)\n"
 		"2: movq (%0), %%mm0\n"
@@ -327,60 +319,59 @@ static void fast_copy_page(void *to, void *from)
 		"3: movw $0x05EB, 1b\n"	/* jmp on 5 bytes */
 		"   jmp 2b\n"
 		".previous\n"
-		_ASM_EXTABLE(1b,3b)
-		: : "r" (from), "r" (to) : "memory");
-		from+=64;
-		to+=64;
+			_ASM_EXTABLE(1b, 3b)
+			: : "r" (from), "r" (to) : "memory");
+
+		from += 64;
+		to += 64;
 	}
 	kernel_fpu_end();
 }
 
-
-#endif
+#endif /* !CONFIG_MK7 */
 
 /*
- *	Favour MMX for page clear and copy. 
+ * Favour MMX for page clear and copy:
  */
-
-static void slow_zero_page(void * page)
+static void slow_zero_page(void *page)
 {
 	int d0, d1;
-	__asm__ __volatile__( \
-		"cld\n\t" \
-		"rep ; stosl" \
-		: "=&c" (d0), "=&D" (d1)
-		:"a" (0),"1" (page),"0" (1024)
-		:"memory");
+
+	__asm__ __volatile__(
+		"cld\n\t"
+		"rep ; stosl"
+
+			: "=&c" (d0), "=&D" (d1)
+			:"a" (0), "1" (page), "0" (1024)
+			:"memory");
 }
- 
-void mmx_clear_page(void * page)
+
+void mmx_clear_page(void *page)
 {
-	if(unlikely(in_interrupt()))
+	if (unlikely(in_interrupt()))
 		slow_zero_page(page);
 	else
 		fast_clear_page(page);
 }
+EXPORT_SYMBOL(mmx_clear_page);
 
 static void slow_copy_page(void *to, void *from)
 {
 	int d0, d1, d2;
-	__asm__ __volatile__( \
-		"cld\n\t" \
-		"rep ; movsl" \
-		: "=&c" (d0), "=&D" (d1), "=&S" (d2) \
-		: "0" (1024),"1" ((long) to),"2" ((long) from) \
+
+	__asm__ __volatile__(
+		"cld\n\t"
+		"rep ; movsl"
+		: "=&c" (d0), "=&D" (d1), "=&S" (d2)
+		: "0" (1024), "1" ((long) to), "2" ((long) from)
 		: "memory");
 }
-  
 
 void mmx_copy_page(void *to, void *from)
 {
-	if(unlikely(in_interrupt()))
+	if (unlikely(in_interrupt()))
 		slow_copy_page(to, from);
 	else
 		fast_copy_page(to, from);
 }
-
-EXPORT_SYMBOL(_mmx_memcpy);
-EXPORT_SYMBOL(mmx_clear_page);
 EXPORT_SYMBOL(mmx_copy_page);
diff --git a/arch/x86/lib/semaphore_32.S b/arch/x86/lib/semaphore_32.S
index 3899bd37fdf0..648fe4741782 100644
--- a/arch/x86/lib/semaphore_32.S
+++ b/arch/x86/lib/semaphore_32.S
@@ -30,89 +30,6 @@
  * value or just clobbered..
  */
 	.section .sched.text, "ax"
-ENTRY(__down_failed)
-	CFI_STARTPROC
-	FRAME
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edx,0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ecx,0
-	call __down
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE ecx
-	popl %edx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE edx
-	ENDFRAME
-	ret
-	CFI_ENDPROC
-	ENDPROC(__down_failed)
-
-ENTRY(__down_failed_interruptible)
-	CFI_STARTPROC
-	FRAME
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edx,0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ecx,0
-	call __down_interruptible
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE ecx
-	popl %edx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE edx
-	ENDFRAME
-	ret
-	CFI_ENDPROC
-	ENDPROC(__down_failed_interruptible)
-
-ENTRY(__down_failed_trylock)
-	CFI_STARTPROC
-	FRAME
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edx,0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ecx,0
-	call __down_trylock
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE ecx
-	popl %edx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE edx
-	ENDFRAME
-	ret
-	CFI_ENDPROC
-	ENDPROC(__down_failed_trylock)
-
-ENTRY(__up_wakeup)
-	CFI_STARTPROC
-	FRAME
-	pushl %edx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET edx,0
-	pushl %ecx
-	CFI_ADJUST_CFA_OFFSET 4
-	CFI_REL_OFFSET ecx,0
-	call __up
-	popl %ecx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE ecx
-	popl %edx
-	CFI_ADJUST_CFA_OFFSET -4
-	CFI_RESTORE edx
-	ENDFRAME
-	ret
-	CFI_ENDPROC
-	ENDPROC(__up_wakeup)
 
 /*
  * rw spinlock fallbacks
diff --git a/arch/x86/lib/string_32.c b/arch/x86/lib/string_32.c
index c2c0504a3071..94972e7c094d 100644
--- a/arch/x86/lib/string_32.c
+++ b/arch/x86/lib/string_32.c
@@ -14,25 +14,25 @@
 #include <linux/module.h>
 
 #ifdef __HAVE_ARCH_STRCPY
-char *strcpy(char * dest,const char *src)
+char *strcpy(char *dest, const char *src)
 {
 	int d0, d1, d2;
-	asm volatile( "1:\tlodsb\n\t"
+	asm volatile("1:\tlodsb\n\t"
 		"stosb\n\t"
 		"testb %%al,%%al\n\t"
 		"jne 1b"
 		: "=&S" (d0), "=&D" (d1), "=&a" (d2)
-		:"0" (src),"1" (dest) : "memory");
+		:"0" (src), "1" (dest) : "memory");
 	return dest;
 }
 EXPORT_SYMBOL(strcpy);
 #endif
 
 #ifdef __HAVE_ARCH_STRNCPY
-char *strncpy(char * dest,const char *src,size_t count)
+char *strncpy(char *dest, const char *src, size_t count)
 {
 	int d0, d1, d2, d3;
-	asm volatile( "1:\tdecl %2\n\t"
+	asm volatile("1:\tdecl %2\n\t"
 		"js 2f\n\t"
 		"lodsb\n\t"
 		"stosb\n\t"
@@ -42,17 +42,17 @@ char *strncpy(char * dest,const char *src,size_t count)
 		"stosb\n"
 		"2:"
 		: "=&S" (d0), "=&D" (d1), "=&c" (d2), "=&a" (d3)
-		:"0" (src),"1" (dest),"2" (count) : "memory");
+		:"0" (src), "1" (dest), "2" (count) : "memory");
 	return dest;
 }
 EXPORT_SYMBOL(strncpy);
 #endif
 
 #ifdef __HAVE_ARCH_STRCAT
-char *strcat(char * dest,const char * src)
+char *strcat(char *dest, const char *src)
 {
 	int d0, d1, d2, d3;
-	asm volatile( "repne\n\t"
+	asm volatile("repne\n\t"
 		"scasb\n\t"
 		"decl %1\n"
 		"1:\tlodsb\n\t"
@@ -67,10 +67,10 @@ EXPORT_SYMBOL(strcat);
 #endif
 
 #ifdef __HAVE_ARCH_STRNCAT
-char *strncat(char * dest,const char * src,size_t count)
+char *strncat(char *dest, const char *src, size_t count)
 {
 	int d0, d1, d2, d3;
-	asm volatile( "repne\n\t"
+	asm volatile("repne\n\t"
 		"scasb\n\t"
 		"decl %1\n\t"
 		"movl %8,%3\n"
@@ -83,7 +83,7 @@ char *strncat(char * dest,const char * src,size_t count)
 		"2:\txorl %2,%2\n\t"
 		"stosb"
 		: "=&S" (d0), "=&D" (d1), "=&a" (d2), "=&c" (d3)
-		: "0" (src),"1" (dest),"2" (0),"3" (0xffffffffu), "g" (count)
+		: "0" (src), "1" (dest), "2" (0), "3" (0xffffffffu), "g" (count)
 		: "memory");
 	return dest;
 }
@@ -91,11 +91,11 @@ EXPORT_SYMBOL(strncat);
 #endif
 
 #ifdef __HAVE_ARCH_STRCMP
-int strcmp(const char * cs,const char * ct)
+int strcmp(const char *cs, const char *ct)
 {
 	int d0, d1;
 	int res;
-	asm volatile( "1:\tlodsb\n\t"
+	asm volatile("1:\tlodsb\n\t"
 		"scasb\n\t"
 		"jne 2f\n\t"
 		"testb %%al,%%al\n\t"
@@ -106,7 +106,7 @@ int strcmp(const char * cs,const char * ct)
 		"orb $1,%%al\n"
 		"3:"
 		:"=a" (res), "=&S" (d0), "=&D" (d1)
-		:"1" (cs),"2" (ct)
+		:"1" (cs), "2" (ct)
 		:"memory");
 	return res;
 }
@@ -114,11 +114,11 @@ EXPORT_SYMBOL(strcmp);
 #endif
 
 #ifdef __HAVE_ARCH_STRNCMP
-int strncmp(const char * cs,const char * ct,size_t count)
+int strncmp(const char *cs, const char *ct, size_t count)
 {
 	int res;
 	int d0, d1, d2;
-	asm volatile( "1:\tdecl %3\n\t"
+	asm volatile("1:\tdecl %3\n\t"
 		"js 2f\n\t"
 		"lodsb\n\t"
 		"scasb\n\t"
@@ -131,7 +131,7 @@ int strncmp(const char * cs,const char * ct,size_t count)
 		"orb $1,%%al\n"
 		"4:"
 		:"=a" (res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
-		:"1" (cs),"2" (ct),"3" (count)
+		:"1" (cs), "2" (ct), "3" (count)
 		:"memory");
 	return res;
 }
@@ -139,11 +139,11 @@ EXPORT_SYMBOL(strncmp);
 #endif
 
 #ifdef __HAVE_ARCH_STRCHR
-char *strchr(const char * s, int c)
+char *strchr(const char *s, int c)
 {
 	int d0;
-	char * res;
-	asm volatile( "movb %%al,%%ah\n"
+	char *res;
+	asm volatile("movb %%al,%%ah\n"
 		"1:\tlodsb\n\t"
 		"cmpb %%ah,%%al\n\t"
 		"je 2f\n\t"
@@ -153,7 +153,7 @@ char *strchr(const char * s, int c)
 		"2:\tmovl %1,%0\n\t"
 		"decl %0"
 		:"=a" (res), "=&S" (d0)
-		:"1" (s),"0" (c)
+		:"1" (s), "0" (c)
 		:"memory");
 	return res;
 }
@@ -161,16 +161,16 @@ EXPORT_SYMBOL(strchr);
 #endif
 
 #ifdef __HAVE_ARCH_STRLEN
-size_t strlen(const char * s)
+size_t strlen(const char *s)
 {
 	int d0;
 	int res;
-	asm volatile( "repne\n\t"
+	asm volatile("repne\n\t"
 		"scasb\n\t"
 		"notl %0\n\t"
 		"decl %0"
 		:"=c" (res), "=&D" (d0)
-		:"1" (s),"a" (0), "0" (0xffffffffu)
+		:"1" (s), "a" (0), "0" (0xffffffffu)
 		:"memory");
 	return res;
 }
@@ -178,19 +178,19 @@ EXPORT_SYMBOL(strlen);
 #endif
 
 #ifdef __HAVE_ARCH_MEMCHR
-void *memchr(const void *cs,int c,size_t count)
+void *memchr(const void *cs, int c, size_t count)
 {
 	int d0;
 	void *res;
 	if (!count)
 		return NULL;
-	asm volatile( "repne\n\t"
+	asm volatile("repne\n\t"
 		"scasb\n\t"
 		"je 1f\n\t"
 		"movl $1,%0\n"
 		"1:\tdecl %0"
 		:"=D" (res), "=&c" (d0)
-		:"a" (c),"0" (cs),"1" (count)
+		:"a" (c), "0" (cs), "1" (count)
 		:"memory");
 	return res;
 }
@@ -198,7 +198,7 @@ EXPORT_SYMBOL(memchr);
 #endif
 
 #ifdef __HAVE_ARCH_MEMSCAN
-void *memscan(void * addr, int c, size_t size)
+void *memscan(void *addr, int c, size_t size)
 {
 	if (!size)
 		return addr;
@@ -219,7 +219,7 @@ size_t strnlen(const char *s, size_t count)
 {
 	int d0;
 	int res;
-	asm volatile( "movl %2,%0\n\t"
+	asm volatile("movl %2,%0\n\t"
 		"jmp 2f\n"
 		"1:\tcmpb $0,(%0)\n\t"
 		"je 3f\n\t"
@@ -229,7 +229,7 @@ size_t strnlen(const char *s, size_t count)
 		"jne 1b\n"
 		"3:\tsubl %2,%0"
 		:"=a" (res), "=&d" (d0)
-		:"c" (s),"1" (count)
+		:"c" (s), "1" (count)
 		:"memory");
 	return res;
 }
diff --git a/arch/x86/lib/strstr_32.c b/arch/x86/lib/strstr_32.c
index a3dafbf59dae..42e8a50303f3 100644
--- a/arch/x86/lib/strstr_32.c
+++ b/arch/x86/lib/strstr_32.c
@@ -1,9 +1,9 @@
 #include <linux/string.h>
 
-char * strstr(const char * cs,const char * ct)
+char *strstr(const char *cs, const char *ct)
 {
 int	d0, d1;
-register char * __res;
+register char *__res;
 __asm__ __volatile__(
 	"movl %6,%%edi\n\t"
 	"repne\n\t"
diff --git a/arch/x86/lib/thunk_64.S b/arch/x86/lib/thunk_64.S
index 8b92d428ab02..e009251d4e9f 100644
--- a/arch/x86/lib/thunk_64.S
+++ b/arch/x86/lib/thunk_64.S
@@ -41,11 +41,6 @@
 	thunk rwsem_downgrade_thunk,rwsem_downgrade_wake
 #endif	
 	
-	thunk __down_failed,__down
-	thunk_retrax __down_failed_interruptible,__down_interruptible
-	thunk_retrax __down_failed_trylock,__down_trylock
-	thunk __up_wakeup,__up
-
 #ifdef CONFIG_TRACE_IRQFLAGS
 	thunk trace_hardirqs_on_thunk,trace_hardirqs_on
 	thunk trace_hardirqs_off_thunk,trace_hardirqs_off
diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c
index e849b9998b0e..24e60944971a 100644
--- a/arch/x86/lib/usercopy_32.c
+++ b/arch/x86/lib/usercopy_32.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * User address space access functions.
  * The non inlined parts of asm-i386/uaccess.h are here.
  *
@@ -22,14 +22,14 @@ static inline int __movsl_is_ok(unsigned long a1, unsigned long a2, unsigned lon
 #endif
 	return 1;
 }
-#define movsl_is_ok(a1,a2,n) \
-	__movsl_is_ok((unsigned long)(a1),(unsigned long)(a2),(n))
+#define movsl_is_ok(a1, a2, n) \
+	__movsl_is_ok((unsigned long)(a1), (unsigned long)(a2), (n))
 
 /*
  * Copy a null terminated string from userspace.
  */
 
-#define __do_strncpy_from_user(dst,src,count,res)			   \
+#define __do_strncpy_from_user(dst, src, count, res)			   \
 do {									   \
 	int __d0, __d1, __d2;						   \
 	might_sleep();							   \
@@ -61,7 +61,7 @@ do {									   \
  *         least @count bytes long.
  * @src:   Source address, in user space.
  * @count: Maximum number of bytes to copy, including the trailing NUL.
- * 
+ *
  * Copies a NUL-terminated string from userspace to kernel space.
  * Caller must check the specified block with access_ok() before calling
  * this function.
@@ -90,7 +90,7 @@ EXPORT_SYMBOL(__strncpy_from_user);
  *         least @count bytes long.
  * @src:   Source address, in user space.
  * @count: Maximum number of bytes to copy, including the trailing NUL.
- * 
+ *
  * Copies a NUL-terminated string from userspace to kernel space.
  *
  * On success, returns the length of the string (not including the trailing
@@ -120,7 +120,7 @@ EXPORT_SYMBOL(strncpy_from_user);
 do {									\
 	int __d0;							\
 	might_sleep();							\
-  	__asm__ __volatile__(						\
+	__asm__ __volatile__(						\
 		"0:	rep; stosl\n"					\
 		"	movl %2,%0\n"					\
 		"1:	rep; stosb\n"					\
@@ -333,17 +333,17 @@ __copy_user_zeroing_intel(void *to, const void __user *from, unsigned long size)
 	__asm__ __volatile__(
 		       "        .align 2,0x90\n"
 		       "0:      movl 32(%4), %%eax\n"
-		       "        cmpl $67, %0\n"      
-		       "        jbe 2f\n"            
+		       "        cmpl $67, %0\n"
+		       "        jbe 2f\n"
 		       "1:      movl 64(%4), %%eax\n"
-		       "        .align 2,0x90\n"     
-		       "2:      movl 0(%4), %%eax\n" 
-		       "21:     movl 4(%4), %%edx\n" 
-		       "        movl %%eax, 0(%3)\n" 
-		       "        movl %%edx, 4(%3)\n" 
-		       "3:      movl 8(%4), %%eax\n" 
-		       "31:     movl 12(%4),%%edx\n" 
-		       "        movl %%eax, 8(%3)\n" 
+		       "        .align 2,0x90\n"
+		       "2:      movl 0(%4), %%eax\n"
+		       "21:     movl 4(%4), %%edx\n"
+		       "        movl %%eax, 0(%3)\n"
+		       "        movl %%edx, 4(%3)\n"
+		       "3:      movl 8(%4), %%eax\n"
+		       "31:     movl 12(%4),%%edx\n"
+		       "        movl %%eax, 8(%3)\n"
 		       "        movl %%edx, 12(%3)\n"
 		       "4:      movl 16(%4), %%eax\n"
 		       "41:     movl 20(%4), %%edx\n"
@@ -369,38 +369,38 @@ __copy_user_zeroing_intel(void *to, const void __user *from, unsigned long size)
 		       "91:     movl 60(%4), %%edx\n"
 		       "        movl %%eax, 56(%3)\n"
 		       "        movl %%edx, 60(%3)\n"
-		       "        addl $-64, %0\n"     
-		       "        addl $64, %4\n"      
-		       "        addl $64, %3\n"      
-		       "        cmpl $63, %0\n"      
-		       "        ja  0b\n"            
-		       "5:      movl  %0, %%eax\n"   
-		       "        shrl  $2, %0\n"      
-		       "        andl $3, %%eax\n"    
-		       "        cld\n"               
-		       "6:      rep; movsl\n"   
+		       "        addl $-64, %0\n"
+		       "        addl $64, %4\n"
+		       "        addl $64, %3\n"
+		       "        cmpl $63, %0\n"
+		       "        ja  0b\n"
+		       "5:      movl  %0, %%eax\n"
+		       "        shrl  $2, %0\n"
+		       "        andl $3, %%eax\n"
+		       "        cld\n"
+		       "6:      rep; movsl\n"
 		       "        movl %%eax,%0\n"
-		       "7:      rep; movsb\n"	
-		       "8:\n"			
+		       "7:      rep; movsb\n"
+		       "8:\n"
 		       ".section .fixup,\"ax\"\n"
-		       "9:      lea 0(%%eax,%0,4),%0\n"	
-		       "16:     pushl %0\n"	
-		       "        pushl %%eax\n"	
+		       "9:      lea 0(%%eax,%0,4),%0\n"
+		       "16:     pushl %0\n"
+		       "        pushl %%eax\n"
 		       "        xorl %%eax,%%eax\n"
-		       "        rep; stosb\n"	
-		       "        popl %%eax\n"	
-		       "        popl %0\n"	
-		       "        jmp 8b\n"	
-		       ".previous\n"		
+		       "        rep; stosb\n"
+		       "        popl %%eax\n"
+		       "        popl %0\n"
+		       "        jmp 8b\n"
+		       ".previous\n"
 		       ".section __ex_table,\"a\"\n"
-		       "	.align 4\n"	   
-		       "	.long 0b,16b\n"	 
+		       "	.align 4\n"
+		       "	.long 0b,16b\n"
 		       "	.long 1b,16b\n"
 		       "	.long 2b,16b\n"
 		       "	.long 21b,16b\n"
-		       "	.long 3b,16b\n"	
+		       "	.long 3b,16b\n"
 		       "	.long 31b,16b\n"
-		       "	.long 4b,16b\n"	
+		       "	.long 4b,16b\n"
 		       "	.long 41b,16b\n"
 		       "	.long 10b,16b\n"
 		       "	.long 51b,16b\n"
@@ -412,9 +412,9 @@ __copy_user_zeroing_intel(void *to, const void __user *from, unsigned long size)
 		       "	.long 81b,16b\n"
 		       "	.long 14b,16b\n"
 		       "	.long 91b,16b\n"
-		       "	.long 6b,9b\n"	
-		       "        .long 7b,16b\n" 
-		       ".previous"		
+		       "	.long 6b,9b\n"
+		       "        .long 7b,16b\n"
+		       ".previous"
 		       : "=&c"(size), "=&D" (d0), "=&S" (d1)
 		       :  "1"(to), "2"(from), "0"(size)
 		       : "eax", "edx", "memory");
@@ -429,7 +429,7 @@ __copy_user_zeroing_intel(void *to, const void __user *from, unsigned long size)
 static unsigned long __copy_user_zeroing_intel_nocache(void *to,
 				const void __user *from, unsigned long size)
 {
-        int d0, d1;
+	int d0, d1;
 
 	__asm__ __volatile__(
 	       "        .align 2,0x90\n"
@@ -526,7 +526,7 @@ static unsigned long __copy_user_zeroing_intel_nocache(void *to,
 static unsigned long __copy_user_intel_nocache(void *to,
 				const void __user *from, unsigned long size)
 {
-        int d0, d1;
+	int d0, d1;
 
 	__asm__ __volatile__(
 	       "        .align 2,0x90\n"
@@ -629,7 +629,7 @@ unsigned long __copy_user_zeroing_intel_nocache(void *to,
 #endif /* CONFIG_X86_INTEL_USERCOPY */
 
 /* Generic arbitrary sized copy.  */
-#define __copy_user(to,from,size)					\
+#define __copy_user(to, from, size)					\
 do {									\
 	int __d0, __d1, __d2;						\
 	__asm__ __volatile__(						\
@@ -665,7 +665,7 @@ do {									\
 		: "memory");						\
 } while (0)
 
-#define __copy_user_zeroing(to,from,size)				\
+#define __copy_user_zeroing(to, from, size)				\
 do {									\
 	int __d0, __d1, __d2;						\
 	__asm__ __volatile__(						\
@@ -712,7 +712,7 @@ unsigned long __copy_to_user_ll(void __user *to, const void *from,
 {
 #ifndef CONFIG_X86_WP_WORKS_OK
 	if (unlikely(boot_cpu_data.wp_works_ok == 0) &&
-			((unsigned long )to) < TASK_SIZE) {
+			((unsigned long)to) < TASK_SIZE) {
 		/*
 		 * When we are in an atomic section (see
 		 * mm/filemap.c:file_read_actor), return the full
@@ -721,26 +721,26 @@ unsigned long __copy_to_user_ll(void __user *to, const void *from,
 		if (in_atomic())
 			return n;
 
