diff options
Diffstat (limited to 'arch/x86/kernel/alternative.c')
-rw-r--r-- | arch/x86/kernel/alternative.c | 201 |
1 files changed, 154 insertions, 47 deletions
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c index 9a79c7808f9c..7b9b49dfc05a 100644 --- a/arch/x86/kernel/alternative.c +++ b/arch/x86/kernel/alternative.c @@ -12,6 +12,7 @@ #include <linux/slab.h> #include <linux/kdebug.h> #include <linux/kprobes.h> +#include <linux/mmu_context.h> #include <asm/text-patching.h> #include <asm/alternative.h> #include <asm/sections.h> @@ -264,7 +265,7 @@ static void __init_or_module add_nops(void *insns, unsigned int len) extern struct alt_instr __alt_instructions[], __alt_instructions_end[]; extern s32 __smp_locks[], __smp_locks_end[]; -void *text_poke_early(void *addr, const void *opcode, size_t len); +void text_poke_early(void *addr, const void *opcode, size_t len); /* * Are we looking at a near JMP with a 1 or 4-byte displacement. @@ -666,16 +667,136 @@ void __init alternative_instructions(void) * instructions. And on the local CPU you need to be protected again NMI or MCE * handlers seeing an inconsistent instruction while you patch. */ -void *__init_or_module text_poke_early(void *addr, const void *opcode, - size_t len) +void __init_or_module text_poke_early(void *addr, const void *opcode, + size_t len) { unsigned long flags; + + if (boot_cpu_has(X86_FEATURE_NX) && + is_module_text_address((unsigned long)addr)) { + /* + * Modules text is marked initially as non-executable, so the + * code cannot be running and speculative code-fetches are + * prevented. Just change the code. + */ + memcpy(addr, opcode, len); + } else { + local_irq_save(flags); + memcpy(addr, opcode, len); + local_irq_restore(flags); + sync_core(); + + /* + * Could also do a CLFLUSH here to speed up CPU recovery; but + * that causes hangs on some VIA CPUs. + */ + } +} + +__ro_after_init struct mm_struct *poking_mm; +__ro_after_init unsigned long poking_addr; + +static void *__text_poke(void *addr, const void *opcode, size_t len) +{ + bool cross_page_boundary = offset_in_page(addr) + len > PAGE_SIZE; + struct page *pages[2] = {NULL}; + temp_mm_state_t prev; + unsigned long flags; + pte_t pte, *ptep; + spinlock_t *ptl; + pgprot_t pgprot; + + /* + * While boot memory allocator is running we cannot use struct pages as + * they are not yet initialized. There is no way to recover. + */ + BUG_ON(!after_bootmem); + + if (!core_kernel_text((unsigned long)addr)) { + pages[0] = vmalloc_to_page(addr); + if (cross_page_boundary) + pages[1] = vmalloc_to_page(addr + PAGE_SIZE); + } else { + pages[0] = virt_to_page(addr); + WARN_ON(!PageReserved(pages[0])); + if (cross_page_boundary) + pages[1] = virt_to_page(addr + PAGE_SIZE); + } + /* + * If something went wrong, crash and burn since recovery paths are not + * implemented. + */ + BUG_ON(!pages[0] || (cross_page_boundary && !pages[1])); + local_irq_save(flags); - memcpy(addr, opcode, len); + + /* + * Map the page without the global bit, as TLB flushing is done with + * flush_tlb_mm_range(), which is intended for non-global PTEs. + */ + pgprot = __pgprot(pgprot_val(PAGE_KERNEL) & ~_PAGE_GLOBAL); + + /* + * The lock is not really needed, but this allows to avoid open-coding. + */ + ptep = get_locked_pte(poking_mm, poking_addr, &ptl); + + /* + * This must not fail; preallocated in poking_init(). + */ + VM_BUG_ON(!ptep); + + pte = mk_pte(pages[0], pgprot); + set_pte_at(poking_mm, poking_addr, ptep, pte); + + if (cross_page_boundary) { + pte = mk_pte(pages[1], pgprot); + set_pte_at(poking_mm, poking_addr + PAGE_SIZE, ptep + 1, pte); + } + + /* + * Loading the temporary mm behaves as a compiler barrier, which + * guarantees that the PTE will be set at the time memcpy() is done. + */ + prev = use_temporary_mm(poking_mm); + + kasan_disable_current(); + memcpy((u8 *)poking_addr + offset_in_page(addr), opcode, len); + kasan_enable_current(); + + /* + * Ensure that the PTE is only cleared after the instructions of memcpy + * were issued