diff options
Diffstat (limited to 'arch')
184 files changed, 2009 insertions, 2581 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db524e75c4a2..d56d21c0573b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) @@ -1311,7 +1311,7 @@ config HZ config THUMB2_KERNEL bool "Compile the kernel in Thumb-2 mode" - depends on CPU_V7 && EXPERIMENTAL + depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED help @@ -1759,7 +1759,7 @@ comment "At least one emulation must be selected" config FPE_NWFPE bool "NWFPE math emulation" - depends on !AEABI || OABI_COMPAT + depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL ---help--- Say Y to include the NWFPE floating point emulator in the kernel. This is necessary to run most binaries. Linux does not currently diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..4d26f2c52a75 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -70,12 +70,7 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif -ifeq ($(CONFIG_THUMB2_KERNEL),y) -# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode -$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") -else $(obj)/uImage: STARTADDR=$(LOADADDR) -endif $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 8b0de41c3dcb..78b508075161 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time .size _start, . - _start + .align + .type data,#object data: .word initrd_start @ source initrd address .word initrd_phys @ destination initrd address diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 9be21ba648cd..7193884ed8b0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0 * sort out different calling conventions */ .align + .arm @ Always enter in ARM state start: .type start,#function - .rept 8 + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .rept 6 ) + ARM( .rept 8 ) mov r0, r0 .endr @@ -135,6 +139,7 @@ start: .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address + THUMB( .thumb ) 1: mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer @@ -174,7 +179,8 @@ not_angel: ldr sp, [r0, #28] #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address - and r4, pc, #0xf8000000 + mov r4, pc + and r4, r4, #0xf8000000 add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size */ mov r1, #0x1e orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 + mov r2, pc + mov r2, r2, lsr #20 orr r1, r1, r2, lsl #20 add r0, r3, r2, lsl #2 str r1, [r0], #4 diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 772f95f1aecd..e6388dcd8cfa 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) unsigned int shift = (irq % 4) * 8; unsigned int cpu = cpumask_first(mask_val); u32 val; + struct irq_desc *desc; spin_lock(&irq_controller_lock); - irq_desc[irq].node = cpu; + desc = irq_to_desc(irq); + if (desc == NULL) { + spin_unlock(&irq_controller_lock); + return -EINVAL; + } + desc->node = cpu; val = readl(reg) & ~(0xff << shift); val |= 1 << (cpu + shift); writel(val, reg); @@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start) { - unsigned int max_irq, i; + unsigned int gic_irqs, irq_limit, i; u32 cpumask = 1 << smp_processor_id(); if (gic_nr >= MAX_GIC_NR) @@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Find out how many interrupts are supported. - */ - max_irq = readl(base + GIC_DIST_CTR) & 0x1f; - max_irq = (max_irq + 1) * 32; - - /* * The GIC only supports up to 1020 interrupt sources. - * Limit this to either the architected maximum, or the - * platform maximum. */ - if (max_irq > max(1020, NR_IRQS)) - max_irq = max(1020, NR_IRQS); + gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; /* * Set all global interrupts to be level triggered, active low. */ - for (i = 32; i < max_irq; i += 16) + for (i = 32; i < gic_irqs; i += 16) writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ - for (i = 32; i < max_irq; i += 32) + for (i = 32; i < gic_irqs; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); /* + * Limit number of interrupts registered to the platform maximum + */ + irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + if (WARN_ON(irq_limit > NR_IRQS)) + irq_limit = NR_IRQS; + + /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { + for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 1bec96e85196..42ff90b46dfb 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -352,3 +352,4 @@ struct pci_bus * __init it8152_pci_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(nr, &it8152_ops, sys); } +EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig new file mode 100644 index 000000000000..38cb7c985426 --- /dev/null +++ b/arch/arm/configs/at91rm9200_defconfig @@ -0,0 +1,341 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_MACH_ONEARM=y +CONFIG_ARCH_AT91RM9200DK=y +CONFIG_MACH_AT91RM9200EK=y +CONFIG_MACH_CSB337=y +CONFIG_MACH_CSB637=y +CONFIG_MACH_CARMEVA=y +CONFIG_MACH_ATEB9200=y +CONFIG_MACH_KB9200=y +CONFIG_MACH_PICOTUX2XX=y +CONFIG_MACH_KAFA=y +CONFIG_MACH_ECBAT91=y +CONFIG_MACH_YL9200=y +CONFIG_MACH_CPUAT91=y +CONFIG_MACH_ECO920=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +# CONFIG_ARM_THUMB is not set +CONFIG_PCCARD=y +CONFIG_AT91_CF=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_TUN=m +CONFIG_PHYLIB=y +CONFIG_DAVICOM_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=32 +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_GPIO_SYSFS=y +CONFIG_HWMON=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_S1D13XXX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_MCT_U232=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_REISERFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_SMB_FS=m +CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig deleted file mode 100644 index 4438e64f3bfb..000000000000 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_ECO920=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig deleted file mode 100644 index ccd517c64bc7..000000000000 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_AT91RM9200EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_S1D13XXX=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig deleted file mode 100644 index 1b0e9a1689bb..000000000000 --- a/arch/arm/configs/ateb9200_defconfig +++ /dev/null @@ -1,131 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_ATEB9200=y -CONFIG_PCCARD=m -CONFIG_AT91_CF=m -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRC16=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig deleted file mode 100644 index ac64dbd8a49c..000000000000 --- a/arch/arm/configs/carmeva_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_CARMEVA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_DNOTIFY is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig deleted file mode 100644 index 022aeb55b676..000000000000 --- a/arch/arm/configs/cpuat91_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CPUAT91=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig deleted file mode 100644 index a24c448840c4..000000000000 --- a/arch/arm/configs/csb337_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB337=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -# CONFIG_RTC_INTF_SYSFS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig deleted file mode 100644 index 98552adac5fb..000000000000 --- a/arch/arm/configs/csb637_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB637=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig deleted file mode 100644 index 6bb6abdcea8c..000000000000 --- a/arch/arm/configs/ecbat91_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ECBAT91=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_MAC80211=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig deleted file mode 100644 index 896dbe00dc6e..000000000000 --- a/arch/arm/configs/kafa_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KAFA=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig deleted file mode 100644 index 9f906a85f5c2..000000000000 --- a/arch/arm/configs/kb9202_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KB9200=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x10000000 -CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig deleted file mode 100644 index 1579857aeeaa..000000000000 --- a/arch/arm/configs/onearm_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ONEARM=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig deleted file mode 100644 index 4c9afa478d57..000000000000 --- a/arch/arm/configs/picotux200_defconfig +++ /dev/null @@ -1,242 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_PICOTUX2XX=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=m -CONFIG_HID=m -CONFIG_USB=m -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_AT91RM9200=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_AMIGA_PARTITION=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig deleted file mode 100644 index 30c537f61089..000000000000 --- a/arch/arm/configs/yl9200_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_YL9200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=3 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SLUB_DEBUG_ON=y -CONFIG_DEBUG_KOBJECT=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index c09e3573c5de..bb96a7d4bbf5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - ldr r7, =1f @ it's 20 bits + ldr r7, 1f @ it's 20 bits swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} 1: .word __ARM_NR_cmpxchg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index dd6b369ac69c..6bd82d25683c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -85,9 +85,11 @@ ENTRY(stext) mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_a @ yes, error 'a' bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -262,6 +264,7 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg + .align __enable_mmu_loc: .long . .long __enable_mmu @@ -282,6 +285,7 @@ ENTRY(secondary_startup) bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p /* @@ -308,6 +312,8 @@ ENTRY(__secondary_switched) b secondary_start_kernel ENDPROC(__secondary_switched) + .align + .type __secondary_data, %object __secondary_data: .long . @@ -413,6 +419,7 @@ __fixup_smp_on_up: mov pc, lr ENDPROC(__fixup_smp) + .align 1: .word . .word __smpalt_begin .word __smpalt_end diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index fd26f8d65151..9cf4cbf8f95b 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -59,6 +59,8 @@ relocate_new_kernel: ldr r2,kexec_boot_atags mov pc,lr + .align + .globl kexec_start_address kexec_start_address: .long 0x0 diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795f..d13add71f72a 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o @@ -65,7 +65,7 @@ obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o -obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o +obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o # AT91SAM9260/AT91SAM9G20 board-specific support obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd7..7b539228e0ef 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fbf..8a3fc84847c1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a0..d2e1f4ec1fcc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index bba5a560e02b..feb65787c30b 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -31,6 +31,7 @@ #include <mach/board.h> #include <mach/at91sam9_smc.h> +#include <mach/stamp9g20.h> #include "sam9_smc.h" #include "generic.h" @@ -38,11 +39,7 @@ static void __init pcontrol_g20_map_io(void) { - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */ - at91_register_uart(0, 0, 0); + stamp9g20_map_io(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -54,9 +51,6 @@ static void __init pcontrol_g20_map_io(void) /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */ at91_register_uart(AT91SAM9260_ID_US4, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } @@ -66,38 +60,6 @@ static void __init init_irq(void) } -/* - * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB - */ -static struct atmel_nand_data __initdata nand_data = { - .ale = 21, - .cle = 22, - .rdy_pin = AT91_PIN_PC13, - .enable_pin = AT91_PIN_PC14, -}; - -/* - * Bus timings; unit = 7.57ns - */ -static struct sam9_smc_config __initdata nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 2, - .ncs_write_setup = 0, - .nwe_setup = 2, - - .ncs_read_pulse = 4, - .nrd_pulse = 4, - .ncs_write_pulse = 4, - .nwe_pulse = 4, - - .read_cycle = 7, - .write_cycle = 7, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE - | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8, - .tdf_cycles = 3, -}; - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -138,14 +100,6 @@ static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .tdf_cycles = 1, } }; -static void __init add_device_nand(void) -{ - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &nand_smc_config); - at91_add_device_nand(&nand_data); -} - - static void __init add_device_pcontrol(void) { /* configure chip-select 4 (IO compatible to 8051 X4 ) */ @@ -156,23 +110,6 @@ static void __init add_device_pcontrol(void) /* - * MCI (SD/MMC) - * det_pin, wp_pin and vcc_pin are not connected - */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) -static struct mci_platform_data __initdata mmc_data = { - .slot[0] = { - .bus_width = 4, - }, -}; -#else -static struct at91_mmc_data __initdata mmc_data = { - .wire4 = 1, -}; -#endif - - -/* * USB Host port */ static struct at91_usbh_data __initdata usbh_data = { @@ -265,42 +202,13 @@ static struct spi_board_info pcontrol_g20_spi_devices[] = { }; -/* - * Dallas 1-Wire DS2431 - */ -static struct w1_gpio_platform_data w1_gpio_pdata = { - .pin = AT91_PIN_PA29, - .is_open_drain = 1, -}; - -static struct platform_device w1_device = { - .name = "w1-gpio", - .id = -1, - .dev.platform_data = &w1_gpio_pdata, -}; - -static void add_wire1(void) -{ - at91_set_GPIO_periph(w1_gpio_pdata.pin, 1); - at91_set_multi_drive(w1_gpio_pdata.pin, 1); - platform_device_register(&w1_device); -} - - static void __init pcontrol_g20_board_init(void) { - at91_add_device_serial(); - add_device_nand(); -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) - at91_add_device_mci(0, &mmc_data); -#else - at91_add_device_mmc(0, &mmc_data); -#endif + stamp9g20_board_init(); at91_add_device_usbh(&usbh_data); at91_add_device_eth(&macb_data); at91_add_device_i2c(pcontrol_g20_i2c_devices, ARRAY_SIZE(pcontrol_g20_i2c_devices)); - add_wire1(); add_device_pcontrol(); at91_add_device_spi(pcontrol_g20_spi_devices, ARRAY_SIZE(pcontrol_g20_spi_devices)); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592d..55dad3a46547 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) @@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -135,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c index e14f0e165680..4c1047c8200d 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-dk.c + * linux/arch/arm/mach-at91/board-rm9200dk.c * * Copyright (C) 2005 SAN People * @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 56e92c4bbc2a..9df1be8818c0 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-ek.c + * linux/arch/arm/mach-at91/board-rm9200ek.c * * Copyright (C) 2005 SAN People * @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 5206eef4a67e..f8902b118960 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -static void __init portuxg20_map_io(void) +void __init stamp9g20_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -40,6 +40,24 @@ static void __init portuxg20_map_io(void) /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); +} + +static void __init stamp9g20evb_map_io(void) +{ + stamp9g20_map_io(); + + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR + | ATMEL_UART_DCD | ATMEL_UART_RI); +} + +static void __init portuxg20_map_io(void) +{ + stamp9g20_map_io(); + /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR @@ -56,26 +74,6 @@ static void __init portuxg20_map_io(void) /* USART5 on ttyS6. (Rx, Tx only) */ at91_register_uart(AT91SAM9260_ID_US5, 6, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init stamp9g20_map_io(void) -{ - /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); - - /* DGBU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ - at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS - | ATMEL_UART_DTR | ATMEL_UART_DSR - | ATMEL_UART_DCD | ATMEL_UART_RI); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); } static void __init init_irq(void) @@ -156,7 +154,7 @@ static struct at91_udc_data __initdata portuxg20_udc_data = { .pullup_pin = 0, /* pull-up driven by UDC */ }; -static struct at91_udc_data __initdata stamp9g20_udc_data = { +static struct at91_udc_data __initdata stamp9g20evb_udc_data = { .vbus_pin = AT91_PIN_PA22, .pullup_pin = 0, /* pull-up driven by UDC */ }; @@ -190,7 +188,7 @@ static struct gpio_led portuxg20_leds[] = { } }; -static struct gpio_led stamp9g20_leds[] = { +static struct gpio_led stamp9g20evb_leds[] = { { .name = "D8", .gpio = AT91_PIN_PB18, @@ -250,7 +248,7 @@ void add_w1(void) } -static void __init generic_board_init(void) +void __init stamp9g20_board_init(void) { /* Serial */ at91_add_device_serial(); @@ -262,34 +260,40 @@ static void __init generic_board_init(void) #else at91_add_device_mmc(0, &mmc_data); #endif - /* USB Host */ - at91_add_device_usbh(&usbh_data); - /* Ethernet */ - at91_add_device_eth(&macb_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); /* W1 */ add_w1(); } static void __init portuxg20_board_init(void) { - generic_board_init(); - /* SPI */ - at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); + stamp9g20_board_init(); + /* USB Host */ + at91_add_device_usbh(&usbh_data); /* USB Device */ at91_add_device_udc(&portuxg20_udc_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); + /* SPI */ + at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices)); /* LEDs */ at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds)); } -static void __init stamp9g20_board_init(void) +static void __init stamp9g20evb_board_init(void) { - generic_board_init(); + stamp9g20_board_init(); + /* USB Host */ + at91_add_device_usbh(&usbh_data); /* USB Device */ - at91_add_device_udc(&stamp9g20_udc_data); + at91_add_device_udc(&stamp9g20evb_udc_data); + /* Ethernet */ + at91_add_device_eth(&macb_data); + /* I2C */ + at91_add_device_i2c(NULL, 0); /* LEDs */ - at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds)); + at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds)); } MACHINE_START(PORTUXG20, "taskit PortuxG20") @@ -305,7 +309,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20_map_io, + .map_io = stamp9g20evb_map_io, .init_irq = init_irq, - .init_machine = stamp9g20_board_init, + .