summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic/apic.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/apic/apic.c')
-rw-r--r--arch/x86/kernel/apic/apic.c311
1 files changed, 191 insertions, 120 deletions
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 60df2efd7c80..076d3881f3da 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -100,6 +100,29 @@ early_param("lapic", parse_lapic);
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
+/*
+ * Handle interrupt mode configuration register (IMCR).
+ * This register controls whether the interrupt signals
+ * that reach the BSP come from the master PIC or from the
+ * local APIC. Before entering Symmetric I/O Mode, either
+ * the BIOS or the operating system must switch out of
+ * PIC Mode by changing the IMCR.
+ */
+static inline void imcr_pic_to_apic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go through APIC */
+ outb(0x01, 0x23);
+}
+
+static inline void imcr_apic_to_pic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go directly to BSP */
+ outb(0x00, 0x23);
+}
#endif
#ifdef CONFIG_X86_64
@@ -113,13 +136,19 @@ static __init int setup_apicpmtimer(char *s)
__setup("apicpmtimer", setup_apicpmtimer);
#endif
+int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
-int x2apic;
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
+ if (x2apic_enabled()) {
+ pr_warning("Bios already enabled x2apic, "
+ "can't enforce nox2apic");
+ return 0;
+ }
+
disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
@@ -211,6 +240,31 @@ static int modern_apic(void)
return lapic_get_version() >= 0x14;
}
+/*
+ * bare function to substitute write operation
+ * and it's _that_ fast :)
+ */
+static void native_apic_write_dummy(u32 reg, u32 v)
+{
+ WARN_ON_ONCE((cpu_has_apic || !disable_apic));
+}
+
+static u32 native_apic_read_dummy(u32 reg)
+{
+ WARN_ON_ONCE((cpu_has_apic && !disable_apic));
+ return 0;
+}
+
+/*
+ * right after this call apic->write/read doesn't do anything
+ * note that there is no restore operation it works one way
+ */
+void apic_disable(void)
+{
+ apic->read = native_apic_read_dummy;
+ apic->write = native_apic_write_dummy;
+}
+
void native_apic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
@@ -350,7 +404,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
{
- unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0);
unsigned int v = (mask << 16) | (msg_type << 8) | vector;
apic_write(reg, v);
@@ -817,7 +871,7 @@ void clear_local_APIC(void)
u32 v;
/* APIC hasn't been mapped yet */
- if (!x2apic && !apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
maxlvt = lapic_get_maxlvt();
@@ -1290,7 +1344,7 @@ void check_x2apic(void)
{
if (x2apic_enabled()) {
pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
- x2apic_preenabled = x2apic = 1;
+ x2apic_preenabled = x2apic_mode = 1;
}
}
@@ -1298,7 +1352,7 @@ void enable_x2apic(void)
{
int msr, msr2;
- if (!x2apic)
+ if (!x2apic_mode)
return;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
@@ -1307,6 +1361,7 @@ void enable_x2apic(void)
wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
}
}
+#endif /* CONFIG_X86_X2APIC */
void __init enable_IR_x2apic(void)
{
@@ -1315,32 +1370,21 @@ void __init enable_IR_x2apic(void)
unsigned long flags;
struct IO_APIC_route_entry **ioapic_entries = NULL;
- if (!cpu_has_x2apic)
- return;
-
- if (!x2apic_preenabled && disable_x2apic) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of nox2apic\n");
- return;
+ ret = dmar_table_init();
+ if (ret) {
+ pr_debug("dmar_table_init() failed with %d:\n", ret);
+ goto ir_failed;
}
- if (x2apic_preenabled && disable_x2apic)
- panic("Bios already enabled x2apic, can't enforce nox2apic");
-
- if (!x2apic_preenabled && skip_ioapic_setup) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of skipping io-apic setup\n");
- return;
+ if (!intr_remapping_supported()) {
+ pr_debug("intr-remapping not supported\n");
