diff options
Diffstat (limited to 'arch/x86/mach-voyager/voyager_smp.c')
| -rw-r--r-- | arch/x86/mach-voyager/voyager_smp.c | 1805 |
1 files changed, 0 insertions, 1805 deletions
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c deleted file mode 100644 index 98e3c2bc7563..000000000000 --- a/arch/x86/mach-voyager/voyager_smp.c +++ /dev/null @@ -1,1805 +0,0 @@ -/* -*- mode: c; c-basic-offset: 8 -*- */ - -/* Copyright (C) 1999,2001 - * - * Author: J.E.J.Bottomley@HansenPartnership.com - * - * This file provides all the same external entries as smp.c but uses - * the voyager hal to provide the functionality - */ -#include <linux/cpu.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> -#include <linux/mc146818rtc.h> -#include <linux/cache.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/bootmem.h> -#include <linux/completion.h> -#include <asm/desc.h> -#include <asm/voyager.h> -#include <asm/vic.h> -#include <asm/mtrr.h> -#include <asm/pgalloc.h> -#include <asm/tlbflush.h> -#include <asm/arch_hooks.h> -#include <asm/trampoline.h> - -/* TLB state -- visible externally, indexed physically */ -DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = { &init_mm, 0 }; - -/* CPU IRQ affinity -- set to all ones initially */ -static unsigned long cpu_irq_affinity[NR_CPUS] __cacheline_aligned = - {[0 ... NR_CPUS-1] = ~0UL }; - -/* per CPU data structure (for /proc/cpuinfo et al), visible externally - * indexed physically */ -DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info); -EXPORT_PER_CPU_SYMBOL(cpu_info); - -/* physical ID of the CPU used to boot the system */ -unsigned char boot_cpu_id; - -/* The memory line addresses for the Quad CPIs */ -struct voyager_qic_cpi *voyager_quad_cpi_addr[NR_CPUS] __cacheline_aligned; - -/* The masks for the Extended VIC processors, filled in by cat_init */ -__u32 voyager_extended_vic_processors = 0; - -/* Masks for the extended Quad processors which cannot be VIC booted */ -__u32 voyager_allowed_boot_processors = 0; - -/* The mask for the Quad Processors (both extended and non-extended) */ -__u32 voyager_quad_processors = 0; - -/* Total count of live CPUs, used in process.c to display - * the CPU information and in irq.c for the per CPU irq - * activity count. Finally exported by i386_ksyms.c */ -static int voyager_extended_cpus = 1; - -/* Used for the invalidate map that's also checked in the spinlock */ -static volatile unsigned long smp_invalidate_needed; - -/* Bitmask of CPUs present in the system - exported by i386_syms.c, used - * by scheduler but indexed physically */ -cpumask_t phys_cpu_present_map = CPU_MASK_NONE; - -/* The internal functions */ -static void send_CPI(__u32 cpuset, __u8 cpi); -static void ack_CPI(__u8 cpi); -static int ack_QIC_CPI(__u8 cpi); -static void ack_special_QIC_CPI(__u8 cpi); -static void ack_VIC_CPI(__u8 cpi); -static void send_CPI_allbutself(__u8 cpi); -static void mask_vic_irq(unsigned int irq); -static void unmask_vic_irq(unsigned int irq); -static unsigned int startup_vic_irq(unsigned int irq); -static void enable_local_vic_irq(unsigned int irq); -static void disable_local_vic_irq(unsigned int irq); -static void before_handle_vic_irq(unsigned int irq); -static void after_handle_vic_irq(unsigned int irq); -static void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask); -static void ack_vic_irq(unsigned int irq); -static void vic_enable_cpi(void); -static void do_boot_cpu(__u8 cpuid); -static void do_quad_bootstrap(void); -static void initialize_secondary(void); - -int hard_smp_processor_id(void); -int safe_smp_processor_id(void); - -/* Inline functions */ -static inline void send_one_QIC_CPI(__u8 cpu, __u8 cpi) -{ - voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi = - (smp_processor_id() << 16) + cpi; -} - -static inline void send_QIC_CPI(__u32 cpuset, __u8 cpi) -{ - int cpu; - - for_each_online_cpu(cpu) { - if (cpuset & (1 << cpu)) { -#ifdef VOYAGER_DEBUG - if (!cpu_online(cpu)) - VDEBUG(("CPU%d sending cpi %d to CPU%d not in " - "cpu_online_map\n", - hard_smp_processor_id(), cpi, cpu)); -#endif - send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET); - } - } -} - -static inline void wrapper_smp_local_timer_interrupt(void) -{ - irq_enter(); - smp_local_timer_interrupt(); - irq_exit(); -} - -static inline void send_one_CPI(__u8 cpu, __u8 cpi) -{ - if (voyager_quad_processors & (1 << cpu)) - send_one_QIC_CPI(cpu, cpi - QIC_CPI_OFFSET); - else - send_CPI(1 << cpu, cpi); -} - -static inline void send_CPI_allbutself(__u8 cpi) -{ - __u8 cpu = smp_processor_id(); - __u32 mask = cpus_addr(cpu_online_map)[0] & ~(1 << cpu); - send_CPI(mask, cpi); -} - -static inline int is_cpu_quad(void) -{ - __u8 cpumask = inb(VIC_PROC_WHO_AM_I); - return ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER); -} - -static inline int is_cpu_extended(void) -{ - __u8 cpu = hard_smp_processor_id(); - - return (voyager_extended_vic_processors & (1 << cpu)); -} - -static inline int is_cpu_vic_boot(void) -{ - __u8 cpu = hard_smp_processor_id(); - - return (voyager_extended_vic_processors - & voyager_allowed_boot_processors & (1 << cpu)); -} - -static inline void ack_CPI(__u8 cpi) -{ - switch (cpi) { - case VIC_CPU_BOOT_CPI: - if (is_cpu_quad() && !is_cpu_vic_boot()) - ack_QIC_CPI(cpi); - else - ack_VIC_CPI(cpi); - break; - case VIC_SYS_INT: - case VIC_CMN_INT: - /* These are slightly strange. Even on the Quad card, - * They are vectored as VIC CPIs */ - if (is_cpu_quad()) - ack_special_QIC_CPI(cpi); - else - ack_VIC_CPI(cpi); - break; - default: - printk("VOYAGER ERROR: CPI%d is in common CPI code\n", cpi); - break; - } -} - -/* local variables */ - -/* The VIC IRQ descriptors -- these look almost identical to the - * 8259 IRQs except that masks and things must be kept per processor - */ -static struct irq_chip vic_chip = { - .name = "VIC", - .startup = startup_vic_irq, - .mask = mask_vic_irq, - .unmask = unmask_vic_irq, - .set_affinity = set_vic_irq_affinity, -}; - -/* used to count up as CPUs are brought on line (starts at 0) */ -static int cpucount = 0; - -/* The per cpu profile stuff - used in smp_local_timer_interrupt */ -static DEFINE_PER_CPU(int, prof_multiplier) = 1; -static DEFINE_PER_CPU(int, prof_old_multiplier) = 1; -static DEFINE_PER_CPU(int, prof_counter) = 1; - -/* the map used to check if a CPU has booted */ -static __u32 cpu_booted_map; - -/* the synchronize flag used to hold all secondary CPUs spinning in - * a tight loop until the boot sequence