summaryrefslogtreecommitdiffstats
path: root/arch/xtensa
diff options
context:
space:
mode:
Diffstat (limited to 'arch/xtensa')
-rw-r--r--arch/xtensa/Kconfig3
-rw-r--r--arch/xtensa/boot/dts/xtfpga.dtsi12
-rw-r--r--arch/xtensa/include/asm/io.h2
-rw-r--r--arch/xtensa/include/asm/traps.h44
-rw-r--r--arch/xtensa/include/asm/vectors.h2
-rw-r--r--arch/xtensa/include/uapi/asm/unistd.h7
-rw-r--r--arch/xtensa/kernel/entry.S449
-rw-r--r--arch/xtensa/kernel/setup.c2
-rw-r--r--arch/xtensa/kernel/time.c1
-rw-r--r--arch/xtensa/kernel/vectors.S2
-rw-r--r--arch/xtensa/kernel/xtensa_ksyms.c2
-rw-r--r--arch/xtensa/mm/init.c13
-rw-r--r--arch/xtensa/mm/mmu.c2
-rw-r--r--arch/xtensa/platforms/xtfpga/setup.c7
-rw-r--r--arch/xtensa/variants/fsf/include/variant/tie.h9
15 files changed, 297 insertions, 260 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index ba56e11cbf77..c87ae7c6e5f9 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -20,6 +20,7 @@ config XTENSA
select HAVE_FUNCTION_TRACER
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_PERF_EVENTS
+ select COMMON_CLK
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
primarily for embedded systems. These processors are both
@@ -80,7 +81,6 @@ choice
config XTENSA_VARIANT_FSF
bool "fsf - default (not generic) configuration"
select MMU
- select HAVE_XTENSA_GPIO32
config XTENSA_VARIANT_DC232B
bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
@@ -135,7 +135,6 @@ config HAVE_SMP
config SMP
bool "Enable Symmetric multi-processing support"
depends on HAVE_SMP
- select USE_GENERIC_SMP_HELPERS
select GENERIC_SMP_IDLE_THREAD
help
Enabled SMP Software; allows more than one CPU/CORE
diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
index 46b4f5eab421..e7370b11348e 100644
--- a/arch/xtensa/boot/dts/xtfpga.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -35,6 +35,13 @@
interrupt-controller;
};
+ clocks {
+ osc: main-oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+ };
+
serial0: serial@fd050020 {
device_type = "serial";
compatible = "ns16550a";
@@ -42,9 +49,7 @@
reg = <0xfd050020 0x20>;
reg-shift = <2>;
interrupts = <0 1>; /* external irq 0 */
- /* Filled in by platform_setup from FPGA register
- * clock-frequency = <100000000>;
- */
+ clocks = <&osc>;
};
enet0: ethoc@fd030000 {
@@ -52,5 +57,6 @@
reg = <0xfd030000 0x4000 0xfd800000 0x4000>;
interrupts = <1 1>; /* external irq 1 */
local-mac-address = [00 50 c2 13 6f 00];
+ clocks = <&osc>;
};
};
diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h
index 2a042d430c25..74944207167e 100644
--- a/arch/xtensa/include/asm/io.h
+++ b/arch/xtensa/include/asm/io.h
@@ -25,7 +25,7 @@
#ifdef CONFIG_MMU
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
extern unsigned long xtensa_kio_paddr;
static inline unsigned long xtensa_get_kio_paddr(void)
diff --git a/arch/xtensa/include/asm/traps.h b/arch/xtensa/include/asm/traps.h
index 8c194f6af45e..677bfcf4ee5d 100644
--- a/arch/xtensa/include/asm/traps.h
+++ b/arch/xtensa/include/asm/traps.h
@@ -23,25 +23,37 @@ void secondary_trap_init(void);
