diff options
Diffstat (limited to 'arch')
59 files changed, 1822 insertions, 342 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dae718ab1d66..c941fd06b2af 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1583,6 +1583,7 @@ config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 355 if ARCH_U8500 + default 264 if MACH_H4700 default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts new file mode 100644 index 000000000000..8a5dff807b45 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Globalscale Technologies Dreamplug"; + compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + serial@f1012000 { + compatible = "ns16550a"; + reg = <0xf1012000 0xff>; + reg-shift = <2>; + interrupts = <33>; + clock-frequency = <200000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi new file mode 100644 index 000000000000..771c6bbeb29a --- /dev/null +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -0,0 +1,6 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,kirkwood"; +}; + diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts index 825d2957da0b..61f385809970 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra-paz00.dts @@ -35,6 +35,11 @@ i2c@7000d000 { clock-frequency = <400000>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; }; serial@70006000 { @@ -74,4 +79,25 @@ sdhci@c8000600 { support-8bit; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio 79 1>; /* gpio PJ7, active low */ + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "wifi-led"; + gpios = <&gpio 24 0>; + linux,default-trigger = "rfkill0"; + }; + }; }; diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index fd5d3041d717..351d6708c3ae 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -11,11 +11,14 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_DEV_INITRD=y # CONFIG_ELF_CORE is not set CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y @@ -27,18 +30,20 @@ CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y CONFIG_MACH_WARIO=y CONFIG_MACH_VENTANA=y -CONFIG_TEGRA_DEBUG_UARTD=y -CONFIG_ARM_ERRATA_742230=y +CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y -CONFIG_NR_CPUS=2 CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_AUTO_ZRELADDR=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +CONFIG_CPU_IDLE=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -68,7 +73,6 @@ CONFIG_IPV6_MULTIPLE_TABLES=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y -CONFIG_MISC_DEVICES=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y CONFIG_ICS932S401=y @@ -76,6 +80,7 @@ CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y @@ -85,8 +90,7 @@ CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y # CONFIG_WLAN is not set -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set +CONFIG_INPUT_EVDEV=y # CONFIG_VT is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_DEVKMEM is not set @@ -96,13 +100,15 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set -# CONFIG_I2C_HELPER_AUTO is not set CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_VIRTUAL_CONSUMER=y +CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_TPS6586X=y CONFIG_SOUND=y CONFIG_SND=y @@ -116,11 +122,13 @@ CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y +CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y CONFIG_USB_STORAGE=y CONFIG_MMC=y +CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y @@ -130,6 +138,11 @@ CONFIG_STAGING=y CONFIG_IIO=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_AK8975=y +CONFIG_MFD_NVEC=y +CONFIG_KEYBOARD_NVEC=y +CONFIG_SERIO_NVEC_PS2=y +CONFIG_TEGRA_IOMMU_GART=y +CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -138,13 +151,12 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_EFI_PARTITION=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y @@ -162,9 +174,8 @@ CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CRC_CCITT=y -CONFIG_CRC16=y diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index dfad6538b273..98997c2da262 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -179,7 +179,9 @@ config MACH_SMDKV310 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI @@ -225,7 +227,9 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 @@ -262,11 +266,14 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S3C_DEV_I2C6 select S5P_DEV_CSIS0 + select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_G2D select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY @@ -276,6 +283,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select S5P_SETUP_MIPIPHY @@ -296,7 +304,9 @@ config MACH_ORIGEN select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index aa37179d776c..191f5c675fe1 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -28,6 +28,7 @@ #include <video/platform_lcd.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include <media/s5p_fimc.h> #include <media/v4l2-mediabus.h> @@ -75,6 +76,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MAX8903, FIXED_REG_ID_CAM_A28V, FIXED_REG_ID_CAM_12V, + FIXED_REG_ID_CAM_VT_15V, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -399,6 +401,9 @@ static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ }; +static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */ +}; static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ }; @@ -431,7 +436,7 @@ static struct regulator_consumer_supply __initdata max8997_buck1_[] = { REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck2_[] = { - REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ + REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */ }; static struct regulator_consumer_supply __initdata max8997_buck3_[] = { REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ @@ -546,6 +551,8 @@ static struct regulator_init_data __initdata max8997_ldo6_data = { .enabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer), + .consumer_supplies = nuri_max8997_ldo6_consumer, }; static struct regulator_init_data __initdata max8997_ldo7_data = { @@ -742,7 +749,7 @@ static struct regulator_init_data __initdata max8997_buck2_data = { .constraints = { .name = "VINT_1.1V_C210", .min_uV = 900000, - .max_uV = 1100000, + .max_uV = 1200000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .state_mem = { @@ -957,7 +964,6 @@ static struct max8997_platform_data __initdata nuri_max8997_pdata = { .regulators = nuri_max8997_regulators, .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, - .buck2_gpiodvs = true, .buck1_voltage[0] = 1350000, /* 1.35V */ .buck1_voltage[1] = 1300000, /* 1.3V */ @@ -1116,7 +1122,30 @@ static void __init nuri_ehci_init(void) } /* CAMERA */ +static struct regulator_consumer_supply cam_vt_cam15_supply = + REGULATOR_SUPPLY("vdd_core", "6-003c"); + +static struct regulator_init_data cam_vt_cam15_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_cam15_supply, +}; + +static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = { + .supply_name = "VT_CAM_1.5V", + .microvolts = 1500000, + .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */ + .enable_high = 1, + .init_data = &cam_vt_cam15_reg_init_data, +}; + +static struct platform_device cam_vt_cam15_fixed_rdev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V, + .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_vdda_supply[] = { + REGULATOR_SUPPLY("vdda", "6-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -1173,6 +1202,21 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */ #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5) +#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0) +#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1) + +static struct s5k6aa_platform_data s5k6aa_pldata = { + .mclk_frequency = 24000000UL, + .gpio_reset = { GPIO_CAM_VT_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3c), + .platform_data = &s5k6aa_pldata, +}; static struct m5mols_platform_data m5mols_platdata = { .gpio_reset = GPIO_CAM_MEGA_RST, @@ -1185,6 +1229,13 @@ static struct i2c_board_info m5mols_board_info = { static struct s5p_fimc_isp_info nuri_camera_sensors[] = { { + .flags = V4L2_MBUS_PCLK_SAMPLE_RISING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .clk_frequency = 24000000UL, + .i2c_bus_num = 6, + }, { .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, @@ -1200,11 +1251,13 @@ static struct s5p_platform_fimc fimc_md_platdata = { }; static struct gpio nuri_camera_gpios[] = { + { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, + { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, }; -static void nuri_camera_init(void) +static void __init nuri_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -1224,6 +1277,8 @@ static void nuri_camera_init(void) pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__); /* Free GPIOs controlled directly by the sensor drivers. */ + gpio_free(GPIO_CAM_VT_NRST); + gpio_free(GPIO_CAM_VT_NSTBY); gpio_free(GPIO_CAM_MEGA_RST); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) { @@ -1234,15 +1289,27 @@ static void nuri_camera_init(void) s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4); } +static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = { + .frequency = 400000U, + .sda_delay = 200, + .bus_num = 6, +}; + static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = { .frequency = 400000U, .sda_delay = 200, }; +/* DEVFREQ controlling memory/bus */ +static struct platform_device exynos4_bus_devfreq = { + .name = "exynos4210-busfreq", +}; + static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &s3c_device_i2c0, + &s3c_device_i2c6, &emmc_fixed_voltage, &s5p_device_mipi_csis0, &s5p_device_fimc0, @@ -1259,6 +1326,8 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_i2c3, &i2c9_gpio, &s3c_device_adc, + &s5p_device_g2d, + &s5p_device_jpeg, &s3c_device_rtc, &s5p_device_mfc, &s5p_device_mfc_l, @@ -1271,8 +1340,10 @@ static struct platform_device *nuri_devices[] __initdata = { &nuri_backlight_device, &max8903_fixed_reg_dev, &nuri_max8903_device, + &cam_vt_cam15_fixed_rdev, &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, + &exynos4_bus_devfreq, }; static void __init nuri_map_io(void) @@ -1302,6 +1373,7 @@ static void __init nuri_machine_init(void) i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s3c_i2c6_set_platdata(&nuri_i2c6_platdata); s5p_fimd0_set_platdata(&nuri_fb_pdata); diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index b4d032d5c878..878d4c99142d 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/mfd/max8997.h> #include <linux/lcd.h> +#include <linux/rfkill-gpio.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -235,6 +236,7 @@ static struct regulator_init_data __initdata max8997_ldo9_data = { .min_uV = 2800000, .max_uV = 2800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -278,6 +280,7 @@ static struct regulator_init_data __initdata max8997_ldo14_data = { .min_uV = 1800000, .max_uV = 1800000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -293,6 +296,7 @@ static struct regulator_init_data __initdata max8997_ldo17_data = { .min_uV = 3300000, .max_uV = 3300000, .apply_uV = 1, + .