-		/* 
+		/*
 		 * CPU does not honor the WP bit when writing
 		 * from supervisory mode, and due to preemption or SMP,
 		 * the page tables can change at any time.
 		 * Do it manually.	Manfred <manfred@colorfullife.com>
 		 */
 		while (n) {
-		      	unsigned long offset = ((unsigned long)to)%PAGE_SIZE;
+			unsigned long offset = ((unsigned long)to)%PAGE_SIZE;
 			unsigned long len = PAGE_SIZE - offset;
 			int retval;
 			struct page *pg;
 			void *maddr;
-			
+
 			if (len > n)
 				len = n;
 
 survive:
 			down_read(&current->mm->mmap_sem);
 			retval = get_user_pages(current, current->mm,
-					(unsigned long )to, 1, 1, 0, &pg, NULL);
+					(unsigned long)to, 1, 1, 0, &pg, NULL);
 
 			if (retval == -ENOMEM && is_global_init(current)) {
 				up_read(&current->mm->mmap_sem);
@@ -750,8 +750,8 @@ survive:
 
 			if (retval != 1) {
 				up_read(&current->mm->mmap_sem);
-		       		break;
-		       	}
+				break;
+			}
 
 			maddr = kmap_atomic(pg, KM_USER0);
 			memcpy(maddr + offset, from, len);
@@ -802,12 +802,12 @@ unsigned long __copy_from_user_ll_nocache(void *to, const void __user *from,
 					unsigned long n)
 {
 #ifdef CONFIG_X86_INTEL_USERCOPY
-	if ( n > 64 && cpu_has_xmm2)
-                n = __copy_user_zeroing_intel_nocache(to, from, n);
+	if (n > 64 && cpu_has_xmm2)
+		n = __copy_user_zeroing_intel_nocache(to, from, n);
 	else
 		__copy_user_zeroing(to, from, n);
 #else
-        __copy_user_zeroing(to, from, n);
+	__copy_user_zeroing(to, from, n);
 #endif
 	return n;
 }
@@ -817,12 +817,12 @@ unsigned long __copy_from_user_ll_nocache_nozero(void *to, const void __user *fr
 					unsigned long n)
 {
 #ifdef CONFIG_X86_INTEL_USERCOPY
-	if ( n > 64 && cpu_has_xmm2)
-                n = __copy_user_intel_nocache(to, from, n);
+	if (n > 64 && cpu_has_xmm2)
+		n = __copy_user_intel_nocache(to, from, n);
 	else
 		__copy_user(to, from, n);
 #else
-        __copy_user(to, from, n);
+	__copy_user(to, from, n);
 #endif
 	return n;
 }
diff --git a/arch/x86/mach-generic/bigsmp.c b/arch/x86/mach-generic/bigsmp.c
index 292a225edabe..95fc463056d0 100644
--- a/arch/x86/mach-generic/bigsmp.c
+++ b/arch/x86/mach-generic/bigsmp.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * APIC driver for "bigsmp" XAPIC machines with more than 8 virtual CPUs.
  * Drives the local APIC in "clustered mode".
  */
@@ -32,26 +32,26 @@ static int hp_ht_bigsmp(const struct dmi_system_id *d)
 
 
 static const struct dmi_system_id bigsmp_dmi_table[] = {
-	{ hp_ht_bigsmp, "HP ProLiant DL760 G2", {
-		DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-		DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
-	}},
-
-	{ hp_ht_bigsmp, "HP ProLiant DL740", {
-		DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-		DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
-	 }},
+	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
+	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+	DMI_MATCH(DMI_BIOS_VERSION, "P44-"),}
+	},
+
+	{ hp_ht_bigsmp, "HP ProLiant DL740",
+	{ DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+	DMI_MATCH(DMI_BIOS_VERSION, "P47-"),}
+	},
 	 { }
 };
 
 
 static int probe_bigsmp(void)
-{ 
+{
 	if (def_to_bigsmp)
-        	dmi_bigsmp = 1;
+	dmi_bigsmp = 1;
 	else
 		dmi_check_system(bigsmp_dmi_table);
-	return dmi_bigsmp; 
-} 
+	return dmi_bigsmp;
+}
 
-struct genapic apic_bigsmp = APIC_INIT("bigsmp", probe_bigsmp); 
+struct genapic apic_bigsmp = APIC_INIT("bigsmp", probe_bigsmp);
diff --git a/arch/x86/mach-generic/default.c b/arch/x86/mach-generic/default.c
index 1af0cc7648f0..9e835a11a13a 100644
--- a/arch/x86/mach-generic/default.c
+++ b/arch/x86/mach-generic/default.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * Default generic APIC driver. This handles up to 8 CPUs.
  */
 #define APIC_DEFINITION 1
@@ -19,8 +19,8 @@
 
 /* should be called last. */
 static int probe_default(void)
-{ 
+{
 	return 1;
-} 
+}
 
-struct genapic apic_default = APIC_INIT("default", probe_default); 
+struct genapic apic_default = APIC_INIT("default", probe_default);
diff --git a/arch/x86/mach-generic/probe.c b/arch/x86/mach-generic/probe.c
index f410d3cb5659..c5ae751b994a 100644
--- a/arch/x86/mach-generic/probe.c
+++ b/arch/x86/mach-generic/probe.c
@@ -1,8 +1,9 @@
-/* Copyright 2003 Andi Kleen, SuSE Labs. 
- * Subject to the GNU Public License, v.2 
- * 
+/*
+ * Copyright 2003 Andi Kleen, SuSE Labs.
+ * Subject to the GNU Public License, v.2
+ *
  * Generic x86 APIC driver probe layer.
- */  
+ */
 #include <linux/threads.h>
 #include <linux/cpumask.h>
 #include <linux/string.h>
@@ -24,7 +25,7 @@ struct genapic *genapic = &apic_default;
 
 static struct genapic *apic_probe[] __initdata = {
 	&apic_summit,
-	&apic_bigsmp, 
+	&apic_bigsmp,
 	&apic_es7000,
 	&apic_default,	/* must be last */
 	NULL,
@@ -69,7 +70,7 @@ void __init generic_bigsmp_probe(void)
 }
 
 void __init generic_apic_probe(void)
-{ 
+{
 	if (!cmdline_apic) {
 		int i;
 		for (i = 0; apic_probe[i]; i++) {
@@ -83,40 +84,40 @@ void __init generic_apic_probe(void)
 			panic("Didn't find an APIC driver");
 	}
 	printk(KERN_INFO "Using APIC driver %s\n", genapic->name);
-} 
+}
 
 /* These functions can switch the APIC even after the initial ->probe() */
 
 int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid)
-{ 
+{
 	int i;
-	for (i = 0; apic_probe[i]; ++i) { 
-		if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { 
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->mps_oem_check(mpc, oem, productid)) {
 			if (!cmdline_apic) {
 				genapic = apic_probe[i];
 				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 				       genapic->name);
 			}
 			return 1;
-		} 
-	} 
+		}
+	}
 	return 0;
-} 
+}
 
 int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
 	int i;
-	for (i = 0; apic_probe[i]; ++i) { 
-		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { 
+	for (i = 0; apic_probe[i]; ++i) {
+		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) {
 			if (!cmdline_apic) {
 				genapic = apic_probe[i];
 				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
 				       genapic->name);
 			}
 			return 1;
-		} 
-	} 
-	return 0;	
+		}
+	}
+	return 0;
 }
 
 int hard_smp_processor_id(void)
diff --git a/arch/x86/mach-generic/summit.c b/arch/x86/mach-generic/summit.c
index 74883ccb8f73..a97ea0f35b1e 100644
--- a/arch/x86/mach-generic/summit.c
+++ b/arch/x86/mach-generic/summit.c
@@ -1,4 +1,4 @@
-/* 
+/*
  * APIC driver for the IBM "Summit" chipset.
  */
 #define APIC_DEFINITION 1
@@ -19,9 +19,9 @@
 #include <asm/mach-summit/mach_mpparse.h>
 
 static int probe_summit(void)
-{ 
+{
 	/* probed later in mptable/ACPI hooks */
 	return 0;
-} 
+}
 
-struct genapic apic_summit = APIC_INIT("summit", probe_summit); 
+struct genapic apic_summit = APIC_INIT("summit", probe_summit);
diff --git a/arch/x86/mach-rdc321x/Makefile b/arch/x86/mach-rdc321x/Makefile
index 1faac8125e3d..8325b4ca431c 100644
--- a/arch/x86/mach-rdc321x/Makefile
+++ b/arch/x86/mach-rdc321x/Makefile
@@ -1,5 +1,5 @@
 #
 # Makefile for the RDC321x specific parts of the kernel
 #
-obj-$(CONFIG_X86_RDC321X)        := gpio.o platform.o wdt.o
+obj-$(CONFIG_X86_RDC321X)        := gpio.o platform.o
 
diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c
index 031269163bd6..247f33d3a407 100644
--- a/arch/x86/mach-rdc321x/gpio.c
+++ b/arch/x86/mach-rdc321x/gpio.c
@@ -1,91 +1,194 @@
 /*
- *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
- *  	RDC321x architecture specific GPIO support
+ *  GPIO support for RDC SoC R3210/R8610
+ *
+ *  Copyright (C) 2007, Florian Fainelli <florian@openwrt.org>
+ *  Copyright (C) 2008, Volker Weiss <dev@tintuc.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
  */
 
-#include <linux/autoconf.h>
-#include <linux/init.h>
+
+#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/types.h>
 #include <linux/module.h>
-#include <linux/delay.h>
 
+#include <asm/gpio.h>
 #include <asm/mach-rdc321x/rdc321x_defs.h>
 
-static inline int rdc_gpio_is_valid(unsigned gpio)
+
+/* spin lock to protect our private copy of GPIO data register plus
+   the access to PCI conf registers. */
+static DEFINE_SPINLOCK(gpio_lock);
+
+/* copy of GPIO data registers */
+static u32 gpio_data_reg1;
+static u32 gpio_data_reg2;
+
+static u32 gpio_request_data[2];
+
+
+static inline void rdc321x_conf_write(unsigned addr, u32 value)
 {
-	return (gpio <= RDC_MAX_GPIO);
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	outl(value, RDC3210_CFGREG_DATA);
 }
 
-static unsigned int rdc_gpio_read(unsigned gpio)
+static inline void rdc321x_conf_or(unsigned addr, u32 value)
 {
-	unsigned int val;
-
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
-	outl(val, RDC3210_CFGREG_ADDR);
-	udelay(10);
-	val = inl(RDC3210_CFGREG_DATA);
-	val |= (0x1 << (gpio & 0x1F));
-	outl(val, RDC3210_CFGREG_DATA);
-	udelay(10);
-	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
-	outl(val, RDC3210_CFGREG_ADDR);
-	udelay(10);
-	val = inl(RDC3210_CFGREG_DATA);
-
-	return val;
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+	value |= inl(RDC3210_CFGREG_DATA);
+	outl(value, RDC3210_CFGREG_DATA);
 }
 
-static void rdc_gpio_write(unsigned int val)
+static inline u32 rdc321x_conf_read(unsigned addr)
 {
-	if (val) {
-		outl(val, RDC3210_CFGREG_DATA);
-		udelay(10);
-	}
+	outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR);
+
+	return inl(RDC3210_CFGREG_DATA);
 }
 
-int rdc_gpio_get_value(unsigned gpio)
+/* configure pin as GPIO */
+static void rdc321x_configure_gpio(unsigned gpio)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	rdc321x_conf_or(gpio < 32
+		? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2,
+		1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+
+/* initially setup the 2 copies of the gpio data registers.
+   This function must be called by the platform setup code. */
+void __init rdc321x_gpio_setup()
+{
+	/* this might not be, what others (BIOS, bootloader, etc.)
+	   wrote to these registers before, but it's a good guess. Still
+	   better than just using 0xffffffff. */
+
+	gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1);
+	gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2);
+}
+
+/* determine, if gpio number is valid */
+static inline int rdc321x_is_gpio(unsigned gpio)
+{
+	return gpio <= RDC321X_MAX_GPIO;
+}
+
+/* request GPIO */
+int rdc_gpio_request(unsigned gpio, const char *label)
 {
-	if (rdc_gpio_is_valid(gpio))
-		return (int)rdc_gpio_read(gpio);
-	else
+	unsigned long flags;
+
+	if (!rdc321x_is_gpio(gpio))
 		return -EINVAL;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f)))
+		goto inuse;
+	gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+
+	return 0;
+inuse:
+	spin_unlock_irqrestore(&gpio_lock, flags);
+	return -EINVAL;
 }
-EXPORT_SYMBOL(rdc_gpio_get_value);
+EXPORT_SYMBOL(rdc_gpio_request);
 
-void rdc_gpio_set_value(unsigned gpio, int value)
+/* release previously-claimed GPIO */
+void rdc_gpio_free(unsigned gpio)
 {
-	unsigned int val;
+	unsigned long flags;
 
-	if (!rdc_gpio_is_valid(gpio))
+	if (!rdc321x_is_gpio(gpio))
 		return;
 
-	val = rdc_gpio_read(gpio);
+	spin_lock_irqsave(&gpio_lock, flags);
+	gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f));
+	spin_unlock_irqrestore(&gpio_lock, flags);
+}
+EXPORT_SYMBOL(rdc_gpio_free);
+
+/* read GPIO pin */
+int rdc_gpio_get_value(unsigned gpio)
+{
+	u32 reg;
+	unsigned long flags;
+
+	spin_lock_irqsave(&gpio_lock, flags);
+	reg = rdc321x_conf_read(gpio < 32
+		? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2);
+	spin_unlock_irqrestore(&gpio_lock, flags);
 
-	if (value)
-		val &= ~(0x1 << (gpio & 0x1F));
-	else
-		val |= (0x1 << (gpio & 0x1F));
+	return (1 << (gpio & 0x1f)) & reg ? 1 : 0;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
 
-	rdc_gpio_write(val);
+/* set GPIO pin to value */
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned long flags;
+	u32 reg;
+
+	reg = 1 << (gpio & 0x1f);
+	if (gpio < 32) {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg1 |= reg;
+		else
+			gpio_data_reg1 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	} else {
+		spin_lock_irqsave(&gpio_lock, flags);
+		if (value)
+			gpio_data_reg2 |= reg;
+		else
+			gpio_data_reg2 &= ~reg;
+		rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2);
+		spin_unlock_irqrestore(&gpio_lock, flags);
+	}
 }
 EXPORT_SYMBOL(rdc_gpio_set_value);
 
+/* configure GPIO pin as input */
 int rdc_gpio_direction_input(unsigned gpio)
 {
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	rdc321x_configure_gpio(gpio);
+
 	return 0;
 }
 EXPORT_SYMBOL(rdc_gpio_direction_input);
 
+/* configure GPIO pin as output and set value */
 int rdc_gpio_direction_output(unsigned gpio, int value)
 {
+	if (!rdc321x_is_gpio(gpio))
+		return -EINVAL;
+
+	gpio_set_value(gpio, value);
+	rdc321x_configure_gpio(gpio);
+
 	return 0;
 }
 EXPORT_SYMBOL(rdc_gpio_direction_output);
-
-
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index dda6024a5862..a037041817c7 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -62,6 +62,8 @@ static struct platform_device *rdc321x_devs[] = {
 
 static int __init rdc_board_setup(void)
 {
+	rdc321x_gpio_setup();
+
 	return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
 }
 
diff --git a/arch/x86/mach-rdc321x/wdt.c b/arch/x86/mach-rdc321x/wdt.c
deleted file mode 100644
index ec5625ae7061..000000000000
--- a/arch/x86/mach-rdc321x/wdt.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/*
- * RDC321x watchdog driver
- *
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This driver is highly inspired from the cpu5_wdt driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/completion.h>
-#include <linux/jiffies.h>
-#include <linux/platform_device.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include <asm/mach-rdc321x/rdc321x_defs.h>
-
-#define RDC_WDT_MASK	0x80000000 /* Mask */
-#define RDC_WDT_EN	0x00800000 /* Enable bit */
-#define RDC_WDT_WTI	0x00200000 /* Generate CPU reset/NMI/WDT on timeout */
-#define RDC_WDT_RST	0x00100000 /* Reset bit */
-#define RDC_WDT_WIF	0x00040000 /* WDT IRQ Flag */
-#define RDC_WDT_IRT	0x00000100 /* IRQ Routing table */
-#define RDC_WDT_CNT	0x00000001 /* WDT count */
-
-#define RDC_CLS_TMR	0x80003844 /* Clear timer */
-
-#define RDC_WDT_INTERVAL	(HZ/10+1)
-
-int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-static int ticks = 1000;
-
-/* some device data */
-
-static struct {
-	struct completion stop;
-	volatile int running;
-	struct timer_list timer;
-	volatile int queue;
-	int default_ticks;
-	unsigned long inuse;
-} rdc321x_wdt_device;
-
-/* generic helper functions */
-
-static void rdc321x_wdt_trigger(unsigned long unused)
-{
-	if (rdc321x_wdt_device.running)
-		ticks--;
-
-	/* keep watchdog alive */
-	outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);
-
-	/* requeue?? */
-	if (rdc321x_wdt_device.queue && ticks)
-		mod_timer(&rdc321x_wdt_device.timer,
-				jiffies + RDC_WDT_INTERVAL);
-	else {
-		/* ticks doesn't matter anyway */
-		complete(&rdc321x_wdt_device.stop);
-	}
-
-}
-
-static void rdc321x_wdt_reset(void)
-{
-	ticks = rdc321x_wdt_device.default_ticks;
-}
-
-static void rdc321x_wdt_start(void)
-{
-	if (!rdc321x_wdt_device.queue) {
-		rdc321x_wdt_device.queue = 1;
-
-		/* Clear the timer */
-		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
-
-		/* Enable watchdog and set the timeout to 81.92 us */
-		outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
-
-		mod_timer(&rdc321x_wdt_device.timer,
-				jiffies + RDC_WDT_INTERVAL);
-	}
-
-	/* if process dies, counter is not decremented */
-	rdc321x_wdt_device.running++;
-}
-
-static int rdc321x_wdt_stop(void)
-{
-	if (rdc321x_wdt_device.running)
-		rdc321x_wdt_device.running = 0;
-
-	ticks = rdc321x_wdt_device.default_ticks;
-
-	return -EIO;
-}
-
-/* filesystem operations */
-
-static int rdc321x_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
-		return -EBUSY;
-
-	return nonseekable_open(inode, file);
-}
-
-static int rdc321x_wdt_release(struct inode *inode, struct file *file)
-{
-	clear_bit(0, &rdc321x_wdt_device.inuse);
-	return 0;
-}
-
-static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
-				unsigned int cmd, unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	unsigned int value;
-	static struct watchdog_info ident = {
-		.options = WDIOF_CARDRESET,
-		.identity = "RDC321x WDT",
-	};
-
-	switch (cmd) {
-	case WDIOC_KEEPALIVE:
-		rdc321x_wdt_reset();
-		break;
-	case WDIOC_GETSTATUS:
-		/* Read the value from the DATA register */
-		value = inl(RDC3210_CFGREG_DATA);
-		if (copy_to_user(argp, &value, sizeof(int)))
-			return -EFAULT;
-		break;
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &ident, sizeof(ident)))
-			return -EFAULT;
-		break;
-	case WDIOC_SETOPTIONS:
-		if (copy_from_user(&value, argp, sizeof(int)))
-			return -EFAULT;
-		switch (value) {
-		case WDIOS_ENABLECARD:
-			rdc321x_wdt_start();
-			break;
-		case WDIOS_DISABLECARD:
-			return rdc321x_wdt_stop();
-		default:
-			return -EINVAL;
-		}
-		break;
-	default:
-		return -ENOTTY;
-	}
-	return 0;
-}
-
-static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
-				size_t count, loff_t *ppos)
-{
-	if (!count)
-		return -EIO;
-
-	rdc321x_wdt_reset();
-
-	return count;
-}
-
-static const struct file_operations rdc321x_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.ioctl		= rdc321x_wdt_ioctl,
-	.open		= rdc321x_wdt_open,
-	.write		= rdc321x_wdt_write,
-	.release	= rdc321x_wdt_release,
-};
-
-static struct miscdevice rdc321x_wdt_misc = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &rdc321x_wdt_fops,
-};
-
-static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
-{
-	int err;
-
-	err = misc_register(&rdc321x_wdt_misc);
-	if (err < 0) {
-		printk(KERN_ERR PFX "watchdog misc_register failed\n");
-		return err;
-	}
-
-	/* Reset the watchdog */
-	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
-
-	init_completion(&rdc321x_wdt_device.stop);
-	rdc321x_wdt_device.queue = 0;
-
-	clear_bit(0, &rdc321x_wdt_device.inuse);
-
-	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
-
-	rdc321x_wdt_device.default_ticks = ticks;
-
-	printk(KERN_INFO PFX "watchdog init success\n");
-
-	return 0;
-}
-
-static int rdc321x_wdt_remove(struct platform_device *pdev)
-{
-	if (rdc321x_wdt_device.queue) {
-		rdc321x_wdt_device.queue = 0;
-		wait_for_completion(&rdc321x_wdt_device.stop);
-	}
-
-	misc_deregister(&rdc321x_wdt_misc);
-
-	return 0;
-}
-
-static struct platform_driver rdc321x_wdt_driver = {
-	.probe = rdc321x_wdt_probe,
-	.remove = rdc321x_wdt_remove,
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "rdc321x-wdt",
-	},
-};
-
-static int __init rdc321x_wdt_init(void)
-{
-	return platform_driver_register(&rdc321x_wdt_driver);
-}
-
-static void __exit rdc321x_wdt_exit(void)
-{
-	platform_driver_unregister(&rdc321x_wdt_driver);
-}
-
-module_init(rdc321x_wdt_init);
-module_exit(rdc321x_wdt_exit);
-
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("RDC321x watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/arch/x86/mach-visws/traps.c b/arch/x86/mach-visws/traps.c
index 843b67acf43b..bfac6ba10f8a 100644
--- a/arch/x86/mach-visws/traps.c
+++ b/arch/x86/mach-visws/traps.c
@@ -46,8 +46,9 @@ static __init void cobalt_init(void)
 	 */
 	set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
 	setup_local_APIC();
-	printk(KERN_INFO "Local APIC Version %#lx, ID %#lx\n",
-		apic_read(APIC_LVR), apic_read(APIC_ID));
+	printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+		(unsigned int)apic_read(APIC_LVR),
+		(unsigned int)apic_read(APIC_ID));
 
 	set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
 	set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
diff --git a/arch/x86/mach-visws/visws_apic.c b/arch/x86/mach-visws/visws_apic.c
index 710faf71a650..cef9cb1d15ac 100644
--- a/arch/x86/mach-visws/visws_apic.c
+++ b/arch/x86/mach-visws/visws_apic.c
@@ -1,6 +1,4 @@
 /*
- *	linux/arch/i386/mach-visws/visws_apic.c
- *
  *	Copyright (C) 1999 Bent Hagemark, Ingo Molnar
  *
  *  SGI Visual Workstation interrupt controller
diff --git a/arch/x86/mach-voyager/voyager_basic.c b/arch/x86/mach-voyager/voyager_basic.c
index 6a949e4edde8..46d6f8067690 100644
--- a/arch/x86/mach-voyager/voyager_basic.c
+++ b/arch/x86/mach-voyager/voyager_basic.c
@@ -2,8 +2,6 @@
  *
  * Author: J.E.J.Bottomley@HansenPartnership.com
  *
- * linux/arch/i386/kernel/voyager.c
- *
  * This file contains all the voyager specific routines for getting
  * initialisation of the architecture to function.  For additional
  * features see:
diff --git a/arch/x86/mach-voyager/voyager_cat.c b/arch/x86/mach-voyager/voyager_cat.c
index 17a7904f75b1..ecab9fff0fd1 100644
--- a/arch/x86/mach-voyager/voyager_cat.c
+++ b/arch/x86/mach-voyager/voyager_cat.c
@@ -4,8 +4,6 @@
  *
  * Author: J.E.J.Bottomley@HansenPartnership.com
  *
- * linux/arch/i386/kernel/voyager_cat.c
- *
  * This file contains all the logic for manipulating the CAT bus
  * in a level 5 machine.
  *
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 3cc8eb2f36a9..96f60c7cd124 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -4,8 +4,6 @@
  *
  * Author: J.E.J.Bottomley@HansenPartnership.com
  *
- * linux/arch/i386/kernel/voyager_smp.c
- *
  * This file provides all the same external entries as smp.c but uses
  * the voyager hal to provide the functionality
  */
@@ -27,6 +25,7 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/arch_hooks.h>
+#include <asm/trampoline.h>
 