static inline void spill_registers(void)
{
-
+#if XCHAL_NUM_AREGS > 16
__asm__ __volatile__ (
- "movi a14, "__stringify((1 << PS_EXCM_BIT) | LOCKLEVEL)"\n\t"
- "mov a12, a0\n\t"
- "rsr a13, sar\n\t"
- "xsr a14, ps\n\t"
- "movi a0, _spill_registers\n\t"
- "rsync\n\t"
- "callx0 a0\n\t"
- "mov a0, a12\n\t"
- "wsr a13, sar\n\t"
- "wsr a14, ps\n\t"
- : :
-#if defined(CONFIG_FRAME_POINTER)
- : "a2", "a3", "a4", "a11", "a12", "a13", "a14", "a15",
+ " call12 1f\n"
+ " _j 2f\n"
+ " retw\n"
+ " .align 4\n"
+ "1:\n"
+ " _entry a1, 48\n"
+ " addi a12, a0, 3\n"
+#if XCHAL_NUM_AREGS > 32
+ " .rept (" __stringify(XCHAL_NUM_AREGS) " - 32) / 12\n"
+ " _entry a1, 48\n"
+ " mov a12, a0\n"
+ " .endr\n"
+#endif
+ " _entry a1, 48\n"
+#if XCHAL_NUM_AREGS % 12 == 0
+ " mov a8, a8\n"
+#elif XCHAL_NUM_AREGS % 12 == 4
+ " mov a12, a12\n"
+#elif XCHAL_NUM_AREGS % 12 == 8
+ " mov a4, a4\n"
+#endif
+ " retw\n"
+ "2:\n"
+ : : : "a12", "a13", "memory");
#else
- : "a2", "a3", "a4", "a7", "a11", "a12", "a13", "a14", "a15",
+ __asm__ __volatile__ (
+ " mov a12, a12\n"
+ : : : "memory");
#endif
- "memory");
}
#endif /* _XTENSA_TRAPS_H */
diff --git a/arch/xtensa/include/asm/vectors.h b/arch/xtensa/include/asm/vectors.h
index 5791b45d5a5d..f74ddfbb92ef 100644
--- a/arch/xtensa/include/asm/vectors.h
+++ b/arch/xtensa/include/asm/vectors.h
@@ -25,7 +25,7 @@
#define XCHAL_KIO_DEFAULT_PADDR 0xf0000000
#define XCHAL_KIO_SIZE 0x10000000
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
#define XCHAL_KIO_PADDR xtensa_get_kio_paddr()
#else
#define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index 51940fec6990..b9395529f02d 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -734,7 +734,12 @@ __SYSCALL(332, sys_finit_module, 3)
#define __NR_accept4 333
__SYSCALL(333, sys_accept4, 4)
-#define __NR_syscall_count 334
+#define __NR_sched_setattr 334
+__SYSCALL(334, sys_sched_setattr, 2)
+#define __NR_sched_getattr 335
+__SYSCALL(335, sys_sched_getattr, 3)
+
+#define __NR_syscall_count 336
/*
* sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S
index 21dbe6bdb8ed..ef7f4990722b 100644
--- a/arch/xtensa/kernel/entry.S
+++ b/arch/xtensa/kernel/entry.S
@@ -1081,196 +1081,53 @@ ENTRY(fast_syscall_spill_registers)
rsr a0, sar
s32i a3, a2, PT_AREG3
- s32i a4, a2, PT_AREG4
- s32i a0, a2, PT_AREG5 # store SAR to PT_AREG5
+ s32i a0, a2, PT_SAR
- /* The spill routine might clobber a7, a11, and a15. */
+ /* The spill routine might clobber a4, a7, a8, a11, a12, and a15. */
+ s32i a4, a2, PT_AREG4
s32i a7, a2, PT_AREG7
+ s32i a8, a2, PT_AREG8
s32i a11, a2, PT_AREG11
+ s32i a12, a2, PT_AREG12
s32i a15, a2, PT_AREG15
- call0 _spill_registers # destroys a3, a4, and SAR
-
- /* Advance PC, restore registers and SAR, and return from exception. */
-
- l32i a3, a2, PT_AREG5
- l32i a4, a2, PT_AREG4
- l32i a0, a2, PT_AREG0
- wsr a3, sar
- l32i a3, a2, PT_AREG3
-
- /* Restore clobbered registers. */
-
- l32i a7, a2, PT_AREG7
- l32i a11, a2, PT_AREG11
- l32i a15, a2, PT_AREG15
-
- movi a2, 0
- rfe
-
-ENDPROC(fast_syscall_spill_registers)
-
-/* Fixup handler.
