diff options
Diffstat (limited to 'arch')
54 files changed, 416 insertions, 211 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84449dd8f031..b1b27525b24d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -293,6 +293,7 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 153a4b2d12b5..c9b4f27d191e 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -11,7 +11,7 @@ /include/ "mmp2.dtsi" / { - model = "Marvell MMP2 Aspenite Development Board"; + model = "Marvell MMP2 Brownstone Development Board"; compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; chosen { @@ -19,7 +19,7 @@ }; memory { - reg = <0x00000000 0x04000000>; + reg = <0x00000000 0x08000000>; }; soc { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea7cc0e..581cb081cb0f 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index f8437dd238c2..ded4652ada80 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,8 @@ -obj-y := clock.o highbank.o system.o +obj-y := clock.o highbank.o system.o smc.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) + obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index d8e2d0be64ac..141ed5171826 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void); static inline void highbank_lluart_map_io(void) {} #endif +extern void highbank_smc1(int fn, int arg); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 410a112bb52e..8777612b1a42 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = { {} }; +#ifdef CONFIG_CACHE_L2X0 +static void highbank_l2x0_disable(void) +{ + /* Disable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x0); +} +#endif + static void __init highbank_init_irq(void) { of_irq_init(irq_match); + +#ifdef CONFIG_CACHE_L2X0 + /* Enable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x1); l2x0_of_init(0, ~0UL); + outer_cache.disable = highbank_l2x0_disable; +#endif } static void __init highbank_timer_init(void) diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S new file mode 100644 index 000000000000..407d17baaaa9 --- /dev/null +++ b/arch/arm/mach-highbank/smc.S @@ -0,0 +1,27 @@ +/* + * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc. + * Copyright 2012 Calxeda, Inc. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/* + * This is common routine to manage secure monitor API + * used to modify the PL310 secure registers. + * 'r0' contains the value to be modified and 'r12' contains + * the monitor API number. + * Function signature : void highbank_smc1(u32 fn, u32 arg) + */ + +ENTRY(highbank_smc1) + stmfd sp!, {r4-r11, lr} + mov r12, r0 + mov r0, r1 + dsb + smc #0 + ldmfd sp!, {r4-r11, pc} +ENDPROC(highbank_smc1) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0021f726b153..eff4db5de0dd 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -477,6 +477,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 0f0beb580b73..516ddee1948e 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); - mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), - MX1_TIM1_INT); + mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 4e4f384ee8dd..ea13e61bd5f3 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL); clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL); - mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), - MX21_INT_GPT1); + mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d9833bb5fd61..fdd8cc87c9fe 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -243,6 +243,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 50a7ebd8d1b2..295cbd7c08dc 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); - mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), - MX27_INT_GPT1); + mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); clk_prepare_enable(clk[emi_ahb_gate]); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index a854b9cae5ea..c9a06d800f8e 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref) mx31_revision(); clk_disable_unprepare(clk[iim_gate]); - mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), - MX31_INT_GPT); + mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a9e60bf7dd75..920a8cc42726 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -267,11 +267,9 @@ int __init mx35_clocks_init() imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(&epit1_clk, - MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); + epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); #else - mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), - MX35_INT_GPT); + mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); #endif return 0; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index fcd94f3b0f0e..a2200c77bf70 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, periph_apm_sel, ARRAY_SIZE(periph_apm_sel)); clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1, main_bus_sel, ARRAY_SIZE(main_bus_sel)); - clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1, + clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1, per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel)); clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2); clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3); clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3); - clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0, + clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1, per_root_sel, ARRAY_SIZE(per_root_sel)); clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3); clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28); @@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 166250000); /* System timer */ - mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), - MX51_INT_GPT); + mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX51", mx51_revision()); @@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 200000000); /* System timer */ - mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), - MX53_INT_GPT); + mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index cab02d0a15d6..17dc66a085a5 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5 "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; -static const char * const clks_init_on[] __initconst = { - "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3", -}; - enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m, @@ -161,11 +157,14 @@ enum mx6q_clks { static struct clk *clk[clk_max]; +static enum mx6q_clks const clks_init_on[] __initconst = { + mmdc_ch0_axi, mmdc_ch1_axi, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; - struct clk *c; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -424,21 +423,14 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { - c = clk_get_sys(clks_init_on[i], NULL); - if (IS_ERR(c)) { - pr_err("%s: failed to get clk %s", __func__, - clks_init_on[i]); - return PTR_ERR(c); - } - clk_prepare_enable(c); - } + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(NULL, base, irq); + mxc_timer_init(base, irq); return 0; } diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 4685919deb63..0440379e3628 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -74,30 +74,15 @@ struct clk_pllv2 { void __iomem *base; }; -static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate, + u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn) { long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; - unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; - void __iomem *pllbase; + unsigned long dbl; s64 temp; - struct clk_pllv2 *pll = to_clk_pllv2(hw); - - pllbase = pll->base; - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; mfi = (mfi <= 5) ? 5 : mfi; @@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, return temp; } -static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, +static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { + u32 dp_op, dp_mfd, dp_mfn, dp_ctl; + void __iomem *pllbase; struct clk_pllv2 *pll = to_clk_pllv2(hw); + + pllbase = pll->base; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + + return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn); +} + +static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate, + u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn) +{ u32 reg; - void __iomem *pllbase; long mfi, pdf, mfn, mfd = 999999; s64 temp64; unsigned long quad_parent_rate; - unsigned long pll_hfsm, dp_ctl; - - pllbase = pll->base; quad_parent_rate = 4 * parent_rate; pdf = mfi = -1; @@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; pdf--; - temp64 = rate * (pdf+1) - quad_parent_rate * mfi; - do_div(temp64, quad_parent_rate/1000000); + temp64 = rate * (pdf + 1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate / 1000000); mfn = (long)temp64; + reg = mfi << 4 | pdf; + + *dp_op = reg; + *dp_mfd = mfd; + *dp_mfn = mfn; + + return 0; +} + +static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pllv2 *pll = to_clk_pllv2(hw); + void __iomem *pllbase; + u32 dp_ctl, dp_op, dp_mfd, dp_mfn; + int ret; + + pllbase = pll->base; + + + ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn); + if (ret) + return ret; + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); /* use dpdck0_2 */ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); - } else { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); - } + + __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP); + __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN); return 0; } @@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - return rate; + u32 dp_op, dp_mfd, dp_mfn; + + __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn); + return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN, + dp_op, dp_mfd, dp_mfn); } static int clk_pllv2_prepare(struct clk_hw *hw) diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee2..5e3f1f0f4cab 100644 --- a/arch/arm/mach-imx/crm-regs-imx5.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h @@ -23,7 +23,7 @@ #define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR) #define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR) #define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) -#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) +#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR) /* PLL Register Offsets */ #define MXC_PLL_DP_CTL 0x00 diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 89493abd497c..20ed2d56c1af 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -12,6 +12,7 @@ #include <linux/errno.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <mach/common.h> int platform_cpu_kill(unsigned int cpu) @@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu) return 1; } +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + /* * platform-specific code to shutdown a CPU * @@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu) */ void platform_cpu_die(unsigned int cpu) { - flush_cache_all(); + cpu_enter_lowpower(); imx_enable_cpu(cpu, false); cpu_do_idle(); + cpu_leave_lowpower(); /* We should never return from idle */ panic("cpu %d unexpectedly exit from shutdown\n", cpu); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index c515f8ede1a1..6450303f1a7a 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", .platform_data = &tsc2007_info, .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index ac50f1671e38..1e09de50cbcd 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x49), - .type = "tsc2007", .platform_data = &tsc2007_info, }, }; diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index dff82eb57cd9..f76edb96a48a 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = { PB23_PF_USB_PWR, PB24_PF_USB_OC, /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, PB10_PF_CSI_D0, PB11_PF_CSI_D1, PB12_PF_CSI_D2, @@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = { { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, }; +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, +}; + /* Camera */ static int visstrim_camera_power(struct device *dev, int on) { @@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void) struct platform_device *pdev; int dma; - /* Initialize tvp5150 gpios */ - mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); - gpio_set_value(TVP5150_RSTN, 1); - gpio_set_value(TVP5150_PWDN, 0); - ndelay(1); - gpio_set_value(TVP5150_PWDN, 1); ndelay(1); gpio_set_value(TVP5150_RSTN, 