is ready for them */ -static cpumask_t smp_commenced_mask = CPU_MASK_NONE; - -/* This is for the new dynamic CPU boot code */ - -/* The per processor IRQ masks (these are usually kept in sync) */ -static __u16 vic_irq_mask[NR_CPUS] __cacheline_aligned; - -/* the list of IRQs to be enabled by the VIC_ENABLE_IRQ_CPI */ -static __u16 vic_irq_enable_mask[NR_CPUS] __cacheline_aligned = { 0 }; - -/* Lock for enable/disable of VIC interrupts */ -static __cacheline_aligned DEFINE_SPINLOCK(vic_irq_lock); - -/* The boot processor is correctly set up in PC mode when it - * comes up, but the secondaries need their master/slave 8259 - * pairs initializing correctly */ - -/* Interrupt counters (per cpu) and total - used to try to - * even up the interrupt handling routines */ -static long vic_intr_total = 0; -static long vic_intr_count[NR_CPUS] __cacheline_aligned = { 0 }; -static unsigned long vic_tick[NR_CPUS] __cacheline_aligned = { 0 }; - -/* Since we can only use CPI0, we fake all the other CPIs */ -static unsigned long vic_cpi_mailbox[NR_CPUS] __cacheline_aligned; - -/* debugging routine to read the isr of the cpu's pic */ -static inline __u16 vic_read_isr(void) -{ - __u16 isr; - - outb(0x0b, 0xa0); - isr = inb(0xa0) << 8; - outb(0x0b, 0x20); - isr |= inb(0x20); - - return isr; -} - -static __init void qic_setup(void) -{ - if (!is_cpu_quad()) { - /* not a quad, no setup */ - return; - } - outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0); - outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1); - - if (is_cpu_extended()) { - /* the QIC duplicate of the VIC base register */ - outb(VIC_DEFAULT_CPI_BASE, QIC_VIC_CPI_BASE_REGISTER); - outb(QIC_DEFAULT_CPI_BASE, QIC_CPI_BASE_REGISTER); - - /* FIXME: should set up the QIC timer and memory parity - * error vectors here */ - } -} - -static __init void vic_setup_pic(void) -{ - outb(1, VIC_REDIRECT_REGISTER_1); - /* clear the claim registers for dynamic routing */ - outb(0, VIC_CLAIM_REGISTER_0); - outb(0, VIC_CLAIM_REGISTER_1); - - outb(0, VIC_PRIORITY_REGISTER); - /* Set the Primary and Secondary Microchannel vector - * bases to be the same as the ordinary interrupts - * - * FIXME: This would be more efficient using separate - * vectors. */ - outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE); - outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE); - /* Now initiallise the master PIC belonging to this CPU by - * sending the four ICWs */ - - /* ICW1: level triggered, ICW4 needed */ - outb(0x19, 0x20); - - /* ICW2: vector base */ - outb(FIRST_EXTERNAL_VECTOR, 0x21); - - /* ICW3: slave at line 2 */ - outb(0x04, 0x21); - - /* ICW4: 8086 mode */ - outb(0x01, 0x21); - - /* now the same for the slave PIC */ - - /* ICW1: level trigger, ICW4 needed */ - outb(0x19, 0xA0); - - /* ICW2: slave vector base */ - outb(FIRST_EXTERNAL_VECTOR + 8, 0xA1); - - /* ICW3: slave ID */ - outb(0x02, 0xA1); - - /* ICW4: 8086 mode */ - outb(0x01, 0xA1); -} - -static void do_quad_bootstrap(void) -{ - if (is_cpu_quad() && is_cpu_vic_boot()) { - int i; - unsigned long flags; - __u8 cpuid = hard_smp_processor_id(); - - local_irq_save(flags); - - for (i = 0; i < 4; i++) { - /* FIXME: this would be >>3 &0x7 on the 32 way */ - if (((cpuid >> 2) & 0x03) == i) - /* don't lower our own mask! */ - continue; - - /* masquerade as local Quad CPU */ - outb(QIC_CPUID_ENABLE | i, QIC_PROCESSOR_ID); - /* enable the startup CPI */ - outb(QIC_BOOT_CPI_MASK, QIC_MASK_REGISTER1); - /* restore cpu id */ - outb(0, QIC_PROCESSOR_ID); - } - local_irq_restore(flags); - } -} - -void prefill_possible_map(void) -{ - /* This is empty on voyager because we need a much - * earlier detection which is done in find_smp_config */ -} - -/* Set up all the basic stuff: read the SMP config and make all the - * SMP information reflect only the boot cpu. All others will be - * brought on-line later. */ -void __init find_smp_config(void) -{ - int i; - - boot_cpu_id = hard_smp_processor_id(); - - printk("VOYAGER SMP: Boot cpu is %d\n", boot_cpu_id); - - /* initialize the CPU structures (moved from smp_boot_cpus) */ - for (i = 0; i < nr_cpu_ids; i++) - cpu_irq_affinity[i] = ~0; - cpu_online_map = cpumask_of_cpu(boot_cpu_id); - - /* The boot CPU must be extended */ - voyager_extended_vic_processors = 1 << boot_cpu_id; - /* initially, all of the first 8 CPUs can boot */ - voyager_allowed_boot_processors = 0xff; - /* set up everything for just this CPU, we can alter - * this as we start the other CPUs later */ - /* now get the CPU disposition from the extended CMOS */ - cpus_addr(phys_cpu_present_map)[0] = - voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK); - cpus_addr(phys_cpu_present_map)[0] |= - voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; - cpus_addr(phys_cpu_present_map)[0] |= - voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + - 2) << 16; - cpus_addr(phys_cpu_present_map)[0] |= - voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + - 3) << 24; - init_cpu_possible(&phys_cpu_present_map); - printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", - cpus_addr(phys_cpu_present_map)[0]); - /* Here we set up the VIC to enable SMP */ - /* enable the CPIs by writing the base vector to their register */ - outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER); - outb(1, VIC_REDIRECT_REGISTER_1); - /* set the claim registers for static routing --- Boot CPU gets - * all interrupts untill all other CPUs started */ - outb(0xff, VIC_CLAIM_REGISTER_0); - outb(0xff, VIC_CLAIM_REGISTER_1); - /* Set the Primary and Secondary Microchannel vector - * bases to be the same as the ordinary interrupts - * - * FIXME: This would be more efficient using separate - * vectors. */ - outb(FIRST_EXTERNAL_VECTOR, VIC_PRIMARY_MC_BASE); - outb(FIRST_EXTERNAL_VECTOR, VIC_SECONDARY_MC_BASE); - - /* Finally tell the firmware that we're driving */ - outb(inb(VOYAGER_SUS_IN_CONTROL_PORT) | VOYAGER_IN_CONTROL_FLAG, - VOYAGER_SUS_IN_CONTROL_PORT); - - current_thread_info()->cpu = boot_cpu_id; - percpu_write(cpu_number, boot_cpu_id); -} - -/* - * The bootstrap kernel entry code has set these up. Save them - * for a given CPU, id is physical */ -void __init smp_store_cpu_info(int id) -{ - struct cpuinfo_x86 *c = &cpu_data(id); - - *c = boot_cpu_data; - c->cpu_index = id; - - identify_secondary_cpu(c); -} - -/* Routine initially called when a non-boot CPU is brought online */ -static void __init start_secondary(void *unused) -{ - __u8 cpuid = hard_smp_processor_id(); - - cpu_init(); - - /* OK, we're in the routine */ - ack_CPI(VIC_CPU_BOOT_CPI); - - /* setup the 8259 master slave pair belonging to this CPU --- - * we won't actually receive any until the boot CPU - * relinquishes it's static routing mask */ - vic_setup_pic(); - - qic_setup(); - - if (is_cpu_quad() && !is_cpu_vic_boot()) { - /* clear the boot CPI */ - __u8 dummy; - - dummy = - voyager_quad_cpi_addr[cpuid]->qic_cpi[VIC_CPU_BOOT_CPI].cpi; - printk("read dummy %d\n", dummy); - } - - /* lower the mask to receive CPIs */ - vic_enable_cpi(); - - VDEBUG(("VOYAGER SMP: CPU%d, stack at about %p\n", cpuid, &cpuid)); - - notify_cpu_starting(cpuid); - - /* enable interrupts */ - local_irq_enable(); - - /* get our bogomips */ - calibrate_delay(); - - /* save our processor parameters */ - smp_store_cpu_info(cpuid); - - /* if we're a quad, we may need to bootstrap other CPUs */ - do_quad_bootstrap(); - - /* FIXME: this is rather a poor hack to prevent the CPU - * activating softirqs while it's supposed to be waiting for - * permission to proceed. Without this, the new per CPU stuff - * in the softirqs will fail */ - local_irq_disable(); - cpu_set(cpuid, cpu_callin_map); - - /* signal that we're done */ - cpu_booted_map = 1; - - while (!cpu_isset(cpuid, smp_commenced_mask)) - rep_nop(); - local_irq_enable(); - - local_flush_tlb(); - - cpu_set(cpuid, cpu_online_map); - wmb(); - cpu_idle(); -} - -/* Routine to kick start the given CPU and wait for it to report ready - * (or timeout in startup). When this routine returns, the requested - * CPU is either fully running and configured or known to be dead. - * - * We call this routine sequentially 1 CPU at a time, so no need for - * locking */ - -static void __init do_boot_cpu(__u8 cpu) -{ - struct task_struct *idle; - int timeout; - unsigned long flags; - int quad_boot = (1 << cpu) & voyager_quad_processors - & ~(voyager_extended_vic_processors - & voyager_allowed_boot_processors); - - /* This is the format of the CPI IDT gate (in real mode) which - * we're hijacking to boot the CPU */ - union IDTFormat { - struct seg { - __u16 Offset; - __u16 Segment; - } idt; - __u32 val; - } hijack_source; - - __u32 *hijack_vector; - __u32 start_phys_address = setup_trampoline(); - - /* There's a clever trick to this: The linux trampoline is - * compiled to begin at absolute location zero, so make the - * address zero but have the data segment selector compensate - * for the actual address */ - hijack_source.idt.Offset = start_phys_address & 0x000F; - hijack_source.idt.Segment = (start_phys_address >> 4) & 0xFFFF; - - cpucount++; - alternatives_smp_switch(1); - - idle = fork_idle(cpu); - if (IS_ERR(idle)) - panic("failed fork for CPU%d", cpu); - idle->thread.ip = (unsigned long)start_secondary; - /* init_tasks (in sched.c) is indexed logically */ - stack_start.sp = (void *)idle->thread.sp; - - per_cpu(current_task, cpu) = idle; - early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); - irq_ctx_init(cpu); - - /* Note: Don't modify initial ss override */ - VDEBUG(("VOYAGER SMP: Booting CPU%d at 0x%lx[%x:%x], stack %p\n", cpu, - (unsigned long)hijack_source.val, hijack_source.idt.Segment, - hijack_source.idt.Offset, stack_start.sp)); - - /* init lowmem identity mapping */ - clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY, - min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY)); - flush_tlb_all(); - - if (quad_boot) { - printk("CPU %d: non extended Quad boot\n", cpu); - hijack_vector = - (__u32 *) - phys_to_virt((VIC_CPU_BOOT_CPI + QIC_DEFAULT_CPI_BASE) * 4); - *hijack_vector = hijack_source.val; - } else { - printk("CPU%d: extended VIC boot\n", cpu); - hijack_vector = - (__u32 *) - phys_to_virt((VIC_CPU_BOOT_CPI + VIC_DEFAULT_CPI_BASE) * 4); - *hijack_vector = hijack_source.val; - /* VIC errata, may also receive interrupt at this address */ - hijack_vector = - (__u32 *) - phys_to_virt((VIC_CPU_BOOT_ERRATA_CPI + - VIC_DEFAULT_CPI_BASE) * 4); - *hijack_vector = hijack_source.val; - } - /* All non-boot CPUs start with interrupts fully masked. Need - * to lower the mask of the CPI we're about to send. We do - * this in the VIC by masquerading as the processor we're - * about to boot and lowering its interrupt mask */ - local_irq_save(flags); - if (quad_boot) { - send_one_QIC_CPI(cpu, VIC_CPU_BOOT_CPI); - } else { - outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID); - /* here we're altering registers belonging to `cpu' */ - - outb(VIC_BOOT_INTERRUPT_MASK, 0x21); - /* now go back to our original identity */ - outb(boot_cpu_id, VIC_PROCESSOR_ID); - - /* and boot the CPU */ - - send_CPI((1 << cpu), VIC_CPU_BOOT_CPI); - } - cpu_booted_map = 0; - local_irq_restore(flags); - - /* now wait for it to become ready (or timeout) */ - for (timeout = 0; timeout < 50000; timeout++) { - if (cpu_booted_map) - break; - udelay(100); - } - /* reset the page table */ - zap_low_mappings(); - - if (cpu_booted_map) { - VDEBUG(("CPU%d: Booted successfully, back in CPU %d\n", - cpu, smp_processor_id())); - - printk("CPU%d: ", cpu); - print_cpu_info(&cpu_data(cpu)); - wmb(); - cpu_set(cpu, cpu_callout_map); - cpu_set(cpu, cpu_present_map); - } else { - printk("CPU%d FAILED TO BOOT: ", cpu); - if (* - ((volatile unsigned char *)phys_to_virt(start_phys_address)) - == 0xA5) - printk("Stuck.\n"); - else - printk("Not responding.\n"); - - cpucount--; - } -} - -void __init smp_boot_cpus(void) -{ - int i; - - /* CAT BUS initialisation must be done after the memory */ - /* FIXME: The L4 has a catbus too, it just needs to be - * accessed in a totally different way */ - if (voyager_level == 5) { - voyager_cat_init(); - - /* now that the cat has probed the Voyager System Bus, sanity - * check the cpu map */ - if (((voyager_quad_processors | voyager_extended_vic_processors) - & cpus_addr(phys_cpu_present_map)[0]) != - cpus_addr(phys_cpu_present_map)[0]) { - /* should panic */ - printk("\n\n***WARNING*** " - "Sanity check of CPU present map FAILED\n"); - } - } else if (voyager_level == 4) - voyager_extended_vic_processors = - cpus_addr(phys_cpu_present_map)[0]; - - /* this sets up the idle task to run on the current cpu */ - voyager_extended_cpus = 1; - /* Remove the global_irq_holder setting, it triggers a BUG() on - * schedule at the moment */ - //global_irq_holder = boot_cpu_id; - - /* FIXME: Need to do something about this but currently only works - * on CPUs with a tsc which none of mine