 /* TLB state -- visible externally, indexed physically */
 DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 };
@@ -210,7 +209,7 @@ static int cpucount = 0;
 /* steal a page from the bottom of memory for the trampoline and
  * squirrel its address away here.  This will be in kernel virtual
  * space */
-static __u32 trampoline_base;
+unsigned char *trampoline_base;
 
 /* The per cpu profile stuff - used in smp_local_timer_interrupt */
 static DEFINE_PER_CPU(int, prof_multiplier) = 1;
@@ -429,15 +428,15 @@ void __init smp_store_cpu_info(int id)
 }
 
 /* set up the trampoline and return the physical address of the code */
-static __u32 __init setup_trampoline(void)
+unsigned long __init setup_trampoline(void)
 {
 	/* these two are global symbols in trampoline.S */
 	extern const __u8 trampoline_end[];
 	extern const __u8 trampoline_data[];
 
-	memcpy((__u8 *) trampoline_base, trampoline_data,
+	memcpy(trampoline_base, trampoline_data,
 	       trampoline_end - trampoline_data);
-	return virt_to_phys((__u8 *) trampoline_base);
+	return virt_to_phys(trampoline_base);
 }
 
 /* Routine initially called when a non-boot CPU is brought online */
@@ -520,13 +519,6 @@ static void __init do_boot_cpu(__u8 cpu)
 	    & ~(voyager_extended_vic_processors
 		& voyager_allowed_boot_processors);
 
-	/* This is an area in head.S which was used to set up the
-	 * initial kernel stack.  We need to alter this to give the
-	 * booting CPU a new stack (taken from its idle process) */
-	extern struct {
-		__u8 *sp;
-		unsigned short ss;
-	} stack_start;
 	/* This is the format of the CPI IDT gate (in real mode) which
 	 * we're hijacking to boot the CPU */
 	union IDTFormat {
@@ -1166,7 +1158,7 @@ void flush_tlb_all(void)
  * is sorted out */
 void __init smp_alloc_memory(void)
 {
-	trampoline_base = (__u32) alloc_bootmem_low_pages(PAGE_SIZE);
+	trampoline_base = alloc_bootmem_low_pages(PAGE_SIZE);
 	if (__pa(trampoline_base) >= 0x93000)
 		BUG();
 }
diff --git a/arch/x86/mach-voyager/voyager_thread.c b/arch/x86/mach-voyager/voyager_thread.c
index c69c931818ed..15464a20fb38 100644
--- a/arch/x86/mach-voyager/voyager_thread.c
+++ b/arch/x86/mach-voyager/voyager_thread.c
@@ -4,8 +4,6 @@
  *
  * Author: J.E.J.Bottomley@HansenPartnership.com
  *
- * linux/arch/i386/kernel/voyager_thread.c
- *
  * This module provides the machine status monitor thread for the
  * voyager architecture.  This allows us to monitor the machine
  * environment (temp, voltage, fan function) and the front panel and
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 760baeea5f07..6e38d877ea77 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -276,6 +276,7 @@ asmlinkage void math_emulate(long arg)
 	entry_sel_off.offset = FPU_ORIG_EIP;
 	entry_sel_off.selector = FPU_CS;
 	entry_sel_off.opcode = (byte1 << 8) | FPU_modrm;
+	entry_sel_off.empty = 0;
 
 	FPU_rm = FPU_modrm & 7;
 
@@ -677,7 +678,7 @@ int fpregs_soft_set(struct task_struct *target,
 		    unsigned int pos, unsigned int count,
 		    const void *kbuf, const void __user *ubuf)
 {
-	struct i387_soft_struct *s387 = &target->thread.i387.soft;
+	struct i387_soft_struct *s387 = &target->thread.xstate->soft;
 	void *space = s387->st_space;
 	int ret;
 	int offset, other, i, tags, regnr, tag, newtop;
@@ -729,7 +730,7 @@ int fpregs_soft_get(struct task_struct *target,
 		    unsigned int pos, unsigned int count,
 		    void *kbuf, void __user *ubuf)
 {
-	struct i387_soft_struct *s387 = &target->thread.i387.soft;
+	struct i387_soft_struct *s387 = &target->thread.xstate->soft;
 	const void *space = s387->st_space;
 	int ret;
 	int offset = (S387->ftop & 7) * 10, other = 80 - offset;
diff --git a/arch/x86/math-emu/fpu_system.h b/arch/x86/math-emu/fpu_system.h
index a3ae28c49ddd..13488fa153e0 100644
--- a/arch/x86/math-emu/fpu_system.h
+++ b/arch/x86/math-emu/fpu_system.h
@@ -35,8 +35,8 @@
 #define SEG_EXPAND_DOWN(s)	(((s).b & ((1 << 11) | (1 << 10))) \
 				 == (1 << 10))
 
-#define I387			(current->thread.i387)
-#define FPU_info		(I387.soft.info)
+#define I387			(current->thread.xstate)
+#define FPU_info		(I387->soft.info)
 
 #define FPU_CS			(*(unsigned short *) &(FPU_info->___cs))
 #define FPU_SS			(*(unsigned short *) &(FPU_info->___ss))
@@ -46,25 +46,25 @@
 #define FPU_EIP			(FPU_info->___eip)
 #define FPU_ORIG_EIP		(FPU_info->___orig_eip)
 
-#define FPU_lookahead           (I387.soft.lookahead)
+#define FPU_lookahead           (I387->soft.lookahead)
 
 /* nz if ip_offset and cs_selector are not to be set for the current
    instruction. */
-#define no_ip_update		(*(u_char *)&(I387.soft.no_update))
-#define FPU_rm			(*(u_char *)&(I387.soft.rm))
+#define no_ip_update		(*(u_char *)&(I387->soft.no_update))
+#define FPU_rm			(*(u_char *)&(I387->soft.rm))
 
 /* Number of bytes of data which can be legally accessed by the current
    instruction. This only needs to hold a number <= 108, so a byte will do. */
-#define access_limit		(*(u_char *)&(I387.soft.alimit))
+#define access_limit		(*(u_char *)&(I387->soft.alimit))
 
-#define partial_status		(I387.soft.swd)
-#define control_word		(I387.soft.cwd)
-#define fpu_tag_word		(I387.soft.twd)
-#define registers		(I387.soft.st_space)
-#define top			(I387.soft.ftop)
+#define partial_status		(I387->soft.swd)
+#define control_word		(I387->soft.cwd)
+#define fpu_tag_word		(I387->soft.twd)
+#define registers		(I387->soft.st_space)
+#define top			(I387->soft.ftop)
 
-#define instruction_address	(*(struct address *)&I387.soft.fip)
-#define operand_address		(*(struct address *)&I387.soft.foo)
+#define instruction_address	(*(struct address *)&I387->soft.fip)
+#define operand_address		(*(struct address *)&I387->soft.foo)
 
 #define FPU_access_ok(x,y,z)	if ( !access_ok(x,y,z) ) \
 				math_abort(FPU_info,SIGSEGV)
diff --git a/arch/x86/math-emu/reg_ld_str.c b/arch/x86/math-emu/reg_ld_str.c
index 799d4af5be66..d597fe7423c9 100644
--- a/arch/x86/math-emu/reg_ld_str.c
+++ b/arch/x86/math-emu/reg_ld_str.c
@@ -383,15 +383,15 @@ int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
 	int exp;
 	FPU_REG tmp;
 
+	l[0] = 0;
+	l[1] = 0;
 	if (st0_tag == TAG_Valid) {
 		reg_copy(st0_ptr, &tmp);
 		exp = exponent(&tmp);
 
 		if (exp < DOUBLE_Emin) {	/* It may be a denormal */
 			addexponent(&tmp, -DOUBLE_Emin + 52);	/* largest exp to be 51 */
-
-		      denormal_arg:
-
+denormal_arg:
 			if ((precision_loss = FPU_round_to_int(&tmp, st0_tag))) {
 #ifdef PECULIAR_486
 				/* Did it round to a non-denormal ? */
@@ -477,8 +477,7 @@ int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
 
 				/* This is a special case: see sec 16.2.5.1 of the 80486 book */
 				/* Overflow to infinity */
-				l[0] = 0x00000000;	/* Set to */
-				l[1] = 0x7ff00000;	/* + INF */
+				l[1] = 0x7ff00000;	/* Set to + INF */
 			} else {
 				if (precision_loss) {
 					if (increment)
@@ -492,8 +491,6 @@ int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
 		}
 	} else if (st0_tag == TAG_Zero) {
 		/* Number is zero */
-		l[0] = 0;
-		l[1] = 0;
 	} else if (st0_tag == TAG_Special) {
 		st0_tag = FPU_Special(st0_ptr);
 		if (st0_tag == TW_Denormal) {
@@ -508,7 +505,6 @@ int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
 			reg_copy(st0_ptr, &tmp);
 			goto denormal_arg;
 		} else if (st0_tag == TW_Infinity) {
-			l[0] = 0;
 			l[1] = 0x7ff00000;
 		} else if (st0_tag == TW_NaN) {
 			/* Is it really a NaN ? */
@@ -532,7 +528,6 @@ int FPU_store_double(FPU_REG *st0_ptr, u_char st0_tag, double __user *dfloat)
 				EXCEPTION(EX_Invalid);
 				if (!(control_word & CW_Invalid))
 					return 0;
-				l[0] = 0;
 				l[1] = 0xfff80000;
 			}
 		}
@@ -1185,8 +1180,8 @@ u_char __user *fstenv(fpu_addr_modes addr_modes, u_char __user *d)
 		control_word |= 0xffff0040;
 		partial_status = status_word() | 0xffff0000;
 		fpu_tag_word |= 0xffff0000;
-		I387.soft.fcs &= ~0xf8000000;
-		I387.soft.fos |= 0xffff0000;
+		I387->soft.fcs &= ~0xf8000000;
+		I387->soft.fos |= 0xffff0000;
 #endif /* PECULIAR_486 */
 		if (__copy_to_user(d, &control_word, 7 * 4))
 			FPU_abort;
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 983291096848..20941d2954e2 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,5 +1,17 @@
+obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
+	    pat.o
+
+obj-$(CONFIG_X86_32)		+= pgtable_32.o
+
+obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_X86_PTDUMP)	+= dump_pagetables.o
+
+obj-$(CONFIG_HIGHMEM)		+= highmem_32.o
+
 ifeq ($(CONFIG_X86_32),y)
-include ${srctree}/arch/x86/mm/Makefile_32
+obj-$(CONFIG_NUMA)		+= discontig_32.o
 else
-include ${srctree}/arch/x86/mm/Makefile_64
+obj-$(CONFIG_NUMA)		+= numa_64.o
+obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
+obj-$(CONFIG_ACPI_NUMA)		+= srat_64.o
 endif
diff --git a/arch/x86/mm/Makefile_32 b/arch/x86/mm/Makefile_32
deleted file mode 100644
index c36ae88bb543..000000000000
--- a/arch/x86/mm/Makefile_32
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux i386-specific parts of the memory manager.
-#
-
-obj-y	:= init_32.o pgtable_32.o fault.o ioremap.o extable.o pageattr.o mmap.o
-
-obj-$(CONFIG_NUMA) += discontig_32.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_HIGHMEM) += highmem_32.o
diff --git a/arch/x86/mm/Makefile_64 b/arch/x86/mm/Makefile_64
deleted file mode 100644
index 688c8c28ac8f..000000000000
--- a/arch/x86/mm/Makefile_64
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux x86_64-specific parts of the memory manager.
-#
-
-obj-y	 := init_64.o fault.o ioremap.o extable.o pageattr.o mmap.o
-obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_NUMA) += numa_64.o
-obj-$(CONFIG_K8_NUMA) += k8topology_64.o
-obj-$(CONFIG_ACPI_NUMA) += srat_64.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index c394ca0720b8..18378850e25a 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -37,7 +37,7 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 #include <asm/mmzone.h>
-#include <bios_ebda.h>
+#include <asm/bios_ebda.h>
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
@@ -120,7 +120,7 @@ int __init get_memcfg_numa_flat(void)
 	printk("NUMA - single node, flat memory mode\n");
 
 	/* Run the memory configuration and find the top of memory. */
-	find_max_pfn();
+	propagate_e820_map();
 	node_start_pfn[0] = 0;
 	node_end_pfn[0] = max_pfn;
 	memory_present(0, 0, max_pfn);
@@ -134,7 +134,7 @@ int __init get_memcfg_numa_flat(void)
 /*
  * Find the highest page frame number we have available for the node
  */
-static void __init find_max_pfn_node(int nid)
+static void __init propagate_e820_map_node(int nid)
 {
 	if (node_end_pfn[nid] > max_pfn)
 		node_end_pfn[nid] = max_pfn;
@@ -324,7 +324,6 @@ unsigned long __init setup_memory(void)
 	 * this space and use it to adjust the boundary between ZONE_NORMAL
 	 * and ZONE_HIGHMEM.
 	 */
-	find_max_pfn();
 	get_memcfg_numa();
 
 	kva_pages = calculate_numa_remap_pages();
@@ -380,7 +379,7 @@ unsigned long __init setup_memory(void)
 	printk("High memory starts at vaddr %08lx\n",
 			(ulong) pfn_to_kaddr(highstart_pfn));
 	for_each_online_node(nid)
-		find_max_pfn_node(nid);
+		propagate_e820_map_node(nid);
 
 	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
 	NODE_DATA(0)->bdata = &node0_bdata;
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
new file mode 100644
index 000000000000..6791b8334bc6
--- /dev/null
+++ b/arch/x86/mm/dump_pagetables.c
@@ -0,0 +1,354 @@
+/*
+ * Debug helper to dump the current kernel pagetables of the system
+ * so that we can see what the various memory ranges are set to.
+ *
+ * (C) Copyright 2008 Intel Corporation
+ *
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/seq_file.h>
+
+#include <asm/pgtable.h>
+
+/*
+ * The dumper groups pagetable entries of the same type into one, and for
+ * that it needs to keep some state when walking, and flush this state
+ * when a "break" in the continuity is found.
+ */
+struct pg_state {
+	int level;
+	pgprot_t current_prot;
+	unsigned long start_address;
+	unsigned long current_address;
+	const struct addr_marker *marker;
+};
+
+struct addr_marker {
+	unsigned long start_address;
+	const char *name;
+};
+
+/* Address space markers hints */
+static struct addr_marker address_markers[] = {
+	{ 0, "User Space" },
+#ifdef CONFIG_X86_64
+	{ 0x8000000000000000UL, "Kernel Space" },
+	{ 0xffff810000000000UL, "Low Kernel Mapping" },
+	{ VMALLOC_START,        "vmalloc() Area" },
+	{ VMEMMAP_START,        "Vmemmap" },
+	{ __START_KERNEL_map,   "High Kernel Mapping" },
+	{ MODULES_VADDR,        "Modules" },
+	{ MODULES_END,          "End Modules" },
+#else
+	{ PAGE_OFFSET,          "Kernel Mapping" },
+	{ 0/* VMALLOC_START */, "vmalloc() Area" },
+	{ 0/*VMALLOC_END*/,     "vmalloc() End" },
+# ifdef CONFIG_HIGHMEM
+	{ 0/*PKMAP_BASE*/,      "Persisent kmap() Area" },
+# endif
+	{ 0/*FIXADDR_START*/,   "Fixmap Area" },
+#endif
+	{ -1, NULL }		/* End of list */
+};
+
+/* Multipliers for offsets within the PTEs */
+#define PTE_LEVEL_MULT (PAGE_SIZE)
+#define PMD_LEVEL_MULT (PTRS_PER_PTE * PTE_LEVEL_MULT)
+#define PUD_LEVEL_MULT (PTRS_PER_PMD * PMD_LEVEL_MULT)
+#define PGD_LEVEL_MULT (PTRS_PER_PUD * PUD_LEVEL_MULT)
+
+/*
+ * Print a readable form of a pgprot_t to the seq_file
+ */
+static void printk_prot(struct seq_file *m, pgprot_t prot, int level)
+{
+	pgprotval_t pr = pgprot_val(prot);
+	static const char * const level_name[] =
+		{ "cr3", "pgd", "pud", "pmd", "pte" };
+
+	if (!pgprot_val(prot)) {
+		/* Not present */
+		seq_printf(m, "                          ");
+	} else {
+		if (pr & _PAGE_USER)
+			seq_printf(m, "USR ");
+		else
+			seq_printf(m, "    ");
+		if (pr & _PAGE_RW)
+			seq_printf(m, "RW ");
+		else
+			seq_printf(m, "ro ");
+		if (pr & _PAGE_PWT)
+			seq_printf(m, "PWT ");
+		else
+			seq_printf(m, "    ");
+		if (pr & _PAGE_PCD)
+			seq_printf(m, "PCD ");
+		else
+			seq_printf(m, "    ");
+
+		/* Bit 9 has a different meaning on level 3 vs 4 */
+		if (level <= 3) {
+			if (pr & _PAGE_PSE)
+				seq_printf(m, "PSE ");
+			else
+				seq_printf(m, "    ");
+		} else {
+			if (pr & _PAGE_PAT)
+				seq_printf(m, "pat ");
+			else
+				seq_printf(m, "    ");
+		}
+		if (pr & _PAGE_GLOBAL)
+			seq_printf(m, "GLB ");
+		else
+			seq_printf(m, "    ");
+		if (pr & _PAGE_NX)
+			seq_printf(m, "NX ");
+		else
+			seq_printf(m, "x  ");
+	}
+	seq_printf(m, "%s\n", level_name[level]);
+}
+
+/*
+ * On 64 bits, sign-extend the 48 bit address to 64 bit
+ */
+static unsigned long normalize_addr(unsigned long u)
+{
+#ifdef CONFIG_X86_64
+	return (signed long)(u << 16) >> 16;
+#else
+	return u;
+#endif
+}
+
+/*
+ * This function gets called on a break in a continuous series
+ * of PTE entries; the next one is different so we need to
+ * print what we collected so far.
+ */
+static void note_page(struct seq_file *m, struct pg_state *st,
+		      pgprot_t new_prot, int level)
+{
+	pgprotval_t prot, cur;
+	static const char units[] = "KMGTPE";
+
+	/*
+	 * If we have a "break" in the series, we need to flush the state that
+	 * we have now. "break" is either changing perms, levels or
+	 * address space marker.
+	 */
+	prot = pgprot_val(new_prot) & ~(PTE_MASK);
+	cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+
+	if (!st->level) {
+		/* First entry */
+		st->current_prot = new_prot;
+		st->level = level;
+		st->marker = address_markers;
+		seq_printf(m, "---[ %s ]---\n", st->marker->name);
+	} else if (prot != cur || level != st->level ||
+		   st->current_address >= st->marker[1].start_address) {
+		const char *unit = units;
+		unsigned long delta;
+
+		/*
+		 * Now print the actual finished series
+		 */
+		seq_printf(m, "0x%p-0x%p   ",
+			   (void *)st->start_address,
+			   (void *)st->current_address);
+
+		delta = (st->current_address - st->start_address) >> 10;
+		while (!(delta & 1023) && unit[1]) {
+			delta >>= 10;
+			unit++;
+		}
+		seq_printf(m, "%9lu%c ", delta, *unit);
+		printk_prot(m, st->current_prot, st->level);
+
+		/*
+		 * We print markers for special areas of address space,
+		 * such as the start of vmalloc space etc.
+		 * This helps in the interpretation.
+		 */
+		if (st->current_address >= st->marker[1].start_address) {
+			st->marker++;
+			seq_printf(m, "---[ %s ]---\n", st->marker->name);
+		}
+
+		st->start_address = st->current_address;
+		st->current_prot = new_prot;
+		st->level = level;
+	}
+}
+
+static void walk_pte_level(struct seq_file *m, struct pg_state *st, pmd_t addr,
+							unsigned long P)
+{
+	int i;
+	pte_t *start;
+
+	start = (pte_t *) pmd_page_vaddr(addr);
+	for (i = 0; i < PTRS_PER_PTE; i++) {
+		pgprot_t prot = pte_pgprot(*start);
+
+		st->current_address = normalize_addr(P + i * PTE_LEVEL_MULT);
+		note_page(m, st, prot, 4);
+		start++;
+	}
+}
+
+#if PTRS_PER_PMD > 1
+
+static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
+							unsigned long P)
+{
+	int i;
+	pmd_t *start;
+
+	start = (pmd_t *) pud_page_vaddr(addr);
+	for (i = 0; i < PTRS_PER_PMD; i++) {
+		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
+		if (!pmd_none(*start)) {
+			pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+
+			if (pmd_large(*start) || !pmd_present(*start))
+				note_page(m, st, __pgprot(prot), 3);
+			else
+				walk_pte_level(m, st, *start,
+					       P + i * PMD_LEVEL_MULT);
+		} else
+			note_page(m, st, __pgprot(0), 3);
+		start++;
+	}
+}
+
+#else
+#define walk_pmd_level(m,s,a,p) walk_pte_level(m,s,__pmd(pud_val(a)),p)
+#define pud_large(a) pmd_large(__pmd(pud_val(a)))
+#define pud_none(a)  pmd_none(__pmd(pud_val(a)))
+#endif
+
+#if PTRS_PER_PUD > 1
+
+static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
+							unsigned long P)
+{
+	int i;
+	pud_t *start;
+
+	start = (pud_t *) pgd_page_vaddr(addr);
+
+	for (i = 0; i < PTRS_PER_PUD; i++) {
+		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
+		if (!pud_none(*start)) {
+			pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+
+			if (pud_large(*start) || !pud_present(*start))
+				note_page(m, st, __pgprot(prot), 2);
+			else
+				walk_pmd_level(m, st, *start,
+					       P + i * PUD_LEVEL_MULT);
+		} else
+			note_page(m, st, __pgprot(0), 2);
+
+		start++;
+	}
+}
+
+#else
+#define walk_pud_level(m,s,a,p) walk_pmd_level(m,s,__pud(pgd_val(a)),p)
+#define pgd_large(a) pud_large(__pud(pgd_val(a)))
+#define pgd_none(a)  pud_none(__pud(pgd_val(a)))
+#endif
+
+static void walk_pgd_level(struct seq_file *m)
+{
+#ifdef CONFIG_X86_64
+	pgd_t *start = (pgd_t *) &init_level4_pgt;
+#else
+	pgd_t *start = swapper_pg_dir;
+#endif
+	int i;
+	struct pg_state st;
+
+	memset(&st, 0, sizeof(st));
+
+	for (i = 0; i < PTRS_PER_PGD; i++) {
+		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
+		if (!pgd_none(*start)) {
+			pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+
+			if (pgd_large(*start) || !pgd_present(*start))
+				note_page(m, &st, __pgprot(prot), 1);
+			else
+				walk_pud_level(m, &st, *start,
+					       i * PGD_LEVEL_MULT);
+		} else
+			note_page(m, &st, __pgprot(0), 1);
+
+		start++;
+	}
+
+	/* Flush out the last page */
+	st.current_address = normalize_addr(PTRS_PER_PGD*PGD_LEVEL_MULT);
+	note_page(m, &st, __pgprot(0), 0);
+}
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+	walk_pgd_level(m);
+	return 0;
+}
+
+static int ptdump_open(struct inode *inode, struct file *filp)
+{
+	return single_open(filp, ptdump_show, NULL);
+}
+
+static const struct file_operations ptdump_fops = {
+	.open		= ptdump_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+int pt_dump_init(void)
+{
+	struct dentry *pe;
+
+#ifdef CONFIG_X86_32
+	/* Not a compile-time constant on x86-32 */
+	address_markers[2].start_address = VMALLOC_START;
+	address_markers[3].start_address = VMALLOC_END;
+# ifdef CONFIG_HIGHMEM
+	address_markers[4].start_address = PKMAP_BASE;
+	address_markers[5].start_address = FIXADDR_START;
+# else
+	address_markers[4].start_address = FIXADDR_START;
+# endif
+#endif
+
+	pe = debugfs_create_file("kernel_page_tables", 0600, NULL, NULL,
+				 &ptdump_fops);
+	if (!pe)
+		return -ENOMEM;
+
+	return 0;
+}
+
+__initcall(pt_dump_init);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arjan van de Ven <arjan@linux.intel.com>");
+MODULE_DESCRIPTION("Kernel debugging helper that dumps pagetables");
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fdc667422df9..fd7e1798c75a 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -91,12 +91,10 @@ static int is_prefetch(struct pt_regs *regs, unsigned long addr,
 	int prefetch = 0;
 	unsigned char *max_instr;
 