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f7..e0f0080eb639 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include <video/s1d13xxxfb.h> diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 7525cee3983f..9113da6845f1 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -658,7 +658,7 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock) /* Now set uhpck values */ uhpck.parent = &utmi_clk; uhpck.pmc_mask = AT91SAM926x_PMC_UHP; - uhpck.rate_hz = utmi_clk.parent->rate_hz; + uhpck.rate_hz = utmi_clk.rate_hz; uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8); } diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 57f8ee154943..27ac6f550fe3 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -74,6 +74,8 @@ #define AT91_MCI_TRTYP_BLOCK (0 << 19) #define AT91_MCI_TRTYP_MULTIPLE (1 << 19) #define AT91_MCI_TRTYP_STREAM (2 << 19) +#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19) +#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19) #define AT91_MCI_BLKR 0x18 /* Block Register */ #define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 58528aa9c8a8..2b499eb343a1 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -137,13 +137,7 @@ extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_de extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins); extern void __init at91_set_serial_console(unsigned portnr); -struct at91_uart_config { - unsigned short console_tty; /* tty number of serial console */ - unsigned short nr_tty; /* number of serial tty's */ - short tty_map[]; /* map UART to tty number */ -}; extern struct platform_device *atmel_default_console_device; -extern void __init __deprecated at91_init_serial(struct at91_uart_config *config); struct atmel_uart_data { short use_dma_tx; /* use transmit DMA? */ diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h new file mode 100644 index 000000000000..6120f9c46d59 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -0,0 +1,7 @@ +#ifndef __MACH_STAMP9G20_H +#define __MACH_STAMP9G20_H + +void stamp9g20_map_io(void); +void stamp9g20_board_init(void); + +#endif diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 38088c36936c..78defd71a829 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -369,7 +369,7 @@ static int __init cns3xxx_pcie_init(void) { int i; - hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, + hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, "imprecise external abort"); for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) { diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 24498a932ba6..a54b3db80366 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -513,4 +513,4 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) EXPORT_SYMBOL(ixp4xx_pci_read); EXPORT_SYMBOL(ixp4xx_pci_write); - +EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index daf3993349f8..2e3dd08ccc3f 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -126,7 +126,6 @@ static APBC_CLK(twsi3, MMP2_TWSI3, 0, 26000000); static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000); static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000); static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000); -static APBC_CLK(rtc, MMP2_RTC, 0, 32768); static APMU_CLK(nand, NAND, 0xbf, 100000000); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 86c9b2102952..9db9203667df 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -216,7 +216,7 @@ static struct omap2_hsmmc_info mmc[] __initdata = { { .name = "wl1271", .mmc = 3, - .caps = MMC_CAP_4_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, .gpio_wp = -EINVAL, .gpio_cd = -EINVAL, .nonremovable = true, diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 40562ddd3ee4..a1939b1e6f82 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -297,7 +297,7 @@ static int __init _omap2_init_reprogram_sdrc(void) return 0; dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck"); - if (!dpll3_m2_ck) + if (IS_ERR(dpll3_m2_ck)) return -EINVAL; rate = clk_get_rate(dpll3_m2_ck); diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 5e81517a7af2..a8afb610c7d8 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -161,6 +161,23 @@ void omap2_pm_dump(int mode, int resume, unsigned int us) printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); } +void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) +{ + u32 tick_rate, cycles; + + if (!seconds && !milliseconds) + return; + + tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); + cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; + omap_dm_timer_stop(gptimer_wakeup); + omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); + + pr_info("PM: Resume timer in %u.%03u secs" + " (%d ticks at %d ticks/sec.)\n", + seconds, milliseconds, cycles, tick_rate); +} + #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> #include <linux/seq_file.h> @@ -354,23 +371,6 @@ void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) pwrdm->timer = t; } -void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} - static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user) { struct seq_file *s = (struct seq_file *)user; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index a40457d81927..aaeea49b9bdd 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -30,6 +30,7 @@ #include <linux/irq.h> #include <linux/time.h> #include <linux/gpio.h> +#include <linux/console.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -52,6 +53,19 @@ #include <plat/powerdomain.h> #include <plat/clockdomain.h> +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state = PM_SUSPEND_ON; +static inline bool is_suspending(void) +{ + return (suspend_state != PM_SUSPEND_ON); +} +#else +static inline bool is_suspending(void) +{ + return false; +} +#endif + static void (*omap2_sram_idle)(void); static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); @@ -118,6 +132,11 @@ static void omap2_enter_full_retention(void) if (omap_irq_pending()) goto no_sleep; + /* Block console output in case it is on one of the OMAP UARTs */ + if (!is_suspending()) + if (try_acquire_console_sem()) + goto no_sleep; + omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); omap_uart_prepare_idle(2); @@ -131,6 +150,9 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(1); omap_uart_resume_idle(0); + if (!is_suspending()) + release_console_sem(); + no_sleep: if (omap2_pm_debug) { unsigned long long tmp; @@ -277,6 +299,12 @@ out: local_irq_enable(); } +static int omap2_pm_begin(suspend_state_t state) +{ + suspend_state = state; + return 0; +} + static int omap2_pm_prepare(void) { /* We cannot sleep in idle until we have resumed */ @@ -326,10 +354,17 @@ static void omap2_pm_finish(void) enable_hlt(); } +static void omap2_pm_end(void) +{ + suspend_state = PM_SUSPEND_ON; +} + static struct platform_suspend_ops omap_pm_ops = { + .begin = omap2_pm_begin, .prepare = omap2_pm_prepare, .enter = omap2_pm_enter, .finish = omap2_pm_finish, + .end = omap2_pm_end, .valid = suspend_valid_only_mem, }; diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 75c0cd13ad8e..648b8c50d024 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -28,6 +28,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/console.h> #include <plat/sram.h> #include <plat/clockdomain.h> @@ -49,6 +50,19 @@ #include "sdrc.h" #include "control.h" +#ifdef CONFIG_SUSPEND +static suspend_state_t suspend_state = PM_SUSPEND_ON; +static inline bool is_suspending(void) +{ + return (suspend_state != PM_SUSPEND_ON); +} +#else +static inline bool is_suspending(void) +{ + return false; +} +#endif + /* Scratchpad offsets */ #define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 #define OMAP343X_TABLE_VALUE_OFFSET 0xc0 @@ -385,6 +399,13 @@ void omap_sram_idle(void) omap3_enable_io_chain(); } + /* Block console output in case it is on one of the OMAP UARTs */ + if (!is_suspending()) + if (per_next_state < PWRDM_POWER_ON || + core_next_state < PWRDM_POWER_ON) + if (try_acquire_console_sem()) + goto console_still_active; + /* PER */ if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); @@ -463,6 +484,10 @@ void omap_sram_idle(void) omap_uart_resume_idle(3); } + if (!is_suspending()) + release_console_sem(); + +console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ if (omap3_has_io_wakeup() && (per_next_state < PWRDM_POWER_ON || @@ -504,8 +529,6 @@ out: } #ifdef CONFIG_SUSPEND -static suspend_state_t suspend_state; - static int omap3_pm_prepare(void) { disable_hlt(); diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index 298a22a754e2..f81acee4738d 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -243,13 +243,14 @@ #define OMAP24XX_EN_GPT1_MASK (1 << 0) /* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */ -#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2) -#define OMAP24XX_ST_GPIOS_MASK 2 -#define OMAP24XX_ST_GPT1_SHIFT (1 << 0) -#define OMAP24XX_ST_GPT1_MASK 0 +#define OMAP24XX_ST_GPIOS_SHIFT 2 +#define OMAP24XX_ST_GPIOS_MASK (1 << 2) +#define OMAP24XX_ST_GPT1_SHIFT 0 +#define OMAP24XX_ST_GPT1_MASK (1 << 0) /* CM_IDLEST_MDM and PM_WKST_MDM shared bits */ -#define OMAP2430_ST_MDM_SHIFT (1 << 0) +#define OMAP2430_ST_MDM_SHIFT 0 +#define OMAP2430_ST_MDM_MASK (1 << 0) /* 3430 register bits shared between CM & PRM registers */ diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index becf0e38ef7e..d17960a1be25 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/serial_8250.h> #include <linux/pm_runtime.h> +#include <linux/console.h> #ifdef CONFIG_SERIAL_OMAP #include <plat/omap-serial.h> @@ -406,7 +407,7 @@ void omap_uart_resume_idle(int num) struct omap_uart_state *uart; list_for_each_entry(uart, &uart_list, node) { - if (num == uart->num) { + if (num == uart->num && uart->can_sleep) { omap_uart_enable_clocks(uart); /* Check for IO pad wakeup */ @@ -807,6 +808,8 @@ void __init omap_serial_init_port(int port) oh->dev_attr = uart; + acquire_console_sem(); /* in case the earlycon is on the UART */ + /* * Because of early UART probing, UART did not get idled * on init. Now that omap_device is ready, ensure full idle @@ -831,6 +834,8 @@ void __init omap_serial_init_port(int port) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; + release_console_sem(); + if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { device_init_wakeup(&od->pdev.dev, true); diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index d2060a1d1d68..e5c9932b7588 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -241,7 +241,8 @@ static inline void palmtx_keys_init(void) {} /****************************************************************************** * NAND Flash ******************************************************************************/ -#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE) +#if defined(CONFIG_MTD_NAND_PLATFORM) || \ + defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { diff --git a/arch/arm/mach-realview/headsmp.S b/arch/arm/mach-realview/headsmp.S index 4075473cf68a..b34be4554d40 100644 --- a/arch/arm/mach-realview/headsmp.S +++ b/arch/arm/mach-realview/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index cef6a65637bd..6983cb4d4cae 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -16,7 +16,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ - !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ + !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 @@ -28,9 +28,16 @@ config S3C2412_DMA config S3C2412_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2412 power management +config S3C2412_PM_SLEEP + bool + help + Internal config node to apply sleep for S3C2412 power management. + Can be selected by another SoCs with similar sleep procedure. + # Note, the S3C2412 IOtiming support is in plat-s3c24xx config S3C2412_CPUFREQ diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 530ec46cbaea..6c48a91ea39e 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -14,7 +14,8 @@ obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o -obj-$(CONFIG_S3C2412_PM) += pm.o sleep.o +obj-$(CONFIG_S3C2412_PM) += pm.o +obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o # Machine support diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 87b9c9f003bd..df8d14974c90 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -27,6 +27,7 @@ config S3C2416_DMA config S3C2416_PM bool + select S3C2412_PM_SLEEP help Internal config node to apply S3C2416 power management @@ -35,9 +36,12 @@ menu "S3C2416 Machines" config MACH_SMDK2416 bool "SMDK2416" select CPU_S3C2416 + select MACH_SMDK select S3C_DEV_FB select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 + select S3C_DEV_NAND + select S3C_DEV_USB_HOST select S3C2416_PM if PM help Say Y here if you are using an SMDK2416 diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index ff024a6c0f85..a0cb2581894f 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -18,6 +18,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool select CPU_ARM920T + select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK select S3C2410_GPIO select S3C2410_PM if PM @@ -178,6 +179,9 @@ config MACH_MINI2440 bool "MINI2440 development board" select CPU_S3C2440 select EEPROM_AT24 + select NEW_LEDS + select LEDS_CLASS + select LEDS_TRIGGER select LEDS_TRIGGER_BACKLIGHT select S3C_DEV_NAND select S3C_DEV_USB_HOST diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index d50f3ae6173d..f7663f731ea0 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -46,9 +46,6 @@ int __init s3c2440_init(void) { printk("S3C2440: Initialising architecture\n"); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; - /* change irq for watchdog */ s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT; @@ -58,3 +55,11 @@ int __init s3c2440_init(void) return sysdev_register(&s3c2440_sysdev); } + +void __init s3c2440_map_io(void) +{ + s3c244x_map_io(); + + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; +} diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 188ad1e57dc0..ecf813546554 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/mutex.h> +#include <linux/gpio.h> #include <linux/clk.h> #include <linux/io.h> @@ -43,6 +44,11 @@ #include <plat/clock.h> #include <plat/cpu.h> +#include <plat/s3c244x.h> + +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> /* S3C2442 extended clock support */ @@ -163,3 +169,11 @@ int __init s3c2442_init(void) return sysdev_register(&s3c2442_sysdev); } + +void __init s3c2442_map_io(void) +{ + s3c244x_map_io(); + + s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down; + s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down; +} diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 4fef723126fa..31babec90cec 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -5,6 +5,7 @@ config CPU_S3C2443 bool depends on ARCH_S3C2410 + select CPU_ARM920T select S3C2443_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 28677caf3613..461aa035afc0 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -378,6 +378,12 @@ static struct max8998_regulator_data aquila_regulators[] = { static struct max8998_platform_data aquila_max8998_pdata = { .num_regulators = ARRAY_SIZE(aquila_regulators), .regulators = aquila_regulators, + .buck1_set1 = S5PV210_GPH0(3), + .buck1_set2 = S5PV210_GPH0(4), + .buck2_set3 = S5PV210_GPH0(5), + .buck1_max_voltage1 = 1200000, + .buck1_max_voltage2 = 1200000, + .buck2_max_voltage = 1200000, }; #endif diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index b1dcf964a768..e22d5112fd44 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -518,6 +518,12 @@ static struct max8998_regulator_data goni_regulators[] = { static struct max8998_platform_data goni_max8998_pdata = { .num_regulators = ARRAY_SIZE(goni_regulators), .regulators = goni_regulators, + .buck1_set1 = S5PV210_GPH0(3), + .buck1_set2 = S5PV210_GPH0(4), + .buck2_set3 = S5PV210_GPH0(5), + .buck1_max_voltage1 = 1200000, + .buck1_max_voltage2 = 1200000, + .buck2_max_voltage = 1200000, }; #endif diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S index a285d13c7416..f428c4db2b60 100644 --- a/arch/arm/mach-shmobile/include/mach/entry-macro.S +++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S @@ -1,4 +1,5 @@ /* + * Copyright (C) 2010 Magnus Damm * Copyright (C) 2008 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify @@ -14,24 +15,45 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#include <mach/hardware.h> #include <mach/irqs.h> +#define INTCA_BASE 0xe6980000 +#define INTFLGA_OFFS 0x00000018 /* accept pending interrupt */ +#define INTEVTA_OFFS 0x00000020 /* vector number of accepted interrupt */ +#define INTLVLA_OFFS 0x00000030 /* priority level of accepted interrupt */ +#define INTLVLB_OFFS 0x00000034 /* previous priority level */ + .macro disable_fiq .endm .macro get_irqnr_preamble, base, tmp - ldr \base, =INTFLGA + ldr \base, =INTCA_BASE .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base] + /* The single INTFLGA read access below results in the following: + * + * 1. INTLVLB is updated with old priority value from INTLVLA + * 2. Highest priority interrupt is accepted + * 3. INTLVLA is updated to contain priority of accepted interrupt + * 4. Accepted interrupt vector is stored in INTFLGA and INTEVTA + */ + ldr \irqnr, [\base, #INTFLGA_OFFS] + + /* Restore INTLVLA with the value saved in INTLVLB. + * This is required to support interrupt priorities properly. + */ + ldrb \tmp, [\base, #INTLVLB_OFFS] + strb \tmp, [\base, #INTLVLA_OFFS] + + /* Handle invalid vector number case */ cmp \irqnr, #0 beq 1000f - /* intevt to irq number */ + + /* Convert vector to irq number, same as the evt2irq() macro */ lsr \irqnr, \irqnr, #0x5 subs \irqnr, \irqnr, #16 diff --git a/arch/arm/mach-shmobile/include/mach/vmalloc.h b/arch/arm/mach-shmobile/include/mach/vmalloc.h index 4aecf6e3a859..2b8fd8b942fe 100644 --- a/arch/arm/mach-shmobile/include/mach/vmalloc.h +++ b/arch/arm/mach-shmobile/include/mach/vmalloc.h @@ -2,6 +2,6 @@ #define __ASM_MACH_VMALLOC_H /* Vmalloc at ... - 0xe5ffffff */ -#define VMALLOC_END 0xe6000000 +#define VMALLOC_END 0xe6000000UL #endif /* __ASM_MACH_VMALLOC_H */ diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S index 8ea3bffb4e00..a0e7c12868bd 100644 --- a/arch/arm/mach-tegra/include/mach/debug-macro.S +++ b/arch/arm/mach-tegra/include/mach/debug-macro.S @@ -21,8 +21,8 @@ #include <mach/io.h> .macro addruart, rp, rv - ldreq \rp, =IO_APB_PHYS @ physical - ldrne \rv, =IO_APB_VIRT @ virtual + ldr \rp, =IO_APB_PHYS @ physical + ldr \rv, =IO_APB_VIRT @ virtual #if defined(CONFIG_TEGRA_DEBUG_UART_NONE) #error "A debug UART must be selected in the kernel config to use DEBUG_LL" #elif defined(CONFIG_TEGRA_DEBUG_UARTA) diff --git a/arch/arm/mach-vexpress/headsmp.S b/arch/arm/mach-vexpress/headsmp.S index 8a78ff68e1ee..7a3f0632947c 100644 --- a/arch/arm/mach-vexpress/headsmp.S +++ b/arch/arm/mach-vexpress/headsmp.S @@ -35,5 +35,6 @@ pen: ldr r7, [r6] */ b secondary_startup + .align 1: .long . .long pen_release diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 99fa688dfadd..c96fa1b3f49f 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -203,6 +203,10 @@ ENTRY(v6_flush_kern_dcache_area) * - end - virtual end address of region */ v6_dma_inv_range: +#ifdef CONFIG_DMA_CACHE_RWFO + ldrb r2, [r0] @ read for ownership + strb r2, [r0] @ write for ownership +#endif tst r0, #D_CACHE_LINE_SIZE - 1 bic r0, r0, #D_CACHE_LINE_SIZE - 1 #ifdef HARVARD_CACHE @@ -211,6 +215,10 @@ v6_dma_inv_range: mcrne p15, 0, r0, c7, c11, 1 @ clean unified line #endif tst r1, #D_CACHE_LINE_SIZE - 1 +#ifdef CONFIG_DMA_CACHE_RWFO + ldrneb r2, [r1, #-1] @ read for ownership + strneb r2, [r1, #-1] @ write for ownership +#endif bic r1, r1, #D_CACHE_LINE_SIZE - 1 #ifdef HARVARD_CACHE mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line @@ -218,10 +226,6 @@ v6_dma_inv_range: mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line #endif 1: -#ifdef CONFIG_DMA_CACHE_RWFO - ldr r2, [r0] @ read for ownership - str r2, [r0] @ write for ownership -#endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c6, 1 @ invalidate D line #else @@ -229,6 +233,10 @@ v6_dma_inv_range: #endif add r0, r0, #D_CACHE_LINE_SIZE cmp r0, r1 +#ifdef CONFIG_DMA_CACHE_RWFO + ldrlo r2, [r0] @ read for ownership + strlo r2, [r0] @ write for ownership +#endif blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer @@ -263,12 +271,12 @@ v6_dma_clean_range: * - end - virtual end address of region */ ENTRY(v6_dma_flush_range) - bic r0, r0, #D_CACHE_LINE_SIZE - 1 -1: #ifdef CONFIG_DMA_CACHE_RWFO - ldr r2, [r0] @ read for ownership - str r2, [r0] @ write for ownership + ldrb r2, [r0] @ read for ownership + strb r2, [r0] @ write for ownership #endif + bic r0, r0, #D_CACHE_LINE_SIZE - 1 +1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line #else @@ -276,6 +284,10 @@ ENTRY(v6_dma_flush_range) #endif add r0, r0, #D_CACHE_LINE_SIZE cmp r0, r1 +#ifdef CONFIG_DMA_CACHE_RWFO + ldrlob r2, [r0] @ read for ownership + strlob r2, [r0] @ write for ownership +#endif blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index a3ebf7a4f49b..6136e68ce953 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -173,15 +173,22 @@ ENTRY(v7_coherent_user_range) UNWIND(.fnstart ) dcache_line_size r2, r3 sub r3, r2, #1 - bic r0, r0, r3 + bic r12, r0, r3 1: - USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification + USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification + add r12, r12, r2 + cmp r12, r1 + blo 1b dsb - USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line - add r0, r0, r2 + icache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 2: - cmp r0, r1 - blo 1b + USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line + add r12, r12, r2 + cmp r12, r1 + blo 2b +3: mov r0, #0 ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB @@ -194,10 +201,10 @@ ENTRY(v7_coherent_user_range) * isn't mapped, just try the next page. */ 9001: - mov r0, r0, lsr #12 - mov r0, r0, lsl #12 - add r0, r0, #4096 - b 2b + mov r12, r12, lsr #12 + mov r12, r12, lsl #12 + add r12, r12, #4096 + b 3b UNWIND(.fnend ) ENDPROC(v7_coherent_kern_range) ENDPROC(v7_coherent_user_range) diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 7d63beaf9745..b795afd0a2c6 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -61,17 +61,27 @@ .endm /* - * cache_line_size - get the cache line size from the CSIDR register - * (available on ARMv7+). It assumes that the CSSR register was configured - * to access the L1 data cache CSIDR. + * dcache_line_size - get the minimum D-cache line size from the CTR register + * on ARMv7. */ .macro