diff options
Diffstat (limited to 'arch/x86/pci/mrst.c')
| -rw-r--r-- | arch/x86/pci/mrst.c | 41 |
1 files changed, 24 insertions, 17 deletions
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c index 6eb18c42a28a..903fded50786 100644 --- a/arch/x86/pci/mrst.c +++ b/arch/x86/pci/mrst.c @@ -23,11 +23,11 @@ #include <linux/ioport.h> #include <linux/init.h> #include <linux/dmi.h> +#include <linux/acpi.h> +#include <linux/io.h> +#include <linux/smp.h> -#include <asm/acpi.h> #include <asm/segment.h> -#include <asm/io.h> -#include <asm/smp.h> #include <asm/pci_x86.h> #include <asm/hw_irq.h> #include <asm/io_apic.h> @@ -43,7 +43,7 @@ #define PCI_FIXED_BAR_4_SIZE 0x14 #define PCI_FIXED_BAR_5_SIZE 0x1c -static int pci_soc_mode = 0; +static int pci_soc_mode; /** * fixed_bar_cap - return the offset of the fixed BAR cap if found @@ -141,7 +141,8 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn, */ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) { - /* This is a workaround for A0 LNC bug where PCI status register does + /* + * This is a workaround for A0 LNC bug where PCI status register does * not have new CAP bit set. can not be written by SW either. * * PCI header type in real LNC indicates a single function device, this @@ -154,7 +155,7 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg) || devfn == PCI_DEVFN(0, 0) || devfn == PCI_DEVFN(3, 0))) return 1; - return 0; /* langwell on others */ + return 0; /* Langwell on others */ } static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, @@ -172,7 +173,8 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, { int offset; - /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read + /* + * On MRST, there is no PCI ROM BAR, this will cause a subsequent read * to ROM BAR return 0 then being ignored. */ if (where == PCI_ROM_ADDRESS) @@ -210,7 +212,8 @@ static int mrst_pci_irq_enable(struct pci_dev *dev) pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to + /* + * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to * IOAPIC RTE entries, so we just enable RTE for the device. */ irq_attr.ioapic = mp_find_ioapic(dev->irq); @@ -235,7 +238,7 @@ struct pci_ops pci_mrst_ops = { */ int __init pci_mrst_init(void) { - printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n"); + pr_info("Intel MID platform detected, using MID PCI ops\n"); pci_mmcfg_late_init(); pcibios_enable_irq = mrst_pci_irq_enable; pci_root_ops = pci_mrst_ops; @@ -244,17 +247,21 @@ int __init pci_mrst_init(void) return 1; } -/* Langwell devices are not true pci devices, they are not subject to 10 ms - * d3 to d0 delay required by pci spec. +/* + * Langwell devices are not true PCI devices; they are not subject to 10 ms + * d3 to d0 delay required by PCI spec. */ static void pci_d3delay_fixup(struct pci_dev *dev) { - /* PCI fixups are effectively decided compile time. If we have a dual - SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */ - if (!pci_soc_mode) - return; - /* true pci devices in lincroft should allow type 1 access, the rest - * are langwell fake pci devices. + /* + * PCI fixups are effectively decided compile time. If we have a dual + * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices. + */ + if (!pci_soc_mode) + return; + /* + * True PCI devices in Lincroft should allow type 1 access, the rest + * are Langwell fake PCI devices. */ if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID)) return; |