diff options
Diffstat (limited to 'arch')
274 files changed, 6524 insertions, 3999 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 860bea828ac4..201f5e105484 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -377,7 +377,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select IRQ_DOMAIN - select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD select PINCTRL select PINCTRL_AT91 if USE_OF @@ -756,7 +755,7 @@ config ARCH_S3C64XX select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM - select COMMON_CLK + select COMMON_CLK_SAMSUNG select CPU_V6K select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG @@ -830,25 +829,6 @@ config ARCH_S5PV210 help Samsung S5PV210/S5PC110 series based systems -config ARCH_EXYNOS - bool "Samsung EXYNOS" - select ARCH_HAS_CPUFREQ - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB - select ARCH_SPARSEMEM_ENABLE - select ARM_GIC - select COMMON_CLK - select CPU_V7 - select GENERIC_CLOCKEVENTS - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_MEMORY_H - select SPARSE_IRQ - select USE_OF - help - Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -952,6 +932,8 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" +source "arch/arm/mach-axxia/Kconfig" + source "arch/arm/mach-bcm/Kconfig" source "arch/arm/mach-berlin/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 4678870f8ee8..8f90595069a1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -317,6 +317,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SL. + config DEBUG_IMX6SX_UART + bool "i.MX6SX Debug UART" + depends on SOC_IMX6SX + help + Say Y here if you want kernel low-level debugging support + on i.MX6SX. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -349,56 +356,40 @@ choice Say Y here if you want kernel low-level debugging support on MMP UART3. - config DEBUG_MSM_UART1 - bool "Kernel low-level debugging messages via MSM UART1" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART + config DEBUG_MSM_UART + bool "Kernel low-level debugging messages via MSM UART" + depends on ARCH_MSM help Say Y here if you want the debug print routines to direct - their output to the first serial port on MSM devices. + their output to the serial port on MSM devices. - config DEBUG_MSM_UART2 - bool "Kernel low-level debugging messages via MSM UART2" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the second serial port on MSM devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE # + MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1 + MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2 + MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3 - config DEBUG_MSM_UART3 - bool "Kernel low-level debugging messages via MSM UART3" - depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the third serial port on MSM devices. + MSM7X30 0xaca00000 0xe1000000 UART1 + MSM7X30 0xacb00000 0xe1000000 UART2 + MSM7X30 0xacc00000 0xe1000000 UART3 - config DEBUG_MSM8660_UART - bool "Kernel low-level debugging messages via MSM 8660 UART" - depends on ARCH_MSM8X60 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8660 devices. + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. - config DEBUG_MSM8960_UART - bool "Kernel low-level debugging messages via MSM 8960 UART" - depends on ARCH_MSM8960 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART + config DEBUG_QCOM_UARTDM + bool "Kernel low-level debugging messages via QCOM UARTDM" + depends on ARCH_QCOM help Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8960 devices. + their output to the serial port on Qualcomm devices. - config DEBUG_MSM8974_UART - bool "Kernel low-level debugging messages via MSM 8974 UART" - depends on ARCH_MSM8974 - select MSM_HAS_DEBUG_UART_HS - select DEBUG_MSM_UART - help - Say Y here if you want the debug print routines to direct - their output to the serial port on MSM 8974 devices. + ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + APQ8084 0xf995e000 0xfa75e000 + MSM8X60 0x19c40000 0xf0040000 + MSM8960 0x16440000 0xf0040000 + MSM8974 0xf991e000 0xfa71e000 + + Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration + options based on your needs. config DEBUG_MVEBU_UART bool "Kernel low-level debugging messages via MVEBU UART (old bootloaders)" @@ -972,13 +963,23 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX51_UART || \ DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART default 1 depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. +config DEBUG_VF_UART_PORT + int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART + default 1 + range 0 3 + depends on SOC_VF610 + help + Choose UART port on which kernel low-level debug messages + should be output. + config DEBUG_TEGRA_UART bool depends on ARCH_TEGRA @@ -987,10 +988,6 @@ config DEBUG_STI_UART bool depends on ARCH_STI -config DEBUG_MSM_UART - bool - depends on ARCH_MSM || ARCH_QCOM - config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 @@ -1007,8 +1004,9 @@ config DEBUG_LL_INCLUDE DEBUG_IMX51_UART || \ DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ - DEBUG_IMX6SL_UART - default "debug/msm.S" if DEBUG_MSM_UART + DEBUG_IMX6SL_UART || \ + DEBUG_IMX6SX_UART + default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 @@ -1079,6 +1077,7 @@ config DEBUG_UART_PHYS default 0x80230000 if DEBUG_PICOXCELL_UART default 0x808c0000 if ARCH_EP93XX default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART + default 0xa9a00000 if DEBUG_MSM_UART default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX default 0xc0013000 if DEBUG_U300_UART default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN @@ -1094,6 +1093,7 @@ config DEBUG_UART_PHYS ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X default 0xffc02000 if DEBUG_SOCFPGA_UART @@ -1102,11 +1102,13 @@ config DEBUG_UART_PHYS default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_VIRT hex "Virtual base address of debug UART" default 0xe0010fe0 if ARCH_RPC + default 0xe1000000 if DEBUG_MSM_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf0009000 if DEBUG_CNS3XXX default 0xf01fb000 if DEBUG_NOMADIK_UART @@ -1128,6 +1130,7 @@ config DEBUG_UART_VIRT default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX @@ -1166,7 +1169,8 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_S3C24XX_UART + DEBUG_UART_8250 || DEBUG_UART_PL01X || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 41c1931f0155..6721fab13734 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -138,10 +138,12 @@ endif textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 +textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_AXXIA) += axxia machine-$(CONFIG_ARCH_BCM) += bcm machine-$(CONFIG_ARCH_BERLIN) += berlin machine-$(CONFIG_ARCH_CLPS711X) += clps711x diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 377b7c364033..ff7a04b68d88 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -50,6 +50,7 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb +dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \ @@ -73,6 +74,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ exynos5420-arndale-octa.dtb \ + exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb @@ -289,7 +291,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am43x-epos-evm.dtb \ am437x-gp-evm.dtb \ dra7-evm.dtb -dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \ + orion5x-lacie-ethernet-disk-mini-v2.dtb \ + orion5x-maxtor-shared-storage-2.dtb \ + orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ @@ -297,8 +302,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \ dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb -dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \ - r7s72100-genmai.dtb \ +dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r7s72100-genmai-reference.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts index a542d5837a17..27ebb0f722fd 100644 --- a/arch/arm/boot/dts/at91-cosino_mega2560.dts +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -32,11 +32,6 @@ status = "okay"; }; - - tsadcc: tsadcc@f804c000 { - status = "okay"; - }; - rtc@fffffeb0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 4537259ce529..099111bd4221 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,6 +21,14 @@ reg = <0x20000000 0x10000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { mmc0: mmc@f0000000 { diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 3be973e9889a..80cdcecf0332 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -45,6 +45,18 @@ reg = <0x20000000 0x08000000>; }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -524,17 +536,24 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { + slow_rc_osc: slow_rc_osc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_xtal>; }; main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 2ce527e70c7a..c6683ea8b743 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,6 +20,10 @@ reg = <0x20000000 0x4000000>; }; + main_xtal { + clock-frequency = <18432000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 92a52faebef7..ae9c39a28c63 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -48,6 +48,18 @@ reg = <0x20000000 0x04000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -548,17 +560,11 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - main: mainck { compatible = "atmel,at91rm9200-clk-main"; #clock-cells = <0>; interrupts-extended = <&pmc AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; }; plla: pllack { @@ -769,6 +775,32 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + sckc@fffffd50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffd50 0x4>; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <1200000>; + clocks = <&slow_xtal>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + atmel,startup-time-usec = <75>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index cddb37825fad..b3b89baf972e 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,6 +20,15 @@ reg = <0x20000000 0x4000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + clocks { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts new file mode 100644 index 000000000000..a9d60471d9ff --- /dev/null +++ b/arch/arm/boot/dts/axm5516-amarillo.dts @@ -0,0 +1,51 @@ +/* + * arch/arm/boot/dts/axm5516-amarillo.dts + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; + +/memreserve/ 0x00000000 0x00400000; + +#include "axm55xx.dtsi" +#include "axm5516-cpus.dtsi" + +/ { + model = "Amarillo AXM5516"; + compatible = "lsi,axm5516-amarillo", "lsi,axm5516"; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0x02 0x00000000>; + }; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&serial2 { + status = "okay"; +}; + +&serial3 { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi new file mode 100644 index 000000000000..b85f360cb125 --- /dev/null +++ b/arch/arm/boot/dts/axm5516-cpus.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm5516-cpus.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + cluster2 { + core0 { + cpu = <&CPU8>; + }; + core1 { + cpu = <&CPU9>; + }; + core2 { + cpu = <&CPU10>; + }; + core3 { + cpu = <&CPU11>; + }; + }; + cluster3 { + core0 { + cpu = <&CPU12>; + }; + core1 { + cpu = <&CPU13>; + }; + core2 { + cpu = <&CPU14>; + }; + core3 { + cpu = <&CPU15>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x00>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x01>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x02>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x03>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x102>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x103>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU8: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x200>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU9: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x201>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU10: cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x202>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU11: cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x203>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU12: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x300>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU13: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x301>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU14: cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x302>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + + CPU15: cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x303>; + clock-frequency= <1400000000>; + cpu-release-addr = <0>; // Fixed by the boot loader + }; + }; +}; diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi new file mode 100644 index 000000000000..ea288f0a1d39 --- /dev/null +++ b/arch/arm/boot/dts/axm55xx.dtsi @@ -0,0 +1,204 @@ +/* + * arch/arm/boot/dts/axm55xx.dtsi + * + * Copyright (C) 2013 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/lsi,axm5516-clks.h> + +#include "skeleton64.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + timer = &timer0; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clk_ref0: clk_ref0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref1: clk_ref1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clk_ref2: clk_ref2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + clks: clock-controller@2010020000 { + compatible = "lsi,axm5516-clks"; + #clock-cells = <1>; + reg = <0x20 0x10020000 0 0x20000>; + }; + }; + + gic: interrupt-controller@2001001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x20 0x01001000 0 0x1000>, + <0x20 0x01002000 0 0x1000>, + <0x20 0x01004000 0 0x2000>, + <0x20 0x01006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = + <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + device_type = "soc"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + ranges; + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + serial0: uart@2010080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10080000 0 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial1: uart@2010081000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10081000 0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial2: uart@2010082000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10082000 0 0x1000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + serial3: uart@2010083000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x20 0x10083000 0 0x1000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + timer0: timer@2010091000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x20 0x10091000 0 0x1000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "okay"; + }; + + gpio0: gpio@2010092000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10092000 0x00 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + gpio1: gpio@2010093000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0x20 0x10093000 0x00 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks AXXIA_CLK_PER>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + }; +}; + +/* + Local Variables: + mode: C + End: +*/ diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 2f8bcd068d17..58ff8e28c74f 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -129,12 +129,10 @@ status = "disabled"; #address-cells = <1>; #size-cells = <1>; + #clock-cells = <1>; + clock-output-names = "cam_a_clkout", "cam_b_clkout"; ranges; - clock_cam: clock-controller { - #clock-cells = <1>; - }; - fimc_0: fimc@11800000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; @@ -371,6 +369,8 @@ interrupts = <0 60 0>; clocks = <&clock CLK_I2C2>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; status = "disabled"; }; @@ -382,6 +382,8 @@ interrupts = <0 61 0>; clocks = <&clock CLK_I2C3>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; status = "disabled"; }; @@ -393,6 +395,8 @@ interrupts = <0 62 0>; clocks = <&clock CLK_I2C4>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; status = "disabled"; }; @@ -404,6 +408,8 @@ interrupts = <0 63 0>; clocks = <&clock CLK_I2C5>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; status = "disabled"; }; @@ -415,6 +421,8 @@ interrupts = <0 64 0>; clocks = <&clock CLK_I2C6>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; status = "disabled"; }; @@ -426,6 +434,8 @@ interrupts = <0 65 0>; clocks = <&clock CLK_I2C7>; clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 63e34b24b04f..9296dee10e26 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,21 @@ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; }; + sysram@02020000 { + smp-sysram@0 { + status = "disabled"; + }; + + smp-sysram@5000 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x5000 0x1000>; + }; + + smp-sysram@1f000 { + status = "disabled"; + }; + }; + mct@10050000 { compatible = "none"; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index cacf6140dd2f..ee3001f38821 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,24 @@ pinctrl2 = &pinctrl_2; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x20000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@1f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x1f000 0x1000>; + }; + }; + pd_lcd1: lcd1-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 8a558b7ac999..bc08e6ef3d4f 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -20,7 +20,7 @@ compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; aliases { - i2c8 = &i2c_ak8975; + i2c9 = &i2c_ak8975; }; memory { @@ -80,7 +80,24 @@ enable-active-high; }; - /* More to come */ + cam_af_reg: voltage-regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "CAM_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpm0 4 0>; + enable-active-high; + }; + + cam_isp_core_reg: voltage-regulator-4 { + compatible = "regulator-fixed"; + regulator-name = "CAM_ISP_CORE_1.2V_EN"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpm0 3 0>; + enable-active-high; + regulator-always-on; + }; }; gpio-keys { @@ -140,6 +157,38 @@ }; }; + i2c_0: i2c@13860000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; + i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; @@ -586,8 +635,8 @@ status = "okay"; }; - camera { - pinctrl-0 = <&cam_port_b_clk_active>; + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; @@ -607,6 +656,23 @@ status = "okay"; }; + csis_0: csis@11880000 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + clock-frequency = <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; + }; + csis_1: csis@11890000 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; @@ -647,10 +713,11 @@ reg = <0x10>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; clock-frequency = <24000000>; /* CAM_B_CLKOUT */ - clocks = <&clock_cam 1>; - clock-names = "mclk"; + clocks = <&camera 1>; + clock-names = "extclk"; samsung,camclk-out = <1>; gpios = <&gpm1 6 0>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index c4a9306f8529..70e3765b51ee 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -37,6 +37,24 @@ interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x40000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_isp: isp-power-domain@10023CA0 { compatible = "samsung,exynos4210-pd"; reg = <0x10023CA0 0x20>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 37423314a028..e44693e2cfda 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -72,6 +72,24 @@ }; }; + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; + }; + pd_gsc: gsc-power-domain@10044000 { compatible = "samsung,exynos4210-pd"; reg = <0x10044000 0x20>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts new file mode 100644 index 000000000000..fae33dddac39 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -0,0 +1,147 @@ +/* + * Google Peach Pit Rev 6+ board device tree source + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "exynos5420.dtsi" + +/ { + model = "Google Peach Pit Rev 6+"; + + compatible = "google,pit-rev16", + "google,pit-rev15", "google,pit-rev14", + "google,pit-rev13", "google,pit-rev12", + "google,pit-rev11", "google,pit-rev10", + "google,pit-rev9", "google,pit-rev8", + "google,pit-rev7", "google,pit-rev6", + "google,pit", "google,peach","samsung,exynos5420", + "samsung,exynos5"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq>; + + power { + label = "Power"; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; +}; + +&pinctrl_0 { + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&uart_3 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + caps2-mmc-hs200-1_8v; + supports-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + supports-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; + }; +}; + +/* + * Use longest HW watchdog in SoC (32 seconds) since the hardware + * watchdog provides no debugging information (compared to soft/hard + * lockup detectors) and so should be last resort. + */ +&watchdog { + timeout-sec = <32>; +}; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index e62c8eb57438..ba686e40eac7 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -624,6 +624,34 @@ samsung,pin-drv = <0>; }; + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + i2c7_hs_bus: i2c7-hs-bus { samsung,pins = "gpb2-2", "gpb2-3"; samsung,pin-function = <3>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index b69fbcb7dcb8..5e36449a831c 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -58,6 +58,7 @@ compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu1: cpu@1 { @@ -65,6 +66,7 @@ compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu2: cpu@2 { @@ -72,6 +74,7 @@ compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu3: cpu@3 { @@ -79,6 +82,7 @@ compatible = "arm,cortex-a15"; reg = <0x3>; clock-frequency = <1800000000>; + cci-control-port = <&cci_control1>; }; cpu4: cpu@100 { @@ -86,6 +90,7 @@ compatible = "arm,cortex-a7"; reg = <0x100>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu5: cpu@101 { @@ -93,6 +98,7 @@ compatible = "arm,cortex-a7"; reg = <0x101>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu6: cpu@102 { @@ -100,6 +106,7 @@ compatible = "arm,cortex-a7"; reg = <0x102>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; }; cpu7: cpu@103 { @@ -107,6 +114,44 @@ compatible = "arm,cortex-a7"; reg = <0x103>; clock-frequency = <1000000000>; + cci-control-port = <&cci_control0>; + }; + }; + + cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; }; }; @@ -125,7 +170,7 @@ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; }; - codec@11000000 { + mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; interrupts = <0 96 0>; @@ -169,7 +214,7 @@ status = "disabled"; }; - mct@101C0000 { + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; @@ -260,7 +305,7 @@ interrupts = <0 47 0>; }; - rtc@101E0000 { + rtc: rtc@101E0000 { clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -427,22 +472,22 @@ status = "disabled"; }; - serial@12C00000 { + uart_0: serial@12C00000 { clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C10000 { + uart_1: serial@12C10000 { clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C20000 { + uart_2: serial@12C20000 { clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; - serial@12C30000 { + uart_3: serial@12C30000 { clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; }; @@ -462,14 +507,14 @@ #phy-cells = <0>; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { clocks = <&clock CLK_DP1>; clock-names = "dp"; phys = <&dp_phy>; phy-names = "dp"; }; - fimd@14400000 { + fimd: fimd@14400000 { samsung,power-domain = <&disp_pd>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; @@ -546,7 +591,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_I2C4>; + clocks = <&clock CLK_USI0>; clock-names = "hsi2c"; status = "disabled"; }; @@ -559,7 +604,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_I2C5>; + clocks = <&clock CLK_USI1>; clock-names = "hsi2c"; status = "disabled"; }; @@ -572,7 +617,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_I2C6>; + clocks = <&clock CLK_USI2>; clock-names = "hsi2c"; status = "disabled"; }; @@ -585,7 +630,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_I2C7>; + clocks = <&clock CLK_USI3>; clock-names = "hsi2c"; status = "disabled"; }; @@ -598,7 +643,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_I2C8>; + clocks = <&clock CLK_USI4>; clock-names = "hsi2c"; status = "disabled"; }; @@ -611,7 +656,7 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_I2C9>; + clocks = <&clock CLK_USI5>; clock-names = "hsi2c"; status = "disabled"; }; @@ -624,12 +669,12 @@ #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_I2C10>; + clocks = <&clock CLK_USI6>; clock-names = "hsi2c"; status = "disabled"; }; - hdmi@14530000 { + hdmi: hdmi@14530000 { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; interrupts = <0 95 0>; @@ -641,7 +686,7 @@ status = "disabled"; }; - mixer@14450000 { + mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; interrupts = <0 94 0>; @@ -712,7 +757,7 @@ clock-names = "tmu_apbif", "tmu_triminfo_apbif"; }; - watchdog@101D0000 { + watchdog: watchdog@101D0000 { compatible = "samsung,exynos5420-wdt"; reg = <0x101D0000 0x100>; interrupts = <0 42 0>; @@ -721,7 +766,7 @@ samsung,syscon-phandle = <&pmu_system_controller>; }; - sss@10830000 { + sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x10000>; interrupts = <0 112 0>; diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts index 4df68ad3736a..9cba94bed7ad 100644 --- a/arch/arm/boot/dts/omap3-evm-37xx.dts +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -89,7 +89,16 @@ status = "disabled"; }; +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +&uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; +}; + &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index 0abe986a4ecc..476ff158ddb3 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -234,6 +234,10 @@ }; }; +&uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; +}; + &usb_otg_hs { pinctrl-names = "default"; pinctrl-0 = <&musb_pins>; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 1a57b61f5e24..150ca097c02d 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -21,6 +21,17 @@ }; }; + leds { + compatible = "gpio-leds"; + heartbeat { + label = "debug::sleep"; + gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* gpio162 */ + linux,default-trigger = "default-on"; + pinctrl-names = "default"; + pinctrl-0 = <&debug_leds>; + }; + }; + memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ @@ -130,6 +141,12 @@ >; }; + debug_leds: pinmux_debug_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */ + >; + }; + mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */ @@ -618,11 +635,13 @@ }; &uart2 { + interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 4231191ade06..3cc092b7cce7 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -267,7 +267,7 @@ uart1: serial@4806a000 { compatible = "ti,omap3-uart"; reg = <0x4806a000 0x2000>; - interrupts = <72>; + interrupts-extended = <&intc 72>; dmas = <&sdma 49 &sdma 50>; dma-names = "tx", "rx"; ti,hwmods = "uart1"; @@ -277,7 +277,7 @@ uart2: serial@4806c000 { compatible = "ti,omap3-uart"; reg = <0x4806c000 0x400>; - interrupts = <73>; + interrupts-extended = <&intc 73>; dmas = <&sdma 51 &sdma 52>; dma-names = "tx", "rx"; ti,hwmods = "uart2"; @@ -287,7 +287,7 @@ uart3: serial@49020000 { compatible = "ti,omap3-uart"; reg = <0x49020000 0x400>; - interrupts = <74>; + interrupts-extended = <&intc 74>; dmas = <&sdma 53 &sdma 54>; dma-names = "tx", "rx"; ti,hwmods = "uart3"; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index d2c45bfaaa2c..8cfa3c8a72b0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -481,6 +481,21 @@ usb-supply = <&vusb>; }; +&uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; +}; + +&uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; +}; + +&uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; +}; + &usb_otg_hs { interface-type = <1>; mode = <3>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 48983c8d56c2..3e1da43068f6 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -570,16 +570,22 @@ }; &uart2 { + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART2_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; }; &uart3 { + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART3_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; }; &uart4 { + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core OMAP4_UART4_RX>; pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 649b5cd38b40..b22664544a09 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -311,7 +311,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; @@ -319,7 +319,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; @@ -327,7 +327,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; diff --git a/arch/arm/boot/dts/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts new file mode 100644 index 000000000000..c701e8d16bbb --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-d2-network.dts @@ -0,0 +1,236 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "LaCie d2 Network"; + compatible = "lacie,d2-network", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + front_button { + label = "Front Push Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_on { + label = "Power rocker switch (on|auto)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + power_rocker_sw_off { + label = "Power rocker switch (auto|off)"; + linux,input-type = <5>; /* EV_SW */ + linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_sata0_power &pmx_sata1_power>; + pinctrl-names = "default"; + + sata0_power: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + sata1_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372b"; + reg = <0x32>; + }; + + fan@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + + /* Not enough HW info */ + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_board_id &pmx_fan_fail>; + pinctrl-names = "default"; + + pmx_board_id: pmx-board-id { + marvell,pins = "mpp0", "mpp1", "mpp2"; + marvell,function = "gpio"; + }; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp8", "mpp9", "mpp18"; + marvell,function = "gpio"; + }; + + pmx_fan_fail: pmx-fan-fail { + marvell,pins = "mpp5"; + marvell,function = "gpio"; + }; + + /* + * MPP6: Red front LED + * MPP16: Blue front LED blink control + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp6", "mpp16"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata0_power: pmx-sata0-power { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + pmx_sata1_power: pmx-sata1-power { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index 5ed6c1376901..89ff404a528c 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -6,8 +6,19 @@ * warranty of any kind, whether express or implied. */ +/* + * TODO: add Orion USB device port init when kernel.org support is added. + * TODO: add flash write support: see below. + * TODO: add power-off support. + * TODO: add I2C EEPROM support. + */ + /dts-v1/; -/include/ "orion5x.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" / { model = "LaCie Ethernet Disk mini V2"; @@ -19,49 +30,84 @@ chosen { bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; }; - ocp@f1000000 { - serial@12000 { - clock-frequency = <166666667>; - status = "okay"; - }; - - sata@80000 { - status = "okay"; - nr-ports = <2>; - }; + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xfff80000 0x80000>; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; + pinctrl-0 = <&pmx_power_button>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; button@1 { label = "Power-on Switch"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio0 18 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led>; + pinctrl-names = "default"; led@1 { label = "power:blue"; - gpios = <&gpio0 16 1>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; -&mdio { +&devbus_bootcs { status = "okay"; - ethphy: ethernet-phy { - reg = <8>; + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Full512Kb"; + reg = <0 0x80000>; + read-only; + }; }; }; +&ehci0 { + status = "okay"; +}; + ð { status = "okay"; @@ -69,3 +115,60 @@ phy-handle = <ðphy>; }; }; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_rtc &pmx_power_led_ctrl>; + pinctrl-names = "default"; + + pmx_power_button: pmx-power-button { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_power_led_ctrl: pmx-power-led-ctrl { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts new file mode 100644 index 000000000000..ff3484904294 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-maxtor-shared-storage-2.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * Copyright (C) Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Maxtor Shared Storage II"; + compatible = "maxtor,shared-storage-2", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xff800000 0x40000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_buttons>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + /* + * Currently the MTD code does not recognize the MX29LV400CBCT + * as a bottom-type device. This could cause risks of + * accidentally erasing critical flash sectors. We thus define + * a single, write-protected partition covering the whole + * flash. TODO: once the flash part TOP/BOTTOM detection + * issue is sorted out in the MTD code, break this into at + * least three partitions: 'u-boot code', 'u-boot environment' + * and 'whatever is left'. + */ + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x40000>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_leds &pmx_misc>; + pinctrl-names = "default"; + + pmx_buttons: pmx-buttons { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + + /* + * MPP0: Power LED + * MPP1: Error LED + */ + pmx_leds: pmx-leds { + marvell,pins = "mpp0", "mpp1"; + marvell,function = "gpio"; + }; + + /* + * MPP4: HDD ind. (Single/Dual) + * MPP5: HD0 5V control + * MPP6: HD0 12V control + * MPP7: HD1 5V control + * MPP8: HD1 12V control + */ + pmx_misc: pmx-misc { + marvell,pins = "mpp4", "mpp5", "mpp6", "mpp7", "mpp8", "mpp10"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_sata0_led_active: pmx-sata0-led-active { + marvell,pins = "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1_led_active: pmx-sata1-led-active { + marvell,pins = "mpp15"; + marvell,function = "sata1"; + }; + + /* + * Non MPP GPIOs: + * GPIO 22: USB port 1 fuse (0 = Fail, 1 = Ok) + * GPIO 23: Blue front LED off + * GPIO 24: Inhibit board power off (0 = Disabled, 1 = Enabled) + */ +}; + +&sata { + pinctrl-0 = <&pmx_sata0_led_active + &pmx_sata1_led_active>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x-mv88f5182.dtsi b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi new file mode 100644 index 000000000000..d1ed71c60209 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-mv88f5182.dtsi @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include "orion5x.dtsi" + +/ { + compatible = "marvell,orion5x-88f5182", "marvell,orion5x"; + + soc { + compatible = "marvell,orion5x-88f5182-mbus", "simple-bus"; + + internal-regs { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f5182-pinctrl"; + reg = <0x10000 0x8>, <0x10050 0x4>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp12", "mpp14"; + marvell,function = "sata0"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp13", "mpp15"; + marvell,function = "sata1"; + }; + }; + + core_clk: core-clocks@10030 { + compatible = "marvell,mv88f5182-core-clock"; + reg = <0x10010 0x4>; + #clock-cells = <1>; + }; + + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x1500 0x20>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts new file mode 100644 index 000000000000..6fb052507b36 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "orion5x-mv88f5182.dtsi" + +/ { + model = "Marvell Reference Design 88F5182 NAS"; + compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + linux,stdout-path = &uart0; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>, + <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_debug_led>; + pinctrl-names = "default"; + + led@0 { + label = "rd88f5182:cpu"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x80000>; + bank-width = <1>; + }; +}; + +&devbus_cs1 { + status = "okay"; + + /* Read parameters */ + devbus,bus-width = <8>; + devbus,turn-off-ps = <90000>; + devbus,badr-skew-ps = <0>; + devbus,acc-first-ps = <186000>; + devbus,acc-next-ps = <186000>; + + /* Write parameters */ + devbus,wr-high-ps = <90000>; + devbus,wr-low-ps = <90000>; + devbus,ale-wr-ps = <90000>; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x1000000>; + bank-width = <1>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + phy-handle = <ðphy>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + + rtc@68 { + pinctrl-0 = <&pmx_rtc>; + pinctrl-names = "default"; + compatible = "dallas,ds1338"; + reg = <0x68>; + }; +}; + +&mdio { + status = "okay"; + + ethphy: ethernet-phy { + reg = <8>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios + &pmx_pci_gpios>; + pinctrl-names = "default"; + + /* + * MPP[20] PCI Clock to MV88F5182 + * MPP[21] PCI Clock to mini PCI CON11 + * MPP[22] USB 0 over current indication + * MPP[23] USB 1 over current indication + * MPP[24] USB 1 over current enable + * MPP[25] USB 0 over current enable + */ + + pmx_debug_led: pmx-debug_led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_switch: pmx-reset-switch { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_rtc: pmx-rtc { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_misc_gpios: pmx-misc-gpios { + marvell,pins = "mpp4", "mpp5"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp6", "mpp7"; + marvell,function = "gpio"; + }; +}; + +&sata { + pinctrl-0 = <&pmx_sata0 &pmx_sata1>; + pinctrl-names = "default"; + status = "okay"; + nr-ports = <2>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 174d89241f70..75cd01bd6024 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -6,7 +6,9 @@ * warranty of any kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" + +#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { model = "Marvell Orion5x SoC"; @@ -17,149 +19,214 @@ gpio0 = &gpio0; }; - intc: interrupt-controller { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0xf1020200 0x08>; - }; - - ocp@f1000000 { - compatible = "simple-bus"; - ranges = <0x00000000 0xf1000000 0x4000000 - 0xf2200000 0xf2200000 0x0000800>; - #address-cells = <1>; + soc { + #address-cells = <2>; #size-cells = <1>; + controller = <&mbusc>; - gpio0: gpio@10100 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0x10100 0x40>; - ngpios = <32>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <6>, <7>, <8>, <9>; - }; - - spi@10600 { - compatible = "marvell,orion-spi"; + devbus_bootcs: devbus-bootcs { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; + devbus_cs0: devbus-cs0 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12000 { - compatible = "ns16550a"; - reg = <0x12000 0x100>; - reg-shift = <2>; - interrupts = <3>; - /* set clock-frequency in board dts */ + devbus_cs1: devbus-cs1 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - serial@12100 { - compatible = "ns16550a"; - reg = <0x12100 0x100>; - reg-shift = <2>; - interrupts = <4>; - /* set clock-frequency in board dts */ + devbus_cs2: devbus-cs2 { + compatible = "marvell,orion-devbus"; + reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>; + ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&core_clk 0>; status = "disabled"; }; - wdt@20300 { - compatible = "marvell,orion-wdt"; - reg = <0x20300 0x28>; - status = "okay"; - }; + internal-regs { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <6>, <7>, <8>, <9>; + }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <17>; - status = "disabled"; - }; + spi: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; - xor@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - status = "okay"; + i2c: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clocks = <&core_clk 0>; + status = "disabled"; + }; - xor00 { - interrupts = <30>; - dmacap,memcpy; - dmacap,xor; + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + clocks = <&core_clk 0>; + status = "disabled"; }; - xor01 { - interrupts = <31>; - dmacap,memcpy; - dmacap,xor; - dmacap,memset; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + clocks = <&core_clk 0>; + status = "disabled"; }; - }; - eth: ethernet-controller@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <4>; + }; - ethernet-port@0 { - compatible = "marvell,orion-eth-port"; - reg = <0>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - /* set phy-handle property in board file */ + intc: interrupt-controller@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x08>; }; - }; - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; - /* add phy nodes in board file */ - }; + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + interrupt-parent = <&bridge_intc>; + interrupts = <3>; + status = "okay"; + }; - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; + ehci0: ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <17>; + status = "disabled"; + }; + + xor: dma-controller@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + status = "okay"; + + xor00 { + interrupts = <30>; + dmacap,memcpy; + dmacap,xor; + }; + xor01 { + interrupts = <31>; + dmacap,memcpy; + dmacap,xor; + dmacap,memset; + }; + }; + + eth: ethernet-controller@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethport: ethernet-port@0 { + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <21>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + /* set phy-handle property in board file */ + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata: sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + ehci1: ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; + reg = <MBUS_ID(0xf0, 0x01) 0x90000 0x10000>, + <MBUS_ID(0x09, 0x00) 0x0 0x800>; reg-names = "regs", "sram"; interrupts = <28>; status = "okay"; }; - - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; }; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 2551e9438d35..97a9545f5232 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -22,6 +22,7 @@ compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0x0>; + clock-frequency = <800000000>; }; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 618e5b537eaf..10b326bdf831 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -673,7 +673,7 @@ renesas,clock-indices = < R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 - R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 46181708e59c..aa1cba94196c 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -688,7 +688,7 @@ renesas,clock-indices = < R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 - R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S >; clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 4d4dfbb59f4b..90b354db16a0 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index ed9a70af3e3f..2b494ceef6fc 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -24,6 +24,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "rockchip,rk3066-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index a106b0872910..3f260b9cd51f 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,6 +58,18 @@ reg = <0x20000000 0x8000000>; }; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; @@ -749,18 +761,29 @@ #size-cells = <0>; #interrupt-cells = <1>; - clk32k: slck { - compatible = "fixed-clock"; + main_rc_osc: main_rc_osc { + compatible = "atmel,at91sam9x5-clk-main-rc-osc"; #clock-cells = <0>; - clock-frequency = <32768>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCRCS>; + clock-frequency = <12000000>; + clock-accuracy = <50000000>; }; - main: mainck { - compatible = "atmel,at91rm9200-clk-main"; + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; #clock-cells = <0>; interrupt-parent = <&pmc>; interrupts = <AT91_PMC_MOSCS>; - clocks = <&clk32k>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91sam9x5-clk-main"; + #clock-cells = <0>; + interrupt-parent = <&pmc>; + interrupts = <AT91_PMC_MOSCSELS>; + clocks = <&main_rc_osc &main_osc>; }; plla: pllack { @@ -1089,6 +1112,32 @@ status = "disabled"; }; + sckc@fffffe50 { + compatible = "atmel,at91sam9x5-sckc"; + reg = <0xfffffe50 0x4>; + + slow_rc_osc: slow_rc_osc { + compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + atmel,startup-time-usec = <75>; + }; + + slow_osc: slow_osc { + compatible = "atmel,at91sam9x5-clk-slow-osc"; + #clock-cells = <0>; + clocks = <&slow_xtal>; + atmel,startup-time-usec = <1200000>; + }; + + clk32k: slowck { + compatible = "atmel,at91sam9x5-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc &slow_osc>; + }; + }; + rtc@fffffeb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffeb0 0x30>; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index f55ed072c8e6..b0b1331c1974 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,6 +18,14 @@ reg = <0x20000000 0x20000000>; }; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + ahb { apb { spi0: spi@f0004000 { diff --git a/arch/arm/boot/dts/twl4030_omap3.dtsi b/arch/arm/boot/dts/twl4030_omap3.dtsi index c353ef0a6ac7..3537ae5b2146 100644 --- a/arch/arm/boot/dts/twl4030_omap3.dtsi +++ b/arch/arm/boot/dts/twl4030_omap3.dtsi @@ -8,7 +8,7 @@ &twl { pinctrl-names = "default"; - pinctrl-0 = <&twl4030_pins>; + pinctrl-0 = <&twl4030_pins &twl4030_vpins>; }; &omap3_pmx_core { @@ -23,3 +23,20 @@ >; }; }; + +/* + * If your board is not using the I2C4 pins with twl4030, then don't include + * this file. For proper idle mode signaling with sys_clkreq and sys_off_mode + * pins we need to configure I2C4, or else use the legacy sys_nvmode1 and + * sys_nvmode2 signaling. + */ +&omap3_pmx_wkup { + twl4030_vpins: pinmux_twl4030_vpins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a00, PIN_INPUT | MUX_MODE0) /* i2c4_scl.i2c4_scl */ + OMAP3_WKUP_IOPAD(0x2a02, PIN_INPUT | MUX_MODE0) /* i2c4_sda.i2c4_sda */ + OMAP3_WKUP_IOPAD(0x2a06, PIN_OUTPUT | MUX_MODE0) /* sys_clkreq.sys_clkreq */ + OMAP3_WKUP_IOPAD(0x2a18, PIN_OUTPUT | MUX_MODE0) /* sys_off_mode.sys_off_mode */ + >; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index c1176abc34d9..80d8e4f3f626 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -177,6 +177,11 @@ }; }; + devcfg: devcfg@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + } ; + global_timer: timer@f8f00200 { compatible = "arm,cortex-a9-global-timer"; reg = <0xf8f00200 0x20>; diff --git a/arch/arm/configs/at91sam9g45_defconfig b/arch/arm/configs/at91sam9g45_defconfig index e181a50fd65a..c6661a60025d 100644 --- a/arch/arm/configs/at91sam9g45_defconfig +++ b/arch/arm/configs/at91sam9g45_defconfig @@ -83,7 +83,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=m -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_ATMEL=y @@ -146,6 +145,8 @@ CONFIG_DMADEVICES=y CONFIG_AT_HDMAC=y CONFIG_DMATEST=m # CONFIG_IOMMU_SUPPORT is not set +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index 85f846ae9ff2..5d7797d43d23 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -45,7 +45,6 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y @@ -65,6 +64,8 @@ CONFIG_MMC=y CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_IIO=y +CONFIG_AT91_ADC=y CONFIG_EXT2_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/axm55xx_defconfig b/arch/arm/configs/axm55xx_defconfig new file mode 100644 index 000000000000..d3260d7d5af1 --- /dev/null +++ b/arch/arm/configs/axm55xx_defconfig @@ -0,0 +1,248 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_AUDIT=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_ARCH_AXXIA=y +CONFIG_GPIO_PCA953X=y +CONFIG_ARM_LPAE=y +CONFIG_ARM_THUMBEE=y +CONFIG_ARM_ERRATA_430973=y +CONFIG_ARM_ERRATA_643719=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_754327=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_ARM_ERRATA_798181=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_AXXIA=y +CONFIG_SMP=y +CONFIG_NR_CPUS=16 +CONFIG_HOTPLUG_CPU=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_HIGHMEM=y +CONFIG_KSM=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y +CONFIG_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=y +# CONFIG_SUSPEND is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_INET_AH=y +CONFIG_INET_ESP=y +CONFIG_INET_IPCOMP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_BRIDGE=y +# CONFIG_WIRELESS is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_M25P80=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_UEVENT=y +CONFIG_NETDEVICES=y +CONFIG_TUN=y +CONFIG_VETH=y +CONFIG_VIRTIO_NET=y +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_WLAN is not set +# CONFIG_MOUSE_PS2_ALPS is not set +# CONFIG_MOUSE_PS2_LOGIPS2PP is not set +# CONFIG_MOUSE_PS2_SYNAPTICS is not set +# CONFIG_MOUSE_PS2_TRACKPOINT is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_AXXIA=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_DP83640_PHY=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PL061=y +CONFIG_POWER_SUPPLY=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_AXXIA=y +CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_JC42=y +CONFIG_SENSORS_LM75=y +CONFIG_PMBUS=y +CONFIG_SENSORS_LTC2978=y +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_HCD_AXXIA=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=y +CONFIG_CUSE=y +CONFIG_FSCACHE=y +CONFIG_FSCACHE_STATS=y +CONFIG_FSCACHE_HISTOGRAM=y +CONFIG_FSCACHE_DEBUG=y +CONFIG_FSCACHE_OBJECT_LIST=y +CONFIG_CACHEFILES=y +CONFIG_CACHEFILES_HISTOGRAM=y +CONFIG_ISO9660_FS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFS_FSCACHE=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_XCBC=y +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 3df3f3a79ef4..9d13dae99125 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -91,6 +91,7 @@ CONFIG_FB=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_UNSAFE_RESUME=y @@ -104,6 +105,8 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_PWM=y +CONFIG_PWM_BCM_KONA=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index f1aeb7d72712..bada59d93b67 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -80,6 +80,7 @@ CONFIG_MTD_UBI=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_ATA=y +CONFIG_BLK_DEV_SD=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y @@ -153,8 +154,12 @@ CONFIG_USB_HID=m CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_STORAGE=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_NOP_USB_XCEIV=y CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -177,7 +182,6 @@ CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y -CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 09e974392fa1..ef8815327e5b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,4 +1,3 @@ -# CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_NO_HZ=y @@ -33,7 +32,6 @@ CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y -CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y @@ -46,7 +44,11 @@ CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_ARM_IMX6Q_CPUFREQ=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_BINFMT_MISC=m @@ -72,6 +74,7 @@ CONFIG_RFKILL_INPUT=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set +CONFIG_DMA_CMA=y CONFIG_IMX_WEIM=y CONFIG_CONNECTOR=y CONFIG_MTD=y @@ -89,6 +92,7 @@ CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y @@ -183,6 +187,7 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_CODA=y CONFIG_SOC_CAMERA_OV2640=y CONFIG_DRM=y +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y @@ -215,7 +220,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -245,7 +249,7 @@ CONFIG_DRM_IMX_TVE=y CONFIG_DRM_IMX_LDB=y CONFIG_DRM_IMX_IPUV3_CORE=y CONFIG_DRM_IMX_IPUV3=y -CONFIG_COMMON_CLK_DEBUG=y +CONFIG_DRM_IMX_HDMI=y # CONFIG_IOMMU_SUPPORT is not set CONFIG_PWM=y CONFIG_PWM_IMX=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 6150108e15de..a9f992335eb2 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -26,7 +26,6 @@ CONFIG_ARCH_MXS=y # CONFIG_ARM_THUMB is not set CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y -CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -51,10 +50,10 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y -# CONFIG_M25PXX_USE_FAST_READ is not set CONFIG_MTD_SST25L=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y # CONFIG_BLK_DEV is not set CONFIG_EEPROM_AT24=y @@ -120,7 +119,6 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_UNSAFE_RESUME=y CONFIG_MMC_MXS=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -138,7 +136,6 @@ CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y CONFIG_STAGING=y CONFIG_MXS_LRADC=y -CONFIG_COMMON_CLK_DEBUG=y CONFIG_IIO=y CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PWM=y @@ -180,7 +177,7 @@ CONFIG_BLK_DEV_IO_TRACE=y CONFIG_STRICT_DEVMEM=y CONFIG_DEBUG_USER=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set +CONFIG_CRYPTO_DEV_MXS_DCP=y CONFIG_CRC_ITU_T=m CONFIG_CRC7=m CONFIG_FONTS=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index a4e8d017f25b..28f3b6e3b589 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,6 +21,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_MULTI_V6=y +CONFIG_POWER_AVS_OMAP=y +CONFIG_POWER_AVS_OMAP_CLASS3=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y CONFIG_ARCH_OMAP2=y @@ -42,6 +44,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y +CONFIG_CPU_IDLE=y CONFIG_BINFMT_MISC=y CONFIG_PM_DEBUG=y CONFIG_NET=y @@ -159,11 +162,14 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y CONFIG_W1=y CONFIG_POWER_SUPPLY=y +CONFIG_POWER_AVS=y CONFIG_SENSORS_LM75=m CONFIG_THERMAL=y CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_USER_SPACE=y +CONFIG_CPU_THERMAL=y CONFIG_TI_SOC_THERMAL=y +CONFIG_TI_THERMAL=y CONFIG_OMAP4_THERMAL=y CONFIG_OMAP5_THERMAL=y CONFIG_DRA752_THERMAL=y @@ -177,6 +183,7 @@ CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_PALMAS=y +CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y @@ -239,6 +246,7 @@ CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index dc3881e07630..869fa18ebeb2 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -122,7 +122,6 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y -CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y # CONFIG_SERIO is not set CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 42b823cd2d22..032a316eb802 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -81,6 +81,15 @@ #define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR #define IMX6SL_UART_BASE(n) IMX6SL_UART_BASE_ADDR(n) +#define IMX6SX_UART1_BASE_ADDR 0x02020000 +#define IMX6SX_UART2_BASE_ADDR 0x021e8000 +#define IMX6SX_UART3_BASE_ADDR 0x021ec000 +#define IMX6SX_UART4_BASE_ADDR 0x021f0000 +#define IMX6SX_UART5_BASE_ADDR 0x021f4000 +#define IMX6SX_UART6_BASE_ADDR 0x022a0000 +#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR +#define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -103,6 +112,8 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6Q) #elif defined(CONFIG_DEBUG_IMX6SL_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) +#elif defined(CONFIG_DEBUG_IMX6SX_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S index 9d653d475903..9ef57612811d 100644 --- a/arch/arm/include/debug/msm.S +++ b/arch/arm/include/debug/msm.S @@ -15,51 +15,15 @@ * */ -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_QSD8X50) -#define MSM_UART1_PHYS 0xA9A00000 -#define MSM_UART2_PHYS 0xA9B00000 -#define MSM_UART3_PHYS 0xA9C00000 -#elif defined(CONFIG_ARCH_MSM7X30) -#define MSM_UART1_PHYS 0xACA00000 -#define MSM_UART2_PHYS 0xACB00000 -#define MSM_UART3_PHYS 0xACC00000 -#endif - -#if defined(CONFIG_DEBUG_MSM_UART1) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART1_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART2) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART2_PHYS -#elif defined(CONFIG_DEBUG_MSM_UART3) -#define MSM_DEBUG_UART_BASE 0xE1000000 -#define MSM_DEBUG_UART_PHYS MSM_UART3_PHYS -#endif - -#ifdef CONFIG_DEBUG_MSM8660_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x19C40000 -#endif - -#ifdef CONFIG_DEBUG_MSM8960_UART -#define MSM_DEBUG_UART_BASE 0xF0040000 -#define MSM_DEBUG_UART_PHYS 0x16440000 -#endif - -#ifdef CONFIG_DEBUG_MSM8974_UART -#define MSM_DEBUG_UART_BASE 0xFA71E000 -#define MSM_DEBUG_UART_PHYS 0xF991E000 -#endif - .macro addruart, rp, rv, tmp -#ifdef MSM_DEBUG_UART_PHYS - ldr \rp, =MSM_DEBUG_UART_PHYS - ldr \rv, =MSM_DEBUG_UART_BASE +#ifdef CONFIG_DEBUG_UART_PHYS + ldr \rp, =CONFIG_DEBUG_UART_PHYS + ldr \rv, =CONFIG_DEBUG_UART_VIRT #endif .endm .macro senduart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ Write the 1 character to UARTDM_TF str \rd, [\rx, #0x70] #else @@ -68,7 +32,7 @@ .endm .macro waituart, rd, rx -#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS +#ifdef CONFIG_DEBUG_QCOM_UARTDM @ check for TX_EMT in UARTDM_SR ldr \rd, [\rx, #0x08] tst \rd, #0x08 diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S index ba12cc44b2cb..b88933849a17 100644 --- a/arch/arm/include/debug/vf.S +++ b/arch/arm/include/debug/vf.S @@ -7,9 +7,20 @@ * */ +#define VF_UART0_BASE_ADDR 0x40027000 +#define VF_UART1_BASE_ADDR 0x40028000 +#define VF_UART2_BASE_ADDR 0x40029000 +#define VF_UART3_BASE_ADDR 0x4002a000 +#define VF_UART_BASE_ADDR(n) VF_UART##n##_BASE_ADDR +#define VF_UART_BASE(n) VF_UART_BASE_ADDR(n) +#define VF_UART_PHYSICAL_BASE VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT) + +#define VF_UART_VIRTUAL_BASE 0xfe000000 + .macro addruart, rp, rv, tmp - ldr \rp, =0x40028000 @ physical - ldr \rv, =0xfe028000 @ virtual + ldr \rp, =VF_UART_PHYSICAL_BASE @ physical + and \rv, \rp, #0xffffff @ offset within 16MB section + add \rv, \rv, #VF_UART_VIRTUAL_BASE .endm .macro senduart, rd, rx diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S index 0b762fafa758..bd13dedbdeff 100644 --- a/arch/arm/include/debug/zynq.S +++ b/arch/arm/include/debug/zynq.S @@ -20,18 +20,18 @@ #define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ #define UART0_PHYS 0xE0000000 +#define UART0_VIRT 0xF0000000 #define UART1_PHYS 0xE0001000 -#define UART_SIZE SZ_4K -#define UART_VIRT 0xF0001000 +#define UART1_VIRT 0xF0001000 #if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) # define LL_UART_PADDR UART1_PHYS +# define LL_UART_VADDR UART1_VIRT #else # define LL_UART_PADDR UART0_PHYS +# define LL_UART_VADDR UART0_VIRT #endif -#define LL_UART_VADDR UART_VIRT - .macro addruart, rp, rv, tmp ldr \rp, =LL_UART_PADDR @ physical ldr \rv, =LL_UART_VADDR @ virtual @@ -43,12 +43,14 @@ .macro waituart,rd,rx 1001: ldr \rd, [\rx, #UART_SR_OFFSET] +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXEMPTY beq 1001b .endm .macro busyuart,rd,rx 1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register +ARM_BE8( rev \rd, \rd ) tst \rd, #UART_SR_TXFULL @ bne 1002b @ wait if FIFO is full .endm diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index f3f19f21352a..4860918b411e 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -25,6 +25,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7cd6f19945ed..adcfb88a5d7d 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -24,12 +24,11 @@ #include <mach/at91sam9260_matrix.h> #include <mach/at91_matrix.h> #include <mach/at91sam9_smc.h> -#include <mach/at91_adc.h> #include <mach/hardware.h> #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host @@ -1325,13 +1324,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g20 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = AT91_ADC_MR, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1349,9 +1341,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PA22, 0); - data->num_channels = 4; data->startup_time = 10; - data->registers = &at91_adc_register_g20; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 80e35895d28f..43b21f456f6e 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -29,7 +29,7 @@ #include "board.h" #include "generic.h" - +#include "gpio.h" /* -------------------------------------------------------------------- * USB Host diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 43d53d6156dd..953616e5dbcb 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -28,6 +28,7 @@ #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 5e6f498db0a8..9d3d544ac19c 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -182,7 +182,7 @@ static struct clk vdec_clk = { static struct clk adc_op_clk = { .name = "adc_op_clk", .type = CLK_TYPE_PERIPHERAL, - .rate_hz = 13200000, + .rate_hz = 300000, }; /* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index dab362c06487..d943363c1845 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -25,7 +25,6 @@ #include <linux/fb.h> #include <video/atmel_lcdc.h> -#include <mach/at91_adc.h> #include <mach/at91sam9g45.h> #include <mach/at91sam9g45_matrix.h> #include <mach/at91_matrix.h> @@ -39,6 +38,7 @@ #include "board.h" #include "generic.h" #include "clock.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -1133,58 +1133,7 @@ static void __init at91_add_device_rtc(void) {} /* -------------------------------------------------------------------- - * Touchscreen - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; - -static struct resource tsadcc_resources[] = { - [0] = { - .start = AT91SAM9G45_BASE_TSC, - .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, - .flags = IORESOURCE_IRQ, - } -}; - -static struct platform_device at91sam9g45_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, - }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), -}; - -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) -{ - if (!data) - return; - - at91_set_gpio_input(AT91_PIN_PD20, 0); /* AD0_XR */ - at91_set_gpio_input(AT91_PIN_PD21, 0); /* AD1_XL */ - at91_set_gpio_input(AT91_PIN_PD22, 0); /* AD2_YT */ - at91_set_gpio_input(AT91_PIN_PD23, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9g45_tsadcc_device); -} -#else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * ADC + * ADC and touchscreen * -------------------------------------------------------------------- */ #if IS_ENABLED(CONFIG_AT91_ADC) @@ -1236,13 +1185,6 @@ static struct at91_adc_trigger at91_adc_triggers[] = { }, }; -static struct at91_adc_reg_desc at91_adc_register_g45 = { - .channel_base = AT91_ADC_CHR(0), - .drdy_mask = AT91_ADC_DRDY, - .status_register = AT91_ADC_SR, - .trigger_register = 0x08, -}; - void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) @@ -1268,9 +1210,7 @@ void __init at91_add_device_adc(struct at91_adc_data *data) if (data->use_external_triggers) at91_set_A_periph(AT91_PIN_PD28, 0); - data->num_channels = 8; data->startup_time = 40; - data->registers = &at91_adc_register_g45; data->trigger_number = 4; data->trigger_list = at91_adc_triggers; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 57f12d86c0e6..a79960f57e6a 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -153,6 +153,11 @@ static struct clk ac97_clk = { .pmc_mask = 1 << AT91SAM9RL_ID_AC97C, .type = CLK_TYPE_PERIPHERAL, }; +static struct clk adc_op_clk = { + .name = "adc_op_clk", + .type = CLK_TYPE_PERIPHERAL, + .rate_hz = 1000000, +}; static struct clk *periph_clocks[] __initdata = { &pioA_clk, @@ -178,6 +183,7 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &lcdc_clk, &ac97_clk, + &adc_op_clk, // irq0 }; @@ -216,6 +222,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk), CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk), CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk), + CLKDEV_CON_ID("adc_clk", &tsc_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 428fc412aaf1..044ad8bc6963 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -23,9 +23,11 @@ #include <mach/at91sam9_smc.h> #include <mach/hardware.h> #include <linux/platform_data/dma-atmel.h> +#include <linux/platform_data/at91_adc.h> #include "board.h" #include "generic.h" +#include "gpio.h" /* -------------------------------------------------------------------- @@ -608,14 +610,13 @@ static void __init at91_add_device_tc(void) { } /* -------------------------------------------------------------------- - * Touchscreen + * ADC and Touchscreen * -------------------------------------------------------------------- */ -#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE) -static u64 tsadcc_dmamask = DMA_BIT_MASK(32); -static struct at91_tsadcc_data tsadcc_data; +#if IS_ENABLED(CONFIG_AT91_ADC) +static struct at91_adc_data adc_data; -static struct resource tsadcc_resources[] = { +static struct resource adc_resources[] = { [0] = { .start = AT91SAM9RL_BASE_TSC, .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1, @@ -628,36 +629,71 @@ static struct resource tsadcc_resources[] = { } }; -static struct platform_device at91sam9rl_tsadcc_device = { - .name = "atmel_tsadcc", - .id = -1, - .dev = { - .dma_mask = &tsadcc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &tsadcc_data, +static struct platform_device at91_adc_device = { + .name = "at91sam9rl-adc", + .id = -1, + .dev = { + .platform_data = &adc_data, }, - .resource = tsadcc_resources, - .num_resources = ARRAY_SIZE(tsadcc_resources), + .resource = adc_resources, + .num_resources = ARRAY_SIZE(adc_resources), }; -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) +static struct at91_adc_trigger at91_adc_triggers[] = { + [0] = { + .name = "external-rising", + .value = 1, + .is_external = true, + }, + [1] = { + .name = "external-falling", + .value = 2, + .is_external = true, + }, + [2] = { + .name = "external-any", + .value = 3, + .is_external = true, + }, + [3] = { + .name = "continuous", + .value = 6, + .is_external = false, + }, +}; + +void __init at91_add_device_adc(struct at91_adc_data *data) { if (!data) return; - at91_set_A_periph(AT91_PIN_PA17, 0); /* AD0_XR */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* AD1_XL */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* AD2_YT */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* AD3_TB */ - - tsadcc_data = *data; - platform_device_register(&at91sam9rl_tsadcc_device); + if (test_bit(0, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA17, 0); + if (test_bit(1, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA18, 0); + if (test_bit(2, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA19, 0); + if (test_bit(3, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PA20, 0); + if (test_bit(4, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD6, 0); + if (test_bit(5, &data->channels_used)) + at91_set_A_periph(AT91_PIN_PD7, 0); + + if (data->use_external_triggers) + at91_set_A_periph(AT91_PIN_PB15, 0); + + data->startup_time = 40; + data->trigger_number = 4; + data->trigger_list = at91_adc_triggers; + + adc_data = *data; + platform_device_register(&at91_adc_device); } #else -void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {} +void __init at91_add_device_adc(struct at91_adc_data *data) {} #endif - /* -------------------------------------------------------------------- * RTC * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 35ab632bbf68..3f6dbcc34022 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init onearm_init_early(void) { diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index f95e31cda4b3..597c649170aa 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -46,6 +46,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init afeb9260_init_early(void) diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 112e867c4abe..a30502c8d379 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -44,6 +44,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cam60_init_early(void) diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 92983050a9bd..47313d3ee037 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init carmeva_init_early(void) diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 008527efdbcf..2037f78c84e7 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -48,6 +48,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init cpu9krea_init_early(void) { diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 42f1353a4baf..c094350c9314 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -43,6 +43,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static struct gpio_led cpuat91_leds[] = { { diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index e5fde215225b..0e35a45cf8d4 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -42,7 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" - +#include "gpio.h" static void __init csb337_init_early(void) { diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index fdf11061c577..18d027f529a8 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init csb637_init_early(void) diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index f9be8161bbfa..aa457a8b22f5 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -38,6 +38,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init eb9200_init_early(void) diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index b2fcd71262ba..ede1373ccaba 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ecb_at91init_early(void) diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 77de410efc90..4e75321a8f2a 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -31,6 +31,8 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" + static void __init eco920_init_early(void) { diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 737c08563628..68f1ab6bd08f 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,6 +37,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init flexibity_init_early(void) { diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index c20a870ea9c9..8b22c60bb238 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -47,6 +47,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * The FOX Board G20 hardware comes as the "Netus G20" board with diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 416bae8435ee..b729dd1271bf 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -39,6 +39,7 @@ #include "generic.h" #include "gsia18s.h" #include "stamp9g20.h" +#include "gpio.h" static void __init gsia18s_init_early(void) { diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 88e2f5d2d16d..93b1df42f639 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,6 +39,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kafa_init_early(void) diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 0c519d9ebffc..d58d36225e08 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,6 +42,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init kb9202_init_early(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 5f25fa54eb93..b48d95ec5152 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,6 +37,7 @@ #include "sam9_smc.h" #include "generic.h" #include "stamp9g20.h" +#include "gpio.h" static void __init pcontrol_g20_init_early(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index ab2b2ec36c14..2c0f2d554d84 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,6 +43,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init picotux200_init_early(void) diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 8b17dadc1aba..953cea416754 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,6 +45,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index f6d7f1958c7e..f28e8b74df4b 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -31,6 +31,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init rsi_ews_init_early(void) { diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 43ee4dc43b50..d24dda67e2d3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -43,6 +43,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index f4f8735315da..65dea12d685e 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -49,6 +49,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 473546b9408b..4637432de08f 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -53,6 +53,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 2f931915c80c..cd2726ee5add 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -52,6 +52,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index f9cd1f2c7146..e1be6e25b380 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" /* * board revision encoding diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index ef39078c8ce2..1ea61328f30d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,6 +50,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -300,21 +301,13 @@ static struct atmel_lcdfb_pdata __initdata ek_lcdc_data; /* - * Touchscreen - */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 300000, - .pendet_debounce = 0x0d, - .ts_sample_hold_time = 0x0a, -}; - -/* - * ADCs + * ADCs and touchscreen */ static struct at91_adc_data ek_adc_data = { .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7), .use_external_triggers = true, .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; /* @@ -485,9 +478,7 @@ static void __init ek_board_init(void) at91_add_device_isi(&isi_data, true); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); - /* Touch Screen */ - at91_add_device_tsadcc(&ek_tsadcc_data); - /* ADC */ + /* ADC and touchscreen */ at91_add_device_adc(&ek_adc_data); /* Push Buttons */ ek_add_device_buttons(); diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 604eecf6cd70..b64648b4a1fc 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -18,6 +18,7 @@ #include <linux/clk.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/platform_data/at91_adc.h> #include <video/atmel_lcdc.h> @@ -38,6 +39,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" static void __init ek_init_early(void) @@ -229,12 +231,13 @@ static struct gpio_led ek_leds[] = { /* - * Touchscreen + * ADC + Touchscreen */ -static struct at91_tsadcc_data ek_tsadcc_data = { - .adc_clock = 1000000, - .pendet_debounce = 0x0f, - .ts_sample_hold_time = 0x03, +static struct at91_adc_data ek_adc_data = { + .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5), + .use_external_triggers = true, + .vref = 3300, + .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE, }; @@ -310,8 +313,8 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ at91_add_device_ac97(&ek_ac97_data); - /* Touch Screen Controller */ - at91_add_device_tsadcc(&ek_tsadcc_data); + /* Touch Screen Controller + ADC */ + at91_add_device_adc(&ek_adc_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* Push Buttons */ diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index f1d49e929ccb..1b870e6def0c 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -38,6 +38,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index e4a5ac17cdbc..3b575036ff96 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,6 +32,7 @@ #include "board.h" #include "sam9_smc.h" #include "generic.h" +#include "gpio.h" void __init stamp9g20_init_early(void) diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index be083771df2e..46fdb0c68a68 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -50,6 +50,7 @@ #include "at91_aic.h" #include "board.h" #include "generic.h" +#include "gpio.h" static void __init yl9200_init_early(void) diff --git a/arch/arm/mach-at91/board.h b/arch/arm/mach-at91/board.h index 6c08b341167d..4e773b55bc2d 100644 --- a/arch/arm/mach-at91/board.h +++ b/arch/arm/mach-at91/board.h @@ -118,9 +118,6 @@ struct isi_platform_data; extern void __init at91_add_device_isi(struct isi_platform_data *data, bool use_pck_as_mck); - /* Touchscreen Controller */ -extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data); - /* CAN */ extern void __init at91_add_device_can(struct at91_can_data *data); diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index a5afcf76550e..12ed05bbdc5c 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -29,6 +29,7 @@ #include <mach/at91_pio.h> #include "generic.h" +#include "gpio.h" #define MAX_NB_GPIO_PER_BANK 32 diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/gpio.h index 5fc23771c154..eed465ab0dd7 100644 --- a/arch/arm/mach-at91/include/mach/gpio.h +++ b/arch/arm/mach-at91/gpio.h @@ -209,14 +209,6 @@ extern int at91_get_gpio_value(unsigned pin); extern void at91_gpio_suspend(void); extern void at91_gpio_resume(void); -#ifdef CONFIG_PINCTRL_AT91 -extern void at91_pinctrl_gpio_suspend(void); -extern void at91_pinctrl_gpio_resume(void); -#else -static inline void at91_pinctrl_gpio_suspend(void) {} -static inline void at91_pinctrl_gpio_resume(void) {} -#endif - #endif /* __ASSEMBLY__ */ #endif diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h deleted file mode 100644 index c287307b9a3b..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_adc.h +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_adc.h - * - * Copyright (C) SAN People - * - * Analog-to-Digital Converter (ADC) registers. - * Based on AT91SAM9260 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_ADC_H -#define AT91_ADC_H - -#define AT91_ADC_CR 0x00 /* Control Register */ -#define AT91_ADC_SWRST (1 << 0) /* Software Reset */ -#define AT91_ADC_START (1 << 1) /* Start Conversion */ - -#define AT91_ADC_MR 0x04 /* Mode Register */ -#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */ -#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */ -#define AT91_ADC_TRGSEL_TC0 (0 << 1) -#define AT91_ADC_TRGSEL_TC1 (1 << 1) -#define AT91_ADC_TRGSEL_TC2 (2 << 1) -#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1) -#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */ -#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */ -#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */ -#define AT91_ADC_PRESCAL_9G45 (0xff << 8) -#define AT91_ADC_PRESCAL_(x) ((x) << 8) -#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */ -#define AT91_ADC_STARTUP_9G45 (0x7f << 16) -#define AT91_ADC_STARTUP_9X5 (0xf << 16) -#define AT91_ADC_STARTUP_(x) ((x) << 16) -#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */ -#define AT91_ADC_SHTIM_(x) ((x) << 24) - -#define AT91_ADC_CHER 0x10 /* Channel Enable Register */ -#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */ -#define AT91_ADC_CHSR 0x18 /* Channel Status Register */ -#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */ - -#define AT91_ADC_SR 0x1C /* Status Register */ -#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */ -#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */ -#define AT91_ADC_DRDY (1 << 16) /* Data Ready */ -#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */ -#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */ -#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */ - -#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */ -#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */ - -#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */ -#define AT91_ADC_LDATA (0x3ff) - -#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */ -#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */ -#define AT91_ADC_IER_PEN (1 << 29) -#define AT91_ADC_IER_NOPEN (1 << 30) -#define AT91_ADC_IER_XRDY (1 << 20) -#define AT91_ADC_IER_YRDY (1 << 21) -#define AT91_ADC_IER_PRDY (1 << 22) -#define AT91_ADC_ISR_PENS (1 << 31) - -#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */ -#define AT91_ADC_DATA (0x3ff) - -#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */ - -#define AT91_ADC_ACR 0x94 /* Analog Control Register */ -#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */ - -#define AT91_ADC_TSMR 0xB0 -#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */ -#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0) -#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0) -#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0) -#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */ -#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4) -#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */ -#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */ -#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28) -#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */ -#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */ -#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */ - -#define AT91_ADC_TSXPOSR 0xB4 -#define AT91_ADC_TSYPOSR 0xB8 -#define AT91_ADC_TSPRESSR 0xBC - -#define AT91_ADC_TRGR_9260 AT91_ADC_MR -#define AT91_ADC_TRGR_9G45 0x08 -#define AT91_ADC_TRGR_9X5 0xC0 - -/* Trigger Register bit field */ -#define AT91_ADC_TRGR_TRGPER (0xffff << 16) -#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16) -#define AT91_ADC_TRGR_TRGMOD (0x7 << 0) -#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index f17aa3150019..56338245653a 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -104,5 +104,20 @@ /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ +/* + * FIXME: this is needed to communicate between the pinctrl driver and + * the PM implementation in the machine. Possibly part of the PM + * implementation should be moved down into the pinctrl driver and get + * called as part of the generic suspend/resume path. + */ +#ifndef __ASSEMBLY__ +#ifdef CONFIG_PINCTRL_AT91 +extern void at91_pinctrl_gpio_suspend(void); +extern void at91_pinctrl_gpio_resume(void); +#else +static inline void at91_pinctrl_gpio_suspend(void) {} +static inline void at91_pinctrl_gpio_resume(void) {} +#endif +#endif #endif diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 3e22978b5547..77c4d8fd03fd 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include "board.h" +#include "gpio.h" /* ------------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 8bda1cefdf96..e95554532987 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -32,6 +32,7 @@ #include "at91_aic.h" #include "generic.h" #include "pm.h" +#include "gpio.h" /* * Show the reason for the previous system reset. diff --git a/arch/arm/mach-axxia/Kconfig b/arch/arm/mach-axxia/Kconfig new file mode 100644 index 000000000000..8be7e0ae1922 --- /dev/null +++ b/arch/arm/mach-axxia/Kconfig @@ -0,0 +1,16 @@ +config ARCH_AXXIA + bool "LSI Axxia platforms" if (ARCH_MULTI_V7 && ARM_LPAE) + select ARCH_DMA_ADDR_T_64BIT + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select HAVE_ARM_ARCH_TIMER + select MFD_SYSCON + select MIGHT_HAVE_PCI + select PCI_DOMAINS if PCI + select ZONE_DMA + help + This enables support for the LSI Axxia devices. + + The LSI Axxia platforms require a Flattened Device Tree to be passed + to the kernel. diff --git a/arch/arm/mach-axxia/Makefile b/arch/arm/mach-axxia/Makefile new file mode 100644 index 000000000000..ec4f68b460c6 --- /dev/null +++ b/arch/arm/mach-axxia/Makefile @@ -0,0 +1,2 @@ +obj-y += axxia.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-axxia/axxia.c b/arch/arm/mach-axxia/axxia.c new file mode 100644 index 000000000000..19e5a1d95397 --- /dev/null +++ b/arch/arm/mach-axxia/axxia.c @@ -0,0 +1,28 @@ +/* + * Support for the LSI Axxia SoC devices based on ARM cores. + * + * Copyright (C) 2012 LSI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/init.h> +#include <asm/mach/arch.h> + +static const char *axxia_dt_match[] __initconst = { + "lsi,axm5516", + "lsi,axm5516-sim", + "lsi,axm5516-emu", + NULL +}; + +DT_MACHINE_START(AXXIA_DT, "LSI Axxia AXM55XX") + .dt_compat = axxia_dt_match, +MACHINE_END diff --git a/arch/arm/mach-axxia/platsmp.c b/arch/arm/mach-axxia/platsmp.c new file mode 100644 index 000000000000..959d4df3d2b6 --- /dev/null +++ b/arch/arm/mach-axxia/platsmp.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-axxia/platsmp.c + * + * Copyright (C) 2012 LSI Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/smp.