-#ifdef CONFIG_X86_32
-	if (!(__supported_pte_mask & _PAGE_NX))
-		return 0;
-#endif
-
-	/* If it was a exec fault on NX page, ignore */
+	/*
+	 * If it was a exec (instruction fetch) fault on NX page, then
+	 * do not ignore the fault:
+	 */
 	if (error_code & PF_INSTR)
 		return 0;
 
@@ -641,7 +639,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code)
 #ifdef CONFIG_X86_32
 	/* It's safe to allow irq's after cr2 has been saved and the vmalloc
 	   fault has been handled. */
-	if (regs->flags & (X86_EFLAGS_IF|VM_MASK))
+	if (regs->flags & (X86_EFLAGS_IF | X86_VM_MASK))
 		local_irq_enable();
 
 	/*
@@ -978,9 +976,5 @@ void vmalloc_sync_all(void)
 		if (address == start)
 			start = address + PGDIR_SIZE;
 	}
-	/* Check that there is no need to do the same for the modules area. */
-	BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL));
-	BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) ==
-				(__START_KERNEL & PGDIR_MASK)));
 #endif
 }
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 3d936f232704..9cf33d3ee5bc 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -73,15 +73,15 @@ void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
 {
 	enum fixed_addresses idx;
 	unsigned long vaddr;
-	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
-
-	debug_kmap_atomic_prot(type);
 
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
 	pagefault_disable();
 
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic_prot(type);
+
 	idx = type + KM_TYPE_NR*smp_processor_id();
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	BUG_ON(!pte_none(*(kmap_pte-idx)));
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 4fbafb4bc2f0..0b3d567e686d 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -178,7 +178,7 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 
 	page = &pte_page(*pte)[vpfn % (HPAGE_SIZE/PAGE_SIZE)];
 
-	WARN_ON(!PageCompound(page));
+	WARN_ON(!PageHead(page));
 
 	return page;
 }
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index ee1091a46964..9ec62da85fd7 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -1,5 +1,4 @@
 /*
- *  linux/arch/i386/mm/init.c
  *
  *  Copyright (C) 1995  Linus Torvalds
  *
@@ -51,6 +50,8 @@
 
 unsigned int __VMALLOC_RESERVE = 128 << 20;
 
+unsigned long max_pfn_mapped;
+
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 unsigned long highstart_pfn, highend_pfn;
 
@@ -179,8 +180,13 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 			/*
 			 * Map with big pages if possible, otherwise
 			 * create normal page tables:
+			 *
+			 * Don't use a large page for the first 2/4MB of memory
+			 * because there are often fixed size MTRRs in there
+			 * and overlapping MTRRs into large pages can cause
+			 * slowdowns.
 			 */
-			if (cpu_has_pse) {
+			if (cpu_has_pse && !(pgd_idx == 0 && pmd_idx == 0)) {
 				unsigned int addr2;
 				pgprot_t prot = PAGE_KERNEL_LARGE;
 
@@ -194,6 +200,7 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 				set_pmd(pmd, pfn_pmd(pfn, prot));
 
 				pfn += PTRS_PER_PTE;
+				max_pfn_mapped = pfn;
 				continue;
 			}
 			pte = one_page_table_init(pmd);
@@ -208,6 +215,7 @@ static void __init kernel_physical_mapping_init(pgd_t *pgd_base)
 
 				set_pte(pte, pfn_pte(pfn, prot));
 			}
+			max_pfn_mapped = pfn;
 		}
 	}
 }
@@ -723,25 +731,17 @@ void mark_rodata_ro(void)
 	unsigned long start = PFN_ALIGN(_text);
 	unsigned long size = PFN_ALIGN(_etext) - start;
 
-#ifndef CONFIG_KPROBES
-#ifdef CONFIG_HOTPLUG_CPU
-	/* It must still be possible to apply SMP alternatives. */
-	if (num_possible_cpus() <= 1)
-#endif
-	{
-		set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
-		printk(KERN_INFO "Write protecting the kernel text: %luk\n",
-			size >> 10);
+	set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
+	printk(KERN_INFO "Write protecting the kernel text: %luk\n",
+		size >> 10);
 
 #ifdef CONFIG_CPA_DEBUG
-		printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
-			start, start+size);
-		set_pages_rw(virt_to_page(start), size>>PAGE_SHIFT);
+	printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
+		start, start+size);
+	set_pages_rw(virt_to_page(start), size>>PAGE_SHIFT);
 
-		printk(KERN_INFO "Testing CPA: write protecting again\n");
-		set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT);
-#endif
-	}
+	printk(KERN_INFO "Testing CPA: write protecting again\n");
+	set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT);
 #endif
 	start += size;
 	size = (unsigned long)__end_rodata - start;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index a02a14f0f324..1ff7906a9a4d 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -47,13 +47,30 @@
 #include <asm/numa.h>
 #include <asm/cacheflush.h>
 
-const struct dma_mapping_ops *dma_ops;
-EXPORT_SYMBOL(dma_ops);
-
 static unsigned long dma_reserve __initdata;
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
+int direct_gbpages __meminitdata
+#ifdef CONFIG_DIRECT_GBPAGES
+				= 1
+#endif
+;
+
+static int __init parse_direct_gbpages_off(char *arg)
+{
+	direct_gbpages = 0;
+	return 0;
+}
+early_param("nogbpages", parse_direct_gbpages_off);
+
+static int __init parse_direct_gbpages_on(char *arg)
+{
+	direct_gbpages = 1;
+	return 0;
+}
+early_param("gbpages", parse_direct_gbpages_on);
+
 /*
  * NOTE: pagetable_init alloc all the fixmap pagetables contiguous on the
  * physical space so we can cache the place of the first one and move
@@ -69,9 +86,6 @@ void show_mem(void)
 
 	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-		nr_swap_pages << (PAGE_SHIFT-10));
-
 	for_each_online_pgdat(pgdat) {
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
 			/*
@@ -296,7 +310,7 @@ __meminit void early_iounmap(void *addr, unsigned long size)
 	__flush_tlb_all();
 }
 
-static void __meminit
+static unsigned long __meminit
 phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
 {
 	int i = pmd_index(address);
@@ -318,21 +332,26 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end)
 		set_pte((pte_t *)pmd,
 			pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
 	}
+	return address;
 }
 
-static void __meminit
+static unsigned long __meminit
 phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
 {
 	pmd_t *pmd = pmd_offset(pud, 0);
+	unsigned long last_map_addr;
+
 	spin_lock(&init_mm.page_table_lock);
-	phys_pmd_init(pmd, address, end);
+	last_map_addr = phys_pmd_init(pmd, address, end);
 	spin_unlock(&init_mm.page_table_lock);
 	__flush_tlb_all();
+	return last_map_addr;
 }
 
-static void __meminit
+static unsigned long __meminit
 phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
 {
+	unsigned long last_map_addr = end;
 	int i = pud_index(addr);
 
 	for (; i < PTRS_PER_PUD; i++, addr = (addr & PUD_MASK) + PUD_SIZE) {
@@ -350,7 +369,15 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
 		}
 
 		if (pud_val(*pud)) {
-			phys_pmd_update(pud, addr, end);
+			if (!pud_large(*pud))
+				last_map_addr = phys_pmd_update(pud, addr, end);
+			continue;
+		}
+
+		if (direct_gbpages) {
+			set_pte((pte_t *)pud,
+				pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
 			continue;
 		}
 
@@ -358,12 +385,14 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end)
 
 		spin_lock(&init_mm.page_table_lock);
 		set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
-		phys_pmd_init(pmd, addr, end);
+		last_map_addr = phys_pmd_init(pmd, addr, end);
 		spin_unlock(&init_mm.page_table_lock);
 
 		unmap_low_page(pmd);
 	}
 	__flush_tlb_all();
+
+	return last_map_addr >> PAGE_SHIFT;
 }
 
 static void __init find_early_table_space(unsigned long end)
@@ -371,9 +400,11 @@ static void __init find_early_table_space(unsigned long end)
 	unsigned long puds, pmds, tables, start;
 
 	puds = (end + PUD_SIZE - 1) >> PUD_SHIFT;
-	pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
-	tables = round_up(puds * sizeof(pud_t), PAGE_SIZE) +
-		 round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+	tables = round_up(puds * sizeof(pud_t), PAGE_SIZE);
+	if (!direct_gbpages) {
+		pmds = (end + PMD_SIZE - 1) >> PMD_SHIFT;
+		tables += round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
+	}
 
 	/*
 	 * RED-PEN putting page tables only on node 0 could
@@ -393,16 +424,135 @@ static void __init find_early_table_space(unsigned long end)
 		(table_start << PAGE_SHIFT) + tables);
 }
 
+static void __init init_gbpages(void)
+{
+	if (direct_gbpages && cpu_has_gbpages)
+		printk(KERN_INFO "Using GB pages for direct mapping\n");
+	else
+		direct_gbpages = 0;
+}
+
+#ifdef CONFIG_MEMTEST_BOOTPARAM
+
+static void __init memtest(unsigned long start_phys, unsigned long size,
+				 unsigned pattern)
+{
+	unsigned long i;
+	unsigned long *start;
+	unsigned long start_bad;
+	unsigned long last_bad;
+	unsigned long val;
+	unsigned long start_phys_aligned;
+	unsigned long count;
+	unsigned long incr;
+
+	switch (pattern) {
+	case 0:
+		val = 0UL;
+		break;
+	case 1:
+		val = -1UL;
+		break;
+	case 2:
+		val = 0x5555555555555555UL;
+		break;
+	case 3:
+		val = 0xaaaaaaaaaaaaaaaaUL;
+		break;
+	default:
+		return;
+	}
+
+	incr = sizeof(unsigned long);
+	start_phys_aligned = ALIGN(start_phys, incr);
+	count = (size - (start_phys_aligned - start_phys))/incr;
+	start = __va(start_phys_aligned);
+	start_bad = 0;
+	last_bad = 0;
+
+	for (i = 0; i < count; i++)
+		start[i] = val;
+	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
+		if (*start != val) {
+			if (start_phys_aligned == last_bad + incr) {
+				last_bad += incr;
+			} else {
+				if (start_bad) {
+					printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
+						val, start_bad, last_bad + incr);
+					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+				}
+				start_bad = last_bad = start_phys_aligned;
+			}
+		}
+	}
+	if (start_bad) {
+		printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
+			val, start_bad, last_bad + incr);
+		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+	}
+
+}
+
+static int memtest_pattern __initdata = CONFIG_MEMTEST_BOOTPARAM_VALUE;
+
+static int __init parse_memtest(char *arg)
+{
+	if (arg)
+		memtest_pattern = simple_strtoul(arg, NULL, 0);
+	return 0;
+}
+
+early_param("memtest", parse_memtest);
+
+static void __init early_memtest(unsigned long start, unsigned long end)
+{
+	unsigned long t_start, t_size;
+	unsigned pattern;
+
+	if (!memtest_pattern)
+		return;
+
+	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+	for (pattern = 0; pattern < memtest_pattern; pattern++) {
+		t_start = start;
+		t_size = 0;
+		while (t_start < end) {
+			t_start = find_e820_area_size(t_start, &t_size, 1);
+
+			/* done ? */
+			if (t_start >= end)
+				break;
+			if (t_start + t_size > end)
+				t_size = end - t_start;
+
+			printk(KERN_CONT "\n  %016lx - %016lx pattern %d",
+				t_start, t_start + t_size, pattern);
+
+			memtest(t_start, t_size, pattern);
+
+			t_start += t_size;
+		}
+	}
+	printk(KERN_CONT "\n");
+}
+#else
+static void __init early_memtest(unsigned long start, unsigned long end)
+{
+}
+#endif
+
 /*
  * Setup the direct mapping of the physical memory at PAGE_OFFSET.
  * This runs before bootmem is initialized and gets pages directly from
  * the physical memory. To access them they are temporarily mapped.
  */
-void __init_refok init_memory_mapping(unsigned long start, unsigned long end)
+unsigned long __init_refok init_memory_mapping(unsigned long start, unsigned long end)
 {
-	unsigned long next;
+	unsigned long next, last_map_addr = end;
+	unsigned long start_phys = start, end_phys = end;
 
-	pr_debug("init_memory_mapping\n");
+	printk(KERN_INFO "init_memory_mapping\n");
 
 	/*
 	 * Find space for the kernel direct mapping tables.
@@ -411,8 +561,10 @@ void __init_refok init_memory_mapping(unsigned long start, unsigned long end)
 	 * memory mapped. Unfortunately this is done currently before the
 	 * nodes are discovered.
 	 */
-	if (!after_bootmem)
+	if (!after_bootmem) {
+		init_gbpages();
 		find_early_table_space(end);
+	}
 
 	start = (unsigned long)__va(start);
 	end = (unsigned long)__va(end);
@@ -430,7 +582,7 @@ void __init_refok init_memory_mapping(unsigned long start, unsigned long end)
 		next = start + PGDIR_SIZE;
 		if (next > end)
 			next = end;
-		phys_pud_init(pud, __pa(start), __pa(next));
+		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next));
 		if (!after_bootmem)
 			set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
 		unmap_low_page(pud);
@@ -443,6 +595,11 @@ void __init_refok init_memory_mapping(unsigned long start, unsigned long end)
 	if (!after_bootmem)
 		reserve_early(table_start << PAGE_SHIFT,
 				 table_end << PAGE_SHIFT, "PGTABLE");
+
+	if (!after_bootmem)
+		early_memtest(start_phys, end_phys);
+
+	return last_map_addr;
 }
 
 #ifndef CONFIG_NUMA
@@ -482,11 +639,13 @@ int arch_add_memory(int nid, u64 start, u64 size)
 {
 	struct pglist_data *pgdat = NODE_DATA(nid);
 	struct zone *zone = pgdat->node_zones + ZONE_NORMAL;
-	unsigned long start_pfn = start >> PAGE_SHIFT;
+	unsigned long last_mapped_pfn, start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 	int ret;
 
-	init_memory_mapping(start, start + size-1);
+	last_mapped_pfn = init_memory_mapping(start, start + size-1);
+	if (last_mapped_pfn > max_pfn_mapped)
+		max_pfn_mapped = last_mapped_pfn;
 
 	ret = __add_pages(zone, start_pfn, nr_pages);
 	WARN_ON(1);
@@ -596,24 +755,7 @@ EXPORT_SYMBOL_GPL(rodata_test_data);
 
 void mark_rodata_ro(void)
 {
-	unsigned long start = (unsigned long)_stext, end;
-
-#ifdef CONFIG_HOTPLUG_CPU
-	/* It must still be possible to apply SMP alternatives. */
-	if (num_possible_cpus() > 1)
-		start = (unsigned long)_etext;
-#endif
-
-#ifdef CONFIG_KPROBES
-	start = (unsigned long)__start_rodata;
-#endif
-
-	end = (unsigned long)__end_rodata;
-	start = (start + PAGE_SIZE - 1) & PAGE_MASK;
-	end &= PAGE_MASK;
-	if (end <= start)
-		return;
-
+	unsigned long start = PFN_ALIGN(_stext), end = PFN_ALIGN(__end_rodata);
 
 	printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
 	       (end - start) >> 10);
@@ -636,6 +778,7 @@ void mark_rodata_ro(void)
 	set_memory_ro(start, (end-start) >> PAGE_SHIFT);
 #endif
 }
+
 #endif
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -657,7 +800,7 @@ void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
 		 * This can happen with kdump kernels when accessing
 		 * firmware tables:
 		 */
-		if (pfn < end_pfn_map)
+		if (pfn < max_pfn_mapped)
 			return;
 
 		printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %u\n",
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index ac3c959e271d..3a4baf95e24d 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -19,11 +19,7 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/pgalloc.h>
-
-enum ioremap_mode {
-	IOR_MODE_UNCACHED,
-	IOR_MODE_CACHED,
-};
+#include <asm/pat.h>
 
 #ifdef CONFIG_X86_64
 
@@ -35,11 +31,23 @@ unsigned long __phys_addr(unsigned long x)
 }
 EXPORT_SYMBOL(__phys_addr);
 
+static inline int phys_addr_valid(unsigned long addr)
+{
+	return addr < (1UL << boot_cpu_data.x86_phys_bits);
+}
+
+#else
+
+static inline int phys_addr_valid(unsigned long addr)
+{
+	return 1;
+}
+
 #endif
 
 int page_is_ram(unsigned long pagenr)
 {
-	unsigned long addr, end;
+	resource_size_t addr, end;
 	int i;
 
 	/*
@@ -78,19 +86,22 @@ int page_is_ram(unsigned long pagenr)
  * Fix up the linear direct mapping of the kernel to avoid cache attribute
  * conflicts.
  */
-static int ioremap_change_attr(unsigned long vaddr, unsigned long size,
-			       enum ioremap_mode mode)
+int ioremap_change_attr(unsigned long vaddr, unsigned long size,
+			       unsigned long prot_val)
 {
 	unsigned long nrpages = size >> PAGE_SHIFT;
 	int err;
 
-	switch (mode) {
-	case IOR_MODE_UNCACHED:
+	switch (prot_val) {
+	case _PAGE_CACHE_UC:
 	default:
-		err = set_memory_uc(vaddr, nrpages);
+		err = _set_memory_uc(vaddr, nrpages);
 		break;
-	case IOR_MODE_CACHED:
-		err = set_memory_wb(vaddr, nrpages);
+	case _PAGE_CACHE_WC:
+		err = _set_memory_wc(vaddr, nrpages);
+		break;
+	case _PAGE_CACHE_WB:
+		err = _set_memory_wb(vaddr, nrpages);
 		break;
 	}
 
@@ -106,18 +117,28 @@ static int ioremap_change_attr(unsigned long vaddr, unsigned long size,
  * have to convert them into an offset in a page-aligned mapping, but the
  * caller shouldn't need to know that small detail.
  */
-static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
-			       enum ioremap_mode mode)
+static void __iomem *__ioremap(resource_size_t phys_addr, unsigned long size,
+			       unsigned long prot_val)
 {
-	unsigned long pfn, offset, last_addr, vaddr;
+	unsigned long pfn, offset, vaddr;
+	resource_size_t last_addr;
 	struct vm_struct *area;
+	unsigned long new_prot_val;
 	pgprot_t prot;
+	int retval;
 
 	/* Don't allow wraparound or zero size */
 	last_addr = phys_addr + size - 1;
 	if (!size || last_addr < phys_addr)
 		return NULL;
 
+	if (!phys_addr_valid(phys_addr)) {
+		printk(KERN_WARNING "ioremap: invalid physical address %llx\n",
+		       (unsigned long long)phys_addr);
+		WARN_ON_ONCE(1);
+		return NULL;
+	}
+
 	/*
 	 * Don't remap the low PCI/ISA area, it's always mapped..
 	 */
@@ -127,23 +148,14 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	/*
 	 * Don't allow anybody to remap normal RAM that we're using..
 	 */
-	for (pfn = phys_addr >> PAGE_SHIFT; pfn < max_pfn_mapped &&
-	     (pfn << PAGE_SHIFT) < last_addr; pfn++) {
-		if (page_is_ram(pfn) && pfn_valid(pfn) &&
-		    !PageReserved(pfn_to_page(pfn)))
-			return NULL;
-	}
+	for (pfn = phys_addr >> PAGE_SHIFT;
+				(pfn << PAGE_SHIFT) < last_addr; pfn++) {
 
-	WARN_ON_ONCE(page_is_ram(pfn));
+		int is_ram = page_is_ram(pfn);
 
-	switch (mode) {
-	case IOR_MODE_UNCACHED:
-	default:
-		prot = PAGE_KERNEL_NOCACHE;
-		break;
-	case IOR_MODE_CACHED:
-		prot = PAGE_KERNEL;
-		break;
+		if (is_ram && pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn)))
+			return NULL;
+		WARN_ON_ONCE(is_ram);
 	}
 
 	/*
@@ -153,6 +165,50 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	phys_addr &= PAGE_MASK;
 	size = PAGE_ALIGN(last_addr+1) - phys_addr;
 
+	retval = reserve_memtype(phys_addr, phys_addr + size,
+						prot_val, &new_prot_val);
+	if (retval) {
+		pr_debug("Warning: reserve_memtype returned %d\n", retval);
+		return NULL;
+	}
+
+	if (prot_val != new_prot_val) {
+		/*
+		 * Do not fallback to certain memory types with certain
+		 * requested type:
+		 * - request is uncached, return cannot be write-back
+		 * - request is uncached, return cannot be write-combine
+		 * - request is write-combine, return cannot be write-back
+		 */
+		if ((prot_val == _PAGE_CACHE_UC &&
+		     (new_prot_val == _PAGE_CACHE_WB ||
+		      new_prot_val == _PAGE_CACHE_WC)) ||
+		    (prot_val == _PAGE_CACHE_WC &&
+		     new_prot_val == _PAGE_CACHE_WB)) {
+			pr_debug(
+		"ioremap error for 0x%llx-0x%llx, requested 0x%lx, got 0x%lx\n",
+				(unsigned long long)phys_addr,
+				(unsigned long long)(phys_addr + size),
+				prot_val, new_prot_val);
+			free_memtype(phys_addr, phys_addr + size);
+			return NULL;
+		}
+		prot_val = new_prot_val;
+	}
+
+	switch (prot_val) {
+	case _PAGE_CACHE_UC:
+	default:
+		prot = PAGE_KERNEL_NOCACHE;
+		break;
+	case _PAGE_CACHE_WC:
+		prot = PAGE_KERNEL_WC;
+		break;
+	case _PAGE_CACHE_WB:
+		prot = PAGE_KERNEL;
+		break;
+	}
+
 	/*
 	 * Ok, go for it..
 	 */
@@ -162,11 +218,13 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
 	area->phys_addr = phys_addr;
 	vaddr = (unsigned long) area->addr;
 	if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+		free_memtype(phys_addr, phys_addr + size);
 		free_vm_area(area);
 		return NULL;
 	}
 
-	if (ioremap_change_attr(vaddr, size, mode) < 0) {
+	if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+		free_memtype(phys_addr, phys_addr + size);
 		vunmap(area->addr);
 		return NULL;
 	}
@@ -195,15 +253,34 @@ static void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
  *
  * Must be freed with iounmap.
  */
-void __iomem *ioremap_nocache(unsigned long phys_addr, unsigned long size)
+void __iomem *ioremap_nocache(resource_size_t phys_addr, unsigned long size)
 {
-	return __ioremap(phys_addr, size, IOR_MODE_UNCACHED);
+	return __ioremap(phys_addr, size, _PAGE_CACHE_UC);
 }
 EXPORT_SYMBOL(ioremap_nocache);
 