dcache_line_size, reg, tmp - mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR - and \tmp, \tmp, #7 @ cache line size encoding - mov \reg, #16 @ size offset + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr + lsr \tmp, \tmp, #16 + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word mov \reg, \reg, lsl \tmp @ actual cache line size .endm +/* + * icache_line_size - get the minimum I-cache line size from the CTR register + * on ARMv7. + */ + .macro icache_line_size, reg, tmp + mrc p15, 0, \tmp, c0, c0, 1 @ read ctr + and \tmp, \tmp, #0xf @ cache line size encoding + mov \reg, #4 @ bytes per word + mov \reg, \reg, lsl \tmp @ actual cache line size + .endm /* * Sanity check the PTE configuration for the code below - which makes diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 53cbe2225153..9b9ff5d949fd 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -381,7 +381,7 @@ __v7_ca9mp_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_ca9mp_setup + W(b) __v7_ca9mp_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS @@ -413,7 +413,7 @@ __v7_proc_info: PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __v7_setup + W(b) __v7_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 85d3e55ca4a9..558cdfaf76b6 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -18,6 +18,7 @@ #include <linux/time.h> #include <linux/init.h> #include <linux/timex.h> +#include <linux/sched.h> #include <linux/io.h> #include <linux/clocksource.h> #include <linux/clockchips.h> @@ -36,7 +37,7 @@ /* * IOP clocksource (free-running timer 1). */ -static cycle_t iop_clocksource_read(struct clocksource *unused) +static cycle_t notrace iop_clocksource_read(struct clocksource *unused) { return 0xffffffffu - read_tcr1(); } diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 155fe43a672b..8722a136f3a5 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/err.h> #include <plat/common.h> #include <plat/board.h> @@ -164,7 +165,7 @@ static int __init omap_init_clocksource_32k(void) return -ENODEV; sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); - if (sync_32k_ick) + if (!IS_ERR(sync_32k_ick)) clk_enable(sync_32k_ick); clocksource_32k.mult = clocksource_hz2mult(32768, diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index e2c8eebe6b3a..74dac419d328 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -166,7 +166,7 @@ static void __init omap_detect_sram(void) cpu_is_omap1710()) omap_sram_size = 0x4000; /* 16K */ else if (cpu_is_omap1611()) - omap_sram_size = 0x3e800; /* 250K */ + omap_sram_size = SZ_256K; else { printk(KERN_ERR "Could not detect SRAM size\n"); omap_sram_size = 0x4000; diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5a27b1b538f2..eb105e61c746 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -8,7 +8,7 @@ config PLAT_S3C24XX default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB - select S3C_DEVICE_NAND + select S3C_DEV_NAND select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 76d0858c3cbb..4a10c0f684b2 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -88,7 +88,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440000, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2440_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, @@ -97,7 +97,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440001, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2440_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2440_init, @@ -106,7 +106,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440aaa, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2442_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, @@ -115,7 +115,7 @@ static struct cpu_table cpu_ids[] __initdata = { { .idcode = 0x32440aab, .idmask = 0xffffffff, - .map_io = s3c244x_map_io, + .map_io = s3c2442_map_io, .init_clocks = s3c244x_init_clocks, .init_uarts = s3c244x_init_uarts, .init = s3c2442_init, diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 24c6f5a30596..243b6411050d 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -82,8 +82,6 @@ static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { .set_config = s3c_gpio_setcfg_s3c24xx, .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_1up, - .get_pull = s3c_gpio_getpull_1up, }; struct s3c_gpio_chip s3c24xx_gpios[] = { diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h index 307248d1ccbb..89e8d0a25f87 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c244x.h @@ -21,17 +21,22 @@ extern void s3c244x_init_clocks(int xtal); #else #define s3c244x_init_clocks NULL #define s3c244x_init_uarts NULL -#define s3c244x_map_io NULL #endif #ifdef CONFIG_CPU_S3C2440 extern int s3c2440_init(void); + +extern void s3c2440_map_io(void); #else #define s3c2440_init NULL +#define s3c2440_map_io NULL #endif #ifdef CONFIG_CPU_S3C2442 extern int s3c2442_init(void); + +extern void s3c2442_map_io(void); #else #define s3c2442_init NULL +#define s3c2442_map_io NULL #endif diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c index b732b773b9af..0aa32f242ee4 100644 --- a/arch/arm/plat-samsung/gpio-config.c +++ b/arch/arm/plat-samsung/gpio-config.c @@ -280,18 +280,17 @@ s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, } #endif -#ifdef CONFIG_S3C_GPIO_PULL_UP -int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) +#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN) +static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull, + s3c_gpio_pull_t updown) { void __iomem *reg = chip->base + 0x08; u32 pup = __raw_readl(reg); - pup = __raw_readl(reg); - - if (pup == S3C_GPIO_PULL_UP) + if (pull == updown) pup &= ~(1 << off); - else if (pup == S3C_GPIO_PULL_NONE) + else if (pull == S3C_GPIO_PULL_NONE) pup |= (1 << off); else return -EINVAL; @@ -300,17 +299,45 @@ int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, return 0; } -s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off) +static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t updown) { void __iomem *reg = chip->base + 0x08; u32 pup = __raw_readl(reg); pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP; + return pup ? S3C_GPIO_PULL_NONE : updown; +} +#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */ + +#ifdef CONFIG_S3C_GPIO_PULL_UP +s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); +} + +int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); } #endif /* CONFIG_S3C_GPIO_PULL_UP */ +#ifdef CONFIG_S3C_GPIO_PULL_DOWN +s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, + unsigned int off) +{ + return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); +} + +int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); +} +#endif /* CONFIG_S3C_GPIO_PULL_DOWN */ + #ifdef CONFIG_S5P_GPIO_DRVSTR s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) { diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 8fd65d8b5863..0d2c5703f1ee 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -210,6 +210,17 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, unsigned int off); /** + * s3c_gpio_getpull_1down() - Get configuration for choice of down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-down resistor for the + * given GPIO in the same case as s3c_gpio_setpull_1down. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, + unsigned int off); + +/** * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 55590a4d87c9..2fea897ebeb1 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Sep 9 22:43:01 2010 +# Last update: Sun Dec 12 23:24:27 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2321,7 +2321,7 @@ mx31txtr MACH_MX31TXTR MX31TXTR 2332 u380 MACH_U380 U380 2333 oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334 npcmx50 MACH_NPCMX50 NPCMX50 2335 -mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336 +mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336 mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337 riom MACH_RIOM RIOM 2338 comcas MACH_COMCAS COMCAS 2339 @@ -2355,7 +2355,7 @@ at91sam9263cs MACH_AT91SAM9263CS AT91SAM9263CS 2366 csb732 MACH_CSB732 CSB732 2367 u8500 MACH_U8500 U8500 2368 huqiu MACH_HUQIU HUQIU 2369 -mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370 +mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370 pmt1g MACH_PMT1G PMT1G 2371 htcelf MACH_HTCELF HTCELF 2372 armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373 @@ -2971,7 +2971,7 @@ premierwave_en MACH_PREMIERWAVE_EN PREMIERWAVE_EN 2985 wasabi MACH_WASABI WASABI 2986 vivow MACH_VIVOW VIVOW 2987 mx50_rdp MACH_MX50_RDP MX50_RDP 2988 -universal MACH_UNIVERSAL UNIVERSAL 2989 +universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989 real6410 MACH_REAL6410 REAL6410 2990 spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991 ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992 @@ -3044,3 +3044,178 @@ harvest_desoto MACH_HARVEST_DESOTO HARVEST_DESOTO 3059 msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060 spear900 MACH_SPEAR900 SPEAR900 3061 pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062 +rdstor MACH_RDSTOR RDSTOR 3063 +usdloader MACH_USDLOADER USDLOADER 3064 +tsoploader MACH_TSOPLOADER TSOPLOADER 3065 +kronos MACH_KRONOS KRONOS 3066 +ffcore MACH_FFCORE FFCORE 3067 +mone MACH_MONE MONE 3068 +unit2s MACH_UNIT2S UNIT2S 3069 +acer_a5 MACH_ACER_A5 ACER_A5 3070 +etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071 +stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072 +p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073 +tulip MACH_TULIP TULIP 3074 +sunflower MACH_SUNFLOWER SUNFLOWER 3075 +rib MACH_RIB RIB 3076 +clod MACH_CLOD CLOD 3077 +rump MACH_RUMP RUMP 3078 +tenderloin MACH_TENDERLOIN TENDERLOIN 3079 +shortloin MACH_SHORTLOIN SHORTLOIN 3080 +crespo MACH_CRESPO CRESPO 3081 +antares MACH_ANTARES ANTARES 3082 +wb40n MACH_WB40N WB40N 3083 +herring MACH_HERRING HERRING 3084 +naxy400 MACH_NAXY400 NAXY400 3085 +naxy1200 MACH_NAXY1200 NAXY1200 3086 +vpr200 MACH_VPR200 VPR200 3087 +bug20 MACH_BUG20 BUG20 3088 +goflexnet MACH_GOFLEXNET GOFLEXNET 3089 +torbreck MACH_TORBRECK TORBRECK 3090 +saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091 +callisto MACH_CALLISTO CALLISTO 3092 +multhsu MACH_MULTHSU MULTHSU 3093 +saluda MACH_SALUDA SALUDA 3094 +pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095 +vc0718 MACH_VC0718 VC0718 3096 +mvblx MACH_MVBLX MVBLX 3097 +inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098 +inhand_fury MACH_INHAND_FURY INHAND_FURY 3099 +inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100 +hdnvp MACH_HDNVP HDNVP 3101 +softwinner MACH_SOFTWINNER SOFTWINNER 3102 +prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103 +nas6210 MACH_NAS6210 NAS6210 3104 +unisdev MACH_UNISDEV UNISDEV 3105 +sbca11 MACH_SBCA11 SBCA11 3106 +saga MACH_SAGA SAGA 3107 +ns_k330 MACH_NS_K330 NS_K330 3108 +tanna MACH_TANNA TANNA 3109 +imate8502 MACH_IMATE8502 IMATE8502 3110 +aspen MACH_ASPEN ASPEN 3111 +daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112 +zmx25 MACH_ZMX25 ZMX25 3113 +maple1 MACH_MAPLE1 MAPLE1 3114 +qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115 +qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116 +abilene MACH_ABILENE ABILENE 3117 +eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118 +iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119 +coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120 +santiago MACH_SANTIAGO SANTIAGO 3121 +mx257sol MACH_MX257SOL MX257SOL 3122 +strasbourg MACH_STRASBOURG STRASBOURG 3123 +msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124 +smartqv5 MACH_SMARTQV5 SMARTQV5 3125 +smartqv3 MACH_SMARTQV3 SMARTQV3 3126 +smartqv7 MACH_SMARTQV7 SMARTQV7 3127 +paz00 MACH_PAZ00 PAZ00 3128 +acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129 +htcwillow MACH_HTCWILLOW HTCWILLOW 3130 +fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131 +hdgu MACH_HDGU HDGU 3132 +pyramid MACH_PYRAMID PYRAMID 3133 +epiphan MACH_EPIPHAN EPIPHAN 3134 +omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135 +gurnard MACH_GURNARD GURNARD 3136 +gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137 +bcm2708 MACH_BCM2708 BCM2708 3138 +mx51_ggc MACH_MX51_GGC MX51_GGC 3139 +sharespace MACH_SHARESPACE SHARESPACE 3140 +haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141 +simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142 +crux MACH_CRUX CRUX 3143 +mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144 +charon MACH_CHARON CHARON 3145 +picocom3 MACH_PICOCOM3 PICOCOM3 3146 +picocom4 MACH_PICOCOM4 PICOCOM4 3147 +serrano MACH_SERRANO SERRANO 3148 +doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149 +evsy MACH_EVSY EVSY 3150 +huashan MACH_HUASHAN HUASHAN 3151 +lausanne MACH_LAUSANNE LAUSANNE 3152 +emerald MACH_EMERALD EMERALD 3153 +tqma35 MACH_TQMA35 TQMA35 3154 +marvel MACH_MARVEL MARVEL 3155 +manuae MACH_MANUAE MANUAE 3156 +chacha MACH_CHACHA CHACHA 3157 +lemon MACH_LEMON LEMON 3158 +csc MACH_CSC CSC 3159 +gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160 +t20 MACH_T20 T20 3161 +hdmini MACH_HDMINI HDMINI 3162 +sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163 +express MACH_EXPRESS EXPRESS 3164 +express_kt MACH_EXPRESS_KT EXPRESS_KT 3165 +maximasp MACH_MAXIMASP MAXIMASP 3166 +nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167 +nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168 +sunfire MACH_SUNFIRE SUNFIRE 3169 +arowana MACH_AROWANA AROWANA 3170 +tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171 +tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172 +edison MACH_EDISON EDISON 3173 +svp8500v1 MACH_SVP8500V1 SVP8500V1 3174 +svp8500v2 MACH_SVP8500V2 SVP8500V2 3175 +svp5500 MACH_SVP5500 SVP5500 3176 +b5500 MACH_B5500 B5500 3177 +s5500 MACH_S5500 S5500 3178 +icon MACH_ICON ICON 3179 +elephant MACH_ELEPHANT ELEPHANT 3180 +msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181 +shooter MACH_SHOOTER SHOOTER 3182 +spade_lte MACH_SPADE_LTE SPADE_LTE 3183 +philhwani MACH_PHILHWANI PHILHWANI 3184 +gsncomm MACH_GSNCOMM GSNCOMM 3185 +strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186 +mmm MACH_MMM MMM 3187 +davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188 +ag5evm MACH_AG5EVM AG5EVM 3189 +sc575plc MACH_SC575PLC SC575PLC 3190 +sc575hmi MACH_SC575IPC SC575IPC 3191 +omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192 +g7 MACH_G7 G7 3193 +top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194 +top9000_su MACH_TOP9000_SU TOP9000_SU 3195 +utm300 MACH_UTM300 UTM300 3196 +tsunagi MACH_TSUNAGI TSUNAGI 3197 +ts75xx MACH_TS75XX TS75XX 3198 +msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199 +ts47xx MACH_TS47XX TS47XX 3200 +da850_k5 MACH_DA850_K5 DA850_K5 3201 +ax502 MACH_AX502 AX502 3202 +igep0032 MACH_IGEP0032 IGEP0032 3203 +antero MACH_ANTERO ANTERO 3204 +synergy MACH_SYNERGY SYNERGY 3205 +ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206 +wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207 +punica MACH_PUNICA PUNICA 3208 +sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209 +mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210 +mackerel MACH_MACKEREL MACKEREL 3211 +fa9x27 MACH_FA9X27 FA9X27 3213 +ns2816tb MACH_NS2816TB NS2816TB 3214 +ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215 +ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216 +kaen MACH_KAEN KAEN 3217 +nv1000 MACH_NV1000 NV1000 3218 +nuc950ts MACH_NUC950TS NUC950TS 3219 +nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220 +ast2200 MACH_AST2200 AST2200 3221 +lead MACH_LEAD LEAD 3222 +unino1 MACH_UNINO1 UNINO1 3223 +greeco MACH_GREECO GREECO 3224 +verdi MACH_VERDI VERDI 3225 +dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226 +quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227 +abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228 +svcid MACH_SVCID SVCID 3229 +msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230 +msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231 +icon_g MACH_ICON_G ICON_G 3232 +mb3 MACH_MB3 MB3 3233 +gsia18s MACH_GSIA18S GSIA18S 3234 +pivicc MACH_PIVICC PIVICC 3235 +pcm048 MACH_PCM048 PCM048 3236 +dds MACH_DDS DDS 3237 +chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238 diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index d66cead97d28..9897dcfc16d6 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -206,6 +206,7 @@ ENTRY(vfp_save_state) mov pc, lr ENDPROC(vfp_save_state) + .align last_VFP_context_address: .word last_VFP_context diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 67a2fa2caa49..0a9b5b8b2a19 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -19,6 +19,8 @@ config MIPS select GENERIC_ATOMIC64 if !64BIT select HAVE_DMA_ATTRS select HAVE_DMA_API_DEBUG + select HAVE_GENERIC_HARDIRQS + select GENERIC_IRQ_PROBE menu "Machine selection" @@ -1664,6 +1666,28 @@ config PAGE_SIZE_64KB endchoice +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB + default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB + range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB + default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB + range 11 64 + default "11" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 11 means that the largest free memory block is 2^10 pages. + + The page size is not necessarily 4KB. Keep this in mind + when choosing a value for this option. + config BOARD_SCACHE bool @@ -1922,20 +1946,6 @@ config CPU_R4400_WORKAROUNDS bool # -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config GENERIC_IRQ_PROBE - bool - default y - -config IRQ_PER_CPU - bool - -# # - Highmem only makes sense for the 32-bit kernel. # - The current highmem code will only work properly on physically indexed # caches such as R3000, SB1, R7000 or those that look like they're virtually diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 3691630931d6..9e7814db3d03 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -27,6 +27,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, unsigned int old_state) { +#ifdef CONFIG_SERIAL_8250 switch (state) { case 0: if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) { @@ -49,6 +50,7 @@ static void alchemy_8250_pm(struct uart_port *port, unsigned int state, serial8250_do_pm(port, state, old_state); break; } +#endif } #define PORT(_base, _irq) \ diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index b30df5c97ad3..baeb21385058 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -54,10 +54,9 @@ void __init prom_init(void) prom_init_cmdline(); memsize_str = prom_getenv("memsize"); - if (!memsize_str) + if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize)) memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE; - else - strict_strtoul(memsize_str, 0, &memsize); + add_memory_region(0, memsize, BOOT_MEM_RAM); } diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c index fc0e7154e8d6..2ca4ada1c291 100644 --- a/arch/mips/ar7/clock.c +++ b/arch/mips/ar7/clock.c @@ -239,12 +239,12 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, calculate(base_clock, frequency, &prediv, &postdiv, &mul); writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl); - msleep(1); + mdelay(1); writel(4, &clock->pll); while (readl(&clock->pll) & PLL_STATUS) ; writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll); - msleep(75); + mdelay(75); } static void __init tnetd7300_init_clocks(void) @@ -456,7 +456,7 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); -int __init ar7_init_clocks(void) +void __init ar7_init_clocks(void) { switch (ar7_chip_id()) { case AR7_CHIP_7100: @@ -472,7 +472,4 @@ int __init ar7_init_clocks(void) } /* adjust vbus clock rate */ vbus_clk.rate = bus_clk.rate / 2; - - return 0; } -arch_initcall(ar7_init_clocks); diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c index 5fb8a0134085..22c93213b233 100644 --- a/arch/mips/ar7/time.c +++ b/arch/mips/ar7/time.c @@ -30,6 +30,9 @@ void __init plat_time_init(void) { struct clk *cpu_clk; + /* Initialize ar7 clocks so the CPU clock frequency is correct */ + ar7_init_clocks(); + cpu_clk = clk_get(NULL, "cpu"); if (IS_ERR(cpu_clk)) { printk(KERN_ERR "unable to get cpu clock\n"); diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index b1aee33efd11..c95f90bf734c 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -32,7 +32,6 @@ #include <asm/reboot.h> #include <asm/time.h> #include <bcm47xx.h> -#include <asm/fw/cfe/cfe_api.h> #include <asm/mach-bcm47xx/nvram.h> struct ssb_bus ssb_bcm47xx; @@ -57,68 +56,112 @@ static void bcm47xx_machine_halt(void) cpu_relax(); } -static void str2eaddr(char *str, char *dest) -{ - int i = 0; +#define