- *
- * We get here if the spill routine causes an exception, e.g. tlb miss.
- * We basically restore WINDOWBASE and WINDOWSTART to the condition when
- * we entered the spill routine and jump to the user exception handler.
- *
- * a0: value of depc, original value in depc
- * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
- * a3: exctable, original value in excsave1
- */
-
-ENTRY(fast_syscall_spill_registers_fixup)
-
- rsr a2, windowbase # get current windowbase (a2 is saved)
- xsr a0, depc # restore depc and a0
- ssl a2 # set shift (32 - WB)
-
- /* We need to make sure the current registers (a0-a3) are preserved.
- * To do this, we simply set the bit for the current window frame
- * in WS, so that the exception handlers save them to the task stack.
- */
-
- xsr a3, excsave1 # get spill-mask
- slli a3, a3, 1 # shift left by one
-
- slli a2, a3, 32-WSBITS
- src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy......
- wsr a2, windowstart # set corrected windowstart
-
- srli a3, a3, 1
- rsr a2, excsave1
- l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2
- xsr a2, excsave1
- s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3
- l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task)
- xsr a2, excsave1
-
- /* Return to the original (user task) WINDOWBASE.
- * We leave the following frame behind:
- * a0, a1, a2 same
- * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE)
- * depc: depc (we have to return to that address)
- * excsave_1: exctable
- */
-
- wsr a3, windowbase
- rsync
-
- /* We are now in the original frame when we entered _spill_registers:
- * a0: return address
- * a1: used, stack pointer
- * a2: kernel stack pointer
- * a3: available
- * depc: exception address
- * excsave: exctable
- * Note: This frame might be the same as above.
- */
-
- /* Setup stack pointer. */
-
- addi a2, a2, -PT_USER_SIZE
- s32i a0, a2, PT_AREG0
-
- /* Make sure we return to this fixup handler. */
-
- movi a3, fast_syscall_spill_registers_fixup_return
- s32i a3, a2, PT_DEPC # setup depc
-
- /* Jump to the exception handler. */
-
- rsr a3, excsave1
- rsr a0, exccause
- addx4 a0, a0, a3 # find entry in table
- l32i a0, a0, EXC_TABLE_FAST_USER # load handler
- l32i a3, a3, EXC_TABLE_DOUBLE_SAVE
- jx a0
-
-ENDPROC(fast_syscall_spill_registers_fixup)
-
-ENTRY(fast_syscall_spill_registers_fixup_return)
-
- /* When we return here, all registers have been restored (a2: DEPC) */
-
- wsr a2, depc # exception address
-
- /* Restore fixup handler. */
-
- rsr a2, excsave1
- s32i a3, a2, EXC_TABLE_DOUBLE_SAVE
- movi a3, fast_syscall_spill_registers_fixup
- s32i a3, a2, EXC_TABLE_FIXUP
- rsr a3, windowbase
- s32i a3, a2, EXC_TABLE_PARAM
- l32i a2, a2, EXC_TABLE_KSTK
-
- /* Load WB at the time the exception occurred. */
-
- rsr a3, sar # WB is still in SAR
- neg a3, a3
- wsr a3, windowbase
- rsync
-
- rsr a3, excsave1
- l32i a3, a3, EXC_TABLE_DOUBLE_SAVE
-
- rfde
-
-ENDPROC(fast_syscall_spill_registers_fixup_return)
-
-/*
- * spill all registers.