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_STATUS, .state_mem = { .disabled = 1, @@ -602,6 +606,23 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +/* Bluetooth rfkill gpio platform data */ +struct rfkill_gpio_platform_data origen_bt_pdata = { + .reset_gpio = EXYNOS4_GPX2(2), + .shutdown_gpio = -1, + .type = RFKILL_TYPE_BLUETOOTH, + .name = "origen-bt", +}; + +/* Bluetooth Platform device */ +static struct platform_device origen_device_bluetooth = { + .name = "rfkill_gpio", + .id = -1, + .dev = { + .platform_data = &origen_bt_pdata, + }, +}; + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc0, @@ -613,9 +634,12 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, &s5p_device_fimd0, + &s5p_device_g2d, &s5p_device_hdmi, &s5p_device_i2c_hdmiphy, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, @@ -623,6 +647,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_device_bluetooth, }; /* LCD Backlight data */ @@ -636,6 +661,16 @@ static struct platform_pwm_backlight_data origen_bl_data = { .pwm_period_ns = 1000, }; +static void __init origen_bt_setup(void) +{ + gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART"); + /* 4 UART Pins configuration */ + s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2)); + /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */ + s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT); + s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); +} + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -689,6 +724,8 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); + + origen_bt_setup(); } MACHINE_START(ORIGEN, "ORIGEN") diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 5258b8563676..83b91fa777c1 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -270,6 +270,9 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_fimc_md, + &s5p_device_g2d, + &s5p_device_jpeg, &exynos4_device_ac97, &exynos4_device_i2s0, &exynos4_device_ohci, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 4850700798d0..0b944eb66ebd 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -47,6 +47,7 @@ #include <media/v4l2-mediabus.h> #include <media/s5p_fimc.h> #include <media/m5mols.h> +#include <media/s5k6aa.h> #include "common.h" @@ -123,8 +124,10 @@ static struct regulator_consumer_supply lp3974_buck1_consumer = static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); -static struct regulator_consumer_supply lp3974_buck3_consumer = - REGULATOR_SUPPLY("vdet", "s5p-sdo"); +static struct regulator_consumer_supply lp3974_buck3_consumer[] = { + REGULATOR_SUPPLY("vdet", "s5p-sdo"), + REGULATOR_SUPPLY("vdd_reg", "0-003c"), +}; static struct regulator_init_data lp3974_buck1_data = { .constraints = { @@ -169,8 +172,8 @@ static struct regulator_init_data lp3974_buck3_data = { .enabled = 1, }, }, - .num_consumer_supplies = 1, - .consumer_supplies = &lp3974_buck3_consumer, + .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer), + .consumer_supplies = lp3974_buck3_consumer, }; static struct regulator_init_data lp3974_buck4_data = { @@ -303,6 +306,9 @@ static struct regulator_init_data lp3974_ldo8_data = { .consumer_supplies = lp3974_ldo8_consumer, }; +static struct regulator_consumer_supply lp3974_ldo9_consumer = + REGULATOR_SUPPLY("vddio", "0-003c"); + static struct regulator_init_data lp3974_ldo9_data = { .constraints = { .name = "VCC_2.8V", @@ -314,6 +320,8 @@ static struct regulator_init_data lp3974_ldo9_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo9_consumer, }; static struct regulator_init_data lp3974_ldo10_data = { @@ -412,6 +420,7 @@ static struct regulator_init_data lp3974_ldo15_data = { }; static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { + REGULATOR_SUPPLY("vdda", "0-003c"), REGULATOR_SUPPLY("a_sensor", "0-001f"), }; @@ -819,6 +828,8 @@ static struct s3c_fb_pd_win universal_fb_win0 = { }, .max_bpp = 32, .default_bpp = 16, + .virtual_x = 480, + .virtual_y = 2 * 800, }; static struct s3c_fb_platdata universal_lcd_pdata __initdata = { @@ -830,6 +841,28 @@ static struct s3c_fb_platdata universal_lcd_pdata __initdata = { .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, }; +static struct regulator_consumer_supply cam_vt_dio_supply = + REGULATOR_SUPPLY("vdd_core", "0-003c"); + +static struct regulator_init_data cam_vt_dio_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_vt_dio_supply, +}; + +static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = { + .supply_name = "CAM_VT_D_IO", + .microvolts = 2800000, + .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */ + .enable_high = 1, + .init_data = &cam_vt_dio_reg_init_data, +}; + +static struct platform_device cam_vt_dio_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO, + .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg }, +}; + static struct regulator_consumer_supply cam_i_core_supply = REGULATOR_SUPPLY("core", "0-001f"); @@ -885,6 +918,28 @@ static struct s5p_platform_mipi_csis mipi_csis_platdata = { #define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) #define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ #define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) +#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7) +#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6) + +static int s5k6aa_set_power(int on) +{ + gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); + return 0; +} + +static struct s5k6aa_platform_data s5k6aa_platdata = { + .mclk_frequency = 21600000UL, + .gpio_reset = { GPIO_CAM_VGA_NRST, 0 }, + .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 }, + .bus_type = V4L2_MBUS_PARALLEL, + .horiz_flip = 1, + .set_power = s5k6aa_set_power, +}; + +static struct i2c_board_info s5k6aa_board_info = { + I2C_BOARD_INFO("S5K6AA", 0x3C), + .platform_data = &s5k6aa_platdata, +}; static int m5mols_set_power(struct device *dev, int on) { @@ -909,6 +964,14 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = { .mux_id = 0, .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &s5k6aa_board_info, + .i2c_bus_num = 0, + .clk_frequency = 24000000UL, + }, { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, .bus_type = FIMC_MIPI_CSI2, .board_info = &m5mols_board_info, .i2c_bus_num = 0, @@ -927,9 +990,11 @@ static struct gpio universal_camera_gpios[] = { { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, + { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" }, + { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" }, }; -static void universal_camera_init(void) +static void __init universal_camera_init(void) { s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), &s5p_device_mipi_csis0); @@ -950,6 +1015,8 @@ static void universal_camera_init(void) /* Free GPIOs controlled directly by the sensor drivers. */ gpio_free(GPIO_CAM_MEGA_nRST); gpio_free(GPIO_CAM_8M_ISP_INT); + gpio_free(GPIO_CAM_VGA_NRST); + gpio_free(GPIO_CAM_VGA_NSTBY); if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) pr_err("Camera port A setup failed\n"); @@ -962,6 +1029,7 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, + &s5p_device_g2d, &mmc0_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, @@ -980,9 +1048,11 @@ static struct platform_device *universal_devices[] __initdata = { &universal_gpio_keys, &s5p_device_onenand, &s5p_device_fimd0, + &s5p_device_jpeg, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, + &cam_vt_dio_fixed_reg_dev, &cam_i_core_fixed_reg_dev, &cam_s_if_fixed_reg_dev, &s5p_device_fimc_md, diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3919fba52ac8..37a5d715a6c2 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -314,8 +314,10 @@ config MACH_IMX27_VISSTRIM_M10 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_MMC + select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_MMC + select LEDS_GPIO_REGISTER help Include support for Visstrim_m10 platform and its different variants. This includes specific configurations for the board and its @@ -486,6 +488,7 @@ config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select SOC_IMX31 select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 428459fbca4b..f7b074f496f0 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,6 +30,10 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/leds.h> +#include <linux/memblock.h> +#include <media/soc_camera.h> #include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -39,6 +43,8 @@ #include "devices-imx27.h" +#define TVP5150_RSTN (GPIO_PORTC + 18) +#define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) #define SDHC1_IRQ IRQ_GPIOB(25) @@ -100,8 +106,99 @@ static const int visstrim_m10_pins[] __initconst = { PE1_PF_USBOTG_STP, PB23_PF_USB_PWR, PB24_PF_USB_OC, + /* CSI */ + PB10_PF_CSI_D0, + PB11_PF_CSI_D1, + PB12_PF_CSI_D2, + PB13_PF_CSI_D3, + PB14_PF_CSI_D4, + PB15_PF_CSI_MCLK, + PB16_PF_CSI_PIXCLK, + PB17_PF_CSI_D5, + PB18_PF_CSI_D6, + PB19_PF_CSI_D7, + PB20_PF_CSI_VSYNC, + PB21_PF_CSI_HSYNC, }; +/* Camera */ +static int visstrim_camera_power(struct device *dev, int on) +{ + gpio_set_value(TVP5150_PWDN, on); + + return 0; +}; + +static int visstrim_camera_reset(struct device *dev) +{ + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + + return 0; +}; + +static struct i2c_board_info visstrim_i2c_camera = { + I2C_BOARD_INFO("tvp5150", 0x5d), +}; + +static struct soc_camera_link iclink_tvp5150 = { + .bus_id = 0, + .board_info = &visstrim_i2c_camera, + .i2c_adapter_id = 0, + .power = visstrim_camera_power, + .reset = visstrim_camera_reset, +}; + +static struct mx2_camera_platform_data visstrim_camera = { + .flags = MX2_CAMERA_CCIR | MX2_CAMERA_CCIR_INTERLACE | + MX2_CAMERA_SWAP16 | MX2_CAMERA_PCLK_SAMPLE_RISING, + .clk = 100000, +}; + +static phys_addr_t mx2_camera_base __initdata; +#define MX2_CAMERA_BUF_SIZE SZ_8M + +static void __init visstrim_camera_init(void) +{ + struct platform_device *pdev; + int dma; + + /* Initialize tvp5150 gpios */ + mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); + gpio_set_value(TVP5150_RSTN, 1); + gpio_set_value(TVP5150_PWDN, 0); + ndelay(1); + + gpio_set_value(TVP5150_PWDN, 1); + ndelay(1); + gpio_set_value(TVP5150_RSTN, 0); + ndelay(500); + gpio_set_value(TVP5150_RSTN, 1); + ndelay(200000); + + pdev = imx27_add_mx2_camera(&visstrim_camera); + if (IS_ERR(pdev)) + return; + + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base, mx2_camera_base, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + +static void __init visstrim_reserve(void) +{ + /* reserve 4 MiB for mx2-camera */ + mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE); + memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); + memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); +} + /* GPIOs used as events for applications */ static struct gpio_keys_button visstrim_gpio_keys[] = { { @@ -136,6 +233,35 @@ static const struct gpio_keys_platform_data .nbuttons = ARRAY_SIZE(visstrim_gpio_keys), }; +/* led */ +static const struct gpio_led visstrim_m10_leds[] __initconst = { + { + .name = "visstrim:ld0", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 29), + }, + { + .name = "visstrim:ld1", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 24), + }, + { + .name = "visstrim:ld2", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 28), + }, + { + .name = "visstrim:ld3", + .default_trigger = "nand-disk", + .gpio = (GPIO_PORTC + 25), + }, +}; + +static const struct gpio_led_platform_data visstrim_m10_led_data __initconst = { + .leds = visstrim_m10_leds, + .num_leds = ARRAY_SIZE(visstrim_m10_leds), +}; + /* Visstrim_SM10 has a microSD slot connected to sdhc1 */ static int visstrim_m10_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) @@ -216,6 +342,9 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("tlv320aic32x4", 0x18), .platform_data = &visstrim_m10_aic32x4_pdata, + }, + { + I2C_BOARD_INFO("m41t00", 0x68), } }; @@ -254,16 +383,21 @@ static void __init