diff options
Diffstat (limited to 'arch/x86/kernel/cpu')
24 files changed, 1718 insertions, 1823 deletions
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile index 3ede19a4e0b2..7f0b45a5d788 100644 --- a/arch/x86/kernel/cpu/Makefile +++ b/arch/x86/kernel/cpu/Makefile @@ -3,19 +3,17 @@ # obj-y := intel_cacheinfo.o addon_cpuid_features.o -obj-y += proc.o capflags.o powerflags.o +obj-y += proc.o capflags.o powerflags.o common.o -obj-$(CONFIG_X86_32) += common.o bugs.o cmpxchg.o -obj-$(CONFIG_X86_64) += common_64.o bugs_64.o +obj-$(CONFIG_X86_32) += bugs.o cmpxchg.o +obj-$(CONFIG_X86_64) += bugs_64.o -obj-$(CONFIG_CPU_SUP_AMD_32) += amd.o -obj-$(CONFIG_CPU_SUP_AMD_64) += amd_64.o +obj-$(CONFIG_CPU_SUP_INTEL) += intel.o +obj-$(CONFIG_CPU_SUP_AMD) += amd.o obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o obj-$(CONFIG_CPU_SUP_CENTAUR_32) += centaur.o obj-$(CONFIG_CPU_SUP_CENTAUR_64) += centaur_64.o obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o -obj-$(CONFIG_CPU_SUP_INTEL_32) += intel.o -obj-$(CONFIG_CPU_SUP_INTEL_64) += intel_64.o obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o obj-$(CONFIG_X86_MCE) += mcheck/ diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index a6ef672adbba..0d9c993aa93e 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -7,6 +7,8 @@ #include <asm/pat.h> #include <asm/processor.h> +#include <mach_apic.h> + struct cpuid_bit { u16 feature; u8 reg; @@ -48,6 +50,92 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) } } +/* leaf 0xb SMT level */ +#define SMT_LEVEL 0 + +/* leaf 0xb sub-leaf types */ +#define INVALID_TYPE 0 +#define SMT_TYPE 1 +#define CORE_TYPE 2 + +#define LEAFB_SUBTYPE(ecx) (((ecx) >> 8) & 0xff) +#define BITS_SHIFT_NEXT_LEVEL(eax) ((eax) & 0x1f) +#define LEVEL_MAX_SIBLINGS(ebx) ((ebx) & 0xffff) + +/* + * Check for extended topology enumeration cpuid leaf 0xb and if it + * exists, use it for populating initial_apicid and cpu topology + * detection. + */ +void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned int eax, ebx, ecx, edx, sub_index; + unsigned int ht_mask_width, core_plus_mask_width; + unsigned int core_select_mask, core_level_siblings; + + if (c->cpuid_level < 0xb) + return; + + cpuid_count(0xb, SMT_LEVEL, &eax, &ebx, &ecx, &edx); + + /* + * check if the cpuid leaf 0xb is actually implemented. + */ + if (ebx == 0 || (LEAFB_SUBTYPE(ecx) != SMT_TYPE)) + return; + + set_cpu_cap(c, X86_FEATURE_XTOPOLOGY); + + /* + * initial apic id, which also represents 32-bit extended x2apic id. + */ + c->initial_apicid = edx; + + /* + * Populate HT related information from sub-leaf level 0. + */ + core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); + + sub_index = 1; + do { + cpuid_count(0xb, sub_index, &eax, &ebx, &ecx, &edx); + + /* + * Check for the Core type in the implemented sub leaves. + */ + if (LEAFB_SUBTYPE(ecx) == CORE_TYPE) { + core_level_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); + break; + } + + sub_index++; + } while (LEAFB_SUBTYPE(ecx) != INVALID_TYPE); + + core_select_mask = (~(-1 << core_plus_mask_width)) >> ht_mask_width; + +#ifdef CONFIG_X86_32 + c->cpu_core_id = phys_pkg_id(c->initial_apicid, ht_mask_width) + & core_select_mask; + c->phys_proc_id = phys_pkg_id(c->initial_apicid, core_plus_mask_width); +#else + c->cpu_core_id = phys_pkg_id(ht_mask_width) & core_select_mask; + c->phys_proc_id = phys_pkg_id(core_plus_mask_width); +#endif + c->x86_max_cores = (core_level_siblings / smp_num_siblings); + + + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + if (c->x86_max_cores > 1) + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + return; +#endif +} + #ifdef CONFIG_X86_PAT void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) { diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index cae9cabc3031..32e73520adf7 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -1,13 +1,22 @@ #include <linux/init.h> #include <linux/bitops.h> #include <linux/mm.h> + #include <asm/io.h> #include <asm/processor.h> #include <asm/apic.h> +#ifdef CONFIG_X86_64 +# include <asm/numa_64.h> +# include <asm/mmconfig.h> +# include <asm/cacheflush.h> +#endif + #include <mach_apic.h> + #include "cpu.h" +#ifdef CONFIG_X86_32 /* * B step AMD K6 before B 9730xxxx have hardware bugs that can cause * misexecution of code under Linux. Owners of such processors should @@ -24,21 +33,273 @@ extern void vide(void); __asm__(".align 4\nvide: ret"); -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c) { - if (cpuid_eax(0x80000000) >= 0x80000007) { - c->x86_power = cpuid_edx(0x80000007); - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); +/* + * General Systems BIOSen alias the cpu frequency registers + * of the Elan at 0x000df000. Unfortuantly, one of the Linux + * drivers subsequently pokes it, and changes the CPU speed. + * Workaround : Remove the unneeded alias. + */ +#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ +#define CBAR_ENB (0x80000000) +#define CBAR_KEY (0X000000CB) + if (c->x86_model == 9 || c->x86_model == 10) { + if (inl (CBAR) & CBAR_ENB) + outl (0 | CBAR_KEY, CBAR); } } -static void __cpuinit init_amd(struct cpuinfo_x86 *c) + +static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) { u32 l, h; int mbytes = num_physpages >> (20-PAGE_SHIFT); - int r; + if (c->x86_model < 6) { + /* Based on AMD doc 20734R - June 2000 */ + if (c->x86_model == 0) { + clear_cpu_cap(c, X86_FEATURE_APIC); + set_cpu_cap(c, X86_FEATURE_PGE); + } + return; + } + + if (c->x86_model == 6 && c->x86_mask == 1) { + const int K6_BUG_LOOP = 1000000; + int n; + void (*f_vide)(void); + unsigned long d, d2; + + printk(KERN_INFO "AMD K6 stepping B detected - "); + + /* + * It looks like AMD fixed the 2.6.2 bug and improved indirect + * calls at the same time. + */ + + n = K6_BUG_LOOP; + f_vide = vide; + rdtscl(d); + while (n--) + f_vide(); + rdtscl(d2); + d = d2-d; + + if (d > 20*K6_BUG_LOOP) + printk("system stability may be impaired when more than 32 MB are used.\n"); + else + printk("probably OK (after B9730xxxx).\n"); + printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); + } + + /* K6 with old style WHCR */ + if (c->x86_model < 8 || + (c->x86_model == 8 && c->x86_mask < 8)) { + /* We can only write allocate on the low 508Mb */ + if (mbytes > 508) + mbytes = 508; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0x0000FFFF) == 0) { + unsigned long flags; + l = (1<<0)|((mbytes/4)<<1); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", + mbytes); + } + return; + } + + if ((c->x86_model == 8 && c->x86_mask > 7) || + c->x86_model == 9 || c->x86_model == 13) { + /* The more serious chips .. */ + + if (mbytes > 4092) + mbytes = 4092; + + rdmsr(MSR_K6_WHCR, l, h); + if ((l&0xFFFF0000) == 0) { + unsigned long flags; + l = ((mbytes>>2)<<22)|(1<<16); + local_irq_save(flags); + wbinvd(); + wrmsr(MSR_K6_WHCR, l, h); + local_irq_restore(flags); + printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", + mbytes); + } + + return; + } + + if (c->x86_model == 10) { + /* AMD Geode LX is model 10 */ + /* placeholder for any needed mods */ + return; + } +} + +static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c) +{ + u32 l, h; + + /* + * Bit 15 of Athlon specific MSR 15, needs to be 0 + * to enable SSE on Palomino/Morgan/Barton CPU's. + * If the BIOS didn't enable it already, enable it here. + */ + if (c->x86_model >= 6 && c->x86_model <= 10) { + if (!cpu_has(c, X86_FEATURE_XMM)) { + printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); + rdmsr(MSR_K7_HWCR, l, h); + l &= ~0x00008000; + wrmsr(MSR_K7_HWCR, l, h); + set_cpu_cap(c, X86_FEATURE_XMM); + } + } + + /* + * It's been determined by AMD that Athlons since model 8 stepping 1 + * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx + * As per AMD technical note 27212 0.2 + */ + if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { + rdmsr(MSR_K7_CLK_CTL, l, h); + if ((l & 0xfff00000) != 0x20000000) { + printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, + ((l & 0x000fffff)|0x20000000)); + wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); + } + } + + set_cpu_cap(c, X86_FEATURE_K7); +} +#endif + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) +static int __cpuinit nearby_node(int apicid) +{ + int i, node; + + for (i = apicid - 1; i >= 0; i--) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { + node = apicid_to_node[i]; + if (node != NUMA_NO_NODE && node_online(node)) + return node; + } + return first_node(node_online_map); /* Shouldn't happen */ +} +#endif + +/* + * On a AMD dual core setup the lower bits of the APIC id distingush the cores. + * Assumes number of cores is a power of two. + */ +static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_HT + unsigned bits; + + bits = c->x86_coreid_bits; + + /* Low order bits define the core id (index of core in socket) */ + c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); + /* Convert the initial APIC ID into the socket ID */ + c->phys_proc_id = c->initial_apicid >> bits; +#endif +} + +static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) +{ +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + int cpu = smp_processor_id(); + int node; + unsigned apicid = hard_smp_processor_id(); + + node = c->phys_proc_id; + if (apicid_to_node[apicid] != NUMA_NO_NODE) + node = apicid_to_node[apicid]; + if (!node_online(node)) { + /* Two possibilities here: + - The CPU is missing memory and no node was created. + In that case try picking one from a nearby CPU + - The APIC IDs differ from the HyperTransport node IDs + which the K8 northbridge parsing fills in. + Assume they are all increased by a constant offset, + but in the same order as the HT nodeids. + If that doesn't result in a usable node fall back to the + path for the previous case. */ + + int ht_nodeid = c->initial_apicid; + + if (ht_nodeid >= 0 && + apicid_to_node[ht_nodeid] != NUMA_NO_NODE) + node = apicid_to_node[ht_nodeid]; + /* Pick a nearby node */ + if (!node_online(node)) + node = nearby_node(apicid); + } + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} + +static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_HT + unsigned bits, ecx; + + /* Multi core CPU? */ + if (c->extended_cpuid_level < 0x80000008) + return; + + ecx = cpuid_ecx(0x80000008); + + c->x86_max_cores = (ecx & 0xff) + 1; + + /* CPU telling us the core id bits shift? */ + bits = (ecx >> 12) & 0xF; + + /* Otherwise recompute */ + if (bits == 0) { + while ((1 << bits) < c->x86_max_cores) + bits++; + } + + c->x86_coreid_bits = bits; +#endif +} + +static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) +{ + early_init_amd_mc(c); + + /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ + if (c->x86_power & (1<<8)) + set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + +#ifdef CONFIG_X86_64 + set_cpu_cap(c, X86_FEATURE_SYSCALL32); +#else + /* Set MTRR capability flag if appropriate */ + if (c->x86 == 5) + if (c->x86_model == 13 || c->x86_model == 9 || + (c->x86_model == 8 && c->x86_mask >= 8)) + set_cpu_cap(c, X86_FEATURE_K6_MTRR); +#endif +} + +static void __cpuinit init_amd(struct cpuinfo_x86 *c) +{ #ifdef CONFIG_SMP unsigned long long value; @@ -49,7 +310,7 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) * Errata 63 for SH-B3 steppings * Errata 122 for all steppings (F+ have it disabled by default) */ - if (c->x86 == 15) { + if (c->x86 == 0xf) { rdmsrl(MSR_K7_HWCR, value); value |= 1 << 6; wrmsrl(MSR_K7_HWCR, value); @@ -59,213 +320,119 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) early_init_amd(c); /* - * FIXME: We should handle the K5 here. Set up the write - * range and also turn on MSR 83 bits 4 and 31 (write alloc, - * no bus pipeline) - */ - - /* * Bit 31 in normal CPUID used for nonstandard 3DNow ID; * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ clear_cpu_cap(c, 0*32+31); - r = get_model_name(c); +#ifdef CONFIG_X86_64 + /* On C+ stepping K8 rep microcode works well for copy/memset */ + if (c->x86 == 0xf) { + u32 level; - switch (c->x86) { - case 4: - /* - * General Systems BIOSen alias the cpu frequency registers - * of the Elan at 0x000df000. Unfortuantly, one of the Linux - * drivers subsequently pokes it, and changes the CPU speed. - * Workaround : Remove the unneeded alias. - */ -#define CBAR (0xfffc) /* Configuration Base Address (32-bit) */ -#define CBAR_ENB (0x80000000) -#define CBAR_KEY (0X000000CB) - if (c->x86_model == 9 || c->x86_model == 10) { - if (inl (CBAR) & CBAR_ENB) - outl (0 | CBAR_KEY, CBAR); - } - break; - case 5: - if (c->x86_model < 6) { - /* Based on AMD doc 20734R - June 2000 */ - if (c->x86_model == 0) { - clear_cpu_cap(c, X86_FEATURE_APIC); - set_cpu_cap(c, X86_FEATURE_PGE); - } - break; - } - - if (c->x86_model == 6 && c->x86_mask == 1) { - const int K6_BUG_LOOP = 1000000; - int n; - void (*f_vide)(void); - unsigned long d, d2; - - printk(KERN_INFO "AMD K6 stepping B detected - "); - - /* - * It looks like AMD fixed the 2.6.2 bug and improved indirect - * calls at the same time. - */ - - n = K6_BUG_LOOP; - f_vide = vide; - rdtscl(d); - while (n--) - f_vide(); - rdtscl(d2); - d = d2-d; - - if (d > 20*K6_BUG_LOOP) - printk("system stability may be impaired when more than 32 MB are used.\n"); - else - printk("probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); - } - - /* K6 with old style WHCR */ - if (c->x86_model < 8 || - (c->x86_model == 8 && c->x86_mask < 8)) { - /* We can only write allocate on the low 508Mb */ - if (mbytes > 508) - mbytes = 508; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0x0000FFFF) == 0) { - unsigned long flags; - l = (1<<0)|((mbytes/4)<<1); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n", - mbytes); - } - break; - } - - if ((c->x86_model == 8 && c->x86_mask > 7) || - c->x86_model == 9 || c->x86_model == 13) { - /* The more serious chips .. */ - - if (mbytes > 4092) - mbytes = 4092; - - rdmsr(MSR_K6_WHCR, l, h); - if ((l&0xFFFF0000) == 0) { - unsigned long flags; - l = ((mbytes>>2)<<22)|(1<<16); - local_irq_save(flags); - wbinvd(); - wrmsr(MSR_K6_WHCR, l, h); - local_irq_restore(flags); - printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n", - mbytes); - } - - /* Set MTRR capability flag if appropriate */ - if (c->x86_model == 13 || c->x86_model == 9 || - (c->x86_model == 8 && c->x86_mask >= 8)) - set_cpu_cap(c, X86_FEATURE_K6_MTRR); - break; - } - - if (c->x86_model == 10) { - /* AMD Geode LX is model 10 */ - /* placeholder for any needed mods */ - break; - } - break; - case 6: /* An Athlon/Duron */ - - /* - * Bit 15 of Athlon specific MSR 15, needs to be 0 - * to enable SSE on Palomino/Morgan/Barton CPU's. - * If the BIOS didn't enable it already, enable it here. - */ - if (c->x86_model >= 6 && c->x86_model <= 10) { - if (!cpu_has(c, X86_FEATURE_XMM)) { - printk(KERN_INFO "Enabling disabled K7/SSE Support.