diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 101 |
1 files changed, 78 insertions, 23 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 685692c94f05..ee2fb9d37745 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -16,6 +16,7 @@ config X86_64 def_bool y depends on 64BIT select X86_DEV_DMA_OPS + select ARCH_USE_CMPXCHG_LOCKREF ### Arch settings config X86 @@ -65,6 +66,7 @@ config X86 select HAVE_KERNEL_LZMA select HAVE_KERNEL_XZ select HAVE_KERNEL_LZO + select HAVE_KERNEL_LZ4 select HAVE_HW_BREAKPOINT select HAVE_MIXED_BREAKPOINTS_REGS select PERF_EVENTS @@ -80,8 +82,6 @@ config X86 select HAVE_USER_RETURN_NOTIFIER select ARCH_BINFMT_ELF_RANDOMIZE_PIE select HAVE_ARCH_JUMP_LABEL - select HAVE_TEXT_POKE_SMP - select HAVE_GENERIC_HARDIRQS select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select SPARSE_IRQ select GENERIC_FIND_FIRST_BIT @@ -102,6 +102,7 @@ config X86 select HAVE_ARCH_SECCOMP_FILTER select BUILDTIME_EXTABLE_SORT select GENERIC_CMOS_UPDATE + select HAVE_ARCH_SOFT_DIRTY select CLOCKSOURCE_WATCHDOG select GENERIC_CLOCKEVENTS select ARCH_CLOCKSOURCE_DATA if X86_64 @@ -121,6 +122,7 @@ config X86 select OLD_SIGACTION if X86_32 select COMPAT_OLD_SIGACTION if IA32_EMULATION select RTC_LIB + select HAVE_DEBUG_STACKOVERFLOW config INSTRUCTION_DECODER def_bool y @@ -207,6 +209,12 @@ config ARCH_HIBERNATION_POSSIBLE config ARCH_SUSPEND_POSSIBLE def_bool y +config ARCH_WANT_HUGE_PMD_SHARE + def_bool y + +config ARCH_WANT_GENERAL_HUGETLB + def_bool y + config ZONE_DMA32 bool default X86_64 @@ -336,6 +344,7 @@ config X86_EXTENDED_PLATFORM If you enable this option then you'll be able to select support for the following (non-PC) 32 bit x86 platforms: + Goldfish (Android emulator) AMD Elan NUMAQ (IBM/Sequent) RDC R-321x SoC @@ -410,6 +419,7 @@ config X86_UV config X86_GOLDFISH bool "Goldfish (Virtual Platform)" depends on X86_32 + depends on X86_EXTENDED_PLATFORM ---help--- Enable support for the Goldfish virtual platform used primarily for Android development. Unless you are building for the Android @@ -471,11 +481,12 @@ config X86_INTEL_LPSS bool "Intel Low Power Subsystem Support" depends on ACPI select COMMON_CLK + select PINCTRL ---help--- Select to build support for Intel Low Power Subsystem such as found on Intel Lynxpoint PCH. Selecting this option enables - things like clock tree (common clock framework) which are needed - by the LPSS peripheral drivers. + things like clock tree (common clock framework) and pincontrol + which are needed by the LPSS peripheral drivers. config X86_RDC321X bool "RDC R-321x SoC" @@ -621,6 +632,7 @@ config PARAVIRT_DEBUG config PARAVIRT_SPINLOCKS bool "Paravirtualization layer for spinlocks" depends on PARAVIRT && SMP + select UNINLINE_SPIN_UNLOCK ---help--- Paravirtualized spinlocks allow a pvops backend to replace the spinlock implementation with something virtualization-friendly @@ -645,6 +657,15 @@ config KVM_GUEST underlying device model, the host provides the guest with timing infrastructure such as time of day, and system time +config KVM_DEBUG_FS + bool "Enable debug information for KVM Guests in debugfs" + depends on KVM_GUEST && DEBUG_FS + default n + ---help--- + This option enables collection of various statistics for KVM guest. + Statistics are displayed in debugfs filesystem. Enabling this option + may incur significant overhead. + source "arch/x86/lguest/Kconfig" config PARAVIRT_TIME_ACCOUNTING @@ -1058,8 +1079,16 @@ config MICROCODE_INTEL_LIB depends on MICROCODE_INTEL config MICROCODE_INTEL_EARLY + def_bool n + +config MICROCODE_AMD_EARLY + def_bool n + +config MICROCODE_EARLY bool "Early load microcode" - depends on MICROCODE_INTEL && BLK_DEV_INITRD + depends on MICROCODE=y && BLK_DEV_INITRD + select MICROCODE_INTEL_EARLY if MICROCODE_INTEL + select MICROCODE_AMD_EARLY if MICROCODE_AMD default y help This option provides functionality to read additional microcode data @@ -1067,10 +1096,6 @@ config MICROCODE_INTEL_EARLY microcode to CPU's as early as possible. No functional change if