-void __iomem *ioremap_cache(unsigned long phys_addr, unsigned long size)
+/**
+ * ioremap_wc	-	map memory into CPU space write combined
+ * @offset:	bus address of the memory
+ * @size:	size of the resource to map
+ *
+ * This version of ioremap ensures that the memory is marked write combining.
+ * Write combining allows faster writes to some hardware devices.
+ *
+ * Must be freed with iounmap.
+ */
+void __iomem *ioremap_wc(unsigned long phys_addr, unsigned long size)
+{
+	if (pat_wc_enabled)
+		return __ioremap(phys_addr, size, _PAGE_CACHE_WC);
+	else
+		return ioremap_nocache(phys_addr, size);
+}
+EXPORT_SYMBOL(ioremap_wc);
+
+void __iomem *ioremap_cache(resource_size_t phys_addr, unsigned long size)
 {
-	return __ioremap(phys_addr, size, IOR_MODE_CACHED);
+	return __ioremap(phys_addr, size, _PAGE_CACHE_WB);
 }
 EXPORT_SYMBOL(ioremap_cache);
 
@@ -250,6 +327,8 @@ void iounmap(volatile void __iomem *addr)
 		return;
 	}
 
+	free_memtype(p->phys_addr, p->phys_addr + get_vm_area_size(p));
+
 	/* Finally remove it */
 	o = remove_vm_area((void *)addr);
 	BUG_ON(p != o || o == NULL);
@@ -270,8 +349,8 @@ static int __init early_ioremap_debug_setup(char *str)
 early_param("early_ioremap_debug", early_ioremap_debug_setup);
 
 static __initdata int after_paging_init;
-static __initdata pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)]
-				__attribute__((aligned(PAGE_SIZE)));
+static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)]
+		__section(.bss.page_aligned);
 
 static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
 {
diff --git a/arch/x86/mm/k8topology_64.c b/arch/x86/mm/k8topology_64.c
index 7a2ebce87df5..86808e666f9c 100644
--- a/arch/x86/mm/k8topology_64.c
+++ b/arch/x86/mm/k8topology_64.c
@@ -164,7 +164,7 @@ int __init k8_scan_nodes(unsigned long start, unsigned long end)
 	if (!found)
 		return -1;
 
-	memnode_shift = compute_hash_shift(nodes, 8);
+	memnode_shift = compute_hash_shift(nodes, 8, NULL);
 	if (memnode_shift < 0) {
 		printk(KERN_ERR "No NUMA node hash function found. Contact maintainer\n");
 		return -1;
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index 59898fb0a4aa..9a6892200b27 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -31,13 +31,15 @@ bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 
 struct memnode memnode;
 
+#ifdef CONFIG_SMP
 int x86_cpu_to_node_map_init[NR_CPUS] = {
 	[0 ... NR_CPUS-1] = NUMA_NO_NODE
 };
 void *x86_cpu_to_node_map_early_ptr;
+EXPORT_SYMBOL(x86_cpu_to_node_map_early_ptr);
+#endif
 DEFINE_PER_CPU(int, x86_cpu_to_node_map) = NUMA_NO_NODE;
 EXPORT_PER_CPU_SYMBOL(x86_cpu_to_node_map);
-EXPORT_SYMBOL(x86_cpu_to_node_map_early_ptr);
 
 s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
 	[0 ... MAX_LOCAL_APIC-1] = NUMA_NO_NODE
@@ -58,7 +60,7 @@ unsigned long __initdata nodemap_size;
  * -1 if node overlap or lost ram (shift too big)
  */
 static int __init populate_memnodemap(const struct bootnode *nodes,
-				      int numnodes, int shift)
+				      int numnodes, int shift, int *nodeids)
 {
 	unsigned long addr, end;
 	int i, res = -1;
@@ -74,7 +76,12 @@ static int __init populate_memnodemap(const struct bootnode *nodes,
 		do {
 			if (memnodemap[addr >> shift] != NUMA_NO_NODE)
 				return -1;
-			memnodemap[addr >> shift] = i;
+
+			if (!nodeids)
+				memnodemap[addr >> shift] = i;
+			else
+				memnodemap[addr >> shift] = nodeids[i];
+
 			addr += (1UL << shift);
 		} while (addr < end);
 		res = 1;
@@ -137,7 +144,8 @@ static int __init extract_lsb_from_nodes(const struct bootnode *nodes,
 	return i;
 }
 
-int __init compute_hash_shift(struct bootnode *nodes, int numnodes)
+int __init compute_hash_shift(struct bootnode *nodes, int numnodes,
+			      int *nodeids)
 {
 	int shift;
 
@@ -147,7 +155,7 @@ int __init compute_hash_shift(struct bootnode *nodes, int numnodes)
 	printk(KERN_DEBUG "NUMA: Using %d for the hash shift.\n",
 		shift);
 
-	if (populate_memnodemap(nodes, numnodes, shift) != 1) {
+	if (populate_memnodemap(nodes, numnodes, shift, nodeids) != 1) {
 		printk(KERN_INFO "Your memory is not aligned you need to "
 		       "rebuild your kernel with a bigger NODEMAPSIZE "
 		       "shift=%d\n", shift);
@@ -221,8 +229,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 				 bootmap_pages<<PAGE_SHIFT, PAGE_SIZE);
 	if (bootmap == NULL)  {
 		if (nodedata_phys < start || nodedata_phys >= end)
-			free_bootmem((unsigned long)node_data[nodeid],
-				     pgdat_size);
+			free_bootmem(nodedata_phys, pgdat_size);
 		node_data[nodeid] = NULL;
 		return;
 	}
@@ -379,9 +386,10 @@ static int __init split_nodes_by_size(struct bootnode *nodes, u64 *addr,
  * Sets up the system RAM area from start_pfn to end_pfn according to the
  * numa=fake command-line option.
  */
+static struct bootnode nodes[MAX_NUMNODES] __initdata;
+
 static int __init numa_emulation(unsigned long start_pfn, unsigned long end_pfn)
 {
-	struct bootnode nodes[MAX_NUMNODES];
 	u64 size, addr = start_pfn << PAGE_SHIFT;
 	u64 max_addr = end_pfn << PAGE_SHIFT;
 	int num_nodes = 0, num = 0, coeff_flag, coeff = -1, i;
@@ -461,7 +469,7 @@ done:
 		}
 	}
 out:
-	memnode_shift = compute_hash_shift(nodes, num_nodes);
+	memnode_shift = compute_hash_shift(nodes, num_nodes, NULL);
 	if (memnode_shift < 0) {
 		memnode_shift = 0;
 		printk(KERN_ERR "No NUMA hash function found.  NUMA emulation "
@@ -549,8 +557,6 @@ void __cpuinit numa_set_node(int cpu, int node)
 {
 	int *cpu_to_node_map = x86_cpu_to_node_map_early_ptr;
 
-	cpu_pda(cpu)->nodenumber = node;
-
 	if(cpu_to_node_map)
 		cpu_to_node_map[cpu] = node;
 	else if(per_cpu_offset(cpu))
@@ -622,13 +628,17 @@ void __init init_cpu_to_node(void)
 	int i;
 
 	for (i = 0; i < NR_CPUS; i++) {
+		int node;
 		u16 apicid = x86_cpu_to_apicid_init[i];
 
 		if (apicid == BAD_APICID)
 			continue;
-		if (apicid_to_node[apicid] == NUMA_NO_NODE)
+		node = apicid_to_node[apicid];
+		if (node == NUMA_NO_NODE)
+			continue;
+		if (!node_online(node))
 			continue;
-		numa_set_node(i, apicid_to_node[apicid]);
+		numa_set_node(i, node);
 	}
 }
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7049294fb469..f7823a172868 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -9,6 +9,8 @@
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -17,6 +19,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/proto.h>
+#include <asm/pat.h>
 
 /*
  * The current flushing context - we pass it instead of 5 arguments:
@@ -26,9 +29,9 @@ struct cpa_data {
 	pgprot_t	mask_set;
 	pgprot_t	mask_clr;
 	int		numpages;
-	int		processed;
 	int		flushtlb;
 	unsigned long	pfn;
+	unsigned	force_split : 1;
 };
 
 #ifdef CONFIG_X86_64
@@ -260,6 +263,9 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	int i, do_split = 1;
 	unsigned int level;
 
+	if (cpa->force_split)
+		return 1;
+
 	spin_lock_irqsave(&pgd_lock, flags);
 	/*
 	 * Check for races, another CPU might have split this page
@@ -291,8 +297,8 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 */
 	nextpage_addr = (address + psize) & pmask;
 	numpages = (nextpage_addr - address) >> PAGE_SHIFT;
-	if (numpages < cpa->processed)
-		cpa->processed = numpages;
+	if (numpages < cpa->numpages)
+		cpa->numpages = numpages;
 
 	/*
 	 * We are safe now. Check whether the new pgprot is the same:
@@ -319,7 +325,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 */
 	addr = address + PAGE_SIZE;
 	pfn++;
-	for (i = 1; i < cpa->processed; i++, addr += PAGE_SIZE, pfn++) {
+	for (i = 1; i < cpa->numpages; i++, addr += PAGE_SIZE, pfn++) {
 		pgprot_t chk_prot = static_protections(new_prot, addr, pfn);
 
 		if (pgprot_val(chk_prot) != pgprot_val(new_prot))
@@ -343,7 +349,7 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
 	 * that we limited the number of possible pages already to
 	 * the number of pages in the large page.
 	 */
-	if (address == (nextpage_addr - psize) && cpa->processed == numpages) {
+	if (address == (nextpage_addr - psize) && cpa->numpages == numpages) {
 		/*
 		 * The address is aligned and the number of pages
 		 * covers the full page.
@@ -536,7 +542,7 @@ static int __change_page_attr(struct cpa_data *cpa, int primary)
 repeat:
 	kpte = lookup_address(address, &level);
 	if (!kpte)
-		return primary ? -EINVAL : 0;
+		return 0;
 
 	old_pte = *kpte;
 	if (!pte_val(old_pte)) {
@@ -573,7 +579,7 @@ repeat:
 			set_pte_atomic(kpte, new_pte);
 			cpa->flushtlb = 1;
 		}
-		cpa->processed = 1;
+		cpa->numpages = 1;
 		return 0;
 	}
 
@@ -584,7 +590,7 @@ repeat:
 	do_split = try_preserve_large_page(kpte, address, cpa);
 	/*
 	 * When the range fits into the existing large page,
-	 * return. cp->processed and cpa->tlbflush have been updated in
+	 * return. cp->numpages and cpa->tlbflush have been updated in
 	 * try_large_page:
 	 */
 	if (do_split <= 0)
@@ -663,7 +669,7 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 		 * Store the remaining nr of pages for the large page
 		 * preservation check.
 		 */
-		cpa->numpages = cpa->processed = numpages;
+		cpa->numpages = numpages;
 
 		ret = __change_page_attr(cpa, checkalias);
 		if (ret)
@@ -680,9 +686,9 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
 		 * CPA operation. Either a large page has been
 		 * preserved or a single page update happened.
 		 */
-		BUG_ON(cpa->processed > numpages);
-		numpages -= cpa->processed;
-		cpa->vaddr += cpa->processed * PAGE_SIZE;
+		BUG_ON(cpa->numpages > numpages);
+		numpages -= cpa->numpages;
+		cpa->vaddr += cpa->numpages * PAGE_SIZE;
 	}
 	return 0;
 }
@@ -694,7 +700,8 @@ static inline int cache_attr(pgprot_t attr)
 }
 
 static int change_page_attr_set_clr(unsigned long addr, int numpages,
-				    pgprot_t mask_set, pgprot_t mask_clr)
+				    pgprot_t mask_set, pgprot_t mask_clr,
+				    int force_split)
 {
 	struct cpa_data cpa;
 	int ret, cache, checkalias;
@@ -705,7 +712,7 @@ static int change_page_attr_set_clr(unsigned long addr, int numpages,
 	 */
 	mask_set = canon_pgprot(mask_set);
 	mask_clr = canon_pgprot(mask_clr);
-	if (!pgprot_val(mask_set) && !pgprot_val(mask_clr))
+	if (!pgprot_val(mask_set) && !pgprot_val(mask_clr) && !force_split)
 		return 0;
 
 	/* Ensure we are PAGE_SIZE aligned */
@@ -722,6 +729,7 @@ static int change_page_attr_set_clr(unsigned long addr, int numpages,
 	cpa.mask_set = mask_set;
 	cpa.mask_clr = mask_clr;
 	cpa.flushtlb = 0;
+	cpa.force_split = force_split;
 
 	/* No alias checking for _NX bit modifications */
 	checkalias = (pgprot_val(mask_set) | pgprot_val(mask_clr)) != _PAGE_NX;
@@ -760,26 +768,61 @@ out:
 static inline int change_page_attr_set(unsigned long addr, int numpages,
 				       pgprot_t mask)
 {
-	return change_page_attr_set_clr(addr, numpages, mask, __pgprot(0));
+	return change_page_attr_set_clr(addr, numpages, mask, __pgprot(0), 0);
 }
 
 static inline int change_page_attr_clear(unsigned long addr, int numpages,
 					 pgprot_t mask)
 {
-	return change_page_attr_set_clr(addr, numpages, __pgprot(0), mask);
+	return change_page_attr_set_clr(addr, numpages, __pgprot(0), mask, 0);
 }
 
-int set_memory_uc(unsigned long addr, int numpages)
+int _set_memory_uc(unsigned long addr, int numpages)
 {
 	return change_page_attr_set(addr, numpages,
-				    __pgprot(_PAGE_PCD | _PAGE_PWT));
+				    __pgprot(_PAGE_CACHE_UC));
+}
+
+int set_memory_uc(unsigned long addr, int numpages)
+{
+	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	                    _PAGE_CACHE_UC, NULL))
+		return -EINVAL;
+
+	return _set_memory_uc(addr, numpages);
 }
 EXPORT_SYMBOL(set_memory_uc);
 
-int set_memory_wb(unsigned long addr, int numpages)
+int _set_memory_wc(unsigned long addr, int numpages)
+{
+	return change_page_attr_set(addr, numpages,
+				    __pgprot(_PAGE_CACHE_WC));
+}
+
+int set_memory_wc(unsigned long addr, int numpages)
+{
+	if (!pat_wc_enabled)
+		return set_memory_uc(addr, numpages);
+
+	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+		_PAGE_CACHE_WC, NULL))
+		return -EINVAL;
+
+	return _set_memory_wc(addr, numpages);
+}
+EXPORT_SYMBOL(set_memory_wc);
+
+int _set_memory_wb(unsigned long addr, int numpages)
 {
 	return change_page_attr_clear(addr, numpages,
-				      __pgprot(_PAGE_PCD | _PAGE_PWT));
+				      __pgprot(_PAGE_CACHE_MASK));
+}
+
+int set_memory_wb(unsigned long addr, int numpages)
+{
+	free_memtype(addr, addr + numpages * PAGE_SIZE);
+
+	return _set_memory_wb(addr, numpages);
 }
 EXPORT_SYMBOL(set_memory_wb);
 
@@ -810,6 +853,12 @@ int set_memory_np(unsigned long addr, int numpages)
 	return change_page_attr_clear(addr, numpages, __pgprot(_PAGE_PRESENT));
 }
 
+int set_memory_4k(unsigned long addr, int numpages)
+{
+	return change_page_attr_set_clr(addr, numpages, __pgprot(0),
+					__pgprot(0), 1);
+}
+
 int set_pages_uc(struct page *page, int numpages)
 {
 	unsigned long addr = (unsigned long)page_address(page);
@@ -919,6 +968,45 @@ void kernel_map_pages(struct page *page, int numpages, int enable)
 	cpa_fill_pool(NULL);
 }
 
+#ifdef CONFIG_DEBUG_FS
+static int dpa_show(struct seq_file *m, void *v)
+{
+	seq_puts(m, "DEBUG_PAGEALLOC\n");
+	seq_printf(m, "pool_size     : %lu\n", pool_size);
+	seq_printf(m, "pool_pages    : %lu\n", pool_pages);
+	seq_printf(m, "pool_low      : %lu\n", pool_low);
+	seq_printf(m, "pool_used     : %lu\n", pool_used);
+	seq_printf(m, "pool_failed   : %lu\n", pool_failed);
+
+	return 0;
+}
+
+static int dpa_open(struct inode *inode, struct file *filp)
+{
+	return single_open(filp, dpa_show, NULL);
+}
+
+static const struct file_operations dpa_fops = {
+	.open		= dpa_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+int __init debug_pagealloc_proc_init(void)
+{
+	struct dentry *de;
+
+	de = debugfs_create_file("debug_pagealloc", 0600, NULL, NULL,
+				 &dpa_fops);
+	if (!de)
+		return -ENOMEM;
+
+	return 0;
+}
+__initcall(debug_pagealloc_proc_init);
+#endif
+
 #ifdef CONFIG_HIBERNATION
 
 bool kernel_page_present(struct page *page)
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
new file mode 100644
index 000000000000..72c0f6097402
--- /dev/null
+++ b/arch/x86/mm/pat.c
@@ -0,0 +1,421 @@
+/*
+ * Handle caching attributes in page tables (PAT)
+ *
+ * Authors: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+ *          Suresh B Siddha <suresh.b.siddha@intel.com>
+ *
+ * Loosely based on earlier PAT patchset from Eric Biederman and Andi Kleen.
+ */
+
+#include <linux/mm.h>
+#include <linux/kernel.h>
+#include <linux/gfp.h>
+#include <linux/fs.h>
+
+#include <asm/msr.h>
+#include <asm/tlbflush.h>
+#include <asm/processor.h>
+#include <asm/pgtable.h>
+#include <asm/pat.h>
+#include <asm/e820.h>
+#include <asm/cacheflush.h>
+#include <asm/fcntl.h>
+#include <asm/mtrr.h>
+
+int pat_wc_enabled = 1;
+
+static u64 __read_mostly boot_pat_state;
+
+static int nopat(char *str)
+{
+	pat_wc_enabled = 0;
+	printk(KERN_INFO "x86: PAT support disabled.\n");
+
+	return 0;
+}
+early_param("nopat", nopat);
+
+static int pat_known_cpu(void)
+{
+	if (!pat_wc_enabled)
+		return 0;
+
+	if (cpu_has_pat)
+		return 1;
+
+	pat_wc_enabled = 0;
+	printk(KERN_INFO "CPU and/or kernel does not support PAT.\n");
+	return 0;
+}
+
+enum {
+	PAT_UC = 0,		/* uncached */
+	PAT_WC = 1,		/* Write combining */
+	PAT_WT = 4,		/* Write Through */
+	PAT_WP = 5,		/* Write Protected */
+	PAT_WB = 6,		/* Write Back (default) */
+	PAT_UC_MINUS = 7,	/* UC, but can be overriden by MTRR */
+};
+
+#define PAT(x,y)	((u64)PAT_ ## y << ((x)*8))
+
+void pat_init(void)
+{
+	u64 pat;
+
+#ifndef CONFIG_X86_PAT
+	nopat(NULL);
+#endif
+
+	/* Boot CPU enables PAT based on CPU feature */
+	if (!smp_processor_id() && !pat_known_cpu())
+		return;
+
+	/* APs enable PAT iff boot CPU has enabled it before */
+	if (smp_processor_id() && !pat_wc_enabled)
+		return;
+
+	/* Set PWT to Write-Combining. All other bits stay the same */
+	/*
+	 * PTE encoding used in Linux:
+	 *      PAT
+	 *      |PCD
+	 *      ||PWT
+	 *      |||
+	 *      000 WB		_PAGE_CACHE_WB
+	 *      001 WC		_PAGE_CACHE_WC
+	 *      010 UC-		_PAGE_CACHE_UC_MINUS
+	 *      011 UC		_PAGE_CACHE_UC
+	 * PAT bit unused
+	 */
+	pat = PAT(0,WB) | PAT(1,WC) | PAT(2,UC_MINUS) | PAT(3,UC) |
+	      PAT(4,WB) | PAT(5,WC) | PAT(6,UC_MINUS) | PAT(7,UC);
+
+	/* Boot CPU check */
+	if (!smp_processor_id()) {
+		rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
+	}
+
+	wrmsrl(MSR_IA32_CR_PAT, pat);
+	printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
+	       smp_processor_id(), boot_pat_state, pat);
+}
+
+#undef PAT
+
+static char *cattr_name(unsigned long flags)
+{
+	switch (flags & _PAGE_CACHE_MASK) {
+		case _PAGE_CACHE_UC:		return "uncached";
+		case _PAGE_CACHE_UC_MINUS:	return "uncached-minus";
+		case _PAGE_CACHE_WB:		return "write-back";
+		case _PAGE_CACHE_WC:		return "write-combining";
+		default:			return "broken";
+	}
+}
+
+/*
+ * The global memtype list keeps track of memory type for specific
+ * physical memory areas. Conflicting memory types in different
+ * mappings can cause CPU cache corruption. To avoid this we keep track.
+ *
+ * The list is sorted based on starting address and can contain multiple
+ * entries for each address (this allows reference counting for overlapping
+ * areas). All the aliases have the same cache attributes of course.
+ * Zero attributes are represented as holes.
+ *
+ * Currently the data structure is a list because the number of mappings
+ * are expected to be relatively small. If this should be a problem
+ * it could be changed to a rbtree or similar.
+ *
+ * memtype_lock protects the whole list.
+ */
+
+struct memtype {
+	u64 start;
+	u64 end;
+	unsigned long type;
+	struct list_head nd;
+};
+
+static LIST_HEAD(memtype_list);
+static DEFINE_SPINLOCK(memtype_lock); 	/* protects memtype list */
+
+/*
+ * Does intersection of PAT memory type and MTRR memory type and returns
+ * the resulting memory type as PAT understands it.
+ * (Type in pat and mtrr will not have same value)
+ * The intersection is based on "Effective Memory Type" tables in IA-32
+ * SDM vol 3a
+ */
+static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot,
+				unsigned long *ret_prot)
+{
+	unsigned long pat_type;
+	u8 mtrr_type;
+
+	mtrr_type = mtrr_type_lookup(start, end);
+	if (mtrr_type == 0xFF) {		/* MTRR not enabled */
+		*ret_prot = prot;
+		return 0;
+	}
+	if (mtrr_type == 0xFE) {		/* MTRR match error */
+		*ret_prot = _PAGE_CACHE_UC;
+		return -1;
+	}
+	if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
+	    mtrr_type != MTRR_TYPE_WRBACK &&
+	    mtrr_type != MTRR_TYPE_WRCOMB) {	/* MTRR type unhandled */
+		*ret_prot = _PAGE_CACHE_UC;
+		return -1;
+	}
+
+	pat_type = prot & _PAGE_CACHE_MASK;
+	prot &= (~_PAGE_CACHE_MASK);
+
+	/* Currently doing intersection by hand. Optimize it later. */
+	if (pat_type == _PAGE_CACHE_WC) {
+		*ret_prot = prot | _PAGE_CACHE_WC;
+	} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
+		*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
+	} else if (pat_type == _PAGE_CACHE_UC ||
+	           mtrr_type == MTRR_TYPE_UNCACHABLE) {
+		*ret_prot = prot | _PAGE_CACHE_UC;
+	} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
+		*ret_prot = prot | _PAGE_CACHE_WC;
+	} else {
+		*ret_prot = prot | _PAGE_CACHE_WB;
+	}
+
+	return 0;
+}
+
+int reserve_memtype(u64 start, u64 end, unsigned long req_type,
+			unsigned long *ret_type)
+{
+	struct memtype *new_entry = NULL;
+	struct memtype *parse;
+	unsigned long actual_type;
+	int err = 0;
+
+	/* Only track when pat_wc_enabled */
+	if (!pat_wc_enabled) {
+		if (ret_type)
+			*ret_type = req_type;
+
+		return 0;
+	}
+
+	/* Low ISA region is always mapped WB in page table. No need to track */
+	if (start >= ISA_START_ADDRESS && (end - 1) <= ISA_END_ADDRESS) {
+		if (ret_type)
+			*ret_type = _PAGE_CACHE_WB;
+
+		return 0;
+	}
+
+	req_type &= _PAGE_CACHE_MASK;
+	err = pat_x_mtrr_type(start, end, req_type, &actual_type);
+	if (err) {
+		if (ret_type)
+			*ret_type = actual_type;
+
+		return -EINVAL;
+	}
+
+	new_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	if (!new_entry)
+		return -ENOMEM;
+
+	new_entry->start = start;
+	new_entry->end = end;
+	new_entry->type = actual_type;
+
+	if (ret_type)
+		*ret_type = actual_type;
+
+	spin_lock(&memtype_lock);
+
+	/* Search for existing mapping that overlaps the current range */
+	list_for_each_entry(parse, &memtype_list, nd) {
+		struct memtype *saved_ptr;
+
+		if (parse->start >= end) {
+			printk("New Entry\n");
+			list_add(&new_entry->nd, parse->nd.prev);
+			new_entry = NULL;
+			break;
+		}
+
+		if (start <= parse->start && end >= parse->start) {
+			if (actual_type != parse->type && ret_type) {
+				actual_type = parse->type;
+				*ret_type = actual_type;
+				new_entry->type = actual_type;
+			}
+
+			if (actual_type != parse->type) {
+				printk(
+		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+					current->comm, current->pid,
+					start, end,
+					cattr_name(actual_type),
+					cattr_name(parse->type));
+				err = -EBUSY;
+				break;
+			}
+
+			saved_ptr = parse;
+			/*
+			 * Check to see whether the request overlaps more
+			 * than one entry in the list
+			 */
+			list_for_each_entry_continue(parse, &memtype_list, nd) {
+				if (end <= parse->start) {
+					break;
+				}
+
+				if (actual_type != parse->type) {
+					printk(
+		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+						current->comm, current->pid,
+						start, end,
+						cattr_name(actual_type),
+						cattr_name(parse->type));
+					err = -EBUSY;
+					break;
+				}
+			}
+
+			if (err) {
+				break;
+			}
+
+			printk("Overlap at 0x%Lx-0x%Lx\n",
+			       saved_ptr->start, saved_ptr->end);
+			/* No conflict. Go ahead and add this new entry */
+			list_add(&new_entry->nd, saved_ptr->nd.prev);
+			new_entry = NULL;
+			break;
+		}
+
+		if (start < parse->end) {
+			if (actual_type != parse->type && ret_type) {
+				actual_type = parse->type;
+				*ret_type = actual_type;
+				new_entry->type = actual_type;
+			}
+
+			if (actual_type != parse->type) {
+				printk(
+		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+					current->comm, current->pid,
+					start, end,
+					cattr_name(actual_type),
+					cattr_name(parse->type));
+				err = -EBUSY;
+				break;
+			}
+
+			saved_ptr = parse;
+			/*
+			 * Check to see whether the request overlaps more
+			 * than one entry in the list
+			 */
+			list_for_each_entry_continue(parse, &memtype_list, nd) {
+				if (end <= parse->start) {
+					break;
+				}
+
+				if (actual_type != parse->type) {
+					printk(
+		KERN_INFO "%s:%d conflicting memory types %Lx-%Lx %s<->%s\n",
+						current->comm, current->pid,
+						start, end,
+						cattr_name(actual_type),
+						cattr_name(parse->type));
+					err = -EBUSY;
+					break;
+				}
+			}
+
+			if (err) {
+				break;
+			}
+
+			printk("Overlap at 0x%Lx-0x%Lx\n",
+			       saved_ptr->start, saved_ptr->end);
+			/* No conflict. Go ahead and add this new entry */
+			list_add(&new_entry->nd, &saved_ptr->nd);
+			new_entry = NULL;
+			break;
+		}
+	}
+
+	if (err) {
+		printk(
+	"reserve_memtype failed 0x%Lx-0x%Lx, track %s, req %s\n",
+			start, end, cattr_name(new_entry->type),
+			cattr_name(req_type));
+		kfree(new_entry);
+		spin_unlock(&memtype_lock);
+		return err;
+	}
+
+	if (new_entry) {
+		/* No conflict. Not yet added to the list. Add to the tail */
+		list_add_tail(&new_entry->nd, &memtype_list);
+		printk("New Entry\n");
+  	}
+
+	if (ret_type) {
+		printk(
+	"reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s, ret %s\n",
+			start, end, cattr_name(actual_type),
+			cattr_name(req_type), cattr_name(*ret_type));
+	} else {
+		printk(
+	"reserve_memtype added 0x%Lx-0x%Lx, track %s, req %s\n",
+			start, end, cattr_name(actual_type),
+			cattr_name(req_type));
+	}
+
+	spin_unlock(&memtype_lock);
+	return err;
+}
+
+int free_memtype(u64 start, u64 end)
+{
+	struct memtype *ml;
+	int err = -EINVAL;
+
+	/* Only track when pat_wc_enabled */
+	if (!pat_wc_enabled) {
+		return 0;
+	}
+
+	/* Low ISA region is always mapped WB. No need to track */
+	if (start >= ISA_START_ADDRESS && end <= ISA_END_ADDRESS) {
+		return 0;
+	}
+
+	spin_lock(&memtype_lock);
+	list_for_each_entry(ml, &memtype_list, nd) {
+		if (ml->start == start && ml->end == end) {
+			list_del(&ml->nd);
+			kfree(ml);
+			err = 0;
+			break;
+		}
+	}
+	spin_unlock(&memtype_lock);
+
+	if (err) {
+		printk(KERN_DEBUG "%s:%d freeing invalid memtype %Lx-%Lx\n",
+			current->comm, current->pid, start, end);
+	}
+
+	printk( "free_memtype request 0x%Lx-0x%Lx\n", start, end);
+	return err;
+}
+
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index 73aba7125203..6fb9e7c6893f 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -1,7 +1,3 @@
-/*
- *  linux/arch/i386/mm/pgtable.c
- */
-
 #include <linux/sched.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
@@ -36,7 +32,6 @@ void show_mem(void)
 
