diff options
Diffstat (limited to 'arch/x86_64/kernel/pci-dma.c')
-rw-r--r-- | arch/x86_64/kernel/pci-dma.c | 286 |
1 files changed, 246 insertions, 40 deletions
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index cab471cf3edb..2f5d8328e2b9 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -8,53 +8,259 @@ #include <linux/pci.h> #include <linux/module.h> #include <asm/io.h> +#include <asm/proto.h> -/* Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scatter-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. +int iommu_merge __read_mostly = 0; +EXPORT_SYMBOL(iommu_merge); + +dma_addr_t bad_dma_address __read_mostly; +EXPORT_SYMBOL(bad_dma_address); + +/* This tells the BIO block layer to assume merging. Default to off + because we cannot guarantee merging later. */ +int iommu_bio_merge __read_mostly = 0; +EXPORT_SYMBOL(iommu_bio_merge); + +int iommu_sac_force __read_mostly = 0; +EXPORT_SYMBOL(iommu_sac_force); + +int no_iommu __read_mostly; +#ifdef CONFIG_IOMMU_DEBUG +int panic_on_overflow __read_mostly = 1; +int force_iommu __read_mostly = 1; +#else +int panic_on_overflow __read_mostly = 0; +int force_iommu __read_mostly= 0; +#endif + +/* Dummy device used for NULL arguments (normally ISA). Better would + be probably a smaller DMA mask, but this is bug-to-bug compatible + to i386. */ +struct device fallback_dev = { + .bus_id = "fallback device", + .coherent_dma_mask = 0xffffffff, + .dma_mask = &fallback_dev.coherent_dma_mask, +}; + +/* Allocate DMA memory on node near device */ +noinline static void * +dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order) +{ + struct page *page; + int node; + if (dev->bus == &pci_bus_type) + node = pcibus_to_node(to_pci_dev(dev)->bus); + else + node = numa_node_id(); + page = alloc_pages_node(node, gfp, order); + return page ? page_address(page) : NULL; +} + +/* + * Allocate memory for a coherent mapping. */ -int dma_map_sg(struct device *hwdev, struct scatterlist *sg, - int nents, int direction) +void * +dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t gfp) { - int i; - - BUG_ON(direction == DMA_NONE); - for (i = 0; i < nents; i++ ) { - struct scatterlist *s = &sg[i]; - BUG_ON(!s->page); - s->dma_address = virt_to_bus(page_address(s->page) +s->offset); - s->dma_length = s->length; + void *memory; + unsigned long dma_mask = 0; + u64 bus; + + if (!dev) + dev = &fallback_dev; + dma_mask = dev->coherent_dma_mask; + if (dma_mask == 0) + dma_mask = 0xffffffff; + + /* Kludge to make it bug-to-bug compatible with i386. i386 + uses the normal dma_mask for alloc_coherent. */ + dma_mask &= *dev->dma_mask; + + /* Why <=? Even when the mask is smaller than 4GB it is often + larger than 16MB and in this case we have a chance of + finding fitting memory in the next higher zone first. If + not retry with true GFP_DMA. -AK */ + if (dma_mask <= 0xffffffff) + gfp |= GFP_DMA32; + + again: + memory = dma_alloc_pages(dev, gfp, get_order(size)); + if (memory == NULL) + return NULL; + + { + int high, mmu; + bus = virt_to_bus(memory); + high = (bus + size) >= dma_mask; + mmu = high; + if (force_iommu && !(gfp & GFP_DMA)) + mmu = 1; + else if (high) { + free_pages((unsigned long)memory, + get_order(size)); + + /* Don't use the 16MB ZONE_DMA unless absolutely + needed. It's better to use remapping first. */ + if (dma_mask < 0xffffffff && !(gfp & GFP_DMA)) { + gfp = (gfp & ~GFP_DMA32) | GFP_DMA; + goto again; + } + + if (dma_ops->alloc_coherent) + return dma_ops->alloc_coherent(dev, size, + dma_handle, gfp); + return NULL; + } + + memset(memory, 0, size); + if (!mmu) { + *dma_handle = virt_to_bus(memory); + return memory; + } + } + + if (dma_ops->alloc_coherent) { + free_pages((unsigned long)memory, get_order(size)); + gfp &= ~(GFP_DMA|GFP_DMA32); + return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); + } + + if (dma_ops->map_simple) { + *dma_handle = dma_ops->map_simple(dev, memory, + size, + PCI_DMA_BIDIRECTIONAL); + if (*dma_handle != bad_dma_address) + return memory; } - return nents; -} -EXPORT_SYMBOL(dma_map_sg); + if (panic_on_overflow) + panic("dma_alloc_coherent: IOMMU overflow by %lu bytes\n",size); + free_pages((unsigned long)memory, get_order(size)); + return NULL; +} +EXPORT_SYMBOL(dma_alloc_coherent); -/* Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. +/* + * Unmap coherent memory. + * The caller must ensure that the device has finished accessing the mapping. */ -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, int dir) +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t bus) +{ + if (dma_ops->unmap_single) + dma_ops->unmap_single(dev, bus, size, 0); + free_pages((unsigned long)vaddr, get_order(size)); +} +EXPORT_SYMBOL(dma_free_coherent); + +int dma_supported(struct device *dev, u64 mask) +{ + if (dma_ops->dma_supported) + return dma_ops->dma_supported(dev, mask); + + /* Copied from i386. Doesn't make much sense, because it will + only work for pci_alloc_coherent. + The caller just has to use GFP_DMA in this case. */ + if (mask < 0x00ffffff) + return 0; + + /* Tell the device to use SAC when IOMMU force is on. This + allows the driver to use cheaper accesses in some cases. + + Problem with this is that if we overflow the IOMMU area and + return DAC as fallback address the device may not handle it + correctly. + + As a special case some controllers have a 39bit address + mode that is as efficient as 32bit (aic79xx). Don't force + SAC for these. Assume all masks <= 40 bits are of this + type. Normally this doesn't make any difference, but gives + more gentle handling of IOMMU overflow. */ + if (iommu_sac_force && (mask >= 0xffffffffffULL)) { + printk(KERN_INFO "%s: Force SAC with mask %Lx\n", dev->bus_id,mask); + return 0; + } + + return 1; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 mask) { - int i; - for (i = 0; i < nents; i++) { - struct scatterlist *s = &sg[i]; - BUG_ON(s->page == NULL); - BUG_ON(s->dma_address == 0); - dma_unmap_single(dev, s->dma_address, s->dma_length, dir); - } + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + *dev->dma_mask = mask; + return 0; } +EXPORT_SYMBOL(dma_set_mask); + +/* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge] + [,forcesac][,fullflush][,nomerge][,biomerge] + size set size of iommu (in bytes) + noagp don't initialize the AGP driver and use full aperture. + off don't use the IOMMU + leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on) + memaper[=order] allocate an own aperture over RAM with size 32MB^order. + noforce don't force IOMMU usage. Default. + force Force IOMMU. + merge Do lazy merging. This may improve performance on some block devices. + Implies force (experimental) + biomerge Do merging at the BIO layer. This is more efficient than merge, + but should be only done with very big IOMMUs. Implies merge,force. + nomerge Don't do SG merging. + forcesac For SAC mode for masks <40bits (experimental) + fullflush Flush IOMMU on each allocation (default) + nofullflush Don't use IOMMU fullflush + allowed overwrite iommu off workarounds for specific chipsets. + soft Use software bounce buffering (default for Intel machines) + noaperture Don't touch the aperture for AGP. +*/ +__init int iommu_setup(char *p) +{ + iommu_merge = 1; -EXPORT_SYMBOL(dma_unmap_sg); + while (*p) { + if (!strncmp(p,"off",3)) + no_iommu = 1; + /* gart_parse_options has more force support */ + if (!strncmp(p,"force",5)) + force_iommu = 1; + if (!strncmp(p,"noforce",7)) { + iommu_merge = 0; + force_iommu = 0; + } + + if (!strncmp(p, "biomerge",8)) { + iommu_bio_merge = 4096; + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "panic",5)) + panic_on_overflow = 1; + if (!strncmp(p, "nopanic",7)) + panic_on_overflow = 0; + if (!strncmp(p, "merge",5)) { + iommu_merge = 1; + force_iommu = 1; + } + if (!strncmp(p, "nomerge",7)) + iommu_merge = 0; + if (!strncmp(p, "forcesac",8)) + iommu_sac_force = 1; + +#ifdef CONFIG_SWIOTLB + if (!strncmp(p, "soft",4)) + swiotlb = 1; +#endif + +#ifdef CONFIG_GART_IOMMU + gart_parse_options(p); +#endif + + p += strcspn(p, ","); + if (*p == ',') + ++p; + } + return 1; +} |