\n"); - rdmsr(MSR_K7_HWCR, l, h); - l &= ~0x00008000; - wrmsr(MSR_K7_HWCR, l, h); - set_cpu_cap(c, X86_FEATURE_XMM); - } - } - - /* - * It's been determined by AMD that Athlons since model 8 stepping 1 - * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx - * As per AMD technical note 27212 0.2 - */ - if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) { - rdmsr(MSR_K7_CLK_CTL, l, h); - if ((l & 0xfff00000) != 0x20000000) { - printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l, - ((l & 0x000fffff)|0x20000000)); - wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h); - } - } - break; + level = cpuid_eax(1); + if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); } + if (c->x86 == 0x10 || c->x86 == 0x11) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); +#else + + /* + * FIXME: We should handle the K5 here. Set up the write + * range and also turn on MSR 83 bits 4 and 31 (write alloc, + * no bus pipeline) + */ switch (c->x86) { - case 15: - /* Use K8 tuning for Fam10h and Fam11h */ - case 0x10: - case 0x11: - set_cpu_cap(c, X86_FEATURE_K8); + case 4: + init_amd_k5(c); break; - case 6: - set_cpu_cap(c, X86_FEATURE_K7); + case 5: + init_amd_k6(c); + break; + case 6: /* An Athlon/Duron */ + init_amd_k7(c); break; } + + /* K6s reports MCEs but don't actually have all the MSRs */ + if (c->x86 < 6) + clear_cpu_cap(c, X86_FEATURE_MCE); +#endif + + /* Enable workaround for FXSAVE leak */ if (c->x86 >= 6) set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - display_cacheinfo(c); - - if (cpuid_eax(0x80000000) >= 0x80000008) - c->x86_max_cores = (cpuid_ecx(0x80000008) & 0xff) + 1; + if (!c->x86_model_id[0]) { + switch (c->x86) { + case 0xf: + /* Should distinguish Models here, but this is only + a fallback anyways. */ + strcpy(c->x86_model_id, "Hammer"); + break; + } + } -#ifdef CONFIG_X86_HT - /* - * On a AMD multi core setup the lower bits of the APIC id - * distinguish the cores. - */ - if (c->x86_max_cores > 1) { - int cpu = smp_processor_id(); - unsigned bits = (cpuid_ecx(0x80000008) >> 12) & 0xf; + display_cacheinfo(c); - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - c->cpu_core_id = c->phys_proc_id & ((1<<bits)-1); - c->phys_proc_id >>= bits; - printk(KERN_INFO "CPU %d(%d) -> Core %d\n", - cpu, c->x86_max_cores, c->cpu_core_id); + /* Multi core CPU? */ + if (c->extended_cpuid_level >= 0x80000008) { + amd_detect_cmp(c); + srat_detect_node(c); } + +#ifdef CONFIG_X86_32 + detect_ht(c); #endif - if (cpuid_eax(0x80000000) >= 0x80000006) { - if ((c->x86 == 0x10) && (cpuid_edx(0x80000006) & 0xf000)) + if (c->extended_cpuid_level >= 0x80000006) { + if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000)) num_cache_leaves = 4; else num_cache_leaves = 3; } - /* K6s reports MCEs but don't actually have all the MSRs */ - if (c->x86 < 6) - clear_cpu_cap(c, X86_FEATURE_MCE); + if (c->x86 >= 0xf && c->x86 <= 0x11) + set_cpu_cap(c, X86_FEATURE_K8); - if (cpu_has_xmm2) + if (cpu_has_xmm2) { + /* MFENCE stops RDTSC speculation */ set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); + } + +#ifdef CONFIG_X86_64 + if (c->x86 == 0x10) { + /* do this for boot cpu */ + if (c == &boot_cpu_data) + check_enable_amd_mmconf_dmi(); + + fam10h_check_enable_mmcfg(); + } + + if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { + unsigned long long tseg; + + /* + * Split up direct mapping around the TSEG SMM area. + * Don't do it for gbpages because there seems very little + * benefit in doing so. + */ + if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { + printk(KERN_DEBUG "tseg: %010llx\n", tseg); + if ((tseg>>PMD_SHIFT) < + (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) || + ((tseg>>PMD_SHIFT) < + (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) && + (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT)))) + set_memory_4k((unsigned long)__va(tseg), 1); + } + } +#endif } +#ifdef CONFIG_X86_32 static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* AMD errata T13 (order #21922) */ @@ -278,10 +445,12 @@ static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int } return size; } +#endif static struct cpu_dev amd_cpu_dev __cpuinitdata = { .c_vendor = "AMD", .c_ident = { "AuthenticAMD" }, +#ifdef CONFIG_X86_32 .c_models = { { .vendor = X86_VENDOR_AMD, .family = 4, .model_names = { @@ -294,9 +463,11 @@ static struct cpu_dev amd_cpu_dev __cpuinitdata = { } }, }, + .c_size_cache = amd_size_cache, +#endif .c_early_init = early_init_amd, .c_init = init_amd, - .c_size_cache = amd_size_cache, + .c_x86_vendor = X86_VENDOR_AMD, }; -cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); +cpu_dev_register(amd_cpu_dev); diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c deleted file mode 100644 index d1692b2a41ff..000000000000 --- a/arch/x86/kernel/cpu/amd_64.c +++ /dev/null @@ -1,224 +0,0 @@ -#include <linux/init.h> -#include <linux/mm.h> - -#include <asm/numa_64.h> -#include <asm/mmconfig.h> -#include <asm/cacheflush.h> - -#include <mach_apic.h> - -#include "cpu.h" - -int force_mwait __cpuinitdata; - -#ifdef CONFIG_NUMA -static int __cpuinit nearby_node(int apicid) -{ - int i, node; - - for (i = apicid - 1; i >= 0; i--) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) { - node = apicid_to_node[i]; - if (node != NUMA_NO_NODE && node_online(node)) - return node; - } - return first_node(node_online_map); /* Shouldn't happen */ -} -#endif - -/* - * On a AMD dual core setup the lower bits of the APIC id distingush the cores. - * Assumes number of cores is a power of two. - */ -static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits; -#ifdef CONFIG_NUMA - int cpu = smp_processor_id(); - int node = 0; - unsigned apicid = hard_smp_processor_id(); -#endif - bits = c->x86_coreid_bits; - - /* Low order bits define the core id (index of core in socket) */ - c->cpu_core_id = c->initial_apicid & ((1 << bits)-1); - /* Convert the initial APIC ID into the socket ID */ - c->phys_proc_id = c->initial_apicid >> bits; - -#ifdef CONFIG_NUMA - node = c->phys_proc_id; - if (apicid_to_node[apicid] != NUMA_NO_NODE) - node = apicid_to_node[apicid]; - if (!node_online(node)) { - /* Two possibilities here: - - The CPU is missing memory and no node was created. - In that case try picking one from a nearby CPU - - The APIC IDs differ from the HyperTransport node IDs - which the K8 northbridge parsing fills in. - Assume they are all increased by a constant offset, - but in the same order as the HT nodeids. - If that doesn't result in a usable node fall back to the - path for the previous case. */ - - int ht_nodeid = c->initial_apicid; - - if (ht_nodeid >= 0 && - apicid_to_node[ht_nodeid] != NUMA_NO_NODE) - node = apicid_to_node[ht_nodeid]; - /* Pick a nearby node */ - if (!node_online(node)) - node = nearby_node(apicid); - } - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -#endif -} - -static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - unsigned bits, ecx; - - /* Multi core CPU? */ - if (c->extended_cpuid_level < 0x80000008) - return; - - ecx = cpuid_ecx(0x80000008); - - c->x86_max_cores = (ecx & 0xff) + 1; - - /* CPU telling us the core id bits shift? */ - bits = (ecx >> 12) & 0xF; - - /* Otherwise recompute */ - if (bits == 0) { - while ((1 << bits) < c->x86_max_cores) - bits++; - } - - c->x86_coreid_bits = bits; - -#endif -} - -static void __cpuinit early_init_amd(struct cpuinfo_x86 *c) -{ - early_init_amd_mc(c); - - /* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */ - if (c->x86_power & (1<<8)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - - set_cpu_cap(c, X86_FEATURE_SYSCALL32); -} - -static void __cpuinit init_amd(struct cpuinfo_x86 *c) -{ - unsigned level; - -#ifdef CONFIG_SMP - unsigned long value; - - /* - * Disable TLB flush filter by setting HWCR.FFDIS on K8 - * bit 6 of msr C001_0015 - * - * Errata 63 for SH-B3 steppings - * Errata 122 for all steppings (F+ have it disabled by default) - */ - if (c->x86 == 0xf) { - rdmsrl(MSR_K8_HWCR, value); - value |= 1 << 6; - wrmsrl(MSR_K8_HWCR, value); - } -#endif - - /* Bit 31 in normal CPUID used for nonstandard 3DNow ID; - 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */ - clear_cpu_cap(c, 0*32+31); - - /* On C+ stepping K8 rep microcode works well for copy/memset */ - if (c->x86 == 0xf) { - level = cpuid_eax(1); - if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - } - if (c->x86 == 0x10 || c->x86 == 0x11) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - - /* Enable workaround for FXSAVE leak */ - if (c->x86 >= 6) - set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK); - - level = get_model_name(c); - if (!level) { - switch (c->x86) { - case 0xf: - /* Should distinguish Models here, but this is only - a fallback anyways. */ - strcpy(c->x86_model_id, "Hammer"); - break; - } - } - display_cacheinfo(c); - - /* Multi core CPU? */ - if (c->extended_cpuid_level >= 0x80000008) - amd_detect_cmp(c); - - if (c->extended_cpuid_level >= 0x80000006 && - (cpuid_edx(0x80000006) & 0xf000)) - num_cache_leaves = 4; - else - num_cache_leaves = 3; - - if (c->x86 >= 0xf && c->x86 <= 0x11) - set_cpu_cap(c, X86_FEATURE_K8); - - /* MFENCE stops RDTSC speculation */ - set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC); - - if (c->x86 == 0x10) { - /* do this for boot cpu */ - if (c == &boot_cpu_data) - check_enable_amd_mmconf_dmi(); - - fam10h_check_enable_mmcfg(); - } - - if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) { - unsigned long long tseg; - - /* - * Split up direct mapping around the TSEG SMM area. - * Don't do it for gbpages because there seems very little - * benefit in doing so. - */ - if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) { - printk(KERN_DEBUG "tseg: %010llx\n", tseg); - if ((tseg>>PMD_SHIFT) < - (max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) || - ((tseg>>PMD_SHIFT) < - (max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) && - (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT)))) - set_memory_4k((unsigned long)__va(tseg), 1); - } - } -} - -static struct cpu_dev amd_cpu_dev __cpuinitdata = { - .c_vendor = "AMD", - .c_ident = { "AuthenticAMD" }, - .c_early_init = early_init_amd, - .c_init = init_amd, -}; - -cpu_vendor_dev_register(X86_VENDOR_AMD, &amd_cpu_dev); - diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index e0f45edd6a55..89bfdd9cacc6 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -289,7 +289,6 @@ static void __cpuinit init_c3(struct cpuinfo_x86 *c) if (c->x86_model >= 6 && c->x86_model < 9) set_cpu_cap(c, X86_FEATURE_3DNOW); - get_model_name(c); display_cacheinfo(c); } @@ -314,6 +313,16 @@ enum { EAMD3D = 1<<20, }; +static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) +{ + switch (c->x86) { + case 5: + /* Emulate MTRRs using Centaur's MCR. */ + set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR); + break; + } +} + static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { @@ -462,8 +471,10 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size) static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_vendor = "Centaur", .c_ident = { "CentaurHauls" }, + .c_early_init = early_init_centaur, .c_init = init_centaur, .c_size_cache = centaur_size_cache, + .c_x86_vendor = X86_VENDOR_CENTAUR, }; -cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); +cpu_dev_register(centaur_cpu_dev); diff --git a/arch/x86/kernel/cpu/centaur_64.c b/arch/x86/kernel/cpu/centaur_64.c index 1d181c40e2e1..a1625f5a1e78 100644 --- a/arch/x86/kernel/cpu/centaur_64.c +++ b/arch/x86/kernel/cpu/centaur_64.c @@ -16,9 +16,10 @@ static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c) static void __cpuinit init_centaur(struct cpuinfo_x86 *c) { + early_init_centaur(c); + if (c->x86 == 0x6 && c->x86_model >= 0xf) { c->x86_cache_alignment = c->x86_clflush_size * 2; - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_REP_GOOD); } set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); @@ -29,7 +30,8 @@ static struct cpu_dev centaur_cpu_dev __cpuinitdata = { .c_ident = { "CentaurHauls" }, .c_early_init = early_init_centaur, .c_init = init_centaur, + .c_x86_vendor = X86_VENDOR_CENTAUR, }; -cpu_vendor_dev_register(X86_VENDOR_CENTAUR, ¢aur_cpu_dev); +cpu_dev_register(centaur_cpu_dev); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c63ec65f484c..7581b62df184 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1,28 +1,62 @@ #include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> #include <linux/string.h> +#include <linux/bootmem.h> +#include <linux/bitops.h> +#include <linux/module.h> +#include <linux/kgdb.h> +#include <linux/topology.h> #include <linux/delay.h> #include <linux/smp.h> -#include <linux/module.h> #include <linux/percpu.h> -#include <linux/bootmem.h> -#include <asm/processor.h> #include <asm/i387.h> #include <asm/msr.h> #include <asm/io.h> +#include <asm/linkage.h> #include <asm/mmu_context.h> #include <asm/mtrr.h> #include <asm/mce.h> #include <asm/pat.h> #include <asm/asm.h> +#include <asm/numa.h> #ifdef CONFIG_X86_LOCAL_APIC #include <asm/mpspec.h> #include <asm/apic.h> #include <mach_apic.h> +#include <asm/genapic.h> #endif +#include <asm/pda.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/desc.h> +#include <asm/atomic.h> +#include <asm/proto.h> +#include <asm/sections.h> +#include <asm/setup.h> + #include "cpu.h" +static struct cpu_dev *this_cpu __cpuinitdata; + +#ifdef CONFIG_X86_64 +/* We need valid kernel segments for data and code in long mode too + * IRET will check the segment types kkeil 2000/10/28 + * Also sysret mandates a special GDT layout + */ +/* The TLS descriptors are currently at a different place compared to i386. + Hopefully nobody expects them at a fixed place (Wine?) */ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { + [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, + [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, + [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, + [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, + [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, + [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, +} }; +#else +DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, @@ -56,17 +90,150 @@ DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, } }; +#endif EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - +#ifdef CONFIG_X86_32 static int cachesize_override __cpuinitdata = -1; static int disable_x86_serial_nr __cpuinitdata = 1; -struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; +static int __init cachesize_setup(char *str) +{ + get_option(&str, &cachesize_override); + return 1; +} +__setup("cachesize=", cachesize_setup); + +static int __init x86_fxsr_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_FXSR); + setup_clear_cpu_cap(X86_FEATURE_XMM); + return 1; +} +__setup("nofxsr", x86_fxsr_setup); + +static int __init x86_sep_setup(char *s) +{ + setup_clear_cpu_cap(X86_FEATURE_SEP); + return 1; +} +__setup("nosep", x86_sep_setup); + +/* Standard macro to see if a specific flag is changeable */ +static inline int flag_is_changeable_p(u32 flag) +{ + u32 f1, f2; + + asm("pushfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "movl %0,%1\n\t" + "xorl %2,%0\n\t" + "pushl %0\n\t" + "popfl\n\t" + "pushfl\n\t" + "popl %0\n\t" + "popfl\n\t" + : "=&r" (f1), "=&r" (f2) + : "ir" (flag)); + + return ((f1^f2) & flag) != 0; +} + +/* Probe for the CPUID instruction */ +static int __cpuinit have_cpuid_p(void) +{ + return flag_is_changeable_p(X86_EFLAGS_ID); +} + +static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ + if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { + /* Disable processor serial number */ + unsigned long lo, hi; + rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + lo |= 0x200000; + wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); + printk(KERN_NOTICE "CPU serial number disabled.