 	printk(KERN_INFO "Mem-info:\n");
 	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
 	for_each_online_pgdat(pgdat) {
 		pgdat_resize_lock(pgdat, &flags);
 		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
@@ -342,12 +337,16 @@ static void pgd_mop_up_pmds(struct mm_struct *mm, pgd_t *pgdp)
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	pgd_t *pgd = quicklist_alloc(0, GFP_KERNEL, pgd_ctor);
+	pgd_t *pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
 
-	mm->pgd = pgd;		/* so that alloc_pd can use it */
+	/* so that alloc_pd can use it */
+	mm->pgd = pgd;
+	if (pgd)
+		pgd_ctor(pgd);
 
 	if (pgd && !pgd_prepopulate_pmd(mm, pgd)) {
-		quicklist_free(0, pgd_dtor, pgd);
+		pgd_dtor(pgd);
+		free_page((unsigned long)pgd);
 		pgd = NULL;
 	}
 
@@ -357,12 +356,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 	pgd_mop_up_pmds(mm, pgd);
-	quicklist_free(0, pgd_dtor, pgd);
-}
-
-void check_pgt_cache(void)
-{
-	quicklist_trim(0, pgd_dtor, 25, 16);
+	pgd_dtor(pgd);
+	free_page((unsigned long)pgd);
 }
 
 void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
@@ -381,3 +376,10 @@ void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 }
 
 #endif
+
+int pmd_bad(pmd_t pmd)
+{
+	WARN_ON_ONCE(pmd_bad_v1(pmd) != pmd_bad_v2(pmd));
+
+	return pmd_bad_v1(pmd);
+}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 845001c617cc..fb43d89f46f3 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -20,6 +20,7 @@
 #include <asm/proto.h>
 #include <asm/numa.h>
 #include <asm/e820.h>
+#include <asm/genapic.h>
 
 int acpi_numa __initdata;
 
@@ -31,6 +32,10 @@ static struct bootnode nodes_add[MAX_NUMNODES];
 static int found_add_area __initdata;
 int hotadd_percent __initdata = 0;
 
+static int num_node_memblks __initdata;
+static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata;
+static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata;
+
 /* Too small nodes confuse the VM badly. Usually they result
    from BIOS bugs. */
 #define NODE_MIN_SIZE (4*1024*1024)
@@ -40,17 +45,17 @@ static __init int setup_node(int pxm)
 	return acpi_map_pxm_to_node(pxm);
 }
 
-static __init int conflicting_nodes(unsigned long start, unsigned long end)
+static __init int conflicting_memblks(unsigned long start, unsigned long end)
 {
 	int i;
-	for_each_node_mask(i, nodes_parsed) {
-		struct bootnode *nd = &nodes[i];
+	for (i = 0; i < num_node_memblks; i++) {
+		struct bootnode *nd = &node_memblk_range[i];
 		if (nd->start == nd->end)
 			continue;
 		if (nd->end > start && nd->start < end)
-			return i;
+			return memblk_nodeid[i];
 		if (nd->end == end && nd->start == start)
-			return i;
+			return memblk_nodeid[i];
 	}
 	return -1;
 }
@@ -132,7 +137,6 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 	int pxm, node;
 	int apic_id;
 
-	apic_id = pa->apic_id;
 	if (srat_disabled())
 		return;
 	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
@@ -148,6 +152,11 @@ acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
 		bad_srat();
 		return;
 	}
+
+	if (is_uv_system())
+		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
+	else
+		apic_id = pa->apic_id;
 	apicid_to_node[apic_id] = node;
 	acpi_numa = 1;
 	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
@@ -253,7 +262,7 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 		bad_srat();
 		return;
 	}
-	i = conflicting_nodes(start, end);
+	i = conflicting_memblks(start, end);
 	if (i == node) {
 		printk(KERN_WARNING
 		"SRAT: Warning: PXM %d (%lx-%lx) overlaps with itself (%Lx-%Lx)\n",
@@ -278,10 +287,10 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 			nd->end = end;
 	}
 
-	printk(KERN_INFO "SRAT: Node %u PXM %u %Lx-%Lx\n", node, pxm,
-	       nd->start, nd->end);
-	e820_register_active_regions(node, nd->start >> PAGE_SHIFT,
-						nd->end >> PAGE_SHIFT);
+	printk(KERN_INFO "SRAT: Node %u PXM %u %lx-%lx\n", node, pxm,
+	       start, end);
+	e820_register_active_regions(node, start >> PAGE_SHIFT,
+				     end >> PAGE_SHIFT);
 	push_node_boundaries(node, nd->start >> PAGE_SHIFT,
 						nd->end >> PAGE_SHIFT);
 
@@ -293,6 +302,11 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
 		if ((nd->start | nd->end) == 0)
 			node_clear(node, nodes_parsed);
 	}
+
+	node_memblk_range[num_node_memblks].start = start;
+	node_memblk_range[num_node_memblks].end = end;
+	memblk_nodeid[num_node_memblks] = node;
+	num_node_memblks++;
 }
 
 /* Sanity check to catch more bad SRATs (they are amazingly common).
@@ -363,7 +377,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end)
 		return -1;
 	}
 
-	memnode_shift = compute_hash_shift(nodes, MAX_NUMNODES);
+	memnode_shift = compute_hash_shift(node_memblk_range, num_node_memblks,
+					   memblk_nodeid);
 	if (memnode_shift < 0) {
 		printk(KERN_ERR
 		     "SRAT: No NUMA node hash function found. Contact maintainer\n");
diff --git a/arch/x86/oprofile/init.c b/arch/x86/oprofile/init.c
index 5341d481d92f..cdfe4c54deca 100644
--- a/arch/x86/oprofile/init.c
+++ b/arch/x86/oprofile/init.c
@@ -10,18 +10,19 @@
 #include <linux/oprofile.h>
 #include <linux/init.h>
 #include <linux/errno.h>
- 
-/* We support CPUs that have performance counters like the Pentium Pro
+
+/*
+ * We support CPUs that have performance counters like the Pentium Pro
  * with the NMI mode driver.
  */
- 
-extern int op_nmi_init(struct oprofile_operations * ops);
-extern int op_nmi_timer_init(struct oprofile_operations * ops);
+
+extern int op_nmi_init(struct oprofile_operations *ops);
+extern int op_nmi_timer_init(struct oprofile_operations *ops);
 extern void op_nmi_exit(void);
 extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
 
 
-int __init oprofile_arch_init(struct oprofile_operations * ops)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
 	int ret;
 
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 1f11cf0a307f..cc48d3fde545 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -23,8 +23,8 @@
 #include "op_x86_model.h"
 
 static struct op_x86_model_spec const *model;
-static struct op_msrs cpu_msrs[NR_CPUS];
-static unsigned long saved_lvtpc[NR_CPUS];
+static DEFINE_PER_CPU(struct op_msrs, cpu_msrs);
+static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
 static int nmi_start(void);
 static void nmi_stop(void);
@@ -89,7 +89,7 @@ static int profile_exceptions_notify(struct notifier_block *self,
 
 	switch (val) {
 	case DIE_NMI:
-		if (model->check_ctrs(args->regs, &cpu_msrs[cpu]))
+		if (model->check_ctrs(args->regs, &per_cpu(cpu_msrs, cpu)))
 			ret = NOTIFY_STOP;
 		break;
 	default:
@@ -126,7 +126,7 @@ static void nmi_cpu_save_registers(struct op_msrs *msrs)
 static void nmi_save_registers(void *dummy)
 {
 	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &cpu_msrs[cpu];
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
 	nmi_cpu_save_registers(msrs);
 }
 
@@ -134,10 +134,10 @@ static void free_msrs(void)
 {
 	int i;
 	for_each_possible_cpu(i) {
-		kfree(cpu_msrs[i].counters);
-		cpu_msrs[i].counters = NULL;
-		kfree(cpu_msrs[i].controls);
-		cpu_msrs[i].controls = NULL;
+		kfree(per_cpu(cpu_msrs, i).counters);
+		per_cpu(cpu_msrs, i).counters = NULL;
+		kfree(per_cpu(cpu_msrs, i).controls);
+		per_cpu(cpu_msrs, i).controls = NULL;
 	}
 }
 
@@ -149,13 +149,15 @@ static int allocate_msrs(void)
 
 	int i;
 	for_each_possible_cpu(i) {
-		cpu_msrs[i].counters = kmalloc(counters_size, GFP_KERNEL);
-		if (!cpu_msrs[i].counters) {
+		per_cpu(cpu_msrs, i).counters = kmalloc(counters_size,
+								GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).counters) {
 			success = 0;
 			break;
 		}
-		cpu_msrs[i].controls = kmalloc(controls_size, GFP_KERNEL);
-		if (!cpu_msrs[i].controls) {
+		per_cpu(cpu_msrs, i).controls = kmalloc(controls_size,
+								GFP_KERNEL);
+		if (!per_cpu(cpu_msrs, i).controls) {
 			success = 0;
 			break;
 		}
@@ -170,11 +172,11 @@ static int allocate_msrs(void)
 static void nmi_cpu_setup(void *dummy)
 {
 	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &cpu_msrs[cpu];
+	struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu);
 	spin_lock(&oprofilefs_lock);
 	model->setup_ctrs(msrs);
 	spin_unlock(&oprofilefs_lock);
-	saved_lvtpc[cpu] = apic_read(APIC_LVTPC);
+	per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC);
 	apic_write(APIC_LVTPC, APIC_DM_NMI);
 }
 
@@ -203,13 +205,15 @@ static int nmi_setup(void)
 	 */
 
 	/* Assume saved/restored counters are the same on all CPUs */
-	model->fill_in_addresses(&cpu_msrs[0]);
+	model->fill_in_addresses(&per_cpu(cpu_msrs, 0));
 	for_each_possible_cpu(cpu) {
 		if (cpu != 0) {
-			memcpy(cpu_msrs[cpu].counters, cpu_msrs[0].counters,
+			memcpy(per_cpu(cpu_msrs, cpu).counters,
+				per_cpu(cpu_msrs, 0).counters,
 				sizeof(struct op_msr) * model->num_counters);
 
-			memcpy(cpu_msrs[cpu].controls, cpu_msrs[0].controls,
+			memcpy(per_cpu(cpu_msrs, cpu).controls,
+				per_cpu(cpu_msrs, 0).controls,
 				sizeof(struct op_msr) * model->num_controls);
 		}
 
@@ -249,7 +253,7 @@ static void nmi_cpu_shutdown(void *dummy)
 {
 	unsigned int v;
 	int cpu = smp_processor_id();
-	struct op_msrs *msrs = &cpu_msrs[cpu];
+	struct op_msrs *msrs = &__get_cpu_var(cpu_msrs);
 
 	/* restoring APIC_LVTPC can trigger an apic error because the delivery
 	 * mode and vector nr combination can be illegal. That's by design: on
@@ -258,23 +262,24 @@ static void nmi_cpu_shutdown(void *dummy)
 	 */
 	v = apic_read(APIC_LVTERR);
 	apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
-	apic_write(APIC_LVTPC, saved_lvtpc[cpu]);
+	apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu));
 	apic_write(APIC_LVTERR, v);
 	nmi_restore_registers(msrs);
 }
 
 static void nmi_shutdown(void)
 {
+	struct op_msrs *msrs = &__get_cpu_var(cpu_msrs);
 	nmi_enabled = 0;
 	on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
-	model->shutdown(cpu_msrs);
+	model->shutdown(msrs);
 	free_msrs();
 }
 
 static void nmi_cpu_start(void *dummy)
 {
-	struct op_msrs const *msrs = &cpu_msrs[smp_processor_id()];
+	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
 	model->start(msrs);
 }
 
@@ -286,7 +291,7 @@ static int nmi_start(void)
 
 static void nmi_cpu_stop(void *dummy)
 {
-	struct op_msrs const *msrs = &cpu_msrs[smp_processor_id()];
+	struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs);
 	model->stop(msrs);
 }
 
diff --git a/arch/x86/oprofile/nmi_timer_int.c b/arch/x86/oprofile/nmi_timer_int.c
index 1418e36ae7ab..e3ecb71b5790 100644
--- a/arch/x86/oprofile/nmi_timer_int.c
+++ b/arch/x86/oprofile/nmi_timer_int.c
@@ -17,14 +17,14 @@
 #include <asm/nmi.h>
 #include <asm/apic.h>
 #include <asm/ptrace.h>
- 
+
 static int profile_timer_exceptions_notify(struct notifier_block *self,
 					   unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
 	int ret = NOTIFY_DONE;
 
-	switch(val) {
+	switch (val) {
 	case DIE_NMI:
 		oprofile_add_sample(args->regs, 0);
 		ret = NOTIFY_STOP;
@@ -56,7 +56,7 @@ static void timer_stop(void)
 }
 
 
-int __init op_nmi_timer_init(struct oprofile_operations * ops)
+int __init op_nmi_timer_init(struct oprofile_operations *ops)
 {
 	if ((nmi_watchdog != NMI_IO_APIC) || (atomic_read(&nmi_active) <= 0))
 		return -ENODEV;
diff --git a/arch/x86/oprofile/op_model_athlon.c b/arch/x86/oprofile/op_model_athlon.c
index c3ee43333f26..3d534879a9dc 100644
--- a/arch/x86/oprofile/op_model_athlon.c
+++ b/arch/x86/oprofile/op_model_athlon.c
@@ -1,4 +1,4 @@
-/**
+/*
  * @file op_model_athlon.h
  * athlon / K7 / K8 / Family 10h model-specific MSR operations
  *
@@ -14,28 +14,28 @@
 #include <asm/ptrace.h>
 #include <asm/msr.h>
 #include <asm/nmi.h>
- 
+
 #include "op_x86_model.h"
 #include "op_counter.h"
 
 #define NUM_COUNTERS 4
 #define NUM_CONTROLS 4
 
-#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
-#define CTR_WRITE(l,msrs,c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1);} while (0)
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
+#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l,h,msrs,c) do {rdmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
-#define CTRL_WRITE(l,h,msrs,c) do {wrmsr(msrs->controls[(c)].addr, (l), (h));} while (0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
+#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
 #define CTRL_SET_ACTIVE(n) (n |= (1<<22))
 #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR_LO(x) (x &= (1<<21))
 #define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
 #define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
 #define CTRL_SET_EVENT_HIGH(val, e) (val |= ((e >> 8) & 0xf))
@@ -43,19 +43,19 @@
 #define CTRL_SET_GUEST_ONLY(val, h) (val |= ((h & 1) << 8))
 
 static unsigned long reset_value[NUM_COUNTERS];
- 
+
 static void athlon_fill_in_addresses(struct op_msrs * const msrs)
 {
 	int i;
 
-	for (i=0; i < NUM_COUNTERS; i++) {
+	for (i = 0; i < NUM_COUNTERS; i++) {
 		if (reserve_perfctr_nmi(MSR_K7_PERFCTR0 + i))
 			msrs->counters[i].addr = MSR_K7_PERFCTR0 + i;
 		else
 			msrs->counters[i].addr = 0;
 	}
 
-	for (i=0; i < NUM_CONTROLS; i++) {
+	for (i = 0; i < NUM_CONTROLS; i++) {
 		if (reserve_evntsel_nmi(MSR_K7_EVNTSEL0 + i))
 			msrs->controls[i].addr = MSR_K7_EVNTSEL0 + i;
 		else
@@ -63,15 +63,15 @@ static void athlon_fill_in_addresses(struct op_msrs * const msrs)
 	}
 }
 
- 
+
 static void athlon_setup_ctrs(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;
- 
+
 	/* clear all counters */
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
 		CTRL_CLEAR_LO(low);
@@ -81,14 +81,14 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs)
 
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs,i)))
+		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
 		CTR_WRITE(1, msrs, i);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) {
+		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 
 			CTR_WRITE(counter_config[i].count, msrs, i);
@@ -112,7 +112,7 @@ static void athlon_setup_ctrs(struct op_msrs const * const msrs)
 	}
 }
 
- 
+
 static int athlon_check_ctrs(struct pt_regs * const regs,
 			     struct op_msrs const * const msrs)
 {
@@ -133,7 +133,7 @@ static int athlon_check_ctrs(struct pt_regs * const regs,
 	return 1;
 }
 
- 
+
 static void athlon_start(struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
@@ -150,7 +150,7 @@ static void athlon_start(struct op_msrs const * const msrs)
 
 static void athlon_stop(struct op_msrs const * const msrs)
 {
-	unsigned int low,high;
+	unsigned int low, high;
 	int i;
 
 	/* Subtle: stop on all counters to avoid race with
@@ -169,11 +169,11 @@ static void athlon_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (CTR_IS_RESERVED(msrs,i))
+		if (CTR_IS_RESERVED(msrs, i))
 			release_perfctr_nmi(MSR_K7_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
-		if (CTRL_IS_RESERVED(msrs,i))
+		if (CTRL_IS_RESERVED(msrs, i))
 			release_evntsel_nmi(MSR_K7_EVNTSEL0 + i);
 	}
 }
diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c
index c554f52cb808..eff431f6c57b 100644
--- a/arch/x86/oprofile/op_model_ppro.c
+++ b/arch/x86/oprofile/op_model_ppro.c
@@ -1,4 +1,4 @@
-/**
+/*
  * @file op_model_ppro.h
  * pentium pro / P6 model-specific MSR operations
  *
@@ -15,45 +15,45 @@
 #include <asm/msr.h>
 #include <asm/apic.h>
 #include <asm/nmi.h>
- 
+
 #include "op_x86_model.h"
 #include "op_counter.h"
 
