diff options
Diffstat (limited to 'arch/xtensa')
| -rw-r--r-- | arch/xtensa/Kconfig | 30 | ||||
| -rw-r--r-- | arch/xtensa/boot/dts/xtfpga.dtsi | 64 | ||||
| -rw-r--r-- | arch/xtensa/configs/audio_kc705_defconfig | 142 | ||||
| -rw-r--r-- | arch/xtensa/include/uapi/asm/unistd.h | 8 | ||||
| -rw-r--r-- | arch/xtensa/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/Makefile | 3 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/include/platform/hardware.h | 3 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/include/platform/lcd.h | 15 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xtfpga/lcd.c | 55 |
9 files changed, 294 insertions, 27 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index e31d4949124a..87be10e8b57a 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -428,6 +428,36 @@ config DEFAULT_MEM_SIZE If unsure, leave the default value here. +config XTFPGA_LCD + bool "Enable XTFPGA LCD driver" + depends on XTENSA_PLATFORM_XTFPGA + default n + help + There's a 2x16 LCD on most of XTFPGA boards, kernel may output + progress messages there during bootup/shutdown. It may be useful + during board bringup. + + If unsure, say N. + +config XTFPGA_LCD_BASE_ADDR + hex "XTFPGA LCD base address" + depends on XTFPGA_LCD + default "0x0d0c0000" + help + Base address of the LCD controller inside KIO region. + Different boards from XTFPGA family have LCD controller at different + addresses. Please consult prototyping user guide for your board for + the correct address. Wrong address here may lead to hardware lockup. + +config XTFPGA_LCD_8BIT_ACCESS + bool "Use 8-bit access to XTFPGA LCD" + depends on XTFPGA_LCD + default n + help + LCD may be connected with 4- or 8-bit interface, 8-bit access may + only be used with 8-bit interface. Please consult prototyping user + guide for your board for the correct interface width. + endmenu menu "Executable file formats" diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi index dec9178840f6..cd0b9e34adc8 100644 --- a/arch/xtensa/boot/dts/xtfpga.dtsi +++ b/arch/xtensa/boot/dts/xtfpga.dtsi @@ -40,6 +40,12 @@ #clock-cells = <0>; compatible = "fixed-clock"; }; + + clk54: clk54 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <54000000>; + }; }; soc { @@ -65,5 +71,63 @@ local-mac-address = [00 50 c2 13 6f 00]; clocks = <&osc>; }; + + i2s0: xtfpga-i2s@0d080000 { + #sound-dai-cells = <0>; + compatible = "cdns,xtfpga-i2s"; + reg = <0x0d080000 0x40>; + interrupts = <2 1>; /* external irq 2 */ + clocks = <&cdce706 4>; + }; + + i2c0: i2c-master@0d090000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0d090000 0x20>; + reg-shift = <2>; + reg-io-width = <1>; + interrupts = <4 1>; + clocks = <&osc>; + + cdce706: clock-synth@69 { + compatible = "ti,cdce706"; + #clock-cells = <1>; + reg = <0x69>; + clocks = <&clk54>; + clock-names = "clk_in0"; + }; + }; + + spi0: spi-master@0d0a0000 { + compatible = "cdns,xtfpga-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0d0a0000 0xc>; + + tlv320aic23: sound-codec@0 { + #sound-dai-cells = <0>; + compatible = "tlv320aic23"; + reg = <0>; + spi-max-frequency = <12500000>; + }; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic23>; + simple-audio-card,bitclock-master = <0>; + simple-audio-card,frame-master = <0>; + clocks = <&cdce706 4>; + }; }; }; diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig new file mode 100644 index 000000000000..c4904db15582 --- /dev/null +++ b/arch/xtensa/configs/audio_kc705_defconfig @@ -0,0 +1,142 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_IRQ_DOMAIN_DEBUG=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_MEMCG=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_XTENSA_VARIANT_CUSTOM=y +CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_kc705_hifi" +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_PREEMPT=y +CONFIG_HIGHMEM=y +# CONFIG_PCI is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug" +CONFIG_USE_OF=y +CONFIG_BUILTIN_DTB="kc705" +# CONFIG_COMPACTION is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_MTD=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_UBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_OCORES=y +CONFIG_SPI=y +CONFIG_SPI_XTENSA_XTFPGA=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_SOFT_WATCHDOG=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_XTFPGA_I2S=y +CONFIG_SND_SOC_TLV320AIC23_SPI=y +CONFIG_SND_SIMPLE_CARD=y +# CONFIG_USB_SUPPORT is not set +CONFIG_COMMON_CLK_CDCE706=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_FANOTIFY=y +CONFIG_VFAT_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_UBIFS_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V4=y +CONFIG_NFS_SWAP=y +CONFIG_ROOT_NFS=y +CONFIG_SUNRPC_DEBUG=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_DEBUG_INFO=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_ATOMIC_SLEEP=y +CONFIG_STACKTRACE=y +CONFIG_RCU_TRACE=y +# CONFIG_FTRACE is not set +# CONFIG_S32C1I_SELFTEST is not set +CONFIG_CRYPTO_ANSI_CPRNG=y diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index db5bb72e2f4e..b95c30594355 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -715,7 +715,7 @@ __SYSCALL(323, sys_process_vm_writev, 6) __SYSCALL(324, sys_name_to_handle_at, 5) #define __NR_open_by_handle_at 325 __SYSCALL(325, sys_open_by_handle_at, 3) -#define __NR_sync_file_range 326 +#define __NR_sync_file_range2 326 __SYSCALL(326, sys_sync_file_range2, 6) #define __NR_perf_event_open 327 __SYSCALL(327, sys_perf_event_open, 5) @@ -749,8 +749,12 @@ __SYSCALL(337, sys_seccomp, 3) __SYSCALL(338, sys_getrandom, 3) #define __NR_memfd_create 339 __SYSCALL(339, sys_memfd_create, 2) +#define __NR_bpf 340 +__SYSCALL(340, sys_bpf, 3) +#define __NR_execveat 341 +__SYSCALL(341, sys_execveat, 5) -#define __NR_syscall_count 340 +#define __NR_syscall_count 342 /* * sysxtensa syscall handler diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 18d962a8c0c2..d3a0f0fd56dd 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -29,6 +29,7 @@ AFLAGS_head.o += -mtext-section-literals sed-y = -e 's/\*(\(\.[a-z]*it\|\.ref\|\)\.text)/*(\1.literal \1.text)/g' \ -e 's/\.text\.unlikely/.literal.unlikely .text.unlikely/g' \ + -e 's/\*(\(\.text .*\))/*(.literal \1)/g' \ -e 's/\*(\(\.text\.[a-z]*\))/*(\1.literal \1)/g' quiet_cmd__cpp_lds_S = LDS $@ diff --git a/arch/xtensa/platforms/xtfpga/Makefile b/arch/xtensa/platforms/xtfpga/Makefile index b9ae206340cd..7839d38b2337 100644 --- a/arch/xtensa/platforms/xtfpga/Makefile +++ b/arch/xtensa/platforms/xtfpga/Makefile @@ -6,4 +6,5 @@ # # Note 2! The CFLAGS definitions are in the main makefile... -obj-y = setup.o lcd.o +obj-y += setup.o +obj-$(CONFIG_XTFPGA_LCD) += lcd.o diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h index 4dc670850213..0a55bb9c5420 100644 --- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h +++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h @@ -40,9 +40,6 @@ /* UART */ #define DUART16552_PADDR (XCHAL_KIO_PADDR + 0x0D050020) -/* LCD instruction and data addresses. */ -#define LCD_INSTR_ADDR ((char *)IOADDR(0x0D040000)) -#define LCD_DATA_ADDR ((char *)IOADDR(0x0D040004)) /* Misc. */ #define XTFPGA_FPGAREGS_VADDR IOADDR(0x0D020000) diff --git a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h index 0e435645af5a..4c8541ed1139 100644 --- a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h +++ b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h @@ -11,10 +11,25 @@ #ifndef __XTENSA_XTAVNET_LCD_H #define __XTENSA_XTAVNET_LCD_H +#ifdef CONFIG_XTFPGA_LCD /* Display string STR at position POS on the LCD. */ void lcd_disp_at_pos(char *str, unsigned char pos); /* Shift the contents of the LCD display left or right. */ void lcd_shiftleft(void); void lcd_shiftright(void); +#else +static inline void lcd_disp_at_pos(char *str, unsigned char pos) +{ +} + +static inline void lcd_shiftleft(void) +{ +} + +static inline void lcd_shiftright(void) +{ +} +#endif + #endif diff --git a/arch/xtensa/platforms/xtfpga/lcd.c b/arch/xtensa/platforms/xtfpga/lcd.c index 2872301598df..4dc0c1b43f4b 100644 --- a/arch/xtensa/platforms/xtfpga/lcd.c +++ b/arch/xtensa/platforms/xtfpga/lcd.c @@ -1,50 +1,63 @@ /* - * Driver for the LCD display on the Tensilica LX60 Board. + * Driver for the LCD display on the Tensilica XTFPGA board family. + * http://www.mytechcorp.com/cfdata/productFile/File1/MOC-16216B-B-A0A04.pdf * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2001, 2006 Tensilica Inc. + * Copyright (C) 2015 Cadence Design Systems Inc. */ -/* - * - * FIXME: this code is from the examples from the LX60 user guide. - * - * The lcd_pause function does busy waiting, which is probably not - * great. Maybe the code could be changed to use kernel timers, or - * change the hardware to not need to wait. - */ - +#include <linux/delay.h> #include <linux/init.h> #include <linux/io.h> #include <platform/hardware.h> #include <platform/lcd.h> -#include <linux/delay.h> -#define LCD_PAUSE_ITERATIONS 4000 +/* LCD instruction and data addresses. */ +#define LCD_INSTR_ADDR ((char *)IOADDR(CONFIG_XTFPGA_LCD_BASE_ADDR)) +#define LCD_DATA_ADDR (LCD_INSTR_ADDR + 4) + #define LCD_CLEAR 0x1 #define LCD_DISPLAY_ON 0xc /* 8bit and 2 lines display */ #define LCD_DISPLAY_MODE8BIT 0x38 +#define LCD_DISPLAY_MODE4BIT 0x28 #define LCD_DISPLAY_POS 0x80 #define LCD_SHIFT_LEFT 0x18 #define LCD_SHIFT_RIGHT 0x1c +static void lcd_put_byte(u8 *addr, u8 data) +{ +#ifdef CONFIG_XTFPGA_LCD_8BIT_ACCESS + ACCESS_ONCE(*addr) = data; +#else + ACCESS_ONCE(*addr) = data & 0xf0; + ACCESS_ONCE(*addr) = (data << 4) & 0xf0; +#endif +} + static int __init lcd_init(void) { - *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT; + ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT; mdelay(5); - *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT; + ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT; udelay(200); - *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT; + ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT; + udelay(50); +#ifndef CONFIG_XTFPGA_LCD_8BIT_ACCESS + ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE4BIT; + udelay(50); + lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT); udelay(50); - *LCD_INSTR_ADDR = LCD_DISPLAY_ON; +#endif + lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_ON); udelay(50); - *LCD_INSTR_ADDR = LCD_CLEAR; + lcd_put_byte(LCD_INSTR_ADDR, LCD_CLEAR); mdelay(10); lcd_disp_at_pos("XTENSA LINUX", 0); return 0; @@ -52,10 +65,10 @@ static int __init lcd_init(void) void lcd_disp_at_pos(char *str, unsigned char pos) { - *LCD_INSTR_ADDR = LCD_DISPLAY_POS | pos; + lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_POS | pos); udelay(100); while (*str != 0) { - *LCD_DATA_ADDR = *str; + lcd_put_byte(LCD_DATA_ADDR, *str); udelay(200); str++; } @@ -63,13 +76,13 @@ void lcd_disp_at_pos(char *str, unsigned char pos) void lcd_shiftleft(void) { - *LCD_INSTR_ADDR = LCD_SHIFT_LEFT; + lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_LEFT); udelay(50); } void lcd_shiftright(void) { - *LCD_INSTR_ADDR = LCD_SHIFT_RIGHT; + lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_RIGHT); udelay(50); } |