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/cacheflush.h> + +/* Syscon register offsets for releasing cores from reset */ +#define SC_CRIT_WRITE_KEY 0x1000 +#define SC_RST_CPU_HOLD 0x1010 + +/* + * Write the kernel entry point for secondary CPUs to the specified address + */ +static void write_release_addr(u32 release_phys) +{ + u32 *virt = (u32 *) phys_to_virt(release_phys); + writel_relaxed(virt_to_phys(secondary_startup), virt); + /* Make sure this store is visible to other CPUs */ + smp_wmb(); + __cpuc_flush_dcache_area(virt, sizeof(u32)); +} + +static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + struct device_node *syscon_np; + void __iomem *syscon; + u32 tmp; + + syscon_np = of_find_compatible_node(NULL, NULL, "lsi,axxia-syscon"); + if (!syscon_np) + return -ENOENT; + + syscon = of_iomap(syscon_np, 0); + if (!syscon) + return -ENOMEM; + + tmp = readl(syscon + SC_RST_CPU_HOLD); + writel(0xab, syscon + SC_CRIT_WRITE_KEY); + tmp &= ~(1 << cpu); + writel(tmp, syscon + SC_RST_CPU_HOLD); + + return 0; +} + +static void __init axxia_smp_prepare_cpus(unsigned int max_cpus) +{ + int cpu_count = 0; + int cpu; + + /* + * Initialise the present map, which describes the set of CPUs actually + * populated at the present time. + */ + for_each_possible_cpu(cpu) { + struct device_node *np; + u32 release_phys; + + np = of_get_cpu_node(cpu, NULL); + if (!np) + continue; + if (of_property_read_u32(np, "cpu-release-addr", &release_phys)) + continue; + + if (cpu_count < max_cpus) { + set_cpu_present(cpu, true); + cpu_count++; + } + + if (release_phys != 0) + write_release_addr(release_phys); + } +} + +static struct smp_operations axxia_smp_ops __initdata = { + .smp_prepare_cpus = axxia_smp_prepare_cpus, + .smp_boot_secondary = axxia_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(axxia_smp, "lsi,syscon-release", &axxia_smp_ops); diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 2113d92c668a..9bc6db1c1348 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -1,19 +1,17 @@ config ARCH_BCM - bool "Broadcom SoC Support" - depends on ARCH_MULTIPLATFORM + bool "Broadcom SoC Support" if ARCH_MULTI_V6_V7 help - This enables support for Broadcom ARM based SoC - chips - -if ARCH_BCM + This enables support for Broadcom ARM based SoC chips menu "Broadcom SoC Selection" + depends on ARCH_BCM config ARCH_BCM_MOBILE bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 select ARM_GIC select GPIO_BCM_KONA select TICK_ONESHOT @@ -91,5 +89,3 @@ config ARCH_BCM_5301X network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx endmenu - -endif diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index b0cb0722acd2..101e0f356730 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -1,9 +1,11 @@ config ARCH_BERLIN bool "Marvell Berlin SoCs" if ARCH_MULTI_V7 + select ARCH_REQUIRE_GPIOLIB select ARM_GIC select GENERIC_IRQ_CHIP select DW_APB_ICTL select DW_APB_TIMER_OF + select PINCTRL if ARCH_BERLIN @@ -14,11 +16,19 @@ config MACH_BERLIN_BG2 select CACHE_L2X0 select CPU_PJ4B select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2 config MACH_BERLIN_BG2CD bool "Marvell Armada 1500-mini (BG2CD)" select CACHE_L2X0 select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2CD + +config MACH_BERLIN_BG2Q + bool "Marvell Armada 1500 Pro (BG2-Q)" + select CACHE_L2X0 + select HAVE_ARM_TWD if SMP + select PINCTRL_BERLIN_BG2Q endmenu diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index bc4344aa1009..4a5a7aedcb76 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -108,6 +108,38 @@ static int __initdata gpio2_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *dove_irq_base = IRQ_VIRT_BASE; + +static asmlinkage void +__exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init dove_init_irq(void) { int i; @@ -115,6 +147,10 @@ void __init dove_init_irq(void) orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(dove_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-71. */ diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index fc8bf18e222d..d58995c9a95a 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -7,97 +7,102 @@ # Configuration options for the EXYNOS4 +config ARCH_EXYNOS + bool "Samsung EXYNOS" if ARCH_MULTI_V7 + select ARCH_HAS_BANDGAP + select ARCH_HAS_CPUFREQ + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select ARM_GIC + select COMMON_CLK_SAMSUNG + select HAVE_ARM_SCU if SMP + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS + select PINCTRL + select PINCTRL_EXYNOS + select PM_GENERIC_DOMAINS if PM_RUNTIME + select S5P_DEV_MFC + select SRAM + help + Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5) + if ARCH_EXYNOS menu "SAMSUNG EXYNOS SoCs Support" +config ARCH_EXYNOS3 + bool "SAMSUNG EXYNOS3" + select ARM_CPU_SUSPEND if PM + help + Samsung EXYNOS3 (Crotex-A7) SoC based systems + config ARCH_EXYNOS4 bool "SAMSUNG EXYNOS4" default y - select ARM_AMBA - select CLKSRC_OF + select ARM_CPU_SUSPEND if PM_SLEEP select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 select CPU_EXYNOS4210 select GIC_NON_BANKED select KEYBOARD_SAMSUNG if INPUT_KEYBOARD - select HAVE_ARM_SCU if SMP - select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select PINCTRL - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC help - Samsung EXYNOS4 SoCs based systems + Samsung EXYNOS4 (Cortex-A9) SoC based systems config ARCH_EXYNOS5 bool "SAMSUNG EXYNOS5" - select ARM_AMBA - select CLKSRC_OF - select HAVE_ARM_SCU if SMP - select HAVE_SMP - select PINCTRL + default y help - Samsung EXYNOS5 (Cortex-A15) SoC based systems + Samsung EXYNOS5 (Cortex-A15/A7) SoC based systems comment "EXYNOS SoCs" +config SOC_EXYNOS3250 + bool "SAMSUNG EXYNOS3250" + default y + depends on ARCH_EXYNOS3 + config CPU_EXYNOS4210 bool "SAMSUNG EXYNOS4210" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select ARM_CPU_SUSPEND if PM_SLEEP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4210 CPU support config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4212 SoC support config SOC_EXYNOS4412 bool "SAMSUNG EXYNOS4412" default y depends on ARCH_EXYNOS4 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select SAMSUNG_DMADEV - help - Enable EXYNOS4412 SoC support config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 - select ARCH_HAS_BANDGAP - select PINCTRL_EXYNOS - select PM_GENERIC_DOMAINS if PM_RUNTIME - select S5P_DEV_MFC - select SAMSUNG_DMADEV - help - Enable EXYNOS5250 SoC support + +config SOC_EXYNOS5260 + bool "SAMSUNG EXYNOS5260" + default y + depends on ARCH_EXYNOS5 + +config SOC_EXYNOS5410 + bool "SAMSUNG EXYNOS5410" + default y + depends on ARCH_EXYNOS5 config SOC_EXYNOS5420 bool "SAMSUNG EXYNOS5420" default y depends on ARCH_EXYNOS5 - select PM_GENERIC_DOMAINS if PM_RUNTIME - help - Enable EXYNOS5420 SoC support config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y depends on ARCH_EXYNOS5 select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_HAS_BANDGAP select ARCH_HAS_OPP select HAVE_ARM_ARCH_TIMER select AUTO_ZRELADDR @@ -108,6 +113,19 @@ config SOC_EXYNOS5440 help Enable EXYNOS5440 SoC support +config SOC_EXYNOS5800 + bool "SAMSUNG EXYNOS5800" + default y + depends on SOC_EXYNOS5420 + endmenu +config EXYNOS5420_MCPM + bool "Exynos5420 Multi-Cluster PM support" + depends on MCPM && SOC_EXYNOS5420 + select ARM_CCI + help + This is needed to provide CPU and cluster power management + on Exynos5420 implementing big.LITTLE. + endif diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index f6dcc256db56..9f3258880949 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -5,6 +5,8 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include + obj-y := obj-m := obj-n := @@ -21,6 +23,10 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +CFLAGS_hotplug.o += -march=armv7-a plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec) + +obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o +CFLAGS_mcpm-exynos.o += -march=armv7-a diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index c1a2f2207af0..5dba5a1ee6c2 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -15,14 +15,19 @@ #include <linux/reboot.h> #include <linux/of.h> +#define EXYNOS3250_SOC_ID 0xE3472000 +#define EXYNOS3_SOC_MASK 0xFFFFF000 + #define EXYNOS4210_CPU_ID 0x43210000 #define EXYNOS4212_CPU_ID 0x43220000 #define EXYNOS4412_CPU_ID 0xE4412200 #define EXYNOS4_CPU_MASK 0xFFFE0000 #define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5410_SOC_ID 0xE5410000 #define EXYNOS5420_SOC_ID 0xE5420000 #define EXYNOS5440_SOC_ID 0xE5440000 +#define EXYNOS5800_SOC_ID 0xE5422000 #define EXYNOS5_SOC_MASK 0xFFFFF000 extern unsigned long samsung_cpu_id; @@ -33,12 +38,21 @@ static inline int is_samsung_##name(void) \ return ((samsung_cpu_id & mask) == (id & mask)); \ } +IS_SAMSUNG_CPU(exynos3250, EXYNOS3250_SOC_ID, EXYNOS3_SOC_MASK) IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5410, EXYNOS5410_SOC_ID, EXYNOS5_SOC_MASK) IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5800, EXYNOS5800_SOC_ID, EXYNOS5_SOC_MASK) + +#if defined(CONFIG_SOC_EXYNOS3250) +# define soc_is_exynos3250() is_samsung_exynos3250() +#else +# define soc_is_exynos3250() 0 +#endif #if defined(CONFIG_CPU_EXYNOS4210) # define soc_is_exynos4210() is_samsung_exynos4210() @@ -68,6 +82,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5250() 0 #endif +#if defined(CONFIG_SOC_EXYNOS5410) +# define soc_is_exynos5410() is_samsung_exynos5410() +#else +# define soc_is_exynos5410() 0 +#endif + #if defined(CONFIG_SOC_EXYNOS5420) # define soc_is_exynos5420() is_samsung_exynos5420() #else @@ -80,13 +100,21 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5440() 0 #endif +#if defined(CONFIG_SOC_EXYNOS5800) +# define soc_is_exynos5800() is_samsung_exynos5800() +#else +# define soc_is_exynos5800() 0 +#endif + #define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \ soc_is_exynos4412()) -#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420()) +#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \ + soc_is_exynos5420() || soc_is_exynos5800()) void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1); struct map_desc; +extern void __iomem *sysram_ns_base_addr; void exynos_init_io(void); void exynos_restart(enum reboot_mode mode, const char *cmd); void exynos_cpuidle_init(void); @@ -131,6 +159,12 @@ struct exynos_pmu_conf { }; extern void exynos_sys_powerdown_conf(enum sys_powerdown mode); +extern void exynos_cpu_power_down(int cpu); +extern void exynos_cpu_power_up(int cpu); +extern int exynos_cpu_power_state(int cpu); +extern void exynos_cluster_power_down(int cluster); +extern void exynos_cluster_power_up(int cluster); +extern int exynos_cluster_power_state(int cluster); extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 59aab756702e..4800b1ce3d71 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -112,51 +112,6 @@ static struct map_desc exynos4_iodesc[] __initdata = { }, }; -static struct map_desc exynos4_iodesc0[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM0), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4_iodesc1[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM1), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4210_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4210_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos4x12_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS4x12_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc exynos5250_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSRAM_NS, - .pfn = __phys_to_pfn(EXYNOS5250_PA_SYSRAM_NS), - .length = SZ_4K, - .type = MT_DEVICE, - }, -}; - static struct map_desc exynos5_iodesc[] __initdata = { { .virtual = (unsigned long)S3C_VA_SYS, @@ -179,11 +134,6 @@ static struct map_desc exynos5_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_SYSRAM, - .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = (unsigned long)S5P_VA_CMU, .pfn = __phys_to_pfn(EXYNOS5_PA_CMU), .length = 144 * SZ_1K, @@ -278,20 +228,6 @@ static void __init exynos_map_io(void) if (soc_is_exynos5()) iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc)); - - if (soc_is_exynos4210()) { - if (samsung_rev() == EXYNOS4210_REV_0) - iotable_init(exynos4_iodesc0, - ARRAY_SIZE(exynos4_iodesc0)); - else - iotable_init(exynos4_iodesc1, - ARRAY_SIZE(exynos4_iodesc1)); - iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc)); - } - if (soc_is_exynos4212() || soc_is_exynos4412()) - iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc)); - if (soc_is_exynos5250()) - iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc)); } void __init exynos_init_io(void) @@ -310,6 +246,9 @@ static int __init exynos4_l2x0_cache_init(void) { int ret; + if (!soc_is_exynos4()) + return 0; + ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK); if (ret) return ret; @@ -357,12 +296,15 @@ static void __init exynos_dt_machine_init(void) } static char const *exynos_dt_compat[] __initconst = { + "samsung,exynos3", + "samsung,exynos3250", "samsung,exynos4", "samsung,exynos4210", "samsung,exynos4212", "samsung,exynos4412", "samsung,exynos5", "samsung,exynos5250", + "samsung,exynos5260", "samsung,exynos5420", "samsung,exynos5440", NULL diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index f6cb510aee85..eb91d2350f8c 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -30,6 +30,13 @@ static int exynos_do_idle(void) static int exynos_cpu_boot(int cpu) { /* + * Exynos3250 doesn't need to send smc command for secondary CPU boot + * because Exynos3250 removes WFE in secure mode. + */ + if (soc_is_exynos3250()) + return 0; + + /* * The second parameter of SMC_CMD_CPU1BOOT command means CPU id. * But, Exynos4212 has only one secondary CPU so second parameter * isn't used for informing secure firmware about CPU id. @@ -43,9 +50,14 @@ static int exynos_cpu_boot(int cpu) static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) { - void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c; + void __iomem *boot_reg; + + if (!sysram_ns_base_addr) + return -ENODEV; + + boot_reg = sysram_ns_base_addr + 0x1c; - if (!soc_is_exynos4212()) + if (!soc_is_exynos4212() && !soc_is_exynos3250()) boot_reg += 4*cpu; __raw_writel(boot_addr, boot_reg); diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 3cab3f506689..69fa48397394 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -44,7 +44,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) /* make cpu1 to be turned off at next WFI command */ if (cpu == 1) - __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + exynos_cpu_power_down(cpu); /* * here's the WFI diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 7b046b59d9ec..548269a60634 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -23,13 +23,6 @@ #include <plat/map-s5p.h> -#define EXYNOS4_PA_SYSRAM0 0x02025000 -#define EXYNOS4_PA_SYSRAM1 0x02020000 -#define EXYNOS5_PA_SYSRAM 0x02020000 -#define EXYNOS4210_PA_SYSRAM_NS 0x0203F000 -#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000 -#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000 - #define EXYNOS_PA_CHIPID 0x10000000 #define EXYNOS4_PA_SYSCON 0x10010000 diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c new file mode 100644 index 000000000000..0498d0b887ef --- /dev/null +++ b/arch/arm/mach-exynos/mcpm-exynos.c @@ -0,0 +1,357 @@ +/* + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * arch/arm/mach-exynos/mcpm-exynos.c + * + * Based on arch/arm/mach-vexpress/dcscb.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/arm-cci.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/of_address.h> + +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/mcpm.h> + +#include "regs-pmu.h" +#include "common.h" + +#define EXYNOS5420_CPUS_PER_CLUSTER 4 +#define EXYNOS5420_NR_CLUSTERS 2 +#define MCPM_BOOT_ADDR_OFFSET 0x1c + +/* + * The common v7_exit_coherency_flush API could not be used because of the + * Erratum 799270 workaround. This macro is the same as the common one (in + * arch/arm/include/asm/cacheflush.h) except for the erratum handling. + */ +#define exynos_v7_exit_coherency_flush(level) \ + asm volatile( \ + "stmfd sp!, {fp, ip}\n\t"\ + "mrc p15, 0, r0, c1, c0, 0 @ get SCTLR\n\t" \ + "bic r0, r0, #"__stringify(CR_C)"\n\t" \ + "mcr p15, 0, r0, c1, c0, 0 @ set SCTLR\n\t" \ + "isb\n\t"\ + "bl v7_flush_dcache_"__stringify(level)"\n\t" \ + "clrex\n\t"\ + "mrc p15, 0, r0, c1, c0, 1 @ get ACTLR\n\t" \ + "bic r0, r0, #(1 << 6) @ disable local coherency\n\t" \ + /* Dummy Load of a device register to avoid Erratum 799270 */ \ + "ldr r4, [%0]\n\t" \ + "and r4, r4, #0\n\t" \ + "orr r0, r0, r4\n\t" \ + "mcr p15, 0, r0, c1, c0, 1 @ set ACTLR\n\t" \ + "isb\n\t" \ + "dsb\n\t" \ + "ldmfd sp!, {fp, ip}" \ + : \ + : "Ir" (S5P_INFORM0) \ + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ + "r9", "r10", "lr", "memory") + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t exynos_mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED; +static int +cpu_use_count[EXYNOS5420_CPUS_PER_CLUSTER][EXYNOS5420_NR_CLUSTERS]; + +#define exynos_cluster_usecnt(cluster) \ + (cpu_use_count[0][cluster] + \ + cpu_use_count[1][cluster] + \ + cpu_use_count[2][cluster] + \ + cpu_use_count[3][cluster]) + +#define exynos_cluster_unused(cluster) !exynos_cluster_usecnt(cluster) + +static int exynos_cluster_power_control(unsigned int cluster, int enable) +{ + unsigned int tries = 100; + unsigned int val; + + if (enable) { + exynos_cluster_power_up(cluster); + val = S5P_CORE_LOCAL_PWR_EN; + } else { + exynos_cluster_power_down(cluster); + val = 0; + } + + /* Wait until cluster power control is applied */ + while (tries--) { + if (exynos_cluster_power_state(cluster) == val) + return 0; + + cpu_relax(); + } + pr_debug("timed out waiting for cluster %u to power %s\n", cluster, + enable ? "on" : "off"); + + return -ETIMEDOUT; +} + +static int exynos_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + int err = 0; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&exynos_mcpm_lock); + + cpu_use_count[cpu][cluster]++; + if (cpu_use_count[cpu][cluster] == 1) { + bool was_cluster_down = + (exynos_cluster_usecnt(cluster) == 1); + + /* + * Turn on the cluster (L2/COMMON) and then power on the + * cores. + */ + if (was_cluster_down) + err = exynos_cluster_power_control(cluster, 1); + + if (!err) + exynos_cpu_power_up(cpunr); + else + exynos_cluster_power_control(cluster, 0); + } else if (cpu_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&exynos_mcpm_lock); + local_irq_enable(); + + return err; +} + +/* + * NOTE: This function requires the stack data to be visible through power down + * and can only be executed on processors like A15 and A7 that hit the cache + * with the C bit clear in the SCTLR register. + */ +static void exynos_power_down(void) +{ + unsigned int mpidr, cpu, cluster; + bool last_man = false, skip_wfi = false; + unsigned int cpunr; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&exynos_mcpm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + cpu_use_count[cpu][cluster]--; + if (cpu_use_count[cpu][cluster] == 0) { + exynos_cpu_power_down(cpunr); + + if (exynos_cluster_unused(cluster)) + /* TODO: Turn off the cluster here to save power. */ + last_man = true; + } else if (cpu_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else { + BUG(); + } + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&exynos_mcpm_lock); + + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A15) { + /* + * On the Cortex-A15 we need to disable + * L2 prefetching before flushing the cache. + */ + asm volatile( + "mcr p15, 1, %0, c15, c0, 3\n\t" + "isb\n\t" + "dsb" + : : "r" (0x400)); + } + + /* Flush all cache levels for this cluster. */ + exynos_v7_exit_coherency_flush(all); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&exynos_mcpm_lock); + + /* Disable and flush the local CPU cache. */ + exynos_v7_exit_coherency_flush(louis); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static int exynos_wait_for_powerdown(unsigned int cpu, unsigned int cluster) +{ + unsigned int tries = 100; + unsigned int cpunr = cpu + (cluster * EXYNOS5420_CPUS_PER_CLUSTER); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + /* Wait for the core state to be OFF */ + while (tries--) { + if (ACCESS_ONCE(cpu_use_count[cpu][cluster]) == 0) { + if ((exynos_cpu_power_state(cpunr) == 0)) + return 0; /* success: the CPU is halted */ + } + + /* Otherwise, wait and retry: */ + msleep(1); + } + + return -ETIMEDOUT; /* timeout */ +} + +static const struct mcpm_platform_ops exynos_power_ops = { + .power_up = exynos_power_up, + .power_down = exynos_power_down, + .wait_for_powerdown = exynos_wait_for_powerdown, +}; + +static void __init exynos_mcpm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= EXYNOS5420_CPUS_PER_CLUSTER || + cluster >= EXYNOS5420_NR_CLUSTERS); + + cpu_use_count[cpu][cluster] = 1; +} + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + */ +static void __naked exynos_pm_power_up_setup(unsigned int affinity_level) +{ + asm volatile ("\n" + "cmp r0, #1\n" + "bxne lr\n" + "b cci_enable_port_for_self"); +} + +static const struct of_device_id exynos_dt_mcpm_match[] = { + { .compatible = "samsung,exynos5420" }, + { .compatible = "samsung,exynos5800" }, + {}, +}; + +static int __init exynos_mcpm_init(void) +{ + struct device_node *node; + void __iomem *ns_sram_base_addr; + int ret; + + node = of_find_matching_node(NULL, exynos_dt_mcpm_match); + if (!node) + return -ENODEV; + of_node_put(node); + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, + "samsung,exynos4210-sysram-ns"); + if (!node) + return -ENODEV; + + ns_sram_base_addr = of_iomap(node, 0); + of_node_put(node); + if (!ns_sram_base_addr) { + pr_err("failed to map non-secure iRAM base address\n"); + return -ENOMEM; + } + + /* + * To increase the stability of KFC reset we need to program + * the PMU SPARE3 register + */ + __raw_writel(EXYNOS5420_SWRESET_KFC_SEL, S5P_PMU_SPARE3); + + exynos_mcpm_usage_count_init(); + + ret = mcpm_platform_register(&exynos_power_ops); + if (!ret) + ret = mcpm_sync_init(exynos_pm_power_up_setup); + if (ret) { + iounmap(ns_sram_base_addr); + return ret; + } + + mcpm_smp_set_ops(); + + pr_info("Exynos MCPM support installed\n"); + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + __raw_writel(virt_to_phys(mcpm_entry_point), + ns_sram_base_addr + MCPM_BOOT_ADDR_OFFSET); + + iounmap(ns_sram_base_addr); + + return ret; +} + +early_initcall(exynos_mcpm_init); diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index c28cdb1c82cd..112bc66927a1 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -20,6 +20,7 @@ #include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -31,11 +32,33 @@ extern void exynos4_secondary_startup(void); +static void __iomem *sysram_base_addr; +void __iomem *sysram_ns_base_addr; + +static void __init exynos_smp_prepare_sysram(void) +{ + struct device_node *node; + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") { + if (!of_device_is_available(node)) + continue; + sysram_base_addr = of_iomap(node, 0); + break; + } + + for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram-ns") { + if (!of_device_is_available(node)) + continue; + sysram_ns_base_addr = of_iomap(node, 0); + break; + } +} + static inline void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return S5P_INFORM5; - return S5P_VA_SYSRAM; + return sysram_base_addr; } static inline void __iomem *cpu_boot_reg(int cpu) @@ -43,9 +66,11 @@ static inline void __iomem *cpu_boot_reg(int cpu) void __iomem *boot_reg; boot_reg = cpu_boot_reg_base(); + if (!boot_reg) + return ERR_PTR(-ENODEV); if (soc_is_exynos4412()) boot_reg += 4*cpu; - else if (soc_is_exynos5420()) + else if (soc_is_exynos5420() || soc_is_exynos5800()) boot_reg += 4; return boot_reg; } @@ -88,6 +113,7 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; unsigned long phys_cpu = cpu_logical_map(cpu); + int ret = -ENOSYS; /* * Set synchronisation state between this boot processor @@ -105,15 +131,12 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(phys_cpu); - if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { - __raw_writel(S5P_CORE_LOCAL_PWR_EN, - S5P_ARM_CORE1_CONFIGURATION); - + if (!exynos_cpu_power_state(cpu)) { + exynos_cpu_power_up(cpu); timeout = 10; /* wait max 10 ms until cpu1 is on */ - while ((__raw_readl(S5P_ARM_CORE1_STATUS) - & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + while (exynos_cpu_power_state(cpu) != S5P_CORE_LOCAL_PWR_EN) { if (timeout-- == 0) break; @@ -144,8 +167,18 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } call_firmware_op(cpu_boot, phys_cpu); @@ -161,9 +194,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ +fail: spin_unlock(&boot_lock); - return pen_release != -1 ? -ENOSYS : 0; + return pen_release != -1 ? ret : 0; } /* @@ -203,6 +237,8 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) scu_enable(scu_base_addr()); + exynos_smp_prepare_sysram(); + /* * Write the address of secondary startup into the * system-wide flags register. The boot monitor waits @@ -215,12 +251,21 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) for (i = 1; i < max_cpus; ++i) { unsigned long phys_cpu; unsigned long boot_addr; + int ret; phys_cpu = cpu_logical_map(i); boot_addr = virt_to_phys(exynos4_secondary_startup); - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) + ret = call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr); + if (ret && ret != -ENOSYS) + break; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(phys_cpu); + + if (IS_ERR(boot_reg)) + break; __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + } } } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index ca672e24b5cd..aba2ff6e443d 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -99,6 +99,72 @@ static int exynos_irq_set_wake(struct irq_data *data, unsigned int state) return -ENOENT; } +/** + * exynos_core_power_down : power down the specified cpu + * @cpu : the cpu to power down + * + * Power down the specified cpu. The sequence must be finished by a + * call to cpu_do_idle() + * + */ +void exynos_cpu_power_down(int cpu) +{ + __raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_up : power up the specified cpu + * @cpu : the cpu to power up + * + * Power up the specified cpu + */ +void exynos_cpu_power_up(int cpu) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_ARM_CORE_CONFIGURATION(cpu)); +} + +/** + * exynos_cpu_power_state : returns the power state of the cpu + * @cpu : the cpu to retrieve the power state from + * + */ +int exynos_cpu_power_state(int cpu) +{ + return (__raw_readl(EXYNOS_ARM_CORE_STATUS(cpu)) & + S5P_CORE_LOCAL_PWR_EN); +} + +/** + * exynos_cluster_power_down : power down the specified cluster + * @cluster : the cluster to power down + */ +void exynos_cluster_power_down(int cluster) +{ + __raw_writel(0, EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_up : power up the specified cluster + * @cluster : the cluster to power up + */ +void exynos_cluster_power_up(int cluster) +{ + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + EXYNOS_COMMON_CONFIGURATION(cluster)); +} + +/** + * exynos_cluster_power_state : returns the power state of the cluster + * @cluster : the cluster to retrieve the power state from + * + */ +int exynos_cluster_power_state(int cluster) +{ + return (__raw_readl(EXYNOS_COMMON_STATUS(cluster)) & + S5P_CORE_LOCAL_PWR_EN); +} + /* For Cortex-A9 Diagnostic and Power control register */ static unsigned int save_arm_register[2]; diff --git a/arch/arm/mach-exynos/regs-pmu.h b/arch/arm/mach-exynos/regs-pmu.h index 4f6a2560d022..4179f6a6d595 100644 --- a/arch/arm/mach-exynos/regs-pmu.h +++ b/arch/arm/mach-exynos/regs-pmu.h @@ -38,6 +38,7 @@ #define S5P_INFORM5 S5P_PMUREG(0x0814) #define S5P_INFORM6 S5P_PMUREG(0x0818) #define S5P_INFORM7 S5P_PMUREG(0x081C) +#define S5P_PMU_SPARE3 S5P_PMUREG(0x090C) #define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000) #define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004) @@ -105,8 +106,17 @@ #define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) -#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080) -#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084) +#define EXYNOS_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000) +#define EXYNOS_ARM_CORE_CONFIGURATION(_nr) \ + (EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_ARM_CORE_STATUS(_nr) \ + (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4) + +#define EXYNOS_ARM_COMMON_CONFIGURATION S5P_PMUREG(0x2500) +#define EXYNOS_COMMON_CONFIGURATION(_nr) \ + (EXYNOS_ARM_COMMON_CONFIGURATION + (0x80 * (_nr))) +#define EXYNOS_COMMON_STATUS(_nr) \ + (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x4) #define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028) #define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108) @@ -313,4 +323,6 @@ #define EXYNOS5_OPTION_USE_RETENTION (1 << 4) +#define EXYNOS5420_SWRESET_KFC_SEL 0x3 + #endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 50bb546b893a..8d42eab76d53 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -702,61 +702,6 @@ endif if ARCH_MULTI_V7 -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - select SOC_IMX51 - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - comment "Device tree only" config SOC_IMX50 @@ -768,6 +713,12 @@ config SOC_IMX50 help This enables support for Freescale i.MX50 processor. +config MACH_IMX51_DT + bool "i.MX51 support" + select SOC_IMX51 + help + This enables support for Freescale i.MX51 processor + config SOC_IMX53 bool "i.MX53 support" select HAVE_IMX_SRC @@ -811,6 +762,14 @@ config SOC_IMX6SL help This enables support for Freescale i.MX6 SoloLite processor. +config SOC_IMX6SX + bool "i.MX6 SoloX support" + select PINCTRL_IMX6SX + select SOC_IMX6 + + help + This enables support for Freescale i.MX6 SoloX processor. + config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f4ed83032dd0..bbe93bbfd003 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o ifeq ($(CONFIG_SUSPEND),y) AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a @@ -108,11 +109,6 @@ obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o -# i.MX5 based machines -obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o - obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 8d1df2e4b7ac..24b103c67f82 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -135,7 +135,7 @@ static __init void avic_init_gc(int idx, unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -asmlinkage void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) +static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs) { u32 nivector; @@ -190,6 +190,8 @@ void __init mxc_init_irq(void __iomem *irqbase) for (i = 0; i < 8; i++) __raw_writel(0, avic_base + AVIC_NIPRIORITY(i)); + set_handle_irq(avic_handle_irq); + #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(FIQ_START); diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c index a2ecc006b322..4ba587da89d2 100644 --- a/arch/arm/mach-imx/clk-gate2.c +++ b/arch/arm/mach-imx/clk-gate2.c @@ -27,48 +27,61 @@ * parent - fixed parent. No clk_set_parent support */ -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) +struct clk_gate2 { + struct clk_hw hw; + void __iomem *reg; + u8 bit_idx; + u8 flags; + spinlock_t *lock; + unsigned int *share_count; +}; + +#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw) static int clk_gate2_enable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); u32 reg; unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + spin_lock_irqsave(gate->lock, flags); + + if (gate->share_count && (*gate->share_count)++ > 0) + goto out; reg = readl(gate->reg); reg |= 3 << gate->bit_idx; writel(reg, gate->reg); - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); +out: + spin_unlock_irqrestore(gate->lock, flags); return 0; } static void clk_gate2_disable(struct clk_hw *hw) { - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); u32 reg; unsigned long flags = 0; - if (gate->lock) - spin_lock_irqsave(gate->lock, flags); + spin_lock_irqsave(gate->lock, flags); + + if (gate->share_count && --(*gate->share_count) > 0) + goto out; reg = readl(gate->reg); reg &= ~(3 << gate->bit_idx); writel(reg, gate->reg); - if (gate->lock) - spin_unlock_irqrestore(gate->lock, flags); +out: + spin_unlock_irqrestore(gate->lock, flags); } static int clk_gate2_is_enabled(struct clk_hw *hw) { u32 reg; - struct clk_gate *gate = to_clk_gate(hw); + struct clk_gate2 *gate = to_clk_gate2(hw); reg = readl(gate->reg); @@ -87,21 +100,23 @@ static struct clk_ops clk_gate2_ops = { struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, - u8 clk_gate2_flags, spinlock_t *lock) + u8 clk_gate2_flags, spinlock_t *lock, + unsigned int *share_count) { - struct clk_gate *gate; + struct clk_gate2 *gate; struct clk *clk; struct clk_init_data init; - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL); if (!gate) return ERR_PTR(-ENOMEM); - /* struct clk_gate assignments */ + /* struct clk_gate2 assignments */ gate->reg = reg; gate->bit_idx = bit_idx; gate->flags = clk_gate2_flags; gate->lock = lock; + gate->share_count = share_count; init.name = name; init.ops = &clk_gate2_ops; diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 15f9d223cf0b..7f739be3de2c 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -40,12 +40,14 @@ #define SCM_GCCR IO_ADDR_SCM(0xc) static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", }; -static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem", - "fclk", }; +static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", + "prem", "fclk", }; + enum imx1_clks { - dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu, - fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate, - mma_gate, usbd_gate, clk_max + dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, mpll_gate, + spll, spll_gate, mcu, fclk, hclk, clk48m, per1, per2, per3, clko, + uart3_gate, ssi2_gate, brom_gate, dma_gate, csi_gate, mma_gate, + usbd_gate, clk_max }; static struct clk *clk[clk_max]; @@ -62,17 +64,22 @@ int __init mx1_clocks_init(unsigned long fref) clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks)); clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0); + clk[mpll_gate] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0); clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0); + clk[spll_gate] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1); - clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1); - clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4); - clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3); - clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4); - clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4); - clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7); + clk[fclk] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1); + clk[hclk] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4); + clk[clk48m] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3); + clk[per1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4); + clk[per2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4); + clk[per3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7); clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); - clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4); + clk[uart3_gate] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6); + clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5); + clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4); + clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3); clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2); clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1); clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0); @@ -84,9 +91,6 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[dma_gate], "ahb", "imx1-dma"); clk_register_clkdev(clk[hclk], "ipg", "imx1-dma"); - clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0"); - clk_register_clkdev(clk[mma_gate], "mma", NULL); - clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0"); clk_register_clkdev(clk[per1], "per", "imx-gpt.0"); clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[per1], "per", "imx1-uart.0"); @@ -94,20 +98,15 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1], "per", "imx1-uart.1"); clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1"); clk_register_clkdev(clk[per1], "per", "imx1-uart.2"); - clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2"); + clk_register_clkdev(clk[uart3_gate], "ipg", "imx1-uart.2"); clk_register_clkdev(clk[hclk], NULL, "imx1-i2c.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0"); clk_register_clkdev(clk[per2], "per", "imx1-cspi.1"); clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1"); - clk_register_clkdev(clk[per2], NULL, "imx-mmc.0"); clk_register_clkdev(clk[per2], "per", "imx1-fb.0"); clk_register_clkdev(clk[dummy], "ipg", "imx1-fb.0"); clk_register_clkdev(clk[dummy], "ahb", "imx1-fb.0"); - clk_register_clkdev(clk[hclk], "mshc", NULL); - clk_register_clkdev(clk[per3], "ssi", NULL); - clk_register_clkdev(clk[clk32], NULL, "imx1-rtc.0"); - clk_register_clkdev(clk[clko], "clko", NULL); mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index dc36e6c2f1da..ae578c096ad8 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -62,6 +62,10 @@ static struct clk_onecell_data clk_data; static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", }; static const char *per_sel_clks[] = { "ahb", "upll", }; +static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb", + "ipg", "dummy", "dummy", "dummy", + "dummy", "dummy", "per0", "per2", + "per13", "per14", "usbotg_ahb", "dummy",}; enum mx25_clks { dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg, @@ -82,7 +86,7 @@ enum mx25_clks { pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg, sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17, - wdt_ipg, clk_max + wdt_ipg, cko_div, cko_sel, cko, clk_max }; static struct clk *clk[clk_max]; @@ -117,6 +121,9 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); + clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6); + clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks)); + clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30); clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6); clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6); clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6); @@ -230,6 +237,12 @@ static int __init __mx25_clocks_init(unsigned long osc_rate) clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); + /* + * Let's initially set up CLKO parent as ipg, since this configuration + * is used on some imx25 board designs to clock the audio codec. + */ + clk_set_parent(clk[cko_sel], clk[ipg]); + return 0; } @@ -304,8 +317,6 @@ int __init mx25_clocks_init(void) int __init mx25_clocks_init_dt(void) { struct device_node *np; - void __iomem *base; - int irq; unsigned long osc_rate = 24000000; /* retrieve the freqency of fixed clocks from device tree */ @@ -325,12 +336,7 @@ int __init mx25_clocks_init_dt(void) __mx25_clocks_init(osc_rate); - np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt")); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index d2da8908b268..317a662626d6 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -82,7 +82,8 @@ enum mx27_clks { csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate, uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate, uart2_ipg_gate, uart1_ipg_gate, ckih_div1p5, fpm, mpll_osc_sel, - mpll_sel, spll_gate, clk_max + mpll_sel, spll_gate, mshc_div, rtic_ipg_gate, mshc_ipg_gate, + rtic_ahb_gate, mshc_baud_gate, clk_max }; static struct clk *clk[clk_max]; @@ -117,6 +118,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1); } + clk[mshc_div] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6); clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4); clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6); clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6); @@ -145,9 +147,11 @@ int __init mx27_clocks_init(unsigned long fref) clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5); clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6); clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7); + clk[rtic_ipg_gate] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8); clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9); clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11); clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12); + clk[mshc_ipg_gate] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13); clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14); clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15); clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16); @@ -166,6 +170,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29); clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30); clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31); + clk[mshc_baud_gate] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2); clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3); clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4); clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5); @@ -177,6 +182,7 @@ int __init mx27_clocks_init(unsigned long fref) clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11); clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12); clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13); + clk[rtic_ahb_gate] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14); clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15); clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16); clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17); @@ -221,16 +227,6 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5"); clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1"); - clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2"); - clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3"); - clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4"); - clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5"); - clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.0"); clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "imx21-mmc.0"); clk_register_clkdev(clk[per2_gate], "per", "imx21-mmc.1"); @@ -278,14 +274,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "imx27-camera.0"); clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0"); clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0"); - clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL); - clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); - clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); - clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], NULL, "imx21-rtc"); - clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], NULL, "cpu0"); - clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); @@ -296,7 +285,6 @@ int __init mx27_clocks_init(unsigned long fref) return 0; } -#ifdef CONFIG_OF int __init mx27_clocks_init_dt(void) { struct device_node *np; @@ -312,4 +300,3 @@ int __init mx27_clocks_init_dt(void) return mx27_clocks_init(fref); } -#endif diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index b5b65f3efaf1..4a9de0835eb1 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -191,7 +191,6 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } -#ifdef CONFIG_OF int __init mx31_clocks_init_dt(void) { struct device_node *np; @@ -207,4 +206,3 @@ int __init mx31_clocks_init_dt(void) return mx31_clocks_init(fref); } -#endif diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 568ef0a4de84..21d2b111c83d 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -322,9 +322,8 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, static void __init mx50_clocks_init(struct device_node *np) { - void __iomem *base; unsigned long r; - int i, irq; + int i; clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -372,11 +371,7 @@ static void __init mx50_clocks_init(struct device_node *np) r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); - np = of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx50-gpt")); } CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init); @@ -436,7 +431,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[IMX5_CLK_HSI2C_GATE], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[IMX5_CLK_MX51_MIPI], "mipi_hsp", NULL); - clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx27-fec.0"); clk_register_clkdev(clk[IMX5_CLK_USB_PHY_GATE], "phy", "mxc-ehci.0"); clk_register_clkdev(clk[IMX5_CLK_ESDHC1_IPG_GATE], "ipg", "sdhci-esdhc-imx51.0"); @@ -492,9 +486,8 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt); static void __init mx53_clocks_init(struct device_node *np) { - int i, irq; + int i; unsigned long r; - void __iomem *base; clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE); clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE); @@ -561,7 +554,6 @@ static void __init mx53_clocks_init(struct device_node *np) mx5_clocks_common_init(0, 0, 0, 0); - clk_register_clkdev(clk[IMX5_CLK_VPU_GATE], NULL, "imx53-vpu.0"); clk_register_clkdev(clk[IMX5_CLK_I2C3_GATE], NULL, "imx21-i2c.2"); clk_register_clkdev(clk[IMX5_CLK_FEC_GATE], NULL, "imx25-fec.0"); clk_register_clkdev(clk[IMX5_CLK_USB_PHY1_GATE], "usb_phy1", "mxc-ehci.0"); @@ -592,10 +584,6 @@ static void __init mx53_clocks_init(struct device_node *np) r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); - np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt")); } CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 2b4d6acfa34a..8e795dea02ec 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -107,7 +107,7 @@ enum mx6q_clks { sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate, usbphy2_gate, pll4_post_div, pll5_post_div, pll5_video_div, eim_slow, spdif, cko2_sel, cko2_podf, cko2, cko, vdoa, pll4_audio_div, - lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, clk_max + lvds1_sel, lvds2_sel, lvds1_gate, lvds2_gate, esai_ahb, clk_max }; static struct clk *clk[clk_max]; @@ -140,11 +140,13 @@ static struct clk_div_table video_div_table[] = { { /* sentinel */ } }; +static unsigned int share_count_esai; + static void __init imx6q_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int i, irq; + int i; int ret; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -352,9 +354,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); - clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); + if (cpu_is_imx6dl()) + /* ecspi5 is replaced with i2c4 on imx6dl & imx6s */ + clk[ecspi5] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8); + else + clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16); + clk[esai] = imx_clk_gate2_shared("esai", "esai_podf", base + 0x6c, 16, &share_count_esai); + clk[esai_ahb] = imx_clk_gate2_shared("esai_ahb", "ahb", base + 0x6c, 16, &share_count_esai); clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); if (cpu_is_imx6dl()) @@ -489,10 +496,6 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) /* Set initial power mode */ imx6q_set_lpm(WAIT_CLOCKED); - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt")); } CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c index f7073c0782fb..21cf06cebade 100644 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ b/arch/arm/mach-imx/clk-imx6sl.c @@ -169,7 +169,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) { struct device_node *np; void __iomem *base; - int irq; int i; int ret; @@ -385,9 +384,6 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node) imx6q_set_lpm(WAIT_CLOCKED); np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt"); - base = of_iomap(np, 0); - WARN_ON(!base); - irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(base, irq); + mxc_timer_init_dt(np); } CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c new file mode 100644 index 000000000000..72f8902235d1 --- /dev/null +++ b/arch/arm/mach-imx/clk-imx6sx.c @@ -0,0 +1,524 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/clock/imx6sx-clock.