\n"); + clear_cpu_cap(c, X86_FEATURE_PN); + + /* Disabling the serial number may affect the cpuid level */ + c->cpuid_level = cpuid_eax(0); + } +} + +static int __init x86_serial_nr_setup(char *s) +{ + disable_x86_serial_nr = 0; + return 1; +} +__setup("serialnumber", x86_serial_nr_setup); +#else +static inline int flag_is_changeable_p(u32 flag) +{ + return 1; +} +/* Probe for the CPUID instruction */ +static inline int have_cpuid_p(void) +{ + return 1; +} +static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) +{ +} +#endif + +/* + * Naming convention should be: <Name> [(<Codename>)] + * This table only is used unless init_<vendor>() below doesn't set it; + * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used + * + */ + +/* Look up CPU names by table lookup. */ +static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +{ + struct cpu_model_info *info; + + if (c->x86_model >= 16) + return NULL; /* Range check */ + + if (!this_cpu) + return NULL; + + info = this_cpu->c_models; + + while (info && info->family) { + if (info->family == c->x86) + return info->model_names[c->x86_model]; + info++; + } + return NULL; /* Not found */ +} + +__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; + +/* Current gdt points %fs at the "master" per-cpu area: after this, + * it's on the real one. */ +void switch_to_new_gdt(void) +{ + struct desc_ptr gdt_descr; + + gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.size = GDT_SIZE - 1; + load_gdt(&gdt_descr); +#ifdef CONFIG_X86_32 + asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); +#endif +} + +static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; static void __cpuinit default_init(struct cpuinfo_x86 *c) { +#ifdef CONFIG_X86_64 + display_cacheinfo(c); +#else /* Not much we can do here... */ /* Check if at least it has cpuid */ if (c->cpuid_level == -1) { @@ -76,28 +243,22 @@ static void __cpuinit default_init(struct cpuinfo_x86 *c) else if (c->x86 == 3) strcpy(c->x86_model_id, "386"); } +#endif } static struct cpu_dev __cpuinitdata default_cpu = { .c_init = default_init, .c_vendor = "Unknown", + .c_x86_vendor = X86_VENDOR_UNKNOWN, }; -static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; -static int __init cachesize_setup(char *str) -{ - get_option(&str, &cachesize_override); - return 1; -} -__setup("cachesize=", cachesize_setup); - -int __cpuinit get_model_name(struct cpuinfo_x86 *c) +static void __cpuinit get_model_name(struct cpuinfo_x86 *c) { unsigned int *v; char *p, *q; - if (cpuid_eax(0x80000000) < 0x80000004) - return 0; + if (c->extended_cpuid_level < 0x80000004) + return; v = (unsigned int *) c->x86_model_id; cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); @@ -116,30 +277,34 @@ int __cpuinit get_model_name(struct cpuinfo_x86 *c) while (q <= &c->x86_model_id[48]) *q++ = '\0'; /* Zero-pad the rest */ } - - return 1; } - void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) { - unsigned int n, dummy, ecx, edx, l2size; + unsigned int n, dummy, ebx, ecx, edx, l2size; - n = cpuid_eax(0x80000000); + n = c->extended_cpuid_level; if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); + cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24)+(edx>>24); + edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); + c->x86_cache_size = (ecx>>24) + (edx>>24); +#ifdef CONFIG_X86_64 + /* On K8 L1 TLB is inclusive, so don't count it */ + c->x86_tlbsize = 0; +#endif } if (n < 0x80000006) /* Some chips just has a large L1. */ return; - ecx = cpuid_ecx(0x80000006); + cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); l2size = ecx >> 16; +#ifdef CONFIG_X86_64 + c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); +#else /* do processor-specific cache resizing */ if (this_cpu->c_size_cache) l2size = this_cpu->c_size_cache(c, l2size); @@ -150,116 +315,106 @@ void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) if (l2size == 0) return; /* Again, no L2 cache is possible */ +#endif c->x86_cache_size = l2size; printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - l2size, ecx & 0xFF); + l2size, ecx & 0xFF); } -/* - * Naming convention should be: <Name> [(<Codename>)] - * This table only is used unless init_<vendor>() below doesn't set it; - * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used - * - */ - -/* Look up CPU names by table lookup. */ -static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) +void __cpuinit detect_ht(struct cpuinfo_x86 *c) { - struct cpu_model_info *info; +#ifdef CONFIG_X86_HT + u32 eax, ebx, ecx, edx; + int index_msb, core_bits; - if (c->x86_model >= 16) - return NULL; /* Range check */ + if (!cpu_has(c, X86_FEATURE_HT)) + return; - if (!this_cpu) - return NULL; + if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) + goto out; - info = this_cpu->c_models; + if (cpu_has(c, X86_FEATURE_XTOPOLOGY)) + return; - while (info && info->family) { - if (info->family == c->x86) - return info->model_names[c->x86_model]; - info++; + cpuid(1, &eax, &ebx, &ecx, &edx); + + smp_num_siblings = (ebx & 0xff0000) >> 16; + + if (smp_num_siblings == 1) { + printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); + } else if (smp_num_siblings > 1) { + + if (smp_num_siblings > NR_CPUS) { + printk(KERN_WARNING "CPU: Unsupported number of siblings %d", + smp_num_siblings); + smp_num_siblings = 1; + return; + } + + index_msb = get_count_order(smp_num_siblings); +#ifdef CONFIG_X86_64 + c->phys_proc_id = phys_pkg_id(index_msb); +#else + c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); +#endif + + smp_num_siblings = smp_num_siblings / c->x86_max_cores; + + index_msb = get_count_order(smp_num_siblings); + + core_bits = get_count_order(c->x86_max_cores); + +#ifdef CONFIG_X86_64 + c->cpu_core_id = phys_pkg_id(index_msb) & + ((1 << core_bits) - 1); +#else + c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & + ((1 << core_bits) - 1); +#endif } - return NULL; /* Not found */ -} +out: + if ((c->x86_max_cores * smp_num_siblings) > 1) { + printk(KERN_INFO "CPU: Physical Processor ID: %d\n", + c->phys_proc_id); + printk(KERN_INFO "CPU: Processor Core ID: %d\n", + c->cpu_core_id); + } +#endif +} -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) +static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) { char *v = c->x86_vendor_id; int i; static int printed; for (i = 0; i < X86_VENDOR_NUM; i++) { - if (cpu_devs[i]) { - if (!strcmp(v, cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v, cpu_devs[i]->c_ident[1]))) { - c->x86_vendor = i; - if (!early) - this_cpu = cpu_devs[i]; - return; - } + if (!cpu_devs[i]) + break; + + if (!strcmp(v, cpu_devs[i]->c_ident[0]) || + (cpu_devs[i]->c_ident[1] && + !strcmp(v, cpu_devs[i]->c_ident[1]))) { + this_cpu = cpu_devs[i]; + c->x86_vendor = this_cpu->c_x86_vendor; + return; } } + if (!printed) { printed++; - printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); + printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v); printk(KERN_ERR "CPU: Your system may be unstable.\n"); } + c->x86_vendor = X86_VENDOR_UNKNOWN; this_cpu = &default_cpu; } - -static int __init x86_fxsr_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_FXSR); - setup_clear_cpu_cap(X86_FEATURE_XMM); - return 1; -} -__setup("nofxsr", x86_fxsr_setup); - - -static int __init x86_sep_setup(char *s) -{ - setup_clear_cpu_cap(X86_FEATURE_SEP); - return 1; -} -__setup("nosep", x86_sep_setup); - - -/* Standard macro to see if a specific flag is changeable */ -static inline int flag_is_changeable_p(u32 flag) -{ - u32 f1, f2; - - asm("pushfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "movl %0,%1\n\t" - "xorl %2,%0\n\t" - "pushl %0\n\t" - "popfl\n\t" - "pushfl\n\t" - "popl %0\n\t" - "popfl\n\t" - : "=&r" (f1), "=&r" (f2) - : "ir" (flag)); - - return ((f1^f2) & flag) != 0; -} - - -/* Probe for the CPUID instruction */ -static int __cpuinit have_cpuid_p(void) -{ - return flag_is_changeable_p(X86_EFLAGS_ID); -} - -void __init cpu_detect(struct cpuinfo_x86 *c) +void __cpuinit cpu_detect(struct cpuinfo_x86 *c) { /* Get vendor name */ cpuid(0x00000000, (unsigned int *)&c->cpuid_level, @@ -268,50 +423,87 @@ void __init cpu_detect(struct cpuinfo_x86 *c) (unsigned int *)&c->x86_vendor_id[4]); c->x86 = 4; + /* Intel-defined flags: level 0x00000001 */ if (c->cpuid_level >= 0x00000001) { u32 junk, tfms, cap0, misc; cpuid(0x00000001, &tfms, &misc, &junk, &cap0); - c->x86 = (tfms >> 8) & 15; - c->x86_model = (tfms >> 4) & 15; + c->x86 = (tfms >> 8) & 0xf; + c->x86_model = (tfms >> 4) & 0xf; + c->x86_mask = tfms & 0xf; if (c->x86 == 0xf) c->x86 += (tfms >> 20) & 0xff; if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - c->x86_mask = tfms & 15; + c->x86_model += ((tfms >> 16) & 0xf) << 4; if (cap0 & (1<<19)) { - c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; + c->x86_cache_alignment = c->x86_clflush_size; } } } -static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) + +static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c) { u32 tfms, xlvl; - unsigned int ebx; + u32 ebx; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - if (have_cpuid_p()) { - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - } + /* Intel-defined flags: level 0x00000001 */ + if (c->cpuid_level >= 0x00000001) { + u32 capability, excap; + cpuid(0x00000001, &tfms, &ebx, &excap, &capability); + c->x86_capability[0] = capability; + c->x86_capability[4] = excap; + } - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } + /* AMD-defined flags: level 0x80000001 */ + xlvl = cpuid_eax(0x80000000); + c->extended_cpuid_level = xlvl; + if ((xlvl & 0xffff0000) == 0x80000000) { + if (xlvl >= 0x80000001) { + c->x86_capability[1] = cpuid_edx(0x80000001); + c->x86_capability[6] = cpuid_ecx(0x80000001); } + } + +#ifdef CONFIG_X86_64 + if (c->extended_cpuid_level >= 0x80000008) { + u32 eax = cpuid_eax(0x80000008); + c->x86_virt_bits = (eax >> 8) & 0xff; + c->x86_phys_bits = eax & 0xff; } +#endif + + if (c->extended_cpuid_level >= 0x80000007) + c->x86_power = cpuid_edx(0x80000007); } +static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_X86_32 + int i; + + /* + * First of all, decide if this is a 486 or higher + * It's a 486 if we can modify the AC flag + */ + if (flag_is_changeable_p(X86_EFLAGS_AC)) + c->x86 = 4; + else + c->x86 = 3; + + for (i = 0; i < X86_VENDOR_NUM; i++) + if (cpu_devs[i] && cpu_devs[i]->c_identify) { + c->x86_vendor_id[0] = 0; + cpu_devs[i]->c_identify(c); + if (c->x86_vendor_id[0]) { + get_cpu_vendor(c); + break; + } + } +#endif +} + /* * Do minimum CPU detection early. * Fields really needed: vendor, cpuid_level, family, model, mask, @@ -321,138 +513,113 @@ static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) * WARNING: this function is only called on the BP. Don't add code here * that is supposed to run on all CPUs. */ -static void __init early_cpu_detect(void) +static void __init early_identify_cpu(struct cpuinfo_x86 *c) { - struct cpuinfo_x86 *c = &boot_cpu_data; - - c->x86_cache_alignment = 32; +#ifdef CONFIG_X86_64 + c->x86_clflush_size = 64; +#else c->x86_clflush_size = 32; +#endif + c->x86_cache_alignment = c->x86_clflush_size; + memset(&c->x86_capability, 0, sizeof c->x86_capability); + c->extended_cpuid_level = 0; + + if (!have_cpuid_p()) + identify_cpu_without_cpuid(c); + + /* cyrix could have cpuid enabled via c_identify()*/ if (!have_cpuid_p()) return; cpu_detect(c); - get_cpu_vendor(c, 1); + get_cpu_vendor(c); - if (c->x86_vendor != X86_VENDOR_UNKNOWN && - cpu_devs[c->x86_vendor]->c_early_init) - cpu_devs[c->x86_vendor]->c_early_init(c); + get_cpu_cap(c); - early_get_cap(c); + if (this_cpu->c_early_init) + this_cpu->c_early_init(c); + + validate_pat_support(c); +} + +void __init early_cpu_init(void) +{ + struct cpu_dev **cdev; + int count = 0; + + printk("KERNEL supported cpus:\n"); + for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) { + struct cpu_dev *cpudev = *cdev; + unsigned int j; + + if (count >= X86_VENDOR_NUM) + break; + cpu_devs[count] = cpudev; + count++; + + for (j = 0; j < 2; j++) { + if (!cpudev->c_ident[j]) + continue; + printk(" %s %s\n", cpudev->c_vendor, + cpudev->c_ident[j]); + } + } + + early_identify_cpu(&boot_cpu_data); } /* * The NOPL instruction is supposed to exist on all CPUs with - * family >= 6, unfortunately, that's not true in practice because + * family >= 6; unfortunately, that's not true in practice because * of early VIA chips and (more importantly) broken virtualizers that - * are not easy to detect. Hence, probe for it based on first - * principles. + * are not easy to detect. In the latter case it doesn't even *fail* + * reliably, so probing for it doesn't even work. Disable it completely + * unless we can find a reliable way to detect all the broken cases. */ static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) { - const u32 nopl_signature = 0x888c53b1; /* Random number */ - u32 has_nopl = nopl_signature; - clear_cpu_cap(c, X86_FEATURE_NOPL); - if (c->x86 >= 6) { - asm volatile("\n" - "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ - "2:\n" - " .section .fixup,\"ax\"\n" - "3: xor %0,%0\n" - " jmp 2b\n" - " .previous\n" - _ASM_EXTABLE(1b,3b) - : "+a" (has_nopl)); - - if (has_nopl == nopl_signature) - set_cpu_cap(c, X86_FEATURE_NOPL); - } } static void __cpuinit generic_identify(struct cpuinfo_x86 *c) { - u32 tfms, xlvl; - unsigned int ebx; - - if (have_cpuid_p()) { - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c, 0); - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - u32 capability, excap; - cpuid(0x00000001, &tfms, &ebx, &excap, &capability); - c->x86_capability[0] = capability; - c->x86_capability[4] = excap; - c->x86 = (tfms >> 8) & 15; - c->x86_model = (tfms >> 4) & 15; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - c->x86_mask = tfms & 15; - c->initial_apicid = (ebx >> 24) & 0xFF; -#ifdef CONFIG_X86_HT - c->apicid = phys_pkg_id(c->initial_apicid, 0); - c->phys_proc_id = c->initial_apicid; -#else - c->apicid = c->initial_apicid; -#endif - if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) - c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } + c->extended_cpuid_level = 0; - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ - } + if (!have_cpuid_p()) + identify_cpu_without_cpuid(c); - init_scattered_cpuid_features(c); - detect_nopl(c); - } -} + /* cyrix could have cpuid enabled via c_identify()*/ + if (!have_cpuid_p()) + return; -static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) -{ - if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { - /* Disable processor serial number */ - unsigned long lo, hi; - rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - lo |= 0x200000; - wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); - printk(KERN_NOTICE "CPU serial number disabled.