visstrim_m10_board_init(void) imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); - i2c_register_board_info(0, visstrim_m10_i2c_devices, - ARRAY_SIZE(visstrim_m10_i2c_devices)); imx27_add_imx_i2c(0, &visstrim_m10_i2c_data); imx27_add_imx_i2c(1, &visstrim_m10_i2c_data); + i2c_register_board_info(0, visstrim_m10_i2c_devices, + ARRAY_SIZE(visstrim_m10_i2c_devices)); + imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata); imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata); imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); + platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, + &iclink_tvp5150, sizeof(iclink_tvp5150)); + gpio_led_register_device(0, &visstrim_m10_led_data); + visstrim_camera_init(); } static void __init visstrim_m10_timer_init(void) @@ -277,6 +411,7 @@ static struct sys_timer visstrim_m10_timer = { MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10") .atag_offset = 0x100, + .reserve = visstrim_reserve, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index f225262b5c38..c0511fb1a5f9 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -530,6 +530,8 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); + imx31_add_imx2_wdt(NULL); + imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -590,7 +592,7 @@ static void __init mx31moboard_reserve(void) } MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard") - /* Maintainer: Valentin Longchamp, EPFL Mobots group */ + /* Maintainer: Philippe Retornaz, EPFL Mobots group */ .atag_offset = 0x100, .reserve = mx31moboard_reserve, .map_io = mx31_map_io, diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 0af6c9c5b3fd..e14291d89e4f 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -4,6 +4,11 @@ * * Author: Fabio Estevam <fabio.estevam@freescale.com> * + * Copyright (C) 2011 Meprolight, Ltd. + * Alex Gershgorin <alexg@meprolight.com> + * + * Modified from i.MX31 3-Stack Development System + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -34,15 +39,102 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <asm/mach/map.h> +#include <asm/memblock.h> #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/irqs.h> #include <mach/3ds_debugboard.h> +#include <video/platform_lcd.h> + +#include <media/soc_camera.h> #include "devices-imx35.h" +#define GPIO_MC9S08DZ60_GPS_ENABLE 0 +#define GPIO_MC9S08DZ60_HDD_ENABLE 4 +#define GPIO_MC9S08DZ60_WIFI_ENABLE 5 +#define GPIO_MC9S08DZ60_LCD_ENABLE 6 +#define GPIO_MC9S08DZ60_SPEAKER_ENABLE 8 + +static const struct fb_videomode fb_modedb[] = { + { + /* 800x480 @ 55 Hz */ + .name = "Ceramate-CLAA070VC01", + .refresh = 55, + .xres = 800, + .yres = 480, + .pixclock = 40000, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 5, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +static const struct ipu_platform_data mx3_ipu_data __initconst = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct mx3fb_platform_data mx3fb_pdata __initdata = { + .name = "Ceramate-CLAA070VC01", + .mode = fb_modedb, + .num_modes = ARRAY_SIZE(fb_modedb), +}; + +static struct i2c_board_info __initdata i2c_devices_3ds[] = { + { + I2C_BOARD_INFO("mc9s08dz60", 0x69), + }, +}; + +static int lcd_power_gpio = -ENXIO; + +static int mc9s08dz60_gpiochip_match(struct gpio_chip *chip, + void *data) +{ + return !strcmp(chip->label, data); +} + +static void mx35_3ds_lcd_set_power( + struct plat_lcd_data *pd, unsigned int power) +{ + struct gpio_chip *chip; + + if (!gpio_is_valid(lcd_power_gpio)) { + chip = gpiochip_find( + "mc9s08dz60", mc9s08dz60_gpiochip_match); + if (chip) { + lcd_power_gpio = + chip->base + GPIO_MC9S08DZ60_LCD_ENABLE; + if (gpio_request(lcd_power_gpio, "lcd_power") < 0) { + pr_err("error: gpio already requested!\n"); + lcd_power_gpio = -ENXIO; + } + } else { + pr_err("error: didn't find mc9s08dz60 gpio chip\n"); + } + } + + if (gpio_is_valid(lcd_power_gpio)) + gpio_set_value_cansleep(lcd_power_gpio, power); +} + +static struct plat_lcd_data mx35_3ds_lcd_data = { + .set_power = mx35_3ds_lcd_set_power, +}; + +static struct platform_device mx35_3ds_lcd = { + .name = "platform-lcd", + .dev.platform_data = &mx35_3ds_lcd_data, +}; + #define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) static const struct imxuart_platform_data uart_pdata __initconst = { @@ -120,6 +212,109 @@ static iomux_v3_cfg_t mx35pdk_pads[] = { /* I2C1 */ MX35_PAD_I2C1_CLK__I2C1_SCL, MX35_PAD_I2C1_DAT__I2C1_SDA, + /* Display */ + MX35_PAD_LD0__IPU_DISPB_DAT_0, + MX35_PAD_LD1__IPU_DISPB_DAT_1, + MX35_PAD_LD2__IPU_DISPB_DAT_2, + MX35_PAD_LD3__IPU_DISPB_DAT_3, + MX35_PAD_LD4__IPU_DISPB_DAT_4, + MX35_PAD_LD5__IPU_DISPB_DAT_5, + MX35_PAD_LD6__IPU_DISPB_DAT_6, + MX35_PAD_LD7__IPU_DISPB_DAT_7, + MX35_PAD_LD8__IPU_DISPB_DAT_8, + MX35_PAD_LD9__IPU_DISPB_DAT_9, + MX35_PAD_LD10__IPU_DISPB_DAT_10, + MX35_PAD_LD11__IPU_DISPB_DAT_11, + MX35_PAD_LD12__IPU_DISPB_DAT_12, + MX35_PAD_LD13__IPU_DISPB_DAT_13, + MX35_PAD_LD14__IPU_DISPB_DAT_14, + MX35_PAD_LD15__IPU_DISPB_DAT_15, + MX35_PAD_LD16__IPU_DISPB_DAT_16, + MX35_PAD_LD17__IPU_DISPB_DAT_17, + MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, + MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, + MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, + MX35_PAD_CONTRAST__IPU_DISPB_CONTR, + MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, + MX35_PAD_D3_REV__IPU_DISPB_D3_REV, + MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS, + /* CSI */ + MX35_PAD_TX1__IPU_CSI_D_6, + MX35_PAD_TX0__IPU_CSI_D_7, + MX35_PAD_CSI_D8__IPU_CSI_D_8, + MX35_PAD_CSI_D9__IPU_CSI_D_9, + MX35_PAD_CSI_D10__IPU_CSI_D_10, + MX35_PAD_CSI_D11__IPU_CSI_D_11, + MX35_PAD_CSI_D12__IPU_CSI_D_12, + MX35_PAD_CSI_D13__IPU_CSI_D_13, + MX35_PAD_CSI_D14__IPU_CSI_D_14, + MX35_PAD_CSI_D15__IPU_CSI_D_15, + MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC, + MX35_PAD_CSI_MCLK__IPU_CSI_MCLK, + MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK, + MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC, +}; + +/* + * Camera support +*/ +static phys_addr_t mx3_camera_base __initdata; +#define MX35_3DS_CAMERA_BUF_SIZE SZ_8M + +static const struct mx3_camera_pdata mx35_3ds_camera_pdata __initconst = { + .flags = MX3_CAMERA_DATAWIDTH_8, + .mclk_10khz = 2000, +}; + +static int __init imx35_3ds_init_camera(void) +{ + int dma, ret = -ENOMEM; + struct platform_device *pdev = + imx35_alloc_mx3_camera(&mx35_3ds_camera_pdata); + + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + if (!mx3_camera_base) + goto err; + + dma = dma_declare_coherent_memory(&pdev->dev, + mx3_camera_base, mx3_camera_base, + MX35_3DS_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + + if (!(dma & DMA_MEMORY_MAP)) + goto err; + + ret = platform_device_add(pdev); + if (ret) +err: + platform_device_put(pdev); + + return ret; +} + +static const struct ipu_platform_data mx35_3ds_ipu_data __initconst = { + .irq_base = MXC_IPU_IRQ_START, +}; + +static struct i2c_board_info mx35_3ds_i2c_camera = { + I2C_BOARD_INFO("ov2640", 0x30), +}; + +static struct soc_camera_link iclink_ov2640 = { + .bus_id = 0, + .board_info = &mx35_3ds_i2c_camera, + .i2c_adapter_id = 0, + .power = NULL, +}; + +static struct platform_device mx35_3ds_ov2640 = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &iclink_ov2640, + }, }; static int mx35_3ds_otg_init(struct platform_device *pdev) @@ -179,6 +374,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + struct platform_device *imx35_fb_pdev; + imx35_soc_init(); mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); @@ -204,6 +401,17 @@ static void __init mx35_3ds_init(void) pr_warn("Init of the debugboard failed, all " "devices on the debugboard are unusable.\n"); imx35_add_imx_i2c0(&mx35_3ds_i2c0_data); + + i2c_register_board_info( + 0, i2c_devices_3ds, ARRAY_SIZE(i2c_devices_3ds)); + + imx35_add_ipu_core(&mx35_3ds_ipu_data); + platform_device_register(&mx35_3ds_ov2640); + imx35_3ds_init_camera(); + + imx35_fb_pdev = imx35_add_mx3_sdc_fb(&mx3fb_pdata); + mx35_3ds_lcd.dev.parent = &imx35_fb_pdev->dev; + platform_device_register(&mx35_3ds_lcd); } static void __init mx35pdk_timer_init(void) @@ -215,6 +423,13 @@ struct sys_timer mx35pdk_timer = { .init = mx35pdk_timer_init, }; +static void __init mx35_3ds_reserve(void) +{ + /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */ + mx3_camera_base = arm_memblock_steal(MX35_3DS_CAMERA_BUF_SIZE, + MX35_3DS_CAMERA_BUF_SIZE); +} + MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ .atag_offset = 0x100, @@ -224,5 +439,6 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK") .handle_irq = imx35_handle_irq, .timer = &mx35pdk_timer, .init_machine = mx35_3ds_init, + .reserve = mx35_3ds_reserve, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 7fc603b46891..90ceab761929 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -44,6 +44,20 @@ config MACH_GURUPLUG Say 'Y' here if you want your kernel to support the Marvell GuruPlug Reference Board. +config ARCH_KIRKWOOD_DT + bool "Marvell Kirkwood Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Kirkwood using flattened device tree. + +config MACH_DREAMPLUG_DT + bool "Marvell DreamPlug (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Marvell DreamPlug (Flattened Device Tree). + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 5dcaa81a2ec3..acbc5e1db06f 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -20,3 +20,4 @@ obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o obj-$(CONFIG_MACH_T5325) += t5325-setup.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o +obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot index 760a0efe7580..16f938522304 100644 --- a/arch/arm/mach-kirkwood/Makefile.boot +++ b/arch/arm/mach-kirkwood/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c new file mode 100644 index 000000000000..fbe6405602ed --- /dev/null +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -0,0 +1,180 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-dt.c + * + * Marvell DreamPlug Reference Board Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/ata_platform.h> +#include <linux/mv643xx_eth.