diff options
Diffstat (limited to 'arch/x86/kernel/cpu/perf_event_p6.c')
| -rw-r--r-- | arch/x86/kernel/cpu/perf_event_p6.c | 157 |
1 files changed, 157 insertions, 0 deletions
diff --git a/arch/x86/kernel/cpu/perf_event_p6.c b/arch/x86/kernel/cpu/perf_event_p6.c new file mode 100644 index 000000000000..1ca5ba078afd --- /dev/null +++ b/arch/x86/kernel/cpu/perf_event_p6.c @@ -0,0 +1,157 @@ +#ifdef CONFIG_CPU_SUP_INTEL + +/* + * Not sure about some of these + */ +static const u64 p6_perfmon_event_map[] = +{ + [PERF_COUNT_HW_CPU_CYCLES] = 0x0079, + [PERF_COUNT_HW_INSTRUCTIONS] = 0x00c0, + [PERF_COUNT_HW_CACHE_REFERENCES] = 0x0f2e, + [PERF_COUNT_HW_CACHE_MISSES] = 0x012e, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 0x00c4, + [PERF_COUNT_HW_BRANCH_MISSES] = 0x00c5, + [PERF_COUNT_HW_BUS_CYCLES] = 0x0062, +}; + +static u64 p6_pmu_event_map(int hw_event) +{ + return p6_perfmon_event_map[hw_event]; +} + +/* + * Event setting that is specified not to count anything. + * We use this to effectively disable a counter. + * + * L2_RQSTS with 0 MESI unit mask. + */ +#define P6_NOP_EVENT 0x0000002EULL + +static u64 p6_pmu_raw_event(u64 hw_event) +{ +#define P6_EVNTSEL_EVENT_MASK 0x000000FFULL +#define P6_EVNTSEL_UNIT_MASK 0x0000FF00ULL +#define P6_EVNTSEL_EDGE_MASK 0x00040000ULL +#define P6_EVNTSEL_INV_MASK 0x00800000ULL +#define P6_EVNTSEL_REG_MASK 0xFF000000ULL + +#define P6_EVNTSEL_MASK \ + (P6_EVNTSEL_EVENT_MASK | \ + P6_EVNTSEL_UNIT_MASK | \ + P6_EVNTSEL_EDGE_MASK | \ + P6_EVNTSEL_INV_MASK | \ + P6_EVNTSEL_REG_MASK) + + return hw_event & P6_EVNTSEL_MASK; +} + +static struct event_constraint p6_event_constraints[] = +{ + INTEL_EVENT_CONSTRAINT(0xc1, 0x1), /* FLOPS */ + INTEL_EVENT_CONSTRAINT(0x10, 0x1), /* FP_COMP_OPS_EXE */ + INTEL_EVENT_CONSTRAINT(0x11, 0x1), /* FP_ASSIST */ + INTEL_EVENT_CONSTRAINT(0x12, 0x2), /* MUL */ + INTEL_EVENT_CONSTRAINT(0x13, 0x2), /* DIV */ + INTEL_EVENT_CONSTRAINT(0x14, 0x1), /* CYCLES_DIV_BUSY */ + EVENT_CONSTRAINT_END +}; + +static void p6_pmu_disable_all(void) +{ + u64 val; + + /* p6 only has one enable register */ + rdmsrl(MSR_P6_EVNTSEL0, val); + val &= ~ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsrl(MSR_P6_EVNTSEL0, val); +} + +static void p6_pmu_enable_all(void) +{ + unsigned long val; + + /* p6 only has one enable register */ + rdmsrl(MSR_P6_EVNTSEL0, val); + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + wrmsrl(MSR_P6_EVNTSEL0, val); +} + +static inline void +p6_pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + u64 val = P6_NOP_EVENT; + + if (cpuc->enabled) + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + + (void)checking_wrmsrl(hwc->config_base + idx, val); +} + +static void p6_pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + u64 val; + + val = hwc->config; + if (cpuc->enabled) + val |= ARCH_PERFMON_EVENTSEL0_ENABLE; + + (void)checking_wrmsrl(hwc->config_base + idx, val); +} + +static __initconst struct x86_pmu p6_pmu = { + .name = "p6", + .handle_irq = x86_pmu_handle_irq, + .disable_all = p6_pmu_disable_all, + .enable_all = p6_pmu_enable_all, + .enable = p6_pmu_enable_event, + .disable = p6_pmu_disable_event, + .eventsel = MSR_P6_EVNTSEL0, + .perfctr = MSR_P6_PERFCTR0, + .event_map = p6_pmu_event_map, + .raw_event = p6_pmu_raw_event, + .max_events = ARRAY_SIZE(p6_perfmon_event_map), + .apic = 1, + .max_period = (1ULL << 31) - 1, + .version = 0, + .num_events = 2, + /* + * Events have 40 bits implemented. However they are designed such + * that bits [32-39] are sign extensions of bit 31. As such the + * effective width of a event for P6-like PMU is 32 bits only. + * + * See IA-32 Intel Architecture Software developer manual Vol 3B + */ + .event_bits = 32, + .event_mask = (1ULL << 32) - 1, + .get_event_constraints = x86_get_event_constraints, + .event_constraints = p6_event_constraints, +}; + +static __init int p6_pmu_init(void) +{ + switch (boot_cpu_data.x86_model) { + case 1: + case 3: /* Pentium Pro */ + case 5: + case 6: /* Pentium II */ + case 7: + case 8: + case 11: /* Pentium III */ + case 9: + case 13: + /* Pentium M */ + break; + default: + pr_cont("unsupported p6 CPU model %d ", + boot_cpu_data.x86_model); + return -ENODEV; + } + + x86_pmu = p6_pmu; + + return 0; +} + +#endif /* CONFIG_CPU_SUP_INTEL */ |