READ_FROM_NVRAM(_outvar, name, buf) \ + if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\ + sprom->_outvar = simple_strtoul(buf, NULL, 0); - if (str == NULL) { - memset(dest, 0, 6); - return; +static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) +{ + char buf[100]; + u32 boardflags; + + memset(sprom, 0, sizeof(struct ssb_sprom)); + + sprom->revision = 1; /* Fallback: Old hardware does not define this. */ + READ_FROM_NVRAM(revision, "sromrev", buf); + if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0) + nvram_parse_macaddr(buf, sprom->il0mac); + if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) + nvram_parse_macaddr(buf, sprom->et0mac); + if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) + nvram_parse_macaddr(buf, sprom->et1mac); + READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf); + READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf); + READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf); + READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf); + READ_FROM_NVRAM(board_rev, "boardrev", buf); + READ_FROM_NVRAM(country_code, "ccode", buf); + READ_FROM_NVRAM(ant_available_a, "aa5g", buf); + READ_FROM_NVRAM(ant_available_bg, "aa2g", buf); + READ_FROM_NVRAM(pa0b0, "pa0b0", buf); + READ_FROM_NVRAM(pa0b1, "pa0b1", buf); + READ_FROM_NVRAM(pa0b2, "pa0b2", buf); + READ_FROM_NVRAM(pa1b0, "pa1b0", buf); + READ_FROM_NVRAM(pa1b1, "pa1b1", buf); + READ_FROM_NVRAM(pa1b2, "pa1b2", buf); + READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf); + READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf); + READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf); + READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf); + READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf); + READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf); + READ_FROM_NVRAM(gpio0, "wl0gpio0", buf); + READ_FROM_NVRAM(gpio1, "wl0gpio1", buf); + READ_FROM_NVRAM(gpio2, "wl0gpio2", buf); + READ_FROM_NVRAM(gpio3, "wl0gpio3", buf); + READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf); + READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf); + READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf); + READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf); + READ_FROM_NVRAM(itssi_a, "pa1itssit", buf); + READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf); + READ_FROM_NVRAM(tri2g, "tri2g", buf); + READ_FROM_NVRAM(tri5gl, "tri5gl", buf); + READ_FROM_NVRAM(tri5g, "tri5g", buf); + READ_FROM_NVRAM(tri5gh, "tri5gh", buf); + READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf); + READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf); + READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf); + READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf); + READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf); + READ_FROM_NVRAM(bxa2g, "bxa2g", buf); + READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf); + READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf); + READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf); + READ_FROM_NVRAM(bxa5g, "bxa5g", buf); + READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf); + READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf); + READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf); + READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf); + READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf); + + if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) { + boardflags = simple_strtoul(buf, NULL, 0); + if (boardflags) { + sprom->boardflags_lo = (boardflags & 0x0000FFFFU); + sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16; + } } - - for (;;) { - dest[i++] = (char) simple_strtoul(str, NULL, 16); - str += 2; - if (!*str++ || i == 6) - break; + if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) { + boardflags = simple_strtoul(buf, NULL, 0); + if (boardflags) { + sprom->boardflags2_lo = (boardflags & 0x0000FFFFU); + sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16; + } } } static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) { - char buf[100]; + char buf[20]; /* Fill boardinfo structure */ memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); - if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 || - nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0) - iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); - if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 || - nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) + if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0) + iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0); + else + iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; + if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); - if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 || - nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) + if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); - /* Fill sprom structure */ - memset(&(iv->sprom), 0, sizeof(struct ssb_sprom)); - iv->sprom.revision = 3; - - if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, iv->sprom.et0mac); + bcm47xx_fill_sprom(&iv->sprom); - if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0) - str2eaddr(buf, iv->sprom.et1mac); - - if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0) - iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0); - - if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 || - nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0) - iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0); - - if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 || - nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0) - iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10); - - if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 || - nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0) - iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10); + if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) + iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); return 0; } @@ -126,12 +169,28 @@ static int bcm47xx_get_invariants(struct ssb_bus *bus, void __init plat_mem_setup(void) { int err; + char buf[100]; + struct ssb_mipscore *mcore; err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE, bcm47xx_get_invariants); if (err) panic("Failed to initialize SSB bus (err %d)\n", err); + mcore = &ssb_bcm47xx.mipscore; + if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { + if (strstr(buf, "console=ttyS1")) { + struct ssb_serial_port port; + + printk(KERN_DEBUG "Swapping serial ports!\n"); + /* swap serial ports */ + memcpy(&port, &mcore->serial_ports[0], sizeof(port)); + memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], + sizeof(port)); + memcpy(&mcore->serial_ports[1], &port, sizeof(port)); + } + } + _machine_restart = bcm47xx_machine_restart; _machine_halt = bcm47xx_machine_halt; pm_power_off = bcm47xx_machine_halt; diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 06d59dcbe243..86877539c6e8 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -111,8 +111,8 @@ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM */ -#define PRID_IMP_BMIPS4KC 0x4000 -#define PRID_IMP_BMIPS32 0x8000 +#define PRID_IMP_BMIPS32_REV4 0x4000 +#define PRID_IMP_BMIPS32_REV8 0x8000 #define PRID_IMP_BMIPS3300 0x9000 #define PRID_IMP_BMIPS3300_ALT 0x9100 #define PRID_IMP_BMIPS3300_BUG 0x0000 diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index fd1d39eb7431..455c0ac7d4ea 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -249,7 +249,8 @@ extern struct mips_abi mips_abi_n32; #define SET_PERSONALITY(ex) \ do { \ - set_personality(PER_LINUX); \ + if (personality(current->personality) != PER_LINUX) \ + set_personality(PER_LINUX); \ \ current->thread.abi = &mips_abi; \ } while (0) @@ -296,6 +297,8 @@ do { \ #define SET_PERSONALITY(ex) \ do { \ + unsigned int p; \ + \ clear_thread_flag(TIF_32BIT_REGS); \ clear_thread_flag(TIF_32BIT_ADDR); \ \ @@ -304,7 +307,8 @@ do { \ else \ current->thread.abi = &mips_abi; \ \ - if (current->personality != PER_LINUX32) \ + p = personality(current->personality); \ + if (p != PER_LINUX32 && p != PER_LINUX) \ set_personality(PER_LINUX); \ } while (0) diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index c98bf514ec7d..5b017f23e243 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -329,10 +329,14 @@ static inline void pfx##write##bwlq(type val, \ "dsrl32 %L0, %L0, 0" "\n\t" \ "dsll32 %M0, %M0, 0" "\n\t" \ "or %L0, %L0, %M0" "\n\t" \ + ".set push" "\n\t" \ + ".set noreorder" "\n\t" \ + ".set nomacro" "\n\t" \ "sd %L0, %2" "\n\t" \ + ".set pop" "\n\t" \ ".set mips0" "\n" \ : "=r" (__tmp) \ - : "0" (__val), "m" (*__mem)); \ + : "0" (__val), "R" (*__mem)); \ if (irq) \ local_irq_restore(__flags); \ } else \ @@ -355,12 +359,16 @@ static inline type pfx##read##bwlq(const volatile void __iomem *mem) \ local_irq_save(__flags); \ __asm__ __volatile__( \ ".set mips3" "\t\t# __readq" "\n\t" \ + ".set push" "\n\t" \ + ".set noreorder" "\n\t" \ + ".set nomacro" "\n\t" \ "ld %L0, %1" "\n\t" \ + ".set pop" "\n\t" \ "dsra32 %M0, %L0, 0" "\n\t" \ "sll %L0, %L0, 0" "\n\t" \ ".set mips0" "\n" \ : "=r" (__val) \ - : "m" (*__mem)); \ + : "R" (*__mem)); \ if (irq) \ local_irq_restore(__flags); \ } else { \ diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index 7919d76186bf..07d3fadb2443 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -201,7 +201,6 @@ static inline void ar7_device_off(u32 bit) } int __init ar7_gpio_init(void); - -int __init ar7_gpio_init(void); +void __init ar7_init_clocks(void); #endif /* __AR7_H__ */ diff --git a/arch/mips/include/asm/mach-bcm47xx/nvram.h b/arch/mips/include/asm/mach-bcm47xx/nvram.h index c58ebd8bc155..9759588ba3cf 100644 --- a/arch/mips/include/asm/mach-bcm47xx/nvram.h +++ b/arch/mips/include/asm/mach-bcm47xx/nvram.h @@ -12,6 +12,7 @@ #define __NVRAM_H #include <linux/types.h> +#include <linux/kernel.h> struct nvram_header { u32 magic; @@ -36,4 +37,10 @@ struct nvram_header { extern int nvram_getenv(char *name, char *val, size_t val_len); +static inline void nvram_parse_macaddr(char *buf, u8 *macaddr) +{ + sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1], + &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]); +} + #endif diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 5742bb4d78f4..5c0a3575877c 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -5,7 +5,7 @@ * * Copyright (c) 2009 Qi Hardware inc., * Author: Xiangfu Liu <xiangfu@qi-hardware.com> - * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de> + * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 or later @@ -235,7 +235,7 @@ static const unsigned int qi_lb60_keypad_rows[] = { QI_LB60_GPIO_KEYIN(3), QI_LB60_GPIO_KEYIN(4), QI_LB60_GPIO_KEYIN(5), - QI_LB60_GPIO_KEYIN(7), + QI_LB60_GPIO_KEYIN(6), QI_LB60_GPIO_KEYIN8, }; diff --git a/arch/mips/jz4740/platform.c b/arch/mips/jz4740/platform.c index 95bc2b5b14f1..1cc9e544d16b 100644 --- a/arch/mips/jz4740/platform.c +++ b/arch/mips/jz4740/platform.c @@ -208,7 +208,7 @@ struct platform_device jz4740_i2s_device = { /* PCM */ struct platform_device jz4740_pcm_device = { - .name = "jz4740-pcm", + .name = "jz4740-pcm-audio", .id = -1, }; diff --git a/arch/mips/jz4740/prom.c b/arch/mips/jz4740/prom.c index cfeac15eb2e4..4a70407f55bb 100644 --- a/arch/mips/jz4740/prom.c +++ b/arch/mips/jz4740/prom.c @@ -23,7 +23,7 @@ #include <asm/bootinfo.h> #include <asm/mach-jz4740/base.h> -void jz4740_init_cmdline(int argc, char *argv[]) +static __init void jz4740_init_cmdline(int argc, char *argv[]) { unsigned int count = COMMAND_LINE_SIZE - 1; int i; diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 2f4d7a99bcc2..98c5a9737c14 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -32,7 +32,7 @@ static int mips_next_event(unsigned long delta, cnt = read_c0_count(); cnt += delta; write_c0_compare(cnt); - res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0; + res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0; return res; } diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 71620e19827a..68dae7b6b5db 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -905,7 +905,8 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); switch (c->processor_id & 0xff00) { - case PRID_IMP_BMIPS32: + case PRID_IMP_BMIPS32_REV4: + case PRID_IMP_BMIPS32_REV8: c->cputype = CPU_BMIPS32; __cpu_name[cpu] = "Broadcom BMIPS32"; break; @@ -933,10 +934,6 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "Broadcom BMIPS5000"; c->options |= MIPS_CPU_ULRI; break; - case PRID_IMP_BMIPS4KC: - c->cputype = CPU_4KC; - __cpu_name[cpu] = "MIPS 4Kc"; - break; } } diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 6343b4a5b835..876a75cc376f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -251,14 +251,15 @@ SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz, SYSCALL_DEFINE1(32_personality, unsigned long, personality) { + unsigned int p = personality & 0xffffffff; int ret; - personality &= 0xffffffff; + if (personality(current->personality) == PER_LINUX32 && - personality == PER_LINUX) - personality = PER_LINUX32; - ret = sys_personality(personality); - if (ret == PER_LINUX32) - ret = PER_LINUX; + personality(p) == PER_LINUX) + p = (p & ~PER_MASK) | PER_LINUX32; + ret = sys_personality(p); + if (ret != -1 && personality(ret) == PER_LINUX32) + ret = (ret & ~PER_MASK) | PER_LINUX; return ret; } diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 99960940d4a4..ae167df73ddd 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -142,7 +142,6 @@ int copy_thread(unsigned long clone_flags, unsigned long usp, childregs->regs[7] = 0; /* Clear error flag */ childregs->regs[2] = 0; /* Child gets zero as return value */ - regs->regs[2] = p->pid; if (childregs->cp0_status & ST0_CU0) { childregs->regs[28] = (unsigned long) ti; diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index e000b278f024..9dbe58368953 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -100,7 +100,7 @@ void __init device_tree_init(void) return; base = virt_to_phys((void *)initial_boot_params); - size = initial_boot_params->totalsize; + size = be32_to_cpu(initial_boot_params->totalsize); /* Before we do anything, lets reserve the dt blob */ reserve_mem_mach(base, size); diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 43e7cdc5ded2..c0e81418ba21 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -153,7 +153,7 @@ static void __cpuinit vsmp_init_secondary(void) { extern int gic_present; - /* This is Malta specific: IPI,performance and timer inetrrupts */ + /* This is Malta specific: IPI,performance and timer interrupts */ if (gic_present) change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 | STATUSF_IP7); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 8e9fbe75894e..e97104302541 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -83,7 +83,8 @@ extern asmlinkage void handle_mcheck(void); extern asmlinkage void handle_reserved(void); extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, - struct mips_fpu_struct *ctx, int has_fpu); + struct mips_fpu_struct *ctx, int has_fpu, + void *__user *fault_addr); void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); @@ -661,12 +662,36 @@ asmlinkage void do_ov(struct pt_regs *regs) force_sig_info(SIGFPE, &info, current); } +static int process_fpemu_return(int sig, void __user *fault_addr) +{ + if (sig == SIGSEGV || sig == SIGBUS) { + struct siginfo si = {0}; + si.si_addr = fault_addr; + si.si_signo = sig; + if (sig == SIGSEGV) { + if (find_vma(current->mm, (unsigned long)fault_addr)) + si.si_code = SEGV_ACCERR; + else + si.si_code = SEGV_MAPERR; + } else { + si.si_code = BUS_ADRERR; + } + force_sig_info(sig, &si, current); + return 1; + } else if (sig) { + force_sig(sig, current); + return 1; + } else { + return 0; + } +} + /* * XXX Delayed fp exceptions when doing a lazy ctx switch XXX */ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) { - siginfo_t info; + siginfo_t info = {0}; if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE) == NOTIFY_STOP) @@ -675,6 +700,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) if (fcr31 & FPU_CSR_UNI_X) { int sig; + void __user *fault_addr = NULL; /* * Unimplemented operation exception. If we've got the full @@ -690,7 +716,8 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) lose_fpu(1); /* Run the emulator */ - sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1); + sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, + &fault_addr); /* * We can't allow the emulated instruction to leave any of @@ -702,8 +729,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) own_fpu(1); /* Using the FPU again. */ /* If something went wrong, signal */ - if (sig) - force_sig(sig, current); + process_fpemu_return(sig, fault_addr); return; } else if (fcr31 & FPU_CSR_INV_X) @@ -996,11 +1022,11 @@ asmlinkage void do_cpu(struct pt_regs *regs) if (!raw_cpu_has_fpu) { int sig; + void __user *fault_addr = NULL; sig = fpu_emulator_cop1Handler(regs, - ¤t->thread.fpu, 0); - if (sig) - force_sig(sig, current); - else + ¤t->thread.fpu, + 0, &fault_addr); + if (!process_fpemu_return(sig, fault_addr)) mt_ase_fp_affinity(); } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 3eb3cde2f661..6a1fdfef8fde 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1092,6 +1092,10 @@ static int vpe_open(struct inode *inode, struct file *filp) /* this of-course trashes what was there before... */ v->pbuffer = vmalloc(P_SIZE); + if (!v->pbuffer) { + pr_warning("VPE loader: unable to allocate memory\n"); + return -ENOMEM; + } v->plen = P_SIZE; v->load_addr = NULL; v->len = 0; @@ -1149,10 +1153,9 @@ static int vpe_release(struct inode *inode, struct file *filp) if (ret < 0) v->shared_ptr = NULL; - // cleanup any temp buffers - if (v->pbuffer) - vfree(v->pbuffer); + vfree(v->pbuffer); v->plen = 0; + return ret; } @@ -1169,11 +1172,6 @@ static ssize_t vpe_write(struct file *file, const char __user * buffer, if (v == NULL) return -ENODEV; - if (v->pbuffer == NULL) { - printk(KERN_ERR "VPE loader: no buffer for program\n"); - return -ENOMEM; - } - if ((count + v->len) > v->plen) { printk(KERN_WARNING "VPE loader: elf size too big. Perhaps strip uneeded symbols\n"); diff --git a/arch/mips/lib/memset.S b/arch/mips/lib/memset.S index 77dc3b20110a..606c8a9efe3b 100644 --- a/arch/mips/lib/memset.S +++ b/arch/mips/lib/memset.S @@ -161,16 +161,16 @@ FEXPORT(__bzero) .Lfwd_fixup: PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) andi a2, 0x3f + LONG_L t0, THREAD_BUADDR(t0) LONG_ADDU a2, t1 jr ra LONG_SUBU a2, t0 .Lpartial_fixup: PTR_L t0, TI_TASK($28) - LONG_L t0, THREAD_BUADDR(t0) andi a2, LONGMASK + LONG_L t0, THREAD_BUADDR(t0) LONG_ADDU a2, t1 jr ra LONG_SUBU a2, t0 diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index ae4cff97a56c..11b193f848f8 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -29,9 +29,9 @@ unsigned long memsize, highmemsize; #define parse_even_earlier(res, option, p) \ do { \ + int ret; \ if (strncmp(option, (char *)p, strlen(option)) == 0) \ - strict_strtol((char *)p + strlen(option"="), \ - 10, &res); \ + ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \ } while (0) void __init prom_init_env(void) diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index b2ad1b0910ff..d32cb0503110 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -64,7 +64,7 @@ static int fpu_emu(struct pt_regs *, struct mips_fpu_struct *, #if __mips >= 4 && __mips != 32 static int fpux_emu(struct pt_regs *, - struct mips_fpu_struct *, mips_instruction); + struct mips_fpu_struct *, mips_instruction, void *__user *); #endif /* Further private data for which no space exists in mips_fpu_struct */ @@ -208,16 +208,23 @@ static inline int cop1_64bit(struct pt_regs *xcp) * Two instructions if the instruction is in a branch delay slot. */ -static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) +static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx, + void *__user *fault_addr) { mips_instruction ir; unsigned long emulpc, contpc; unsigned int cond; - if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { + if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; return SIGBUS; } + if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; + return SIGSEGV; + } /* XXX NEC Vr54xx bug workaround */ if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir)) @@ -245,10 +252,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) #endif return SIGILL; } - if (get_user(ir, (mips_instruction __user *) emulpc)) { + if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)emulpc; return SIGBUS; } + if (__get_user(ir, (mips_instruction __user *) emulpc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)emulpc; + return SIGSEGV; + } /* __compute_return_epc() will have updated cp0_epc */ contpc = xcp->cp0_epc; /* In order not to confuse ptrace() et al, tweak context */ @@ -269,10 +282,17 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) u64 val; MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + + if (!access_ok(VERIFY_READ, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } DITOREG(val, MIPSInst_RT(ir)); break; } @@ -284,10 +304,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_RT(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; } @@ -297,10 +323,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) u32 val; MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + if (!access_ok(VERIFY_READ, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } SITOREG(val, MIPSInst_RT(ir)); break; } @@ -312,10 +344,16 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_RT(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; } @@ -440,11 +478,18 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) contpc = (xcp->cp0_epc + (MIPSInst_SIMM(ir) << 2)); - if (get_user(ir, - (mips_instruction __user *) xcp->cp0_epc)) { + if (!access_ok(VERIFY_READ, xcp->cp0_epc, + sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; return SIGBUS; } + if (__get_user(ir, + (mips_instruction __user *) xcp->cp0_epc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; + return SIGSEGV; + } switch (MIPSInst_OPCODE(ir)) { case lwc1_op: @@ -506,9 +551,8 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx) #if __mips >= 4 && __mips != 32 case cop1x_op:{ - int sig; - - if ((sig = fpux_emu(xcp, ctx, ir))) + int sig = fpux_emu(xcp, ctx, ir, fault_addr); + if (sig) return sig; break; } @@ -604,7 +648,7 @@ DEF3OP(nmadd, dp, ieee754dp_mul, ieee754dp_add, ieee754dp_neg); DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg); static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, - mips_instruction ir) + mips_instruction ir, void *__user *fault_addr) { unsigned rcsr = 0; /* resulting csr */ @@ -624,10 +668,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, xcp->regs[MIPSInst_FT(ir)]); MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + if (!access_ok(VERIFY_READ, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } SITOREG(val, MIPSInst_FD(ir)); break; @@ -638,10 +688,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, MIPS_FPU_EMU_INC_STATS(stores); SIFROMREG(val, MIPSInst_FS(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; case madd_s_op: @@ -701,10 +757,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, xcp->regs[MIPSInst_FT(ir)]); MIPS_FPU_EMU_INC_STATS(loads); - if (get_user(val, va)) { + if (!access_ok(VERIFY_READ, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__get_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } DITOREG(val, MIPSInst_FD(ir)); break; @@ -714,10 +776,16 @@ static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, MIPS_FPU_EMU_INC_STATS(stores); DIFROMREG(val, MIPSInst_FS(ir)); - if (put_user(val, va)) { + if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; return SIGBUS; } + if (__put_user(val, va)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = va; + return SIGSEGV; + } break; case madd_d_op: @@ -1242,7 +1310,7 @@ static int fpu_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx, } int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, - int has_fpu) + int has_fpu, void *__user *fault_addr) { unsigned long oldepc, prevepc; mips_instruction insn; @@ -1252,10 +1320,16 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, do { prevepc = xcp->cp0_epc; - if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { + if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) { MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; return SIGBUS; } + if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) { + MIPS_FPU_EMU_INC_STATS(errors); + *fault_addr = (mips_instruction __user *)xcp->cp0_epc; + return SIGSEGV; + } if (insn == 0) xcp->cp0_epc += 4; /* skip nops */ else { @@ -1267,7 +1341,7 @@ int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, */ /* convert to ieee library modes */ ieee754_csr.rm = ieee_rm[ieee754_csr.rm]; - sig = cop1Emulate(xcp, ctx); + sig = cop1Emulate(xcp, ctx, fault_addr); /* revert to mips rounding mode */ ieee754_csr.rm = mips_rm[ieee754_csr.rm]; } diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 4fc1a0fbe007..21ea14efb837 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -288,7 +288,7 @@ int mips_dma_supported(struct device *dev, u64 mask) return plat_dma_supported(dev, mask); } -void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size, +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { BUG_ON(direction == DMA_NONE); @@ -298,6 +298,8 @@ void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size, __dma_sync((unsigned long)vaddr, size, direction); } +EXPORT_SYMBOL(dma_cache_sync); + static struct dma_map_ops mips_default_dma_map_ops = { .alloc_coherent = mips_dma_alloc_coherent, .free_coherent = mips_dma_free_coherent, diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c index 505fecad4684..9cca8de00545 100644 --- a/arch/mips/mm/sc-mips.c +++ b/arch/mips/mm/sc-mips.c @@ -68,6 +68,9 @@ static struct bcache_ops mips_sc_ops = { */ static inline int mips_sc_is_activated(struct cpuinfo_mips *c) { + unsigned int config2 = read_c0_config2(); + unsigned int tmp; + /* Check the bypass bit (L2B) */ switch (c->cputype) { case CPU_34K: @@ -83,6 +86,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c) c->scache.linesz = 2 << tmp; else return 0; + return 1; } static inline int __init mips_sc_probe(void) diff --git a/arch/mips/pmc-sierra/yosemite/py-console.c b/arch/mips/pmc-sierra/yosemite/py-console.c index b7f1d9c4a8a3..434d7b1a8c6a 100644 --- a/arch/mips/pmc-sierra/yosemite/py-console.c +++ b/arch/mips/pmc-sierra/yosemite/py-console.c @@ -65,11 +65,15 @@ static unsigned char readb_outer_space(unsigned long long phys) __asm__ __volatile__ ( " .set mips3 \n" + " .set push \n" + " .set noreorder \n" + " .set nomacro \n" " ld %0, %1 \n" + " .set pop \n" " lbu %0, (%0) \n" " .set mips0 \n" : "=r" (res) - : "m" (vaddr)); + : "R" (vaddr)); write_c0_status(sr); ssnop_4(); @@ -89,11 +93,15 @@ static void writeb_outer_space(unsigned long long phys, unsigned char c) __asm__ __volatile__ ( " .set mips3 \n" + " .set push \n" + " .set noreorder \n" + " .set nomacro \n" " ld %0, %1 \n" + " .set pop \n" " sb %2, (%0) \n" " .set mips0 \n" : "=&r" (tmp) - : "m" (vaddr), "r" (c)); + : "R" (vaddr), "r" (c)); write_c0_status(sr); ssnop_4(); diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c index c308989fc464..41707a245dea 100644 --- a/arch/mips/sibyte/swarm/setup.c +++ b/arch/mips/sibyte/swarm/setup.c @@ -82,7 +82,7 @@ int swarm_be_handler(struct pt_regs *regs, int is_fixup) enum swarm_rtc_type { RTC_NONE, RTC_XICOR, - RTC_M4LT81 + RTC_M41T81, }; enum swarm_rtc_type swarm_rtc_type; @@ -96,7 +96,7 @@ void read_persistent_clock(struct timespec *ts) sec = xicor_get_time(); break; - case RTC_M4LT81: + case RTC_M41T81: sec = m41t81_get_time(); break; @@ -115,7 +115,7 @@ int rtc_mips_set_time(unsigned long sec) case RTC_XICOR: return xicor_set_time(sec); - case RTC_M4LT81: + case RTC_M41T81: return m41t81_set_time(sec); case RTC_NONE: @@ -141,7 +141,7 @@ void __init plat_mem_setup(void) if (xicor_probe()) swarm_rtc_type = RTC_XICOR; if (m41t81_probe()) - swarm_rtc_type = RTC_M4LT81; + swarm_rtc_type = RTC_M41T81; #ifdef CONFIG_VT screen_info = (struct screen_info) { diff --git a/arch/mn10300/include/asm/syscall.h b/arch/mn10300/include/asm/syscall.h new file mode 100644 index 000000000000..b44b0bb75a01 --- /dev/null +++ b/arch/mn10300/include/asm/syscall.h @@ -0,0 +1,117 @@ +/* Access to user system call parameters and results + * + * See asm-generic/syscall.h for function descriptions. + * + * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H + +#include <linux/sched.h> +#include <linux/err.h> + +extern const unsigned long sys_call_table[]; + +static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs) +{ + return regs->orig_d0; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ + regs->d0 = regs->orig_d0; +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ + unsigned long error = regs->d0; + return IS_ERR_VALUE(error) ? error : 0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->d0; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ + regs->d0 = (long) error ?: val; +} + +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + switch (i) { + case 0: + if (!n--) break; + *args++ = regs->a0; + case 1: + if (!n--) break; + *args++ = regs->d1; + case 2: + if (!n--) break; + *args++ = regs->a3; + case 3: + if (!n--) break; + *args++ = regs->a2; + case 4: + if (!n--) break; + *args++ = regs->d3; + case 5: + if (!n--) break; + *args++ = regs->d2; + case 6: + if (!n--) break; + default: + BUG(); + break; + } +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + const unsigned long *args) +{ + switch (i) { + case 0: + if (!n--) break; + regs->a0 = *args++; + case 1: + if (!n--) break; + regs->d1 = *args++; + case 2: + if (!n--) break; + regs->a3 = *args++; + case 3: + if (!n--) break; + regs->a2 = *args++; + case 4: + if (!n--) break; + regs->d3 = *args++; + case 5: + if (!n--) break; + regs->d2 = *args++; + case 6: + if (!n--) break; + default: + BUG(); + break; + } +} + +#endif /* _ASM_SYSCALL_H */ diff --git a/arch/mn10300/kernel/gdb-io-serial.c b/arch/mn10300/kernel/gdb-io-serial.c index 0d5d63c91dc3..f28dc99c6f72 100644 --- a/arch/mn10300/kernel/gdb-io-serial.c +++ b/arch/mn10300/kernel/gdb-io-serial.c @@ -73,7 +73,8 @@ void gdbstub_io_init(void) GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI; /* permit level 0 IRQs to take place */ - local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); + arch_local_change_intr_mask_level( + NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* diff --git a/arch/mn10300/kernel/gdb-io-ttysm.c b/arch/mn10300/kernel/gdb-io-ttysm.c index 97dfda23342c..abdeea153c89 100644 --- a/arch/mn10300/kernel/gdb-io-ttysm.c +++ b/arch/mn10300/kernel/gdb-io-ttysm.c @@ -87,7 +87,8 @@ void __init gdbstub_io_init(void) tmp = *gdbstub_port->_control; /* permit level 0 IRQs only */ - local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); + arch_local_change_intr_mask_level( + NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); } /* diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index a5fc3f05309b..b169d99d9f20 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -1194,7 +1194,8 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) asm volatile("mov mdr,%0" : "=d"(mdr)); local_save_flags(epsw); - local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); + arch_local_change_intr_mask_level( + NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1)); gdbstub_store_fpu(); diff --git a/arch/mn10300/kernel/time.c b/arch/mn10300/kernel/time.c index f860a340acc9..75da468090b9 100644 --- a/arch/mn10300/kernel/time.c +++ b/arch/mn10300/kernel/time.c @@ -40,21 +40,17 @@ unsigned long long sched_clock(void) unsigned long long ll; unsigned l[2]; } tsc64, result; - unsigned long tsc, tmp; + unsigned long tmp; unsigned product[3]; /* 96-bit intermediate value */ /* cnt32_to_63() is not safe with preemption */ preempt_disable(); - /* read the TSC value - */ - tsc = get_cycles(); - - /* expand to 64-bits. + /* expand the tsc to 64-bits. * - sched_clock() must be called once a minute or better or the * following will go horribly wrong - see cnt32_to_63() */ - tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL; + tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL; preempt_enable(); diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index 5024f643b3b1..d7d94b845dc2 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -75,9 +75,6 @@ static void cpu_unmask_irq(unsigned int irq) smp_send_all_nop(); } -void no_ack_irq(unsigned int irq) { } -void no_end_irq(unsigned int irq) { } - void cpu_ack_irq(unsigned int irq) { unsigned long mask = EIEM_MASK(irq); @@ -241,7 +238,7 @@ int cpu_claim_irq(unsigned int irq, struct irq_chip *type, void *data) /* for iosapic interrupts */ if (type) { - set_irq_chip_and_handler(irq, type, handle_level_irq); + set_irq_chip_and_handler(irq, type, handle_percpu_irq); set_irq_chip_data(irq, data); cpu_unmask_irq(irq); } @@ -392,7 +389,7 @@ static void claim_cpu_irqs(void) int i; for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) { set_irq_chip_and_handler(i, &cpu_interrupt_type, - handle_level_irq); + handle_percpu_irq); } set_irq_handler(TIMER_IRQ, handle_percpu_irq); diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c index 35c827e94e31..609a331878e7 100644 --- a/arch/parisc/kernel/signal.c +++ b/arch/parisc/kernel/signal.c @@ -98,7 +98,6 @@ void sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) { struct rt_sigframe __user *frame; - struct siginfo si; sigset_t set; unsigned long usp = (regs->gr[30] & ~(0x01UL)); unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE; @@ -178,13 +177,7 @@ sys_rt_sigreturn(struct pt_regs *regs, int in_syscall) give_sigsegv: DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n"); - si.si_signo = SIGSEGV; - si.si_errno = 0; - si.si_code = SI_KERNEL; - si.si_pid = task_pid_vnr(current); - si.si_uid = current_uid(); - si.si_addr = &frame->uc; - force_sig_info(SIGSEGV, &si, current); + force_sig(SIGSEGV, current); return; } diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts index 05a76ccfd499..697b3f6b78bf 100644 --- a/arch/powerpc/boot/dts/mpc8308_p1m.dts +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -297,6 +297,14 @@ interrupt-parent = < &ipic >; }; + dma@2c000 { + compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + }; pci0: pcie@e0009000 { diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts index a97eb2db5a18..d3db02f98ddd 100644 --- a/arch/powerpc/boot/dts/mpc8308rdb.dts +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -265,6 +265,14 @@ interrupt-parent = < &ipic >; }; + dma@2c000 { + compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + }; pci0: pcie@e0009000 { diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index fea833e18ad5..e0d703c7fdf7 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -63,6 +63,7 @@ #include <linux/of_gpio.h> #include <linux/kernel.h> #include <linux/slab.h> +#include <linux/fs.h> #include <linux/watchdog.h> #include <linux/miscdevice.h> #include <linux/uaccess.h> diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 956154f32cfe..20576829eca5 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -313,13 +313,14 @@ config OF_RTC source "arch/powerpc/sysdev/bestcomm/Kconfig" config MPC8xxx_GPIO - bool "MPC8xxx GPIO support" - depends on PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || FSL_SOC_BOOKE || PPC_86xx + bool "MPC512x/MPC8xxx GPIO support" + depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \ + FSL_SOC_BOOKE || PPC_86xx select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help Say Y here if you're going to use hardware that connects to the - MPC831x/834x/837x/8572/8610 GPIOs. + MPC512x/831x/834x/837x/8572/8610 GPIOs. config SIMPLE_GPIO bool "Support for simple, memory-mapped GPIO controllers" diff --git a/arch/powerpc/sysdev/mpc8xxx_gpio.c b/arch/powerpc/sysdev/mpc8xxx_gpio.c index c0ea05e87f1d..c48cd8178079 100644 --- a/arch/powerpc/sysdev/mpc8xxx_gpio.c +++ b/arch/powerpc/sysdev/mpc8xxx_gpio.c @@ -1,5 +1,5 @@ /* - * GPIOs on MPC8349/8572/8610 and compatible + * GPIOs on MPC512x/8349/8572/8610 and compatible * * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk> * @@ -26,6 +26,7 @@ #define GPIO_IER 0x0c #define GPIO_IMR 0x10 #define GPIO_ICR 0x14 +#define GPIO_ICR2 0x18 struct mpc8xxx_gpio_chip { struct of_mm_gpio_chip mm_gc; @@ -37,6 +38,7 @@ struct mpc8xxx_gpio_chip { */ u32 data; struct irq_host *irq; + void *of_dev_id_data; }; static inline u32 mpc8xxx_gpio2mask(unsigned int gpio) @@ -215,6 +217,51 @@ static int mpc8xxx_irq_set_type(unsigned int virq, unsigned int flow_type) return 0; } +static int mpc512x_irq_set_type(unsigned int virq, unsigned int flow_type) +{ + struct mpc8xxx_gpio_chip *mpc8xxx_gc = get_irq_chip_data(virq); + struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc; + unsigned long gpio = virq_to_hw(virq); + void __iomem *reg; + unsigned int shift; + unsigned long flags; + + if (gpio < 16) { + reg = mm->regs + GPIO_ICR; + shift = (15 - gpio) * 2; + } else { + reg = mm->regs + GPIO_ICR2; + shift = (15 - (gpio % 16)) * 2; + } + + switch (flow_type) { + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_LEVEL_LOW: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrsetbits_be32(reg, 3 << shift, 2 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_LEVEL_HIGH: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrsetbits_be32(reg, 3 << shift, 1 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + case IRQ_TYPE_EDGE_BOTH: + spin_lock_irqsave(&mpc8xxx_gc->lock, flags); + clrbits32(reg, 3 << shift); + spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags); + break; + + default: + return -EINVAL; + } + + return 0; +} + static struct irq_chip mpc8xxx_irq_chip = { .name = "mpc8xxx-gpio", .unmask = mpc8xxx_irq_unmask, @@ -226,6 +273,11 @@ static struct irq_chip mpc8xxx_irq_chip = { static int mpc8xxx_gpio_irq_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { + struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data; + + if (mpc8xxx_gc->of_dev_id_data) + mpc8xxx_irq_chip.set_type = mpc8xxx_gc->of_dev_id_data; + set_irq_chip_data(virq, h->host_data); set_irq_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq); set_irq_type(virq, IRQ_TYPE_NONE); @@ -253,11 +305,20 @@ static struct irq_host_ops mpc8xxx_gpio_irq_ops = { .xlate = mpc8xxx_gpio_irq_xlate, }; +static struct of_device_id mpc8xxx_gpio_ids[] __initdata = { + { .compatible = "fsl,mpc8349-gpio", }, + { .compatible = "fsl,mpc8572-gpio", }, + { .compatible = "fsl,mpc8610-gpio", }, + { .