\n"); - clear_cpu_cap(c, X86_FEATURE_PN); + cpu_detect(c); - /* Disabling the serial number may affect the cpuid level */ - c->cpuid_level = cpuid_eax(0); - } -} + get_cpu_vendor(c); -static int __init x86_serial_nr_setup(char *s) -{ - disable_x86_serial_nr = 0; - return 1; -} -__setup("serialnumber", x86_serial_nr_setup); + get_cpu_cap(c); + + if (c->cpuid_level >= 0x00000001) { + c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF; +#ifdef CONFIG_X86_32 +# ifdef CONFIG_X86_HT + c->apicid = phys_pkg_id(c->initial_apicid, 0); +# else + c->apicid = c->initial_apicid; +# endif +#endif +#ifdef CONFIG_X86_HT + c->phys_proc_id = c->initial_apicid; +#endif + } + get_model_name(c); /* Default name */ + + init_scattered_cpuid_features(c); + detect_nopl(c); +} /* * This does the hard work of actually picking apart the CPU stuff... @@ -464,30 +631,29 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->loops_per_jiffy = loops_per_jiffy; c->x86_cache_size = -1; c->x86_vendor = X86_VENDOR_UNKNOWN; - c->cpuid_level = -1; /* CPUID not detected */ c->x86_model = c->x86_mask = 0; /* So far unknown... */ c->x86_vendor_id[0] = '\0'; /* Unset */ c->x86_model_id[0] = '\0'; /* Unset */ c->x86_max_cores = 1; + c->x86_coreid_bits = 0; +#ifdef CONFIG_X86_64 + c->x86_clflush_size = 64; +#else + c->cpuid_level = -1; /* CPUID not detected */ c->x86_clflush_size = 32; +#endif + c->x86_cache_alignment = c->x86_clflush_size; memset(&c->x86_capability, 0, sizeof c->x86_capability); - if (!have_cpuid_p()) { - /* - * First of all, decide if this is a 486 or higher - * It's a 486 if we can modify the AC flag - */ - if (flag_is_changeable_p(X86_EFLAGS_AC)) - c->x86 = 4; - else - c->x86 = 3; - } - generic_identify(c); if (this_cpu->c_identify) this_cpu->c_identify(c); +#ifdef CONFIG_X86_64 + c->apicid = phys_pkg_id(0); +#endif + /* * Vendor-specific initialization. In this section we * canonicalize the feature flags, meaning if there are @@ -521,6 +687,10 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) c->x86, c->x86_model); } +#ifdef CONFIG_X86_64 + detect_ht(c); +#endif + /* * On SMP, boot_cpu_data holds the common feature set between * all CPUs; so make sure that we indicate which features are @@ -529,7 +699,7 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) */ if (c != &boot_cpu_data) { /* AND the already accumulated flags with these */ - for (i = 0 ; i < NCAPINTS ; i++) + for (i = 0; i < NCAPINTS; i++) boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; } @@ -537,72 +707,79 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) for (i = 0; i < NCAPINTS; i++) c->x86_capability[i] &= ~cleared_cpu_caps[i]; +#ifdef CONFIG_X86_MCE /* Init Machine Check Exception if available. */ mcheck_init(c); +#endif select_idle_routine(c); + +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + numa_add_cpu(smp_processor_id()); +#endif } void __init identify_boot_cpu(void) { identify_cpu(&boot_cpu_data); +#ifdef CONFIG_X86_32 sysenter_setup(); enable_sep_cpu(); +#endif } void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) { BUG_ON(c == &boot_cpu_data); identify_cpu(c); +#ifdef CONFIG_X86_32 enable_sep_cpu(); +#endif mtrr_ap_init(); } -#ifdef CONFIG_X86_HT -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) - return; - - smp_num_siblings = (ebx & 0xff0000) >> 16; +struct msr_range { + unsigned min; + unsigned max; +}; - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { +static struct msr_range msr_range_array[] __cpuinitdata = { + { 0x00000000, 0x00000418}, + { 0xc0000000, 0xc000040b}, + { 0xc0010000, 0xc0010142}, + { 0xc0011000, 0xc001103b}, +}; - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of the " - "siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; +static void __cpuinit print_cpu_msr(void) +{ + unsigned index; + u64 val; + int i; + unsigned index_min, index_max; + + for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) { + index_min = msr_range_array[i].min; + index_max = msr_range_array[i].max; + for (index = index_min; index < index_max; index++) { + if (rdmsrl_amd_safe(index, &val)) + continue; + printk(KERN_INFO " MSR%08x: %016llx\n", index, val); } + } +} - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); - - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings) ; - - core_bits = get_count_order(c->x86_max_cores); +static int show_msr __cpuinitdata; +static __init int setup_show_msr(char *arg) +{ + int num; - c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & - ((1 << core_bits) - 1); + get_option(&arg, &num); - if (c->x86_max_cores > 1) - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } + if (num > 0) + show_msr = num; + return 1; } -#endif +__setup("show_msr=", setup_show_msr); static __init int setup_noclflush(char *arg) { @@ -621,17 +798,25 @@ void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) vendor = c->x86_vendor_id; if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) - printk("%s ", vendor); + printk(KERN_CONT "%s ", vendor); - if (!c->x86_model_id[0]) - printk("%d86", c->x86); + if (c->x86_model_id[0]) + printk(KERN_CONT "%s", c->x86_model_id); else - printk("%s", c->x86_model_id); + printk(KERN_CONT "%d86", c->x86); if (c->x86_mask || c->cpuid_level >= 0) - printk(" stepping %02x\n", c->x86_mask); + printk(KERN_CONT " stepping %02x\n", c->x86_mask); else - printk("\n"); + printk(KERN_CONT "\n"); + +#ifdef CONFIG_SMP + if (c->cpu_index < show_msr) + print_cpu_msr(); +#else + if (show_msr) + print_cpu_msr(); +#endif } static __init int setup_disablecpuid(char *arg) @@ -647,19 +832,89 @@ __setup("clearcpuid=", setup_disablecpuid); cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; -void __init early_cpu_init(void) +#ifdef CONFIG_X86_64 +struct x8664_pda **_cpu_pda __read_mostly; +EXPORT_SYMBOL(_cpu_pda); + +struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; + +char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; + +void __cpuinit pda_init(int cpu) +{ + struct x8664_pda *pda = cpu_pda(cpu); + + /* Setup up data that may be needed in __get_free_pages early */ + loadsegment(fs, 0); + loadsegment(gs, 0); + /* Memory clobbers used to order PDA accessed */ + mb(); + wrmsrl(MSR_GS_BASE, pda); + mb(); + + pda->cpunumber = cpu; + pda->irqcount = -1; + pda->kernelstack = (unsigned long)stack_thread_info() - + PDA_STACKOFFSET + THREAD_SIZE; + pda->active_mm = &init_mm; + pda->mmu_state = 0; + + if (cpu == 0) { + /* others are initialized in smpboot.c */ + pda->pcurrent = &init_task; + pda->irqstackptr = boot_cpu_stack; + pda->irqstackptr += IRQSTACKSIZE - 64; + } else { + if (!pda->irqstackptr) { + pda->irqstackptr = (char *) + __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); + if (!pda->irqstackptr) + panic("cannot allocate irqstack for cpu %d", + cpu); + pda->irqstackptr += IRQSTACKSIZE - 64; + } + + if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) + pda->nodenumber = cpu_to_node(cpu); + } +} + +char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + + DEBUG_STKSZ] __page_aligned_bss; + +extern asmlinkage void ignore_sysret(void); + +/* May not be marked __init: used by software suspend */ +void syscall_init(void) { - struct cpu_vendor_dev *cvdev; + /* + * LSTAR and STAR live in a bit strange symbiosis. + * They both write to the same internal register. STAR allows to + * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. + */ + wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); + wrmsrl(MSR_LSTAR, system_call); + wrmsrl(MSR_CSTAR, ignore_sysret); - for (cvdev = __x86cpuvendor_start ; - cvdev < __x86cpuvendor_end ; - cvdev++) - cpu_devs[cvdev->vendor] = cvdev->cpu_dev; +#ifdef CONFIG_IA32_EMULATION + syscall32_cpu_init(); +#endif - early_cpu_detect(); - validate_pat_support(&boot_cpu_data); + /* Flags to clear on syscall */ + wrmsrl(MSR_SYSCALL_MASK, + X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); } +unsigned long kernel_eflags; + +/* + * Copies of the original ist values from the tss are only accessed during + * debugging, no special alignment required. + */ +DEFINE_PER_CPU(struct orig_ist, orig_ist); + +#else + /* Make sure %fs is initialized properly in idle threads */ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) { @@ -667,25 +922,136 @@ struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) regs->fs = __KERNEL_PERCPU; return regs; } - -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ -void switch_to_new_gdt(void) -{ - struct desc_ptr gdt_descr; - - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); - asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); -} +#endif /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT * and IDT. We reload them nevertheless, this function acts as a * 'CPU state barrier', nothing should get across. + * A lot of state is already set up in PDA init for 64 bit */ +#ifdef CONFIG_X86_64 +void __cpuinit cpu_init(void) +{ + int cpu = stack_smp_processor_id(); + struct tss_struct *t = &per_cpu(init_tss, cpu); + struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); + unsigned long v; + char *estacks = NULL; + struct task_struct *me; + int i; + + /* CPU 0 is initialised in head64.c */ + if (cpu != 0) + pda_init(cpu); + else + estacks = boot_exception_stacks; + + me = current; + + if (cpu_test_and_set(cpu, cpu_initialized)) + panic("CPU#%d already initialized!\n", cpu); + + printk(KERN_INFO "Initializing CPU#%d\n", cpu); + + clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); + + /* + * Initialize the per-CPU GDT with the boot GDT, + * and set up the GDT descriptor: + */ + + switch_to_new_gdt(); + load_idt((const struct desc_ptr *)&idt_descr); + + memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); + syscall_init(); + + wrmsrl(MSR_FS_BASE, 0); + wrmsrl(MSR_KERNEL_GS_BASE, 0); + barrier(); + + check_efer(); + if (cpu != 0 && x2apic) + enable_x2apic(); + + /* + * set up and load the per-CPU TSS + */ + if (!orig_ist->ist[0]) { + static const unsigned int order[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, + [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + }; + for (v = 0; v < N_EXCEPTION_STACKS; v++) { + if (cpu) { + estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); + if (!estacks) + panic("Cannot allocate exception " + "stack %ld %d\n", v, cpu); + } + estacks += PAGE_SIZE << order[v]; + orig_ist->ist[v] = t->x86_tss.ist[v] = + (unsigned long)estacks; + } + } + + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + /* + * <= is required because the CPU will access up to + * 8 bits beyond the end of the IO permission bitmap. + */ + for (i = 0; i <= IO_BITMAP_LONGS; i++) + t->io_bitmap[i] = ~0UL; + + atomic_inc(&init_mm.mm_count); + me->active_mm = &init_mm; + if (me->mm) + BUG(); + enter_lazy_tlb(&init_mm, me); + + load_sp0(t, ¤t->thread); + set_tss_desc(cpu, t); + load_TR_desc(); + load_LDT(&init_mm.context); + +#ifdef CONFIG_KGDB + /* + * If the kgdb is connected no debug regs should be altered. This + * is only applicable when KGDB and a KGDB I/O module are built + * into the kernel and you are using early debugging with + * kgdbwait. KGDB will control the kernel HW breakpoint registers. + */ + if (kgdb_connected && arch_kgdb_ops.correct_hw_break) + arch_kgdb_ops.correct_hw_break(); + else { +#endif + /* + * Clear all 6 debug registers: + */ + + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); +#ifdef CONFIG_KGDB + /* If the kgdb is connected no debug regs should be altered. */ + } +#endif + + fpu_init(); + + raw_local_save_flags(kernel_eflags); + + if (is_uv_system()) + uv_cpu_init(); +} + +#else + void __cpuinit cpu_init(void) { int cpu = smp_processor_id(); @@ -766,3 +1132,5 @@ void __cpuinit cpu_uninit(void) per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; } #endif + +#endif diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c deleted file mode 100644 index af569a964e74..000000000000 --- a/arch/x86/kernel/cpu/common_64.c +++ /dev/null @@ -1,708 +0,0 @@ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/bitops.h> -#include <linux/module.h> -#include <linux/kgdb.h> -#include <linux/topology.h> -#include <linux/delay.h> -#include <linux/smp.h> -#include <linux/percpu.h> -#include <asm/i387.h> -#include <asm/msr.h> -#include <asm/io.h> -#include <asm/linkage.h> -#include <asm/mmu_context.h> -#include <asm/mtrr.h> -#include <asm/mce.h> -#include <asm/pat.h> -#include <asm/asm.h> -#include <asm/numa.h> -#ifdef CONFIG_X86_LOCAL_APIC -#include <asm/mpspec.h> -#include <asm/apic.h> -#include <mach_apic.h> -#endif -#include <asm/pda.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/desc.h> -#include <asm/atomic.h> -#include <asm/proto.h> -#include <asm/sections.h> -#include <asm/setup.h> -#include <asm/genapic.h> - -#include "cpu.h" - -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ -DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { - [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, - [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, - [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, - [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, - [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, - [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, -} }; -EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); - -__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; - -/* Current gdt points %fs at the "master" per-cpu area: after this, - * it's on the real one. */ -void switch_to_new_gdt(void) -{ - struct desc_ptr gdt_descr; - - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); - gdt_descr.size = GDT_SIZE - 1; - load_gdt(&gdt_descr); -} - -struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; - -static void __cpuinit default_init(struct cpuinfo_x86 *c) -{ - display_cacheinfo(c); -} - -static struct cpu_dev __cpuinitdata default_cpu = { - .c_init = default_init, - .c_vendor = "Unknown", -}; -static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; - -int __cpuinit get_model_name(struct cpuinfo_x86 *c) -{ - unsigned int *v; - - if (c->extended_cpuid_level < 0x80000004) - return 0; - - v = (unsigned int *) c->x86_model_id; - cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); - cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); - cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); - c->x86_model_id[48] = 0; - return 1; -} - - -void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) -{ - unsigned int n, dummy, ebx, ecx, edx; - - n = c->extended_cpuid_level; - - if (n >= 0x80000005) { - cpuid(0x80000005, &dummy, &ebx, &ecx, &edx); - printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), " - "D cache %dK (%d bytes/line)\n", - edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); - c->x86_cache_size = (ecx>>24) + (edx>>24); - /* On K8 L1 TLB is inclusive, so don't count it */ - c->x86_tlbsize = 0; - } - - if (n >= 0x80000006) { - cpuid(0x80000006, &dummy, &ebx, &ecx, &edx); - ecx = cpuid_ecx(0x80000006); - c->x86_cache_size = ecx >> 16; - c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff); - - printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", - c->x86_cache_size, ecx & 0xFF); - } -} - -void __cpuinit detect_ht(struct cpuinfo_x86 *c) -{ -#ifdef CONFIG_SMP - u32 eax, ebx, ecx, edx; - int index_msb, core_bits; - - cpuid(1, &eax, &ebx, &ecx, &edx); - - - if (!cpu_has(c, X86_FEATURE_HT)) - return; - if (cpu_has(c, X86_FEATURE_CMP_LEGACY)) - goto out; - - smp_num_siblings = (ebx & 0xff0000) >> 16; - - if (smp_num_siblings == 1) { - printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); - } else if (smp_num_siblings > 1) { - - if (smp_num_siblings > NR_CPUS) { - printk(KERN_WARNING "CPU: Unsupported number of " - "siblings %d", smp_num_siblings); - smp_num_siblings = 1; - return; - } - - index_msb = get_count_order(smp_num_siblings); - c->phys_proc_id = phys_pkg_id(index_msb); - - smp_num_siblings = smp_num_siblings / c->x86_max_cores; - - index_msb = get_count_order(smp_num_siblings); - - core_bits = get_count_order(c->x86_max_cores); - - c->cpu_core_id = phys_pkg_id(index_msb) & - ((1 << core_bits) - 1); - } -out: - if ((c->x86_max_cores * smp_num_siblings) > 1) { - printk(KERN_INFO "CPU: Physical Processor ID: %d\n", - c->phys_proc_id); - printk(KERN_INFO "CPU: Processor Core ID: %d\n", - c->cpu_core_id); - } - -#endif -} - -static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c) -{ - char *v = c->x86_vendor_id; - int i; - static int printed; - - for (i = 0; i < X86_VENDOR_NUM; i++) { - if (cpu_devs[i]) { - if (!strcmp(v, cpu_devs[i]->c_ident[0]) || - (cpu_devs[i]->c_ident[1] && - !strcmp(v, cpu_devs[i]->c_ident[1]))) { - c->x86_vendor = i; - this_cpu = cpu_devs[i]; - return; - } - } - } - if (!printed) { - printed++; - printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); - printk(KERN_ERR "CPU: Your system may be unstable.