diff options
Diffstat (limited to 'arch')
41 files changed, 245 insertions, 2248 deletions
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 24203f9a6796..b5c1dae8327f 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -817,23 +817,12 @@ void __init ep93xx_register_i2s(void) #define EP93XX_I2SCLKDIV_MASK (EP93XX_SYSCON_I2SCLKDIV_ORIDE | \ EP93XX_SYSCON_I2SCLKDIV_SPOL) -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) +int ep93xx_i2s_acquire(void) { unsigned val; - /* Sanity check */ - if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK) - return -EINVAL; - if (i2s_config & ~EP93XX_I2SCLKDIV_MASK) - return -EINVAL; - - /* Must have only one of I2SONSSP/I2SONAC97 set */ - if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) == - (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97)) - return -EINVAL; - - ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK); - ep93xx_devcfg_set_bits(i2s_pins); + ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97, + EP93XX_SYSCON_DEVCFG_I2S_MASK); /* * This is potentially racy with the clock api for i2s_mclk, sclk and @@ -843,7 +832,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config) */ val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV); val &= ~EP93XX_I2SCLKDIV_MASK; - val |= i2s_config; + val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL; ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV); return 0; diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index d4c934931f9d..ad63d4be693f 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -59,7 +59,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data); int ep93xx_keypad_acquire_gpio(struct platform_device *pdev); void ep93xx_keypad_release_gpio(struct platform_device *pdev); void ep93xx_register_i2s(void); -int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config); +int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 4defb97bbfc8..3919fba52ac8 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -46,7 +46,6 @@ config SOC_IMX21 bool select MACH_MX21 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -55,7 +54,6 @@ config SOC_IMX25 bool select ARCH_MX25 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V2 select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -63,7 +61,6 @@ config SOC_IMX27 bool select MACH_MX27 select CPU_ARM926T - select ARCH_MXC_AUDMUX_V1 select IMX_HAVE_DMA_V1 select IMX_HAVE_IOMUX_V1 select MXC_AVIC @@ -72,7 +69,6 @@ config SOC_IMX31 bool select CPU_V6 select IMX_HAVE_PLATFORM_MXC_RNGA - select ARCH_MXC_AUDMUX_V2 select MXC_AVIC select SMP_ON_UP if SMP @@ -80,7 +76,6 @@ config SOC_IMX35 bool select CPU_V6 select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP @@ -89,7 +84,6 @@ config SOC_IMX5 select CPU_V7 select MXC_TZIC select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 select ARCH_HAS_CPUFREQ select ARCH_MX5 bool diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5db3e1463af7..5f2f91d1798b 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -32,7 +32,6 @@ #include <mach/common.h> #include <mach/iomux-mx27.h> #include <mach/hardware.h> -#include <mach/audmux.h> #include "devices-imx27.h" @@ -306,25 +305,6 @@ void __init eukrea_mbimx27_baseboard_init(void) mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins, ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \ - || defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE) - /* SSI unit master I2S codec connected to SSI_PINS_4*/ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_TCLKDIR | - MXC_AUDMUX_V1_PCR_RFSDIR | - MXC_AUDMUX_V1_PCR_RCLKDIR | - MXC_AUDMUX_V1_PCR_TFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RFCSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR3_SSI_PINS_4) - ); - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR3_SSI_PINS_4, - MXC_AUDMUX_V1_PCR_SYN | - MXC_AUDMUX_V1_PCR_RXDSEL(MX27_AUDMUX_HPCR1_SSI0) - ); -#endif - imx27_add_imx_uart1(&uart_pdata); imx27_add_imx_uart2(&uart_pdata); #if !defined(MACH_EUKREA_CPUIMX27_USEUART4) diff --git a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b986..aaa592fdb9ce 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c @@ -37,7 +37,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx51.h> -#include <mach/audmux.h> #include "devices-imx51.h" diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index 66e8726253fa..2cf603e11c4f 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -31,7 +31,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/mx25.h> -#include <mach/audmux.h> #include "devices-imx25.h" @@ -241,22 +240,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD5*/ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(4) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(4), - MXC_AUDMUX_V2_PDCR_RXDSEL(4) - ); - mxc_audmux_v2_configure_port(4, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - imx25_add_imx_uart1(&uart_pdata); imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata); imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 0f0af02b3182..fd8bf8a425a7 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -38,7 +38,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> -#include <mach/audmux.h> #include "devices-imx35.h" @@ -252,22 +251,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_pads))) printk(KERN_ERR "error setting mbimxsd pads !\n"); -#if defined(CONFIG_SND_SOC_EUKREA_TLV320) - /* SSI unit master I2S codec connected to SSI_AUD4 */ - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | - MXC_AUDMUX_V2_PTCR_TFSDIR | - MXC_AUDMUX_V2_PTCR_TFSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR | - MXC_AUDMUX_V2_PTCR_TCSEL(3), - MXC_AUDMUX_V2_PDCR_RXDSEL(3) - ); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN, - MXC_AUDMUX_V2_PDCR_RXDSEL(0) - ); -#endif - imx35_add_imx_uart1(&uart_pdata); imx35_add_ipu_core(&mx3_ipu_data); imx35_add_mx3_sdc_fb(&mx3fb_pdata); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index c2766ae02b4f..428459fbca4b 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -263,6 +263,7 @@ static void __init visstrim_m10_board_init(void) imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); } static void __init visstrim_m10_timer_init(void) diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index d3b9c6b5edde..541152e450c4 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -36,7 +36,6 @@ #include <mach/hardware.h> #include <mach/iomux-mx27.h> #include <asm/mach/time.h> -#include <mach/audmux.h> #include <mach/irqs.h> #include <mach/ulpi.h> @@ -359,18 +358,6 @@ static void __init pca100_init(void) imx27_soc_init(); - /* SSI unit */ - mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V1_PCR_TFCSEL(3) | - MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ - MXC_AUDMUX_V1_PCR_RXDSEL(3)); - mxc_audmux_v1_configure_port(3, - MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V1_PCR_TFCSEL(0) | - MXC_AUDMUX_V1_PCR_TFSDIR | - MXC_AUDMUX_V1_PCR_RXDSEL(0)); - ret = mxc_gpio_setup_multiple_pins(pca100_pins, ARRAY_SIZE(pca100_pins), "PCA100"); if (ret) diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 06dc106519ae..237474fcca23 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -37,7 +37,6 @@ #include <mach/common.h> #include <mach/iomux-mx35.h> #include <mach/ulpi.h> -#include <mach/audmux.h> #include "devices-imx35.h" @@ -362,18 +361,6 @@ static void __init pcm043_init(void) mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); - mxc_audmux_v2_configure_port(3, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TFSEL(0) | - MXC_AUDMUX_V2_PTCR_TFSDIR, - MXC_AUDMUX_V2_PDCR_RXDSEL(0)); - - mxc_audmux_v2_configure_port(0, - MXC_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - MXC_AUDMUX_V2_PTCR_TCSEL(3) | - MXC_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ - MXC_AUDMUX_V2_PDCR_RXDSEL(3)); - imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx2_wdt(NULL); diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 3f05dfebacc9..14d540edfd1e 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -75,6 +75,10 @@ void __init mx21_init_irq(void) mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); } +static const struct resource imx21_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX21_AUDMUX_BASE_ADDR, SZ_4K), +}; + void __init imx21_soc_init(void) { mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); @@ -85,4 +89,6 @@ void __init imx21_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); imx_add_imx_dma(); + platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res, + ARRAY_SIZE(imx21_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index cc4d152bd9bd..153b457acdc0 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -83,6 +83,10 @@ static struct sdma_platform_data imx25_sdma_pdata __initdata = { .script_addrs = &imx25_sdma_script, }; +static const struct resource imx25_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx25_soc_init(void) { /* i.mx25 has the i.mx31 type gpio */ @@ -93,4 +97,7 @@ void __init imx25_soc_init(void) /* i.mx25 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); + /* i.mx25 