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/types.h> + +#include "clk.h" +#include "common.h" + +#define CCDR 0x4 +#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) + +static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; +static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; +static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; +static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; +static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; +static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; +static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; +static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; +static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; +static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; +static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", }; +static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", }; +static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; +static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; +static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; +static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *pcie_axi_sels[] = { "axi", "ahb", }; +static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", }; +static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; +static const char *perclk_sels[] = { "ipg", "osc", }; +static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", }; +static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", }; +static const char *uart_sels[] = { "pll3_80m", "osc", }; +static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", }; +static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; +static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", }; +static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; +static const char *ecspi_sels[] = { "pll3_60m", "osc", }; +static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; +static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", }; +static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; +static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", }; +static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; +static const char *cko1_sels[] = { + "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", + "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix", + "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div", +}; +static const char *cko2_sels[] = { + "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck", + "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core", + "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core", + "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy", + "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial", + "spdif", "asrc", "dummy", +}; +static const char *cko_sels[] = { "cko1", "cko2", }; +static const char *lvds_sels[] = { + "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div", + "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2", +}; + +static struct clk *clks[IMX6SX_CLK_CLK_END]; +static struct clk_onecell_data clk_data; + +static int const clks_init_on[] __initconst = { + IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3, + IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3, + IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG, + IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM, + IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4, + IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG, + IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5, + IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG, + IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1, + IMX6SX_CLK_EPIT2, +}; + +static struct clk_div_table clk_enet_ref_table[] = { + { .val = 0, .div = 20, }, + { .val = 1, .div = 10, }, + { .val = 2, .div = 5, }, + { .val = 3, .div = 4, }, + { } +}; + +static struct clk_div_table post_div_table[] = { + { .val = 2, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 0, .div = 4, }, + { } +}; + +static struct clk_div_table video_div_table[] = { + { .val = 0, .div = 1, }, + { .val = 1, .div = 2, }, + { .val = 2, .div = 1, }, + { .val = 3, .div = 4, }, + { } +}; + +static u32 share_count_asrc; +static u32 share_count_audio; +static u32 share_count_esai; + +static void __init imx6sx_clocks_init(struct device_node *ccm_node) +{ + struct device_node *np; + void __iomem *base; + int i; + + clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0); + + clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); + clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); + + /* ipp_di clock is external input */ + clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); + clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); + base = of_iomap(np, 0); + WARN_ON(!base); + + /* type name parent_name base div_mask */ + clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x7f); + clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x1); + clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x3); + clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x7f); + clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x7f); + clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6_enet", "osc", base + 0xe0, 0x3); + clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host", "osc", base + 0x20, 0x3); + + /* + * Bit 20 is the reserved and read-only bit, we do this only for: + * - Do nothing for usbphy clk_enable/disable + * - Keep refcount when do usbphy clk_enable/disable, in that case, + * the clk framework may need to enable/disable usbphy's parent + */ + clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); + clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); + + /* + * usbphy*_gate needs to be on after system boots up, and software + * never needs to control it anymore. + */ + clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); + clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); + + /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */ + clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); + clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); + + clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate("lvds1_out", "lvds1_sel", base + 0x160, 10); + + clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, + base + 0xe0, 0, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0, + base + 0xe0, 2, 2, 0, clk_enet_ref_table, + &imx_ccm_lock); + clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20); + + clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20); + clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21); + + /* name parent_name reg idx */ + clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); + clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); + clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); + clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); + clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); + clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); + clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); + clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); + + /* name parent_name mult div */ + clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); + clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); + clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); + clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); + clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); + clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); + + clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", + CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", + CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", + CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); + clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", + CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); + + np = ccm_node; + base = of_iomap(np, 0); + WARN_ON(!base); + + imx6q_pm_set_ccm_base(base); + + /* name reg shift width parent_names num_parents */ + clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); + clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); + clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels)); + clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); + clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); + clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); + clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); + clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); + clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); + clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels)); + clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels)); + clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); + clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); + clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); + clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels)); + clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); + clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); + clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); + clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels)); + clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels)); + clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels)); + clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels)); + clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); + clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels)); + clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels)); + clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels)); + clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); + clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); + clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); + clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); + + clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT); + clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT); + + /* name parent_name reg shift width */ + clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); + clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); + clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); + clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3); + clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3); + clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3); + clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3); + clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3); + clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3); + clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); + clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2); + clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6); + clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); + clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); + clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); + clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); + clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); + clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); + clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); + clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); + clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); + clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); + clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); + clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3); + clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6); + clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); + clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); + clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); + clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); + clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3); + clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3); + clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3); + clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3); + clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); + clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3); + clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3); + clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3); + clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); + clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); + clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); + + clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); + clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); + + /* name reg shift width busy: reg, shift parent_names num_parents */ + clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); + clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); + /* name parent_name reg shift width busy: reg, shift */ + clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0); + clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); + clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); + clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); + + /* name parent_name reg shift */ + /* CCGR0 */ + clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); + clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); + clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); + clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); + clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); + clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8); + clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10); + clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12); + clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); + clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16); + clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); + clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20); + clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24); + clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26); + clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); + + /* CCGR1 */ + clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); + clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); + clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); + clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); + clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8); + clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); + clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); + clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); + clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18); + clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20); + clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); + clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26); + clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30); + + /* CCGR2 */ + clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2); + clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); + clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); + clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); + clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); + clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14); + clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16); + clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18); + clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20); + clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22); + clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28); + clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30); + + /* CCGR3 */ + clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2); + clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4); + clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4); + clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6); + clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8); + clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10); + clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12); + clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14); + clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18); + clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); + clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); + clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); + + /* CCGR4 */ + clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0); + clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10); + clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); + clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14); + clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); + clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); + clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); + clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); + clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); + clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); + clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28); + clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + + /* CCGR5 */ + clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); + clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); + clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); + clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); + clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18); + clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20); + clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22); + clks[IMX6SX_CLK_SSI1] = imx_clk_gate2("ssi1", "ssi1_podf", base + 0x7c, 18); + clks[IMX6SX_CLK_SSI2] = imx_clk_gate2("ssi2", "ssi2_podf", base + 0x7c, 20); + clks[IMX6SX_CLK_SSI3] = imx_clk_gate2("ssi3", "ssi3_podf", base + 0x7c, 22); + clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); + clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26); + clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28); + clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30); + clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28); + clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30); + + /* CCGR6 */ + clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); + clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); + clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); + clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); + clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); + clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); + clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16); + clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20); + clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22); + clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24); + clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26); + clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28); + clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30); + + clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); + clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); + + /* mask handshake of mmdc */ + writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); + + for (i = 0; i < ARRAY_SIZE(clks); i++) + if (IS_ERR(clks[i])) + pr_err("i.MX6sx clk %d: register failed with %ld\n", i, PTR_ERR(clks[i])); + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + clk_register_clkdev(clks[IMX6SX_CLK_GPT_BUS], "ipg", "imx-gpt.0"); + clk_register_clkdev(clks[IMX6SX_CLK_GPT_SERIAL], "per", "imx-gpt.0"); + + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clks[clks_init_on[i]]); + + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { + clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]); + clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]); + } + + /* Set the default 132MHz for EIM module */ + clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); + clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000); + + /* set parent clock for LCDIF1 pixel clock */ + clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]); + + /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ + if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M])) + pr_err("Failed to set pcie bus parent clk.\n"); + if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI])) + pr_err("Failed to set pcie parent clk.\n"); + + /* + * Init enet system AHB clock, set to 200Mhz + * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB + */ + clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); + clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]); + clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000); + clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000); + clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000); + + /* Audio clocks */ + clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000); + + clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000); + + clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); + clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000); + + clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000); + clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000); + clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000); + + clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); + clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000); + + /* Set parent clock for vadc */ + clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); + + /* default parent of can_sel clock is invalid, manually set it here */ + clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]); + + /* Update gpu clock from default 528M to 720M */ + clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); + + /* Set initial power mode */ + imx6q_set_lpm(WAIT_CLOCKED); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-gpt"); + mxc_timer_init_dt(np); +} +CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 048c5ad8a80b..e29f6ebe9f39 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -28,7 +28,8 @@ struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, struct clk *clk_register_gate2(struct device *dev, const char *name, const char *parent_name, unsigned long flags, void __iomem *reg, u8 bit_idx, - u8 clk_gate_flags, spinlock_t *lock); + u8 clk_gate_flags, spinlock_t *lock, + unsigned int *share_count); struct clk * imx_obtain_fixed_clock( const char *name, unsigned long rate); @@ -37,7 +38,15 @@ static inline struct clk *imx_clk_gate2(const char *name, const char *parent, void __iomem *reg, u8 shift) { return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, 0, &imx_ccm_lock); + shift, 0, &imx_ccm_lock, NULL); +} + +static inline struct clk *imx_clk_gate2_shared(const char *name, + const char *parent, void __iomem *reg, u8 shift, + unsigned int *share_count) +{ + return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, + shift, 0, &imx_ccm_lock, share_count); } struct clk *imx_clk_pfd(const char *name, const char *parent_name, diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index b5241ea76706..9ab785ce13e8 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -17,6 +17,7 @@ struct irq_data; struct platform_device; struct pt_regs; struct clk; +struct device_node; enum mxc_cpu_pwr_mode; void mx1_map_io(void); @@ -56,6 +57,7 @@ void imx51_init_late(void); void imx53_init_late(void); void epit_timer_init(void __iomem *base, int irq); void mxc_timer_init(void __iomem *, int); +void mxc_timer_init_dt(struct device_node *); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx25_clocks_init(void); @@ -99,19 +101,6 @@ enum mx3_cpu_pwr_mode { void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); void imx_print_silicon_rev(const char *cpu, int srev); -void avic_handle_irq(struct pt_regs *); -void tzic_handle_irq(struct pt_regs *); - -#define imx1_handle_irq avic_handle_irq -#define imx21_handle_irq avic_handle_irq -#define imx25_handle_irq avic_handle_irq -#define imx27_handle_irq avic_handle_irq -#define imx31_handle_irq avic_handle_irq -#define imx35_handle_irq avic_handle_irq -#define imx50_handle_irq tzic_handle_irq -#define imx51_handle_irq tzic_handle_irq -#define imx53_handle_irq tzic_handle_irq - void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); u32 imx_get_cpu_arg(int cpu); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index ba3b498a67ec..bbe8ff1f0412 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -111,6 +111,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6DL: soc_id = "i.MX6DL"; break; + case MXC_CPU_IMX6SX: + soc_id = "i.MX6SX"; + break; case MXC_CPU_IMX6Q: soc_id = "i.MX6Q"; break; diff --git a/arch/arm/mach-imx/devices/platform-mx2-emma.c b/arch/arm/mach-imx/devices/platform-mx2-emma.c index 11bd01d402f2..0dc0651825b1 100644 --- a/arch/arm/mach-imx/devices/platform-mx2-emma.c +++ b/arch/arm/mach-imx/devices/platform-mx2-emma.c @@ -12,7 +12,7 @@ #define imx_mx2_emmaprp_data_entry_single(soc) \ { \ .iobase = soc ## _EMMAPRP_BASE_ADDR, \ - .iosize = SZ_32, \ + .iosize = SZ_256, \ .irq = soc ## _INT_EMMAPRP, \ } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c deleted file mode 100644 index 9be6c1e69d68..000000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <video/platform_lcd.h> -#include <linux/backlight.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -static iomux_v3_cfg_t eukrea_mbimxsd51_pads[] = { - /* LED */ - MX51_PAD_NANDF_D10__GPIO3_30, - /* SWITCH */ - NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - /* UART 3 */ - MX51_PAD_UART3_RXD__UART3_RXD, - MX51_PAD_UART3_TXD__UART3_TXD, - MX51_PAD_KEY_COL4__UART3_RTS, - MX51_PAD_KEY_COL5__UART3_CTS, - /* SD */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - /* SD1 CD */ - NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - /* SSI */ - MX51_PAD_AUD3_BB_TXD__AUD3_TXD, - MX51_PAD_AUD3_BB_RXD__AUD3_RXD, - MX51_PAD_AUD3_BB_CK__AUD3_TXC, - MX51_PAD_AUD3_BB_FS__AUD3_TXFS, - /* LCD Backlight */ - MX51_PAD_DI1_D1_CS__GPIO3_4, - /* LCD RST */ - MX51_PAD_CSI1_D9__GPIO3_13, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 30) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 31) -#define GPIO_LCDRST IMX_GPIO_NR(3, 13) -#define GPIO_LCDBL IMX_GPIO_NR(3, 4) - -static void eukrea_mbimxsd51_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDRST, 1); - else - gpio_direction_output(GPIO_LCDRST, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd51_lcd_power_data = { - .set_power = eukrea_mbimxsd51_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd51_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd51_lcd_power_data, -}; - -static void eukrea_mbimxsd51_bl_set_intensity(int intensity) -{ - if (intensity) - gpio_direction_output(GPIO_LCDBL, 1); - else - gpio_direction_output(GPIO_LCDBL, 0); -} - -static struct generic_bl_info eukrea_mbimxsd51_bl_info = { - .name = "eukrea_mbimxsd51-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = eukrea_mbimxsd51_bl_set_intensity, -}; - -static struct platform_device eukrea_mbimxsd51_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = &eukrea_mbimxsd51_bl_info, - }, -}; - -static const struct gpio_led eukrea_mbimxsd51_leds[] __initconst = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd51_led_info __initconst = { - .leds = eukrea_mbimxsd51_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd51_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd51_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd51_button_data __initconst = { - .buttons = eukrea_mbimxsd51_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd51_gpio_buttons), -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd51_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd51_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static int screen_type; - -static int __init eukrea_mbimxsd51_screen_type(char *options) -{ - if (!strcmp(options, "dvi")) - screen_type = 1; - else if (!strcmp(options, "tft")) - screen_type = 0; - - return 0; -} -__setup("screen_type=", eukrea_mbimxsd51_screen_type); - -/* - * system init for baseboard usage. Will be called by cpuimx51sd init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd51_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd51_pads, - ARRAY_SIZE(eukrea_mbimxsd51_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - imx51_add_sdhci_esdhc_imx(0, NULL); - - imx51_add_imx_ssi(0, &eukrea_mbimxsd51_ssi_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDRST, "LCDRST"); - gpio_direction_output(GPIO_LCDRST, 0); - gpio_request(GPIO_LCDBL, "LCDBL"); - gpio_direction_output(GPIO_LCDBL, 0); - if (!screen_type) { - platform_device_register(&eukrea_mbimxsd51_bl_dev); - platform_device_register(&eukrea_mbimxsd51_lcd_powerdev); - } else { - gpio_free(GPIO_LCDRST); - gpio_free(GPIO_LCDBL); - } - - i2c_register_board_info(0, eukrea_mbimxsd51_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd51_i2c_devices)); - - gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c index 3e1ec5ffe630..42a65e067443 100644 --- a/arch/arm/mach-imx/imx25-dt.c +++ b/arch/arm/mach-imx/imx25-dt.c @@ -38,7 +38,6 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = imx25_timer_init, .init_machine = imx25_dt_init, .dt_compat = imx25_dt_board_compat, diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 4e235ecb4021..17bd4058133d 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -43,7 +43,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = imx27_timer_init, .init_machine = imx27_dt_init, .dt_compat = imx27_dt_board_compat, diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index e1e70ef7bc2d..581f4d6c9b8a 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -39,7 +39,6 @@ DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = imx31_dt_timer_init, .init_machine = imx31_dt_init, .dt_compat = imx31_dt_board_compat, diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index 9d48e0065a63..a62854c59240 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -43,7 +43,6 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = imx35_irq_init, - .handle_irq = imx35_handle_irq, .init_machine = imx35_dt_init, .dt_compat = imx35_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 0230d78d1413..b8cd968faa52 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -38,7 +38,6 @@ DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .map_io = mx51_map_io, .init_early = imx51_init_early, .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 067580b2969b..ebbb5ab63529 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -142,7 +142,6 @@ MACHINE_START(APF9328, "Armadeus APF9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = apf9328_timer_init, .init_machine = apf9328_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 58b864a3fc20..39406b7e3228 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -562,7 +562,6 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = armadillo5x0_timer_init, .init_machine = armadillo5x0_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 2d00476f7d2c..c97d7cb39135 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -57,7 +57,6 @@ MACHINE_START(BUG, "BugLabs BUGBase") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = bug_timer_init, .init_machine = bug_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index ea50870bda80..75b7b6aa2720 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -314,7 +314,6 @@ MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = eukrea_cpuimx27_timer_init, .init_machine = eukrea_cpuimx27_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 65e4c53e1554..1ffa27169045 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -199,7 +199,6 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = eukrea_cpuimx35_timer_init, .init_machine = eukrea_cpuimx35_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c deleted file mode 100644 index 1fba2b8e983f..000000000000 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ /dev/null @@ -1,364 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard <eric@eukrea.com> - * - * based on board-mx51_babbage.c which is - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/i2c-gpio.h> -#include <linux/spi/spi.h> -#include <linux/can/platform/mcp251x.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx51.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define USBH1_RST IMX_GPIO_NR(2, 28) -#define ETH_RST IMX_GPIO_NR(2, 31) -#define TSC2007_IRQGPIO_REV2 IMX_GPIO_NR(3, 12) -#define TSC2007_IRQGPIO_REV3 IMX_GPIO_NR(4, 0) -#define CAN_IRQGPIO IMX_GPIO_NR(1, 1) -#define CAN_RST IMX_GPIO_NR(4, 15) -#define CAN_NCS IMX_GPIO_NR(4, 24) -#define CAN_RXOBF_REV2 IMX_GPIO_NR(1, 4) -#define CAN_RXOBF_REV3 IMX_GPIO_NR(3, 12) -#define CAN_RX1BF IMX_GPIO_NR(1, 6) -#define CAN_TXORTS IMX_GPIO_NR(1, 7) -#define CAN_TX1RTS IMX_GPIO_NR(1, 8) -#define CAN_TX2RTS IMX_GPIO_NR(1, 9) -#define I2C_SCL IMX_GPIO_NR(4, 16) -#define I2C_SDA IMX_GPIO_NR(4, 17) - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - MX51_PAD_USBH1_STP__USBH1_STP, - MX51_PAD_EIM_CS3__GPIO2_28, /* PHY nRESET */ - - /* FEC */ - MX51_PAD_EIM_DTACK__GPIO2_31, /* PHY nRESET */ - - /* HSI2C */ - MX51_PAD_I2C1_CLK__GPIO4_16, - MX51_PAD_I2C1_DAT__GPIO4_17, - - /* I2C1 */ - MX51_PAD_SD2_CMD__I2C1_SCL, - MX51_PAD_SD2_CLK__I2C1_SDA, - - /* CAN */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, /* nCS */ - MX51_PAD_CSI2_PIXCLK__GPIO4_15, /* nReset */ - MX51_PAD_GPIO1_1__GPIO1_1, /* IRQ */ - MX51_PAD_GPIO1_4__GPIO1_4, /* Control signals */ - MX51_PAD_GPIO1_6__GPIO1_6, - MX51_PAD_GPIO1_7__GPIO1_7, - MX51_PAD_GPIO1_8__GPIO1_8, - MX51_PAD_GPIO1_9__GPIO1_9, - - /* Touchscreen */ - /* IRQ */ - NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), - NEW_PAD_CTRL(MX51_PAD_NANDF_D8__GPIO4_0, PAD_CTL_PUS_22K_UP | - PAD_CTL_PKE | PAD_CTL_SRE_FAST | - PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS), -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int tsc2007_get_pendown_state(struct device *dev) -{ - if (mx51_revision() < IMX_CHIP_REVISION_3_0) - return !gpio_get_value(TSC2007_IRQGPIO_REV2); - else - return !gpio_get_value(TSC2007_IRQGPIO_REV3); -} - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("tsc2007", 0x49), - .platform_data = &tsc2007_info, - }, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx51sd_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, - usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx51sd_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = I2C_SDA, - .sda_is_open_drain = 0, - .scl_pin = I2C_SCL, - .scl_is_open_drain = 0, - .udelay = 2, -}; - -static struct platform_device hsi2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev.platform_data = &pdata, -}; - -static struct mcp251x_platform_data mcp251x_info = { - .oscillator_frequency = 24E6, -}; - -static struct spi_board_info cpuimx51sd_spi_device[] = { - { - .modalias = "mcp2515", - .max_speed_hz = 10000000, - .bus_num = 0, - .mode = SPI_MODE_0, - .chip_select = 0, - .platform_data = &mcp251x_info, - /* irq number is run-time assigned */ - }, -}; - -static int cpuimx51sd_spi1_cs[] = { - CAN_NCS, -}; - -static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = { - .chipselect = cpuimx51sd_spi1_cs, - .num_chipselect = ARRAY_SIZE(cpuimx51sd_spi1_cs), -}; - -static struct platform_device *rev2_platform_devices[] __initdata = { - &hsi2c_gpio_device, -}; - -static const struct imxi2c_platform_data cpuimx51sd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static void __init eukrea_cpuimx51sd_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, - ARRAY_SIZE(eukrea_cpuimx51sd_pads)); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0); - - gpio_request(ETH_RST, "eth_rst"); - gpio_set_value(ETH_RST, 1); - imx51_add_fec(NULL); - - gpio_request(CAN_IRQGPIO, "can_irq"); - gpio_direction_input(CAN_IRQGPIO); - gpio_free(CAN_IRQGPIO); - gpio_request(CAN_NCS, "can_ncs"); - gpio_direction_output(CAN_NCS, 1); - gpio_free(CAN_NCS); - gpio_request(CAN_RST, "can_rst"); - gpio_direction_output(CAN_RST, 0); - msleep(20); - gpio_set_value(CAN_RST, 1); - imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); - cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO); - spi_register_board_info(cpuimx51sd_spi_device, - ARRAY_SIZE(cpuimx51sd_spi_device)); - - if (mx51_revision() < IMX_CHIP_REVISION_3_0) { - eukrea_cpuimx51sd_i2c_devices[1].irq = - gpio_to_irq(TSC2007_IRQGPIO_REV2), - platform_add_devices(rev2_platform_devices, - ARRAY_SIZE(rev2_platform_devices)); - gpio_request(TSC2007_IRQGPIO_REV2, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO_REV2); - gpio_free(TSC2007_IRQGPIO_REV2); - } else { - eukrea_cpuimx51sd_i2c_devices[1].irq = - gpio_to_irq(TSC2007_IRQGPIO_REV3), - imx51_add_imx_i2c(0, &cpuimx51sd_i2c_data); - gpio_request(TSC2007_IRQGPIO_REV3, "tsc2007_irq"); - gpio_direction_input(TSC2007_IRQGPIO_REV3); - gpio_free(TSC2007_IRQGPIO_REV3); - } - - i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices)); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - - gpio_request(USBH1_RST, "usb_rst"); - gpio_direction_output(USBH1_RST, 0); - msleep(20); - gpio_set_value(USBH1_RST, 1); - imx51_add_mxc_ehci_hs(1, &usbh1_config); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD - eukrea_mbimxsd51_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx51sd_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD") - /* Maintainer: Eric Bénard <eric@eukrea.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_time = eukrea_cpuimx51sd_timer_init, - .init_machine = eukrea_cpuimx51sd_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 4bf454424249..e978dda1434c 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -165,7 +165,6 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = eukrea_cpuimx25_timer_init, .init_machine = eukrea_cpuimx25_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 97f9c6297fcf..b61bd8ed5568 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -604,7 +604,6 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = visstrim_m10_timer_init, .init_machine = visstrim_m10_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 1a851aea6832..bb3ca0429680 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -71,7 +71,6 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27ipcam_timer_init, .init_machine = mx27ipcam_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 3da2e3e44ce9..9992089d3ad1 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -77,7 +77,6 @@ MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27lite_timer_init, .init_machine = mx27lite_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index 77b77a92bb5d..b899c0b59afd 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -31,7 +31,6 @@ static const char *imx50_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") .map_io = mx53_map_io, .init_irq = mx53_init_irq, - .handle_irq = imx50_handle_irq, .init_machine = imx50_dt_init, .dt_compat = imx50_dt_board_compat, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 65850908a4b4..2bad387956c0 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -40,7 +40,6 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .map_io = mx53_map_io, .init_early = imx53_init_early, .