have. - smp_tune_scheduling(); - */ - smp_store_cpu_info(boot_cpu_id); - /* setup the jump vector */ - initial_code = (unsigned long)initialize_secondary; - printk("CPU%d: ", boot_cpu_id); - print_cpu_info(&cpu_data(boot_cpu_id)); - - if (is_cpu_quad()) { - /* booting on a Quad CPU */ - printk("VOYAGER SMP: Boot CPU is Quad\n"); - qic_setup(); - do_quad_bootstrap(); - } - - /* enable our own CPIs */ - vic_enable_cpi(); - - cpu_set(boot_cpu_id, cpu_online_map); - cpu_set(boot_cpu_id, cpu_callout_map); - - /* loop over all the extended VIC CPUs and boot them. The - * Quad CPUs must be bootstrapped by their extended VIC cpu */ - for (i = 0; i < nr_cpu_ids; i++) { - if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map)) - continue; - do_boot_cpu(i); - /* This udelay seems to be needed for the Quad boots - * don't remove unless you know what you're doing */ - udelay(1000); - } - /* we could compute the total bogomips here, but why bother?, - * Code added from smpboot.c */ - { - unsigned long bogosum = 0; - - for_each_online_cpu(i) - bogosum += cpu_data(i).loops_per_jiffy; - printk(KERN_INFO "Total of %d processors activated " - "(%lu.%02lu BogoMIPS).\n", - cpucount + 1, bogosum / (500000 / HZ), - (bogosum / (5000 / HZ)) % 100); - } - voyager_extended_cpus = hweight32(voyager_extended_vic_processors); - printk("VOYAGER: Extended (interrupt handling CPUs): " - "%d, non-extended: %d\n", voyager_extended_cpus, - num_booting_cpus() - voyager_extended_cpus); - /* that's it, switch to symmetric mode */ - outb(0, VIC_PRIORITY_REGISTER); - outb(0, VIC_CLAIM_REGISTER_0); - outb(0, VIC_CLAIM_REGISTER_1); - - VDEBUG(("VOYAGER SMP: Booted with %d CPUs\n", num_booting_cpus())); -} - -/* Reload the secondary CPUs task structure (this function does not - * return ) */ -static void __init initialize_secondary(void) -{ -#if 0 - // AC kernels only - set_current(hard_get_current()); -#endif - - /* - * We don't actually need to load the full TSS, - * basically just the stack pointer and the eip. - */ - - asm volatile ("movl %0,%%esp\n\t" - "jmp *%1"::"r" (current->thread.sp), - "r"(current->thread.ip)); -} - -/* handle a Voyager SYS_INT -- If we don't, the base board will - * panic the system. - * - * System interrupts occur because some problem was detected on the - * various busses. To find out what you have to probe all the - * hardware via the CAT bus. FIXME: At the moment we do nothing. */ -void smp_vic_sys_interrupt(struct pt_regs *regs) -{ - ack_CPI(VIC_SYS_INT); - printk("Voyager SYSTEM INTERRUPT\n"); -} - -/* Handle a voyager CMN_INT; These interrupts occur either because of - * a system status change or because a single bit memory error - * occurred. FIXME: At the moment, ignore all this. */ -void smp_vic_cmn_interrupt(struct pt_regs *regs) -{ - static __u8 in_cmn_int = 0; - static DEFINE_SPINLOCK(cmn_int_lock); - - /* common ints are broadcast, so make sure we only do this once */ - _raw_spin_lock(&cmn_int_lock); - if (in_cmn_int) - goto unlock_end; - - in_cmn_int++; - _raw_spin_unlock(&cmn_int_lock); - - VDEBUG(("Voyager COMMON INTERRUPT\n")); - - if (voyager_level == 5) - voyager_cat_do_common_interrupt(); - - _raw_spin_lock(&cmn_int_lock); - in_cmn_int = 0; - unlock_end: - _raw_spin_unlock(&cmn_int_lock); - ack_CPI(VIC_CMN_INT); -} - -/* - * Reschedule call back. Nothing to do, all the work is done - * automatically when we return from the interrupt. */ -static void smp_reschedule_interrupt(void) -{ - /* do nothing */ -} - -static struct mm_struct *flush_mm; -static unsigned long flush_va; -static DEFINE_SPINLOCK(tlbstate_lock); - -/* - * We cannot call mmdrop() because we are in interrupt context, - * instead update mm->cpu_vm_mask. - * - * We need to reload %cr3 since the page tables may be going - * away from under us.. - */ -static inline void voyager_leave_mm(unsigned long cpu) -{ - if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) - BUG(); - cpu_clear(cpu, per_cpu(cpu_tlbstate, cpu).active_mm->cpu_vm_mask); - load_cr3(swapper_pg_dir); -} - -/* - * Invalidate call-back - */ -static void smp_invalidate_interrupt(void) -{ - __u8 cpu = smp_processor_id(); - - if (!test_bit(cpu, &smp_invalidate_needed)) - return; - /* This will flood messages. Don't uncomment unless you see - * Problems with cross cpu invalidation - VDEBUG(("VOYAGER SMP: CPU%d received INVALIDATE_CPI\n", - smp_processor_id())); - */ - - if (flush_mm == per_cpu(cpu_tlbstate, cpu).active_mm) { - if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_OK) { - if (flush_va == TLB_FLUSH_ALL) - local_flush_tlb(); - else - __flush_tlb_one(flush_va); - } else - voyager_leave_mm(cpu); - } - smp_mb__before_clear_bit(); - clear_bit(cpu, &smp_invalidate_needed); - smp_mb__after_clear_bit(); -} - -/* All the new flush operations for 2.4 */ - -/* This routine is called with a physical cpu mask */ -static void -voyager_flush_tlb_others(unsigned long cpumask, struct mm_struct *mm, - unsigned long va) -{ - int stuck = 50000; - - if (!cpumask) - BUG(); - if ((cpumask & cpus_addr(cpu_online_map)[0]) != cpumask) - BUG(); - if (cpumask & (1 << smp_processor_id())) - BUG(); - if (!mm) - BUG(); - - spin_lock(&tlbstate_lock); - - flush_mm = mm; - flush_va = va; - atomic_set_mask(cpumask, &smp_invalidate_needed); - /* - * We have to send the CPI only to - * CPUs affected. - */ - send_CPI(cpumask, VIC_INVALIDATE_CPI); - - while (smp_invalidate_needed) { - mb(); - if (--stuck == 0) { - printk("***WARNING*** Stuck doing invalidate CPI " - "(CPU%d)\n", smp_processor_id()); - break; - } - } - - /* Uncomment only to debug invalidation problems - VDEBUG(("VOYAGER SMP: Completed invalidate CPI (CPU%d)\n", cpu)); - */ - - flush_mm = NULL; - flush_va = 0; - spin_unlock(&tlbstate_lock); -} - -void flush_tlb_current_task(void) -{ - struct mm_struct *mm = current->mm; - unsigned long cpu_mask; - - preempt_disable(); - - cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id()); - local_flush_tlb(); - if (cpu_mask) - voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - - preempt_enable(); -} - -void flush_tlb_mm(struct mm_struct *mm) -{ - unsigned long cpu_mask; - - preempt_disable(); - - cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id()); - - if (current->active_mm == mm) { - if (current->mm) - local_flush_tlb(); - else - voyager_leave_mm(smp_processor_id()); - } - if (cpu_mask) - voyager_flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - - preempt_enable(); -} - -void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) -{ - struct mm_struct *mm = vma->vm_mm; - unsigned long cpu_mask; - - preempt_disable(); - - cpu_mask = cpus_addr(mm->cpu_vm_mask)[0] & ~(1 << smp_processor_id()); - if (current->active_mm == mm) { - if (current->mm) - __flush_tlb_one(va); - else - voyager_leave_mm(smp_processor_id()); - } - - if (cpu_mask) - voyager_flush_tlb_others(cpu_mask, mm, va); - - preempt_enable(); -} - -EXPORT_SYMBOL(flush_tlb_page); - -/* enable the requested IRQs */ -static void smp_enable_irq_interrupt(void) -{ - __u8 irq; - __u8 cpu = get_cpu(); - - VDEBUG(("VOYAGER SMP: CPU%d enabling irq mask 0x%x\n", cpu, - vic_irq_enable_mask[cpu])); - - spin_lock(&vic_irq_lock); - for (irq = 0; irq < 16; irq++) { - if (vic_irq_enable_mask[cpu] & (1 << irq)) - enable_local_vic_irq(irq); - } - vic_irq_enable_mask[cpu] = 0; - spin_unlock(&vic_irq_lock); - - put_cpu_no_resched(); -} - -/* - * CPU halt call-back - */ -static void smp_stop_cpu_function(void *dummy) -{ - VDEBUG(("VOYAGER SMP: CPU%d is STOPPING\n", smp_processor_id())); - cpu_clear(smp_processor_id(), cpu_online_map); - local_irq_disable(); - for (;;) - halt(); -} - -/* execute a thread on a new CPU. The function to be called must be - * previously set up. This is used to schedule a function for - * execution on all CPUs - set up the function then broadcast a - * function_interrupt CPI to come here on each CPU */ -static void smp_call_function_interrupt(void) -{ - irq_enter(); - generic_smp_call_function_interrupt(); - __get_cpu_var(irq_stat).irq_call_count++; - irq_exit(); -} - -static void smp_call_function_single_interrupt(void) -{ - irq_enter(); - generic_smp_call_function_single_interrupt(); - __get_cpu_var(irq_stat).irq_call_count++; - irq_exit(); -} - -/* Sorry about the name. In an APIC based system, the APICs - * themselves are programmed to send a timer interrupt. This is used - * by linux to reschedule the processor. Voyager doesn't have this, - * so we use the system clock to interrupt one processor, which in - * turn, broadcasts a timer CPI to all the others --- we receive that - * CPI here. We don't use this actually for counting so losing - * ticks doesn't matter - * - * FIXME: For those CPUs which actually have a local APIC, we could - * try to use it to trigger this interrupt instead of having to - * broadcast the timer tick. Unfortunately, all my pentium DYADs have - * no local APIC, so I can't do this - * - * This function is currently a placeholder and is unused in the code */ -void smp_apic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - wrapper_smp_local_timer_interrupt(); - set_irq_regs(old_regs); -} - -/* All of the QUAD interrupt GATES */ -void smp_qic_timer_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - ack_QIC_CPI(QIC_TIMER_CPI); - wrapper_smp_local_timer_interrupt(); - set_irq_regs(old_regs); -} - -void smp_qic_invalidate_interrupt(struct pt_regs *regs) -{ - ack_QIC_CPI(QIC_INVALIDATE_CPI); - smp_invalidate_interrupt(); -} - -void smp_qic_reschedule_interrupt(struct pt_regs *regs) -{ - ack_QIC_CPI(QIC_RESCHEDULE_CPI); - smp_reschedule_interrupt(); -} - -void smp_qic_enable_irq_interrupt(struct pt_regs *regs) -{ - ack_QIC_CPI(QIC_ENABLE_IRQ_CPI); - smp_enable_irq_interrupt(); -} - -void smp_qic_call_function_interrupt(struct pt_regs *regs) -{ - ack_QIC_CPI(QIC_CALL_FUNCTION_CPI); - smp_call_function_interrupt(); -} - -void smp_qic_call_function_single_interrupt(struct pt_regs *regs) -{ - ack_QIC_CPI(QIC_CALL_FUNCTION_SINGLE_CPI); - smp_call_function_single_interrupt(); -} - -void smp_vic_cpi_interrupt(struct pt_regs *regs) -{ - struct pt_regs *old_regs = set_irq_regs(regs); - __u8 cpu = smp_processor_id(); - - if (is_cpu_quad()) - ack_QIC_CPI(VIC_CPI_LEVEL0); - else - ack_VIC_CPI(VIC_CPI_LEVEL0); - - if (test_and_clear_bit(VIC_TIMER_CPI, &vic_cpi_mailbox[cpu])) - wrapper_smp_local_timer_interrupt(); - if (test_and_clear_bit(VIC_INVALIDATE_CPI, &vic_cpi_mailbox[cpu])) - smp_invalidate_interrupt(); - if (test_and_clear_bit(VIC_RESCHEDULE_CPI, &vic_cpi_mailbox[cpu])) - smp_reschedule_interrupt(); - if (test_and_clear_bit(VIC_ENABLE_IRQ_CPI, &vic_cpi_mailbox[cpu])) - smp_enable_irq_interrupt(); - if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu])) - smp_call_function_interrupt(); - if (test_and_clear_bit(VIC_CALL_FUNCTION_SINGLE_CPI, &vic_cpi_mailbox[cpu])) - smp_call_function_single_interrupt(); - set_irq_regs(old_regs); -} - -static void do_flush_tlb_all(void *info) -{ - unsigned long cpu = smp_processor_id(); - - __flush_tlb_all(); - if (per_cpu(cpu_tlbstate, cpu).state == TLBSTATE_LAZY) - voyager_leave_mm(cpu); -} - -/* flush the TLB of every active CPU in the system */ -void flush_tlb_all(void) -{ - on_each_cpu(do_flush_tlb_all, 0, 1); -} - -/* send a reschedule CPI to one CPU by physical CPU number*/ -static void voyager_smp_send_reschedule(int cpu) -{ - send_one_CPI(cpu, VIC_RESCHEDULE_CPI); -} - -int hard_smp_processor_id(void) -{ - __u8 i; - __u8 cpumask = inb(VIC_PROC_WHO_AM_I); - if ((cpumask & QUAD_IDENTIFIER) == QUAD_IDENTIFIER) - return cpumask & 0x1F; - - for (i = 0; i < 8; i++) { - if (cpumask & (1 << i)) - return i; - } - printk("** WARNING ** Illegal cpuid returned by VIC: %d", cpumask); - return 0; -} - -int safe_smp_processor_id(void) -{ - return hard_smp_processor_id(); -} - -/* broadcast a halt to all other CPUs */ -static void voyager_smp_send_stop(void) -{ - smp_call_function(smp_stop_cpu_function, NULL, 1); -} - -/* this function is triggered in time.c when a clock tick fires - * we need to re-broadcast the tick to all CPUs */ -void smp_vic_timer_interrupt(void) -{ - send_CPI_allbutself(VIC_TIMER_CPI); - smp_local_timer_interrupt(); -} - -/* local (per CPU) timer interrupt. It does both profiling and - * process statistics/rescheduling. - * - * We do profiling in every local tick, statistics/rescheduling - * happen only every 'profiling multiplier' ticks. The default - * multiplier is 1 and it can be changed by writing the new multiplier - * value into /proc/profile. - */ -void smp_local_timer_interrupt(void) -{ - int cpu = smp_processor_id(); - long weight; - - profile_tick(CPU_PROFILING); - if (--per_cpu(prof_counter, cpu) <= 0) { - /* - * The multiplier may have changed since the last time we got - * to this point as a result of the user writing to - * /proc/profile. In this case we need to adjust the APIC - * timer accordingly. - * - * Interrupts are already masked off at this point. - */ - per_cpu(prof_counter, cpu) = per_cpu(prof_multiplier, cpu); - if (per_cpu(prof_counter, cpu) != - per_cpu(prof_old_multiplier, cpu)) { - /* FIXME: need to update the vic timer tick here */ - per_cpu(prof_old_multiplier, cpu) = - per_cpu(prof_counter, cpu); - } - - update_process_times(user_mode_vm(get_irq_regs())); - } - - if (((1 << cpu) & voyager_extended_vic_processors) == 0) - /* only extended VIC processors participate in - * interrupt distribution */ - return; - - /* - * We take the 'long' return path, and there every subsystem - * grabs the appropriate locks (kernel lock/ irq lock). - * - * we might want to decouple profiling from the 'long path', - * and do the profiling totally in assembly. - * - * Currently this isn't too much of an issue (performance wise), - * we can take more than 100K local irqs per second on a 100 MHz P5. - */ - - if ((++vic_tick[cpu] & 0x7) != 0) - return; - /* get here every 16 ticks (about every 1/6 of a second) */ - - /* Change our priority to give someone else a chance at getting - * the IRQ. The algorithm goes like this: - * - * In the VIC, the dynamically routed interrupt is always - * handled by the lowest priority eligible (i.e. receiving - * interrupts) CPU. If >1 eligible CPUs are equal lowest, the - * lowest processor number gets it. - * - * The priority of a CPU is controlled by a special per-CPU - * VIC priority register which is 3 bits wide 0 being lowest - * and 7 highest priority.. - * - * Therefore we subtract the average number of interrupts from - * the number we've fielded. If this number is negative, we - * lower the activity count and if it is positive, we raise - * it. - * - * I'm afraid this still leads to odd looking interrupt counts: - * the totals are all roughly equal, but the individual ones - * look rather skewed. - * - * FIXME: This algorithm is total crap when mixed with SMP - * affinity code since we now try to even up the interrupt - * counts when an affinity binding is keeping them on a - * particular CPU*/ - weight = (vic_intr_count[cpu] * voyager_extended_cpus - - vic_intr_total) >> 4; - weight += 4; - if (weight > 7) - weight = 7; - if (weight < 0) - weight = 0; - - outb((__u8) weight, VIC_PRIORITY_REGISTER); - -#ifdef VOYAGER_DEBUG - if ((vic_tick[cpu] & 0xFFF) == 0) { - /* print this message roughly every 25 secs */ - printk("VOYAGER SMP: vic_tick[%d] = %lu, weight = %ld\n", - cpu, vic_tick[cpu], weight); - } -#endif -} - -/* setup the profiling timer */ -int setup_profiling_timer(unsigned int multiplier) -{ - int i; - - if ((!multiplier)) - return -EINVAL; - - /* - * Set the new multiplier for each CPU. CPUs don't start using the - * new values until the next timer interrupt in which they do process - * accounting. - */ - for (i = 0; i < nr_cpu_ids; ++i) - per_cpu(prof_multiplier, i) = multiplier; - - return 0; -} - -/* This is a bit of a mess, but forced on us by the genirq changes - * there's no genirq handler that really does what voyager wants - * so hack it up with the simple IRQ handler */ -static void handle_vic_irq(unsigned int irq, struct irq_desc *desc) -{ - before_handle_vic_irq(irq); - handle_simple_irq(irq, desc); - after_handle_vic_irq(irq); -} - -/* The CPIs are handled in the per cpu 8259s, so they must be - * enabled to be received: FIX: enabling the CPIs in the early - * boot sequence interferes with bug checking; enable them later - * on in smp_init */ -#define VIC_SET_GATE(cpi, vector) \ - set_intr_gate((cpi) + VIC_DEFAULT_CPI_BASE, (vector)) -#define QIC_SET_GATE(cpi, vector) \ - set_intr_gate((cpi) + QIC_DEFAULT_CPI_BASE, (vector)) - -void __init voyager_smp_intr_init(void) -{ - int i; - - /* initialize the per cpu irq mask to all disabled */ - for (i = 0; i < nr_cpu_ids; i++) - vic_irq_mask[i] = 0xFFFF; - - VIC_SET_GATE(VIC_CPI_LEVEL0, vic_cpi_interrupt); - - VIC_SET_GATE(VIC_SYS_INT, vic_sys_interrupt); - VIC_SET_GATE(VIC_CMN_INT, vic_cmn_interrupt); - - QIC_SET_GATE(QIC_TIMER_CPI, qic_timer_interrupt); - QIC_SET_GATE(QIC_INVALIDATE_CPI, qic_invalidate_interrupt); - QIC_SET_GATE(QIC_RESCHEDULE_CPI, qic_reschedule_interrupt); - QIC_SET_GATE(QIC_ENABLE_IRQ_CPI, qic_enable_irq_interrupt); - QIC_SET_GATE(QIC_CALL_FUNCTION_CPI, qic_call_function_interrupt); - - /* now put the VIC descriptor into the first 48 IRQs - * - * This is for later: first 16 correspond to PC IRQs; next 16 - * are Primary MC IRQs and final 16 are Secondary MC IRQs */ - for (i = 0; i < 48; i++) - set_irq_chip_and_handler(i, &vic_chip, handle_vic_irq); -} - -/* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per - * processor to receive CPI */ -static void send_CPI(__u32 cpuset, __u8 cpi) -{ - int cpu; - __u32 quad_cpuset = (cpuset & voyager_quad_processors); - - if (cpi < VIC_START_FAKE_CPI) { - /* fake CPI are only used for booting, so send to the - * extended quads as well---Quads must be VIC booted */ - outb((__u8) (cpuset), VIC_CPI_Registers[cpi]); - return; - } - if (quad_cpuset) - send_QIC_CPI(quad_cpuset, cpi); - cpuset &= ~quad_cpuset; - cpuset &= 0xff; /* only first 8 CPUs vaild for VIC CPI */ - if (cpuset == 0) - return; - for_each_online_cpu(cpu) { - if (cpuset & (1 << cpu)) - set_bit(cpi, &vic_cpi_mailbox[cpu]); - } - if (cpuset) - outb((__u8) cpuset, VIC_CPI_Registers[VIC_CPI_LEVEL0]); -} - -/* Acknowledge receipt of CPI in the QIC, clear in QIC hardware and - * set the cache line to shared by reading it. - * - * DON'T make this inline otherwise the cache line read will be - * optimised away - * */ -static int ack_QIC_CPI(__u8 cpi) -{ - __u8 cpu = hard_smp_processor_id(); - - cpi &= 7; - - outb(1 << cpi, QIC_INTERRUPT_CLEAR1); - return voyager_quad_cpi_addr[cpu]->qic_cpi[cpi].cpi; -} - -static void ack_special_QIC_CPI(__u8 cpi) -{ - switch (cpi) { - case VIC_CMN_INT: - outb(QIC_CMN_INT, QIC_INTERRUPT_CLEAR0); - break; - case VIC_SYS_INT: - outb(QIC_SYS_INT, QIC_INTERRUPT_CLEAR0); - break; - } - /* also clear at the VIC, just in case (nop for non-extended proc) */ - ack_VIC_CPI(cpi); -} - -/* Acknowledge receipt of CPI in the VIC (essentially an EOI) */ -static void ack_VIC_CPI(__u8 cpi) -{ -#ifdef VOYAGER_DEBUG - unsigned long flags; - __u16 isr; - __u8 cpu = smp_processor_id(); - - local_irq_save(flags); - isr = vic_read_isr(); - if ((isr & (1 << (cpi & 7))) == 0) { - printk("VOYAGER SMP: CPU%d lost CPI%d\n", cpu, cpi); - } -#endif - /* send specific EOI; the two system interrupts have - * bit 4 set for a separate vector but behave as the - * corresponding 3 bit intr */ - outb_p(0x60 | (cpi & 7), 0x20); - -#ifdef VOYAGER_DEBUG - if ((vic_read_isr() & (1 << (cpi & 7))) != 0) { - printk("VOYAGER SMP: CPU%d still asserting CPI%d\n", cpu, cpi); - } - local_irq_restore(flags); -#endif -} - -/* cribbed with thanks from irq.c */ -#define __byte(x,y) (((unsigned char *)&(y))[x]) -#define cached_21(cpu) (__byte(0,vic_irq_mask[cpu])) -#define cached_A1(cpu) (__byte(1,vic_irq_mask[cpu])) - -static unsigned int startup_vic_irq(unsigned int irq) -{ - unmask_vic_irq(irq); - - return 0; -} - -/* The enable and disable routines. This is where we run into - * conflicting architectural philosophy. Fundamentally, the voyager - * architecture does not expect to have to disable interrupts globally - * (the IRQ controllers belong to each CPU). The processor masquerade - * which is used to start the system shouldn't be used in a running OS - * since it will cause great confusion if two separate CPUs drive to - * the same IRQ controller (I know, I've tried it). - * - * The solution is a variant on the NCR lazy SPL design: - * - * 1) To disable an interrupt, do nothing (other than set the - * IRQ_DISABLED flag). This dares the interrupt actually to arrive. - * - * 2) If the interrupt dares to come in, raise the local mask against - * it (this will result in all the CPU masks being raised - * eventually). - * - * 3) To enable the interrupt, lower the mask on the local CPU and - * broadcast an Interrupt enable CPI which causes all other CPUs to - * adjust their masks accordingly. */ - -static void unmask_vic_irq(unsigned int irq) -{ - /* linux doesn't to processor-irq affinity, so enable on - * all CPUs we know about */ - int cpu = smp_processor_id(), real_cpu; - __u16 mask = (1 << irq); - __u32 processorList = 0; - unsigned long flags; - - VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n", - irq, cpu, cpu_irq_affinity[cpu])); - spin_lock_irqsave(&vic_irq_lock, flags); - for_each_online_cpu(real_cpu) { - if (!(voyager_extended_vic_processors & (1 << real_cpu))) - continue; - if (!(cpu_irq_affinity[real_cpu] & mask)) { - /* irq has no affinity for this CPU, ignore */ - continue; - } - if (real_cpu == cpu) { - enable_local_vic_irq(irq); - } else if (vic_irq_mask[real_cpu] & mask) { - vic_irq_enable_mask[real_cpu] |= mask; - processorList |= (1 << real_cpu); - } - } - spin_unlock_irqrestore(&vic_irq_lock, flags); - if (processorList) - send_CPI(processorList, VIC_ENABLE_IRQ_CPI); -} - -static void mask_vic_irq(unsigned int irq) -{ - /* lazy disable, do nothing */ -} - -static void enable_local_vic_irq(unsigned int irq) -{ - __u8 cpu = smp_processor_id(); - __u16 mask = ~(1 << irq); - __u16 old_mask = vic_irq_mask[cpu]; - - vic_irq_mask[cpu] &= mask; - if (vic_irq_mask[cpu] == old_mask) - return; - - VDEBUG(("VOYAGER DEBUG: Enabling irq %d in hardware on CPU %d\n", - irq, cpu)); - - if (irq & 8) { - outb_p(cached_A1(cpu), 0xA1); - (void)inb_p(0xA1); - } else { - outb_p(cached_21(cpu), 0x21); - (void)inb_p(0x21); - } -} - -static void disable_local_vic_irq(unsigned int irq) -{ - __u8 cpu = smp_processor_id(); - __u16 mask = (1 << irq); - __u16 old_mask = vic_irq_mask[cpu]; - - if (irq == 7) - return; - - vic_irq_mask[cpu] |= mask; - if (old_mask == vic_irq_mask[cpu]) - return; - - VDEBUG(("VOYAGER DEBUG: Disabling irq %d in hardware on CPU %d\n", - irq, cpu)); - - if (irq & 8) { - outb_p(cached_A1(cpu), 0xA1); - (void)inb_p(0xA1); - } else { - outb_p(cached_21(cpu), 0x21); - (void)inb_p(0x21); - } -} - -/* The VIC is level triggered, so the ack can only be issued after the - * interrupt completes. However, we do Voyager lazy interrupt - * handling here: It is an extremely expensive operation to mask an - * interrupt in the vic, so we merely set a flag (IRQ_DISABLED). If - * this interrupt actually comes in, then we mask and ack here to push - * the interrupt off to another CPU */ -static void before_handle_vic_irq(unsigned int irq) -{ - irq_desc_t *desc = irq_to_desc(irq); - __u8 cpu = smp_processor_id(); - - _raw_spin_lock(&vic_irq_lock); - vic_intr_total++; - vic_intr_count[cpu]++; - - if (!(cpu_irq_affinity[cpu] & (1 << irq))) { - /* The irq is not in our affinity mask, push it off - * onto another CPU */ - VDEBUG(("VOYAGER DEBUG: affinity triggered disable of irq %d " - "on cpu %d\n", irq, cpu)); - disable_local_vic_irq(irq); - /* set IRQ_INPROGRESS to prevent the handler in irq.c from - * actually calling the interrupt routine */ - desc->status |= IRQ_REPLAY | IRQ_INPROGRESS; - } else if (desc->status & IRQ_DISABLED) { - /* Damn, the interrupt actually arrived, do the lazy - * disable thing. The interrupt routine in irq.c will - * not handle a IRQ_DISABLED interrupt, so nothing more - * need be done here */ - VDEBUG(("VOYAGER DEBUG: lazy disable of irq %d on CPU %d\n", - irq, cpu)); - disable_local_vic_irq(irq); - desc->status |= IRQ_REPLAY; - } else { - desc->status &= ~IRQ_REPLAY; - } - - _raw_spin_unlock(&vic_irq_lock); -} - -/* Finish the VIC interrupt: basically mask */ -static void after_handle_vic_irq(unsigned int irq) -{ - irq_desc_t *desc = irq_to_desc(irq); - - _raw_spin_lock(&vic_irq_lock); - { - unsigned int status = desc->status & ~IRQ_INPROGRESS; -#ifdef VOYAGER_DEBUG - __u16 isr; -#endif - - desc->status = status; - if ((status & IRQ_DISABLED)) - disable_local_vic_irq(irq); -#ifdef VOYAGER_DEBUG - /* DEBUG: before we ack, check what's in progress */ - isr = vic_read_isr(); - if ((isr & (1 << irq) && !(status & IRQ_REPLAY)) == 0) { - int i; - __u8 cpu = smp_processor_id(); - __u8 real_cpu; - int mask; /* Um... initialize me??? --RR */ - - printk("VOYAGER SMP: CPU%d lost interrupt %d\n", - cpu, irq); - for_each_possible_cpu(real_cpu, mask) { - - outb(VIC_CPU_MASQUERADE_ENABLE | real_cpu, - VIC_PROCESSOR_ID); - isr = vic_read_isr(); - if (isr & (1 << irq)) { - printk - ("VOYAGER SMP: CPU%d ack irq %d\n", - real_cpu, irq); - ack_vic_irq(irq); - } - outb(cpu, VIC_PROCESSOR_ID); - } - } -#endif /* VOYAGER_DEBUG */ - /* as soon as we ack, the interrupt is eligible for - * receipt by another CPU so everything must be in - * order here */ - ack_vic_irq(irq); - if (status & IRQ_REPLAY) { - /* replay is set if we disable the interrupt - * in the before_handle_vic_irq() routine, so - * clear the in progress bit here to allow the - * next CPU to handle this correctly */ - desc->status &= ~(IRQ_REPLAY | IRQ_INPROGRESS); - } -#ifdef VOYAGER_DEBUG - isr = vic_read_isr(); - if ((isr & (1 << irq)) != 0) - printk("VOYAGER