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include <plat/mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct of_device_id kirkwood_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + { } +}; + +struct mtd_partition dreamplug_partitions[] = { + { + .name = "u-boot", + .size = SZ_512K, + .offset = 0, + }, + { + .name = "u-boot env", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K, + }, + { + .name = "dtb", + .size = SZ_64K, + .offset = SZ_512K + SZ_512K + SZ_512K, + }, +}; + +static const struct flash_platform_data dreamplug_spi_slave_data = { + .type = "mx25l1606e", + .name = "spi_flash", + .parts = dreamplug_partitions, + .nr_parts = ARRAY_SIZE(dreamplug_partitions), +}; + +static struct spi_board_info __initdata dreamplug_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &dreamplug_spi_slave_data, + .irq = -1, + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + +static struct mv643xx_eth_platform_data dreamplug_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mv643xx_eth_platform_data dreamplug_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv_sata_platform_data dreamplug_sata_data = { + .n_ports = 1, +}; + +static struct mvsdio_platform_data dreamplug_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +static struct gpio_led dreamplug_led_pins[] = { + { + .name = "dreamplug:blue:bluetooth", + .gpio = 47, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi", + .gpio = 48, + .active_low = 1, + }, + { + .name = "dreamplug:green:wifi_ap", + .gpio = 49, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data dreamplug_led_data = { + .leds = dreamplug_led_pins, + .num_leds = ARRAY_SIZE(dreamplug_led_pins), +}; + +static struct platform_device dreamplug_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &dreamplug_led_data, + } +}; + +static unsigned int dreamplug_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP47_GPIO, /* Bluetooth LED */ + MPP48_GPIO, /* Wifi LED */ + MPP49_GPIO, /* Wifi AP LED */ + 0 +}; + +static void __init dreamplug_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(dreamplug_mpp_config); + + spi_register_board_info(dreamplug_spi_slave_info, + ARRAY_SIZE(dreamplug_spi_slave_info)); + kirkwood_spi_init(); + + kirkwood_ehci_init(); + kirkwood_ge00_init(&dreamplug_ge00_data); + kirkwood_ge01_init(&dreamplug_ge01_data); + kirkwood_sata_init(&dreamplug_sata_data); + kirkwood_sdio_init(&dreamplug_mvsdio_data); + + platform_device_register(&dreamplug_leds); +} + +static void __init kirkwood_dt_init(void) +{ + kirkwood_init(); + + if (of_machine_is_compatible("globalscale,dreamplug")) + dreamplug_init(); + + of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL); +} + +static const char *kirkwood_dt_board_compat[] = { + "globalscale,dreamplug", + NULL +}; + +DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)") + /* Maintainer: Jason Cooper <jason@lakedaemon.net> */ + .map_io = kirkwood_map_io, + .init_early = kirkwood_init_early, + .init_irq = kirkwood_init_irq, + .timer = &kirkwood_timer, + .init_machine = kirkwood_dt_init, + .restart = kirkwood_restart, + .dt_compat = kirkwood_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 617c60a170a4..c709a24a9d25 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -223,6 +223,7 @@ struct resource mmp2_resource_gpio[] = { }, { .start = IRQ_MMP2_GPIO, .end = IRQ_MMP2_GPIO, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index ada1213982b4..f10f87d8b667 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -166,6 +166,7 @@ struct resource pxa168_resource_gpio[] = { }, { .start = IRQ_PXA168_GPIOX, .end = IRQ_PXA168_GPIOX, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c index 3241a25784d0..0c87e69adf9f 100644 --- a/arch/arm/mach-mmp/pxa910.c +++ b/arch/arm/mach-mmp/pxa910.c @@ -173,6 +173,7 @@ struct resource pxa910_resource_gpio[] = { }, { .start = IRQ_PXA910_AP_GPIO, .end = IRQ_PXA910_AP_GPIO, + .name = "gpio_mux", .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index cf00b3e3be85..c57f9964a713 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -83,6 +83,18 @@ config MODULE_M28 select MXS_HAVE_PLATFORM_MXSFB select MXS_OCOTP +config MODULE_APX4 + bool + select SOC_IMX28 + select LEDS_GPIO_REGISTER + select MXS_HAVE_AMBA_DUART + select MXS_HAVE_PLATFORM_AUART + select MXS_HAVE_PLATFORM_FEC + select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC + select MXS_HAVE_PLATFORM_MXS_SAIF + select MXS_OCOTP + config MACH_TX28 bool "Ka-Ro TX28 module" select MODULE_TX28 @@ -91,4 +103,8 @@ config MACH_M28EVK bool "Support DENX M28EVK Platform" select MODULE_M28 +config MACH_APX4DEVKIT + bool "Support Bluegiga APX4 Development Kit" + select MODULE_APX4 + endif diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 8c93b24896bf..908bf9a567f1 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o obj-$(CONFIG_MACH_M28EVK) += mach-m28evk.o +obj-$(CONFIG_MACH_APX4DEVKIT) += mach-apx4devkit.o obj-$(CONFIG_MODULE_TX28) += module-tx28.o obj-$(CONFIG_MACH_TX28) += mach-tx28.o diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h index 49a888c65d6d..17964066303f 100644 --- a/arch/arm/mach-mxs/include/mach/digctl.h +++ b/arch/arm/mach-mxs/include/mach/digctl.h @@ -18,4 +18,5 @@ #define HW_DIGCTL_CTRL 0x0 #define BP_DIGCTL_CTRL_SAIF_CLKMUX 10 #define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10) +#define HW_DIGCTL_CHIPID 0x310 #endif diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index bde5f6634747..7d4fb6d0afda 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -23,22 +23,10 @@ #include <linux/io.h> #endif #include <asm/mach-types.h> +#include <mach/digctl.h> #include <mach/hardware.h> /* - * MXS CPU types - */ -#define cpu_is_mx23() ( \ - machine_is_mx23evk() || \ - machine_is_stmp378x() || \ - 0) -#define cpu_is_mx28() ( \ - machine_is_mx28evk() || \ - machine_is_m28evk() || \ - machine_is_tx28() || \ - 0) - -/* * IO addresses common to MXS-based */ #define MXS_IO_BASE_ADDR 0x80000000 @@ -109,6 +97,21 @@ static inline void __mxs_togl(u32 mask, void __iomem *reg) { __raw_writel(mask, reg + MXS_TOG_ADDR); } + +/* + * MXS CPU types + */ +#define MXS_CHIPID (MXS_IO_ADDRESS(MXS_DIGCTL_BASE_ADDR) + HW_DIGCTL_CHIPID) + +static inline int cpu_is_mx23(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x3780); +} + +static inline int cpu_is_mx28(void) +{ + return ((__raw_readl(MXS_CHIPID) >> 16) == 0x2800); +} #endif #endif /* __MACH_MXS_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h index 67776746f143..ef2811495446 100644 --- a/arch/arm/mach-mxs/include/mach/uncompress.h +++ b/arch/arm/mach-mxs/include/mach/uncompress.h @@ -18,8 +18,6 @@ #ifndef __MACH_MXS_UNCOMPRESS_H__ #define __MACH_MXS_UNCOMPRESS_H__ -#include <asm/mach-types.h> - unsigned long mxs_duart_base; #define MXS_DUART(x) (*(volatile unsigned long *)(mxs_duart_base + (x))) @@ -55,16 +53,17 @@ static inline void flush(void) #define MX23_DUART_BASE_ADDR 0x80070000 #define MX28_DUART_BASE_ADDR 0x80074000 +#define MXS_DIGCTL_CHIPID 0x8001c310 static inline void __arch_decomp_setup(unsigned long arch_id) { - switch (arch_id) { - case MACH_TYPE_MX23EVK: + u16 chipid = (*(volatile unsigned long *) MXS_DIGCTL_CHIPID) >> 16; + + switch (chipid) { + case 0x3780: mxs_duart_base = MX23_DUART_BASE_ADDR; break; - case MACH_TYPE_MX28EVK: - case MACH_TYPE_M28EVK: - case MACH_TYPE_TX28: + case 0x2800: mxs_duart_base = MX28_DUART_BASE_ADDR; break; default: diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c new file mode 100644 index 000000000000..48a7fab571a6 --- /dev/null +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -0,0 +1,260 @@ +/* + * Copyright (C) 2011-2012 + * Lauri Hintsala, Bluegiga, <lauri.hintsala@bluegiga.com> + * Veli-Pekka Peltola, Bluegiga, <veli-pekka.peltola@bluegiga.com> + * + * based on: mach-mx28evk.c + * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/micrel_phy.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include <mach/common.h> +#include <mach/digctl.h> +#include <mach/iomux-mx28.h> + +#include "devices-mx28.h" + +#define APX4DEVKIT_GPIO_USERLED MXS_GPIO_NR(3, 28) + +static const iomux_cfg_t apx4devkit_pads[] __initconst = { + /* duart */ + MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL, + MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL, + + /* auart0 */ + MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL, + MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL, + MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL, + MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL, + + /* auart1 */ + MX28_PAD_AUART1_RX__AUART1_RX | MXS_PAD_CTRL, + MX28_PAD_AUART1_TX__AUART1_TX | MXS_PAD_CTRL, + + /* auart2 */ + MX28_PAD_SSP2_SCK__AUART2_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_MOSI__AUART2_TX | MXS_PAD_CTRL, + + /* auart3 */ + MX28_PAD_SSP2_MISO__AUART3_RX | MXS_PAD_CTRL, + MX28_PAD_SSP2_SS0__AUART3_TX | MXS_PAD_CTRL, + +#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP) + /* fec0 */ + MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC, + MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC, + MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC, + MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC, + MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC, + MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC, + + /* i2c */ + MX28_PAD_I2C0_SCL__I2C0_SCL, + MX28_PAD_I2C0_SDA__I2C0_SDA, + + /* mmc0 */ + MX28_PAD_SSP0_DATA0__SSP0_D0 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA1__SSP0_D1 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA2__SSP0_D2 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA3__SSP0_D3 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA4__SSP0_D4 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA5__SSP0_D5 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA6__SSP0_D6 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DATA7__SSP0_D7 | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_CMD__SSP0_CMD | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX28_PAD_SSP0_SCK__SSP0_SCK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL, + + /* saif0 & saif1 */ + MX28_PAD_SAIF0_MCLK__SAIF0_MCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), + MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 | + (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), +}; + +/* led */ +static const struct gpio_led apx4devkit_leds[] __initconst = { + { + .name = "user-led", + .default_trigger = "heartbeat", + .gpio = APX4DEVKIT_GPIO_USERLED, + }, +}; + +static const struct gpio_led_platform_data apx4devkit_led_data __initconst = { + .leds = apx4devkit_leds, + .num_leds = ARRAY_SIZE(apx4devkit_leds), +}; + +static const struct fec_platform_data mx28_fec_pdata __initconst = { + .phy = PHY_INTERFACE_MODE_RMII, +}; + +static const struct mxs_mmc_platform_data apx4devkit_mmc_pdata __initconst = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + +static const struct i2c_board_info apx4devkit_i2c_boardinfo[] __initconst = { + { I2C_BOARD_INFO("sgtl5000", 0x0a) }, /* ASoC */ + { I2C_BOARD_INFO("pcf8563", 0x51) }, /* RTC */ +}; + +#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || \ + defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE) +static struct regulator_consumer_supply apx4devkit_audio_consumer_supplies[] = { + REGULATOR_SUPPLY("VDDA", "0-000a"), + REGULATOR_SUPPLY("VDDIO", "0-000a"), +}; + +static struct regulator_init_data apx4devkit_vdd_reg_init_data = { + .constraints = { + .name = "3V3", + .always_on = 1, + }, + .consumer_supplies = apx4devkit_audio_consumer_supplies, + .num_consumer_supplies = ARRAY_SIZE(apx4devkit_audio_consumer_supplies), +}; + +static struct fixed_voltage_config apx4devkit_vdd_pdata = { + .supply_name = "board-3V3", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &apx4devkit_vdd_reg_init_data, +}; + +static struct platform_device apx4devkit_voltage_regulator = { + .name = "reg-fixed-voltage", + .id = -1, + .num_resources = 0, + .dev = { + .platform_data = &apx4devkit_vdd_pdata, + }, +}; + +static void __init apx4devkit_add_regulators(void) +{ + platform_device_register(&apx4devkit_voltage_regulator); +} +#else +static void __init apx4devkit_add_regulators(void) {} +#endif + +static const struct mxs_saif_platform_data + apx4devkit_mxs_saif_pdata[] __initconst = { + /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */ + { + .master_mode = 1, + .master_id = 0, + }, { + .master_mode = 0, + .master_id = 0, + }, +}; + +static int apx4devkit_phy_fixup(struct phy_device *phy) +{ + phy->dev_flags |= MICREL_PHY_50MHZ_CLK; + return 0; +} + +static void __init apx4devkit_init(void) +{ + mxs_iomux_setup_multiple_pads(apx4devkit_pads, + ARRAY_SIZE(apx4devkit_pads)); + + mx28_add_duart(); + mx28_add_auart0(); + mx28_add_auart1(); + mx28_add_auart2(); + mx28_add_auart3(); + + /* + * Register fixup for the Micrel