diff options
Diffstat (limited to 'arch/x86/xen/enlighten.c')
| -rw-r--r-- | arch/x86/xen/enlighten.c | 138 |
1 files changed, 118 insertions, 20 deletions
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index fa6ade76ef3f..201d09a7c46b 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -262,8 +262,9 @@ static void __init xen_banner(void) struct xen_extraversion extra; HYPERVISOR_xen_version(XENVER_extraversion, &extra); - printk(KERN_INFO "Booting paravirtualized kernel on %s\n", - pv_info.name); + pr_info("Booting paravirtualized kernel %son %s\n", + xen_feature(XENFEAT_auto_translated_physmap) ? + "with PVH extensions " : "", pv_info.name); printk(KERN_INFO "Xen version: %d.%d%s%s\n", version >> 16, version & 0xffff, extra.extraversion, xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); @@ -433,7 +434,7 @@ static void __init xen_init_cpuid_mask(void) ax = 1; cx = 0; - xen_cpuid(&ax, &bx, &cx, &dx); + cpuid(1, &ax, &bx, &cx, &dx); xsave_mask = (1 << (X86_FEATURE_XSAVE % 32)) | @@ -1142,8 +1143,9 @@ void xen_setup_vcpu_info_placement(void) xen_vcpu_setup(cpu); /* xen_vcpu_setup managed to place the vcpu_info within the - percpu area for all cpus, so make use of it */ - if (have_vcpu_info_placement) { + * percpu area for all cpus, so make use of it. Note that for + * PVH we want to use native IRQ mechanism. */ + if (have_vcpu_info_placement && !xen_pvh_domain()) { pv_irq_ops.save_fl = __PV_IS_CALLEE_SAVE(xen_save_fl_direct); pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(xen_restore_fl_direct); pv_irq_ops.irq_disable = __PV_IS_CALLEE_SAVE(xen_irq_disable_direct); @@ -1407,9 +1409,49 @@ static void __init xen_boot_params_init_edd(void) * Set up the GDT and segment registers for -fstack-protector. Until * we do this, we have to be careful not to call any stack-protected * function, which is most of the kernel. + * + * Note, that it is __ref because the only caller of this after init + * is PVH which is not going to use xen_load_gdt_boot or other + * __init functions. */ -static void __init xen_setup_stackprotector(void) +static void __ref xen_setup_gdt(int cpu) { + if (xen_feature(XENFEAT_auto_translated_physmap)) { +#ifdef CONFIG_X86_64 + unsigned long dummy; + + load_percpu_segment(cpu); /* We need to access per-cpu area */ + switch_to_new_gdt(cpu); /* GDT and GS set */ + + /* We are switching of the Xen provided GDT to our HVM mode + * GDT. The new GDT has __KERNEL_CS with CS.L = 1 + * and we are jumping to reload it. + */ + asm volatile ("pushq %0\n" + "leaq 1f(%%rip),%0\n" + "pushq %0\n" + "lretq\n" + "1:\n" + : "=&r" (dummy) : "0" (__KERNEL_CS)); + + /* + * While not needed, we also set the %es, %ds, and %fs + * to zero. We don't care about %ss as it is NULL. + * Strictly speaking this is not needed as Xen zeros those + * out (and also MSR_FS_BASE, MSR_GS_BASE, MSR_KERNEL_GS_BASE) + * + * Linux zeros them in cpu_init() and in secondary_startup_64 + * (for BSP). + */ + loadsegment(es, 0); + loadsegment(ds, 0); + loadsegment(fs, 0); +#else + /* PVH: TODO Implement. */ + BUG(); +#endif + return; /* PVH does not need any PV GDT ops. */ + } pv_cpu_ops.write_gdt_entry = xen_write_gdt_entry_boot; pv_cpu_ops.load_gdt = xen_load_gdt_boot; @@ -1420,6 +1462,58 @@ static void __init xen_setup_stackprotector(void) pv_cpu_ops.load_gdt = xen_load_gdt; } +/* + * A PV guest starts with default flags that are not set for PVH, set them + * here asap. + */ +static void xen_pvh_set_cr_flags(int cpu) +{ + + /* Some of these are setup in 'secondary_startup_64'. The others: + * X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests + * (which PVH shared codepaths), while X86_CR0_PG is for PVH. */ + write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM); + + if (!cpu) + return; + /* + * For BSP, PSE PGE are set in probe_page_size_mask(), for APs + * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu_init. + */ + if (cpu_has_pse) + set_in_cr4(X86_CR4_PSE); + + if (cpu_has_pge) + set_in_cr4(X86_CR4_PGE); +} + +/* + * Note, that it is ref - because the only caller of this after init + * is PVH which is not going to use xen_load_gdt_boot or other + * __init functions. + */ +void __ref xen_pvh_secondary_vcpu_init(int cpu) +{ + xen_setup_gdt(cpu); + xen_pvh_set_cr_flags(cpu); +} + +static void __init xen_pvh_early_guest_init(void) +{ + if (!xen_feature(XENFEAT_auto_translated_physmap)) + return; + + if (!xen_feature(XENFEAT_hvm_callback_vector)) + return; + + xen_have_vector_callback = 1; + xen_pvh_set_cr_flags(0); + +#ifdef CONFIG_X86_32 + BUG(); /* PVH: Implement proper support. */ +#endif +} + /* First C function to be called on Xen boot */ asmlinkage void __init xen_start_kernel(void) { @@ -1431,13 +1525,16 @@ asmlinkage void __init xen_start_kernel(void) xen_domain_type = XEN_PV_DOMAIN; + xen_setup_features(); + xen_pvh_early_guest_init(); xen_setup_machphys_mapping(); /* Install Xen paravirt ops */ pv_info = xen_info; pv_init_ops = xen_init_ops; - pv_cpu_ops = xen_cpu_ops; pv_apic_ops = xen_apic_ops; + if (!xen_pvh_domain()) + pv_cpu_ops = xen_cpu_ops; x86_init.resources.memory_setup = xen_memory_setup; x86_init.oem.arch_setup = xen_arch_setup; @@ -1469,17 +1566,14 @@ asmlinkage void __init xen_start_kernel(void) /* Work out if we support NX */ x86_configure_nx(); - xen_setup_features(); - /* Get mfn list */ - if (!xen_feature(XENFEAT_auto_translated_physmap)) - xen_build_dynamic_phys_to_machine(); + xen_build_dynamic_phys_to_machine(); /* * Set up kernel GDT and segment registers, mainly so that * -fstack-protector code can be executed. */ - xen_setup_stackprotector(); + xen_setup_gdt(0); xen_init_irq_ops(); xen_init_cpuid_mask(); @@ -1548,14 +1642,18 @@ asmlinkage void __init xen_start_kernel(void) /* set the limit of our address space */ xen_reserve_top(); - /* We used to do this in xen_arch_setup, but that is too late on AMD - * were early_cpu_init (run before ->arch_setup()) calls early_amd_init - * which pokes 0xcf8 port. - */ - set_iopl.iopl = 1; - rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); - if (rc != 0) - xen_raw_printk("physdev_op failed %d\n", rc); + /* PVH: runs at default kernel iopl of 0 */ + if (!xen_pvh_domain()) { + /* + * We used to do this in xen_arch_setup, but that is too late + * on AMD were early_cpu_init (run before ->arch_setup()) calls + * early_amd_init which pokes 0xcf8 port. + */ + set_iopl.iopl = 1; + rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl); + if (rc != 0) + xen_raw_printk("physdev_op failed %d\n", rc); + } #ifdef CONFIG_X86_32 /* set up basic CPUID stuff */ |