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, }, + {} +}; + static void __init mpc8xxx_add_controller(struct device_node *np) { struct mpc8xxx_gpio_chip *mpc8xxx_gc; struct of_mm_gpio_chip *mm_gc; struct gpio_chip *gc; + const struct of_device_id *id; unsigned hwirq; int ret; @@ -297,6 +358,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) if (!mpc8xxx_gc->irq) goto skip_irq; + id = of_match_node(mpc8xxx_gpio_ids, np); + if (id) + mpc8xxx_gc->of_dev_id_data = id->data; + mpc8xxx_gc->irq->host_data = mpc8xxx_gc; /* ack and mask all irqs */ @@ -321,13 +386,7 @@ static int __init mpc8xxx_add_gpiochips(void) { struct device_node *np; - for_each_compatible_node(np, NULL, "fsl,mpc8349-gpio") - mpc8xxx_add_controller(np); - - for_each_compatible_node(np, NULL, "fsl,mpc8572-gpio") - mpc8xxx_add_controller(np); - - for_each_compatible_node(np, NULL, "fsl,mpc8610-gpio") + for_each_matching_node(np, mpc8xxx_gpio_ids) mpc8xxx_add_controller(np); for_each_compatible_node(np, NULL, "fsl,qoriq-gpio") diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 56c8687b29b3..7eff9b7347c0 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -19,6 +19,7 @@ #include <linux/kernel_stat.h> #include <linux/rcupdate.h> #include <linux/posix-timers.h> +#include <linux/cpu.h> #include <asm/s390_ext.h> #include <asm/timer.h> @@ -566,6 +567,23 @@ void init_cpu_vtimer(void) __ctl_set_bit(0,10); } +static int __cpuinit s390_nohz_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + struct s390_idle_data *idle; + long cpu = (long) hcpu; + + idle = &per_cpu(s390_idle, cpu); + switch (action) { + case CPU_DYING: + case CPU_DYING_FROZEN: + idle->nohz_delay = 0; + default: + break; + } + return NOTIFY_OK; +} + void __init vtime_init(void) { /* request the cpu timer external interrupt */ @@ -574,5 +592,6 @@ void __init vtime_init(void) /* Enable cpu timer interrupts on the boot cpu. */ init_cpu_vtimer(); + cpu_notifier(s390_nohz_notify, 0); } diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 7f217b3a50a8..2e9d78d21fd3 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -22,7 +22,8 @@ config SUPERH select HAVE_SPARSE_IRQ select RTC_LIB select GENERIC_ATOMIC64 - select GENERIC_HARDIRQS_NO_DEPRECATED + # Support the deprecated APIs until MFD and GPIOLIB catch up. + select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 2eaeb9e59585..f48c492a68d3 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -720,32 +720,6 @@ static struct platform_device camera_devices[] = { }; /* FSI */ -/* - * FSI-B use external clock which came from da7210. - * So, we should change parent of fsi - */ -#define FCLKBCR 0xa415000c -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimckb_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKBCR, - .rate = 0, /* unknown */ -}; - static struct sh_fsi_platform_info fsi_info = { .portb_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | @@ -1264,10 +1238,10 @@ static int __init arch_setup(void) /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); if (!IS_ERR(clk)) { - clk_register(&fsimckb_clk); - clk_set_parent(clk, &fsimckb_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimckb_clk, 11000); + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimckb_clk, 48000); + clk_set_parent(clk, &sh7724_fsimckb_clk); + clk_set_rate(clk, 48000); clk_put(clk); } diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index d961949600fd..9070d7e60704 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -140,7 +140,7 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */ + __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */ /* FPGA System register setup*/ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c31d228fdfc6..527a0cd956b5 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -283,31 +283,6 @@ static struct platform_device ceu1_device = { }; /* FSI */ -/* - * FSI-A use external clock which came from ak464x. - * So, we should change parent of fsi - */ -#define FCLKACR 0xa4150008 -static void fsimck_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsimck_clk_ops = { - .init = fsimck_init, -}; - -static struct clk fsimcka_clk = { - .ops = &fsimck_clk_ops, - .enable_reg = (void __iomem *)FCLKACR, - .rate = 0, /* unknown */ -}; - /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | @@ -852,37 +827,29 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT0, NULL); /* enable FSI */ - gpio_request(GPIO_FN_FSIMCKB, NULL); gpio_request(GPIO_FN_FSIMCKA, NULL); + gpio_request(GPIO_FN_FSIIASD, NULL); gpio_request(GPIO_FN_FSIOASD, NULL); gpio_request(GPIO_FN_FSIIABCK, NULL); gpio_request(GPIO_FN_FSIIALRCK, NULL); gpio_request(GPIO_FN_FSIOABCK, NULL); gpio_request(GPIO_FN_FSIOALRCK, NULL); gpio_request(GPIO_FN_CLKAUDIOAO, NULL); - gpio_request(GPIO_FN_FSIIBSD, NULL); - gpio_request(GPIO_FN_FSIOBSD, NULL); - gpio_request(GPIO_FN_FSIIBBCK, NULL); - gpio_request(GPIO_FN_FSIIBLRCK, NULL); - gpio_request(GPIO_FN_FSIOBBCK, NULL); - gpio_request(GPIO_FN_FSIOBLRCK, NULL); - gpio_request(GPIO_FN_CLKAUDIOBO, NULL); - gpio_request(GPIO_FN_FSIIASD, NULL); /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 83333333)); clk_put(clk); } /* change parent of FSI A */ clk = clk_get(NULL, "fsia_clk"); - if (clk) { - clk_register(&fsimcka_clk); - clk_set_parent(clk, &fsimcka_clk); - clk_set_rate(clk, 11000); - clk_set_rate(&fsimcka_clk, 11000); + if (!IS_ERR(clk)) { + /* 48kHz dummy clock was used to make sure 1/1 divide */ + clk_set_rate(&sh7724_fsimcka_clk, 48000); + clk_set_parent(clk, &sh7724_fsimcka_clk); + clk_set_rate(clk, 48000); clk_put(clk); } diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h index 1f4e562c5e8c..82e1eabeac98 100644 --- a/arch/sh/include/asm/cacheflush.h +++ b/arch/sh/include/asm/cacheflush.h @@ -96,7 +96,7 @@ void kmap_coherent_init(void); void *kmap_coherent(struct page *page, unsigned long addr); void kunmap_coherent(void *kvaddr); -#define PG_dcache_dirty PG_arch_1 +#define PG_dcache_clean PG_arch_1 void cpu_cache_init(void); diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index 903cd618eb74..d6741fca89a4 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -368,8 +368,9 @@ #define __NR_sendmsg 355 #define __NR_recvmsg 356 #define __NR_recvmmsg 357 +#define __NR_accept4 358 -#define NR_syscalls 358 +#define NR_syscalls 359 #ifdef __KERNEL__ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 4c27b68789b3..7eb435999426 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -303,4 +303,7 @@ enum { SHDMA_SLAVE_SDHI1_RX, }; +extern struct clk sh7724_fsimcka_clk; +extern struct clk sh7724_fsimckb_clk; + #endif /* __ASM_SH7724_H__ */ diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c index b26264dc2aef..c509c40cba4b 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c @@ -34,7 +34,7 @@ static const int pfc_divisors[]={1,2,3,4,6,8,12}; static void master_clk_init(struct clk *clk) { - return 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; + clk->rate = 10000000 * PLL2 * pll1rate[(__raw_readw(FREQCR) >> 8) & 0x0007]; } static struct clk_ops sh7201_master_clk_ops = { diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c index b601fa3978d1..6282a839e08e 100644 --- a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c +++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c @@ -81,8 +81,7 @@ static void shoc_clk_init(struct clk *clk) for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) { int divisor = frqcr3_divisors[i]; - if (clk->ops->set_rate(clk, clk->parent->rate / - divisor, 0) == 0) + if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0) break; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 0fe2e9329cb2..271c0b325a9a 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -111,12 +111,21 @@ static struct clk div3_clk = { .parent = &pll_clk, }; +/* External input clock (pin name: FSIMCKA/FSIMCKB ) */ +struct clk sh7724_fsimcka_clk = { +}; + +struct clk sh7724_fsimckb_clk = { +}; + static struct clk *main_clks[] = { &r_clk, &extal_clk, &fll_clk, &pll_clk, &div3_clk, + &sh7724_fsimcka_clk, + &sh7724_fsimckb_clk, }; static void div4_kick(struct clk *clk) @@ -154,16 +163,38 @@ struct clk div4_clks[DIV4_NR] = { [DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT), }; -enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR }; +enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR }; static struct clk div6_clks[DIV6_NR] = { [DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0), - [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0), - [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0), [DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0), [DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT), }; +enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR }; + +/* Indices are important - they are the actual src selecting values */ +static struct clk *fclkacr_parent[] = { + [0] = &div3_clk, + [1] = NULL, + [2] = &sh7724_fsimcka_clk, + [3] = NULL, +}; + +static struct clk *fclkbcr_parent[] = { + [0] = &div3_clk, + [1] = NULL, + [2] = &sh7724_fsimckb_clk, + [3] = NULL, +}; + +static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { + [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0, + fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2), + [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0, + fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2), +}; + static struct clk mstp_clks[HWBLK_NR] = { SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT), SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT), @@ -240,8 +271,8 @@ static struct clk_lookup lookups[] = { /* DIV6 clocks */ CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]), - CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]), - CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]), + CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]), + CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]), CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]), CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]), @@ -376,6 +407,9 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) + ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR); + + if (!ret) ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR); return ret; diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index e872e81add8a..6fc347ebe59d 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -375,3 +375,4 @@ ENTRY(sys_call_table) .long sys_sendmsg /* 355 */ .long sys_recvmsg .long sys_recvmmsg + .long sys_accept4 diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 2cfae81914aa..92eb98633ab0 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -114,7 +114,7 @@ static void sh4_flush_dcache_page(void *arg) struct address_space *mapping = page_mapping(page); if (mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); else #endif flush_cache_one(CACHE_OC_ADDRESS_ARRAY | @@ -239,7 +239,7 @@ static void sh4_flush_cache_page(void *args) * another ASID than the current one. */ map_coherent = (current_cpu_data.dcache.n_aliases && - !test_bit(PG_dcache_dirty, &page->flags) && + test_bit(PG_dcache_clean, &page->flags) && page_mapped(page)); if (map_coherent) vaddr = kmap_coherent(page, address); diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index f498da1cce7a..7729cca727eb 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -139,7 +139,7 @@ static void sh7705_flush_dcache_page(void *arg) struct address_space *mapping = page_mapping(page); if (mapping && !mapping_mapped(mapping)) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); else __flush_dcache_page(__pa(page_address(page))); } diff --git a/arch/sh/mm/cache.c b/arch/sh/mm/cache.c index ba401d137bb9..88d3dc3d30d5 100644 --- a/arch/sh/mm/cache.c +++ b/arch/sh/mm/cache.c @@ -60,14 +60,14 @@ void copy_to_user_page(struct vm_area_struct *vma, struct page *page, unsigned long len) { if (boot_cpu_data.dcache.n_aliases && page_mapped(page) && - !test_bit(PG_dcache_dirty, &page->flags)) { + test_bit(PG_dcache_clean, &page->flags)) { void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); memcpy(vto, src, len); kunmap_coherent(vto); } else { memcpy(dst, src, len); if (boot_cpu_data.dcache.n_aliases) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); } if (vma->vm_flags & VM_EXEC) @@ -79,14 +79,14 @@ void copy_from_user_page(struct vm_area_struct *vma, struct page *page, unsigned long len) { if (boot_cpu_data.dcache.n_aliases && page_mapped(page) && - !test_bit(PG_dcache_dirty, &page->flags)) { + test_bit(PG_dcache_clean, &page->flags)) { void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); memcpy(dst, vfrom, len); kunmap_coherent(vfrom); } else { memcpy(dst, src, len); if (boot_cpu_data.dcache.n_aliases) - set_bit(PG_dcache_dirty, &page->flags); + clear_bit(PG_dcache_clean, &page->flags); } } @@ -98,7 +98,7 @@ void copy_user_highpage(struct page *to, struct page *from, vto = kmap_atomic(to, KM_USER1); if (boot_cpu_data.dcache.n_aliases && page_mapped(from) && - !test_bit(PG_dcache_dirty, &from->flags)) { + test_bit(PG_dcache_clean, &from->flags)) { vfrom = kmap_coherent(from, vaddr); copy_page(vto, vfrom); kunmap_coherent(vfrom); @@ -141,7 +141,7 @@ void __update_cache(struct vm_area_struct *vma, page = pfn_to_page(pfn); if (pfn_valid(pfn)) { - int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags); + int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags); if (dirty) __flush_purge_region(page_address(page), PAGE_SIZE); } @@ -153,7 +153,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr) if (pages_do_alias(addr, vmaddr)) { if (boot_cpu_data.dcache.n_aliases && page_mapped(page) && - !test_bit(PG_dcache_dirty, &page->flags)) { + test_bit(PG_dcache_clean, &page->flags)) { void *kaddr; kaddr = kmap_coherent(page, vmaddr); diff --git a/arch/sh/mm/kmap.c b/arch/sh/mm/kmap.c index 15d74ea42094..ec29e14ec5a8 100644 --- a/arch/sh/mm/kmap.c +++ b/arch/sh/mm/kmap.c @@ -34,7 +34,7 @@ void *kmap_coherent(struct page *page, unsigned long addr) enum fixed_addresses idx; unsigned long vaddr; - BUG_ON(test_bit(PG_dcache_dirty, &page->flags)); + BUG_ON(!test_bit(PG_dcache_clean, &page->flags)); pagefault_disable(); diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h index 81cd43432dc0..47eaafad15ce 100644 --- a/arch/sparc/include/asm/openprom.h +++ b/arch/sparc/include/asm/openprom.h @@ -39,7 +39,7 @@ struct linux_dev_v2_funcs { int (*v2_dev_open)(char *devpath); void (*v2_dev_close)(int d); int (*v2_dev_read)(int d, char *buf, int nbytes); - int (*v2_dev_write)(int d, char *buf, int nbytes); + int (*v2_dev_write)(int d, const char *buf, int nbytes); int (*v2_dev_seek)(int d, int hi, int lo); /* Never issued (multistage load support) */ diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index 51296a6f5005..9e5c64084b86 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -60,25 +60,6 @@ extern char *prom_getbootargs(void); extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ @@ -121,19 +102,8 @@ extern int prom_getrev(void); /* Get the prom firmware revision. */ extern int prom_getprev(void); -/* Character operations to/from the console.... */ - -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - -/* Blocking get character from console. */ -extern char prom_getchar(void); - -/* Blocking put character to console. */ -extern void prom_putchar(char character); +/* Write a buffer of characters to the console. */ +extern void prom_console_write_buf(const char *buf, int len); /* Prom's internal routines, don't use in kernel/boot code. */ extern void prom_printf(const char *fmt, ...); @@ -238,7 +208,6 @@ extern int prom_node_has_property(phandle node, char *property); extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); -extern phandle prom_pathtoinode(char *path); extern phandle prom_inst2pkg(int); /* Dorking with Bus ranges... */ diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h index c9cc078e3e31..8cd0df34e82b 100644 --- a/arch/sparc/include/asm/oplib_64.h +++ b/arch/sparc/include/asm/oplib_64.h @@ -67,27 +67,6 @@ extern void prom_init(void *cif_handler, void *cif_stack); /* Boot argument acquisition, returns the boot command line string. */ extern char *prom_getbootargs(void); -/* Device utilities. */ - -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(const char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - /* Miscellaneous routines, don't really fit in any category per se. */ /* Reboot the machine with the command line passed. */ @@ -109,33 +88,14 @@ extern void prom_halt(void) __attribute__ ((noreturn)); /* Halt and power-off the machine. */ extern void prom_halt_power_off(void) __attribute__ ((noreturn)); -/* Set the PROM 'sync' callback function to the passed function pointer. - * When the user gives the 'sync' command at the prom prompt while the - * kernel is still active, the prom will call this routine. - * - */ -typedef int (*callback_func_t)(long *cmd); -extern void prom_setcallback(callback_func_t func_ptr); - /* Acquire the IDPROM of the root node in the prom device tree. This * gets passed a buffer where you would like it stuffed. The return value * is the format type of this idprom or 0xff on error. */ extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); -/* Character operations to/from the console.... */ - -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - -/* Blocking get character from console. */ -extern char prom_getchar(void); - -/* Blocking put character to console. */ -extern void prom_putchar(char character); +/* Write a buffer of characters to the console. */ +extern void prom_console_write_buf(const char *buf, int len); /* Prom's internal routines, don't use in kernel/boot code. */ extern void prom_printf(const char *fmt, ...); @@ -279,9 +239,7 @@ extern phandle prom_finddevice(const char *name); extern int prom_setprop(phandle node, const char *prop_name, char *prop_value, int value_size); -extern phandle prom_pathtoinode(const char *path); extern phandle prom_inst2pkg(int); -extern int prom_service_exists(const char *service_name); extern void prom_sun4v_guest_soft_state(void); extern int prom_ihandle2path(int handle, char *buffer, int bufsize); diff --git a/arch/sparc/kernel/leon_kernel.c b/arch/sparc/kernel/leon_kernel.c index 2d51527d810f..f01c42661ee5 100644 --- a/arch/sparc/kernel/leon_kernel.c +++ b/arch/sparc/kernel/leon_kernel.c @@ -114,7 +114,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) if (leon3_gptimer_regs && leon3_irqctrl_regs) { LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld, - (((1000000 / 100) - 1))); + (((1000000 / HZ) - 1))); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0); #ifdef CONFIG_SMP @@ -128,7 +128,7 @@ void __init leon_init_timers(irq_handler_t counter_fn) } LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0); - LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1))); + LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1))); LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0); # endif diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile index 1b8c073adb44..816c0fa12dc0 100644 --- a/arch/sparc/prom/Makefile +++ b/arch/sparc/prom/Makefile @@ -6,7 +6,6 @@ ccflags := -Werror lib-y := bootstr_$(BITS).o lib-$(CONFIG_SPARC32) += devmap.o -lib-y += devops_$(BITS).o lib-y += init_$(BITS).o lib-$(CONFIG_SPARC32) += memory.o lib-y += misc_$(BITS).o diff --git a/arch/sparc/prom/console_32.c b/arch/sparc/prom/console_32.c index 5340264b78f5..48863108a44c 100644 --- a/arch/sparc/prom/console_32.c +++ b/arch/sparc/prom/console_32.c @@ -16,63 +16,26 @@ extern void restore_current(void); -/* Non blocking get character from console input device, returns -1 - * if no input was taken. This can be used for polling. - */ -int -prom_nbgetchar(void) -{ - static char inc; - int i = -1; - unsigned long flags; - - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - i = (*(romvec->pv_nbgetchar))(); - break; - case PROM_V2: - case PROM_V3: - if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) { - i = inc; - } else { - i = -1; - } - break; - default: - i = -1; - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - return i; /* Ugh, we could spin forever on unsupported proms ;( */ -} - /* Non blocking put character to console device, returns -1 if * unsuccessful. */ -int -prom_nbputchar(char c) +static int prom_nbputchar(const char *buf) { - static char outc; unsigned long flags; int i = -1; spin_lock_irqsave(&prom_lock, flags); switch(prom_vers) { case PROM_V0: - i = (*(romvec->pv_nbputchar))(c); + i = (*(romvec->pv_nbputchar))(*buf); break; case PROM_V2: case PROM_V3: - outc = c; - if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1) + if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, + buf, 0x1) == 1) i = 0; - else - i = -1; break; default: - i = -1; break; }; restore_current(); @@ -80,18 +43,14 @@ prom_nbputchar(char c) return i; /* Ugh, we could spin forever on unsupported proms ;( */ } -/* Blocking version of get character routine above. */ -char -prom_getchar(void) +void prom_console_write_buf(const char *buf, int len) { - int character; - while((character = prom_nbgetchar()) == -1) ; - return (char) character; + while (len) { + int n = prom_nbputchar(buf); + if (n) + continue; + len--; + buf++; + } } -/* Blocking version of put character routine above. */ -void -prom_putchar(char c) -{ - while(prom_nbputchar(c) == -1) ; -} diff --git a/arch/sparc/prom/console_64.c b/arch/sparc/prom/console_64.c index 10322dc2f557..ed39e75828bd 100644 --- a/arch/sparc/prom/console_64.c +++ b/arch/sparc/prom/console_64.c @@ -15,85 +15,34 @@ extern int prom_stdin, prom_stdout; -/* Non blocking get character from console input device, returns -1 - * if no input was taken. This can be used for polling. - */ -inline int -prom_nbgetchar(void) -{ - unsigned long args[7]; - char inc; - - args[0] = (unsigned long) "read"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) prom_stdin; - args[4] = (unsigned long) &inc; - args[5] = 1; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); - - if (args[6] == 1) - return inc; - return -1; -} - -/* Non blocking put character to console device, returns -1 if - * unsuccessful. - */ -inline int -prom_nbputchar(char c) +static int __prom_console_write_buf(const char *buf, int len) { unsigned long args[7]; - char outc; - - outc = c; + int ret; args[0] = (unsigned long) "write"; args[1] = 3; args[2] = 1; args[3] = (unsigned int) prom_stdout; - args[4] = (unsigned long) &outc; - args[5] = 1; + args[4] = (unsigned long) buf; + args[5] = (unsigned int) len; args[6] = (unsigned long) -1; p1275_cmd_direct(args); - if (args[6] == 1) - return 0; - else + ret = (int) args[6]; + if (ret < 0) return -1; + return ret; } -/* Blocking version of get character routine above. */ -char -prom_getchar(void) -{ - int character; - while((character = prom_nbgetchar()) == -1) ; - return (char) character; -} - -/* Blocking version of put character routine above. */ -void -prom_putchar(char c) +void prom_console_write_buf(const char *buf, int len) { - prom_nbputchar(c); -} - -void -prom_puts(const char *s, int len) -{ - unsigned long args[7]; - - args[0] = (unsigned long) "write"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) prom_stdout; - args[4] = (unsigned long) s; - args[5] = len; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); + while (len) { + int n = __prom_console_write_buf(buf, len); + if (n < 0) + continue; + len -= n; + buf += len; + } } diff --git a/arch/sparc/prom/devops_32.c b/arch/sparc/prom/devops_32.c deleted file mode 100644 index 9c5d4687242a..000000000000 --- a/arch/sparc/prom/devops_32.