- *
- * This is not a real function. The following conditions must be met:
- *
- * - must be called with call0.
- * - uses a3, a4 and SAR.
- * - the last 'valid' register of each frame are clobbered.
- * - the caller must have registered a fixup handler
- * (or be inside a critical section)
- * - PS_EXCM must be set (PS_WOE cleared?)
- */
-
-ENTRY(_spill_registers)
-
/*
* Rotate ws so that the current windowbase is at bit 0.
* Assume ws = xxxwww1yy (www1 current window frame).
* Rotate ws right so that a4 = yyxxxwww1.
*/
- rsr a4, windowbase
+ rsr a0, windowbase
rsr a3, windowstart # a3 = xxxwww1yy
- ssr a4 # holds WB
- slli a4, a3, WSBITS
- or a3, a3, a4 # a3 = xxxwww1yyxxxwww1yy
+ ssr a0 # holds WB
+ slli a0, a3, WSBITS
+ or a3, a3, a0 # a3 = xxxwww1yyxxxwww1yy
srl a3, a3 # a3 = 00xxxwww1yyxxxwww1
/* We are done if there are no more than the current register frame. */
extui a3, a3, 1, WSBITS-1 # a3 = 0yyxxxwww
- movi a4, (1 << (WSBITS-1))
+ movi a0, (1 << (WSBITS-1))
_beqz a3, .Lnospill # only one active frame? jump
/* We want 1 at the top, so that we return to the current windowbase */
- or a3, a3, a4 # 1yyxxxwww
+ or a3, a3, a0 # 1yyxxxwww
/* Skip empty frames - get 'oldest' WINDOWSTART-bit. */
wsr a3, windowstart # save shifted windowstart
- neg a4, a3
- and a3, a4, a3 # first bit set from right: 000010000
+ neg a0, a3
+ and a3, a0, a3 # first bit set from right: 000010000
- ffs_ws a4, a3 # a4: shifts to skip empty frames
+ ffs_ws a0, a3 # a0: shifts to skip empty frames
movi a3, WSBITS
- sub a4, a3, a4 # WSBITS-a4:number of 0-bits from right
- ssr a4 # save in SAR for later.
+ sub a0, a3, a0 # WSBITS-a0:number of 0-bits from right
+ ssr a0 # save in SAR for later.
rsr a3, windowbase
- add a3, a3, a4
+ add a3, a3, a0
wsr a3, windowbase
rsync
@@ -1285,22 +1142,6 @@ ENTRY(_spill_registers)
* we have to save 4,8. or 12 registers.
*/
- _bbsi.l a3, 1, .Lc4
- _bbsi.l a3, 2, .Lc8
-
- /* Special case: we have a call12-frame starting at a4. */
-
- _bbci.l a3, 3, .Lc12 # bit 3 shouldn't be zero! (Jump to Lc12 first)
-
- s32e a4, a1, -16 # a1 is valid with an empty spill area
- l32e a4, a5, -12
- s32e a8, a4, -48
- mov a8, a4
- l32e a4, a1, -16
- j .Lc12c
-
-.Lnospill:
- ret
.Lloop: _bbsi.l a3, 1, .Lc4
_bbci.l a3, 2, .Lc12
@@ -1314,20 +1155,10 @@ ENTRY(_spill_registers)
s32e a9, a4, -28
s32e a10, a4, -24
s32e a11, a4, -20
-
srli a11, a3, 2 # shift windowbase by 2
rotw 2
_bnei a3, 1, .Lloop
-
-.Lexit: /* Done. Do the final rotation, set WS, and return. */
-
- rotw 1
- rsr a3, windowbase
- ssl a3
- movi a3, 1
- sll a3, a3
- wsr a3, windowstart
- ret
+ j .Lexit
.Lc4: s32e a4, a9, -16
s32e a5, a9, -12
@@ -1343,11 +1174,11 @@ ENTRY(_spill_registers)
/* 12-register frame (call12) */
- l32e a2, a5, -12
- s32e a8, a2, -48
- mov a8, a2
+ l32e a0, a5, -12
+ s32e a8, a0, -48
+ mov a8, a0
-.Lc12c: s32e a9, a8, -44
+ s32e a9, a8, -44
s32e a10, a8, -40
s32e a11, a8, -36
s32e a12, a8, -32
@@ -1367,30 +1198,54 @@ ENTRY(_spill_registers)
*/
rotw 1
- mov a5, a13
+ mov a4, a13
rotw -1
- s32e a4, a9, -16
- s32e a5, a9, -12
- s32e a6, a9, -8
- s32e a7, a9, -4
+ s32e a4, a8, -16
+ s32e a5, a8, -12
+ s32e a6, a8, -8
+ s32e a7, a8, -4
rotw 3
_beqi a3, 1, .Lexit
j .Lloop
-.Linvalid_mask:
+.Lexit:
- /* We get here because of an unrecoverable error in the window
- * registers. If we are in user space, we kill the application,
- * however, this condition is unrecoverable in kernel space.