0); @@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { /* USB OTG */ static int otg_phy_init(struct platform_device *pdev) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - - mdelay(10); - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } @@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d14bbe949a4f..3e7401fca76c 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -32,7 +32,7 @@ * Memory-mapped I/O on MX21ADS base board */ #define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE SZ_16M +#define MX21ADS_MMIO_SIZE 0xc00000 #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 967ed5b35a45..a8983b9778d1 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, void __init imx3_init_l2x0(void) { +#ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; void __iomem *clkctl_base; @@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void) } l2x0_init(l2x0_base, 0x00030024, 0x00000000); +#endif } #ifdef CONFIG_SOC_IMX31 @@ -179,6 +181,8 @@ void __init imx31_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + pinctrl_provide_dummies(); + if (to_version == 1) { strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", strlen(imx31_sdma_pdata.fw_name)); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index feeee17da96b..1d003053d562 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -202,6 +202,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + pinctrl_provide_dummies(); + /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c5739519..b0d3cc49269d 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 25fb3fd418ef..e1d2c6def5e6 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -193,9 +193,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, bit_idx, 0, &gating_lock, fn); } +static struct clk *ge0, *ge1; + void __init kirkwood_clk_init(void) { - struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio; + struct clk *runit, *sata0, *sata1, *usb0, *sdio; struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, @@ -257,6 +259,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR); + /* The interface forgets the MAC address assigned by u-boot if + the clock is turned off, so claim the clk now. */ + clk_prepare_enable(ge0); } @@ -268,6 +273,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR); + clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index fcfe0e3bd701..e60c7d98922b 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq.c @@ -241,6 +241,7 @@ void __init mmp2_init_icu(void) icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; icu_data[1].nr_irqs = 2; + icu_data[1].cascade_irq = 4; icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, icu_data[1].virq_base, 0, @@ -249,6 +250,7 @@ void __init mmp2_init_icu(void) icu_data[2].reg_status = mmp_icu_base + 0x154; icu_data[2].reg_mask = mmp_icu_base + 0x16c; icu_data[2].nr_irqs = 2; + icu_data[2].cascade_irq = 5; icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, icu_data[2].virq_base, 0, @@ -257,6 +259,7 @@ void __init mmp2_init_icu(void) icu_data[3].reg_status = mmp_icu_base + 0x180; icu_data[3].reg_mask = mmp_icu_base + 0x17c; icu_data[3].nr_irqs = 3; + icu_data[3].cascade_irq = 9; icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, icu_data[3].virq_base, 0, @@ -265,6 +268,7 @@ void __init mmp2_init_icu(void) icu_data[4].reg_status = mmp_icu_base + 0x158; icu_data[4].reg_mask = mmp_icu_base + 0x170; icu_data[4].nr_irqs = 5; + icu_data[4].cascade_irq = 17; icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, icu_data[4].virq_base, 0, @@ -273,6 +277,7 @@ void __init mmp2_init_icu(void) icu_data[5].reg_status = mmp_icu_base + 0x15c; icu_data[5].reg_mask = mmp_icu_base + 0x174; icu_data[5].nr_irqs = 15; + icu_data[5].cascade_irq = 35; icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, icu_data[5].virq_base, 0, @@ -281,6 +286,7 @@ void __init mmp2_init_icu(void) icu_data[6].reg_status = mmp_icu_base + 0x160; icu_data[6].reg_mask = mmp_icu_base + 0x178; icu_data[6].nr_irqs = 2; + icu_data[6].cascade_irq = 51; icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, icu_data[6].virq_base, 0, @@ -289,6 +295,7 @@ void __init mmp2_init_icu(void) icu_data[7].reg_status = mmp_icu_base + 0x188; icu_data[7].reg_mask = mmp_icu_base + 0x184; icu_data[7].nr_irqs = 2; + icu_data[7].cascade_irq = 55; icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, icu_data[7].virq_base, 0, diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e88a31a..2c5d0ed75285 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909eeb78..580fd17208da 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53deccecab..df2534de3361 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4e1a3b0e8cc8..1efdec236ae8 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f146fe..88ffa1e645cd 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,9 @@ #include <linux/module.h> #include <linux/platform_device.h> + +#include <asm/memblock.h> + #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b3264abe..00486a8564fd 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303be563..6038a8c84b74 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index d3ef99c5cad8..9fe6829f4c16 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -218,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060a0b75..471e62a74a16 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f9ee5b..acc216491b8a 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477e6f82..d52651a05daa 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d0ca7c..3a595e899724 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce765407ad5..21cb74003a56 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/irq.h> #include "common.h" #include <plat/cpu.h> @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aaca068..c1b93c752d70 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b43c12e..c4a576856661 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46ce7fd..805bea6edf17 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 4d6a2ee99c3b..5beb7ebe2948 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -33,7 +33,7 @@ static bool is_enabled; -static void tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_enable(void) { void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cf4687ee2a7b..cd8ea3588f93 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, -#if 0 - { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = SZ_16M, - .type = MT_DEVICE }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), - .length = SZ_16M, + .