\n"); - } - c->x86_vendor = X86_VENDOR_UNKNOWN; -} - -static void __init early_cpu_support_print(void) -{ - int i,j; - struct cpu_dev *cpu_devx; - - printk("KERNEL supported cpus:\n"); - for (i = 0; i < X86_VENDOR_NUM; i++) { - cpu_devx = cpu_devs[i]; - if (!cpu_devx) - continue; - for (j = 0; j < 2; j++) { - if (!cpu_devx->c_ident[j]) - continue; - printk(" %s %s\n", cpu_devx->c_vendor, - cpu_devx->c_ident[j]); - } - } -} - -/* - * The NOPL instruction is supposed to exist on all CPUs with - * family >= 6, unfortunately, that's not true in practice because - * of early VIA chips and (more importantly) broken virtualizers that - * are not easy to detect. Hence, probe for it based on first - * principles. - * - * Note: no 64-bit chip is known to lack these, but put the code here - * for consistency with 32 bits, and to make it utterly trivial to - * diagnose the problem should it ever surface. - */ -static void __cpuinit detect_nopl(struct cpuinfo_x86 *c) -{ - const u32 nopl_signature = 0x888c53b1; /* Random number */ - u32 has_nopl = nopl_signature; - - clear_cpu_cap(c, X86_FEATURE_NOPL); - if (c->x86 >= 6) { - asm volatile("\n" - "1: .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */ - "2:\n" - " .section .fixup,\"ax\"\n" - "3: xor %0,%0\n" - " jmp 2b\n" - " .previous\n" - _ASM_EXTABLE(1b,3b) - : "+a" (has_nopl)); - - if (has_nopl == nopl_signature) - set_cpu_cap(c, X86_FEATURE_NOPL); - } -} - -static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c); - -void __init early_cpu_init(void) -{ - struct cpu_vendor_dev *cvdev; - - for (cvdev = __x86cpuvendor_start ; - cvdev < __x86cpuvendor_end ; - cvdev++) - cpu_devs[cvdev->vendor] = cvdev->cpu_dev; - early_cpu_support_print(); - early_identify_cpu(&boot_cpu_data); -} - -/* Do some early cpuid on the boot CPU to get some parameter that are - needed before check_bugs. Everything advanced is in identify_cpu - below. */ -static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c) -{ - u32 tfms, xlvl; - - c->loops_per_jiffy = loops_per_jiffy; - c->x86_cache_size = -1; - c->x86_vendor = X86_VENDOR_UNKNOWN; - c->x86_model = c->x86_mask = 0; /* So far unknown... */ - c->x86_vendor_id[0] = '\0'; /* Unset */ - c->x86_model_id[0] = '\0'; /* Unset */ - c->x86_clflush_size = 64; - c->x86_cache_alignment = c->x86_clflush_size; - c->x86_max_cores = 1; - c->x86_coreid_bits = 0; - c->extended_cpuid_level = 0; - memset(&c->x86_capability, 0, sizeof c->x86_capability); - - /* Get vendor name */ - cpuid(0x00000000, (unsigned int *)&c->cpuid_level, - (unsigned int *)&c->x86_vendor_id[0], - (unsigned int *)&c->x86_vendor_id[8], - (unsigned int *)&c->x86_vendor_id[4]); - - get_cpu_vendor(c); - - /* Initialize the standard set of capabilities */ - /* Note that the vendor-specific code below might override */ - - /* Intel-defined flags: level 0x00000001 */ - if (c->cpuid_level >= 0x00000001) { - __u32 misc; - cpuid(0x00000001, &tfms, &misc, &c->x86_capability[4], - &c->x86_capability[0]); - c->x86 = (tfms >> 8) & 0xf; - c->x86_model = (tfms >> 4) & 0xf; - c->x86_mask = tfms & 0xf; - if (c->x86 == 0xf) - c->x86 += (tfms >> 20) & 0xff; - if (c->x86 >= 0x6) - c->x86_model += ((tfms >> 16) & 0xF) << 4; - if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) - c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; - } else { - /* Have CPUID level 0 only - unheard of */ - c->x86 = 4; - } - - c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xff; -#ifdef CONFIG_SMP - c->phys_proc_id = c->initial_apicid; -#endif - /* AMD-defined flags: level 0x80000001 */ - xlvl = cpuid_eax(0x80000000); - c->extended_cpuid_level = xlvl; - if ((xlvl & 0xffff0000) == 0x80000000) { - if (xlvl >= 0x80000001) { - c->x86_capability[1] = cpuid_edx(0x80000001); - c->x86_capability[6] = cpuid_ecx(0x80000001); - } - if (xlvl >= 0x80000004) - get_model_name(c); /* Default name */ - } - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - /* Don't set x86_cpuid_level here for now to not confuse. */ - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } - - if (c->extended_cpuid_level >= 0x80000007) - c->x86_power = cpuid_edx(0x80000007); - - if (c->extended_cpuid_level >= 0x80000008) { - u32 eax = cpuid_eax(0x80000008); - - c->x86_virt_bits = (eax >> 8) & 0xff; - c->x86_phys_bits = eax & 0xff; - } - - detect_nopl(c); - - if (c->x86_vendor != X86_VENDOR_UNKNOWN && - cpu_devs[c->x86_vendor]->c_early_init) - cpu_devs[c->x86_vendor]->c_early_init(c); - - validate_pat_support(c); -} - -/* - * This does the hard work of actually picking apart the CPU stuff... - */ -static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) -{ - int i; - - early_identify_cpu(c); - - init_scattered_cpuid_features(c); - - c->apicid = phys_pkg_id(0); - - /* - * Vendor-specific initialization. In this section we - * canonicalize the feature flags, meaning if there are - * features a certain CPU supports which CPUID doesn't - * tell us, CPUID claiming incorrect flags, or other bugs, - * we handle them here. - * - * At the end of this section, c->x86_capability better - * indicate the features this CPU genuinely supports! - */ - if (this_cpu->c_init) - this_cpu->c_init(c); - - detect_ht(c); - - /* - * On SMP, boot_cpu_data holds the common feature set between - * all CPUs; so make sure that we indicate which features are - * common between the CPUs. The first time this routine gets - * executed, c == &boot_cpu_data. - */ - if (c != &boot_cpu_data) { - /* AND the already accumulated flags with these */ - for (i = 0; i < NCAPINTS; i++) - boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; - } - - /* Clear all flags overriden by options */ - for (i = 0; i < NCAPINTS; i++) - c->x86_capability[i] &= ~cleared_cpu_caps[i]; - -#ifdef CONFIG_X86_MCE - mcheck_init(c); -#endif - select_idle_routine(c); - -#ifdef CONFIG_NUMA - numa_add_cpu(smp_processor_id()); -#endif - -} - -void __cpuinit identify_boot_cpu(void) -{ - identify_cpu(&boot_cpu_data); -} - -void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) -{ - BUG_ON(c == &boot_cpu_data); - identify_cpu(c); - mtrr_ap_init(); -} - -static __init int setup_noclflush(char *arg) -{ - setup_clear_cpu_cap(X86_FEATURE_CLFLSH); - return 1; -} -__setup("noclflush", setup_noclflush); - -void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) -{ - if (c->x86_model_id[0]) - printk(KERN_CONT "%s", c->x86_model_id); - - if (c->x86_mask || c->cpuid_level >= 0) - printk(KERN_CONT " stepping %02x\n", c->x86_mask); - else - printk(KERN_CONT "\n"); -} - -static __init int setup_disablecpuid(char *arg) -{ - int bit; - if (get_option(&arg, &bit) && bit < NCAPINTS*32) - setup_clear_cpu_cap(bit); - else - return 0; - return 1; -} -__setup("clearcpuid=", setup_disablecpuid); - -cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; - -struct x8664_pda **_cpu_pda __read_mostly; -EXPORT_SYMBOL(_cpu_pda); - -struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; - -char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; - -unsigned long __supported_pte_mask __read_mostly = ~0UL; -EXPORT_SYMBOL_GPL(__supported_pte_mask); - -static int do_not_nx __cpuinitdata; - -/* noexec=on|off -Control non executable mappings for 64bit processes. - -on Enable(default) -off Disable -*/ -static int __init nonx_setup(char *str) -{ - if (!str) - return -EINVAL; - if (!strncmp(str, "on", 2)) { - __supported_pte_mask |= _PAGE_NX; - do_not_nx = 0; - } else if (!strncmp(str, "off", 3)) { - do_not_nx = 1; - __supported_pte_mask &= ~_PAGE_NX; - } - return 0; -} -early_param("noexec", nonx_setup); - -int force_personality32; - -/* noexec32=on|off -Control non executable heap for 32bit processes. -To control the stack too use noexec=off - -on PROT_READ does not imply PROT_EXEC for 32bit processes (default) -off PROT_READ implies PROT_EXEC -*/ -static int __init nonx32_setup(char *str) -{ - if (!strcmp(str, "on")) - force_personality32 &= ~READ_IMPLIES_EXEC; - else if (!strcmp(str, "off")) - force_personality32 |= READ_IMPLIES_EXEC; - return 1; -} -__setup("noexec32=", nonx32_setup); - -void pda_init(int cpu) -{ - struct x8664_pda *pda = cpu_pda(cpu); - - /* Setup up data that may be needed in __get_free_pages early */ - loadsegment(fs, 0); - loadsegment(gs, 0); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); - - pda->cpunumber = cpu; - pda->irqcount = -1; - pda->kernelstack = (unsigned long)stack_thread_info() - - PDA_STACKOFFSET + THREAD_SIZE; - pda->active_mm = &init_mm; - pda->mmu_state = 0; - - if (cpu == 0) { - /* others are initialized in smpboot.c */ - pda->pcurrent = &init_task; - pda->irqstackptr = boot_cpu_stack; - } else { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", cpu); - - if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) - pda->nodenumber = cpu_to_node(cpu); - } - - pda->irqstackptr += IRQSTACKSIZE-64; -} - -char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + - DEBUG_STKSZ] __page_aligned_bss; - -extern asmlinkage void ignore_sysret(void); - -/* May not be marked __init: used by software suspend */ -void syscall_init(void) -{ - /* - * LSTAR and STAR live in a bit strange symbiosis. - * They both write to the same internal register. STAR allows to - * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip. - */ - wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32); - wrmsrl(MSR_LSTAR, system_call); - wrmsrl(MSR_CSTAR, ignore_sysret); - -#ifdef CONFIG_IA32_EMULATION - syscall32_cpu_init(); -#endif - - /* Flags to clear on syscall */ - wrmsrl(MSR_SYSCALL_MASK, - X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL); -} - -void __cpuinit check_efer(void) -{ - unsigned long efer; - - rdmsrl(MSR_EFER, efer); - if (!(efer & EFER_NX) || do_not_nx) - __supported_pte_mask &= ~_PAGE_NX; -} - -unsigned long kernel_eflags; - -/* - * Copies of the original ist values from the tss are only accessed during - * debugging, no special alignment required. - */ -DEFINE_PER_CPU(struct orig_ist, orig_ist); - -/* - * cpu_init() initializes state that is per-CPU. Some data is already - * initialized (naturally) in the bootstrap process, such as the GDT - * and IDT. We reload them nevertheless, this function acts as a - * 'CPU state barrier', nothing should get across. - * A lot of state is already set up in PDA init. - */ -void __cpuinit cpu_init(void) -{ - int cpu = stack_smp_processor_id(); - struct tss_struct *t = &per_cpu(init_tss, cpu); - struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); - unsigned long v; - char *estacks = NULL; - struct task_struct *me; - int i; - - /* CPU 0 is initialised in head64.c */ - if (cpu != 0) - pda_init(cpu); - else - estacks = boot_exception_stacks; - - me = current; - - if (cpu_test_and_set(cpu, cpu_initialized)) - panic("CPU#%d already initialized!\n", cpu); - - printk(KERN_INFO "Initializing CPU#%d\n", cpu); - - clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); - - /* - * Initialize the per-CPU GDT with the boot GDT, - * and set up the GDT descriptor: - */ - - switch_to_new_gdt(); - load_idt((const struct desc_ptr *)&idt_descr); - - memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); - syscall_init(); - - wrmsrl(MSR_FS_BASE, 0); - wrmsrl(MSR_KERNEL_GS_BASE, 0); - barrier(); - - check_efer(); - if (cpu != 0 && x2apic) - enable_x2apic(); - - /* - * set up and load the per-CPU TSS - */ - for (v = 0; v < N_EXCEPTION_STACKS; v++) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER - }; - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception stack %ld %d\n", - v, cpu); - } - estacks += PAGE_SIZE << order[v]; - orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; - } - - t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); - /* - * <= is required because the CPU will access up to - * 8 bits beyond the end of the IO permission bitmap. - */ - for (i = 0; i <= IO_BITMAP_LONGS; i++) - t->io_bitmap[i] = ~0UL; - - atomic_inc(&init_mm.mm_count); - me->active_mm = &init_mm; - if (me->mm) - BUG(); - enter_lazy_tlb(&init_mm, me); - - load_sp0(t, ¤t->thread); - set_tss_desc(cpu, t); - load_TR_desc(); - load_LDT(&init_mm.context); - -#ifdef CONFIG_KGDB - /* - * If the kgdb is connected no debug regs should be altered. This - * is only applicable when KGDB and a KGDB I/O module are built - * into the kernel and you are using early debugging with - * kgdbwait. KGDB will control the kernel HW breakpoint registers. - */ - if (kgdb_connected && arch_kgdb_ops.correct_hw_break) - arch_kgdb_ops.correct_hw_break(); - else { -#endif - /* - * Clear all 6 debug registers: - */ - - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); -#ifdef CONFIG_KGDB - /* If the kgdb is connected no debug regs should be altered. */ - } -#endif - - fpu_init(); - - raw_local_save_flags(kernel_eflags); - - if (is_uv_system()) - uv_cpu_init(); -} diff --git a/arch/x86/kernel/cpu/cpu.h b/arch/x86/kernel/cpu/cpu.h index 4d894e8565fe..de4094a39210 100644 --- a/arch/x86/kernel/cpu/cpu.h +++ b/arch/x86/kernel/cpu/cpu.h @@ -21,23 +21,16 @@ struct cpu_dev { void (*c_init)(struct cpuinfo_x86 * c); void (*c_identify)(struct cpuinfo_x86 * c); unsigned int (*c_size_cache)(struct cpuinfo_x86 * c, unsigned int size); + int c_x86_vendor; }; -extern struct cpu_dev * cpu_devs [X86_VENDOR_NUM]; +#define cpu_dev_register(cpu_devX) \ + static struct cpu_dev *__cpu_dev_##cpu_devX __used \ + __attribute__((__section__(".x86_cpu_dev.init"))) = \ + &cpu_devX; -struct cpu_vendor_dev { - int vendor; - struct cpu_dev *cpu_dev; -}; - -#define cpu_vendor_dev_register(cpu_vendor_id, cpu_dev) \ - static struct cpu_vendor_dev __cpu_vendor_dev_##cpu_vendor_id __used \ - __attribute__((__section__(".x86cpuvendor.init"))) = \ - { cpu_vendor_id, cpu_dev } - -extern struct cpu_vendor_dev __x86cpuvendor_start[], __x86cpuvendor_end[]; +extern struct cpu_dev *__x86_cpu_dev_start[], *__x86_cpu_dev_end[]; -extern int get_model_name(struct cpuinfo_x86 *c); extern void display_cacheinfo(struct cpuinfo_x86 *c); #endif diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index dd097b835839..c24c4a487b7c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -256,7 +256,8 @@ static u32 get_cur_val(const cpumask_t *mask) * Only IA32_APERF/IA32_MPERF ratio is architecturally defined and * no meaning should be associated with absolute values of these MSRs. */ -static unsigned int get_measured_perf(unsigned int cpu) +static unsigned int get_measured_perf(struct cpufreq_policy *policy, + unsigned int cpu) { union { struct { @@ -326,7 +327,7 @@ static unsigned int get_measured_perf(unsigned int cpu) #endif - retval = per_cpu(drv_data, cpu)->max_freq * perf_percent / 100; + retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100; put_cpu(); set_cpus_allowed_ptr(current, &saved_mask); @@ -785,7 +786,11 @@ static int __init acpi_cpufreq_init(void) if (ret) return ret; - return cpufreq_register_driver(&acpi_cpufreq_driver); + ret = cpufreq_register_driver(&acpi_cpufreq_driver); + if (ret) + free_percpu(acpi_perf_data); + + return ret; } static void __exit acpi_cpufreq_exit(void) @@ -795,8 +800,6 @@ static void __exit acpi_cpufreq_exit(void) cpufreq_unregister_driver(&acpi_cpufreq_driver); free_percpu(acpi_perf_data); - - return; } module_param(acpi_pstate_strict, uint, 0644); diff --git a/arch/x86/kernel/cpu/cpufreq/elanfreq.c b/arch/x86/kernel/cpu/cpufreq/elanfreq.c index e4a4bf870e94..fe613c93b366 100644 --- a/arch/x86/kernel/cpu/cpufreq/elanfreq.c +++ b/arch/x86/kernel/cpu/cpufreq/elanfreq.c @@ -25,8 +25,8 @@ #include <linux/cpufreq.