 #define NUM_COUNTERS 2
 #define NUM_CONTROLS 2
 
-#define CTR_IS_RESERVED(msrs,c) (msrs->counters[(c)].addr ? 1 : 0)
-#define CTR_READ(l,h,msrs,c) do {rdmsr(msrs->counters[(c)].addr, (l), (h));} while (0)
-#define CTR_32BIT_WRITE(l,msrs,c)	\
-	do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0);} while (0)
+#define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0)
+#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
+#define CTR_32BIT_WRITE(l, msrs, c)	\
+	do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0)
 #define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
 
-#define CTRL_IS_RESERVED(msrs,c) (msrs->controls[(c)].addr ? 1 : 0)
-#define CTRL_READ(l,h,msrs,c) do {rdmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
-#define CTRL_WRITE(l,h,msrs,c) do {wrmsr((msrs->controls[(c)].addr), (l), (h));} while (0)
+#define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0)
+#define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
+#define CTRL_WRITE(l, h, msrs, c) do {wrmsr((msrs->controls[(c)].addr), (l), (h)); } while (0)
 #define CTRL_SET_ACTIVE(n) (n |= (1<<22))
 #define CTRL_SET_INACTIVE(n) (n &= ~(1<<22))
 #define CTRL_CLEAR(x) (x &= (1<<21))
 #define CTRL_SET_ENABLE(val) (val |= 1<<20)
-#define CTRL_SET_USR(val,u) (val |= ((u & 1) << 16))
-#define CTRL_SET_KERN(val,k) (val |= ((k & 1) << 17))
+#define CTRL_SET_USR(val, u) (val |= ((u & 1) << 16))
+#define CTRL_SET_KERN(val, k) (val |= ((k & 1) << 17))
 #define CTRL_SET_UM(val, m) (val |= (m << 8))
 #define CTRL_SET_EVENT(val, e) (val |= e)
 
 static unsigned long reset_value[NUM_COUNTERS];
- 
+
 static void ppro_fill_in_addresses(struct op_msrs * const msrs)
 {
 	int i;
 
-	for (i=0; i < NUM_COUNTERS; i++) {
+	for (i = 0; i < NUM_COUNTERS; i++) {
 		if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i))
 			msrs->counters[i].addr = MSR_P6_PERFCTR0 + i;
 		else
 			msrs->counters[i].addr = 0;
 	}
-	
-	for (i=0; i < NUM_CONTROLS; i++) {
+
+	for (i = 0; i < NUM_CONTROLS; i++) {
 		if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i))
 			msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i;
 		else
@@ -69,23 +69,23 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 
 	/* clear all counters */
 	for (i = 0 ; i < NUM_CONTROLS; ++i) {
-		if (unlikely(!CTRL_IS_RESERVED(msrs,i)))
+		if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
 			continue;
 		CTRL_READ(low, high, msrs, i);
 		CTRL_CLEAR(low);
 		CTRL_WRITE(low, high, msrs, i);
 	}
-	
+
 	/* avoid a false detection of ctr overflows in NMI handler */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if (unlikely(!CTR_IS_RESERVED(msrs,i)))
+		if (unlikely(!CTR_IS_RESERVED(msrs, i)))
 			continue;
 		CTR_32BIT_WRITE(1, msrs, i);
 	}
 
 	/* enable active counters */
 	for (i = 0; i < NUM_COUNTERS; ++i) {
-		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs,i))) {
+		if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
 			reset_value[i] = counter_config[i].count;
 
 			CTR_32BIT_WRITE(counter_config[i].count, msrs, i);
@@ -104,13 +104,13 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs)
 	}
 }
 
- 
+
 static int ppro_check_ctrs(struct pt_regs * const regs,
 			   struct op_msrs const * const msrs)
 {
 	unsigned int low, high;
 	int i;
- 
+
 	for (i = 0 ; i < NUM_COUNTERS; ++i) {
 		if (!reset_value[i])
 			continue;
@@ -135,10 +135,10 @@ static int ppro_check_ctrs(struct pt_regs * const regs,
 	return 1;
 }
 
- 
+
 static void ppro_start(struct op_msrs const * const msrs)
 {
-	unsigned int low,high;
+	unsigned int low, high;
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
@@ -153,7 +153,7 @@ static void ppro_start(struct op_msrs const * const msrs)
 
 static void ppro_stop(struct op_msrs const * const msrs)
 {
-	unsigned int low,high;
+	unsigned int low, high;
 	int i;
 
 	for (i = 0; i < NUM_COUNTERS; ++i) {
@@ -170,11 +170,11 @@ static void ppro_shutdown(struct op_msrs const * const msrs)
 	int i;
 
 	for (i = 0 ; i < NUM_COUNTERS ; ++i) {
-		if (CTR_IS_RESERVED(msrs,i))
+		if (CTR_IS_RESERVED(msrs, i))
 			release_perfctr_nmi(MSR_P6_PERFCTR0 + i);
 	}
 	for (i = 0 ; i < NUM_CONTROLS ; ++i) {
-		if (CTRL_IS_RESERVED(msrs,i))
+		if (CTRL_IS_RESERVED(msrs, i))
 			release_evntsel_nmi(MSR_P6_EVNTSEL0 + i);
 	}
 }
diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index 0234f2831bf3..2664cb3fc96c 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -151,7 +151,7 @@ adjust_transparent_bridge_resources(struct pci_bus *bus)
 
 static void
 get_current_resources(struct acpi_device *device, int busnum,
-			struct pci_bus *bus)
+			int domain, struct pci_bus *bus)
 {
 	struct pci_root_info info;
 	size_t size;
@@ -168,10 +168,10 @@ get_current_resources(struct acpi_device *device, int busnum,
 	if (!info.res)
 		goto res_alloc_fail;
 
-	info.name = kmalloc(12, GFP_KERNEL);
+	info.name = kmalloc(16, GFP_KERNEL);
 	if (!info.name)
 		goto name_alloc_fail;
-	sprintf(info.name, "PCI Bus #%02x", busnum);
+	sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum);
 
 	info.res_num = 0;
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
@@ -219,8 +219,21 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	if (pxm >= 0)
 		sd->node = pxm_to_node(pxm);
 #endif
+	/*
+	 * Maybe the desired pci bus has been already scanned. In such case
+	 * it is unnecessary to scan the pci bus with the given domain,busnum.
+	 */
+	bus = pci_find_bus(domain, busnum);
+	if (bus) {
+		/*
+		 * If the desired bus exits, the content of bus->sysdata will
+		 * be replaced by sd.
+		 */
+		memcpy(bus->sysdata, sd, sizeof(*sd));
+		kfree(sd);
+	} else
+		bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
 
-	bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd);
 	if (!bus)
 		kfree(sd);
 
@@ -228,13 +241,13 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do
 	if (bus != NULL) {
 		if (pxm >= 0) {
 			printk("bus %d -> pxm %d -> node %d\n",
-				busnum, pxm, sd->node);
+				busnum, pxm, pxm_to_node(pxm));
 		}
 	}
 #endif
 
 	if (bus && (pci_probe & PCI_USE__CRS))
-		get_current_resources(device, busnum, bus);
+		get_current_resources(device, busnum, domain, bus);
 	
 	return bus;
 }
@@ -265,8 +278,7 @@ static int __init pci_acpi_init(void)
 		printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
 		for_each_pci_dev(dev)
 			acpi_pci_irq_enable(dev);
-	} else
-		printk(KERN_INFO "PCI: If a device doesn't work, try \"pci=routeirq\".  If it helps, post a report\n");
+	}
 
 #ifdef CONFIG_X86_IO_APIC
 	if (acpi_ioapic)
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 7b6e3bb9b28c..75fcc29ecf52 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -77,59 +77,6 @@ int pcibios_scanned;
  */
 DEFINE_SPINLOCK(pci_config_lock);
 
-/*
- * Several buggy motherboards address only 16 devices and mirror
- * them to next 16 IDs. We try to detect this `feature' on all
- * primary buses (those containing host bridges as they are
- * expected to be unique) and remove the ghost devices.
- */
-
-static void __devinit pcibios_fixup_ghosts(struct pci_bus *b)
-{
-	struct list_head *ln, *mn;
-	struct pci_dev *d, *e;
-	int mirror = PCI_DEVFN(16,0);
-	int seen_host_bridge = 0;
-	int i;
-
-	DBG("PCI: Scanning for ghost devices on bus %d\n", b->number);
-	list_for_each(ln, &b->devices) {
-		d = pci_dev_b(ln);
-		if ((d->class >> 8) == PCI_CLASS_BRIDGE_HOST)
-			seen_host_bridge++;
-		for (mn=ln->next; mn != &b->devices; mn=mn->next) {
-			e = pci_dev_b(mn);
-			if (e->devfn != d->devfn + mirror ||
-			    e->vendor != d->vendor ||
-			    e->device != d->device ||
-			    e->class != d->class)
-				continue;
-			for(i=0; i<PCI_NUM_RESOURCES; i++)
-				if (e->resource[i].start != d->resource[i].start ||
-				    e->resource[i].end != d->resource[i].end ||
-				    e->resource[i].flags != d->resource[i].flags)
-					continue;
-			break;
-		}
-		if (mn == &b->devices)
-			return;
-	}
-	if (!seen_host_bridge)
-		return;
-	printk(KERN_WARNING "PCI: Ignoring ghost devices on bus %02x\n", b->number);
-
-	ln = &b->devices;
-	while (ln->next != &b->devices) {
-		d = pci_dev_b(ln->next);
-		if (d->devfn >= mirror) {
-			list_del(&d->global_list);
-			list_del(&d->bus_list);
-			kfree(d);
-		} else
-			ln = ln->next;
-	}
-}
-
 static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
 {
 	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
@@ -152,7 +99,6 @@ void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 {
 	struct pci_dev *dev;
 
-	pcibios_fixup_ghosts(b);
 	pci_read_bridge_bases(b);
 	list_for_each_entry(dev, &b->devices, bus_list)
 		pcibios_fixup_device_resources(dev);
@@ -427,10 +373,6 @@ static int __init pcibios_init(void)
 
 	if (pci_bf_sort >= pci_force_bf)
 		pci_sort_breadthfirst();
-#ifdef CONFIG_PCI_BIOS
-	if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT))
-		pcibios_sort();
-#endif
 	return 0;
 }
 
@@ -455,9 +397,6 @@ char * __devinit  pcibios_setup(char *str)
 	} else if (!strcmp(str, "nobios")) {
 		pci_probe &= ~PCI_PROBE_BIOS;
 		return NULL;
-	} else if (!strcmp(str, "nosort")) {
-		pci_probe |= PCI_NO_SORT;
-		return NULL;
 	} else if (!strcmp(str, "biosirq")) {
 		pci_probe |= PCI_BIOS_IRQ_SCAN;
 		return NULL;
@@ -527,7 +466,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
 	int err;
 
-	if ((err = pcibios_enable_resources(dev, mask)) < 0)
+	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 
 	if (!dev->msi_enabled)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 103b9dff1213..94f6c73a53d0 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -30,6 +30,9 @@
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/errno.h>
+#include <linux/bootmem.h>
+
+#include <asm/pat.h>
 
 #include "pci.h"
 
@@ -238,44 +241,6 @@ void __init pcibios_resource_survey(void)
  */
 fs_initcall(pcibios_assign_resources);
 
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1 << idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available "
-				"because of resource %d collisions\n",
-				pci_name(dev), idx);
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-			pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
@@ -297,10 +262,35 @@ void pcibios_set_master(struct pci_dev *dev)
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
+static void pci_unmap_page_range(struct vm_area_struct *vma)
+{
+	u64 addr = (u64)vma->vm_pgoff << PAGE_SHIFT;
+	free_memtype(addr, addr + vma->vm_end - vma->vm_start);
+}
+
+static void pci_track_mmap_page_range(struct vm_area_struct *vma)
+{
+	u64 addr = (u64)vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long flags = pgprot_val(vma->vm_page_prot)
+						& _PAGE_CACHE_MASK;
+
+	reserve_memtype(addr, addr + vma->vm_end - vma->vm_start, flags, NULL);
+}
+
+static struct vm_operations_struct pci_mmap_ops = {
+	.open  = pci_track_mmap_page_range,
+	.close = pci_unmap_page_range,
+};
+
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
 	unsigned long prot;
+	u64 addr = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long len = vma->vm_end - vma->vm_start;
+	unsigned long flags;
+	unsigned long new_flags;
+	int retval;
 
 	/* I/O space cannot be accessed via normal processor loads and
 	 * stores on this platform.
@@ -308,21 +298,50 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	if (mmap_state == pci_mmap_io)
 		return -EINVAL;
 
-	/* Leave vm_pgoff as-is, the PCI space address is the physical
-	 * address on this platform.
-	 */
 	prot = pgprot_val(vma->vm_page_prot);
-	if (boot_cpu_data.x86 > 3)
-		prot |= _PAGE_PCD | _PAGE_PWT;
+	if (pat_wc_enabled && write_combine)
+		prot |= _PAGE_CACHE_WC;
+	else if (boot_cpu_data.x86 > 3)
+		prot |= _PAGE_CACHE_UC;
+
 	vma->vm_page_prot = __pgprot(prot);
 
-	/* Write-combine setting is ignored, it is changed via the mtrr
-	 * interfaces on this platform.
-	 */
+	flags = pgprot_val(vma->vm_page_prot) & _PAGE_CACHE_MASK;
+	retval = reserve_memtype(addr, addr + len, flags, &new_flags);
+	if (retval)
+		return retval;
+
+	if (flags != new_flags) {
+		/*
+		 * Do not fallback to certain memory types with certain
+		 * requested type:
+		 * - request is uncached, return cannot be write-back
+		 * - request is uncached, return cannot be write-combine
+		 * - request is write-combine, return cannot be write-back
+		 */
+		if ((flags == _PAGE_CACHE_UC &&
+		     (new_flags == _PAGE_CACHE_WB ||
+		      new_flags == _PAGE_CACHE_WC)) ||
+		    (flags == _PAGE_CACHE_WC &&
+		     new_flags == _PAGE_CACHE_WB)) {
+			free_memtype(addr, addr+len);
+			return -EINVAL;
+		}
+		flags = new_flags;
+	}
+
+	if (vma->vm_pgoff <= max_pfn_mapped &&
+	    ioremap_change_attr((unsigned long)__va(addr), len, flags)) {
+		free_memtype(addr, addr + len);
+		return -EINVAL;
+	}
+
 	if (io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
 			       vma->vm_end - vma->vm_start,
 			       vma->vm_page_prot))
 		return -EAGAIN;
 
+	vma->vm_ops = &pci_mmap_ops;
+
 	return 0;
 }
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index a8715861877e..579745ca6b66 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -200,7 +200,7 @@ static int pirq_ali_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
 	static const unsigned char irqmap[16] = { 0, 9, 3, 10, 4, 5, 7, 6, 1, 11, 0, 12, 0, 14, 0, 15 };
 
-	WARN_ON_ONCE(pirq >= 16);
+	WARN_ON_ONCE(pirq > 16);
 	return irqmap[read_config_nybble(router, 0x48, pirq-1)];
 }
 
@@ -209,7 +209,7 @@ static int pirq_ali_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i
 	static const unsigned char irqmap[16] = { 0, 8, 0, 2, 4, 5, 7, 6, 0, 1, 3, 9, 11, 0, 13, 15 };
 	unsigned int val = irqmap[irq];
 
-	WARN_ON_ONCE(pirq >= 16);
+	WARN_ON_ONCE(pirq > 16);
 	if (val) {
 		write_config_nybble(router, 0x48, pirq-1, val);
 		return 1;
@@ -260,7 +260,7 @@ static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 {
 	static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
 
-	WARN_ON_ONCE(pirq >= 5);
+	WARN_ON_ONCE(pirq > 5);
 	return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
 }
 
@@ -268,7 +268,7 @@ static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq
 {
 	static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 };
 
-	WARN_ON_ONCE(pirq >= 5);
+	WARN_ON_ONCE(pirq > 5);
 	write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
 	return 1;
 }
@@ -282,7 +282,7 @@ static int pirq_ite_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
 	static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
 
-	WARN_ON_ONCE(pirq >= 4);
+	WARN_ON_ONCE(pirq > 4);
 	return read_config_nybble(router,0x43, pirqmap[pirq-1]);
 }
 
@@ -290,7 +290,7 @@ static int pirq_ite_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i
 {
 	static const unsigned char pirqmap[4] = { 1, 0, 2, 3 };
 
-	WARN_ON_ONCE(pirq >= 4);
+	WARN_ON_ONCE(pirq > 4);
 	write_config_nybble(router, 0x43, pirqmap[pirq-1], irq);
 	return 1;
 }
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
index 55270c26237c..d9afbae5092b 100644
--- a/arch/x86/pci/numa.c
+++ b/arch/x86/pci/numa.c
@@ -11,11 +11,41 @@
 #define XQUAD_PORTIO_BASE 0xfe400000
 #define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
 
+int mp_bus_id_to_node[MAX_MP_BUSSES];
 #define BUS2QUAD(global) (mp_bus_id_to_node[global])
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
 #define BUS2LOCAL(global) (mp_bus_id_to_local[global])
+
+void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+	struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+	       m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
 #define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
+void mpc_oem_pci_bus(struct mpc_config_bus *m,
+	struct mpc_config_translation *translation)
+{
+	int quad = translation->trans_quad;
+	int local = translation->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+#ifdef CONFIG_X86_NUMAQ
+EXPORT_SYMBOL(xquad_portio);
+#endif
 
-extern void *xquad_portio;    /* Where the IO area was mapped */
 #define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
 
 #define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
diff --git a/arch/x86/pci/pcbios.c b/arch/x86/pci/pcbios.c
index 10ac8c316c46..37472fc6f729 100644
--- a/arch/x86/pci/pcbios.c
+++ b/arch/x86/pci/pcbios.c
@@ -152,28 +152,6 @@ static int __devinit check_pcibios(void)
 	return 0;
 }
 
-static int __devinit pci_bios_find_device (unsigned short vendor, unsigned short device_id,
-					unsigned short index, unsigned char *bus, unsigned char *device_fn)
-{
-	unsigned short bx;
-	unsigned short ret;
-
-	__asm__("lcall *(%%edi); cld\n\t"
-		"jc 1f\n\t"
-		"xor %%ah, %%ah\n"
-		"1:"
-		: "=b" (bx),
-		  "=a" (ret)
-		: "1" (PCIBIOS_FIND_PCI_DEVICE),
-		  "c" (device_id),
-		  "d" (vendor),
-		  "S" ((int) index),
-		  "D" (&pci_indirect));
-	*bus = (bx >> 8) & 0xff;
-	*device_fn = bx & 0xff;
-	return (int) (ret & 0xff00) >> 8;
-}
-
 static int pci_bios_read(unsigned int seg, unsigned int bus,
 			 unsigned int devfn, int reg, int len, u32 *value)
 {
@@ -198,6 +176,11 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 			  "b" (bx),
 			  "D" ((long)reg),
 			  "S" (&pci_indirect));
+		/*
+		 * Zero-extend the result beyond 8 bits, do not trust the
+		 * BIOS having done it:
+		 */
+		*value &= 0xff;
 		break;
 	case 2:
 		__asm__("lcall *(%%esi); cld\n\t"
@@ -210,6 +193,11 @@ static int pci_bios_read(unsigned int seg, unsigned int bus,
 			  "b" (bx),
 			  "D" ((long)reg),
 			  "S" (&pci_indirect));
+		/*
+		 * Zero-extend the result beyond 16 bits, do not trust the
+		 * BIOS having done it:
+		 */
+		*value &= 0xffff;
 		break;
 	case 4:
 		__asm__("lcall *(%%esi); cld\n\t"
@@ -354,55 +342,6 @@ static struct pci_raw_ops * __devinit pci_find_bios(void)
 }
 
 /*
- * Sort the device list according to PCI BIOS. Nasty hack, but since some
- * fool forgot to define the `correct' device order in the PCI BIOS specs
- * and we want to be (possibly bug-to-bug ;-]) compatible with older kernels
- * which used BIOS ordering, we are bound to do this...
- */
-
-void __devinit pcibios_sort(void)
-{
-	LIST_HEAD(sorted_devices);
-	struct list_head *ln;
-	struct pci_dev *dev, *d;
-	int idx, found;
-	unsigned char bus, devfn;
-
-	DBG("PCI: Sorting device list...\n");
-	while (!list_empty(&pci_devices)) {
-		ln = pci_devices.next;
-		dev = pci_dev_g(ln);
-		idx = found = 0;
-		while (pci_bios_find_device(dev->vendor, dev->device, idx, &bus, &devfn) == PCIBIOS_SUCCESSFUL) {
-			idx++;
-			list_for_each(ln, &pci_devices) {
-				d = pci_dev_g(ln);
-				if (d->bus->number == bus && d->devfn == devfn) {
-					list_move_tail(&d->global_list, &sorted_devices);
-					if (d == dev)
-						found = 1;
-					break;
-				}
-			}
-			if (ln == &pci_devices) {
-				printk(KERN_WARNING "PCI: BIOS reporting unknown device %02x:%02x\n", bus, devfn);
-				/*
-				 * We must not continue scanning as several buggy BIOSes
-				 * return garbage after the last device. Grr.
-				 */
-				break;
-			}
-		}
-		if (!found) {
-			printk(KERN_WARNING "PCI: Device %s not found by BIOS\n",
-				pci_name(dev));
-			list_move_tail(&dev->global_list, &sorted_devices);
-		}
-	}
-	list_splice(&sorted_devices, &pci_devices);
-}
-
-/*
  *  BIOS Functions for IRQ Routing
  */
 
@@ -485,7 +424,6 @@ void __init pci_pcbios_init(void)
 {
 	if ((pci_probe & PCI_PROBE_BIOS) 
 		&& ((raw_pci_ops = pci_find_bios()))) {
-		pci_probe |= PCI_BIOS_SORT;
 		pci_bios_present = 1;
 	}
 }
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index 3431518d921a..c4bddaeff619 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -19,8 +19,6 @@
 #define PCI_PROBE_MASK		0x000f
 #define PCI_PROBE_NOEARLY	0x0010
 
-#define PCI_NO_SORT		0x0100
-#define PCI_BIOS_SORT		0x0200
 #define PCI_NO_CHECKS		0x0400
 #define PCI_USE_PIRQ_MASK	0x0800
 #define PCI_ASSIGN_ROMS		0x1000
@@ -44,7 +42,6 @@ enum pci_bf_sort_state {
 extern unsigned int pcibios_max_latency;
 
 void pcibios_resource_survey(void);
-int pcibios_enable_resources(struct pci_dev *, int);
 
 /* pci-pc.c */
 
@@ -101,7 +98,6 @@ extern int pci_direct_probe(void);
 extern void pci_direct_init(int type);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(int type);
-extern void pcibios_sort(void);
 
 /* pci-mmconfig.c */
 
diff --git a/arch/x86/power/cpu_32.c b/arch/x86/power/cpu_32.c
index 7f9c6da04a4c..7dc5d5cf50a2 100644
--- a/arch/x86/power/cpu_32.c
+++ b/arch/x86/power/cpu_32.c
@@ -27,17 +27,17 @@ static void __save_processor_state(struct saved_context *ctxt)
 	/*
 	 * descriptor tables
 	 */
- 	store_gdt(&ctxt->gdt);
- 	store_idt(&ctxt->idt);
- 	store_tr(ctxt->tr);
+	store_gdt(&ctxt->gdt);
+	store_idt(&ctxt->idt);
+	store_tr(ctxt->tr);
 