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res, + ARRAY_SIZE(imx25_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 96dd1f5ea7bd..8cb3f5e3e569 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -75,6 +75,10 @@ void __init mx27_init_irq(void) mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); } +static const struct resource imx27_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX27_AUDMUX_BASE_ADDR, SZ_4K), +}; + void __init imx27_soc_init(void) { /* i.mx27 has the i.mx21 type gpio */ @@ -86,4 +90,7 @@ void __init imx27_soc_init(void) mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); imx_add_imx_dma(); + /* imx27 has the imx21 type audmux */ + platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, + ARRAY_SIZE(imx27_audmux_res)); } diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 31807d2a8b7b..2530c151b7b3 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -158,6 +158,10 @@ static struct sdma_platform_data imx31_sdma_pdata __initdata = { .script_addrs = &imx31_to2_sdma_script, }; +static const struct resource imx31_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx31_soc_init(void) { int to_version = mx31_revision() >> 4; @@ -175,6 +179,8 @@ void __init imx31_soc_init(void) } imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); + platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, + ARRAY_SIZE(imx31_audmux_res)); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -241,6 +247,10 @@ static struct sdma_platform_data imx35_sdma_pdata __initdata = { .script_addrs = &imx35_to2_sdma_script, }; +static const struct resource imx35_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX35_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx35_soc_init(void) { int to_version = mx35_revision() >> 4; @@ -259,5 +269,8 @@ void __init imx35_soc_init(void) } imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); + /* i.mx35 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx35_audmux_res, + ARRAY_SIZE(imx35_audmux_res)); } #endif /* ifdef CONFIG_SOC_IMX35 */ diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea3817..90d7880bb372 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -170,6 +170,18 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = { .script_addrs = &imx53_sdma_script, }; +static const struct resource imx50_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx51_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), +}; + +static const struct resource imx53_audmux_res[] __initconst = { + DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), +}; + void __init imx50_soc_init(void) { /* i.mx50 has the i.mx31 type gpio */ @@ -179,6 +191,10 @@ void __init imx50_soc_init(void) mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); + + /* i.mx50 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res, + ARRAY_SIZE(imx50_audmux_res)); } void __init imx51_soc_init(void) @@ -191,6 +207,9 @@ void __init imx51_soc_init(void) /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); + /* i.mx51 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res, + ARRAY_SIZE(imx51_audmux_res)); } void __init imx53_soc_init(void) @@ -206,4 +225,7 @@ void __init imx53_soc_init(void) /* i.mx53 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); + /* i.mx53 has the i.mx31 type audmux */ + platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, + ARRAY_SIZE(imx53_audmux_res)); } diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c index 01f8c8992880..7e99c3f340fc 100644 --- a/arch/arm/mach-kirkwood/openrd-setup.c +++ b/arch/arm/mach-kirkwood/openrd-setup.c @@ -83,6 +83,11 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct platform_device openrd_client_audio_device = { + .name = "openrd-client-audio", + .id = -1, +}; + static int __initdata uart1; static int __init sd_uart_selection(char *str) @@ -172,6 +177,7 @@ static void __init openrd_init(void) kirkwood_i2c_init(); if (machine_is_openrd_client() || machine_is_openrd_ultimate()) { + platform_device_register(&openrd_client_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c index 966b2b3bb813..f9d2a11b7f96 100644 --- a/arch/arm/mach-kirkwood/t5325-setup.c +++ b/arch/arm/mach-kirkwood/t5325-setup.c @@ -106,6 +106,11 @@ static struct platform_device hp_t5325_button_device = { } }; +static struct platform_device hp_t5325_audio_device = { + .name = "t5325-audio", + .id = -1, +}; + static unsigned int hp_t5325_mpp_config[] __initdata = { MPP0_NF_IO2, MPP1_SPI_MOSI, @@ -179,6 +184,7 @@ static void __init hp_t5325_init(void) kirkwood_sata_init(&hp_t5325_sata_data); kirkwood_ehci_init(); platform_device_register(&hp_t5325_button_device); + platform_device_register(&hp_t5325_audio_device); i2c_register_board_info(0, i2c_board_info, ARRAY_SIZE(i2c_board_info)); kirkwood_audio_init(); diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 4f8d66f044e7..922ab0dc2bcd 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -37,7 +37,6 @@ comment "OMAP Board Type" config MACH_OMAP_INNOVATOR bool "TI Innovator" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) - select OMAP_MCBSP help TI OMAP 1510 or 1610 Innovator board support. Say Y here if you have such a board. @@ -45,7 +44,6 @@ config MACH_OMAP_INNOVATOR config MACH_OMAP_H2 bool "TI H2 Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 1610/1611B H2 board support. Say Y here if you have such a board. @@ -72,7 +70,6 @@ config MACH_HERALD config MACH_OMAP_OSK bool "TI OSK Support" depends on ARCH_OMAP1 && ARCH_OMAP16XX - select OMAP_MCBSP help TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here if you have such a board. diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 11c85cd2731a..9923f92b5450 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -6,7 +6,9 @@ obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 1d76a63c0983..187b2fe132e9 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -28,7 +28,6 @@ #include <plat/mux.h> #include <plat/mmc.h> #include <plat/omap7xx.h> -#include <plat/mcbsp.h> #include "clock.h" @@ -250,16 +249,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (!cpu_is_omap7xx()) - platform_device_register(&omap_mcbsp3); platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 91f9abbd3250..3e8410a99990 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -420,18 +420,6 @@ static int __init omap1_mcbsp_init(void) return -ENODEV; if (cpu_is_omap7xx()) - omap_mcbsp_count = OMAP7XX_MCBSP_COUNT; - else if (cpu_is_omap15xx()) - omap_mcbsp_count = OMAP15XX_MCBSP_COUNT; - else if (cpu_is_omap16xx()) - omap_mcbsp_count = OMAP16XX_MCBSP_COUNT; - - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - if (cpu_is_omap7xx()) omap_mcbsp_register_board_cfg(omap7xx_mcbsp_res_0, OMAP7XX_MCBSP_RES_SZ, omap7xx_mcbsp_pdata, @@ -449,7 +437,7 @@ static int __init omap1_mcbsp_init(void) omap16xx_mcbsp_pdata, OMAP16XX_MCBSP_COUNT); - return omap_mcbsp_init(); + return 0; } arch_initcall(omap1_mcbsp_init); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index bd76394ccaf8..06326a6e460d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -17,7 +17,9 @@ obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o +ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) +obj-y += mcbsp.o +endif obj-$(CONFIG_TWL4030_CORE) += omap_twl.o diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 4e9071589bfb..90c76d340fb3 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -41,6 +41,7 @@ #include <video/omap-panel-nokia-dsi.h> #include <video/omap-panel-picodlp.h> #include <linux/wl12xx.h> +#include <linux/platform_data/omap-abe-twl6040.h> #include "mux.h" #include "hsmmc.h" @@ -378,12 +379,40 @@ static struct platform_device sdp4430_dmic_codec = { .id = -1, }; +static struct omap_abe_twl6040_data sdp4430_abe_audio_data = { + .card_name = "SDP4430", + .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_ep = 1, + .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + .has_vibra = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + + .has_dmic = 1, + .has_hsmic = 1, + .has_mainmic = 1, + .has_submic = 1, + .