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> +#include <linux/timex.h> +#include <linux/io.h> #define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ #define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ @@ -82,7 +82,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) u8 clockspeed_reg; /* Clock Speed Register */ local_irq_disable(); - outb_p(0x80,REG_CSCIR); + outb_p(0x80, REG_CSCIR); clockspeed_reg = inb_p(REG_CSCDR); local_irq_enable(); @@ -98,10 +98,10 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) } /* 33 MHz is not 32 MHz... */ - if ((clockspeed_reg & 0xE0)==0xA0) + if ((clockspeed_reg & 0xE0) == 0xA0) return 33000; - return ((1<<((clockspeed_reg & 0xE0) >> 5)) * 1000); + return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; } @@ -117,7 +117,7 @@ static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) * There is no return value. */ -static void elanfreq_set_cpu_state (unsigned int state) +static void elanfreq_set_cpu_state(unsigned int state) { struct cpufreq_freqs freqs; @@ -144,20 +144,20 @@ static void elanfreq_set_cpu_state (unsigned int state) */ local_irq_disable(); - outb_p(0x40,REG_CSCIR); /* Disable hyperspeed mode */ - outb_p(0x00,REG_CSCDR); + outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x00, REG_CSCDR); local_irq_enable(); /* wait till internal pipelines and */ udelay(1000); /* buffers have cleaned up */ local_irq_disable(); /* now, set the CPU clock speed register (0x80) */ - outb_p(0x80,REG_CSCIR); - outb_p(elan_multiplier[state].val80h,REG_CSCDR); + outb_p(0x80, REG_CSCIR); + outb_p(elan_multiplier[state].val80h, REG_CSCDR); /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ - outb_p(0x40,REG_CSCIR); - outb_p(elan_multiplier[state].val40h,REG_CSCDR); + outb_p(0x40, REG_CSCIR); + outb_p(elan_multiplier[state].val40h, REG_CSCDR); udelay(10000); local_irq_enable(); @@ -173,12 +173,12 @@ static void elanfreq_set_cpu_state (unsigned int state) * for the hardware supported by the driver. */ -static int elanfreq_verify (struct cpufreq_policy *policy) +static int elanfreq_verify(struct cpufreq_policy *policy) { return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]); } -static int elanfreq_target (struct cpufreq_policy *policy, +static int elanfreq_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -205,7 +205,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) /* capability check */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) + (c->x86 != 4) || (c->x86_model != 10)) return -ENODEV; /* max freq */ @@ -213,7 +213,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) max_freq = elanfreq_get_cpu_frequency(0); /* table init */ - for (i=0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) { if (elanfreq_table[i].frequency > max_freq) elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID; } @@ -224,7 +224,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu); return 0; @@ -260,7 +260,7 @@ __setup("elanfreq=", elanfreq_setup); #endif -static struct freq_attr* elanfreq_attr[] = { +static struct freq_attr *elanfreq_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -284,9 +284,9 @@ static int __init elanfreq_init(void) /* Test if we have the right hardware */ if ((c->x86_vendor != X86_VENDOR_AMD) || - (c->x86 != 4) || (c->x86_model!=10)) { + (c->x86 != 4) || (c->x86_model != 10)) { printk(KERN_INFO "elanfreq: error: no Elan processor found!\n"); - return -ENODEV; + return -ENODEV; } return cpufreq_register_driver(&elanfreq_driver); } @@ -298,7 +298,7 @@ static void __exit elanfreq_exit(void) } -module_param (max_freq, int, 0444); +module_param(max_freq, int, 0444); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, Sven Geggus <sven@geggus.net>"); diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c index f1685fb91fbd..b8e05ee4f736 100644 --- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c +++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c @@ -171,7 +171,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c) } if (c->x86 != 0xF) { - printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@lists.linux.org.uk>\n"); + printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. Please send an e-mail to <cpufreq@vger.kernel.org>\n"); return 0; } diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c index eb9b62b0830c..b5ced806a316 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c @@ -15,12 +15,11 @@ #include <linux/slab.h> #include <asm/msr.h> -#include <asm/timex.h> -#include <asm/io.h> +#include <linux/timex.h> +#include <linux/io.h> - -#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long - as it is unused */ +#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long + as it is unused */ static unsigned int busfreq; /* FSB, in 10 kHz */ static unsigned int max_multiplier; @@ -53,7 +52,7 @@ static int powernow_k6_get_cpu_multiplier(void) msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue=inl(POWERNOW_IOPORT + 0x8); + invalue = inl(POWERNOW_IOPORT + 0x8); msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ @@ -67,9 +66,9 @@ static int powernow_k6_get_cpu_multiplier(void) * * Tries to change the PowerNow! multiplier */ -static void powernow_k6_set_state (unsigned int best_i) +static void powernow_k6_set_state(unsigned int best_i) { - unsigned long outvalue=0, invalue=0; + unsigned long outvalue = 0, invalue = 0; unsigned long msrval; struct cpufreq_freqs freqs; @@ -90,10 +89,10 @@ static void powernow_k6_set_state (unsigned int best_i) msrval = POWERNOW_IOPORT + 0x1; wrmsr(MSR_K6_EPMR, msrval, 0); /* enable the PowerNow port */ - invalue=inl(POWERNOW_IOPORT + 0x8); + invalue = inl(POWERNOW_IOPORT + 0x8); invalue = invalue & 0xf; outvalue = outvalue | invalue; - outl(outvalue ,(POWERNOW_IOPORT + 0x8)); + outl(outvalue , (POWERNOW_IOPORT + 0x8)); msrval = POWERNOW_IOPORT + 0x0; wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ @@ -124,7 +123,7 @@ static int powernow_k6_verify(struct cpufreq_policy *policy) * * sets a new CPUFreq policy */ -static int powernow_k6_target (struct cpufreq_policy *policy, +static int powernow_k6_target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation) { @@ -152,7 +151,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) busfreq = cpu_khz / max_multiplier; /* table init */ - for (i=0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { + for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { if (clock_ratio[i].index > max_multiplier) clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; else @@ -165,7 +164,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) result = cpufreq_frequency_table_cpuinfo(policy, clock_ratio); if (result) - return (result); + return result; cpufreq_frequency_table_get_attr(clock_ratio, policy->cpu); @@ -176,8 +175,8 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy) static int powernow_k6_cpu_exit(struct cpufreq_policy *policy) { unsigned int i; - for (i=0; i<8; i++) { - if (i==max_multiplier) + for (i = 0; i < 8; i++) { + if (i == max_multiplier) powernow_k6_set_state(i); } cpufreq_frequency_table_put_attr(policy->cpu); @@ -189,7 +188,7 @@ static unsigned int powernow_k6_get(unsigned int cpu) return busfreq * powernow_k6_get_cpu_multiplier(); } -static struct freq_attr* powernow_k6_attr[] = { +static struct freq_attr *powernow_k6_attr[] = { &cpufreq_freq_attr_scaling_available_freqs, NULL, }; @@ -227,7 +226,7 @@ static int __init powernow_k6_init(void) } if (cpufreq_register_driver(&powernow_k6_driver)) { - release_region (POWERNOW_IOPORT, 16); + release_region(POWERNOW_IOPORT, 16); return -EINVAL; } @@ -243,13 +242,13 @@ static int __init powernow_k6_init(void) static void __exit powernow_k6_exit(void) { cpufreq_unregister_driver(&powernow_k6_driver); - release_region (POWERNOW_IOPORT, 16); + release_region(POWERNOW_IOPORT, 16); } -MODULE_AUTHOR ("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); -MODULE_DESCRIPTION ("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); -MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Arjan van de Ven <arjanv@redhat.com>, Dave Jones <davej@codemonkey.org.uk>, Dominik Brodowski <linux@brodo.de>"); +MODULE_DESCRIPTION("PowerNow! driver for AMD K6-2+ / K6-3+ processors."); +MODULE_LICENSE("GPL"); module_init(powernow_k6_init); module_exit(powernow_k6_exit); diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c index 15e13c01cc36..3b5f06423e77 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c @@ -26,7 +26,7 @@ #include <asm/cpufeature.h> #define PFX "speedstep-centrino: " -#define MAINTAINER "cpufreq@lists.linux.org.uk" +#define MAINTAINER "cpufreq@vger.kernel.org" #define dprintk(msg...) \ cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg) diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index ada50505a5c8..ffd0f5ed071a 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -15,13 +15,11 @@ /* * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU */ -static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) { unsigned char ccr2, ccr3; - unsigned long flags; /* we test for DEVID by checking whether CCR3 is writable */ - local_irq_save(flags); ccr3 = getCx86(CX86_CCR3); setCx86(CX86_CCR3, ccr3 ^ 0x80); getCx86(0xc0); /* dummy to change bus */ @@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) *dir0 = getCx86(CX86_DIR0); *dir1 = getCx86(CX86_DIR1); } - local_irq_restore(flags); } +static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1) +{ + unsigned long flags; + + local_irq_save(flags); + __do_cyrix_devid(dir0, dir1); + local_irq_restore(flags); +} /* * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in * order to identify the Cyrix CPU model after we're out of setup.c @@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void) local_irq_restore(flags); } +static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c) +{ + unsigned char dir0, dir0_msn, dir1 = 0; + + __do_cyrix_devid(&dir0, &dir1); + dir0_msn = dir0 >> 4; /* identifies CPU "family" */ + + switch (dir0_msn) { + case 3: /* 6x86/6x86L */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + case 5: /* 6x86MX/M II */ + /* Emulate MTRRs using Cyrix's ARRs. */ + set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); + break; + } +} static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) { @@ -278,7 +301,6 @@ static void __cpuinit init_cyrix(struct cpuinfo_x86 *c) */ if ((0x30 <= dir1 && dir1 <= 0x6f) || (0x80 <= dir1 && dir1 <= 0x8f)) geode_configure(); - get_model_name(c); /* get CPU marketing name */ return; } else { /* MediaGX */ Cx86_cb[2] = (dir0_lsn & 1) ? '3' : '4'; @@ -416,16 +438,19 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c) static struct cpu_dev cyrix_cpu_dev __cpuinitdata = { .c_vendor = "Cyrix", .c_ident = { "CyrixInstead" }, + .c_early_init = early_init_cyrix, .c_init = init_cyrix, .c_identify = cyrix_identify, + .c_x86_vendor = X86_VENDOR_CYRIX, }; -cpu_vendor_dev_register(X86_VENDOR_CYRIX, &cyrix_cpu_dev); +cpu_dev_register(cyrix_cpu_dev); static struct cpu_dev nsc_cpu_dev __cpuinitdata = { .c_vendor = "NSC", .c_ident = { "Geode by NSC" }, .c_init = init_nsc, + .c_x86_vendor = X86_VENDOR_NSC, }; -cpu_vendor_dev_register(X86_VENDOR_NSC, &nsc_cpu_dev); +cpu_dev_register(nsc_cpu_dev); diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 77618c717d76..99468dbd08da 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -15,6 +15,11 @@ #include <asm/ds.h> #include <asm/bugs.h> +#ifdef CONFIG_X86_64 +#include <asm/topology.h> +#include <asm/numa_64.h> +#endif + #include "cpu.h" #ifdef CONFIG_X86_LOCAL_APIC @@ -25,14 +30,20 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { - /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ - if (c->x86 == 15 && c->x86_cache_alignment == 64) - c->x86_cache_alignment = 128; if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); + +#ifdef CONFIG_X86_64 + set_cpu_cap(c, X86_FEATURE_SYSENTER32); +#else + /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ + if (c->x86 == 15 && c->x86_cache_alignment == 64) + c->x86_cache_alignment = 128; +#endif } +#ifdef CONFIG_X86_32 /* * Early probe support logic for ppro memory erratum #50 * @@ -52,15 +63,54 @@ int __cpuinit ppro_with_ram_bug(void) return 0; } +#ifdef CONFIG_X86_F00F_BUG +static void __cpuinit trap_init_f00f_bug(void) +{ + __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); -/* - * P4 Xeon errata 037 workaround. - * Hardware prefetcher may cause stale data to be loaded into the cache. - */ -static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) + /* + * Update the IDT descriptor and reload the IDT so that + * it uses the read-only mapped virtual address. + */ + idt_descr.address = fix_to_virt(FIX_F00F_IDT); + load_idt(&idt_descr); +} +#endif + +static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) { unsigned long lo, hi; +#ifdef CONFIG_X86_F00F_BUG + /* + * All current models of Pentium and Pentium with MMX technology CPUs + * have the F0 0F bug, which lets nonprivileged users lock up the system. + * Note that the workaround only should be initialized once... + */ + c->f00f_bug = 0; + if (!paravirt_enabled() && c->x86 == 5) { + static int f00f_workaround_enabled; + + c->f00f_bug = 1; + if (!f00f_workaround_enabled) { + trap_init_f00f_bug(); + printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); + f00f_workaround_enabled = 1; + } + } +#endif + + /* + * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until + * model 3 mask 3 + */ + if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) + clear_cpu_cap(c, X86_FEATURE_SEP); + + /* + * P4 Xeon errata 037 workaround. + * Hardware prefetcher may cause stale data to be loaded into the cache. + */ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { rdmsr(MSR_IA32_MISC_ENABLE, lo, hi); if ((lo & (1<<9)) == 0) { @@ -70,13 +120,68 @@ static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c) wrmsr (MSR_IA32_MISC_ENABLE, lo, hi); } } + + /* + * See if we have a good local APIC by checking for buggy Pentia, + * i.e. all B steppings and the C2 stepping of P54C when using their + * integrated APIC (see 11AP erratum in "Pentium Processor + * Specification Update"). + */ + if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 && + (c->x86_mask < 0x6 || c->x86_mask == 0xb)) + set_cpu_cap(c, X86_FEATURE_11AP); + + +#ifdef CONFIG_X86_INTEL_USERCOPY + /* + * Set up the preferred alignment for movsl bulk memory moves + */ + switch (c->x86) { + case 4: /* 486: untested */ + break; + case 5: /* Old Pentia: untested */ + break; + case 6: /* PII/PIII only like movsl with 8-byte alignment */ + movsl_mask.mask = 7; + break; + case 15: /* P4 is OK down to 8-byte alignment */ + movsl_mask.mask = 7; + break; + } +#endif + +#ifdef CONFIG_X86_NUMAQ + numaq_tsc_disable(); +#endif } +#else +static void __cpuinit intel_workarounds(struct cpuinfo_x86 *c) +{ +} +#endif +static void __cpuinit srat_detect_node(void) +{ +#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) + unsigned node; + int cpu = smp_processor_id(); + int apicid = hard_smp_processor_id(); + + /* Don't do the funky fallback heuristics the AMD version employs + for now. */ + node = apicid_to_node[apicid]; + if (node == NUMA_NO_NODE || !node_online(node)) + node = first_node(node_online_map); + numa_set_node(cpu, node); + + printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); +#endif +} /* * find out the number of processor cores on the die */ -static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) +static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) { unsigned int eax, ebx, ecx, edx; @@ -91,45 +196,51 @@ static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c) return 1; } -#ifdef CONFIG_X86_F00F_BUG -static void __cpuinit trap_init_f00f_bug(void) +static void __cpuinit detect_vmx_virtcap(struct cpuinfo_x86 *c) { - __set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO); - - /* - * Update the IDT descriptor and reload the IDT so that - * it uses the read-only mapped virtual address. - */ - idt_descr.address = fix_to_virt(FIX_F00F_IDT); - load_idt(&idt_descr); + /* Intel VMX MSR indicated features */ +#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000 +#define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000 +#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000 +#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001 +#define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002 +#define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020 + + u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2; + + clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW); + clear_cpu_cap(c, X86_FEATURE_VNMI); + clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); + clear_cpu_cap(c, X86_FEATURE_EPT); + clear_cpu_cap(c, X86_FEATURE_VPID); + + rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high); + msr_ctl = vmx_msr_high | vmx_msr_low; + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW) + set_cpu_cap(c, X86_FEATURE_TPR_SHADOW); + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI) + set_cpu_cap(c, X86_FEATURE_VNMI); + if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) { + rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2, + vmx_msr_low, vmx_msr_high); + msr_ctl2 = vmx_msr_high | vmx_msr_low; + if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) && + (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)) + set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); + if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT) + set_cpu_cap(c, X86_FEATURE_EPT); + if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID) + set_cpu_cap(c, X86_FEATURE_VPID); + } } -#endif static void __cpuinit init_intel(struct cpuinfo_x86 *c) { unsigned int l2 = 0; - char *p = NULL; early_init_intel(c); -#ifdef CONFIG_X86_F00F_BUG - /* - * All current models of Pentium and Pentium with MMX technology CPUs - * have the F0 0F bug, which lets nonprivileged users lock up the system. - * Note that the workaround only should be initialized once... - */ - c->f00f_bug = 0; - if (!paravirt_enabled() && c->x86 == 5) { - static int f00f_workaround_enabled; - - c->f00f_bug = 1; - if (!f00f_workaround_enabled) { - trap_init_f00f_bug(); - printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n"); - f00f_workaround_enabled = 1; - } - } -#endif + intel_workarounds(c); l2 = init_intel_cacheinfo(c); if (c->cpuid_level > 9) { @@ -139,16 +250,32 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); } - /* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */ - if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633) - clear_cpu_cap(c, X86_FEATURE_SEP); + if (cpu_has_xmm2) + set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); + if (cpu_has_ds) { + unsigned int l1; + rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); + if (!(l1 & (1<<11))) + set_cpu_cap(c, X86_FEATURE_BTS); + if (!(l1 & (1<<12))) + set_cpu_cap(c, X86_FEATURE_PEBS); + ds_init_intel(c); + } +#ifdef CONFIG_X86_64 + if (c->x86 == 15) + c->x86_cache_alignment = c->x86_clflush_size * 2; + if (c->x86 == 6) + set_cpu_cap(c, X86_FEATURE_REP_GOOD); +#else /* * Names for the Pentium II/Celeron processors * detectable only by also checking the cache size. * Dixon is NOT a Celeron. */ if (c->x86 == 6) { + char *p = NULL; + switch (c->x86_model) { case 5: if (c->x86_mask == 0) { @@ -171,70 +298,41 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c) p = "Celeron (Coppermine)"; break; } - } - - if (p) - strcpy(c->x86_model_id, p); - c->x86_max_cores = num_cpu_cores(c); - - detect_ht(c); - - /* Work around errata */ - Intel_errata_workarounds(c); - -#ifdef CONFIG_X86_INTEL_USERCOPY - /* - * Set up the preferred alignment for movsl bulk memory moves - */ - switch (c->x86) { - case 4: /* 486: untested */ - break; - case 5: /* Old Pentia: untested */ - break; - case 6: /* PII/PIII only like movsl with 8-byte alignment */ - movsl_mask.mask = 7; - break; - case 15: /* P4 is OK down to 8-byte alignment */ - movsl_mask.mask = 7; - break; + if (p) + strcpy(c->x86_model_id, p); } -#endif - if (cpu_has_xmm2) - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - if (c->x86 == 15) { + if (c->x86 == 15) set_cpu_cap(c, X86_FEATURE_P4); - } if (c->x86 == 6) set_cpu_cap(c, X86_FEATURE_P3); - if (cpu_has_ds) { - unsigned int l1; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } if (cpu_has_bts) - ds_init_intel(c); + ptrace_bts_init_intel(c); - /* - * See if we have a good local APIC by checking for buggy Pentia, - * i.e. all B steppings and the C2 stepping of P54C when using their - * integrated APIC (see 11AP erratum in "Pentium Processor - * Specification Update"). - */ - if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 && - (c->x86_mask < 0x6 || c->x86_mask == 0xb)) - set_cpu_cap(c, X86_FEATURE_11AP); +#endif -#ifdef CONFIG_X86_NUMAQ - numaq_tsc_disable(); + detect_extended_topology(c); + if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) { + /* + * let's use the legacy cpuid vector 0x1 and 0x4 for topology + * detection. + */ + c->x86_max_cores = intel_num_cpu_cores(c); +#ifdef CONFIG_X86_32 + detect_ht(c); #endif + } + + /* Work around errata */ + srat_detect_node(); + + if (cpu_has(c, X86_FEATURE_VMX)) + detect_vmx_virtcap(c); } +#ifdef CONFIG_X86_32 static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size) { /* @@ -247,10 +345,12 @@ static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned i size = 256; return size; } +#endif static struct cpu_dev intel_cpu_dev __cpuinitdata = { .c_vendor = "Intel", .c_ident = { "GenuineIntel" }, +#ifdef CONFIG_X86_32 .c_models = { { .vendor = X86_VENDOR_INTEL, .family = 4, .model_names = { @@ -300,12 +400,12 @@ static struct cpu_dev intel_cpu_dev __cpuinitdata = { } }, }, + .c_size_cache = intel_size_cache, +#endif .c_early_init = early_init_intel, .c_init = init_intel, - .c_size_cache = intel_size_cache, + .c_x86_vendor = X86_VENDOR_INTEL, }; -cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); - -/* arch_initcall(intel_cpu_init); */ +cpu_dev_register(intel_cpu_dev); diff --git a/arch/x86/kernel/cpu/intel_64.c b/arch/x86/kernel/cpu/intel_64.c deleted file mode 100644 index 1019c58d39f0..000000000000 --- a/arch/x86/kernel/cpu/intel_64.c +++ /dev/null @@ -1,95 +0,0 @@ -#include <linux/init.h> -#include <linux/smp.h> -#include <asm/processor.h> -#include <asm/ptrace.h> -#include <asm/topology.h> -#include <asm/numa_64.h> - -#include "cpu.h" - -static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) -{ - if ((c->x86 == 0xf && c->x86_model >= 0x03) || - (c->x86 == 0x6 && c->x86_model >= 0x0e)) - set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); - - set_cpu_cap(c, X86_FEATURE_SYSENTER32); -} - -/* - * find out the number of processor cores on the die - */ -static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c) -{ - unsigned int eax, t; - - if (c->cpuid_level < 4) - return 1; - - cpuid_count(4, 0, &eax, &t, &t, &t); - - if (eax & 0x1f) - return ((eax >> 26) + 1); - else - return 1; -} - -static void __cpuinit srat_detect_node(void) -{ -#ifdef CONFIG_NUMA - unsigned node; - int cpu = smp_processor_id(); - int apicid = hard_smp_processor_id(); - - /* Don't do the funky fallback heuristics the AMD version employs - for now. */ - node = apicid_to_node[apicid]; - if (node == NUMA_NO_NODE || !node_online(node)) - node = first_node(node_online_map); - numa_set_node(cpu, node); - - printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node); -#endif -} - -static void __cpuinit init_intel(struct cpuinfo_x86 *c) -{ - init_intel_cacheinfo(c); - if (c->cpuid_level > 9) { - unsigned eax = cpuid_eax(10); - /* Check for version and the number of counters */ - if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) - set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); - } - - if (cpu_has_ds) { - unsigned int l1, l2; - rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); - if (!(l1 & (1<<11))) - set_cpu_cap(c, X86_FEATURE_BTS); - if (!(l1 & (1<<12))) - set_cpu_cap(c, X86_FEATURE_PEBS); - } - - - if (cpu_has_bts) - ds_init_intel(c); - - if (c->x86 == 15) - c->x86_cache_alignment = c->x86_clflush_size * 2; - if (c->x86 == 6) - set_cpu_cap(c, X86_FEATURE_REP_GOOD); - set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); - c->x86_max_cores = intel_num_cpu_cores(c); - - srat_detect_node(); -} - -static struct cpu_dev intel_cpu_dev __cpuinitdata = { - .c_vendor = "Intel", - .c_ident = { "GenuineIntel" }, - .c_early_init = early_init_intel, - .c_init = init_intel, -}; -cpu_vendor_dev_register(X86_VENDOR_INTEL, &intel_cpu_dev); - diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c index 726a5fcdf341..4b031a4ac856 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c @@ -860,7 +860,7 @@ error: return err; } -static void mce_remove_device(unsigned int cpu) +static __cpuinit void mce_remove_device(unsigned int cpu) { int i; diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index cb7d3b6a80eb..4e8d77f01eeb 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -401,12 +401,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base, tmp |= ~((1<<(hi - 1)) - 1); if (tmp != mask_lo) { - static int once = 1; - - if (once) { - printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n"); - once = 0; - } + WARN_ONCE(1, KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n"); mask_lo = tmp; } } diff --git a/arch/x86/kernel/cpu/mtrr/if.c b/arch/x86/kernel/cpu/mtrr/if.c index 84c480bb3715..4c4214690dd1 100644 --- a/arch/x86/kernel/cpu/mtrr/if.c +++ b/arch/x86/kernel/cpu/mtrr/if.c @@ -405,9 +405,9 @@ static int mtrr_seq_show(struct seq_file *seq, void *offset) } /* RED-PEN: base can be > 32bit */ len += seq_printf(seq, - "reg%02i: base=0x%05lx000 (%4luMB), size=%4lu%cB: %s, count=%d\n", + "reg%02i: base=0x%06lx000 (%5luMB), size=%5lu%cB, count=%d: %s\n", i, base, base >> (20 - PAGE_SHIFT), size, factor, - mtrr_attrib_to_str(type), mtrr_usage_table[i]); + mtrr_usage_table[i], mtrr_attrib_to_str(type)); } } return 0; diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c index b117d7f8a564..c78c04821ea1 100644 --- a/arch/x86/kernel/cpu/mtrr/main.c +++ b/arch/x86/kernel/cpu/mtrr/main.c @@ -729,7 +729,7 @@ struct var_mtrr_range_state { mtrr_type type; }; -struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; +static struct var_mtrr_range_state __initdata range_state[RANGE_NUM]; static int __initdata debug_print; static int __init @@ -759,7 +759,8 @@ x86_get_mtrr_mem_range(struct res_range *range, int nr_range, /* take out UC ranges */ for (i = 0; i < num_var_ranges; i++) { type = range_state[i].type; - if (type != MTRR_TYPE_UNCACHABLE) + if (type != MTRR_TYPE_UNCACHABLE && + type != MTRR_TYPE_WRPROT) continue; size = range_state[i].size_pfn; if (!size) @@ -834,7 +835,14 @@ static int __init enable_mtrr_cleanup_setup(char *str) enable_mtrr_cleanup = 1; return 0; } -early_param("enble_mtrr_cleanup", enable_mtrr_cleanup_setup); +early_param("enable_mtrr_cleanup", enable_mtrr_cleanup_setup); + +static int __init mtrr_cleanup_debug_setup(char *str) +{ + debug_print = 1; + return 0; +} +early_param("mtrr_cleanup_debug", mtrr_cleanup_debug_setup); struct var_mtrr_state { unsigned long range_startk; @@ -898,6 +906,27 @@ set_var_mtrr_all(unsigned int address_bits) } } +static unsigned long to_size_factor(unsigned long sizek, char *factorp) +{ + char factor; + unsigned long base = sizek; + + if (base & ((1<<10) - 1)) { + /* not MB alignment */ + factor = 'K'; + } else if (base & ((1<<20) - 1)){ + factor = 'M'; + base >>= 10; + } else { + factor = 'G'; + base >>= 20; + } + + *factorp = factor; + + return base; +} + static unsigned int __init range_to_mtrr(unsigned int reg, unsigned long range_startk, unsigned long range_sizek, unsigned char type) @@ -919,13 +948,21 @@ range_to_mtrr(unsigned int reg, unsigned long range_startk, align = max_align; sizek = 1 << align; - if (debug_print) + if (debug_print) { + char start_factor = 'K', size_factor = 'K'; + unsigned long start_base, size_base; + + start_base = to_size_factor(range_startk, &start_factor), + size_base = to_size_factor(sizek, &size_factor), + printk(KERN_DEBUG "Setting variable MTRR %d, " - "base: %ldMB, range: %ldMB, type %s\n", - reg, range_startk >> 10, sizek >> 10, + "base: %ld%cB, range: %ld%cB, type %s\n", + reg, start_base, start_factor, + size_base, size_factor, (type == MTRR_TYPE_UNCACHABLE)?"UC": ((type == MTRR_TYPE_WRBACK)?"WB":"Other") ); + } save_var_mtrr(reg++, range_startk, sizek, type); range_startk += sizek; range_sizek -= sizek; @@ -970,6 +1007,8 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, /* try to append some small hole */ range0_basek = state->range_startk; range0_sizek = ALIGN(state->range_sizek, chunk_sizek); + + /* no increase */ if (range0_sizek == state->range_sizek) { if (debug_print) printk(KERN_DEBUG "rangeX: %016lx - %016lx\n", @@ -980,13 +1019,40 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, return 0; } - range0_sizek -= chunk_sizek; - if (range0_sizek && sizek) { - while (range0_basek + range0_sizek > (basek + sizek)) { - range0_sizek -= chunk_sizek; - if (!range0_sizek) - break; - } + /* only cut back, when it is not the last */ + if (sizek) { + while (range0_basek + range0_sizek > (basek + sizek)) { + if (range0_sizek >= chunk_sizek) + range0_sizek -= chunk_sizek; + else + range0_sizek = 0; + + if (!range0_sizek) + break; + } + } + +second_try: + range_basek = range0_basek + range0_sizek; + + /* one hole in the middle */ + if (range_basek > basek && range_basek <= (basek + sizek)) + second_sizek = range_basek - basek; + + if (range0_sizek > state->range_sizek) { + + /* one hole in middle or at end */ + hole_sizek = range0_sizek - state->range_sizek - second_sizek; + + /* hole size should be less than half of range0 size */ + if (hole_sizek >= (range0_sizek >> 1) && + range0_sizek >= chunk_sizek) { + range0_sizek -= chunk_sizek; + second_sizek = 0; + hole_sizek = 0; + + goto second_try; + } } if (range0_sizek) { @@ -996,50 +1062,28 @@ range_to_mtrr_with_hole(struct var_mtrr_state *state, unsigned long basek, (range0_basek + range0_sizek)<<10); state->reg = range_to_mtrr(state->reg, range0_basek, range0_sizek, MTRR_TYPE_WRBACK); - - } - - range_basek = range0_basek + range0_sizek; - range_sizek = chunk_sizek; - - if (range_basek + range_sizek > basek && - range_basek + range_sizek <= (basek + sizek)) { - /* one hole */ - second_basek = basek; - second_sizek = range_basek + range_sizek - basek; } - /* if last piece, only could one hole near end */ - if ((second_basek || !basek) && - range_sizek - (state->range_sizek - range0_sizek) - second_sizek < - (chunk_sizek >> 1)) { - /* - * one hole in middle (second_sizek is 0) or at end - * (second_sizek is 0 ) - */ - hole_sizek = range_sizek - (state->range_sizek - range0_sizek) - - second_sizek; - hole_basek = range_basek + range_sizek - hole_sizek - - second_sizek; - } else { - /* fallback for big hole, or several holes */ + if (range0_sizek < state->range_sizek) { + /* need to handle left over */ range_sizek = state->range_sizek - range0_sizek; - second_basek = 0; - second_sizek = 0; + + if (debug_print) + printk(KERN_DEBUG "range: %016lx - %016lx\n", + range_basek<<10, + (range_basek + range_sizek)<<10); + state->reg = range_to_mtrr(state->reg, range_basek, + range_sizek, MTRR_TYPE_WRBACK); } - if (debug_print) - printk(KERN_DEBUG "range: %016lx - %016lx\n", range_basek<<10, - (range_basek + range_sizek)<<10); - state->reg = range_to_mtrr(state->reg, range_basek, range_sizek, - MTRR_TYPE_WRBACK); if (hole_sizek) { + hole_basek = range_basek - hole_sizek - second_sizek; if (debug_print) printk(KERN_DEBUG "hole: %016lx - %016lx\n", - hole_basek<<10, (hole_basek + hole_sizek)<<10); - state->reg = range_to_mtrr(state->reg, hole_basek, hole_sizek, - MTRR_TYPE_UNCACHABLE); - + hole_basek<<10, + (hole_basek + hole_sizek)<<10); + state->reg = range_to_mtrr(state->reg, hole_basek, + hole_sizek, MTRR_TYPE_UNCACHABLE); } return second_sizek; @@ -1154,11 +1198,11 @@ struct mtrr_cleanup_result { }; /* - * gran_size: 1M, 2M, ..., 2G - * chunk size: gran_size, ..., 4G - * so we need (2+13)*6 + * gran_size: 64K, 128K, 256K, 512K, 1M, 2M, ..., 2G + * chunk size: gran_size, ..., 2G + * so we need (1+16)*8 */ -#define NUM_RESULT 90 +#define NUM_RESULT 136 #define PSHIFT (PAGE_SHIFT - 10) static struct mtrr_cleanup_result __initdata result[NUM_RESULT]; @@ -1168,13 +1212,14 @@ static unsigned long __initdata min_loss_pfn[RANGE_NUM]; static int __init mtrr_cleanup(unsigned address_bits) { unsigned long extra_remove_base, extra_remove_size; - unsigned long i, base, size, def, dummy; + unsigned long base, size, def, dummy; mtrr_type type; int nr_range, nr_range_new; u64 chunk_size, gran_size; unsigned long range_sums, range_sums_new; int index_good; int num_reg_good; + int i; /* extra one for all 0 */ int num[MTRR_NUM_TYPES + 1]; @@ -1204,6 +1249,8 @@ static int __init mtrr_cleanup(unsigned address_bits) continue; if (!size) type = MTRR_NUM_TYPES; + if (type == MTRR_TYPE_WRPROT) + type = MTRR_TYPE_UNCACHABLE; num[type]++; } @@ -1216,23 +1263,57 @@ static int __init mtrr_cleanup(unsigned address_bits) num_var_ranges - num[MTRR_NUM_TYPES]) return 0; + /* print original var MTRRs at first, for debugging: */ + printk(KERN_DEBUG "original variable MTRRs\n"); + for (i = 0; i < num_var_ranges; i++) { + char start_factor = 'K', size_factor = 'K'; + unsigned long start_base, size_base; + + size_base = range_state[i].size_pfn << (PAGE_SHIFT - 10); + if (!size_base) + continue; + + size_base = to_size_factor(size_base, &size_factor), + start_base = range_state[i].base_pfn << (PAGE_SHIFT - 10); + start_base = to_size_factor(start_base, &start_factor), + type = range_state[i].type; + + printk(KERN_DEBUG "reg %d, base: %ld%cB, range: %ld%cB, type %s\n", + i, start_base, start_factor, + size_base, size_factor, + (type == MTRR_TYPE_UNCACHABLE) ? "UC" : + ((type == MTRR_TYPE_WRPROT) ? "WP" : + ((type == MTRR_TYPE_WRBACK) ? "WB" : "Other")) + ); + } + memset(range, 0, sizeof(range)); extra_remove_size = 0; - if (mtrr_tom2) { - extra_remove_base = 1 << (32 - PAGE_SHIFT); + extra_remove_base = 1 << (32 - PAGE_SHIFT); + if (mtrr_tom2) extra_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - extra_remove_base; - } nr_range = x86_get_mtrr_mem_range(range, 0, extra_remove_base, extra_remove_size); + /* + * [0, 1M) should always be coverred by var mtrr with WB + * and fixed mtrrs should take effective before var mtrr for it + */ + nr_range = add_range_with_merge(range, nr_range, 0, + (1ULL<<(20 - PAGE_SHIFT)) - 1); + /* sort the ranges */ + sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); + range_sums = sum_ranges(range, nr_range); printk(KERN_INFO "total RAM coverred: %ldM\n", range_sums >> (20 - PAGE_SHIFT)); if (mtrr_chunk_size && mtrr_gran_size) { int num_reg; + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; - debug_print = 1; + debug_print++; /* convert ranges to var ranges state */ num_reg = x86_setup_var_mtrrs(range, nr_range, mtrr_chunk_size, mtrr_gran_size); @@ -1256,34 +1337,48 @@ static int __init mtrr_cleanup(unsigned address_bits) result[i].lose_cover_sizek = (range_sums - range_sums_new) << PSHIFT; - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?"*BAD*":" ", result[i].gran_sizek >> 10, - result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ldM \n", + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t", + result[i].bad?"*BAD*":" ", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n", result[i].num_reg, result[i].bad?"-":"", - result[i].lose_cover_sizek >> 10); + lose_base, lose_factor); if (!result[i].bad) { set_var_mtrr_all(address_bits); return 1; } printk(KERN_INFO "invalid mtrr_gran_size or mtrr_chunk_size, " "will find optimal one\n"); - debug_print = 0; + debug_print--; memset(result, 0, sizeof(result[0])); } i = 0; memset(min_loss_pfn, 0xff, sizeof(min_loss_pfn)); memset(result, 0, sizeof(result)); - for (gran_size = (1ULL<<20); gran_size < (1ULL<<32); gran_size <<= 1) { - for (chunk_size = gran_size; chunk_size < (1ULL<<33); + for (gran_size = (1ULL<<16); gran_size < (1ULL<<32); gran_size <<= 1) { + char gran_factor; + unsigned long gran_base; + + if (debug_print) + gran_base = to_size_factor(gran_size >> 10, &gran_factor); + + for (chunk_size = gran_size; chunk_size < (1ULL<<32); chunk_size <<= 1) { int num_reg; - if (debug_print) - printk(KERN_INFO - "\ngran_size: %lldM chunk_size_size: %lldM\n", - gran_size >> 20, chunk_size >> 20); + if (debug_print) { + char chunk_factor; + unsigned long chunk_base; + + chunk_base = to_size_factor(chunk_size>>10, &chunk_factor), + printk(KERN_INFO "\n"); + printk(KERN_INFO "gran_size: %ld%c chunk_size: %ld%c \n", + gran_base, gran_factor, chunk_base, chunk_factor); + } if (i >= NUM_RESULT) continue; @@ -1326,12 +1421,18 @@ static int __init mtrr_cleanup(unsigned address_bits) /* print out all */ for (i = 0; i < NUM_RESULT; i++) { - printk(KERN_INFO "%sgran_size: %ldM \tchunk_size: %ldM \t", - result[i].bad?"*BAD* ":" ", result[i].gran_sizek >> 10, - result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose RAM: %s%ldM\n", - result[i].num_reg, result[i].bad?"-":"", - result[i].lose_cover_sizek >> 10); + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "%sgran_size: %ld%c \tchunk_size: %ld%c \t", + result[i].bad?"*BAD*":" ", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose cover RAM: %s%ld%c\n", + result[i].num_reg, result[i].bad?"-":"", + lose_base, lose_factor); } /* try to find the optimal index */ @@ -1339,10 +1440,8 @@ static int __init mtrr_cleanup(unsigned address_bits) nr_mtrr_spare_reg = num_var_ranges - 1; num_reg_good = -1; for (i = num_var_ranges - nr_mtrr_spare_reg; i > 0; i--) { - if (!min_loss_pfn[i]) { + if (!min_loss_pfn[i]) num_reg_good = i; - break; - } } index_good = -1; @@ -1358,21 +1457,26 @@ static int __init mtrr_cleanup(unsigned address_bits) } if (index_good != -1) { + char gran_factor, chunk_factor, lose_factor; + unsigned long gran_base, chunk_base, lose_base; + printk(KERN_INFO "Found optimal setting for mtrr clean up\n"); i = index_good; - printk(KERN_INFO "gran_size: %ldM \tchunk_size: %ldM \t", - result[i].gran_sizek >> 10, - result[i].chunk_sizek >> 10); - printk(KERN_CONT "num_reg: %d \tlose RAM: %ldM\n", - result[i].num_reg, - result[i].lose_cover_sizek >> 10); + gran_base = to_size_factor(result[i].gran_sizek, &gran_factor), + chunk_base = to_size_factor(result[i].chunk_sizek, &chunk_factor), + lose_base = to_size_factor(result[i].lose_cover_sizek, &lose_factor), + printk(KERN_INFO "gran_size: %ld%c \tchunk_size: %ld%c \t", + gran_base, gran_factor, chunk_base, chunk_factor); + printk(KERN_CONT "num_reg: %d \tlose RAM: %ld%c\n", + result[i].num_reg, lose_base, lose_factor); /* convert ranges to var ranges state */ chunk_size = result[i].chunk_sizek; chunk_size <<= 10; gran_size = result[i].gran_sizek; gran_size <<= 10; - debug_print = 1; + debug_print++; x86_setup_var_mtrrs(range, nr_range, chunk_size, gran_size); + debug_print--; set_var_mtrr_all(address_bits); return 1; } diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index 05cc22dbd4ff..6bff382094f5 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -295,13 +295,19 @@ static int setup_k7_watchdog(unsigned nmi_hz) /* setup the timer */ wrmsr(evntsel_msr, evntsel, 0); write_watchdog_counter(perfctr_msr, "K7_PERFCTR0",nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= K7_EVNTSEL_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); + /* initialize the wd struct before enabling */ wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= K7_EVNTSEL_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + return 1; } @@ -379,13 +385,19 @@ static int setup_p6_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); nmi_hz = adjust_for_32bit_ctr(nmi_hz); write_watchdog_counter32(perfctr_msr, "P6_PERFCTR0",nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= P6_EVNTSEL0_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); + /* initialize the wd struct before enabling */ wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= P6_EVNTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); + return 1; } @@ -432,6 +444,27 @@ static const struct wd_ops p6_wd_ops = { #define P4_CCCR_ENABLE (1 << 12) #define P4_CCCR_OVF (1 << 31) +#define P4_CONTROLS 18 +static unsigned int p4_controls[18] = { + MSR_P4_BPU_CCCR0, + MSR_P4_BPU_CCCR1, + MSR_P4_BPU_CCCR2, + MSR_P4_BPU_CCCR3, + MSR_P4_MS_CCCR0, + MSR_P4_MS_CCCR1, + MSR_P4_MS_CCCR2, + MSR_P4_MS_CCCR3, + MSR_P4_FLAME_CCCR0, + MSR_P4_FLAME_CCCR1, + MSR_P4_FLAME_CCCR2, + MSR_P4_FLAME_CCCR3, + MSR_P4_IQ_CCCR0, + MSR_P4_IQ_CCCR1, + MSR_P4_IQ_CCCR2, + MSR_P4_IQ_CCCR3, + MSR_P4_IQ_CCCR4, + MSR_P4_IQ_CCCR5, +}; /* * Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter * CRU_ESCR0 (with any non-null event selector) through a complemented @@ -473,6 +506,26 @@ static int setup_p4_watchdog(unsigned nmi_hz) evntsel_msr = MSR_P4_CRU_ESCR0; cccr_msr = MSR_P4_IQ_CCCR0; cccr_val = P4_CCCR_OVF_PMI0 | P4_CCCR_ESCR_SELECT(4); + + /* + * If we're on the kdump kernel or other situation, we may + * still have other performance counter registers set to + * interrupt and they'll keep interrupting forever because + * of the P4_CCCR_OVF quirk. So we need to ACK all the + * pending interrupts and disable all the registers here, + * before reenabling the NMI delivery. Refer to p4_rearm() + * about the P4_CCCR_OVF quirk. + */ + if (reset_devices) { + unsigned int low, high; + int i; + + for (i = 0; i < P4_CONTROLS; i++) { + rdmsr(p4_controls[i], low, high); + low &= ~(P4_CCCR_ENABLE | P4_CCCR_OVF); + wrmsr(p4_controls[i], low, high); + } + } } else { /* logical cpu 1 */ perfctr_msr = MSR_P4_IQ_PERFCTR1; @@ -499,12 +552,17 @@ static int setup_p4_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); wrmsr(cccr_msr, cccr_val, 0); write_watchdog_counter(perfctr_msr, "P4_IQ_COUNTER0", nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - cccr_val |= P4_CCCR_ENABLE; - wrmsr(cccr_msr, cccr_val, 0); + wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = cccr_msr; + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + cccr_val |= P4_CCCR_ENABLE; + wrmsr(cccr_msr, cccr_val, 0); return 1; } @@ -620,13 +678,17 @@ static int setup_intel_arch_watchdog(unsigned nmi_hz) wrmsr(evntsel_msr, evntsel, 0); nmi_hz = adjust_for_32bit_ctr(nmi_hz); write_watchdog_counter32(perfctr_msr, "INTEL_ARCH_PERFCTR0", nmi_hz); - apic_write(APIC_LVTPC, APIC_DM_NMI); - evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; - wrmsr(evntsel_msr, evntsel, 0); wd->perfctr_msr = perfctr_msr; wd->evntsel_msr = evntsel_msr; wd->cccr_msr = 0; /* unused */ + + /* ok, everything is initialized, announce that we're set */ + cpu_nmi_set_wd_enabled(); + + apic_write(APIC_LVTPC, APIC_DM_NMI); + evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsr(evntsel_msr, evntsel, 0); intel_arch_wd_ops.checkbit = 1ULL << (eax.split.bit_width - 1); return 1; } diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c index b911a2c61b8f..52b3fefbd5af 100644 --- a/arch/x86/kernel/cpu/transmeta.c +++ b/arch/x86/kernel/cpu/transmeta.c @@ -5,6 +5,18 @@ #include <asm/msr.h> #include "cpu.h" +static void __cpuinit early_init_transmeta(struct cpuinfo_x86 *c) +{ + u32 xlvl; + + /* Transmeta-defined flags: level 0x80860001 */ + xlvl = cpuid_eax(0x80860000); + if ((xlvl & 0xffff0000) == 0x80860000) { + if (xlvl >= 0x80860001) + c->x86_capability[2] = cpuid_edx(0x80860001); + } +} + static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) { unsigned int cap_mask, uk, max, dummy; @@ -12,7 +24,8 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) unsigned int cpu_rev, cpu_freq = 0, cpu_flags, new_cpu_rev; char cpu_info[65]; - get_model_name(c); /* Same as AMD/Cyrix */ + early_init_transmeta(c); + display_cacheinfo(c); /* Print CMS and CPU revision */ @@ -85,23 +98,12 @@ static void __cpuinit init_transmeta(struct cpuinfo_x86 *c) #endif } -static void __cpuinit transmeta_identify(struct cpuinfo_x86 *c) -{ - u32 xlvl; - - /* Transmeta-defined flags: level 0x80860001 */ - xlvl = cpuid_eax(0x80860000); - if ((xlvl & 0xffff0000) == 0x80860000) { - if (xlvl >= 0x80860001) - c->x86_capability[2] = cpuid_edx(0x80860001); - } -} - static struct cpu_dev transmeta_cpu_dev __cpuinitdata = { .c_vendor = "Transmeta", .c_ident = { "GenuineTMx86", "TransmetaCPU" }, + .c_early_init = early_init_transmeta, .c_init = init_transmeta, - .c_identify = transmeta_identify, + .c_x86_vendor = X86_VENDOR_TRANSMETA, }; -cpu_vendor_dev_register(X86_VENDOR_TRANSMETA, &transmeta_cpu_dev); +cpu_dev_register(transmeta_cpu_dev); diff --git a/arch/x86/kernel/cpu/umc.c b/arch/x86/kernel/cpu/umc.c index b1fc90989d75..e777f79e0960 100644 --- a/arch/x86/kernel/cpu/umc.c +++ b/arch/x86/kernel/cpu/umc.c @@ -19,7 +19,8 @@ static struct cpu_dev umc_cpu_dev __cpuinitdata = { } }, }, + .c_x86_vendor = X86_VENDOR_UMC, }; -cpu_vendor_dev_register(X86_VENDOR_UMC, &umc_cpu_dev); +cpu_dev_register(umc_cpu_dev); |