- */
+ /* Done. Do the final rotation and set WS */
+
+ rotw 1
+ rsr a3, windowbase
+ ssl a3
+ movi a3, 1
+ sll a3, a3
+ wsr a3, windowstart
+.Lnospill:
+
+ /* Advance PC, restore registers and SAR, and return from exception. */
+
+ l32i a3, a2, PT_SAR
+ l32i a0, a2, PT_AREG0
+ wsr a3, sar
+ l32i a3, a2, PT_AREG3
- rsr a0, ps
- _bbci.l a0, PS_UM_BIT, 1f
+ /* Restore clobbered registers. */
- /* User space: Setup a dummy frame and kill application.
+ l32i a4, a2, PT_AREG4
+ l32i a7, a2, PT_AREG7
+ l32i a8, a2, PT_AREG8
+ l32i a11, a2, PT_AREG11
+ l32i a12, a2, PT_AREG12
+ l32i a15, a2, PT_AREG15
+
+ movi a2, 0
+ rfe
+
+.Linvalid_mask:
+
+ /* We get here because of an unrecoverable error in the window
+ * registers, so set up a dummy frame and kill the user application.
* Note: We assume EXC_TABLE_KSTK contains a valid stack pointer.
*/
@@ -1414,14 +1269,136 @@ ENTRY(_spill_registers)
movi a4, do_exit
callx4 a4
-1: /* Kernel space: PANIC! */
+ /* shouldn't return, so panic */
wsr a0, excsave1
movi a0, unrecoverable_exception
callx0 a0 # should not return
1: j 1b
-ENDPROC(_spill_registers)
+
+ENDPROC(fast_syscall_spill_registers)
+
+/* Fixup handler.
+ *
+ * We get here if the spill routine causes an exception, e.g. tlb miss.
+ * We basically restore WINDOWBASE and WINDOWSTART to the condition when
+ * we entered the spill routine and jump to the user exception handler.
+ *
+ * Note that we only need to restore the bits in windowstart that have not
+ * been spilled yet by the _spill_register routine. Luckily, a3 contains a
+ * rotated windowstart with only those bits set for frames that haven't been
+ * spilled yet. Because a3 is rotated such that bit 0 represents the register
+ * frame for the current windowbase - 1, we need to rotate a3 left by the
+ * value of the current windowbase + 1 and move it to windowstart.
+ *
+ * a0: value of depc, original value in depc
+ * a2: trashed, original value in EXC_TABLE_DOUBLE_SAVE
+ * a3: exctable, original value in excsave1
+ */
+
+ENTRY(fast_syscall_spill_registers_fixup)
+
+ rsr a2, windowbase # get current windowbase (a2 is saved)
+ xsr a0, depc # restore depc and a0
+ ssl a2 # set shift (32 - WB)
+
+ /* We need to make sure the current registers (a0-a3) are preserved.