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c new file mode 100644 index 000000000000..02fccf6033ac --- /dev/null +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -0,0 +1,51 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx6sx_init_machine(void) +{ + struct device *parent; + + mxc_arch_reset_init_dt(); + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + + imx_anatop_init(); +} + +static void __init imx6sx_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_init_l2cache(); + imx_src_init(); + imx_gpc_init(); + irqchip_init(); +} + +static const char *imx6sx_dt_compat[] __initconst = { + "fsl,imx6sx", + NULL, +}; + +DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)") + .map_io = debug_ll_io_init, + .init_irq = imx6sx_init_irq, + .init_machine = imx6sx_init_machine, + .dt_compat = imx6sx_dt_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index c7bc41d6b468..31df4361996f 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -289,7 +289,6 @@ MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = kzm_timer_init, .init_machine = kzm_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 9f883e4d6fc9..77fda3de4290 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -138,7 +138,6 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, @@ -149,7 +148,6 @@ MACHINE_START(MXLADS, "Freescale MXLADS") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = mx1ads_timer_init, .init_machine = mx1ads_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index a06aa4dc37fc..703ce31d7379 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -17,51 +17,46 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/physmap.h> +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> #include "common.h" #include "devices-imx21.h" #include "hardware.h" #include "iomux-mx21.h" -/* - * Memory-mapped I/O on MX21ADS base board - */ -#define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE 0xc00000 - -#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ - (MX21ADS_MMIO_BASE_ADDR + (offset)) +#define MX21ADS_CS8900A_REG (MX21_CS1_BASE_ADDR + 0x000000) +#define MX21ADS_ST16C255_IOBASE_REG (MX21_CS1_BASE_ADDR + 0x200000) +#define MX21ADS_VERSION_REG (MX21_CS1_BASE_ADDR + 0x400000) +#define MX21ADS_IO_REG (MX21_CS1_BASE_ADDR + 0x800000) -#define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) -#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) -#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) -#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) +#define MX21ADS_MMC_CD IMX_GPIO_NR(4, 25) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) +#define MX21ADS_MMGPIO_BASE (6 * 32) /* MX21ADS_IO_REG bit definitions */ -#define MX21ADS_IO_SD_WP 0x0001 /* read */ -#define MX21ADS_IO_TP6 0x0001 /* write */ -#define MX21ADS_IO_SW_SEL 0x0002 /* read */ -#define MX21ADS_IO_TP7 0x0002 /* write */ -#define MX21ADS_IO_RESET_E_UART 0x0004 -#define MX21ADS_IO_RESET_BASE 0x0008 -#define MX21ADS_IO_CSI_CTL2 0x0010 -#define MX21ADS_IO_CSI_CTL1 0x0020 -#define MX21ADS_IO_CSI_CTL0 0x0040 -#define MX21ADS_IO_UART1_EN 0x0080 -#define MX21ADS_IO_UART4_EN 0x0100 -#define MX21ADS_IO_LCDON 0x0200 -#define MX21ADS_IO_IRDA_EN 0x0400 -#define MX21ADS_IO_IRDA_FIR_SEL 0x0800 -#define MX21ADS_IO_IRDA_MD0_B 0x1000 -#define MX21ADS_IO_IRDA_MD1 0x2000 -#define MX21ADS_IO_LED4_ON 0x4000 -#define MX21ADS_IO_LED3_ON 0x8000 +#define MX21ADS_IO_SD_WP (MX21ADS_MMGPIO_BASE + 0) +#define MX21ADS_IO_TP6 (MX21ADS_IO_SD_WP) +#define MX21ADS_IO_SW_SEL (MX21ADS_MMGPIO_BASE + 1) +#define MX21ADS_IO_TP7 (MX21ADS_IO_SW_SEL) +#define MX21ADS_IO_RESET_E_UART (MX21ADS_MMGPIO_BASE + 2) +#define MX21ADS_IO_RESET_BASE (MX21ADS_MMGPIO_BASE + 3) +#define MX21ADS_IO_CSI_CTL2 (MX21ADS_MMGPIO_BASE + 4) +#define MX21ADS_IO_CSI_CTL1 (MX21ADS_MMGPIO_BASE + 5) +#define MX21ADS_IO_CSI_CTL0 (MX21ADS_MMGPIO_BASE + 6) +#define MX21ADS_IO_UART1_EN (MX21ADS_MMGPIO_BASE + 7) +#define MX21ADS_IO_UART4_EN (MX21ADS_MMGPIO_BASE + 8) +#define MX21ADS_IO_LCDON (MX21ADS_MMGPIO_BASE + 9) +#define MX21ADS_IO_IRDA_EN (MX21ADS_MMGPIO_BASE + 10) +#define MX21ADS_IO_IRDA_FIR_SEL (MX21ADS_MMGPIO_BASE + 11) +#define MX21ADS_IO_IRDA_MD0_B (MX21ADS_MMGPIO_BASE + 12) +#define MX21ADS_IO_IRDA_MD1 (MX21ADS_MMGPIO_BASE + 13) +#define MX21ADS_IO_LED4_ON (MX21ADS_MMGPIO_BASE + 14) +#define MX21ADS_IO_LED3_ON (MX21ADS_MMGPIO_BASE + 15) static const int mx21ads_pins[] __initconst = { @@ -143,11 +138,8 @@ static struct physmap_flash_data mx21ads_flash_data = { .width = 4, }; -static struct resource mx21ads_flash_resource = { - .start = MX21_CS0_BASE_ADDR, - .end = MX21_CS0_BASE_ADDR + 0x02000000 - 1, - .flags = IORESOURCE_MEM, -}; +static struct resource mx21ads_flash_resource = + DEFINE_RES_MEM(MX21_CS0_BASE_ADDR, SZ_32M); static struct platform_device mx21ads_nor_mtd_device = { .name = "physmap-flash", @@ -160,7 +152,7 @@ static struct platform_device mx21ads_nor_mtd_device = { }; static struct resource mx21ads_cs8900_resources[] __initdata = { - DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), + DEFINE_RES_MEM(MX21ADS_CS8900A_REG, SZ_1K), /* irq number is run-time assigned */ DEFINE_RES_IRQ(-1), }; @@ -179,24 +171,50 @@ static const struct imxuart_platform_data uart_pdata_rts __initconst = { static const struct imxuart_platform_data uart_pdata_norts __initconst = { }; -static int mx21ads_fb_init(struct platform_device *pdev) -{ - u16 tmp; +static struct resource mx21ads_mmgpio_resource = + DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); - tmp = __raw_readw(MX21ADS_IO_REG); - tmp |= MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); - return 0; -} +static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .base = MX21ADS_MMGPIO_BASE, + .ngpio = 16, +}; -static void mx21ads_fb_exit(struct platform_device *pdev) -{ - u16 tmp; +static struct platform_device mx21ads_mmgpio = { + .name = "basic-mmio-gpio", + .id = PLATFORM_DEVID_AUTO, + .resource = &mx21ads_mmgpio_resource, + .num_resources = 1, + .dev = { + .platform_data = &mx21ads_mmgpio_pdata, + }, +}; - tmp = __raw_readw(MX21ADS_IO_REG); - tmp &= ~MX21ADS_IO_LCDON; - __raw_writew(tmp, MX21ADS_IO_REG); -} +static struct regulator_consumer_supply mx21ads_lcd_regulator_consumer = + REGULATOR_SUPPLY("lcd", "imx-fb.0"); + +static struct regulator_init_data mx21ads_lcd_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &mx21ads_lcd_regulator_consumer, + .num_consumer_supplies = 1, +}; + +static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { + .supply_name = "LCD", + .microvolts = 3300000, + .gpio = MX21ADS_IO_LCDON, + .enable_high = 1, + .init_data = &mx21ads_lcd_regulator_init_data, +}; + +static struct platform_device mx21ads_lcd_regulator = { + .name = "reg-fixed-voltage", + .id = PLATFORM_DEVID_AUTO, + .dev = { + .platform_data = &mx21ads_lcd_regulator_pdata, + }, +}; /* * Connected is a portrait Sharp-QVGA display @@ -229,26 +247,30 @@ static const struct imx_fb_platform_data mx21ads_fb_data __initconst = { .pwmr = 0x00a903ff, .lscr1 = 0x00120300, .dmacr = 0x00020008, - - .init = mx21ads_fb_init, - .exit = mx21ads_fb_exit, }; static int mx21ads_sdhc_get_ro(struct device *dev) { - return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0; + return gpio_get_value(MX21ADS_IO_SD_WP); } static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, - IRQF_TRIGGER_FALLING, "mmc-detect", data); + int ret; + + ret = gpio_request(MX21ADS_IO_SD_WP, "mmc-ro"); + if (ret) + return ret; + + return request_irq(gpio_to_irq(MX21ADS_MMC_CD), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); + free_irq(gpio_to_irq(MX21ADS_MMC_CD), data); + gpio_free(MX21ADS_IO_SD_WP); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -264,29 +286,9 @@ mx21ads_nand_board_info __initconst = { .hw_ecc = 1, }; -static struct map_desc mx21ads_io_desc[] __initdata = { - /* - * Memory-mapped I/O on MX21ADS Base board: - * - CS8900A Ethernet controller - * - ST16C2552CJ UART - * - CPU and Base board version - * - Base board I/O register - */ - { - .virtual = MX21ADS_MMIO_BASE_ADDR, - .pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR), - .length = MX21ADS_MMIO_SIZE, - .type = MT_DEVICE, - }, -}; - -static void __init mx21ads_map_io(void) -{ - mx21_map_io(); - iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc)); -} - static struct platform_device *platform_devices[] __initdata = { + &mx21ads_mmgpio, + &mx21ads_lcd_regulator, &mx21ads_nor_mtd_device, }; @@ -300,12 +302,13 @@ static void __init mx21ads_board_init(void) imx21_add_imx_uart0(&uart_pdata_rts); imx21_add_imx_uart2(&uart_pdata_norts); imx21_add_imx_uart3(&uart_pdata_rts); - imx21_add_imx_fb(&mx21ads_fb_data); imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx21_add_imx_fb(&mx21ads_fb_data); + mx21ads_cs8900_resources[1].start = gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); mx21ads_cs8900_resources[1].end = @@ -321,10 +324,9 @@ static void __init mx21ads_timer_init(void) MACHINE_START(MX21ADS, "Freescale i.MX21ADS") /* maintainer: Freescale Semiconductor, Inc. */ .atag_offset = 0x100, - .map_io = mx21ads_map_io, + .map_io = mx21_map_io, .init_early = imx21_init_early, .init_irq = mx21_init_irq, - .handle_irq = imx21_handle_irq, .init_time = mx21ads_timer_init, .init_machine = mx21ads_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 13490c203050..ea1fa199c148 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -263,7 +263,6 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)") .map_io = mx25_map_io, .init_early = imx25_init_early, .init_irq = mx25_init_irq, - .handle_irq = imx25_handle_irq, .init_time = mx25pdk_timer_init, .init_machine = mx25pdk_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 25b3e4c9bc0a..435a5428a678 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -544,7 +544,6 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27pdk_timer_init, .init_machine = mx27pdk_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a7a4a9c67615..2f834ce8f39c 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -391,7 +391,6 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS") .map_io = mx27ads_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mx27ads_timer_init, .init_machine = mx27ads_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 50044a21b388..4217871a9653 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -775,7 +775,6 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31_3ds_timer_init, .init_machine = mx31_3ds_init, .reserve = mx31_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index daf8889125cc..d08c37c696f6 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -582,7 +582,6 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS") .map_io = mx31ads_map_io, .init_early = imx31_init_early, .init_irq = mx31ads_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31ads_timer_init, .init_machine = mx31ads_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 832b1e2f964e..eee042fa2768 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -308,7 +308,6 @@ MACHINE_START(LILLY1131, "INCO startec LILLY-1131") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31lilly_timer_init, .init_machine = mx31lilly_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index bea07299b61a..fa15d0b6118d 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -291,7 +291,6 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM") .map_io = mx31lite_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31lite_timer_init, .init_machine = mx31lite_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 8f45afe785f8..08730f238449 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -600,7 +600,6 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = mx31moboard_timer_init, .init_machine = mx31moboard_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index a42f4f07051f..4e8b184d773b 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -615,7 +615,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = mx35pdk_timer_init, .init_machine = mx35_3ds_init, .reserve = mx35_3ds_reserve, diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c deleted file mode 100644 index f3d264a636fa..000000000000 --- a/arch/arm/mach-imx/mach-mx51_babbage.c +++ /dev/null @@ -1,428 +0,0 @@ -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com> - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/input.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> - -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx51.h" -#include "hardware.h" -#include "iomux-mx51.h" - -#define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) -#define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) -#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5) -#define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14) -#define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) -#define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) -#define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) -#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) -#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static struct gpio_keys_button babbage_buttons[] = { - { - .gpio = BABBAGE_POWER_KEY, - .code = BTN_0, - .desc = "PWR", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data imx_button_data __initconst = { - .buttons = babbage_buttons, - .nbuttons = ARRAY_SIZE(babbage_buttons), -}; - -static iomux_v3_cfg_t mx51babbage_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - - /* UART3 */ - MX51_PAD_EIM_D25__UART3_RXD, - MX51_PAD_EIM_D26__UART3_TXD, - MX51_PAD_EIM_D27__UART3_RTS, - MX51_PAD_EIM_D24__UART3_CTS, - - /* I2C1 */ - MX51_PAD_EIM_D16__I2C1_SDA, - MX51_PAD_EIM_D19__I2C1_SCL, - - /* I2C2 */ - MX51_PAD_KEY_COL4__I2C2_SCL, - MX51_PAD_KEY_COL5__I2C2_SDA, - - /* HSI2C */ - MX51_PAD_I2C1_CLK__I2C1_CLK, - MX51_PAD_I2C1_DAT__I2C1_DAT, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - - /* USB HUB reset line*/ - MX51_PAD_GPIO1_7__GPIO1_7, - - /* USB PHY reset line */ - MX51_PAD_EIM_D21__GPIO2_5, - - /* FEC */ - MX51_PAD_EIM_EB2__FEC_MDIO, - MX51_PAD_EIM_EB3__FEC_RDATA1, - MX51_PAD_EIM_CS2__FEC_RDATA2, - MX51_PAD_EIM_CS3__FEC_RDATA3, - MX51_PAD_EIM_CS4__FEC_RX_ER, - MX51_PAD_EIM_CS5__FEC_CRS, - MX51_PAD_NANDF_RB2__FEC_COL, - MX51_PAD_NANDF_RB3__FEC_RX_CLK, - MX51_PAD_NANDF_D9__FEC_RDATA0, - MX51_PAD_NANDF_D8__FEC_TDATA0, - MX51_PAD_NANDF_CS2__FEC_TX_ER, - MX51_PAD_NANDF_CS3__FEC_MDC, - MX51_PAD_NANDF_CS4__FEC_TDATA1, - MX51_PAD_NANDF_CS5__FEC_TDATA2, - MX51_PAD_NANDF_CS6__FEC_TDATA3, - MX51_PAD_NANDF_CS7__FEC_TX_EN, - MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK, - - /* FEC PHY reset line */ - MX51_PAD_EIM_A20__GPIO2_14, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - /* CD/WP from controller */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - /* CD/WP gpio */ - MX51_PAD_GPIO1_6__GPIO1_6, - MX51_PAD_GPIO1_5__GPIO1_5, - - /* eCSPI1 */ - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - - /* Audio */ - MX51_PAD_AUD3_BB_TXD__AUD3_TXD, - MX51_PAD_AUD3_BB_RXD__AUD3_RXD, - MX51_PAD_AUD3_BB_CK__AUD3_TXC, - MX51_PAD_AUD3_BB_FS__AUD3_TXFS, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data babbage_i2c_data __initconst = { - .bitrate = 100000, -}; - -static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = { - .bitrate = 400000, -}; - -static struct gpio mx51_babbage_usbh1_gpios[] = { - { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" }, - { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" }, -}; - -static int gpio_usbh1_active(void) -{ - iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27; - int ret; - - /* Set USBH1_STP to GPIO and toggle it */ - mxc_iomux_v3_setup_pad(usbh1stp_gpio); - ret = gpio_request_array(mx51_babbage_usbh1_gpios, - ARRAY_SIZE(mx51_babbage_usbh1_gpios)); - - if (ret) { - pr_debug("failed to get USBH1 pins: %d\n", ret); - return ret; - } - - msleep(100); - gpio_set_value(BABBAGE_USBH1_STP, 1); - gpio_set_value(BABBAGE_USB_PHY_RESET, 1); - gpio_free_array(mx51_babbage_usbh1_gpios, - ARRAY_SIZE(mx51_babbage_usbh1_gpios)); - return 0; -} - -static inline void babbage_usbhub_reset(void) -{ - int ret; - - /* Reset USB hub */ - ret = gpio_request_one(BABBAGE_USB_HUB_RESET, - GPIOF_OUT_INIT_LOW, "GPIO1_7"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret); - return; - } - - msleep(2); - /* Deassert reset */ - gpio_set_value(BABBAGE_USB_HUB_RESET, 1); -} - -static inline void babbage_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request_one(BABBAGE_FEC_PHY_RESET, - GPIOF_OUT_INIT_LOW, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - msleep(1); - gpio_set_value(BABBAGE_FEC_PHY_RESET, 1); -} - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come externally from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static bool otg_mode_host __initdata; - -static int __init babbage_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", babbage_otg_mode); - -static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = { - { - .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL, - }, -}; - -static int mx51_babbage_spi_cs[] = { - BABBAGE_ECSPI1_CS0, - BABBAGE_ECSPI1_CS1, -}; - -static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { - .chipselect = mx51_babbage_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), -}; - -static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { - .cd_gpio = BABBAGE_SD2_CD, - .wp_gpio = BABBAGE_SD2_WP, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_GPIO, -}; - -void __init imx51_babbage_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads, - ARRAY_SIZE(mx51babbage_pads)); -} - -/* - * Board specific initialization. - */ -static void __init mx51_babbage_init(void) -{ - iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); - - imx51_soc_init(); - - imx51_babbage_common_init(); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - babbage_fec_reset(); - imx51_add_fec(NULL); - - /* Set the PAD settings for the pwr key. */ - mxc_iomux_v3_setup_pad(power_key); - imx_add_gpio_keys(&imx_button_data); - - imx51_add_imx_i2c(0, &babbage_i2c_data); - imx51_add_imx_i2c(1, &babbage_i2c_data); - imx51_add_hsi2c(&babbage_hsi2c_data); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - - gpio_usbh1_active(); - imx51_add_mxc_ehci_hs(1, &usbh1_config); - /* setback USBH1_STP to be function */ - mxc_iomux_v3_setup_pad(usbh1stp); - babbage_usbhub_reset(); - - imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data); - imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data); - - spi_register_board_info(mx51_babbage_spi_board_info, - ARRAY_SIZE(mx51_babbage_spi_board_info)); - imx51_add_ecspi(0, &mx51_babbage_spi_pdata); - imx51_add_imx2_wdt(0); -} - -static void __init mx51_babbage_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board") - /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_time = mx51_babbage_timer_init, - .init_machine = mx51_babbage_init, - .init_late = imx51_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index c91894003da9..0b5d1ca31b9f 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -267,7 +267,6 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = mxt_td60_timer_init, .init_machine = mxt_td60_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bf3ac51d5aca..12212378c672 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -245,8 +245,7 @@ static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, int ret; ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, - IRQF_DISABLED | IRQF_TRIGGER_FALLING, - "imx-mmc-detect", data); + IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) printk(KERN_ERR "pca100: Failed to request irq for sd/mmc detection\n"); @@ -421,7 +420,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_machine = pca100_init, .init_time = pca100_timer_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 639a3dfb0092..81b8affb9448 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -703,7 +703,6 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = pcm037_timer_init, .init_machine = pcm037_init, .init_late = pcm037_init_late, diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 592ddbe031ac..6c56fb5553c7 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -351,7 +351,6 @@ MACHINE_START(PCM038, "phyCORE-i.MX27") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, - .handle_irq = imx27_handle_irq, .init_time = pcm038_timer_init, .init_machine = pcm038_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index ac504b67326b..c62b5d261345 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -400,7 +400,6 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = pcm043_timer_init, .init_machine = pcm043_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index 22af27ed457e..a213e7b9cb1c 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -266,7 +266,6 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, - .handle_irq = imx31_handle_irq, .init_time = qong_timer_init, .init_machine = qong_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index b0fa10dd79fe..1f6bc3f7ae14 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -137,7 +137,6 @@ MACHINE_START(SCB9328, "Synertronixx scb9328") .map_io = mx1_map_io, .init_early = imx1_init_early, .init_irq = mx1_init_irq, - .handle_irq = imx1_handle_irq, .init_time = scb9328_timer_init, .init_machine = scb9328_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index 8825d1217d18..872b3c6ba408 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -310,7 +310,6 @@ MACHINE_START(VPR200, "VPR200") .map_io = mx35_map_io, .init_early = imx35_init_early, .init_irq = mx35_init_irq, - .handle_irq = imx35_handle_irq, .init_time = vpr200_timer_init, .init_machine = vpr200_board_init, .restart = mxc_restart, diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index b08ab3ad4a6d..75d6a37e1ae4 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -36,6 +36,7 @@ #define MXC_CPU_MX53 53 #define MXC_CPU_IMX6SL 0x60 #define MXC_CPU_IMX6DL 0x61 +#define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 #define IMX_CHIP_REVISION_1_0 0x10 @@ -163,6 +164,11 @@ static inline bool cpu_is_imx6dl(void) return __mxc_cpu_type == MXC_CPU_IMX6DL; } +static inline bool cpu_is_imx6sx(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX6SX; +} + static inline bool cpu_is_imx6q(void) { return __mxc_cpu_type == MXC_CPU_IMX6Q; diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c index 65222ea0df6d..bed081e58262 100644 --- a/arch/arm/mach-imx/time.c +++ b/arch/arm/mach-imx/time.c @@ -28,6 +28,9 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/sched_clock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <asm/mach/time.h> @@ -328,3 +331,15 @@ void __init mxc_timer_init(void __iomem *base, int irq) /* Make irqs happen */ setup_irq(irq, &mxc_timer_irq); } + +void __init mxc_timer_init_dt(struct device_node *np) +{ + void __iomem *base; + int irq; + + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + + mxc_timer_init(base, irq); +} diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index 8183178d5aa3..7828af4b2022 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -125,7 +125,7 @@ static __init void tzic_init_gc(int idx, unsigned int irq_start) irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -asmlinkage void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) +static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) { u32 stat; int i, irqofs, handled; @@ -189,6 +189,8 @@ void __init tzic_init_irq(void __iomem *irqbase) for (i = 0; i < 4; i++, irq_base += 32) tzic_init_gc(i, irq_base); + set_handle_irq(tzic_handle_irq); + #ifdef CONFIG_FIQ /* Initialize FIQ */ init_FIQ(FIQ_START); diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index 2801da49e2a3..ff18ff20f71f 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -195,7 +195,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 2a97a2e4163c..2c47a8ad0e27 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -7,6 +7,7 @@ * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ +#include <asm/exception.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/irq.h> @@ -30,11 +31,47 @@ static int __initdata gpio1_irqs[4] = { 0, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +static void __iomem *kirkwood_irq_base = IRQ_VIRT_BASE; + +asmlinkage void +__exception_irq_entry kirkwood_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_LOW_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_LOW_OFF); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } + stat = readl_relaxed(kirkwood_irq_base + IRQ_CAUSE_HIGH_OFF); + stat &= readl_relaxed(kirkwood_irq_base + IRQ_MASK_HIGH_OFF); + if (stat) { + unsigned int hwirq = 32 + __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init kirkwood_init_irq(void) { orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(kirkwood_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-49. */ diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index a7f959e58c3d..9b26976fb084 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -42,9 +42,6 @@ config ARCH_QSD8X50 endchoice -config MSM_HAS_DEBUG_UART_HS - bool - config MSM_SOC_REV_A bool diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 2052a90d9981..6090b9eb00c8 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -5,6 +5,7 @@ config ARCH_MVEBU select GENERIC_IRQ_CHIP select PINCTRL select PLAT_ORION + select SOC_BUS select MVEBU_MBUS select ZONE_DMA if ARM_LPAE select ARCH_REQUIRE_GPIOLIB @@ -35,6 +36,9 @@ config MACH_ARMADA_375 select ARM_ERRATA_753970 select ARM_GIC select ARMADA_375_CLK + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 help @@ -47,6 +51,9 @@ config MACH_ARMADA_38X select ARM_ERRATA_753970 select ARM_GIC select ARMADA_38X_CLK + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X help @@ -90,13 +97,6 @@ config MACH_KIRKWOOD Say 'Y' here if you want your kernel to support boards based on the Marvell Kirkwood device tree. -config MACH_T5325 - bool "HP T5325 thin client" - depends on MACH_KIRKWOOD - help - Say 'Y' here if you want your kernel to support the - HP T5325 Thin client - endmenu endif diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index a63e43b6b451..2ecb828e4a8b 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -2,12 +2,15 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ -I$(srctree)/arch/arm/plat-orion/include AFLAGS_coherency_ll.o := -Wa,-march=armv7-a +CFLAGS_pmsu.o := -march=armv7-a obj-y += system-controller.o mvebu-soc-id.o -obj-$(CONFIG_MACH_MVEBU_V7) += board-v7.o + +ifeq ($(CONFIG_MACH_MVEBU_V7),y) +obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o +obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o +obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o +endif + obj-$(CONFIG_MACH_DOVE) += dove.o -obj-$(CONFIG_ARCH_MVEBU) += coherency.o coherency_ll.o pmsu.o -obj-$(CONFIG_SMP) += platsmp.o headsmp.o -obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_MACH_KIRKWOOD) += kirkwood.o kirkwood-pm.o -obj-$(CONFIG_MACH_T5325) += board-t5325.o diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h index 237c86b83390..c3465f5b1250 100644 --- a/arch/arm/mach-mvebu/armada-370-xp.h +++ b/arch/arm/mach-mvebu/armada-370-xp.h @@ -20,8 +20,6 @@ #define ARMADA_XP_MAX_CPUS 4 -void armada_mpic_send_doorbell(const struct cpumask *mask, unsigned int irq); -void armada_xp_mpic_smp_cpu_init(void); void armada_xp_secondary_startup(void); extern struct smp_operations armada_xp_smp_ops; #endif diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c deleted file mode 100644 index 65ace6db9f28..000000000000 --- a/arch/arm/mach-mvebu/board-t5325.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * HP T5325 Board Setup - * - * Copyright (C) 2014 - * - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <sound/alc5623.h> -#include "board.h" - -static struct platform_device hp_t5325_audio_device = { - .name = "t5325-audio", - .id = -1, -}; - -static struct alc5623_platform_data alc5621_data = { - .add_ctrl = 0x3700, - .jack_det_ctrl = 0x4810, -}; - -static struct i2c_board_info i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("alc5621", 0x1a), - .platform_data = &alc5621_data, - }, -}; - -void __init t5325_init(void) -{ - i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); - platform_device_register(&hp_t5325_audio_device); -} diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 333fca8fdc41..01cfce6ac20b 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -27,12 +27,30 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> +#include <asm/smp_scu.h> #include "armada-370-xp.h" #include "common.h" #include "coherency.h" #include "mvebu-soc-id.h" /* + * Enables the SCU when available. Obviously, this is only useful on + * Cortex-A based SOCs, not on PJ4B based ones. + */ +static void __init mvebu_scu_enable(void) +{ + void __iomem *scu_base; + + struct device_node *np = + of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +/* * Early versions of Armada 375 SoC have a bug where the BootROM * leaves an external data abort pending. The kernel is hit by this * data abort as soon as it enters userspace, because it unmasks the @@ -57,11 +75,10 @@ static void __init mvebu_timer_and_clk_init(void) { of_clk_init(NULL); clocksource_of_init(); + mvebu_scu_enable(); coherency_init(); - BUG_ON(mvebu_mbus_dt_init()); -#ifdef CONFIG_CACHE_L2X0 + BUG_ON(mvebu_mbus_dt_init(coherency_available())); l2x0_of_init(0, ~0UL); -#endif if (of_machine_is_compatible("marvell,armada375")) hook_fault_code(16 + 6, armada_375_external_abort_wa, SIGBUS, 0, @@ -78,7 +95,7 @@ static void __init i2c_quirk(void) * mechanism. We can exit only if we are sure that we can * get the SoC revision and it is more recent than A0. */ - if (mvebu_get_soc_id(&rev, &dev) == 0 && dev > MV78XX0_A0_REV) + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV) return; for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") { @@ -96,10 +113,66 @@ static void __init i2c_quirk(void) return; } +#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc + +static void __init thermal_quirk(void) +{ + struct device_node *np; + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > ARMADA_375_Z1_REV) + return; + + for_each_compatible_node(np, NULL, "marvell,armada375-thermal") { + struct property *prop; + __be32 newval, *newprop, *oldprop; + int len; + + /* + * The register offset is at a wrong location. This quirk + * creates a new reg property as a clone of the previous + * one and corrects the offset. + */ + oldprop = (__be32 *)of_get_property(np, "reg", &len); + if (!oldprop) + continue; + + /* Create a duplicate of the 'reg' property */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->length = len; + prop->name = kstrdup("reg", GFP_KERNEL); + prop->value = kzalloc(len, GFP_KERNEL); + memcpy(prop->value, oldprop, len); + + /* Fixup the register offset of the second entry */ + oldprop += 2; + newprop = (__be32 *)prop->value + 2; + newval = cpu_to_be32(be32_to_cpu(*oldprop) - + A375_Z1_THERMAL_FIXUP_OFFSET); + *newprop = newval; + of_update_property(np, prop); + + /* + * The thermal controller needs some quirk too, so let's change + * the compatible string to reflect this. + */ + prop = kzalloc(sizeof(*prop), GFP_KERNEL); + prop->name = kstrdup("compatible", GFP_KERNEL); + prop->length = sizeof("marvell,armada375-z1-thermal"); + prop->value = kstrdup("marvell,armada375-z1-thermal", + GFP_KERNEL); + of_update_property(np, prop); + } + return; +} + static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("plathome,openblocks-ax3-4")) i2c_quirk(); + if (of_machine_is_compatible("marvell,a375-db")) + thermal_quirk(); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -123,6 +196,7 @@ static const char * const armada_375_dt_compat[] = { DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)") .init_time = mvebu_timer_and_clk_init, + .init_machine = mvebu_dt_init, .restart = mvebu_restart, .dt_compat = armada_375_dt_compat, MACHINE_END diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h index de7f0a191394..9c7bb4386f8b 100644 --- a/arch/arm/mach-mvebu/board.h +++ b/arch/arm/mach-mvebu/board.h @@ -13,10 +13,4 @@ #ifndef __ARCH_MVEBU_BOARD_H #define __ARCH_MVEBU_BOARD_H -#ifdef CONFIG_MACH_T5325 -void t5325_init(void); -#else -static inline void t5325_init(void) {}; -#endif - #endif diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index 4e9d58148ca7..477202fd39cc 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -17,6 +17,8 @@ * supplies basic routines for configuring and controlling hardware coherency */ +#define pr_fmt(fmt) "mvebu-coherency: " fmt + #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> @@ -24,13 +26,19 @@ #include <linux/smp.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/mbus.h> +#include <linux/clk.h> +#include <linux/pci.h> #include <asm/smp_plat.h> #include <asm/cacheflush.h> +#include <asm/mach/map.h> #include "armada-370-xp.h" #include "coherency.h" +#include "mvebu-soc-id.h" unsigned long coherency_phys_base; -static void __iomem *coherency_base; +void __iomem *coherency_base; static void __iomem *coherency_cpu_base; /* Coherency fabric registers */ @@ -38,27 +46,190 @@ static void __iomem *coherency_cpu_base; #define IO_SYNC_BARRIER_CTL_OFFSET 0x0 +enum { + COHERENCY_FABRIC_TYPE_NONE, + COHERENCY_FABRIC_TYPE_ARMADA_370_XP, + COHERENCY_FABRIC_TYPE_ARMADA_375, + COHERENCY_FABRIC_TYPE_ARMADA_380, +}; + static struct of_device_id of_coherency_table[] = { - {.compatible = "marvell,coherency-fabric"}, + {.compatible = "marvell,coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP }, + {.compatible = "marvell,armada-375-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 }, + {.compatible = "marvell,armada-380-coherency-fabric", + .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 }, { /* end of list */ }, }; -/* Function defined in coherency_ll.S */ -int ll_set_cpu_coherent(void __iomem *base_addr, unsigned int hw_cpu_id); +/* Functions defined in coherency_ll.S */ +int ll_enable_coherency(void); +void ll_add_cpu_to_smp_group(void); -int set_cpu_coherent(unsigned int hw_cpu_id, int smp_group_id) +int set_cpu_coherent(void) { if (!coherency_base) { - pr_warn("Can't make CPU %d cache coherent.\n", hw_cpu_id); + pr_warn("Can't make current CPU cache coherent.\n"); pr_warn("Coherency fabric is not initialized\n"); return 1; } - return ll_set_cpu_coherent(coherency_base, hw_cpu_id); + ll_add_cpu_to_smp_group(); + return ll_enable_coherency(); +} + +/* + * The below code implements the I/O coherency workaround on Armada + * 375. This workaround consists in using the two channels of the + * first XOR engine to trigger a XOR transaction that serves as the + * I/O coherency barrier. + */ + +static void __iomem *xor_base, *xor_high_base; +static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS]; +static void *coherency_wa_buf[CONFIG_NR_CPUS]; +static bool coherency_wa_enabled; + +#define XOR_CONFIG(chan) (0x10 + (chan * 4)) +#define XOR_ACTIVATION(chan) (0x20 + (chan * 4)) +#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2)) +#define WINDOW_BASE(w) (0x250 + ((w) << 2)) +#define WINDOW_SIZE(w) (0x270 + ((w) << 2)) +#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2)) +#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2)) +#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4)) +#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4)) +#define XOR_INIT_VALUE_LOW 0x2E0 +#define XOR_INIT_VALUE_HIGH 0x2E4 + +static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void) +{ + int idx = smp_processor_id(); + + /* Write '1' to the first word of the buffer */ + writel(0x1, coherency_wa_buf[idx]); + + /* Wait until the engine is idle */ + while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3) + ; + + dmb(); + + /* Trigger channel */ + writel(0x1, xor_base + XOR_ACTIVATION(idx)); + + /* Poll the data until it is cleared by the XOR transaction */ + while (readl(coherency_wa_buf[idx])) + ; +} + +static void __init armada_375_coherency_init_wa(void) +{ + const struct mbus_dram_target_info *dram; + struct device_node *xor_node; + struct property *xor_status; + struct clk *xor_clk; + u32 win_enable = 0; + int i; + + pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n"); + + /* + * Since the workaround uses one XOR engine, we grab a + * reference to its Device Tree node first. + */ + xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor"); + BUG_ON(!xor_node); + + /* + * Then we mark it as disabled so that the real XOR driver + * will not use it. + */ + xor_status = kzalloc(sizeof(struct property), GFP_KERNEL); + BUG_ON(!xor_status); + + xor_status->value = kstrdup("disabled", GFP_KERNEL); + BUG_ON(!xor_status->value); + + xor_status->length = 8; + xor_status->name = kstrdup("status", GFP_KERNEL); + BUG_ON(!xor_status->name); + + of_update_property(xor_node, xor_status); + + /* + * And we remap the registers, get the clock, and do the + * initial configuration of the XOR engine. + */ + xor_base = of_iomap(xor_node, 0); + xor_high_base = of_iomap(xor_node, 1); + + xor_clk = of_clk_get_by_name(xor_node, NULL); + BUG_ON(!xor_clk); + + clk_prepare_enable(xor_clk); + + dram = mv_mbus_dram_info(); + + for (i = 0; i < 8; i++) { + writel(0, xor_base + WINDOW_BASE(i)); + writel(0, xor_base + WINDOW_SIZE(i)); + if (i < 4) + writel(0, xor_base + WINDOW_REMAP_HIGH(i)); + } + + for (i = 0; i < dram->num_cs; i++) { + const struct mbus_dram_window *cs = dram->cs + i; + writel((cs->base & 0xffff0000) | + (cs->mbus_attr << 8) | + dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i)); + writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i)); + + win_enable |= (1 << i); + win_enable |= 3 << (16 + (2 * i)); + } + + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0)); + writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0)); + writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1)); + + for (i = 0; i < CONFIG_NR_CPUS; i++) { + coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL); + BUG_ON(!coherency_wa_buf[i]); + + /* + * We can't use the DMA mapping API, since we don't + * have a valid 'struct device' pointer + */ + coherency_wa_buf_phys[i] = + virt_to_phys(coherency_wa_buf[i]); + BUG_ON(!coherency_wa_buf_phys[i]); + + /* + * Configure the XOR engine for memset operation, with + * a 128 bytes block size + */ + writel(0x444, xor_base + XOR_CONFIG(i)); + writel(128, xor_base + XOR_BLOCK_SIZE(i)); + writel(coherency_wa_buf_phys[i], + xor_base + XOR_DEST_POINTER(i)); + } + + writel(0x0, xor_base + XOR_INIT_VALUE_LOW); + writel(0x0, xor_base + XOR_INIT_VALUE_HIGH); + + coherency_wa_enabled = true; } static inline void mvebu_hwcc_sync_io_barrier(void) { + if (coherency_wa_enabled) { + mvebu_hwcc_armada375_sync_io_barrier_wa(); + return; + } + writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET); while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1); } @@ -105,8 +276,8 @@ static struct dma_map_ops mvebu_hwcc_dma_ops = { .set_dma_mask = arm_dma_set_mask, }; -static int mvebu_hwcc_platform_notifier(struct notifier_block *nb, - unsigned long event, void *__dev) +static int mvebu_hwcc_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) { struct device *dev = __dev; @@ -117,47 +288,148 @@ static int mvebu_hwcc_platform_notifier(struct notifier_block *nb, return NOTIFY_OK; } -static struct notifier_block mvebu_hwcc_platform_nb = { - .notifier_call = mvebu_hwcc_platform_notifier, +static struct notifier_block mvebu_hwcc_nb = { + .notifier_call = mvebu_hwcc_notifier, }; -int __init coherency_init(void) +static void __init armada_370_coherency_init(struct device_node *np) +{ + struct resource res; + + of_address_to_resource(np, 0, &res); + coherency_phys_base = res.start; + /* + * Ensure secondary CPUs will see the updated value, + * which they read before they join the coherency + * fabric, and therefore before they are coherent with + * the boot CPU cache. + */ + sync_cache_w(&coherency_phys_base); + coherency_base = of_iomap(np, 0); + coherency_cpu_base = of_iomap(np, 1); + set_cpu_coherent(); +} + +/* + * This ioremap hook is used on Armada 375/38x to ensure that PCIe + * memory areas are mapped as MT_UNCACHED instead of MT_DEVICE. This + * is needed as a workaround for a deadlock issue between the PCIe + * interface and the cache controller. + */ +static void __iomem * +armada_pcie_wa_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) +{ + struct resource pcie_mem; + + mvebu_mbus_get_pcie_mem_aperture(&pcie_mem); + + if (pcie_mem.start <= phys_addr && (phys_addr + size) <= pcie_mem.end) + mtype = MT_UNCACHED; + + return __arm_ioremap_caller(phys_addr, size, mtype, caller); +} + +static void __init armada_375_380_coherency_init(struct device_node *np) +{ + struct device_node *cache_dn; + + coherency_cpu_base = of_iomap(np, 0); + arch_ioremap_caller = armada_pcie_wa_ioremap_caller; + + /* + * Add the PL310 property "arm,io-coherent". This makes sure the + * outer sync operation is not used, which allows to + * workaround the system erratum that causes deadlocks when + * doing PCIe in an SMP situation on Armada 375 and Armada + * 38x. + */ + for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") { + struct property *p; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + p->name = kstrdup("arm,io-coherent", GFP_KERNEL); + of_add_property(cache_dn, p); + } +} + +static int coherency_type(void) { struct device_node *np; + const struct of_device_id *match; - np = of_find_matching_node(NULL, of_coherency_table); + np = of_find_matching_node_and_match(NULL, of_coherency_table, &match); if (np) { - struct resource res; - pr_info("Initializing Coherency fabric\n"); - of_address_to_resource(np, 0, &res); - coherency_phys_base = res.start; - /* - * Ensure secondary CPUs will see the updated value, - * which they read before they join the coherency - * fabric, and therefore before they are coherent with - * the boot CPU cache. - */ - sync_cache_w(&coherency_phys_base); - coherency_base = of_iomap(np, 0); - coherency_cpu_base = of_iomap(np, 1); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); - of_node_put(np); + int type = (int) match->data; + + /* Armada 370/XP coherency works in both UP and SMP */ + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + return type; + + /* Armada 375 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp()) + return type; + + /* Armada 380 coherency works only on SMP */ + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp()) + return type; } - return 0; + return COHERENCY_FABRIC_TYPE_NONE; } -static int __init coherency_late_init(void) +int coherency_available(void) +{ + return coherency_type() != COHERENCY_FABRIC_TYPE_NONE; +} + +int __init coherency_init(void) { + int type = coherency_type(); struct device_node *np; np = of_find_matching_node(NULL, of_coherency_table); - if (np) { - bus_register_notifier(&platform_bus_type, - &mvebu_hwcc_platform_nb); - of_node_put(np); + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) + armada_370_coherency_init(np); + else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 || + type == COHERENCY_FABRIC_TYPE_ARMADA_380) + armada_375_380_coherency_init(np); + + return 0; +} + +static int __init coherency_late_init(void) +{ + int type = coherency_type(); + + if (type == COHERENCY_FABRIC_TYPE_NONE) + return 0; + + if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_coherency_init_wa(); } + + bus_register_notifier(&platform_bus_type, + &mvebu_hwcc_nb); + return 0; } postcore_initcall(coherency_late_init); + +#if IS_ENABLED(CONFIG_PCI) +static int __init coherency_pci_init(void) +{ + if (coherency_available()) + bus_register_notifier(&pci_bus_type, + &mvebu_hwcc_nb); + return 0; +} + +arch_initcall(coherency_pci_init); +#endif diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 760226c41353..54cb7607b526 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -15,8 +15,9 @@ #define __MACH_370_XP_COHERENCY_H extern unsigned long coherency_phys_base; +int set_cpu_coherent(void); -int set_cpu_coherent(unsigned int cpu_id, int smp_group_id); int coherency_init(void); +int coherency_available(void); #endif /* __MACH_370_XP_COHERENCY_H */ diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S index ee7598fe75db..510c29e079ca 100644 --- a/arch/arm/mach-mvebu/coherency_ll.S +++ b/arch/arm/mach-mvebu/coherency_ll.S @@ -21,38 +21,129 @@ #define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4 #include <asm/assembler.h> +#include <asm/cp15.h> .text +/* Returns the coherency base address in r1 (r0 is untouched) */ +ENTRY(ll_get_coherency_base) + mrc p15, 0, r1, c1, c0, 0 + tst r1, #CR_M @ Check MMU bit enabled + bne 1f + + /* + * MMU is disabled, use the physical address of the coherency + * base address. + */ + adr r1, 3f + ldr r3, [r1] + ldr r1, [r1, r3] + b 2f +1: + /* + * MMU is enabled, use the virtual address of the coherency + * base address. + */ + ldr r1, =coherency_base + ldr r1, [r1] +2: + mov pc, lr +ENDPROC(ll_get_coherency_base) + /* - * r0: Coherency fabric base register address - * r1: HW CPU id + * Returns the coherency CPU mask in r3 (r0 is untouched). This + * coherency CPU mask can be used with the coherency fabric + * configuration and control registers. Note that the mask is already + * endian-swapped as appropriate so that the calling functions do not + * have to care about endianness issues while accessing the coherency + * fabric registers */ -ENTRY(ll_set_cpu_coherent) - /* Create bit by cpu index */ - mov r3, #(1 << 24) - lsl r1, r3, r1 -ARM_BE8(rev r1, r1) - - /* Add CPU to SMP group - Atomic */ - add r3, r0, #ARMADA_XP_CFB_CTL_REG_OFFSET -1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b - - /* Enable coherency on CPU - Atomic */ - add r3, r3, #ARMADA_XP_CFB_CFG_REG_OFFSET +ENTRY(ll_get_coherency_cpumask) + mrc 15, 0, r3, cr0, cr0, 5 + and r3, r3, #15 + mov r2, #(1 << 24) + lsl r3, r2, r3 +ARM_BE8(rev r3, r3) + mov pc, lr +ENDPROC(ll_get_coherency_cpumask) + +/* + * ll_add_cpu_to_smp_group(), ll_enable_coherency() and + * ll_disable_coherency() use the strex/ldrex instructions while the + * MMU can be disabled. The Armada XP SoC has an exclusive monitor + * that tracks transactions to Device and/or SO memory and thanks to + * that, exclusive transactions are functional even when the MMU is + * disabled. + */ + +ENTRY(ll_add_cpu_to_smp_group) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET 1: - ldrex r2, [r3] - orr r2, r2, r1 - strex r0, r2, [r3] - cmp r0, #0 - bne 1b + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + mov pc, lr +ENDPROC(ll_add_cpu_to_smp_group) +ENTRY(ll_enable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + orr r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b dsb - mov r0, #0 mov pc, lr -ENDPROC(ll_set_cpu_coherent) +ENDPROC(ll_enable_coherency) + +ENTRY(ll_disable_coherency) + /* + * As r0 is not modified by ll_get_coherency_base() and + * ll_get_coherency_cpumask(), we use it to temporarly save lr + * and avoid it being modified by the branch and link + * calls. This function is used very early in the secondary + * CPU boot, and no stack is available at this point. + */ + mov r0, lr + bl ll_get_coherency_base + bl ll_get_coherency_cpumask + mov lr, r0 + add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET +1: + ldrex r2, [r0] + bic r2, r2, r3 + strex r1, r2, [r0] + cmp r1, #0 + bne 1b + dsb + mov pc, lr +ENDPROC(ll_disable_coherency) + + .align 2 +3: + .