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + + .jack_detection = 1, + /* MCLK input is 38.4MHz */ + .mclk_freq = 38400000, +}; + +static struct platform_device sdp4430_abe_audio = { + .name = "omap-abe-twl6040", + .id = -1, + .dev = { + .platform_data = &sdp4430_abe_audio_data, + }, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, &sdp4430_vbat, &sdp4430_dmic_codec, + &sdp4430_abe_audio, }; static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 28fc271f7031..e4415917693f 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -28,6 +28,7 @@ #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> #include <linux/wl12xx.h> +#include <linux/platform_data/omap-abe-twl6040.h> #include <mach/hardware.h> #include <asm/hardware/gic.h> @@ -91,9 +92,34 @@ static struct platform_device leds_gpio = { }, }; +static struct omap_abe_twl6040_data panda_abe_audio_data = { + /* Audio out */ + .has_hs = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* HandsFree through expasion connector */ + .has_hf = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* PandaBoard: FM TX, PandaBoardES: can be connected to audio out */ + .has_aux = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* PandaBoard: FM RX, PandaBoardES: audio in */ + .has_afm = ABE_TWL6040_LEFT | ABE_TWL6040_RIGHT, + /* No jack detection. */ + .jack_detection = 0, + /* MCLK input is 38.4MHz */ + .mclk_freq = 38400000, + +}; + +static struct platform_device panda_abe_audio = { + .name = "omap-abe-twl6040", + .id = -1, + .dev = { + .platform_data = &panda_abe_audio_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, + &panda_abe_audio, }; static const struct usbhs_omap_board_data usbhs_bdata __initconst = { @@ -252,8 +278,25 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } +static struct twl4030_codec_data twl6040_codec = { + /* single-step ramp for headset and handsfree */ + .hs_left_step = 0x0f, + .hs_right_step = 0x0f, + .hf_left_step = 0x1d, + .hf_right_step = 0x1d, +}; + +static struct twl4030_audio_data twl6040_audio = { + .codec = &twl6040_codec, + .audpwron_gpio = 127, + .naudint_irq = OMAP44XX_IRQ_SYS_2N, + .irq_base = TWL6040_CODEC_IRQ_BASE, +}; + /* Panda board uses the common PMIC configuration */ -static struct twl4030_platform_data omap4_panda_twldata; +static struct twl4030_platform_data omap4_panda_twldata = { + .audio = &twl6040_audio, +}; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -485,6 +528,20 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } +static void omap4_panda_init_rev(void) +{ + if (cpu_is_omap443x()) { + /* PandaBoard 4430 */ + /* ASoC audio configuration */ + panda_abe_audio_data.card_name = "PandaBoard"; + panda_abe_audio_data.has_hsmic = 1; + } else { + /* PandaBoard ES */ + /* ASoC audio configuration */ + panda_abe_audio_data.card_name = "PandaBoardES"; + } +} + static void __init omap4_panda_init(void) { int package = OMAP_PACKAGE_CBS; @@ -498,6 +555,7 @@ static void __init omap4_panda_init(void) if (ret) pr_err("error setting wl12xx data: %d\n", ret); + omap4_panda_init_rev(); omap4_panda_i2c_init(); platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); platform_device_register(&omap_vwlan_device); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 283d11eae693..e9fae652cd04 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -26,7 +26,6 @@ #include <plat/tc.h> #include <plat/board.h> -#include <plat/mcbsp.h> #include <plat/mmc.h> #include <plat/dma.h> #include <plat/omap_hwmod.h> @@ -304,29 +303,8 @@ static struct platform_device omap_pcm = { .id = -1, }; -/* - * OMAP2420 has 2 McBSP ports - * OMAP2430 has 5 McBSP ports - * OMAP3 has 5 McBSP ports - * OMAP4 has 4 McBSP ports - */ -OMAP_MCBSP_PLATFORM_DEVICE(1); -OMAP_MCBSP_PLATFORM_DEVICE(2); -OMAP_MCBSP_PLATFORM_DEVICE(3); -OMAP_MCBSP_PLATFORM_DEVICE(4); -OMAP_MCBSP_PLATFORM_DEVICE(5); - static void omap_init_audio(void) { - platform_device_register(&omap_mcbsp1); - platform_device_register(&omap_mcbsp2); - if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - platform_device_register(&omap_mcbsp3); - platform_device_register(&omap_mcbsp4); - } - if (cpu_is_omap243x() || cpu_is_omap34xx()) - platform_device_register(&omap_mcbsp5); - platform_device_register(&omap_pcm); } diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index fb4bcf81a183..ecc039e794db 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -34,7 +34,7 @@ #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" -/* McBSP internal signal muxing function */ +/* McBSP1 internal signal muxing function for OMAP2/3 */ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, const char *src) { @@ -65,6 +65,42 @@ static int omap2_mcbsp1_mux_rx_clk(struct device *dev, const char *signal, return 0; } +/* McBSP4 internal signal muxing function for OMAP4 */ +#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX (1 << 31) +#define OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX (1 << 30) +static int omap4_mcbsp4_mux_rx_clk(struct device *dev, const char *signal, + const char *src) +{ + u32 v; + + /* + * In CONTROL_MCBSPLP register only bit 30 (CLKR mux), and bit 31 (FSR + * mux) is used */ + v = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); + + if (!strcmp(signal, "clkr")) { + if (!strcmp(src, "clkr")) + v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; + else if (!strcmp(src, "clkx")) + v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_CLKX; + else + return -EINVAL; + } else if (!strcmp(signal, "fsr")) { + if (!strcmp(src, "fsr")) + v &= ~OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; + else if (!strcmp(src, "fsx")) + v |= OMAP4_CONTROL_MCBSPLP_ALBCTRLRX_FSX; + else + return -EINVAL; + } else { + return -EINVAL; + } + + omap4_ctrl_pad_writel(v, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP); + + return 0; +} + /* McBSP CLKS source switching function */ static int omap2_mcbsp_set_clk_src(struct device *dev, struct clk *clk, const char *src) @@ -146,9 +182,15 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->has_ccr = true; } pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) + + /* On OMAP2/3 the McBSP1 port has 6 pin configuration */ + if (id == 1 && oh->class->rev < MCBSP_CONFIG_TYPE4) pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; + /* On OMAP4 the McBSP4 port has 6 pin configuration */ + if (id == 4 && oh->class->rev == MCBSP_CONFIG_TYPE4) + pdata->mux_signal = omap4_mcbsp4_mux_rx_clk; + if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) /* The FIFO has 1024 + 256 locations */ @@ -180,7 +222,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - omap_mcbsp_count++; return 0; } @@ -188,11 +229,6 @@ static int __init omap2_mcbsp_init(void) { omap_hwmod_for_each_by_class("mcbsp", omap_init_mcbsp, NULL); - mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), - GFP_KERNEL); - if (!mcbsp_ptr) - return -ENOMEM; - - return omap_mcbsp_init(); + return 0; } arch_initcall(omap2_mcbsp_init); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c index cd3c97e2ee75..32a30f38ba0c 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -102,6 +102,7 @@ static struct wm8962_pdata wm8962_pdata __initdata = { 0x8000 | WM8962_GPIO_FN_DMICDAT, WM8962_GPIO_FN_IRQ, /* Open drain mode */ }, + .in4_dc_measure = true, }; static struct wm9081_pdata wm9081_pdata __initdata = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index b4718b00e827..8f6da7f134b3 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -737,26 +737,18 @@ fsi_set_rate_end: return ret; } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) -{ - int ret; - - if (is_porta) - ret = fsi_ak4642_set_rate(dev, rate, enable); - else - ret = fsi_hdmi_set_rate(dev, rate, enable); - - return ret; -} - static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, - - .portb_flags = SH_FSI_BRS_INV | - SH_FSI_BRM_INV | - SH_FSI_LRS_INV | - SH_FSI_FMT_SPDIF, - .set_rate = fsi_set_rate, + .port_a = { + .flags = SH_FSI_BRS_INV, + .set_rate = fsi_ak4642_set_rate, + }, + .port_b = { + .flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_FMT_SPDIF, + .set_rate = fsi_hdmi_set_rate, + }, }; static struct resource fsi_resources[] = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7b53cda41851..d99e780dffca 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -860,7 +860,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) return clk_enable(clk); } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +static int fsi_b_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; @@ -869,10 +869,6 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) int ackmd_bpfmd; int ret; - /* FSIA is slave mode. nothing to do here */ - if (is_porta) - return 0; - /* clock start */ switch (rate) { case 44100: @@ -916,14 +912,16 @@ fsi_set_rate_end: } static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, - - .portb_flags = SH_FSI_BRS_INV | + .port_a = { + .flags = SH_FSI_BRS_INV, + }, + .port_b = { + .flags = SH_FSI_BRS_INV | SH_FSI_BRM_INV | SH_FSI_LRS_INV | SH_FSI_FMT_SPDIF, - - .set_rate = fsi_set_rate, + .set_rate = fsi_b_set_rate, + } }; static struct resource fsi_resources[] = { diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index dcebb1230f7f..c722f9ce6918 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -88,12 +88,6 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config ARCH_MXC_AUDMUX_V1 - bool - -config ARCH_MXC_AUDMUX_V2 - bool - config IRAM_ALLOC bool select GENERIC_ALLOCATOR diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index 076db84f3e31..e81290c27c65 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -14,8 +14,6 @@ obj-$(CONFIG_IRAM_ALLOC) += iram_alloc.o obj-$(CONFIG_MXC_PWM) += pwm.o obj-$(CONFIG_MXC_ULPI) += ulpi.o obj-$(CONFIG_MXC_USE_EPIT) += epit.o -obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o -obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o ifdef CONFIG_SND_IMX_SOC diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c deleted file mode 100644 index 1180bef7664b..000000000000 --- a/arch/arm/plat-mxc/audmux-v1.