+ goto ir_failed;
}
- ret = dmar_table_init();
- if (ret) {
- pr_info("dmar_table_init() failed with %d:\n", ret);
- if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
- else
- pr_info("Not enabling x2apic,Intr-remapping\n");
+ if (!x2apic_preenabled && skip_ioapic_setup) {
+ pr_info("Skipped enabling intr-remap because of skipping "
+ "io-apic setup\n");
return;
}
@@ -1360,19 +1404,16 @@ void __init enable_IR_x2apic(void)
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (ret && x2apic_preenabled) {
- local_irq_restore(flags);
- panic("x2apic enabled by bios. But IR enabling failed");
- }
-
+ ret = enable_intr_remapping(x2apic_supported());
if (ret)
goto end_restore;
- if (!x2apic) {
- x2apic = 1;
+ pr_info("Enabled Interrupt-remapping\n");
+
+ if (x2apic_supported() && !x2apic_mode) {
+ x2apic_mode = 1;
enable_x2apic();
+ pr_info("Enabled x2apic\n");
}
end_restore:
@@ -1381,37 +1422,34 @@ end_restore:
* IR enabling failed
*/
restore_IO_APIC_setup(ioapic_entries);
- else
- reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries);
unmask_8259A();
local_irq_restore(flags);
end:
- if (!ret) {
- if (!x2apic_preenabled)
- pr_info("Enabled x2apic and interrupt-remapping\n");
- else
- pr_info("Enabled Interrupt-remapping\n");
- } else
- pr_err("Failed to enable Interrupt-remapping and x2apic\n");
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
+
+ if (!ret)
+ return;
+
+ir_failed:
+ if (x2apic_preenabled)
+ panic("x2apic enabled by bios. But IR enabling failed");
+ else if (cpu_has_x2apic)
+ pr_info("Not enabling x2apic,Intr-remapping\n");
#else
if (!cpu_has_x2apic)
return;
if (x2apic_preenabled)
panic("x2apic enabled prior OS handover,"
- " enable CONFIG_INTR_REMAP");
-
- pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
- " and x2apic\n");
+ " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
#endif
return;
}
-#endif /* CONFIG_X86_X2APIC */
+
#ifdef CONFIG_X86_64
/*
@@ -1428,7 +1466,6 @@ static int __init detect_init_APIC(void)
}
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
- boot_cpu_physical_apicid = 0;
return 0;
}
#else
@@ -1542,32 +1579,49 @@ void __init early_init_lapic_mapping(void)
*/
void __init init_apic_mappings(void)
{
- if (x2apic) {
+ unsigned int new_apicid;
+
+ if (x2apic_mode) {
boot_cpu_physical_apicid = read_apic_id();
return;
}
- /*
- * If no local APIC can be found then set up a fake all
- * zeroes page to simulate the local APIC and another
- * one for the IO-APIC.
- */
+ /* If no local APIC can be found return early */
if (!smp_found_config && detect_init_APIC()) {
- apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
- apic_phys = __pa(apic_phys);
- } else
+ /* lets NOP'ify apic operations */
+ pr_info("APIC: disable apic facility\n");
+ apic_disable();
+ } else {
apic_phys = mp_lapic_addr;
- set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
- apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
- APIC_BASE, apic_phys);
+ /*
+ * acpi lapic path already maps that address in
+ * acpi_register_lapic_address()
+ */
+ if (!acpi_lapic)
+ set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+
+ apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
+ APIC_BASE, apic_phys);
+ }
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = read_apic_id();
+ new_apicid = read_apic_id();
+ if (boot_cpu_physical_apicid != new_apicid) {
+ boot_cpu_physical_apicid = new_apicid;
+ /*
+ * yeah -- we lie about apic_version
+ * in case if apic was disabled via boot option
+ * but it's not a problem for SMP compiled kernel
+ * since smp_sanity_check is prepared for such a case
+ * and disable smp mode
+ */
+ apic_version[new_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+ }
}
/*
@@ -1736,8 +1790,7 @@ void __init connect_bsp_APIC(void)
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
+ imcr_pic_to_apic();
}
#endif
if (apic->enable_apic_mode)