KS8031 PHY clock + * (shares same ID with KS8051) + */ + phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, + apx4devkit_phy_fixup); + + mx28_add_fec(0, &mx28_fec_pdata); + + mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); + + gpio_led_register_device(0, &apx4devkit_led_data); + + mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); + mx28_add_saif(0, &apx4devkit_mxs_saif_pdata[0]); + mx28_add_saif(1, &apx4devkit_mxs_saif_pdata[1]); + + apx4devkit_add_regulators(); + + mx28_add_mxs_i2c(0); + i2c_register_board_info(0, apx4devkit_i2c_boardinfo, + ARRAY_SIZE(apx4devkit_i2c_boardinfo)); + + mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); +} + +static void __init apx4devkit_timer_init(void) +{ + mx28_clocks_init(); +} + +static struct sys_timer apx4devkit_timer = { + .init = apx4devkit_timer_init, +}; + +MACHINE_START(APX4DEVKIT, "Bluegiga APX4 Development Kit") + .map_io = mx28_map_io, + .init_irq = mx28_init_irq, + .timer = &apx4devkit_timer, + .init_machine = apx4devkit_init, + .restart = mxs_restart, +MACHINE_END diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 2f2758230edf..06d79963611c 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -247,18 +247,15 @@ static int __init m28evk_fec_get_mac(void) u32 val; const u32 *ocotp = mxs_get_ocotp(); - if (!ocotp) { - pr_err("%s: timeout when reading fec mac from OCOTP\n", - __func__); + if (!ocotp) return -ETIMEDOUT; - } /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code DENX OUI (C0:E5:4E) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0xC0; mx28_fec_pdata[i].mac[1] = 0xE5; mx28_fec_pdata[i].mac[2] = 0x4E; diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index fdb0a5664dd6..e386c142f93c 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -223,7 +223,6 @@ static const struct gpio_led_platform_data mx28evk_led_data __initconst = { /* fec */ static void __init mx28evk_fec_reset(void) { - int ret; struct clk *clk; /* Enable fec phy clock */ @@ -231,32 +230,7 @@ static void __init mx28evk_fec_reset(void) if (!IS_ERR(clk)) clk_prepare_enable(clk); - /* Power up fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret); - return; - } - - /* Reset fec phy */ - ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset"); - if (ret) { - pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - - gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0); - if (ret) { - pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret); - return; - } - + gpio_set_value(MX28EVK_FEC_PHY_RESET, 0); mdelay(1); gpio_set_value(MX28EVK_FEC_PHY_RESET, 1); } @@ -278,14 +252,14 @@ static int __init mx28evk_fec_get_mac(void) const u32 *ocotp = mxs_get_ocotp(); if (!ocotp) - goto error; + return -ETIMEDOUT; /* * OCOTP only stores the last 4 octets for each mac address, * so hard-code Freescale OUI (00:04:9f) here. */ for (i = 0; i < 2; i++) { - val = ocotp[i * 4]; + val = ocotp[i]; mx28_fec_pdata[i].mac[0] = 0x00; mx28_fec_pdata[i].mac[1] = 0x04; mx28_fec_pdata[i].mac[2] = 0x9f; @@ -295,10 +269,6 @@ static int __init mx28evk_fec_get_mac(void) } return 0; - -error: - pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__); - return -ETIMEDOUT; } /* @@ -417,9 +387,14 @@ static void __init mx28evk_add_regulators(void) static void __init mx28evk_add_regulators(void) {} #endif -static struct gpio mx28evk_lcd_gpios[] = { +static const struct gpio mx28evk_gpios[] __initconst = { { MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" }, { MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" }, + { MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, "flexcan-switch" }, + { MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc0-slot-power" }, + { MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, "mmc1-slot-power" }, + { MX28EVK_FEC_PHY_POWER, GPIOF_OUT_INIT_LOW, "fec-phy-power" }, + { MX28EVK_FEC_PHY_RESET, GPIOF_DIR_OUT, "fec-phy-reset" }, }; static const struct mxs_saif_platform_data @@ -447,25 +422,18 @@ static void __init mx28evk_init(void) if (mx28evk_fec_get_mac()) pr_warn("%s: failed on fec mac setup\n", __func__); + ret = gpio_request_array(mx28evk_gpios, ARRAY_SIZE(mx28evk_gpios)); + if (ret) + pr_err("One or more GPIOs failed to be requested: %d\n", ret); + mx28evk_fec_reset(); mx28_add_fec(0, &mx28_fec_pdata[0]); mx28_add_fec(1, &mx28_fec_pdata[1]); - ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT, - "flexcan-switch"); - if (ret) { - pr_err("failed to request gpio flexcan-switch: %d\n", ret); - } else { - mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); - mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - } + mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]); + mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]); - ret = gpio_request_array(mx28evk_lcd_gpios, - ARRAY_SIZE(mx28evk_lcd_gpios)); - if (ret) - pr_warn("failed to request gpio pins for lcd: %d\n", ret); - else - mx28_add_mxsfb(&mx28evk_mxsfb_pdata); + mx28_add_mxsfb(&mx28evk_mxsfb_pdata); mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0); mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]); @@ -480,20 +448,8 @@ static void __init mx28evk_init(void) mxs_add_platform_device("mxs-sgtl5000", 0, NULL, 0, NULL, 0); - /* power on mmc slot by writing 0 to the gpio */ - ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc0-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc0-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); - - ret = gpio_request_one(MX28EVK_MMC1_SLOT_POWER, GPIOF_OUT_INIT_LOW, - "mmc1-slot-power"); - if (ret) - pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); - else - mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + mx28_add_mxs_mmc(0, &mx28evk_mmc_pdata[0]); + mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); mx28_add_rtc_stmp3xxx(); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 922ab0dc2bcd..dfab466ebd1d 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -152,6 +152,10 @@ config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX select FIQ + select GPIO_GENERIC_PLATFORM + select LEDS_GPIO_REGISTER + select REGULATOR + select REGULATOR_FIXED_VOLTAGE help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 83eac744ddb9..c1b681ef4cba 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/basic_mmio_gpio.h> #include <linux/gpio.h> #include <linux/kernel.h> #include <linux/init.h> @@ -18,6 +19,9 @@ #include <linux/interrupt.h> #include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/serial_8250.h> #include <linux/export.h> #include <linux/omapfb.h> @@ -43,9 +47,6 @@ #include "iomap.h" #include "common.h" -static u8 ams_delta_latch1_reg; -static u16 ams_delta_latch2_reg; - static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ @@ -124,54 +125,188 @@ static const unsigned int ams_delta_keymap[] = { KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; -void ams_delta_latch1_write(u8 mask, u8 value) -{ - ams_delta_latch1_reg &= ~mask; - ams_delta_latch1_reg |= value; - *(volatile __u8 *) AMS_DELTA_LATCH1_VIRT = ams_delta_latch1_reg; -} - -void ams_delta_latch2_write(u16 mask, u16 value) -{ - ams_delta_latch2_reg &= ~mask; - ams_delta_latch2_reg |= value; - *(volatile __u16 *) AMS_DELTA_LATCH2_VIRT = ams_delta_latch2_reg; -} +#define LATCH1_PHYS 0x01000000 +#define LATCH1_VIRT 0xEA000000 +#define MODEM_PHYS 0x04000000 +#define MODEM_VIRT 0xEB000000 +#define LATCH2_PHYS 0x08000000 +#define LATCH2_VIRT 0xEC000000 static struct map_desc ams_delta_io_desc[] __initdata = { /* AMS_DELTA_LATCH1 */ { - .virtual = AMS_DELTA_LATCH1_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH1_PHYS), + .virtual = LATCH1_VIRT, + .pfn = __phys_to_pfn(LATCH1_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_LATCH2 */ { - .virtual = AMS_DELTA_LATCH2_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_LATCH2_PHYS), + .virtual = LATCH2_VIRT, + .pfn = __phys_to_pfn(LATCH2_PHYS), .length = 0x01000000, .type = MT_DEVICE }, /* AMS_DELTA_MODEM */ { - .virtual = AMS_DELTA_MODEM_VIRT, - .pfn = __phys_to_pfn(AMS_DELTA_MODEM_PHYS), + .virtual = MODEM_VIRT, + .pfn = __phys_to_pfn(MODEM_PHYS), .length = 0x01000000, .type = MT_DEVICE } }; -static struct omap_lcd_config ams_delta_lcd_config = { +static struct omap_lcd_config ams_delta_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct omap_usb_config ams_delta_usb_config __initdata = { +static struct omap_usb_config ams_delta_usb_config = { .register_host = 1, .hmc_mode = 16, .pins[0] = 2, }; +#define LATCH1_GPIO_BASE 232 +#define LATCH1_NGPIO 8 + +static struct resource latch1_resources[] = { + [0] = { + .name = "dat", + .start = LATCH1_PHYS, + .end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch1_pdata = { + .base = LATCH1_GPIO_BASE, + .ngpio = LATCH1_NGPIO, +}; + +static struct platform_device latch1_gpio_device = { + .name = "basic-mmio-gpio", + .id = 0, + .resource = latch1_resources, + .num_resources = ARRAY_SIZE(latch1_resources), + .dev = { + .platform_data = &latch1_pdata, + }, +}; + +static struct resource latch2_resources[] = { + [0] = { + .name = "dat", + .start = LATCH2_PHYS, + .end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8, + .flags = IORESOURCE_MEM, + }, +}; + +static struct bgpio_pdata latch2_pdata = { + .base = AMS_DELTA_LATCH2_GPIO_BASE, + .ngpio = AMS_DELTA_LATCH2_NGPIO, +}; + +static struct platform_device latch2_gpio_device = { + .name = "basic-mmio-gpio", + .id = 1, + .resource = latch2_resources, + .num_resources = ARRAY_SIZE(latch2_resources), + .dev = { + .platform_data = &latch2_pdata, + }, +}; + +static const struct gpio latch_gpios[] __initconst = { + { + .gpio = LATCH1_GPIO_BASE + 6, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit1", + }, + { + .gpio = LATCH1_GPIO_BASE + 7, + .flags = GPIOF_OUT_INIT_LOW, + .label = "dockit2", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_rstin", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "scard_cmdvcc", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC, + .flags = GPIOF_OUT_INIT_LOW, + .label = "modem_codec", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash1", + }, + { + .gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15, + .flags = GPIOF_OUT_INIT_LOW, + .label = "hookflash2", + }, +}; + +static struct regulator_consumer_supply modem_nreset_consumers[] = { + REGULATOR_SUPPLY("RESET#", "serial8250.1"), + REGULATOR_SUPPLY("POR", "cx20442-codec"), +}; + +static struct regulator_init_data modem_nreset_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers), + .consumer_supplies = modem_nreset_consumers, +}; + +static struct fixed_voltage_config modem_nreset_config = { + .supply_name = "modem_nreset", + .microvolts = 3300000, + .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, + .startup_delay = 25000, + .enable_high = 1, + .enabled_at_boot = 1, + .init_data = &modem_nreset_data, +}; + +static struct platform_device modem_nreset_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &modem_nreset_config, + }, +}; + +struct modem_private_data { + struct regulator *regulator; +}; + +static struct modem_private_data modem_priv; + +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value) +{ + int bit = 0; + u16 bitpos = 1 << bit; + + for (; bit < ngpio; bit++, bitpos = bitpos << 1) { + if (!