no microcode data is glued to the initrd, therefore it's safe to say Y. -config MICROCODE_EARLY - def_bool y - depends on MICROCODE_INTEL_EARLY - config X86_MSR tristate "/dev/cpu/*/msr - Model-specific register support" ---help--- @@ -1329,8 +1354,12 @@ config ARCH_SELECT_MEMORY_MODEL depends on ARCH_SPARSEMEM_ENABLE config ARCH_MEMORY_PROBE - def_bool y + bool "Enable sysfs memory/probe interface" depends on X86_64 && MEMORY_HOTPLUG + help + This option enables a sysfs memory/probe interface for testing. + See Documentation/memory-hotplug.txt for more information. + If you are unsure how to answer this question, answer N. config ARCH_PROC_KCORE_TEXT def_bool y @@ -1612,9 +1641,9 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. config CRASH_DUMP bool "kernel crash dumps" @@ -1701,9 +1730,10 @@ config X86_NEED_RELOCS depends on X86_32 && RELOCATABLE config PHYSICAL_ALIGN - hex "Alignment value to which kernel should be aligned" if X86_32 + hex "Alignment value to which kernel should be aligned" default "0x1000000" - range 0x2000 0x1000000 + range 0x2000 0x1000000 if X86_32 + range 0x200000 0x1000000 if X86_64 ---help--- This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an @@ -1721,11 +1751,14 @@ config PHYSICAL_ALIGN end result is that kernel runs from a physical address meeting above alignment restrictions. + On 32-bit this value must be a multiple of 0x2000. On 64-bit + this value must be a multiple of 0x200000. + Don't change this unless you know what you are doing. config HOTPLUG_CPU bool "Support for hot-pluggable CPUs" - depends on SMP && HOTPLUG + depends on SMP ---help--- Say Y here to allow turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1999,7 +2032,6 @@ menu "Bus options (PCI etc.)" config PCI bool "PCI support" default y - select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) ---help--- Find out whether you have a PCI motherboard. PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside @@ -2246,15 +2278,41 @@ source "drivers/pcmcia/Kconfig" source "drivers/pci/hotplug/Kconfig" config RAPIDIO - bool "RapidIO support" + tristate "RapidIO support" depends on PCI default n help - If you say Y here, the kernel will include drivers and + If enabled this option will include drivers and the core infrastructure code to support RapidIO interconnect devices. source "drivers/rapidio/Kconfig" +config X86_SYSFB + bool "Mark VGA/VBE/EFI FB as generic system framebuffer" + help + Firmwares often provide initial graphics framebuffers so the BIOS, + bootloader or kernel can show basic video-output during boot for + user-guidance and debugging. Historically, x86 used the VESA BIOS + Extensions and EFI-framebuffers for this, which are mostly limited + to x86. + This option, if enabled, marks VGA/VBE/EFI framebuffers as generic + framebuffers so the new generic system-framebuffer drivers can be + used on x86. If the framebuffer is not compatible with the generic + modes, it is adverticed as fallback platform framebuffer so legacy + drivers like efifb, vesafb and uvesafb can pick it up. + If this option is not selected, all system framebuffers are always + marked as fallback platform framebuffers as usual. + + Note: Legacy fbdev drivers, including vesafb, efifb, uvesafb, will + not be able to pick up generic system framebuffers if this option + is selected. You are highly encouraged to enable simplefb as + replacement if you select this option. simplefb can correctly deal + with generic system framebuffers. But you should still keep vesafb + and others enabled as fallback if a system framebuffer is + incompatible with simplefb. + + If unsure, say Y. + endmenu @@ -2265,6 +2323,7 @@ source "fs/Kconfig.binfmt" config IA32_EMULATION bool "IA32 Emulation" depends on X86_64 + select BINFMT_ELF select COMPAT_BINFMT_ELF select HAVE_UID16 ---help--- @@ -2316,10 +2375,6 @@ config HAVE_ATOMIC_IOMAP def_bool y depends on X86_32 -config HAVE_TEXT_POKE_SMP - bool - select STOP_MACHINE if SMP - config X86_DEV_DMA_OPS bool depends on X86_64 || STA2X11 |