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h index 55449c487c9e..b67fb7a10d8b 100644 --- a/arch/arm/mach-mvebu/common.h +++ b/arch/arm/mach-mvebu/common.h @@ -18,6 +18,9 @@ #include <linux/reboot.h> void mvebu_restart(enum reboot_mode mode, const char *cmd); +int mvebu_cpu_reset_deassert(int cpu); +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr); +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr); void armada_xp_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c new file mode 100644 index 000000000000..4a8f9eebebea --- /dev/null +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2014 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#define pr_fmt(fmt) "mvebu-cpureset: " fmt + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/io.h> +#include <linux/resource.h> +#include "armada-370-xp.h" + +static void __iomem *cpu_reset_base; +static size_t cpu_reset_size; + +#define CPU_RESET_OFFSET(cpu) (cpu * 0x8) +#define CPU_RESET_ASSERT BIT(0) + +int mvebu_cpu_reset_deassert(int cpu) +{ + u32 reg; + + if (!cpu_reset_base) + return -ENODEV; + + if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size) + return -EINVAL; + + reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu)); + reg &= ~CPU_RESET_ASSERT; + writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu)); + + return 0; +} + +static int mvebu_cpu_reset_map(struct device_node *np, int res_idx) +{ + struct resource res; + + if (of_address_to_resource(np, res_idx, &res)) { + pr_err("unable to get resource\n"); + return -ENOENT; + } + + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + return -EBUSY; + } + + cpu_reset_base = ioremap(res.start, resource_size(&res)); + if (!cpu_reset_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + return -ENOMEM; + } + + cpu_reset_size = resource_size(&res); + + return 0; +} + +int __init mvebu_cpu_reset_init(void) +{ + struct device_node *np; + int res_idx; + int ret; + + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-cpu-reset"); + if (np) { + res_idx = 0; + } else { + /* + * This code is kept for backward compatibility with + * old Device Trees. + */ + np = of_find_compatible_node(NULL, NULL, + "marvell,armada-370-xp-pmsu"); + if (np) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res_idx = 1; + } + } + + /* No reset node found */ + if (!np) + return -ENODEV; + + ret = mvebu_cpu_reset_map(np, res_idx); + of_node_put(np); + + return ret; +} + +early_initcall(mvebu_cpu_reset_init); diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index 5e5a43624237..b50464ec1130 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -23,7 +23,7 @@ static void __init dove_init(void) #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); #endif - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S new file mode 100644 index 000000000000..5925366bc03c --- /dev/null +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -0,0 +1,34 @@ +/* + * SMP support: Entry point for secondary CPUs of Marvell EBU + * Cortex-A9 based SOCs (Armada 375 and Armada 38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/linkage.h> +#include <linux/init.h> + + __CPUINIT +#define CPU_RESUME_ADDR_REG 0xf10182d4 + +.global armada_375_smp_cpu1_enable_code_start +.global armada_375_smp_cpu1_enable_code_end + +armada_375_smp_cpu1_enable_code_start: + ldr r0, [pc, #4] + ldr r1, [r0] + mov pc, r1 + .word CPU_RESUME_ADDR_REG +armada_375_smp_cpu1_enable_code_end: + +ENTRY(mvebu_cortex_a9_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S index 3dd80df428f7..2c4032e368ba 100644 --- a/arch/arm/mach-mvebu/headsmp.S +++ b/arch/arm/mach-mvebu/headsmp.S @@ -31,21 +31,10 @@ ENTRY(armada_xp_secondary_startup) ARM_BE8(setend be ) @ go BE8 if entered LE - /* Get coherency fabric base physical address */ - adr r0, 1f - ldr r1, [r0] - ldr r0, [r0, r1] + bl ll_add_cpu_to_smp_group - /* Read CPU id */ - mrc p15, 0, r1, c0, c0, 5 - and r1, r1, #0xF + bl ll_enable_coherency - /* Add CPU to coherency fabric */ - bl ll_set_cpu_coherent b secondary_startup ENDPROC(armada_xp_secondary_startup) - - .align 2 -1: - .long coherency_phys_base - . diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index 120207fc36f1..46f105913c84 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -169,7 +169,7 @@ static void __init kirkwood_dt_init(void) { kirkwood_disable_mbus_error_propagation(); - BUG_ON(mvebu_mbus_dt_init()); + BUG_ON(mvebu_mbus_dt_init(false)); #ifdef CONFIG_CACHE_FEROCEON_L2 feroceon_of_init(); @@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - if (of_machine_is_compatible("hp,t5325")) - t5325_init(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); } diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c index 09520e19b78e..d0f35b4d4a23 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.c +++ b/arch/arm/mach-mvebu/mvebu-soc-id.c @@ -23,6 +23,8 @@ #include <linux/kernel.h> #include <linux/of.h> #include <linux/of_address.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include "mvebu-soc-id.h" #define PCIE_DEV_ID_OFF 0x0 @@ -127,5 +129,33 @@ clk_err: return ret; } -core_initcall(mvebu_soc_id_init); +early_initcall(mvebu_soc_id_init); +static int __init mvebu_soc_device(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + + /* Also protects against running on non-mvebu systems */ + if (!is_id_valid) + return 0; + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return -ENOMEM; + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + } + + return 0; +} +postcore_initcall(mvebu_soc_device); diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h index 31654252fe35..c16bb68ca81f 100644 --- a/arch/arm/mach-mvebu/mvebu-soc-id.h +++ b/arch/arm/mach-mvebu/mvebu-soc-id.h @@ -20,6 +20,10 @@ #define MV78XX0_A0_REV 0x1 #define MV78XX0_B0_REV 0x2 +/* Armada 375 */ +#define ARMADA_375_Z1_REV 0x0 +#define ARMADA_375_A0_REV 0x3 + #ifdef CONFIG_ARCH_MVEBU int mvebu_get_soc_id(u32 *dev, u32 *rev); #else diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c new file mode 100644 index 000000000000..96c2c59e34b6 --- /dev/null +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -0,0 +1,102 @@ +/* + * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9 + * based SOCs (Armada 375/38x). + * + * Copyright (C) 2014 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/smp.h> +#include <linux/mbus.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include "common.h" +#include "mvebu-soc-id.h" +#include "pmsu.h" + +#define CRYPT0_ENG_ID 41 +#define CRYPT0_ENG_ATTR 0x1 +#define SRAM_PHYS_BASE 0xFFFF0000 + +#define BOOTROM_BASE 0xFFF00000 +#define BOOTROM_SIZE 0x100000 + +extern unsigned char armada_375_smp_cpu1_enable_code_end; +extern unsigned char armada_375_smp_cpu1_enable_code_start; + +void armada_375_smp_cpu1_enable_wa(void) +{ + void __iomem *sram_virt_base; + + mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE); + mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR, + SRAM_PHYS_BASE, SZ_64K); + sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K); + + memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start, + &armada_375_smp_cpu1_enable_code_end + - &armada_375_smp_cpu1_enable_code_start); +} + +extern void mvebu_cortex_a9_secondary_startup(void); + +static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + int ret, hw_cpu; + + pr_info("Booting CPU %d\n", cpu); + + /* + * Write the address of secondary startup into the system-wide + * flags register. The boot monitor waits until it receives a + * soft interrupt, and then the secondary CPU branches to this + * address. + */ + hw_cpu = cpu_logical_map(cpu); + + if (of_machine_is_compatible("marvell,armada375")) { + u32 dev, rev; + + if (mvebu_get_soc_id(&dev, &rev) == 0 && + rev == ARMADA_375_Z1_REV) + armada_375_smp_cpu1_enable_wa(); + + mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup); + } + else { + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, + mvebu_cortex_a9_secondary_startup); + } + + smp_wmb(); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_err("Could not start the secondary CPU: %d\n", ret); + return ret; + } + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = { + .smp_boot_secondary = mvebu_cortex_a9_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = armada_xp_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp", + &mvebu_cortex_a9_smp_ops); +CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp", + &mvebu_cortex_a9_smp_ops); diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c index a6da03f5b24e..88b976b31719 100644 --- a/arch/arm/mach-mvebu/platsmp.c +++ b/arch/arm/mach-mvebu/platsmp.c @@ -70,16 +70,19 @@ static void __init set_secondary_cpus_clock(void) } } -static void armada_xp_secondary_init(unsigned int cpu) -{ - armada_xp_mpic_smp_cpu_init(); -} - static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle) { + int ret, hw_cpu; + pr_info("Booting CPU %d\n", cpu); - armada_xp_boot_cpu(cpu, armada_xp_secondary_startup); + hw_cpu = cpu_logical_map(cpu); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup); + ret = mvebu_cpu_reset_deassert(hw_cpu); + if (ret) { + pr_warn("unable to boot CPU: %d\n", ret); + return ret; + } return 0; } @@ -90,8 +93,6 @@ static void __init armada_xp_smp_init_cpus(void) if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS) panic("Invalid number of CPUs in DT\n"); - - set_smp_cross_call(armada_mpic_send_doorbell); } static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) @@ -102,7 +103,7 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) set_secondary_cpus_clock(); flush_cache_all(); - set_cpu_coherent(cpu_logical_map(smp_processor_id()), 0); + set_cpu_coherent(); /* * In order to boot the secondary CPUs we need to ensure @@ -124,9 +125,11 @@ static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus) struct smp_operations armada_xp_smp_ops __initdata = { .smp_init_cpus = armada_xp_smp_init_cpus, .smp_prepare_cpus = armada_xp_smp_prepare_cpus, - .smp_secondary_init = armada_xp_secondary_init, .smp_boot_secondary = armada_xp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = armada_xp_cpu_die, #endif }; + +CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp", + &armada_xp_smp_ops); diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index d71ef53107c4..53a55c8520bf 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -16,62 +16,283 @@ * other SOC units */ +#define pr_fmt(fmt) "mvebu-pmsu: " fmt + +#include <linux/cpu_pm.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/of_address.h> #include <linux/io.h> +#include <linux/platform_device.h> #include <linux/smp.h> +#include <linux/resource.h> +#include <asm/cacheflush.h> +#include <asm/cp15.h> #include <asm/smp_plat.h> -#include "pmsu.h" +#include <asm/suspend.h> +#include <asm/tlbflush.h> +#include "common.h" static void __iomem *pmsu_mp_base; -static void __iomem *pmsu_reset_base; -#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x24) -#define PMSU_RESET_CTL_OFFSET(cpu) (cpu * 0x8) +#define PMSU_BASE_OFFSET 0x100 +#define PMSU_REG_SIZE 0x1000 + +/* PMSU MP registers */ +#define PMSU_CONTROL_AND_CONFIG(cpu) ((cpu * 0x100) + 0x104) +#define PMSU_CONTROL_AND_CONFIG_DFS_REQ BIT(18) +#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ BIT(16) +#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN BIT(20) + +#define PMSU_CPU_POWER_DOWN_CONTROL(cpu) ((cpu * 0x100) + 0x108) + +#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP BIT(0) + +#define PMSU_STATUS_AND_MASK(cpu) ((cpu * 0x100) + 0x10c) +#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT BIT(16) +#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT BIT(17) +#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP BIT(20) +#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP BIT(21) +#define PMSU_STATUS_AND_MASK_DBG_WAKEUP BIT(22) +#define PMSU_STATUS_AND_MASK_IRQ_MASK BIT(24) +#define PMSU_STATUS_AND_MASK_FIQ_MASK BIT(25) + +#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124) + +/* PMSU fabric registers */ +#define L2C_NFABRIC_PM_CTL 0x4 +#define L2C_NFABRIC_PM_CTL_PWR_DOWN BIT(20) + +extern void ll_disable_coherency(void); +extern void ll_enable_coherency(void); + +static struct platform_device armada_xp_cpuidle_device = { + .name = "cpuidle-armada-370-xp", +}; static struct of_device_id of_pmsu_table[] = { - {.compatible = "marvell,armada-370-xp-pmsu"}, + { .compatible = "marvell,armada-370-pmsu", }, + { .compatible = "marvell,armada-370-xp-pmsu", }, + { .compatible = "marvell,armada-380-pmsu", }, { /* end of list */ }, }; -#ifdef CONFIG_SMP -int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr) +void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr) { - int reg, hw_cpu; + writel(virt_to_phys(boot_addr), pmsu_mp_base + + PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); +} + +static int __init armada_370_xp_pmsu_init(void) +{ + struct device_node *np; + struct resource res; + int ret = 0; + + np = of_find_matching_node(NULL, of_pmsu_table); + if (!np) + return 0; + + pr_info("Initializing Power Management Service Unit\n"); - if (!pmsu_mp_base || !pmsu_reset_base) { - pr_warn("Can't boot CPU. PMSU is uninitialized\n"); - return 1; + if (of_address_to_resource(np, 0, &res)) { + pr_err("unable to get resource\n"); + ret = -ENOENT; + goto out; } - hw_cpu = cpu_logical_map(cpu_id); + if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) { + pr_warn(FW_WARN "deprecated pmsu binding\n"); + res.start = res.start - PMSU_BASE_OFFSET; + res.end = res.start + PMSU_REG_SIZE - 1; + } - writel(virt_to_phys(boot_addr), pmsu_mp_base + - PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu)); + if (!request_mem_region(res.start, resource_size(&res), + np->full_name)) { + pr_err("unable to request region\n"); + ret = -EBUSY; + goto out; + } + + pmsu_mp_base = ioremap(res.start, resource_size(&res)); + if (!pmsu_mp_base) { + pr_err("unable to map registers\n"); + release_mem_region(res.start, resource_size(&res)); + ret = -ENOMEM; + goto out; + } + + out: + of_node_put(np); + return ret; +} + +static void armada_370_xp_pmsu_enable_l2_powerdown_onidle(void) +{ + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */ + reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL); + reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN; + writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL); +} + +static void armada_370_xp_cpu_resume(void) +{ + asm volatile("bl ll_add_cpu_to_smp_group\n\t" + "bl ll_enable_coherency\n\t" + "b cpu_resume\n\t"); +} + +/* No locking is needed because we only access per-CPU registers */ +void armada_370_xp_pmsu_idle_prepare(bool deepidle) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; - /* Release CPU from reset by clearing reset bit*/ - reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); - reg &= (~0x1); - writel(reg, pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu)); + /* + * Adjust the PMSU configuration to wait for WFI signal, enable + * IRQ and FIQ as wakeup events, set wait for snoop queue empty + * indication and mask IRQ and FIQ from CPU + */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT | + PMSU_STATUS_AND_MASK_IRQ_WAKEUP | + PMSU_STATUS_AND_MASK_FIQ_WAKEUP | + PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT | + PMSU_STATUS_AND_MASK_IRQ_MASK | + PMSU_STATUS_AND_MASK_FIQ_MASK; + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + /* ask HW to power down the L2 Cache if needed */ + if (deepidle) + reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + + /* request power down */ + reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* Disable snoop disable by HW - SW is taking care of it */ + reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); + reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP; + writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu)); +} + +static noinline int do_armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + armada_370_xp_pmsu_idle_prepare(deepidle); + + v7_exit_coherency_flush(all); + + ll_disable_coherency(); + + dsb(); + + wfi(); + + /* If we are here, wfi failed. As processors run out of + * coherency for some time, tlbs might be stale, so flush them + */ + local_flush_tlb_all(); + + ll_enable_coherency(); + + /* Test the CR_C bit and set it if it was cleared */ + asm volatile( + "mrc p15, 0, %0, c1, c0, 0 \n\t" + "tst %0, #(1 << 2) \n\t" + "orreq %0, %0, #(1 << 2) \n\t" + "mcreq p15, 0, %0, c1, c0, 0 \n\t" + "isb " + : : "r" (0)); + + pr_warn("Failed to suspend the system\n"); return 0; } -#endif -static int __init armada_370_xp_pmsu_init(void) +static int armada_370_xp_cpu_suspend(unsigned long deepidle) +{ + return cpu_suspend(deepidle, do_armada_370_xp_cpu_suspend); +} + +/* No locking is needed because we only access per-CPU registers */ +static noinline void armada_370_xp_pmsu_idle_restore(void) +{ + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + u32 reg; + + if (pmsu_mp_base == NULL) + return; + + /* cancel ask HW to power down the L2 Cache if possible */ + reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN; + writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu)); + + /* cancel Enable wakeup events and mask interrupts */ + reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP); + reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT; + reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT; + reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK); + writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu)); +} + +static int armada_370_xp_cpu_pm_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if (action == CPU_PM_ENTER) { + unsigned int hw_cpu = cpu_logical_map(smp_processor_id()); + mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_370_xp_cpu_resume); + } else if (action == CPU_PM_EXIT) { + armada_370_xp_pmsu_idle_restore(); + } + + return NOTIFY_OK; +} + +static struct notifier_block armada_370_xp_cpu_pm_notifier = { + .notifier_call = armada_370_xp_cpu_pm_notify, +}; + +int __init armada_370_xp_cpu_pm_init(void) { struct device_node *np; + /* + * Check that all the requirements are available to enable + * cpuidle. So far, it is only supported on Armada XP, cpuidle + * needs the coherency fabric and the PMSU enabled + */ + + if (!of_machine_is_compatible("marvell,armadaxp")) + return 0; + + np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric"); + if (!np) + return 0; + of_node_put(np); + np = of_find_matching_node(NULL, of_pmsu_table); - if (np) { - pr_info("Initializing Power Management Service Unit\n"); - pmsu_mp_base = of_iomap(np, 0); - pmsu_reset_base = of_iomap(np, 1); - of_node_put(np); - } + if (!np) + return 0; + of_node_put(np); + + armada_370_xp_pmsu_enable_l2_powerdown_onidle(); + armada_xp_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend; + platform_device_register(&armada_xp_cpuidle_device); + cpu_pm_register_notifier(&armada_370_xp_cpu_pm_notifier); return 0; } +arch_initcall(armada_370_xp_cpu_pm_init); early_initcall(armada_370_xp_pmsu_init); diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index 614ba6832ff3..0c5524ac75b7 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -37,6 +37,8 @@ struct mvebu_system_controller { u32 rstoutn_mask_reset_out_en; u32 system_soft_reset; + + u32 resume_boot_addr; }; static struct mvebu_system_controller *mvebu_sc; @@ -52,6 +54,7 @@ static const struct mvebu_system_controller armada_375_system_controller = { .system_soft_reset_offset = 0x58, .rstoutn_mask_reset_out_en = 0x1, .system_soft_reset = 0x1, + .resume_boot_addr = 0xd4, }; static const struct mvebu_system_controller orion_system_controller = { @@ -98,6 +101,16 @@ void mvebu_restart(enum reboot_mode mode, const char *cmd) ; } +#ifdef CONFIG_SMP +void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr) +{ + BUG_ON(system_controller_base == NULL); + BUG_ON(mvebu_sc->resume_boot_addr == 0); + writel(virt_to_phys(boot_addr), system_controller_base + + mvebu_sc->resume_boot_addr); +} +#endif + static int __init mvebu_system_controller_init(void) { const struct of_device_id *match; @@ -114,4 +127,4 @@ static int __init mvebu_system_controller_init(void) return 0; } -arch_initcall(mvebu_system_controller_init); +early_initcall(mvebu_system_controller_init); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f61f1bf68df4..43969da5d50b 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -628,6 +628,41 @@ void __init omap5xxx_check_revision(void) pr_info("%s %s\n", soc_name, soc_rev); } +void __init dra7xxx_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + switch (hawkeye) { + case 0xb990: + switch (rev) { + case 0: + omap_revision = DRA752_REV_ES1_0; + break; + case 1: + default: + omap_revision = DRA752_REV_ES1_1; + } + break; + + default: + /* Unknown default to latest silicon rev as default*/ + pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%d)\n", + __func__, idcode, hawkeye, rev); + omap_revision = DRA752_REV_ES1_1; + } + + sprintf(soc_name, "DRA%03x", omap_rev() >> 16); + sprintf(soc_rev, "ES%d.%d", (omap_rev() >> 12) & 0xf, + (omap_rev() >> 8) & 0xf); + + pr_info("%s %s\n", soc_name, soc_rev); +} + /* * Set up things for map_io and processor detection later on. Gets called * pretty much first thing from board init. For multi-omap, this gets @@ -669,6 +704,8 @@ static const char * __init omap_get_family(void) return kasprintf(GFP_KERNEL, "OMAP5"); else if (soc_is_am43xx()) return kasprintf(GFP_KERNEL, "AM43xx"); + else if (soc_is_dra7xx()) + return kasprintf(GFP_KERNEL, "DRA7"); else return kasprintf(GFP_KERNEL, "Unknown"); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index f14f9ac2dca1..4ec3b4a93843 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -693,6 +693,7 @@ void __init dra7xx_init_early(void) omap_prm_base_init(); omap_cm_base_init(); omap44xx_prm_init(); + dra7xxx_check_revision(); dra7xx_powerdomains_init(); dra7xx_clockdomains_init(); dra7xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 1219280bb976..41e54f759934 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -3635,15 +3635,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_dmic_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> dmic (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_dmic_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* dsp -> iva */ @@ -4209,15 +4201,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp1_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp1 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp1_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> mcbsp2 */ @@ -4225,15 +4209,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp2_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp2 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp2_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> mcbsp3 */ @@ -4241,15 +4217,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcbsp3_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcbsp3 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcbsp3_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> mcbsp4 */ @@ -4265,15 +4233,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_mcpdm_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> mcpdm (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_mcpdm_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> mcspi1 */ @@ -4575,15 +4535,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer5_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer5 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer5_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer6 */ @@ -4591,15 +4543,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer6_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer6 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer6_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer7 */ @@ -4607,15 +4551,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer7_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer7 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer7_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_abe -> timer8 */ @@ -4623,15 +4559,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_timer8_hwmod, .clk = "ocp_abe_iclk", - .user = OCP_USER_MPU, -}; - -/* l4_abe -> timer8 (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { - .master = &omap44xx_l4_abe_hwmod, - .slave = &omap44xx_timer8_hwmod, - .clk = "ocp_abe_iclk", - .user = OCP_USER_SDMA, + .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4_per -> timer9 */ @@ -4831,7 +4759,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l3_instr__debugss, &omap44xx_l4_cfg__dma_system, &omap44xx_l4_abe__dmic, - &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, @@ -4874,14 +4801,10 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__mcasp, &omap44xx_l4_abe__mcasp_dma, &omap44xx_l4_abe__mcbsp1, - &omap44xx_l4_abe__mcbsp1_dma, &omap44xx_l4_abe__mcbsp2, - &omap44xx_l4_abe__mcbsp2_dma, &omap44xx_l4_abe__mcbsp3, - &omap44xx_l4_abe__mcbsp3_dma, &omap44xx_l4_per__mcbsp4, &omap44xx_l4_abe__mcpdm, - &omap44xx_l4_abe__mcpdm_dma, &omap44xx_l4_per__mcspi1, &omap44xx_l4_per__mcspi2, &omap44xx_l4_per__mcspi3, @@ -4913,13 +4836,9 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__timer3, &omap44xx_l4_per__timer4, &omap44xx_l4_abe__timer5, - &omap44xx_l4_abe__timer5_dma, &omap44xx_l4_abe__timer6, - &omap44xx_l4_abe__timer6_dma, &omap44xx_l4_abe__timer7, - &omap44xx_l4_abe__timer7_dma, &omap44xx_l4_abe__timer8, - &omap44xx_l4_abe__timer8_dma, &omap44xx_l4_per__timer9, &omap44xx_l4_per__timer10, &omap44xx_l4_per__timer11, diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c index e829664e6a6c..290213f2cbe3 100644 --- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c @@ -334,6 +334,235 @@ static struct omap_hwmod omap54xx_dmic_hwmod = { }; /* + * 'dss' class + * display sub-system + */ +static struct omap_hwmod_class_sysconfig omap54xx_dss_sysc = { + .rev_offs = 0x0000, + .syss_offs = 0x0014, + .sysc_flags = SYSS_HAS_RESET_STATUS, +}; + +static struct omap_hwmod_class omap54xx_dss_hwmod_class = { + .name = "dss", + .sysc = &omap54xx_dss_sysc, + .reset = omap_dss_reset, +}; + +/* dss */ +static struct omap_hwmod_opt_clk dss_opt_clks[] = { + { .role = "32khz_clk", .clk = "dss_32khz_clk" }, + { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_hwmod = { + .name = "dss_core", + .class = &omap54xx_dss_hwmod_class, + .clkdm_name = "dss_clkdm", + .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP54XX_RM_DSS_DSS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, + .opt_clks = dss_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_opt_clks), +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap54xx_dispc_sysc, +}; + +/* dss_dispc */ +static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +/* dss_dispc dev_attr */ +static struct omap_dss_dispc_dev_attr dss_dispc_dev_attr = { + .has_framedonetv_irq = 1, + .manager_count = 4, +}; + +static struct omap_hwmod omap54xx_dss_dispc_hwmod = { + .name = "dss_dispc", + .class = &omap54xx_dispc_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dispc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), + .dev_attr = &dss_dispc_dev_attr, +}; + +/* + * 'dsi1' class + * display serial interface controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_dsi1_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_dsi1_hwmod_class = { + .name = "dsi1", + .sysc = &omap54xx_dsi1_sysc, +}; + +/* dss_dsi1_a */ +static struct omap_hwmod_opt_clk dss_dsi1_a_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_dsi1_a_hwmod = { + .name = "dss_dsi1", + .class = &omap54xx_dsi1_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dsi1_a_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks), +}; + +/* dss_dsi1_c */ +static struct omap_hwmod_opt_clk dss_dsi1_c_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_dsi1_c_hwmod = { + .name = "dss_dsi2", + .class = &omap54xx_dsi1_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_dss_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_dsi1_c_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks), +}; + +/* + * 'hdmi' class + * hdmi controller + */ + +static struct omap_hwmod_class_sysconfig omap54xx_hdmi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .sysc_flags = (SYSC_HAS_RESET_STATUS | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + SIDLE_SMART_WKUP), + .sysc_fields = &omap_hwmod_sysc_type2, +}; + +static struct omap_hwmod_class omap54xx_hdmi_hwmod_class = { + .name = "hdmi", + .sysc = &omap54xx_hdmi_sysc, +}; + +static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + +static struct omap_hwmod omap54xx_dss_hdmi_hwmod = { + .name = "dss_hdmi", + .class = &omap54xx_hdmi_hwmod_class, + .clkdm_name = "dss_clkdm", + .main_clk = "dss_48mhz_clk", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_hdmi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap54xx_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap54xx_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap54xx_rfbi_sysc, +}; + +/* dss_rfbi */ +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "l3_iclk_div" }, +}; + +static struct omap_hwmod omap54xx_dss_rfbi_hwmod = { + .name = "dss_rfbi", + .class = &omap54xx_rfbi_hwmod_class, + .clkdm_name = "dss_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP54XX_CM_DSS_DSS_CLKCTRL_OFFSET, + .flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT, + }, + }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), +}; + +/* * 'emif' class * external memory interface no1 (wrapper) */ @@ -1974,6 +2203,54 @@ static struct omap_hwmod_ocp_if omap54xx_l4_abe__dmic = { .user = OCP_USER_MPU, }; +/* l3_main_2 -> dss */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dispc */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dispc = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dispc_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dsi1_a */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_a = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dsi1_a_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_dsi1_c */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_dsi1_c = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_dsi1_c_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_hdmi */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_hdmi = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_hdmi_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + +/* l3_main_2 -> dss_rfbi */ +static struct omap_hwmod_ocp_if omap54xx_l3_main_2__dss_rfbi = { + .master = &omap54xx_l3_main_2_hwmod, + .slave = &omap54xx_dss_rfbi_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + /* mpu -> emif1 */ static struct omap_hwmod_ocp_if omap54xx_mpu__emif1 = { .master = &omap54xx_mpu_hwmod, @@ -2427,6 +2704,12 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = { &omap54xx_l4_cfg__dma_system, &omap54xx_l4_abe__dmic, &omap54xx_l4_cfg__mmu_dsp, + &omap54xx_l3_main_2__dss, + &omap54xx_l3_main_2__dss_dispc, + &omap54xx_l3_main_2__dss_dsi1_a, + &omap54xx_l3_main_2__dss_dsi1_c, + &omap54xx_l3_main_2__dss_hdmi, + &omap54xx_l3_main_2__dss_rfbi, &omap54xx_mpu__emif1, &omap54xx_mpu__emif2, &omap54xx_l4_wkup__gpio1, diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 615e5b1fb025..6bf626700557 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -46,15 +46,8 @@ static bool is_offset_valid; static u8 smps_offset; -/* - * Flag to ensure Smartreflex bit in TWL - * being cleared in board file is not overwritten. - */ -static bool __initdata twl_sr_enable_autoinit; -#define TWL4030_DCDC_GLOBAL_CFG 0x06 #define REG_SMPS_OFFSET 0xE0 -#define SMARTREFLEX_ENABLE BIT(3) static unsigned long twl4030_vsel_to_uv(const u8 vsel) { @@ -251,18 +244,6 @@ int __init omap3_twl_init(void) if (!cpu_is_omap34xx()) return -ENODEV; - /* - * The smartreflex bit on twl4030 specifies if the setting of voltage - * is done over the I2C_SR path. Since this setting is independent of - * the actual usage of smartreflex AVS module, we enable TWL SR bit - * by default irrespective of whether smartreflex AVS module is enabled - * on the OMAP side or not. This is because without this bit enabled, - * the voltage scaling through vp forceupdate/bypass mechanism of - * voltage scaling will not function on TWL over I2C_SR. - */ - if (!twl_sr_enable_autoinit) - omap3_twl_set_sr_bit(true); - voltdm = voltdm_lookup("mpu_iva"); omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); @@ -271,44 +252,3 @@ int __init omap3_twl_init(void) return 0; } - -/** - * omap3_twl_set_sr_bit() - Set/Clear SR bit on TWL - * @enable: enable SR mode in twl or not - * - * If 'enable' is true, enables Smartreflex bit on TWL 4030 to make sure - * voltage scaling through OMAP SR works. Else, the smartreflex bit - * on twl4030 is cleared as there are platforms which use OMAP3 and T2 but - * use Synchronized Scaling Hardware Strategy (ENABLE_VMODE=1) and Direct - * Strategy Software Scaling Mode (ENABLE_VMODE=0), for setting the voltages, - * in those scenarios this bit is to be cleared (enable = false). - * - * Returns 0 on success, error is returned if I2C read/write fails. - */ -int __init omap3_twl_set_sr_bit(bool enable) -{ - u8 temp; - int ret; - if (twl_sr_enable_autoinit) - pr_warning("%s: unexpected multiple calls\n", __func__); - - ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp, - TWL4030_DCDC_GLOBAL_CFG); - if (ret) - goto err; - - if (enable) - temp |= SMARTREFLEX_ENABLE; - else - temp &= ~SMARTREFLEX_ENABLE; - - ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp, - TWL4030_DCDC_GLOBAL_CFG); - if (!ret) { - twl_sr_enable_autoinit = true; - return 0; - } -err: - pr_err("%s: Error access to TWL4030 (%d)\n", __func__, ret); - return ret; -} diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index e1b41416fbf1..828aee9ea6a8 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -32,11 +32,13 @@ #include "pm.h" #include "twl-common.h" +#ifdef CONFIG_SUSPEND /* * omap_pm_suspend: points to a function that does the SoC-specific * suspend work */ -int (*omap_pm_suspend)(void); +static int (*omap_pm_suspend)(void); +#endif #ifdef CONFIG_PM /** @@ -243,6 +245,15 @@ static const struct platform_suspend_ops omap_pm_ops = { .valid = suspend_valid_only_mem, }; +/** + * omap_common_suspend_init - Set common suspend routines for OMAP SoCs + * @pm_suspend: function pointer to SoC specific suspend function + */ +void omap_common_suspend_init(void *pm_suspend) +{ + omap_pm_suspend = pm_suspend; + suspend_set_ops(&omap_pm_ops); +} #endif /* CONFIG_SUSPEND */ static void __init omap3_init_voltages(void) @@ -287,32 +298,24 @@ omap_postcore_initcall(omap2_common_pm_init); int __init omap2_common_pm_late_init(void) { - /* - * In the case of DT, the PMIC and SR initialization will be done using - * a completely different mechanism. - * Disable this part if a DT blob is available. - */ - if (!of_have_populated_dt()) { - - /* Init the voltage layer */ - omap_pmic_late_init(); - omap_voltage_late_init(); + if (of_have_populated_dt()) { + omap3_twl_init(); + omap4_twl_init(); + } - /* Initialize the voltages */ - omap3_init_voltages(); - omap4_init_voltages(); + /* Init the voltage layer */ + omap_pmic_late_init(); + omap_voltage_late_init(); - /* Smartreflex device init */ - omap_devinit_smartreflex(); + /* Initialize the voltages */ + omap3_init_voltages(); + omap4_init_voltages(); - } + /* Smartreflex device init */ + omap_devinit_smartreflex(); /* cpufreq dummy device instantiation */ omap_init_cpufreq(); -#ifdef CONFIG_SUSPEND - suspend_set_ops(&omap_pm_ops); -#endif - return 0; } diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index d4d0fce325c7..e150102d6c06 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -34,7 +34,6 @@ extern void *omap3_secure_ram_storage; extern void omap3_pm_off_mode_enable(int); extern void omap_sram_idle(void); extern int omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused); -extern int (*omap_pm_suspend)(void); #if defined(CONFIG_PM_OPP) extern int omap3_opp_init(void); @@ -147,4 +146,11 @@ static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { *tstart = * static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { } #endif +#ifdef CONFIG_SUSPEND +void omap_common_suspend_init(void *pm_suspend); +#else +static inline void omap_common_suspend_init(void *pm_suspend) +{ +} +#endif /* CONFIG_SUSPEND */ #endif diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8c0759496c8d..a5ea988ff340 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -229,9 +229,7 @@ static void __init prcm_setup_regs(void) clkdm_for_each(omap_pm_clkdms_setup, NULL); clkdm_add_wkdep(mpu_clkdm, wkup_clkdm); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap2_enter_full_retention; -#endif + omap_common_suspend_init(omap2_enter_full_retention); /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk * stabilisation */ diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 87099bb6de69..507d8eeaab95 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -50,6 +50,7 @@ #include "sdrc.h" #include "sram.h" #include "control.h" +#include "vc.h" /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -288,6 +289,9 @@ void omap_sram_idle(void) } } + /* Configure PMIC signaling for I2C4 or sys_off_mode */ + omap3_vc_set_pmic_signaling(core_next_state); + omap3_intc_prepare_idle(); /* @@ -391,7 +395,8 @@ restore: return ret; } - +#else +#define omap3_pm_suspend NULL #endif /* CONFIG_SUSPEND */ @@ -705,9 +710,7 @@ int __init omap3_pm_init(void) per_clkdm = clkdm_lookup("per_clkdm"); wkup_clkdm = clkdm_lookup("wkup_clkdm"); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap3_pm_suspend; -#endif + omap_common_suspend_init(omap3_pm_suspend); arm_pm_idle = omap3_pm_idle; omap3_idle_init(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index eefb30cfcabd..0dda6cf8b855 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -96,6 +96,8 @@ static int omap4_pm_suspend(void) return 0; } +#else +#define omap4_pm_suspend NULL #endif /* CONFIG_SUSPEND */ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused) @@ -251,9 +253,7 @@ int __init omap4_pm_init(void) (void) clkdm_for_each(omap_pm_clkdms_setup, NULL); -#ifdef CONFIG_SUSPEND - omap_pm_suspend = omap4_pm_suspend; -#endif + omap_common_suspend_init(omap4_pm_suspend); /* Overwrite the default cpu_do_idle() */ arm_pm_idle = omap_default_idle; diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h index cebad565ed37..106132db532b 100644 --- a/arch/arm/mach-omap2/prm-regbits-34xx.h +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h @@ -123,8 +123,15 @@ #define OMAP3430_GLOBAL_SW_RST_SHIFT 1 #define OMAP3430_GLOBAL_COLD_RST_SHIFT 0 #define OMAP3430_GLOBAL_COLD_RST_MASK (1 << 0) -#define OMAP3430_SEL_OFF_MASK (1 << 3) -#define OMAP3430_AUTO_OFF_MASK (1 << 2) +#define OMAP3430_PRM_VOLTCTRL_SEL_VMODE (1 << 4) +#define OMAP3430_PRM_VOLTCTRL_SEL_OFF (1 << 3) +#define OMAP3430_PRM_VOLTCTRL_AUTO_OFF (1 << 2) +#define OMAP3430_PRM_VOLTCTRL_AUTO_RET (1 << 1) +#define OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP (1 << 0) #define OMAP3430_SETUP_TIME2_MASK (0xffff << 16) #define OMAP3430_SETUP_TIME1_MASK (0xffff << 0) +#define OMAP3430_PRM_POLCTRL_OFFMODE_POL (1 << 3) +#define OMAP3430_PRM_POLCTRL_CLKOUT_POL (1 << 2) +#define OMAP3430_PRM_POLCTRL_CLKREQ_POL (1 << 1) +#define OMAP3430_PRM_POLCTRL_EXTVOL_POL (1 << 0) #endif diff --git a/arch/arm/mach-omap2/soc.h b/arch/arm/mach-omap2/soc.h index 30abcc8b20e0..de2a34c423a7 100644 --- a/arch/arm/mach-omap2/soc.h +++ b/arch/arm/mach-omap2/soc.h @@ -459,10 +459,15 @@ IS_OMAP_TYPE(3430, 0x3430) #define OMAP5430_REV_ES2_0 (OMAP54XX_CLASS | (0x30 << 16) | (0x20 << 8)) #define OMAP5432_REV_ES2_0 (OMAP54XX_CLASS | (0x32 << 16) | (0x20 << 8)) +#define DRA7XX_CLASS 0x07000000 +#define DRA752_REV_ES1_0 (DRA7XX_CLASS | (0x52 << 16) | (0x10 << 8)) +#define DRA752_REV_ES1_1 (DRA7XX_CLASS | (0x52 << 16) | (0x11 << 8)) + void omap2xxx_check_revision(void); void omap3xxx_check_revision(void); void omap4xxx_check_revision(void); void omap5xxx_check_revision(void); +void dra7xxx_check_revision(void); void omap3xxx_check_features(void); void ti81xx_check_features(void); void am33xx_check_features(void); diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 267f204559c3..a4628a9e760c 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -220,10 +220,126 @@ static inline u32 omap_usec_to_32k(u32 usec) return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL); } -/* Set oscillator setup time for omap3 */ -static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm) +struct omap3_vc_timings { + u32 voltsetup1; + u32 voltsetup2; +}; + +struct omap3_vc { + struct voltagedomain *vd; + u32 voltctrl; + u32 voltsetup1; + u32 voltsetup2; + struct omap3_vc_timings timings[2]; +}; +static struct omap3_vc vc; + +void omap3_vc_set_pmic_signaling(int core_next_state) +{ + struct voltagedomain *vd = vc.vd; + struct omap3_vc_timings *c = vc.timings; + u32 voltctrl, voltsetup1, voltsetup2; + + voltctrl = vc.voltctrl; + voltsetup1 = vc.voltsetup1; + voltsetup2 = vc.voltsetup2; + + switch (core_next_state) { + case PWRDM_POWER_OFF: + voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_RET | + OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP); + voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_OFF; + if (voltctrl & OMAP3430_PRM_VOLTCTRL_SEL_OFF) + voltsetup2 = c->voltsetup2; + else + voltsetup1 = c->voltsetup1; + break; + case PWRDM_POWER_RET: + default: + c++; + voltctrl &= ~(OMAP3430_PRM_VOLTCTRL_AUTO_OFF | + OMAP3430_PRM_VOLTCTRL_AUTO_SLEEP); + voltctrl |= OMAP3430_PRM_VOLTCTRL_AUTO_RET; + voltsetup1 = c->voltsetup1; + break; + } + + if (voltctrl != vc.voltctrl) { + vd->write(voltctrl, OMAP3_PRM_VOLTCTRL_OFFSET); + vc.voltctrl = voltctrl; + } + if (voltsetup1 != vc.voltsetup1) { + vd->write(c->voltsetup1, + OMAP3_PRM_VOLTSETUP1_OFFSET); + vc.voltsetup1 = voltsetup1; + } + if (voltsetup2 != vc.voltsetup2) { + vd->write(c->voltsetup2, + OMAP3_PRM_VOLTSETUP2_OFFSET); + vc.voltsetup2 = voltsetup2; + } +} + +#define PRM_POLCTRL_TWL_MASK (OMAP3430_PRM_POLCTRL_CLKREQ_POL | \ + OMAP3430_PRM_POLCTRL_CLKREQ_POL) +#define PRM_POLCTRL_TWL_VAL OMAP3430_PRM_POLCTRL_CLKREQ_POL + +/* + * Configure signal polarity for sys_clkreq and sys_off_mode pins + * as the default values are wrong and can cause the system to hang + * if any twl4030 scripts are loaded. + */ +static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm) +{ + u32 val; + + if (vc.vd) + return; + + vc.vd = voltdm; + + val = voltdm->read(OMAP3_PRM_POLCTRL_OFFSET); + if (!