+ * To do this, we simply set the bit for the current window frame
+ * in WS, so that the exception handlers save them to the task stack.
+ *
+ * Note: we use a3 to set the windowbase, so we take a special care
+ * of it, saving it in the original _spill_registers frame across
+ * the exception handler call.
+ */
+
+ xsr a3, excsave1 # get spill-mask
+ slli a3, a3, 1 # shift left by one
+ addi a3, a3, 1 # set the bit for the current window frame
+
+ slli a2, a3, 32-WSBITS
+ src a2, a3, a2 # a2 = xxwww1yyxxxwww1yy......
+ wsr a2, windowstart # set corrected windowstart
+
+ srli a3, a3, 1
+ rsr a2, excsave1
+ l32i a2, a2, EXC_TABLE_DOUBLE_SAVE # restore a2
+ xsr a2, excsave1
+ s32i a3, a2, EXC_TABLE_DOUBLE_SAVE # save a3
+ l32i a3, a2, EXC_TABLE_PARAM # original WB (in user task)
+ xsr a2, excsave1
+
+ /* Return to the original (user task) WINDOWBASE.
+ * We leave the following frame behind:
+ * a0, a1, a2 same
+ * a3: trashed (saved in EXC_TABLE_DOUBLE_SAVE)
+ * depc: depc (we have to return to that address)
+ * excsave_1: exctable
+ */
+
+ wsr a3, windowbase
+ rsync
+
+ /* We are now in the original frame when we entered _spill_registers:
+ * a0: return address
+ * a1: used, stack pointer
+ * a2: kernel stack pointer
+ * a3: available
+ * depc: exception address
+ * excsave: exctable
+ * Note: This frame might be the same as above.
+ */
+
+ /* Setup stack pointer. */
+
+ addi a2, a2, -PT_USER_SIZE
+ s32i a0, a2, PT_AREG0
+
+ /* Make sure we return to this fixup handler. */
+
+ movi a3, fast_syscall_spill_registers_fixup_return
+ s32i a3, a2, PT_DEPC # setup depc
+
+ /* Jump to the exception handler. */
+
+ rsr a3, excsave1
+ rsr a0, exccause
+ addx4 a0, a0, a3 # find entry in table
+ l32i a0, a0, EXC_TABLE_FAST_USER # load handler
+ l32i a3, a3, EXC_TABLE_DOUBLE_SAVE
+ jx a0
+
+ENDPROC(fast_syscall_spill_registers_fixup)
+
+ENTRY(fast_syscall_spill_registers_fixup_return)
+
+ /* When we return here, all registers have been restored (a2: DEPC) */
+
+ wsr a2, depc # exception address
+
+ /* Restore fixup handler. */
+
+ rsr a2, excsave1
+ s32i a3, a2, EXC_TABLE_DOUBLE_SAVE
+ movi a3, fast_syscall_spill_registers_fixup
+ s32i a3, a2, EXC_TABLE_FIXUP
+ rsr a3, windowbase
+ s32i a3, a2, EXC_TABLE_PARAM
+ l32i a2, a2, EXC_TABLE_KSTK
+
+ /* Load WB at the time the exception occurred. */
+
+ rsr a3, sar # WB is still in SAR
+ neg a3, a3
+ wsr a3, windowbase
+ rsync
+
+ rsr a3, excsave1
+ l32i a3, a3, EXC_TABLE_DOUBLE_SAVE
+
+ rfde
+
+ENDPROC(fast_syscall_spill_registers_fixup_return)
#ifdef CONFIG_MMU
/*
@@ -1794,6 +1771,43 @@ ENTRY(system_call)
ENDPROC(system_call)
+/*
+ * Spill live registers on the kernel stack macro.