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * devops.c: Device operations using the PROM. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> - -#include <asm/openprom.h> -#include <asm/oplib.h> - -extern void restore_current(void); - -/* Open the device described by the string 'dstr'. Returns the handle - * to that device used for subsequent operations on that device. - * Returns -1 on failure. - */ -int -prom_devopen(char *dstr) -{ - int handle; - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - handle = (*(romvec->pv_v0devops.v0_devopen))(dstr); - if(handle == 0) handle = -1; - break; - case PROM_V2: - case PROM_V3: - handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr); - break; - default: - handle = -1; - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - - return handle; -} - -/* Close the device described by device handle 'dhandle'. */ -int -prom_devclose(int dhandle) -{ - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - (*(romvec->pv_v0devops.v0_devclose))(dhandle); - break; - case PROM_V2: - case PROM_V3: - (*(romvec->pv_v2devops.v2_dev_close))(dhandle); - break; - default: - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); - return 0; -} - -/* Seek to specified location described by 'seekhi' and 'seeklo' - * for device 'dhandle'. - */ -void -prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo) -{ - unsigned long flags; - spin_lock_irqsave(&prom_lock, flags); - switch(prom_vers) { - case PROM_V0: - (*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo); - break; - case PROM_V2: - case PROM_V3: - (*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo); - break; - default: - break; - }; - restore_current(); - spin_unlock_irqrestore(&prom_lock, flags); -} diff --git a/arch/sparc/prom/devops_64.c b/arch/sparc/prom/devops_64.c deleted file mode 100644 index a017119e7ef1..000000000000 --- a/arch/sparc/prom/devops_64.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * devops.c: Device operations using the PROM. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> - -#include <asm/openprom.h> -#include <asm/oplib.h> - -/* Open the device described by the string 'dstr'. Returns the handle - * to that device used for subsequent operations on that device. - * Returns 0 on failure. - */ -int -prom_devopen(const char *dstr) -{ - unsigned long args[5]; - - args[0] = (unsigned long) "open"; - args[1] = 1; - args[2] = 1; - args[3] = (unsigned long) dstr; - args[4] = (unsigned long) -1; - - p1275_cmd_direct(args); - - return (int) args[4]; -} - -/* Close the device described by device handle 'dhandle'. */ -int -prom_devclose(int dhandle) -{ - unsigned long args[4]; - - args[0] = (unsigned long) "close"; - args[1] = 1; - args[2] = 0; - args[3] = (unsigned int) dhandle; - - p1275_cmd_direct(args); - - return 0; -} - -/* Seek to specified location described by 'seekhi' and 'seeklo' - * for device 'dhandle'. - */ -void -prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo) -{ - unsigned long args[7]; - - args[0] = (unsigned long) "seek"; - args[1] = 3; - args[2] = 1; - args[3] = (unsigned int) dhandle; - args[4] = seekhi; - args[5] = seeklo; - args[6] = (unsigned long) -1; - - p1275_cmd_direct(args); -} diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c index d24bc44e361e..e4f31d4d3715 100644 --- a/arch/sparc/prom/misc_64.c +++ b/arch/sparc/prom/misc_64.c @@ -18,7 +18,7 @@ #include <asm/system.h> #include <asm/ldc.h> -int prom_service_exists(const char *service_name) +static int prom_service_exists(const char *service_name) { unsigned long args[5]; @@ -150,20 +150,6 @@ void prom_halt_power_off(void) prom_halt(); } -/* Set prom sync handler to call function 'funcp'. */ -void prom_setcallback(callback_func_t funcp) -{ - unsigned long args[5]; - if (!funcp) - return; - args[0] = (unsigned long) "set-callback"; - args[1] = 1; - args[2] = 1; - args[3] = (unsigned long) funcp; - args[4] = (unsigned long) -1; - p1275_cmd_direct(args); -} - /* Get the idprom and stuff it into buffer 'idbuf'. Returns the * format type. 'num_bytes' is the number of bytes that your idbuf * has space for. Returns 0xff on error. diff --git a/arch/sparc/prom/printf.c b/arch/sparc/prom/printf.c index ca869266b9f3..d9682f06b3b0 100644 --- a/arch/sparc/prom/printf.c +++ b/arch/sparc/prom/printf.c @@ -15,22 +15,45 @@ #include <linux/kernel.h> #include <linux/compiler.h> +#include <linux/spinlock.h> #include <asm/openprom.h> #include <asm/oplib.h> +#define CONSOLE_WRITE_BUF_SIZE 1024 + static char ppbuf[1024]; +static char console_write_buf[CONSOLE_WRITE_BUF_SIZE]; +static DEFINE_RAW_SPINLOCK(console_write_lock); void notrace prom_write(const char *buf, unsigned int n) { - char ch; + unsigned int dest_len; + unsigned long flags; + char *dest; + + dest = console_write_buf; + raw_spin_lock_irqsave(&console_write_lock, flags); - while (n != 0) { - --n; - if ((ch = *buf++) == '\n') - prom_putchar('\r'); - prom_putchar(ch); + dest_len = 0; + while (n-- != 0) { + char ch = *buf++; + if (ch == '\n') { + *dest++ = '\r'; + dest_len++; + } + *dest++ = ch; + dest_len++; + if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) { + prom_console_write_buf(console_write_buf, dest_len); + dest = console_write_buf; + dest_len = 0; + } } + if (dest_len) + prom_console_write_buf(console_write_buf, dest_len); + + raw_spin_unlock_irqrestore(&console_write_lock, flags); } void notrace prom_printf(const char *fmt, ...) diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c index 63e08e149774..535e2e69ac1d 100644 --- a/arch/sparc/prom/tree_32.c +++ b/arch/sparc/prom/tree_32.c @@ -342,19 +342,3 @@ phandle prom_inst2pkg(int inst) if (node == -1) return 0; return node; } - -/* Return 'node' assigned to a particular prom 'path' - * FIXME: Should work for v0 as well - */ -phandle prom_pathtoinode(char *path) -{ - phandle node; - int inst; - - inst = prom_devopen (path); - if (inst == -1) return 0; - node = prom_inst2pkg (inst); - prom_devclose (inst); - if (node == -1) return 0; - return node; -} diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c index 691be68932f8..d93660048376 100644 --- a/arch/sparc/prom/tree_64.c +++ b/arch/sparc/prom/tree_64.c @@ -374,24 +374,6 @@ inline phandle prom_inst2pkg(int inst) return node; } -/* Return 'node' assigned to a particular prom 'path' - * FIXME: Should work for v0 as well - */ -phandle prom_pathtoinode(const char *path) -{ - phandle node; - int inst; - - inst = prom_devopen (path); - if (inst == 0) - return 0; - node = prom_inst2pkg(inst); - prom_devclose(inst); - if (node == -1) - return 0; - return node; -} - int prom_ihandle2path(int handle, char *buffer, int bufsize) { unsigned long args[7]; diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h index c1ee1d61d44c..81d92a45cd4b 100644 --- a/arch/tile/include/asm/signal.h +++ b/arch/tile/include/asm/signal.h @@ -25,7 +25,7 @@ #if defined(__KERNEL__) && !defined(__ASSEMBLY__) struct pt_regs; -int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *); +int restore_sigcontext(struct pt_regs *, struct sigcontext __user *); int setup_sigcontext(struct sigcontext __user *, struct pt_regs *); void do_signal(struct pt_regs *regs); #endif diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c index 543d6a33aa26..dbb0dfc7bece 100644 --- a/arch/tile/kernel/compat_signal.c +++ b/arch/tile/kernel/compat_signal.c @@ -290,12 +290,12 @@ long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr, return ret; } +/* The assembly shim for this function arranges to ignore the return value. */ long compat_sys_rt_sigreturn(struct pt_regs *regs) { struct compat_rt_sigframe __user *frame = (struct compat_rt_sigframe __user *) compat_ptr(regs->sp); sigset_t set; - long r0; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; @@ -308,13 +308,13 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) goto badframe; if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0) goto badframe; - return r0; + return 0; badframe: force_sig(SIGSEGV, current); diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index f5821626247f..5eed4a02bf62 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -1342,8 +1342,8 @@ handle_syscall: lw r20, r20 /* Jump to syscall handler. */ - jalr r20; .Lhandle_syscall_link: - FEEDBACK_REENTER(handle_syscall) + jalr r20 +.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */ /* * Write our r0 onto the stack so it gets restored instead @@ -1352,6 +1352,9 @@ handle_syscall: PTREGS_PTR(r29, PTREGS_OFFSET_REG(0)) sw r29, r0 +.Lsyscall_sigreturn_skip: + FEEDBACK_REENTER(handle_syscall) + /* Do syscall trace again, if requested. */ lw r30, r31 andi r30, r30, _TIF_SYSCALL_TRACE @@ -1536,9 +1539,24 @@ STD_ENTRY_LOCAL(bad_intr) }; \ STD_ENDPROC(_##x) +/* + * Special-case sigreturn to not write r0 to the stack on return. + * This is technically more efficient, but it also avoids difficulties + * in the 64-bit OS when handling 32-bit compat code, since we must not + * sign-extend r0 for the sigreturn return-value case. + */ +#define PTREGS_SYSCALL_SIGRETURN(x, reg) \ + STD_ENTRY(_##x); \ + addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \ + { \ + PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \ + j x \ + }; \ + STD_ENDPROC(_##x) + PTREGS_SYSCALL(sys_execve, r3) PTREGS_SYSCALL(sys_sigaltstack, r2) -PTREGS_SYSCALL(sys_rt_sigreturn, r0) +PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0) PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1) /* Save additional callee-saves to pt_regs, put address in r4 and jump. */ diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c index 8430f45daea6..e90eb53173b0 100644 --- a/arch/tile/kernel/process.c +++ b/arch/tile/kernel/process.c @@ -212,6 +212,13 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, childregs->sp = sp; /* override with new user stack pointer */ /* + * If CLONE_SETTLS is set, set "tp" in the new task to "r4", + * which is passed in as arg #5 to sys_clone(). + */ + if (clone_flags & CLONE_SETTLS) + childregs->tp = regs->regs[4]; + + /* * Copy the callee-saved registers from the passed pt_regs struct * into the context-switch callee-saved registers area. * This way when we start the interrupt-return sequence, the @@ -539,6 +546,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev, return __switch_to(prev, next, next_current_ksp0(next)); } +/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */ SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp, void __user *, parent_tidptr, void __user *, child_tidptr, struct pt_regs *, regs) diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c index 757407e36696..1260321155f1 100644 --- a/arch/tile/kernel/signal.c +++ b/arch/tile/kernel/signal.c @@ -52,7 +52,7 @@ SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss, */ int restore_sigcontext(struct pt_regs *regs, - struct sigcontext __user *sc, long *pr0) + struct sigcontext __user *sc) { int err = 0; int i; @@ -75,17 +75,15 @@ int restore_sigcontext(struct pt_regs *regs, regs->faultnum = INT_SWINT_1_SIGRETURN; - err |= __get_user(*pr0, &sc->gregs[0]); return err; } -/* sigreturn() returns long since it restores r0 in the interrupted code. */ +/* The assembly shim for this function arranges to ignore the return value. */ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs) { struct rt_sigframe __user *frame = (struct rt_sigframe __user *)(regs->sp); sigset_t set; - long r0; if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) goto badframe; @@ -98,13 +96,13 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs) recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); - if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0)) + if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) goto badframe; if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT) goto badframe; - return r0; + return 0; badframe: force_sig(SIGSEGV, current); diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 23f315c9f215..325c05294fc4 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -355,7 +355,7 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap, if (heap > 0x3fffffffffffUL) error("Destination address too large"); #else - if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff)) + if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) error("Destination address too large"); #endif #ifndef CONFIG_RELOCATABLE diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c index cbcc8d8ea93a..7a6e68e4f748 100644 --- a/arch/x86/crypto/ghash-clmulni-intel_glue.c +++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c @@ -10,6 +10,7 @@ * by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/module.h> #include <linux/init.h> #include <linux/kernel.h> diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 5be1542fbfaf..e99d55d74df5 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -72,6 +72,9 @@ struct e820map { #define BIOS_BEGIN 0x000a0000 #define BIOS_END 0x00100000 +#define BIOS_ROM_BASE 0xffe00000 +#define BIOS_ROM_END 0xffffffff + #ifdef __KERNEL__ /* see comment in arch/x86/kernel/e820.c */ extern struct e820map e820; diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 9e6fe391094e..f702f82aa1eb 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -79,7 +79,7 @@ #define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT) #define KVM_MIN_FREE_MMU_PAGES 5 #define KVM_REFILL_PAGES 25 -#define KVM_MAX_CPUID_ENTRIES 40 +#define KVM_MAX_CPUID_ENTRIES 80 #define KVM_NR_FIXED_MTRR_REGION 88 #define KVM_NR_VAR_MTRR 8 diff --git a/arch/x86/include/asm/pvclock.h b/arch/x86/include/asm/pvclock.h index 7f7e577a0e39..31d84acc1512 100644 --- a/arch/x86/include/asm/pvclock.h +++ b/arch/x86/include/asm/pvclock.h @@ -11,6 +11,7 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src); void pvclock_read_wallclock(struct pvclock_wall_clock *wall, struct pvclock_vcpu_time_info *vcpu, struct timespec *ts); +void pvclock_resume(void); /* * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 9e13763b6092..1e994754d323 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -45,6 +45,7 @@ obj-y += pci-dma.o quirks.o i8237.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o +obj-y += resource.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o obj-y += process.o diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 3f838d537392..78218135b48e 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1389,6 +1389,14 @@ void __cpuinit end_local_APIC_setup(void) setup_apic_nmi_watchdog(NULL); apic_pm_activate(); + + /* + * Now that local APIC setup is completed for BP, configure the fault + * handling for interrupt remapping. + */ + if (!smp_processor_id() && intr_remapping_enabled) + enable_drhd_fault_handling(); + } #ifdef CONFIG_X86_X2APIC diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 7cc0a721f628..fadcd743a74f 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2430,13 +2430,12 @@ static void ack_apic_level(struct irq_data *data) { struct irq_cfg *cfg = data->chip_data; int i, do_unmask_irq = 0, irq = data->irq; - struct irq_desc *desc = irq_to_desc(irq); unsigned long v; irq_complete_move(cfg); #ifdef CONFIG_GENERIC_PENDING_IRQ /* If we are moving the irq we need to mask it */ - if (unlikely(desc->status & IRQ_MOVE_PENDING)) { + if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) { do_unmask_irq = 1; mask_ioapic(cfg); } @@ -3413,6 +3412,7 @@ dmar_msi_set_affinity(struct irq_data *data, const struct cpumask *mask, msg.data |= MSI_DATA_VECTOR(cfg->vector); msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; msg.address_lo |= MSI_ADDR_DEST_ID(dest); + msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest); dmar_msi_write(irq, &msg); diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c index f9e4e6a54073..d8c4a6feb286 100644 --- a/arch/x86/kernel/apic/probe_64.c +++ b/arch/x86/kernel/apic/probe_64.c @@ -79,13 +79,6 @@ void __init default_setup_apic_routing(void) /* need to update phys_pkg_id */ apic->phys_pkg_id = apicid_phys_pkg_id; } - - /* - * Now that apic routing model is selected, configure the - * fault handling for intr remapping. - */ - if (intr_remapping_enabled) - enable_drhd_fault_handling(); } /* Same for both flat and physical. */ diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index bcece91dd311..c0dbd9ac24f0 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -60,16 +60,18 @@ #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD) #endif +/* Number of possible pages in the lowmem region */ +LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) + /* Enough space to fit pagetables for the low memory linear map */ -MAPPING_BEYOND_END = \ - PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT +MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT /* * Worst-case size of the kernel mapping we need to make: - * the worst-case size of the kernel itself, plus the extra we need - * to map for the linear map. + * a relocatable kernel can live anywhere in lowmem, so we need to be able + * to map all of lowmem. */ -KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT +KERNEL_PAGES = LOWMEM_PAGES INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm RESERVE_BRK(pagetables, INIT_MAP_SIZE) @@ -620,13 +622,13 @@ ENTRY(initial_code) __PAGE_ALIGNED_BSS .align PAGE_SIZE_asm #ifdef CONFIG_X86_PAE -initial_pg_pmd: +ENTRY(initial_pg_pmd) .fill 1024*KPMDS,4,0 #else ENTRY(initial_page_table) .fill 1024,4,0 #endif -initial_pg_fixmap: +ENTRY(initial_pg_fixmap) .fill 1024,4,0 ENTRY(empty_zero_page) .fill 4096,1,0 diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ae03cab4352e..4ff5968f12d2 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -27,6 +27,9 @@ #define HPET_DEV_FSB_CAP 0x1000 #define HPET_DEV_PERI_CAP 0x2000 +#define HPET_MIN_CYCLES 128 +#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1)) + #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt) /* @@ -299,8 +302,9 @@ static void hpet_legacy_clockevent_register(void) /* Calculate the min / max delta */ hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, &hpet_clockevent); - /* 5 usec minimum reprogramming delta. */ - hpet_clockevent.min_delta_ns = 5000; + /* Setup minimum reprogramming delta. */ + hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA, + &hpet_clockevent); /* * Start hpet with the boot cpu mask and make it @@ -393,22 +397,24 @@ static int hpet_next_event(unsigned long delta, * the wraparound into account) nor a simple count down event * mode. Further the write to the comparator register is * delayed internally up to two HPET clock cycles in certain - * chipsets (ATI, ICH9,10). We worked around that by reading - * back the compare register, but that required another - * workaround for ICH9,10 chips where the first readout after - * write can return the old stale value. We already have a - * minimum delta of 5us enforced, but a NMI or SMI hitting + * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even + * longer delays. We worked around that by reading back the + * compare register, but that required another workaround for + * ICH9,10 chips where the first readout after write can + * return the old stale value. We already had a minimum + * programming delta of 5us enforced, but a NMI or SMI hitting * between the counter readout and the comparator write can * move us behind that point easily. Now instead of reading * the compare register back several times, we make the ETIME * decision based on the following: Return ETIME if the - * counter value after the write is less than 8 HPET cycles + * counter value after the write is less than HPET_MIN_CYCLES * away from the event or if the counter is already ahead of - * the event. + * the event. The minimum programming delta for the generic + * clockevents code is set to 1.5 * HPET_MIN_CYCLES. */ res = (s32)(cnt - hpet_readl(HPET_COUNTER)); - return res < 8 ? -ETIME : 