@@ -1765,8 +1818,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
+ imcr_apic_to_pic();
return;
}
#endif
@@ -1972,10 +2024,10 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
local_irq_save(flags);
disable_local_APIC();
-#ifdef CONFIG_INTR_REMAP
+
if (intr_remapping_enabled)
disable_intr_remapping();
-#endif
+
local_irq_restore(flags);
return 0;
}
@@ -1985,42 +2037,34 @@ static int lapic_resume(struct sys_device *dev)
unsigned int l, h;
unsigned long flags;
int maxlvt;
-
-#ifdef CONFIG_INTR_REMAP
- int ret;
+ int ret = 0;
struct IO_APIC_route_entry **ioapic_entries = NULL;
if (!apic_pm_state.active)
return 0;
local_irq_save(flags);
- if (x2apic) {
+ if (intr_remapping_enabled) {
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
WARN(1, "Alloc ioapic_entries in lapic resume failed.");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto restore;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
WARN(1, "Saving IO-APIC state failed: %d\n", ret);
free_ioapic_entries(ioapic_entries);
- return ret;
+ goto restore;
}
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- enable_x2apic();
}
-#else
- if (!apic_pm_state.active)
- return 0;
- local_irq_save(flags);
- if (x2apic)
+ if (x2apic_mode)
enable_x2apic();
-#endif
-
else {
/*
* Make sure the APICBASE points to the right address
@@ -2058,21 +2102,16 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
-#ifdef CONFIG_INTR_REMAP
- if (intr_remapping_enabled)
- reenable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (x2apic) {
+ if (intr_remapping_enabled) {
+ reenable_intr_remapping(x2apic_mode);
unmask_8259A();
restore_IO_APIC_setup(ioapic_entries);
free_ioapic_entries(ioapic_entries);
}
-#endif
-
+restore:
local_irq_restore(flags);
-
- return 0;
+ return ret;
}
/*
@@ -2120,31 +2159,14 @@ static void apic_pm_activate(void) { }
#endif /* CONFIG_PM */
#ifdef CONFIG_X86_64
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
+
+static int __cpuinit apic_cluster_num(void)
{
int i, clusters, zeros;
unsigned id;
u16 *bios_cpu_apicid;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /*
- * there is not this kind of box with AMD CPU yet.
- * Some AMD box with quadcore cpu and 8 sockets apicid
- * will be [4, 0x23] or [8, 0x27] could be thought to
- * vsmp box still need checking...
- */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
- return 0;
-
bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
@@ -2180,18 +2202,67 @@ __cpuinit int apic_is_clustered_box(void)
++zeros;
}
- /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
- * not guaranteed to be synced between boards
- */
- if (is_vsmp_box() && clusters > 1)
+ return clusters;
+}
+
+static int __cpuinitdata multi_checked;
+static int __cpuinitdata multi;
+
+static int __cpuinit set_multi(const struct dmi_system_id *d)
+{
+ if (multi)
+ return 0;
+ pr_info("APIC: %s detected, Multi Chassis\n", d->ident);
+ multi = 1;
+ return 0;
+}
+
+static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = {
+ {
+ .callback = set_multi,
+ .ident = "IBM System Summit2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"),
+ },
+ },
+ {}
+};
+
+static void __cpuinit dmi_check_multi(void)
+{
+ if (multi_checked)
+ return;
+
+ dmi_check_system(multi_dmi_table);
+ multi_checked = 1;
+}
+
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis.
+ * Use DMI to check them
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+ dmi_check_multi();
+ if (multi)
return 1;
+ if (!is_vsmp_box())
+ return 0;
+
/*
- * If clusters > 2, then should be multi-chassis.
- * May have to revisit this when multi-core + hyperthreaded CPUs come
- * out, but AFAIK this will work even for them.
+ * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+ * not guaranteed to be synced between boards
*/
- return (clusters > 2);
+ if (apic_cluster_num() > 1)
+ return 1;
+
+ return 0;
}
#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 16:48:35 +0000