+ *
+ * Entry condition: ps.woe is set, ps.excm is cleared
+ * Exit condition: windowstart has single bit set
+ * May clobber: a12, a13
+ */
+ .macro spill_registers_kernel
+
+#if XCHAL_NUM_AREGS > 16
+ call12 1f
+ _j 2f
+ retw
+ .align 4
+1:
+ _entry a1, 48
+ addi a12, a0, 3
+#if XCHAL_NUM_AREGS > 32
+ .rept (XCHAL_NUM_AREGS - 32) / 12
+ _entry a1, 48
+ mov a12, a0
+ .endr
+#endif
+ _entry a1, 48
+#if XCHAL_NUM_AREGS % 12 == 0
+ mov a8, a8
+#elif XCHAL_NUM_AREGS % 12 == 4
+ mov a12, a12
+#elif XCHAL_NUM_AREGS % 12 == 8
+ mov a4, a4
+#endif
+ retw
+2:
+#else
+ mov a12, a12
+#endif
+ .endm
/*
* Task switch.
@@ -1806,21 +1820,20 @@ ENTRY(_switch_to)
entry a1, 16
- mov a12, a2 # preserve 'prev' (a2)
- mov a13, a3 # and 'next' (a3)
+ mov a10, a2 # preserve 'prev' (a2)
+ mov a11, a3 # and 'next' (a3)
l32i a4, a2, TASK_THREAD_INFO
l32i a5, a3, TASK_THREAD_INFO
- save_xtregs_user a4 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
+ save_xtregs_user a4 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
- s32i a0, a12, THREAD_RA # save return address
- s32i a1, a12, THREAD_SP # save stack pointer
+ s32i a0, a10, THREAD_RA # save return address
+ s32i a1, a10, THREAD_SP # save stack pointer
/* Disable ints while we manipulate the stack pointer. */
- movi a14, (1 << PS_EXCM_BIT) | LOCKLEVEL
- xsr a14, ps
+ rsil a14, LOCKLEVEL
rsr a3, excsave1
rsync
s32i a3, a3, EXC_TABLE_FIXUP /* enter critical section */
@@ -1835,7 +1848,7 @@ ENTRY(_switch_to)
/* Flush register file. */
- call0 _spill_registers # destroys a3, a4, and SAR
+ spill_registers_kernel
/* Set kernel stack (and leave critical section)
* Note: It's save to set it here. The stack will not be overwritten
@@ -1851,13 +1864,13 @@ ENTRY(_switch_to)
/* restore context of the task 'next' */
- l32i a0, a13, THREAD_RA # restore return address
- l32i a1, a13, THREAD_SP # restore stack pointer
+ l32i a0, a11, THREAD_RA # restore return address
+ l32i a1, a11, THREAD_SP # restore stack pointer
- load_xtregs_user a5 a6 a8 a9 a10 a11 THREAD_XTREGS_USER
+ load_xtregs_user a5 a6 a8 a9 a12 a13 THREAD_XTREGS_USER
wsr a14, ps
- mov a2, a12 # return 'prev'
+ mov a2, a10 # return 'prev'
rsync
retw
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 7d12af1317f1..84fe931bb60e 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -22,6 +22,7 @@
#include <linux/bootmem.h>
#include <linux/kernel.h>
#include <linux/percpu.h>
+#include <linux/clk-provider.h>
#include <linux/cpu.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
@@ -276,6 +277,7 @@ void __init early_init_devtree(void *params)
static int __init xtensa_device_probe(void)
{
+ of_clk_init(NULL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
return 0;
}
diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c
index 08b769d3b3a1..2a1823de69cc 100644
--- a/arch/xtensa/kernel/time.c
+++ b/arch/xtensa/kernel/time.c
@@ -30,6 +30,7 @@
#include <asm/platform.h>
unsigned long ccount_freq; /* ccount Hz */
+EXPORT_SYMBOL(ccount_freq);
static cycle_t ccount_read(struct clocksource *cs)
{
diff --git a/arch/xtensa/kernel/vectors.S b/arch/xtensa/kernel/vectors.S
index cb8fd44caabc..f9e1ec346e35 100644
--- a/arch/xtensa/kernel/vectors.S
+++ b/arch/xtensa/kernel/vectors.S
@@ -235,7 +235,7 @@ ENTRY(_DoubleExceptionVector)
/* Check for overflow/underflow exception, jump if overflow. */
- _bbci.l a0, 6, _DoubleExceptionVector_WindowOverflow
+ bbci.l a0, 6, _DoubleExceptionVector_WindowOverflow
/*
* Restart window underflow exception.