0; + return res < HPET_MIN_CYCLES ? -ETIME : 0; } static void hpet_legacy_set_mode(enum clock_event_mode mode, diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index dcb65cc0a053..1a1b606d3e92 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -364,8 +364,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, /* For performance reasons, reuse mc area when possible */ if (!mc || mc_size > curr_mc_size) { - if (mc) - vfree(mc); + vfree(mc); mc = vmalloc(mc_size); if (!mc) break; @@ -374,13 +373,11 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, if (get_ucode_data(mc, ucode_ptr, mc_size) || microcode_sanity_check(mc) < 0) { - vfree(mc); break; } if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) { - if (new_mc) - vfree(new_mc); + vfree(new_mc); new_rev = mc_header.rev; new_mc = mc; mc = NULL; /* trigger new vmalloc */ @@ -390,12 +387,10 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, leftover -= mc_size; } - if (mc) - vfree(mc); + vfree(mc); if (leftover) { - if (new_mc) - vfree(new_mc); + vfree(new_mc); state = UCODE_ERROR; goto out; } @@ -405,8 +400,7 @@ static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size, goto out; } - if (uci->mc) - vfree(uci->mc); + vfree(uci->mc); uci->mc = (struct microcode_intel *)new_mc; pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n", diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c index 008b91eefa18..42eb3300dfc6 100644 --- a/arch/x86/kernel/pvclock.c +++ b/arch/x86/kernel/pvclock.c @@ -83,6 +83,11 @@ unsigned long pvclock_tsc_khz(struct pvclock_vcpu_time_info *src) static atomic64_t last_value = ATOMIC64_INIT(0); +void pvclock_resume(void) +{ + atomic64_set(&last_value, 0); +} + cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) { struct pvclock_shadow_time shadow; diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c new file mode 100644 index 000000000000..2a26819bb6a8 --- /dev/null +++ b/arch/x86/kernel/resource.c @@ -0,0 +1,48 @@ +#include <linux/ioport.h> +#include <asm/e820.h> + +static void resource_clip(struct resource *res, resource_size_t start, + resource_size_t end) +{ + resource_size_t low = 0, high = 0; + + if (res->end < start || res->start > end) + return; /* no conflict */ + + if (res->start < start) + low = start - res->start; + + if (res->end > end) + high = res->end - end; + + /* Keep the area above or below the conflict, whichever is larger */ + if (low > high) + res->end = start - 1; + else + res->start = end + 1; +} + +static void remove_e820_regions(struct resource *avail) +{ + int i; + struct e820entry *entry; + + for (i = 0; i < e820.nr_map; i++) { + entry = &e820.map[i]; + + resource_clip(avail, entry->addr, + entry->addr + entry->size - 1); + } +} + +void arch_remove_reservations(struct resource *avail) +{ + /* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */ + if (avail->flags & IORESOURCE_MEM) { + if (avail->start < BIOS_END) + avail->start = BIOS_END; + resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END); + + remove_e820_regions(avail); + } +} diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 21c6746338af..a0f52af256a0 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -501,7 +501,18 @@ static inline unsigned long long get_total_mem(void) return total << PAGE_SHIFT; } -#define DEFAULT_BZIMAGE_ADDR_MAX 0x37FFFFFF +/* + * Keep the crash kernel below this limit. On 32 bits earlier kernels + * would limit the kernel to the low 512 MiB due to mapping restrictions. + * On 64 bits, kexec-tools currently limits us to 896 MiB; increase this + * limit once kexec-tools are fixed. + */ +#ifdef CONFIG_X86_32 +# define CRASH_KERNEL_ADDR_MAX (512 << 20) +#else +# define CRASH_KERNEL_ADDR_MAX (896 << 20) +#endif + static void __init reserve_crashkernel(void) { unsigned long long total_mem; @@ -520,10 +531,10 @@ static void __init reserve_crashkernel(void) const unsigned long long alignment = 16<<20; /* 16M */ /* - * kexec want bzImage is below DEFAULT_BZIMAGE_ADDR_MAX + * kexec want bzImage is below CRASH_KERNEL_ADDR_MAX */ crash_base = memblock_find_in_range(alignment, - DEFAULT_BZIMAGE_ADDR_MAX, crash_size, alignment); + CRASH_KERNEL_ADDR_MAX, crash_size, alignment); if (crash_base == MEMBLOCK_ERROR) { pr_info("crashkernel reservation failed - No suitable area found.\n"); @@ -769,7 +780,6 @@ void __init setup_arch(char **cmdline_p) x86_init.oem.arch_setup(); - resource_alloc_from_bottom = 0; iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1; setup_memory_map(); parse_setup_data(); diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 9c253bd65e24..547128546cc3 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -394,7 +394,8 @@ static void __init setup_xstate_init(void) * Setup init_xstate_buf to represent the init state of * all the features managed by the xsave */ - init_xstate_buf = alloc_bootmem(xstate_size); + init_xstate_buf = alloc_bootmem_align(xstate_size, + __alignof__(struct xsave_struct)); init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT; clts(); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 1ca12298ffc7..b81a9b7c2ca4 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -3494,6 +3494,10 @@ static void svm_cpuid_update(struct kvm_vcpu *vcpu) static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry) { switch (func) { + case 0x00000001: + /* Mask out xsave bit as long as it is not supported by SVM */ + entry->ecx &= ~(bit(X86_FEATURE_XSAVE)); + break; case 0x80000001: if (nested) entry->ecx |= (1 << 2); /* Set SVM bit */ diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index ff21fdda0c53..81fcbe9515c5 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -4227,11 +4227,6 @@ static int vmx_get_lpage_level(void) return PT_PDPE_LEVEL; } -static inline u32 bit(int bitno) -{ - return 1 << (bitno & 31); -} - static void vmx_cpuid_update(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index cdac9e592aa5..b989e1f1e5d3 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -155,11 +155,6 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { u64 __read_mostly host_xcr0; -static inline u32 bit(int bitno) -{ - return 1 << (bitno & 31); -} - static void kvm_on_user_return(struct user_return_notifier *urn) { unsigned slot; @@ -4569,9 +4564,11 @@ static void kvm_timer_init(void) #ifdef CONFIG_CPU_FREQ struct cpufreq_policy policy; memset(&policy, 0, sizeof(policy)); - cpufreq_get_policy(&policy, get_cpu()); + cpu = get_cpu(); + cpufreq_get_policy(&policy, cpu); if (policy.cpuinfo.max_freq) max_tsc_khz = policy.cpuinfo.max_freq; + put_cpu(); #endif cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); @@ -5522,6 +5519,8 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4; kvm_x86_ops->set_cr4(vcpu, sregs->cr4); + if (sregs->cr4 & X86_CR4_OSXSAVE) + update_cpuid(vcpu); if (!is_long_mode(vcpu) && is_pae(vcpu)) { load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3); mmu_reset_needed = 1; diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h index 2cea414489f3..c600da830ce0 100644 --- a/arch/x86/kvm/x86.h +++ b/arch/x86/kvm/x86.h @@ -70,6 +70,11 @@ static inline int is_paging(struct kvm_vcpu *vcpu) return kvm_read_cr0_bits(vcpu, X86_CR0_PG); } +static inline u32 bit(int bitno) +{ + return 1 << (bitno & 31); +} + void kvm_before_handle_nmi(struct kvm_vcpu *vcpu); void kvm_after_handle_nmi(struct kvm_vcpu *vcpu); int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq); diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 73b1e1a1f489..4996cf5f73a0 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -531,7 +531,10 @@ static void lguest_write_cr3(unsigned long cr3) { lguest_data.pgdir = cr3; lazy_hcall1(LHCALL_NEW_PGTABLE, cr3); - cr3_changed = true; + + /* These two page tables are simple, linear, and used during boot */ + if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table)) + cr3_changed = true; } static unsigned long lguest_read_cr3(void) @@ -703,9 +706,9 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval) * to forget all of them. Fortunately, this is very rare. * * ... except in early boot when the kernel sets up the initial pagetables, - * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell - * the Host anything changed until we've done the first page table switch, - * which brings boot back to 0.25 seconds. + * which makes booting astonishingly slow: 48 seconds! So we don't even tell + * the Host anything changed until we've done the first real page table switch, + * which brings boot back to 4.3 seconds. */ static void lguest_set_pte(pte_t *ptep, pte_t pteval) { @@ -1002,7 +1005,7 @@ static void lguest_time_init(void) clockevents_register_device(&lguest_clockevent); /* Finally, we unblock the timer interrupt. */ - enable_lguest_irq(0); + clear_bit(0, lguest_data.blocked_interrupts); } /* @@ -1349,9 +1352,6 @@ __init void lguest_init(void) */ switch_to_new_gdt(0); - /* We actually boot with all memory mapped, but let's say 128MB. */ - max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT; - /* * The Host<->Guest Switcher lives at the top of our address space, and * the Host told us how big it is when we made LGUEST_INIT hypercall: diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S index 4f420c2f2d55..e7d5382ef263 100644 --- a/arch/x86/lguest/i386_head.S +++ b/arch/x86/lguest/i386_head.S @@ -4,6 +4,7 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/processor-flags.h> +#include <asm/pgtable.h> /*G:020 * Our story starts with the kernel booting into startup_32 in @@ -37,9 +38,113 @@ ENTRY(lguest_entry) /* Set up the initial stack so we can run C code. */ movl $(init_thread_union+THREAD_SIZE),%esp + call init_pagetables + /* Jumps are relative: we're running __PAGE_OFFSET too low. */ jmp lguest_init+__PAGE_OFFSET +/* + * Initialize page tables. This creates a PDE and a set of page + * tables, which are located immediately beyond __brk_base. The variable + * _brk_end is set up to point to the first "safe" location. + * Mappings are created both at virtual address 0 (identity mapping) + * and PAGE_OFFSET for up to _end. + * + * FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they + * don't have a stack at this point, so we can't just use call and ret. + */ +init_pagetables: +#if PTRS_PER_PMD > 1 +#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD) +#else +#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD) +#endif +#define pa(X) ((X) - __PAGE_OFFSET) + +/* Enough space to fit pagetables for the low memory linear map */ +MAPPING_BEYOND_END = \ + PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT +#ifdef CONFIG_X86_PAE + + /* + * In PAE mode initial_page_table is statically defined to contain + * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3 + * entries). The identity mapping is handled by pointing two PGD entries + * to the first kernel PMD. + * + * Note the upper half of each PMD or PTE are always zero at this stage. + */ + +#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */ + + xorl %ebx,%ebx /* %ebx is kept at zero */ + + movl $pa(__brk_base), %edi + movl $pa(initial_pg_pmd), %edx + movl $PTE_IDENT_ATTR, %eax +10: + leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */ + movl %ecx,(%edx) /* Store PMD entry */ + /* Upper half already zero */ + addl $8,%edx + movl $512,%ecx +11: + stosl + xchgl %eax,%ebx + stosl + xchgl %eax,%ebx + addl $0x1000,%eax + loop 11b + + /* + * End condition: we must map up to the end + MAPPING_BEYOND_END. + */ + movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp + cmpl %ebp,%eax + jb 10b +1: + addl $__PAGE_OFFSET, %edi + movl %edi, pa(_brk_end) + shrl $12, %eax + movl %eax, pa(max_pfn_mapped) + + /* Do early initialization of the fixmap area */ + movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax + movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8) +#else /* Not PAE */ + +page_pde_offset = (__PAGE_OFFSET >> 20); + + movl $pa(__brk_base), %edi + movl $pa(initial_page_table), %edx + movl $PTE_IDENT_ATTR, %eax +10: + leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */ + movl %ecx,(%edx) /* Store identity PDE entry */ + movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */ + addl $4,%edx + movl $1024, %ecx +11: + stosl + addl $0x1000,%eax + loop 11b + /* + * End condition: we must map up to the end + MAPPING_BEYOND_END. + */ + movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp + cmpl %ebp,%eax + jb 10b + addl $__PAGE_OFFSET, %edi + movl %edi, pa(_brk_end) + shrl $12, %eax + movl %eax, pa(max_pfn_mapped) + + /* Do early initialization of the fixmap area */ + movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax + movl %eax,pa(initial_page_table+0xffc) +#endif + ret + /*G:055 * We create a macro which puts the assembler code between lgstart_ and lgend_ * markers. These templates are put in the .text section: they can't be diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c index c4bb261c106e..b1805b78842f 100644 --- a/arch/x86/pci/i386.c +++ b/arch/x86/pci/i386.c @@ -65,21 +65,13 @@ pcibios_align_resource(void *data, const struct resource *res, resource_size_t size, resource_size_t align) { struct pci_dev *dev = data; - resource_size_t start = round_down(res->end - size + 1, align); + resource_size_t start = res->start; if (res->flags & IORESOURCE_IO) { - - /* - * If we're avoiding ISA aliases, the largest contiguous I/O - * port space is 256 bytes. Clearing bits 9 and 10 preserves - * all 256-byte and smaller alignments, so the result will - * still be correctly aligned. - */ - if (!skip_isa_ioresource_align(dev)) - start &= ~0x300; - } else if (res->flags & IORESOURCE_MEM) { - if (start < BIOS_END) - start = res->end; /* fail; no space */ + if (skip_isa_ioresource_align(dev)) + return start; + if (start & 0x300) + start = (start + 0x3ff) & ~0x3ff; } return start; } diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index d7b5109f7a9c..25cd4a07d09f 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -70,6 +70,9 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, struct xen_pci_frontend_ops *xen_pci_frontend; EXPORT_SYMBOL_GPL(xen_pci_frontend); +#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \ + MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0)) + static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq, struct msi_msg *msg) { @@ -83,12 +86,7 @@ static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq, MSI_ADDR_REDIRECTION_CPU | MSI_ADDR_DEST_ID(pirq); - msg->data = - MSI_DATA_TRIGGER_EDGE | - MSI_DATA_LEVEL_ASSERT | - /* delivery mode reserved */ - (3 << 8) | - MSI_DATA_VECTOR(0); + msg->data = XEN_PIRQ_MSI_DATA; } static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) @@ -98,8 +96,23 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) struct msi_msg msg; list_for_each_entry(msidesc, &dev->msi_list, list) { + __read_msi_msg(msidesc, &msg); + pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) | + ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff); + if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) { + xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ? + "msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ); + if (irq < 0) + goto error; + ret = set_irq_msi(irq, msidesc); + if (ret < 0) + goto error_while; + printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d" + " pirq=%d\n", irq, pirq); + return 0; + } xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ? - "msi-x" : "msi", &irq, &pirq); + "msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ)); if (irq < 0 || pirq < 0) goto error; printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq); diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index 4a2afa1bac51..b6552b189bcd 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -25,7 +25,7 @@ targets += vdso.so vdso.so.dbg vdso.lds $(vobjs-y) export CPPFLAGS_vdso.lds += -P -C -VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \ +VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \ -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 $(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so @@ -69,7 +69,7 @@ vdso32.so-$(VDSO32-y) += sysenter vdso32-images = $(vdso32.so-y:%=vdso32-%.so) CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds) -VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1 +VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1 # This makes sure the $(obj) subdirectory exists even though vdso32/ # is not a kbuild sub-make subdirectory. diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 02c710bebf7a..44dcad43989d 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1021,10 +1021,6 @@ static void xen_reboot(int reason) { struct sched_shutdown r = { .reason = reason }; -#ifdef CONFIG_SMP - stop_other_cpus(); -#endif - if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r)) BUG(); } diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index a1feff9e59b6..44924e551fde 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -2415,8 +2415,6 @@ void __init xen_init_mmu_ops(void) x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done; pv_mmu_ops = xen_mmu_ops; - vmap_lazy_unmap = false; - memset(dummy_mapping, 0xff, PAGE_SIZE); } diff --git a/arch/x86/xen/platform-pci-unplug.c b/arch/x86/xen/platform-pci-unplug.c index 0f456386cce5..25c52f94a27c 100644 --- a/arch/x86/xen/platform-pci-unplug.c +++ b/arch/x86/xen/platform-pci-unplug.c @@ -68,7 +68,7 @@ static int __init check_platform_magic(void) return 0; } -void __init xen_unplug_emulated_devices(void) +void xen_unplug_emulated_devices(void) { int r; diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 01afd8a94607..b5a7f928234b 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -181,24 +181,21 @@ char * __init xen_memory_setup(void) for (i = 0; i < memmap.nr_entries; i++) { unsigned long long end = map[i].addr + map[i].size; - if (map[i].type == E820_RAM) { - if (map[i].addr < mem_end && end > mem_end) { - /* Truncate region to max_mem. */ - u64 delta = end - mem_end; + if (map[i].type == E820_RAM && end > mem_end) { + /* RAM off the end - may be partially included */ + u64 delta = min(map[i].size, end - mem_end); - map[i].size -= delta; - extra_pages += PFN_DOWN(delta); + map[i].size -= delta; + end -= delta; - end = mem_end; - } + extra_pages += PFN_DOWN(delta); } - if (end > xen_extra_mem_start) + if (map[i].size > 0 && end > xen_extra_mem_start) xen_extra_mem_start = end; - /* If region is non-RAM or below mem_end, add what remains */ - if ((map[i].type != E820_RAM || map[i].addr < mem_end) && - map[i].size > 0) + /* Add region if any remains */ + if (map[i].size > 0) e820_add_region(map[i].addr, map[i].size, map[i].type); } @@ -252,20 +249,6 @@ char * __init xen_memory_setup(void) return "Xen"; } -static void xen_idle(void) -{ - local_irq_disable(); - - if (need_resched()) - local_irq_enable(); - else { - current_thread_info()->status &= ~TS_POLLING; - smp_mb__after_clear_bit(); - safe_halt(); - current_thread_info()->status |= TS_POLLING; - } -} - /* * Set the bit indicating "nosegneg" library variants should be used. * We only need to bother in pure 32-bit mode; compat 32-bit processes @@ -362,7 +345,11 @@ void __init xen_arch_setup(void) MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ? COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE); - pm_idle = xen_idle; + /* Set up idle, making sure it calls safe_halt() pvop */ +#ifdef CONFIG_X86_32 + boot_cpu_data.hlt_works_ok = 1; +#endif + pm_idle = default_idle; fiddle_vdso(); } diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 1d789d56877c..9bbd63a129b5 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -31,6 +31,7 @@ void xen_hvm_post_suspend(int suspend_cancelled) int cpu; xen_hvm_init_shared_info(); xen_callback_vector(); + xen_unplug_emulated_devices(); if (xen_feature(XENFEAT_hvm_safe_pvclock)) { for_each_online_cpu(cpu) { xen_setup_runstate_info(cpu); diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index b2bb5aa3b054..5da5e53fb94c 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -426,6 +426,8 @@ void xen_timer_resume(void) { int cpu; + pvclock_resume(); + if (xen_clockevent != &xen_vcpuop_clockevent) return; diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h index 64044747348e..9d41bf985757 100644 --- a/arch/x86/xen/xen-ops.h +++ b/arch/x86/xen/xen-ops.h @@ -43,7 +43,7 @@ void xen_vcpu_restore(void); void xen_callback_vector(void); void xen_hvm_init_shared_info(void); -void __init xen_unplug_emulated_devices(void); +void xen_unplug_emulated_devices(void); void __init xen_build_dynamic_phys_to_machine(void); |