(val & OMAP3430_PRM_POLCTRL_CLKREQ_POL) || + (val & OMAP3430_PRM_POLCTRL_CLKREQ_POL)) { + val |= OMAP3430_PRM_POLCTRL_CLKREQ_POL; + val &= ~OMAP3430_PRM_POLCTRL_OFFMODE_POL; + pr_debug("PM: fixing sys_clkreq and sys_off_mode polarity to 0x%x\n", + val); + voltdm->write(val, OMAP3_PRM_POLCTRL_OFFSET); + } + + /* + * By default let's use I2C4 signaling for retention idle + * and sys_off_mode pin signaling for off idle. This way we + * have sys_clk_req pin go down for retention and both + * sys_clk_req and sys_off_mode pins will go down for off + * idle. And we can also scale voltages to zero for off-idle. + * Note that no actual voltage scaling during off-idle will + * happen unless the board specific twl4030 PMIC scripts are + * loaded. + */ + val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); + if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) { + val |= OMAP3430_PRM_VOLTCTRL_SEL_OFF; + pr_debug("PM: setting voltctrl sys_off_mode signaling to 0x%x\n", + val); + voltdm->write(val, OMAP3_PRM_VOLTCTRL_OFFSET); + } + vc.voltctrl = val; + + omap3_vc_set_pmic_signaling(PWRDM_POWER_ON); +} + +static void omap3_init_voltsetup1(struct voltagedomain *voltdm, + struct omap3_vc_timings *c, u32 idle) { - voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET); + unsigned long val; + + val = (voltdm->vc_param->on - idle) / voltdm->pmic->slew_rate; + val *= voltdm->sys_clk.rate / 8 / 1000000 + 1; + val <<= __ffs(voltdm->vfsm->voltsetup_mask); + c->voltsetup1 &= ~voltdm->vfsm->voltsetup_mask; + c->voltsetup1 |= val; } /** @@ -236,37 +352,21 @@ static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm) * or retention. Off mode has additionally an option to use sys_off_mode * pad, which uses a global signal to program the whole power IC to * off-mode. + * + * Note that pmic is not controlling the voltage scaling during + * retention signaled over I2C4, so we can keep voltsetup2 as 0. + * And the oscillator is not shut off over I2C4, so no need to + * set clksetup. */ -static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode) +static void omap3_set_i2c_timings(struct voltagedomain *voltdm) { - unsigned long voltsetup1; - u32 tgt_volt; - - /* - * Oscillator is shut down only if we are using sys_off_mode pad, - * thus we set a minimal setup time here - */ - omap3_set_clksetup(1, voltdm); + struct omap3_vc_timings *c = vc.timings; - if (off_mode) - tgt_volt = voltdm->vc_param->off; - else - tgt_volt = voltdm->vc_param->ret; - - voltsetup1 = (voltdm->vc_param->on - tgt_volt) / - voltdm->pmic->slew_rate; - - voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1; - - voltdm->rmw(voltdm->vfsm->voltsetup_mask, - voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask), - voltdm->vfsm->voltsetup_reg); - - /* - * pmic is not controlling the voltage scaling during retention, - * thus set voltsetup2 to 0 - */ - voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET); + /* Configure PRWDM_POWER_OFF over I2C4 */ + omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->off); + c++; + /* Configure PRWDM_POWER_RET over I2C4 */ + omap3_init_voltsetup1(voltdm, c, voltdm->vc_param->ret); } /** @@ -275,69 +375,49 @@ static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode) * * Calculates and sets up off-mode timings for a channel. Off-mode * can use either I2C based voltage scaling, or alternatively - * sys_off_mode pad can be used to send a global command to power IC. - * This function first checks which mode is being used, and calls - * omap3_set_i2c_timings() if the system is using I2C control mode. + * sys_off_mode pad can be used to send a global command to power IC.n, * sys_off_mode has the additional benefit that voltages can be * scaled to zero volt level with TWL4030 / TWL5030, I2C can only * scale to 600mV. + * + * Note that omap is not controlling the voltage scaling during + * off idle signaled by sys_off_mode, so we can keep voltsetup1 + * as 0. */ static void omap3_set_off_timings(struct voltagedomain *voltdm) { - unsigned long clksetup; - unsigned long voltsetup2; - unsigned long voltsetup2_old; - u32 val; - u32 tstart, tshut; + struct omap3_vc_timings *c = vc.timings; + u32 tstart, tshut, clksetup, voltoffset; - /* check if sys_off_mode is used to control off-mode voltages */ - val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET); - if (!(val & OMAP3430_SEL_OFF_MASK)) { - /* No, omap is controlling them over I2C */ - omap3_set_i2c_timings(voltdm, true); + if (c->voltsetup2) return; - } omap_pm_get_oscillator(&tstart, &tshut); - omap3_set_clksetup(tstart, voltdm); - - clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET); - - /* voltsetup 2 in us */ - voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate; - - /* convert to 32k clk cycles */ - voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000); - - voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET); - - /* - * Update voltsetup2 if higher than current value (needed because - * we have multiple channels with different ramp times), also - * update voltoffset always to value recommended by TRM - */ - if (voltsetup2 > voltsetup2_old) { - voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET); - voltdm->write(clksetup - voltsetup2, - OMAP3_PRM_VOLTOFFSET_OFFSET); - } else - voltdm->write(clksetup - voltsetup2_old, - OMAP3_PRM_VOLTOFFSET_OFFSET); + if (tstart == ULONG_MAX) { + pr_debug("PM: oscillator start-up time not initialized, using 10ms\n"); + clksetup = omap_usec_to_32k(10000); + } else { + clksetup = omap_usec_to_32k(tstart); + } /* - * omap is not controlling voltage scaling during off-mode, - * thus set voltsetup1 to 0 + * For twl4030 errata 27, we need to allow minimum ~488.32 us wait to + * switch from HFCLKIN to internal oscillator. That means timings + * have voltoffset fixed to 0xa in rounded up 32 KiHz cycles. And + * that means we can calculate the value based on the oscillator + * start-up time since voltoffset2 = clksetup - voltoffset. */ - voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0, - voltdm->vfsm->voltsetup_reg); - - /* voltoffset must be clksetup minus voltsetup2 according to TRM */ - voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET); + voltoffset = omap_usec_to_32k(488); + c->voltsetup2 = clksetup - voltoffset; + voltdm->write(clksetup, OMAP3_PRM_CLKSETUP_OFFSET); + voltdm->write(voltoffset, OMAP3_PRM_VOLTOFFSET_OFFSET); } static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) { + omap3_vc_init_pmic_signaling(voltdm); omap3_set_off_timings(voltdm); + omap3_set_i2c_timings(voltdm); } /** diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 91c8d75bf2ea..cdbdd78e755e 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -117,6 +117,9 @@ extern struct omap_vc_param omap4_mpu_vc_data; extern struct omap_vc_param omap4_iva_vc_data; extern struct omap_vc_param omap4_core_vc_data; +void omap3_vc_set_pmic_signaling(int core_next_state); + + void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 14f2cae4109c..2412efb6cdd9 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,6 +5,11 @@ menu "Orion Implementations" config ARCH_ORION5X_DT bool "Marvell Orion5x Flattened Device Tree" select USE_OF + select ORION_CLK + select ORION_IRQCHIP + select ORION_TIMER + select PINCTRL + select PINCTRL_ORION help Say 'Y' here if you want your kernel to support the Marvell Orion5x using flattened device tree. @@ -23,6 +28,14 @@ config MACH_RD88F5182 Say 'Y' here if you want your kernel to support the Marvell Orion-NAS (88F5182) RD2 +config MACH_RD88F5182_DT + bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)" + select ARCH_ORION5X_DT + select I2C_BOARDINFO + help + Say 'Y' here if you want your kernel to support the Marvell + Orion-NAS (88F5182) RD2, Flattened Device Tree. + config MACH_KUROBOX_PRO bool "KuroBox Pro" select I2C_BOARDINFO @@ -102,28 +115,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2_DT - bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" - select I2C_BOARDINFO +config MACH_D2NET_DT + bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)" select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2 (Flattened Device Tree). - -config MACH_D2NET - bool "LaCie d2 Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the LaCie d2 Network NAS. -config MACH_BIGDISK - bool "LaCie Big Disk Network" - select I2C_BOARDINFO - help - Say 'Y' here if you want your kernel to support the - LaCie Big Disk Network NAS. - config MACH_NET2BIG bool "LaCie 2Big Network" select I2C_BOARDINFO @@ -131,8 +129,9 @@ config MACH_NET2BIG Say 'Y' here if you want your kernel to support the LaCie 2Big Network NAS. -config MACH_MSS2 - bool "Maxtor Shared Storage II" +config MACH_MSS2_DT + bool "Maxtor Shared Storage II (Flattened Device Tree)" + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 45da805fb236..a40b5c9a58c4 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,10 +12,7 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_D2NET) += d2net-setup.o -obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o -obj-$(CONFIG_MACH_MSS2) += mss2-setup.o obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o @@ -23,4 +20,6 @@ obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o -obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o +obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o +obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o +obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c new file mode 100644 index 000000000000..8a7284124153 --- /dev/null +++ b/arch/arm/mach-orion5x/board-d2net.c @@ -0,0 +1,109 @@ +/* + * arch/arm/mach-orion5x/board-d2net.c + * + * LaCie d2Network and Big Disk Network NAS setup + * + * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <plat/orion-gpio.h> +#include "common.h" + +/***************************************************************************** + * LaCie d2 Network Info + ****************************************************************************/ + +/***************************************************************************** + * GPIO LED's + ****************************************************************************/ + +/* + * The blue front LED is wired to the CPLD and can blink in relation with the + * SATA activity. + * + * The following array detail the different LED registers and the combination + * of their possible values: + * + * led_off | blink_ctrl | SATA active | LED state + * | | | + * 1 | x | x | off + * 0 | 0 | 0 | off + * 0 | 1 | 0 | blink (rate 300ms) + * 0 | x | 1 | on + * + * Notes: The blue and the red front LED's can't be on at the same time. + * Red LED have priority. + */ + +#define D2NET_GPIO_RED_LED 6 +#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 +#define D2NET_GPIO_BLUE_LED_OFF 23 + +static struct gpio_led d2net_leds[] = { + { + .name = "d2net:blue:sata", + .default_trigger = "default-on", + .gpio = D2NET_GPIO_BLUE_LED_OFF, + .active_low = 1, + }, + { + .name = "d2net:red:fail", + .gpio = D2NET_GPIO_RED_LED, + }, +}; + +static struct gpio_led_platform_data d2net_led_data = { + .num_leds = ARRAY_SIZE(d2net_leds), + .leds = d2net_leds, +}; + +static struct platform_device d2net_gpio_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &d2net_led_data, + }, +}; + +static void __init d2net_gpio_leds_init(void) +{ + int err; + + /* Configure register blink_ctrl to allow SATA activity LED blinking. */ + err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); + if (err == 0) { + err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); + if (err) + gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); + } + if (err) + pr_err("d2net: failed to configure blue LED blink GPIO\n"); + + platform_device_register(&d2net_gpio_leds); +} + +/***************************************************************************** + * General Setup + ****************************************************************************/ + +void __init d2net_init(void) +{ + d2net_gpio_leds_init(); + + pr_notice("d2net: Flash write are not yet supported.\n"); +} diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index c134a826070a..35d418faf8f1 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -15,10 +15,16 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/cpu.h> +#include <linux/mbus.h> +#include <linux/clk-provider.h> +#include <linux/clocksource.h> #include <asm/system_misc.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include <mach/orion5x.h> +#include <mach/bridge-regs.h> #include <plat/irq.h> +#include <plat/time.h> #include "common.h" static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { @@ -39,14 +45,13 @@ static void __init orion5x_dt_init(void) orion5x_id(&dev, &rev, &dev_name); printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + BUG_ON(mvebu_mbus_dt_init()); + /* * Setup Orion address map */ orion5x_setup_wins(); - /* Setup root of clk tree */ - clk_init(); - /* * Don't issue "Wait for Interrupt" instruction if we are * running on D0 5281 silicon. @@ -56,8 +61,8 @@ static void __init orion5x_dt_init(void) cpu_idle_poll_ctrl(true); } - if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) - edmini_v2_init(); + if (of_machine_is_compatible("maxtor,shared-storage-2")) + mss2_init(); of_platform_populate(NULL, of_default_bus_match_table, orion5x_auxdata_lookup, NULL); @@ -71,9 +76,6 @@ static const char *orion5x_dt_compat[] = { DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion_dt_init_irq, - .init_time = orion5x_timer_init, .init_machine = orion5x_dt_init, .restart = orion5x_restart, .dt_compat = orion5x_dt_compat, diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c new file mode 100644 index 000000000000..66f9c3ba86cc --- /dev/null +++ b/arch/arm/mach-orion5x/board-mss2.c @@ -0,0 +1,90 @@ +/* + * Maxtor Shared Storage II Board Setup + * + * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include <mach/bridge-regs.h> +#include "common.h" + +/***************************************************************************** + * Maxtor Shared Storage II Info + ****************************************************************************/ + +/**************************************************************************** + * PCI setup + ****************************************************************************/ +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + return -1; +} + +static struct hw_pci mss2_pci __initdata = { + .nr_controllers = 2, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = mss2_pci_map_irq, +}; + +static int __init mss2_pci_init(void) +{ + if (machine_is_mss2()) + pci_common_init(&mss2_pci); + + return 0; +} +subsys_initcall(mss2_pci_init); + +/***************************************************************************** + * MSS2 power off method + ****************************************************************************/ +/* + * On the Maxtor Shared Storage II, the shutdown process is the following : + * - Userland modifies U-boot env to tell U-boot to go idle at next boot + * - The board reboots + * - U-boot starts and go into an idle mode until the user press "power" + */ +static void mss2_power_off(void) +{ + u32 reg; + + /* + * Enable and issue soft reset + */ + reg = readl(RSTOUTn_MASK); + reg |= 1 << 2; + writel(reg, RSTOUTn_MASK); + + reg = readl(CPU_SOFT_RESET); + reg |= 1; + writel(reg, CPU_SOFT_RESET); +} + +void __init mss2_init(void) +{ + /* register mss2 specific power-off method */ + pm_power_off = mss2_power_off; +} diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c new file mode 100644 index 000000000000..270824b0e50f --- /dev/null +++ b/arch/arm/mach-orion5x/board-rd88f5182.c @@ -0,0 +1,116 @@ +/* + * arch/arm/mach-orion5x/rd88f5182-setup.c + * + * Marvell Orion-NAS Reference Design Setup + * + * Maintainer: Ronen Shitrit <rshitrit@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/pci.h> +#include <mach/orion5x.h> +#include "common.h" + +/***************************************************************************** + * RD-88F5182 Info + ****************************************************************************/ + +/* + * PCI + */ + +#define RD88F5182_PCI_SLOT0_OFFS 7 +#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7 +#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6 + +/***************************************************************************** + * PCI + ****************************************************************************/ + +static void __init rd88f5182_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; + if (gpio_request(pin, "PCI IntA") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin); + } + + pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; + if (gpio_request(pin, "PCI IntB") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to " + "set_irq_type pin %d\n", pin); + gpio_free(pin); + } + } else { + printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin); + } +} + +static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - RD88F5182_PCI_SLOT0_OFFS) { + case 0: + if (pin == 1) + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN); + else + return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN); + default: + return -1; + } +} + +static struct hw_pci rd88f5182_pci __initdata = { + .nr_controllers = 2, + .preinit = rd88f5182_pci_preinit, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = rd88f5182_pci_map_irq, +}; + +static int __init rd88f5182_pci_init(void) +{ + if (of_machine_is_compatible("marvell,rd-88f5182-nas")) + pci_common_init(&rd88f5182_pci); + + return 0; +} + +subsys_initcall(rd88f5182_pci_init); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 7548db2bfb8a..26d6f34b6027 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -64,17 +64,16 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -/* board init functions for boards not fully converted to fdt */ -#ifdef CONFIG_MACH_EDMINI_V2_DT -void edmini_v2_init(void); -#else -static inline void edmini_v2_init(void) {}; -#endif - struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); +#ifdef CONFIG_MACH_MSS2_DT +extern void mss2_init(void); +#else +static inline void mss2_init(void) {} +#endif + /***************************************************************************** * Helpers to access Orion registers ****************************************************************************/ diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c deleted file mode 100644 index 8f68b745c1d5..000000000000 --- a/arch/arm/mach-orion5x/d2net-setup.c +++ /dev/null @@ -1,365 +0,0 @@ -/* - * arch/arm/mach-orion5x/d2net-setup.c - * - * LaCie d2Network and Big Disk Network NAS setup - * - * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <plat/orion-gpio.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * LaCie d2 Network Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define D2NET_NOR_BOOT_BASE 0xfff80000 -#define D2NET_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on Boot Device - ****************************************************************************/ - -/* - * TODO: Check write support on flash MX29LV400CBTC-70G - */ - -static struct mtd_partition d2net_partitions[] = { - { - .name = "Full512kb", - .size = MTDPART_SIZ_FULL, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data d2net_nor_flash_data = { - .width = 1, - .parts = d2net_partitions, - .nr_parts = ARRAY_SIZE(d2net_partitions), -}; - -static struct resource d2net_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = D2NET_NOR_BOOT_BASE, - .end = D2NET_NOR_BOOT_BASE - + D2NET_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device d2net_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &d2net_nor_flash_data, - }, - .num_resources = 1, - .resource = &d2net_nor_flash_resource, -}; - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data d2net_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * I2C devices - ****************************************************************************/ - -/* - * i2c addr | chip | description - * 0x32 | Ricoh 5C372b | RTC - * 0x3e | GMT G762 | PWM fan controller - * 0x50 | HT24LC08 | eeprom (1kB) - * - * TODO: Add G762 support to the g760a driver. - */ -static struct i2c_board_info __initdata d2net_i2c_devices[] = { - { - I2C_BOARD_INFO("rs5c372b", 0x32), - }, { - I2C_BOARD_INFO("24c08", 0x50), - }, -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data d2net_sata_data = { - .n_ports = 2, -}; - -#define D2NET_GPIO_SATA0_POWER 3 -#define D2NET_GPIO_SATA1_POWER 12 - -static void __init d2net_sata_power_init(void) -{ - int err; - - err = gpio_request(D2NET_GPIO_SATA0_POWER, "SATA0 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA0_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA0_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA0 power GPIO\n"); - - err = gpio_request(D2NET_GPIO_SATA1_POWER, "SATA1 power"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_SATA1_POWER, 1); - if (err) - gpio_free(D2NET_GPIO_SATA1_POWER); - } - if (err) - pr_err("d2net: failed to configure SATA1 power GPIO\n"); -} - -/***************************************************************************** - * GPIO LED's - ****************************************************************************/ - -/* - * The blue front LED is wired to the CPLD and can blink in relation with the - * SATA activity. - * - * The following array detail the different LED registers and the combination - * of their possible values: - * - * led_off | blink_ctrl | SATA active | LED state - * | | | - * 1 | x | x | off - * 0 | 0 | 0 | off - * 0 | 1 | 0 | blink (rate 300ms) - * 0 | x | 1 | on - * - * Notes: The blue and the red front LED's can't be on at the same time. - * Red LED have priority. - */ - -#define D2NET_GPIO_RED_LED 6 -#define D2NET_GPIO_BLUE_LED_BLINK_CTRL 16 -#define D2NET_GPIO_BLUE_LED_OFF 23 - -static struct gpio_led d2net_leds[] = { - { - .name = "d2net:blue:sata", - .default_trigger = "default-on", - .gpio = D2NET_GPIO_BLUE_LED_OFF, - .active_low = 1, - }, - { - .name = "d2net:red:fail", - .gpio = D2NET_GPIO_RED_LED, - }, -}; - -static struct gpio_led_platform_data d2net_led_data = { - .num_leds = ARRAY_SIZE(d2net_leds), - .leds = d2net_leds, -}; - -static struct platform_device d2net_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &d2net_led_data, - }, -}; - -static void __init d2net_gpio_leds_init(void) -{ - int err; - - /* Configure GPIO over MPP max number. */ - orion_gpio_set_valid(D2NET_GPIO_BLUE_LED_OFF, 1); - - /* Configure register blink_ctrl to allow SATA activity LED blinking. */ - err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink"); - if (err == 0) { - err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1); - if (err) - gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL); - } - if (err) - pr_err("d2net: failed to configure blue LED blink GPIO\n"); - - platform_device_register(&d2net_gpio_leds); -} - -/**************************************************************************** - * GPIO keys - ****************************************************************************/ - -#define D2NET_GPIO_PUSH_BUTTON 18 -#define D2NET_GPIO_POWER_SWITCH_ON 8 -#define D2NET_GPIO_POWER_SWITCH_OFF 9 - -#define D2NET_SWITCH_POWER_ON 0x1 -#define D2NET_SWITCH_POWER_OFF 0x2 - -static struct gpio_keys_button d2net_buttons[] = { - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_OFF, - .gpio = D2NET_GPIO_POWER_SWITCH_OFF, - .desc = "Power rocker switch (auto|off)", - .active_low = 0, - }, - { - .type = EV_SW, - .code = D2NET_SWITCH_POWER_ON, - .gpio = D2NET_GPIO_POWER_SWITCH_ON, - .desc = "Power rocker switch (on|auto)", - .active_low = 0, - }, - { - .type = EV_KEY, - .code = KEY_POWER, - .gpio = D2NET_GPIO_PUSH_BUTTON, - .desc = "Front Push Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data d2net_button_data = { - .buttons = d2net_buttons, - .nbuttons = ARRAY_SIZE(d2net_buttons), -}; - -static struct platform_device d2net_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &d2net_button_data, - }, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ - -static unsigned int d2net_mpp_modes[] __initdata = { - MPP0_GPIO, /* Board ID (bit 0) */ - MPP1_GPIO, /* Board ID (bit 1) */ - MPP2_GPIO, /* Board ID (bit 2) */ - MPP3_GPIO, /* SATA 0 power */ - MPP4_UNUSED, - MPP5_GPIO, /* Fan fail detection */ - MPP6_GPIO, /* Red front LED */ - MPP7_UNUSED, - MPP8_GPIO, /* Rear power switch (on|auto) */ - MPP9_GPIO, /* Rear power switch (auto|off) */ - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_GPIO, /* SATA 1 power */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_GPIO, /* Blue front LED blink control */ - MPP17_UNUSED, - MPP18_GPIO, /* Front button (0 = Released, 1 = Pushed ) */ - MPP19_UNUSED, - 0, - /* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */ - /* 23: Blue front LED off */ - /* 24: Inhibit board power off (0 = Disabled, 1 = Enabled) */ -}; - -#define D2NET_GPIO_INHIBIT_POWER_OFF 24 - -static void __init d2net_init(void) -{ - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - - orion5x_mpp_conf(d2net_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_eth_init(&d2net_eth_data); - orion5x_i2c_init(); - orion5x_uart0_init(); - - d2net_sata_power_init(); - orion5x_sata_init(&d2net_sata_data); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - D2NET_NOR_BOOT_BASE, - D2NET_NOR_BOOT_SIZE); - platform_device_register(&d2net_nor_flash); - - platform_device_register(&d2net_gpio_buttons); - - d2net_gpio_leds_init(); - - pr_notice("d2net: Flash write are not yet supported.\n"); - - i2c_register_board_info(0, d2net_i2c_devices, - ARRAY_SIZE(d2net_i2c_devices)); - - orion_gpio_set_valid(D2NET_GPIO_INHIBIT_POWER_OFF, 1); -} - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ - -#ifdef CONFIG_MACH_D2NET -MACHINE_START(D2NET, "LaCie d2 Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_BIGDISK -MACHINE_START(BIGDISK, "LaCie Big Disk Network") - .atag_offset = 0x100, - .init_machine = d2net_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END -#endif - diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c deleted file mode 100644 index f66c1b2ee8c1..000000000000 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * arch/arm/mach-orion5x/edmini_v2-setup.c - * - * LaCie Ethernet Disk mini V2 Setup - * - * Copyright (C) 2008 Christopher Moore <moore@free.fr> - * Copyright (C) 2008 Albert Aribaud <albert.aribaud@free.fr> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -/* - * TODO: add Orion USB device port init when kernel.org support is added. - * TODO: add flash write support: see below. - * TODO: add power-off support. - * TODO: add I2C EEPROM support. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mbus.h> -#include <linux/mtd/physmap.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include "common.h" -#include "mpp.h" - -/***************************************************************************** - * EDMINI_V2 Info - ****************************************************************************/ - -/* - * 512KB NOR flash Device bus boot chip select - */ - -#define EDMINI_V2_NOR_BOOT_BASE 0xfff80000 -#define EDMINI_V2_NOR_BOOT_SIZE SZ_512K - -/***************************************************************************** - * 512KB NOR Flash on BOOT Device - ****************************************************************************/ - -/* - * Currently the MTD code does not recognize the MX29LV400CBCT as a bottom - * -type device. This could cause risks of accidentally erasing critical - * flash sectors. We thus define a single, write-protected partition covering - * the whole flash. - * TODO: once the flash part TOP/BOTTOM detection issue is sorted out in the MTD - * code, break this into at least three partitions: 'u-boot code', 'u-boot - * environment' and 'whatever is left'. - */ - -static struct mtd_partition edmini_v2_partitions[] = { - { - .name = "Full512kb", - .size = 0x00080000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE, - }, -}; - -static struct physmap_flash_data edmini_v2_nor_flash_data = { - .width = 1, - .parts = edmini_v2_partitions, - .nr_parts = ARRAY_SIZE(edmini_v2_partitions), -}; - -static struct resource edmini_v2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = EDMINI_V2_NOR_BOOT_BASE, - .end = EDMINI_V2_NOR_BOOT_BASE - + EDMINI_V2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device edmini_v2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &edmini_v2_nor_flash_data, - }, - .num_resources = 1, - .resource = &edmini_v2_nor_flash_resource, -}; - -/***************************************************************************** - * RTC 5C372a on I2C bus - ****************************************************************************/ - -#define EDMINIV2_RTC_GPIO 3 - -static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { - I2C_BOARD_INFO("rs5c372a", 0x32), - .irq = 0, -}; - -/***************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int edminiv2_mpp_modes[] __initdata = { - MPP0_UNUSED, - MPP1_UNUSED, - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_UNUSED, - MPP5_UNUSED, - MPP6_UNUSED, - MPP7_UNUSED, - MPP8_UNUSED, - MPP9_UNUSED, - MPP10_UNUSED, - MPP11_UNUSED, - MPP12_SATA_LED, /* SATA 0 presence */ - MPP13_SATA_LED, /* SATA 1 presence */ - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - /* 16: Power LED control (0 = On, 1 = Off) */ - MPP16_GPIO, - /* 17: Power LED control select (0 = CPLD, 1 = GPIO16) */ - MPP17_GPIO, - /* 18: Power button status (0 = Released, 1 = Pressed) */ - MPP18_GPIO, - MPP19_UNUSED, - 0, -}; - -void __init edmini_v2_init(void) -{ - orion5x_mpp_conf(edminiv2_mpp_modes); - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - EDMINI_V2_NOR_BOOT_BASE, - EDMINI_V2_NOR_BOOT_SIZE); - platform_device_register(&edmini_v2_nor_flash); - - pr_notice("edmini_v2: USB device port, flash write and power-off " - "are not yet supported.\n"); - - /* Get RTC IRQ and register the chip */ - if (gpio_request(EDMINIV2_RTC_GPIO, "rtc") == 0) { - if (gpio_direction_input(EDMINIV2_RTC_GPIO) == 0) - edmini_v2_i2c_rtc.irq = gpio_to_irq(EDMINIV2_RTC_GPIO); - else - gpio_free(EDMINIV2_RTC_GPIO); - } - - if (edmini_v2_i2c_rtc.irq == 0) - pr_warning("edmini_v2: failed to get RTC IRQ\n"); - - i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); -} diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index 9654b0cc5892..cd4bac4d7e43 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -16,6 +16,7 @@ #include <mach/bridge-regs.h> #include <plat/orion-gpio.h> #include <plat/irq.h> +#include <asm/exception.h> #include "common.h" static int __initdata gpio0_irqs[4] = { @@ -25,10 +26,37 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; +#ifdef CONFIG_MULTI_IRQ_HANDLER +/* + * Compiling with both non-DT and DT support enabled, will + * break asm irq handler used by non-DT boards. Therefore, + * we provide a C-style irq handler even for non-DT boards, + * if MULTI_IRQ_HANDLER is set. + */ + +asmlinkage void +__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) +{ + u32 stat; + + stat = readl_relaxed(MAIN_IRQ_CAUSE); + stat &= readl_relaxed(MAIN_IRQ_MASK); + if (stat) { + unsigned int hwirq = __fls(stat); + handle_IRQ(hwirq, regs); + return; + } +} +#endif + void __init orion5x_init_irq(void) { orion_irq_init(0, MAIN_IRQ_MASK); +#ifdef CONFIG_MULTI_IRQ_HANDLER + set_handle_irq(orion5x_legacy_handle_irq); +#endif + /* * Initialize gpiolib for GPIOs 0-31. */ diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c deleted file mode 100644 index e105130ba51c..000000000000 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Maxtor Shared Storage II Board Setup - * - * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/pci.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mv643xx_eth.h> -#include <linux/leds.h> -#include <linux/gpio_keys.h> -#include <linux/input.h> -#include <linux/i2c.h> -#include <linux/ata_platform.h> -#include <linux/gpio.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/pci.h> -#include <mach/orion5x.h> -#include <mach/bridge-regs.h> -#include "common.h" -#include "mpp.h" - -#define MSS2_NOR_BOOT_BASE 0xff800000 -#define MSS2_NOR_BOOT_SIZE SZ_256K - -/***************************************************************************** - * Maxtor Shared Storage II Info - ****************************************************************************/ - -/* - * Maxtor Shared Storage II hardware : - * - Marvell 88F5182-A2 C500 - * - Marvell 88E1111 Gigabit Ethernet PHY - * - RTC M41T81 (@0x68) on I2C bus - * - 256KB NOR flash - * - 64MB of RAM - */ - -/***************************************************************************** - * 256KB NOR Flash on BOOT Device - ****************************************************************************/ - -static struct physmap_flash_data mss2_nor_flash_data = { - .width = 1, -}; - -static struct resource mss2_nor_flash_resource = { - .flags = IORESOURCE_MEM, - .start = MSS2_NOR_BOOT_BASE, - .end = MSS2_NOR_BOOT_BASE + MSS2_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device mss2_nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &mss2_nor_flash_data, - }, - .resource = &mss2_nor_flash_resource, - .num_resources = 1, -}; - -/**************************************************************************** - * PCI setup - ****************************************************************************/ -static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int irq; - - /* - * Check for devices with hard-wired IRQs. - */ - irq = orion5x_pci_map_irq(dev, slot, pin); - if (irq != -1) - return irq; - - return -1; -} - -static struct hw_pci mss2_pci __initdata = { - .nr_controllers = 2, - .setup = orion5x_pci_sys_setup, - .scan = orion5x_pci_sys_scan_bus, - .map_irq = mss2_pci_map_irq, -}; - -static int __init mss2_pci_init(void) -{ - if (machine_is_mss2()) - pci_common_init(&mss2_pci); - - return 0; -} -subsys_initcall(mss2_pci_init); - - -/***************************************************************************** - * Ethernet - ****************************************************************************/ - -static struct mv643xx_eth_platform_data mss2_eth_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(8), -}; - -/***************************************************************************** - * SATA - ****************************************************************************/ - -static struct mv_sata_platform_data mss2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO buttons - ****************************************************************************/ - -#define MSS2_GPIO_KEY_RESET 12 -#define MSS2_GPIO_KEY_POWER 11 - -static struct gpio_keys_button mss2_buttons[] = { - { - .code = KEY_POWER, - .gpio = MSS2_GPIO_KEY_POWER, - .desc = "Power", - .active_low = 1, - }, { - .code = KEY_RESTART, - .gpio = MSS2_GPIO_KEY_RESET, - .desc = "Reset", - .active_low = 1, - }, -}; - -static struct gpio_keys_platform_data mss2_button_data = { - .buttons = mss2_buttons, - .nbuttons = ARRAY_SIZE(mss2_buttons), -}; - -static struct platform_device mss2_button_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &mss2_button_data, - }, -}; - -/***************************************************************************** - * RTC m41t81 on I2C bus - ****************************************************************************/ - -#define MSS2_GPIO_RTC_IRQ 3 - -static struct i2c_board_info __initdata mss2_i2c_rtc = { - I2C_BOARD_INFO("m41t81", 0x68), -}; - -/***************************************************************************** - * MSS2 power off method - ****************************************************************************/ -/* - * On the Maxtor Shared Storage II, the shutdown process is the following : - * - Userland modifies U-boot env to tell U-boot to go idle at next boot - * - The board reboots - * - U-boot starts and go into an idle mode until the user press "power" - */ -static void mss2_power_off(void) -{ - u32 reg; - - /* - * Enable and issue soft reset - */ - reg = readl(RSTOUTn_MASK); - reg |= 1 << 2; - writel(reg, RSTOUTn_MASK); - - reg = readl(CPU_SOFT_RESET); - reg |= 1; - writel(reg, CPU_SOFT_RESET); -} - -/**************************************************************************** - * General Setup - ****************************************************************************/ -static unsigned int mss2_mpp_modes[] __initdata = { - MPP0_GPIO, /* Power LED */ - MPP1_GPIO, /* Error LED */ - MPP2_UNUSED, - MPP3_GPIO, /* RTC interrupt */ - MPP4_GPIO, /* HDD ind. (Single/Dual)*/ - MPP5_GPIO, /* HD0 5V control */ - MPP6_GPIO, /* HD0 12V control */ - MPP7_GPIO, /* HD1 5V control */ - MPP8_GPIO, /* HD1 12V control */ - MPP9_UNUSED, - MPP10_GPIO, /* Fan control */ - MPP11_GPIO, /* Power button */ - MPP12_GPIO, /* Reset button */ - MPP13_UNUSED, - MPP14_SATA_LED, /* SATA 0 active */ - MPP15_SATA_LED, /* SATA 1 active */ - MPP16_UNUSED, - MPP17_UNUSED, - MPP18_UNUSED, - MPP19_UNUSED, - 0, -}; - -static void __init mss2_init(void) -{ - /* Setup basic Orion functions. Need to be called early. */ - orion5x_init(); - - orion5x_mpp_conf(mss2_mpp_modes); - - /* - * MPP[20] Unused - * MPP[21] PCI clock - * MPP[22] USB 0 over current - * MPP[23] USB 1 over current - */ - - /* - * Configure peripherals. - */ - orion5x_ehci0_init(); - orion5x_ehci1_init(); - orion5x_eth_init(&mss2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&mss2_sata_data); - orion5x_uart0_init(); - orion5x_xor_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, - ORION_MBUS_DEVBUS_BOOT_ATTR, - MSS2_NOR_BOOT_BASE, - MSS2_NOR_BOOT_SIZE); - platform_device_register(&mss2_nor_flash); - - platform_device_register(&mss2_button_device); - - if (gpio_request(MSS2_GPIO_RTC_IRQ, "rtc") == 0) { - if (gpio_direction_input(MSS2_GPIO_RTC_IRQ) == 0) - mss2_i2c_rtc.irq = gpio_to_irq(MSS2_GPIO_RTC_IRQ); - else - gpio_free(MSS2_GPIO_RTC_IRQ); - } - i2c_register_board_info(0, &mss2_i2c_rtc, 1); - - /* register mss2 specific power-off method */ - pm_power_off = mss2_power_off; -} - -MACHINE_START(MSS2, "Maxtor Shared Storage II") - /* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */ - .atag_offset = 0x100, - .init_machine = mss2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .init_time = orion5x_timer_init, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 6aa22147cace..fd2b99dceb89 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -2,7 +2,9 @@ config ARCH_QCOM bool "Qualcomm Support" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB select ARM_GIC + select ARM_AMBA select CLKSRC_OF + select PINCTRL select QCOM_SCM if SMP help Support for Qualcomm's devicetree based systems. diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h index e2e7c9dbb200..39bca96b555a 100644 --- a/arch/arm/mach-rockchip/core.h +++ b/arch/arm/mach-rockchip/core.h @@ -18,5 +18,3 @@ extern char rockchip_secondary_trampoline_end; extern unsigned long rockchip_boot_fn; extern void rockchip_secondary_startup(void); - -extern struct smp_operations rockchip_smp_ops; diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 072842f6491b..910835d4ccf4 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -178,7 +178,8 @@ static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus) pmu_set_power_domain(0 + i, false); } -struct smp_operations rockchip_smp_ops __initdata = { +static struct smp_operations rockchip_smp_ops __initdata = { .smp_prepare_cpus = rockchip_smp_prepare_cpus, .smp_boot_secondary = rockchip_boot_secondary, }; +CPU_METHOD_OF_DECLARE(rk3066_smp, "rockchip,rk3066-smp", &rockchip_smp_ops); diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index d211d6fa0d98..4499b0a31a27 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -39,7 +39,6 @@ static const char * const rockchip_board_dt_compat[] = { }; DT_MACHINE_START(ROCKCHIP_DT, "Rockchip Cortex-A9 (Device Tree)") - .smp = smp_ops(rockchip_smp_ops), .init_machine = rockchip_dt_init, .dt_compat = rockchip_board_dt_compat, MACHINE_END diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 45a7026e9419..04284de7aca5 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -18,17 +18,7 @@ config PLAT_S3C24XX help Base platform code for any Samsung S3C24XX device -config S3C2410_COMMON_CLK - bool - help - Build the s3c2410 clock driver based on the common clock framework. -config S3C2410_COMMON_DCLK - bool - select REGMAP_MMIO - help - Temporary symbol to build the dclk driver based on the common clock - framework. menu "SAMSUNG S3C24XX SoCs Support" @@ -37,7 +27,6 @@ comment "S3C24XX SoCs" config CPU_S3C2410 bool "SAMSUNG S3C2410" default y - select COMMON_CLK select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA @@ -50,7 +39,6 @@ config CPU_S3C2410 config CPU_S3C2412 bool "SAMSUNG S3C2412" - select COMMON_CLK select CPU_ARM926T select S3C2412_COMMON_CLK select S3C2412_DMA if S3C24XX_DMA @@ -60,7 +48,6 @@ config CPU_S3C2412 config CPU_S3C2416 bool "SAMSUNG S3C2416/S3C2450" - select COMMON_CLK select CPU_ARM926T select S3C2416_PM if PM select S3C2443_COMMON_CLK @@ -70,7 +57,6 @@ config CPU_S3C2416 config CPU_S3C2440 bool "SAMSUNG S3C2440" - select COMMON_CLK select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_PM if PM @@ -80,7 +66,6 @@ config CPU_S3C2440 config CPU_S3C2442 bool "SAMSUNG S3C2442" - select COMMON_CLK select CPU_ARM920T select S3C2410_COMMON_CLK select S3C2410_DMA if S3C24XX_DMA @@ -95,7 +80,6 @@ config CPU_S3C244X config CPU_S3C2443 bool "SAMSUNG S3C2443" - select COMMON_CLK select CPU_ARM920T select S3C2443_COMMON_CLK select S3C2443_DMA if S3C24XX_DMA @@ -236,7 +220,7 @@ config ARCH_BAST bool "Simtec Electronics BAST (EB2410ITX)" select ISA select MACH_BAST_IDE - select S3C2410_COMMON_DCLK if COMMON_CLK + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM @@ -318,7 +302,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select MACH_BAST_IDE - select S3C2410_COMMON_DCLK if COMMON_CLK + select S3C2410_COMMON_DCLK select S3C24XX_SIMTEC_NOR select S3C24XX_SIMTEC_PM if PM select S3C24XX_SIMTEC_USB @@ -337,11 +321,6 @@ config S3C2412_PM_SLEEP if CPU_S3C2412 -config S3C2412_COMMON_CLK - bool - help - Build the s3c2412 clock driver based on the common clock framework. - config CPU_S3C2412_ONLY bool depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \ @@ -502,7 +481,7 @@ comment "S3C2440 Boards" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select HAVE_PATA_PLATFORM - select S3C2410_COMMON_DCLK if COMMON_CLK + select S3C2410_COMMON_DCLK select S3C2440_XTAL_12000000 select S3C24XX_SIMTEC_PM if PM select S3C_DEV_USB_HOST @@ -541,7 +520,7 @@ config MACH_NEXCODER_2440 config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" - select S3C2410_COMMON_DCLK if COMMON_CLK + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_12000000 select S3C24XX_SIMTEC_PM if PM @@ -612,7 +591,7 @@ config MACH_RX1950 bool "HP iPAQ rx1950" select I2C select PM_H1940 if PM - select S3C2410_COMMON_DCLK if COMMON_CLK + select S3C2410_COMMON_DCLK select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ select S3C2440_XTAL_16934400 select S3C24XX_PWM @@ -624,12 +603,6 @@ endif # CPU_S3C2442 if CPU_S3C2443 || CPU_S3C2416 -config S3C2443_COMMON_CLK - bool - help - Temporary symbol to build the clock driver based on the common clock - framework. - config S3C2443_DMA bool help diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 62eaa42cb13a..49d90ca62e87 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -107,6 +107,7 @@ config ARCH_R8A7778 select SH_CLK_CPG select ARM_GIC select SYS_SUPPORTS_SH_TMU + select RENESAS_INTC_IRQPIN config ARCH_R8A7779 bool "R-Car H1 (R8A77790)" @@ -139,16 +140,6 @@ config ARCH_R8A7791 select SYS_SUPPORTS_SH_CMT select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE -config ARCH_EMEV2 - bool "Emma Mobile EV2" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_GIC - select CPU_V7 - select MIGHT_HAVE_PCI - select USE_OF - select AUTO_ZRELADDR - select SYS_SUPPORTS_EM_STI - config ARCH_R7S72100 bool "RZ/A1H (R7S72100)" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -215,7 +206,6 @@ config MACH_BOCKW depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR - select RENESAS_INTC_IRQPIN select SND_SOC_AK4554 if SND_SIMPLE_CARD select SND_SOC_AK4642 if SND_SIMPLE_CARD select USE_OF @@ -224,7 +214,6 @@ config MACH_BOCKW_REFERENCE bool "BOCK-W - Reference Device Tree Implementation" depends on ARCH_R8A7778 select ARCH_REQUIRE_GPIOLIB - select RENESAS_INTC_IRQPIN select REGULATOR_FIXED_VOLTAGE if REGULATOR select USE_OF ---help--- diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 4caffc912a81..9c5cd8c53a85 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -21,8 +21,8 @@ obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o # Clock objects -ifndef CONFIG_COMMON_CLK obj-y += clock.o +ifndef CONFIG_COMMON_CLK obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o @@ -31,7 +31,6 @@ obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o -obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o obj-$(CONFIG_ARCH_R7S72100) += clock-r7s72100.o endif diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c index 57d1a78367b6..57d246eb8813 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c @@ -187,7 +187,7 @@ static const char *eva_boards_compat_dt[] __initdata = { DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva-reference") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = eva_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index a3fd30242bd8..ff33d9c4b658 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -139,7 +139,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_add_standard_devices, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/board-koelsch.c b/arch/arm/mach-shmobile/board-koelsch.c index 5a034ff405d0..3cd8008d09dd 100644 --- a/arch/arm/mach-shmobile/board-koelsch.c +++ b/arch/arm/mach-shmobile/board-koelsch.c @@ -522,7 +522,7 @@ static const char * const koelsch_boards_compat_dt[] __initconst = { DT_MACHINE_START(KOELSCH_DT, "koelsch") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .init_machine = koelsch_init, .init_late = shmobile_init_late, diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c deleted file mode 100644 index 5ac13ba71d54..000000000000 --- a/arch/arm/mach-shmobile/clock-emev2.