 	/*
 	 * segment registers
 	 */
- 	savesegment(es, ctxt->es);
- 	savesegment(fs, ctxt->fs);
- 	savesegment(gs, ctxt->gs);
- 	savesegment(ss, ctxt->ss);
+	savesegment(es, ctxt->es);
+	savesegment(fs, ctxt->fs);
+	savesegment(gs, ctxt->gs);
+	savesegment(ss, ctxt->ss);
 
 	/*
 	 * control registers
@@ -48,10 +48,12 @@ static void __save_processor_state(struct saved_context *ctxt)
 	ctxt->cr4 = read_cr4();
 }
 
+/* Needed by apm.c */
 void save_processor_state(void)
 {
 	__save_processor_state(&saved_context);
 }
+EXPORT_SYMBOL(save_processor_state);
 
 static void do_fpu_end(void)
 {
@@ -64,9 +66,14 @@ static void do_fpu_end(void)
 static void fix_processor_context(void)
 {
 	int cpu = smp_processor_id();
-	struct tss_struct * t = &per_cpu(init_tss, cpu);
+	struct tss_struct *t = &per_cpu(init_tss, cpu);
 
-	set_tss_desc(cpu,t);	/* This just modifies memory; should not be necessary. But... This is necessary, because 386 hardware has concept of busy TSS or some similar stupidity. */
+	set_tss_desc(cpu, t);	/*
+				 * This just modifies memory; should not be
+				 * necessary. But... This is necessary, because
+				 * 386 hardware has concept of busy TSS or some
+				 * similar stupidity.
+				 */
 
 	load_TR_desc();				/* This does ltr */
 	load_LDT(&current->active_mm->context);	/* This does lldt */
@@ -100,16 +107,16 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	 * now restore the descriptor tables to their proper values
 	 * ltr is done i fix_processor_context().
 	 */
- 	load_gdt(&ctxt->gdt);
- 	load_idt(&ctxt->idt);
+	load_gdt(&ctxt->gdt);
+	load_idt(&ctxt->idt);
 
 	/*
 	 * segment registers
 	 */
- 	loadsegment(es, ctxt->es);
- 	loadsegment(fs, ctxt->fs);
- 	loadsegment(gs, ctxt->gs);
- 	loadsegment(ss, ctxt->ss);
+	loadsegment(es, ctxt->es);
+	loadsegment(fs, ctxt->fs);
+	loadsegment(gs, ctxt->gs);
+	loadsegment(ss, ctxt->ss);
 
 	/*
 	 * sysenter MSRs
@@ -123,11 +130,9 @@ static void __restore_processor_state(struct saved_context *ctxt)
 	mcheck_init(&boot_cpu_data);
 }
 
+/* Needed by apm.c */
 void restore_processor_state(void)
 {
 	__restore_processor_state(&saved_context);
 }
-
-/* Needed by apm.c */
-EXPORT_SYMBOL(save_processor_state);
 EXPORT_SYMBOL(restore_processor_state);
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index 0a8f4742ef51..b7ad9f89d21f 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -37,9 +37,10 @@ $(obj)/%.so: OBJCOPYFLAGS := -S
 $(obj)/%.so: $(obj)/%.so.dbg FORCE
 	$(call if_changed,objcopy)
 
-CFL := $(PROFILING) -mcmodel=small -fPIC -g0 -O2 -fasynchronous-unwind-tables -m64
+CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \
+       $(filter -g%,$(KBUILD_CFLAGS))
 
-$(vobjs): KBUILD_CFLAGS = $(CFL)
+$(vobjs): KBUILD_CFLAGS += $(CFL)
 
 targets += vdso-syms.lds
 obj-$(VDSO64-y)			+= vdso-syms.lds
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 348f1341e1c8..e2af8eee80e3 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -210,8 +210,12 @@ static int use_sysenter __read_mostly = -1;
 /* May not be __init: called during resume */
 void syscall32_cpu_init(void)
 {
-	if (use_sysenter < 0)
-		use_sysenter = (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL);
+	if (use_sysenter < 0) {
+		if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+			use_sysenter = 1;
+		if (boot_cpu_data.x86_vendor == X86_VENDOR_CENTAUR)
+			use_sysenter = 1;
+	}
 
 	/* Load these always in case some future AMD CPU supports
 	   SYSENTER from compat mode too. */
@@ -325,6 +329,9 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack)
 	int ret = 0;
 	bool compat;
 
+	if (vdso_enabled == VDSO_DISABLED)
+		return 0;
+
 	down_write(&mm->mmap_sem);
 
 	/* Test compat mode once here, in case someone
diff --git a/arch/x86/video/fbdev.c b/arch/x86/video/fbdev.c
index 48fb38d7d2c0..4db42bff8c60 100644
--- a/arch/x86/video/fbdev.c
+++ b/arch/x86/video/fbdev.c
@@ -1,5 +1,4 @@
 /*
- * arch/i386/video/fbdev.c - i386 Framebuffer
  *
  * Copyright (C) 2007 Antonino Daplas <adaplas@gmail.com>
  *
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 8b9ee27805fd..c0388220cf97 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -25,6 +25,7 @@
 #include <linux/mm.h>
 #include <linux/page-flags.h>
 #include <linux/highmem.h>
+#include <linux/console.h>
 
 #include <xen/interface/xen.h>
 #include <xen/interface/physdev.h>
@@ -95,7 +96,7 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&dummy_shared_info;
  *
  * 0: not available, 1: available
  */
-static int have_vcpu_info_placement = 0;
+static int have_vcpu_info_placement = 1;
 
 static void __init xen_vcpu_setup(int cpu)
 {
@@ -103,6 +104,7 @@ static void __init xen_vcpu_setup(int cpu)
 	int err;
 	struct vcpu_info *vcpup;
 
+	BUG_ON(HYPERVISOR_shared_info == &dummy_shared_info);
 	per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu];
 
 	if (!have_vcpu_info_placement)
@@ -666,10 +668,10 @@ static void xen_release_pt_init(u32 pfn)
 	make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 }
 
-static void pin_pagetable_pfn(unsigned level, unsigned long pfn)
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
 {
 	struct mmuext_op op;
-	op.cmd = level;
+	op.cmd = cmd;
 	op.arg1.mfn = pfn_to_mfn(pfn);
 	if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
 		BUG();
@@ -686,7 +688,8 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
 
 		if (!PageHighMem(page)) {
 			make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
-			pin_pagetable_pfn(level, pfn);
+			if (level == PT_PTE)
+				pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
 		} else
 			/* make sure there are no stray mappings of
 			   this page */
@@ -696,27 +699,39 @@ static void xen_alloc_ptpage(struct mm_struct *mm, u32 pfn, unsigned level)
 
 static void xen_alloc_pt(struct mm_struct *mm, u32 pfn)
 {
-	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L1_TABLE);
+	xen_alloc_ptpage(mm, pfn, PT_PTE);
 }
 
 static void xen_alloc_pd(struct mm_struct *mm, u32 pfn)
 {
-	xen_alloc_ptpage(mm, pfn, MMUEXT_PIN_L2_TABLE);
+	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
 /* This should never happen until we're OK to use struct page */
-static void xen_release_pt(u32 pfn)
+static void xen_release_ptpage(u32 pfn, unsigned level)
 {
 	struct page *page = pfn_to_page(pfn);
 
 	if (PagePinned(page)) {
 		if (!PageHighMem(page)) {
-			pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
+			if (level == PT_PTE)
+				pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
 			make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
 		}
+		ClearPagePinned(page);
 	}
 }
 
+static void xen_release_pt(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PTE);
+}
+
+static void xen_release_pd(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PMD);
+}
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -805,33 +820,43 @@ static __init void xen_pagetable_setup_start(pgd_t *base)
 			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
-static __init void xen_pagetable_setup_done(pgd_t *base)
+static __init void setup_shared_info(void)
 {
-	/* This will work as long as patching hasn't happened yet
-	   (which it hasn't) */
-	pv_mmu_ops.alloc_pt = xen_alloc_pt;
-	pv_mmu_ops.alloc_pd = xen_alloc_pd;
-	pv_mmu_ops.release_pt = xen_release_pt;
-	pv_mmu_ops.release_pd = xen_release_pt;
-	pv_mmu_ops.set_pte = xen_set_pte;
-
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
+		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
+
 		/*
 		 * Create a mapping for the shared info page.
 		 * Should be set_fixmap(), but shared_info is a machine
 		 * address with no corresponding pseudo-phys address.
 		 */
-		set_pte_mfn(fix_to_virt(FIX_PARAVIRT_BOOTMAP),
+		set_pte_mfn(addr,
 			    PFN_DOWN(xen_start_info->shared_info),
 			    PAGE_KERNEL);
 
-		HYPERVISOR_shared_info =
-			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
+		HYPERVISOR_shared_info = (struct shared_info *)addr;
 	} else
 		HYPERVISOR_shared_info =
 			(struct shared_info *)__va(xen_start_info->shared_info);
 
+#ifndef CONFIG_SMP
+	/* In UP this is as good a place as any to set up shared info */
+	xen_setup_vcpu_info_placement();
+#endif
+}
+
+static __init void xen_pagetable_setup_done(pgd_t *base)
+{
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	pv_mmu_ops.alloc_pt = xen_alloc_pt;
+	pv_mmu_ops.alloc_pd = xen_alloc_pd;
+	pv_mmu_ops.release_pt = xen_release_pt;
+	pv_mmu_ops.release_pd = xen_release_pd;
+	pv_mmu_ops.set_pte = xen_set_pte;
+
+	setup_shared_info();
+
 	/* Actually pin the pagetable down, but we can't set PG_pinned
 	   yet because the page structures don't exist yet. */
 	{
@@ -865,7 +890,6 @@ void __init xen_setup_vcpu_info_placement(void)
 		pv_irq_ops.irq_disable = xen_irq_disable_direct;
 		pv_irq_ops.irq_enable = xen_irq_enable_direct;
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
-		pv_cpu_ops.iret = xen_iret_direct;
 	}
 }
 
@@ -969,7 +993,7 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
-	.iret = (void *)&hypercall_page[__HYPERVISOR_iret],
+	.iret = xen_iret,
 	.irq_enable_syscall_ret = NULL,  /* never called */
 
 	.load_tr_desc = paravirt_nop,
@@ -1182,15 +1206,9 @@ asmlinkage void __init xen_start_kernel(void)
 	x86_write_percpu(xen_cr3, __pa(pgd));
 	x86_write_percpu(xen_current_cr3, __pa(pgd));
 
-#ifdef CONFIG_SMP
 	/* Don't do the full vcpu_info placement stuff until we have a
-	   possible map. */
+	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
-#else
-	/* May as well do it now, since there's no good time to call
-	   it later on UP. */
-	xen_setup_vcpu_info_placement();
-#endif
 
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
@@ -1210,6 +1228,9 @@ asmlinkage void __init xen_start_kernel(void)
 		? __pa(xen_start_info->mod_start) : 0;
 	boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
 
+	if (!is_initial_xendomain())
+		add_preferred_console("hvc", 0, NULL);
+
 	/* Start the world */
 	start_kernel();
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 0144395448ae..2a054ef2a3da 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -310,13 +310,6 @@ pgd_t xen_make_pgd(unsigned long pgd)
 }
 #endif	/* CONFIG_X86_PAE */
 
-enum pt_level {
-	PT_PGD,
-	PT_PUD,
-	PT_PMD,
-	PT_PTE
-};
-
 /*
   (Yet another) pagetable walker.  This one is intended for pinning a
   pagetable.  This means that it walks a pagetable and calls the
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index c9ff27f3ac3a..b5e189b1519d 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -3,6 +3,13 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 
+enum pt_level {
+	PT_PGD,
+	PT_PUD,
+	PT_PMD,
+	PT_PTE
+};
+
 /*
  * Page-directory addresses above 4GB do not fit into architectural %cr3.
  * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 5e6f36f6d876..5791eb2e3750 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -76,7 +76,7 @@ void xen_mc_flush(void)
 		if (ret) {
 			printk(KERN_ERR "%d multicall(s) failed: cpu %d\n",
 			       ret, smp_processor_id());
-			for(i = 0; i < b->mcidx; i++) {
+			for (i = 0; i < b->mcidx; i++) {
 				printk("  call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
 				       i+1, b->mcidx,
 				       b->debug[i].op,
@@ -93,7 +93,7 @@ void xen_mc_flush(void)
 
 	local_irq_restore(flags);
 
-	for(i = 0; i < b->cbidx; i++) {
+	for (i = 0; i < b->cbidx; i++) {
 		struct callback *cb = &b->callbacks[i];
 
 		(*cb->fn)(cb->data);
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 3bad4773a2f3..2341492bf7a0 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -38,7 +38,8 @@ char * __init xen_memory_setup(void)
 	unsigned long max_pfn = xen_start_info->nr_pages;
 
 	e820.nr_map = 0;
-	add_memory_region(0, PFN_PHYS(max_pfn), E820_RAM);
+	add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+	add_memory_region(HIGH_MEMORY, PFN_PHYS(max_pfn)-HIGH_MEMORY, E820_RAM);
 
 	return "Xen";
 }
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index aafc54437403..e340ff92f6b6 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -35,7 +35,7 @@
 #include "xen-ops.h"
 #include "mmu.h"
 
-static cpumask_t cpu_initialized_map;
+static cpumask_t xen_cpu_initialized_map;
 static DEFINE_PER_CPU(int, resched_irq);
 static DEFINE_PER_CPU(int, callfunc_irq);
 
@@ -179,7 +179,7 @@ void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 	if (xen_smp_intr_init(0))
 		BUG();
 
-	cpu_initialized_map = cpumask_of_cpu(0);
+	xen_cpu_initialized_map = cpumask_of_cpu(0);
 
 	/* Restrict the possible_map according to max_cpus. */
 	while ((num_possible_cpus() > 1) && (num_possible_cpus() > max_cpus)) {
@@ -210,7 +210,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	struct vcpu_guest_context *ctxt;
 	struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
 
-	if (cpu_test_and_set(cpu, cpu_initialized_map))
+	if (cpu_test_and_set(cpu, xen_cpu_initialized_map))
 		return 0;
 
 	ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S
index 1a43b60c0c62..fe161ed4b01e 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm.S
@@ -33,12 +33,17 @@
 	events, then enter the hypervisor to get them handled.
  */
 ENTRY(xen_irq_enable_direct)
-	/* Clear mask and test pending */
-	andw $0x00ff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_mask
+
 	/* Preempt here doesn't matter because that will deal with
 	   any pending interrupts.  The pending check may end up being
 	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info)+XEN_vcpu_info_pending
 	jz 1f
+
 2:	call check_events
 1:
 ENDPATCH(xen_irq_enable_direct)
@@ -130,13 +135,8 @@ ENDPATCH(xen_restore_fl_direct)
 	current stack state in whatever form its in, we keep things
 	simple by only using a single register which is pushed/popped
 	on the stack.
-
-	Non-direct iret could be done in the same way, but it would
-	require an annoying amount of code duplication.  We'll assume
-	that direct mode will be the common case once the hypervisor
-	support becomes commonplace.
  */
-ENTRY(xen_iret_direct)
+ENTRY(xen_iret)
 	/* test eflags for special cases */
 	testl $(X86_EFLAGS_VM | XEN_EFLAGS_NMI), 8(%esp)
 	jnz hyper_iret
@@ -150,9 +150,9 @@ ENTRY(xen_iret_direct)
 	GET_THREAD_INFO(%eax)
 	movl TI_cpu(%eax),%eax
 	movl __per_cpu_offset(,%eax,4),%eax
-	lea per_cpu__xen_vcpu_info(%eax),%eax
+	mov per_cpu__xen_vcpu(%eax),%eax
 #else
-	movl $per_cpu__xen_vcpu_info, %eax
+	movl per_cpu__xen_vcpu, %eax
 #endif
 
 	/* check IF state we're restoring */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index b02a909bfd4c..956a491ea998 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -63,5 +63,5 @@ DECL_ASM(void, xen_irq_disable_direct, void);
 DECL_ASM(unsigned long, xen_save_fl_direct, void);
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
-void xen_iret_direct(void);
+void xen_iret(void);
 #endif /* XEN_OPS_H */
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index f582d6a24ec2..7419dbccf027 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -5,7 +5,7 @@
 extra-y := head.o vmlinux.lds
 
 
-obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o semaphore.o  \
+obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
 	 setup.o signal.o syscall.o time.o traps.o vectors.o platform.o  \
 	 pci-dma.o init_task.o io.o
 
diff --git a/arch/xtensa/kernel/semaphore.c b/arch/xtensa/kernel/semaphore.c
deleted file mode 100644
index 995c6410ae10..000000000000
--- a/arch/xtensa/kernel/semaphore.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * arch/xtensa/kernel/semaphore.c
- *
- * Generic semaphore code. Buyer beware. Do your own specific changes
- * in <asm/semaphore-helper.h>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001 - 2005 Tensilica Inc.
- *
- * Joe Taylor	<joe@tensilica.com, joetylr@yahoo.com>
- * Chris Zankel	<chris@zankel.net>
- * Marc Gauthier<marc@tensilica.com, marc@alumni.uwaterloo.ca>
- * Kevin Chea
- */
-
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/init.h>
-#include <asm/semaphore.h>
-#include <asm/errno.h>
-
-/*
- * These two _must_ execute atomically wrt each other.
- */
-
-static __inline__ void wake_one_more(struct semaphore * sem)
-{
-	atomic_inc((atomic_t *)&sem->sleepers);
-}
-
-static __inline__ int waking_non_zero(struct semaphore *sem)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&semaphore_wake_lock, flags);
-	if (sem->sleepers > 0) {
-		sem->sleepers--;
-		ret = 1;
-	}
-	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-	return ret;
-}
-
-/*
- * waking_non_zero_interruptible:
- *	1	got the lock
- *	0	go to sleep
- *	-EINTR	interrupted
- *
- * We must undo the sem->count down_interruptible() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-
-static __inline__ int waking_non_zero_interruptible(struct semaphore *sem,
-						struct task_struct *tsk)
-{
-	unsigned long flags;
-	int ret = 0;
-
-	spin_lock_irqsave(&semaphore_wake_lock, flags);
-	if (sem->sleepers > 0) {
-		sem->sleepers--;
-		ret = 1;
-	} else if (signal_pending(tsk)) {
-		atomic_inc(&sem->count);
-		ret = -EINTR;
-	}
-	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-	return ret;
-}
-
-/*
- * waking_non_zero_trylock:
- *	1	failed to lock
- *	0	got the lock
- *
- * We must undo the sem->count down_trylock() increment while we are
- * protected by the spinlock in order to make atomic this atomic_inc() with the
- * atomic_read() in wake_one_more(), otherwise we can race. -arca
- */
-
-static __inline__ int waking_non_zero_trylock(struct semaphore *sem)
-{
-	unsigned long flags;
-	int ret = 1;
-
-	spin_lock_irqsave(&semaphore_wake_lock, flags);
-	if (sem->sleepers <= 0)
-		atomic_inc(&sem->count);
-	else {
-		sem->sleepers--;
-		ret = 0;
-	}
-	spin_unlock_irqrestore(&semaphore_wake_lock, flags);
-	return ret;
-}
-
-DEFINE_SPINLOCK(semaphore_wake_lock);
-
-/*
- * Semaphores are implemented using a two-way counter:
- * The "count" variable is decremented for each process
- * that tries to sleep, while the "waking" variable is
- * incremented when the "up()" code goes to wake up waiting
- * processes.
- *
- * Notably, the inline "up()" and "down()" functions can
- * efficiently test if they need to do any extra work (up
- * needs to do something only if count was negative before
- * the increment operation.
- *
- * waking_non_zero() (from asm/semaphore.h) must execute
- * atomically.
- *
- * When __up() is called, the count was negative before
- * incrementing it, and we need to wake up somebody.
- *
- * This routine adds one to the count of processes that need to
- * wake up and exit.  ALL waiting processes actually wake up but
- * only the one that gets to the "waking" field first will gate
- * through and acquire the semaphore.  The others will go back
- * to sleep.
- *
- * Note that these functions are only called when there is
- * contention on the lock, and as such all this is the
- * "non-critical" part of the whole semaphore business. The
- * critical part is the inline stuff in <asm/semaphore.h>
- * where we want to avoid any extra jumps and calls.
- */
-
-void __up(struct semaphore *sem)
-{
-	wake_one_more(sem);
-	wake_up(&sem->wait);
-}
-
-/*
- * Perform the "down" function.  Return zero for semaphore acquired,
- * return negative for signalled out of the function.
- *
- * If called from __down, the return is ignored and the wait loop is
- * not interruptible.  This means that a task waiting on a semaphore
- * using "down()" cannot be killed until someone does an "up()" on
- * the semaphore.
- *
- * If called from __down_interruptible, the return value gets checked
- * upon return.  If the return value is negative then the task continues
- * with the negative value in the return register (it can be tested by
- * the caller).
- *
- * Either form may be used in conjunction with "up()".
- *
- */
-
-#define DOWN_VAR				\
-	struct task_struct *tsk = current;	\
-	wait_queue_t wait;			\
-	init_waitqueue_entry(&wait, tsk);
-
-#define DOWN_HEAD(task_state)						\
-									\
-									\
-	tsk->state = (task_state);					\
-	add_wait_queue(&sem->wait, &wait);				\
-									\
-	/*								\
-	 * Ok, we're set up.  sem->count is known to be less than zero	\
-	 * so we must wait.						\
-	 *								\
-	 * We can let go the lock for purposes of waiting.		\
-	 * We re-acquire it after awaking so as to protect		\
-	 * all semaphore operations.					\
-	 *								\
-	 * If "up()" is called before we call waking_non_zero() then	\
-	 * we will catch it right away.  If it is called later then	\
-	 * we will have to go through a wakeup cycle to catch it.	\
-	 *								\
-	 * Multiple waiters contend for the semaphore lock to see	\
-	 * who gets to gate through and who has to wait some more.	\
-	 */								\
-	for (;;) {
-
-#define DOWN_TAIL(task_state)			\
-		tsk->state = (task_state);	\
-	}					\
-	tsk->state = TASK_RUNNING;		\
-	remove_wait_queue(&sem->wait, &wait);
-
-void __sched __down(struct semaphore * sem)
-{
-	DOWN_VAR
-	DOWN_HEAD(TASK_UNINTERRUPTIBLE)
-	if (waking_non_zero(sem))
-		break;
-	schedule();
-	DOWN_TAIL(TASK_UNINTERRUPTIBLE)
-}
-
-int __sched __down_interruptible(struct semaphore * sem)
-{
-	int ret = 0;
-	DOWN_VAR
-	DOWN_HEAD(TASK_INTERRUPTIBLE)
-
-	ret = waking_non_zero_interruptible(sem, tsk);
-	if (ret)
-	{
-		if (ret == 1)
-			/* ret != 0 only if we get interrupted -arca */
-			ret = 0;
-		break;
-	}
-	schedule();
-	DOWN_TAIL(TASK_INTERRUPTIBLE)
-	return ret;
-}
-
-int __down_trylock(struct semaphore * sem)
-{
-	return waking_non_zero_trylock(sem);
-}
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 60dbdb43fb4c..6e52cdd6166f 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -26,7 +26,6 @@
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgalloc.h>
-#include <asm/semaphore.h>
 #ifdef CONFIG_BLK_DEV_FD
 #include <asm/floppy.h>
 #endif
@@ -71,14 +70,6 @@ EXPORT_SYMBOL(__umodsi3);
 EXPORT_SYMBOL(__udivdi3);
 EXPORT_SYMBOL(__umoddi3);
 
-/*
- * Semaphore operations
- */
-EXPORT_SYMBOL(__down);
-EXPORT_SYMBOL(__down_interruptible);
-EXPORT_SYMBOL(__down_trylock);
-EXPORT_SYMBOL(__up);
-
 #ifdef CONFIG_NET
 /*
  * Networking support