summaryrefslogtreecommitdiffstats
path: root/arch/x86/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/Kconfig')
-rw-r--r--arch/x86/Kconfig62
1 files changed, 9 insertions, 53 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index e98e81a04971..e5deee2dfcfe 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -783,41 +783,17 @@ config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
increased on these systems.
config X86_MCE
- bool "Machine Check Exception"
+ bool "Machine Check / overheating reporting"
---help---
- Machine Check Exception support allows the processor to notify the
- kernel if it detects a problem (e.g. overheating, component failure).
+ Machine Check support allows the processor to notify the
+ kernel if it detects a problem (e.g. overheating, data corruption).
The action the kernel takes depends on the severity of the problem,
- ranging from a warning message on the console, to halting the machine.
- Your processor must be a Pentium or newer to support this - check the
- flags in /proc/cpuinfo for mce. Note that some older Pentium systems
- have a design flaw which leads to false MCE events - hence MCE is
- disabled on all P5 processors, unless explicitly enabled with "mce"
- as a boot argument. Similarly, if MCE is built in and creates a
- problem on some new non-standard machine, you can boot with "nomce"
- to disable it. MCE support simply ignores non-MCE processors like
- the 386 and 486, so nearly everyone can say Y here.
-
-config X86_OLD_MCE
- depends on X86_32 && X86_MCE
- bool "Use legacy machine check code (will go away)"
- default n
- select X86_ANCIENT_MCE
- ---help---
- Use the old i386 machine check code. This is merely intended for
- testing in a transition period. Try this if you run into any machine
- check related software problems, but report the problem to
- linux-kernel. When in doubt say no.
-
-config X86_NEW_MCE
- depends on X86_MCE
- bool
- default y if (!X86_OLD_MCE && X86_32) || X86_64
+ ranging from warning messages to halting the machine.
config X86_MCE_INTEL
def_bool y
prompt "Intel MCE features"
- depends on X86_NEW_MCE && X86_LOCAL_APIC
+ depends on X86_MCE && X86_LOCAL_APIC
---help---
Additional support for intel specific MCE features such as
the thermal monitor.
@@ -825,14 +801,14 @@ config X86_MCE_INTEL
config X86_MCE_AMD
def_bool y
prompt "AMD MCE features"
- depends on X86_NEW_MCE && X86_LOCAL_APIC
+ depends on X86_MCE && X86_LOCAL_APIC
---help---
Additional support for AMD specific MCE features such as
the DRAM Error Threshold.
config X86_ANCIENT_MCE
def_bool n
- depends on X86_32
+ depends on X86_32 && X86_MCE
prompt "Support for old Pentium 5 / WinChip machine checks"
---help---
Include support for machine check handling on old Pentium 5 or WinChip
@@ -845,36 +821,16 @@ config X86_MCE_THRESHOLD
default y
config X86_MCE_INJECT
- depends on X86_NEW_MCE
+ depends on X86_MCE
tristate "Machine check injector support"
---help---
Provide support for injecting machine checks for testing purposes.
If you don't know what a machine check is and you don't do kernel
QA it is safe to say n.
-config X86_MCE_NONFATAL
- tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
- depends on X86_OLD_MCE
- ---help---
- Enabling this feature starts a timer that triggers every 5 seconds which
- will look at the machine check registers to see if anything happened.
- Non-fatal problems automatically get corrected (but still logged).
- Disable this if you don't want to see these messages.
- Seeing the messages this option prints out may be indicative of dying
- or out-of-spec (ie, overclocked) hardware.
- This option only does something on certain CPUs.
- (AMD Athlon/Duron and Intel Pentium 4)
-
-config X86_MCE_P4THERMAL
- bool "check for P4 thermal throttling interrupt."
- depends on X86_OLD_MCE && X86_MCE && (X86_UP_APIC || SMP)
- ---help---
- Enabling this feature will cause a message to be printed when the P4
- enters thermal throttling.
-
config X86_THERMAL_VECTOR
def_bool y
- depends on X86_MCE_P4THERMAL || X86_MCE_INTEL
+ depends on X86_MCE_INTEL
config VM86
bool "Enable VM86 support" if EMBEDDED