SMP: after_handle_vic_irq() after " - "ack irq=%d, isr=0x%x\n", irq, isr); -#endif /* VOYAGER_DEBUG */ - } - _raw_spin_unlock(&vic_irq_lock); - - /* All code after this point is out of the main path - the IRQ - * may be intercepted by another CPU if reasserted */ -} - -/* Linux processor - interrupt affinity manipulations. - * - * For each processor, we maintain a 32 bit irq affinity mask. - * Initially it is set to all 1's so every processor accepts every - * interrupt. In this call, we change the processor's affinity mask: - * - * Change from enable to disable: - * - * If the interrupt ever comes in to the processor, we will disable it - * and ack it to push it off to another CPU, so just accept the mask here. - * - * Change from disable to enable: - * - * change the mask and then do an interrupt enable CPI to re-enable on - * the selected processors */ - -void set_vic_irq_affinity(unsigned int irq, const struct cpumask *mask) -{ - /* Only extended processors handle interrupts */ - unsigned long real_mask; - unsigned long irq_mask = 1 << irq; - int cpu; - - real_mask = cpus_addr(*mask)[0] & voyager_extended_vic_processors; - - if (cpus_addr(*mask)[0] == 0) - /* can't have no CPUs to accept the interrupt -- extremely - * bad things will happen */ - return; - - if (irq == 0) - /* can't change the affinity of the timer IRQ. This - * is due to the constraint in the voyager - * architecture that the CPI also comes in on and IRQ - * line and we have chosen IRQ0 for this. If you - * raise the mask on this interrupt, the processor - * will no-longer be able to accept VIC CPIs */ - return; - - if (irq >= 32) - /* You can only have 32 interrupts in a voyager system - * (and 32 only if you have a secondary microchannel - * bus) */ - return; - - for_each_online_cpu(cpu) { - unsigned long cpu_mask = 1 << cpu; - - if (cpu_mask & real_mask) { - /* enable the interrupt for this cpu */ - cpu_irq_affinity[cpu] |= irq_mask; - } else { - /* disable the interrupt for this cpu */ - cpu_irq_affinity[cpu] &= ~irq_mask; - } - } - /* this is magic, we now have the correct affinity maps, so - * enable the interrupt. This will send an enable CPI to - * those CPUs who need to enable it in their local masks, - * causing them to correct for the new affinity . If the - * interrupt is currently globally disabled, it will simply be - * disabled again as it comes in (voyager lazy disable). If - * the affinity map is tightened to disable the interrupt on a - * cpu, it will be pushed off when it comes in */ - unmask_vic_irq(irq); -} - -static void ack_vic_irq(unsigned int irq) -{ - if (irq & 8) { - outb(0x62, 0x20); /* Specific EOI to cascade */ - outb(0x60 | (irq & 7), 0xA0); - } else { - outb(0x60 | (irq & 7), 0x20); - } -} - -/* enable the CPIs. In the VIC, the CPIs are delivered by the 8259 - * but are not vectored by it. This means that the 8259 mask must be - * lowered to receive them */ -static __init void vic_enable_cpi(void) -{ - __u8 cpu = smp_processor_id(); - - /* just take a copy of the current mask (nop for boot cpu) */ - vic_irq_mask[cpu] = vic_irq_mask[boot_cpu_id]; - - enable_local_vic_irq(VIC_CPI_LEVEL0); - enable_local_vic_irq(VIC_CPI_LEVEL1); - /* for sys int and cmn int */ - enable_local_vic_irq(7); - - if (is_cpu_quad()) { - outb(QIC_DEFAULT_MASK0, QIC_MASK_REGISTER0); - outb(QIC_CPI_ENABLE, QIC_MASK_REGISTER1); - VDEBUG(("VOYAGER SMP: QIC ENABLE CPI: CPU%d: MASK 0x%x\n", - cpu, QIC_CPI_ENABLE)); - } - - VDEBUG(("VOYAGER SMP: ENABLE CPI: CPU%d: MASK 0x%x\n", - cpu, vic_irq_mask[cpu])); -} - -void voyager_smp_dump() -{ - int old_cpu = smp_processor_id(), cpu; - - /* dump the interrupt masks of each processor */ - for_each_online_cpu(cpu) { - __u16 imr, isr, irr; - unsigned long flags; - - local_irq_save(flags); - outb(VIC_CPU_MASQUERADE_ENABLE | cpu, VIC_PROCESSOR_ID); - imr = (inb(0xa1) << 8) | inb(0x21); - outb(0x0a, 0xa0); - irr = inb(0xa0) << 8; - outb(0x0a, 0x20); - irr |= inb(0x20); - outb(0x0b, 0xa0); - isr = inb(0xa0) << 8; - outb(0x0b, 0x20); - isr |= inb(0x20); - outb(old_cpu, VIC_PROCESSOR_ID); - local_irq_restore(flags); - printk("\tCPU%d: mask=0x%x, IMR=0x%x, IRR=0x%x, ISR=0x%x\n", - cpu, vic_irq_mask[cpu], imr, irr, isr); -#if 0 - /* These lines are put in to try to unstick an un ack'd irq */ - if (isr != 0) { - int irq; - for (irq = 0; irq < 16; irq++) { - if (isr & (1 << irq)) { - printk("\tCPU%d: ack irq %d\n", - cpu, irq); - local_irq_save(flags); - outb(VIC_CPU_MASQUERADE_ENABLE | cpu, - VIC_PROCESSOR_ID); - ack_vic_irq(irq); - outb(old_cpu, VIC_PROCESSOR_ID); - local_irq_restore(flags); - } - } - } -#endif - } -} - -void smp_voyager_power_off(void *dummy) -{ - if (smp_processor_id() == boot_cpu_id) - voyager_power_off(); - else - smp_stop_cpu_function(NULL); -} - -static void __init voyager_smp_prepare_cpus(unsigned int max_cpus) -{ - /* FIXME: ignore max_cpus for now */ - smp_boot_cpus(); -} - -static void __cpuinit voyager_smp_prepare_boot_cpu(void) -{ - int cpu = smp_processor_id(); - switch_to_new_gdt(cpu); - - cpu_set(cpu, cpu_online_map); - cpu_set(cpu, cpu_callout_map); - cpu_set(cpu, cpu_possible_map); - cpu_set(cpu, cpu_present_map); - -} - -static int __cpuinit voyager_cpu_up(unsigned int cpu) -{ - /* This only works at boot for x86. See "rewrite" above. */ - if (cpu_isset(cpu, smp_commenced_mask)) - return -ENOSYS; - - /* In case one didn't come up */ - if (!cpu_isset(cpu, cpu_callin_map)) - return -EIO; - /* Unleash the CPU! */ - cpu_set(cpu, smp_commenced_mask); - while (!cpu_online(cpu)) - mb(); - return 0; -} - -static void __init voyager_smp_cpus_done(unsigned int max_cpus) -{ - zap_low_mappings(); -} - -void __init smp_setup_processor_id(void) -{ - current_thread_info()->cpu = hard_smp_processor_id(); -} - -static void voyager_send_call_func(const struct cpumask *callmask) -{ - __u32 mask = cpus_addr(*callmask)[0] & ~(1 << smp_processor_id()); - send_CPI(mask, VIC_CALL_FUNCTION_CPI); -} - -static void voyager_send_call_func_single(int cpu) -{ - send_CPI(1 << cpu, VIC_CALL_FUNCTION_SINGLE_CPI); -} - -struct smp_ops smp_ops = { - .smp_prepare_boot_cpu = voyager_smp_prepare_boot_cpu, - .smp_prepare_cpus = voyager_smp_prepare_cpus, - .cpu_up = voyager_cpu_up, - .smp_cpus_done = voyager_smp_cpus_done, - - .smp_send_stop = voyager_smp_send_stop, - .smp_send_reschedule = voyager_smp_send_reschedule, - - .send_call_func_ipi = voyager_send_call_func, - .send_call_func_single_ipi = voyager_send_call_func_single, -}; |