(mask & bitpos)) + continue; + else + gpio_set_value(base + bit, (value & bitpos) != 0); + } +} +EXPORT_SYMBOL(ams_delta_latch_write); + static struct resource ams_delta_nand_resources[] = { [0] = { .start = OMAP1_MPUIO_BASE, @@ -201,7 +336,7 @@ static const struct matrix_keymap_data ams_delta_keymap_data = { .keymap_size = ARRAY_SIZE(ams_delta_keymap), }; -static struct omap_kp_platform_data ams_delta_kp_data __initdata = { +static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, .keymap_data = &ams_delta_keymap_data, @@ -223,9 +358,45 @@ static struct platform_device ams_delta_lcd_device = { .id = -1, }; -static struct platform_device ams_delta_led_device = { - .name = "ams-delta-led", - .id = -1 +static const struct gpio_led gpio_leds[] __initconst = { + { + .name = "camera", + .gpio = LATCH1_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_OFF, +#ifdef CONFIG_LEDS_TRIGGERS + .default_trigger = "ams_delta_camera", +#endif + }, + { + .name = "advert", + .gpio = LATCH1_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "email", + .gpio = LATCH1_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "handsfree", + .gpio = LATCH1_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voicemail", + .gpio = LATCH1_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, + { + .name = "voice", + .gpio = LATCH1_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_OFF, + }, +}; + +static const struct gpio_led_platform_data leds_pdata __initconst = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct i2c_board_info ams_delta_camera_board_info[] = { @@ -274,13 +445,17 @@ static struct omap1_cam_platform_data ams_delta_camera_platform_data = { }; static struct platform_device *ams_delta_devices[] __initdata = { - &ams_delta_nand_device, + &latch1_gpio_device, + &latch2_gpio_device, &ams_delta_kp_device, - &ams_delta_lcd_device, - &ams_delta_led_device, &ams_delta_camera_device, }; +static struct platform_device *late_devices[] __initdata = { + &ams_delta_nand_device, + &ams_delta_lcd_device, +}; + static void __init ams_delta_init(void) { /* mux pins for uarts */ @@ -304,15 +479,13 @@ static void __init ams_delta_init(void) omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); - /* Clear latch2 (NAND, LCD, modem enable) */ - ams_delta_latch2_write(~0, 0); - omap1_usb_init(&ams_delta_usb_config); omap1_set_camera_info(&ams_delta_camera_platform_data); #ifdef CONFIG_LEDS_TRIGGERS led_trigger_register_simple("ams_delta_camera", &ams_delta_camera_led_trigger); #endif + gpio_led_register_device(-1, &leds_pdata); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); ams_delta_init_fiq(); @@ -322,16 +495,34 @@ static void __init ams_delta_init(void) omapfb_set_lcd_config(&ams_delta_lcd_config); } +static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) +{ + struct modem_private_data *priv = port->private_data; + + if (IS_ERR(priv->regulator)) + return; + + if (state == old) + return; + + if (state == 0) + regulator_enable(priv->regulator); + else if (old == 0) + regulator_disable(priv->regulator); +} + static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = IOMEM(AMS_DELTA_MODEM_VIRT), - .mapbase = AMS_DELTA_MODEM_PHYS, + .membase = IOMEM(MODEM_VIRT), + .mapbase = MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, .regshift = 1, .uartclk = BASE_BAUD * 16, + .pm = modem_pm, + .private_data = &modem_priv, }, { }, }; @@ -344,13 +535,27 @@ static struct platform_device ams_delta_modem_device = { }, }; -static int __init ams_delta_modem_init(void) +static int __init late_init(void) { int err; if (!machine_is_ams_delta()) return -ENODEV; + err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios)); + if (err) { + pr_err("Couldn't take over latch1/latch2 GPIO pins\n"); + return err; + } + + platform_add_devices(late_devices, ARRAY_SIZE(late_devices)); + + err = platform_device_register(&modem_nreset_device); + if (err) { + pr_err("Couldn't register the modem regulator device\n"); + return err; + } + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); @@ -362,13 +567,35 @@ static int __init ams_delta_modem_init(void) } gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ); - ams_delta_latch2_write( - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC, - AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC); + /* Initialize the modem_nreset regulator consumer before use */ + modem_priv.regulator = ERR_PTR(-ENODEV); + + ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, + AMS_DELTA_LATCH2_MODEM_CODEC); + + err = platform_device_register(&ams_delta_modem_device); + if (err) + goto gpio_free; - return platform_device_register(&ams_delta_modem_device); + /* + * Once the modem device is registered, the modem_nreset + * regulator can be requested on behalf of that device. + */ + modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev, + "RESET#"); + if (IS_ERR(modem_priv.regulator)) { + err = PTR_ERR(modem_priv.regulator); + goto unregister; + } + return 0; + +unregister: + platform_device_unregister(&ams_delta_modem_device); +gpio_free: + gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ); + return err; } -arch_initcall(ams_delta_modem_init); +late_initcall(late_init); static void __init ams_delta_map_io(void) { @@ -387,6 +614,3 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .timer = &omap1_timer, .restart = omap1_restart, MACHINE_END - -EXPORT_SYMBOL(ams_delta_latch1_write); -EXPORT_SYMBOL(ams_delta_latch2_write); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 21a4095a1000..36b371face3d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -245,10 +245,11 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RM680 - bool "Nokia RM-680 board" + bool "Nokia RM-680/696 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_NOKIA_RM696 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 3f850fca8c92..49f92bc1c311 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -270,4 +270,7 @@ ifneq ($(CONFIG_HWSPINLOCK_OMAP),) obj-y += hwspinlock.o endif +emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o +obj-y += $(emac-m) $(emac-y) + obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c new file mode 100644 index 000000000000..1f97e7475206 --- /dev/null +++ b/arch/arm/mach-omap2/am35xx-emac.c @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems + * + * Based on mach-omap2/board-am3517evm.c + * Copyright (C) 2009 Texas Instruments Incorporated + * Author: Ranjith Lohithakshan <ranjithl@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind, + * whether express or implied; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/davinci_emac.h> +#include <linux/platform_device.h> +#include <plat/irqs.h> +#include <mach/am35xx.h> + +#include "control.h" + +static struct mdio_platform_data am35xx_emac_mdio_pdata; + +static struct resource am35xx_emac_mdio_resources[] = { + DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, SZ_4K), +}; + +static struct platform_device am35xx_emac_mdio_device = { + .name = "davinci_mdio", + .id = 0, + .num_resources = ARRAY_SIZE(am35xx_emac_mdio_resources), + .resource = am35xx_emac_mdio_resources, + .dev.platform_data = &am35xx_emac_mdio_pdata, +}; + +static void am35xx_enable_emac_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR | + AM35XX_CPGMAC_C0_MISC_PULSE_CLR | + AM35XX_CPGMAC_C0_RX_THRESH_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static void am35xx_disable_emac_int(void) +{ + u32 regval; + + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | + AM35XX_CPGMAC_C0_TX_PULSE_CLR); + omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); + regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); +} + +static struct emac_platform_data am35xx_emac_pdata = { + .ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET, + .ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET, + .ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET, + .ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE, + .hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR, + .version = EMAC_VERSION_2, + .interrupt_enable = am35xx_enable_emac_int, + .interrupt_disable = am35xx_disable_emac_int, +}; + +static struct resource am35xx_emac_resources[] = { + DEFINE_RES_MEM(AM35XX_IPSS_EMAC_BASE, 0x30000), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RXTHRESH_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_RX_PULSE_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_TX_PULSE_IRQ), + DEFINE_RES_IRQ(INT_35XX_EMAC_C0_MISC_PULSE_IRQ), +}; + +static struct platform_device am35xx_emac_device = { + .name = "davinci_emac", + .id = -1, + .num_resources = ARRAY_SIZE(am35xx_emac_resources), + .resource = am35xx_emac_resources, + .dev = { + .platform_data = &am35xx_emac_pdata, + }, +}; + +void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) +{ + unsigned int regval; + int err; + + am35xx_emac_pdata.rmii_en = rmii_en; + am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq; + err = platform_device_register(&am35xx_emac_device); + if (err) { + pr_err("AM35x: failed registering EMAC device: %d\n", err); + return; + } + + err = platform_device_register(&am35xx_emac_mdio_device); + if (err) { + pr_err("AM35x: failed registering EMAC MDIO device: %d\n", err); + platform_device_unregister(&am35xx_emac_device); + return; + } + + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); + regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); +} diff --git a/arch/arm/mach-omap2/am35xx-emac.h b/arch/arm/mach-omap2/am35xx-emac.h new file mode 100644 index 000000000000..15c6f9ce59a2 --- /dev/null +++ b/arch/arm/mach-omap2/am35xx-emac.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2011 Ilya Yanok, Emcraft Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define AM35XX_DEFAULT_MDIO_FREQUENCY 1000000 + +#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE) +void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en); +#else +static inline void am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en) {} +#endif diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 890c446e7b35..30768c2f53fd 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -324,7 +324,10 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { .bus_num = 1, .chip_select = 0, .max_speed_hz = 24000000, - .irq = ETH_KS8851_IRQ, + /* + * .irq is set to gpio_to_irq(ETH_KS8851_IRQ) + * in omap_4430sdp_init + */ }, }; diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 71138a1271d8..3645285a3e2b 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -39,124 +39,11 @@ #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-dvi.h> +#include "am35xx-emac.h" #include "mux.h" #include "control.h" #include "hsmmc.h" -#define AM35XX_EVM_MDIO_FREQUENCY (1000000) - -static struct mdio_platform_data am3517_evm_mdio_pdata = { - .bus_freq = AM35XX_EVM_MDIO_FREQUENCY, -}; - -static struct resource am3517_mdio_resources[] = { - { - .start = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET, - .end = AM35XX_IPSS_EMAC_BASE + AM35XX_EMAC_MDIO_OFFSET + - SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device am3517_mdio_device = { - .name = "davinci_mdio", - .id = 0, - .num_resources = ARRAY_SIZE(am3517_mdio_resources), - .resource = am3517_mdio_resources, - .dev.platform_data = &am3517_evm_mdio_pdata, -}; - -static struct emac_platform_data am3517_evm_emac_pdata = { - .rmii_en = 1, -}; - -static struct resource am3517_emac_resources[] = { - { - .start = AM35XX_IPSS_EMAC_BASE, - .end = AM35XX_IPSS_EMAC_BASE + 0x2FFFF, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_35XX_EMAC_C0_RXTHRESH_IRQ, - .end = INT_35XX_EMAC_C0_RXTHRESH_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_RX_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_RX_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_TX_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_TX_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, - { - .start = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, - .end = INT_35XX_EMAC_C0_MISC_PULSE_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device am3517_emac_device = { - .name = "davinci_emac", - .id = -1, - .num_resources = ARRAY_SIZE(am3517_emac_resources), - .resource = am3517_emac_resources, -}; - -static void am3517_enable_ethernet_int(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR | - AM35XX_CPGMAC_C0_MISC_PULSE_CLR | - AM35XX_CPGMAC_C0_RX_THRESH_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am3517_disable_ethernet_int(void) -{ - u32 regval; - - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = (regval | AM35XX_CPGMAC_C0_RX_PULSE_CLR | - AM35XX_CPGMAC_C0_TX_PULSE_CLR); - omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR); - regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); -} - -static void am3517_evm_ethernet_init(struct emac_platform_data *pdata) -{ - unsigned int regval; - - pdata->ctrl_reg_offset = AM35XX_EMAC_CNTRL_OFFSET; - pdata->ctrl_mod_reg_offset = AM35XX_EMAC_CNTRL_MOD_OFFSET; - pdata->ctrl_ram_offset = AM35XX_EMAC_CNTRL_RAM_OFFSET; - pdata->ctrl_ram_size = AM35XX_EMAC_CNTRL_RAM_SIZE; - pdata->version = EMAC_VERSION_2; - pdata->hw_ram_addr = AM35XX_EMAC_HW_RAM_ADDR; - pdata->interrupt_enable = am3517_enable_ethernet_int; - pdata->interrupt_disable = am3517_disable_ethernet_int; - am3517_emac_device.dev.platform_data = pdata; - platform_device_register(&am3517_emac_device); - platform_device_register(&am3517_mdio_device); - clk_add_alias(NULL, dev_name(&am3517_mdio_device.dev), - NULL, &am3517_emac_device.dev); - - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - regval = regval & (~(AM35XX_CPGMACSS_SW_RST)); - omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); - regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); - - return ; -} - - - #define LCD_PANEL_PWR 176 #define LCD_PANEL_BKLIGHT_PWR 182 #define LCD_PANEL_PWM 181 @@ -498,7 +385,7 @@ static void __init am3517_evm_init(void) i2c_register_board_info(1, am3517evm_i2c1_boardinfo, ARRAY_SIZE(am3517evm_i2c1_boardinfo)); /*Ethernet*/ - am3517_evm_ethernet_init(&am3517_evm_emac_pdata); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); /* MUSB */ am3517_evm_musb_init(); diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index f36d694d2159..9e66e167e4f3 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -49,6 +49,7 @@ #include "mux.h" #include "control.h" #include "common-board-devices.h" +#include "am35xx-emac.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -291,6 +292,7 @@ static void __init cm_t3517_init(void) cm_t3517_init_rtc(); cm_t3517_init_usbh(); cm_t3517_init_hecc(); + am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } MACHINE_START(CM_T3517, "Compulab CM-T3517") diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 2304ba340e99..4a7d8c8a75da 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -205,6 +205,7 @@ static void __init omap3logic_init(void) MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .atag_offset = 0x100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, @@ -216,6 +217,7 @@ MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .atag_offset = 0x100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap35xx_init_early, .init_irq = omap3_init_irq, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7184b8b9e38f..33d995d0f075 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -121,6 +121,11 @@ static struct platform_device pandora_leds_gpio = { }, }; +static struct platform_device pandora_backlight = { + .name = "pandora-backlight", + .id = -1, +}; + #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ { \ .gpio = gpio_num, \ @@ -478,6 +483,10 @@ static struct platform_device pandora_vwlan_device = { static struct twl4030_bci_platform_data pandora_bci_data; +static struct twl4030_power_data pandora_power_data = { + .use_poweroff = true, +}; + static struct twl4030_platform_data omap3pandora_twldata = { .gpio = &omap3pandora_gpio_data, .vmmc1 = &pandora_vmmc1, @@ -488,6 +497,7 @@ static struct twl4030_platform_data omap3pandora_twldata = { .vsim = &pandora_vsim, .keypad = &pandora_kp_data, .bci = &pandora_bci_data, + .power = &pandora_power_data, }; static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { @@ -559,6 +569,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, &pandora_vwlan_device, + &pandora_backlight, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 866411d4fe65..e9071a57c37b 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -116,10 +116,16 @@ static struct platform_device panda_abe_audio = { }, }; +static struct platform_device btwilink_device = { + .name = "btwilink", + .id = -1, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, &panda_abe_audio, + &btwilink_device, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 2d24c98f3d45..ae53d71f0ce0 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -1,5 +1,5 @@ /* - * Board support file for Nokia RM-680. + * Board support file for Nokia RM-680/696. * * Copyright (C) 2010 Nokia * @@ -154,3 +154,15 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .timer = &omap3_timer, .restart = omap_prcm_restart, MACHINE_END + +MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") + .atag_offset = 0x100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, + .init_machine = rm680_init, + .timer = &omap3_timer, + .restart = omap_prcm_restart, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 0f65c3b202ac..16aebfb8a7ec 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1102,6 +1102,11 @@ static struct tsc2005_platform_data tsc2005_pdata = { .esd_timeout_ms = 8000, }; +static struct gpio rx51_tsc2005_gpios[] __initdata = { + { RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ" }, + { RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "tsc2005 reset" }, +}; + static void rx51_tsc2005_set_reset(bool enable) { gpio_set_value(RX51_TSC2005_RESET_GPIO, enable); @@ -1111,20 +1116,18 @@ static void __init rx51_init_tsc2005(void) { int r; - r = gpio_request_one(RX51_TSC2005_IRQ_GPIO, GPIOF_IN, "tsc2005 IRQ"); - if (r < 0) { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 IRQ"); - rx51_peripherals_spi_board_info[RX51_SPI_TSC2005].irq = 0; - } + omap_mux_init_gpio(RX51_TSC2005_RESET_GPIO, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(RX51_TSC2005_IRQ_GPIO, OMAP_PIN_INPUT_PULLUP); - r = gpio_request_one(RX51_TSC2005_RESET_GPIO, GPIOF_OUT_INIT_HIGH, - "tsc2005 reset"); - if (r >= 0) { - tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; - } else { - printk(KERN_ERR "unable to get %s GPIO\n", "tsc2005 reset"); + r = gpio_request_array(rx51_tsc2005_gpios, + ARRAY_SIZE(rx51_tsc2005_gpios)); + if (r < 0) { + printk(KERN_ERR "tsc2005 board initialization failed\n"); tsc2005_pdata.esd_timeout_ms = 0; + return; } + + tsc2005_pdata.set_reset = rx51_tsc2005_set_reset; } void __init rx51_peripherals_init(void) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 208eef1c0485..f309bf975202 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -97,9 +97,9 @@ static unsigned long hx4700_pin_config[] __initdata = { /* BTUART */ GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, + GPIO43_BTUART_TXD_LPM_LOW, GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, + GPIO45_BTUART_RTS_LPM_LOW, /* PWM 1 (Backlight) */ GPIO17_PWM1_OUT, @@ -245,6 +245,21 @@ static u16 asic3_gpio_config[] = { ASIC3_GPIOD15_nPIOW, }; +static struct asic3_led asic3_leds[ASIC3_NUM_LEDS] = { + [0] = { + .name = "hx4700:amber", + .default_trigger = "ds2760-battery.0-charging-blink-full-solid", + }, + [1] = { + .name = "hx4700:green", + .default_trigger = "unused", + }, + [2] = { + .name = "hx4700:blue", + .default_trigger = "hx4700-radio", + }, +}; + static struct resource asic3_resources[] = { /* GPIO part */ [0] = { @@ -275,6 +290,7 @@ static struct asic3_platform_data asic3_platform_data = { .gpio_config_num = ARRAY_SIZE(asic3_gpio_config), .irq_base = IRQ_BOARD_START, .gpio_base = HX4700_ASIC3_GPIO_BASE, + .leds = asic3_leds, }; static struct platform_device asic3 = { @@ -705,10 +721,9 @@ static void hx4700_set_vpp(struct platform_device *pdev, int vpp) gpio_set_value(GPIO91_HX4700_FLASH_VPEN, vpp); } -static struct resource strataflash_resource = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_128M - 1, - .flags = IORESOURCE_MEM, +static struct resource strataflash_resource[] = { + [0] = DEFINE_RES_MEM(PXA_CS0_PHYS, SZ_64M), + [1] = DEFINE_RES_MEM(PXA_CS0_PHYS + SZ_64M, SZ_64M), }; static struct physmap_flash_data strataflash_data = { @@ -719,8 +734,8 @@ static struct physmap_flash_data strataflash_data = { static struct platform_device strataflash = { .name = "physmap-flash", .id = -1, - .resource = &strataflash_resource, - .num_resources = 1, + .resource = strataflash_resource, + .num_resources = ARRAY_SIZE(strataflash_resource), .dev = { .platform_data = &strataflash_data, }, @@ -788,17 +803,6 @@ static struct platform_device audio = { /* - * PCMCIA - */ - -static struct platform_device pcmcia = { - .name = "hx4700-pcmcia", - .dev = { - .parent = &asic3.dev, - }, -}; - -/* * Platform devices */ @@ -814,7 +818,6 @@ static struct platform_device *devices[] __initdata = { &power_supply, &strataflash, &audio, - &pcmcia, }; static struct gpio global_gpios[] = { @@ -830,7 +833,6 @@ static struct gpio global_gpios[] = { { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, - { GPIO105_HX4700_nIR_ON, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, }; static void __init hx4700_init(void) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h index ec0f0b0b6744..a65867209aa0 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h @@ -158,7 +158,9 @@ #define GPIO44_BTUART_CTS MFP_CFG_IN(GPIO44, AF1) #define GPIO42_BTUART_RXD MFP_CFG_IN(GPIO42, AF1) #define GPIO45_BTUART_RTS MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH) +#define GPIO45_BTUART_RTS_LPM_LOW MFP_CFG_OUT(GPIO45, AF2, DRIVE_LOW) #define GPIO43_BTUART_TXD MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH) +#define GPIO43_BTUART_TXD_LPM_LOW MFP_CFG_OUT(GPIO43, AF2, DRIVE_LOW) /* STUART */ #define GPIO46_STUART_RXD MFP_CFG_IN(GPIO46, AF2) diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index 326ea3a98725..82c0915729ee 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -304,5 +304,6 @@ config MACH_WLF_CRAGG_6410 select S3C64XX_DEV_SPI0 select SAMSUNG_GPIO_EXTRA128 select I2C + select LEDS_GPIO_REGISTER help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index 32a30f38ba0c..b6a67728cc88 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -11,6 +11,7 @@ #include <linux/export.h> #include <linux/interrupt.h> #include <linux/i2c.h> +#include <linux/spi/spi.h> #include <linux/mfd/wm831x/irq.h> #include <linux/mfd/wm831x/gpio.h> @@ -21,8 +22,25 @@ #include <sound/wm8962.h> #include <sound/wm9081.h> +#include <plat/s3c64xx-spi.h> + #include <mach/crag6410.h> +static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = { + .set_level = gpio_set_value, + .line = S3C64XX_GPC(3), +}; + +static struct spi_board_info wm1253_devs[] = { + [0] = { + .modalias = "wm0010", + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_0, + .controller_data = &wm0010_spi_csinfo, + }, +}; + static struct wm5100_pdata wm5100_pdata = { .ldo_ena = S3C64XX_GPN(7), .irq_flags = IRQF_TRIGGER_HIGH, @@ -159,14 +177,21 @@ static __devinitdata const struct { const char *name; const struct i2c_board_info *i2c_devs; int num_i2c_devs; + const struct spi_board_info *spi_devs; + int num_spi_devs; } gf_mods[] = { { .id = 0x01, .name = "1250-EV1 Springbank" }, { .id = 0x02, .name = "1251-EV1 Jura" }, { .id = 0x03, .name = "1252-EV1 Glenlivet" }, { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x14, .name = "6271-EV1 Lochnagar" }, + { .id = 0x15, .name = "XXXX-EV1 Bells" }, { .id = 0x21, .name = "1275-EV1 Mortlach" }, { .id = 0x25, .name = "1274-EV1 Glencadam" }, - { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x31, .name = "1253-EV1 Tomatin", + .