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 74a60c7e085e..80b33ed51f31 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -122,9 +122,7 @@ EXPORT_SYMBOL(insw);
EXPORT_SYMBOL(insl);
extern long common_exception_return;
-extern long _spill_registers;
EXPORT_SYMBOL(common_exception_return);
-EXPORT_SYMBOL(_spill_registers);
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(_mcount);
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 479d7537a32a..aff108df92d3 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -90,7 +90,7 @@ int __init mem_reserve(unsigned long start, unsigned long end, int must_exist)
/*
- * Initialize the bootmem system and give it all the memory we have available.
+ * Initialize the bootmem system and give it all low memory we have available.
*/
void __init bootmem_init(void)
@@ -142,9 +142,14 @@ void __init bootmem_init(void)
/* Add all remaining memory pieces into the bootmem map */
- for (i=0; i<sysmem.nr_banks; i++)
- free_bootmem(sysmem.bank[i].start,
- sysmem.bank[i].end - sysmem.bank[i].start);
+ for (i = 0; i < sysmem.nr_banks; i++) {
+ if (sysmem.bank[i].start >> PAGE_SHIFT < max_low_pfn) {
+ unsigned long end = min(max_low_pfn << PAGE_SHIFT,
+ sysmem.bank[i].end);
+ free_bootmem(sysmem.bank[i].start,
+ end - sysmem.bank[i].start);
+ }
+ }
}
diff --git a/arch/xtensa/mm/mmu.c b/arch/xtensa/mm/mmu.c
index 36ec171698b8..861203e958da 100644
--- a/arch/xtensa/mm/mmu.c
+++ b/arch/xtensa/mm/mmu.c
@@ -39,7 +39,7 @@ void init_mmu(void)
set_itlbcfg_register(0);
set_dtlbcfg_register(0);
#endif
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && CONFIG_OF
+#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
/*
* Update the IO area mapping in case xtensa_kio_paddr has changed
*/
diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c
index 800227862fe8..57fd08b36f51 100644
--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -135,11 +135,11 @@ static void __init update_local_mac(struct device_node *node)
static int __init machine_setup(void)
{
- struct device_node *serial;
+ struct device_node *clock;
struct device_node *eth = NULL;
- for_each_compatible_node(serial, NULL, "ns16550a")
- update_clock_frequency(serial);
+ for_each_node_by_name(clock, "main-oscillator")
+ update_clock_frequency(clock);
if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
update_local_mac(eth);
@@ -290,6 +290,7 @@ static int __init xtavnet_init(void)
* knows whether they set it correctly on the DIP switches.
*/
pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
+ ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR;
return 0;
}
diff --git a/arch/xtensa/variants/fsf/include/variant/tie.h b/arch/xtensa/variants/fsf/include/variant/tie.h
index bf4020116df5..244cdea4dee5 100644
--- a/arch/xtensa/variants/fsf/include/variant/tie.h
+++ b/arch/xtensa/variants/fsf/include/variant/tie.h
@@ -18,13 +18,6 @@
#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
-/* Basic parameters of each coprocessor: */
-#define XCHAL_CP7_NAME "XTIOP"
-#define XCHAL_CP7_IDENT XTIOP
-#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
-#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
-#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
-
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_NCP_SA_SIZE 0
#define XCHAL_NCP_SA_ALIGN 1
@@ -42,6 +35,8 @@
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP6_SA_SIZE 0
#define XCHAL_CP6_SA_ALIGN 1
+#define XCHAL_CP7_SA_SIZE 0
+#define XCHAL_CP7_SA_ALIGN 1
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 0