summaryrefslogtreecommitdiffstats
path: root/arch/x86/pci/mrst.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/pci/mrst.c')
-rw-r--r--arch/x86/pci/mrst.c41
1 files changed, 24 insertions, 17 deletions
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 6eb18c42a28a..903fded50786 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -23,11 +23,11 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
-#include <asm/acpi.h>
#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/smp.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
@@ -43,7 +43,7 @@
#define PCI_FIXED_BAR_4_SIZE 0x14
#define PCI_FIXED_BAR_5_SIZE 0x1c
-static int pci_soc_mode = 0;
+static int pci_soc_mode;
/**
* fixed_bar_cap - return the offset of the fixed BAR cap if found
@@ -141,7 +141,8 @@ static int pci_device_update_fixed(struct pci_bus *bus, unsigned int devfn,
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
- /* This is a workaround for A0 LNC bug where PCI status register does
+ /*
+ * This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
* PCI header type in real LNC indicates a single function device, this
@@ -154,7 +155,7 @@ static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
|| devfn == PCI_DEVFN(0, 0)
|| devfn == PCI_DEVFN(3, 0)))
return 1;
- return 0; /* langwell on others */
+ return 0; /* Langwell on others */
}
static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
@@ -172,7 +173,8 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
{
int offset;
- /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+ /*
+ * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
* to ROM BAR return 0 then being ignored.
*/
if (where == PCI_ROM_ADDRESS)
@@ -210,7 +212,8 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+ /*
+ * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
irq_attr.ioapic = mp_find_ioapic(dev->irq);
@@ -235,7 +238,7 @@ struct pci_ops pci_mrst_ops = {
*/
int __init pci_mrst_init(void)
{
- printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n");
+ pr_info("Intel MID platform detected, using MID PCI ops\n");
pci_mmcfg_late_init();
pcibios_enable_irq = mrst_pci_irq_enable;
pci_root_ops = pci_mrst_ops;
@@ -244,17 +247,21 @@ int __init pci_mrst_init(void)
return 1;
}
-/* Langwell devices are not true pci devices, they are not subject to 10 ms
- * d3 to d0 delay required by pci spec.
+/*
+ * Langwell devices are not true PCI devices; they are not subject to 10 ms
+ * d3 to d0 delay required by PCI spec.
*/
static void pci_d3delay_fixup(struct pci_dev *dev)
{
- /* PCI fixups are effectively decided compile time. If we have a dual
- SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */
- if (!pci_soc_mode)
- return;
- /* true pci devices in lincroft should allow type 1 access, the rest
- * are langwell fake pci devices.
+ /*
+ * PCI fixups are effectively decided compile time. If we have a dual
+ * SoC/non-SoC kernel we don't want to mangle d3 on non-SoC devices.
+ */
+ if (!pci_soc_mode)
+ return;
+ /*
+ * True PCI devices in Lincroft should allow type 1 access, the rest
+ * are Langwell fake PCI devices.
*/
if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
return;