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) }, + { .id = 0x32, .name = "XXXX-EV1 Caol Illa" }, + { .id = 0x33, .name = "XXXX-EV1 Oban" }, { .id = 0x39, .name = "1254-EV1 Dallas Dhu", .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, { .id = 0x3a, .name = "1259-EV1 Tobermory", @@ -198,12 +223,16 @@ static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, if (i < ARRAY_SIZE(gf_mods)) { dev_info(&i2c->dev, "%s revision %d\n", gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { if (!i2c_new_device(i2c->adapter, &(gf_mods[i].i2c_devs[j]))) dev_err(&i2c->dev, "Failed to register dev: %d\n", ret); } + + spi_register_board_info(gf_mods[i].spi_devs, + gf_mods[i].num_spi_devs); } else { dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n", id, rev + 1); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 3b56bd9cb880..e20bf5835365 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -19,7 +19,9 @@ #include <linux/io.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/delay.h> +#include <linux/mmc/host.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/pwm_backlight.h> @@ -299,6 +301,7 @@ static struct platform_device littlemill_device = { }; static struct regulator_consumer_supply wallvdd_consumers[] = { + REGULATOR_SUPPLY("SPKVDD", "1-001a"), REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), REGULATOR_SUPPLY("SPKVDDL", "1-001a"), @@ -575,11 +578,19 @@ static struct s3c2410_platform_i2c i2c0_pdata = { .frequency = 400000, }; +static struct regulator_consumer_supply pvdd_1v2_consumers[] __initdata = { + REGULATOR_SUPPLY("DCVDD", "spi0.0"), + REGULATOR_SUPPLY("AVDD", "spi0.0"), +}; + static struct regulator_init_data pvdd_1v2 __initdata = { .constraints = { .name = "PVDD_1V2", - .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + + .consumer_supplies = pvdd_1v2_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers), }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { @@ -593,6 +604,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), REGULATOR_SUPPLY("AVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD", "spi0.0"), }; static struct regulator_init_data pvdd_1v8 __initdata = { @@ -682,6 +694,7 @@ static void __init crag6410_map_io(void) static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_PERMANENT, + .host_caps = MMC_CAP_POWER_OFF_CARD, }; static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) @@ -697,6 +710,55 @@ static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { .max_width = 4, .cd_type = S3C_SDHCI_CD_INTERNAL, .cfg_gpio = crag6410_cfg_sdhci0, + .host_caps = MMC_CAP_POWER_OFF_CARD, +}; + +static const struct gpio_led gpio_leds[] = { + { + .name = "d13:green:", + .gpio = MMGPIO_GPIO_BASE + 0, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d14:green:", + .gpio = MMGPIO_GPIO_BASE + 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d15:green:", + .gpio = MMGPIO_GPIO_BASE + 2, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d16:green:", + .gpio = MMGPIO_GPIO_BASE + 3, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d17:green:", + .gpio = MMGPIO_GPIO_BASE + 4, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d18:green:", + .gpio = MMGPIO_GPIO_BASE + 5, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d19:green:", + .gpio = MMGPIO_GPIO_BASE + 6, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, + { + .name = "d20:green:", + .gpio = MMGPIO_GPIO_BASE + 7, + .default_state = LEDS_GPIO_DEFSTATE_ON, + }, +}; + +static const struct gpio_led_platform_data gpio_leds_pdata = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), }; static struct s3c_hsotg_plat crag6410_hsotg_pdata; @@ -731,9 +793,12 @@ static void __init crag6410_machine_init(void) i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); samsung_keypad_set_platdata(&crag6410_keypad_data); + s3c64xx_spi0_set_platdata(&s3c64xx_spi0_pdata, 0, 1); platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); + gpio_led_register_device(-1, &gpio_leds_pdata); + regulator_has_full_constraints(); s3c64xx_pm_init(); diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 82525e3831e9..29594fc4fdf4 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -124,6 +124,10 @@ config MACH_SMDKC110 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_MFC select SAMSUNG_DEV_IDE select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 @@ -148,6 +152,11 @@ config MACH_SMDKV210 select S3C_DEV_I2C2 select S3C_DEV_RTC select S3C_DEV_WDT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_JPEG + select S5P_DEV_MFC select SAMSUNG_DEV_ADC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_IDE diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index b9ec0c35379f..09609d50961d 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -340,6 +340,11 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 26), }, { + .name = "jpeg", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 28), + }, { .name = "mfc", .devname = "s5p-mfc", .parent = &clk_pclk_psys.clk, diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 89c34b8f73bf..b7c8a1917ffc 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -90,6 +90,8 @@ #define S5PV210_PA_FIMC1 0xFB300000 #define S5PV210_PA_FIMC2 0xFB400000 +#define S5PV210_PA_JPEG 0xFB600000 + #define S5PV210_PA_SDO 0xF9000000 #define S5PV210_PA_VP 0xF9100000 #define S5PV210_PA_MIXER 0xF9200000 @@ -132,6 +134,8 @@ #define S5P_PA_SYSCON S5PV210_PA_SYSCON #define S5P_PA_TIMER S5PV210_PA_TIMER +#define S5P_PA_JPEG S5PV210_PA_JPEG + #define SAMSUNG_PA_ADC S5PV210_PA_ADC #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON #define SAMSUNG_PA_KEYPAD S5PV210_PA_KEYPAD diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 5e734d025a6a..a9ea64e0da0d 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -616,6 +616,7 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s5pv210_device_iis0, &wm8994_fixed_voltage0, &wm8994_fixed_voltage1, diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index b323983b2c54..dfc29236321c 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -31,6 +31,7 @@ #include <plat/iic.h> #include <plat/pm.h> #include <plat/s5p-time.h> +#include <plat/mfc.h> #include "common.h" @@ -94,6 +95,13 @@ static struct platform_device *smdkc110_devices[] __initdata = { &s3c_device_i2c2, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, }; static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = { @@ -117,6 +125,11 @@ static void __init smdkc110_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void __init smdkc110_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkc110_machine_init(void) { s3c_pm_init(); @@ -145,4 +158,5 @@ MACHINE_START(SMDKC110, "SMDKC110") .init_machine = smdkc110_machine_init, .timer = &s5p_timer, .restart = s5pv210_restart, + .reserve = &smdkc110_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 0933c8e1eb7b..91d4ad8bcc73 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -46,6 +46,7 @@ #include <plat/s5p-time.h> #include <plat/backlight.h> #include <plat/regs-fb-v4.h> +#include <plat/mfc.h> #include "common.h" @@ -223,6 +224,14 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc_md, + &s5p_device_jpeg, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &s5pv210_device_ac97, &s5pv210_device_iis0, &s5pv210_device_spdif, @@ -282,6 +291,11 @@ static void __init smdkv210_map_io(void) s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } +static void __init smdkv210_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkv210_machine_init(void) { s3c_pm_init(); @@ -319,4 +333,5 @@ MACHINE_START(SMDKV210, "SMDKV210") .init_machine = smdkv210_machine_init, .timer = &s5p_timer, .restart = s5pv210_restart, + .reserve = &smdkv210_reserve, MACHINE_END diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 7a95e0bc4aba..e20b419d5983 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -131,11 +131,7 @@ static void __init tegra_dt_init(void) } static const char *tegra20_dt_board_compat[] = { - "compulab,trimslice", - "nvidia,harmony", - "compal,paz00", - "nvidia,seaboard", - "nvidia,ventana", + "nvidia,tegra20", NULL }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index b4124b12a779..96f6c0d030bd 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -69,7 +69,7 @@ static void __init tegra30_dt_init(void) } static const char *tegra30_dt_board_compat[] = { - "nvidia,cardhu", + "nvidia,tegra30", NULL }; diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c index 21d1285731b3..c0298b3f7d63 100644 --- a/arch/arm/mach-tegra/board-harmony-power.c +++ b/arch/arm/mach-tegra/board-harmony-power.c @@ -36,13 +36,14 @@ static struct regulator_consumer_supply tps658621_ldo0_supply[] = { static struct regulator_init_data ldo0_data = { .constraints = { - .min_uV = 1250 * 1000, + .min_uV = 3300 * 1000, .max_uV = 3300 * 1000, .valid_modes_mask = (REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY), .valid_ops_mask = (REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE), + .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(tps658621_ldo0_supply), .consumer_supplies = tps658621_ldo0_supply, diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906b..ad6f865d1f16 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,33 +28,8 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 @@ -66,9 +41,29 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 +#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 +#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 +#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 +#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 +#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 +#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 +#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 +#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 +#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 +#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 +#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 +#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 +#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 + +#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN +#define AMS_DELTA_LATCH2_NGPIO 16 + #ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); +#define ams_delta_latch2_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ + AMS_DELTA_LATCH2_NGPIO, (mask), (value)) #endif #endif /* CONFIG_MACH_AMS_DELTA */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 6ee90495ca4c..cc3f11ba7a99 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); DEBUG_LL_OMAP3(3, nokia_rx51); DEBUG_LL_OMAP3(3, omap3517evm); DEBUG_LL_OMAP3(3, omap3_beagle); |