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * Emma Mobile EV2 clock framework support - * - * Copyright (C) 2012 Magnus Damm - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <linux/sh_clk.h> -#include <linux/clkdev.h> -#include <mach/common.h> - -#define EMEV2_SMU_BASE 0xe0110000 - -/* EMEV2 SMU registers */ -#define USIAU0_RSTCTRL 0x094 -#define USIBU1_RSTCTRL 0x0ac -#define USIBU2_RSTCTRL 0x0b0 -#define USIBU3_RSTCTRL 0x0b4 -#define STI_RSTCTRL 0x124 -#define USIAU0GCLKCTRL 0x4a0 -#define USIBU1GCLKCTRL 0x4b8 -#define USIBU2GCLKCTRL 0x4bc -#define USIBU3GCLKCTRL 0x04c0 -#define STIGCLKCTRL 0x528 -#define USIAU0SCLKDIV 0x61c -#define USIB2SCLKDIV 0x65c -#define USIB3SCLKDIV 0x660 -#define STI_CLKSEL 0x688 - -/* not pretty, but hey */ -static void __iomem *smu_base; - -static void emev2_smu_write(unsigned long value, int offs) -{ - BUG_ON(!smu_base || (offs >= PAGE_SIZE)); - iowrite32(value, smu_base + offs); -} - -static struct clk_mapping smu_mapping = { - .phys = EMEV2_SMU_BASE, - .len = PAGE_SIZE, -}; - -/* Fixed 32 KHz root clock from C32K pin */ -static struct clk c32k_clk = { - .rate = 32768, - .mapping = &smu_mapping, -}; - -/* PLL3 multiplies C32K with 7000 */ -static unsigned long pll3_recalc(struct clk *clk) -{ - return clk->parent->rate * 7000; -} - -static struct sh_clk_ops pll3_clk_ops = { - .recalc = pll3_recalc, -}; - -static struct clk pll3_clk = { - .ops = &pll3_clk_ops, - .parent = &c32k_clk, -}; - -static struct clk *main_clks[] = { - &c32k_clk, - &pll3_clk, -}; - -enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3, - SCLKDIV_NR }; - -#define SCLKDIV(_reg, _shift) \ -{ \ - .parent = &pll3_clk, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = _shift, \ -} - -static struct clk sclkdiv_clks[SCLKDIV_NR] = { - [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0), - [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16), - [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0), - [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0), -}; - -enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK, - GCLK_STI_SCLK, - GCLK_NR }; - -#define GCLK_SCLK(_parent, _reg) \ -{ \ - .parent = _parent, \ - .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ - .enable_bit = 1, /* SCLK_GCC */ \ -} - -static struct clk gclk_clks[GCLK_NR] = { - [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0], - USIAU0GCLKCTRL), - [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1], - USIBU1GCLKCTRL), - [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2], - USIBU2GCLKCTRL), - [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3], - USIBU3GCLKCTRL), - [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL), -}; - -static int emev2_gclk_enable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit), - clk->mapped_reg); - return 0; -} - -static void emev2_gclk_disable(struct clk *clk) -{ - iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit), - clk->mapped_reg); -} - -static struct sh_clk_ops emev2_gclk_clk_ops = { - .enable = emev2_gclk_enable, - .disable = emev2_gclk_disable, - .recalc = followparent_recalc, -}; - -static int __init emev2_gclk_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_gclk_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static unsigned long emev2_sclkdiv_recalc(struct clk *clk) -{ - unsigned int sclk_div; - - sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff; - - return clk->parent->rate / (sclk_div + 1); -} - -static struct sh_clk_ops emev2_sclkdiv_clk_ops = { - .recalc = emev2_sclkdiv_recalc, -}; - -static int __init emev2_sclkdiv_register(struct clk *clks, int nr) -{ - struct clk *clkp; - int ret = 0; - int k; - - for (k = 0; !ret && (k < nr); k++) { - clkp = clks + k; - clkp->ops = &emev2_sclkdiv_clk_ops; - ret |= clk_register(clkp); - } - - return ret; -} - -static struct clk_lookup lookups[] = { - CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("e1020000.uart", &gclk_clks[GCLK_USIAU0_SCLK]), - CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("e1030000.uart", &gclk_clks[GCLK_USIBU1_SCLK]), - CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("e1040000.uart", &gclk_clks[GCLK_USIBU2_SCLK]), - CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("e1050000.uart", &gclk_clks[GCLK_USIBU3_SCLK]), - CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), - CLKDEV_DEV_ID("e0180000.sti", &gclk_clks[GCLK_STI_SCLK]), -}; - -void __init emev2_clock_init(void) -{ - int k, ret = 0; - - smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); - BUG_ON(!smu_base); - - /* setup STI timer to run on 32.768 kHz and deassert reset */ - emev2_smu_write(0, STI_CLKSEL); - emev2_smu_write(1, STI_RSTCTRL); - - /* deassert reset for UART0->UART3 */ - emev2_smu_write(2, USIAU0_RSTCTRL); - emev2_smu_write(2, USIBU1_RSTCTRL); - emev2_smu_write(2, USIBU2_RSTCTRL); - emev2_smu_write(2, USIBU3_RSTCTRL); - - for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) - ret = clk_register(main_clks[k]); - - if (!ret) - ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR); - - if (!ret) - ret = emev2_gclk_register(gclk_clks, GCLK_NR); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - if (!ret) - shmobile_clk_init(); - else - panic("failed to setup emev2 clocks\n"); -} diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index dd989f93498f..433ec674ead1 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -596,7 +596,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), - CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), + CLKDEV_DEV_ID("e9a00000.ethernet", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index 9989b1b06ffd..6609beb9b9b4 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -175,10 +175,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &s1_clk), CLKDEV_CON_ID("shyway_clk", &s_clk), CLKDEV_CON_ID("peripheral_clk", &p_clk), @@ -234,15 +230,15 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("ssi.6", "rcar_sound", &mstp_clks[MSTP309]), CLKDEV_ICK_ID("ssi.7", "rcar_sound", &mstp_clks[MSTP308]), CLKDEV_ICK_ID("ssi.8", "rcar_sound", &mstp_clks[MSTP307]), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP531]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP530]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP529]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP528]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP527]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP526]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP525]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP524]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP523]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP531]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP530]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP529]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP528]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP527]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP526]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP525]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP524]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP523]), }; void __init r8a7778_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 3f93503f5b96..a936ae7de083 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -249,10 +249,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */ [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */ [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -294,10 +294,6 @@ static struct clk mstp_clks[MSTP_NR] = { static struct clk_lookup lookups[] = { /* main clocks */ - CLKDEV_CON_ID("audio_clk_a", &audio_clk_a), - CLKDEV_CON_ID("audio_clk_b", &audio_clk_b), - CLKDEV_CON_ID("audio_clk_c", &audio_clk_c), - CLKDEV_CON_ID("audio_clk_internal", &m2_clk), CLKDEV_CON_ID("extal", &extal_clk), CLKDEV_CON_ID("extal_div2", &extal_div2_clk), CLKDEV_CON_ID("main", &main_clk), @@ -381,16 +377,16 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b), CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c), CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk), - CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]), - CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]), - CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]), - CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]), - CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]), - CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]), - CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]), - CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]), - CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]), - CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]), + CLKDEV_ICK_ID("src.0", "rcar_sound", &mstp_clks[MSTP1031]), + CLKDEV_ICK_ID("src.1", "rcar_sound", &mstp_clks[MSTP1030]), + CLKDEV_ICK_ID("src.2", "rcar_sound", &mstp_clks[MSTP1029]), + CLKDEV_ICK_ID("src.3", "rcar_sound", &mstp_clks[MSTP1028]), + CLKDEV_ICK_ID("src.4", "rcar_sound", &mstp_clks[MSTP1027]), + CLKDEV_ICK_ID("src.5", "rcar_sound", &mstp_clks[MSTP1026]), + CLKDEV_ICK_ID("src.6", "rcar_sound", &mstp_clks[MSTP1025]), + CLKDEV_ICK_ID("src.7", "rcar_sound", &mstp_clks[MSTP1024]), + CLKDEV_ICK_ID("src.8", "rcar_sound", &mstp_clks[MSTP1023]), + CLKDEV_ICK_ID("src.9", "rcar_sound", &mstp_clks[MSTP1022]), CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]), CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]), CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]), diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index 701383fe3267..3b26c7eee873 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -25,6 +25,7 @@ #include <linux/clkdev.h> #include <mach/clock.h> #include <mach/common.h> +#include <mach/rcar-gen2.h> /* * MD EXTAL PLL0 PLL1 PLL3 @@ -43,8 +44,6 @@ * see "p1 / 2" on R8A7791_CLOCK_ROOT() below */ -#define MD(nr) (1 << nr) - #define CPG_BASE 0xe6150000 #define CPG_LEN 0x1000 @@ -68,7 +67,6 @@ #define MSTPSR9 IOMEM(0xe61509a4) #define MSTPSR11 IOMEM(0xe61509ac) -#define MODEMR 0xE6160060 #define SDCKCR 0xE6150074 #define SD1CKCR 0xE6150078 #define SD2CKCR 0xE615026c @@ -190,12 +188,12 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */ [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */ [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */ - [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ - [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ - [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ - [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ - [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ - [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ + [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */ + [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */ + [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */ + [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */ + [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */ + [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */ @@ -295,14 +293,9 @@ static struct clk_lookup lookups[] = { void __init r8a7791_clock_init(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, PAGE_SIZE); - u32 mode; + u32 mode = rcar_gen2_read_mode_pins(); int k, ret = 0; - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); - switch (mode & (MD(14) | MD(13))) { case 0: R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88); diff --git a/arch/arm/mach-shmobile/clock.c b/arch/arm/mach-shmobile/clock.c index ad7df629d995..e7232a0373b9 100644 --- a/arch/arm/mach-shmobile/clock.c +++ b/arch/arm/mach-shmobile/clock.c @@ -21,6 +21,32 @@ */ #include <linux/kernel.h> #include <linux/init.h> + +#ifdef CONFIG_COMMON_CLK +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <mach/clock.h> + +void __init shmobile_clk_workaround(const struct clk_name *clks, + int nr_clks, bool enable) +{ + const struct clk_name *clkn; + struct clk *clk; + unsigned int i; + + for (i = 0; i < nr_clks; ++i) { + clkn = clks + i; + clk = clk_get(NULL, clkn->clk); + if (!IS_ERR(clk)) { + clk_register_clkdev(clk, clkn->con_id, clkn->dev_id); + if (enable) + clk_prepare_enable(clk); + clk_put(clk); + } + } +} + +#else /* CONFIG_COMMON_CLK */ #include <linux/sh_clk.h> #include <linux/export.h> #include <mach/clock.h> @@ -58,3 +84,5 @@ void __clk_put(struct clk *clk) { } EXPORT_SYMBOL(__clk_put); + +#endif /* CONFIG_COMMON_CLK */ diff --git a/arch/arm/mach-shmobile/include/mach/clock.h b/arch/arm/mach-shmobile/include/mach/clock.h index 03e56074928c..9a93cf924b9c 100644 --- a/arch/arm/mach-shmobile/include/mach/clock.h +++ b/arch/arm/mach-shmobile/include/mach/clock.h @@ -1,6 +1,21 @@ #ifndef CLOCK_H #define CLOCK_H +#ifdef CONFIG_COMMON_CLK +/* temporary clock configuration helper for platform devices */ + +struct clk_name { + const char *clk; + const char *con_id; + const char *dev_id; +}; + +void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks, + bool enable); + +#else /* CONFIG_COMMON_CLK */ +/* legacy clock implementation */ + unsigned long shmobile_fixed_ratio_clk_recalc(struct clk *clk); extern struct sh_clk_ops shmobile_fixed_ratio_clk_ops; @@ -36,4 +51,5 @@ do { \ (p)->div = d; \ } while (0) +#endif /* CONFIG_COMMON_CLK */ #endif diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index cb8e32deb2a3..f7a360edcc35 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -4,6 +4,7 @@ extern void shmobile_earlytimer_init(void); extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div); +extern void shmobile_init_delay(void); struct twd_local_timer; extern void shmobile_setup_console(void); extern void shmobile_boot_vector(void); diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h deleted file mode 100644 index fcb142a14e07..000000000000 --- a/arch/arm/mach-shmobile/include/mach/emev2.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __ASM_EMEV2_H__ -#define __ASM_EMEV2_H__ - -extern void emev2_map_io(void); -extern void emev2_init_delay(void); -extern void emev2_clock_init(void); -extern struct smp_operations emev2_smp_ops; - -#endif /* __ASM_EMEV2_H__ */ diff --git a/arch/arm/mach-shmobile/include/mach/r8a7740.h b/arch/arm/mach-shmobile/include/mach/r8a7740.h index d07932f872b6..5e3c9ec06303 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7740.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7740.h @@ -47,7 +47,6 @@ enum { }; extern void r8a7740_meram_workaround(void); -extern void r8a7740_init_delay(void); extern void r8a7740_init_irq_of(void); extern void r8a7740_map_io(void); extern void r8a7740_add_early_devices(void); diff --git a/arch/arm/mach-shmobile/include/mach/r8a7791.h b/arch/arm/mach-shmobile/include/mach/r8a7791.h index 200fa699f730..664274cc4b64 100644 --- a/arch/arm/mach-shmobile/include/mach/r8a7791.h +++ b/arch/arm/mach-shmobile/include/mach/r8a7791.h @@ -5,7 +5,6 @@ void r8a7791_add_standard_devices(void); void r8a7791_add_dt_devices(void); void r8a7791_clock_init(void); void r8a7791_pinmux_init(void); -void r8a7791_init_early(void); extern struct smp_operations r8a7791_smp_ops; #endif /* __ASM_R8A7791_H__ */ diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index 1fc05d9453d0..f710235aff2f 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -99,39 +99,7 @@ static int rmobile_pd_power_up(struct generic_pm_domain *genpd) static bool rmobile_pd_active_wakeup(struct device *dev) { - bool (*active_wakeup)(struct device *dev); - - active_wakeup = dev_gpd_data(dev)->ops.active_wakeup; - return active_wakeup ? active_wakeup(dev) : true; -} - -static int rmobile_pd_stop_dev(struct device *dev) -{ - int (*stop)(struct device *dev); - - stop = dev_gpd_data(dev)->ops.stop; - if (stop) { - int ret = stop(dev); - if (ret) - return ret; - } - return pm_clk_suspend(dev); -} - -static int rmobile_pd_start_dev(struct device *dev) -{ - int (*start)(struct device *dev); - int ret; - - ret = pm_clk_resume(dev); - if (ret) - return ret; - - start = dev_gpd_data(dev)->ops.start; - if (start) - ret = start(dev); - - return ret; + return true; } static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) @@ -140,8 +108,8 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) struct dev_power_governor *gov = rmobile_pd->gov; pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); - genpd->dev_ops.stop = rmobile_pd_stop_dev; - genpd->dev_ops.start = rmobile_pd_start_dev; + genpd->dev_ops.stop = pm_clk_suspend; + genpd->dev_ops.start = pm_clk_resume; genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->dev_irq_safe = true; genpd->power_off = rmobile_pd_power_down; diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c index c71d667007b8..d953ff6e78a2 100644 --- a/arch/arm/mach-shmobile/setup-emev2.c +++ b/arch/arm/mach-shmobile/setup-emev2.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/of_platform.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,23 +37,19 @@ static struct map_desc emev2_io_desc[] __initdata = { #endif }; -void __init emev2_map_io(void) +static void __init emev2_map_io(void) { iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc)); } -void __init emev2_init_delay(void) +static void __init emev2_init_delay(void) { shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ } static void __init emev2_add_standard_devices_dt(void) { -#ifdef CONFIG_COMMON_CLK of_clk_init(NULL); -#else - emev2_clock_init(); -#endif of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -63,6 +58,8 @@ static const char *emev2_boards_compat_dt[] __initconst = { NULL, }; +extern struct smp_operations emev2_smp_ops; + DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)") .smp = smp_ops(emev2_smp_ops), .map_io = emev2_map_io, diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index a177a7b3bdbd..2dfd198fb635 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -876,11 +876,6 @@ void __init r8a7740_add_standard_devices_dt(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } -void __init r8a7740_init_delay(void) -{ - shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */ -}; - void __init r8a7740_init_irq_of(void) { void __iomem *intc_prio_base = ioremap_nocache(0xe6900010, 0x10); @@ -924,9 +919,10 @@ static const char *r8a7740_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)") .map_io = r8a7740_map_io, - .init_early = r8a7740_init_delay, + .init_early = shmobile_init_delay, .init_irq = r8a7740_init_irq_of, .init_machine = r8a7740_generic_init, + .init_late = shmobile_init_late, .dt_compat = r8a7740_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index c4616f0698c6..a901d9ef53f6 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -185,12 +185,6 @@ void __init r8a7790_pinmux_init(void) r8a7790_register_gpio(3); r8a7790_register_gpio(4); r8a7790_register_gpio(5); - r8a7790_register_i2c(0); - r8a7790_register_i2c(1); - r8a7790_register_i2c(2); - r8a7790_register_i2c(3); - r8a7790_register_audio_dmac(0); - r8a7790_register_audio_dmac(1); } #define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \ @@ -308,6 +302,12 @@ void __init r8a7790_add_standard_devices(void) r8a7790_add_dt_devices(); r8a7790_register_irqc(0); r8a7790_register_thermal(); + r8a7790_register_i2c(0); + r8a7790_register_i2c(1); + r8a7790_register_i2c(2); + r8a7790_register_i2c(3); + r8a7790_register_audio_dmac(0); + r8a7790_register_audio_dmac(1); } void __init r8a7790_init_early(void) diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index e28404e43860..949580ae150a 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -210,13 +210,6 @@ void __init r8a7791_add_standard_devices(void) r8a7791_register_thermal(); } -void __init r8a7791_init_early(void) -{ -#ifndef CONFIG_ARM_ARCH_TIMER - shmobile_setup_delay(1300, 2, 4); /* Cortex-A15 @ 1300MHz */ -#endif -} - #ifdef CONFIG_USE_OF static const char *r8a7791_boards_compat_dt[] __initdata = { "renesas,r8a7791", @@ -225,7 +218,7 @@ static const char *r8a7791_boards_compat_dt[] __initdata = { DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") .smp = smp_ops(r8a7791_smp_ops), - .init_early = r8a7791_init_early, + .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, .dt_compat = r8a7791_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 10604480f325..542c5a47173f 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -30,12 +30,16 @@ u32 rcar_gen2_read_mode_pins(void) { - void __iomem *modemr = ioremap_nocache(MODEMR, 4); - u32 mode; - - BUG_ON(!modemr); - mode = ioread32(modemr); - iounmap(modemr); + static u32 mode; + static bool mode_valid; + + if (!mode_valid) { + void __iomem *modemr = ioremap_nocache(MODEMR, 4); + BUG_ON(!modemr); + mode = ioread32(modemr); + iounmap(modemr); + mode_valid = true; + } return mode; } diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f2ca92308f75..2dfd748da7f3 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -24,7 +24,6 @@ #include <linux/io.h> #include <linux/delay.h> #include <mach/common.h> -#include <mach/emev2.h> #include <asm/smp_plat.h> #include <asm/smp_scu.h> diff --git a/arch/arm/mach-shmobile/smp-r8a7791.c b/arch/arm/mach-shmobile/smp-r8a7791.c index 2df5bd190fe4..ec979529f30f 100644 --- a/arch/arm/mach-shmobile/smp-r8a7791.c +++ b/arch/arm/mach-shmobile/smp-r8a7791.c @@ -20,6 +20,7 @@ #include <asm/smp_plat.h> #include <mach/common.h> #include <mach/r8a7791.h> +#include <mach/rcar-gen2.h> #define RST 0xe6160000 #define CA15BAR 0x0020 @@ -51,9 +52,21 @@ static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus) iounmap(p); } +static int r8a7791_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + /* Error out when hardware debug mode is enabled */ + if (rcar_gen2_read_mode_pins() & BIT(21)) { + pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); + return -ENOTSUPP; + } + + return shmobile_smp_apmu_boot_secondary(cpu, idle); +} + struct smp_operations r8a7791_smp_ops __initdata = { .smp_prepare_cpus = r8a7791_smp_prepare_cpus, - .smp_boot_secondary = shmobile_smp_apmu_boot_secondary, + .smp_boot_secondary = r8a7791_smp_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_disable = shmobile_smp_cpu_disable, .cpu_die = shmobile_smp_apmu_cpu_die, diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c index 62d7052d6f21..68bc0b82226d 100644 --- a/arch/arm/mach-shmobile/timer.c +++ b/arch/arm/mach-shmobile/timer.c @@ -21,6 +21,24 @@ #include <linux/platform_device.h> #include <linux/clocksource.h> #include <linux/delay.h> +#include <linux/of_address.h> + +void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz, + unsigned int mult, unsigned int div) +{ + /* calculate a worst-case loops-per-jiffy value + * based on maximum cpu core hz setting and the + * __delay() implementation in arch/arm/lib/delay.S + * + * this will result in a longer delay than expected + * when the cpu core runs on lower frequencies. + */ + + unsigned int value = HZ * div / mult; + + if (!preset_lpj) + preset_lpj = max_cpu_core_hz / value; +} void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, unsigned int mult, unsigned int div) @@ -39,6 +57,33 @@ void __init shmobile_setup_delay(unsigned int max_cpu_core_mhz, preset_lpj = max_cpu_core_mhz * value; } +void __init shmobile_init_delay(void) +{ + struct device_node *np, *parent; + u32 max_freq, freq; + + max_freq = 0; + + parent = of_find_node_by_path("/cpus"); + if (parent) { + for_each_child_of_node(parent, np) { + if (!of_property_read_u32(np, "clock-frequency", &freq)) + max_freq = max(max_freq, freq); + } + of_node_put(parent); + } + + if (max_freq) { + if (of_find_compatible_node(NULL, NULL, "arm,cortex-a8")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9")) + shmobile_setup_delay_hz(max_freq, 1, 3); + else if (of_find_compatible_node(NULL, NULL, "arm,cortex-a15")) + if (!IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) + shmobile_setup_delay_hz(max_freq, 2, 4); + } +} + static void __init shmobile_late_time_init(void) { /* diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index 1217fb598cfd..df731f2322fa 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -36,6 +36,7 @@ static void __init stih41x_machine_init(void) static const char *stih41x_dt_match[] __initdata = { "st,stih415", "st,stih416", + "st,stih407", NULL }; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index b57d7d53b9d3..0fbd4f156bfa 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,14 +1,38 @@ -config ARCH_SUNXI - bool "Allwinner A1X SOCs" if ARCH_MULTI_V7 - select ARCH_HAS_RESET_CONTROLLER +menuconfig ARCH_SUNXI + bool "Allwinner SoCs" if ARCH_MULTI_V7 select ARCH_REQUIRE_GPIOLIB - select ARM_GIC - select ARM_PSCI select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_ARM_ARCH_TIMER select PINCTRL select PINCTRL_SUNXI - select RESET_CONTROLLER select SUN4I_TIMER + +if ARCH_SUNXI + +config MACH_SUN4I + bool "Allwinner A10 (sun4i) SoCs support" + default ARCH_SUNXI + +config MACH_SUN5I + bool "Allwinner A10s / A13 (sun5i) SoCs support" + default ARCH_SUNXI + select SUN5I_HSTIMER + +config MACH_SUN6I + bool "Allwinner A31 (sun6i) SoCs support" + default ARCH_SUNXI + select ARCH_HAS_RESET_CONTROLLER + select ARM_GIC + select MFD_SUN6I_PRCM + select RESET_CONTROLLER + select SUN5I_HSTIMER + +config MACH_SUN7I + bool "Allwinner A20 (sun7i) SoCs support" + default ARCH_SUNXI + select ARM_GIC + select ARM_PSCI + select HAVE_ARM_ARCH_TIMER select SUN5I_HSTIMER + +endif diff --git a/arch/arm/mach-sunxi/common.h b/arch/arm/mach-sunxi/common.h deleted file mode 100644 index 9e5ac4756cbb..000000000000 --- a/arch/arm/mach-sunxi/common.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Core functions for Allwinner SoCs - * - * Copyright (C) 2013 Maxime Ripard - * - * Maxime Ripard <maxime.ripard@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_SUNXI_COMMON_H_ -#define __ARCH_SUNXI_COMMON_H_ - -void sun6i_secondary_startup(void); -extern struct smp_operations sun6i_smp_ops; - -#endif /* __ARCH_SUNXI_COMMON_H_ */ diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 0c7dbce033cc..c53077bb8c3f 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -21,8 +21,6 @@ #include <linux/of_address.h> #include <linux/smp.h> -#include "common.h" - #define CPUCFG_CPU_PWR_CLAMP_STATUS_REG(cpu) ((cpu) * 0x40 + 0x64) #define CPUCFG_CPU_RST_CTRL_REG(cpu) (((cpu) + 1) * 0x40) #define CPUCFG_CPU_CTRL_REG(cpu) (((cpu) + 1) * 0x40 + 0x04) @@ -122,3 +120,4 @@ struct smp_operations sun6i_smp_ops __initdata = { .smp_prepare_cpus = sun6i_smp_prepare_cpus, .smp_boot_secondary = sun6i_smp_boot_secondary, }; +CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 460b5a4962ef..3f9587bb51f6 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -12,111 +12,8 @@ #include <linux/clk-provider.h> #include <linux/clocksource.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/of_platform.h> -#include <linux/io.h> -#include <linux/reboot.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/system_misc.h> - -#include "common.h" - -#define SUN4I_WATCHDOG_CTRL_REG 0x00 -#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0) -#define SUN4I_WATCHDOG_MODE_REG 0x04 -#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0) -#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1) - -#define SUN6I_WATCHDOG1_IRQ_REG 0x00 -#define SUN6I_WATCHDOG1_CTRL_REG 0x10 -#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_REG 0x14 -#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0) -#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1) -#define SUN6I_WATCHDOG1_MODE_REG 0x18 -#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0) - -static void __iomem *wdt_base; - -static void sun4i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Enable timer and set reset bit in the watchdog */ - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - - /* - * Restart the watchdog. The default (and lowest) interval - * value for the watchdog is 0.5s. - */ - writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE, - wdt_base + SUN4I_WATCHDOG_MODE_REG); - } -} - -static void sun6i_restart(enum reboot_mode mode, const char *cmd) -{ - if (!wdt_base) - return; - - /* Disable interrupts */ - writel(0, wdt_base + SUN6I_WATCHDOG1_IRQ_REG); - - /* We want to disable the IRQ and just reset the whole system */ - writel(SUN6I_WATCHDOG1_CONFIG_RESTART, - wdt_base + SUN6I_WATCHDOG1_CONFIG_REG); - - /* Enable timer. The default and lowest interval value is 0.5s */ - writel(SUN6I_WATCHDOG1_MODE_ENABLE, - wdt_base + SUN6I_WATCHDOG1_MODE_REG); - - /* Restart the watchdog. */ - writel(SUN6I_WATCHDOG1_CTRL_RESTART, - wdt_base + SUN6I_WATCHDOG1_CTRL_REG); - - while (1) { - mdelay(5); - writel(SUN6I_WATCHDOG1_MODE_ENABLE, - wdt_base + SUN6I_WATCHDOG1_MODE_REG); - } -} - -static struct of_device_id sunxi_restart_ids[] = { - { .compatible = "allwinner,sun4i-a10-wdt" }, - { .compatible = "allwinner,sun6i-a31-wdt" }, - { /*sentinel*/ } -}; - -static void sunxi_setup_restart(void) -{ - struct device_node *np; - - np = of_find_matching_node(NULL, sunxi_restart_ids); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_base = of_iomap(np, 0); - WARN(!wdt_base, "failed to map watchdog base address"); -} - -static void __init sunxi_dt_init(void) -{ - sunxi_setup_restart(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); -} static const char * const sunxi_board_dt_compat[] = { "allwinner,sun4i-a10", @@ -126,9 +23,7 @@ static const char * const sunxi_board_dt_compat[] = { }; DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") - .init_machine = sunxi_dt_init, .dt_compat = sunxi_board_dt_compat, - .restart = sun4i_restart, MACHINE_END static const char * const sun6i_board_dt_compat[] = { @@ -140,16 +35,14 @@ extern void __init sun6i_reset_init(void); static void __init sun6i_timer_init(void) { of_clk_init(NULL); - sun6i_reset_init(); + if (IS_ENABLED(CONFIG_RESET_CONTROLLER)) + sun6i_reset_init(); clocksource_of_init(); } DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family") - .init_machine = sunxi_dt_init, .init_time = sun6i_timer_init, .dt_compat = sun6i_board_dt_compat, - .restart = sun6i_restart, - .smp = smp_ops(sun6i_smp_ops), MACHINE_END static const char * const sun7i_board_dt_compat[] = { @@ -158,7 +51,5 @@ static const char * const sun7i_board_dt_compat[] = { }; DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") - .init_machine = sunxi_dt_init, .dt_compat = sun7i_board_dt_compat, - .restart = sun4i_restart, MACHINE_END diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c index fb7920201ab4..7c7123e7557b 100644 --- a/arch/arm/mach-tegra/pmc.c +++ b/arch/arm/mach-tegra/pmc.c @@ -41,6 +41,14 @@ #define PMC_REMOVE_CLAMPING 0x34 #define PMC_PWRGATE_STATUS 0x38 +#define PMC_SCRATCH0 0x50 +#define PMC_SCRATCH0_MODE_RECOVERY (1 << 31) +#define PMC_SCRATCH0_MODE_BOOTLOADER (1 << 30) +#define PMC_SCRATCH0_MODE_RCM (1 << 1) +#define PMC_SCRATCH0_MODE_MASK (PMC_SCRATCH0_MODE_RECOVERY | \ + PMC_SCRATCH0_MODE_BOOTLOADER | \ + PMC_SCRATCH0_MODE_RCM) + #define PMC_CPUPWRGOOD_TIMER 0xc8 #define PMC_CPUPWROFF_TIMER 0xcc @@ -165,6 +173,22 @@ void tegra_pmc_restart(enum reboot_mode mode, const char *cmd) { u32 val; + val = tegra_pmc_readl(PMC_SCRATCH0); + val &= ~PMC_SCRATCH0_MODE_MASK; + + if (cmd) { + if (strcmp(cmd, "recovery") == 0) + val |= PMC_SCRATCH0_MODE_RECOVERY; + + if (strcmp(cmd, "bootloader") == 0) + val |= PMC_SCRATCH0_MODE_BOOTLOADER; + + if (strcmp(cmd, "forced-recovery") == 0) + val |= PMC_SCRATCH0_MODE_RCM; + } + + tegra_pmc_writel(val, PMC_SCRATCH0); + val = tegra_pmc_readl(0); val |= 0x10; tegra_pmc_writel(val, 0); diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig index 58c2b844e0a3..573e0db1d0f0 100644 --- a/arch/arm/mach-zynq/Kconfig +++ b/arch/arm/mach-zynq/Kconfig @@ -1,14 +1,16 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7 - select ARM_AMBA - select ARM_GIC select ARCH_HAS_CPUFREQ select ARCH_HAS_OPP + select ARCH_SUPPORTS_BIG_ENDIAN + select ARM_AMBA + select ARM_GIC + select ARM_GLOBAL_TIMER if !CPU_FREQ + select CADENCE_TTC_TIMER select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select ICST - select CADENCE_TTC_TIMER - select ARM_GLOBAL_TIMER if !CPU_FREQ select MFD_SYSCON + select SOC_BUS help Support for Xilinx Zynq ARM Cortex A9 Platform diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 6fcc584c1a11..edbd9d83f407 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -29,6 +29,8 @@ #include <linux/memblock.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -37,10 +39,15 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/smp_scu.h> +#include <asm/system_info.h> #include <asm/hardware/cache-l2x0.h> #include "common.h" +#define ZYNQ_DEVCFG_MCTRL 0x80 +#define ZYNQ_DEVCFG_PS_VERSION_SHIFT 28 +#define ZYNQ_DEVCFG_PS_VERSION_MASK 0xF + void __iomem *zynq_scu_base; /** @@ -60,19 +67,81 @@ static struct platform_device zynq_cpuidle_device = { }; /** + * zynq_get_revision - Get Zynq silicon revision + * + * Return: Silicon version or -1 otherwise + */ +static int __init zynq_get_revision(void) +{ + struct device_node *np; + void __iomem *zynq_devcfg_base; + u32 revision; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-devcfg-1.0"); + if (!np) { + pr_err("%s: no devcfg node found\n", __func__); + return -1; + } + + zynq_devcfg_base = of_iomap(np, 0); + if (!zynq_devcfg_base) { + pr_err("%s: Unable to map I/O memory\n", __func__); + return -1; + } + + revision = readl(zynq_devcfg_base + ZYNQ_DEVCFG_MCTRL); + revision >>= ZYNQ_DEVCFG_PS_VERSION_SHIFT; + revision &= ZYNQ_DEVCFG_PS_VERSION_MASK; + + iounmap(zynq_devcfg_base); + + return revision; +} + +/** * zynq_init_machine - System specific initialization, intended to be * called from board specific initialization. */ static void __init zynq_init_machine(void) { struct platform_device_info devinfo = { .name = "cpufreq-cpu0", }; + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct device *parent = NULL; /* * 64KB way size, 8-way associativity, parity disabled */ l2x0_of_init(0x02060000, 0xF0F0FFFF); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + goto out; + + system_rev = zynq_get_revision(); + + soc_dev_attr->family = kasprintf(GFP_KERNEL, "Xilinx Zynq"); + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", + zynq_slcr_get_device_id()); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + kfree(soc_dev_attr->family); + kfree(soc_dev_attr->revision); + kfree(soc_dev_attr->soc_id); + kfree(soc_dev_attr); + goto out; + } + + parent = soc_device_to_device(soc_dev); + +out: + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); platform_device_register(&zynq_cpuidle_device); platform_device_register_full(&devinfo); diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index b097844d3175..f652f0a884a6 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -24,6 +24,7 @@ extern int zynq_early_slcr_init(void); extern void zynq_slcr_system_reset(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); +extern u32 zynq_slcr_get_device_id(void); #ifdef CONFIG_SMP extern void secondary_startup(void); diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index 57a32869f0aa..dd8c071941e7 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -8,9 +8,12 @@ */ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> ENTRY(zynq_secondary_trampoline) - ldr r0, [pc] +ARM_BE8(setend be) @ ensure we are in BE8 mode + ldr r0, zynq_secondary_trampoline_jump +ARM_BE8(rev r0, r0) bx r0 .globl zynq_secondary_trampoline_jump zynq_secondary_trampoline_jump: diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index a37d49a6e657..c43a2d16e223 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -26,10 +26,13 @@ #define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */ #define SLCR_A9_CPU_RST_CTRL_OFFSET 0x244 /* CPU Software Reset Control */ #define SLCR_REBOOT_STATUS_OFFSET 0x258 /* PS Reboot Status */ +#define SLCR_PSS_IDCODE 0x530 /* PS IDCODE */ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_A9_CPU_CLKSTOP 0x10 #define SLCR_A9_CPU_RST 0x1 +#define SLCR_PSS_IDCODE_DEVICE_SHIFT 12 +#define SLCR_PSS_IDCODE_DEVICE_MASK 0x1F static void __iomem *zynq_slcr_base; static struct regmap *zynq_slcr_regmap; @@ -83,6 +86,22 @@ static inline int zynq_slcr_unlock(void) } /** + * zynq_slcr_get_device_id - Read device code id + * + * Return: Device code id + */ +u32 zynq_slcr_get_device_id(void) +{ + u32 val; + + zynq_slcr_read(&val, SLCR_PSS_IDCODE); + val >>= SLCR_PSS_IDCODE_DEVICE_SHIFT; + val &= SLCR_PSS_IDCODE_DEVICE_MASK; + + return val; +} + +/** * zynq_slcr_system_reset - Reset the entire system. */ void zynq_slcr_system_reset(void) diff --git a/arch/arm/plat-orion/gpio.c b/arch/arm/plat-orion/gpio.c index 6816192a7561..b61a3bcc2fa8 100644 --- a/arch/arm/plat-orion/gpio.c +++ b/arch/arm/plat-orion/gpio.c @@ -597,51 +597,3 @@ void __init orion_gpio_init(struct device_node *np, orion_gpio_chip_count++; } - -#ifdef CONFIG_OF -static void __init orion_gpio_of_init_one(struct device_node *np, - int irq_gpio_base) -{ - int ngpio, gpio_base, mask_offset; - void __iomem *base; - int ret, i; - int irqs[4]; - int secondary_irq_base; - - ret = of_property_read_u32(np, "ngpio", &ngpio); - if (ret) - goto out; - ret = of_property_read_u32(np, "mask-offset", &mask_offset); - if (ret == -EINVAL) - mask_offset = 0; - else - goto out; - base = of_iomap(np, 0); - if (!base) - goto out; - - secondary_irq_base = irq_gpio_base + (32 * orion_gpio_chip_count); - gpio_base = 32 * orion_gpio_chip_count; - - /* Get the interrupt numbers. Each chip can have up to 4 - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - - for (i = 0; i < 4; i++) - irqs[i] = irq_of_parse_and_map(np, i); - - orion_gpio_init(np, gpio_base, ngpio, base, mask_offset, - secondary_irq_base, irqs); - return; -out: - pr_err("%s: %s: missing mandatory property\n", __func__, np->name); -} - -void __init orion_gpio_of_init(int irq_gpio_base) -{ - struct device_node *np; - - for_each_compatible_node(np, NULL, "marvell,orion-gpio") - orion_gpio_of_init_one(np, irq_gpio_base); -} -#endif diff --git a/arch/arm/plat-orion/include/plat/irq.h b/arch/arm/plat-orion/include/plat/irq.h index 50547e417936..96be19e9bd93 100644 --- a/arch/arm/plat-orion/include/plat/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -12,5 +12,4 @@ #define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); -void __init orion_dt_init_irq(void); #endif diff --git a/arch/arm/plat-orion/include/plat/orion-gpio.h b/arch/arm/plat-orion/include/plat/orion-gpio.h index 614dcac9dc52..e763988b04b9 100644 --- a/arch/arm/plat-orion/include/plat/orion-gpio.h +++ b/arch/arm/plat-orion/include/plat/orion-gpio.h @@ -33,5 +33,4 @@ void __init orion_gpio_init(struct device_node *np, int secondary_irq_base, int irq[4]); -void __init orion_gpio_of_init(int irq_gpio_base); #endif diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 807df142444b..8c1fc06007c0 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -20,47 +20,6 @@ #include <plat/orion-gpio.h> #include <mach/bridge-regs.h> -#ifdef CONFIG_MULTI_IRQ_HANDLER -/* - * Compiling with both non-DT and DT support enabled, will - * break asm irq handler used by non-DT boards. Therefore, - * we provide a C-style irq handler even for non-DT boards, - * if MULTI_IRQ_HANDLER is set. - * - * Notes: - * - this is prepared for Kirkwood and Dove only, update - * accordingly if you add Orion5x or MV78x00. - * - Orion5x uses different macro names and has only one - * set of CAUSE/MASK registers. - * - MV78x00 uses the same macro names but has a third - * set of CAUSE/MASK registers. - * - */ - -static void __iomem *orion_irq_base = IRQ_VIRT_BASE; - -asmlinkage void -__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs) -{ - u32 stat; - - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF); - if (stat) { - unsigned int hwirq = __fls(stat); - handle_IRQ(hwirq, regs); - return; - } - stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF); - stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF); - if (stat) { - unsigned int hwirq = 32 + __fls(stat); - handle_IRQ(hwirq, regs); - return; - } -} -#endif - void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) { struct irq_chip_generic *gc; @@ -78,40 +37,4 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) ct->chip.irq_unmask = irq_gc_mask_set_bit; irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); - -#ifdef CONFIG_MULTI_IRQ_HANDLER - set_handle_irq(orion_legacy_handle_irq); -#endif -} - -#ifdef CONFIG_OF -static int __init orion_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - int i = 0; - void __iomem *base; - - do { - base = of_iomap(np, i); - if (base) { - orion_irq_init(i * 32, base + 0x04); - i++; - } - } while (base); - - irq_domain_add_legacy(np, i * 32, 0, 0, - &irq_domain_simple_ops, NULL); - return 0; -} - -static const struct of_device_id orion_irq_match[] = { - { .compatible = "marvell,orion-intc", - .data = orion_add_irq_domain, }, - {}, -}; - -void __init orion_dt_init_irq(void) -{ - of_irq_init(orion_irq_match); } -#endif diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 25c826ed3b65..5e5beaa9ae15 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -4,6 +4,9 @@ # # Licensed under GPLv2 +ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include +ccflags-$(CONFIG_ARCH_EXYNOS) += -I$(srctree)/arch/arm/mach-exynos/include + obj-y := obj-m := obj-n := dummy.o |