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), + .length = IO_SPACE_LIMIT, .type = MT_DEVICE }, #endif -#endif }; void __init versatile_map_io(void) diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 4d4973dd8fba..408e58da46c6 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,8 +29,9 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul +#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE -/* macro to get at IO space when running virtually */ +/* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h new file mode 100644 index 000000000000..0406513be7d8 --- /dev/null +++ b/arch/arm/mach-versatile/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-versatile/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define PCIO_BASE 0xeb000000ul + +#define __io(a) ((a) + PCIO_BASE) + +#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 15c6a00000ec..bec933b04ef0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; +static struct resource io_port = { + .name = "PCI", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct resource non_mem = { @@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } + ret = request_resource(&ioport_resource, &io_port); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "port region (%d)\n", ret); + goto out; + } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; + sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index 9129c9e7d532..88726f4dbbfa 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -50,6 +50,7 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <asm/mach/time.h> @@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk) return 0; } -void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init epit_timer_init(void __iomem *base, int irq) { + struct clk *timer_clk; + + timer_clk = clk_get_sys("imx-epit.0", NULL); + if (IS_ERR(timer_clk)) { + pr_err("i.MX epit: unable to get clk\n"); + return; + } + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index cf663d84e7c1..e429ca1b814a 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -54,8 +54,8 @@ extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx53_soc_init(void); extern void imx51_init_late(void); -extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); -extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); +extern void epit_timer_init(void __iomem *base, int irq); +extern void mxc_timer_init(void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); extern int mx25_clocks_init(void); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 99f958ca6cb8..00e8e659e667 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -58,6 +58,7 @@ /* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_CLK_PER (2 << 6) #define V2_TCTL_FRR (1 << 9) #define V2_IR 0x0c #define V2_TSTAT 0x08 @@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) return 0; } -void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init mxc_timer_init(void __iomem *base, int irq) { uint32_t tctl_val; + struct clk *timer_clk; struct clk *timer_ipg_clk; - if (!timer_clk) { - timer_clk = clk_get_sys("imx-gpt.0", "per"); - if (IS_ERR(timer_clk)) { - pr_err("i.MX timer: unable to get clk\n"); - return; - } - - timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); - if (!IS_ERR(timer_ipg_clk)) - clk_prepare_enable(timer_ipg_clk); + timer_clk = clk_get_sys("imx-gpt.0", "per"); + if (IS_ERR(timer_clk)) { + pr_err("i.MX timer: unable to get clk\n"); + return; } + timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); + if (!IS_ERR(timer_ipg_clk)) + clk_prepare_enable(timer_ipg_clk); + clk_prepare_enable(timer_clk); timer_base = base; @@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 297245dba66e..de6c0a08f461 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap3505(): True for OMAP3505 - * cpu_is_omap3517(): True for OMAP3517 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3517) -IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 -#define cpu_is_omap3503() 0 -#define cpu_is_omap3515() 0 -#define cpu_is_omap3525() 0 -#define cpu_is_omap3530() 0 -#define cpu_is_omap3505() 0 -#define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 @@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517) #if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap3430 -# undef cpu_is_omap3503 -# undef cpu_is_omap3515 -# undef cpu_is_omap3525 -# undef cpu_is_omap3530 -# undef cpu_is_omap3505 -# undef cpu_is_omap3517 # undef cpu_is_ti81xx # undef cpu_is_ti816x # undef cpu_is_ti814x @@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_am33xx # undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() -# define cpu_is_omap3503() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (!omap3_has_sgx())) -# define cpu_is_omap3515() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (omap3_has_sgx())) -# define cpu_is_omap3525() (cpu_is_omap3430() && \ - (!omap3_has_sgx()) && \ - (omap3_has_iva())) -# define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3517() is_omap3517() -# define cpu_is_omap3505() (cpu_is_omap3517() && \ - !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti81xx() is_ti81xx() @@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) #define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP3517_CLASS 0x35170034 -#define OMAP3517_REV_ES1_0 OMAP3517_CLASS -#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) - #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7754a886d42..5493bd95da5e 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -172,8 +172,7 @@ struct omap_mmc_platform_data { extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); @@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } - #endif extern int omap_msdi_reset(struct omap_hwmod *oh); |