by using a compiler barrier. + */ + barrier(); + + pte_clear(poking_mm, poking_addr, ptep); + if (cross_page_boundary) + pte_clear(poking_mm, poking_addr + PAGE_SIZE, ptep + 1); + + /* + * Loading the previous page-table hierarchy requires a serializing + * instruction that already allows the core to see the updated version. + * Xen-PV is assumed to serialize execution in a similar manner. + */ + unuse_temporary_mm(prev); + + /* + * Flushing the TLB might involve IPIs, which would require enabled + * IRQs, but not if the mm is not used, as it is in this point. + */ + flush_tlb_mm_range(poking_mm, poking_addr, poking_addr + + (cross_page_boundary ? 2 : 1) * PAGE_SIZE, + PAGE_SHIFT, false); + + /* + * If the text does not match what we just wrote then something is + * fundamentally screwy; there's nothing we can really do about that. + */ + BUG_ON(memcmp(addr, opcode, len)); + + pte_unmap_unlock(ptep, ptl); local_irq_restore(flags); - sync_core(); - /* Could also do a CLFLUSH here to speed up CPU recovery; but - that causes hangs on some VIA CPUs. */ return addr; } @@ -689,48 +810,36 @@ void *__init_or_module text_poke_early(void *addr, const void *opcode, * It means the size must be writable atomically and the address must be aligned * in a way that permits an atomic write. It also makes sure we fit on a single * page. + * + * Note that the caller must ensure that if the modified code is part of a + * module, the module would not be removed during poking. This can be achieved + * by registering a module notifier, and ordering module removal and patching + * trough a mutex. */ void *text_poke(void *addr, const void *opcode, size_t len) { - unsigned long flags; - char *vaddr; - struct page *pages[2]; - int i; - - /* - * While boot memory allocator is runnig we cannot use struct - * pages as they are not yet initialized. - */ - BUG_ON(!after_bootmem); - lockdep_assert_held(&text_mutex); - if (!core_kernel_text((unsigned long)addr)) { - pages[0] = vmalloc_to_page(addr); - pages[1] = vmalloc_to_page(addr + PAGE_SIZE); - } else { - pages[0] = virt_to_page(addr); - WARN_ON(!PageReserved(pages[0])); - pages[1] = virt_to_page(addr + PAGE_SIZE); - } - BUG_ON(!pages[0]); - local_irq_save(flags); - set_fixmap(FIX_TEXT_POKE0, page_to_phys(pages[0])); - if (pages[1]) - set_fixmap(FIX_TEXT_POKE1, page_to_phys(pages[1])); - vaddr = (char *)fix_to_virt(FIX_TEXT_POKE0); - memcpy(&vaddr[(unsigned long)addr & ~PAGE_MASK], opcode, len); - clear_fixmap(FIX_TEXT_POKE0); - if (pages[1]) - clear_fixmap(FIX_TEXT_POKE1); - local_flush_tlb(); - sync_core(); - /* Could also do a CLFLUSH here to speed up CPU recovery; but - that causes hangs on some VIA CPUs. */ - for (i = 0; i < len; i++) - BUG_ON(((char *)addr)[i] != ((char *)opcode)[i]); - local_irq_restore(flags); - return addr; + return __text_poke(addr, opcode, len); +} + +/** + * text_poke_kgdb - Update instructions on a live kernel by kgdb + * @addr: address to modify + * @opcode: source of the copy + * @len: length to copy + * + * Only atomic text poke/set should be allowed when not doing early patching. + * It means the size must be writable atomically and the address must be aligned + * in a way that permits an atomic write. It also makes sure we fit on a single + * page. + * + * Context: should only be used by kgdb, which ensures no other core is running, + * despite the fact it does not hold the text_mutex. + */ +void *text_poke_kgdb(void *addr, const void *opcode, size_t len) +{ + return __text_poke(addr, opcode, len); } static void do_sync_core(void *info) @@ -788,7 +897,7 @@ NOKPROBE_SYMBOL(poke_int3_handler); * replacing opcode * - sync cores */ -void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler) +void text_poke_bp(void *addr, const void *opcode, size_t len, void *handler) { unsigned char int3 = 0xcc; @@ -830,7 +939,5 @@ void *text_poke_bp(void *addr, const void *opcode, size_t len, void *handler) * the writing of the new instruction. */ bp_patching_in_progress = false; - - return addr; } |