diff options
Diffstat (limited to 'arch/x86/kernel/cpu/mcheck/therm_throt.c')
| -rw-r--r-- | arch/x86/kernel/cpu/mcheck/therm_throt.c | 106 |
1 files changed, 102 insertions, 4 deletions
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 7b1ae2e20ba5..bff8dd191dd5 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -13,13 +13,23 @@ * Credits: Adapted from Zwane Mwaikambo's original code in mce_intel.c. * Inspired by Ross Biro's and Al Borchers' counter code. */ +#include <linux/interrupt.h> #include <linux/notifier.h> #include <linux/jiffies.h> +#include <linux/kernel.h> #include <linux/percpu.h> #include <linux/sysdev.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/smp.h> #include <linux/cpu.h> -#include <asm/therm_throt.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/apic.h> +#include <asm/idle.h> +#include <asm/mce.h> +#include <asm/msr.h> /* How long to wait between reporting thermal events */ #define CHECK_INTERVAL (300 * HZ) @@ -27,7 +37,7 @@ static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES; static DEFINE_PER_CPU(unsigned long, thermal_throttle_count); -atomic_t therm_throt_en = ATOMIC_INIT(0); +static atomic_t therm_throt_en = ATOMIC_INIT(0); #ifdef CONFIG_SYSFS #define define_therm_throt_sysdev_one_ro(_name) \ @@ -82,7 +92,7 @@ static struct attribute_group thermal_throttle_attr_group = { * 1 : Event should be logged further, and a message has been * printed to the syslog. */ -int therm_throt_process(int curr) +static int therm_throt_process(int curr) { unsigned int cpu = smp_processor_id(); __u64 tmp_jiffs = get_jiffies_64(); @@ -186,6 +196,94 @@ static __init int thermal_throttle_init_device(void) return 0; } - device_initcall(thermal_throttle_init_device); + #endif /* CONFIG_SYSFS */ + +/* Thermal transition interrupt handler */ +static void intel_thermal_interrupt(void) +{ + __u64 msr_val; + + rdmsrl(MSR_IA32_THERM_STATUS, msr_val); + if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT)) + mce_log_therm_throt_event(msr_val); +} + +static void unexpected_thermal_interrupt(void) +{ + printk(KERN_ERR "CPU%d: Unexpected LVT TMR interrupt!\n", + smp_processor_id()); + add_taint(TAINT_MACHINE_CHECK); +} + +static void (*smp_thermal_vector)(void) = unexpected_thermal_interrupt; + +asmlinkage void smp_thermal_interrupt(struct pt_regs *regs) +{ + exit_idle(); + irq_enter(); + inc_irq_stat(irq_thermal_count); + smp_thermal_vector(); + irq_exit(); + /* Ack only at the end to avoid potential reentry */ + ack_APIC_irq(); +} + +void intel_init_thermal(struct cpuinfo_x86 *c) +{ + unsigned int cpu = smp_processor_id(); + int tm2 = 0; + u32 l, h; + + /* Thermal monitoring depends on ACPI and clock modulation*/ + if (!cpu_has(c, X86_FEATURE_ACPI) || !cpu_has(c, X86_FEATURE_ACC)) + return; + + /* + * First check if its enabled already, in which case there might + * be some SMM goo which handles it, so we can't even put a handler + * since it might be delivered via SMI already: + */ + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + h = apic_read(APIC_LVTTHMR); + if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { + printk(KERN_DEBUG + "CPU%d: Thermal monitoring handled by SMI\n", cpu); + return; + } + + if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2)) + tm2 = 1; + + /* Check whether a vector already exists */ + if (h & APIC_VECTOR_MASK) { + printk(KERN_DEBUG + "CPU%d: Thermal LVT vector (%#x) already installed\n", + cpu, (h & APIC_VECTOR_MASK)); + return; + } + + /* We'll mask the thermal vector in the lapic till we're ready: */ + h = THERMAL_APIC_VECTOR | APIC_DM_FIXED | APIC_LVT_MASKED; + apic_write(APIC_LVTTHMR, h); + + rdmsr(MSR_IA32_THERM_INTERRUPT, l, h); + wrmsr(MSR_IA32_THERM_INTERRUPT, + l | (THERM_INT_LOW_ENABLE | THERM_INT_HIGH_ENABLE), h); + + smp_thermal_vector = intel_thermal_interrupt; + + rdmsr(MSR_IA32_MISC_ENABLE, l, h); + wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h); + + /* Unmask the thermal vector: */ + l = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); + + printk(KERN_INFO "CPU%d: Thermal monitoring enabled (%s)\n", + cpu, tm2 ? "TM2" : "TM1"); + + /* enable thermal throttle processing */ + atomic_set(&therm_throt_en, 1); +} |