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <mach/audmux.h> -#include <mach/hardware.h> - -static void __iomem *audmux_base; - -static unsigned char port_mapping[] = { - 0x0, 0x4, 0x8, 0x10, 0x14, 0x1c, -}; - -int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr) -{ - if (!audmux_base) { - printk("%s: not configured\n", __func__); - return -ENOSYS; - } - - if (port >= ARRAY_SIZE(port_mapping)) - return -EINVAL; - - writel(pcr, audmux_base + port_mapping[port]); - - return 0; -} -EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port); - -static int mxc_audmux_v1_init(void) -{ -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) - audmux_base = MX21_IO_ADDRESS(MX21_AUDMUX_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) - audmux_base = MX27_IO_ADDRESS(MX27_AUDMUX_BASE_ADDR); - else -#endif - (void)0; - - return 0; -} - -postcore_initcall(mxc_audmux_v1_init); diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c deleted file mode 100644 index 8cced35009bd..000000000000 --- a/arch/arm/plat-mxc/audmux-v2.c +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de> - * - * Initial development of this code was funded by - * Phytec Messtechnik GmbH, http://www.phytec.de - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <linux/module.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/debugfs.h> -#include <linux/slab.h> -#include <mach/audmux.h> -#include <mach/hardware.h> - -static struct clk *audmux_clk; -static void __iomem *audmux_base; - -#define MXC_AUDMUX_V2_PTCR(x) ((x) * 8) -#define MXC_AUDMUX_V2_PDCR(x) ((x) * 8 + 4) - -#ifdef CONFIG_DEBUG_FS -static struct dentry *audmux_debugfs_root; - -static int audmux_open_file(struct inode *inode, struct file *file) -{ - file->private_data = inode->i_private; - return 0; -} - -/* There is an annoying discontinuity in the SSI numbering with regard - * to the Linux number of the devices */ -static const char *audmux_port_string(int port) -{ - switch (port) { - case MX31_AUDMUX_PORT1_SSI0: - return "imx-ssi.0"; - case MX31_AUDMUX_PORT2_SSI1: - return "imx-ssi.1"; - case MX31_AUDMUX_PORT3_SSI_PINS_3: - return "SSI3"; - case MX31_AUDMUX_PORT4_SSI_PINS_4: - return "SSI4"; - case MX31_AUDMUX_PORT5_SSI_PINS_5: - return "SSI5"; - case MX31_AUDMUX_PORT6_SSI_PINS_6: - return "SSI6"; - default: - return "UNKNOWN"; - } -} - -static ssize_t audmux_read_file(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - ssize_t ret; - char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); - int port = (int)file->private_data; - u32 pdcr, ptcr; - - if (!buf) - return -ENOMEM; - - if (audmux_clk) - clk_enable(audmux_clk); - - ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port)); - pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port)); - - if (audmux_clk) - clk_disable(audmux_clk); - - ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n", - pdcr, ptcr); - - if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxFS output from %s, ", - audmux_port_string((ptcr >> 27) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxFS input, "); - - if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxClk output from %s", - audmux_port_string((ptcr >> 22) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "TxClk input"); - - ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n"); - - if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) { - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "Port is symmetric"); - } else { - if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxFS output from %s, ", - audmux_port_string((ptcr >> 17) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxFS input, "); - - if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR) - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxClk output from %s", - audmux_port_string((ptcr >> 12) & 0x7)); - else - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "RxClk input"); - } - - ret += snprintf(buf + ret, PAGE_SIZE - ret, - "\nData received from %s\n", - audmux_port_string((pdcr >> 13) & 0x7)); - - ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); - - kfree(buf); - - return ret; -} - -static const struct file_operations audmux_debugfs_fops = { - .open = audmux_open_file, - .read = audmux_read_file, - .llseek = default_llseek, -}; - -static void audmux_debugfs_init(void) -{ - int i; - char buf[20]; - - audmux_debugfs_root = debugfs_create_dir("audmux", NULL); - if (!audmux_debugfs_root) { - pr_warning("Failed to create AUDMUX debugfs root\n"); - return; - } - - for (i = 1; i < 8; i++) { - snprintf(buf, sizeof(buf), "ssi%d", i); - if (!debugfs_create_file(buf, 0444, audmux_debugfs_root, - (void *)i, &audmux_debugfs_fops)) - pr_warning("Failed to create AUDMUX port %d debugfs file\n", - i); - } -} -#else -static inline void audmux_debugfs_init(void) -{ -} -#endif - -int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, - unsigned int pdcr) -{ - if (!audmux_base) - return -ENOSYS; - - if (audmux_clk) - clk_enable(audmux_clk); - - writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port)); - writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port)); - - if (audmux_clk) - clk_disable(audmux_clk); - - return 0; -} -EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port); - -static int mxc_audmux_v2_init(void) -{ - int ret; - if (cpu_is_mx51()) { - audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx31()) { - audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx35()) { - audmux_clk = clk_get(NULL, "audmux"); - if (IS_ERR(audmux_clk)) { - ret = PTR_ERR(audmux_clk); - printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, - ret); - return ret; - } - audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR); - } else if (cpu_is_mx25()) { - audmux_clk = clk_get(NULL, "audmux"); - if (IS_ERR(audmux_clk)) { - ret = PTR_ERR(audmux_clk); - printk(KERN_ERR "%s: cannot get clock: %d\n", __func__, - ret); - return ret; - } - audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR); - } - - audmux_debugfs_init(); - - return 0; -} - -postcore_initcall(mxc_audmux_v2_init); diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h deleted file mode 100644 index 6fda788ed0e9..000000000000 --- a/arch/arm/plat-mxc/include/mach/audmux.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef __MACH_AUDMUX_H -#define __MACH_AUDMUX_H - -#define MX27_AUDMUX_HPCR1_SSI0 0 -#define MX27_AUDMUX_HPCR2_SSI1 1 -#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 -#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 -#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 -#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 - -#define MX31_AUDMUX_PORT1_SSI0 0 -#define MX31_AUDMUX_PORT2_SSI1 1 -#define MX31_AUDMUX_PORT3_SSI_PINS_3 2 -#define MX31_AUDMUX_PORT4_SSI_PINS_4 3 -#define MX31_AUDMUX_PORT5_SSI_PINS_5 4 -#define MX31_AUDMUX_PORT6_SSI_PINS_6 5 - -#define MX51_AUDMUX_PORT1_SSI0 0 -#define MX51_AUDMUX_PORT2_SSI1 1 -#define MX51_AUDMUX_PORT3 2 -#define MX51_AUDMUX_PORT4 3 -#define MX51_AUDMUX_PORT5 4 -#define MX51_AUDMUX_PORT6 5 -#define MX51_AUDMUX_PORT7 6 - -/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ -#define MXC_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) -#define MXC_AUDMUX_V1_PCR_INMEN (1 << 8) -#define MXC_AUDMUX_V1_PCR_TXRXEN (1 << 10) -#define MXC_AUDMUX_V1_PCR_SYN (1 << 12) -#define MXC_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13) -#define MXC_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20) -#define MXC_AUDMUX_V1_PCR_RCLKDIR (1 << 24) -#define MXC_AUDMUX_V1_PCR_RFSDIR (1 << 25) -#define MXC_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26) -#define MXC_AUDMUX_V1_PCR_TCLKDIR (1 << 30) -#define MXC_AUDMUX_V1_PCR_TFSDIR (1 << 31) - -/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ -#define MXC_AUDMUX_V2_PTCR_TFSDIR (1 << 31) -#define MXC_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) -#define MXC_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) -#define MXC_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22) -#define MXC_AUDMUX_V2_PTCR_RFSDIR (1 << 21) -#define MXC_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17) -#define MXC_AUDMUX_V2_PTCR_RCLKDIR (1 << 16) -#define MXC_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12) -#define MXC_AUDMUX_V2_PTCR_SYN (1 << 11) - -#define MXC_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13) -#define MXC_AUDMUX_V2_PDCR_TXRXEN (1 << 12) -#define MXC_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8) -#define MXC_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff) - -int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr); - -int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr, - unsigned int pdcr); - -#endif /* __MACH_AUDMUX_H */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index aa59f4247dc5..8f81503a4df7 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -110,14 +110,6 @@ config OMAP_MUX_WARNINGS to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. -config OMAP_MCBSP - bool "McBSP support" - depends on ARCH_OMAP - default y - help - Say Y here if you want support for the OMAP Multichannel - Buffered Serial Port. - config OMAP_MBOX_FWK tristate "Mailbox framework support" depends on ARCH_OMAP diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 9a584614e7e6..c0fe2757b695 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -17,8 +17,6 @@ obj-$(CONFIG_ARCH_OMAP2) += omap_device.o obj-$(CONFIG_ARCH_OMAP3) += omap_device.o obj-$(CONFIG_ARCH_OMAP4) += omap_device.o -obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o - obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 8fa74e2c9d6e..18814127809a 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -27,271 +27,10 @@ #include <linux/spinlock.h> #include <linux/clk.h> -/* macro for building platform_device for McBSP ports */ -#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ -static struct platform_device omap_mcbsp##port_nr = { \ - .name = "omap-mcbsp-dai", \ - .id = port_nr - 1, \ -} - #define MCBSP_CONFIG_TYPE2 0x2 #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -/* McBSP register numbers. Register address offset = num * reg_step */ -enum { - /* Common registers */ - OMAP_MCBSP_REG_SPCR2 = 4, - OMAP_MCBSP_REG_SPCR1, - OMAP_MCBSP_REG_RCR2, - OMAP_MCBSP_REG_RCR1, - OMAP_MCBSP_REG_XCR2, - OMAP_MCBSP_REG_XCR1, - OMAP_MCBSP_REG_SRGR2, - OMAP_MCBSP_REG_SRGR1, - OMAP_MCBSP_REG_MCR2, - OMAP_MCBSP_REG_MCR1, - OMAP_MCBSP_REG_RCERA, - OMAP_MCBSP_REG_RCERB, - OMAP_MCBSP_REG_XCERA, - OMAP_MCBSP_REG_XCERB, - OMAP_MCBSP_REG_PCR0, - OMAP_MCBSP_REG_RCERC, - OMAP_MCBSP_REG_RCERD, - OMAP_MCBSP_REG_XCERC, - OMAP_MCBSP_REG_XCERD, - OMAP_MCBSP_REG_RCERE, - OMAP_MCBSP_REG_RCERF, - OMAP_MCBSP_REG_XCERE, - OMAP_MCBSP_REG_XCERF, - OMAP_MCBSP_REG_RCERG, - OMAP_MCBSP_REG_RCERH, - OMAP_MCBSP_REG_XCERG, - OMAP_MCBSP_REG_XCERH, - - /* OMAP1-OMAP2420 registers */ - OMAP_MCBSP_REG_DRR2 = 0, - OMAP_MCBSP_REG_DRR1, - OMAP_MCBSP_REG_DXR2, - OMAP_MCBSP_REG_DXR1, - - /* OMAP2430 and onwards */ - OMAP_MCBSP_REG_DRR = 0, - OMAP_MCBSP_REG_DXR = 2, - OMAP_MCBSP_REG_SYSCON = 35, - OMAP_MCBSP_REG_THRSH2, - OMAP_MCBSP_REG_THRSH1, - OMAP_MCBSP_REG_IRQST = 40, - OMAP_MCBSP_REG_IRQEN, - OMAP_MCBSP_REG_WAKEUPEN, - OMAP_MCBSP_REG_XCCR, - OMAP_MCBSP_REG_RCCR, - OMAP_MCBSP_REG_XBUFFSTAT, - OMAP_MCBSP_REG_RBUFFSTAT, - OMAP_MCBSP_REG_SSELCR, -}; - -/* OMAP3 sidetone control registers */ -#define OMAP_ST_REG_REV 0x00 -#define OMAP_ST_REG_SYSCONFIG 0x10 -#define OMAP_ST_REG_IRQSTATUS 0x18 -#define OMAP_ST_REG_IRQENABLE 0x1C -#define OMAP_ST_REG_SGAINCR 0x24 -#define OMAP_ST_REG_SFIRCR 0x28 -#define OMAP_ST_REG_SSELCR 0x2C - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define ALB 0x8000 -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/*********************** McBSP XCCR bit definitions *************************/ -#define EXTCLKGATE 0x8000 -#define PPCONNECT 0x4000 -#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ -#define XFULL_CYCLE 0x0800 -#define DILB 0x0020 -#define XDMAEN 0x0008 -#define XDISABLE 0x0001 - -/********************** McBSP RCCR bit definitions *************************/ -#define RFULL_CYCLE 0x0800 -#define RDMAEN 0x0008 -#define RDISABLE 0x0001 - -/********************** McBSP SYSCONFIG bit definitions ********************/ -#define CLOCKACTIVITY(value) ((value)<<8) -#define SIDLEMODE(value) ((value)<<3) -#define ENAWAKEUP 0x0004 -#define SOFTRST 0x0002 - -/********************** McBSP SSELCR bit definitions ***********************/ -#define SIDETONEEN 0x0400 - -/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/ -#define ST_AUTOIDLE 0x0001 - -/********************** McBSP Sidetone SGAINCR bit definitions *************/ -#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */ -#define ST_CH0GAIN(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SFIRCR bit definitions **************/ -#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SSELCR bit definitions **************/ -#define ST_COEFFWRDONE 0x0004 -#define ST_COEFFWREN 0x0002 -#define ST_SIDETONEEN 0x0001 - -/********************** McBSP DMA operating modes **************************/ -#define MCBSP_DMA_MODE_ELEMENT 0 -#define MCBSP_DMA_MODE_THRESHOLD 1 -#define MCBSP_DMA_MODE_FRAME 2 - -/********************** McBSP WAKEUPEN bit definitions *********************/ -#define XEMPTYEOFEN 0x4000 -#define XRDYEN 0x0400 -#define XEOFEN 0x0200 -#define XFSXEN 0x0100 -#define XSYNCERREN 0x0080 -#define RRDYEN 0x0008 -#define REOFEN 0x0004 -#define RFSREN 0x0002 -#define RSYNCERREN 0x0001 - -/* CLKR signal muxing options */ -#define CLKR_SRC_CLKR 0 -#define CLKR_SRC_CLKX 1 - -/* FSR signal muxing options */ -#define FSR_SRC_FSR 0 -#define FSR_SRC_FSX 1 - -/* McBSP functional clock sources */ -#define MCBSP_CLKS_PRCM_SRC 0 -#define MCBSP_CLKS_PAD_SRC 1 - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; - u16 xccr; - u16 rccr; -}; - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -312,43 +51,6 @@ struct omap_mcbsp_platform_data { int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; -struct omap_mcbsp_st_data { - void __iomem *io_base_st; - bool running; - bool enabled; - s16 taps[128]; /* Sidetone filter coefficients */ - int nr_taps; /* Number of filter coefficients in use */ - s16 ch0gain; - s16 ch1gain; -}; - -struct omap_mcbsp { - struct device *dev; - unsigned long phys_base; - unsigned long phys_dma_base; - void __iomem *io_base; - u8 id; - u8 free; - - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - u8 dma_tx_sync; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *fclk; - struct omap_mcbsp_st_data *st_data; - int dma_op_mode; - u16 max_tx_thres; - u16 max_rx_thres; - void *reg_cache; - int reg_cache_size; -}; - /** * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod * @sidetone: name of the sidetone device @@ -357,39 +59,4 @@ struct omap_mcbsp_dev_attr { const char *sidetone; }; -extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count; - -int omap_mcbsp_init(void); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); -u16 omap_mcbsp_get_fifo_size(unsigned int id); -u16 omap_mcbsp_get_tx_delay(unsigned int id); -u16 omap_mcbsp_get_rx_delay(unsigned int id); -int omap_mcbsp_get_dma_op_mode(unsigned int id); -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id, int tx, int rx); -void omap_mcbsp_stop(unsigned int id, int tx, int rx); - -/* McBSP functional clock source changing function */ -extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); - -/* McBSP signal muxing API */ -void omap2_mcbsp1_mux_clkr_src(u8 mux); -void omap2_mcbsp1_mux_fsr_src(u8 mux); - -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); - -/* Sidetone specific API */ -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); -int omap_st_enable(unsigned int id); -int omap_st_disable(unsigned int id); -int omap_st_is_enabled(unsigned int id); - #endif diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c deleted file mode 100644 index 4b15cd7926d7..000000000000 --- a/arch/arm/plat-omap/mcbsp.c +++ /dev/null @@ -1,1361 +0,0 @@ -/* - * linux/arch/arm/plat-omap/mcbsp.c - * - * Copyright (C) 2004 Nokia Corporation - * Author: Samuel Ortiz <samuel.ortiz@nokia.com> - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Multichannel mode not supported. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> - -#include <plat/mcbsp.h> -#include <linux/pm_runtime.h> - -struct omap_mcbsp **mcbsp_ptr; -int omap_mcbsp_count; - -#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count) -#define id_to_mcbsp_ptr(id) mcbsp_ptr[id]; - -static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) -{ - void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; - - if (mcbsp->pdata->reg_size == 2) { - ((u16 *)mcbsp->reg_cache)[reg] = (u16)val; - __raw_writew((u16)val, addr); - } else { - ((u32 *)mcbsp->reg_cache)[reg] = val; - __raw_writel(val, addr); - } -} - -static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) -{ - void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; - - if (mcbsp->pdata->reg_size == 2) { - return !from_cache ? __raw_readw(addr) : - ((u16 *)mcbsp->reg_cache)[reg]; - } else { - return !from_cache ? __raw_readl(addr) : - ((u32 *)mcbsp->reg_cache)[reg]; - } -} - -static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) -{ - __raw_writel(val, mcbsp->st_data->io_base_st + reg); -} - -static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) -{ - return __raw_readl(mcbsp->st_data->io_base_st + reg); -} - -#define MCBSP_READ(mcbsp, reg) \ - omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0) -#define MCBSP_WRITE(mcbsp, reg, val) \ - omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val) -#define MCBSP_READ_CACHE(mcbsp, reg) \ - omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1) - -#define MCBSP_ST_READ(mcbsp, reg) \ - omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg) -#define MCBSP_ST_WRITE(mcbsp, reg, val) \ - omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val) - -static void omap_mcbsp_dump_reg(u8 id) -{ - struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id); - - dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); - dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", - MCBSP_READ(mcbsp, DRR2)); - dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", - MCBSP_READ(mcbsp, DRR1)); - dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", - MCBSP_READ(mcbsp, DXR2)); - dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", - MCBSP_READ(mcbsp, DXR1)); - dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", - MCBSP_READ(mcbsp, SPCR2)); - dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", - MCBSP_READ(mcbsp, SPCR1)); - dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", - MCBSP_READ(mcbsp, RCR2)); - dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", - MCBSP_READ(mcbsp, RCR1)); - dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", - MCBSP_READ(mcbsp, XCR2)); - dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", - MCBSP_READ(mcbsp, XCR1)); - dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", - MCBSP_READ(mcbsp, SRGR2)); - dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", - MCBSP_READ(mcbsp, SRGR1)); - dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", - MCBSP_READ(mcbsp, PCR0)); - dev_dbg(mcbsp->dev, "***********************\n"); -} - -static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) -{ - struct omap_mcbsp *mcbsp_tx = dev_id; - u16 irqst_spcr2; - - irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2); - dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); - - if (irqst_spcr2 & XSYNC_ERR) { - dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", - irqst_spcr2); - /* Writing zero to XSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2)); - } - - return IRQ_HANDLED; -} - -static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) -{ - struct omap_mcbsp *mcbsp_rx = dev_id; - u16 irqst_spcr1; - - irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1); - dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); - - if (irqst_spcr1 & RSYNC_ERR) { - dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", - irqst_spcr1); - /* Writing zero to RSYNC_ERR clears the IRQ */ - MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); - } - - return IRQ_HANDLED; -} - -/* - * omap_mcbsp_config simply write a config to the - * appropriate McBSP. - * You either call this function or set the McBSP registers - * by yourself before calling omap_mcbsp_start(). - */ -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", - mcbsp->id, mcbsp->phys_base); - - /* We write the given config */ - MCBSP_WRITE(mcbsp, SPCR2, config->spcr2); - MCBSP_WRITE(mcbsp, SPCR1, config->spcr1); - MCBSP_WRITE(mcbsp, RCR2, config->rcr2); - MCBSP_WRITE(mcbsp, RCR1, config->rcr1); - MCBSP_WRITE(mcbsp, XCR2, config->xcr2); - MCBSP_WRITE(mcbsp, XCR1, config->xcr1); - MCBSP_WRITE(mcbsp, SRGR2, config->srgr2); - MCBSP_WRITE(mcbsp, SRGR1, config->srgr1); - MCBSP_WRITE(mcbsp, MCR2, config->mcr2); - MCBSP_WRITE(mcbsp, MCR1, config->mcr1); - MCBSP_WRITE(mcbsp, PCR0, config->pcr0); - if (mcbsp->pdata->has_ccr) { - MCBSP_WRITE(mcbsp, XCCR, config->xccr); - MCBSP_WRITE(mcbsp, RCCR, config->rccr); - } -} -EXPORT_SYMBOL(omap_mcbsp_config); - -/** - * omap_mcbsp_dma_params - returns the dma channel number - * @id - mcbsp id - * @stream - indicates the direction of data flow (rx or tx) - * - * Returns the dma channel number for the rx channel or tx channel - * based on the value of @stream for the requested mcbsp given by @id - */ -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (stream) - return mcbsp->dma_rx_sync; - else - return mcbsp->dma_tx_sync; -} -EXPORT_SYMBOL(omap_mcbsp_dma_ch_params); - -/** - * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register - * @id - mcbsp id - * @stream - indicates the direction of data flow (rx or tx) - * - * Returns the address of mcbsp data transmit register or data receive register - * to be used by DMA for transferring/receiving data based on the value of - * @stream for the requested mcbsp given by @id - */ -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream) -{ - struct omap_mcbsp *mcbsp; - int data_reg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->pdata->reg_size == 2) { - if (stream) - data_reg = OMAP_MCBSP_REG_DRR1; - else - data_reg = OMAP_MCBSP_REG_DXR1; - } else { - if (stream) - data_reg = OMAP_MCBSP_REG_DRR; - else - data_reg = OMAP_MCBSP_REG_DXR; - } - - return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; -} -EXPORT_SYMBOL(omap_mcbsp_dma_reg_params); - -static void omap_st_on(struct omap_mcbsp *mcbsp) -{ - unsigned int w; - - if (mcbsp->pdata->enable_st_clock) - mcbsp->pdata->enable_st_clock(mcbsp->id, 1); - - /* Enable McBSP Sidetone */ - w = MCBSP_READ(mcbsp, SSELCR); - MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN); - - /* Enable Sidetone from Sidetone Core */ - w = MCBSP_ST_READ(mcbsp, SSELCR); - MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN); -} - -static void omap_st_off(struct omap_mcbsp *mcbsp) -{ - unsigned int w; - - w = MCBSP_ST_READ(mcbsp, SSELCR); - MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); - - w = MCBSP_READ(mcbsp, SSELCR); - MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); - - if (mcbsp->pdata->enable_st_clock) - mcbsp->pdata->enable_st_clock(mcbsp->id, 0); -} - -static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) -{ - u16 val, i; - - val = MCBSP_ST_READ(mcbsp, SSELCR); - - if (val & ST_COEFFWREN) - MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); - - MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN); - - for (i = 0; i < 128; i++) - MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]); - - i = 0; - - val = MCBSP_ST_READ(mcbsp, SSELCR); - while (!(val & ST_COEFFWRDONE) && (++i < 1000)) - val = MCBSP_ST_READ(mcbsp, SSELCR); - - MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); - - if (i == 1000) - dev_err(mcbsp->dev, "McBSP FIR load error!\n"); -} - -static void omap_st_chgain(struct omap_mcbsp *mcbsp) -{ - u16 w; - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - w = MCBSP_ST_READ(mcbsp, SSELCR); - - MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \ - ST_CH1GAIN(st_data->ch1gain)); -} - -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENOENT; - - spin_lock_irq(&mcbsp->lock); - if (channel == 0) - st_data->ch0gain = chgain; - else if (channel == 1) - st_data->ch1gain = chgain; - else - ret = -EINVAL; - - if (st_data->enabled) - omap_st_chgain(mcbsp); - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_set_chgain); - -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENOENT; - - spin_lock_irq(&mcbsp->lock); - if (channel == 0) - *chgain = st_data->ch0gain; - else if (channel == 1) - *chgain = st_data->ch1gain; - else - ret = -EINVAL; - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_get_chgain); - -static int omap_st_start(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - if (st_data && st_data->enabled && !st_data->running) { - omap_st_fir_write(mcbsp, st_data->taps); - omap_st_chgain(mcbsp); - - if (!mcbsp->free) { - omap_st_on(mcbsp); - st_data->running = 1; - } - } - - return 0; -} - -int omap_st_enable(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - spin_lock_irq(&mcbsp->lock); - st_data->enabled = 1; - omap_st_start(mcbsp); - spin_unlock_irq(&mcbsp->lock); - - return 0; -} -EXPORT_SYMBOL(omap_st_enable); - -static int omap_st_stop(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - if (st_data && st_data->running) { - if (!mcbsp->free) { - omap_st_off(mcbsp); - st_data->running = 0; - } - } - - return 0; -} - -int omap_st_disable(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - int ret = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - spin_lock_irq(&mcbsp->lock); - omap_st_stop(mcbsp); - st_data->enabled = 0; - spin_unlock_irq(&mcbsp->lock); - - return ret; -} -EXPORT_SYMBOL(omap_st_disable); - -int omap_st_is_enabled(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_st_data *st_data; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - st_data = mcbsp->st_data; - - if (!st_data) - return -ENODEV; - - - return st_data->enabled; -} -EXPORT_SYMBOL(omap_st_is_enabled); - -/* - * omap_mcbsp_set_rx_threshold configures the transmit threshold in words. - * The threshold parameter is 1 based, and it is converted (threshold - 1) - * for the THRSH2 register. - */ -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return; - - if (threshold && threshold <= mcbsp->max_tx_thres) - MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); -} -EXPORT_SYMBOL(omap_mcbsp_set_tx_threshold); - -/* - * omap_mcbsp_set_rx_threshold configures the receive threshold in words. - * The threshold parameter is 1 based, and it is converted (threshold - 1) - * for the THRSH1 register. - */ -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return; - - if (threshold && threshold <= mcbsp->max_rx_thres) - MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); -} -EXPORT_SYMBOL(omap_mcbsp_set_rx_threshold); - -/* - * omap_mcbsp_get_max_tx_thres just return the current configured - * maximum threshold for transmission - */ -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->max_tx_thres; -} -EXPORT_SYMBOL(omap_mcbsp_get_max_tx_threshold); - -/* - * omap_mcbsp_get_max_rx_thres just return the current configured - * maximum threshold for reception - */ -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->max_rx_thres; -} -EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); - -u16 omap_mcbsp_get_fifo_size(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - return mcbsp->pdata->buffer_size; -} -EXPORT_SYMBOL(omap_mcbsp_get_fifo_size); - -/* - * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO - */ -u16 omap_mcbsp_get_tx_delay(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 buffstat; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return 0; - - /* Returns the number of free locations in the buffer */ - buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); - - /* Number of slots are different in McBSP ports */ - return mcbsp->pdata->buffer_size - buffstat; -} -EXPORT_SYMBOL(omap_mcbsp_get_tx_delay); - -/* - * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO - * to reach the threshold value (when the DMA will be triggered to read it) - */ -u16 omap_mcbsp_get_rx_delay(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 buffstat, threshold; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - if (mcbsp->pdata->buffer_size == 0) - return 0; - - /* Returns the number of used locations in the buffer */ - buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); - /* RX threshold */ - threshold = MCBSP_READ(mcbsp, THRSH1); - - /* Return the number of location till we reach the threshold limit */ - if (threshold <= buffstat) - return 0; - else - return threshold - buffstat; -} -EXPORT_SYMBOL(omap_mcbsp_get_rx_delay); - -/* - * omap_mcbsp_get_dma_op_mode just return the current configured - * operating mode for the mcbsp channel - */ -int omap_mcbsp_get_dma_op_mode(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - int dma_op_mode; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - dma_op_mode = mcbsp->dma_op_mode; - - return dma_op_mode; -} -EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); - -int omap_mcbsp_request(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - void *reg_cache; - int err; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); - if (!reg_cache) { - return -ENOMEM; - } - - spin_lock(&mcbsp->lock); - if (!mcbsp->free) { - dev_err(mcbsp->dev, "McBSP%d is currently in use\n", - mcbsp->id); - err = -EBUSY; - goto err_kfree; - } - - mcbsp->free = false; - mcbsp->reg_cache = reg_cache; - spin_unlock(&mcbsp->lock); - - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) - mcbsp->pdata->ops->request(id); - - pm_runtime_get_sync(mcbsp->dev); - - /* Enable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); - - /* - * Make sure that transmitter, receiver and sample-rate generator are - * not running before activating IRQs. - */ - MCBSP_WRITE(mcbsp, SPCR1, 0); - MCBSP_WRITE(mcbsp, SPCR2, 0); - - err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp->tx_irq, - mcbsp->id); - goto err_clk_disable; - } - - if (mcbsp->rx_irq) { - err = request_irq(mcbsp->rx_irq, - omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp->rx_irq, - mcbsp->id); - goto err_free_irq; - } - } - - return 0; -err_free_irq: - free_irq(mcbsp->tx_irq, (void *)mcbsp); -err_clk_disable: - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(id); - - /* Disable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - - pm_runtime_put_sync(mcbsp->dev); - - spin_lock(&mcbsp->lock); - mcbsp->free = true; - mcbsp->reg_cache = NULL; -err_kfree: - spin_unlock(&mcbsp->lock); - kfree(reg_cache); - - return err; -} -EXPORT_SYMBOL(omap_mcbsp_request); - -void omap_mcbsp_free(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - void *reg_cache; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(id); - - /* Disable wakeup behavior */ - if (mcbsp->pdata->has_wakeup) - MCBSP_WRITE(mcbsp, WAKEUPEN, 0); - - pm_runtime_put_sync(mcbsp->dev); - - if (mcbsp->rx_irq) - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - - reg_cache = mcbsp->reg_cache; - - spin_lock(&mcbsp->lock); - if (mcbsp->free) - dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id); - else - mcbsp->free = true; - mcbsp->reg_cache = NULL; - spin_unlock(&mcbsp->lock); - - if (reg_cache) - kfree(reg_cache); -} -EXPORT_SYMBOL(omap_mcbsp_free); - -/* - * Here we start the McBSP, by enabling transmitter, receiver or both. - * If no transmitter or receiver is active prior calling, then sample-rate - * generator and frame sync are started. - */ -void omap_mcbsp_start(unsigned int id, int tx, int rx) -{ - struct omap_mcbsp *mcbsp; - int enable_srg = 0; - u16 w; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (mcbsp->st_data) - omap_st_start(mcbsp); - - /* Only enable SRG, if McBSP is master */ - w = MCBSP_READ_CACHE(mcbsp, PCR0); - if (w & (FSXM | FSRM | CLKXM | CLKRM)) - enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - - if (enable_srg) { - /* Start the sample generator */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); - } - - /* Enable transmitter and receiver */ - tx &= 1; - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | tx); - - rx &= 1; - w = MCBSP_READ_CACHE(mcbsp, SPCR1); - MCBSP_WRITE(mcbsp, SPCR1, w | rx); - - /* - * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec - * REVISIT: 100us may give enough time for two CLKSRG, however - * due to some unknown PM related, clock gating etc. reason it - * is now at 500us. - */ - udelay(500); - - if (enable_srg) { - /* Start frame sync */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); - } - - if (mcbsp->pdata->has_ccr) { - /* Release the transmitter and receiver */ - w = MCBSP_READ_CACHE(mcbsp, XCCR); - w &= ~(tx ? XDISABLE : 0); - MCBSP_WRITE(mcbsp, XCCR, w); - w = MCBSP_READ_CACHE(mcbsp, RCCR); - w &= ~(rx ? RDISABLE : 0); - MCBSP_WRITE(mcbsp, RCCR, w); - } - - /* Dump McBSP Regs */ - omap_mcbsp_dump_reg(id); -} -EXPORT_SYMBOL(omap_mcbsp_start); - -void omap_mcbsp_stop(unsigned int id, int tx, int rx) -{ - struct omap_mcbsp *mcbsp; - int idle; - u16 w; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - - /* Reset transmitter */ - tx &= 1; - if (mcbsp->pdata->has_ccr) { - w = MCBSP_READ_CACHE(mcbsp, XCCR); - w |= (tx ? XDISABLE : 0); - MCBSP_WRITE(mcbsp, XCCR, w); - } - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w & ~tx); - - /* Reset receiver */ - rx &= 1; - if (mcbsp->pdata->has_ccr) { - w = MCBSP_READ_CACHE(mcbsp, RCCR); - w |= (rx ? RDISABLE : 0); - MCBSP_WRITE(mcbsp, RCCR, w); - } - w = MCBSP_READ_CACHE(mcbsp, SPCR1); - MCBSP_WRITE(mcbsp, SPCR1, w & ~rx); - - idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | - MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); - - if (idle) { - /* Reset the sample rate generator */ - w = MCBSP_READ_CACHE(mcbsp, SPCR2); - MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); - } - - if (mcbsp->st_data) - omap_st_stop(mcbsp); -} -EXPORT_SYMBOL(omap_mcbsp_stop); - -int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (!omap_mcbsp_check_valid_id(id)) { - pr_err("%s: Invalid id (%d)\n", __func__, id + 1); - return -EINVAL; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (fck_src_id == MCBSP_CLKS_PAD_SRC) - src = "clks_ext"; - else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) - src = "clks_fclk"; - else - return -EINVAL; - - if (mcbsp->pdata->set_clk_src) - return mcbsp->pdata->set_clk_src(mcbsp->dev, mcbsp->fclk, src); - else - return -EINVAL; -} -EXPORT_SYMBOL(omap2_mcbsp_set_clks_src); - -void omap2_mcbsp1_mux_clkr_src(u8 mux) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (mux == CLKR_SRC_CLKR) - src = "clkr"; - else if (mux == CLKR_SRC_CLKX) - src = "clkx"; - else - return; - - mcbsp = id_to_mcbsp_ptr(0); - if (mcbsp->pdata->mux_signal) - mcbsp->pdata->mux_signal(mcbsp->dev, "clkr", src); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src); - -void omap2_mcbsp1_mux_fsr_src(u8 mux) -{ - struct omap_mcbsp *mcbsp; - const char *src; - - if (mux == FSR_SRC_FSR) - src = "fsr"; - else if (mux == FSR_SRC_FSX) - src = "fsx"; - else - return; - - mcbsp = id_to_mcbsp_ptr(0); - if (mcbsp->pdata->mux_signal) - mcbsp->pdata->mux_signal(mcbsp->dev, "fsr", src); -} -EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src); - -#define max_thres(m) (mcbsp->pdata->buffer_size) -#define valid_threshold(m, val) ((val) <= max_thres(m)) -#define THRESHOLD_PROP_BUILDER(prop) \ -static ssize_t prop##_show(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%u\n", mcbsp->prop); \ -} \ - \ -static ssize_t prop##_store(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t size) \ -{ \ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ - unsigned long val; \ - int status; \ - \ - status = strict_strtoul(buf, 0, &val); \ - if (status) \ - return status; \ - \ - if (!valid_threshold(mcbsp, val)) \ - return -EDOM; \ - \ - mcbsp->prop = val; \ - return size; \ -} \ - \ -static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); - -THRESHOLD_PROP_BUILDER(max_tx_thres); -THRESHOLD_PROP_BUILDER(max_rx_thres); - -static const char *dma_op_modes[] = { - "element", "threshold", "frame", -}; - -static ssize_t dma_op_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - int dma_op_mode, i = 0; - ssize_t len = 0; - const char * const *s; - - dma_op_mode = mcbsp->dma_op_mode; - - for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { - if (dma_op_mode == i) - len += sprintf(buf + len, "[%s] ", *s); - else - len += sprintf(buf + len, "%s ", *s); - } - len += sprintf(buf + len, "\n"); - - return len; -} - -static ssize_t dma_op_mode_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - const char * const *s; - int i = 0; - - for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) - if (sysfs_streq(buf, *s)) - break; - - if (i == ARRAY_SIZE(dma_op_modes)) - return -EINVAL; - - spin_lock_irq(&mcbsp->lock); - if (!mcbsp->free) { - size = -EBUSY; - goto unlock; - } - mcbsp->dma_op_mode = i; - -unlock: - spin_unlock_irq(&mcbsp->lock); - - return size; -} - -static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); - -static const struct attribute *additional_attrs[] = { - &dev_attr_max_tx_thres.attr, - &dev_attr_max_rx_thres.attr, - &dev_attr_dma_op_mode.attr, - NULL, -}; - -static const struct attribute_group additional_attr_group = { - .attrs = (struct attribute **)additional_attrs, -}; - -static ssize_t st_taps_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - ssize_t status = 0; - int i; - - spin_lock_irq(&mcbsp->lock); - for (i = 0; i < st_data->nr_taps; i++) - status += sprintf(&buf[status], (i ? ", %d" : "%d"), - st_data->taps[i]); - if (i) - status += sprintf(&buf[status], "\n"); - spin_unlock_irq(&mcbsp->lock); - - return status; -} - -static ssize_t st_taps_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - int val, tmp, status, i = 0; - - spin_lock_irq(&mcbsp->lock); - memset(st_data->taps, 0, sizeof(st_data->taps)); - st_data->nr_taps = 0; - - do { - status = sscanf(buf, "%d%n", &val, &tmp); - if (status < 0 || status == 0) { - size = -EINVAL; - goto out; - } - if (val < -32768 || val > 32767) { - size = -EINVAL; - goto out; - } - st_data->taps[i++] = val; - buf += tmp; - if (*buf != ',') - break; - buf++; - } while (1); - - st_data->nr_taps = i; - -out: - spin_unlock_irq(&mcbsp->lock); - - return size; -} - -static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store); - -static const struct attribute *sidetone_attrs[] = { - &dev_attr_st_taps.attr, - NULL, -}; - -static const struct attribute_group sidetone_attr_group = { - .attrs = (struct attribute **)sidetone_attrs, -}; - -static int __devinit omap_st_add(struct omap_mcbsp *mcbsp, - struct resource *res) -{ - struct omap_mcbsp_st_data *st_data; - int err; - - st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL); - if (!st_data) { - err = -ENOMEM; - goto err1; - } - - st_data->io_base_st = ioremap(res->start, resource_size(res)); - if (!st_data->io_base_st) { - err = -ENOMEM; - goto err2; - } - - err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group); - if (err) - goto err3; - - mcbsp->st_data = st_data; - return 0; - -err3: - iounmap(st_data->io_base_st); -err2: - kfree(st_data); -err1: - return err; - -} - -static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp) -{ - struct omap_mcbsp_st_data *st_data = mcbsp->st_data; - - sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); - iounmap(st_data->io_base_st); - kfree(st_data); -} - -/* - * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. - * 730 has only 2 McBSP, and both of them are MPU peripherals. - */ -static int __devinit omap_mcbsp_probe(struct platform_device *pdev) -{ - struct omap_mcbsp_platform_data *pdata = pdev->dev.platform_data; - struct omap_mcbsp *mcbsp; - int id = pdev->id - 1; - struct resource *res; - int ret = 0; - - if (!pdata) { - dev_err(&pdev->dev, "McBSP device initialized without" - "platform data\n"); - ret = -EINVAL; - goto exit; - } - - dev_dbg(&pdev->dev, "Initializing OMAP McBSP (%d).\n", pdev->id); - - if (id >= omap_mcbsp_count) { - dev_err(&pdev->dev, "Invalid McBSP device id (%d)\n", id); - ret = -EINVAL; - goto exit; - } - - mcbsp = kzalloc(sizeof(struct omap_mcbsp), GFP_KERNEL); - if (!mcbsp) { - ret = -ENOMEM; - goto exit; - } - - spin_lock_init(&mcbsp->lock); - mcbsp->id = id + 1; - mcbsp->free = true; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); - if (!res) { - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid memory" - "resource\n", __func__, pdev->id); - ret = -ENOMEM; - goto exit; - } - } - mcbsp->phys_base = res->start; - mcbsp->reg_cache_size = resource_size(res); - mcbsp->io_base = ioremap(res->start, resource_size(res)); - if (!mcbsp->io_base) { - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); - if (!res) - mcbsp->phys_dma_base = mcbsp->phys_base; - else - mcbsp->phys_dma_base = res->start; - - mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); - mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); - - /* From OMAP4 there will be a single irq line */ - if (mcbsp->tx_irq == -ENXIO) - mcbsp->tx_irq = platform_get_irq(pdev, 0); - - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n", - __func__, pdev->id); - ret = -ENODEV; - goto err_res; - } - mcbsp->dma_rx_sync = res->start; - - res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!res) { - dev_err(&pdev->dev, "%s:mcbsp%d has invalid tx DMA channel\n", - __func__, pdev->id); - ret = -ENODEV; - goto err_res; - } - mcbsp->dma_tx_sync = res->start; - - mcbsp->fclk = clk_get(&pdev->dev, "fck"); - if (IS_ERR(mcbsp->fclk)) { - ret = PTR_ERR(mcbsp->fclk); - dev_err(&pdev->dev, "unable to get fck: %d\n", ret); - goto err_res; - } - - mcbsp->pdata = pdata; - mcbsp->dev = &pdev->dev; - mcbsp_ptr[id] = mcbsp; - platform_set_drvdata(pdev, mcbsp); - pm_runtime_enable(mcbsp->dev); - - mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; - if (mcbsp->pdata->buffer_size) { - /* - * Initially configure the maximum thresholds to a safe value. - * The McBSP FIFO usage with these values should not go under - * 16 locations. - * If the whole FIFO without safety buffer is used, than there - * is a possibility that the DMA will be not able to push the - * new data on time, causing channel shifts in runtime. - */ - mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; - mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; - - ret = sysfs_create_group(&mcbsp->dev->kobj, - &additional_attr_group); - if (ret) { - dev_err(mcbsp->dev, - "Unable to create additional controls\n"); - goto err_thres; - } - } else { - mcbsp->max_tx_thres = -EINVAL; - mcbsp->max_rx_thres = -EINVAL; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); - if (res) { - ret = omap_st_add(mcbsp, res); - if (ret) { - dev_err(mcbsp->dev, - "Unable to create sidetone controls\n"); - goto err_st; - } - } - - return 0; - -err_st: - if (mcbsp->pdata->buffer_size) - sysfs_remove_group(&mcbsp->dev->kobj, - &additional_attr_group); -err_thres: - clk_put(mcbsp->fclk); -err_res: - iounmap(mcbsp->io_base); -err_ioremap: - kfree(mcbsp); -exit: - return ret; -} - -static int __devexit omap_mcbsp_remove(struct platform_device *pdev) -{ - struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); - - platform_set_drvdata(pdev, NULL); - if (mcbsp) { - - if (mcbsp->pdata && mcbsp->pdata->ops && - mcbsp->pdata->ops->free) - mcbsp->pdata->ops->free(mcbsp->id); - - if (mcbsp->pdata->buffer_size) - sysfs_remove_group(&mcbsp->dev->kobj, - &additional_attr_group); - - if (mcbsp->st_data) - omap_st_remove(mcbsp); - - clk_put(mcbsp->fclk); - - iounmap(mcbsp->io_base); - kfree(mcbsp); - } - - return 0; -} - -static struct platform_driver omap_mcbsp_driver = { - .probe = omap_mcbsp_probe, - .remove = __devexit_p(omap_mcbsp_remove), - .driver = { - .name = "omap-mcbsp", - }, -}; - -int __init omap_mcbsp_init(void) -{ - /* Register the McBSP driver */ - return platform_driver_register(&omap_mcbsp_driver); -} diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 639e3ce6c264..9a91fe9de696 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -418,6 +418,11 @@ static struct platform_device qi_lb60_charger_device = { }, }; +/* audio */ +static struct platform_device qi_lb60_audio_device = { + .name = "qi-lb60-audio", + .id = -1, +}; static struct platform_device *jz_platform_devices[] __initdata = { &jz4740_udc_device, @@ -434,6 +439,7 @@ static struct platform_device *jz_platform_devices[] __initdata = { &qi_lb60_gpio_keys, &qi_lb60_pwm_beeper, &qi_lb60_charger_device, + &qi_lb60_audio_device, }; static void __init board_gpio_setup(void) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index cde7c0085ced..59daae2f29db 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -769,7 +769,9 @@ static struct platform_device camera_devices[] = { /* FSI */ static struct sh_fsi_platform_info fsi_info = { - .portb_flags = SH_FSI_BRS_INV, + .port_b = { + .flags = SH_FSI_BRS_INV, + }, }; static struct resource fsi_resources[] = { diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 2b07fc016950..59f4db829e91 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -278,7 +278,9 @@ static struct platform_device ceu1_device = { /* FSI */ /* change J20, J21, J22 pin to 1-2 connection to use slave mode */ static struct sh_fsi_platform_info fsi_info = { - .porta_flags = SH_FSI_BRS_INV, + .port_a = { + .flags = SH_FSI_BRS_INV, + }, }; static struct resource fsi_resources[] = { |